0 files changed, 0 insertions, 0 deletions
diff --git a/arch/Kconfig b/arch/Kconfig
index f330410da63a..ebe08b9186ad 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -9,20 +9,24 @@
 #
 source "arch/$(SRCARCH)/Kconfig"
 
-menu "General architecture-dependent options"
-
-config CRASH_CORE
+config ARCH_CONFIGURES_CPU_MITIGATIONS
 	bool
 
-config KEXEC_CORE
-	select CRASH_CORE
-	bool
+if !ARCH_CONFIGURES_CPU_MITIGATIONS
+config CPU_MITIGATIONS
+	def_bool y
+endif
 
-config KEXEC_ELF
+#
+# Selected by architectures that need custom DMA operations for e.g. legacy
+# IOMMUs not handled by dma-iommu.  Drivers must never select this symbol.
+#
+config ARCH_HAS_DMA_OPS
+	depends on HAS_DMA
+	select DMA_OPS_HELPERS
 	bool
 
-config HAVE_IMA_KEXEC
-	bool
+menu "General architecture-dependent options"
 
 config ARCH_HAS_SUBPAGE_FAULTS
 	bool
@@ -34,15 +38,88 @@ config ARCH_HAS_SUBPAGE_FAULTS
 config HOTPLUG_SMT
 	bool
 
+config SMT_NUM_THREADS_DYNAMIC
+	bool
+
+config ARCH_SUPPORTS_SCHED_SMT
+	bool
+
+config ARCH_SUPPORTS_SCHED_CLUSTER
+	bool
+
+config ARCH_SUPPORTS_SCHED_MC
+	bool
+
+config SCHED_SMT
+	bool "SMT (Hyperthreading) scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_SMT
+	default y
+	help
+	  Improves the CPU scheduler's decision making when dealing with
+	  MultiThreading at a cost of slightly increased overhead in some
+	  places. If unsure say N here.
+
+config SCHED_CLUSTER
+	bool "Cluster scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_CLUSTER
+	default y
+	help
+	  Cluster scheduler support improves the CPU scheduler's decision
+	  making when dealing with machines that have clusters of CPUs.
+	  Cluster usually means a couple of CPUs which are placed closely
+	  by sharing mid-level caches, last-level cache tags or internal
+	  busses.
+
+config SCHED_MC
+	bool "Multi-Core Cache (MC) scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_MC
+	default y
+	help
+	  Multi-core scheduler support improves the CPU scheduler's decision
+	  making when dealing with multi-core CPU chips at a cost of slightly
+	  increased overhead in some places. If unsure say N here.
+
+# Selected by HOTPLUG_CORE_SYNC_DEAD or HOTPLUG_CORE_SYNC_FULL
+config HOTPLUG_CORE_SYNC
+	bool
+
+# Basic CPU dead synchronization selected by architecture
+config HOTPLUG_CORE_SYNC_DEAD
+	bool
+	select HOTPLUG_CORE_SYNC
+
+# Full CPU synchronization with alive state selected by architecture
+config HOTPLUG_CORE_SYNC_FULL
+	bool
+	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
+	select HOTPLUG_CORE_SYNC
+
+config HOTPLUG_SPLIT_STARTUP
+	bool
+	select HOTPLUG_CORE_SYNC_FULL
+
+config HOTPLUG_PARALLEL
+	bool
+	select HOTPLUG_SPLIT_STARTUP
+
+config GENERIC_IRQ_ENTRY
+	bool
+
+config GENERIC_SYSCALL
+	bool
+	depends on GENERIC_IRQ_ENTRY
+
 config GENERIC_ENTRY
-       bool
+	bool
+	select GENERIC_IRQ_ENTRY
+	select GENERIC_SYSCALL
 
 config KPROBES
 	bool "Kprobes"
-	depends on MODULES
 	depends on HAVE_KPROBES
 	select KALLSYMS
-	select TASKS_RCU if PREEMPTION
+	select EXECMEM
+	select NEED_TASKS_RCU
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes
@@ -53,29 +130,28 @@ config KPROBES
 config JUMP_LABEL
 	bool "Optimize very unlikely/likely branches"
 	depends on HAVE_ARCH_JUMP_LABEL
-	depends on CC_HAS_ASM_GOTO
 	select OBJTOOL if HAVE_JUMP_LABEL_HACK
 	help
-	 This option enables a transparent branch optimization that
-	 makes certain almost-always-true or almost-always-false branch
-	 conditions even cheaper to execute within the kernel.
+	  This option enables a transparent branch optimization that
+	  makes certain almost-always-true or almost-always-false branch
+	  conditions even cheaper to execute within the kernel.
 
-	 Certain performance-sensitive kernel code, such as trace points,
-	 scheduler functionality, networking code and KVM have such
-	 branches and include support for this optimization technique.
+	  Certain performance-sensitive kernel code, such as trace points,
+	  scheduler functionality, networking code and KVM have such
+	  branches and include support for this optimization technique.
 
-	 If it is detected that the compiler has support for "asm goto",
-	 the kernel will compile such branches with just a nop
-	 instruction. When the condition flag is toggled to true, the
-	 nop will be converted to a jump instruction to execute the
-	 conditional block of instructions.
+	  If it is detected that the compiler has support for "asm goto",
+	  the kernel will compile such branches with just a nop
+	  instruction. When the condition flag is toggled to true, the
+	  nop will be converted to a jump instruction to execute the
+	  conditional block of instructions.
 
-	 This technique lowers overhead and stress on the branch prediction
-	 of the processor and generally makes the kernel faster. The update
-	 of the condition is slower, but those are always very rare.
+	  This technique lowers overhead and stress on the branch prediction
+	  of the processor and generally makes the kernel faster. The update
+	  of the condition is slower, but those are always very rare.
 
-	 ( On 32-bit x86, the necessary options added to the compiler
-	   flags may increase the size of the kernel slightly. )
+	  ( On 32-bit x86, the necessary options added to the compiler
+	    flags may increase the size of the kernel slightly. )
 
 config STATIC_KEYS_SELFTEST
 	bool "Static key selftest"
@@ -92,20 +168,21 @@ config STATIC_CALL_SELFTEST
 config OPTPROBES
 	def_bool y
 	depends on KPROBES && HAVE_OPTPROBES
-	select TASKS_RCU if PREEMPTION
+	select NEED_TASKS_RCU
 
 config KPROBES_ON_FTRACE
 	def_bool y
 	depends on KPROBES && HAVE_KPROBES_ON_FTRACE
 	depends on DYNAMIC_FTRACE_WITH_REGS
 	help
-	 If function tracer is enabled and the arch supports full
-	 passing of pt_regs to function tracing, then kprobes can
-	 optimize on top of function tracing.
+	  If function tracer is enabled and the arch supports full
+	  passing of pt_regs to function tracing, then kprobes can
+	  optimize on top of function tracing.
 
 config UPROBES
 	def_bool n
 	depends on ARCH_SUPPORTS_UPROBES
+	select TASKS_TRACE_RCU
 	help
 	  Uprobes is the user-space counterpart to kprobes: they
 	  enable instrumentation applications (such as 'perf probe')
@@ -155,21 +232,21 @@ config HAVE_EFFICIENT_UNALIGNED_ACCESS
 config ARCH_USE_BUILTIN_BSWAP
 	bool
 	help
-	 Modern versions of GCC (since 4.4) have builtin functions
-	 for handling byte-swapping. Using these, instead of the old
-	 inline assembler that the architecture code provides in the
-	 __arch_bswapXX() macros, allows the compiler to see what's
-	 happening and offers more opportunity for optimisation. In
-	 particular, the compiler will be able to combine the byteswap
-	 with a nearby load or store and use load-and-swap or
-	 store-and-swap instructions if the architecture has them. It
-	 should almost *never* result in code which is worse than the
-	 hand-coded assembler in <asm/swab.h>.  But just in case it
-	 does, the use of the builtins is optional.
+	  Modern versions of GCC (since 4.4) have builtin functions
+	  for handling byte-swapping. Using these, instead of the old
+	  inline assembler that the architecture code provides in the
+	  __arch_bswapXX() macros, allows the compiler to see what's
+	  happening and offers more opportunity for optimisation. In
+	  particular, the compiler will be able to combine the byteswap
+	  with a nearby load or store and use load-and-swap or
+	  store-and-swap instructions if the architecture has them. It
+	  should almost *never* result in code which is worse than the
+	  hand-coded assembler in <asm/swab.h>.  But just in case it
+	  does, the use of the builtins is optional.
 
-	 Any architecture with load-and-swap or store-and-swap
-	 instructions should set this. And it shouldn't hurt to set it
-	 on architectures that don't have such instructions.
+	  Any architecture with load-and-swap or store-and-swap
+	  instructions should set this. And it shouldn't hurt to set it
+	  on architectures that don't have such instructions.
 
 config KRETPROBES
 	def_bool y
@@ -286,17 +363,16 @@ config ARCH_HAS_DMA_SET_UNCACHED
 config ARCH_HAS_DMA_CLEAR_UNCACHED
 	bool
 
-# Select if arch init_task must go in the __init_task_data section
-config ARCH_TASK_STRUCT_ON_STACK
+config ARCH_HAS_CPU_FINALIZE_INIT
 	bool
 
-# Select if arch has its private alloc_task_struct() function
-config ARCH_TASK_STRUCT_ALLOCATOR
+# The architecture has a per-task state that includes the mm's PASID
+config ARCH_HAS_CPU_PASID
 	bool
+	select IOMMU_MM_DATA
 
 config HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	bool
-	depends on !ARCH_TASK_STRUCT_ALLOCATOR
 	help
 	  An architecture should select this to provide hardened usercopy
 	  knowledge about what region of the thread_struct should be
@@ -305,10 +381,6 @@ config HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	  should be implemented. Without this, the entire thread_struct
 	  field in task_struct will be left whitelisted.
 
-# Select if arch has its private alloc_thread_stack() function
-config ARCH_THREAD_STACK_ALLOCATOR
-	bool
-
 # Select if arch wants to size task_struct dynamically via arch_task_struct_size:
 config ARCH_WANTS_DYNAMIC_TASK_STRUCT
 	bool
@@ -356,6 +428,12 @@ config HAVE_RSEQ
 	  This symbol should be selected by an architecture if it
 	  supports an implementation of restartable sequences.
 
+config HAVE_RUST
+	bool
+	help
+	  This symbol should be selected by an architecture if it
+	  supports Rust.
+
 config HAVE_FUNCTION_ARG_ACCESS_API
 	bool
 	help
@@ -395,20 +473,21 @@ config HAVE_HARDLOCKUP_DETECTOR_PERF
 	  The arch chooses to use the generic perf-NMI-based hardlockup
 	  detector. Must define HAVE_PERF_EVENTS_NMI.
 
-config HAVE_NMI_WATCHDOG
-	depends on HAVE_NMI
+config HAVE_HARDLOCKUP_DETECTOR_ARCH
 	bool
 	help
-	  The arch provides a low level NMI watchdog. It provides
-	  asm/nmi.h, and defines its own arch_touch_nmi_watchdog().
+	  The arch provides its own hardlockup detector implementation instead
+	  of the generic ones.
 
-config HAVE_HARDLOCKUP_DETECTOR_ARCH
+	  It uses the same command line parameters, and sysctl interface,
+	  as the generic hardlockup detectors.
+
+config UNWIND_USER
 	bool
-	select HAVE_NMI_WATCHDOG
-	help
-	  The arch chooses to provide its own hardlockup detector, which is
-	  a superset of the HAVE_NMI_WATCHDOG. It also conforms to config
-	  interfaces and parameters provided by hardlockup detector subsystem.
+
+config HAVE_UNWIND_USER_FP
+	bool
+	select UNWIND_USER
 
 config HAVE_PERF_REGS
 	bool
@@ -460,9 +539,53 @@ config ARCH_WANT_IRQS_OFF_ACTIVATE_MM
 	  irqs disabled over activate_mm. Architectures that do IPI based TLB
 	  shootdowns should enable this.
 
+# Use normal mm refcounting for MMU_LAZY_TLB kernel thread references.
+# MMU_LAZY_TLB_REFCOUNT=n can improve the scalability of context switching
+# to/from kernel threads when the same mm is running on a lot of CPUs (a large
+# multi-threaded application), by reducing contention on the mm refcount.
+#
+# This can be disabled if the architecture ensures no CPUs are using an mm as a
+# "lazy tlb" beyond its final refcount (i.e., by the time __mmdrop frees the mm
+# or its kernel page tables). This could be arranged by arch_exit_mmap(), or
+# final exit(2) TLB flush, for example.
+#
+# To implement this, an arch *must*:
+# Ensure the _lazy_tlb variants of mmgrab/mmdrop are used when manipulating
+# the lazy tlb reference of a kthread's ->active_mm (non-arch code has been
+# converted already).
+config MMU_LAZY_TLB_REFCOUNT
+	def_bool y
+	depends on !MMU_LAZY_TLB_SHOOTDOWN
+
+# This option allows MMU_LAZY_TLB_REFCOUNT=n. It ensures no CPUs are using an
+# mm as a lazy tlb beyond its last reference count, by shooting down these
+# users before the mm is deallocated. __mmdrop() first IPIs all CPUs that may
+# be using the mm as a lazy tlb, so that they may switch themselves to using
+# init_mm for their active mm. mm_cpumask(mm) is used to determine which CPUs
+# may be using mm as a lazy tlb mm.
+#
+# To implement this, an arch *must*:
+# - At the time of the final mmdrop of the mm, ensure mm_cpumask(mm) contains
+#   at least all possible CPUs in which the mm is lazy.
+# - It must meet the requirements for MMU_LAZY_TLB_REFCOUNT=n (see above).
+config MMU_LAZY_TLB_SHOOTDOWN
+	bool
+
 config ARCH_HAVE_NMI_SAFE_CMPXCHG
 	bool
 
+config ARCH_HAVE_EXTRA_ELF_NOTES
+	bool
+	help
+	  An architecture should select this in order to enable adding an
+	  arch-specific ELF note section to core files. It must provide two
+	  functions: elf_coredump_extra_notes_size() and
+	  elf_coredump_extra_notes_write() which are invoked by the ELF core
+	  dumper.
+
+config ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
+	bool
+
 config HAVE_ALIGNED_STRUCT_PAGE
 	bool
 	help
@@ -561,11 +684,11 @@ config SECCOMP_CACHE_DEBUG
 
 	  If unsure, say N.
 
-config HAVE_ARCH_STACKLEAK
+config HAVE_ARCH_KSTACK_ERASE
 	bool
 	help
 	  An architecture should select this if it has the code which
-	  fills the used part of the kernel stack with the STACKLEAK_POISON
+	  fills the used part of the kernel stack with the KSTACK_ERASE_POISON
 	  value before returning from system calls.
 
 config HAVE_STACKPROTECTOR
@@ -630,7 +753,8 @@ config ARCH_SUPPORTS_SHADOW_CALL_STACK
 config SHADOW_CALL_STACK
 	bool "Shadow Call Stack"
 	depends on ARCH_SUPPORTS_SHADOW_CALL_STACK
-	depends on DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
+	depends on DYNAMIC_FTRACE_WITH_ARGS || DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
+	depends on MMU
 	help
 	  This option enables the compiler's Shadow Call Stack, which
 	  uses a shadow stack to protect function return addresses from
@@ -646,6 +770,13 @@ config SHADOW_CALL_STACK
 	  reading and writing arbitrary memory may be able to locate them
 	  and hijack control flow by modifying the stacks.
 
+config DYNAMIC_SCS
+	bool
+	help
+	  Set by the arch code if it relies on code patching to insert the
+	  shadow call stack push and pop instructions rather than on the
+	  compiler.
+
 config LTO
 	bool
 	help
@@ -678,7 +809,9 @@ config HAS_LTO_CLANG
 	depends on $(success,$(AR) --help | head -n 1 | grep -qi llvm)
 	depends on ARCH_SUPPORTS_LTO_CLANG
 	depends on !FTRACE_MCOUNT_USE_RECORDMCOUNT
-	depends on !KASAN || KASAN_HW_TAGS
+	# https://github.com/ClangBuiltLinux/linux/issues/1721
+	depends on (!KASAN || KASAN_HW_TAGS || CLANG_VERSION >= 170000) || !DEBUG_INFO
+	depends on (!KCOV || CLANG_VERSION >= 170000) || !DEBUG_INFO
 	depends on !GCOV_KERNEL
 	help
 	  The compiler and Kconfig options support building with Clang's
@@ -705,13 +838,13 @@ config LTO_CLANG_FULL
 	depends on !COMPILE_TEST
 	select LTO_CLANG
 	help
-          This option enables Clang's full Link Time Optimization (LTO), which
-          allows the compiler to optimize the kernel globally. If you enable
-          this option, the compiler generates LLVM bitcode instead of ELF
-          object files, and the actual compilation from bitcode happens at
-          the LTO link step, which may take several minutes depending on the
-          kernel configuration. More information can be found from LLVM's
-          documentation:
+	  This option enables Clang's full Link Time Optimization (LTO), which
+	  allows the compiler to optimize the kernel globally. If you enable
+	  this option, the compiler generates LLVM bitcode instead of ELF
+	  object files, and the actual compilation from bitcode happens at
+	  the LTO link step, which may take several minutes depending on the
+	  kernel configuration. More information can be found from LLVM's
+	  documentation:
 
 	    https://llvm.org/docs/LinkTimeOptimization.html
 
@@ -733,20 +866,65 @@ config LTO_CLANG_THIN
 	  If unsure, say Y.
 endchoice
 
-config ARCH_SUPPORTS_CFI_CLANG
+config ARCH_SUPPORTS_AUTOFDO_CLANG
 	bool
+
+config AUTOFDO_CLANG
+	bool "Enable Clang's AutoFDO build (EXPERIMENTAL)"
+	depends on ARCH_SUPPORTS_AUTOFDO_CLANG
+	depends on CC_IS_CLANG && CLANG_VERSION >= 170000
 	help
-	  An architecture should select this option if it can support Clang's
-	  Control-Flow Integrity (CFI) checking.
+	  This option enables Clang’s AutoFDO build. When
+	  an AutoFDO profile is specified in variable
+	  CLANG_AUTOFDO_PROFILE during the build process,
+	  Clang uses the profile to optimize the kernel.
 
-config CFI_CLANG
-	bool "Use Clang's Control Flow Integrity (CFI)"
-	depends on LTO_CLANG && ARCH_SUPPORTS_CFI_CLANG
-	depends on CLANG_VERSION >= 140000
-	select KALLSYMS
+	  If no profile is specified, AutoFDO options are
+	  still passed to Clang to facilitate the collection
+	  of perf data for creating an AutoFDO profile in
+	  subsequent builds.
+
+	  If unsure, say N.
+
+config ARCH_SUPPORTS_PROPELLER_CLANG
+	bool
+
+config PROPELLER_CLANG
+	bool "Enable Clang's Propeller build"
+	depends on ARCH_SUPPORTS_PROPELLER_CLANG
+	depends on CC_IS_CLANG && CLANG_VERSION >= 190000
+	help
+	  This option enables Clang’s Propeller build. When the Propeller
+	  profiles is specified in variable CLANG_PROPELLER_PROFILE_PREFIX
+	  during the build process, Clang uses the profiles to optimize
+	  the kernel.
+
+	  If no profile is specified, Propeller options are still passed
+	  to Clang to facilitate the collection of perf data for creating
+	  the Propeller profiles in subsequent builds.
+
+	  If unsure, say N.
+
+config ARCH_SUPPORTS_CFI
+	bool
 	help
-	  This option enables Clang’s forward-edge Control Flow Integrity
-	  (CFI) checking, where the compiler injects a runtime check to each
+	  An architecture should select this option if it can support Kernel
+	  Control-Flow Integrity (CFI) checking (-fsanitize=kcfi).
+
+config ARCH_USES_CFI_TRAPS
+	bool
+	help
+	  An architecture should select this option if it requires the
+	  .kcfi_traps section for KCFI trap handling.
+
+config CFI
+	bool "Use Kernel Control Flow Integrity (kCFI)"
+	default CFI_CLANG
+	depends on ARCH_SUPPORTS_CFI
+	depends on $(cc-option,-fsanitize=kcfi)
+	help
+	  This option enables forward-edge Control Flow Integrity (CFI)
+	  checking, where the compiler injects a runtime check to each
 	  indirect function call to ensure the target is a valid function with
 	  the correct static type. This restricts possible call targets and
 	  makes it more difficult for an attacker to exploit bugs that allow
@@ -755,19 +933,45 @@ config CFI_CLANG
 
 	    https://clang.llvm.org/docs/ControlFlowIntegrity.html
 
-config CFI_CLANG_SHADOW
-	bool "Use CFI shadow to speed up cross-module checks"
-	default y
-	depends on CFI_CLANG && MODULES
+config CFI_CLANG
+	bool
+	transitional
 	help
-	  If you select this option, the kernel builds a fast look-up table of
-	  CFI check functions in loaded modules to reduce performance overhead.
+	  Transitional config for CFI_CLANG to CFI migration.
 
-	  If unsure, say Y.
+config CFI_ICALL_NORMALIZE_INTEGERS
+	bool "Normalize CFI tags for integers"
+	depends on CFI
+	depends on HAVE_CFI_ICALL_NORMALIZE_INTEGERS
+	help
+	  This option normalizes the CFI tags for integer types so that all
+	  integer types of the same size and signedness receive the same CFI
+	  tag.
+
+	  The option is separate from CONFIG_RUST because it affects the ABI.
+	  When working with build systems that care about the ABI, it is
+	  convenient to be able to turn on this flag first, before Rust is
+	  turned on.
+
+	  This option is necessary for using CFI with Rust. If unsure, say N.
+
+config HAVE_CFI_ICALL_NORMALIZE_INTEGERS
+	def_bool y
+	depends on $(cc-option,-fsanitize=kcfi -fsanitize-cfi-icall-experimental-normalize-integers)
+	# With GCOV/KASAN we need this fix: https://github.com/llvm/llvm-project/pull/104826
+	depends on CLANG_VERSION >= 190103 || (!GCOV_KERNEL && !KASAN_GENERIC && !KASAN_SW_TAGS)
+
+config HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTC
+	def_bool y
+	depends on HAVE_CFI_ICALL_NORMALIZE_INTEGERS
+	depends on RUSTC_VERSION >= 107900
+	# With GCOV/KASAN we need this fix: https://github.com/rust-lang/rust/pull/129373
+	depends on (RUSTC_LLVM_VERSION >= 190103 && RUSTC_VERSION >= 108200) || \
+		(!GCOV_KERNEL && !KASAN_GENERIC && !KASAN_SW_TAGS)
 
 config CFI_PERMISSIVE
 	bool "Use CFI in permissive mode"
-	depends on CFI_CLANG
+	depends on CFI
 	help
 	  When selected, Control Flow Integrity (CFI) violations result in a
 	  warning instead of a kernel panic. This option should only be used
@@ -801,7 +1005,7 @@ config HAVE_CONTEXT_TRACKING_USER_OFFSTACK
 	  Architecture neither relies on exception_enter()/exception_exit()
 	  nor on schedule_user(). Also preempt_schedule_notrace() and
 	  preempt_schedule_irq() can't be called in a preemptible section
-	  while context tracking is CONTEXT_USER. This feature reflects a sane
+	  while context tracking is CT_STATE_USER. This feature reflects a sane
 	  entry implementation where the following requirements are met on
 	  critical entry code, ie: before user_exit() or after user_enter():
 
@@ -880,6 +1084,14 @@ config HAVE_ARCH_HUGE_VMALLOC
 config ARCH_WANT_HUGE_PMD_SHARE
 	bool
 
+# Archs that want to use pmd_mkwrite on kernel memory need it defined even
+# if there are no userspace memory management features that use it
+config ARCH_WANT_KERNEL_PMD_MKWRITE
+	bool
+
+config ARCH_WANT_PMD_MKWRITE
+	def_bool TRANSPARENT_HUGEPAGE || ARCH_WANT_KERNEL_PMD_MKWRITE
+
 config HAVE_ARCH_SOFT_DIRTY
 	bool
 
@@ -908,6 +1120,22 @@ config ARCH_WANTS_MODULES_DATA_IN_VMALLOC
 	  For architectures like powerpc/32 which have constraints on module
 	  allocation and need to allocate module data outside of module area.
 
+config ARCH_WANTS_EXECMEM_LATE
+	bool
+	help
+	  For architectures that do not allocate executable memory early on
+	  boot, but rather require its initialization late when there is
+	  enough entropy for module space randomization, for instance
+	  arm64.
+
+config ARCH_HAS_EXECMEM_ROX
+	bool
+	depends on MMU && !HIGHMEM
+	help
+	  For architectures that support allocations of executable memory
+	  with read-only execute permissions. Architecture must implement
+	  execmem_fill_trapping_insns() callback to enable this.
+
 config HAVE_IRQ_EXIT_ON_IRQ_STACK
 	bool
 	help
@@ -924,6 +1152,9 @@ config HAVE_SOFTIRQ_ON_OWN_STACK
 	  Architecture provides a function to run __do_softirq() on a
 	  separate stack.
 
+config SOFTIRQ_ON_OWN_STACK
+	def_bool HAVE_SOFTIRQ_ON_OWN_STACK && !PREEMPT_RT
+
 config ALTERNATE_USER_ADDRESS_SPACE
 	bool
 	help
@@ -1023,18 +1254,107 @@ config HAVE_ARCH_COMPAT_MMAP_BASES
 	  and vice-versa 32-bit applications to call 64-bit mmap().
 	  Required for applications doing different bitness syscalls.
 
+config HAVE_PAGE_SIZE_4KB
+	bool
+
+config HAVE_PAGE_SIZE_8KB
+	bool
+
+config HAVE_PAGE_SIZE_16KB
+	bool
+
+config HAVE_PAGE_SIZE_32KB
+	bool
+
+config HAVE_PAGE_SIZE_64KB
+	bool
+
+config HAVE_PAGE_SIZE_256KB
+	bool
+
+choice
+	prompt "MMU page size"
+
+config PAGE_SIZE_4KB
+	bool "4KiB pages"
+	depends on HAVE_PAGE_SIZE_4KB
+	help
+	  This option select the standard 4KiB Linux page size and the only
+	  available option on many architectures. Using 4KiB page size will
+	  minimize memory consumption and is therefore recommended for low
+	  memory systems.
+	  Some software that is written for x86 systems makes incorrect
+	  assumptions about the page size and only runs on 4KiB pages.
+
+config PAGE_SIZE_8KB
+	bool "8KiB pages"
+	depends on HAVE_PAGE_SIZE_8KB
+	help
+	  This option is the only supported page size on a few older
+	  processors, and can be slightly faster than 4KiB pages.
+
+config PAGE_SIZE_16KB
+	bool "16KiB pages"
+	depends on HAVE_PAGE_SIZE_16KB
+	help
+	  This option is usually a good compromise between memory
+	  consumption and performance for typical desktop and server
+	  workloads, often saving a level of page table lookups compared
+	  to 4KB pages as well as reducing TLB pressure and overhead of
+	  per-page operations in the kernel at the expense of a larger
+	  page cache.
+
+config PAGE_SIZE_32KB
+	bool "32KiB pages"
+	depends on HAVE_PAGE_SIZE_32KB
+	help
+	  Using 32KiB page size will result in slightly higher performance
+	  kernel at the price of higher memory consumption compared to
+	  16KiB pages.	This option is available only on cnMIPS cores.
+	  Note that you will need a suitable Linux distribution to
+	  support this.
+
+config PAGE_SIZE_64KB
+	bool "64KiB pages"
+	depends on HAVE_PAGE_SIZE_64KB
+	help
+	  Using 64KiB page size will result in slightly higher performance
+	  kernel at the price of much higher memory consumption compared to
+	  4KiB or 16KiB pages.
+	  This is not suitable for general-purpose workloads but the
+	  better performance may be worth the cost for certain types of
+	  supercomputing or database applications that work mostly with
+	  large in-memory data rather than small files.
+
+config PAGE_SIZE_256KB
+	bool "256KiB pages"
+	depends on HAVE_PAGE_SIZE_256KB
+	help
+	  256KiB pages have little practical value due to their extreme
+	  memory usage.  The kernel will only be able to run applications
+	  that have been compiled with '-zmax-page-size' set to 256KiB
+	  (the default is 64KiB or 4KiB on most architectures).
+
+endchoice
+
 config PAGE_SIZE_LESS_THAN_64KB
 	def_bool y
-	depends on !ARM64_64K_PAGES
-	depends on !IA64_PAGE_SIZE_64KB
 	depends on !PAGE_SIZE_64KB
-	depends on !PARISC_PAGE_SIZE_64KB
 	depends on PAGE_SIZE_LESS_THAN_256KB
 
 config PAGE_SIZE_LESS_THAN_256KB
 	def_bool y
 	depends on !PAGE_SIZE_256KB
 
+config PAGE_SHIFT
+	int
+	default	12 if PAGE_SIZE_4KB
+	default	13 if PAGE_SIZE_8KB
+	default	14 if PAGE_SIZE_16KB
+	default	15 if PAGE_SIZE_32KB
+	default	16 if PAGE_SIZE_64KB
+	default	18 if PAGE_SIZE_256KB
+
 # This allows to use a set of generic functions to determine mmap base
 # address by giving priority to top-down scheme only if the process
 # is not in legacy mode (compat task, unlimited stack size or
@@ -1146,13 +1466,6 @@ config COMPAT_32BIT_TIME
 config ARCH_NO_PREEMPT
 	bool
 
-config ARCH_EPHEMERAL_INODES
-	def_bool n
-	help
-	  An arch should select this symbol if it doesn't keep track of inode
-	  instances on its own, but instead relies on something else (e.g. the
-	  host kernel for an UML kernel).
-
 config ARCH_SUPPORTS_RT
 	bool
 
@@ -1210,7 +1523,6 @@ config RANDOMIZE_KSTACK_OFFSET
 	bool "Support for randomizing kernel stack offset on syscall entry" if EXPERT
 	default y
 	depends on HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
-	depends on INIT_STACK_NONE || !CC_IS_CLANG || CLANG_VERSION >= 140000
 	help
 	  The kernel stack offset can be randomized (after pt_regs) by
 	  roughly 5 bits of entropy, frustrating memory corruption
@@ -1269,6 +1581,14 @@ config STRICT_MODULE_RWX
 config ARCH_HAS_PHYS_TO_DMA
 	bool
 
+config ARCH_HAS_CPU_RESCTRL
+	bool
+	help
+	  An architecture selects this option to indicate that the necessary
+	  hooks are provided to support the common memory system usage
+	  monitoring and control interfaces provided by the 'resctrl'
+	  filesystem (see RESCTRL_FS).
+
 config HAVE_ARCH_COMPILER_H
 	bool
 	help
@@ -1277,6 +1597,14 @@ config HAVE_ARCH_COMPILER_H
 	  linux/compiler-*.h in order to override macro definitions that those
 	  headers generally provide.
 
+config HAVE_ARCH_LIBGCC_H
+	bool
+	help
+	  An architecture can select this if it provides an
+	  asm/libgcc.h header that should be included after
+	  linux/libgcc.h in order to override macro definitions that
+	  header generally provides.
+
 config HAVE_ARCH_PREL32_RELOCATIONS
 	bool
 	help
@@ -1320,14 +1648,18 @@ config ARCH_HAS_CC_PLATFORM
 	bool
 
 config HAVE_SPARSE_SYSCALL_NR
-       bool
-       help
-          An architecture should select this if its syscall numbering is sparse
+	bool
+	help
+	  An architecture should select this if its syscall numbering is sparse
 	  to save space. For example, MIPS architecture has a syscall array with
 	  entries at 4000, 5000 and 6000 locations. This option turns on syscall
 	  related optimizations for a given architecture.
 
-config ARCH_HAS_VDSO_DATA
+config ARCH_HAS_VDSO_ARCH_DATA
+	depends on HAVE_GENERIC_VDSO
+	bool
+
+config ARCH_HAS_VDSO_TIME_DATA
 	bool
 
 config HAVE_STATIC_CALL
@@ -1346,35 +1678,35 @@ config HAVE_PREEMPT_DYNAMIC_CALL
 	depends on HAVE_STATIC_CALL
 	select HAVE_PREEMPT_DYNAMIC
 	help
-	   An architecture should select this if it can handle the preemption
-	   model being selected at boot time using static calls.
+	  An architecture should select this if it can handle the preemption
+	  model being selected at boot time using static calls.
 
-	   Where an architecture selects HAVE_STATIC_CALL_INLINE, any call to a
-	   preemption function will be patched directly.
+	  Where an architecture selects HAVE_STATIC_CALL_INLINE, any call to a
+	  preemption function will be patched directly.
 
-	   Where an architecture does not select HAVE_STATIC_CALL_INLINE, any
-	   call to a preemption function will go through a trampoline, and the
-	   trampoline will be patched.
+	  Where an architecture does not select HAVE_STATIC_CALL_INLINE, any
+	  call to a preemption function will go through a trampoline, and the
+	  trampoline will be patched.
 
-	   It is strongly advised to support inline static call to avoid any
-	   overhead.
+	  It is strongly advised to support inline static call to avoid any
+	  overhead.
 
 config HAVE_PREEMPT_DYNAMIC_KEY
 	bool
-	depends on HAVE_ARCH_JUMP_LABEL && CC_HAS_ASM_GOTO
+	depends on HAVE_ARCH_JUMP_LABEL
 	select HAVE_PREEMPT_DYNAMIC
 	help
-	   An architecture should select this if it can handle the preemption
-	   model being selected at boot time using static keys.
+	  An architecture should select this if it can handle the preemption
+	  model being selected at boot time using static keys.
 
-	   Each preemption function will be given an early return based on a
-	   static key. This should have slightly lower overhead than non-inline
-	   static calls, as this effectively inlines each trampoline into the
-	   start of its callee. This may avoid redundant work, and may
-	   integrate better with CFI schemes.
+	  Each preemption function will be given an early return based on a
+	  static key. This should have slightly lower overhead than non-inline
+	  static calls, as this effectively inlines each trampoline into the
+	  start of its callee. This may avoid redundant work, and may
+	  integrate better with CFI schemes.
 
-	   This will have greater overhead than using inline static calls as
-	   the call to the preemption function cannot be entirely elided.
+	  This will have greater overhead than using inline static calls as
+	  the call to the preemption function cannot be entirely elided.
 
 config ARCH_WANT_LD_ORPHAN_WARN
 	bool
@@ -1397,8 +1729,8 @@ config ARCH_SUPPORTS_PAGE_TABLE_CHECK
 config ARCH_SPLIT_ARG64
 	bool
 	help
-	   If a 32-bit architecture requires 64-bit arguments to be split into
-	   pairs of 32-bit arguments, select this option.
+	  If a 32-bit architecture requires 64-bit arguments to be split into
+	  pairs of 32-bit arguments, select this option.
 
 config ARCH_HAS_ELFCORE_COMPAT
 	bool
@@ -1416,8 +1748,89 @@ config DYNAMIC_SIGFRAME
 config HAVE_ARCH_NODE_DEV_GROUP
 	bool
 
+config ARCH_HAS_HW_PTE_YOUNG
+	bool
+	help
+	  Architectures that select this option are capable of setting the
+	  accessed bit in PTE entries when using them as part of linear address
+	  translations. Architectures that require runtime check should select
+	  this option and override arch_has_hw_pte_young().
+
+config ARCH_HAS_NONLEAF_PMD_YOUNG
+	bool
+	help
+	  Architectures that select this option are capable of setting the
+	  accessed bit in non-leaf PMD entries when using them as part of linear
+	  address translations. Page table walkers that clear the accessed bit
+	  may use this capability to reduce their search space.
+
+config ARCH_HAS_KERNEL_FPU_SUPPORT
+	bool
+	help
+	  Architectures that select this option can run floating-point code in
+	  the kernel, as described in Documentation/core-api/floating-point.rst.
+
+config ARCH_VMLINUX_NEEDS_RELOCS
+	bool
+	help
+	  Whether the architecture needs vmlinux to be built with static
+	  relocations preserved. This is used by some architectures to
+	  construct bespoke relocation tables for KASLR.
+
+# Select if architecture uses the common generic TIF bits
+config HAVE_GENERIC_TIF_BITS
+       bool
+
 source "kernel/gcov/Kconfig"
 
 source "scripts/gcc-plugins/Kconfig"
 
+config FUNCTION_ALIGNMENT_4B
+	bool
+
+config FUNCTION_ALIGNMENT_8B
+	bool
+
+config FUNCTION_ALIGNMENT_16B
+	bool
+
+config FUNCTION_ALIGNMENT_32B
+	bool
+
+config FUNCTION_ALIGNMENT_64B
+	bool
+
+config FUNCTION_ALIGNMENT
+	int
+	default 64 if FUNCTION_ALIGNMENT_64B
+	default 32 if FUNCTION_ALIGNMENT_32B
+	default 16 if FUNCTION_ALIGNMENT_16B
+	default 8 if FUNCTION_ALIGNMENT_8B
+	default 4 if FUNCTION_ALIGNMENT_4B
+	default 0
+
+config CC_HAS_MIN_FUNCTION_ALIGNMENT
+	# Detect availability of the GCC option -fmin-function-alignment which
+	# guarantees minimal alignment for all functions, unlike
+	# -falign-functions which the compiler ignores for cold functions.
+	def_bool $(cc-option, -fmin-function-alignment=8)
+
+config CC_HAS_SANE_FUNCTION_ALIGNMENT
+	# Set if the guaranteed alignment with -fmin-function-alignment is
+	# available or extra care is required in the kernel. Clang provides
+	# strict alignment always, even with -falign-functions.
+	def_bool CC_HAS_MIN_FUNCTION_ALIGNMENT || CC_IS_CLANG
+
+config ARCH_NEED_CMPXCHG_1_EMU
+	bool
+
+config ARCH_WANTS_PRE_LINK_VMLINUX
+	bool
+	help
+	  An architecture can select this if it provides arch/<arch>/tools/Makefile
+	  with .arch.vmlinux.o target to be linked into vmlinux.
+
+config ARCH_HAS_CPU_ATTACK_VECTORS
+	bool
+
 endmenu
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 97fce7386b00..80367f2cf821 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -3,16 +3,19 @@ config ALPHA
 	bool
 	default y
 	select ARCH_32BIT_USTAT_F_TINODE
+	select ARCH_HAS_CURRENT_STACK_POINTER
+	select ARCH_HAS_DMA_OPS if PCI
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
+	select ARCH_MODULE_NEEDS_WEAK_PER_CPU if SMP
 	select ARCH_NO_PREEMPT
 	select ARCH_NO_SG_CHAIN
 	select ARCH_USE_CMPXCHG_LOCKREF
-	select DMA_OPS if PCI
-	select FORCE_PCI if !ALPHA_JENSEN
+	select FORCE_PCI
 	select PCI_DOMAINS if PCI
 	select PCI_SYSCALL if PCI
 	select HAVE_ASM_MODVERSIONS
+	select HAVE_PAGE_SIZE_8KB
 	select HAVE_PCSPKR_PLATFORM
 	select HAVE_PERF_EVENTS
 	select NEED_DMA_MAP_STATE
@@ -26,8 +29,10 @@ config ALPHA
 	select AUDIT_ARCH
 	select GENERIC_CPU_VULNERABILITIES
 	select GENERIC_SMP_IDLE_THREAD
+	select HAS_IOPORT
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_MOD_ARCH_SPECIFIC
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
 	select ODD_RT_SIGACTION
 	select OLD_SIGSUSPEND
@@ -86,22 +91,11 @@ choice
 	  <http://www.alphalinux.org/>. In summary:
 
 	  Alcor/Alpha-XLT     AS 600, AS 500, XL-300, XL-366
-	  Alpha-XL            XL-233, XL-266
-	  AlphaBook1          Alpha laptop
-	  Avanti              AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
-	  Cabriolet           AlphaPC64, AlphaPCI64
 	  DP264               DP264 / DS20 / ES40 / DS10 / DS10L
-	  EB164               EB164 21164 evaluation board
-	  EB64+               EB64+ 21064 evaluation board
-	  EB66                EB66 21066 evaluation board
-	  EB66+               EB66+ 21066 evaluation board
-	  Jensen              DECpc 150, DEC 2000 models 300, 500
 	  LX164               AlphaPC164-LX
-	  Lynx                AS 2100A
 	  Miata               Personal Workstation 433/500/600 a/au
 	  Marvel              AlphaServer ES47 / ES80 / GS1280
 	  Mikasa              AS 1000
-	  Noname              AXPpci33, UDB (Multia)
 	  Noritake            AS 1000A, AS 600A, AS 800
 	  PC164               AlphaPC164
 	  Rawhide             AS 1200, AS 4000, AS 4100
@@ -133,27 +127,6 @@ config ALPHA_ALCOR
 	  all the work required to support an external Bcache and to maintain
 	  memory coherence when a PCI device DMAs into (or out of) memory.
 
-config ALPHA_XL
-	bool "Alpha-XL"
-	help
-	  XL-233 and XL-266-based Alpha systems.
-
-config ALPHA_BOOK1
-	bool "AlphaBook1"
-	help
-	  Dec AlphaBook1/Burns Alpha-based laptops.
-
-config ALPHA_AVANTI_CH
-	bool "Avanti"
-
-config ALPHA_CABRIOLET
-	bool "Cabriolet"
-	help
-	  Cabriolet AlphaPC64, AlphaPCI64 systems.  Derived from EB64+ but now
-	  baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
-	  slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
-	  Bcache SIMMs.  Requires power supply with 3.3V output.
-
 config ALPHA_DP264
 	bool "DP264"
 	help
@@ -161,62 +134,18 @@ config ALPHA_DP264
 	  API Networks: 264DP, UP2000(+), CS20;
 	  Compaq: DS10(E,L), XP900, XP1000, DS20(E), ES40.
 
-config ALPHA_EB164
-	bool "EB164"
-	help
-	  EB164 21164 evaluation board from DEC.  Uses 21164 and ALCOR.  Has
-	  ISA and PCI expansion (3 ISA slots, 2 64-bit PCI slots (one is
-	  shared with an ISA slot) and 2 32-bit PCI slots.  Uses plus-in
-	  Bcache SIMMs. I/O sub-system provides SuperI/O (2S, 1P, FD), KBD,
-	  MOUSE (PS2 style), RTC/NVRAM.  Boot ROM is Flash.  PC-AT-sized
-	  motherboard.  Requires power supply with 3.3V output.
-
-config ALPHA_EB64P_CH
-	bool "EB64+"
-
-config ALPHA_EB66
-	bool "EB66"
-	help
-	  A Digital DS group board.  Uses 21066 or 21066A.  I/O sub-system is
-	  identical to EB64+.  Baby PC-AT size.  Runs from standard PC power
-	  supply.  The EB66 schematic was published as a marketing poster
-	  advertising the 21066 as "the first microprocessor in the world with
-	  embedded PCI".
-
-config ALPHA_EB66P
-	bool "EB66+"
-	help
-	  Later variant of the EB66 board.
-
 config ALPHA_EIGER
 	bool "Eiger"
 	help
 	  Apparently an obscure OEM single-board computer based on the
 	  Typhoon/Tsunami chipset family. Information on it is scanty.
 
-config ALPHA_JENSEN
-	bool "Jensen"
-	select HAVE_EISA
-	help
-	  DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
-	  of the first-generation Alpha systems. A number of these systems
-	  seem to be available on the second- hand market. The Jensen is a
-	  floor-standing tower system which originally used a 150MHz 21064 It
-	  used programmable logic to interface a 486 EISA I/O bridge to the
-	  CPU.
-
 config ALPHA_LX164
 	bool "LX164"
 	help
 	  A technical overview of this board is available at
 	  <http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>.
 
-config ALPHA_LYNX
-	bool "Lynx"
-	select HAVE_EISA
-	help
-	  AlphaServer 2100A-based systems.
-
 config ALPHA_MARVEL
 	bool "Marvel"
 	help
@@ -239,9 +168,6 @@ config ALPHA_NAUTILUS
 	help
 	  Alpha systems based on the AMD 751 & ALI 1543C chipsets.
 
-config ALPHA_NONAME_CH
-	bool "Noname"
-
 config ALPHA_NORITAKE
 	bool "Noritake"
 	select HAVE_EISA
@@ -252,9 +178,6 @@ config ALPHA_NORITAKE
 config ALPHA_PC164
 	bool "PC164"
 
-config ALPHA_P2K
-	bool "Platform2000"
-
 config ALPHA_RAWHIDE
 	bool "Rawhide"
 	select HAVE_EISA
@@ -318,91 +241,18 @@ config ISA_DMA_API
 	bool
 	default y
 
-config ALPHA_NONAME
-	bool
-	depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
-	default y
-	help
-	  The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
-	  UDB).  This design was produced by Digital's Technical OEM (TOEM)
-	  group. It uses the 21066 processor running at 166MHz or 233MHz. It
-	  is a baby-AT size, and runs from a standard PC power supply. It has
-	  5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
-	  2 versions, with either PS/2 or large DIN connectors for the
-	  keyboard.
-
-config ALPHA_EV4
-	bool
-	depends on ALPHA_JENSEN || (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
-	default y if !ALPHA_LYNX
-
-config ALPHA_LCA
-	bool
-	depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
-	default y
-
-config ALPHA_APECS
-	bool
-	depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL
-	default y
-
-config ALPHA_EB64P
-	bool
-	depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH
-	default y
-	help
-	  Uses 21064 or 21064A and APECs.  Has ISA and PCI expansion (3 ISA,
-	  2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
-	  ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
-	  (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
-	  SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM.  PC-AT size.
-	  Runs from standard PC power supply.
-
-config ALPHA_EV5
-	bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_LYNX
-	default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE && ALPHA_GAMMA || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
-
-config ALPHA_EV4
-	bool
-	default y if ALPHA_LYNX && !ALPHA_EV5
-
 config ALPHA_CIA
 	bool
-	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
+	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_ALCOR
 	default y
 
 config ALPHA_EV56
-	bool "EV56 CPU (speed >= 366MHz)?" if ALPHA_ALCOR
-	default y if ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA
-
-config ALPHA_EV56
-	prompt "EV56 CPU (speed >= 333MHz)?"
-	depends on ALPHA_NORITAKE || ALPHA_PRIMO
-
-config ALPHA_EV56
-	prompt "EV56 CPU (speed >= 400MHz)?"
-	depends on ALPHA_RAWHIDE
-
-config ALPHA_PRIMO
-	bool "EV5 CPU daughtercard (model 5/xxx)?"
-	depends on ALPHA_NORITAKE || ALPHA_MIKASA
-	help
-	  Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
-
-config ALPHA_GAMMA
-	bool "EV5 CPU(s) (model 5/xxx)?"
-	depends on ALPHA_SABLE
-	help
-	  Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
-
-config ALPHA_GAMMA
 	bool
-	depends on ALPHA_LYNX
-	default y
+	default y if ALPHA_ALCOR || ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_RAWHIDE || ALPHA_SABLE
 
 config ALPHA_T2
 	bool
-	depends on ALPHA_SABLE || ALPHA_LYNX
+	depends on ALPHA_SABLE
 	default y
 
 config ALPHA_PYXIS
@@ -446,15 +296,6 @@ config GENERIC_HWEIGHT
 	bool
 	default y if !ALPHA_EV67
 
-config ALPHA_AVANTI
-	bool
-	depends on ALPHA_XL || ALPHA_AVANTI_CH
-	default y
-	help
-	  Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
-	  Alphas. Info at
-	  <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
-
 config ALPHA_BROKEN_IRQ_MASK
 	bool
 	depends on ALPHA_GENERIC || ALPHA_PC164
@@ -484,9 +325,9 @@ config ALPHA_QEMU
 
 
 config ALPHA_SRM
-	bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
+	bool "Use SRM as bootloader" if ALPHA_PC164 || ALPHA_TAKARA || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS
 	depends on TTY
-	default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
+	default y if ALPHA_MIKASA || ALPHA_SABLE || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
 	help
 	  There are two different types of booting firmware on Alphas: SRM,
 	  which is command line driven, and ARC, which uses menus and arrow
@@ -512,7 +353,7 @@ config ARCH_MAY_HAVE_PC_FDC
 
 config SMP
 	bool "Symmetric multi-processing support"
-	depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
+	depends on ALPHA_SABLE || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
@@ -548,7 +389,7 @@ config ARCH_SPARSEMEM_ENABLE
 config ALPHA_WTINT
 	bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
 	default y if ALPHA_QEMU
-	default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
+	default n if ALPHA_EV56
 	default n if !ALPHA_SRM && !ALPHA_GENERIC
 	default y if SMP
 	help
diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile
index 881cb913e23a..35445ff2e489 100644
--- a/arch/alpha/Makefile
+++ b/arch/alpha/Makefile
@@ -15,18 +15,14 @@ CHECKFLAGS	+= -D__alpha__
 cflags-y	:= -pipe -mno-fp-regs -ffixed-8
 cflags-y	+= $(call cc-option, -fno-jump-tables)
 
-cpuflags-$(CONFIG_ALPHA_EV4)		:= -mcpu=ev4
-cpuflags-$(CONFIG_ALPHA_EV5)		:= -mcpu=ev5
 cpuflags-$(CONFIG_ALPHA_EV56)		:= -mcpu=ev56
 cpuflags-$(CONFIG_ALPHA_POLARIS)	:= -mcpu=pca56
 cpuflags-$(CONFIG_ALPHA_SX164)		:= -mcpu=pca56
 cpuflags-$(CONFIG_ALPHA_EV6)		:= -mcpu=ev6
 cpuflags-$(CONFIG_ALPHA_EV67)		:= -mcpu=ev67
 # If GENERIC, make sure to turn off any instruction set extensions that
-# the host compiler might have on by default.  Given that EV4 and EV5
-# have the same instruction set, prefer EV5 because an EV5 schedule is
-# more likely to keep an EV4 processor busy than vice-versa.
-cpuflags-$(CONFIG_ALPHA_GENERIC)	:= -mcpu=ev5
+# the host compiler might have on by default.
+cpuflags-$(CONFIG_ALPHA_GENERIC)	:= -mcpu=ev56 -mtune=ev6
 
 cflags-y				+= $(cpuflags-y)
 
@@ -36,8 +32,6 @@ cflags-y				+= $(cpuflags-y)
 # BWX is most important, but we don't really want any emulation ever.
 KBUILD_CFLAGS += $(cflags-y) -Wa,-mev6
 
-head-y := arch/alpha/kernel/head.o
-
 libs-y				+= arch/alpha/lib/
 
 # export what is needed by arch/alpha/boot/Makefile
diff --git a/arch/alpha/boot/bootp.c b/arch/alpha/boot/bootp.c
index b4faba2432d5..842e85776cc0 100644
--- a/arch/alpha/boot/bootp.c
+++ b/arch/alpha/boot/bootp.c
@@ -18,7 +18,7 @@
 #include <asm/hwrpb.h>
 #include <asm/io.h>
 
-#include <stdarg.h>
+#include <linux/stdarg.h>
 
 #include "ksize.h"
 
diff --git a/arch/alpha/boot/bootpz.c b/arch/alpha/boot/bootpz.c
index 90a2b341e9c0..c6079308eab3 100644
--- a/arch/alpha/boot/bootpz.c
+++ b/arch/alpha/boot/bootpz.c
@@ -20,7 +20,7 @@
 #include <asm/hwrpb.h>
 #include <asm/io.h>
 
-#include <stdarg.h>
+#include <linux/stdarg.h>
 
 #include "kzsize.h"
 
diff --git a/arch/alpha/boot/main.c b/arch/alpha/boot/main.c
index e5347a080008..22a1cb0264af 100644
--- a/arch/alpha/boot/main.c
+++ b/arch/alpha/boot/main.c
@@ -15,7 +15,7 @@
 #include <asm/console.h>
 #include <asm/hwrpb.h>
 
-#include <stdarg.h>
+#include <linux/stdarg.h>
 
 #include "ksize.h"
 
diff --git a/arch/alpha/boot/misc.c b/arch/alpha/boot/misc.c
index 325d4dd4f904..1ab91852d9f7 100644
--- a/arch/alpha/boot/misc.c
+++ b/arch/alpha/boot/misc.c
@@ -89,8 +89,6 @@ static ulg output_ptr;
 static ulg bytes_out;
 
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern int end;
 static ulg free_mem_ptr;
diff --git a/arch/alpha/boot/stdio.c b/arch/alpha/boot/stdio.c
index 60f73ccd2e89..faa5234b90b8 100644
--- a/arch/alpha/boot/stdio.c
+++ b/arch/alpha/boot/stdio.c
@@ -2,8 +2,8 @@
 /*
  * Copyright (C) Paul Mackerras 1997.
  */
-#include <stdarg.h>
-#include <stddef.h>
+#include <linux/string.h>
+#include <linux/stdarg.h>
 
 size_t strnlen(const char * s, size_t count)
 {
@@ -42,8 +42,8 @@ static int skip_atoi(const char **s)
 
 static char * number(char * str, unsigned long long num, int base, int size, int precision, int type)
 {
-	char c,sign,tmp[66];
-	const char *digits="0123456789abcdefghijklmnopqrstuvwxyz";
+	char c, sign, tmp[66];
+	const char *digits = "0123456789abcdefghijklmnopqrstuvwxyz";
 	int i;
 
 	if (type & LARGE)
@@ -83,14 +83,14 @@ static char * number(char * str, unsigned long long num, int base, int size, int
 		precision = i;
 	size -= precision;
 	if (!(type&(ZEROPAD+LEFT)))
-		while(size-->0)
+		while (size-- > 0)
 			*str++ = ' ';
 	if (sign)
 		*str++ = sign;
 	if (type & SPECIAL) {
 		if (base==8)
 			*str++ = '0';
-		else if (base==16) {
+		else if (base == 16) {
 			*str++ = '0';
 			*str++ = digits[33];
 		}
@@ -125,7 +125,7 @@ int vsprintf(char *buf, const char *fmt, va_list args)
 				/* 'z' changed to 'Z' --davidm 1/25/99 */
 
 
-	for (str=buf ; *fmt ; ++fmt) {
+	for (str = buf ; *fmt ; ++fmt) {
 		if (*fmt != '%') {
 			*str++ = *fmt;
 			continue;
@@ -296,7 +296,7 @@ int sprintf(char * buf, const char *fmt, ...)
 	int i;
 
 	va_start(args, fmt);
-	i=vsprintf(buf,fmt,args);
+	i = vsprintf(buf, fmt, args);
 	va_end(args);
 	return i;
 }
diff --git a/arch/alpha/boot/tools/objstrip.c b/arch/alpha/boot/tools/objstrip.c
index 08b430d25a31..7cf92d172dce 100644
--- a/arch/alpha/boot/tools/objstrip.c
+++ b/arch/alpha/boot/tools/objstrip.c
@@ -148,7 +148,7 @@ main (int argc, char *argv[])
 #ifdef __ELF__
     elf = (struct elfhdr *) buf;
 
-    if (elf->e_ident[0] == 0x7f && str_has_prefix((char *)elf->e_ident + 1, "ELF")) {
+    if (memcmp(&elf->e_ident[EI_MAG0], ELFMAG, SELFMAG) == 0) {
 	if (elf->e_type != ET_EXEC) {
 	    fprintf(stderr, "%s: %s is not an ELF executable\n",
 		    prog_name, inname);
diff --git a/arch/alpha/configs/defconfig b/arch/alpha/configs/defconfig
index 7e9336930880..3280bd9e6578 100644
--- a/arch/alpha/configs/defconfig
+++ b/arch/alpha/configs/defconfig
@@ -39,21 +39,18 @@ CONFIG_PATA_CYPRESS=y
 CONFIG_ATA_GENERIC=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-CONFIG_NET_ETHERNET=y
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
 CONFIG_NET_TULIP=y
 CONFIG_DE2104X=m
 CONFIG_TULIP=y
 CONFIG_TULIP_MMIO=y
-CONFIG_NET_PCI=y
 CONFIG_YELLOWFIN=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_CMOS=y
 CONFIG_EXT2_FS=y
-CONFIG_REISERFS_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
@@ -65,7 +62,7 @@ CONFIG_NFSD=m
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_ALPHA_LEGACY_START_ADDRESS=y
 CONFIG_MATHEMU=y
 CONFIG_CRYPTO_HMAC=y
diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild
index 42911c8340c7..483965c5a4de 100644
--- a/arch/alpha/include/asm/Kbuild
+++ b/arch/alpha/include/asm/Kbuild
@@ -1,6 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 
 generated-y += syscall_table.h
-generic-y += export.h
+generic-y += agp.h
+generic-y += asm-offsets.h
 generic-y += kvm_para.h
 generic-y += mcs_spinlock.h
+generic-y += text-patching.h
diff --git a/arch/alpha/include/asm/a.out.h b/arch/alpha/include/asm/a.out.h
deleted file mode 100644
index d2346b7caff1..000000000000
--- a/arch/alpha/include/asm/a.out.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_A_OUT_H__
-#define __ALPHA_A_OUT_H__
-
-#include <uapi/asm/a.out.h>
-
-
-/* Assume that start addresses below 4G belong to a TASO application.
-   Unfortunately, there is no proper bit in the exec header to check.
-   Worse, we have to notice the start address before swapping to use
-   /sbin/loader, which of course is _not_ a TASO application.  */
-#define SET_AOUT_PERSONALITY(BFPM, EX) \
-	set_personality (((BFPM->taso || EX.ah.entry < 0x100000000L \
-			   ? ADDR_LIMIT_32BIT : 0) | PER_OSF4))
-
-#endif /* __A_OUT_GNU_H__ */
diff --git a/arch/alpha/include/asm/agp.h b/arch/alpha/include/asm/agp.h
deleted file mode 100644
index 7874f063d000..000000000000
--- a/arch/alpha/include/asm/agp.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef AGP_H
-#define AGP_H 1
-
-#include <asm/io.h>
-
-/* dummy for now */
-
-#define map_page_into_agp(page)		do { } while (0)
-#define unmap_page_from_agp(page)	do { } while (0)
-#define flush_agp_cache() mb()
-
-/* GATT allocation. Returns/accepts GATT kernel virtual address. */
-#define alloc_gatt_pages(order)		\
-	((char *)__get_free_pages(GFP_KERNEL, (order)))
-#define free_gatt_pages(table, order)	\
-	free_pages((unsigned long)(table), (order))
-
-#endif
diff --git a/arch/alpha/include/asm/asm-offsets.h b/arch/alpha/include/asm/asm-offsets.h
deleted file mode 100644
index d370ee36a182..000000000000
--- a/arch/alpha/include/asm/asm-offsets.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <generated/asm-offsets.h>
diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h
index f2861a43a61e..cbd9244571af 100644
--- a/arch/alpha/include/asm/atomic.h
+++ b/arch/alpha/include/asm/atomic.h
@@ -200,25 +200,6 @@ ATOMIC_OPS(xor, xor)
 #undef ATOMIC_OP_RETURN
 #undef ATOMIC_OP
 
-#define arch_atomic64_cmpxchg(v, old, new) \
-	(arch_cmpxchg(&((v)->counter), old, new))
-#define arch_atomic64_xchg(v, new) \
-	(arch_xchg(&((v)->counter), new))
-
-#define arch_atomic_cmpxchg(v, old, new) \
-	(arch_cmpxchg(&((v)->counter), old, new))
-#define arch_atomic_xchg(v, new) \
-	(arch_xchg(&((v)->counter), new))
-
-/**
- * arch_atomic_fetch_add_unless - add unless the number is a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns the old value of @v.
- */
 static __inline__ int arch_atomic_fetch_add_unless(atomic_t *v, int a, int u)
 {
 	int c, new, old;
@@ -242,15 +223,6 @@ static __inline__ int arch_atomic_fetch_add_unless(atomic_t *v, int a, int u)
 }
 #define arch_atomic_fetch_add_unless arch_atomic_fetch_add_unless
 
-/**
- * arch_atomic64_fetch_add_unless - add unless the number is a given value
- * @v: pointer of type atomic64_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns the old value of @v.
- */
 static __inline__ s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
 {
 	s64 c, new, old;
@@ -274,13 +246,6 @@ static __inline__ s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u
 }
 #define arch_atomic64_fetch_add_unless arch_atomic64_fetch_add_unless
 
-/*
- * arch_atomic64_dec_if_positive - decrement by 1 if old value positive
- * @v: pointer of type atomic_t
- *
- * The function returns the old value of *v minus 1, even if
- * the atomic variable, v, was not decremented.
- */
 static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
 {
 	s64 old, tmp;
diff --git a/arch/alpha/include/asm/bitops.h b/arch/alpha/include/asm/bitops.h
index 492c7713ddae..76e4343c090f 100644
--- a/arch/alpha/include/asm/bitops.h
+++ b/arch/alpha/include/asm/bitops.h
@@ -283,10 +283,27 @@ arch___test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
 	return (old & mask) != 0;
 }
 
-static __always_inline bool
-arch_test_bit(unsigned long nr, const volatile unsigned long *addr)
+#define arch_test_bit generic_test_bit
+#define arch_test_bit_acquire generic_test_bit_acquire
+
+static inline bool xor_unlock_is_negative_byte(unsigned long mask,
+		volatile unsigned long *p)
 {
-	return (1UL & (((const int *) addr)[nr >> 5] >> (nr & 31))) != 0UL;
+	unsigned long temp, old;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%4\n"
+	"	mov %0,%2\n"
+	"	xor %0,%3,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (*p), "=&r" (old)
+	:"Ir" (mask), "m" (*p));
+
+	return (old & BIT(7)) != 0;
 }
 
 /*
@@ -311,7 +328,7 @@ static inline unsigned long ffz_b(unsigned long x)
 	return sum;
 }
 
-static inline unsigned long ffz(unsigned long word)
+static inline unsigned long __attribute_const__ ffz(unsigned long word)
 {
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
 	/* Whee.  EV67 can calculate it directly.  */
@@ -331,7 +348,7 @@ static inline unsigned long ffz(unsigned long word)
 /*
  * __ffs = Find First set bit in word.  Undefined if no set bit exists.
  */
-static inline unsigned long __ffs(unsigned long word)
+static inline __attribute_const__ unsigned long __ffs(unsigned long word)
 {
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
 	/* Whee.  EV67 can calculate it directly.  */
@@ -356,7 +373,7 @@ static inline unsigned long __ffs(unsigned long word)
  * differs in spirit from the above __ffs.
  */
 
-static inline int ffs(int word)
+static inline __attribute_const__ int ffs(int word)
 {
 	int result = __ffs(word) + 1;
 	return word ? result : 0;
@@ -366,14 +383,14 @@ static inline int ffs(int word)
  * fls: find last bit set.
  */
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
-static inline int fls64(unsigned long word)
+static inline __attribute_const__ int fls64(unsigned long word)
 {
 	return 64 - __kernel_ctlz(word);
 }
 #else
 extern const unsigned char __flsm1_tab[256];
 
-static inline int fls64(unsigned long x)
+static inline __attribute_const__ int fls64(unsigned long x)
 {
 	unsigned long t, a, r;
 
@@ -386,12 +403,12 @@ static inline int fls64(unsigned long x)
 }
 #endif
 
-static inline unsigned long __fls(unsigned long x)
+static inline __attribute_const__ unsigned long __fls(unsigned long x)
 {
 	return fls64(x) - 1;
 }
 
-static inline int fls(unsigned int x)
+static inline __attribute_const__ int fls(unsigned int x)
 {
 	return fls64(x);
 }
diff --git a/arch/alpha/include/asm/bugs.h b/arch/alpha/include/asm/bugs.h
deleted file mode 100644
index 78030d1c7e7e..000000000000
--- a/arch/alpha/include/asm/bugs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  include/asm-alpha/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-/*
- * I don't know of any alpha bugs yet.. Nice chip
- */
-
-static void check_bugs(void)
-{
-}
diff --git a/arch/alpha/include/asm/cacheflush.h b/arch/alpha/include/asm/cacheflush.h
index 9945ff483eaf..36a7e924c3b9 100644
--- a/arch/alpha/include/asm/cacheflush.h
+++ b/arch/alpha/include/asm/cacheflush.h
@@ -53,9 +53,16 @@ extern void flush_icache_user_page(struct vm_area_struct *vma,
 #define flush_icache_user_page flush_icache_user_page
 #endif /* CONFIG_SMP */
 
-/* This is used only in __do_fault and do_swap_page.  */
-#define flush_icache_page(vma, page) \
-	flush_icache_user_page((vma), (page), 0, 0)
+/*
+ * Both implementations of flush_icache_user_page flush the entire
+ * address space, so one call, no matter how many pages.
+ */
+static inline void flush_icache_pages(struct vm_area_struct *vma,
+		struct page *page, unsigned int nr)
+{
+	flush_icache_user_page(vma, page, 0, 0);
+}
+#define flush_icache_pages flush_icache_pages
 
 #include <asm-generic/cacheflush.h>
 
diff --git a/arch/alpha/include/asm/cmpxchg.h b/arch/alpha/include/asm/cmpxchg.h
index 6e0a850aa9d3..ae1b96479d0c 100644
--- a/arch/alpha/include/asm/cmpxchg.h
+++ b/arch/alpha/include/asm/cmpxchg.h
@@ -3,25 +3,240 @@
 #define _ALPHA_CMPXCHG_H
 
 /*
- * Atomic exchange routines.
+ * Atomic exchange.
+ * Since it can be used to implement critical sections
+ * it must clobber "memory" (also for interrupts in UP).
  */
 
-#define ____xchg(type, args...)		__xchg ## type ## _local(args)
-#define ____cmpxchg(type, args...)	__cmpxchg ## type ## _local(args)
-#include <asm/xchg.h>
+static inline unsigned long
+____xchg_u8(volatile char *m, unsigned long val)
+{
+	unsigned long ret, tmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%4,7,%3\n"
+	"	insbl	%1,%4,%1\n"
+	"1:	ldq_l	%2,0(%3)\n"
+	"	extbl	%2,%4,%0\n"
+	"	mskbl	%2,%4,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%3)\n"
+	"	beq	%2,2f\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
+	: "r" ((long)m), "1" (val) : "memory");
+
+	return ret;
+}
+
+static inline unsigned long
+____xchg_u16(volatile short *m, unsigned long val)
+{
+	unsigned long ret, tmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%4,7,%3\n"
+	"	inswl	%1,%4,%1\n"
+	"1:	ldq_l	%2,0(%3)\n"
+	"	extwl	%2,%4,%0\n"
+	"	mskwl	%2,%4,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%3)\n"
+	"	beq	%2,2f\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
+	: "r" ((long)m), "1" (val) : "memory");
+
+	return ret;
+}
+
+static inline unsigned long
+____xchg_u32(volatile int *m, unsigned long val)
+{
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%4\n"
+	"	bis $31,%3,%1\n"
+	"	stl_c %1,%2\n"
+	"	beq %1,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	: "=&r" (val), "=&r" (dummy), "=m" (*m)
+	: "rI" (val), "m" (*m) : "memory");
+
+	return val;
+}
+
+static inline unsigned long
+____xchg_u64(volatile long *m, unsigned long val)
+{
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%4\n"
+	"	bis $31,%3,%1\n"
+	"	stq_c %1,%2\n"
+	"	beq %1,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	: "=&r" (val), "=&r" (dummy), "=m" (*m)
+	: "rI" (val), "m" (*m) : "memory");
+
+	return val;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid xchg().  */
+extern void __xchg_called_with_bad_pointer(void);
+
+static __always_inline unsigned long
+____xchg(volatile void *ptr, unsigned long x, int size)
+{
+	return
+		size == 1 ? ____xchg_u8(ptr, x) :
+		size == 2 ? ____xchg_u16(ptr, x) :
+		size == 4 ? ____xchg_u32(ptr, x) :
+		size == 8 ? ____xchg_u64(ptr, x) :
+			(__xchg_called_with_bad_pointer(), x);
+}
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+static inline unsigned long
+____cmpxchg_u8(volatile char *m, unsigned char old, unsigned char new)
+{
+	unsigned long prev, tmp, cmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%5,7,%4\n"
+	"	insbl	%1,%5,%1\n"
+	"1:	ldq_l	%2,0(%4)\n"
+	"	extbl	%2,%5,%0\n"
+	"	cmpeq	%0,%6,%3\n"
+	"	beq	%3,2f\n"
+	"	mskbl	%2,%5,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%4)\n"
+	"	beq	%2,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
+	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+____cmpxchg_u16(volatile short *m, unsigned short old, unsigned short new)
+{
+	unsigned long prev, tmp, cmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%5,7,%4\n"
+	"	inswl	%1,%5,%1\n"
+	"1:	ldq_l	%2,0(%4)\n"
+	"	extwl	%2,%5,%0\n"
+	"	cmpeq	%0,%6,%3\n"
+	"	beq	%3,2f\n"
+	"	mskwl	%2,%5,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%4)\n"
+	"	beq	%2,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
+	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+____cmpxchg_u32(volatile int *m, int old, int new)
+{
+	unsigned long prev, cmp;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%5\n"
+	"	cmpeq %0,%3,%1\n"
+	"	beq %1,2f\n"
+	"	mov %4,%1\n"
+	"	stl_c %1,%2\n"
+	"	beq %1,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
+	: "r"((long) old), "r"(new), "m"(*m) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+____cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
+{
+	unsigned long prev, cmp;
+
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%5\n"
+	"	cmpeq %0,%3,%1\n"
+	"	beq %1,2f\n"
+	"	mov %4,%1\n"
+	"	stq_c %1,%2\n"
+	"	beq %1,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
+	: "r"((long) old), "r"(new), "m"(*m) : "memory");
+
+	return prev;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static __always_inline unsigned long
+____cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
+	      int size)
+{
+	return
+		size == 1 ? ____cmpxchg_u8(ptr, old, new) :
+		size == 2 ? ____cmpxchg_u16(ptr, old, new) :
+		size == 4 ? ____cmpxchg_u32(ptr, old, new) :
+		size == 8 ? ____cmpxchg_u64(ptr, old, new) :
+			(__cmpxchg_called_with_bad_pointer(), old);
+}
 
 #define xchg_local(ptr, x)						\
 ({									\
 	__typeof__(*(ptr)) _x_ = (x);					\
-	(__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_,	\
-				       sizeof(*(ptr)));			\
+	(__typeof__(*(ptr))) ____xchg((ptr), (unsigned long)_x_,	\
+					       sizeof(*(ptr)));		\
 })
 
 #define arch_cmpxchg_local(ptr, o, n)					\
 ({									\
 	__typeof__(*(ptr)) _o_ = (o);					\
 	__typeof__(*(ptr)) _n_ = (n);					\
-	(__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	\
+	(__typeof__(*(ptr))) ____cmpxchg((ptr), (unsigned long)_o_,	\
 					  (unsigned long)_n_,		\
 					  sizeof(*(ptr)));		\
 })
@@ -32,12 +247,6 @@
 	cmpxchg_local((ptr), (o), (n));					\
 })
 
-#undef ____xchg
-#undef ____cmpxchg
-#define ____xchg(type, args...)		__xchg ##type(args)
-#define ____cmpxchg(type, args...)	__cmpxchg ##type(args)
-#include <asm/xchg.h>
-
 /*
  * The leading and the trailing memory barriers guarantee that these
  * operations are fully ordered.
@@ -48,7 +257,7 @@
 	__typeof__(*(ptr)) _x_ = (x);					\
 	smp_mb();							\
 	__ret = (__typeof__(*(ptr)))					\
-		__xchg((ptr), (unsigned long)_x_, sizeof(*(ptr)));	\
+		____xchg((ptr), (unsigned long)_x_, sizeof(*(ptr)));	\
 	smp_mb();							\
 	__ret;								\
 })
@@ -59,7 +268,7 @@
 	__typeof__(*(ptr)) _o_ = (o);					\
 	__typeof__(*(ptr)) _n_ = (n);					\
 	smp_mb();							\
-	__ret = (__typeof__(*(ptr))) __cmpxchg((ptr),			\
+	__ret = (__typeof__(*(ptr))) ____cmpxchg((ptr),			\
 		(unsigned long)_o_, (unsigned long)_n_, sizeof(*(ptr)));\
 	smp_mb();							\
 	__ret;								\
@@ -71,6 +280,4 @@
 	arch_cmpxchg((ptr), (o), (n));					\
 })
 
-#undef ____cmpxchg
-
 #endif /* _ALPHA_CMPXCHG_H */
diff --git a/arch/alpha/include/asm/core_apecs.h b/arch/alpha/include/asm/core_apecs.h
deleted file mode 100644
index 2d9726fc02ef..000000000000
--- a/arch/alpha/include/asm/core_apecs.h
+++ /dev/null
@@ -1,518 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_APECS__H__
-#define __ALPHA_APECS__H__
-
-#include <linux/types.h>
-#include <asm/compiler.h>
-
-/*
- * APECS is the internal name for the 2107x chipset which provides
- * memory controller and PCI access for the 21064 chip based systems.
- *
- * This file is based on:
- *
- * DECchip 21071-AA and DECchip 21072-AA Core Logic Chipsets
- * Data Sheet
- *
- * EC-N0648-72
- *
- *
- * david.rusling@reo.mts.dec.com Initial Version.
- *
- */
-
-/*
-   An AVANTI *might* be an XL, and an XL has only 27 bits of ISA address
-   that get passed through the PCI<->ISA bridge chip. So we've gotta use
-   both windows to max out the physical memory we can DMA to. Sigh...
-
-   If we try a window at 0 for 1GB as a work-around, we run into conflicts
-   with ISA/PCI bus memory which can't be relocated, like VGA aperture and
-   BIOS ROMs. So we must put the windows high enough to avoid these areas.
-
-   We put window 1 at BUS 64Mb for 64Mb, mapping physical 0 to 64Mb-1,
-   and window 2 at BUS 1Gb for 1Gb, mapping physical 0 to 1Gb-1.
-   Yes, this does map 0 to 64Mb-1 twice, but only window 1 will actually
-   be used for that range (via virt_to_bus()).
-
-   Note that we actually fudge the window 1 maximum as 48Mb instead of 64Mb,
-   to keep virt_to_bus() from returning an address in the first window, for
-   a data area that goes beyond the 64Mb first DMA window.  Sigh...
-   The fudge factor MUST match with <asm/dma.h> MAX_DMA_ADDRESS, but
-   we can't just use that here, because of header file looping... :-(
-
-   Window 1 will be used for all DMA from the ISA bus; yes, that does
-   limit what memory an ISA floppy or sound card or Ethernet can touch, but
-   it's also a known limitation on other platforms as well. We use the
-   same technique that is used on INTEL platforms with similar limitation:
-   set MAX_DMA_ADDRESS and clear some pages' DMAable flags during mem_init().
-   We trust that any ISA bus device drivers will *always* ask for DMAable
-   memory explicitly via kmalloc()/get_free_pages() flags arguments.
-
-   Note that most PCI bus devices' drivers do *not* explicitly ask for
-   DMAable memory; they count on being able to DMA to any memory they
-   get from kmalloc()/get_free_pages(). They will also use window 1 for
-   any physical memory accesses below 64Mb; the rest will be handled by
-   window 2, maxing out at 1Gb of memory. I trust this is enough... :-)
-
-   We hope that the area before the first window is large enough so that
-   there will be no overlap at the top end (64Mb). We *must* locate the
-   PCI cards' memory just below window 1, so that there's still the
-   possibility of being able to access it via SPARSE space. This is
-   important for cards such as the Matrox Millennium, whose Xserver
-   wants to access memory-mapped registers in byte and short lengths.
-
-   Note that the XL is treated differently from the AVANTI, even though
-   for most other things they are identical. It didn't seem reasonable to
-   make the AVANTI support pay for the limitations of the XL. It is true,
-   however, that an XL kernel will run on an AVANTI without problems.
-
-   %%% All of this should be obviated by the ability to route
-   everything through the iommu.
-*/
-
-/*
- * 21071-DA Control and Status registers.
- * These are used for PCI memory access.
- */
-#define APECS_IOC_DCSR                  (IDENT_ADDR + 0x1A0000000UL)
-#define APECS_IOC_PEAR                  (IDENT_ADDR + 0x1A0000020UL)
-#define APECS_IOC_SEAR                  (IDENT_ADDR + 0x1A0000040UL)
-#define APECS_IOC_DR1                   (IDENT_ADDR + 0x1A0000060UL)
-#define APECS_IOC_DR2                   (IDENT_ADDR + 0x1A0000080UL)
-#define APECS_IOC_DR3                   (IDENT_ADDR + 0x1A00000A0UL)
-
-#define APECS_IOC_TB1R                  (IDENT_ADDR + 0x1A00000C0UL)
-#define APECS_IOC_TB2R                  (IDENT_ADDR + 0x1A00000E0UL)
-
-#define APECS_IOC_PB1R                  (IDENT_ADDR + 0x1A0000100UL)
-#define APECS_IOC_PB2R                  (IDENT_ADDR + 0x1A0000120UL)
-
-#define APECS_IOC_PM1R                  (IDENT_ADDR + 0x1A0000140UL)
-#define APECS_IOC_PM2R                  (IDENT_ADDR + 0x1A0000160UL)
-
-#define APECS_IOC_HAXR0                 (IDENT_ADDR + 0x1A0000180UL)
-#define APECS_IOC_HAXR1                 (IDENT_ADDR + 0x1A00001A0UL)
-#define APECS_IOC_HAXR2                 (IDENT_ADDR + 0x1A00001C0UL)
-
-#define APECS_IOC_PMLT                  (IDENT_ADDR + 0x1A00001E0UL)
-
-#define APECS_IOC_TLBTAG0               (IDENT_ADDR + 0x1A0000200UL)
-#define APECS_IOC_TLBTAG1               (IDENT_ADDR + 0x1A0000220UL)
-#define APECS_IOC_TLBTAG2               (IDENT_ADDR + 0x1A0000240UL)
-#define APECS_IOC_TLBTAG3               (IDENT_ADDR + 0x1A0000260UL)
-#define APECS_IOC_TLBTAG4               (IDENT_ADDR + 0x1A0000280UL)
-#define APECS_IOC_TLBTAG5               (IDENT_ADDR + 0x1A00002A0UL)
-#define APECS_IOC_TLBTAG6               (IDENT_ADDR + 0x1A00002C0UL)
-#define APECS_IOC_TLBTAG7               (IDENT_ADDR + 0x1A00002E0UL)
-
-#define APECS_IOC_TLBDATA0              (IDENT_ADDR + 0x1A0000300UL)
-#define APECS_IOC_TLBDATA1              (IDENT_ADDR + 0x1A0000320UL)
-#define APECS_IOC_TLBDATA2              (IDENT_ADDR + 0x1A0000340UL)
-#define APECS_IOC_TLBDATA3              (IDENT_ADDR + 0x1A0000360UL)
-#define APECS_IOC_TLBDATA4              (IDENT_ADDR + 0x1A0000380UL)
-#define APECS_IOC_TLBDATA5              (IDENT_ADDR + 0x1A00003A0UL)
-#define APECS_IOC_TLBDATA6              (IDENT_ADDR + 0x1A00003C0UL)
-#define APECS_IOC_TLBDATA7              (IDENT_ADDR + 0x1A00003E0UL)
-
-#define APECS_IOC_TBIA                  (IDENT_ADDR + 0x1A0000400UL)
-
-
-/*
- * 21071-CA Control and Status registers.
- * These are used to program memory timing,
- *  configure memory and initialise the B-Cache.
- */
-#define APECS_MEM_GCR		        (IDENT_ADDR + 0x180000000UL)
-#define APECS_MEM_EDSR		        (IDENT_ADDR + 0x180000040UL)
-#define APECS_MEM_TAR  		        (IDENT_ADDR + 0x180000060UL)
-#define APECS_MEM_ELAR		        (IDENT_ADDR + 0x180000080UL)
-#define APECS_MEM_EHAR  		(IDENT_ADDR + 0x1800000a0UL)
-#define APECS_MEM_SFT_RST		(IDENT_ADDR + 0x1800000c0UL)
-#define APECS_MEM_LDxLAR 		(IDENT_ADDR + 0x1800000e0UL)
-#define APECS_MEM_LDxHAR 		(IDENT_ADDR + 0x180000100UL)
-#define APECS_MEM_GTR    		(IDENT_ADDR + 0x180000200UL)
-#define APECS_MEM_RTR    		(IDENT_ADDR + 0x180000220UL)
-#define APECS_MEM_VFPR   		(IDENT_ADDR + 0x180000240UL)
-#define APECS_MEM_PDLDR  		(IDENT_ADDR + 0x180000260UL)
-#define APECS_MEM_PDhDR  		(IDENT_ADDR + 0x180000280UL)
-
-/* Bank x Base Address Register */
-#define APECS_MEM_B0BAR  		(IDENT_ADDR + 0x180000800UL)
-#define APECS_MEM_B1BAR  		(IDENT_ADDR + 0x180000820UL)
-#define APECS_MEM_B2BAR  		(IDENT_ADDR + 0x180000840UL)
-#define APECS_MEM_B3BAR  		(IDENT_ADDR + 0x180000860UL)
-#define APECS_MEM_B4BAR  		(IDENT_ADDR + 0x180000880UL)
-#define APECS_MEM_B5BAR  		(IDENT_ADDR + 0x1800008A0UL)
-#define APECS_MEM_B6BAR  		(IDENT_ADDR + 0x1800008C0UL)
-#define APECS_MEM_B7BAR  		(IDENT_ADDR + 0x1800008E0UL)
-#define APECS_MEM_B8BAR  		(IDENT_ADDR + 0x180000900UL)
-
-/* Bank x Configuration Register */
-#define APECS_MEM_B0BCR  		(IDENT_ADDR + 0x180000A00UL)
-#define APECS_MEM_B1BCR  		(IDENT_ADDR + 0x180000A20UL)
-#define APECS_MEM_B2BCR  		(IDENT_ADDR + 0x180000A40UL)
-#define APECS_MEM_B3BCR  		(IDENT_ADDR + 0x180000A60UL)
-#define APECS_MEM_B4BCR  		(IDENT_ADDR + 0x180000A80UL)
-#define APECS_MEM_B5BCR  		(IDENT_ADDR + 0x180000AA0UL)
-#define APECS_MEM_B6BCR  		(IDENT_ADDR + 0x180000AC0UL)
-#define APECS_MEM_B7BCR  		(IDENT_ADDR + 0x180000AE0UL)
-#define APECS_MEM_B8BCR  		(IDENT_ADDR + 0x180000B00UL)
-
-/* Bank x Timing Register A */
-#define APECS_MEM_B0TRA  		(IDENT_ADDR + 0x180000C00UL)
-#define APECS_MEM_B1TRA  		(IDENT_ADDR + 0x180000C20UL)
-#define APECS_MEM_B2TRA  		(IDENT_ADDR + 0x180000C40UL)
-#define APECS_MEM_B3TRA  		(IDENT_ADDR + 0x180000C60UL)
-#define APECS_MEM_B4TRA  		(IDENT_ADDR + 0x180000C80UL)
-#define APECS_MEM_B5TRA  		(IDENT_ADDR + 0x180000CA0UL)
-#define APECS_MEM_B6TRA  		(IDENT_ADDR + 0x180000CC0UL)
-#define APECS_MEM_B7TRA  		(IDENT_ADDR + 0x180000CE0UL)
-#define APECS_MEM_B8TRA  		(IDENT_ADDR + 0x180000D00UL)
-
-/* Bank x Timing Register B */
-#define APECS_MEM_B0TRB                 (IDENT_ADDR + 0x180000E00UL)
-#define APECS_MEM_B1TRB  		(IDENT_ADDR + 0x180000E20UL)
-#define APECS_MEM_B2TRB  		(IDENT_ADDR + 0x180000E40UL)
-#define APECS_MEM_B3TRB  		(IDENT_ADDR + 0x180000E60UL)
-#define APECS_MEM_B4TRB  		(IDENT_ADDR + 0x180000E80UL)
-#define APECS_MEM_B5TRB  		(IDENT_ADDR + 0x180000EA0UL)
-#define APECS_MEM_B6TRB  		(IDENT_ADDR + 0x180000EC0UL)
-#define APECS_MEM_B7TRB  		(IDENT_ADDR + 0x180000EE0UL)
-#define APECS_MEM_B8TRB  		(IDENT_ADDR + 0x180000F00UL)
-
-
-/*
- * Memory spaces:
- */
-#define APECS_IACK_SC		        (IDENT_ADDR + 0x1b0000000UL)
-#define APECS_CONF		        (IDENT_ADDR + 0x1e0000000UL)
-#define APECS_IO			(IDENT_ADDR + 0x1c0000000UL)
-#define APECS_SPARSE_MEM		(IDENT_ADDR + 0x200000000UL)
-#define APECS_DENSE_MEM		        (IDENT_ADDR + 0x300000000UL)
-
-
-/*
- * Bit definitions for I/O Controller status register 0:
- */
-#define APECS_IOC_STAT0_CMD		0xf
-#define APECS_IOC_STAT0_ERR		(1<<4)
-#define APECS_IOC_STAT0_LOST		(1<<5)
-#define APECS_IOC_STAT0_THIT		(1<<6)
-#define APECS_IOC_STAT0_TREF		(1<<7)
-#define APECS_IOC_STAT0_CODE_SHIFT	8
-#define APECS_IOC_STAT0_CODE_MASK	0x7
-#define APECS_IOC_STAT0_P_NBR_SHIFT	13
-#define APECS_IOC_STAT0_P_NBR_MASK	0x7ffff
-
-#define APECS_HAE_ADDRESS		APECS_IOC_HAXR1
-
-
-/*
- * Data structure for handling APECS machine checks:
- */
-
-struct el_apecs_mikasa_sysdata_mcheck
-{
-	unsigned long coma_gcr;
-	unsigned long coma_edsr;
-	unsigned long coma_ter;
-	unsigned long coma_elar;
-	unsigned long coma_ehar;
-	unsigned long coma_ldlr;
-	unsigned long coma_ldhr;
-	unsigned long coma_base0;
-	unsigned long coma_base1;
-	unsigned long coma_base2;
-	unsigned long coma_base3;
-	unsigned long coma_cnfg0;
-	unsigned long coma_cnfg1;
-	unsigned long coma_cnfg2;
-	unsigned long coma_cnfg3;
-	unsigned long epic_dcsr;
-	unsigned long epic_pear;
-	unsigned long epic_sear;
-	unsigned long epic_tbr1;
-	unsigned long epic_tbr2;
-	unsigned long epic_pbr1;
-	unsigned long epic_pbr2;
-	unsigned long epic_pmr1;
-	unsigned long epic_pmr2;
-	unsigned long epic_harx1;
-	unsigned long epic_harx2;
-	unsigned long epic_pmlt;
-	unsigned long epic_tag0;
-	unsigned long epic_tag1;
-	unsigned long epic_tag2;
-	unsigned long epic_tag3;
-	unsigned long epic_tag4;
-	unsigned long epic_tag5;
-	unsigned long epic_tag6;
-	unsigned long epic_tag7;
-	unsigned long epic_data0;
-	unsigned long epic_data1;
-	unsigned long epic_data2;
-	unsigned long epic_data3;
-	unsigned long epic_data4;
-	unsigned long epic_data5;
-	unsigned long epic_data6;
-	unsigned long epic_data7;
-
-	unsigned long pceb_vid;
-	unsigned long pceb_did;
-	unsigned long pceb_revision;
-	unsigned long pceb_command;
-	unsigned long pceb_status;
-	unsigned long pceb_latency;
-	unsigned long pceb_control;
-	unsigned long pceb_arbcon;
-	unsigned long pceb_arbpri;
-
-	unsigned long esc_id;
-	unsigned long esc_revision;
-	unsigned long esc_int0;
-	unsigned long esc_int1;
-	unsigned long esc_elcr0;
-	unsigned long esc_elcr1;
-	unsigned long esc_last_eisa;
-	unsigned long esc_nmi_stat;
-
-	unsigned long pci_ir;
-	unsigned long pci_imr;
-	unsigned long svr_mgr;
-};
-
-/* This for the normal APECS machines.  */
-struct el_apecs_sysdata_mcheck
-{
-	unsigned long coma_gcr;
-	unsigned long coma_edsr;
-	unsigned long coma_ter;
-	unsigned long coma_elar;
-	unsigned long coma_ehar;
-	unsigned long coma_ldlr;
-	unsigned long coma_ldhr;
-	unsigned long coma_base0;
-	unsigned long coma_base1;
-	unsigned long coma_base2;
-	unsigned long coma_cnfg0;
-	unsigned long coma_cnfg1;
-	unsigned long coma_cnfg2;
-	unsigned long epic_dcsr;
-	unsigned long epic_pear;
-	unsigned long epic_sear;
-	unsigned long epic_tbr1;
-	unsigned long epic_tbr2;
-	unsigned long epic_pbr1;
-	unsigned long epic_pbr2;
-	unsigned long epic_pmr1;
-	unsigned long epic_pmr2;
-	unsigned long epic_harx1;
-	unsigned long epic_harx2;
-	unsigned long epic_pmlt;
-	unsigned long epic_tag0;
-	unsigned long epic_tag1;
-	unsigned long epic_tag2;
-	unsigned long epic_tag3;
-	unsigned long epic_tag4;
-	unsigned long epic_tag5;
-	unsigned long epic_tag6;
-	unsigned long epic_tag7;
-	unsigned long epic_data0;
-	unsigned long epic_data1;
-	unsigned long epic_data2;
-	unsigned long epic_data3;
-	unsigned long epic_data4;
-	unsigned long epic_data5;
-	unsigned long epic_data6;
-	unsigned long epic_data7;
-};
-
-struct el_apecs_procdata
-{
-	unsigned long paltemp[32];  /* PAL TEMP REGS. */
-	/* EV4-specific fields */
-	unsigned long exc_addr;     /* Address of excepting instruction. */
-	unsigned long exc_sum;      /* Summary of arithmetic traps. */
-	unsigned long exc_mask;     /* Exception mask (from exc_sum). */
-	unsigned long iccsr;        /* IBox hardware enables. */
-	unsigned long pal_base;     /* Base address for PALcode. */
-	unsigned long hier;         /* Hardware Interrupt Enable. */
-	unsigned long hirr;         /* Hardware Interrupt Request. */
-	unsigned long csr;          /* D-stream fault info. */
-	unsigned long dc_stat;      /* D-cache status (ECC/Parity Err). */
-	unsigned long dc_addr;      /* EV3 Phys Addr for ECC/DPERR. */
-	unsigned long abox_ctl;     /* ABox Control Register. */
-	unsigned long biu_stat;     /* BIU Status. */
-	unsigned long biu_addr;     /* BUI Address. */
-	unsigned long biu_ctl;      /* BIU Control. */
-	unsigned long fill_syndrome;/* For correcting ECC errors. */
-	unsigned long fill_addr;    /* Cache block which was being read */
-	unsigned long va;           /* Effective VA of fault or miss. */
-	unsigned long bc_tag;       /* Backup Cache Tag Probe Results.*/
-};
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * Unlike Jensen, the APECS machines have no concept of local
- * I/O---everything goes over the PCI bus.
- *
- * There is plenty room for optimization here.  In particular,
- * the Alpha's insb/insw/extb/extw should be useful in moving
- * data to/from the right byte-lanes.
- */
-
-#define vip	volatile int __force *
-#define vuip	volatile unsigned int __force *
-#define vulp	volatile unsigned long __force *
-
-#define APECS_SET_HAE						\
-	do {							\
-		if (addr >= (1UL << 24)) {			\
-			unsigned long msb = addr & 0xf8000000;	\
-			addr -= msb;				\
-			set_hae(msb);				\
-		}						\
-	} while (0)
-
-__EXTERN_INLINE unsigned int apecs_ioread8(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x00;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x00;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void apecs_iowrite8(u8 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x00;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x00;
-	}
-
-	w = __kernel_insbl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int apecs_ioread16(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x08;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x08;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void apecs_iowrite16(u16 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x08;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x08;
-	}
-
-	w = __kernel_inswl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int apecs_ioread32(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < APECS_DENSE_MEM)
-		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
-	return *(vuip)addr;
-}
-
-__EXTERN_INLINE void apecs_iowrite32(u32 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < APECS_DENSE_MEM)
-		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
-	*(vuip)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *apecs_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + APECS_IO);
-}
-
-__EXTERN_INLINE void __iomem *apecs_ioremap(unsigned long addr,
-					    unsigned long size)
-{
-	return (void __iomem *)(addr + APECS_DENSE_MEM);
-}
-
-__EXTERN_INLINE int apecs_is_ioaddr(unsigned long addr)
-{
-	return addr >= IDENT_ADDR + 0x180000000UL;
-}
-
-__EXTERN_INLINE int apecs_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= APECS_DENSE_MEM;
-}
-
-#undef APECS_SET_HAE
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		apecs
-#define apecs_trivial_io_bw	0
-#define apecs_trivial_io_lq	0
-#define apecs_trivial_rw_bw	2
-#define apecs_trivial_rw_lq	1
-#define apecs_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_APECS__H__ */
diff --git a/arch/alpha/include/asm/core_cia.h b/arch/alpha/include/asm/core_cia.h
index cb22991f6761..d26bdfb7ca3b 100644
--- a/arch/alpha/include/asm/core_cia.h
+++ b/arch/alpha/include/asm/core_cia.h
@@ -342,7 +342,7 @@ struct el_CIA_sysdata_mcheck {
 #define vuip	volatile unsigned int __force *
 #define vulp	volatile unsigned long __force *
 
-__EXTERN_INLINE unsigned int cia_ioread8(const void __iomem *xaddr)
+__EXTERN_INLINE u8 cia_ioread8(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	unsigned long result, base_and_type;
@@ -374,7 +374,7 @@ __EXTERN_INLINE void cia_iowrite8(u8 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + base_and_type) = w;
 }
 
-__EXTERN_INLINE unsigned int cia_ioread16(const void __iomem *xaddr)
+__EXTERN_INLINE u16 cia_ioread16(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	unsigned long result, base_and_type;
@@ -404,7 +404,7 @@ __EXTERN_INLINE void cia_iowrite16(u16 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + base_and_type) = w;
 }
 
-__EXTERN_INLINE unsigned int cia_ioread32(const void __iomem *xaddr)
+__EXTERN_INLINE u32 cia_ioread32(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	if (addr < CIA_DENSE_MEM)
@@ -420,6 +420,22 @@ __EXTERN_INLINE void cia_iowrite32(u32 b, void __iomem *xaddr)
 	*(vuip)addr = b;
 }
 
+__EXTERN_INLINE u64 cia_ioread64(const void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < CIA_DENSE_MEM)
+		addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18;
+	return *(vulp)addr;
+}
+
+__EXTERN_INLINE void cia_iowrite64(u64 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < CIA_DENSE_MEM)
+		addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18;
+	*(vulp)addr = b;
+}
+
 __EXTERN_INLINE void __iomem *cia_ioportmap(unsigned long addr)
 {
 	return (void __iomem *)(addr + CIA_IO);
diff --git a/arch/alpha/include/asm/core_lca.h b/arch/alpha/include/asm/core_lca.h
deleted file mode 100644
index ec86314418cb..000000000000
--- a/arch/alpha/include/asm/core_lca.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_LCA__H__
-#define __ALPHA_LCA__H__
-
-#include <asm/compiler.h>
-#include <asm/mce.h>
-
-/*
- * Low Cost Alpha (LCA) definitions (these apply to 21066 and 21068,
- * for example).
- *
- * This file is based on:
- *
- *	DECchip 21066 and DECchip 21068 Alpha AXP Microprocessors
- *	Hardware Reference Manual; Digital Equipment Corp.; May 1994;
- *	Maynard, MA; Order Number: EC-N2681-71.
- */
-
-/*
- * NOTE: The LCA uses a Host Address Extension (HAE) register to access
- *	 PCI addresses that are beyond the first 27 bits of address
- *	 space.  Updating the HAE requires an external cycle (and
- *	 a memory barrier), which tends to be slow.  Instead of updating
- *	 it on each sparse memory access, we keep the current HAE value
- *	 cached in variable cache_hae.  Only if the cached HAE differs
- *	 from the desired HAE value do we actually updated HAE register.
- *	 The HAE register is preserved by the interrupt handler entry/exit
- *	 code, so this scheme works even in the presence of interrupts.
- *
- * Dense memory space doesn't require the HAE, but is restricted to
- * aligned 32 and 64 bit accesses.  Special Cycle and Interrupt
- * Acknowledge cycles may also require the use of the HAE.  The LCA
- * limits I/O address space to the bottom 24 bits of address space,
- * but this easily covers the 16 bit ISA I/O address space.
- */
-
-/*
- * NOTE 2! The memory operations do not set any memory barriers, as
- * it's not needed for cases like a frame buffer that is essentially
- * memory-like.  You need to do them by hand if the operations depend
- * on ordering.
- *
- * Similarly, the port I/O operations do a "mb" only after a write
- * operation: if an mb is needed before (as in the case of doing
- * memory mapped I/O first, and then a port I/O operation to the same
- * device), it needs to be done by hand.
- *
- * After the above has bitten me 100 times, I'll give up and just do
- * the mb all the time, but right now I'm hoping this will work out.
- * Avoiding mb's may potentially be a noticeable speed improvement,
- * but I can't honestly say I've tested it.
- *
- * Handling interrupts that need to do mb's to synchronize to
- * non-interrupts is another fun race area.  Don't do it (because if
- * you do, I'll have to do *everything* with interrupts disabled,
- * ugh).
- */
-
-/*
- * Memory Controller registers:
- */
-#define LCA_MEM_BCR0		(IDENT_ADDR + 0x120000000UL)
-#define LCA_MEM_BCR1		(IDENT_ADDR + 0x120000008UL)
-#define LCA_MEM_BCR2		(IDENT_ADDR + 0x120000010UL)
-#define LCA_MEM_BCR3		(IDENT_ADDR + 0x120000018UL)
-#define LCA_MEM_BMR0		(IDENT_ADDR + 0x120000020UL)
-#define LCA_MEM_BMR1		(IDENT_ADDR + 0x120000028UL)
-#define LCA_MEM_BMR2		(IDENT_ADDR + 0x120000030UL)
-#define LCA_MEM_BMR3		(IDENT_ADDR + 0x120000038UL)
-#define LCA_MEM_BTR0		(IDENT_ADDR + 0x120000040UL)
-#define LCA_MEM_BTR1		(IDENT_ADDR + 0x120000048UL)
-#define LCA_MEM_BTR2		(IDENT_ADDR + 0x120000050UL)
-#define LCA_MEM_BTR3		(IDENT_ADDR + 0x120000058UL)
-#define LCA_MEM_GTR		(IDENT_ADDR + 0x120000060UL)
-#define LCA_MEM_ESR		(IDENT_ADDR + 0x120000068UL)
-#define LCA_MEM_EAR		(IDENT_ADDR + 0x120000070UL)
-#define LCA_MEM_CAR		(IDENT_ADDR + 0x120000078UL)
-#define LCA_MEM_VGR		(IDENT_ADDR + 0x120000080UL)
-#define LCA_MEM_PLM		(IDENT_ADDR + 0x120000088UL)
-#define LCA_MEM_FOR		(IDENT_ADDR + 0x120000090UL)
-
-/*
- * I/O Controller registers:
- */
-#define LCA_IOC_HAE		(IDENT_ADDR + 0x180000000UL)
-#define LCA_IOC_CONF		(IDENT_ADDR + 0x180000020UL)
-#define LCA_IOC_STAT0		(IDENT_ADDR + 0x180000040UL)
-#define LCA_IOC_STAT1		(IDENT_ADDR + 0x180000060UL)
-#define LCA_IOC_TBIA		(IDENT_ADDR + 0x180000080UL)
-#define LCA_IOC_TB_ENA		(IDENT_ADDR + 0x1800000a0UL)
-#define LCA_IOC_SFT_RST		(IDENT_ADDR + 0x1800000c0UL)
-#define LCA_IOC_PAR_DIS		(IDENT_ADDR + 0x1800000e0UL)
-#define LCA_IOC_W_BASE0		(IDENT_ADDR + 0x180000100UL)
-#define LCA_IOC_W_BASE1		(IDENT_ADDR + 0x180000120UL)
-#define LCA_IOC_W_MASK0		(IDENT_ADDR + 0x180000140UL)
-#define LCA_IOC_W_MASK1		(IDENT_ADDR + 0x180000160UL)
-#define LCA_IOC_T_BASE0		(IDENT_ADDR + 0x180000180UL)
-#define LCA_IOC_T_BASE1		(IDENT_ADDR + 0x1800001a0UL)
-#define LCA_IOC_TB_TAG0		(IDENT_ADDR + 0x188000000UL)
-#define LCA_IOC_TB_TAG1		(IDENT_ADDR + 0x188000020UL)
-#define LCA_IOC_TB_TAG2		(IDENT_ADDR + 0x188000040UL)
-#define LCA_IOC_TB_TAG3		(IDENT_ADDR + 0x188000060UL)
-#define LCA_IOC_TB_TAG4		(IDENT_ADDR + 0x188000070UL)
-#define LCA_IOC_TB_TAG5		(IDENT_ADDR + 0x1880000a0UL)
-#define LCA_IOC_TB_TAG6		(IDENT_ADDR + 0x1880000c0UL)
-#define LCA_IOC_TB_TAG7		(IDENT_ADDR + 0x1880000e0UL)
-
-/*
- * Memory spaces:
- */
-#define LCA_IACK_SC		(IDENT_ADDR + 0x1a0000000UL)
-#define LCA_CONF		(IDENT_ADDR + 0x1e0000000UL)
-#define LCA_IO			(IDENT_ADDR + 0x1c0000000UL)
-#define LCA_SPARSE_MEM		(IDENT_ADDR + 0x200000000UL)
-#define LCA_DENSE_MEM		(IDENT_ADDR + 0x300000000UL)
-
-/*
- * Bit definitions for I/O Controller status register 0:
- */
-#define LCA_IOC_STAT0_CMD		0xf
-#define LCA_IOC_STAT0_ERR		(1<<4)
-#define LCA_IOC_STAT0_LOST		(1<<5)
-#define LCA_IOC_STAT0_THIT		(1<<6)
-#define LCA_IOC_STAT0_TREF		(1<<7)
-#define LCA_IOC_STAT0_CODE_SHIFT	8
-#define LCA_IOC_STAT0_CODE_MASK		0x7
-#define LCA_IOC_STAT0_P_NBR_SHIFT	13
-#define LCA_IOC_STAT0_P_NBR_MASK	0x7ffff
-
-#define LCA_HAE_ADDRESS		LCA_IOC_HAE
-
-/* LCA PMR Power Management register defines */
-#define LCA_PMR_ADDR	(IDENT_ADDR + 0x120000098UL)
-#define LCA_PMR_PDIV    0x7                     /* Primary clock divisor */
-#define LCA_PMR_ODIV    0x38                    /* Override clock divisor */
-#define LCA_PMR_INTO    0x40                    /* Interrupt override */
-#define LCA_PMR_DMAO    0x80                    /* DMA override */
-#define LCA_PMR_OCCEB   0xffff0000L             /* Override cycle counter - even bits */
-#define LCA_PMR_OCCOB   0xffff000000000000L     /* Override cycle counter - even bits */
-#define LCA_PMR_PRIMARY_MASK    0xfffffffffffffff8L
-
-/* LCA PMR Macros */
-
-#define LCA_READ_PMR        (*(volatile unsigned long *)LCA_PMR_ADDR)
-#define LCA_WRITE_PMR(d)    (*((volatile unsigned long *)LCA_PMR_ADDR) = (d))
-
-#define LCA_GET_PRIMARY(r)  ((r) & LCA_PMR_PDIV)
-#define LCA_GET_OVERRIDE(r) (((r) >> 3) & LCA_PMR_PDIV)
-#define LCA_SET_PRIMARY_CLOCK(r, c) ((r) = (((r) & LCA_PMR_PRIMARY_MASK)|(c)))
-
-/* LCA PMR Divisor values */
-#define LCA_PMR_DIV_1   0x0
-#define LCA_PMR_DIV_1_5 0x1
-#define LCA_PMR_DIV_2   0x2
-#define LCA_PMR_DIV_4   0x3
-#define LCA_PMR_DIV_8   0x4
-#define LCA_PMR_DIV_16  0x5
-#define LCA_PMR_DIV_MIN DIV_1
-#define LCA_PMR_DIV_MAX DIV_16
-
-
-/*
- * Data structure for handling LCA machine checks.  Correctable errors
- * result in a short logout frame, uncorrectable ones in a long one.
- */
-struct el_lca_mcheck_short {
-	struct el_common	h;		/* common logout header */
-	unsigned long		esr;		/* error-status register */
-	unsigned long		ear;		/* error-address register */
-	unsigned long		dc_stat;	/* dcache status register */
-	unsigned long		ioc_stat0;	/* I/O controller status register 0 */
-	unsigned long		ioc_stat1;	/* I/O controller status register 1 */
-};
-
-struct el_lca_mcheck_long {
-	struct el_common	h;		/* common logout header */
-	unsigned long		pt[31];		/* PAL temps */
-	unsigned long		exc_addr;	/* exception address */
-	unsigned long		pad1[3];
-	unsigned long		pal_base;	/* PALcode base address */
-	unsigned long		hier;		/* hw interrupt enable */
-	unsigned long		hirr;		/* hw interrupt request */
-	unsigned long		mm_csr;		/* MMU control & status */
-	unsigned long		dc_stat;	/* data cache status */
-	unsigned long		dc_addr;	/* data cache addr register */
-	unsigned long		abox_ctl;	/* address box control register */
-	unsigned long		esr;		/* error status register */
-	unsigned long		ear;		/* error address register */
-	unsigned long		car;		/* cache control register */
-	unsigned long		ioc_stat0;	/* I/O controller status register 0 */
-	unsigned long		ioc_stat1;	/* I/O controller status register 1 */
-	unsigned long		va;		/* virtual address register */
-};
-
-union el_lca {
-	struct el_common *		c;
-	struct el_lca_mcheck_long *	l;
-	struct el_lca_mcheck_short *	s;
-};
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * Unlike Jensen, the Noname machines have no concept of local
- * I/O---everything goes over the PCI bus.
- *
- * There is plenty room for optimization here.  In particular,
- * the Alpha's insb/insw/extb/extw should be useful in moving
- * data to/from the right byte-lanes.
- */
-
-#define vip	volatile int __force *
-#define vuip	volatile unsigned int __force *
-#define vulp	volatile unsigned long __force *
-
-#define LCA_SET_HAE						\
-	do {							\
-		if (addr >= (1UL << 24)) {			\
-			unsigned long msb = addr & 0xf8000000;	\
-			addr -= msb;				\
-			set_hae(msb);				\
-		}						\
-	} while (0)
-
-
-__EXTERN_INLINE unsigned int lca_ioread8(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x00;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x00;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void lca_iowrite8(u8 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x00;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x00;
-	}
-
-	w = __kernel_insbl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int lca_ioread16(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x08;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x08;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void lca_iowrite16(u16 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x08;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x08;
-	}
-
-	w = __kernel_inswl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int lca_ioread32(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < LCA_DENSE_MEM)
-		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
-	return *(vuip)addr;
-}
-
-__EXTERN_INLINE void lca_iowrite32(u32 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < LCA_DENSE_MEM)
-		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
-	*(vuip)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *lca_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + LCA_IO);
-}
-
-__EXTERN_INLINE void __iomem *lca_ioremap(unsigned long addr,
-					  unsigned long size)
-{
-	return (void __iomem *)(addr + LCA_DENSE_MEM);
-}
-
-__EXTERN_INLINE int lca_is_ioaddr(unsigned long addr)
-{
-	return addr >= IDENT_ADDR + 0x120000000UL;
-}
-
-__EXTERN_INLINE int lca_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= LCA_DENSE_MEM;
-}
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		lca
-#define lca_trivial_rw_bw	2
-#define lca_trivial_rw_lq	1
-#define lca_trivial_io_bw	0
-#define lca_trivial_io_lq	0
-#define lca_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_LCA__H__ */
diff --git a/arch/alpha/include/asm/core_marvel.h b/arch/alpha/include/asm/core_marvel.h
index b266e02e284b..d99f3a82e0e5 100644
--- a/arch/alpha/include/asm/core_marvel.h
+++ b/arch/alpha/include/asm/core_marvel.h
@@ -332,10 +332,10 @@ struct io7 {
 #define vucp	volatile unsigned char __force *
 #define vusp	volatile unsigned short __force *
 
-extern unsigned int marvel_ioread8(const void __iomem *);
+extern u8 marvel_ioread8(const void __iomem *);
 extern void marvel_iowrite8(u8 b, void __iomem *);
 
-__EXTERN_INLINE unsigned int marvel_ioread16(const void __iomem *addr)
+__EXTERN_INLINE u16 marvel_ioread16(const void __iomem *addr)
 {
 	return __kernel_ldwu(*(vusp)addr);
 }
diff --git a/arch/alpha/include/asm/core_mcpcia.h b/arch/alpha/include/asm/core_mcpcia.h
index cb24d1bd6141..ed2bf8ad40ed 100644
--- a/arch/alpha/include/asm/core_mcpcia.h
+++ b/arch/alpha/include/asm/core_mcpcia.h
@@ -248,6 +248,7 @@ struct el_MCPCIA_uncorrected_frame_mcheck {
 
 #define vip	volatile int __force *
 #define vuip	volatile unsigned int __force *
+#define vulp	volatile unsigned long __force *
 
 #ifndef MCPCIA_ONE_HAE_WINDOW
 #define MCPCIA_FROB_MMIO						\
@@ -267,7 +268,7 @@ extern inline int __mcpcia_is_mmio(unsigned long addr)
 	return (addr & 0x80000000UL) == 0;
 }
 
-__EXTERN_INLINE unsigned int mcpcia_ioread8(const void __iomem *xaddr)
+__EXTERN_INLINE u8 mcpcia_ioread8(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
 	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
@@ -291,7 +292,7 @@ __EXTERN_INLINE void mcpcia_iowrite8(u8 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + hose + 0x00) = w;
 }
 
-__EXTERN_INLINE unsigned int mcpcia_ioread16(const void __iomem *xaddr)
+__EXTERN_INLINE u16 mcpcia_ioread16(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
 	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
@@ -315,7 +316,7 @@ __EXTERN_INLINE void mcpcia_iowrite16(u16 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + hose + 0x08) = w;
 }
 
-__EXTERN_INLINE unsigned int mcpcia_ioread32(const void __iomem *xaddr)
+__EXTERN_INLINE u32 mcpcia_ioread32(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long)xaddr;
 
@@ -335,6 +336,26 @@ __EXTERN_INLINE void mcpcia_iowrite32(u32 b, void __iomem *xaddr)
 	*(vuip)addr = b;
 }
 
+__EXTERN_INLINE u64 mcpcia_ioread64(const void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr;
+
+	if (!__mcpcia_is_mmio(addr))
+		addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
+
+	return *(vulp)addr;
+}
+
+__EXTERN_INLINE void mcpcia_iowrite64(u64 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr;
+
+	if (!__mcpcia_is_mmio(addr))
+		addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
+
+	*(vulp)addr = b;
+}
+
 
 __EXTERN_INLINE void __iomem *mcpcia_ioportmap(unsigned long addr)
 {
@@ -362,6 +383,7 @@ __EXTERN_INLINE int mcpcia_is_mmio(const volatile void __iomem *xaddr)
 
 #undef vip
 #undef vuip
+#undef vulp
 
 #undef __IO_PREFIX
 #define __IO_PREFIX		mcpcia
diff --git a/arch/alpha/include/asm/core_t2.h b/arch/alpha/include/asm/core_t2.h
index 12bb7addc789..ca9b091d9c5f 100644
--- a/arch/alpha/include/asm/core_t2.h
+++ b/arch/alpha/include/asm/core_t2.h
@@ -25,16 +25,8 @@
 #define T2_MEM_R1_MASK 0x07ffffff  /* Mem sparse region 1 mask is 27 bits */
 
 /* GAMMA-SABLE is a SABLE with EV5-based CPUs */
-/* All LYNX machines, EV4 or EV5, use the GAMMA bias also */
 #define _GAMMA_BIAS		0x8000000000UL
-
-#if defined(CONFIG_ALPHA_GENERIC)
-#define GAMMA_BIAS		alpha_mv.sys.t2.gamma_bias
-#elif defined(CONFIG_ALPHA_GAMMA)
 #define GAMMA_BIAS		_GAMMA_BIAS
-#else
-#define GAMMA_BIAS		0
-#endif
 
 /*
  * Memory spaces:
@@ -360,6 +352,7 @@ struct el_t2_frame_corrected {
 
 #define vip	volatile int *
 #define vuip	volatile unsigned int *
+#define vulp	volatile unsigned long *
 
 extern inline u8 t2_inb(unsigned long addr)
 {
@@ -402,6 +395,17 @@ extern inline void t2_outl(u32 b, unsigned long addr)
 	mb();
 }
 
+extern inline u64 t2_inq(unsigned long addr)
+{
+	return *(vulp) ((addr << 5) + T2_IO + 0x18);
+}
+
+extern inline void t2_outq(u64 b, unsigned long addr)
+{
+	*(vulp) ((addr << 5) + T2_IO + 0x18) = b;
+	mb();
+}
+
 
 /*
  * Memory functions.
@@ -572,7 +576,7 @@ __EXTERN_INLINE int t2_is_mmio(const volatile void __iomem *addr)
    it doesn't make sense to merge the pio and mmio routines.  */
 
 #define IOPORT(OS, NS)							\
-__EXTERN_INLINE unsigned int t2_ioread##NS(const void __iomem *xaddr)		\
+__EXTERN_INLINE u##NS t2_ioread##NS(const void __iomem *xaddr)		\
 {									\
 	if (t2_is_mmio(xaddr))						\
 		return t2_read##OS(xaddr);				\
@@ -590,11 +594,13 @@ __EXTERN_INLINE void t2_iowrite##NS(u##NS b, void __iomem *xaddr)	\
 IOPORT(b, 8)
 IOPORT(w, 16)
 IOPORT(l, 32)
+IOPORT(q, 64)
 
 #undef IOPORT
 
 #undef vip
 #undef vuip
+#undef vulp
 
 #undef __IO_PREFIX
 #define __IO_PREFIX		t2
diff --git a/arch/alpha/include/asm/div64.h b/arch/alpha/include/asm/div64.h
deleted file mode 100644
index 6cd978cefb28..000000000000
--- a/arch/alpha/include/asm/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h
index 0ee6a5c99b16..ad5a59b035cb 100644
--- a/arch/alpha/include/asm/dma-mapping.h
+++ b/arch/alpha/include/asm/dma-mapping.h
@@ -4,13 +4,9 @@
 
 extern const struct dma_map_ops alpha_pci_ops;
 
-static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
+static inline const struct dma_map_ops *get_arch_dma_ops(void)
 {
-#ifdef CONFIG_ALPHA_JENSEN
-	return NULL;
-#else
 	return &alpha_pci_ops;
-#endif
 }
 
 #endif	/* _ALPHA_DMA_MAPPING_H */
diff --git a/arch/alpha/include/asm/dma.h b/arch/alpha/include/asm/dma.h
index a04d76b96089..3a88812b7165 100644
--- a/arch/alpha/include/asm/dma.h
+++ b/arch/alpha/include/asm/dma.h
@@ -82,11 +82,6 @@
   just a wiring limit.
 */
 
-/* The maximum address for ISA DMA transfer on Alpha XL, due to an
-   hardware SIO limitation, is 64MB.
-*/
-#define ALPHA_XL_MAX_ISA_DMA_ADDRESS		0x04000000UL
-
 /* The maximum address for ISA DMA transfer on RUFFIAN,
    due to an hardware SIO limitation, is 16MB.
 */
@@ -107,9 +102,7 @@
 #ifdef CONFIG_ALPHA_GENERIC
 # define MAX_ISA_DMA_ADDRESS		(alpha_mv.max_isa_dma_address)
 #else
-# if defined(CONFIG_ALPHA_XL)
-#  define MAX_ISA_DMA_ADDRESS		ALPHA_XL_MAX_ISA_DMA_ADDRESS
-# elif defined(CONFIG_ALPHA_RUFFIAN)
+# if defined(CONFIG_ALPHA_RUFFIAN)
 #  define MAX_ISA_DMA_ADDRESS		ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS
 # elif defined(CONFIG_ALPHA_SABLE)
 #  define MAX_ISA_DMA_ADDRESS		ALPHA_SABLE_MAX_ISA_DMA_ADDRESS
diff --git a/arch/alpha/include/asm/elf.h b/arch/alpha/include/asm/elf.h
index 8049997fa372..50c82187e60e 100644
--- a/arch/alpha/include/asm/elf.h
+++ b/arch/alpha/include/asm/elf.h
@@ -74,7 +74,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 /*
  * This is used to ensure we don't load something for the wrong architecture.
  */
-#define elf_check_arch(x) ((x)->e_machine == EM_ALPHA)
+#define elf_check_arch(x) (((x)->e_machine == EM_ALPHA) && !((x)->e_flags & EF_ALPHA_32BIT))
 
 /*
  * These are used to set parameters in the core dumps.
@@ -120,12 +120,6 @@ extern int dump_elf_task(elf_greg_t *dest, struct task_struct *task);
 #define ELF_CORE_COPY_TASK_REGS(TASK, DEST) \
 	dump_elf_task(*(DEST), TASK)
 
-/* Similar, but for the FP registers.  */
-
-extern int dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task);
-#define ELF_CORE_COPY_FPREGS(TASK, DEST) \
-	dump_elf_task_fp(*(DEST), TASK)
-
 /* This yields a mask that user programs can use to figure out what
    instruction set this CPU supports.  This is trivial on Alpha, 
    but not so on other machines. */
@@ -139,16 +133,10 @@ extern int dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task);
 #define ELF_PLATFORM				\
 ({						\
 	enum implver_enum i_ = implver();	\
-	( i_ == IMPLVER_EV4 ? "ev4"		\
-	: i_ == IMPLVER_EV5			\
-	  ? (amask(AMASK_BWX) ? "ev5" : "ev56")	\
+	( i_ == IMPLVER_EV5 ? "ev56"			\
 	: amask (AMASK_CIX) ? "ev6" : "ev67");	\
 })
 
-#define SET_PERSONALITY(EX)					\
-	set_personality(((EX).e_flags & EF_ALPHA_32BIT)		\
-	   ? PER_LINUX_32BIT : PER_LINUX)
-
 extern int alpha_l1i_cacheshape;
 extern int alpha_l1d_cacheshape;
 extern int alpha_l2_cacheshape;
diff --git a/arch/alpha/include/asm/floppy.h b/arch/alpha/include/asm/floppy.h
index 64b42d9591fc..5a6239e65097 100644
--- a/arch/alpha/include/asm/floppy.h
+++ b/arch/alpha/include/asm/floppy.h
@@ -90,25 +90,6 @@ static int FDC2 = -1;
 #define N_FDC 2
 #define N_DRIVE 8
 
-/*
- * Most Alphas have no problems with floppy DMA crossing 64k borders,
- * except for certain ones, like XL and RUFFIAN.
- *
- * However, the test is simple and fast, and this *is* floppy, after all,
- * so we do it for all platforms, just to make sure.
- *
- * This is advantageous in other circumstances as well, as in moving
- * about the PCI DMA windows and forcing the floppy to start doing
- * scatter-gather when it never had before, and there *is* a problem
- * on that platform... ;-}
- */
-
-static inline unsigned long CROSS_64KB(void *a, unsigned long s)
-{
-	unsigned long p = (unsigned long)a;
-	return ((p + s - 1) ^ p) & ~0xffffUL;
-}
-
 #define EXTRA_FLOPPY_PARAMS
 
 #endif /* __ASM_ALPHA_FLOPPY_H */
diff --git a/arch/alpha/include/asm/fpu.h b/arch/alpha/include/asm/fpu.h
index b9691405e56b..30b24135dd7a 100644
--- a/arch/alpha/include/asm/fpu.h
+++ b/arch/alpha/include/asm/fpu.h
@@ -15,21 +15,27 @@ rdfpcr(void)
 {
 	unsigned long tmp, ret;
 
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		ret = current_thread_info()->fp[31];
+	} else {
 #if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
-	__asm__ __volatile__ (
-		"ftoit $f0,%0\n\t"
-		"mf_fpcr $f0\n\t"
-		"ftoit $f0,%1\n\t"
-		"itoft %0,$f0"
-		: "=r"(tmp), "=r"(ret));
+		__asm__ __volatile__ (
+			"ftoit $f0,%0\n\t"
+			"mf_fpcr $f0\n\t"
+			"ftoit $f0,%1\n\t"
+			"itoft %0,$f0"
+			: "=r"(tmp), "=r"(ret));
 #else
-	__asm__ __volatile__ (
-		"stt $f0,%0\n\t"
-		"mf_fpcr $f0\n\t"
-		"stt $f0,%1\n\t"
-		"ldt $f0,%0"
-		: "=m"(tmp), "=m"(ret));
+		__asm__ __volatile__ (
+			"stt $f0,%0\n\t"
+			"mf_fpcr $f0\n\t"
+			"stt $f0,%1\n\t"
+			"ldt $f0,%0"
+			: "=m"(tmp), "=m"(ret));
 #endif
+	}
+	preempt_enable();
 
 	return ret;
 }
@@ -39,21 +45,28 @@ wrfpcr(unsigned long val)
 {
 	unsigned long tmp;
 
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		current_thread_info()->status |= TS_RESTORE_FP;
+		current_thread_info()->fp[31] = val;
+	} else {
 #if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
-	__asm__ __volatile__ (
-		"ftoit $f0,%0\n\t"
-		"itoft %1,$f0\n\t"
-		"mt_fpcr $f0\n\t"
-		"itoft %0,$f0"
-		: "=&r"(tmp) : "r"(val));
+		__asm__ __volatile__ (
+			"ftoit $f0,%0\n\t"
+			"itoft %1,$f0\n\t"
+			"mt_fpcr $f0\n\t"
+			"itoft %0,$f0"
+			: "=&r"(tmp) : "r"(val));
 #else
-	__asm__ __volatile__ (
-		"stt $f0,%0\n\t"
-		"ldt $f0,%1\n\t"
-		"mt_fpcr $f0\n\t"
-		"ldt $f0,%0"
-		: "=m"(tmp) : "m"(val));
+		__asm__ __volatile__ (
+			"stt $f0,%0\n\t"
+			"ldt $f0,%1\n\t"
+			"mt_fpcr $f0\n\t"
+			"ldt $f0,%0"
+			: "=m"(tmp) : "m"(val));
 #endif
+	}
+	preempt_enable();
 }
 
 static inline unsigned long
diff --git a/arch/alpha/include/asm/hwrpb.h b/arch/alpha/include/asm/hwrpb.h
index fc76f36265ad..db831cf8de10 100644
--- a/arch/alpha/include/asm/hwrpb.h
+++ b/arch/alpha/include/asm/hwrpb.h
@@ -135,7 +135,7 @@ struct crb_struct {
 	/* virtual->physical map */
 	unsigned long map_entries;
 	unsigned long map_pages;
-	struct vf_map_struct map[1];
+	struct vf_map_struct map[];
 };
 
 struct memclust_struct {
diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h
index d277189b2677..fa3e4c246cda 100644
--- a/arch/alpha/include/asm/io.h
+++ b/arch/alpha/include/asm/io.h
@@ -10,14 +10,6 @@
 #include <asm/machvec.h>
 #include <asm/hwrpb.h>
 
-/* The generic header contains only prototypes.  Including it ensures that
-   the implementation we have here matches that interface.  */
-#include <asm-generic/iomap.h>
-
-/* We don't use IO slowdowns on the Alpha, but.. */
-#define __SLOW_DOWN_IO	do { } while (0)
-#define SLOW_DOWN_IO	do { } while (0)
-
 /*
  * Virtual -> physical identity mapping starts at this offset
  */
@@ -90,7 +82,8 @@ static inline void * phys_to_virt(unsigned long address)
 }
 #endif
 
-#define page_to_phys(page)	page_to_pa(page)
+#define virt_to_phys		virt_to_phys
+#define phys_to_virt		phys_to_virt
 
 /* Maximum PIO space address supported?  */
 #define IO_SPACE_LIMIT 0xffff
@@ -153,6 +146,7 @@ static inline void generic_##NAME(TYPE b, QUAL void __iomem *addr)	\
 REMAP1(unsigned int, ioread8, const)
 REMAP1(unsigned int, ioread16, const)
 REMAP1(unsigned int, ioread32, const)
+REMAP1(u64, ioread64, const)
 REMAP1(u8, readb, const volatile)
 REMAP1(u16, readw, const volatile)
 REMAP1(u32, readl, const volatile)
@@ -161,6 +155,7 @@ REMAP1(u64, readq, const volatile)
 REMAP2(u8, iowrite8, /**/)
 REMAP2(u16, iowrite16, /**/)
 REMAP2(u32, iowrite32, /**/)
+REMAP2(u64, iowrite64, /**/)
 REMAP2(u8, writeb, volatile)
 REMAP2(u16, writew, volatile)
 REMAP2(u32, writel, volatile)
@@ -203,16 +198,10 @@ static inline int generic_is_mmio(const volatile void __iomem *a)
 
 #else
 
-#if defined(CONFIG_ALPHA_APECS)
-# include <asm/core_apecs.h>
-#elif defined(CONFIG_ALPHA_CIA)
+#if defined(CONFIG_ALPHA_CIA)
 # include <asm/core_cia.h>
 #elif defined(CONFIG_ALPHA_IRONGATE)
 # include <asm/core_irongate.h>
-#elif defined(CONFIG_ALPHA_JENSEN)
-# include <asm/jensen.h>
-#elif defined(CONFIG_ALPHA_LCA)
-# include <asm/core_lca.h>
 #elif defined(CONFIG_ALPHA_MARVEL)
 # include <asm/core_marvel.h>
 #elif defined(CONFIG_ALPHA_MCPCIA)
@@ -242,6 +231,12 @@ extern u32		inl(unsigned long port);
 extern void		outb(u8 b, unsigned long port);
 extern void		outw(u16 b, unsigned long port);
 extern void		outl(u32 b, unsigned long port);
+#define inb inb
+#define inw inw
+#define inl inl
+#define outb outb
+#define outw outw
+#define outl outl
 
 extern u8		readb(const volatile void __iomem *addr);
 extern u16		readw(const volatile void __iomem *addr);
@@ -251,6 +246,14 @@ extern void		writeb(u8 b, volatile void __iomem *addr);
 extern void		writew(u16 b, volatile void __iomem *addr);
 extern void		writel(u32 b, volatile void __iomem *addr);
 extern void		writeq(u64 b, volatile void __iomem *addr);
+#define readb readb
+#define readw readw
+#define readl readl
+#define readq readq
+#define writeb writeb
+#define writew writew
+#define writel writel
+#define writeq writeq
 
 extern u8		__raw_readb(const volatile void __iomem *addr);
 extern u16		__raw_readw(const volatile void __iomem *addr);
@@ -260,14 +263,33 @@ extern void		__raw_writeb(u8 b, volatile void __iomem *addr);
 extern void		__raw_writew(u16 b, volatile void __iomem *addr);
 extern void		__raw_writel(u32 b, volatile void __iomem *addr);
 extern void		__raw_writeq(u64 b, volatile void __iomem *addr);
+#define __raw_readb __raw_readb
+#define __raw_readw __raw_readw
+#define __raw_readl __raw_readl
+#define __raw_readq __raw_readq
+#define __raw_writeb __raw_writeb
+#define __raw_writew __raw_writew
+#define __raw_writel __raw_writel
+#define __raw_writeq __raw_writeq
+
+extern unsigned int ioread8(const void __iomem *);
+extern unsigned int ioread16(const void __iomem *);
+extern unsigned int ioread32(const void __iomem *);
+extern u64 ioread64(const void __iomem *);
+
+extern void iowrite8(u8, void __iomem *);
+extern void iowrite16(u16, void __iomem *);
+extern void iowrite32(u32, void __iomem *);
+extern void iowrite64(u64, void __iomem *);
+
+extern void ioread8_rep(const void __iomem *port, void *buf, unsigned long count);
+extern void ioread16_rep(const void __iomem *port, void *buf, unsigned long count);
+extern void ioread32_rep(const void __iomem *port, void *buf, unsigned long count);
+
+extern void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count);
 
-/*
- * Mapping from port numbers to __iomem space is pretty easy.
- */
-
-/* These two have to be extern inline because of the extern prototype from
-   <asm-generic/iomap.h>.  It is not legal to mix "extern" and "static" for
-   the same declaration.  */
 extern inline void __iomem *ioport_map(unsigned long port, unsigned int size)
 {
 	return IO_CONCAT(__IO_PREFIX,ioportmap) (port);
@@ -277,13 +299,15 @@ extern inline void ioport_unmap(void __iomem *addr)
 {
 }
 
+#define ioport_map ioport_map
+#define ioport_unmap ioport_unmap
+
 static inline void __iomem *ioremap(unsigned long port, unsigned long size)
 {
 	return IO_CONCAT(__IO_PREFIX,ioremap) (port, size);
 }
 
 #define ioremap_wc ioremap
-#define ioremap_uc ioremap
 
 static inline void iounmap(volatile void __iomem *addr)
 {
@@ -358,6 +382,11 @@ extern inline void outw(u16 b, unsigned long port)
 }
 #endif
 
+#define ioread8 ioread8
+#define ioread16 ioread16
+#define iowrite8 iowrite8
+#define iowrite16 iowrite16
+
 #if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
 extern inline unsigned int ioread32(const void __iomem *addr)
 {
@@ -368,12 +397,27 @@ extern inline unsigned int ioread32(const void __iomem *addr)
 	return ret;
 }
 
+extern inline u64 ioread64(const void __iomem *addr)
+{
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread64)(addr);
+	mb();
+	return ret;
+}
+
 extern inline void iowrite32(u32 b, void __iomem *addr)
 {
 	mb();
 	IO_CONCAT(__IO_PREFIX, iowrite32)(b, addr);
 }
 
+extern inline void iowrite64(u64 b, void __iomem *addr)
+{
+	mb();
+	IO_CONCAT(__IO_PREFIX, iowrite64)(b, addr);
+}
+
 extern inline u32 inl(unsigned long port)
 {
 	return ioread32(ioport_map(port, 4));
@@ -385,6 +429,11 @@ extern inline void outl(u32 b, unsigned long port)
 }
 #endif
 
+#define ioread32 ioread32
+#define ioread64 ioread64
+#define iowrite32 iowrite32
+#define iowrite64 iowrite64
+
 #if IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 1
 extern inline u8 __raw_readb(const volatile void __iomem *addr)
 {
@@ -491,8 +540,10 @@ extern inline void writeq(u64 b, volatile void __iomem *addr)
 
 #define ioread16be(p) swab16(ioread16(p))
 #define ioread32be(p) swab32(ioread32(p))
+#define ioread64be(p) swab64(ioread64(p))
 #define iowrite16be(v,p) iowrite16(swab16(v), (p))
 #define iowrite32be(v,p) iowrite32(swab32(v), (p))
+#define iowrite64be(v,p) iowrite64(swab64(v), (p))
 
 #define inb_p		inb
 #define inw_p		inw
@@ -505,6 +556,10 @@ extern u8 readb_relaxed(const volatile void __iomem *addr);
 extern u16 readw_relaxed(const volatile void __iomem *addr);
 extern u32 readl_relaxed(const volatile void __iomem *addr);
 extern u64 readq_relaxed(const volatile void __iomem *addr);
+#define readb_relaxed readb_relaxed
+#define readw_relaxed readw_relaxed
+#define readl_relaxed readl_relaxed
+#define readq_relaxed readq_relaxed
 
 #if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
 extern inline u8 readb_relaxed(const volatile void __iomem *addr)
@@ -557,6 +612,10 @@ static inline void memsetw_io(volatile void __iomem *addr, u16 c, long len)
 	_memset_c_io(addr, 0x0001000100010001UL * c, len);
 }
 
+#define memset_io memset_io
+#define memcpy_fromio memcpy_fromio
+#define memcpy_toio memcpy_toio
+
 /*
  * String versions of in/out ops:
  */
@@ -567,40 +626,27 @@ extern void outsb (unsigned long port, const void *src, unsigned long count);
 extern void outsw (unsigned long port, const void *src, unsigned long count);
 extern void outsl (unsigned long port, const void *src, unsigned long count);
 
-/*
- * The Alpha Jensen hardware for some rather strange reason puts
- * the RTC clock at 0x170 instead of 0x70. Probably due to some
- * misguided idea about using 0x70 for NMI stuff.
- *
- * These defines will override the defaults when doing RTC queries
- */
+#define insb insb
+#define insw insw
+#define insl insl
+#define outsb outsb
+#define outsw outsw
+#define outsl outsl
 
-#ifdef CONFIG_ALPHA_GENERIC
-# define RTC_PORT(x)	((x) + alpha_mv.rtc_port)
-#else
-# ifdef CONFIG_ALPHA_JENSEN
-#  define RTC_PORT(x)	(0x170+(x))
-# else
-#  define RTC_PORT(x)	(0x70 + (x))
-# endif
-#endif
+#define RTC_PORT(x)	(0x70 + (x))
 #define RTC_ALWAYS_BCD	0
 
-/*
- * Some mucking forons use if[n]def writeq to check if platform has it.
- * It's a bloody bad idea and we probably want ARCH_HAS_WRITEQ for them
- * to play with; for now just use cpp anti-recursion logics and make sure
- * that damn thing is defined and expands to itself.
- */
-
-#define writeq writeq
-#define readq readq
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
+#define ioread64 ioread64
+#define iowrite64 iowrite64
+#define ioread8_rep ioread8_rep
+#define ioread16_rep ioread16_rep
+#define ioread32_rep ioread32_rep
+#define iowrite8_rep iowrite8_rep
+#define iowrite16_rep iowrite16_rep
+#define iowrite32_rep iowrite32_rep
+#define pci_iounmap pci_iounmap
+
+#include <asm-generic/io.h>
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/alpha/include/asm/io_trivial.h b/arch/alpha/include/asm/io_trivial.h
index a1a29cbe02fa..00032093bcfc 100644
--- a/arch/alpha/include/asm/io_trivial.h
+++ b/arch/alpha/include/asm/io_trivial.h
@@ -6,13 +6,13 @@
 /* This file may be included multiple times.  */
 
 #if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
-__EXTERN_INLINE unsigned int
+__EXTERN_INLINE u8
 IO_CONCAT(__IO_PREFIX,ioread8)(const void __iomem *a)
 {
 	return __kernel_ldbu(*(const volatile u8 __force *)a);
 }
 
-__EXTERN_INLINE unsigned int
+__EXTERN_INLINE u16
 IO_CONCAT(__IO_PREFIX,ioread16)(const void __iomem *a)
 {
 	return __kernel_ldwu(*(const volatile u16 __force *)a);
@@ -32,7 +32,7 @@ IO_CONCAT(__IO_PREFIX,iowrite16)(u16 b, void __iomem *a)
 #endif
 
 #if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
-__EXTERN_INLINE unsigned int
+__EXTERN_INLINE u32
 IO_CONCAT(__IO_PREFIX,ioread32)(const void __iomem *a)
 {
 	return *(const volatile u32 __force *)a;
@@ -43,6 +43,18 @@ IO_CONCAT(__IO_PREFIX,iowrite32)(u32 b, void __iomem *a)
 {
 	*(volatile u32 __force *)a = b;
 }
+
+__EXTERN_INLINE u64
+IO_CONCAT(__IO_PREFIX,ioread64)(const void __iomem *a)
+{
+	return *(const volatile u64 __force *)a;
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,iowrite64)(u64 b, void __iomem *a)
+{
+	*(volatile u64 __force *)a = b;
+}
 #endif
 
 #if IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 1
diff --git a/arch/alpha/include/asm/irq.h b/arch/alpha/include/asm/irq.h
index 432402c8e47f..d83b26b6660f 100644
--- a/arch/alpha/include/asm/irq.h
+++ b/arch/alpha/include/asm/irq.h
@@ -31,16 +31,11 @@
 #  define NR_IRQS      (32768 + 16)    /* marvel - 32 pids */
 # endif
 
-#elif defined(CONFIG_ALPHA_CABRIOLET) || \
-      defined(CONFIG_ALPHA_EB66P)     || \
-      defined(CONFIG_ALPHA_EB164)     || \
-      defined(CONFIG_ALPHA_PC164)     || \
+#elif defined(CONFIG_ALPHA_PC164)     || \
       defined(CONFIG_ALPHA_LX164)
 # define NR_IRQS	35
 
-#elif defined(CONFIG_ALPHA_EB66)      || \
-      defined(CONFIG_ALPHA_EB64P)     || \
-      defined(CONFIG_ALPHA_MIKASA)
+#elif defined(CONFIG_ALPHA_MIKASA)
 # define NR_IRQS	32
 
 #elif defined(CONFIG_ALPHA_ALCOR)     || \
@@ -55,7 +50,6 @@
 # define NR_IRQS	40
 
 #elif defined(CONFIG_ALPHA_DP264) || \
-      defined(CONFIG_ALPHA_LYNX)  || \
       defined(CONFIG_ALPHA_SHARK)
 # define NR_IRQS	64
 
diff --git a/arch/alpha/include/asm/irq_regs.h b/arch/alpha/include/asm/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/arch/alpha/include/asm/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/arch/alpha/include/asm/jensen.h b/arch/alpha/include/asm/jensen.h
deleted file mode 100644
index 1c4131453db2..000000000000
--- a/arch/alpha/include/asm/jensen.h
+++ /dev/null
@@ -1,347 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_JENSEN_H
-#define __ALPHA_JENSEN_H
-
-#include <asm/compiler.h>
-
-/*
- * Defines for the AlphaPC EISA IO and memory address space.
- */
-
-/*
- * NOTE! The memory operations do not set any memory barriers, as it's
- * not needed for cases like a frame buffer that is essentially memory-like.
- * You need to do them by hand if the operations depend on ordering.
- *
- * Similarly, the port IO operations do a "mb" only after a write operation:
- * if an mb is needed before (as in the case of doing memory mapped IO
- * first, and then a port IO operation to the same device), it needs to be
- * done by hand.
- *
- * After the above has bitten me 100 times, I'll give up and just do the
- * mb all the time, but right now I'm hoping this will work out.  Avoiding
- * mb's may potentially be a noticeable speed improvement, but I can't
- * honestly say I've tested it.
- *
- * Handling interrupts that need to do mb's to synchronize to non-interrupts
- * is another fun race area.  Don't do it (because if you do, I'll have to
- * do *everything* with interrupts disabled, ugh).
- */
-
-/*
- * EISA Interrupt Acknowledge address
- */
-#define EISA_INTA		(IDENT_ADDR + 0x100000000UL)
-
-/*
- * FEPROM addresses
- */
-#define EISA_FEPROM0		(IDENT_ADDR + 0x180000000UL)
-#define EISA_FEPROM1		(IDENT_ADDR + 0x1A0000000UL)
-
-/*
- * VL82C106 base address
- */
-#define EISA_VL82C106		(IDENT_ADDR + 0x1C0000000UL)
-
-/*
- * EISA "Host Address Extension" address (bits 25-31 of the EISA address)
- */
-#define EISA_HAE		(IDENT_ADDR + 0x1D0000000UL)
-
-/*
- * "SYSCTL" register address
- */
-#define EISA_SYSCTL		(IDENT_ADDR + 0x1E0000000UL)
-
-/*
- * "spare" register address
- */
-#define EISA_SPARE		(IDENT_ADDR + 0x1F0000000UL)
-
-/*
- * EISA memory address offset
- */
-#define EISA_MEM		(IDENT_ADDR + 0x200000000UL)
-
-/*
- * EISA IO address offset
- */
-#define EISA_IO			(IDENT_ADDR + 0x300000000UL)
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * Handle the "host address register". This needs to be set
- * to the high 7 bits of the EISA address.  This is also needed
- * for EISA IO addresses, which are only 16 bits wide (the
- * hae needs to be set to 0).
- *
- * HAE isn't needed for the local IO operations, though.
- */
-
-#define JENSEN_HAE_ADDRESS	EISA_HAE
-#define JENSEN_HAE_MASK		0x1ffffff
-
-__EXTERN_INLINE void jensen_set_hae(unsigned long addr)
-{
-	/* hae on the Jensen is bits 31:25 shifted right */
-	addr >>= 25;
-	if (addr != alpha_mv.hae_cache)
-		set_hae(addr);
-}
-
-#define vuip	volatile unsigned int *
-
-/*
- * IO functions
- *
- * The "local" functions are those that don't go out to the EISA bus,
- * but instead act on the VL82C106 chip directly.. This is mainly the
- * keyboard, RTC,  printer and first two serial lines..
- *
- * The local stuff makes for some complications, but it seems to be
- * gone in the PCI version. I hope I can get DEC suckered^H^H^H^H^H^H^H^H
- * convinced that I need one of the newer machines.
- */
-
-__EXTERN_INLINE unsigned int jensen_local_inb(unsigned long addr)
-{
-	return 0xff & *(vuip)((addr << 9) + EISA_VL82C106);
-}
-
-__EXTERN_INLINE void jensen_local_outb(u8 b, unsigned long addr)
-{
-	*(vuip)((addr << 9) + EISA_VL82C106) = b;
-	mb();
-}
-
-__EXTERN_INLINE unsigned int jensen_bus_inb(unsigned long addr)
-{
-	long result;
-
-	jensen_set_hae(0);
-	result = *(volatile int *)((addr << 7) + EISA_IO + 0x00);
-	return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void jensen_bus_outb(u8 b, unsigned long addr)
-{
-	jensen_set_hae(0);
-	*(vuip)((addr << 7) + EISA_IO + 0x00) = b * 0x01010101;
-	mb();
-}
-
-/*
- * It seems gcc is not very good at optimizing away logical
- * operations that result in operations across inline functions.
- * Which is why this is a macro.
- */
-
-#define jensen_is_local(addr) ( \
-/* keyboard */	(addr == 0x60 || addr == 0x64) || \
-/* RTC */	(addr == 0x170 || addr == 0x171) || \
-/* mb COM2 */	(addr >= 0x2f8 && addr <= 0x2ff) || \
-/* mb LPT1 */	(addr >= 0x3bc && addr <= 0x3be) || \
-/* mb COM2 */	(addr >= 0x3f8 && addr <= 0x3ff))
-
-__EXTERN_INLINE u8 jensen_inb(unsigned long addr)
-{
-	if (jensen_is_local(addr))
-		return jensen_local_inb(addr);
-	else
-		return jensen_bus_inb(addr);
-}
-
-__EXTERN_INLINE void jensen_outb(u8 b, unsigned long addr)
-{
-	if (jensen_is_local(addr))
-		jensen_local_outb(b, addr);
-	else
-		jensen_bus_outb(b, addr);
-}
-
-__EXTERN_INLINE u16 jensen_inw(unsigned long addr)
-{
-	long result;
-
-	jensen_set_hae(0);
-	result = *(volatile int *) ((addr << 7) + EISA_IO + 0x20);
-	result >>= (addr & 3) * 8;
-	return 0xffffUL & result;
-}
-
-__EXTERN_INLINE u32 jensen_inl(unsigned long addr)
-{
-	jensen_set_hae(0);
-	return *(vuip) ((addr << 7) + EISA_IO + 0x60);
-}
-
-__EXTERN_INLINE void jensen_outw(u16 b, unsigned long addr)
-{
-	jensen_set_hae(0);
-	*(vuip) ((addr << 7) + EISA_IO + 0x20) = b * 0x00010001;
-	mb();
-}
-
-__EXTERN_INLINE void jensen_outl(u32 b, unsigned long addr)
-{
-	jensen_set_hae(0);
-	*(vuip) ((addr << 7) + EISA_IO + 0x60) = b;
-	mb();
-}
-
-/*
- * Memory functions.
- */
-
-__EXTERN_INLINE u8 jensen_readb(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	long result;
-
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x00);
-	result >>= (addr & 3) * 8;
-	return 0xffUL & result;
-}
-
-__EXTERN_INLINE u16 jensen_readw(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	long result;
-
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x20);
-	result >>= (addr & 3) * 8;
-	return 0xffffUL & result;
-}
-
-__EXTERN_INLINE u32 jensen_readl(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	return *(vuip) ((addr << 7) + EISA_MEM + 0x60);
-}
-
-__EXTERN_INLINE u64 jensen_readq(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long r0, r1;
-
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	addr = (addr << 7) + EISA_MEM + 0x60;
-	r0 = *(vuip) (addr);
-	r1 = *(vuip) (addr + (4 << 7));
-	return r1 << 32 | r0;
-}
-
-__EXTERN_INLINE void jensen_writeb(u8 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	*(vuip) ((addr << 7) + EISA_MEM + 0x00) = b * 0x01010101;
-}
-
-__EXTERN_INLINE void jensen_writew(u16 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	*(vuip) ((addr << 7) + EISA_MEM + 0x20) = b * 0x00010001;
-}
-
-__EXTERN_INLINE void jensen_writel(u32 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	*(vuip) ((addr << 7) + EISA_MEM + 0x60) = b;
-}
-
-__EXTERN_INLINE void jensen_writeq(u64 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	addr = (addr << 7) + EISA_MEM + 0x60;
-	*(vuip) (addr) = b;
-	*(vuip) (addr + (4 << 7)) = b >> 32;
-}
-
-__EXTERN_INLINE void __iomem *jensen_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-
-__EXTERN_INLINE void __iomem *jensen_ioremap(unsigned long addr,
-					     unsigned long size)
-{
-	return (void __iomem *)(addr + 0x100000000ul);
-}
-
-__EXTERN_INLINE int jensen_is_ioaddr(unsigned long addr)
-{
-	return (long)addr >= 0;
-}
-
-__EXTERN_INLINE int jensen_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= 0x100000000ul;
-}
-
-/* New-style ioread interface.  All the routines are so ugly for Jensen
-   that it doesn't make sense to merge them.  */
-
-#define IOPORT(OS, NS)							\
-__EXTERN_INLINE unsigned int jensen_ioread##NS(const void __iomem *xaddr)	\
-{									\
-	if (jensen_is_mmio(xaddr))					\
-		return jensen_read##OS(xaddr - 0x100000000ul);		\
-	else								\
-		return jensen_in##OS((unsigned long)xaddr);		\
-}									\
-__EXTERN_INLINE void jensen_iowrite##NS(u##NS b, void __iomem *xaddr)	\
-{									\
-	if (jensen_is_mmio(xaddr))					\
-		jensen_write##OS(b, xaddr - 0x100000000ul);		\
-	else								\
-		jensen_out##OS(b, (unsigned long)xaddr);		\
-}
-
-IOPORT(b, 8)
-IOPORT(w, 16)
-IOPORT(l, 32)
-
-#undef IOPORT
-
-#undef vuip
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		jensen
-#define jensen_trivial_rw_bw	0
-#define jensen_trivial_rw_lq	0
-#define jensen_trivial_io_bw	0
-#define jensen_trivial_io_lq	0
-#define jensen_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_JENSEN_H */
diff --git a/arch/alpha/include/asm/kdebug.h b/arch/alpha/include/asm/kdebug.h
deleted file mode 100644
index 6ece1b037665..000000000000
--- a/arch/alpha/include/asm/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/arch/alpha/include/asm/local.h b/arch/alpha/include/asm/local.h
index fab26a1c93d5..88eb398947a5 100644
--- a/arch/alpha/include/asm/local.h
+++ b/arch/alpha/include/asm/local.h
@@ -52,33 +52,40 @@ static __inline__ long local_sub_return(long i, local_t * l)
 	return result;
 }
 
-#define local_cmpxchg(l, o, n) \
-	(cmpxchg_local(&((l)->a.counter), (o), (n)))
+static __inline__ long local_cmpxchg(local_t *l, long old, long new)
+{
+	return cmpxchg_local(&l->a.counter, old, new);
+}
+
+static __inline__ bool local_try_cmpxchg(local_t *l, long *old, long new)
+{
+	return try_cmpxchg_local(&l->a.counter, (s64 *)old, new);
+}
+
 #define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n)))
 
 /**
- * local_add_unless - add unless the number is a given value
+ * local_add_unless - add unless the number is already a given value
  * @l: pointer of type local_t
  * @a: the amount to add to l...
  * @u: ...unless l is equal to u.
  *
- * Atomically adds @a to @l, so long as it was not @u.
- * Returns non-zero if @l was not @u, and zero otherwise.
+ * Atomically adds @a to @l, if @v was not already @u.
+ * Returns true if the addition was done.
  */
-#define local_add_unless(l, a, u)				\
-({								\
-	long c, old;						\
-	c = local_read(l);					\
-	for (;;) {						\
-		if (unlikely(c == (u)))				\
-			break;					\
-		old = local_cmpxchg((l), c, c + (a));	\
-		if (likely(old == c))				\
-			break;					\
-		c = old;					\
-	}							\
-	c != (u);						\
-})
+static __inline__ bool
+local_add_unless(local_t *l, long a, long u)
+{
+	long c = local_read(l);
+
+	do {
+		if (unlikely(c == u))
+			return false;
+	} while (!local_try_cmpxchg(l, &c, c + a));
+
+	return true;
+}
+
 #define local_inc_not_zero(l) local_add_unless((l), 1, 0)
 
 #define local_add_negative(a, l) (local_add_return((a), (l)) < 0)
diff --git a/arch/alpha/include/asm/machvec.h b/arch/alpha/include/asm/machvec.h
index e49fabce7b33..490fc880bb3f 100644
--- a/arch/alpha/include/asm/machvec.h
+++ b/arch/alpha/include/asm/machvec.h
@@ -46,13 +46,15 @@ struct alpha_machine_vector
 	void (*mv_pci_tbi)(struct pci_controller *hose,
 			   dma_addr_t start, dma_addr_t end);
 
-	unsigned int (*mv_ioread8)(const void __iomem *);
-	unsigned int (*mv_ioread16)(const void __iomem *);
-	unsigned int (*mv_ioread32)(const void __iomem *);
+	u8 (*mv_ioread8)(const void __iomem *);
+	u16 (*mv_ioread16)(const void __iomem *);
+	u32 (*mv_ioread32)(const void __iomem *);
+	u64 (*mv_ioread64)(const void __iomem *);
 
 	void (*mv_iowrite8)(u8, void __iomem *);
 	void (*mv_iowrite16)(u16, void __iomem *);
 	void (*mv_iowrite32)(u32, void __iomem *);
+	void (*mv_iowrite64)(u64, void __iomem *);
 
 	u8 (*mv_readb)(const volatile void __iomem *);
 	u16 (*mv_readw)(const volatile void __iomem *);
@@ -70,15 +72,6 @@ struct alpha_machine_vector
 	int (*mv_is_ioaddr)(unsigned long);
 	int (*mv_is_mmio)(const volatile void __iomem *);
 
-	void (*mv_switch_mm)(struct mm_struct *, struct mm_struct *,
-			     struct task_struct *);
-	void (*mv_activate_mm)(struct mm_struct *, struct mm_struct *);
-
-	void (*mv_flush_tlb_current)(struct mm_struct *);
-	void (*mv_flush_tlb_current_page)(struct mm_struct * mm,
-					  struct vm_area_struct *vma,
-					  unsigned long addr);
-
 	void (*update_irq_hw)(unsigned long, unsigned long, int);
 	void (*ack_irq)(unsigned long);
 	void (*device_interrupt)(unsigned long vector);
diff --git a/arch/alpha/include/asm/mmu_context.h b/arch/alpha/include/asm/mmu_context.h
index 4eea7c616992..eee8fe836a59 100644
--- a/arch/alpha/include/asm/mmu_context.h
+++ b/arch/alpha/include/asm/mmu_context.h
@@ -71,9 +71,7 @@ __reload_thread(struct pcb_struct *pcb)
 #ifdef CONFIG_ALPHA_GENERIC
 # define MAX_ASN	(alpha_mv.max_asn)
 #else
-# ifdef CONFIG_ALPHA_EV4
-#  define MAX_ASN	EV4_MAX_ASN
-# elif defined(CONFIG_ALPHA_EV5)
+# if defined(CONFIG_ALPHA_EV56)
 #  define MAX_ASN	EV5_MAX_ASN
 # else
 #  define MAX_ASN	EV6_MAX_ASN
@@ -162,27 +160,9 @@ ev5_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
 	task_thread_info(next)->pcb.asn = mmc & HARDWARE_ASN_MASK;
 }
 
-__EXTERN_INLINE void
-ev4_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
-	      struct task_struct *next)
-{
-	/* As described, ASN's are broken for TLB usage.  But we can
-	   optimize for switching between threads -- if the mm is
-	   unchanged from current we needn't flush.  */
-	/* ??? May not be needed because EV4 PALcode recognizes that
-	   ASN's are broken and does a tbiap itself on swpctx, under
-	   the "Must set ASN or flush" rule.  At least this is true
-	   for a 1992 SRM, reports Joseph Martin (jmartin@hlo.dec.com).
-	   I'm going to leave this here anyway, just to Be Sure.  -- r~  */
-	if (prev_mm != next_mm)
-		tbiap();
-
-	/* Do continue to allocate ASNs, because we can still use them
-	   to avoid flushing the icache.  */
-	ev5_switch_mm(prev_mm, next_mm, next);
-}
-
 extern void __load_new_mm_context(struct mm_struct *);
+asmlinkage void do_page_fault(unsigned long address, unsigned long mmcsr,
+			      long cause, struct pt_regs *regs);
 
 #ifdef CONFIG_SMP
 #define check_mmu_context()					\
@@ -207,25 +187,8 @@ ev5_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
 	__load_new_mm_context(next_mm);
 }
 
-__EXTERN_INLINE void
-ev4_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
-{
-	__load_new_mm_context(next_mm);
-	tbiap();
-}
-
-#ifdef CONFIG_ALPHA_GENERIC
-# define switch_mm(a,b,c)	alpha_mv.mv_switch_mm((a),(b),(c))
-# define activate_mm(x,y)	alpha_mv.mv_activate_mm((x),(y))
-#else
-# ifdef CONFIG_ALPHA_EV4
-#  define switch_mm(a,b,c)	ev4_switch_mm((a),(b),(c))
-#  define activate_mm(x,y)	ev4_activate_mm((x),(y))
-# else
-#  define switch_mm(a,b,c)	ev5_switch_mm((a),(b),(c))
-#  define activate_mm(x,y)	ev5_activate_mm((x),(y))
-# endif
-#endif
+#define switch_mm(a,b,c)	ev5_switch_mm((a),(b),(c))
+#define activate_mm(x,y)	ev5_activate_mm((x),(y))
 
 #define init_new_context init_new_context
 static inline int
diff --git a/arch/alpha/include/asm/page.h b/arch/alpha/include/asm/page.h
index 8f3f5eecba28..5ec4c77e432e 100644
--- a/arch/alpha/include/asm/page.h
+++ b/arch/alpha/include/asm/page.h
@@ -4,11 +4,7 @@
 
 #include <linux/const.h>
 #include <asm/pal.h>
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT	13
-#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
-#define PAGE_MASK	(~(PAGE_SIZE-1))
+#include <vdso/page.h>
 
 #ifndef __ASSEMBLY__
 
@@ -17,9 +13,8 @@
 extern void clear_page(void *page);
 #define clear_user_page(page, vaddr, pg)	clear_page(page)
 
-#define alloc_zeroed_user_highpage_movable(vma, vaddr) \
-	alloc_page_vma(GFP_HIGHUSER_MOVABLE | __GFP_ZERO, vma, vaddr)
-#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE_MOVABLE
+#define vma_alloc_zeroed_movable_folio(vma, vaddr) \
+	vma_alloc_folio(GFP_HIGHUSER_MOVABLE | __GFP_ZERO, 0, vma, vaddr)
 
 extern void copy_page(void * _to, void * _from);
 #define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
@@ -87,10 +82,6 @@ typedef struct page *pgtable_t;
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define virt_addr_valid(kaddr)	pfn_valid((__pa(kaddr) >> PAGE_SHIFT))
 
-#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn)		((pfn) < max_mapnr)
-#endif /* CONFIG_FLATMEM */
-
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>
 
diff --git a/arch/alpha/include/asm/param.h b/arch/alpha/include/asm/param.h
deleted file mode 100644
index cfe947ce9461..000000000000
--- a/arch/alpha/include/asm/param.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_ALPHA_PARAM_H
-#define _ASM_ALPHA_PARAM_H
-
-#include <uapi/asm/param.h>
-
-# undef HZ
-# define HZ		CONFIG_HZ
-# define USER_HZ	1024
-# define CLOCKS_PER_SEC	USER_HZ	/* frequency at which times() counts */
-
-#endif /* _ASM_ALPHA_PARAM_H */
diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h
index 6312656279d7..6c04fcbdc8ed 100644
--- a/arch/alpha/include/asm/pci.h
+++ b/arch/alpha/include/asm/pci.h
@@ -88,7 +88,4 @@ extern void pci_adjust_legacy_attr(struct pci_bus *bus,
 				   enum pci_mmap_state mmap_type);
 #define HAVE_PCI_LEGACY	1
 
-extern int pci_create_resource_files(struct pci_dev *dev);
-extern void pci_remove_resource_files(struct pci_dev *dev);
-
 #endif /* __ALPHA_PCI_H */
diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 6923249f2d49..4383d66341dc 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -9,10 +9,9 @@
  * way above 4G.
  *
  * Always use weak definitions for percpu variables in modules.
+ * Therefore, we have enabled CONFIG_ARCH_MODULE_NEEDS_WEAK_PER_CPU
+ * in the Kconfig.
  */
-#if defined(MODULE) && defined(CONFIG_SMP)
-#define ARCH_NEEDS_WEAK_PER_CPU
-#endif
 
 #include <asm-generic/percpu.h>
 
diff --git a/arch/alpha/include/asm/pgtable.h b/arch/alpha/include/asm/pgtable.h
index 3ea9661c09ff..90e7a9539102 100644
--- a/arch/alpha/include/asm/pgtable.h
+++ b/arch/alpha/include/asm/pgtable.h
@@ -26,7 +26,6 @@ struct vm_area_struct;
  * hook is made available.
  */
 #define set_pte(pteptr, pteval) ((*(pteptr)) = (pteval))
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
 
 /* PMD_SHIFT determines the size of the area a second-level page table can map */
 #define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-3))
@@ -74,6 +73,9 @@ struct vm_area_struct;
 #define _PAGE_DIRTY	0x20000
 #define _PAGE_ACCESSED	0x40000
 
+/* We borrow bit 39 to store the exclusive marker in swap PTEs. */
+#define _PAGE_SWP_EXCLUSIVE	0x8000000000UL
+
 /*
  * NOTE! The "accessed" bit isn't necessarily exact:  it can be kept exactly
  * by software (use the KRE/URE/KWE/UWE bits appropriately), but I'll fake it.
@@ -105,7 +107,7 @@ struct vm_area_struct;
 
 #define _PAGE_NORMAL(x) __pgprot(_PAGE_VALID | __ACCESS_BITS | (x))
 
-#define _PAGE_P(x) _PAGE_NORMAL((x) | (((x) & _PAGE_FOW)?0:_PAGE_FOW))
+#define _PAGE_P(x) _PAGE_NORMAL((x) | _PAGE_FOW)
 #define _PAGE_S(x) _PAGE_NORMAL(x)
 
 /*
@@ -124,34 +126,11 @@ struct vm_area_struct;
 #define pgprot_noncached(prot)	(prot)
 
 /*
- * BAD_PAGETABLE is used when we need a bogus page-table, while
- * BAD_PAGE is used for a bogus page.
- *
  * ZERO_PAGE is a global shared page that is always zero:  used
  * for zero-mapped memory areas etc..
  */
-extern pte_t __bad_page(void);
-extern pmd_t * __bad_pagetable(void);
-
-extern unsigned long __zero_page(void);
-
-#define BAD_PAGETABLE	__bad_pagetable()
-#define BAD_PAGE	__bad_page()
 #define ZERO_PAGE(vaddr)	(virt_to_page(ZERO_PGE))
 
-/* number of bits that fit into a memory pointer */
-#define BITS_PER_PTR			(8*sizeof(unsigned long))
-
-/* to align the pointer to a pointer address */
-#define PTR_MASK			(~(sizeof(void*)-1))
-
-/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */
-#define SIZEOF_PTR_LOG2			3
-
-/* to find an entry in a page-table */
-#define PAGE_PTR(address)		\
-  ((unsigned long)(address)>>(PAGE_SHIFT-SIZEOF_PTR_LOG2)&PTR_MASK&~PAGE_MASK)
-
 /*
  * On certain platforms whose physical address space can overlap KSEG,
  * namely EV6 and above, we must re-twiddle the physaddr to restore the
@@ -186,16 +165,10 @@ extern unsigned long __zero_page(void);
  * and a page entry and page directory to the page they refer to.
  */
 #define page_to_pa(page)	(page_to_pfn(page) << PAGE_SHIFT)
-#define pte_pfn(pte)	(pte_val(pte) >> 32)
+#define PFN_PTE_SHIFT		32
+#define pte_pfn(pte)		(pte_val(pte) >> PFN_PTE_SHIFT)
 
 #define pte_page(pte)	pfn_to_page(pte_pfn(pte))
-#define mk_pte(page, pgprot)						\
-({									\
-	pte_t pte;							\
-									\
-	pte_val(pte) = (page_to_pfn(page) << 32) | pgprot_val(pgprot);	\
-	pte;								\
-})
 
 extern inline pte_t pfn_pte(unsigned long physpfn, pgprot_t pgprot)
 { pte_t pte; pte_val(pte) = (PHYS_TWIDDLE(physpfn) << 32) | pgprot_val(pgprot); return pte; }
@@ -253,7 +226,7 @@ extern inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED;
 extern inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) |= _PAGE_FOW; return pte; }
 extern inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~(__DIRTY_BITS); return pte; }
 extern inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~(__ACCESS_BITS); return pte; }
-extern inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) &= ~_PAGE_FOW; return pte; }
+extern inline pte_t pte_mkwrite_novma(pte_t pte){ pte_val(pte) &= ~_PAGE_FOW; return pte; }
 extern inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= __DIRTY_BITS; return pte; }
 extern inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= __ACCESS_BITS; return pte; }
 
@@ -300,20 +273,53 @@ extern inline void update_mmu_cache(struct vm_area_struct * vma,
 {
 }
 
+static inline void update_mmu_cache_range(struct vm_fault *vmf,
+		struct vm_area_struct *vma, unsigned long address,
+		pte_t *ptep, unsigned int nr)
+{
+}
+
 /*
- * Non-present pages:  high 24 bits are offset, next 8 bits type,
- * low 32 bits zero.
+ * Encode/decode swap entries and swap PTEs. Swap PTEs are all PTEs that
+ * are !pte_none() && !pte_present().
+ *
+ * Format of swap PTEs:
+ *
+ *   6 6 6 6 5 5 5 5 5 5 5 5 5 5 4 4 4 4 4 4 4 4 4 4 3 3 3 3 3 3 3 3
+ *   3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2
+ *   <------------------- offset ------------------> E <--- type -->
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <--------------------------- zeroes -------------------------->
+ *
+ *   E is the exclusive marker that is not stored in swap entries.
  */
 extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
-{ pte_t pte; pte_val(pte) = (type << 32) | (offset << 40); return pte; }
+{ pte_t pte; pte_val(pte) = ((type & 0x7f) << 32) | (offset << 40); return pte; }
 
-#define __swp_type(x)		(((x).val >> 32) & 0xff)
+#define __swp_type(x)		(((x).val >> 32) & 0x7f)
 #define __swp_offset(x)		((x).val >> 40)
 #define __swp_entry(type, off)	((swp_entry_t) { pte_val(mk_swap_pte((type), (off))) })
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 
-#define kern_addr_valid(addr)	(1)
+static inline bool pte_swp_exclusive(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
+}
+
+static inline pte_t pte_swp_mkexclusive(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_SWP_EXCLUSIVE;
+	return pte;
+}
+
+static inline pte_t pte_swp_clear_exclusive(pte_t pte)
+{
+	pte_val(pte) &= ~_PAGE_SWP_EXCLUSIVE;
+	return pte;
+}
 
 #define pte_ERROR(e) \
 	printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
@@ -324,7 +330,7 @@ extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
 
 extern void paging_init(void);
 
-/* We have our own get_unmapped_area to cope with ADDR_LIMIT_32BIT.  */
+/* We have our own get_unmapped_area */
 #define HAVE_ARCH_UNMAPPED_AREA
 
 #endif /* _ALPHA_PGTABLE_H */
diff --git a/arch/alpha/include/asm/processor.h b/arch/alpha/include/asm/processor.h
index 43e234c518b1..5dce5518a211 100644
--- a/arch/alpha/include/asm/processor.h
+++ b/arch/alpha/include/asm/processor.h
@@ -8,23 +8,19 @@
 #ifndef __ASM_ALPHA_PROCESSOR_H
 #define __ASM_ALPHA_PROCESSOR_H
 
-#include <linux/personality.h>	/* for ADDR_LIMIT_32BIT */
-
 /*
  * We have a 42-bit user address space: 4TB user VM...
  */
 #define TASK_SIZE (0x40000000000UL)
 
-#define STACK_TOP \
-  (current->personality & ADDR_LIMIT_32BIT ? 0x80000000 : 0x00120000000UL)
+#define STACK_TOP (0x00120000000UL)
 
 #define STACK_TOP_MAX	0x00120000000UL
 
 /* This decides where the kernel will search for a free chunk of vm
  * space during mmap's.
  */
-#define TASK_UNMAPPED_BASE \
-  ((current->personality & ADDR_LIMIT_32BIT) ? 0x40000000 : TASK_SIZE / 2)
+#define TASK_UNMAPPED_BASE (TASK_SIZE / 2)
 
 /* This is dead.  Everything has been moved to thread_info.  */
 struct thread_struct { };
@@ -36,8 +32,6 @@ extern void start_thread(struct pt_regs *, unsigned long, unsigned long);
 
 /* Free all resources held by a thread. */
 struct task_struct;
-extern void release_thread(struct task_struct *);
-
 unsigned long __get_wchan(struct task_struct *p);
 
 #define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc)
@@ -49,12 +43,6 @@ unsigned long __get_wchan(struct task_struct *p);
 
 #define ARCH_HAS_PREFETCH
 #define ARCH_HAS_PREFETCHW
-#define ARCH_HAS_SPINLOCK_PREFETCH
-
-#ifndef CONFIG_SMP
-/* Nothing to prefetch. */
-#define spin_lock_prefetch(lock)  	do { } while (0)
-#endif
 
 extern inline void prefetch(const void *ptr)  
 { 
@@ -66,11 +54,4 @@ extern inline void prefetchw(const void *ptr)
 	__builtin_prefetch(ptr, 1, 3);
 }
 
-#ifdef CONFIG_SMP
-extern inline void spin_lock_prefetch(const void *ptr)  
-{
-	__builtin_prefetch(ptr, 1, 3);
-}
-#endif
-
 #endif /* __ASM_ALPHA_PROCESSOR_H */
diff --git a/arch/alpha/include/asm/ptrace.h b/arch/alpha/include/asm/ptrace.h
index df5f317ab3fc..3557ce64ed21 100644
--- a/arch/alpha/include/asm/ptrace.h
+++ b/arch/alpha/include/asm/ptrace.h
@@ -16,7 +16,6 @@
 
 #define current_pt_regs() \
   ((struct pt_regs *) ((char *)current_thread_info() + 2*PAGE_SIZE) - 1)
-#define signal_pt_regs current_pt_regs
 
 #define force_successful_syscall_return() (current_pt_regs()->r0 = 0)
 
diff --git a/arch/alpha/include/asm/special_insns.h b/arch/alpha/include/asm/special_insns.h
index ca2c5c30b22e..798d0bdb11f9 100644
--- a/arch/alpha/include/asm/special_insns.h
+++ b/arch/alpha/include/asm/special_insns.h
@@ -15,10 +15,7 @@ enum implver_enum {
    (enum implver_enum) __implver; })
 #else
 /* Try to eliminate some dead code.  */
-#ifdef CONFIG_ALPHA_EV4
-#define implver() IMPLVER_EV4
-#endif
-#ifdef CONFIG_ALPHA_EV5
+#ifdef CONFIG_ALPHA_EV56
 #define implver() IMPLVER_EV5
 #endif
 #if defined(CONFIG_ALPHA_EV6)
diff --git a/arch/alpha/include/asm/spinlock_types.h b/arch/alpha/include/asm/spinlock_types.h
index 2526fd3be5fd..05a444d77c53 100644
--- a/arch/alpha/include/asm/spinlock_types.h
+++ b/arch/alpha/include/asm/spinlock_types.h
@@ -3,7 +3,7 @@
 #define _ALPHA_SPINLOCK_TYPES_H
 
 #ifndef __LINUX_SPINLOCK_TYPES_RAW_H
-# error "please don't include this file directly"
+# error "Please do not include this file directly."
 #endif
 
 typedef struct {
diff --git a/arch/alpha/include/asm/termios.h b/arch/alpha/include/asm/termios.h
deleted file mode 100644
index b7c77bb1bfd2..000000000000
--- a/arch/alpha/include/asm/termios.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ALPHA_TERMIOS_H
-#define _ALPHA_TERMIOS_H
-
-#include <uapi/asm/termios.h>
-
-/*	eof=^D		eol=\0		eol2=\0		erase=del
-	werase=^W	kill=^U		reprint=^R	sxtc=\0
-	intr=^C		quit=^\		susp=^Z		<OSF/1 VDSUSP>
-	start=^Q	stop=^S		lnext=^V	discard=^U
-	vmin=\1		vtime=\0
-*/
-#define INIT_C_CC "\004\000\000\177\027\025\022\000\003\034\032\000\021\023\026\025\001\000"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-
-#define user_termio_to_kernel_termios(a_termios, u_termio)			\
-({										\
-	struct ktermios *k_termios = (a_termios);				\
-	struct termio k_termio;							\
-	int canon, ret;								\
-										\
-	ret = copy_from_user(&k_termio, u_termio, sizeof(k_termio));		\
-	if (!ret) {								\
-		/* Overwrite only the low bits.  */				\
-		*(unsigned short *)&k_termios->c_iflag = k_termio.c_iflag;	\
-		*(unsigned short *)&k_termios->c_oflag = k_termio.c_oflag;	\
-		*(unsigned short *)&k_termios->c_cflag = k_termio.c_cflag;	\
-		*(unsigned short *)&k_termios->c_lflag = k_termio.c_lflag;	\
-		canon = k_termio.c_lflag & ICANON;				\
-										\
-		k_termios->c_cc[VINTR]  = k_termio.c_cc[_VINTR];		\
-		k_termios->c_cc[VQUIT]  = k_termio.c_cc[_VQUIT];		\
-		k_termios->c_cc[VERASE] = k_termio.c_cc[_VERASE];		\
-		k_termios->c_cc[VKILL]  = k_termio.c_cc[_VKILL];		\
-		k_termios->c_cc[VEOL2]  = k_termio.c_cc[_VEOL2];		\
-		k_termios->c_cc[VSWTC]  = k_termio.c_cc[_VSWTC];		\
-		k_termios->c_cc[canon ? VEOF : VMIN]  = k_termio.c_cc[_VEOF];	\
-		k_termios->c_cc[canon ? VEOL : VTIME] = k_termio.c_cc[_VEOL];	\
-	}									\
-	ret;									\
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- *
- * Note the "fun" _VMIN overloading.
- */
-#define kernel_termios_to_user_termio(u_termio, a_termios)		\
-({									\
-	struct ktermios *k_termios = (a_termios);			\
-	struct termio k_termio;						\
-	int canon;							\
-									\
-	k_termio.c_iflag = k_termios->c_iflag;				\
-	k_termio.c_oflag = k_termios->c_oflag;				\
-	k_termio.c_cflag = k_termios->c_cflag;				\
-	canon = (k_termio.c_lflag = k_termios->c_lflag) & ICANON;	\
-									\
-	k_termio.c_line = k_termios->c_line;				\
-	k_termio.c_cc[_VINTR]  = k_termios->c_cc[VINTR];		\
-	k_termio.c_cc[_VQUIT]  = k_termios->c_cc[VQUIT];		\
-	k_termio.c_cc[_VERASE] = k_termios->c_cc[VERASE];		\
-	k_termio.c_cc[_VKILL]  = k_termios->c_cc[VKILL];		\
-	k_termio.c_cc[_VEOF]   = k_termios->c_cc[canon ? VEOF : VMIN];	\
-	k_termio.c_cc[_VEOL]   = k_termios->c_cc[canon ? VEOL : VTIME];	\
-	k_termio.c_cc[_VEOL2]  = k_termios->c_cc[VEOL2];		\
-	k_termio.c_cc[_VSWTC]  = k_termios->c_cc[VSWTC];		\
-									\
-	copy_to_user(u_termio, &k_termio, sizeof(k_termio));		\
-})
-
-#define user_termios_to_kernel_termios(k, u) \
-	copy_from_user(k, u, sizeof(struct termios2))
-
-#define kernel_termios_to_user_termios(u, k) \
-	copy_to_user(u, k, sizeof(struct termios2))
-
-#define user_termios_to_kernel_termios_1(k, u) \
-	copy_from_user(k, u, sizeof(struct termios))
-
-#define kernel_termios_to_user_termios_1(u, k) \
-	copy_to_user(u, k, sizeof(struct termios))
-
-#endif	/* _ALPHA_TERMIOS_H */
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index fdc485d7787a..4a4d00b37986 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -26,6 +26,7 @@ struct thread_info {
 	int bpt_nsaved;
 	unsigned long bpt_addr[2];		/* breakpoint handling  */
 	unsigned int bpt_insn[2];
+	unsigned long fp[32];
 };
 
 /*
@@ -41,6 +42,8 @@ struct thread_info {
 register struct thread_info *__current_thread_info __asm__("$8");
 #define current_thread_info()  __current_thread_info
 
+register unsigned long *current_stack_pointer __asm__ ("$30");
+
 #endif /* __ASSEMBLY__ */
 
 /* Thread information allocation.  */
@@ -75,16 +78,15 @@ register struct thread_info *__current_thread_info __asm__("$8");
 
 /* Work to do on interrupt/exception return.  */
 #define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
-				 _TIF_NOTIFY_RESUME)
-
-/* Work to do on any return to userspace.  */
-#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
-				 | _TIF_SYSCALL_TRACE)
+				 _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL)
 
 #define TS_UAC_NOPRINT		0x0001	/* ! Preserve the following three */
 #define TS_UAC_NOFIX		0x0002	/* ! flags as they match          */
 #define TS_UAC_SIGBUS		0x0004	/* ! userspace part of 'osf_sysinfo' */
 
+#define TS_SAVED_FP		0x0008
+#define TS_RESTORE_FP		0x0010
+
 #define SET_UNALIGN_CTL(task,value)	({				\
 	__u32 status = task_thread_info(task)->status & ~UAC_BITMASK;	\
 	if (value & PR_UNALIGN_NOPRINT)					\
@@ -108,5 +110,17 @@ register struct thread_info *__current_thread_info __asm__("$8");
 	put_user(res, (int __user *)(value));				\
 	})
 
+#ifndef __ASSEMBLY__
+extern void __save_fpu(void);
+
+static inline void save_fpu(void)
+{
+	if (!(current_thread_info()->status & TS_SAVED_FP)) {
+		current_thread_info()->status |= TS_SAVED_FP;
+		__save_fpu();
+	}
+}
+#endif
+
 #endif /* __KERNEL__ */
 #endif /* _ALPHA_THREAD_INFO_H */
diff --git a/arch/alpha/include/asm/tlbflush.h b/arch/alpha/include/asm/tlbflush.h
index 94dc37cf873a..ba4b359d6c39 100644
--- a/arch/alpha/include/asm/tlbflush.h
+++ b/arch/alpha/include/asm/tlbflush.h
@@ -14,16 +14,6 @@
 extern void __load_new_mm_context(struct mm_struct *);
 
 
-/* Use a few helper functions to hide the ugly broken ASN
-   numbers on early Alphas (ev4 and ev45).  */
-
-__EXTERN_INLINE void
-ev4_flush_tlb_current(struct mm_struct *mm)
-{
-	__load_new_mm_context(mm);
-	tbiap();
-}
-
 __EXTERN_INLINE void
 ev5_flush_tlb_current(struct mm_struct *mm)
 {
@@ -35,19 +25,6 @@ ev5_flush_tlb_current(struct mm_struct *mm)
    specific icache page.  */
 
 __EXTERN_INLINE void
-ev4_flush_tlb_current_page(struct mm_struct * mm,
-			   struct vm_area_struct *vma,
-			   unsigned long addr)
-{
-	int tbi_flag = 2;
-	if (vma->vm_flags & VM_EXEC) {
-		__load_new_mm_context(mm);
-		tbi_flag = 3;
-	}
-	tbi(tbi_flag, addr);
-}
-
-__EXTERN_INLINE void
 ev5_flush_tlb_current_page(struct mm_struct * mm,
 			   struct vm_area_struct *vma,
 			   unsigned long addr)
@@ -59,18 +36,8 @@ ev5_flush_tlb_current_page(struct mm_struct * mm,
 }
 
 
-#ifdef CONFIG_ALPHA_GENERIC
-# define flush_tlb_current		alpha_mv.mv_flush_tlb_current
-# define flush_tlb_current_page		alpha_mv.mv_flush_tlb_current_page
-#else
-# ifdef CONFIG_ALPHA_EV4
-#  define flush_tlb_current		ev4_flush_tlb_current
-#  define flush_tlb_current_page	ev4_flush_tlb_current_page
-# else
-#  define flush_tlb_current		ev5_flush_tlb_current
-#  define flush_tlb_current_page	ev5_flush_tlb_current_page
-# endif
-#endif
+#define flush_tlb_current	ev5_flush_tlb_current
+#define flush_tlb_current_page	ev5_flush_tlb_current_page
 
 #ifdef __MMU_EXTERN_INLINE
 #undef __EXTERN_INLINE
diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h
index c32c2584c0b7..ef295cbb797c 100644
--- a/arch/alpha/include/asm/uaccess.h
+++ b/arch/alpha/include/asm/uaccess.h
@@ -96,9 +96,6 @@ struct __large_struct { unsigned long buf[100]; };
 		: "=r"(__gu_val), "=r"(__gu_err)	\
 		: "m"(__m(addr)), "1"(__gu_err))
 
-#ifdef __alpha_bwx__
-/* Those lucky bastards with ev56 and later CPUs can do byte/word moves.  */
-
 #define __get_user_16(addr)				\
 	__asm__("1: ldwu %0,%2\n"			\
 	"2:\n"						\
@@ -112,33 +109,6 @@ struct __large_struct { unsigned long buf[100]; };
 	EXC(1b,2b,%0,%1)				\
 		: "=r"(__gu_val), "=r"(__gu_err)	\
 		: "m"(__m(addr)), "1"(__gu_err))
-#else
-/* Unfortunately, we can't get an unaligned access trap for the sub-word
-   load, so we have to do a general unaligned operation.  */
-
-#define __get_user_16(addr)						\
-{									\
-	long __gu_tmp;							\
-	__asm__("1: ldq_u %0,0(%3)\n"					\
-	"2:	ldq_u %1,1(%3)\n"					\
-	"	extwl %0,%3,%0\n"					\
-	"	extwh %1,%3,%1\n"					\
-	"	or %0,%1,%0\n"						\
-	"3:\n"								\
-	EXC(1b,3b,%0,%2)						\
-	EXC(2b,3b,%0,%2)						\
-		: "=&r"(__gu_val), "=&r"(__gu_tmp), "=r"(__gu_err)	\
-		: "r"(addr), "2"(__gu_err));				\
-}
-
-#define __get_user_8(addr)						\
-	__asm__("1: ldq_u %0,0(%2)\n"					\
-	"	extbl %0,%2,%0\n"					\
-	"2:\n"								\
-	EXC(1b,2b,%0,%1)						\
-		: "=&r"(__gu_val), "=r"(__gu_err)			\
-		: "r"(addr), "1"(__gu_err))
-#endif
 
 extern void __put_user_unknown(void);
 
@@ -192,9 +162,6 @@ __asm__ __volatile__("1: stl %r2,%1\n"				\
 		: "=r"(__pu_err)				\
 		: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
 
-#ifdef __alpha_bwx__
-/* Those lucky bastards with ev56 and later CPUs can do byte/word moves.  */
-
 #define __put_user_16(x, addr)					\
 __asm__ __volatile__("1: stw %r2,%1\n"				\
 	"2:\n"							\
@@ -208,53 +175,6 @@ __asm__ __volatile__("1: stb %r2,%1\n"				\
 	EXC(1b,2b,$31,%0)					\
 		: "=r"(__pu_err)				\
 		: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
-#else
-/* Unfortunately, we can't get an unaligned access trap for the sub-word
-   write, so we have to do a general unaligned operation.  */
-
-#define __put_user_16(x, addr)					\
-{								\
-	long __pu_tmp1, __pu_tmp2, __pu_tmp3, __pu_tmp4;	\
-	__asm__ __volatile__(					\
-	"1:	ldq_u %2,1(%5)\n"				\
-	"2:	ldq_u %1,0(%5)\n"				\
-	"	inswh %6,%5,%4\n"				\
-	"	inswl %6,%5,%3\n"				\
-	"	mskwh %2,%5,%2\n"				\
-	"	mskwl %1,%5,%1\n"				\
-	"	or %2,%4,%2\n"					\
-	"	or %1,%3,%1\n"					\
-	"3:	stq_u %2,1(%5)\n"				\
-	"4:	stq_u %1,0(%5)\n"				\
-	"5:\n"							\
-	EXC(1b,5b,$31,%0)					\
-	EXC(2b,5b,$31,%0)					\
-	EXC(3b,5b,$31,%0)					\
-	EXC(4b,5b,$31,%0)					\
-		: "=r"(__pu_err), "=&r"(__pu_tmp1), 		\
-		  "=&r"(__pu_tmp2), "=&r"(__pu_tmp3), 		\
-		  "=&r"(__pu_tmp4)				\
-		: "r"(addr), "r"((unsigned long)(x)), "0"(__pu_err)); \
-}
-
-#define __put_user_8(x, addr)					\
-{								\
-	long __pu_tmp1, __pu_tmp2;				\
-	__asm__ __volatile__(					\
-	"1:	ldq_u %1,0(%4)\n"				\
-	"	insbl %3,%4,%2\n"				\
-	"	mskbl %1,%4,%1\n"				\
-	"	or %1,%2,%1\n"					\
-	"2:	stq_u %1,0(%4)\n"				\
-	"3:\n"							\
-	EXC(1b,3b,$31,%0)					\
-	EXC(2b,3b,$31,%0)					\
-		: "=r"(__pu_err), 				\
-	  	  "=&r"(__pu_tmp1), "=&r"(__pu_tmp2)		\
-		: "r"((unsigned long)(x)), "r"(addr), "0"(__pu_err)); \
-}
-#endif
-
 
 /*
  * Complex access routines
diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h
index 986f5da9b7d8..caabd92ea709 100644
--- a/arch/alpha/include/asm/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
@@ -4,7 +4,7 @@
 
 #include <uapi/asm/unistd.h>
 
-#define NR_SYSCALLS	__NR_syscalls
+#define NR_syscalls	__NR_syscalls
 
 #define __ARCH_WANT_NEW_STAT
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/alpha/include/asm/vga.h b/arch/alpha/include/asm/vga.h
index 4c347a8454c7..919931cb5b63 100644
--- a/arch/alpha/include/asm/vga.h
+++ b/arch/alpha/include/asm/vga.h
@@ -13,6 +13,7 @@
 #define VT_BUF_HAVE_RW
 #define VT_BUF_HAVE_MEMSETW
 #define VT_BUF_HAVE_MEMCPYW
+#define VT_BUF_HAVE_MEMMOVEW
 
 static inline void scr_writew(u16 val, volatile u16 *addr)
 {
@@ -40,6 +41,7 @@ static inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
 
 /* Do not trust that the usage will be correct; analyze the arguments.  */
 extern void scr_memcpyw(u16 *d, const u16 *s, unsigned int count);
+extern void scr_memmovew(u16 *d, const u16 *s, unsigned int count);
 
 /* ??? These are currently only used for downloading character sets.  As
    such, they don't need memory barriers.  Is this all they are intended
diff --git a/arch/alpha/include/asm/xchg.h b/arch/alpha/include/asm/xchg.h
deleted file mode 100644
index 7adb80c6746a..000000000000
--- a/arch/alpha/include/asm/xchg.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ALPHA_CMPXCHG_H
-#error Do not include xchg.h directly!
-#else
-/*
- * xchg/xchg_local and cmpxchg/cmpxchg_local share the same code
- * except that local version do not have the expensive memory barrier.
- * So this file is included twice from asm/cmpxchg.h.
- */
-
-/*
- * Atomic exchange.
- * Since it can be used to implement critical sections
- * it must clobber "memory" (also for interrupts in UP).
- */
-
-static inline unsigned long
-____xchg(_u8, volatile char *m, unsigned long val)
-{
-	unsigned long ret, tmp, addr64;
-
-	__asm__ __volatile__(
-	"	andnot	%4,7,%3\n"
-	"	insbl	%1,%4,%1\n"
-	"1:	ldq_l	%2,0(%3)\n"
-	"	extbl	%2,%4,%0\n"
-	"	mskbl	%2,%4,%2\n"
-	"	or	%1,%2,%2\n"
-	"	stq_c	%2,0(%3)\n"
-	"	beq	%2,2f\n"
-	".subsection 2\n"
-	"2:	br	1b\n"
-	".previous"
-	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
-	: "r" ((long)m), "1" (val) : "memory");
-
-	return ret;
-}
-
-static inline unsigned long
-____xchg(_u16, volatile short *m, unsigned long val)
-{
-	unsigned long ret, tmp, addr64;
-
-	__asm__ __volatile__(
-	"	andnot	%4,7,%3\n"
-	"	inswl	%1,%4,%1\n"
-	"1:	ldq_l	%2,0(%3)\n"
-	"	extwl	%2,%4,%0\n"
-	"	mskwl	%2,%4,%2\n"
-	"	or	%1,%2,%2\n"
-	"	stq_c	%2,0(%3)\n"
-	"	beq	%2,2f\n"
-	".subsection 2\n"
-	"2:	br	1b\n"
-	".previous"
-	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
-	: "r" ((long)m), "1" (val) : "memory");
-
-	return ret;
-}
-
-static inline unsigned long
-____xchg(_u32, volatile int *m, unsigned long val)
-{
-	unsigned long dummy;
-
-	__asm__ __volatile__(
-	"1:	ldl_l %0,%4\n"
-	"	bis $31,%3,%1\n"
-	"	stl_c %1,%2\n"
-	"	beq %1,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	: "=&r" (val), "=&r" (dummy), "=m" (*m)
-	: "rI" (val), "m" (*m) : "memory");
-
-	return val;
-}
-
-static inline unsigned long
-____xchg(_u64, volatile long *m, unsigned long val)
-{
-	unsigned long dummy;
-
-	__asm__ __volatile__(
-	"1:	ldq_l %0,%4\n"
-	"	bis $31,%3,%1\n"
-	"	stq_c %1,%2\n"
-	"	beq %1,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	: "=&r" (val), "=&r" (dummy), "=m" (*m)
-	: "rI" (val), "m" (*m) : "memory");
-
-	return val;
-}
-
-/* This function doesn't exist, so you'll get a linker error
-   if something tries to do an invalid xchg().  */
-extern void __xchg_called_with_bad_pointer(void);
-
-static __always_inline unsigned long
-____xchg(, volatile void *ptr, unsigned long x, int size)
-{
-	switch (size) {
-		case 1:
-			return ____xchg(_u8, ptr, x);
-		case 2:
-			return ____xchg(_u16, ptr, x);
-		case 4:
-			return ____xchg(_u32, ptr, x);
-		case 8:
-			return ____xchg(_u64, ptr, x);
-	}
-	__xchg_called_with_bad_pointer();
-	return x;
-}
-
-/*
- * Atomic compare and exchange.  Compare OLD with MEM, if identical,
- * store NEW in MEM.  Return the initial value in MEM.  Success is
- * indicated by comparing RETURN with OLD.
- */
-
-static inline unsigned long
-____cmpxchg(_u8, volatile char *m, unsigned char old, unsigned char new)
-{
-	unsigned long prev, tmp, cmp, addr64;
-
-	__asm__ __volatile__(
-	"	andnot	%5,7,%4\n"
-	"	insbl	%1,%5,%1\n"
-	"1:	ldq_l	%2,0(%4)\n"
-	"	extbl	%2,%5,%0\n"
-	"	cmpeq	%0,%6,%3\n"
-	"	beq	%3,2f\n"
-	"	mskbl	%2,%5,%2\n"
-	"	or	%1,%2,%2\n"
-	"	stq_c	%2,0(%4)\n"
-	"	beq	%2,3f\n"
-	"2:\n"
-	".subsection 2\n"
-	"3:	br	1b\n"
-	".previous"
-	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
-	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
-
-	return prev;
-}
-
-static inline unsigned long
-____cmpxchg(_u16, volatile short *m, unsigned short old, unsigned short new)
-{
-	unsigned long prev, tmp, cmp, addr64;
-
-	__asm__ __volatile__(
-	"	andnot	%5,7,%4\n"
-	"	inswl	%1,%5,%1\n"
-	"1:	ldq_l	%2,0(%4)\n"
-	"	extwl	%2,%5,%0\n"
-	"	cmpeq	%0,%6,%3\n"
-	"	beq	%3,2f\n"
-	"	mskwl	%2,%5,%2\n"
-	"	or	%1,%2,%2\n"
-	"	stq_c	%2,0(%4)\n"
-	"	beq	%2,3f\n"
-	"2:\n"
-	".subsection 2\n"
-	"3:	br	1b\n"
-	".previous"
-	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
-	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
-
-	return prev;
-}
-
-static inline unsigned long
-____cmpxchg(_u32, volatile int *m, int old, int new)
-{
-	unsigned long prev, cmp;
-
-	__asm__ __volatile__(
-	"1:	ldl_l %0,%5\n"
-	"	cmpeq %0,%3,%1\n"
-	"	beq %1,2f\n"
-	"	mov %4,%1\n"
-	"	stl_c %1,%2\n"
-	"	beq %1,3f\n"
-	"2:\n"
-	".subsection 2\n"
-	"3:	br 1b\n"
-	".previous"
-	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
-	: "r"((long) old), "r"(new), "m"(*m) : "memory");
-
-	return prev;
-}
-
-static inline unsigned long
-____cmpxchg(_u64, volatile long *m, unsigned long old, unsigned long new)
-{
-	unsigned long prev, cmp;
-
-	__asm__ __volatile__(
-	"1:	ldq_l %0,%5\n"
-	"	cmpeq %0,%3,%1\n"
-	"	beq %1,2f\n"
-	"	mov %4,%1\n"
-	"	stq_c %1,%2\n"
-	"	beq %1,3f\n"
-	"2:\n"
-	".subsection 2\n"
-	"3:	br 1b\n"
-	".previous"
-	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
-	: "r"((long) old), "r"(new), "m"(*m) : "memory");
-
-	return prev;
-}
-
-/* This function doesn't exist, so you'll get a linker error
-   if something tries to do an invalid cmpxchg().  */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-static __always_inline unsigned long
-____cmpxchg(, volatile void *ptr, unsigned long old, unsigned long new,
-	      int size)
-{
-	switch (size) {
-		case 1:
-			return ____cmpxchg(_u8, ptr, old, new);
-		case 2:
-			return ____cmpxchg(_u16, ptr, old, new);
-		case 4:
-			return ____cmpxchg(_u32, ptr, old, new);
-		case 8:
-			return ____cmpxchg(_u64, ptr, old, new);
-	}
-	__cmpxchg_called_with_bad_pointer();
-	return old;
-}
-
-#endif
diff --git a/arch/alpha/include/uapi/asm/compiler.h b/arch/alpha/include/uapi/asm/compiler.h
index 0e00c0e13374..8c03740966b4 100644
--- a/arch/alpha/include/uapi/asm/compiler.h
+++ b/arch/alpha/include/uapi/asm/compiler.h
@@ -95,24 +95,6 @@
 #define __kernel_ldwu(mem)	(mem)
 #define __kernel_stb(val,mem)	((mem) = (val))
 #define __kernel_stw(val,mem)	((mem) = (val))
-#else
-#define __kernel_ldbu(mem)				\
-  ({ unsigned char __kir;				\
-     __asm__(".arch ev56;				\
-	      ldbu %0,%1" : "=r"(__kir) : "m"(mem));	\
-     __kir; })
-#define __kernel_ldwu(mem)				\
-  ({ unsigned short __kir;				\
-     __asm__(".arch ev56;				\
-	      ldwu %0,%1" : "=r"(__kir) : "m"(mem));	\
-     __kir; })
-#define __kernel_stb(val,mem)				\
-  __asm__(".arch ev56;					\
-	   stb %1,%0" : "=m"(mem) : "r"(val))
-#define __kernel_stw(val,mem)				\
-  __asm__(".arch ev56;					\
-	   stw %1,%0" : "=m"(mem) : "r"(val))
 #endif
 
-
 #endif /* _UAPI__ALPHA_COMPILER_H */
diff --git a/arch/alpha/include/uapi/asm/mman.h b/arch/alpha/include/uapi/asm/mman.h
index 4aa996423b0d..1e700468a685 100644
--- a/arch/alpha/include/uapi/asm/mman.h
+++ b/arch/alpha/include/uapi/asm/mman.h
@@ -76,6 +76,11 @@
 
 #define MADV_DONTNEED_LOCKED	24	/* like DONTNEED, but drop locked pages too */
 
+#define MADV_COLLAPSE	25		/* Synchronous hugepage collapse */
+
+#define MADV_GUARD_INSTALL 102		/* fatal signal on access to range */
+#define MADV_GUARD_REMOVE 103		/* unguard range */
+
 /* compatibility flags */
 #define MAP_FILE	0
 
diff --git a/arch/alpha/include/uapi/asm/param.h b/arch/alpha/include/uapi/asm/param.h
index 49c7119934e2..e4e410f9bf85 100644
--- a/arch/alpha/include/uapi/asm/param.h
+++ b/arch/alpha/include/uapi/asm/param.h
@@ -2,14 +2,9 @@
 #ifndef _UAPI_ASM_ALPHA_PARAM_H
 #define _UAPI_ASM_ALPHA_PARAM_H
 
-#define HZ		1024
-
+#define __USER_HZ	1024
 #define EXEC_PAGESIZE	8192
 
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
+#include <asm-generic/param.h>
 
 #endif /* _UAPI_ASM_ALPHA_PARAM_H */
diff --git a/arch/alpha/include/uapi/asm/ptrace.h b/arch/alpha/include/uapi/asm/ptrace.h
index c29194181025..72ed913a910f 100644
--- a/arch/alpha/include/uapi/asm/ptrace.h
+++ b/arch/alpha/include/uapi/asm/ptrace.h
@@ -42,6 +42,8 @@ struct pt_regs {
 	unsigned long trap_a0;
 	unsigned long trap_a1;
 	unsigned long trap_a2;
+/* This makes the stack 16-byte aligned as GCC expects */
+	unsigned long __pad0;
 /* These are saved by PAL-code: */
 	unsigned long ps;
 	unsigned long pc;
@@ -64,7 +66,9 @@ struct switch_stack {
 	unsigned long r14;
 	unsigned long r15;
 	unsigned long r26;
+#ifndef __KERNEL__
 	unsigned long fp[32];	/* fp[31] is fpcr */
+#endif
 };
 
 
diff --git a/arch/alpha/include/uapi/asm/socket.h b/arch/alpha/include/uapi/asm/socket.h
index 739891b94136..5ef57f88df6b 100644
--- a/arch/alpha/include/uapi/asm/socket.h
+++ b/arch/alpha/include/uapi/asm/socket.h
@@ -137,6 +137,24 @@
 
 #define SO_RCVMARK		75
 
+#define SO_PASSPIDFD		76
+#define SO_PEERPIDFD		77
+
+#define SO_DEVMEM_LINEAR	78
+#define SCM_DEVMEM_LINEAR	SO_DEVMEM_LINEAR
+#define SO_DEVMEM_DMABUF	79
+#define SCM_DEVMEM_DMABUF	SO_DEVMEM_DMABUF
+#define SO_DEVMEM_DONTNEED	80
+
+#define SCM_TS_OPT_ID		81
+
+#define SO_RCVPRIORITY		82
+
+#define SO_PASSRIGHTS		83
+
+#define SO_INQ			84
+#define SCM_INQ			SO_INQ
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index 5a74581bf0ee..187cd8df2faf 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -3,13 +3,13 @@
 # Makefile for the linux kernel.
 #
 
-extra-y		:= head.o vmlinux.lds
+always-$(KBUILD_BUILTIN)	:= vmlinux.lds
 asflags-y	:= $(KBUILD_CFLAGS)
 ccflags-y	:= -Wno-sign-compare
 
-obj-y    := entry.o traps.o process.o osf_sys.o irq.o \
+obj-y    := head.o entry.o traps.o process.o osf_sys.o irq.o \
 	    irq_alpha.o signal.o setup.o ptrace.o time.o \
-	    systbls.o err_common.o io.o bugs.o
+	    systbls.o err_common.o io.o bugs.o termios.o
 
 obj-$(CONFIG_VGA_HOSE)	+= console.o
 obj-$(CONFIG_SMP)	+= smp.o
@@ -22,14 +22,14 @@ obj-$(CONFIG_AUDIT)	+= audit.o
 
 ifdef CONFIG_ALPHA_GENERIC
 
-obj-y 	 += core_apecs.o core_cia.o core_irongate.o core_lca.o \
+obj-y 	 += core_cia.o core_irongate.o \
 	    core_mcpcia.o core_polaris.o core_t2.o \
 	    core_tsunami.o
 
-obj-y	 += sys_alcor.o sys_cabriolet.o sys_dp264.o sys_eb64p.o sys_eiger.o \
-	    sys_jensen.o sys_miata.o sys_mikasa.o sys_nautilus.o \
+obj-y	 += sys_alcor.o sys_cabriolet.o sys_dp264.o sys_eiger.o \
+	    sys_miata.o sys_mikasa.o sys_nautilus.o \
 	    sys_noritake.o sys_rawhide.o sys_ruffian.o sys_rx164.o \
-	    sys_sable.o sys_sio.o sys_sx164.o sys_takara.o
+	    sys_sable.o sys_sx164.o sys_takara.o
 
 ifndef CONFIG_ALPHA_LEGACY_START_ADDRESS
 obj-y	 += core_marvel.o core_titan.o core_wildfire.o
@@ -47,15 +47,9 @@ else
 # Misc support
 obj-$(CONFIG_ALPHA_SRM)		+= srmcons.o
 
-ifdef CONFIG_BINFMT_AOUT
-obj-y	+= binfmt_loader.o
-endif
-
 # Core logic support
-obj-$(CONFIG_ALPHA_APECS)	+= core_apecs.o
 obj-$(CONFIG_ALPHA_CIA)		+= core_cia.o
 obj-$(CONFIG_ALPHA_IRONGATE)	+= core_irongate.o
-obj-$(CONFIG_ALPHA_LCA)		+= core_lca.o
 obj-$(CONFIG_ALPHA_MARVEL)	+= core_marvel.o gct.o
 obj-$(CONFIG_ALPHA_MCPCIA)	+= core_mcpcia.o
 obj-$(CONFIG_ALPHA_POLARIS)	+= core_polaris.o
@@ -66,12 +60,6 @@ obj-$(CONFIG_ALPHA_WILDFIRE)	+= core_wildfire.o
 
 # Board support
 obj-$(CONFIG_ALPHA_ALCOR)	+= sys_alcor.o irq_i8259.o irq_srm.o
-obj-$(CONFIG_ALPHA_CABRIOLET)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   pc873xx.o
-obj-$(CONFIG_ALPHA_EB164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   pc873xx.o
-obj-$(CONFIG_ALPHA_EB66P)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   pc873xx.o
 obj-$(CONFIG_ALPHA_LX164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
 				   smc37c93x.o
 obj-$(CONFIG_ALPHA_PC164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
@@ -79,10 +67,7 @@ obj-$(CONFIG_ALPHA_PC164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
 obj-$(CONFIG_ALPHA_DP264)	+= sys_dp264.o irq_i8259.o es1888.o smc37c669.o
 obj-$(CONFIG_ALPHA_SHARK)	+= sys_dp264.o irq_i8259.o es1888.o smc37c669.o
 obj-$(CONFIG_ALPHA_TITAN)	+= sys_titan.o irq_i8259.o smc37c669.o
-obj-$(CONFIG_ALPHA_EB64P)	+= sys_eb64p.o irq_i8259.o
-obj-$(CONFIG_ALPHA_EB66)	+= sys_eb64p.o irq_i8259.o
 obj-$(CONFIG_ALPHA_EIGER)	+= sys_eiger.o irq_i8259.o
-obj-$(CONFIG_ALPHA_JENSEN)	+= sys_jensen.o pci-noop.o irq_i8259.o
 obj-$(CONFIG_ALPHA_MARVEL)	+= sys_marvel.o 
 obj-$(CONFIG_ALPHA_MIATA)	+= sys_miata.o irq_pyxis.o irq_i8259.o \
 				   es1888.o smc37c669.o
@@ -93,12 +78,6 @@ obj-$(CONFIG_ALPHA_RAWHIDE)	+= sys_rawhide.o irq_i8259.o
 obj-$(CONFIG_ALPHA_RUFFIAN)	+= sys_ruffian.o irq_pyxis.o irq_i8259.o
 obj-$(CONFIG_ALPHA_RX164)	+= sys_rx164.o irq_i8259.o
 obj-$(CONFIG_ALPHA_SABLE)	+= sys_sable.o
-obj-$(CONFIG_ALPHA_LYNX)	+= sys_sable.o
-obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
 obj-$(CONFIG_ALPHA_SX164)	+= sys_sx164.o irq_pyxis.o irq_i8259.o \
 				   irq_srm.o smc37c669.o
 obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o pc873xx.o
diff --git a/arch/alpha/kernel/asm-offsets.c b/arch/alpha/kernel/asm-offsets.c
index 2e125e5c1508..1ebb05890499 100644
--- a/arch/alpha/kernel/asm-offsets.c
+++ b/arch/alpha/kernel/asm-offsets.c
@@ -4,39 +4,27 @@
  * This code generates raw asm output which is post-processed to extract
  * and format the required data.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <linux/sched.h>
 #include <linux/ptrace.h>
 #include <linux/kbuild.h>
-#include <asm/io.h>
+#include <asm/machvec.h>
 
-void foo(void)
+static void __used foo(void)
 {
-	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
-	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
+	DEFINE(TI_FP, offsetof(struct thread_info, fp));
+	DEFINE(TI_STATUS, offsetof(struct thread_info, status));
 	BLANK();
 
-        DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
-        DEFINE(TASK_CRED, offsetof(struct task_struct, cred));
-        DEFINE(TASK_REAL_PARENT, offsetof(struct task_struct, real_parent));
-        DEFINE(TASK_GROUP_LEADER, offsetof(struct task_struct, group_leader));
-        DEFINE(TASK_TGID, offsetof(struct task_struct, tgid));
-        BLANK();
-
-        DEFINE(CRED_UID,  offsetof(struct cred, uid));
-        DEFINE(CRED_EUID, offsetof(struct cred, euid));
-        DEFINE(CRED_GID,  offsetof(struct cred, gid));
-        DEFINE(CRED_EGID, offsetof(struct cred, egid));
-        BLANK();
-
+	DEFINE(SP_OFF, offsetof(struct pt_regs, ps));
 	DEFINE(SIZEOF_PT_REGS, sizeof(struct pt_regs));
-	DEFINE(PT_PTRACED, PT_PTRACED);
-	DEFINE(CLONE_VM, CLONE_VM);
-	DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
-	DEFINE(SIGCHLD, SIGCHLD);
+	BLANK();
+
+	DEFINE(SWITCH_STACK_SIZE, sizeof(struct switch_stack));
 	BLANK();
 
 	DEFINE(HAE_CACHE, offsetof(struct alpha_machine_vector, hae_cache));
diff --git a/arch/alpha/kernel/binfmt_loader.c b/arch/alpha/kernel/binfmt_loader.c
deleted file mode 100644
index e4be7a543ecf..000000000000
--- a/arch/alpha/kernel/binfmt_loader.c
+++ /dev/null
@@ -1,46 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/mm_types.h>
-#include <linux/binfmts.h>
-#include <linux/a.out.h>
-
-static int load_binary(struct linux_binprm *bprm)
-{
-	struct exec *eh = (struct exec *)bprm->buf;
-	unsigned long loader;
-	struct file *file;
-	int retval;
-
-	if (eh->fh.f_magic != 0x183 || (eh->fh.f_flags & 0x3000) != 0x3000)
-		return -ENOEXEC;
-
-	if (bprm->loader)
-		return -ENOEXEC;
-
-	loader = bprm->vma->vm_end - sizeof(void *);
-
-	file = open_exec("/sbin/loader");
-	retval = PTR_ERR(file);
-	if (IS_ERR(file))
-		return retval;
-
-	/* Remember if the application is TASO.  */
-	bprm->taso = eh->ah.entry < 0x100000000UL;
-
-	bprm->interpreter = file;
-	bprm->loader = loader;
-	return 0;
-}
-
-static struct linux_binfmt loader_format = {
-	.load_binary	= load_binary,
-};
-
-static int __init init_loader_binfmt(void)
-{
-	insert_binfmt(&loader_format);
-	return 0;
-}
-arch_initcall(init_loader_binfmt);
diff --git a/arch/alpha/kernel/bugs.c b/arch/alpha/kernel/bugs.c
index 08cc10d7fa17..e8c51089325f 100644
--- a/arch/alpha/kernel/bugs.c
+++ b/arch/alpha/kernel/bugs.c
@@ -1,6 +1,7 @@
 
 #include <asm/hwrpb.h>
 #include <linux/device.h>
+#include <linux/cpu.h>
 
 
 #ifdef CONFIG_SYSFS
diff --git a/arch/alpha/kernel/console.c b/arch/alpha/kernel/console.c
index 5476279329a6..4193f76e9633 100644
--- a/arch/alpha/kernel/console.c
+++ b/arch/alpha/kernel/console.c
@@ -15,6 +15,7 @@
 #include <asm/machvec.h>
 
 #include "pci_impl.h"
+#include "proto.h"
 
 #ifdef CONFIG_VGA_HOSE
 
diff --git a/arch/alpha/kernel/core_apecs.c b/arch/alpha/kernel/core_apecs.c
deleted file mode 100644
index 6df765ff2b10..000000000000
--- a/arch/alpha/kernel/core_apecs.c
+++ /dev/null
@@ -1,420 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/core_apecs.c
- *
- * Rewritten for Apecs from the lca.c from:
- *
- * Written by David Mosberger (davidm@cs.arizona.edu) with some code
- * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
- * bios code.
- *
- * Code common to all APECS core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-#include <asm/smp.h>
-#include <asm/mce.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-/*
- * NOTE: Herein lie back-to-back mb instructions.  They are magic. 
- * One plausible explanation is that the i/o controller does not properly
- * handle the system transaction.  Another involves timing.  Ho hum.
- */
-
-/*
- * BIOS32-style PCI interface:
- */
-
-#define DEBUG_CONFIG 0
-
-#if DEBUG_CONFIG
-# define DBGC(args)	printk args
-#else
-# define DBGC(args)
-#endif
-
-#define vuip	volatile unsigned int  *
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address and setup the APECS_HAXR2 register
- * accordingly.  It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Type 0:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:11	Device select bit.
- * 	10:8	Function number
- * 	 7:2	Register number
- *
- * Type 1:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:24	reserved
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *  
- * Notes:
- *	The function number selects which function of a multi-function device 
- *	(e.g., SCSI and Ethernet).
- * 
- *	The register selects a DWORD (32 bit) register offset.  Hence it
- *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
- *	bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
-	     unsigned long *pci_addr, unsigned char *type1)
-{
-	unsigned long addr;
-	u8 bus = pbus->number;
-
-	DBGC(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
-	      " pci_addr=0x%p, type1=0x%p)\n",
-	      bus, device_fn, where, pci_addr, type1));
-
-	if (bus == 0) {
-		int device = device_fn >> 3;
-
-		/* type 0 configuration cycle: */
-
-		if (device > 20) {
-			DBGC(("mk_conf_addr: device (%d) > 20, returning -1\n",
-			      device));
-			return -1;
-		}
-
-		*type1 = 0;
-		addr = (device_fn << 8) | (where);
-	} else {
-		/* type 1 configuration cycle: */
-		*type1 = 1;
-		addr = (bus << 16) | (device_fn << 8) | (where);
-	}
-	*pci_addr = addr;
-	DBGC(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
-	return 0;
-}
-
-static unsigned int
-conf_read(unsigned long addr, unsigned char type1)
-{
-	unsigned long flags;
-	unsigned int stat0, value;
-	unsigned int haxr2 = 0;
-
-	local_irq_save(flags);	/* avoid getting hit by machine check */
-
-	DBGC(("conf_read(addr=0x%lx, type1=%d)\n", addr, type1));
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-	*(vuip)APECS_IOC_DCSR = stat0;
-	mb();
-	DBGC(("conf_read: APECS DCSR was 0x%x\n", stat0));
-
-	/* If Type1 access, must set HAE #2. */
-	if (type1) {
-		haxr2 = *(vuip)APECS_IOC_HAXR2;
-		mb();
-		*(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
-		DBGC(("conf_read: TYPE1 access\n"));
-	}
-
-	draina();
-	mcheck_expected(0) = 1;
-	mcheck_taken(0) = 0;
-	mb();
-
-	/* Access configuration space.  */
-
-	/* Some SRMs step on these registers during a machine check.  */
-	asm volatile("ldl %0,%1; mb; mb" : "=r"(value) : "m"(*(vuip)addr)
-		     : "$9", "$10", "$11", "$12", "$13", "$14", "memory");
-
-	if (mcheck_taken(0)) {
-		mcheck_taken(0) = 0;
-		value = 0xffffffffU;
-		mb();
-	}
-	mcheck_expected(0) = 0;
-	mb();
-
-#if 1
-	/*
-	 * david.rusling@reo.mts.dec.com.  This code is needed for the
-	 * EB64+ as it does not generate a machine check (why I don't
-	 * know).  When we build kernels for one particular platform
-	 * then we can make this conditional on the type.
-	 */
-	draina();
-
-	/* Now look for any errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-	DBGC(("conf_read: APECS DCSR after read 0x%x\n", stat0));
-
-	/* Is any error bit set? */
-	if (stat0 & 0xffe0U) {
-		/* If not NDEV, print status.  */
-		if (!(stat0 & 0x0800)) {
-			printk("apecs.c:conf_read: got stat0=%x\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vuip)APECS_IOC_DCSR = stat0;
-		mb();
-		wrmces(0x7);			/* reset machine check */
-		value = 0xffffffff;
-	}
-#endif
-
-	/* If Type1 access, must reset HAE #2 so normal IO space ops work.  */
-	if (type1) {
-		*(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
-		mb();
-	}
-	local_irq_restore(flags);
-
-	return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value, unsigned char type1)
-{
-	unsigned long flags;
-	unsigned int stat0;
-	unsigned int haxr2 = 0;
-
-	local_irq_save(flags);	/* avoid getting hit by machine check */
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-	*(vuip)APECS_IOC_DCSR = stat0;
-	mb();
-
-	/* If Type1 access, must set HAE #2. */
-	if (type1) {
-		haxr2 = *(vuip)APECS_IOC_HAXR2;
-		mb();
-		*(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
-	}
-
-	draina();
-	mcheck_expected(0) = 1;
-	mb();
-
-	/* Access configuration space.  */
-	*(vuip)addr = value;
-	mb();
-	mb();  /* magic */
-	mcheck_expected(0) = 0;
-	mb();
-
-#if 1
-	/*
-	 * david.rusling@reo.mts.dec.com.  This code is needed for the
-	 * EB64+ as it does not generate a machine check (why I don't
-	 * know).  When we build kernels for one particular platform
-	 * then we can make this conditional on the type.
-	 */
-	draina();
-
-	/* Now look for any errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-
-	/* Is any error bit set? */
-	if (stat0 & 0xffe0U) {
-		/* If not NDEV, print status.  */
-		if (!(stat0 & 0x0800)) {
-			printk("apecs.c:conf_write: got stat0=%x\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vuip)APECS_IOC_DCSR = stat0;
-		mb();
-		wrmces(0x7);			/* reset machine check */
-	}
-#endif
-
-	/* If Type1 access, must reset HAE #2 so normal IO space ops work.  */
-	if (type1) {
-		*(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
-		mb();
-	}
-	local_irq_restore(flags);
-}
-
-static int
-apecs_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		  int size, u32 *value)
-{
-	unsigned long addr, pci_addr;
-	unsigned char type1;
-	long mask;
-	int shift;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	shift = (where & 3) * 8;
-	addr = (pci_addr << 5) + mask + APECS_CONF;
-	*value = conf_read(addr, type1) >> (shift);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-apecs_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		   int size, u32 value)
-{
-	unsigned long addr, pci_addr;
-	unsigned char type1;
-	long mask;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	addr = (pci_addr << 5) + mask + APECS_CONF;
-	conf_write(addr, value << ((where & 3) * 8), type1);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops apecs_pci_ops = 
-{
-	.read =		apecs_read_config,
-	.write =	apecs_write_config,
-};
-
-void
-apecs_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
-	wmb();
-	*(vip)APECS_IOC_TBIA = 0;
-	mb();
-}
-
-void __init
-apecs_init_arch(void)
-{
-	struct pci_controller *hose;
-
-	/*
-	 * Create our single hose.
-	 */
-
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
-	hose->index = 0;
-
-	hose->sparse_mem_base = APECS_SPARSE_MEM - IDENT_ADDR;
-	hose->dense_mem_base = APECS_DENSE_MEM - IDENT_ADDR;
-	hose->sparse_io_base = APECS_IO - IDENT_ADDR;
-	hose->dense_io_base = 0;
-
-	/*
-	 * Set up the PCI to main memory translation windows.
-	 *
-	 * Window 1 is direct access 1GB at 1GB
-	 * Window 2 is scatter-gather 8MB at 8MB (for isa)
-	 */
-	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
-				       SMP_CACHE_BYTES);
-	hose->sg_pci = NULL;
-	__direct_map_base = 0x40000000;
-	__direct_map_size = 0x40000000;
-
-	*(vuip)APECS_IOC_PB1R = __direct_map_base | 0x00080000;
-	*(vuip)APECS_IOC_PM1R = (__direct_map_size - 1) & 0xfff00000U;
-	*(vuip)APECS_IOC_TB1R = 0;
-
-	*(vuip)APECS_IOC_PB2R = hose->sg_isa->dma_base | 0x000c0000;
-	*(vuip)APECS_IOC_PM2R = (hose->sg_isa->size - 1) & 0xfff00000;
-	*(vuip)APECS_IOC_TB2R = virt_to_phys(hose->sg_isa->ptes) >> 1;
-
-	apecs_pci_tbi(hose, 0, -1);
-
-	/*
-	 * Finally, clear the HAXR2 register, which gets used
-	 * for PCI Config Space accesses. That is the way
-	 * we want to use it, and we do not want to depend on
-	 * what ARC or SRM might have left behind...
-	 */
-	*(vuip)APECS_IOC_HAXR2 = 0;
-	mb();
-}
-
-void
-apecs_pci_clr_err(void)
-{
-	unsigned int jd;
-
-	jd = *(vuip)APECS_IOC_DCSR;
-	if (jd & 0xffe0L) {
-		*(vuip)APECS_IOC_SEAR;
-		*(vuip)APECS_IOC_DCSR = jd | 0xffe1L;
-		mb();
-		*(vuip)APECS_IOC_DCSR;
-	}
-	*(vuip)APECS_IOC_TBIA = (unsigned int)APECS_IOC_TBIA;
-	mb();
-	*(vuip)APECS_IOC_TBIA;
-}
-
-void
-apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	struct el_common *mchk_header;
-	struct el_apecs_procdata *mchk_procdata;
-	struct el_apecs_sysdata_mcheck *mchk_sysdata;
-
-	mchk_header = (struct el_common *)la_ptr;
-
-	mchk_procdata = (struct el_apecs_procdata *)
-		(la_ptr + mchk_header->proc_offset
-		 - sizeof(mchk_procdata->paltemp));
-
-	mchk_sysdata = (struct el_apecs_sysdata_mcheck *)
-		(la_ptr + mchk_header->sys_offset);
-
-
-	/* Clear the error before any reporting.  */
-	mb();
-	mb(); /* magic */
-	draina();
-	apecs_pci_clr_err();
-	wrmces(0x7);		/* reset machine check pending flag */
-	mb();
-
-	process_mcheck_info(vector, la_ptr, "APECS",
-			    (mcheck_expected(0)
-			     && (mchk_sysdata->epic_dcsr & 0x0c00UL)));
-}
diff --git a/arch/alpha/kernel/core_cia.c b/arch/alpha/kernel/core_cia.c
index f489170201c3..6e577228e175 100644
--- a/arch/alpha/kernel/core_cia.c
+++ b/arch/alpha/kernel/core_cia.c
@@ -280,7 +280,7 @@ cia_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
 #define CIA_BROKEN_TBIA_SIZE	1024
 
 /* Always called with interrupts disabled */
-void
+static void
 cia_pci_tbi_try2(struct pci_controller *hose,
 		 dma_addr_t start, dma_addr_t end)
 {
@@ -331,10 +331,7 @@ cia_prepare_tbia_workaround(int window)
 	long i;
 
 	/* Use minimal 1K map. */
-	ppte = memblock_alloc(CIA_BROKEN_TBIA_SIZE, 32768);
-	if (!ppte)
-		panic("%s: Failed to allocate %u bytes align=0x%x\n",
-		      __func__, CIA_BROKEN_TBIA_SIZE, 32768);
+	ppte = memblock_alloc_or_panic(CIA_BROKEN_TBIA_SIZE, 32768);
 	pte = (virt_to_phys(ppte) >> (PAGE_SHIFT - 1)) | 1;
 
 	for (i = 0; i < CIA_BROKEN_TBIA_SIZE / sizeof(unsigned long); ++i)
@@ -527,7 +524,7 @@ verify_tb_operation(void)
 	if (use_tbia_try2) {
 		alpha_mv.mv_pci_tbi = cia_pci_tbi_try2;
 
-		/* Tags 0-3 must be disabled if we use this workaraund. */
+		/* Tags 0-3 must be disabled if we use this workaround. */
 		wmb();
 		*(vip)CIA_IOC_TB_TAGn(0) = 2;
 		*(vip)CIA_IOC_TB_TAGn(1) = 2;
@@ -576,7 +573,7 @@ struct
     } window[4];
 } saved_config __attribute((common));
 
-void
+static void
 cia_save_srm_settings(int is_pyxis)
 {
 	int i;
@@ -602,7 +599,7 @@ cia_save_srm_settings(int is_pyxis)
 	mb();
 }
 
-void
+static void
 cia_restore_srm_settings(void)
 {
 	int i;
diff --git a/arch/alpha/kernel/core_irongate.c b/arch/alpha/kernel/core_irongate.c
index 6b8ed12936b6..05dc4c1b9074 100644
--- a/arch/alpha/kernel/core_irongate.c
+++ b/arch/alpha/kernel/core_irongate.c
@@ -226,7 +226,6 @@ albacore_init_arch(void)
 	if (memtop > pci_mem) {
 #ifdef CONFIG_BLK_DEV_INITRD
 		extern unsigned long initrd_start, initrd_end;
-		extern void *move_initrd(unsigned long);
 
 		/* Move the initrd out of the way. */
 		if (initrd_end && __pa(initrd_end) > pci_mem) {
diff --git a/arch/alpha/kernel/core_lca.c b/arch/alpha/kernel/core_lca.c
deleted file mode 100644
index 57e0750419f2..000000000000
--- a/arch/alpha/kernel/core_lca.c
+++ /dev/null
@@ -1,517 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/core_lca.c
- *
- * Written by David Mosberger (davidm@cs.arizona.edu) with some code
- * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
- * bios code.
- *
- * Code common to all LCA core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_lca.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-
-#include <asm/ptrace.h>
-#include <asm/irq_regs.h>
-#include <asm/smp.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-
-/*
- * BIOS32-style PCI interface:
- */
-
-/*
- * Machine check reasons.  Defined according to PALcode sources
- * (osf.h and platform.h).
- */
-#define MCHK_K_TPERR		0x0080
-#define MCHK_K_TCPERR		0x0082
-#define MCHK_K_HERR		0x0084
-#define MCHK_K_ECC_C		0x0086
-#define MCHK_K_ECC_NC		0x0088
-#define MCHK_K_UNKNOWN		0x008A
-#define MCHK_K_CACKSOFT		0x008C
-#define MCHK_K_BUGCHECK		0x008E
-#define MCHK_K_OS_BUGCHECK	0x0090
-#define MCHK_K_DCPERR		0x0092
-#define MCHK_K_ICPERR		0x0094
-
-
-/*
- * Platform-specific machine-check reasons:
- */
-#define MCHK_K_SIO_SERR		0x204	/* all platforms so far */
-#define MCHK_K_SIO_IOCHK	0x206	/* all platforms so far */
-#define MCHK_K_DCSR		0x208	/* all but Noname */
-
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address and setup the LCA_IOC_CONF register
- * accordingly.  It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Type 0:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:11	Device select bit.
- * 	10:8	Function number
- * 	 7:2	Register number
- *
- * Type 1:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:24	reserved
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *  
- * Notes:
- *	The function number selects which function of a multi-function device 
- *	(e.g., SCSI and Ethernet).
- * 
- *	The register selects a DWORD (32 bit) register offset.  Hence it
- *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
- *	bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
-	     unsigned long *pci_addr)
-{
-	unsigned long addr;
-	u8 bus = pbus->number;
-
-	if (bus == 0) {
-		int device = device_fn >> 3;
-		int func = device_fn & 0x7;
-
-		/* Type 0 configuration cycle.  */
-
-		if (device > 12) {
-			return -1;
-		}
-
-		*(vulp)LCA_IOC_CONF = 0;
-		addr = (1 << (11 + device)) | (func << 8) | where;
-	} else {
-		/* Type 1 configuration cycle.  */
-		*(vulp)LCA_IOC_CONF = 1;
-		addr = (bus << 16) | (device_fn << 8) | where;
-	}
-	*pci_addr = addr;
-	return 0;
-}
-
-static unsigned int
-conf_read(unsigned long addr)
-{
-	unsigned long flags, code, stat0;
-	unsigned int value;
-
-	local_irq_save(flags);
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	*(vulp)LCA_IOC_STAT0 = stat0;
-	mb();
-
-	/* Access configuration space.  */
-	value = *(vuip)addr;
-	draina();
-
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	if (stat0 & LCA_IOC_STAT0_ERR) {
-		code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
-			& LCA_IOC_STAT0_CODE_MASK);
-		if (code != 1) {
-			printk("lca.c:conf_read: got stat0=%lx\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vulp)LCA_IOC_STAT0 = stat0;
-		mb();
-
-		/* Reset machine check.  */
-		wrmces(0x7);
-
-		value = 0xffffffff;
-	}
-	local_irq_restore(flags);
-	return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value)
-{
-	unsigned long flags, code, stat0;
-
-	local_irq_save(flags);	/* avoid getting hit by machine check */
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	*(vulp)LCA_IOC_STAT0 = stat0;
-	mb();
-
-	/* Access configuration space.  */
-	*(vuip)addr = value;
-	draina();
-
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	if (stat0 & LCA_IOC_STAT0_ERR) {
-		code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
-			& LCA_IOC_STAT0_CODE_MASK);
-		if (code != 1) {
-			printk("lca.c:conf_write: got stat0=%lx\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vulp)LCA_IOC_STAT0 = stat0;
-		mb();
-
-		/* Reset machine check. */
-		wrmces(0x7);
-	}
-	local_irq_restore(flags);
-}
-
-static int
-lca_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 *value)
-{
-	unsigned long addr, pci_addr;
-	long mask;
-	int shift;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	shift = (where & 3) * 8;
-	mask = (size - 1) * 8;
-	addr = (pci_addr << 5) + mask + LCA_CONF;
-	*value = conf_read(addr) >> (shift);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int 
-lca_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
-		 u32 value)
-{
-	unsigned long addr, pci_addr;
-	long mask;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	addr = (pci_addr << 5) + mask + LCA_CONF;
-	conf_write(addr, value << ((where & 3) * 8));
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops lca_pci_ops = 
-{
-	.read =		lca_read_config,
-	.write =	lca_write_config,
-};
-
-void
-lca_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
-	wmb();
-	*(vulp)LCA_IOC_TBIA = 0;
-	mb();
-}
-
-void __init
-lca_init_arch(void)
-{
-	struct pci_controller *hose;
-
-	/*
-	 * Create our single hose.
-	 */
-
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
-	hose->index = 0;
-
-	hose->sparse_mem_base = LCA_SPARSE_MEM - IDENT_ADDR;
-	hose->dense_mem_base = LCA_DENSE_MEM - IDENT_ADDR;
-	hose->sparse_io_base = LCA_IO - IDENT_ADDR;
-	hose->dense_io_base = 0;
-
-	/*
-	 * Set up the PCI to main memory translation windows.
-	 *
-	 * Mimic the SRM settings for the direct-map window.
-	 *   Window 0 is scatter-gather 8MB at 8MB (for isa).
-	 *   Window 1 is direct access 1GB at 1GB.
-	 *
-	 * Note that we do not try to save any of the DMA window CSRs
-	 * before setting them, since we cannot read those CSRs on LCA.
-	 */
-	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
-				       SMP_CACHE_BYTES);
-	hose->sg_pci = NULL;
-	__direct_map_base = 0x40000000;
-	__direct_map_size = 0x40000000;
-
-	*(vulp)LCA_IOC_W_BASE0 = hose->sg_isa->dma_base | (3UL << 32);
-	*(vulp)LCA_IOC_W_MASK0 = (hose->sg_isa->size - 1) & 0xfff00000;
-	*(vulp)LCA_IOC_T_BASE0 = virt_to_phys(hose->sg_isa->ptes);
-
-	*(vulp)LCA_IOC_W_BASE1 = __direct_map_base | (2UL << 32);
-	*(vulp)LCA_IOC_W_MASK1 = (__direct_map_size - 1) & 0xfff00000;
-	*(vulp)LCA_IOC_T_BASE1 = 0;
-
-	*(vulp)LCA_IOC_TB_ENA = 0x80;
-
-	lca_pci_tbi(hose, 0, -1);
-
-	/*
-	 * Disable PCI parity for now.  The NCR53c810 chip has
-	 * troubles meeting the PCI spec which results in
-	 * data parity errors.
-	 */
-	*(vulp)LCA_IOC_PAR_DIS = 1UL<<5;
-
-	/*
-	 * Finally, set up for restoring the correct HAE if using SRM.
-	 * Again, since we cannot read many of the CSRs on the LCA,
-	 * one of which happens to be the HAE, we save the value that
-	 * the SRM will expect...
-	 */
-	if (alpha_using_srm)
-		srm_hae = 0x80000000UL;
-}
-
-/*
- * Constants used during machine-check handling.  I suppose these
- * could be moved into lca.h but I don't see much reason why anybody
- * else would want to use them.
- */
-
-#define ESR_EAV		(1UL<< 0)	/* error address valid */
-#define ESR_CEE		(1UL<< 1)	/* correctable error */
-#define ESR_UEE		(1UL<< 2)	/* uncorrectable error */
-#define ESR_WRE		(1UL<< 3)	/* write-error */
-#define ESR_SOR		(1UL<< 4)	/* error source */
-#define ESR_CTE		(1UL<< 7)	/* cache-tag error */
-#define ESR_MSE		(1UL<< 9)	/* multiple soft errors */
-#define ESR_MHE		(1UL<<10)	/* multiple hard errors */
-#define ESR_NXM		(1UL<<12)	/* non-existent memory */
-
-#define IOC_ERR		(  1<<4)	/* ioc logs an error */
-#define IOC_CMD_SHIFT	0
-#define IOC_CMD		(0xf<<IOC_CMD_SHIFT)
-#define IOC_CODE_SHIFT	8
-#define IOC_CODE	(0xf<<IOC_CODE_SHIFT)
-#define IOC_LOST	(  1<<5)
-#define IOC_P_NBR	((__u32) ~((1<<13) - 1))
-
-static void
-mem_error(unsigned long esr, unsigned long ear)
-{
-	printk("    %s %s error to %s occurred at address %x\n",
-	       ((esr & ESR_CEE) ? "Correctable" :
-		(esr & ESR_UEE) ? "Uncorrectable" : "A"),
-	       (esr & ESR_WRE) ? "write" : "read",
-	       (esr & ESR_SOR) ? "memory" : "b-cache",
-	       (unsigned) (ear & 0x1ffffff8));
-	if (esr & ESR_CTE) {
-		printk("    A b-cache tag parity error was detected.\n");
-	}
-	if (esr & ESR_MSE) {
-		printk("    Several other correctable errors occurred.\n");
-	}
-	if (esr & ESR_MHE) {
-		printk("    Several other uncorrectable errors occurred.\n");
-	}
-	if (esr & ESR_NXM) {
-		printk("    Attempted to access non-existent memory.\n");
-	}
-}
-
-static void
-ioc_error(__u32 stat0, __u32 stat1)
-{
-	static const char * const pci_cmd[] = {
-		"Interrupt Acknowledge", "Special", "I/O Read", "I/O Write",
-		"Rsvd 1", "Rsvd 2", "Memory Read", "Memory Write", "Rsvd3",
-		"Rsvd4", "Configuration Read", "Configuration Write",
-		"Memory Read Multiple", "Dual Address", "Memory Read Line",
-		"Memory Write and Invalidate"
-	};
-	static const char * const err_name[] = {
-		"exceeded retry limit", "no device", "bad data parity",
-		"target abort", "bad address parity", "page table read error",
-		"invalid page", "data error"
-	};
-	unsigned code = (stat0 & IOC_CODE) >> IOC_CODE_SHIFT;
-	unsigned cmd  = (stat0 & IOC_CMD)  >> IOC_CMD_SHIFT;
-
-	printk("    %s initiated PCI %s cycle to address %x"
-	       " failed due to %s.\n",
-	       code > 3 ? "PCI" : "CPU", pci_cmd[cmd], stat1, err_name[code]);
-
-	if (code == 5 || code == 6) {
-		printk("    (Error occurred at PCI memory address %x.)\n",
-		       (stat0 & ~IOC_P_NBR));
-	}
-	if (stat0 & IOC_LOST) {
-		printk("    Other PCI errors occurred simultaneously.\n");
-	}
-}
-
-void
-lca_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	const char * reason;
-	union el_lca el;
-
-	el.c = (struct el_common *) la_ptr;
-
-	wrmces(rdmces());	/* reset machine check pending flag */
-
-	printk(KERN_CRIT "LCA machine check: vector=%#lx pc=%#lx code=%#x\n",
-	       vector, get_irq_regs()->pc, (unsigned int) el.c->code);
-
-	/*
-	 * The first quadword after the common header always seems to
-	 * be the machine check reason---don't know why this isn't
-	 * part of the common header instead.  In the case of a long
-	 * logout frame, the upper 32 bits is the machine check
-	 * revision level, which we ignore for now.
-	 */
-	switch ((unsigned int) el.c->code) {
-	case MCHK_K_TPERR:	reason = "tag parity error"; break;
-	case MCHK_K_TCPERR:	reason = "tag control parity error"; break;
-	case MCHK_K_HERR:	reason = "access to non-existent memory"; break;
-	case MCHK_K_ECC_C:	reason = "correctable ECC error"; break;
-	case MCHK_K_ECC_NC:	reason = "non-correctable ECC error"; break;
-	case MCHK_K_CACKSOFT:	reason = "MCHK_K_CACKSOFT"; break;
-	case MCHK_K_BUGCHECK:	reason = "illegal exception in PAL mode"; break;
-	case MCHK_K_OS_BUGCHECK: reason = "callsys in kernel mode"; break;
-	case MCHK_K_DCPERR:	reason = "d-cache parity error"; break;
-	case MCHK_K_ICPERR:	reason = "i-cache parity error"; break;
-	case MCHK_K_SIO_SERR:	reason = "SIO SERR occurred on PCI bus"; break;
-	case MCHK_K_SIO_IOCHK:	reason = "SIO IOCHK occurred on ISA bus"; break;
-	case MCHK_K_DCSR:	reason = "MCHK_K_DCSR"; break;
-	case MCHK_K_UNKNOWN:
-	default:		reason = "unknown"; break;
-	}
-
-	switch (el.c->size) {
-	case sizeof(struct el_lca_mcheck_short):
-		printk(KERN_CRIT
-		       "  Reason: %s (short frame%s, dc_stat=%#lx):\n",
-		       reason, el.c->retry ? ", retryable" : "",
-		       el.s->dc_stat);
-		if (el.s->esr & ESR_EAV) {
-			mem_error(el.s->esr, el.s->ear);
-		}
-		if (el.s->ioc_stat0 & IOC_ERR) {
-			ioc_error(el.s->ioc_stat0, el.s->ioc_stat1);
-		}
-		break;
-
-	case sizeof(struct el_lca_mcheck_long):
-		printk(KERN_CRIT "  Reason: %s (long frame%s):\n",
-		       reason, el.c->retry ? ", retryable" : "");
-		printk(KERN_CRIT
-		       "    reason: %#lx  exc_addr: %#lx  dc_stat: %#lx\n", 
-		       el.l->pt[0], el.l->exc_addr, el.l->dc_stat);
-		printk(KERN_CRIT "    car: %#lx\n", el.l->car);
-		if (el.l->esr & ESR_EAV) {
-			mem_error(el.l->esr, el.l->ear);
-		}
-		if (el.l->ioc_stat0 & IOC_ERR) {
-			ioc_error(el.l->ioc_stat0, el.l->ioc_stat1);
-		}
-		break;
-
-	default:
-		printk(KERN_CRIT "  Unknown errorlog size %d\n", el.c->size);
-	}
-
-	/* Dump the logout area to give all info.  */
-#ifdef CONFIG_VERBOSE_MCHECK
-	if (alpha_verbose_mcheck > 1) {
-		unsigned long * ptr = (unsigned long *) la_ptr;
-		long i;
-		for (i = 0; i < el.c->size / sizeof(long); i += 2) {
-			printk(KERN_CRIT " +%8lx %016lx %016lx\n",
-			       i*sizeof(long), ptr[i], ptr[i+1]);
-		}
-	}
-#endif /* CONFIG_VERBOSE_MCHECK */
-}
-
-/*
- * The following routines are needed to support the SPEED changing
- * necessary to successfully manage the thermal problem on the AlphaBook1.
- */
-
-void
-lca_clock_print(void)
-{
-        long    pmr_reg;
-
-        pmr_reg = LCA_READ_PMR;
-
-        printk("Status of clock control:\n");
-        printk("\tPrimary clock divisor\t0x%lx\n", LCA_GET_PRIMARY(pmr_reg));
-        printk("\tOverride clock divisor\t0x%lx\n", LCA_GET_OVERRIDE(pmr_reg));
-        printk("\tInterrupt override is %s\n",
-	       (pmr_reg & LCA_PMR_INTO) ? "on" : "off"); 
-        printk("\tDMA override is %s\n",
-	       (pmr_reg & LCA_PMR_DMAO) ? "on" : "off"); 
-
-}
-
-int
-lca_get_clock(void)
-{
-        long    pmr_reg;
-
-        pmr_reg = LCA_READ_PMR;
-        return(LCA_GET_PRIMARY(pmr_reg));
-
-}
-
-void
-lca_clock_fiddle(int divisor)
-{
-        long    pmr_reg;
-
-        pmr_reg = LCA_READ_PMR;
-        LCA_SET_PRIMARY_CLOCK(pmr_reg, divisor);
-	/* lca_norm_clock = divisor; */
-        LCA_WRITE_PMR(pmr_reg);
-        mb();
-}
diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c
index 1efca79ac83c..d38f4d6759e4 100644
--- a/arch/alpha/kernel/core_marvel.c
+++ b/arch/alpha/kernel/core_marvel.c
@@ -17,6 +17,7 @@
 #include <linux/vmalloc.h>
 #include <linux/mc146818rtc.h>
 #include <linux/rtc.h>
+#include <linux/string.h>
 #include <linux/module.h>
 #include <linux/memblock.h>
 
@@ -79,13 +80,12 @@ mk_resource_name(int pe, int port, char *str)
 {
 	char tmp[80];
 	char *name;
-	
-	sprintf(tmp, "PCI %s PE %d PORT %d", str, pe, port);
-	name = memblock_alloc(strlen(tmp) + 1, SMP_CACHE_BYTES);
-	if (!name)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      strlen(tmp) + 1);
-	strcpy(name, tmp);
+	size_t sz;
+
+	sz = scnprintf(tmp, sizeof(tmp), "PCI %s PE %d PORT %d", str, pe, port);
+	sz += 1; /* NUL terminator */
+	name = memblock_alloc_or_panic(sz, SMP_CACHE_BYTES);
+	strscpy(name, tmp, sz);
 
 	return name;
 }
@@ -119,10 +119,7 @@ alloc_io7(unsigned int pe)
 		return NULL;
 	}
 
-	io7 = memblock_alloc(sizeof(*io7), SMP_CACHE_BYTES);
-	if (!io7)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(*io7));
+	io7 = memblock_alloc_or_panic(sizeof(*io7), SMP_CACHE_BYTES);
 	io7->pe = pe;
 	raw_spin_lock_init(&io7->irq_lock);
 
@@ -355,7 +352,7 @@ marvel_init_io7(struct io7 *io7)
 	}
 }
 
-void __init
+static void __init
 marvel_io7_present(gct6_node *node)
 {
 	int pe;
@@ -803,7 +800,7 @@ void __iomem *marvel_ioportmap (unsigned long addr)
 	return (void __iomem *)addr;
 }
 
-unsigned int
+u8
 marvel_ioread8(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
diff --git a/arch/alpha/kernel/core_t2.c b/arch/alpha/kernel/core_t2.c
index 98d5b6ff8a76..3d72d90624f1 100644
--- a/arch/alpha/kernel/core_t2.c
+++ b/arch/alpha/kernel/core_t2.c
@@ -10,7 +10,7 @@
  * Code common to all T2 core logic chips.
  */
 
-#define __EXTERN_INLINE
+#define __EXTERN_INLINE inline
 #include <asm/io.h>
 #include <asm/core_t2.h>
 #undef __EXTERN_INLINE
diff --git a/arch/alpha/kernel/core_wildfire.c b/arch/alpha/kernel/core_wildfire.c
index 3a804b67f9da..8dd08c5e4270 100644
--- a/arch/alpha/kernel/core_wildfire.c
+++ b/arch/alpha/kernel/core_wildfire.c
@@ -59,7 +59,7 @@ unsigned long wildfire_pca_mask;
 unsigned long wildfire_cpu_mask;
 unsigned long wildfire_mem_mask;
 
-void __init
+static void __init
 wildfire_init_hose(int qbbno, int hoseno)
 {
 	struct pci_controller *hose;
@@ -137,7 +137,7 @@ wildfire_init_hose(int qbbno, int hoseno)
 	wildfire_pci_tbi(hose, 0, 0); /* Flush TLB at the end. */
 }
 
-void __init
+static void __init
 wildfire_init_pca(int qbbno, int pcano)
 {
 
@@ -154,7 +154,7 @@ wildfire_init_pca(int qbbno, int pcano)
 	wildfire_init_hose(qbbno, (pcano << 1) + 1);
 }
 
-void __init
+static void __init
 wildfire_init_qbb(int qbbno)
 {
 	int pcano;
@@ -176,7 +176,7 @@ wildfire_init_qbb(int qbbno)
 	}
 }
 
-void __init
+static void __init
 wildfire_hardware_probe(void)
 {
 	unsigned long temp;
diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index e227f3a29a43..f4d41b4538c2 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -15,10 +15,6 @@
 	.set noat
 	.cfi_sections	.debug_frame
 
-/* Stack offsets.  */
-#define SP_OFF			184
-#define SWITCH_STACK_SIZE	320
-
 .macro	CFI_START_OSF_FRAME	func
 	.align	4
 	.globl	\func
@@ -159,7 +155,6 @@
 	.cfi_rel_offset	$13, 32
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
-	/* We don't really care about the FP registers for debugging.  */
 .endm
 
 .macro	UNDO_SWITCH_STACK
@@ -199,8 +194,8 @@ CFI_END_OSF_FRAME entArith
 CFI_START_OSF_FRAME entMM
 	SAVE_ALL
 /* save $9 - $15 so the inline exception code can manipulate them.  */
-	subq	$sp, 56, $sp
-	.cfi_adjust_cfa_offset	56
+	subq	$sp, 64, $sp
+	.cfi_adjust_cfa_offset	64
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -215,7 +210,7 @@ CFI_START_OSF_FRAME entMM
 	.cfi_rel_offset	$13, 32
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
-	addq	$sp, 56, $19
+	addq	$sp, 64, $19
 /* handle the fault */
 	lda	$8, 0x3fff
 	bic	$sp, $8, $8
@@ -228,7 +223,7 @@ CFI_START_OSF_FRAME entMM
 	ldq	$13, 32($sp)
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
-	addq	$sp, 56, $sp
+	addq	$sp, 64, $sp
 	.cfi_restore	$9
 	.cfi_restore	$10
 	.cfi_restore	$11
@@ -236,7 +231,7 @@ CFI_START_OSF_FRAME entMM
 	.cfi_restore	$13
 	.cfi_restore	$14
 	.cfi_restore	$15
-	.cfi_adjust_cfa_offset	-56
+	.cfi_adjust_cfa_offset	-64
 /* finish up the syscall as normal.  */
 	br	ret_from_sys_call
 CFI_END_OSF_FRAME entMM
@@ -383,8 +378,8 @@ entUnaUser:
 	.cfi_restore	$0
 	.cfi_adjust_cfa_offset	-256
 	SAVE_ALL		/* setup normal kernel stack */
-	lda	$sp, -56($sp)
-	.cfi_adjust_cfa_offset	56
+	lda	$sp, -64($sp)
+	.cfi_adjust_cfa_offset	64
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -400,7 +395,7 @@ entUnaUser:
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
 	lda	$8, 0x3fff
-	addq	$sp, 56, $19
+	addq	$sp, 64, $19
 	bic	$sp, $8, $8
 	jsr	$26, do_entUnaUser
 	ldq	$9, 0($sp)
@@ -410,7 +405,7 @@ entUnaUser:
 	ldq	$13, 32($sp)
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
-	lda	$sp, 56($sp)
+	lda	$sp, 64($sp)
 	.cfi_restore	$9
 	.cfi_restore	$10
 	.cfi_restore	$11
@@ -418,7 +413,7 @@ entUnaUser:
 	.cfi_restore	$13
 	.cfi_restore	$14
 	.cfi_restore	$15
-	.cfi_adjust_cfa_offset	-56
+	.cfi_adjust_cfa_offset	-64
 	br	ret_from_sys_call
 CFI_END_OSF_FRAME entUna
 
@@ -454,7 +449,7 @@ entSys:
 	SAVE_ALL
 	lda	$8, 0x3fff
 	bic	$sp, $8, $8
-	lda	$4, NR_SYSCALLS($31)
+	lda	$4, NR_syscalls($31)
 	stq	$16, SP_OFF+24($sp)
 	lda	$5, sys_call_table
 	lda	$27, sys_ni_syscall
@@ -469,13 +464,16 @@ entSys:
 #ifdef CONFIG_AUDITSYSCALL
 	lda     $6, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
 	and     $3, $6, $3
-#endif
 	bne     $3, strace
+#else
+	blbs    $3, strace		/* check for SYSCALL_TRACE in disguise */
+#endif
 	beq	$4, 1f
 	ldq	$27, 0($5)
 1:	jsr	$26, ($27), sys_ni_syscall
 	ldgp	$gp, 0($26)
 	blt	$0, $syscall_error	/* the call failed */
+$ret_success:
 	stq	$0, 0($sp)
 	stq	$31, 72($sp)		/* a3=0 => no error */
 
@@ -495,6 +493,10 @@ ret_to_user:
 	and	$17, _TIF_WORK_MASK, $2
 	bne	$2, work_pending
 restore_all:
+	ldl	$2, TI_STATUS($8)
+	and	$2, TS_SAVED_FP | TS_RESTORE_FP, $3
+	bne	$3, restore_fpu
+restore_other:
 	.cfi_remember_state
 	RESTORE_ALL
 	call_pal PAL_rti
@@ -503,7 +505,7 @@ ret_to_kernel:
 	.cfi_restore_state
 	lda	$16, 7
 	call_pal PAL_swpipl
-	br restore_all
+	br restore_other
 
 	.align 3
 $syscall_error:
@@ -525,11 +527,6 @@ $syscall_error:
 	stq	$1, 72($sp)	/* a3 for return */
 	br	ret_from_sys_call
 
-$ret_success:
-	stq	$0, 0($sp)
-	stq	$31, 72($sp)	/* a3=0 => no error */
-	br	ret_from_sys_call
-
 /*
  * Do all cleanup when returning from all interrupts and system calls.
  *
@@ -572,6 +569,14 @@ $work_notifysig:
 	.type	strace, @function
 strace:
 	/* set up signal stack, call syscall_trace */
+	// NB: if anyone adds preemption, this block will need to be protected
+	ldl	$1, TI_STATUS($8)
+	and	$1, TS_SAVED_FP, $3
+	or	$1, TS_SAVED_FP, $2
+	bne	$3, 1f
+	stl	$2, TI_STATUS($8)
+	bsr	$26, __save_fpu
+1:
 	DO_SWITCH_STACK
 	jsr	$26, syscall_trace_enter /* returns the syscall number */
 	UNDO_SWITCH_STACK
@@ -585,7 +590,7 @@ strace:
 	ldq	$21, 88($sp)
 
 	/* get the system call pointer.. */
-	lda	$1, NR_SYSCALLS($31)
+	lda	$1, NR_syscalls($31)
 	lda	$2, sys_call_table
 	lda	$27, sys_ni_syscall
 	cmpult	$0, $1, $1
@@ -598,8 +603,8 @@ ret_from_straced:
 
 	/* check return.. */
 	blt	$0, $strace_error	/* the call failed */
-	stq	$31, 72($sp)		/* a3=0 => no error */
 $strace_success:
+	stq	$31, 72($sp)		/* a3=0 => no error */
 	stq	$0, 0($sp)		/* save return value */
 
 	DO_SWITCH_STACK
@@ -651,40 +656,6 @@ do_switch_stack:
 	stq	$14, 40($sp)
 	stq	$15, 48($sp)
 	stq	$26, 56($sp)
-	stt	$f0, 64($sp)
-	stt	$f1, 72($sp)
-	stt	$f2, 80($sp)
-	stt	$f3, 88($sp)
-	stt	$f4, 96($sp)
-	stt	$f5, 104($sp)
-	stt	$f6, 112($sp)
-	stt	$f7, 120($sp)
-	stt	$f8, 128($sp)
-	stt	$f9, 136($sp)
-	stt	$f10, 144($sp)
-	stt	$f11, 152($sp)
-	stt	$f12, 160($sp)
-	stt	$f13, 168($sp)
-	stt	$f14, 176($sp)
-	stt	$f15, 184($sp)
-	stt	$f16, 192($sp)
-	stt	$f17, 200($sp)
-	stt	$f18, 208($sp)
-	stt	$f19, 216($sp)
-	stt	$f20, 224($sp)
-	stt	$f21, 232($sp)
-	stt	$f22, 240($sp)
-	stt	$f23, 248($sp)
-	stt	$f24, 256($sp)
-	stt	$f25, 264($sp)
-	stt	$f26, 272($sp)
-	stt	$f27, 280($sp)
-	mf_fpcr	$f0		# get fpcr
-	stt	$f28, 288($sp)
-	stt	$f29, 296($sp)
-	stt	$f30, 304($sp)
-	stt	$f0, 312($sp)	# save fpcr in slot of $f31
-	ldt	$f0, 64($sp)	# dont let "do_switch_stack" change fp state.
 	ret	$31, ($1), 1
 	.cfi_endproc
 	.size	do_switch_stack, .-do_switch_stack
@@ -703,54 +674,71 @@ undo_switch_stack:
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
 	ldq	$26, 56($sp)
-	ldt	$f30, 312($sp)	# get saved fpcr
-	ldt	$f0, 64($sp)
-	ldt	$f1, 72($sp)
-	ldt	$f2, 80($sp)
-	ldt	$f3, 88($sp)
-	mt_fpcr	$f30		# install saved fpcr
-	ldt	$f4, 96($sp)
-	ldt	$f5, 104($sp)
-	ldt	$f6, 112($sp)
-	ldt	$f7, 120($sp)
-	ldt	$f8, 128($sp)
-	ldt	$f9, 136($sp)
-	ldt	$f10, 144($sp)
-	ldt	$f11, 152($sp)
-	ldt	$f12, 160($sp)
-	ldt	$f13, 168($sp)
-	ldt	$f14, 176($sp)
-	ldt	$f15, 184($sp)
-	ldt	$f16, 192($sp)
-	ldt	$f17, 200($sp)
-	ldt	$f18, 208($sp)
-	ldt	$f19, 216($sp)
-	ldt	$f20, 224($sp)
-	ldt	$f21, 232($sp)
-	ldt	$f22, 240($sp)
-	ldt	$f23, 248($sp)
-	ldt	$f24, 256($sp)
-	ldt	$f25, 264($sp)
-	ldt	$f26, 272($sp)
-	ldt	$f27, 280($sp)
-	ldt	$f28, 288($sp)
-	ldt	$f29, 296($sp)
-	ldt	$f30, 304($sp)
 	lda	$sp, SWITCH_STACK_SIZE($sp)
 	ret	$31, ($1), 1
 	.cfi_endproc
 	.size	undo_switch_stack, .-undo_switch_stack
+
+#define FR(n) n * 8 + TI_FP($8)
+	.align	4
+	.globl	__save_fpu
+	.type	__save_fpu, @function
+__save_fpu:
+#define V(n) stt	$f##n, FR(n)
+	V( 0); V( 1); V( 2); V( 3)
+	V( 4); V( 5); V( 6); V( 7)
+	V( 8); V( 9); V(10); V(11)
+	V(12); V(13); V(14); V(15)
+	V(16); V(17); V(18); V(19)
+	V(20); V(21); V(22); V(23)
+	V(24); V(25); V(26); V(27)
+	mf_fpcr	$f0		# get fpcr
+	V(28); V(29); V(30)
+	stt	$f0, FR(31)	# save fpcr in slot of $f31
+	ldt	$f0, FR(0)	# don't let "__save_fpu" change fp state.
+	ret
+#undef V
+	.size	__save_fpu, .-__save_fpu
+
+	.align	4
+restore_fpu:
+	and	$3, TS_RESTORE_FP, $3
+	bic	$2, TS_SAVED_FP | TS_RESTORE_FP, $2
+	beq	$3, 1f
+#define V(n) ldt	$f##n, FR(n)
+	ldt	$f30, FR(31)	# get saved fpcr
+	V( 0); V( 1); V( 2); V( 3)
+	mt_fpcr	$f30		# install saved fpcr
+	V( 4); V( 5); V( 6); V( 7)
+	V( 8); V( 9); V(10); V(11)
+	V(12); V(13); V(14); V(15)
+	V(16); V(17); V(18); V(19)
+	V(20); V(21); V(22); V(23)
+	V(24); V(25); V(26); V(27)
+	V(28); V(29); V(30)
+1:	stl $2, TI_STATUS($8)
+	br restore_other
+#undef V
+
 
 /*
  * The meat of the context switch code.
  */
-
 	.align	4
 	.globl	alpha_switch_to
 	.type	alpha_switch_to, @function
 	.cfi_startproc
 alpha_switch_to:
 	DO_SWITCH_STACK
+	ldl	$1, TI_STATUS($8)
+	and	$1, TS_RESTORE_FP, $3
+	bne	$3, 1f
+	or	$1, TS_RESTORE_FP | TS_SAVED_FP, $2
+	and	$1, TS_SAVED_FP, $3
+	stl	$2, TI_STATUS($8)
+	bne	$3, 1f
+	bsr	$26, __save_fpu
+1:
 	call_pal PAL_swpctx
 	lda	$8, 0x3fff
 	UNDO_SWITCH_STACK
@@ -768,7 +756,7 @@ alpha_switch_to:
 	.align	4
 	.ent	ret_from_fork
 ret_from_fork:
-	lda	$26, ret_from_sys_call
+	lda	$26, ret_to_user
 	mov	$17, $16
 	jmp	$31, schedule_tail
 .end ret_from_fork
@@ -801,6 +789,14 @@ ret_from_kernel_thread:
 alpha_\name:
 	.prologue 0
 	bsr	$1, do_switch_stack
+	// NB: if anyone adds preemption, this block will need to be protected
+	ldl	$1, TI_STATUS($8)
+	and	$1, TS_SAVED_FP, $3
+	or	$1, TS_SAVED_FP, $2
+	bne	$3, 1f
+	stl	$2, TI_STATUS($8)
+	bsr	$26, __save_fpu
+1:
 	jsr	$26, sys_\name
 	ldq	$26, 56($sp)
 	lda	$sp, SWITCH_STACK_SIZE($sp)
@@ -811,6 +807,7 @@ alpha_\name:
 fork_like fork
 fork_like vfork
 fork_like clone
+fork_like clone3
 
 .macro	sigreturn_like name
 	.align	4
diff --git a/arch/alpha/kernel/io.c b/arch/alpha/kernel/io.c
index 838586abb1e0..c28035d6d1e6 100644
--- a/arch/alpha/kernel/io.c
+++ b/arch/alpha/kernel/io.c
@@ -41,6 +41,15 @@ unsigned int ioread32(const void __iomem *addr)
 	return ret;
 }
 
+u64 ioread64(const void __iomem *addr)
+{
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread64)(addr);
+	mb();
+	return ret;
+}
+
 void iowrite8(u8 b, void __iomem *addr)
 {
 	mb();
@@ -59,12 +68,20 @@ void iowrite32(u32 b, void __iomem *addr)
 	IO_CONCAT(__IO_PREFIX,iowrite32)(b, addr);
 }
 
+void iowrite64(u64 b, void __iomem *addr)
+{
+	mb();
+	IO_CONCAT(__IO_PREFIX,iowrite64)(b, addr);
+}
+
 EXPORT_SYMBOL(ioread8);
 EXPORT_SYMBOL(ioread16);
 EXPORT_SYMBOL(ioread32);
+EXPORT_SYMBOL(ioread64);
 EXPORT_SYMBOL(iowrite8);
 EXPORT_SYMBOL(iowrite16);
 EXPORT_SYMBOL(iowrite32);
+EXPORT_SYMBOL(iowrite64);
 
 u8 inb(unsigned long port)
 {
@@ -630,6 +647,10 @@ void _memset_c_io(volatile void __iomem *to, unsigned long c, long count)
 
 EXPORT_SYMBOL(_memset_c_io);
 
+#if IS_ENABLED(CONFIG_VGA_CONSOLE) || IS_ENABLED(CONFIG_MDA_CONSOLE)
+
+#include <asm/vga.h>
+
 /* A version of memcpy used by the vga console routines to move data around
    arbitrarily between screen and main memory.  */
 
@@ -664,6 +685,21 @@ scr_memcpyw(u16 *d, const u16 *s, unsigned int count)
 
 EXPORT_SYMBOL(scr_memcpyw);
 
+void scr_memmovew(u16 *d, const u16 *s, unsigned int count)
+{
+	if (d < s)
+		scr_memcpyw(d, s, count);
+	else {
+		count /= 2;
+		d += count;
+		s += count;
+		while (count--)
+			scr_writew(scr_readw(--s), --d);
+	}
+}
+EXPORT_SYMBOL(scr_memmovew);
+#endif
+
 void __iomem *ioport_map(unsigned long port, unsigned int size)
 {
 	return IO_CONCAT(__IO_PREFIX,ioportmap) (port);
diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
index 15f2effd6baf..c67047c5d830 100644
--- a/arch/alpha/kernel/irq.c
+++ b/arch/alpha/kernel/irq.c
@@ -28,6 +28,7 @@
 
 #include <asm/io.h>
 #include <linux/uaccess.h>
+#include "irq_impl.h"
 
 volatile unsigned long irq_err_count;
 DEFINE_PER_CPU(unsigned long, irq_pmi_count);
diff --git a/arch/alpha/kernel/irq_i8259.c b/arch/alpha/kernel/irq_i8259.c
index 1dcf0d9038fd..29c6c477ac35 100644
--- a/arch/alpha/kernel/irq_i8259.c
+++ b/arch/alpha/kernel/irq_i8259.c
@@ -98,10 +98,6 @@ init_i8259a_irqs(void)
 
 #if defined(CONFIG_ALPHA_GENERIC)
 # define IACK_SC	alpha_mv.iack_sc
-#elif defined(CONFIG_ALPHA_APECS)
-# define IACK_SC	APECS_IACK_SC
-#elif defined(CONFIG_ALPHA_LCA)
-# define IACK_SC	LCA_IACK_SC
 #elif defined(CONFIG_ALPHA_CIA)
 # define IACK_SC	CIA_IACK_SC
 #elif defined(CONFIG_ALPHA_PYXIS)
diff --git a/arch/alpha/kernel/machvec_impl.h b/arch/alpha/kernel/machvec_impl.h
index 393d5d6ca5d2..129ae36b8e6d 100644
--- a/arch/alpha/kernel/machvec_impl.h
+++ b/arch/alpha/kernel/machvec_impl.h
@@ -44,33 +44,14 @@
 
 #define DO_DEFAULT_RTC			.rtc_port = 0x70
 
-#define DO_EV4_MMU							\
-	.max_asn =			EV4_MAX_ASN,			\
-	.mv_switch_mm =			ev4_switch_mm,			\
-	.mv_activate_mm =		ev4_activate_mm,		\
-	.mv_flush_tlb_current =		ev4_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev4_flush_tlb_current_page
-
 #define DO_EV5_MMU							\
-	.max_asn =			EV5_MAX_ASN,			\
-	.mv_switch_mm =			ev5_switch_mm,			\
-	.mv_activate_mm =		ev5_activate_mm,		\
-	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page
+	.max_asn =			EV5_MAX_ASN			\
 
 #define DO_EV6_MMU							\
-	.max_asn =			EV6_MAX_ASN,			\
-	.mv_switch_mm =			ev5_switch_mm,			\
-	.mv_activate_mm =		ev5_activate_mm,		\
-	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page
+	.max_asn =			EV6_MAX_ASN			\
 
 #define DO_EV7_MMU							\
-	.max_asn =			EV6_MAX_ASN,			\
-	.mv_switch_mm =			ev5_switch_mm,			\
-	.mv_activate_mm =		ev5_activate_mm,		\
-	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page
+	.max_asn =			EV6_MAX_ASN			\
 
 #define IO_LITE(UP,low)							\
 	.hae_register =		(unsigned long *) CAT(UP,_HAE_ADDRESS),	\
@@ -78,9 +59,11 @@
 	.mv_ioread8 =		CAT(low,_ioread8),			\
 	.mv_ioread16 =		CAT(low,_ioread16),			\
 	.mv_ioread32 =		CAT(low,_ioread32),			\
+	.mv_ioread64 =		CAT(low,_ioread64),			\
 	.mv_iowrite8 =		CAT(low,_iowrite8),			\
 	.mv_iowrite16 =		CAT(low,_iowrite16),			\
 	.mv_iowrite32 =		CAT(low,_iowrite32),			\
+	.mv_iowrite64 =		CAT(low,_iowrite64),			\
 	.mv_readb =		CAT(low,_readb),			\
 	.mv_readw =		CAT(low,_readw),			\
 	.mv_readl =		CAT(low,_readl),			\
diff --git a/arch/alpha/kernel/module.c b/arch/alpha/kernel/module.c
index 5b60c248de9e..cbefa5a77384 100644
--- a/arch/alpha/kernel/module.c
+++ b/arch/alpha/kernel/module.c
@@ -146,10 +146,8 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
 	base = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr;
 	symtab = (Elf64_Sym *)sechdrs[symindex].sh_addr;
 
-	/* The small sections were sorted to the end of the segment.
-	   The following should definitely cover them.  */
-	gp = (u64)me->core_layout.base + me->core_layout.size - 0x8000;
 	got = sechdrs[me->arch.gotsecindex].sh_addr;
+	gp = got + 0x8000;
 
 	for (i = 0; i < n; i++) {
 		unsigned long r_sym = ELF64_R_SYM (rela[i].r_info);
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index d257293401e2..a08e8edef1a4 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -97,7 +97,7 @@ struct osf_dirent {
 	unsigned int d_ino;
 	unsigned short d_reclen;
 	unsigned short d_namlen;
-	char d_name[1];
+	char d_name[];
 };
 
 struct osf_dirent_callback {
@@ -108,7 +108,7 @@ struct osf_dirent_callback {
 	int error;
 };
 
-static int
+static bool
 osf_filldir(struct dir_context *ctx, const char *name, int namlen,
 	    loff_t offset, u64 ino, unsigned int d_type)
 {
@@ -120,11 +120,11 @@ osf_filldir(struct dir_context *ctx, const char *name, int namlen,
 
 	buf->error = -EINVAL;	/* only used if we fail */
 	if (reclen > buf->count)
-		return -EINVAL;
+		return false;
 	d_ino = ino;
 	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
 		buf->error = -EOVERFLOW;
-		return -EOVERFLOW;
+		return false;
 	}
 	if (buf->basep) {
 		if (put_user(offset, buf->basep))
@@ -141,10 +141,10 @@ osf_filldir(struct dir_context *ctx, const char *name, int namlen,
 	dirent = (void __user *)dirent + reclen;
 	buf->dirent = dirent;
 	buf->count -= reclen;
-	return 0;
+	return true;
 Efault:
 	buf->error = -EFAULT;
-	return -EFAULT;
+	return false;
 }
 
 SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd,
@@ -152,7 +152,7 @@ SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd,
 		long __user *, basep)
 {
 	int error;
-	struct fd arg = fdget_pos(fd);
+	CLASS(fd_pos, arg)(fd);
 	struct osf_dirent_callback buf = {
 		.ctx.actor = osf_filldir,
 		.dirent = dirent,
@@ -160,16 +160,15 @@ SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd,
 		.count = count
 	};
 
-	if (!arg.file)
+	if (fd_empty(arg))
 		return -EBADF;
 
-	error = iterate_dir(arg.file, &buf.ctx);
+	error = iterate_dir(fd_file(arg), &buf.ctx);
 	if (error >= 0)
 		error = buf.error;
 	if (count != buf.count)
 		error = count - buf.count;
 
-	fdput_pos(arg);
 	return error;
 }
 
@@ -522,7 +521,7 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, const char __user *, path,
 		break;
 	default:
 		retval = -EINVAL;
-		printk("osf_mount(%ld, %x)\n", typenr, flag);
+		printk_ratelimited("osf_mount(%ld, %x)\n", typenr, flag);
 	}
 
 	return retval;
@@ -1014,8 +1013,6 @@ SYSCALL_DEFINE2(osf_settimeofday, struct timeval32 __user *, tv,
 	return do_sys_settimeofday64(tv ? &kts : NULL, tz ? &ktz : NULL);
 }
 
-asmlinkage long sys_ni_posix_timers(void);
-
 SYSCALL_DEFINE2(osf_utimes, const char __user *, filename,
 		struct timeval32 __user *, tvs)
 {
@@ -1213,36 +1210,26 @@ SYSCALL_DEFINE1(old_adjtimex, struct timex32 __user *, txc_p)
 	return ret;
 }
 
-/* Get an address range which is currently unmapped.  Similar to the
-   generic version except that we know how to honor ADDR_LIMIT_32BIT.  */
+/* Get an address range which is currently unmapped. */
 
 static unsigned long
 arch_get_unmapped_area_1(unsigned long addr, unsigned long len,
 		         unsigned long limit)
 {
-	struct vm_unmapped_area_info info;
+	struct vm_unmapped_area_info info = {};
 
-	info.flags = 0;
 	info.length = len;
 	info.low_limit = addr;
 	info.high_limit = limit;
-	info.align_mask = 0;
-	info.align_offset = 0;
 	return vm_unmapped_area(&info);
 }
 
 unsigned long
 arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		       unsigned long len, unsigned long pgoff,
-		       unsigned long flags)
+		       unsigned long flags, vm_flags_t vm_flags)
 {
-	unsigned long limit;
-
-	/* "32 bit" actually means 31 bit, since pointers sign extend.  */
-	if (current->personality & ADDR_LIMIT_32BIT)
-		limit = 0x80000000;
-	else
-		limit = TASK_SIZE;
+	unsigned long limit = TASK_SIZE;
 
 	if (len > limit)
 		return -ENOMEM;
@@ -1278,48 +1265,6 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	return addr;
 }
 
-#ifdef CONFIG_OSF4_COMPAT
-/* Clear top 32 bits of iov_len in the user's buffer for
-   compatibility with old versions of OSF/1 where iov_len
-   was defined as int. */
-static int
-osf_fix_iov_len(const struct iovec __user *iov, unsigned long count)
-{
-	unsigned long i;
-
-	for (i = 0 ; i < count ; i++) {
-		int __user *iov_len_high = (int __user *)&iov[i].iov_len + 1;
-
-		if (put_user(0, iov_len_high))
-			return -EFAULT;
-	}
-	return 0;
-}
-#endif
-
-SYSCALL_DEFINE3(osf_readv, unsigned long, fd,
-		const struct iovec __user *, vector, unsigned long, count)
-{
-#ifdef CONFIG_OSF4_COMPAT
-	if (unlikely(personality(current->personality) == PER_OSF4))
-		if (osf_fix_iov_len(vector, count))
-			return -EFAULT;
-#endif
-
-	return sys_readv(fd, vector, count);
-}
-
-SYSCALL_DEFINE3(osf_writev, unsigned long, fd,
-		const struct iovec __user *, vector, unsigned long, count)
-{
-#ifdef CONFIG_OSF4_COMPAT
-	if (unlikely(personality(current->personality) == PER_OSF4))
-		if (osf_fix_iov_len(vector, count))
-			return -EFAULT;
-#endif
-	return sys_writev(fd, vector, count);
-}
-
 SYSCALL_DEFINE2(osf_getpriority, int, which, int, who)
 {
 	int prio = sys_getpriority(which, who);
diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c
deleted file mode 100644
index ae82061edae9..000000000000
--- a/arch/alpha/kernel/pci-noop.c
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/pci-noop.c
- *
- * Stub PCI interfaces for Jensen-specific kernels.
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/memblock.h>
-#include <linux/gfp.h>
-#include <linux/capability.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/dma-mapping.h>
-#include <linux/scatterlist.h>
-#include <linux/syscalls.h>
-
-#include "proto.h"
-
-
-/*
- * The PCI controller list.
- */
-
-struct pci_controller *hose_head, **hose_tail = &hose_head;
-struct pci_controller *pci_isa_hose;
-
-
-struct pci_controller * __init
-alloc_pci_controller(void)
-{
-	struct pci_controller *hose;
-
-	hose = memblock_alloc(sizeof(*hose), SMP_CACHE_BYTES);
-	if (!hose)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(*hose));
-
-	*hose_tail = hose;
-	hose_tail = &hose->next;
-
-	return hose;
-}
-
-struct resource * __init
-alloc_resource(void)
-{
-	void *ptr = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES);
-
-	if (!ptr)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(struct resource));
-
-	return ptr;
-}
-
-SYSCALL_DEFINE3(pciconfig_iobase, long, which, unsigned long, bus,
-		unsigned long, dfn)
-{
-	struct pci_controller *hose;
-
-	/* from hose or from bus.devfn */
-	if (which & IOBASE_FROM_HOSE) {
-		for (hose = hose_head; hose; hose = hose->next)
-			if (hose->index == bus)
-				break;
-		if (!hose)
-			return -ENODEV;
-	} else {
-		/* Special hook for ISA access.  */
-		if (bus == 0 && dfn == 0)
-			hose = pci_isa_hose;
-		else
-			return -ENODEV;
-	}
-
-	switch (which & ~IOBASE_FROM_HOSE) {
-	case IOBASE_HOSE:
-		return hose->index;
-	case IOBASE_SPARSE_MEM:
-		return hose->sparse_mem_base;
-	case IOBASE_DENSE_MEM:
-		return hose->dense_mem_base;
-	case IOBASE_SPARSE_IO:
-		return hose->sparse_io_base;
-	case IOBASE_DENSE_IO:
-		return hose->dense_io_base;
-	case IOBASE_ROOT_BUS:
-		return hose->bus->number;
-	}
-
-	return -EOPNOTSUPP;
-}
-
-SYSCALL_DEFINE5(pciconfig_read, unsigned long, bus, unsigned long, dfn,
-		unsigned long, off, unsigned long, len, void __user *, buf)
-{
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	else
-		return -ENODEV;
-}
-
-SYSCALL_DEFINE5(pciconfig_write, unsigned long, bus, unsigned long, dfn,
-		unsigned long, off, unsigned long, len, void __user *, buf)
-{
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	else
-		return -ENODEV;
-}
diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c
index 5808a66e2a81..3048758304b5 100644
--- a/arch/alpha/kernel/pci-sysfs.c
+++ b/arch/alpha/kernel/pci-sysfs.c
@@ -64,7 +64,7 @@ static int __pci_mmap_fits(struct pci_dev *pdev, int num,
  * Return: %0 on success, negative error code otherwise
  */
 static int pci_mmap_resource(struct kobject *kobj,
-			     struct bin_attribute *attr,
+			     const struct bin_attribute *attr,
 			     struct vm_area_struct *vma, int sparse)
 {
 	struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
@@ -93,14 +93,14 @@ static int pci_mmap_resource(struct kobject *kobj,
 }
 
 static int pci_mmap_resource_sparse(struct file *filp, struct kobject *kobj,
-				    struct bin_attribute *attr,
+				    const struct bin_attribute *attr,
 				    struct vm_area_struct *vma)
 {
 	return pci_mmap_resource(kobj, attr, vma, 1);
 }
 
 static int pci_mmap_resource_dense(struct file *filp, struct kobject *kobj,
-				   struct bin_attribute *attr,
+				   const struct bin_attribute *attr,
 				   struct vm_area_struct *vma)
 {
 	return pci_mmap_resource(kobj, attr, vma, 0);
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index 64fbfb0763b2..8e9b4ac86b7e 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -288,11 +288,10 @@ pcibios_claim_one_bus(struct pci_bus *b)
 	struct pci_bus *child_bus;
 
 	list_for_each_entry(dev, &b->devices, bus_list) {
+		struct resource *r;
 		int i;
 
-		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-			struct resource *r = &dev->resource[i];
-
+		pci_dev_for_each_resource(dev, r, i) {
 			if (r->parent || !r->start || !r->flags)
 				continue;
 			if (pci_has_flag(PCI_PROBE_ONLY) ||
@@ -392,10 +391,7 @@ alloc_pci_controller(void)
 {
 	struct pci_controller *hose;
 
-	hose = memblock_alloc(sizeof(*hose), SMP_CACHE_BYTES);
-	if (!hose)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(*hose));
+	hose = memblock_alloc_or_panic(sizeof(*hose), SMP_CACHE_BYTES);
 
 	*hose_tail = hose;
 	hose_tail = &hose->next;
@@ -406,13 +402,7 @@ alloc_pci_controller(void)
 struct resource * __init
 alloc_resource(void)
 {
-	void *ptr = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES);
-
-	if (!ptr)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(struct resource));
-
-	return ptr;
+	return memblock_alloc_or_panic(sizeof(struct resource), SMP_CACHE_BYTES);
 }
 
 
diff --git a/arch/alpha/kernel/pci_impl.h b/arch/alpha/kernel/pci_impl.h
index 18043af45e2b..a16325ce21c4 100644
--- a/arch/alpha/kernel/pci_impl.h
+++ b/arch/alpha/kernel/pci_impl.h
@@ -143,9 +143,7 @@ struct pci_iommu_arena
 	unsigned int align_entry;
 };
 
-#if defined(CONFIG_ALPHA_SRM) && \
-    (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA) || \
-     defined(CONFIG_ALPHA_AVANTI))
+#if defined(CONFIG_ALPHA_SRM) && defined(CONFIG_ALPHA_CIA)
 # define NEED_SRM_SAVE_RESTORE
 #else
 # undef NEED_SRM_SAVE_RESTORE
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index e83a02ed5267..dc91de50f906 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -13,6 +13,7 @@
 #include <linux/log2.h>
 #include <linux/dma-map-ops.h>
 #include <linux/iommu-helper.h>
+#include <linux/string_choices.h>
 
 #include <asm/io.h>
 #include <asm/hwrpb.h>
@@ -71,14 +72,8 @@ iommu_arena_new_node(int nid, struct pci_controller *hose, dma_addr_t base,
 	if (align < mem_size)
 		align = mem_size;
 
-	arena = memblock_alloc(sizeof(*arena), SMP_CACHE_BYTES);
-	if (!arena)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(*arena));
-	arena->ptes = memblock_alloc(mem_size, align);
-	if (!arena->ptes)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, mem_size, align);
+	arena = memblock_alloc_or_panic(sizeof(*arena), SMP_CACHE_BYTES);
+	arena->ptes = memblock_alloc_or_panic(mem_size, align);
 
 	spin_lock_init(&arena->lock);
 	arena->hose = hose;
@@ -127,10 +122,12 @@ again:
 			goto again;
 		}
 
-		if (ptes[p+i])
-			p = ALIGN(p + i + 1, mask + 1), i = 0;
-		else
+		if (ptes[p+i]) {
+			p = ALIGN(p + i + 1, mask + 1);
+			i = 0;
+		} else {
 			i = i + 1;
+		}
 	}
 
 	if (i < n) {
@@ -216,7 +213,7 @@ static int pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
 
 	/* If both conditions above are met, we are fine. */
 	DBGA("pci_dac_dma_supported %s from %ps\n",
-	     ok ? "yes" : "no", __builtin_return_address(0));
+	     str_yes_no(ok), __builtin_return_address(0));
 
 	return ok;
 }
@@ -927,7 +924,7 @@ const struct dma_map_ops alpha_pci_ops = {
 	.dma_supported		= alpha_pci_supported,
 	.mmap			= dma_common_mmap,
 	.get_sgtable		= dma_common_get_sgtable,
-	.alloc_pages		= dma_common_alloc_pages,
+	.alloc_pages_op		= dma_common_alloc_pages,
 	.free_pages		= dma_common_free_pages,
 };
 EXPORT_SYMBOL(alpha_pci_ops);
diff --git a/arch/alpha/kernel/perf_event.c b/arch/alpha/kernel/perf_event.c
index efcf7321701b..a3eaab094ece 100644
--- a/arch/alpha/kernel/perf_event.c
+++ b/arch/alpha/kernel/perf_event.c
@@ -689,8 +689,6 @@ static int __hw_perf_event_init(struct perf_event *event)
  */
 static int alpha_pmu_event_init(struct perf_event *event)
 {
-	int err;
-
 	/* does not support taken branch sampling */
 	if (has_branch_stack(event))
 		return -EOPNOTSUPP;
@@ -709,9 +707,7 @@ static int alpha_pmu_event_init(struct perf_event *event)
 		return -ENODEV;
 
 	/* Do the real initialisation work. */
-	err = __hw_perf_event_init(event);
-
-	return err;
+	return __hw_perf_event_init(event);
 }
 
 /*
@@ -856,14 +852,9 @@ static void alpha_perf_event_irq_handler(unsigned long la_ptr,
 	alpha_perf_event_update(event, hwc, idx, alpha_pmu->pmc_max_period[idx]+1);
 	perf_sample_data_init(&data, 0, hwc->last_period);
 
-	if (alpha_perf_event_set_period(event, hwc, idx)) {
-		if (perf_event_overflow(event, &data, regs)) {
-			/* Interrupts coming too quickly; "throttle" the
-			 * counter, i.e., disable it for a little while.
-			 */
-			alpha_pmu_stop(event, 0);
-		}
-	}
+	if (alpha_perf_event_set_period(event, hwc, idx))
+		perf_event_overflow(event, &data, regs);
+
 	wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
 
 	return;
@@ -874,7 +865,7 @@ static void alpha_perf_event_irq_handler(unsigned long la_ptr,
 /*
  * Init call to initialise performance events at kernel startup.
  */
-int __init init_hw_perf_events(void)
+static int __init init_hw_perf_events(void)
 {
 	pr_info("Performance events: ");
 
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index e2e25f8b5e76..06522451f018 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -9,6 +9,7 @@
  * This file handles the architecture-dependent parts of process handling.
  */
 
+#include <linux/cpu.h>
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/sched.h>
@@ -57,12 +58,12 @@ EXPORT_SYMBOL(pm_power_off);
 void arch_cpu_idle(void)
 {
 	wtint(0);
-	raw_local_irq_enable();
 }
 
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	wtint(INT_MAX);
+	BUG();
 }
 #endif /* ALPHA_WTINT */
 
@@ -74,7 +75,7 @@ struct halt_info {
 static void
 common_shutdown_1(void *generic_ptr)
 {
-	struct halt_info *how = (struct halt_info *)generic_ptr;
+	struct halt_info *how = generic_ptr;
 	struct percpu_struct *cpup;
 	unsigned long *pflags, flags;
 	int cpuid = smp_processor_id();
@@ -134,7 +135,7 @@ common_shutdown_1(void *generic_ptr)
 #ifdef CONFIG_DUMMY_CONSOLE
 		/* If we've gotten here after SysRq-b, leave interrupt
 		   context before taking over the console. */
-		if (in_irq())
+		if (in_hardirq())
 			irq_exit();
 		/* This has the effect of resetting the VGA video origin.  */
 		console_lock();
@@ -225,17 +226,12 @@ flush_thread(void)
 	current_thread_info()->pcb.unique = 0;
 }
 
-void
-release_thread(struct task_struct *dead_task)
-{
-}
-
 /*
  * Copy architecture-specific thread state
  */
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	extern void ret_from_fork(void);
@@ -249,6 +245,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 	childstack = ((struct switch_stack *) childregs) - 1;
 	childti->pcb.ksp = (unsigned long) childstack;
 	childti->pcb.flags = 1;	/* set FEN, clear everything else */
+	childti->status |= TS_SAVED_FP | TS_RESTORE_FP;
 
 	if (unlikely(args->fn)) {
 		/* kernel thread */
@@ -258,6 +255,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 		childstack->r9 = (unsigned long) args->fn;
 		childstack->r10 = (unsigned long) args->fn_arg;
 		childregs->hae = alpha_mv.hae_cache;
+		memset(childti->fp, '\0', sizeof(childti->fp));
 		childti->pcb.usp = 0;
 		return 0;
 	}
@@ -338,14 +336,11 @@ dump_elf_task(elf_greg_t *dest, struct task_struct *task)
 }
 EXPORT_SYMBOL(dump_elf_task);
 
-int
-dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task)
+int elf_core_copy_task_fpregs(struct task_struct *t, elf_fpregset_t *fpu)
 {
-	struct switch_stack *sw = (struct switch_stack *)task_pt_regs(task) - 1;
-	memcpy(dest, sw->fp, 32 * 8);
+	memcpy(fpu, task_thread_info(t)->fp, 32 * 8);
 	return 1;
 }
-EXPORT_SYMBOL(dump_elf_task_fp);
 
 /*
  * Return saved PC of a blocked thread.  This assumes the frame
diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h
index 5816a31c1b38..a8bc3ead776b 100644
--- a/arch/alpha/kernel/proto.h
+++ b/arch/alpha/kernel/proto.h
@@ -1,5 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #include <linux/interrupt.h>
+#include <linux/screen_info.h>
 #include <linux/io.h>
 
 /* Prototypes of functions used across modules here in this directory.  */
@@ -14,13 +15,7 @@ struct pt_regs;
 struct task_struct;
 struct pci_dev;
 struct pci_controller;
-
-/* core_apecs.c */
-extern struct pci_ops apecs_pci_ops;
-extern void apecs_init_arch(void);
-extern void apecs_pci_clr_err(void);
-extern void apecs_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void apecs_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
+struct pci_bus;
 
 /* core_cia.c */
 extern struct pci_ops cia_pci_ops;
@@ -37,12 +32,6 @@ extern int irongate_pci_clr_err(void);
 extern void irongate_init_arch(void);
 #define irongate_pci_tbi ((void *)0)
 
-/* core_lca.c */
-extern struct pci_ops lca_pci_ops;
-extern void lca_init_arch(void);
-extern void lca_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-
 /* core_marvel.c */
 extern struct pci_ops marvel_pci_ops;
 extern void marvel_init_arch(void);
@@ -113,6 +102,10 @@ extern int boot_cpuid;
 #ifdef CONFIG_VERBOSE_MCHECK
 extern unsigned long alpha_verbose_mcheck;
 #endif
+#ifdef CONFIG_BLK_DEV_INITRD
+extern void * __init move_initrd(unsigned long);
+#endif
+extern struct screen_info vgacon_screen_info;
 
 /* srmcons.c */
 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SRM)
@@ -126,6 +119,7 @@ extern void unregister_srm_console(void);
 /* smp.c */
 extern void setup_smp(void);
 extern void handle_ipi(struct pt_regs *);
+extern void __init smp_callin(void);
 
 /* bios32.c */
 /* extern void reset_for_srm(void); */
@@ -137,13 +131,13 @@ extern void common_init_rtc(void);
 extern unsigned long est_cycle_freq;
 
 /* smc37c93x.c */
-extern void SMC93x_Init(void);
+extern int __init SMC93x_Init(void);
 
 /* smc37c669.c */
-extern void SMC669_Init(int);
+extern void __init SMC669_Init(int);
 
 /* es1888.c */
-extern void es1888_init(void);
+extern void __init es1888_init(void);
 
 /* ../lib/fpreg.c */
 extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
@@ -164,19 +158,37 @@ extern void entSys(void);
 extern void entUna(void);
 extern void entDbg(void);
 
+/* pci.c */
+extern void pcibios_claim_one_bus(struct pci_bus *);
+
 /* ptrace.c */
 extern int ptrace_set_bpt (struct task_struct *child);
 extern int ptrace_cancel_bpt (struct task_struct *child);
+extern void syscall_trace_leave(void);
+extern unsigned long syscall_trace_enter(void);
+
+/* signal.c */
+struct sigcontext;
+extern void do_sigreturn(struct sigcontext __user *);
+struct rt_sigframe;
+extern void do_rt_sigreturn(struct rt_sigframe __user *);
+extern void do_work_pending(struct pt_regs *, unsigned long, unsigned long, unsigned long);
 
 /* traps.c */
 extern void dik_show_regs(struct pt_regs *regs, unsigned long *r9_15);
 extern void die_if_kernel(char *, struct pt_regs *, long, unsigned long *);
+extern void do_entInt(unsigned long, unsigned long, unsigned long, struct pt_regs *);
+extern void do_entArith(unsigned long, unsigned long, struct pt_regs *);
+extern void do_entIF(unsigned long, struct pt_regs *);
+extern void do_entDbg(struct pt_regs *);
+struct allregs;
+extern void do_entUna(void *, unsigned long, unsigned long, struct allregs *);
+extern void do_entUnaUser(void __user *, unsigned long, unsigned long, struct pt_regs *);
 
 /* sys_titan.c */
 extern void titan_dispatch_irqs(u64);
 
 /* ../mm/init.c */
-extern void switch_to_system_map(void);
 extern void srm_paging_stop(void);
 
 static inline int
diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c
index a1a239ea002d..fde4c68e7a0b 100644
--- a/arch/alpha/kernel/ptrace.c
+++ b/arch/alpha/kernel/ptrace.c
@@ -78,6 +78,8 @@ enum {
  (PAGE_SIZE*2 - sizeof(struct pt_regs) - sizeof(struct switch_stack) \
   + offsetof(struct switch_stack, reg))
 
+#define FP_REG(reg) (offsetof(struct thread_info, reg))
+
 static int regoff[] = {
 	PT_REG(	   r0), PT_REG(	   r1), PT_REG(	   r2), PT_REG(	  r3),
 	PT_REG(	   r4), PT_REG(	   r5), PT_REG(	   r6), PT_REG(	  r7),
@@ -87,14 +89,14 @@ static int regoff[] = {
 	PT_REG(	  r20), PT_REG(	  r21), PT_REG(	  r22), PT_REG(	 r23),
 	PT_REG(	  r24), PT_REG(	  r25), PT_REG(	  r26), PT_REG(	 r27),
 	PT_REG(	  r28), PT_REG(	   gp),		   -1,		   -1,
-	SW_REG(fp[ 0]), SW_REG(fp[ 1]), SW_REG(fp[ 2]), SW_REG(fp[ 3]),
-	SW_REG(fp[ 4]), SW_REG(fp[ 5]), SW_REG(fp[ 6]), SW_REG(fp[ 7]),
-	SW_REG(fp[ 8]), SW_REG(fp[ 9]), SW_REG(fp[10]), SW_REG(fp[11]),
-	SW_REG(fp[12]), SW_REG(fp[13]), SW_REG(fp[14]), SW_REG(fp[15]),
-	SW_REG(fp[16]), SW_REG(fp[17]), SW_REG(fp[18]), SW_REG(fp[19]),
-	SW_REG(fp[20]), SW_REG(fp[21]), SW_REG(fp[22]), SW_REG(fp[23]),
-	SW_REG(fp[24]), SW_REG(fp[25]), SW_REG(fp[26]), SW_REG(fp[27]),
-	SW_REG(fp[28]), SW_REG(fp[29]), SW_REG(fp[30]), SW_REG(fp[31]),
+	FP_REG(fp[ 0]), FP_REG(fp[ 1]), FP_REG(fp[ 2]), FP_REG(fp[ 3]),
+	FP_REG(fp[ 4]), FP_REG(fp[ 5]), FP_REG(fp[ 6]), FP_REG(fp[ 7]),
+	FP_REG(fp[ 8]), FP_REG(fp[ 9]), FP_REG(fp[10]), FP_REG(fp[11]),
+	FP_REG(fp[12]), FP_REG(fp[13]), FP_REG(fp[14]), FP_REG(fp[15]),
+	FP_REG(fp[16]), FP_REG(fp[17]), FP_REG(fp[18]), FP_REG(fp[19]),
+	FP_REG(fp[20]), FP_REG(fp[21]), FP_REG(fp[22]), FP_REG(fp[23]),
+	FP_REG(fp[24]), FP_REG(fp[25]), FP_REG(fp[26]), FP_REG(fp[27]),
+	FP_REG(fp[28]), FP_REG(fp[29]), FP_REG(fp[30]), FP_REG(fp[31]),
 	PT_REG(	   pc)
 };
 
diff --git a/arch/alpha/kernel/rtc.c b/arch/alpha/kernel/rtc.c
index fb3025396ac9..cfdf90bc8b3f 100644
--- a/arch/alpha/kernel/rtc.c
+++ b/arch/alpha/kernel/rtc.c
@@ -80,7 +80,7 @@ init_rtc_epoch(void)
 static int
 alpha_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	int ret = mc146818_get_time(tm);
+	int ret = mc146818_get_time(tm, 10);
 
 	if (ret < 0) {
 		dev_err_ratelimited(dev, "unable to read current time\n");
diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c
index b4fbbba30aa2..bebdffafaee8 100644
--- a/arch/alpha/kernel/setup.c
+++ b/arch/alpha/kernel/setup.c
@@ -131,13 +131,14 @@ static void determine_cpu_caches (unsigned int);
 
 static char __initdata command_line[COMMAND_LINE_SIZE];
 
+#ifdef CONFIG_VGA_CONSOLE
 /*
  * The format of "screen_info" is strange, and due to early
  * i386-setup code. This is just enough to make the console
  * code think we're on a VGA color display.
  */
 
-struct screen_info screen_info = {
+struct screen_info vgacon_screen_info = {
 	.orig_x = 0,
 	.orig_y = 25,
 	.orig_video_cols = 80,
@@ -145,8 +146,7 @@ struct screen_info screen_info = {
 	.orig_video_isVGA = 1,
 	.orig_video_points = 16
 };
-
-EXPORT_SYMBOL(screen_info);
+#endif
 
 /*
  * The direct map I/O window, if any.  This should be the same
@@ -171,35 +171,22 @@ EXPORT_SYMBOL(__direct_map_size);
 	asm(".weak "#X)
 
 WEAK(alcor_mv);
-WEAK(alphabook1_mv);
-WEAK(avanti_mv);
-WEAK(cabriolet_mv);
 WEAK(clipper_mv);
 WEAK(dp264_mv);
 WEAK(eb164_mv);
-WEAK(eb64p_mv);
-WEAK(eb66_mv);
-WEAK(eb66p_mv);
 WEAK(eiger_mv);
-WEAK(jensen_mv);
 WEAK(lx164_mv);
-WEAK(lynx_mv);
 WEAK(marvel_ev7_mv);
 WEAK(miata_mv);
-WEAK(mikasa_mv);
 WEAK(mikasa_primo_mv);
 WEAK(monet_mv);
 WEAK(nautilus_mv);
-WEAK(noname_mv);
-WEAK(noritake_mv);
 WEAK(noritake_primo_mv);
-WEAK(p2k_mv);
 WEAK(pc164_mv);
 WEAK(privateer_mv);
 WEAK(rawhide_mv);
 WEAK(ruffian_mv);
 WEAK(rx164_mv);
-WEAK(sable_mv);
 WEAK(sable_gamma_mv);
 WEAK(shark_mv);
 WEAK(sx164_mv);
@@ -207,7 +194,6 @@ WEAK(takara_mv);
 WEAK(titan_mv);
 WEAK(webbrick_mv);
 WEAK(wildfire_mv);
-WEAK(xl_mv);
 WEAK(xlt_mv);
 
 #undef WEAK
@@ -224,7 +210,7 @@ static void __init
 reserve_std_resources(void)
 {
 	static struct resource standard_io_resources[] = {
-		{ .name = "rtc", .start = -1, .end = -1 },
+		{ .name = "rtc", .start = 0x70, .end =  0x7f},
         	{ .name = "dma1", .start = 0x00, .end = 0x1f },
         	{ .name = "pic1", .start = 0x20, .end = 0x3f },
         	{ .name = "timer", .start = 0x40, .end = 0x5f },
@@ -246,10 +232,6 @@ reserve_std_resources(void)
 			}
 	}
 
-	/* Fix up for the Jensen's queer RTC placement.  */
-	standard_io_resources[0].start = RTC_PORT(0);
-	standard_io_resources[0].end = RTC_PORT(0) + 0x0f;
-
 	for (i = 0; i < ARRAY_SIZE(standard_io_resources); ++i)
 		request_resource(io, standard_io_resources+i);
 }
@@ -385,8 +367,7 @@ setup_memory(void *kernel_end)
 #endif /* CONFIG_BLK_DEV_INITRD */
 }
 
-int __init
-page_is_ram(unsigned long pfn)
+int page_is_ram(unsigned long pfn)
 {
 	struct memclust_struct * cluster;
 	struct memdesc_struct * memdesc;
@@ -422,7 +403,7 @@ register_cpus(void)
 arch_initcall(register_cpus);
 
 #ifdef CONFIG_MAGIC_SYSRQ
-static void sysrq_reboot_handler(int unused)
+static void sysrq_reboot_handler(u8 unused)
 {
 	machine_halt();
 }
@@ -487,14 +468,7 @@ setup_arch(char **cmdline_p)
 	/* 
 	 * Locate the command line.
 	 */
-	/* Hack for Jensen... since we're restricted to 8 or 16 chars for
-	   boot flags depending on the boot mode, we need some shorthand.
-	   This should do for installation.  */
-	if (strcmp(COMMAND_LINE, "INSTALL") == 0) {
-		strlcpy(command_line, "root=/dev/fd0 load_ramdisk=1", sizeof command_line);
-	} else {
-		strlcpy(command_line, COMMAND_LINE, sizeof command_line);
-	}
+	strscpy(command_line, COMMAND_LINE, sizeof(command_line));
 	strcpy(boot_command_line, command_line);
 	*cmdline_p = command_line;
 
@@ -653,12 +627,12 @@ setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_VT
 #if defined(CONFIG_VGA_CONSOLE)
-	conswitchp = &vga_con;
+	vgacon_register_screen(&vgacon_screen_info);
 #endif
 #endif
 
 	/* Default root filesystem to sda2.  */
-	ROOT_DEV = Root_SDA2;
+	ROOT_DEV = MKDEV(SCSI_DISK0_MAJOR, 2);
 
 #ifdef CONFIG_EISA
 	/* FIXME:  only set this when we actually have EISA in this box? */
@@ -707,12 +681,6 @@ static int eb164_indices[] = {0,0,0,1,1,1,1,1,2,2,2,2,3,3,3,3,4};
 static char alcor_names[][16] = {"Alcor", "Maverick", "Bret"};
 static int alcor_indices[] = {0,0,0,1,1,1,0,0,0,0,0,0,2,2,2,2,2,2};
 
-static char eb64p_names[][16] = {"EB64+", "Cabriolet", "AlphaPCI64"};
-static int eb64p_indices[] = {0,0,1,2};
-
-static char eb66_names[][8] = {"EB66", "EB66+"};
-static int eb66_indices[] = {0,0,1};
-
 static char marvel_names[][16] = {
 	"Marvel/EV7"
 };
@@ -746,26 +714,26 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
 		NULL,		/* Ruby */
 		NULL,		/* Flamingo */
 		NULL,		/* Mannequin */
-		&jensen_mv,
+		NULL,		/* Jensens */
 		NULL, 		/* Pelican */
 		NULL,		/* Morgan */
 		NULL,		/* Sable -- see below.  */
 		NULL,		/* Medulla */
-		&noname_mv,
+		NULL,		/* Noname */
 		NULL,		/* Turbolaser */
-		&avanti_mv,
+		NULL,		/* Avanti */
 		NULL,		/* Mustang */
 		NULL,		/* Alcor, Bret, Maverick. HWRPB inaccurate? */
 		NULL,		/* Tradewind */
 		NULL,		/* Mikasa -- see below.  */
 		NULL,		/* EB64 */
-		NULL,		/* EB66 -- see variation.  */
-		NULL,		/* EB64+ -- see variation.  */
-		&alphabook1_mv,
+		NULL,		/* EB66 */
+		NULL,		/* EB64+ */
+		NULL,		/* Alphabook1 */
 		&rawhide_mv,
 		NULL,		/* K2 */
-		&lynx_mv,	/* Lynx */
-		&xl_mv,
+		NULL,		/* Lynx */
+		NULL,		/* XL */
 		NULL,		/* EB164 -- see variation.  */
 		NULL,		/* Noritake -- see below.  */
 		NULL,		/* Cortex */
@@ -804,19 +772,6 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
 		&eb164_mv, &pc164_mv, &lx164_mv, &sx164_mv, &rx164_mv
 	};
 
-	static struct alpha_machine_vector *eb64p_vecs[] __initdata =
-	{
-		&eb64p_mv,
-		&cabriolet_mv,
-		&cabriolet_mv		/* AlphaPCI64 */
-	};
-
-	static struct alpha_machine_vector *eb66_vecs[] __initdata =
-	{
-		&eb66_mv,
-		&eb66p_mv
-	};
-
 	static struct alpha_machine_vector *marvel_vecs[] __initdata =
 	{
 		&marvel_ev7_mv,
@@ -884,14 +839,6 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
 			if (vec == &eb164_mv && cpu == EV56_CPU)
 				vec = &pc164_mv;
 			break;
-		case ST_DEC_EB64P:
-			if (member < ARRAY_SIZE(eb64p_indices))
-				vec = eb64p_vecs[eb64p_indices[member]];
-			break;
-		case ST_DEC_EB66:
-			if (member < ARRAY_SIZE(eb66_indices))
-				vec = eb66_vecs[eb66_indices[member]];
-			break;
 		case ST_DEC_MARVEL:
 			if (member < ARRAY_SIZE(marvel_indices))
 				vec = marvel_vecs[marvel_indices[member]];
@@ -906,22 +853,13 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
 				vec = tsunami_vecs[tsunami_indices[member]];
 			break;
 		case ST_DEC_1000:
-			if (cpu == EV5_CPU || cpu == EV56_CPU)
-				vec = &mikasa_primo_mv;
-			else
-				vec = &mikasa_mv;
+			vec = &mikasa_primo_mv;
 			break;
 		case ST_DEC_NORITAKE:
-			if (cpu == EV5_CPU || cpu == EV56_CPU)
-				vec = &noritake_primo_mv;
-			else
-				vec = &noritake_mv;
+			vec = &noritake_primo_mv;
 			break;
 		case ST_DEC_2100_A500:
-			if (cpu == EV5_CPU || cpu == EV56_CPU)
-				vec = &sable_gamma_mv;
-			else
-				vec = &sable_mv;
+			vec = &sable_gamma_mv;
 			break;
 		}
 	}
@@ -934,41 +872,27 @@ get_sysvec_byname(const char *name)
 	static struct alpha_machine_vector *all_vecs[] __initdata =
 	{
 		&alcor_mv,
-		&alphabook1_mv,
-		&avanti_mv,
-		&cabriolet_mv,
 		&clipper_mv,
 		&dp264_mv,
 		&eb164_mv,
-		&eb64p_mv,
-		&eb66_mv,
-		&eb66p_mv,
 		&eiger_mv,
-		&jensen_mv,
 		&lx164_mv,
-		&lynx_mv,
 		&miata_mv,
-		&mikasa_mv,
 		&mikasa_primo_mv,
 		&monet_mv,
 		&nautilus_mv,
-		&noname_mv,
-		&noritake_mv,
 		&noritake_primo_mv,
-		&p2k_mv,
 		&pc164_mv,
 		&privateer_mv,
 		&rawhide_mv,
 		&ruffian_mv,
 		&rx164_mv,
-		&sable_mv,
 		&sable_gamma_mv,
 		&shark_mv,
 		&sx164_mv,
 		&takara_mv,
 		&webbrick_mv,
 		&wildfire_mv,
-		&xl_mv,
 		&xlt_mv
 	};
 
@@ -1030,14 +954,6 @@ get_sysnames(unsigned long type, unsigned long variation, unsigned long cpu,
 		if (member < ARRAY_SIZE(alcor_indices))
 			*variation_name = alcor_names[alcor_indices[member]];
 		break;
-	case ST_DEC_EB64P:
-		if (member < ARRAY_SIZE(eb64p_indices))
-			*variation_name = eb64p_names[eb64p_indices[member]];
-		break;
-	case ST_DEC_EB66:
-		if (member < ARRAY_SIZE(eb66_indices))
-			*variation_name = eb66_names[eb66_indices[member]];
-		break;
 	case ST_DEC_MARVEL:
 		if (member < ARRAY_SIZE(marvel_indices))
 			*variation_name = marvel_names[marvel_indices[member]];
diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index 6f47f256fe80..e62d1d461b1f 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -150,9 +150,10 @@ restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
 {
 	unsigned long usp;
 	struct switch_stack *sw = (struct switch_stack *)regs - 1;
-	long i, err = __get_user(regs->pc, &sc->sc_pc);
+	long err = __get_user(regs->pc, &sc->sc_pc);
 
 	current->restart_block.fn = do_no_restart_syscall;
+	current_thread_info()->status |= TS_SAVED_FP | TS_RESTORE_FP;
 
 	sw->r26 = (unsigned long) ret_from_sys_call;
 
@@ -189,9 +190,9 @@ restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
 	err |= __get_user(usp, sc->sc_regs+30);
 	wrusp(usp);
 
-	for (i = 0; i < 31; i++)
-		err |= __get_user(sw->fp[i], sc->sc_fpregs+i);
-	err |= __get_user(sw->fp[31], &sc->sc_fpcr);
+	err |= __copy_from_user(current_thread_info()->fp,
+				sc->sc_fpregs, 31 * 8);
+	err |= __get_user(current_thread_info()->fp[31], &sc->sc_fpcr);
 
 	return err;
 }
@@ -272,7 +273,7 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 		 unsigned long mask, unsigned long sp)
 {
 	struct switch_stack *sw = (struct switch_stack *)regs - 1;
-	long i, err = 0;
+	long err = 0;
 
 	err |= __put_user(on_sig_stack((unsigned long)sc), &sc->sc_onstack);
 	err |= __put_user(mask, &sc->sc_mask);
@@ -312,10 +313,10 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 	err |= __put_user(sp, sc->sc_regs+30);
 	err |= __put_user(0, sc->sc_regs+31);
 
-	for (i = 0; i < 31; i++)
-		err |= __put_user(sw->fp[i], sc->sc_fpregs+i);
+	err |= __copy_to_user(sc->sc_fpregs,
+			      current_thread_info()->fp, 31 * 8);
 	err |= __put_user(0, sc->sc_fpregs+31);
-	err |= __put_user(sw->fp[31], &sc->sc_fpcr);
+	err |= __put_user(current_thread_info()->fp[31], &sc->sc_fpcr);
 
 	err |= __put_user(regs->trap_a0, &sc->sc_traparg_a0);
 	err |= __put_user(regs->trap_a1, &sc->sc_traparg_a1);
@@ -528,6 +529,9 @@ do_work_pending(struct pt_regs *regs, unsigned long thread_flags,
 		} else {
 			local_irq_enable();
 			if (thread_flags & (_TIF_SIGPENDING|_TIF_NOTIFY_SIGNAL)) {
+				preempt_disable();
+				save_fpu();
+				preempt_enable();
 				do_signal(regs, r0, r19);
 				r0 = 0;
 			} else {
diff --git a/arch/alpha/kernel/smc37c669.c b/arch/alpha/kernel/smc37c669.c
index bbbd34586de0..a5a6ed97a6ce 100644
--- a/arch/alpha/kernel/smc37c669.c
+++ b/arch/alpha/kernel/smc37c669.c
@@ -11,6 +11,8 @@
 #include <asm/hwrpb.h>
 #include <asm/io.h>
 
+#include "proto.h"
+
 #if 0
 # define DBG_DEVS(args)         printk args
 #else
@@ -2430,13 +2432,15 @@ int __init smcc669_write( struct FILE *fp, int size, int number, unsigned char *
 }
 #endif
 
-void __init
+#if SMC_DEBUG
+static void __init
 SMC37c669_dump_registers(void)
 {
   int i;
   for (i = 0; i <= 0x29; i++)
     printk("-- CR%02x : %02x\n", i, SMC37c669_read_config(i));
 }
+#endif
 /*+
  * ============================================================================
  * = SMC_init - SMC37c669 Super I/O controller initialization                 =
diff --git a/arch/alpha/kernel/smc37c93x.c b/arch/alpha/kernel/smc37c93x.c
index 71cd7aca38ce..8028273f0d16 100644
--- a/arch/alpha/kernel/smc37c93x.c
+++ b/arch/alpha/kernel/smc37c93x.c
@@ -12,6 +12,8 @@
 #include <asm/hwrpb.h>
 #include <asm/io.h>
 
+#include "proto.h"
+
 #define SMC_DEBUG 0
 
 #if SMC_DEBUG
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index f4e20f75438f..ed06367ece57 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -38,6 +38,7 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
 
 #include "proto.h"
 #include "irq_impl.h"
@@ -467,11 +468,6 @@ smp_prepare_cpus(unsigned int max_cpus)
 	smp_num_cpus = smp_num_probed;
 }
 
-void
-smp_prepare_boot_cpu(void)
-{
-}
-
 int
 __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
@@ -562,7 +558,7 @@ handle_ipi(struct pt_regs *regs)
 }
 
 void
-smp_send_reschedule(int cpu)
+arch_smp_send_reschedule(int cpu)
 {
 #ifdef DEBUG_IPI_MSG
 	if (cpu == hard_smp_processor_id())
@@ -628,7 +624,7 @@ flush_tlb_all(void)
 static void
 ipi_flush_tlb_mm(void *x)
 {
-	struct mm_struct *mm = (struct mm_struct *) x;
+	struct mm_struct *mm = x;
 	if (mm == current->active_mm && !asn_locked())
 		flush_tlb_current(mm);
 	else
@@ -670,7 +666,7 @@ struct flush_tlb_page_struct {
 static void
 ipi_flush_tlb_page(void *x)
 {
-	struct flush_tlb_page_struct *data = (struct flush_tlb_page_struct *)x;
+	struct flush_tlb_page_struct *data = x;
 	struct mm_struct * mm = data->mm;
 
 	if (mm == current->active_mm && !asn_locked())
diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c
index 6dc952b0df4a..d19e51ec711d 100644
--- a/arch/alpha/kernel/srmcons.c
+++ b/arch/alpha/kernel/srmcons.c
@@ -21,6 +21,8 @@
 #include <asm/console.h>
 #include <linux/uaccess.h>
 
+#include "proto.h"
+
 
 static DEFINE_SPINLOCK(srmcons_callback_lock);
 static int srm_is_registered_console = 0;
@@ -53,7 +55,7 @@ srmcons_do_receive_chars(struct tty_port *port)
 	do {
 		result.as_long = callback_getc(0);
 		if (result.bits.status < 2) {
-			tty_insert_flip_char(port, (char)result.bits.c, 0);
+			tty_insert_flip_char(port, (u8)result.bits.c, 0);
 			count++;
 		}
 	} while((result.bits.status & 1) && (++loops < 10));
@@ -67,7 +69,8 @@ srmcons_do_receive_chars(struct tty_port *port)
 static void
 srmcons_receive_chars(struct timer_list *t)
 {
-	struct srmcons_private *srmconsp = from_timer(srmconsp, t, timer);
+	struct srmcons_private *srmconsp = timer_container_of(srmconsp, t,
+							      timer);
 	struct tty_port *port = &srmconsp->port;
 	unsigned long flags;
 	int incr = 10;
@@ -88,30 +91,27 @@ srmcons_receive_chars(struct timer_list *t)
 }
 
 /* called with callback_lock held */
-static int
-srmcons_do_write(struct tty_port *port, const char *buf, int count)
+static void
+srmcons_do_write(struct tty_port *port, const u8 *buf, size_t count)
 {
-	static char str_cr[1] = "\r";
-	long c, remaining = count;
+	size_t c;
 	srmcons_result result;
-	char *cur;
-	int need_cr;
 
-	for (cur = (char *)buf; remaining > 0; ) {
-		need_cr = 0;
+	while (count > 0) {
+		bool need_cr = false;
 		/* 
 		 * Break it up into reasonable size chunks to allow a chance
 		 * for input to get in
 		 */
-		for (c = 0; c < min_t(long, 128L, remaining) && !need_cr; c++)
-			if (cur[c] == '\n')
-				need_cr = 1;
+		for (c = 0; c < min_t(size_t, 128U, count) && !need_cr; c++)
+			if (buf[c] == '\n')
+				need_cr = true;
 		
 		while (c > 0) {
-			result.as_long = callback_puts(0, cur, c);
+			result.as_long = callback_puts(0, buf, c);
 			c -= result.bits.c;
-			remaining -= result.bits.c;
-			cur += result.bits.c;
+			count -= result.bits.c;
+			buf += result.bits.c;
 
 			/*
 			 * Check for pending input iff a tty port was provided
@@ -121,22 +121,20 @@ srmcons_do_write(struct tty_port *port, const char *buf, int count)
 		}
 
 		while (need_cr) {
-			result.as_long = callback_puts(0, str_cr, 1);
+			result.as_long = callback_puts(0, "\r", 1);
 			if (result.bits.c > 0)
-				need_cr = 0;
+				need_cr = false;
 		}
 	}
-	return count;
 }
 
-static int
-srmcons_write(struct tty_struct *tty,
-	      const unsigned char *buf, int count)
+static ssize_t
+srmcons_write(struct tty_struct *tty, const u8 *buf, size_t count)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&srmcons_callback_lock, flags);
-	srmcons_do_write(tty->port, (const char *) buf, count);
+	srmcons_do_write(tty->port, buf, count);
 	spin_unlock_irqrestore(&srmcons_callback_lock, flags);
 
 	return count;
@@ -180,7 +178,7 @@ srmcons_close(struct tty_struct *tty, struct file *filp)
 
 	if (tty->count == 1) {
 		port->tty = NULL;
-		del_timer(&srmconsp->timer);
+		timer_delete(&srmconsp->timer);
 	}
 
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -199,40 +197,44 @@ static const struct tty_operations srmcons_ops = {
 static int __init
 srmcons_init(void)
 {
+	struct tty_driver *driver;
+	int err;
+
 	timer_setup(&srmcons_singleton.timer, srmcons_receive_chars, 0);
-	if (srm_is_registered_console) {
-		struct tty_driver *driver;
-		int err;
-
-		driver = tty_alloc_driver(MAX_SRM_CONSOLE_DEVICES, 0);
-		if (IS_ERR(driver))
-			return PTR_ERR(driver);
-
-		tty_port_init(&srmcons_singleton.port);
-
-		driver->driver_name = "srm";
-		driver->name = "srm";
-		driver->major = 0; 	/* dynamic */
-		driver->minor_start = 0;
-		driver->type = TTY_DRIVER_TYPE_SYSTEM;
-		driver->subtype = SYSTEM_TYPE_SYSCONS;
-		driver->init_termios = tty_std_termios;
-		tty_set_operations(driver, &srmcons_ops);
-		tty_port_link_device(&srmcons_singleton.port, driver, 0);
-		err = tty_register_driver(driver);
-		if (err) {
-			tty_driver_kref_put(driver);
-			tty_port_destroy(&srmcons_singleton.port);
-			return err;
-		}
-		srmcons_driver = driver;
-	}
 
-	return -ENODEV;
+	if (!srm_is_registered_console)
+		return -ENODEV;
+
+	driver = tty_alloc_driver(MAX_SRM_CONSOLE_DEVICES, 0);
+	if (IS_ERR(driver))
+		return PTR_ERR(driver);
+
+	tty_port_init(&srmcons_singleton.port);
+
+	driver->driver_name = "srm";
+	driver->name = "srm";
+	driver->major = 0;	/* dynamic */
+	driver->minor_start = 0;
+	driver->type = TTY_DRIVER_TYPE_SYSTEM;
+	driver->subtype = SYSTEM_TYPE_SYSCONS;
+	driver->init_termios = tty_std_termios;
+	tty_set_operations(driver, &srmcons_ops);
+	tty_port_link_device(&srmcons_singleton.port, driver, 0);
+	err = tty_register_driver(driver);
+	if (err)
+		goto err_free_drv;
+
+	srmcons_driver = driver;
+
+	return 0;
+err_free_drv:
+	tty_driver_kref_put(driver);
+	tty_port_destroy(&srmcons_singleton.port);
+
+	return err;
 }
 device_initcall(srmcons_init);
 
-
 /*
  * The console driver
  */
diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c
index 47459b73cdb7..54e75d4fdbe3 100644
--- a/arch/alpha/kernel/sys_cabriolet.c
+++ b/arch/alpha/kernel/sys_cabriolet.c
@@ -6,8 +6,7 @@
  *	Copyright (C) 1996 Jay A Estabrook
  *	Copyright (C) 1998, 1999, 2000 Richard Henderson
  *
- * Code supporting the Cabriolet (AlphaPC64), EB66+, and EB164,
- * PC164 and LX164.
+ * Code supporting the PC164 and LX164.
  */
 
 #include <linux/kernel.h>
@@ -23,9 +22,7 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/core_apecs.h>
 #include <asm/core_cia.h>
-#include <asm/core_lca.h>
 #include <asm/tlbflush.h>
 
 #include "proto.h"
@@ -233,13 +230,6 @@ cabriolet_enable_ide(void)
 }
 
 static inline void __init
-cabriolet_init_pci(void)
-{
-	common_init_pci();
-	cabriolet_enable_ide();
-}
-
-static inline void __init
 cia_cab_init_pci(void)
 {
 	cia_init_pci();
@@ -317,81 +307,6 @@ alphapc164_init_pci(void)
  * The System Vector
  */
 
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
-struct alpha_machine_vector cabriolet_mv __initmv = {
-	.vector_name		= "Cabriolet",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 35,
-	.device_interrupt	= cabriolet_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= cabriolet_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= cabriolet_init_pci,
-	.pci_map_irq		= cabriolet_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-#ifndef CONFIG_ALPHA_EB64P
-ALIAS_MV(cabriolet)
-#endif
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB164)
-struct alpha_machine_vector eb164_mv __initmv = {
-	.vector_name		= "EB164",
-	DO_EV5_MMU,
-	DO_DEFAULT_RTC,
-	DO_CIA_IO,
-	.machine_check		= cia_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 35,
-	.device_interrupt	= cabriolet_device_interrupt,
-
-	.init_arch		= cia_init_arch,
-	.init_irq		= cabriolet_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= cia_cab_init_pci,
-	.kill_arch		= cia_kill_arch,
-	.pci_map_irq		= cabriolet_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb164)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66P)
-struct alpha_machine_vector eb66p_mv __initmv = {
-	.vector_name		= "EB66+",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 35,
-	.device_interrupt	= cabriolet_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= cabriolet_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= cabriolet_init_pci,
-	.pci_map_irq		= eb66p_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb66p)
-#endif
-
 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LX164)
 struct alpha_machine_vector lx164_mv __initmv = {
 	.vector_name		= "LX164",
diff --git a/arch/alpha/kernel/sys_eb64p.c b/arch/alpha/kernel/sys_eb64p.c
deleted file mode 100644
index 3c43fd347526..000000000000
--- a/arch/alpha/kernel/sys_eb64p.c
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/sys_eb64p.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the EB64+ and EB66.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#include <asm/core_lca.h>
-#include <asm/hwrpb.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/* Note mask bit is true for DISABLED irqs.  */
-static unsigned int cached_irq_mask = -1;
-
-static inline void
-eb64p_update_irq_hw(unsigned int irq, unsigned long mask)
-{
-	outb(mask >> (irq >= 24 ? 24 : 16), (irq >= 24 ? 0x27 : 0x26));
-}
-
-static inline void
-eb64p_enable_irq(struct irq_data *d)
-{
-	eb64p_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
-}
-
-static void
-eb64p_disable_irq(struct irq_data *d)
-{
-	eb64p_update_irq_hw(d->irq, cached_irq_mask |= 1 << d->irq);
-}
-
-static struct irq_chip eb64p_irq_type = {
-	.name		= "EB64P",
-	.irq_unmask	= eb64p_enable_irq,
-	.irq_mask	= eb64p_disable_irq,
-	.irq_mask_ack	= eb64p_disable_irq,
-};
-
-static void 
-eb64p_device_interrupt(unsigned long vector)
-{
-	unsigned long pld;
-	unsigned int i;
-
-	/* Read the interrupt summary registers */
-	pld = inb(0x26) | (inb(0x27) << 8);
-
-	/*
-	 * Now, for every possible bit set, work through
-	 * them and call the appropriate interrupt handler.
-	 */
-	while (pld) {
-		i = ffz(~pld);
-		pld &= pld - 1;	/* clear least bit set */
-
-		if (i == 5) {
-			isa_device_interrupt(vector);
-		} else {
-			handle_irq(16 + i);
-		}
-	}
-}
-
-static void __init
-eb64p_init_irq(void)
-{
-	long i;
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
-	/*
-	 * CABRIO SRM may not set variation correctly, so here we test
-	 * the high word of the interrupt summary register for the RAZ
-	 * bits, and hope that a true EB64+ would read all ones...
-	 */
-	if (inw(0x806) != 0xffff) {
-		extern struct alpha_machine_vector cabriolet_mv;
-
-		printk("Detected Cabriolet: correcting HWRPB.\n");
-
-		hwrpb->sys_variation |= 2L << 10;
-		hwrpb_update_checksum(hwrpb);
-
-		alpha_mv = cabriolet_mv;
-		alpha_mv.init_irq();
-		return;
-	}
-#endif /* GENERIC */
-
-	outb(0xff, 0x26);
-	outb(0xff, 0x27);
-
-	init_i8259a_irqs();
-
-	for (i = 16; i < 32; ++i) {
-		irq_set_chip_and_handler(i, &eb64p_irq_type, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-
-	common_init_isa_dma();
-	if (request_irq(16 + 5, no_action, 0, "isa-cascade", NULL))
-		pr_err("Failed to register isa-cascade interrupt\n");
-}
-
-/*
- * PCI Fixup configuration.
- *
- * There are two 8 bit external summary registers as follows:
- *
- * Summary @ 0x26:
- * Bit      Meaning
- * 0        Interrupt Line A from slot 0
- * 1        Interrupt Line A from slot 1
- * 2        Interrupt Line B from slot 0
- * 3        Interrupt Line B from slot 1
- * 4        Interrupt Line C from slot 0
- * 5        Interrupt line from the two ISA PICs
- * 6        Tulip
- * 7        NCR SCSI
- *
- * Summary @ 0x27
- * Bit      Meaning
- * 0        Interrupt Line C from slot 1
- * 1        Interrupt Line D from slot 0
- * 2        Interrupt Line D from slot 1
- * 3        RAZ
- * 4        RAZ
- * 5        RAZ
- * 6        RAZ
- * 7        RAZ
- *
- * The device to slot mapping looks like:
- *
- * Slot     Device
- *  5       NCR SCSI controller
- *  6       PCI on board slot 0
- *  7       PCI on board slot 1
- *  8       Intel SIO PCI-ISA bridge chip
- *  9       Tulip - DECchip 21040 Ethernet controller
- *   
- *
- * This two layered interrupt approach means that we allocate IRQ 16 and 
- * above for PCI interrupts.  The IRQ relates to which bit the interrupt
- * comes in on.  This makes interrupt processing much easier.
- */
-
-static int
-eb64p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[5][5] = {
-		/*INT  INTA  INTB  INTC   INTD */
-		{16+7, 16+7, 16+7, 16+7,  16+7},  /* IdSel 5,  slot ?, ?? */
-		{16+0, 16+0, 16+2, 16+4,  16+9},  /* IdSel 6,  slot ?, ?? */
-		{16+1, 16+1, 16+3, 16+8, 16+10},  /* IdSel 7,  slot ?, ?? */
-		{  -1,   -1,   -1,   -1,    -1},  /* IdSel 8,  SIO */
-		{16+6, 16+6, 16+6, 16+6,  16+6},  /* IdSel 9,  TULIP */
-	};
-	const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-
-/*
- * The System Vector
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB64P)
-struct alpha_machine_vector eb64p_mv __initmv = {
-	.vector_name		= "EB64+",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 32,
-	.device_interrupt	= eb64p_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= eb64p_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.kill_arch		= NULL,
-	.pci_map_irq		= eb64p_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb64p)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66)
-struct alpha_machine_vector eb66_mv __initmv = {
-	.vector_name		= "EB66",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 32,
-	.device_interrupt	= eb64p_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= eb64p_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.pci_map_irq		= eb64p_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb66)
-#endif
diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c
deleted file mode 100644
index 5c9c88428124..000000000000
--- a/arch/alpha/kernel/sys_jensen.c
+++ /dev/null
@@ -1,237 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/sys_jensen.c
- *
- *	Copyright (C) 1995 Linus Torvalds
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the Jensen.
- */
-#define __EXTERN_INLINE
-#include <asm/io.h>
-#include <asm/jensen.h>
-#undef  __EXTERN_INLINE
-
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/*
- * Jensen is special: the vector is 0x8X0 for EISA interrupt X, and
- * 0x9X0 for the local motherboard interrupts.
- *
- * Note especially that those local interrupts CANNOT be masked,
- * which causes much of the pain below...
- *
- *	0x660 - NMI
- *
- *	0x800 - IRQ0  interval timer (not used, as we use the RTC timer)
- *	0x810 - IRQ1  line printer (duh..)
- *	0x860 - IRQ6  floppy disk
- *
- *	0x900 - COM1
- *	0x920 - COM2
- *	0x980 - keyboard
- *	0x990 - mouse
- *
- * PCI-based systems are more sane: they don't have the local
- * interrupts at all, and have only normal PCI interrupts from
- * devices.  Happily it's easy enough to do a sane mapping from the
- * Jensen.
- * 
- * Note that this means that we may have to do a hardware
- * "local_op" to a different interrupt than we report to the rest of the
- * world.
- */
-
-static void
-jensen_local_enable(struct irq_data *d)
-{
-	/* the parport is really hw IRQ 1, silly Jensen.  */
-	if (d->irq == 7)
-		i8259a_enable_irq(d);
-}
-
-static void
-jensen_local_disable(struct irq_data *d)
-{
-	/* the parport is really hw IRQ 1, silly Jensen.  */
-	if (d->irq == 7)
-		i8259a_disable_irq(d);
-}
-
-static void
-jensen_local_mask_ack(struct irq_data *d)
-{
-	/* the parport is really hw IRQ 1, silly Jensen.  */
-	if (d->irq == 7)
-		i8259a_mask_and_ack_irq(d);
-}
-
-static struct irq_chip jensen_local_irq_type = {
-	.name		= "LOCAL",
-	.irq_unmask	= jensen_local_enable,
-	.irq_mask	= jensen_local_disable,
-	.irq_mask_ack	= jensen_local_mask_ack,
-};
-
-static void 
-jensen_device_interrupt(unsigned long vector)
-{
-	int irq;
-
-	switch (vector) {
-	case 0x660:
-		printk("Whee.. NMI received. Probable hardware error\n");
-		printk("61=%02x, 461=%02x\n", inb(0x61), inb(0x461));
-		return;
-
-	/* local device interrupts: */
-	case 0x900: irq = 4; break;		/* com1 -> irq 4 */
-	case 0x920: irq = 3; break;		/* com2 -> irq 3 */
-	case 0x980: irq = 1; break;		/* kbd -> irq 1 */
-	case 0x990: irq = 9; break;		/* mouse -> irq 9 */
-
-	default:
-		if (vector > 0x900) {
-			printk("Unknown local interrupt %lx\n", vector);
-			return;
-		}
-
-		irq = (vector - 0x800) >> 4;
-		if (irq == 1)
-			irq = 7;
-		break;
-	}
-
-	/* If there is no handler yet... */
-	if (!irq_has_action(irq)) {
-	    /* If it is a local interrupt that cannot be masked... */
-	    if (vector >= 0x900)
-	    {
-	        /* Clear keyboard/mouse state */
-	    	inb(0x64);
-		inb(0x60);
-		/* Reset serial ports */
-		inb(0x3fa);
-		inb(0x2fa);
-		outb(0x0c, 0x3fc);
-		outb(0x0c, 0x2fc);
-		/* Clear NMI */
-		outb(0,0x61);
-		outb(0,0x461);
-	    }
-	}
-
-#if 0
-        /* A useful bit of code to find out if an interrupt is going wild.  */
-        {
-          static unsigned int last_msg = 0, last_cc = 0;
-          static int last_irq = -1, count = 0;
-          unsigned int cc;
-
-          __asm __volatile("rpcc %0" : "=r"(cc));
-          ++count;
-#define JENSEN_CYCLES_PER_SEC	(150000000)
-          if (cc - last_msg > ((JENSEN_CYCLES_PER_SEC) * 3) ||
-	      irq != last_irq) {
-                printk(KERN_CRIT " irq %d count %d cc %u @ %lx\n",
-                       irq, count, cc-last_cc, get_irq_regs()->pc);
-                count = 0;
-                last_msg = cc;
-                last_irq = irq;
-          }
-          last_cc = cc;
-        }
-#endif
-
-	handle_irq(irq);
-}
-
-static void __init
-jensen_init_irq(void)
-{
-	init_i8259a_irqs();
-
-	irq_set_chip_and_handler(1, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(4, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(3, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(7, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(9, &jensen_local_irq_type, handle_level_irq);
-
-	common_init_isa_dma();
-}
-
-static void __init
-jensen_init_arch(void)
-{
-	struct pci_controller *hose;
-#ifdef CONFIG_PCI
-	static struct pci_dev fake_isa_bridge = { .dma_mask = 0xffffffffUL, };
-
-	isa_bridge = &fake_isa_bridge;
-#endif
-
-	/* Create a hose so that we can report i/o base addresses to
-	   userland.  */
-
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
-	hose->index = 0;
-
-	hose->sparse_mem_base = EISA_MEM - IDENT_ADDR;
-	hose->dense_mem_base = 0;
-	hose->sparse_io_base = EISA_IO - IDENT_ADDR;
-	hose->dense_io_base = 0;
-
-	hose->sg_isa = hose->sg_pci = NULL;
-	__direct_map_base = 0;
-	__direct_map_size = 0xffffffff;
-}
-
-static void
-jensen_machine_check(unsigned long vector, unsigned long la)
-{
-	printk(KERN_CRIT "Machine check\n");
-}
-
-/*
- * The System Vector
- */
-
-struct alpha_machine_vector jensen_mv __initmv = {
-	.vector_name		= "Jensen",
-	DO_EV4_MMU,
-	IO_LITE(JENSEN,jensen),
-	.machine_check		= jensen_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.rtc_port		= 0x170,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= jensen_device_interrupt,
-
-	.init_arch		= jensen_init_arch,
-	.init_irq		= jensen_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= NULL,
-	.kill_arch		= NULL,
-};
-ALIAS_MV(jensen)
diff --git a/arch/alpha/kernel/sys_miata.c b/arch/alpha/kernel/sys_miata.c
index e1bee8f84c58..33b2798de8fc 100644
--- a/arch/alpha/kernel/sys_miata.c
+++ b/arch/alpha/kernel/sys_miata.c
@@ -183,16 +183,17 @@ miata_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
            the 2nd 8259 controller. So we have to check for it first. */
 
 	if((slot == 7) && (PCI_FUNC(dev->devfn) == 3)) {
-		u8 irq=0;
 		struct pci_dev *pdev = pci_get_slot(dev->bus, dev->devfn & ~7);
-		if(pdev == NULL || pci_read_config_byte(pdev, 0x40,&irq) != PCIBIOS_SUCCESSFUL) {
-			pci_dev_put(pdev);
+		u8 irq = 0;
+		int ret;
+
+		if (!pdev)
 			return -1;
-		}
-		else	{
-			pci_dev_put(pdev);
-			return irq;
-		}
+
+		ret = pci_read_config_byte(pdev, 0x40, &irq);
+		pci_dev_put(pdev);
+
+		return ret == PCIBIOS_SUCCESSFUL ? irq : -1;
 	}
 
 	return COMMON_TABLE_LOOKUP;
diff --git a/arch/alpha/kernel/sys_mikasa.c b/arch/alpha/kernel/sys_mikasa.c
index 7690dfd57cb6..557802398231 100644
--- a/arch/alpha/kernel/sys_mikasa.c
+++ b/arch/alpha/kernel/sys_mikasa.c
@@ -23,7 +23,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/core_apecs.h>
 #include <asm/core_cia.h>
 #include <asm/tlbflush.h>
 
@@ -164,64 +163,9 @@ mikasa_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-static void
-mikasa_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-#define MCHK_NO_DEVSEL 0x205U
-#define MCHK_NO_TABT 0x204U
-
-	struct el_common *mchk_header;
-	unsigned int code;
-
-	mchk_header = (struct el_common *)la_ptr;
-
-	/* Clear the error before any reporting.  */
-	mb();
-	mb(); /* magic */
-	draina();
-	apecs_pci_clr_err();
-	wrmces(0x7);
-	mb();
-
-	code = mchk_header->code;
-	process_mcheck_info(vector, la_ptr, "MIKASA APECS",
-			    (mcheck_expected(0)
-			     && (code == MCHK_NO_DEVSEL
-			         || code == MCHK_NO_TABT)));
-}
-#endif
-
-
 /*
  * The System Vector
  */
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-struct alpha_machine_vector mikasa_mv __initmv = {
-	.vector_name		= "Mikasa",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= mikasa_apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 32,
-	.device_interrupt	= mikasa_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= mikasa_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.pci_map_irq		= mikasa_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(mikasa)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
 struct alpha_machine_vector mikasa_primo_mv __initmv = {
 	.vector_name		= "Mikasa-Primo",
 	DO_EV5_MMU,
@@ -244,4 +188,3 @@ struct alpha_machine_vector mikasa_primo_mv __initmv = {
 	.pci_swizzle		= common_swizzle,
 };
 ALIAS_MV(mikasa_primo)
-#endif
diff --git a/arch/alpha/kernel/sys_nautilus.c b/arch/alpha/kernel/sys_nautilus.c
index 96fd6ff3fe81..13b79960b4b9 100644
--- a/arch/alpha/kernel/sys_nautilus.c
+++ b/arch/alpha/kernel/sys_nautilus.c
@@ -78,7 +78,7 @@ nautilus_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return irq;
 }
 
-void
+static void
 nautilus_kill_arch(int mode)
 {
 	struct pci_bus *bus = pci_isa_hose->bus;
@@ -127,7 +127,7 @@ naut_sys_machine_check(unsigned long vector, unsigned long la_ptr,
 /* Machine checks can come from two sources - those on the CPU and those
    in the system.  They are analysed separately but all starts here.  */
 
-void
+static void
 nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	char *mchk_class;
@@ -184,8 +184,6 @@ nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
 	mb();
 }
 
-extern void pcibios_claim_one_bus(struct pci_bus *);
-
 static struct resource irongate_mem = {
 	.name	= "Irongate PCI MEM",
 	.flags	= IORESOURCE_MEM,
@@ -197,7 +195,7 @@ static struct resource busn_resource = {
 	.flags	= IORESOURCE_BUS,
 };
 
-void __init
+static void __init
 nautilus_init_pci(void)
 {
 	struct pci_controller *hose = hose_head;
diff --git a/arch/alpha/kernel/sys_noritake.c b/arch/alpha/kernel/sys_noritake.c
index 47f3ce4f719a..eed3f16561c0 100644
--- a/arch/alpha/kernel/sys_noritake.c
+++ b/arch/alpha/kernel/sys_noritake.c
@@ -24,7 +24,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/core_apecs.h>
 #include <asm/core_cia.h>
 #include <asm/tlbflush.h>
 
@@ -253,64 +252,6 @@ noritake_swizzle(struct pci_dev *dev, u8 *pinp)
 	return slot;
 }
 
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-static void
-noritake_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-#define MCHK_NO_DEVSEL 0x205U
-#define MCHK_NO_TABT 0x204U
-
-        struct el_common *mchk_header;
-        unsigned int code;
-
-        mchk_header = (struct el_common *)la_ptr;
-
-        /* Clear the error before any reporting.  */
-        mb();
-        mb(); /* magic */
-        draina();
-        apecs_pci_clr_err();
-        wrmces(0x7);
-        mb();
-
-        code = mchk_header->code;
-        process_mcheck_info(vector, la_ptr, "NORITAKE APECS",
-                            (mcheck_expected(0)
-                             && (code == MCHK_NO_DEVSEL
-                                 || code == MCHK_NO_TABT)));
-}
-#endif
-
-
-/*
- * The System Vectors
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-struct alpha_machine_vector noritake_mv __initmv = {
-	.vector_name		= "Noritake",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= noritake_apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 48,
-	.device_interrupt	= noritake_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= noritake_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.pci_map_irq		= noritake_map_irq,
-	.pci_swizzle		= noritake_swizzle,
-};
-ALIAS_MV(noritake)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
 struct alpha_machine_vector noritake_primo_mv __initmv = {
 	.vector_name		= "Noritake-Primo",
 	DO_EV5_MMU,
@@ -333,4 +274,3 @@ struct alpha_machine_vector noritake_primo_mv __initmv = {
 	.pci_swizzle		= noritake_swizzle,
 };
 ALIAS_MV(noritake_primo)
-#endif
diff --git a/arch/alpha/kernel/sys_sable.c b/arch/alpha/kernel/sys_sable.c
index 930005b2f630..49f5c75134ec 100644
--- a/arch/alpha/kernel/sys_sable.c
+++ b/arch/alpha/kernel/sys_sable.c
@@ -212,232 +212,6 @@ sable_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 #endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE) */
 
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
-
-/***********************************************************************/
-/* LYNX hardware specifics
- */
-/*
- *   For LYNX, which is also baroque, we manage 64 IRQs, via a custom IC.
- *
- * Bit      Meaning               Kernel IRQ
- *------------------------------------------
- * 0        
- * 1        
- * 2        
- * 3        mouse			12
- * 4        
- * 5        
- * 6        keyboard			1
- * 7        floppy			6
- * 8        COM2			3
- * 9        parallel port		7
- *10        EISA irq 3			-
- *11        EISA irq 4			-
- *12        EISA irq 5			5
- *13        EISA irq 6			-
- *14        EISA irq 7			-
- *15        COM1			4
- *16        EISA irq 9			9
- *17        EISA irq 10			10
- *18        EISA irq 11			11
- *19        EISA irq 12			-
- *20        
- *21        EISA irq 14			14
- *22        EISA irq 15			15
- *23        IIC				-
- *24        VGA (builtin)               -
- *25
- *26
- *27
- *28        NCR810 (builtin)		28
- *29
- *30
- *31
- *32        PCI 0 slot 4 A primary bus  32
- *33        PCI 0 slot 4 B primary bus  33
- *34        PCI 0 slot 4 C primary bus  34
- *35        PCI 0 slot 4 D primary bus
- *36        PCI 0 slot 5 A primary bus
- *37        PCI 0 slot 5 B primary bus
- *38        PCI 0 slot 5 C primary bus
- *39        PCI 0 slot 5 D primary bus
- *40        PCI 0 slot 6 A primary bus
- *41        PCI 0 slot 6 B primary bus
- *42        PCI 0 slot 6 C primary bus
- *43        PCI 0 slot 6 D primary bus
- *44        PCI 0 slot 7 A primary bus
- *45        PCI 0 slot 7 B primary bus
- *46        PCI 0 slot 7 C primary bus
- *47        PCI 0 slot 7 D primary bus
- *48        PCI 0 slot 0 A secondary bus
- *49        PCI 0 slot 0 B secondary bus
- *50        PCI 0 slot 0 C secondary bus
- *51        PCI 0 slot 0 D secondary bus
- *52        PCI 0 slot 1 A secondary bus
- *53        PCI 0 slot 1 B secondary bus
- *54        PCI 0 slot 1 C secondary bus
- *55        PCI 0 slot 1 D secondary bus
- *56        PCI 0 slot 2 A secondary bus
- *57        PCI 0 slot 2 B secondary bus
- *58        PCI 0 slot 2 C secondary bus
- *59        PCI 0 slot 2 D secondary bus
- *60        PCI 0 slot 3 A secondary bus
- *61        PCI 0 slot 3 B secondary bus
- *62        PCI 0 slot 3 C secondary bus
- *63        PCI 0 slot 3 D secondary bus
- */
-
-static void
-lynx_update_irq_hw(unsigned long bit, unsigned long mask)
-{
-	/*
-	 * Write the AIR register on the T3/T4 with the
-	 * address of the IC mask register (offset 0x40)
-	 */
-	*(vulp)T2_AIR = 0x40;
-	mb();
-	*(vulp)T2_AIR; /* re-read to force write */
-	mb();
-	*(vulp)T2_DIR = mask;    
-	mb();
-	mb();
-}
-
-static void
-lynx_ack_irq_hw(unsigned long bit)
-{
-	*(vulp)T2_VAR = (u_long) bit;
-	mb();
-	mb();
-}
-
-static irq_swizzle_t lynx_irq_swizzle = {
-	{ /* irq_to_mask */
-		-1,  6, -1,  8, 15, 12,  7,  9,	/* pseudo PIC  0-7  */
-		-1, 16, 17, 18,  3, -1, 21, 22,	/* pseudo PIC  8-15 */
-		-1, -1, -1, -1, -1, -1, -1, -1,	/* pseudo */
-		-1, -1, -1, -1, 28, -1, -1, -1,	/* pseudo */
-		32, 33, 34, 35, 36, 37, 38, 39,	/* mask 32-39 */
-		40, 41, 42, 43, 44, 45, 46, 47,	/* mask 40-47 */
-		48, 49, 50, 51, 52, 53, 54, 55,	/* mask 48-55 */
-		56, 57, 58, 59, 60, 61, 62, 63	/* mask 56-63 */
-	},
-	{ /* mask_to_irq */
-		-1, -1, -1, 12, -1, -1,  1,  6,	/* mask 0-7   */
-		 3,  7, -1, -1,  5, -1, -1,  4,	/* mask 8-15  */
-		 9, 10, 11, -1, -1, 14, 15, -1,	/* mask 16-23 */
-		-1, -1, -1, -1, 28, -1, -1, -1,	/* mask 24-31 */
-		32, 33, 34, 35, 36, 37, 38, 39,	/* mask 32-39 */
-		40, 41, 42, 43, 44, 45, 46, 47,	/* mask 40-47 */
-		48, 49, 50, 51, 52, 53, 54, 55,	/* mask 48-55 */
-		56, 57, 58, 59, 60, 61, 62, 63	/* mask 56-63 */
-	},
-	-1,
-	lynx_update_irq_hw,
-	lynx_ack_irq_hw
-};
-
-static void __init
-lynx_init_irq(void)
-{
-	sable_lynx_irq_swizzle = &lynx_irq_swizzle;
-	sable_lynx_init_irq(64);
-}
-
-/*
- * PCI Fixup configuration for ALPHA LYNX (2100A)
- *
- * The device to slot mapping looks like:
- *
- * Slot     Device
- *  0       none
- *  1       none
- *  2       PCI-EISA bridge
- *  3       PCI-PCI bridge
- *  4       NCR 810 (Demi-Lynx only)
- *  5       none
- *  6       PCI on board slot 4
- *  7       PCI on board slot 5
- *  8       PCI on board slot 6
- *  9       PCI on board slot 7
- *
- * And behind the PPB we have:
- *
- * 11       PCI on board slot 0
- * 12       PCI on board slot 1
- * 13       PCI on board slot 2
- * 14       PCI on board slot 3
- */
-/*
- * NOTE: the IRQ assignments below are arbitrary, but need to be consistent
- * with the values in the irq swizzling tables above.
- */
-
-static int
-lynx_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[19][5] = {
-		/*INT    INTA   INTB   INTC   INTD */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 13,  PCEB   */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 14,  PPB    */
-		{   28,    28,    28,    28,    28},  /* IdSel 15,  NCR demi */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 16,  none   */
-		{   32,    32,    33,    34,    35},  /* IdSel 17,  slot 4 */
-		{   36,    36,    37,    38,    39},  /* IdSel 18,  slot 5 */
-		{   40,    40,    41,    42,    43},  /* IdSel 19,  slot 6 */
-		{   44,    44,    45,    46,    47},  /* IdSel 20,  slot 7 */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 22,  none   */
-		/* The following are actually behind the PPB. */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 16   none */
-		{   28,    28,    28,    28,    28},  /* IdSel 17   NCR lynx */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 18   none */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 19   none */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 20   none */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 21   none */
-		{   48,    48,    49,    50,    51},  /* IdSel 22   slot 0 */
-		{   52,    52,    53,    54,    55},  /* IdSel 23   slot 1 */
-		{   56,    56,    57,    58,    59},  /* IdSel 24   slot 2 */
-		{   60,    60,    61,    62,    63}   /* IdSel 25   slot 3 */
-	};
-	const long min_idsel = 2, max_idsel = 20, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-static u8
-lynx_swizzle(struct pci_dev *dev, u8 *pinp)
-{
-	int slot, pin = *pinp;
-
-	if (dev->bus->number == 0) {
-		slot = PCI_SLOT(dev->devfn);
-	}
-	/* Check for the built-in bridge */
-	else if (PCI_SLOT(dev->bus->self->devfn) == 3) {
-		slot = PCI_SLOT(dev->devfn) + 11;
-	}
-	else
-	{
-		/* Must be a card-based bridge.  */
-		do {
-			if (PCI_SLOT(dev->bus->self->devfn) == 3) {
-				slot = PCI_SLOT(dev->devfn) + 11;
-				break;
-			}
-			pin = pci_swizzle_interrupt_pin(dev, pin);
-
-			/* Move up the chain of bridges.  */
-			dev = dev->bus->self;
-			/* Slot of the next bridge.  */
-			slot = PCI_SLOT(dev->devfn);
-		} while (dev->bus->self);
-	}
-	*pinp = pin;
-	return slot;
-}
-
-#endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX) */
-
 /***********************************************************************/
 /* GENERIC irq routines */
 
@@ -539,40 +313,7 @@ sable_lynx_init_pci(void)
  * these games with GAMMA_BIAS.
  */
 
-#if defined(CONFIG_ALPHA_GENERIC) || \
-    (defined(CONFIG_ALPHA_SABLE) && !defined(CONFIG_ALPHA_GAMMA))
-#undef GAMMA_BIAS
-#define GAMMA_BIAS 0
-struct alpha_machine_vector sable_mv __initmv = {
-	.vector_name		= "Sable",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_T2_IO,
-	.machine_check		= t2_machine_check,
-	.max_isa_dma_address	= ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= T2_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 40,
-	.device_interrupt	= sable_lynx_srm_device_interrupt,
-
-	.init_arch		= t2_init_arch,
-	.init_irq		= sable_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= sable_lynx_init_pci,
-	.kill_arch		= t2_kill_arch,
-	.pci_map_irq		= sable_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .t2 = {
-	    .gamma_bias		= 0
-	} }
-};
-ALIAS_MV(sable)
-#endif /* GENERIC || (SABLE && !GAMMA) */
-
-#if defined(CONFIG_ALPHA_GENERIC) || \
-    (defined(CONFIG_ALPHA_SABLE) && defined(CONFIG_ALPHA_GAMMA))
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE)
 #undef GAMMA_BIAS
 #define GAMMA_BIAS _GAMMA_BIAS
 struct alpha_machine_vector sable_gamma_mv __initmv = {
@@ -601,35 +342,4 @@ struct alpha_machine_vector sable_gamma_mv __initmv = {
 	} }
 };
 ALIAS_MV(sable_gamma)
-#endif /* GENERIC || (SABLE && GAMMA) */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
-#undef GAMMA_BIAS
-#define GAMMA_BIAS _GAMMA_BIAS
-struct alpha_machine_vector lynx_mv __initmv = {
-	.vector_name		= "Lynx",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_T2_IO,
-	.machine_check		= t2_machine_check,
-	.max_isa_dma_address	= ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= T2_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 64,
-	.device_interrupt	= sable_lynx_srm_device_interrupt,
-
-	.init_arch		= t2_init_arch,
-	.init_irq		= lynx_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= sable_lynx_init_pci,
-	.kill_arch		= t2_kill_arch,
-	.pci_map_irq		= lynx_map_irq,
-	.pci_swizzle		= lynx_swizzle,
-
-	.sys = { .t2 = {
-	    .gamma_bias		= _GAMMA_BIAS
-	} }
-};
-ALIAS_MV(lynx)
-#endif /* GENERIC || LYNX */
+#endif /* GENERIC || SABLE */
diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c
deleted file mode 100644
index 7c420d8dac53..000000000000
--- a/arch/alpha/kernel/sys_sio.c
+++ /dev/null
@@ -1,484 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/sys_sio.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code for all boards that route the PCI interrupts through the SIO
- * PCI/ISA bridge.  This includes Noname (AXPpci33), Multia (UDB),
- * Kenetics's Platform 2000, Avanti (AlphaStation), XL, and AlphaBook1.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/screen_info.h>
-
-#include <asm/compiler.h>
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#include <asm/core_lca.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-#include "pc873xx.h"
-
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-/* Save LCA configuration data as the console had it set up.  */
-struct 
-{
-	unsigned int orig_route_tab; /* for SAVE/RESTORE */
-} saved_config __attribute((common));
-#endif
-
-
-static void __init
-sio_init_irq(void)
-{
-	if (alpha_using_srm)
-		alpha_mv.device_interrupt = srm_device_interrupt;
-
-	init_i8259a_irqs();
-	common_init_isa_dma();
-}
-
-static inline void __init
-alphabook1_init_arch(void)
-{
-	/* The AlphaBook1 has LCD video fixed at 800x600,
-	   37 rows and 100 cols. */
-	screen_info.orig_y = 37;
-	screen_info.orig_video_cols = 100;
-	screen_info.orig_video_lines = 37;
-
-	lca_init_arch();
-}
-
-
-/*
- * sio_route_tab selects irq routing in PCI/ISA bridge so that:
- *		PIRQ0 -> irq 15
- *		PIRQ1 -> irq  9
- *		PIRQ2 -> irq 10
- *		PIRQ3 -> irq 11
- *
- * This probably ought to be configurable via MILO.  For
- * example, sound boards seem to like using IRQ 9.
- *
- * This is NOT how we should do it. PIRQ0-X should have
- * their own IRQs, the way intel uses the IO-APIC IRQs.
- */
-
-static void __init
-sio_pci_route(void)
-{
-	unsigned int orig_route_tab;
-
-	/* First, ALWAYS read and print the original setting. */
-	pci_bus_read_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
-				  &orig_route_tab);
-	printk("%s: PIRQ original 0x%x new 0x%x\n", __func__,
-	       orig_route_tab, alpha_mv.sys.sio.route_tab);
-
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-	saved_config.orig_route_tab = orig_route_tab;
-#endif
-
-	/* Now override with desired setting. */
-	pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
-				   alpha_mv.sys.sio.route_tab);
-}
-
-static bool sio_pci_dev_irq_needs_level(const struct pci_dev *dev)
-{
-	if ((dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) &&
-	    (dev->class >> 8 != PCI_CLASS_BRIDGE_PCMCIA))
-		return false;
-
-	return true;
-}
-
-static unsigned int __init
-sio_collect_irq_levels(void)
-{
-	unsigned int level_bits = 0;
-	struct pci_dev *dev = NULL;
-
-	/* Iterate through the devices, collecting IRQ levels.  */
-	for_each_pci_dev(dev) {
-		if (!sio_pci_dev_irq_needs_level(dev))
-			continue;
-
-		if (dev->irq)
-			level_bits |= (1 << dev->irq);
-	}
-	return level_bits;
-}
-
-static void __sio_fixup_irq_levels(unsigned int level_bits, bool reset)
-{
-	unsigned int old_level_bits;
-
-	/*
-	 * Now, make all PCI interrupts level sensitive.  Notice:
-	 * these registers must be accessed byte-wise.  inw()/outw()
-	 * don't work.
-	 *
-	 * Make sure to turn off any level bits set for IRQs 9,10,11,15,
-	 *  so that the only bits getting set are for devices actually found.
-	 * Note that we do preserve the remainder of the bits, which we hope
-	 *  will be set correctly by ARC/SRM.
-	 *
-	 * Note: we at least preserve any level-set bits on AlphaBook1
-	 */
-	old_level_bits = inb(0x4d0) | (inb(0x4d1) << 8);
-
-	if (reset)
-		old_level_bits &= 0x71ff;
-
-	level_bits |= old_level_bits;
-
-	outb((level_bits >> 0) & 0xff, 0x4d0);
-	outb((level_bits >> 8) & 0xff, 0x4d1);
-}
-
-static inline void
-sio_fixup_irq_levels(unsigned int level_bits)
-{
-	__sio_fixup_irq_levels(level_bits, true);
-}
-
-static inline int
-noname_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	/*
-	 * The Noname board has 5 PCI slots with each of the 4
-	 * interrupt pins routed to different pins on the PCI/ISA
-	 * bridge (PIRQ0-PIRQ3).  The table below is based on
-	 * information available at:
-	 *
-	 *   http://ftp.digital.com/pub/DEC/axppci/ref_interrupts.txt
-	 *
-	 * I have no information on the Avanti interrupt routing, but
-	 * the routing seems to be identical to the Noname except
-	 * that the Avanti has an additional slot whose routing I'm
-	 * unsure of.
-	 *
-	 * pirq_tab[0] is a fake entry to deal with old PCI boards
-	 * that have the interrupt pin number hardwired to 0 (meaning
-	 * that they use the default INTA line, if they are interrupt
-	 * driven at all).
-	 */
-	static char irq_tab[][5] = {
-		/*INT A   B   C   D */
-		{ 3,  3,  3,  3,  3}, /* idsel  6 (53c810) */ 
-		{-1, -1, -1, -1, -1}, /* idsel  7 (SIO: PCI/ISA bridge) */
-		{ 2,  2, -1, -1, -1}, /* idsel  8 (Hack: slot closest ISA) */
-		{-1, -1, -1, -1, -1}, /* idsel  9 (unused) */
-		{-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
-		{ 0,  0,  2,  1,  0}, /* idsel 11 KN25_PCI_SLOT0 */
-		{ 1,  1,  0,  2,  1}, /* idsel 12 KN25_PCI_SLOT1 */
-		{ 2,  2,  1,  0,  2}, /* idsel 13 KN25_PCI_SLOT2 */
-		{ 0,  0,  0,  0,  0}, /* idsel 14 AS255 TULIP */
-	};
-	const long min_idsel = 6, max_idsel = 14, irqs_per_slot = 5;
-	int irq = COMMON_TABLE_LOOKUP, tmp;
-	tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
-
-	irq = irq >= 0 ? tmp : -1;
-
-	/* Fixup IRQ level if an actual IRQ mapping is detected */
-	if (sio_pci_dev_irq_needs_level(dev) && irq >= 0)
-		__sio_fixup_irq_levels(1 << irq, false);
-
-	return irq;
-}
-
-static inline int
-p2k_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[][5] = {
-		/*INT A   B   C   D */
-		{ 0,  0, -1, -1, -1}, /* idsel  6 (53c810) */
-		{-1, -1, -1, -1, -1}, /* idsel  7 (SIO: PCI/ISA bridge) */
-		{ 1,  1,  2,  3,  0}, /* idsel  8 (slot A) */
-		{ 2,  2,  3,  0,  1}, /* idsel  9 (slot B) */
-		{-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
-		{-1, -1, -1, -1, -1}, /* idsel 11 (unused) */
-		{ 3,  3, -1, -1, -1}, /* idsel 12 (CMD0646) */
-	};
-	const long min_idsel = 6, max_idsel = 12, irqs_per_slot = 5;
-	int irq = COMMON_TABLE_LOOKUP, tmp;
-	tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
-	return irq >= 0 ? tmp : -1;
-}
-
-static inline void __init
-noname_init_pci(void)
-{
-	common_init_pci();
-	sio_pci_route();
-	sio_fixup_irq_levels(sio_collect_irq_levels());
-
-	if (pc873xx_probe() == -1) {
-		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
-	} else {
-		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
-			pc873xx_get_model(), pc873xx_get_base());
-
-		/* Enabling things in the Super IO chip doesn't actually
-		 * configure and enable things, the legacy drivers still
-		 * need to do the actual configuration and enabling.
-		 * This only unblocks them.
-		 */
-
-#if !defined(CONFIG_ALPHA_AVANTI)
-		/* Don't bother on the Avanti family.
-		 * None of them had on-board IDE.
-		 */
-		pc873xx_enable_ide();
-#endif
-		pc873xx_enable_epp19();
-	}
-}
-
-static inline void __init
-alphabook1_init_pci(void)
-{
-	struct pci_dev *dev;
-	unsigned char orig, config;
-
-	common_init_pci();
-	sio_pci_route();
-
-	/*
-	 * On the AlphaBook1, the PCMCIA chip (Cirrus 6729)
-	 * is sensitive to PCI bus bursts, so we must DISABLE
-	 * burst mode for the NCR 8xx SCSI... :-(
-	 *
-	 * Note that the NCR810 SCSI driver must preserve the
-	 * setting of the bit in order for this to work.  At the
-	 * moment (2.0.29), ncr53c8xx.c does NOT do this, but
-	 * 53c7,8xx.c DOES.
-	 */
-
-	dev = NULL;
-	while ((dev = pci_get_device(PCI_VENDOR_ID_NCR, PCI_ANY_ID, dev))) {
-		if (dev->device == PCI_DEVICE_ID_NCR_53C810
-		    || dev->device == PCI_DEVICE_ID_NCR_53C815
-		    || dev->device == PCI_DEVICE_ID_NCR_53C820
-		    || dev->device == PCI_DEVICE_ID_NCR_53C825) {
-			unsigned long io_port;
-			unsigned char ctest4;
-
-			io_port = dev->resource[0].start;
-			ctest4 = inb(io_port+0x21);
-			if (!(ctest4 & 0x80)) {
-				printk("AlphaBook1 NCR init: setting"
-				       " burst disable\n");
-				outb(ctest4 | 0x80, io_port+0x21);
-			}
-                }
-	}
-
-	/* Do not set *ANY* level triggers for AlphaBook1. */
-	sio_fixup_irq_levels(0);
-
-	/* Make sure that register PR1 indicates 1Mb mem */
-	outb(0x0f, 0x3ce); orig = inb(0x3cf);   /* read PR5  */
-	outb(0x0f, 0x3ce); outb(0x05, 0x3cf);   /* unlock PR0-4 */
-	outb(0x0b, 0x3ce); config = inb(0x3cf); /* read PR1 */
-	if ((config & 0xc0) != 0xc0) {
-		printk("AlphaBook1 VGA init: setting 1Mb memory\n");
-		config |= 0xc0;
-		outb(0x0b, 0x3ce); outb(config, 0x3cf); /* write PR1 */
-	}
-	outb(0x0f, 0x3ce); outb(orig, 0x3cf); /* (re)lock PR0-4 */
-}
-
-void
-sio_kill_arch(int mode)
-{
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-	/* Since we cannot read the PCI DMA Window CSRs, we
-	 * cannot restore them here.
-	 *
-	 * However, we CAN read the PIRQ route register, so restore it
-	 * now...
-	 */
- 	pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
-				   saved_config.orig_route_tab);
-#endif
-}
-
-
-/*
- * The System Vectors
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_BOOK1)
-struct alpha_machine_vector alphabook1_mv __initmv = {
-	.vector_name		= "AlphaBook1",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= isa_device_interrupt,
-
-	.init_arch		= alphabook1_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= alphabook1_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		/* NCR810 SCSI is 14, PCMCIA controller is 15.  */
-		.route_tab	= 0x0e0f0a0a,
-	}}
-};
-ALIAS_MV(alphabook1)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_AVANTI)
-struct alpha_machine_vector avanti_mv __initmv = {
-	.vector_name		= "Avanti",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= isa_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		.route_tab	= 0x0b0a050f, /* leave 14 for IDE, 9 for SND */
-	}}
-};
-ALIAS_MV(avanti)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_NONAME)
-struct alpha_machine_vector noname_mv __initmv = {
-	.vector_name		= "Noname",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= srm_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		/* For UDB, the only available PCI slot must not map to IRQ 9,
-		   since that's the builtin MSS sound chip. That PCI slot
-		   will map to PIRQ1 (for INTA at least), so we give it IRQ 15
-		   instead.
-
-		   Unfortunately we have to do this for NONAME as well, since
-		   they are co-indicated when the platform type "Noname" is
-		   selected... :-(  */
-
-		.route_tab	= 0x0b0a0f0d,
-	}}
-};
-ALIAS_MV(noname)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_P2K)
-struct alpha_machine_vector p2k_mv __initmv = {
-	.vector_name		= "Platform2000",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= srm_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= p2k_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		.route_tab	= 0x0b0a090f,
-	}}
-};
-ALIAS_MV(p2k)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_XL)
-struct alpha_machine_vector xl_mv __initmv = {
-	.vector_name		= "XL",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_XL_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= XL_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= isa_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		.route_tab	= 0x0b0a090f,
-	}}
-};
-ALIAS_MV(xl)
-#endif
diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl
index 3515bc4f16a4..16dca28ebf17 100644
--- a/arch/alpha/kernel/syscalls/syscall.tbl
+++ b/arch/alpha/kernel/syscalls/syscall.tbl
@@ -125,8 +125,8 @@
 116	common	osf_gettimeofday		sys_osf_gettimeofday
 117	common	osf_getrusage			sys_osf_getrusage
 118	common	getsockopt			sys_getsockopt
-120	common	readv				sys_osf_readv
-121	common	writev				sys_osf_writev
+120	common	readv				sys_readv
+121	common	writev				sys_writev
 122	common	osf_settimeofday		sys_osf_settimeofday
 123	common	fchown				sys_fchown
 124	common	fchmod				sys_fchmod
@@ -334,7 +334,7 @@
 401	common	io_submit			sys_io_submit
 402	common	io_cancel			sys_io_cancel
 405	common	exit_group			sys_exit_group
-406	common	lookup_dcookie			sys_lookup_dcookie
+406	common	lookup_dcookie			sys_ni_syscall
 407	common	epoll_create			sys_epoll_create
 408	common	epoll_ctl			sys_epoll_ctl
 409	common	epoll_wait			sys_epoll_wait
@@ -474,7 +474,7 @@
 542	common	fsmount				sys_fsmount
 543	common	fspick				sys_fspick
 544	common	pidfd_open			sys_pidfd_open
-# 545 reserved for clone3
+545	common	clone3				alpha_clone3
 546	common	close_range			sys_close_range
 547	common	openat2				sys_openat2
 548	common	pidfd_getfd			sys_pidfd_getfd
@@ -490,3 +490,22 @@
 558	common	process_mrelease		sys_process_mrelease
 559	common  futex_waitv                     sys_futex_waitv
 560	common	set_mempolicy_home_node		sys_ni_syscall
+561	common	cachestat			sys_cachestat
+562	common	fchmodat2			sys_fchmodat2
+563	common	map_shadow_stack		sys_map_shadow_stack
+564	common	futex_wake			sys_futex_wake
+565	common	futex_wait			sys_futex_wait
+566	common	futex_requeue			sys_futex_requeue
+567	common	statmount			sys_statmount
+568	common	listmount			sys_listmount
+569	common	lsm_get_self_attr		sys_lsm_get_self_attr
+570	common	lsm_set_self_attr		sys_lsm_set_self_attr
+571	common	lsm_list_modules		sys_lsm_list_modules
+572	common  mseal				sys_mseal
+573	common	setxattrat			sys_setxattrat
+574	common	getxattrat			sys_getxattrat
+575	common	listxattrat			sys_listxattrat
+576	common	removexattrat			sys_removexattrat
+577	common	open_tree_attr			sys_open_tree_attr
+578	common	file_getattr			sys_file_getattr
+579	common	file_setattr			sys_file_setattr
diff --git a/arch/alpha/kernel/termios.c b/arch/alpha/kernel/termios.c
new file mode 100644
index 000000000000..a4c29a22edf7
--- /dev/null
+++ b/arch/alpha/kernel/termios.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/termios_internal.h>
+
+int user_termio_to_kernel_termios(struct ktermios *termios,
+						struct termio __user *termio)
+{
+	struct termio v;
+	bool canon;
+
+	if (copy_from_user(&v, termio, sizeof(struct termio)))
+		return -EFAULT;
+
+	termios->c_iflag = (0xffff0000 & termios->c_iflag) | v.c_iflag;
+	termios->c_oflag = (0xffff0000 & termios->c_oflag) | v.c_oflag;
+	termios->c_cflag = (0xffff0000 & termios->c_cflag) | v.c_cflag;
+	termios->c_lflag = (0xffff0000 & termios->c_lflag) | v.c_lflag;
+	termios->c_line = (0xffff0000 & termios->c_lflag) | v.c_line;
+
+	canon = v.c_lflag & ICANON;
+	termios->c_cc[VINTR]  = v.c_cc[_VINTR];
+	termios->c_cc[VQUIT]  = v.c_cc[_VQUIT];
+	termios->c_cc[VERASE] = v.c_cc[_VERASE];
+	termios->c_cc[VKILL]  = v.c_cc[_VKILL];
+	termios->c_cc[VEOL2]  = v.c_cc[_VEOL2];
+	termios->c_cc[VSWTC]  = v.c_cc[_VSWTC];
+	termios->c_cc[canon ? VEOF : VMIN]  = v.c_cc[_VEOF];
+	termios->c_cc[canon ? VEOL : VTIME] = v.c_cc[_VEOL];
+
+	return 0;
+}
+
+int kernel_termios_to_user_termio(struct termio __user *termio,
+						struct ktermios *termios)
+{
+	struct termio v;
+	bool canon;
+
+	memset(&v, 0, sizeof(struct termio));
+	v.c_iflag = termios->c_iflag;
+	v.c_oflag = termios->c_oflag;
+	v.c_cflag = termios->c_cflag;
+	v.c_lflag = termios->c_lflag;
+	v.c_line = termios->c_line;
+
+	canon = v.c_lflag & ICANON;
+	v.c_cc[_VINTR]  = termios->c_cc[VINTR];
+	v.c_cc[_VQUIT]  = termios->c_cc[VQUIT];
+	v.c_cc[_VERASE] = termios->c_cc[VERASE];
+	v.c_cc[_VKILL]  = termios->c_cc[VKILL];
+	v.c_cc[_VEOF]   = termios->c_cc[canon ? VEOF : VMIN];
+	v.c_cc[_VEOL]   = termios->c_cc[canon ? VEOL : VTIME];
+	v.c_cc[_VEOL2]  = termios->c_cc[VEOL2];
+	v.c_cc[_VSWTC]  = termios->c_cc[VSWTC];
+
+	return copy_to_user(termio, &v, sizeof(struct termio));
+}
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index 8a66fe544c69..7004397937cf 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -9,6 +9,7 @@
  * This file initializes the trap entry points
  */
 
+#include <linux/cpu.h>
 #include <linux/jiffies.h>
 #include <linux/mm.h>
 #include <linux/sched/signal.h>
@@ -21,7 +22,7 @@
 
 #include <asm/gentrap.h>
 #include <linux/uaccess.h>
-#include <asm/unaligned.h>
+#include <linux/unaligned.h>
 #include <asm/sysinfo.h>
 #include <asm/hwrpb.h>
 #include <asm/mmu_context.h>
@@ -29,39 +30,6 @@
 
 #include "proto.h"
 
-/* Work-around for some SRMs which mishandle opDEC faults.  */
-
-static int opDEC_fix;
-
-static void
-opDEC_check(void)
-{
-	__asm__ __volatile__ (
-	/* Load the address of... */
-	"	br	$16, 1f\n"
-	/* A stub instruction fault handler.  Just add 4 to the
-	   pc and continue.  */
-	"	ldq	$16, 8($sp)\n"
-	"	addq	$16, 4, $16\n"
-	"	stq	$16, 8($sp)\n"
-	"	call_pal %[rti]\n"
-	/* Install the instruction fault handler.  */
-	"1:	lda	$17, 3\n"
-	"	call_pal %[wrent]\n"
-	/* With that in place, the fault from the round-to-minf fp
-	   insn will arrive either at the "lda 4" insn (bad) or one
-	   past that (good).  This places the correct fixup in %0.  */
-	"	lda %[fix], 0\n"
-	"	cvttq/svm $f31,$f31\n"
-	"	lda %[fix], 4"
-	: [fix] "=r" (opDEC_fix)
-	: [rti] "n" (PAL_rti), [wrent] "n" (PAL_wrent)
-	: "$0", "$1", "$16", "$17", "$22", "$23", "$24", "$25");
-
-	if (opDEC_fix)
-		printk("opDEC fixup enabled.\n");
-}
-
 void
 dik_show_regs(struct pt_regs *regs, unsigned long *r9_15)
 {
@@ -233,7 +201,21 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 {
 	int signo, code;
 
-	if ((regs->ps & ~IPL_MAX) == 0) {
+	if (type == 3) { /* FEN fault */
+		/* Irritating users can call PAL_clrfen to disable the
+		   FPU for the process.  The kernel will then trap in
+		   do_switch_stack and undo_switch_stack when we try
+		   to save and restore the FP registers.
+
+		   Given that GCC by default generates code that uses the
+		   FP registers, PAL_clrfen is not useful except for DoS
+		   attacks.  So turn the bleeding FPU back on and be done
+		   with it.  */
+		current_thread_info()->pcb.flags |= 1;
+		__reload_thread(&current_thread_info()->pcb);
+		return;
+	}
+	if (!user_mode(regs)) {
 		if (type == 1) {
 			const unsigned int *data
 			  = (const unsigned int *) regs->pc;
@@ -338,48 +320,8 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 		return;
 
 	      case 4: /* opDEC */
-		if (implver() == IMPLVER_EV4) {
-			long si_code;
-
-			/* The some versions of SRM do not handle
-			   the opDEC properly - they return the PC of the
-			   opDEC fault, not the instruction after as the
-			   Alpha architecture requires.  Here we fix it up.
-			   We do this by intentionally causing an opDEC
-			   fault during the boot sequence and testing if
-			   we get the correct PC.  If not, we set a flag
-			   to correct it every time through.  */
-			regs->pc += opDEC_fix; 
-			
-			/* EV4 does not implement anything except normal
-			   rounding.  Everything else will come here as
-			   an illegal instruction.  Emulate them.  */
-			si_code = alpha_fp_emul(regs->pc - 4);
-			if (si_code == 0)
-				return;
-			if (si_code > 0) {
-				send_sig_fault_trapno(SIGFPE, si_code,
-						      (void __user *) regs->pc,
-						      0, current);
-				return;
-			}
-		}
 		break;
 
-	      case 3: /* FEN fault */
-		/* Irritating users can call PAL_clrfen to disable the
-		   FPU for the process.  The kernel will then trap in
-		   do_switch_stack and undo_switch_stack when we try
-		   to save and restore the FP registers.
-
-		   Given that GCC by default generates code that uses the
-		   FP registers, PAL_clrfen is not useful except for DoS
-		   attacks.  So turn the bleeding FPU back on and be done
-		   with it.  */
-		current_thread_info()->pcb.flags |= 1;
-		__reload_thread(&current_thread_info()->pcb);
-		return;
-
 	      case 5: /* illoc */
 	      default: /* unexpected instruction-fault type */
 		      ;
@@ -707,7 +649,7 @@ s_reg_to_mem (unsigned long s_reg)
 static int unauser_reg_offsets[32] = {
 	R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), R(r8),
 	/* r9 ... r15 are stored in front of regs.  */
-	-56, -48, -40, -32, -24, -16, -8,
+	-64, -56, -48, -40, -32, -24, -16,	/* padding at -8 */
 	R(r16), R(r17), R(r18),
 	R(r19), R(r20), R(r21), R(r22), R(r23), R(r24), R(r25), R(r26),
 	R(r27), R(r28), R(gp),
@@ -978,11 +920,6 @@ trap_init(void)
 	register unsigned long gptr __asm__("$29");
 	wrkgp(gptr);
 
-	/* Hack for Multia (UDB) and JENSEN: some of their SRMs have
-	   a bug in the handling of the opDEC fault.  Fix it up if so.  */
-	if (implver() == IMPLVER_EV4)
-		opDEC_check();
-
 	wrent(entArith, 1);
 	wrent(entMM, 2);
 	wrent(entIF, 3);
diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index 5b78d640725d..2efa7dfc798a 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -27,7 +27,6 @@ SECTIONS
 		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
-		CPUIDLE_TEXT
 		LOCK_TEXT
 		*(.fixup)
 		*(.gnu.warning)
diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile
index 1cc74f7b50ef..84046e730e6d 100644
--- a/arch/alpha/lib/Makefile
+++ b/arch/alpha/lib/Makefile
@@ -4,7 +4,6 @@
 #
 
 asflags-y := $(KBUILD_CFLAGS)
-ccflags-y := -Werror
 
 # Many of these routines have implementations tuned for ev6.
 # Choose them iff we're targeting ev6 specifically.
@@ -45,17 +44,3 @@ AFLAGS___remlu.o =       -DREM -DINTSIZE
 $(addprefix $(obj)/,__divqu.o __remqu.o __divlu.o __remlu.o): \
 						$(src)/$(ev6-y)divide.S FORCE
 	$(call if_changed_rule,as_o_S)
-
-# There are direct branches between {str*cpy,str*cat} and stx*cpy.
-# Ensure the branches are within range by merging these objects.
-
-LDFLAGS_stycpy.o := -r
-LDFLAGS_styncpy.o := -r
-
-$(obj)/stycpy.o: $(obj)/strcpy.o $(obj)/$(ev67-y)strcat.o \
-		 $(obj)/$(ev6-y)stxcpy.o FORCE
-	$(call if_changed,ld)
-
-$(obj)/styncpy.o: $(obj)/strncpy.o $(obj)/$(ev67-y)strncat.o \
-		 $(obj)/$(ev6-y)stxncpy.o FORCE
-	$(call if_changed,ld)
diff --git a/arch/alpha/lib/callback_srm.S b/arch/alpha/lib/callback_srm.S
index b13c4a231f1b..36b63f295170 100644
--- a/arch/alpha/lib/callback_srm.S
+++ b/arch/alpha/lib/callback_srm.S
@@ -3,8 +3,8 @@
  *	arch/alpha/lib/callback_srm.S
  */
 
+#include <linux/export.h>
 #include <asm/console.h>
-#include <asm/export.h>
 
 .text
 #define HWRPB_CRB_OFFSET 0xc0
diff --git a/arch/alpha/lib/checksum.c b/arch/alpha/lib/checksum.c
index 3f35c3ed6948..27b2a9edf3cc 100644
--- a/arch/alpha/lib/checksum.c
+++ b/arch/alpha/lib/checksum.c
@@ -12,8 +12,10 @@
  
 #include <linux/module.h>
 #include <linux/string.h>
+#include <net/checksum.h>
 
 #include <asm/byteorder.h>
+#include <asm/checksum.h>
 
 static inline unsigned short from64to16(unsigned long x)
 {
diff --git a/arch/alpha/lib/clear_page.S b/arch/alpha/lib/clear_page.S
index ce02de7b0493..af70ee309a33 100644
--- a/arch/alpha/lib/clear_page.S
+++ b/arch/alpha/lib/clear_page.S
@@ -4,7 +4,7 @@
  *
  * Zero an entire page.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 	.align 4
 	.global clear_page
diff --git a/arch/alpha/lib/clear_user.S b/arch/alpha/lib/clear_user.S
index db6c6ca45896..848eb60a0010 100644
--- a/arch/alpha/lib/clear_user.S
+++ b/arch/alpha/lib/clear_user.S
@@ -10,7 +10,7 @@
  * a successful copy).  There is also some rather minor exception setup
  * stuff.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 
 /* Allow an exception for an insn; exit if we get one.  */
 #define EX(x,y...)			\
diff --git a/arch/alpha/lib/copy_page.S b/arch/alpha/lib/copy_page.S
index 5439a30c77d0..1c444fdad9a5 100644
--- a/arch/alpha/lib/copy_page.S
+++ b/arch/alpha/lib/copy_page.S
@@ -4,7 +4,7 @@
  *
  * Copy an entire page.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 	.align 4
 	.global copy_page
diff --git a/arch/alpha/lib/copy_user.S b/arch/alpha/lib/copy_user.S
index 32ab0344b185..ef18faafcad6 100644
--- a/arch/alpha/lib/copy_user.S
+++ b/arch/alpha/lib/copy_user.S
@@ -12,7 +12,7 @@
  * exception setup stuff..
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 
 /* Allow an exception for an insn; exit if we get one.  */
 #define EXI(x,y...)			\
diff --git a/arch/alpha/lib/csum_ipv6_magic.S b/arch/alpha/lib/csum_ipv6_magic.S
index c7b213ab01ab..273c426c3859 100644
--- a/arch/alpha/lib/csum_ipv6_magic.S
+++ b/arch/alpha/lib/csum_ipv6_magic.S
@@ -13,7 +13,7 @@
  * added by Ivan Kokshaysky <ink@jurassic.park.msu.ru>
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 	.globl csum_ipv6_magic
 	.align 4
 	.ent csum_ipv6_magic
diff --git a/arch/alpha/lib/divide.S b/arch/alpha/lib/divide.S
index 2b60eb45e50b..db01840d76ec 100644
--- a/arch/alpha/lib/divide.S
+++ b/arch/alpha/lib/divide.S
@@ -46,7 +46,7 @@
  *	$28 - compare status
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 #define halt .long 0
 
 /*
diff --git a/arch/alpha/lib/ev6-clear_page.S b/arch/alpha/lib/ev6-clear_page.S
index 325864c81586..a534d9ff7161 100644
--- a/arch/alpha/lib/ev6-clear_page.S
+++ b/arch/alpha/lib/ev6-clear_page.S
@@ -4,7 +4,7 @@
  *
  * Zero an entire page.
  */
-#include <asm/export.h>
+#include <linux/export.h>
         .text
         .align 4
         .global clear_page
diff --git a/arch/alpha/lib/ev6-clear_user.S b/arch/alpha/lib/ev6-clear_user.S
index 7e644f83cdf2..af776cc45f91 100644
--- a/arch/alpha/lib/ev6-clear_user.S
+++ b/arch/alpha/lib/ev6-clear_user.S
@@ -29,7 +29,7 @@
  *	want to leave a hole (and we also want to avoid repeating lots of work)
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 /* Allow an exception for an insn; exit if we get one.  */
 #define EX(x,y...)			\
 	99: x,##y;			\
diff --git a/arch/alpha/lib/ev6-copy_page.S b/arch/alpha/lib/ev6-copy_page.S
index fd7212c8dcf1..36be5113b7b7 100644
--- a/arch/alpha/lib/ev6-copy_page.S
+++ b/arch/alpha/lib/ev6-copy_page.S
@@ -57,7 +57,7 @@
    destination pages are in the dcache, but it is my guess that this is
    less important than the dcache miss case.  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 	.align 4
 	.global copy_page
diff --git a/arch/alpha/lib/ev6-copy_user.S b/arch/alpha/lib/ev6-copy_user.S
index f3e433754397..b9b19710c364 100644
--- a/arch/alpha/lib/ev6-copy_user.S
+++ b/arch/alpha/lib/ev6-copy_user.S
@@ -23,7 +23,7 @@
  *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 /* Allow an exception for an insn; exit if we get one.  */
 #define EXI(x,y...)			\
 	99: x,##y;			\
diff --git a/arch/alpha/lib/ev6-csum_ipv6_magic.S b/arch/alpha/lib/ev6-csum_ipv6_magic.S
index 9a73f90700a1..2ee548be98e3 100644
--- a/arch/alpha/lib/ev6-csum_ipv6_magic.S
+++ b/arch/alpha/lib/ev6-csum_ipv6_magic.S
@@ -53,7 +53,7 @@
  * may cause additional delay in rare cases (load-load replay traps).
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 	.globl csum_ipv6_magic
 	.align 4
 	.ent csum_ipv6_magic
diff --git a/arch/alpha/lib/ev6-divide.S b/arch/alpha/lib/ev6-divide.S
index 137ff1a07356..b73a6d26362e 100644
--- a/arch/alpha/lib/ev6-divide.S
+++ b/arch/alpha/lib/ev6-divide.S
@@ -56,7 +56,7 @@
  * Try not to change the actual algorithm if possible for consistency.
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 #define halt .long 0
 
 /*
diff --git a/arch/alpha/lib/ev6-memchr.S b/arch/alpha/lib/ev6-memchr.S
index 56bf9e14eeee..f75ba43e61e3 100644
--- a/arch/alpha/lib/ev6-memchr.S
+++ b/arch/alpha/lib/ev6-memchr.S
@@ -28,7 +28,7 @@
  *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
  * Try not to change the actual algorithm if possible for consistency.
  */
-#include <asm/export.h>
+#include <linux/export.h>
         .set noreorder
         .set noat
 
diff --git a/arch/alpha/lib/ev6-memcpy.S b/arch/alpha/lib/ev6-memcpy.S
index ffbd056b6eb2..3ef43c26c8af 100644
--- a/arch/alpha/lib/ev6-memcpy.S
+++ b/arch/alpha/lib/ev6-memcpy.S
@@ -20,7 +20,7 @@
  * Temp usage notes:
  *	$1,$2,		- scratch
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.set noreorder
 	.set noat
 
diff --git a/arch/alpha/lib/ev6-memset.S b/arch/alpha/lib/ev6-memset.S
index 1cfcfbbea6f0..89d7809da4cc 100644
--- a/arch/alpha/lib/ev6-memset.S
+++ b/arch/alpha/lib/ev6-memset.S
@@ -27,7 +27,7 @@
  * as fixes will need to be made in multiple places.  The performance gain
  * is worth it.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.set noat
 	.set noreorder
 .text
diff --git a/arch/alpha/lib/ev67-strcat.S b/arch/alpha/lib/ev67-strcat.S
index ec3096a9e8d4..f8c7305b11d6 100644
--- a/arch/alpha/lib/ev67-strcat.S
+++ b/arch/alpha/lib/ev67-strcat.S
@@ -20,7 +20,7 @@
  * string once.
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 
 	.align 4
diff --git a/arch/alpha/lib/ev67-strchr.S b/arch/alpha/lib/ev67-strchr.S
index fbf89e0b6dc3..97a7cb475309 100644
--- a/arch/alpha/lib/ev67-strchr.S
+++ b/arch/alpha/lib/ev67-strchr.S
@@ -16,7 +16,7 @@
  *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
  * Try not to change the actual algorithm if possible for consistency.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 #include <asm/regdef.h>
 
 	.set noreorder
diff --git a/arch/alpha/lib/ev67-strlen.S b/arch/alpha/lib/ev67-strlen.S
index b73106ffbbc7..3d9078807ab4 100644
--- a/arch/alpha/lib/ev67-strlen.S
+++ b/arch/alpha/lib/ev67-strlen.S
@@ -18,7 +18,7 @@
  *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
  *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.set noreorder
 	.set noat
 
diff --git a/arch/alpha/lib/ev67-strncat.S b/arch/alpha/lib/ev67-strncat.S
index ceb0ca528789..8f313233e3a7 100644
--- a/arch/alpha/lib/ev67-strncat.S
+++ b/arch/alpha/lib/ev67-strncat.S
@@ -21,7 +21,7 @@
  * Try not to change the actual algorithm if possible for consistency.
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 
 	.align 4
diff --git a/arch/alpha/lib/ev67-strrchr.S b/arch/alpha/lib/ev67-strrchr.S
index 7f80e398530f..ae7355f9ec56 100644
--- a/arch/alpha/lib/ev67-strrchr.S
+++ b/arch/alpha/lib/ev67-strrchr.S
@@ -19,7 +19,7 @@
  *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 #include <asm/regdef.h>
 
 	.set noreorder
diff --git a/arch/alpha/lib/fpreg.c b/arch/alpha/lib/fpreg.c
index 34fea465645b..3d32165043f8 100644
--- a/arch/alpha/lib/fpreg.c
+++ b/arch/alpha/lib/fpreg.c
@@ -7,6 +7,9 @@
 
 #include <linux/compiler.h>
 #include <linux/export.h>
+#include <linux/preempt.h>
+#include <asm/fpu.h>
+#include <asm/thread_info.h>
 
 #if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
 #define STT(reg,val)  asm volatile ("ftoit $f"#reg",%0" : "=r"(val));
@@ -19,7 +22,12 @@ alpha_read_fp_reg (unsigned long reg)
 {
 	unsigned long val;
 
-	switch (reg) {
+	if (unlikely(reg >= 32))
+		return 0;
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP)
+		val = current_thread_info()->fp[reg];
+	else switch (reg) {
 	      case  0: STT( 0, val); break;
 	      case  1: STT( 1, val); break;
 	      case  2: STT( 2, val); break;
@@ -52,8 +60,8 @@ alpha_read_fp_reg (unsigned long reg)
 	      case 29: STT(29, val); break;
 	      case 30: STT(30, val); break;
 	      case 31: STT(31, val); break;
-	      default: return 0;
 	}
+	preempt_enable();
 	return val;
 }
 EXPORT_SYMBOL(alpha_read_fp_reg);
@@ -67,7 +75,14 @@ EXPORT_SYMBOL(alpha_read_fp_reg);
 void
 alpha_write_fp_reg (unsigned long reg, unsigned long val)
 {
-	switch (reg) {
+	if (unlikely(reg >= 32))
+		return;
+
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		current_thread_info()->status |= TS_RESTORE_FP;
+		current_thread_info()->fp[reg] = val;
+	} else switch (reg) {
 	      case  0: LDT( 0, val); break;
 	      case  1: LDT( 1, val); break;
 	      case  2: LDT( 2, val); break;
@@ -101,6 +116,7 @@ alpha_write_fp_reg (unsigned long reg, unsigned long val)
 	      case 30: LDT(30, val); break;
 	      case 31: LDT(31, val); break;
 	}
+	preempt_enable();
 }
 EXPORT_SYMBOL(alpha_write_fp_reg);
 
@@ -115,7 +131,14 @@ alpha_read_fp_reg_s (unsigned long reg)
 {
 	unsigned long val;
 
-	switch (reg) {
+	if (unlikely(reg >= 32))
+		return 0;
+
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		LDT(0, current_thread_info()->fp[reg]);
+		STS(0, val);
+	} else switch (reg) {
 	      case  0: STS( 0, val); break;
 	      case  1: STS( 1, val); break;
 	      case  2: STS( 2, val); break;
@@ -148,8 +171,8 @@ alpha_read_fp_reg_s (unsigned long reg)
 	      case 29: STS(29, val); break;
 	      case 30: STS(30, val); break;
 	      case 31: STS(31, val); break;
-	      default: return 0;
 	}
+	preempt_enable();
 	return val;
 }
 EXPORT_SYMBOL(alpha_read_fp_reg_s);
@@ -163,7 +186,15 @@ EXPORT_SYMBOL(alpha_read_fp_reg_s);
 void
 alpha_write_fp_reg_s (unsigned long reg, unsigned long val)
 {
-	switch (reg) {
+	if (unlikely(reg >= 32))
+		return;
+
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		current_thread_info()->status |= TS_RESTORE_FP;
+		LDS(0, val);
+		STT(0, current_thread_info()->fp[reg]);
+	} else switch (reg) {
 	      case  0: LDS( 0, val); break;
 	      case  1: LDS( 1, val); break;
 	      case  2: LDS( 2, val); break;
@@ -197,5 +228,6 @@ alpha_write_fp_reg_s (unsigned long reg, unsigned long val)
 	      case 30: LDS(30, val); break;
 	      case 31: LDS(31, val); break;
 	}
+	preempt_enable();
 }
 EXPORT_SYMBOL(alpha_write_fp_reg_s);
diff --git a/arch/alpha/lib/memchr.S b/arch/alpha/lib/memchr.S
index c13d3eca2e05..45366e32feee 100644
--- a/arch/alpha/lib/memchr.S
+++ b/arch/alpha/lib/memchr.S
@@ -31,7 +31,7 @@ For correctness consider that:
       - only minimum number of quadwords may be accessed
       - the third argument is an unsigned long
 */
-#include <asm/export.h>
+#include <linux/export.h>
         .set noreorder
         .set noat
 
diff --git a/arch/alpha/lib/memcpy.c b/arch/alpha/lib/memcpy.c
index cbac3dc6d963..78b6850a9d53 100644
--- a/arch/alpha/lib/memcpy.c
+++ b/arch/alpha/lib/memcpy.c
@@ -18,6 +18,7 @@
 
 #include <linux/types.h>
 #include <linux/export.h>
+#include <linux/string.h>
 
 /*
  * This should be done in one go with ldq_u*2/mask/stq_u. Do it
@@ -150,6 +151,8 @@ static inline void __memcpy_aligned_dn (unsigned long d, unsigned long s,
 	DO_REST_ALIGNED_DN(d,s,n);
 }
 
+#undef memcpy
+
 void * memcpy(void * dest, const void *src, size_t n)
 {
 	if (!(((unsigned long) dest ^ (unsigned long) src) & 7)) {
diff --git a/arch/alpha/lib/memmove.S b/arch/alpha/lib/memmove.S
index 42d1922d0edf..3a27689e3390 100644
--- a/arch/alpha/lib/memmove.S
+++ b/arch/alpha/lib/memmove.S
@@ -7,7 +7,7 @@
  * This is hand-massaged output from the original memcpy.c.  We defer to
  * memcpy whenever possible; the backwards copy loops are not unrolled.
  */
-#include <asm/export.h>        
+#include <linux/export.h>
 	.set noat
 	.set noreorder
 	.text
diff --git a/arch/alpha/lib/memset.S b/arch/alpha/lib/memset.S
index 00393e30df25..9075d6918346 100644
--- a/arch/alpha/lib/memset.S
+++ b/arch/alpha/lib/memset.S
@@ -14,7 +14,7 @@
  * The scheduling comments are according to the EV5 documentation (and done by 
  * hand, so they might well be incorrect, please do tell me about it..)
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.set noat
 	.set noreorder
 .text
diff --git a/arch/alpha/lib/stacktrace.c b/arch/alpha/lib/stacktrace.c
index 62454a7810e2..2b1176dd5174 100644
--- a/arch/alpha/lib/stacktrace.c
+++ b/arch/alpha/lib/stacktrace.c
@@ -92,7 +92,7 @@ stacktrace(void)
 {
 	instr * ret_pc;
 	instr * prologue = (instr *)stacktrace;
-	register unsigned char * sp __asm__ ("$30");
+	unsigned char *sp = (unsigned char *)current_stack_pointer;
 
 	printk("\tstack trace:\n");
 	do {
diff --git a/arch/alpha/lib/strcat.S b/arch/alpha/lib/strcat.S
index 055877dccd27..62b90ebbcf44 100644
--- a/arch/alpha/lib/strcat.S
+++ b/arch/alpha/lib/strcat.S
@@ -5,7 +5,7 @@
  *
  * Append a null-terminated string from SRC to DST.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 
 	.text
 
diff --git a/arch/alpha/lib/strchr.S b/arch/alpha/lib/strchr.S
index 17871dd00280..68c54ff50dfe 100644
--- a/arch/alpha/lib/strchr.S
+++ b/arch/alpha/lib/strchr.S
@@ -6,7 +6,7 @@
  * Return the address of a given character within a null-terminated
  * string, or null if it is not found.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 #include <asm/regdef.h>
 
 	.set noreorder
diff --git a/arch/alpha/lib/strcpy.S b/arch/alpha/lib/strcpy.S
index cb74ad23a90d..d8773ba77525 100644
--- a/arch/alpha/lib/strcpy.S
+++ b/arch/alpha/lib/strcpy.S
@@ -6,7 +6,7 @@
  * Copy a null-terminated string from SRC to DST.  Return a pointer
  * to the null-terminator in the source.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 
 	.align 3
diff --git a/arch/alpha/lib/strlen.S b/arch/alpha/lib/strlen.S
index dd882fe4d7e3..4fc6a6ff24cd 100644
--- a/arch/alpha/lib/strlen.S
+++ b/arch/alpha/lib/strlen.S
@@ -12,7 +12,7 @@
  *	  do this instead of the 9 instructions that
  *	  binary search needs).
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.set noreorder
 	.set noat
 
diff --git a/arch/alpha/lib/strncat.S b/arch/alpha/lib/strncat.S
index 522fee3e26ac..a913a7c84a39 100644
--- a/arch/alpha/lib/strncat.S
+++ b/arch/alpha/lib/strncat.S
@@ -10,7 +10,7 @@
  * past count, whereas libc may write to count+1.  This follows the generic
  * implementation in lib/string.c and is, IMHO, more sensible.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 
 	.align 3
diff --git a/arch/alpha/lib/strncpy.S b/arch/alpha/lib/strncpy.S
index cc57fad8b7ca..cb90cf022df3 100644
--- a/arch/alpha/lib/strncpy.S
+++ b/arch/alpha/lib/strncpy.S
@@ -11,7 +11,7 @@
  * version has cropped that bit o' nastiness as well as assuming that
  * __stxncpy is in range of a branch.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.set noat
 	.set noreorder
 
diff --git a/arch/alpha/lib/strrchr.S b/arch/alpha/lib/strrchr.S
index 7650ba99b7e2..dd8e073b6cf2 100644
--- a/arch/alpha/lib/strrchr.S
+++ b/arch/alpha/lib/strrchr.S
@@ -6,7 +6,7 @@
  * Return the address of the last occurrence of a given character
  * within a null-terminated string, or null if it is not found.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 #include <asm/regdef.h>
 
 	.set noreorder
diff --git a/arch/alpha/lib/stycpy.S b/arch/alpha/lib/stycpy.S
new file mode 100644
index 000000000000..32ecd9c5f90d
--- /dev/null
+++ b/arch/alpha/lib/stycpy.S
@@ -0,0 +1,11 @@
+#include "strcpy.S"
+#ifdef CONFIG_ALPHA_EV67
+#include "ev67-strcat.S"
+#else
+#include "strcat.S"
+#endif
+#ifdef CONFIG_ALPHA_EV6
+#include "ev6-stxcpy.S"
+#else
+#include "stxcpy.S"
+#endif
diff --git a/arch/alpha/lib/styncpy.S b/arch/alpha/lib/styncpy.S
new file mode 100644
index 000000000000..72fc2754eb57
--- /dev/null
+++ b/arch/alpha/lib/styncpy.S
@@ -0,0 +1,11 @@
+#include "strncpy.S"
+#ifdef CONFIG_ALPHA_EV67
+#include "ev67-strncat.S"
+#else
+#include "strncat.S"
+#endif
+#ifdef CONFIG_ALPHA_EV6
+#include "ev6-stxncpy.S"
+#else
+#include "stxncpy.S"
+#endif
diff --git a/arch/alpha/lib/udiv-qrnnd.S b/arch/alpha/lib/udiv-qrnnd.S
index b887aa5428e5..96f05918bffe 100644
--- a/arch/alpha/lib/udiv-qrnnd.S
+++ b/arch/alpha/lib/udiv-qrnnd.S
@@ -25,7 +25,7 @@
  # along with GCC; see the file COPYING.  If not, write to the 
  # Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
  # MA 02111-1307, USA.
-#include <asm/export.h>
+#include <linux/export.h>
 
         .set noreorder
         .set noat
diff --git a/arch/alpha/math-emu/math.c b/arch/alpha/math-emu/math.c
index 4212258f3cfd..68d420bfd3c0 100644
--- a/arch/alpha/math-emu/math.c
+++ b/arch/alpha/math-emu/math.c
@@ -4,6 +4,7 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <asm/ptrace.h>
+#include <asm/fpu.h>
 
 #include <linux/uaccess.h>
 
@@ -45,12 +46,6 @@
 #define MISC_TRAPB	0x0000
 #define MISC_EXCB	0x0400
 
-extern unsigned long alpha_read_fp_reg (unsigned long reg);
-extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
-extern unsigned long alpha_read_fp_reg_s (unsigned long reg);
-extern void alpha_write_fp_reg_s (unsigned long reg, unsigned long val);
-
-
 #ifdef MODULE
 
 MODULE_DESCRIPTION("FP Software completion module");
diff --git a/arch/alpha/mm/Makefile b/arch/alpha/mm/Makefile
index bd770302eb82..101dbd06b4ce 100644
--- a/arch/alpha/mm/Makefile
+++ b/arch/alpha/mm/Makefile
@@ -3,6 +3,4 @@
 # Makefile for the linux alpha-specific parts of the memory manager.
 #
 
-ccflags-y := -Werror
-
 obj-y	:= init.o fault.o
diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c
index ef427a6bdd1a..a9816bbc9f34 100644
--- a/arch/alpha/mm/fault.c
+++ b/arch/alpha/mm/fault.c
@@ -78,8 +78,8 @@ __load_new_mm_context(struct mm_struct *next_mm)
 
 /* Macro for exception fixup code to access integer registers.  */
 #define dpf_reg(r)							\
-	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-16 :	\
-				 (r) <= 18 ? (r)+10 : (r)-10])
+	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-17 :	\
+				 (r) <= 18 ? (r)+11 : (r)-10])
 
 asmlinkage void
 do_page_fault(unsigned long address, unsigned long mmcsr,
@@ -119,20 +119,12 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 		flags |= FAULT_FLAG_USER;
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 retry:
-	mmap_read_lock(mm);
-	vma = find_vma(mm, address);
+	vma = lock_mm_and_find_vma(mm, address, regs);
 	if (!vma)
-		goto bad_area;
-	if (vma->vm_start <= address)
-		goto good_area;
-	if (!(vma->vm_flags & VM_GROWSDOWN))
-		goto bad_area;
-	if (expand_stack(vma, address))
-		goto bad_area;
+		goto bad_area_nosemaphore;
 
 	/* Ok, we have a good vm_area for this memory access, so
 	   we can handle it.  */
- good_area:
 	si_code = SEGV_ACCERR;
 	if (cause < 0) {
 		if (!(vma->vm_flags & VM_EXEC))
@@ -152,8 +144,11 @@ retry:
 	   the fault.  */
 	fault = handle_mm_fault(vma, address, flags, regs);
 
-	if (fault_signal_pending(fault, regs))
+	if (fault_signal_pending(fault, regs)) {
+		if (!user_mode(regs))
+			goto no_context;
 		return;
+	}
 
 	/* The fault is fully completed (including releasing mmap lock) */
 	if (fault & VM_FAULT_COMPLETED)
@@ -189,6 +184,7 @@ retry:
  bad_area:
 	mmap_read_unlock(mm);
 
+ bad_area_nosemaphore:
 	if (user_mode(regs))
 		goto do_sigsegv;
 
diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index a155180d7a83..4c5ab9cd8a0a 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -33,7 +33,7 @@
 #include <asm/setup.h>
 #include <asm/sections.h>
 
-extern void die_if_kernel(char *,struct pt_regs *,long);
+#include "../kernel/proto.h"
 
 static struct pcb_struct original_pcb;
 
@@ -42,7 +42,7 @@ pgd_alloc(struct mm_struct *mm)
 {
 	pgd_t *ret, *init;
 
-	ret = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+	ret = __pgd_alloc(mm, 0);
 	init = pgd_offset(&init_mm, 0UL);
 	if (ret) {
 #ifdef CONFIG_ALPHA_LARGE_VMALLOC
@@ -60,33 +60,6 @@ pgd_alloc(struct mm_struct *mm)
 }
 
 
-/*
- * BAD_PAGE is the page that is used for page faults when linux
- * is out-of-memory. Older versions of linux just did a
- * do_exit(), but using this instead means there is less risk
- * for a process dying in kernel mode, possibly leaving an inode
- * unused etc..
- *
- * BAD_PAGETABLE is the accompanying page-table: it is initialized
- * to point to BAD_PAGE entries.
- *
- * ZERO_PAGE is a special page that is used for zero-initialized
- * data and COW.
- */
-pmd_t *
-__bad_pagetable(void)
-{
-	memset(absolute_pointer(EMPTY_PGT), 0, PAGE_SIZE);
-	return (pmd_t *) EMPTY_PGT;
-}
-
-pte_t
-__bad_page(void)
-{
-	memset(absolute_pointer(EMPTY_PGE), 0, PAGE_SIZE);
-	return pte_mkdirty(mk_pte(virt_to_page(EMPTY_PGE), PAGE_SHARED));
-}
-
 static inline unsigned long
 load_PCB(struct pcb_struct *pcb)
 {
@@ -273,14 +246,6 @@ srm_paging_stop (void)
 }
 #endif
 
-void __init
-mem_init(void)
-{
-	set_max_mapnr(max_low_pfn);
-	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
-	memblock_free_all();
-}
-
 static const pgprot_t protection_map[16] = {
 	[VM_NONE]					= _PAGE_P(_PAGE_FOE | _PAGE_FOW |
 								  _PAGE_FOR),
diff --git a/arch/arc/Kbuild b/arch/arc/Kbuild
index b94102fff68b..20ea7dd482d4 100644
--- a/arch/arc/Kbuild
+++ b/arch/arc/Kbuild
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-y += kernel/
 obj-y += mm/
+obj-y += net/
 
 # for cleaning
 subdir- += boot
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 9e3653253ef2..f27e6b90428e 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -6,6 +6,7 @@
 config ARC
 	def_bool y
 	select ARC_TIMERS
+	select ARCH_HAS_CPU_CACHE_ALIASING
 	select ARCH_HAS_CACHE_LINE_SIZE
 	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DMA_PREP_COHERENT
@@ -13,9 +14,11 @@ config ARC
 	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_NEED_CMPXCHG_1_EMU
 	select ARCH_SUPPORTS_ATOMIC_RMW if ARC_HAS_LLSC
 	select ARCH_32BIT_OFF_T
 	select BUILDTIME_TABLE_SORT
+	select GENERIC_BUILTIN_DTB
 	select CLONE_BACKWARDS
 	select COMMON_CLK
 	select DMA_DIRECT_REMAP
@@ -23,9 +26,11 @@ config ARC
 	# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
-	select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
+	select GENERIC_IOREMAP
+	select GENERIC_STRNCPY_FROM_USER if MMU
+	select GENERIC_STRNLEN_USER if MMU
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARC_MMU_V4
@@ -41,13 +46,14 @@ config ARC
 	select HAVE_PERF_EVENTS
 	select HAVE_SYSCALL_TRACEPOINTS
 	select IRQ_DOMAIN
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
 	select OF
 	select OF_EARLY_FLATTREE
 	select PCI_SYSCALL if PCI
-	select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING
 	select HAVE_ARCH_JUMP_LABEL if ISA_ARCV2 && !CPU_ENDIAN_BE32
 	select TRACE_IRQFLAGS_SUPPORT
+	select HAVE_EBPF_JIT if ISA_ARCV2
 
 config LOCKDEP_SUPPORT
 	def_bool y
@@ -228,10 +234,6 @@ config ARC_CACHE_PAGES
 	  Note that Global I/D ENABLE + Per Page DISABLE works but corollary
 	  Global DISABLE + Per Page ENABLE won't work
 
-config ARC_CACHE_VIPT_ALIASING
-	bool "Support VIPT Aliasing D$"
-	depends on ARC_HAS_DCACHE && ISA_ARCOMPACT
-
 endif #ARC_CACHE
 
 config ARC_HAS_ICCM
@@ -285,15 +287,17 @@ choice
 
 config ARC_PAGE_SIZE_8K
 	bool "8KB"
+	select HAVE_PAGE_SIZE_8KB
 	help
 	  Choose between 8k vs 16k
 
 config ARC_PAGE_SIZE_16K
+	select HAVE_PAGE_SIZE_16KB
 	bool "16KB"
 
 config ARC_PAGE_SIZE_4K
 	bool "4KB"
-	depends on ARC_MMU_V3 || ARC_MMU_V4
+	select HAVE_PAGE_SIZE_4KB
 
 endchoice
 
@@ -470,7 +474,8 @@ config HIGHMEM
 
 config ARC_HAS_PAE40
 	bool "Support for the 40-bit Physical Address Extension"
-	depends on ISA_ARCV2
+	depends on ARC_MMU_V4
+	depends on !ARC_PAGE_SIZE_4K
 	select HIGHMEM
 	select PHYS_ADDR_T_64BIT
 	help
@@ -489,11 +494,11 @@ config ARC_KVADDR_SIZE
 	  kernel-user gutter)
 
 config ARC_CURR_IN_REG
-	bool "Dedicate Register r25 for current_task pointer"
+	bool "cache current task pointer in gp"
 	default y
 	help
-	  This reserved Register R25 to point to Current Task in
-	  kernel mode. This saves memory access for each such access
+	  This reserves gp register to point to Current Task in
+	  kernel mode eliding memory access for each access
 
 
 config ARC_EMUL_UNALIGNED
@@ -546,17 +551,17 @@ config ARC_DBG_JUMP_LABEL
 	  part of static keys (jump labels) related code.
 endif
 
-config ARC_BUILTIN_DTB_NAME
+config BUILTIN_DTB_NAME
 	string "Built in DTB"
+	default "nsim_700"
 	help
-	  Set the name of the DTB to embed in the vmlinux binary
-	  Leaving it blank selects the minimal "skeleton" dtb
+	  Set the name of the DTB to embed in the vmlinux binary.
 
 endmenu	 # "ARC Architecture Configuration"
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
-	default "12" if ARC_HUGEPAGE_16M
-	default "11"
+	default "11" if ARC_HUGEPAGE_16M
+	default "10"
 
 source "kernel/power/Kconfig"
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index efc54f3e35e0..0c5e6e6314f2 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -6,7 +6,7 @@
 KBUILD_DEFCONFIG := haps_hs_smp_defconfig
 
 ifeq ($(CROSS_COMPILE),)
-CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-)
+CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux- arc-linux-gnu-)
 endif
 
 cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
@@ -28,14 +28,14 @@ cflags-y				+= $(tune-mcpu-def-y)
 endif
 endif
 
-
 ifdef CONFIG_ARC_CURR_IN_REG
 # For a global register definition, make sure it gets passed to every file
 # We had a customer reported bug where some code built in kernel was NOT using
-# any kernel headers, and missing the r25 global register
+# any kernel headers, and missing the global register
 # Can't do unconditionally because of recursive include issues
 # due to <linux/thread_info.h>
 LINUXINCLUDE	+=  -include $(srctree)/arch/arc/include/asm/current.h
+cflags-y	+= -ffixed-gp
 endif
 
 cflags-y				+= -fsection-anchors
@@ -67,7 +67,7 @@ cflags-$(CONFIG_ARC_DW2_UNWIND)		+= -fasynchronous-unwind-tables $(cfi)
 # small data is default for elf32 tool-chain. If not usable, disable it
 # This also allows repurposing GP as scratch reg to gcc reg allocator
 disable_small_data := y
-cflags-$(disable_small_data)		+= -mno-sdata -fcall-used-gp
+cflags-$(disable_small_data)		+= -mno-sdata
 
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -mbig-endian
 ldflags-$(CONFIG_CPU_BIG_ENDIAN)	+= -EB
@@ -82,11 +82,6 @@ KBUILD_CFLAGS	+= $(cflags-y)
 KBUILD_AFLAGS	+= $(KBUILD_CFLAGS)
 KBUILD_LDFLAGS	+= $(ldflags-y)
 
-head-y		:= arch/arc/kernel/head.o
-
-# w/o this dtb won't embed into kernel binary
-core-y		+= arch/arc/boot/dts/
-
 core-y				+= arch/arc/plat-sim/
 core-$(CONFIG_ARC_PLAT_TB10X)	+= arch/arc/plat-tb10x/
 core-$(CONFIG_ARC_PLAT_AXS10X)	+= arch/arc/plat-axs10x/
diff --git a/arch/arc/boot/Makefile b/arch/arc/boot/Makefile
index 5648748c285f..5a8550124b73 100644
--- a/arch/arc/boot/Makefile
+++ b/arch/arc/boot/Makefile
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 
-# uImage build relies on mkimage being availble on your host for ARC target
+# uImage build relies on mkimage being available on your host for ARC target
 # You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage
-# and make sure it's reacable from your PATH
+# and make sure it's reachable from your PATH
 
 OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S
 
diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile
index 4237aa5de3a3..ee5664f0640d 100644
--- a/arch/arc/boot/dts/Makefile
+++ b/arch/arc/boot/dts/Makefile
@@ -1,17 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
-# Built-in dtb
-builtindtb-y		:= nsim_700
 
-ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),)
-	builtindtb-y	:= $(CONFIG_ARC_BUILTIN_DTB_NAME)
-endif
-
-obj-y   += $(builtindtb-y).dtb.o
-dtb-y := $(builtindtb-y).dtb
+dtb-y	:= $(addsuffix .dtb, $(CONFIG_BUILTIN_DTB_NAME))
 
 # for CONFIG_OF_ALL_DTBS test
-dtstree	:= $(srctree)/$(src)
-dtb-	:= $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
+dtb-	:= $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts))
 
 # board-specific dtc flags
 DTC_FLAGS_hsdk += --pad 20
diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi
index 2a151607b080..88bcc7ab6f5a 100644
--- a/arch/arc/boot/dts/axc001.dtsi
+++ b/arch/arc/boot/dts/axc001.dtsi
@@ -54,7 +54,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <30>;
+				ngpios = <30>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index cd1edcf4f95e..9a2dc39a5cff 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -62,7 +62,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <30>;
+				ngpios = <30>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -103,11 +103,11 @@
 			dma-coherent;
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			dma-coherent;
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			dma-coherent;
 		};
 
@@ -119,9 +119,9 @@
 	/*
 	 * The DW APB ICTL intc on MB is connected to CPU intc via a
 	 * DT "invisible" DW APB GPIO block, configured to simply pass thru
-	 * interrupts - setup accordinly in platform init (plat-axs10x/ax10x.c)
+	 * interrupts - setup accordingly in platform init (plat-axs10x/ax10x.c)
 	 *
-	 * So here we mimic a direct connection betwen them, ignoring the
+	 * So here we mimic a direct connection between them, ignoring the
 	 * ABPG GPIO. Thus set "interrupts = <24>" (DW APB GPIO to core)
 	 * instead of "interrupts = <12>" (DW APB ICTL to DW APB GPIO)
 	 *
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index 70779386ca79..f31382cb8be4 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -69,7 +69,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <30>;
+				ngpios = <30>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -110,11 +110,11 @@
 			dma-coherent;
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			dma-coherent;
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			dma-coherent;
 		};
 
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index 99d3e7175bf7..3add2fe257f8 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -87,13 +87,13 @@
 			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
 			interrupts = < 8 >;
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			compatible = "generic-ohci";
 			reg = < 0x60000 0x100 >;
 			interrupts = < 8 >;
@@ -250,7 +250,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <32>;
+				ngpios = <32>;
 				reg = <0>;
 			};
 
@@ -258,7 +258,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <8>;
+				ngpios = <8>;
 				reg = <1>;
 			};
 
@@ -266,7 +266,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <8>;
+				ngpios = <8>;
 				reg = <2>;
 			};
 		};
@@ -281,7 +281,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <30>;
+				ngpios = <30>;
 				reg = <0>;
 			};
 
@@ -289,7 +289,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <10>;
+				ngpios = <10>;
 				reg = <1>;
 			};
 
@@ -297,7 +297,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <8>;
+				ngpios = <8>;
 				reg = <2>;
 			};
 		};
diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index f48ba03e9b5e..98bb850722a4 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -205,7 +205,6 @@
 		};
 
 		gmac: ethernet@8000 {
-			#interrupt-cells = <1>;
 			compatible = "snps,dwmac";
 			reg = <0x8000 0x2000>;
 			interrupts = <10>;
@@ -234,7 +233,7 @@
 			};
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
 			reg = <0x60000 0x100>;
 			interrupts = <15>;
@@ -242,7 +241,7 @@
 			dma-coherent;
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
 			reg = <0x40000 0x100>;
 			interrupts = <15>;
@@ -309,7 +308,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <24>;
+				ngpios = <24>;
 				reg = <0>;
 			};
 		};
diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
index cbb179770293..0e0e2d337bf8 100644
--- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -46,7 +46,7 @@
 			clock-names = "stmmaceth";
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
 			interrupts = < 8 >;
@@ -113,7 +113,7 @@
 	/*
 	 * Embedded Vision subsystem UIO mappings; only relevant for EV VDK
 	 *
-	 * This node is intentionally put outside of MB above becase
+	 * This node is intentionally put outside of MB above because
 	 * it maps areas outside of MB's 0xez-0xfz.
 	 */
 	uio_ev: uio@d0000000 {
diff --git a/arch/arc/configs/axs101_defconfig b/arch/arc/configs/axs101_defconfig
index e31a8ebc3ecc..a7cd526dd7ca 100644
--- a/arch/arc/configs/axs101_defconfig
+++ b/arch/arc/configs/axs101_defconfig
@@ -9,7 +9,7 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
@@ -23,7 +23,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS101=y
 CONFIG_ARC_CACHE_LINE_SHIFT=5
-CONFIG_ARC_BUILTIN_DTB_NAME="axs101"
+CONFIG_BUILTIN_DTB_NAME="axs101"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -35,9 +35,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
@@ -69,6 +66,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_DRM=m
@@ -99,7 +97,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig
index e0e8567f0d75..afa6a348f444 100644
--- a/arch/arc/configs/axs103_defconfig
+++ b/arch/arc/configs/axs103_defconfig
@@ -9,7 +9,7 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
@@ -22,7 +22,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
-CONFIG_ARC_BUILTIN_DTB_NAME="axs103"
+CONFIG_BUILTIN_DTB_NAME="axs103"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -34,9 +34,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
@@ -69,6 +66,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
@@ -97,7 +95,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig
index fcbc952bc75b..2bfa6371953c 100644
--- a/arch/arc/configs/axs103_smp_defconfig
+++ b/arch/arc/configs/axs103_smp_defconfig
@@ -9,11 +9,10 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
@@ -23,7 +22,7 @@ CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
-CONFIG_ARC_BUILTIN_DTB_NAME="axs103_idu"
+CONFIG_BUILTIN_DTB_NAME="axs103_idu"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -35,9 +34,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
@@ -70,6 +66,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_DRM=m
@@ -100,7 +97,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
diff --git a/arch/arc/configs/haps_hs_defconfig b/arch/arc/configs/haps_hs_defconfig
index d87ad7e88d62..3a1577112078 100644
--- a/arch/arc/configs/haps_hs_defconfig
+++ b/arch/arc/configs/haps_hs_defconfig
@@ -14,8 +14,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs"
+CONFIG_BUILTIN_DTB_NAME="haps_hs"
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_COMPACTION is not set
@@ -59,6 +58,5 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/haps_hs_smp_defconfig b/arch/arc/configs/haps_hs_smp_defconfig
index 8d82cdb7f86a..a3cf940b1f5b 100644
--- a/arch/arc/configs/haps_hs_smp_defconfig
+++ b/arch/arc/configs/haps_hs_smp_defconfig
@@ -11,13 +11,12 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
 CONFIG_SMP=y
-CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs_idu"
+CONFIG_BUILTIN_DTB_NAME="haps_hs_idu"
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
@@ -59,6 +58,5 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_SOFTLOCKUP_DETECTOR=y
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig
index f856b03e0fb5..1558e8e87767 100644
--- a/arch/arc/configs/hsdk_defconfig
+++ b/arch/arc/configs/hsdk_defconfig
@@ -9,11 +9,10 @@ CONFIG_NAMESPACES=y
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_ARC_SOC_HSDK=y
@@ -21,7 +20,7 @@ CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 CONFIG_LINUX_LINK_BASE=0x90000000
 CONFIG_LINUX_RAM_BASE=0x80000000
-CONFIG_ARC_BUILTIN_DTB_NAME="hsdk"
+CONFIG_BUILTIN_DTB_NAME="hsdk"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -85,7 +84,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
diff --git a/arch/arc/configs/nsim_700_defconfig b/arch/arc/configs/nsim_700_defconfig
index a1ce12bf5b16..f8b3235d9a65 100644
--- a/arch/arc/configs/nsim_700_defconfig
+++ b/arch/arc/configs/nsim_700_defconfig
@@ -12,12 +12,12 @@ CONFIG_NAMESPACES=y
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_ISA_ARCOMPACT=y
-CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700"
+CONFIG_BUILTIN_DTB_NAME="nsim_700"
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
@@ -56,5 +56,4 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig
index ca10f4a2c823..ee45dc0877fb 100644
--- a/arch/arc/configs/nsimosci_defconfig
+++ b/arch/arc/configs/nsimosci_defconfig
@@ -11,7 +11,7 @@ CONFIG_NAMESPACES=y
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
@@ -19,7 +19,7 @@ CONFIG_ISA_ARCOMPACT=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci"
+CONFIG_BUILTIN_DTB_NAME="nsimosci"
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -65,4 +65,3 @@ CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/arc/configs/nsimosci_hs_defconfig b/arch/arc/configs/nsimosci_hs_defconfig
index 31b6ec3683c6..e0a309970c20 100644
--- a/arch/arc/configs/nsimosci_hs_defconfig
+++ b/arch/arc/configs/nsimosci_hs_defconfig
@@ -11,7 +11,7 @@ CONFIG_NAMESPACES=y
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
@@ -19,7 +19,7 @@ CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ISA_ARCV2=y
-CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs"
+CONFIG_BUILTIN_DTB_NAME="nsimosci_hs"
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -63,4 +63,3 @@ CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/arc/configs/nsimosci_hs_smp_defconfig b/arch/arc/configs/nsimosci_hs_smp_defconfig
index 41a0037f48a5..88325b8b49cf 100644
--- a/arch/arc/configs/nsimosci_hs_smp_defconfig
+++ b/arch/arc/configs/nsimosci_hs_smp_defconfig
@@ -16,7 +16,7 @@ CONFIG_MODULES=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 # CONFIG_ARC_TIMERS_64BIT is not set
-CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs_idu"
+CONFIG_BUILTIN_DTB_NAME="nsimosci_hs_idu"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -26,9 +26,6 @@ CONFIG_UNIX=y
 CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
@@ -37,7 +34,6 @@ CONFIG_DEVTMPFS=y
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
 # CONFIG_NET_VENDOR_INTEL is not set
@@ -74,5 +70,5 @@ CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FTRACE=y
+# CONFIG_NET_VENDOR_CADENCE is not set
diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig
index d93b65008d4a..865fbc19ef03 100644
--- a/arch/arc/configs/tb10x_defconfig
+++ b/arch/arc/configs/tb10x_defconfig
@@ -16,10 +16,9 @@ CONFIG_INITRAMFS_ROOT_GID=501
 # CONFIG_RD_GZIP is not set
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_AIO is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_ISA_ARCOMPACT=y
-CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
@@ -27,7 +26,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARC_PLAT_TB10X=y
 CONFIG_ARC_CACHE_LINE_SHIFT=5
 CONFIG_HZ=250
-CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk"
+CONFIG_BUILTIN_DTB_NAME="abilis_tb100_dvk"
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -35,15 +34,11 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_NETDEVICES=y
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
@@ -65,6 +60,7 @@ CONFIG_SERIAL_8250_DW=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
@@ -90,16 +86,15 @@ CONFIG_TMPFS=y
 CONFIG_CONFIGFS_FS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_INSTALL=y
-CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_NET_VENDOR_CADENCE is not set
diff --git a/arch/arc/configs/vdk_hs38_defconfig b/arch/arc/configs/vdk_hs38_defconfig
index 0c3b21416819..03d9ac20baa9 100644
--- a/arch/arc/configs/vdk_hs38_defconfig
+++ b/arch/arc/configs/vdk_hs38_defconfig
@@ -4,7 +4,7 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
@@ -13,7 +13,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
-CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38"
+CONFIG_BUILTIN_DTB_NAME="vdk_hs38"
 CONFIG_PREEMPT=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -58,8 +58,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-CONFIG_ARCPGU_RGB888=y
-CONFIG_ARCPGU_DISPTYPE=0
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
@@ -87,7 +85,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
index f9ad9d3ee702..c09488992f13 100644
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@@ -4,7 +4,7 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
@@ -15,7 +15,7 @@ CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 # CONFIG_ARC_TIMERS_64BIT is not set
-CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
+CONFIG_BUILTIN_DTB_NAME="vdk_hs38_smp"
 CONFIG_PREEMPT=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -91,7 +91,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild
index 3c1afa524b9c..4c69522e0328 100644
--- a/arch/arc/include/asm/Kbuild
+++ b/arch/arc/include/asm/Kbuild
@@ -1,6 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
+syscall-y += syscall_table_32.h
+
 generic-y += extable.h
 generic-y += kvm_para.h
 generic-y += mcs_spinlock.h
 generic-y += parport.h
 generic-y += user.h
+generic-y += text-patching.h
diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
index 2162023195c5..d84908a177bd 100644
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@@ -23,7 +23,7 @@
 #define ARC_REG_ICCM_BUILD	0x78	/* ICCM size (common) */
 #define ARC_REG_XY_MEM_BCR	0x79
 #define ARC_REG_MAC_BCR		0x7a
-#define ARC_REG_MUL_BCR		0x7b
+#define ARC_REG_MPY_BCR		0x7b
 #define ARC_REG_SWAP_BCR	0x7c
 #define ARC_REG_NORM_BCR	0x7d
 #define ARC_REG_MIXMAX_BCR	0x7e
@@ -144,16 +144,13 @@
 #define ARC_AUX_AGU_MOD2	0x5E2
 #define ARC_AUX_AGU_MOD3	0x5E3
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
-#include <soc/arc/aux.h>
+#include <soc/arc/arc_aux.h>
 
 /* Helpers */
 #define TO_KB(bytes)		((bytes) >> 10)
 #define TO_MB(bytes)		(TO_KB(bytes) >> 10)
-#define PAGES_TO_KB(n_pages)	((n_pages) << (PAGE_SHIFT - 10))
-#define PAGES_TO_MB(n_pages)	(PAGES_TO_KB(n_pages) >> 10)
-
 
 /*
  ***************************************************************
@@ -177,7 +174,7 @@ struct bcr_isa_arcv2 {
 #endif
 };
 
-struct bcr_uarch_build_arcv2 {
+struct bcr_uarch_build {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int pad:8, prod:8, maj:8, min:8;
 #else
@@ -185,6 +182,59 @@ struct bcr_uarch_build_arcv2 {
 #endif
 };
 
+struct bcr_mmu_3 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int ver:8, ways:4, sets:4, res:3, sasid:1, pg_sz:4,
+		     u_itlb:4, u_dtlb:4;
+#else
+	unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, sasid:1, res:3, sets:4,
+		     ways:4, ver:8;
+#endif
+};
+
+struct bcr_mmu_4 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int ver:8, sasid:1, sz1:4, sz0:4, res:2, pae:1,
+		     n_ways:2, n_entry:2, n_super:2, u_itlb:3, u_dtlb:3;
+#else
+	/*           DTLB      ITLB      JES        JE         JA      */
+	unsigned int u_dtlb:3, u_itlb:3, n_super:2, n_entry:2, n_ways:2,
+		     pae:1, res:2, sz0:4, sz1:4, sasid:1, ver:8;
+#endif
+};
+
+struct bcr_cache {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
+#else
+	unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
+#endif
+};
+
+struct bcr_slc_cfg {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:24, way:2, lsz:2, sz:4;
+#else
+	unsigned int sz:4, lsz:2, way:2, pad:24;
+#endif
+};
+
+struct bcr_clust_cfg {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:7, c:1, num_entries:8, num_cores:8, ver:8;
+#else
+	unsigned int ver:8, num_cores:8, num_entries:8, c:1, pad:7;
+#endif
+};
+
+struct bcr_volatile {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int start:4, limit:4, pad:22, order:1, disable:1;
+#else
+	unsigned int disable:1, order:1, pad:22, limit:4, start:4;
+#endif
+};
+
 struct bcr_mpy {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int pad:8, x1616:8, dsp:4, cycles:2, type:2, ver:8;
@@ -302,48 +352,6 @@ struct bcr_generic {
 #endif
 };
 
-/*
- *******************************************************************
- * Generic structures to hold build configuration used at runtime
- */
-
-struct cpuinfo_arc_mmu {
-	unsigned int ver:4, pg_sz_k:8, s_pg_sz_m:8, pad:10, sasid:1, pae:1;
-	unsigned int sets:12, ways:4, u_dtlb:8, u_itlb:8;
-};
-
-struct cpuinfo_arc_cache {
-	unsigned int sz_k:14, line_len:8, assoc:4, alias:1, vipt:1, pad:4;
-};
-
-struct cpuinfo_arc_bpu {
-	unsigned int ver, full, num_cache, num_pred, ret_stk;
-};
-
-struct cpuinfo_arc_ccm {
-	unsigned int base_addr, sz;
-};
-
-struct cpuinfo_arc {
-	struct cpuinfo_arc_cache icache, dcache, slc;
-	struct cpuinfo_arc_mmu mmu;
-	struct cpuinfo_arc_bpu bpu;
-	struct bcr_identity core;
-	struct bcr_isa_arcv2 isa;
-	const char *release, *name;
-	unsigned int vec_base;
-	struct cpuinfo_arc_ccm iccm, dccm;
-	struct {
-		unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, swape:1, pad1:2,
-			     fpu_sp:1, fpu_dp:1, dual:1, dual_enb:1, pad2:4,
-			     ap_num:4, ap_full:1, smart:1, rtt:1, pad3:1,
-			     timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
-	} extn;
-	struct bcr_mpy extn_mpy;
-};
-
-extern struct cpuinfo_arc cpuinfo_arc700[];
-
 static inline int is_isa_arcv2(void)
 {
 	return IS_ENABLED(CONFIG_ISA_ARCV2);
diff --git a/arch/arc/include/asm/atomic-llsc.h b/arch/arc/include/asm/atomic-llsc.h
index 1b0ffaeee16d..5258cb81a16b 100644
--- a/arch/arc/include/asm/atomic-llsc.h
+++ b/arch/arc/include/asm/atomic-llsc.h
@@ -18,7 +18,7 @@ static inline void arch_atomic_##op(int i, atomic_t *v)			\
 	: [val]	"=&r"	(val) /* Early clobber to prevent reg reuse */	\
 	: [ctr]	"r"	(&v->counter), /* Not "m": llock only supports reg direct addr mode */	\
 	  [i]	"ir"	(i)						\
-	: "cc");							\
+	: "cc", "memory");						\
 }									\
 
 #define ATOMIC_OP_RETURN(op, asm_op)				\
@@ -34,7 +34,7 @@ static inline int arch_atomic_##op##_return_relaxed(int i, atomic_t *v)	\
 	: [val]	"=&r"	(val)						\
 	: [ctr]	"r"	(&v->counter),					\
 	  [i]	"ir"	(i)						\
-	: "cc");							\
+	: "cc", "memory");						\
 									\
 	return val;							\
 }
@@ -56,7 +56,7 @@ static inline int arch_atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
 	  [orig] "=&r" (orig)						\
 	: [ctr]	"r"	(&v->counter),					\
 	  [i]	"ir"	(i)						\
-	: "cc");							\
+	: "cc", "memory");						\
 									\
 	return orig;							\
 }
diff --git a/arch/arc/include/asm/atomic-spinlock.h b/arch/arc/include/asm/atomic-spinlock.h
index 2c830347bfb4..89d12a60f84c 100644
--- a/arch/arc/include/asm/atomic-spinlock.h
+++ b/arch/arc/include/asm/atomic-spinlock.h
@@ -81,6 +81,11 @@ static inline int arch_atomic_fetch_##op(int i, atomic_t *v)		\
 ATOMIC_OPS(add, +=, add)
 ATOMIC_OPS(sub, -=, sub)
 
+#define arch_atomic_fetch_add		arch_atomic_fetch_add
+#define arch_atomic_fetch_sub		arch_atomic_fetch_sub
+#define arch_atomic_add_return		arch_atomic_add_return
+#define arch_atomic_sub_return		arch_atomic_sub_return
+
 #undef ATOMIC_OPS
 #define ATOMIC_OPS(op, c_op, asm_op)					\
 	ATOMIC_OP(op, c_op, asm_op)					\
@@ -92,7 +97,11 @@ ATOMIC_OPS(or, |=, or)
 ATOMIC_OPS(xor, ^=, xor)
 
 #define arch_atomic_andnot		arch_atomic_andnot
+
+#define arch_atomic_fetch_and		arch_atomic_fetch_and
 #define arch_atomic_fetch_andnot	arch_atomic_fetch_andnot
+#define arch_atomic_fetch_or		arch_atomic_fetch_or
+#define arch_atomic_fetch_xor		arch_atomic_fetch_xor
 
 #undef ATOMIC_OPS
 #undef ATOMIC_FETCH_OP
diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h
index 52ee51e1ff7c..e615c42b93ba 100644
--- a/arch/arc/include/asm/atomic.h
+++ b/arch/arc/include/asm/atomic.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_ATOMIC_H
 #define _ASM_ARC_ATOMIC_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <linux/compiler.h>
@@ -22,30 +22,6 @@
 #include <asm/atomic-spinlock.h>
 #endif
 
-#define arch_atomic_cmpxchg(v, o, n)					\
-({									\
-	arch_cmpxchg(&((v)->counter), (o), (n));			\
-})
-
-#ifdef arch_cmpxchg_relaxed
-#define arch_atomic_cmpxchg_relaxed(v, o, n)				\
-({									\
-	arch_cmpxchg_relaxed(&((v)->counter), (o), (n));		\
-})
-#endif
-
-#define arch_atomic_xchg(v, n)						\
-({									\
-	arch_xchg(&((v)->counter), (n));				\
-})
-
-#ifdef arch_xchg_relaxed
-#define arch_atomic_xchg_relaxed(v, n)					\
-({									\
-	arch_xchg_relaxed(&((v)->counter), (n));			\
-})
-#endif
-
 /*
  * 64-bit atomics
  */
@@ -55,6 +31,6 @@
 #include <asm/atomic64-arcv2.h>
 #endif
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/atomic64-arcv2.h b/arch/arc/include/asm/atomic64-arcv2.h
index c5a8010fdc97..73080a664369 100644
--- a/arch/arc/include/asm/atomic64-arcv2.h
+++ b/arch/arc/include/asm/atomic64-arcv2.h
@@ -60,7 +60,7 @@ static inline void arch_atomic64_##op(s64 a, atomic64_t *v)		\
 	"	bnz     1b		\n"				\
 	: "=&r"(val)							\
 	: "r"(&v->counter), "ir"(a)					\
-	: "cc");							\
+	: "cc", "memory");						\
 }									\
 
 #define ATOMIC64_OP_RETURN(op, op1, op2)		        	\
@@ -77,7 +77,7 @@ static inline s64 arch_atomic64_##op##_return_relaxed(s64 a, atomic64_t *v)	\
 	"	bnz     1b		\n"				\
 	: [val] "=&r"(val)						\
 	: "r"(&v->counter), "ir"(a)					\
-	: "cc");	/* memory clobber comes from smp_mb() */	\
+	: "cc", "memory");						\
 									\
 	return val;							\
 }
@@ -99,7 +99,7 @@ static inline s64 arch_atomic64_fetch_##op##_relaxed(s64 a, atomic64_t *v)	\
 	"	bnz     1b		\n"				\
 	: "=&r"(orig), "=&r"(val)					\
 	: "r"(&v->counter), "ir"(a)					\
-	: "cc");	/* memory clobber comes from smp_mb() */	\
+	: "cc", "memory");						\
 									\
 	return orig;							\
 }
@@ -137,12 +137,9 @@ ATOMIC64_OPS(xor, xor, xor)
 #undef ATOMIC64_OP_RETURN
 #undef ATOMIC64_OP
 
-static inline s64
-arch_atomic64_cmpxchg(atomic64_t *ptr, s64 expected, s64 new)
+static inline u64 __arch_cmpxchg64_relaxed(volatile void *ptr, u64 old, u64 new)
 {
-	s64 prev;
-
-	smp_mb();
+	u64 prev;
 
 	__asm__ __volatile__(
 	"1:	llockd  %0, [%1]	\n"
@@ -152,13 +149,12 @@ arch_atomic64_cmpxchg(atomic64_t *ptr, s64 expected, s64 new)
 	"	bnz     1b		\n"
 	"2:				\n"
 	: "=&r"(prev)
-	: "r"(ptr), "ir"(expected), "r"(new)
-	: "cc");	/* memory clobber comes from smp_mb() */
-
-	smp_mb();
+	: "r"(ptr), "ir"(old), "r"(new)
+	: "memory", "cc");
 
 	return prev;
 }
+#define arch_cmpxchg64_relaxed __arch_cmpxchg64_relaxed
 
 static inline s64 arch_atomic64_xchg(atomic64_t *ptr, s64 new)
 {
@@ -179,14 +175,7 @@ static inline s64 arch_atomic64_xchg(atomic64_t *ptr, s64 new)
 
 	return prev;
 }
-
-/**
- * arch_atomic64_dec_if_positive - decrement by 1 if old value positive
- * @v: pointer of type atomic64_t
- *
- * The function returns the old value of *v minus 1, even if
- * the atomic variable, v, was not decremented.
- */
+#define arch_atomic64_xchg arch_atomic64_xchg
 
 static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
 {
@@ -212,15 +201,6 @@ static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
 }
 #define arch_atomic64_dec_if_positive arch_atomic64_dec_if_positive
 
-/**
- * arch_atomic64_fetch_add_unless - add unless the number is a given value
- * @v: pointer of type atomic64_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, if it was not @u.
- * Returns the old value of @v
- */
 static inline s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
 {
 	s64 old, temp;
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
index bdb7e190a294..df894235fdbc 100644
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@@ -10,7 +10,7 @@
 #error only <linux/bitops.h> can be included directly
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <linux/compiler.h>
@@ -82,7 +82,7 @@ static inline __attribute__ ((const)) int fls(unsigned int x)
 /*
  * __fls: Similar to fls, but zero based (0-31)
  */
-static inline __attribute__ ((const)) int __fls(unsigned long x)
+static inline __attribute__ ((const)) unsigned long __fls(unsigned long x)
 {
 	if (!x)
 		return 0;
@@ -131,8 +131,10 @@ static inline __attribute__ ((const)) int fls(unsigned int x)
 /*
  * __fls: Similar to fls, but zero based (0-31). Also 0 if no bit set
  */
-static inline __attribute__ ((const)) int __fls(unsigned long x)
+static inline __attribute__ ((const)) unsigned long __fls(unsigned long x)
 {
+	if (__builtin_constant_p(x))
+		return x ? BITS_PER_LONG - 1 - __builtin_clzl(x) : 0;
 	/* FLS insn has exactly same semantics as the API */
 	return	__builtin_arc_fls(x);
 }
@@ -192,6 +194,6 @@ static inline __attribute__ ((const)) unsigned long __ffs(unsigned long x)
 #include <asm-generic/bitops/le.h>
 #include <asm-generic/bitops/ext2-atomic-setbit.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/bug.h b/arch/arc/include/asm/bug.h
index 4c453ba96c51..171c16021f70 100644
--- a/arch/arc/include/asm/bug.h
+++ b/arch/arc/include/asm/bug.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_BUG_H
 #define _ASM_ARC_BUG_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/ptrace.h>
 
@@ -29,6 +29,6 @@ void die(const char *str, struct pt_regs *regs, unsigned long address);
 
 #include <asm-generic/bug.h>
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
index f0f1fc5d62b6..040a97f4dd82 100644
--- a/arch/arc/include/asm/cache.h
+++ b/arch/arc/include/asm/cache.h
@@ -23,7 +23,7 @@
  */
 #define ARC_UNCACHED_ADDR_SPACE	0xc0000000
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/build_bug.h>
 
@@ -65,7 +65,7 @@
 extern int ioc_enable;
 extern unsigned long perip_base, perip_end;
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 /* Instruction cache related Auxiliary registers */
 #define ARC_REG_IC_BCR		0x77	/* Build Config reg */
diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h
index e201b4b1655a..329c94cd45d8 100644
--- a/arch/arc/include/asm/cacheflush.h
+++ b/arch/arc/include/asm/cacheflush.h
@@ -18,24 +18,18 @@
 #include <linux/mm.h>
 #include <asm/shmparam.h>
 
-/*
- * Semantically we need this because icache doesn't snoop dcache/dma.
- * However ARC Cache flush requires paddr as well as vaddr, latter not available
- * in the flush_icache_page() API. So we no-op it but do the equivalent work
- * in update_mmu_cache()
- */
-#define flush_icache_page(vma, page)
-
 void flush_cache_all(void);
 
 void flush_icache_range(unsigned long kstart, unsigned long kend);
 void __sync_icache_dcache(phys_addr_t paddr, unsigned long vaddr, int len);
-void __inv_icache_page(phys_addr_t paddr, unsigned long vaddr);
-void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr);
+void __inv_icache_pages(phys_addr_t paddr, unsigned long vaddr, unsigned nr);
+void __flush_dcache_pages(phys_addr_t paddr, unsigned long vaddr, unsigned nr);
 
 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 
 void flush_dcache_page(struct page *page);
+void flush_dcache_folio(struct folio *folio);
+#define flush_dcache_folio flush_dcache_folio
 
 void dma_cache_wback_inv(phys_addr_t start, unsigned long sz);
 void dma_cache_inv(phys_addr_t start, unsigned long sz);
@@ -46,35 +40,15 @@ void dma_cache_wback(phys_addr_t start, unsigned long sz);
 
 /* TBD: optimize this */
 #define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
 #define flush_cache_dup_mm(mm)			/* called on fork (VIVT only) */
 
-#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING
-
 #define flush_cache_mm(mm)			/* called on munmap/exit */
 #define flush_cache_range(mm, u_vstart, u_vend)
 #define flush_cache_page(vma, u_vaddr, pfn)	/* PF handling/COW-break */
 
-#else	/* VIPT aliasing dcache */
-
-/* To clear out stale userspace mappings */
-void flush_cache_mm(struct mm_struct *mm);
-void flush_cache_range(struct vm_area_struct *vma,
-	unsigned long start,unsigned long end);
-void flush_cache_page(struct vm_area_struct *vma,
-	unsigned long user_addr, unsigned long page);
-
-/*
- * To make sure that userspace mapping is flushed to memory before
- * get_user_pages() uses a kernel mapping to access the page
- */
-#define ARCH_HAS_FLUSH_ANON_PAGE
-void flush_anon_page(struct vm_area_struct *vma,
-	struct page *page, unsigned long u_vaddr);
-
-#endif	/* CONFIG_ARC_CACHE_VIPT_ALIASING */
-
 /*
  * A new pagecache page has PG_arch_1 clear - thus dcache dirty by default
  * This works around some PIO based drivers which don't call flush_dcache_page
@@ -82,28 +56,6 @@ void flush_anon_page(struct vm_area_struct *vma,
  */
 #define PG_dc_clean	PG_arch_1
 
-#define CACHE_COLORS_NUM	4
-#define CACHE_COLORS_MSK	(CACHE_COLORS_NUM - 1)
-#define CACHE_COLOR(addr)	(((unsigned long)(addr) >> (PAGE_SHIFT)) & CACHE_COLORS_MSK)
-
-/*
- * Simple wrapper over config option
- * Bootup code ensures that hardware matches kernel configuration
- */
-static inline int cache_is_vipt_aliasing(void)
-{
-	return IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
-}
-
-/*
- * checks if two addresses (after page aligning) index into same cache set
- */
-#define addr_not_cache_congruent(addr1, addr2)				\
-({									\
-	cache_is_vipt_aliasing() ? 					\
-		(CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0;		\
-})
-
 #define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
 do {									\
 	memcpy(dst, src, len);						\
diff --git a/arch/arc/include/asm/cachetype.h b/arch/arc/include/asm/cachetype.h
new file mode 100644
index 000000000000..acd3b6cb4bf5
--- /dev/null
+++ b/arch/arc/include/asm/cachetype.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARC_CACHETYPE_H
+#define __ASM_ARC_CACHETYPE_H
+
+#define cpu_dcache_is_aliasing()	false
+#define cpu_icache_is_aliasing()	true
+
+#endif
diff --git a/arch/arc/include/asm/cmpxchg.h b/arch/arc/include/asm/cmpxchg.h
index c5b544a5fe81..76f43db0890f 100644
--- a/arch/arc/include/asm/cmpxchg.h
+++ b/arch/arc/include/asm/cmpxchg.h
@@ -8,6 +8,7 @@
 
 #include <linux/build_bug.h>
 #include <linux/types.h>
+#include <linux/cmpxchg-emu.h>
 
 #include <asm/barrier.h>
 #include <asm/smp.h>
@@ -46,6 +47,9 @@
 	__typeof__(*(ptr)) _prev_;					\
 									\
 	switch(sizeof((_p_))) {						\
+	case 1:								\
+		_prev_ = (__typeof__(*(ptr)))cmpxchg_emu_u8((volatile u8 *__force)_p_, (uintptr_t)_o_, (uintptr_t)_n_);	\
+		break;							\
 	case 4:								\
 		_prev_ = __cmpxchg(_p_, _o_, _n_);			\
 		break;							\
@@ -65,8 +69,6 @@
 	__typeof__(*(ptr)) _prev_;					\
 	unsigned long __flags;						\
 									\
-	BUILD_BUG_ON(sizeof(_p_) != 4);					\
-									\
 	/*								\
 	 * spin lock/unlock provide the needed smp_mb() before/after	\
 	 */								\
@@ -85,7 +87,7 @@
  */
 #ifdef CONFIG_ARC_HAS_LLSC
 
-#define __xchg(ptr, val)						\
+#define __arch_xchg(ptr, val)						\
 ({									\
 	__asm__ __volatile__(						\
 	"	ex  %0, [%1]	\n"	/* set new value */	        \
@@ -102,7 +104,7 @@
 									\
 	switch(sizeof(*(_p_))) {					\
 	case 4:								\
-		_val_ = __xchg(_p_, _val_);				\
+		_val_ = __arch_xchg(_p_, _val_);			\
 		break;							\
 	default:							\
 		BUILD_BUG();						\
diff --git a/arch/arc/include/asm/current.h b/arch/arc/include/asm/current.h
index 9b9bdd3e6538..03ffd005f3fa 100644
--- a/arch/arc/include/asm/current.h
+++ b/arch/arc/include/asm/current.h
@@ -9,17 +9,17 @@
 #ifndef _ASM_ARC_CURRENT_H
 #define _ASM_ARC_CURRENT_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef CONFIG_ARC_CURR_IN_REG
 
-register struct task_struct *curr_arc asm("r25");
+register struct task_struct *curr_arc asm("gp");
 #define current (curr_arc)
 
 #else
 #include <asm-generic/current.h>
 #endif /* ! CONFIG_ARC_CURR_IN_REG */
 
-#endif /* ! __ASSEMBLY__ */
+#endif /* ! __ASSEMBLER__ */
 
 #endif /* _ASM_ARC_CURRENT_H */
diff --git a/arch/arc/include/asm/dsp-impl.h b/arch/arc/include/asm/dsp-impl.h
index cd5636dfeb6f..fd5fdaad90c1 100644
--- a/arch/arc/include/asm/dsp-impl.h
+++ b/arch/arc/include/asm/dsp-impl.h
@@ -11,7 +11,7 @@
 
 #define DSP_CTRL_DISABLED_ALL		0
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 /* clobbers r5 register */
 .macro DSP_EARLY_INIT
diff --git a/arch/arc/include/asm/dsp.h b/arch/arc/include/asm/dsp.h
index 202c78e56704..eeaaf4e4eabd 100644
--- a/arch/arc/include/asm/dsp.h
+++ b/arch/arc/include/asm/dsp.h
@@ -7,12 +7,12 @@
 #ifndef __ASM_ARC_DSP_H
 #define __ASM_ARC_DSP_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * DSP-related saved registers - need to be saved only when you are
  * scheduled out.
- * structure fields name must correspond to aux register defenitions for
+ * structure fields name must correspond to aux register definitions for
  * automatic offset calculation in DSP_AUX_SAVE_RESTORE macros
  */
 struct dsp_callee_regs {
@@ -24,6 +24,6 @@ struct dsp_callee_regs {
 #endif
 };
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_ARC_DSP_H */
diff --git a/arch/arc/include/asm/dwarf.h b/arch/arc/include/asm/dwarf.h
index 5f4de05bd4ee..1524c5cf8b59 100644
--- a/arch/arc/include/asm/dwarf.h
+++ b/arch/arc/include/asm/dwarf.h
@@ -6,30 +6,38 @@
 #ifndef _ASM_ARC_DWARF_H
 #define _ASM_ARC_DWARF_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #ifdef ARC_DW2_UNWIND_AS_CFI
 
-#define CFI_STARTPROC	.cfi_startproc
-#define CFI_ENDPROC	.cfi_endproc
-#define CFI_DEF_CFA	.cfi_def_cfa
-#define CFI_REGISTER	.cfi_register
-#define CFI_REL_OFFSET	.cfi_rel_offset
-#define CFI_UNDEFINED	.cfi_undefined
+#define CFI_STARTPROC		.cfi_startproc
+#define CFI_ENDPROC		.cfi_endproc
+#define CFI_DEF_CFA		.cfi_def_cfa
+#define CFI_DEF_CFA_OFFSET	.cfi_def_cfa_offset
+#define CFI_DEF_CFA_REGISTER	.cfi_def_cfa_register
+#define CFI_OFFSET		.cfi_offset
+#define CFI_REL_OFFSET		.cfi_rel_offset
+#define CFI_REGISTER		.cfi_register
+#define CFI_RESTORE		.cfi_restore
+#define CFI_UNDEFINED		.cfi_undefined
 
 #else
 
 #define CFI_IGNORE	#
 
-#define CFI_STARTPROC	CFI_IGNORE
-#define CFI_ENDPROC	CFI_IGNORE
-#define CFI_DEF_CFA	CFI_IGNORE
-#define CFI_REGISTER	CFI_IGNORE
-#define CFI_REL_OFFSET	CFI_IGNORE
-#define CFI_UNDEFINED	CFI_IGNORE
+#define CFI_STARTPROC		CFI_IGNORE
+#define CFI_ENDPROC		CFI_IGNORE
+#define CFI_DEF_CFA		CFI_IGNORE
+#define CFI_DEF_CFA_OFFSET	CFI_IGNORE
+#define CFI_DEF_CFA_REGISTER	CFI_IGNORE
+#define CFI_OFFSET		CFI_IGNORE
+#define CFI_REL_OFFSET		CFI_IGNORE
+#define CFI_REGISTER		CFI_IGNORE
+#define CFI_RESTORE		CFI_IGNORE
+#define CFI_UNDEFINED		CFI_IGNORE
 
 #endif	/* !ARC_DW2_UNWIND_AS_CFI */
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif	/* _ASM_ARC_DWARF_H */
diff --git a/arch/arc/include/asm/entry-arcv2.h b/arch/arc/include/asm/entry-arcv2.h
index 0ff4c0610561..3802a2daaf86 100644
--- a/arch/arc/include/asm/entry-arcv2.h
+++ b/arch/arc/include/asm/entry-arcv2.h
@@ -18,7 +18,6 @@
  *              |      orig_r0      |
  *              |      event/ECR    |
  *              |      bta          |
- *              |      user_r25     |
  *              |      gp           |
  *              |      fp           |
  *              |      sp           |
@@ -49,14 +48,18 @@
 /*------------------------------------------------------------------------*/
 .macro INTERRUPT_PROLOGUE
 
-	; (A) Before jumping to Interrupt Vector, hardware micro-ops did following:
+	; Before jumping to Interrupt Vector, hardware micro-ops did following:
 	;   1. SP auto-switched to kernel mode stack
 	;   2. STATUS32.Z flag set if in U mode at time of interrupt (U:1,K:0)
 	;   3. Auto save: (mandatory) Push PC and STAT32 on stack
 	;                 hardware does even if CONFIG_ARC_IRQ_NO_AUTOSAVE
-	;   4. Auto save: (optional) r0-r11, blink, LPE,LPS,LPC, JLI,LDI,EI
+	;  4a. Auto save: (optional) r0-r11, blink, LPE,LPS,LPC, JLI,LDI,EI
 	;
-	; (B) Manually saved some regs: r12,r25,r30, sp,fp,gp, ACCL pair
+	; Now
+	;  4b. If Auto-save (optional) not enabled in hw, manually save them
+	;   5. Manually save: r12,r30, sp,fp,gp, ACCL pair
+	;
+	; At the end, SP points to pt_regs
 
 #ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
 	; carve pt_regs on stack (case #3), PC/STAT32 already on stack
@@ -72,15 +75,16 @@
 .endm
 
 /*------------------------------------------------------------------------*/
-.macro EXCEPTION_PROLOGUE
+.macro EXCEPTION_PROLOGUE_KEEP_AE
 
-	; (A) Before jumping to Exception Vector, hardware micro-ops did following:
+	; Before jumping to Exception Vector, hardware micro-ops did following:
 	;   1. SP auto-switched to kernel mode stack
 	;   2. STATUS32.Z flag set if in U mode at time of exception (U:1,K:0)
 	;
-	; (B) Manually save the complete reg file below
+	; Now manually save rest of reg file
+	; At the end, SP points to pt_regs
 
-	sub	sp, sp, SZ_PT_REGS	; carve pt_regs
+	sub	sp, sp, SZ_PT_REGS	; carve space for pt_regs
 
 	; _HARD saves r10 clobbered by _SOFT as scratch hence comes first
 
@@ -100,6 +104,16 @@
 	; OUTPUT: r10 has ECR expected by EV_Trap
 .endm
 
+.macro EXCEPTION_PROLOGUE
+
+	EXCEPTION_PROLOGUE_KEEP_AE	; return ECR in r10
+
+	lr  r0, [efa]
+	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN		; clobbers r9
+.endm
+
 /*------------------------------------------------------------------------
  * This macro saves the registers manually which would normally be autosaved
  * by hardware on taken interrupts. It is used by
@@ -135,10 +149,10 @@
  */
 .macro __SAVE_REGFILE_SOFT
 
-	ST2	gp, fp, PT_r26		; gp (r26), fp (r27)
-
-	st	r12, [sp, PT_sp + 4]
-	st	r30, [sp, PT_sp + 8]
+	st	fp,  [sp, PT_fp]	; r27
+	st	r30, [sp, PT_r30]
+	st	r12, [sp, PT_r12]
+	st	r26, [sp, PT_r26]	; gp
 
 	; Saving pt_regs->sp correctly requires some extra work due to the way
 	; Auto stack switch works
@@ -153,30 +167,30 @@
 
 	; ISA requires ADD.nz to have same dest and src reg operands
 	mov.nz	r10, sp
-	add.nz	r10, r10, SZ_PT_REGS	; K mode SP
+	add2.nz	r10, r10, SZ_PT_REGS/4	; K mode SP
 
 	st	r10, [sp, PT_sp]	; SP (pt_regs->sp)
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	st	r25, [sp, PT_user_r25]
-	GET_CURR_TASK_ON_CPU	r25
-#endif
-
 #ifdef CONFIG_ARC_HAS_ACCL_REGS
 	ST2	r58, r59, PT_r58
 #endif
 
 	/* clobbers r10, r11 registers pair */
 	DSP_SAVE_REGFILE_IRQ
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	GET_CURR_TASK_ON_CPU	gp
+#endif
+
 .endm
 
 /*------------------------------------------------------------------------*/
 .macro __RESTORE_REGFILE_SOFT
 
-	LD2	gp, fp, PT_r26		; gp (r26), fp (r27)
-
-	ld	r12, [sp, PT_r12]
+	ld	fp,  [sp, PT_fp]
 	ld	r30, [sp, PT_r30]
+	ld	r12, [sp, PT_r12]
+	ld	r26, [sp, PT_r26]
 
 	; Restore SP (into AUX_USER_SP) only if returning to U mode
 	;  - for K mode, it will be implicitly restored as stack is unwound
@@ -188,10 +202,6 @@
 	sr	r10, [AUX_USER_SP]
 1:
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	ld	r25, [sp, PT_user_r25]
-#endif
-
 	/* clobbers r10, r11 registers pair */
 	DSP_RESTORE_REGFILE_IRQ
 
@@ -249,7 +259,7 @@
 
 	btst	r0, STATUS_U_BIT	; Z flag set if K, used in restoring SP
 
-	ld	r10, [sp, PT_event + 4]
+	ld	r10, [sp, PT_bta]
 	sr	r10, [erbta]
 
 	LD2	r10, r11, PT_ret
@@ -264,8 +274,8 @@
 
 .macro FAKE_RET_FROM_EXCPN
 	lr      r9, [status32]
-	bic     r9, r9, STATUS_AE_MASK
-	or      r9, r9, STATUS_IE_MASK
+	bclr    r9, r9, STATUS_AE_BIT
+	bset    r9, r9, STATUS_IE_BIT
 	kflag   r9
 .endm
 
@@ -281,4 +291,36 @@
 				/* M = 8-1  N = 8 */
 .endm
 
+.macro SAVE_ABI_CALLEE_REGS
+	push	r13
+	push	r14
+	push	r15
+	push	r16
+	push	r17
+	push	r18
+	push	r19
+	push	r20
+	push	r21
+	push	r22
+	push	r23
+	push	r24
+	push	r25
+.endm
+
+.macro RESTORE_ABI_CALLEE_REGS
+	pop	r25
+	pop	r24
+	pop	r23
+	pop	r22
+	pop	r21
+	pop	r20
+	pop	r19
+	pop	r18
+	pop	r17
+	pop	r16
+	pop	r15
+	pop	r14
+	pop	r13
+.endm
+
 #endif
diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h
index 5aab4f93ab8a..00946fe04c9b 100644
--- a/arch/arc/include/asm/entry-compact.h
+++ b/arch/arc/include/asm/entry-compact.h
@@ -7,7 +7,7 @@
  *  Stack switching code can no longer reliably rely on the fact that
  *  if we are NOT in user mode, stack is switched to kernel mode.
  *  e.g. L2 IRQ interrupted a L1 ISR which had not yet completed
- *  it's prologue including stack switching from user mode
+ *  its prologue including stack switching from user mode
  *
  * Vineetg: Aug 28th 2008: Bug #94984
  *  -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap
@@ -21,7 +21,7 @@
  *      r25 contains the kernel current task ptr
  *  - Defined Stack Switching Macro to be reused in all intr/excp hdlrs
  *  - Shaved off 11 instructions from RESTORE_ALL_INT1 by using the
- *      address Write back load ld.ab instead of seperate ld/add instn
+ *      address Write back load ld.ab instead of separate ld/add instn
  *
  * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
  */
@@ -33,6 +33,91 @@
 #include <asm/irqflags-compact.h>
 #include <asm/thread_info.h>	/* For THREAD_SIZE */
 
+/* Note on the LD/ST addr modes with addr reg wback
+ *
+ * LD.a same as LD.aw
+ *
+ * LD.a    reg1, [reg2, x]  => Pre Incr
+ *      Eff Addr for load = [reg2 + x]
+ *
+ * LD.ab   reg1, [reg2, x]  => Post Incr
+ *      Eff Addr for load = [reg2]
+ */
+
+.macro PUSHAX aux
+	lr	r9, [\aux]
+	push	r9
+.endm
+
+.macro POPAX aux
+	pop	r9
+	sr	r9, [\aux]
+.endm
+
+.macro  SAVE_R0_TO_R12
+	push	r0
+	push	r1
+	push	r2
+	push	r3
+	push	r4
+	push	r5
+	push	r6
+	push	r7
+	push	r8
+	push	r9
+	push	r10
+	push	r11
+	push	r12
+.endm
+
+.macro RESTORE_R12_TO_R0
+	pop	r12
+	pop	r11
+	pop	r10
+	pop	r9
+	pop	r8
+	pop	r7
+	pop	r6
+	pop	r5
+	pop	r4
+	pop	r3
+	pop	r2
+	pop	r1
+	pop	r0
+.endm
+
+.macro SAVE_ABI_CALLEE_REGS
+	push	r13
+	push	r14
+	push	r15
+	push	r16
+	push	r17
+	push	r18
+	push	r19
+	push	r20
+	push	r21
+	push	r22
+	push	r23
+	push	r24
+	push	r25
+.endm
+
+.macro RESTORE_ABI_CALLEE_REGS
+	pop	r25
+	pop	r24
+	pop	r23
+	pop	r22
+	pop	r21
+	pop	r20
+	pop	r19
+	pop	r18
+	pop	r17
+	pop	r16
+	pop	r15
+	pop	r14
+	pop	r13
+.endm
+
 /*--------------------------------------------------------------
  * Switch to Kernel Mode stack if SP points to User Mode stack
  *
@@ -58,7 +143,7 @@
 	 * 2. L1 IRQ taken, ISR starts (CPU auto-switched to KERNEL mode)
 	 * 3. But before it could switch SP from USER to KERNEL stack
 	 *      a L2 IRQ "Interrupts" L1
-	 * Thay way although L2 IRQ happened in Kernel mode, stack is still
+	 * That way although L2 IRQ happened in Kernel mode, stack is still
 	 * not switched.
 	 * To handle this, we may need to switch stack even if in kernel mode
 	 * provided SP has values in range of USER mode stack ( < 0x7000_0000 )
@@ -88,7 +173,7 @@
 
 	GET_CURR_TASK_ON_CPU   r9
 
-	/* With current tsk in r9, get it's kernel mode stack base */
+	/* With current tsk in r9, get its kernel mode stack base */
 	GET_TSK_STACK_BASE  r9, r9
 
 	/* save U mode SP @ pt_regs->sp */
@@ -140,7 +225,7 @@
  *
  * After this it is safe to call the "C" handlers
  *-------------------------------------------------------------*/
-.macro EXCEPTION_PROLOGUE
+.macro EXCEPTION_PROLOGUE_KEEP_AE
 
 	/* Need at least 1 reg to code the early exception prologue */
 	PROLOG_FREEUP_REG r9, @ex_saved_reg1
@@ -151,14 +236,6 @@
 	/* ARC700 doesn't provide auto-stack switching */
 	SWITCH_TO_KERNEL_STK
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	/* Treat r25 as scratch reg (save on stack) and load with "current" */
-	PUSH    r25
-	GET_CURR_TASK_ON_CPU   r25
-#else
-	sub     sp, sp, 4
-#endif
-
 	st.a	r0, [sp, -8]    /* orig_r0 needed for syscall (skip ECR slot) */
 	sub	sp, sp, 4	/* skip pt_regs->sp, already saved above */
 
@@ -178,7 +255,23 @@
 	PUSHAX	erbta
 
 	lr	r10, [ecr]
-	st      r10, [sp, PT_event]    /* EV_Trap expects r10 to have ECR */
+	st      r10, [sp, PT_event]
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	/* gp already saved on stack: now load with "current" */
+	GET_CURR_TASK_ON_CPU   gp
+#endif
+	; OUTPUT: r10 has ECR expected by EV_Trap
+.endm
+
+.macro EXCEPTION_PROLOGUE
+
+	EXCEPTION_PROLOGUE_KEEP_AE	; return ECR in r10
+
+	lr  r0, [efa]
+	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN		; clobbers r9
 .endm
 
 /*--------------------------------------------------------------
@@ -189,7 +282,7 @@
  * NOTE:
  *
  * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg
- * for memory load operations. If used in that way interrupts are deffered
+ * for memory load operations. If used in that way interrupts are deferred
  * by hardware and that is not good.
  *-------------------------------------------------------------*/
 .macro EXCEPTION_EPILOGUE
@@ -208,11 +301,8 @@
 	POP	gp
 	RESTORE_R12_TO_R0
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	ld	r25, [sp, 12]
-#endif
 	ld  sp, [sp] /* restore original sp */
-	/* orig_r0, ECR, user_r25 skipped automatically */
+	/* orig_r0, ECR skipped automatically */
 .endm
 
 /* Dummy ECR values for Interrupts */
@@ -229,15 +319,8 @@
 
 	SWITCH_TO_KERNEL_STK
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	/* Treat r25 as scratch reg (save on stack) and load with "current" */
-	PUSH    r25
-	GET_CURR_TASK_ON_CPU   r25
-#else
-	sub     sp, sp, 4
-#endif
 
-	PUSH	0x003\LVL\()abcd    /* Dummy ECR */
+	st.a	0x003\LVL\()abcd, [sp, -4]	/* Dummy ECR */
 	sub	sp, sp, 8	    /* skip orig_r0 (not needed)
 				       skip pt_regs->sp, already saved above */
 
@@ -255,6 +338,10 @@
 	PUSHAX	lp_start
 	PUSHAX	bta_l\LVL\()
 
+#ifdef CONFIG_ARC_CURR_IN_REG
+	/* gp already saved on stack: now load with "current" */
+	GET_CURR_TASK_ON_CPU   gp
+#endif
 .endm
 
 /*--------------------------------------------------------------
@@ -263,7 +350,7 @@
  * NOTE:
  *
  * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg
- * for memory load operations. If used in that way interrupts are deffered
+ * for memory load operations. If used in that way interrupts are deferred
  * by hardware and that is not good.
  *-------------------------------------------------------------*/
 .macro INTERRUPT_EPILOGUE  LVL
@@ -282,11 +369,7 @@
 	POP	gp
 	RESTORE_R12_TO_R0
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	ld	r25, [sp, 12]
-#endif
-	ld  sp, [sp] /* restore original sp */
-	/* orig_r0, ECR, user_r25 skipped automatically */
+	ld  sp, [sp] /* restore original sp; orig_r0, ECR skipped implicitly */
 .endm
 
 /* Get thread_info of "current" tsk */
diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h
index fcdd59d77f42..f453af251a1a 100644
--- a/arch/arc/include/asm/entry.h
+++ b/arch/arc/include/asm/entry.h
@@ -7,193 +7,45 @@
 #ifndef __ASM_ARC_ENTRY_H
 #define __ASM_ARC_ENTRY_H
 
-#include <asm/unistd.h>		/* For NR_syscalls defination */
+#include <asm/unistd.h>		/* For NR_syscalls definition */
 #include <asm/arcregs.h>
 #include <asm/ptrace.h>
 #include <asm/processor.h>	/* For VMALLOC_START */
 #include <asm/mmu.h>
 
+#ifdef __ASSEMBLER__
+
 #ifdef CONFIG_ISA_ARCOMPACT
 #include <asm/entry-compact.h>	/* ISA specific bits */
 #else
 #include <asm/entry-arcv2.h>
 #endif
 
-/* Note on the LD/ST addr modes with addr reg wback
- *
- * LD.a same as LD.aw
- *
- * LD.a    reg1, [reg2, x]  => Pre Incr
- *      Eff Addr for load = [reg2 + x]
- *
- * LD.ab   reg1, [reg2, x]  => Post Incr
- *      Eff Addr for load = [reg2]
+/*
+ * save user mode callee regs as struct callee_regs
+ *  - needed by fork/do_signal/unaligned-access-emulation.
  */
-
-.macro PUSH reg
-	st.a	\reg, [sp, -4]
-.endm
-
-.macro PUSHAX aux
-	lr	r9, [\aux]
-	PUSH	r9
-.endm
-
-.macro POP reg
-	ld.ab	\reg, [sp, 4]
-.endm
-
-.macro POPAX aux
-	POP	r9
-	sr	r9, [\aux]
-.endm
-
-/*--------------------------------------------------------------
- * Helpers to save/restore Scratch Regs:
- * used by Interrupt/Exception Prologue/Epilogue
- *-------------------------------------------------------------*/
-.macro  SAVE_R0_TO_R12
-	PUSH	r0
-	PUSH	r1
-	PUSH	r2
-	PUSH	r3
-	PUSH	r4
-	PUSH	r5
-	PUSH	r6
-	PUSH	r7
-	PUSH	r8
-	PUSH	r9
-	PUSH	r10
-	PUSH	r11
-	PUSH	r12
-.endm
-
-.macro RESTORE_R12_TO_R0
-	POP	r12
-	POP	r11
-	POP	r10
-	POP	r9
-	POP	r8
-	POP	r7
-	POP	r6
-	POP	r5
-	POP	r4
-	POP	r3
-	POP	r2
-	POP	r1
-	POP	r0
-
-.endm
-
-/*--------------------------------------------------------------
- * Helpers to save/restore callee-saved regs:
- * used by several macros below
- *-------------------------------------------------------------*/
-.macro SAVE_R13_TO_R24
-	PUSH	r13
-	PUSH	r14
-	PUSH	r15
-	PUSH	r16
-	PUSH	r17
-	PUSH	r18
-	PUSH	r19
-	PUSH	r20
-	PUSH	r21
-	PUSH	r22
-	PUSH	r23
-	PUSH	r24
-.endm
-
-.macro RESTORE_R24_TO_R13
-	POP	r24
-	POP	r23
-	POP	r22
-	POP	r21
-	POP	r20
-	POP	r19
-	POP	r18
-	POP	r17
-	POP	r16
-	POP	r15
-	POP	r14
-	POP	r13
-.endm
-
-/*--------------------------------------------------------------
- * Collect User Mode callee regs as struct callee_regs - needed by
- * fork/do_signal/unaligned-access-emulation.
- * (By default only scratch regs are saved on entry to kernel)
- *
- * Special handling for r25 if used for caching Task Pointer.
- * It would have been saved in task->thread.user_r25 already, but to keep
- * the interface same it is copied into regular r25 placeholder in
- * struct callee_regs.
- *-------------------------------------------------------------*/
 .macro SAVE_CALLEE_SAVED_USER
+	SAVE_ABI_CALLEE_REGS
+.endm
 
-	mov	r12, sp		; save SP as ref to pt_regs
-	SAVE_R13_TO_R24
-
-#ifdef CONFIG_ARC_CURR_IN_REG
-	; Retrieve orig r25 and save it with rest of callee_regs
-	ld	r12, [r12, PT_user_r25]
-	PUSH	r12
-#else
-	PUSH	r25
-#endif
-
+/*
+ * restore user mode callee regs as struct callee_regs
+ *  - could have been changed by ptrace tracer or unaligned-access fixup
+ */
+.macro RESTORE_CALLEE_SAVED_USER
+	RESTORE_ABI_CALLEE_REGS
 .endm
 
-/*--------------------------------------------------------------
- * Save kernel Mode callee regs at the time of Contect Switch.
- *
- * Special handling for r25 if used for caching Task Pointer.
- * Kernel simply skips saving it since it will be loaded with
- * incoming task pointer anyways
- *-------------------------------------------------------------*/
+/*
+ * save/restore kernel mode callee regs at the time of context switch
+ */
 .macro SAVE_CALLEE_SAVED_KERNEL
-
-	SAVE_R13_TO_R24
-
-#ifdef CONFIG_ARC_CURR_IN_REG
-	sub     sp, sp, 4
-#else
-	PUSH	r25
-#endif
+	SAVE_ABI_CALLEE_REGS
 .endm
 
-/*--------------------------------------------------------------
- * Opposite of SAVE_CALLEE_SAVED_KERNEL
- *-------------------------------------------------------------*/
 .macro RESTORE_CALLEE_SAVED_KERNEL
-
-#ifdef CONFIG_ARC_CURR_IN_REG
-	add     sp, sp, 4  /* skip usual r25 placeholder */
-#else
-	POP	r25
-#endif
-	RESTORE_R24_TO_R13
-.endm
-
-/*--------------------------------------------------------------
- * Opposite of SAVE_CALLEE_SAVED_USER
- *
- * ptrace tracer or unaligned-access fixup might have changed a user mode
- * callee reg which is saved back to usual r25 storage location
- *-------------------------------------------------------------*/
-.macro RESTORE_CALLEE_SAVED_USER
-
-#ifdef CONFIG_ARC_CURR_IN_REG
-	POP	r12
-#else
-	POP	r25
-#endif
-	RESTORE_R24_TO_R13
-
-	; SP is back to start of pt_regs
-#ifdef CONFIG_ARC_CURR_IN_REG
-	st	r12, [sp, PT_user_r25]
-#endif
+	RESTORE_ABI_CALLEE_REGS
 .endm
 
 /*--------------------------------------------------------------
@@ -204,7 +56,7 @@
 .endm
 
 /*-------------------------------------------------------------
- * given a tsk struct, get to the base of it's kernel mode stack
+ * given a tsk struct, get to the base of its kernel mode stack
  * tsk->thread_info is really a PAGE, whose bottom hoists stack
  * which grows upwards towards thread_info
  *------------------------------------------------------------*/
@@ -229,10 +81,10 @@
 
 #ifdef CONFIG_SMP
 
-/*-------------------------------------------------
+/*
  * Retrieve the current running task on this CPU
- * 1. Determine curr CPU id.
- * 2. Use it to index into _current_task[ ]
+ *  - loads it from backing _current_task[] (and can't use the
+ *    caching reg for current task
  */
 .macro  GET_CURR_TASK_ON_CPU   reg
 	GET_CPU_ID  \reg
@@ -254,7 +106,7 @@
 	add2 \tmp, @_current_task, \tmp
 	st   \tsk, [\tmp]
 #ifdef CONFIG_ARC_CURR_IN_REG
-	mov r25, \tsk
+	mov gp, \tsk
 #endif
 
 .endm
@@ -269,21 +121,20 @@
 .macro  SET_CURR_TASK_ON_CPU    tsk, tmp
 	st  \tsk, [@_current_task]
 #ifdef CONFIG_ARC_CURR_IN_REG
-	mov r25, \tsk
+	mov gp, \tsk
 #endif
 .endm
 
 #endif /* SMP / UNI */
 
-/* ------------------------------------------------------------------
+/*
  * Get the ptr to some field of Current Task at @off in task struct
- *  -Uses r25 for Current task ptr if that is enabled
+ *  - Uses current task cached in reg if enabled
  */
-
 #ifdef CONFIG_ARC_CURR_IN_REG
 
 .macro GET_CURR_TASK_FIELD_PTR  off,  reg
-	add \reg, r25, \off
+	add \reg, gp, \off
 .endm
 
 #else
@@ -295,4 +146,23 @@
 
 #endif	/* CONFIG_ARC_CURR_IN_REG */
 
+#else	/* !__ASSEMBLER__ */
+
+extern void do_signal(struct pt_regs *);
+extern void do_notify_resume(struct pt_regs *);
+extern int do_privilege_fault(unsigned long, struct pt_regs *);
+extern int do_extension_fault(unsigned long, struct pt_regs *);
+extern int insterror_is_error(unsigned long, struct pt_regs *);
+extern int do_memory_error(unsigned long, struct pt_regs *);
+extern int trap_is_brkpt(unsigned long, struct pt_regs *);
+extern int do_misaligned_error(unsigned long, struct pt_regs *);
+extern int do_trap5_error(unsigned long, struct pt_regs *);
+extern int do_misaligned_access(unsigned long, struct pt_regs *, struct callee_regs *);
+extern void do_machine_check_fault(unsigned long, struct pt_regs *);
+extern void do_non_swi_trap(unsigned long, struct pt_regs *);
+extern void do_insterror_or_kprobe(unsigned long, struct pt_regs *);
+extern void do_page_fault(unsigned long, struct pt_regs *);
+
+#endif
+
 #endif  /* __ASM_ARC_ENTRY_H */
diff --git a/arch/arc/include/asm/fb.h b/arch/arc/include/asm/fb.h
deleted file mode 100644
index dc2e303cdbbb..000000000000
--- a/arch/arc/include/asm/fb.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
-				unsigned long off)
-{
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-}
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/arch/arc/include/asm/hugepage.h b/arch/arc/include/asm/hugepage.h
index 5001b796fb8d..7765dc105d54 100644
--- a/arch/arc/include/asm/hugepage.h
+++ b/arch/arc/include/asm/hugepage.h
@@ -10,6 +10,13 @@
 #include <linux/types.h>
 #include <asm-generic/pgtable-nopmd.h>
 
+/*
+ * Hugetlb definitions.
+ */
+#define HPAGE_SHIFT		PMD_SHIFT
+#define HPAGE_SIZE		(_AC(1, UL) << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
+
 static inline pte_t pmd_pte(pmd_t pmd)
 {
 	return __pte(pmd_val(pmd));
@@ -21,7 +28,7 @@ static inline pmd_t pte_pmd(pte_t pte)
 }
 
 #define pmd_wrprotect(pmd)	pte_pmd(pte_wrprotect(pmd_pte(pmd)))
-#define pmd_mkwrite(pmd)	pte_pmd(pte_mkwrite(pmd_pte(pmd)))
+#define pmd_mkwrite_novma(pmd)	pte_pmd(pte_mkwrite_novma(pmd_pte(pmd)))
 #define pmd_mkdirty(pmd)	pte_pmd(pte_mkdirty(pmd_pte(pmd)))
 #define pmd_mkold(pmd)		pte_pmd(pte_mkold(pmd_pte(pmd)))
 #define pmd_mkyoung(pmd)	pte_pmd(pte_mkyoung(pmd_pte(pmd)))
@@ -33,8 +40,6 @@ static inline pmd_t pte_pmd(pte_t pte)
 #define pmd_young(pmd)		pte_young(pmd_pte(pmd))
 #define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
 
-#define mk_pmd(page, prot)	pte_pmd(mk_pte(page, prot))
-
 #define pmd_trans_huge(pmd)	(pmd_val(pmd) & _PAGE_HW_SZ)
 
 #define pfn_pmd(pfn, prot)	(__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index 8f777d6441a5..00171a212b3c 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -9,7 +9,7 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 #include <asm/page.h>
-#include <asm/unaligned.h>
+#include <linux/unaligned.h>
 
 #ifdef CONFIG_ISA_ARCV2
 #include <asm/barrier.h>
@@ -21,8 +21,9 @@
 #endif
 
 extern void __iomem *ioremap(phys_addr_t paddr, unsigned long size);
-extern void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
-				  unsigned long flags);
+#define ioremap ioremap
+#define ioremap_prot ioremap_prot
+#define iounmap iounmap
 static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
 {
 	return (void __iomem *)port;
@@ -32,8 +33,6 @@ static inline void ioport_unmap(void __iomem *addr)
 {
 }
 
-extern void iounmap(const void __iomem *addr);
-
 /*
  * io{read,write}{16,32}be() macros
  */
@@ -43,9 +42,6 @@ extern void iounmap(const void __iomem *addr);
 #define iowrite16be(v,p)	({ __iowmb(); __raw_writew((__force u16)cpu_to_be16(v), p); })
 #define iowrite32be(v,p)	({ __iowmb(); __raw_writel((__force u32)cpu_to_be32(v), p); })
 
-/* Change struct page to physical address */
-#define page_to_phys(page)		(page_to_pfn(page) << PAGE_SHIFT)
-
 #define __raw_readb __raw_readb
 static inline u8 __raw_readb(const volatile void __iomem *addr)
 {
diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h
index 0309cb405cfb..9cd79263acba 100644
--- a/arch/arc/include/asm/irq.h
+++ b/arch/arc/include/asm/irq.h
@@ -10,7 +10,7 @@
  * ARCv2 can support 240 interrupts in the core interrupts controllers and
  * 128 interrupts in IDU. Thus 512 virtual IRQs must be enough for most
  * configurations of boards.
- * This doesnt affect ARCompact, but we change it to same value
+ * This doesn't affect ARCompact, but we change it to same value
  */
 #define NR_IRQS		512
 
@@ -25,5 +25,6 @@
 #include <asm-generic/irq.h>
 
 extern void arc_init_IRQ(void);
+extern void arch_do_IRQ(unsigned int, struct pt_regs *);
 
 #endif
diff --git a/arch/arc/include/asm/irqflags-arcv2.h b/arch/arc/include/asm/irqflags-arcv2.h
index fb3c21f1a238..30aea562f8aa 100644
--- a/arch/arc/include/asm/irqflags-arcv2.h
+++ b/arch/arc/include/asm/irqflags-arcv2.h
@@ -50,7 +50,7 @@
 #define ISA_INIT_STATUS_BITS	(STATUS_IE_MASK | __AD_ENB | \
 					(ARCV2_IRQ_DEF_PRIO << 1))
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * Save IRQ state and disable IRQs
@@ -170,6 +170,6 @@ static inline void arc_softirq_clear(int irq)
 	seti
 .endm
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/irqflags-compact.h b/arch/arc/include/asm/irqflags-compact.h
index 0d63e568d64c..85c2f6bcde0c 100644
--- a/arch/arc/include/asm/irqflags-compact.h
+++ b/arch/arc/include/asm/irqflags-compact.h
@@ -40,13 +40,13 @@
 
 #define ISA_INIT_STATUS_BITS	STATUS_IE_MASK
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /******************************************************************
  * IRQ Control Macros
  *
  * All of them have "memory" clobber (compiler barrier) which is needed to
- * ensure that LD/ST requiring irq safetly (R-M-W when LLSC is not available)
+ * ensure that LD/ST requiring irq safety (R-M-W when LLSC is not available)
  * are redone after IRQs are re-enabled (and gcc doesn't reuse stale register)
  *
  * Noted at the time of Abilis Timer List corruption
@@ -196,6 +196,6 @@ static inline int arch_irqs_disabled(void)
 	flag	\scratch
 .endm
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/jump_label.h b/arch/arc/include/asm/jump_label.h
index 9d9618079739..66ead75784d9 100644
--- a/arch/arc/include/asm/jump_label.h
+++ b/arch/arc/include/asm/jump_label.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_ARC_JUMP_LABEL_H
 #define _ASM_ARC_JUMP_LABEL_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/stringify.h>
 #include <linux/types.h>
@@ -31,7 +31,7 @@
 static __always_inline bool arch_static_branch(struct static_key *key,
 					       bool branch)
 {
-	asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"	\n"
+	asm goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"		\n"
 		 "1:							\n"
 		 "nop							\n"
 		 ".pushsection __jump_table, \"aw\"			\n"
@@ -47,7 +47,7 @@ l_yes:
 static __always_inline bool arch_static_branch_jump(struct static_key *key,
 						    bool branch)
 {
-	asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"	\n"
+	asm goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"		\n"
 		 "1:							\n"
 		 "b %l[l_yes]						\n"
 		 ".pushsection __jump_table, \"aw\"			\n"
@@ -68,5 +68,5 @@ struct jump_entry {
 	jump_label_t key;
 };
 
-#endif  /* __ASSEMBLY__ */
+#endif  /* __ASSEMBLER__ */
 #endif
diff --git a/arch/arc/include/asm/kprobes.h b/arch/arc/include/asm/kprobes.h
index de1566e32cb8..68e8301c0df2 100644
--- a/arch/arc/include/asm/kprobes.h
+++ b/arch/arc/include/asm/kprobes.h
@@ -32,9 +32,6 @@ struct kprobe;
 
 void arch_remove_kprobe(struct kprobe *p);
 
-int kprobe_exceptions_notify(struct notifier_block *self,
-			     unsigned long val, void *data);
-
 struct prev_kprobe {
 	struct kprobe *kp;
 	unsigned long status;
diff --git a/arch/arc/include/asm/linkage.h b/arch/arc/include/asm/linkage.h
index c9434ff3aa4c..ba3cb65b5eaa 100644
--- a/arch/arc/include/asm/linkage.h
+++ b/arch/arc/include/asm/linkage.h
@@ -8,7 +8,11 @@
 
 #include <asm/dwarf.h>
 
-#ifdef __ASSEMBLY__
+#define ASM_NL		 `	/* use '`' to mark new line in macro */
+#define __ALIGN		.align 4
+#define __ALIGN_STR	__stringify(__ALIGN)
+
+#ifdef __ASSEMBLER__
 
 .macro ST2 e, o, off
 #ifdef CONFIG_ARC_HAS_LL64
@@ -28,10 +32,6 @@
 #endif
 .endm
 
-#define ASM_NL		 `	/* use '`' to mark new line in macro */
-#define __ALIGN		.align 4
-#define __ALIGN_STR	__stringify(__ALIGN)
-
 /* annotation for data we want in DCCM - if enabled in .config */
 .macro ARCFP_DATA nm
 #ifdef CONFIG_ARC_HAS_DCCM
@@ -61,7 +61,7 @@
 	CFI_ENDPROC ASM_NL	\
 	.size name, .-name
 
-#else	/* !__ASSEMBLY__ */
+#else	/* !__ASSEMBLER__ */
 
 #ifdef CONFIG_ARC_HAS_ICCM
 #define __arcfp_code __section(".text.arcfp")
@@ -75,6 +75,6 @@
 #define __arcfp_data __section(".data")
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/mmu-arcv2.h b/arch/arc/include/asm/mmu-arcv2.h
index ed9036d4ede3..5e5482026ac9 100644
--- a/arch/arc/include/asm/mmu-arcv2.h
+++ b/arch/arc/include/asm/mmu-arcv2.h
@@ -9,6 +9,8 @@
 #ifndef _ASM_ARC_MMU_ARCV2_H
 #define _ASM_ARC_MMU_ARCV2_H
 
+#include <soc/arc/arc_aux.h>
+
 /*
  * TLB Management regs
  */
@@ -67,7 +69,7 @@
 
 #define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK_PHYS | _PAGE_CACHEABLE)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct mm_struct;
 extern int pae40_exist_but_not_enab(void);
@@ -98,6 +100,6 @@ static inline void mmu_setup_pgd(struct mm_struct *mm, void *pgd)
 	sr \reg, [ARC_REG_PID]
 .endm
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h
index ca427c30f70e..e3b35ceab582 100644
--- a/arch/arc/include/asm/mmu.h
+++ b/arch/arc/include/asm/mmu.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_MMU_H
 #define _ASM_ARC_MMU_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/threads.h>	/* NR_CPUS */
 
@@ -14,6 +14,9 @@ typedef struct {
 	unsigned long asid[NR_CPUS];	/* 8 bit MMU PID + Generation cycle */
 } mm_context_t;
 
+struct pt_regs;
+extern void do_tlb_overlap_fault(unsigned long, unsigned long, struct pt_regs *);
+
 #endif
 
 #include <asm/mmu-arcv2.h>
diff --git a/arch/arc/include/asm/mmu_context.h b/arch/arc/include/asm/mmu_context.h
index dda471f5f05b..9963bb1a5733 100644
--- a/arch/arc/include/asm/mmu_context.h
+++ b/arch/arc/include/asm/mmu_context.h
@@ -165,7 +165,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
  * for retiring-mm. However destroy_context( ) still needs to do that because
  * between mm_release( ) = >deactive_mm( ) and
  * mmput => .. => __mmdrop( ) => destroy_context( )
- * there is a good chance that task gets sched-out/in, making it's ASID valid
+ * there is a good chance that task gets sched-out/in, making its ASID valid
  * again (this teased me for a whole day).
  */
 
diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h
index 9a62e1d87967..9720fe6b2c24 100644
--- a/arch/arc/include/asm/page.h
+++ b/arch/arc/include/asm/page.h
@@ -19,7 +19,7 @@
 
 #endif /* CONFIG_ARC_HAS_PAE40 */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define clear_page(paddr)		memset((paddr), 0, PAGE_SIZE)
 #define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
@@ -85,15 +85,6 @@ typedef struct {
 typedef struct page *pgtable_t;
 
 /*
- * Use virt_to_pfn with caution:
- * If used in pte or paddr related macros, it could cause truncation
- * in PAE40 builds
- * As a rule of thumb, only use it in helpers starting with virt_
- * You have been warned !
- */
-#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
-
-/*
  * When HIGHMEM is enabled we have holes in the memory map so we need
  * pfn_valid() that takes into account the actual extents of the physical
  * memory
@@ -108,8 +99,7 @@ extern int pfn_valid(unsigned long pfn);
 
 #else /* CONFIG_HIGHMEM */
 
-#define ARCH_PFN_OFFSET		virt_to_pfn(CONFIG_LINUX_RAM_BASE)
-#define pfn_valid(pfn)		(((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
+#define ARCH_PFN_OFFSET		virt_to_pfn((void *)CONFIG_LINUX_RAM_BASE)
 
 #endif /* CONFIG_HIGHMEM */
 
@@ -123,6 +113,18 @@ extern int pfn_valid(unsigned long pfn);
 #define __pa(vaddr)  		((unsigned long)(vaddr))
 #define __va(paddr)  		((void *)((unsigned long)(paddr)))
 
+/*
+ * Use virt_to_pfn with caution:
+ * If used in pte or paddr related macros, it could cause truncation
+ * in PAE40 builds
+ * As a rule of thumb, only use it in helpers starting with virt_
+ * You have been warned !
+ */
+static inline unsigned long virt_to_pfn(const void *kaddr)
+{
+	return __pa(kaddr) >> PAGE_SHIFT;
+}
+
 #define virt_to_page(kaddr)	pfn_to_page(virt_to_pfn(kaddr))
 #define virt_addr_valid(kaddr)  pfn_valid(virt_to_pfn(kaddr))
 
@@ -134,6 +136,6 @@ extern int pfn_valid(unsigned long pfn);
 #include <asm-generic/memory_model.h>   /* page_to_pfn, pfn_to_page */
 #include <asm-generic/getorder.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/pgalloc.h b/arch/arc/include/asm/pgalloc.h
index 096b8ef58edb..dfae070fe8d5 100644
--- a/arch/arc/include/asm/pgalloc.h
+++ b/arch/arc/include/asm/pgalloc.h
@@ -53,19 +53,14 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte_
 
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	pgd_t *ret = (pgd_t *) __get_free_page(GFP_KERNEL);
+	pgd_t *ret = __pgd_alloc(mm, 0);
 
 	if (ret) {
 		int num, num2;
-		num = USER_PTRS_PER_PGD + USER_KERNEL_GUTTER / PGDIR_SIZE;
-		memzero(ret, num * sizeof(pgd_t));
 
+		num = USER_PTRS_PER_PGD + USER_KERNEL_GUTTER / PGDIR_SIZE;
 		num2 = VMALLOC_SIZE / PGDIR_SIZE;
 		memcpy(ret + num, swapper_pg_dir + num, num2 * sizeof(pgd_t));
-
-		memzero(ret + num + num2,
-			       (PTRS_PER_PGD - num - num2) * sizeof(pgd_t));
-
 	}
 	return ret;
 }
diff --git a/arch/arc/include/asm/pgtable-bits-arcv2.h b/arch/arc/include/asm/pgtable-bits-arcv2.h
index b23be557403e..4630c5acca05 100644
--- a/arch/arc/include/asm/pgtable-bits-arcv2.h
+++ b/arch/arc/include/asm/pgtable-bits-arcv2.h
@@ -26,6 +26,9 @@
 #define _PAGE_GLOBAL		(1 << 8)  /* ASID agnostic (H) */
 #define _PAGE_PRESENT		(1 << 9)  /* PTE/TLB Valid (H) */
 
+/* We borrow bit 5 to store the exclusive marker in swap PTEs. */
+#define _PAGE_SWP_EXCLUSIVE	_PAGE_DIRTY
+
 #ifdef CONFIG_ARC_MMU_V4
 #define _PAGE_HW_SZ		(1 << 10)  /* Normal/super (H) */
 #else
@@ -63,7 +66,7 @@
  * Other rules which cause the divergence from 1:1 mapping
  *
  *  1. Although ARC700 can do exclusive execute/write protection (meaning R
- *     can be tracked independet of X/W unlike some other CPUs), still to
+ *     can be tracked independently of X/W unlike some other CPUs), still to
  *     keep things consistent with other archs:
  *      -Write implies Read:   W => R
  *      -Execute implies Read: X => R
@@ -72,7 +75,7 @@
  *     This is to enable COW mechanism
  */
 	/* xwr */
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define pte_write(pte)		(pte_val(pte) & _PAGE_WRITE)
 #define pte_dirty(pte)		(pte_val(pte) & _PAGE_DIRTY)
@@ -84,7 +87,7 @@
 
 PTE_BIT_FUNC(mknotpresent,     &= ~(_PAGE_PRESENT));
 PTE_BIT_FUNC(wrprotect,	&= ~(_PAGE_WRITE));
-PTE_BIT_FUNC(mkwrite,	|= (_PAGE_WRITE));
+PTE_BIT_FUNC(mkwrite_novma,	|= (_PAGE_WRITE));
 PTE_BIT_FUNC(mkclean,	&= ~(_PAGE_DIRTY));
 PTE_BIT_FUNC(mkdirty,	|= (_PAGE_DIRTY));
 PTE_BIT_FUNC(mkold,	&= ~(_PAGE_ACCESSED));
@@ -97,18 +100,25 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
 }
 
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep, pte_t pteval)
-{
-	set_pte(ptep, pteval);
-}
+struct vm_fault;
+void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
+		unsigned long address, pte_t *ptep, unsigned int nr);
 
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
-		      pte_t *ptep);
+#define update_mmu_cache(vma, addr, ptep) \
+	update_mmu_cache_range(NULL, vma, addr, ptep, 1)
 
-/* Encode swap {type,off} tuple into PTE
- * We reserve 13 bits for 5-bit @type, keeping bits 12-5 zero, ensuring that
- * PAGE_PRESENT is zero in a PTE holding swap "identifier"
+/*
+ * Encode/decode swap entries and swap PTEs. Swap PTEs are all PTEs that
+ * are !pte_none() && !pte_present().
+ *
+ * Format of swap PTEs:
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <-------------- offset -------------> <--- zero --> E < type ->
+ *
+ *   E is the exclusive marker that is not stored in swap entries.
+ *   The zero'ed bits include _PAGE_PRESENT.
  */
 #define __swp_entry(type, off)		((swp_entry_t) \
 					{ ((type) & 0x1f) | ((off) << 13) })
@@ -120,12 +130,18 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
 #define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)		((pte_t) { (x).val })
 
-#define kern_addr_valid(addr)	(1)
+static inline bool pte_swp_exclusive(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
+}
+
+PTE_BIT_FUNC(swp_mkexclusive, |= (_PAGE_SWP_EXCLUSIVE));
+PTE_BIT_FUNC(swp_clear_exclusive, &= ~(_PAGE_SWP_EXCLUSIVE));
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #include <asm/hugepage.h>
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/pgtable-levels.h b/arch/arc/include/asm/pgtable-levels.h
index 64ca25d199be..c8f9273372c0 100644
--- a/arch/arc/include/asm/pgtable-levels.h
+++ b/arch/arc/include/asm/pgtable-levels.h
@@ -85,7 +85,7 @@
 
 #define PTRS_PER_PTE		BIT(PMD_SHIFT - PAGE_SHIFT)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #if CONFIG_PGTABLE_LEVELS > 3
 #include <asm-generic/pgtable-nop4d.h>
@@ -142,7 +142,6 @@
 
 #define pmd_pfn(pmd)		((pmd_val(pmd) & PMD_MASK) >> PAGE_SHIFT)
 #define pfn_pmd(pfn,prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define mk_pmd(page,prot)	pfn_pmd(page_to_pfn(page),prot)
 
 #endif
 
@@ -159,9 +158,9 @@
 #define pmd_clear(xp)		do { pmd_val(*(xp)) = 0; } while (0)
 #define pmd_page_vaddr(pmd)	(pmd_val(pmd) & PAGE_MASK)
 #define pmd_pfn(pmd)		((pmd_val(pmd) & PAGE_MASK) >> PAGE_SHIFT)
-#define pmd_page(pmd)		virt_to_page(pmd_page_vaddr(pmd))
+#define pmd_page(pmd)		virt_to_page((void *)pmd_page_vaddr(pmd))
 #define set_pmd(pmdp, pmd)	(*(pmdp) = pmd)
-#define pmd_pgtable(pmd)	((pgtable_t) pmd_page_vaddr(pmd))
+#define pmd_pgtable(pmd)	((pgtable_t) pmd_page(pmd))
 
 /*
  * 4th level paging: pte
@@ -169,6 +168,7 @@
 #define pte_ERROR(e) \
 	pr_crit("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
 
+#define PFN_PTE_SHIFT		PAGE_SHIFT
 #define pte_none(x)		(!pte_val(x))
 #define pte_present(x)		(pte_val(x) & _PAGE_PRESENT)
 #define pte_clear(mm,addr,ptep)	set_pte_at(mm, addr, ptep, __pte(0))
@@ -176,12 +176,11 @@
 #define set_pte(ptep, pte)	((*(ptep)) = (pte))
 #define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
 #define pfn_pte(pfn, prot)	__pte(__pfn_to_phys(pfn) | pgprot_val(prot))
-#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
 
 #ifdef CONFIG_ISA_ARCV2
 #define pmd_leaf(x)		(pmd_val(x) & _PAGE_HW_SZ)
 #endif
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
index 4cf45a99fd79..bd580e2b62d7 100644
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -19,7 +19,7 @@
  */
 #define	USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 extern char empty_zero_page[PAGE_SIZE];
 #define ZERO_PAGE(vaddr)	(virt_to_page(empty_zero_page))
@@ -29,6 +29,6 @@ extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE);
 /* to cope with aliasing VIPT cache */
 #define HAVE_ARCH_UNMAPPED_AREA
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
index 54db9d7bb562..7f7901ac6643 100644
--- a/arch/arc/include/asm/processor.h
+++ b/arch/arc/include/asm/processor.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARC_PROCESSOR_H
 #define __ASM_ARC_PROCESSOR_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/ptrace.h>
 #include <asm/dsp.h>
@@ -22,7 +22,6 @@
  * struct thread_info
  */
 struct thread_struct {
-	unsigned long ksp;	/* kernel mode stack pointer */
 	unsigned long callee_reg;	/* pointer to callee regs */
 	unsigned long fault_address;	/* dbls as brkpt holder as well */
 #ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS
@@ -33,9 +32,7 @@ struct thread_struct {
 #endif
 };
 
-#define INIT_THREAD  {                          \
-	.ksp = sizeof(init_stack) + (unsigned long) init_stack, \
-}
+#define INIT_THREAD  { }
 
 /* Forward declaration, a strange C thing */
 struct task_struct;
@@ -43,9 +40,6 @@ struct task_struct;
 #define task_pt_regs(p) \
 	((struct pt_regs *)(THREAD_SIZE + (void *)task_stack_page(p)) - 1)
 
-/* Free all resources held by a thread */
-#define release_thread(thread) do { } while (0)
-
 /*
  * A lot of busy-wait loops in SMP are based off of non-volatile data otherwise
  * get optimised away by gcc
@@ -59,7 +53,7 @@ struct task_struct;
  * Where about of Task's sp, fp, blink when it was last seen in kernel mode.
  * Look in process.c for details of kernel stack layout
  */
-#define TSK_K_ESP(tsk)		(tsk->thread.ksp)
+#define TSK_K_ESP(tsk)		(task_thread_info(tsk)->ksp)
 
 #define TSK_K_REG(tsk, off)	(*((unsigned long *)(TSK_K_ESP(tsk) + \
 					sizeof(struct callee_regs) + off)))
@@ -72,7 +66,7 @@ extern void start_thread(struct pt_regs * regs, unsigned long pc,
 
 extern unsigned int __get_wchan(struct task_struct *p);
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * Default System Memory Map on ARC
diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h
index 5869a74c0db2..f6c052af8f4d 100644
--- a/arch/arc/include/asm/ptrace.h
+++ b/arch/arc/include/asm/ptrace.h
@@ -10,7 +10,18 @@
 #include <uapi/asm/ptrace.h>
 #include <linux/compiler.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
+
+typedef union {
+	struct {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+		unsigned long state:8, vec:8, cause:8, param:8;
+#else
+		unsigned long param:8, cause:8, vec:8, state:8;
+#endif
+	};
+	unsigned long full;
+} ecr_reg;
 
 /* THE pt_regs: Defines how regs are saved during entry into kernel */
 
@@ -40,23 +51,14 @@ struct pt_regs {
 	 * 	Last word used by Linux for extra state mgmt (syscall-restart)
 	 * For interrupts, use artificial ECR values to note current prio-level
 	 */
-	union {
-		struct {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-			unsigned long state:8, ecr_vec:8,
-				      ecr_cause:8, ecr_param:8;
-#else
-			unsigned long ecr_param:8, ecr_cause:8,
-				      ecr_vec:8, state:8;
-#endif
-		};
-		unsigned long event;
-	};
+	ecr_reg ecr;
+};
 
-	unsigned long user_r25;
+struct callee_regs {
+	unsigned long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
 };
 
-#define MAX_REG_OFFSET offsetof(struct pt_regs, user_r25)
+#define MAX_REG_OFFSET offsetof(struct pt_regs, ecr)
 
 #else
 
@@ -64,28 +66,14 @@ struct pt_regs {
 
 	unsigned long orig_r0;
 
-	union {
-		struct {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-			unsigned long state:8, ecr_vec:8,
-				      ecr_cause:8, ecr_param:8;
-#else
-			unsigned long ecr_param:8, ecr_cause:8,
-				      ecr_vec:8, state:8;
-#endif
-		};
-		unsigned long event;
-	};
-
-	unsigned long bta;	/* bta_l1, bta_l2, erbta */
+	ecr_reg ecr;		/* Exception Cause Reg */
 
-	unsigned long user_r25;
+	unsigned long bta;	/* erbta */
 
-	unsigned long r26;	/* gp */
 	unsigned long fp;
-	unsigned long sp;	/* user/kernel sp depending on where we came from  */
-
-	unsigned long r12, r30;
+	unsigned long r30;
+	unsigned long r12;
+	unsigned long r26;	/* gp */
 
 #ifdef CONFIG_ARC_HAS_ACCL_REGS
 	unsigned long r58, r59;	/* ACCL/ACCH used by FPU / DSP MPY */
@@ -94,6 +82,8 @@ struct pt_regs {
 	unsigned long DSP_CTRL;
 #endif
 
+	unsigned long sp;	/* user/kernel sp depending on entry  */
+
 	/*------- Below list auto saved by h/w -----------*/
 	unsigned long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11;
 
@@ -106,16 +96,14 @@ struct pt_regs {
 	unsigned long status32;
 };
 
-#define MAX_REG_OFFSET offsetof(struct pt_regs, status32)
-
-#endif
-
-/* Callee saved registers - need to be saved only when you are scheduled out */
-
 struct callee_regs {
 	unsigned long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
 };
 
+#define MAX_REG_OFFSET offsetof(struct pt_regs, status32)
+
+#endif
+
 #define instruction_pointer(regs)	((regs)->ret)
 #define profile_pc(regs)		instruction_pointer(regs)
 
@@ -134,13 +122,13 @@ struct callee_regs {
 /* return 1 if PC in delay slot */
 #define delay_mode(regs) ((regs->status32 & STATUS_DE_MASK) == STATUS_DE_MASK)
 
-#define in_syscall(regs)    ((regs->ecr_vec == ECR_V_TRAP) && !regs->ecr_param)
-#define in_brkpt_trap(regs) ((regs->ecr_vec == ECR_V_TRAP) && regs->ecr_param)
+#define in_syscall(regs)    ((regs->ecr.vec == ECR_V_TRAP) && !regs->ecr.param)
+#define in_brkpt_trap(regs) ((regs->ecr.vec == ECR_V_TRAP) && regs->ecr.param)
 
 #define STATE_SCALL_RESTARTED	0x01
 
-#define syscall_wont_restart(reg) (reg->state |= STATE_SCALL_RESTARTED)
-#define syscall_restartable(reg) !(reg->state &  STATE_SCALL_RESTARTED)
+#define syscall_wont_restart(regs) (regs->ecr.state |= STATE_SCALL_RESTARTED)
+#define syscall_restartable(regs) !(regs->ecr.state &  STATE_SCALL_RESTARTED)
 
 #define current_pt_regs()					\
 ({								\
@@ -181,6 +169,9 @@ static inline unsigned long regs_get_register(struct pt_regs *regs,
 	return *(unsigned long *)((unsigned long)regs + offset);
 }
 
-#endif /* !__ASSEMBLY__ */
+extern int syscall_trace_enter(struct pt_regs *);
+extern void syscall_trace_exit(struct pt_regs *);
+
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_PTRACE_H */
diff --git a/arch/arc/include/asm/setup.h b/arch/arc/include/asm/setup.h
index 028a8cf76206..1c6db599e1fc 100644
--- a/arch/arc/include/asm/setup.h
+++ b/arch/arc/include/asm/setup.h
@@ -35,11 +35,11 @@ long __init arc_get_mem_sz(void);
 #define IS_AVAIL3(v, v2, s)	IS_AVAIL1(v, s), IS_AVAIL1(v, IS_DISABLED_RUN(v2))
 
 extern void arc_mmu_init(void);
-extern char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
-extern void read_decode_mmu_bcr(void);
+extern int arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
 
 extern void arc_cache_init(void);
-extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
-extern void read_decode_cache_bcr(void);
+extern int arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
+
+extern void __init handle_uboot_args(void);
 
 #endif /* __ASMARC_SETUP_H */
diff --git a/arch/arc/include/asm/shmparam.h b/arch/arc/include/asm/shmparam.h
index 8b0251464ffd..719112af0f41 100644
--- a/arch/arc/include/asm/shmparam.h
+++ b/arch/arc/include/asm/shmparam.h
@@ -6,7 +6,7 @@
 #ifndef __ARC_ASM_SHMPARAM_H
 #define __ARC_ASM_SHMPARAM_H
 
-/* Handle upto 2 cache bins */
+/* Handle up to 2 cache bins */
 #define	SHMLBA	(2 * PAGE_SIZE)
 
 /* Enforce SHMLBA in shmat */
diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h
index d856491606ac..990f834909f0 100644
--- a/arch/arc/include/asm/smp.h
+++ b/arch/arc/include/asm/smp.h
@@ -29,6 +29,8 @@ extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 extern void __init smp_init_cpus(void);
 extern void first_lines_of_secondary(void);
 extern const char *arc_platform_smp_cpuinfo(void);
+extern void arc_platform_smp_wait_to_boot(int);
+extern void start_kernel_secondary(void);
 
 /*
  * API expected BY platform smp code (FROM arch smp code)
@@ -75,7 +77,7 @@ static inline const char *arc_platform_smp_cpuinfo(void)
 
 /*
  * ARC700 doesn't support atomic Read-Modify-Write ops.
- * Originally Interrupts had to be disabled around code to gaurantee atomicity.
+ * Originally Interrupts had to be disabled around code to guarantee atomicity.
  * The LLOCK/SCOND insns allow writing interrupt-hassle-free based atomic ops
  * based on retry-if-irq-in-atomic (with hardware assist).
  * However despite these, we provide the IRQ disabling variant
@@ -84,7 +86,7 @@ static inline const char *arc_platform_smp_cpuinfo(void)
  *	support needed.
  *
  * (2) In a SMP setup, the LLOCK/SCOND atomicity across CPUs needs to be
- *	gaurantted by the platform (not something which core handles).
+ *	guaranteed by the platform (not something which core handles).
  *	Assuming a platform won't, SMP Linux needs to use spinlocks + local IRQ
  *	disabling for atomicity.
  *
diff --git a/arch/arc/include/asm/switch_to.h b/arch/arc/include/asm/switch_to.h
index 1f85de8288b1..5806106a65f9 100644
--- a/arch/arc/include/asm/switch_to.h
+++ b/arch/arc/include/asm/switch_to.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_SWITCH_TO_H
 #define _ASM_ARC_SWITCH_TO_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/sched.h>
 #include <asm/dsp-impl.h>
diff --git a/arch/arc/include/asm/syscall.h b/arch/arc/include/asm/syscall.h
index 9709256e31c8..728d625a10f1 100644
--- a/arch/arc/include/asm/syscall.h
+++ b/arch/arc/include/asm/syscall.h
@@ -24,6 +24,17 @@ syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
 }
 
 static inline void
+syscall_set_nr(struct task_struct *task, struct pt_regs *regs, int nr)
+{
+	/*
+	 * Unlike syscall_get_nr(), syscall_set_nr() can be called only when
+	 * the target task is stopped for tracing on entering syscall, so
+	 * there is no need to have the same check syscall_get_nr() has.
+	 */
+	regs->r8 = nr;
+}
+
+static inline void
 syscall_rollback(struct task_struct *task, struct pt_regs *regs)
 {
 	regs->r0 = regs->orig_r0;
@@ -67,6 +78,20 @@ syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
 	}
 }
 
+static inline void
+syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+		      unsigned long *args)
+{
+	unsigned long *inside_ptregs = &regs->r0;
+	unsigned int n = 6;
+	unsigned int i = 0;
+
+	while (n--) {
+		*inside_ptregs = args[i++];
+		inside_ptregs--;
+	}
+}
+
 static inline int
 syscall_get_arch(struct task_struct *task)
 {
diff --git a/arch/arc/include/asm/thread_info.h b/arch/arc/include/asm/thread_info.h
index 6ba7fe417095..255d2c774219 100644
--- a/arch/arc/include/asm/thread_info.h
+++ b/arch/arc/include/asm/thread_info.h
@@ -24,7 +24,7 @@
 #define THREAD_SIZE     (PAGE_SIZE << THREAD_SIZE_ORDER)
 #define THREAD_SHIFT	(PAGE_SHIFT << THREAD_SIZE_ORDER)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/thread_info.h>
 
@@ -37,16 +37,16 @@
  */
 struct thread_info {
 	unsigned long flags;		/* low level flags */
-	int preempt_count;		/* 0 => preemptable, <0 => BUG */
-	struct task_struct *task;	/* main task structure */
-	__u32 cpu;			/* current CPU */
+	unsigned long ksp;		/* kernel mode stack top in __switch_to */
+	int preempt_count;		/* 0 => preemptible, <0 => BUG */
+	int cpu;			/* current CPU */
 	unsigned long thr_ptr;		/* TLS ptr */
+	struct task_struct *task;	/* main task structure */
 };
 
 /*
- * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
+ * initilaize thread_info for any @tsk
+ *  - this is not related to init_task per se
  */
 #define INIT_THREAD_INFO(tsk)			\
 {						\
@@ -62,7 +62,7 @@ static inline __attribute_const__ struct thread_info *current_thread_info(void)
 	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * thread information flags
diff --git a/arch/arc/include/asm/uaccess.h b/arch/arc/include/asm/uaccess.h
index 99712471c96a..1e8809ea000a 100644
--- a/arch/arc/include/asm/uaccess.h
+++ b/arch/arc/include/asm/uaccess.h
@@ -146,8 +146,9 @@ raw_copy_from_user(void *to, const void __user *from, unsigned long n)
 	if (n == 0)
 		return 0;
 
-	/* unaligned */
-	if (((unsigned long)to & 0x3) || ((unsigned long)from & 0x3)) {
+	/* fallback for unaligned access when hardware doesn't support */
+	if (!IS_ENABLED(CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS) &&
+	     (((unsigned long)to & 0x3) || ((unsigned long)from & 0x3))) {
 
 		unsigned char tmp;
 
@@ -373,8 +374,9 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long n)
 	if (n == 0)
 		return 0;
 
-	/* unaligned */
-	if (((unsigned long)to & 0x3) || ((unsigned long)from & 0x3)) {
+	/* fallback for unaligned access when hardware doesn't support */
+	if (!IS_ENABLED(CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS) &&
+	     (((unsigned long)to & 0x3) || ((unsigned long)from & 0x3))) {
 
 		unsigned char tmp;
 
@@ -584,7 +586,7 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long n)
 	return res;
 }
 
-static inline unsigned long __arc_clear_user(void __user *to, unsigned long n)
+static inline unsigned long __clear_user(void __user *to, unsigned long n)
 {
 	long res = n;
 	unsigned char *d_char = to;
@@ -626,17 +628,10 @@ static inline unsigned long __arc_clear_user(void __user *to, unsigned long n)
 	return res;
 }
 
-#ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
-
 #define INLINE_COPY_TO_USER
 #define INLINE_COPY_FROM_USER
 
-#define __clear_user(d, n)		__arc_clear_user(d, n)
-#else
-extern unsigned long arc_clear_user_noinline(void __user *to,
-		unsigned long n);
-#define __clear_user(d, n)		arc_clear_user_noinline(d, n)
-#endif
+#define __clear_user			__clear_user
 
 #include <asm-generic/uaccess.h>
 
diff --git a/arch/arc/include/asm/unaligned.h b/arch/arc/include/asm/unaligned.h
deleted file mode 100644
index cf5a02382e0e..000000000000
--- a/arch/arc/include/asm/unaligned.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- */
-
-#ifndef _ASM_ARC_UNALIGNED_H
-#define _ASM_ARC_UNALIGNED_H
-
-/* ARC700 can't handle unaligned Data accesses. */
-
-#include <asm-generic/unaligned.h>
-#include <asm/ptrace.h>
-
-#ifdef CONFIG_ARC_EMUL_UNALIGNED
-int misaligned_fixup(unsigned long address, struct pt_regs *regs,
-		     struct callee_regs *cregs);
-#else
-static inline int
-misaligned_fixup(unsigned long address, struct pt_regs *regs,
-		 struct callee_regs *cregs)
-{
-	/* Not fixed */
-	return 1;
-}
-#endif
-
-#endif /* _ASM_ARC_UNALIGNED_H */
diff --git a/arch/arc/include/asm/unistd.h b/arch/arc/include/asm/unistd.h
new file mode 100644
index 000000000000..211c230d88d6
--- /dev/null
+++ b/arch/arc/include/asm/unistd.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_ARC_UNISTD_H
+#define _ASM_ARC_UNISTD_H
+
+#include <uapi/asm/unistd.h>
+
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_CLONE
+#define __ARCH_WANT_SYS_VFORK
+#define __ARCH_WANT_SYS_FORK
+
+#define NR_syscalls __NR_syscalls
+
+#endif
diff --git a/arch/arc/include/uapi/asm/Kbuild b/arch/arc/include/uapi/asm/Kbuild
index e78470141932..2501e82a1a0a 100644
--- a/arch/arc/include/uapi/asm/Kbuild
+++ b/arch/arc/include/uapi/asm/Kbuild
@@ -1,2 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
+syscall-y += unistd_32.h
+
 generic-y += ucontext.h
diff --git a/arch/arc/include/uapi/asm/page.h b/arch/arc/include/uapi/asm/page.h
index 2a4ad619abfb..4606a326af5c 100644
--- a/arch/arc/include/uapi/asm/page.h
+++ b/arch/arc/include/uapi/asm/page.h
@@ -13,10 +13,8 @@
 #include <linux/const.h>
 
 /* PAGE_SHIFT determines the page size */
-#if defined(CONFIG_ARC_PAGE_SIZE_16K)
-#define PAGE_SHIFT 14
-#elif defined(CONFIG_ARC_PAGE_SIZE_4K)
-#define PAGE_SHIFT 12
+#ifdef __KERNEL__
+#include <vdso/page.h>
 #else
 /*
  * Default 8k
@@ -26,11 +24,10 @@
  * not available
  */
 #define PAGE_SHIFT 13
+#define PAGE_SIZE	_BITUL(PAGE_SHIFT)	/* Default 8K */
+#define PAGE_MASK	(~(PAGE_SIZE-1))
 #endif
 
-#define PAGE_SIZE	_BITUL(PAGE_SHIFT)	/* Default 8K */
 #define PAGE_OFFSET	_AC(0x80000000, UL)	/* Kernel starts at 2G onwrds */
 
-#define PAGE_MASK	(~(PAGE_SIZE-1))
-
 #endif /* _UAPI__ASM_ARC_PAGE_H */
diff --git a/arch/arc/include/uapi/asm/ptrace.h b/arch/arc/include/uapi/asm/ptrace.h
index 2a6eff57f6dd..3ae832db278c 100644
--- a/arch/arc/include/uapi/asm/ptrace.h
+++ b/arch/arc/include/uapi/asm/ptrace.h
@@ -14,7 +14,7 @@
 
 #define PTRACE_GET_THREAD_AREA	25
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * Userspace ABI: Register state needed by
  *  -ptrace (gdbserver)
@@ -53,6 +53,6 @@ struct user_regs_arcv2 {
 	unsigned long r30, r58, r59;
 };
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _UAPI__ASM_ARC_PTRACE_H */
diff --git a/arch/arc/include/uapi/asm/swab.h b/arch/arc/include/uapi/asm/swab.h
index 02109cd48ee1..8d1f1ef44ba7 100644
--- a/arch/arc/include/uapi/asm/swab.h
+++ b/arch/arc/include/uapi/asm/swab.h
@@ -62,7 +62,7 @@
  * 8051fdc4:	st     r2,[r1,20]	; Mem op : save result back to mem
  *
  * Joern suggested a better "C" algorithm which is great since
- * (1) It is portable to any architecure
+ * (1) It is portable to any architecture
  * (2) At the same time it takes advantage of ARC ISA (rotate intrns)
  */
 
diff --git a/arch/arc/include/uapi/asm/unistd.h b/arch/arc/include/uapi/asm/unistd.h
index fa2713ae6bea..cb2905c7c5da 100644
--- a/arch/arc/include/uapi/asm/unistd.h
+++ b/arch/arc/include/uapi/asm/unistd.h
@@ -7,46 +7,4 @@
  * published by the Free Software Foundation.
  */
 
-/******** no-legacy-syscalls-ABI *******/
-
-/*
- * Non-typical guard macro to enable inclusion twice in ARCH sys.c
- * That is how the Generic syscall wrapper generator works
- */
-#if !defined(_UAPI_ASM_ARC_UNISTD_H) || defined(__SYSCALL)
-#define _UAPI_ASM_ARC_UNISTD_H
-
-#define __ARCH_WANT_RENAMEAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SET_GET_RLIMIT
-#define __ARCH_WANT_SYS_EXECVE
-#define __ARCH_WANT_SYS_CLONE
-#define __ARCH_WANT_SYS_CLONE3
-#define __ARCH_WANT_SYS_VFORK
-#define __ARCH_WANT_SYS_FORK
-#define __ARCH_WANT_TIME32_SYSCALLS
-
-#define sys_mmap2 sys_mmap_pgoff
-
-#include <asm-generic/unistd.h>
-
-#define NR_syscalls	__NR_syscalls
-
-/* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */
-#define __NR_sysfs		(__NR_arch_specific_syscall + 3)
-
-/* ARC specific syscall */
-#define __NR_cacheflush		(__NR_arch_specific_syscall + 0)
-#define __NR_arc_settls		(__NR_arch_specific_syscall + 1)
-#define __NR_arc_gettls		(__NR_arch_specific_syscall + 2)
-#define __NR_arc_usr_cmpxchg	(__NR_arch_specific_syscall + 4)
-
-__SYSCALL(__NR_cacheflush, sys_cacheflush)
-__SYSCALL(__NR_arc_settls, sys_arc_settls)
-__SYSCALL(__NR_arc_gettls, sys_arc_gettls)
-__SYSCALL(__NR_arc_usr_cmpxchg, sys_arc_usr_cmpxchg)
-__SYSCALL(__NR_sysfs, sys_sysfs)
-
-#undef __SYSCALL
-
-#endif
+#include <asm/unistd_32.h>
diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
index 8c4fc4b54c14..fa94fff02419 100644
--- a/arch/arc/kernel/Makefile
+++ b/arch/arc/kernel/Makefile
@@ -3,8 +3,10 @@
 # Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
 #
 
-obj-y	:= arcksyms.o setup.o irq.o reset.o ptrace.o process.o devtree.o
+obj-y	:= head.o arcksyms.o setup.o irq.o reset.o ptrace.o process.o devtree.o
 obj-y	+= signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o
+obj-y	+= ctx_sw_asm.o
+
 obj-$(CONFIG_ISA_ARCOMPACT)		+= entry-compact.o intc-compact.o
 obj-$(CONFIG_ISA_ARCV2)			+= entry-arcv2.o intc-arcv2.o
 
@@ -24,11 +26,4 @@ ifdef CONFIG_ISA_ARCOMPACT
 CFLAGS_fpu.o   += -mdpfp
 endif
 
-ifdef CONFIG_ARC_DW2_UNWIND
-CFLAGS_ctx_sw.o += -fno-omit-frame-pointer
-obj-y += ctx_sw.o
-else
-obj-y += ctx_sw_asm.o
-endif
-
-extra-y := vmlinux.lds head.o
+always-$(KBUILD_BUILTIN) := vmlinux.lds
diff --git a/arch/arc/kernel/Makefile.syscalls b/arch/arc/kernel/Makefile.syscalls
new file mode 100644
index 000000000000..391d30ab7a83
--- /dev/null
+++ b/arch/arc/kernel/Makefile.syscalls
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+syscall_abis_32 += arc time32 renameat stat64 rlimit
diff --git a/arch/arc/kernel/asm-offsets.c b/arch/arc/kernel/asm-offsets.c
index 0e884036ab74..2978da85fcb6 100644
--- a/arch/arc/kernel/asm-offsets.c
+++ b/arch/arc/kernel/asm-offsets.c
@@ -2,6 +2,7 @@
 /*
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  */
+#define COMPILE_OFFSETS
 
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -20,13 +21,13 @@ int main(void)
 
 	BLANK();
 
-	DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
 	DEFINE(THREAD_CALLEE_REG, offsetof(struct thread_struct, callee_reg));
 	DEFINE(THREAD_FAULT_ADDR,
 	       offsetof(struct thread_struct, fault_address));
 
 	BLANK();
 
+	DEFINE(THREAD_INFO_KSP, offsetof(struct thread_info, ksp));
 	DEFINE(THREAD_INFO_FLAGS, offsetof(struct thread_info, flags));
 	DEFINE(THREAD_INFO_PREEMPT_COUNT,
 	       offsetof(struct thread_info, preempt_count));
@@ -46,7 +47,8 @@ int main(void)
 	BLANK();
 
 	DEFINE(PT_status32, offsetof(struct pt_regs, status32));
-	DEFINE(PT_event, offsetof(struct pt_regs, event));
+	DEFINE(PT_event, offsetof(struct pt_regs, ecr));
+	DEFINE(PT_bta, offsetof(struct pt_regs, bta));
 	DEFINE(PT_sp, offsetof(struct pt_regs, sp));
 	DEFINE(PT_r0, offsetof(struct pt_regs, r0));
 	DEFINE(PT_r1, offsetof(struct pt_regs, r1));
@@ -61,13 +63,9 @@ int main(void)
 	DEFINE(PT_r26, offsetof(struct pt_regs, r26));
 	DEFINE(PT_ret, offsetof(struct pt_regs, ret));
 	DEFINE(PT_blink, offsetof(struct pt_regs, blink));
+	OFFSET(PT_fp, pt_regs, fp);
 	DEFINE(PT_lpe, offsetof(struct pt_regs, lp_end));
 	DEFINE(PT_lpc, offsetof(struct pt_regs, lp_count));
-	DEFINE(PT_user_r25, offsetof(struct pt_regs, user_r25));
-
-	DEFINE(SZ_CALLEE_REGS, sizeof(struct callee_regs));
-	DEFINE(SZ_PT_REGS, sizeof(struct pt_regs));
-
 #ifdef CONFIG_ISA_ARCV2
 	OFFSET(PT_r12, pt_regs, r12);
 	OFFSET(PT_r30, pt_regs, r30);
@@ -80,5 +78,8 @@ int main(void)
 	OFFSET(PT_DSP_CTRL, pt_regs, DSP_CTRL);
 #endif
 
+	DEFINE(SZ_CALLEE_REGS, sizeof(struct callee_regs));
+	DEFINE(SZ_PT_REGS, sizeof(struct pt_regs));
+
 	return 0;
 }
diff --git a/arch/arc/kernel/ctx_sw.c b/arch/arc/kernel/ctx_sw.c
deleted file mode 100644
index 1a76f2d6f694..000000000000
--- a/arch/arc/kernel/ctx_sw.c
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- *
- * Vineetg: Aug 2009
- *  -"C" version of lowest level context switch asm macro called by schedular
- *   gcc doesn't generate the dward CFI info for hand written asm, hence can't
- *   backtrace out of it (e.g. tasks sleeping in kernel).
- *   So we cheat a bit by writing almost similar code in inline-asm.
- *  -This is a hacky way of doing things, but there is no other simple way.
- *   I don't want/intend to extend unwinding code to understand raw asm
- */
-
-#include <asm/asm-offsets.h>
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-
-#define KSP_WORD_OFF 	((TASK_THREAD + THREAD_KSP) / 4)
-
-struct task_struct *__sched
-__switch_to(struct task_struct *prev_task, struct task_struct *next_task)
-{
-	unsigned int tmp;
-	unsigned int prev = (unsigned int)prev_task;
-	unsigned int next = (unsigned int)next_task;
-
-	__asm__ __volatile__(
-		/* FP/BLINK save generated by gcc (standard function prologue */
-		"st.a    r13, [sp, -4]   \n\t"
-		"st.a    r14, [sp, -4]   \n\t"
-		"st.a    r15, [sp, -4]   \n\t"
-		"st.a    r16, [sp, -4]   \n\t"
-		"st.a    r17, [sp, -4]   \n\t"
-		"st.a    r18, [sp, -4]   \n\t"
-		"st.a    r19, [sp, -4]   \n\t"
-		"st.a    r20, [sp, -4]   \n\t"
-		"st.a    r21, [sp, -4]   \n\t"
-		"st.a    r22, [sp, -4]   \n\t"
-		"st.a    r23, [sp, -4]   \n\t"
-		"st.a    r24, [sp, -4]   \n\t"
-#ifndef CONFIG_ARC_CURR_IN_REG
-		"st.a    r25, [sp, -4]   \n\t"
-#else
-		"sub     sp, sp, 4      \n\t"	/* usual r25 placeholder */
-#endif
-
-		/* set ksp of outgoing task in tsk->thread.ksp */
-#if KSP_WORD_OFF <= 255
-		"st.as   sp, [%3, %1]    \n\t"
-#else
-		/*
-		 * Workaround for NR_CPUS=4k
-		 * %1 is bigger than 255 (S9 offset for st.as)
-		 */
-		"add2    r24, %3, %1     \n\t"
-		"st      sp, [r24]       \n\t"
-#endif
-
-		/*
-		 * setup _current_task with incoming tsk.
-		 * optionally, set r25 to that as well
-		 * For SMP extra work to get to &_current_task[cpu]
-		 * (open coded SET_CURR_TASK_ON_CPU)
-		 */
-#ifndef CONFIG_SMP
-		"st  %2, [@_current_task]	\n\t"
-#else
-		"lr   r24, [identity]		\n\t"
-		"lsr  r24, r24, 8		\n\t"
-		"bmsk r24, r24, 7		\n\t"
-		"add2 r24, @_current_task, r24	\n\t"
-		"st   %2,  [r24]		\n\t"
-#endif
-#ifdef CONFIG_ARC_CURR_IN_REG
-		"mov r25, %2   \n\t"
-#endif
-
-		/* get ksp of incoming task from tsk->thread.ksp */
-		"ld.as  sp, [%2, %1]   \n\t"
-
-		/* start loading it's CALLEE reg file */
-
-#ifndef CONFIG_ARC_CURR_IN_REG
-		"ld.ab   r25, [sp, 4]   \n\t"
-#else
-		"add    sp, sp, 4       \n\t"
-#endif
-		"ld.ab   r24, [sp, 4]   \n\t"
-		"ld.ab   r23, [sp, 4]   \n\t"
-		"ld.ab   r22, [sp, 4]   \n\t"
-		"ld.ab   r21, [sp, 4]   \n\t"
-		"ld.ab   r20, [sp, 4]   \n\t"
-		"ld.ab   r19, [sp, 4]   \n\t"
-		"ld.ab   r18, [sp, 4]   \n\t"
-		"ld.ab   r17, [sp, 4]   \n\t"
-		"ld.ab   r16, [sp, 4]   \n\t"
-		"ld.ab   r15, [sp, 4]   \n\t"
-		"ld.ab   r14, [sp, 4]   \n\t"
-		"ld.ab   r13, [sp, 4]   \n\t"
-
-		/* last (ret value) = prev : although for ARC it mov r0, r0 */
-		"mov     %0, %3        \n\t"
-
-		/* FP/BLINK restore generated by gcc (standard func epilogue */
-
-		: "=r"(tmp)
-		: "n"(KSP_WORD_OFF), "r"(next), "r"(prev)
-		: "blink"
-	);
-
-	return (struct task_struct *)tmp;
-}
diff --git a/arch/arc/kernel/ctx_sw_asm.S b/arch/arc/kernel/ctx_sw_asm.S
index 02c461484761..48e1f21976ed 100644
--- a/arch/arc/kernel/ctx_sw_asm.S
+++ b/arch/arc/kernel/ctx_sw_asm.S
@@ -11,50 +11,54 @@
 #include <asm/entry.h>       /* For the SAVE_* macros */
 #include <asm/asm-offsets.h>
 
-#define KSP_WORD_OFF 	((TASK_THREAD + THREAD_KSP) / 4)
-
-;################### Low Level Context Switch ##########################
+; IN
+;  - r0: prev task (also current)
+;  - r1: next task
+; OUT
+;  - r0: prev task (so r0 not touched)
 
 	.section .sched.text,"ax",@progbits
-	.align 4
-	.global __switch_to
-	.type   __switch_to, @function
-__switch_to:
-	CFI_STARTPROC
-
-	/* Save regs on kernel mode stack of task */
-	st.a    blink, [sp, -4]
-	st.a    fp, [sp, -4]
-	SAVE_CALLEE_SAVED_KERNEL
+ENTRY_CFI(__switch_to)
 
-	/* Save the now KSP in task->thread.ksp */
-#if KSP_WORD_OFF  <= 255
-	st.as  sp, [r0, KSP_WORD_OFF]
-#else
-	/* Workaround for NR_CPUS=4k as ST.as can only take s9 offset */
-	add2	r24, r0, KSP_WORD_OFF
-	st	sp, [r24]
-#endif
-	/*
-	* Return last task in r0 (return reg)
-	* On ARC, Return reg = First Arg reg = r0.
-	* Since we already have last task in r0,
-	* don't need to do anything special to return it
-	*/
+	/* save kernel stack frame regs of @prev task */
+	push	blink
+	CFI_DEF_CFA_OFFSET 4
+	CFI_OFFSET r31, -4
+
+	push	fp
+	CFI_DEF_CFA_OFFSET 8
+	CFI_OFFSET r27, -8
+
+	mov	fp, sp
+	CFI_DEF_CFA_REGISTER r27
+
+	/* kernel mode callee regs of @prev */
+	SAVE_CALLEE_SAVED_KERNEL
 
 	/*
-	 * switch to new task, contained in r1
-	 * Temp reg r3 is required to get the ptr to store val
+	 * save final SP to @prev->thread_info.ksp
+	 * @prev is "current" so thread_info derived from SP
 	 */
-	SET_CURR_TASK_ON_CPU  r1, r3
+	GET_CURR_THR_INFO_FROM_SP  r10
+	st	sp,  [r10, THREAD_INFO_KSP]
+
+	/* update @next in _current_task[] and GP register caching it */
+	SET_CURR_TASK_ON_CPU  r1, r10
 
-	/* reload SP with kernel mode stack pointer in task->thread.ksp */
-	ld.as  sp, [r1, (TASK_THREAD + THREAD_KSP)/4]
+	/* load SP from @next->thread_info.ksp */
+	ld	r10, [r1, TASK_THREAD_INFO]
+	ld	sp,  [r10, THREAD_INFO_KSP]
 
-	/* restore the registers */
+	/* restore callee regs, stack frame regs of @next */
 	RESTORE_CALLEE_SAVED_KERNEL
-	ld.ab   fp, [sp, 4]
-	ld.ab   blink, [sp, 4]
-	j       [blink]
 
+	pop	fp
+	CFI_RESTORE r27
+	CFI_DEF_CFA r28, 4
+
+	pop	blink
+	CFI_RESTORE r31
+	CFI_DEF_CFA_OFFSET 0
+
+	j      [blink]
 END_CFI(__switch_to)
diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c
index 721d465f1580..cc6ac7d128aa 100644
--- a/arch/arc/kernel/devtree.c
+++ b/arch/arc/kernel/devtree.c
@@ -12,6 +12,7 @@
 #include <linux/of.h>
 #include <linux/of_fdt.h>
 #include <asm/mach_desc.h>
+#include <asm/serial.h>
 
 #ifdef CONFIG_SERIAL_EARLYCON
 
@@ -61,7 +62,7 @@ const struct machine_desc * __init setup_machine_fdt(void *dt)
 	const struct machine_desc *mdesc;
 	unsigned long dt_root;
 
-	if (!early_init_dt_scan(dt))
+	if (!early_init_dt_scan(dt, __pa(dt)))
 		return NULL;
 
 	mdesc = of_flat_dt_match_machine(NULL, arch_get_next_mach);
diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S
index a7e6a2174187..e238b5fd3c8c 100644
--- a/arch/arc/kernel/entry-arcv2.S
+++ b/arch/arc/kernel/entry-arcv2.S
@@ -5,7 +5,7 @@
  * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
  */
 
-#include <linux/linkage.h>   /* ARC_{EXTRY,EXIT} */
+#include <linux/linkage.h>   /* ARC_{ENTRY,EXIT} */
 #include <asm/entry.h>       /* SAVE_ALL_{INT1,INT2,TRAP...} */
 #include <asm/errno.h>
 #include <asm/arcregs.h>
@@ -31,7 +31,7 @@ VECTOR	res_service		; Reset Vector
 VECTOR	mem_service		; Mem exception
 VECTOR	instr_service		; Instrn Error
 VECTOR	EV_MachineCheck		; Fatal Machine check
-VECTOR	EV_TLBMissI		; Intruction TLB miss
+VECTOR	EV_TLBMissI		; Instruction TLB miss
 VECTOR	EV_TLBMissD		; Data TLB miss
 VECTOR	EV_TLBProtV		; Protection Violation
 VECTOR	EV_PrivilegeV		; Privilege Violation
@@ -76,11 +76,11 @@ ENTRY(handle_interrupt)
 	# query in hard ISR path would return false (since .IE is set) which would
 	# trips genirq interrupt handling asserts.
 	#
-	# So do a "soft" disable of interrutps here.
+	# So do a "soft" disable of interrupts here.
 	#
 	# Note this disable is only for consistent book-keeping as further interrupts
 	# will be disabled anyways even w/o this. Hardware tracks active interrupts
-	# seperately in AUX_IRQ_ACT.active and will not take new interrupts
+	# separately in AUX_IRQ_ACT.active and will not take new interrupts
 	# unless this one returns (or higher prio becomes pending in 2-prio scheme)
 
 	IRQ_DISABLE
@@ -125,11 +125,6 @@ ENTRY(mem_service)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r0, [efa]
-	mov r1, sp
-
-	FAKE_RET_FROM_EXCPN
-
 	bl  do_memory_error
 	b   ret_from_exception
 END(mem_service)
@@ -138,11 +133,6 @@ ENTRY(EV_Misaligned)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r0, [efa]	; Faulting Data address
-	mov r1, sp
-
-	FAKE_RET_FROM_EXCPN
-
 	SAVE_CALLEE_SAVED_USER
 	mov r2, sp              ; callee_regs
 
@@ -163,11 +153,6 @@ ENTRY(EV_TLBProtV)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r0, [efa]	; Faulting Data address
-	mov r1, sp	; pt_regs
-
-	FAKE_RET_FROM_EXCPN
-
 	mov blink, ret_from_exception
 	b   do_page_fault
 
diff --git a/arch/arc/kernel/entry-compact.S b/arch/arc/kernel/entry-compact.S
index 5cb0cd7e4eab..774c03cc1d1a 100644
--- a/arch/arc/kernel/entry-compact.S
+++ b/arch/arc/kernel/entry-compact.S
@@ -254,18 +254,7 @@ END(handle_interrupt_level1)
 
 ENTRY(EV_TLBProtV)
 
-	EXCEPTION_PROLOGUE
-
-	mov r2, r10	; ECR set into r10 already
-	lr  r0, [efa]	; Faulting Data address (not part of pt_regs saved above)
-
-	; Exception auto-disables further Intr/exceptions.
-	; Re-enable them by pretending to return from exception
-	; (so rest of handler executes in pure K mode)
-
-	FAKE_RET_FROM_EXCPN
-
-	mov   r1, sp	; Handle to pt_regs
+	EXCEPTION_PROLOGUE	; ECR returned in r10
 
 	;------ (5) Type of Protection Violation? ----------
 	;
@@ -273,8 +262,7 @@ ENTRY(EV_TLBProtV)
 	;   -Access Violation	: 00_23_(00|01|02|03)_00
 	;			         x  r  w  r+w
 	;   -Unaligned Access	: 00_23_04_00
-	;
-	bbit1 r2, ECR_C_BIT_PROTV_MISALIG_DATA, 4f
+	bbit1 r10, ECR_C_BIT_PROTV_MISALIG_DATA, 4f
 
 	;========= (6a) Access Violation Processing ========
 	bl  do_page_fault
@@ -303,9 +291,6 @@ END(EV_TLBProtV)
 ENTRY(call_do_page_fault)
 
 	EXCEPTION_PROLOGUE
-	lr  r0, [efa]	; Faulting Data address
-	mov   r1, sp
-	FAKE_RET_FROM_EXCPN
 
 	mov blink, ret_from_exception
 	b  do_page_fault
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
index 54e91df678dd..3c7e74aba679 100644
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -80,11 +80,6 @@ ENTRY(instr_service)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r0, [efa]
-	mov r1, sp
-
-	FAKE_RET_FROM_EXCPN
-
 	bl  do_insterror_or_kprobe
 	b   ret_from_exception
 END(instr_service)
@@ -95,16 +90,15 @@ END(instr_service)
 
 ENTRY(EV_MachineCheck)
 
-	EXCEPTION_PROLOGUE
+	EXCEPTION_PROLOGUE_KEEP_AE	; ECR returned in r10
 
-	lr  r2, [ecr]
 	lr  r0, [efa]
 	mov r1, sp
 
-	; MC excpetions disable MMU
+	; MC exceptions disable MMU
 	ARC_MMU_REENABLE r3
 
-	lsr  	r3, r2, 8
+	lsr  	r3, r10, 8
 	bmsk 	r3, r3, 7
 	brne    r3, ECR_C_MCHK_DUP_TLB, 1f
 
@@ -129,11 +123,6 @@ ENTRY(EV_PrivilegeV)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r0, [efa]
-	mov r1, sp
-
-	FAKE_RET_FROM_EXCPN
-
 	bl  do_privilege_fault
 	b   ret_from_exception
 END(EV_PrivilegeV)
@@ -145,11 +134,6 @@ ENTRY(EV_Extension)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r0, [efa]
-	mov r1, sp
-
-	FAKE_RET_FROM_EXCPN
-
 	bl  do_extension_fault
 	b   ret_from_exception
 END(EV_Extension)
@@ -160,20 +144,19 @@ END(EV_Extension)
 ; syscall Tracing
 ; ---------------------------------------------
 tracesys:
-	; save EFA in case tracer wants the PC of traced task
-	; using ERET won't work since next-PC has already committed
+	; safekeep EFA (r12) if syscall tracer wanted PC
+	; for traps, ERET is pre-commit so points to next-PC
 	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r11
 	st  r12, [r11, THREAD_FAULT_ADDR]	; thread.fault_address
 
-	; PRE Sys Call Ptrace hook
-	mov r0, sp			; pt_regs needed
-	bl  @syscall_trace_entry
+	; PRE syscall trace hook
+	mov r0, sp				; pt_regs
+	bl  @syscall_trace_enter
 
 	; Tracing code now returns the syscall num (orig or modif)
 	mov r8, r0
 
 	; Do the Sys Call as we normally would.
-	; Validate the Sys Call number
 	cmp     r8,  NR_syscalls - 1
 	mov.hi  r0, -ENOSYS
 	bhi     tracesys_exit
@@ -190,79 +173,74 @@ tracesys:
 	ld  r6, [sp, PT_r6]
 	ld  r7, [sp, PT_r7]
 	ld.as   r9, [sys_call_table, r8]
-	jl      [r9]        ; Entry into Sys Call Handler
+	jl      [r9]
 
 tracesys_exit:
-	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
+	st  r0, [sp, PT_r0]
 
-	;POST Sys Call Ptrace Hook
+	; POST syscall trace hook
 	mov r0, sp		; pt_regs needed
 	bl  @syscall_trace_exit
-	b   ret_from_exception ; NOT ret_from_system_call at is saves r0 which
-	; we'd done before calling post hook above
+
+	; don't call ret_from_system_call as it saves r0, already done above
+	b   ret_from_exception
 
 ; ---------------------------------------------
 ; Breakpoint TRAP
 ; ---------------------------------------------
 trap_with_param:
 	mov r0, r12	; EFA in case ptracer/gdb wants stop_pc
-	mov r1, sp
+	mov r1, sp	; pt_regs
 
-	; Save callee regs in case gdb wants to have a look
-	; SP will grow up by size of CALLEE Reg-File
-	; NOTE: clobbers r12
+	; save callee regs in case tracer/gdb wants to peek
 	SAVE_CALLEE_SAVED_USER
 
-	; save location of saved Callee Regs @ thread_struct->pc
+	; safekeep ref to callee regs
 	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r10
 	st  sp, [r10, THREAD_CALLEE_REG]
 
-	; Call the trap handler
+	; call the non syscall trap handler
 	bl  do_non_swi_trap
 
-	; unwind stack to discard Callee saved Regs
+	; unwind stack to discard callee regs
 	DISCARD_CALLEE_SAVED_USER
 
 	b   ret_from_exception
 
 ; ---------------------------------------------
 ; syscall TRAP
-; ABI: (r0-r7) upto 8 args, (r8) syscall number
+; ABI: (r0-r7) up to 8 args, (r8) syscall number
 ; ---------------------------------------------
 
 ENTRY(EV_Trap)
 
-	EXCEPTION_PROLOGUE
+	EXCEPTION_PROLOGUE_KEEP_AE
 
 	lr  r12, [efa]
 
 	FAKE_RET_FROM_EXCPN
 
-	;============ TRAP 1   :breakpoints
-	; Check ECR for trap with arg (PROLOGUE ensures r10 has ECR)
+	;============ TRAP N : breakpoints, kprobes etc
 	bmsk.f 0, r10, 7
 	bnz    trap_with_param
 
-	;============ TRAP  (no param): syscall top level
+	;============ TRAP 0 (no param): syscall
 
-	; If syscall tracing ongoing, invoke pre-post-hooks
+	; syscall tracing ongoing, invoke pre-post-hooks around syscall
 	GET_CURR_THR_INFO_FLAGS   r10
 	and.f 0, r10, _TIF_SYSCALL_WORK
 	bnz   tracesys  ; this never comes back
 
 	;============ Normal syscall case
 
-	; syscall num shd not exceed the total system calls avail
 	cmp     r8,  NR_syscalls - 1
 	mov.hi  r0, -ENOSYS
 	bhi     .Lret_from_system_call
 
-	; Offset into the syscall_table and call handler
 	ld.as   r9,[sys_call_table, r8]
-	jl      [r9]        ; Entry into Sys Call Handler
+	jl      [r9]
 
 .Lret_from_system_call:
-
 	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
 
 	; fall through to ret_from_exception
@@ -318,7 +296,7 @@ resume_user_mode_begin:
 	;      tracer might call PEEKUSR(CALLEE reg)
 	;
 	; NOTE: SP will grow up by size of CALLEE Reg-File
-	SAVE_CALLEE_SAVED_USER		; clobbers r12
+	SAVE_CALLEE_SAVED_USER
 
 	; save location of saved Callee Regs @ thread_struct->callee
 	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r10
diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S
index 9152782444b5..8d541f53fae3 100644
--- a/arch/arc/kernel/head.S
+++ b/arch/arc/kernel/head.S
@@ -165,7 +165,7 @@ ENTRY(first_lines_of_secondary)
 	; setup stack (fp, sp)
 	mov	fp, 0
 
-	; set it's stack base to tsk->thread_info bottom
+	; set its stack base to tsk->thread_info bottom
 	GET_TSK_STACK_BASE r0, sp
 
 	j	start_kernel_secondary
diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c
index 5cda19d0aa91..809edc59af25 100644
--- a/arch/arc/kernel/intc-arcv2.c
+++ b/arch/arc/kernel/intc-arcv2.c
@@ -56,7 +56,7 @@ void arc_init_IRQ(void)
 	WRITE_AUX(AUX_IRQ_CTRL, ictrl);
 
 	/*
-	 * ARCv2 core intc provides multiple interrupt priorities (upto 16).
+	 * ARCv2 core intc provides multiple interrupt priorities (up to 16).
 	 * Typical builds though have only two levels (0-high, 1-low)
 	 * Linux by default uses lower prio 1 for most irqs, reserving 0 for
 	 * NMI style interrupts in future (say perf)
@@ -108,7 +108,7 @@ static void arcv2_irq_unmask(struct irq_data *data)
 	write_aux_reg(AUX_IRQ_ENABLE, 1);
 }
 
-void arcv2_irq_enable(struct irq_data *data)
+static void arcv2_irq_enable(struct irq_data *data)
 {
 	/* set default priority */
 	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
@@ -170,7 +170,7 @@ init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 	if (parent)
 		panic("DeviceTree incore intc not a root irq controller\n");
 
-	root_domain = irq_domain_add_linear(intc, nr_cpu_irqs, &arcv2_irq_ops, NULL);
+	root_domain = irq_domain_create_linear(of_fwnode_handle(intc), nr_cpu_irqs, &arcv2_irq_ops, NULL);
 	if (!root_domain)
 		panic("root irq domain not avail\n");
 
@@ -178,7 +178,7 @@ init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 	 * Needed for primary domain lookup to succeed
 	 * This is a primary irqchip, and can never have a parent
 	 */
-	irq_set_default_host(root_domain);
+	irq_set_default_domain(root_domain);
 
 #ifdef CONFIG_SMP
 	irq_create_mapping(root_domain, IPI_IRQ);
diff --git a/arch/arc/kernel/intc-compact.c b/arch/arc/kernel/intc-compact.c
index 6885e422870e..1b159e9e0234 100644
--- a/arch/arc/kernel/intc-compact.c
+++ b/arch/arc/kernel/intc-compact.c
@@ -112,8 +112,9 @@ init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 	if (parent)
 		panic("DeviceTree incore intc not a root irq controller\n");
 
-	root_domain = irq_domain_add_linear(intc, NR_CPU_IRQS,
-					    &arc_intc_domain_ops, NULL);
+	root_domain = irq_domain_create_linear(of_fwnode_handle(intc),
+					       NR_CPU_IRQS,
+					       &arc_intc_domain_ops, NULL);
 	if (!root_domain)
 		panic("root irq domain not avail\n");
 
@@ -121,7 +122,7 @@ init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 	 * Needed for primary domain lookup to succeed
 	 * This is a primary irqchip, and can never have a parent
 	 */
-	irq_set_default_host(root_domain);
+	irq_set_default_domain(root_domain);
 
 	return 0;
 }
diff --git a/arch/arc/kernel/kgdb.c b/arch/arc/kernel/kgdb.c
index 345a0000554c..4f2b5951454f 100644
--- a/arch/arc/kernel/kgdb.c
+++ b/arch/arc/kernel/kgdb.c
@@ -175,7 +175,7 @@ void kgdb_trap(struct pt_regs *regs)
 	 * with trap_s 4 (compiled) breakpoints, continuation needs to
 	 * start after the breakpoint.
 	 */
-	if (regs->ecr_param == 3)
+	if (regs->ecr.param == 3)
 		instruction_pointer(regs) -= BREAK_INSTR_SIZE;
 
 	kgdb_handle_exception(1, SIGTRAP, 0, regs);
diff --git a/arch/arc/kernel/kprobes.c b/arch/arc/kernel/kprobes.c
index e71d64119d71..f8e2960832d9 100644
--- a/arch/arc/kernel/kprobes.c
+++ b/arch/arc/kernel/kprobes.c
@@ -190,7 +190,8 @@ static void __kprobes setup_singlestep(struct kprobe *p, struct pt_regs *regs)
 	}
 }
 
-int __kprobes arc_kprobe_handler(unsigned long addr, struct pt_regs *regs)
+static int
+__kprobes arc_kprobe_handler(unsigned long addr, struct pt_regs *regs)
 {
 	struct kprobe *p;
 	struct kprobe_ctlblk *kcb;
@@ -241,8 +242,8 @@ int __kprobes arc_kprobe_handler(unsigned long addr, struct pt_regs *regs)
 	return 0;
 }
 
-static int __kprobes arc_post_kprobe_handler(unsigned long addr,
-					 struct pt_regs *regs)
+static int
+__kprobes arc_post_kprobe_handler(unsigned long addr, struct pt_regs *regs)
 {
 	struct kprobe *cur = kprobe_running();
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c
index f9fdb557c263..02b28a9324f4 100644
--- a/arch/arc/kernel/mcip.c
+++ b/arch/arc/kernel/mcip.c
@@ -165,8 +165,6 @@ static void mcip_probe_n_setup(void)
 		IS_AVAIL1(mp.idu, "IDU "),
 		IS_AVAIL1(mp.dbg, "DEBUG "),
 		IS_AVAIL1(mp.gfrc, "GFRC"));
-
-	cpuinfo_arc700[0].extn.gfrc = mp.gfrc;
 }
 
 struct plat_smp_ops plat_smp_ops = {
@@ -359,8 +357,6 @@ static void idu_cascade_isr(struct irq_desc *desc)
 static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq)
 {
 	irq_set_chip_and_handler(virq, &idu_irq_chip, handle_level_irq);
-	irq_set_status_flags(virq, IRQ_MOVE_PCNTXT);
-
 	return 0;
 }
 
@@ -395,7 +391,8 @@ idu_of_init(struct device_node *intc, struct device_node *parent)
 
 	pr_info("MCIP: IDU supports %u common irqs\n", nr_irqs);
 
-	domain = irq_domain_add_linear(intc, nr_irqs, &idu_irq_ops, NULL);
+	domain = irq_domain_create_linear(of_fwnode_handle(intc), nr_irqs,
+					  &idu_irq_ops, NULL);
 
 	/* Parent interrupts (core-intc) are already mapped */
 
diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c
index adff957962da..ed6d4f0cd621 100644
--- a/arch/arc/kernel/perf_event.c
+++ b/arch/arc/kernel/perf_event.c
@@ -38,7 +38,7 @@
  * (based on a specific RTL build)
  * Below is the static map between perf generic/arc specific event_id and
  * h/w condition names.
- * At the time of probe, we loop thru each index and find it's name to
+ * At the time of probe, we loop thru each index and find its name to
  * complete the mapping of perf event_id to h/w index as latter is needed
  * to program the counter really
  */
@@ -599,10 +599,8 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev)
 
 		arc_perf_event_update(event, &event->hw, event->hw.idx);
 		perf_sample_data_init(&data, 0, hwc->last_period);
-		if (arc_pmu_event_set_period(event)) {
-			if (perf_event_overflow(event, &data, regs))
-				arc_pmu_stop(event, 0);
-		}
+		if (arc_pmu_event_set_period(event))
+			perf_event_overflow(event, &data, regs);
 
 		active_ints &= ~BIT(idx);
 	} while (active_ints);
diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c
index 3369f0700702..8166d0908713 100644
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -114,6 +114,8 @@ void arch_cpu_idle(void)
 		"sleep %0	\n"
 		:
 		:"I"(arg)); /* can't be "r" has to be embedded const */
+
+	raw_local_irq_disable();
 }
 
 #else	/* ARC700 */
@@ -122,6 +124,7 @@ void arch_cpu_idle(void)
 {
 	/* sleep, but enable both set E1/E2 (levels of interrupts) before committing */
 	__asm__ __volatile__("sleep 0x3	\n");
+	raw_local_irq_disable();
 }
 
 #endif
@@ -138,7 +141,7 @@ asmlinkage void ret_from_fork(void);
  * |    unused      |
  * |                |
  * ------------------
- * |     r25        |   <==== top of Stack (thread.ksp)
+ * |     r25        |   <==== top of Stack (thread_info.ksp)
  * ~                ~
  * |    --to--      |   (CALLEE Regs of kernel mode)
  * |     r13        |
@@ -159,12 +162,11 @@ asmlinkage void ret_from_fork(void);
  * |      SP        |
  * |    orig_r0     |
  * |    event/ECR   |
- * |    user_r25    |
  * ------------------  <===== END of PAGE
  */
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct pt_regs *c_regs;        /* child's pt_regs */
@@ -179,14 +181,14 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 	c_callee = ((struct callee_regs *)childksp) - 1;
 
 	/*
-	 * __switch_to() uses thread.ksp to start unwinding stack
+	 * __switch_to() uses thread_info.ksp to start unwinding stack
 	 * For kernel threads we don't need to create callee regs, the
 	 * stack layout nevertheless needs to remain the same.
 	 * Also, since __switch_to anyways unwinds callee regs, we use
 	 * this to populate kernel thread entry-pt/args into callee regs,
 	 * so that ret_from_kernel_thread() becomes simpler.
 	 */
-	p->thread.ksp = (unsigned long)c_callee;	/* THREAD_KSP */
+	task_thread_info(p)->ksp = (unsigned long)c_callee;	/* THREAD_INFO_KSP */
 
 	/* __switch_to expects FP(0), BLINK(return addr) at top */
 	childksp[0] = 0;			/* fp */
@@ -240,16 +242,6 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 	 */
 	c_callee->r25 = task_thread_info(p)->thr_ptr;
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	/*
-	 * setup usermode thread pointer #2:
-	 * however for this special use of r25 in kernel, __switch_to() sets
-	 * r25 for kernel needs and only in the final return path is usermode
-	 * r25 setup, from pt_regs->user_r25. So set that up as well
-	 */
-	c_regs->user_r25 = c_callee->r25;
-#endif
-
 	return 0;
 }
 
diff --git a/arch/arc/kernel/ptrace.c b/arch/arc/kernel/ptrace.c
index da7542cea0d8..cad5367b7c37 100644
--- a/arch/arc/kernel/ptrace.c
+++ b/arch/arc/kernel/ptrace.c
@@ -46,8 +46,7 @@ static const struct pt_regs_offset regoffset_table[] = {
 	REG_OFFSET_NAME(r0),
 	REG_OFFSET_NAME(sp),
 	REG_OFFSET_NAME(orig_r0),
-	REG_OFFSET_NAME(event),
-	REG_OFFSET_NAME(user_r25),
+	REG_OFFSET_NAME(ecr),
 	REG_OFFSET_END,
 };
 
@@ -55,9 +54,8 @@ static const struct pt_regs_offset regoffset_table[] = {
 
 static const struct pt_regs_offset regoffset_table[] = {
 	REG_OFFSET_NAME(orig_r0),
-	REG_OFFSET_NAME(event),
+	REG_OFFSET_NAME(ecr),
 	REG_OFFSET_NAME(bta),
-	REG_OFFSET_NAME(user_r25),
 	REG_OFFSET_NAME(r26),
 	REG_OFFSET_NAME(fp),
 	REG_OFFSET_NAME(sp),
@@ -185,7 +183,7 @@ static int genregs_set(struct task_struct *target,
 
 #define REG_IGNORE_ONE(LOC)		\
 	if (!ret)			\
-		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, \
+		user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, \
 			offsetof(struct user_regs_struct, LOC), \
 			offsetof(struct user_regs_struct, LOC) + 4);
 
@@ -286,7 +284,7 @@ enum arc_getset {
 
 static const struct user_regset arc_regsets[] = {
 	[REGSET_CMN] = {
-	       .core_note_type = NT_PRSTATUS,
+	       USER_REGSET_NOTE_TYPE(PRSTATUS),
 	       .n = ELF_NGREG,
 	       .size = sizeof(unsigned long),
 	       .align = sizeof(unsigned long),
@@ -295,7 +293,7 @@ static const struct user_regset arc_regsets[] = {
 	},
 #ifdef CONFIG_ISA_ARCV2
 	[REGSET_ARCV2] = {
-	       .core_note_type = NT_ARC_V2,
+	       USER_REGSET_NOTE_TYPE(ARC_V2),
 	       .n = ELF_ARCV2REG,
 	       .size = sizeof(unsigned long),
 	       .align = sizeof(unsigned long),
@@ -341,7 +339,7 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }
 
-asmlinkage int syscall_trace_entry(struct pt_regs *regs)
+asmlinkage int syscall_trace_enter(struct pt_regs *regs)
 {
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		if (ptrace_report_syscall_entry(regs))
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 41f07b3e594e..7b6a9beba9db 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -29,6 +29,7 @@
 #include <asm/mach_desc.h>
 #include <asm/smp.h>
 #include <asm/dsp-impl.h>
+#include <soc/arc/mcip.h>
 
 #define FIX_PTR(x)  __asm__ __volatile__(";" : "+r"(x))
 
@@ -43,19 +44,22 @@ const struct machine_desc *machine_desc;
 
 struct task_struct *_current_task[NR_CPUS];	/* For stack switching */
 
-struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
+struct cpuinfo_arc {
+	int arcver;
+	unsigned int t0:1, t1:1;
+	struct {
+		unsigned long base;
+		unsigned int sz;
+	} iccm, dccm;
+};
+
+#ifdef CONFIG_ISA_ARCV2
 
-static const struct id_to_str arc_legacy_rel[] = {
+static const struct id_to_str arc_hs_rel[] = {
 	/* ID.ARCVER,	Release */
-#ifdef CONFIG_ISA_ARCOMPACT
-	{ 0x34, 	"R4.10"},
-	{ 0x35, 	"R4.11"},
-#else
 	{ 0x51, 	"R2.0" },
 	{ 0x52, 	"R2.1" },
 	{ 0x53,		"R3.0" },
-#endif
-	{ 0x00,		NULL   }
 };
 
 static const struct id_to_str arc_hs_ver54_rel[] = {
@@ -66,323 +70,294 @@ static const struct id_to_str arc_hs_ver54_rel[] = {
 	{  3,		"R4.00a"},
 	{  0xFF,	NULL   }
 };
+#endif
 
-static void read_decode_ccm_bcr(struct cpuinfo_arc *cpu)
+static int
+arcompact_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len)
 {
-	if (is_isa_arcompact()) {
-		struct bcr_iccm_arcompact iccm;
-		struct bcr_dccm_arcompact dccm;
+	int n = 0;
+#ifdef CONFIG_ISA_ARCOMPACT
+	char *cpu_nm, *isa_nm = "ARCompact";
+	struct bcr_fp_arcompact fpu_sp, fpu_dp;
+	int atomic = 0, be, present;
+	int bpu_full, bpu_cache, bpu_pred;
+	struct bcr_bpu_arcompact bpu;
+	struct bcr_iccm_arcompact iccm;
+	struct bcr_dccm_arcompact dccm;
+	struct bcr_generic isa;
 
-		READ_BCR(ARC_REG_ICCM_BUILD, iccm);
-		if (iccm.ver) {
-			cpu->iccm.sz = 4096 << iccm.sz;	/* 8K to 512K */
-			cpu->iccm.base_addr = iccm.base << 16;
-		}
+	READ_BCR(ARC_REG_ISA_CFG_BCR, isa);
 
-		READ_BCR(ARC_REG_DCCM_BUILD, dccm);
-		if (dccm.ver) {
-			unsigned long base;
-			cpu->dccm.sz = 2048 << dccm.sz;	/* 2K to 256K */
+	if (!isa.ver)	/* ISA BCR absent, use Kconfig info */
+		atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC);
+	else {
+		/* ARC700_BUILD only has 2 bits of isa info */
+		atomic = isa.info & 1;
+	}
 
-			base = read_aux_reg(ARC_REG_DCCM_BASE_BUILD);
-			cpu->dccm.base_addr = base & ~0xF;
-		}
-	} else {
-		struct bcr_iccm_arcv2 iccm;
-		struct bcr_dccm_arcv2 dccm;
-		unsigned long region;
-
-		READ_BCR(ARC_REG_ICCM_BUILD, iccm);
-		if (iccm.ver) {
-			cpu->iccm.sz = 256 << iccm.sz00;	/* 512B to 16M */
-			if (iccm.sz00 == 0xF && iccm.sz01 > 0)
-				cpu->iccm.sz <<= iccm.sz01;
-
-			region = read_aux_reg(ARC_REG_AUX_ICCM);
-			cpu->iccm.base_addr = region & 0xF0000000;
-		}
+	be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN);
 
-		READ_BCR(ARC_REG_DCCM_BUILD, dccm);
-		if (dccm.ver) {
-			cpu->dccm.sz = 256 << dccm.sz0;
-			if (dccm.sz0 == 0xF && dccm.sz1 > 0)
-				cpu->dccm.sz <<= dccm.sz1;
+	if (info->arcver < 0x34)
+		cpu_nm = "ARC750";
+	else
+		cpu_nm = "ARC770";
 
-			region = read_aux_reg(ARC_REG_AUX_DCCM);
-			cpu->dccm.base_addr = region & 0xF0000000;
-		}
-	}
-}
+	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s (%s ISA) %s%s%s\n",
+		       c, cpu_nm, isa_nm,
+		       IS_AVAIL2(atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
+		       IS_AVAIL1(be, "[Big-Endian]"));
 
-static void decode_arc_core(struct cpuinfo_arc *cpu)
-{
-	struct bcr_uarch_build_arcv2 uarch;
-	const struct id_to_str *tbl;
-
-	if (cpu->core.family < 0x54) { /* includes arc700 */
+	READ_BCR(ARC_REG_FP_BCR, fpu_sp);
+	READ_BCR(ARC_REG_DPFP_BCR, fpu_dp);
 
-		for (tbl = &arc_legacy_rel[0]; tbl->id != 0; tbl++) {
-			if (cpu->core.family == tbl->id) {
-				cpu->release = tbl->str;
-				break;
-			}
-		}
+	if (fpu_sp.ver | fpu_dp.ver)
+		n += scnprintf(buf + n, len - n, "FPU\t\t: %s%s\n",
+			       IS_AVAIL1(fpu_sp.ver, "SP "),
+			       IS_AVAIL1(fpu_dp.ver, "DP "));
 
-		if (is_isa_arcompact())
-			cpu->name = "ARC700";
-		else if (tbl->str)
-			cpu->name = "HS38";
-		else
-			cpu->name = cpu->release = "Unknown";
+	READ_BCR(ARC_REG_BPU_BCR, bpu);
+	bpu_full = bpu.fam ? 1 : 0;
+	bpu_cache = 256 << (bpu.ent - 1);
+	bpu_pred = 256 << (bpu.ent - 1);
 
-		return;
+	n += scnprintf(buf + n, len - n,
+			"BPU\t\t: %s%s match, cache:%d, Predict Table:%d\n",
+			IS_AVAIL1(bpu_full, "full"),
+			IS_AVAIL1(!bpu_full, "partial"),
+			bpu_cache, bpu_pred);
+
+	READ_BCR(ARC_REG_ICCM_BUILD, iccm);
+	if (iccm.ver) {
+		info->iccm.sz = 4096 << iccm.sz;	/* 8K to 512K */
+		info->iccm.base = iccm.base << 16;
 	}
 
-	/*
-	 * Initial HS cores bumped AUX IDENTITY.ARCVER for each release until
-	 * ARCVER 0x54 which introduced AUX MICRO_ARCH_BUILD and subsequent
-	 * releases only update it.
-	 */
-	READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch);
-
-	if (uarch.prod == 4) {
-		cpu->name = "HS48";
-		cpu->extn.dual = 1;
+	READ_BCR(ARC_REG_DCCM_BUILD, dccm);
+	if (dccm.ver) {
+		unsigned long base;
+		info->dccm.sz = 2048 << dccm.sz;	/* 2K to 256K */
 
-	} else {
-		cpu->name = "HS38";
+		base = read_aux_reg(ARC_REG_DCCM_BASE_BUILD);
+		info->dccm.base = base & ~0xF;
 	}
 
-	for (tbl = &arc_hs_ver54_rel[0]; tbl->id != 0xFF; tbl++) {
-		if (uarch.maj == tbl->id) {
-			cpu->release = tbl->str;
-			break;
-		}
-	}
+	/* ARCompact ISA specific sanity checks */
+	present = fpu_dp.ver;	/* SP has no arch visible regs */
+	CHK_OPT_STRICT(CONFIG_ARC_FPU_SAVE_RESTORE, present);
+#endif
+	return n;
+
 }
 
-static void read_arc_build_cfg_regs(void)
+static int arcv2_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len)
 {
-	struct bcr_timer timer;
-	struct bcr_generic bcr;
-	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
+	int n = 0;
+#ifdef CONFIG_ISA_ARCV2
+	const char *release = "", *cpu_nm = "HS38", *isa_nm = "ARCv2";
+	int dual_issue = 0, dual_enb = 0, mpy_opt, present;
+	int bpu_full, bpu_cache, bpu_pred, bpu_ret_stk;
+	char mpy_nm[16], lpb_nm[32];
 	struct bcr_isa_arcv2 isa;
-	struct bcr_actionpoint ap;
-
-	FIX_PTR(cpu);
+	struct bcr_mpy mpy;
+	struct bcr_fp_arcv2 fpu;
+	struct bcr_bpu_arcv2 bpu;
+	struct bcr_lpb lpb;
+	struct bcr_iccm_arcv2 iccm;
+	struct bcr_dccm_arcv2 dccm;
+	struct bcr_erp erp;
 
-	READ_BCR(AUX_IDENTITY, cpu->core);
-	decode_arc_core(cpu);
-
-	READ_BCR(ARC_REG_TIMERS_BCR, timer);
-	cpu->extn.timer0 = timer.t0;
-	cpu->extn.timer1 = timer.t1;
-	cpu->extn.rtc = timer.rtc;
-
-	cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
-
-	READ_BCR(ARC_REG_MUL_BCR, cpu->extn_mpy);
+	/*
+	 * Initial HS cores bumped AUX IDENTITY.ARCVER for each release until
+	 * ARCVER 0x54 which introduced AUX MICRO_ARCH_BUILD and subsequent
+	 * releases only update it.
+	 */
 
-	/* Read CCM BCRs for boot reporting even if not enabled in Kconfig */
-	read_decode_ccm_bcr(cpu);
+	if (info->arcver > 0x50 && info->arcver <= 0x53) {
+		release = arc_hs_rel[info->arcver - 0x51].str;
+	} else {
+		const struct id_to_str *tbl;
+		struct bcr_uarch_build uarch;
 
-	read_decode_mmu_bcr();
-	read_decode_cache_bcr();
+		READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch);
 
-	if (is_isa_arcompact()) {
-		struct bcr_fp_arcompact sp, dp;
-		struct bcr_bpu_arcompact bpu;
-
-		READ_BCR(ARC_REG_FP_BCR, sp);
-		READ_BCR(ARC_REG_DPFP_BCR, dp);
-		cpu->extn.fpu_sp = sp.ver ? 1 : 0;
-		cpu->extn.fpu_dp = dp.ver ? 1 : 0;
-
-		READ_BCR(ARC_REG_BPU_BCR, bpu);
-		cpu->bpu.ver = bpu.ver;
-		cpu->bpu.full = bpu.fam ? 1 : 0;
-		if (bpu.ent) {
-			cpu->bpu.num_cache = 256 << (bpu.ent - 1);
-			cpu->bpu.num_pred = 256 << (bpu.ent - 1);
+		for (tbl = &arc_hs_ver54_rel[0]; tbl->id != 0xFF; tbl++) {
+			if (uarch.maj == tbl->id) {
+				release = tbl->str;
+				break;
+			}
 		}
-	} else {
-		struct bcr_fp_arcv2 spdp;
-		struct bcr_bpu_arcv2 bpu;
-
-		READ_BCR(ARC_REG_FP_V2_BCR, spdp);
-		cpu->extn.fpu_sp = spdp.sp ? 1 : 0;
-		cpu->extn.fpu_dp = spdp.dp ? 1 : 0;
-
-		READ_BCR(ARC_REG_BPU_BCR, bpu);
-		cpu->bpu.ver = bpu.ver;
-		cpu->bpu.full = bpu.ft;
-		cpu->bpu.num_cache = 256 << bpu.bce;
-		cpu->bpu.num_pred = 2048 << bpu.pte;
-		cpu->bpu.ret_stk = 4 << bpu.rse;
-
-		/* if dual issue hardware, is it enabled ? */
-		if (cpu->extn.dual) {
+		if (uarch.prod == 4) {
 			unsigned int exec_ctrl;
 
+			cpu_nm = "HS48";
+			dual_issue = 1;
+			/* if dual issue hardware, is it enabled ? */
 			READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
-			cpu->extn.dual_enb = !(exec_ctrl & 1);
+			dual_enb = !(exec_ctrl & 1);
 		}
 	}
 
-	READ_BCR(ARC_REG_AP_BCR, ap);
-	if (ap.ver) {
-		cpu->extn.ap_num = 2 << ap.num;
-		cpu->extn.ap_full = !ap.min;
-	}
-
-	READ_BCR(ARC_REG_SMART_BCR, bcr);
-	cpu->extn.smart = bcr.ver ? 1 : 0;
-
-	READ_BCR(ARC_REG_RTT_BCR, bcr);
-	cpu->extn.rtt = bcr.ver ? 1 : 0;
-
 	READ_BCR(ARC_REG_ISA_CFG_BCR, isa);
 
-	/* some hacks for lack of feature BCR info in old ARC700 cores */
-	if (is_isa_arcompact()) {
-		if (!isa.ver)	/* ISA BCR absent, use Kconfig info */
-			cpu->isa.atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC);
-		else {
-			/* ARC700_BUILD only has 2 bits of isa info */
-			struct bcr_generic bcr = *(struct bcr_generic *)&isa;
-			cpu->isa.atomic = bcr.info & 1;
-		}
-
-		cpu->isa.be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN);
+	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s%s%s\n",
+		       c, cpu_nm, release, isa_nm,
+		       IS_AVAIL1(isa.be, "[Big-Endian]"),
+		       IS_AVAIL3(dual_issue, dual_enb, " Dual-Issue "));
+
+	READ_BCR(ARC_REG_MPY_BCR, mpy);
+	mpy_opt = 2;	/* stock MPY/MPYH */
+	if (mpy.dsp)	/* OPT 7-9 */
+		mpy_opt = mpy.dsp + 6;
+
+	scnprintf(mpy_nm, 16, "mpy[opt %d] ", mpy_opt);
+
+	READ_BCR(ARC_REG_FP_V2_BCR, fpu);
+
+	n += scnprintf(buf + n, len - n, "ISA Extn\t: %s%s%s%s%s%s%s%s%s%s%s\n",
+		       IS_AVAIL2(isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
+		       IS_AVAIL2(isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64),
+		       IS_AVAIL2(isa.unalign, "unalign ", CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS),
+		       IS_AVAIL1(mpy.ver, mpy_nm),
+		       IS_AVAIL1(isa.div_rem, "div_rem "),
+		       IS_AVAIL1((fpu.sp | fpu.dp), "  FPU:"),
+		       IS_AVAIL1(fpu.sp, " sp"),
+		       IS_AVAIL1(fpu.dp, " dp"));
+
+	READ_BCR(ARC_REG_BPU_BCR, bpu);
+	bpu_full = bpu.ft;
+	bpu_cache = 256 << bpu.bce;
+	bpu_pred = 2048 << bpu.pte;
+	bpu_ret_stk = 4 << bpu.rse;
+
+	READ_BCR(ARC_REG_LPB_BUILD, lpb);
+	if (lpb.ver) {
+		unsigned int ctl;
+		ctl = read_aux_reg(ARC_REG_LPB_CTRL);
+
+		scnprintf(lpb_nm, sizeof(lpb_nm), " Loop Buffer:%d %s",
+			  lpb.entries, IS_DISABLED_RUN(!ctl));
+	}
 
-		 /* there's no direct way to distinguish 750 vs. 770 */
-		if (unlikely(cpu->core.family < 0x34 || cpu->mmu.ver < 3))
-			cpu->name = "ARC750";
-	} else {
-		cpu->isa = isa;
+	n += scnprintf(buf + n, len - n,
+			"BPU\t\t: %s%s match, cache:%d, Predict Table:%d Return stk: %d%s\n",
+			IS_AVAIL1(bpu_full, "full"),
+			IS_AVAIL1(!bpu_full, "partial"),
+			bpu_cache, bpu_pred, bpu_ret_stk,
+			lpb_nm);
+
+	READ_BCR(ARC_REG_ICCM_BUILD, iccm);
+	if (iccm.ver) {
+		unsigned long base;
+		info->iccm.sz = 256 << iccm.sz00;	/* 512B to 16M */
+		if (iccm.sz00 == 0xF && iccm.sz01 > 0)
+			info->iccm.sz <<= iccm.sz01;
+		base = read_aux_reg(ARC_REG_AUX_ICCM);
+		info->iccm.base = base & 0xF0000000;
 	}
-}
 
-static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
-{
-	struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
-	struct bcr_identity *core = &cpu->core;
-	char mpy_opt[16];
-	int n = 0;
+	READ_BCR(ARC_REG_DCCM_BUILD, dccm);
+	if (dccm.ver) {
+		unsigned long base;
+		info->dccm.sz = 256 << dccm.sz0;
+		if (dccm.sz0 == 0xF && dccm.sz1 > 0)
+			info->dccm.sz <<= dccm.sz1;
+		base = read_aux_reg(ARC_REG_AUX_DCCM);
+		info->dccm.base = base & 0xF0000000;
+	}
 
-	FIX_PTR(cpu);
+	/* Error Protection: ECC/Parity */
+	READ_BCR(ARC_REG_ERP_BUILD, erp);
+	if (erp.ver) {
+		struct ctl_erp ctl;
+		READ_BCR(ARC_REG_ERP_CTRL, ctl);
+		/* inverted bits: 0 means enabled */
+		n += scnprintf(buf + n, len - n, "Extn [ECC]\t: %s%s%s%s%s%s\n",
+				IS_AVAIL3(erp.ic,  !ctl.dpi, "IC "),
+				IS_AVAIL3(erp.dc,  !ctl.dpd, "DC "),
+				IS_AVAIL3(erp.mmu, !ctl.mpd, "MMU "));
+	}
 
-	n += scnprintf(buf + n, len - n,
-		       "\nIDENTITY\t: ARCVER [%#02x] ARCNUM [%#02x] CHIPID [%#4x]\n",
-		       core->family, core->cpu_id, core->chip_id);
+	/* ARCv2 ISA specific sanity checks */
+	present = fpu.sp | fpu.dp | mpy.dsp;	/* DSP and/or FPU */
+	CHK_OPT_STRICT(CONFIG_ARC_HAS_ACCL_REGS, present);
 
-	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s%s%s\n",
-		       cpu_id, cpu->name, cpu->release,
-		       is_isa_arcompact() ? "ARCompact" : "ARCv2",
-		       IS_AVAIL1(cpu->isa.be, "[Big-Endian]"),
-		       IS_AVAIL3(cpu->extn.dual, cpu->extn.dual_enb, " Dual-Issue "));
+	dsp_config_check();
+#endif
+	return n;
+}
 
-	n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s%s%s\nISA Extn\t: ",
-		       IS_AVAIL1(cpu->extn.timer0, "Timer0 "),
-		       IS_AVAIL1(cpu->extn.timer1, "Timer1 "),
-		       IS_AVAIL2(cpu->extn.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
-		       IS_AVAIL2(cpu->extn.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_TIMERS_64BIT));
+static char *arc_cpu_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len)
+{
+	struct bcr_identity ident;
+	struct bcr_timer timer;
+	struct bcr_generic bcr;
+	struct mcip_bcr mp;
+	struct bcr_actionpoint ap;
+	unsigned long vec_base;
+	int ap_num, ap_full, smart, rtt, n;
 
-	if (cpu->extn_mpy.ver) {
-		if (is_isa_arcompact()) {
-			scnprintf(mpy_opt, 16, "mpy");
-		} else {
+	memset(info, 0, sizeof(struct cpuinfo_arc));
 
-			int opt = 2;	/* stock MPY/MPYH */
+	READ_BCR(AUX_IDENTITY, ident);
+	info->arcver = ident.family;
 
-			if (cpu->extn_mpy.dsp)	/* OPT 7-9 */
-				opt = cpu->extn_mpy.dsp + 6;
+	n = scnprintf(buf, len,
+		       "\nIDENTITY\t: ARCVER [%#02x] ARCNUM [%#02x] CHIPID [%#4x]\n",
+		       ident.family, ident.cpu_id, ident.chip_id);
 
-			scnprintf(mpy_opt, 16, "mpy[opt %d] ", opt);
-		}
+	if (is_isa_arcompact()) {
+		n += arcompact_mumbojumbo(c, info, buf + n, len - n);
+	} else if (is_isa_arcv2()){
+		n += arcv2_mumbojumbo(c, info, buf + n, len - n);
 	}
 
-	n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n",
-		       IS_AVAIL2(cpu->isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
-		       IS_AVAIL2(cpu->isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64),
-		       IS_AVAIL2(cpu->isa.unalign, "unalign ", CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS),
-		       IS_AVAIL1(cpu->extn_mpy.ver, mpy_opt),
-		       IS_AVAIL1(cpu->isa.div_rem, "div_rem "));
+	n += arc_mmu_mumbojumbo(c, buf + n, len - n);
+	n += arc_cache_mumbojumbo(c, buf + n, len - n);
 
-	if (cpu->bpu.ver) {
-		n += scnprintf(buf + n, len - n,
-			      "BPU\t\t: %s%s match, cache:%d, Predict Table:%d Return stk: %d",
-			      IS_AVAIL1(cpu->bpu.full, "full"),
-			      IS_AVAIL1(!cpu->bpu.full, "partial"),
-			      cpu->bpu.num_cache, cpu->bpu.num_pred, cpu->bpu.ret_stk);
-
-		if (is_isa_arcv2()) {
-			struct bcr_lpb lpb;
-
-			READ_BCR(ARC_REG_LPB_BUILD, lpb);
-			if (lpb.ver) {
-				unsigned int ctl;
-				ctl = read_aux_reg(ARC_REG_LPB_CTRL);
-
-				n += scnprintf(buf + n, len - n, " Loop Buffer:%d %s",
-					       lpb.entries,
-					       IS_DISABLED_RUN(!ctl));
-			}
-		}
-		n += scnprintf(buf + n, len - n, "\n");
-	}
+	READ_BCR(ARC_REG_TIMERS_BCR, timer);
+	info->t0 = timer.t0;
+	info->t1 = timer.t1;
 
-	return buf;
-}
+	READ_BCR(ARC_REG_MCIP_BCR, mp);
+	vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
 
-static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
-{
-	int n = 0;
-	struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
+	n += scnprintf(buf + n, len - n,
+		       "Timers\t\t: %s%s%s%s%s%s\nVector Table\t: %#lx\n",
+		       IS_AVAIL1(timer.t0, "Timer0 "),
+		       IS_AVAIL1(timer.t1, "Timer1 "),
+		       IS_AVAIL2(timer.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
+		       IS_AVAIL2(mp.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
+		       vec_base);
 
-	FIX_PTR(cpu);
+	READ_BCR(ARC_REG_AP_BCR, ap);
+	if (ap.ver) {
+		ap_num = 2 << ap.num;
+		ap_full = !ap.min;
+	}
 
-	n += scnprintf(buf + n, len - n, "Vector Table\t: %#x\n", cpu->vec_base);
+	READ_BCR(ARC_REG_SMART_BCR, bcr);
+	smart = bcr.ver ? 1 : 0;
 
-	if (cpu->extn.fpu_sp || cpu->extn.fpu_dp)
-		n += scnprintf(buf + n, len - n, "FPU\t\t: %s%s\n",
-			       IS_AVAIL1(cpu->extn.fpu_sp, "SP "),
-			       IS_AVAIL1(cpu->extn.fpu_dp, "DP "));
+	READ_BCR(ARC_REG_RTT_BCR, bcr);
+	rtt = bcr.ver ? 1 : 0;
 
-	if (cpu->extn.ap_num | cpu->extn.smart | cpu->extn.rtt) {
+	if (ap.ver | smart | rtt) {
 		n += scnprintf(buf + n, len - n, "DEBUG\t\t: %s%s",
-			       IS_AVAIL1(cpu->extn.smart, "smaRT "),
-			       IS_AVAIL1(cpu->extn.rtt, "RTT "));
-		if (cpu->extn.ap_num) {
+			       IS_AVAIL1(smart, "smaRT "),
+			       IS_AVAIL1(rtt, "RTT "));
+		if (ap.ver) {
 			n += scnprintf(buf + n, len - n, "ActionPoint %d/%s",
-				       cpu->extn.ap_num,
-				       cpu->extn.ap_full ? "full":"min");
+				       ap_num,
+				       ap_full ? "full":"min");
 		}
 		n += scnprintf(buf + n, len - n, "\n");
 	}
 
-	if (cpu->dccm.sz || cpu->iccm.sz)
-		n += scnprintf(buf + n, len - n, "Extn [CCM]\t: DCCM @ %x, %d KB / ICCM: @ %x, %d KB\n",
-			       cpu->dccm.base_addr, TO_KB(cpu->dccm.sz),
-			       cpu->iccm.base_addr, TO_KB(cpu->iccm.sz));
-
-	if (is_isa_arcv2()) {
-
-		/* Error Protection: ECC/Parity */
-		struct bcr_erp erp;
-		READ_BCR(ARC_REG_ERP_BUILD, erp);
-
-		if (erp.ver) {
-			struct  ctl_erp ctl;
-			READ_BCR(ARC_REG_ERP_CTRL, ctl);
-
-			/* inverted bits: 0 means enabled */
-			n += scnprintf(buf + n, len - n, "Extn [ECC]\t: %s%s%s%s%s%s\n",
-				IS_AVAIL3(erp.ic,  !ctl.dpi, "IC "),
-				IS_AVAIL3(erp.dc,  !ctl.dpd, "DC "),
-				IS_AVAIL3(erp.mmu, !ctl.mpd, "MMU "));
-		}
-	}
+	if (info->dccm.sz || info->iccm.sz)
+		n += scnprintf(buf + n, len - n,
+			       "Extn [CCM]\t: DCCM @ %lx, %d KB / ICCM: @ %lx, %d KB\n",
+			       info->dccm.base, TO_KB(info->dccm.sz),
+			       info->iccm.base, TO_KB(info->iccm.sz));
 
 	return buf;
 }
@@ -401,51 +376,33 @@ void chk_opt_weak(char *opt_name, bool hw_exists, bool opt_ena)
 		panic("Disable %s, hardware NOT present\n", opt_name);
 }
 
-static void arc_chk_core_config(void)
+/*
+ * ISA agnostic sanity checks
+ */
+static void arc_chk_core_config(struct cpuinfo_arc *info)
 {
-	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
-	int present = 0;
-
-	if (!cpu->extn.timer0)
+	if (!info->t0)
 		panic("Timer0 is not present!\n");
 
-	if (!cpu->extn.timer1)
+	if (!info->t1)
 		panic("Timer1 is not present!\n");
 
 #ifdef CONFIG_ARC_HAS_DCCM
 	/*
 	 * DCCM can be arbit placed in hardware.
-	 * Make sure it's placement/sz matches what Linux is built with
+	 * Make sure its placement/sz matches what Linux is built with
 	 */
-	if ((unsigned int)__arc_dccm_base != cpu->dccm.base_addr)
+	if ((unsigned int)__arc_dccm_base != info->dccm.base)
 		panic("Linux built with incorrect DCCM Base address\n");
 
-	if (CONFIG_ARC_DCCM_SZ * SZ_1K != cpu->dccm.sz)
+	if (CONFIG_ARC_DCCM_SZ * SZ_1K != info->dccm.sz)
 		panic("Linux built with incorrect DCCM Size\n");
 #endif
 
 #ifdef CONFIG_ARC_HAS_ICCM
-	if (CONFIG_ARC_ICCM_SZ * SZ_1K != cpu->iccm.sz)
+	if (CONFIG_ARC_ICCM_SZ * SZ_1K != info->iccm.sz)
 		panic("Linux built with incorrect ICCM Size\n");
 #endif
-
-	/*
-	 * FP hardware/software config sanity
-	 * -If hardware present, kernel needs to save/restore FPU state
-	 * -If not, it will crash trying to save/restore the non-existant regs
-	 */
-
-	if (is_isa_arcompact()) {
-		/* only DPDP checked since SP has no arch visible regs */
-		present = cpu->extn.fpu_dp;
-		CHK_OPT_STRICT(CONFIG_ARC_FPU_SAVE_RESTORE, present);
-	} else {
-		/* Accumulator Low:High pair (r58:59) present if DSP MPY or FPU */
-		present = cpu->extn_mpy.dsp | cpu->extn.fpu_sp | cpu->extn.fpu_dp;
-		CHK_OPT_STRICT(CONFIG_ARC_HAS_ACCL_REGS, present);
-
-		dsp_config_check();
-	}
 }
 
 /*
@@ -456,21 +413,19 @@ static void arc_chk_core_config(void)
 
 void setup_processor(void)
 {
+	struct cpuinfo_arc info;
+	int c = smp_processor_id();
 	char str[512];
-	int cpu_id = smp_processor_id();
 
-	read_arc_build_cfg_regs();
-	arc_init_IRQ();
+	pr_info("%s", arc_cpu_mumbojumbo(c, &info, str, sizeof(str)));
+	pr_info("%s", arc_platform_smp_cpuinfo());
 
-	pr_info("%s", arc_cpu_mumbojumbo(cpu_id, str, sizeof(str)));
+	arc_chk_core_config(&info);
 
+	arc_init_IRQ();
 	arc_mmu_init();
 	arc_cache_init();
 
-	pr_info("%s", arc_extn_mumbojumbo(cpu_id, str, sizeof(str)));
-	pr_info("%s", arc_platform_smp_cpuinfo());
-
-	arc_chk_core_config();
 }
 
 static inline bool uboot_arg_invalid(unsigned long addr)
@@ -617,6 +572,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	char *str;
 	int cpu_id = ptr_to_cpu(v);
 	struct device *cpu_dev = get_cpu_device(cpu_id);
+	struct cpuinfo_arc info;
 	struct clk *cpu_clk;
 	unsigned long freq = 0;
 
@@ -629,7 +585,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	if (!str)
 		goto done;
 
-	seq_printf(m, arc_cpu_mumbojumbo(cpu_id, str, PAGE_SIZE));
+	seq_printf(m, arc_cpu_mumbojumbo(cpu_id, &info, str, PAGE_SIZE));
 
 	cpu_clk = clk_get(cpu_dev, NULL);
 	if (IS_ERR(cpu_clk)) {
@@ -646,9 +602,6 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		   loops_per_jiffy / (500000 / HZ),
 		   (loops_per_jiffy / (5000 / HZ)) % 100);
 
-	seq_printf(m, arc_mmu_mumbojumbo(cpu_id, str, PAGE_SIZE));
-	seq_printf(m, arc_cache_mumbojumbo(cpu_id, str, PAGE_SIZE));
-	seq_printf(m, arc_extn_mumbojumbo(cpu_id, str, PAGE_SIZE));
 	seq_printf(m, arc_platform_smp_cpuinfo());
 
 	free_page((unsigned long)str);
diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c
index 3c1590c27fae..fefa705a8638 100644
--- a/arch/arc/kernel/signal.c
+++ b/arch/arc/kernel/signal.c
@@ -8,15 +8,16 @@
  *
  * vineetg: Nov 2009 (Everything needed for TIF_RESTORE_SIGMASK)
  *  -do_signal() supports TIF_RESTORE_SIGMASK
- *  -do_signal() no loner needs oldset, required by OLD sys_sigsuspend
- *  -sys_rt_sigsuspend() now comes from generic code, so discard arch implemen
+ *  -do_signal() no longer needs oldset, required by OLD sys_sigsuspend
+ *  -sys_rt_sigsuspend() now comes from generic code, so discard arch
+ *   implementation
  *  -sys_sigsuspend() no longer needs to fudge ptregs, hence that arg removed
  *  -sys_sigsuspend() no longer loops for do_signal(), sets TIF_xxx and leaves
  *   the job to do_signal()
  *
  * vineetg: July 2009
  *  -Modified Code to support the uClibc provided userland sigreturn stub
- *   to avoid kernel synthesing it on user stack at runtime, costing TLB
+ *   to avoid kernel synthesizing it on user stack at runtime, costing TLB
  *   probes and Cache line flushes.
  *
  * vineetg: July 2009
@@ -53,6 +54,7 @@
 #include <linux/sched/task_stack.h>
 
 #include <asm/ucontext.h>
+#include <asm/entry.h>
 
 struct rt_sigframe {
 	struct siginfo info;
@@ -61,7 +63,7 @@ struct rt_sigframe {
 	unsigned int sigret_magic;
 };
 
-static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+static int save_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs)
 {
 	int err = 0;
 #ifndef CONFIG_ISA_ARCOMPACT
@@ -74,12 +76,12 @@ static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
 #else
 	v2abi.r58 = v2abi.r59 = 0;
 #endif
-	err = __copy_to_user(&mctx->v2abi, &v2abi, sizeof(v2abi));
+	err = __copy_to_user(&mctx->v2abi, (void const *)&v2abi, sizeof(v2abi));
 #endif
 	return err;
 }
 
-static int restore_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+static int restore_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs)
 {
 	int err = 0;
 #ifndef CONFIG_ISA_ARCOMPACT
diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c
index ab9e75e90f72..b2f2c59279a6 100644
--- a/arch/arc/kernel/smp.c
+++ b/arch/arc/kernel/smp.c
@@ -23,9 +23,10 @@
 #include <linux/export.h>
 #include <linux/of_fdt.h>
 
-#include <asm/processor.h>
-#include <asm/setup.h>
 #include <asm/mach_desc.h>
+#include <asm/setup.h>
+#include <asm/smp.h>
+#include <asm/processor.h>
 
 #ifndef CONFIG_ARC_HAS_LLSC
 arch_spinlock_t smp_atomic_ops_lock = __ARCH_SPIN_LOCK_UNLOCKED;
@@ -38,11 +39,6 @@ struct plat_smp_ops  __weak plat_smp_ops;
 /* XXX: per cpu ? Only needed once in early secondary boot */
 struct task_struct *secondary_idle_tsk;
 
-/* Called from start_kernel */
-void __init smp_prepare_boot_cpu(void)
-{
-}
-
 static int __init arc_get_cpu_map(const char *name, struct cpumask *cpumask)
 {
 	unsigned long dt_root = of_get_flat_dt_root();
@@ -292,7 +288,7 @@ static void ipi_send_msg(const struct cpumask *callmap, enum ipi_msg_type msg)
 		ipi_send_msg_one(cpu, msg);
 }
 
-void smp_send_reschedule(int cpu)
+void arch_smp_send_reschedule(int cpu)
 {
 	ipi_send_msg_one(cpu, IPI_RESCHEDULE);
 }
@@ -351,7 +347,7 @@ static inline int __do_IPI(unsigned long msg)
  * arch-common ISR to handle for inter-processor interrupts
  * Has hooks for platform specific IPI
  */
-irqreturn_t do_IPI(int irq, void *dev_id)
+static irqreturn_t do_IPI(int irq, void *dev_id)
 {
 	unsigned long pending;
 	unsigned long __maybe_unused copy;
@@ -385,7 +381,7 @@ irqreturn_t do_IPI(int irq, void *dev_id)
  * API called by platform code to hookup arch-common ISR to their IPI IRQ
  *
  * Note: If IPI is provided by platform (vs. say ARC MCIP), their intc setup/map
- * function needs to call call irq_set_percpu_devid() for IPI IRQ, otherwise
+ * function needs to call irq_set_percpu_devid() for IPI IRQ, otherwise
  * request_percpu_irq() below will fail
  */
 static DEFINE_PER_CPU(int, ipi_dev);
diff --git a/arch/arc/kernel/stacktrace.c b/arch/arc/kernel/stacktrace.c
index 5372dc04e784..ea99c066ef25 100644
--- a/arch/arc/kernel/stacktrace.c
+++ b/arch/arc/kernel/stacktrace.c
@@ -29,6 +29,7 @@
 
 #include <asm/arcregs.h>
 #include <asm/unwind.h>
+#include <asm/stacktrace.h>
 #include <asm/switch_to.h>
 
 /*-------------------------------------------------------------------------
diff --git a/arch/arc/kernel/sys.c b/arch/arc/kernel/sys.c
index 1069446bdc58..36a2a95c083b 100644
--- a/arch/arc/kernel/sys.c
+++ b/arch/arc/kernel/sys.c
@@ -8,11 +8,12 @@
 
 #define sys_clone	sys_clone_wrapper
 #define sys_clone3	sys_clone3_wrapper
+#define sys_mmap2	sys_mmap_pgoff
 
-#undef __SYSCALL
 #define __SYSCALL(nr, call) [nr] = (call),
+#define __SYSCALL_WITH_COMPAT(nr, native, compat)  __SYSCALL(nr, native)
 
 void *sys_call_table[NR_syscalls] = {
 	[0 ... NR_syscalls-1] = sys_ni_syscall,
-#include <asm/unistd.h>
+#include <asm/syscall_table_32.h>
 };
diff --git a/arch/arc/kernel/traps.c b/arch/arc/kernel/traps.c
index 6b83e3f2b41c..8d2ea2cbd98b 100644
--- a/arch/arc/kernel/traps.c
+++ b/arch/arc/kernel/traps.c
@@ -16,9 +16,11 @@
 #include <linux/ptrace.h>
 #include <linux/kprobes.h>
 #include <linux/kgdb.h>
+#include <asm/entry.h>
 #include <asm/setup.h>
-#include <asm/unaligned.h>
+#include <linux/unaligned.h>
 #include <asm/kprobes.h>
+#include "unaligned.h"
 
 void die(const char *str, struct pt_regs *regs, unsigned long address)
 {
@@ -88,7 +90,7 @@ int do_misaligned_access(unsigned long address, struct pt_regs *regs,
 
 /*
  * Entry point for miscll errors such as Nested Exceptions
- *  -Duplicate TLB entry is handled seperately though
+ *  -Duplicate TLB entry is handled separately though
  */
 void do_machine_check_fault(unsigned long address, struct pt_regs *regs)
 {
@@ -109,9 +111,7 @@ void do_machine_check_fault(unsigned long address, struct pt_regs *regs)
  */
 void do_non_swi_trap(unsigned long address, struct pt_regs *regs)
 {
-	unsigned int param = regs->ecr_param;
-
-	switch (param) {
+	switch (regs->ecr.param) {
 	case 1:
 		trap_is_brkpt(address, regs);
 		break;
diff --git a/arch/arc/kernel/troubleshoot.c b/arch/arc/kernel/troubleshoot.c
index 7654c2e42dc0..c380d8c30704 100644
--- a/arch/arc/kernel/troubleshoot.c
+++ b/arch/arc/kernel/troubleshoot.c
@@ -90,10 +90,12 @@ static void show_faulting_vma(unsigned long address)
 	 */
 	if (vma) {
 		char buf[ARC_PATH_MAX];
-		char *nm = "?";
+		char *nm = "anon";
 
 		if (vma->vm_file) {
-			nm = file_path(vma->vm_file, buf, ARC_PATH_MAX-1);
+			/* XXX: can we use %pD below and get rid of buf? */
+			nm = d_path(file_user_path(vma->vm_file), buf,
+				    ARC_PATH_MAX-1);
 			if (IS_ERR(nm))
 				nm = "?";
 		}
@@ -115,8 +117,8 @@ static void show_ecr_verbose(struct pt_regs *regs)
 	/* For Data fault, this is data address not instruction addr */
 	address = current->thread.fault_address;
 
-	vec = regs->ecr_vec;
-	cause_code = regs->ecr_cause;
+	vec = regs->ecr.vec;
+	cause_code = regs->ecr.cause;
 
 	/* For DTLB Miss or ProtV, display the memory involved too */
 	if (vec == ECR_V_DTLB_MISS) {
@@ -154,7 +156,7 @@ static void show_ecr_verbose(struct pt_regs *regs)
 		pr_cont("Misaligned r/w from 0x%08lx\n", address);
 #endif
 	} else if (vec == ECR_V_TRAP) {
-		if (regs->ecr_param == 5)
+		if (regs->ecr.param == 5)
 			pr_cont("gcc generated __builtin_trap\n");
 	} else {
 		pr_cont("Check Programmer's Manual\n");
@@ -184,9 +186,10 @@ void show_regs(struct pt_regs *regs)
 	if (user_mode(regs))
 		show_faulting_vma(regs->ret); /* faulting code, not data */
 
-	pr_info("ECR: 0x%08lx EFA: 0x%08lx ERET: 0x%08lx\nSTAT: 0x%08lx",
-		regs->event, current->thread.fault_address, regs->ret,
-		regs->status32);
+	pr_info("ECR: 0x%08lx EFA: 0x%08lx ERET: 0x%08lx\n",
+		regs->ecr.full, current->thread.fault_address, regs->ret);
+
+	pr_info("STAT32: 0x%08lx", regs->status32);
 
 #define STS_BIT(r, bit)	r->status32 & STATUS_##bit##_MASK ? #bit" " : ""
 
diff --git a/arch/arc/kernel/unaligned.c b/arch/arc/kernel/unaligned.c
index 99a9b92ed98d..3b2d8b1bd271 100644
--- a/arch/arc/kernel/unaligned.c
+++ b/arch/arc/kernel/unaligned.c
@@ -12,6 +12,7 @@
 #include <linux/ptrace.h>
 #include <linux/uaccess.h>
 #include <asm/disasm.h>
+#include "unaligned.h"
 
 #ifdef CONFIG_CPU_BIG_ENDIAN
 #define BE		1
@@ -199,7 +200,6 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 		     struct callee_regs *cregs)
 {
 	struct disasm_state state;
-	char buf[TASK_COMM_LEN];
 
 	/* handle user mode only and only if enabled by sysadmin */
 	if (!user_mode(regs) || !unaligned_enabled)
@@ -211,11 +211,11 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 			     " performance significantly\n. To enable further"
 			     " logging of such instances, please \n"
 			     " echo 0 > /proc/sys/kernel/ignore-unaligned-usertrap\n",
-			     get_task_comm(buf, current), task_pid_nr(current));
+			     current->comm, task_pid_nr(current));
 	} else {
 		/* Add rate limiting if it gets down to it */
 		pr_warn("%s(%d): unaligned access to/from 0x%lx by PC: 0x%lx\n",
-			get_task_comm(buf, current), task_pid_nr(current),
+			current->comm, task_pid_nr(current),
 			address, regs->ret);
 
 	}
diff --git a/arch/arc/kernel/unaligned.h b/arch/arc/kernel/unaligned.h
new file mode 100644
index 000000000000..5244453bb85f
--- /dev/null
+++ b/arch/arc/kernel/unaligned.h
@@ -0,0 +1,16 @@
+struct pt_regs;
+struct callee_regs;
+
+#ifdef CONFIG_ARC_EMUL_UNALIGNED
+int misaligned_fixup(unsigned long address, struct pt_regs *regs,
+		     struct callee_regs *cregs);
+#else
+static inline int
+misaligned_fixup(unsigned long address, struct pt_regs *regs,
+		 struct callee_regs *cregs)
+{
+	/* Not fixed */
+	return 1;
+}
+#endif
+
diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c
index 200270a94558..789cfb9ea14e 100644
--- a/arch/arc/kernel/unwind.c
+++ b/arch/arc/kernel/unwind.c
@@ -19,7 +19,7 @@
 #include <linux/uaccess.h>
 #include <linux/ptrace.h>
 #include <asm/sections.h>
-#include <asm/unaligned.h>
+#include <linux/unaligned.h>
 #include <asm/unwind.h>
 
 extern char __start_unwind[], __end_unwind[];
@@ -241,15 +241,6 @@ static int cmp_eh_frame_hdr_table_entries(const void *p1, const void *p2)
 	return (e1->start > e2->start) - (e1->start < e2->start);
 }
 
-static void swap_eh_frame_hdr_table_entries(void *p1, void *p2, int size)
-{
-	struct eh_frame_hdr_table_entry *e1 = p1;
-	struct eh_frame_hdr_table_entry *e2 = p2;
-
-	swap(e1->start, e2->start);
-	swap(e1->fde, e2->fde);
-}
-
 static void init_unwind_hdr(struct unwind_table *table,
 			    void *(*alloc) (unsigned long))
 {
@@ -345,7 +336,7 @@ static void init_unwind_hdr(struct unwind_table *table,
 	sort(header->table,
 	     n,
 	     sizeof(*header->table),
-	     cmp_eh_frame_hdr_table_entries, swap_eh_frame_hdr_table_entries);
+	     cmp_eh_frame_hdr_table_entries, NULL);
 
 	table->hdrsz = hdrSize;
 	smp_wmb();
@@ -369,6 +360,8 @@ void *unwind_add_table(struct module *module, const void *table_start,
 		       unsigned long table_size)
 {
 	struct unwind_table *table;
+	struct module_memory *core_text;
+	struct module_memory *init_text;
 
 	if (table_size <= 0)
 		return NULL;
@@ -377,11 +370,11 @@ void *unwind_add_table(struct module *module, const void *table_start,
 	if (!table)
 		return NULL;
 
-	init_unwind_table(table, module->name,
-			  module->core_layout.base, module->core_layout.size,
-			  module->init_layout.base, module->init_layout.size,
-			  table_start, table_size,
-			  NULL, 0);
+	core_text = &module->mem[MOD_TEXT];
+	init_text = &module->mem[MOD_INIT_TEXT];
+
+	init_unwind_table(table, module->name, core_text->base, core_text->size,
+			  init_text->base, init_text->size, table_start, table_size, NULL, 0);
 
 	init_unwind_hdr(table, unw_hdr_alloc);
 
diff --git a/arch/arc/kernel/vmlinux.lds.S b/arch/arc/kernel/vmlinux.lds.S
index 529ae50f9fe2..61a1b2b96e1d 100644
--- a/arch/arc/kernel/vmlinux.lds.S
+++ b/arch/arc/kernel/vmlinux.lds.S
@@ -41,8 +41,8 @@ SECTIONS
 #endif
 
 	/*
-	 * The reason for having a seperate subsection .init.ramfs is to
-	 * prevent objump from including it in kernel dumps
+	 * The reason for having a separate subsection .init.ramfs is to
+	 * prevent objdump from including it in kernel dumps
 	 *
 	 * Reason for having .init.ramfs above .init is to make sure that the
 	 * binary blob is tucked away to one side, reducing the displacement
@@ -85,7 +85,6 @@ SECTIONS
 		_stext = .;
 		TEXT_TEXT
 		SCHED_TEXT
-		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
 		IRQENTRY_TEXT
diff --git a/arch/arc/lib/memset-archs.S b/arch/arc/lib/memset-archs.S
index d2e09fece5bc..d0a5cec4cdca 100644
--- a/arch/arc/lib/memset-archs.S
+++ b/arch/arc/lib/memset-archs.S
@@ -36,12 +36,13 @@
 #endif
 
 ENTRY_CFI(memset)
-	PREFETCHW_INSTR	r0, 0	; Prefetch the first write location
 	mov.f	0, r2
 ;;; if size is zero
 	jz.d	[blink]
 	mov	r3, r0		; don't clobber ret val
 
+	PREFETCHW_INSTR	r0, 0	; Prefetch the first write location
+
 ;;; if length < 8
 	brls.d.nt	r2, 8, .Lsmallchunk
 	mov.f	lp_count,r2
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index 5446967ea98d..7d2f93dc1e91 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -28,6 +28,10 @@ int slc_enable = 1, ioc_enable = 1;
 unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */
 unsigned long perip_end = 0xFFFFFFFF; /* legacy value */
 
+static struct cpuinfo_arc_cache {
+	unsigned int sz_k, line_len, colors;
+} ic_info, dc_info, slc_info;
+
 void (*_cache_line_loop_ic_fn)(phys_addr_t paddr, unsigned long vaddr,
 			       unsigned long sz, const int op, const int full_page);
 
@@ -35,78 +39,24 @@ void (*__dma_cache_wback_inv)(phys_addr_t start, unsigned long sz);
 void (*__dma_cache_inv)(phys_addr_t start, unsigned long sz);
 void (*__dma_cache_wback)(phys_addr_t start, unsigned long sz);
 
-char *arc_cache_mumbojumbo(int c, char *buf, int len)
-{
-	int n = 0;
-	struct cpuinfo_arc_cache *p;
-
-#define PR_CACHE(p, cfg, str)						\
-	if (!(p)->line_len)						\
-		n += scnprintf(buf + n, len - n, str"\t\t: N/A\n");	\
-	else								\
-		n += scnprintf(buf + n, len - n,			\
-			str"\t\t: %uK, %dway/set, %uB Line, %s%s%s\n",	\
-			(p)->sz_k, (p)->assoc, (p)->line_len,		\
-			(p)->vipt ? "VIPT" : "PIPT",			\
-			(p)->alias ? " aliasing" : "",			\
-			IS_USED_CFG(cfg));
-
-	PR_CACHE(&cpuinfo_arc700[c].icache, CONFIG_ARC_HAS_ICACHE, "I-Cache");
-	PR_CACHE(&cpuinfo_arc700[c].dcache, CONFIG_ARC_HAS_DCACHE, "D-Cache");
-
-	p = &cpuinfo_arc700[c].slc;
-	if (p->line_len)
-		n += scnprintf(buf + n, len - n,
-			       "SLC\t\t: %uK, %uB Line%s\n",
-			       p->sz_k, p->line_len, IS_USED_RUN(slc_enable));
-
-	n += scnprintf(buf + n, len - n, "Peripherals\t: %#lx%s%s\n",
-		       perip_base,
-		       IS_AVAIL3(ioc_exists, ioc_enable, ", IO-Coherency (per-device) "));
-
-	return buf;
-}
-
-/*
- * Read the Cache Build Confuration Registers, Decode them and save into
- * the cpuinfo structure for later use.
- * No Validation done here, simply read/convert the BCRs
- */
-static void read_decode_cache_bcr_arcv2(int cpu)
+static int read_decode_cache_bcr_arcv2(int c, char *buf, int len)
 {
-	struct cpuinfo_arc_cache *p_slc = &cpuinfo_arc700[cpu].slc;
+	struct cpuinfo_arc_cache *p_slc = &slc_info;
+	struct bcr_identity ident;
 	struct bcr_generic sbcr;
-
-	struct bcr_slc_cfg {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		unsigned int pad:24, way:2, lsz:2, sz:4;
-#else
-		unsigned int sz:4, lsz:2, way:2, pad:24;
-#endif
-	} slc_cfg;
-
-	struct bcr_clust_cfg {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		unsigned int pad:7, c:1, num_entries:8, num_cores:8, ver:8;
-#else
-		unsigned int ver:8, num_cores:8, num_entries:8, c:1, pad:7;
-#endif
-	} cbcr;
-
-	struct bcr_volatile {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		unsigned int start:4, limit:4, pad:22, order:1, disable:1;
-#else
-		unsigned int disable:1, order:1, pad:22, limit:4, start:4;
-#endif
-	} vol;
-
+	struct bcr_clust_cfg cbcr;
+	struct bcr_volatile vol;
+	int n = 0;
 
 	READ_BCR(ARC_REG_SLC_BCR, sbcr);
 	if (sbcr.ver) {
+		struct bcr_slc_cfg  slc_cfg;
 		READ_BCR(ARC_REG_SLC_CFG, slc_cfg);
 		p_slc->sz_k = 128 << slc_cfg.sz;
 		l2_line_sz = p_slc->line_len = (slc_cfg.lsz == 0) ? 128 : 64;
+		n += scnprintf(buf + n, len - n,
+			       "SLC\t\t: %uK, %uB Line%s\n",
+			       p_slc->sz_k, p_slc->line_len, IS_USED_RUN(slc_enable));
 	}
 
 	READ_BCR(ARC_REG_CLUSTER_BCR, cbcr);
@@ -129,70 +79,82 @@ static void read_decode_cache_bcr_arcv2(int cpu)
 		ioc_enable = 0;
 	}
 
+	READ_BCR(AUX_IDENTITY, ident);
+
 	/* HS 2.0 didn't have AUX_VOL */
-	if (cpuinfo_arc700[cpu].core.family > 0x51) {
+	if (ident.family > 0x51) {
 		READ_BCR(AUX_VOL, vol);
 		perip_base = vol.start << 28;
 		/* HS 3.0 has limit and strict-ordering fields */
-		if (cpuinfo_arc700[cpu].core.family > 0x52)
+		if (ident.family > 0x52)
 			perip_end = (vol.limit << 28) - 1;
 	}
+
+	n += scnprintf(buf + n, len - n, "Peripherals\t: %#lx%s%s\n",
+		       perip_base,
+		       IS_AVAIL3(ioc_exists, ioc_enable, ", IO-Coherency (per-device) "));
+
+	return n;
 }
 
-void read_decode_cache_bcr(void)
+int arc_cache_mumbojumbo(int c, char *buf, int len)
 {
-	struct cpuinfo_arc_cache *p_ic, *p_dc;
-	unsigned int cpu = smp_processor_id();
-	struct bcr_cache {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
-#else
-		unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
-#endif
-	} ibcr, dbcr;
+	struct cpuinfo_arc_cache *p_ic = &ic_info, *p_dc = &dc_info;
+	struct bcr_cache ibcr, dbcr;
+	int vipt, assoc;
+	int n = 0;
 
-	p_ic = &cpuinfo_arc700[cpu].icache;
 	READ_BCR(ARC_REG_IC_BCR, ibcr);
-
 	if (!ibcr.ver)
 		goto dc_chk;
 
-	if (ibcr.ver <= 3) {
+	if (is_isa_arcompact() && (ibcr.ver <= 3)) {
 		BUG_ON(ibcr.config != 3);
-		p_ic->assoc = 2;		/* Fixed to 2w set assoc */
-	} else if (ibcr.ver >= 4) {
-		p_ic->assoc = 1 << ibcr.config;	/* 1,2,4,8 */
+		assoc = 2;		/* Fixed to 2w set assoc */
+	} else if (is_isa_arcv2() && (ibcr.ver >= 4)) {
+		assoc = 1 << ibcr.config;	/* 1,2,4,8 */
 	}
 
 	p_ic->line_len = 8 << ibcr.line_len;
 	p_ic->sz_k = 1 << (ibcr.sz - 1);
-	p_ic->vipt = 1;
-	p_ic->alias = p_ic->sz_k/p_ic->assoc/TO_KB(PAGE_SIZE) > 1;
+	p_ic->colors = p_ic->sz_k/assoc/TO_KB(PAGE_SIZE);
+
+	n += scnprintf(buf + n, len - n,
+			"I-Cache\t\t: %uK, %dway/set, %uB Line, VIPT%s%s\n",
+			p_ic->sz_k, assoc, p_ic->line_len,
+			p_ic->colors > 1 ? " aliasing" : "",
+			IS_USED_CFG(CONFIG_ARC_HAS_ICACHE));
 
 dc_chk:
-	p_dc = &cpuinfo_arc700[cpu].dcache;
 	READ_BCR(ARC_REG_DC_BCR, dbcr);
-
 	if (!dbcr.ver)
 		goto slc_chk;
 
-	if (dbcr.ver <= 3) {
+	if (is_isa_arcompact() && (dbcr.ver <= 3)) {
 		BUG_ON(dbcr.config != 2);
-		p_dc->assoc = 4;		/* Fixed to 4w set assoc */
-		p_dc->vipt = 1;
-		p_dc->alias = p_dc->sz_k/p_dc->assoc/TO_KB(PAGE_SIZE) > 1;
-	} else if (dbcr.ver >= 4) {
-		p_dc->assoc = 1 << dbcr.config;	/* 1,2,4,8 */
-		p_dc->vipt = 0;
-		p_dc->alias = 0;		/* PIPT so can't VIPT alias */
+		vipt = 1;
+		assoc = 4;		/* Fixed to 4w set assoc */
+		p_dc->colors = p_dc->sz_k/assoc/TO_KB(PAGE_SIZE);
+	} else if (is_isa_arcv2() && (dbcr.ver >= 4)) {
+		vipt = 0;
+		assoc = 1 << dbcr.config;	/* 1,2,4,8 */
+		p_dc->colors = 1;		/* PIPT so can't VIPT alias */
 	}
 
 	p_dc->line_len = 16 << dbcr.line_len;
 	p_dc->sz_k = 1 << (dbcr.sz - 1);
 
+	n += scnprintf(buf + n, len - n,
+			"D-Cache\t\t: %uK, %dway/set, %uB Line, %s%s\n",
+			p_dc->sz_k, assoc, p_dc->line_len,
+			vipt ? "VIPT" : "PIPT",
+			IS_USED_CFG(CONFIG_ARC_HAS_DCACHE));
+
 slc_chk:
 	if (is_isa_arcv2())
-                read_decode_cache_bcr_arcv2(cpu);
+		n += read_decode_cache_bcr_arcv2(c, buf + n, len - n);
+
+	return n;
 }
 
 /*
@@ -581,7 +543,7 @@ static void __ic_line_inv_vaddr(phys_addr_t paddr, unsigned long vaddr,
 
 #endif /* CONFIG_ARC_HAS_ICACHE */
 
-noinline void slc_op_rgn(phys_addr_t paddr, unsigned long sz, const int op)
+static noinline void slc_op_rgn(phys_addr_t paddr, unsigned long sz, const int op)
 {
 #ifdef CONFIG_ISA_ARCV2
 	/*
@@ -644,7 +606,7 @@ noinline void slc_op_rgn(phys_addr_t paddr, unsigned long sz, const int op)
 #endif
 }
 
-noinline void slc_op_line(phys_addr_t paddr, unsigned long sz, const int op)
+static __maybe_unused noinline void slc_op_line(phys_addr_t paddr, unsigned long sz, const int op)
 {
 #ifdef CONFIG_ISA_ARCV2
 	/*
@@ -740,47 +702,16 @@ static inline void arc_slc_enable(void)
  * Exported APIs
  */
 
-/*
- * Handle cache congruency of kernel and userspace mappings of page when kernel
- * writes-to/reads-from
- *
- * The idea is to defer flushing of kernel mapping after a WRITE, possible if:
- *  -dcache is NOT aliasing, hence any U/K-mappings of page are congruent
- *  -U-mapping doesn't exist yet for page (finalised in update_mmu_cache)
- *  -In SMP, if hardware caches are coherent
- *
- * There's a corollary case, where kernel READs from a userspace mapped page.
- * If the U-mapping is not congruent to to K-mapping, former needs flushing.
- */
-void flush_dcache_page(struct page *page)
+void flush_dcache_folio(struct folio *folio)
 {
-	struct address_space *mapping;
-
-	if (!cache_is_vipt_aliasing()) {
-		clear_bit(PG_dc_clean, &page->flags);
-		return;
-	}
-
-	/* don't handle anon pages here */
-	mapping = page_mapping_file(page);
-	if (!mapping)
-		return;
-
-	/*
-	 * pagecache page, file not yet mapped to userspace
-	 * Make a note that K-mapping is dirty
-	 */
-	if (!mapping_mapped(mapping)) {
-		clear_bit(PG_dc_clean, &page->flags);
-	} else if (page_mapcount(page)) {
-
-		/* kernel reading from page with U-mapping */
-		phys_addr_t paddr = (unsigned long)page_address(page);
-		unsigned long vaddr = page->index << PAGE_SHIFT;
+	clear_bit(PG_dc_clean, &folio->flags.f);
+	return;
+}
+EXPORT_SYMBOL(flush_dcache_folio);
 
-		if (addr_not_cache_congruent(paddr, vaddr))
-			__flush_dcache_page(paddr, vaddr);
-	}
+void flush_dcache_page(struct page *page)
+{
+	return flush_dcache_folio(page_folio(page));
 }
 EXPORT_SYMBOL(flush_dcache_page);
 
@@ -910,7 +841,7 @@ EXPORT_SYMBOL(flush_icache_range);
  * @vaddr is typically user vaddr (breakpoint) or kernel vaddr (vmalloc)
  *    However in one instance, when called by kprobe (for a breakpt in
  *    builtin kernel code) @vaddr will be paddr only, meaning CDU operation will
- *    use a paddr to index the cache (despite VIPT). This is fine since since a
+ *    use a paddr to index the cache (despite VIPT). This is fine since a
  *    builtin kernel page will not have any virtual mappings.
  *    kprobe on loadable module will be kernel vaddr.
  */
@@ -921,18 +852,18 @@ void __sync_icache_dcache(phys_addr_t paddr, unsigned long vaddr, int len)
 }
 
 /* wrapper to compile time eliminate alignment checks in flush loop */
-void __inv_icache_page(phys_addr_t paddr, unsigned long vaddr)
+void __inv_icache_pages(phys_addr_t paddr, unsigned long vaddr, unsigned nr)
 {
-	__ic_line_inv_vaddr(paddr, vaddr, PAGE_SIZE);
+	__ic_line_inv_vaddr(paddr, vaddr, nr * PAGE_SIZE);
 }
 
 /*
  * wrapper to clearout kernel or userspace mappings of a page
  * For kernel mappings @vaddr == @paddr
  */
-void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr)
+void __flush_dcache_pages(phys_addr_t paddr, unsigned long vaddr, unsigned nr)
 {
-	__dc_line_op(paddr, vaddr & PAGE_MASK, PAGE_SIZE, OP_FLUSH_N_INV);
+	__dc_line_op(paddr, vaddr & PAGE_MASK, nr * PAGE_SIZE, OP_FLUSH_N_INV);
 }
 
 noinline void flush_cache_all(void)
@@ -948,89 +879,18 @@ noinline void flush_cache_all(void)
 
 }
 
-#ifdef CONFIG_ARC_CACHE_VIPT_ALIASING
-
-void flush_cache_mm(struct mm_struct *mm)
-{
-	flush_cache_all();
-}
-
-void flush_cache_page(struct vm_area_struct *vma, unsigned long u_vaddr,
-		      unsigned long pfn)
-{
-	phys_addr_t paddr = pfn << PAGE_SHIFT;
-
-	u_vaddr &= PAGE_MASK;
-
-	__flush_dcache_page(paddr, u_vaddr);
-
-	if (vma->vm_flags & VM_EXEC)
-		__inv_icache_page(paddr, u_vaddr);
-}
-
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-		       unsigned long end)
-{
-	flush_cache_all();
-}
-
-void flush_anon_page(struct vm_area_struct *vma, struct page *page,
-		     unsigned long u_vaddr)
-{
-	/* TBD: do we really need to clear the kernel mapping */
-	__flush_dcache_page((phys_addr_t)page_address(page), u_vaddr);
-	__flush_dcache_page((phys_addr_t)page_address(page),
-			    (phys_addr_t)page_address(page));
-
-}
-
-#endif
-
 void copy_user_highpage(struct page *to, struct page *from,
 	unsigned long u_vaddr, struct vm_area_struct *vma)
 {
+	struct folio *src = page_folio(from);
+	struct folio *dst = page_folio(to);
 	void *kfrom = kmap_atomic(from);
 	void *kto = kmap_atomic(to);
-	int clean_src_k_mappings = 0;
-
-	/*
-	 * If SRC page was already mapped in userspace AND it's U-mapping is
-	 * not congruent with K-mapping, sync former to physical page so that
-	 * K-mapping in memcpy below, sees the right data
-	 *
-	 * Note that while @u_vaddr refers to DST page's userspace vaddr, it is
-	 * equally valid for SRC page as well
-	 *
-	 * For !VIPT cache, all of this gets compiled out as
-	 * addr_not_cache_congruent() is 0
-	 */
-	if (page_mapcount(from) && addr_not_cache_congruent(kfrom, u_vaddr)) {
-		__flush_dcache_page((unsigned long)kfrom, u_vaddr);
-		clean_src_k_mappings = 1;
-	}
 
 	copy_page(kto, kfrom);
 
-	/*
-	 * Mark DST page K-mapping as dirty for a later finalization by
-	 * update_mmu_cache(). Although the finalization could have been done
-	 * here as well (given that both vaddr/paddr are available).
-	 * But update_mmu_cache() already has code to do that for other
-	 * non copied user pages (e.g. read faults which wire in pagecache page
-	 * directly).
-	 */
-	clear_bit(PG_dc_clean, &to->flags);
-
-	/*
-	 * if SRC was already usermapped and non-congruent to kernel mapping
-	 * sync the kernel mapping back to physical page
-	 */
-	if (clean_src_k_mappings) {
-		__flush_dcache_page((unsigned long)kfrom, (unsigned long)kfrom);
-		set_bit(PG_dc_clean, &from->flags);
-	} else {
-		clear_bit(PG_dc_clean, &from->flags);
-	}
+	clear_bit(PG_dc_clean, &dst->flags.f);
+	clear_bit(PG_dc_clean, &src->flags.f);
 
 	kunmap_atomic(kto);
 	kunmap_atomic(kfrom);
@@ -1038,8 +898,9 @@ void copy_user_highpage(struct page *to, struct page *from,
 
 void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
 {
+	struct folio *folio = page_folio(page);
 	clear_page(to);
-	clear_bit(PG_dc_clean, &page->flags);
+	clear_bit(PG_dc_clean, &folio->flags.f);
 }
 EXPORT_SYMBOL(clear_user_page);
 
@@ -1069,7 +930,7 @@ SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags)
  * 3. All Caches need to be disabled when setting up IOC to elide any in-flight
  *    Coherency transactions
  */
-noinline void __init arc_ioc_setup(void)
+static noinline void __init arc_ioc_setup(void)
 {
 	unsigned int ioc_base, mem_sz;
 
@@ -1131,12 +992,10 @@ noinline void __init arc_ioc_setup(void)
  *    one core suffices for all
  *  - IOC setup / dma callbacks only need to be done once
  */
-void __init arc_cache_init_master(void)
+static noinline void __init arc_cache_init_master(void)
 {
-	unsigned int __maybe_unused cpu = smp_processor_id();
-
 	if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) {
-		struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
+		struct cpuinfo_arc_cache *ic = &ic_info;
 
 		if (!ic->line_len)
 			panic("cache support enabled but non-existent cache\n");
@@ -1149,14 +1008,14 @@ void __init arc_cache_init_master(void)
 		 * In MMU v4 (HS38x) the aliasing icache config uses IVIL/PTAG
 		 * pair to provide vaddr/paddr respectively, just as in MMU v3
 		 */
-		if (is_isa_arcv2() && ic->alias)
+		if (is_isa_arcv2() && ic->colors > 1)
 			_cache_line_loop_ic_fn = __cache_line_loop_v3;
 		else
 			_cache_line_loop_ic_fn = __cache_line_loop;
 	}
 
 	if (IS_ENABLED(CONFIG_ARC_HAS_DCACHE)) {
-		struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache;
+		struct cpuinfo_arc_cache *dc = &dc_info;
 
 		if (!dc->line_len)
 			panic("cache support enabled but non-existent cache\n");
@@ -1166,18 +1025,8 @@ void __init arc_cache_init_master(void)
 			      dc->line_len, L1_CACHE_BYTES);
 
 		/* check for D-Cache aliasing on ARCompact: ARCv2 has PIPT */
-		if (is_isa_arcompact()) {
-			int handled = IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
-			int num_colors = dc->sz_k/dc->assoc/TO_KB(PAGE_SIZE);
-
-			if (dc->alias) {
-				if (!handled)
-					panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
-				if (CACHE_COLORS_NUM != num_colors)
-					panic("CACHE_COLORS_NUM not optimized for config\n");
-			} else if (!dc->alias && handled) {
-				panic("Disable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
-			}
+		if (is_isa_arcompact() && dc->colors > 1) {
+			panic("Aliasing VIPT cache not supported\n");
 		}
 	}
 
@@ -1218,9 +1067,6 @@ void __init arc_cache_init_master(void)
 void __ref arc_cache_init(void)
 {
 	unsigned int __maybe_unused cpu = smp_processor_id();
-	char str[256];
-
-	pr_info("%s", arc_cache_mumbojumbo(0, str, sizeof(str)));
 
 	if (!cpu)
 		arc_cache_init_master();
diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c
index 2a7fbbb83b70..6b85e94f3275 100644
--- a/arch/arc/mm/dma.c
+++ b/arch/arc/mm/dma.c
@@ -90,8 +90,7 @@ void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
 /*
  * Plug in direct dma map ops.
  */
-void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-			const struct iommu_ops *iommu, bool coherent)
+void arch_setup_dma_ops(struct device *dev, bool coherent)
 {
 	/*
 	 * IOC hardware snoops all DMA traffic keeping the caches consistent
diff --git a/arch/arc/mm/extable.c b/arch/arc/mm/extable.c
index 4e14c4244ea2..88fa3a4d4906 100644
--- a/arch/arc/mm/extable.c
+++ b/arch/arc/mm/extable.c
@@ -22,14 +22,3 @@ int fixup_exception(struct pt_regs *regs)
 
 	return 0;
 }
-
-#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
-
-unsigned long arc_clear_user_noinline(void __user *to,
-		unsigned long n)
-{
-	return __arc_clear_user(to, n);
-}
-EXPORT_SYMBOL(arc_clear_user_noinline);
-
-#endif
diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c
index 5ca59a482632..95119a5e7761 100644
--- a/arch/arc/mm/fault.c
+++ b/arch/arc/mm/fault.c
@@ -13,6 +13,7 @@
 #include <linux/kdebug.h>
 #include <linux/perf_event.h>
 #include <linux/mm_types.h>
+#include <asm/entry.h>
 #include <asm/mmu.h>
 
 /*
@@ -99,10 +100,10 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 	if (faulthandler_disabled() || !mm)
 		goto no_context;
 
-	if (regs->ecr_cause & ECR_C_PROTV_STORE)	/* ST/EX */
+	if (regs->ecr.cause & ECR_C_PROTV_STORE)	/* ST/EX */
 		write = 1;
-	else if ((regs->ecr_vec == ECR_V_PROTV) &&
-	         (regs->ecr_cause == ECR_C_PROTV_INST_FETCH))
+	else if ((regs->ecr.vec == ECR_V_PROTV) &&
+	         (regs->ecr.cause == ECR_C_PROTV_INST_FETCH))
 		exec = 1;
 
 	flags = FAULT_FLAG_DEFAULT;
@@ -113,15 +114,9 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 retry:
-	mmap_read_lock(mm);
-
-	vma = find_vma(mm, address);
+	vma = lock_mm_and_find_vma(mm, address, regs);
 	if (!vma)
-		goto bad_area;
-	if (unlikely(address < vma->vm_start)) {
-		if (!(vma->vm_flags & VM_GROWSDOWN) || expand_stack(vma, address))
-			goto bad_area;
-	}
+		goto bad_area_nosemaphore;
 
 	/*
 	 * vm_area is good, now check permissions for this memory access
@@ -161,6 +156,7 @@ retry:
 bad_area:
 	mmap_read_unlock(mm);
 
+bad_area_nosemaphore:
 	/*
 	 * Major/minor page fault accounting
 	 * (in case of retry we only land here once)
diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
index ce4e939a7f07..a73cc94f806e 100644
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -15,6 +15,7 @@
 #include <linux/highmem.h>
 #include <asm/page.h>
 #include <asm/sections.h>
+#include <asm/setup.h>
 #include <asm/arcregs.h>
 
 pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE);
@@ -74,11 +75,6 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 		base, TO_MB(size), !in_use ? "Not used":"");
 }
 
-bool arch_has_descending_max_zone_pfns(void)
-{
-	return !IS_ENABLED(CONFIG_ARC_HAS_PAE40);
-}
-
 /*
  * First memory setup routine called from setup_arch()
  * 1. setup swapper's mm @init_mm
@@ -92,7 +88,7 @@ void __init setup_arch_memory(void)
 	setup_initial_init_mm(_text, _etext, _edata, _end);
 
 	/* first page of system - kernel .vector starts here */
-	min_low_pfn = virt_to_pfn(CONFIG_LINUX_RAM_BASE);
+	min_low_pfn = virt_to_pfn((void *)CONFIG_LINUX_RAM_BASE);
 
 	/* Last usable page of low mem */
 	max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
@@ -154,41 +150,18 @@ void __init setup_arch_memory(void)
 	 */
 	max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
 
-	high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
-
 	arch_pfn_offset = min(min_low_pfn, min_high_pfn);
 	kmap_init();
-
-#else /* CONFIG_HIGHMEM */
-	/* pfn_valid() uses this when FLATMEM=y and HIGHMEM=n */
-	max_mapnr = max_low_pfn - min_low_pfn;
-
 #endif /* CONFIG_HIGHMEM */
 
 	free_area_init(max_zone_pfn);
 }
 
-static void __init highmem_init(void)
+void __init arch_mm_preinit(void)
 {
 #ifdef CONFIG_HIGHMEM
-	unsigned long tmp;
-
 	memblock_phys_free(high_mem_start, high_mem_sz);
-	for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
-		free_highmem_page(pfn_to_page(tmp));
 #endif
-}
-
-/*
- * mem_init - initializes memory
- *
- * Frees up bootmem
- * Calculates and displays memory available/used
- */
-void __init mem_init(void)
-{
-	memblock_free_all();
-	highmem_init();
 
 	BUILD_BUG_ON((PTRS_PER_PGD * sizeof(pgd_t)) > PAGE_SIZE);
 	BUILD_BUG_ON((PTRS_PER_PUD * sizeof(pud_t)) > PAGE_SIZE);
diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c
index 0ee75aca6e10..fd8897a0e52c 100644
--- a/arch/arc/mm/ioremap.c
+++ b/arch/arc/mm/ioremap.c
@@ -8,7 +8,6 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/cache.h>
 
 static inline bool arc_uncached_addr_space(phys_addr_t paddr)
@@ -25,13 +24,6 @@ static inline bool arc_uncached_addr_space(phys_addr_t paddr)
 
 void __iomem *ioremap(phys_addr_t paddr, unsigned long size)
 {
-	phys_addr_t end;
-
-	/* Don't allow wraparound or zero size */
-	end = paddr + size - 1;
-	if (!size || (end < paddr))
-		return NULL;
-
 	/*
 	 * If the region is h/w uncached, MMU mapping can be elided as optim
 	 * The cast to u32 is fine as this region can only be inside 4GB
@@ -40,7 +32,7 @@ void __iomem *ioremap(phys_addr_t paddr, unsigned long size)
 		return (void __iomem *)(u32)paddr;
 
 	return ioremap_prot(paddr, size,
-			    pgprot_val(pgprot_noncached(PAGE_KERNEL)));
+			    pgprot_noncached(PAGE_KERNEL));
 }
 EXPORT_SYMBOL(ioremap);
 
@@ -51,55 +43,20 @@ EXPORT_SYMBOL(ioremap);
  * ARC hardware uncached region, this one still goes thru the MMU as caller
  * might need finer access control (R/W/X)
  */
-void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
-			   unsigned long flags)
+void __iomem *ioremap_prot(phys_addr_t paddr, size_t size,
+			   pgprot_t prot)
 {
-	unsigned int off;
-	unsigned long vaddr;
-	struct vm_struct *area;
-	phys_addr_t end;
-	pgprot_t prot = __pgprot(flags);
-
-	/* Don't allow wraparound, zero size */
-	end = paddr + size - 1;
-	if ((!size) || (end < paddr))
-		return NULL;
-
-	/* An early platform driver might end up here */
-	if (!slab_is_available())
-		return NULL;
-
 	/* force uncached */
-	prot = pgprot_noncached(prot);
-
-	/* Mappings have to be page-aligned */
-	off = paddr & ~PAGE_MASK;
-	paddr &= PAGE_MASK_PHYS;
-	size = PAGE_ALIGN(end + 1) - paddr;
-
-	/*
-	 * Ok, go for it..
-	 */
-	area = get_vm_area(size, VM_IOREMAP);
-	if (!area)
-		return NULL;
-	area->phys_addr = paddr;
-	vaddr = (unsigned long)area->addr;
-	if (ioremap_page_range(vaddr, vaddr + size, paddr, prot)) {
-		vunmap((void __force *)vaddr);
-		return NULL;
-	}
-	return (void __iomem *)(off + (char __iomem *)vaddr);
+	return generic_ioremap_prot(paddr, size, pgprot_noncached(prot));
 }
 EXPORT_SYMBOL(ioremap_prot);
 
-
-void iounmap(const void __iomem *addr)
+void iounmap(volatile void __iomem *addr)
 {
 	/* weird double cast to handle phys_addr_t > 32 bits */
 	if (arc_uncached_addr_space((phys_addr_t)(u32)addr))
 		return;
 
-	vfree((void *)(PAGE_MASK & (unsigned long __force)addr));
+	generic_iounmap(addr);
 }
 EXPORT_SYMBOL(iounmap);
diff --git a/arch/arc/mm/mmap.c b/arch/arc/mm/mmap.c
index fce5fa2b4f52..2185afe8d59f 100644
--- a/arch/arc/mm/mmap.c
+++ b/arch/arc/mm/mmap.c
@@ -14,10 +14,6 @@
 
 #include <asm/cacheflush.h>
 
-#define COLOUR_ALIGN(addr, pgoff)			\
-	((((addr) + SHMLBA - 1) & ~(SHMLBA - 1)) +	\
-	 (((pgoff) << PAGE_SHIFT) & (SHMLBA - 1)))
-
 /*
  * Ensure that shared mappings are correctly aligned to
  * avoid aliasing issues with VIPT caches.
@@ -27,25 +23,18 @@
  */
 unsigned long
 arch_get_unmapped_area(struct file *filp, unsigned long addr,
-		unsigned long len, unsigned long pgoff, unsigned long flags)
+		unsigned long len, unsigned long pgoff,
+		unsigned long flags, vm_flags_t vm_flags)
 {
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
-	int do_align = 0;
-	int aliasing = cache_is_vipt_aliasing();
-	struct vm_unmapped_area_info info;
-
-	/*
-	 * We only need to do colour alignment if D cache aliases.
-	 */
-	if (aliasing)
-		do_align = filp || (flags & MAP_SHARED);
+	struct vm_unmapped_area_info info = {};
 
 	/*
 	 * We enforce the MAP_FIXED case.
 	 */
 	if (flags & MAP_FIXED) {
-		if (aliasing && flags & MAP_SHARED &&
+		if (flags & MAP_SHARED &&
 		    (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))
 			return -EINVAL;
 		return addr;
@@ -55,10 +44,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		return -ENOMEM;
 
 	if (addr) {
-		if (do_align)
-			addr = COLOUR_ALIGN(addr, pgoff);
-		else
-			addr = PAGE_ALIGN(addr);
+		addr = PAGE_ALIGN(addr);
 
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
@@ -66,11 +52,9 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 			return addr;
 	}
 
-	info.flags = 0;
 	info.length = len;
 	info.low_limit = mm->mmap_base;
 	info.high_limit = TASK_SIZE;
-	info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0;
 	info.align_offset = pgoff << PAGE_SHIFT;
 	return vm_unmapped_area(&info);
 }
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index 5f71445f26bd..ed6915ba76ec 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -18,7 +18,9 @@
 /* A copy of the ASID from the PID reg is kept in asid_cache */
 DEFINE_PER_CPU(unsigned int, asid_cache) = MM_CTXT_FIRST_CYCLE;
 
-static int __read_mostly pae_exists;
+static struct cpuinfo_arc_mmu {
+	unsigned int ver, pg_sz_k, s_pg_sz_m, pae, sets, ways;
+} mmuinfo;
 
 /*
  * Utility Routine to erase a J-TLB entry
@@ -131,7 +133,7 @@ static void tlb_entry_insert(unsigned int pd0, phys_addr_t pd1)
 
 noinline void local_flush_tlb_all(void)
 {
-	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
+	struct cpuinfo_arc_mmu *mmu = &mmuinfo;
 	unsigned long flags;
 	unsigned int entry;
 	int num_tlb = mmu->sets * mmu->ways;
@@ -210,7 +212,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 	unsigned long flags;
 
 	/* If range @start to @end is more than 32 TLB entries deep,
-	 * its better to move to a new ASID rather than searching for
+	 * it's better to move to a new ASID rather than searching for
 	 * individual entries and then shooting them down
 	 *
 	 * The calc above is rough, doesn't account for unaligned parts,
@@ -389,7 +391,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 /*
  * Routine to create a TLB entry
  */
-void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
+static void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
 {
 	unsigned long flags;
 	unsigned int asid_or_sasid, rwx;
@@ -406,7 +408,7 @@ void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
 	 * -More importantly it makes this handler inconsistent with fast-path
 	 *  TLB Refill handler which always deals with "current"
 	 *
-	 * Lets see the use cases when current->mm != vma->mm and we land here
+	 * Let's see the use cases when current->mm != vma->mm and we land here
 	 *  1. execve->copy_strings()->__get_user_pages->handle_mm_fault
 	 *     Here VM wants to pre-install a TLB entry for user stack while
 	 *     current->mm still points to pre-execve mm (hence the condition).
@@ -467,8 +469,8 @@ void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
  * Note that flush (when done) involves both WBACK - so physical page is
  * in sync as well as INV - so any non-congruent aliases don't remain
  */
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
-		      pte_t *ptep)
+void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
+		unsigned long vaddr_unaligned, pte_t *ptep, unsigned int nr)
 {
 	unsigned long vaddr = vaddr_unaligned & PAGE_MASK;
 	phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK_PHYS;
@@ -476,30 +478,28 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
 
 	create_tlb(vma, vaddr, ptep);
 
-	if (page == ZERO_PAGE(0)) {
+	if (page == ZERO_PAGE(0))
 		return;
-	}
 
 	/*
-	 * Exec page : Independent of aliasing/page-color considerations,
-	 *	       since icache doesn't snoop dcache on ARC, any dirty
-	 *	       K-mapping of a code page needs to be wback+inv so that
-	 *	       icache fetch by userspace sees code correctly.
-	 * !EXEC page: If K-mapping is NOT congruent to U-mapping, flush it
-	 *	       so userspace sees the right data.
-	 *  (Avoids the flush for Non-exec + congruent mapping case)
+	 * For executable pages, since icache doesn't snoop dcache, any
+	 * dirty K-mapping of a code page needs to be wback+inv so that
+	 * icache fetch by userspace sees code correctly.
 	 */
-	if ((vma->vm_flags & VM_EXEC) ||
-	     addr_not_cache_congruent(paddr, vaddr)) {
-
-		int dirty = !test_and_set_bit(PG_dc_clean, &page->flags);
+	if (vma->vm_flags & VM_EXEC) {
+		struct folio *folio = page_folio(page);
+		int dirty = !test_and_set_bit(PG_dc_clean, &folio->flags.f);
 		if (dirty) {
+			unsigned long offset = offset_in_folio(folio, paddr);
+			nr = folio_nr_pages(folio);
+			paddr -= offset;
+			vaddr -= offset;
 			/* wback + inv dcache lines (K-mapping) */
-			__flush_dcache_page(paddr, paddr);
+			__flush_dcache_pages(paddr, paddr, nr);
 
 			/* invalidate any existing icache lines (U-mapping) */
 			if (vma->vm_flags & VM_EXEC)
-				__inv_icache_page(paddr, vaddr);
+				__inv_icache_pages(paddr, vaddr, nr);
 		}
 	}
 }
@@ -531,7 +531,7 @@ void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr,
 				 pmd_t *pmd)
 {
 	pte_t pte = __pte(pmd_val(*pmd));
-	update_mmu_cache(vma, addr, &pte);
+	update_mmu_cache_range(NULL, vma, addr, &pte, HPAGE_PMD_NR);
 }
 
 void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
@@ -560,89 +560,64 @@ void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
  * the cpuinfo structure for later use.
  * No Validation is done here, simply read/convert the BCRs
  */
-void read_decode_mmu_bcr(void)
+int arc_mmu_mumbojumbo(int c, char *buf, int len)
 {
-	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
-	unsigned int tmp;
-	struct bcr_mmu_3 {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int ver:8, ways:4, sets:4, res:3, sasid:1, pg_sz:4,
-		     u_itlb:4, u_dtlb:4;
-#else
-	unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, sasid:1, res:3, sets:4,
-		     ways:4, ver:8;
-#endif
-	} *mmu3;
-
-	struct bcr_mmu_4 {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int ver:8, sasid:1, sz1:4, sz0:4, res:2, pae:1,
-		     n_ways:2, n_entry:2, n_super:2, u_itlb:3, u_dtlb:3;
-#else
-	/*           DTLB      ITLB      JES        JE         JA      */
-	unsigned int u_dtlb:3, u_itlb:3, n_super:2, n_entry:2, n_ways:2,
-		     pae:1, res:2, sz0:4, sz1:4, sasid:1, ver:8;
-#endif
-	} *mmu4;
+	struct cpuinfo_arc_mmu *mmu = &mmuinfo;
+	unsigned int bcr, u_dtlb, u_itlb, sasid;
+	struct bcr_mmu_3 *mmu3;
+	struct bcr_mmu_4 *mmu4;
+	char super_pg[64] = "";
+	int n = 0;
 
-	tmp = read_aux_reg(ARC_REG_MMU_BCR);
-	mmu->ver = (tmp >> 24);
+	bcr = read_aux_reg(ARC_REG_MMU_BCR);
+	mmu->ver = (bcr >> 24);
 
 	if (is_isa_arcompact() && mmu->ver == 3) {
-		mmu3 = (struct bcr_mmu_3 *)&tmp;
+		mmu3 = (struct bcr_mmu_3 *)&bcr;
 		mmu->pg_sz_k = 1 << (mmu3->pg_sz - 1);
 		mmu->sets = 1 << mmu3->sets;
 		mmu->ways = 1 << mmu3->ways;
-		mmu->u_dtlb = mmu3->u_dtlb;
-		mmu->u_itlb = mmu3->u_itlb;
-		mmu->sasid = mmu3->sasid;
+		u_dtlb = mmu3->u_dtlb;
+		u_itlb = mmu3->u_itlb;
+		sasid = mmu3->sasid;
 	} else {
-		mmu4 = (struct bcr_mmu_4 *)&tmp;
+		mmu4 = (struct bcr_mmu_4 *)&bcr;
 		mmu->pg_sz_k = 1 << (mmu4->sz0 - 1);
 		mmu->s_pg_sz_m = 1 << (mmu4->sz1 - 11);
 		mmu->sets = 64 << mmu4->n_entry;
 		mmu->ways = mmu4->n_ways * 2;
-		mmu->u_dtlb = mmu4->u_dtlb * 4;
-		mmu->u_itlb = mmu4->u_itlb * 4;
-		mmu->sasid = mmu4->sasid;
-		pae_exists = mmu->pae = mmu4->pae;
+		u_dtlb = mmu4->u_dtlb * 4;
+		u_itlb = mmu4->u_itlb * 4;
+		sasid = mmu4->sasid;
+		mmu->pae = mmu4->pae;
 	}
-}
 
-char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len)
-{
-	int n = 0;
-	struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[cpu_id].mmu;
-	char super_pg[64] = "";
-
-	if (p_mmu->s_pg_sz_m)
-		scnprintf(super_pg, 64, "%dM Super Page %s",
-			  p_mmu->s_pg_sz_m,
-			  IS_USED_CFG(CONFIG_TRANSPARENT_HUGEPAGE));
+	if (mmu->s_pg_sz_m)
+		scnprintf(super_pg, 64, "/%dM%s",
+			  mmu->s_pg_sz_m,
+			  IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) ? " (THP enabled)":"");
 
 	n += scnprintf(buf + n, len - n,
-		      "MMU [v%x]\t: %dk PAGE, %s, swalk %d lvl, JTLB %d (%dx%d), uDTLB %d, uITLB %d%s%s\n",
-		       p_mmu->ver, p_mmu->pg_sz_k, super_pg,  CONFIG_PGTABLE_LEVELS,
-		       p_mmu->sets * p_mmu->ways, p_mmu->sets, p_mmu->ways,
-		       p_mmu->u_dtlb, p_mmu->u_itlb,
-		       IS_AVAIL2(p_mmu->pae, ", PAE40 ", CONFIG_ARC_HAS_PAE40));
-
-	return buf;
+		      "MMU [v%x]\t: %dk%s, swalk %d lvl, JTLB %dx%d, uDTLB %d, uITLB %d%s%s%s\n",
+		       mmu->ver, mmu->pg_sz_k, super_pg, CONFIG_PGTABLE_LEVELS,
+		       mmu->sets, mmu->ways,
+		       u_dtlb, u_itlb,
+		       IS_AVAIL1(sasid, ", SASID"),
+		       IS_AVAIL2(mmu->pae, ", PAE40 ", CONFIG_ARC_HAS_PAE40));
+
+	return n;
 }
 
 int pae40_exist_but_not_enab(void)
 {
-	return pae_exists && !is_pae40_enabled();
+	return mmuinfo.pae && !is_pae40_enabled();
 }
 
 void arc_mmu_init(void)
 {
-	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
-	char str[256];
+	struct cpuinfo_arc_mmu *mmu = &mmuinfo;
 	int compat = 0;
 
-	pr_info("%s", arc_mmu_mumbojumbo(0, str, sizeof(str)));
-
 	/*
 	 * Can't be done in processor.h due to header include dependencies
 	 */
@@ -719,7 +694,7 @@ volatile int dup_pd_silent; /* Be silent abt it or complain (default) */
 void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
 			  struct pt_regs *regs)
 {
-	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
+	struct cpuinfo_arc_mmu *mmu = &mmuinfo;
 	unsigned long flags;
 	int set, n_ways = mmu->ways;
 
diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S
index e054780a8fe0..dc65e87a531f 100644
--- a/arch/arc/mm/tlbex.S
+++ b/arch/arc/mm/tlbex.S
@@ -5,19 +5,19 @@
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  *
  * Vineetg: April 2011 :
- *  -MMU v1: moved out legacy code into a seperate file
+ *  -MMU v1: moved out legacy code into a separate file
  *  -MMU v3: PD{0,1} bits layout changed: They don't overlap anymore,
  *      helps avoid a shift when preparing PD0 from PTE
  *
  * Vineetg: July 2009
- *  -For MMU V2, we need not do heuristics at the time of commiting a D-TLB
- *   entry, so that it doesn't knock out it's I-TLB entry
+ *  -For MMU V2, we need not do heuristics at the time of committing a D-TLB
+ *   entry, so that it doesn't knock out its I-TLB entry
  *  -Some more fine tuning:
  *   bmsk instead of add, asl.cc instead of branch, delay slot utilise etc
  *
  * Vineetg: July 2009
  *  -Practically rewrote the I/D TLB Miss handlers
- *   Now 40 and 135 instructions a peice as compared to 131 and 449 resp.
+ *   Now 40 and 135 instructions apiece as compared to 131 and 449 resp.
  *   Hence Leaner by 1.5 K
  *   Used Conditional arithmetic to replace excessive branching
  *   Also used short instructions wherever possible
diff --git a/arch/arc/net/Makefile b/arch/arc/net/Makefile
new file mode 100644
index 000000000000..ea5790952e9a
--- /dev/null
+++ b/arch/arc/net/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+ifeq ($(CONFIG_ISA_ARCV2),y)
+	obj-$(CONFIG_BPF_JIT) += bpf_jit_core.o
+	obj-$(CONFIG_BPF_JIT) += bpf_jit_arcv2.o
+endif
diff --git a/arch/arc/net/bpf_jit.h b/arch/arc/net/bpf_jit.h
new file mode 100644
index 000000000000..495f3023e4c1
--- /dev/null
+++ b/arch/arc/net/bpf_jit.h
@@ -0,0 +1,164 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * The interface that a back-end should provide to bpf_jit_core.c.
+ *
+ * Copyright (c) 2024 Synopsys Inc.
+ * Author: Shahab Vahedi <shahab@synopsys.com>
+ */
+
+#ifndef _ARC_BPF_JIT_H
+#define _ARC_BPF_JIT_H
+
+#include <linux/bpf.h>
+#include <linux/filter.h>
+
+/* Print debug info and assert. */
+//#define ARC_BPF_JIT_DEBUG
+
+/* Determine the address type of the target. */
+#ifdef CONFIG_ISA_ARCV2
+#define ARC_ADDR u32
+#endif
+
+/*
+ * For the translation of some BPF instructions, a temporary register
+ * might be needed for some interim data.
+ */
+#define JIT_REG_TMP MAX_BPF_JIT_REG
+
+/*
+ * Buffer access: If buffer "b" is not NULL, advance by "n" bytes.
+ *
+ * This macro must be used in any place that potentially requires a
+ * "buf + len". This way, we make sure that the "buf" argument for
+ * the underlying "arc_*(buf, ...)" ends up as NULL instead of something
+ * like "0+4" or "0+8", etc. Those "arc_*()" functions check their "buf"
+ * value to decide if instructions should be emitted or not.
+ */
+#define BUF(b, n) (((b) != NULL) ? ((b) + (n)) : (b))
+
+/************** Functions that the back-end must provide **************/
+/* Extension for 32-bit operations. */
+u8 zext(u8 *buf, u8 rd);
+/***** Moves *****/
+u8 mov_r32(u8 *buf, u8 rd, u8 rs, u8 sign_ext);
+u8 mov_r32_i32(u8 *buf, u8 reg, s32 imm);
+u8 mov_r64(u8 *buf, u8 rd, u8 rs, u8 sign_ext);
+u8 mov_r64_i32(u8 *buf, u8 reg, s32 imm);
+u8 mov_r64_i64(u8 *buf, u8 reg, u32 lo, u32 hi);
+/***** Loads and stores *****/
+u8 load_r(u8 *buf, u8 rd, u8 rs, s16 off, u8 size, bool sign_ext);
+u8 store_r(u8 *buf, u8 rd, u8 rs, s16 off, u8 size);
+u8 store_i(u8 *buf, s32 imm, u8 rd, s16 off, u8 size);
+/***** Addition *****/
+u8 add_r32(u8 *buf, u8 rd, u8 rs);
+u8 add_r32_i32(u8 *buf, u8 rd, s32 imm);
+u8 add_r64(u8 *buf, u8 rd, u8 rs);
+u8 add_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Subtraction *****/
+u8 sub_r32(u8 *buf, u8 rd, u8 rs);
+u8 sub_r32_i32(u8 *buf, u8 rd, s32 imm);
+u8 sub_r64(u8 *buf, u8 rd, u8 rs);
+u8 sub_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Multiplication *****/
+u8 mul_r32(u8 *buf, u8 rd, u8 rs);
+u8 mul_r32_i32(u8 *buf, u8 rd, s32 imm);
+u8 mul_r64(u8 *buf, u8 rd, u8 rs);
+u8 mul_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Division *****/
+u8 div_r32(u8 *buf, u8 rd, u8 rs, bool sign_ext);
+u8 div_r32_i32(u8 *buf, u8 rd, s32 imm, bool sign_ext);
+/***** Remainder *****/
+u8 mod_r32(u8 *buf, u8 rd, u8 rs, bool sign_ext);
+u8 mod_r32_i32(u8 *buf, u8 rd, s32 imm, bool sign_ext);
+/***** Bitwise AND *****/
+u8 and_r32(u8 *buf, u8 rd, u8 rs);
+u8 and_r32_i32(u8 *buf, u8 rd, s32 imm);
+u8 and_r64(u8 *buf, u8 rd, u8 rs);
+u8 and_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Bitwise OR *****/
+u8 or_r32(u8 *buf, u8 rd, u8 rs);
+u8 or_r32_i32(u8 *buf, u8 rd, s32 imm);
+u8 or_r64(u8 *buf, u8 rd, u8 rs);
+u8 or_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Bitwise XOR *****/
+u8 xor_r32(u8 *buf, u8 rd, u8 rs);
+u8 xor_r32_i32(u8 *buf, u8 rd, s32 imm);
+u8 xor_r64(u8 *buf, u8 rd, u8 rs);
+u8 xor_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Bitwise Negate *****/
+u8 neg_r32(u8 *buf, u8 r);
+u8 neg_r64(u8 *buf, u8 r);
+/***** Bitwise left shift *****/
+u8 lsh_r32(u8 *buf, u8 rd, u8 rs);
+u8 lsh_r32_i32(u8 *buf, u8 rd, u8 imm);
+u8 lsh_r64(u8 *buf, u8 rd, u8 rs);
+u8 lsh_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Bitwise right shift (logical) *****/
+u8 rsh_r32(u8 *buf, u8 rd, u8 rs);
+u8 rsh_r32_i32(u8 *buf, u8 rd, u8 imm);
+u8 rsh_r64(u8 *buf, u8 rd, u8 rs);
+u8 rsh_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Bitwise right shift (arithmetic) *****/
+u8 arsh_r32(u8 *buf, u8 rd, u8 rs);
+u8 arsh_r32_i32(u8 *buf, u8 rd, u8 imm);
+u8 arsh_r64(u8 *buf, u8 rd, u8 rs);
+u8 arsh_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Frame related *****/
+u32 mask_for_used_regs(u8 bpf_reg, bool is_call);
+u8 arc_prologue(u8 *buf, u32 usage, u16 frame_size);
+u8 arc_epilogue(u8 *buf, u32 usage, u16 frame_size);
+/***** Jumps *****/
+/*
+ * Different sorts of conditions (ARC enum as opposed to BPF_*).
+ *
+ * Do not change the order of enums here. ARC_CC_SLE+1 is used
+ * to determine the number of JCCs.
+ */
+enum ARC_CC {
+	ARC_CC_UGT = 0,		/* unsigned >  */
+	ARC_CC_UGE,		/* unsigned >= */
+	ARC_CC_ULT,		/* unsigned <  */
+	ARC_CC_ULE,		/* unsigned <= */
+	ARC_CC_SGT,		/*   signed >  */
+	ARC_CC_SGE,		/*   signed >= */
+	ARC_CC_SLT,		/*   signed <  */
+	ARC_CC_SLE,		/*   signed <= */
+	ARC_CC_AL,		/* always      */
+	ARC_CC_EQ,		/*          == */
+	ARC_CC_NE,		/*          != */
+	ARC_CC_SET,		/* test        */
+	ARC_CC_LAST
+};
+
+/*
+ * A few notes:
+ *
+ * - check_jmp_*() are prerequisites before calling the gen_jmp_*().
+ *   They return "true" if the jump is possible and "false" otherwise.
+ *
+ * - The notion of "*_off" is to emphasize that these parameters are
+ *   merely offsets in the JIT stream and not absolute addresses. One
+ *   can look at them as addresses if the JIT code would start from
+ *   address 0x0000_0000. Nonetheless, since the buffer address for the
+ *   JIT is on a word-aligned address, this works and actually makes
+ *   things simpler (offsets are in the range of u32 which is more than
+ *   enough).
+ */
+bool check_jmp_32(u32 curr_off, u32 targ_off, u8 cond);
+bool check_jmp_64(u32 curr_off, u32 targ_off, u8 cond);
+u8 gen_jmp_32(u8 *buf, u8 rd, u8 rs, u8 cond, u32 c_off, u32 t_off);
+u8 gen_jmp_64(u8 *buf, u8 rd, u8 rs, u8 cond, u32 c_off, u32 t_off);
+/***** Miscellaneous *****/
+u8 gen_func_call(u8 *buf, ARC_ADDR func_addr, bool external_func);
+u8 arc_to_bpf_return(u8 *buf);
+/*
+ * - Perform byte swaps on "rd" based on the "size".
+ * - If "force" is set, do it unconditionally. Otherwise, consider the
+ *   desired "endian"ness and the host endianness.
+ * - For data "size"s up to 32 bits, perform a zero-extension if asked
+ *   by the "do_zext" boolean.
+ */
+u8 gen_swap(u8 *buf, u8 rd, u8 size, u8 endian, bool force, bool do_zext);
+
+#endif /* _ARC_BPF_JIT_H */
diff --git a/arch/arc/net/bpf_jit_arcv2.c b/arch/arc/net/bpf_jit_arcv2.c
new file mode 100644
index 000000000000..6d989b6d88c6
--- /dev/null
+++ b/arch/arc/net/bpf_jit_arcv2.c
@@ -0,0 +1,3007 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The ARCv2 backend of Just-In-Time compiler for eBPF bytecode.
+ *
+ * Copyright (c) 2024 Synopsys Inc.
+ * Author: Shahab Vahedi <shahab@synopsys.com>
+ */
+#include <linux/bug.h>
+#include "bpf_jit.h"
+
+/* ARC core registers. */
+enum {
+	ARC_R_0,  ARC_R_1,  ARC_R_2,  ARC_R_3,  ARC_R_4,  ARC_R_5,
+	ARC_R_6,  ARC_R_7,  ARC_R_8,  ARC_R_9,  ARC_R_10, ARC_R_11,
+	ARC_R_12, ARC_R_13, ARC_R_14, ARC_R_15, ARC_R_16, ARC_R_17,
+	ARC_R_18, ARC_R_19, ARC_R_20, ARC_R_21, ARC_R_22, ARC_R_23,
+	ARC_R_24, ARC_R_25, ARC_R_26, ARC_R_FP, ARC_R_SP, ARC_R_ILINK,
+	ARC_R_30, ARC_R_BLINK,
+	/*
+	 * Having ARC_R_IMM encoded as source register means there is an
+	 * immediate that must be interpreted from the next 4 bytes. If
+	 * encoded as the destination register though, it implies that the
+	 * output of the operation is not assigned to any register. The
+	 * latter is helpful if we only care about updating the CPU status
+	 * flags.
+	 */
+	ARC_R_IMM = 62
+};
+
+/*
+ * Remarks about the rationale behind the chosen mapping:
+ *
+ * - BPF_REG_{1,2,3,4} are the argument registers and must be mapped to
+ *   argument registers in ARCv2 ABI: r0-r7. The r7 registers is the last
+ *   argument register in the ABI. Therefore BPF_REG_5, as the fifth
+ *   argument, must be pushed onto the stack. This is a must for calling
+ *   in-kernel functions.
+ *
+ * - In ARCv2 ABI, the return value is in r0 for 32-bit results and (r1,r0)
+ *   for 64-bit results. However, because they're already used for BPF_REG_1,
+ *   the next available scratch registers, r8 and r9, are the best candidates
+ *   for BPF_REG_0. After a "call" to a(n) (in-kernel) function, the result
+ *   is "mov"ed to these registers. At a BPF_EXIT, their value is "mov"ed to
+ *   (r1,r0).
+ *   It is worth mentioning that scratch registers are the best choice for
+ *   BPF_REG_0, because it is very popular in BPF instruction encoding.
+ *
+ * - JIT_REG_TMP is an artifact needed to translate some BPF instructions.
+ *   Its life span is one single BPF instruction. Since during the
+ *   analyze_reg_usage(), it is not known if temporary registers are used,
+ *   it is mapped to ARC's scratch registers: r10 and r11. Therefore, they
+ *   don't matter in analysing phase and don't need saving. This temporary
+ *   register is added as yet another index in the bpf2arc array, so it will
+ *   unfold like the rest of registers during the code generation process.
+ *
+ * - Mapping of callee-saved BPF registers, BPF_REG_{6,7,8,9}, starts from
+ *   (r15,r14) register pair. The (r13,r12) is not a good choice, because
+ *   in ARCv2 ABI, r12 is not a callee-saved register and this can cause
+ *   problem when calling an in-kernel function. Theoretically, the mapping
+ *   could start from (r14,r13), but it is not a conventional ARCv2 register
+ *   pair. To have a future proof design, I opted for this arrangement.
+ *   If/when we decide to add ARCv2 instructions that do use register pairs,
+ *   the mapping, hopefully, doesn't need to be revisited.
+ */
+static const u8 bpf2arc[][2] = {
+	/* Return value from in-kernel function, and exit value from eBPF */
+	[BPF_REG_0] = {ARC_R_8, ARC_R_9},
+	/* Arguments from eBPF program to in-kernel function */
+	[BPF_REG_1] = {ARC_R_0, ARC_R_1},
+	[BPF_REG_2] = {ARC_R_2, ARC_R_3},
+	[BPF_REG_3] = {ARC_R_4, ARC_R_5},
+	[BPF_REG_4] = {ARC_R_6, ARC_R_7},
+	/* Remaining arguments, to be passed on the stack per 32-bit ABI */
+	[BPF_REG_5] = {ARC_R_22, ARC_R_23},
+	/* Callee-saved registers that in-kernel function will preserve */
+	[BPF_REG_6] = {ARC_R_14, ARC_R_15},
+	[BPF_REG_7] = {ARC_R_16, ARC_R_17},
+	[BPF_REG_8] = {ARC_R_18, ARC_R_19},
+	[BPF_REG_9] = {ARC_R_20, ARC_R_21},
+	/* Read-only frame pointer to access the eBPF stack. 32-bit only. */
+	[BPF_REG_FP] = {ARC_R_FP, },
+	/* Register for blinding constants */
+	[BPF_REG_AX] = {ARC_R_24, ARC_R_25},
+	/* Temporary registers for internal use */
+	[JIT_REG_TMP] = {ARC_R_10, ARC_R_11}
+};
+
+#define ARC_CALLEE_SAVED_REG_FIRST ARC_R_13
+#define ARC_CALLEE_SAVED_REG_LAST  ARC_R_25
+
+#define REG_LO(r) (bpf2arc[(r)][0])
+#define REG_HI(r) (bpf2arc[(r)][1])
+
+/*
+ * To comply with ARCv2 ABI, BPF's arg5 must be put on stack. After which,
+ * the stack needs to be restored by ARG5_SIZE.
+ */
+#define ARG5_SIZE 8
+
+/* Instruction lengths in bytes. */
+enum {
+	INSN_len_normal = 4,	/* Normal instructions length. */
+	INSN_len_imm = 4	/* Length of an extra 32-bit immediate. */
+};
+
+/* ZZ defines the size of operation in encodings that it is used. */
+enum {
+	ZZ_1_byte = 1,
+	ZZ_2_byte = 2,
+	ZZ_4_byte = 0,
+	ZZ_8_byte = 3
+};
+
+/*
+ * AA is mostly about address write back mode. It determines if the
+ * address in question should be updated before usage or after:
+ *   addr += offset; data = *addr;
+ *   data = *addr; addr += offset;
+ *
+ * In "scaling" mode, the effective address will become the sum
+ * of "address" + "index"*"size". The "size" is specified by the
+ * "ZZ" field. There is no write back when AA is set for scaling:
+ *   data = *(addr + offset<<zz)
+ */
+enum {
+	AA_none  = 0,
+	AA_pre   = 1,	/* in assembly known as "a/aw". */
+	AA_post  = 2,	/* in assembly known as "ab". */
+	AA_scale = 3	/* in assembly known as "as". */
+};
+
+/* X flag determines the mode of extension. */
+enum {
+	X_zero = 0,
+	X_sign = 1
+};
+
+/* Condition codes. */
+enum {
+	CC_always     = 0,	/* condition is true all the time */
+	CC_equal      = 1,	/* if status32.z flag is set */
+	CC_unequal    = 2,	/* if status32.z flag is clear */
+	CC_positive   = 3,	/* if status32.n flag is clear */
+	CC_negative   = 4,	/* if status32.n flag is set */
+	CC_less_u     = 5,	/* less than (unsigned) */
+	CC_less_eq_u  = 14,	/* less than or equal (unsigned) */
+	CC_great_eq_u = 6,	/* greater than or equal (unsigned) */
+	CC_great_u    = 13,	/* greater than (unsigned) */
+	CC_less_s     = 11,	/* less than (signed) */
+	CC_less_eq_s  = 12,	/* less than or equal (signed) */
+	CC_great_eq_s = 10,	/* greater than or equal (signed) */
+	CC_great_s    = 9	/* greater than (signed) */
+};
+
+#define IN_U6_RANGE(x)	((x) <= (0x40      - 1) && (x) >= 0)
+#define IN_S9_RANGE(x)	((x) <= (0x100     - 1) && (x) >= -0x100)
+#define IN_S12_RANGE(x)	((x) <= (0x800     - 1) && (x) >= -0x800)
+#define IN_S21_RANGE(x)	((x) <= (0x100000  - 1) && (x) >= -0x100000)
+#define IN_S25_RANGE(x)	((x) <= (0x1000000 - 1) && (x) >= -0x1000000)
+
+/* Operands in most of the encodings. */
+#define OP_A(x)	((x) & 0x03f)
+#define OP_B(x)	((((x) & 0x07) << 24) | (((x) & 0x38) <<  9))
+#define OP_C(x)	(((x) & 0x03f) << 6)
+#define OP_IMM	(OP_C(ARC_R_IMM))
+#define COND(x)	(OP_A((x) & 31))
+#define FLAG(x)	(((x) & 1) << 15)
+
+/*
+ * The 4-byte encoding of "mov b,c":
+ *
+ * 0010_0bbb 0000_1010 0BBB_cccc cc00_0000
+ *
+ * b:  BBBbbb		destination register
+ * c:  cccccc		source register
+ */
+#define OPC_MOV		0x200a0000
+
+/*
+ * The 4-byte encoding of "mov b,s12" (used for moving small immediates):
+ *
+ * 0010_0bbb 1000_1010 0BBB_ssss ssSS_SSSS
+ *
+ * b:  BBBbbb		destination register
+ * s:  SSSSSSssssss	source immediate (signed)
+ */
+#define OPC_MOVI	0x208a0000
+#define MOVI_S12(x)	((((x) & 0xfc0) >> 6) | (((x) & 0x3f) << 6))
+
+/*
+ * The 4-byte encoding of "mov[.qq] b,u6", used for conditional
+ * moving of even smaller immediates:
+ *
+ * 0010_0bbb 1100_1010 0BBB_cccc cciq_qqqq
+ *
+ * qq: qqqqq		condition code
+ * i:			If set, c is considered a 6-bit immediate, else a reg.
+ *
+ * b:  BBBbbb		destination register
+ * c:  cccccc		source
+ */
+#define OPC_MOV_CC	0x20ca0000
+#define MOV_CC_I	BIT(5)
+#define OPC_MOVU_CC	(OPC_MOV_CC | MOV_CC_I)
+
+/*
+ * The 4-byte encoding of "sexb b,c" (8-bit sign extension):
+ *
+ * 0010_0bbb 0010_1111 0BBB_cccc cc00_0101
+ *
+ * b:  BBBbbb		destination register
+ * c:  cccccc		source register
+ */
+#define OPC_SEXB	0x202f0005
+
+/*
+ * The 4-byte encoding of "sexh b,c" (16-bit sign extension):
+ *
+ * 0010_0bbb 0010_1111 0BBB_cccc cc00_0110
+ *
+ * b:  BBBbbb		destination register
+ * c:  cccccc		source register
+ */
+#define OPC_SEXH	0x202f0006
+
+/*
+ * The 4-byte encoding of "ld[zz][.x][.aa] c,[b,s9]":
+ *
+ * 0001_0bbb ssss_ssss SBBB_0aaz zxcc_cccc
+ *
+ * zz:			size mode
+ * aa:			address write back mode
+ * x:			extension mode
+ *
+ * s9: S_ssss_ssss	9-bit signed number
+ * b:  BBBbbb		source reg for address
+ * c:  cccccc		destination register
+ */
+#define OPC_LOAD	0x10000000
+#define LOAD_X(x)	((x) << 6)
+#define LOAD_ZZ(x)	((x) << 7)
+#define LOAD_AA(x)	((x) << 9)
+#define LOAD_S9(x)	((((x) & 0x0ff) << 16) | (((x) & 0x100) <<  7))
+#define LOAD_C(x)	((x) & 0x03f)
+/* Unsigned and signed loads. */
+#define OPC_LDU		(OPC_LOAD | LOAD_X(X_zero))
+#define OPC_LDS		(OPC_LOAD | LOAD_X(X_sign))
+/* 32-bit load. */
+#define OPC_LD32	(OPC_LDU | LOAD_ZZ(ZZ_4_byte))
+/* "pop reg" is merely a "ld.ab reg,[sp,4]". */
+#define OPC_POP		\
+	(OPC_LD32 | LOAD_AA(AA_post) | LOAD_S9(4) | OP_B(ARC_R_SP))
+
+/*
+ * The 4-byte encoding of "st[zz][.aa] c,[b,s9]":
+ *
+ * 0001_1bbb ssss_ssss SBBB_cccc cc0a_azz0
+ *
+ * zz: zz		size mode
+ * aa: aa		address write back mode
+ *
+ * s9: S_ssss_ssss	9-bit signed number
+ * b:  BBBbbb		source reg for address
+ * c:  cccccc		source reg to be stored
+ */
+#define OPC_STORE	0x18000000
+#define STORE_ZZ(x)	((x) << 1)
+#define STORE_AA(x)	((x) << 3)
+#define STORE_S9(x)	((((x) & 0x0ff) << 16) | (((x) & 0x100) <<  7))
+/* 32-bit store. */
+#define OPC_ST32	(OPC_STORE | STORE_ZZ(ZZ_4_byte))
+/* "push reg" is merely a "st.aw reg,[sp,-4]". */
+#define OPC_PUSH	\
+	(OPC_ST32 | STORE_AA(AA_pre) | STORE_S9(-4) | OP_B(ARC_R_SP))
+
+/*
+ * The 4-byte encoding of "add a,b,c":
+ *
+ * 0010_0bbb 0i00_0000 fBBB_cccc ccaa_aaaa
+ *
+ * f:                   indicates if flags (carry, etc.) should be updated
+ * i:			If set, c is considered a 6-bit immediate, else a reg.
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_ADD		0x20000000
+/* Addition with updating the pertinent flags in "status32" register. */
+#define OPC_ADDF	(OPC_ADD | FLAG(1))
+#define ADDI		BIT(22)
+#define ADDI_U6(x)	OP_C(x)
+#define OPC_ADDI	(OPC_ADD | ADDI)
+#define OPC_ADDIF	(OPC_ADDI | FLAG(1))
+#define OPC_ADD_I	(OPC_ADD | OP_IMM)
+
+/*
+ * The 4-byte encoding of "adc a,b,c" (addition with carry):
+ *
+ * 0010_0bbb 0i00_0001 0BBB_cccc ccaa_aaaa
+ *
+ * i:			if set, c is considered a 6-bit immediate, else a reg.
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_ADC		0x20010000
+#define ADCI		BIT(22)
+#define ADCI_U6(x)	OP_C(x)
+#define OPC_ADCI	(OPC_ADC | ADCI)
+
+/*
+ * The 4-byte encoding of "sub a,b,c":
+ *
+ * 0010_0bbb 0i00_0010 fBBB_cccc ccaa_aaaa
+ *
+ * f:                   indicates if flags (carry, etc.) should be updated
+ * i:			if set, c is considered a 6-bit immediate, else a reg.
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_SUB		0x20020000
+/* Subtraction with updating the pertinent flags in "status32" register. */
+#define OPC_SUBF	(OPC_SUB | FLAG(1))
+#define SUBI		BIT(22)
+#define SUBI_U6(x)	OP_C(x)
+#define OPC_SUBI	(OPC_SUB | SUBI)
+#define OPC_SUB_I	(OPC_SUB | OP_IMM)
+
+/*
+ * The 4-byte encoding of "sbc a,b,c" (subtraction with carry):
+ *
+ * 0010_0bbb 0000_0011 fBBB_cccc ccaa_aaaa
+ *
+ * f:                   indicates if flags (carry, etc.) should be updated
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_SBC		0x20030000
+
+/*
+ * The 4-byte encoding of "cmp[.qq] b,c":
+ *
+ * 0010_0bbb 1100_1100 1BBB_cccc cc0q_qqqq
+ *
+ * qq:	qqqqq		condition code
+ *
+ * b:  BBBbbb		the 1st operand
+ * c:  cccccc		the 2nd operand
+ */
+#define OPC_CMP		0x20cc8000
+
+/*
+ * The 4-byte encoding of "neg a,b":
+ *
+ * 0010_0bbb 0100_1110 0BBB_0000 00aa_aaaa
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		input
+ */
+#define OPC_NEG		0x204e0000
+
+/*
+ * The 4-byte encoding of "mpy a,b,c".
+ * mpy is the signed 32-bit multiplication with the lower 32-bit
+ * of the product as the result.
+ *
+ * 0010_0bbb 0001_1010 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_MPY		0x201a0000
+#define OPC_MPYI	(OPC_MPY | OP_IMM)
+
+/*
+ * The 4-byte encoding of "mpydu a,b,c".
+ * mpydu is the unsigned 32-bit multiplication with the lower 32-bit of
+ * the product in register "a" and the higher 32-bit in register "a+1".
+ *
+ * 0010_1bbb 0001_1001 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		64-bit result in registers (R_a+1,R_a)
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_MPYDU	0x28190000
+#define OPC_MPYDUI	(OPC_MPYDU | OP_IMM)
+
+/*
+ * The 4-byte encoding of "divu a,b,c" (unsigned division):
+ *
+ * 0010_1bbb 0000_0101 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result (quotient)
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand (divisor)
+ */
+#define OPC_DIVU	0x28050000
+#define OPC_DIVUI	(OPC_DIVU | OP_IMM)
+
+/*
+ * The 4-byte encoding of "div a,b,c" (signed division):
+ *
+ * 0010_1bbb 0000_0100 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result (quotient)
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand (divisor)
+ */
+#define OPC_DIVS	0x28040000
+#define OPC_DIVSI	(OPC_DIVS | OP_IMM)
+
+/*
+ * The 4-byte encoding of "remu a,b,c" (unsigned remainder):
+ *
+ * 0010_1bbb 0000_1001 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result (remainder)
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand (divisor)
+ */
+#define OPC_REMU	0x28090000
+#define OPC_REMUI	(OPC_REMU | OP_IMM)
+
+/*
+ * The 4-byte encoding of "rem a,b,c" (signed remainder):
+ *
+ * 0010_1bbb 0000_1000 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result (remainder)
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand (divisor)
+ */
+#define OPC_REMS	0x28080000
+#define OPC_REMSI	(OPC_REMS | OP_IMM)
+
+/*
+ * The 4-byte encoding of "and a,b,c":
+ *
+ * 0010_0bbb 0000_0100 fBBB_cccc ccaa_aaaa
+ *
+ * f:                   indicates if zero and negative flags should be updated
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_AND		0x20040000
+#define OPC_ANDI	(OPC_AND | OP_IMM)
+
+/*
+ * The 4-byte encoding of "tst[.qq] b,c".
+ * Checks if the two input operands have any bit set at the same
+ * position.
+ *
+ * 0010_0bbb 1100_1011 1BBB_cccc cc0q_qqqq
+ *
+ * qq:	qqqqq		condition code
+ *
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_TST		0x20cb8000
+
+/*
+ * The 4-byte encoding of "or a,b,c":
+ *
+ * 0010_0bbb 0000_0101 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_OR		0x20050000
+#define OPC_ORI		(OPC_OR | OP_IMM)
+
+/*
+ * The 4-byte encoding of "xor a,b,c":
+ *
+ * 0010_0bbb 0000_0111 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_XOR		0x20070000
+#define OPC_XORI	(OPC_XOR | OP_IMM)
+
+/*
+ * The 4-byte encoding of "not b,c":
+ *
+ * 0010_0bbb 0010_1111 0BBB_cccc cc00_1010
+ *
+ * b:  BBBbbb		result
+ * c:  cccccc		input
+ */
+#define OPC_NOT		0x202f000a
+
+/*
+ * The 4-byte encoding of "btst b,u6":
+ *
+ * 0010_0bbb 0101_0001 1BBB_uuuu uu00_0000
+ *
+ * b:  BBBbbb		input number to check
+ * u6: uuuuuu		6-bit unsigned number specifying bit position to check
+ */
+#define OPC_BTSTU6	0x20518000
+#define BTST_U6(x)	(OP_C((x) & 63))
+
+/*
+ * The 4-byte encoding of "asl[.qq] b,b,c" (arithmetic shift left):
+ *
+ * 0010_1bbb 0i00_0000 0BBB_cccc ccaa_aaaa
+ *
+ * i:			if set, c is considered a 5-bit immediate, else a reg.
+ *
+ * b:  BBBbbb		result and the first operand (number to be shifted)
+ * c:  cccccc		amount to be shifted
+ */
+#define OPC_ASL		0x28000000
+#define ASL_I		BIT(22)
+#define ASLI_U6(x)	OP_C((x) & 31)
+#define OPC_ASLI	(OPC_ASL | ASL_I)
+
+/*
+ * The 4-byte encoding of "asr a,b,c" (arithmetic shift right):
+ *
+ * 0010_1bbb 0i00_0010 0BBB_cccc ccaa_aaaa
+ *
+ * i:			if set, c is considered a 6-bit immediate, else a reg.
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		first input:  number to be shifted
+ * c:  cccccc		second input: amount to be shifted
+ */
+#define OPC_ASR		0x28020000
+#define ASR_I		ASL_I
+#define ASRI_U6(x)	ASLI_U6(x)
+#define OPC_ASRI	(OPC_ASR | ASR_I)
+
+/*
+ * The 4-byte encoding of "lsr a,b,c" (logical shift right):
+ *
+ * 0010_1bbb 0i00_0001 0BBB_cccc ccaa_aaaa
+ *
+ * i:			if set, c is considered a 6-bit immediate, else a reg.
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		first input:  number to be shifted
+ * c:  cccccc		second input: amount to be shifted
+ */
+#define OPC_LSR		0x28010000
+#define LSR_I		ASL_I
+#define LSRI_U6(x)	ASLI_U6(x)
+#define OPC_LSRI	(OPC_LSR | LSR_I)
+
+/*
+ * The 4-byte encoding of "swape b,c":
+ *
+ * 0010_1bbb 0010_1111 0bbb_cccc cc00_1001
+ *
+ * b:  BBBbbb		destination register
+ * c:  cccccc		source register
+ */
+#define OPC_SWAPE	0x282f0009
+
+/*
+ * Encoding for jump to an address in register:
+ * j reg_c
+ *
+ * 0010_0000 1110_0000 0000_cccc cc00_0000
+ *
+ * c:  cccccc		register holding the destination address
+ */
+#define OPC_JMP		0x20e00000
+/* Jump to "branch-and-link" register, which effectively is a "return". */
+#define OPC_J_BLINK	(OPC_JMP | OP_C(ARC_R_BLINK))
+
+/*
+ * Encoding for jump-and-link to an address in register:
+ * jl reg_c
+ *
+ * 0010_0000 0010_0010 0000_cccc cc00_0000
+ *
+ * c:  cccccc		register holding the destination address
+ */
+#define OPC_JL		0x20220000
+
+/*
+ * Encoding for (conditional) branch to an offset from the current location
+ * that is word aligned: (PC & 0xffff_fffc) + s21
+ * B[qq] s21
+ *
+ * 0000_0sss ssss_sss0 SSSS_SSSS SS0q_qqqq
+ *
+ * qq:	qqqqq				condition code
+ * s21:	SSSS SSSS_SSss ssss_ssss	The displacement (21-bit signed)
+ *
+ * The displacement is supposed to be 16-bit (2-byte) aligned. Therefore,
+ * it should be a multiple of 2. Hence, there is an implied '0' bit at its
+ * LSB: S_SSSS SSSS_Ssss ssss_sss0
+ */
+#define OPC_BCC		0x00000000
+#define BCC_S21(d)	((((d) & 0x7fe) << 16) | (((d) & 0x1ff800) >> 5))
+
+/*
+ * Encoding for unconditional branch to an offset from the current location
+ * that is word aligned: (PC & 0xffff_fffc) + s25
+ * B s25
+ *
+ * 0000_0sss ssss_sss1 SSSS_SSSS SS00_TTTT
+ *
+ * s25:	TTTT SSSS SSSS_SSss ssss_ssss	The displacement (25-bit signed)
+ *
+ * The displacement is supposed to be 16-bit (2-byte) aligned. Therefore,
+ * it should be a multiple of 2. Hence, there is an implied '0' bit at its
+ * LSB: T TTTS_SSSS SSSS_Ssss ssss_sss0
+ */
+#define OPC_B		0x00010000
+#define B_S25(d)	((((d) & 0x1e00000) >> 21) | BCC_S21(d))
+
+static inline void emit_2_bytes(u8 *buf, u16 bytes)
+{
+	*((u16 *)buf) = bytes;
+}
+
+static inline void emit_4_bytes(u8 *buf, u32 bytes)
+{
+	emit_2_bytes(buf, bytes >> 16);
+	emit_2_bytes(buf + 2, bytes & 0xffff);
+}
+
+static inline u8 bpf_to_arc_size(u8 size)
+{
+	switch (size) {
+	case BPF_B:
+		return ZZ_1_byte;
+	case BPF_H:
+		return ZZ_2_byte;
+	case BPF_W:
+		return ZZ_4_byte;
+	case BPF_DW:
+		return ZZ_8_byte;
+	default:
+		return ZZ_4_byte;
+	}
+}
+
+/************** Encoders (Deal with ARC regs) ************/
+
+/* Move an immediate to register with a 4-byte instruction. */
+static u8 arc_movi_r(u8 *buf, u8 reg, s16 imm)
+{
+	const u32 insn = OPC_MOVI | OP_B(reg) | MOVI_S12(imm);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* rd <- rs */
+static u8 arc_mov_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_MOV | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* The emitted code may have different sizes based on "imm". */
+static u8 arc_mov_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_MOV | OP_B(rd) | OP_IMM;
+
+	if (IN_S12_RANGE(imm))
+		return arc_movi_r(buf, rd, imm);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* The emitted code will always have the same size (8). */
+static u8 arc_mov_i_fixed(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_MOV | OP_B(rd) | OP_IMM;
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* Conditional move. */
+static u8 arc_mov_cc_r(u8 *buf, u8 cc, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_MOV_CC | OP_B(rd) | OP_C(rs) | COND(cc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* Conditional move of a small immediate to rd. */
+static u8 arc_movu_cc_r(u8 *buf, u8 cc, u8 rd, u8 imm)
+{
+	const u32 insn = OPC_MOVU_CC | OP_B(rd) | OP_C(imm) | COND(cc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* Sign extension from a byte. */
+static u8 arc_sexb_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_SEXB | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* Sign extension from two bytes. */
+static u8 arc_sexh_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_SEXH | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* st reg, [reg_mem, off] */
+static u8 arc_st_r(u8 *buf, u8 reg, u8 reg_mem, s16 off, u8 zz)
+{
+	const u32 insn = OPC_STORE | STORE_ZZ(zz) | OP_C(reg) |
+		OP_B(reg_mem) | STORE_S9(off);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* st.aw reg, [sp, -4] */
+static u8 arc_push_r(u8 *buf, u8 reg)
+{
+	const u32 insn = OPC_PUSH | OP_C(reg);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* ld reg, [reg_mem, off] (unsigned) */
+static u8 arc_ld_r(u8 *buf, u8 reg, u8 reg_mem, s16 off, u8 zz)
+{
+	const u32 insn = OPC_LDU | LOAD_ZZ(zz) | LOAD_C(reg) |
+		OP_B(reg_mem) | LOAD_S9(off);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* ld.x reg, [reg_mem, off] (sign extend) */
+static u8 arc_ldx_r(u8 *buf, u8 reg, u8 reg_mem, s16 off, u8 zz)
+{
+	const u32 insn = OPC_LDS | LOAD_ZZ(zz) | LOAD_C(reg) |
+		OP_B(reg_mem) | LOAD_S9(off);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* ld.ab reg,[sp,4] */
+static u8 arc_pop_r(u8 *buf, u8 reg)
+{
+	const u32 insn = OPC_POP | LOAD_C(reg);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* add Ra,Ra,Rc */
+static u8 arc_add_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_ADD | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* add.f Ra,Ra,Rc */
+static u8 arc_addf_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_ADDF | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* add.f Ra,Ra,u6 */
+static u8 arc_addif_r(u8 *buf, u8 ra, u8 u6)
+{
+	const u32 insn = OPC_ADDIF | OP_A(ra) | OP_B(ra) | ADDI_U6(u6);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* add Ra,Ra,u6 */
+static u8 arc_addi_r(u8 *buf, u8 ra, u8 u6)
+{
+	const u32 insn = OPC_ADDI | OP_A(ra) | OP_B(ra) | ADDI_U6(u6);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* add Ra,Rb,imm */
+static u8 arc_add_i(u8 *buf, u8 ra, u8 rb, s32 imm)
+{
+	const u32 insn = OPC_ADD_I | OP_A(ra) | OP_B(rb);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* adc Ra,Ra,Rc */
+static u8 arc_adc_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_ADC | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* adc Ra,Ra,u6 */
+static u8 arc_adci_r(u8 *buf, u8 ra, u8 u6)
+{
+	const u32 insn = OPC_ADCI | OP_A(ra) | OP_B(ra) | ADCI_U6(u6);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* sub Ra,Ra,Rc */
+static u8 arc_sub_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_SUB | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* sub.f Ra,Ra,Rc */
+static u8 arc_subf_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_SUBF | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* sub Ra,Ra,u6 */
+static u8 arc_subi_r(u8 *buf, u8 ra, u8 u6)
+{
+	const u32 insn = OPC_SUBI | OP_A(ra) | OP_B(ra) | SUBI_U6(u6);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* sub Ra,Ra,imm */
+static u8 arc_sub_i(u8 *buf, u8 ra, s32 imm)
+{
+	const u32 insn = OPC_SUB_I | OP_A(ra) | OP_B(ra);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* sbc Ra,Ra,Rc */
+static u8 arc_sbc_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_SBC | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* cmp Rb,Rc */
+static u8 arc_cmp_r(u8 *buf, u8 rb, u8 rc)
+{
+	const u32 insn = OPC_CMP | OP_B(rb) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/*
+ * cmp.z Rb,Rc
+ *
+ * This "cmp.z" variant of compare instruction is used on lower
+ * 32-bits of register pairs after "cmp"ing their upper parts. If the
+ * upper parts are equal (z), then this one will proceed to check the
+ * rest.
+ */
+static u8 arc_cmpz_r(u8 *buf, u8 rb, u8 rc)
+{
+	const u32 insn = OPC_CMP | OP_B(rb) | OP_C(rc) | CC_equal;
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* neg Ra,Rb */
+static u8 arc_neg_r(u8 *buf, u8 ra, u8 rb)
+{
+	const u32 insn = OPC_NEG | OP_A(ra) | OP_B(rb);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* mpy Ra,Rb,Rc */
+static u8 arc_mpy_r(u8 *buf, u8 ra, u8 rb, u8 rc)
+{
+	const u32 insn = OPC_MPY | OP_A(ra) | OP_B(rb) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* mpy Ra,Rb,imm */
+static u8 arc_mpy_i(u8 *buf, u8 ra, u8 rb, s32 imm)
+{
+	const u32 insn = OPC_MPYI | OP_A(ra) | OP_B(rb);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* mpydu Ra,Ra,Rc */
+static u8 arc_mpydu_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_MPYDU | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* mpydu Ra,Ra,imm */
+static u8 arc_mpydu_i(u8 *buf, u8 ra, s32 imm)
+{
+	const u32 insn = OPC_MPYDUI | OP_A(ra) | OP_B(ra);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* divu Rd,Rd,Rs */
+static u8 arc_divu_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_DIVU | OP_A(rd) | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* divu Rd,Rd,imm */
+static u8 arc_divu_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_DIVUI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* div Rd,Rd,Rs */
+static u8 arc_divs_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_DIVS | OP_A(rd) | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* div Rd,Rd,imm */
+static u8 arc_divs_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_DIVSI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* remu Rd,Rd,Rs */
+static u8 arc_remu_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_REMU | OP_A(rd) | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* remu Rd,Rd,imm */
+static u8 arc_remu_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_REMUI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* rem Rd,Rd,Rs */
+static u8 arc_rems_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_REMS | OP_A(rd) | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* rem Rd,Rd,imm */
+static u8 arc_rems_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_REMSI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* and Rd,Rd,Rs */
+static u8 arc_and_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_AND | OP_A(rd) | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* and Rd,Rd,limm */
+static u8 arc_and_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_ANDI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* tst Rd,Rs */
+static u8 arc_tst_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_TST | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/*
+ * This particular version, "tst.z ...", is meant to be used after a
+ * "tst" on the low 32-bit of register pairs. If that "tst" is not
+ * zero, then we don't need to test the upper 32-bits lest it sets
+ * the zero flag.
+ */
+static u8 arc_tstz_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_TST | OP_B(rd) | OP_C(rs) | CC_equal;
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_or_r(u8 *buf, u8 rd, u8 rs1, u8 rs2)
+{
+	const u32 insn = OPC_OR | OP_A(rd) | OP_B(rs1) | OP_C(rs2);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_or_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_ORI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+static u8 arc_xor_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_XOR | OP_A(rd) | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_xor_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_XORI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+static u8 arc_not_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_NOT | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_btst_i(u8 *buf, u8 rs, u8 imm)
+{
+	const u32 insn = OPC_BTSTU6 | OP_B(rs) | BTST_U6(imm);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_asl_r(u8 *buf, u8 rd, u8 rs1, u8 rs2)
+{
+	const u32 insn = OPC_ASL | OP_A(rd) | OP_B(rs1) | OP_C(rs2);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_asli_r(u8 *buf, u8 rd, u8 rs, u8 imm)
+{
+	const u32 insn = OPC_ASLI | OP_A(rd) | OP_B(rs) | ASLI_U6(imm);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_asr_r(u8 *buf, u8 rd, u8 rs1, u8 rs2)
+{
+	const u32 insn = OPC_ASR | OP_A(rd) | OP_B(rs1) | OP_C(rs2);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_asri_r(u8 *buf, u8 rd, u8 rs, u8 imm)
+{
+	const u32 insn = OPC_ASRI | OP_A(rd) | OP_B(rs) | ASRI_U6(imm);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_lsr_r(u8 *buf, u8 rd, u8 rs1, u8 rs2)
+{
+	const u32 insn = OPC_LSR | OP_A(rd) | OP_B(rs1) | OP_C(rs2);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_lsri_r(u8 *buf, u8 rd, u8 rs, u8 imm)
+{
+	const u32 insn = OPC_LSRI | OP_A(rd) | OP_B(rs) | LSRI_U6(imm);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_swape_r(u8 *buf, u8 r)
+{
+	const u32 insn = OPC_SWAPE | OP_B(r) | OP_C(r);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_jmp_return(u8 *buf)
+{
+	if (buf)
+		emit_4_bytes(buf, OPC_J_BLINK);
+	return INSN_len_normal;
+}
+
+static u8 arc_jl(u8 *buf, u8 reg)
+{
+	const u32 insn = OPC_JL | OP_C(reg);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/*
+ * Conditional jump to an address that is max 21 bits away (signed).
+ *
+ * b<cc> s21
+ */
+static u8 arc_bcc(u8 *buf, u8 cc, int offset)
+{
+	const u32 insn = OPC_BCC | BCC_S21(offset) | COND(cc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/*
+ * Unconditional jump to an address that is max 25 bits away (signed).
+ *
+ * b     s25
+ */
+static u8 arc_b(u8 *buf, s32 offset)
+{
+	const u32 insn = OPC_B | B_S25(offset);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/************* Packers (Deal with BPF_REGs) **************/
+
+u8 zext(u8 *buf, u8 rd)
+{
+	if (rd != BPF_REG_FP)
+		return arc_movi_r(buf, REG_HI(rd), 0);
+	else
+		return 0;
+}
+
+u8 mov_r32(u8 *buf, u8 rd, u8 rs, u8 sign_ext)
+{
+	u8 len = 0;
+
+	if (sign_ext) {
+		if (sign_ext == 8)
+			len = arc_sexb_r(buf, REG_LO(rd), REG_LO(rs));
+		else if (sign_ext == 16)
+			len = arc_sexh_r(buf, REG_LO(rd), REG_LO(rs));
+		else if (sign_ext == 32 && rd != rs)
+			len = arc_mov_r(buf, REG_LO(rd), REG_LO(rs));
+
+		return len;
+	}
+
+	/* Unsigned move. */
+
+	if (rd != rs)
+		len = arc_mov_r(buf, REG_LO(rd), REG_LO(rs));
+
+	return len;
+}
+
+u8 mov_r32_i32(u8 *buf, u8 reg, s32 imm)
+{
+	return arc_mov_i(buf, REG_LO(reg), imm);
+}
+
+u8 mov_r64(u8 *buf, u8 rd, u8 rs, u8 sign_ext)
+{
+	u8 len = 0;
+
+	if (sign_ext) {
+		/* First handle the low 32-bit part. */
+		len = mov_r32(buf, rd, rs, sign_ext);
+
+		/* Now propagate the sign bit of LO to HI. */
+		if (sign_ext == 8 || sign_ext == 16 || sign_ext == 32) {
+			len += arc_asri_r(BUF(buf, len),
+					  REG_HI(rd), REG_LO(rd), 31);
+		}
+
+		return len;
+	}
+
+	/* Unsigned move. */
+
+	if (rd == rs)
+		return 0;
+
+	len = arc_mov_r(buf, REG_LO(rd), REG_LO(rs));
+
+	if (rs != BPF_REG_FP)
+		len += arc_mov_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	/* BPF_REG_FP is mapped to 32-bit "fp" register. */
+	else
+		len += arc_movi_r(BUF(buf, len), REG_HI(rd), 0);
+
+	return len;
+}
+
+/* Sign extend the 32-bit immediate into 64-bit register pair. */
+u8 mov_r64_i32(u8 *buf, u8 reg, s32 imm)
+{
+	u8 len = 0;
+
+	len = arc_mov_i(buf, REG_LO(reg), imm);
+
+	/* BPF_REG_FP is mapped to 32-bit "fp" register. */
+	if (reg != BPF_REG_FP) {
+		if (imm >= 0)
+			len += arc_movi_r(BUF(buf, len), REG_HI(reg), 0);
+		else
+			len += arc_movi_r(BUF(buf, len), REG_HI(reg), -1);
+	}
+
+	return len;
+}
+
+/*
+ * This is merely used for translation of "LD R, IMM64" instructions
+ * of the BPF. These sort of instructions are sometimes used for
+ * relocations. If during the normal pass, the relocation value is
+ * not known, the BPF instruction may look something like:
+ *
+ * LD R <- 0x0000_0001_0000_0001
+ *
+ * Which will nicely translate to two 4-byte ARC instructions:
+ *
+ * mov R_lo, 1               # imm is small enough to be s12
+ * mov R_hi, 1               # same
+ *
+ * However, during the extra pass, the IMM64 will have changed
+ * to the resolved address and looks something like:
+ *
+ * LD R <- 0x0000_0000_1234_5678
+ *
+ * Now, the translated code will require 12 bytes:
+ *
+ * mov R_lo, 0x12345678      # this is an 8-byte instruction
+ * mov R_hi, 0               # still 4 bytes
+ *
+ * Which in practice will result in overwriting the following
+ * instruction. To avoid such cases, we will always emit codes
+ * with fixed sizes.
+ */
+u8 mov_r64_i64(u8 *buf, u8 reg, u32 lo, u32 hi)
+{
+	u8 len;
+
+	len  = arc_mov_i_fixed(buf, REG_LO(reg), lo);
+	len += arc_mov_i_fixed(BUF(buf, len), REG_HI(reg), hi);
+
+	return len;
+}
+
+/*
+ * If the "off"set is too big (doesn't encode as S9) for:
+ *
+ *   {ld,st}  r, [rm, off]
+ *
+ * Then emit:
+ *
+ *   add r10, REG_LO(rm), off
+ *
+ * and make sure that r10 becomes the effective address:
+ *
+ *   {ld,st}  r, [r10, 0]
+ */
+static u8 adjust_mem_access(u8 *buf, s16 *off, u8 size,
+			    u8 rm, u8 *arc_reg_mem)
+{
+	u8 len = 0;
+	*arc_reg_mem = REG_LO(rm);
+
+	if (!IN_S9_RANGE(*off) ||
+	    (size == BPF_DW && !IN_S9_RANGE(*off + 4))) {
+		len += arc_add_i(BUF(buf, len),
+				 REG_LO(JIT_REG_TMP), REG_LO(rm), (u32)(*off));
+		*arc_reg_mem = REG_LO(JIT_REG_TMP);
+		*off = 0;
+	}
+
+	return len;
+}
+
+/* store rs, [rd, off] */
+u8 store_r(u8 *buf, u8 rs, u8 rd, s16 off, u8 size)
+{
+	u8 len, arc_reg_mem;
+
+	len = adjust_mem_access(buf, &off, size, rd, &arc_reg_mem);
+
+	if (size == BPF_DW) {
+		len += arc_st_r(BUF(buf, len), REG_LO(rs), arc_reg_mem,
+				off, ZZ_4_byte);
+		len += arc_st_r(BUF(buf, len), REG_HI(rs), arc_reg_mem,
+				off + 4, ZZ_4_byte);
+	} else {
+		u8 zz = bpf_to_arc_size(size);
+
+		len += arc_st_r(BUF(buf, len), REG_LO(rs), arc_reg_mem,
+				off, zz);
+	}
+
+	return len;
+}
+
+/*
+ * For {8,16,32}-bit stores:
+ *   mov r21, imm
+ *   st  r21, [...]
+ * For 64-bit stores:
+ *   mov r21, imm
+ *   st  r21, [...]
+ *   mov r21, {0,-1}
+ *   st  r21, [...+4]
+ */
+u8 store_i(u8 *buf, s32 imm, u8 rd, s16 off, u8 size)
+{
+	u8 len, arc_reg_mem;
+	/* REG_LO(JIT_REG_TMP) might be used by "adjust_mem_access()". */
+	const u8 arc_rs = REG_HI(JIT_REG_TMP);
+
+	len = adjust_mem_access(buf, &off, size, rd, &arc_reg_mem);
+
+	if (size == BPF_DW) {
+		len += arc_mov_i(BUF(buf, len), arc_rs, imm);
+		len += arc_st_r(BUF(buf, len), arc_rs, arc_reg_mem,
+				off, ZZ_4_byte);
+		imm = (imm >= 0 ? 0 : -1);
+		len += arc_mov_i(BUF(buf, len), arc_rs, imm);
+		len += arc_st_r(BUF(buf, len), arc_rs, arc_reg_mem,
+				off + 4, ZZ_4_byte);
+	} else {
+		u8 zz = bpf_to_arc_size(size);
+
+		len += arc_mov_i(BUF(buf, len), arc_rs, imm);
+		len += arc_st_r(BUF(buf, len), arc_rs, arc_reg_mem, off, zz);
+	}
+
+	return len;
+}
+
+/*
+ * For the calling convention of a little endian machine, the LO part
+ * must be on top of the stack.
+ */
+static u8 push_r64(u8 *buf, u8 reg)
+{
+	u8 len = 0;
+
+#ifdef __LITTLE_ENDIAN
+	/* BPF_REG_FP is mapped to 32-bit "fp" register. */
+	if (reg != BPF_REG_FP)
+		len += arc_push_r(BUF(buf, len), REG_HI(reg));
+	len += arc_push_r(BUF(buf, len), REG_LO(reg));
+#else
+	len += arc_push_r(BUF(buf, len), REG_LO(reg));
+	if (reg != BPF_REG_FP)
+		len += arc_push_r(BUF(buf, len), REG_HI(reg));
+#endif
+
+	return len;
+}
+
+/* load rd, [rs, off] */
+u8 load_r(u8 *buf, u8 rd, u8 rs, s16 off, u8 size, bool sign_ext)
+{
+	u8 len, arc_reg_mem;
+
+	len = adjust_mem_access(buf, &off, size, rs, &arc_reg_mem);
+
+	if (size == BPF_B || size == BPF_H || size == BPF_W) {
+		const u8 zz = bpf_to_arc_size(size);
+
+		/* Use LD.X only if the data size is less than 32-bit. */
+		if (sign_ext && (zz == ZZ_1_byte || zz == ZZ_2_byte)) {
+			len += arc_ldx_r(BUF(buf, len), REG_LO(rd),
+					 arc_reg_mem, off, zz);
+		} else {
+			len += arc_ld_r(BUF(buf, len), REG_LO(rd),
+					arc_reg_mem, off, zz);
+		}
+
+		if (sign_ext) {
+			/* Propagate the sign bit to the higher reg. */
+			len += arc_asri_r(BUF(buf, len),
+					  REG_HI(rd), REG_LO(rd), 31);
+		} else {
+			len += arc_movi_r(BUF(buf, len), REG_HI(rd), 0);
+		}
+	} else if (size == BPF_DW) {
+		/*
+		 * We are about to issue 2 consecutive loads:
+		 *
+		 *   ld rx, [rb, off+0]
+		 *   ld ry, [rb, off+4]
+		 *
+		 * If "rx" and "rb" are the same registers, then the order
+		 * should change to guarantee that "rb" remains intact
+		 * during these 2 operations:
+		 *
+		 *   ld ry, [rb, off+4]
+		 *   ld rx, [rb, off+0]
+		 */
+		if (REG_LO(rd) != arc_reg_mem) {
+			len += arc_ld_r(BUF(buf, len), REG_LO(rd), arc_reg_mem,
+					off, ZZ_4_byte);
+			len += arc_ld_r(BUF(buf, len), REG_HI(rd), arc_reg_mem,
+					off + 4, ZZ_4_byte);
+		} else {
+			len += arc_ld_r(BUF(buf, len), REG_HI(rd), arc_reg_mem,
+					off + 4, ZZ_4_byte);
+			len += arc_ld_r(BUF(buf, len), REG_LO(rd), arc_reg_mem,
+					off, ZZ_4_byte);
+		}
+	}
+
+	return len;
+}
+
+u8 add_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_add_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 add_r32_i32(u8 *buf, u8 rd, s32 imm)
+{
+	if (IN_U6_RANGE(imm))
+		return arc_addi_r(buf, REG_LO(rd), imm);
+	else
+		return arc_add_i(buf, REG_LO(rd), REG_LO(rd), imm);
+}
+
+u8 add_r64(u8 *buf, u8 rd, u8 rs)
+{
+	u8 len;
+
+	len  = arc_addf_r(buf, REG_LO(rd), REG_LO(rs));
+	len += arc_adc_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	return len;
+}
+
+u8 add_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	u8 len;
+
+	if (IN_U6_RANGE(imm)) {
+		len  = arc_addif_r(buf, REG_LO(rd), imm);
+		len += arc_adci_r(BUF(buf, len), REG_HI(rd), 0);
+	} else {
+		len  = mov_r64_i32(buf, JIT_REG_TMP, imm);
+		len += add_r64(BUF(buf, len), rd, JIT_REG_TMP);
+	}
+	return len;
+}
+
+u8 sub_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_sub_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 sub_r32_i32(u8 *buf, u8 rd, s32 imm)
+{
+	if (IN_U6_RANGE(imm))
+		return arc_subi_r(buf, REG_LO(rd), imm);
+	else
+		return arc_sub_i(buf, REG_LO(rd), imm);
+}
+
+u8 sub_r64(u8 *buf, u8 rd, u8 rs)
+{
+	u8 len;
+
+	len  = arc_subf_r(buf, REG_LO(rd), REG_LO(rs));
+	len += arc_sbc_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	return len;
+}
+
+u8 sub_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	u8 len;
+
+	len  = mov_r64_i32(buf, JIT_REG_TMP, imm);
+	len += sub_r64(BUF(buf, len), rd, JIT_REG_TMP);
+	return len;
+}
+
+static u8 cmp_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_cmp_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 neg_r32(u8 *buf, u8 r)
+{
+	return arc_neg_r(buf, REG_LO(r), REG_LO(r));
+}
+
+/* In a two's complement system, -r is (~r + 1). */
+u8 neg_r64(u8 *buf, u8 r)
+{
+	u8 len;
+
+	len  = arc_not_r(buf, REG_LO(r), REG_LO(r));
+	len += arc_not_r(BUF(buf, len), REG_HI(r), REG_HI(r));
+	len += add_r64_i32(BUF(buf, len), r, 1);
+	return len;
+}
+
+u8 mul_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_mpy_r(buf, REG_LO(rd), REG_LO(rd), REG_LO(rs));
+}
+
+u8 mul_r32_i32(u8 *buf, u8 rd, s32 imm)
+{
+	return arc_mpy_i(buf, REG_LO(rd), REG_LO(rd), imm);
+}
+
+/*
+ * MUL B, C
+ * --------
+ * mpy       t0, B_hi, C_lo
+ * mpy       t1, B_lo, C_hi
+ * mpydu   B_lo, B_lo, C_lo
+ * add     B_hi, B_hi,   t0
+ * add     B_hi, B_hi,   t1
+ */
+u8 mul_r64(u8 *buf, u8 rd, u8 rs)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 t1   = REG_HI(JIT_REG_TMP);
+	const u8 C_lo = REG_LO(rs);
+	const u8 C_hi = REG_HI(rs);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	u8 len;
+
+	len  = arc_mpy_r(buf, t0, B_hi, C_lo);
+	len += arc_mpy_r(BUF(buf, len), t1, B_lo, C_hi);
+	len += arc_mpydu_r(BUF(buf, len), B_lo, C_lo);
+	len += arc_add_r(BUF(buf, len), B_hi, t0);
+	len += arc_add_r(BUF(buf, len), B_hi, t1);
+
+	return len;
+}
+
+/*
+ * MUL B, imm
+ * ----------
+ *
+ *  To get a 64-bit result from a signed 64x32 multiplication:
+ *
+ *         B_hi             B_lo   *
+ *         sign             imm
+ *  -----------------------------
+ *  HI(B_lo*imm)     LO(B_lo*imm)  +
+ *     B_hi*imm                    +
+ *     B_lo*sign
+ *  -----------------------------
+ *        res_hi           res_lo
+ *
+ * mpy     t1, B_lo, sign(imm)
+ * mpy     t0, B_hi, imm
+ * mpydu B_lo, B_lo, imm
+ * add   B_hi, B_hi,  t0
+ * add   B_hi, B_hi,  t1
+ *
+ * Note: We can't use signed double multiplication, "mpyd", instead of an
+ * unsigned version, "mpydu", and then get rid of the sign adjustments
+ * calculated in "t1". The signed multiplication, "mpyd", will consider
+ * both operands, "B_lo" and "imm", as signed inputs. However, for this
+ * 64x32 multiplication, "B_lo" must be treated as an unsigned number.
+ */
+u8 mul_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 t1   = REG_HI(JIT_REG_TMP);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	u8 len = 0;
+
+	if (imm == 1)
+		return 0;
+
+	/* Is the sign-extension of the immediate "-1"? */
+	if (imm < 0)
+		len += arc_neg_r(BUF(buf, len), t1, B_lo);
+
+	len += arc_mpy_i(BUF(buf, len), t0, B_hi, imm);
+	len += arc_mpydu_i(BUF(buf, len), B_lo, imm);
+	len += arc_add_r(BUF(buf, len), B_hi, t0);
+
+	/* Add the "sign*B_lo" part, if necessary. */
+	if (imm < 0)
+		len += arc_add_r(BUF(buf, len), B_hi, t1);
+
+	return len;
+}
+
+u8 div_r32(u8 *buf, u8 rd, u8 rs, bool sign_ext)
+{
+	if (sign_ext)
+		return arc_divs_r(buf, REG_LO(rd), REG_LO(rs));
+	else
+		return arc_divu_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 div_r32_i32(u8 *buf, u8 rd, s32 imm, bool sign_ext)
+{
+	if (imm == 0)
+		return 0;
+
+	if (sign_ext)
+		return arc_divs_i(buf, REG_LO(rd), imm);
+	else
+		return arc_divu_i(buf, REG_LO(rd), imm);
+}
+
+u8 mod_r32(u8 *buf, u8 rd, u8 rs, bool sign_ext)
+{
+	if (sign_ext)
+		return arc_rems_r(buf, REG_LO(rd), REG_LO(rs));
+	else
+		return arc_remu_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 mod_r32_i32(u8 *buf, u8 rd, s32 imm, bool sign_ext)
+{
+	if (imm == 0)
+		return 0;
+
+	if (sign_ext)
+		return arc_rems_i(buf, REG_LO(rd), imm);
+	else
+		return arc_remu_i(buf, REG_LO(rd), imm);
+}
+
+u8 and_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_and_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 and_r32_i32(u8 *buf, u8 rd, s32 imm)
+{
+	return arc_and_i(buf, REG_LO(rd), imm);
+}
+
+u8 and_r64(u8 *buf, u8 rd, u8 rs)
+{
+	u8 len;
+
+	len  = arc_and_r(buf, REG_LO(rd), REG_LO(rs));
+	len += arc_and_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	return len;
+}
+
+u8 and_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	u8 len;
+
+	len  = mov_r64_i32(buf, JIT_REG_TMP, imm);
+	len += and_r64(BUF(buf, len), rd, JIT_REG_TMP);
+	return len;
+}
+
+static u8 tst_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_tst_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 or_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_or_r(buf, REG_LO(rd), REG_LO(rd), REG_LO(rs));
+}
+
+u8 or_r32_i32(u8 *buf, u8 rd, s32 imm)
+{
+	return arc_or_i(buf, REG_LO(rd), imm);
+}
+
+u8 or_r64(u8 *buf, u8 rd, u8 rs)
+{
+	u8 len;
+
+	len  = arc_or_r(buf, REG_LO(rd), REG_LO(rd), REG_LO(rs));
+	len += arc_or_r(BUF(buf, len), REG_HI(rd), REG_HI(rd), REG_HI(rs));
+	return len;
+}
+
+u8 or_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	u8 len;
+
+	len  = mov_r64_i32(buf, JIT_REG_TMP, imm);
+	len += or_r64(BUF(buf, len), rd, JIT_REG_TMP);
+	return len;
+}
+
+u8 xor_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_xor_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 xor_r32_i32(u8 *buf, u8 rd, s32 imm)
+{
+	return arc_xor_i(buf, REG_LO(rd), imm);
+}
+
+u8 xor_r64(u8 *buf, u8 rd, u8 rs)
+{
+	u8 len;
+
+	len  = arc_xor_r(buf, REG_LO(rd), REG_LO(rs));
+	len += arc_xor_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	return len;
+}
+
+u8 xor_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	u8 len;
+
+	len  = mov_r64_i32(buf, JIT_REG_TMP, imm);
+	len += xor_r64(BUF(buf, len), rd, JIT_REG_TMP);
+	return len;
+}
+
+/* "asl a,b,c" --> "a = (b << (c & 31))". */
+u8 lsh_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_asl_r(buf, REG_LO(rd), REG_LO(rd), REG_LO(rs));
+}
+
+u8 lsh_r32_i32(u8 *buf, u8 rd, u8 imm)
+{
+	return arc_asli_r(buf, REG_LO(rd), REG_LO(rd), imm);
+}
+
+/*
+ * algorithm
+ * ---------
+ * if (n <= 32)
+ *   to_hi = lo >> (32-n)   # (32-n) is the negate of "n" in a 5-bit width.
+ *   lo <<= n
+ *   hi <<= n
+ *   hi |= to_hi
+ * else
+ *   hi = lo << (n-32)
+ *   lo = 0
+ *
+ * assembly translation for "LSH B, C"
+ * (heavily influenced by ARC gcc)
+ * -----------------------------------
+ * not    t0, C_lo            # The first 3 lines are almost the same as:
+ * lsr    t1, B_lo, 1         #   neg   t0, C_lo
+ * lsr    t1, t1, t0          #   lsr   t1, B_lo, t0   --> t1 is "to_hi"
+ * mov    t0, C_lo*           # with one important difference. In "neg"
+ * asl    B_lo, B_lo, t0      # version, when C_lo=0, t1 becomes B_lo while
+ * asl    B_hi, B_hi, t0      # it should be 0. The "not" approach instead,
+ * or     B_hi, B_hi, t1      # "shift"s t1 once and 31 times, practically
+ * btst   t0, 5               # setting it to 0 when C_lo=0.
+ * mov.ne B_hi, B_lo**
+ * mov.ne B_lo, 0
+ *
+ * *The "mov t0, C_lo" is necessary to cover the cases that C is the same
+ * register as B.
+ *
+ * **ARC performs a shift in this manner: B <<= (C & 31)
+ * For 32<=n<64, "n-32" and "n&31" are the same. Therefore, "B << n" and
+ * "B << (n-32)" yield the same results. e.g. the results of "B << 35" and
+ * "B << 3" are the same.
+ *
+ * The behaviour is undefined for n >= 64.
+ */
+u8 lsh_r64(u8 *buf, u8 rd, u8 rs)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 t1   = REG_HI(JIT_REG_TMP);
+	const u8 C_lo = REG_LO(rs);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	u8 len;
+
+	len  = arc_not_r(buf, t0, C_lo);
+	len += arc_lsri_r(BUF(buf, len), t1, B_lo, 1);
+	len += arc_lsr_r(BUF(buf, len), t1, t1, t0);
+	len += arc_mov_r(BUF(buf, len), t0, C_lo);
+	len += arc_asl_r(BUF(buf, len), B_lo, B_lo, t0);
+	len += arc_asl_r(BUF(buf, len), B_hi, B_hi, t0);
+	len += arc_or_r(BUF(buf, len), B_hi, B_hi, t1);
+	len += arc_btst_i(BUF(buf, len), t0, 5);
+	len += arc_mov_cc_r(BUF(buf, len), CC_unequal, B_hi, B_lo);
+	len += arc_movu_cc_r(BUF(buf, len), CC_unequal, B_lo, 0);
+
+	return len;
+}
+
+/*
+ * if (n < 32)
+ *   to_hi = B_lo >> 32-n          # extract upper n bits
+ *   lo <<= n
+ *   hi <<=n
+ *   hi |= to_hi
+ * else if (n < 64)
+ *   hi = lo << n-32
+ *   lo = 0
+ */
+u8 lsh_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	const u8 n    = (u8)imm;
+	u8 len = 0;
+
+	if (n == 0) {
+		return 0;
+	} else if (n <= 31) {
+		len  = arc_lsri_r(buf, t0, B_lo, 32 - n);
+		len += arc_asli_r(BUF(buf, len), B_lo, B_lo, n);
+		len += arc_asli_r(BUF(buf, len), B_hi, B_hi, n);
+		len += arc_or_r(BUF(buf, len), B_hi, B_hi, t0);
+	} else if (n <= 63) {
+		len  = arc_asli_r(buf, B_hi, B_lo, n - 32);
+		len += arc_movi_r(BUF(buf, len), B_lo, 0);
+	}
+	/* n >= 64 is undefined behaviour. */
+
+	return len;
+}
+
+/* "lsr a,b,c" --> "a = (b >> (c & 31))". */
+u8 rsh_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_lsr_r(buf, REG_LO(rd), REG_LO(rd), REG_LO(rs));
+}
+
+u8 rsh_r32_i32(u8 *buf, u8 rd, u8 imm)
+{
+	return arc_lsri_r(buf, REG_LO(rd), REG_LO(rd), imm);
+}
+
+/*
+ * For better commentary, see lsh_r64().
+ *
+ * algorithm
+ * ---------
+ * if (n <= 32)
+ *   to_lo = hi << (32-n)
+ *   hi >>= n
+ *   lo >>= n
+ *   lo |= to_lo
+ * else
+ *   lo = hi >> (n-32)
+ *   hi = 0
+ *
+ * RSH    B,C
+ * ----------
+ * not    t0, C_lo
+ * asl    t1, B_hi, 1
+ * asl    t1, t1, t0
+ * mov    t0, C_lo
+ * lsr    B_hi, B_hi, t0
+ * lsr    B_lo, B_lo, t0
+ * or     B_lo, B_lo, t1
+ * btst   t0, 5
+ * mov.ne B_lo, B_hi
+ * mov.ne B_hi, 0
+ */
+u8 rsh_r64(u8 *buf, u8 rd, u8 rs)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 t1   = REG_HI(JIT_REG_TMP);
+	const u8 C_lo = REG_LO(rs);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	u8 len;
+
+	len  = arc_not_r(buf, t0, C_lo);
+	len += arc_asli_r(BUF(buf, len), t1, B_hi, 1);
+	len += arc_asl_r(BUF(buf, len), t1, t1, t0);
+	len += arc_mov_r(BUF(buf, len), t0, C_lo);
+	len += arc_lsr_r(BUF(buf, len), B_hi, B_hi, t0);
+	len += arc_lsr_r(BUF(buf, len), B_lo, B_lo, t0);
+	len += arc_or_r(BUF(buf, len), B_lo, B_lo, t1);
+	len += arc_btst_i(BUF(buf, len), t0, 5);
+	len += arc_mov_cc_r(BUF(buf, len), CC_unequal, B_lo, B_hi);
+	len += arc_movu_cc_r(BUF(buf, len), CC_unequal, B_hi, 0);
+
+	return len;
+}
+
+/*
+ * if (n < 32)
+ *   to_lo = B_lo << 32-n     # extract lower n bits, right-padded with 32-n 0s
+ *   lo >>=n
+ *   hi >>=n
+ *   hi |= to_lo
+ * else if (n < 64)
+ *   lo = hi >> n-32
+ *   hi = 0
+ */
+u8 rsh_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	const u8 n    = (u8)imm;
+	u8 len = 0;
+
+	if (n == 0) {
+		return 0;
+	} else if (n <= 31) {
+		len  = arc_asli_r(buf, t0, B_hi, 32 - n);
+		len += arc_lsri_r(BUF(buf, len), B_lo, B_lo, n);
+		len += arc_lsri_r(BUF(buf, len), B_hi, B_hi, n);
+		len += arc_or_r(BUF(buf, len), B_lo, B_lo, t0);
+	} else if (n <= 63) {
+		len  = arc_lsri_r(buf, B_lo, B_hi, n - 32);
+		len += arc_movi_r(BUF(buf, len), B_hi, 0);
+	}
+	/* n >= 64 is undefined behaviour. */
+
+	return len;
+}
+
+/* "asr a,b,c" --> "a = (b s>> (c & 31))". */
+u8 arsh_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_asr_r(buf, REG_LO(rd), REG_LO(rd), REG_LO(rs));
+}
+
+u8 arsh_r32_i32(u8 *buf, u8 rd, u8 imm)
+{
+	return arc_asri_r(buf, REG_LO(rd), REG_LO(rd), imm);
+}
+
+/*
+ * For comparison, see rsh_r64().
+ *
+ * algorithm
+ * ---------
+ * if (n <= 32)
+ *   to_lo = hi << (32-n)
+ *   hi s>>= n
+ *   lo  >>= n
+ *   lo |= to_lo
+ * else
+ *   hi_sign = hi s>>31
+ *   lo = hi s>> (n-32)
+ *   hi = hi_sign
+ *
+ * ARSH   B,C
+ * ----------
+ * not    t0, C_lo
+ * asl    t1, B_hi, 1
+ * asl    t1, t1, t0
+ * mov    t0, C_lo
+ * asr    B_hi, B_hi, t0
+ * lsr    B_lo, B_lo, t0
+ * or     B_lo, B_lo, t1
+ * btst   t0, 5
+ * asr    t0, B_hi, 31        # now, t0 = 0 or -1 based on B_hi's sign
+ * mov.ne B_lo, B_hi
+ * mov.ne B_hi, t0
+ */
+u8 arsh_r64(u8 *buf, u8 rd, u8 rs)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 t1   = REG_HI(JIT_REG_TMP);
+	const u8 C_lo = REG_LO(rs);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	u8 len;
+
+	len  = arc_not_r(buf, t0, C_lo);
+	len += arc_asli_r(BUF(buf, len), t1, B_hi, 1);
+	len += arc_asl_r(BUF(buf, len), t1, t1, t0);
+	len += arc_mov_r(BUF(buf, len), t0, C_lo);
+	len += arc_asr_r(BUF(buf, len), B_hi, B_hi, t0);
+	len += arc_lsr_r(BUF(buf, len), B_lo, B_lo, t0);
+	len += arc_or_r(BUF(buf, len), B_lo, B_lo, t1);
+	len += arc_btst_i(BUF(buf, len), t0, 5);
+	len += arc_asri_r(BUF(buf, len), t0, B_hi, 31);
+	len += arc_mov_cc_r(BUF(buf, len), CC_unequal, B_lo, B_hi);
+	len += arc_mov_cc_r(BUF(buf, len), CC_unequal, B_hi, t0);
+
+	return len;
+}
+
+/*
+ * if (n < 32)
+ *   to_lo = lo << 32-n     # extract lower n bits, right-padded with 32-n 0s
+ *   lo >>=n
+ *   hi s>>=n
+ *   hi |= to_lo
+ * else if (n < 64)
+ *   lo = hi s>> n-32
+ *   hi = (lo[msb] ? -1 : 0)
+ */
+u8 arsh_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	const u8 n    = (u8)imm;
+	u8 len = 0;
+
+	if (n == 0) {
+		return 0;
+	} else if (n <= 31) {
+		len  = arc_asli_r(buf, t0, B_hi, 32 - n);
+		len += arc_lsri_r(BUF(buf, len), B_lo, B_lo, n);
+		len += arc_asri_r(BUF(buf, len), B_hi, B_hi, n);
+		len += arc_or_r(BUF(buf, len), B_lo, B_lo, t0);
+	} else if (n <= 63) {
+		len  = arc_asri_r(buf, B_lo, B_hi, n - 32);
+		len += arc_movi_r(BUF(buf, len), B_hi, -1);
+		len += arc_btst_i(BUF(buf, len), B_lo, 31);
+		len += arc_movu_cc_r(BUF(buf, len), CC_equal, B_hi, 0);
+	}
+	/* n >= 64 is undefined behaviour. */
+
+	return len;
+}
+
+u8 gen_swap(u8 *buf, u8 rd, u8 size, u8 endian, bool force, bool do_zext)
+{
+	u8 len = 0;
+#ifdef __BIG_ENDIAN
+	const u8 host_endian = BPF_FROM_BE;
+#else
+	const u8 host_endian = BPF_FROM_LE;
+#endif
+	if (host_endian != endian || force) {
+		switch (size) {
+		case 16:
+			/*
+			 * r = B4B3_B2B1 << 16 --> r = B2B1_0000
+			 * then, swape(r) would become the desired 0000_B1B2
+			 */
+			len = arc_asli_r(buf, REG_LO(rd), REG_LO(rd), 16);
+			fallthrough;
+		case 32:
+			len += arc_swape_r(BUF(buf, len), REG_LO(rd));
+			if (do_zext)
+				len += zext(BUF(buf, len), rd);
+			break;
+		case 64:
+			/*
+			 * swap "hi" and "lo":
+			 *   hi ^= lo;
+			 *   lo ^= hi;
+			 *   hi ^= lo;
+			 * and then swap the bytes in "hi" and "lo".
+			 */
+			len  = arc_xor_r(buf, REG_HI(rd), REG_LO(rd));
+			len += arc_xor_r(BUF(buf, len), REG_LO(rd), REG_HI(rd));
+			len += arc_xor_r(BUF(buf, len), REG_HI(rd), REG_LO(rd));
+			len += arc_swape_r(BUF(buf, len), REG_LO(rd));
+			len += arc_swape_r(BUF(buf, len), REG_HI(rd));
+			break;
+		default:
+			/* The caller must have handled this. */
+			break;
+		}
+	} else {
+		/*
+		 * If the same endianness, there's not much to do other
+		 * than zeroing out the upper bytes based on the "size".
+		 */
+		switch (size) {
+		case 16:
+			len = arc_and_i(buf, REG_LO(rd), 0xffff);
+			fallthrough;
+		case 32:
+			if (do_zext)
+				len += zext(BUF(buf, len), rd);
+			break;
+		case 64:
+			break;
+		default:
+			/* The caller must have handled this. */
+			break;
+		}
+	}
+
+	return len;
+}
+
+/*
+ * To create a frame, all that is needed is:
+ *
+ *  push fp
+ *  mov  fp, sp
+ *  sub  sp, <frame_size>
+ *
+ * "push fp" is taken care of separately while saving the clobbered registers.
+ * All that remains is copying SP value to FP and shrinking SP's address space
+ * for any possible function call to come.
+ */
+static inline u8 frame_create(u8 *buf, u16 size)
+{
+	u8 len;
+
+	len = arc_mov_r(buf, ARC_R_FP, ARC_R_SP);
+	if (IN_U6_RANGE(size))
+		len += arc_subi_r(BUF(buf, len), ARC_R_SP, size);
+	else
+		len += arc_sub_i(BUF(buf, len), ARC_R_SP, size);
+	return len;
+}
+
+/*
+ * mov sp, fp
+ *
+ * The value of SP upon entering was copied to FP.
+ */
+static inline u8 frame_restore(u8 *buf)
+{
+	return arc_mov_r(buf, ARC_R_SP, ARC_R_FP);
+}
+
+/*
+ * Going from a JITed code to the native caller:
+ *
+ * mov ARC_ABI_RET_lo, BPF_REG_0_lo     # r0 <- r8
+ * mov ARC_ABI_RET_hi, BPF_REG_0_hi     # r1 <- r9
+ */
+static u8 bpf_to_arc_return(u8 *buf)
+{
+	u8 len;
+
+	len  = arc_mov_r(buf, ARC_R_0, REG_LO(BPF_REG_0));
+	len += arc_mov_r(BUF(buf, len), ARC_R_1, REG_HI(BPF_REG_0));
+	return len;
+}
+
+/*
+ * Coming back from an external (in-kernel) function to the JITed code:
+ *
+ * mov ARC_ABI_RET_lo, BPF_REG_0_lo     # r8 <- r0
+ * mov ARC_ABI_RET_hi, BPF_REG_0_hi     # r9 <- r1
+ */
+u8 arc_to_bpf_return(u8 *buf)
+{
+	u8 len;
+
+	len  = arc_mov_r(buf, REG_LO(BPF_REG_0), ARC_R_0);
+	len += arc_mov_r(BUF(buf, len), REG_HI(BPF_REG_0), ARC_R_1);
+	return len;
+}
+
+/*
+ * This translation leads to:
+ *
+ *   mov r10, addr                # always an 8-byte instruction
+ *   jl  [r10]
+ *
+ * The length of the "mov" must be fixed (8), otherwise it may diverge
+ * during the normal and extra passes:
+ *
+ *          normal pass                  extra pass
+ *
+ *   180:  mov     r10,0        |   180:  mov     r10,0x700578d8
+ *   184:  jl      [r10]        |   188:  jl      [r10]
+ *   188:  add.f   r16,r16,0x1  |   18c:  adc     r17,r17,0
+ *   18c:  adc     r17,r17,0    |
+ *
+ * In the above example, the change from "r10 <- 0" to "r10 <- 0x700578d8"
+ * has led to an increase in the length of the "mov" instruction.
+ * Inadvertently, that caused the loss of the "add.f" instruction.
+ */
+static u8 jump_and_link(u8 *buf, u32 addr)
+{
+	u8 len;
+
+	len  = arc_mov_i_fixed(buf, REG_LO(JIT_REG_TMP), addr);
+	len += arc_jl(BUF(buf, len), REG_LO(JIT_REG_TMP));
+	return len;
+}
+
+/*
+ * This function determines which ARC registers must be saved and restored.
+ * It does so by looking into:
+ *
+ * "bpf_reg": The clobbered (destination) BPF register
+ * "is_call": Indicator if the current instruction is a call
+ *
+ * When a register of interest is clobbered, its corresponding bit position
+ * in return value, "usage", is set to true.
+ */
+u32 mask_for_used_regs(u8 bpf_reg, bool is_call)
+{
+	u32 usage = 0;
+
+	/* BPF registers that must be saved. */
+	if (bpf_reg >= BPF_REG_6 && bpf_reg <= BPF_REG_9) {
+		usage |= BIT(REG_LO(bpf_reg));
+		usage |= BIT(REG_HI(bpf_reg));
+	/*
+	 * Using the frame pointer register implies that it should
+	 * be saved and reinitialised with the current frame data.
+	 */
+	} else if (bpf_reg == BPF_REG_FP) {
+		usage |= BIT(REG_LO(BPF_REG_FP));
+	/* Could there be some ARC registers that must to be saved? */
+	} else {
+		if (REG_LO(bpf_reg) >= ARC_CALLEE_SAVED_REG_FIRST &&
+		    REG_LO(bpf_reg) <= ARC_CALLEE_SAVED_REG_LAST)
+			usage |= BIT(REG_LO(bpf_reg));
+
+		if (REG_HI(bpf_reg) >= ARC_CALLEE_SAVED_REG_FIRST &&
+		    REG_HI(bpf_reg) <= ARC_CALLEE_SAVED_REG_LAST)
+			usage |= BIT(REG_HI(bpf_reg));
+	}
+
+	/* A "call" indicates that ARC's "blink" reg must be saved. */
+	usage |= is_call ? BIT(ARC_R_BLINK) : 0;
+
+	return usage;
+}
+
+/*
+ * push blink             # if blink is marked as clobbered
+ * push r[0-n]            # if r[i] is marked as clobbered
+ * push fp                # if fp is marked as clobbered
+ * mov  fp, sp            # if frame_size > 0 (clobbers fp)
+ * sub  sp, <frame_size>  # same as above
+ */
+u8 arc_prologue(u8 *buf, u32 usage, u16 frame_size)
+{
+	u8 len = 0;
+	u32 gp_regs = 0;
+
+	/* Deal with blink first. */
+	if (usage & BIT(ARC_R_BLINK))
+		len += arc_push_r(BUF(buf, len), ARC_R_BLINK);
+
+	gp_regs = usage & ~(BIT(ARC_R_BLINK) | BIT(ARC_R_FP));
+	while (gp_regs) {
+		u8 reg = __builtin_ffs(gp_regs) - 1;
+
+		len += arc_push_r(BUF(buf, len), reg);
+		gp_regs &= ~BIT(reg);
+	}
+
+	/* Deal with fp last. */
+	if ((usage & BIT(ARC_R_FP)) || frame_size > 0)
+		len += arc_push_r(BUF(buf, len), ARC_R_FP);
+
+	if (frame_size > 0)
+		len += frame_create(BUF(buf, len), frame_size);
+
+#ifdef ARC_BPF_JIT_DEBUG
+	if ((usage & BIT(ARC_R_FP)) && frame_size == 0) {
+		pr_err("FP is being saved while there is no frame.");
+		BUG();
+	}
+#endif
+
+	return len;
+}
+
+/*
+ * mov  sp, fp            # if frame_size > 0
+ * pop  fp                # if fp is marked as clobbered
+ * pop  r[n-0]            # if r[i] is marked as clobbered
+ * pop  blink             # if blink is marked as clobbered
+ * mov  r0, r8            # always: ABI_return <- BPF_return
+ * mov  r1, r9            # continuation of above
+ * j    [blink]           # always
+ *
+ * "fp being marked as clobbered" and "frame_size > 0" are the two sides of
+ * the same coin.
+ */
+u8 arc_epilogue(u8 *buf, u32 usage, u16 frame_size)
+{
+	u32 len = 0;
+	u32 gp_regs = 0;
+
+#ifdef ARC_BPF_JIT_DEBUG
+	if ((usage & BIT(ARC_R_FP)) && frame_size == 0) {
+		pr_err("FP is being saved while there is no frame.");
+		BUG();
+	}
+#endif
+
+	if (frame_size > 0)
+		len += frame_restore(BUF(buf, len));
+
+	/* Deal with fp first. */
+	if ((usage & BIT(ARC_R_FP)) || frame_size > 0)
+		len += arc_pop_r(BUF(buf, len), ARC_R_FP);
+
+	gp_regs = usage & ~(BIT(ARC_R_BLINK) | BIT(ARC_R_FP));
+	while (gp_regs) {
+		/* "usage" is 32-bit, each bit indicating an ARC register. */
+		u8 reg = 31 - __builtin_clz(gp_regs);
+
+		len += arc_pop_r(BUF(buf, len), reg);
+		gp_regs &= ~BIT(reg);
+	}
+
+	/* Deal with blink last. */
+	if (usage & BIT(ARC_R_BLINK))
+		len += arc_pop_r(BUF(buf, len), ARC_R_BLINK);
+
+	/* Wrap up the return value and jump back to the caller. */
+	len += bpf_to_arc_return(BUF(buf, len));
+	len += arc_jmp_return(BUF(buf, len));
+
+	return len;
+}
+
+/*
+ * For details on the algorithm, see the comments of "gen_jcc_64()".
+ *
+ * This data structure is holding information for jump translations.
+ *
+ * jit_off: How many bytes into the current JIT address, "b"ranch insn. occurs
+ * cond: The condition that the ARC branch instruction must use
+ *
+ * e.g.:
+ *
+ * BPF_JGE  R1, R0, @target
+ * ------------------------
+ *            |
+ *            v
+ * 0x1000: cmp  r3, r1     # 0x1000 is the JIT address for "BPF_JGE ..." insn
+ * 0x1004: bhi  @target    # first jump (branch higher)
+ * 0x1008: blo  @end       # second jump acting as a skip (end is 0x1014)
+ * 0x100C: cmp  r2, r0     # the lower 32 bits are evaluated
+ * 0x1010: bhs  @target    # third jump (branch higher or same)
+ * 0x1014: ...
+ *
+ * The jit_off(set) of the "bhi" is 4 bytes.
+ * The cond(ition) for the "bhi" is "CC_great_u".
+ *
+ * The jit_off(set) is necessary for calculating the exact displacement
+ * to the "target" address:
+ *
+ * jit_address + jit_off(set) - @target
+ * 0x1000      + 4            - @target
+ */
+#define JCC64_NR_OF_JMPS 3	/* Number of jumps in jcc64 template. */
+#define JCC64_INSNS_TO_END 3	/* Number of insn. inclusive the 2nd jmp to end. */
+#define JCC64_SKIP_JMP 1	/* Index of the "skip" jump to "end". */
+static const struct {
+	/*
+	 * "jit_off" is common between all "jmp[]" and is coupled with
+	 * "cond" of each "jmp[]" instance. e.g.:
+	 *
+	 * arcv2_64_jccs.jit_off[1]
+	 * arcv2_64_jccs.jmp[ARC_CC_UGT].cond[1]
+	 *
+	 * Are indicating that the second jump in JITed code of "UGT"
+	 * is at offset "jit_off[1]" while its condition is "cond[1]".
+	 */
+	u8 jit_off[JCC64_NR_OF_JMPS];
+
+	struct {
+		u8 cond[JCC64_NR_OF_JMPS];
+	} jmp[ARC_CC_SLE + 1];
+} arcv2_64_jccs = {
+	.jit_off = {
+		INSN_len_normal * 1,
+		INSN_len_normal * 2,
+		INSN_len_normal * 4
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   bhi  @target         # 1: u>
+	 *   blo  @end            # 2: u<
+	 *   cmp  rd_lo, rs_lo
+	 *   bhi  @target         # 3: u>
+	 * end:
+	 */
+	.jmp[ARC_CC_UGT] = {
+		.cond = {CC_great_u, CC_less_u, CC_great_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   bhi  @target         # 1: u>
+	 *   blo  @end            # 2: u<
+	 *   cmp  rd_lo, rs_lo
+	 *   bhs  @target         # 3: u>=
+	 * end:
+	 */
+	.jmp[ARC_CC_UGE] = {
+		.cond = {CC_great_u, CC_less_u, CC_great_eq_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   blo  @target         # 1: u<
+	 *   bhi  @end            # 2: u>
+	 *   cmp  rd_lo, rs_lo
+	 *   blo  @target         # 3: u<
+	 * end:
+	 */
+	.jmp[ARC_CC_ULT] = {
+		.cond = {CC_less_u, CC_great_u, CC_less_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   blo  @target         # 1: u<
+	 *   bhi  @end            # 2: u>
+	 *   cmp  rd_lo, rs_lo
+	 *   bls  @target         # 3: u<=
+	 * end:
+	 */
+	.jmp[ARC_CC_ULE] = {
+		.cond = {CC_less_u, CC_great_u, CC_less_eq_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   bgt  @target         # 1: s>
+	 *   blt  @end            # 2: s<
+	 *   cmp  rd_lo, rs_lo
+	 *   bhi  @target         # 3: u>
+	 * end:
+	 */
+	.jmp[ARC_CC_SGT] = {
+		.cond = {CC_great_s, CC_less_s, CC_great_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   bgt  @target         # 1: s>
+	 *   blt  @end            # 2: s<
+	 *   cmp  rd_lo, rs_lo
+	 *   bhs  @target         # 3: u>=
+	 * end:
+	 */
+	.jmp[ARC_CC_SGE] = {
+		.cond = {CC_great_s, CC_less_s, CC_great_eq_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   blt  @target         # 1: s<
+	 *   bgt  @end            # 2: s>
+	 *   cmp  rd_lo, rs_lo
+	 *   blo  @target         # 3: u<
+	 * end:
+	 */
+	.jmp[ARC_CC_SLT] = {
+		.cond = {CC_less_s, CC_great_s, CC_less_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   blt  @target         # 1: s<
+	 *   bgt  @end            # 2: s>
+	 *   cmp  rd_lo, rs_lo
+	 *   bls  @target         # 3: u<=
+	 * end:
+	 */
+	.jmp[ARC_CC_SLE] = {
+		.cond = {CC_less_s, CC_great_s, CC_less_eq_u}
+	}
+};
+
+/*
+ * The displacement (offset) for ARC's "b"ranch instruction is the distance
+ * from the aligned version of _current_ instruction (PCL) to the target
+ * instruction:
+ *
+ * DISP = TARGET - PCL          # PCL is the word aligned PC
+ */
+static inline s32 get_displacement(u32 curr_off, u32 targ_off)
+{
+	return (s32)(targ_off - (curr_off & ~3L));
+}
+
+/*
+ * "disp"lacement should be:
+ *
+ * 1. 16-bit aligned.
+ * 2. fit in S25, because no "condition code" is supposed to be encoded.
+ */
+static inline bool is_valid_far_disp(s32 disp)
+{
+	return (!(disp & 1) && IN_S25_RANGE(disp));
+}
+
+/*
+ * "disp"lacement should be:
+ *
+ * 1. 16-bit aligned.
+ * 2. fit in S21, because "condition code" is supposed to be encoded too.
+ */
+static inline bool is_valid_near_disp(s32 disp)
+{
+	return (!(disp & 1) && IN_S21_RANGE(disp));
+}
+
+/*
+ * cmp        rd_hi, rs_hi
+ * cmp.z      rd_lo, rs_lo
+ * b{eq,ne}   @target
+ *   |  |
+ *   |  `-->  "eq" param is false (JNE)
+ *   `----->  "eq" param is true  (JEQ)
+ */
+static int gen_j_eq_64(u8 *buf, u8 rd, u8 rs, bool eq,
+		       u32 curr_off, u32 targ_off)
+{
+	s32 disp;
+	u8 len = 0;
+
+	len += arc_cmp_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	len += arc_cmpz_r(BUF(buf, len), REG_LO(rd), REG_LO(rs));
+	disp = get_displacement(curr_off + len, targ_off);
+	len += arc_bcc(BUF(buf, len), eq ? CC_equal : CC_unequal, disp);
+
+	return len;
+}
+
+/*
+ * tst   rd_hi, rs_hi
+ * tst.z rd_lo, rs_lo
+ * bne   @target
+ */
+static u8 gen_jset_64(u8 *buf, u8 rd, u8 rs, u32 curr_off, u32 targ_off)
+{
+	u8 len = 0;
+	s32 disp;
+
+	len += arc_tst_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	len += arc_tstz_r(BUF(buf, len), REG_LO(rd), REG_LO(rs));
+	disp = get_displacement(curr_off + len, targ_off);
+	len += arc_bcc(BUF(buf, len), CC_unequal, disp);
+
+	return len;
+}
+
+/*
+ * Verify if all the jumps for a JITed jcc64 operation are valid,
+ * by consulting the data stored at "arcv2_64_jccs".
+ */
+static bool check_jcc_64(u32 curr_off, u32 targ_off, u8 cond)
+{
+	size_t i;
+
+	if (cond >= ARC_CC_LAST)
+		return false;
+
+	for (i = 0; i < JCC64_NR_OF_JMPS; i++) {
+		u32 from, to;
+
+		from = curr_off + arcv2_64_jccs.jit_off[i];
+		/* for the 2nd jump, we jump to the end of block. */
+		if (i != JCC64_SKIP_JMP)
+			to = targ_off;
+		else
+			to = from + (JCC64_INSNS_TO_END * INSN_len_normal);
+		/* There is a "cc" in the instruction, so a "near" jump. */
+		if (!is_valid_near_disp(get_displacement(from, to)))
+			return false;
+	}
+
+	return true;
+}
+
+/* Can the jump from "curr_off" to "targ_off" actually happen? */
+bool check_jmp_64(u32 curr_off, u32 targ_off, u8 cond)
+{
+	s32 disp;
+
+	switch (cond) {
+	case ARC_CC_UGT:
+	case ARC_CC_UGE:
+	case ARC_CC_ULT:
+	case ARC_CC_ULE:
+	case ARC_CC_SGT:
+	case ARC_CC_SGE:
+	case ARC_CC_SLT:
+	case ARC_CC_SLE:
+		return check_jcc_64(curr_off, targ_off, cond);
+	case ARC_CC_EQ:
+	case ARC_CC_NE:
+	case ARC_CC_SET:
+		/*
+		 * The "jump" for the JITed BPF_J{SET,EQ,NE} is actually the
+		 * 3rd instruction. See comments of "gen_j{set,_eq}_64()".
+		 */
+		curr_off += 2 * INSN_len_normal;
+		disp = get_displacement(curr_off, targ_off);
+		/* There is a "cc" field in the issued instruction. */
+		return is_valid_near_disp(disp);
+	case ARC_CC_AL:
+		disp = get_displacement(curr_off, targ_off);
+		return is_valid_far_disp(disp);
+	default:
+		return false;
+	}
+}
+
+/*
+ * The template for the 64-bit jumps with the following BPF conditions
+ *
+ * u< u<= u> u>= s< s<= s> s>=
+ *
+ * Looks like below:
+ *
+ *   cmp   rd_hi, rs_hi
+ *   b<c1> @target
+ *   b<c2> @end
+ *   cmp   rd_lo, rs_lo   # if execution reaches here, r{d,s}_hi are equal
+ *   b<c3> @target
+ * end:
+ *
+ * "c1" is the condition that JIT is handling minus the equality part.
+ * For instance if we have to translate an "unsigned greater or equal",
+ * then "c1" will be "unsigned greater". We won't know about equality
+ * until all 64-bits of data (higeher and lower registers) are processed.
+ *
+ * "c2" is the counter logic of "c1". For instance, if "c1" is originated
+ * from "s>", then "c2" would be "s<". Notice that equality doesn't play
+ * a role here either, because the lower 32 bits are not processed yet.
+ *
+ * "c3" is the unsigned version of "c1", no matter if the BPF condition
+ * was signed or unsigned. An unsigned version is necessary, because the
+ * MSB of the lower 32 bits does not reflect a sign in the whole 64-bit
+ * scheme. Otherwise, 64-bit comparisons like
+ * (0x0000_0000,0x8000_0000) s>= (0x0000_0000,0x0000_0000)
+ * would yield an incorrect result. Finally, if there is an equality
+ * check in the BPF condition, it will be reflected in "c3".
+ *
+ * You can find all the instances of this template where the
+ * "arcv2_64_jccs" is getting initialised.
+ */
+static u8 gen_jcc_64(u8 *buf, u8 rd, u8 rs, u8 cond,
+		     u32 curr_off, u32 targ_off)
+{
+	s32 disp;
+	u32 end_off;
+	const u8 *cc = arcv2_64_jccs.jmp[cond].cond;
+	u8 len = 0;
+
+	/* cmp rd_hi, rs_hi */
+	len += arc_cmp_r(buf, REG_HI(rd), REG_HI(rs));
+
+	/* b<c1> @target */
+	disp = get_displacement(curr_off + len, targ_off);
+	len += arc_bcc(BUF(buf, len), cc[0], disp);
+
+	/* b<c2> @end */
+	end_off = curr_off + len + (JCC64_INSNS_TO_END * INSN_len_normal);
+	disp = get_displacement(curr_off + len, end_off);
+	len += arc_bcc(BUF(buf, len), cc[1], disp);
+
+	/* cmp rd_lo, rs_lo */
+	len += arc_cmp_r(BUF(buf, len), REG_LO(rd), REG_LO(rs));
+
+	/* b<c3> @target */
+	disp = get_displacement(curr_off + len, targ_off);
+	len += arc_bcc(BUF(buf, len), cc[2], disp);
+
+	return len;
+}
+
+/*
+ * This function only applies the necessary logic to make the proper
+ * translations. All the sanity checks must have already been done
+ * by calling the check_jmp_64().
+ */
+u8 gen_jmp_64(u8 *buf, u8 rd, u8 rs, u8 cond, u32 curr_off, u32 targ_off)
+{
+	u8 len = 0;
+	bool eq = false;
+	s32 disp;
+
+	switch (cond) {
+	case ARC_CC_AL:
+		disp = get_displacement(curr_off, targ_off);
+		len = arc_b(buf, disp);
+		break;
+	case ARC_CC_UGT:
+	case ARC_CC_UGE:
+	case ARC_CC_ULT:
+	case ARC_CC_ULE:
+	case ARC_CC_SGT:
+	case ARC_CC_SGE:
+	case ARC_CC_SLT:
+	case ARC_CC_SLE:
+		len = gen_jcc_64(buf, rd, rs, cond, curr_off, targ_off);
+		break;
+	case ARC_CC_EQ:
+		eq = true;
+		fallthrough;
+	case ARC_CC_NE:
+		len = gen_j_eq_64(buf, rd, rs, eq, curr_off, targ_off);
+		break;
+	case ARC_CC_SET:
+		len = gen_jset_64(buf, rd, rs, curr_off, targ_off);
+		break;
+	default:
+#ifdef ARC_BPF_JIT_DEBUG
+		pr_err("64-bit jump condition is not known.");
+		BUG();
+#endif
+	}
+	return len;
+}
+
+/*
+ * The condition codes to use when generating JIT instructions
+ * for 32-bit jumps.
+ *
+ * The "ARC_CC_AL" index is not really used by the code, but it
+ * is here for the sake of completeness.
+ *
+ * The "ARC_CC_SET" becomes "CC_unequal" because of the "tst"
+ * instruction that precedes the conditional branch.
+ */
+static const u8 arcv2_32_jmps[ARC_CC_LAST] = {
+	[ARC_CC_UGT] = CC_great_u,
+	[ARC_CC_UGE] = CC_great_eq_u,
+	[ARC_CC_ULT] = CC_less_u,
+	[ARC_CC_ULE] = CC_less_eq_u,
+	[ARC_CC_SGT] = CC_great_s,
+	[ARC_CC_SGE] = CC_great_eq_s,
+	[ARC_CC_SLT] = CC_less_s,
+	[ARC_CC_SLE] = CC_less_eq_s,
+	[ARC_CC_AL]  = CC_always,
+	[ARC_CC_EQ]  = CC_equal,
+	[ARC_CC_NE]  = CC_unequal,
+	[ARC_CC_SET] = CC_unequal
+};
+
+/* Can the jump from "curr_off" to "targ_off" actually happen? */
+bool check_jmp_32(u32 curr_off, u32 targ_off, u8 cond)
+{
+	u8 addendum;
+	s32 disp;
+
+	if (cond >= ARC_CC_LAST)
+		return false;
+
+	/*
+	 * The unconditional jump happens immediately, while the rest
+	 * are either preceded by a "cmp" or "tst" instruction.
+	 */
+	addendum = (cond == ARC_CC_AL) ? 0 : INSN_len_normal;
+	disp = get_displacement(curr_off + addendum, targ_off);
+
+	if (cond == ARC_CC_AL)
+		return is_valid_far_disp(disp);
+	else
+		return is_valid_near_disp(disp);
+}
+
+/*
+ * The JITed code for 32-bit (conditional) branches:
+ *
+ * ARC_CC_AL  @target
+ *   b @jit_targ_addr
+ *
+ * ARC_CC_SET rd, rs, @target
+ *   tst rd, rs
+ *   bnz @jit_targ_addr
+ *
+ * ARC_CC_xx  rd, rs, @target
+ *   cmp rd, rs
+ *   b<cc> @jit_targ_addr            # cc = arcv2_32_jmps[xx]
+ */
+u8 gen_jmp_32(u8 *buf, u8 rd, u8 rs, u8 cond, u32 curr_off, u32 targ_off)
+{
+	s32 disp;
+	u8 len = 0;
+
+	/*
+	 * Although this must have already been checked by "check_jmp_32()",
+	 * we're not going to risk accessing "arcv2_32_jmps" array without
+	 * the boundary check.
+	 */
+	if (cond >= ARC_CC_LAST) {
+#ifdef ARC_BPF_JIT_DEBUG
+		pr_err("32-bit jump condition is not known.");
+		BUG();
+#endif
+		return 0;
+	}
+
+	/* If there is a "condition", issue the "cmp" or "tst" first. */
+	if (cond != ARC_CC_AL) {
+		if (cond == ARC_CC_SET)
+			len = tst_r32(buf, rd, rs);
+		else
+			len = cmp_r32(buf, rd, rs);
+		/*
+		 * The issued instruction affects the "disp"lacement as
+		 * it alters the "curr_off" by its "len"gth. The "curr_off"
+		 * should always point to the jump instruction.
+		 */
+		disp = get_displacement(curr_off + len, targ_off);
+		len += arc_bcc(BUF(buf, len), arcv2_32_jmps[cond], disp);
+	} else {
+		/* The straight forward unconditional jump. */
+		disp = get_displacement(curr_off, targ_off);
+		len = arc_b(buf, disp);
+	}
+
+	return len;
+}
+
+/*
+ * Generate code for functions calls. There can be two types of calls:
+ *
+ * - Calling another BPF function
+ * - Calling an in-kernel function which is compiled by ARC gcc
+ *
+ * In the later case, we must comply to ARCv2 ABI and handle arguments
+ * and return values accordingly.
+ */
+u8 gen_func_call(u8 *buf, ARC_ADDR func_addr, bool external_func)
+{
+	u8 len = 0;
+
+	/*
+	 * In case of an in-kernel function call, always push the 5th
+	 * argument onto the stack, because that's where the ABI dictates
+	 * it should be found. If the callee doesn't really use it, no harm
+	 * is done. The stack is readjusted either way after the call.
+	 */
+	if (external_func)
+		len += push_r64(BUF(buf, len), BPF_REG_5);
+
+	len += jump_and_link(BUF(buf, len), func_addr);
+
+	if (external_func)
+		len += arc_add_i(BUF(buf, len), ARC_R_SP, ARC_R_SP, ARG5_SIZE);
+
+	return len;
+}
diff --git a/arch/arc/net/bpf_jit_core.c b/arch/arc/net/bpf_jit_core.c
new file mode 100644
index 000000000000..e3628922c24a
--- /dev/null
+++ b/arch/arc/net/bpf_jit_core.c
@@ -0,0 +1,1425 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The back-end-agnostic part of Just-In-Time compiler for eBPF bytecode.
+ *
+ * Copyright (c) 2024 Synopsys Inc.
+ * Author: Shahab Vahedi <shahab@synopsys.com>
+ */
+#include <linux/bug.h>
+#include "bpf_jit.h"
+
+/*
+ * Check for the return value. A pattern used often in this file.
+ * There must be a "ret" variable of type "int" in the scope.
+ */
+#define CHECK_RET(cmd)			\
+	do {				\
+		ret = (cmd);		\
+		if (ret < 0)		\
+			return ret;	\
+	} while (0)
+
+#ifdef ARC_BPF_JIT_DEBUG
+/* Dumps bytes in /var/log/messages at KERN_INFO level (4). */
+static void dump_bytes(const u8 *buf, u32 len, const char *header)
+{
+	u8 line[64];
+	size_t i, j;
+
+	pr_info("-----------------[ %s ]-----------------\n", header);
+
+	for (i = 0, j = 0; i < len; i++) {
+		/* Last input byte? */
+		if (i == len - 1) {
+			j += scnprintf(line + j, 64 - j, "0x%02x", buf[i]);
+			pr_info("%s\n", line);
+			break;
+		}
+		/* End of line? */
+		else if (i % 8 == 7) {
+			j += scnprintf(line + j, 64 - j, "0x%02x", buf[i]);
+			pr_info("%s\n", line);
+			j = 0;
+		} else {
+			j += scnprintf(line + j, 64 - j, "0x%02x, ", buf[i]);
+		}
+	}
+}
+#endif /* ARC_BPF_JIT_DEBUG */
+
+/********************* JIT context ***********************/
+
+/*
+ * buf:		Translated instructions end up here.
+ * len:		The length of whole block in bytes.
+ * index:	The offset at which the _next_ instruction may be put.
+ */
+struct jit_buffer {
+	u8	*buf;
+	u32	len;
+	u32	index;
+};
+
+/*
+ * This is a subset of "struct jit_context" that its information is deemed
+ * necessary for the next extra pass to come.
+ *
+ * bpf_header:	Needed to finally lock the region.
+ * bpf2insn:	Used to find the translation for instructions of interest.
+ *
+ * Things like "jit.buf" and "jit.len" can be retrieved respectively from
+ * "prog->bpf_func" and "prog->jited_len".
+ */
+struct arc_jit_data {
+	struct bpf_binary_header *bpf_header;
+	u32                      *bpf2insn;
+};
+
+/*
+ * The JIT pertinent context that is used by different functions.
+ *
+ * prog:		The current eBPF program being handled.
+ * orig_prog:		The original eBPF program before any possible change.
+ * jit:			The JIT buffer and its length.
+ * bpf_header:		The JITed program header. "jit.buf" points inside it.
+ * emit:		If set, opcodes are written to memory; else, a dry-run.
+ * do_zext:		If true, 32-bit sub-regs must be zero extended.
+ * bpf2insn:		Maps BPF insn indices to their counterparts in jit.buf.
+ * bpf2insn_valid:	Indicates if "bpf2ins" is populated with the mappings.
+ * jit_data:		A piece of memory to transfer data to the next pass.
+ * arc_regs_clobbered:	Each bit status determines if that arc reg is clobbered.
+ * save_blink:		Whether ARC's "blink" register needs to be saved.
+ * frame_size:		Derived from "prog->aux->stack_depth".
+ * epilogue_offset:	Used by early "return"s in the code to jump here.
+ * need_extra_pass:	A forecast if an "extra_pass" will occur.
+ * is_extra_pass:	Indicates if the current pass is an extra pass.
+ * user_bpf_prog:	True, if VM opcodes come from a real program.
+ * blinded:		True if "constant blinding" step returned a new "prog".
+ * success:		Indicates if the whole JIT went OK.
+ */
+struct jit_context {
+	struct bpf_prog			*prog;
+	struct bpf_prog			*orig_prog;
+	struct jit_buffer		jit;
+	struct bpf_binary_header	*bpf_header;
+	bool				emit;
+	bool				do_zext;
+	u32				*bpf2insn;
+	bool				bpf2insn_valid;
+	struct arc_jit_data		*jit_data;
+	u32				arc_regs_clobbered;
+	bool				save_blink;
+	u16				frame_size;
+	u32				epilogue_offset;
+	bool				need_extra_pass;
+	bool				is_extra_pass;
+	bool				user_bpf_prog;
+	bool				blinded;
+	bool				success;
+};
+
+/*
+ * If we're in ARC_BPF_JIT_DEBUG mode and the debug level is right, dump the
+ * input BPF stream. "bpf_jit_dump()" is not fully suited for this purpose.
+ */
+static void vm_dump(const struct bpf_prog *prog)
+{
+#ifdef ARC_BPF_JIT_DEBUG
+	if (bpf_jit_enable > 1)
+		dump_bytes((u8 *)prog->insns, 8 * prog->len, " VM  ");
+#endif
+}
+
+/*
+ * If the right level of debug is set, dump the bytes. There are 2 variants
+ * of this function:
+ *
+ * 1. Use the standard bpf_jit_dump() which is meant only for JITed code.
+ * 2. Use the dump_bytes() to match its "vm_dump()" instance.
+ */
+static void jit_dump(const struct jit_context *ctx)
+{
+#ifdef ARC_BPF_JIT_DEBUG
+	u8 header[8];
+#endif
+	const int pass = ctx->is_extra_pass ? 2 : 1;
+
+	if (bpf_jit_enable <= 1 || !ctx->prog->jited)
+		return;
+
+#ifdef ARC_BPF_JIT_DEBUG
+	scnprintf(header, sizeof(header), "JIT:%d", pass);
+	dump_bytes(ctx->jit.buf, ctx->jit.len, header);
+	pr_info("\n");
+#else
+	bpf_jit_dump(ctx->prog->len, ctx->jit.len, pass, ctx->jit.buf);
+#endif
+}
+
+/* Initialise the context so there's no garbage. */
+static int jit_ctx_init(struct jit_context *ctx, struct bpf_prog *prog)
+{
+	memset(ctx, 0, sizeof(*ctx));
+
+	ctx->orig_prog = prog;
+
+	/* If constant blinding was requested but failed, scram. */
+	ctx->prog = bpf_jit_blind_constants(prog);
+	if (IS_ERR(ctx->prog))
+		return PTR_ERR(ctx->prog);
+	ctx->blinded = (ctx->prog != ctx->orig_prog);
+
+	/* If the verifier doesn't zero-extend, then we have to do it. */
+	ctx->do_zext = !ctx->prog->aux->verifier_zext;
+
+	ctx->is_extra_pass = ctx->prog->jited;
+	ctx->user_bpf_prog = ctx->prog->is_func;
+
+	return 0;
+}
+
+/*
+ * Only after the first iteration of normal pass (the dry-run),
+ * there are valid offsets in ctx->bpf2insn array.
+ */
+static inline bool offsets_available(const struct jit_context *ctx)
+{
+	return ctx->bpf2insn_valid;
+}
+
+/*
+ * "*mem" should be freed when there is no "extra pass" to come,
+ * or the compilation terminated abruptly. A few of such memory
+ * allocations are: ctx->jit_data and ctx->bpf2insn.
+ */
+static inline void maybe_free(struct jit_context *ctx, void **mem)
+{
+	if (*mem) {
+		if (!ctx->success || !ctx->need_extra_pass) {
+			kfree(*mem);
+			*mem = NULL;
+		}
+	}
+}
+
+/*
+ * Free memories based on the status of the context.
+ *
+ * A note about "bpf_header": On successful runs, "bpf_header" is
+ * not freed, because "jit.buf", a sub-array of it, is returned as
+ * the "bpf_func". However, "bpf_header" is lost and nothing points
+ * to it. This should not cause a leakage, because apparently
+ * "bpf_header" can be revived by "bpf_jit_binary_hdr()". This is
+ * how "bpf_jit_free()" in "kernel/bpf/core.c" releases the memory.
+ */
+static void jit_ctx_cleanup(struct jit_context *ctx)
+{
+	if (ctx->blinded) {
+		/* if all went well, release the orig_prog. */
+		if (ctx->success)
+			bpf_jit_prog_release_other(ctx->prog, ctx->orig_prog);
+		else
+			bpf_jit_prog_release_other(ctx->orig_prog, ctx->prog);
+	}
+
+	maybe_free(ctx, (void **)&ctx->bpf2insn);
+	maybe_free(ctx, (void **)&ctx->jit_data);
+
+	if (!ctx->bpf2insn)
+		ctx->bpf2insn_valid = false;
+
+	/* Freeing "bpf_header" is enough. "jit.buf" is a sub-array of it. */
+	if (!ctx->success && ctx->bpf_header) {
+		bpf_jit_binary_free(ctx->bpf_header);
+		ctx->bpf_header = NULL;
+		ctx->jit.buf    = NULL;
+		ctx->jit.index  = 0;
+		ctx->jit.len    = 0;
+	}
+
+	ctx->emit = false;
+	ctx->do_zext = false;
+}
+
+/*
+ * Analyse the register usage and record the frame size.
+ * The register usage is determined by consulting the back-end.
+ */
+static void analyze_reg_usage(struct jit_context *ctx)
+{
+	size_t i;
+	u32 usage = 0;
+	const struct bpf_insn *insn = ctx->prog->insnsi;
+
+	for (i = 0; i < ctx->prog->len; i++) {
+		u8 bpf_reg;
+		bool call;
+
+		bpf_reg = insn[i].dst_reg;
+		call = (insn[i].code == (BPF_JMP | BPF_CALL)) ? true : false;
+		usage |= mask_for_used_regs(bpf_reg, call);
+	}
+
+	ctx->arc_regs_clobbered = usage;
+	ctx->frame_size = ctx->prog->aux->stack_depth;
+}
+
+/* Verify that no instruction will be emitted when there is no buffer. */
+static inline int jit_buffer_check(const struct jit_context *ctx)
+{
+	if (ctx->emit) {
+		if (!ctx->jit.buf) {
+			pr_err("bpf-jit: inconsistence state; no "
+			       "buffer to emit instructions.\n");
+			return -EINVAL;
+		} else if (ctx->jit.index > ctx->jit.len) {
+			pr_err("bpf-jit: estimated JIT length is less "
+			       "than the emitted instructions.\n");
+			return -EFAULT;
+		}
+	}
+	return 0;
+}
+
+/* On a dry-run (emit=false), "jit.len" is growing gradually. */
+static inline void jit_buffer_update(struct jit_context *ctx, u32 n)
+{
+	if (!ctx->emit)
+		ctx->jit.len += n;
+	else
+		ctx->jit.index += n;
+}
+
+/* Based on "emit", determine the address where instructions are emitted. */
+static inline u8 *effective_jit_buf(const struct jit_context *ctx)
+{
+	return ctx->emit ? (ctx->jit.buf + ctx->jit.index) : NULL;
+}
+
+/* Prologue based on context variables set by "analyze_reg_usage()". */
+static int handle_prologue(struct jit_context *ctx)
+{
+	int ret;
+	u8 *buf = effective_jit_buf(ctx);
+	u32 len = 0;
+
+	CHECK_RET(jit_buffer_check(ctx));
+
+	len = arc_prologue(buf, ctx->arc_regs_clobbered, ctx->frame_size);
+	jit_buffer_update(ctx, len);
+
+	return 0;
+}
+
+/* The counter part for "handle_prologue()". */
+static int handle_epilogue(struct jit_context *ctx)
+{
+	int ret;
+	u8 *buf = effective_jit_buf(ctx);
+	u32 len = 0;
+
+	CHECK_RET(jit_buffer_check(ctx));
+
+	len = arc_epilogue(buf, ctx->arc_regs_clobbered, ctx->frame_size);
+	jit_buffer_update(ctx, len);
+
+	return 0;
+}
+
+/* Tell which number of the BPF instruction we are dealing with. */
+static inline s32 get_index_for_insn(const struct jit_context *ctx,
+				     const struct bpf_insn *insn)
+{
+	return (insn - ctx->prog->insnsi);
+}
+
+/*
+ * In most of the cases, the "offset" is read from "insn->off". However,
+ * if it is an unconditional BPF_JMP32, then it comes from "insn->imm".
+ *
+ * (Courtesy of "cpu=v4" support)
+ */
+static inline s32 get_offset(const struct bpf_insn *insn)
+{
+	if ((BPF_CLASS(insn->code) == BPF_JMP32) &&
+	    (BPF_OP(insn->code) == BPF_JA))
+		return insn->imm;
+	else
+		return insn->off;
+}
+
+/*
+ * Determine to which number of the BPF instruction we're jumping to.
+ *
+ * The "offset" is interpreted as the "number" of BPF instructions
+ * from the _next_ BPF instruction. e.g.:
+ *
+ *  4 means 4 instructions after  the next insn
+ *  0 means 0 instructions after  the next insn -> fallthrough.
+ * -1 means 1 instruction  before the next insn -> jmp to current insn.
+ *
+ *  Another way to look at this, "offset" is the number of instructions
+ *  that exist between the current instruction and the target instruction.
+ *
+ *  It is worth noting that a "mov r,i64", which is 16-byte long, is
+ *  treated as two instructions long, therefore "offset" needn't be
+ *  treated specially for those. Everything is uniform.
+ */
+static inline s32 get_target_index_for_insn(const struct jit_context *ctx,
+					    const struct bpf_insn *insn)
+{
+	return (get_index_for_insn(ctx, insn) + 1) + get_offset(insn);
+}
+
+/* Is there an immediate operand encoded in the "insn"? */
+static inline bool has_imm(const struct bpf_insn *insn)
+{
+	return BPF_SRC(insn->code) == BPF_K;
+}
+
+/* Is the last BPF instruction? */
+static inline bool is_last_insn(const struct bpf_prog *prog, u32 idx)
+{
+	return idx == (prog->len - 1);
+}
+
+/*
+ * Invocation of this function, conditionally signals the need for
+ * an extra pass. The conditions that must be met are:
+ *
+ * 1. The current pass itself shouldn't be an extra pass.
+ * 2. The stream of bytes being JITed must come from a user program.
+ */
+static inline void set_need_for_extra_pass(struct jit_context *ctx)
+{
+	if (!ctx->is_extra_pass)
+		ctx->need_extra_pass = ctx->user_bpf_prog;
+}
+
+/*
+ * Check if the "size" is valid and then transfer the control to
+ * the back-end for the swap.
+ */
+static int handle_swap(u8 *buf, u8 rd, u8 size, u8 endian,
+		       bool force, bool do_zext, u8 *len)
+{
+	/* Sanity check on the size. */
+	switch (size) {
+	case 16:
+	case 32:
+	case 64:
+		break;
+	default:
+		pr_err("bpf-jit: invalid size for swap.\n");
+		return -EINVAL;
+	}
+
+	*len = gen_swap(buf, rd, size, endian, force, do_zext);
+
+	return 0;
+}
+
+/* Checks if the (instruction) index is in valid range. */
+static inline bool check_insn_idx_valid(const struct jit_context *ctx,
+					const s32 idx)
+{
+	return (idx >= 0 && idx < ctx->prog->len);
+}
+
+/*
+ * Decouple the back-end from BPF by converting BPF conditions
+ * to internal enum. ARC_CC_* start from 0 and are used as index
+ * to an array. BPF_J* usage must end after this conversion.
+ */
+static int bpf_cond_to_arc(const u8 op, u8 *arc_cc)
+{
+	switch (op) {
+	case BPF_JA:
+		*arc_cc = ARC_CC_AL;
+		break;
+	case BPF_JEQ:
+		*arc_cc = ARC_CC_EQ;
+		break;
+	case BPF_JGT:
+		*arc_cc = ARC_CC_UGT;
+		break;
+	case BPF_JGE:
+		*arc_cc = ARC_CC_UGE;
+		break;
+	case BPF_JSET:
+		*arc_cc = ARC_CC_SET;
+		break;
+	case BPF_JNE:
+		*arc_cc = ARC_CC_NE;
+		break;
+	case BPF_JSGT:
+		*arc_cc = ARC_CC_SGT;
+		break;
+	case BPF_JSGE:
+		*arc_cc = ARC_CC_SGE;
+		break;
+	case BPF_JLT:
+		*arc_cc = ARC_CC_ULT;
+		break;
+	case BPF_JLE:
+		*arc_cc = ARC_CC_ULE;
+		break;
+	case BPF_JSLT:
+		*arc_cc = ARC_CC_SLT;
+		break;
+	case BPF_JSLE:
+		*arc_cc = ARC_CC_SLE;
+		break;
+	default:
+		pr_err("bpf-jit: can't handle condition 0x%02X\n", op);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/*
+ * Check a few things for a supposedly "jump" instruction:
+ *
+ * 0. "insn" is a "jump" instruction, but not the "call/exit" variant.
+ * 1. The current "insn" index is in valid range.
+ * 2. The index of target instruction is in valid range.
+ */
+static int check_bpf_jump(const struct jit_context *ctx,
+			  const struct bpf_insn *insn)
+{
+	const u8 class = BPF_CLASS(insn->code);
+	const u8 op = BPF_OP(insn->code);
+
+	/* Must be a jmp(32) instruction that is not a "call/exit". */
+	if ((class != BPF_JMP && class != BPF_JMP32) ||
+	    (op == BPF_CALL || op == BPF_EXIT)) {
+		pr_err("bpf-jit: not a jump instruction.\n");
+		return -EINVAL;
+	}
+
+	if (!check_insn_idx_valid(ctx, get_index_for_insn(ctx, insn))) {
+		pr_err("bpf-jit: the bpf jump insn is not in prog.\n");
+		return -EINVAL;
+	}
+
+	if (!check_insn_idx_valid(ctx, get_target_index_for_insn(ctx, insn))) {
+		pr_err("bpf-jit: bpf jump label is out of range.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Based on input "insn", consult "ctx->bpf2insn" to get the
+ * related index (offset) of the translation in JIT stream.
+ */
+static u32 get_curr_jit_off(const struct jit_context *ctx,
+			    const struct bpf_insn *insn)
+{
+	const s32 idx = get_index_for_insn(ctx, insn);
+#ifdef ARC_BPF_JIT_DEBUG
+	BUG_ON(!offsets_available(ctx) || !check_insn_idx_valid(ctx, idx));
+#endif
+	return ctx->bpf2insn[idx];
+}
+
+/*
+ * The input "insn" must be a jump instruction.
+ *
+ * Based on input "insn", consult "ctx->bpf2insn" to get the
+ * related JIT index (offset) of "target instruction" that
+ * "insn" would jump to.
+ */
+static u32 get_targ_jit_off(const struct jit_context *ctx,
+			    const struct bpf_insn *insn)
+{
+	const s32 tidx = get_target_index_for_insn(ctx, insn);
+#ifdef ARC_BPF_JIT_DEBUG
+	BUG_ON(!offsets_available(ctx) || !check_insn_idx_valid(ctx, tidx));
+#endif
+	return ctx->bpf2insn[tidx];
+}
+
+/*
+ * This function will return 0 for a feasible jump.
+ *
+ * Consult the back-end to check if it finds it feasible to emit
+ * the necessary instructions based on "cond" and the displacement
+ * between the "from_off" and the "to_off".
+ */
+static int feasible_jit_jump(u32 from_off, u32 to_off, u8 cond, bool j32)
+{
+	int ret = 0;
+
+	if (j32) {
+		if (!check_jmp_32(from_off, to_off, cond))
+			ret = -EFAULT;
+	} else {
+		if (!check_jmp_64(from_off, to_off, cond))
+			ret = -EFAULT;
+	}
+
+	if (ret != 0)
+		pr_err("bpf-jit: the JIT displacement is not OK.\n");
+
+	return ret;
+}
+
+/*
+ * This jump handler performs the following steps:
+ *
+ * 1. Compute ARC's internal condition code from BPF's
+ * 2. Determine the bitness of the operation (32 vs. 64)
+ * 3. Sanity check on BPF stream
+ * 4. Sanity check on what is supposed to be JIT's displacement
+ * 5. And finally, emit the necessary instructions
+ *
+ * The last two steps are performed through the back-end.
+ * The value of steps 1 and 2 are necessary inputs for the back-end.
+ */
+static int handle_jumps(const struct jit_context *ctx,
+			const struct bpf_insn *insn,
+			u8 *len)
+{
+	u8 cond;
+	int ret = 0;
+	u8 *buf = effective_jit_buf(ctx);
+	const bool j32 = (BPF_CLASS(insn->code) == BPF_JMP32) ? true : false;
+	const u8 rd = insn->dst_reg;
+	u8 rs = insn->src_reg;
+	u32 curr_off = 0, targ_off = 0;
+
+	*len = 0;
+
+	/* Map the BPF condition to internal enum. */
+	CHECK_RET(bpf_cond_to_arc(BPF_OP(insn->code), &cond));
+
+	/* Sanity check on the BPF byte stream. */
+	CHECK_RET(check_bpf_jump(ctx, insn));
+
+	/*
+	 * Move the immediate into a temporary register _now_ for 2 reasons:
+	 *
+	 * 1. "gen_jmp_{32,64}()" deal with operands in registers.
+	 *
+	 * 2. The "len" parameter will grow so that the current jit offset
+	 *    (curr_off) will have increased to a point where the necessary
+	 *    instructions can be inserted by "gen_jmp_{32,64}()".
+	 */
+	if (has_imm(insn) && cond != ARC_CC_AL) {
+		if (j32) {
+			*len += mov_r32_i32(BUF(buf, *len), JIT_REG_TMP,
+					    insn->imm);
+		} else {
+			*len += mov_r64_i32(BUF(buf, *len), JIT_REG_TMP,
+					    insn->imm);
+		}
+		rs = JIT_REG_TMP;
+	}
+
+	/* If the offsets are known, check if the branch can occur. */
+	if (offsets_available(ctx)) {
+		curr_off = get_curr_jit_off(ctx, insn) + *len;
+		targ_off = get_targ_jit_off(ctx, insn);
+
+		/* Sanity check on the back-end side. */
+		CHECK_RET(feasible_jit_jump(curr_off, targ_off, cond, j32));
+	}
+
+	if (j32) {
+		*len += gen_jmp_32(BUF(buf, *len), rd, rs, cond,
+				   curr_off, targ_off);
+	} else {
+		*len += gen_jmp_64(BUF(buf, *len), rd, rs, cond,
+				   curr_off, targ_off);
+	}
+
+	return ret;
+}
+
+/* Jump to translated epilogue address. */
+static int handle_jmp_epilogue(struct jit_context *ctx,
+			       const struct bpf_insn *insn, u8 *len)
+{
+	u8 *buf = effective_jit_buf(ctx);
+	u32 curr_off = 0, epi_off = 0;
+
+	/* Check the offset only if the data is available. */
+	if (offsets_available(ctx)) {
+		curr_off = get_curr_jit_off(ctx, insn);
+		epi_off = ctx->epilogue_offset;
+
+		if (!check_jmp_64(curr_off, epi_off, ARC_CC_AL)) {
+			pr_err("bpf-jit: epilogue offset is not valid.\n");
+			return -EINVAL;
+		}
+	}
+
+	/* Jump to "epilogue offset" (rd and rs don't matter). */
+	*len = gen_jmp_64(buf, 0, 0, ARC_CC_AL, curr_off, epi_off);
+
+	return 0;
+}
+
+/* Try to get the resolved address and generate the instructions. */
+static int handle_call(struct jit_context *ctx,
+		       const struct bpf_insn *insn,
+		       u8 *len)
+{
+	int  ret;
+	bool in_kernel_func, fixed = false;
+	u64  addr = 0;
+	u8  *buf = effective_jit_buf(ctx);
+
+	ret = bpf_jit_get_func_addr(ctx->prog, insn, ctx->is_extra_pass,
+				    &addr, &fixed);
+	if (ret < 0) {
+		pr_err("bpf-jit: can't get the address for call.\n");
+		return ret;
+	}
+	in_kernel_func = (fixed ? true : false);
+
+	/* No valuable address retrieved (yet). */
+	if (!fixed && !addr)
+		set_need_for_extra_pass(ctx);
+
+	*len = gen_func_call(buf, (ARC_ADDR)addr, in_kernel_func);
+
+	if (insn->src_reg != BPF_PSEUDO_CALL) {
+		/* Assigning ABI's return reg to JIT's return reg. */
+		*len += arc_to_bpf_return(BUF(buf, *len));
+	}
+
+	return 0;
+}
+
+/*
+ * Try to generate instructions for loading a 64-bit immediate.
+ * These sort of instructions are usually associated with the 64-bit
+ * relocations: R_BPF_64_64. Therefore, signal the need for an extra
+ * pass if the circumstances are right.
+ */
+static int handle_ld_imm64(struct jit_context *ctx,
+			   const struct bpf_insn *insn,
+			   u8 *len)
+{
+	const s32 idx = get_index_for_insn(ctx, insn);
+	u8 *buf = effective_jit_buf(ctx);
+
+	/* We're about to consume 2 VM instructions. */
+	if (is_last_insn(ctx->prog, idx)) {
+		pr_err("bpf-jit: need more data for 64-bit immediate.\n");
+		return -EINVAL;
+	}
+
+	*len = mov_r64_i64(buf, insn->dst_reg, insn->imm, (insn + 1)->imm);
+
+	if (bpf_pseudo_func(insn))
+		set_need_for_extra_pass(ctx);
+
+	return 0;
+}
+
+/*
+ * Handles one eBPF instruction at a time. To make this function faster,
+ * it does not call "jit_buffer_check()". Else, it would call it for every
+ * instruction. As a result, it should not be invoked directly. Only
+ * "handle_body()", that has already executed the "check", may call this
+ * function.
+ *
+ * If the "ret" value is negative, something has went wrong. Else,
+ * it mostly holds the value 0 and rarely 1. Number 1 signals
+ * the loop in "handle_body()" to skip the next instruction, because
+ * it has been consumed as part of a 64-bit immediate value.
+ */
+static int handle_insn(struct jit_context *ctx, u32 idx)
+{
+	const struct bpf_insn *insn = &ctx->prog->insnsi[idx];
+	const u8  code = insn->code;
+	const u8  dst  = insn->dst_reg;
+	const u8  src  = insn->src_reg;
+	const s16 off  = insn->off;
+	const s32 imm  = insn->imm;
+	u8 *buf = effective_jit_buf(ctx);
+	u8  len = 0;
+	int ret = 0;
+
+	switch (code) {
+	/* dst += src (32-bit) */
+	case BPF_ALU | BPF_ADD | BPF_X:
+		len = add_r32(buf, dst, src);
+		break;
+	/* dst += imm (32-bit) */
+	case BPF_ALU | BPF_ADD | BPF_K:
+		len = add_r32_i32(buf, dst, imm);
+		break;
+	/* dst -= src (32-bit) */
+	case BPF_ALU | BPF_SUB | BPF_X:
+		len = sub_r32(buf, dst, src);
+		break;
+	/* dst -= imm (32-bit) */
+	case BPF_ALU | BPF_SUB | BPF_K:
+		len = sub_r32_i32(buf, dst, imm);
+		break;
+	/* dst = -dst (32-bit) */
+	case BPF_ALU | BPF_NEG:
+		len = neg_r32(buf, dst);
+		break;
+	/* dst *= src (32-bit) */
+	case BPF_ALU | BPF_MUL | BPF_X:
+		len = mul_r32(buf, dst, src);
+		break;
+	/* dst *= imm (32-bit) */
+	case BPF_ALU | BPF_MUL | BPF_K:
+		len = mul_r32_i32(buf, dst, imm);
+		break;
+	/* dst /= src (32-bit) */
+	case BPF_ALU | BPF_DIV | BPF_X:
+		len = div_r32(buf, dst, src, off == 1);
+		break;
+	/* dst /= imm (32-bit) */
+	case BPF_ALU | BPF_DIV | BPF_K:
+		len = div_r32_i32(buf, dst, imm, off == 1);
+		break;
+	/* dst %= src (32-bit) */
+	case BPF_ALU | BPF_MOD | BPF_X:
+		len = mod_r32(buf, dst, src, off == 1);
+		break;
+	/* dst %= imm (32-bit) */
+	case BPF_ALU | BPF_MOD | BPF_K:
+		len = mod_r32_i32(buf, dst, imm, off == 1);
+		break;
+	/* dst &= src (32-bit) */
+	case BPF_ALU | BPF_AND | BPF_X:
+		len = and_r32(buf, dst, src);
+		break;
+	/* dst &= imm (32-bit) */
+	case BPF_ALU | BPF_AND | BPF_K:
+		len = and_r32_i32(buf, dst, imm);
+		break;
+	/* dst |= src (32-bit) */
+	case BPF_ALU | BPF_OR | BPF_X:
+		len = or_r32(buf, dst, src);
+		break;
+	/* dst |= imm (32-bit) */
+	case BPF_ALU | BPF_OR | BPF_K:
+		len = or_r32_i32(buf, dst, imm);
+		break;
+	/* dst ^= src (32-bit) */
+	case BPF_ALU | BPF_XOR | BPF_X:
+		len = xor_r32(buf, dst, src);
+		break;
+	/* dst ^= imm (32-bit) */
+	case BPF_ALU | BPF_XOR | BPF_K:
+		len = xor_r32_i32(buf, dst, imm);
+		break;
+	/* dst <<= src (32-bit) */
+	case BPF_ALU | BPF_LSH | BPF_X:
+		len = lsh_r32(buf, dst, src);
+		break;
+	/* dst <<= imm (32-bit) */
+	case BPF_ALU | BPF_LSH | BPF_K:
+		len = lsh_r32_i32(buf, dst, imm);
+		break;
+	/* dst >>= src (32-bit) [unsigned] */
+	case BPF_ALU | BPF_RSH | BPF_X:
+		len = rsh_r32(buf, dst, src);
+		break;
+	/* dst >>= imm (32-bit) [unsigned] */
+	case BPF_ALU | BPF_RSH | BPF_K:
+		len = rsh_r32_i32(buf, dst, imm);
+		break;
+	/* dst >>= src (32-bit) [signed] */
+	case BPF_ALU | BPF_ARSH | BPF_X:
+		len = arsh_r32(buf, dst, src);
+		break;
+	/* dst >>= imm (32-bit) [signed] */
+	case BPF_ALU | BPF_ARSH | BPF_K:
+		len = arsh_r32_i32(buf, dst, imm);
+		break;
+	/* dst = src (32-bit) */
+	case BPF_ALU | BPF_MOV | BPF_X:
+		len = mov_r32(buf, dst, src, (u8)off);
+		break;
+	/* dst = imm32 (32-bit) */
+	case BPF_ALU | BPF_MOV | BPF_K:
+		len = mov_r32_i32(buf, dst, imm);
+		break;
+	/* dst = swap(dst) */
+	case BPF_ALU   | BPF_END | BPF_FROM_LE:
+	case BPF_ALU   | BPF_END | BPF_FROM_BE:
+	case BPF_ALU64 | BPF_END | BPF_FROM_LE: {
+		CHECK_RET(handle_swap(buf, dst, imm, BPF_SRC(code),
+				      BPF_CLASS(code) == BPF_ALU64,
+				      ctx->do_zext, &len));
+		break;
+	}
+	/* dst += src (64-bit) */
+	case BPF_ALU64 | BPF_ADD | BPF_X:
+		len = add_r64(buf, dst, src);
+		break;
+	/* dst += imm32 (64-bit) */
+	case BPF_ALU64 | BPF_ADD | BPF_K:
+		len = add_r64_i32(buf, dst, imm);
+		break;
+	/* dst -= src (64-bit) */
+	case BPF_ALU64 | BPF_SUB | BPF_X:
+		len = sub_r64(buf, dst, src);
+		break;
+	/* dst -= imm32 (64-bit) */
+	case BPF_ALU64 | BPF_SUB | BPF_K:
+		len = sub_r64_i32(buf, dst, imm);
+		break;
+	/* dst = -dst (64-bit) */
+	case BPF_ALU64 | BPF_NEG:
+		len = neg_r64(buf, dst);
+		break;
+	/* dst *= src (64-bit) */
+	case BPF_ALU64 | BPF_MUL | BPF_X:
+		len = mul_r64(buf, dst, src);
+		break;
+	/* dst *= imm32 (64-bit) */
+	case BPF_ALU64 | BPF_MUL | BPF_K:
+		len = mul_r64_i32(buf, dst, imm);
+		break;
+	/* dst &= src (64-bit) */
+	case BPF_ALU64 | BPF_AND | BPF_X:
+		len = and_r64(buf, dst, src);
+		break;
+	/* dst &= imm32 (64-bit) */
+	case BPF_ALU64 | BPF_AND | BPF_K:
+		len = and_r64_i32(buf, dst, imm);
+		break;
+	/* dst |= src (64-bit) */
+	case BPF_ALU64 | BPF_OR | BPF_X:
+		len = or_r64(buf, dst, src);
+		break;
+	/* dst |= imm32 (64-bit) */
+	case BPF_ALU64 | BPF_OR | BPF_K:
+		len = or_r64_i32(buf, dst, imm);
+		break;
+	/* dst ^= src (64-bit) */
+	case BPF_ALU64 | BPF_XOR | BPF_X:
+		len = xor_r64(buf, dst, src);
+		break;
+	/* dst ^= imm32 (64-bit) */
+	case BPF_ALU64 | BPF_XOR | BPF_K:
+		len = xor_r64_i32(buf, dst, imm);
+		break;
+	/* dst <<= src (64-bit) */
+	case BPF_ALU64 | BPF_LSH | BPF_X:
+		len = lsh_r64(buf, dst, src);
+		break;
+	/* dst <<= imm32 (64-bit) */
+	case BPF_ALU64 | BPF_LSH | BPF_K:
+		len = lsh_r64_i32(buf, dst, imm);
+		break;
+	/* dst >>= src (64-bit) [unsigned] */
+	case BPF_ALU64 | BPF_RSH | BPF_X:
+		len = rsh_r64(buf, dst, src);
+		break;
+	/* dst >>= imm32 (64-bit) [unsigned] */
+	case BPF_ALU64 | BPF_RSH | BPF_K:
+		len = rsh_r64_i32(buf, dst, imm);
+		break;
+	/* dst >>= src (64-bit) [signed] */
+	case BPF_ALU64 | BPF_ARSH | BPF_X:
+		len = arsh_r64(buf, dst, src);
+		break;
+	/* dst >>= imm32 (64-bit) [signed] */
+	case BPF_ALU64 | BPF_ARSH | BPF_K:
+		len = arsh_r64_i32(buf, dst, imm);
+		break;
+	/* dst = src (64-bit) */
+	case BPF_ALU64 | BPF_MOV | BPF_X:
+		len = mov_r64(buf, dst, src, (u8)off);
+		break;
+	/* dst = imm32 (sign extend to 64-bit) */
+	case BPF_ALU64 | BPF_MOV | BPF_K:
+		len = mov_r64_i32(buf, dst, imm);
+		break;
+	/* dst = imm64 */
+	case BPF_LD | BPF_DW | BPF_IMM:
+		CHECK_RET(handle_ld_imm64(ctx, insn, &len));
+		/* Tell the loop to skip the next instruction. */
+		ret = 1;
+		break;
+	/* dst = *(size *)(src + off) */
+	case BPF_LDX | BPF_MEM | BPF_W:
+	case BPF_LDX | BPF_MEM | BPF_H:
+	case BPF_LDX | BPF_MEM | BPF_B:
+	case BPF_LDX | BPF_MEM | BPF_DW:
+		len = load_r(buf, dst, src, off, BPF_SIZE(code), false);
+		break;
+	case BPF_LDX | BPF_MEMSX | BPF_W:
+	case BPF_LDX | BPF_MEMSX | BPF_H:
+	case BPF_LDX | BPF_MEMSX | BPF_B:
+		len = load_r(buf, dst, src, off, BPF_SIZE(code), true);
+		break;
+	/* *(size *)(dst + off) = src */
+	case BPF_STX | BPF_MEM | BPF_W:
+	case BPF_STX | BPF_MEM | BPF_H:
+	case BPF_STX | BPF_MEM | BPF_B:
+	case BPF_STX | BPF_MEM | BPF_DW:
+		len = store_r(buf, src, dst, off, BPF_SIZE(code));
+		break;
+	case BPF_ST | BPF_MEM | BPF_W:
+	case BPF_ST | BPF_MEM | BPF_H:
+	case BPF_ST | BPF_MEM | BPF_B:
+	case BPF_ST | BPF_MEM | BPF_DW:
+		len = store_i(buf, imm, dst, off, BPF_SIZE(code));
+		break;
+	case BPF_JMP   | BPF_JA:
+	case BPF_JMP   | BPF_JEQ  | BPF_X:
+	case BPF_JMP   | BPF_JEQ  | BPF_K:
+	case BPF_JMP   | BPF_JNE  | BPF_X:
+	case BPF_JMP   | BPF_JNE  | BPF_K:
+	case BPF_JMP   | BPF_JSET | BPF_X:
+	case BPF_JMP   | BPF_JSET | BPF_K:
+	case BPF_JMP   | BPF_JGT  | BPF_X:
+	case BPF_JMP   | BPF_JGT  | BPF_K:
+	case BPF_JMP   | BPF_JGE  | BPF_X:
+	case BPF_JMP   | BPF_JGE  | BPF_K:
+	case BPF_JMP   | BPF_JSGT | BPF_X:
+	case BPF_JMP   | BPF_JSGT | BPF_K:
+	case BPF_JMP   | BPF_JSGE | BPF_X:
+	case BPF_JMP   | BPF_JSGE | BPF_K:
+	case BPF_JMP   | BPF_JLT  | BPF_X:
+	case BPF_JMP   | BPF_JLT  | BPF_K:
+	case BPF_JMP   | BPF_JLE  | BPF_X:
+	case BPF_JMP   | BPF_JLE  | BPF_K:
+	case BPF_JMP   | BPF_JSLT | BPF_X:
+	case BPF_JMP   | BPF_JSLT | BPF_K:
+	case BPF_JMP   | BPF_JSLE | BPF_X:
+	case BPF_JMP   | BPF_JSLE | BPF_K:
+	case BPF_JMP32 | BPF_JA:
+	case BPF_JMP32 | BPF_JEQ  | BPF_X:
+	case BPF_JMP32 | BPF_JEQ  | BPF_K:
+	case BPF_JMP32 | BPF_JNE  | BPF_X:
+	case BPF_JMP32 | BPF_JNE  | BPF_K:
+	case BPF_JMP32 | BPF_JSET | BPF_X:
+	case BPF_JMP32 | BPF_JSET | BPF_K:
+	case BPF_JMP32 | BPF_JGT  | BPF_X:
+	case BPF_JMP32 | BPF_JGT  | BPF_K:
+	case BPF_JMP32 | BPF_JGE  | BPF_X:
+	case BPF_JMP32 | BPF_JGE  | BPF_K:
+	case BPF_JMP32 | BPF_JSGT | BPF_X:
+	case BPF_JMP32 | BPF_JSGT | BPF_K:
+	case BPF_JMP32 | BPF_JSGE | BPF_X:
+	case BPF_JMP32 | BPF_JSGE | BPF_K:
+	case BPF_JMP32 | BPF_JLT  | BPF_X:
+	case BPF_JMP32 | BPF_JLT  | BPF_K:
+	case BPF_JMP32 | BPF_JLE  | BPF_X:
+	case BPF_JMP32 | BPF_JLE  | BPF_K:
+	case BPF_JMP32 | BPF_JSLT | BPF_X:
+	case BPF_JMP32 | BPF_JSLT | BPF_K:
+	case BPF_JMP32 | BPF_JSLE | BPF_X:
+	case BPF_JMP32 | BPF_JSLE | BPF_K:
+		CHECK_RET(handle_jumps(ctx, insn, &len));
+		break;
+	case BPF_JMP | BPF_CALL:
+		CHECK_RET(handle_call(ctx, insn, &len));
+		break;
+
+	case BPF_JMP | BPF_EXIT:
+		/* If this is the last instruction, epilogue will follow. */
+		if (is_last_insn(ctx->prog, idx))
+			break;
+		CHECK_RET(handle_jmp_epilogue(ctx, insn, &len));
+		break;
+	default:
+		pr_err("bpf-jit: can't handle instruction code 0x%02X\n", code);
+		return -EOPNOTSUPP;
+	}
+
+	if (BPF_CLASS(code) == BPF_ALU) {
+		/*
+		 * Skip the "swap" instructions. Even 64-bit swaps are of type
+		 * BPF_ALU (and not BPF_ALU64). Therefore, for the swaps, one
+		 * has to look at the "size" of the operations rather than the
+		 * ALU type. "gen_swap()" specifically takes care of that.
+		 */
+		if (BPF_OP(code) != BPF_END && ctx->do_zext)
+			len += zext(BUF(buf, len), dst);
+	}
+
+	jit_buffer_update(ctx, len);
+
+	return ret;
+}
+
+static int handle_body(struct jit_context *ctx)
+{
+	int ret;
+	bool populate_bpf2insn = false;
+	const struct bpf_prog *prog = ctx->prog;
+
+	CHECK_RET(jit_buffer_check(ctx));
+
+	/*
+	 * Record the mapping for the instructions during the dry-run.
+	 * Doing it this way allows us to have the mapping ready for
+	 * the jump instructions during the real compilation phase.
+	 */
+	if (!ctx->emit)
+		populate_bpf2insn = true;
+
+	for (u32 i = 0; i < prog->len; i++) {
+		/* During the dry-run, jit.len grows gradually per BPF insn. */
+		if (populate_bpf2insn)
+			ctx->bpf2insn[i] = ctx->jit.len;
+
+		CHECK_RET(handle_insn(ctx, i));
+		if (ret > 0) {
+			/* "ret" is 1 if two (64-bit) chunks were consumed. */
+			ctx->bpf2insn[i + 1] = ctx->bpf2insn[i];
+			i++;
+		}
+	}
+
+	/* If bpf2insn had to be populated, then it is done at this point. */
+	if (populate_bpf2insn)
+		ctx->bpf2insn_valid = true;
+
+	return 0;
+}
+
+/*
+ * Initialize the memory with "unimp_s" which is the mnemonic for
+ * "unimplemented" instruction and always raises an exception.
+ *
+ * The instruction is 2 bytes. If "size" is odd, there is not much
+ * that can be done about the last byte in "area". Because, the
+ * CPU always fetches instructions in two bytes. Therefore, the
+ * byte beyond the last one is going to accompany it during a
+ * possible fetch. In the most likely case of a little endian
+ * system, that beyond-byte will become the major opcode and
+ * we have no control over its initialisation.
+ */
+static void fill_ill_insn(void *area, unsigned int size)
+{
+	const u16 unimp_s = 0x79e0;
+
+	if (size & 1) {
+		*((u8 *)area + (size - 1)) = 0xff;
+		size -= 1;
+	}
+
+	memset16(area, unimp_s, size >> 1);
+}
+
+/* Piece of memory that can be allocated at the beginning of jit_prepare(). */
+static int jit_prepare_early_mem_alloc(struct jit_context *ctx)
+{
+	ctx->bpf2insn = kcalloc(ctx->prog->len, sizeof(ctx->jit.len),
+				GFP_KERNEL);
+
+	if (!ctx->bpf2insn) {
+		pr_err("bpf-jit: could not allocate memory for "
+		       "mapping of the instructions.\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/*
+ * Memory allocations that rely on parameters known at the end of
+ * jit_prepare().
+ */
+static int jit_prepare_final_mem_alloc(struct jit_context *ctx)
+{
+	const size_t alignment = sizeof(u32);
+
+	ctx->bpf_header = bpf_jit_binary_alloc(ctx->jit.len, &ctx->jit.buf,
+					       alignment, fill_ill_insn);
+	if (!ctx->bpf_header) {
+		pr_err("bpf-jit: could not allocate memory for translation.\n");
+		return -ENOMEM;
+	}
+
+	if (ctx->need_extra_pass) {
+		ctx->jit_data = kzalloc(sizeof(*ctx->jit_data), GFP_KERNEL);
+		if (!ctx->jit_data)
+			return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/*
+ * The first phase of the translation without actually emitting any
+ * instruction. It helps in getting a forecast on some aspects, such
+ * as the length of the whole program or where the epilogue starts.
+ *
+ * Whenever the necessary parameters are known, memories are allocated.
+ */
+static int jit_prepare(struct jit_context *ctx)
+{
+	int ret;
+
+	/* Dry run. */
+	ctx->emit = false;
+
+	CHECK_RET(jit_prepare_early_mem_alloc(ctx));
+
+	/* Get the length of prologue section after some register analysis. */
+	analyze_reg_usage(ctx);
+	CHECK_RET(handle_prologue(ctx));
+
+	CHECK_RET(handle_body(ctx));
+
+	/* Record at which offset epilogue begins. */
+	ctx->epilogue_offset = ctx->jit.len;
+
+	/* Process the epilogue section now. */
+	CHECK_RET(handle_epilogue(ctx));
+
+	CHECK_RET(jit_prepare_final_mem_alloc(ctx));
+
+	return 0;
+}
+
+/*
+ * jit_compile() is the real compilation phase. jit_prepare() is
+ * invoked before jit_compile() as a dry-run to make sure everything
+ * will go OK and allocate the necessary memory.
+ *
+ * In the end, jit_compile() checks if it has produced the same number
+ * of instructions as jit_prepare() would.
+ */
+static int jit_compile(struct jit_context *ctx)
+{
+	int ret;
+
+	/* Let there be code. */
+	ctx->emit = true;
+
+	CHECK_RET(handle_prologue(ctx));
+
+	CHECK_RET(handle_body(ctx));
+
+	CHECK_RET(handle_epilogue(ctx));
+
+	if (ctx->jit.index != ctx->jit.len) {
+		pr_err("bpf-jit: divergence between the phases; "
+		       "%u vs. %u (bytes).\n",
+		       ctx->jit.len, ctx->jit.index);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+/*
+ * Calling this function implies a successful JIT. A successful
+ * translation is signaled by setting the right parameters:
+ *
+ * prog->jited=1, prog->jited_len=..., prog->bpf_func=...
+ */
+static int jit_finalize(struct jit_context *ctx)
+{
+	struct bpf_prog *prog = ctx->prog;
+
+	/* We're going to need this information for the "do_extra_pass()". */
+	if (ctx->need_extra_pass) {
+		ctx->jit_data->bpf_header = ctx->bpf_header;
+		ctx->jit_data->bpf2insn = ctx->bpf2insn;
+		prog->aux->jit_data = (void *)ctx->jit_data;
+	} else {
+		/*
+		 * If things seem finalised, then mark the JITed memory
+		 * as R-X and flush it.
+		 */
+		if (bpf_jit_binary_lock_ro(ctx->bpf_header)) {
+			pr_err("bpf-jit: Could not lock the JIT memory.\n");
+			return -EFAULT;
+		}
+		flush_icache_range((unsigned long)ctx->bpf_header,
+				   (unsigned long)
+				   BUF(ctx->jit.buf, ctx->jit.len));
+		prog->aux->jit_data = NULL;
+		bpf_prog_fill_jited_linfo(prog, ctx->bpf2insn);
+	}
+
+	ctx->success = true;
+	prog->bpf_func = (void *)ctx->jit.buf;
+	prog->jited_len = ctx->jit.len;
+	prog->jited = 1;
+
+	jit_ctx_cleanup(ctx);
+	jit_dump(ctx);
+
+	return 0;
+}
+
+/*
+ * A lenient verification for the existence of JIT context in "prog".
+ * Apparently the JIT internals, namely jit_subprogs() in bpf/verifier.c,
+ * may request for a second compilation although nothing needs to be done.
+ */
+static inline int check_jit_context(const struct bpf_prog *prog)
+{
+	if (!prog->aux->jit_data) {
+		pr_notice("bpf-jit: no jit data for the extra pass.\n");
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+/* Reuse the previous pass's data. */
+static int jit_resume_context(struct jit_context *ctx)
+{
+	struct arc_jit_data *jdata =
+		(struct arc_jit_data *)ctx->prog->aux->jit_data;
+
+	if (!jdata) {
+		pr_err("bpf-jit: no jit data for the extra pass.\n");
+		return -EINVAL;
+	}
+
+	ctx->jit.buf = (u8 *)ctx->prog->bpf_func;
+	ctx->jit.len = ctx->prog->jited_len;
+	ctx->bpf_header = jdata->bpf_header;
+	ctx->bpf2insn = (u32 *)jdata->bpf2insn;
+	ctx->bpf2insn_valid = ctx->bpf2insn ? true : false;
+	ctx->jit_data = jdata;
+
+	return 0;
+}
+
+/*
+ * Patch in the new addresses. The instructions of interest are:
+ *
+ * - call
+ * - ld r64, imm64
+ *
+ * For "call"s, it resolves the addresses one more time through the
+ * handle_call().
+ *
+ * For 64-bit immediate loads, it just retranslates them, because the BPF
+ * core in kernel might have changed the value since the normal pass.
+ */
+static int jit_patch_relocations(struct jit_context *ctx)
+{
+	const u8 bpf_opc_call = BPF_JMP | BPF_CALL;
+	const u8 bpf_opc_ldi64 = BPF_LD | BPF_DW | BPF_IMM;
+	const struct bpf_prog *prog = ctx->prog;
+	int ret;
+
+	ctx->emit = true;
+	for (u32 i = 0; i < prog->len; i++) {
+		const struct bpf_insn *insn = &prog->insnsi[i];
+		u8 dummy;
+		/*
+		 * Adjust "ctx.jit.index", so "gen_*()" functions below
+		 * can use it for their output addresses.
+		 */
+		ctx->jit.index = ctx->bpf2insn[i];
+
+		if (insn->code == bpf_opc_call) {
+			CHECK_RET(handle_call(ctx, insn, &dummy));
+		} else if (insn->code == bpf_opc_ldi64) {
+			CHECK_RET(handle_ld_imm64(ctx, insn, &dummy));
+			/* Skip the next instruction. */
+			++i;
+		}
+	}
+	return 0;
+}
+
+/*
+ * A normal pass that involves a "dry-run" phase, jit_prepare(),
+ * to get the necessary data for the real compilation phase,
+ * jit_compile().
+ */
+static struct bpf_prog *do_normal_pass(struct bpf_prog *prog)
+{
+	struct jit_context ctx;
+
+	/* Bail out if JIT is disabled. */
+	if (!prog->jit_requested)
+		return prog;
+
+	if (jit_ctx_init(&ctx, prog)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	/* Get the lengths and allocate buffer. */
+	if (jit_prepare(&ctx)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	if (jit_compile(&ctx)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	if (jit_finalize(&ctx)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	return ctx.prog;
+}
+
+/*
+ * If there are multi-function BPF programs that call each other,
+ * their translated addresses are not known all at once. Therefore,
+ * an extra pass is needed to consult the bpf_jit_get_func_addr()
+ * again to get the newly translated addresses in order to resolve
+ * the "call"s.
+ */
+static struct bpf_prog *do_extra_pass(struct bpf_prog *prog)
+{
+	struct jit_context ctx;
+
+	/* Skip if there's no context to resume from. */
+	if (check_jit_context(prog))
+		return prog;
+
+	if (jit_ctx_init(&ctx, prog)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	if (jit_resume_context(&ctx)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	if (jit_patch_relocations(&ctx)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	if (jit_finalize(&ctx)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	return ctx.prog;
+}
+
+/*
+ * This function may be invoked twice for the same stream of BPF
+ * instructions. The "extra pass" happens, when there are
+ * (re)locations involved that their addresses are not known
+ * during the first run.
+ */
+struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
+{
+	vm_dump(prog);
+
+	/* Was this program already translated? */
+	if (!prog->jited)
+		return do_normal_pass(prog);
+	else
+		return do_extra_pass(prog);
+
+	return prog;
+}
diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c
index b821df7b0089..1feb990a56bc 100644
--- a/arch/arc/plat-axs10x/axs10x.c
+++ b/arch/arc/plat-axs10x/axs10x.c
@@ -6,7 +6,6 @@
  */
 
 #include <linux/of_fdt.h>
-#include <linux/of_platform.h>
 #include <linux/libfdt.h>
 
 #include <asm/asm-offsets.h>
diff --git a/arch/arm/Kbuild b/arch/arm/Kbuild
index b506622e7e23..69de6b6243c7 100644
--- a/arch/arm/Kbuild
+++ b/arch/arm/Kbuild
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_FPE_NWFPE)		+= nwfpe/
 # Put arch/arm/fastfpe/ to use this.
-obj-$(CONFIG_FPE_FASTFPE)	+= $(patsubst $(srctree)/$(src)/%,%,$(wildcard $(srctree)/$(src)/fastfpe/))
+obj-$(CONFIG_FPE_FASTFPE)	+= $(patsubst $(src)/%,%,$(wildcard $(src)/fastfpe/))
 obj-$(CONFIG_VFP)		+= vfp/
 obj-$(CONFIG_XEN)		+= xen/
 obj-$(CONFIG_VDSO)		+= vdso/
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 87badeae3181..45d29320196f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -5,8 +5,13 @@ config ARM
 	select ARCH_32BIT_OFF_T
 	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE if HAVE_KRETPROBES && FRAME_POINTER && !ARM_UNWIND
 	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CACHE_LINE_SIZE if OF
+	select ARCH_HAS_CPU_CACHE_ALIASING
+	select ARCH_HAS_CPU_FINALIZE_INIT if MMU
 	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL if MMU
+	select ARCH_HAS_DMA_ALLOC if MMU
+	select ARCH_HAS_DMA_OPS
 	select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_FORTIFY_SOURCE
@@ -17,22 +22,25 @@ config ARM
 	select ARCH_HAS_PTE_SPECIAL if ARM_LPAE
 	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_SET_MEMORY
+	select ARCH_STACKWALK
 	select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
 	select ARCH_HAS_STRICT_MODULE_RWX if MMU
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_TEARDOWN_DMA_OPS if MMU
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
-	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if CPU_V7 || CPU_V7M || CPU_V6K
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_KEEP_MEMBLOCK
+	select ARCH_HAS_UBSAN
 	select ARCH_MIGHT_HAVE_PC_PARPORT
-	select ARCH_NO_SG_CHAIN if !ARM_HAS_SG_CHAIN
 	select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
 	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7
+	select ARCH_NEED_CMPXCHG_1_EMU if CPU_V6
 	select ARCH_SUPPORTS_ATOMIC_RMW
+	select ARCH_SUPPORTS_CFI
 	select ARCH_SUPPORTS_HUGETLBFS if ARM_LPAE
+	select ARCH_SUPPORTS_PER_VMA_LOCK
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_USE_MEMTEST
@@ -42,12 +50,12 @@ config ARM
 	select ARCH_WANT_LD_ORPHAN_WARN
 	select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
 	select BUILDTIME_TABLE_SORT if MMU
+	select COMMON_CLK if !(ARCH_RPC || ARCH_FOOTBRIDGE)
 	select CLONE_BACKWARDS
 	select CPU_PM if SUSPEND || CPU_IDLE
 	select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select DMA_DECLARE_COHERENT
 	select DMA_GLOBAL_POOL if !MMU
-	select DMA_OPS
 	select DMA_NONCOHERENT_MMAP if MMU
 	select EDAC_SUPPORT
 	select EDAC_ATOMIC_SCRUB
@@ -57,6 +65,7 @@ config ARM
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 	select GENERIC_IRQ_IPI if SMP
 	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_CPU_DEVICES
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IRQ_MULTI_HANDLER
@@ -68,13 +77,15 @@ config ARM
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
 	select HARDIRQS_SW_RESEND
+	select HAS_IOPORT
 	select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT
 	select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
-	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU && (!PREEMPT_RT || !SMP)
 	select HAVE_ARCH_KFENCE if MMU && !XIP_KERNEL
 	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
 	select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
 	select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
+	select HAVE_ARCH_KSTACK_ERASE
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
 	select HAVE_ARCH_PFN_VALID
 	select HAVE_ARCH_SECCOMP
@@ -89,13 +100,15 @@ config ARM
 	select HAVE_BUILDTIME_MCOUNT_SORT
 	select HAVE_DEBUG_KMEMLEAK if !XIP_KERNEL
 	select HAVE_DMA_CONTIGUOUS if MMU
+	select HAVE_EXTRA_IPI_TRACEPOINTS
 	select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
 	select HAVE_EXIT_THREAD
-	select HAVE_FAST_GUP if ARM_LPAE
-	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
+	select HAVE_GUP_FAST if ARM_LPAE
+	select HAVE_FUNCTION_ERROR_INJECTION
 	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_GRAPH_FREGS
 	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
 	select HAVE_GCC_PLUGINS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
@@ -107,32 +120,42 @@ config ARM
 	select HAVE_KERNEL_XZ
 	select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M
 	select HAVE_KRETPROBES if HAVE_KPROBES
+	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if (LD_VERSION >= 23600 || LD_IS_LLD) && LD_CAN_USE_KEEP_IN_OVERLAY
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
 	select HAVE_OPTPROBES if !THUMB2_KERNEL
+	select HAVE_PAGE_SIZE_4KB
+	select HAVE_PCI if MMU
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
 	select MMU_GATHER_RCU_TABLE_FREE if SMP && ARM_LPAE
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RSEQ
+	select HAVE_RUST if CPU_LITTLE_ENDIAN && CPU_32v7
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
+	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
 	select IRQ_FORCED_THREADING
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_REL
 	select NEED_DMA_MAP_STATE
 	select OF_EARLY_FLATTREE if OF
 	select OLD_SIGACTION
 	select OLD_SIGSUSPEND3
+	select PCI_DOMAINS_GENERIC if PCI
 	select PCI_SYSCALL if PCI
 	select PERF_USE_VMALLOC
 	select RTC_LIB
+	select SPARSE_IRQ if !(ARCH_FOOTBRIDGE || ARCH_RPC)
 	select SYS_SUPPORTS_APM_EMULATION
 	select THREAD_INFO_IN_TASK
+	select TIMER_OF if OF
 	select HAVE_ARCH_VMAP_STACK if MMU && ARM_HAS_GROUP_RELOCS
 	select TRACE_IRQFLAGS_SUPPORT if !CPU_V7M
+	select USE_OF if !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	# Above selects are sorted alphabetically; please add new ones
 	# according to that.  Thanks.
 	help
@@ -144,22 +167,15 @@ config ARM
 	  <http://www.arm.linux.org.uk/>.
 
 config ARM_HAS_GROUP_RELOCS
-	def_bool y
-	depends on !LD_IS_LLD || LLD_VERSION >= 140000
-	depends on !COMPILE_TEST
+	def_bool !COMPILE_TEST
 	help
 	  Whether or not to use R_ARM_ALU_PC_Gn or R_ARM_LDR_PC_Gn group
-	  relocations, which have been around for a long time, but were not
-	  supported in LLD until version 14. The combined range is -/+ 256 MiB,
-	  which is usually sufficient, but not for allyesconfig, so we disable
-	  this feature when doing compile testing.
-
-config ARM_HAS_SG_CHAIN
-	bool
+	  relocations. The combined range is -/+ 256 MiB, which is usually
+	  sufficient, but not for allyesconfig, so we disable this feature
+	  when doing compile testing.
 
 config ARM_DMA_USE_IOMMU
 	bool
-	select ARM_HAS_SG_CHAIN
 	select NEED_SG_DMA_LENGTH
 
 if ARM_DMA_USE_IOMMU
@@ -243,9 +259,9 @@ config ARCH_MTD_XIP
 	bool
 
 config ARM_PATCH_PHYS_VIRT
-	bool "Patch physical to virtual translations at runtime" if EMBEDDED
+	bool "Patch physical to virtual translations at runtime" if !ARCH_MULTIPLATFORM
 	default y
-	depends on !XIP_KERNEL && MMU
+	depends on MMU
 	help
 	  Patch phys-to-virt and virt-to-phys translation functions at
 	  boot and module load time according to the position of the
@@ -274,12 +290,11 @@ config NEED_MACH_MEMORY_H
 
 config PHYS_OFFSET
 	hex "Physical address of main memory" if MMU
-	depends on !ARM_PATCH_PHYS_VIRT
+	depends on !ARM_PATCH_PHYS_VIRT || !AUTO_ZRELADDR
 	default DRAM_BASE if !MMU
 	default 0x00000000 if ARCH_FOOTBRIDGE
 	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
-	default 0x30000000 if ARCH_S3C24XX
-	default 0xa0000000 if ARCH_IOP32X || ARCH_PXA
+	default 0xa0000000 if ARCH_PXA
 	default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100
 	default 0
 	help
@@ -307,13 +322,8 @@ config MMU
 config ARM_SINGLE_ARMV7M
 	def_bool !MMU
 	select ARM_NVIC
-	select AUTO_ZRELADDR
-	select TIMER_OF
-	select COMMON_CLK
 	select CPU_V7M
 	select NO_IOPORT_MAP
-	select SPARSE_IRQ
-	select USE_OF
 
 config ARCH_MMAP_RND_BITS_MIN
 	default 8
@@ -323,158 +333,22 @@ config ARCH_MMAP_RND_BITS_MAX
 	default 15 if PAGE_OFFSET=0x80000000
 	default 16
 
-#
-# The "ARM system type" choice list is ordered alphabetically by option
-# text.  Please add new entries in the option alphabetic order.
-#
-choice
-	prompt "ARM system type"
-	depends on MMU
-	default ARCH_MULTIPLATFORM
-
 config ARCH_MULTIPLATFORM
-	bool "Allow multiple platforms to be selected"
-	select ARCH_FLATMEM_ENABLE
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_SELECT_MEMORY_MODEL
-	select ARM_HAS_SG_CHAIN
-	select ARM_PATCH_PHYS_VIRT
-	select AUTO_ZRELADDR
-	select TIMER_OF
-	select COMMON_CLK
-	select HAVE_PCI
-	select PCI_DOMAINS_GENERIC if PCI
-	select SPARSE_IRQ
-	select USE_OF
-
-config ARCH_FOOTBRIDGE
-	bool "FootBridge"
-	depends on CPU_LITTLE_ENDIAN
-	depends on ATAGS
-	select CPU_SA110
-	select FOOTBRIDGE
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for systems based on the DC21285 companion chip
-	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
-
-config ARCH_RPC
-	bool "RiscPC"
-	depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000
-	depends on CPU_LITTLE_ENDIAN
-	depends on ATAGS
-	select ARCH_ACORN
-	select ARCH_MAY_HAVE_PC_FDC
-	select ARCH_SPARSEMEM_ENABLE
-	select ARM_HAS_SG_CHAIN
-	select CPU_SA110
-	select FIQ
-	select HAVE_PATA_PLATFORM
-	select ISA_DMA_API
-	select LEGACY_TIMER_TICK
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	select NO_IOPORT_MAP
-	help
-	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
-	  CD-ROM interface, serial and parallel port, and the floppy drive.
-
-config ARCH_SA1100
-	bool "SA1100-based"
-	depends on CPU_LITTLE_ENDIAN
-	depends on ATAGS
-	select ARCH_MTD_XIP
-	select ARCH_SPARSEMEM_ENABLE
-	select CLKSRC_MMIO
-	select CLKSRC_PXA
-	select TIMER_OF if OF
-	select COMMON_CLK
-	select CPU_FREQ
-	select CPU_SA1100
-	select GPIOLIB
-	select IRQ_DOMAIN
-	select ISA
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	help
-	  Support for StrongARM 11x0 based boards.
-
-endchoice
-
-menu "Multiple platform selection"
-	depends on ARCH_MULTIPLATFORM
-
-comment "CPU Core family selection"
-
-config ARCH_MULTI_V4
-	bool "ARMv4 based platforms (FA526)"
-	depends on !ARCH_MULTI_V6_V7
-	select ARCH_MULTI_V4_V5
-	select CPU_FA526
-
-config ARCH_MULTI_V4T
-	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
-	depends on !ARCH_MULTI_V6_V7
-	select ARCH_MULTI_V4_V5
-	select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
-		CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
-		CPU_ARM925T || CPU_ARM940T)
-
-config ARCH_MULTI_V5
-	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
-	depends on !ARCH_MULTI_V6_V7
-	select ARCH_MULTI_V4_V5
-	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
-		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
-		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
-
-config ARCH_MULTI_V4_V5
-	bool
-
-config ARCH_MULTI_V6
-	bool "ARMv6 based platforms (ARM11)"
-	select ARCH_MULTI_V6_V7
-	select CPU_V6K
-
-config ARCH_MULTI_V7
-	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
+	bool "Require kernel to be portable to multiple machines" if EXPERT
+	depends on MMU && !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	default y
-	select ARCH_MULTI_V6_V7
-	select CPU_V7
-	select HAVE_SMP
-
-config ARCH_MULTI_V6_V7
-	bool
-	select MIGHT_HAVE_CACHE_L2X0
-
-config ARCH_MULTI_CPU_AUTO
-	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
-	select ARCH_MULTI_V5
+	help
+	  In general, all Arm machines can be supported in a single
+	  kernel image, covering either Armv4/v5 or Armv6/v7.
 
-endmenu
+	  However, some configuration options require hardcoding machine
+	  specific physical addresses or enable errata workarounds that may
+	  break other machines.
 
-config ARCH_VIRT
-	bool "Dummy Virtual Machine"
-	depends on ARCH_MULTI_V7
-	select ARM_AMBA
-	select ARM_GIC
-	select ARM_GIC_V2M if PCI
-	select ARM_GIC_V3
-	select ARM_GIC_V3_ITS if PCI
-	select ARM_PSCI
-	select HAVE_ARM_ARCH_TIMER
+	  Selecting N here allows using those options, including
+	  DEBUG_UNCOMPRESS, XIP_KERNEL and ZBOOT_ROM. If unsure, say Y.
 
-config ARCH_AIROHA
-	bool "Airoha SoC Support"
-	depends on ARCH_MULTI_V7
-	select ARM_AMBA
-	select ARM_GIC
-	select ARM_GIC_V3
-	select ARM_PSCI
-	select HAVE_ARM_ARCH_TIMER
-	select COMMON_CLK
-	help
-	  Support for Airoha EN7523 SoCs
+source "arch/arm/Kconfig.platforms"
 
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
@@ -487,8 +361,6 @@ source "arch/arm/mach-alpine/Kconfig"
 
 source "arch/arm/mach-artpec/Kconfig"
 
-source "arch/arm/mach-asm9260/Kconfig"
-
 source "arch/arm/mach-aspeed/Kconfig"
 
 source "arch/arm/mach-at91/Kconfig"
@@ -501,8 +373,6 @@ source "arch/arm/mach-berlin/Kconfig"
 
 source "arch/arm/mach-clps711x/Kconfig"
 
-source "arch/arm/mach-cns3xxx/Kconfig"
-
 source "arch/arm/mach-davinci/Kconfig"
 
 source "arch/arm/mach-digicolor/Kconfig"
@@ -521,12 +391,8 @@ source "arch/arm/mach-highbank/Kconfig"
 
 source "arch/arm/mach-hisi/Kconfig"
 
-source "arch/arm/mach-hpe/Kconfig"
-
 source "arch/arm/mach-imx/Kconfig"
 
-source "arch/arm/mach-iop32x/Kconfig"
-
 source "arch/arm/mach-ixp4xx/Kconfig"
 
 source "arch/arm/mach-keystone/Kconfig"
@@ -541,8 +407,6 @@ source "arch/arm/mach-milbeaut/Kconfig"
 
 source "arch/arm/mach-mmp/Kconfig"
 
-source "arch/arm/mach-moxart/Kconfig"
-
 source "arch/arm/mach-mstar/Kconfig"
 
 source "arch/arm/mach-mv78xx0/Kconfig"
@@ -555,24 +419,20 @@ source "arch/arm/mach-nomadik/Kconfig"
 
 source "arch/arm/mach-npcm/Kconfig"
 
-source "arch/arm/mach-nspire/Kconfig"
-
 source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
-source "arch/arm/mach-oxnas/Kconfig"
-
 source "arch/arm/mach-pxa/Kconfig"
 
 source "arch/arm/mach-qcom/Kconfig"
 
-source "arch/arm/mach-rda/Kconfig"
-
 source "arch/arm/mach-realtek/Kconfig"
 
+source "arch/arm/mach-rpc/Kconfig"
+
 source "arch/arm/mach-rockchip/Kconfig"
 
 source "arch/arm/mach-s3c/Kconfig"
@@ -591,14 +451,10 @@ source "arch/arm/mach-sti/Kconfig"
 
 source "arch/arm/mach-stm32/Kconfig"
 
-source "arch/arm/mach-sunplus/Kconfig"
-
 source "arch/arm/mach-sunxi/Kconfig"
 
 source "arch/arm/mach-tegra/Kconfig"
 
-source "arch/arm/mach-uniphier/Kconfig"
-
 source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
@@ -638,7 +494,6 @@ config ARCH_ACORN
 config PLAT_ORION
 	bool
 	select CLKSRC_MMIO
-	select COMMON_CLK
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
 
@@ -653,8 +508,8 @@ source "arch/arm/mm/Kconfig"
 
 config IWMMXT
 	bool "Enable iWMMXt support"
-	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
-	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
+	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK
+	default y if PXA27x || PXA3xx || ARCH_MMP
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
@@ -723,7 +578,9 @@ config ARM_ERRATA_458693
 	  hazard might then cause a processor deadlock. The workaround enables
 	  the L1 caching of the NEON accesses and disables the PLD instruction
 	  in the ACTLR register. Note that setting specific bits in the ACTLR
-	  register may not be available in non-secure mode.
+	  register may not be available in non-secure mode and thus is not
+	  available on a multiplatform kernel. This should be applied by the
+	  bootloader instead.
 
 config ARM_ERRATA_460075
 	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
@@ -736,7 +593,9 @@ config ARM_ERRATA_460075
 	  and overwritten with stale memory contents from external memory. The
 	  workaround disables the write-allocate mode for the L2 cache via the
 	  ACTLR register. Note that setting specific bits in the ACTLR register
-	  may not be available in non-secure mode.
+	  may not be available in non-secure mode and thus is not available on
+	  a multiplatform kernel. This should be applied by the bootloader
+	  instead.
 
 config ARM_ERRATA_742230
 	bool "ARM errata: DMB operation may be faulty"
@@ -749,7 +608,10 @@ config ARM_ERRATA_742230
 	  ordering of the two writes. This workaround sets a specific bit in
 	  the diagnostic register of the Cortex-A9 which causes the DMB
 	  instruction to behave as a DSB, ensuring the correct behaviour of
-	  the two writes.
+	  the two writes. Note that setting specific bits in the diagnostics
+	  register may not be available in non-secure mode and thus is not
+	  available on a multiplatform kernel. This should be applied by the
+	  bootloader instead.
 
 config ARM_ERRATA_742231
 	bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
@@ -764,7 +626,10 @@ config ARM_ERRATA_742231
 	  replaced from one of the CPUs at the same time as another CPU is
 	  accessing it. This workaround sets specific bits in the diagnostic
 	  register of the Cortex-A9 which reduces the linefill issuing
-	  capabilities of the processor.
+	  capabilities of the processor. Note that setting specific bits in the
+	  diagnostics register may not be available in non-secure mode and thus
+	  is not available on a multiplatform kernel. This should be applied by
+	  the bootloader instead.
 
 config ARM_ERRATA_643719
 	bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
@@ -801,7 +666,9 @@ config ARM_ERRATA_743622
 	  register of the Cortex-A9 which disables the Store Buffer
 	  optimisation, preventing the defect from occurring. This has no
 	  visible impact on the overall performance or power consumption of the
-	  processor.
+	  processor. Note that setting specific bits in the diagnostics register
+	  may not be available in non-secure mode and thus is not available on a
+	  multiplatform kernel. This should be applied by the bootloader instead.
 
 config ARM_ERRATA_751472
 	bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
@@ -813,6 +680,10 @@ config ARM_ERRATA_751472
 	  completion of a following broadcasted operation if the second
 	  operation is received by a CPU before the ICIALLUIS has completed,
 	  potentially leading to corrupted entries in the cache or TLB.
+	  Note that setting specific bits in the diagnostics register may
+	  not be available in non-secure mode and thus is not available on
+	  a multiplatform kernel. This should be applied by the bootloader
+	  instead.
 
 config ARM_ERRATA_754322
 	bool "ARM errata: possible faulty MMU translations following an ASID switch"
@@ -866,7 +737,7 @@ config ARM_ERRATA_764319
 	bool "ARM errata: Read to DBGPRSR and DBGOSLSR may generate Undefined instruction"
 	depends on CPU_V7
 	help
-	  This option enables the workaround for the 764319 Cortex A-9 erratum.
+	  This option enables the workaround for the 764319 Cortex-A9 erratum.
 	  CP14 read accesses to the DBGPRSR and DBGOSLSR registers generate an
 	  unexpected Undefined Instruction exception when the DBGSWENABLE
 	  external pin is set to 0, even when the CP14 accesses are performed
@@ -989,21 +860,10 @@ config ISA
 	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
 	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
 
-# Select ISA DMA controller support
-config ISA_DMA
-	bool
-	select ISA_DMA_API
-
 # Select ISA DMA interface
 config ISA_DMA_API
 	bool
 
-config PCI_NANOENGINE
-	bool "BSE nanoEngine PCI support"
-	depends on SA1100_NANOENGINE
-	help
-	  Enable PCI on the BSE nanoEngine board.
-
 config ARM_ERRATA_814220
 	bool "ARM errata: Cache maintenance by set/way operations can execute out of order"
 	depends on CPU_V7
@@ -1046,7 +906,7 @@ config SMP
 	  uniprocessor machines. On a uniprocessor machine, the kernel
 	  will run faster if you say N here.
 
-	  See also <file:Documentation/x86/i386/IO-APIC.rst>,
+	  See also <file:Documentation/arch/x86/i386/IO-APIC.rst>,
 	  <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO available at
 	  <http://tldp.org/HOWTO/SMP-HOWTO.html>.
 
@@ -1054,7 +914,7 @@ config SMP
 
 config SMP_ON_UP
 	bool "Allow booting SMP kernel on uniprocessor systems"
-	depends on SMP && !XIP_KERNEL && MMU
+	depends on SMP && MMU
 	default y
 	help
 	  SMP kernels contain instructions which fail on non-SMP processors.
@@ -1077,28 +937,14 @@ config IRQSTACKS
 config ARM_CPU_TOPOLOGY
 	bool "Support cpu topology definition"
 	depends on SMP && CPU_V7
+	select ARCH_SUPPORTS_SCHED_MC
+	select ARCH_SUPPORTS_SCHED_SMT
 	default y
 	help
 	  Support ARM cpu topology definition. The MPIDR register defines
 	  affinity between processors which is then used to describe the cpu
 	  topology of an ARM System.
 
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on ARM_CPU_TOPOLOGY
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-config SCHED_SMT
-	bool "SMT scheduler support"
-	depends on ARM_CPU_TOPOLOGY
-	help
-	  Improves the CPU scheduler's decision making when dealing with
-	  MultiThreading at a cost of slightly increased overhead in some
-	  places. If unsure say N here.
-
 config HAVE_ARM_SCU
 	bool
 	help
@@ -1227,27 +1073,6 @@ config ARM_PSCI
 	  0022A ("Power State Coordination Interface System Software on
 	  ARM processors").
 
-# The GPIO number here must be sorted by descending number. In case of
-# a multiplatform kernel, we just want the highest value required by the
-# selected platforms.
-config ARCH_NR_GPIO
-	int
-	default 2048 if ARCH_INTEL_SOCFPGA
-	default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \
-		ARCH_ZYNQ || ARCH_ASPEED
-	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
-		SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
-	default 416 if ARCH_SUNXI
-	default 392 if ARCH_U8500
-	default 352 if ARCH_VT8500
-	default 288 if ARCH_ROCKCHIP
-	default 264 if MACH_H4700
-	default 0
-	help
-	  Maximum number of GPIOs in the system.
-
-	  If unsure, leave the default value.
-
 config HZ_FIXED
 	int
 	default 128 if SOC_AT91RM9200
@@ -1303,7 +1128,7 @@ config THUMB2_KERNEL
 
 config ARM_PATCH_IDIV
 	bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()"
-	depends on CPU_32v7 && !XIP_KERNEL
+	depends on CPU_32v7
 	default y
 	help
 	  The ARM compiler inserts calls to __aeabi_idiv() and
@@ -1358,13 +1183,13 @@ config OABI_COMPAT
 	  at all). If in doubt say N.
 
 config ARCH_SELECT_MEMORY_MODEL
-	bool
+	def_bool y
 
 config ARCH_FLATMEM_ENABLE
-	bool
+	def_bool !(ARCH_RPC || ARCH_SA1100)
 
 config ARCH_SPARSEMEM_ENABLE
-	bool
+	def_bool !ARCH_FOOTBRIDGE
 	select SPARSEMEM_STATIC if SPARSEMEM
 
 config HIGHMEM
@@ -1388,7 +1213,7 @@ config HIGHMEM
 
 config HIGHPTE
 	bool "Allocate 2nd-level pagetables from highmem" if EXPERT
-	depends on HIGHMEM
+	depends on HIGHMEM && !PREEMPT_RT
 	default y
 	help
 	  The VM uses one page of physical memory for each page table.
@@ -1397,9 +1222,9 @@ config HIGHPTE
 	  consumed by page tables.  Setting this option will allow
 	  user-space 2nd level page tables to reside in high memory.
 
-config CPU_SW_DOMAIN_PAN
-	bool "Enable use of CPU domains to implement privileged no-access"
-	depends on MMU && !ARM_LPAE
+config ARM_PAN
+	bool "Enable privileged no-access"
+	depends on MMU
 	default y
 	help
 	  Increase kernel security by ensuring that normal kernel accesses
@@ -1408,10 +1233,26 @@ config CPU_SW_DOMAIN_PAN
 	  by ensuring that magic values (such as LIST_POISON) will always
 	  fault when dereferenced.
 
+	  The implementation uses CPU domains when !CONFIG_ARM_LPAE and
+	  disabling of TTBR0 page table walks with CONFIG_ARM_LPAE.
+
+config CPU_SW_DOMAIN_PAN
+	def_bool y
+	depends on ARM_PAN && !ARM_LPAE
+	help
+	  Enable use of CPU domains to implement privileged no-access.
+
 	  CPUs with low-vector mappings use a best-efforts implementation.
 	  Their lower 1MB needs to remain accessible for the vectors, but
 	  the remainder of userspace will become appropriately inaccessible.
 
+config CPU_TTBR0_PAN
+	def_bool y
+	depends on ARM_PAN && ARM_LPAE
+	help
+	  Enable privileged no-access by disabling TTBR0 page table walks when
+	  running in kernel mode.
+
 config HW_PERF_EVENTS
 	def_bool y
 	depends on ARM_PMU
@@ -1434,21 +1275,20 @@ config ARM_MODULE_PLTS
 	  Disabling this is usually safe for small single-platform
 	  configurations. If unsure, say y.
 
-config FORCE_MAX_ZONEORDER
-	int "Maximum zone order"
-	default "12" if SOC_AM33XX
-	default "9" if SA1111
-	default "11"
+config ARCH_FORCE_MAX_ORDER
+	int "Order of maximal physically contiguous allocations"
+	default "11" if SOC_AM33XX
+	default "8" if SA1111
+	default "10"
 	help
-	  The kernel memory allocator divides physically contiguous memory
-	  blocks into "zones", where each zone is a power of two number of
-	  pages.  This option selects the largest power of two that the kernel
-	  keeps in the memory allocator.  If you need to allocate very large
-	  blocks of physically contiguous memory, then you may need to
-	  increase this value.
+	  The kernel page allocator limits the size of maximal physically
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
+	  defines the maximal power of two of number of pages that can be
+	  allocated as a single contiguous block. This option allows
+	  overriding the default setting when ability to allocate very
+	  large blocks of physically contiguous memory is required.
 
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
+	  Don't change if unsure.
 
 config ALIGNMENT_TRAP
 	def_bool CPU_CP15_MMU
@@ -1520,8 +1360,7 @@ config CC_HAVE_STACKPROTECTOR_TLS
 config STACKPROTECTOR_PER_TASK
 	bool "Use a unique stack canary value for each task"
 	depends on STACKPROTECTOR && CURRENT_POINTER_IN_TPIDRURO && !XIP_DEFLATED_DATA
-	depends on GCC_PLUGINS || CC_HAVE_STACKPROTECTOR_TLS
-	select GCC_PLUGIN_ARM_SSP_PER_TASK if !CC_HAVE_STACKPROTECTOR_TLS
+	depends on CC_HAVE_STACKPROTECTOR_TLS
 	default y
 	help
 	  Due to the fact that GCC uses an ordinary symbol reference from
@@ -1544,6 +1383,9 @@ config USE_OF
 	help
 	  Include support for flattened device tree machine descriptions.
 
+config ARCH_WANT_FLAT_DTB_INSTALL
+	def_bool y
+
 config ATAGS
 	bool "Support for the traditional ATAGS boot data passing"
 	default y
@@ -1553,19 +1395,6 @@ config ATAGS
 	  the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
 	  to remove ATAGS support from your kernel binary.
 
-config UNUSED_BOARD_FILES
-	bool "Board support for machines without known users"
-	depends on ATAGS
-	help
-	  Most ATAGS based board files are completely unused and are
-	  scheduled for removal in early 2023, and left out of kernels
-	  by default now.  If you are using a board file that is marked
-	  as unused, turn on this option to build support into the kernel.
-
-	  To keep support for your individual board from being removed,
-	  send a reply to the email discussion at
-	  https://lore.kernel.org/all/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/
-
 config DEPRECATED_PARAM_STRUCT
 	bool "Provide old way to pass kernel parameters"
 	depends on ATAGS
@@ -1640,7 +1469,8 @@ config ARM_ATAG_DTB_COMPAT
 	  from the ATAG list and store it at run time into the appended DTB.
 
 choice
-	prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT
+	prompt "Kernel command line type"
+	depends on ARM_ATAG_DTB_COMPAT
 	default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
 
 config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
@@ -1669,9 +1499,9 @@ config CMDLINE
 	  memory size and the root device (e.g., mem=64M root=/dev/nfs).
 
 choice
-	prompt "Kernel command line type" if CMDLINE != ""
+	prompt "Kernel command line type"
+	depends on CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
-	depends on ATAGS
 
 config CMDLINE_FROM_BOOTLOADER
 	bool "Use bootloader kernel arguments if available"
@@ -1698,6 +1528,7 @@ endchoice
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
 	depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
+	depends on !ARM_PATCH_IDIV && !ARM_PATCH_PHYS_VIRT && !SMP_ON_UP
 	help
 	  Execute-In-Place allows the kernel to run from non-volatile storage
 	  directly addressable by the CPU, such as NOR flash. This saves RAM
@@ -1736,20 +1567,8 @@ config XIP_DEFLATED_DATA
 	  copied, saving some precious ROM space. A possible drawback is a
 	  slightly longer boot delay.
 
-config KEXEC
-	bool "Kexec system call (EXPERIMENTAL)"
-	depends on (!SMP || PM_SLEEP_SMP)
-	depends on MMU
-	select KEXEC_CORE
-	help
-	  kexec is a system call that implements the ability to shutdown your
-	  current kernel, and to start another kernel.  It is like a reboot
-	  but it is independent of the system firmware.   And like a reboot
-	  you can start any kernel with it, not just Linux.
-
-	  It is an ongoing process to be certain the hardware in a machine
-	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.
+config ARCH_SUPPORTS_KEXEC
+	def_bool (!SMP || PM_SLEEP_SMP) && MMU
 
 config ATAGS_PROC
 	bool "Export atags in procfs"
@@ -1759,20 +1578,15 @@ config ATAGS_PROC
 	  Should the atags used to boot the kernel be exported in an "atags"
 	  file in procfs. Useful with kexec.
 
-config CRASH_DUMP
-	bool "Build kdump crash kernel (EXPERIMENTAL)"
-	help
-	  Generate crash dump after being started by kexec. This should
-	  be normally only set in special crash dump kernels which are
-	  loaded in the main kernel with kexec-tools into a specially
-	  reserved region and then later executed after a crash by
-	  kdump/kexec. The crash dump kernel must be compiled to a
-	  memory address not used by the main kernel
+config ARCH_SUPPORTS_CRASH_DUMP
+	def_bool y
 
-	  For more details see Documentation/admin-guide/kdump/kdump.rst
+config ARCH_DEFAULT_CRASH_DUMP
+	def_bool y
 
 config AUTO_ZRELADDR
-	bool "Auto calculation of the decompressed kernel image address"
+	bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM
+	default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	help
 	  ZRELADDR is the physical address where the decompressed kernel
 	  image will be placed. If AUTO_ZRELADDR is selected, the address
@@ -1876,7 +1690,7 @@ config VFP
 	  Say Y to include VFP support code in the kernel. This is needed
 	  if your hardware includes a VFP unit.
 
-	  Please see <file:Documentation/arm/vfp/release-notes.rst> for
+	  Please see <file:Documentation/arch/arm/vfp/release-notes.rst> for
 	  release notes and additional status information.
 
 	  Say N if your target does not have VFP hardware.
@@ -1920,9 +1734,3 @@ config ARCH_HIBERNATION_POSSIBLE
 	default y if ARCH_SUSPEND_POSSIBLE
 
 endmenu
-
-if CRYPTO
-source "arch/arm/crypto/Kconfig"
-endif
-
-source "arch/arm/Kconfig.assembler"
diff --git a/arch/arm/Kconfig.assembler b/arch/arm/Kconfig.assembler
deleted file mode 100644
index 5cb31aae1188..000000000000
--- a/arch/arm/Kconfig.assembler
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-config AS_VFP_VMRS_FPINST
-	def_bool $(as-instr,.fpu vfpv2\nvmrs r0$(comma)FPINST)
-	help
-	  Supported by binutils >= 2.24 and LLVM integrated assembler.
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 792796a348c3..366f162e147d 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -17,7 +17,7 @@ config ARM_PTDUMP_DEBUGFS
 	  kernel.
 	  If in doubt, say "N"
 
-config DEBUG_WX
+config ARM_DEBUG_WX
 	bool "Warn on W+X mappings at boot"
 	depends on MMU
 	select ARM_PTDUMP_CORE
@@ -90,9 +90,6 @@ config BACKTRACE_VERBOSE
 	  In most cases, say N here, unless you are intending to debug the
 	  kernel and have access to the kernel binary image.
 
-config FRAME_POINTER
-	bool
-
 config DEBUG_USER
 	bool "Verbose user fault messages"
 	help
@@ -245,6 +242,10 @@ choice
 		depends on ARCH_BCM_5301X || ARCH_BCM_NSP
 		select DEBUG_UART_8250
 
+	config DEBUG_BCMBCA
+		bool "Kernel low-level debugging on BCMBCA UART0"
+		depends on ARCH_BCMBCA
+
 	config DEBUG_BCM_HR2
 		bool "Kernel low-level debugging on Hurricane 2 UART2"
 		depends on ARCH_BCM_HR2
@@ -307,14 +308,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
-	config DEBUG_CNS3XXX
-		bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
-		depends on ARCH_CNS3XXX
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-                  their output to the CNS3xxx UART0.
-
 	config DEBUG_DAVINCI_DA8XX_UART1
 		bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
 		depends on ARCH_DAVINCI_DA8XX
@@ -331,14 +324,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART2 serial port on DaVinci DA8XX devices.
 
-	config DEBUG_DAVINCI_DMx_UART0
-		bool "Kernel low-level debugging on DaVinci DMx using UART0"
-		depends on ARCH_DAVINCI_DMx
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART0 serial port on DaVinci DMx devices.
-
 	config DEBUG_DC21285_PORT
 		bool "Kernel low-level debugging messages via footbridge serial port"
 		depends on FOOTBRIDGE
@@ -768,30 +753,6 @@ choice
 		depends on ARCH_OMAP2PLUS
 		select DEBUG_UART_8250
 
-	config DEBUG_OMAP7XXUART1
-		bool "Kernel low-level debugging via OMAP730 UART1"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART1.
-
-	config DEBUG_OMAP7XXUART2
-		bool "Kernel low-level debugging via OMAP730 UART2"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART2.
-
-	config DEBUG_OMAP7XXUART3
-		bool "Kernel low-level debugging via OMAP730 UART3"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART3.
-
 	config DEBUG_TI81XXUART1
 		bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
 		depends on ARCH_OMAP2PLUS
@@ -1046,7 +1007,6 @@ choice
 	config DEBUG_S3C_UART0
 		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 0 for low-level debug"
@@ -1058,7 +1018,6 @@ choice
 	config DEBUG_S3C_UART1
 		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 1 for low-level debug"
@@ -1070,7 +1029,6 @@ choice
 	config DEBUG_S3C_UART2
 		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 2 for low-level debug"
@@ -1090,33 +1048,6 @@ choice
 		  their output to UART 3. The port must have been initialised
 		  by the boot-loader before use.
 
-	config DEBUG_S3C2410_UART0
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 0 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 0. The port must have been initialised
-		  by the boot-loader before use.
-
-	config DEBUG_S3C2410_UART1
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 1 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 1. The port must have been initialised
-		  by the boot-loader before use.
-
-	config DEBUG_S3C2410_UART2
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 2 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 2. The port must have been initialised
-		  by the boot-loader before use.
-
 	config DEBUG_SA1100
 		depends on ARCH_SA1100
 		bool "Use SA1100 UARTs for low-level debug"
@@ -1276,8 +1207,8 @@ choice
 		depends on MACH_STM32MP157
 		select DEBUG_STM32_UART
 		help
-		  Say Y here if you want kernel low-level debugging support
-		  on STM32MP1 based platforms, wich default UART is wired on
+		  Say Y here if you want kernel low-level debugging support on
+		  STM32MP1-based platforms, where the default UART is wired to
 		  UART4, but another UART instance can be selected by modifying
 		  CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT.
 
@@ -1479,13 +1410,6 @@ config DEBUG_AT91_UART
 config DEBUG_EXYNOS_UART
 	bool
 
-config DEBUG_S3C2410_UART
-	bool
-	select DEBUG_S3C24XX_UART
-
-config DEBUG_S3C24XX_UART
-	bool
-
 config DEBUG_S3C64XX_UART
 	bool
 
@@ -1493,8 +1417,7 @@ config DEBUG_S5PV210_UART
 	bool
 
 config DEBUG_S3C_UART
-	depends on DEBUG_S3C2410_UART || DEBUG_S3C24XX_UART || \
-		   DEBUG_S3C64XX_UART ||  DEBUG_S5PV210_UART || \
+	depends on DEBUG_S3C64XX_UART ||  DEBUG_S5PV210_UART || \
 		   DEBUG_EXYNOS_UART
 	int
 	default "0" if DEBUG_S3C_UART0
@@ -1595,7 +1518,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
-	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
+	default "debug/s3c24xx.S" if DEBUG_S3C64XX_UART
 	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
 	default "debug/sti.S" if DEBUG_STIH41X_ASC2
 	default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1
@@ -1607,7 +1530,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/vf.S" if DEBUG_VF_UART
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
-	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
+	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART || DEBUG_BCMBCA
 	default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
 	default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART
 	default "mach/debug-macro.S"
@@ -1618,11 +1541,10 @@ config DEBUG_UART_PL01X
 
 # Compatibility options for 8250
 config DEBUG_UART_8250
-	def_bool ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC
+	def_bool ARCH_IXP4XX || ARCH_RPC
 
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
-	default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
 	default 0x01c28000 if DEBUG_SUNXI_UART0
 	default 0x01c28400 if DEBUG_SUNXI_UART1
 	default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
@@ -1672,20 +1594,11 @@ config DEBUG_UART_PHYS
 	default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
 	default 0x48022000 if DEBUG_TI81XXUART2
 	default 0x48024000 if DEBUG_TI81XXUART3
-	default 0x4806a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
-				DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
-	default 0x4806c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
-				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
+	default 0x4806a000 if DEBUG_OMAP2UART1
+	default 0x4806c000 if DEBUG_OMAP2UART2
 	default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0x49020000 if DEBUG_OMAP3UART3
 	default 0x49042000 if DEBUG_OMAP3UART4
-	default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
-				DEBUG_S3C2410_UART0)
-	default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
-				DEBUG_S3C2410_UART1)
-	default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
-				DEBUG_S3C2410_UART2)
-	default 0x78000000 if DEBUG_CNS3XXX
 	default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1
 	default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
 	default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
@@ -1729,18 +1642,18 @@ config DEBUG_UART_PHYS
 	default 0xfcb00000 if DEBUG_HI3620_UART
 	default 0xfd883000 if DEBUG_ALPINE_UART0
 	default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1
-	default 0xfe800000 if ARCH_IOP32X
 	default 0xfed32000 if DEBUG_STIH41X_ASC2
 	default 0xff690000 if DEBUG_RK32_UART2
+	default 0xff800640 if DEBUG_BCMBCA
 	default 0xffc02000 if DEBUG_SOCFPGA_UART0
 	default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1
 	default 0xffc03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
 	default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
 	default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
 	default 0xfff36000 if DEBUG_HIGHBANK_UART
-	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
-	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
-	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
+	default 0xfffb0000 if DEBUG_OMAP1UART1
+	default 0xfffb0800 if DEBUG_OMAP1UART2
+	default 0xfffb9800 if DEBUG_OMAP1UART3
 	default 0xfffe8600 if DEBUG_BCM63XX_UART
 	default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
 	default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
@@ -1754,9 +1667,9 @@ config DEBUG_UART_PHYS
 		DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \
 		DEBUG_RCAR_GEN2_SCIFA2 || \
 		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
-		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
+		DEBUG_RMOBILE_SCIFA4 || \
 		DEBUG_S3C64XX_UART || \
-		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_BCMBCA || DEBUG_ASM9260_UART || \
 		DEBUG_DIGICOLOR_UA0 || \
 		DEBUG_AT91_UART || DEBUG_STM32_UART || \
 		DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
@@ -1791,15 +1704,9 @@ config DEBUG_UART_VIRT
 	default 0xf6200000 if DEBUG_PXA_UART1
 	default 0xf7000000 if DEBUG_SUN9I_UART0
 	default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
-	default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
-				DEBUG_S3C2410_UART0)
 	default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
 	default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
 	default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
-	default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
-				DEBUG_S3C2410_UART1)
-	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
-				DEBUG_S3C2410_UART2)
 	default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8007000 if DEBUG_HIP04_UART
@@ -1812,13 +1719,10 @@ config DEBUG_UART_VIRT
 	default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
 	default 0xfa022000 if DEBUG_TI81XXUART2
 	default 0xfa024000 if DEBUG_TI81XXUART3
-	default 0xfa06a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
-				DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
-	default 0xfa06c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
-				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
+	default 0xfa06a000 if DEBUG_OMAP2UART1
+	default 0xfa06c000 if DEBUG_OMAP2UART2
 	default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0xfa71e000 if DEBUG_QCOM_UARTDM
-	default 0xfb002000 if DEBUG_CNS3XXX
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
 	default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfb020000 if DEBUG_OMAP3UART3
@@ -1835,7 +1739,7 @@ config DEBUG_UART_VIRT
 	default 0xfe018000 if DEBUG_MMP_UART3
 	default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
 	default 0xfe300000 if DEBUG_BCM_KONA_UART
-	default 0xfe800000 if ARCH_IOP32X
+	default 0xfe300640 if DEBUG_BCMBCA
 	default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
 	default 0xfeb24000 if DEBUG_RK3X_UART0
 	default 0xfeb26000 if DEBUG_RK3X_UART1
@@ -1846,7 +1750,6 @@ config DEBUG_UART_VIRT
 	default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
 	default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
-	default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
 	default 0xfec90000 if DEBUG_RK32_UART2
 	default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
 	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART
@@ -1859,16 +1762,16 @@ config DEBUG_UART_VIRT
 	default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
 	default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
 	default 0xfef36000 if DEBUG_HIGHBANK_UART
-	default 0xff0b0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
-	default 0xff0b0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
-	default 0xff0b9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
+	default 0xff0b0000 if DEBUG_OMAP1UART1
+	default 0xff0b0800 if DEBUG_OMAP1UART2
+	default 0xff0b9800 if DEBUG_OMAP1UART3
 	default 0xffd01000 if DEBUG_HIP01_UART
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
+		DEBUG_QCOM_UARTDM || \
 		DEBUG_S3C64XX_UART || \
-		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_BCMBCA || DEBUG_ASM9260_UART || \
 		DEBUG_DIGICOLOR_UA0 || \
 		DEBUG_AT91_UART || DEBUG_STM32_UART || \
 		DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
@@ -1877,9 +1780,8 @@ config DEBUG_UART_VIRT
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-	default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \
-		DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \
-		DEBUG_OMAP7XXUART3
+	default 0 if DEBUG_FOOTBRIDGE_COM1 || DEBUG_BCM_5301X || \
+		DEBUG_BCM_HR2
 	default 3 if DEBUG_MSTARV7_PMUART
 	default 2
 
@@ -1890,9 +1792,9 @@ config DEBUG_UART_8250_WORD
 	default y if DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \
 		DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \
 		DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \
-		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
-		DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_BCM_IPROC_UART3 || \
-		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
+		DEBUG_DAVINCI_DA8XX_UART1 || DEBUG_DAVINCI_DA8XX_UART2 || \
+		DEBUG_BCM_IPROC_UART3 || DEBUG_BCM_KONA_UART || \
+		DEBUG_RK32_UART2
 
 config DEBUG_UART_8250_PALMCHIP
 	bool "8250 UART is Palmchip BK-310x"
@@ -1904,26 +1806,19 @@ config DEBUG_UART_8250_PALMCHIP
 
 config DEBUG_UNCOMPRESS
 	bool "Enable decompressor debugging via DEBUG_LL output"
-	depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
+	depends on !ARCH_MULTIPLATFORM
+	depends on !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
 		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
 		     !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING
 	help
-	  This option influences the normal decompressor output for
-	  multiplatform kernels.  Normally, multiplatform kernels disable
-	  decompressor output because it is not possible to know where to
-	  send the decompressor output.
-
-	  When this option is set, the selected DEBUG_LL output method
-	  will be re-used for normal decompressor output on multiplatform
-	  kernels.
-	  
+	  Say Y here to enable debug output in the decompressor code, using
+	  the selected DEBUG_LL output method.
 
 config UNCOMPRESS_INCLUDE
 	string
-	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
-					PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
-	default "mach/uncompress.h"
+	default "mach/uncompress.h" if ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100
+	default "debug/uncompress.h"
 
 config EARLY_PRINTK
 	bool "Early printk"
diff --git a/arch/arm/Kconfig.platforms b/arch/arm/Kconfig.platforms
new file mode 100644
index 000000000000..5c19c1f2cff6
--- /dev/null
+++ b/arch/arm/Kconfig.platforms
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+menu "Platform selection"
+	depends on MMU
+
+comment "CPU Core family selection"
+
+config ARCH_MULTI_V4
+	bool "ARMv4 based platforms (FA526, StrongARM)"
+	depends on !ARCH_MULTI_V6_V7
+	# https://github.com/llvm/llvm-project/issues/50764
+	depends on !LD_IS_LLD || LLD_VERSION >= 160000
+	select ARCH_MULTI_V4_V5
+	select CPU_FA526 if !(CPU_SA110 || CPU_SA1100)
+
+config ARCH_MULTI_V4T
+	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
+	depends on !ARCH_MULTI_V6_V7
+	# https://github.com/llvm/llvm-project/issues/50764
+	depends on !LD_IS_LLD || LLD_VERSION >= 160000
+	select ARCH_MULTI_V4_V5
+	select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
+		CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
+		CPU_ARM925T || CPU_ARM940T)
+
+config ARCH_MULTI_V5
+	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
+	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
+	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
+		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
+		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
+
+config ARCH_MULTI_V4_V5
+	bool
+
+config ARCH_MULTI_V6
+	bool "ARMv6 based platforms (ARM11)"
+	select ARCH_MULTI_V6_V7
+	select CPU_V6K
+
+config ARCH_MULTI_V7
+	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
+	default y
+	select ARCH_MULTI_V6_V7
+	select CPU_V7
+	select HAVE_SMP
+
+config ARCH_MULTI_V6_V7
+	bool
+	select MIGHT_HAVE_CACHE_L2X0
+
+config ARCH_MULTI_CPU_AUTO
+	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
+	select ARCH_MULTI_V5
+
+endmenu
+
+config ARCH_VIRT
+	bool "Dummy Virtual Machine"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V2M if PCI
+	select ARM_GIC_V3
+	select ARM_GIC_V3_ITS if PCI
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+
+config ARCH_AIROHA
+	bool "Airoha SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V3
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  Support for Airoha EN7523 SoCs
+
+config MACH_ASM9260
+	bool "Alphascale ASM9260"
+	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_ARM926T
+	select ASM9260_TIMER
+	help
+	  Support for Alphascale ASM9260 based platform.
+
+menuconfig ARCH_HPE
+	bool "HPE SoC support"
+	depends on ARCH_MULTI_V7
+	help
+	  This enables support for HPE ARM based BMC chips.
+
+if ARCH_HPE
+
+config ARCH_HPE_GXP
+	bool "HPE GXP SoC"
+	depends on ARCH_MULTI_V7
+	select ARM_VIC
+	select GENERIC_IRQ_CHIP
+	select CLKSRC_MMIO
+	help
+	  HPE GXP is the name of the HPE Soc. This SoC is used to implement many
+	  BMC features at HPE. It supports ARMv7 architecture based on the Cortex
+	  A9 core. It is capable of using an AXI bus to which a memory controller
+	  is attached. It has multiple SPI interfaces to connect boot flash and
+	  BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It
+	  has multiple i2c engines to drive connectivity with a host
+	  infrastructure.
+
+endif
+
+menuconfig ARCH_MOXART
+	bool "MOXA ART SoC"
+	depends on ARCH_MULTI_V4
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_FA526
+	select ARM_DMA_MEM_BUFFERABLE
+	select FARADAY_FTINTC010
+	select FTTMR010_TIMER
+	select GPIOLIB
+	select PHYLIB if NETDEVICES
+	help
+	  Say Y here if you want to run your kernel on hardware with a
+	  MOXA ART SoC.
+	  The MOXA ART SoC is based on a Faraday FA526 ARMv4 32-bit
+	  192 MHz CPU with MMU and 16KB/8KB D/I-cache (UC-7112-LX).
+	  Used on models UC-7101, UC-7112/UC-7110, IA240/IA241, IA3341.
+
+if ARCH_MOXART
+
+config MACH_UC7112LX
+	bool "MOXA UC-7112-LX"
+	depends on ARCH_MOXART
+	help
+	  Say Y here if you intend to run this kernel on a MOXA
+	  UC-7112-LX embedded computer.
+
+endif
+
+config ARCH_NSPIRE
+	bool "TI-NSPIRE based"
+	depends on ARCH_MULTI_V4T
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_ARM926T
+	select GENERIC_IRQ_CHIP
+	select ARM_AMBA
+	select ARM_VIC
+	select ARM_TIMER_SP804
+	select NSPIRE_TIMER
+	select POWER_RESET
+	select POWER_RESET_SYSCON
+	help
+	  This enables support for systems using the TI-NSPIRE CPU
+
+config ARCH_RDA
+	bool "RDA Micro SoCs"
+	depends on ARCH_MULTI_V7
+	select RDA_INTC
+	select RDA_TIMER
+	help
+	  This enables support for the RDA Micro 8810PL SoC family.
+
+menuconfig ARCH_SUNPLUS
+	bool "Sunplus SoCs"
+	depends on ARCH_MULTI_V7
+	help
+	  Support for Sunplus SoC family: SP7021 and succeeding SoC-based systems,
+	  such as the Banana Pi BPI-F2S development board (and derivatives).
+	  (<http://www.sinovoip.com.cn/ecp_view.asp?id=586>)
+	  (<https://tibbo.com/store/plus1.html>)
+
+if ARCH_SUNPLUS
+
+config SOC_SP7021
+	bool "Sunplus SP7021 SoC support"
+	default ARCH_SUNPLUS
+	select HAVE_ARM_ARCH_TIMER
+	select ARM_GIC
+	select ARM_PSCI
+	select PINCTRL
+	select PINCTRL_SPPCTL
+	select SERIAL_SUNPLUS if TTY
+	select SERIAL_SUNPLUS_CONSOLE if TTY
+	help
+	  Support for Sunplus SP7021 SoC. It is based on ARM 4-core
+	  Cortex-A7 with various peripherals (e.g.: I2C, SPI, SDIO,
+	  Ethernet, etc.), FPGA interface,  chip-to-chip bus.
+	  It is designed for industrial control.
+
+endif
+
+config ARCH_UNIPHIER
+	bool "Socionext UniPhier SoCs"
+	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_AMBA
+	select ARM_GLOBAL_TIMER
+	select ARM_GIC
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
+	select PINCTRL
+	select RESET_CONTROLLER
+	help
+	  Support for UniPhier SoC family developed by Socionext Inc.
+	  (formerly, System LSI Business Division of Panasonic Corporation)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 56f655deebb1..b7de4b6b284c 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -22,6 +22,9 @@ GZFLAGS		:=-9
 # Never generate .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
 
+# Disable FDPIC ABI
+KBUILD_CFLAGS	+= $(call cc-option,-mno-fdpic)
+
 # This should work on most of the modern platforms
 KBUILD_DEFCONFIG := multi_v7_defconfig
 
@@ -57,47 +60,54 @@ endif
 KBUILD_CFLAGS	+= $(call cc-option,-fno-ipa-sra)
 
 # This selects which instruction set is used.
+arch-$(CONFIG_CPU_32v7M)	:=-march=armv7-m
+arch-$(CONFIG_CPU_32v7)		:=-march=armv7-a
+arch-$(CONFIG_CPU_32v6)		:=-march=armv6
+# Only override the compiler option if ARMv6. The ARMv6K extensions are
+# always available in ARMv7
+ifeq ($(CONFIG_CPU_32v6),y)
+arch-$(CONFIG_CPU_32v6K)	:=-march=armv6k
+endif
+arch-$(CONFIG_CPU_32v5)		:=-march=armv5te
+arch-$(CONFIG_CPU_32v4T)	:=-march=armv4t
+arch-$(CONFIG_CPU_32v4)		:=-march=armv4
+arch-$(CONFIG_CPU_32v3)		:=-march=armv3m
+
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m
-arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 -march=armv7-a
-arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 -march=armv6
+cpp-$(CONFIG_CPU_32v7M)		:=-D__LINUX_ARM_ARCH__=7
+cpp-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7
+cpp-$(CONFIG_CPU_32v6)		:=-D__LINUX_ARM_ARCH__=6
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7
 ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 -march=armv6k
+cpp-$(CONFIG_CPU_32v6K)		:=-D__LINUX_ARM_ARCH__=6
 endif
-arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 -march=armv5te
-arch-$(CONFIG_CPU_32v4T)	=-D__LINUX_ARM_ARCH__=4 -march=armv4t
-arch-$(CONFIG_CPU_32v4)		=-D__LINUX_ARM_ARCH__=4 -march=armv4
-arch-$(CONFIG_CPU_32v3)		=-D__LINUX_ARM_ARCH__=3 -march=armv3m
-
-# Evaluate arch cc-option calls now
-arch-y := $(arch-y)
+cpp-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5
+cpp-$(CONFIG_CPU_32v4T)		:=-D__LINUX_ARM_ARCH__=4
+cpp-$(CONFIG_CPU_32v4)		:=-D__LINUX_ARM_ARCH__=4
+cpp-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3
 
 # This selects how we optimise for the processor.
-tune-$(CONFIG_CPU_ARM7TDMI)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM720T)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM740T)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM9TDMI)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM940T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E)	=-mtune=arm9e
-tune-$(CONFIG_CPU_ARM920T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM922T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM925T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM926T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_FA526)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_SA110)	=-mtune=strongarm110
-tune-$(CONFIG_CPU_SA1100)	=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	=-mtune=xscale
-tune-$(CONFIG_CPU_XSC3)		=-mtune=xscale
-tune-$(CONFIG_CPU_FEROCEON)	=-mtune=xscale
-tune-$(CONFIG_CPU_V6)		=-mtune=arm1136j-s
-tune-$(CONFIG_CPU_V6K)		=-mtune=arm1136j-s
-
-# Evaluate tune cc-option calls now
-tune-y := $(tune-y)
+tune-$(CONFIG_CPU_ARM7TDMI)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM720T)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM740T)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM9TDMI)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM940T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM946E)	:=-mtune=arm9e
+tune-$(CONFIG_CPU_ARM920T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM925T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_FA526)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
+tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
+tune-$(CONFIG_CPU_XSCALE)	:=-mtune=xscale
+tune-$(CONFIG_CPU_XSC3)		:=-mtune=xscale
+tune-$(CONFIG_CPU_FEROCEON)	:=-mtune=xscale
+tune-$(CONFIG_CPU_V6)		:=-mtune=arm1136j-s
+tune-$(CONFIG_CPU_V6K)		:=-mtune=arm1136j-s
 
 ifeq ($(CONFIG_AEABI),y)
 CFLAGS_ABI	:=-mabi=aapcs-linux -mfpu=vfp
@@ -114,53 +124,55 @@ CFLAGS_ABI	+= -meabi gnu
 endif
 
 ifeq ($(CONFIG_CURRENT_POINTER_IN_TPIDRURO),y)
-CFLAGS_ABI	+= -mtp=cp15
+KBUILD_CFLAGS	+= -mtp=cp15
 endif
 
 # Accept old syntax despite ".syntax unified"
 AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
 
+# The GCC option -ffreestanding is required in order to compile code containing
+# ARM/NEON intrinsics in a non C99-compliant environment (such as the kernel)
+CC_FLAGS_FPU	:= -ffreestanding
+# Enable <arm_neon.h>
+CC_FLAGS_FPU	+= -isystem $(shell $(CC) -print-file-name=include)
+CC_FLAGS_FPU	+= -march=armv7-a -mfloat-abi=softfp -mfpu=neon
+
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
-CFLAGS_ISA	:=-mthumb -Wa,-mimplicit-it=always $(AFLAGS_NOWARN)
+CFLAGS_ISA	:=-Wa,-mimplicit-it=always $(AFLAGS_NOWARN)
 AFLAGS_ISA	:=$(CFLAGS_ISA) -Wa$(comma)-mthumb
+CFLAGS_ISA	+=-mthumb
 else
 CFLAGS_ISA	:=$(call cc-option,-marm,) $(AFLAGS_NOWARN)
 AFLAGS_ISA	:=$(CFLAGS_ISA)
 endif
 
 # Need -Uarm for gcc < 3.x
+KBUILD_CPPFLAGS	+=$(cpp-y)
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) -Wa,$(arch-y) $(tune-y) -include $(srctree)/arch/arm/include/asm/unified.h -msoft-float
+KBUILD_RUSTFLAGS += --target=arm-unknown-linux-gnueabi
 
 CHECKFLAGS	+= -D__arm__
 
-#Default value
-head-y		:= arch/arm/kernel/head$(MMUEXT).o
-
 # Text offset. This list is sorted numerically by address in order to
 # provide a means to avoid/resolve conflicts in multi-arch kernels.
 # Note: the 32kB below this value is reserved for use by the kernel
 # during boot, and this offset is critical to the functioning of
 # kexec-tools.
 textofs-y	:= 0x00008000
-# We don't want the htc bootloader to corrupt kernel during resume
-textofs-$(CONFIG_PM_H1940)      := 0x00108000
 # RTD1195 has Boot ROM at start of address space
 textofs-$(CONFIG_ARCH_REALTEK)  := 0x00108000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
 ifeq ($(CONFIG_ARCH_SA1100),y)
 textofs-$(CONFIG_SA1111) := 0x00208000
 endif
-textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
-textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
-textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
+textofs-$(CONFIG_ARCH_QCOM_RESERVE_SMEM) := 0x00208000
 textofs-$(CONFIG_ARCH_MESON) := 0x00208000
 textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_ACTIONS)		+= actions
-machine-$(CONFIG_ARCH_AIROHA)		+= airoha
 machine-$(CONFIG_ARCH_ALPINE)		+= alpine
 machine-$(CONFIG_ARCH_ARTPEC)		+= artpec
 machine-$(CONFIG_ARCH_ASPEED)           += aspeed
@@ -169,25 +181,20 @@ machine-$(CONFIG_ARCH_AXXIA)		+= axxia
 machine-$(CONFIG_ARCH_BCM)		+= bcm
 machine-$(CONFIG_ARCH_BERLIN)		+= berlin
 machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
-machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
 machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
 machine-$(CONFIG_ARCH_DIGICOLOR)	+= digicolor
 machine-$(CONFIG_ARCH_DOVE)		+= dove
-machine-$(CONFIG_ARCH_EP93XX)		+= ep93xx
 machine-$(CONFIG_ARCH_EXYNOS)		+= exynos
 machine-$(CONFIG_ARCH_FOOTBRIDGE)	+= footbridge
 machine-$(CONFIG_ARCH_GEMINI)		+= gemini
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_HISI)		+= hisi
-machine-$(CONFIG_ARCH_HPE)		+= hpe
-machine-$(CONFIG_ARCH_IOP32X)		+= iop32x
 machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
 machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
 machine-$(CONFIG_ARCH_LPC18XX)		+= lpc18xx
 machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
 machine-$(CONFIG_ARCH_MESON)		+= meson
 machine-$(CONFIG_ARCH_MMP)		+= mmp
-machine-$(CONFIG_ARCH_MOXART)		+= moxart
 machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 machine-$(CONFIG_ARCH_MXC)		+= imx
@@ -197,14 +204,11 @@ machine-$(CONFIG_ARCH_MXS)		+= mxs
 machine-$(CONFIG_ARCH_MSTARV7)		+= mstar
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
 machine-$(CONFIG_ARCH_NPCM)		+= npcm
-machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
-machine-$(CONFIG_ARCH_OXNAS)		+= oxnas
 machine-$(CONFIG_ARCH_OMAP1)		+= omap1
 machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
 machine-$(CONFIG_ARCH_PXA)		+= pxa
 machine-$(CONFIG_ARCH_QCOM)		+= qcom
-machine-$(CONFIG_ARCH_RDA)		+= rda
 machine-$(CONFIG_ARCH_REALTEK)		+= realtek
 machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_ARCH_RPC)		+= rpc
@@ -215,7 +219,6 @@ machine-$(CONFIG_ARCH_RENESAS)	 	+= shmobile
 machine-$(CONFIG_ARCH_INTEL_SOCFPGA)	+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
 machine-$(CONFIG_ARCH_STM32)		+= stm32
-machine-$(CONFIG_ARCH_SUNPLUS)		+= sunplus
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
 machine-$(CONFIG_ARCH_U8500)		+= ux500
@@ -224,40 +227,24 @@ machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
 machine-$(CONFIG_PLAT_VERSATILE)	+= versatile
 machine-$(CONFIG_PLAT_SPEAR)		+= spear
 
-# Platform directory name.  This list is sorted alphanumerically
-# by CONFIG_* macro name.
-plat-$(CONFIG_PLAT_ORION)	+= orion
+# legacy platforms provide their own mach/*.h headers globally,
+# these three are mutually exclusive
+machdirs-$(CONFIG_ARCH_FOOTBRIDGE)	+= arch/arm/mach-footbridge
+machdirs-$(CONFIG_ARCH_RPC)		+= arch/arm/mach-rpc
+machdirs-$(CONFIG_ARCH_SA1100)		+= arch/arm/mach-sa1100
+KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%/include,$(machdirs-y))
 
 # The byte offset of the kernel image in RAM from the start of RAM.
 TEXT_OFFSET := $(textofs-y)
 
-# The first directory contains additional information for the boot setup code
-ifneq ($(machine-y),)
-MACHINE  := arch/arm/mach-$(word 1,$(machine-y))/
-else
-MACHINE  :=
-endif
-ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
-MACHINE  :=
-endif
-
-machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
-platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
-
-ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
-ifneq ($(CONFIG_ARM_SINGLE_ARMV7M),y)
-KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
-endif
-endif
-
 export	TEXT_OFFSET GZFLAGS MMUEXT
 
 # If we have a machine-specific directory, then include it in the build.
-core-y				+= $(machdirs) $(platdirs)
-
+core-y				+= $(patsubst %,arch/arm/mach-%/,$(machine-y))
 # For cleaning
-core-				+= $(patsubst %,arch/arm/mach-%/, $(machine-))
-core-				+= $(patsubst %,arch/arm/plat-%/, $(plat-))
+core-				+= $(patsubst %,arch/arm/mach-%/,$(machine-))
+
+core-$(CONFIG_PLAT_ORION)	+= arch/arm/plat-orion/
 
 libs-y				:= arch/arm/lib/ $(libs-y)
 
@@ -277,13 +264,13 @@ stack_protector_prepare: prepare0
 		-mstack-protector-guard=tls \
 		-mstack-protector-guard-offset=$(shell	\
 			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}'\
-				include/generated/asm-offsets.h))
+				$(objtree)/include/generated/asm-offsets.h))
 else
 stack_protector_prepare: prepare0
 	$(eval SSP_PLUGIN_CFLAGS := \
 		-fplugin-arg-arm_ssp_per_task_plugin-offset=$(shell	\
 			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}'\
-				include/generated/asm-offsets.h))
+				$(objtree)/include/generated/asm-offsets.h))
 	$(eval KBUILD_CFLAGS += $(SSP_PLUGIN_CFLAGS))
 	$(eval GCC_PLUGINS_CFLAGS += $(SSP_PLUGIN_CFLAGS))
 endif
@@ -310,22 +297,22 @@ bootpImage uImage: zImage
 zImage: Image
 
 $(BOOT_TARGETS): vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 	@$(kecho) '  Kernel: $(boot)/$@ is ready'
 
 $(INSTALL_TARGETS): KBUILD_IMAGE = $(boot)/$(patsubst %install,%Image,$@)
 $(INSTALL_TARGETS):
 	$(call cmd,install)
 
-PHONY += vdso_install
-vdso_install:
-ifeq ($(CONFIG_VDSO),y)
-	$(Q)$(MAKE) $(build)=arch/arm/vdso $@
-endif
+vdso-install-$(CONFIG_VDSO) += arch/arm/vdso/vdso.so.dbg
 
 # My testing targets (bypasses dependencies)
-bp:;	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage
+bp:;	$(Q)$(MAKE) $(build)=$(boot) $(boot)/bootpImage
 
+include $(srctree)/scripts/Makefile.defconf
+PHONY += multi_v7_lpae_defconfig
+multi_v7_lpae_defconfig:
+	$(call merge_into_defconfig,multi_v7_defconfig,lpae)
 
 define archhelp
   echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
@@ -340,5 +327,6 @@ define archhelp
   echo  '                  Install using (your) ~/bin/$(INSTALLKERNEL) or'
   echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'
-  echo  '  vdso_install  - Install unstripped vdso.so to $$(INSTALL_MOD_PATH)/vdso'
+  echo
+  echo  '  multi_v7_lpae_defconfig     - multi_v7_defconfig with CONFIG_ARM_LPAE enabled'
 endef
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 54a09f9464fb..ba9b9a802469 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -10,29 +10,22 @@
 #
 # Copyright (C) 1995-2002 Russell King
 #
-
 OBJCOPYFLAGS	:=-O binary -R .comment -S
 
-ifneq ($(MACHINE),)
-include $(MACHINE)/Makefile.boot
-endif
-
-# Note: the following conditions must always be true:
 #   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
-#   PARAMS_PHYS must be within 4MB of ZRELADDR
-#   INITRD_PHYS must be in RAM
-ZRELADDR    := $(zreladdr-y)
-PARAMS_PHYS := $(params_phys-y)
-INITRD_PHYS := $(initrd_phys-y)
+ifdef CONFIG_PHYS_OFFSET
+add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
+ZRELADDR    := $(call add_hex, $(CONFIG_PHYS_OFFSET), $(TEXT_OFFSET))
+endif
 
-export ZRELADDR INITRD_PHYS PARAMS_PHYS
+PHYS_OFFSET := $(CONFIG_PHYS_OFFSET)
+export ZRELADDR PARAMS_PHYS PHYS_OFFSET
 
 targets := Image zImage xipImage bootpImage uImage
 
 ifeq ($(CONFIG_XIP_KERNEL),y)
 
-cmd_deflate_xip_data = $(CONFIG_SHELL) -c \
-	'$(srctree)/$(src)/deflate_xip_data.sh $< $@'
+cmd_deflate_xip_data = $(CONFIG_SHELL) -c '$(src)/deflate_xip_data.sh $< $@'
 
 ifeq ($(CONFIG_XIP_DEFLATED_DATA),y)
 quiet_cmd_mkxip = XIPZ    $@
@@ -90,17 +83,10 @@ $(obj)/uImage:	$(obj)/zImage FORCE
 	@$(check_for_multiple_loadaddr)
 	$(call if_changed,uimage)
 
-$(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
+$(obj)/bootp/bootp: $(obj)/zImage FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
 
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
 
-PHONY += initrd
-initrd:
-	@test "$(INITRD_PHYS)" != "" || \
-	(echo This machine does not support INITRD; exit -1)
-	@test "$(INITRD)" != "" || \
-	(echo You must specify INITRD; exit -1)
-
 subdir-	    := bootp compressed dts
diff --git a/arch/arm/boot/bootp/Makefile b/arch/arm/boot/bootp/Makefile
index 981a8d03f064..f3443f7d7b02 100644
--- a/arch/arm/boot/bootp/Makefile
+++ b/arch/arm/boot/bootp/Makefile
@@ -6,7 +6,37 @@
 # architecture-specific flags and dependencies.
 #
 
-GCOV_PROFILE	:= n
+ifdef PHYS_OFFSET
+add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
+
+# If PHYS_OFFSET is set, INITRD_PHYS and PARAMS_PHYS can be derived,
+# otherwise they must be passed on the command line.
+#
+# Note: the following conditions must always be true:
+#   PARAMS_PHYS must be within 4MB of ZRELADDR
+#   INITRD_PHYS must be in RAM
+
+PARAMS_PHYS := $(call add_hex, $(PHYS_OFFSET), 0x100)
+
+# guess an initrd location if possible
+initrd_offset-$(CONFIG_ARCH_FOOTBRIDGE)	+= 0x00800000
+initrd_offset-$(CONFIG_ARCH_SA1100)	+= 0x00800000
+initrd_offset-$(CONFIG_ARCH_RPC)	+= 0x08000000
+INITRD_OFFSET := $(initrd_offset-y)
+ifdef INITRD_OFFSET
+INITRD_PHYS := $(call add_hex, $(PHYS_OFFSET), $(INITRD_OFFSET))
+endif
+
+endif
+
+PHONY += initrd
+initrd:
+	@test "$(PARAMS_PHYS)" != "" || \
+	(echo bootpImage: You must specify PHYS_OFFSET of PARAMS_PHYS ; exit -1)
+	@test "$(INITRD_PHYS)" != "" || \
+	(echo bootpImage: You must specify INITRD_OFFSET or INITRD_PHYS ; exit -1)
+	@test "$(INITRD)" != "" || \
+	(echo bootpImage: You must specify INITRD; exit -1)
 
 LDFLAGS_bootp	:= --no-undefined -X \
 		 --defsym initrd_phys=$(INITRD_PHYS) \
@@ -24,6 +54,6 @@ $(obj)/bootp:	$(src)/bootp.lds $(addprefix $(obj)/,init.o kernel.o initrd.o) FOR
 
 $(obj)/kernel.o: arch/arm/boot/zImage FORCE
 
-$(obj)/initrd.o: $(INITRD) FORCE
+$(obj)/initrd.o: initrd $(INITRD) FORCE
 
 PHONY += $(INITRD)
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 41bcbb460fac..a159120d1e42 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -22,12 +22,6 @@ ifeq ($(CONFIG_ARM_VIRT_EXT),y)
 OBJS		+= hyp-stub.o
 endif
 
-GCOV_PROFILE		:= n
-KASAN_SANITIZE		:= n
-
-# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
-KCOV_INSTRUMENT		:= n
-
 #
 # Architecture dependencies
 #
@@ -101,12 +95,13 @@ KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 
 ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin \
 	     -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
-	     -I$(obj) $(DISABLE_ARM_SSP_PER_TASK_PLUGIN)
+	     $(DISABLE_KSTACK_ERASE) \
+	     -I$(obj)
 ccflags-remove-$(CONFIG_FUNCTION_TRACER) += -pg
 asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell echo $$(($$($(NM) $(obj)/../../../../vmlinux | \
+KBSS_SZ = $(shell echo $$(($$($(NM) vmlinux | \
 		sed -n -e 's/^\([^ ]*\) [ABD] __bss_start$$/-0x\1/p' \
 		       -e 's/^\([^ ]*\) [ABD] __bss_stop$$/+0x\1/p') )) )
 LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
@@ -123,7 +118,7 @@ LDFLAGS_vmlinux += --no-undefined
 LDFLAGS_vmlinux += -X
 # Report orphan sections
 ifdef CONFIG_LD_ORPHAN_WARN
-LDFLAGS_vmlinux += --orphan-handling=warn
+LDFLAGS_vmlinux += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
 endif
 # Next argument is a linker script
 LDFLAGS_vmlinux += -T
@@ -163,4 +158,3 @@ $(obj)/piggy_data: $(obj)/../Image FORCE
 $(obj)/piggy.o: $(obj)/piggy_data
 
 CFLAGS_font.o := -Dstatic=
-AFLAGS_hyp-stub.o := -Wa,-march=armv7-a
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
index 1feb6b0f7a1f..627752f18661 100644
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -2,6 +2,7 @@
 #include <linux/libfdt_env.h>
 #include <asm/setup.h>
 #include <libfdt.h>
+#include "misc.h"
 
 #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
 #define do_extend_cmdline 1
diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
index 74255e819831..0669851394f0 100644
--- a/arch/arm/boot/compressed/decompress.c
+++ b/arch/arm/boot/compressed/decompress.c
@@ -31,6 +31,7 @@
 /* Not needed, but used in some headers pulled in by decompressors */
 extern char * strstr(const char * s1, const char *s2);
 extern size_t strlen(const char *s);
+extern int strcmp(const char *cs, const char *ct);
 extern int memcmp(const void *cs, const void *ct, size_t count);
 extern char * strchrnul(const char *, int);
 
diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S
index 230030c13085..65a3025c0e13 100644
--- a/arch/arm/boot/compressed/efi-header.S
+++ b/arch/arm/boot/compressed/efi-header.S
@@ -20,7 +20,7 @@
 		@ is accepted as an EFI binary. Booting via the UEFI stub
 		@ will not execute those instructions, but the ARM/Linux
 		@ boot protocol does, so we need some NOPs here.
-		.inst	MZ_MAGIC | (0xe225 << 16)	@ eor r5, r5, 0x4d000
+		.inst	IMAGE_DOS_SIGNATURE | (0xe225 << 16) @ eor r5, r5, 0x4d000
 		eor	r5, r5, 0x4d000			@ undo previous insn
 #else
 		__nop
@@ -43,7 +43,7 @@
 		.long	pe_header - start		@ Offset to the PE header.
 
 pe_header:
-		.long	PE_MAGIC
+		.long	IMAGE_NT_SIGNATURE
 
 coff_header:
 		.short	IMAGE_FILE_MACHINE_THUMB	@ Machine
@@ -60,7 +60,7 @@ coff_header:
 #define __pecoff_code_size (__pecoff_data_start - __efi_start)
 
 optional_header:
-		.short	PE_OPT_MAGIC_PE32		@ PE32 format
+		.short	IMAGE_NT_OPTIONAL_HDR32_MAGIC	@ PE32 format
 		.byte	0x02				@ MajorLinkerVersion
 		.byte	0x14				@ MinorLinkerVersion
 		.long	__pecoff_code_size		@ SizeOfCode
diff --git a/arch/arm/boot/compressed/fdt_check_mem_start.c b/arch/arm/boot/compressed/fdt_check_mem_start.c
index 9291a2661bdf..aa856567fd33 100644
--- a/arch/arm/boot/compressed/fdt_check_mem_start.c
+++ b/arch/arm/boot/compressed/fdt_check_mem_start.c
@@ -3,6 +3,7 @@
 #include <linux/kernel.h>
 #include <linux/libfdt.h>
 #include <linux/sizes.h>
+#include "misc.h"
 
 static const void *get_prop(const void *fdt, const char *node_path,
 			    const char *property, int minlen)
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 95abdd850fe3..23eae1a65064 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -20,10 +20,6 @@ __SA1100_start:
 #ifdef CONFIG_SA1100_COLLIE
 		mov	r7, #MACH_TYPE_COLLIE
 #endif
-#ifdef CONFIG_SA1100_SIMPAD
-		@ UNTIL we've something like an open bootldr
-		mov	r7, #MACH_TYPE_SIMPAD	@should be 87
-#endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		ands	r0, r0, #0x0d
 		beq	99f
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index bf79f2f78d23..9f406e9c0ea6 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -67,11 +67,7 @@
 #if defined(CONFIG_ARCH_SA1100)
 		.macro	loadsp, rb, tmp1, tmp2
 		mov	\rb, #0x80000000	@ physical base address
-#ifdef CONFIG_DEBUG_LL_SER3
-		add	\rb, \rb, #0x00050000	@ Ser3
-#else
 		add	\rb, \rb, #0x00010000	@ Ser1
-#endif
 		.endm
 #else
 		.macro	loadsp,	rb, tmp1, tmp2
diff --git a/arch/arm/boot/compressed/misc-ep93xx.h b/arch/arm/boot/compressed/misc-ep93xx.h
index 3dc942589cba..65b4121d1490 100644
--- a/arch/arm/boot/compressed/misc-ep93xx.h
+++ b/arch/arm/boot/compressed/misc-ep93xx.h
@@ -57,8 +57,7 @@ static inline void ep93xx_decomp_setup(void)
 	if (machine_is_ts72xx())
 		ts72xx_watchdog_disable();
 
-	if (machine_is_adssphere() ||
-	    machine_is_edb9301() ||
+	if (machine_is_edb9301() ||
 	    machine_is_edb9302() ||
 	    machine_is_edb9302a() ||
 	    machine_is_edb9302a() ||
@@ -69,16 +68,6 @@ static inline void ep93xx_decomp_setup(void)
 	    machine_is_edb9315() ||
 	    machine_is_edb9315a() ||
 	    machine_is_edb9315a() ||
-	    machine_is_gesbc9312() ||
-	    machine_is_micro9() ||
-	    machine_is_micro9l() ||
-	    machine_is_micro9m() ||
-	    machine_is_micro9s() ||
-	    machine_is_micro9m() ||
-	    machine_is_micro9l() ||
-	    machine_is_micro9s() ||
-	    machine_is_sim_one() ||
-	    machine_is_snapper_cl15() ||
 	    machine_is_ts72xx() ||
 	    machine_is_bk3() ||
 	    machine_is_vision_ep9307())
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index cb2e069dc73f..6c41b270560e 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -23,7 +23,9 @@ unsigned int __machine_arch_type;
 #include <linux/types.h>
 #include <linux/linkage.h>
 #include "misc.h"
+#ifdef CONFIG_ARCH_EP93XX
 #include "misc-ep93xx.h"
+#endif
 
 static void putstr(const char *ptr);
 
@@ -101,9 +103,6 @@ static void putstr(const char *ptr)
 /*
  * gzip declarations
  */
-extern char input_data[];
-extern char input_data_end[];
-
 unsigned char *output_data;
 
 unsigned long free_mem_ptr;
@@ -129,9 +128,6 @@ asmlinkage void __div0(void)
 	error("Attempting division by 0!");
 }
 
-extern int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
-
-
 void
 decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 		unsigned long free_mem_ptr_end_p,
@@ -158,7 +154,7 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 		putstr(" done, booting the kernel.\n");
 }
 
-void fortify_panic(const char *name)
+void __fortify_panic(const u8 reason, size_t avail, size_t size)
 {
 	error("detected buffer overflow");
 }
diff --git a/arch/arm/boot/compressed/misc.h b/arch/arm/boot/compressed/misc.h
index c958dccd1d97..8c73940b5fe4 100644
--- a/arch/arm/boot/compressed/misc.h
+++ b/arch/arm/boot/compressed/misc.h
@@ -6,5 +6,16 @@
 void error(char *x) __noreturn;
 extern unsigned long free_mem_ptr;
 extern unsigned long free_mem_end_ptr;
+void __div0(void);
+void
+decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
+		  unsigned long free_mem_ptr_end_p, int arch_id);
+void __fortify_panic(const u8 reason, size_t avail, size_t size);
+int atags_to_fdt(void *atag_list, void *fdt, int total_space);
+uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt);
+int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
+
+extern char input_data[];
+extern char input_data_end[];
 
 #endif
diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S
index 1bcb68ac4b01..d411abd4310e 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.S
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
@@ -23,6 +23,7 @@ SECTIONS
     *(.ARM.extab*)
     *(.note.*)
     *(.rel.*)
+    *(.printk_index)
     /*
      * Discard any r/w data - this produces a link error if we have any,
      * which is required for PIC decompression.  Local data generates
@@ -57,6 +58,7 @@ SECTIONS
     *(.rodata)
     *(.rodata.*)
     *(.data.rel.ro)
+    *(.data.rel.ro.*)
   }
   .piggydata : {
     *(.piggydata)
@@ -123,7 +125,7 @@ SECTIONS
 
   . = BSS_START;
   __bss_start = .;
-  .bss			: { *(.bss) }
+  .bss			: { *(.bss .bss.*) }
   _end = .;
 
   . = ALIGN(8);		/* the stack must be 64-bit aligned */
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 05d8aef6e5d2..efe38eb25301 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1,1627 +1,41 @@
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_ALPINE) += \
-	alpine-db.dtb
-dtb-$(CONFIG_MACH_ARTPEC6) += \
-	artpec6-devboard.dtb
-dtb-$(CONFIG_MACH_ASM9260) += \
-	alphascale-asm9260-devkit.dtb
-# Keep at91 dtb files sorted alphabetically for each SoC
-dtb-$(CONFIG_SOC_AT91RM9200) += \
-	at91rm9200ek.dtb \
-	mpa1600.dtb
-dtb-$(CONFIG_SOC_AT91SAM9) += \
-	animeo_ip.dtb \
-	at91-qil_a9260.dtb \
-	aks-cdu.dtb \
-	ethernut5.dtb \
-	evk-pro3.dtb \
-	tny_a9260.dtb \
-	usb_a9260.dtb \
-	at91sam9260ek.dtb \
-	at91sam9261ek.dtb \
-	at91sam9263ek.dtb \
-	at91-sam9_l9260.dtb \
-	tny_a9263.dtb \
-	usb_a9263.dtb \
-	at91-foxg20.dtb \
-	at91-kizbox.dtb \
-	at91-lmu5000.dtb \
-	at91sam9g20ek.dtb \
-	at91sam9g20ek_2mmc.dtb \
-	tny_a9g20.dtb \
-	usb_a9g20.dtb \
-	usb_a9g20_lpw.dtb \
-	at91sam9m10g45ek.dtb \
-	pm9g45.dtb \
-	at91sam9n12ek.dtb \
-	at91sam9rlek.dtb \
-	at91-ariag25.dtb \
-	at91-ariettag25.dtb \
-	at91-cosino_mega2560.dtb \
-	at91-kizboxmini-base.dtb \
-	at91-kizboxmini-mb.dtb \
-	at91-kizboxmini-rd.dtb \
-	at91-q5xr5.dtb \
-	at91-smartkiz.dtb \
-	at91-wb45n.dtb \
-	at91sam9g15ek.dtb \
-	at91sam9g25-gardena-smart-gateway.dtb \
-	at91sam9g25ek.dtb \
-	at91sam9g35ek.dtb \
-	at91sam9x25ek.dtb \
-	at91sam9x35ek.dtb
-dtb-$(CONFIG_SOC_SAM9X60) += \
-	at91-sam9x60ek.dtb
-dtb-$(CONFIG_SOC_SAM_V7) += \
-	at91-kizbox2-2.dtb \
-	at91-kizbox3-hs.dtb \
-	at91-nattis-2-natte-2.dtb \
-	at91-sama5d27_som1_ek.dtb \
-	at91-sama5d27_wlsom1_ek.dtb \
-	at91-sama5d2_icp.dtb \
-	at91-sama5d2_ptc_ek.dtb \
-	at91-sama5d2_xplained.dtb \
-	at91-sama5d3_ksz9477_evb.dtb \
-	at91-sama5d3_xplained.dtb \
-	at91-dvk_som60.dtb \
-	at91-gatwick.dtb \
-	at91-tse850-3.dtb \
-	at91-wb50n.dtb \
-	sama5d31ek.dtb \
-	sama5d33ek.dtb \
-	sama5d34ek.dtb \
-	sama5d35ek.dtb \
-	sama5d36ek.dtb \
-	sama5d36ek_cmp.dtb \
-	at91-sama5d4_ma5d4evk.dtb \
-	at91-sama5d4_xplained.dtb \
-	at91-sama5d4ek.dtb \
-	at91-vinco.dtb
-dtb-$(CONFIG_SOC_SAMA7G5) += \
-	at91-sama7g5ek.dtb
-dtb-$(CONFIG_SOC_SP7021) += \
-	sunplus-sp7021-demo-v3.dtb
-dtb-$(CONFIG_ARCH_AXXIA) += \
-	axm5516-amarillo.dtb
-dtb-$(CONFIG_ARCH_BCM2835) += \
-	bcm2835-rpi-b.dtb \
-	bcm2835-rpi-a.dtb \
-	bcm2835-rpi-b-rev2.dtb \
-	bcm2835-rpi-b-plus.dtb \
-	bcm2835-rpi-a-plus.dtb \
-	bcm2835-rpi-cm1-io1.dtb \
-	bcm2836-rpi-2-b.dtb \
-	bcm2837-rpi-3-a-plus.dtb \
-	bcm2837-rpi-3-b.dtb \
-	bcm2837-rpi-3-b-plus.dtb \
-	bcm2837-rpi-cm3-io3.dtb \
-	bcm2837-rpi-zero-2-w.dtb \
-	bcm2711-rpi-400.dtb \
-	bcm2711-rpi-4-b.dtb \
-	bcm2711-rpi-cm4-io.dtb \
-	bcm2835-rpi-zero.dtb \
-	bcm2835-rpi-zero-w.dtb
-dtb-$(CONFIG_ARCH_BCM_5301X) += \
-	bcm4708-asus-rt-ac56u.dtb \
-	bcm4708-asus-rt-ac68u.dtb \
-	bcm4708-buffalo-wzr-1750dhp.dtb \
-	bcm4708-buffalo-wzr-1166dhp.dtb \
-	bcm4708-buffalo-wzr-1166dhp2.dtb \
-	bcm4708-linksys-ea6300-v1.dtb \
-	bcm4708-linksys-ea6500-v2.dtb \
-	bcm4708-luxul-xap-1510.dtb \
-	bcm4708-luxul-xwc-1000.dtb \
-	bcm4708-netgear-r6250.dtb \
-	bcm4708-netgear-r6300-v2.dtb \
-	bcm4708-smartrg-sr400ac.dtb \
-	bcm47081-asus-rt-n18u.dtb \
-	bcm47081-buffalo-wzr-600dhp2.dtb \
-	bcm47081-buffalo-wzr-900dhp.dtb \
-	bcm47081-luxul-xap-1410.dtb \
-	bcm47081-luxul-xwr-1200.dtb \
-	bcm47081-tplink-archer-c5-v2.dtb \
-	bcm4709-asus-rt-ac87u.dtb \
-	bcm4709-buffalo-wxr-1900dhp.dtb \
-	bcm4709-linksys-ea9200.dtb \
-	bcm4709-netgear-r7000.dtb \
-	bcm4709-netgear-r8000.dtb \
-	bcm4709-tplink-archer-c9-v1.dtb \
-	bcm47094-asus-rt-ac88u.dtb \
-	bcm47094-dlink-dir-885l.dtb \
-	bcm47094-linksys-panamera.dtb \
-	bcm47094-luxul-abr-4500.dtb \
-	bcm47094-luxul-xap-1610.dtb \
-	bcm47094-luxul-xbr-4500.dtb \
-	bcm47094-luxul-xwc-2000.dtb \
-	bcm47094-luxul-xwr-3100.dtb \
-	bcm47094-luxul-xwr-3150-v1.dtb \
-	bcm47094-netgear-r8500.dtb \
-	bcm47094-phicomm-k3.dtb \
-	bcm53015-meraki-mr26.dtb \
-	bcm53016-meraki-mr32.dtb \
-	bcm94708.dtb \
-	bcm94709.dtb \
-	bcm953012er.dtb \
-	bcm953012hr.dtb \
-	bcm953012k.dtb
-dtb-$(CONFIG_ARCH_BCM_53573) += \
-	bcm47189-luxul-xap-1440.dtb \
-	bcm47189-luxul-xap-810.dtb \
-	bcm47189-tenda-ac9.dtb \
-	bcm947189acdbmr.dtb
-dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
-	bcm911360_entphn.dtb \
-	bcm911360k.dtb \
-	bcm958300k.dtb \
-	bcm958305k.dtb
-dtb-$(CONFIG_ARCH_BCM_HR2) += \
-	bcm53340-ubnt-unifi-switch8.dtb
-dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
-	bcm28155-ap.dtb \
-	bcm21664-garnet.dtb \
-	bcm23550-sparrow.dtb
-dtb-$(CONFIG_ARCH_BCM_NSP) += \
-	bcm958522er.dtb \
-	bcm958525er.dtb \
-	bcm958525xmc.dtb \
-	bcm958622hr.dtb \
-	bcm958623hr.dtb \
-	bcm958625-meraki-mx64.dtb \
-	bcm958625-meraki-mx64-a0.dtb \
-	bcm958625-meraki-mx64w.dtb \
-	bcm958625-meraki-mx64w-a0.dtb \
-	bcm958625-meraki-mx65.dtb \
-	bcm958625-meraki-mx65w.dtb \
-	bcm958625hr.dtb \
-	bcm988312hr.dtb \
-	bcm958625k.dtb
-dtb-$(CONFIG_ARCH_BERLIN) += \
-	berlin2-sony-nsz-gs7.dtb \
-	berlin2cd-google-chromecast.dtb \
-	berlin2cd-valve-steamlink.dtb \
-	berlin2q-marvell-dmp.dtb
-dtb-$(CONFIG_ARCH_BRCMSTB) += \
-	bcm7445-bcm97445svmb.dtb
-dtb-$(CONFIG_ARCH_BCMBCA) += \
-	bcm947622.dtb \
-	bcm963138.dtb \
-	bcm963138dvt.dtb \
-	bcm963148.dtb \
-	bcm963178.dtb \
-	bcm96756.dtb \
-	bcm96846.dtb \
-	bcm96855.dtb \
-	bcm96878.dtb
-dtb-$(CONFIG_ARCH_CLPS711X) += \
-	ep7211-edb7211.dtb
-dtb-$(CONFIG_ARCH_DAVINCI) += \
-	da850-lcdk.dtb \
-	da850-enbw-cmc.dtb \
-	da850-evm.dtb \
-	da850-lego-ev3.dtb
-dtb-$(CONFIG_ARCH_DIGICOLOR) += \
-	cx92755_equinox.dtb
-dtb-$(CONFIG_ARCH_AIROHA) += \
-	en7523-evb.dtb
-dtb-$(CONFIG_ARCH_EXYNOS3) += \
-	exynos3250-artik5-eval.dtb \
-	exynos3250-monk.dtb \
-	exynos3250-rinato.dtb
-dtb-$(CONFIG_ARCH_EXYNOS4) += \
-	exynos4210-i9100.dtb \
-	exynos4210-origen.dtb \
-	exynos4210-smdkv310.dtb \
-	exynos4210-trats.dtb \
-	exynos4210-universal_c210.dtb \
-	exynos4412-i9300.dtb \
-	exynos4412-i9305.dtb \
-	exynos4412-itop-elite.dtb \
-	exynos4412-n710x.dtb \
-	exynos4412-odroidu3.dtb \
-	exynos4412-odroidx.dtb \
-	exynos4412-odroidx2.dtb \
-	exynos4412-origen.dtb \
-	exynos4412-p4note-n8010.dtb \
-	exynos4412-smdk4412.dtb \
-	exynos4412-tiny4412.dtb \
-	exynos4412-trats2.dtb
-dtb-$(CONFIG_ARCH_EXYNOS5) += \
-	exynos5250-arndale.dtb \
-	exynos5250-smdk5250.dtb \
-	exynos5250-snow.dtb \
-	exynos5250-snow-rev5.dtb \
-	exynos5250-spring.dtb \
-	exynos5260-xyref5260.dtb \
-	exynos5410-odroidxu.dtb \
-	exynos5410-smdk5410.dtb \
-	exynos5420-arndale-octa.dtb \
-	exynos5420-peach-pit.dtb \
-	exynos5420-smdk5420.dtb \
-	exynos5420-chagall-wifi.dtb \
-	exynos5420-klimt-wifi.dtb \
-	exynos5422-odroidhc1.dtb \
-	exynos5422-odroidxu3.dtb \
-	exynos5422-odroidxu3-lite.dtb \
-	exynos5422-odroidxu4.dtb \
-	exynos5800-peach-pi.dtb
-dtb-$(CONFIG_ARCH_GEMINI) += \
-	gemini-dlink-dir-685.dtb \
-	gemini-dlink-dns-313.dtb \
-	gemini-nas4220b.dtb \
-	gemini-ns2502.dtb \
-	gemini-rut1xx.dtb \
-	gemini-sl93512r.dtb \
-	gemini-sq201.dtb \
-	gemini-ssi1328.dtb \
-	gemini-wbd111.dtb \
-	gemini-wbd222.dtb
-dtb-$(CONFIG_ARCH_HI3xxx) += \
-	hi3620-hi4511.dtb
-dtb-$(CONFIG_ARCH_HIGHBANK) += \
-	highbank.dtb \
-	ecx-2000.dtb
-dtb-$(CONFIG_ARCH_HIP01) += \
-	hip01-ca9x2.dtb
-dtb-$(CONFIG_ARCH_HIP04) += \
-	hip04-d01.dtb
-dtb-$(CONFIG_ARCH_HISI) += \
-	hi3519-demb.dtb
-dtb-$(CONFIG_ARCH_HIX5HD2) += \
-	hisi-x5hd2-dkb.dtb
-dtb-$(CONFIG_ARCH_HPE_GXP) += \
-	hpe-bmc-dl360gen10.dtb
-dtb-$(CONFIG_ARCH_INTEGRATOR) += \
-	integratorap.dtb \
-	integratorap-im-pd1.dtb \
-	integratorcp.dtb
-dtb-$(CONFIG_ARCH_IXP4XX) += \
-	intel-ixp42x-linksys-nslu2.dtb \
-	intel-ixp42x-linksys-wrv54g.dtb \
-	intel-ixp42x-freecom-fsg-3.dtb \
-	intel-ixp42x-welltech-epbx100.dtb \
-	intel-ixp42x-ixdp425.dtb \
-	intel-ixp43x-kixrp435.dtb \
-	intel-ixp46x-ixdp465.dtb \
-	intel-ixp42x-adi-coyote.dtb \
-	intel-ixp42x-ixdpg425.dtb \
-	intel-ixp42x-goramo-multilink.dtb \
-	intel-ixp42x-iomega-nas100d.dtb \
-	intel-ixp42x-dlink-dsm-g600.dtb \
-	intel-ixp42x-gateworks-gw2348.dtb \
-	intel-ixp43x-gateworks-gw2358.dtb \
-	intel-ixp42x-netgear-wg302v1.dtb \
-	intel-ixp42x-arcom-vulcan.dtb \
-	intel-ixp42x-gateway-7001.dtb
-dtb-$(CONFIG_ARCH_KEYSTONE) += \
-	keystone-k2hk-evm.dtb \
-	keystone-k2l-evm.dtb \
-	keystone-k2e-evm.dtb \
-	keystone-k2g-evm.dtb \
-	keystone-k2g-ice.dtb
-dtb-$(CONFIG_MACH_KIRKWOOD) += \
-	kirkwood-b3.dtb \
-	kirkwood-blackarmor-nas220.dtb \
-	kirkwood-c200-v1.dtb \
-	kirkwood-cloudbox.dtb \
-	kirkwood-d2net.dtb \
-	kirkwood-db-88f6281.dtb \
-	kirkwood-db-88f6282.dtb \
-	kirkwood-dir665.dtb \
-	kirkwood-dns320.dtb \
-	kirkwood-dns325.dtb \
-	kirkwood-dockstar.dtb \
-	kirkwood-dreamplug.dtb \
-	kirkwood-ds109.dtb \
-	kirkwood-ds110jv10.dtb \
-	kirkwood-ds111.dtb \
-	kirkwood-ds112.dtb \
-	kirkwood-ds209.dtb \
-	kirkwood-ds210.dtb \
-	kirkwood-ds212.dtb \
-	kirkwood-ds212j.dtb \
-	kirkwood-ds409.dtb \
-	kirkwood-ds409slim.dtb \
-	kirkwood-ds411.dtb \
-	kirkwood-ds411j.dtb \
-	kirkwood-ds411slim.dtb \
-	kirkwood-goflexnet.dtb \
-	kirkwood-guruplug-server-plus.dtb \
-	kirkwood-ib62x0.dtb \
-	kirkwood-iconnect.dtb \
-	kirkwood-iomega_ix2_200.dtb \
-	kirkwood-is2.dtb \
-	kirkwood-km_kirkwood.dtb \
-	kirkwood-l-50.dtb \
-	kirkwood-laplug.dtb \
-	kirkwood-linkstation-lsqvl.dtb \
-	kirkwood-linkstation-lsvl.dtb \
-	kirkwood-linkstation-lswsxl.dtb \
-	kirkwood-linkstation-lswvl.dtb \
-	kirkwood-linkstation-lswxl.dtb \
-	kirkwood-linksys-viper.dtb \
-	kirkwood-lschlv2.dtb \
-	kirkwood-lsxhl.dtb \
-	kirkwood-mplcec4.dtb \
-	kirkwood-mv88f6281gtw-ge.dtb \
-	kirkwood-nas2big.dtb \
-	kirkwood-net2big.dtb \
-	kirkwood-net5big.dtb \
-	kirkwood-netgear_readynas_duo_v2.dtb \
-	kirkwood-netgear_readynas_nv+_v2.dtb \
-	kirkwood-ns2.dtb \
-	kirkwood-ns2lite.dtb \
-	kirkwood-ns2max.dtb \
-	kirkwood-ns2mini.dtb \
-	kirkwood-nsa310.dtb \
-	kirkwood-nsa310a.dtb \
-	kirkwood-nsa320.dtb \
-	kirkwood-nsa325.dtb \
-	kirkwood-openblocks_a6.dtb \
-	kirkwood-openblocks_a7.dtb \
-	kirkwood-openrd-base.dtb \
-	kirkwood-openrd-client.dtb \
-	kirkwood-openrd-ultimate.dtb \
-	kirkwood-pogo_e02.dtb \
-	kirkwood-pogoplug-series-4.dtb \
-	kirkwood-rd88f6192.dtb \
-	kirkwood-rd88f6281-z0.dtb \
-	kirkwood-rd88f6281-a.dtb \
-	kirkwood-rs212.dtb \
-	kirkwood-rs409.dtb \
-	kirkwood-rs411.dtb \
-	kirkwood-sheevaplug.dtb \
-	kirkwood-sheevaplug-esata.dtb \
-	kirkwood-t5325.dtb \
-	kirkwood-topkick.dtb \
-	kirkwood-ts219-6281.dtb \
-	kirkwood-ts219-6282.dtb \
-	kirkwood-ts419-6281.dtb \
-	kirkwood-ts419-6282.dtb
-dtb-$(CONFIG_ARCH_LPC18XX) += \
-	lpc4337-ciaa.dtb \
-	lpc4350-hitex-eval.dtb \
-	lpc4357-ea4357-devkit.dtb \
-	lpc4357-myd-lpc4357.dtb
-dtb-$(CONFIG_ARCH_LPC32XX) += \
-	lpc3250-ea3250.dtb \
-	lpc3250-phy3250.dtb
-dtb-$(CONFIG_ARCH_WPCM450) += \
-	nuvoton-wpcm450-supermicro-x9sci-ln4f.dtb
-dtb-$(CONFIG_ARCH_NPCM7XX) += \
-	nuvoton-npcm730-gsj.dtb \
-	nuvoton-npcm730-gbs.dtb \
-	nuvoton-npcm730-kudo.dtb \
-	nuvoton-npcm750-evb.dtb \
-	nuvoton-npcm750-runbmc-olympus.dtb
-dtb-$(CONFIG_MACH_MESON6) += \
-	meson6-atv1200.dtb
-dtb-$(CONFIG_MACH_MESON8) += \
-	meson8-minix-neo-x8.dtb \
-	meson8b-ec100.dtb \
-	meson8b-mxq.dtb \
-	meson8b-odroidc1.dtb \
-	meson8m2-mxiii-plus.dtb
-dtb-$(CONFIG_ARCH_MMP) += \
-	pxa168-aspenite.dtb \
-	pxa910-dkb.dtb \
-	mmp2-brownstone.dtb \
-	mmp2-olpc-xo-1-75.dtb \
-	mmp3-dell-ariel.dtb
-dtb-$(CONFIG_ARCH_MPS2) += \
-	mps2-an385.dtb \
-	mps2-an399.dtb
-dtb-$(CONFIG_ARCH_MOXART) += \
-	moxart-uc7112lx.dtb
-dtb-$(CONFIG_ARCH_SD5203) += \
-	sd5203.dtb
-dtb-$(CONFIG_SOC_IMX1) += \
-	imx1-ads.dtb \
-	imx1-apf9328.dtb
-dtb-$(CONFIG_SOC_IMX25) += \
-	imx25-eukrea-mbimxsd25-baseboard.dtb \
-	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \
-	imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
-	imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
-	imx25-karo-tx25.dtb \
-	imx25-pdk.dtb
-dtb-$(CONFIG_SOC_IMX27) += \
-	imx27-apf27.dtb \
-	imx27-apf27dev.dtb \
-	imx27-eukrea-mbimxsd27-baseboard.dtb \
-	imx27-pdk.dtb \
-	imx27-phytec-phycore-rdk.dtb \
-	imx27-phytec-phycard-s-rdk.dtb
-dtb-$(CONFIG_SOC_IMX31) += \
-	imx31-bug.dtb \
-	imx31-lite.dtb
-dtb-$(CONFIG_SOC_IMX35) += \
-	imx35-eukrea-mbimxsd35-baseboard.dtb \
-	imx35-pdk.dtb
-dtb-$(CONFIG_SOC_IMX50) += \
-	imx50-evk.dtb \
-	imx50-kobo-aura.dtb
-dtb-$(CONFIG_SOC_IMX51) += \
-	imx51-apf51.dtb \
-	imx51-apf51dev.dtb \
-	imx51-babbage.dtb \
-	imx51-digi-connectcore-jsk.dtb \
-	imx51-eukrea-mbimxsd51-baseboard.dtb \
-	imx51-ts4800.dtb \
-	imx51-zii-rdu1.dtb \
-	imx51-zii-scu2-mezz.dtb \
-	imx51-zii-scu3-esb.dtb
-dtb-$(CONFIG_SOC_IMX53) += \
-	imx53-ard.dtb \
-	imx53-cx9020.dtb \
-	imx53-kp-ddc.dtb \
-	imx53-kp-hsc.dtb \
-	imx53-m53evk.dtb \
-	imx53-m53menlo.dtb \
-	imx53-mba53.dtb \
-	imx53-ppd.dtb \
-	imx53-qsb.dtb \
-	imx53-qsrb.dtb \
-	imx53-smd.dtb \
-	imx53-tx53-x03x.dtb \
-	imx53-tx53-x13x.dtb \
-	imx53-usbarmory.dtb \
-	imx53-voipac-bsb.dtb
-dtb-$(CONFIG_SOC_IMX6Q) += \
-	imx6dl-alti6p.dtb \
-	imx6dl-apf6dev.dtb \
-	imx6dl-aristainetos_4.dtb \
-	imx6dl-aristainetos_7.dtb \
-	imx6dl-aristainetos2_4.dtb \
-	imx6dl-aristainetos2_7.dtb \
-	imx6dl-colibri-aster.dtb \
-	imx6dl-colibri-eval-v3.dtb \
-	imx6dl-colibri-iris.dtb \
-	imx6dl-colibri-iris-v2.dtb \
-	imx6dl-cubox-i.dtb \
-	imx6dl-cubox-i-emmc-som-v15.dtb \
-	imx6dl-cubox-i-som-v15.dtb \
-	imx6dl-dfi-fs700-m60.dtb \
-	imx6dl-dhcom-picoitx.dtb \
-	imx6dl-eckelmann-ci4x10.dtb \
-	imx6dl-emcon-avari.dtb \
-	imx6dl-gw51xx.dtb \
-	imx6dl-gw52xx.dtb \
-	imx6dl-gw53xx.dtb \
-	imx6dl-gw54xx.dtb \
-	imx6dl-gw551x.dtb \
-	imx6dl-gw552x.dtb \
-	imx6dl-gw553x.dtb \
-	imx6dl-gw560x.dtb \
-	imx6dl-gw5903.dtb \
-	imx6dl-gw5904.dtb \
-	imx6dl-gw5907.dtb \
-	imx6dl-gw5910.dtb \
-	imx6dl-gw5912.dtb \
-	imx6dl-gw5913.dtb \
-	imx6dl-hummingboard.dtb \
-	imx6dl-hummingboard-emmc-som-v15.dtb \
-	imx6dl-hummingboard-som-v15.dtb \
-	imx6dl-hummingboard2.dtb \
-	imx6dl-hummingboard2-emmc-som-v15.dtb \
-	imx6dl-hummingboard2-som-v15.dtb \
-	imx6dl-icore.dtb \
-	imx6dl-icore-mipi.dtb \
-	imx6dl-icore-rqs.dtb \
-	imx6dl-lanmcu.dtb \
-	imx6dl-mamoj.dtb \
-	imx6dl-mba6a.dtb \
-	imx6dl-mba6b.dtb \
-	imx6dl-nit6xlite.dtb \
-	imx6dl-nitrogen6x.dtb \
-	imx6dl-phytec-mira-rdk-nand.dtb \
-	imx6dl-phytec-pbab01.dtb \
-	imx6dl-pico-dwarf.dtb \
-	imx6dl-pico-hobbit.dtb \
-	imx6dl-pico-nymph.dtb \
-	imx6dl-pico-pi.dtb \
-	imx6dl-plybas.dtb \
-	imx6dl-plym2m.dtb \
-	imx6dl-prtmvt.dtb \
-	imx6dl-prtrvt.dtb \
-	imx6dl-prtvt7.dtb \
-	imx6dl-rex-basic.dtb \
-	imx6dl-riotboard.dtb \
-	imx6dl-sabreauto.dtb \
-	imx6dl-sabrelite.dtb \
-	imx6dl-sabresd.dtb \
-	imx6dl-savageboard.dtb \
-	imx6dl-skov-revc-lt2.dtb \
-	imx6dl-skov-revc-lt6.dtb \
-	imx6dl-solidsense.dtb \
-	imx6dl-ts4900.dtb \
-	imx6dl-ts7970.dtb \
-	imx6dl-tx6dl-comtft.dtb \
-	imx6dl-tx6s-8034.dtb \
-	imx6dl-tx6s-8034-mb7.dtb \
-	imx6dl-tx6s-8035.dtb \
-	imx6dl-tx6s-8035-mb7.dtb \
-	imx6dl-tx6u-801x.dtb \
-	imx6dl-tx6u-80xx-mb7.dtb \
-	imx6dl-tx6u-8033.dtb \
-	imx6dl-tx6u-8033-mb7.dtb \
-	imx6dl-tx6u-811x.dtb \
-	imx6dl-tx6u-81xx-mb7.dtb \
-	imx6dl-udoo.dtb \
-	imx6dl-victgo.dtb \
-	imx6dl-vicut1.dtb \
-	imx6dl-wandboard.dtb \
-	imx6dl-wandboard-revb1.dtb \
-	imx6dl-wandboard-revd1.dtb \
-	imx6dl-yapp4-draco.dtb \
-	imx6dl-yapp4-hydra.dtb \
-	imx6dl-yapp4-orion.dtb \
-	imx6dl-yapp4-ursa.dtb \
-	imx6q-apalis-eval.dtb \
-	imx6q-apalis-ixora.dtb \
-	imx6q-apalis-ixora-v1.1.dtb \
-	imx6q-apalis-ixora-v1.2.dtb \
-	imx6q-apf6dev.dtb \
-	imx6q-arm2.dtb \
-	imx6q-b450v3.dtb \
-	imx6q-b650v3.dtb \
-	imx6q-b850v3.dtb \
-	imx6q-bosch-acc.dtb \
-	imx6q-cm-fx6.dtb \
-	imx6q-cubox-i.dtb \
-	imx6q-cubox-i-emmc-som-v15.dtb \
-	imx6q-cubox-i-som-v15.dtb \
-	imx6q-dfi-fs700-m60.dtb \
-	imx6q-dhcom-pdk2.dtb \
-	imx6q-display5-tianma-tm070-1280x768.dtb \
-	imx6q-dmo-edmqmx6.dtb \
-	imx6q-dms-ba16.dtb \
-	imx6q-ds.dtb \
-	imx6q-emcon-avari.dtb \
-	imx6q-evi.dtb \
-	imx6dl-b105pv2.dtb \
-	imx6dl-b105v2.dtb \
-	imx6dl-b125v2.dtb \
-	imx6dl-b125pv2.dtb \
-	imx6dl-b155v2.dtb \
-	imx6q-gk802.dtb \
-	imx6q-gw51xx.dtb \
-	imx6q-gw52xx.dtb \
-	imx6q-gw53xx.dtb \
-	imx6q-gw5400-a.dtb \
-	imx6q-gw54xx.dtb \
-	imx6q-gw551x.dtb \
-	imx6q-gw552x.dtb \
-	imx6q-gw553x.dtb \
-	imx6q-gw560x.dtb \
-	imx6q-gw5903.dtb \
-	imx6q-gw5904.dtb \
-	imx6q-gw5907.dtb \
-	imx6q-gw5910.dtb \
-	imx6q-gw5912.dtb \
-	imx6q-gw5913.dtb \
-	imx6q-h100.dtb \
-	imx6q-hummingboard.dtb \
-	imx6q-hummingboard-emmc-som-v15.dtb \
-	imx6q-hummingboard-som-v15.dtb \
-	imx6q-hummingboard2.dtb \
-	imx6q-hummingboard2-emmc-som-v15.dtb \
-	imx6q-hummingboard2-som-v15.dtb \
-	imx6q-icore.dtb \
-	imx6q-icore-mipi.dtb \
-	imx6q-icore-ofcap10.dtb \
-	imx6q-icore-ofcap12.dtb \
-	imx6q-icore-rqs.dtb \
-	imx6q-kp-tpc.dtb \
-	imx6q-logicpd.dtb \
-	imx6q-marsboard.dtb \
-	imx6q-mba6a.dtb \
-	imx6q-mba6b.dtb \
-	imx6q-mccmon6.dtb \
-	imx6q-nitrogen6x.dtb \
-	imx6q-nitrogen6_max.dtb \
-	imx6q-nitrogen6_som2.dtb \
-	imx6q-novena.dtb \
-	imx6q-phytec-mira-rdk-emmc.dtb \
-	imx6q-phytec-mira-rdk-nand.dtb \
-	imx6q-phytec-pbab01.dtb \
-	imx6q-pico-dwarf.dtb \
-	imx6q-pico-hobbit.dtb \
-	imx6q-pico-nymph.dtb \
-	imx6q-pico-pi.dtb \
-	imx6q-pistachio.dtb \
-	imx6q-prti6q.dtb \
-	imx6q-prtwd2.dtb \
-	imx6q-rex-pro.dtb \
-	imx6q-sabreauto.dtb \
-	imx6q-sabrelite.dtb \
-	imx6q-sabresd.dtb \
-	imx6q-savageboard.dtb \
-	imx6q-sbc6x.dtb \
-	imx6q-skov-revc-lt2.dtb \
-	imx6q-skov-revc-lt6.dtb \
-	imx6q-skov-reve-mi1010ait-1cp1.dtb \
-	imx6q-solidsense.dtb \
-	imx6q-tbs2910.dtb \
-	imx6q-ts4900.dtb \
-	imx6q-ts7970.dtb \
-	imx6q-tx6q-1010.dtb \
-	imx6q-tx6q-1010-comtft.dtb \
-	imx6q-tx6q-1020.dtb \
-	imx6q-tx6q-1020-comtft.dtb \
-	imx6q-tx6q-1036.dtb \
-	imx6q-tx6q-1036-mb7.dtb \
-	imx6q-tx6q-10x0-mb7.dtb \
-	imx6q-tx6q-1110.dtb \
-	imx6q-tx6q-11x0-mb7.dtb \
-	imx6q-udoo.dtb \
-	imx6q-utilite-pro.dtb \
-	imx6q-var-dt6customboard.dtb \
-	imx6q-vicut1.dtb \
-	imx6q-wandboard.dtb \
-	imx6q-wandboard-revb1.dtb \
-	imx6q-wandboard-revd1.dtb \
-	imx6q-yapp4-crux.dtb \
-	imx6q-zii-rdu2.dtb \
-	imx6qp-mba6b.dtb \
-	imx6qp-nitrogen6_max.dtb \
-	imx6qp-nitrogen6_som2.dtb \
-	imx6qp-phytec-mira-rdk-nand.dtb \
-	imx6qp-prtwd3.dtb \
-	imx6qp-sabreauto.dtb \
-	imx6qp-sabresd.dtb \
-	imx6qp-tx6qp-8037.dtb \
-	imx6qp-tx6qp-8037-mb7.dtb \
-	imx6qp-tx6qp-8137.dtb \
-	imx6qp-tx6qp-8137-mb7.dtb \
-	imx6qp-vicutp.dtb \
-	imx6qp-wandboard-revd1.dtb \
-	imx6qp-yapp4-crux-plus.dtb \
-	imx6qp-zii-rdu2.dtb \
-	imx6s-dhcom-drc02.dtb
-dtb-$(CONFIG_SOC_IMX6SL) += \
-	imx6sl-evk.dtb \
-	imx6sl-tolino-shine2hd.dtb \
-	imx6sl-tolino-shine3.dtb \
-	imx6sl-tolino-vision5.dtb \
-	imx6sl-warp.dtb
-dtb-$(CONFIG_SOC_IMX6SLL) += \
-	imx6sll-evk.dtb \
-	imx6sll-kobo-clarahd.dtb \
-	imx6sll-kobo-librah2o.dtb
-dtb-$(CONFIG_SOC_IMX6SX) += \
-	imx6sx-nitrogen6sx.dtb \
-	imx6sx-sabreauto.dtb \
-	imx6sx-sdb-reva.dtb \
-	imx6sx-sdb-sai.dtb \
-	imx6sx-sdb.dtb \
-	imx6sx-sdb-mqs.dtb \
-	imx6sx-softing-vining-2000.dtb \
-	imx6sx-udoo-neo-basic.dtb \
-	imx6sx-udoo-neo-extended.dtb \
-	imx6sx-udoo-neo-full.dtb
-dtb-$(CONFIG_SOC_IMX6UL) += \
-	imx6ul-14x14-evk.dtb \
-	imx6ul-ccimx6ulsbcexpress.dtb \
-	imx6ul-ccimx6ulsbcpro.dtb \
-	imx6ul-geam.dtb \
-	imx6ul-isiot-emmc.dtb \
-	imx6ul-isiot-nand.dtb \
-	imx6ul-kontron-n6310-s.dtb \
-	imx6ul-kontron-n6310-s-43.dtb \
-	imx6ul-liteboard.dtb \
-	imx6ul-tqma6ul1-mba6ulx.dtb \
-	imx6ul-tqma6ul2-mba6ulx.dtb \
-	imx6ul-tqma6ul2l-mba6ulx.dtb \
-	imx6ul-opos6uldev.dtb \
-	imx6ul-pico-dwarf.dtb \
-	imx6ul-pico-hobbit.dtb \
-	imx6ul-pico-pi.dtb \
-	imx6ul-phytec-segin-ff-rdk-emmc.dtb \
-	imx6ul-phytec-segin-ff-rdk-nand.dtb \
-	imx6ul-prti6g.dtb \
-	imx6ul-tx6ul-0010.dtb \
-	imx6ul-tx6ul-0011.dtb \
-	imx6ul-tx6ul-mainboard.dtb \
-	imx6ull-14x14-evk.dtb \
-	imx6ull-colibri-aster.dtb \
-	imx6ull-colibri-emmc-aster.dtb \
-	imx6ull-colibri-emmc-eval-v3.dtb \
-	imx6ull-colibri-emmc-iris.dtb \
-	imx6ull-colibri-emmc-iris-v2.dtb \
-	imx6ull-colibri-eval-v3.dtb \
-	imx6ull-colibri-iris.dtb \
-	imx6ull-colibri-iris-v2.dtb \
-	imx6ull-colibri-wifi-aster.dtb \
-	imx6ull-colibri-wifi-eval-v3.dtb \
-	imx6ull-colibri-wifi-iris.dtb \
-	imx6ull-colibri-wifi-iris-v2.dtb \
-	imx6ull-jozacp.dtb \
-	imx6ull-myir-mys-6ulx-eval.dtb \
-	imx6ull-opos6uldev.dtb \
-	imx6ull-phytec-segin-ff-rdk-nand.dtb \
-	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
-	imx6ull-phytec-segin-lc-rdk-nand.dtb \
-	imx6ull-phytec-tauri-emmc.dtb \
-	imx6ull-phytec-tauri-nand.dtb \
-	imx6ull-tqma6ull2-mba6ulx.dtb \
-	imx6ull-tqma6ull2l-mba6ulx.dtb \
-	imx6ulz-14x14-evk.dtb \
-	imx6ulz-bsh-smm-m2.dtb
-dtb-$(CONFIG_SOC_IMX7D) += \
-	imx7d-cl-som-imx7.dtb \
-	imx7d-colibri-aster.dtb \
-	imx7d-colibri-emmc-aster.dtb \
-	imx7d-colibri-emmc-iris.dtb \
-	imx7d-colibri-emmc-iris-v2.dtb \
-	imx7d-colibri-emmc-eval-v3.dtb \
-	imx7d-colibri-eval-v3.dtb \
-	imx7d-colibri-iris.dtb \
-	imx7d-colibri-iris-v2.dtb \
-	imx7d-flex-concentrator.dtb \
-	imx7d-flex-concentrator-mfg.dtb \
-	imx7d-mba7.dtb \
-	imx7d-meerkat96.dtb \
-	imx7d-nitrogen7.dtb \
-	imx7d-pico-dwarf.dtb \
-	imx7d-pico-hobbit.dtb \
-	imx7d-pico-nymph.dtb \
-	imx7d-pico-pi.dtb \
-	imx7d-remarkable2.dtb \
-	imx7d-sbc-imx7.dtb \
-	imx7d-sdb.dtb \
-	imx7d-sdb-reva.dtb \
-	imx7d-sdb-sht11.dtb \
-	imx7d-smegw01.dtb \
-	imx7d-zii-rmu2.dtb \
-	imx7d-zii-rpu2.dtb \
-	imx7s-colibri-aster.dtb \
-	imx7s-colibri-eval-v3.dtb \
-	imx7s-colibri-iris.dtb \
-	imx7s-colibri-iris-v2.dtb \
-	imx7s-mba7.dtb \
-	imx7s-warp.dtb
-dtb-$(CONFIG_SOC_IMX7ULP) += \
-	imx7ulp-com.dtb \
-	imx7ulp-evk.dtb
-dtb-$(CONFIG_SOC_IMXRT) += \
-	imxrt1050-evk.dtb
-dtb-$(CONFIG_SOC_LAN966) += \
-	lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \
-	lan966x-kontron-kswitch-d10-mmt-8g.dtb \
-	lan966x-pcb8291.dtb \
-	lan966x-pcb8309.dtb
-dtb-$(CONFIG_SOC_LS1021A) += \
-	ls1021a-iot.dtb \
-	ls1021a-moxa-uc-8410a.dtb \
-	ls1021a-qds.dtb \
-	ls1021a-tsn.dtb \
-	ls1021a-twr.dtb
-dtb-$(CONFIG_SOC_VF610) += \
-	vf500-colibri-eval-v3.dtb \
-	vf610-bk4.dtb \
-	vf610-colibri-eval-v3.dtb \
-	vf610m4-colibri.dtb \
-	vf610-cosmic.dtb \
-	vf610m4-cosmic.dtb \
-	vf610-twr.dtb \
-	vf610-zii-cfu1.dtb \
-	vf610-zii-dev-rev-b.dtb \
-	vf610-zii-dev-rev-c.dtb \
-	vf610-zii-scu4-aib.dtb \
-	vf610-zii-spb4.dtb \
-	vf610-zii-ssmb-dtu.dtb \
-	vf610-zii-ssmb-spu3.dtb
-dtb-$(CONFIG_ARCH_MXS) += \
-	imx23-evk.dtb \
-	imx23-olinuxino.dtb \
-	imx23-sansa.dtb \
-	imx23-stmp378x_devb.dtb \
-	imx23-xfi3.dtb \
-	imx28-apf28.dtb \
-	imx28-apf28dev.dtb \
-	imx28-apx4devkit.dtb \
-	imx28-cfa10036.dtb \
-	imx28-cfa10037.dtb \
-	imx28-cfa10049.dtb \
-	imx28-cfa10055.dtb \
-	imx28-cfa10056.dtb \
-	imx28-cfa10057.dtb \
-	imx28-cfa10058.dtb \
-	imx28-duckbill-2-485.dtb \
-	imx28-duckbill-2.dtb \
-	imx28-duckbill-2-enocean.dtb \
-	imx28-duckbill-2-spi.dtb \
-	imx28-duckbill.dtb \
-	imx28-eukrea-mbmx283lc.dtb \
-	imx28-eukrea-mbmx287lc.dtb \
-	imx28-evk.dtb \
-	imx28-m28cu3.dtb \
-	imx28-m28evk.dtb \
-	imx28-sps1.dtb \
-	imx28-ts4600.dtb \
-	imx28-tx28.dtb \
-	imx28-xea.dtb
-dtb-$(CONFIG_ARCH_NOMADIK) += \
-	ste-nomadik-s8815.dtb \
-	ste-nomadik-nhk15.dtb
-dtb-$(CONFIG_ARCH_NSPIRE) += \
-	nspire-cx.dtb \
-	nspire-tp.dtb \
-	nspire-clp.dtb
-dtb-$(CONFIG_ARCH_OMAP2) += \
-	omap2420-h4.dtb \
-	omap2420-n800.dtb \
-	omap2420-n810.dtb \
-	omap2420-n810-wimax.dtb \
-	omap2430-sdp.dtb
-dtb-$(CONFIG_ARCH_OMAP3) += \
-	am3517-craneboard.dtb \
-	am3517-evm.dtb \
-	am3517_mt_ventoux.dtb \
-	logicpd-torpedo-37xx-devkit.dtb \
-	logicpd-som-lv-37xx-devkit.dtb \
-	omap3430-sdp.dtb \
-	omap3-beagle.dtb \
-	omap3-beagle-ab4.dtb \
-	omap3-beagle-xm.dtb \
-	omap3-beagle-xm-ab.dtb \
-	omap3-cm-t3517.dtb \
-	omap3-cm-t3530.dtb \
-	omap3-cm-t3730.dtb \
-	omap3-devkit8000.dtb \
-	omap3-devkit8000-lcd43.dtb \
-	omap3-devkit8000-lcd70.dtb \
-	omap3-echo.dtb \
-	omap3-evm.dtb \
-	omap3-evm-37xx.dtb \
-	omap3-gta04a3.dtb \
-	omap3-gta04a4.dtb \
-	omap3-gta04a5.dtb \
-	omap3-gta04a5one.dtb \
-	omap3-ha.dtb \
-	omap3-ha-lcd.dtb \
-	omap3-igep0020.dtb \
-	omap3-igep0020-rev-f.dtb \
-	omap3-igep0030.dtb \
-	omap3-igep0030-rev-g.dtb \
-	omap3-ldp.dtb \
-	omap3-lilly-dbb056.dtb \
-	omap3-n900.dtb \
-	omap3-n9.dtb \
-	omap3-n950.dtb \
-	omap3-overo-alto35.dtb \
-	omap3-overo-chestnut43.dtb \
-	omap3-overo-gallop43.dtb \
-	omap3-overo-palo35.dtb \
-	omap3-overo-palo43.dtb \
-	omap3-overo-storm-alto35.dtb \
-	omap3-overo-storm-chestnut43.dtb \
-	omap3-overo-storm-gallop43.dtb \
-	omap3-overo-storm-palo35.dtb \
-	omap3-overo-storm-palo43.dtb \
-	omap3-overo-storm-summit.dtb \
-	omap3-overo-storm-tobi.dtb \
-	omap3-overo-storm-tobiduo.dtb \
-	omap3-overo-summit.dtb \
-	omap3-overo-tobi.dtb \
-	omap3-overo-tobiduo.dtb \
-	omap3-pandora-600mhz.dtb \
-	omap3-pandora-1ghz.dtb \
-	omap3-sbc-t3517.dtb \
-	omap3-sbc-t3530.dtb \
-	omap3-sbc-t3730.dtb \
-	omap3-sniper.dtb \
-	omap3-thunder.dtb \
-	omap3-zoom3.dtb
-dtb-$(CONFIG_SOC_TI81XX) += \
-	am3874-iceboard.dtb \
-	dm8148-evm.dtb \
-	dm8148-t410.dtb \
-	dm8168-evm.dtb \
-	dra62x-j5eco-evm.dtb
-dtb-$(CONFIG_SOC_AM33XX) += \
-	am335x-baltos-ir2110.dtb \
-	am335x-baltos-ir3220.dtb \
-	am335x-baltos-ir5221.dtb \
-	am335x-base0033.dtb \
-	am335x-bone.dtb \
-	am335x-boneblack.dtb \
-	am335x-boneblack-wireless.dtb \
-	am335x-boneblue.dtb \
-	am335x-bonegreen.dtb \
-	am335x-bonegreen-wireless.dtb \
-	am335x-chiliboard.dtb \
-	am335x-cm-t335.dtb \
-	am335x-evm.dtb \
-	am335x-evmsk.dtb \
-	am335x-guardian.dtb \
-	am335x-icev2.dtb \
-	am335x-lxm.dtb \
-	am335x-moxa-uc-2101.dtb \
-	am335x-moxa-uc-8100-me-t.dtb \
-	am335x-myirtech-myd.dtb \
-	am335x-nano.dtb \
-	am335x-netcan-plus-1xx.dtb \
-	am335x-netcom-plus-2xx.dtb \
-	am335x-netcom-plus-8xx.dtb \
-	am335x-pdu001.dtb \
-	am335x-pepper.dtb \
-	am335x-phycore-rdk.dtb \
-	am335x-pocketbeagle.dtb \
-	am335x-regor-rdk.dtb \
-	am335x-sancloud-bbe.dtb \
-	am335x-sancloud-bbe-lite.dtb \
-	am335x-sancloud-bbe-extended-wifi.dtb \
-	am335x-shc.dtb \
-	am335x-sbc-t335.dtb \
-	am335x-sl50.dtb \
-	am335x-wega-rdk.dtb \
-	am335x-osd3358-sm-red.dtb
-dtb-$(CONFIG_ARCH_OMAP4) += \
-	omap4-droid-bionic-xt875.dtb \
-	omap4-droid4-xt894.dtb \
-	omap4-duovero-parlor.dtb \
-	omap4-kc1.dtb \
-	omap4-panda.dtb \
-	omap4-panda-a4.dtb \
-	omap4-panda-es.dtb \
-	omap4-sdp.dtb \
-	omap4-sdp-es23plus.dtb \
-	omap4-var-dvk-om44.dtb \
-	omap4-var-stk-om44.dtb
-dtb-$(CONFIG_SOC_AM43XX) += \
-	am43x-epos-evm.dtb \
-	am437x-cm-t43.dtb \
-	am437x-gp-evm.dtb \
-	am437x-idk-evm.dtb \
-	am437x-sbc-t43.dtb \
-	am437x-sk-evm.dtb
-dtb-$(CONFIG_SOC_OMAP5) += \
-	omap5-cm-t54.dtb \
-	omap5-igep0050.dtb \
-	omap5-sbc-t54.dtb \
-	omap5-uevm.dtb
-dtb-$(CONFIG_SOC_DRA7XX) += \
-	am57xx-beagle-x15.dtb \
-	am57xx-beagle-x15-revb1.dtb \
-	am57xx-beagle-x15-revc.dtb \
-	am5729-beagleboneai.dtb \
-	am57xx-cl-som-am57x.dtb \
-	am57xx-sbc-am57x.dtb \
-	am572x-idk.dtb \
-	am571x-idk.dtb \
-	am574x-idk.dtb \
-	dra7-evm.dtb \
-	dra72-evm.dtb \
-	dra72-evm-revc.dtb \
-	dra71-evm.dtb \
-	dra76-evm.dtb
-dtb-$(CONFIG_ARCH_ORION5X) += \
-	orion5x-kuroboxpro.dtb \
-	orion5x-lacie-d2-network.dtb \
-	orion5x-lacie-ethernet-disk-mini-v2.dtb \
-	orion5x-linkstation-lsgl.dtb \
-	orion5x-linkstation-lswtgl.dtb \
-	orion5x-linkstation-lschl.dtb \
-	orion5x-lswsgl.dtb \
-	orion5x-maxtor-shared-storage-2.dtb \
-	orion5x-netgear-wnr854t.dtb \
-	orion5x-rd88f5182-nas.dtb
-dtb-$(CONFIG_ARCH_ACTIONS) += \
-	owl-s500-cubieboard6.dtb \
-	owl-s500-guitar-bb-rev-b.dtb \
-	owl-s500-labrador-base-m.dtb \
-	owl-s500-roseapplepi.dtb \
-	owl-s500-sparky.dtb
-dtb-$(CONFIG_ARCH_PXA) += \
-	pxa300-raumfeld-connector.dtb \
-	pxa300-raumfeld-controller.dtb \
-	pxa300-raumfeld-speaker-l.dtb \
-	pxa300-raumfeld-speaker-m.dtb \
-	pxa300-raumfeld-speaker-one.dtb \
-	pxa300-raumfeld-speaker-s.dtb
-dtb-$(CONFIG_ARCH_OXNAS) += \
-	ox810se-wd-mbwe.dtb \
-	ox820-cloudengines-pogoplug-series-3.dtb
-dtb-$(CONFIG_ARCH_QCOM) += \
-	qcom-apq8016-sbc.dtb \
-	qcom-apq8026-asus-sparrow.dtb \
-	qcom-apq8026-lg-lenok.dtb \
-	qcom-apq8060-dragonboard.dtb \
-	qcom-apq8064-cm-qs600.dtb \
-	qcom-apq8064-ifc6410.dtb \
-	qcom-apq8064-sony-xperia-lagan-yuga.dtb \
-	qcom-apq8064-asus-nexus7-flo.dtb \
-	qcom-apq8074-dragonboard.dtb \
-	qcom-apq8084-ifc6540.dtb \
-	qcom-apq8084-mtp.dtb \
-	qcom-ipq4018-ap120c-ac.dtb \
-	qcom-ipq4018-ap120c-ac-bit.dtb \
-	qcom-ipq4018-jalapeno.dtb \
-	qcom-ipq4019-ap.dk01.1-c1.dtb \
-	qcom-ipq4019-ap.dk04.1-c1.dtb \
-	qcom-ipq4019-ap.dk04.1-c3.dtb \
-	qcom-ipq4019-ap.dk07.1-c1.dtb \
-	qcom-ipq4019-ap.dk07.1-c2.dtb \
-	qcom-ipq8064-ap148.dtb \
-	qcom-ipq8064-rb3011.dtb \
-	qcom-msm8226-samsung-s3ve3g.dtb \
-	qcom-msm8660-surf.dtb \
-	qcom-msm8916-samsung-serranove.dtb \
-	qcom-msm8960-cdp.dtb \
-	qcom-msm8974-lge-nexus5-hammerhead.dtb \
-	qcom-msm8974-sony-xperia-rhine-amami.dtb \
-	qcom-msm8974-sony-xperia-rhine-honami.dtb \
-	qcom-msm8974pro-fairphone-fp2.dtb \
-	qcom-msm8974pro-samsung-klte.dtb \
-	qcom-msm8974pro-sony-xperia-shinano-castor.dtb \
-	qcom-mdm9615-wp8548-mangoh-green.dtb \
-	qcom-sdx55-mtp.dtb \
-	qcom-sdx55-t55.dtb \
-	qcom-sdx55-telit-fn980-tlb.dtb \
-	qcom-sdx65-mtp.dtb
-dtb-$(CONFIG_ARCH_RDA) += \
-	rda8810pl-orangepi-2g-iot.dtb \
-	rda8810pl-orangepi-i96.dtb
-dtb-$(CONFIG_ARCH_REALTEK) += \
-	rtd1195-horseradish.dtb \
-	rtd1195-mele-x1000.dtb
-dtb-$(CONFIG_ARCH_REALVIEW) += \
-	arm-realview-pb1176.dtb \
-	arm-realview-pb11mp.dtb \
-	arm-realview-eb.dtb \
-	arm-realview-eb-bbrevd.dtb \
-	arm-realview-eb-11mp.dtb \
-	arm-realview-eb-11mp-bbrevd.dtb \
-	arm-realview-eb-11mp-ctrevb.dtb \
-	arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
-	arm-realview-eb-a9mp.dtb \
-	arm-realview-eb-a9mp-bbrevd.dtb \
-	arm-realview-pba8.dtb \
-	arm-realview-pbx-a9.dtb
-dtb-$(CONFIG_ARCH_RENESAS) += \
-	emev2-kzm9d.dtb \
-	r7s72100-genmai.dtb \
-	r7s72100-gr-peach.dtb \
-	r7s72100-rskrza1.dtb \
-	r7s9210-rza2mevb.dtb \
-	r8a73a4-ape6evm.dtb \
-	r8a7740-armadillo800eva.dtb \
-	r8a7742-iwg21d-q7.dtb \
-	r8a7742-iwg21d-q7-dbcm-ca.dtb \
-	r8a7743-iwg20d-q7.dtb \
-	r8a7743-iwg20d-q7-dbcm-ca.dtb \
-	r8a7743-sk-rzg1m.dtb \
-	r8a7744-iwg20d-q7.dtb \
-	r8a7744-iwg20d-q7-dbcm-ca.dtb \
-	r8a7745-iwg22d-sodimm.dtb \
-	r8a7745-iwg22d-sodimm-dbhd-ca.dtb \
-	r8a7745-sk-rzg1e.dtb \
-	r8a77470-iwg23s-sbc.dtb \
-	r8a7778-bockw.dtb \
-	r8a7779-marzen.dtb \
-	r8a7790-lager.dtb \
-	r8a7790-stout.dtb \
-	r8a7791-koelsch.dtb \
-	r8a7791-porter.dtb \
-	r8a7792-blanche.dtb \
-	r8a7792-wheat.dtb \
-	r8a7793-gose.dtb \
-	r8a7794-alt.dtb \
-	r8a7794-silk.dtb \
-	r9a06g032-rzn1d400-db.dtb \
-	sh73a0-kzm9g.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += \
-	rv1108-elgin-r1.dtb \
-	rv1108-evb.dtb \
-	rk3036-evb.dtb \
-	rk3036-kylin.dtb \
-	rk3066a-bqcurie2.dtb \
-	rk3066a-marsboard.dtb \
-	rk3066a-mk808.dtb \
-	rk3066a-rayeager.dtb \
-	rk3188-bqedison2qc.dtb \
-	rk3188-px3-evb.dtb \
-	rk3188-radxarock.dtb \
-	rk3228-evb.dtb \
-	rk3229-evb.dtb \
-	rk3229-xms6.dtb \
-	rk3288-evb-act8846.dtb \
-	rk3288-evb-rk808.dtb \
-	rk3288-firefly-beta.dtb \
-	rk3288-firefly.dtb \
-	rk3288-firefly-reload.dtb \
-	rk3288-miqi.dtb \
-	rk3288-phycore-rdk.dtb \
-	rk3288-popmetal.dtb \
-	rk3288-r89.dtb \
-	rk3288-rock2-square.dtb \
-	rk3288-rock-pi-n8.dtb \
-	rk3288-tinker.dtb \
-	rk3288-tinker-s.dtb \
-	rk3288-veyron-brain.dtb \
-	rk3288-veyron-fievel.dtb \
-	rk3288-veyron-jaq.dtb \
-	rk3288-veyron-jerry.dtb \
-	rk3288-veyron-mickey.dtb \
-	rk3288-veyron-mighty.dtb \
-	rk3288-veyron-minnie.dtb \
-	rk3288-veyron-pinky.dtb \
-	rk3288-veyron-speedy.dtb \
-	rk3288-veyron-tiger.dtb \
-	rk3288-vyasa.dtb
-dtb-$(CONFIG_ARCH_S3C24XX) += \
-	s3c2416-smdk2416.dtb
-dtb-$(CONFIG_ARCH_S3C64XX) += \
-	s3c6410-mini6410.dtb \
-	s3c6410-smdk6410.dtb
-dtb-$(CONFIG_ARCH_S5PV210) += \
-	s5pv210-aquila.dtb \
-	s5pv210-fascinate4g.dtb \
-	s5pv210-galaxys.dtb \
-	s5pv210-goni.dtb \
-	s5pv210-smdkc110.dtb \
-	s5pv210-smdkv210.dtb \
-	s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
-	socfpga_arria5_socdk.dtb \
-	socfpga_arria10_chameleonv3.dtb \
-	socfpga_arria10_socdk_nand.dtb \
-	socfpga_arria10_socdk_qspi.dtb \
-	socfpga_arria10_socdk_sdmmc.dtb \
-	socfpga_cyclone5_chameleon96.dtb \
-	socfpga_cyclone5_mcvevk.dtb \
-	socfpga_cyclone5_socdk.dtb \
-	socfpga_cyclone5_de0_nano_soc.dtb \
-	socfpga_cyclone5_sockit.dtb \
-	socfpga_cyclone5_socrates.dtb \
-	socfpga_cyclone5_sodia.dtb \
-	socfpga_cyclone5_vining_fpga.dtb \
-	socfpga_vt.dtb
-dtb-$(CONFIG_ARCH_SPEAR13XX) += \
-	spear1310-evb.dtb \
-	spear1340-evb.dtb
-dtb-$(CONFIG_ARCH_SPEAR3XX) += \
-	spear300-evb.dtb \
-	spear310-evb.dtb \
-	spear320-evb.dtb \
-	spear320-hmi.dtb
-dtb-$(CONFIG_ARCH_SPEAR6XX) += \
-	spear600-evb.dtb
-dtb-$(CONFIG_ARCH_STI) += \
-	stih407-b2120.dtb \
-	stih410-b2120.dtb \
-	stih410-b2260.dtb \
-	stih418-b2199.dtb \
-	stih418-b2264.dtb
-dtb-$(CONFIG_ARCH_STM32) += \
-	stm32f429-disco.dtb \
-	stm32f469-disco.dtb \
-	stm32f746-disco.dtb \
-	stm32f769-disco.dtb \
-	stm32429i-eval.dtb \
-	stm32746g-eval.dtb \
-	stm32h743i-eval.dtb \
-	stm32h743i-disco.dtb \
-	stm32h750i-art-pi.dtb \
-	stm32mp135f-dk.dtb \
-	stm32mp151a-prtt1a.dtb \
-	stm32mp151a-prtt1c.dtb \
-	stm32mp151a-prtt1s.dtb \
-	stm32mp153c-dhcom-drc02.dtb \
-	stm32mp153c-dhcor-drc-compact.dtb \
-	stm32mp157a-avenger96.dtb \
-	stm32mp157a-dhcor-avenger96.dtb \
-	stm32mp157a-dk1.dtb \
-	stm32mp157a-dk1-scmi.dtb \
-	stm32mp157a-iot-box.dtb \
-	stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
-	stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
-	stm32mp157a-icore-stm32mp1-ctouch2.dtb \
-	stm32mp157a-icore-stm32mp1-ctouch2-of10.dtb \
-	stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
-	stm32mp157a-stinger96.dtb \
-	stm32mp157c-dhcom-pdk2.dtb \
-	stm32mp157c-dhcom-picoitx.dtb \
-	stm32mp157c-dk2.dtb \
-	stm32mp157c-dk2-scmi.dtb \
-	stm32mp157c-ed1.dtb \
-	stm32mp157c-ed1-scmi.dtb \
-	stm32mp157c-emsbc-argon.dtb \
-	stm32mp157c-ev1.dtb \
-	stm32mp157c-ev1-scmi.dtb \
-	stm32mp157c-lxa-mc1.dtb \
-	stm32mp157c-odyssey.dtb
-dtb-$(CONFIG_MACH_SUN4I) += \
-	sun4i-a10-a1000.dtb \
-	sun4i-a10-ba10-tvbox.dtb \
-	sun4i-a10-chuwi-v7-cw0825.dtb \
-	sun4i-a10-cubieboard.dtb \
-	sun4i-a10-dserve-dsrv9703c.dtb \
-	sun4i-a10-gemei-g9.dtb \
-	sun4i-a10-hackberry.dtb \
-	sun4i-a10-hyundai-a7hd.dtb \
-	sun4i-a10-inet1.dtb \
-	sun4i-a10-inet97fv2.dtb \
-	sun4i-a10-inet9f-rev03.dtb \
-	sun4i-a10-itead-iteaduino-plus.dtb \
-	sun4i-a10-jesurun-q5.dtb \
-	sun4i-a10-marsboard.dtb \
-	sun4i-a10-mini-xplus.dtb \
-	sun4i-a10-mk802.dtb \
-	sun4i-a10-mk802ii.dtb \
-	sun4i-a10-olinuxino-lime.dtb \
-	sun4i-a10-pcduino.dtb \
-	sun4i-a10-pcduino2.dtb \
-	sun4i-a10-pov-protab2-ips9.dtb \
-	sun4i-a10-topwise-a721.dtb
-dtb-$(CONFIG_MACH_SUN5I) += \
-	sun5i-a10s-auxtek-t003.dtb \
-	sun5i-a10s-auxtek-t004.dtb \
-	sun5i-a10s-mk802.dtb \
-	sun5i-a10s-olinuxino-micro.dtb \
-	sun5i-a10s-r7-tv-dongle.dtb \
-	sun5i-a10s-wobo-i5.dtb \
-	sun5i-a13-difrnce-dit4350.dtb \
-	sun5i-a13-empire-electronix-d709.dtb \
-	sun5i-a13-empire-electronix-m712.dtb \
-	sun5i-a13-hsg-h702.dtb \
-	sun5i-a13-inet-98v-rev2.dtb \
-	sun5i-a13-licheepi-one.dtb \
-	sun5i-a13-olinuxino.dtb \
-	sun5i-a13-olinuxino-micro.dtb \
-	sun5i-a13-pocketbook-touch-lux-3.dtb \
-	sun5i-a13-q8-tablet.dtb \
-	sun5i-a13-utoo-p66.dtb \
-	sun5i-gr8-chip-pro.dtb \
-	sun5i-gr8-evb.dtb \
-	sun5i-r8-chip.dtb
-dtb-$(CONFIG_MACH_SUN6I) += \
-	sun6i-a31-app4-evb1.dtb \
-	sun6i-a31-colombus.dtb \
-	sun6i-a31-hummingbird.dtb \
-	sun6i-a31-i7.dtb \
-	sun6i-a31-m9.dtb \
-	sun6i-a31-mele-a1000g-quad.dtb \
-	sun6i-a31s-colorfly-e708-q1.dtb \
-	sun6i-a31s-cs908.dtb \
-	sun6i-a31s-inet-q972.dtb \
-	sun6i-a31s-primo81.dtb \
-	sun6i-a31s-sina31s.dtb \
-	sun6i-a31s-sinovoip-bpi-m2.dtb \
-	sun6i-a31s-yones-toptech-bs1078-v2.dtb
-dtb-$(CONFIG_MACH_SUN7I) += \
-	sun7i-a20-bananapi.dtb \
-	sun7i-a20-bananapi-m1-plus.dtb \
-	sun7i-a20-bananapro.dtb \
-	sun7i-a20-cubieboard2.dtb \
-	sun7i-a20-cubietruck.dtb \
-	sun7i-a20-haoyu-marsboard.dtb \
-	sun7i-a20-hummingbird.dtb \
-	sun7i-a20-itead-ibox.dtb \
-	sun7i-a20-i12-tvbox.dtb \
-	sun7i-a20-icnova-swac.dtb \
-	sun7i-a20-lamobo-r1.dtb \
-	sun7i-a20-linutronix-testbox-v2.dtb \
-	sun7i-a20-m3.dtb \
-	sun7i-a20-mk808c.dtb \
-	sun7i-a20-olimex-som-evb.dtb \
-	sun7i-a20-olimex-som-evb-emmc.dtb \
-	sun7i-a20-olimex-som204-evb.dtb \
-	sun7i-a20-olimex-som204-evb-emmc.dtb \
-	sun7i-a20-olinuxino-lime.dtb \
-	sun7i-a20-olinuxino-lime-emmc.dtb \
-	sun7i-a20-olinuxino-lime2.dtb \
-	sun7i-a20-olinuxino-lime2-emmc.dtb \
-	sun7i-a20-olinuxino-micro.dtb \
-	sun7i-a20-olinuxino-micro-emmc.dtb \
-	sun7i-a20-orangepi.dtb \
-	sun7i-a20-orangepi-mini.dtb \
-	sun7i-a20-pcduino3.dtb \
-	sun7i-a20-pcduino3-nano.dtb \
-	sun7i-a20-wexler-tab7200.dtb \
-	sun7i-a20-wits-pro-a20-dkt.dtb
-dtb-$(CONFIG_MACH_SUN8I) += \
-	sun8i-a23-evb.dtb \
-	sun8i-a23-gt90h-v4.dtb \
-	sun8i-a23-inet86dz.dtb \
-	sun8i-a23-ippo-q8h-v5.dtb \
-	sun8i-a23-ippo-q8h-v1.2.dtb \
-	sun8i-a23-polaroid-mid2407pxe03.dtb \
-	sun8i-a23-polaroid-mid2809pxe04.dtb \
-	sun8i-a23-q8-tablet.dtb \
-	sun8i-a33-et-q8-v1.6.dtb \
-	sun8i-a33-ga10h-v1.1.dtb \
-	sun8i-a33-inet-d978-rev2.dtb \
-	sun8i-a33-ippo-q8h-v1.2.dtb \
-	sun8i-a33-olinuxino.dtb \
-	sun8i-a33-q8-tablet.dtb \
-	sun8i-a33-sinlinx-sina33.dtb \
-	sun8i-a83t-allwinner-h8homlet-v2.dtb \
-	sun8i-a83t-bananapi-m3.dtb \
-	sun8i-a83t-cubietruck-plus.dtb \
-	sun8i-a83t-tbs-a711.dtb \
-	sun8i-h2-plus-bananapi-m2-zero.dtb \
-	sun8i-h2-plus-libretech-all-h3-cc.dtb \
-	sun8i-h2-plus-orangepi-r1.dtb \
-	sun8i-h2-plus-orangepi-zero.dtb \
-	sun8i-h3-bananapi-m2-plus.dtb \
-	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
-	sun8i-h3-beelink-x2.dtb \
-	sun8i-h3-libretech-all-h3-cc.dtb \
-	sun8i-h3-mapleboard-mp130.dtb \
-	sun8i-h3-nanopi-duo2.dtb \
-	sun8i-h3-nanopi-m1.dtb	\
-	sun8i-h3-nanopi-m1-plus.dtb \
-	sun8i-h3-nanopi-neo.dtb \
-	sun8i-h3-nanopi-neo-air.dtb \
-	sun8i-h3-nanopi-r1.dtb \
-	sun8i-h3-orangepi-2.dtb \
-	sun8i-h3-orangepi-lite.dtb \
-	sun8i-h3-orangepi-one.dtb \
-	sun8i-h3-orangepi-pc.dtb \
-	sun8i-h3-orangepi-pc-plus.dtb \
-	sun8i-h3-orangepi-plus.dtb \
-	sun8i-h3-orangepi-plus2e.dtb \
-	sun8i-h3-orangepi-zero-plus2.dtb \
-	sun8i-h3-rervision-dvk.dtb \
-	sun8i-h3-zeropi.dtb \
-	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
-	sun8i-r16-bananapi-m2m.dtb \
-	sun8i-r16-nintendo-nes-classic.dtb \
-	sun8i-r16-nintendo-super-nes-classic.dtb \
-	sun8i-r16-parrot.dtb \
-	sun8i-r40-bananapi-m2-ultra.dtb \
-	sun8i-r40-oka40i-c.dtb \
-	sun8i-s3-elimo-initium.dtb \
-	sun8i-s3-lichee-zero-plus.dtb \
-	sun8i-s3-pinecube.dtb \
-	sun8i-t3-cqa3t-bv3.dtb \
-	sun8i-v3-sl631-imx179.dtb \
-	sun8i-v3s-licheepi-zero.dtb \
-	sun8i-v3s-licheepi-zero-dock.dtb \
-	sun8i-v40-bananapi-m2-berry.dtb
-dtb-$(CONFIG_MACH_SUN9I) += \
-	sun9i-a80-optimus.dtb \
-	sun9i-a80-cubieboard4.dtb
-dtb-$(CONFIG_MACH_SUNIV) += \
-	suniv-f1c100s-licheepi-nano.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
-	tegra20-acer-a500-picasso.dtb \
-	tegra20-asus-tf101.dtb \
-	tegra20-harmony.dtb \
-	tegra20-colibri-eval-v3.dtb \
-	tegra20-colibri-iris.dtb \
-	tegra20-medcom-wide.dtb \
-	tegra20-paz00.dtb \
-	tegra20-plutux.dtb \
-	tegra20-seaboard.dtb \
-	tegra20-tec.dtb \
-	tegra20-trimslice.dtb \
-	tegra20-ventana.dtb
-dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
-	tegra30-apalis-eval.dtb \
-	tegra30-apalis-v1.1-eval.dtb \
-	tegra30-asus-nexus7-grouper-PM269.dtb \
-	tegra30-asus-nexus7-grouper-E1565.dtb \
-	tegra30-asus-nexus7-tilapia-E1565.dtb \
-	tegra30-asus-tf201.dtb \
-	tegra30-asus-tf300t.dtb \
-	tegra30-asus-tf300tg.dtb \
-	tegra30-asus-tf700t.dtb \
-	tegra30-beaver.dtb \
-	tegra30-cardhu-a02.dtb \
-	tegra30-cardhu-a04.dtb \
-	tegra30-colibri-eval-v3.dtb \
-	tegra30-ouya.dtb \
-	tegra30-pegatron-chagall.dtb
-dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
-	tegra114-asus-tf701t.dtb \
-	tegra114-dalmore.dtb \
-	tegra114-roth.dtb \
-	tegra114-tn7.dtb
-dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
-	tegra124-apalis-eval.dtb \
-	tegra124-apalis-v1.2-eval.dtb \
-	tegra124-jetson-tk1.dtb \
-	tegra124-nyan-big.dtb \
-	tegra124-nyan-big-fhd.dtb \
-	tegra124-nyan-blaze.dtb \
-	tegra124-venice2.dtb
-dtb-$(CONFIG_ARCH_U8500) += \
-	ste-snowball.dtb \
-	ste-hrefprev60-stuib.dtb \
-	ste-hrefprev60-tvk.dtb \
-	ste-hrefv60plus-stuib.dtb \
-	ste-hrefv60plus-tvk.dtb \
-	ste-href520-tvk.dtb \
-	ste-ux500-samsung-golden.dtb \
-	ste-ux500-samsung-janice.dtb \
-	ste-ux500-samsung-gavini.dtb \
-	ste-ux500-samsung-codina.dtb \
-	ste-ux500-samsung-codina-tmo.dtb \
-	ste-ux500-samsung-skomer.dtb \
-	ste-ux500-samsung-kyle.dtb
-dtb-$(CONFIG_ARCH_UNIPHIER) += \
-	uniphier-ld4-ref.dtb \
-	uniphier-ld6b-ref.dtb \
-	uniphier-pro4-ace.dtb \
-	uniphier-pro4-ref.dtb \
-	uniphier-pro4-sanji.dtb \
-	uniphier-pxs2-gentil.dtb \
-	uniphier-pxs2-vodka.dtb \
-	uniphier-sld8-ref.dtb
-dtb-$(CONFIG_ARCH_VERSATILE) += \
-	versatile-ab.dtb \
-	versatile-ab-ib2.dtb \
-	versatile-pb.dtb
-dtb-$(CONFIG_ARCH_VEXPRESS) += \
-	vexpress-v2p-ca5s.dtb \
-	vexpress-v2p-ca9.dtb \
-	vexpress-v2p-ca15-tc1.dtb \
-	vexpress-v2p-ca15_a7.dtb
-dtb-$(CONFIG_ARCH_VIRT) += \
-	xenvm-4.2.dtb
-dtb-$(CONFIG_ARCH_VT8500) += \
-	vt8500-bv07.dtb \
-	wm8505-ref.dtb \
-	wm8650-mid.dtb \
-	wm8750-apc8750.dtb \
-	wm8850-w70v2.dtb
-dtb-$(CONFIG_ARCH_ZYNQ) += \
-	zynq-cc108.dtb \
-	zynq-ebaz4205.dtb \
-	zynq-microzed.dtb \
-	zynq-parallella.dtb \
-	zynq-zc702.dtb \
-	zynq-zc706.dtb \
-	zynq-zc770-xm010.dtb \
-	zynq-zc770-xm011.dtb \
-	zynq-zc770-xm012.dtb \
-	zynq-zc770-xm013.dtb \
-	zynq-zed.dtb \
-	zynq-zturn.dtb \
-	zynq-zturn-v5.dtb \
-	zynq-zybo.dtb \
-	zynq-zybo-z7.dtb
-dtb-$(CONFIG_MACH_ARMADA_370) += \
-	armada-370-c200-v2.dtb \
-	armada-370-db.dtb \
-	armada-370-dlink-dns327l.dtb \
-	armada-370-mirabox.dtb \
-	armada-370-netgear-rn102.dtb \
-	armada-370-netgear-rn104.dtb \
-	armada-370-rd.dtb \
-	armada-370-seagate-nas-2bay.dtb \
-	armada-370-seagate-nas-4bay.dtb \
-	armada-370-seagate-personal-cloud.dtb \
-	armada-370-seagate-personal-cloud-2bay.dtb \
-	armada-370-synology-ds213j.dtb
-dtb-$(CONFIG_MACH_ARMADA_375) += \
-	armada-375-db.dtb
-dtb-$(CONFIG_MACH_ARMADA_38X) += \
-	armada-381-netgear-gs110emx.dtb \
-	armada-382-rd-ac3x-48g4x2xl.dtb \
-	armada-385-atl-x530.dtb\
-	armada-385-clearfog-gtr-s4.dtb \
-	armada-385-clearfog-gtr-l8.dtb \
-	armada-385-db-88f6820-amc.dtb \
-	armada-385-db-ap.dtb \
-	armada-385-linksys-caiman.dtb \
-	armada-385-linksys-cobra.dtb \
-	armada-385-linksys-rango.dtb \
-	armada-385-linksys-shelby.dtb \
-	armada-385-synology-ds116.dtb \
-	armada-385-turris-omnia.dtb \
-	armada-388-clearfog.dtb \
-	armada-388-clearfog-base.dtb \
-	armada-388-clearfog-pro.dtb \
-	armada-388-db.dtb \
-	armada-388-gp.dtb \
-	armada-388-helios4.dtb \
-	armada-388-rd.dtb
-dtb-$(CONFIG_MACH_ARMADA_39X) += \
-	armada-398-db.dtb
-dtb-$(CONFIG_MACH_ARMADA_XP) += \
-	armada-xp-axpwifiap.dtb \
-	armada-xp-crs305-1g-4s.dtb \
-	armada-xp-crs305-1g-4s-bit.dtb \
-	armada-xp-crs326-24g-2s.dtb \
-	armada-xp-crs326-24g-2s-bit.dtb \
-	armada-xp-crs328-4c-20s-4s.dtb \
-	armada-xp-crs328-4c-20s-4s-bit.dtb \
-	armada-xp-db.dtb \
-	armada-xp-db-dxbc2.dtb \
-	armada-xp-db-xc3-24g4xg.dtb \
-	armada-xp-gp.dtb \
-	armada-xp-lenovo-ix4-300d.dtb \
-	armada-xp-linksys-mamba.dtb \
-	armada-xp-matrix.dtb \
-	armada-xp-netgear-rn2120.dtb \
-	armada-xp-openblocks-ax3-4.dtb \
-	armada-xp-synology-ds414.dtb
-dtb-$(CONFIG_MACH_DOVE) += \
-	dove-cubox.dtb \
-	dove-cubox-es.dtb \
-	dove-d2plug.dtb \
-	dove-d3plug.dtb \
-	dove-dove-db.dtb \
-	dove-sbc-a510.dtb
-dtb-$(CONFIG_ARCH_MEDIATEK) += \
-	mt2701-evb.dtb \
-	mt6580-evbp1.dtb \
-	mt6589-aquaris5.dtb \
-	mt6589-fairphone-fp1.dtb \
-	mt6592-evb.dtb \
-	mt7623a-rfb-emmc.dtb \
-	mt7623a-rfb-nand.dtb \
-	mt7623n-rfb-emmc.dtb \
-	mt7623n-bananapi-bpi-r2.dtb \
-	mt7629-rfb.dtb \
-	mt8127-moose.dtb \
-	mt8135-evbp1.dtb
-dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
-dtb-$(CONFIG_ARCH_MSTARV7) += \
-	mstar-infinity-msc313-breadbee_crust.dtb \
-	mstar-infinity2m-ssd202d-100ask-dongshanpione.dtb \
-	mstar-infinity2m-ssd202d-miyoo-mini.dtb \
-	mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dtb \
-	mstar-infinity2m-ssd202d-ssd201htv2.dtb \
-	mstar-infinity2m-ssd202d-unitv2.dtb \
-	mstar-infinity3-msc313e-breadbee.dtb \
-	mstar-mercury5-ssc8336n-midrived08.dtb
-dtb-$(CONFIG_ARCH_ASPEED) += \
-	aspeed-ast2500-evb.dtb \
-	aspeed-ast2600-evb-a1.dtb \
-	aspeed-ast2600-evb.dtb \
-	aspeed-bmc-amd-ethanolx.dtb \
-	aspeed-bmc-ampere-mtjade.dtb \
-	aspeed-bmc-arm-stardragon4800-rep2.dtb \
-	aspeed-bmc-asrock-e3c246d4i.dtb \
-	aspeed-bmc-asrock-romed8hm3.dtb \
-	aspeed-bmc-bytedance-g220a.dtb \
-	aspeed-bmc-facebook-bletchley.dtb \
-	aspeed-bmc-facebook-cloudripper.dtb \
-	aspeed-bmc-facebook-cmm.dtb \
-	aspeed-bmc-facebook-elbert.dtb \
-	aspeed-bmc-facebook-fuji.dtb \
-	aspeed-bmc-facebook-galaxy100.dtb \
-	aspeed-bmc-facebook-minipack.dtb \
-	aspeed-bmc-facebook-tiogapass.dtb \
-	aspeed-bmc-facebook-wedge40.dtb \
-	aspeed-bmc-facebook-wedge100.dtb \
-	aspeed-bmc-facebook-wedge400.dtb \
-	aspeed-bmc-facebook-yamp.dtb \
-	aspeed-bmc-facebook-yosemitev2.dtb \
-	aspeed-bmc-ibm-everest.dtb \
-	aspeed-bmc-ibm-rainier.dtb \
-	aspeed-bmc-ibm-rainier-1s4u.dtb \
-	aspeed-bmc-ibm-rainier-4u.dtb \
-	aspeed-bmc-intel-s2600wf.dtb \
-	aspeed-bmc-inspur-fp5280g2.dtb \
-	aspeed-bmc-inspur-nf5280m6.dtb \
-	aspeed-bmc-lenovo-hr630.dtb \
-	aspeed-bmc-lenovo-hr855xg2.dtb \
-	aspeed-bmc-microsoft-olympus.dtb \
-	aspeed-bmc-opp-lanyang.dtb \
-	aspeed-bmc-opp-mihawk.dtb \
-	aspeed-bmc-opp-mowgli.dtb \
-	aspeed-bmc-opp-nicole.dtb \
-	aspeed-bmc-opp-palmetto.dtb \
-	aspeed-bmc-opp-romulus.dtb \
-	aspeed-bmc-opp-swift.dtb \
-	aspeed-bmc-opp-tacoma.dtb \
-	aspeed-bmc-opp-vesnin.dtb \
-	aspeed-bmc-opp-witherspoon.dtb \
-	aspeed-bmc-opp-zaius.dtb \
-	aspeed-bmc-portwell-neptune.dtb \
-	aspeed-bmc-qcom-dc-scm-v1.dtb \
-	aspeed-bmc-quanta-q71l.dtb \
-	aspeed-bmc-quanta-s6q.dtb \
-	aspeed-bmc-supermicro-x11spi.dtb \
-	aspeed-bmc-inventec-transformers.dtb \
-	aspeed-bmc-tyan-s7106.dtb \
-	aspeed-bmc-tyan-s8036.dtb \
-	aspeed-bmc-vegman-n110.dtb \
-	aspeed-bmc-vegman-rx20.dtb \
-	aspeed-bmc-vegman-sx20.dtb
+subdir-y += actions
+subdir-y += airoha
+subdir-y += allwinner
+subdir-y += alphascale
+subdir-y += amazon
+subdir-y += amlogic
+subdir-y += arm
+subdir-y += aspeed
+subdir-y += axis
+subdir-y += broadcom
+subdir-y += calxeda
+subdir-y += cirrus
+subdir-y += cnxt
+subdir-y += gemini
+subdir-y += hisilicon
+subdir-y += hpe
+subdir-y += intel
+subdir-y += marvell
+subdir-y += mediatek
+subdir-y += microchip
+subdir-y += moxa
+subdir-y += nspire
+subdir-y += nuvoton
+subdir-y += nvidia
+subdir-y += nxp
+subdir-y += qcom
+subdir-y += realtek
+subdir-y += renesas
+subdir-y += rockchip
+subdir-y += samsung
+subdir-y += sigmastar
+subdir-y += socionext
+subdir-y += st
+subdir-y += sunplus
+subdir-y += synaptics
+subdir-y += ti
+subdir-y += unisoc
+subdir-y += vt8500
+subdir-y += xen
+subdir-y += xilinx
diff --git a/arch/arm/boot/dts/actions/Makefile b/arch/arm/boot/dts/actions/Makefile
new file mode 100644
index 000000000000..f384e4a48e6f
--- /dev/null
+++ b/arch/arm/boot/dts/actions/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ACTIONS) += \
+	owl-s500-cubieboard6.dtb \
+	owl-s500-guitar-bb-rev-b.dtb \
+	owl-s500-labrador-base-m.dtb \
+	owl-s500-roseapplepi.dtb \
+	owl-s500-sparky.dtb
diff --git a/arch/arm/boot/dts/owl-s500-cubieboard6.dts b/arch/arm/boot/dts/actions/owl-s500-cubieboard6.dts
index c2b02895910c..c2b02895910c 100644
--- a/arch/arm/boot/dts/owl-s500-cubieboard6.dts
+++ b/arch/arm/boot/dts/actions/owl-s500-cubieboard6.dts
diff --git a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/actions/owl-s500-guitar-bb-rev-b.dts
index 7ae34a23e320..7ae34a23e320 100644
--- a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
+++ b/arch/arm/boot/dts/actions/owl-s500-guitar-bb-rev-b.dts
diff --git a/arch/arm/boot/dts/owl-s500-guitar.dtsi b/arch/arm/boot/dts/actions/owl-s500-guitar.dtsi
index 81cc39871f17..81cc39871f17 100644
--- a/arch/arm/boot/dts/owl-s500-guitar.dtsi
+++ b/arch/arm/boot/dts/actions/owl-s500-guitar.dtsi
diff --git a/arch/arm/boot/dts/owl-s500-labrador-base-m.dts b/arch/arm/boot/dts/actions/owl-s500-labrador-base-m.dts
index 1585e33f703b..1585e33f703b 100644
--- a/arch/arm/boot/dts/owl-s500-labrador-base-m.dts
+++ b/arch/arm/boot/dts/actions/owl-s500-labrador-base-m.dts
diff --git a/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi b/arch/arm/boot/dts/actions/owl-s500-labrador-v2.dtsi
index 883ff2f9886d..883ff2f9886d 100644
--- a/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
+++ b/arch/arm/boot/dts/actions/owl-s500-labrador-v2.dtsi
diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/actions/owl-s500-roseapplepi.dts
index eb555f385283..eb555f385283 100644
--- a/arch/arm/boot/dts/owl-s500-roseapplepi.dts
+++ b/arch/arm/boot/dts/actions/owl-s500-roseapplepi.dts
diff --git a/arch/arm/boot/dts/owl-s500-sparky.dts b/arch/arm/boot/dts/actions/owl-s500-sparky.dts
index 9d8f7336bec0..9d8f7336bec0 100644
--- a/arch/arm/boot/dts/owl-s500-sparky.dts
+++ b/arch/arm/boot/dts/actions/owl-s500-sparky.dts
diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/actions/owl-s500.dtsi
index 739b4b9cec8c..739b4b9cec8c 100644
--- a/arch/arm/boot/dts/owl-s500.dtsi
+++ b/arch/arm/boot/dts/actions/owl-s500.dtsi
diff --git a/arch/arm/boot/dts/airoha/Makefile b/arch/arm/boot/dts/airoha/Makefile
new file mode 100644
index 000000000000..00c31389f622
--- /dev/null
+++ b/arch/arm/boot/dts/airoha/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_AIROHA) += \
+	en7523-evb.dtb
diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/airoha/en7523-evb.dts
index f23a25cce119..f23a25cce119 100644
--- a/arch/arm/boot/dts/en7523-evb.dts
+++ b/arch/arm/boot/dts/airoha/en7523-evb.dts
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/airoha/en7523.dtsi
index 7f839331a777..b523a868c4ad 100644
--- a/arch/arm/boot/dts/en7523.dtsi
+++ b/arch/arm/boot/dts/airoha/en7523.dtsi
@@ -81,6 +81,8 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile
new file mode 100644
index 000000000000..f71392a55df8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/Makefile
@@ -0,0 +1,283 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_SUN4I) += \
+	sun4i-a10-a1000.dtb \
+	sun4i-a10-ba10-tvbox.dtb \
+	sun4i-a10-chuwi-v7-cw0825.dtb \
+	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-dserve-dsrv9703c.dtb \
+	sun4i-a10-gemei-g9.dtb \
+	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet1.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-inet9f-rev03.dtb \
+	sun4i-a10-itead-iteaduino-plus.dtb \
+	sun4i-a10-jesurun-q5.dtb \
+	sun4i-a10-marsboard.dtb \
+	sun4i-a10-mini-xplus.dtb \
+	sun4i-a10-mk802.dtb \
+	sun4i-a10-mk802ii.dtb \
+	sun4i-a10-olinuxino-lime.dtb \
+	sun4i-a10-pcduino.dtb \
+	sun4i-a10-pcduino2.dtb \
+	sun4i-a10-pov-protab2-ips9.dtb \
+	sun4i-a10-topwise-a721.dtb
+dtb-$(CONFIG_MACH_SUN4I) += \
+	sun4i-a10-a1000.dtb \
+	sun4i-a10-ba10-tvbox.dtb \
+	sun4i-a10-chuwi-v7-cw0825.dtb \
+	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-dserve-dsrv9703c.dtb \
+	sun4i-a10-gemei-g9.dtb \
+	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet1.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-inet9f-rev03.dtb \
+	sun4i-a10-itead-iteaduino-plus.dtb \
+	sun4i-a10-jesurun-q5.dtb \
+	sun4i-a10-marsboard.dtb \
+	sun4i-a10-mini-xplus.dtb \
+	sun4i-a10-mk802.dtb \
+	sun4i-a10-mk802ii.dtb \
+	sun4i-a10-olinuxino-lime.dtb \
+	sun4i-a10-pcduino.dtb \
+	sun4i-a10-pcduino2.dtb \
+	sun4i-a10-pov-protab2-ips9.dtb \
+	sun4i-a10-topwise-a721.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t003.dtb \
+	sun5i-a10s-auxtek-t004.dtb \
+	sun5i-a10s-mk802.dtb \
+	sun5i-a10s-olinuxino-micro.dtb \
+	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a10s-wobo-i5.dtb \
+	sun5i-a13-difrnce-dit4350.dtb \
+	sun5i-a13-empire-electronix-d709.dtb \
+	sun5i-a13-empire-electronix-m712.dtb \
+	sun5i-a13-hsg-h702.dtb \
+	sun5i-a13-inet-98v-rev2.dtb \
+	sun5i-a13-licheepi-one.dtb \
+	sun5i-a13-olinuxino.dtb \
+	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-pocketbook-touch-lux-3.dtb \
+	sun5i-a13-pocketbook-614-plus.dtb \
+	sun5i-a13-q8-tablet.dtb \
+	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-chip-pro.dtb \
+	sun5i-gr8-evb.dtb \
+	sun5i-r8-chip.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t003.dtb \
+	sun5i-a10s-auxtek-t004.dtb \
+	sun5i-a10s-mk802.dtb \
+	sun5i-a10s-olinuxino-micro.dtb \
+	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a10s-wobo-i5.dtb \
+	sun5i-a13-difrnce-dit4350.dtb \
+	sun5i-a13-empire-electronix-d709.dtb \
+	sun5i-a13-empire-electronix-m712.dtb \
+	sun5i-a13-hsg-h702.dtb \
+	sun5i-a13-inet-98v-rev2.dtb \
+	sun5i-a13-licheepi-one.dtb \
+	sun5i-a13-olinuxino.dtb \
+	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-pocketbook-touch-lux-3.dtb \
+	sun5i-a13-q8-tablet.dtb \
+	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-chip-pro.dtb \
+	sun5i-gr8-evb.dtb \
+	sun5i-r8-chip.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-app4-evb1.dtb \
+	sun6i-a31-colombus.dtb \
+	sun6i-a31-hummingbird.dtb \
+	sun6i-a31-i7.dtb \
+	sun6i-a31-m9.dtb \
+	sun6i-a31-mele-a1000g-quad.dtb \
+	sun6i-a31s-colorfly-e708-q1.dtb \
+	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-inet-q972.dtb \
+	sun6i-a31s-primo81.dtb \
+	sun6i-a31s-sina31s.dtb \
+	sun6i-a31s-sinovoip-bpi-m2.dtb \
+	sun6i-a31s-yones-toptech-bs1078-v2.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-app4-evb1.dtb \
+	sun6i-a31-colombus.dtb \
+	sun6i-a31-hummingbird.dtb \
+	sun6i-a31-i7.dtb \
+	sun6i-a31-m9.dtb \
+	sun6i-a31-mele-a1000g-quad.dtb \
+	sun6i-a31s-colorfly-e708-q1.dtb \
+	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-inet-q972.dtb \
+	sun6i-a31s-primo81.dtb \
+	sun6i-a31s-sina31s.dtb \
+	sun6i-a31s-sinovoip-bpi-m2.dtb \
+	sun6i-a31s-yones-toptech-bs1078-v2.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
+	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapi-m1-plus.dtb \
+	sun7i-a20-bananapro.dtb \
+	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-haoyu-marsboard.dtb \
+	sun7i-a20-hummingbird.dtb \
+	sun7i-a20-itead-ibox.dtb \
+	sun7i-a20-i12-tvbox.dtb \
+	sun7i-a20-icnova-a20-adb4006.dtb \
+	sun7i-a20-icnova-swac.dtb \
+	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-linutronix-testbox-v2.dtb \
+	sun7i-a20-m3.dtb \
+	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som-evb-emmc.dtb \
+	sun7i-a20-olimex-som204-evb.dtb \
+	sun7i-a20-olimex-som204-evb-emmc.dtb \
+	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime-emmc.dtb \
+	sun7i-a20-olinuxino-lime2.dtb \
+	sun7i-a20-olinuxino-lime2-emmc.dtb \
+	sun7i-a20-olinuxino-micro.dtb \
+	sun7i-a20-olinuxino-micro-emmc.dtb \
+	sun7i-a20-orangepi.dtb \
+	sun7i-a20-orangepi-mini.dtb \
+	sun7i-a20-pcduino3.dtb \
+	sun7i-a20-pcduino3-nano.dtb \
+	sun7i-a20-wexler-tab7200.dtb \
+	sun7i-a20-wits-pro-a20-dkt.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
+	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapi-m1-plus.dtb \
+	sun7i-a20-bananapro.dtb \
+	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-haoyu-marsboard.dtb \
+	sun7i-a20-hummingbird.dtb \
+	sun7i-a20-itead-ibox.dtb \
+	sun7i-a20-i12-tvbox.dtb \
+	sun7i-a20-icnova-a20-adb4006.dtb \
+	sun7i-a20-icnova-swac.dtb \
+	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-linutronix-testbox-v2.dtb \
+	sun7i-a20-m3.dtb \
+	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som-evb-emmc.dtb \
+	sun7i-a20-olimex-som204-evb.dtb \
+	sun7i-a20-olimex-som204-evb-emmc.dtb \
+	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime-emmc.dtb \
+	sun7i-a20-olinuxino-lime2.dtb \
+	sun7i-a20-olinuxino-lime2-emmc.dtb \
+	sun7i-a20-olinuxino-micro.dtb \
+	sun7i-a20-olinuxino-micro-emmc.dtb \
+	sun7i-a20-orangepi.dtb \
+	sun7i-a20-orangepi-mini.dtb \
+	sun7i-a20-pcduino3.dtb \
+	sun7i-a20-pcduino3-nano.dtb \
+	sun7i-a20-wexler-tab7200.dtb \
+	sun7i-a20-wits-pro-a20-dkt.dtb
+
+# Enables support for device-tree overlays for all pis
+DTC_FLAGS_sun8i-h2-plus-orangepi-zero := -@
+DTC_FLAGS_sun8i-h3-orangepi-lite := -@
+DTC_FLAGS_sun8i-h3-bananapi-m2-plus := -@
+DTC_FLAGS_sun8i-h3-nanopi-m1-plus := -@
+DTC_FLAGS_sun8i-h3-nanopi-m1 := -@
+DTC_FLAGS_sun8i-h3-nanopi-duo2 := -@
+DTC_FLAGS_sun8i-h3-orangepi-plus2e := -@
+DTC_FLAGS_sun8i-h3-orangepi-one := -@
+DTC_FLAGS_sun8i-h3-orangepi-plus := -@
+DTC_FLAGS_sun8i-h3-orangepi-2 := -@
+DTC_FLAGS_sun8i-h3-orangepi-zero-plus2 := -@
+DTC_FLAGS_sun8i-h3-nanopi-neo-air := -@
+DTC_FLAGS_sun8i-h3-zeropi := -@
+DTC_FLAGS_sun8i-h3-nanopi-neo := -@
+DTC_FLAGS_sun8i-h3-nanopi-r1 := -@
+DTC_FLAGS_sun8i-h3-orangepi-pc := -@
+DTC_FLAGS_sun8i-h3-bananapi-m2-plus-v1.2 := -@
+DTC_FLAGS_sun8i-h3-orangepi-pc-plus := -@
+DTC_FLAGS_sun8i-t113s-netcube-nagami-basic-carrier := -@
+DTC_FLAGS_sun8i-v3s-netcube-kumquat := -@
+dtb-$(CONFIG_MACH_SUN8I) += \
+	sun8i-a23-evb.dtb \
+	sun8i-a23-gt90h-v4.dtb \
+	sun8i-a23-inet86dz.dtb \
+	sun8i-a23-ippo-q8h-v5.dtb \
+	sun8i-a23-ippo-q8h-v1.2.dtb \
+	sun8i-a23-polaroid-mid2407pxe03.dtb \
+	sun8i-a23-polaroid-mid2809pxe04.dtb \
+	sun8i-a23-q8-tablet.dtb \
+	sun8i-a33-et-q8-v1.6.dtb \
+	sun8i-a33-ga10h-v1.1.dtb \
+	sun8i-a33-inet-d978-rev2.dtb \
+	sun8i-a33-ippo-q8h-v1.2.dtb \
+	sun8i-a33-olinuxino.dtb \
+	sun8i-a33-q8-tablet.dtb \
+	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-a33-vstar.dtb \
+	sun8i-a83t-allwinner-h8homlet-v2.dtb \
+	sun8i-a83t-bananapi-m3.dtb \
+	sun8i-a83t-cubietruck-plus.dtb \
+	sun8i-a83t-tbs-a711.dtb \
+	sun8i-h2-plus-bananapi-m2-zero.dtb \
+	sun8i-h2-plus-libretech-all-h3-cc.dtb \
+	sun8i-h2-plus-orangepi-r1.dtb \
+	sun8i-h2-plus-orangepi-zero.dtb \
+	sun8i-h2-plus-orangepi-zero-interface-board.dtb \
+	sun8i-h3-bananapi-m2-plus.dtb \
+	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
+	sun8i-h3-beelink-x2.dtb \
+	sun8i-h3-libretech-all-h3-cc.dtb \
+	sun8i-h3-mapleboard-mp130.dtb \
+	sun8i-h3-nanopi-duo2.dtb \
+	sun8i-h3-nanopi-m1.dtb \
+	sun8i-h3-nanopi-m1-plus.dtb \
+	sun8i-h3-nanopi-neo.dtb \
+	sun8i-h3-nanopi-neo-air.dtb \
+	sun8i-h3-nanopi-r1.dtb \
+	sun8i-h3-orangepi-2.dtb \
+	sun8i-h3-orangepi-lite.dtb \
+	sun8i-h3-orangepi-one.dtb \
+	sun8i-h3-orangepi-pc.dtb \
+	sun8i-h3-orangepi-pc-plus.dtb \
+	sun8i-h3-orangepi-plus.dtb \
+	sun8i-h3-orangepi-plus2e.dtb \
+	sun8i-h3-orangepi-zero-plus2.dtb \
+	sun8i-h3-orangepi-zero-plus2-interface-board.dtb \
+	sun8i-h3-rervision-dvk.dtb \
+	sun8i-h3-zeropi.dtb \
+	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
+	sun8i-r16-bananapi-m2m.dtb \
+	sun8i-r16-nintendo-nes-classic.dtb \
+	sun8i-r16-nintendo-super-nes-classic.dtb \
+	sun8i-r16-parrot.dtb \
+	sun8i-r40-bananapi-m2-ultra.dtb \
+	sun8i-r40-oka40i-c.dtb \
+	sun8i-s3-elimo-initium.dtb \
+	sun8i-s3-lichee-zero-plus.dtb \
+	sun8i-s3-pinecube.dtb \
+	sun8i-t113s-mangopi-mq-r-t113.dtb \
+	sun8i-t113s-netcube-nagami-basic-carrier.dtb \
+	sun8i-t113s-netcube-nagami-keypad-carrier.dtb \
+	sun8i-t3-cqa3t-bv3.dtb \
+	sun8i-v3-sl631-imx179.dtb \
+	sun8i-v3s-anbernic-rg-nano.dtb \
+	sun8i-v3s-licheepi-zero.dtb \
+	sun8i-v3s-licheepi-zero-dock.dtb \
+	sun8i-v3s-netcube-kumquat.dtb \
+	sun8i-v40-bananapi-m2-berry.dtb
+sun8i-h2-plus-orangepi-zero-interface-board-dtbs += \
+	sun8i-h2-plus-orangepi-zero.dtb sun8i-orangepi-zero-interface-board.dtbo
+sun8i-h3-orangepi-zero-plus2-interface-board-dtbs += \
+	sun8i-h3-orangepi-zero-plus2.dtb sun8i-orangepi-zero-interface-board.dtbo
+dtb-$(CONFIG_MACH_SUN9I) += \
+	sun9i-a80-optimus.dtb \
+	sun9i-a80-cubieboard4.dtb
+dtb-$(CONFIG_MACH_SUNIV) += \
+	suniv-f1c100s-licheepi-nano.dtb \
+	suniv-f1c200s-lctech-pi.dtb \
+	suniv-f1c200s-popstick-v1.1.dtb
diff --git a/arch/arm/boot/dts/axp152.dtsi b/arch/arm/boot/dts/allwinner/axp152.dtsi
index f90ad6c64a07..f90ad6c64a07 100644
--- a/arch/arm/boot/dts/axp152.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp152.dtsi
diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/allwinner/axp209.dtsi
index ca240cd6f6c3..469d0f7d5185 100644
--- a/arch/arm/boot/dts/axp209.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp209.dtsi
@@ -48,6 +48,13 @@
  * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
  */
 
+/ {
+	pmic-temp {
+		compatible = "iio-hwmon";
+		io-channels = <&axp_adc 4>; /* Internal temperature */
+	};
+};
+
 &axp209 {
 	compatible = "x-powers,axp209";
 	interrupt-controller;
diff --git a/arch/arm/boot/dts/axp223.dtsi b/arch/arm/boot/dts/allwinner/axp223.dtsi
index b91b6c1278c7..b91b6c1278c7 100644
--- a/arch/arm/boot/dts/axp223.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp223.dtsi
diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/allwinner/axp22x.dtsi
index a020c12b2884..f79650afd0a7 100644
--- a/arch/arm/boot/dts/axp22x.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp22x.dtsi
@@ -67,6 +67,12 @@
 		status = "disabled";
 	};
 
+	axp_gpio: gpio {
+		compatible = "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	regulators {
 		/* Default work frequency for buck regulators */
 		x-powers,dcdc-freq = <3000>;
diff --git a/arch/arm/boot/dts/axp809.dtsi b/arch/arm/boot/dts/allwinner/axp809.dtsi
index ab8e5f2d9246..d134d4c00bd8 100644
--- a/arch/arm/boot/dts/axp809.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp809.dtsi
@@ -50,4 +50,11 @@
 	compatible = "x-powers,axp809";
 	interrupt-controller;
 	#interrupt-cells = <1>;
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp809-gpio",
+			     "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/allwinner/axp81x.dtsi
index b93387b0c1c3..ebaf1c3ce8db 100644
--- a/arch/arm/boot/dts/axp81x.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp81x.dtsi
@@ -62,16 +62,6 @@
 		compatible = "x-powers,axp813-gpio";
 		gpio-controller;
 		#gpio-cells = <2>;
-
-		gpio0_ldo: gpio0-ldo-pin {
-			pins = "GPIO0";
-			function = "ldo";
-		};
-
-		gpio1_ldo: gpio1-ldo-pin {
-			pins = "GPIO1";
-			function = "ldo";
-		};
 	};
 
 	battery_power_supply: battery-power {
@@ -144,15 +134,11 @@
 		};
 
 		reg_ldo_io0: ldo-io0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio0_ldo>;
 			/* Disable by default to avoid conflicts with GPIO */
 			status = "disabled";
 		};
 
 		reg_ldo_io1: ldo-io1 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio1_ldo>;
 			/* Disable by default to avoid conflicts with GPIO */
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-a1000.dts
index 20f9ed244851..20f9ed244851 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-a1000.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-ba10-tvbox.dts
index 816d534ac093..816d534ac093 100644
--- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-ba10-tvbox.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-chuwi-v7-cw0825.dts
index 74262988881c..74262988881c 100644
--- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-chuwi-v7-cw0825.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-cubieboard.dts
index 0645d6064235..0645d6064235 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-cubieboard.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts
index 63e77c05bfda..63e77c05bfda 100644
--- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-gemei-g9.dts
index ea7a59dcf8f9..ea7a59dcf8f9 100644
--- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-gemei-g9.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-hackberry.dts
index 47dea0922501..47dea0922501 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-hackberry.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-hyundai-a7hd.dts
index bf2044bac42f..bf2044bac42f 100644
--- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-hyundai-a7hd.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet1.dts
index 60e432a0ef1c..60e432a0ef1c 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet1.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet1.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet97fv2.dts
index 76016f2ca29d..76016f2ca29d 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet97fv2.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet9f-rev03.dts
index 62e7aa587f89..62e7aa587f89 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet9f-rev03.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-itead-iteaduino-plus.dts
index d4e319d16aae..d4e319d16aae 100644
--- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-itead-iteaduino-plus.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-jesurun-q5.dts
index 1aeb0bd5519e..1aeb0bd5519e 100644
--- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-jesurun-q5.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-marsboard.dts
index 81fdb217d339..81fdb217d339 100644
--- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-marsboard.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-mini-xplus.dts
index f9d74e21031d..f9d74e21031d 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-mini-xplus.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802.dts
index 059fe9c5d024..059fe9c5d024 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802ii.dts
index 17dcdf031118..17dcdf031118 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802ii.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
index 83d283cf6633..d425d9ee83db 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
@@ -218,7 +218,7 @@
 &usbphy {
 	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */
-	usb0_vbus-supply   = <&reg_usb0_vbus>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino.dts
index a332d61fd561..a332d61fd561 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino2.dts
index bc4f128965ed..bc4f128965ed 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino2.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts
index c32596947647..c32596947647 100644
--- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-topwise-a721.dts
index 3628f12d2521..3628f12d2521 100644
--- a/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-topwise-a721.dts
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi
index 51a6464aab9a..51a6464aab9a 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t003.dts
index 04b0e6d28769..04b0e6d28769 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t003.dts
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t004.dts
index 667bc2dc1ea9..667bc2dc1ea9 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t004.dts
diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-mk802.dts
index d0219404c231..d0219404c231 100644
--- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-mk802.dts
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-olinuxino-micro.dts
index 5832bb31fc51..5832bb31fc51 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-olinuxino-micro.dts
diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-r7-tv-dongle.dts
index 964360f0610a..964360f0610a 100644
--- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-r7-tv-dongle.dts
diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-wobo-i5.dts
index ef8baa992687..ef8baa992687 100644
--- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-wobo-i5.dts
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/allwinner/sun5i-a10s.dtsi
index 09c486b608b2..09c486b608b2 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s.dtsi
diff --git a/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-difrnce-dit4350.dts
index 894c4c4f9a1f..894c4c4f9a1f 100644
--- a/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-difrnce-dit4350.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-d709.dts
index d059388d7252..d059388d7252 100644
--- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-d709.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-m712.dts
index b1e2afd9de52..b1e2afd9de52 100644
--- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-m712.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-hsg-h702.dts
index 9b9f2a574851..9b9f2a574851 100644
--- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-hsg-h702.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-inet-98v-rev2.dts
index 439ae3b537df..439ae3b537df 100644
--- a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-inet-98v-rev2.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-licheepi-one.dts
index 3a6c4bd0a44f..3a6c4bd0a44f 100644
--- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-licheepi-one.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino-micro.dts
index bfe1075e62cc..bfe1075e62cc 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino-micro.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino.dts
index fadeae3cd8bb..fadeae3cd8bb 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino.dts
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts
new file mode 100644
index 000000000000..ab8d138dc11d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 Denis Burkov <hitechshell@mail.ru>
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "PocketBook 614 Plus";
+	compatible = "pocketbook,614-plus", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			linux,default-trigger = "default-on";
+			gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "Right";
+			linux,code = <KEY_NEXT>;
+			gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; /* PG9 */
+		};
+
+		key-1 {
+			label = "Left";
+			linux,code = <KEY_PREVIOUS>;
+			gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
+		};
+	};
+
+	reg_3v3_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-mmc0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
+		vin-supply = <&reg_vcc3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-300 {
+		label = "Down";
+		linux,code = <KEY_DOWN>;
+		channel = <0>;
+		voltage = <300000>;
+	};
+
+	button-700 {
+		label = "Up";
+		linux,code = <KEY_UP>;
+		channel = <0>;
+		voltage = <700000>;
+	};
+
+	button-1000 {
+		label = "Left";
+		linux,code = <KEY_LEFT>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+
+	button-1500 {
+		label = "Right";
+		linux,code = <KEY_RIGHT>;
+		channel = <0>;
+		voltage = <1500000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_3v3_mmc0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts
index d60407772e5d..d60407772e5d 100644
--- a/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-q8-tablet.dts
index f9fc1c8b60b8..f9fc1c8b60b8 100644
--- a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-q8-tablet.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts
index be486d28d04f..be486d28d04f 100644
--- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/allwinner/sun5i-a13.dtsi
index 3325ab07094a..2c9152b151be 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13.dtsi
@@ -62,14 +62,14 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <100000>;
 					hysteresis = <2000>;
diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts
index a32cde3e32eb..ffbd99c176db 100644
--- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts
@@ -70,14 +70,14 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "chip-pro:white:status";
 			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	mmc0_pwrseq: mmc0_pwrseq {
+	mmc0_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
 	};
diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/allwinner/sun5i-gr8-evb.dts
index f4fe258ef06d..f4fe258ef06d 100644
--- a/arch/arm/boot/dts/sun5i-gr8-evb.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-gr8-evb.dts
diff --git a/arch/arm/boot/dts/sun5i-gr8.dtsi b/arch/arm/boot/dts/allwinner/sun5i-gr8.dtsi
index 98a8fd5e89e8..98a8fd5e89e8 100644
--- a/arch/arm/boot/dts/sun5i-gr8.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-gr8.dtsi
diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts
index 4bf4943d4eb7..8c784a2c086e 100644
--- a/arch/arm/boot/dts/sun5i-r8-chip.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts
@@ -70,14 +70,14 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "chip:white:status";
 			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	mmc0_pwrseq: mmc0_pwrseq {
+	mmc0_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
 	};
@@ -255,6 +255,12 @@
 	pinctrl-0 = <&uart3_pg_pins>,
 		    <&uart3_cts_rts_pg_pins>;
 	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&axp_gpio 3 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	};
 };
 
 &usb_otg {
diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/allwinner/sun5i-r8.dtsi
index de35dbcd1191..de35dbcd1191 100644
--- a/arch/arm/boot/dts/sun5i-r8.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-r8.dtsi
diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sun5i-reference-design-tablet.dtsi
index 6847f66699ac..6847f66699ac 100644
--- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-reference-design-tablet.dtsi
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/allwinner/sun5i.dtsi
index 250d6b87ab4d..d7c7b454a11a 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i.dtsi
@@ -286,7 +286,7 @@
 			clock-names = "ahb",
 				      "tcon-ch0",
 				      "tcon-ch1";
-			clock-output-names = "tcon-pixel-clock";
+			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
 			status = "disabled";
 
@@ -517,6 +517,15 @@
 				bias-pull-up;
 			};
 
+			/omit-if-no-ref/
+			mmc2_4bit_pe_pins: mmc2-4bit-pe-pins {
+				pins = "PE4", "PE5", "PE6", "PE7",
+				       "PE8", "PE9";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
 			mmc2_8bit_pins: mmc2-8bit-pins {
 				pins = "PC6", "PC7", "PC8", "PC9",
 				       "PC10", "PC11", "PC12", "PC13",
diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-app4-evb1.dts
index 32d22025ac99..32d22025ac99 100644
--- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-app4-evb1.dts
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-colombus.dts
index 93a15eaaa8cb..93a15eaaa8cb 100644
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-colombus.dts
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
index 236ebfc06192..5bce7a32651e 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
@@ -109,7 +109,7 @@
 		};
 	};
 
-	reg_vga_3v3: vga_3v3_regulator {
+	reg_vga_3v3: vga-3v3-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vga-3v3";
 		regulator-min-microvolt = <3300000>;
@@ -119,7 +119,7 @@
 		gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
 	};
diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-i7.dts
index 744723d956f0..744723d956f0 100644
--- a/arch/arm/boot/dts/sun6i-a31-i7.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-i7.dts
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-m9.dts
index 7d2eaaf5c33e..7d2eaaf5c33e 100644
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-m9.dts
diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-mele-a1000g-quad.dts
index 83611434270c..83611434270c 100644
--- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-mele-a1000g-quad.dts
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31.dtsi
index 6cdadba6a3ac..f0145d6b9c53 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31.dtsi
@@ -179,14 +179,14 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <70000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <100000>;
 					hysteresis = <2000>;
@@ -822,7 +822,7 @@
 			clocks = <&ccu CLK_APB2_UART0>;
 			resets = <&ccu RST_APB2_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -835,7 +835,7 @@
 			clocks = <&ccu CLK_APB2_UART1>;
 			resets = <&ccu RST_APB2_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -848,7 +848,7 @@
 			clocks = <&ccu CLK_APB2_UART2>;
 			resets = <&ccu RST_APB2_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -861,7 +861,7 @@
 			clocks = <&ccu CLK_APB2_UART3>;
 			resets = <&ccu RST_APB2_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -874,7 +874,7 @@
 			clocks = <&ccu CLK_APB2_UART4>;
 			resets = <&ccu RST_APB2_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -887,7 +887,7 @@
 			clocks = <&ccu CLK_APB2_UART5>;
 			resets = <&ccu RST_APB2_UART5>;
 			dmas = <&dma 22>, <&dma 22>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -1318,7 +1318,7 @@
 			compatible = "allwinner,sun6i-a31-prcm";
 			reg = <0x01f01400 0x200>;
 
-			ar100: ar100_clk {
+			ar100: ar100-clk {
 				compatible = "allwinner,sun6i-a31-ar100-clk";
 				#clock-cells = <0>;
 				clocks = <&rtc CLK_OSC32K>, <&osc24M>,
@@ -1327,7 +1327,7 @@
 				clock-output-names = "ar100";
 			};
 
-			ahb0: ahb0_clk {
+			ahb0: ahb0-clk {
 				compatible = "fixed-factor-clock";
 				#clock-cells = <0>;
 				clock-div = <1>;
@@ -1336,14 +1336,14 @@
 				clock-output-names = "ahb0";
 			};
 
-			apb0: apb0_clk {
+			apb0: apb0-clk {
 				compatible = "allwinner,sun6i-a31-apb0-clk";
 				#clock-cells = <0>;
 				clocks = <&ahb0>;
 				clock-output-names = "apb0";
 			};
 
-			apb0_gates: apb0_gates_clk {
+			apb0_gates: apb0-gates-clk {
 				compatible = "allwinner,sun6i-a31-apb0-gates-clk";
 				#clock-cells = <1>;
 				clocks = <&apb0>;
@@ -1353,14 +1353,14 @@
 						"apb0_i2c";
 			};
 
-			ir_clk: ir_clk {
+			ir_clk: ir-clk {
 				#clock-cells = <0>;
 				compatible = "allwinner,sun4i-a10-mod0-clk";
 				clocks = <&rtc CLK_OSC32K>, <&osc24M>;
 				clock-output-names = "ir";
 			};
 
-			apb0_rst: apb0_rst {
+			apb0_rst: apb0-rst {
 				compatible = "allwinner,sun6i-a31-clock-reset";
 				#reset-cells = <1>;
 			};
diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-colorfly-e708-q1.dts
index a2ef7846e2c8..a2ef7846e2c8 100644
--- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-colorfly-e708-q1.dts
diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-cs908.dts
index 1d15e15011c6..1d15e15011c6 100644
--- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-cs908.dts
diff --git a/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-inet-q972.dts
index c5e2c55cdc63..c5e2c55cdc63 100644
--- a/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-inet-q972.dts
diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts
index b32b70ada7fd..b32b70ada7fd 100644
--- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s-core.dtsi
index 227ad489731c..227ad489731c 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s-core.dtsi
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s.dts
index 0af48e143b66..56956352914d 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s.dts
@@ -67,7 +67,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "sina31s:status:usr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
 		};
diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts
index 96554ab4f6d3..f63d67ec9887 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -75,7 +75,7 @@
 		};
 	};
 
-	mmc2_pwrseq: mmc2_pwrseq {
+	mmc2_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
 	};
diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-yones-toptech-bs1078-v2.dts
index 0b61f5368d44..0b61f5368d44 100644
--- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-yones-toptech-bs1078-v2.dts
diff --git a/arch/arm/boot/dts/sun6i-a31s.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31s.dtsi
index 97e2c51d0aea..97e2c51d0aea 100644
--- a/arch/arm/boot/dts/sun6i-a31s.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s.dtsi
diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sun6i-reference-design-tablet.dtsi
index f38d19c6be8c..f38d19c6be8c 100644
--- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun6i-reference-design-tablet.dtsi
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts
index caa935ca4f19..f2d7fab9978d 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts
@@ -86,7 +86,7 @@
 		};
 	};
 
-	mmc3_pwrseq: mmc3_pwrseq {
+	mmc3_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
 	};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
index 46ecf9db2324..d8b362c9661a 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
@@ -48,6 +48,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "LeMaker Banana Pi";
@@ -169,6 +170,32 @@
 &gmac_mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapro.dts
index e22f0e8bb17a..e22f0e8bb17a 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapro.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-cubieboard2.dts
index e35e6990c4b2..e35e6990c4b2 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-cubieboard2.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts
index 52160e368304..be9b31d0f4b5 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts
@@ -96,7 +96,7 @@
 		};
 	};
 
-	mmc3_pwrseq: mmc3_pwrseq {
+	mmc3_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
 		clocks = <&ccu CLK_OUT_A>;
diff --git a/arch/arm/boot/dts/sun7i-a20-haoyu-marsboard.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-haoyu-marsboard.dts
index 097e479c2772..097e479c2772 100644
--- a/arch/arm/boot/dts/sun7i-a20-haoyu-marsboard.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-haoyu-marsboard.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts
index 3def2a330598..f1e26b75cd90 100644
--- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts
@@ -65,7 +65,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	reg_mmc3_vdd: mmc3_vdd {
+	reg_mmc3_vdd: regulator-mmc3-vdd {
 		compatible = "regulator-fixed";
 		regulator-name = "mmc3_vdd";
 		regulator-min-microvolt = <3000000>;
@@ -74,7 +74,7 @@
 		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
 	};
 
-	reg_gmac_vdd: gmac_vdd {
+	reg_gmac_vdd: regulator-gmac-vdd {
 		compatible = "regulator-fixed";
 		regulator-name = "gmac_vdd";
 		regulator-min-microvolt = <3000000>;
diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-i12-tvbox.dts
index b21ddd0ec1c2..b21ddd0ec1c2 100644
--- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-i12-tvbox.dts
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20-adb4006.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20-adb4006.dts
new file mode 100644
index 000000000000..577ead1d02a0
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20-adb4006.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2023 In-Circuit GmbH
+
+/dts-v1/;
+
+#include "sun7i-a20-icnova-a20.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "In-Circuit ICnova A20 ADB4006";
+	compatible = "incircuit,icnova-a20-adb4006", "incircuit,icnova-a20",
+		     "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
+			default-state = "on";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20.dtsi b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20.dtsi
new file mode 100644
index 000000000000..46616c6bc899
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2023 In-Circuit GmbH
+
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-swac.dts
index 413505f45a81..413505f45a81 100644
--- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-swac.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-ibox.dts
index 8ff83016ff5a..8ff83016ff5a 100644
--- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-ibox.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-lamobo-r1.dts
index 97518afe4658..97518afe4658 100644
--- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-lamobo-r1.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-linutronix-testbox-v2.dts
index da5a2eea4ce3..da5a2eea4ce3 100644
--- a/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-linutronix-testbox-v2.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-m3.dts
index f161d5238860..f161d5238860 100644
--- a/arch/arm/boot/dts/sun7i-a20-m3.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-m3.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-mk808c.dts
index 1491c603f661..1491c603f661 100644
--- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-mk808c.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts
index 20bf09b2226c..fb835730bbc4 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts
@@ -14,7 +14,7 @@
 	model = "Olimex A20-Olimex-SOM-EVB-eMMC";
 	compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20";
 
-	mmc2_pwrseq: mmc2_pwrseq {
+	mmc2_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>;
 	};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb.dts
index f05ee32bc9cb..f05ee32bc9cb 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts
index a59755a2e7a9..e8977c2fe798 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts
@@ -13,7 +13,7 @@
 	model = "Olimex A20-SOM204-EVB-eMMC";
 	compatible = "olimex,a20-olimex-som204-evb-emmc", "allwinner,sun7i-a20";
 
-	mmc2_pwrseq: mmc2_pwrseq {
+	mmc2_pwrseq: pwrseq-1 {
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
 	};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts
index 54af6c18075b..a55406657449 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts
@@ -65,7 +65,7 @@
 		};
 	};
 
-	rtl_pwrseq: rtl_pwrseq {
+	rtl_pwrseq: pwrseq-0 {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>;
 	};
@@ -177,7 +177,7 @@
 	non-removable;
 	status = "okay";
 
-	rtl8723bs: sdio_wifi@1 {
+	rtl8723bs: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime-emmc.dts
index 033cab3443f8..033cab3443f8 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime-emmc.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime.dts
index 92938d022295..92938d022295 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2-emmc.dts
index decb014a382b..decb014a382b 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2-emmc.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts
index ecb91fb899ff..435a189332e8 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts
@@ -82,7 +82,7 @@
 		};
 	};
 
-	reg_axp_ipsout: axp_ipsout {
+	reg_axp_ipsout: regulator-axp-ipsout {
 		compatible = "regulator-fixed";
 		regulator-name = "axp-ipsout";
 		regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro-emmc.dts
index 2337b44a88aa..2337b44a88aa 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro-emmc.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts
index a1b89b2a2999..a1b89b2a2999 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi-mini.dts
index 84efa01e7cba..84efa01e7cba 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi-mini.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi.dts
index 5d77f1d9818f..5d77f1d9818f 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3-nano.dts
index e40ecb48d726..e40ecb48d726 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3-nano.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3.dts
index 928b86a95f34..928b86a95f34 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-wexler-tab7200.dts
index fef02fcbbdf8..fef02fcbbdf8 100644
--- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-wexler-tab7200.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts
index 3bfae98f3cc3..29199b6a3b4a 100644
--- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts
@@ -60,7 +60,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	mmc3_pwrseq: mmc3_pwrseq {
+	mmc3_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
 	};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi
index 5574299685ab..5f44f09c5545 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi
@@ -153,14 +153,14 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <100000>;
 					hysteresis = <2000>;
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi
index f630ab55bb6a..2af8382ccdf5 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi
@@ -108,7 +108,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		osc24M: osc24M_clk {
+		osc24M: osc24M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -116,7 +116,7 @@
 			clock-output-names = "osc24M";
 		};
 
-		ext_osc32k: ext_osc32k_clk {
+		ext_osc32k: ext-osc32k-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
@@ -190,7 +190,7 @@
 			clock-names = "ahb",
 				      "tcon-ch0",
 				      "lvds-alt";
-			clock-output-names = "tcon-pixel-clock";
+			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
 			resets = <&ccu RST_BUS_LCD>,
 				 <&ccu RST_BUS_LVDS>;
@@ -490,7 +490,7 @@
 			clocks = <&ccu CLK_BUS_UART0>;
 			resets = <&ccu RST_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -503,7 +503,7 @@
 			clocks = <&ccu CLK_BUS_UART1>;
 			resets = <&ccu RST_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -516,7 +516,7 @@
 			clocks = <&ccu CLK_BUS_UART2>;
 			resets = <&ccu RST_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -529,7 +529,7 @@
 			clocks = <&ccu CLK_BUS_UART3>;
 			resets = <&ccu RST_BUS_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -542,7 +542,7 @@
 			clocks = <&ccu CLK_BUS_UART4>;
 			resets = <&ccu RST_BUS_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -733,7 +733,7 @@
 			compatible = "allwinner,sun8i-a23-prcm";
 			reg = <0x01f01400 0x200>;
 
-			ar100: ar100_clk {
+			ar100: ar100-clk {
 				compatible = "fixed-factor-clock";
 				#clock-cells = <0>;
 				clock-div = <1>;
@@ -742,7 +742,7 @@
 				clock-output-names = "ar100";
 			};
 
-			ahb0: ahb0_clk {
+			ahb0: ahb0-clk {
 				compatible = "fixed-factor-clock";
 				#clock-cells = <0>;
 				clock-div = <1>;
@@ -751,14 +751,14 @@
 				clock-output-names = "ahb0";
 			};
 
-			apb0: apb0_clk {
+			apb0: apb0-clk {
 				compatible = "allwinner,sun8i-a23-apb0-clk";
 				#clock-cells = <0>;
 				clocks = <&ahb0>;
 				clock-output-names = "apb0";
 			};
 
-			apb0_gates: apb0_gates_clk {
+			apb0_gates: apb0-gates-clk {
 				compatible = "allwinner,sun8i-a23-apb0-gates-clk";
 				#clock-cells = <1>;
 				clocks = <&apb0>;
@@ -767,7 +767,7 @@
 						"apb0_i2c";
 			};
 
-			apb0_rst: apb0_rst {
+			apb0_rst: apb0-rst {
 				compatible = "allwinner,sun6i-a31-clock-reset";
 				#reset-cells = <1>;
 			};
diff --git a/arch/arm/boot/dts/sun8i-a23-evb.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-evb.dts
index 53fb1be0401a..53fb1be0401a 100644
--- a/arch/arm/boot/dts/sun8i-a23-evb.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-evb.dts
diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-gt90h-v4.dts
index bcbc9b0758f9..bcbc9b0758f9 100644
--- a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-gt90h-v4.dts
diff --git a/arch/arm/boot/dts/sun8i-a23-inet86dz.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-inet86dz.dts
index d4405752a414..d4405752a414 100644
--- a/arch/arm/boot/dts/sun8i-a23-inet86dz.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-inet86dz.dts
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v1.2.dts
index c2f22fc33811..c2f22fc33811 120000
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v1.2.dts
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v5.dts
index c2f22fc33811..c2f22fc33811 120000
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v5.dts
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts
index d5f6aebd7216..0c585a6d990d 100644
--- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -52,7 +52,7 @@
 		ethernet0 = &esp8089;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
 		/* The esp8089 needs 200 ms after driving wifi-en high */
@@ -76,7 +76,7 @@
 	non-removable;
 	status = "okay";
 
-	esp8089: sdio_wifi@1 {
+	esp8089: wifi@1 {
 		compatible = "esp,esp8089";
 		reg = <1>;
 		esp,crystal-26M-en = <2>;
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts
index 9f9232a2fefb..63cb4e194a03 100644
--- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts
@@ -52,7 +52,7 @@
 		ethernet0 = &esp8089;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
 		/* The esp8089 needs 200 ms after driving wifi-en high */
@@ -69,7 +69,7 @@
 	non-removable;
 	status = "okay";
 
-	esp8089: sdio_wifi@1 {
+	esp8089: wifi@1 {
 		compatible = "esp,esp8089";
 		reg = <1>;
 		esp,crystal-26M-en = <2>;
diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-q8-tablet.dts
index 51097c77a152..51097c77a152 100644
--- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-q8-tablet.dts
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a23.dtsi
index a5e884a8b2ae..a5e884a8b2ae 100644
--- a/arch/arm/boot/dts/sun8i-a23.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23.dtsi
diff --git a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-et-q8-v1.6.dts
index 4519fd791a8f..4519fd791a8f 120000
--- a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-et-q8-v1.6.dts
diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts
index 2dfdd0a3151e..f00ce03ffc84 100644
--- a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts
@@ -85,7 +85,7 @@
 	non-removable;
 	status = "okay";
 
-	rtl8703as: sdio_wifi@1 {
+	rtl8703as: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts
index 065cb620aa99..162ba93f7484 100644
--- a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts
@@ -78,7 +78,7 @@
 	non-removable;
 	status = "okay";
 
-	rtl8723bs: sdio_wifi@1 {
+	rtl8723bs: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-ippo-q8h-v1.2.dts
index 4519fd791a8f..4519fd791a8f 120000
--- a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-ippo-q8h-v1.2.dts
diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-olinuxino.dts
index 6fee8f133508..6fee8f133508 100644
--- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-olinuxino.dts
diff --git a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-q8-tablet.dts
index 9c5750c25613..9c5750c25613 100644
--- a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-q8-tablet.dts
diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-sinlinx-sina33.dts
index 0c82ff3c7cb4..0c82ff3c7cb4 100644
--- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-sinlinx-sina33.dts
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi
new file mode 100644
index 000000000000..ba794b842ec4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+#include "sun8i-a33.dtsi"
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts
new file mode 100644
index 000000000000..9f5c29b3df46
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "sun8i-a33-vstar-core1.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Rervision A33-Vstar";
+	compatible = "rervision,a33-vstar",
+		     "rervision,a33-core1",
+		     "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &r8152;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub@1 {
+		/* Onboard GL850G hub which needs no extra power sequence */
+		compatible = "usb5e3,608";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		r8152: ethernet@4 {
+			/*
+			 * Onboard Realtek RTL8152 USB Ethernet,
+			 * with no MAC address programmed
+			 */
+			compatible = "usbbda,8152";
+			reg = <4>;
+		};
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-191 {
+		label = "V+";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191011>;
+	};
+
+	button-391 {
+		label = "V-";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <391304>;
+	};
+
+	button-600 {
+		label = "BACK";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+		interrupt-names = "host-wake";
+	};
+};
+
+/*
+ * Our WiFi chip needs both DLDO1 and DLDO2 to be powered at the same
+ * time, with the two being in sync. Since this is not really
+ * supported right now, just use the two as always on, and we will fix
+ * it later.
+ */
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi0";
+};
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&sound {
+	/* TODO: on-board microphone */
+
+	simple-audio-card,widgets = "Headphone", "Headphone Jack";
+	simple-audio-card,routing =
+		"Left DAC", "DACL",
+		"Right DAC", "DACR",
+		"Headphone Jack", "HP";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+		host-wakeup-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		shutdown-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi
index b3d1bdfb5118..36b2d78cdab9 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi
@@ -278,6 +278,7 @@
 		dphy: d-phy@1ca1000 {
 			compatible = "allwinner,sun6i-a31-mipi-dphy";
 			reg = <0x01ca1000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_MIPI_DSI>,
 				 <&ccu CLK_DSI_DPHY>;
 			clock-names = "bus", "mod";
@@ -322,35 +323,35 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				gpu_alert0: gpu_alert0 {
+				gpu_alert0: gpu-alert0 {
 					/* milliCelsius */
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_alert1: cpu_alert1 {
+				cpu_alert1: cpu-alert1 {
 					/* milliCelsius */
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};
 
-				gpu_alert1: gpu_alert1 {
+				gpu_alert1: gpu-alert1 {
 					/* milliCelsius */
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <110000>;
 					hysteresis = <2000>;
diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-allwinner-h8homlet-v2.dts
index c31c97d16024..c31c97d16024 100644
--- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-allwinner-h8homlet-v2.dts
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts
index 5a7e1bd5f825..32e811fa23e2 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts
@@ -95,7 +95,7 @@
 		gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&ac100_rtc 1>;
 		clock-names = "ext_clock";
@@ -105,6 +105,21 @@
 		/* enables internal regulator and de-asserts reset */
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
 	};
+
+	/*
+	 * Power supply for the SATA disk, behind a USB-SATA bridge.
+	 * Since it is a USB device, there is no consumer in the DT, so we
+	 * have to keep this always on.
+	 */
+	regulator-sata-disk-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "sata-disk-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
+	};
 };
 
 &cpu0 {
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts
index 870993393fc2..d5e6ddaffbce 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts
@@ -144,7 +144,7 @@
 		compatible = "linux,spdif-dit";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&ac100_rtc 1>;
 		clock-names = "ext_clock";
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
index a7d4ca308990..43982b106a4d 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
@@ -123,7 +123,7 @@
 		vin-supply = <&reg_vbat>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
 
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
index 82fdb04122ca..6f88d8764e6a 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
@@ -164,7 +164,7 @@
 		ranges;
 
 		/* TODO: PRCM block has a mux for this. */
-		osc24M: osc24M_clk {
+		osc24M: osc24M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -177,14 +177,14 @@
 		 * It is an internal RC-based oscillator.
 		 * TODO: Its controls are in the PRCM block.
 		 */
-		osc16M: osc16M_clk {
+		osc16M: osc16M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <16000000>;
 			clock-output-names = "osc16M";
 		};
 
-		osc16Md512: osc16Md512_clk {
+		osc16Md512: osc16Md512-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <512>;
@@ -456,7 +456,7 @@
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
 			clock-names = "ahb", "tcon-ch0";
-			clock-output-names = "tcon-pixel-clock";
+			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
 			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
 			reset-names = "lcd", "lvds";
@@ -1127,7 +1127,7 @@
 			#reset-cells = <1>;
 		};
 
-		r_cpucfg@1f01c00 {
+		cpucfg@1f01c00 {
 			compatible = "allwinner,sun8i-a83t-r-cpucfg";
 			reg = <0x1f01c00 0x400>;
 		};
@@ -1225,7 +1225,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu0_hot>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -1255,7 +1255,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu1_hot>;
 					cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
index d729b7c705db..d3a7c9fa23e4 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -103,7 +103,7 @@
 		cpu-supply = <&reg_vcc1v2>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-libretech-all-h3-cc.dts
index 4db0d4bb65eb..4db0d4bb65eb 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-libretech-all-h3-cc.dts
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts
index 3356f4210d45..79b03b31c5eb 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts
@@ -43,11 +43,12 @@
 /* Orange Pi R1 is based on Orange Pi Zero design */
 #include "sun8i-h2-plus-orangepi-zero.dts"
 
+/delete-node/ &reg_vcc_wifi;
+
 / {
 	model = "Xunlong Orange Pi R1";
 	compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
 
-	/delete-node/ reg_vcc_wifi;
 
 	/*
 	 * Ths pin of this regulator is the same with the Wi-Fi extra
@@ -89,7 +90,7 @@
 	vmmc-supply = <&reg_vcc3v3>;
 	vqmmc-supply = <&reg_vcc3v3>;
 
-	rtl8189etv: sdio_wifi@1 {
+	rtl8189etv: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
index 3706216ffb40..b23cec5b89eb 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
@@ -80,7 +80,7 @@
 		};
 	};
 
-	reg_vcc_wifi: reg_vcc_wifi {
+	reg_vcc_wifi: reg-vcc-wifi {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -105,13 +105,27 @@
 		states = <1100000 0>, <1300000 1>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
 		post-power-on-delay-ms = <200>;
 	};
 };
 
+/*
+ * Audio input/output is exposed on the 13-pin header and can't be used for
+ * anything else. However, adapter boards may use different audio routing.
+ * - https://linux-sunxi.org/Xunlong_Orange_Pi_Zero#Expansion_Port
+ * - Allwinner H3 Datasheet, section 3.1. Pin Characteristics
+ */
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "disabled";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_vdd_cpux>;
 };
@@ -149,7 +163,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	xr819: sdio_wifi@1 {
+	xr819: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus-v1.2.dts
index fc4a8c3d084d..fc4a8c3d084d 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus-v1.2.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus.dts
index 195a75da13f1..195a75da13f1 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts
index 27a0d51289dd..5b77300307de 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts
@@ -57,7 +57,7 @@
 		ethernet1 = &sdiowifi;
 	};
 
-	cec-gpio {
+	cec {
 		compatible = "cec-gpio";
 		cec-gpios = <&pio 0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PA14 */
 		hdmi-phandle = <&hdmi>;
@@ -122,7 +122,7 @@
 		compatible = "linux,spdif-dit";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
@@ -185,7 +185,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	sdiowifi: sdio_wifi@1 {
+	sdiowifi: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3-devboard.dts
index 02fbe00cde97..02fbe00cde97 100644
--- a/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3-devboard.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3.dtsi
index eedd5da5dc2f..35e71f46c197 100644
--- a/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3.dtsi
@@ -8,4 +8,4 @@
 /dts-v1/;
 
 #include "sun8i-h3.dtsi"
-#include <arm/sunxi-h3-h5-emlid-neutis.dtsi>
+#include "sunxi-h3-h5-emlid-neutis.dtsi"
diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-libretech-all-h3-cc.dts
index a8b2f0f1c11d..a8b2f0f1c11d 100644
--- a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-libretech-all-h3-cc.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-mapleboard-mp130.dts
index f5c8ccc5b872..f5c8ccc5b872 100644
--- a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-mapleboard-mp130.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
index 43641cb82398..2b0566d4b386 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
@@ -57,7 +57,7 @@
 		regulator-ramp-delay = <50>; /* 4ms */
 
 		enable-active-high;
-		enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
 		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
 		gpios-states = <0x1>;
 		states = <1100000 0>, <1300000 1>;
@@ -87,7 +87,7 @@
 		vin-supply = <&reg_vcc5v0>;
         };
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
@@ -119,7 +119,7 @@
 	non-removable;
 	status = "okay";
 
-	sdio_wifi: sdio_wifi@1 {
+	sdio_wifi: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&pio>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts
index 4ba533b0340f..59bd0746acf8 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts
@@ -62,7 +62,7 @@
 		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 	};
@@ -132,7 +132,7 @@
 	non-removable;
 	status = "okay";
 
-	sdio_wifi: sdio_wifi@1 {
+	sdio_wifi: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&pio>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1.dts
index 69243dcb30a6..69243dcb30a6 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
index 9e1a33f94cad..9a2742363cd0 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
@@ -73,7 +73,7 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 	};
@@ -94,7 +94,7 @@
 	non-removable;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&pio>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts
index df71fab3cf4e..df71fab3cf4e 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts
index 42cd1131adf3..870649760f70 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts
@@ -43,7 +43,7 @@
 			 <1300000 0x1>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi.dtsi
index cf8413fba6c1..cf8413fba6c1 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi.dtsi
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts
index f1f9dbead32a..d2ae47b074bf 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts
@@ -105,7 +105,7 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
 	};
@@ -169,7 +169,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189: sdio_wifi@1 {
+	rtl8189: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts
index 305b34a321f5..6a4316a52469 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts
@@ -143,7 +143,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189ftv: sdio_wifi@1 {
+	rtl8189ftv: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-one.dts
index 59f6f6d5e7ca..59f6f6d5e7ca 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-one.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts
index babf4cf1b2f6..8a49b3376dfc 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts
@@ -63,7 +63,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189ftv: sdio_wifi@1 {
+	rtl8189ftv: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc.dts
index b96e015f54ee..b96e015f54ee 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus.dts
index d05fa679dcd3..d05fa679dcd3 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus2e.dts
index b6ca45d18e51..b6ca45d18e51 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus2e.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
index 561ea1d2f861..97a3565ac7a8 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
@@ -92,13 +92,27 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
 		post-power-on-delay-ms = <200>;
 	};
 };
 
+/*
+ * Audio input/output is exposed on the 13-pin header and can't be used for
+ * anything else. However, adapter boards may use different audio routing.
+ * - http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-Plus-2.html
+ * - Allwinner H3 Datasheet, section 3.1. Pin Characteristics
+ */
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "disabled";
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-rervision-dvk.dts
index 4738f3a9efe4..4738f3a9efe4 100644
--- a/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-rervision-dvk.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-zeropi.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-zeropi.dts
index 7d3e7323b661..7d3e7323b661 100644
--- a/arch/arm/boot/dts/sun8i-h3-zeropi.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-zeropi.dts
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi
index eac2349a2380..cfd039840b43 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi
@@ -262,7 +262,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu_hot_trip>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
diff --git a/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso b/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso
new file mode 100644
index 000000000000..e137eefee341
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ *
+ * Devicetree overlay for the Orange Pi Zero Interface board (OP0014).
+ *
+ *   https://orangepi.com/index.php?route=product/product&product_id=871
+ *
+ * This overlay applies to the following base files:
+ *
+ * - arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
+ * - arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
+ */
+
+/dts-v1/;
+/plugin/;
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
index 3d9a1524e17e..a0f787581dd9 100644
--- a/arch/arm/boot/dts/sun8i-q8-common.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
@@ -62,7 +62,7 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		/*
 		 * Q8 boards use various PL# pins as wifi-en. On other boards
@@ -82,7 +82,7 @@
 };
 
 &ehci0 {
-	status  = "okay";
+	status = "okay";
 };
 
 &mmc1 {
@@ -94,7 +94,7 @@
 	non-removable;
 	status = "okay";
 
-	sdio_wifi: sdio_wifi@1 {
+	sdio_wifi: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts
index bc394686fedb..f4bf46b35bec 100644
--- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts
@@ -88,7 +88,7 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-nes-classic.dts
index 246dec5846a4..246dec5846a4 100644
--- a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-nes-classic.dts
diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-super-nes-classic.dts
index 80761d7904ec..80761d7904ec 100644
--- a/arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-super-nes-classic.dts
diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts
index 95543a9c2118..75067522ff59 100644
--- a/arch/arm/boot/dts/sun8i-r16-parrot.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts
@@ -75,7 +75,7 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
 	};
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts
index 28197bbcb1d5..cd2351acc32f 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts
@@ -100,7 +100,7 @@
 		enable-active-high;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
 		clocks = <&ccu CLK_OUTA>;
diff --git a/arch/arm/boot/dts/sun8i-r40-cpu-opp.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40-cpu-opp.dtsi
index 649928b361af..649928b361af 100644
--- a/arch/arm/boot/dts/sun8i-r40-cpu-opp.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-cpu-opp.dtsi
diff --git a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi
index 9f39b5a2bb35..c12361d0317f 100644
--- a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi
@@ -42,6 +42,13 @@
 	vcc-pg-supply = <&reg_dldo1>;
 };
 
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3-tv-usb";
+};
+
 &reg_aldo2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts b/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts
index 0bd1336206b8..15b0b4de626a 100644
--- a/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts
@@ -62,7 +62,7 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN
 		clocks = <&ccu CLK_OUTA>;
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
index 4ef26d8f5340..f0ed802a9d08 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
@@ -146,7 +146,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu_hot_trip>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -338,6 +338,8 @@
 			resets = <&ccu RST_BUS_VE>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 			allwinner,sram = <&ve_sram 1>;
+			interconnects = <&mbus 4>;
+			interconnect-names = "dma-mem";
 		};
 
 		mmc0: mmc@1c0f000 {
@@ -703,7 +705,7 @@
 			};
 
 			/omit-if-no-ref/
-			uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins{
+			uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins {
 				pins = "PI16", "PI17";
 				function = "uart2";
 			};
diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sun8i-reference-design-tablet.dtsi
index 872d56caa9ce..872d56caa9ce 100644
--- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-reference-design-tablet.dtsi
diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-impetus.dtsi
index 052b010a5607..052b010a5607 100644
--- a/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-impetus.dtsi
diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-initium.dts
index 039677c2cc65..039677c2cc65 100644
--- a/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-initium.dts
diff --git a/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-lichee-zero-plus.dts
index d18192d51d1b..d18192d51d1b 100644
--- a/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-lichee-zero-plus.dts
diff --git a/arch/arm/boot/dts/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
index 20966e954eda..e0d4404b5957 100644
--- a/arch/arm/boot/dts/sun8i-s3-pinecube.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
@@ -51,7 +51,7 @@
 		startup-delay-us = <200000>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */
 		post-power-on-delay-ms = <200>;
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-mangopi-mq-r-t113.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-mangopi-mq-r-t113.dts
new file mode 100644
index 000000000000..8b3a75383816
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-mangopi-mq-r-t113.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2022 Arm Ltd.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+
+#include "sun8i-t113s.dtsi"
+#include "sunxi-d1s-t113-mangopi-mq-r.dtsi"
+
+/ {
+	model = "MangoPi MQ-R-T113";
+	compatible = "widora,mangopi-mq-r-t113", "allwinner,sun8i-t113s";
+
+	aliases {
+		ethernet0 = &rtl8189ftv;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&mmc1 {
+	rtl8189ftv: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 = WL_WAKE_AP */
+		interrupt-names = "host-wake";
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts
new file mode 100644
index 000000000000..5262102a85f6
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s-netcube-nagami.dtsi"
+
+/ {
+	model = "NetCube Systems Nagami Basic Carrier Board";
+	compatible = "netcube,nagami-basic-carrier", "netcube,nagami",
+		     "allwinner,sun8i-t113s";
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2s1 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	broken-cd;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts
new file mode 100644
index 000000000000..4ffa6a0216d8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s-netcube-nagami.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "NetCube Systems Nagami Keypad Carrier Board";
+	compatible = "netcube,nagami-keypad-carrier", "netcube,nagami",
+		     "allwinner,sun8i-t113s";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status_red: led-status-red {
+			gpios = <&pio 3 16 GPIO_ACTIVE_HIGH>;  /* PD16 */
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led_status_green: led-status-green {
+			gpios = <&pio 3 22 GPIO_ACTIVE_HIGH>;  /* PD22 */
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	tca8418: keypad@34 {
+		compatible = "ti,tca8418";
+		reg = <0x34>;
+		interrupts-extended = <&pio 5 6 IRQ_TYPE_EDGE_FALLING>;  /* PF6 */
+		linux,keymap = <MATRIX_KEY(0x03, 0x00, KEY_NUMERIC_A)
+				MATRIX_KEY(0x03, 0x01, KEY_NUMERIC_1)
+				MATRIX_KEY(0x03, 0x02, KEY_NUMERIC_2)
+				MATRIX_KEY(0x03, 0x03, KEY_NUMERIC_3)
+				MATRIX_KEY(0x02, 0x00, KEY_NUMERIC_B)
+				MATRIX_KEY(0x02, 0x01, KEY_NUMERIC_4)
+				MATRIX_KEY(0x02, 0x02, KEY_NUMERIC_5)
+				MATRIX_KEY(0x02, 0x03, KEY_NUMERIC_6)
+				MATRIX_KEY(0x01, 0x00, KEY_NUMERIC_C)
+				MATRIX_KEY(0x01, 0x01, KEY_NUMERIC_7)
+				MATRIX_KEY(0x01, 0x02, KEY_NUMERIC_8)
+				MATRIX_KEY(0x01, 0x03, KEY_NUMERIC_9)
+				MATRIX_KEY(0x00, 0x00, KEY_NUMERIC_D)
+				MATRIX_KEY(0x00, 0x01, KEY_CLEAR)
+				MATRIX_KEY(0x00, 0x02, KEY_NUMERIC_0)
+				MATRIX_KEY(0x00, 0x03, KEY_OK)
+		>;
+		keypad,num-rows = <4>;
+		keypad,num-columns = <4>;
+	};
+};
+
+&pio {
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PB
+			  "", "", "UART3_TX", "UART3_RX",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "eMMC_CLK", "eMMC_CMD", // PC
+			  "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "USB_SEC_EN", "", "",
+			  "", "", "", "",
+			  "LED_STATUS_RED", "", "", "",
+			  "I2C2_SCL", "I2C2_SDA", "LED_STATUS_GREEN", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE
+			  "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "",
+			  "ETH_MDC", "ETH_MDIO", "QWIIC_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PF
+			  "", "", "KEY_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "UART1_TXD", "UART1_RXD",
+			  "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi
new file mode 100644
index 000000000000..544d60cfc32e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NetCube Systems Nagami SoM";
+	compatible = "netcube,nagami", "allwinner,sun8i-t113s";
+
+	aliases {
+		serial1 = &uart1; // ESP32 Bootloader UART
+		serial3 = &uart3; // Console UART on Card Edge
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	/* module wide 3.3V supply directly from the card edge */
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */
+	reg_vcc_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-core";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		vin-supply = <&reg_vcc3v3>;
+	};
+
+	/* USB0 MUX to switch connect to Card-Edge only after BootROM */
+	usb0_sec_mux: mux-controller{
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&pio 3 9 GPIO_ACTIVE_HIGH>; /* PD9 */
+		idle-state = <1>; /* USB connected to Card-Edge by default */
+	};
+
+	/* Reset of ESP32 */
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; /* PG9 */
+		post-power-on-delay-ms = <1500>;
+		power-off-delay-us = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&emac {
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+	phy-handle = <&lan8720a>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&rmii_pe_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Default I2C Interface on Card-Edge */
+&i2c2 {
+	pinctrl-0 = <&i2c2_pd_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Exposed as the QWIIC connector and used by the internal EEPROM */
+&i2c3 {
+	pinctrl-0 = <&i2c3_pg_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c02";		/* actually it's a 24AA02E48 */
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth0_macaddress: macaddress@fa {
+			reg = <0xfa 0x06>;
+		};
+	};
+};
+
+/* Default I2S Interface on Card-Edge */
+&i2s1 {
+	pinctrl-0 = <&i2s1_pins>, <&i2s1_din0_pin>, <&i2s1_dout0_pin>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Phy is on SoM. MDI signals pre-magnetics are on the card edge */
+&mdio {
+	lan8720a: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+/* Default SD Interface on Card-Edge */
+&mmc0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Connected to the on-board ESP32 */
+&mmc1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+};
+
+/* Connected to the on-board eMMC */
+&mmc2 {
+	pinctrl-0 = <&mmc2_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pd-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "CAN0_TX", "CAN0_RX", // PB
+			  "CAN1_TX", "CAN1_RX", "UART3_TX", "UART3_RX",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "eMMC_CLK", "eMMC_CMD", // PC
+			  "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "USB_SEC_EN", "SPI1_CS", "SPI1_CLK",
+			  "SPI1_MOSI", "SPI1_MISO", "SPI1_HOLD", "SPI1_WP",
+			  "PD16", "", "", "",
+			  "I2C2_SCL", "I2C2_SDA", "PD22", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE
+			  "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "",
+			  "ETH_MDC", "ETH_MDIO", "QWIIC_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SD_D1", "SD_D0", "SD_CLK", "SD_CLK", // PF
+			  "SD_D3", "SD_D2", "PF6", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "UART1_TXD", "UART1_RXD",
+			  "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA",
+			  "I2S1_WS", "I2S1_CLK", "I2S1_DIN0", "I2S1_DOUT0",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+/* Remove the unused CK pin from the pinctl as it is unconnected */
+&rmii_pe_pins {
+	pins = "PE0", "PE1", "PE2", "PE3", "PE4",
+	       "PE5", "PE6", "PE8", "PE9";
+};
+
+/* Default SPI Interface on Card-Edge */
+&spi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&spi1_pins>, <&spi1_hold_pin>, <&spi1_wp_pin>;
+	pinctrl-names = "default";
+	cs-gpios = <0>;
+	status = "disabled";
+};
+
+/* Connected to the Bootloader/Console of the ESP32 */
+&uart1 {
+	pinctrl-0 = <&uart1_pg6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Console/Debug UART on Card-Edge */
+&uart3 {
+	pinctrl-0 = <&uart3_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi
new file mode 100644
index 000000000000..c7181308ae6f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2022 Arm Ltd.
+
+#define SOC_PERIPHERAL_IRQ(nr) GIC_SPI nr
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <riscv/allwinner/sunxi-d1s-t113.dtsi>
+#include <riscv/allwinner/sunxi-d1-t113.dtsi>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+		};
+	};
+
+	gic: interrupt-controller@1c81000 {
+		compatible = "arm,gic-400";
+		reg = <0x03021000 0x1000>,
+		      <0x03022000 0x2000>,
+		      <0x03024000 0x2000>,
+		      <0x03026000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts b/arch/arm/boot/dts/allwinner/sun8i-t3-cqa3t-bv3.dts
index 9f472521f4a4..9f472521f4a4 100644
--- a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-t3-cqa3t-bv3.dts
diff --git a/arch/arm/boot/dts/sun8i-v3-sl631-imx179.dts b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631-imx179.dts
index 117aeece4e55..117aeece4e55 100644
--- a/arch/arm/boot/dts/sun8i-v3-sl631-imx179.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631-imx179.dts
diff --git a/arch/arm/boot/dts/sun8i-v3-sl631.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631.dtsi
index 6f93f8c49f84..6f93f8c49f84 100644
--- a/arch/arm/boot/dts/sun8i-v3-sl631.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631.dtsi
diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi
index 186c30cbe6ee..95bd0b616349 100644
--- a/arch/arm/boot/dts/sun8i-v3.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi
@@ -56,6 +56,15 @@
 		function = "i2s";
 	};
 
+	/omit-if-no-ref/
+	lcd_rgb666_pd_pins: lcd-rgb666-pd-pins {
+		pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
+		       "PD6", "PD7", "PD8", "PD9", "PD10", "PD11",
+		       "PD12", "PD13", "PD14", "PD15", "PD16", "PD17",
+		       "PD18", "PD19", "PD20", "PD21";
+		function = "lcd";
+	};
+
 	uart1_pg_pins: uart1-pg-pins {
 		pins = "PG6", "PG7";
 		function = "uart1";
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-anbernic-rg-nano.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-anbernic-rg-nano.dts
new file mode 100644
index 000000000000..f34dfdf1566d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-anbernic-rg-nano.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include "sun8i-v3s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Anbernic RG Nano";
+	compatible = "anbernic,rg-nano", "allwinner,sun8i-v3s";
+
+	aliases {
+		rtc0 = &pcf8563;
+		rtc1 = &rtc;
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1 2 3 8 14 21 32 46 60 80 100>;
+		default-brightness-level = <11>;
+		power-supply = <&reg_vcc5v0>;
+		pwms = <&pwm 0 40000 1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		button-a {
+			gpios = <&gpio_expander 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-A";
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			gpios = <&gpio_expander 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-B";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio_expander 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-left {
+			gpios = <&gpio_expander 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-right {
+			gpios = <&gpio_expander 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-se {
+			gpios = <&gpio_expander 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-st {
+			gpios = <&gpio_expander 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-START";
+			linux,code = <BTN_START>;
+		};
+
+		button-tl {
+			gpios = <&gpio_expander 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-L";
+			linux,code = <BTN_TL>;
+		};
+
+		button-tr {
+			gpios = <&gpio_expander 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-R";
+			linux,code = <BTN_TR>;
+		};
+
+		button-up {
+			gpios = <&gpio_expander 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio_expander 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-X";
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			gpios = <&gpio_expander 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-Y";
+			linux,code = <BTN_WEST>;
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Speaker", "HP",
+				  "MIC1", "Mic",
+				  "Mic", "HBIAS";
+	allwinner,pa-gpios = <&pio 5 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PF6 */
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	gpio_expander: gpio@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <1 3 IRQ_TYPE_EDGE_BOTH>; /* PB3/EINT3 */
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&pio>;
+		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5/EINT5 */
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+
+	spi0_no_miso_pins: spi0-no-miso-pins {
+		pins = "PC1", "PC2", "PC3";
+		function = "spi0";
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm0_pin>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* DCDC2 wired into vdd-cpu, vdd-sys, and vdd-ephy. */
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-max-microvolt = <1250000>;
+	regulator-min-microvolt = <1250000>;
+	regulator-name = "vdd-cpu";
+};
+
+/* DCDC3 wired into every 3.3v input that isn't the RTC. */
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-max-microvolt = <3300000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-name = "vcc-io";
+};
+
+/* LDO1 wired into RTC, voltage is hard-wired at 3.3v. */
+&reg_ldo1 {
+	regulator-always-on;
+	regulator-name = "vcc-rtc";
+};
+
+/* LDO2 wired into VCC-PLL and audio codec. */
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-max-microvolt = <3000000>;
+	regulator-min-microvolt = <3000000>;
+	regulator-name = "vcc-pll";
+};
+
+/* LDO3, LDO4, and LDO5 unused. */
+&reg_ldo3 {
+	status = "disabled";
+};
+
+&reg_ldo4 {
+	status = "disabled";
+};
+
+/* RTC uses internal oscillator */
+&rtc {
+	/delete-property/ clocks;
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_no_miso_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	display@0 {
+		compatible = "saef,sftc154b", "panel-mipi-dbi-spi";
+		reg = <0>;
+		backlight = <&backlight>;
+		dc-gpios = <&pio 2 0 GPIO_ACTIVE_HIGH>; /* PC0 */
+		reset-gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+		spi-max-frequency = <100000000>;
+
+		height-mm = <39>;
+		width-mm = <39>;
+
+		/* Set hb-porch to compensate for non-visible area */
+		panel-timing {
+			hactive = <240>;
+			vactive = <240>;
+			hback-porch = <80>;
+			vback-porch = <0>;
+			clock-frequency = <0>;
+			hfront-porch = <0>;
+			hsync-len = <0>;
+			vfront-porch = <0>;
+			vsync-len = <0>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG5 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero-dock.dts
index 752ad05c8f83..752ad05c8f83 100644
--- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero-dock.dts
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero.dts
index 2e4587d26ce5..2e4587d26ce5 100644
--- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero.dts
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts
new file mode 100644
index 000000000000..cb6292319f39
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-v3s.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/{
+	model = "NetCube Systems Kumquat";
+	compatible = "netcube,kumquat", "allwinner,sun8i-v3s";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &emac;
+		rtc0 = &ds3232;
+		rtc1 = &rtc; /* not battery backed */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* 40 MHz Crystal Oscillator on PCB */
+	clk_can0: clock-can0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-user {
+			label = "GPIO Key User";
+			linux,code = <KEY_PROG1>;
+			gpios = <&pio 1 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PB2 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-heartbeat {
+			gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
+			linux,default-trigger = "heartbeat";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+
+		led-mmc0-act {
+			gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+			linux,default-trigger = "mmc0";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK;
+		};
+	};
+
+	/* EA3036C Switching 3 Channel Regulator - Channel 2 */
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* K7805-1000R3 Switching Regulator supplied from main 12/24V terminal block */
+	reg_vcc5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Headphone", "HPCOM",
+		"MIC1", "Mic",
+		"Mic", "HBIAS";
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&emac {
+	allwinner,leds-active-low;
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c02";		/* actually it's a 24AA02E48 */
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth0_macaddress: macaddress@fa {
+			reg = <0xfa 0x06>;
+		};
+	};
+
+	tusb320: typec@60 {
+		compatible = "ti,tusb320";
+		reg = <0x60>;
+		interrupts-extended = <&pio 1 5 IRQ_TYPE_LEVEL_LOW>;  /* PB5 */
+	};
+
+	ds3232: rtc@68 {
+		compatible = "dallas,ds3232";
+		reg = <0x68>;
+	};
+};
+
+/* Exposed as the Flash/SD Header on the board */
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+/* Connected to the on-board ESP32 */
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+/* Disable external 32k osc as it is broken on current revision */
+&osc32k {
+	status = "disabled";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "CAN_nCS", "CAN_nINT", "USER_SW", "PB3", // PB
+			  "USB_ID", "USBC_nINT", "I2C0_SCL", "I2C0_SDA",
+			  "UART0_TX", "UART0_RX", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SPI_MISO", "SPI_SCK", "FLASH_nCS", "SPI_MOSI", // PC
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "Q12", "Q11", "Q10", "Q9", // PE
+			  "LED_SYS0", "I1", "Q1", "Q2",
+			  "I2", "I3", "Q3", "Q4",
+			  "I4", "I5", "Q5", "Q6",
+			  "I6", "I7", "Q7", "Q8",
+			  "I8", "UART1_TXD", "UART1_RXD", "ESP_nRST",
+			  "ESP_nBOOT", "", "", "",
+			  "", "", "", "",
+			  "SD_D1", "SD_D0", "SD_CLK", "SD_CMD", // PF
+			  "SD_D3", "SD_D2", "LED_SYS1", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+/* Disable external 32k osc as it is broken on current revision */
+&rtc {
+	/delete-property/ clocks;
+};
+
+/* Exposed as a USB-C connector with USB-Serial converter */
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Connected to the Bootloader/Console of the ESP32 */
+&uart1 {
+	pinctrl-0 = <&uart1_pe_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	extcon = <&tusb320 0>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	status = "okay";
+};
+
+&spi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <0>, <&pio 1 0 GPIO_ACTIVE_LOW>; /* PB0 */
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		label = "firmware";
+		spi-max-frequency = <40000000>;
+	};
+
+	can@1 {
+		compatible = "microchip,mcp2518fd";
+		reg = <1>;
+		clocks = <&clk_can0>;
+		interrupts-extended = <&pio 1 1 IRQ_TYPE_LEVEL_LOW>;  /* PB1 */
+		spi-max-frequency = <20000000>;
+		vdd-supply = <&reg_vcc3v3>;
+		xceiver-supply = <&reg_vcc3v3>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
index db194c606fdc..fa54510319ac 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
@@ -98,7 +98,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		osc24M: osc24M_clk {
+		osc24M: osc24M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -106,7 +106,7 @@
 			clock-output-names = "osc24M";
 		};
 
-		osc32k: osc32k_clk {
+		osc32k: osc32k-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
@@ -191,7 +191,7 @@
 				 <&ccu CLK_TCON0>;
 			clock-names = "ahb",
 				      "tcon-ch0";
-			clock-output-names = "tcon-pixel-clock";
+			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
 			resets = <&ccu RST_BUS_TCON0>;
 			reset-names = "lcd";
@@ -319,6 +319,29 @@
 			#phy-cells = <1>;
 		};
 
+		ehci: usb@1c1a000 {
+			compatible = "allwinner,sun8i-v3s-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci: usb@1c1a400 {
+			compatible = "allwinner,sun8i-v3s-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
 		ccu: clock@1c20000 {
 			compatible = "allwinner,sun8i-v3s-ccu";
 			reg = <0x01c20000 0x400>;
@@ -388,11 +411,26 @@
 				function = "i2c1";
 			};
 
+			/omit-if-no-ref/
+			lcd_rgb666_pe_pins: lcd-rgb666-pe-pins {
+				pins = "PE0", "PE1", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10", "PE11",
+				       "PE12", "PE13", "PE14", "PE15", "PE16", "PE17",
+				       "PE18", "PE19", "PE23", "PE24";
+				function = "lcd";
+			};
+
 			uart0_pb_pins: uart0-pb-pins {
 				pins = "PB8", "PB9";
 				function = "uart0";
 			};
 
+			/omit-if-no-ref/
+			uart1_pe_pins: uart1-pe-pins {
+				pins = "PE21", "PE22";
+				function = "uart1";
+			};
+
 			uart2_pins: uart2-pins {
 				pins = "PB0", "PB1";
 				function = "uart2";
@@ -414,6 +452,18 @@
 				bias-pull-up;
 			};
 
+			/omit-if-no-ref/
+			pwm0_pin: pwm0-pin {
+				pins = "PB4";
+				function = "pwm0";
+			};
+
+			/omit-if-no-ref/
+			pwm1_pin: pwm1-pin {
+				pins = "PB5";
+				function = "pwm1";
+			};
+
 			spi0_pins: spi0-pins {
 				pins = "PC0", "PC1", "PC2", "PC3";
 				function = "spi0";
@@ -479,7 +529,7 @@
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
@@ -492,7 +542,7 @@
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART1>;
 			status = "disabled";
 		};
@@ -505,7 +555,7 @@
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART2>;
 			pinctrl-0 = <&uart2_pins>;
 			pinctrl-names = "default";
@@ -611,7 +661,7 @@
 			reg = <0x01cb4000 0x3000>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_CSI>,
-				 <&ccu CLK_CSI1_SCLK>,
+				 <&ccu CLK_CSI_SCLK>,
 				 <&ccu CLK_DRAM_CSI>;
 			clock-names = "bus", "mod", "ram";
 			resets = <&ccu RST_BUS_CSI>;
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts
index 434871040aca..6575ef274453 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts
@@ -94,7 +94,7 @@
 		enable-active-high;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
 		clocks = <&ccu CLK_OUTA>;
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts
index c8ca8cb7f5c9..52ad95a2063a 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts
@@ -280,8 +280,8 @@
 
 			reg_dcdc5: dcdc5 {
 				regulator-always-on;
-				regulator-min-microvolt = <1425000>;
-				regulator-max-microvolt = <1575000>;
+				regulator-min-microvolt = <1450000>;
+				regulator-max-microvolt = <1550000>;
 				regulator-name = "vcc-dram";
 			};
 
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/allwinner/sun9i-a80-optimus.dts
index 5c3580d712e4..5c3580d712e4 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80-optimus.dts
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
index 7d3f3300f431..a1ae0929cec9 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
@@ -196,14 +196,14 @@
 		 * The actual TX clock rate is not controlled by the
 		 * gmac_tx clock.
 		 */
-		mii_phy_tx_clk: mii_phy_tx_clk {
+		mii_phy_tx_clk: mii-phy-tx-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <25000000>;
 			clock-output-names = "mii_phy_tx";
 		};
 
-		gmac_int_tx_clk: gmac_int_tx_clk {
+		gmac_int_tx_clk: gmac-int-tx-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <125000000>;
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts
new file mode 100644
index 000000000000..472ded0aafcf
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Lichee Pi Nano";
+	compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
+
+	aliases {
+		mmc0 = &mmc0;
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pe_pins>;
+	status = "okay";
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Headphone", "HPCOM",
+		"MIC", "Mic";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
new file mode 100644
index 000000000000..e4b41bc93852
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
+ */
+
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	clocks {
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0x0>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram-controller@1c00000 {
+			compatible = "allwinner,suniv-f1c100s-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,suniv-f1c100s-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,suniv-f1c100s-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,suniv-f1c100s-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,suniv-f1c100s-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <23>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,suniv-f1c100s-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <24>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,suniv-f1c100s-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <26>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			compatible = "allwinner,suniv-f1c100s-usb-phy";
+			reg = <0x01c13400 0x10>;
+			reg-names = "phy_ctrl";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,suniv-f1c100s-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <18>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <2>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,suniv-f1c100s-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller@1c20400 {
+			compatible = "allwinner,suniv-f1c100s-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,suniv-f1c100s-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <38>, <39>, <40>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+			};
+
+			/omit-if-no-ref/
+			i2c0_pd_pins: i2c0-pd-pins {
+				pins = "PD0", "PD12";
+				function = "i2c0";
+			};
+
+			spi0_pc_pins: spi0-pc-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			uart0_pe_pins: uart0-pe-pins {
+				pins = "PE0", "PE1";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pa_pins: uart1-pa-pins {
+				pins = "PA2", "PA3";
+				function = "uart1";
+			};
+		};
+
+		i2c0: i2c@1c27000 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27000 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@1c27400 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27400 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1c27800 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27800 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,suniv-f1c100s-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <13>, <14>, <15>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20ca0 {
+			compatible = "allwinner,suniv-f1c100s-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <16>;
+			clocks = <&osc32k>;
+		};
+
+		pwm: pwm@1c21000 {
+			compatible = "allwinner,suniv-f1c100s-pwm",
+				     "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21000 0x400>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		ir: ir@1c22c00 {
+			compatible = "allwinner,suniv-f1c100s-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c22c00 0x400>;
+			clocks = <&ccu CLK_BUS_IR>, <&ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&ccu RST_BUS_IR>;
+			interrupts = <6>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c23400 {
+			compatible = "allwinner,suniv-f1c100s-lradc",
+				     "allwinner,sun8i-a83t-r-lradc";
+			reg = <0x01c23400 0x400>;
+			interrupts = <22>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c25000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c25400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c25800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		codec: codec@1c23c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,suniv-f1c100s-codec";
+			reg = <0x01c23c00 0x400>;
+			interrupts = <21>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 12>,
+			       <&dma SUN4I_DMA_NORMAL 12>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_CODEC>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c200s-lctech-pi.dts b/arch/arm/boot/dts/allwinner/suniv-f1c200s-lctech-pi.dts
new file mode 100644
index 000000000000..2d2a3f026df3
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c200s-lctech-pi.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Arm Ltd,
+ * based on work:
+ *   Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Lctech Pi F1C200s";
+	compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s",
+		     "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pa_pins>;
+	status = "okay";
+};
+
+/*
+ * This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected
+ * to Vin, which supplies the board. Host mode works (if the board is powered
+ * otherwise), but peripheral is probably the intention.
+ */
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c200s-popstick-v1.1.dts b/arch/arm/boot/dts/allwinner/suniv-f1c200s-popstick-v1.1.dts
new file mode 100644
index 000000000000..184c245041a6
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c200s-popstick-v1.1.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Popcorn Computer PopStick v1.1";
+	compatible = "sourceparts,popstick-v1.1", "sourceparts,popstick",
+		     "allwinner,suniv-f1c200s", "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 4 6 GPIO_ACTIVE_HIGH>; /* PE6 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pe_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi
index 235994a4a2eb..235994a4a2eb 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi
index e899d14f38c3..873817ddb4ea 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi
@@ -89,16 +89,16 @@
 	};
 
 	reg_gmac_3v3: gmac-3v3 {
-		      compatible = "regulator-fixed";
-		      regulator-name = "gmac-3v3";
-		      regulator-min-microvolt = <3300000>;
-		      regulator-max-microvolt = <3300000>;
-		      startup-delay-us = <100000>;
-		      enable-active-high;
-		      gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/allwinner/sunxi-common-regulators.dtsi
index d8e5826fb3de..d8e5826fb3de 100644
--- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-common-regulators.dtsi
diff --git a/arch/arm/boot/dts/allwinner/sunxi-d1s-t113-mangopi-mq-r.dtsi b/arch/arm/boot/dts/allwinner/sunxi-d1s-t113-mangopi-mq-r.dtsi
new file mode 100644
index 000000000000..a415c4a78a70
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-d1s-t113-mangopi-mq-r.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2022 Arm Ltd.
+/*
+ * Common peripherals and configurations for MangoPi MQ-R boards.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */
+		};
+	};
+
+	/* board wide 5V supply directly from the USB-C socket */
+	reg_vcc5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	/* SY8008 DC/DC regulator on the board */
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	/* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */
+	reg_vcc_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-core";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	/* XC6206 LDO on the board */
+	reg_avdd2v8: regulator-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&reg_3v3>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+	};
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_3v3>;
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_3v3>;
+	vcc-pd-supply = <&reg_3v3>;
+	vcc-pe-supply = <&reg_avdd2v8>;
+	vcc-pf-supply = <&reg_3v3>;
+	vcc-pg-supply = <&reg_3v3>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pb_pins>;
+	status = "okay";
+};
+
+/* The USB-C socket has its CC pins pulled to GND, so is hardwired as a UFP. */
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi
index 60804b0e6c56..be5f5528a118 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi
@@ -18,7 +18,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
 		post-power-on-delay-ms = <200>;
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi
index 09aefb4e90f8..7df60515a903 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi
@@ -83,7 +83,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		osc24M: osc24M_clk {
+		osc24M: osc24M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -91,7 +91,7 @@
 			clock-output-names = "osc24M";
 		};
 
-		osc32k: osc32k_clk {
+		osc32k: osc32k-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
@@ -302,6 +302,8 @@
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
 			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -312,6 +314,8 @@
 			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
 				 <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -706,7 +710,7 @@
 			clocks = <&ccu CLK_BUS_UART0>;
 			resets = <&ccu RST_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -719,7 +723,7 @@
 			clocks = <&ccu CLK_BUS_UART1>;
 			resets = <&ccu RST_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -732,7 +736,7 @@
 			clocks = <&ccu CLK_BUS_UART2>;
 			resets = <&ccu RST_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -745,7 +749,7 @@
 			clocks = <&ccu CLK_BUS_UART3>;
 			resets = <&ccu RST_BUS_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/allwinner/sunxi-itead-core-common.dtsi
index 0d002f83a259..0d002f83a259 100644
--- a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-itead-core-common.dtsi
diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-cc.dtsi
index 89731bb34c6b..89731bb34c6b 100644
--- a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-cc.dtsi
diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-it.dtsi
index 50d328c2a84d..50d328c2a84d 100644
--- a/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-it.dtsi
diff --git a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sunxi-reference-design-tablet.dtsi
index 117198c52e1f..117198c52e1f 100644
--- a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-reference-design-tablet.dtsi
diff --git a/arch/arm/boot/dts/alphascale/Makefile b/arch/arm/boot/dts/alphascale/Makefile
new file mode 100644
index 000000000000..8d1314fc79d0
--- /dev/null
+++ b/arch/arm/boot/dts/alphascale/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_ASM9260) += \
+	alphascale-asm9260-devkit.dtb
+dtb-$(CONFIG_MACH_ASM9260) += \
+	alphascale-asm9260-devkit.dtb
diff --git a/arch/arm/boot/dts/alphascale-asm9260-devkit.dts b/arch/arm/boot/dts/alphascale/alphascale-asm9260-devkit.dts
index c77e2c902fb6..c77e2c902fb6 100644
--- a/arch/arm/boot/dts/alphascale-asm9260-devkit.dts
+++ b/arch/arm/boot/dts/alphascale/alphascale-asm9260-devkit.dts
diff --git a/arch/arm/boot/dts/alphascale-asm9260.dtsi b/arch/arm/boot/dts/alphascale/alphascale-asm9260.dtsi
index 2ce6038536fd..2ce6038536fd 100644
--- a/arch/arm/boot/dts/alphascale-asm9260.dtsi
+++ b/arch/arm/boot/dts/alphascale/alphascale-asm9260.dtsi
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
deleted file mode 100644
index daf4cb398070..000000000000
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ /dev/null
@@ -1,83 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "OnRISC Baltos iR 2110";
-};
-
-&am33xx_pinmux {
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&davinci_mdio_sw {
-	phy0: ethernet-phy@0 {
-		reg = <1>;
-	};
-};
-
-&cpsw_port1 {
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-	phy-handle = <&phy0>;
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	phy-handle = <&phy1>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
deleted file mode 100644
index 2123bd589484..000000000000
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "OnRISC Baltos iR 3220";
-};
-
-&am33xx_pinmux {
-	tca6416_pins: pinmux_tca6416_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
-
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&i2c1 {
-	tca6416: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tca6416_pins>;
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cpsw_port1 {
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-	fixed-link {
-		speed = <100>;
-		full-duplex;
-	};
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	phy-handle = <&phy1>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
deleted file mode 100644
index 2f3872dbf4f4..000000000000
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "OnRISC Baltos iR 5221";
-};
-
-&am33xx_pinmux {
-	tca6416_pins: pinmux_tca6416_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
-		>;
-	};
-
-
-	dcan1_pins: pinmux_dcan1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)      /* uart0_ctsn.dcan1_tx_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)      /* uart0_rtsn.dcan1_rx_mux0 */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
-
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&i2c1 {
-	tca6416: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tca6416_pins>;
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cpsw_port1 {
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-	fixed-link {
-		speed = <100>;
-		full-duplex;
-	};
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	phy-handle = <&phy1>;
-};
-
-&dcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-
-	status = "okay";
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
deleted file mode 100644
index 57e756b0f192..000000000000
--- a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
+++ /dev/null
@@ -1,87 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "NetCAN";
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led@1 {
-			label = "can_data";
-			linux,default-trigger = "netdev";
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-		led@2 {
-			label = "can_error";
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	user_leds_s0: user_leds_s0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* CAN Data LED */
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* CAN Error LED */
-		>;
-	};
-
-	dcan1_pins: pinmux_dcan1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)	/* CAN TX */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)	/* CAN RX */
-		>;
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&davinci_mdio_sw {
-	phy0: ethernet-phy@0 {
-		reg = <1>;
-	};
-};
-
-&cpsw_port1 {
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-	phy-handle = <&phy0>;
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	phy-handle = <&phy1>;
-};
-
-&dcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
deleted file mode 100644
index c6cc1c6218a9..000000000000
--- a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "NetCom Plus";
-};
-
-&am33xx_pinmux {
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)			/* RX */
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)			/* TX */
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)		/* CTS */
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* RTS */
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)		/* DTR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* DSR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* DCD */
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* RI */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)		/* RX */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      		/* TX */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* CTS */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* RTS */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* DTR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* DSR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* DCD */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* RI */
-		>;
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	phy0: ethernet-phy@0 {
-		reg = <1>;
-	};
-};
-
-&cpsw_port1 {
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-	phy-handle = <&phy0>;
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	phy-handle = <&phy1>;
-};
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
deleted file mode 100644
index 96dffd3ffd85..000000000000
--- a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-
-/ {
-	model = "NetCom Plus";
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dip_switches>;
-
-	dip_switches: pinmux_dip_switches {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	tca6416_pins: pinmux_tca6416_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
-		>;
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&i2c1 {
-	tca6416a: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tca6416_pins>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tca6416b: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	tca6416c: gpio@21 {
-		compatible = "ti,tca6416";
-		reg = <0x21>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&davinci_mdio_sw {
-	phy0: ethernet-phy@0 {
-		reg = <1>;
-	};
-};
-
-&cpsw_port1 {
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-	phy-handle = <&phy0>;
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	phy-handle = <&phy1>;
-};
diff --git a/arch/arm/boot/dts/amazon/Makefile b/arch/arm/boot/dts/amazon/Makefile
new file mode 100644
index 000000000000..58af5c4846ef
--- /dev/null
+++ b/arch/arm/boot/dts/amazon/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ALPINE) += \
+	alpine-db.dtb
+dtb-$(CONFIG_ARCH_ALPINE) += \
+	alpine-db.dtb
diff --git a/arch/arm/boot/dts/alpine-db.dts b/arch/arm/boot/dts/amazon/alpine-db.dts
index dfb5a0802273..dfb5a0802273 100644
--- a/arch/arm/boot/dts/alpine-db.dts
+++ b/arch/arm/boot/dts/amazon/alpine-db.dts
diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/amazon/alpine.dtsi
index 4be9887033f9..90bd12feac01 100644
--- a/arch/arm/boot/dts/alpine.dtsi
+++ b/arch/arm/boot/dts/amazon/alpine.dtsi
@@ -126,7 +126,7 @@
 				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		uart0: uart@fd883000 {
+		uart0: serial@fd883000 {
 			compatible = "ns16550a";
 			reg = <0x0 0xfd883000 0x0 0x1000>;
 			clock-frequency = <375000000>;
@@ -135,7 +135,7 @@
 			reg-io-width = <4>;
 		};
 
-		uart1: uart@fd884000 {
+		uart1: serial@fd884000 {
 			compatible = "ns16550a";
 			reg = <0x0 0xfd884000 0x0 0x1000>;
 			clock-frequency = <375000000>;
@@ -167,7 +167,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <96>;
 			al,msi-num-spis = <64>;
diff --git a/arch/arm/boot/dts/amlogic/Makefile b/arch/arm/boot/dts/amlogic/Makefile
new file mode 100644
index 000000000000..3c8a1e88b386
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_MESON8) += \
+	meson8-minix-neo-x8.dtb \
+	meson8-fernsehfee3.dtb \
+	meson8b-ec100.dtb \
+	meson8b-mxq.dtb \
+	meson8b-odroidc1.dtb \
+	meson8m2-mxiii-plus.dtb
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/amlogic/meson.dtsi
index 8e3860d5d916..28ec2c821cdc 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson.dtsi
@@ -23,7 +23,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		cbus: cbus@c1100000 {
+		cbus: bus@c1100000 {
 			compatible = "simple-bus";
 			reg = <0xc1100000 0x200000>;
 			#address-cells = <1>;
@@ -206,7 +206,7 @@
 			};
 		};
 
-		aobus: aobus@c8100000 {
+		aobus: bus@c8100000 {
 			compatible = "simple-bus";
 			reg = <0xc8100000 0x100000>;
 			#address-cells = <1>;
@@ -255,8 +255,6 @@
 
 		usb0: usb@c9040000 {
 			compatible = "snps,dwc2";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0xc9040000 0x40000>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usb0_phy>;
@@ -270,8 +268,6 @@
 
 		usb1: usb@c90c0000 {
 			compatible = "snps,dwc2";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0xc90c0000 0x40000>;
 			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usb1_phy>;
@@ -302,7 +298,7 @@
 			reg = <0xd9040000 0x10000>;
 		};
 
-		secbus: secbus@da000000 {
+		secbus: bus@da000000 {
 			compatible = "simple-bus";
 			reg = <0xda000000 0x6000>;
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts b/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts
new file mode 100644
index 000000000000..4e52447d51bd
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+// Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+#include "meson8.dtsi"
+
+/ {
+	model = "Fernsehfee 3.0";
+	compatible = "tcu,fernsehfee3", "amlogic,meson8";
+
+	aliases {
+		serial0 = &uart_AO;
+		gpiochip0 = &gpio;
+		gpiochip1 = &gpio_ao;
+		i2c0 = &i2c_AO;
+		i2c1 = &i2c_B;
+		mmc0 = &sdhc;
+		mmc1 = &sdio;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;  /* 1 GiB */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/*
+			 * The power LED can be turned red, otherwise it is green.
+			 */
+			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+
+	vcc_5v: regulator-5v {
+		/* 5V rail, always on as long as the system is running */
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-3v3 {
+		/* Chipown AP2420 step-down converter */
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v>;
+	};
+
+	wifi_3v3: regulator-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V-WIFI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+		gpio = <&gpio GPIOX_11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101A (0x02430c54) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_pins>;
+	pinctrl-names = "default";
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+		system-power-controller;
+
+		regulators {
+			vcck: DCDC1 {
+				regulator-name = "VCCK";
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddee: DCDC2 {
+				/* the output is also used as VDDAO */
+				regulator-name = "VDD_EE";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			DCDC3 {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "VDDIO_AO28";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO2 {
+				regulator-name = "VDDIO_AO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc1v8_usb: LDO3 {
+				regulator-name = "VCC1V8_USB";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			LDO4 {
+				/* This one appears to be unused */
+				regulator-name = "VCC2V8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+			};
+
+			LDO5 {
+				regulator-name = "AVDD1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC1 {
+				regulator-name = "VDD_LDO";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC2 {
+				regulator-name = "RTC_0V9";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		/* Fairchild FM24C08A */
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+		wp-gpios = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		num-addresses = <4>;
+	};
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+
+	/* TODO: SiI9293 HDMI receiver @ 0x39 */
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&sdhc {
+	status = "okay";
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	/* eMMC */
+	bus-width = <8>;
+	max-frequency = <100000000>;
+
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sdio;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
+&sdio {
+	status = "okay";
+	pinctrl-0 = <&sd_b_pins>;
+
+	/* SD card */
+	slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&vcc1v8_usb>;
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi: wifi@1 {
+		/* Realtek RTL8188 2.4GHz WiFi module */
+		compatible = "usbbda,179";
+		reg = <1>;
+		vdd-supply = <&wifi_3v3>;
+	};
+};
+
+&usb1_phy {
+	status = "okay";
+	phy-supply = <&vcc1v8_usb>;
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts
index 56ea875c418c..62987eadc747 100644
--- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts
+++ b/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts
@@ -19,7 +19,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
@@ -27,7 +27,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-blue {
 			label = "x8:blue:power";
 			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>;
 		};
@@ -93,5 +93,6 @@
 &ethmac {
 	status = "okay";
 	pinctrl-0 = <&eth_pins>;
-	pnictrl-names = "default";
+	pinctrl-names = "default";
+	phy-mode = "rmii";
 };
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/amlogic/meson8.dtsi
index 0f8bac8bac8b..a609b5a0fda4 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson8.dtsi
@@ -133,7 +133,7 @@
 		};
 	};
 
-	gpu_opp_table: gpu-opp-table {
+	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-182142857 {
@@ -196,7 +196,7 @@
 	};
 
 	thermal-zones {
-		soc {
+		soc-thermal {
 			polling-delay-passive = <250>; /* milliseconds */
 			polling-delay = <1000>; /* milliseconds */
 			thermal-sensors = <&thermal_sensor>;
@@ -346,17 +346,16 @@
 		reg = <0xe0 0x18>;
 	};
 
-	pinctrl_aobus: pinctrl@84 {
+	pinctrl_aobus: pinctrl@14 {
 		compatible = "amlogic,meson8-aobus-pinctrl";
-		reg = <0x84 0xc>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0x0 0x14 0x1c>;
 
-		gpio_ao: ao-bank@14 {
-			reg = <0x14 0x4>,
-			      <0x2c 0x4>,
-			      <0x24 0x8>;
+		gpio_ao: bank@0 {
+			reg = <0x0 0x4>,
+			      <0x18 0x4>,
+			      <0x10 0x8>;
 			reg-names = "mux", "pull", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -399,7 +398,7 @@
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -450,7 +449,11 @@
 	};
 
 	pwm_ef: pwm@86c0 {
-		compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+		compatible = "amlogic,meson8-pwm-v2";
+		clocks = <&xtal>,
+			 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+			 <&clkc CLKID_FCLK_DIV4>,
+			 <&clkc CLKID_FCLK_DIV3>;
 		reg = <0x86c0 0x10>;
 		#pwm-cells = <3>;
 		status = "disabled";
@@ -461,24 +464,31 @@
 		reg = <0x8758 0x1c>;
 	};
 
-	pinctrl_cbus: pinctrl@9880 {
+	pinctrl_cbus: pinctrl@8030 {
 		compatible = "amlogic,meson8-cbus-pinctrl";
-		reg = <0x9880 0x10>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0x0 0x8030 0x108>;
 
-		gpio: banks@80b0 {
-			reg = <0x80b0 0x28>,
-			      <0x80e8 0x18>,
-			      <0x8120 0x18>,
-			      <0x8030 0x30>;
+		gpio: bank@80 {
+			reg = <0x80 0x28>,
+			      <0xb8 0x18>,
+			      <0xf0 0x18>,
+			      <0x00 0x30>;
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&pinctrl_cbus 0 0 120>;
 		};
 
+		i2c_b_pins: i2c-b {
+			mux {
+				groups = "i2c_sda_b", "i2c_sck_b";
+				function = "i2c_b";
+				bias-disable;
+			};
+		};
+
 		sd_a_pins: sd-a {
 			mux {
 				groups = "sd_d0_a", "sd_d1_a", "sd_d2_a",
@@ -506,6 +516,15 @@
 			};
 		};
 
+		sdxc_a_pins: sdxc-a {
+			mux {
+				groups = "sdxc_d0_a", "sdxc_d13_a",
+					 "sdxc_clk_a", "sdxc_cmd_a";
+				function = "sdxc_a";
+				bias-pull-up;
+			};
+		};
+
 		sdxc_b_pins: sdxc-b {
 			mux {
 				groups = "sdxc_d0_b", "sdxc_d13_b",
@@ -515,6 +534,16 @@
 			};
 		};
 
+		sdxc_c_pins: sdxc-c {
+			mux {
+				groups = "sdxc_d0_c", "sdxc_d13_c",
+					"sdxc_clk_c", "sdxc_cmd_c",
+					"sdxc_d47_c";
+				function = "sdxc_c";
+				bias-pull-up;
+			};
+		};
+
 		spdif_out_pins: spdif-out {
 			mux {
 				groups = "spdif_out";
@@ -556,7 +585,7 @@
 				groups = "uart_tx_a1",
 				       "uart_rx_a1";
 				function = "uart_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -568,11 +597,19 @@
 				bias-disable;
 			};
 		};
+
+		xtal_32k_out_pins: xtal-32k-out {
+			mux {
+				groups = "xtal_32k_out";
+				function = "xtal";
+				bias-disable;
+			};
+		};
 	};
 };
 
 &ahb_sram {
-	ao_arc_sram: ao-arc-sram@0 {
+	ao_arc_sram: aoarc-sram@0 {
 		compatible = "amlogic,meson8-ao-arc-sram";
 		reg = <0x0 0x8000>;
 		pool;
@@ -628,7 +665,6 @@
 };
 
 &hwrng {
-	compatible = "amlogic,meson8-rng", "amlogic,meson-rng";
 	clocks = <&clkc CLKID_RNG0>;
 	clock-names = "core";
 };
@@ -651,6 +687,9 @@
 	arm,filter-ranges = <0x100000 0xc0000000>;
 	prefetch-data = <1>;
 	prefetch-instr = <1>;
+	arm,prefetch-offset = <7>;
+	arm,double-linefill = <1>;
+	arm,prefetch-drop = <1>;
 	arm,shared-override;
 };
 
@@ -682,11 +721,19 @@
 };
 
 &pwm_ab {
-	compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+	compatible = "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
 };
 
 &pwm_cd {
-	compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+	compatible = "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
 };
 
 &rtc {
@@ -749,13 +796,13 @@
 
 &uart_B {
 	compatible = "amlogic,meson8-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
 	compatible = "amlogic,meson8-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/amlogic/meson8b-ec100.dts
index 77d4beeb8010..236999548094 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/amlogic/meson8b-ec100.dts
@@ -22,7 +22,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
@@ -34,8 +34,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
 		pal-switch {
@@ -73,7 +71,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "ec100:red:power";
 			/*
 			 * Needs to go LOW (together with the poweroff GPIO)
@@ -100,6 +98,10 @@
 		compatible = "amlogic,gx-sound-card";
 		model = "M8B-EC100";
 
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -429,7 +431,7 @@
 			  "NAND_CS1 (EMMC)", "NAND_CS2 iNAND_RS1 (EMMC)",
 			  "NAND_nR/B iNAND_CMD (EMMC)", "NAND_ALE (EMMC)",
 			  "NAND_CLE (EMMC)", "nRE_S1 NAND_nRE (EMMC)",
-			  "nWE_S1 NAND_nWE (EMMC)",  "", "", "SPI_CS",
+			  "nWE_S1 NAND_nWE (EMMC)",  "", "", "", "SPI_CS",
 			  /* Bank DIF */
 			  "RMII_RXD1", "RMII_RXD0", "RMII_CRS_DV",
 			  "RMII_50M_IN", "GPIODIF_4", "GPIODIF_5",
@@ -441,8 +443,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>, <&xtal>;
-	clock-names = "clkin0", "clkin1";
 };
 
 &rtc {
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/amlogic/meson8b-mxq.dts
index 7adedd3258c3..0bca0b33eea2 100644
--- a/arch/arm/boot/dts/meson8b-mxq.dts
+++ b/arch/arm/boot/dts/amlogic/meson8b-mxq.dts
@@ -22,7 +22,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
@@ -162,8 +162,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>, <&xtal>;
-	clock-names = "clkin0", "clkin1";
 };
 
 &uart_AO {
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
index 04356bc639fa..1cd2093202ca 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
@@ -22,7 +22,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
@@ -34,7 +34,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		blue {
+		led-blue {
 			label = "c1:blue:alive";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
@@ -281,19 +281,6 @@
 			  "J7 Header Pin 6", "J7 Header Pin 5",
 			  "J7 Header Pin 7", "HDMI_CEC",
 			  "SYS_LED", "", "";
-
-	/*
-	 * WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller.
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	usb-hub {
-		gpio-hog;
-		gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
-	};
 };
 
 &ir_receiver {
@@ -360,8 +347,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>, <&xtal>;
-	clock-names = "clkin0", "clkin1";
 };
 
 &rtc {
@@ -381,5 +366,16 @@
 };
 
 &usb1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	hub@1 {
+		/* Genesys Logic GL852G usb hub */
+		compatible = "usb5e3,610";
+		reg = <1>;
+		vdd-supply = <&p5v0>;
+		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+	};
 };
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/amlogic/meson8b.dtsi
index cf9c04a61ba3..2d77b9876bf4 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson8b.dtsi
@@ -125,7 +125,7 @@
 		};
 	};
 
-	gpu_opp_table: gpu-opp-table {
+	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-255000000 {
@@ -173,7 +173,7 @@
 	};
 
 	thermal-zones {
-		soc {
+		soc-thermal {
 			polling-delay-passive = <250>; /* milliseconds */
 			polling-delay = <1000>; /* milliseconds */
 			thermal-sensors = <&thermal_sensor>;
@@ -308,17 +308,16 @@
 		reg = <0xe0 0x18>;
 	};
 
-	pinctrl_aobus: pinctrl@84 {
+	pinctrl_aobus: pinctrl@14 {
 		compatible = "amlogic,meson8b-aobus-pinctrl";
-		reg = <0x84 0xc>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0x0 0x14 0x1c>;
 
-		gpio_ao: ao-bank@14 {
-			reg = <0x14 0x4>,
-				<0x2c 0x4>,
-				<0x24 0x8>;
+		gpio_ao: bank@0 {
+			reg = <0x0 0x4>,
+			      <0x18 0x4>,
+			      <0x10 0x8>;
 			reg-names = "mux", "pull", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -369,7 +368,7 @@
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -404,8 +403,12 @@
 	};
 
 	pwm_ef: pwm@86c0 {
-		compatible = "amlogic,meson8b-pwm";
+		compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2";
 		reg = <0x86c0 0x10>;
+		clocks = <&xtal>,
+			 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+			 <&clkc CLKID_FCLK_DIV4>,
+			 <&clkc CLKID_FCLK_DIV3>;
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
@@ -415,18 +418,17 @@
 		reg = <0x8758 0x1c>;
 	};
 
-	pinctrl_cbus: pinctrl@9880 {
+	pinctrl_cbus: pinctrl@8030 {
 		compatible = "amlogic,meson8b-cbus-pinctrl";
-		reg = <0x9880 0x10>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0x0 0x8030 0x108>;
 
-		gpio: banks@80b0 {
-			reg = <0x80b0 0x28>,
-				<0x80e8 0x18>,
-				<0x8120 0x18>,
-				<0x8030 0x38>;
+		gpio: bank@80 {
+			reg = <0x80 0x28>,
+			      <0xb8 0x18>,
+			      <0xf0 0x18>,
+			      <0x00 0x38>;
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -519,7 +521,7 @@
 				groups = "uart_tx_b0",
 				       "uart_rx_b0";
 				function = "uart_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -535,7 +537,7 @@
 };
 
 &ahb_sram {
-	ao_arc_sram: ao-arc-sram@0 {
+	ao_arc_sram: aoarc-sram@0 {
 		compatible = "amlogic,meson8b-ao-arc-sram";
 		reg = <0x0 0x8000>;
 		pool;
@@ -580,8 +582,8 @@
 };
 
 &gpio_intc {
-	compatible = "amlogic,meson-gpio-intc",
-		     "amlogic,meson8b-gpio-intc";
+	compatible = "amlogic,meson8b-gpio-intc",
+		     "amlogic,meson-gpio-intc";
 	status = "okay";
 };
 
@@ -620,7 +622,6 @@
 };
 
 &hwrng {
-	compatible = "amlogic,meson8b-rng", "amlogic,meson-rng";
 	clocks = <&clkc CLKID_RNG0>;
 	clock-names = "core";
 };
@@ -643,6 +644,9 @@
 	arm,filter-ranges = <0x100000 0xc0000000>;
 	prefetch-data = <1>;
 	prefetch-instr = <1>;
+	arm,prefetch-offset = <7>;
+	arm,double-linefill = <1>;
+	arm,prefetch-drop = <1>;
 	arm,shared-override;
 };
 
@@ -674,11 +678,19 @@
 };
 
 &pwm_ab {
-	compatible = "amlogic,meson8b-pwm";
+	compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
 };
 
 &pwm_cd {
-	compatible = "amlogic,meson8b-pwm";
+	compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
 };
 
 &rtc {
@@ -737,13 +749,13 @@
 
 &uart_B {
 	compatible = "amlogic,meson8b-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
 	compatible = "amlogic,meson8b-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts
index fa6d55f1cfb9..08aa661e17ad 100644
--- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ b/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts
@@ -19,7 +19,6 @@
 		ethernet0 = &ethmac;
 		i2c0 = &i2c_AO;
 		serial0 = &uart_AO;
-		serial1 = &uart_A;
 		mmc0 = &sd_card_slot;
 	};
 
@@ -27,7 +26,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
@@ -45,12 +44,32 @@
 		};
 	};
 
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		pinctrl-0 = <&xtal_32k_out_pins>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>,
+			      <&gpio_ao GPIOAO_6 GPIO_ACTIVE_LOW>;
+
+		clocks = <&xtal_32k_out>;
+		clock-names = "ext_clock";
+	};
+
 	vcc_3v3: regulator-vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	xtal_32k_out: xtal-32k-out-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32k_out";
+	};
 };
 
 &cpu0 {
@@ -192,6 +211,27 @@
 	vref-supply = <&vddio_ao1v8>;
 };
 
+/* SDIO wifi */
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_a_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	max-frequency = <50000000>;
+
+	disable-wp;
+	non-removable;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
 &sdio {
 	status = "okay";
 
@@ -222,6 +262,12 @@
 	pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>;
 	pinctrl-names = "default";
 	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm20702a1";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+	};
 };
 
 &uart_AO {
diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/amlogic/meson8m2.dtsi
index 6725dd9fd825..6725dd9fd825 100644
--- a/arch/arm/boot/dts/meson8m2.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson8m2.dtsi
diff --git a/arch/arm/boot/dts/arm/Makefile b/arch/arm/boot/dts/arm/Makefile
new file mode 100644
index 000000000000..07ebb64e2cd0
--- /dev/null
+++ b/arch/arm/boot/dts/arm/Makefile
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_INTEGRATOR) += \
+	integratorap.dtb \
+	integratorap-im-pd1.dtb \
+	integratorcp.dtb
+dtb-$(CONFIG_ARCH_MPS2) += \
+	mps2-an385.dtb \
+	mps2-an399.dtb
+dtb-$(CONFIG_ARCH_REALVIEW) += \
+	arm-realview-pb1176.dtb \
+	arm-realview-pb11mp.dtb \
+	arm-realview-eb.dtb \
+	arm-realview-eb-bbrevd.dtb \
+	arm-realview-eb-11mp.dtb \
+	arm-realview-eb-11mp-bbrevd.dtb \
+	arm-realview-eb-11mp-ctrevb.dtb \
+	arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
+	arm-realview-eb-a9mp.dtb \
+	arm-realview-eb-a9mp-bbrevd.dtb \
+	arm-realview-pba8.dtb \
+	arm-realview-pbx-a9.dtb
+dtb-$(CONFIG_ARCH_VERSATILE) += \
+	versatile-ab.dtb \
+	versatile-ab-ib2.dtb \
+	versatile-pb.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += \
+	vexpress-v2p-ca5s.dtb \
+	vexpress-v2p-ca9.dtb \
+	vexpress-v2p-ca15-tc1.dtb \
+	vexpress-v2p-ca15_a7.dtb
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd-ctrevb.dts
index e18769df9fd9..e18769df9fd9 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd-ctrevb.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd.dts
index 26b1c69e9f43..26b1c69e9f43 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-ctrevb.dts
index e68527b0d552..e68527b0d552 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-ctrevb.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp.dts
index aac1edd4b227..aac1edd4b227 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp-bbrevd.dts
index 42efac7496ef..42efac7496ef 100644
--- a/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp-bbrevd.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp.dts b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp.dts
index 967684b3636c..967684b3636c 100644
--- a/arch/arm/boot/dts/arm-realview-eb-a9mp.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dts
index f533c8b49d97..f533c8b49d97 100644
--- a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi
index a79e1d1d30a7..7f62aef9ca8a 100644
--- a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi
@@ -22,7 +22,7 @@
 
 / {
 	/* Introduce a fixed regulator for the new ethernet controller */
-	veth: fixedregulator@0 {
+	veth: regulator-veth {
 		compatible = "regulator-fixed";
 		regulator-name = "veth";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi
index 26783d053ac7..40f7515aa068 100644
--- a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi
@@ -103,7 +103,7 @@
 		};
 
 		/* PMU with one IRQ line per core */
-		pmu: pmu@0 {
+		pmu: pmu {
 			compatible = "arm,arm11mpcore-pmu";
 			interrupt-parent = <&intc>;
 			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/arm-realview-eb.dts b/arch/arm/boot/dts/arm/arm-realview-eb.dts
index 15431077f00c..15431077f00c 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
index 2dfb32bf9d48..16f784da5a55 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
@@ -45,7 +45,7 @@
 	};
 
 	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: fixedregulator@0 {
+	vmmc: regulator-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
@@ -53,13 +53,13 @@
 		regulator-boot-on;
         };
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -67,48 +67,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -399,7 +359,7 @@
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		wdog: watchdog@10010000 {
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
index 06b8723b09eb..b9b10cbd65aa 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
@@ -63,13 +63,13 @@
 		regulator-boot-on;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -77,40 +77,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -410,7 +378,7 @@
 			interrupt-parent = <&intc_dc1176>;
 			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		pb1176_serial0: serial@1010c000 {
@@ -451,7 +419,7 @@
 
 		/* Direct-mapped development chip ROM */
 		pb1176_rom@10200000 {
-			compatible = "direct-mapped";
+			compatible = "mtd-rom";
 			reg = <0x10200000 0x4000>;
 			bank-width = <1>;
 		};
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
index 295aef448123..db1b6793cd2c 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
@@ -92,7 +92,7 @@
 		      <0x1f000100 0x100>;
 	};
 
-	L2: cache-controller {
+	L2: cache-controller@1f002000 {
 		compatible = "arm,l220-cache";
 		reg = <0x1f002000 0x1000>;
 		interrupt-parent = <&intc_tc11mp>;
@@ -163,19 +163,19 @@
 		regulator-boot-on;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	refclk32khz: refclk32khz {
+	refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -183,48 +183,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -555,7 +515,7 @@
 			interrupt-parent = <&intc_pb11mp>;
 			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		watchdog@1000f000 {
diff --git a/arch/arm/boot/dts/arm-realview-pba8.dts b/arch/arm/boot/dts/arm/arm-realview-pba8.dts
index d3238c252b59..d2e0082245f9 100644
--- a/arch/arm/boot/dts/arm-realview-pba8.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pba8.dts
@@ -40,7 +40,7 @@
 		};
 	};
 
-	pmu: pmu@0 {
+	pmu: pmu {
 		compatible = "arm,cortex-a8-pmu";
 		interrupt-parent = <&intc>;
 		interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts
index 85d3968fbb91..507ad7ac4974 100644
--- a/arch/arm/boot/dts/arm-realview-pbx-a9.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts
@@ -97,7 +97,7 @@
 		interrupts = <1 14 0xf04>;
 	};
 
-	pmu: pmu@0 {
+	pmu: pmu {
 		compatible = "arm,cortex-a9-pmu";
 		interrupt-parent = <&intc>;
 		interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
index 6f61f968d689..e625403a9456 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
@@ -62,19 +62,19 @@
 		regulator-boot-on;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	refclk32khz: refclk32khz {
+	refclk32khz: clock-32768 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -82,48 +82,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -390,7 +350,7 @@
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		wdog0: watchdog@1000f000 {
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/arm/integrator.dtsi
index ad868cfebc94..7f1c8ee9dd8a 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/arm/integrator.dtsi
@@ -88,12 +88,12 @@
 			interrupts = <8>;
 		};
 
-		uart@16000000 {
+		serial@16000000 {
 			reg = <0x16000000 0x1000>;
 			interrupts = <1>;
 		};
 
-		uart@17000000 {
+		serial@17000000 {
 			reg = <0x17000000 0x1000>;
 			interrupts = <2>;
 		};
diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
index d47bfb66d069..db13e09f2fab 100644
--- a/arch/arm/boot/dts/integratorap-im-pd1.dts
+++ b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
@@ -54,7 +54,7 @@
 	};
 
 	/* Also used for the Smart Card Interface SCI */
-	impd1_uartclk: clock@1_4 {
+	impd1_uartclk: clock-uart {
 		compatible = "fixed-factor-clock";
 		#clock-cells = <0>;
 		clock-div = <4>;
@@ -64,7 +64,7 @@
 	};
 
 	/* For the SSP the clock is divided by 64 */
-	impd1_sspclk: clock@1_64 {
+	impd1_sspclk: clock-ssp {
 		compatible = "fixed-factor-clock";
 		#clock-cells = <0>;
 		clock-div = <64>;
@@ -129,8 +129,6 @@
 
 	bridge {
 		compatible = "ti,ths8134b", "ti,ths8134";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		ports {
 			#address-cells = <1>;
@@ -154,6 +152,7 @@
 
 	vga {
 		compatible = "vga-connector";
+		label = "J30";
 
 		port {
 			vga_con_in: endpoint {
@@ -162,7 +161,7 @@
 		};
 	};
 
-	uart@100000 {
+	serial@100000 {
 		compatible = "arm,pl011", "arm,primecell";
 		reg = <0x00100000 0x1000>;
 		interrupts-extended = <&impd1_vic 1>;
@@ -170,7 +169,7 @@
 		clock-names = "uartclk", "apb_pclk";
 	};
 
-	uart@200000 {
+	serial@200000 {
 		compatible = "arm,pl011", "arm,primecell";
 		reg = <0x00200000 0x1000>;
 		interrupts-extended = <&impd1_vic 2>;
@@ -178,12 +177,12 @@
 		clock-names = "uartclk", "apb_pclk";
 	};
 
-	ssp@300000 {
+	spi@300000 {
 		compatible = "arm,pl022", "arm,primecell";
 		reg = <0x00300000 0x1000>;
 		interrupts-extended = <&impd1_vic 3>;
 		clocks = <&impd1_sspclk>, <&sysclk>;
-		clock-names = "spiclk", "apb_pclk";
+		clock-names = "sspclk", "apb_pclk";
 	};
 
 	impd1_gpio0: gpio@400000 {
@@ -249,6 +248,7 @@
 		/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
 		max-memory-bandwidth = <40000000>;
 		memory-region = <&impd1_ram>;
+		dma-ranges;
 
 		port@0 {
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/arm/integratorap.dts
index 9b652cc27b14..9b6a1dbaf265 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/arm/integratorap.dts
@@ -57,22 +57,14 @@
 	};
 
 	/* 24 MHz chrystal on the Integrator/AP development board */
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: pclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	pclk: pclk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* The UART clock is 14.74 MHz divided by an ICS525 */
-	uartclk: uartclk@14.74M {
+	uartclk: clock-14745600 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <14745600>;
@@ -81,7 +73,7 @@
 
 	core-module@10000000 {
 		/* 24 MHz chrystal on the core module */
-		cm24mhz: cm24mhz@24M {
+		cm24mhz: clock-24000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -158,8 +150,9 @@
 		valid-mask = <0x003fffff>;
 	};
 
-	pci: pciv3@62000000 {
+	pci: pci@62000000 {
 		compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
+		device_type = "pci";
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
@@ -217,14 +210,14 @@
 			clock-names = "apb_pclk";
 		};
 
-		uart0: uart@16000000 {
+		uart0: serial@16000000 {
 			compatible = "arm,pl010", "arm,primecell";
 			arm,primecell-periphid = <0x00041010>;
 			clocks = <&uartclk>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart1: uart@17000000 {
+		uart1: serial@17000000 {
 			compatible = "arm,pl010", "arm,primecell";
 			arm,primecell-periphid = <0x00041010>;
 			clocks = <&uartclk>, <&pclk>;
@@ -261,7 +254,7 @@
 		lm0: bus@c0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xc0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xc0000000 0x10000000>;
 			reg = <0xc0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -269,7 +262,7 @@
 		lm1: bus@d0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xd0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xd0000000 0x10000000>;
 			reg = <0xd0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -277,7 +270,7 @@
 		lm2: bus@e0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xe0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xe0000000 0x10000000>;
 			reg = <0xe0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -285,7 +278,7 @@
 		lm3: bus@f0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xf0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xf0000000 0x10000000>;
 			reg = <0xf0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/arm/integratorcp.dts
index 38fc7e81bdb6..8ad1a8957ace 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/arm/integratorcp.dts
@@ -47,14 +47,14 @@
 	 */
 
 	/* The codec chrystal operates at 24.576 MHz */
-	xtal_codec: xtal24.576@24.576M {
+	xtal_codec: clock-24576000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24576000>;
 	};
 
 	/* The chrystal is divided by 2 by the codec for the AACI bit clock */
-	aaci_bitclk: aaci_bitclk@12.288M {
+	aaci_bitclk: clock-12288000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <2>;
@@ -63,21 +63,21 @@
 	};
 
 	/* This is a 25MHz chrystal on the base board */
-	xtal25mhz: xtal25mhz@25M {
+	xtal25mhz: clock-25000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <25000000>;
 	};
 
 	/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
-	uartclk: uartclk@14.74M {
+	uartclk: clock-14745600 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <14745600>;
 	};
 
 	/* Actually sysclk I think */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -85,7 +85,7 @@
 
 	core-module@10000000 {
 		/* 24 MHz chrystal on the core module */
-		cm24mhz: cm24mhz@24M {
+		cm24mhz: clock-24000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -131,7 +131,7 @@
 		};
 
 		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
-		timclk: timclk@1M {
+		timclk: clock-1000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <24>;
@@ -244,13 +244,13 @@
 			clock-names = "apb_pclk";
 		};
 
-		uart@16000000 {
+		serial@16000000 {
 			compatible = "arm,pl011", "arm,primecell";
 			clocks = <&uartclk>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart@17000000 {
+		serial@17000000 {
 			compatible = "arm,pl011", "arm,primecell";
 			clocks = <&uartclk>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
diff --git a/arch/arm/boot/dts/mps2-an385.dts b/arch/arm/boot/dts/arm/mps2-an385.dts
index aebbebfc25d1..aebbebfc25d1 100644
--- a/arch/arm/boot/dts/mps2-an385.dts
+++ b/arch/arm/boot/dts/arm/mps2-an385.dts
diff --git a/arch/arm/boot/dts/mps2-an399.dts b/arch/arm/boot/dts/arm/mps2-an399.dts
index 349abf70b2a5..349abf70b2a5 100644
--- a/arch/arm/boot/dts/mps2-an399.dts
+++ b/arch/arm/boot/dts/arm/mps2-an399.dts
diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/arm/mps2.dtsi
index b99577d411b1..e240bc8aa605 100644
--- a/arch/arm/boot/dts/mps2.dtsi
+++ b/arch/arm/boot/dts/arm/mps2.dtsi
@@ -42,43 +42,43 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "armv7-m.dtsi"
+#include "../armv7-m.dtsi"
 
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	oscclk0: clk-osc0 {
+	oscclk0: clock-50000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 	};
 
-	oscclk1: clk-osc1 {
+	oscclk1: clock-24576000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24576000>;
 	};
 
-	oscclk2: clk-osc2 {
+	oscclk2: clock-25000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
-	cfgclk: clk-cfg {
+	cfgclk: clock-5000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <5000000>;
 	};
 
-	spicfgclk: clk-spicfg {
+	spicfgclk: clock-75000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <75000000>;
 	};
 
-	sysclk: clk-sys {
+	sysclk: spiclcd: spicon: i2cclcd: i2caud: clock-sys {
 		compatible = "fixed-factor-clock";
 		clocks = <&oscclk0>;
 		#clock-cells = <0>;
@@ -86,7 +86,7 @@
 		clock-mult = <1>;
 	};
 
-	audmclk: clk-audm {
+	audmclk: clk-12388000 {
 		compatible = "fixed-factor-clock";
 		clocks = <&oscclk1>;
 		#clock-cells = <0>;
@@ -94,7 +94,7 @@
 		clock-mult = <1>;
 	};
 
-	audsclk: clk-auds {
+	audsclk: clk-3072000 {
 		compatible = "fixed-factor-clock";
 		clocks = <&oscclk1>;
 		#clock-cells = <0>;
@@ -102,38 +102,6 @@
 		clock-mult = <1>;
 	};
 
-	spiclcd: clk-cpiclcd {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	spicon: clk-spicon {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	i2cclcd: clk-i2cclcd {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	i2caud: clk-i2caud {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
 	soc {
 		compatible = "simple-bus";
 		ranges;
diff --git a/arch/arm/boot/dts/versatile-ab-ib2.dts b/arch/arm/boot/dts/arm/versatile-ab-ib2.dts
index 7ebb0dfd0467..7ebb0dfd0467 100644
--- a/arch/arm/boot/dts/versatile-ab-ib2.dts
+++ b/arch/arm/boot/dts/arm/versatile-ab-ib2.dts
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/arm/versatile-ab.dts
index 79f7cc241282..635ab9268899 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/arm/versatile-ab.dts
@@ -24,7 +24,7 @@
 		reg = <0x0 0x08000000>;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
@@ -32,8 +32,6 @@
 
 	bridge {
 		compatible = "ti,ths8134b", "ti,ths8134";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		ports {
 			#address-cells = <1>;
@@ -59,6 +57,7 @@
 
 	vga {
 		compatible = "vga-connector";
+		label = "J1";
 
 		port {
 			vga_con_in: endpoint {
@@ -143,14 +142,14 @@
 		};
 
 		/* OSC1 on AB, OSC4 on PB */
-		osc1: cm_aux_osc@24M {
+		osc1: clock-osc {
 			#clock-cells = <0>;
 			compatible = "arm,versatile-cm-auxosc";
 			clocks = <&xtal24mhz>;
 		};
 
 		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
-		timclk: timclk@1M {
+		timclk: clock-1000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <24>;
@@ -158,7 +157,7 @@
 			clocks = <&xtal24mhz>;
 		};
 
-		pclk: pclk@24M {
+		pclk: clock-pclk {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <1>;
@@ -237,7 +236,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		uart0: uart@101f1000 {
+		uart0: serial@101f1000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101f1000 0x1000>;
 			interrupts = <12>;
@@ -245,7 +244,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart1: uart@101f2000 {
+		uart1: serial@101f2000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101f2000 0x1000>;
 			interrupts = <13>;
@@ -253,7 +252,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart2: uart@101f3000 {
+		uart2: serial@101f3000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101f3000 0x1000>;
 			interrupts = <14>;
@@ -391,7 +390,7 @@
 			reg = <0x101f4000 0x1000>;
 			interrupts = <11>;
 			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		fpga {
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/arm/versatile-pb.dts
index e7e751a858d8..fc21ce54b33a 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/arm/versatile-pb.dts
@@ -85,7 +85,7 @@
 				 */
 				interrupts-extended = <&sic 22 &sic 23>;
 			};
-			uart@9000 {
+			serial@9000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x9000 0x1000>;
 				interrupt-parent = <&sic>;
diff --git a/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi
new file mode 100644
index 000000000000..158b3923eae3
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * original variant (vexpress-v2m.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m.dtsi!
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	v2m_fixed_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	v2m_clk24mhz: clock-24000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "v2m:clk24mhz";
+	};
+
+	v2m_refclk1mhz: clock-1000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+		clock-output-names = "v2m:refclk1mhz";
+	};
+
+	v2m_refclk32khz: clock-32768 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "v2m:refclk32khz";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			label = "v2m:green:user1";
+			gpios = <&v2m_led_gpios 0 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			label = "v2m:green:user2";
+			gpios = <&v2m_led_gpios 1 0>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		led-3 {
+			label = "v2m:green:user3";
+			gpios = <&v2m_led_gpios 2 0>;
+			linux,default-trigger = "cpu0";
+		};
+
+		led-4 {
+			label = "v2m:green:user4";
+			gpios = <&v2m_led_gpios 3 0>;
+			linux,default-trigger = "cpu1";
+		};
+
+		led-5 {
+			label = "v2m:green:user5";
+			gpios = <&v2m_led_gpios 4 0>;
+			linux,default-trigger = "cpu2";
+		};
+
+		led-6 {
+			label = "v2m:green:user6";
+			gpios = <&v2m_led_gpios 5 0>;
+			linux,default-trigger = "cpu3";
+		};
+
+		led-7 {
+			label = "v2m:green:user7";
+			gpios = <&v2m_led_gpios 6 0>;
+			linux,default-trigger = "cpu4";
+		};
+
+		led-8 {
+			label = "v2m:green:user8";
+			gpios = <&v2m_led_gpios 7 0>;
+			linux,default-trigger = "cpu5";
+		};
+	};
+
+	bus@8000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 63>;
+		interrupt-map = <0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		motherboard-bus@8000000 {
+			arm,hbi = <0x190>;
+			arm,vexpress,site = <0>;
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			ranges = <0 0 0x08000000 0x04000000>,
+				 <1 0 0x14000000 0x04000000>,
+				 <2 0 0x18000000 0x04000000>,
+				 <3 0 0x1c000000 0x04000000>,
+				 <4 0 0x0c000000 0x04000000>,
+				 <5 0 0x10000000 0x04000000>;
+
+			nor_flash: flash@0 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <4 0x00000000 0x04000000>;
+				bank-width = <4>;
+				partitions {
+					compatible = "arm,arm-firmware-suite";
+				};
+			};
+
+			psram@100000000 {
+				compatible = "arm,vexpress-psram", "mtd-ram";
+				reg = <1 0x00000000 0x02000000>;
+				bank-width = <4>;
+			};
+
+			ethernet@202000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <2 0x02000000 0x10000>;
+				interrupts = <15>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				vdd33a-supply = <&v2m_fixed_3v3>;
+				vddvario-supply = <&v2m_fixed_3v3>;
+			};
+
+			usb@203000000 {
+				compatible = "nxp,usb-isp1761";
+				reg = <2 0x03000000 0x20000>;
+				interrupts = <16>;
+				dr_mode = "peripheral";
+			};
+
+			iofpga-bus@300000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 3 0 0x200000>;
+
+				v2m_sysreg: sysreg@10000 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x010000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x10000 0x1000>;
+
+					v2m_led_gpios: gpio@8 {
+						compatible = "arm,vexpress-sysreg,sys_led";
+						reg = <0x008 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_mmc_gpios: gpio@48 {
+						compatible = "arm,vexpress-sysreg,sys_mci";
+						reg = <0x048 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_flash_gpios: gpio@4c {
+						compatible = "arm,vexpress-sysreg,sys_flash";
+						reg = <0x04c 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+				};
+
+				v2m_sysctl: sysctl@20000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x020000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				/* PCI-E I2C bus */
+				v2m_i2c_pcie: i2c@30000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x030000 0x1000>;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pcie-switch@60 {
+						compatible = "idt,89hpes32h8";
+						reg = <0x60>;
+					};
+				};
+
+				aaci@40000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x040000 0x1000>;
+					interrupts = <11>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				mmc@50000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x050000 0x1000>;
+					interrupts = <9>, <10>;
+					cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@60000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x060000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@70000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x070000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				v2m_serial0: serial@90000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x090000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial1: serial@a0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a0000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial2: serial@b0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b0000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial3: serial@c0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c0000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				watchdog@f0000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f0000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&smbclk>;
+					clock-names = "wdog_clk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@110000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x110000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@120000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x120000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				/* DVI I2C bus */
+				v2m_i2c_dvi: i2c@160000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x160000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dvi-transmitter@39 {
+						compatible = "sil,sii9022-tpi", "sil,sii9022";
+						reg = <0x39>;
+
+						ports {
+							#address-cells = <1>;
+							#size-cells = <0>;
+
+							port@0 {
+								reg = <0>;
+								dvi_bridge_in: endpoint {
+									remote-endpoint = <&clcd_pads>;
+								};
+							};
+						};
+					};
+
+					dvi-transmitter@60 {
+						compatible = "sil,sii9022-cpi", "sil,sii9022";
+						reg = <0x60>;
+					};
+				};
+
+				rtc@170000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x170000 0x1000>;
+					interrupts = <4>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				compact-flash@1a0000 {
+					compatible = "arm,vexpress-cf", "ata-generic";
+					reg = <0x1a0000 0x100
+					       0x1a0100 0xf00>;
+					reg-shift = <2>;
+				};
+
+				clcd@1f0000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f0000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&smbclk>;
+					clock-names = "clcdclk", "apb_pclk";
+					/* 800x600 16bpp @36MHz works fine */
+					max-memory-bandwidth = <54000000>;
+					memory-region = <&vram>;
+
+					port {
+						clcd_pads: endpoint {
+							remote-endpoint = <&dvi_bridge_in>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+						};
+					};
+				};
+
+				mcc {
+					compatible = "arm,vexpress,config-bus";
+					arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+					oscclk0 {
+						/* MCC static memory clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 0>;
+						freq-range = <25000000 60000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk0";
+					};
+
+					v2m_oscclk1: oscclk1 {
+						/* CLCD clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 1>;
+						freq-range = <23750000 65000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk1";
+					};
+
+					v2m_oscclk2: oscclk2 {
+						/* IO FPGA peripheral clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 2>;
+						freq-range = <24000000 24000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk2";
+					};
+
+					volt-vio {
+						/* Logic level voltage */
+						compatible = "arm,vexpress-volt";
+						arm,vexpress-sysreg,func = <2 0>;
+						regulator-name = "VIO";
+						regulator-always-on;
+						label = "VIO";
+					};
+
+					temp-mcc {
+						/* MCC internal operating temperature */
+						compatible = "arm,vexpress-temp";
+						arm,vexpress-sysreg,func = <4 0>;
+						label = "MCC";
+					};
+
+					reset {
+						compatible = "arm,vexpress-reset";
+						arm,vexpress-sysreg,func = <5 0>;
+					};
+
+					muxfpga {
+						compatible = "arm,vexpress-muxfpga";
+						arm,vexpress-sysreg,func = <7 0>;
+					};
+
+					shutdown {
+						compatible = "arm,vexpress-shutdown";
+						arm,vexpress-sysreg,func = <8 0>;
+					};
+
+					reboot {
+						compatible = "arm,vexpress-reboot";
+						arm,vexpress-sysreg,func = <9 0>;
+					};
+
+					dvimode {
+						compatible = "arm,vexpress-dvimode";
+						arm,vexpress-sysreg,func = <11 0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi
index f434fe5cf4a1..be03f2a8a57a 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi
@@ -216,7 +216,7 @@
 					clock-names = "KMIREFCLK", "apb_pclk";
 				};
 
-				v2m_serial0: uart@9000 {
+				v2m_serial0: serial@9000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x09000 0x1000>;
 					interrupts = <5>;
@@ -224,7 +224,7 @@
 					clock-names = "uartclk", "apb_pclk";
 				};
 
-				v2m_serial1: uart@a000 {
+				v2m_serial1: serial@a000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x0a000 0x1000>;
 					interrupts = <6>;
@@ -232,7 +232,7 @@
 					clock-names = "uartclk", "apb_pclk";
 				};
 
-				v2m_serial2: uart@b000 {
+				v2m_serial2: serial@b000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x0b000 0x1000>;
 					interrupts = <7>;
@@ -240,7 +240,7 @@
 					clock-names = "uartclk", "apb_pclk";
 				};
 
-				v2m_serial3: uart@c000 {
+				v2m_serial3: serial@c000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x0c000 0x1000>;
 					interrupts = <8>;
@@ -351,7 +351,7 @@
 				};
 			};
 
-			v2m_fixed_3v3: fixed-regulator-0 {
+			v2m_fixed_3v3: regulator-3v3 {
 				compatible = "regulator-fixed";
 				regulator-name = "3V3";
 				regulator-min-microvolt = <3300000>;
@@ -359,21 +359,21 @@
 				regulator-always-on;
 			};
 
-			v2m_clk24mhz: clk24mhz {
+			v2m_clk24mhz: clock-24000000 {
 				compatible = "fixed-clock";
 				#clock-cells = <0>;
 				clock-frequency = <24000000>;
 				clock-output-names = "v2m:clk24mhz";
 			};
 
-			v2m_refclk1mhz: refclk1mhz {
+			v2m_refclk1mhz: clock-1000000 {
 				compatible = "fixed-clock";
 				#clock-cells = <0>;
 				clock-frequency = <1000000>;
 				clock-output-names = "v2m:refclk1mhz";
 			};
 
-			v2m_refclk32khz: refclk32khz {
+			v2m_refclk32khz: clock-32768 {
 				compatible = "fixed-clock";
 				#clock-cells = <0>;
 				clock-frequency = <32768>;
@@ -383,49 +383,49 @@
 			leds {
 				compatible = "gpio-leds";
 
-				user1 {
+				led-user1 {
 					label = "v2m:green:user1";
 					gpios = <&v2m_led_gpios 0 0>;
 					linux,default-trigger = "heartbeat";
 				};
 
-				user2 {
+				led-user2 {
 					label = "v2m:green:user2";
 					gpios = <&v2m_led_gpios 1 0>;
 					linux,default-trigger = "mmc0";
 				};
 
-				user3 {
+				led-user3 {
 					label = "v2m:green:user3";
 					gpios = <&v2m_led_gpios 2 0>;
 					linux,default-trigger = "cpu0";
 				};
 
-				user4 {
+				led-user4 {
 					label = "v2m:green:user4";
 					gpios = <&v2m_led_gpios 3 0>;
 					linux,default-trigger = "cpu1";
 				};
 
-				user5 {
+				led-user5 {
 					label = "v2m:green:user5";
 					gpios = <&v2m_led_gpios 4 0>;
 					linux,default-trigger = "cpu2";
 				};
 
-				user6 {
+				led-user6 {
 					label = "v2m:green:user6";
 					gpios = <&v2m_led_gpios 5 0>;
 					linux,default-trigger = "cpu3";
 				};
 
-				user7 {
+				led-user7 {
 					label = "v2m:green:user7";
 					gpios = <&v2m_led_gpios 6 0>;
 					linux,default-trigger = "cpu4";
 				};
 
-				user8 {
+				led-user8 {
 					label = "v2m:green:user8";
 					gpios = <&v2m_led_gpios 7 0>;
 					linux,default-trigger = "cpu5";
@@ -436,7 +436,7 @@
 				compatible = "arm,vexpress,config-bus";
 				arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-				oscclk0 {
+				clock-controller-0 {
 					/* MCC static memory clock */
 					compatible = "arm,vexpress-osc";
 					arm,vexpress-sysreg,func = <1 0>;
@@ -445,7 +445,7 @@
 					clock-output-names = "v2m:oscclk0";
 				};
 
-				v2m_oscclk1: oscclk1 {
+				v2m_oscclk1: clock-controller-1 {
 					/* CLCD clock */
 					compatible = "arm,vexpress-osc";
 					arm,vexpress-sysreg,func = <1 1>;
@@ -454,7 +454,7 @@
 					clock-output-names = "v2m:oscclk1";
 				};
 
-				v2m_oscclk2: oscclk2 {
+				v2m_oscclk2: clock-controller-2 {
 					/* IO FPGA peripheral clock */
 					compatible = "arm,vexpress-osc";
 					arm,vexpress-sysreg,func = <1 2>;
@@ -463,7 +463,7 @@
 					clock-output-names = "v2m:oscclk2";
 				};
 
-				volt-vio {
+				regulator-vio {
 					/* Logic level voltage */
 					compatible = "arm,vexpress-volt";
 					arm,vexpress-sysreg,func = <2 0>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts
index 679537e17ff5..5a91e936edef 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts
@@ -142,7 +142,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		oscclk0 {
+		clock-controller-0 {
 			/* CPU PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -151,7 +151,7 @@
 			clock-output-names = "oscclk0";
 		};
 
-		oscclk4 {
+		clock-controller-4 {
 			/* Multiplexed AXI master clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -160,7 +160,7 @@
 			clock-output-names = "oscclk4";
 		};
 
-		hdlcd_clk: oscclk5 {
+		hdlcd_clk: clock-controller-5 {
 			/* HDLCD PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 5>;
@@ -169,7 +169,7 @@
 			clock-output-names = "oscclk5";
 		};
 
-		smbclk: oscclk6 {
+		smbclk: clock-controller-6 {
 			/* SMB clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 6>;
@@ -178,7 +178,7 @@
 			clock-output-names = "oscclk6";
 		};
 
-		sys_pll: oscclk7 {
+		sys_pll: clock-controller-7 {
 			/* SYS PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 7>;
@@ -187,7 +187,7 @@
 			clock-output-names = "oscclk7";
 		};
 
-		oscclk8 {
+		clock-controller-8 {
 			/* DDR2 PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 8>;
@@ -196,7 +196,7 @@
 			clock-output-names = "oscclk8";
 		};
 
-		volt-cores {
+		regulator-cores {
 			/* CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts
index 511e87cc2bc5..6ef23c53d2d8 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts
@@ -253,7 +253,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		oscclk0 {
+		clock-controller-0 {
 			/* A15 PLL 0 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -262,7 +262,7 @@
 			clock-output-names = "oscclk0";
 		};
 
-		oscclk1 {
+		clock-controller-1 {
 			/* A15 PLL 1 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
@@ -271,7 +271,7 @@
 			clock-output-names = "oscclk1";
 		};
 
-		oscclk2 {
+		clock-controller-2 {
 			/* A7 PLL 0 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 2>;
@@ -280,7 +280,7 @@
 			clock-output-names = "oscclk2";
 		};
 
-		oscclk3 {
+		clock-controller-3 {
 			/* A7 PLL 1 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 3>;
@@ -289,7 +289,7 @@
 			clock-output-names = "oscclk3";
 		};
 
-		oscclk4 {
+		clock-controller-4 {
 			/* External AXI master clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -298,7 +298,7 @@
 			clock-output-names = "oscclk4";
 		};
 
-		hdlcd_clk: oscclk5 {
+		hdlcd_clk: clock-controller-5 {
 			/* HDLCD PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 5>;
@@ -307,7 +307,7 @@
 			clock-output-names = "oscclk5";
 		};
 
-		smbclk: oscclk6 {
+		smbclk: clock-controller-6 {
 			/* Static memory controller clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 6>;
@@ -316,7 +316,7 @@
 			clock-output-names = "oscclk6";
 		};
 
-		oscclk7 {
+		clock-controller-7 {
 			/* SYS PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 7>;
@@ -325,7 +325,7 @@
 			clock-output-names = "oscclk7";
 		};
 
-		oscclk8 {
+		clock-controller-8 {
 			/* DDR2 PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 8>;
@@ -334,7 +334,7 @@
 			clock-output-names = "oscclk8";
 		};
 
-		volt-a15 {
+		regulator-a15 {
 			/* A15 CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
@@ -345,7 +345,7 @@
 			label = "A15 Vcore";
 		};
 
-		volt-a7 {
+		regulator-a7 {
 			/* A7 CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 1>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts
index 3b88209bacea..e3896253f33e 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts
@@ -132,6 +132,7 @@
 		reg = <0x2c0f0000 0x1000>;
 		interrupts = <0 84 4>;
 		cache-level = <2>;
+		cache-unified;
 	};
 
 	pmu {
@@ -144,7 +145,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		cpu_clk: oscclk0 {
+		cpu_clk: clock-controller-0 {
 			/* CPU and internal AXI reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -153,7 +154,7 @@
 			clock-output-names = "oscclk0";
 		};
 
-		axi_clk: oscclk1 {
+		axi_clk: clock-controller-1 {
 			/* Multiplexed AXI master clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
@@ -162,7 +163,7 @@
 			clock-output-names = "oscclk1";
 		};
 
-		oscclk2 {
+		clock-controller-2 {
 			/* DDR2 */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 2>;
@@ -171,7 +172,7 @@
 			clock-output-names = "oscclk2";
 		};
 
-		hdlcd_clk: oscclk3 {
+		hdlcd_clk: clock-controller-3 {
 			/* HDLCD */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 3>;
@@ -180,7 +181,7 @@
 			clock-output-names = "oscclk3";
 		};
 
-		oscclk4 {
+		clock-controller-4 {
 			/* Test chip gate configuration */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -189,7 +190,7 @@
 			clock-output-names = "oscclk4";
 		};
 
-		smbclk: oscclk5 {
+		smbclk: clock-controller-5 {
 			/* SMB clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 5>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts
index 5916e4877eac..43a5a4ab6ff0 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts
@@ -20,7 +20,9 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	chosen { };
+	chosen {
+		stdout-path = &v2m_serial0;
+	};
 
 	aliases {
 		serial0 = &v2m_serial0;
@@ -185,7 +187,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		oscclk0: extsaxiclk {
+		oscclk0: clock-controller-0 {
 			/* ACLK clock to the AXI master port on the test chip */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -194,7 +196,7 @@
 			clock-output-names = "extsaxiclk";
 		};
 
-		oscclk1: clcdclk {
+		oscclk1: clock-controller-1 {
 			/* Reference clock for the CLCD */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
@@ -203,7 +205,7 @@
 			clock-output-names = "clcdclk";
 		};
 
-		smbclk: oscclk2: tcrefclk {
+		smbclk: oscclk2: clock-controller-2 {
 			/* Reference clock for the test chip internal PLLs */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 2>;
@@ -212,7 +214,7 @@
 			clock-output-names = "tcrefclk";
 		};
 
-		volt-vd10 {
+		regulator-vd10 {
 			/* Test Chip internal logic voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
@@ -221,7 +223,7 @@
 			label = "VD10";
 		};
 
-		volt-vd10-s2 {
+		regulator-vd10-s2 {
 			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 1>;
@@ -230,7 +232,7 @@
 			label = "VD10_S2";
 		};
 
-		volt-vd10-s3 {
+		regulator-vd10-s3 {
 			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 2>;
@@ -239,7 +241,7 @@
 			label = "VD10_S3";
 		};
 
-		volt-vcc1v8 {
+		regulator-vcc1v8 {
 			/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 3>;
@@ -248,7 +250,7 @@
 			label = "VCC1V8";
 		};
 
-		volt-ddr2vtt {
+		regulator-ddr2vtt {
 			/* DDR2 SDRAM VTT termination voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 4>;
@@ -257,7 +259,7 @@
 			label = "DDR2VTT";
 		};
 
-		volt-vcc3v3 {
+		regulator-vcc3v3 {
 			/* Local board supply for miscellaneous logic external to the Test Chip */
 			arm,vexpress-sysreg,func = <2 5>;
 			compatible = "arm,vexpress-volt";
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
deleted file mode 100644
index 3cf70c72c5ca..000000000000
--- a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC).
- *
- * Copyright (C) 2015 Seagate
- *
- * Author: Vincent Donnefort <vdonnefort@gmail.com>
- */
-
-/*
- * Here are some information allowing to identify the device:
- *
- * Product name                 : Seagate NAS 4-Bay
- * Code name (board/PCB)        : Dart 4-Bay
- * Model name (case sticker)    : SRPD40
- * Material desc (product spec) : STCUxxxxxxx
- */
-
-/dts-v1/;
-#include "armada-370-seagate-nas-xbay.dtsi"
-#include <dt-bindings/leds/leds-ns2.h>
-
-/ {
-	model = "Seagate NAS 4-Bay (Dart, SRPD40)";
-	compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
-
-	soc {
-		internal-regs {
-			ethernet@74000 {
-				status = "okay";
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			i2c@11000 {
-				/* I2C GPIO expander (PCA9554A) */
-				pca9554: pca9554@21 {
-					compatible = "nxp,pca9554";
-					reg = <0x21>;
-					#gpio-cells = <2>;
-					gpio-controller;
-				};
-			};
-		};
-	};
-
-	regulators {
-		regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "SATA2 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
-		};
-		regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "SATA3 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		red-sata2 {
-			label = "dart:red:sata2";
-			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
-		};
-		red-sata3 {
-			label = "dart:red:sata3";
-			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds-ns2 {
-		compatible = "lacie,ns2-leds";
-
-		white-sata2 {
-			label = "dart:white:sata2";
-			cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>;
-			slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>;
-			num-modes = <4>;
-			modes-map = <NS_V2_LED_SATA 0 0
-				     NS_V2_LED_OFF  0 1
-				     NS_V2_LED_ON   1 0
-				     NS_V2_LED_ON   1 1>;
-		};
-		white-sata3 {
-			label = "dart:white:sata3";
-			cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
-			slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>;
-			num-modes = <4>;
-			modes-map = <NS_V2_LED_SATA 0 0
-				     NS_V2_LED_OFF  0 1
-				     NS_V2_LED_ON   1 0
-				     NS_V2_LED_ON   1 1>;
-		};
-	};
-
-	gpio-fan {
-		gpio-fan,speed-map =
-			<   0 3
-			  800 2
-			  1050 1
-			  1300 0>;
-	};
-};
-
-&pciec {
-	/* SATA AHCI controller 88SE9170 */
-	pcie@1,0 {
-		status = "okay";
-	};
-};
-
-&mdio {
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
deleted file mode 100644
index 5ee572dc9242..000000000000
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC).
- *
- * Copyright (C) 2015 Seagate
- *
- * Author: Simon Guinot <simon.guinot@sequanux.org>
- */
-
-/*
- * Here are some information allowing to identify the device:
- *
- * Product name                 : Seagate Personal Cloud 2-Bay
- * Code name (board/PCB)        : Cumulus Max
- * Model name (case sticker)    : SRN22C
- * Material desc (product spec) : STCSxxxxxxx
- */
-
-/dts-v1/;
-#include "armada-370-seagate-personal-cloud.dtsi"
-
-/ {
-	model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)";
-	compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
-
-	soc {
-		internal-regs {
-			sata@a0000 {
-				status = "okay";
-				nr-ports = <2>;
-			};
-		};
-	};
-
-	regulators {
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA1 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
deleted file mode 100644
index cff1269f3fbf..000000000000
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 380 SoC.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-#include "armada-38x.dtsi"
-
-/ {
-	model = "Marvell Armada 380 family SoC";
-	compatible = "marvell,armada380";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-380-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-	};
-
-	soc {
-		internal-regs {
-			pinctrl@18000 {
-				compatible = "marvell,mv88f6810-pinctrl";
-			};
-		};
-
-		pcie {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */>;
-
-			/* x1 port */
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
deleted file mode 100644
index c9ac630e5874..000000000000
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-
-#include "armada-385-clearfog-gtr.dtsi"
-
-/ {
-	model = "SolidRun Clearfog GTR L8";
-};
-
-&mdio {
-	switch0: switch0@4 {
-		compatible = "marvell,mv88e6190";
-		reg = <4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
-		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-				label = "lan8";
-				phy-handle = <&switch0phy0>;
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan7";
-				phy-handle = <&switch0phy1>;
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan6";
-				phy-handle = <&switch0phy2>;
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan5";
-				phy-handle = <&switch0phy3>;
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "lan4";
-				phy-handle = <&switch0phy4>;
-			};
-
-			port@6 {
-				reg = <6>;
-				label = "lan3";
-				phy-handle = <&switch0phy5>;
-			};
-
-			port@7 {
-				reg = <7>;
-				label = "lan2";
-				phy-handle = <&switch0phy6>;
-			};
-
-			port@8 {
-				reg = <8>;
-				label = "lan1";
-				phy-handle = <&switch0phy7>;
-			};
-
-			port@10 {
-				reg = <10>;
-				label = "cpu";
-				ethernet = <&eth1>;
-			};
-
-		};
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			switch0phy0: switch0phy0@1 {
-				reg = <0x1>;
-			};
-
-			switch0phy1: switch0phy1@2 {
-				reg = <0x2>;
-			};
-
-			switch0phy2: switch0phy2@3 {
-				reg = <0x3>;
-			};
-
-			switch0phy3: switch0phy3@4 {
-				reg = <0x4>;
-			};
-
-			switch0phy4: switch0phy4@5 {
-				reg = <0x5>;
-			};
-
-			switch0phy5: switch0phy5@6 {
-				reg = <0x6>;
-			};
-
-			switch0phy6: switch0phy6@7 {
-				reg = <0x7>;
-			};
-
-			switch0phy7: switch0phy7@8 {
-				reg = <0x8>;
-			};
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
deleted file mode 100644
index fa653b379490..000000000000
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-
-#include "armada-385-clearfog-gtr.dtsi"
-
-/ {
-	model = "SolidRun Clearfog GTR S4";
-};
-
-&sfp0 {
-	tx-fault-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-};
-
-&mdio {
-	switch0: switch0@4 {
-		compatible = "marvell,mv88e6085";
-		reg = <4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
-		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-				label = "lan2";
-				phy-handle = <&switch0phy0>;
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan1";
-				phy-handle = <&switch0phy1>;
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan4";
-				phy-handle = <&switch0phy2>;
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan3";
-				phy-handle = <&switch0phy3>;
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-				ethernet = <&eth1>;
-			};
-
-		};
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			switch0phy0: switch0phy0@11 {
-				reg = <0x11>;
-			};
-
-			switch0phy1: switch0phy1@12 {
-				reg = <0x12>;
-			};
-
-			switch0phy2: switch0phy2@13 {
-				reg = <0x13>;
-			};
-
-			switch0phy3: switch0phy3@14 {
-				reg = <0x14>;
-			};
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
deleted file mode 100644
index 5130eccc32af..000000000000
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ /dev/null
@@ -1,176 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Marvell Armada 388 evaluation board
- * (DB-88F6820)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-/dts-v1/;
-#include "armada-388.dtsi"
-
-/ {
-	model = "Marvell Armada 385 Development Board";
-	compatible = "marvell,a385-db", "marvell,armada388",
-		"marvell,armada385", "marvell,armada380";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
-		internal-regs {
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <2>;
-				bm,pool-short = <3>;
-			};
-
-			usb@58000 {
-				status = "ok";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-				bm,pool-short = <1>;
-			};
-
-			mdio@72004 {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			sata@a8000 {
-				status = "okay";
-			};
-
-			sata@e0000 {
-				status = "okay";
-			};
-
-			bm@c8000 {
-				status = "okay";
-			};
-
-			sdhci@d8000 {
-				broken-cd;
-				wp-inverted;
-				bus-width = <8>;
-				status = "okay";
-				no-1-8-v;
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				status = "okay";
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-
-		pcie {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "w25q32", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0 0x800000>;
-			};
-			partition@800000 {
-				label = "Linux";
-				reg = <0x800000 0x800000>;
-			};
-			partition@1000000 {
-				label = "Filesystem";
-				reg = <0x1000000 0x3f000000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
deleted file mode 100644
index 8558bf6bb54c..000000000000
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ /dev/null
@@ -1,207 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * Contains definitions specific to the Armada XP MV78230 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78230 SoC";
-	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
-		 * configured as x4 or quad x1 lanes. One unit is
-		 * x1 only.
-		 */
-		pciec: pcie@82000000 {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
-
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie5: pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18100 0x40>, <0x181c0 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18140 0x40>, <0x181c8 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <17>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>;
-				clocks = <&coreclk 0>;
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv78230-pinctrl";
-};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
deleted file mode 100644
index 2d85fe8ac327..000000000000
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ /dev/null
@@ -1,314 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * Contains definitions specific to the Armada XP MV78260 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78260 SoC";
-	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
-		 * configured as x4 or quad x1 lanes. One unit is
-		 * x4 only.
-		 */
-		pciec: pcie@82000000 {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
-				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
-				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-
-				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
-				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
-				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
-				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
-				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
-				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
-
-				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
-
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie5: pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-
-			pcie6: pcie@6,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
-				reg = <0x3000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
-					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-			};
-
-			pcie7: pcie@7,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
-				reg = <0x3800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
-					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-			};
-
-			pcie8: pcie@8,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
-				reg = <0x4000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
-					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 12>;
-				status = "disabled";
-			};
-
-			pcie9: pcie@9,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18100 0x40>, <0x181c0 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18140 0x40>, <0x181c8 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			eth3: ethernet@34000 {
-				compatible = "marvell,armada-xp-neta";
-				reg = <0x34000 0x4000>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv78260-pinctrl";
-};
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
deleted file mode 100644
index 230a3fd36b30..000000000000
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ /dev/null
@@ -1,353 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * Contains definitions specific to the Armada XP MV78460 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78460 SoC";
-	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <2>;
-			clocks = <&cpuclk 2>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <3>;
-			clocks = <&cpuclk 3>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
-		 * configured as x4 or quad x1 lanes. Two units are
-		 * x4/x1.
-		 */
-		pciec: pcie@82000000 {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
-				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
-				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
-				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-
-				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
-				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
-				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
-				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
-				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
-				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
-
-				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
-
-				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
-				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
-
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie5: pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-
-			pcie6: pcie@6,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
-				reg = <0x3000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
-					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-			};
-
-			pcie7: pcie@7,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
-				reg = <0x3800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
-					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-			};
-
-			pcie8: pcie@8,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
-				reg = <0x4000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
-					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 12>;
-				status = "disabled";
-			};
-
-			pcie9: pcie@9,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-
-			pcie10: pcie@a,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
-				reg = <0x5000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
-					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 103>;
-				marvell,pcie-port = <3>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 27>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18100 0x40>, <0x181c0 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18140 0x40>, <0x181c8 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			eth3: ethernet@34000 {
-				compatible = "marvell,armada-xp-neta";
-				reg = <0x34000 0x4000>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv78460-pinctrl";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts
deleted file mode 100644
index 9c6271a17ae8..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts
+++ /dev/null
@@ -1,544 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2020 Facebook Inc.
-
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include "ast2600-facebook-netbmc-common.dtsi"
-
-/ {
-	model = "Facebook Cloudripper BMC";
-	compatible = "facebook,cloudripper-bmc", "aspeed,ast2600";
-
-	aliases {
-		/*
-		 * PCA9548 (1-0070) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-
-		/*
-		 * PCA9548 (2-0070) provides 8 channels connecting to
-		 * SCM (System Controller Module).
-		 */
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-
-		/*
-		 * PCA9548 (3-0070) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c32 = &imux32;
-		i2c33 = &imux33;
-		i2c34 = &imux34;
-		i2c35 = &imux35;
-		i2c36 = &imux36;
-		i2c37 = &imux37;
-		i2c38 = &imux38;
-		i2c39 = &imux39;
-
-		/*
-		 * PCA9548 (8-0070) provides 8 channels connecting to
-		 * PDB (Power Delivery Board).
-		 */
-		i2c40 = &imux40;
-		i2c41 = &imux41;
-		i2c42 = &imux42;
-		i2c43 = &imux43;
-		i2c44 = &imux44;
-		i2c45 = &imux45;
-		i2c46 = &imux46;
-		i2c47 = &imux47;
-
-		/*
-		 * PCA9548 (15-0076) provides 8 channels connecting to
-		 * FCM (Fan Controller Module).
-		 */
-		i2c48 = &imux48;
-		i2c49 = &imux49;
-		i2c50 = &imux50;
-		i2c51 = &imux51;
-		i2c52 = &imux52;
-		i2c53 = &imux53;
-		i2c54 = &imux54;
-		i2c55 = &imux55;
-	};
-
-	spi_gpio: spi-gpio {
-		num-chipselects = <2>;
-		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
-			   <&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
-
-		eeprom@1 {
-			compatible = "atmel,at93c46d";
-			spi-max-frequency = <250000>;
-			data-size = <16>;
-			spi-cs-high;
-			reg = <1>;
-		};
-	};
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-/*
- * "mdio1" is connected to the MDC/MDIO interface of the on-board
- * management switch (whose ports are connected to BMC, Host and front
- * panel ethernet port).
- */
-&mdio1 {
-	status = "okay";
-};
-
-&mdio3 {
-	status = "okay";
-
-	ethphy1: ethernet-phy@13 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0x0d>;
-	};
-};
-
-&mac3 {
-	status = "okay";
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii4_default>;
-};
-
-&i2c0 {
-	multi-master;
-	bus-frequency = <1000000>;
-};
-
-&i2c1 {
-	/*
-	 * PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch
-	 * Main Board).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c2 {
-	/*
-	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
-	 * Controller Module).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c3 {
-	/*
-	 * PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch
-	 * Main Board).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux32: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux33: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux34: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux35: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux36: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux37: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux38: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux39: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c6 {
-	lp5012@14 {
-		compatible = "ti,lp5012";
-		reg = <0x14>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		multi-led@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			color = <LED_COLOR_ID_MULTI>;
-			function = LED_FUNCTION_ACTIVITY;
-			label = "sys";
-
-			led@0 {
-				reg = <0>;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@1 {
-				reg = <1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@2 {
-				reg = <2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-		};
-
-		multi-led@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			color = <LED_COLOR_ID_MULTI>;
-			function = LED_FUNCTION_ACTIVITY;
-			label = "fan";
-
-			led@0 {
-				reg = <0>;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@1 {
-				reg = <1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@2 {
-				reg = <2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-		};
-
-		multi-led@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			color = <LED_COLOR_ID_MULTI>;
-			function = LED_FUNCTION_ACTIVITY;
-			label = "psu";
-
-			led@0 {
-				reg = <0>;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@1 {
-				reg = <1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@2 {
-				reg = <2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-		};
-
-		multi-led@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			color = <LED_COLOR_ID_MULTI>;
-			function = LED_FUNCTION_ACTIVITY;
-			label = "scm";
-
-			led@0 {
-				reg = <0>;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@1 {
-				reg = <1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@2 {
-				reg = <2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-		};
-	};
-};
-
-&i2c8 {
-	/*
-	 * PCA9548 (8-0070) provides 8 channels connecting to PDB (Power
-	 * Delivery Board).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux40: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux41: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux42: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux43: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux44: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux45: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux46: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux47: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
-	};
-};
-
-&i2c15 {
-	/*
-	 * PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan
-	 * Controller Module).
-	 */
-	i2c-switch@76 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x76>;
-		i2c-mux-idle-disconnect;
-
-		imux48: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux49: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux50: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux51: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux52: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux53: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux54: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux55: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
deleted file mode 100644
index af58a73bbc49..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
+++ /dev/null
@@ -1,1251 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2020 Facebook Inc.
-
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include "ast2600-facebook-netbmc-common.dtsi"
-
-/ {
-	model = "Facebook Fuji BMC";
-	compatible = "facebook,fuji-bmc", "aspeed,ast2600";
-
-	aliases {
-		/*
-		 * PCA9548 (2-0070) provides 8 channels connecting to
-		 * SCM (System Controller Module).
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-
-		/*
-		 * PCA9548 (8-0070) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-
-		/*
-		 * PCA9548 (11-0077) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c40 = &imux40;
-		i2c41 = &imux41;
-		i2c42 = &imux42;
-		i2c43 = &imux43;
-		i2c44 = &imux44;
-		i2c45 = &imux45;
-		i2c46 = &imux46;
-		i2c47 = &imux47;
-
-		/*
-		 * PCA9548 (24-0071) provides 8 channels connecting to
-		 * PDB-Left.
-		 */
-		i2c48 = &imux48;
-		i2c49 = &imux49;
-		i2c50 = &imux50;
-		i2c51 = &imux51;
-		i2c52 = &imux52;
-		i2c53 = &imux53;
-		i2c54 = &imux54;
-		i2c55 = &imux55;
-
-		/*
-		 * PCA9548 (25-0072) provides 8 channels connecting to
-		 * PDB-Right.
-		 */
-		i2c56 = &imux56;
-		i2c57 = &imux57;
-		i2c58 = &imux58;
-		i2c59 = &imux59;
-		i2c60 = &imux60;
-		i2c61 = &imux61;
-		i2c62 = &imux62;
-		i2c63 = &imux63;
-
-		/*
-		 * PCA9548 (26-0076) provides 8 channels connecting to
-		 * FCM1.
-		 */
-		i2c64 = &imux64;
-		i2c65 = &imux65;
-		i2c66 = &imux66;
-		i2c67 = &imux67;
-		i2c68 = &imux68;
-		i2c69 = &imux69;
-		i2c70 = &imux70;
-		i2c71 = &imux71;
-
-		/*
-		 * PCA9548 (27-0076) provides 8 channels connecting to
-		 * FCM2.
-		 */
-		i2c72 = &imux72;
-		i2c73 = &imux73;
-		i2c74 = &imux74;
-		i2c75 = &imux75;
-		i2c76 = &imux76;
-		i2c77 = &imux77;
-		i2c78 = &imux78;
-		i2c79 = &imux79;
-
-		/*
-		 * PCA9548 (40-0076) provides 8 channels connecting to
-		 * PIM1.
-		 */
-		i2c80 = &imux80;
-		i2c81 = &imux81;
-		i2c82 = &imux82;
-		i2c83 = &imux83;
-		i2c84 = &imux84;
-		i2c85 = &imux85;
-		i2c86 = &imux86;
-		i2c87 = &imux87;
-
-		/*
-		 * PCA9548 (41-0076) provides 8 channels connecting to
-		 * PIM2.
-		 */
-		i2c88 = &imux88;
-		i2c89 = &imux89;
-		i2c90 = &imux90;
-		i2c91 = &imux91;
-		i2c92 = &imux92;
-		i2c93 = &imux93;
-		i2c94 = &imux94;
-		i2c95 = &imux95;
-
-		/*
-		 * PCA9548 (42-0076) provides 8 channels connecting to
-		 * PIM3.
-		 */
-		i2c96 = &imux96;
-		i2c97 = &imux97;
-		i2c98 = &imux98;
-		i2c99 = &imux99;
-		i2c100 = &imux100;
-		i2c101 = &imux101;
-		i2c102 = &imux102;
-		i2c103 = &imux103;
-
-		/*
-		 * PCA9548 (43-0076) provides 8 channels connecting to
-		 * PIM4.
-		 */
-		i2c104 = &imux104;
-		i2c105 = &imux105;
-		i2c106 = &imux106;
-		i2c107 = &imux107;
-		i2c108 = &imux108;
-		i2c109 = &imux109;
-		i2c110 = &imux110;
-		i2c111 = &imux111;
-
-		/*
-		 * PCA9548 (44-0076) provides 8 channels connecting to
-		 * PIM5.
-		 */
-		i2c112 = &imux112;
-		i2c113 = &imux113;
-		i2c114 = &imux114;
-		i2c115 = &imux115;
-		i2c116 = &imux116;
-		i2c117 = &imux117;
-		i2c118 = &imux118;
-		i2c119 = &imux119;
-
-		/*
-		 * PCA9548 (45-0076) provides 8 channels connecting to
-		 * PIM6.
-		 */
-		i2c120 = &imux120;
-		i2c121 = &imux121;
-		i2c122 = &imux122;
-		i2c123 = &imux123;
-		i2c124 = &imux124;
-		i2c125 = &imux125;
-		i2c126 = &imux126;
-		i2c127 = &imux127;
-
-		/*
-		 * PCA9548 (46-0076) provides 8 channels connecting to
-		 * PIM7.
-		 */
-		i2c128 = &imux128;
-		i2c129 = &imux129;
-		i2c130 = &imux130;
-		i2c131 = &imux131;
-		i2c132 = &imux132;
-		i2c133 = &imux133;
-		i2c134 = &imux134;
-		i2c135 = &imux135;
-
-		/*
-		 * PCA9548 (47-0076) provides 8 channels connecting to
-		 * PIM8.
-		 */
-		i2c136 = &imux136;
-		i2c137 = &imux137;
-		i2c138 = &imux138;
-		i2c139 = &imux139;
-		i2c140 = &imux140;
-		i2c141 = &imux141;
-		i2c142 = &imux142;
-		i2c143 = &imux143;
-	};
-
-	spi_gpio: spi-gpio {
-		num-chipselects = <3>;
-		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
-			   <0>,	/* device reg=<1> does not exist */
-			   <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
-
-		eeprom@2 {
-			compatible = "atmel,at93c46d";
-			spi-max-frequency = <250000>;
-			data-size = <16>;
-			spi-cs-high;
-			reg = <2>;
-		};
-	};
-};
-
-&i2c0 {
-	multi-master;
-	bus-frequency = <1000000>;
-};
-
-&i2c2 {
-	/*
-	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
-	 * Controller Module).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			adm1278@10 {
-				compatible = "adi,adm1278";
-				reg = <0x10>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				shunt-resistor-micro-ohms = <1500>;
-			};
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c8 {
-	/*
-	 * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
-	 * Main Board).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			i2c-switch@71 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x71>;
-				i2c-mux-idle-disconnect;
-
-				imux48: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux49: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux50: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-
-					lp5012@14 {
-						compatible = "ti,lp5012";
-						reg = <0x14>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						multi-led@0 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <0>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "sys";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-
-						multi-led@1 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <1>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "fan";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-
-						multi-led@2 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <2>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "psu";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-
-						multi-led@3 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <3>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "smb";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-					};
-				};
-
-				imux51: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux52: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux53: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux54: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux55: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			i2c-switch@72 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72>;
-				i2c-mux-idle-disconnect;
-
-				imux56: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux57: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux58: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux59: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux60: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux61: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux62: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux63: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux64: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux65: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux66: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux67: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-
-					adm1278@10 {
-						compatible = "adi,adm1278";
-						reg = <0x10>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-						shunt-resistor-micro-ohms = <250>;
-					};
-				};
-
-				imux68: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux69: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux70: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux71: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux72: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux73: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux74: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux75: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-
-					adm1278@10 {
-						compatible = "adi,adm1278";
-						reg = <0x10>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-						shunt-resistor-micro-ohms = <250>;
-					};
-				};
-
-				imux76: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux77: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux78: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux79: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	/*
-	 * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
-	 * Main Board).
-	 */
-	i2c-switch@77 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x77>;
-		i2c-mux-idle-disconnect;
-
-		imux40: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux80: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux81: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux82: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux83: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux84: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux85: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux86: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux87: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux41: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux88: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux89: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux90: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux91: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux92: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux93: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux94: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux95: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux42: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux96: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux97: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux98: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux99: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux100: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux101: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux102: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux103: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux43: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux104: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux105: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux106: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux107: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux108: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux109: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux110: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux111: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux44: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux112: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux113: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux114: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux115: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux116: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux117: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux118: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux119: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux45: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux120: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux121: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux122: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux123: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux124: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux125: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux126: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux127: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux46: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux128: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux129: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux130: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux131: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux132: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux133: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux134: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux135: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux47: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux136: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux137: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux138: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux139: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux140: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux141: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux142: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux143: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-	};
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&mdio1 {
-	status = "okay";
-
-	ethphy3: ethernet-phy@13 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0x0d>;
-	};
-};
-
-&mac3 {
-	status = "okay";
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii4_default>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
deleted file mode 100644
index a901c8be49b9..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
+++ /dev/null
@@ -1,374 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2019 Facebook Inc.
-/dts-v1/;
-
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include "ast2500-facebook-netbmc-common.dtsi"
-
-/ {
-	model = "Facebook Wedge 400 BMC";
-	compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
-
-	aliases {
-		/*
-		 * PCA9548 (2-0070) provides 8 channels connecting to
-		 * SCM (System Controller Module).
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-
-		/*
-		 * PCA9548 (8-0070) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-
-		/*
-		 * PCA9548 (11-0076) provides 8 channels connecting to
-		 * FCM (Fan Controller Module).
-		 */
-		i2c32 = &imux32;
-		i2c33 = &imux33;
-		i2c34 = &imux34;
-		i2c35 = &imux35;
-		i2c36 = &imux36;
-		i2c37 = &imux37;
-		i2c38 = &imux38;
-		i2c39 = &imux39;
-
-		spi2 = &spi_gpio;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
-	};
-
-	ast-adc-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
-	};
-
-	/*
-	 * GPIO-based SPI Master is required to access SPI TPM, because
-	 * full-duplex SPI transactions are not supported by ASPEED SPI
-	 * Controllers.
-	 */
-	spi_gpio: spi-gpio {
-		status = "okay";
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
-		gpio-sck = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
-		num-chipselects = <1>;
-
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
-			spi-max-frequency = <33000000>;
-			reg = <0>;
-		};
-	};
-};
-
-/*
- * Both firmware flashes are 128MB on Wedge400 BMC.
- */
-&fmc_flash0 {
-#include "facebook-bmc-flash-layout-128.dtsi"
-};
-
-&fmc_flash1 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		flash1@0 {
-			reg = <0x0 0x8000000>;
-			label = "flash1";
-		};
-	};
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default
-		     &pinctrl_rxd2_default>;
-};
-
-&uart4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd4_default
-		     &pinctrl_rxd4_default>;
-};
-
-/*
- * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
- * communication.
- */
-&i2c0 {
-	status = "okay";
-	multi-master;
-	bus-frequency = <1000000>;
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
-	};
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-
-	i2c-switch@76 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x76>;
-		i2c-mux-idle-disconnect;
-
-		imux32: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux33: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux34: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux35: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux36: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux37: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux38: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux39: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
-	};
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};
-
-&sdhci1 {
-	/*
-	 * DMA mode needs to be disabled to avoid conflicts with UHCI
-	 * Controller in AST2500 SoC.
-	 */
-	sdhci-caps-mask = <0x0 0x580000>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
deleted file mode 100644
index a6a2bc3b855c..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ /dev/null
@@ -1,3674 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2020 IBM Corp.
-/dts-v1/;
-
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/i2c/i2c.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Everest";
-	compatible = "ibm,everest-bmc", "aspeed,ast2600";
-
-	aliases {
-		i2c100 = &cfam0_i2c0;
-		i2c101 = &cfam0_i2c1;
-		i2c110 = &cfam0_i2c10;
-		i2c111 = &cfam0_i2c11;
-		i2c112 = &cfam0_i2c12;
-		i2c113 = &cfam0_i2c13;
-		i2c114 = &cfam0_i2c14;
-		i2c115 = &cfam0_i2c15;
-		i2c202 = &cfam1_i2c2;
-		i2c203 = &cfam1_i2c3;
-		i2c210 = &cfam1_i2c10;
-		i2c211 = &cfam1_i2c11;
-		i2c214 = &cfam1_i2c14;
-		i2c215 = &cfam1_i2c15;
-		i2c216 = &cfam1_i2c16;
-		i2c217 = &cfam1_i2c17;
-		i2c300 = &cfam2_i2c0;
-		i2c301 = &cfam2_i2c1;
-		i2c310 = &cfam2_i2c10;
-		i2c311 = &cfam2_i2c11;
-		i2c312 = &cfam2_i2c12;
-		i2c313 = &cfam2_i2c13;
-		i2c314 = &cfam2_i2c14;
-		i2c315 = &cfam2_i2c15;
-		i2c402 = &cfam3_i2c2;
-		i2c403 = &cfam3_i2c3;
-		i2c410 = &cfam3_i2c10;
-		i2c411 = &cfam3_i2c11;
-		i2c414 = &cfam3_i2c14;
-		i2c415 = &cfam3_i2c15;
-		i2c416 = &cfam3_i2c16;
-		i2c417 = &cfam3_i2c17;
-		i2c500 = &cfam4_i2c0;
-		i2c501 = &cfam4_i2c1;
-		i2c510 = &cfam4_i2c10;
-		i2c511 = &cfam4_i2c11;
-		i2c512 = &cfam4_i2c12;
-		i2c513 = &cfam4_i2c13;
-		i2c514 = &cfam4_i2c14;
-		i2c515 = &cfam4_i2c15;
-		i2c602 = &cfam5_i2c2;
-		i2c603 = &cfam5_i2c3;
-		i2c610 = &cfam5_i2c10;
-		i2c611 = &cfam5_i2c11;
-		i2c614 = &cfam5_i2c14;
-		i2c615 = &cfam5_i2c15;
-		i2c616 = &cfam5_i2c16;
-		i2c617 = &cfam5_i2c17;
-		i2c700 = &cfam6_i2c0;
-		i2c701 = &cfam6_i2c1;
-		i2c710 = &cfam6_i2c10;
-		i2c711 = &cfam6_i2c11;
-		i2c712 = &cfam6_i2c12;
-		i2c713 = &cfam6_i2c13;
-		i2c714 = &cfam6_i2c14;
-		i2c715 = &cfam6_i2c15;
-		i2c802 = &cfam7_i2c2;
-		i2c803 = &cfam7_i2c3;
-		i2c810 = &cfam7_i2c10;
-		i2c811 = &cfam7_i2c11;
-		i2c814 = &cfam7_i2c14;
-		i2c815 = &cfam7_i2c15;
-		i2c816 = &cfam7_i2c16;
-		i2c817 = &cfam7_i2c17;
-
-		i2c16 = &i2c4mux0chn0;
-		i2c17 = &i2c4mux0chn1;
-		i2c18 = &i2c4mux0chn2;
-		i2c19 = &i2c5mux0chn0;
-		i2c20 = &i2c5mux0chn1;
-		i2c21 = &i2c5mux0chn2;
-		i2c22 = &i2c5mux0chn3;
-		i2c23 = &i2c6mux0chn0;
-		i2c24 = &i2c6mux0chn1;
-		i2c25 = &i2c6mux0chn2;
-		i2c26 = &i2c6mux0chn3;
-		i2c27 = &i2c14mux0chn0;
-		i2c28 = &i2c14mux0chn1;
-		i2c29 = &i2c14mux0chn2;
-		i2c30 = &i2c14mux0chn3;
-		i2c31 = &i2c14mux1chn0;
-		i2c32 = &i2c14mux1chn1;
-		i2c33 = &i2c14mux1chn2;
-		i2c34 = &i2c14mux1chn3;
-		i2c35 = &i2c15mux0chn0;
-		i2c36 = &i2c15mux0chn1;
-		i2c37 = &i2c15mux0chn2;
-		i2c38 = &i2c15mux0chn3;
-		i2c39 = &i2c15mux1chn0;
-		i2c40 = &i2c15mux1chn1;
-		i2c41 = &i2c15mux1chn2;
-		i2c42 = &i2c15mux1chn3;
-		i2c43 = &i2c15mux2chn0;
-		i2c44 = &i2c15mux2chn1;
-		i2c45 = &i2c15mux2chn2;
-		i2c46 = &i2c15mux2chn3;
-		i2c47 = &i2c8mux0chn0;
-		i2c48 = &i2c8mux0chn1;
-
-		serial4 = &uart5;
-
-		spi10 = &cfam0_spi0;
-		spi11 = &cfam0_spi1;
-		spi12 = &cfam0_spi2;
-		spi13 = &cfam0_spi3;
-		spi20 = &cfam1_spi0;
-		spi21 = &cfam1_spi1;
-		spi22 = &cfam1_spi2;
-		spi23 = &cfam1_spi3;
-		spi30 = &cfam2_spi0;
-		spi31 = &cfam2_spi1;
-		spi32 = &cfam2_spi2;
-		spi33 = &cfam2_spi3;
-		spi40 = &cfam3_spi0;
-		spi41 = &cfam3_spi1;
-		spi42 = &cfam3_spi2;
-		spi43 = &cfam3_spi3;
-		spi50 = &cfam4_spi0;
-		spi51 = &cfam4_spi1;
-		spi52 = &cfam4_spi2;
-		spi53 = &cfam4_spi3;
-		spi60 = &cfam5_spi0;
-		spi61 = &cfam5_spi1;
-		spi62 = &cfam5_spi2;
-		spi63 = &cfam5_spi3;
-		spi70 = &cfam6_spi0;
-		spi71 = &cfam6_spi1;
-		spi72 = &cfam6_spi2;
-		spi73 = &cfam6_spi3;
-		spi80 = &cfam7_spi0;
-		spi81 = &cfam7_spi1;
-		spi82 = &cfam7_spi2;
-		spi83 = &cfam7_spi3;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200n8";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/* LPC FW cycle bridge region requires natural alignment */
-		flash_memory: region@b8000000 {
-			no-map;
-			reg = <0xb8000000 0x04000000>; /* 64M */
-		};
-
-		/* 48MB region from the end of flash to start of vga memory */
-		ramoops@bc000000 {
-			compatible = "ramoops";
-			reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
-			record-size = <0x8000>;
-			console-size = <0x8000>;
-			ftrace-size = <0x8000>;
-			pmsg-size = <0x8000>;
-			max-reason = <3>; /* KMSG_DUMP_EMERG */
-		};
-
-		/* VGA region is dictated by hardware strapping */
-		vga_memory: region@bf000000 {
-			no-map;
-			compatible = "shared-dma-pool";
-			reg = <0xbf000000 0x01000000>; /* 16M */
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		event-fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
-			linux,code = <15>;
-		};
-
-		event-fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
-			linux,code = <14>;
-		};
-
-		event-fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
-			linux,code = <13>;
-		};
-
-		event-fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
-			linux,code = <12>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		/* RTC battery fault LED at the back */
-		led-rtc-battery {
-			gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
-		};
-
-		/* BMC Card fault LED at the back */
-		led-bmc {
-			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		/* Enclosure Identify LED at the back */
-		led-rear-enc-id0 {
-			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		/* Enclosure fault LED at the back */
-		led-rear-enc-fault0 {
-			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
-		};
-
-		/* PCIE slot power LED */
-		led-pcieslot-power {
-			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc1 7>;
-	};
-};
-
-&adc1 {
-	status = "okay";
-	aspeed,int-vref-microvolt = <2500000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
-				 &pinctrl_adc10_default &pinctrl_adc11_default
-				 &pinctrl_adc12_default &pinctrl_adc13_default
-				 &pinctrl_adc14_default &pinctrl_adc15_default>;
-};
-
-&gpio0 {
-	gpio-line-names =
-	/*A0-A7*/	"","","","","","","","",
-	/*B0-B7*/	"USERSPACE_RSTIND_BUFF","","","","","","checkstop","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","","","","","","","",
-	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
-	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","usb-power","","","","",
-	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
-	/*Q0-Q7*/	"","","regulator-standby-faulted","","","","","",
-	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",
-	/*S0-S7*/	"","","","","power-ffs-sync-history","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","BMC_3RESTART_ATTEMPT_P","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/   "","","","","","","","";
-
-	usb_power {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
-		output-high;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	pca1: pca9552@62 {
-		compatible = "nxp,pca9552";
-		reg = <0x62>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"presence-ps0",
-			"presence-ps1",
-			"presence-ps2",
-			"presence-ps3",
-			"presence-pdb",
-			"presence-tpm",
-			"", "",
-			"presence-cp0",
-			"presence-cp1",
-			"presence-cp2",
-			"presence-cp3",
-			"presence-dasd",
-			"presence-lcd-op",
-			"presence-base-op",
-			"";
-	};
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-
-	eeprom@54 {
-		compatible = "atmel,24c128";
-		reg = <0x54>;
-	};
-
-	power-supply@68 {
-		compatible = "ibm,cffps";
-		reg = <0x68>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps";
-		reg = <0x69>;
-	};
-
-	power-supply@6b {
-		compatible = "ibm,cffps";
-		reg = <0x6b>;
-	};
-
-	power-supply@6d {
-		compatible = "ibm,cffps";
-		reg = <0x6d>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	pca2: pca9552@65 {
-		compatible = "nxp,pca9552";
-		reg = <0x65>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"presence-cable-card1",
-			"presence-cable-card2",
-			"presence-cable-card3",
-			"presence-cable-card4",
-			"presence-cable-card5",
-			"expander-cable-card1",
-			"expander-cable-card2",
-			"expander-cable-card3",
-			"expander-cable-card4",
-			"expander-cable-card5";
-	};
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c4mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			eeprom@52 {
-				compatible = "atmel,24c64";
-				reg = <0x52>;
-			};
-
-			pca_cable_card_c01: pca9551@62 {
-				compatible = "nxp,pca9551";
-				reg = <0x62>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c01-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c01-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c4mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-
-			pca_cable_card_c02: pca9551@60 {
-				compatible = "nxp,pca9551";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c02-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c02-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c4mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-
-			pca_cable_card_c03: pca9551@61 {
-				compatible = "nxp,pca9551";
-				reg = <0x61>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c03-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c03-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-	};
-};
-
-&i2c5 {
-	status = "okay";
-
-	pca3: pca9552@66 {
-		compatible = "nxp,pca9552";
-		reg = <0x66>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"presence-cable-card6",
-			"presence-cable-card7",
-			"presence-cable-card8",
-			"presence-cable-card9",
-			"presence-cable-card10",
-			"presence-cable-card11",
-			"expander-cable-card6",
-			"expander-cable-card7",
-			"expander-cable-card8",
-			"expander-cable-card9",
-			"expander-cable-card10",
-			"expander-cable-card11";
-	};
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c5mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-
-			pca_cable_card_c04: pca9551@60 {
-				compatible = "nxp,pca9551";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c04-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c04-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c5mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-
-			pca_cable_card_c05: pca9551@61 {
-				compatible = "nxp,pca9551";
-				reg = <0x61>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c05-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c05-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c5mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@52 {
-				compatible = "atmel,24c64";
-				reg = <0x52>;
-			};
-
-			pca_cable_card_c06: pca9551@62 {
-				compatible = "nxp,pca9551";
-				reg = <0x62>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c06-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c06-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c5mux0chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-
-			pca_cable_card_c07: pca9551@63 {
-				compatible = "nxp,pca9551";
-				reg = <0x63>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c07-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c07-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-	};
-};
-
-&i2c6 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c6mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			eeprom@50 {
-			compatible = "atmel,24c64";
-			reg = <0x50>;
-			};
-
-			pca_cable_card_c08: pca9551@60 {
-				compatible = "nxp,pca9551";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c08-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c08-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c6mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			eeprom@52 {
-				compatible = "atmel,24c64";
-				reg = <0x52>;
-			};
-
-			pca_cable_card_c09: pca9551@62 {
-				compatible = "nxp,pca9551";
-				reg = <0x62>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c09-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c09-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c6mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-
-			pca_cable_card_c10: pca9551@63 {
-				compatible = "nxp,pca9551";
-				reg = <0x63>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c10-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c10-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c6mux0chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-
-			pca_cable_card_c11: pca9551@61 {
-				compatible = "nxp,pca9551";
-				reg = <0x61>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c11-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c11-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-	};
-
-	pca_pcie_slot: pca9552@65 {
-		compatible = "nxp,pca9552";
-		reg = <0x65>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@1 {
-			label = "pcieslot-c01";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "pcieslot-c02";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "pcieslot-c03";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "pcieslot-c04";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "pcieslot-c05";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "pcieslot-c06";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "pcieslot-c07";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "pcieslot-c08";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "pcieslot-c09";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "pcieslot-c10";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "pcieslot-c11";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	pic0_dimm: pca9552@31 {
-		compatible = "ibm,pca9552";
-		reg = <0x31>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "ddimm0";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "ddimm1";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "ddimm2";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "ddimm3";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "ddimm4";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "ddimm5";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "ddimm6";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "ddimm7";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "ddimm8";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "ddimm9";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "ddimm10";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "ddimm11";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "ddimm12";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "ddimm13";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "ddimm14";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "ddimm15";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pic1_dimm: pca9552@32 {
-		compatible = "ibm,pca9552";
-		reg = <0x32>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "ddimm16";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "ddimm17";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "ddimm18";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "ddimm19";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "ddimm20";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "ddimm21";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "ddimm22";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "ddimm23";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "ddimm24";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "ddimm25";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "ddimm26";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "ddimm27";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "ddimm28";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "ddimm29";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "ddimm30";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "ddimm31";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pic2_dimm: pca9552@33 {
-		compatible = "ibm,pca9552";
-		reg = <0x33>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "ddimm32";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "ddimm33";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "ddimm34";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "ddimm35";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "ddimm36";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "ddimm37";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "ddimm38";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "ddimm39";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "ddimm40";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "ddimm41";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "ddimm42";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "ddimm43";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "ddimm44";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "ddimm45";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "ddimm46";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "ddimm47";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pic3_dimm: pca9552@30 {
-		compatible = "ibm,pca9552";
-		reg = <0x30>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "ddimm48";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "ddimm49";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "ddimm50";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "ddimm51";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "ddimm52";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "ddimm53";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "ddimm54";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "ddimm55";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "ddimm56";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "ddimm57";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "ddimm58";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "ddimm59";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "ddimm60";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "ddimm61";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "ddimm62";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "ddimm63";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pic0_vrm_misc: pca9552@34 {
-		compatible = "ibm,pca9552";
-		reg = <0x34>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "planar";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "tpm";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "cpu3-c61";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "cpu0-c14";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "opencapi-connector3";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "opencapi-connector4";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "opencapi-connector5";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "vrm4";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "vrm5";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "vrm6";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "vrm7";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "vrm12";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "vrm13";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "vrm14";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "vrm15";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pic1_vrm_misc: pca9552@35 {
-		compatible = "ibm,pca9552";
-		reg = <0x35>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "dasd-backplane";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "power-distribution";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "cpu1-c19";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "cpu2-c56";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "opencapi-connector0";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "opencapi-connector1";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "opencapi-connector2";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "vrm0";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "vrm1";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "vrm2";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "vrm3";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "vrm8";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "vrm9";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "vrm10";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "vrm11";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	ucd90320@11 {
-		compatible = "ti,ucd90320";
-		reg = <0x11>;
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c8mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c8mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-	};
-
-	eeprom@53 {
-		compatible = "atmel,24c128";
-		reg = <0x53>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c128";
-		reg = <0x52>;
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	eeprom@53 {
-		compatible = "atmel,24c128";
-		reg = <0x53>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c128";
-		reg = <0x52>;
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	eeprom@53 {
-		compatible = "atmel,24c128";
-		reg = <0x53>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c128";
-		reg = <0x52>;
-	};
-};
-
-&i2c12 {
-	status = "okay";
-
-	tpm@2e {
-		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
-		reg = <0x2e>;
-	};
-};
-
-&i2c13 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	eeprom@53 {
-		compatible = "atmel,24c128";
-		reg = <0x53>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c128";
-		reg = <0x52>;
-	};
-};
-
-&i2c14 {
-	multi-master;
-	status = "okay";
-
-	ibm-panel@62 {
-		compatible = "ibm,op-panel";
-		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
-	};
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		idle-state = <1>;
-
-		i2c14mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		i2c14mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			eeprom@51 {
-				compatible = "atmel,24c32";
-				reg = <0x51>;
-			};
-		};
-
-		i2c14mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@50 {
-				compatible = "atmel,24c32";
-				reg = <0x50>;
-			};
-
-			pca_oppanel: pca9551@60 {
-				compatible = "nxp,pca9551";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "front-sys-id0";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "front-check-log0";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@2 {
-					label = "front-enc-fault1";
-					reg = <2>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@3 {
-					label = "front-sys-pwron0";
-					reg = <3>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c14mux0chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			max31785@52 {
-				compatible = "maxim,max31785a";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x52>;
-
-				fan@0 {
-					compatible = "pmbus-fan";
-					reg = <0>;
-					tach-pulses = <2>;
-				};
-
-				fan@1 {
-					compatible = "pmbus-fan";
-					reg = <1>;
-					tach-pulses = <2>;
-				};
-
-				fan@2 {
-					compatible = "pmbus-fan";
-					reg = <2>;
-					tach-pulses = <2>;
-				};
-
-				fan@3 {
-					compatible = "pmbus-fan";
-					reg = <3>;
-					tach-pulses = <2>;
-				};
-			};
-
-			pca_fan_nvme: pca9552@60 {
-				compatible = "nxp,pca9552";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "nvme0";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "nvme1";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@2 {
-					label = "nvme2";
-					reg = <2>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@3 {
-					label = "nvme3";
-					reg = <3>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@4 {
-					label = "nvme4";
-					reg = <4>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@5 {
-					label = "nvme5";
-					reg = <5>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@6 {
-					label = "nvme6";
-					reg = <6>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@7 {
-					label = "nvme7";
-					reg = <7>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@8 {
-					label = "nvme8";
-					reg = <8>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@9 {
-					label = "nvme9";
-					reg = <9>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@10 {
-					label = "fan0";
-					reg = <10>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@11 {
-					label = "fan1";
-					reg = <11>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@12 {
-					label = "fan2";
-					reg = <12>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@13 {
-					label = "fan3";
-					reg = <13>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-
-			pca0: pca9552@61 {
-				compatible = "nxp,pca9552";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x61>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				gpio-line-names =
-					"","","","",
-					"","","","",
-					"","","","",
-					"presence-fan3",
-					"presence-fan2",
-					"presence-fan1",
-					"presence-fan0";
-			};
-		};
-	};
-
-	i2c-switch@71 {
-		compatible = "nxp,pca9546";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c14mux1chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			eeprom@50 {
-				compatible = "atmel,24c32";
-				reg = <0x50>;
-			};
-		};
-
-		i2c14mux1chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			eeprom@50 {
-				compatible = "atmel,24c32";
-				reg = <0x50>;
-			};
-		};
-
-		i2c14mux1chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@50 {
-				compatible = "atmel,24c32";
-				reg = <0x50>;
-			};
-		};
-
-		i2c14mux1chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			eeprom@50 {
-				compatible = "atmel,24c32";
-				reg = <0x50>;
-			};
-		};
-	};
-};
-
-&i2c15 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c15mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c15mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c15mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c15mux0chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-	};
-
-	i2c-switch@71 {
-		compatible = "nxp,pca9546";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c15mux1chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c15mux1chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c15mux1chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c15mux1chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-	};
-
-	i2c-switch@72 {
-		compatible = "nxp,pca9546";
-		reg = <0x72>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c15mux2chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c15mux2chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c15mux2chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c15mux2chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};
-
-&emmc_controller {
-	status = "okay";
-};
-
-&pinctrl_emmc_default {
-	bias-disable;
-};
-
-&emmc {
-	status = "okay";
-	clk-phase-mmc-hs200 = <210>, <228>;
-};
-
-&fsim0 {
-	status = "okay";
-
-	#address-cells = <2>;
-	#size-cells = <0>;
-
-	/*
-	 * CFAM Reset is supposed to be active low but pass1 hardware is wired
-	 * active high.
-	 */
-	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
-
-	cfam@0,0 {	/* DCM0_C0 */
-		reg = <0 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <0>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OMI01 */
-			};
-
-			cfam0_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OMI23 */
-			};
-
-			cfam0_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam0_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam0_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam0_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam0_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam0_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ0: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub0: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&fsi_hub0 {
-	cfam@1,0 { /* DCM0_C1 */
-		reg = <1 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <1>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OMI45 */
-			};
-
-			cfam1_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OMI67 */
-			};
-
-			cfam1_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam1_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam1_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam1_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam1_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam1_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ1: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub1: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@2,0 { /* DCM1_C0 */
-		reg = <2 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <2>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam2_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OM01 */
-			};
-
-			cfam2_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OM23 */
-			};
-
-			cfam2_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam2_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam2_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam2_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam2_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam2_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam2_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam2_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam2_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam2_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ2: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub2: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@3,0 { /* DCM1_C1 */
-		reg = <3 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <3>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam3_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OM45 */
-			};
-
-			cfam3_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OM67 */
-			};
-
-			cfam3_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam3_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam3_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam3_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam3_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam3_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam3_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam3_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam3_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam3_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ3: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub3: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@4,0 { /* DCM2_C0 */
-		reg = <4 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <4>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam4_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OM01 */
-			};
-
-			cfam4_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OM23 */
-			};
-
-			cfam4_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam4_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam4_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam4_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam4_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam4_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam4_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam4_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam4_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam4_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ4: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub4: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@5,0 { /* DCM2_C1 */
-		reg = <5 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <5>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam5_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OM45 */
-			};
-
-			cfam5_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OM67 */
-			};
-
-			cfam5_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam5_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam5_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam5_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam5_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam5_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam5_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam5_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam5_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam5_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ5: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub5: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@6,0 { /* DCM3_C0 */
-		reg = <6 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <6>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam6_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OM01 */
-			};
-
-			cfam6_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OM23 */
-			};
-
-			cfam6_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam6_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam6_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam6_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam6_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam6_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam6_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam6_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam6_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam6_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ6: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub6: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@7,0 { /* DCM3_C1 */
-		reg = <7 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <7>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam7_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OM45 */
-			};
-
-			cfam7_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OM67 */
-			};
-
-			cfam7_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam7_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam7_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam7_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam7_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam7_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam7_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam7_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam7_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam7_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ7: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub7: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-};
-
-/* Legacy OCC numbering (to get rid of when userspace is fixed) */
-&fsi_occ0 {
-	reg = <1>;
-};
-
-&fsi_occ1 {
-	reg = <2>;
-};
-
-&fsi_occ2 {
-	reg = <3>;
-};
-
-&fsi_occ3 {
-	reg = <4>;
-};
-
-&fsi_occ4 {
-	reg = <5>;
-};
-
-&fsi_occ5 {
-	reg = <6>;
-};
-
-&fsi_occ6 {
-	reg = <7>;
-};
-
-&fsi_occ7 {
-	reg = <8>;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&vuart1 {
-	status = "okay";
-};
-
-&vuart2 {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-};
-
-&mac2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii3_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
-		 <&syscon ASPEED_CLK_MAC3RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii4_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
-		 <&syscon ASPEED_CLK_MAC4RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	status = "okay";
-};
-
-&xdma {
-	status = "okay";
-	memory-region = <&vga_memory>;
-};
-
-&kcs2 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca8 0xcac>;
-};
-
-&kcs3 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca2>;
-	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
deleted file mode 100644
index bf59a9962379..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ /dev/null
@@ -1,2394 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2019 IBM Corp.
-/dts-v1/;
-
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/i2c/i2c.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Rainier 2U";
-	compatible = "ibm,rainier-bmc", "aspeed,ast2600";
-
-	aliases {
-		i2c100 = &cfam0_i2c0;
-		i2c101 = &cfam0_i2c1;
-		i2c110 = &cfam0_i2c10;
-		i2c111 = &cfam0_i2c11;
-		i2c112 = &cfam0_i2c12;
-		i2c113 = &cfam0_i2c13;
-		i2c114 = &cfam0_i2c14;
-		i2c115 = &cfam0_i2c15;
-		i2c202 = &cfam1_i2c2;
-		i2c203 = &cfam1_i2c3;
-		i2c210 = &cfam1_i2c10;
-		i2c211 = &cfam1_i2c11;
-		i2c214 = &cfam1_i2c14;
-		i2c215 = &cfam1_i2c15;
-		i2c216 = &cfam1_i2c16;
-		i2c217 = &cfam1_i2c17;
-		i2c300 = &cfam2_i2c0;
-		i2c301 = &cfam2_i2c1;
-		i2c310 = &cfam2_i2c10;
-		i2c311 = &cfam2_i2c11;
-		i2c312 = &cfam2_i2c12;
-		i2c313 = &cfam2_i2c13;
-		i2c314 = &cfam2_i2c14;
-		i2c315 = &cfam2_i2c15;
-		i2c402 = &cfam3_i2c2;
-		i2c403 = &cfam3_i2c3;
-		i2c410 = &cfam3_i2c10;
-		i2c411 = &cfam3_i2c11;
-		i2c414 = &cfam3_i2c14;
-		i2c415 = &cfam3_i2c15;
-		i2c416 = &cfam3_i2c16;
-		i2c417 = &cfam3_i2c17;
-
-		serial4 = &uart5;
-		i2c16 = &i2c2mux0;
-		i2c17 = &i2c2mux1;
-		i2c18 = &i2c2mux2;
-		i2c19 = &i2c2mux3;
-		i2c20 = &i2c4mux0chn0;
-		i2c21 = &i2c4mux0chn1;
-		i2c22 = &i2c4mux0chn2;
-		i2c23 = &i2c5mux0chn0;
-		i2c24 = &i2c5mux0chn1;
-		i2c25 = &i2c6mux0chn0;
-		i2c26 = &i2c6mux0chn1;
-		i2c27 = &i2c6mux0chn2;
-		i2c28 = &i2c6mux0chn3;
-		i2c29 = &i2c11mux0chn0;
-		i2c30 = &i2c11mux0chn1;
-
-		spi10 = &cfam0_spi0;
-		spi11 = &cfam0_spi1;
-		spi12 = &cfam0_spi2;
-		spi13 = &cfam0_spi3;
-		spi20 = &cfam1_spi0;
-		spi21 = &cfam1_spi1;
-		spi22 = &cfam1_spi2;
-		spi23 = &cfam1_spi3;
-		spi30 = &cfam2_spi0;
-		spi31 = &cfam2_spi1;
-		spi32 = &cfam2_spi2;
-		spi33 = &cfam2_spi3;
-		spi40 = &cfam3_spi0;
-		spi41 = &cfam3_spi1;
-		spi42 = &cfam3_spi2;
-		spi43 = &cfam3_spi3;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200n8 earlycon";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@b8000000 {
-			no-map;
-			reg = <0xb8000000 0x04000000>; /* 64M */
-		};
-
-		ramoops@bc000000 {
-			compatible = "ramoops";
-			reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
-			record-size = <0x8000>;
-			console-size = <0x8000>;
-			ftrace-size = <0x8000>;
-			pmsg-size = <0x8000>;
-			max-reason = <3>; /* KMSG_DUMP_EMERG */
-		};
-
-		vga_memory: region@bf000000 {
-			no-map;
-			compatible = "shared-dma-pool";
-			reg = <0xbf000000 0x01000000>;  /* 16M */
-		};
-	};
-
-	i2c2mux: i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		i2c-parent = <&i2c2>;
-		mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
-			    <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
-		idle-state = <0>;
-
-		i2c2mux0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c2mux1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		i2c2mux2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c2mux3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		/* BMC Card fault LED at the back */
-		bmc-ingraham0 {
-			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		/* Enclosure ID LED at the back */
-		rear-enc-id0 {
-			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		/* Enclosure fault LED at the back */
-		rear-enc-fault0 {
-			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
-		};
-
-		/* PCIE slot power LED */
-		pcieslot-power {
-			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		event-fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		event-fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-		};
-
-		event-fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
-			linux,code = <8>;
-		};
-
-		event-fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
-			linux,code = <9>;
-		};
-
-		event-fan4-presence {
-			label = "fan4-presence";
-			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
-			linux,code = <10>;
-		};
-
-		event-fan5-presence {
-			label = "fan5-presence";
-			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
-			linux,code = <11>;
-		};
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc1 7>;
-	};
-};
-
-&adc1 {
-	status = "okay";
-	aspeed,int-vref-microvolt = <2500000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
-		&pinctrl_adc10_default &pinctrl_adc11_default
-		&pinctrl_adc12_default &pinctrl_adc13_default
-		&pinctrl_adc14_default &pinctrl_adc15_default>;
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};
-
-&gpio0 {
-	gpio-line-names =
-	/*A0-A7*/	"","","","","","","","",
-	/*B0-B7*/	"","","","","","","checkstop","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","","","","","","","",
-	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
-	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","usb-power","","","","",
-	/*P0-P7*/	"","","","","pcieslot-power","","","",
-	/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
-	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
-	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
-	"power-ffs-sync-history","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","";
-
-	i2c3_mux_oe_n {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
-		output-high;
-		line-name = "I2C3_MUX_OE_N";
-	};
-
-	usb_power {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
-		output-high;
-	};
-};
-
-&emmc_controller {
-	status = "okay";
-};
-
-&pinctrl_emmc_default {
-	bias-disable;
-};
-
-&emmc {
-	status = "okay";
-	clk-phase-mmc-hs200 = <180>, <180>;
-};
-
-&fsim0 {
-	status = "okay";
-
-	#address-cells = <2>;
-	#size-cells = <0>;
-
-	/*
-	 * CFAM Reset is supposed to be active low but pass1 hardware is wired
-	 * active high.
-	 */
-	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
-
-	cfam@0,0 {
-		reg = <0 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <0>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OMI01 */
-			};
-
-			cfam0_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OMI23 */
-			};
-
-			cfam0_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam0_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam0_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam0_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam0_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam0_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-                };
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ0: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub0: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&fsi_hub0 {
-	cfam@1,0 {
-		reg = <1 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <1>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OMI45 */
-			};
-
-			cfam1_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OMI67 */
-			};
-
-			cfam1_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam1_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam1_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam1_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam1_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam1_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-                };
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ1: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub1: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@2,0 {
-		reg = <2 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <2>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam2_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OM01 */
-			};
-
-			cfam2_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OM23 */
-			};
-
-			cfam2_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam2_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam2_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam2_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam2_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam2_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam2_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam2_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam2_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam2_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ2: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub2: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@3,0 {
-		reg = <3 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <3>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam3_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OM45 */
-			};
-
-			cfam3_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OM67 */
-			};
-
-			cfam3_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam3_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam3_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam3_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam3_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam3_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam3_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam3_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam3_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam3_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ3: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub3: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-};
-
-/* Legacy OCC numbering (to get rid of when userspace is fixed) */
-&fsi_occ0 {
-	reg = <1>;
-};
-
-&fsi_occ1 {
-	reg = <2>;
-};
-
-&fsi_occ2 {
-	reg = <3>;
-};
-
-&fsi_occ3 {
-	reg = <4>;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	tca_pres1: tca9554@20{
-		compatible = "ti,tca9554";
-		reg = <0x20>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names = "",
-			"RUSSEL_FW_I2C_ENABLE_N",
-			"RUSSEL_OPPANEL_PRESENCE_N",
-			"BLYTH_OPPANEL_PRESENCE_N",
-			"CPU_TPM_CARD_PRESENT_N",
-			"DASD_BP2_PRESENT_N",
-			"DASD_BP1_PRESENT_N",
-			"DASD_BP0_PRESENT_N";
-	};
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-
-	power-supply@68 {
-		compatible = "ibm,cffps";
-		reg = <0x68>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps";
-		reg = <0x69>;
-	};
-
-	pca_pres1: pca9552@61 {
-		compatible = "nxp,pca9552";
-		reg = <0x61>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
-			"SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
-			"SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
-			"SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
-			"SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
-			"", "", "", "", "", "";
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-
-	pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "cablecard0-cxp-top";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "cablecard0-cxp-bot";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pca9546@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c4mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		i2c4mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-		};
-
-		i2c4mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@52 {
-				compatible = "atmel,24c64";
-				reg = <0x52>;
-			};
-		};
-	};
-};
-
-&i2c5 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-
-	pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "cablecard3-cxp-top";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "cablecard3-cxp-bot";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pca9551@61 {
-		compatible = "nxp,pca9551";
-		reg = <0x61>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "cablecard4-cxp-top";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "cablecard4-cxp-bot";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pca9546@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c5mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		i2c5mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-		};
-	};
-};
-
-&i2c6 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-
-	tmp275@4b {
-		compatible = "ti,tmp275";
-		reg = <0x4b>;
-	};
-
-	pca9546@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c6mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c6mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@52 {
-				compatible = "atmel,24c64";
-				reg = <0x52>;
-			};
-		};
-
-		i2c6mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		i2c6mux0chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-		};
-	};
-};
-
-&i2c7 {
-	multi-master;
-	status = "okay";
-
-	pca9552@30 {
-		compatible = "ibm,pca9552";
-		reg = <0x30>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "pcieslot0";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "pcieslot1";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "pcieslot2";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "pcieslot3";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "pcieslot4";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "cpu1";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "cpu-vrm1";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "lcd-russel";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pca9552@31 {
-		compatible = "ibm,pca9552";
-		reg = <0x31>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "ddimm0";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "ddimm1";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "ddimm2";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "ddimm3";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "ddimm4";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "ddimm5";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "ddimm6";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "ddimm7";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "ddimm8";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "ddimm9";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "ddimm10";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "ddimm11";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "ddimm12";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "ddimm13";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "ddimm14";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "ddimm15";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pca9552@32 {
-		compatible = "ibm,pca9552";
-		reg = <0x32>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "ddimm16";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "ddimm17";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "ddimm18";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "ddimm19";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "ddimm20";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "ddimm21";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "ddimm22";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "ddimm23";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "ddimm24";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "ddimm25";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "ddimm26";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "ddimm27";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "ddimm28";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "ddimm29";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "ddimm30";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "ddimm31";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pca9552@33 {
-		compatible = "ibm,pca9552";
-		reg = <0x33>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "planar";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "cpu0";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "dasd-pyramid0";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "dasd-pyramid1";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "dasd-pyramid2";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "cpu0-vrm0";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "rtc-battery";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "base-blyth";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "pcieslot6";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "pcieslot7";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "pcieslot8";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "pcieslot9";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "pcieslot10";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "pcieslot11";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "tpm-wilson";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	si7021-a20@40 {
-		compatible = "silabs,si7020";
-		reg = <0x40>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	max: max31785@52 {
-		compatible = "maxim,max31785a";
-		reg = <0x52>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fan0: fan@0 {
-			compatible = "pmbus-fan";
-			reg = <0>;
-			tach-pulses = <2>;
-		};
-
-		fan1: fan@1 {
-			compatible = "pmbus-fan";
-			reg = <1>;
-			tach-pulses = <2>;
-		};
-
-		fan2: fan@2 {
-			compatible = "pmbus-fan";
-			reg = <2>;
-			tach-pulses = <2>;
-		};
-
-		fan3: fan@3 {
-			compatible = "pmbus-fan";
-			reg = <3>;
-			tach-pulses = <2>;
-		};
-
-		fan4: fan@4 {
-			compatible = "pmbus-fan";
-			reg = <4>;
-			tach-pulses = <2>;
-		};
-
-		fan5: fan@5 {
-			compatible = "pmbus-fan";
-			reg = <5>;
-			tach-pulses = <2>;
-		};
-	};
-
-	pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "front-sys-id0";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "front-check-log0";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "front-enc-fault1";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "front-sys-pwron0";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pca0: pca9552@61 {
-		compatible = "nxp,pca9552";
-		reg = <0x61>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "fan0";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "fan1";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "fan2";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "fan3";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "fan4";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "fan5";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	ibm-panel@62 {
-		compatible = "ibm,op-panel";
-		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
-	};
-
-	dps: dps310@76 {
-		compatible = "infineon,dps310";
-		reg = <0x76>;
-		#io-channel-cells = <0>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	ucd90320@11 {
-		compatible = "ti,ucd90320";
-		reg = <0x11>;
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	pca_pres3: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"", "", "", "", "", "", "", "",
-			"", "", "", "", "", "", "power-config-full-load", "";
-	};
-
-	pca_pres2: pca9552@61 {
-		compatible = "nxp,pca9552";
-		reg = <0x61>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
-			"SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
-			"SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
-			"SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
-			"SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
-			"SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
-			"", "", "", "";
-	};
-
-};
-
-&i2c9 {
-	status = "okay";
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	tmp423b@4d {
-		compatible = "ti,tmp423";
-		reg = <0x4d>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	tmp423b@4d {
-		compatible = "ti,tmp423";
-		reg = <0x4d>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-
-	pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "cablecard10-cxp-top";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "cablecard10-cxp-bot";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pca9546@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c11mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		i2c11mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-		};
-	};
-};
-
-&i2c12 {
-	status = "okay";
-
-	tpm@2e {
-		compatible = "nuvoton,npct75x";
-		reg = <0x2e>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-};
-
-&i2c13 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "nvme0";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "nvme1";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "nvme2";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "nvme3";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "nvme4";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "nvme5";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "nvme6";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "nvme7";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-};
-
-&i2c14 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "nvme8";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "nvme9";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "nvme10";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "nvme11";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "nvme12";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "nvme13";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "nvme14";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "nvme15";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-};
-
-&i2c15 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "nvme16";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "nvme17";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "nvme18";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "nvme19";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "nvme20";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "nvme21";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "nvme22";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "nvme23";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-};
-
-&vuart1 {
-	status = "okay";
-};
-
-&vuart2 {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-};
-
-&mac2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii3_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
-		 <&syscon ASPEED_CLK_MAC3RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii4_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
-		 <&syscon ASPEED_CLK_MAC4RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	status = "okay";
-};
-
-&xdma {
-	status = "okay";
-	memory-region = <&vga_memory>;
-};
-
-&kcs2 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca8 0xcac>;
-};
-
-&kcs3 {
-	status = "okay";
-	aspeed,lpc-io-reg = <0xca2>;
-	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
deleted file mode 100644
index 48776fb663fb..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ /dev/null
@@ -1,1381 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Mihawk BMC";
-	compatible = "ibm,mihawk-bmc", "aspeed,ast2500";
-
-	aliases {
-		i2c215 = &bus6_mux215;
-		i2c216 = &bus6_mux216;
-		i2c217 = &bus6_mux217;
-		i2c218 = &bus6_mux218;
-		i2c219 = &bus6_mux219;
-		i2c220 = &bus6_mux220;
-		i2c221 = &bus6_mux221;
-		i2c222 = &bus6_mux222;
-		i2c223 = &bus7_mux223;
-		i2c224 = &bus7_mux224;
-		i2c225 = &bus7_mux225;
-		i2c226 = &bus7_mux226;
-		i2c227 = &bus7_mux227;
-		i2c228 = &bus7_mux228;
-		i2c229 = &bus7_mux229;
-		i2c230 = &bus7_mux230;
-		i2c231 = &bus9_mux231;
-		i2c232 = &bus9_mux232;
-		i2c233 = &bus9_mux233;
-		i2c234 = &bus9_mux234;
-		i2c235 = &bus9_mux235;
-		i2c236 = &bus9_mux236;
-		i2c237 = &bus9_mux237;
-		i2c238 = &bus9_mux238;
-		i2c239 = &bus10_mux239;
-		i2c240 = &bus10_mux240;
-		i2c241 = &bus10_mux241;
-		i2c242 = &bus10_mux242;
-		i2c243 = &bus10_mux243;
-		i2c244 = &bus10_mux244;
-		i2c245 = &bus10_mux245;
-		i2c246 = &bus10_mux246;
-		i2c247 = &bus12_mux247;
-		i2c248 = &bus12_mux248;
-		i2c249 = &bus12_mux249;
-		i2c250 = &bus12_mux250;
-		i2c251 = &bus13_mux251;
-		i2c252 = &bus13_mux252;
-		i2c253 = &bus13_mux253;
-		i2c254 = &bus13_mux254;
-		i2c255 = &bus13_mux255;
-		i2c256 = &bus13_mux256;
-		i2c257 = &bus13_mux257;
-		i2c258 = &bus13_mux258;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		event-air-water {
-			label = "air-water";
-			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 6)>;
-		};
-
-		event-checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-
-		event-ps0-presence {
-			label = "ps0-presence";
-			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 2)>;
-		};
-
-		event-ps1-presence {
-			label = "ps1-presence";
-			gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 0)>;
-		};
-
-		button-id {
-			label = "id-button";
-			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 1)>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		event-fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
-			linux,code = <9>;
-		};
-
-		event-fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
-			linux,code = <10>;
-		};
-
-		event-fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
-			linux,code = <11>;
-		};
-
-		event-fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
-			linux,code = <12>;
-		};
-
-		event-fan4-presence {
-			label = "fan4-presence";
-			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
-			linux,code = <13>;
-		};
-
-		event-fan5-presence {
-			label = "fan5-presence";
-			gpios = <&pca9552 14 GPIO_ACTIVE_LOW>;
-			linux,code = <14>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		front-fault {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
-		};
-
-		power-button {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		front-id {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
-		};
-
-
-		fan0 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
-		};
-
-		fan1 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
-		};
-
-		fan2 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
-		};
-
-		fan3 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
-		};
-
-		fan4 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
-		};
-
-		fan5 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		no-gpio-delays;
-
-		clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
-	};
-	iio-hwmon-12v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>;
-	};
-
-	iio-hwmon-5v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 1>;
-	};
-
-	iio-hwmon-3v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 2>;
-	};
-
-	iio-hwmon-vdd0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 3>;
-	};
-
-	iio-hwmon-vdd1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 4>;
-	};
-
-	iio-hwmon-vcs0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 5>;
-	};
-
-	iio-hwmon-vcs1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 6>;
-	};
-
-	iio-hwmon-vdn0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 7>;
-	};
-
-	iio-hwmon-vdn1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 8>;
-	};
-
-	iio-hwmon-vio0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 9>;
-	};
-
-	iio-hwmon-vio1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 10>;
-	};
-
-	iio-hwmon-vddra {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 11>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 12>;
-	};
-
-	iio-hwmon-vddrb {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 13>;
-	};
-
-	iio-hwmon-vddrc {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 14>;
-	};
-
-	iio-hwmon-vddrd {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 15>;
-	};
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
-		&pinctrl_pwm2_default &pinctrl_pwm3_default
-		&pinctrl_pwm4_default &pinctrl_pwm5_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-
-	fan@2 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
-	};
-
-	fan@4 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
-	};
-
-	fan@5 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-
-	fan@6 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
-	};
-
-	fan@7 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
-	};
-
-	fan@8 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
-	};
-
-	fan@9 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
-	};
-
-	fan@10 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
-	};
-
-	fan@11 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
-	};
-};
-
-&gpio {
-	gpio-line-names =
-	/*A0-A7*/	"","cfam-reset","","","","","","",
-	/*B0-B7*/	"","","","","","","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"fsi-enable","","","","","","","",
-	/*E0-E7*/	"","","","","","fsi-mux","fsi-clock","fsi-data",
-	/*F0-F7*/	"","id-button","","","","","air-water","",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","","","","","","","",
-	/*I0-I7*/	"","","","","","","","",
-	/*J0-J7*/	"","","checkstop","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"","","","","","","","",
-	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"","","fsi-trans","","","","","",
-	/*S0-S7*/	"","","","","","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"presence-ps1","","presence-ps0","","","","","",
-	/*AA0-AA7*/	"led-front-fault","power-button","led-front-id","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		label = "bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x1F80000 >;
-				label = "obmc-ubi";
-			};
-		};
-	};
-	flash@1 {
-		status = "okay";
-		label = "alt-bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "alt-u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "alt-u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x1F80000 >;
-				label = "alt-obmc-ubi";
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart2 {
-	/* APSS */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
-	status = "disabled";
-};
-
-&i2c1 {
-	status = "disabled";
-};
-
-&i2c2 {
-	status = "okay";
-
-	/* SAMTEC P0 */
-	/* SAMTEC P1 */
-
-};
-
-&i2c3 {
-	status = "okay";
-
-	/* APSS */
-	/* CPLD */
-
-	/* PCA9516 (repeater) ->
-	 *    CLK Buffer 9FGS9092
-	 *    CLK Buffer 9DBL0651BKILFT
-	 *    CLK Buffer 9DBL0651BKILFT
-	 *    Power Supply 0
-	 *    Power Supply 1
-	 *    PCA 9552 LED
-	 */
-
-	power-supply@58 {
-		compatible = "ibm,cffps1";
-		reg = <0x58>;
-	};
-
-	power-supply@5b {
-		compatible = "ibm,cffps1";
-		reg = <0x5b>;
-	};
-
-	pca9552: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-	};
-
-};
-
-&i2c4 {
-	status = "okay";
-
-	/* CP0 VDD & VCS : IR35221 */
-	/* CP0 VDN : IR35221 */
-	/* CP0 VIO : IR38064 */
-	/* CP0 VDDR : PXM1330 */
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-};
-
-&i2c5 {
-	status = "okay";
-
-	/* CP0 VDD & VCS : IR35221 */
-	/* CP0 VDN : IR35221 */
-	/* CP0 VIO : IR38064 */
-	/* CP0 VDDR : PXM1330 */
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-};
-
-&i2c6 {
-	status = "okay";
-
-	/* pca9548 -> NVMe1 to 8 */
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		bus7_mux223: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		bus7_mux224: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		bus7_mux225: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus7_mux226: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		bus7_mux227: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		bus7_mux228: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		bus7_mux229: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		bus7_mux230: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-
-};
-
-&i2c7 {
-	status = "okay";
-
-	/* pca9548 -> NVMe9 to 16 */
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		bus6_mux215: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		bus6_mux216: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		bus6_mux217: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus6_mux218: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		bus6_mux219: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		bus6_mux220: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		bus6_mux221: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		bus6_mux222: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-
-};
-
-&i2c8 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	/* pca9545 Riser ->
-	*	PCIe x8  Slot3
-	*	PCIe x16 slot4
-	*	PCIe x8  slot5
-	*	I2C BMC RISER PCA9554
-	*	BMC SCL/SDA PCA9554
-	*	PCA9554
-	*/
-
-	/* pca9545 ->
-	*	PCIe x16 Slot1
-	*	PCIe x8  slot2
-	*	PEX8748
-	*/
-
-	pca9545riser@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus9_mux231: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus0-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus0";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux232: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus1-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus1";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux233: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus9_mux234: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-
-	pca9545@71 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus9_mux235: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus2-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus2";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux236: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus3-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus3";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux237: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus9_mux238: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	/* pca9545 Riser ->
-	* 	PCIe x8  Slot8
-	* 	PCIe x16 slot9
-	* 	PCIe x8  slot10
-	* 	I2C BMC RISER PCA9554
-	* 	BMC SCL/SDA PCA9554
-	* 	PCA9554
-	*/
-
-	/* pca9545 ->
-	*	PCIe x16 Slot1
-	*	PCIe x8  slot2
-	*	PEX8748
-	*/
-
-	pca9545riser@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus10_mux239: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus4-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus4";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux240: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus5-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus5";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux241: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus10_mux242: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-
-	pca9545@71 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus10_mux243: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus6-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus6";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux244: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus7-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus7";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux245: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus10_mux246: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	/* TPM */
-	/* RTC RX8900CE */
-	/* FPGA for power sequence */
-	/* TMP275A */
-	/* TMP275A */
-	/* EMC1462 */
-
-	tpm@57 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x57>;
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-
-	/* chip emc1462 use emc1403 driver */
-	emc1403@4c {
-		compatible = "smsc,emc1403";
-		reg = <0x4c>;
-	};
-
-};
-
-&i2c12 {
-	status = "okay";
-
-	/* pca9545 ->
-	*	SAS BP1
-	*	SAS BP2
-	*	NVMe BP
-	*	M.2 riser
-	*/
-
-	pca9545@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus12_mux247: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		bus12_mux248: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		bus12_mux249: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		bus12_mux250: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			tmp275@48 {
-				compatible = "ti,tmp275";
-				reg = <0x48>;
-			};
-		};
-
-	};
-
-};
-
-&i2c13 {
-	status = "okay";
-
-	/* pca9548 ->
-	*	NVMe BP
-	*	NVMe HDD17 to 24
-	*/
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		bus13_mux251: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		bus13_mux252: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		bus13_mux253: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus13_mux254: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		bus13_mux255: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		bus13_mux256: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		bus13_mux257: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		bus13_mux258: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&adc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default
-			&pinctrl_adc1_default
-			&pinctrl_adc2_default
-			&pinctrl_adc3_default
-			&pinctrl_adc4_default
-			&pinctrl_adc5_default
-			&pinctrl_adc6_default
-			&pinctrl_adc7_default
-			&pinctrl_adc8_default
-			&pinctrl_adc9_default
-			&pinctrl_adc10_default
-			&pinctrl_adc11_default
-			&pinctrl_adc12_default
-			&pinctrl_adc13_default
-			&pinctrl_adc14_default
-			&pinctrl_adc15_default>;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	aspeed,alt-boot;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-#include "ibm-power9-dual.dtsi"
-
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
deleted file mode 100644
index bbf864f84d37..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
+++ /dev/null
@@ -1,978 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Swift BMC";
-	compatible = "ibm,swift-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		event-air-water {
-			label = "air-water";
-			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(B, 5)>;
-		};
-
-		event-checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-
-		event-ps0-presence {
-			label = "ps0-presence";
-			gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(R, 7)>;
-		};
-
-		event-ps1-presence {
-			label = "ps1-presence";
-			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(N, 0)>;
-		};
-
-		event-oppanel-presence {
-			label = "oppanel-presence";
-			gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(A, 7)>;
-		};
-
-		event-opencapi-riser-presence {
-			label = "opencapi-riser-presence";
-			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(I, 0)>;
-		};
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 12>;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		event-scm0-presence {
-			label = "scm0-presence";
-			gpios = <&pca9552 6 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		event-scm1-presence {
-			label = "scm1-presence";
-			gpios = <&pca9552 7 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-		};
-
-		event-cpu0vrm-presence {
-			label = "cpu0vrm-presence";
-			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
-			linux,code = <12>;
-		};
-
-		event-cpu1vrm-presence {
-			label = "cpu1vrm-presence";
-			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
-			linux,code = <13>;
-		};
-
-		event-fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <5>;
-		};
-
-		event-fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		event-fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-		};
-
-		event-fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
-			linux,code = <8>;
-		};
-
-		event-fanboost-presence {
-			label = "fanboost-presence";
-			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
-			linux,code = <9>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		fan0 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
-		};
-
-		fan1 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
-		};
-
-		fan2 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
-		};
-
-		fan3 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
-		};
-
-		fanboost {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
-		};
-
-		front-fault {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
-		};
-
-		front-power {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
-		};
-
-		front-id {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
-		};
-
-		rear-fault {
-			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		rear-id {
-			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		no-gpio-delays;
-
-		clock-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
-	};
-
-	iio-hwmon-dps310 {
-		compatible = "iio-hwmon";
-		io-channels = <&dps 0>;
-	};
-
-};
-
-&fmc {
-	status = "okay";
-
-	flash@0 {
-		status = "okay";
-		label = "bmc";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x7F80000>;
-				label = "obmc-ubi";
-			};
-		};
-	};
-
-	flash@1 {
-		status = "okay";
-		label = "alt-bmc";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "alt-u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "alt-u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x7F80000>;
-				label = "alt-obmc-ubi";
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart2 {
-	/* APSS */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&mac0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	use-ncsi;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-};
-
-&i2c2 {
-	status = "okay";
-
-	/* MUX ->
-	 *    Samtec 1
-	 *    Samtec 2
-	 */
-};
-
-&i2c3 {
-	status = "okay";
-
-	max31785@52 {
-		compatible = "maxim,max31785a";
-		reg = <0x52>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fan@0 {
-			compatible = "pmbus-fan";
-			reg = <0>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@1 {
-			compatible = "pmbus-fan";
-			reg = <1>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@2 {
-			compatible = "pmbus-fan";
-			reg = <2>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@3 {
-			compatible = "pmbus-fan";
-			reg = <3>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@4 {
-			compatible = "pmbus-fan";
-			reg = <4>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-	};
-
-	pca0: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	power-supply@68 {
-		compatible = "ibm,cffps2";
-		reg = <0x68>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps2";
-		reg = <0x69>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	dps: dps310@76 {
-		compatible = "infineon,dps310";
-		reg = <0x76>;
-		#io-channel-cells = <0>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	si7021a20@20 {
-		compatible = "si,si7021a20";
-		reg = <0x20>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	pca1: pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	pca9552: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
-			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
-			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
-			"P9_SCM0_PRES",	"P9_SCM1_PRES",
-			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
-			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
-			"PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N",
-			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	ucd90160@64 {
-		compatible = "ti,ucd90160";
-		reg = <0x64>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	ir35221@71 {
-		compatible = "infineon,ir35221";
-		reg = <0x71>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-	pca2: pca9539@74 {
-		compatible = "nxp,pca9539";
-		reg = <0x74>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-		};
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	ir35221@71 {
-		compatible = "infineon,ir35221";
-		reg = <0x71>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-	pca3: pca9539@74 {
-		compatible = "nxp,pca9539";
-		reg = <0x74>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-		};
-	};
-};
-
-&i2c11 {
-	/* MUX
-	 *   -> PCIe Slot 0
-	 *   -> PCIe Slot 1
-	 *   -> PCIe Slot 2
-	 *   -> PCIe Slot 3
-	 */
-	status = "okay";
-};
-
-&i2c12 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	aspeed,alt-boot;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&sdmmc {
-       status = "okay";
-};
-
-&sdhci1 {
-       status = "okay";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_sd2_default>;
-};
-
-#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
new file mode 100644
index 000000000000..0f0b5b707654
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ASPEED) += \
+	aspeed-ast2500-evb.dtb \
+	aspeed-ast2600-evb-a1.dtb \
+	aspeed-ast2600-evb.dtb \
+	aspeed-bmc-amd-daytonax.dtb \
+	aspeed-bmc-amd-ethanolx.dtb \
+	aspeed-bmc-ampere-mtjade.dtb \
+	aspeed-bmc-ampere-mtjefferson.dtb \
+	aspeed-bmc-ampere-mtmitchell.dtb \
+	aspeed-bmc-arm-stardragon4800-rep2.dtb \
+	aspeed-bmc-asrock-e3c246d4i.dtb \
+	aspeed-bmc-asrock-e3c256d4i.dtb \
+	aspeed-bmc-asrock-romed8hm3.dtb \
+	aspeed-bmc-asrock-spc621d8hm3.dtb \
+	aspeed-bmc-asrock-x570d4u.dtb \
+	aspeed-bmc-asus-x4tf.dtb \
+	aspeed-bmc-bytedance-g220a.dtb \
+	aspeed-bmc-delta-ahe50dc.dtb \
+	aspeed-bmc-facebook-bletchley.dtb \
+	aspeed-bmc-facebook-catalina.dtb \
+	aspeed-bmc-facebook-clemente.dtb \
+	aspeed-bmc-facebook-cmm.dtb \
+	aspeed-bmc-facebook-darwin.dtb \
+	aspeed-bmc-facebook-elbert.dtb \
+	aspeed-bmc-facebook-fuji-data64.dtb \
+	aspeed-bmc-facebook-fuji.dtb \
+	aspeed-bmc-facebook-galaxy100.dtb \
+	aspeed-bmc-facebook-greatlakes.dtb \
+	aspeed-bmc-facebook-harma.dtb \
+	aspeed-bmc-facebook-minerva.dtb \
+	aspeed-bmc-facebook-minipack.dtb \
+	aspeed-bmc-facebook-santabarbara.dtb \
+	aspeed-bmc-facebook-tiogapass.dtb \
+	aspeed-bmc-facebook-wedge40.dtb \
+	aspeed-bmc-facebook-wedge100.dtb \
+	aspeed-bmc-facebook-wedge400-data64.dtb \
+	aspeed-bmc-facebook-wedge400.dtb \
+	aspeed-bmc-facebook-yamp.dtb \
+	aspeed-bmc-facebook-yosemitev2.dtb \
+	aspeed-bmc-facebook-yosemite4.dtb \
+	aspeed-bmc-ibm-blueridge.dtb \
+	aspeed-bmc-ibm-bonnell.dtb \
+	aspeed-bmc-ibm-everest.dtb \
+	aspeed-bmc-ibm-fuji.dtb \
+	aspeed-bmc-ibm-rainier.dtb \
+	aspeed-bmc-ibm-rainier-1s4u.dtb \
+	aspeed-bmc-ibm-rainier-4u.dtb \
+	aspeed-bmc-ibm-sbp1.dtb \
+	aspeed-bmc-ibm-system1.dtb \
+	aspeed-bmc-intel-s2600wf.dtb \
+	aspeed-bmc-inspur-fp5280g2.dtb \
+	aspeed-bmc-inspur-nf5280m6.dtb \
+	aspeed-bmc-inspur-on5263m5.dtb \
+	aspeed-bmc-lenovo-hr630.dtb \
+	aspeed-bmc-lenovo-hr855xg2.dtb \
+	aspeed-bmc-microsoft-olympus.dtb \
+	aspeed-bmc-nvidia-gb200nvl-bmc.dtb \
+	aspeed-bmc-opp-lanyang.dtb \
+	aspeed-bmc-opp-mowgli.dtb \
+	aspeed-bmc-opp-nicole.dtb \
+	aspeed-bmc-opp-palmetto.dtb \
+	aspeed-bmc-opp-romulus.dtb \
+	aspeed-bmc-opp-tacoma.dtb \
+	aspeed-bmc-opp-vesnin.dtb \
+	aspeed-bmc-opp-witherspoon.dtb \
+	aspeed-bmc-opp-zaius.dtb \
+	aspeed-bmc-portwell-neptune.dtb \
+	aspeed-bmc-qcom-dc-scm-v1.dtb \
+	aspeed-bmc-quanta-q71l.dtb \
+	aspeed-bmc-quanta-s6q.dtb \
+	aspeed-bmc-supermicro-x11spi.dtb \
+	aspeed-bmc-inventec-starscream.dtb \
+	aspeed-bmc-inventec-transformers.dtb \
+	aspeed-bmc-tyan-s7106.dtb \
+	aspeed-bmc-tyan-s8036.dtb \
+	aspeed-bmc-ufispace-ncplite.dtb \
+	aspeed-bmc-vegman-n110.dtb \
+	aspeed-bmc-vegman-rx20.dtb \
+	aspeed-bmc-vegman-sx20.dtb
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dts
index a497dd135491..a497dd135491 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dts
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dts
index d0a5c2ff0fec..f34a2b1ec2f0 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dts
@@ -5,7 +5,7 @@
 
 / {
 	model = "AST2600 A1 EVB";
-	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600";
+	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600-evb", "aspeed,ast2600";
 
 	/delete-node/regulator-vcc-sdhci0;
 	/delete-node/regulator-vcc-sdhci1;
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
index c698e6538269..de83c0eb1d6e 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "AST2600 EVB";
-	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600";
+	compatible = "aspeed,ast2600-evb", "aspeed,ast2600";
 
 	aliases {
 		serial4 = &uart5;
@@ -182,6 +182,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
+		spi-rx-bus-width = <4>;
 		spi-max-frequency = <50000000>;
 #include "openbmc-flash-layout-64.dtsi"
 	};
@@ -196,6 +197,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "pnor";
+		spi-rx-bus-width = <4>;
 		spi-max-frequency = <100000000>;
 	};
 };
@@ -207,11 +209,6 @@
 
 &i2c0 {
 	status = "okay";
-
-	temp@2e {
-		compatible = "adi,adt7490";
-		reg = <0x2e>;
-	};
 };
 
 &i2c1 {
@@ -240,10 +237,26 @@
 
 &i2c7 {
 	status = "okay";
+
+	temp@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
 };
 
 &i2c8 {
 	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
 };
 
 &i2c9 {
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dts
new file mode 100644
index 000000000000..64bb9bf92de2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dts
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "AMD DaytonaX BMC";
+	compatible = "amd,daytonax-bmc", "aspeed,ast2500";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-fault {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		led-identify {
+			gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>,
+			<&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&uart1 {
+	//Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		&pinctrl_rxd1_default
+		&pinctrl_nrts1_default
+		&pinctrl_ndtr1_default
+		&pinctrl_ndsr1_default
+		&pinctrl_ncts1_default
+		&pinctrl_ndcd1_default
+		&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	//BMC Console
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x3f8>;
+	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"","","led-fault","led-identify","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"id-button","","","","","","","",
+	/*D0-D7*/	"","","ASSERT_BMC_READY","","","","","",
+	/*E0-E7*/	"reset-button","reset-control","power-button","power-control","",
+			"power-good","power-ok","",
+	/*F0-F7*/	"","","","","","","BATTERY_DETECT","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"FM_BMC_READ_SPD_TEMP","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm1_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default
+		&pinctrl_pwm4_default
+		&pinctrl_pwm5_default
+		&pinctrl_pwm6_default
+		&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@14 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@15 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-ethanolx.dts
index 6406a0f080ee..6bded774c457 100644
--- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-ethanolx.dts
@@ -5,6 +5,7 @@
 
 #include "aspeed-g5.dtsi"
 #include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "AMD EthanolX BMC";
@@ -58,10 +59,22 @@
 	flash@0 {
 		status = "okay";
 		m25p,fast-read;
+		label = "bmc";
 		#include "openbmc-flash-layout.dtsi"
 	};
 };
 
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
 
 &mac0 {
 	status = "okay";
@@ -78,7 +91,9 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default>;
+		     &pinctrl_rxd1_default
+		     &pinctrl_nrts1_default
+		     &pinctrl_ncts1_default>;
 };
 
 &uart5 {
@@ -160,7 +175,7 @@
 &i2c3 {
 	status = "okay";
 	eeprom@50 {
-		compatible = "atmel,24c256";
+		compatible = "atmel,24c128";
 		reg = <0x50>;
 		pagesize = <64>;
 	};
@@ -261,6 +276,12 @@
 	status = "okay";
 };
 
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x3f8>;
+	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &pwm_tacho {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
index 82a6f14a45f0..263702599767 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
@@ -49,6 +49,11 @@
 		 */
 		i2c80 = &nvme_m2_0;
 		i2c81 = &nvme_m2_1;
+
+		/*
+		 *  i2c bus 82 assigned to OCP slot
+		 */
+		i2c82 = &ocpslot;
 	};
 
 	chosen {
@@ -97,101 +102,6 @@
 		};
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		event-shutdown-ack {
-			label = "SHUTDOWN_ACK";
-			gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(G, 2)>;
-		};
-
-		event-reboot-ack {
-			label = "REBOOT_ACK";
-			gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 3)>;
-		};
-
-		event-s0-overtemp {
-			label = "S0_OVERTEMP";
-			gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(G, 3)>;
-		};
-
-		event-s0-hightemp {
-			label = "S0_HIGHTEMP";
-			gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 0)>;
-		};
-
-		event-s0-cpu-fault {
-			label = "S0_CPU_FAULT";
-			gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
-			linux,code = <ASPEED_GPIO(J, 1)>;
-		};
-
-		event-s0-scp-auth-fail {
-			label = "S0_SCP_AUTH_FAIL";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-
-		event-s1-scp-auth-fail {
-			label = "S1_SCP_AUTH_FAIL";
-			gpios = <&gpio ASPEED_GPIO(Z, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 5)>;
-		};
-
-		event-s1-overtemp {
-			label = "S1_OVERTEMP";
-			gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 6)>;
-		};
-
-		event-s1-hightemp {
-			label = "S1_HIGHTEMP";
-			gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(AB, 0)>;
-		};
-
-		event-s1-cpu-fault {
-			label = "S1_CPU_FAULT";
-			gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
-			linux,code = <ASPEED_GPIO(Z, 1)>;
-		};
-
-		event-id {
-			label = "ID_BUTTON";
-			gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Q, 5)>;
-		};
-
-		event-psu1-vin-good {
-			label = "PSU1_VIN_GOOD";
-			gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(H, 4)>;
-		};
-
-		event-psu2-vin-good {
-			label = "PSU2_VIN_GOOD";
-			gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(H, 5)>;
-		};
-
-		event-psu1-present {
-			label = "PSU1_PRESENT";
-			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(I, 0)>;
-		};
-
-		event-psu2-present {
-			label = "PSU2_PRESENT";
-			gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(I, 1)>;
-		};
-
-	};
-
 	gpioA0mux: mux-controller {
 		compatible = "gpio-mux";
 		#mux-control-cells = <0>;
@@ -437,6 +347,10 @@
 
 &i2c0 {
 	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
 };
 
 &i2c1 {
@@ -445,6 +359,14 @@
 
 &i2c2 {
 	status = "okay";
+	smpro@4f {
+		compatible = "ampere,smpro";
+		reg = <0x4f>;
+	};
+	smpro@4e {
+		compatible = "ampere,smpro";
+		reg = <0x4e>;
+	};
 };
 
 &i2c3 {
@@ -503,6 +425,17 @@
 		reg = <0x70>;
 		i2c-mux-idle-disconnect;
 
+		ocpslot: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ocpslot_temp: temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
 		nvmeslot_0_7: i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -755,10 +688,6 @@
 	memory-region = <&gfx_memory>;
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &pwm_tacho {
 	status = "okay";
 	pinctrl-names = "default";
@@ -843,49 +772,63 @@
 
 &gpio {
 	gpio-line-names =
-	/*A0-A7*/	"","","","S0_BMC_SPECIAL_BOOT","","","","",
-	/*B0-B7*/	"BMC_SELECT_EEPROM","","","",
-			"POWER_BUTTON","","","",
+	/*A0-A7*/	"","","","host0-special-boot","","","","",
+	/*B0-B7*/	"i2c-backup-sel","","","",
+			"power-button","presence-cpu0","","",
 	/*C0-C7*/	"","","","","","","","",
 	/*D0-D7*/	"","","","","","","","",
 	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD",
-			"S1_DDR_SAVE","","",
-	/*G0-G7*/	"host0-ready","SHD_REQ_L","","S0_OVERTEMP_L","","",
-			"","",
-	/*H0-H7*/	"","","","","PSU1_VIN_GOOD","PSU2_VIN_GOOD","","",
-	/*I0-I7*/	"PSU1_PRESENT","PSU2_PRESENT","S1_BMC_SPECIAL_BOOT",
-			"","","","","",
-	/*J0-J7*/	"S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","",
-			"","","","",
+	/*F0-F7*/	"ps0-pgood","ps1-pgood","power-chassis-control","s0-ddr-save",
+			"power-chassis-good", "s1-ddr-save","","",
+	/*G0-G7*/	"host0-ready","host0-shd-req-n","host0-shd-ack-n",
+			"s0-overtemp-n","","","","",
+	/*H0-H7*/	"uart1-mode1","uart2-mode1","uart3-mode1","uart4-mode1",
+			"ps0-vin-good","ps1-vin-good","","i2c6-reset-n",
+	/*I0-I7*/	"presence-ps0","presence-ps1","s1-special-boot","","","","","",
+	/*J0-J7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","","","","",
 	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/       "","","","BMC_SYSRESET_L","SPI_AUTH_FAIL_L","","","",
-	/*M0-M7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","host0-sysreset-n","s0-spi-auth-fail-n","","","",
+	/*M0-M7*/	"","","","","s0-i2c9-alert-n","s1-i2c9-alert-n","","",
 	/*N0-N7*/	"","","","","","","","",
 	/*O0-O7*/	"","","","","","","","",
 	/*P0-P7*/	"","","","","","","","",
-	/*Q0-Q7*/	"","","","","","UID_BUTTON","","",
-	/*R0-R7*/	"","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN",
-			"OCP_MAIN_PWREN","RESET_BUTTON","","",
-	/*S0-S7*/	"","","","","rtc-battery-voltage-read-enable","","","",
+	/*Q0-Q7*/	"","","","","","identify-button","led-identify","",
+	/*R0-R7*/	"","","ext-hightemp-n","","ocp-main-pwren","reset-button","","",
+	/*S0-S7*/	"s0-vr-hot-n","s1-vr-hot-n","","",
+			"rtc-battery-voltage-read-enable","vr-pmbus-sel-n","","",
 	/*T0-T7*/	"","","","","","","","",
 	/*U0-U7*/	"","","","","","","","",
 	/*V0-V7*/	"","","","","","","","",
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"S0_BMC_PLIMIT","S1_FAULT_L","S1_FW_BOOT_OK","","",
-			"S1_SCP_AUTH_FAIL_L","S1_OVERTEMP_L","",
+	/*Y0-Y7*/	"","","","bmc-vga-en-n","","","","",
+	/*Z0-Z7*/	"s0-plimit","s1-fault-alert","s1-fw-boot-ok","s0-rtc-lock","",
+			"s1-sys-auth-failure-n","s1-overtemp-n","",
 	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"S1_HIGHTEMP_L","S1_BMC_PLIMIT","S0_BMC_DDR_ADDR",
-			"S1_BMC_DDR_ADR","","","","",
-	/*AC0-AC7*/	"SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",
-			"BMC_OCP_PG";
+	/*AB0-AB7*/	"s1-hightemp-n","s1-plimit","s0-ddr-addr","s1-ddr-addr","","",
+			"","",
+	/*AC0-AC7*/	"sys-pwr-gd","","spi0-program-sel","spi0-backup-sel","bmc-ok",
+			"","presence-cpu1","ocp-pgood";
 
 	i2c4-o-en-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
-		line-name = "BMC_I2C4_O_EN";
+		line-name = "i2c4-o-en";
+	};
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+
+	bmc-ready-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AC, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "bmc-ready";
 	};
 };
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
new file mode 100644
index 000000000000..53b4372f1a08
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
@@ -0,0 +1,622 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright 2024 Ampere Computing LLC.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt. Jefferson BMC";
+	compatible = "ampere,mtjefferson-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c20 = &i2c4_bus70_chn0;
+		i2c22 = &i2c4_bus70_chn2;
+
+		/*
+		 *  I2C OCP alias port
+		 */
+		i2c30 = &ocpslot;
+
+		/*
+		 *  I2C NVMe alias port
+		 */
+		i2c48 = &nvmeslot_0;
+		i2c49 = &nvmeslot_1;
+		i2c50 = &nvmeslot_2;
+		i2c51 = &nvmeslot_3;
+		i2c52 = &nvmeslot_4;
+		i2c53 = &nvmeslot_5;
+		i2c54 = &nvmeslot_6;
+		i2c55 = &nvmeslot_7;
+		i2c56 = &nvmeslot_8;
+		i2c57 = &nvmeslot_9;
+		i2c58 = &nvmeslot_10;
+		i2c59 = &nvmeslot_11;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	voltage_mon_reg: voltage-mon-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ltc2497_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-bmc-ready {
+			gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>;
+		};
+
+		led-sw-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-identify {
+			gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fault {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels =   <&adc0 0>, <&adc0 1>, <&adc0 2>,
+				<&adc_i2c_2 0>, <&adc_i2c_2 1>,
+				<&adc_i2c_2 2>, <&adc_i2c_2 3>,
+				<&adc_i2c_2 4>, <&adc_i2c_2 5>,
+				<&adc_i2c_2 6>, <&adc_i2c_2 7>,
+				<&adc_i2c_2 8>, <&adc_i2c_2 9>,
+				<&adc_i2c_2 10>, <&adc_i2c_2 11>,
+				<&adc_i2c_2 12>, <&adc_i2c_2 13>,
+				<&adc_i2c_2 14>, <&adc_i2c_2 15>,
+				<&adc_i2c_0 0>, <&adc_i2c_0 1>,
+				<&adc_i2c_0 2>, <&adc_i2c_0 3>,
+				<&adc_i2c_0 4>, <&adc_i2c_0 5>,
+				<&adc_i2c_0 6>, <&adc_i2c_0 7>,
+				<&adc_i2c_0 8>, <&adc_i2c_0 9>,
+				<&adc_i2c_0 10>, <&adc_i2c_0 11>,
+				<&adc_i2c_0 12>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <1000000>;
+	multi-master;
+	mctp-controller;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c4_bus70_chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c256";
+				reg = <0x52>;
+				pagesize = <32>;
+			};
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+			temperature-sensor@4a {
+				compatible = "ti,tmp75";
+				reg = <0x4a>;
+			};
+			temperature-sensor@4b {
+				compatible = "ti,tmp464";
+				reg = <0x4b>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				channel@0 {
+					reg = <0x0>;
+					status = "disabled";
+				};
+				channel@1 {
+					reg = <0x1>;
+					status = "disabled";
+				};
+				channel@2 {
+					reg = <0x2>;
+					status = "disabled";
+				};
+				channel@3 {
+					reg = <0x3>;
+					status = "disabled";
+				};
+				channel@4 {
+					reg = <0x4>;
+				};
+			};
+			temperature-sensor@4d {
+				compatible = "ti,tmp75";
+				reg = <0x4d>;
+			};
+			temperature-sensor@4e {
+				compatible = "ti,tmp75";
+				reg = <0x4e>;
+			};
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+			temperature-sensor@28 {
+				compatible = "nuvoton,nct7802";
+				reg = <0x28>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel@1 { /* RTD1 */
+					reg = <1>;
+					sensor-type = "temperature";
+					temperature-mode = "thermistor";
+				};
+			};
+			adc_i2c_0: adc@14 {
+				compatible = "lltc,ltc2497";
+				reg = <0x14>;
+				vref-supply = <&voltage_mon_reg>;
+				#io-channel-cells = <1>;
+			};
+		};
+
+		i2c4_bus70_chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			adc_i2c_2: adc@14 {
+				compatible = "lltc,ltc2497";
+				reg = <0x14>;
+				vref-supply = <&voltage_mon_reg>;
+				#io-channel-cells = <1>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_8: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_9: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_10: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_11: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				ocpslot: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					ocpslot_temp: temperature-sensor@1f {
+						compatible = "ti,tmp421";
+						reg = <0x1f>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						channel@0 {
+							reg = <0x0>;
+							status = "disabled";
+						};
+						channel@1 {
+							reg = <0x1>;
+						};
+					};
+				};
+
+				nvmeslot_0: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_1: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_2: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_3: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	fan-controller@5c {
+		compatible = "onnn,adt7462";
+		reg = <0x5c>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+
+	temperature-sensor@18 {
+		compatible = "jedec,jc-42.4-temp";
+		reg = <0x18>;
+	};
+
+	temperature-sensor@1a {
+		compatible = "jedec,jc-42.4-temp";
+		reg = <0x1a>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	bmc_ast2600_cpu: temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	gpio_expander1: gpio-expander@22 {
+		compatible = "nxp,pca9535";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"presence-ocp1","presence-ocp2",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","";
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","cpu-type-detect","i2c2-reset-n","i2c6-reset-n","i2c5-reset-n",
+	/*B0-B7*/	"","","","","host0-sysreset-n","host0-pmin-n","fru-rd-complete",
+			"chassis-id-sel",
+	/*C0-C7*/	"s0-vrd-fault-n","","bmc-debug-mode","","cpld-3v3-irq-n","","vrd-sel",
+			"spd-sel",
+	/*D0-D7*/	"presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
+			"","","","",
+	/*E0-E7*/	"eth-phy-rst-n","eth-phy-int-n","","","","","","",
+	/*F0-F7*/	"s0-pcp-oc-warn-n","","power-chassis-control",
+			"cpu-bios-recover","s0-heartbeat","hs-scout-proc-hot","s0-vr-hot-n","",
+	/*G0-G7*/	"","","hsc-12vmain-alt1-n","","","bp-cpld-program-en","led-fp-sta-gr",
+			"led-fp-sta-amb",
+	/*H0-H7*/	"jtag-program-sel","jtag-cmpl2","wd-disable-n","power-chassis-good","","",
+			"","",
+	/*I0-I7*/	"","","","","","","power-button","rtc-battery-voltage-read-enable",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","reset-button","","","",
+	/*M0-M7*/	"nmi-n","s0-ddr-save","soc-spi-nor-access","presence-cpu0","s0-rtc-lock",
+			"","","",
+	/*N0-N7*/	"hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
+			"jtag-dbgr-prsnt-n","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"ps0-ac-loss-n","ps1-ac-loss-n","","","led-fault","user-mode","jtag-srst-n",
+			"led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","identify-button","led-identify","","spi-nor-access","host0-ready","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n",
+			"host0-shd-ack-n","s0-overtemp-n",
+	/*W0-W7*/	"ocp-aux-pwren","ocp-main-pwren","ocp-pgood","",
+			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","vrd-prg-en-n","","","","host0-special-boot",
+	/*Z0-Z7*/	"","ps0-pgood","ps1-pgood","","","","","";
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","s0-soc-pgood","vga-ft-press-n","emmc-rst-n","s01-uart1-sel",
+	/*18C0-18C7*/	"uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
+			"","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
new file mode 100644
index 000000000000..2b336aa0146d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
@@ -0,0 +1,1061 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2022, Ampere Computing LLC
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt.Mitchell BMC";
+	compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial7 = &uart8;
+		serial8 = &uart9;
+
+		/*
+		 * I2C temperature alias port
+		 */
+		i2c20 = &i2c4_bus70_chn0;
+		i2c21 = &i2c4_bus70_chn1;
+		i2c22 = &i2c4_bus70_chn2;
+		i2c23 = &i2c4_bus70_chn3;
+
+		/*
+		 *  i2c bus 30-31 assigned to OCP slot 0-1
+		 */
+		i2c30 = &ocpslot_0;
+		i2c31 = &ocpslot_1;
+
+		/*
+		 *  i2c bus 32-33 assigned to Riser slot 0-1
+		 */
+		i2c32 = &i2c_riser0;
+		i2c33 = &i2c_riser1;
+
+		/*
+		 *  i2c bus 38-39 assigned to FRU on Riser slot 0-1
+		 */
+		i2c38 = &i2c_riser0_chn_0;
+		i2c39 = &i2c_riser1_chn_0;
+
+		/*
+		 *  I2C NVMe alias port
+		 */
+		i2c100 = &backplane_0;
+		i2c48 = &nvmeslot_0;
+		i2c49 = &nvmeslot_1;
+		i2c50 = &nvmeslot_2;
+		i2c51 = &nvmeslot_3;
+		i2c52 = &nvmeslot_4;
+		i2c53 = &nvmeslot_5;
+		i2c54 = &nvmeslot_6;
+		i2c55 = &nvmeslot_7;
+
+		i2c101 = &backplane_1;
+		i2c56 = &nvmeslot_8;
+		i2c57 = &nvmeslot_9;
+		i2c58 = &nvmeslot_10;
+		i2c59 = &nvmeslot_11;
+		i2c60 = &nvmeslot_12;
+		i2c61 = &nvmeslot_13;
+		i2c62 = &nvmeslot_14;
+		i2c63 = &nvmeslot_15;
+
+		i2c102 = &backplane_2;
+		i2c64 = &nvmeslot_16;
+		i2c65 = &nvmeslot_17;
+		i2c66 = &nvmeslot_18;
+		i2c67 = &nvmeslot_19;
+		i2c68 = &nvmeslot_20;
+		i2c69 = &nvmeslot_21;
+		i2c70 = &nvmeslot_22;
+		i2c71 = &nvmeslot_23;
+
+		i2c80 = &nvme_m2_0;
+		i2c81 = &nvme_m2_1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		/*
+		 * Use gpio-leds to configure GPIOW5 (bmc-ready) pin to be reseted when
+		 * watchdog timeout.
+		 */
+		led-bmc-ready {
+			gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>;
+		};
+
+		led-sw-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-identify {
+			gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fault {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fan-fault {
+			gpios = <&gpio_expander1 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-psu-fault {
+			gpios = <&gpio_expander1 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	voltage_mon_reg: voltage-mon-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ltc2497_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpioI5mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(I, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	adc0mux: adc0mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc1mux: adc1mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc2mux: adc2mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc3mux: adc3mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc4mux: adc4mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc5mux: adc5mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc6mux: adc6mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc7mux: adc7mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc8mux: adc8mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 8>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc9mux: adc9mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 9>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc10mux: adc10mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 10>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc11mux: adc11mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 11>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc12mux: adc12mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 12>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc13mux: adc13mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 13>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc14mux: adc14mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 14>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc15mux: adc15mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 15>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels =	<&adc0mux 0>, <&adc0mux 1>,
+				<&adc1mux 0>, <&adc1mux 1>,
+				<&adc2mux 0>, <&adc2mux 1>,
+				<&adc3mux 0>, <&adc3mux 1>,
+				<&adc4mux 0>, <&adc4mux 1>,
+				<&adc5mux 0>, <&adc5mux 1>,
+				<&adc6mux 0>, <&adc6mux 1>,
+				<&adc7mux 0>, <&adc7mux 1>,
+				<&adc8mux 0>, <&adc8mux 1>,
+				<&adc9mux 0>, <&adc9mux 1>,
+				<&adc10mux 0>, <&adc10mux 1>,
+				<&adc11mux 0>, <&adc11mux 1>,
+				<&adc12mux 0>, <&adc12mux 1>,
+				<&adc13mux 0>, <&adc13mux 1>,
+				<&adc14mux 0>, <&adc14mux 1>,
+				<&adc15mux 0>, <&adc15mux 1>,
+				<&adc_i2c_1 0>, <&adc_i2c_1 1>,
+				<&adc_i2c_1 2>, <&adc_i2c_1 3>,
+				<&adc_i2c_1 4>, <&adc_i2c_1 5>,
+				<&adc_i2c_1 6>, <&adc_i2c_1 7>,
+				<&adc_i2c_1 8>, <&adc_i2c_1 9>,
+				<&adc_i2c_1 10>, <&adc_i2c_1 11>,
+				<&adc_i2c_1 12>, <&adc_i2c_1 13>,
+				<&adc_i2c_1 14>, <&adc_i2c_1 15>,
+				<&adc0 0>, <&adc0 1>,
+				<&adc0 2>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	temperature-sensor@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	psu@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <1000000>;
+	multi-master;
+	mctp-controller;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	adc_i2c_0: adc@14 {
+		compatible = "lltc,ltc2497";
+		reg = <0x14>;
+		vref-supply = <&voltage_mon_reg>;
+		#io-channel-cells = <1>;
+	 };
+
+	adc_i2c_1: adc@16 {
+		compatible = "lltc,ltc2497";
+		reg = <0x16>;
+		vref-supply = <&voltage_mon_reg>;
+		#io-channel-cells = <1>;
+	 };
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c4_bus70_chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			outlet_temp1: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			psu1_inlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			pcie_zone_temp1: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			psu0_inlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			pcie_zone_temp2: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			outlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			mb_inlet_temp1: temperature-sensor@7c {
+				compatible = "microchip,emc1413";
+				reg = <0x7c>;
+			};
+			mb_inlet_temp2: temperature-sensor@4c {
+				compatible = "microchip,emc1413";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		ocpslot_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ocpslot_0_temp: temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		ocpslot_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			ocpslot_1_temp: temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c_riser0: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				i2c_riser0_chn_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					eeprom@50 {
+						compatible = "atmel,24c02";
+						reg = <0x50>;
+						pagesize = <16>;
+					};
+				};
+			};
+		};
+
+		i2c_riser1: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				i2c_riser1_chn_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					eeprom@50 {
+						compatible = "atmel,24c02";
+						reg = <0x50>;
+						pagesize = <16>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+	};
+
+	gpio@77 {
+		compatible = "nxp,pca9539";
+		reg = <0x77>;
+		gpio-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"ext-vref-sel","","presence-hdd-bp5-n","presence-hdd-bp6-n",
+		"","bmc-riser-en-n","bmc-ocp1-en-n","bmc-ocp0-en-n",
+		"","","","",
+		"","","","";
+
+		bmc-ocp0-en-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "bmc-ocp0-en-n";
+		};
+	};
+
+	fan-controller0@20 {
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	fan-controller1@2f {
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		backplane_1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_8: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_9: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_10: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_11: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+				nvmeslot_12: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_13: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_14: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_15: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			tmp432@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+		};
+
+		backplane_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_16: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_17: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_18: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_19: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+				nvmeslot_20: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_21: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_22: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_23: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			tmp432@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+		};
+
+		backplane_0: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+				nvmeslot_4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			tmp432@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvme_m2_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+
+				nvme_m2_1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+			};
+		};
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	bmc_ast2600_cpu: temperature-sensor@35 {
+		compatible = "ti,tmp175";
+		reg = <0x35>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	gpio_expander1: gpio-expander@22 {
+		compatible = "nxp,pca9535";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"fan-fault","psu-fault",
+			"","",
+			"","",
+			"gpi0","gpi1",
+			"","",
+			"","",
+			"","",
+			"","";
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","i2c2-reset-n","i2c6-reset-n","i2c4-reset-n",
+	/*B0-B7*/	"","","","","host0-sysreset-n","host0-pmin-n","","",
+	/*C0-C7*/	"s0-vrd-fault-n","s1-vrd-fault-n","bmc-debug-mode","",
+			"irq-n","","vrd-sel","spd-sel",
+	/*D0-D7*/	"presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
+			"","bmc-ncsi-txen","","",
+	/*E0-E7*/	"","eth-phy-int-n","clk50m-bmc-ncsi","","","","","",
+	/*F0-F7*/	"s0-pcp-oc-warn-n","s1-pcp-oc-warn-n","power-chassis-control",
+			"cpu-bios-recover","s0-heartbeat","hs-csout-prochot",
+			"s0-vr-hot-n","s1-vr-hot-n",
+	/*G0-G7*/	"","","hsc-12vmain-alt1-n","","","","","",
+	/*H0-H7*/	"jtag-program-sel","fpga-program-b","wd-disable-n",
+			"power-chassis-good","","","","",
+	/*I0-I7*/	"","","","","","adc-sw","power-button","rtc-battery-voltage-read-enable",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","s0-ddr-save","soc-spi-nor-access","presence-cpu0",
+			"s0-rtc-lock","","","",
+	/*N0-N7*/	"hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
+			"jtag-dbgr-prsnt-n","s1-heartbeat","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"ps0-ac-loss-n","ps1-ac-loss-n","","",
+			"led-fault","cpld-user-mode","jtag-srst-n","led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","identify-button","led-identify",
+			"s1-ddr-save","spi-nor-access","host0-ready","presence-cpu1",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n",
+			"host0-shd-ack-n","s0-overtemp-n",
+	/*W0-W7*/	"ocp-aux-pwren","ocp-main-pwren","ocp-pgood","s1-pcp-pgood",
+			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
+	/*X0-X7*/	"i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok",
+			"s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n",
+			"s1-overtemp-n","cpld-s1-spi-auth-fail-n",
+	/*Y0-Y7*/	"","","","","","","","host0-special-boot",
+	/*Z0-Z7*/	"reset-button","ps0-pgood","ps1-pgood","","","","","";
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","","","s0-soc-pgood","",
+	/*18C0-18C7*/	"uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
+			"uart3-mode0","uart3-mode1","uart4-mode0","uart4-mode1",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
index 7c6af7f226e7..b550a48f48f0 100644
--- a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
@@ -171,7 +171,7 @@
 				reg = <0x50>;
 			};
 			dps650ab@58 {
-				compatible = "dps650ab";
+				compatible = "delta,dps650ab";
 				reg = <0x58>;
 			};
 		};
@@ -200,18 +200,14 @@
 	status = "okay";
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &gpio {
-	pin_gpio_c7 {
+	pin-gpio-c7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BIOS_SPI_MUX_S";
 	};
-	pin_gpio_d1 {
+	pin-gpio-d1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
index 9b4cf5ebe6d5..3ebd80db06f9 100644
--- a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
@@ -63,7 +63,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
-		spi-max-frequency = <100000000>; /* 100 MHz */
+		spi-max-frequency = <50000000>; /* 50 MHz */
 #include "openbmc-flash-layout.dtsi"
 	};
 };
@@ -83,6 +83,9 @@
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
 };
 
 &i2c1 {
@@ -103,6 +106,16 @@
 		compatible = "st,24c128", "atmel,24c128";
 		reg = <0x57>;
 		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
 	};
 };
 
@@ -173,7 +186,7 @@
 			"CK_33M_BMC", "LFRAME", "SERIRQ", "S_PLTRST";
 
 	/* Assert BMC_READY so BIOS doesn't sit around waiting for it */
-	bmc-ready {
+	bmc-ready-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
 		output-high;
@@ -202,3 +215,7 @@
 	status = "okay";
 	aspeed,lpc-io-reg = <0xca2>;
 };
+
+&peci0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
new file mode 100644
index 000000000000..8c57a071f488
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/watchdog/aspeed-wdt.h>
+
+/{
+	model = "ASRock E3C256D4I BMC";
+	compatible = "asrock,e3c256d4i-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+
+		i2c20 = &i2c2mux0ch0;
+		i2c21 = &i2c2mux0ch1;
+		i2c22 = &i2c2mux0ch2;
+		i2c23 = &i2c2mux0ch3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC heartbeat */
+		led-0 {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "timer";
+		};
+
+		/* system fault */
+		led-1 {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <100000000>; /* 100 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c2mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c2mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c2mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c2mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	vrm@60 {
+		compatible = "isil,isl69269";
+		reg = <0x60>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	/* FRU eeprom */
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&wdt1 {
+	aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>;
+};
+
+&wdt2 {
+	aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default /* CPU */
+		&pinctrl_pwm2_default      /* rear */
+		&pinctrl_pwm4_default>;    /* front */
+
+	/* CPU */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* rear */
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	/* front */
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "", "", "NMI_BTN_N", "BMC_NMI", "", "", "", "",
+		/*  B */ "", "", "", "", "", "", "", "",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "",
+			"", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"", "", "", "",
+		/*  H */ "FM_ME_RCVR_N", "O_PWROK", "", "D4_DIMM_EVENT_3V_N",
+			"MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "", "", "", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "", "",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "PCHHOT_BMC_N", "", "RSMRST", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "",
+		/*  Z */ "CPU_CATERR_BMC_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "",
+			"", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N",
+		/* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY", "", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
+		&pinctrl_adc1_default	   /* 5VSB */
+		&pinctrl_adc2_default	   /* CPU1 */
+		&pinctrl_adc3_default	   /* VCCSA */
+		&pinctrl_adc4_default	   /* VCCM */
+		&pinctrl_adc5_default	   /* V10M */
+		&pinctrl_adc6_default	   /* VCCIO */
+		&pinctrl_adc7_default	   /* VCCGT */
+		&pinctrl_adc8_default	   /* VPPM */
+		&pinctrl_adc9_default	   /* BAT */
+		&pinctrl_adc10_default	   /* 3V */
+		&pinctrl_adc11_default	   /* 5V */
+		&pinctrl_adc12_default	   /* 12V */
+		&pinctrl_adc13_default	   /* GND */
+		&pinctrl_adc14_default	   /* GND */
+		&pinctrl_adc15_default>;   /* GND */
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
index ff4c07c69af1..e306655ce4a3 100644
--- a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
@@ -31,7 +31,7 @@
 		};
 
 		system-fault {
-			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
 			panic-indicator;
 		};
 	};
@@ -51,7 +51,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
-		spi-max-frequency = <100000000>; /* 100 MHz */
+		spi-max-frequency = <50000000>; /* 50 MHz */
 #include "openbmc-flash-layout-64.dtsi"
 	};
 };
@@ -71,6 +71,9 @@
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
 };
 
 &i2c0 {
@@ -98,14 +101,14 @@
 
 	/* IPB PMIC */
 	lm25066@40 {
-		compatible = "lm25066";
+		compatible = "ti,lm25066";
 		reg = <0x40>;
 		shunt-resistor-micro-ohms = <1000>;
 	};
 
 	/* 12VSB PMIC */
 	lm25066@41 {
-		compatible = "lm25066";
+		compatible = "ti,lm25066";
 		reg = <0x41>;
 		shunt-resistor-micro-ohms = <10000>;
 	};
@@ -131,6 +134,16 @@
 		compatible = "st,24c128", "atmel,24c128";
 		reg = <0x50>;
 		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
new file mode 100644
index 000000000000..c4097e4f2ca4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/{
+	model = "ASRock SPC621D8HM3 BMC";
+	compatible = "asrock,spc621d8hm3-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+
+		i2c20 = &i2c1mux0ch0;
+		i2c21 = &i2c1mux0ch1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC heartbeat */
+		led-0 {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "timer";
+		};
+
+		/* system fault */
+		led-1 {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* hardware monitor/thermal sensor */
+	temperature-sensor@29 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x29>;
+	};
+
+	/* motherboard temp sensor (TMP1, near BMC) */
+	temperature-sensor@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+
+	/* motherboard FRU eeprom */
+	eeprom@50 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+
+	/* M.2 slot smbus mux */
+	i2c-mux@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c1mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c1mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default
+		&pinctrl_pwm4_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "LOCATORLED_STATUS_N", "LOCATORBTN_N",
+			"BMC_READY_N", "FM_SPD_DDRCPU_LVLSHFT_EN",
+			"", "", "", "",
+		/*  B */ "NODE_ID_1", "NODE_ID_2", "PSU_FAN_FAIL_N", "",
+			"", "", "", "GPIO_RST",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "FP_PWR_BTN_MUX_N", "FM_BMC_PWRBTN_OUT_N",
+			"FP_RST_BTN_N", "RST_BMC_RSTBTN_OUT_N",
+			"NMI_BTN_N", "BMC_NMI",
+			"", "",
+		/*  E */ "", "", "", "FM_ME_RCVR_N", "", "", "", "",
+		/*  F */ "BMC_SMB_SEL_N", "FM_CPU2_DISABLE_COD_N",
+			"FM_REMOTE_DEBUG_BMC_EN", "FM_CPU_ERR0_LVT3_EN",
+			"FM_CPU_ERR1_LVT3_EN", "FM_CPU_ERR2_LVT3_EN",
+			"FM_MEM_THERM_EVENT_CPU1_LVT3_N", "FM_MEM_THERM_EVENT_CPU2_LVT3_N",
+		/*  G */ "HWM_BAT_EN", "", "BMC_PHYRST_N", "FM_BIOS_SPI_BMC_CTRL",
+			"BMC_ALERT1_N", "BMC_ALERT2_N", "BMC_ALERT3_N", "IRQ_SML0_ALERT_N",
+		/*  H */ "BMC_SMB_PRESENT_1_N", "FM_PCH_CORE_VID_0", "FM_PCH_CORE_VID_1", "",
+			"FM_MFG_MODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "IRQ_PVDDQ_ABCD_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_ABCD_CPU2_VRHOT_LVC3_N",
+			"IRQ_PVDDQ_EFGH_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_EFGH_CPU2_VRHOT_LVC3_N",
+			"", "", "", "",
+		/*  J */ "", "", "", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "FM_PVCCIN_CPU1_PWR_IN_ALERT_N", "FM_PVCCIN_CPU2_PWR_IN_ALERT_N",
+			"IRQ_PVCCIN_CPU1_VRHOT_LVC3_N", "IRQ_PVCCIN_CPU2_VRHOT_LVC3_N",
+			"FM_CPU1_PROCHOT_BMC_LVC3_N", "",
+			"FM_CPU1_MEMHOT_OUT_N", "FM_CPU2_MEMHOT_OUT_N",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "RST_GLB_RST_WARN_N", "PCIE_WAKE_N",
+		/*  R */ "", "", "FM_BMC_SUSACK_N", "FM_BMC_EUP_LOT6_N",
+			"", "FM_BMC_PCH_SCI_LPC_N", "", "",
+		/*  S */ "FM_DBP_PRESENT_N", "FM_CPU2_SKTOCC_LCT3_N",
+			"FM_CPU1_FIVR_FAULT_LVT3", "FM_CPU2_FIVR_FAULT_LVT3",
+			 "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "FM_SLPS3_N", "FM_SLPS4_N", "", "FM_BMC_ONCTL_N_PLD",
+			"", "", "", "",
+		/*  Z */ "FM_CPU_MSMI_CATERR_LVT3_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "FM_CPU1_THERMTRIP_LATCH_LVT3_N", "FM_CPU2_THERMTRIP_LATCH_LVT3_N",
+			"FM_BIOS_POST_COMPLT_N", "DBP_BMC_SYSPWROK",
+			"", "IRQ_SML0_ALERT_MUX_N",
+			"IRQ_SMI_ACTIVE_N", "IRQ_NMI_EVENT_N",
+		/* AB */ "FM_PCH_BMC_THERMTRIP_N", "PWRGD_SYS_PWROK",
+			"ME_OVERRIDE", "IRQ_BMC_PCH_SMI_LPC_N",
+			"", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
+		&pinctrl_adc1_default	   /* 5VSB */
+		&pinctrl_adc2_default	   /* CPU1 */
+		&pinctrl_adc3_default	   /* NC */
+		&pinctrl_adc4_default	   /* VCCMABCD */
+		&pinctrl_adc5_default	   /* VCCMEFGH */
+		&pinctrl_adc6_default	   /* NC */
+		&pinctrl_adc7_default	   /* NC */
+		&pinctrl_adc8_default	   /* PVNN_PCH */
+		&pinctrl_adc9_default	   /* 1P05PCH */
+		&pinctrl_adc10_default	   /* 1P8PCH */
+		&pinctrl_adc11_default	   /* BAT */
+		&pinctrl_adc12_default	   /* 3V */
+		&pinctrl_adc13_default	   /* 5V */
+		&pinctrl_adc14_default	   /* 12V */
+		&pinctrl_adc15_default>;   /* GND */
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
new file mode 100644
index 000000000000..e61a6cb43438
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Asrock Rack X570D4U BMC";
+	compatible = "asrock,x570d4u-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c40 = &i2c4mux0ch0;
+		i2c41 = &i2c4mux0ch1;
+		i2c42 = &i2c4mux0ch2;
+		i2c43 = &i2c4mux0ch3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pci_memory: region@9a000000 {
+			no-map;
+			reg = <0x9a000000 0x00010000>; /* 64K */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02800000>;	/* 40M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* led-heartbeat-n */
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "timer";
+		};
+
+		led-1 {
+			/* led-fault-n */
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_FAULT;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*  A */ "input-locatorled-n", "", "", "", "", "", "", "",
+	/*  B */ "input-bios-post-cmplt-n", "", "", "", "", "", "", "",
+	/*  C */ "", "", "", "", "", "", "control-locatorbutton-n", "",
+	/*  D */ "button-power-n", "control-power-n", "button-reset-n",
+		 "control-reset-n", "", "", "", "",
+	/*  E */ "", "", "", "", "", "", "", "",
+	/*  F */ "", "", "", "", "", "", "", "",
+	/*  G */ "output-hwm-vbat-enable", "input-id0-n", "input-id1-n",
+		 "input-id2-n", "input-aux-smb-alert-n", "",
+		 "input-psu-smb-alert-n", "",
+	/*  H */ "", "", "", "", "input-mfg-mode-n", "",
+		 "led-heartbeat-n", "input-case-open-n",
+	/*  I */ "", "", "", "", "", "", "", "",
+	/*  J */ "output-bmc-ready-n", "", "", "", "", "", "", "",
+	/*  K */ "", "", "", "", "", "", "", "",
+	/*  L */ "", "", "", "", "", "", "", "",
+	/*  M */ "", "", "", "", "", "", "", "",
+	/*  N */ "", "", "", "", "", "", "", "",
+	/*  O */ "", "", "", "", "", "", "", "",
+	/*  P */ "", "", "", "", "", "", "", "",
+	/*  Q */ "", "", "", "", "input-bmc-smb-present-n", "", "",
+		 "input-pcie-wake-n",
+	/*  R */ "", "", "", "", "", "", "", "",
+	/*  S */ "input-bmc-pchhot-n", "", "", "", "", "", "", "",
+	/*  T */ "", "", "", "", "", "", "", "",
+	/*  U */ "", "", "", "", "", "", "", "",
+	/*  V */ "", "", "", "", "", "", "", "",
+	/*  W */ "", "", "", "", "", "", "", "",
+	/*  X */ "", "", "", "", "", "", "", "",
+	/*  Y */ "input-sleep-s3-n", "input-sleep-s5-n", "", "", "", "",
+		 "", "",
+	/*  Z */ "", "", "led-fault-n", "output-bmc-throttle-n", "", "",
+		 "", "",
+	/* AA */ "input-cpu1-thermtrip-latch-n", "",
+		 "input-cpu1-prochot-n", "", "", "", "", "",
+	/* AB */ "", "input-power-good", "", "", "", "", "", "",
+	/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <10000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default &pinctrl_mdio2_default>;
+	use-ncsi;
+
+	nvmem-cells = <&eth1_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	/* SMBus on auxiliary panel header (AUX_PANEL1) */
+	status = "okay";
+};
+
+&i2c1 {
+	/* Hardware monitoring SMBus */
+	status = "okay";
+
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	/* PSU SMBus (PSU_SMB1) */
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c4mux0ch0: i2c@0 {
+			/* SMBus on PCI express 16x slot */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c4mux0ch1: i2c@1 {
+			/* SMBus on PCI express 8x slot */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c4mux0ch2: i2c@2 {
+			/* Unknown */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c4mux0ch3: i2c@3 {
+			/* SMBus on PCI express 1x slot */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c5 {
+	/* SMBus on BMC connector (BMC_SMB_1) */
+	status = "okay";
+};
+
+&i2c7 {
+	/* FRU and SPD EEPROM SMBus */
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+
+			eth1_macaddress: macaddress@3f88 {
+				reg = <0x3f88 6>;
+			};
+		};
+	};
+};
+
+&i2c8 {
+	/* SMBus on intelligent platform management bus header (IPMB_1) */
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&pci_memory>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+				&pinctrl_pwm1_default
+				&pinctrl_pwm2_default
+				&pinctrl_pwm3_default
+				&pinctrl_pwm4_default
+				&pinctrl_pwm5_default>;
+
+	fan@0 {
+		/* FAN1 (4-pin) */
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		/* FAN2 (4-pin) */
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		/* FAN3 (4-pin) */
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		/* FAN4 (6-pin) */
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0b>;
+	};
+
+	fan@4 {
+		/* FAN6 (6-pin) */
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0d>;
+	};
+
+	fan@5 {
+		/* FAN5 (6-pin) */
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0c>;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default       /* 3VSB */
+			&pinctrl_adc1_default    /* 5VSB */
+			&pinctrl_adc2_default    /* VCPU */
+			&pinctrl_adc3_default    /* VSOC */
+			&pinctrl_adc4_default    /* VCCM */
+			&pinctrl_adc5_default    /* APU-VDDP */
+			&pinctrl_adc6_default    /* PM-VDD-CLDO */
+			&pinctrl_adc7_default    /* PM-VDDCR-S5 */
+			&pinctrl_adc8_default    /* PM-VDDCR */
+			&pinctrl_adc9_default    /* VBAT */
+			&pinctrl_adc10_default   /* 3V */
+			&pinctrl_adc11_default   /* 5V */
+			&pinctrl_adc12_default>; /* 12V */
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
new file mode 100644
index 000000000000..64f4ed07c7d2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 ASUS Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "ASUS-X4TF";
+	compatible = "asus,x4tf-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial4:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+				<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-uid {
+			gpios = <&gpio0 ASPEED_GPIO(P, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+			default-state = "off";
+		};
+
+		led-status_Y {
+			gpios = <&gpio1 ASPEED_GPIO(B, 1) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-sys_boot_status {
+			gpios = <&gpio1 ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "bios";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	pca9555_4_20: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_4_22: gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_4_24: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*A0 - A3 0*/	"", "STRAP_BMC_BATTERY_GPIO1", "", "",
+		/*A4 - A7 4*/	"", "", "", "",
+		/*B0 - B7 8*/	"", "", "", "", "", "", "", "";
+	};
+
+	pca9555_4_26: gpio@26 {
+		compatible = "nxp,pca9555";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca9555_5_24: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2c-mux@70  {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70 >;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_5: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			pca9555_5_5_20: gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"", "", "", "", "", "", "", "",
+					"", "", "SYS_FAN6", "SYS_FAN5",
+					"SYS_FAN4", "SYS_FAN3",
+					"SYS_FAN2", "SYS_FAN1";
+			};
+
+			pca9555_5_5_21: gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina219";
+				reg = <0x44>;
+				shunt-resistor = <2>;
+			};
+		};
+
+		channel_6: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_7: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_8: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	pca9555_6_27: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_6_20: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*A0 0*/	"", "", "", "", "", "", "", "",
+		/*B0 8*/	"Drive_NVMe1", "Drive_NVMe2", "", "",
+		/*B4 12*/	"", "", "", "";
+	};
+
+	pca9555_6_21: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		idle-state = <1>;
+
+		channel_9: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina219";
+				reg = <0x40>;
+				shunt-resistor = <2>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina219";
+				reg = <0x41>;
+				shunt-resistor = <5>;
+			};
+		};
+
+		channel_10: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_11: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_12: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		channel_13: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_14: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_15: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_16: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		channel_17: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_18: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina219";
+				reg = <0x41>;
+				shunt-resistor = <5>;
+			};
+		};
+
+		channel_19: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_20: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c08";
+		reg = <0x51>;
+	};
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&sdc {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs1 {
+	aspeed,lpc-io-reg = <0xca0>;
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0 0*/	"", "", "", "", "", "", "", "",
+	/*B0 8*/	"", "", "", "", "", "", "PS_PWROK", "",
+	/*C0 16*/	"", "", "", "", "", "", "", "",
+	/*D0 24*/	"", "", "", "", "", "", "", "",
+	/*E0 32*/	"", "", "", "", "", "", "", "",
+	/*F0 40*/	"", "", "", "", "", "", "", "",
+	/*G0 48*/	"", "", "", "", "", "", "", "",
+	/*H0 56*/	"", "", "", "", "", "", "", "",
+	/*I0 64*/	"", "", "", "", "", "", "", "",
+	/*J0 72*/	"", "", "", "", "", "", "", "",
+	/*K0 80*/	"", "", "", "", "", "", "", "",
+	/*L0 88*/	"", "", "", "", "", "", "", "",
+	/*M0 96*/	"", "", "", "", "", "", "", "",
+	/*N0 104*/	"", "", "", "",
+	/*N4 108*/	"POST_COMPLETE", "ESR1_GPIO_AST_SPISEL", "", "",
+	/*O0 112*/	"", "", "", "", "", "", "", "",
+	/*P0 120*/	"ID_BUTTON", "ID_OUT", "POWER_BUTTON", "POWER_OUT",
+	/*P4 124*/	"RESET_BUTTON", "RESET_OUT", "", "HEARTBEAT",
+	/*Q0 128*/	"", "", "", "", "", "", "", "",
+	/*R0 136*/	"", "", "", "", "", "", "", "",
+	/*S0 144*/	"", "", "", "", "", "", "", "",
+	/*T0 152*/	"", "", "", "", "", "", "", "",
+	/*U0 160*/	"", "", "", "", "", "", "", "",
+	/*V0 168*/	"", "", "", "", "", "", "", "",
+	/*W0 176*/	"", "", "", "", "", "", "", "",
+	/*X0 184*/	"", "", "", "", "", "", "", "",
+	/*Y0 192*/	"", "", "", "", "", "", "", "",
+	/*Z0 200*/	"", "", "", "", "", "", "", "";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts
index f75cad41ae6f..54a5509b04f1 100644
--- a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts
@@ -424,7 +424,7 @@
 
 &i2c3 {
 	status = "okay";
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -471,7 +471,7 @@
 
 &i2c6 {
 	status = "okay";
-	i2c-switch@72 {
+	i2c-mux@72 {
 		compatible = "nxp,pca9548";
 		reg = <0x72>;
 		#address-cells = <1>;
@@ -524,7 +524,7 @@
 		};
 	};
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -533,7 +533,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
-			i2c-switch@71 {
+			i2c-mux@71 {
 				compatible = "nxp,pca9546";
 				reg = <0x71>;
 				#address-cells = <1>;
@@ -569,7 +569,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
-			i2c-switch@71 {
+			i2c-mux@71 {
 				compatible = "nxp,pca9546";
 				reg = <0x71>;
 				#address-cells = <1>;
@@ -605,7 +605,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			i2c-switch@71 {
+			i2c-mux@71 {
 				compatible = "nxp,pca9546";
 				reg = <0x71>;
 				#address-cells = <1>;
@@ -640,7 +640,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
-			i2c-switch@71 {
+			i2c-mux@71 {
 				compatible = "nxp,pca9546";
 				reg = <0x71>;
 				#address-cells = <1>;
@@ -808,7 +808,7 @@
 
 &i2c10 {
 	status = "okay";
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -838,7 +838,7 @@
 		};
 	};
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		reg = <0x71>;
 		#address-cells = <1>;
@@ -915,14 +915,14 @@
 };
 
 &gpio {
-	pin_gpio_i3 {
+	pin-gpio-i3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "NCSI_BMC_R_SEL";
 	};
 
-	pin_gpio_b6 {
+	pin-gpio-b6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts
new file mode 100644
index 000000000000..cce8d0416dc8
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+#define EFUSE_OUTPUT(n)					\
+	efuse##n {					\
+		compatible = "regulator-output";	\
+		vout-supply = <&efuse##n>;		\
+	}
+
+#define __stringify(x) #x
+
+#define EFUSE(hexaddr, num)							\
+	efuse@##hexaddr {							\
+		compatible = "ti,lm25066";					\
+		reg = <0x##hexaddr>;						\
+		shunt-resistor-micro-ohms = <675>;				\
+		regulators {							\
+			efuse##num: vout {					\
+				regulator-name = __stringify(efuse##num##-reg);	\
+			};							\
+		};								\
+	}
+
+/{
+	model = "Delta Power AHE-50DC";
+	compatible = "delta,ahe50dc-bmc", "aspeed,ast2400";
+
+	aliases {
+		serial4 = &uart5;
+
+		/*
+		 * pca9541-arbitrated logical i2c buses are numbered as the
+		 * corresponding physical bus plus 20
+		 */
+		i2c20 = &i2carb0;
+		i2c21 = &i2carb1;
+		i2c22 = &i2carb2;
+		i2c23 = &i2carb3;
+		i2c24 = &i2carb4;
+		i2c26 = &i2carb6;
+		i2c27 = &i2carb7;
+		i2c28 = &i2carb8;
+		i2c32 = &i2carb12;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,115200n8 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		panic {
+			gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "panic";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+
+	EFUSE_OUTPUT(01);
+	EFUSE_OUTPUT(02);
+	EFUSE_OUTPUT(03);
+	EFUSE_OUTPUT(04);
+	EFUSE_OUTPUT(05);
+	EFUSE_OUTPUT(06);
+	EFUSE_OUTPUT(07);
+	EFUSE_OUTPUT(08);
+	EFUSE_OUTPUT(09);
+	EFUSE_OUTPUT(10);
+	EFUSE_OUTPUT(11);
+	EFUSE_OUTPUT(12);
+	EFUSE_OUTPUT(13);
+	EFUSE_OUTPUT(14);
+	EFUSE_OUTPUT(15);
+	EFUSE_OUTPUT(16);
+	EFUSE_OUTPUT(17);
+	EFUSE_OUTPUT(18);
+	EFUSE_OUTPUT(19);
+	EFUSE_OUTPUT(20);
+	EFUSE_OUTPUT(21);
+	EFUSE_OUTPUT(22);
+	EFUSE_OUTPUT(23);
+	EFUSE_OUTPUT(24);
+	EFUSE_OUTPUT(25);
+	EFUSE_OUTPUT(26);
+	EFUSE_OUTPUT(27);
+	EFUSE_OUTPUT(28);
+	EFUSE_OUTPUT(29);
+	EFUSE_OUTPUT(30);
+	EFUSE_OUTPUT(31);
+	EFUSE_OUTPUT(32);
+	EFUSE_OUTPUT(33);
+	EFUSE_OUTPUT(34);
+	EFUSE_OUTPUT(35);
+	EFUSE_OUTPUT(36);
+	EFUSE_OUTPUT(37);
+	EFUSE_OUTPUT(38);
+	EFUSE_OUTPUT(39);
+	EFUSE_OUTPUT(40);
+	EFUSE_OUTPUT(41);
+	EFUSE_OUTPUT(42);
+	EFUSE_OUTPUT(43);
+	EFUSE_OUTPUT(44);
+	EFUSE_OUTPUT(45);
+	EFUSE_OUTPUT(46);
+	EFUSE_OUTPUT(47);
+	EFUSE_OUTPUT(48);
+	EFUSE_OUTPUT(49);
+	EFUSE_OUTPUT(50);
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "flash0";
+		spi-max-frequency = <50000000>; // 50 MHz
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@79 {
+		compatible = "nxp,pca9541";
+		reg = <0x79>;
+
+		i2carb0: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57 */
+			EFUSE(10, 03);
+			EFUSE(11, 04);
+			EFUSE(12, 01);
+			EFUSE(13, 02);
+			EFUSE(14, 13);
+			EFUSE(15, 14);
+			EFUSE(16, 15);
+			EFUSE(17, 16);
+			EFUSE(40, 12);
+			EFUSE(41, 11);
+			EFUSE(42, 10);
+			EFUSE(43, 09);
+			EFUSE(44, 08);
+			EFUSE(45, 07);
+			EFUSE(46, 05);
+			EFUSE(47, 06);
+			EFUSE(50, 17);
+			EFUSE(51, 18);
+			EFUSE(52, 20);
+			EFUSE(53, 19);
+			EFUSE(54, 22);
+			EFUSE(55, 21);
+			EFUSE(56, 24);
+			EFUSE(57, 23);
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@72 {
+		compatible = "nxp,pca9541";
+		reg = <0x72>;
+
+		i2carb1: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@73 {
+		compatible = "nxp,pca9541";
+		reg = <0x73>;
+
+		i2carb2: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@74 {
+		compatible = "nxp,pca9541";
+		reg = <0x74>;
+
+		i2carb3: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7a {
+		compatible = "nxp,pca9541";
+		reg = <0x7a>;
+
+		i2carb4: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9534";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57, 59, 5a */
+			EFUSE(10, 27);
+			EFUSE(11, 28);
+			EFUSE(12, 25);
+			EFUSE(13, 26);
+			EFUSE(14, 37);
+			EFUSE(15, 38);
+			EFUSE(16, 39);
+			EFUSE(17, 40);
+			EFUSE(40, 36);
+			EFUSE(41, 35);
+			EFUSE(42, 34);
+			EFUSE(43, 33);
+			EFUSE(44, 32);
+			EFUSE(45, 31);
+			EFUSE(46, 29);
+			EFUSE(47, 30);
+			EFUSE(50, 41);
+			EFUSE(51, 42);
+			EFUSE(52, 44);
+			EFUSE(53, 43);
+			EFUSE(54, 46);
+			EFUSE(55, 45);
+			EFUSE(56, 48);
+			EFUSE(57, 47);
+			EFUSE(59, 49);
+			EFUSE(5a, 50);
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@75 {
+		compatible = "nxp,pca9541";
+		reg = <0x75>;
+
+		i2carb6: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@76 {
+		compatible = "nxp,pca9541";
+		reg = <0x76>;
+
+		i2carb7: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7c {
+		compatible = "nxp,pca9541";
+		reg = <0x7c>;
+
+		i2carb8: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fancontrol@30 {
+				compatible = "delta,ahe50dc-fan";
+				reg = <0x30>;
+			};
+
+			/* Baseboard FRU eeprom */
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@71 {
+		compatible = "nxp,pca9541";
+		reg = <0x71>;
+
+		i2carb12: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "", "", "", "", "", "", "", "",
+		/*  B */ "", "", "", "", "", "", "", "",
+		/*  C */ "RESET_PEER_N", "HEARTBEAT_OUT", "", "", "", "", "", "",
+		/*  D */ "", "", "", "", "", "", "", "",
+		/*  E */ "DOOM_N", "", "", "", "", "LED_PWR_BLUE", "", "",
+		/*  F */ "", "", "", "", "", "", "", "",
+		/*  G */ "", "", "", "", "", "", "", "",
+		/*  H */ "", "", "", "", "", "", "", "",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "", "", "BMC_ID", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "", "", "", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "LED_GREEN", "", "LED_RED", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "", "",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "HEARTBEAT_IN", "BOARDREV0", "BOARDREV1", "",
+		/*  Z */ "", "", "", "", "", "", "", "",
+		/* AA */ "", "", "", "", "", "", "", "",
+		/* AB */ "", "", "", "";
+
+	/*
+	 * I don't rightly know what this GPIO really *is*, but setting it to
+	 * zero causes the fans to run at full speed, after which setting it
+	 * back to one causes a power output glitch, so install a hog to keep
+	 * it at one as a failsafe to ensure nothing accidentally touches it.
+	 */
+	doom-guardrail-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
index 41d2b1535d9a..24969c82d05e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
@@ -7,6 +7,7 @@
 #include <dt-bindings/usb/pd.h>
 #include <dt-bindings/leds/leds-pca955x.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
 
 / {
 	model = "Facebook Bletchley BMC";
@@ -44,22 +45,18 @@
 		num-chipselects = <1>;
 		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
 	};
 
-	switchphy: ethernet-phy@0 {
-		// Fixed link
-	};
-
 	front_gpio_leds {
 		compatible = "gpio-leds";
 		sys_log_id {
 			default-state = "off";
-			gpios = <&front_leds 0 GPIO_ACTIVE_HIGH>;
+			gpios = <&front_leds 0 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -190,12 +187,100 @@
 			gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		presence-sled1 {
+			label = "presence-sled1";
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 2)>;
+		};
+		presence-sled2 {
+			label = "presence-sled2";
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 3)>;
+		};
+		presence-sled3 {
+			label = "presence-sled3";
+			gpios = <&gpio0 ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 4)>;
+		};
+		presence-sled4 {
+			label = "presence-sled4";
+			gpios = <&gpio0 ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 5)>;
+		};
+		presence-sled5 {
+			label = "presence-sled5";
+			gpios = <&gpio0 ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 6)>;
+		};
+		presence-sled6 {
+			label = "presence-sled6";
+			gpios = <&gpio0 ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 7)>;
+		};
+	};
+
+	vbus_sled1: vbus_sled1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled1_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled2: vbus_sled2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled2_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled3: vbus_sled3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled3_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled4: vbus_sled4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled4";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled4_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled5: vbus_sled5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled5";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled5_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled6: vbus_sled6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled6";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled6_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &mac2 {
 	status = "okay";
 	phy-mode = "rgmii";
-	phy-handle = <&switchphy>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii3_default>;
 
@@ -217,7 +302,7 @@
 	flash@1 {
 		status = "okay";
 		m25p,fast-read;
-		label = "flash1";
+		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
 	};
 };
@@ -301,16 +386,19 @@
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 0) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled1>;
+
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
 			power-role = "dual";
 			try-power-role = "sink";
 			data-role = "dual";
 			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-					PDO_VAR(3000, 12000, 3000)
-					PDO_PPS_APDO(3000, 11000, 3000)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
 			op-sink-microwatt = <10000000>;
 		};
 	};
@@ -387,16 +475,19 @@
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 1) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled2>;
+
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
 			power-role = "dual";
 			try-power-role = "sink";
 			data-role = "dual";
 			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-					PDO_VAR(3000, 12000, 3000)
-					PDO_PPS_APDO(3000, 11000, 3000)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
 			op-sink-microwatt = <10000000>;
 		};
 	};
@@ -473,16 +564,19 @@
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled3>;
+
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
 			power-role = "dual";
 			try-power-role = "sink";
 			data-role = "dual";
 			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-					PDO_VAR(3000, 12000, 3000)
-					PDO_PPS_APDO(3000, 11000, 3000)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
 			op-sink-microwatt = <10000000>;
 		};
 	};
@@ -559,16 +653,19 @@
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(S, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled4>;
+
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
 			power-role = "dual";
 			try-power-role = "sink";
 			data-role = "dual";
 			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-					PDO_VAR(3000, 12000, 3000)
-					PDO_PPS_APDO(3000, 11000, 3000)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
 			op-sink-microwatt = <10000000>;
 		};
 	};
@@ -645,16 +742,19 @@
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(Y, 3) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled5>;
+
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
 			power-role = "dual";
 			try-power-role = "sink";
 			data-role = "dual";
 			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-					PDO_VAR(3000, 12000, 3000)
-					PDO_PPS_APDO(3000, 11000, 3000)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
 			op-sink-microwatt = <10000000>;
 		};
 	};
@@ -731,16 +831,19 @@
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled6>;
+
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
 			power-role = "dual";
 			try-power-role = "sink";
 			data-role = "dual";
 			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-					PDO_VAR(3000, 12000, 3000)
-					PDO_PPS_APDO(3000, 11000, 3000)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
 			op-sink-microwatt = <10000000>;
 		};
 	};
@@ -792,11 +895,6 @@
 		reg = <0x4f>;
 	};
 
-	hdc1080@40 {
-		compatible = "ti,hdc1080";
-		reg = <0x40>;
-	};
-
 	front_leds: pca9552@67 {
 		compatible = "nxp,pca9552";
 		reg = <0x67>;
@@ -857,9 +955,19 @@
 	multi-master;
 	aspeed,hw-timeout-ms = <1000>;
 	status = "okay";
+
+	//USB Debug Connector
+	ipmb13@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
 };
 
 &gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiov2_unbiased_default>;
+
 	gpio-line-names =
 	/*A0-A7*/	"","","","","","","","",
 	/*B0-B7*/	"FUSB302_SLED1_INT_N","FUSB302_SLED2_INT_N",
@@ -889,11 +997,11 @@
 	/*M0-M7*/	"ALERT_SLED1_N","ALERT_SLED2_N",
 			"ALERT_SLED3_N","ALERT_SLED4_N",
 			"ALERT_SLED5_N","ALERT_SLED6_N",
-			"","",
+			"","USB_DEBUG_PWR_BTN_N",
 	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
 			"LED_POSTCODE_2","LED_POSTCODE_3",
 			"LED_POSTCODE_4","LED_POSTCODE_5",
-			"LED_POSTCODE_5","LED_POSTCODE_7",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
 	/*O0-O7*/	"","","","",
 			"","BOARD_ID0","BOARD_ID1","BOARD_ID2",
 	/*P0-P7*/	"","","","","","","","BMC_HEARTBEAT",
@@ -950,3 +1058,33 @@
 &ehci0 {
 	status = "okay";
 };
+
+&ehci1 {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_gpiov2_unbiased_default: gpiov2 {
+		pins = "AD14";
+		bias-disable;
+	};
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
new file mode 100644
index 000000000000..14dd0ab64130
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -0,0 +1,1222 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Catalina BMC";
+	compatible = "facebook,catalina-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		i2c16 = &i2c1mux0ch0;
+		i2c17 = &i2c1mux0ch1;
+		i2c18 = &i2c1mux0ch2;
+		i2c19 = &i2c1mux0ch3;
+		i2c20 = &i2c1mux0ch4;
+		i2c21 = &i2c1mux0ch5;
+		i2c22 = &i2c1mux0ch6;
+		i2c23 = &i2c1mux0ch7;
+		i2c24 = &i2c0mux0ch0;
+		i2c25 = &i2c0mux0ch1;
+		i2c26 = &i2c0mux0ch2;
+		i2c27 = &i2c0mux0ch3;
+		i2c28 = &i2c0mux1ch0;
+		i2c29 = &i2c0mux1ch1;
+		i2c30 = &i2c0mux1ch2;
+		i2c31 = &i2c0mux1ch3;
+		i2c32 = &i2c0mux2ch0;
+		i2c33 = &i2c0mux2ch1;
+		i2c34 = &i2c0mux2ch2;
+		i2c35 = &i2c0mux2ch3;
+		i2c36 = &i2c0mux3ch0;
+		i2c37 = &i2c0mux3ch1;
+		i2c38 = &i2c0mux3ch2;
+		i2c39 = &i2c0mux3ch3;
+		i2c40 = &i2c0mux4ch0;
+		i2c41 = &i2c0mux4ch1;
+		i2c42 = &i2c0mux4ch2;
+		i2c43 = &i2c0mux4ch3;
+		i2c44 = &i2c0mux5ch0;
+		i2c45 = &i2c0mux5ch1;
+		i2c46 = &i2c0mux5ch2;
+		i2c47 = &i2c0mux5ch3;
+		i2c48 = &i2c5mux0ch0;
+		i2c49 = &i2c5mux0ch1;
+		i2c50 = &i2c5mux0ch2;
+		i2c51 = &i2c5mux0ch3;
+		i2c52 = &i2c5mux0ch4;
+		i2c53 = &i2c5mux0ch5;
+		i2c54 = &i2c5mux0ch6;
+		i2c55 = &i2c5mux0ch7;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	spi1_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "bmc_ready_noled";
+			gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+
+		led-3 {
+			label = "bmc_ready_cpld_noled";
+			gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+	};
+
+	p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p2v5_bmc_aux";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi4_default>;
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	multi-master;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c0mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			mctp-controller;
+
+			// IOB0 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			mctp-controller;
+
+			// IOB0 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux1ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux1ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 0 IOEXP
+			io_expander7: gpio@20 {
+				compatible = "nxp,pca9535";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// IO Mezz 0 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+		i2c0mux1ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux1ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux2ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux2ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux2ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux2ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c0mux3ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			mctp-controller;
+
+			// IOB1 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux3ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux3ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			mctp-controller;
+
+			// IOB1 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux3ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux4ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux4ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 1 IOEXP
+			io_expander8: gpio@21 {
+				compatible = "nxp,pca9535";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// IO Mezz 1 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+		i2c0mux4ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux4ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux5ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux5ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux5ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux5ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c1mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			power-sensor@22 {
+				compatible = "mps,mp5990";
+				reg = <0x22>;
+			};
+		};
+		i2c1mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		i2c1mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			fanctl2: fan-controller@1 {
+				compatible = "nuvoton,nct7363";
+				reg = <0x01>;
+				#pwm-cells = <2>;
+
+				fan-9 {
+					pwms = <&fanctl2 0 40000>;
+					tach-ch = /bits/ 8 <0x09>;
+				};
+				fan-11 {
+					pwms = <&fanctl2 0 40000>;
+					tach-ch = /bits/ 8 <0x0b>;
+				};
+				fan-10 {
+					pwms = <&fanctl2 4 40000>;
+					tach-ch = /bits/ 8 <0x0a>;
+				};
+				fan-13 {
+					pwms = <&fanctl2 4 40000>;
+					tach-ch = /bits/ 8 <0x0d>;
+				};
+				fan-15 {
+					pwms = <&fanctl2 6 40000>;
+					tach-ch = /bits/ 8 <0x0f>;
+				};
+				fan-1 {
+					pwms = <&fanctl2 6 40000>;
+					tach-ch = /bits/ 8 <0x01>;
+				};
+				fan-0 {
+					pwms = <&fanctl2 10 40000>;
+					tach-ch = /bits/ 8 <0x00>;
+				};
+				fan-3 {
+					pwms = <&fanctl2 10 40000>;
+					tach-ch = /bits/ 8 <0x03>;
+				};
+			};
+			fanctl3: fan-controller@2 {
+				compatible = "nuvoton,nct7363";
+				reg = <0x02>;
+				#pwm-cells = <2>;
+
+				fan-9 {
+					pwms = <&fanctl3 0 40000>;
+					tach-ch = /bits/ 8 <0x09>;
+				};
+				fan-11 {
+					pwms = <&fanctl3 0 40000>;
+					tach-ch = /bits/ 8 <0x0b>;
+				};
+				fan-10 {
+					pwms = <&fanctl3 4 40000>;
+					tach-ch = /bits/ 8 <0x0a>;
+				};
+				fan-13 {
+					pwms = <&fanctl3 4 40000>;
+					tach-ch = /bits/ 8 <0x0d>;
+				};
+				fan-15 {
+					pwms = <&fanctl3 6 40000>;
+					tach-ch = /bits/ 8 <0x0f>;
+				};
+				fan-1 {
+					pwms = <&fanctl3 6 40000>;
+					tach-ch = /bits/ 8 <0x01>;
+				};
+				fan-0 {
+					pwms = <&fanctl3 10 40000>;
+					tach-ch = /bits/ 8 <0x00>;
+				};
+				fan-3 {
+					pwms = <&fanctl3 10 40000>;
+					tach-ch = /bits/ 8 <0x03>;
+				};
+			};
+			fanctl0: fan-controller@21 {
+				compatible = "maxim,max31790";
+				reg = <0x21>;
+			};
+			fanctl1: fan-controller@27 {
+				compatible = "maxim,max31790";
+				reg = <0x27>;
+			};
+		};
+		i2c1mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		i2c1mux0ch4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			power-monitor@13 {
+				compatible = "infineon,xdp710";
+				reg = <0x13>;
+			};
+			power-monitor@1c {
+				compatible = "infineon,xdp710";
+				reg = <0x1c>;
+			};
+			power-monitor@42 {
+				compatible = "lltc,ltc4287";
+				reg = <0x42>;
+				shunt-resistor-micro-ohms = <100>;
+			};
+			power-monitor@43 {
+				compatible = "lltc,ltc4287";
+				reg = <0x43>;
+				shunt-resistor-micro-ohms = <100>;
+			};
+		};
+		i2c1mux0ch5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+
+			// PDB FRU EEPROM
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			// PDB TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+		};
+		i2c1mux0ch6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+
+			// PDB IOEXP
+			io_expander5: gpio@27 {
+				compatible = "nxp,pca9554";
+				reg = <0x27>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// OSFP IOEXP
+			io_expander6: gpio@25 {
+				compatible = "nxp,pca9555";
+				reg = <0x25>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// OSFP FRU EEPROM
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+		i2c1mux0ch7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			// FIO FRU EEPROM
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			// FIO TEMP SENSOR
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			// FIO REMOTE TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	// Module 0 IOEXP
+	io_expander0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// Module 1 IOEXP
+	io_expander1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// HMC IOEXP
+	io_expander2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// Module 0 EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Module 1 EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c5mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c5mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c5mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+		i2c5mux0ch4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+		i2c5mux0ch5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+		i2c5mux0ch6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			// HDD FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+		i2c5mux0ch7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	// BMC IOEXP on Module 0
+	io_expander3: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	rtc@6f {
+		compatible = "nuvoton,nct3018y";
+		reg = <0x6f>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	// SCM CPLD IOEXP
+	io_expander4: gpio@4f {
+		compatible = "nxp,pca9555";
+		reg = <0x4f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// SCM TEMP SENSOR
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	// SCM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU EEPROM
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC0 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC0 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	multi-master;
+
+	// Module 1 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Secondary CBC FRU EEPROM
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	multi-master;
+
+	// Module 0 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Primary CBC FRU EEPROM
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+
+	// HMC FRU EEPROM
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	// PDB CPLD IOEXP 0x10
+	io_expander9: gpio@10 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x10>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x11
+	io_expander10: gpio@11 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x11>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x12
+	io_expander11: gpio@12 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x13
+	io_expander12: gpio@13 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x14
+	io_expander13: gpio@14 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x14>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x15
+	io_expander14: gpio@15 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x15>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC1 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC1 FRU EEPROM
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&adc0 {
+	vref-supply = <&p1v8_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref-supply = <&p2v5_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&pinctrl {
+	pinctrl_ncsi3_default: ncsi3_default {
+		function = "RMII3";
+		groups = "NCSI3";
+	};
+
+	pinctrl_ncsi4_default: ncsi4_default {
+		function = "RMII4";
+		groups = "NCSI4";
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+			"BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+			"IOEXP_INT_L","FM_ID_LED",
+			"","",
+	/*C0-C7*/	"","","","",
+			"PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+			"","BMC_I2C_SSIF_ALERT_L",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","",
+			"FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+	/*H0-H7*/	"PWR_BRAKE_L","RUN_POWER_EN",
+			"SHDN_FORCE_L","SHDN_REQ_L",
+			"","","","",
+	/*I0-I7*/	"","","","",
+			"","FLASH_WP_STATUS",
+			"FM_PDB_HEALTH_N","RUN_POWER_PG",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"PCIE_EP_RST_EN","BMC_FRU_WP",
+			"SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+			"STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+			"CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+			"PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+			"","USBDBG_IPMI_EN_L",
+	/*P0-P7*/	"PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+			"ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+			"host0-ready","BMC_READY_CPLD","","BMC_HEARTBEAT_N",
+	/*Q0-Q7*/	"IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+			"UART_MUX_SEL","I2C_MUX_RESET_L",
+			"RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+			"CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+	/*R0-R7*/	"THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+			"CPU_BOOT_DONE","PMBUS_GNT_L",
+			"CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+			"PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+	/*S0-S7*/	"","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+			"FM_BMC_DEBUG_SW_N","UID_LED_N",
+			"SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+			"BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+			"SMB_BMC_TMP_ALERT","PWR_LED_N",
+			"SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","RST_BMC_SELF_HW",
+			"FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+			"","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&io_expander0 {
+	gpio-line-names =
+		"FPGA_THERM_OVERT_L","FPGA_READY_BMC",
+		"HMC_BMC_DETECT","HMC_PGOOD",
+		"","BMC_SELF_PWR_CYCLE",
+		"FPGA_EROT_FATAL_ERROR_L","WP_HW_EXT_CTRL_L",
+		"EROT_FPGA_RST_L","FPGA_EROT_RECOVERY_L",
+		"BMC_EROT_FPGA_SPI_MUX_SEL","USB2_HUB_RESET_L",
+		"NCSI_CS1_SEL","SGPIO_EN_L",
+		"B2B_IOEXP_INT_L","I2C_BUS_MUX_RESET_L";
+};
+
+&io_expander1 {
+	gpio-line-names =
+		"SEC_FPGA_THERM_OVERT_L","SEC_FPGA_READY_BMC",
+		"","",
+		"","",
+		"SEC_FPGA_EROT_FATAL_ERROR_L","SEC_WP_HW_EXT_CTRL_L",
+		"SEC_EROT_FPGA_RST_L","SEC_FPGA_EROT_RECOVERY_L",
+		"SEC_BMC_EROT_FPGA_SPI_MUX_SEL","",
+		"","",
+		"","SEC_I2C_BUS_MUX_RESET_L";
+};
+
+&io_expander2 {
+	gpio-line-names =
+		"HMC_PRSNT_L","HMC_READY",
+		"HMC_EROT_FATAL_ERROR_L","I2C_MUX_SEL",
+		"HMC_EROT_SPI_MUX_SEL","HMC_EROT_RECOVERY_L",
+		"HMC_EROT_RST_L","GLOBAL_WP_HMC",
+		"FPGA_RST_L","USB2_HUB_RST",
+		"CPU_UART_MUX_SEL","",
+		"","","","";
+};
+
+&io_expander3 {
+	gpio-line-names =
+		"RTC_MUX_SEL","PCI_MUX_SEL","TPM_MUX_SEL","FAN_MUX-SEL",
+		"SGMII_MUX_SEL","DP_MUX_SEL","UPHY3_USB_SEL","NCSI_MUX_SEL",
+		"BMC_PHY_RST","RTC_CLR_L","BMC_12V_CTRL","PS_RUN_IO0_PG",
+		"","","","";
+};
+
+&io_expander4 {
+	gpio-line-names =
+		"stby_power_en_cpld","stby_power_gd_cpld","","",
+		"","","","",
+		"","","","",
+		"","","","";
+};
+
+&io_expander5 {
+	gpio-line-names =
+		"JTAG_MUX_SEL","IOX_BMC_RESET","","",
+		"","","","";
+};
+
+&io_expander6 {
+	gpio-line-names =
+		"OSFP_PHASE_ID0","OSFP_PHASE_ID1",
+		"OSFP_PHASE_ID2","OSFP_PHASE_ID3",
+		"","","","",
+		"OSFP_BOARD_ID0","OSFP_BOARD_ID1",
+		"OSFP_BOARD_ID2","PWRGD_P3V3_N1",
+		"PWRGD_P3V3_N2","","","";
+};
+
+&io_expander7 {
+	gpio-line-names =
+		"RST_CX7_0","RST_CX7_1",
+		"CX0_SSD0_PRSNT_L","CX1_SSD1_PRSNT_L",
+		"CX_BOOT_CMPLT_CX0","CX_BOOT_CMPLT_CX1",
+		"CX_TWARN_CX0_L","CX_TWARN_CX1_L",
+		"CX_OVT_SHDN_CX0","CX_OVT_SHDN_CX1",
+		"FNP_L_CX0","FNP_L_CX1",
+		"","MCU_GPIO","MCU_RST_N","MCU_RECOVERY_N";
+};
+
+&io_expander8 {
+	gpio-line-names =
+		"SEC_RST_CX7_0","SEC_RST_CX7_1",
+		"SEC_CX0_SSD0_PRSNT_L","SEC_CX1_SSD1_PRSNT_L",
+		"SEC_CX_BOOT_CMPLT_CX0","SEC_CX_BOOT_CMPLT_CX1",
+		"SEC_CX_TWARN_CX0_L","SEC_CX_TWARN_CX1_L",
+		"SEC_CX_OVT_SHDN_CX0","SEC_CX_OVT_SHDN_CX1",
+		"SEC_FNP_L_CX0","SEC_FNP_L_CX1",
+		"","SEC_MCU_GPIO","SEC_MCU_RST_N","SEC_MCU_RECOVERY_N";
+};
+
+&io_expander9 {
+	gpio-line-names =
+		"LEAK3_DETECT_R","LEAK1_DETECT_R",
+		"LEAK2_DETECT_R","LEAK0_DETECT_R",
+		"CHASSIS3_LEAK_Q_N_PLD","CHASSIS1_LEAK_Q_N_PLD",
+		"CHASSIS2_LEAK_Q_N_PLD","CHASSIS0_LEAK_Q_N_PLD",
+		"P12V_AUX_FAN_ALERT_PLD_N","P12V_AUX_FAN_OC_PLD_N",
+		"P12V_AUX_FAN_FAULT_PLD_N","LEAK_DETECT_RMC_N_R",
+		"RSVD_RMC_GPIO3_R","SMB_RJ45_FIO_TMP_ALERT",
+		"","";
+};
+
+&io_expander10 {
+	gpio-line-names =
+		"FM_P12V_NIC1_FLTB_R_N","FM_P3V3_NIC1_FAULT_R_N",
+		"OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+		"P12V_AUX_NIC1_SENSE_ALERT_R_N",
+		"FM_P12V_NIC0_FLTB_R_N","FM_P3V3_NIC0_FAULT_R_N",
+		"OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N",
+		"P12V_AUX_NIC0_SENSE_ALERT_R_N",
+		"P12V_AUX_PSU_SMB_ALERT_R_L","P12V_SCM_SENSE_ALERT_R_N",
+		"NODEB_PSU_SMB_ALERT_R_L","NODEA_PSU_SMB_ALERT_R_L",
+		"P52V_SENSE_ALERT_PLD_N","P48V_HS2_FAULT_N_PLD",
+		"P48V_HS1_FAULT_N_PLD","";
+};
+
+&io_expander11 {
+	gpio-line-names =
+		"FAN_7_PRESENT_N","FAN_6_PRESENT_N",
+		"FAN_5_PRESENT_N","FAN_4_PRESENT_N",
+		"FAN_3_PRESENT_N","FAN_2_PRESENT_N",
+		"FAN_1_PRESENT_N","FAN_0_PRESENT_N",
+		"PRSNT_CHASSIS3_LEAK_CABLE_R_N","PRSNT_CHASSIS1_LEAK_CABLE_R_N",
+		"PRSNT_CHASSIS2_LEAK_CABLE_R_N","PRSNT_CHASSIS0_LEAK_CABLE_R_N",
+		"PRSNT_RJ45_FIO_N_R","PRSNT_HDDBD_POWER_CABLE_N",
+		"PRSNT_OSFP_POWER_CABLE_N","";
+};
+
+&io_expander12 {
+	gpio-line-names =
+		"RST_OCP_V3_1_R_N","NIC0_PERST_N",
+		"OCP_SFF_PERST_FROM_HOST_ISO_PLD_N","OCP_SFF_MAIN_PWR_EN",
+		"FM_OCP_SFF_PWR_GOOD_PLD","OCP_SFF_AUX_PWR_PLD_EN_R",
+		"HP_LVC3_OCP_V3_1_PWRGD_PLD","HP_OCP_V3_1_HSC_PWRGD_PLD_R",
+		"RST_OCP_V3_2_R_N","NIC1_PERST_N",
+		"OCP_V3_2_PERST_FROM_HOST_ISO_PLD_N","OCP_V3_2_MAIN_PWR_EN",
+		"FM_OCP_V3_2_PWR_GOOD_PLD","OCP_V3_2_AUX_PWR_PLD_EN_R",
+		"HP_LVC3_OCP_V3_2_PWRGD_PLD","HP_OCP_V3_2_HSC_PWRGD_PLD_R";
+};
+
+&io_expander13 {
+	gpio-line-names =
+		"NODEA_NODEB_PWOK_PLD_ISO_R","PWR_EN_NICS",
+		"PWRGD_P12V_AUX_FAN_PLD","P12V_AUX_FAN_EN_PLD",
+		"PWRGD_P3V3_AUX_PLD","PWRGD_P12V_AUX_PLD_ISO_R",
+		"FM_MAIN_PWREN_FROM_RMC_R","FM_MAIN_PWREN_RMC_EN_ISO_R",
+		"PWRGD_RMC_R","PWRGD_P12V_AUX_FAN_PLD",
+		"P12V_AUX_FAN_EN_PLD","FM_SYS_THROTTLE_N",
+		"HP_LVC3_OCP_V3_2_PRSNT2_PLD_N","HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+		"","";
+};
+
+&io_expander14 {
+	gpio-line-names =
+		"","","","","","","","",
+		"FM_BOARD_BMC_SKU_ID3","FM_BOARD_BMC_SKU_ID2",
+		"FM_BOARD_BMC_SKU_ID1","FM_BOARD_BMC_SKU_ID0",
+		"FAB_BMC_REV_ID2","FAB_BMC_REV_ID1",
+		"FAB_BMC_REV_ID0","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
new file mode 100644
index 000000000000..ecef44d89977
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
@@ -0,0 +1,1283 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Clemente BMC";
+	compatible = "facebook,clemente-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		i2c16 = &i2c1mux0ch0;
+		i2c17 = &i2c1mux0ch1;
+		i2c18 = &i2c1mux0ch2;
+		i2c19 = &i2c1mux0ch3;
+		i2c20 = &i2c1mux0ch4;
+		i2c21 = &i2c1mux0ch5;
+		i2c22 = &i2c1mux0ch6;
+		i2c23 = &i2c1mux0ch7;
+		i2c24 = &i2c0mux0ch0;
+		i2c25 = &i2c0mux0ch1;
+		i2c26 = &i2c0mux0ch2;
+		i2c27 = &i2c0mux0ch3;
+		i2c28 = &i2c0mux1ch0;
+		i2c29 = &i2c0mux1ch1;
+		i2c30 = &i2c0mux1ch2;
+		i2c31 = &i2c0mux1ch3;
+		i2c32 = &i2c0mux2ch0;
+		i2c33 = &i2c0mux2ch1;
+		i2c34 = &i2c0mux2ch2;
+		i2c35 = &i2c0mux2ch3;
+		i2c36 = &i2c0mux3ch0;
+		i2c37 = &i2c0mux3ch1;
+		i2c38 = &i2c0mux3ch2;
+		i2c39 = &i2c0mux3ch3;
+		i2c40 = &i2c0mux4ch0;
+		i2c41 = &i2c0mux4ch1;
+		i2c42 = &i2c0mux4ch2;
+		i2c43 = &i2c0mux4ch3;
+		i2c44 = &i2c0mux5ch0;
+		i2c45 = &i2c0mux5ch1;
+		i2c46 = &i2c0mux5ch2;
+		i2c47 = &i2c0mux5ch3;
+		i2c48 = &i2c0mux0ch1mux0ch0;
+		i2c49 = &i2c0mux0ch1mux0ch1;
+		i2c50 = &i2c0mux0ch1mux0ch2;
+		i2c51 = &i2c0mux0ch1mux0ch3;
+		i2c52 = &i2c0mux3ch1mux0ch0;
+		i2c53 = &i2c0mux3ch1mux0ch1;
+		i2c54 = &i2c0mux3ch1mux0ch2;
+		i2c55 = &i2c0mux3ch1mux0ch3;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "bmc_ready_noled";
+			gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+
+		led-3 {
+			label = "bmc_ready_cpld_noled";
+			gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p2v5_bmc_aux";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xbb000000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>;
+		};
+	};
+
+	spi1_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&adc0 {
+	vref-supply = <&p1v8_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref-supply = <&p2v5_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+			"BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+			"IOEXP_INT_L","FM_ID_LED",
+			"","",
+	/*C0-C7*/	"BMC_GPIOC0","","","",
+			"PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+			"","BMC_I2C_SSIF_ALERT_L",
+	/*D0-D7*/	"","","","","BMC_GPIOD4","","","",
+	/*E0-E7*/	"BMC_GPIOE0","BMC_GPIOE1","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","",
+			"FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+	/*H0-H7*/	"PWR_BRAKE_L","RUN_POWER_EN",
+			"SHDN_FORCE_L","SHDN_REQ_L",
+			"","","","",
+	/*I0-I7*/	"","","","",
+			"","FLASH_WP_STATUS",
+			"FM_PDB_HEALTH_N","RUN_POWER_PG",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"PCIE_EP_RST_EN","BMC_FRU_WP",
+			"SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+			"STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+			"CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+			"PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+			"","USBDBG_IPMI_EN_L",
+	/*P0-P7*/	"PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+			"ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+			"host0-ready","BMC_READY_CPLD","BMC_GPIOP6","BMC_HEARTBEAT_N",
+	/*Q0-Q7*/	"IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+			"UART_MUX_SEL","I2C_MUX_RESET_L",
+			"RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+			"CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+	/*R0-R7*/	"THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+			"CPU_BOOT_DONE","PMBUS_GNT_L",
+			"CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+			"PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+	/*S0-S7*/	"","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+			"FM_BMC_DEBUG_SW_N","UID_LED_N",
+			"SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+			"BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+			"SMB_BMC_TMP_ALERT","PWR_LED_N",
+			"SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","RST_BMC_SELF_HW",
+			"FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+			"BMC_GPIOY4","BMC_GPIOY5","","",
+	/*Z0-Z7*/	"","","","","","","BMC_GPIOZ6","BMC_GPIOZ7";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B3*/	"","","","",
+	/*18B4-18B7*/	"FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+	/*18C0-18C7*/	"","","PI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","AC_PWR_BMC_BTN_N","","","","";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// HDD FRU EEPROM
+			eeprom@56 {
+				compatible = "atmel,24c128";
+				reg = <0x56>;
+			};
+
+			// E1.S Backplane
+			i2c0mux0ch1mux0: i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				reg = <0x74>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c0mux0ch1mux0ch0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c0mux0ch1mux0ch1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c0mux0ch1mux0ch2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c0mux0ch1mux0ch3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		i2c0mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux1ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux1ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 0 IOEXP
+			io_expander7: gpio@20 {
+				compatible = "nxp,pca9535";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"RST_CX7_0",
+					"RST_CX7_1",
+					"CX0_SSD0_PRSNT_L",
+					"CX1_SSD1_PRSNT_L",
+					"CX_BOOT_CMPLT_CX0",
+					"CX_BOOT_CMPLT_CX1",
+					"CX_TWARN_CX0_L",
+					"CX_TWARN_CX1_L",
+					"CX_OVT_SHDN_CX0",
+					"CX_OVT_SHDN_CX1",
+					"FNP_L_CX0",
+					"FNP_L_CX1",
+					"",
+					"MCU_GPIO",
+					"MCU_RST_N",
+					"MCU_RECOVERY_N";
+			};
+
+			// IO Mezz 0 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			// OSFP 0 FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+		};
+
+		i2c0mux1ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux1ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux2ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// IOB0 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c0mux2ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c0mux2ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux2ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			// IOB0 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux3ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux3ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// E1.S Backplane HDD FRU EEPROM
+			eeprom@56 {
+				compatible = "atmel,24c128";
+				reg = <0x56>;
+			};
+
+			// E1.S Backplane MUX
+			i2c0mux3ch1mux0: i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				reg = <0x74>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c0mux3ch1mux0ch0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c0mux3ch1mux0ch1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c0mux3ch1mux0ch2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c0mux3ch1mux0ch3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		i2c0mux3ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux3ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux4ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux4ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 1 IOEXP
+			io_expander8: gpio@21 {
+				compatible = "nxp,pca9535";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"SEC_RST_CX7_0",
+					"SEC_RST_CX7_1",
+					"SEC_CX0_SSD0_PRSNT_L",
+					"SEC_CX1_SSD1_PRSNT_L",
+					"SEC_CX_BOOT_CMPLT_CX0",
+					"SEC_CX_BOOT_CMPLT_CX1",
+					"SEC_CX_TWARN_CX0_L",
+					"SEC_CX_TWARN_CX1_L",
+					"SEC_CX_OVT_SHDN_CX0",
+					"SEC_CX_OVT_SHDN_CX1",
+					"SEC_FNP_L_CX0",
+					"SEC_FNP_L_CX1",
+					"",
+					"SEC_MCU_GPIO",
+					"SEC_MCU_RST_N",
+					"SEC_MCU_RECOVERY_N";
+			};
+
+			// IO Mezz 1 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			// OSFP 1 FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+		};
+
+		i2c0mux4ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux4ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux5ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// IOB1 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c0mux5ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c0mux5ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux5ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			// IOB1 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	// PDB
+	power-monitor@12 {
+		compatible = "ti,lm5066i";
+		reg = <0x12>;
+	};
+
+	// PDB
+	power-monitor@14 {
+		compatible = "ti,lm5066i";
+		reg = <0x14>;
+	};
+
+	// Module 0
+	fanctl0: fan-controller@20{
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	// Module 0
+	fanctl1: fan-controller@23{
+		compatible = "maxim,max31790";
+		reg = <0x23>;
+	};
+
+	// Module 1
+	fanctl2: fan-controller@2c{
+		compatible = "maxim,max31790";
+		reg = <0x2c>;
+	};
+
+	// Module 1
+	fanctl3: fan-controller@2f{
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+
+	// Module 0 Leak Sensor
+	adc@34 {
+		compatible = "maxim,max1363";
+		reg = <0x34>;
+	};
+
+	// Module 1 Leak Sensor
+	adc@35 {
+		compatible = "maxim,max1363";
+		reg = <0x35>;
+	};
+
+	// PDB TEMP SENSOR
+	temperature-sensor@4e {
+		compatible = "ti,tmp1075";
+		reg = <0x4e>;
+	};
+
+	// PDB FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	// PDB
+	vrm@60 {
+		compatible = "renesas,raa228004";
+		reg = <0x60>;
+	};
+
+	// PDB
+	vrm@61 {
+		compatible = "renesas,raa228004";
+		reg = <0x61>;
+	};
+
+	// Interposer
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c1mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		i2c1mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+
+		i2c1mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		i2c1mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+		i2c1mux0ch4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		i2c1mux0ch5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+
+			// Interposer TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+
+			// Interposer FRU EEPROM
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+		};
+
+		i2c1mux0ch6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+
+			// Interposer IOEXP
+			io_expander5: gpio@27 {
+				compatible = "nxp,pca9554";
+				reg = <0x27>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"JTAG_MUX_SEL",
+					"IOX_BMC_RESET",
+					"RTC_CLR_L",
+					"RTC_U77_ALRT_N",
+					"",
+					"PSU_ALERT_N",
+					"",
+					"RST_P12V_STBY_N";
+			};
+		};
+
+		i2c1mux0ch7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			// FIO TEMP SENSOR
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			// FIO FRU EEPROM
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	// Module 0, Expander @0x20
+	io_expander0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FPGA_THERM_OVERT_L-I",
+			"FPGA_READY_BMC-I",
+			"HMC_BMC_DETECT-O",
+			"HMC_PGOOD-O",
+			"",
+			"BMC_STBY_CYCLE-O",
+			"FPGA_EROT_FATAL_ERROR_L-I",
+			"WP_HW_EXT_CTRL_L-O",
+			"EROT_FPGA_RST_L-O",
+			"FPGA_EROT_RECOVERY_L-O",
+			"BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"USB2_HUB_RST_L-O",
+			"",
+			"SGPIO_EN_L-O",
+			"B2B_IOEXP_INT_L-I",
+			"I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// Module 1, Expander @0x21
+	io_expander1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"SEC_FPGA_THERM_OVERT_L",
+			"SEC_FPGA_READY_BMC",
+			"SEC_HMC_BMC_DETECT",
+			"SEC_HMC_PGOOD",
+			"",
+			"SEC_BMC_SELF_POWER_CYCLE",
+			"SEC_SEC_FPGA_EROT_FATAL_ERROR_L",
+			"SEC_WP_HW_EXT_CTRL_L",
+			"SEC_EROT_FPGA_RST_L",
+			"SEC_FPGA_EROT_RECOVERY_L",
+			"SEC_BMC_EROT_FPGA_SPI_MUX_SEL",
+			"SEC_USB2_HUB_RST_L",
+			"",
+			"SEC_SGPIO_EN_L",
+			"SEC_IOB_IOEXP_INT_L",
+			"SEC_I2C_BUS_MUX_RESET_L";
+	};
+
+	// HMC Expander @0x27
+	io_expander2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"HMC_PRSNT_L-I",
+			"HMC_READY-I",
+			"HMC_EROT_FATAL_ERROR_L-I",
+			"I2C_MUX_SEL-O",
+			"HMC_EROT_SPI_MUX_SEL-O",
+			"HMC_EROT_RECOVERY_L-O",
+			"HMC_EROT_RST_L-O",
+			"GLOBAL_WP_HMC-O",
+			"FPGA_RST_L-O",
+			"USB2_HUB_RST-O",
+			"CPU_UART_MUX_SEL-O",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// Module 0 Aux EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Module 1 Aux EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	io_expander3: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"RTC_MUX_SEL",
+			"PCI_MUX_SEL",
+			"TPM_MUX_SEL",
+			"FAN_MUX-SEL",
+			"SGMII_MUX_SEL",
+			"DP_MUX_SEL",
+			"UPHY3_USB_SEL",
+			"NCSI_MUX_SEL",
+			"BMC_PHY_RST",
+			"RTC_CLR_L",
+			"BMC_12V_CTRL",
+			"PS_RUN_IO0_PG",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	rtc@6f {
+		compatible = "nuvoton,nct3018y";
+		reg = <0x6f>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+	// SCM TEMP SENSOR BOARD
+	temperature-sensor@4b {
+		compatible = "national,lm75b";
+		reg = <0x4b>;
+	};
+
+	// SCM CPLD IOEXP
+	io_expander4: gpio@4f {
+		compatible = "nxp,pca9555";
+		reg = <0x4f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"stby_power_en_cpld",
+			"stby_power_gd_cpld",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// SCM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU EEPROM
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC0 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC0 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	multi-master;
+
+	// HPM 1 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+	// CBC 2 FRU
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+	// CBC 3 FRU
+	eeprom@55 {
+		compatible = "atmel,24c02";
+		reg = <0x55>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	multi-master;
+
+	// HPM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// CBC 0 FRU
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+
+	// CBC 1 FRU
+	eeprom@55 {
+		compatible = "atmel,24c02";
+		reg = <0x55>;
+	};
+
+	// HMC FRU EEPROM
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	// PDB CPLD IOEXP 0x10
+	io_expander9: gpio@10 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x10>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"wSequence_Latch_State_N",
+			"wP12V_N1N2_RUNTIME_FLT_N",
+			"wP12V_FAN_RUNTIME_FLT_N",
+			"wP12V_AUX_RUNTIME_FLT_N",
+			"wHost_PERST_SEQPWR_FLT_N",
+			"wP12V_N1N2_SEQPWR_FLT_N",
+			"wP12V_FAN_SEQPWR_FLT_N",
+			"wP12V_AUX_SEQPWR_FLT_N",
+			"wP12V_RUNTIME_FLT_NIC1_N",
+			"wAUX_RUNTIME_FLT_NIC1_N",
+			"wP12V_SEQPWR_FLT_NIC1_N",
+			"wAUX_SEQPWR_FLT_NIC1_N",
+			"wP12V_RUNTIME_FLT_NIC0_N",
+			"wAUX_RUNTIME_FLT_NIC0_N",
+			"wP12V_SEQPWR_FLT_NIC0_N",
+			"wAUX_SEQPWR_FLT_NIC0_N";
+	};
+
+	// PDB CPLD IOEXP 0x11
+	io_expander10: gpio@11 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x11>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FM_P12V_NIC1_FLTB_R_N",
+			"FM_P3V3_NIC1_FAULT_R_N",
+			"FM_P12V_NIC0_FLTB_R_N",
+			"FM_P3V3_NIC0_FAULT_R_N",
+			"P48V_HS2_FAULT_N_PLD",
+			"P48V_HS1_FAULT_N_PLD",
+			"P12V_AUX_FAN_OC_PLD_N",
+			"P12V_AUX_FAN_FAULT_PLD_N",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"FM_SYS_THROTTLE_N",
+			"OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+			"OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N";
+	};
+
+	// PDB CPLD IOEXP 0x12
+	io_expander11: gpio@12 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"P12V_AUX_PSU_SMB_ALERT_R_L",
+			"P12V_SCM_SENSE_ALERT_R_N",
+			"P12V_AUX_NIC1_SENSE_ALERT_R_N",
+			"P12V_AUX_NIC0_SENSE_ALERT_R_N",
+			"NODEB_PSU_SMB_ALERT_R_L",
+			"NODEA_PSU_SMB_ALERT_R_L",
+			"P12V_AUX_FAN_ALERT_PLD_N",
+			"P52V_SENSE_ALERT_PLD_N",
+			"PRSNT_RJ45_FIO_N_R",
+			"FM_MAIN_PWREN_RMC_EN_ISO_R",
+			"CHASSIS3_LEAK_Q_N_PLD",
+			"CHASSIS2_LEAK_Q_N_PLD",
+			"CHASSIS1_LEAK_Q_N_PLD",
+			"CHASSIS0_LEAK_Q_N_PLD",
+			"",
+			"SMB_RJ45_FIO_TMP_ALERT";
+	};
+
+	// PDB CPLD IOEXP 0x13
+	io_expander12: gpio@13 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FAN_7_PRESENT_N",
+			"FAN_6_PRESENT_N",
+			"FAN_5_PRESENT_N",
+			"FAN_4_PRESENT_N",
+			"FAN_3_PRESENT_N",
+			"FAN_2_PRESENT_N",
+			"FAN_1_PRESENT_N",
+			"FAN_0_PRESENT_N",
+			"HP_LVC3_OCP_V3_2_PRSNT2_PLD_N",
+			"HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+			"PRSNT_HDDBD_POWER_CABLE_N",
+			"PRSNT_OSFP0_POWER_CABLE_N",
+			"PRSNT_CHASSIS3_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS2_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS1_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS0_LEAK_CABLE_R_N";
+	};
+
+	// PDB CPLD IOEXP 0x14
+	io_expander13: gpio@14 {
+		compatible = "nxp,pca9555";
+		reg = <0x14>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"rmc_en_dc_pwr_on",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"leak_config_0",
+			"leak_config_1",
+			"leak_config_2",
+			"leak_config_3",
+			"mfg_led_test_mode_l",
+			"small_leak_err_inj",
+			"large_leak_err_inj",
+			"";
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC1 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC1 FRU EEPROM
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi4_default>;
+	use-ncsi;
+};
+
+&udma {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts
index 90a3f485c67a..24153868cc00 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts
@@ -328,7 +328,7 @@
 &i2c1 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -341,7 +341,7 @@
 			#size-cells = <0>;
 			reg = <0>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -390,7 +390,7 @@
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -446,7 +446,7 @@
 			#size-cells = <0>;
 			reg = <1>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -495,7 +495,7 @@
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -551,7 +551,7 @@
 			#size-cells = <0>;
 			reg = <2>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -600,7 +600,7 @@
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -656,7 +656,7 @@
 			#size-cells = <0>;
 			reg = <3>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -705,7 +705,7 @@
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -761,7 +761,7 @@
 			#size-cells = <0>;
 			reg = <4>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -810,7 +810,7 @@
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -866,7 +866,7 @@
 			#size-cells = <0>;
 			reg = <5>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -915,7 +915,7 @@
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -971,7 +971,7 @@
 			#size-cells = <0>;
 			reg = <6>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1020,7 +1020,7 @@
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1076,7 +1076,7 @@
 			#size-cells = <0>;
 			reg = <7>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1125,7 +1125,7 @@
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1183,7 +1183,7 @@
 &i2c2 {
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1281,7 +1281,7 @@
 &i2c8 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1294,7 +1294,7 @@
 			#size-cells = <0>;
 			reg = <0>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1350,7 +1350,7 @@
 			#size-cells = <0>;
 			reg = <1>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1406,7 +1406,7 @@
 			#size-cells = <0>;
 			reg = <2>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1462,7 +1462,7 @@
 			#size-cells = <0>;
 			reg = <3>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
new file mode 100644
index 000000000000..58c107a1b6cf
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+
+/dts-v1/;
+
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Darwin BMC";
+	compatible = "facebook,darwin-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c0 {
+	eeprom@50 {
+		compatible = "atmel,24c512";
+		reg = <0x50>;
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		     &pinctrl_adc2_default &pinctrl_adc3_default
+		     &pinctrl_adc4_default &pinctrl_adc5_default
+		     &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		     &pinctrl_adc10_default &pinctrl_adc11_default
+		     &pinctrl_adc12_default &pinctrl_adc13_default
+		     &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
index 27b43fe099f1..ff1009ea1c49 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
@@ -44,7 +44,7 @@
 		stdout-path = &uart5;
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		num-chipselects = <1>;
 		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
 	};
@@ -65,7 +65,7 @@
 };
 
 &i2c2 {
-	i2c-switch@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -123,7 +123,7 @@
 };
 
 &i2c5 {
-	i2c-switch@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -183,3 +183,33 @@
 &i2c11 {
 	status = "okay";
 };
+
+/*
+ * BMC's "mac3" controller is connected to BCM53134P's IMP_RGMII port
+ * directly (fixed link, no PHY in between).
+ * Note: BMC's "mdio0" controller is connected to BCM53134P's MDIO
+ * interface, and the MDIO channel will be enabled in dts later, when
+ * BCM53134 is added to "bcm53xx" DSA driver.
+ */
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
new file mode 100644
index 000000000000..aa9576d8ab56
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
@@ -0,0 +1,1256 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Fuji BMC (64MB Datastore)";
+	compatible = "facebook,fuji-data64-bmc", "aspeed,ast2600";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0077) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * PCA9548 (24-0071) provides 8 channels connecting to
+		 * PDB-Left.
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * PCA9548 (25-0072) provides 8 channels connecting to
+		 * PDB-Right.
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+
+		/*
+		 * PCA9548 (26-0076) provides 8 channels connecting to
+		 * FCM1.
+		 */
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * PCA9548 (27-0076) provides 8 channels connecting to
+		 * FCM2.
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+
+		/*
+		 * PCA9548 (40-0076) provides 8 channels connecting to
+		 * PIM1.
+		 */
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * PCA9548 (41-0076) provides 8 channels connecting to
+		 * PIM2.
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+
+		/*
+		 * PCA9548 (42-0076) provides 8 channels connecting to
+		 * PIM3.
+		 */
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * PCA9548 (43-0076) provides 8 channels connecting to
+		 * PIM4.
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+
+		/*
+		 * PCA9548 (44-0076) provides 8 channels connecting to
+		 * PIM5.
+		 */
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * PCA9548 (45-0076) provides 8 channels connecting to
+		 * PIM6.
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+
+		/*
+		 * PCA9548 (46-0076) provides 8 channels connecting to
+		 * PIM7.
+		 */
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * PCA9548 (47-0076) provides 8 channels connecting to
+		 * PIM8.
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <3>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+			   <0>,	/* device reg=<1> does not exist */
+			   <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+
+		eeprom@2 {
+			compatible = "atmel,at93c46d";
+			spi-max-frequency = <250000>;
+			data-size = <16>;
+			spi-cs-high;
+			reg = <2>;
+		};
+	};
+};
+
+&fmc {
+	flash@0 {
+		/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128-data64.dtsi"
+	};
+};
+
+&i2c0 {
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c2 {
+	/*
+	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+	 * Controller Module).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adm1278@10 {
+				compatible = "adi,adm1278";
+				reg = <0x10>;
+				shunt-resistor-micro-ohms = <1500>;
+			};
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c8 {
+	/*
+	 * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					lp5012@14 {
+						compatible = "ti,lp5012";
+						reg = <0x14>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						multi-led@0 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <0>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "sys";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@1 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <1>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "fan";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@2 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <2>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "psu";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@3 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <3>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "smb";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+					};
+				};
+
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	/*
+	 * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@13 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0d>;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
new file mode 100644
index 000000000000..5dc2a165e441
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+#include "aspeed-bmc-facebook-fuji-data64.dts"
+
+/ {
+	model = "Facebook Fuji BMC";
+	compatible = "facebook,fuji-bmc", "aspeed,ast2600";
+};
+
+&fmc {
+	flash@0 {
+		/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128.dtsi"
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dts
index 60e875ac2461..60e875ac2461 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dts
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
new file mode 100644
index 000000000000..49914a4a179f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Greatlakes BMC";
+	compatible = "facebook,greatlakes-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 2>, <&adc1 3>, <&adc1 4>,
+				<&adc1 5>, <&adc1 6>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	no-hw-checksum;
+	use-ncsi;
+	mellanox,multi-host;
+	ncsi-ctrl,start-redo-probe;
+	ncsi-ctrl,no-channel-monitor;
+	ncsi-package = <1>;
+	ncsi-channel = <1>;
+	ncsi-rexmit = <1>;
+	ncsi-timeout = <2>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc2";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+	mctp-controller;
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	// NIC EEPROM
+	eeprom@50 {
+		compatible = "st,24c32";
+		reg = <0x50>;
+	};
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	temperature-sensor@4f {
+		compatible = "national,lm75";
+		reg = <0x4f>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+			&pinctrl_adc2_default &pinctrl_adc3_default
+			&pinctrl_adc4_default &pinctrl_adc5_default
+			&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
+			&pinctrl_adc11_default &pinctrl_adc12_default
+			&pinctrl_adc13_default &pinctrl_adc14_default>;
+};
+
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
+
+	gpio-line-names =
+	/*A0-A7*/ "","","","","","","","",
+	/*B0-B7*/ "power-bmc-nic","presence-ocp-debug",
+		  "power-bmc-slot1","power-bmc-slot2",
+		  "power-bmc-slot3","power-bmc-slot4","","",
+	/*C0-C7*/ "presence-ocp-nic","","","reset-cause-nic-primary",
+		  "reset-cause-nic-secondary","","","",
+	/*D0-D7*/ "","","","","","","","",
+	/*E0-E7*/ "","","","","","","","",
+	/*F0-F7*/ "slot1-bmc-reset-button","slot2-bmc-reset-button",
+		  "slot3-bmc-reset-button","slot4-bmc-reset-button",
+		  "","","","presence-emmc",
+	/*G0-G7*/ "","","","","","","","",
+	/*H0-H7*/ "","","","",
+		  "presence-mb-slot1","presence-mb-slot2",
+		  "presence-mb-slot3","presence-mb-slot4",
+	/*I0-I7*/ "","","","","","","bb-bmc-button","",
+	/*J0-J7*/ "","","","","","","","",
+	/*K0-K7*/ "","","","","","","","",
+	/*L0-L7*/ "","","","","","","","",
+	/*M0-M7*/ "","power-nic-bmc-enable","","usb-bmc-enable","","reset-cause-usb-hub","","",
+	/*N0-N7*/ "","","","","bmc-ready","","","",
+	/*O0-O7*/ "","","","","","","fan0-bmc-cpld-enable","fan1-bmc-cpld-enable",
+	/*P0-P7*/ "fan2-bmc-cpld-enable","fan3-bmc-cpld-enable",
+		  "reset-cause-pcie-slot1","reset-cause-pcie-slot2",
+		  "reset-cause-pcie-slot3","reset-cause-pcie-slot4","","",
+	/*Q0-Q7*/ "","","","","","","","",
+	/*R0-R7*/ "","","","","","","","",
+	/*S0-S7*/ "","","power-p5v-usb","presence-bmc-tpm","","","","",
+	/*T0-T7*/ "","","","","","","","",
+	/*U0-U7*/ "","","","","","","","GND",
+	/*V0-V7*/ "bmc-slot1-ac-button","bmc-slot2-ac-button",
+		  "bmc-slot3-ac-button","bmc-slot4-ac-button",
+		  "","","","",
+	/*W0-W7*/ "","","","","","","","",
+	/*X0-X7*/ "","","","","","","","",
+	/*Y0-Y7*/ "","","","reset-cause-emmc","","","","",
+	/*Z0-Z7*/ "","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/ "","","","","","","","",
+	/*18B0-18B7*/ "","","","","","","","",
+	/*18C0-18C7*/ "","","","","","","","",
+	/*18D0-18D7*/ "","","","","","","","",
+	/*18E0-18E3*/ "","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
new file mode 100644
index 000000000000..b733efe31e8d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -0,0 +1,822 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Harma";
+	compatible = "facebook,harma-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart4;
+		serial4 = &uart5;
+
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		spi1 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 124 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+// HOST BIOS Debug
+&uart1 {
+	status = "okay";
+};
+
+// SOL Host Console
+&uart2 {
+	status = "okay";
+	pinctrl-0 = <>;
+};
+
+// SOL BMC Console
+&uart4 {
+	status = "okay";
+	pinctrl-0 = <>;
+};
+
+// BMC Debug Console
+&uart5 {
+	status = "okay";
+};
+
+// MTIA
+&uart6 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+// BIOS Flash
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	pwm@5e {
+		compatible = "maxim,max31790";
+		reg = <0x5e>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina238";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina238";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina238";
+		reg = <0x44>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <1000>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	gpio@12 {
+		compatible = "nxp,pca9555";
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <116 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","fcb2-activate",
+		"","";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	// MB NIC FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	pwm@5e {
+		compatible = "maxim,max31790";
+		reg = <0x5e>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina238";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina238";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina238";
+		reg = <0x44>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <1000>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	gpio@12 {
+		compatible = "nxp,pca9555";
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <114 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","fcb1-activate",
+		"","";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux20: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			//Retimer Flash
+			eeprom@50 {
+				compatible = "atmel,24c2048";
+				reg = <0x50>;
+				pagesize = <128>;
+			};
+		};
+		imux21: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			retimer@24 {
+				compatible = "asteralabs,pt5161l";
+				reg = <0x24>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	// PDB FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	power-monitor@69 {
+		compatible = "pmbus";
+		reg = <0x69>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	power-monitor@44 {
+		compatible = "lltc,ltc4287";
+		reg = <0x44>;
+		shunt-resistor-micro-ohms = <250>;
+	};
+
+	power-monitor@40 {
+		compatible = "infineon,xdp710";
+		reg = <0x40>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <500>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux22: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+		};
+		imux23: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	mctp-controller;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@30 {
+		compatible = "nxp,pca9555";
+		reg = <0x30>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	gpio@31 {
+		compatible = "nxp,pca9555";
+		reg = <0x31>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PTTV FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	gpio@13 {
+		compatible = "nxp,pca9555";
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <222 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","health-mmc",
+		"","",
+		"","",
+		"","",
+		"","";
+	};
+
+	gpio@30 {
+		compatible = "nxp,pca9555";
+		reg = <0x30>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	gpio@31 {
+		compatible = "nxp,pca9555";
+		reg = <0x31>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// Aegis FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	retimer@24 {
+		compatible = "asteralabs,pt5161l";
+		reg = <0x24>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			power-sensor@20 {
+				compatible = "mps,mp5990";
+				reg = <0x20>;
+			};
+			power-monitor@61 {
+				compatible = "isil,isl69260";
+				reg = <0x61>;
+			};
+			power-monitor@62 {
+				compatible = "isil,isl69260";
+				reg = <0x62>;
+			};
+			power-monitor@63 {
+				compatible = "isil,isl69260";
+				reg = <0x63>;
+			};
+			power-monitor@64 {
+				compatible = "infineon,xdpe152c4";
+				reg = <0x64>;
+			};
+			power-monitor@66 {
+				compatible = "infineon,xdpe152c4";
+				reg = <0x66>;
+			};
+			power-monitor@68 {
+				compatible = "infineon,xdpe152c4";
+				reg = <0x68>;
+			};
+		};
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			//MB FRU
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			adc@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+		};
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+// To Debug card
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	// SCM FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","",
+			"bmc-spi-mux-select-0","led-identify","","",
+	/*C0-C7*/	"reset-cause-platrst","","","","",
+			"power-hsc-good","power-chassis-good","",
+	/*D0-D7*/	"","","sol-uart-select","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","",
+			"leakage-detect-alert","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"led-postcode-0","led-postcode-1",
+			"led-postcode-2","led-postcode-3",
+			"led-postcode-4","led-postcode-5",
+			"led-postcode-6","led-postcode-7",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"power-button","power-host-control",
+			"reset-button","","led-power","","","",
+	/*Q0-Q7*/
+			"","","","",
+			"","power-chassis-control","","uart-switch-button",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","led-identify-gate","",
+	/*V0-V7*/	"","","","",
+			"","",
+			"","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","presence-post-card","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/ "ac-power-button","","","","","","","",
+	/*18B0-18B7*/ "","","","","","","","",
+	/*18C0-18C7*/ "","","","","","","","",
+	/*18D0-18D7*/ "","","","","","","","",
+	/*18E0-18E3*/ "","","","","","","","";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out - in - out */
+	/*A0-A3 line 0-7*/
+	"presence-scm-cable","power-config-disable-e1s-0",
+	"","",
+	"","power-config-disable-e1s-1",
+	"","",
+	/*A4-A7 line 8-15*/
+	"","power-config-asic-module-enable",
+	"power-p3v3-standby","power-config-asic-power-good",
+	"power-p1v8-good","power-config-pdb-power-good",
+	"presence-cpu","smi-control-n",
+	/*B0-B3 line 16-23*/
+	"","nmi-control-n",
+	"power-pvdd33-s5","nmi-control-sync-flood-n",
+	"","",
+	"power-pvdd18-s5","",
+	/*B4-B7 line 24-31*/
+	"","FM_CPU_SP5R1",
+	"reset-cause-rsmrst","FM_CPU_SP5R2",
+	"","FM_CPU_SP5R3",
+	"","FM_CPU_SP5R4",
+	/*C0-C3 line 32-39*/
+	"","FM_CPU0_SA0",
+	"","FM_CPU0_SA1",
+	"","rt-cpu0-p0-enable",
+	"","rt-cpu0-p1-enable",
+	/*C4-C7 line 40-47*/
+	"","smb-rt-rom-p0-select",
+	"","smb-rt-rom-p1-select",
+	"","i3c-cpu-mux0-oe-n",
+	"","i3c-cpu-mux0-select",
+	/*D0-D3 line 48-55*/
+	"","i3c-cpu-mux1-oe-n",
+	"","i3c-cpu-mux1-select",
+	"","reset-control-bmc",
+	"","reset-control-cpu0-p0-mux",
+	/*D4-D7 line 56-63*/
+	"","reset-control-cpu0-p1-mux",
+	"","reset-control-e1s-mux",
+	"power-host-good","reset-control-mb-mux",
+	"host0-ready","reset-control-smb-e1s-0",
+	/*E0-E3 line 64-71*/
+	"","reset-control-smb-e1s-1",
+	"post-end-n","reset-control-srst",
+	"presence-e1s-0","reset-control-usb-hub",
+	"","reset-control",
+	/*E4-E7 line 72-79*/
+	"presence-e1s-1","reset-control-cpu-kbrst",
+	"","reset-control-platrst",
+	"","bmc-jtag-mux-select-0",
+	"","bmc-jtag-mux-select-1",
+	/*F0-F3 line 80-87*/
+	"","bmc-jtag-select",
+	"","bmc-ready-n",
+	"","bmc-ready-sgpio",
+	"","rt-cpu0-p0-force-enable",
+	/*F4-F7 line 88-95*/
+	"presence-asic-modules-0","rt-cpu0-p1-force-enable",
+	"presence-asic-modules-1","bios-debug-msg-disable",
+	"power-asic-good","uart-control-buffer-select",
+	"presence-cmm","ac-control-n",
+	/*G0-G3 line 96-103*/
+	"FM_CPU_CORETYPE2","",
+	"FM_CPU_CORETYPE1","rtc-battery-voltage-read-enable",
+	"FM_CPU_CORETYPE0","",
+	"FM_BOARD_REV_ID5","",
+	/*G4-G7 line 104-111*/
+	"FM_BOARD_REV_ID4","",
+	"FM_BOARD_REV_ID3","",
+	"FM_BOARD_REV_ID2","",
+	"FM_BOARD_REV_ID1","",
+	/*H0-H3 line 112-119*/
+	"FM_BOARD_REV_ID0","reset-control-cmos-clear",
+	"","","","","","",
+	/*H4-H7 line 120-127*/
+	"","",
+	"reset-control-pcie-expansion-3","",
+	"reset-control-pcie-expansion-2","",
+	"reset-control-pcie-expansion-1","",
+	/*I0-I3 line 128-135*/
+	"reset-control-pcie-expansion-0","",
+	"FM_EXP_SLOT_ID1","",
+	"FM_EXP_SLOT_ID0","",
+	"","",
+	/*I4-I7 line 136-143*/
+	"","","","","","","","",
+	/*J0-J3 line 144-151*/
+	"","","power-card-enable","","","","","",
+	/*J4-J7 line 152-159*/
+	"SLOT_ID_BCB_0","",
+	"SLOT_ID_BCB_1","",
+	"SLOT_ID_BCB_2","",
+	"SLOT_ID_BCB_3","",
+	/*K0-K3 line 160-167*/
+	"","","","","","","P0_I3C_APML_ALERT_L","",
+	/*K4-K7 line 168-175*/
+	"","","","","","","irq-uv-detect-alert","",
+	/*L0-L3 line 176-183*/
+	"irq-hsc-alert","",
+	"cpu0-prochot-alert","",
+	"cpu0-thermtrip-alert","",
+	"reset-cause-pcie","",
+	/*L4-L7 line 184-191*/
+	"pvdd11-ocp-alert","",
+	"power-fault-n","",
+	"asic0-card-type-detection0-n","",
+	"asic0-card-type-detection1-n","",
+	/*M0-M3 line 192-199*/
+	"asic0-card-type-detection2-n","",
+	"uart-switch-lsb","",
+	"uart-switch-msb","",
+	"power-12v-memory-good","",
+	/*M4-M7 line 200-207*/
+	"","","","","","","","",
+	/*N0-N3 line 208-215*/
+	"","","","","","","","",
+	/*N4-N7 line 216-223*/
+	"","","","","","","","",
+	/*O0-O3 line 224-231*/
+	"","",
+	"irq-pvddcore0-ocp-alert","",
+	"irq-pvddcore1-ocp-alert","",
+	"","",
+	/*O4-O7 line 232-239*/
+	"","","","","","","","",
+	/*P0-P3 line 240-247*/
+	"","","","","","","","",
+	/*P4-P7 line 248-255*/
+	"","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
new file mode 100644
index 000000000000..eb8d4b95596c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
@@ -0,0 +1,1619 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2023 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Minerva CMM";
+	compatible = "facebook,minerva-cmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		serial5 = &uart6;
+		/*
+		 * PCA9548 (2-0077) provides 8 channels connecting to
+		 * 6 pcs of FCB (Fan Controller Board).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		spi1 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = "serial5:57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "fan_status_led";
+			gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-4 {
+			label = "fan_fault_led_n";
+			gpios = <&leds_gpio 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-5 {
+			label = "bmc_ready_noled";
+			gpios = <&sgpiom0 141 (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+	};
+
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&uart6 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	power-monitor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@44 {
+		compatible = "lltc,ltc4287";
+		reg = <0x44>;
+		shunt-resistor-micro-ohms = <2000>;
+	};
+
+	power-monitor@43 {
+		compatible = "infineon,xdp710";
+		reg = <0x43>;
+	};
+
+	leds_gpio: gpio@19 {
+		compatible = "nxp,pca9555";
+		reg = <0x19>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@11 {
+		compatible = "nxp,pca9555";
+		reg = <0x11>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <238 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"PWRGD_P24V_SMPWROK", "P1V5_PWROK",
+		"P3V3_PWROK", "P5V_PWROK",
+		"P12V_SCM_PWROK", "P12V_PWROK",
+		"P24V_PWROK", "P48V_HSC_PWROK",
+		"ERR_GPIO_IRQ", "TMP75_ALERT_N",
+		"BMC_PWROK", "P12V_INA230_ALERT_N",
+		"P24V_INA230_ALERT_N","",
+		"P48V_HSC_ALERT_N", "P1V05_PWROK";
+	};
+
+	gpio@12 {
+		compatible = "nxp,pca9555";
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <240 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"P1V05_PWR_FAIL", "P1V5_PWR_FAIL",
+		"P24V_PWR_FAIL", "P24V_SM_PWR_FAIL",
+		"IRQ_NW0/1/2_N", "IRQ_NW3/4/5_N",
+		"RTC_INT_N_R", "ERR_GPIO_IRQ",
+		"", "",
+		"", "",
+		"", "",
+		"", "";
+	};
+
+	gpio@13 {
+		compatible = "nxp,pca9555";
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <242 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"", "",
+		"", "",
+		"", "",
+		"", "",
+		"RACKMON_A_1", "RACKMON_A_2",
+		"RACKMON_B_1", "RACKMON_B_2",
+		"", "",
+		"", "";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		// FCB 1
+		imux16: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN1_PWRGD_R", "P48V_FAN2_PWRGD_R",
+				"P48V_FAN3_PWRGD_R", "P48V_FAN4_PWRGD_R",
+				"FCB_1_P48V_ZONE0_PWRGD_R", "FCB_1_P48V_ZONE1_PWRGD_R",
+				"FCB_1_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN1_ALERT_N", "INA238_FAN2_ALERT_N",
+				"INA238_FAN3_ALERT_N", "INA238_FAN4_ALERT_N",
+				"FCB_1_TMP75_ALERT_N", "",
+				"", "",
+				"FAN1_PRSNT", "FAN2_PRSNT",
+				"FAN3_PRSNT", "FAN4_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN1_IL_TACH_ALERT", "FAN1_OL_TACH_ALERT",
+				"FAN2_IL_TACH_ALERT", "FAN2_OL_TACH_ALERT",
+				"FAN3_IL_TACH_ALERT", "FAN3_OL_TACH_ALERT",
+				"FAN4_IL_TACH_ALERT", "FAN4_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_1_P1V0_POWER_FAIL", "FCB_1_P1V8_POWER_FAIL",
+				"FCB_1_P48V_ZONE0_POWER_FAIL", "FAN1_POWER_FAIL",
+				"FAN2_POWER_FAIL", "FAN3_POWER_FAIL",
+				"FAN4_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 2
+		imux17: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN5_PWRGD_R", "P48V_FAN6_PWRGD_R",
+				"P48V_FAN7_PWRGD_R", "P48V_FAN8_PWRGD_R",
+				"FCB_2_P48V_ZONE0_PWRGD_R", "FCB_2_P48V_ZONE1_PWRGD_R",
+				"FCB_2_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN5_ALERT_N", "INA238_FAN6_ALERT_N",
+				"INA238_FAN7_ALERT_N", "INA238_FAN8_ALERT_N",
+				"FCB_2_TMP75_ALERT_N", "",
+				"", "",
+				"FAN5_PRSNT", "FAN6_PRSNT",
+				"FAN7_PRSNT", "FAN8_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN5_IL_TACH_ALERT", "FAN5_OL_TACH_ALERT",
+				"FAN6_IL_TACH_ALERT", "FAN6_OL_TACH_ALERT",
+				"FAN7_IL_TACH_ALERT", "FAN7_OL_TACH_ALERT",
+				"FAN8_IL_TACH_ALERT", "FAN8_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_2_P1V0_POWER_FAIL", "FCB_2_P1V8_POWER_FAIL",
+				"FCB_2_P48V_ZONE0_POWER_FAIL", "FAN5_POWER_FAIL",
+				"FAN6_POWER_FAIL", "FAN7_POWER_FAIL",
+				"FAN8_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 3
+		imux18: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN9_PWRGD_R", "P48V_FAN10_PWRGD_R",
+				"P48V_FAN11_PWRGD_R", "P48V_FAN12_PWRGD_R",
+				"FCB_3_P48V_ZONE0_PWRGD_R", "FCB_3_P48V_ZONE1_PWRGD_R",
+				"FCB_3_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN9_ALERT_N", "INA238_FAN10_ALERT_N",
+				"INA238_FAN11_ALERT_N", "INA238_FAN12_ALERT_N",
+				"FCB_3_TMP75_ALERT_N", "",
+				"", "",
+				"FAN9_PRSNT", "FAN10_PRSNT",
+				"FAN11_PRSNT", "FAN12_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN9_IL_TACH_ALERT", "FAN9_OL_TACH_ALERT",
+				"FAN10_IL_TACH_ALERT", "FAN10_OL_TACH_ALERT",
+				"FAN11_IL_TACH_ALERT", "FAN11_OL_TACH_ALERT",
+				"FAN12_IL_TACH_ALERT", "FAN12_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_3_P1V0_POWER_FAIL", "FCB_3_P1V8_POWER_FAIL",
+				"FCB_3_P48V_ZONE0_POWER_FAIL", "FAN9_POWER_FAIL",
+				"FAN10_POWER_FAIL", "FAN11_POWER_FAIL",
+				"FAN12_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 4
+		imux19: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN13_PWRGD_R", "P48V_FAN14_PWRGD_R",
+				"P48V_FAN15_PWRGD_R", "P48V_FAN16_PWRGD_R",
+				"FCB_4_P48V_ZONE0_PWRGD_R", "FCB_4_P48V_ZONE1_PWRGD_R",
+				"FCB_4_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN13_ALERT_N", "INA238_FAN14_ALERT_N",
+				"INA238_FAN15_ALERT_N", "INA238_FAN16_ALERT_N",
+				"FCB_4_TMP75_ALERT_N", "",
+				"", "",
+				"FAN13_PRSNT", "FAN14_PRSNT",
+				"FAN15_PRSNT", "FAN16_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN13_IL_TACH_ALERT", "FAN13_OL_TACH_ALERT",
+				"FAN14_IL_TACH_ALERT", "FAN14_OL_TACH_ALERT",
+				"FAN15_IL_TACH_ALERT", "FAN15_OL_TACH_ALERT",
+				"FAN16_IL_TACH_ALERT", "FAN16_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_4_P1V0_POWER_FAIL", "FCB_4_P1V8_POWER_FAIL",
+				"FCB_4_P48V_ZONE0_POWER_FAIL", "FAN13_POWER_FAIL",
+				"FAN14_POWER_FAIL", "FAN15_POWER_FAIL",
+				"FAN16_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 5
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN20_PWRGD_R", "P48V_FAN19_PWRGD_R",
+				"P48V_FAN18_PWRGD_R", "P48V_FAN17_PWRGD_R",
+				"FCB_5_P48V_ZONE0_PWRGD_R", "FCB_5_P48V_ZONE1_PWRGD_R",
+				"FCB_5_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN20_ALERT_N", "INA238_FAN19_ALERT_N",
+				"INA238_FAN18_ALERT_N", "INA238_FAN17_ALERT_N",
+				"FCB_5_TMP75_ALERT_N", "",
+				"", "",
+				"FAN20_PRSNT", "FAN19_PRSNT",
+				"FAN18_PRSNT", "FAN17_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN20_IL_TACH_ALERT", "FAN20_OL_TACH_ALERT",
+				"FAN19_IL_TACH_ALERT", "FAN19_OL_TACH_ALERT",
+				"FAN18_IL_TACH_ALERT", "FAN18_OL_TACH_ALERT",
+				"FAN17_IL_TACH_ALERT", "FAN17_OL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_5_P1V0_POWER_FAIL", "FCB_5_P1V8_POWER_FAIL",
+				"FCB_5_P48V_ZONE0_POWER_FAIL", "FAN20_POWER_FAIL",
+				"FAN19_POWER_FAIL", "FAN18_POWER_FAIL",
+				"FAN17_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 6
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN24_PWRGD_R", "P48V_FAN23_PWRGD_R",
+				"P48V_FAN22_PWRGD_R", "P48V_FAN21_PWRGD_R",
+				"FCB_6_P48V_ZONE0_PWRGD_R", "FCB_6_P48V_ZONE1_PWRGD_R",
+				"FCB_6_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN24_ALERT_N", "INA238_FAN23_ALERT_N",
+				"INA238_FAN22_ALERT_N", "INA238_FAN21_ALERT_N",
+				"FCB_6_TMP75_ALERT_N", "",
+				"", "",
+				"FAN24_PRSNT", "FAN23_PRSNT",
+				"FAN22_PRSNT", "FAN21_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN24_IL_TACH_ALERT", "FAN24_OL_TACH_ALERT",
+				"FAN23_IL_TACH_ALERT", "FAN23_OL_TACH_ALERT",
+				"FAN22_IL_TACH_ALERT", "FAN22_OL_TACH_ALERT",
+				"FAN21_IL_TACH_ALERT", "FAN21_OL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_6_P1V0_POWER_FAIL", "FCB_6_P1V8_POWER_FAIL",
+				"FCB_6_P48V_ZONE0_POWER_FAIL", "FAN24_POWER_FAIL",
+				"FAN23_POWER_FAIL", "FAN22_POWER_FAIL",
+				"FAN21_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux36: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux37: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux38: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux39: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux44: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux45: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux46: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux47: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","BLADE_UART_SEL2","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","BLADE_UART_SEL0","","","",
+	/*M0-M7*/	"","","","","","BLADE_UART_SEL1","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","power-chassis-control","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","host0-ready",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","BAT_DETECT","","power-chassis-good","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","BLADE_UART_SEL3","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&sgpiom0 {
+	gpio-line-names =
+	/*"input pin","output pin"*/
+	/*A0 - A7*/
+	"PRSNT_MTIA_BLADE1_N","PWREN_MTIA_BLADE1_EN_N",
+	"PRSNT_MTIA_BLADE2_N","PWREN_MTIA_BLADE2_EN_N",
+	"PRSNT_MTIA_BLADE3_N","PWREN_MTIA_BLADE3_EN_N",
+	"PRSNT_MTIA_BLADE4_N","PWREN_MTIA_BLADE4_EN_N",
+	"PRSNT_MTIA_BLADE5_N","PWREN_MTIA_BLADE5_EN_N",
+	"PRSNT_MTIA_BLADE6_N","PWREN_MTIA_BLADE6_EN_N",
+	"PRSNT_MTIA_BLADE7_N","PWREN_MTIA_BLADE7_EN_N",
+	"PRSNT_MTIA_BLADE8_N","PWREN_MTIA_BLADE8_EN_N",
+	/*B0 - B7*/
+	"PRSNT_MTIA_BLADE9_N","PWREN_MTIA_BLADE9_EN_N",
+	"PRSNT_MTIA_BLADE10_N","PWREN_MTIA_BLADE10_EN_N",
+	"PRSNT_MTIA_BLADE11_N","PWREN_MTIA_BLADE11_EN_N",
+	"PRSNT_MTIA_BLADE12_N","PWREN_MTIA_BLADE12_EN_N",
+	"PRSNT_MTIA_BLADE13_N","PWREN_MTIA_BLADE13_EN_N",
+	"PRSNT_MTIA_BLADE14_N","PWREN_MTIA_BLADE14_EN_N",
+	"PRSNT_MTIA_BLADE15_N","PWREN_MTIA_BLADE15_EN_N",
+	"PRSNT_MTIA_BLADE16_N","PWREN_MTIA_BLADE16_EN_N",
+	/*C0 - C7*/
+	"PRSNT_NW_BLADE1_N","PWREN_NW_BLADE1_EN_N",
+	"PRSNT_NW_BLADE2_N","PWREN_NW_BLADE2_EN_N",
+	"PRSNT_NW_BLADE3_N","PWREN_NW_BLADE3_EN_N",
+	"PRSNT_NW_BLADE4_N","PWREN_NW_BLADE4_EN_N",
+	"PRSNT_NW_BLADE5_N","PWREN_NW_BLADE5_EN_N",
+	"PRSNT_NW_BLADE6_N","PWREN_NW_BLADE6_EN_N",
+	"PRSNT_FCB_1_N","PWREN_MTIA_BLADE1_HSC_EN_N",
+	"PRSNT_FCB_2_N","PWREN_MTIA_BLADE2_HSC_EN_N",
+	/*D0 - D7*/
+	"PRSNT_FCB_3_N","PWREN_MTIA_BLADE3_HSC_EN_N",
+	"PRSNT_FCB_4_N","PWREN_MTIA_BLADE4_HSC_EN_N",
+	"PRSNT_FCB_6_N","PWREN_MTIA_BLADE5_HSC_EN_N",
+	"PRSNT_FCB_5_N","PWREN_MTIA_BLADE6_HSC_EN_N",
+	"PWRGD_MTIA_BLADE1_PWROK_N","PWREN_MTIA_BLADE7_HSC_EN_N",
+	"PWRGD_MTIA_BLADE2_PWROK_N","PWREN_MTIA_BLADE8_HSC_EN_N",
+	"PWRGD_MTIA_BLADE3_PWROK_N","PWREN_MTIA_BLADE9_HSC_EN_N",
+	"PWRGD_MTIA_BLADE4_PWROK_N","PWREN_MTIA_BLADE10_HSC_EN_N",
+	/*E0 - E7*/
+	"PWRGD_MTIA_BLADE5_PWROK_N","PWREN_MTIA_BLADE11_HSC_EN_N",
+	"PWRGD_MTIA_BLADE6_PWROK_N","PWREN_MTIA_BLADE12_HSC_EN_N",
+	"PWRGD_MTIA_BLADE7_PWROK_N","PWREN_MTIA_BLADE13_HSC_EN_N",
+	"PWRGD_MTIA_BLADE8_PWROK_N","PWREN_MTIA_BLADE14_HSC_EN_N",
+	"PWRGD_MTIA_BLADE9_PWROK_N","PWREN_MTIA_BLADE15_HSC_EN_N",
+	"PWRGD_MTIA_BLADE10_PWROK_N","PWREN_MTIA_BLADE16_HSC_EN_N",
+	"PWRGD_MTIA_BLADE11_PWROK_N","PWREN_NW_BLADE1_HSC_EN_N",
+	"PWRGD_MTIA_BLADE12_PWROK_N","PWREN_NW_BLADE2_HSC_EN_N",
+	/*F0 - F7*/
+	"PWRGD_MTIA_BLADE13_PWROK_N","PWREN_NW_BLADE3_HSC_EN_N",
+	"PWRGD_MTIA_BLADE14_PWROK_N","PWREN_NW_BLADE4_HSC_EN_N",
+	"PWRGD_MTIA_BLADE15_PWROK_N","PWREN_NW_BLADE5_HSC_EN_N",
+	"PWRGD_MTIA_BLADE16_PWROK_N","PWREN_NW_BLADE6_HSC_EN_N",
+	"PWRGD_NW_BLADE1_PWROK_N","PWREN_SGPIO_FCB_2_EN_N",
+	"PWRGD_NW_BLADE2_PWROK_N","PWREN_SGPIO_FCB_1_EN_N",
+	"PWRGD_NW_BLADE3_PWROK_N","PWREN_SGPIO_FCB_4_EN_N",
+	"PWRGD_NW_BLADE4_PWROK_N","PWREN_SGPIO_FCB_3_EN_N",
+	/*G0 - G7*/
+	"PWRGD_NW_BLADE5_PWROK_N","PWREN_SGPIO_FCB_5_EN_N",
+	"PWRGD_NW_BLADE6_PWROK_N","PWREN_SGPIO_FCB_6_EN_N",
+	"PWRGD_FCB_1","FM_BMC_RST_RTCRST_R",
+	"PWRGD_FCB_2","",
+	"PWRGD_FCB_3","FM_MDIO_SW_SEL",
+	"PWRGD_FCB_4","FM_P24V_SMPWR_EN",
+	"PWRGD_FCB_6","",
+	"PWRGD_FCB_5","",
+	/*H0 - H7*/
+	"LEAK_DETECT_MTIA_BLADE1_N","",
+	"LEAK_DETECT_MTIA_BLADE2_N","",
+	"LEAK_DETECT_MTIA_BLADE3_N","",
+	"LEAK_DETECT_MTIA_BLADE4_N","",
+	"LEAK_DETECT_MTIA_BLADE5_N","",
+	"LEAK_DETECT_MTIA_BLADE6_N","",
+	"LEAK_DETECT_MTIA_BLADE7_N","ERR_INJECT_CMM_PWR_FAIL_N",
+	"LEAK_DETECT_MTIA_BLADE8_N","",
+	/*I0 - I7*/
+	"LEAK_DETECT_MTIA_BLADE9_N","RST_I2CRST_FCB_5_N",
+	"LEAK_DETECT_MTIA_BLADE10_N","RST_I2CRST_FCB_6_N",
+	"LEAK_DETECT_MTIA_BLADE11_N","RST_I2CRST_FCB_4_N",
+	"LEAK_DETECT_MTIA_BLADE12_N","RST_I2CRST_FCB_3_N",
+	"LEAK_DETECT_MTIA_BLADE13_N","RST_I2CRST_FCB_2_N",
+	"LEAK_DETECT_MTIA_BLADE14_N","RST_I2CRST_FCB_1_N",
+	"LEAK_DETECT_MTIA_BLADE15_N","BMC_READY",
+	"LEAK_DETECT_MTIA_BLADE16_N","FM_88E6393X_BIN_UPDATE_EN_N",
+	/*J0 - J7*/
+	"LEAK_DETECT_NW_BLADE1_N","WATER_VALVE_CLOSED_N",
+	"LEAK_DETECT_NW_BLADE2_N","",
+	"LEAK_DETECT_NW_BLADE3_N","",
+	"LEAK_DETECT_NW_BLADE4_N","",
+	"LEAK_DETECT_NW_BLADE5_N","",
+	"LEAK_DETECT_NW_BLADE6_N","",
+	"PWRGD_MTIA_BLADE1_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE2_HSC_PWROK_N","",
+	/*K0 - K7*/
+	"PWRGD_MTIA_BLADE3_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE4_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE5_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE6_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE7_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE8_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE9_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE10_HSC_PWROK_N","",
+	/*L0 - L7*/
+	"PWRGD_MTIA_BLADE11_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE12_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE13_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE14_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE15_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE16_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE1_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE2_HSC_PWROK_N","",
+	/*M0 - M7*/
+	"PWRGD_NW_BLADE3_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE4_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE5_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE6_HSC_PWROK_N","",
+	"RPU_READY","",
+	"IT_GEAR_RPU_LINK_N","",
+	"IT_GEAR_LEAK","",
+	"WATER_VALVE_CLOSED_N","",
+	/*N0 - N7*/
+	"VALVE_STATUS_0","",
+	"VALVE_STATUS_1","",
+	"PCA9555_IRQ1_N","",
+	"PCA9555_IRQ2_N","",
+	"CR_TOGGLE_BOOT_N","",
+	"IRQ_FCB_1_N","",
+	"IRQ_FCB_2_N","",
+	"CMM_CABLE_CARTRIDGE_PRSNT_BOT_N","",
+	/*O0 - O7*/
+	"CMM_CABLE_CARTRIDGE_PRSNT_TOP_N","",
+	"BOT_BCB_CABLE_PRSNT_N","",
+	"TOP_BCB_CABLE_PRSNT_N","",
+	"IRQ_FCB_3_N","",
+	"IRQ_FCB_4_N","",
+	"CHASSIS_LEAK0_DETECT_N","",
+	"CHASSIS_LEAK1_DETECT_N","",
+	"PCA9555_IRQ3_N","",
+	/*P0 - P7*/
+	"PCA9555_IRQ4_N","",
+	"PCA9555_IRQ5_N","",
+	"CMM_AC_PWR_BTN_N","",
+	"RPU_READY_SPARE","",
+	"IT_GEAR_LEAK_SPARE","",
+	"IT_GEAR_RPU_LINK_SPARE_N","",
+	"IRQ_FCB_6_N","",
+	"IRQ_FCB_5_N","";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts
index 230d16cd9967..aafd1042b6e5 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts
@@ -344,7 +344,7 @@
 	 * I2C Switch 2-0070 is connecting to SCM (System Controller
 	 * Module).
 	 */
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -425,7 +425,7 @@
 &i2c8 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -441,7 +441,7 @@
 			#size-cells = <0>;
 			reg = <0>;
 
-			i2c-switch@71 {
+			i2c-mux@71 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -507,7 +507,7 @@
 			#size-cells = <0>;
 			reg = <1>;
 
-			i2c-switch@72 {
+			i2c-mux@72 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -573,7 +573,7 @@
 			#size-cells = <0>;
 			reg = <2>;
 
-			i2c-switch@76 {
+			i2c-mux@76 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -639,7 +639,7 @@
 			#size-cells = <0>;
 			reg = <3>;
 
-			i2c-switch@76 {
+			i2c-mux@76 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -729,7 +729,7 @@
 	 * I2C Switch 9-0070 is connecting to MAC/PHY EEPROMs on SMB
 	 * (Switch Main Board).
 	 */
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -793,7 +793,7 @@
 &i2c11 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -809,7 +809,7 @@
 			#size-cells = <0>;
 			reg = <0>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -875,7 +875,7 @@
 			#size-cells = <0>;
 			reg = <1>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -941,7 +941,7 @@
 			#size-cells = <0>;
 			reg = <2>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1007,7 +1007,7 @@
 			#size-cells = <0>;
 			reg = <3>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1073,7 +1073,7 @@
 			#size-cells = <0>;
 			reg = <4>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1139,7 +1139,7 @@
 			#size-cells = <0>;
 			reg = <5>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1205,7 +1205,7 @@
 			#size-cells = <0>;
 			reg = <6>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1271,7 +1271,7 @@
 			#size-cells = <0>;
 			reg = <7>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
new file mode 100644
index 000000000000..72c84f31bdf6
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
@@ -0,0 +1,982 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2025 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Santabarbara BMC";
+	compatible = "facebook,santabarbara-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		i2c16 = &i2c4mux0ch0;
+		i2c17 = &i2c4mux0ch1;
+		i2c18 = &i2c4mux0ch2;
+		i2c19 = &i2c4mux0ch3;
+		i2c20 = &i2c4mux0ch4;
+		i2c21 = &i2c4mux0ch5;
+		i2c22 = &i2c4mux0ch6;
+		i2c23 = &i2c4mux0ch7;
+		i2c24 = &i2c5mux0ch0;
+		i2c25 = &i2c5mux0ch1;
+		i2c26 = &i2c5mux0ch2;
+		i2c27 = &i2c5mux0ch3;
+		i2c28 = &i2c5mux1ch0;
+		i2c29 = &i2c5mux1ch1;
+		i2c30 = &i2c5mux1ch2;
+		i2c31 = &i2c5mux1ch3;
+		i2c32 = &i2c12mux0ch0;
+		i2c33 = &i2c12mux0ch1;
+		i2c34 = &i2c12mux0ch2;
+		i2c35 = &i2c12mux0ch3;
+		i2c36 = &i2c12mux0ch4;
+		i2c37 = &i2c12mux0ch5;
+		i2c38 = &i2c12mux0ch6;
+		i2c39 = &i2c12mux0ch7;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	p3v3_bmc_aux: regulator-p3v3-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_bmc_aux";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	spi_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		status = "okay";
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+	status = "okay";
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"rtc-battery-voltage-read-enable","","","BMC_READY",
+			"","led-identify","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"FM_MUX1_SEL_R","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"led-postcode-0","led-postcode-1",
+			"led-postcode-2","led-postcode-3",
+			"led-postcode-4","led-postcode-5",
+			"led-postcode-6","led-postcode-7",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"power-button","","reset-button","",
+			"led-power","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","power-host-control","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","",
+				"FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1",
+				"FM_BOARD_BMC_REV_ID2","",
+	/*18C0-18C7*/	"SPI_BMC_BIOS_ROM_IRQ0_R_N","","","","","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"FM_BMC_PROT_LS_EN","AC_PWR_BMC_BTN_R_N","","";
+};
+
+&i2c0 {
+	status = "okay";
+
+	// MB FRU
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <112 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FM_NIC_PPS_IN_OE_N","FM_NIC_PPS_OUT_OE_N",
+			"FM_CPU0_TRIGGERTSC_OE_N","FM_NIC_PPS_IN_MUX_OE_N",
+			"FM_CPU0_CORETYPE0","FM_CPU0_CORETYPE1",
+			"FM_CPU0_CORETYPE2","FM_NIC_PPS_OUT_MUX_OE",
+			"CLKMUX_INPUT_LOSS_U45_R_N","FM_CPU0_SP7R1",
+			"FM_CPU0_SP7R2","FM_CPU0_SP7R3",
+			"FM_CPU0_SP7R4","",
+			"FM_NIC_PPS_IN_S0_R","FM_NIC_PPS_IN_S1_R";
+	};
+
+	fan-controller@21 {
+		compatible = "maxim,max31790";
+		reg = <0x21>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <116 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FM_CBL_PRSNT_0A_N","FM_CBL_PRSNT_0B_N",
+			"FM_CBL_PRSNT_1A_N","FM_CBL_PRSNT_1B_N",
+			"FM_MODULE_PWRGD_0A","FM_MODULE_PWRGD_0B",
+			"CLKMUX_INPUT_LOSS_U88_R_N","FM_MODULE_PWRGD_1B",
+			"","",
+			"CLKMUX_INPUT_LOSS_U83_R_N","CLKMUX_INPUT_LOSS_U84_R_N",
+			"FM_P3V3_E1S_0_FAULT_R_N","FM_P3V3_E1S_1_FAULT_R_N",
+			"E1S_0_P12V_ADC_R_ALERT","E1S_1_P12V_ADC_R_ALERT";
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <114 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FM_CBL_PRSNT_2A_N","FM_CBL_PRSNT_2B_N",
+			"FM_CBL_PRSNT_3A_N","FM_CBL_PRSNT_3B_N",
+			"FM_CBL_PRSNT_4A_N","FM_CBL_PRSNT_4B_N",
+			"FM_P3V3_NIC_400G_FAULT_R_N","FM_MODULE_PWRGD_2B",
+			"OCP_SFF_P12V_ADC_R_ALERT","FM_MODULE_PWRGD_3B",
+			"FM_THERMAL_ALERT_R_N","FM_MODULE_PWRGD_4B",
+			"FM_CBL_PRSNT_OSFP_A_N","FM_CBL_PRSNT_OSFP_B_N",
+			"FM_JTAG_MCIO_MUX_S0","FM_JTAG_MCIO_MUX_S1";
+	};
+
+	gpio@26 {
+		compatible = "nxp,pca9555";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <118 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FAN_0_PRSNT_R1_N","FAN_1_PRSNT_R1_N",
+			"FAN_2_PRSNT_R1_N","FAN_3_PRSNT_R1_N",
+			"P12V_FAN_0_ADC_ALERT","P12V_FAN_1_ADC_ALERT",
+			"P12V_FAN_2_ADC_ALERT","P12V_FAN_3_ADC_ALERT",
+			"P12V_FAN0_PWRGD_R","P12V_FAN1_PWRGD_R",
+			"P12V_FAN2_PWRGD_R","P12V_FAN3_PWRGD_R",
+			"","","","";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			// HPM Board ID EEPROM
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			// SCM Board ID EEPROM
+			eeprom@53 {
+				compatible = "atmel,24c128";
+				reg = <0x53>;
+			};
+		};
+		i2c4mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c4mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c4mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@42 {
+				compatible = "ti,ina230";
+				reg = <0x42>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@46 {
+				compatible = "ti,ina230";
+				reg = <0x46>;
+				shunt-resistor = <2000>;
+			};
+
+			voltage-sensor@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+				vref-supply = <&p3v3_bmc_aux>;
+			};
+
+			voltage-sensor@4a {
+				compatible = "ti,ads7830";
+				reg = <0x4a>;
+				vref-supply = <&p3v3_bmc_aux>;
+			};
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+
+			temperature-sensor@4e {
+				compatible = "ti,tmp75";
+				reg = <0x4e>;
+			};
+		};
+		i2c4mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c4mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c4mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@42 {
+				compatible = "ti,ina230";
+				reg = <0x42>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@46 {
+				compatible = "ti,ina230";
+				reg = <0x46>;
+				shunt-resistor = <2000>;
+			};
+
+			voltage-sensor@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+			};
+		};
+		i2c4mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+
+			// FIO FRU
+			eeprom@53 {
+				compatible = "atmel,24c512";
+				reg = <0x53>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	// E1S BP FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c5mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c5mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c5mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux1ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+			};
+		};
+		i2c5mux1ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+		};
+		i2c5mux1ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina230";
+				reg = <0x41>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+				shunt-resistor = <2000>;
+			};
+		};
+		i2c5mux1ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@74 {
+				compatible = "nxp,pca9539";
+				reg = <0x74>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"P12V_E1S_ADC_ALERT","BUFF0_100M_LOSB_PLD",
+					"E1S_BP_SKU_ID0","E1S_BP_SKU_ID1",
+					"E1S_BP_SKU_ID2","E1S_BP_REV_ID0",
+					"E1S_BP_REV_ID1","E1S_BP_REV_ID2",
+					"P3V3_E1S_1_FAULT_R_N","P3V3_E1S_2_FAULT_R_N",
+					"P3V3_E1S_3_FAULT_R_N","P3V3_E1S_4_FAULT_R_N",
+					"P12V_E1S_1_FAULT_R_N","P12V_E1S_2_FAULT_R_N",
+					"P12V_E1S_3_FAULT_R_N","P12V_E1S_4_FAULT_R_N";
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	// Rainbow0 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	// Rainbow2 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	// SCM FRU
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	// BSM FRU
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	// Rainbow3 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	// OCP NIC TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	// SWB FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c12mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+		};
+		i2c12mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@42 {
+				compatible = "mps,mp2971";
+				reg = <0x42>;
+			};
+
+			power-monitor@43 {
+				compatible = "mps,mp2971";
+				reg = <0x43>;
+			};
+		};
+		i2c12mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina230";
+				reg = <0x41>;
+				shunt-resistor = <2000>;
+			};
+		};
+		i2c12mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+				shunt-resistor = <2000>;
+			};
+		};
+		i2c12mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@49 {
+				compatible = "ti,ads7830";
+				reg = <0x49>;
+			};
+		};
+		i2c12mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c12mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c12mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	// Rainbow1 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&mac2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&mac3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&sgpiom0 {
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out - in - out */
+	/*A0-A3 line 0-7*/
+	"PDB1_HSC_PWR_OK","power-chassis-control",
+	"PDB2_HSC_PWR_OK","FM_MODULE_PWRGD_0A_OUT",
+	"PWRGD_P12V_MEM","FM_MODULE_PWRGD_0B_OUT",
+	"PWRGD_P12V_SCM","FM_MODULE_PWRGD_1B_OUT",
+	/*A4-A7 line 8-15*/
+	"PWRGD_P12V_FAN","FM_MODULE_PWRGD_2B_OUT",
+	"PWRGD_P5V_AUX","FM_MODULE_PWRGD_3B_OUT",
+	"power-chassis-good","FM_MODULE_PWRGD_4B_OUT",
+	"PWRGD_P1V8_LDO","FM_CBL_PRSNT_0A_N_OUT",
+	/*B0-B3 line 16-23*/
+	"PWRGD_P1V_LDO","FM_CBL_PRSNT_0B_N_OUT",
+	"PWRGD_PVDD33_S5","FM_CBL_PRSNT_1A_N_OUT",
+	"PWRGD_PVDD18_S5_P0","FM_CBL_PRSNT_1B_N_OUT",
+	"CPU0_SLP_S5_N","FM_CBL_PRSNT_2A_N_OUT",
+	/*B4-B7 line 24-31*/
+	"PWRGD_PVDDIO_MEM_S3_P0","FM_CBL_PRSNT_2B_N_OUT",
+	"CPU0_SLP_S3_N","FM_CBL_PRSNT_3A_N_OUT",
+	"FM_MODULE_PWRGD_1B","FM_CBL_PRSNT_3B_N_OUT",
+	"FM_MODULE_PWRGD_2B","FM_CBL_PRSNT_4A_N_OUT",
+	/*C0-C3 line 32-39*/
+	"FM_MODULE_PWRGD_3B","FM_CBL_PRSNT_4B_N_OUT",
+	"FM_MODULE_PWRGD_4B","P12V_FAN0_PWRGD_OUT",
+	"FM_MODULE_PWRGD_0B","P12V_FAN1_PWRGD_OUT",
+	"PWRGD_PVDDIO_P0","P12V_FAN2_PWRGD_OUT",
+	/*C4-C7 line 40-47*/
+	"PWRGD_PVDDCR_SOC_P0","P12V_FAN3_PWRGD_OUT",
+	"PWRGD_PVDDCR_CPU0_P0","P12V_FAN4_PWRGD_OUT",
+	"PWRGD_PVDDCR_CPU1_P0","P12V_FAN5_PWRGD_OUT",
+	"FM_CPU0_PWR_GOOD","P12V_FAN6_PWRGD_OUT",
+	/*D0-D3 line 48-55*/
+	"host0-ready","P12V_FAN7_PWRGD_OUT",
+	"FM_PWRGD_CPU0_PWROK","FAN_0_PRSNT_R1_N_OUT",
+	"FM_RST_CPU0_RESETL_N","FAN_1_PRSNT_R1_N_OUT",
+	"RST_CPU0_PERST0_R_N","FAN_2_PRSNT_R1_N_OUT",
+	/*D4-D7 line 56-63*/
+	"RST_CPU0_PERST1_R_N","FAN_3_PRSNT_R1_N_OUT",
+	"BIOS_POST_CMPLT","FAN_4_PRSNT_R1_N_OUT",
+	"","FAN_5_PRSNT_R1_N_OUT",
+	"","FAN_6_PRSNT_R1_N_OUT",
+	/*E0-E3 line 64-71*/
+	"FM_PWRGD_CHAD_CPU0","FAN_7_PRSNT_R1_N_OUT",
+	"FM_PWRGD_CHEH_CPU0","TRAY_SLOT_ID0_OUT",
+	"FM_PWRGD_CHIL_CPU0","TRAY_SLOT_ID1_OUT",
+	"FM_PWRGD_CHMP_CPU0","TRAY_SLOT_ID2_OUT",
+	/*E4-E7 line 72-79*/
+	"P12V_E1S_0_PWRGD","TRAY_SLOT_ID3_OUT",
+	"P12V_E1S_1_PWRGD","TRAY_SLOT_ID4_OUT",
+	"P3V3_E1S_0_PWRGD","SCM_JTAG_MUX_S0_R",
+	"P3V3_E1S_1_PWRGD","SCM_JTAG_MUX_S1_R",
+	/*F0-F3 line 80-87*/
+	"FM_MODULE_PWRGD_0A","BMC_SGPIO_READY",
+	"OCP_V3_1_P3V3_PLD_R_PWRGD","CPU0_SYS_RESET_N",
+	"P12V_OCP_V3_1_PLD_PWRGD","RST_CPU0_KBRST_N",
+	"PWRGD_OCP_SFF_PWR_GOOD","BIOS_DEBUG_MODE",
+	/*F4-F7 line 88-95*/
+	"","CLR_CMOS",
+	"","I3C_SPD_MUX_FORCE_SEL",
+	"","FM_JTAG_HOST_SEL",
+	"","TRAY_PRESENT_N",
+	/*G0-G3 line 96-103*/
+	"MB_REV_ID_0","UART_BMC_SEL0",
+	"MB_REV_ID_1","UART_BMC_SEL1",
+	"MB_REV_ID_2","SCM_USB_SEL",
+	"MB_SKU_ID_0","FORCE_ALL_PWRON",
+	/*G4-G7 line 104-111*/
+	"MB_SKU_ID_1","PASSWORD_CLEAR",
+	"MB_SKU_ID_2","",
+	"MB_SKU_ID_3","",
+	"","BIOS_DEBUG_MODE",
+	/*H0-H3 line 112-119*/
+	"FM_IOEXP_U538_INT_N","",
+	"FM_IOEXP_U539_INT_N","",
+	"FM_IOEXP_U540_INT_N","",
+	"FM_IOEXP_U541_INT_N","",
+	/*H4-H7 line 120-127*/
+	"FM_IOEXP_PDB2_U1003_INT_N","",
+	"","","","","","",
+	/*I0-I3 line 128-135*/
+	"","","","",
+	"PDB_IRQ_PMBUS_ALERT_ISO_R_N","",
+	"PDB_UV_ALERT_ISO_R_N","",
+	/*I4-I7 line 136-143*/
+	"P12V_SCM_ADC_ALERT","",
+	"CPU0_REGS_I2C_ALERT_N","",
+	"FM_RTC_ALERT_N","",
+	"APML_CPU0_ALERT_R_N","",
+	/*J0-J3 line 144-151*/
+	"SMB_RJ45_FIO_TMP_ALERT","",
+	"FM_SMB_ALERT_MCIO_0A_N","",
+	"I3C_MCIO_0B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_1A_N","",
+	/*J4-J7 line 152-159*/
+	"I3C_MCIO_1B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_2A_N","",
+	"I3C_MCIO_2B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_3A_N","",
+	/*K0-K3 line 160-167*/
+	"I3C_MCIO_3B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_4A_N","",
+	"I3C_MCIO_4B_ALERT_ISO_R_N","",
+	"","",
+	/*K4-K7 line 168-175*/
+	"","","","","","","","",
+	/*L0-L3 line 176-183*/
+	"FM_CPU0_THERMTRIP_N","",
+	"FM_CPU0_PROCHOT_N","",
+	"FM_CPU0_SMERR_N","",
+	"FM_PVDDCR_CPU0_P0_OCP_N","",
+	/*L4-L7 line 184-191*/
+	"FM_PVDDCR_CPU1_P0_OCP_N","",
+	"FM_PVDDCR_SOC_P0_OCP_N","",
+	"FM_OCP_PWRBRK_R_N","",
+	"PMIC_ERROR_N","",
+	/*M0-M3 line 192-199*/
+	"","","","","","","","",
+	/*M4-M7 line 200-207*/
+	"","","","","","","","",
+	/*N0-N3 line 208-215*/
+	"FM_PRSNT_CPU0_N","",
+	"OCP_SFF_PRSNT_N","",
+	"E1S_0_PRSNT_R_N","",
+	"E1S_BP_0_PRSNT_R_N","",
+	/*N4-N7 line 216-223*/
+	"E1S_BP_1_PRSNT_R_N","",
+	"E1S_BP_2_PRSNT_R_N","",
+	"E1S_BP_3_PRSNT_R_N","",
+	"PDB_PRSNT_J311_N","",
+	/*O0-O3 line 224-231*/
+	"PDB_PRSNT_J312_N","",
+	"PDB_PRSNT_J313_N","",
+	"PDB_PRSNT_J314_N","",
+	"PRSNT_RJ45_FIO_N_R","",
+	/*O4-O7 line 232-239*/
+	"PRSNT_LEAK_CABLE_1_R_N","",
+	"PRSNT_LEAK_CABLE_2_R_N","",
+	"PRSNT_HDT_N","",
+	"","",
+	/*P0-P3 line 240-247*/
+	"","","","","","","","",
+	/*P4-P7 line 248-255*/
+	"","","","","","","","";
+	status = "okay";
+};
+
+// BIOS Flash
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+	status = "okay";
+
+	flash@0 {
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		status = "okay";
+	};
+};
+
+// HOST BIOS Debug
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+// BMC Debug Console
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
index b6b16356f571..5d4c7d979f1e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
@@ -211,7 +211,7 @@
 &i2c1 {
 	status = "okay";
 	//X24 Riser
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9544";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -243,7 +243,7 @@
 				pagesize = <32>;
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9546";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -303,7 +303,7 @@
 				pagesize = <32>;
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9546";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -363,7 +363,7 @@
 				pagesize = <32>;
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9546";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -508,7 +508,7 @@
 	status = "okay";
 	//HSC, AirMax Conn A
 	adm1278@45 {
-		compatible = "adm1275";
+		compatible = "adi,adm1275";
 		reg = <0x45>;
 		shunt-resistor-micro-ohms = <250>;
 	};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts
index 584efa528450..97cd11c3d9a5 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts
@@ -44,7 +44,7 @@
 };
 
 &i2c7 {
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge40.dts
index 6624855d8ebd..6624855d8ebd 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge40.dts
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
new file mode 100644
index 000000000000..1d46eaee8656
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 400 BMC (64MB Datastore)";
+	compatible = "facebook,wedge400-data64-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0076) provides 8 channels connecting to
+		 * FCM (Fan Controller Module).
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		spi2 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			      <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>;
+	};
+
+	/*
+	 * GPIO-based SPI Master is required to access SPI TPM, because
+	 * full-duplex SPI transactions are not supported by ASPEED SPI
+	 * Controllers.
+	 */
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+		sck-gpios = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+/*
+ * Both firmware flashes are 128MB on Wedge400 BMC.
+ */
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout-128-data64.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x8000000>;
+			label = "flash1";
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
+ * communication.
+ */
+&i2c0 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&sdhci1 {
+	max-frequency = <25000000>;
+	/*
+	 * DMA mode needs to be disabled to avoid conflicts with UHCI
+	 * Controller in AST2500 SoC.
+	 */
+	sdhci-caps-mask = <0x0 0x580000>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
new file mode 100644
index 000000000000..ef0cfc51cda4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+
+#include "aspeed-bmc-facebook-wedge400-data64.dts"
+
+/ {
+	model = "Facebook Wedge 400 BMC";
+	compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
+};
+
+&fmc_flash0 {
+	/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128.dtsi"
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts
index 5e6105874217..98fe0d6c8188 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts
@@ -57,7 +57,7 @@
 &i2c2 {
 	status = "okay";
 
-	i2c-switch@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
new file mode 100644
index 000000000000..60b98d602e80
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -0,0 +1,1384 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Yosemite 4 BMC";
+	compatible = "facebook,yosemite4-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		serial8 = &uart9;
+
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 1>, <&adc1 7>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			reg = <0>;
+			spi-max-frequency = <33000000>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart6 {
+	status = "okay";
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&wdt2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst2_default>;
+	aspeed,reset-type = "system";
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+	mellanox,multi-host;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+	mellanox,multi-host;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT1_UART_SEL0","SLOT1_UART_SEL1",
+				"SLOT1_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT2_UART_SEL0","SLOT2_UART_SEL1",
+				"SLOT2_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT3_UART_SEL0","SLOT3_UART_SEL1",
+				"SLOT3_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT4_UART_SEL0","SLOT4_UART_SEL1",
+				"SLOT4_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT5_UART_SEL0","SLOT5_UART_SEL1",
+				"SLOT5_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT6_UART_SEL0","SLOT6_UART_SEL1",
+				"SLOT6_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT7_UART_SEL0","SLOT7_UART_SEL1",
+				"SLOT7_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT8_UART_SEL0","SLOT8_UART_SEL1",
+				"SLOT8_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c8 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux17: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux18: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux19: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@71 {
+		compatible = "nxp,pca9544";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux20: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux21: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux22: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux23: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+	};
+};
+
+&i2c10 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@74 {
+		compatible = "nxp,pca9544";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux28: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9506";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@21 {
+				compatible = "nxp,pca9506";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@22 {
+				compatible = "nxp,pca9506";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@23 {
+				compatible = "nxp,pca9506";
+				reg = <0x23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@24 {
+				compatible = "nxp,pca9506";
+				reg = <0x24>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names = "","","","",
+						  "NIC0_MAIN_PWR_EN",
+						  "NIC1_MAIN_PWR_EN",
+						  "NIC2_MAIN_PWR_EN",
+						  "NIC3_MAIN_PWR_EN",
+						  "","","","","","","","",
+						  "","","","","","","","",
+						  "","","","","","","","";
+			};
+		};
+
+		imux29: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+	power-sensor@10 {
+		compatible = "adi,adm1272";
+		reg = <0x10>;
+	};
+
+	power-sensor@12 {
+		compatible = "adi,adm1272";
+		reg = <0x12>;
+	};
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "P48V_OCP_GPIO1", "P48V_OCP_GPIO2",
+				  "P48V_OCP_GPIO3", "FAN_BOARD_0_REVISION_0_R",
+				  "FAN_BOARD_0_REVISION_1_R",
+				  "FAN_BOARD_1_REVISION_0_R",
+				  "FAN_BOARD_1_REVISION_1_R", "RST_MUX_R_N",
+				  "RST_LED_CONTROL_FAN_BOARD_0_N",
+				  "RST_LED_CONTROL_FAN_BOARD_1_N",
+				  "RST_IOEXP_FAN_BOARD_0_N",
+				  "RST_IOEXP_FAN_BOARD_1_N",
+				  "PWRGD_LOAD_SWITCH_FAN_BOARD_0_R",
+				  "PWRGD_LOAD_SWITCH_FAN_BOARD_1_R",
+				  "", "";
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "HSC_OCP_SLOT_ODD_GPIO1",
+				  "HSC_OCP_SLOT_ODD_GPIO2",
+				  "HSC_OCP_SLOT_ODD_GPIO3",
+				  "HSC_OCP_SLOT_EVEN_GPIO1",
+				  "HSC_OCP_SLOT_EVEN_GPIO2",
+				  "HSC_OCP_SLOT_EVEN_GPIO3",
+				  "ADC_TYPE_0_R", "ADC_TYPE_1_R",
+				  "MEDUSA_BOARD_REV_0", "MEDUSA_BOARD_REV_1",
+				  "MEDUSA_BOARD_REV_2", "MEDUSA_BOARD_TYPE",
+				  "DELTA_MODULE_TYPE", "P12V_HSC_TYPE",
+				  "", "";
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "CARD_TYPE_SLOT1", "CARD_TYPE_SLOT2",
+				  "CARD_TYPE_SLOT3", "CARD_TYPE_SLOT4",
+				  "CARD_TYPE_SLOT5", "CARD_TYPE_SLOT6",
+				  "CARD_TYPE_SLOT7", "CARD_TYPE_SLOT8",
+				  "OC_P48V_HSC_0_N", "FLT_P48V_HSC_0_N",
+				  "OC_P48V_HSC_1_N", "FLT_P48V_HSC_1_N",
+				  "EN_P48V_AUX_0", "EN_P48V_AUX_1",
+				  "PWRGD_P12V_AUX_0", "PWRGD_P12V_AUX_1";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "HSC1_ALERT1_R_N", "HSC2_ALERT1_R_N",
+				  "HSC3_ALERT1_R_N", "HSC4_ALERT1_R_N",
+				  "HSC5_ALERT1_R_N", "HSC6_ALERT1_R_N",
+				  "HSC7_ALERT1_R_N", "HSC8_ALERT1_R_N",
+				  "HSC1_ALERT2_R_N", "HSC2_ALERT2_R_N",
+				  "HSC3_ALERT2_R_N", "HSC4_ALERT2_R_N",
+				  "HSC5_ALERT2_R_N", "HSC6_ALERT2_R_N",
+				  "HSC7_ALERT2_R_N", "HSC8_ALERT2_R_N";
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c12 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux34: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			rtc@6f {
+				compatible = "nuvoton,nct3018y";
+				reg = <0x6f>;
+			};
+
+			gpio@20 {
+				compatible = "nxp,pca9506";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@21 {
+				compatible = "nxp,pca9506";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@22 {
+				compatible = "nxp,pca9506";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@23 {
+				compatible = "nxp,pca9506";
+				reg = <0x23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		imux35: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	bus-frequency = <100000>;
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c14 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	adc@1d {
+		compatible = "ti,adc128d818";
+		reg = <0x1d>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	adc@36 {
+		compatible = "ti,adc128d818";
+		reg = <0x36>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	adc@37 {
+		compatible = "ti,adc128d818";
+		reg = <0x37>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+	};
+
+	power-sensor@42 {
+		compatible = "ti,ina230";
+		reg = <0x42>;
+	};
+
+	power-sensor@43 {
+		compatible = "ti,ina230";
+		reg = <0x43>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina230";
+		reg = <0x44>;
+	};
+
+	temperature-sensor@4e {
+		compatible = "ti,tmp75";
+		reg = <0x4e>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9544";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+
+		imux33: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+	};
+
+	i2c-mux@74 {
+		compatible = "nxp,pca9546";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux30: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			pwm@20 {
+				compatible = "maxim,max31790";
+				reg = <0x20>;
+			};
+
+			gpio@22 {
+				compatible = "ti,tca6424";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pwm@2f {
+				compatible = "maxim,max31790";
+				reg = <0x2f>;
+			};
+
+			adc@33 {
+				compatible = "maxim,max11615";
+				reg = <0x33>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+
+			gpio@61 {
+				compatible = "nxp,pca9552";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		imux31: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			pwm@20 {
+				compatible = "maxim,max31790";
+				reg = <0x20>;
+			};
+
+			gpio@22 {
+				compatible = "ti,tca6424";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pwm@2f {
+				compatible = "maxim,max31790";
+				reg = <0x2f>;
+			};
+
+			adc@33 {
+				compatible = "maxim,max11615";
+				reg = <0x33>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+
+			gpio@61 {
+				compatible = "nxp,pca9552";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	multi-master;
+	bus-frequency = <400000>;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9544";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux24: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux25: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux26: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux27: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&adc0 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+			&pinctrl_adc2_default &pinctrl_adc3_default
+			&pinctrl_adc4_default &pinctrl_adc5_default
+			&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+			&pinctrl_adc15_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts
index 8864e9c312a8..5143f85fbd70 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts
@@ -95,7 +95,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
 	use-ncsi;
-	mlx,multi-host;
+	mellanox,multi-host;
 };
 
 &adc {
@@ -207,11 +207,16 @@
 
 &i2c12 {
 	status = "okay";
-	//MEZZ_FRU
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-		pagesize = <32>;
+};
+
+&i2c13 {
+	status = "okay";
+	// Debug Card
+	multi-master;
+	ipmb13@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts
new file mode 100644
index 000000000000..839aad4ddd91
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-blueridge.dts"
+
+/ {
+	model = "Blueridge 4U";
+};
+
+&i2c3 {
+	power-supply@6a {
+		compatible = "ibm,cffps";
+		reg = <0x6a>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
new file mode 100644
index 000000000000..bc4c46235421
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
@@ -0,0 +1,1688 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-quad.dtsi"
+
+/ {
+	model = "Blueridge 2U";
+	compatible = "ibm,blueridge-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c2mux0;
+		i2c17 = &i2c2mux1;
+		i2c18 = &i2c2mux2;
+		i2c19 = &i2c2mux3;
+		i2c20 = &i2c4mux0chn0;
+		i2c21 = &i2c4mux0chn1;
+		i2c22 = &i2c4mux0chn2;
+		i2c23 = &i2c5mux0chn0;
+		i2c24 = &i2c5mux0chn1;
+		i2c25 = &i2c6mux0chn0;
+		i2c26 = &i2c6mux0chn1;
+		i2c27 = &i2c6mux0chn2;
+		i2c28 = &i2c6mux0chn3;
+		i2c29 = &i2c11mux0chn0;
+		i2c30 = &i2c11mux0chn1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: region@b3d00000 {
+			reg = <0xb3d00000 0x100000>;
+			no-map;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			reg = <0xb4000000 0x04000000>; /* 64M */
+			no-map;
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+			no-map;
+		};
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c2>;
+		idle-state = <0>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
+			    <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+
+		i2c2mux0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC Card fault LED at the back */
+		led-bmc-ingraham0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure ID LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			label = "fan0-presence";
+			linux,code = <6>;
+		};
+
+		event-fan1-presence {
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			label = "fan1-presence";
+			linux,code = <7>;
+		};
+
+		event-fan2-presence {
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			label = "fan2-presence";
+			linux,code = <8>;
+		};
+
+		event-fan3-presence {
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			label = "fan3-presence";
+			linux,code = <9>;
+		};
+
+		event-fan4-presence {
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			label = "fan4-presence";
+			linux,code = <10>;
+		};
+
+		event-fan5-presence {
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			label = "fan5-presence";
+			linux,code = <11>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"bmc-management-ready","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","",
+			"factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","",
+			"",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","",
+			"",
+	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
+			"power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	i2c3-mux-oe-n-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
+		line-name = "I2C3_MUX_OE_N";
+		output-high;
+	};
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	gpio@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"DASD_BP2_PRESENT_N",
+			"DASD_BP1_PRESENT_N",
+			"DASD_BP0_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
+			"SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
+			"SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
+			"SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
+			"SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
+			"", "", "", "", "", "";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard0-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard0-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard3-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard3-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard4-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard4-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp275";
+		reg = <0x4b>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "pcieslot0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "pcieslot1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "pcieslot2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "pcieslot3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "pcieslot4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "cpu1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "cpu-vrm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "lcd-russel";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm16";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm17";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm18";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm20";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm21";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm22";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm23";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm24";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm25";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm26";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm27";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm28";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm29";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm30";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm31";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "planar";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "cpu0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "dasd-pyramid0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "dasd-pyramid1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "dasd-pyramid2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "cpu0-vrm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "rtc-battery";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "base-blyth";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "pcieslot6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "pcieslot7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "pcieslot8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "pcieslot9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "pcieslot10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "pcieslot11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "tpm-wilson";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	humidity-sensor@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	pwm@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "front-sys-id0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "front-check-log0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "front-enc-fault1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "front-sys-pwron0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca0: led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "fan0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "fan1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "fan2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "fan3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "fan4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "fan5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	lcd-controller@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	pressure-sensor@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pmic@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES",
+			"", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N",
+			"power-config-full-load", "";
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
+			"SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
+			"SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
+			"SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
+			"SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
+			"SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
+			"", "", "", "";
+	};
+
+};
+
+&i2c9 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	temperature-sensor@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	temperature-sensor@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard10-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard10-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "nvme0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "nvme1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "nvme2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "nvme3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "nvme4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "nvme5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "nvme6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "nvme7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "nvme8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "nvme9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "nvme10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "nvme11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "nvme12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "nvme13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "nvme14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "nvme15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "nvme16";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "nvme17";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "nvme18";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "nvme19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "nvme20";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "nvme21";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "nvme22";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "nvme23";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
new file mode 100644
index 000000000000..2f5d4075a64a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
@@ -0,0 +1,612 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Bonnell";
+	compatible = "ibm,bonnell-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c11mux0chn0;
+		i2c17 = &i2c11mux0chn1;
+		i2c18 = &i2c11mux0chn2;
+		i2c19 = &i2c11mux0chn3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: tcg_event_log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/	"","","","","","","","",
+		/*B0-B7*/	"","","","","","","checkstop","",
+		/*C0-C7*/	"","","","","","","","",
+		/*D0-D7*/	"","","","","","","","",
+		/*E0-E7*/	"","","","","","","","",
+		/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","","",
+		/*G0-G7*/	"fan0","fan1","","","","","","",
+		/*H0-H7*/	"","","rear-enc-id0","rear-enc-fault0","","","","",
+		/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+		/*J0-J7*/	"","","","","","","","",
+		/*K0-K7*/	"","","","","","","","",
+		/*L0-L7*/	"","","","","","","","",
+		/*M0-M7*/	"","","","","","","","",
+		/*N0-N7*/	"","","","","","","","",
+		/*O0-O7*/	"","","","usb-power","","","","",
+		/*P0-P7*/	"","","","","","","","",
+		/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+		/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+		/*S0-S7*/	"presence-ps0","presence-ps1","","","power-ffs-sync-history","","","",
+		/*T0-T7*/	"","","","","","","","",
+		/*U0-U7*/	"","","","","","","","",
+		/*V0-V7*/	"","","","","","","","",
+		/*W0-W7*/	"","","","","","","","",
+		/*X0-X7*/	"","","","","","","","",
+		/*Y0-Y7*/	"","","","","","","","",
+		/*Z0-Z7*/	"","","","","","","","";
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"",
+			"",
+			"DASD_BP_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@5a {
+		compatible = "acbel,fsg032";
+		reg = <0x5a>;
+	};
+
+	power-supply@5b {
+		compatible = "acbel,fsg032";
+		reg = <0x5b>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan0: fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+		};
+
+		fan1: fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+		};
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "front-sys-id0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "front-check-log0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "front-enc-fault1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "front-sys-pwron0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"APSS_RESET_N",
+			"",
+			"N_MODE_CPU_N",
+			"",
+			"",
+			"P10_DCM_PRESENT",
+			"";
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "BOOT_RCVRY_TWI",
+			"BOOT_RCVRY_UART",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"PE_SWITCH_RSTB_N";
+	};
+
+	tmp435@4c {
+		compatible = "ti,tmp435";
+		reg = <0x4c>;
+	};
+
+	pca9849@75 {
+		compatible = "nxp,pca9849";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c11mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c11mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme3";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme2";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power10-dual.dtsi"
+
+&cfam0_i2c10 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
+
+&cfam0_i2c11 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
+
+&cfam0_i2c12 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
+
+&cfam0_i2c13 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
new file mode 100644
index 000000000000..9f144f527f03
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
@@ -0,0 +1,4046 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Everest";
+	compatible = "ibm,everest-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c500 = &cfam4_i2c0;
+		i2c501 = &cfam4_i2c1;
+		i2c510 = &cfam4_i2c10;
+		i2c511 = &cfam4_i2c11;
+		i2c512 = &cfam4_i2c12;
+		i2c513 = &cfam4_i2c13;
+		i2c514 = &cfam4_i2c14;
+		i2c515 = &cfam4_i2c15;
+		i2c602 = &cfam5_i2c2;
+		i2c603 = &cfam5_i2c3;
+		i2c610 = &cfam5_i2c10;
+		i2c611 = &cfam5_i2c11;
+		i2c614 = &cfam5_i2c14;
+		i2c615 = &cfam5_i2c15;
+		i2c616 = &cfam5_i2c16;
+		i2c617 = &cfam5_i2c17;
+		i2c700 = &cfam6_i2c0;
+		i2c701 = &cfam6_i2c1;
+		i2c710 = &cfam6_i2c10;
+		i2c711 = &cfam6_i2c11;
+		i2c712 = &cfam6_i2c12;
+		i2c713 = &cfam6_i2c13;
+		i2c714 = &cfam6_i2c14;
+		i2c715 = &cfam6_i2c15;
+		i2c802 = &cfam7_i2c2;
+		i2c803 = &cfam7_i2c3;
+		i2c810 = &cfam7_i2c10;
+		i2c811 = &cfam7_i2c11;
+		i2c814 = &cfam7_i2c14;
+		i2c815 = &cfam7_i2c15;
+		i2c816 = &cfam7_i2c16;
+		i2c817 = &cfam7_i2c17;
+
+		i2c16 = &i2c4mux0chn0;
+		i2c17 = &i2c4mux0chn1;
+		i2c18 = &i2c4mux0chn2;
+		i2c19 = &i2c5mux0chn0;
+		i2c20 = &i2c5mux0chn1;
+		i2c21 = &i2c5mux0chn2;
+		i2c22 = &i2c5mux0chn3;
+		i2c23 = &i2c6mux0chn0;
+		i2c24 = &i2c6mux0chn1;
+		i2c25 = &i2c6mux0chn2;
+		i2c26 = &i2c6mux0chn3;
+		i2c27 = &i2c14mux0chn0;
+		i2c28 = &i2c14mux0chn1;
+		i2c29 = &i2c14mux0chn2;
+		i2c30 = &i2c14mux0chn3;
+		i2c31 = &i2c14mux1chn0;
+		i2c32 = &i2c14mux1chn1;
+		i2c33 = &i2c14mux1chn2;
+		i2c34 = &i2c14mux1chn3;
+		i2c35 = &i2c15mux0chn0;
+		i2c36 = &i2c15mux0chn1;
+		i2c37 = &i2c15mux0chn2;
+		i2c38 = &i2c15mux0chn3;
+		i2c39 = &i2c15mux1chn0;
+		i2c40 = &i2c15mux1chn1;
+		i2c41 = &i2c15mux1chn2;
+		i2c42 = &i2c15mux1chn3;
+		i2c43 = &i2c15mux2chn0;
+		i2c44 = &i2c15mux2chn1;
+		i2c45 = &i2c15mux2chn2;
+		i2c46 = &i2c15mux2chn3;
+		i2c47 = &i2c8mux0chn0;
+		i2c48 = &i2c8mux0chn1;
+
+		serial4 = &uart5;
+
+		sbefifo500 = &sbefifo500;
+		sbefifo501 = &sbefifo501;
+		sbefifo510 = &sbefifo510;
+		sbefifo511 = &sbefifo511;
+		sbefifo512 = &sbefifo512;
+		sbefifo513 = &sbefifo513;
+		sbefifo514 = &sbefifo514;
+		sbefifo515 = &sbefifo515;
+		sbefifo602 = &sbefifo602;
+		sbefifo603 = &sbefifo603;
+		sbefifo610 = &sbefifo610;
+		sbefifo611 = &sbefifo611;
+		sbefifo614 = &sbefifo614;
+		sbefifo615 = &sbefifo615;
+		sbefifo616 = &sbefifo616;
+		sbefifo617 = &sbefifo617;
+		sbefifo700 = &sbefifo700;
+		sbefifo701 = &sbefifo701;
+		sbefifo710 = &sbefifo710;
+		sbefifo711 = &sbefifo711;
+		sbefifo712 = &sbefifo712;
+		sbefifo713 = &sbefifo713;
+		sbefifo714 = &sbefifo714;
+		sbefifo715 = &sbefifo715;
+		sbefifo802 = &sbefifo802;
+		sbefifo803 = &sbefifo803;
+		sbefifo810 = &sbefifo810;
+		sbefifo811 = &sbefifo811;
+		sbefifo814 = &sbefifo814;
+		sbefifo815 = &sbefifo815;
+		sbefifo816 = &sbefifo816;
+		sbefifo817 = &sbefifo817;
+
+		scom500 = &scom500;
+		scom501 = &scom501;
+		scom510 = &scom510;
+		scom511 = &scom511;
+		scom512 = &scom512;
+		scom513 = &scom513;
+		scom514 = &scom514;
+		scom515 = &scom515;
+		scom602 = &scom602;
+		scom603 = &scom603;
+		scom610 = &scom610;
+		scom611 = &scom611;
+		scom614 = &scom614;
+		scom615 = &scom615;
+		scom616 = &scom616;
+		scom617 = &scom617;
+		scom700 = &scom700;
+		scom701 = &scom701;
+		scom710 = &scom710;
+		scom711 = &scom711;
+		scom712 = &scom712;
+		scom713 = &scom713;
+		scom714 = &scom714;
+		scom715 = &scom715;
+		scom802 = &scom802;
+		scom803 = &scom803;
+		scom810 = &scom810;
+		scom811 = &scom811;
+		scom814 = &scom814;
+		scom815 = &scom815;
+		scom816 = &scom816;
+		scom817 = &scom817;
+
+		spi50 = &cfam4_spi0;
+		spi51 = &cfam4_spi1;
+		spi52 = &cfam4_spi2;
+		spi53 = &cfam4_spi3;
+		spi60 = &cfam5_spi0;
+		spi61 = &cfam5_spi1;
+		spi62 = &cfam5_spi2;
+		spi63 = &cfam5_spi3;
+		spi70 = &cfam6_spi0;
+		spi71 = &cfam6_spi1;
+		spi72 = &cfam6_spi2;
+		spi73 = &cfam6_spi3;
+		spi80 = &cfam7_spi0;
+		spi81 = &cfam7_spi1;
+		spi82 = &cfam7_spi2;
+		spi83 = &cfam7_spi3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: tcg_event_log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>; /* 16M */
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+			linux,code = <15>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* RTC battery fault LED at the back */
+		led-rtc-battery {
+			gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		/* BMC Card fault LED at the back */
+		led-bmc {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure Identify LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+				 &pinctrl_adc10_default &pinctrl_adc11_default
+				 &pinctrl_adc12_default &pinctrl_adc13_default
+				 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"USERSPACE_RSTIND_BUFF","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",
+	/*S0-S7*/	"","","","","power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","BMC_3RESTART_ATTEMPT_P","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/   "","","","","","","","";
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pca1: pca9552@62 {
+		compatible = "nxp,pca9552";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-ps0",
+			"presence-ps1",
+			"presence-ps2",
+			"presence-ps3",
+			"presence-pdb",
+			"presence-tpm",
+			"", "",
+			"presence-cp0",
+			"presence-cp1",
+			"presence-cp2",
+			"presence-cp3",
+			"presence-dasd",
+			"presence-lcd-op",
+			"presence-base-op",
+			"";
+	};
+
+	led-controller@63 {
+		compatible = "nxp,pca9552";
+		reg = <0x63>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-vrm-c12",
+			"presence-vrm-c13",
+			"presence-vrm-c15",
+			"presence-vrm-c16",
+			"presence-vrm-c17",
+			"presence-vrm-c18",
+			"presence-vrm-c20",
+			"presence-vrm-c21",
+			"presence-vrm-c54",
+			"presence-vrm-c55",
+			"presence-vrm-c57",
+			"presence-vrm-c58",
+			"presence-vrm-c59",
+			"presence-vrm-c60",
+			"presence-vrm-c62",
+			"presence-vrm-c63";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+
+	power-supply@6d {
+		compatible = "ibm,cffps";
+		reg = <0x6d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	pca2: pca9552@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card1",
+			"presence-cable-card2",
+			"presence-cable-card3",
+			"presence-cable-card4",
+			"presence-cable-card5",
+			"expander-cable-card1",
+			"expander-cable-card2",
+			"expander-cable-card3",
+			"expander-cable-card4",
+			"expander-cable-card5";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c01: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c01-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c01-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca_cable_card_c02: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c02-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c02-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c03: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c03-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c03-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca3: pca9552@66 {
+		compatible = "nxp,pca9552";
+		reg = <0x66>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card6",
+			"presence-cable-card7",
+			"presence-cable-card8",
+			"presence-cable-card9",
+			"presence-cable-card10",
+			"presence-cable-card11",
+			"expander-cable-card6",
+			"expander-cable-card7",
+			"expander-cable-card8",
+			"expander-cable-card9",
+			"expander-cable-card10",
+			"expander-cable-card11";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca_cable_card_c04: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c04-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c04-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c05: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c05-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c05-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c06: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c06-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c06-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			pca_cable_card_c07: pca9551@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c07-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c07-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+			};
+
+			pca_cable_card_c08: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c08-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c08-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c09: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c09-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c09-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			pca_cable_card_c10: pca9551@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c10-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c10-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c11: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c11-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c11-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+
+	pca_pcie_slot: pca9552@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@1 {
+			label = "pcieslot-c01";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "pcieslot-c02";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcieslot-c03";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcieslot-c04";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcieslot-c05";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcieslot-c06";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcieslot-c07";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcieslot-c08";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcieslot-c09";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcieslot-c10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcieslot-c11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	pic0_dimm: pca9552@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm8";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm9";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic1_dimm: pca9552@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm24";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm25";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm26";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm27";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm28";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm29";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm30";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm31";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic2_dimm: pca9552@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm32";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm33";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm34";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm35";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm36";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm37";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm38";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm39";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm40";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm41";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm42";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm43";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm44";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm45";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm46";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm47";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic3_dimm: pca9552@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm48";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm49";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm50";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm51";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm52";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm53";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm54";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm55";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm56";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm57";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm58";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm59";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm60";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm61";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm62";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm63";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic0_vrm_misc: pca9552@34 {
+		compatible = "ibm,pca9552";
+		reg = <0x34>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "planar";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "tpm";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "cpu3-c61";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "cpu0-c14";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "opencapi-connector3";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "opencapi-connector4";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "opencapi-connector5";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "vrm4";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "vrm5";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "vrm6";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "vrm7";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "vrm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "vrm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "vrm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "vrm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic1_vrm_misc: pca9552@35 {
+		compatible = "ibm,pca9552";
+		reg = <0x35>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "dasd-backplane";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "power-distribution";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "cpu1-c19";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "cpu2-c56";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "opencapi-connector0";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "opencapi-connector1";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "opencapi-connector2";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "vrm0";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "vrm1";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "vrm2";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "vrm3";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "vrm8";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "vrm9";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "vrm10";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "vrm11";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	ucd90320@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c8mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c14 {
+	multi-master;
+	status = "okay";
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		idle-state = <1>;
+
+		i2c14mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@51 {
+				compatible = "atmel,24c32";
+				reg = <0x51>;
+			};
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			pca_oppanel: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "front-sys-id0";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "front-check-log0";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "front-enc-fault1";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "front-sys-pwron0";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			max31785@52 {
+				compatible = "maxim,max31785a";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x52>;
+
+				fan@0 {
+					compatible = "pmbus-fan";
+					reg = <0>;
+					tach-pulses = <2>;
+				};
+
+				fan@1 {
+					compatible = "pmbus-fan";
+					reg = <1>;
+					tach-pulses = <2>;
+				};
+
+				fan@2 {
+					compatible = "pmbus-fan";
+					reg = <2>;
+					tach-pulses = <2>;
+				};
+
+				fan@3 {
+					compatible = "pmbus-fan";
+					reg = <3>;
+					tach-pulses = <2>;
+				};
+			};
+
+			pca_fan_nvme: pca9552@60 {
+				compatible = "nxp,pca9552";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "nvme0";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "nvme1";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "nvme2";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "nvme3";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@4 {
+					label = "nvme4";
+					reg = <4>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@5 {
+					label = "nvme5";
+					reg = <5>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@6 {
+					label = "nvme6";
+					reg = <6>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@7 {
+					label = "nvme7";
+					reg = <7>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@8 {
+					label = "nvme8";
+					reg = <8>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@9 {
+					label = "nvme9";
+					reg = <9>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@10 {
+					label = "fan0";
+					reg = <10>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@11 {
+					label = "fan1";
+					reg = <11>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@12 {
+					label = "fan2";
+					reg = <12>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@13 {
+					label = "fan3";
+					reg = <13>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			pca0: pca9552@61 {
+				compatible = "nxp,pca9552";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x61>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				gpio-line-names =
+					"","","","",
+					"","","","",
+					"","","","",
+					"presence-fan3",
+					"presence-fan2",
+					"presence-fan1",
+					"presence-fan0";
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c14mux1chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux1chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux2chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c15mux2chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <210>, <228>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power10-quad.dtsi"
+
+&fsi_hub0 {
+	cfam@4,0 { /* DCM2_C0 */
+		reg = <4 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <4>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_i2c0: i2c-bus@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;	/* OM01 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom500: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo500: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c1: i2c-bus@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;	/* OM23 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom501: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo501: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom510: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo510: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom511: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo511: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c12: i2c-bus@c {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <12>;	/* OP4A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom512: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo512: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c13: i2c-bus@d {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <13>;	/* OP4B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom513: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo513: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom514: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo514: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom515: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo515: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ4: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub4: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@5,0 { /* DCM2_C1 */
+		reg = <5 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <5>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_i2c2: i2c-bus@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;	/* OM45 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom602: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo602: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c3: i2c-bus@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;	/* OM67 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom603: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo603: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom610: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo610: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom611: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo611: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom614: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo614: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom615: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo615: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c16: i2c-bus@10 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <16>;	/* OP6A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom616: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo616: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c17: i2c-bus@11 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <17>;	/* OP6B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom617: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo617: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ5: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub5: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@6,0 { /* DCM3_C0 */
+		reg = <6 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <6>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_i2c0: i2c-bus@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;	/* OM01 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom700: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo700: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c1: i2c-bus@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;	/* OM23 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom701: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo701: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom710: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo710: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom711: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo711: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c12: i2c-bus@c {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <12>;	/* OP4A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom712: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo712: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c13: i2c-bus@d {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <13>;	/* OP4B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom713: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo713: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom714: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo714: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom715: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo715: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ6: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub6: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@7,0 { /* DCM3_C1 */
+		reg = <7 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <7>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_i2c2: i2c-bus@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;	/* OM45 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom802: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo802: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c3: i2c-bus@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;	/* OM67 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom803: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo803: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom810: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo810: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom811: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo811: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom814: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo814: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom815: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo815: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c16: i2c-bus@10 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <16>;	/* OP6A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom816: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo816: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c17: i2c-bus@11 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <17>;	/* OP6B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom817: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo817: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ7: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub7: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ4 {
+	reg = <5>;
+};
+
+&fsi_occ5 {
+	reg = <6>;
+};
+
+&fsi_occ6 {
+	reg = <7>;
+};
+
+&fsi_occ7 {
+	reg = <8>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
new file mode 100644
index 000000000000..9a43fc7bcebe
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
@@ -0,0 +1,3903 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-quad.dtsi"
+
+/ {
+	model = "Fuji";
+	compatible = "ibm,fuji-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c500 = &cfam4_i2c0;
+		i2c501 = &cfam4_i2c1;
+		i2c510 = &cfam4_i2c10;
+		i2c511 = &cfam4_i2c11;
+		i2c512 = &cfam4_i2c12;
+		i2c513 = &cfam4_i2c13;
+		i2c514 = &cfam4_i2c14;
+		i2c515 = &cfam4_i2c15;
+		i2c602 = &cfam5_i2c2;
+		i2c603 = &cfam5_i2c3;
+		i2c610 = &cfam5_i2c10;
+		i2c611 = &cfam5_i2c11;
+		i2c614 = &cfam5_i2c14;
+		i2c615 = &cfam5_i2c15;
+		i2c616 = &cfam5_i2c16;
+		i2c617 = &cfam5_i2c17;
+		i2c700 = &cfam6_i2c0;
+		i2c701 = &cfam6_i2c1;
+		i2c710 = &cfam6_i2c10;
+		i2c711 = &cfam6_i2c11;
+		i2c712 = &cfam6_i2c12;
+		i2c713 = &cfam6_i2c13;
+		i2c714 = &cfam6_i2c14;
+		i2c715 = &cfam6_i2c15;
+		i2c802 = &cfam7_i2c2;
+		i2c803 = &cfam7_i2c3;
+		i2c810 = &cfam7_i2c10;
+		i2c811 = &cfam7_i2c11;
+		i2c814 = &cfam7_i2c14;
+		i2c815 = &cfam7_i2c15;
+		i2c816 = &cfam7_i2c16;
+		i2c817 = &cfam7_i2c17;
+
+		i2c16 = &i2c4mux0chn0;
+		i2c17 = &i2c4mux0chn1;
+		i2c18 = &i2c4mux0chn2;
+		i2c19 = &i2c5mux0chn0;
+		i2c20 = &i2c5mux0chn1;
+		i2c21 = &i2c5mux0chn2;
+		i2c22 = &i2c5mux0chn3;
+		i2c23 = &i2c6mux0chn0;
+		i2c24 = &i2c6mux0chn1;
+		i2c25 = &i2c6mux0chn2;
+		i2c26 = &i2c6mux0chn3;
+		i2c27 = &i2c14mux0chn0;
+		i2c28 = &i2c14mux0chn1;
+		i2c29 = &i2c14mux0chn2;
+		i2c30 = &i2c14mux0chn3;
+		i2c31 = &i2c14mux1chn0;
+		i2c32 = &i2c14mux1chn1;
+		i2c33 = &i2c14mux1chn2;
+		i2c34 = &i2c14mux1chn3;
+		i2c35 = &i2c15mux0chn0;
+		i2c36 = &i2c15mux0chn1;
+		i2c37 = &i2c15mux0chn2;
+		i2c38 = &i2c15mux0chn3;
+		i2c39 = &i2c15mux1chn0;
+		i2c40 = &i2c15mux1chn1;
+		i2c41 = &i2c15mux1chn2;
+		i2c42 = &i2c15mux1chn3;
+		i2c43 = &i2c15mux2chn0;
+		i2c44 = &i2c15mux2chn1;
+		i2c45 = &i2c15mux2chn2;
+		i2c46 = &i2c15mux2chn3;
+		i2c47 = &i2c8mux0chn0;
+		i2c48 = &i2c8mux0chn1;
+
+		serial4 = &uart5;
+
+		sbefifo500 = &sbefifo500;
+		sbefifo501 = &sbefifo501;
+		sbefifo510 = &sbefifo510;
+		sbefifo511 = &sbefifo511;
+		sbefifo512 = &sbefifo512;
+		sbefifo513 = &sbefifo513;
+		sbefifo514 = &sbefifo514;
+		sbefifo515 = &sbefifo515;
+		sbefifo602 = &sbefifo602;
+		sbefifo603 = &sbefifo603;
+		sbefifo610 = &sbefifo610;
+		sbefifo611 = &sbefifo611;
+		sbefifo614 = &sbefifo614;
+		sbefifo615 = &sbefifo615;
+		sbefifo616 = &sbefifo616;
+		sbefifo617 = &sbefifo617;
+		sbefifo700 = &sbefifo700;
+		sbefifo701 = &sbefifo701;
+		sbefifo710 = &sbefifo710;
+		sbefifo711 = &sbefifo711;
+		sbefifo712 = &sbefifo712;
+		sbefifo713 = &sbefifo713;
+		sbefifo714 = &sbefifo714;
+		sbefifo715 = &sbefifo715;
+		sbefifo802 = &sbefifo802;
+		sbefifo803 = &sbefifo803;
+		sbefifo810 = &sbefifo810;
+		sbefifo811 = &sbefifo811;
+		sbefifo814 = &sbefifo814;
+		sbefifo815 = &sbefifo815;
+		sbefifo816 = &sbefifo816;
+		sbefifo817 = &sbefifo817;
+
+		scom500 = &scom500;
+		scom501 = &scom501;
+		scom510 = &scom510;
+		scom511 = &scom511;
+		scom512 = &scom512;
+		scom513 = &scom513;
+		scom514 = &scom514;
+		scom515 = &scom515;
+		scom602 = &scom602;
+		scom603 = &scom603;
+		scom610 = &scom610;
+		scom611 = &scom611;
+		scom614 = &scom614;
+		scom615 = &scom615;
+		scom616 = &scom616;
+		scom617 = &scom617;
+		scom700 = &scom700;
+		scom701 = &scom701;
+		scom710 = &scom710;
+		scom711 = &scom711;
+		scom712 = &scom712;
+		scom713 = &scom713;
+		scom714 = &scom714;
+		scom715 = &scom715;
+		scom802 = &scom802;
+		scom803 = &scom803;
+		scom810 = &scom810;
+		scom811 = &scom811;
+		scom814 = &scom814;
+		scom815 = &scom815;
+		scom816 = &scom816;
+		scom817 = &scom817;
+
+		spi50 = &cfam4_spi0;
+		spi51 = &cfam4_spi1;
+		spi52 = &cfam4_spi2;
+		spi53 = &cfam4_spi3;
+		spi60 = &cfam5_spi0;
+		spi61 = &cfam5_spi1;
+		spi62 = &cfam5_spi2;
+		spi63 = &cfam5_spi3;
+		spi70 = &cfam6_spi0;
+		spi71 = &cfam6_spi1;
+		spi72 = &cfam6_spi2;
+		spi73 = &cfam6_spi3;
+		spi80 = &cfam7_spi0;
+		spi81 = &cfam7_spi1;
+		spi82 = &cfam7_spi2;
+		spi83 = &cfam7_spi3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: region@b3d00000 {
+			reg = <0xb3d00000 0x100000>;
+			no-map;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			reg = <0xb4000000 0x04000000>; /* 64M */
+			no-map;
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>; /* 16M */
+			no-map;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+			label = "fan0-presence";
+			linux,code = <15>;
+		};
+
+		event-fan1-presence {
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+			label = "fan1-presence";
+			linux,code = <14>;
+		};
+
+		event-fan2-presence {
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			label = "fan2-presence";
+			linux,code = <13>;
+		};
+
+		event-fan3-presence {
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			label = "fan3-presence";
+			linux,code = <12>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* RTC battery fault LED at the back */
+		led-rtc-battery {
+			gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		/* BMC Card fault LED at the back */
+		led-bmc {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure Identify LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+				 &pinctrl_adc10_default &pinctrl_adc11_default
+				 &pinctrl_adc12_default &pinctrl_adc13_default
+				 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"bmc-management-ready","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","",
+			"factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","",
+			"","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","",
+			"I2C_FLASH_MICRO_N","","",
+	/*S0-S7*/	"","","","","power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","BMC_3RESTART_ATTEMPT_P","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	led-controller@62 {
+		compatible = "nxp,pca9552";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-ps0",
+			"presence-ps1",
+			"presence-ps2",
+			"presence-ps3",
+			"presence-pdb",
+			"presence-tpm",
+			"", "",
+			"presence-cp0",
+			"presence-cp1",
+			"presence-cp2",
+			"presence-cp3",
+			"presence-dasd",
+			"presence-lcd-op",
+			"presence-base-op",
+			"";
+	};
+
+	led-controller@63 {
+		compatible = "nxp,pca9552";
+		reg = <0x63>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-vrm-c12",
+			"presence-vrm-c13",
+			"presence-vrm-c15",
+			"presence-vrm-c16",
+			"presence-vrm-c17",
+			"presence-vrm-c18",
+			"presence-vrm-c20",
+			"presence-vrm-c21",
+			"presence-vrm-c54",
+			"presence-vrm-c55",
+			"presence-vrm-c57",
+			"presence-vrm-c58",
+			"presence-vrm-c59",
+			"presence-vrm-c60",
+			"presence-vrm-c62",
+			"presence-vrm-c63";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+
+	power-supply@6d {
+		compatible = "ibm,cffps";
+		reg = <0x6d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	led-controller@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card1",
+			"presence-cable-card2",
+			"presence-cable-card3",
+			"presence-cable-card4",
+			"presence-cable-card5",
+			"expander-cable-card1",
+			"expander-cable-card2",
+			"expander-cable-card3",
+			"expander-cable-card4",
+			"expander-cable-card5";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			led-controller@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c01-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c01-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c02-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c02-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c03-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c03-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	led-controller@66 {
+		compatible = "nxp,pca9552";
+		reg = <0x66>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card6",
+			"presence-cable-card7",
+			"presence-cable-card8",
+			"presence-cable-card9",
+			"presence-cable-card10",
+			"presence-cable-card11",
+			"expander-cable-card6",
+			"expander-cable-card7",
+			"expander-cable-card8",
+			"expander-cable-card9",
+			"expander-cable-card10",
+			"expander-cable-card11";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c04-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c04-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c05-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c05-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			led-controller@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c06-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c06-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			led-controller@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c07-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c07-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c08-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c08-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			led-controller@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c09-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c09-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			led-controller@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c10-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c10-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c11-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c11-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+
+	led-controller@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "pcieslot-c01";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "pcieslot-c02";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "pcieslot-c03";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "pcieslot-c04";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "pcieslot-c05";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "pcieslot-c06";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "pcieslot-c07";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "pcieslot-c08";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "pcieslot-c09";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "pcieslot-c10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "pcieslot-c11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	led-controller@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm16";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm17";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm18";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm20";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm21";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm22";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm23";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm24";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm25";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm26";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm27";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm28";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm29";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm30";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm31";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm32";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm33";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm34";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm35";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm36";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm37";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm38";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm39";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm40";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm41";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm42";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm43";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm44";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm45";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm46";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm47";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm48";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm49";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm50";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm51";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm52";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm53";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm54";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm55";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm56";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm57";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm58";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm59";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm60";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm61";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm62";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm63";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@34 {
+		compatible = "ibm,pca9552";
+		reg = <0x34>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "planar";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "tpm";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "cpu3-c61";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "cpu0-c14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "opencapi-connector3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "opencapi-connector4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "opencapi-connector5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "vrm4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "vrm5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "vrm6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "vrm7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "vrm12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "vrm13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "vrm14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "vrm15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@35 {
+		compatible = "ibm,pca9552";
+		reg = <0x35>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "dasd-backplane";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "power-distribution";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "cpu1-c19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "cpu2-c56";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "opencapi-connector0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "opencapi-connector1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "opencapi-connector2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "vrm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "vrm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "vrm2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "vrm3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "vrm8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "vrm9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "vrm10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "vrm11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pmic@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+		reset-gpio = <&gpio0 ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
+
+		i2c8mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c14 {
+	multi-master;
+	status = "okay";
+
+	lcd-controller@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		idle-state = <1>;
+
+		i2c14mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c32";
+				reg = <0x51>;
+			};
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "front-sys-id0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "front-check-log0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					reg = <2>;
+					default-state = "keep";
+					label = "front-enc-fault1";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					reg = <3>;
+					default-state = "keep";
+					label = "front-sys-pwron0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pwm@52 {
+				compatible = "maxim,max31785a";
+				reg = <0x52>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9552";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "nvme0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "nvme1";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					reg = <2>;
+					default-state = "keep";
+					label = "nvme2";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					reg = <3>;
+					default-state = "keep";
+					label = "nvme3";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@4 {
+					reg = <4>;
+					default-state = "keep";
+					label = "nvme4";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@5 {
+					reg = <5>;
+					default-state = "keep";
+					label = "nvme5";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@6 {
+					reg = <6>;
+					default-state = "keep";
+					label = "nvme6";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@7 {
+					reg = <7>;
+					default-state = "keep";
+					label = "nvme7";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@8 {
+					reg = <8>;
+					default-state = "keep";
+					label = "nvme8";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@9 {
+					reg = <9>;
+					default-state = "keep";
+					label = "nvme9";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@a {
+					reg = <10>;
+					default-state = "keep";
+					label = "fan0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@b {
+					reg = <11>;
+					default-state = "keep";
+					label = "fan1";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@c {
+					reg = <12>;
+					default-state = "keep";
+					label = "fan2";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@d {
+					reg = <13>;
+					default-state = "keep";
+					label = "fan3";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			pca0: led-controller@61 {
+				compatible = "nxp,pca9552";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x61>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				gpio-line-names =
+					"","","","",
+					"","","","",
+					"","","","",
+					"presence-fan3",
+					"presence-fan2",
+					"presence-fan1",
+					"presence-fan0";
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c14mux1chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux1chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux2chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c15mux2chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <210>, <228>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&fsi_hub0 {
+	cfam@4,0 { /* DCM2_C0 */
+		reg = <4 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <4>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom500: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo500: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom501: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo501: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom510: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo510: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom511: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo511: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom512: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo512: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom513: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo513: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom514: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo514: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom515: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo515: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam4_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam4_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam4_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@5,0 { /* DCM2_C1 */
+		reg = <5 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <5>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom602: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo602: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom603: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo603: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom610: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo610: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom611: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo611: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom614: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo614: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom615: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo615: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom616: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo616: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom617: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo617: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam5_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam5_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam5_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@6,0 { /* DCM3_C0 */
+		reg = <6 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <6>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom700: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo700: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom701: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo701: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom710: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo710: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom711: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo711: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom712: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo712: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom713: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo713: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom714: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo714: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom715: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo715: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam6_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam6_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam6_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@7,0 { /* DCM3_C1 */
+		reg = <7 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <7>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom802: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo802: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom803: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo803: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom810: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo810: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom811: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo811: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom814: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo814: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom815: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo815: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom816: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo816: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom817: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo817: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam7_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam7_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam7_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dts
index f5f5b18c113a..f5f5b18c113a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dts
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dts
index 342546a3c0f5..342546a3c0f5 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dts
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
new file mode 100644
index 000000000000..c5fb5d410001
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
@@ -0,0 +1,1737 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Rainier 2U";
+	compatible = "ibm,rainier-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c2mux0;
+		i2c17 = &i2c2mux1;
+		i2c18 = &i2c2mux2;
+		i2c19 = &i2c2mux3;
+		i2c20 = &i2c4mux0chn0;
+		i2c21 = &i2c4mux0chn1;
+		i2c22 = &i2c4mux0chn2;
+		i2c23 = &i2c5mux0chn0;
+		i2c24 = &i2c5mux0chn1;
+		i2c25 = &i2c6mux0chn0;
+		i2c26 = &i2c6mux0chn1;
+		i2c27 = &i2c6mux0chn2;
+		i2c28 = &i2c6mux0chn3;
+		i2c29 = &i2c11mux0chn0;
+		i2c30 = &i2c11mux0chn1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	i2c2mux: i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		i2c-parent = <&i2c2>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
+			    <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+
+		i2c2mux0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c2mux1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c2mux2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c2mux3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC Card fault LED at the back */
+		led-bmc-ingraham0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure ID LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
+	"power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	i2c3-mux-oe-n-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "I2C3_MUX_OE_N";
+	};
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	tca_pres1: tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"DASD_BP2_PRESENT_N",
+			"DASD_BP1_PRESENT_N",
+			"DASD_BP0_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	pca_pres1: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
+			"SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
+			"SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
+			"SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
+			"SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
+			"", "", "", "", "", "";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard0-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard0-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard3-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard3-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard4-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard4-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	tmp275@4b {
+		compatible = "ti,tmp275";
+		reg = <0x4b>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	pca9552@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "pcieslot0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "pcieslot1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "pcieslot2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcieslot3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcieslot4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "cpu1";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "cpu-vrm1";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "lcd-russel";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm8";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm9";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm24";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm25";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm26";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm27";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm28";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm29";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm30";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm31";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "planar";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "cpu0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "dasd-pyramid0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "dasd-pyramid1";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "dasd-pyramid2";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "cpu0-vrm0";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "rtc-battery";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "base-blyth";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcieslot6";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcieslot7";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcieslot8";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "pcieslot9";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "pcieslot10";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pcieslot11";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "tpm-wilson";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	max: max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan0: fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+		};
+
+		fan1: fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+		};
+
+		fan2: fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+		};
+
+		fan3: fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+		};
+
+		fan4: fan@4 {
+			compatible = "pmbus-fan";
+			reg = <4>;
+			tach-pulses = <2>;
+		};
+
+		fan5: fan@5 {
+			compatible = "pmbus-fan";
+			reg = <5>;
+			tach-pulses = <2>;
+		};
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "front-sys-id0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "front-check-log0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "front-enc-fault1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "front-sys-pwron0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca0: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "fan0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "fan1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "fan2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "fan3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "fan4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "fan5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	ucd90320@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pca_pres3: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES",
+			"", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N",
+			"power-config-full-load", "";
+	};
+
+	pca_pres2: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
+			"SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
+			"SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
+			"SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
+			"SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
+			"SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
+			"", "", "", "";
+	};
+
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	tmp423b@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	tmp423b@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard10-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard10-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme8";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme9";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme10";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme11";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme12";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme13";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme14";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme15";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power10-quad.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
new file mode 100644
index 000000000000..dbadba8eb698
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
@@ -0,0 +1,6086 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/i2c/i2c.h>
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "IBM SBP1";
+	compatible = "ibm,sbp1-bmc", "aspeed,ast2600";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "LED_BMC_READY";
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			retain-state-suspended;
+			panic-indicator;
+		};
+
+		led-id-tpm {
+			label = "LED_ID_TPM";
+			gpios = <&smb_pex_vr_ctrl 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-bat {
+			label = "LED_ID_BAT";
+			gpios = <&smb_pex_vr_ctrl 16 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-mgmt-port2 {
+			label = "LED_ID_MGMT_PORT2";
+			gpios = <&smb_pex_vr_ctrl 17 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-mgmt-port1 {
+			label = "LED_ID_MGMT_PORT1";
+			gpios = <&smb_pex_vr_ctrl 18 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic1-port1 {
+			label = "LED_ID_NIC1_PORT1";
+			gpios = <&smb_pex_vr_ctrl 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic1-port2 {
+			label = "LED_ID_NIC1_PORT2";
+			gpios = <&smb_pex_vr_ctrl 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic2-port1 {
+			label = "LED_ID_NIC2_PORT1";
+			gpios = <&smb_pex_vr_ctrl 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic2-port2 {
+			label = "LED_ID_NIC2_PORT2";
+			gpios = <&smb_pex_vr_ctrl 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-m2-ssd2 {
+			label = "LED_ID_M2_SSD2";
+			gpios = <&smb_pex_vr_ctrl 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-m2-ssd1 {
+			label = "LED_ID_M2_SSD1";
+			gpios = <&smb_pex_vr_ctrl 37 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dwr-frnt-p {
+			label = "LED_ID_DWR_FRNT_P";
+			gpios = <&smb_svc_pex_cpu3_led 37 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_BLUE>;
+
+			default-state = "on";
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-pwr-dwr-frnt {
+			label = "LED_PWR_DWR_FRNT";
+			gpios = <&smb_svc_pex_cpu3_led 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-pwr-dwr-back {
+			label = "LED_PWR_DWR_BACK";
+			gpios = <&smb_pex_vr_ctrl 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-id-dwr-back-p {
+			label = "LED_ID_DWR_BACK_P";
+			gpios = <&smb_pex_vr_ctrl 35 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_BLUE>;
+
+			default-state = "on";
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-id-cpu0 {
+			label = "LED_ID_CPU0";
+			gpios = <&smb_svc_pex_cpu0_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-cpu1 {
+			label = "LED_ID_CPU1";
+			gpios = <&smb_svc_pex_cpu1_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-cpu2 {
+			label = "LED_ID_CPU2";
+			gpios = <&smb_svc_pex_cpu2_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-cpu3 {
+			label = "LED_ID_CPU3";
+			gpios = <&smb_svc_pex_cpu3_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0e2 {
+			label = "LED_ID_DIMM_C0E2";
+			gpios = <&smb_svc_pex_cpu0_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0e1 {
+			label = "LED_ID_DIMM_C0E1";
+			gpios = <&smb_svc_pex_cpu0_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0f2 {
+			label = "LED_ID_DIMM_C0F2";
+			gpios = <&smb_svc_pex_cpu0_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0f1 {
+			label = "LED_ID_DIMM_C0F1";
+			gpios = <&smb_svc_pex_cpu0_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0g2 {
+			label = "LED_ID_DIMM_C0G2";
+			gpios = <&smb_svc_pex_cpu0_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0g1 {
+			label = "LED_ID_DIMM_C0G1";
+			gpios = <&smb_svc_pex_cpu0_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0h2 {
+			label = "LED_ID_DIMM_C0H2";
+			gpios = <&smb_svc_pex_cpu0_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0h1 {
+			label = "LED_ID_DIMM_C0H1";
+			gpios = <&smb_svc_pex_cpu0_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0a2 {
+			label = "LED_ID_DIMM_C0A2";
+			gpios = <&smb_svc_pex_cpu0_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0a1 {
+			label = "LED_ID_DIMM_C0A1";
+			gpios = <&smb_svc_pex_cpu0_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0b2 {
+			label = "LED_ID_DIMM_C0B2";
+			gpios = <&smb_svc_pex_cpu0_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0b1 {
+			label = "LED_ID_DIMM_C0B1";
+			gpios = <&smb_svc_pex_cpu0_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0c2 {
+			label = "LED_ID_DIMM_C0C2";
+			gpios = <&smb_svc_pex_cpu0_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0c1 {
+			label = "LED_ID_DIMM_C0C1";
+			gpios = <&smb_svc_pex_cpu0_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0d2 {
+			label = "LED_ID_DIMM_C0D2";
+			gpios = <&smb_svc_pex_cpu0_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0d1 {
+			label = "LED_ID_DIMM_C0D1";
+			gpios = <&smb_svc_pex_cpu0_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1e2 {
+			label = "LED_ID_DIMM_C1E2";
+			gpios = <&smb_svc_pex_cpu1_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1e1 {
+			label = "LED_ID_DIMM_C1E1";
+			gpios = <&smb_svc_pex_cpu1_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1f2 {
+			label = "LED_ID_DIMM_C1F2";
+			gpios = <&smb_svc_pex_cpu1_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1f1 {
+			label = "LED_ID_DIMM_C1F1";
+			gpios = <&smb_svc_pex_cpu1_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1g2 {
+			label = "LED_ID_DIMM_C1G2";
+			gpios = <&smb_svc_pex_cpu1_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1g1 {
+			label = "LED_ID_DIMM_C1G1";
+			gpios = <&smb_svc_pex_cpu1_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1h2 {
+			label = "LED_ID_DIMM_C1H2";
+			gpios = <&smb_svc_pex_cpu1_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1h1 {
+			label = "LED_ID_DIMM_C1H1";
+			gpios = <&smb_svc_pex_cpu1_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1a2 {
+			label = "LED_ID_DIMM_C1A2";
+			gpios = <&smb_svc_pex_cpu1_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1a1 {
+			label = "LED_ID_DIMM_C1A1";
+			gpios = <&smb_svc_pex_cpu1_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1b2 {
+			label = "LED_ID_DIMM_C1B2";
+			gpios = <&smb_svc_pex_cpu1_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1b1 {
+			label = "LED_ID_DIMM_C1B1";
+			gpios = <&smb_svc_pex_cpu1_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1c2 {
+			label = "LED_ID_DIMM_C1C2";
+			gpios = <&smb_svc_pex_cpu1_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1c1 {
+			label = "LED_ID_DIMM_C1C1";
+			gpios = <&smb_svc_pex_cpu1_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1d2 {
+			label = "LED_ID_DIMM_C1D2";
+			gpios = <&smb_svc_pex_cpu1_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1d1 {
+			label = "LED_ID_DIMM_C1D1";
+			gpios = <&smb_svc_pex_cpu1_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2e2 {
+			label = "LED_ID_DIMM_C2E2";
+			gpios = <&smb_svc_pex_cpu2_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2e1 {
+			label = "LED_ID_DIMM_C2E1";
+			gpios = <&smb_svc_pex_cpu2_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2f2 {
+			label = "LED_ID_DIMM_C2F2";
+			gpios = <&smb_svc_pex_cpu2_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2f1 {
+			label = "LED_ID_DIMM_C2F1";
+			gpios = <&smb_svc_pex_cpu2_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2g2 {
+			label = "LED_ID_DIMM_C2G2";
+			gpios = <&smb_svc_pex_cpu2_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2g1 {
+			label = "LED_ID_DIMM_C2G1";
+			gpios = <&smb_svc_pex_cpu2_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2h2 {
+			label = "LED_ID_DIMM_C2H2";
+			gpios = <&smb_svc_pex_cpu2_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2h1 {
+			label = "LED_ID_DIMM_C2H1";
+			gpios = <&smb_svc_pex_cpu2_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2a2 {
+			label = "LED_ID_DIMM_C2A2";
+			gpios = <&smb_svc_pex_cpu2_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2a1 {
+			label = "LED_ID_DIMM_C2A1";
+			gpios = <&smb_svc_pex_cpu2_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2b2 {
+			label = "LED_ID_DIMM_C2B2";
+			gpios = <&smb_svc_pex_cpu2_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2b1 {
+			label = "LED_ID_DIMM_C2B1";
+			gpios = <&smb_svc_pex_cpu2_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2c2 {
+			label = "LED_ID_DIMM_C2C2";
+			gpios = <&smb_svc_pex_cpu2_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2c1 {
+			label = "LED_ID_DIMM_C2C1";
+			gpios = <&smb_svc_pex_cpu2_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2d2 {
+			label = "LED_ID_DIMM_C2D2";
+			gpios = <&smb_svc_pex_cpu2_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2d1 {
+			label = "LED_ID_DIMM_C2D1";
+			gpios = <&smb_svc_pex_cpu2_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3e2 {
+			label = "LED_ID_DIMM_C3E2";
+			gpios = <&smb_svc_pex_cpu3_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3e1 {
+			label = "LED_ID_DIMM_C3E1";
+			gpios = <&smb_svc_pex_cpu3_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3f2 {
+			label = "LED_ID_DIMM_C3F2";
+			gpios = <&smb_svc_pex_cpu3_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3f1 {
+			label = "LED_ID_DIMM_C3F1";
+			gpios = <&smb_svc_pex_cpu3_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3g2 {
+			label = "LED_ID_DIMM_C3G2";
+			gpios = <&smb_svc_pex_cpu3_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3g1 {
+			label = "LED_ID_DIMM_C3G1";
+			gpios = <&smb_svc_pex_cpu3_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3h2 {
+			label = "LED_ID_DIMM_C3H2";
+			gpios = <&smb_svc_pex_cpu3_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3h1 {
+			label = "LED_ID_DIMM_C3H1";
+			gpios = <&smb_svc_pex_cpu3_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3a2 {
+			label = "LED_ID_DIMM_C3A2";
+			gpios = <&smb_svc_pex_cpu3_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3a1 {
+			label = "LED_ID_DIMM_C3A1";
+			gpios = <&smb_svc_pex_cpu3_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3b2 {
+			label = "LED_ID_DIMM_C3B2";
+			gpios = <&smb_svc_pex_cpu3_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3b1 {
+			label = "LED_ID_DIMM_C3B1";
+			gpios = <&smb_svc_pex_cpu3_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3c2 {
+			label = "LED_ID_DIMM_C3C2";
+			gpios = <&smb_svc_pex_cpu3_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3c1 {
+			label = "LED_ID_DIMM_C3C1";
+			gpios = <&smb_svc_pex_cpu3_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3d2 {
+			label = "LED_ID_DIMM_C3D2";
+			gpios = <&smb_svc_pex_cpu3_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3d1 {
+			label = "LED_ID_DIMM_C3D1";
+			gpios = <&smb_svc_pex_cpu3_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd01 {
+			label = "LED_ID_RSSD01";
+			gpios = <&smb_svc_pex_rssd01_16 0 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd02 {
+			label = "LED_ID_RSSD02";
+			gpios = <&smb_svc_pex_rssd01_16 1 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd03 {
+			label = "LED_ID_RSSD03";
+			gpios = <&smb_svc_pex_rssd01_16 2 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd04 {
+			label = "LED_ID_RSSD04";
+			gpios = <&smb_svc_pex_rssd01_16 3 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd05 {
+			label = "LED_ID_RSSD05";
+			gpios = <&smb_svc_pex_rssd01_16 4 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd06 {
+			label = "LED_ID_RSSD06";
+			gpios = <&smb_svc_pex_rssd01_16 5 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd07 {
+			label = "LED_ID_RSSD07";
+			gpios = <&smb_svc_pex_rssd01_16 6 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd08 {
+			label = "LED_ID_RSSD08";
+			gpios = <&smb_svc_pex_rssd01_16 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd09 {
+			label = "LED_ID_RSSD09";
+			gpios = <&smb_svc_pex_rssd01_16 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd10 {
+			label = "LED_ID_RSSD10";
+			gpios = <&smb_svc_pex_rssd01_16 9 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd11 {
+			label = "LED_ID_RSSD11";
+			gpios = <&smb_svc_pex_rssd01_16 10 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd12 {
+			label = "LED_ID_RSSD12";
+			gpios = <&smb_svc_pex_rssd01_16 11 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd13 {
+			label = "LED_ID_RSSD13";
+			gpios = <&smb_svc_pex_rssd01_16 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd14 {
+			label = "LED_ID_RSSD14";
+			gpios = <&smb_svc_pex_rssd01_16 13 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd15 {
+			label = "LED_ID_RSSD15";
+			gpios = <&smb_svc_pex_rssd01_16 14 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd16 {
+			label = "LED_ID_RSSD16";
+			gpios = <&smb_svc_pex_rssd01_16 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd17 {
+			label = "LED_ID_RSSD17";
+			gpios = <&smb_svc_pex_rssd17_32 0 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd18 {
+			label = "LED_ID_RSSD18";
+			gpios = <&smb_svc_pex_rssd17_32 1 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd19 {
+			label = "LED_ID_RSSD19";
+			gpios = <&smb_svc_pex_rssd17_32 2 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd20 {
+			label = "LED_ID_RSSD20";
+			gpios = <&smb_svc_pex_rssd17_32 3 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd21 {
+			label = "LED_ID_RSSD21";
+			gpios = <&smb_svc_pex_rssd17_32 4 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd22 {
+			label = "LED_ID_RSSD22";
+			gpios = <&smb_svc_pex_rssd17_32 5 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd23 {
+			label = "LED_ID_RSSD23";
+			gpios = <&smb_svc_pex_rssd17_32 6 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd24 {
+			label = "LED_ID_RSSD24";
+			gpios = <&smb_svc_pex_rssd17_32 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd25 {
+			label = "LED_ID_RSSD25";
+			gpios = <&smb_svc_pex_rssd17_32 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd26 {
+			label = "LED_ID_RSSD26";
+			gpios = <&smb_svc_pex_rssd17_32 9 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd27 {
+			label = "LED_ID_RSSD27";
+			gpios = <&smb_svc_pex_rssd17_32 10 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd28 {
+			label = "LED_ID_RSSD28";
+			gpios = <&smb_svc_pex_rssd17_32 11 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd29 {
+			label = "LED_ID_RSSD29";
+			gpios = <&smb_svc_pex_rssd17_32 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd30 {
+			label = "LED_ID_RSSD30";
+			gpios = <&smb_svc_pex_rssd17_32 13 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd31 {
+			label = "LED_ID_RSSD31";
+			gpios = <&smb_svc_pex_rssd17_32 14 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd32 {
+			label = "LED_ID_RSSD32";
+			gpios = <&smb_svc_pex_rssd17_32 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm01 {
+			label = "LED_ID_FAN_ASM01";
+			gpios = <&smb_svc_pex_rssd01_16 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm02 {
+			label = "LED_ID_FAN_ASM02";
+			gpios = <&smb_svc_pex_rssd01_16 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm03 {
+			label = "LED_ID_FAN_ASM03";
+			gpios = <&smb_svc_pex_rssd01_16 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm04 {
+			label = "LED_ID_FAN_ASM04";
+			gpios = <&smb_svc_pex_rssd01_16 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm05 {
+			label = "LED_ID_FAN_ASM05";
+			gpios = <&smb_svc_pex_rssd01_16 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm06 {
+			label = "LED_ID_FAN_ASM06";
+			gpios = <&smb_svc_pex_rssd01_16 37 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm07 {
+			label = "LED_ID_FAN_ASM07";
+			gpios = <&smb_svc_pex_rssd17_32 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm08 {
+			label = "LED_ID_FAN_ASM08";
+			gpios = <&smb_svc_pex_rssd17_32 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm09 {
+			label = "LED_ID_FAN_ASM09";
+			gpios = <&smb_svc_pex_rssd17_32 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm10 {
+			label = "LED_ID_FAN_ASM10";
+			gpios = <&smb_svc_pex_rssd17_32 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm11 {
+			label = "LED_ID_FAN_ASM11";
+			gpios = <&smb_svc_pex_rssd17_32 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm12 {
+			label = "LED_ID_FAN_ASM12";
+			gpios = <&smb_svc_pex_rssd17_32 37 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>, <&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>,
+			<&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>, <&adc1 4>, <&adc0 2>, <&adc1 0>,
+			<&p2V5_aux_vd 0>, <&p3v3_rtc_vd 0>;
+	};
+
+	p12v_vd: voltage-divider1 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1127/127 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <15>;
+		full-ohms = <133>;
+	};
+
+	p5v_aux_vd: voltage-divider2 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 5>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p5v_bmc_aux_vd: voltage-divider3 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p3v3_aux_vd: voltage-divider4 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 2>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p3v3_bmc_aux_vd: voltage-divider5 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 7>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p1v8_bmc_aux_vd: voltage-divider6 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 6>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 4000/3000 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <3>;
+		full-ohms = <4>;
+	};
+
+	p2V5_aux_vd: voltage-divider7 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 1>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 2100/1100 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <11>;
+		full-ohms = <21>;
+	};
+
+	p3v3_rtc_vd: voltage-divider8 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 7>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 231000/100000 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <100>;
+		full-ohms = <231>;
+	};
+
+	thermistor0: thermistor-0 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor1: thermistor-1 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 1>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor2: thermistor-2 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 4>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor3: thermistor-3 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 5>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	p12v: fixedregulator-p12v {
+		compatible = "regulator-fixed";
+		regulator-name = "p12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	p3v3_bmc_aux: fixedregulator-p3v3-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_bmc_aux";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	p1v2_bmc_aux: fixedregulator-p1v2-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v2_bmc_aux";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	p12v-a-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_a>;
+	};
+
+	p12v-b-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_b>;
+	};
+
+	p12v-c-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_c>;
+	};
+
+	p12v-d-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_d>;
+	};
+
+	pvccinfaon-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu0>;
+	};
+
+	pvccfa-ehv-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu0>;
+	};
+
+	pvnn-main-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu0>;
+	};
+
+	pvccin-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu0>;
+	};
+
+	pvccfa-ehv-fivra-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu0>;
+	};
+
+	pvccd-hv-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu0>;
+	};
+
+	pvpp-hbm-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu0>;
+	};
+
+	pvccinfaon-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu1>;
+	};
+
+	pvccfa-ehv-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu1>;
+	};
+
+	pvnn-main-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu1>;
+	};
+
+	pvccin-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu1>;
+	};
+
+	pvccfa-ehv-fivra-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu1>;
+	};
+
+	pvccd-hv-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu1>;
+	};
+
+	pvpp-hbm-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu1>;
+	};
+
+	pvccinfaon-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu2>;
+	};
+
+	pvccfa-ehv-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu2>;
+	};
+
+	pvnn-main-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu2>;
+	};
+
+	pvccin-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu2>;
+	};
+
+	pvccfa-ehv-fivra-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu2>;
+	};
+
+	pvccd-hv-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu2>;
+	};
+
+	pvpp-hbm-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu2>;
+	};
+
+	pvccinfaon-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu3>;
+	};
+
+	pvccfa-ehv-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu3>;
+	};
+
+	pvnn-main-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu3>;
+	};
+
+	pvccin-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu3>;
+	};
+
+	pvccfa-ehv-fivra-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu3>;
+	};
+
+	pvccd-hv-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu3>;
+	};
+
+	pvpp-hbm-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu3>;
+	};
+
+	p1v05-pch-aux-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v05_pch_aux>;
+	};
+
+	p1v8-pch-aux-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v8_pch_aux>;
+	};
+
+	p3v3-pch-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p3v3_pch>;
+	};
+
+	p5v-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p5v>;
+	};
+
+	smb-m2-ssb-ssd2 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_smb_m2_ssb_ssd2>;
+	};
+
+	smb-m2-ssb-ssd1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_smb_m2_ssb_ssd1>;
+	};
+
+	ssb-rssd01-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd01>;
+	};
+
+	ssb-rssd01-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd01>;
+	};
+
+	ssb-rssd02-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd02>;
+	};
+
+	ssb-rssd02-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd02>;
+	};
+
+	ssb-rssd03-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd03>;
+	};
+
+	ssb-rssd03-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd03>;
+	};
+
+	ssb-rssd04-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd04>;
+	};
+
+	ssb-rssd04-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd04>;
+	};
+
+	ssb-rssd05-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd05>;
+	};
+
+	ssb-rssd05-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd05>;
+	};
+
+	ssb-rssd06-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd06>;
+	};
+
+	ssb-rssd06-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd06>;
+	};
+
+	ssb-rssd07-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd07>;
+	};
+
+	ssb-rssd07-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd07>;
+	};
+
+	ssb-rssd08-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd08>;
+	};
+
+	ssb-rssd08-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd08>;
+	};
+
+	ssb-rssd09-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd09>;
+	};
+
+	ssb-rssd09-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd09>;
+	};
+
+	ssb-rssd10-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd10>;
+	};
+
+	ssb-rssd10-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd10>;
+	};
+
+	ssb-rssd11-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd11>;
+	};
+
+	ssb-rssd11-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd11>;
+	};
+
+	ssb-rssd12-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd12>;
+	};
+
+	ssb-rssd12-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd12>;
+	};
+
+	ssb-rssd13-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd13>;
+	};
+
+	ssb-rssd13-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd13>;
+	};
+
+	ssb-rssd14-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd14>;
+	};
+
+	ssb-rssd14-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd14>;
+	};
+
+	ssb-rssd15-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd15>;
+	};
+
+	ssb-rssd15-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd15>;
+	};
+
+	ssb-rssd16-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd16>;
+	};
+
+	ssb-rssd16-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd16>;
+	};
+
+	ssb-rssd17-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd17>;
+	};
+
+	ssb-rssd17-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd17>;
+	};
+
+	ssb-rssd18-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd18>;
+	};
+
+	ssb-rssd18-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd18>;
+	};
+
+	ssb-rssd19-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd19>;
+	};
+
+	ssb-rssd19-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd19>;
+	};
+
+	ssb-rssd20-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd20>;
+	};
+
+	ssb-rssd20-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd20>;
+	};
+
+	ssb-rssd21-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd21>;
+	};
+
+	ssb-rssd21-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd21>;
+	};
+
+	ssb-rssd22-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd22>;
+	};
+
+	ssb-rssd22-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd22>;
+	};
+
+	ssb-rssd23-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd23>;
+	};
+
+	ssb-rssd23-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd23>;
+	};
+
+	ssb-rssd24-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd24>;
+	};
+
+	ssb-rssd24-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd24>;
+	};
+
+	ssb-rssd25-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd25>;
+	};
+
+	ssb-rssd25-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd25>;
+	};
+
+	ssb-rssd26-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd26>;
+	};
+
+	ssb-rssd26-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd26>;
+	};
+
+	ssb-rssd27-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd27>;
+	};
+
+	ssb-rssd27-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd27>;
+	};
+
+	ssb-rssd28-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd28>;
+	};
+
+	ssb-rssd28-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd28>;
+	};
+
+	ssb-rssd29-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd29>;
+	};
+
+	ssb-rssd29-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd29>;
+	};
+
+	ssb-rssd30-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd30>;
+	};
+
+	ssb-rssd30-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd30>;
+	};
+
+	ssb-rssd31-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd31>;
+	};
+
+	ssb-rssd31-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd31>;
+	};
+
+	ssb-rssd32-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd32>;
+	};
+
+	ssb-rssd32-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd32>;
+	};
+
+	p3v3-nic-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p3v3_nic>;
+	};
+
+	p1v8-nic-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v8_nic>;
+	};
+
+	p1v2-nic-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v2_nic>;
+	};
+
+	pvcore-nic1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvcore_nic1>;
+	};
+
+	pvcore-nic2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvcore_nic2>;
+	};
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default>;
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		reset-gpios = <&gpio0 ASPEED_GPIO(V, 7) GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <300>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		reset-gpios = <&gpio0 ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <300>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		     &pinctrl_adc1_default
+		     &pinctrl_adc2_default
+		     &pinctrl_adc3_default
+		     &pinctrl_adc4_default
+		     &pinctrl_adc5_default
+		     &pinctrl_adc6_default
+		     &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+	aspeed,battery-sensing;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default
+		     &pinctrl_adc9_default
+		     &pinctrl_adc10_default
+		     &pinctrl_adc11_default
+		     &pinctrl_adc12_default
+		     &pinctrl_adc13_default
+		     &pinctrl_adc15_default>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&gpio0 {
+	status = "okay";
+	gpio-line-names =
+	/* A0 - A7 */
+	"", "", "", "", "", "", "", "",
+	/* B0 - B7 */
+	"", "", "FM_ADR_TRIGGER_R_N", "RST_PLTRST_BUF_N", "BMC_TPM_RESET_N", "BMC_TPM_IRQ_N",
+	"PCH_TPM_RESET_N", "PCH_TPM_IRQ_N",
+	/* C0 - C7 */
+	"", "", "", "", "", "", "", "",
+	/* D0 - D7 */
+	"", "", "", "", "", "", "", "",
+	/* E0 - E7 */
+	"", "", "", "", "", "", "", "",
+	/* F0 - F7 */
+	"", "", "", "BMC_MUX_CPU1_RST_INT_N", "BMC_MUX_CPU2_RST_INT_N", "", "", "",
+	/* G0 - G7 */
+	"FM_SSD_CLK_DRVR1_EN", "FM_CK440Q_DEV_EN", "BMC_MAC1_RESET_N", "FM_DB2000_DEV_EN",
+	"FM_CPU_RMCA_LVT3_N", "FM_CPU_CATERR_LVT3_N", "FM_DBP_PRESENT_N", "",
+	/* H0 - H7 */
+	"SMB_SVC_PEX_RSSD17_32_INT", "LED_BMC_RDY", "RST_DBP_N", "", "", "", "", "",
+	/* I0 - I7 */
+	"JTAG_MUX_MODE_SEL", "JTAG_MUX_TRANS_ENBL", "JTAG_MUX_LSP_SEL5", "JTAG_MUX_MSTR_SEL",
+	"JTAG_MUX_LSP_SEL3", "", "JTAG_MUX_ENBL_N", "JTAG_MUX_RST_N",
+	/* J0 - J7 */
+	"", "", "", "", "", "", "", "",
+	/* K0 - K7 */
+	"", "", "", "", "", "", "", "",
+	/* L0 - L7 */
+	"", "", "", "", "RST_RTCRST_N", "RST_SRTCRST_N", "", "",
+	/* M0 - M7 */
+	"BMC_UART1_CTS_N", "BMC_UART1_DCD_N", "BMC_UART1_DSR_N", "BMC_UART1_RI_N",
+	"BMC_UART1_DTR_N", "BMC_UART1_RTS_N", "", "",
+	/* N0 - N7 */
+	"IRQ_BMC_PCH_NMI", "", "FM_PCH_BMC_THERMTRIP_N", "FM_BIOS_POST_CMPLT_N", "RST_PLTRST_N",
+	"FM_FLASH_SEC_OVRD", "FM_SMI_ACTIVE_N", "PWRGD_DBP",
+	/* O0 - O7 */
+	"CATERR_CPU2_EN", "H_LVT1_THERMTRIP_N", "CATERR_CPU3_EN", "SMB_SVC_PEX_CPU0_LED_INT",
+	"H_LVT1_MEMTRIP_N", "", "CATERR_CPU1_EN", "FM_PCH_ADR_COMPLETE_N",
+	/* P0 - P7 */
+	"PWRGD_SYS_PWROK", "PWRGD_PCH_PWROK", "BMC_MUX_CPU3_RST_INT_N", "BMC_MUX_SVC_RSSD_INT",
+	"FM_SLPS4_N", "IRQ_SML0_ALERT_N", "FM_SLPS3_N", "LED_BMC_HB",
+	/* Q0 - Q7 */
+	"", "PEX_BMC_RST", "PEX_VR_CTRL_RST", "PEX_NIC_RST", "PEX_CPU0_LED_RST", "PEX_CPU1_LED_RST",
+	"PEX_CPU2_LED_RST", "PEX_CPU3_LED_RST",
+	/* R0 - R7 */
+	"BMC_MUX_FANSSB_RSSD17_32_RST_INT_N", "BMC_MUX_FANPWM_RSSD01_16_RST_INT_N",
+	"BMC_MUX_SVC_VR_RST_INT_N", "BMC_MUX_NIC_RST_INT_N", "BMC_MUX_SVC_EXP_RST_INT_N",
+	"FM_CPU_ERR2_LVT3_N", "BMC_MUX_CPU0_RST_INT_N", "BMC_MUX_M2_RST_INT_N",
+	/* S0 - S7 */
+	"SMB_SVC_PEX_RSSD01_16_INT", "RST_PCH_RSMRST_R_N", "", "", "BMC_ROT_FPGA_RESET_N",
+	"FM_SSD_CLK_DRVR0_EN", "", "",
+	/* T0 - T7 */
+	"", "", "", "", "", "", "", "",
+	/* U0 - U7 */
+	"", "", "", "", "", "", "", "",
+	/* V0 - V7 */
+	"BMC_PEX_IRQ_INT", "RTC_BATT_TEST", "SMB_PEX_VR_CTRL_INT", "SMB_SVC_PEX_CPU3_LED_INT",
+	"PWRGD_CPUPWRGD", "SMB_SVC_PEX_CPU2_LED_INT", "SMB_SVC_PEX_CPU1_LED_INT",
+	"BMC_MAC0_RESET_N",
+	/* W0 - W7 */
+	"", "", "", "", "", "", "", "",
+	/* X0 - X7 */
+	"", "", "", "", "", "", "", "",
+	/* Y0 - Y7 */
+	"FM_THROTTLE_N", "FM_PASSWORD_CLEAR_N", "H_LVT3_CATERR_DLY_N", "FM_CPU_OL_INT_R_N", "", "",
+	"", "",
+	/* Z0 - Z7 */
+	"FM_CPU_ERR0_LVT3_N", "FM_CPU_ERR1_LVT3_N", "BMC_MUX_VR_PCH_CPU_RST_INT_N",
+	"JTAG_MUX_LSP_SEL1", "", "JTAG_MUX_LSP_SEL4", "JTAG_MUX_LSP_SEL2", "";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_unbiased_default>;
+};
+
+&pinctrl {
+	pinctrl_gpio0_unbiased_default: gpio_default {
+		pins = "AB15", "AD14", "R23", "A18", "AD24", "AD15", "AE14", "AC15", "U25", "AA24",
+		       "V24", "W26", "AA23", "V26", "U24", "V25", "AE15", "C15", "F15";
+		bias-disable;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	bmc_mux_nic: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_nic: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&gpio0 ASPEED_GPIO(Q, 3) GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <19 1>, <22 6>, <30 6>, <38 2>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"IRQ_NIC2_OVT_WRNG", "FM_NIC2_ALLSTANDBY_N", "IRQ_NIC2_OVT_SHTDN",
+				"SMB_VR_PVCORE_NIC2_ALERT_N", "FM_NIC2_PERST1_N",
+				"SMB_NIC2_ALERT_N", "FM_NIC2_PERST3_N", "FM_NIC2_PERST2_N",
+				/* GPORT1 */
+				"FM_NIC1_RST_N", "FM_NIC1_PERST0_N", "FM_NIC1_PERST2_N",
+				"FM_NIC1_PERST3_N", "SMB_NIC1_ALERT_N", "FM_NIC1_PERST1_N",
+				"SMB_VR_PVCORE_NIC1_ALERT_N", "IRQ_NIC1_OVT_SHTDN",
+				/* GPORT2 */
+				"SMB_VR_P3V3_NIC_ALERT_N", "FM_NIC2_FLASH_PRSNT",
+				"FM_NIC1_FLASH_PRSNT", "",
+				/* GPORT3 */
+				"FM_NIC2_PERST0_N", "FM_NIC2_RST_N", "", "", "", "", "", "",
+				/* GPORT4 */
+				"FM_NIC1_ALLSTANDBY_N", "IRQ_NIC1_OVT_WRNG", "", "", "", "", "", "",
+				/* GPORT5 */
+				"SMB_VR_P1V8_NIC_ALERT_N", "SMB_VR_P1V2_NIC_ALERT_N", "", "";
+
+				pinctrl-0 = <&U62160_pins>;
+				pinctrl-names = "default";
+				U62160_pins: cfg-pins {
+					pins = "gp03", "gp16", "gp20", "gp50", "gp51";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvcore_nic2: ir38263-pvcore-nic2@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "pvcore_nic2";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvcore_nic1: ir38263-pvcore-nic1@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "pvcore_nic1";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p3v3_nic: ir38263-p3v3-nic@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p3v3_nic";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v2_nic: ir38263-p1v2-nic@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p1v2_nic";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v8_nic: ir38263-p1v8-nic@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p1v8_nic";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2cmux1: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 7) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_m2_ssb_ssd1: regulator@3a {
+				compatible = "maxim,max5978";
+				reg = <0x3a>;
+				vss1-supply = <&p3v3_aux>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						label = "m2_ssb_ssd1:green:power";
+						default-state = "off";
+					};
+				};
+
+				regulators {
+					sw0_smb_m2_ssb_ssd1: sw0 {
+						shunt-resistor-micro-ohms = <12000>;
+						regulator-over-current-protection;
+						regulator-oc-protection-microamp = <2800000>;
+						regulator-name = "p3v3_m2_ssd1";
+						regulator-enable-ramp-delay = <10000>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_m2_ssb_ssd2: regulator@3a {
+				compatible = "maxim,max5978";
+				reg = <0x3a>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <39 IRQ_TYPE_LEVEL_LOW>;
+				vss1-supply = <&p3v3_aux>;
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						label = "m2_ssb_ssd2:green:power";
+						default-state = "off";
+					};
+				};
+
+				regulators {
+					sw0_smb_m2_ssb_ssd2: sw0 {
+						shunt-resistor-micro-ohms = <12000>;
+						regulator-over-current-protection;
+						regulator-oc-protection-microamp = <2800000>;
+						regulator-name = "p3v3_m2_ssd2";
+						regulator-enable-ramp-delay = <10000>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+
+	bmc-slave@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2cmux2: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(Z, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v05_pch_aux: ir38263-p1v05-pch-aux@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p1v05_pch_aux";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v8_pch_aux: ir38060-p1v8-pch-aux@40 {
+				compatible = "infineon,ir38060";
+				reg = <0x40>;
+
+				regulator-name = "p1v8_pch_aux";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	i2cmux13: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 6) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu0_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu0_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU0", "PWRGD_CHC_CPU0",
+				"PWRGD_CHB_CPU0", "PWRGD_CHA_CPU0",
+				"PWRGD_CHE_CPU0", "PWRGD_CHF_CPU0",
+				"PWRGD_CHG_CPU0", "PWRGD_CHH_CPU0",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU0_ALERT_N", "SMB_VR_PVCCINFAON_CPU0_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU0_ALERT_N", "SMB_VR_PVCCD_HV_CPU0_ALERT_N",
+				"SMB_VR_PVCCIN_CPU0_ALERT_N", "SEL_SMB_DIMM_CPU0",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU0_AB_DRAM_G", "PWRGD_LVC3_CPU0_CD_DRAM_G",
+				"PWRGD_LVC3_CPU0_EF_DRAM_G", "PWRGD_LVC3_CPU0_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU0_DISABLE_COD_N", "",
+				"RST_LVC3_CPU0_RESET_N", "PWRGD_LVC3_CPU0_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU0_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU0_PROCHOT_N", "H_LVT3_CPU0_MEMHOT_IN_N",
+				"H_LVT3_CPU0_MEMHOT_OUT_N", "H_LVT3_CPU0_MEMTRIP_OUT_N",
+				"H_LVT3_CPU0_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU0_NMI", "FM_S3M_CPU0_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU0_PKG_ID0", "FM_CPU0_PKG_ID1",
+				"FM_CPU0_PROC_ID0", "FM_CPU0_PROC_ID1";
+
+				pinctrl-0 = <&U62080_pins>;
+				pinctrl-names = "default";
+				U62080_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu0@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu0: vout0 {
+						regulator-name = "pvccinfaon_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu0: vout1 {
+						regulator-name = "pvccfa_ehv_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu0@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu0: vout {
+						regulator-name = "pvnn_main_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu0@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu0: vout0 {
+						regulator-name = "pvccin_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu0: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu0@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu0: vout {
+						regulator-name = "pvccd_hv_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu0@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu0: vout {
+						regulator-name = "pvpp_hbm_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2cmux4: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(F, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu1_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu1_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU1", "PWRGD_CHC_CPU1",
+				"PWRGD_CHB_CPU1", "PWRGD_CHA_CPU1",
+				"PWRGD_CHE_CPU1", "PWRGD_CHF_CPU1",
+				"PWRGD_CHG_CPU1", "PWRGD_CHH_CPU1",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU1_ALERT_N", "SMB_VR_PVCCINFAON_CPU1_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU1_ALERT_N", "SMB_VR_PVCCD_HV_CPU1_ALERT_N",
+				"SMB_VR_PVCCIN_CPU1_ALERT_N", "SEL_SMB_DIMM_CPU1",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU1_AB_DRAM_G", "PWRGD_LVC3_CPU1_CD_DRAM_G",
+				"PWRGD_LVC3_CPU1_EF_DRAM_G", "PWRGD_LVC3_CPU1_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU1_DISABLE_COD_N", "",
+				"RST_LVC3_CPU1_RESET_N", "PWRGD_LVC3_CPU1_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU1_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU1_PROCHOT_N", "H_LVT3_CPU1_MEMHOT_IN_N",
+				"H_LVT3_CPU1_MEMHOT_OUT_N", "H_LVT3_CPU1_MEMTRIP_OUT_N",
+				"H_LVT3_CPU1_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU1_NMI", "FM_S3M_CPU1_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU1_PKG_ID0", "FM_CPU1_PKG_ID1",
+				"FM_CPU1_PROC_ID0", "FM_CPU1_PROC_ID1";
+
+				pinctrl-0 = <&U62090_pins>;
+				pinctrl-names = "default";
+				U62090_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu1@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu1: vout0 {
+						regulator-name = "pvccinfaon_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu1: vout1 {
+						regulator-name = "pvccfa_ehv_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu1@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu1: vout {
+						regulator-name = "pvnn_main_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu1@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu1: vout0 {
+						regulator-name = "pvccin_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu1: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu1@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu1: vout {
+						regulator-name = "pvccd_hv_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu1@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu1: vout {
+						regulator-name = "pvpp_hbm_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2cmux3: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu2_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu2_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU2", "PWRGD_CHC_CPU2",
+				"PWRGD_CHB_CPU2", "PWRGD_CHA_CPU2",
+				"PWRGD_CHE_CPU2", "PWRGD_CHF_CPU2",
+				"PWRGD_CHG_CPU2", "PWRGD_CHH_CPU2",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU2_ALERT_N", "SMB_VR_PVCCINFAON_CPU2_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU2_ALERT_N", "SMB_VR_PVCCD_HV_CPU2_ALERT_N",
+				"SMB_VR_PVCCIN_CPU2_ALERT_N", "SEL_SMB_DIMM_CPU2",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU2_AB_DRAM_G", "PWRGD_LVC3_CPU2_CD_DRAM_G",
+				"PWRGD_LVC3_CPU2_EF_DRAM_G", "PWRGD_LVC3_CPU2_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU2_DISABLE_COD_N", "",
+				"RST_LVC3_CPU2_RESET_N", "PWRGD_LVC3_CPU2_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU2_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU2_PROCHOT_N", "H_LVT3_CPU2_MEMHOT_IN_N",
+				"H_LVT3_CPU2_MEMHOT_OUT_N", "H_LVT3_CPU2_MEMTRIP_OUT_N",
+				"H_LVT3_CPU2_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU2_NMI", "FM_S3M_CPU2_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU2_PKG_ID0", "FM_CPU2_PKG_ID1",
+				"FM_CPU2_PROC_ID0", "FM_CPU2_PROC_ID1";
+
+				pinctrl-0 = <&U62100_pins>;
+				pinctrl-names = "default";
+				U62100_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu2@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu2: vout0 {
+						regulator-name = "pvccinfaon_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu2: vout1 {
+						regulator-name = "pvccfa_ehv_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu2@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu2: vout {
+						regulator-name = "pvnn_main_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu2@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu2: vout0 {
+						regulator-name = "pvccin_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu2: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu2@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu2: vout {
+						regulator-name = "pvccd_hv_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu2@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu2: vout {
+						regulator-name = "pvpp_hbm_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	i2cmux22: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(P, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu3_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu3_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU3", "PWRGD_CHC_CPU3",
+				"PWRGD_CHB_CPU3", "PWRGD_CHA_CPU3",
+				"PWRGD_CHE_CPU3", "PWRGD_CHF_CPU3",
+				"PWRGD_CHG_CPU3", "PWRGD_CHH_CPU3",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU3_ALERT_N", "SMB_VR_PVCCINFAON_CPU3_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU3_ALERT_N", "SMB_VR_PVCCD_HV_CPU3_ALERT_N",
+				"SMB_VR_PVCCIN_CPU3_ALERT_N", "SEL_SMB_DIMM_CPU3",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU3_AB_DRAM_G", "PWRGD_LVC3_CPU3_CD_DRAM_G",
+				"PWRGD_LVC3_CPU3_EF_DRAM_G", "PWRGD_LVC3_CPU3_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU3_DISABLE_COD_N", "",
+				"RST_LVC3_CPU3_RESET_N", "PWRGD_LVC3_CPU3_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU3_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU3_PROCHOT_N", "H_LVT3_CPU3_MEMHOT_IN_N",
+				"H_LVT3_CPU3_MEMHOT_OUT_N", "H_LVT3_CPU3_MEMTRIP_OUT_N",
+				"H_LVT3_CPU3_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU3_NMI", "FM_S3M_CPU3_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU3_PKG_ID0", "FM_CPU3_PKG_ID1",
+				"FM_CPU3_PROC_ID0", "FM_CPU3_PROC_ID1";
+
+				pinctrl-0 = <&U62110_pins>;
+				pinctrl-names = "default";
+				U62110_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu3@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu3: vout0 {
+						regulator-name = "pvccinfaon_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu3: vout1 {
+						regulator-name = "pvccfa_ehv_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu3@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu3: vout {
+						regulator-name = "pvnn_main_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu3@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu3: vout0 {
+						regulator-name = "pvccin_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu3: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu3@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu3: vout {
+						regulator-name = "pvccd_hv_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu3@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu3: vout {
+						regulator-name = "pvpp_hbm_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2cmux14: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux15: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 11 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux16: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 2 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux17: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 0 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux18: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 3 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux19: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 9 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_rssd17_32: pinctrl@20 {
+				compatible = "cypress,cy8c9560";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&bmc_pex_irq>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&bmc_pex_irq 19 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <48 12>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"RSSD17_SMBRST_N", "RSSD18_SMBRST_N",
+				"RSSD19_SMBRST_N", "RSSD20_SMBRST_N",
+				"RSSD21_SMBRST_N", "RSSD22_SMBRST_N",
+				"RSSD23_SMBRST_N", "RSSD24_SMBRST_N",
+				/* GPORT1 */
+				"RSSD25_SMBRST_N", "RSSD26_SMBRST_N",
+				"RSSD27_SMBRST_N", "RSSD28_SMBRST_N",
+				"RSSD29_SMBRST_N", "RSSD30_SMBRST_N",
+				"RSSD31_SMBRST_N", "RSSD32_SMBRST_N",
+				/* GPORT2 */
+				"RSSD17_PWRDIS", "RSSD18_PWRDIS",
+				"RSSD19_PWRDIS", "RSSD20_PWRDIS",
+				/* GPORT3 */
+				"RSSD21_PWRDIS", "RSSD22_PWRDIS",
+				"RSSD23_PWRDIS", "RSSD24_PWRDIS",
+				"RSSD25_PWRDIS", "RSSD26_PWRDIS",
+				"RSSD27_PWRDIS", "RSSD28_PWRDIS",
+				/* GPORT4 */
+				"RSSD29_PWRDIS", "RSSD30_PWRDIS",
+				"RSSD31_PWRDIS", "RSSD32_PWRDIS",
+				"RSSD17_RESET_N", "RSSD18_RESET_N",
+				"RSSD19_RESET_N", "RSSD20_RESET_N",
+				/* GPORT5 */
+				"RSSD21_RESET_N", "RSSD22_RESET_N",
+				"RSSD23_RESET_N", "RSSD24_RESET_N",
+				"RSSD25_RESET_N", "RSSD26_RESET_N",
+				"RSSD27_RESET_N", "RSSD28_RESET_N",
+				/* GPORT6 */
+				"RSSD29_RESET_N", "RSSD30_RESET_N",
+				"RSSD31_RESET_N", "RSSD32_RESET_N",
+				"", "",
+				"", "",
+				/* GPORT7 */
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux20: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 4 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux21: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 5 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2cmux5: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 0) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux6: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 16 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux7: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux8: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 1 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux9: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 10 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux10: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_rssd_01_16: pinctrl@20 {
+				compatible = "cypress,cy8c9560";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&bmc_pex_irq>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&bmc_pex_irq 18 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <48 12>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"RSSD01_SMBRST_N", "RSSD02_SMBRST_N",
+				"RSSD03_SMBRST_N", "RSSD04_SMBRST_N",
+				"RSSD05_SMBRST_N", "RSSD06_SMBRST_N",
+				"RSSD07_SMBRST_N", "RSSD08_SMBRST_N",
+				/* GPORT1 */
+				"RSSD09_SMBRST_N", "RSSD10_SMBRST_N",
+				"RSSD11_SMBRST_N", "RSSD12_SMBRST_N",
+				"RSSD13_SMBRST_N", "RSSD14_SMBRST_N",
+				"RSSD15_SMBRST_N", "RSSD16_SMBRST_N",
+				/* GPORT2 */
+				"RSSD01_PWRDIS", "RSSD02_PWRDIS",
+				"RSSD03_PWRDIS", "RSSD04_PWRDIS",
+				/* GPORT3 */
+				"RSSD05_PWRDIS", "RSSD06_PWRDIS",
+				"RSSD07_PWRDIS", "RSSD08_PWRDIS",
+				"RSSD09_PWRDIS", "RSSD10_PWRDIS",
+				"RSSD11_PWRDIS", "RSSD12_PWRDIS",
+				/* GPORT4 */
+				"RSSD13_PWRDIS", "RSSD14_PWRDIS",
+				"RSSD15_PWRDIS", "RSSD16_PWRDIS",
+				"RSSD01_RESET_N", "RSSD02_RESET_N",
+				"RSSD03_RESET_N", "RSSD04_RESET_N",
+				/* GPORT5 */
+				"RSSD05_RESET_N", "RSSD06_RESET_N",
+				"RSSD07_RESET_N", "RSSD08_RESET_N",
+				"RSSD09_RESET_N", "RSSD10_RESET_N",
+				"RSSD11_RESET_N", "RSSD12_RESET_N",
+				/* GPORT6 */
+				"RSSD13_RESET_N", "RSSD14_RESET_N",
+				"RSSD15_RESET_N", "RSSD16_RESET_N",
+				"", "",
+				"", "",
+				/* GPORT7 */
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux11: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 12 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux12: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 14 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	i2cmux23: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 4) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_bmc_aux>;
+	};
+};
+
+&i2cmux23 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_pex_vr_ctrl: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 2) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"BCM0_INPUT_DISABLE_N", "SMB_VR_P3V3_AUX_ALERT_N",
+			"SMB_PEX_CPU1_EVENT_INT", "SMB_PEX_CPU2_EVENT_INT",
+			"DPIC0_VOLTAGE_DETECTB_N", "DPIC0_VOLTAGE_DETECTA_N",
+			"DPIC1_VOLTAGE_DETECTA_N", "DPIC1_VOLTAGE_DETECTB_N",
+			/* GPORT1 */
+			"SMB_PEX_NIC_INT", "SMB_VR_P1V05_PCH_AUX_ALERT_N",
+			"SMB_PEX_CPU0_EVENT_INT", "SMB_PEX_CPU3_EVENT_INT",
+			"LED_ID_TPM", "PLUG_DETECT_TPM",
+			"PLUG_DETECT_M2_SSD_CARRIER1", "RST_M2_SSD1_PERST_N",
+			/* GPORT2 */
+			"LED_ID_BAT", "LED_ID_MGMT_PORT2",
+			"LED_ID_MGMT_PORT1", "SMB_VR_P5V_AUX_ALERT_N",
+			/* GPORT3 */
+			"SMB_VR_AUX_SSB_ALERT_N", "BCM1_INPUT_DISABLE_N",
+			"LED_ID_NIC1_PORT1", "LED_ID_NIC1_PORT2",
+			"LED_ID_NIC2_PORT1", "LED_ID_NIC2_PORT2",
+			"RST_M2_SSD2_PERST_N", "PLUG_DETECT_M2_SSD2",
+			/* GPORT4 */
+			"PLUG_DETECT_BAT", "PLUG_DETECT_M2_SSD1",
+			"M2_SSD1_SSB_ALERT_N", "BCM2_INPUT_DISABLE_N",
+			"SMB_VR_P1V8_PCH_AUX_ALERT_N", "BCM3_INPUT_DISABLE_N",
+			"LED_PWR_DWR_BACK", "LED_ID_DWR_BACK_P",
+			/* GPORT5 */
+			"LED_ID_M2_SSD2", "LED_ID_M2_SSD1",
+			"PLUG_DETECT_M2_SSD_CARRIER2", "M2_SSD2_SSB_ALERT_N";
+
+			pinctrl-0 = <&U62120_input &U62120_input_pullup>;
+			pinctrl-names = "default";
+			U62120_input: input-pins {
+				pins = "gp10";
+				function = "gpio";
+				input-enable;
+				bias-disable;
+			};
+			U62120_input_pullup: input-pullup-pins {
+				pins = "gp01", "gp02", "gp03", "gp11", "gp12", "gp13",
+				"gp23", "gp30", "gp40", "gp42", "gp44", "gp53";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		bmc_pex_irq: pinctrl@20 {
+			compatible = "cypress,cy8c9520";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 1) GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"SMB_MUX_PWM_FANGRP2_RST_INT_N", "SMB_MUX_SSB_FANGRP2_RST_INT_N",
+			"SMB_MUX_PWM_FANGRP1_RST_INT_N", "SMB_MUX_SSB_RSSD01_08_RST_INT_N",
+			"SMB_MUX_RSSD01_08_RST_INT_N", "SMB_MUX_RSSD09_16_RST_INT_N",
+			"SMB_PEX_RSSD01_16_INT", "SMB_MUX_SSB_FANGRP1_RST_INT_N",
+			/* GPORT1 */
+			"SMB_SVC_PEX_FAN_ALERT_INT", "SMB_MUX_SSB_RSSD09_16_RST_INT_N",
+			"SMB_MUX_SSB_RSSD17_24_RST_INT_N", "SMB_MUX_PWM_FANGRP0_RST_INT_N",
+			"SMB_MUX_RSSD17_24_RST_INT_N", "SMB_PEX_RSSD17_32_INT",
+			"SMB_MUX_RSSD25_32_RST_INT_N", "SMB_MUX_SSB_RSSD25_32_RST_INT_N",
+			/* GPORT2 */
+			"SMB_MUX_SSB_FANGRP0_RST_INT_N", "PEX_FAN_ALERT_RST",
+			"PEX_RSSD01_16_RST", "PEX_RSSD17_32_RST";
+			pinctrl-0 = <&U60000_pins>;
+			pinctrl-names = "default";
+			U60000_pins: cfg-pins {
+				pins = "gp06", "gp10", "gp15";
+				function = "gpio";
+				input-enable;
+				bias-disable;
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2cmux24: mux@70 {
+			compatible = "maxim,max7357";
+			reg = <0x70>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vdd-supply = <&p3v3_bmc_aux>;
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		eeprom@51 {
+			compatible = "atmel,24c32";
+			reg = <0x51>;
+			pagesize = <32>;
+			vcc-supply = <&p3v3_bmc_aux>;
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2cmux25: mux@70 {
+			compatible = "maxim,max7357";
+			reg = <0x70>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2cmux25 {
+	reset-gpios = <&gpio0 ASPEED_GPIO(R, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+	vdd-supply = <&p3v3_bmc_aux>;
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		p5v_aux: ir38263-p5v-aux@40 {
+			compatible = "infineon,ir38263";
+			reg = <0x40>;
+
+			regulator-name = "p5v_aux";
+			regulator-enable-ramp-delay = <2000>;
+			vin-supply = <&p12v>;
+			vbus-supply = <&p3v3_bmc_aux>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		p3v3_aux: ir38263-p3v3-aux@40 {
+			compatible = "infineon,ir38263";
+			reg = <0x40>;
+
+			vin-supply = <&p12v>;
+			regulator-name = "p3v3_aux";
+			/*
+			 * 2msec for regulator + 18msec for board capacitance
+			 * Note: Every IC has a PTC which slowly charges the bypass
+			 * cap.
+			 */
+			regulator-enable-ramp-delay = <200000>;
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		aux_ssb: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_pex_vr_ctrl>;
+			interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+			vss1-supply = <&p5v_aux>;
+			vss2-supply = <&p3v3_aux>;
+			regulators {
+				p5v: sw0 {
+					regulator-name = "p5v";
+					shunt-resistor-micro-ohms = <12000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <100000>;
+				};
+				p3v3_pch: sw1 {
+					regulator-name = "p3v3_pch";
+					shunt-resistor-micro-ohms = <12000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <100000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_a: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_a: vout2 {
+					regulator-name = "bcm0";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_b: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_b: vout2 {
+					regulator-name = "bcm1";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_c: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_c: vout2 {
+					regulator-name = "bcm2";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_d: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_d: vout2 {
+					regulator-name = "bcm3";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux24 {
+
+	reset-gpios = <&gpio0 ASPEED_GPIO(P, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+	i2c@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		smb_svc_pex_rssd01_16: pinctrl@20 {
+			compatible = "cypress,cy8c9560";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&smb_svc_pex_cpu0_led 17 GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"LED_ID_RSSD01", "LED_ID_RSSD02",
+			"LED_ID_RSSD03", "LED_ID_RSSD04",
+			"LED_ID_RSSD05", "LED_ID_RSSD06",
+			"LED_ID_RSSD07", "LED_ID_RSSD08",
+			/* GPORT1 */
+			"LED_ID_RSSD09", "LED_ID_RSSD10",
+			"LED_ID_RSSD11", "LED_ID_RSSD12",
+			"LED_ID_RSSD13", "LED_ID_RSSD14",
+			"LED_ID_RSSD15", "LED_ID_RSSD16",
+			/* GPORT2 */
+			"RSSD01_PRESENT_N", "RSSD02_PRESENT_N",
+			"RSSD03_PRESENT_N", "RSSD04_PRESENT_N",
+			/* GPORT3 */
+			"RSSD05_PRESENT_N", "RSSD06_PRESENT_N",
+			"RSSD07_PRESENT_N", "RSSD08_PRESENT_N",
+			"RSSD09_PRESENT_N", "RSSD10_PRESENT_N",
+			"RSSD11_PRESENT_N", "RSSD12_PRESENT_N",
+			/* GPORT4 */
+			"RSSD13_PRESENT_N", "RSSD14_PRESENT_N",
+			"RSSD15_PRESENT_N", "RSSD16_PRESENT_N",
+			"LED_ID_FAN_ASM01", "LED_ID_FAN_ASM02",
+			"LED_ID_FAN_ASM03", "LED_ID_FAN_ASM04",
+			/* GPORT5 */
+			"LED_ID_FAN_ASM05", "LED_ID_FAN_ASM06",
+			"PLUG_DETECT_FAN_ASM01", "PLUG_DETECT_FAN_ASM02",
+			"PLUG_DETECT_FAN_ASM03", "PLUG_DETECT_FAN_ASM04",
+			"PLUG_DETECT_FAN_ASM05", "PLUG_DETECT_FAN_ASM06",
+			/* GPORT6 */
+			"SSB_RSSD01_ALERT_N", "SSB_RSSD02_ALERT_N",
+			"SSB_RSSD03_ALERT_N", "SSB_RSSD04_ALERT_N",
+			"SSB_RSSD05_ALERT_N", "SSB_RSSD06_ALERT_N",
+			"SSB_RSSD07_ALERT_N", "SSB_RSSD08_ALERT_N",
+			/* GPORT7 */
+			"SSB_RSSD09_ALERT_N", "SSB_RSSD10_ALERT_N",
+			"SSB_RSSD11_ALERT_N", "SSB_RSSD12_ALERT_N",
+			"SSB_RSSD13_ALERT_N", "SSB_RSSD14_ALERT_N",
+			"SSB_RSSD15_ALERT_N", "SSB_RSSD16_ALERT_N";
+			pinctrl-0 = <&U65200_pins>;
+			pinctrl-names = "default";
+			U65200_pins: cfg-pins {
+				pins = "gp60", "gp61", "gp62", "gp63", "gp64",
+				       "gp65", "gp66", "gp67", "gp70", "gp71",
+				       "gp72", "gp73", "gp74", "gp75", "gp76",
+				       "gp77";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_rssd17_32: pinctrl@20 {
+			compatible = "cypress,cy8c9560";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(H, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&smb_svc_pex_cpu1_led 17 GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"LED_ID_RSSD17", "LED_ID_RSSD18",
+			"LED_ID_RSSD19", "LED_ID_RSSD20",
+			"LED_ID_RSSD21", "LED_ID_RSSD22",
+			"LED_ID_RSSD23", "LED_ID_RSSD24",
+			/* GPORT1 */
+			"LED_ID_RSSD25", "LED_ID_RSSD26",
+			"LED_ID_RSSD27", "LED_ID_RSSD28",
+			"LED_ID_RSSD29", "LED_ID_RSSD30",
+			"LED_ID_RSSD31", "LED_ID_RSSD32",
+			/* GPORT2 */
+			"RSSD17_PRESENT_N", "RSSD18_PRESENT_N",
+			"RSSD19_PRESENT_N", "RSSD20_PRESENT_N",
+			/* GPORT3 */
+			"RSSD21_PRESENT_N", "RSSD22_PRESENT_N",
+			"RSSD23_PRESENT_N", "RSSD24_PRESENT_N",
+			"RSSD25_PRESENT_N", "RSSD26_PRESENT_N",
+			"RSSD27_PRESENT_N", "RSSD28_PRESENT_N",
+			/* GPORT4 */
+			"RSSD29_PRESENT_N", "RSSD30_PRESENT_N",
+			"RSSD31_PRESENT_N", "RSSD32_PRESENT_N",
+			"LED_ID_FAN_ASM07", "LED_ID_FAN_ASM08",
+			"LED_ID_FAN_ASM09", "LED_ID_FAN_ASM10",
+			/* GPORT5 */
+			"LED_ID_FAN_ASM11", "LED_ID_FAN_ASM12",
+			"PLUG_DETECT_FAN_ASM07", "PLUG_DETECT_FAN_ASM08",
+			"PLUG_DETECT_FAN_ASM09", "PLUG_DETECT_FAN_ASM10",
+			"PLUG_DETECT_FAN_ASM11", "PLUG_DETECT_FAN_ASM12",
+			/* GPORT6 */
+			"SSB_RSSD17_ALERT_N", "SSB_RSSD18_ALERT_N",
+			"SSB_RSSD19_ALERT_N", "SSB_RSSD20_ALERT_N",
+			"SSB_RSSD21_ALERT_N", "SSB_RSSD22_ALERT_N",
+			"SSB_RSSD23_ALERT_N", "SSB_RSSD24_ALERT_N",
+			/* GPORT7 */
+			"SSB_RSSD25_ALERT_N", "SSB_RSSD26_ALERT_N",
+			"SSB_RSSD27_ALERT_N", "SSB_RSSD28_ALERT_N",
+			"SSB_RSSD29_ALERT_N", "SSB_RSSD30_ALERT_N",
+			"SSB_RSSD31_ALERT_N", "SSB_RSSD32_ALERT_N";
+			pinctrl-0 = <&U65300_pins>;
+			pinctrl-names = "default";
+			U65300_pins: cfg-pins {
+				pins = "gp60", "gp61", "gp62",
+				"gp63", "gp64", "gp65", "gp66",
+				"gp67", "gp70", "gp71", "gp72",
+				"gp73", "gp74", "gp75", "gp76",
+				"gp77";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_cpu1_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 6) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 5) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <18 2>, <36 2>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C1E2", "PLUG_DETECT_DIMM_C1E1",
+			"PLUG_DETECT_DIMM_C1F2", "PLUG_DETECT_DIMM_C1F1",
+			"PLUG_DETECT_DIMM_C1G2", "PLUG_DETECT_DIMM_C1G1",
+			"PLUG_DETECT_DIMM_C1H2", "PLUG_DETECT_DIMM_C1H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C1D1", "PLUG_DETECT_DIMM_C1D2",
+			"PLUG_DETECT_DIMM_C1C1", "PLUG_DETECT_DIMM_C1C2",
+			"PLUG_DETECT_DIMM_C1B1", "PLUG_DETECT_DIMM_C1B2",
+			"PLUG_DETECT_DIMM_C1A1", "PLUG_DETECT_DIMM_C1A2",
+			/* GPORT2 */
+			"PEX_CPU1_EVENT_RST", "SVC_PEX_RSSD17_32_RST",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C1E2", "LED_ID_DIMM_C1E1",
+			"LED_ID_DIMM_C1F2", "LED_ID_DIMM_C1F1",
+			"LED_ID_DIMM_C1G2", "LED_ID_DIMM_C1G1",
+			"LED_ID_DIMM_C1H2", "LED_ID_DIMM_C1H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C1A2", "LED_ID_DIMM_C1A1",
+			"LED_ID_DIMM_C1B2", "LED_ID_DIMM_C1B1",
+			"LED_ID_DIMM_C1C2", "LED_ID_DIMM_C1C1",
+			"LED_ID_DIMM_C1D2", "LED_ID_DIMM_C1D1",
+			/* GPORT5 */
+			"", "",
+			"FM_CPU1_SKTOCC_N", "LED_ID_CPU1";
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_fan_alert: pinctrl@20 {
+			compatible = "cypress,cy8c9560";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&bmc_pex_irq>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_aux>;
+			reset-gpios = <&bmc_pex_irq 17 GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <24 3>, <51 9>;
+			gpio-line-names =
+			/* GPORT0 */
+			"FAN01_SSB_ALERT_N", "FAN02_SSB_ALERT_N",
+			"FAN03_SSB_ALERT_N", "FAN04_SSB_ALERT_N",
+			"FAN05_SSB_ALERT_N", "FAN06_SSB_ALERT_N",
+			"FAN07_SSB_ALERT_N", "FAN08_SSB_ALERT_N",
+			/* GPORT1 */
+			"FAN09_SSB_ALERT_N", "FAN10_SSB_ALERT_N",
+			"FAN11_SSB_ALERT_N", "FAN12_SSB_ALERT_N",
+			"FAN13_SSB_ALERT_N", "FAN14_SSB_ALERT_N",
+			"FAN15_SSB_ALERT_N", "FAN16_SSB_ALERT_N",
+			/* GPORT2 */
+			"FAN17_SSB_ALERT_N", "FAN18_SSB_ALERT_N",
+			"FAN19_SSB_ALERT_N", "FAN20_SSB_ALERT_N",
+			/* GPORT3 */
+			"FAN21_SSB_ALERT_N", "FAN22_SSB_ALERT_N",
+			"FAN23_SSB_ALERT_N", "FAN24_SSB_ALERT_N",
+			"", "",
+			"", "FAN01_PWM_ALERT_N",
+			/* GPORT4 */
+			"FAN02_PWM_ALERT_N", "FAN03_PWM_ALERT_N",
+			"FAN04_PWM_ALERT_N", "FAN05_PWM_ALERT_N",
+			"FAN06_PWM_ALERT_N", "FAN07_PWM_ALERT_N",
+			"FAN08_PWM_ALERT_N", "FAN09_PWM_ALERT_N",
+			/* GPORT5 */
+			"FAN10_PWM_ALERT_N", "FAN11_PWM_ALERT_N",
+			"FAN12_PWM_ALERT_N", "FAN13_PWM_ALERT_N",
+			"FAN14_PWM_ALERT_N", "FAN15_PWM_ALERT_N",
+			"FAN16_PWM_ALERT_N", "FAN17_PWM_ALERT_N",
+			/* GPORT6 */
+			"FAN18_PWM_ALERT_N", "FAN19_PWM_ALERT_N",
+			"FAN20_PWM_ALERT_N", "FAN21_PWM_ALERT_N",
+			"FAN22_PWM_ALERT_N", "FAN23_PWM_ALERT_N",
+			"FAN24_PWM_ALERT_N", "",
+			/* GPORT7 */
+			"", "",
+			"", "",
+			"", "",
+			"", "";
+			pinctrl-0 = <&U65600_pins>;
+			pinctrl-names = "default";
+			U65600_pins: cfg-pins {
+				pins = "gp00", "gp01", "gp02",
+				"gp03", "gp04", "gp05", "gp06",
+				"gp07", "gp10", "gp11", "gp12",
+				"gp13", "gp14", "gp15", "gp16",
+				"gp17", "gp20", "gp21", "gp22",
+				"gp23", "gp30", "gp31", "gp32",
+				"gp33", "gp37", "gp40", "gp41",
+				"gp42", "gp43", "gp44", "gp45",
+				"gp46", "gp47", "gp50", "gp51",
+				"gp52", "gp53", "gp54", "gp55",
+				"gp56", "gp57", "gp60", "gp61",
+				"gp62", "gp63", "gp64", "gp65",
+				"gp66";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_cpu2_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 5) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <17 3>, <36 2>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C2E2", "PLUG_DETECT_DIMM_C2E1",
+			"PLUG_DETECT_DIMM_C2F2", "PLUG_DETECT_DIMM_C2F1",
+			"PLUG_DETECT_DIMM_C2G2", "PLUG_DETECT_DIMM_C2G1",
+			"PLUG_DETECT_DIMM_C2H2", "PLUG_DETECT_DIMM_C2H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C2D1", "PLUG_DETECT_DIMM_C2D2",
+			"PLUG_DETECT_DIMM_C2C1", "PLUG_DETECT_DIMM_C2C2",
+			"PLUG_DETECT_DIMM_C2B1", "PLUG_DETECT_DIMM_C2B2",
+			"PLUG_DETECT_DIMM_C2A1", "PLUG_DETECT_DIMM_C2A2",
+			/* GPORT2 */
+			"PEX_CPU2_EVENT_RST", "",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C2E2", "LED_ID_DIMM_C2E1",
+			"LED_ID_DIMM_C2F2", "LED_ID_DIMM_C2F1",
+			"LED_ID_DIMM_C2G2", "LED_ID_DIMM_C2G1",
+			"LED_ID_DIMM_C2H2", "LED_ID_DIMM_C2H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C2A2", "LED_ID_DIMM_C2A1",
+			"LED_ID_DIMM_C2B2", "LED_ID_DIMM_C2B1",
+			"LED_ID_DIMM_C2C2", "LED_ID_DIMM_C2C1",
+			"LED_ID_DIMM_C2D2", "LED_ID_DIMM_C2D1",
+			/* GPORT5 */
+			"", "",
+			"FM_CPU2_SKTOCC_N", "LED_ID_CPU2";
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		smb_svc_pex_cpu3_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 3) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <17 3>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C3E2", "PLUG_DETECT_DIMM_C3E1",
+			"PLUG_DETECT_DIMM_C3F2", "PLUG_DETECT_DIMM_C3F1",
+			"PLUG_DETECT_DIMM_C3G2", "PLUG_DETECT_DIMM_C3G1",
+			"PLUG_DETECT_DIMM_C3H2", "PLUG_DETECT_DIMM_C3H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C3D1", "PLUG_DETECT_DIMM_C3D2",
+			"PLUG_DETECT_DIMM_C3C1", "PLUG_DETECT_DIMM_C3C2",
+			"PLUG_DETECT_DIMM_C3B1", "PLUG_DETECT_DIMM_C3B2",
+			"PLUG_DETECT_DIMM_C3A1", "PLUG_DETECT_DIMM_C3A2",
+			/* GPORT2 */
+			"PEX_CPU3_EVENT_RST", "",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C3E2", "LED_ID_DIMM_C3E1",
+			"LED_ID_DIMM_C3F2", "LED_ID_DIMM_C3F1",
+			"LED_ID_DIMM_C3G2", "LED_ID_DIMM_C3G1",
+			"LED_ID_DIMM_C3H2", "LED_ID_DIMM_C3H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C3A2", "LED_ID_DIMM_C3A1",
+			"LED_ID_DIMM_C3B2", "LED_ID_DIMM_C3B1",
+			"LED_ID_DIMM_C3C2", "LED_ID_DIMM_C3C1",
+			"LED_ID_DIMM_C3D2", "LED_ID_DIMM_C3D1",
+			/* GPORT5 */
+			"LED_PWR_DWR_FRNT", "LED_ID_DWR_FRNT_P",
+			"FM_CPU3_SKTOCC_N", "LED_ID_CPU3";
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_cpu0_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(O, 3) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <18 2>, <36 2>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C0E2", "PLUG_DETECT_DIMM_C0E1",
+			"PLUG_DETECT_DIMM_C0F2", "PLUG_DETECT_DIMM_C0F1",
+			"PLUG_DETECT_DIMM_C0G2", "PLUG_DETECT_DIMM_C0G1",
+			"PLUG_DETECT_DIMM_C0H2", "PLUG_DETECT_DIMM_C0H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C0D1", "PLUG_DETECT_DIMM_C0D2",
+			"PLUG_DETECT_DIMM_C0C1", "PLUG_DETECT_DIMM_C0C2",
+			"PLUG_DETECT_DIMM_C0B1", "PLUG_DETECT_DIMM_C0B2",
+			"PLUG_DETECT_DIMM_C0A1", "PLUG_DETECT_DIMM_C0A2",
+			/* GPORT2 */
+			"PEX_CPU0_EVENT_RST", "SVC_PEX_RSSD01_16_RST",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C0E2", "LED_ID_DIMM_C0E1",
+			"LED_ID_DIMM_C0F2", "LED_ID_DIMM_C0F1",
+			"LED_ID_DIMM_C0G2", "LED_ID_DIMM_C0G1",
+			"LED_ID_DIMM_C0H2", "LED_ID_DIMM_C0H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C0A2", "LED_ID_DIMM_C0A1",
+			"LED_ID_DIMM_C0B2", "LED_ID_DIMM_C0B1",
+			"LED_ID_DIMM_C0C2", "LED_ID_DIMM_C0C1",
+			"LED_ID_DIMM_C0D2", "LED_ID_DIMM_C0D1",
+			/* GPORT5 */
+			"", "",
+			"FM_CPU0_SKTOCC_N", "LED_ID_CPU0";
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	p1v2_bmc_aux_mon: pmic@60 {
+		compatible = "maxim,max8952";
+		reg = <0x60>;
+		max8952,default-mode = <3>;
+		max8952,dvs-mode-microvolt = <1100000>, <1100000>,
+					     <1100000>, <1100000>;
+		max8952,sync-freq = <0>;
+		max8952,ramp-speed = <0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2cmux8 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan10_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan10_ssb: sw0 {
+					regulator-name = "fan10_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan12_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan12_ssb: sw0 {
+					regulator-name = "fan12_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan14_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan14_ssb: sw0 {
+					regulator-name = "fan14_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan16_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan16_ssb: sw0 {
+					regulator-name = "fan16_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan18_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan18_ssb: sw0 {
+					regulator-name = "fan18_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan20_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan20_ssb: sw0 {
+					regulator-name = "fan20_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan22_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan22_ssb: sw0 {
+					regulator-name = "fan22_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan24_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan24_ssb: sw0 {
+					regulator-name = "fan24_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux7 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan17_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan17_ssb: sw0 {
+					regulator-name = "fan17_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan19_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan19_ssb: sw0 {
+					regulator-name = "fan19_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan21_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan21_ssb: sw0 {
+					regulator-name = "fan21_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan23_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan23_ssb: sw0 {
+					regulator-name = "fan23_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan02_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan02_ssb: sw0 {
+					regulator-name = "fan02_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan04_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan04_ssb: sw0 {
+					regulator-name = "fan04_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan06_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan06_ssb: sw0 {
+					regulator-name = "fan06_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan08_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan08_ssb: sw0 {
+					regulator-name = "fan08_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux6 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan01_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan01_ssb: sw0 {
+					regulator-name = "fan01_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan03_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan03_ssb: sw0 {
+					regulator-name = "fan03_supply";
+
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan05_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan05_ssb: sw0 {
+					regulator-name = "fan05_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan07_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan07_ssb: sw0 {
+					regulator-name = "fan07_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan09_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan09_ssb: sw0 {
+					regulator-name = "fan09_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan11_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan11_ssb: sw0 {
+					regulator-name = "fan11_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan13_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan13_ssb: sw0 {
+					regulator-name = "fan13_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan15_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan15_ssb: sw0 {
+					regulator-name = "fan15_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+
+	};
+};
+
+&i2cmux9 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd19: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <46 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd19:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd19: sw0 {
+					regulator-name = "rssd19_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd19: sw1 {
+					regulator-name = "rssd19_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd18: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd18:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd18: sw0 {
+					regulator-name = "rssd18_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd18: sw1 {
+					regulator-name = "rssd18_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd17: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd17:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd17: sw0 {
+					regulator-name = "rssd17_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd17: sw1 {
+					regulator-name = "rssd17_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd20: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <47 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd20:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd20: sw0 {
+					regulator-name = "rssd20_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd20: sw1 {
+					regulator-name = "rssd20_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd21: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <48 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd21:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd21: sw0 {
+					regulator-name = "rssd21_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd21: sw1 {
+					regulator-name = "rssd21_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd22: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <49 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd22:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd22: sw0 {
+					regulator-name = "rssd22_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd22: sw1 {
+					regulator-name = "rssd22_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd24: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd24:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd24: sw0 {
+					regulator-name = "rssd24_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd24: sw1 {
+					regulator-name = "rssd24_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd23: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <50 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd23:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd23: sw0 {
+					regulator-name = "rssd23_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd23: sw1 {
+					regulator-name = "rssd23_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux10 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd25: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <52 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd25:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd25: sw0 {
+					regulator-name = "rssd25_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd25: sw1 {
+					regulator-name = "rssd25_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd26: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <53 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd26:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd26: sw0 {
+					regulator-name = "rssd26_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd26: sw1 {
+					regulator-name = "rssd26_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd27: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <54 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd27:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd27: sw0 {
+					regulator-name = "rssd27_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd27: sw1 {
+					regulator-name = "rssd27_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd32: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd32:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd32: sw0 {
+					regulator-name = "rssd32_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd32: sw1 {
+					regulator-name = "rssd32_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd31: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <58 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd31:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd31: sw0 {
+					regulator-name = "rssd31_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd31: sw1 {
+					regulator-name = "rssd31_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd30: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <57 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd30:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd30: sw0 {
+					regulator-name = "rssd30_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd30: sw1 {
+					regulator-name = "rssd30_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd29: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd29:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd29: sw0 {
+					regulator-name = "rssd29_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd29: sw1 {
+					regulator-name = "rssd29_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd28: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd28:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd28: sw0 {
+					regulator-name = "rssd28_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd28: sw1 {
+					regulator-name = "rssd28_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux18 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd03: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <46 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd03:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd03: sw0 {
+					regulator-name = "rssd03_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd03: sw1 {
+					regulator-name = "rssd03_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd02: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd02:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd02: sw0 {
+					regulator-name = "rssd02_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd02: sw1 {
+					regulator-name = "rssd02_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd01: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd01:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd01: sw0 {
+					regulator-name = "rssd01_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd01: sw1 {
+					regulator-name = "rssd01_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd04: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <47 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd04:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd04: sw0 {
+					regulator-name = "rssd04_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd04: sw1 {
+					regulator-name = "rssd04_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd05: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <48 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd05:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd05: sw0 {
+					regulator-name = "rssd05_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd05: sw1 {
+					regulator-name = "rssd05_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd08: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd08:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd08: sw0 {
+					regulator-name = "rssd08_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd08: sw1 {
+					regulator-name = "rssd08_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd07: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <50 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd07:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd07: sw0 {
+					regulator-name = "rssd07_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd07: sw1 {
+					regulator-name = "rssd07_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd06: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <49 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd06:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd06: sw0 {
+					regulator-name = "rssd06_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd06: sw1 {
+					regulator-name = "rssd06_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux19 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd14: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <57 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd14:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd14: sw0 {
+					regulator-name = "rssd14_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd14: sw1 {
+					regulator-name = "rssd14_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd13: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd13:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd13: sw0 {
+					regulator-name = "rssd13_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd13: sw1 {
+					regulator-name = "rssd13_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd12: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd12:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd12: sw0 {
+					regulator-name = "rssd12_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd12: sw1 {
+					regulator-name = "rssd12_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd11: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <54 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd11:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd11: sw0 {
+					regulator-name = "rssd11_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd11: sw1 {
+					regulator-name = "rssd11_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd10: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <53 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd10:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd10: sw0 {
+					regulator-name = "rssd10_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd10: sw1 {
+					regulator-name = "rssd10_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd09: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <52 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd09:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd09: sw0 {
+					regulator-name = "rssd09_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd09: sw1 {
+					regulator-name = "rssd09_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd15: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <58 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd15:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd15: sw0 {
+					regulator-name = "rssd15_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd15: sw1 {
+					regulator-name = "rssd15_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd16: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd16:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd16: sw0 {
+					regulator-name = "rssd16_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd16: sw1 {
+					regulator-name = "rssd16_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
new file mode 100644
index 000000000000..c8267c97a44e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
@@ -0,0 +1,1671 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "System1";
+	compatible = "ibm,system1-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c16 = &i2c8mux1chn0;
+		i2c17 = &i2c8mux1chn1;
+		i2c18 = &i2c8mux1chn2;
+		i2c19 = &i2c8mux1chn3;
+		i2c20 = &i2c8mux1chn4;
+		i2c21 = &i2c8mux1chn5;
+		i2c22 = &i2c8mux1chn6;
+		i2c23 = &i2c8mux1chn7;
+		i2c24 = &i2c3mux0chn0;
+		i2c25 = &i2c3mux0chn1;
+		i2c26 = &i2c3mux0chn2;
+		i2c27 = &i2c3mux0chn3;
+		i2c28 = &i2c3mux0chn4;
+		i2c29 = &i2c3mux0chn5;
+		i2c30 = &i2c3mux0chn6;
+		i2c31 = &i2c3mux0chn7;
+		i2c32 = &i2c6mux0chn0;
+		i2c33 = &i2c6mux0chn1;
+		i2c34 = &i2c6mux0chn2;
+		i2c35 = &i2c6mux0chn3;
+		i2c36 = &i2c6mux0chn4;
+		i2c37 = &i2c6mux0chn5;
+		i2c38 = &i2c6mux0chn6;
+		i2c39 = &i2c6mux0chn7;
+		i2c40 = &i2c7mux0chn0;
+		i2c41 = &i2c7mux0chn1;
+		i2c42 = &i2c7mux0chn2;
+		i2c43 = &i2c7mux0chn3;
+		i2c44 = &i2c7mux0chn4;
+		i2c45 = &i2c7mux0chn5;
+		i2c46 = &i2c7mux0chn6;
+		i2c47 = &i2c7mux0chn7;
+		i2c48 = &i2c8mux0chn0;
+		i2c49 = &i2c8mux0chn1;
+		i2c50 = &i2c8mux0chn2;
+		i2c51 = &i2c8mux0chn3;
+		i2c52 = &i2c8mux0chn4;
+		i2c53 = &i2c8mux0chn5;
+		i2c54 = &i2c8mux0chn6;
+		i2c55 = &i2c8mux0chn7;
+		i2c56 = &i2c14mux0chn0;
+		i2c57 = &i2c14mux0chn1;
+		i2c58 = &i2c14mux0chn2;
+		i2c59 = &i2c14mux0chn3;
+		i2c60 = &i2c14mux0chn4;
+		i2c61 = &i2c14mux0chn5;
+		i2c62 = &i2c14mux0chn6;
+		i2c63 = &i2c14mux0chn7;
+		i2c64 = &i2c15mux0chn0;
+		i2c65 = &i2c15mux0chn1;
+		i2c66 = &i2c15mux0chn2;
+		i2c67 = &i2c15mux0chn3;
+		i2c68 = &i2c15mux0chn4;
+		i2c69 = &i2c15mux0chn5;
+		i2c70 = &i2c15mux0chn6;
+		i2c71 = &i2c15mux0chn7;
+	};
+
+	chosen {
+		stdout-path = "uart5:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		eventlog: tcg-event-log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-bmc-ready {
+			gpios = <&gpio0 ASPEED_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bmc-hb {
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fan0-fault {
+			gpios = <&pca3 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan1-fault {
+			gpios = <&pca3 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan2-fault {
+			gpios = <&pca3 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan3-fault {
+			gpios = <&pca3 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan4-fault {
+			gpios = <&pca3 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan5-fault {
+			gpios = <&pca3 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan6-fault {
+			gpios = <&pca3 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-nvmed0-fault {
+			gpios = <&pca4 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-nvmed1-fault {
+			gpios = <&pca4 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-nvmed2-fault {
+			gpios = <&pca4 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-nvmed3-fault {
+			gpios = <&pca4 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-nvme0-presence {
+			label = "nvme0-presence";
+			gpios = <&pca4 0 GPIO_ACTIVE_LOW>;
+			linux,code = <0>;
+		};
+
+		event-nvme1-presence {
+			label = "nvme1-presence";
+			gpios = <&pca4 1 GPIO_ACTIVE_LOW>;
+			linux,code = <1>;
+		};
+
+		event-nvme2-presence {
+			label = "nvme2-presence";
+			gpios = <&pca4 2 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		event-nvme3-presence {
+			label = "nvme3-presence";
+			gpios = <&pca4 3 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>,
+			<&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>,
+			<&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>,
+			<&adc1 4>, <&adc0 2>, <&adc1 0>,
+			<&p2v5_aux_vd 0>, <&adc1 7>;
+	};
+
+	p12v_vd: voltage-divider1 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1127/127 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <15>;
+		full-ohms = <133>;
+	};
+
+	p5v_aux_vd: voltage-divider2 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 5>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p5v_bmc_aux_vd: voltage-divider3 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p3v3_aux_vd: voltage-divider4 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 2>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p3v3_bmc_aux_vd: voltage-divider5 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 7>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p1v8_bmc_aux_vd: voltage-divider6 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 6>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 4000/3000 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <3>;
+		full-ohms = <4>;
+	};
+
+	p2v5_aux_vd: voltage-divider7 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 1>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 2100/1100 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <11>;
+		full-ohms = <21>;
+	};
+
+	p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+	aspeed,battery-sensing;
+
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_gpiol4_unbiased: gpiol4 {
+		pins = "C15";
+		bias-disable;
+	};
+
+	pinctrl_gpiol5_unbiased: gpiol5 {
+		pins = "F15";
+		bias-disable;
+	};
+
+	pinctrl_gpiol6_unbiased: gpiol6 {
+		pins = "B14";
+		bias-disable;
+	};
+
+	pinctrl_gpiol7_unbiased: gpiol7 {
+		pins = "C14";
+		bias-disable;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiol4_unbiased
+		&pinctrl_gpiol5_unbiased
+		&pinctrl_gpiol6_unbiased
+		&pinctrl_gpiol7_unbiased>;
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","bmc-tpm-reset","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","led-bmc-ready",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"pch-reset","","","","","flash-write-override","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","pch-ready","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","led-rear-enc-fault0","led-rear-enc-id0",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","rtc-battery-voltage-read-enable","","power-chassis-control","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"fpga-pgood","power-chassis-good","pch-pgood","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	pin-gpio-hog-0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "RST_RTCRST_N";
+	};
+
+	pin-gpio-hog-1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "RST_SRTCRST_N";
+	};
+
+	pin-gpio-hog-2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FAN_E3_SVC_PEX_INT_N";
+	};
+
+	pin-gpio-hog-3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 6) GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "isolate_errs_cpu1";
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <500000>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	regulator@42 {
+		compatible = "infineon,ir38263";
+		reg = <0x42>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nic1-perst";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "bmc-perst";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "reset-M2-SSD1-2-perst";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcie-perst1";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcie-perst2";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcie-perst3";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcie-perst4";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcie-perst5";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcie-perst6";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcie-perst7";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcie-perst8";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "PV-cp0-sw1stk4-perst";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "PV-cp0-sw1stk5-perst";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "pe-cp-drv0-perst";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pe-cp-drv1-perst";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "lom-perst";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"PLUG_DETECT_PCIE_J101_N",
+			"PLUG_DETECT_PCIE_J102_N",
+			"PLUG_DETECT_PCIE_J103_N",
+			"PLUG_DETECT_PCIE_J104_N",
+			"PLUG_DETECT_PCIE_J105_N",
+			"PLUG_DETECT_PCIE_J106_N",
+			"PLUG_DETECT_PCIE_J107_N",
+			"PLUG_DETECT_PCIE_J108_N",
+			"PLUG_DETECT_M2_SSD1_N",
+			"PLUG_DETECT_NIC1_N",
+			"SEL_SMB_DIMM_CPU0",
+			"presence-ps2",
+			"presence-ps3",
+			"", "",
+			"PWRBRD_PLUG_DETECT2_N";
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "intel,crps185";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "intel,crps185";
+		reg = <0x59>;
+	};
+
+	power-supply@5a {
+		compatible = "intel,crps185";
+		reg = <0x5a>;
+	};
+
+	power-supply@5b {
+		compatible = "intel,crps185";
+		reg = <0x5b>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c3mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c3mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c3mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c3mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c3mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c3mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c3mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c3mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	regulator@42 {
+		compatible = "infineon,ir38263";
+		reg = <0x42>;
+	};
+
+	regulator@43 {
+		compatible = "infineon,ir38060";
+		reg = <0x43>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	fan-controller@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+	};
+
+	fan-controller@54 {
+		compatible = "maxim,max31785a";
+		reg = <0x54>;
+	};
+
+	eeprom@55 {
+		compatible = "atmel,24c64";
+		reg = <0x55>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c6mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			humidity-sensor@40 {
+				compatible = "ti,hdc1080";
+				reg = <0x40>;
+			};
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp275";
+				reg = <0x48>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "enclosure-id-led";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "attention-led";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "enclosure-fault-rollup-led";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "power-on-led";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			temperature-sensor@76 {
+				compatible = "infineon,dps310";
+				reg = <0x76>;
+			};
+		};
+
+		i2c6mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c6mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c6mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+
+	pca3: gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca4: gpio@77 {
+		compatible = "nxp,pca9539";
+		reg = <0x77>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"PE_NVMED0_EXP_PRSNT_N",
+			"PE_NVMED1_EXP_PRSNT_N",
+			"PE_NVMED2_EXP_PRSNT_N",
+			"PE_NVMED3_EXP_PRSNT_N",
+			"LED_FAULT_NVMED0",
+			"LED_FAULT_NVMED1",
+			"LED_FAULT_NVMED2",
+			"LED_FAULT_NVMED3",
+			"FAN0_PRESENCE_R_N",
+			"FAN1_PRESENCE_R_N",
+			"FAN2_PRESENCE_R_N",
+			"FAN3_PRESENCE_R_N",
+			"FAN4_PRESENCE_R_N",
+			"FAN5_PRESENCE_N",
+			"FAN6_PRESENCE_N",
+			"";
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c7mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c7mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c7mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c7mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			regulator@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+			};
+		};
+
+		i2c7mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c7mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+		};
+
+		i2c7mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c7mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c8mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+
+			regulator@41 {
+				compatible = "infineon,tda38640";
+				reg = <0x41>;
+			};
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+
+			regulator@5b {
+				compatible = "mps,mp2971";
+				reg = <0x5b>;
+			};
+		};
+
+		i2c8mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c8mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c8mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c8mux1chn0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c8mux1chn1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c8mux1chn2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c8mux1chn3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				i2c8mux1chn4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				i2c8mux1chn5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				i2c8mux1chn6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				i2c8mux1chn7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		i2c8mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c8mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp432";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c8mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			regulator@40 {
+				compatible = "infineon,ir38060";
+				reg = <0x40>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	regulator@40 {
+		compatible = "infineon,ir38263";
+		reg = <0x40>;
+	};
+
+	regulator@41 {
+		compatible = "infineon,ir38263";
+		reg = <0x41>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&eventlog>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+
+	regulator@41 {
+		compatible = "infineon,ir38263";
+		reg = <0x41>;
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "efuse-12v-slots";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "efuse-3p3v-slot";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nic2-pert";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcie-perst9";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcie-perst10";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcie-perst11";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcie-perst12";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcie-perst13";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcie-perst14";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcie-perst15";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcie-perst16";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "PV-cp1-sw1stk4-perst";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "PV-cp1-sw1stk5-perst";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pe-cp-drv2-perst";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "pe-cp-drv3-perst";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	gpio@75 {
+		compatible = "nxp,pca9539";
+		reg = <0x75>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"PLUG_DETECT_PCIE_J109_N",
+			"PLUG_DETECT_PCIE_J110_N",
+			"PLUG_DETECT_PCIE_J111_N",
+			"PLUG_DETECT_PCIE_J112_N",
+			"PLUG_DETECT_PCIE_J113_N",
+			"PLUG_DETECT_PCIE_J114_N",
+			"PLUG_DETECT_PCIE_J115_N",
+			"PLUG_DETECT_PCIE_J116_N",
+			"PLUG_DETECT_M2_SSD2_N",
+			"PLUG_DETECT_NIC2_N",
+			"SEL_SMB_DIMM_CPU1",
+			"presence-ps0",
+			"presence-ps1",
+			"", "",
+			"PWRBRD_PLUG_DETECT1_N";
+	};
+
+	gpio@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SW1_BOOTRCVRYB1_N",
+			"SW1_BOOTRCVRYB0_N",
+			"SW2_BOOTRCVRYB1_N",
+			"SW2_BOOTRCVRYB0_N",
+			"SW3_4_BOOTRCVRYB1_N",
+			"SW3_4_BOOTRCVRYB0_N",
+			"SW5_BOOTRCVRYB1_N",
+			"SW5_BOOTRCVRYB0_N",
+			"SW6_BOOTRCVRYB1_N",
+			"SW6_BOOTRCVRYB0_N",
+			"SW1_RESET_N",
+			"SW3_RESET_N",
+			"SW4_RESET_N",
+			"SW2_RESET_N",
+			"SW5_RESET_N",
+			"SW6_RESET_N";
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c14mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			regulator@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+			};
+		};
+
+		i2c14mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c14mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+		};
+
+		i2c14mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c14mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+
+			regulator@41 {
+				compatible = "infineon,tda38640";
+				reg = <0x41>;
+			};
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+
+			regulator@5b {
+				compatible = "mps,mp2971";
+				reg = <0x5b>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c15mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c15mux1chn0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c15mux1chn1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c15mux1chn2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c15mux1chn3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				i2c15mux1chn4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				i2c15mux1chn5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				i2c15mux1chn6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				i2c15mux1chn7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		i2c15mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c15mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp432";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c15mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			regulator@40 {
+				compatible = "infineon,ir38060";
+				reg = <0x40>;
+			};
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp432";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
index 208b0f094ed9..79c6919b3570 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
@@ -54,10 +54,9 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		compatible = "aspeed,ast2500-cf-fsi-master";
 		#address-cells = <2>;
 		#size-cells = <0>;
-		no-gpio-delays;
 
 		memory-region = <&coldfire_memory>;
 		aspeed,sram = <&sram>;
@@ -348,7 +347,7 @@
 		label = "outlet";
 	};
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -432,7 +431,7 @@
 &i2c7 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -814,10 +813,6 @@
 	memory-region = <&gfx_memory>;
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &wdt1 {
 	aspeed,reset-type = "none";
 	aspeed,external-signal;
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts
index b3c1e3ba5831..92b9b3987c92 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts
@@ -215,7 +215,7 @@
 		label = "outlet";
 	};
 
-	pca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		reg = <0x70>;
 	};
@@ -224,17 +224,17 @@
 &i2c3 {
 	status = "okay";
 
-	pca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		reg = <0x70>;
 	};
 
-	pca9548@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9548";
 		reg = <0x71>;
 	};
 
-	pca9548@72 {
+	i2c-mux@72 {
 		compatible = "nxp,pca9548";
 		reg = <0x72>;
 	};
@@ -248,7 +248,7 @@
 &i2c5 {
 	status = "okay";
 
-	pca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		reg = <0x70>;
 	};
@@ -257,7 +257,7 @@
 &i2c6 {
 	status = "okay";
 
-	pca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		reg = <0x70>;
 	};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts
index 5a98a19f445e..7a78c34cff40 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts
@@ -123,10 +123,6 @@
 	status = "okay";
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &pwm_tacho {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts
index d5b7d28cda88..da55e7b29fac 100644
--- a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts
@@ -118,10 +118,6 @@
 	status = "okay";
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &pwm_tacho {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts
new file mode 100644
index 000000000000..ec82af94e1fb
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 Inventec Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "STARSCREAM BMC";
+	compatible = "inventec,starscream-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-uid {
+			label = "UID_LED";
+			gpios = <&gpio0 186 GPIO_ACTIVE_LOW>;
+		};
+
+		led-heartbeat {
+			label = "HB_LED";
+			gpios = <&gpio0 127 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc2";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+&i2c1 {
+	status = "okay";
+};
+&i2c2 {
+	status = "okay";
+};
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	// I2C EXPANDER
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// AMD SB-TSI CPU1
+			sbtsi@4c {
+				compatible = "amd,sbtsi";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			// AMD SB-TSI CPU2
+			sbtsi@48 {
+				compatible = "amd,sbtsi";
+				reg = <0x48>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	// I2C EXPANDER U153
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		usb_hub: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		riser1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		riser2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	// Motherboard Temp_U89
+	temperature-sensor@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+
+	// RunBMC Temp_U6
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	// I2C EXPANDER U40
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	// FRU RunBMC
+	eeprom@51 {
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+		pagesize = <128>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+	// FRU SCM
+	eeprom@51 {
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+		pagesize = <128>;
+	};
+
+	// SCM Temp_U17
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/   "","","","","","","","",
+	/*B0-B7*/   "alert-psu0-smb-r-n","bmc-ready","","assert-cpu0-prochot-r-n",
+	"","","","",
+	/*C0-C7*/   "","","","","","","","",
+	/*D0-D7*/   "","","","","","","","",
+	/*E0-E7*/   "","","","","","","","",
+	/*F0-F7*/   "","","","","reset-sgpio-r-n","","","",
+	/*G0-G7*/   "","","scm-jtag-mux-select","","","","","",
+	/*H0-H7*/   "","","","","reset-out","power-out","","",
+	/*I0-I7*/   "","","","","","","irq-bmc-cpu0-buf-nmi-n","",
+	/*J0-J7*/   "","","","","","","","",
+	/*K0-K7*/   "","","","","","","","",
+	/*L0-L7*/   "","","","","","","","",
+	/*M0-M7*/   "","","","","","","","",
+	/*N0-N7*/   "","","ncsi-ocp-clk-en-n","","","","","",
+	/*O0-O7*/   "","","","","","","cpu1-thermal-trip-n","",
+	/*P0-P7*/   "","","","","","","","",
+	/*Q0-Q7*/   "cpu0-prochot-n","","cpu1-prochot-n","","cpu0-pe-rst0","","","",
+	/*R0-R7*/   "","","","","","","","",
+	/*S0-S7*/   "","","","",
+	"","PCH_SLP_S4_BMC_N","cpu0-thermtrip-n","alert-psu1-smb-r-n",
+	/*T0-T7*/   "","","","","","","","",
+	/*U0-U7*/   "","","","","","","","",
+	/*V0-V7*/   "bios-recovery-buf-n","","assert-cpu1-prochot-r-n","",
+	"power-chassis-good","","","",
+	/*W0-W7*/   "","","","","","","","",
+	/*X0-X7*/   "","","","","platform-type","","","",
+	/*Y0-Y7*/   "","","","","","","","",
+	/*Z0-Z7*/   "","cpld-power-break-n","","","","","","",
+	/*AA0-AA7*/ "","","","","","","","",
+	/*AB0-AB7*/ "","","","","","","","",
+	/*AC0-AC7*/ "","","","","","","","";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <64>;
+	bus-frequency = <1000000>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+	non-removable;
+	max-frequency = <52000000>;
+	bus-width = <8>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+	aspeed,vhub-downstream-ports = <7>;
+	aspeed,vhub-generic-endpoints = <21>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb2ad_default>;
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
index caf66651e5b5..c713cb7a6187 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
@@ -193,14 +193,14 @@
        // I2C EXPANDER
        status = "okay";
 
-       i2c-switch@71 {
+       i2c-mux@71 {
                compatible = "nxp,pca9544";
                #address-cells = <1>;
                #size-cells = <0>;
                reg = <0x71>;
        };
 
-       i2c-switch@73 {
+       i2c-mux@73 {
                compatible = "nxp,pca9544";
                #address-cells = <1>;
                #size-cells = <0>;
@@ -212,7 +212,7 @@
        // I2C EXPANDER
        status = "okay";
 
-       i2c-switch@70 {
+       i2c-mux@70 {
                compatible = "nxp,pca9544";
                #address-cells = <1>;
                #size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts
index 8f543cca7c21..4ad0f44af1ab 100644
--- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts
@@ -208,7 +208,7 @@
 	 *	Slot 3
 	 */
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9545";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -249,7 +249,7 @@
 	 *	Slot 2,
 	 *	Slot 3
 	 */
-	i2c-switch@76 {
+	i2c-mux@76 {
 		compatible = "nxp,pca9546";
 		reg = <0x76>;
 		#address-cells = <1>;
@@ -405,161 +405,161 @@
 
 &gpio {
 
-	pin_gpio_b5 {
+	pin-gpio-b5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
 	};
 
-	pin_gpio_f0 {
+	pin-gpio-f0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "IRQ_BMC_PCH_NMI_R";
 	};
 
-	pin_gpio_f3 {
+	pin-gpio-f3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "I2C_BUS0_RST_OUT_N";
 	};
 
-	pin_gpio_f4 {
+	pin-gpio-f4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "FM_SKT0_FAULT_LED";
 	};
 
-	pin_gpio_f5 {
+	pin-gpio-f5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "FM_SKT1_FAULT_LED";
 	};
 
-	pin_gpio_g4 {
+	pin-gpio-g4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FAN_PWR_CTL_N";
 	};
 
-	pin_gpio_g7 {
+	pin-gpio-g7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "RST_BMC_PCIE_I2CMUX_N";
 	};
 
-	pin_gpio_h2 {
+	pin-gpio-h2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PSU1_FFS_N_R";
 	};
 
-	pin_gpio_h3 {
+	pin-gpio-h3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PSU2_FFS_N_R";
 	};
 
-	pin_gpio_i3 {
+	pin-gpio-i3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_INTRUDED_COVER";
 	};
 
-	pin_gpio_j2 {
+	pin-gpio-j2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_BIOS_UPDATE_N";
 	};
 
-	pin_gpio_j3 {
+	pin-gpio-j3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "RST_BMC_HDD_I2CMUX_N";
 	};
 
-	pin_gpio_s2 {
+	pin-gpio-s2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_VGA_SW";
 	};
 
-	pin_gpio_s4 {
+	pin-gpio-s4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
 		output;
 		line-name = "VBAT_EN_N";
 	};
 
-	pin_gpio_s6 {
+	pin-gpio-s6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PU_BMC_GPIOS6";
 	};
 
-	pin_gpio_y0 {
+	pin-gpio-y0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BMC_NCSI_MUX_CTL_S0";
 	};
 
-	pin_gpio_y1 {
+	pin-gpio-y1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BMC_NCSI_MUX_CTL_S1";
 	};
 
-	pin_gpio_z0 {
+	pin-gpio-z0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "I2C_RISER2_INT_N";
 	};
 
-	pin_gpio_z2 {
+	pin-gpio-z2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "I2C_RISER2_RESET_N";
 	};
 
-	pin_gpio_z3 {
+	pin-gpio-z3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_PCH_SCI_LPC_N";
 	};
 
-	pin_gpio_z7 {
+	pin-gpio-z7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BMC_POST_CMPLT_N";
 	};
 
-	pin_gpio_aa0 {
+	pin-gpio-aa0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "HOST_BMC_USB_SEL";
 	};
 
-	pin_gpio_aa5 {
+	pin-gpio-aa5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
index bcc1820f5c07..fdcf4492fb4e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
@@ -151,7 +151,7 @@
 	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
 };
 
-&adc{
+&adc {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_adc0_default
@@ -175,7 +175,7 @@
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9545";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -211,7 +211,7 @@
 	status = "okay";
 	bus-frequency = <90000>;
 	HotSwap@10 {
-		compatible = "adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x10>;
 	};
 
@@ -227,7 +227,7 @@
 
 &i2c3 {
 	status = "okay";
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -425,238 +425,238 @@
 
 &gpio {
 
-	pin_gpio_a1 {
+	pin-gpio-a1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
 		output-high;
 		line-name = "BMC_EMMC_RST_N";
 	};
 
-	pin_gpio_a3 {
+	pin-gpio-a3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
 		output-high;
 		line-name = "PCH_PWROK_BMC_FPGA";
 	};
 
-	pin_gpio_b5 {
+	pin-gpio-b5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
 	};
 
-	pin_gpio_b7 {
+	pin-gpio-b7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
 		output-low;
 		line-name = "CPU_SM_WP";
 	};
 
-	pin_gpio_e0 {
+	pin-gpio-e0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "PDB_PSU_SEL";
 	};
 
-	pin_gpio_e2 {
+	pin-gpio-e2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(E, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "LOCATOR_LED_N";
 	};
 
-	pin_gpio_e5 {
+	pin-gpio-e5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_DBP_PRESENT_R1_N";
 	};
 
-	pin_gpio_e6 {
+	pin-gpio-e6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_ME_SECURITY_OVERRIDE_N";
 	};
 
-	pin_gpio_f0 {
+	pin-gpio-f0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "IRQ_BMC_PCH_NMI_R";
 	};
 
-	pin_gpio_f1 {
+	pin-gpio-f1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "CPU2_PROCDIS_BMC_N";
 	};
 
-	pin_gpio_f2 {
+	pin-gpio-f2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "RM_THROTTLE_EN_N";
 	};
 
-	pin_gpio_f3 {
+	pin-gpio-f3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "FM_PMBUS_ALERT_B_EN";
 	};
 
-	pin_gpio_f4 {
+	pin-gpio-f4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_FORCE_NM_THROTTLE_N";
 	};
 
-	pin_gpio_f6 {
+	pin-gpio-f6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_CPU_PWR_DEBUG_N";
 	};
 
-	pin_gpio_g7 {
+	pin-gpio-g7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_PCIE_I2C_MUX_RST_N";
 	};
 
-	pin_gpio_h6 {
+	pin-gpio-h6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_DBP_PRESENT_R2_N";
 	};
 
-	pin_gpio_i3 {
+	pin-gpio-i3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SPI_BMC_BIOS_WP_N";
 	};
 
-	pin_gpio_j1 {
+	pin-gpio-j1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_USB_SEL";
 	};
 
-	pin_gpio_j2 {
+	pin-gpio-j2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PDB_SMB_RST_N";
 	};
 
-	pin_gpio_j3 {
+	pin-gpio-j3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SPI_BMC_BIOS_HOLD_N";
 	};
 
-	pin_gpio_l0 {
+	pin-gpio-l0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PDB_FAN_TACH_SEL";
 	};
 
-	pin_gpio_l1 {
+	pin-gpio-l1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SYS_RESET_BMC_FPGA_N";
 	};
 
-	pin_gpio_l4 {
+	pin-gpio-l4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_EFUSE_FAN_G1_EN";
 	};
 
-	pin_gpio_l5 {
+	pin-gpio-l5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_EFUSE_FAN_G2_EN";
 	};
 
-	pin_gpio_r6 {
+	pin-gpio-r6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "CPU3_PROCDIS_BMC_N";
 	};
 
-	pin_gpio_r7 {
+	pin-gpio-r7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "CPU4_PROCDIS_BMC_N";
 	};
 
-	pin_gpio_s1 {
+	pin-gpio-s1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "DBP_SYSPWROK_BMC";
 	};
 
-	pin_gpio_s2 {
+	pin-gpio-s2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PCH_RST_RSMRST_N";
 	};
 
-	pin_gpio_s6 {
+	pin-gpio-s6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_HW_STRAP_5";
 	};
 
-	pin_gpio_z3 {
+	pin-gpio-z3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_PCH_SCI_LPC_N";
 	};
 
-	pin_gpio_aa0 {
+	pin-gpio-aa0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "FW_PSU_ALERT_EN_N";
 	};
 
-	pin_gpio_aa4 {
+	pin-gpio-aa4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "DBP_CPU_PREQ_N";
 	};
 
-	pin_gpio_ab3 {
+	pin-gpio-ab3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AB, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BMC_WDTRST";
 	};
 
-	pin_gpio_ac6 {
+	pin-gpio-ac6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AC, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-microsoft-olympus.dts
index 3ef8358ff764..3ef8358ff764 100644
--- a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-microsoft-olympus.dts
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
new file mode 100644
index 000000000000..4de38613b0ea
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
@@ -0,0 +1,1178 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "AST2600 GB200NVL BMC";
+	compatible = "nvidia,gb200nvl-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial2 = &uart3;
+		serial4 = &uart5;
+		i2c16   = &imux16;
+		i2c17   = &imux17;
+		i2c18   = &imux18;
+		i2c19   = &imux19;
+		i2c20   = &imux20;
+		i2c21   = &imux21;
+		i2c22   = &imux22;
+		i2c23   = &imux23;
+		i2c24   = &imux24;
+		i2c25   = &imux25;
+		i2c26   = &imux26;
+		i2c27   = &imux27;
+		i2c28   = &imux28;
+		i2c29   = &imux29;
+		i2c30   = &imux30;
+		i2c31   = &imux31;
+		i2c32   = &imux32;
+		i2c33   = &imux33;
+		i2c34   = &imux34;
+		i2c35   = &imux35;
+		i2c36   = &imux36;
+		i2c37   = &imux37;
+		i2c38   = &imux38;
+		i2c39   = &imux39;
+		i2c40	= &e1si2c0;
+		i2c41	= &e1si2c1;
+		i2c42	= &e1si2c2;
+		i2c43	= &e1si2c3;
+		i2c44	= &e1si2c4;
+		i2c45	= &e1si2c5;
+		i2c46	= &e1si2c6;
+		i2c47	= &e1si2c7;
+		i2c48	= &i2c17mux0;
+		i2c49	= &i2c17mux1;
+		i2c50	= &i2c17mux2;
+		i2c51	= &i2c17mux3;
+		i2c52	= &i2c25mux0;
+		i2c53	= &i2c25mux1;
+		i2c54	= &i2c25mux2;
+		i2c55	= &i2c25mux3;
+		i2c56	= &i2c29mux0;
+		i2c57	= &i2c29mux1;
+		i2c58	= &i2c29mux2;
+		i2c59	= &i2c29mux3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		ramoops@a0000000 {
+			compatible = "ramoops";
+			reg = <0xa0000000 0x100000>; /* 1MB */
+			record-size = <0x10000>; /* 64KB */
+			max-reason = <2>; /* KMSG_DUMP_OOPS */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "uid_led";
+			gpios = <&sgpiom0 27 GPIO_ACTIVE_LOW>;
+		};
+		led-1 {
+			label = "fault_led";
+			gpios = <&sgpiom0 29 GPIO_ACTIVE_LOW>;
+		};
+		led-2 {
+			label = "power_led";
+			gpios = <&sgpiom0 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	buttons {
+		button-power {
+			label = "power-btn";
+			gpio = <&sgpiom0 156 GPIO_ACTIVE_LOW>;
+		};
+		button-uid {
+			label = "uid-btn";
+			gpio = <&sgpiom0 154 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	standby_power_regulator: standby-power-regulator {
+		status = "okay";
+		compatible = "regulator-fixed";
+		regulator-name = "standby_power";
+		gpio = <&gpio0 ASPEED_GPIO(M, 3) GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+// Enable Primary flash on FMC for bring up activity
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		compatible = "jedec,spi-nor";
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u-boot@0 {
+				// 896KB
+				reg = <0x0 0xe0000>;
+				label = "u-boot";
+			};
+
+			kernel@100000 {
+				// 9MB
+				reg = <0x100000 0x900000>;
+				label = "kernel";
+			};
+
+			rofs@a00000 {
+				// 55292KB (extends to end of 64MB SPI - 4KB)
+				reg = <0xa00000 0x35FF000>;
+				label = "rofs";
+			};
+		};
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	// Data SPI is 64MB in size
+	flash@0 {
+		status = "okay";
+		label = "config";
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u-boot-env@0 {
+				// 256KB
+				reg = <0x0 0x40000>;
+				label = "u-boot-env";
+			};
+
+			rwfs@40000 {
+				// 16MB
+				reg = <0x40000 0x1000000>;
+				label = "rwfs";
+			};
+
+			log@1040000 {
+				// 40MB
+				reg = <0x1040000 0x2800000>;
+				label = "log";
+			};
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	// Enabling SOL
+	status = "okay";
+};
+
+&uart5 {
+	// BMC Debug Console
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+	ethphy3: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <2>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+};
+
+/*
+ * Enable USB port A as device (via the virtual hub) to host
+ */
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+// USB 2.0 to HMC, on USB Port B
+&ehci1 {
+	status = "okay";
+};
+
+// USB 1.0
+&uhci {
+	status = "okay";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"RUN_POWER_FAULT_L-I","SYS_RST_IN_L-O",
+		"RUN_POWER_PG-I","PWR_BRAKE_L-O",
+		"SYS_RST_OUT_L-I","RUN_POWER_EN-O",
+		"L0L1_RST_REQ_OUT_L-I","SHDN_FORCE_L-O",
+		"L2_RST_REQ_OUT_L-I","SHDN_REQ_L-O",
+		"SHDN_OK_L-I","UID_LED_N-O",
+		"BMC_I2C1_FPGA_ALERT_L-I","SYS_FAULT_LED_N-O",
+		"BMC_I2C0_FPGA_ALERT_L-I","PWR_LED_N-O",
+		"FPGA_RSVD_FFU3-I","",
+		"FPGA_RSVD_FFU2-I","",
+		"FPGA_RSVD_FFU1-I","",
+		"FPGA_RSVD_FFU0-I","BMC_I2C_SSIF_ALERT_L-O",
+		"CPU_BOOT_DONE-I","JTAG_MUX_SELECT-O",
+		"SPI_BMC_FPGA_INT_L-I","RTC_CLR_L-O",
+		"THERM_BB_WARN_L-I","UART_MUX_SEL-O",
+		"THERM_BB_OVERT_L-I","",
+		"CPU0_UPHY3_PRSNT1_L-I","IOBRD0_RUN_POWER_EN-O",
+		"CPU0_UPHY3_PRSNT0_L-I","IOBRD1_RUN_POWER_EN-O",
+		"CPU0_UPHY2_PRSNT1_L-I","FPGA_RSVD_FFU4-O",
+		"CPU0_UPHY2_PRSNT0_L-I","FPGA_RSVD_FFU5-O",
+		"CPU0_UPHY1_PRSNT1_L-I","FPGA_RSVD_FFU6-O",
+		"CPU0_UPHY1_PRSNT0_L-I","FPGA_RSVD_FFU7-O",
+		"CPU0_UPHY0_PRSNT1_L-I","RSVD_NV_PLT_DETECT-O",
+		"CPU0_UPHY0_PRSNT0_L-I","SPI1_INT_L-O",
+		"CPU1_UPHY3_PRSNT1_L-I","",
+		"CPU1_UPHY3_PRSNT0_L-I","HMC_EROT_MUX_STATUS",
+		"CPU1_UPHY2_PRSNT1_L-I","",
+		"CPU1_UPHY2_PRSNT0_L-I","",
+		"CPU1_UPHY1_PRSNT1_L-I","",
+		"CPU1_UPHY1_PRSNT0_L-I","",
+		"CPU1_UPHY0_PRSNT1_L-I","",
+		"CPU1_UPHY0_PRSNT0_L-I","",
+		"FAN1_PRESENT_L-I","",
+		"FAN0_PRESENT_L-I","",
+		"","",
+		"IPEX_CABLE_PRSNT_L-I","",
+		"M2_1_PRSNT_L-I","",
+		"M2_0_PRSNT_L-I","",
+		"CPU1_UPHY4_PRSNT1_L-I","",
+		"CPU0_UPHY4_PRSNT0_L-I","",
+		"","",
+		"I2C_RTC_ALERT_L-I","",
+		"FAN7_PRESENT_L-I","",
+		"FAN6_PRESENT_L-I","",
+		"FAN5_PRESENT_L-I","",
+		"FAN4_PRESENT_L-I","",
+		"FAN3_PRESENT_L-I","",
+		"FAN2_PRESENT_L-I","",
+		"IOBRD0_IOX_INT_L-I","",
+		"IOBRD1_PRSNT_L-I","",
+		"IOBRD0_PRSNT_L-I","",
+		"IOBRD1_PWR_GOOD-I","",
+		"IOBRD0_PWR_GOOD-I","",
+		"","",
+		"","",
+		"FAN_FAIL_IN_L-I","",
+		"","",
+		"","",
+		"","",
+		"PDB_CABLE_PRESENT_L-I","",
+		"","",
+		"CHASSIS_PWR_BRK_L-I","",
+		"","",
+		"IOBRD1_IOX_INT_L-I","",
+		"10GBE_SMBALRT_L-I","",
+		"PCIE_WAKE_L-I","",
+		"I2C_M21_ALERT_L-I","",
+		"I2C_M20_ALERT_L-I","",
+		"TRAY_FAST_SHDN_L-I","",
+		"UID_BTN_N-I","",
+		"PWR_BTN_L-I","",
+		"PSU_SMB_ALERT_L-I","",
+		"","",
+		"","",
+		"NODE_LOC_ID[0]-I","",
+		"NODE_LOC_ID[1]-I","",
+		"NODE_LOC_ID[2]-I","",
+		"NODE_LOC_ID[3]-I","",
+		"NODE_LOC_ID[4]-I","",
+		"NODE_LOC_ID[5]-I","",
+		"FAN10_PRESENT_L-I","",
+		"FAN9_PRESENT_L-I","",
+		"FAN8_PRESENT_L-I","",
+		"FPGA1_READY_HMC-I","",
+		"DP_HPD-I","",
+		"HMC_I2C3_FPGA_ALERT_L-I","",
+		"HMC_I2C2_FPGA_ALERT_L-I","",
+		"FPGA0_READY_HMC-I","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"LEAK_DETECT_ALERT_L-I","",
+		"MOD1_B2B_CABLE_PRESENT_L-I","",
+		"MOD1_CLINK_CABLE_PRESENT_L-I","",
+		"FAN11_PRESENT_L-I","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"RSVD_SGPIO_IN_CRC[0]","RSVD_SGPIO_O_CRC[7]",
+		"RSVD_SGPIO_IN_CRC[1]","RSVD_SGPIO_O_CRC[6]",
+		"RSVD_SGPIO_IN_CRC[2]","RSVD_SGPIO_O_CRC[5]",
+		"RSVD_SGPIO_IN_CRC[3]","RSVD_SGPIO_O_CRC[4]",
+		"RSVD_SGPIO_IN_CRC[4]","RSVD_SGPIO_O_CRC[3]",
+		"RSVD_SGPIO_IN_CRC[5]","RSVD_SGPIO_O_CRC[2]",
+		"RSVD_SGPIO_IN_CRC[6]","RSVD_SGPIO_O_CRC[1]",
+		"RSVD_SGPIO_IN_CRC[7]","RSVD_SGPIO_O_CRC[0]";
+};
+
+// I2C1, SSIF IPMI interface
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+// I2C2
+// BMC_I2C1_FPGA - Secondary FPGA
+// HMC EROT
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+};
+
+// I2C3
+// BMC_I2C0_FPGA - Primary FPGA
+// HMC FRU EEPROM
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+};
+
+// I2C4
+&i2c3 {
+	status = "okay";
+};
+
+// I2C5
+// RTC Driver
+// IO Expander
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	// Module 0, Expander @0x21
+	exp4: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"RTC_MUX_SEL-O",
+			"PCI_MUX_SEL-O",
+			"TPM_MUX_SEL-O",
+			"FAN_MUX-SEL-O",
+			"SGMII_MUX_SEL-O",
+			"DP_MUX_SEL-O",
+			"UPHY3_USB_SEL-O",
+			"NCSI_MUX_SEL-O",
+			"BMC_PHY_RST-O",
+			"RTC_CLR_L-O",
+			"BMC_12V_CTRL-O",
+			"PS_RUN_IO0_PG-I",
+			"",
+			"",
+			"",
+			"";
+	};
+};
+
+// I2C6
+// Module 0/1 I2C MUX x3
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				i2c17mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c17mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c17mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c17mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux20: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux21: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				vcc-supply = <&standby_power_regulator>;
+				gpio-line-names =
+					"RST_CX_0_L-O",
+					"RST_CX_1_L-O",
+					"CX0_SSD0_PRSNT_L-I",
+					"CX1_SSD1_PRSNT_L-I",
+					"CX_BOOT_CMPLT_CX0-I",
+					"CX_BOOT_CMPLT_CX1-I",
+					"CX_TWARN_CX0_L-I",
+					"CX_TWARN_CX1_L-I",
+					"CX_OVT_SHDN_CX0-I",
+					"CX_OVT_SHDN_CX1-I",
+					"FNP_L_CX0-O",
+					"FNP_L_CX1-O",
+					"",
+					"MCU_GPIO-I",
+					"MCU_RST_N-O",
+					"MCU_RECOVERY_N-O";
+			};
+		};
+
+		imux22: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux23: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x73>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+				vdd-supply = <&standby_power_regulator>;
+
+				i2c25mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c25mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c25mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c25mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				i2c29mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c29mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c29mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c29mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				vcc-supply = <&standby_power_regulator>;
+				gpio-line-names =
+					"SEC_RST_CX_0_L-O",
+					"SEC_RST_CX_1_L-O",
+					"SEC_CX0_SSD0_PRSNT_L-I",
+					"SEC_CX1_SSD1_PRSNT_L-I",
+					"SEC_CX_BOOT_CMPLT_CX0-I",
+					"SEC_CX_BOOT_CMPLT_CX1-I",
+					"SEC_CX_TWARN_CX0_L-I",
+					"SEC_CX_TWARN_CX1_L-I",
+					"SEC_CX_OVT_SHDN_CX0-I",
+					"SEC_CX_OVT_SHDN_CX1-I",
+					"SEC_FNP_L_CX0-O",
+					"SEC_FNP_L_CX1-O",
+					"",
+					"SEC_MCU_GPIO-I",
+					"SEC_MCU_RST_N-O",
+					"SEC_MCU_RECOVERY_N-O";
+				};
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux36: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux37: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux38: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux39: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+// I2C7
+// Module 0/1 Leak Sensors
+// Module 0/1 Fan Controllers
+&i2c6 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pmic@12 {
+		compatible = "ti,lm5066i";
+		reg = <0x12>;
+		shunt-resistor-micro-ohms = <190>;
+		status = "okay";
+	};
+
+	pmic@14 {
+		compatible = "ti,lm5066i";
+		reg = <0x14>;
+		shunt-resistor-micro-ohms = <190>;
+		status = "okay";
+	};
+
+	pwm@20 {
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	pwm@23 {
+		compatible = "maxim,max31790";
+		reg = <0x23>;
+	};
+
+	pwm@2c {
+		compatible = "maxim,max31790";
+		reg = <0x2c>;
+	};
+
+	pwm@2f {
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+};
+
+// I2C9
+// M.2
+&i2c8 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+};
+
+// I2C10
+// HMC IO Expander
+// Module 0/1 IO Expanders
+&i2c9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	// Module 0, Expander @0x20
+	exp0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"FPGA_THERM_OVERT_L-I",
+			"FPGA_READY_BMC-I",
+			"HMC_BMC_DETECT-O",
+			"HMC_PGOOD-O",
+			"",
+			"BMC_STBY_CYCLE-O",
+			"FPGA_EROT_FATAL_ERROR_L-I",
+			"WP_HW_EXT_CTRL_L-O",
+			"EROT_FPGA_RST_L-O",
+			"FPGA_EROT_RECOVERY_L-O",
+			"BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"USB_HUB_RESET_L-O",
+			"NCSI_CS1_SEL-O",
+			"SGPIO_EN_L-O",
+			"B2B_IOEXP_INT_L-I",
+			"I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// Module 1, Expander @0x21
+	exp1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"SEC_FPGA_THERM_OVERT_L-I",
+			"SEC_FPGA_READY_BMC-I",
+			"",
+			"",
+			"",
+			"",
+			"SEC_FPGA_EROT_FATAL_ERROR_L-I",
+			"SEC_WP_HW_EXT_CTRL_L-O",
+			"SEC_EROT_FPGA_RST_L-O",
+			"SEC_FPGA_EROT_RECOVERY_L-O",
+			"SEC_BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"SEC_USB2_HUB_RST_L-O",
+			"",
+			"",
+			"",
+			"SEC_I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// HMC Expander @0x27
+	exp2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"HMC_PRSNT_L-I",
+			"HMC_READY-I",
+			"HMC_EROT_FATAL_ERROR_L-I",
+			"I2C_MUX_SEL-O",
+			"HMC_EROT_SPI_MUX_SEL-O",
+			"HMC_EROT_RECOVERY_L-O",
+			"HMC_EROT_RST_L-O",
+			"GLOBAL_WP_HMC-O",
+			"FPGA_RST_L-O",
+			"USB2_HUB_RST-O",
+			"CPU_UART_MUX_SEL-O",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// HMC Expander @0x74
+	exp3: gpio@74 {
+		compatible = "nxp,pca9555";
+		reg = <0x74>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"IOB_PRSNT_L",
+			"IOB_DP_HPD",
+			"IOX_BMC_RESET",
+			"IOB_IOEXP_INT_L",
+			"IOB_UID_LED_L",
+			"IOB_UID_BTN_L",
+			"IOB_SYS_RST_BTN_L",
+			"IOB_PWR_LED_L",
+			"IOB_PWR_BTN_L",
+			"IOB_PHY_RST",
+			"CPLD_JTAG_MUX_SEL",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+};
+
+// I2C11
+// BMC FRU EEPROM
+// BMC Temp Sensor
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	// BMC FRU EEPROM - 256 bytes
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+// I2C12
+&i2c11 {
+	status = "disabled";
+};
+
+// I2C13
+&i2c12 {
+	status = "disabled";
+};
+
+// I2C14
+// Module 0 UPHY3 SMBus
+&i2c13 {
+	status = "disabled";
+};
+
+// I2C15
+// Module 1 UPHY3 SMBus
+&i2c14 {
+	status = "okay";
+	clock-frequency = <100000>;
+	multi-master;
+
+	//E1.S drive slot 0-3
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		e1si2c0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		e1si2c1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		e1si2c2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		e1si2c3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+// I2C16
+&i2c15 {
+	status = "okay";
+	clock-frequency = <100000>;
+	multi-master;
+
+	//E1.S drive slot 4-7
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		e1si2c4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		e1si2c5: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		e1si2c6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		e1si2c7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&rng {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/ "", "", "", "", "", "", "", "",
+		/*B0-B7*/ "", "", "", "", "", "", "", "",
+		/*C0-C7*/ "SGPIO_I2C_MUX_SEL-O", "", "", "", "", "", "", "",
+		/*D0-D7*/ "", "", "", "UART1_MUX_SEL-O", "", "FPGA_PEX_RST_L-O", "", "",
+		/*E0-E7*/ "RTL8221_PHY_RST_L-O", "RTL8211_PHY_INT_L-I",	"", "UART3_MUX_SEL-O",
+					"", "", "", "SGPIO_BMC_EN-O",
+		/*F0-F7*/ "", "", "", "", "", "", "", "",
+		/*G0-G7*/ "", "", "", "", "", "", "", "",
+		/*H0-H7*/ "", "", "", "", "", "", "", "",
+		/*I0-I7*/ "", "", "", "", "", "QSPI2_RST_L-O", "GLOBAL_WP_BMC-O", "BMC_DDR4_TEN-O",
+		/*J0-J7*/ "", "", "", "", "", "", "", "",
+		/*K0-K7*/ "", "", "", "", "", "", "", "",
+		/*L0-L7*/ "", "", "", "", "", "", "", "",
+		/*M0-M7*/ "PCIE_EP_RST_EN-O", "BMC_FRU_WP-O", "FPGA_RST_L-O", "STBY_POWER_EN-O",
+					"STBY_POWER_PG-I", "PCIE_EP_RST_L-O", "", "",
+		/*N0-N7*/ "", "", "", "", "", "", "", "",
+		/*O0-O7*/ "", "", "", "", "", "", "", "",
+		/*P0-P7*/ "", "", "", "", "", "", "", "",
+		/*Q0-Q7*/ "", "", "", "", "", "", "", "",
+		/*R0-R7*/ "", "", "", "", "", "", "", "",
+		/*S0-S7*/ "", "", "", "", "", "", "", "",
+		/*T0-T7*/ "", "", "", "", "", "", "", "",
+		/*U0-U7*/ "", "", "", "", "", "", "", "",
+		/*V0-V7*/ "AP_EROT_REQ-O", "EROT_AP_GNT-I", "", "","PCB_TEMP_ALERT-I", "","", "",
+		/*W0-W7*/ "", "", "", "", "", "", "", "",
+		/*X0-X7*/ "", "", "TPM_MUX_SEL-O", "", "", "", "", "",
+		/*Y0-Y7*/ "", "", "", "EMMC_RST-O", "","", "", "",
+		/*Z0-Z7*/ "BMC_READY-O","", "", "", "", "", "", "";
+};
+
+&gpio1 {
+	/* 36 1.8V GPIOs */
+	gpio-line-names =
+		/*A0-A7*/ "", "", "", "", "", "", "", "",
+		/*B0-B7*/ "", "", "", "", "", "", "IO_EXPANDER_INT_L-I","",
+		/*C0-C7*/ "", "", "", "", "", "", "", "",
+		/*D0-D7*/ "", "", "", "", "", "", "SPI_HOST_TPM_RST_L-O", "SPI_BMC_FPGA_INT_L-I",
+		/*E0-E7*/ "", "", "", "", "", "", "", "";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
index c0847636f20b..9f2ad551255d 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
@@ -52,18 +52,18 @@
 			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>;
 		};
 		bmc_err {
-			lable = "BMC_fault";
+			label = "BMC_fault";
 			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
 		};
 
 		sys_err {
-			lable = "Sys_fault";
+			label = "Sys_fault";
 			gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
 		};
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 
@@ -263,54 +263,50 @@
 	status = "okay";
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &gpio {
-	pin_gpio_b0 {
+	pin-gpio-b0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_HDD1_PWR_EN";
 	};
 
-	pin_gpio_b5 {
+	pin-gpio-b5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_USB1_OCI2";
 	};
 
-	pin_gpio_h5 {
+	pin-gpio-h5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_CP0_PERST_ENABLE_R";
 	};
 
-	pin_gpio_z2 {
+	pin-gpio-z2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "RST_PCA9546_U177_N";
 	};
 
-	pin_gpio_aa6 {
+	pin-gpio-aa6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_CP0_RESET_N";
 	};
 
-	pin_gpio_aa7 {
+	pin-gpio-aa7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_TPM_RESET_N";
 	};
 
-	pin_gpio_ab0 {
+	pin-gpio-ab0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
index 31ff19ef87a0..6c8b966ffccc 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
@@ -165,7 +165,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 		no-gpio-delays;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
index ac0d666ca10e..ce6d30ddf07c 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
@@ -77,10 +77,9 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		compatible = "aspeed,ast2500-cf-fsi-master";
 		#address-cells = <2>;
 		#size-cells = <0>;
-		no-gpio-delays;
 
 		memory-region = <&coldfire_memory>;
 		aspeed,sram = <&sram>;
@@ -248,27 +247,27 @@
 	/*AB0-AB7*/	"","","","","","","","",
 	/*AC0-AC7*/	"","","","","","","","";
 
-	func_mode0 {
+	func-mode0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-	func_mode1 {
+	func-mode1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-	func_mode2 {
+	func-mode2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-	seq_cont {
+	seq-cont-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-	ncsi_cfg {
+	ncsi-cfg-hog {
 		gpio-hog;
 		input;
 		gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>;
@@ -284,10 +283,6 @@
 	memory-region = <&gfx_memory>;
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &ibt {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
index 45631b47a7b3..7953059a6c67 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
@@ -55,7 +55,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "aspeed,ast2400-cf-fsi-master", "fsi-master";
+		compatible = "aspeed,ast2400-cf-fsi-master";
 		#address-cells = <2>;
 		#size-cells = <0>;
 
@@ -151,7 +151,7 @@
 	};
 
 	rtc@68 {
-		compatible = "dallas,ds3231";
+		compatible = "maxim,ds3231";
 		reg = <0x68>;
 	};
 };
@@ -209,140 +209,140 @@
 };
 
 &gpio {
-	pin_func_mode0 {
+	pin-func-mode0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "func_mode0";
 	};
 
-	pin_func_mode1 {
+	pin-func-mode1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(C, 5)  GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "func_mode1";
 	};
 
-	pin_func_mode2 {
+	pin-func-mode2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "func_mode2";
 	};
 
-	pin_gpio_a0 {
+	pin-gpio-a0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_FAN_RESERVED_N";
 	};
 
-	pin_gpio_a1 {
+	pin-gpio-a1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "APSS_WDT_N";
 	};
 
-	pin_gpio_b1 {
+	pin-gpio-b1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "APSS_BOOT_MODE";
 	};
 
-	pin_gpio_b2 {
+	pin-gpio-b2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "APSS_RESET_N";
 	};
 
-	pin_gpio_b7 {
+	pin-gpio-b7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SPIVID_STBY_RESET_N";
 	};
 
-	pin_gpio_d1 {
+	pin-gpio-d1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_POWER_UP";
 	};
 
-	pin_gpio_f1 {
+	pin-gpio-f1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_BATTERY_TEST";
 	};
 
-	pin_gpio_f4 {
+	pin-gpio-f4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "AST_HW_FAULT_N";
 	};
 
-	pin_gpio_f5 {
+	pin-gpio-f5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "AST_SYS_FAULT_N";
 	};
 
-	pin_gpio_f7 {
+	pin-gpio-f7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_FULL_SPEED_N";
 	};
 
-	pin_gpio_g3 {
+	pin-gpio-g3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_FAN_ERROR_N";
 	};
 
-	pin_gpio_g4 {
+	pin-gpio-g4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_WDT_RST1_P";
 	};
 
-	pin_gpio_g5 {
+	pin-gpio-g5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_WDT_RST2_P";
 	};
 
-	pin_gpio_h0 {
+	pin-gpio-h0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "PE_SLOT_TEST_EN_N";
 	};
 
-	pin_gpio_h1 {
+	pin-gpio-h1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_RTCRST_N";
 	};
 
-	pin_gpio_h2 {
+	pin-gpio-h2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SYS_PWROK_BMC";
 	};
 
-	pin_gpio_h7 {
+	pin-gpio-h7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
index 893e621ecab1..a0263d969e51 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
@@ -68,10 +68,9 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		compatible = "aspeed,ast2500-cf-fsi-master";
 		#address-cells = <2>;
 		#size-cells = <0>;
-		no-gpio-delays;
 
 		memory-region = <&coldfire_memory>;
 		aspeed,sram = <&sram>;
@@ -263,17 +262,17 @@
 	/*AB0-AB7*/	"","","","","","","","",
 	/*AC0-AC7*/	"","","","","","","","";
 
-	nic_func_mode0 {
+	nic-func-mode0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-	nic_func_mode1 {
+	nic-func-mode1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-	seq_cont {
+	seq-cont-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
 		output-low;
@@ -289,10 +288,6 @@
 	memory-region = <&gfx_memory>;
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &pwm_tacho {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
index 3f6010ef2b86..b31eb8e58c6b 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -456,7 +456,7 @@
 	status = "okay";
 
 	tpm: tpm@2e {
-		compatible = "tcg,tpm-tis-i2c";
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
 		reg = <0x2e>;
 	};
 };
@@ -870,11 +870,6 @@
 		    <&pinctrl_lsirq_default>;
 };
 
-&xdma {
-	status = "okay";
-	memory-region = <&vga_memory>;
-};
-
 &kcs2 {
 	status = "okay";
 	aspeed,lpc-io-reg = <0xca8 0xcac>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
index 8a7fb55ab489..8a7fb55ab489 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
index a20a532fc280..89907b628b65 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
@@ -173,7 +173,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 		no-gpio-delays;
@@ -661,10 +661,6 @@
 	memory-region = <&gfx_memory>;
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &wdt1 {
 	aspeed,reset-type = "none";
 	aspeed,external-signal;
@@ -696,9 +692,4 @@
 	memory-region = <&video_engine_memory>;
 };
 
-&xdma {
-	status = "okay";
-	memory-region = <&vga_memory>;
-};
-
 #include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
index 0cb7b20ff3ab..af3a9d39d277 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
@@ -64,7 +64,7 @@
 			linux,code = <ASPEED_GPIO(F, 7)>;
 		};
 
-		event-pcie-e2b-present{
+		event-pcie-e2b-present {
 			label = "pcie-e2b-present";
 			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(E, 7)>;
@@ -96,7 +96,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 		no-gpio-delays;
@@ -231,7 +231,7 @@
 &i2c1 {
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		reg = <0x71>;
 		#address-cells = <1>;
@@ -282,7 +282,7 @@
 &i2c4 {
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		reg = <0x71>;
 		#address-cells = <1>;
@@ -466,8 +466,6 @@
 };
 
 &pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-
 	pinctrl_gpioh_unbiased: gpioi_unbiased {
 		pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7";
 		bias-disable;
@@ -511,25 +509,25 @@
 	/*AB0-AB7*/	"","","","","","","","",
 	/*AC0-AC7*/	"","","","","","","","";
 
-	line_iso_u146_en {
+	line-iso-u146-en-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
 
-	ncsi_mux_en_n {
+	ncsi-mux-en-n-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
 
-	line_bmc_i2c2_sw_rst_n {
+	line-bmc-i2c2-sw-rst-n-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
 
-	line_bmc_i2c5_sw_rst_n {
+	line-bmc-i2c5-sw-rst-n-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-portwell-neptune.dts
index a5e64ccc2b3a..a5e64ccc2b3a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-portwell-neptune.dts
diff --git a/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts
index 259ef3f54c5c..259ef3f54c5c 100644
--- a/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts
index 9605e53f5bbf..fed2791f5994 100644
--- a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts
@@ -197,7 +197,7 @@
 	 *    Slot 6,
 	 *    Slot 7
 	 */
-	i2c-switch@74 {
+	i2c-mux@74 {
 		compatible = "nxp,pca9546";
 		reg = <0x74>;
 		#address-cells = <1>;
@@ -238,7 +238,7 @@
 	 *    SSD 1,
 	 *    SSD 2
 	 */
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -325,7 +325,7 @@
 	 *    PSU3
 	 *    PSU2
 	 */
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
index 46cbba6305b8..86451227847b 100644
--- a/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
@@ -285,7 +285,7 @@
 		reg = <0x4b>;
 	};
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -321,7 +321,7 @@
 &i2c1 {
 	status = "okay";
 
-	i2c-switch@59 {
+	i2c-mux@59 {
 		compatible = "nxp,pca9848";
 		reg = <0x59>;
 		#address-cells = <1>;
@@ -381,7 +381,7 @@
 			#size-cells = <0>;
 			reg = <5>;
 
-			U190_fru@51 {
+			eeprom@51 {
 				compatible = "atmel,24c128";
 				reg = <0x51>;
 				pagesize = <32>;
@@ -393,7 +393,7 @@
 			#size-cells = <0>;
 			reg = <7>;
 
-			i2c-switch@77 {
+			i2c-mux@77 {
 				compatible = "nxp,pca9546";
 				reg = <0x77>;
 				#address-cells = <1>;
@@ -460,7 +460,7 @@
 	status = "okay";
 
 	/* MB FRU (U173) @ 0xA2 */
-	mb_fru: mb_fru@51 {
+	mb_fru: eeprom@51 {
 		compatible = "atmel,24c128";
 		reg = <0x51>;
 		pagesize = <32>;
@@ -472,7 +472,7 @@
 		reg = <0x4a>;
 	};
 
-	FP_U4_fru@52 {
+	eeprom@52 {
 		compatible = "atmel,24c02";
 		reg = <0x52>;
 		pagesize = <16>;
@@ -490,7 +490,7 @@
 &i2c6 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -509,7 +509,7 @@
 			reg = <1>;
 
 			cpu0_pvccin@60 {
-				compatible = "isil,raa229004";
+				compatible = "renesas,raa229004";
 				reg = <0x60>;
 			};
 
@@ -530,7 +530,7 @@
 			reg = <2>;
 
 			cpu1_pvccin@72 {
-				compatible = "isil,raa229004";
+				compatible = "renesas,raa229004";
 				reg = <0x72>;
 			};
 
@@ -556,7 +556,7 @@
 &i2c7 {
 	status = "okay";
 
-	i2c-switch@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9546";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -593,7 +593,7 @@
 	status = "okay";
 
 	/* SCM FRU (U19) @ 0xA2 */
-	scm_fru: scm_fru@51 {
+	scm_fru: eeprom@51 {
 		compatible = "atmel,24c128";
 		reg = <0x51>;
 		pagesize = <32>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts
index 50f3c6a5c0c8..b961dff388d1 100644
--- a/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts
@@ -123,10 +123,6 @@
 	status = "okay";
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &pwm_tacho {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s7106.dts
index aff27c1d4b06..aff27c1d4b06 100644
--- a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s7106.dts
diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s8036.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s8036.dts
index 708ee78e4b83..f6c4549c0ac4 100644
--- a/arch/arm/boot/dts/aspeed-bmc-tyan-s8036.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s8036.dts
@@ -364,6 +364,7 @@
 &kcs3 {
 	status = "okay";
 	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 /* Enable BMC VGA output to show an early (pre-BIOS) boot screen */
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts
new file mode 100644
index 000000000000..7ab29129d1e4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2022 Ufispace Co., Ltd.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ufispace NCPLite BMC";
+	compatible = "ufispace,ncplite-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		fan-status-int-l {
+			label = "fan-status-int-l";
+			gpios = <&gpio0 ASPEED_GPIO(M, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(M, 2)>;
+		};
+
+		allpwr-good {
+			label = "allpwr-good";
+			gpios = <&gpio0 ASPEED_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(V, 4)>;
+		};
+
+		psu0-alert-n {
+			label = "psu0-alert-n";
+			gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 1)>;
+		};
+
+		psu1-alert-n {
+			label = "psu1-alert-n";
+			gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 2)>;
+		};
+
+		int-thermal-alert {
+			label = "int-thermal-alert";
+			gpios = <&gpio0 ASPEED_GPIO(P, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(P, 2)>;
+		};
+
+		cpu-caterr-l {
+			label = "cpu-caterr-l";
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(N, 3)>;
+		};
+
+		cpu-thermtrip-l {
+			label = "cpu-thermtrip-l";
+			gpios = <&gpio0 ASPEED_GPIO(V, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 5)>;
+		};
+
+		psu0-presence-l {
+			label = "psu0-presence-l";
+			gpios = <&gpio0 ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 6)>;
+		};
+
+		psu1-presence-l {
+			label = "psu1-presence-l";
+			gpios = <&gpio0 ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 7)>;
+		};
+
+		psu0-power-ok {
+			label = "psu0-power-ok";
+			gpios = <&gpio0 ASPEED_GPIO(M, 4) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(M, 4)>;
+		};
+
+		psu1-power-ok {
+			label = "psu1-power-ok";
+			gpios = <&gpio0 ASPEED_GPIO(M, 5) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(M, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&fan_ioexp 2 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&fan_ioexp 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan2-presence {
+			label = "fan2-presence";
+			gpios = <&fan_ioexp 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		fan3-presence {
+			label = "fan3-presence";
+			gpios = <&fan_ioexp 14 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+	};
+};
+
+&mac2 {
+	status = "okay";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_reset {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&udc {
+	status = "okay";
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	lm75@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	lm86@4c {
+		compatible = "national,lm86";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	lm75@4f {
+		cpmpatible = "national,lm75";
+		reg = <0x4f>;
+	};
+
+	fan_ioexp: pca9535@20 {
+		compatible = "nxp,pca9535";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"","","presence-fan0","",
+		"","","presence-fan1","",
+		"","","presence-fan2","",
+		"","","presence-fan3","";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <1>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <1>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"CPU_PWRGD","","","power-button","host0-ready","","presence-ps0","presence-ps1",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","reset-button","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"power-chassis-control0","power-chassis-control1","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","power-chassis-good","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman-n110.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts
index 24319267d550..44b9853f6e63 100644
--- a/arch/arm/boot/dts/aspeed-bmc-vegman-n110.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts
@@ -88,16 +88,16 @@
 
 &i2c13 {
 	/* SMB_PCIE2_STBY_LVC3 */
-	mux-expa@73 {
-		compatible = "nxp,pca9545";
-		reg = <0x73>;
+	i2c-mux@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		i2c-mux-idle-disconnect;
 	};
-	mux-sata@71 {
-		compatible = "nxp,pca9543";
-		reg = <0x71>;
+	i2c-mux@73 {
+		compatible = "nxp,pca9545";
+		reg = <0x73>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		i2c-mux-idle-disconnect;
@@ -106,7 +106,7 @@
 
 &i2c2 {
 	/* SMB_PCIE_STBY_LVC3 */
-	mux-expb@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9545";
 		reg = <0x71>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman-rx20.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts
index ebbb68b55559..98f3e0437704 100644
--- a/arch/arm/boot/dts/aspeed-bmc-vegman-rx20.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts
@@ -133,7 +133,7 @@
 
 &i2c13 {
 	/* SMB_PCIE2_STBY_LVC3 */
-	mux-expa@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -144,7 +144,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			rsra-mux@72 {
+			i2c-mux@72 {
 				compatible = "nxp,pca9548";
 				reg = <0x72>;
 				#address-cells = <1>;
@@ -154,7 +154,7 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <7>;
-					at24@50 {
+					eeprom@50 {
 						compatible = "atmel,24c64";
 						reg = <0x50>;
 						pagesize = <32>;
@@ -165,7 +165,7 @@
 			};
 		};
 	};
-	mux-sata@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9543";
 		reg = <0x71>;
 		#address-cells = <1>;
@@ -176,7 +176,7 @@
 
 &i2c2 {
 	/* SMB_PCIE_STBY_LVC3 */
-	mux-expb@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9548";
 		reg = <0x71>;
 		#address-cells = <1>;
@@ -187,7 +187,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
-			rsrb-mux@72 {
+			i2c-mux@72 {
 				compatible = "nxp,pca9548";
 				reg = <0x72>;
 				#address-cells = <1>;
@@ -196,7 +196,7 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <7>;
-					at24@50 {
+					eeprom@50 {
 						compatible = "atmel,24c64";
 						reg = <0x50>;
 						pagesize = <32>;
@@ -205,7 +205,7 @@
 					};
 				};
 			};
-			at24@50 {
+			eeprom@50 {
 				compatible = "atmel,24c64";
 				reg = <0x50>;
 				pagesize = <32>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman-sx20.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts
index e36ee4704994..933ca831d375 100644
--- a/arch/arm/boot/dts/aspeed-bmc-vegman-sx20.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts
@@ -88,16 +88,16 @@
 
 &i2c13 {
 	/* SMB_PCIE2_STBY_LVC3 */
-	mux-expa@73 {
-		compatible = "nxp,pca9545";
-		reg = <0x73>;
+	i2c-mux@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		i2c-mux-idle-disconnect;
 	};
-	mux-sata@71 {
-		compatible = "nxp,pca9543";
-		reg = <0x71>;
+	i2c-mux@73 {
+		compatible = "nxp,pca9545";
+		reg = <0x73>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		i2c-mux-idle-disconnect;
@@ -106,7 +106,7 @@
 
 &i2c2 {
 	/* SMB_PCIE_STBY_LVC3 */
-	mux-expb@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9545";
 		reg = <0x71>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
index 1a5b25b2ea29..8c953e3a1d41 100644
--- a/arch/arm/boot/dts/aspeed-bmc-vegman.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
@@ -30,7 +30,7 @@
 			reusable;
 		};
 
-		ramoops@9eff0000{
+		ramoops@9eff0000 {
 			compatible = "ramoops";
 			reg = <0x9eff0000 0x10000>;
 			record-size = <0x2000>;
@@ -291,7 +291,7 @@
 	/* SMB_BMC_MGMT_LVC3 */
 	status = "okay";
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 		pagesize = <32>;
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index 530491ae5eb2..c3d4d916c69b 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -122,8 +122,8 @@
 			reg = <0x1e6c0080 0x80>;
 		};
 
-		cvic: copro-interrupt-controller@1e6c2000 {
-			compatible = "aspeed,ast2400-cvic", "aspeed-cvic";
+		cvic: interrupt-controller@1e6c2000 {
+			compatible = "aspeed,ast2400-cvic", "aspeed,cvic";
 			valid-sources = <0x7fffffff>;
 			reg = <0x1e6c2000 0x80>;
 		};
@@ -230,6 +230,9 @@
 			sram: sram@1e720000 {
 				compatible = "mmio-sram";
 				reg = <0x1e720000 0x8000>;	// 32K
+				ranges;
+				#address-cells = <1>;
+				#size-cells = <1>;
 			};
 
 			video: video@1e700000 {
@@ -353,7 +356,6 @@
 			lpc: lpc@1e789000 {
 				compatible = "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
-				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -463,10 +465,9 @@
 		interrupt-controller;
 	};
 
-	i2c0: i2c-bus@40 {
+	i2c0: i2c@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -479,10 +480,9 @@
 		/* Does not need pinctrl properties */
 	};
 
-	i2c1: i2c-bus@80 {
+	i2c1: i2c@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -495,10 +495,9 @@
 		/* Does not need pinctrl properties */
 	};
 
-	i2c2: i2c-bus@c0 {
+	i2c2: i2c@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -512,10 +511,9 @@
 		status = "disabled";
 	};
 
-	i2c3: i2c-bus@100 {
+	i2c3: i2c@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -529,10 +527,9 @@
 		status = "disabled";
 	};
 
-	i2c4: i2c-bus@140 {
+	i2c4: i2c@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -546,10 +543,9 @@
 		status = "disabled";
 	};
 
-	i2c5: i2c-bus@180 {
+	i2c5: i2c@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -563,10 +559,9 @@
 		status = "disabled";
 	};
 
-	i2c6: i2c-bus@1c0 {
+	i2c6: i2c@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -580,10 +575,9 @@
 		status = "disabled";
 	};
 
-	i2c7: i2c-bus@300 {
+	i2c7: i2c@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -597,10 +591,9 @@
 		status = "disabled";
 	};
 
-	i2c8: i2c-bus@340 {
+	i2c8: i2c@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -614,10 +607,9 @@
 		status = "disabled";
 	};
 
-	i2c9: i2c-bus@380 {
+	i2c9: i2c@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -631,10 +623,9 @@
 		status = "disabled";
 	};
 
-	i2c10: i2c-bus@3c0 {
+	i2c10: i2c@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -648,10 +639,9 @@
 		status = "disabled";
 	};
 
-	i2c11: i2c-bus@400 {
+	i2c11: i2c@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -665,10 +655,9 @@
 		status = "disabled";
 	};
 
-	i2c12: i2c-bus@440 {
+	i2c12: i2c@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -682,10 +671,9 @@
 		status = "disabled";
 	};
 
-	i2c13: i2c-bus@480 {
+	i2c13: i2c@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index c89092c3905b..39500bdb4747 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -139,8 +139,8 @@
 			reg = <0x1e6c0080 0x80>;
 		};
 
-		cvic: copro-interrupt-controller@1e6c2000 {
-			compatible = "aspeed,ast2500-cvic", "aspeed-cvic";
+		cvic: interrupt-controller@1e6c2000 {
+			compatible = "aspeed,ast2500-cvic", "aspeed,cvic";
 			valid-sources = <0xffffffff>;
 			copro-sw-interrupts = <1>;
 			reg = <0x1e6c2000 0x80>;
@@ -262,10 +262,17 @@
 				quality = <100>;
 			};
 
+			hace: crypto@1e6e3000 {
+				compatible = "aspeed,ast2500-hace";
+				reg = <0x1e6e3000 0x100>;
+				interrupts = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+				resets = <&syscon ASPEED_RESET_HACE>;
+			};
+
 			gfx: display@1e6e6000 {
 				compatible = "aspeed,ast2500-gfx", "syscon";
 				reg = <0x1e6e6000 0x1000>;
-				reg-io-width = <4>;
 				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
 				resets = <&syscon ASPEED_RESET_CRT1>;
 				syscon = <&syscon>;
@@ -273,17 +280,6 @@
 				interrupts = <0x19>;
 			};
 
-			xdma: xdma@1e6e7000 {
-				compatible = "aspeed,ast2500-xdma";
-				reg = <0x1e6e7000 0x100>;
-				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
-				resets = <&syscon ASPEED_RESET_XDMA>;
-				interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>;
-				aspeed,pcie-device = "bmc";
-				aspeed,scu = <&syscon>;
-				status = "disabled";
-			};
-
 			adc: adc@1e6e9000 {
 				compatible = "aspeed,ast2500-adc";
 				reg = <0x1e6e9000 0xb0>;
@@ -306,6 +302,9 @@
 			sram: sram@1e720000 {
 				compatible = "mmio-sram";
 				reg = <0x1e720000 0x9000>;	// 36K
+				ranges;
+				#address-cells = <1>;
+				#size-cells = <1>;
 			};
 
 			sdmmc: sd-controller@1e740000 {
@@ -355,6 +354,7 @@
 				interrupts = <40>;
 				reg = <0x1e780200 0x0100>;
 				clocks = <&syscon ASPEED_CLK_APB>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -440,7 +440,6 @@
 			lpc: lpc@1e789000 {
 				compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
-				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -583,10 +582,9 @@
 		interrupt-controller;
 	};
 
-	i2c0: i2c-bus@40 {
+	i2c0: i2c@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -599,10 +597,9 @@
 		/* Does not need pinctrl properties */
 	};
 
-	i2c1: i2c-bus@80 {
+	i2c1: i2c@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -615,10 +612,9 @@
 		/* Does not need pinctrl properties */
 	};
 
-	i2c2: i2c-bus@c0 {
+	i2c2: i2c@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -632,10 +628,9 @@
 		status = "disabled";
 	};
 
-	i2c3: i2c-bus@100 {
+	i2c3: i2c@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -649,10 +644,9 @@
 		status = "disabled";
 	};
 
-	i2c4: i2c-bus@140 {
+	i2c4: i2c@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -666,10 +660,9 @@
 		status = "disabled";
 	};
 
-	i2c5: i2c-bus@180 {
+	i2c5: i2c@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -683,10 +676,9 @@
 		status = "disabled";
 	};
 
-	i2c6: i2c-bus@1c0 {
+	i2c6: i2c@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -700,10 +692,9 @@
 		status = "disabled";
 	};
 
-	i2c7: i2c-bus@300 {
+	i2c7: i2c@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -717,10 +708,9 @@
 		status = "disabled";
 	};
 
-	i2c8: i2c-bus@340 {
+	i2c8: i2c@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -734,10 +724,9 @@
 		status = "disabled";
 	};
 
-	i2c9: i2c-bus@380 {
+	i2c9: i2c@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -751,10 +740,9 @@
 		status = "disabled";
 	};
 
-	i2c10: i2c-bus@3c0 {
+	i2c10: i2c@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -768,10 +756,9 @@
 		status = "disabled";
 	};
 
-	i2c11: i2c-bus@400 {
+	i2c11: i2c@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -785,10 +772,9 @@
 		status = "disabled";
 	};
 
-	i2c12: i2c-bus@440 {
+	i2c12: i2c@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -802,10 +788,9 @@
 		status = "disabled";
 	};
 
-	i2c13: i2c-bus@480 {
+	i2c13: i2c@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
index 7cd4f075e325..e87c4b58994a 100644
--- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
@@ -297,6 +297,16 @@
 		groups = "I2C9";
 	};
 
+	pinctrl_i3c1_default: i3c1_default {
+		function = "I3C1";
+		groups = "I3C1";
+	};
+
+	pinctrl_i3c2_default: i3c2_default {
+		function = "I3C2";
+		groups = "I3C2";
+	};
+
 	pinctrl_i3c3_default: i3c3_default {
 		function = "I3C3";
 		groups = "I3C3";
@@ -402,6 +412,16 @@
 		groups = "MDIO4";
 	};
 
+	pinctrl_ncsi3_default: ncsi3_default {
+		function = "RMII3";
+		groups = "NCSI3";
+	};
+
+	pinctrl_ncsi4_default: ncsi4_default {
+		function = "RMII4";
+		groups = "NCSI4";
+	};
+
 	pinctrl_ncts1_default: ncts1_default {
 		function = "NCTS1";
 		groups = "NCTS1";
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 6660564855ff..f8662c8ac089 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -36,6 +36,10 @@
 		serial4 = &uart5;
 		serial5 = &vuart1;
 		serial6 = &vuart2;
+		mdio0 = &mdio0;
+		mdio1 = &mdio1;
+		mdio2 = &mdio2;
+		mdio3 = &mdio3;
 	};
 
 
@@ -94,6 +98,11 @@
 			    <0x40466000 0x2000>;
 			};
 
+		ahbc: bus@1e600000 {
+			compatible = "aspeed,ast2600-ahbc", "syscon";
+			reg = <0x1e600000 0x100>;
+		};
+
 		fmc: spi@1e620000 {
 			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
 			#address-cells = <1>;
@@ -222,41 +231,33 @@
 			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
-		mac0: ftgmac@1e660000 {
+		mac0: ethernet@1e660000 {
 			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
 			reg = <0x1e660000 0x180>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
 			status = "disabled";
 		};
 
-		mac1: ftgmac@1e680000 {
+		mac1: ethernet@1e680000 {
 			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
 			reg = <0x1e680000 0x180>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
 			status = "disabled";
 		};
 
-		mac2: ftgmac@1e670000 {
+		mac2: ethernet@1e670000 {
 			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
 			reg = <0x1e670000 0x180>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>;
 			status = "disabled";
 		};
 
-		mac3: ftgmac@1e690000 {
+		mac3: ethernet@1e690000 {
 			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
 			reg = <0x1e690000 0x180>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>;
 			status = "disabled";
@@ -323,6 +324,14 @@
 			#size-cells = <1>;
 			ranges;
 
+			hace: crypto@1e6d0000 {
+				compatible = "aspeed,ast2600-hace";
+				reg = <0x1e6d0000 0x200>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+				resets = <&syscon ASPEED_RESET_HACE>;
+			};
+
 			syscon: syscon@1e6e2000 {
 				compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1000>;
@@ -373,7 +382,6 @@
 			gfx: display@1e6e6000 {
 				compatible = "aspeed,ast2600-gfx", "syscon";
 				reg = <0x1e6e6000 0x1000>;
-				reg-io-width = <4>;
 				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
 				resets = <&syscon ASPEED_RESET_GRAPHICS>;
 				syscon = <&syscon>;
@@ -381,19 +389,6 @@
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			xdma: xdma@1e6e7000 {
-				compatible = "aspeed,ast2600-xdma";
-				reg = <0x1e6e7000 0x100>;
-				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
-				resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>;
-				reset-names = "device", "root-complex";
-				interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-						      <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>;
-				aspeed,pcie-device = "bmc";
-				aspeed,scu = <&syscon>;
-				status = "disabled";
-			};
-
 			adc0: adc@1e6e9000 {
 				compatible = "aspeed,ast2600-adc0";
 				reg = <0x1e6e9000 0x100>;
@@ -419,6 +414,14 @@
 				reg = <0x1e6f2000 0x1000>;
 			};
 
+			acry: crypto@1e6fa000 {
+				compatible = "aspeed,ast2600-acry";
+				reg = <0x1e6fa000 0x400>, <0x1e710000 0x1800>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_RSACLK>;
+				aspeed,ahbc = <&ahbc>;
+			};
+
 			video: video@1e700000 {
 				compatible = "aspeed,ast2600-video-engine";
 				reg = <0x1e700000 0x1000>;
@@ -449,6 +452,7 @@
 				reg = <0x1e780500 0x100>;
 				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -463,6 +467,7 @@
 				reg = <0x1e780600 0x100>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -566,7 +571,6 @@
 			lpc: lpc@1e789000 {
 				compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
-				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -656,7 +660,7 @@
 				status = "disabled";
 
 				sdhci0: sdhci@1e740100 {
-					compatible = "aspeed,ast2600-sdhci", "sdhci";
+					compatible = "aspeed,ast2600-sdhci";
 					reg = <0x100 0x100>;
 					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 					sdhci,auto-cmd12;
@@ -665,7 +669,7 @@
 				};
 
 				sdhci1: sdhci@1e740200 {
-					compatible = "aspeed,ast2600-sdhci", "sdhci";
+					compatible = "aspeed,ast2600-sdhci";
 					reg = <0x200 0x100>;
 					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 					sdhci,auto-cmd12;
@@ -704,6 +708,16 @@
 				status = "disabled";
 			};
 
+			vuart3: serial@1e787800 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e787800 0x40>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
 			vuart2: serial@1e788000 {
 				compatible = "aspeed,ast2500-vuart";
 				reg = <0x1e788000 0x40>;
@@ -714,6 +728,16 @@
 				status = "disabled";
 			};
 
+			vuart4: serial@1e788800 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e788800 0x40>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x20>;
@@ -756,6 +780,62 @@
 				status = "disabled";
 			};
 
+			uart6: serial@1e790000 {
+				compatible = "ns16550a";
+				reg = <0x1e790000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART6CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart6_default>;
+
+				status = "disabled";
+			};
+
+			uart7: serial@1e790100 {
+				compatible = "ns16550a";
+				reg = <0x1e790100 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART7CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart7_default>;
+
+				status = "disabled";
+			};
+
+			uart8: serial@1e790200 {
+				compatible = "ns16550a";
+				reg = <0x1e790200 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART8CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart8_default>;
+
+				status = "disabled";
+			};
+
+			uart9: serial@1e790300 {
+				compatible = "ns16550a";
+				reg = <0x1e790300 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART9CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart9_default>;
+
+				status = "disabled";
+			};
+
 			i2c: bus@1e78a000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
@@ -764,22 +844,35 @@
 			};
 
 			fsim0: fsi@1e79b000 {
-				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				#interrupt-cells = <1>;
+				compatible = "aspeed,ast2600-fsi-master";
 				reg = <0x1e79b000 0x94>;
 				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_fsi1_default>;
 				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				interrupt-controller;
 				status = "disabled";
 			};
 
 			fsim1: fsi@1e79b100 {
-				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				#interrupt-cells = <1>;
+				compatible = "aspeed,ast2600-fsi-master";
 				reg = <0x1e79b100 0x94>;
 				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_fsi2_default>;
 				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				interrupt-controller;
+				status = "disabled";
+			};
+
+			udma: dma-controller@1e79e000 {
+				compatible = "aspeed,ast2600-udma";
+				reg = <0x1e79e000 0x1000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				dma-channels = <28>;
+				#dma-cells = <1>;
 				status = "disabled";
 			};
 		};
@@ -789,10 +882,9 @@
 #include "aspeed-g6-pinctrl.dtsi"
 
 &i2c {
-	i2c0: i2c-bus@80 {
+	i2c0: i2c@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x80 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -804,10 +896,9 @@
 		status = "disabled";
 	};
 
-	i2c1: i2c-bus@100 {
+	i2c1: i2c@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x100 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -819,10 +910,9 @@
 		status = "disabled";
 	};
 
-	i2c2: i2c-bus@180 {
+	i2c2: i2c@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x180 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -834,10 +924,9 @@
 		status = "disabled";
 	};
 
-	i2c3: i2c-bus@200 {
+	i2c3: i2c@200 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x200 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -849,10 +938,9 @@
 		status = "disabled";
 	};
 
-	i2c4: i2c-bus@280 {
+	i2c4: i2c@280 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x280 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -864,10 +952,9 @@
 		status = "disabled";
 	};
 
-	i2c5: i2c-bus@300 {
+	i2c5: i2c@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x300 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -879,10 +966,9 @@
 		status = "disabled";
 	};
 
-	i2c6: i2c-bus@380 {
+	i2c6: i2c@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x380 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -894,10 +980,9 @@
 		status = "disabled";
 	};
 
-	i2c7: i2c-bus@400 {
+	i2c7: i2c@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x400 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -909,10 +994,9 @@
 		status = "disabled";
 	};
 
-	i2c8: i2c-bus@480 {
+	i2c8: i2c@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x480 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -924,10 +1008,9 @@
 		status = "disabled";
 	};
 
-	i2c9: i2c-bus@500 {
+	i2c9: i2c@500 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x500 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -939,10 +1022,9 @@
 		status = "disabled";
 	};
 
-	i2c10: i2c-bus@580 {
+	i2c10: i2c@580 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x580 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -954,10 +1036,9 @@
 		status = "disabled";
 	};
 
-	i2c11: i2c-bus@600 {
+	i2c11: i2c@600 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x600 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -969,10 +1050,9 @@
 		status = "disabled";
 	};
 
-	i2c12: i2c-bus@680 {
+	i2c12: i2c@680 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x680 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -984,10 +1064,9 @@
 		status = "disabled";
 	};
 
-	i2c13: i2c-bus@700 {
+	i2c13: i2c@700 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x700 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -999,10 +1078,9 @@
 		status = "disabled";
 	};
 
-	i2c14: i2c-bus@780 {
+	i2c14: i2c@780 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x780 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1014,10 +1092,9 @@
 		status = "disabled";
 	};
 
-	i2c15: i2c-bus@800 {
+	i2c15: i2c@800 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x800 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
diff --git a/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2400-facebook-netbmc-common.dtsi
index 4e5e786e18b7..4e5e786e18b7 100644
--- a/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/aspeed/ast2400-facebook-netbmc-common.dtsi
diff --git a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2500-facebook-netbmc-common.dtsi
index c0c43b8644ee..7f1ae3f4df9d 100644
--- a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/aspeed/ast2500-facebook-netbmc-common.dtsi
@@ -4,6 +4,10 @@
 #include "aspeed-g5.dtsi"
 
 / {
+	aliases {
+		spi0 = &fmc;
+	};
+
 	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
diff --git a/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
index 051de5bec345..0ef225acddfc 100644
--- a/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
@@ -25,18 +25,22 @@
 	 * full-duplex SPI transactions are not supported by ASPEED SPI
 	 * Controllers.
 	 */
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		status = "okay";
 		compatible = "spi-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+		/*
+		 * chipselect pins are defined in platform .dts files
+		 * separately.
+		 */
+		sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
@@ -152,18 +156,6 @@
 	status = "okay";
 };
 
-&emmc_controller {
-	status = "okay";
-};
-
-&emmc {
-	status = "okay";
-
-	non-removable;
-	max-frequency = <25000000>;
-	bus-width = <4>;
-};
-
 &rtc {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi
new file mode 100644
index 000000000000..efd92232cda2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/*
+	 * u-boot partition: 896KB.
+	 */
+	u-boot@0 {
+		reg = <0x0 0xe0000>;
+		label = "u-boot";
+	};
+
+	/*
+	 * u-boot environment variables: 64KB.
+	 */
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x10000>;
+		label = "env";
+	};
+
+	/*
+	 * image metadata partition (64KB), used by Facebook internal
+	 * tools.
+	 */
+	image-meta@f0000 {
+		reg = <0xf0000 0x10000>;
+		label = "meta";
+	};
+
+	/*
+	 * FIT image: 63 MB.
+	 */
+	fit@100000 {
+		reg = <0x100000 0x3f00000>;
+		label = "fit";
+	};
+
+	/*
+	 * "data0" partition (64MB) is used by Facebook BMC platforms as
+	 * persistent data store.
+	 */
+	data0@4000000 {
+		reg = <0x4000000 0x4000000>;
+		label = "data0";
+	};
+
+	/*
+	 * Although the master partition can be created by enabling
+	 * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+	 * explicitly created to avoid breaking legacy applications.
+	 */
+	flash0@0 {
+		reg = <0x0 0x8000000>;
+		label = "flash0";
+	};
+};
diff --git a/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128.dtsi
index 7f3652dea550..7f3652dea550 100644
--- a/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi
+++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128.dtsi
diff --git a/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout.dtsi
index 87bb8b576250..87bb8b576250 100644
--- a/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi
+++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout.dtsi
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
new file mode 100644
index 000000000000..06fac236773f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 IBM Corp.
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;	/* OMI01 */
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;	/* OMI23 */
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			#interrupt-cells = <1>;
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;	/* OMI45 */
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;	/* OMI67 */
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
new file mode 100644
index 000000000000..9501f66d0030
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
@@ -0,0 +1,1309 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 IBM Corp.
+
+#include "ibm-power10-dual.dtsi"
+
+&cfam0_i2c0 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom100: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo100: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c1 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom101: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo101: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c10 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom110: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo110: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c11 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom111: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo111: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c12 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom112: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo112: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c13 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom113: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo113: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c14 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom114: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo114: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c15 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom115: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo115: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c2 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom202: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo202: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c3 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom203: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo203: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c10 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom210: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo210: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c11 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom211: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo211: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c14 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom214: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo214: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c15 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom215: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo215: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c16 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom216: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo216: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c17 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom217: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo217: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@2,0 {
+		reg = <2 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <2>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_i2c0: i2c-bus@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;	/* OM01 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom300: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo300: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c1: i2c-bus@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;	/* OM23 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom301: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo301: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom310: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo310: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom311: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo311: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c12: i2c-bus@c {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <12>;	/* OP4A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom312: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo312: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c13: i2c-bus@d {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <13>;	/* OP4B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom313: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo313: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom314: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo314: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom315: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo315: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ2: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub2: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@3,0 {
+		reg = <3 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <3>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_i2c2: i2c-bus@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;	/* OM45 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom402: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo402: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c3: i2c-bus@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;	/* OM67 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom403: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo403: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom410: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo410: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom411: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo411: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom414: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo414: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom415: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo415: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c16: i2c-bus@10 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <16>;	/* OP6A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom416: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo416: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c17: i2c-bus@11 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <17>;	/* OP6B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom417: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo417: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ3: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub3: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ2 {
+	reg = <3>;
+};
+
+&fsi_occ3 {
+	reg = <4>;
+};
+
+/ {
+	aliases {
+		i2c300 = &cfam2_i2c0;
+		i2c301 = &cfam2_i2c1;
+		i2c310 = &cfam2_i2c10;
+		i2c311 = &cfam2_i2c11;
+		i2c312 = &cfam2_i2c12;
+		i2c313 = &cfam2_i2c13;
+		i2c314 = &cfam2_i2c14;
+		i2c315 = &cfam2_i2c15;
+		i2c402 = &cfam3_i2c2;
+		i2c403 = &cfam3_i2c3;
+		i2c410 = &cfam3_i2c10;
+		i2c411 = &cfam3_i2c11;
+		i2c414 = &cfam3_i2c14;
+		i2c415 = &cfam3_i2c15;
+		i2c416 = &cfam3_i2c16;
+		i2c417 = &cfam3_i2c17;
+
+		sbefifo100 = &sbefifo100;
+		sbefifo101 = &sbefifo101;
+		sbefifo110 = &sbefifo110;
+		sbefifo111 = &sbefifo111;
+		sbefifo112 = &sbefifo112;
+		sbefifo113 = &sbefifo113;
+		sbefifo114 = &sbefifo114;
+		sbefifo115 = &sbefifo115;
+		sbefifo202 = &sbefifo202;
+		sbefifo203 = &sbefifo203;
+		sbefifo210 = &sbefifo210;
+		sbefifo211 = &sbefifo211;
+		sbefifo214 = &sbefifo214;
+		sbefifo215 = &sbefifo215;
+		sbefifo216 = &sbefifo216;
+		sbefifo217 = &sbefifo217;
+		sbefifo300 = &sbefifo300;
+		sbefifo301 = &sbefifo301;
+		sbefifo310 = &sbefifo310;
+		sbefifo311 = &sbefifo311;
+		sbefifo312 = &sbefifo312;
+		sbefifo313 = &sbefifo313;
+		sbefifo314 = &sbefifo314;
+		sbefifo315 = &sbefifo315;
+		sbefifo402 = &sbefifo402;
+		sbefifo403 = &sbefifo403;
+		sbefifo410 = &sbefifo410;
+		sbefifo411 = &sbefifo411;
+		sbefifo414 = &sbefifo414;
+		sbefifo415 = &sbefifo415;
+		sbefifo416 = &sbefifo416;
+		sbefifo417 = &sbefifo417;
+
+		scom100 = &scom100;
+		scom101 = &scom101;
+		scom110 = &scom110;
+		scom111 = &scom111;
+		scom112 = &scom112;
+		scom113 = &scom113;
+		scom114 = &scom114;
+		scom115 = &scom115;
+		scom202 = &scom202;
+		scom203 = &scom203;
+		scom210 = &scom210;
+		scom211 = &scom211;
+		scom214 = &scom214;
+		scom215 = &scom215;
+		scom216 = &scom216;
+		scom217 = &scom217;
+		scom300 = &scom300;
+		scom301 = &scom301;
+		scom310 = &scom310;
+		scom311 = &scom311;
+		scom312 = &scom312;
+		scom313 = &scom313;
+		scom314 = &scom314;
+		scom315 = &scom315;
+		scom402 = &scom402;
+		scom403 = &scom403;
+		scom410 = &scom410;
+		scom411 = &scom411;
+		scom414 = &scom414;
+		scom415 = &scom415;
+		scom416 = &scom416;
+		scom417 = &scom417;
+
+		spi30 = &cfam2_spi0;
+		spi31 = &cfam2_spi1;
+		spi32 = &cfam2_spi2;
+		spi33 = &cfam2_spi3;
+		spi40 = &cfam3_spi0;
+		spi41 = &cfam3_spi1;
+		spi42 = &cfam3_spi2;
+		spi43 = &cfam3_spi3;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
new file mode 100644
index 000000000000..68c941a194b6
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
@@ -0,0 +1,1539 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+		i2c300 = &cfam2_i2c0;
+		i2c301 = &cfam2_i2c1;
+		i2c310 = &cfam2_i2c10;
+		i2c311 = &cfam2_i2c11;
+		i2c312 = &cfam2_i2c12;
+		i2c313 = &cfam2_i2c13;
+		i2c314 = &cfam2_i2c14;
+		i2c315 = &cfam2_i2c15;
+		i2c402 = &cfam3_i2c2;
+		i2c403 = &cfam3_i2c3;
+		i2c410 = &cfam3_i2c10;
+		i2c411 = &cfam3_i2c11;
+		i2c414 = &cfam3_i2c14;
+		i2c415 = &cfam3_i2c15;
+		i2c416 = &cfam3_i2c16;
+		i2c417 = &cfam3_i2c17;
+
+		sbefifo100 = &sbefifo100;
+		sbefifo101 = &sbefifo101;
+		sbefifo110 = &sbefifo110;
+		sbefifo111 = &sbefifo111;
+		sbefifo112 = &sbefifo112;
+		sbefifo113 = &sbefifo113;
+		sbefifo114 = &sbefifo114;
+		sbefifo115 = &sbefifo115;
+		sbefifo202 = &sbefifo202;
+		sbefifo203 = &sbefifo203;
+		sbefifo210 = &sbefifo210;
+		sbefifo211 = &sbefifo211;
+		sbefifo214 = &sbefifo214;
+		sbefifo215 = &sbefifo215;
+		sbefifo216 = &sbefifo216;
+		sbefifo217 = &sbefifo217;
+		sbefifo300 = &sbefifo300;
+		sbefifo301 = &sbefifo301;
+		sbefifo310 = &sbefifo310;
+		sbefifo311 = &sbefifo311;
+		sbefifo312 = &sbefifo312;
+		sbefifo313 = &sbefifo313;
+		sbefifo314 = &sbefifo314;
+		sbefifo315 = &sbefifo315;
+		sbefifo402 = &sbefifo402;
+		sbefifo403 = &sbefifo403;
+		sbefifo410 = &sbefifo410;
+		sbefifo411 = &sbefifo411;
+		sbefifo414 = &sbefifo414;
+		sbefifo415 = &sbefifo415;
+		sbefifo416 = &sbefifo416;
+		sbefifo417 = &sbefifo417;
+
+		scom100 = &scom100;
+		scom101 = &scom101;
+		scom110 = &scom110;
+		scom111 = &scom111;
+		scom112 = &scom112;
+		scom113 = &scom113;
+		scom114 = &scom114;
+		scom115 = &scom115;
+		scom202 = &scom202;
+		scom203 = &scom203;
+		scom210 = &scom210;
+		scom211 = &scom211;
+		scom214 = &scom214;
+		scom215 = &scom215;
+		scom216 = &scom216;
+		scom217 = &scom217;
+		scom300 = &scom300;
+		scom301 = &scom301;
+		scom310 = &scom310;
+		scom311 = &scom311;
+		scom312 = &scom312;
+		scom313 = &scom313;
+		scom314 = &scom314;
+		scom315 = &scom315;
+		scom402 = &scom402;
+		scom403 = &scom403;
+		scom410 = &scom410;
+		scom411 = &scom411;
+		scom414 = &scom414;
+		scom415 = &scom415;
+		scom416 = &scom416;
+		scom417 = &scom417;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+		spi30 = &cfam2_spi0;
+		spi31 = &cfam2_spi1;
+		spi32 = &cfam2_spi2;
+		spi33 = &cfam2_spi3;
+		spi40 = &cfam3_spi0;
+		spi41 = &cfam3_spi1;
+		spi42 = &cfam3_spi2;
+		spi43 = &cfam3_spi3;
+	};
+};
+
+&fsim0 {
+	#address-cells = <2>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <100000000>;
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OMI01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom100: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo100: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OMI23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom101: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo101: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom110: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo110: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom111: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo111: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom112: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo112: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom113: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo113: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom114: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo114: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom115: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo115: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub0: fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OMI45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom202: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo202: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OMI67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom203: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo203: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom210: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo210: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom211: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo211: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom214: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo214: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom215: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo215: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom216: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo216: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom217: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo217: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@2,0 {
+		reg = <2 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <2>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom300: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo300: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom301: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo301: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom310: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo310: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom311: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo311: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom312: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo312: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom313: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo313: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom314: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo314: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom315: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo315: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam2_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam2_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam2_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@3,0 {
+		reg = <3 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <3>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom402: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo402: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom403: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo403: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom410: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo410: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom411: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo411: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom414: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo414: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom415: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo415: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom416: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo416: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom417: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo417: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam3_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam3_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam3_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ibm-power9-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power9-dual.dtsi
index a0fa65b44b0f..a0fa65b44b0f 100644
--- a/arch/arm/boot/dts/ibm-power9-dual.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power9-dual.dtsi
diff --git a/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-128.dtsi
index 05101a38c5bd..05101a38c5bd 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-128.dtsi
diff --git a/arch/arm/boot/dts/openbmc-flash-layout-64-alt.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64-alt.dtsi
index 650525867561..650525867561 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout-64-alt.dtsi
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64-alt.dtsi
diff --git a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64.dtsi
index 7af41361c480..7af41361c480 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64.dtsi
diff --git a/arch/arm/boot/dts/openbmc-flash-layout.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout.dtsi
index b47e14063c38..b47e14063c38 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout.dtsi
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout.dtsi
diff --git a/arch/arm/boot/dts/axis/Makefile b/arch/arm/boot/dts/axis/Makefile
new file mode 100644
index 000000000000..2cab41451281
--- /dev/null
+++ b/arch/arm/boot/dts/axis/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_ARTPEC6) += \
+	artpec6-devboard.dtb
+dtb-$(CONFIG_MACH_ARTPEC6) += \
+	artpec6-devboard.dtb
diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/axis/artpec6-devboard.dts
index 042a9cc920c6..042a9cc920c6 100644
--- a/arch/arm/boot/dts/artpec6-devboard.dts
+++ b/arch/arm/boot/dts/axis/artpec6-devboard.dts
diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/axis/artpec6.dtsi
index 037157e6c5ee..037157e6c5ee 100644
--- a/arch/arm/boot/dts/artpec6.dtsi
+++ b/arch/arm/boot/dts/axis/artpec6.dtsi
diff --git a/arch/arm/boot/dts/bcm21664-garnet.dts b/arch/arm/boot/dts/bcm21664-garnet.dts
deleted file mode 100644
index 1854cd907a1b..000000000000
--- a/arch/arm/boot/dts/bcm21664-garnet.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2014 Broadcom Corporation
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "bcm21664.dtsi"
-
-/ {
-	model = "BCM21664 Garnet board";
-	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	uart@3e000000 {
-		status = "okay";
-	};
-
-	sdio1: sdio@3f180000 {
-		max-frequency = <48000000>;
-		status = "okay";
-	};
-
-	sdio2: sdio@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		status = "okay";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
-		status = "okay";
-	};
-
-	usbotg: usb@3f120000 {
-		status = "okay";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
-};
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
deleted file mode 100644
index 2684c37cb3a0..000000000000
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ /dev/null
@@ -1,347 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2014 Broadcom Corporation
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#include "dt-bindings/clock/bcm21664.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "BCM21664 SoC";
-	compatible = "brcm,bcm21664";
-	interrupt-parent = <&gic>;
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			enable-method = "brcm,bcm11351-cpu-method";
-			secondary-boot-reg = <0x35004178>;
-			reg = <1>;
-		};
-	};
-
-	gic: interrupt-controller@3ff00100 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x3ff01000 0x1000>,
-		      <0x3ff00100 0x100>;
-	};
-
-	smc@3404e000 {
-		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
-		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
-	};
-
-	uart@3e000000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e000000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	uart@3e001000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e001000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
-		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	uart@3e002000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e002000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	L2: cache-controller@3ff20000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x3ff20000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	brcm,resetmgr@35001f00 {
-		compatible = "brcm,bcm21664-resetmgr";
-		reg = <0x35001f00 0x24>;
-	};
-
-	timer@35006000 {
-		compatible = "brcm,kona-timer";
-		reg = <0x35006000 0x1c>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
-	};
-
-	gpio: gpio@35003000 {
-		compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
-		reg = <0x35003000 0x524>;
-		interrupts =
-		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		interrupt-controller;
-	};
-
-	sdio1: sdio@3f180000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f180000 0x801c>;
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
-		status = "disabled";
-	};
-
-	sdio2: sdio@3f190000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f190000 0x801c>;
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
-		status = "disabled";
-	};
-
-	sdio3: sdio@3f1a0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1a0000 0x801c>;
-		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
-		status = "disabled";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1b0000 0x801c>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
-		status = "disabled";
-	};
-
-	i2c@3e016000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e016000 0x70>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
-		status = "disabled";
-	};
-
-	i2c@3e017000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e017000 0x70>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
-		status = "disabled";
-	};
-
-	i2c@3e018000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e018000 0x70>;
-		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
-		status = "disabled";
-	};
-
-	i2c@3e01c000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e01c000 0x70>;
-		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
-		status = "disabled";
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * Fixed clocks are defined before CCUs whose
-		 * clocks may depend on them.
-		 */
-
-		ref_32k_clk: ref_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		bbl_32k_clk: bbl_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ref_13m_clk: ref_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		var_13m_clk: var_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		dft_19_5m_clk: dft_19_5m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <19500000>;
-		};
-
-		ref_crystal_clk: ref_crystal {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
-		};
-
-		ref_52m_clk: ref_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		var_52m_clk: var_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		usb_otg_ahb_clk: usb_otg_ahb {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		ref_96m_clk: ref_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		var_96m_clk: var_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		ref_104m_clk: ref_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		var_104m_clk: var_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		ref_156m_clk: ref_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		var_156m_clk: var_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		root_ccu: root_ccu@35001000 {
-			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
-			reg = <0x35001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "frac_1m";
-		};
-
-		aon_ccu: aon_ccu@35002000 {
-			compatible = BCM21664_DT_AON_CCU_COMPAT;
-			reg = <0x35002000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "hub_timer";
-		};
-
-		master_ccu: master_ccu@3f001000 {
-			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
-			reg = <0x3f001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "sdio1",
-					     "sdio2",
-					     "sdio3",
-					     "sdio4",
-					     "sdio1_sleep",
-					     "sdio2_sleep",
-					     "sdio3_sleep",
-					     "sdio4_sleep";
-		};
-
-		slave_ccu: slave_ccu@3e011000 {
-			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
-			reg = <0x3e011000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "uartb",
-					     "uartb2",
-					     "uartb3",
-					     "bsc1",
-					     "bsc2",
-					     "bsc3",
-					     "bsc4";
-		};
-	};
-
-	usbotg: usb@3f120000 {
-		compatible = "snps,dwc2";
-		reg = <0x3f120000 0x10000>;
-		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usb_otg_ahb_clk>;
-		clock-names = "otg";
-		phys = <&usbphy>;
-		phy-names = "usb2-phy";
-		status = "disabled";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		compatible = "brcm,kona-usb2-phy";
-		reg = <0x3f130000 0x28>;
-		#phy-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi
deleted file mode 100644
index a36c9b1d23c8..000000000000
--- a/arch/arm/boot/dts/bcm23550.dtsi
+++ /dev/null
@@ -1,415 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2016 Broadcom.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/* BCM23550 and BCM21664 have almost identical clocks */
-#include "dt-bindings/clock/bcm21664.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "BCM23550 SoC";
-	compatible = "brcm,bcm23550";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-			clock-frequency = <1000000000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "brcm,bcm23550";
-			secondary-boot-reg = <0x35004178>;
-			reg = <1>;
-			clock-frequency = <1000000000>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "brcm,bcm23550";
-			secondary-boot-reg = <0x35004178>;
-			reg = <2>;
-			clock-frequency = <1000000000>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "brcm,bcm23550";
-			secondary-boot-reg = <0x35004178>;
-			reg = <3>;
-			clock-frequency = <1000000000>;
-		};
-	};
-
-	/* Hub bus */
-	hub@34000000 {
-		compatible = "simple-bus";
-		ranges = <0 0x34000000 0x102f83ac>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		smc@4e000 {
-			compatible = "brcm,bcm23550-smc", "brcm,kona-smc";
-			reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */
-		};
-
-		resetmgr: reset-controller@1001f00 {
-			compatible = "brcm,bcm21664-resetmgr";
-			reg = <0x01001f00 0x24>;
-		};
-
-		gpio: gpio@1003000 {
-			compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
-			reg = <0x01003000 0x524>;
-			interrupts =
-			       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			interrupt-controller;
-		};
-
-		timer@1006000 {
-			compatible = "brcm,kona-timer";
-			reg = <0x01006000 0x1c>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
-		};
-	};
-
-	/* Slaves bus */
-	slaves@3e000000 {
-		compatible = "simple-bus";
-		ranges = <0 0x3e000000 0x0001c070>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uartb: serial@0 {
-			compatible = "snps,dw-apb-uart";
-			status = "disabled";
-			reg = <0x00000000 0x118>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
-			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		uartb2: serial@1000 {
-			compatible = "snps,dw-apb-uart";
-			status = "disabled";
-			reg = <0x00001000 0x118>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
-			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		uartb3: serial@2000 {
-			compatible = "snps,dw-apb-uart";
-			status = "disabled";
-			reg = <0x00002000 0x118>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		bsc1: i2c@16000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x00016000 0x70>;
-			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
-			status = "disabled";
-		};
-
-		bsc2: i2c@17000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x00017000 0x70>;
-			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
-			status = "disabled";
-		};
-
-		bsc3: i2c@18000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x00018000 0x70>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
-			status = "disabled";
-		};
-
-		bsc4: i2c@1c000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x0001c000 0x70>;
-			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
-			status = "disabled";
-		};
-	};
-
-	/* Apps bus */
-	apps@3e300000 {
-		compatible = "simple-bus";
-		ranges = <0 0x3e300000 0x01b77000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		usbotg: usb@e20000 {
-			compatible = "snps,dwc2";
-			reg = <0x00e20000 0x10000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&usb_otg_ahb_clk>;
-			clock-names = "otg";
-			phys = <&usbphy>;
-			phy-names = "usb2-phy";
-			status = "disabled";
-		};
-
-		usbphy: usb-phy@e30000 {
-			compatible = "brcm,kona-usb2-phy";
-			reg = <0x00e30000 0x28>;
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		sdio1: sdio@e80000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00e80000 0x801c>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
-			status = "disabled";
-		};
-
-		sdio2: sdio@e90000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00e90000 0x801c>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
-			status = "disabled";
-		};
-
-		sdio3: sdio@ea0000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00ea0000 0x801c>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
-			status = "disabled";
-		};
-
-		sdio4: sdio@eb0000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00eb0000 0x801c>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
-			status = "disabled";
-		};
-
-		cdc: cdc@1b0e000 {
-			compatible = "brcm,bcm23550-cdc";
-			reg = <0x01b0e000 0x78>;
-		};
-
-		gic: interrupt-controller@1b21000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x01b21000 0x1000>,
-			      <0x01b22000 0x1000>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * Fixed clocks are defined before CCUs whose
-		 * clocks may depend on them.
-		 */
-
-		ref_32k_clk: ref_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		bbl_32k_clk: bbl_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ref_13m_clk: ref_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		var_13m_clk: var_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		dft_19_5m_clk: dft_19_5m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <19500000>;
-		};
-
-		ref_crystal_clk: ref_crystal {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
-		};
-
-		ref_52m_clk: ref_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		var_52m_clk: var_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		usb_otg_ahb_clk: usb_otg_ahb {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		ref_96m_clk: ref_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		var_96m_clk: var_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		ref_104m_clk: ref_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		var_104m_clk: var_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		ref_156m_clk: ref_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		var_156m_clk: var_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		root_ccu: root_ccu@35001000 {
-			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
-			reg = <0x35001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "frac_1m";
-		};
-
-		aon_ccu: aon_ccu@35002000 {
-			compatible = BCM21664_DT_AON_CCU_COMPAT;
-			reg = <0x35002000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "hub_timer";
-		};
-
-		slave_ccu: slave_ccu@3e011000 {
-			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
-			reg = <0x3e011000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "uartb",
-					     "uartb2",
-					     "uartb3",
-					     "bsc1",
-					     "bsc2",
-					     "bsc3",
-					     "bsc4";
-		};
-
-		master_ccu: master_ccu@3f001000 {
-			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
-			reg = <0x3f001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "sdio1",
-					     "sdio2",
-					     "sdio3",
-					     "sdio4",
-					     "sdio1_sleep",
-					     "sdio2_sleep",
-					     "sdio3_sleep",
-					     "sdio4_sleep";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts
deleted file mode 100644
index 19600b629be5..000000000000
--- a/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts
+++ /dev/null
@@ -1,138 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2711-rpi-cm4.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	model = "Raspberry Pi Compute Module 4 IO Board";
-
-	leds {
-		led-act {
-			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
-};
-
-&ddc0 {
-	status = "okay";
-};
-
-&ddc1 {
-	status = "okay";
-};
-
-&gpio {
-	/*
-	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
-	 * the official GPU firmware DT blob.
-	 *
-	 * Legend:
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "ID_SDA",
-			  "ID_SCL",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD1",
-			  "RXD1",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "RGMII_MDIO",
-			  "RGMIO_MDC",
-			  /* Used by BT module */
-			  "CTS0",
-			  "RTS0",
-			  "TXD0",
-			  "RXD0",
-			  /* Used by Wifi */
-			  "SD1_CLK",
-			  "SD1_CMD",
-			  "SD1_DATA0",
-			  "SD1_DATA1",
-			  "SD1_DATA2",
-			  "SD1_DATA3",
-			  /* Shared with SPI flash */
-			  "PWM0_MISO",
-			  "PWM1_MOSI",
-			  "STATUS_LED_G_CLK",
-			  "SPIFLASH_CE_N",
-			  "SDA0",
-			  "SCL0",
-			  "RGMII_RXCLK",
-			  "RGMII_RXCTL",
-			  "RGMII_RXD0",
-			  "RGMII_RXD1",
-			  "RGMII_RXD2",
-			  "RGMII_RXD3",
-			  "RGMII_TXCLK",
-			  "RGMII_TXCTL",
-			  "RGMII_TXD0",
-			  "RGMII_TXD1",
-			  "RGMII_TXD2",
-			  "RGMII_TXD3";
-};
-
-&hdmi0 {
-	status = "okay";
-};
-
-&hdmi1 {
-	status = "okay";
-};
-
-&genet {
-	status = "okay";
-};
-
-&pixelvalve0 {
-	status = "okay";
-};
-
-&pixelvalve1 {
-	status = "okay";
-};
-
-&pixelvalve2 {
-	status = "okay";
-};
-
-&pixelvalve4 {
-	status = "okay";
-};
-
-&vc4 {
-	status = "okay";
-};
-
-&vec {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
deleted file mode 100644
index fce3d5260b00..000000000000
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2013 Broadcom Corporation
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "bcm11351.dtsi"
-
-/ {
-	model = "BCM28155 AP board";
-	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	uart@3e000000 {
-		status = "okay";
-	};
-
-	i2c@3e016000 {
-		status = "okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3e017000 {
-		status = "okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3e018000 {
-		status = "okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3500d000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		pmu: pmu@8 {
-			reg = <0x08>;
-		};
-	};
-
-	sdio2: sdio@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		vmmc-supply = <&camldo1_reg>;
-		vqmmc-supply = <&iosr1_reg>;
-		status = "okay";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		vmmc-supply = <&sdldo_reg>;
-		vqmmc-supply = <&sdxldo_reg>;
-		status = "okay";
-	};
-
-	pwm: pwm@3e01a000 {
-		status = "okay";
-	};
-
-	usbotg: usb@3f120000 {
-		vusb_d-supply = <&usbldo_reg>;
-		vusb_a-supply = <&iosr1_reg>;
-		status = "okay";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
-};
-
-#include "bcm59056.dtsi"
-
-&pmu {
-	compatible = "brcm,bcm59056";
-	interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-	regulators {
-		camldo1_reg: camldo1 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		sdldo_reg: sdldo {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		sdxldo_reg: sdxldo {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		usbldo_reg: usbldo {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		iosr1_reg: iosr1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
deleted file mode 100644
index 8a55b6cded59..000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
+++ /dev/null
@@ -1,12 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * This include file covers the common peripherals and configuration between
- * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's
- * firmware interface.
- */
-
-#include <dt-bindings/power/raspberrypi-power.h>
-
-&v3d {
-	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
deleted file mode 100644
index 87ddcad76083..000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ /dev/null
@@ -1,81 +0,0 @@
-#include <dt-bindings/power/raspberrypi-power.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-
-		led-act {
-			label = "ACT";
-			default-state = "keep";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	soc {
-		firmware: firmware {
-			compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			mboxes = <&mailbox>;
-			dma-ranges;
-		};
-
-		power: power {
-			compatible = "raspberrypi,bcm2835-power";
-			firmware = <&firmware>;
-			#power-domain-cells = <1>;
-		};
-
-		vchiq: mailbox@7e00b840 {
-			compatible = "brcm,bcm2835-vchiq";
-			reg = <0x7e00b840 0x3c>;
-			interrupts = <0 2>;
-		};
-	};
-};
-
-&gpio {
-	pinctrl-names = "default";
-
-	gpioout: gpioout {
-		brcm,pins = <6>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	alt0: alt0 {
-		brcm,pins = <4 5 7 8 9 10 11>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_gpio0>;
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_gpio2>;
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&usb {
-	power-domains = <&power RPI_POWER_DOMAIN_USB>;
-};
-
-&vec {
-	power-domains = <&power RPI_POWER_DOMAIN_VEC>;
-	status = "okay";
-};
-
-&dsi0 {
-	power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
-};
-
-&dsi1 {
-	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
-};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
deleted file mode 100644
index 14ee410183af..000000000000
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2016 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-
-/ {
-	compatible = "luxul,xap-1510v1", "brcm,bcm4708";
-	model = "Luxul XAP-1510 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "poe";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "lan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
deleted file mode 100644
index c8c02377543b..000000000000
--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm47081.dtsi"
-
-/ {
-	compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708";
-	model = "Luxul XAP-1410 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@4 {
-			reg = <4>;
-			label = "poe";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
deleted file mode 100644
index 99253fd7adb3..000000000000
--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- */
-
-/dts-v1/;
-
-#include "bcm4709.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
-	model = "Linksys EA9200";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	nvram@1c080000 {
-		compatible = "brcm,nvram";
-		reg = <0x1c080000 0x180000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
deleted file mode 100644
index a5fec56d11c0..000000000000
--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+++ /dev/null
@@ -1,284 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2021-2022 Arınç ÜNAL <arinc.unal@arinc9.com>
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Asus RT-AC88U";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x18000000>;
-	};
-
-	nvram@1c080000 {
-		compatible = "brcm,nvram";
-		reg = <0x1c080000 0x00180000>;
-
-		et1macaddr: et1macaddr {
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power {
-			label = "white:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		wan-red {
-			label = "red:wan";
-			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		lan {
-			label = "white:lan";
-			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
-		};
-
-		usb2 {
-			label = "white:usb2";
-			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ehci_port2>;
-			linux,default-trigger = "usbport";
-		};
-
-		usb3 {
-			label = "white:usb3";
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ehci_port1>, <&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		wps {
-			label = "white:wps";
-			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-		};
-
-		button-reset {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-
-		button-wifi {
-			label = "Wi-Fi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-		};
-
-		button-led {
-			label = "Backlight";
-			linux,code = <KEY_BRIGHTNESS_ZERO>;
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	switch {
-		compatible = "realtek,rtl8365mb";
-		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
-		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-		realtek,disable-leds;
-		dsa,member = <1 0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan5";
-				phy-handle = <&ethphy0>;
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan6";
-				phy-handle = <&ethphy1>;
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan7";
-				phy-handle = <&ethphy2>;
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan8";
-				phy-handle = <&ethphy3>;
-			};
-
-			port@6 {
-				reg = <6>;
-				label = "cpu";
-				ethernet = <&sw0_p5>;
-				phy-mode = "rgmii";
-				tx-internal-delay-ps = <2000>;
-				rx-internal-delay-ps = <2100>;
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-					pause;
-				};
-			};
-		};
-
-		mdio {
-			compatible = "realtek,smi-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ethphy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			ethphy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-
-			ethphy2: ethernet-phy@2 {
-				reg = <2>;
-			};
-
-			ethphy3: ethernet-phy@3 {
-				reg = <3>;
-			};
-		};
-	};
-};
-
-&srab {
-	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
-	status = "okay";
-	dsa,member = <0 0>;
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "lan4";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan3";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan2";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan1";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-
-		sw0_p5: port@5 {
-			reg = <5>;
-			label = "extsw";
-			phy-mode = "rgmii";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-				pause;
-			};
-		};
-
-		port@7 {
-			reg = <7>;
-			ethernet = <&gmac1>;
-			label = "cpu";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		port@8 {
-			reg = <8>;
-			ethernet = <&gmac2>;
-			label = "cpu";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
-
-&gmac0 {
-	status = "disabled";
-};
-
-&gmac1 {
-	nvmem-cells = <&et1macaddr>;
-	nvmem-cell-names = "mac-address";
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&nandcs {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x00080000>;
-			read-only;
-		};
-
-		partition@80000 {
-			label = "nvram";
-			reg = <0x00080000 0x00180000>;
-		};
-
-		partition@200000 {
-			label = "firmware";
-			reg = <0x00200000 0x07e00000>;
-			compatible = "brcm,trx";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
deleted file mode 100644
index ee24d3768536..000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-
-/ {
-	compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul XAP-1610 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		status	{
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "poe";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
deleted file mode 100644
index 78a90dd57a4e..000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ /dev/null
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul XWR-3150 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x18000000>;
-	};
-
-	nvram@1eff0000 {
-		compatible = "brcm,nvram";
-		reg = <0x1eff0000 0x10000>;
-
-		et0macaddr: et0macaddr {
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power	{
-			label = "bcm53xx:green:power";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		usb3	{
-			label = "bcm53xx:green:usb3";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-					  <&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		status	{
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		2ghz {
-			label = "bcm53xx:green:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		5ghz {
-			label = "bcm53xx:green:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&gmac0 {
-	nvmem-cells = <&et0macaddr>;
-	nvmem-cell-names = "mac-address";
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "lan4";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan3";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan2";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan1";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
deleted file mode 100644
index 5fc1b847f4aa..000000000000
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ /dev/null
@@ -1,581 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
- * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
- *
- * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-#include <dt-bindings/clock/bcm-nsp.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	chipcommon-a-bus@18000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x18000000 0x00001000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uart0: serial@300 {
-			compatible = "ns16550";
-			reg = <0x0300 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&iprocslow>;
-			status = "disabled";
-		};
-
-		uart1: serial@400 {
-			compatible = "ns16550";
-			reg = <0x0400 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&iprocslow>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinmux_uart1>;
-			status = "disabled";
-		};
-	};
-
-	mpcore-bus@19000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x19000000 0x00023000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		a9pll: arm_clk@0 {
-			#clock-cells = <0>;
-			compatible = "brcm,nsp-armpll";
-			clocks = <&osc>;
-			reg = <0x00000 0x1000>;
-		};
-
-		scu@20000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0x20000 0x100>;
-		};
-
-		timer@20200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&periph_clk>;
-		};
-
-		timer@20600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x20600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&periph_clk>;
-		};
-
-		watchdog@20620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0x20620 0x20>;
-			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&periph_clk>;
-		};
-
-		gic: interrupt-controller@21000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x21000 0x1000>,
-			      <0x20100 0x100>;
-		};
-
-		L2: cache-controller@22000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x22000 0x1000>;
-			cache-unified;
-			arm,shared-override;
-			prefetch-data = <1>;
-			prefetch-instr = <1>;
-			cache-level = <2>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts =
-			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		osc: oscillator {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <25000000>;
-		};
-
-		iprocmed: iprocmed {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		iprocslow: iprocslow {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-
-		periph_clk: periph_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&a9pll>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-	};
-
-	axi@18000000 {
-		compatible = "brcm,bus-axi";
-		reg = <0x18000000 0x1000>;
-		ranges = <0x00000000 0x18000000 0x00100000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0x000fffff 0xffff>;
-		interrupt-map = 
-			/* ChipCommon */
-			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Switch Register Access Block */
-			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* PCIe Controller 0 */
-			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* PCIe Controller 1 */
-			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* PCIe Controller 2 */
-			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* USB 2.0 Controller */
-			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* USB 3.0 Controller */
-			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 0 */
-			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 1 */
-			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 2 */
-			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 3 */
-			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* NAND Controller */
-			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-
-		chipcommon: chipcommon@0 {
-			reg = <0x00000000 0x1000>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pcie0: pcie@12000 {
-			reg = <0x00012000 0x1000>;
-		};
-
-		pcie1: pcie@13000 {
-			reg = <0x00013000 0x1000>;
-		};
-
-		pcie2: pcie@14000 {
-			reg = <0x00014000 0x1000>;
-		};
-
-		usb2: usb2@21000 {
-			reg = <0x00021000 0x1000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			interrupt-parent = <&gic>;
-
-			ehci: usb@21000 {
-				#usb-cells = <0>;
-
-				compatible = "generic-ehci";
-				reg = <0x00021000 0x1000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ehci_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				ehci_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-
-			ohci: usb@22000 {
-				#usb-cells = <0>;
-
-				compatible = "generic-ohci";
-				reg = <0x00022000 0x1000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ohci_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				ohci_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		usb3: usb3@23000 {
-			reg = <0x00023000 0x1000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			interrupt-parent = <&gic>;
-
-			xhci: usb@23000 {
-				#usb-cells = <0>;
-
-				compatible = "generic-xhci";
-				reg = <0x00023000 0x1000>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb3_phy>;
-				phy-names = "usb";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				xhci_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		gmac0: ethernet@24000 {
-			reg = <0x24000 0x800>;
-		};
-
-		gmac1: ethernet@25000 {
-			reg = <0x25000 0x800>;
-		};
-
-		gmac2: ethernet@26000 {
-			reg = <0x26000 0x800>;
-		};
-
-		gmac3: ethernet@27000 {
-			reg = <0x27000 0x800>;
-		};
-	};
-
-	pwm: pwm@18002000 {
-		compatible = "brcm,iproc-pwm";
-		reg = <0x18002000 0x28>;
-		clocks = <&osc>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	mdio: mdio@18003000 {
-		compatible = "brcm,iproc-mdio";
-		reg = <0x18003000 0x8>;
-		#size-cells = <0>;
-		#address-cells = <1>;
-	};
-
-	mdio-mux@18003000 {
-		compatible = "mdio-mux-mmioreg", "mdio-mux";
-		mdio-parent-bus = <&mdio>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x18003000 0x4>;
-		mux-mask = <0x200>;
-
-		mdio@0 {
-			reg = <0x0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			usb3_phy: usb3-phy@10 {
-				compatible = "brcm,ns-ax-usb3-phy";
-				reg = <0x10>;
-				usb3-dmp-syscon = <&usb3_dmp>;
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-		};
-	};
-
-	usb3_dmp: syscon@18105000 {
-		reg = <0x18105000 0x1000>;
-	};
-
-	uart2: serial@18008000 {
-		compatible = "ns16550a";
-		reg = <0x18008000 0x20>;
-		clocks = <&iprocslow>;
-		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		status = "disabled";
-	};
-
-	i2c0: i2c@18009000 {
-		compatible = "brcm,iproc-i2c";
-		reg = <0x18009000 0x50>;
-		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
-
-	dmu-bus@1800c000 {
-		compatible = "simple-bus";
-		ranges = <0 0x1800c000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		cru-bus@100 {
-			compatible = "brcm,ns-cru", "simple-mfd";
-			reg = <0x100 0x1a4>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			lcpll0: clock-controller@100 {
-				#clock-cells = <1>;
-				compatible = "brcm,nsp-lcpll0";
-				reg = <0x100 0x14>;
-				clocks = <&osc>;
-				clock-output-names = "lcpll0", "pcie_phy",
-						     "sdio", "ddr_phy";
-			};
-
-			genpll: clock-controller@140 {
-				#clock-cells = <1>;
-				compatible = "brcm,nsp-genpll";
-				reg = <0x140 0x24>;
-				clocks = <&osc>;
-				clock-output-names = "genpll", "phy",
-						     "ethernetclk",
-						     "usbclk", "iprocfast",
-						     "sata1", "sata2";
-			};
-
-			usb2_phy: phy@164 {
-				compatible = "brcm,ns-usb2-phy";
-				reg = <0x164 0x4>;
-				brcm,syscon-clkset = <&cru_clkset>;
-				clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-				clock-names = "phy-ref-clk";
-				#phy-cells = <0>;
-			};
-
-			cru_clkset: syscon@180 {
-				compatible = "brcm,cru-clkset", "syscon";
-				reg = <0x180 0x4>;
-			};
-
-			pinctrl: pinctrl@1c0 {
-				compatible = "brcm,bcm4708-pinmux";
-				reg = <0x1c0 0x24>;
-				reg-names = "cru_gpio_control";
-
-				spi-pins {
-					groups = "spi_grp";
-					function = "spi";
-				};
-
-				pinmux_i2c: i2c-pins {
-					groups = "i2c_grp";
-					function = "i2c";
-				};
-
-				pinmux_pwm: pwm-pins {
-					groups = "pwm0_grp", "pwm1_grp",
-						 "pwm2_grp", "pwm3_grp";
-					function = "pwm";
-				};
-
-				pinmux_uart1: uart1-pins {
-					groups = "uart1_grp";
-					function = "uart1";
-				};
-			};
-
-			thermal: thermal@2c0 {
-				compatible = "brcm,ns-thermal";
-				reg = <0x2c0 0x10>;
-				#thermal-sensor-cells = <0>;
-			};
-		};
-	};
-
-	srab: ethernet-switch@18007000 {
-		compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
-		reg = <0x18007000 0x1000>;
-
-		status = "disabled";
-
-		/* ports are defined in board DTS */
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	rng: rng@18004000 {
-		compatible = "brcm,bcm5301x-rng";
-		reg = <0x18004000 0x14>;
-	};
-
-	nand_controller: nand-controller@18028000 {
-		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
-		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
-		reg-names = "nand", "iproc-idm", "iproc-ext";
-		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		brcm,nand-has-wp;
-	};
-
-	spi@18029200 {
-		compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
-		reg = <0x18029200 0x184>,
-		      <0x18029000 0x124>,
-		      <0x1811b408 0x004>,
-		      <0x180293a0 0x01c>;
-		reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "mspi_done",
-				  "mspi_halted",
-				  "spi_lr_fullness_reached",
-				  "spi_lr_session_aborted",
-				  "spi_lr_impatient",
-				  "spi_lr_session_done",
-				  "spi_lr_overread";
-		clocks = <&iprocmed>;
-		clock-names = "iprocmed";
-		num-cs = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		spi_nor: flash@0 {
-			compatible = "jedec,spi-nor";
-			reg = <0>;
-			spi-max-frequency = <20000000>;
-			status = "disabled";
-
-			partitions {
-				compatible = "brcm,bcm947xx-cfe-partitions";
-			};
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <1000>;
-			coefficients = <(-556) 418000>;
-			thermal-sensors = <&thermal>;
-
-			trips {
-				cpu-crit {
-					temperature = <125000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm59056.dtsi b/arch/arm/boot/dts/bcm59056.dtsi
deleted file mode 100644
index a9bb7ad81378..000000000000
--- a/arch/arm/boot/dts/bcm59056.dtsi
+++ /dev/null
@@ -1,91 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
-* Copyright 2014 Linaro Limited
-* Author: Matt Porter <mporter@linaro.org>
-*/
-
-&pmu {
-	compatible = "brcm,bcm59056";
-	regulators {
-		rfldo_reg: rfldo {
-		};
-
-		camldo1_reg: camldo1 {
-		};
-
-		camldo2_reg: camldo2 {
-		};
-
-		simldo1_reg: simldo1 {
-		};
-
-		simldo2_reg: simldo2 {
-		};
-
-		sdldo_reg: sdldo {
-		};
-
-		sdxldo_reg: sdxldo {
-		};
-
-		mmcldo1_reg: mmcldo1 {
-		};
-
-		mmcldo2_reg: mmcldo2 {
-		};
-
-		audldo_reg: audldo {
-		};
-
-		micldo_reg: micldo {
-		};
-
-		usbldo_reg: usbldo {
-		};
-
-		vibldo_reg: vibldo {
-		};
-
-		csr_reg: csr {
-		};
-
-		iosr1_reg: iosr1 {
-		};
-
-		iosr2_reg: iosr2 {
-		};
-
-		msr_reg: msr {
-		};
-
-		sdsr1_reg: sdsr1 {
-		};
-
-		sdsr2_reg: sdsr2 {
-		};
-
-		vsr_reg: vsr {
-		};
-
-		gpldo1_reg: gpldo1 {
-		};
-
-		gpldo2_reg: gpldo2 {
-		};
-
-		gpldo3_reg: gpldo3 {
-		};
-
-		gpldo4_reg: gpldo4 {
-		};
-
-		gpldo5_reg: gpldo5 {
-		};
-
-		gpldo6_reg: gpldo6 {
-		};
-
-		vbus_reg: vbus {
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
deleted file mode 100644
index b774a8d63813..000000000000
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ /dev/null
@@ -1,229 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Broadcom BCM63138 DSL SoCs Device Tree
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "brcm,bcm63138", "brcm,bcmbca";
-	model = "Broadcom BCM963138 Reference Board";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		uart0 = &serial0;
-		uart1 = &serial1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0>;
-			enable-method = "brcm,bcm63138";
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <1>;
-			enable-method = "brcm,bcm63138";
-			resets = <&pmb0 4 1>;
-		};
-	};
-
-	clocks {
-		/* UBUS peripheral clock */
-		periph_clk: periph_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-			clock-output-names = "periph";
-		};
-
-		/* peripheral clock for system timer */
-		axi_clk: axi_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&armpll>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		/* APB bus clock */
-		apb_clk: apb_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&armpll>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-	};
-
-	/* ARM bus */
-	axi@80000000 {
-		compatible = "simple-bus";
-		ranges = <0 0x80000000 0x784000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		L2: cache-controller@1d000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x1d000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-			cache-size = <524288>;
-			cache-sets = <1024>;
-			cache-line-size = <32>;
-			interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		scu: scu@1e000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0x1e000 0x100>;
-		};
-
-		gic: interrupt-controller@1f000 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0x1f000 0x1000
-				0x1e100 0x100>;
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-		};
-
-		global_timer: timer@1e200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x1e200 0x20>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&axi_clk>;
-		};
-
-		local_timer: local-timer@1e600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x1e600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&axi_clk>;
-		};
-
-		twd_watchdog: watchdog@1e620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0x1e620 0x20>;
-			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		armpll: armpll@20000 {
-			#clock-cells = <0>;
-			compatible = "brcm,bcm63138-armpll";
-			clocks = <&periph_clk>;
-			reg = <0x20000 0xf00>;
-		};
-
-		pmb0: reset-controller@4800c0 {
-			compatible = "brcm,bcm63138-pmb";
-			reg = <0x4800c0 0x10>;
-			#reset-cells = <2>;
-		};
-
-		pmb1: reset-controller@4800e0 {
-			compatible = "brcm,bcm63138-pmb";
-			reg = <0x4800e0 0x10>;
-			#reset-cells = <2>;
-		};
-
-		ahci: sata@a000 {
-			compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci";
-			reg-names = "ahci", "top-ctrl";
-			reg = <0xa000 0x9ac>, <0x8040 0x24>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&pmb0 3 1>;
-			reset-names = "ahci";
-			status = "disabled";
-
-			sata0: sata-port@0 {
-				reg = <0>;
-				phys = <&sata_phy0>;
-			};
-		};
-
-		sata_phy: sata-phy@8100 {
-			compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3";
-			reg = <0x8100 0x1e00>;
-			reg-names = "phy";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata_phy0: sata-phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-			};
-		};
-	};
-
-	/* Legacy UBUS base */
-	ubus@fffe8000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xfffe8000 0x8100>;
-
-		timer: timer@80 {
-			compatible = "brcm,bcm6328-timer", "syscon";
-			reg = <0x80 0x3c>;
-		};
-
-		serial0: serial@600 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x600 0x1b>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&periph_clk>;
-			clock-names = "periph";
-			status = "disabled";
-		};
-
-		serial1: serial@620 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x620 0x1b>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&periph_clk>;
-			clock-names = "periph";
-			status = "disabled";
-		};
-
-		nand_controller: nand-controller@2000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
-			reg = <0x2000 0x600>, <0xf0 0x10>;
-			reg-names = "nand", "nand-int-base";
-			status = "disabled";
-			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "nand";
-		};
-
-		bootlut: bootlut@8000 {
-			compatible = "brcm,bcm63138-bootlut";
-			reg = <0x8000 0x50>;
-		};
-
-		reboot {
-			compatible = "syscon-reboot";
-			regmap = <&timer>;
-			offset = <0x34>;
-			mask = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm63148.dtsi b/arch/arm/boot/dts/bcm63148.dtsi
deleted file mode 100644
index df5307b6b3af..000000000000
--- a/arch/arm/boot/dts/bcm63148.dtsi
+++ /dev/null
@@ -1,103 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "brcm,bcm63148", "brcm,bcmbca";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		B15_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "brcm,brahma-b15";
-			reg = <0x0>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		B15_1: cpu@1 {
-			device_type = "cpu";
-			compatible = "brcm,brahma-b15";
-			reg = <0x1>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		L2_0: l2-cache0 {
-			compatible = "cache";
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	pmu: pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&B15_0>, <&B15_1>;
-	};
-
-	clocks: clocks {
-		periph_clk: periph-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <50000000>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	axi@80030000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x80030000 0x8000>;
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a15-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x1000 0x1000>,
-				<0x2000 0x2000>,
-				<0x4000 0x2000>,
-				<0x6000 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
-					IRQ_TYPE_LEVEL_HIGH)>;
-		};
-	};
-
-	bus@ff800000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xfffe8000 0x8000>;
-
-		uart0: serial@600 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x600 0x20>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&periph_clk>;
-			clock-names = "refclk";
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi
deleted file mode 100644
index 5463443f0762..000000000000
--- a/arch/arm/boot/dts/bcm63178.dtsi
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "brcm,bcm63178", "brcm,bcmbca";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CA7_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		CA7_1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-		CA7_2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x2>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-		L2_0: l2-cache0 {
-			compatible = "cache";
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	pmu: pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&CA7_0>, <&CA7_1>,
-			<&CA7_2>;
-	};
-
-	clocks: clocks {
-		periph_clk: periph-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-		uart_clk: uart-clk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clocks = <&periph_clk>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-		cpu_off = <1>;
-		cpu_on = <2>;
-	};
-
-	axi@81000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x81000000 0x4000>;
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a7-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x1000 0x1000>,
-				<0x2000 0x2000>;
-		};
-	};
-
-	bus@ff800000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xff800000 0x800000>;
-
-		uart0: serial@12000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x12000 0x1000>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_clk>, <&uart_clk>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi
deleted file mode 100644
index e610c102498f..000000000000
--- a/arch/arm/boot/dts/bcm6846.dtsi
+++ /dev/null
@@ -1,103 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "brcm,bcm6846", "brcm,bcmbca";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CA7_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		CA7_1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		L2_0: l2-cache0 {
-			compatible = "cache";
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	pmu: pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&CA7_0>, <&CA7_1>;
-	};
-
-	clocks: clocks {
-		periph_clk: periph-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-		cpu_off = <1>;
-		cpu_on = <2>;
-	};
-
-	axi@81000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x81000000 0x4000>;
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a7-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x1000 0x1000>,
-				<0x2000 0x2000>;
-		};
-	};
-
-	bus@ff800000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xff800000 0x800000>;
-
-		uart0: serial@640 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x640 0x1b>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&periph_clk>;
-			clock-names = "refclk";
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm6855.dtsi b/arch/arm/boot/dts/bcm6855.dtsi
deleted file mode 100644
index 620f51aee1a2..000000000000
--- a/arch/arm/boot/dts/bcm6855.dtsi
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "brcm,bcm6855", "brcm,bcmbca";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CA7_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		CA7_1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		CA7_2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x2>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		L2_0: l2-cache0 {
-			compatible = "cache";
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	pmu: pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>;
-	};
-
-	clocks: clocks {
-		periph_clk: periph-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-
-		uart_clk: uart-clk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clocks = <&periph_clk>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	axi@81000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x81000000 0x8000>;
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a7-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
-			reg = <0x1000 0x1000>,
-				<0x2000 0x2000>,
-				<0x4000 0x2000>,
-				<0x6000 0x2000>;
-		};
-	};
-
-	bus@ff800000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xff800000 0x800000>;
-
-		uart0: serial@12000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x12000 0x1000>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_clk>, <&uart_clk>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi
deleted file mode 100644
index a7dff596fe1e..000000000000
--- a/arch/arm/boot/dts/bcm6878.dtsi
+++ /dev/null
@@ -1,110 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "brcm,bcm6878", "brcm,bcmbca";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CA7_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-
-		CA7_1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-		};
-		L2_0: l2-cache0 {
-			compatible = "cache";
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	pmu: pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&CA7_0>, <&CA7_1>;
-	};
-
-	clocks: clocks {
-		periph_clk: periph-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-		uart_clk: uart-clk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clocks = <&periph_clk>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	axi@81000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x81000000 0x8000>;
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a7-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x1000 0x1000>,
-				<0x2000 0x2000>,
-				<0x4000 0x2000>,
-				<0x6000 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
-					IRQ_TYPE_LEVEL_HIGH)>;
-		};
-	};
-
-	bus@ff800000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xff800000 0x800000>;
-
-		uart0: serial@12000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x12000 0x1000>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_clk>, <&uart_clk>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm947622.dts b/arch/arm/boot/dts/bcm947622.dts
deleted file mode 100644
index 6f083724ab8e..000000000000
--- a/arch/arm/boot/dts/bcm947622.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm47622.dtsi"
-
-/ {
-	model = "Broadcom BCM947622 Reference Board";
-	compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm963138.dts b/arch/arm/boot/dts/bcm963138.dts
deleted file mode 100644
index d28c4f130ca2..000000000000
--- a/arch/arm/boot/dts/bcm963138.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm63138.dtsi"
-
-/ {
-	model = "Broadcom BCM963138 Reference Board";
-	compatible = "brcm,bcm963138", "brcm,bcm63138", "brcm,bcmbca";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &serial0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-};
-
-&serial0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm963148.dts b/arch/arm/boot/dts/bcm963148.dts
deleted file mode 100644
index 98f6a6d09f50..000000000000
--- a/arch/arm/boot/dts/bcm963148.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm63148.dtsi"
-
-/ {
-	model = "Broadcom BCM963148 Reference Board";
-	compatible = "brcm,bcm963148", "brcm,bcm63148", "brcm,bcmbca";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm963178.dts b/arch/arm/boot/dts/bcm963178.dts
deleted file mode 100644
index fa096e9cde23..000000000000
--- a/arch/arm/boot/dts/bcm963178.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm63178.dtsi"
-
-/ {
-	model = "Broadcom BCM963178 Reference Board";
-	compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm96756.dts b/arch/arm/boot/dts/bcm96756.dts
deleted file mode 100644
index 9a4a87ba9c8a..000000000000
--- a/arch/arm/boot/dts/bcm96756.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6756.dtsi"
-
-/ {
-	model = "Broadcom BCM96756 Reference Board";
-	compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm96846.dts b/arch/arm/boot/dts/bcm96846.dts
deleted file mode 100644
index c70ebccabc19..000000000000
--- a/arch/arm/boot/dts/bcm96846.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6846.dtsi"
-
-/ {
-	model = "Broadcom BCM96846 Reference Board";
-	compatible = "brcm,bcm96846", "brcm,bcm6846", "brcm,bcmbca";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm96855.dts b/arch/arm/boot/dts/bcm96855.dts
deleted file mode 100644
index 4438152561ac..000000000000
--- a/arch/arm/boot/dts/bcm96855.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6855.dtsi"
-
-/ {
-	model = "Broadcom BCM96855 Reference Board";
-	compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm96878.dts b/arch/arm/boot/dts/bcm96878.dts
deleted file mode 100644
index 8fbc175cb452..000000000000
--- a/arch/arm/boot/dts/bcm96878.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6878.dtsi"
-
-/ {
-	model = "Broadcom BCM96878 Reference Board";
-	compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/broadcom/Makefile b/arch/arm/boot/dts/broadcom/Makefile
new file mode 100644
index 000000000000..2552e11b5e31
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/Makefile
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0
+# Enables support for device-tree overlays
+DTC_FLAGS_bcm2835-rpi-b := -@
+DTC_FLAGS_bcm2835-rpi-a := -@
+DTC_FLAGS_bcm2835-rpi-b-rev2 := -@
+DTC_FLAGS_bcm2835-rpi-b-plus := -@
+DTC_FLAGS_bcm2835-rpi-a-plus := -@
+DTC_FLAGS_bcm2835-rpi-cm1-io1 := -@
+DTC_FLAGS_bcm2836-rpi-2-b := -@
+DTC_FLAGS_bcm2837-rpi-2-b := -@
+DTC_FLAGS_bcm2837-rpi-3-a-plus := -@
+DTC_FLAGS_bcm2837-rpi-3-b := -@
+DTC_FLAGS_bcm2837-rpi-3-b-plus := -@
+DTC_FLAGS_bcm2837-rpi-cm3-io3 := -@
+DTC_FLAGS_bcm2837-rpi-zero-2-w := -@
+DTC_FLAGS_bcm2711-rpi-400 := -@
+DTC_FLAGS_bcm2711-rpi-4-b := -@
+DTC_FLAGS_bcm2711-rpi-cm4-io := -@
+DTC_FLAGS_bcm2835-rpi-zero := -@
+DTC_FLAGS_bcm2835-rpi-zero-w := -@
+dtb-$(CONFIG_ARCH_BCM2835) += \
+	bcm2835-rpi-b.dtb \
+	bcm2835-rpi-a.dtb \
+	bcm2835-rpi-b-rev2.dtb \
+	bcm2835-rpi-b-plus.dtb \
+	bcm2835-rpi-a-plus.dtb \
+	bcm2835-rpi-cm1-io1.dtb \
+	bcm2836-rpi-2-b.dtb \
+	bcm2837-rpi-2-b.dtb \
+	bcm2837-rpi-3-a-plus.dtb \
+	bcm2837-rpi-3-b.dtb \
+	bcm2837-rpi-3-b-plus.dtb \
+	bcm2837-rpi-cm3-io3.dtb \
+	bcm2837-rpi-zero-2-w.dtb \
+	bcm2711-rpi-400.dtb \
+	bcm2711-rpi-4-b.dtb \
+	bcm2711-rpi-cm4-io.dtb \
+	bcm2835-rpi-zero.dtb \
+	bcm2835-rpi-zero-w.dtb
+dtb-$(CONFIG_ARCH_BCMBCA) += \
+	bcm6846-genexis-xg6846b.dtb \
+	bcm947622.dtb \
+	bcm963138.dtb \
+	bcm963138dvt.dtb \
+	bcm963148.dtb \
+	bcm963178.dtb \
+	bcm96756.dtb \
+	bcm96846.dtb \
+	bcm96855.dtb \
+	bcm96878.dtb
+dtb-$(CONFIG_ARCH_BCM_5301X) += \
+	bcm4708-asus-rt-ac56u.dtb \
+	bcm4708-asus-rt-ac68u.dtb \
+	bcm4708-buffalo-wxr-1750dhp.dtb \
+	bcm4708-buffalo-wzr-1750dhp.dtb \
+	bcm4708-buffalo-wzr-1166dhp.dtb \
+	bcm4708-buffalo-wzr-1166dhp2.dtb \
+	bcm4708-linksys-ea6300-v1.dtb \
+	bcm4708-linksys-ea6500-v2.dtb \
+	bcm4708-luxul-xap-1510.dtb \
+	bcm4708-luxul-xwc-1000.dtb \
+	bcm4708-netgear-r6250.dtb \
+	bcm4708-netgear-r6300-v2.dtb \
+	bcm4708-smartrg-sr400ac.dtb \
+	bcm47081-asus-rt-n18u.dtb \
+	bcm47081-buffalo-wzr-600dhp2.dtb \
+	bcm47081-buffalo-wzr-900dhp.dtb \
+	bcm47081-luxul-xap-1410.dtb \
+	bcm47081-luxul-xwr-1200.dtb \
+	bcm47081-tplink-archer-c5-v2.dtb \
+	bcm4709-asus-rt-ac3200.dtb \
+	bcm4709-asus-rt-ac87u.dtb \
+	bcm4709-buffalo-wxr-1900dhp.dtb \
+	bcm4709-linksys-ea9200.dtb \
+	bcm4709-netgear-r7000.dtb \
+	bcm4709-netgear-r8000.dtb \
+	bcm4709-tplink-archer-c9-v1.dtb \
+	bcm47094-asus-rt-ac3100.dtb \
+	bcm47094-asus-rt-ac5300.dtb \
+	bcm47094-asus-rt-ac88u.dtb \
+	bcm47094-dlink-dir-885l.dtb \
+	bcm47094-dlink-dir-890l.dtb \
+	bcm47094-linksys-panamera.dtb \
+	bcm47094-luxul-abr-4500.dtb \
+	bcm47094-luxul-xap-1610.dtb \
+	bcm47094-luxul-xbr-4500.dtb \
+	bcm47094-luxul-xwc-2000.dtb \
+	bcm47094-luxul-xwr-3100.dtb \
+	bcm47094-luxul-xwr-3150-v1.dtb \
+	bcm47094-netgear-r8500.dtb \
+	bcm47094-phicomm-k3.dtb \
+	bcm53015-meraki-mr26.dtb \
+	bcm53016-dlink-dwl-8610ap.dtb \
+	bcm53016-meraki-mr32.dtb \
+	bcm94708.dtb \
+	bcm94709.dtb \
+	bcm953012er.dtb \
+	bcm953012hr.dtb \
+	bcm953012k.dtb
+dtb-$(CONFIG_ARCH_BCM_53573) += \
+	bcm47189-luxul-xap-1440.dtb \
+	bcm47189-luxul-xap-810.dtb \
+	bcm47189-tenda-ac9.dtb \
+	bcm947189acdbmr.dtb
+dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
+	bcm911360_entphn.dtb \
+	bcm911360k.dtb \
+	bcm958300k.dtb \
+	bcm958305k.dtb
+dtb-$(CONFIG_ARCH_BCM_HR2) += \
+	bcm53340-ubnt-unifi-switch8.dtb
+dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
+	bcm28155-ap.dtb \
+	bcm21664-garnet.dtb \
+	bcm23550-sparrow.dtb
+dtb-$(CONFIG_ARCH_BCM_NSP) += \
+	bcm958522er.dtb \
+	bcm958525er.dtb \
+	bcm958525xmc.dtb \
+	bcm958622hr.dtb \
+	bcm958623hr.dtb \
+	bcm958625-meraki-mx64.dtb \
+	bcm958625-meraki-mx64-a0.dtb \
+	bcm958625-meraki-mx64w.dtb \
+	bcm958625-meraki-mx64w-a0.dtb \
+	bcm958625-meraki-mx65.dtb \
+	bcm958625-meraki-mx65w.dtb \
+	bcm958625hr.dtb \
+	bcm988312hr.dtb \
+	bcm958625k.dtb
+dtb-$(CONFIG_ARCH_BRCMSTB) += \
+	bcm7445-bcm97445svmb.dtb
diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus-clock.dtsi
index 52f91a12a99a..52f91a12a99a 100644
--- a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-cygnus-clock.dtsi
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
index f9f79ed82518..07ca0d993c9f 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
@@ -167,6 +167,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&mailbox>;
 			interrupts = <0>;
 		};
@@ -247,6 +248,7 @@
 			gpio-controller;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		i2c1: i2c@1800b000 {
@@ -518,6 +520,7 @@
 			gpio-controller;
 
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 42 1>,
 					<&pinctrl 1 44 3>,
diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
index 33e6ba63a1ee..75545b10ef2f 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
@@ -54,8 +54,8 @@
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>;
 	};
 
@@ -200,6 +200,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/arch/arm/boot/dts/broadcom/bcm-ns.dtsi b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
new file mode 100644
index 000000000000..d0d5f7e52a91
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+#include <dt-bindings/clock/bcm-nsp.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts =
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	chipcommon-a-bus@18000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x00001000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@300 {
+			compatible = "ns16550";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			status = "disabled";
+		};
+
+		uart1: serial@400 {
+			compatible = "ns16550";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinmux_uart1>;
+			status = "disabled";
+		};
+	};
+
+	mpcore-bus@19000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x00023000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scu@20000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x20000 0x100>;
+		};
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+		};
+
+		timer@20600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: cache-controller@22000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			arm,shared-override;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			cache-level = <2>;
+		};
+	};
+
+	axi@18000000 {
+		compatible = "brcm,bus-axi";
+		reg = <0x18000000 0x1000>;
+		ranges = <0x00000000 0x18000000 0x00100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0x000fffff 0xffff>;
+		interrupt-map =
+			/* ChipCommon */
+			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Switch Register Access Block */
+			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 0 */
+			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 1 */
+			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 2 */
+			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 2.0 Controller */
+			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 3.0 Controller */
+			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 0 */
+			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 1 */
+			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 2 */
+			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 3 */
+			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* NAND Controller */
+			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+
+		chipcommon: chipcommon@0 {
+			reg = <0x00000000 0x1000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcie0: pcie@12000 {
+			reg = <0x00012000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+		};
+
+		pcie1: pcie@13000 {
+			reg = <0x00013000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+		};
+
+		pcie2: pcie@14000 {
+			reg = <0x00014000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+		};
+
+		usb2: usb2@21000 {
+			reg = <0x00021000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupt-parent = <&gic>;
+
+			ehci: usb@21000 {
+				compatible = "generic-ehci";
+				reg = <0x00021000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ehci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ehci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+
+			ohci: usb@22000 {
+				compatible = "generic-ohci";
+				reg = <0x00022000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ohci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ohci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		usb3: usb3@23000 {
+			reg = <0x00023000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupt-parent = <&gic>;
+
+			xhci: usb@23000 {
+				compatible = "generic-xhci";
+				reg = <0x00023000 0x1000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_phy>;
+				phy-names = "usb";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				xhci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		gmac0: ethernet@24000 {
+			reg = <0x24000 0x800>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac1: ethernet@25000 {
+			reg = <0x25000 0x800>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac2: ethernet@26000 {
+			reg = <0x26000 0x800>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac3: ethernet@27000 {
+			reg = <0x27000 0x800>;
+		};
+	};
+
+	pwm: pwm@18002000 {
+		compatible = "brcm,iproc-pwm";
+		reg = <0x18002000 0x28>;
+		clocks = <&osc>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	mdio: mdio@18003000 {
+		compatible = "brcm,iproc-mdio";
+		reg = <0x18003000 0x8>;
+		#size-cells = <0>;
+		#address-cells = <1>;
+	};
+
+	mdio-mux@18003000 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x18003000 0x4>;
+		mux-mask = <0x200>;
+
+		mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb3_phy: usb3-phy@10 {
+				compatible = "brcm,ns-ax-usb3-phy";
+				reg = <0x10>;
+				usb3-dmp-syscon = <&usb3_dmp>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	rng: rng@18004000 {
+		compatible = "brcm,bcm5301x-rng";
+		reg = <0x18004000 0x14>;
+	};
+
+	srab: ethernet-switch@18007000 {
+		compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
+		reg = <0x18007000 0x1000>;
+
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+
+			port@2 {
+				reg = <2>;
+			};
+
+			port@3 {
+				reg = <3>;
+			};
+
+			port@4 {
+				reg = <4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				ethernet = <&gmac0>;
+			};
+
+			port@7 {
+				reg = <7>;
+				ethernet = <&gmac1>;
+			};
+
+			port@8 {
+				reg = <8>;
+				ethernet = <&gmac2>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+
+	uart2: serial@18008000 {
+		compatible = "ns16550a";
+		reg = <0x18008000 0x20>;
+		clocks = <&iprocslow>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	dmu-bus@1800c000 {
+		compatible = "simple-bus";
+		ranges = <0 0x1800c000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cru-bus@100 {
+			compatible = "brcm,ns-cru", "simple-mfd";
+			reg = <0x100 0x1a4>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			usb2_phy: phy@164 {
+				compatible = "brcm,ns-usb2-phy";
+				reg = <0x164 0x4>;
+				brcm,syscon-clkset = <&cru_clkset>;
+				clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+				clock-names = "phy-ref-clk";
+				#phy-cells = <0>;
+			};
+
+			cru_clkset: syscon@180 {
+				compatible = "brcm,cru-clkset", "syscon";
+				reg = <0x180 0x4>;
+			};
+
+			pinctrl: pinctrl@1c0 {
+				compatible = "brcm,bcm4708-pinmux";
+				reg = <0x1c0 0x24>;
+				reg-names = "cru_gpio_control";
+
+				spi-pins {
+					groups = "spi_grp";
+					function = "spi";
+				};
+
+				pinmux_i2c: i2c-pins {
+					groups = "i2c_grp";
+					function = "i2c";
+				};
+
+				pinmux_pwm: pwm-pins {
+					groups = "pwm0_grp", "pwm1_grp",
+						 "pwm2_grp", "pwm3_grp";
+					function = "pwm";
+				};
+
+				pinmux_uart1: uart1-pins {
+					groups = "uart1_grp";
+					function = "uart1";
+				};
+			};
+
+			thermal: thermal@2c0 {
+				compatible = "brcm,ns-thermal";
+				reg = <0x2c0 0x10>;
+				#thermal-sensor-cells = <0>;
+			};
+		};
+	};
+
+	nand_controller: nand-controller@18028000 {
+		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
+		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
+		reg-names = "nand", "iproc-idm", "iproc-ext";
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		brcm,nand-has-wp;
+	};
+
+	usb3_dmp: syscon@18105000 {
+		reg = <0x18105000 0x1000>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			coefficients = <(-556) 418000>;
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm-nsp-ax.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp-ax.dtsi
index f2e941dbab10..f2e941dbab10 100644
--- a/arch/arm/boot/dts/bcm-nsp-ax.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-nsp-ax.dtsi
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
index 5b1dc58d40ba..6a4482c93167 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
@@ -72,8 +72,8 @@
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
@@ -180,6 +180,7 @@
 			gpio-controller;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 0 32>;
 		};
@@ -352,6 +353,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/broadcom/bcm11351.dtsi
index 53696078bbf0..53857e572080 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm11351.dtsi
@@ -1,11 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0-only
 // Copyright (C) 2012-2013 Broadcom Corporation
 
+#include <dt-bindings/clock/bcm281xx.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
-#include "dt-bindings/clock/bcm281xx.h"
-
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -50,44 +49,44 @@
 		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
 	};
 
-	uart@3e000000 {
+	uartb: serial@3e000000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e000000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>;
 		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
-	uart@3e001000 {
+	uartb2: serial@3e001000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e001000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>;
 		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
-	uart@3e002000 {
+	uartb3: serial@3e002000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e002000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
-	uart@3e003000 {
+	uartb4: serial@3e003000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e003000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
 	L2: l2-cache@3ff20000 {
@@ -112,20 +111,19 @@
 	gpio: gpio@35003000 {
 		compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
 		reg = <0x35003000 0x800>;
-		interrupts =
-		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		#interrupt-cells = <2>;
 		gpio-controller;
 		interrupt-controller;
 	};
 
-	sdio1: sdio@3f180000 {
+	sdio1: mmc@3f180000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f180000 0x10000>;
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -133,7 +131,7 @@
 		status = "disabled";
 	};
 
-	sdio2: sdio@3f190000 {
+	sdio2: mmc@3f190000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f190000 0x10000>;
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -141,7 +139,7 @@
 		status = "disabled";
 	};
 
-	sdio3: sdio@3f1a0000 {
+	sdio3: mmc@3f1a0000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1a0000 0x10000>;
 		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -149,7 +147,7 @@
 		status = "disabled";
 	};
 
-	sdio4: sdio@3f1b0000 {
+	sdio4: mmc@3f1b0000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1b0000 0x10000>;
 		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -162,7 +160,7 @@
 		reg = <0x35004800 0x430>;
 	};
 
-	i2c@3e016000 {
+	bsc1: i2c@3e016000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3e016000 0x80>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
@@ -172,7 +170,7 @@
 		status = "disabled";
 	};
 
-	i2c@3e017000 {
+	bsc2: i2c@3e017000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3e017000 0x80>;
 		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
@@ -182,7 +180,7 @@
 		status = "disabled";
 	};
 
-	i2c@3e018000 {
+	bsc3: i2c@3e018000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3e018000 0x80>;
 		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
@@ -192,7 +190,7 @@
 		status = "disabled";
 	};
 
-	i2c@3500d000 {
+	pmu_bsc: i2c@3500d000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3500d000 0x80>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts b/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts
new file mode 100644
index 000000000000..4f8ddc1b3ab7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm21664.dtsi"
+
+/ {
+	model = "BCM21664 Garnet board";
+	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+};
+
+&sdio1 {
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uartb {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm21664.dtsi b/arch/arm/boot/dts/broadcom/bcm21664.dtsi
new file mode 100644
index 000000000000..f0d0300079b6
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm21664.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
+
+#include "bcm2166x-common.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			enable-method = "brcm,bcm11351-cpu-method";
+			secondary-boot-reg = <0x35004178>;
+			reg = <1>;
+		};
+	};
+};
+
+&apps {
+		gic: interrupt-controller@1c01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x01c01000 0x1000>,
+				  <0x01c00100 0x100>;
+		};
+
+		L2: cache-controller@1c20000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x01c20000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+};
+
+&bsc1 {
+	compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
+
+&bsc2 {
+	compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
+
+&bsc3 {
+	compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
+
+&bsc4 {
+	compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
+
+&gpio {
+	compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
+};
+
+&smc {
+	compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi
new file mode 100644
index 000000000000..f535212cb52f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common device tree for components shared between the BCM21664 and BCM23550
+ * SoCs.
+ *
+ * Copyright (C) 2016 Broadcom
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/bcm21664.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/* Hub bus */
+	hub: hub-bus@34000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x34000000 0x102f83ac>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		smc: smc@4e000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */
+		};
+
+		resetmgr: reset-controller@1001f00 {
+			compatible = "brcm,bcm21664-resetmgr";
+			reg = <0x01001f00 0x24>;
+		};
+
+		gpio: gpio@1003000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x01003000 0x524>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+		};
+
+		pinctrl: pinctrl@1004800 {
+			compatible = "brcm,bcm21664-pinctrl";
+			reg = <0x01004800 0x7f4>;
+		};
+
+		timer@1006000 {
+			compatible = "brcm,kona-timer";
+			reg = <0x01006000 0x1c>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
+		};
+	};
+
+	/* Slaves bus */
+	slaves: slaves-bus@3e000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x3e000000 0x0001c070>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uartb: serial@0 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00000000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uartb2: serial@1000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00001000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uartb3: serial@2000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00002000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		bsc1: i2c@16000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x00016000 0x70>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
+			status = "disabled";
+		};
+
+		bsc2: i2c@17000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x00017000 0x70>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
+			status = "disabled";
+		};
+
+		bsc3: i2c@18000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x00018000 0x70>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
+			status = "disabled";
+		};
+
+		bsc4: i2c@1c000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x0001c000 0x70>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
+			status = "disabled";
+		};
+	};
+
+	/* Apps bus */
+	apps: apps-bus@3e300000 {
+		compatible = "simple-bus";
+		ranges = <0 0x3e300000 0x01c02000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		usbotg: usb@e20000 {
+			compatible = "snps,dwc2";
+			reg = <0x00e20000 0x10000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_otg_ahb_clk>;
+			clock-names = "otg";
+			phys = <&usbphy>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e30000 {
+			compatible = "brcm,kona-usb2-phy";
+			reg = <0x00e30000 0x28>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		sdio1: mmc@e80000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00e80000 0x801c>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
+			status = "disabled";
+		};
+
+		sdio2: mmc@e90000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00e90000 0x801c>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
+			status = "disabled";
+		};
+
+		sdio3: mmc@ea0000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00ea0000 0x801c>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
+			status = "disabled";
+		};
+
+		sdio4: mmc@eb0000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00eb0000 0x801c>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed clocks are defined before CCUs whose
+		 * clocks may depend on them.
+		 */
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		root_ccu: root_ccu@35001000 {
+			compatible = "brcm,bcm21664-root-ccu";
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		aon_ccu: aon_ccu@35002000 {
+			compatible = "brcm,bcm21664-aon-ccu";
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer";
+		};
+
+		slave_ccu: slave_ccu@3e011000 {
+			compatible = "brcm,bcm21664-slave-ccu";
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "bsc4";
+		};
+
+		master_ccu: master_ccu@3f001000 {
+			compatible = "brcm,bcm21664-master-ccu";
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "sdio1_sleep",
+					     "sdio2_sleep",
+					     "sdio3_sleep",
+					     "sdio4_sleep";
+		};
+	};
+};
+
+#include "bcm2166x-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi b/arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi
new file mode 100644
index 000000000000..51b8730c8fee
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common pinmux configrations for BCM2166x (BCM21664/BCM23550).
+ *
+ * Copyright (C) 2025 Artur Weber <aweber.kernel@gmail.com>
+ */
+
+&pinctrl {
+	/* BSC1 */
+	bsc1_pins: bsc1-pins {
+		bsc1clk-grp0 {
+			pins = "bsc1clk";
+			function = "alt1"; /* BSC1CLK */
+		};
+
+		bsc1dat-grp0 {
+			pins = "bsc1dat";
+			function = "alt1"; /* BSC1DAT */
+		};
+	};
+
+	/* BSC2 */
+	bsc2_pins: bsc2-pins {
+		bsc2clk-grp0 {
+			pins = "gpio16";
+			function = "alt2"; /* BSC2CLK */
+		};
+
+		bsc2dat-grp0 {
+			pins = "gpio17";
+			function = "alt2"; /* BSC2DAT */
+		};
+	};
+
+	/* BSC3 */
+	bsc3_pins: bsc3-pins {
+		bsc3clk-grp0 {
+			pins = "lcdscl";
+			function = "alt1"; /* BSC3_CLK */
+		};
+
+		bsc3dat-grp0 {
+			pins = "lcdsda";
+			function = "alt1"; /* BSC3_SDA */
+		};
+	};
+
+	/* BSC4 */
+	bsc4_pins: bsc4-pins {
+		bsc4clk-grp0 {
+			pins = "lcdres";
+			function = "alt1"; /* BSC4_CLK */
+		};
+
+		bsc4dat-grp0 {
+			pins = "lcdte";
+			function = "alt1"; /* BSC4_SDA */
+		};
+	};
+
+	/* PMBSC */
+	pmbsc_pins: pmbsc-pins {
+		pmbscclk-grp0 {
+			pins = "pmbscclk";
+			function = "alt1"; /* PMBSCCLK */
+		};
+
+		pmbscdat-grp0 {
+			pins = "pmbscdat";
+			function = "alt1"; /* PMBSCDAT */
+		};
+	};
+
+	/* SD */
+	sd_width1_pins: sd-width1-pins {
+		sdck-grp0 {
+			pins = "sdck";
+			function = "alt1"; /* SDCK */
+			bias-disable;
+		};
+
+		sdcmd-grp0 {
+			pins = "sdcmd";
+			function = "alt1"; /* SDCMD */
+			bias-pull-up;
+		};
+
+		sddat-grp0 {
+			pins = "sddat0";
+			function = "alt1"; /* SDDATx */
+			bias-pull-up;
+		};
+	};
+
+	sd_width4_pins: sd-width4-pins {
+		sdck-grp0 {
+			pins = "sdck";
+			function = "alt1"; /* SDCK */
+			bias-disable;
+		};
+
+		sdcmd-grp0 {
+			pins = "sdcmd";
+			function = "alt1"; /* SDCMD */
+			bias-pull-up;
+		};
+
+		sddat-grp0 {
+			pins = "sddat0", "sddat1", "sddat2", "sddat3";
+			function = "alt1"; /* SDDATx */
+			bias-pull-up;
+		};
+	};
+
+	/* SD1 */
+	sd1_width1_pins: sd1-width1-pins {
+		sd1ck-grp0 {
+			pins = "mmc1dat7";
+			function = "alt6"; /* SD1CK */
+			bias-disable;
+		};
+
+		sd1cmd-grp0 {
+			pins = "spi0txd";
+			function = "alt2"; /* SD1CMD */
+			bias-pull-up;
+		};
+
+		sd1dat0-grp0 {
+			pins = "mmc1dat5";
+			function = "alt6"; /* SD1DAT0 */
+			bias-pull-up;
+		};
+	};
+
+	sd1_width4_pins: sd1-width4-pins {
+		sd1ck-grp0 {
+			pins = "mmc1dat7";
+			function = "alt6"; /* SD1CK */
+			bias-disable;
+		};
+
+		sd1cmd-grp0 {
+			pins = "spi0txd";
+			function = "alt2"; /* SD1CMD */
+			bias-pull-up;
+		};
+
+		sd1dat0-grp0 {
+			pins = "mmc1dat5";
+			function = "alt6"; /* SD1DAT0 */
+			bias-pull-up;
+		};
+
+		sd1dat1-grp0 {
+			pins = "gpio93";
+			function = "alt1"; /* SD1DAT1 */
+			bias-pull-up;
+		};
+
+		sd1dat2-grp0 {
+			pins = "gpio94";
+			function = "alt1"; /* SD1DAT2 */
+			bias-pull-up;
+		};
+
+		sd1dat3-grp0 {
+			pins = "mmc1dat3";
+			function = "alt6"; /* SD1DAT3 */
+			bias-pull-up;
+		};
+	};
+
+	/* MMC0 */
+	mmc0_width1_pins: mmc0-width1-pins {
+		mmc0ck-grp0 {
+			pins = "mmc0ck";
+			function = "alt1"; /* MMC0CK */
+			bias-disable;
+		};
+
+		mmc0cmd-grp0 {
+			pins = "mmc0cmd";
+			function = "alt1"; /* MMC0CMD */
+			bias-pull-up;
+		};
+
+		mmc0dat-grp0 {
+			pins = "mmc0dat0";
+			function = "alt1"; /* MMC0DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc0_width4_pins: mmc0-width4-pins {
+		mmc0ck-grp0 {
+			pins = "mmc0ck";
+			function = "alt1"; /* MMC0CK */
+			bias-disable;
+		};
+
+		mmc0cmd-grp0 {
+			pins = "mmc0cmd";
+			function = "alt1"; /* MMC0CMD */
+			bias-pull-up;
+		};
+
+		mmc0dat-grp0 {
+			pins = "mmc0dat0", "mmc0dat1", "mmc0dat2", "mmc0dat3";
+			function = "alt1"; /* MMC0DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc0_width8_pins: mmc0-width8-pins {
+		mmc0ck-grp0 {
+			pins = "mmc0ck";
+			function = "alt1"; /* MMC0CK */
+			bias-disable;
+		};
+
+		mmc0cmd-grp0 {
+			pins = "mmc0cmd";
+			function = "alt1"; /* MMC0CMD */
+			bias-pull-up;
+		};
+
+		mmc0dat-grp0 {
+			pins = "mmc0dat0", "mmc0dat1", "mmc0dat2", "mmc0dat3",
+			       "mmc0dat4", "mmc0dat5", "mmc0dat6", "mmc0dat7";
+			function = "alt1"; /* MMC0DATx */
+			bias-pull-up;
+		};
+	};
+
+	/* MMC1 */
+	mmc1_width1_pins: mmc1-width1-pins {
+		mmc1ck-grp0 {
+			pins = "mmc1ck";
+			function = "alt1"; /* MMC1CK */
+			bias-disable;
+		};
+
+		mmc1cmd-grp0 {
+			pins = "mmc1cmd";
+			function = "alt1"; /* MMC1CMD */
+			bias-pull-up;
+		};
+
+		mmc1dat-grp0 {
+			pins = "mmc1dat0";
+			function = "alt1"; /* MMC1DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc1_width4_pins: mmc1-width4-pins {
+		mmc1ck-grp0 {
+			pins = "mmc1ck";
+			function = "alt1"; /* MMC1CK */
+			bias-disable;
+		};
+
+		mmc1cmd-grp0 {
+			pins = "mmc1cmd";
+			function = "alt1"; /* MMC1CMD */
+			bias-pull-up;
+		};
+
+		mmc1dat-grp0 {
+			pins = "mmc1dat0", "mmc1dat1", "mmc1dat2", "mmc1dat3";
+			function = "alt1"; /* MMC1DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc1_width8_pins: mmc1-width8-pins {
+		mmc1ck-grp0 {
+			pins = "mmc1ck";
+			function = "alt1"; /* MMC1CK */
+			bias-disable;
+		};
+
+		mmc1cmd-grp0 {
+			pins = "mmc1cmd";
+			function = "alt1"; /* MMC1CMD */
+			bias-pull-up;
+		};
+
+		mmc1dat-grp0 {
+			pins = "mmc1dat0", "mmc1dat1", "mmc1dat2", "mmc1dat3",
+			       "mmc1dat4", "mmc1dat5", "mmc1dat6", "mmc1dat7";
+			function = "alt1"; /* MMC1DATx */
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm23550-sparrow.dts b/arch/arm/boot/dts/broadcom/bcm23550-sparrow.dts
index ace77709f468..ace77709f468 100644
--- a/arch/arm/boot/dts/bcm23550-sparrow.dts
+++ b/arch/arm/boot/dts/broadcom/bcm23550-sparrow.dts
diff --git a/arch/arm/boot/dts/broadcom/bcm23550.dtsi b/arch/arm/boot/dts/broadcom/bcm23550.dtsi
new file mode 100644
index 000000000000..c1c69381286b
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm23550.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Device tree for the BCM23550 SoC.
+ *
+ * Copyright (C) 2016 Broadcom
+ */
+
+#include "bcm2166x-common.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <1>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <2>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <3>;
+			clock-frequency = <1000000000>;
+		};
+	};
+};
+
+&apps {
+		cdc: cdc@1b0e000 {
+			compatible = "brcm,bcm23550-cdc";
+			reg = <0x01b0e000 0x78>;
+		};
+
+		gic: interrupt-controller@1b21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x01b21000 0x1000>,
+			      <0x01b22000 0x1000>;
+		};
+};
+
+&bsc1 {
+	compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
+
+&bsc2 {
+	compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
+
+&bsc3 {
+	compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
+
+&bsc4 {
+	compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
+
+&gpio {
+	compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
+};
+
+&smc {
+	compatible = "brcm,bcm23550-smc", "brcm,kona-smc";
+};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
index 4432412044de..353bb50ce542 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
@@ -2,8 +2,10 @@
 /dts-v1/;
 #include "bcm2711.dtsi"
 #include "bcm2711-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-peripheral.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
+#include <dt-bindings/leds/common.h>
 
 / {
 	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
@@ -14,20 +16,14 @@
 		stdout-path = "serial1:115200n8";
 	};
 
-	leds {
-		led-act {
-			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
+	cam1_reg: regulator-cam1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cam1-reg";
+		enable-active-high;
+		gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
 	};
 
-	sd_io_1v8_reg: sd_io_1v8_reg {
+	sd_io_1v8_reg: regulator-sd-io-1v8 {
 		compatible = "regulator-gpio";
 		regulator-name = "vdd-sd-io";
 		regulator-min-microvolt = <1800000>;
@@ -41,7 +37,7 @@
 		status = "okay";
 	};
 
-	sd_vcc_reg: sd_vcc_reg {
+	sd_vcc_reg: regulator-sd-vcc {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc-sd";
 		regulator-min-microvolt = <3300000>;
@@ -156,6 +152,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led_pwr: led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pixelvalve0 {
 	status = "okay";
 };
@@ -196,6 +205,27 @@
 	phy1: ethernet-phy@1 {
 		/* No PHY interrupt */
 		reg = <0x1>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* LED1 */
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			/* LED2 */
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/bcm2711-rpi-400.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
index c53d9eb0b802..ca9be91b4f36 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-400.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
@@ -11,14 +11,6 @@
 		stdout-path = "serial1:115200n8";
 	};
 
-	leds {
-		/delete-node/ led-act;
-
-		led-pwr {
-			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
 	gpio-poweroff {
 		compatible = "gpio-poweroff";
 		gpios = <&expgpio 5 GPIO_ACTIVE_HIGH>;
@@ -38,8 +30,15 @@
 
 &genet_mdio {
 	clock-frequency = <1950000>;
+	/delete-node/ leds;
 };
 
+&led_pwr {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+/delete-node/ &led_act;
+
 &pm {
 	/delete-property/ system-power-controller;
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
new file mode 100644
index 000000000000..6bc77dd48c0d
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include <dt-bindings/leds/common.h>
+#include "bcm2711-rpi-cm4.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	model = "Raspberry Pi Compute Module 4 IO Board";
+};
+
+&ddc0 {
+	status = "okay";
+};
+
+&ddc1 {
+	status = "okay";
+};
+
+&gpio {
+	/*
+	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "RGMII_MDIO",
+			  "RGMIO_MDC",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  /* Shared with SPI flash */
+			  "PWM0_MISO",
+			  "PWM1_MOSI",
+			  "STATUS_LED_G_CLK",
+			  "SPIFLASH_CE_N",
+			  "SDA0",
+			  "SCL0",
+			  "RGMII_RXCLK",
+			  "RGMII_RXCTL",
+			  "RGMII_RXD0",
+			  "RGMII_RXD1",
+			  "RGMII_RXD2",
+			  "RGMII_RXD3",
+			  "RGMII_TXCLK",
+			  "RGMII_TXCTL",
+			  "RGMII_TXD0",
+			  "RGMII_TXD1",
+			  "RGMII_TXD2",
+			  "RGMII_TXD3";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&genet {
+	status = "okay";
+};
+
+&i2c0_1 {
+	rtc@51 {
+		/* Attention: An alarm resets the machine */
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+};
+
+&phy1 {
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* LED2 */
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		/* LED3 */
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+	};
+};
+
+&led_act {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pixelvalve0 {
+	status = "okay";
+};
+
+&pixelvalve1 {
+	status = "okay";
+};
+
+&pixelvalve2 {
+	status = "okay";
+};
+
+&pixelvalve4 {
+	status = "okay";
+};
+
+&vc4 {
+	status = "okay";
+};
+
+&vec {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi
index a2954d466a73..48e63ab7848c 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi
@@ -12,7 +12,7 @@
 		stdout-path = "serial1:115200n8";
 	};
 
-	sd_io_1v8_reg: sd_io_1v8_reg {
+	sd_io_1v8_reg: regulator-sd-io-1v8 {
 		compatible = "regulator-gpio";
 		regulator-name = "vdd-sd-io";
 		regulator-min-microvolt = <1800000>;
@@ -26,7 +26,7 @@
 		status = "okay";
 	};
 
-	sd_vcc_reg: sd_vcc_reg {
+	sd_vcc_reg: regulator-sd-vcc {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc-sd";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
index 98817a6675b9..c78ed064d166 100644
--- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
@@ -16,14 +16,33 @@
 		pcie0 = &pcie0;
 		blconfig = &blconfig;
 	};
-};
 
-&firmware {
-	firmware_clocks: clocks {
-		compatible = "raspberrypi,firmware-clocks";
-		#clock-cells = <1>;
+	i2c0mux: i2c-mux0 {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c0>;
+
+		pinctrl-names = "i2c0", "i2c0-vc";
+		pinctrl-0 = <&i2c0_gpio0>;
+		pinctrl-1 = <&i2c0_gpio44>;
+
+		i2c0_0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c0_1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
 	};
+};
 
+&firmware {
 	expgpio: gpio {
 		compatible = "raspberrypi,firmware-gpio";
 		gpio-controller;
@@ -53,6 +72,11 @@
 	clocks = <&firmware_clocks 4>;
 };
 
+&i2c0 {
+	/delete-property/ pinctrl-names;
+	/delete-property/ pinctrl-0;
+};
+
 &rmem {
 	/*
 	 * RPi4's co-processor will copy the board's bootloader configuration
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
index 941c4d16791b..c06d9f5e53c8 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
@@ -48,7 +48,7 @@
 		 * This node is the provider for the enable-method for
 		 * bringing up secondary cores.
 		 */
-		local_intc: local_intc@40000000 {
+		local_intc: interrupt-controller@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 		};
@@ -76,7 +76,7 @@
 			};
 		};
 
-		dma: dma@7e007000 {
+		dma: dma-controller@7e007000 {
 			compatible = "brcm,bcm2835-dma";
 			reg = <0x7e007000 0xb00>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
@@ -134,7 +134,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -145,7 +145,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -156,7 +156,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -167,7 +167,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -278,7 +278,7 @@
 			clocks = <&clocks BCM2835_CLOCK_PWM>;
 			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
 			assigned-clock-rates = <10000000>;
-			#pwm-cells = <2>;
+			#pwm-cells = <3>;
 			status = "disabled";
 		};
 
@@ -432,8 +432,8 @@
 		};
 	};
 
-	arm-pmu {
-		compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3";
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 			<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -451,8 +451,6 @@
 					  IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
 					  IRQ_TYPE_LEVEL_LOW)>;
-		/* This only applies to the ARMv7 stub */
-		arm,cpu-registers-not-fw-configured;
 	};
 
 	cpus: cpus {
@@ -536,6 +534,7 @@
 		 */
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
@@ -603,6 +602,21 @@
 			};
 		};
 
+		xhci: usb@7e9c0000 {
+			compatible = "brcm,bcm2711-xhci", "brcm,xhci-brcm-v2";
+			reg = <0x0 0x7e9c0000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pm BCM2835_POWER_DOMAIN_USB>;
+			/* DWC2 and this IP block share the same USB PHY,
+			 * enabling both at the same time results in lockups.
+			 * So keep this node disabled and let the bootloader
+			 * decide which interface should be enabled.
+			 */
+			status = "disabled";
+		};
+
 		v3d: gpu@7ec00000 {
 			compatible = "brcm,2711-v3d";
 			reg = <0x0 0x7ec00000 0x4000>,
@@ -647,21 +661,21 @@
 
 	gpio-ranges = <&gpio 0 0 58>;
 
-	gpclk0_gpio49: gpclk0_gpio49 {
+	gpclk0_gpio49: gpclk0-gpio49 {
 		pin-gpclk {
 			pins = "gpio49";
 			function = "alt1";
 			bias-disable;
 		};
 	};
-	gpclk1_gpio50: gpclk1_gpio50 {
+	gpclk1_gpio50: gpclk1-gpio50 {
 		pin-gpclk {
 			pins = "gpio50";
 			function = "alt1";
 			bias-disable;
 		};
 	};
-	gpclk2_gpio51: gpclk2_gpio51 {
+	gpclk2_gpio51: gpclk2-gpio51 {
 		pin-gpclk {
 			pins = "gpio51";
 			function = "alt1";
@@ -669,7 +683,7 @@
 		};
 	};
 
-	i2c0_gpio46: i2c0_gpio46 {
+	i2c0_gpio46: i2c0-gpio46 {
 		pin-sda {
 			function = "alt0";
 			pins = "gpio46";
@@ -681,7 +695,7 @@
 			bias-disable;
 		};
 	};
-	i2c1_gpio46: i2c1_gpio46 {
+	i2c1_gpio46: i2c1-gpio46 {
 		pin-sda {
 			function = "alt1";
 			pins = "gpio46";
@@ -693,7 +707,7 @@
 			bias-disable;
 		};
 	};
-	i2c3_gpio2: i2c3_gpio2 {
+	i2c3_gpio2: i2c3-gpio2 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio2";
@@ -705,7 +719,7 @@
 			bias-disable;
 		};
 	};
-	i2c3_gpio4: i2c3_gpio4 {
+	i2c3_gpio4: i2c3-gpio4 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio4";
@@ -717,7 +731,7 @@
 			bias-disable;
 		};
 	};
-	i2c4_gpio6: i2c4_gpio6 {
+	i2c4_gpio6: i2c4-gpio6 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio6";
@@ -729,7 +743,7 @@
 			bias-disable;
 		};
 	};
-	i2c4_gpio8: i2c4_gpio8 {
+	i2c4_gpio8: i2c4-gpio8 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio8";
@@ -741,7 +755,7 @@
 			bias-disable;
 		};
 	};
-	i2c5_gpio10: i2c5_gpio10 {
+	i2c5_gpio10: i2c5-gpio10 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio10";
@@ -753,7 +767,7 @@
 			bias-disable;
 		};
 	};
-	i2c5_gpio12: i2c5_gpio12 {
+	i2c5_gpio12: i2c5-gpio12 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio12";
@@ -765,7 +779,7 @@
 			bias-disable;
 		};
 	};
-	i2c6_gpio0: i2c6_gpio0 {
+	i2c6_gpio0: i2c6-gpio0 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio0";
@@ -777,7 +791,7 @@
 			bias-disable;
 		};
 	};
-	i2c6_gpio22: i2c6_gpio22 {
+	i2c6_gpio22: i2c6-gpio22 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio22";
@@ -789,7 +803,7 @@
 			bias-disable;
 		};
 	};
-	i2c_slave_gpio8: i2c_slave_gpio8 {
+	i2c_slave_gpio8: i2c-slave-gpio8 {
 		pins-i2c-slave {
 			pins = "gpio8",
 			       "gpio9",
@@ -799,7 +813,7 @@
 		};
 	};
 
-	jtag_gpio48: jtag_gpio48 {
+	jtag_gpio48: jtag-gpio48 {
 		pins-jtag {
 			pins = "gpio48",
 			       "gpio49",
@@ -811,7 +825,7 @@
 		};
 	};
 
-	mii_gpio28: mii_gpio28 {
+	mii_gpio28: mii-gpio28 {
 		pins-mii {
 			pins = "gpio28",
 			       "gpio29",
@@ -820,7 +834,7 @@
 			function = "alt4";
 		};
 	};
-	mii_gpio36: mii_gpio36 {
+	mii_gpio36: mii-gpio36 {
 		pins-mii {
 			pins = "gpio36",
 			       "gpio37",
@@ -830,7 +844,7 @@
 		};
 	};
 
-	pcm_gpio50: pcm_gpio50 {
+	pcm_gpio50: pcm-gpio50 {
 		pins-pcm {
 			pins = "gpio50",
 			       "gpio51",
@@ -840,63 +854,63 @@
 		};
 	};
 
-	pwm0_0_gpio12: pwm0_0_gpio12 {
+	pwm0_0_gpio12: pwm0-0-gpio12 {
 		pin-pwm {
 			pins = "gpio12";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_0_gpio18: pwm0_0_gpio18 {
+	pwm0_0_gpio18: pwm0-0-gpio18 {
 		pin-pwm {
 			pins = "gpio18";
 			function = "alt5";
 			bias-disable;
 		};
 	};
-	pwm1_0_gpio40: pwm1_0_gpio40 {
+	pwm1_0_gpio40: pwm1-0-gpio40 {
 		pin-pwm {
 			pins = "gpio40";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio13: pwm0_1_gpio13 {
+	pwm0_1_gpio13: pwm0-1-gpio13 {
 		pin-pwm {
 			pins = "gpio13";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio19: pwm0_1_gpio19 {
+	pwm0_1_gpio19: pwm0-1-gpio19 {
 		pin-pwm {
 			pins = "gpio19";
 			function = "alt5";
 			bias-disable;
 		};
 	};
-	pwm1_1_gpio41: pwm1_1_gpio41 {
+	pwm1_1_gpio41: pwm1-1-gpio41 {
 		pin-pwm {
 			pins = "gpio41";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio45: pwm0_1_gpio45 {
+	pwm0_1_gpio45: pwm0-1-gpio45 {
 		pin-pwm {
 			pins = "gpio45";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_0_gpio52: pwm0_0_gpio52 {
+	pwm0_0_gpio52: pwm0-0-gpio52 {
 		pin-pwm {
 			pins = "gpio52";
 			function = "alt1";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio53: pwm0_1_gpio53 {
+	pwm0_1_gpio53: pwm0-1-gpio53 {
 		pin-pwm {
 			pins = "gpio53";
 			function = "alt1";
@@ -904,7 +918,7 @@
 		};
 	};
 
-	rgmii_gpio35: rgmii_gpio35 {
+	rgmii_gpio35: rgmii-gpio35 {
 		pin-start-stop {
 			pins = "gpio35";
 			function = "alt4";
@@ -914,26 +928,26 @@
 			function = "alt4";
 		};
 	};
-	rgmii_irq_gpio34: rgmii_irq_gpio34 {
+	rgmii_irq_gpio34: rgmii-irq-gpio34 {
 		pin-irq {
 			pins = "gpio34";
 			function = "alt5";
 		};
 	};
-	rgmii_irq_gpio39: rgmii_irq_gpio39 {
+	rgmii_irq_gpio39: rgmii-irq-gpio39 {
 		pin-irq {
 			pins = "gpio39";
 			function = "alt4";
 		};
 	};
-	rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
+	rgmii_mdio_gpio28: rgmii-mdio-gpio28 {
 		pins-mdio {
 			pins = "gpio28",
 			       "gpio29";
 			function = "alt5";
 		};
 	};
-	rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
+	rgmii_mdio_gpio37: rgmii-mdio-gpio37 {
 		pins-mdio {
 			pins = "gpio37",
 			       "gpio38";
@@ -941,7 +955,7 @@
 		};
 	};
 
-	spi0_gpio46: spi0_gpio46 {
+	spi0_gpio46: spi0-gpio46 {
 		pins-spi {
 			pins = "gpio46",
 			       "gpio47",
@@ -950,7 +964,7 @@
 			function = "alt2";
 		};
 	};
-	spi2_gpio46: spi2_gpio46 {
+	spi2_gpio46: spi2-gpio46 {
 		pins-spi {
 			pins = "gpio46",
 			       "gpio47",
@@ -960,7 +974,7 @@
 			function = "alt5";
 		};
 	};
-	spi3_gpio0: spi3_gpio0 {
+	spi3_gpio0: spi3-gpio0 {
 		pins-spi {
 			pins = "gpio0",
 			       "gpio1",
@@ -969,7 +983,7 @@
 			function = "alt3";
 		};
 	};
-	spi4_gpio4: spi4_gpio4 {
+	spi4_gpio4: spi4-gpio4 {
 		pins-spi {
 			pins = "gpio4",
 			       "gpio5",
@@ -978,7 +992,7 @@
 			function = "alt3";
 		};
 	};
-	spi5_gpio12: spi5_gpio12 {
+	spi5_gpio12: spi5-gpio12 {
 		pins-spi {
 			pins = "gpio12",
 			       "gpio13",
@@ -987,7 +1001,7 @@
 			function = "alt3";
 		};
 	};
-	spi6_gpio18: spi6_gpio18 {
+	spi6_gpio18: spi6-gpio18 {
 		pins-spi {
 			pins = "gpio18",
 			       "gpio19",
@@ -997,7 +1011,7 @@
 		};
 	};
 
-	uart2_gpio0: uart2_gpio0 {
+	uart2_gpio0: uart2-gpio0 {
 		pin-tx {
 			pins = "gpio0";
 			function = "alt4";
@@ -1009,7 +1023,7 @@
 			bias-pull-up;
 		};
 	};
-	uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
+	uart2_ctsrts_gpio2: uart2-ctsrts-gpio2 {
 		pin-cts {
 			pins = "gpio2";
 			function = "alt4";
@@ -1021,7 +1035,7 @@
 			bias-disable;
 		};
 	};
-	uart3_gpio4: uart3_gpio4 {
+	uart3_gpio4: uart3-gpio4 {
 		pin-tx {
 			pins = "gpio4";
 			function = "alt4";
@@ -1033,7 +1047,7 @@
 			bias-pull-up;
 		};
 	};
-	uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
+	uart3_ctsrts_gpio6: uart3-ctsrts-gpio6 {
 		pin-cts {
 			pins = "gpio6";
 			function = "alt4";
@@ -1045,7 +1059,7 @@
 			bias-disable;
 		};
 	};
-	uart4_gpio8: uart4_gpio8 {
+	uart4_gpio8: uart4-gpio8 {
 		pin-tx {
 			pins = "gpio8";
 			function = "alt4";
@@ -1057,7 +1071,7 @@
 			bias-pull-up;
 		};
 	};
-	uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
+	uart4_ctsrts_gpio10: uart4-ctsrts-gpio10 {
 		pin-cts {
 			pins = "gpio10";
 			function = "alt4";
@@ -1069,7 +1083,7 @@
 			bias-disable;
 		};
 	};
-	uart5_gpio12: uart5_gpio12 {
+	uart5_gpio12: uart5-gpio12 {
 		pin-tx {
 			pins = "gpio12";
 			function = "alt4";
@@ -1081,7 +1095,7 @@
 			bias-pull-up;
 		};
 	};
-	uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
+	uart5_ctsrts_gpio14: uart5-ctsrts-gpio14 {
 		pin-cts {
 			pins = "gpio14";
 			function = "alt4";
@@ -1099,6 +1113,14 @@
 	#address-cells = <2>;
 };
 
+&csi0 {
+	interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&csi1 {
+	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &cma {
 	/*
 	 * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
@@ -1154,6 +1176,7 @@
 };
 
 &uart0 {
+	arm,primecell-periphid = <0x00341011>;
 	interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 };
 
diff --git a/arch/arm/boot/dts/broadcom/bcm28155-ap.dts b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
new file mode 100644
index 000000000000..cefaa9a3c45c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2013 Broadcom Corporation
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm11351.dtsi"
+
+/ {
+	model = "BCM28155 AP board";
+	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+};
+
+&bsc1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&bsc2 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&bsc3 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&pmu_bsc {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmu: pmu@8 {
+		compatible = "brcm,bcm59056";
+		interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x08>;
+
+		regulators {
+			camldo1_reg: camldo1 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			sdldo_reg: sdldo {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			sdxldo_reg: sdxldo {
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			usbldo_reg: usbldo {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			iosr1_reg: iosr1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&pwm {
+	status = "okay";
+};
+
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	vmmc-supply = <&camldo1_reg>;
+	vqmmc-supply = <&iosr1_reg>;
+	status = "okay";
+};
+
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&sdldo_reg>;
+	vqmmc-supply = <&sdxldo_reg>;
+	status = "okay";
+};
+
+&uartb {
+	status = "okay";
+};
+
+&usbotg {
+	vusb_d-supply = <&usbldo_reg>;
+	vusb_a-supply = <&iosr1_reg>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi
index a037d2bc5b11..9261b67dbee1 100644
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi
@@ -8,7 +8,7 @@
 	interrupt-parent = <&intc>;
 
 	soc {
-		dma: dma@7e007000 {
+		dma: dma-controller@7e007000 {
 			compatible = "brcm,bcm2835-dma";
 			reg = <0x7e007000 0xf00>;
 			interrupts = <1 16>,
@@ -152,41 +152,41 @@
 };
 
 &gpio {
-	i2c_slave_gpio18: i2c_slave_gpio18 {
+	i2c_slave_gpio18: i2c-slave-gpio18 {
 		brcm,pins = <18 19 20 21>;
 		brcm,function = <BCM2835_FSEL_ALT3>;
 	};
 
-	jtag_gpio4: jtag_gpio4 {
+	jtag_gpio4: jtag-gpio4 {
 		brcm,pins = <4 5 6 12 13>;
 		brcm,function = <BCM2835_FSEL_ALT5>;
 	};
 
-	pwm0_gpio12: pwm0_gpio12 {
+	pwm0_gpio12: pwm0-gpio12 {
 		brcm,pins = <12>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm0_gpio18: pwm0_gpio18 {
+	pwm0_gpio18: pwm0-gpio18 {
 		brcm,pins = <18>;
 		brcm,function = <BCM2835_FSEL_ALT5>;
 	};
-	pwm0_gpio40: pwm0_gpio40 {
+	pwm0_gpio40: pwm0-gpio40 {
 		brcm,pins = <40>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm1_gpio13: pwm1_gpio13 {
+	pwm1_gpio13: pwm1-gpio13 {
 		brcm,pins = <13>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm1_gpio19: pwm1_gpio19 {
+	pwm1_gpio19: pwm1-gpio19 {
 		brcm,pins = <19>;
 		brcm,function = <BCM2835_FSEL_ALT5>;
 	};
-	pwm1_gpio41: pwm1_gpio41 {
+	pwm1_gpio41: pwm1-gpio41 {
 		brcm,pins = <41>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm1_gpio45: pwm1_gpio45 {
+	pwm1_gpio45: pwm1-gpio45 {
 		brcm,pins = <45>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a-plus.dts
index 9b9a18bbb20a..069b48272aa5 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a-plus.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
 / {
@@ -12,19 +14,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
@@ -92,6 +81,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
@@ -107,6 +97,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a.dts
index f664e4fced93..2726c00431e8 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
 / {
@@ -12,12 +14,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &gpio {
@@ -87,6 +83,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
 
 	/* I2S interface */
@@ -102,6 +99,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-plus.dts
index 248feb2ed23d..c57b999a4520 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-plus.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,19 +15,6 @@
 		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
@@ -94,6 +83,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
@@ -109,6 +99,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-rev2.dts
index f5b66d3f4ff3..ae6d3a9586ab 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-rev2.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9512.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,12 +15,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &gpio {
@@ -87,6 +83,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
 
 	/* I2S interface */
@@ -102,6 +99,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts
index f589bede2b11..72764be75a79 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9512.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,12 +15,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &gpio {
@@ -87,6 +83,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0>;
 };
 
@@ -96,6 +93,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1-io1.dts
index 87958a96c3e0..3f9d198ac3ab 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1-io1.dts
@@ -73,6 +73,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0>;
 };
 
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1.dtsi
index e4e6b6abbfc1..750cd76948e3 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1.dtsi
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 
 / {
 	leds {
@@ -32,6 +34,10 @@
 	};
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+};
+
 &sdhost {
 	non-removable;
 	vmmc-supply = <&reg_3v3>;
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi
new file mode 100644
index 000000000000..8b3c21d9f333
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's
+ * firmware interface.
+ */
+
+#include <dt-bindings/power/raspberrypi-power.h>
+
+&hdmi {
+	clocks = <&firmware_clocks 9>,
+		 <&firmware_clocks 13>;
+	clock-names = "pixel", "hdmi";
+};
+
+&v3d {
+	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
+};
+
+&vec {
+	clocks = <&firmware_clocks 15>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts
index 596bb1ef994e..1f0b163e400c 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-otg.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
 
@@ -22,12 +24,6 @@
 		/* 8250 auxiliary UART instead of pl011 */
 		stdout-path = "serial1:115200n8";
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &bt {
@@ -101,6 +97,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0>;
 };
 
@@ -110,7 +107,12 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+};
+
 &sdhci {
+	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
 };
 
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero.dts
index a65c2bca69ea..539c19c10946 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-otg.dtsi"
 
 / {
@@ -16,12 +18,6 @@
 		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
 &gpio {
@@ -89,6 +85,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
@@ -104,6 +101,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
 &sdhost {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdhost_gpio48>;
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi
new file mode 100644
index 000000000000..e9bf41b9f5c1
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi
@@ -0,0 +1,84 @@
+#include <dt-bindings/power/raspberrypi-power.h>
+
+/ {
+	soc {
+		firmware: firmware {
+			compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+			mboxes = <&mailbox>;
+
+			firmware_clocks: clocks {
+				compatible = "raspberrypi,firmware-clocks";
+				#clock-cells = <1>;
+			};
+		};
+
+		power: power {
+			compatible = "raspberrypi,bcm2835-power";
+			firmware = <&firmware>;
+			#power-domain-cells = <1>;
+		};
+
+		vchiq: mailbox@7e00b840 {
+			compatible = "brcm,bcm2835-vchiq";
+			reg = <0x7e00b840 0x3c>;
+			interrupts = <0 2>;
+		};
+	};
+};
+
+&csi0 {
+	clocks = <&clocks BCM2835_CLOCK_CAM0>,
+		 <&firmware_clocks 4>;
+	clock-names = "lp", "vpu";
+	power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>;
+};
+
+&csi1 {
+	clocks = <&clocks BCM2835_CLOCK_CAM1>,
+		 <&firmware_clocks 4>;
+	clock-names = "lp", "vpu";
+	power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
+};
+
+&gpio {
+	gpioout: gpioout {
+		brcm,pins = <6>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	alt0: alt0 {
+		brcm,pins = <4 5 7 8 9 10 11>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_gpio0>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_gpio2>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&usb {
+	power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
+
+&vec {
+	power-domains = <&power RPI_POWER_DOMAIN_VEC>;
+	status = "okay";
+};
+
+&dsi0 {
+	power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
+};
+
+&dsi1 {
+	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
+};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/broadcom/bcm2835.dtsi
index 1c90e5a44283..15cb331febbb 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2835.dtsi
@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
-#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2835";
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/broadcom/bcm2836-rpi-2-b.dts
index 3635502b1e0a..79918033750e 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2836-rpi-2-b.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 #include "bcm2836.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,19 +14,6 @@
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
@@ -94,6 +82,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
@@ -109,6 +98,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2836-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2836-rpi.dtsi
index c4c858b984c6..48b03b55ff56 100644
--- a/arch/arm/boot/dts/bcm2836-rpi.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2836-rpi.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
 
 &vchiq {
 	compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq";
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/broadcom/bcm2836.dtsi
index 534dacfc4dd5..783fe624ba68 100644
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2836.dtsi
@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
-#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2836";
@@ -11,7 +10,7 @@
 			 <0x40000000 0x40000000 0x00001000>;
 		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
 
-		local_intc: local_intc@40000000 {
+		local_intc: interrupt-controller@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;
@@ -113,6 +112,7 @@
 		 */
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts
new file mode 100644
index 000000000000..1868cee05853
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,2-model-b-rev2", "brcm,bcm2837";
+	model = "Raspberry Pi 2 Model B rev 1.2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_2b_1p2_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "LAN_RUN",
+			  "CAM_GPIO1",
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "PWR_LOW_N",
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "USB_LIMIT",
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "CAM_GPIO0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  "ETH_CLK",
+			  "PWM1_OUT",
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
index f7222a28903e..3548306dfbcb 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
 
@@ -18,19 +19,6 @@
 		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &firmware {
@@ -124,6 +112,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
index ec721d323ac5..2f1800cbc522 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
@@ -3,6 +3,7 @@
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
 #include "bcm283x-rpi-lan7515.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
 
@@ -19,19 +20,6 @@
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &bt {
@@ -130,6 +118,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index fb6a417d73e7..61270340075c 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
@@ -19,12 +20,6 @@
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
 &bt {
@@ -129,6 +124,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
+};
+
 /* uart0 communicates with the BT module */
 &uart0 {
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
index cf84e69fced8..85f54fa595aa 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
@@ -72,11 +72,12 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0>;
 };
 
 &hdmi {
-	hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+	hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>;
 	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3.dtsi
index f57b4ca145dd..1e4e4946b6b6 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3.dtsi
@@ -9,14 +9,6 @@
 		reg = <0 0x40000000>;
 	};
 
-	leds {
-		/*
-		 * Since there is no upstream GPIO driver yet,
-		 * remove the incomplete node.
-		 */
-		/delete-node/ led-act;
-	};
-
 	reg_3v3: fixed-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
index 4a768562985e..85cf594724ef 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-otg.dtsi"
 #include "bcm283x-rpi-wifi-bt.dtsi"
 
@@ -22,12 +23,6 @@
 		/* 8250 auxiliary UART instead of pl011 */
 		stdout-path = "serial1:115200n8";
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &bt {
@@ -100,6 +95,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0>;
 };
 
@@ -109,7 +105,12 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+};
+
 &sdhci {
+	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
 };
 
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/broadcom/bcm2837.dtsi
index 5dbdebc46259..c281697142b1 100644
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2837.dtsi
@@ -1,6 +1,5 @@
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
-#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2837";
@@ -10,7 +9,7 @@
 			 <0x40000000 0x40000000 0x00001000>;
 		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
 
-		local_intc: local_intc@40000000 {
+		local_intc: interrupt-controller@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;
@@ -115,6 +114,7 @@
 		 */
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
diff --git a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi
index 70bece63f9a7..70bece63f9a7 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi
diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-led-deprecated.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-led-deprecated.dtsi
new file mode 100644
index 000000000000..f83e56de1a72
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-led-deprecated.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	/*
+	 * This file provides the now deprecated ACT LED to the
+	 * Raspberry Pi boards. Please don't include this file
+	 * for new boards!
+	 */
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led_act: led-act {
+			label = "ACT";
+			default-state = "keep";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9512.dtsi
index 882b13807075..882b13807075 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9512.dtsi
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
index 4273b90b53cc..4273b90b53cc 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
index 73f4ece8dcd0..73f4ece8dcd0 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-otg.dtsi
index e2fd9610e125..e2fd9610e125 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-otg.dtsi
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-peripheral.dtsi
index 0ff0e9e25327..0ff0e9e25327 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-peripheral.dtsi
diff --git a/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-wifi-bt.dtsi
index 0b64cc19941f..0b64cc19941f 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-wifi-bt.dtsi
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/broadcom/bcm283x.dtsi
index d2d9c6e67f39..69b0919f1324 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x.dtsi
@@ -135,17 +135,17 @@
 			 * groups only make sense to switch to a
 			 * particular function together.
 			 */
-			dpi_gpio0: dpi_gpio0 {
+			dpi_gpio0: dpi-gpio0 {
 				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
 					     12 13 14 15 16 17 18 19
 					     20 21 22 23 24 25 26 27>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
-			emmc_gpio22: emmc_gpio22 {
+			emmc_gpio22: emmc-gpio22 {
 				brcm,pins = <22 23 24 25 26 27>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
-			emmc_gpio34: emmc_gpio34 {
+			emmc_gpio34: emmc-gpio34 {
 				brcm,pins = <34 35 36 37 38 39>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 				brcm,pull = <BCM2835_PUD_OFF
@@ -155,95 +155,95 @@
 					     BCM2835_PUD_UP
 					     BCM2835_PUD_UP>;
 			};
-			emmc_gpio48: emmc_gpio48 {
+			emmc_gpio48: emmc-gpio48 {
 				brcm,pins = <48 49 50 51 52 53>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
 
-			gpclk0_gpio4: gpclk0_gpio4 {
+			gpclk0_gpio4: gpclk0-gpio4 {
 				brcm,pins = <4>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk1_gpio5: gpclk1_gpio5 {
+			gpclk1_gpio5: gpclk1-gpio5 {
 				brcm,pins = <5>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk1_gpio42: gpclk1_gpio42 {
+			gpclk1_gpio42: gpclk1-gpio42 {
 				brcm,pins = <42>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk1_gpio44: gpclk1_gpio44 {
+			gpclk1_gpio44: gpclk1-gpio44 {
 				brcm,pins = <44>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk2_gpio6: gpclk2_gpio6 {
+			gpclk2_gpio6: gpclk2-gpio6 {
 				brcm,pins = <6>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk2_gpio43: gpclk2_gpio43 {
+			gpclk2_gpio43: gpclk2-gpio43 {
 				brcm,pins = <43>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 				brcm,pull = <BCM2835_PUD_OFF>;
 			};
 
-			i2c0_gpio0: i2c0_gpio0 {
+			i2c0_gpio0: i2c0-gpio0 {
 				brcm,pins = <0 1>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			i2c0_gpio28: i2c0_gpio28 {
+			i2c0_gpio28: i2c0-gpio28 {
 				brcm,pins = <28 29>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			i2c0_gpio44: i2c0_gpio44 {
+			i2c0_gpio44: i2c0-gpio44 {
 				brcm,pins = <44 45>;
 				brcm,function = <BCM2835_FSEL_ALT1>;
 			};
-			i2c1_gpio2: i2c1_gpio2 {
+			i2c1_gpio2: i2c1-gpio2 {
 				brcm,pins = <2 3>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			i2c1_gpio44: i2c1_gpio44 {
+			i2c1_gpio44: i2c1-gpio44 {
 				brcm,pins = <44 45>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
 
-			jtag_gpio22: jtag_gpio22 {
+			jtag_gpio22: jtag-gpio22 {
 				brcm,pins = <22 23 24 25 26 27>;
 				brcm,function = <BCM2835_FSEL_ALT4>;
 			};
 
-			pcm_gpio18: pcm_gpio18 {
+			pcm_gpio18: pcm-gpio18 {
 				brcm,pins = <18 19 20 21>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			pcm_gpio28: pcm_gpio28 {
+			pcm_gpio28: pcm-gpio28 {
 				brcm,pins = <28 29 30 31>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
 
-			sdhost_gpio48: sdhost_gpio48 {
+			sdhost_gpio48: sdhost-gpio48 {
 				brcm,pins = <48 49 50 51 52 53>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
 
-			spi0_gpio7: spi0_gpio7 {
+			spi0_gpio7: spi0-gpio7 {
 				brcm,pins = <7 8 9 10 11>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			spi0_gpio35: spi0_gpio35 {
+			spi0_gpio35: spi0-gpio35 {
 				brcm,pins = <35 36 37 38 39>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			spi1_gpio16: spi1_gpio16 {
+			spi1_gpio16: spi1-gpio16 {
 				brcm,pins = <16 17 18 19 20 21>;
 				brcm,function = <BCM2835_FSEL_ALT4>;
 			};
-			spi2_gpio40: spi2_gpio40 {
+			spi2_gpio40: spi2-gpio40 {
 				brcm,pins = <40 41 42 43 44 45>;
 				brcm,function = <BCM2835_FSEL_ALT4>;
 			};
 
-			uart0_gpio14: uart0_gpio14 {
+			uart0_gpio14: uart0-gpio14 {
 				brcm,pins = <14 15>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
@@ -252,50 +252,50 @@
 			 * people often run uart0 on the two pins
 			 * without flow control.
 			 */
-			uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
+			uart0_ctsrts_gpio16: uart0-ctsrts-gpio16 {
 				brcm,pins = <16 17>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
-			uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 {
+			uart0_ctsrts_gpio30: uart0-ctsrts-gpio30 {
 				brcm,pins = <30 31>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 				brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
 			};
-			uart0_gpio32: uart0_gpio32 {
+			uart0_gpio32: uart0-gpio32 {
 				brcm,pins = <32 33>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 				brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
 			};
-			uart0_gpio36: uart0_gpio36 {
+			uart0_gpio36: uart0-gpio36 {
 				brcm,pins = <36 37>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
-			uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 {
+			uart0_ctsrts_gpio38: uart0-ctsrts-gpio38 {
 				brcm,pins = <38 39>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
 
-			uart1_gpio14: uart1_gpio14 {
+			uart1_gpio14: uart1-gpio14 {
 				brcm,pins = <14 15>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 {
+			uart1_ctsrts_gpio16: uart1-ctsrts-gpio16 {
 				brcm,pins = <16 17>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_gpio32: uart1_gpio32 {
+			uart1_gpio32: uart1-gpio32 {
 				brcm,pins = <32 33>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 {
+			uart1_ctsrts_gpio30: uart1-ctsrts-gpio30 {
 				brcm,pins = <30 31>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_gpio40: uart1_gpio40 {
+			uart1_gpio40: uart1-gpio40 {
 				brcm,pins = <40 41>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
+			uart1_ctsrts_gpio42: uart1-ctsrts-gpio42 {
 				brcm,pins = <42 43>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
@@ -416,7 +416,7 @@
 			clocks = <&clocks BCM2835_CLOCK_PWM>;
 			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
 			assigned-clock-rates = <10000000>;
-			#pwm-cells = <2>;
+			#pwm-cells = <3>;
 			status = "disabled";
 		};
 
@@ -454,6 +454,30 @@
 			status = "disabled";
 		};
 
+		csi0: csi@7e800000 {
+			compatible = "brcm,bcm2835-unicam";
+			reg = <0x7e800000 0x800>,
+			      <0x7e802000 0x4>;
+			reg-names = "unicam", "cmi";
+			interrupts = <2 6>;
+			brcm,num-data-lanes = <2>;
+			status = "disabled";
+			port {
+			};
+		};
+
+		csi1: csi@7e801000 {
+			compatible = "brcm,bcm2835-unicam";
+			reg = <0x7e801000 0x800>,
+			      <0x7e802004 0x4>;
+			reg-names = "unicam", "cmi";
+			interrupts = <2 7>;
+			brcm,num-data-lanes = <4>;
+			status = "disabled";
+			port {
+			};
+		};
+
 		i2c1: i2c@7e804000 {
 			compatible = "brcm,bcm2835-i2c";
 			reg = <0x7e804000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts
index 09ee3e46c0cc..c80ac16ad949 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts
@@ -28,40 +28,39 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		all {
+		led-all {
 			label = "bcm53xx:blue:all";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts
index 32619c6045d3..3fe17bd7b86d 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts
@@ -28,24 +28,24 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts
new file mode 100644
index 000000000000..f5c95c9a712e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Taishi Shimizu <s.taishi14142@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "buffalo,wxr-1750dhp", "brcm,bcm4708";
+	model = "Buffalo WXR-1750DHP";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-aoss {
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		/* GPIO 3 is a switch button with AUTO / MANUAL. */
+		button-manual {
+			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
+			label = "MANUAL";
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+
+		button-restart {
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+		};
+
+		/* GPIO 8 and 9 are a tri-state switch button with
+		 * ROUTER / AP / WB.
+		 */
+		button-router {
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			label = "ROUTER";
+			linux,code = <BTN_1>;
+			linux,input-type = <EV_SW>;
+		};
+
+		button-wb {
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+			label = "WB";
+			linux,code = <BTN_2>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-internet {
+			color = <LED_COLOR_ID_WHITE>;
+			function = "internet";
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power0 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power1 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-router0 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = "router";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-router1 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = "router";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_USB;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&xhci_port1 &ehci_port1 &ohci_port1>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+		};
+
+		port@1 {
+			label = "lan4";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan2";
+		};
+
+		port@4 {
+			label = "lan1";
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
index a658b9b7bcec..9f9084269ef5 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
@@ -16,8 +16,8 @@
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 7 0>;
-		gpio-mosi = <&chipcommon 4 0>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
 		cs-gpios = <&chipcommon 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -37,7 +37,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			/* label = "bcm53xx:blue:usb"; */
 			function = LED_FUNCTION_USB;
 			color = <LED_COLOR_ID_BLUE>;
@@ -48,14 +48,14 @@
 			linux,default-trigger = "usbport";
 		};
 
-		power0 {
+		led-power0 {
 			/* label = "bcm53xx:red:power"; */
 			function = LED_FUNCTION_FAULT;
 			color = <LED_COLOR_ID_RED>;
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		power1 {
+		led-power1 {
 			/* label = "bcm53xx:white:power"; */
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_WHITE>;
@@ -63,7 +63,7 @@
 			linux,default-trigger = "default-on";
 		};
 
-		router0 {
+		led-router0 {
 			/*  label = "bcm53xx:blue:router"; */
 			function = LED_FUNCTION_STATUS;
 			color = <LED_COLOR_ID_BLUE>;
@@ -71,14 +71,14 @@
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			/* label = "bcm53xx:amber:router"; */
 			function = LED_FUNCTION_STATUS;
 			color = <LED_COLOR_ID_AMBER>;
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			/* label = "bcm53xx:blue:wan"; */
 			function = LED_FUNCTION_WAN;
 			color = <LED_COLOR_ID_BLUE>;
@@ -86,14 +86,14 @@
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			/* label = "bcm53xx:blue:wireless"; */
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			/* label = "bcm53xx:amber:wireless"; */
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_AMBER>;
@@ -159,34 +159,35 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			label = "lan1";
 		};
 
 		port@1 {
-			reg = <1>;
 			label = "lan2";
 		};
 
 		port@2 {
-			reg = <2>;
 			label = "lan3";
 		};
 
 		port@3 {
-			reg = <3>;
 			label = "lan4";
 		};
 
 		port@4 {
-			reg = <4>;
 			label = "wan";
 		};
 
 		port@5 {
-			reg = <5>;
 			label = "cpu";
-			ethernet = <&gmac0>;
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp.dts
index 8e506269fa1a..8e506269fa1a 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp.dts
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp2.dts
index 596129027074..596129027074 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp2.dts
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts
index f8f53457dd43..95ef6ca7210b 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts
@@ -28,8 +28,8 @@
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 7 0>;
-		gpio-mosi = <&chipcommon 4 0>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
 		cs-gpios = <&chipcommon 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -49,7 +49,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -58,40 +58,40 @@
 			linux,default-trigger = "usbport";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:white:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:blue:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts
index 0ed25bf71f0d..0ed25bf71f0d 100644
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts
index f1412ba83def..0454423fe166 100644
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts
@@ -19,7 +19,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	gpio-keys {
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
new file mode 100644
index 000000000000..72e960c888ac
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "luxul,xap-1510-v1", "brcm,bcm4708";
+	model = "Luxul XAP-1510 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "poe";
+		};
+
+		port@4 {
+			label = "lan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
index 600ab087f5e5..750e17482371 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
@@ -24,6 +24,14 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
 	nand_controller: nand-controller@18028000 {
 		nand@0 {
 			partitions {
@@ -42,7 +50,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
@@ -60,6 +68,11 @@
 	};
 };
 
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
 &spi_nor {
 	status = "okay";
 };
@@ -69,14 +82,19 @@
 
 	ports {
 		port@4 {
-			reg = <4>;
 			label = "lan";
 		};
 
 		port@5 {
-			reg = <5>;
 			label = "cpu";
-			ethernet = <&gmac0>;
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
index fd6d8d2a4456..2bdbc7d18b0e 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
@@ -13,7 +13,7 @@
 #include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
-	compatible = "netgear,r6250v1", "brcm,bcm4708";
+	compatible = "netgear,r6250-v1", "brcm,bcm4708";
 	model = "Netgear R6250 V1 (BCM4708)";
 
 	chosen {
@@ -29,24 +29,24 @@
 	leds {
 		compatible = "gpio-leds";
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -54,7 +54,7 @@
 			linux,default-trigger = "usbport";
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
@@ -100,34 +100,35 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			label = "lan4";
 		};
 
 		port@1 {
-			reg = <1>;
 			label = "lan3";
 		};
 
 		port@2 {
-			reg = <2>;
 			label = "lan2";
 		};
 
 		port@3 {
-			reg = <3>;
 			label = "lan1";
 		};
 
 		port@4 {
-			reg = <4>;
 			label = "wan";
 		};
 
 		port@5 {
-			reg = <5>;
 			label = "cpu";
-			ethernet = <&gmac0>;
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts
index 76fc1099d47d..77396730bdd3 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts
@@ -12,7 +12,7 @@
 #include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
-	compatible = "netgear,r6300v2", "brcm,bcm4708";
+	compatible = "netgear,r6300-v2", "brcm,bcm4708";
 	model = "Netgear R6300 V2 (BCM4708)";
 
 	chosen {
@@ -28,29 +28,29 @@
 	leds {
 		compatible = "gpio-leds";
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
index 6bcdfb73cb9e..b226bef3369c 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
@@ -28,64 +28,64 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3-white {
+		led-usb3-white {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&xhci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3-green {
+		led-usb3-green {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		status-red {
+		led-status-red {
 			label = "bcm53xx:red:status";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		status-green {
+		led-status-green {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		status-blue {
+		led-status-blue {
 			label = "bcm53xx:blue:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-red {
+		led-wan-red {
 			label = "bcm53xx:red:wan";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 		};
@@ -123,34 +123,35 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			label = "lan4";
 		};
 
 		port@1 {
-			reg = <1>;
 			label = "lan3";
 		};
 
 		port@2 {
-			reg = <2>;
 			label = "lan2";
 		};
 
 		port@3 {
-			reg = <3>;
 			label = "lan1";
 		};
 
 		port@4 {
-			reg = <4>;
 			label = "wan";
 		};
 
 		port@5 {
-			reg = <5>;
 			label = "cpu";
-			ethernet = <&gmac0>;
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/broadcom/bcm4708.dtsi
index 1a19e97a987d..1a19e97a987d 100644
--- a/arch/arm/boot/dts/bcm4708.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm4708.dtsi
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/broadcom/bcm47081-asus-rt-n18u.dts
index ca47cc4f2ba1..3854db0118a9 100644
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-asus-rt-n18u.dts
@@ -28,30 +28,30 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts
index 0edc2543e568..192b8db5a89c 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts
@@ -28,8 +28,8 @@
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 7 0>;
-		gpio-mosi = <&chipcommon 4 0>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
 		cs-gpios = <&chipcommon 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -49,40 +49,40 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:green:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:green:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
@@ -123,34 +123,35 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			label = "lan1";
 		};
 
 		port@1 {
-			reg = <1>;
 			label = "lan2";
 		};
 
 		port@2 {
-			reg = <2>;
 			label = "lan3";
 		};
 
 		port@3 {
-			reg = <3>;
 			label = "lan4";
 		};
 
 		port@4 {
-			reg = <4>;
 			label = "wan";
 		};
 
 		port@5 {
-			reg = <5>;
 			label = "cpu";
-			ethernet = <&gmac0>;
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-900dhp.dts
index 1f0998f34afd..7655e4ff2d1c 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-900dhp.dts
@@ -28,8 +28,8 @@
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 7 0>;
-		gpio-mosi = <&chipcommon 4 0>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
 		cs-gpios = <&chipcommon 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -49,45 +49,45 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:green:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:green:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
new file mode 100644
index 000000000000..0198b5f9e4a7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+	compatible = "luxul,xap-1410-v1", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Luxul XAP-1410 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@4 {
+			label = "poe";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
index 3b35a7af4b1c..73ff1694a4a0 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
@@ -9,7 +9,7 @@
 #include "bcm5301x-nand-cs0-bch4.dtsi"
 
 / {
-	compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
+	compatible = "luxul,xwr-1200-v1", "brcm,bcm47081", "brcm,bcm4708";
 	model = "Luxul XWR-1200 V1";
 
 	chosen {
@@ -24,67 +24,71 @@
 	nvram@1eff0000 {
 		compatible = "brcm,nvram";
 		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		lan3 {
+		led-lan3 {
 			label = "bcm53xx:green:lan3";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		lan4 {
+		led-lan4 {
 			label = "bcm53xx:green:lan4";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		lan2 {
+		led-lan2 {
 			label = "bcm53xx:green:lan2";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		lan1 {
+		led-lan1 {
 			label = "bcm53xx:green:lan1";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
@@ -106,6 +110,11 @@
 	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 };
 
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
 &spi_nor {
 	status = "okay";
 };
@@ -115,34 +124,37 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			label = "lan4";
 		};
 
 		port@1 {
-			reg = <1>;
 			label = "lan3";
 		};
 
 		port@2 {
-			reg = <2>;
 			label = "lan2";
 		};
 
 		port@3 {
-			reg = <3>;
 			label = "lan1";
 		};
 
 		port@4 {
-			reg = <4>;
 			label = "wan";
+			nvmem-cells = <&et0macaddr 5>;
+			nvmem-cell-names = "mac-address";
 		};
 
 		port@5 {
-			reg = <5>;
 			label = "cpu";
-			ethernet = <&gmac0>;
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts
index 19a7971b5a00..b6a5886698b2 100644
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts
@@ -23,50 +23,50 @@
 	leds {
 		compatible = "gpio-leds";
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:green:lan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb2-port1 {
+		led-usb2-port1 {
 			label = "bcm53xx:green:usb2-port1";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan-green {
+		led-wan-green {
 			label = "bcm53xx:green:wan";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:green:wps";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb2-port2 {
+		led-usb2-port2 {
 			label = "bcm53xx:green:usb2-port2";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
@@ -95,30 +95,15 @@
 	status = "okay";
 
 	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		boot@0 {
-			label = "boot";
-			reg = <0x000000 0x040000>;
-			read-only;
-		};
+		compatible = "tplink,safeloader-partitions";
+		partitions-table-offset = <0xe50000>;
 
-		os-image@100000 {
-			label = "os-image";
-			reg = <0x040000 0x200000>;
+		partition-os-image {
 			compatible = "brcm,trx";
 		};
 
-		rootfs@240000 {
-			label = "rootfs";
-			reg = <0x240000 0xc00000>;
-		};
-
-		nvram@ff0000 {
-			label = "nvram";
-			reg = <0xff0000 0x010000>;
+		partition-file-system {
+			linux,rootfs;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/broadcom/bcm47081.dtsi
index ed13af028528..ed13af028528 100644
--- a/arch/arm/boot/dts/bcm47081.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm47081.dtsi
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
new file mode 100644
index 000000000000..3da2daee0c84
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Tom Brautaset <tbrautaset@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "asus,rt-ac3200", "brcm,bcm4709", "brcm,bcm4708";
+	model = "ASUS RT-AC3200";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_WPS;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et0macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et0macaddr 2>;
+	nvmem-cell-names = "mac-address";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
+		};
+
+		partition@80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
+		};
+
+		partition@200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+		};
+
+		port@1 {
+			label = "lan4";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan2";
+		};
+
+		port@4 {
+			label = "lan1";
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts
index f52a75c4ca09..59400217f8c3 100644
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts
@@ -25,21 +25,27 @@
 		      <0x88000000 0x08000000>;
 	};
 
+	nvram@1c080000 {
+		et1macaddr: et1macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:red:wan";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
@@ -62,6 +68,11 @@
 	};
 };
 
+&gmac0 {
+	nvmem-cells = <&et1macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
 &usb3_phy {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts
index 5ff6c588e16e..b7cd2faa30ce 100644
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts
@@ -28,48 +28,48 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router-amber {
+		led-router-amber {
 			label = "bcm53xx:amber:router";
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		router-white {
+		led-router-white {
 			label = "bcm53xx:white:router";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless-amber {
+		led-wireless-amber {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless-white {
+		led-wireless-white {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
new file mode 100644
index 000000000000..2ba5adf2b7e7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Linksys EA9200";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x180000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts
index de961fbb6200..24ba8f8f9bf3 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts
@@ -28,43 +28,43 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:white:5ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
index 087f7f60de18..127ca8741220 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
@@ -39,59 +39,59 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz-1 {
+		led-5ghz-1 {
 			label = "bcm53xx:white:5ghz-1";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz-2 {
+		led-5ghz-2 {
 			label = "bcm53xx:white:5ghz-2";
 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
@@ -137,8 +137,10 @@
 		#size-cells = <2>;
 
 		wifi@0,1,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
 			reg = <0x0000 0 0 0 0>;
 			ieee80211-freq-limit = <5735000 5835000>;
+			brcm,ccode-map = "JP-JP-78", "US-Q2-86";
 		};
 	};
 };
@@ -159,6 +161,19 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
+			bridge@1,0 {
+				reg = <0x800 0 0 0 0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				wifi@0,0 {
+					compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+					reg = <0x0000 0 0 0 0>;
+					brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+				};
+			};
+
 			bridge@1,2,2 {
 				reg = <0x1000 0 0 0 0>;
 
@@ -166,8 +181,10 @@
 				#size-cells = <2>;
 
 				wifi@1,4,0 {
+					compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
 					reg = <0x0000 0 0 0 0>;
 					ieee80211-freq-limit = <5170000 5730000>;
+					brcm,ccode-map = "JP-JP-78", "US-Q2-86";
 				};
 			};
 		};
@@ -191,39 +208,45 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			label = "lan1";
 		};
 
 		port@1 {
-			reg = <1>;
 			label = "lan2";
 		};
 
 		port@2 {
-			reg = <2>;
 			label = "lan3";
 		};
 
 		port@3 {
-			reg = <3>;
 			label = "lan4";
 		};
 
 		port@4 {
-			reg = <4>;
 			label = "wan";
 		};
 
-		port@8 {
-			reg = <8>;
-			label = "cpu";
-			ethernet = <&gmac2>;
+		port@5 {
+			status = "disabled";
 
 			fixed-link {
 				speed = <1000>;
 				full-duplex;
 			};
 		};
+
+		port@7 {
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@8 {
+			label = "cpu";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts
index 11d1068160da..5a8b2b1567e6 100644
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts
@@ -23,27 +23,27 @@
 	leds {
 		compatible = "gpio-leds";
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -51,24 +51,24 @@
 			linux,default-trigger = "usbport";
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		wan-blue {
+		led-wan-blue {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
@@ -104,30 +104,15 @@
 	status = "okay";
 
 	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		boot@0 {
-			label = "boot";
-			reg = <0x000000 0x040000>;
-			read-only;
-		};
+		compatible = "tplink,safeloader-partitions";
+		partitions-table-offset = <0xe50000>;
 
-		os-image@100000 {
-			label = "os-image";
-			reg = <0x040000 0x200000>;
+		partition-os-image {
 			compatible = "brcm,trx";
 		};
 
-		rootfs@240000 {
-			label = "rootfs";
-			reg = <0x240000 0xc00000>;
-		};
-
-		nvram@ff0000 {
-			label = "nvram";
-			reg = <0xff0000 0x010000>;
+		partition-file-system {
+			linux,rootfs;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/broadcom/bcm4709.dtsi
index cba3d910bed8..cba3d910bed8 100644
--- a/arch/arm/boot/dts/bcm4709.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm4709.dtsi
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dts
new file mode 100644
index 000000000000..1655ac95769c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Arınç ÜNAL <arinc.unal@arinc9.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094-asus-rt-ac3100.dtsi"
+
+/ {
+	compatible = "asus,rt-ac3100", "brcm,bcm47094", "brcm,bcm4708";
+	model = "ASUS RT-AC3100";
+
+	nvram@1c080000 {
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et0macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et0macaddr 2>;
+	nvmem-cell-names = "mac-address";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
new file mode 100644
index 000000000000..2cfaaabc7a6a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Arınç ÜNAL <arinc.unal@arinc9.com>
+ */
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+		device_type = "memory";
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-led {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-lan {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-usb2 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ehci_port1>, <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wan-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_WPS;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
+		};
+
+		partition@80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
+		};
+
+		partition@200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			label = "cpu";
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
new file mode 100644
index 000000000000..01ec8c03686a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Tom Brautaset <tbrautaset@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "asus,rt-ac5300", "brcm,bcm47094", "brcm,bcm4708";
+	model = "ASUS RT-AC5300";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+		device_type = "memory";
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;
+
+		et1macaddr: et1macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-lan {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_WPS;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et1macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et1macaddr 2>;
+	nvmem-cell-names = "mac-address";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
+		};
+
+		partition@80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
+		};
+
+		partition@200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+		};
+
+		port@1 {
+			label = "lan1";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan3";
+		};
+
+		port@4 {
+			label = "lan4";
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
new file mode 100644
index 000000000000..a197f447fd97
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Arınç ÜNAL <arinc.unal@arinc9.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094-asus-rt-ac3100.dtsi"
+
+/ {
+	compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708";
+	model = "ASUS RT-AC88U";
+
+	nvram@1c080000 {
+		et1macaddr: et1macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	switch {
+		compatible = "realtek,rtl8365mb";
+		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		realtek,disable-leds;
+		dsa,member = <1 0>;
+
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+				phy-handle = <&ethphy0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan6";
+				phy-handle = <&ethphy1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan7";
+				phy-handle = <&ethphy2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan8";
+				phy-handle = <&ethphy3>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&sw0_p5>;
+				phy-mode = "rgmii";
+				tx-internal-delay-ps = <2000>;
+				rx-internal-delay-ps = <2100>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+	};
+};
+
+&gmac0 {
+	status = "disabled";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et1macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&srab {
+	dsa,member = <0 0>;
+
+	ports {
+		sw0_p5: port@5 {
+			/delete-property/ethernet;
+
+			label = "extsw";
+			phy-mode = "rgmii";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
index 2c38b642a8b8..c5099defe9f9 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
@@ -25,6 +25,15 @@
 		      <0x88000000 0x08000000>;
 	};
 
+	nvram@1e3f0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e3f0000 0x10000>;
+
+		et2macaddr: et2macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
 	nand_controller: nand-controller@18028000 {
 		nand@0 {
 			partitions {
@@ -33,6 +42,7 @@
 				#size-cells = <1>;
 
 				partition@0 {
+					compatible = "seama";
 					label = "firmware";
 					reg = <0x00000000 0x08000000>;
 				};
@@ -43,28 +53,28 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3-white {
+		led-usb3-white {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -72,12 +82,12 @@
 			linux,default-trigger = "usbport";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:white:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
@@ -111,6 +121,11 @@
 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 };
 
+&gmac0 {
+	nvmem-cells = <&et2macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
 &spi_nor {
 	status = "okay";
 };
@@ -124,39 +139,37 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			label = "lan4";
 		};
 
 		port@1 {
-			reg = <1>;
 			label = "lan3";
 		};
 
 		port@2 {
-			reg = <2>;
 			label = "lan2";
 		};
 
 		port@3 {
-			reg = <3>;
 			label = "lan1";
 		};
 
 		port@4 {
-			reg = <4>;
 			label = "wan";
+			nvmem-cells = <&et2macaddr 3>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
 		};
 
 		port@8 {
-			reg = <8>;
 			label = "cpu";
-			ethernet = <&gmac2>;
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
new file mode 100644
index 000000000000..3124dfd01b94
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device tree for D-Link DIR-890L
+ * D-Link calls this board "WRGAC36"
+ * this router has the same looks and form factor as D-Link DIR-885L.
+ *
+ * Some differences from DIR-885L include a separate USB2 port, separate LEDs
+ * for USB2 and USB3, a separate VCC supply for the USB2 slot and no
+ * router/extender switch is mounted (there is an empty mount point on the
+ * PCB) so this device is a pure router. Also the LAN ports are in the right
+ * order.
+ *
+ * Based on the device tree for DIR-885L
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ * Copyright (C) 2022 Linus Walleij
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
+
+/ {
+	compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708";
+	model = "D-Link DIR-890L";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		/*
+		 * LED information is derived from the boot log which
+		 * conveniently lists all the LEDs.
+		 */
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb2-white {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Called "factory reset" in the vendor dmesg */
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * The flash memory is memory mapped at 0x1e000000-0x1fffffff
+	 * 64KB blocks; total size 2MB, same that can be
+	 * found attached to the spi_nor SPI controller.
+	 */
+	nvram@1e1f0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e1f0000 0x00010000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+};
+
+&gmac2 {
+	/*
+	 * The NVRAM curiously does not contain a MAC address
+	 * for et2 so since that is the only ethernet interface
+	 * actually in use on the platform, we use this et0 MAC
+	 * address for et2.
+	 */
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&nandcs {
+	/* Spansion S34ML01G2, 128MB with 128KB erase blocks */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * This is called "nflash" in the vendor kernel with
+		 * "upgrade" and "rootfs" (probably using OpenWrt
+		 * splitpart). We call it "firmware" like standard tools
+		 * assume. The CFE loader contains incorrect information
+		 * about TRX partitions, ignore this, there are no TRX
+		 * partitions: this device uses SEAMA.
+		 */
+		firmware@0 {
+			compatible = "seama";
+			label = "firmware";
+			reg = <0x00000000 0x08000000>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			label = "cpu";
+			phy-mode = "rgmii";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts
index 86c7cc0fa70e..2b5c80d835e9 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts
@@ -52,19 +52,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:green:usb2";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -72,58 +72,58 @@
 			linux,default-trigger = "usbport";
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wifi-disabled {
+		led-wifi-disabled {
 			label = "bcm53xx:amber:wifi-disabled";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		wifi-enabled {
+		led-wifi-enabled {
 			label = "bcm53xx:white:wifi-enabled";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar1 {
+		led-bluebar1 {
 			label = "bcm53xx:white:bluebar1";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar2 {
+		led-bluebar2 {
 			label = "bcm53xx:white:bluebar2";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar3 {
+		led-bluebar3 {
 			label = "bcm53xx:white:bluebar3";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 		};
 
-		bluebar4 {
+		led-bluebar4 {
 			label = "bcm53xx:white:bluebar4";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar5 {
+		led-bluebar5 {
 			label = "bcm53xx:white:bluebar5";
 			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar6 {
+		led-bluebar6 {
 			label = "bcm53xx:white:bluebar6";
 			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar7 {
+		led-bluebar7 {
 			label = "bcm53xx:white:bluebar7";
 			gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar8 {
+		led-bluebar8 {
 			label = "bcm53xx:white:bluebar8";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
@@ -207,29 +207,32 @@
 	dsa,member = <0 0>;
 
 	ports {
+		sw0_p0: port@0 {
+			label = "extsw";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
 		port@1 {
-			reg = <1>;
 			label = "lan7";
 		};
 
 		port@2 {
-			reg = <2>;
 			label = "lan4";
 		};
 
 		port@3 {
-			reg = <3>;
 			label = "lan8";
 		};
 
 		port@4 {
-			reg = <4>;
 			label = "wan";
 		};
 
 		port@5 {
-			reg = <5>;
-			ethernet = <&gmac0>;
 			label = "cpu";
 			status = "disabled";
 
@@ -240,8 +243,6 @@
 		};
 
 		port@7 {
-			reg = <7>;
-			ethernet = <&gmac1>;
 			label = "cpu";
 			status = "disabled";
 
@@ -252,24 +253,7 @@
 		};
 
 		port@8 {
-			reg = <8>;
-			ethernet = <&gmac2>;
 			label = "cpu";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		sw0_p0: port@0 {
-			reg = <0>;
-			label = "extsw";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
 		};
 	};
 };
@@ -295,7 +279,7 @@
 			reg = <0x080000 0x0100000>;
 		};
 
-		partition@180000{
+		partition@180000 {
 			label = "devinfo";
 			reg = <0x0180000 0x080000>;
 		};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
index 9ad15bcae1ca..e374062eb5b7 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
@@ -25,18 +25,22 @@
 	nvram@1eff0000 {
 		compatible = "brcm,nvram";
 		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -61,6 +65,11 @@
 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 };
 
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
 &spi_nor {
 	status = "okay";
 };
@@ -74,34 +83,37 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			label = "wan";
+			nvmem-cells = <&et0macaddr 1>;
+			nvmem-cell-names = "mac-address";
 		};
 
 		port@1 {
-			reg = <1>;
 			label = "lan4";
 		};
 
 		port@2 {
-			reg = <2>;
 			label = "lan3";
 		};
 
 		port@3 {
-			reg = <3>;
 			label = "lan2";
 		};
 
 		port@4 {
-			reg = <4>;
 			label = "lan1";
 		};
 
 		port@5 {
-			reg = <5>;
 			label = "cpu";
-			ethernet = <&gmac0>;
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
new file mode 100644
index 000000000000..badafa024d24
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+
+/ {
+	compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XAP-1610 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+
+&pcie0 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825";
+		};
+	};
+};
+
+&pcie1 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825";
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "poe";
+		};
+
+		port@1 {
+			label = "lan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
index 6549d07b9887..cf95af9db1e6 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
@@ -25,18 +25,22 @@
 	nvram@1eff0000 {
 		compatible = "brcm,nvram";
 		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -61,6 +65,11 @@
 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 };
 
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
 &spi_nor {
 	status = "okay";
 };
@@ -74,34 +83,37 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			label = "wan";
+			nvmem-cells = <&et0macaddr 1>;
+			nvmem-cell-names = "mac-address";
 		};
 
 		port@1 {
-			reg = <1>;
 			label = "lan4";
 		};
 
 		port@2 {
-			reg = <2>;
 			label = "lan3";
 		};
 
 		port@3 {
-			reg = <3>;
 			label = "lan2";
 		};
 
 		port@4 {
-			reg = <4>;
 			label = "lan1";
 		};
 
 		port@5 {
-			reg = <5>;
 			label = "cpu";
-			ethernet = <&gmac0>;
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
index 654fcce9fded..992c19e1cfa1 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
@@ -22,10 +22,18 @@
 		      <0x88000000 0x18000000>;
 	};
 
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
-		status	{
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
@@ -47,6 +55,11 @@
 	status = "okay";
 };
 
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
 &spi_nor {
 	status = "okay";
 };
@@ -56,14 +69,19 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			label = "lan";
 		};
 
 		port@5 {
-			reg = <5>;
 			label = "cpu";
-			ethernet = <&gmac0>;
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
index bf053a2fcc7c..4d0ba315a204 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
@@ -9,7 +9,7 @@
 #include "bcm5301x-nand-cs0-bch4.dtsi"
 
 / {
-	compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
+	compatible = "luxul,xwr-3100-v1", "brcm,bcm47094", "brcm,bcm4708";
 	model = "Luxul XWR-3100 V1";
 
 	chosen {
@@ -25,43 +25,47 @@
 	nvram@1eff0000 {
 		compatible = "brcm,nvram";
 		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power	{
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		lan3	{
+		led-lan3 {
 			label = "bcm53xx:green:lan3";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		lan4	{
+		led-lan4 {
 			label = "bcm53xx:green:lan4";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		wan	{
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		lan1	{
+		led-lan1 {
 			label = "bcm53xx:green:lan1";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		lan2	{
+		led-lan2 {
 			label = "bcm53xx:green:lan2";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3	{
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -69,18 +73,18 @@
 			linux,default-trigger = "usbport";
 		};
 
-		status	{
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
@@ -101,6 +105,11 @@
 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 };
 
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
 &spi_nor {
 	status = "okay";
 };
@@ -114,34 +123,37 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			label = "lan4";
 		};
 
 		port@1 {
-			reg = <1>;
 			label = "lan3";
 		};
 
 		port@2 {
-			reg = <2>;
 			label = "lan2";
 		};
 
 		port@3 {
-			reg = <3>;
 			label = "lan1";
 		};
 
 		port@4 {
-			reg = <4>;
 			label = "wan";
+			nvmem-cells = <&et0macaddr 5>;
+			nvmem-cell-names = "mac-address";
 		};
 
 		port@5 {
-			reg = <5>;
 			label = "cpu";
-			ethernet = <&gmac0>;
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
new file mode 100644
index 000000000000..83c429afc297
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWR-3150 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&pcie0 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930";
+		};
+	};
+};
+
+&pcie1 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930";
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 5>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/broadcom/bcm47094-netgear-r8500.dts
index f850dce37b20..76d562610654 100644
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-netgear-r8500.dts
@@ -25,38 +25,38 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-1 {
+		led-5ghz-1 {
 			label = "bcm53xx:white:5ghz-1";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-2 {
+		led-5ghz-2 {
 			label = "bcm53xx:white:5ghz-2";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts
index 3bf6e24978ac..bb1bc4e61bc2 100644
--- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts
@@ -55,7 +55,7 @@
 			reg = <0x0080000 0x0100000>;
 		};
 
-		partition@180000{
+		partition@180000 {
 			label = "phicomm";
 			reg = <0x0180000 0x0280000>;
 			read-only;
diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/broadcom/bcm47094.dtsi
index 6282363313e1..6282363313e1 100644
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm47094.dtsi
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
index e20b6d2eb274..ac44c745bdf8 100644
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
@@ -23,13 +23,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wlan {
+		led-wlan {
 			label = "bcm53xx:blue:wlan";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
-		system {
+		led-system {
 			label = "bcm53xx:green:system";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
@@ -46,3 +45,22 @@
 		};
 	};
 };
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	/delete-node/ fixed-link;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gmac1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
index 9d863570fcf3..fd071da26cfa 100644
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
@@ -20,29 +20,27 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
-	leds {
+	leds-0 {
 		compatible = "gpio-leds";
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		system {
+		led-system {
 			label = "bcm53xx:green:system";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 		};
 	};
 
-	pcie0_leds {
+	leds-1 {
 		compatible = "gpio-leds";
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 	};
 
@@ -83,3 +81,22 @@
 		};
 	};
 };
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	/delete-node/ fixed-link;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gmac1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts
index 55b92645b0f1..3ac6cac541ca 100644
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts
@@ -20,37 +20,37 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
-	leds {
+	leds-0 {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		system {
+		led-system {
 			label = "bcm53xx:blue:system";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 		};
 	};
 
-	pcie0_leds {
+	leds-1 {
 		compatible = "gpio-leds";
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
 		};
@@ -111,34 +111,27 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			label = "wan";
 		};
 
 		port@1 {
-			reg = <1>;
 			label = "lan1";
 		};
 
 		port@2 {
-			reg = <2>;
 			label = "lan2";
 		};
 
 		port@3 {
-			reg = <3>;
 			label = "lan3";
 		};
 
 		port@4 {
-			reg = <4>;
 			label = "lan4";
 		};
 
-		port@5 {
-			reg = <5>;
+		port@8 {
 			label = "cpu";
-			ethernet = <&gmac0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/broadcom/bcm47622.dtsi
index 2df04528af82..485863f9c420 100644
--- a/arch/arm/boot/dts/bcm47622.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm47622.dtsi
@@ -51,6 +51,8 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -87,6 +89,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -118,6 +126,32 @@
 		#size-cells = <1>;
 		ranges = <0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
index 14f58033efeb..08abfdc63d18 100644
--- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
+++ b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
@@ -39,8 +39,6 @@
 
 	keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		key-restart {
 			label = "Reset";
@@ -61,6 +59,9 @@
 
 &gmac0 {
 	status = "okay";
+
+	nvmem-cells = <&macaddr_board_config_66>;
+	nvmem-cell-names = "mac-address";
 };
 
 &gmac1 {
@@ -74,8 +75,6 @@
 };
 
 &nandcs {
-	nand-ecc-algo = "hw";
-
 	partitions {
 		compatible = "fixed-partitions";
 		#address-cells = <0x1>;
@@ -106,8 +105,25 @@
 		};
 
 		partition@800000 {
+			compatible = "linux,ubi";
 			label = "ubi";
 			reg = <0x800000 0x7780000>;
+
+			volumes {
+				ubi-volume-board-config {
+					volname = "board-config";
+
+					nvmem-layout {
+						compatible = "fixed-layout";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						macaddr_board_config_66: macaddr@66 {
+							reg = <0x66 0x6>;
+						};
+					};
+				};
+			};
 		};
 	};
 };
@@ -117,20 +133,25 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			label = "poe";
 		};
 
 		port@5 {
-			reg = <5>;
 			label = "cpu";
-			ethernet = <&gmac0>;
 
 			fixed-link {
 				speed = <1000>;
-				duplex-full;
+				full-duplex;
 			};
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts b/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts
new file mode 100644
index 000000000000..c1f54391746f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DWL-8610AP";
+	compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708";
+
+	memory@0 {
+		device_type = "memory";
+		/* 512 MB RAM in 2 x Macronix D9PSH chips */
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-diag {
+			/* Actually "diag" unclear what this means */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-wlan-2g {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wlan-5g {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			/* This GPIO is actually stored in NVRAM, but it's not gonna change */
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * Flash memory at 0x1e000000-0x1fffffff
+	 * Macronix 32 64KB blocks; total size 2MB, same that can be
+	 * found attached to the spi_nor SPI controller.
+	 */
+	nvram@1e080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e080000 0x00020000>;
+
+		et0macaddr: et0macaddr {
+		};
+
+		et1macaddr: et1macaddr {
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	/* Serial SPI NOR Flash MX 25L1606E */
+	status = "okay";
+};
+
+&nandcs {
+	/*
+	 * Spansion S34ML01G100TFI00 128 MB NAND Flash memory
+	 *
+	 * This ECC is a bit unorthodox but it is what the stock firmware
+	 * is using, so to be able to mount the original partitions
+	 * this is necessary.
+	 */
+	nand-ecc-strength = <5>;
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* This is named nflash1.trx in CFE */
+		trx@0 {
+			label = "firmware";
+			reg = <0x00000000 0x02800000>;
+			compatible = "brcm,trx";
+		};
+
+		/* This is named nflash1.trx2 in CFE */
+		trx2@2800000 {
+			label = "firmware2";
+			reg = <0x02800000 0x02800000>;
+			compatible = "brcm,trx";
+		};
+
+		/* This is named nflash1.rwfs in CFE */
+		free@5000000 {
+			label = "free";
+			reg = <0x05000000 0x03000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
index e678bc03d816..45bd27906f29 100644
--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
@@ -58,7 +58,7 @@
 	pwm-leds {
 		compatible = "pwm-leds";
 
-		red {
+		led-0 {
 			/* SYS-LED 1 - Tricolor */
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_RED>;
@@ -66,7 +66,7 @@
 			max-brightness = <255>;
 		};
 
-		green {
+		led-1 {
 			/* SYS-LED 1 - Tricolor */
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_GREEN>;
@@ -74,7 +74,7 @@
 			max-brightness = <255>;
 		};
 
-		blue {
+		led-2 {
 			/* SYS-LED 1 - Tricolor */
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_BLUE>;
@@ -125,8 +125,6 @@
 };
 
 &nandcs {
-	nand-ecc-algo = "hw";
-
 	partitions {
 		/*
 		 * The partition autodetection does not work for this device.
@@ -140,31 +138,31 @@
 		#address-cells = <0x1>;
 		#size-cells = <0x1>;
 
-		partition0@0 {
+		partition@0 {
 			label = "u-boot";
 			reg = <0x0 0x100000>;
 			read-only;
 		};
 
-		partition1@100000 {
+		partition@100000 {
 			label = "bootkernel1";
 			reg = <0x100000 0x300000>;
 			read-only;
 		};
 
-		partition2@400000 {
+		partition@400000 {
 			label = "nvram";
 			reg = <0x400000 0x100000>;
 			read-only;
 		};
 
-		partition3@500000 {
+		partition@500000 {
 			label = "bootkernel2";
 			reg = <0x500000 0x300000>;
 			read-only;
 		};
 
-		partition4@800000 {
+		partition@800000 {
 			label = "ubi";
 			reg = <0x800000 0x7780000>;
 		};
@@ -176,20 +174,25 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			label = "poe";
 		};
 
 		port@5 {
-			reg = <5>;
 			label = "cpu";
-			ethernet = <&gmac0>;
 
 			fixed-link {
 				speed = <1000>;
-				duplex-full;
+				full-duplex;
 			};
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
 
@@ -212,11 +215,15 @@
 		reg = <0x50>;
 		pagesize = <32>;
 		read-only;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
-		mac_address: mac-address@66 {
-			reg = <0x66 0x6>;
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mac_address: mac-address@66 {
+				reg = <0x66 0x6>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch1.dtsi
index c349e8f0afc5..c349e8f0afc5 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch1.dtsi
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch4.dtsi
index 18e25e302b13..18e25e302b13 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch4.dtsi
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch8.dtsi
index c8e56d30bd6f..c8e56d30bd6f 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch8.dtsi
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0.dtsi
index be9a00ff752d..be9a00ff752d 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0.dtsi
diff --git a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
new file mode 100644
index 000000000000..f06a178a9240
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
@@ -0,0 +1,136 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
+ * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcm-ns.dtsi"
+
+/ {
+	mpcore-bus@19000000 {
+		a9pll: arm_clk@0 {
+			#clock-cells = <0>;
+			compatible = "brcm,nsp-armpll";
+			clocks = <&osc>;
+			reg = <0x00000 0x1000>;
+		};
+
+		watchdog@20620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x20620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		iprocmed: iprocmed {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		iprocslow: iprocslow {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+	};
+
+	i2c0: i2c@18009000 {
+		compatible = "brcm,iproc-i2c";
+		reg = <0x18009000 0x50>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	dmu-bus@1800c000 {
+		cru-bus@100 {
+			lcpll0: clock-controller@100 {
+				#clock-cells = <1>;
+				compatible = "brcm,nsp-lcpll0";
+				reg = <0x100 0x14>;
+				clocks = <&osc>;
+				clock-output-names = "lcpll0", "pcie_phy",
+						     "sdio", "ddr_phy";
+			};
+
+			genpll: clock-controller@140 {
+				#clock-cells = <1>;
+				compatible = "brcm,nsp-genpll";
+				reg = <0x140 0x24>;
+				clocks = <&osc>;
+				clock-output-names = "genpll", "phy",
+						     "ethernetclk",
+						     "usbclk", "iprocfast",
+						     "sata1", "sata2";
+			};
+		};
+	};
+
+	spi@18029200 {
+		compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+		reg = <0x18029200 0x184>,
+		      <0x18029000 0x124>,
+		      <0x1811b408 0x004>,
+		      <0x180293a0 0x01c>;
+		reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mspi_done",
+				  "mspi_halted",
+				  "spi_lr_fullness_reached",
+				  "spi_lr_session_aborted",
+				  "spi_lr_impatient",
+				  "spi_lr_session_done",
+				  "spi_lr_overread";
+		clocks = <&iprocmed>;
+		num-cs = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		spi_nor: flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+			status = "disabled";
+
+			partitions {
+				compatible = "brcm,bcm947xx-cfe-partitions";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts
index 975f854f652f..08cf1220b655 100644
--- a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
+++ b/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts
@@ -32,7 +32,6 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 
 	flash: flash@0 {
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/broadcom/bcm53573.dtsi
index 3f03a381db0f..2df80740d181 100644
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm53573.dtsi
@@ -127,6 +127,9 @@
 
 		pcie0: pcie@2000 {
 			reg = <0x00002000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
 		};
 
 		usb2: usb2@4000 {
@@ -156,8 +159,6 @@
 			};
 
 			ohci: usb@d000 {
-				#usb-cells = <0>;
-
 				compatible = "generic-ohci";
 				reg = <0xd000 0x1000>;
 				interrupt-parent = <&gic>;
@@ -180,6 +181,12 @@
 
 		gmac0: ethernet@5000 {
 			reg = <0x5000 0x1000>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
 
 			mdio {
 				#address-cells = <1>;
@@ -191,10 +198,44 @@
 
 					status = "disabled";
 
-					/* ports are defined in board DTS */
 					ports {
 						#address-cells = <1>;
 						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+						};
+
+						port@1 {
+							reg = <1>;
+						};
+
+						port@2 {
+							reg = <2>;
+						};
+
+						port@3 {
+							reg = <3>;
+						};
+
+						port@4 {
+							reg = <4>;
+						};
+
+						port@5 {
+							reg = <5>;
+							ethernet = <&gmac1>;
+
+							fixed-link {
+								speed = <1000>;
+								full-duplex;
+							};
+						};
+
+						port@8 {
+							reg = <8>;
+							ethernet = <&gmac0>;
+						};
 					};
 				};
 			};
@@ -202,6 +243,12 @@
 
 		gmac1: ethernet@b000 {
 			reg = <0xb000 0x1000>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
 		};
 
 		pmu@12000 {
diff --git a/arch/arm/boot/dts/broadcom/bcm63138.dtsi b/arch/arm/boot/dts/broadcom/bcm63138.dtsi
new file mode 100644
index 000000000000..4ec568586b14
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm63138.dtsi
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Broadcom BCM63138 DSL SoCs Device Tree
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm63138", "brcm,bcmbca";
+	model = "Broadcom BCM963138 Reference Board";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		uart0 = &serial0;
+		uart1 = &serial1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0>;
+			enable-method = "brcm,bcm63138";
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <1>;
+			enable-method = "brcm,bcm63138";
+			resets = <&pmb0 4 1>;
+		};
+	};
+
+	clocks {
+		/* UBUS peripheral clock */
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+
+		/* peripheral clock for system timer */
+		axi_clk: axi_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&armpll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/* APB bus clock */
+		apb_clk: apb_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&armpll>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	/* ARM bus */
+	axi@80000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x80000000 0x784000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		L2: cache-controller@1d000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x1d000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			cache-size = <524288>;
+			cache-sets = <1024>;
+			cache-line-size = <32>;
+			interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		scu: scu@1e000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x1e000 0x100>;
+		};
+
+		gic: interrupt-controller@1f000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x1f000 0x1000
+				0x1e100 0x100>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+		};
+
+		global_timer: timer@1e200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x1e200 0x20>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&axi_clk>;
+		};
+
+		local_timer: local-timer@1e600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x1e600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&axi_clk>;
+		};
+
+		twd_watchdog: watchdog@1e620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x1e620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		armpll: armpll@20000 {
+			#clock-cells = <0>;
+			compatible = "brcm,bcm63138-armpll";
+			clocks = <&periph_clk>;
+			reg = <0x20000 0xf00>;
+		};
+
+		pmb0: reset-controller@4800c0 {
+			compatible = "brcm,bcm63138-pmb";
+			reg = <0x4800c0 0x10>;
+			#reset-cells = <2>;
+		};
+
+		pmb1: reset-controller@4800e0 {
+			compatible = "brcm,bcm63138-pmb";
+			reg = <0x4800e0 0x10>;
+			#reset-cells = <2>;
+		};
+
+		ahci: sata@a000 {
+			compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0xa000 0x9ac>, <0x8040 0x24>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&pmb0 3 1>;
+			reset-names = "ahci";
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+		};
+
+		sata_phy: sata-phy@8100 {
+			compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3";
+			reg = <0x8100 0x1e00>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+		};
+	};
+
+	/* Legacy UBUS base */
+	ubus@fffe8000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffe8000 0x10000>;
+
+		timer: timer@80 {
+			compatible = "brcm,bcm6328-timer", "syscon";
+			reg = <0x80 0x3c>;
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@100 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x100 0x04>, <0x114 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@104 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x104 0x04>, <0x118 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@108 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x108 0x04>, <0x11c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@10c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x10c 0x04>, <0x120 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@110 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x110 0x04>, <0x124 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@300 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x300 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serial0: serial@600 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x600 0x1b>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "disabled";
+		};
+
+		serial1: serial@620 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x620 0x1b>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "disabled";
+		};
+
+		leds: led-controller@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x700 0xdc>;
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
+			reg = <0x2000 0x600>, <0xf0 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "nand_ctlrdy";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		serial@4400 {
+			compatible = "brcm,bcm63138-hs-uart", "brcm,bcmbca-hs-uart";
+			reg = <0x4400 0x1e0>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		bootlut: bootlut@8000 {
+			compatible = "brcm,bcm63138-bootlut";
+			reg = <0x8000 0x50>;
+		};
+
+		pl081_dma: dma-controller@d000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0xd000 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&timer>;
+			offset = <0x34>;
+			mask = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm63148.dtsi b/arch/arm/boot/dts/broadcom/bcm63148.dtsi
new file mode 100644
index 000000000000..e071cddb28fc
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm63148.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm63148", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		B15_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b15";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B15_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b15";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B15_0>, <&B15_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@80030000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x80030000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffe8000 0x8000>;
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@100 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x100 0x04>, <0x114 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@104 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x104 0x04>, <0x118 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@108 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x108 0x04>, <0x11c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@10c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x10c 0x04>, <0x120 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@110 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x110 0x04>, <0x124 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@300 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x300 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		uart0: serial@600 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x600 0x20>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		leds: led-controller@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x700 0xdc>;
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x2000 0x600>, <0xf0 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm63178.dtsi b/arch/arm/boot/dts/broadcom/bcm63178.dtsi
new file mode 100644
index 000000000000..430750b3030f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm63178.dtsi
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm63178", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63178-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		leds: led-controller@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x3000 0xdc>;
+			status = "disabled";
+		};
+
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm6756.dtsi b/arch/arm/boot/dts/broadcom/bcm6756.dtsi
index ce1b59faf800..6433f8fa5eff 100644
--- a/arch/arm/boot/dts/bcm6756.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm6756.dtsi
@@ -51,6 +51,8 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -87,6 +89,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -118,6 +126,33 @@
 		#size-cells = <1>;
 		ranges = <0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts b/arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts
new file mode 100644
index 000000000000..a3616fb7b3a8
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "bcm6846.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Genexis XG6846B Ethernet layer 2/3 router";
+	compatible = "genexis,xg6846b", "brcm,bcm6846", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* Micron D9PTK 256 MB RAM */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		secondary-boot@0 {
+			no-map;
+			reg = <0x00000000 0x00008000>;
+		};
+		pmc3-firmware@8000 {
+			no-map;
+			reg = <0x00008000 0x00100000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20000>;
+
+		/* Called "canyon rescue button" in the vendor DTB */
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 41 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+	/* Totally 79 GPIOs are available */
+	ngpios = <15>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+	brcm,serial-shift-bits = <16>;
+
+	led@0 {
+		reg = <0>;
+		active-low;
+		function = "ext";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@1 {
+		reg = <1>;
+		active-low;
+		function = "ext";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@3 {
+		reg = <3>;
+		active-low;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@4 {
+		reg = <4>;
+		active-low;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@5 {
+		reg = <5>;
+		active-low;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@6 {
+		reg = <6>;
+		active-low;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_RED>;
+	};
+
+	led@15 {
+		reg = <15>;
+		active-low;
+		function = LED_FUNCTION_USB;
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@7 {
+		/* Activity 03 */
+		reg = <7>;
+		active-low;
+		function = "lan1";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@8 {
+		/* Activity 04 */
+		reg = <8>;
+		active-low;
+		function = "lan1";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@9 {
+		/* Activity 03 */
+		reg = <9>;
+		active-low;
+		function = "lan2";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@10 {
+		/* Activity 04 */
+		reg = <10>;
+		active-low;
+		function = "lan2";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@11 {
+		/* Activity 03 */
+		reg = <11>;
+		active-low;
+		function = "lan3";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@12 {
+		/* Activity 04 */
+		reg = <12>;
+		active-low;
+		function = "lan3";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@13 {
+		/* Activity 03 */
+		reg = <13>;
+		active-low;
+		function = "lan4";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@14 {
+		/* Activity 04 */
+		reg = <14>;
+		active-low;
+		function = "lan4";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+
+	/* Winbond W29N02GV, 256MB with 128KB erase blocks */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		loader@0 {
+			label = "loader";
+			reg = <0x00000000 0x00400000>;
+		};
+		image@400000 {
+			label = "image";
+			reg = <0x00400000 0x0fb00000>;
+		};
+		/* 0x00ff0000-0x00ffffff: bad block list */
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+	phy2: ethernet-phy@2 {
+		reg = <2>;
+	};
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+	phy21: ethernet-phy@21 {
+		reg = <21>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6846.dtsi b/arch/arm/boot/dts/broadcom/bcm6846.dtsi
new file mode 100644
index 000000000000..f5591a45d2e4
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6846.dtsi
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6846", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x1b>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		leds: led-controller@800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6846-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		mdio: mdio@2060 {
+			compatible = "brcm,bcm6846-mdio";
+			reg = <0x02060 0x10>, <0x5a068 0x4>;
+			reg-names = "mdio", "mdio_indir_rw";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pl081_dma: dma-controller@59000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x59000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6855.dtsi b/arch/arm/boot/dts/broadcom/bcm6855.dtsi
new file mode 100644
index 000000000000..a88c3f0fbcb0
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6855.dtsi
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6855", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		watchdog@4c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x4c0 0x10>;
+			status = "disabled";
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6855-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		leds: led-controller@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x3000 0xdc>;
+			status = "disabled";
+		};
+
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart1: serial@13000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x13000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6878.dtsi b/arch/arm/boot/dts/broadcom/bcm6878.dtsi
new file mode 100644
index 000000000000..dd837bf69390
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6878.dtsi
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6878", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		watchdog@4c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x4c0 0x10>;
+			status = "disabled";
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		leds: led-controller@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x700 0xdc>;
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6878-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/broadcom/bcm7445-bcm97445svmb.dts
index f92d2cf85972..f92d2cf85972 100644
--- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
+++ b/arch/arm/boot/dts/broadcom/bcm7445-bcm97445svmb.dts
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/broadcom/bcm7445.dtsi
index 5ac2042515b8..c6307c7437e3 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm7445.dtsi
@@ -237,7 +237,8 @@
 			ranges = <0x0 0x0 0x80000>;
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x800>;
 			};
 
@@ -259,7 +260,8 @@
 			ranges = <0x0 0x80000 0x80000>;
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x800>;
 			};
 
@@ -281,7 +283,8 @@
 			ranges = <0x0 0x100000 0x80000>;
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x800>;
 			};
 
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/broadcom/bcm911360_entphn.dts
index 363009e747b3..363009e747b3 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/broadcom/bcm911360_entphn.dts
diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/broadcom/bcm911360k.dts
index 091c73a46e08..091c73a46e08 100644
--- a/arch/arm/boot/dts/bcm911360k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm911360k.dts
diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/broadcom/bcm94708.dts
index d9eb2040b963..d9eb2040b963 100644
--- a/arch/arm/boot/dts/bcm94708.dts
+++ b/arch/arm/boot/dts/broadcom/bcm94708.dts
diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/broadcom/bcm94709.dts
index 618c812eef73..618c812eef73 100644
--- a/arch/arm/boot/dts/bcm94709.dts
+++ b/arch/arm/boot/dts/broadcom/bcm94709.dts
diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/broadcom/bcm947189acdbmr.dts
index 16e70a264faf..0b8727ae6f16 100644
--- a/arch/arm/boot/dts/bcm947189acdbmr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm947189acdbmr.dts
@@ -25,17 +25,17 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
@@ -60,9 +60,9 @@
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 21 0>;
-		gpio-miso = <&chipcommon 22 0>;
-		gpio-mosi = <&chipcommon 23 0>;
+		sck-gpios = <&chipcommon 21 0>;
+		miso-gpios = <&chipcommon 22 0>;
+		mosi-gpios = <&chipcommon 23 0>;
 		cs-gpios = <&chipcommon 24 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/broadcom/bcm947622.dts b/arch/arm/boot/dts/broadcom/bcm947622.dts
new file mode 100644
index 000000000000..6241485408d3
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm947622.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm47622.dtsi"
+
+/ {
+	model = "Broadcom BCM947622 Reference Board";
+	compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/broadcom/bcm953012er.dts
index 4fe3b3653376..d939ec9f4a9e 100644
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ b/arch/arm/boot/dts/broadcom/bcm953012er.dts
@@ -84,6 +84,14 @@
 			label = "cpu";
 			ethernet = <&gmac0>;
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/broadcom/bcm953012hr.dts
index b070b69466bd..b728cd54715e 100644
--- a/arch/arm/boot/dts/bcm953012hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm953012hr.dts
@@ -74,7 +74,6 @@
 &spi_nor {
 	status = "okay";
 	spi-max-frequency = <62500000>;
-	m25p,default-addr-width = <3>;
 
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/broadcom/bcm953012k.dts
index f1e6bcaa1edd..27c0992f1855 100644
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm953012k.dts
@@ -84,7 +84,6 @@
 &spi_nor {
 	status = "okay";
 	spi-max-frequency = <62500000>;
-	m25p,default-addr-width = <3>;
 
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/broadcom/bcm958300k.dts
index dda3e11b711f..dda3e11b711f 100644
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958300k.dts
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/broadcom/bcm958305k.dts
index ea3c6b88b313..ea3c6b88b313 100644
--- a/arch/arm/boot/dts/bcm958305k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958305k.dts
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/broadcom/bcm958522er.dts
index 15f023656df0..2f20f86bd31c 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958522er.dts
@@ -135,7 +135,6 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/broadcom/bcm958525er.dts
index 9b9c225a1fb3..980c03f74a19 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958525er.dts
@@ -135,7 +135,6 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/broadcom/bcm958525xmc.dts
index ca9311452739..440bb2d617f2 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958525xmc.dts
@@ -151,7 +151,6 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/broadcom/bcm958622hr.dts
index 9db3c851451a..116f3a7c3bc6 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958622hr.dts
@@ -139,7 +139,6 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/broadcom/bcm958623hr.dts
index 32786e7c4e12..fc6ab73ecf56 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958623hr.dts
@@ -143,7 +143,6 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi
index c54451dde6dd..c54451dde6dd 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi
diff --git a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi
index 1830844c8404..1830844c8404 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64-a0.dts
index 9944566c1195..9944566c1195 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64-a0.dts
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64.dts
index 06939438e874..06939438e874 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-mx64.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64.dts
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w-a0.dts
index 112fddb1eed8..112fddb1eed8 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w-a0.dts
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w.dts
index de2e367c3e78..de2e367c3e78 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w.dts
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65.dts
index d1b684dcdbfa..d1b684dcdbfa 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-mx65.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65.dts
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65w.dts
index a2165aba3676..a2165aba3676 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65w.dts
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
index b0854d881ac6..7e71aecb7251 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
@@ -17,21 +17,21 @@
 		led-1 {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_RED>;
-			pwms = <&pwm 1 50000>;
+			pwms = <&pwm 1 50000 0>;
 			max-brightness = <255>;
 		};
 
 		led-2 {
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_GREEN>;
-			pwms = <&pwm 2 50000>;
+			pwms = <&pwm 2 50000 0>;
 			max-brightness = <255>;
 		};
 
 		led-3 {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_BLUE>;
-			pwms = <&pwm 3 50000>;
+			pwms = <&pwm 3 50000 0>;
 			max-brightness = <255>;
 		};
 	};
@@ -55,11 +55,15 @@
 		reg = <0x50>;
 		pagesize = <32>;
 		read-only;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
-		mac_address: mac-address@66 {
-			reg = <0x66 0x6>;
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mac_address: mac-address@66 {
+				reg = <0x66 0x6>;
+			};
 		};
 	};
 };
@@ -128,7 +132,6 @@
 
 &pwm {
 	status = "okay";
-	#pwm-cells = <2>;
 };
 
 &uart0 {
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/broadcom/bcm958625hr.dts
index 74263d98de73..a9b6aa04d573 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958625hr.dts
@@ -150,7 +150,6 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/broadcom/bcm958625k.dts
index 69ebc7a913a7..7996116fc923 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958625k.dts
@@ -154,7 +154,6 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/broadcom/bcm963138.dts b/arch/arm/boot/dts/broadcom/bcm963138.dts
new file mode 100644
index 000000000000..7fd87e05ec20
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963138.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63138.dtsi"
+
+/ {
+	model = "Broadcom BCM963138 Reference Board";
+	compatible = "brcm,bcm963138", "brcm,bcm63138", "brcm,bcmbca";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serial0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/broadcom/bcm963138dvt.dts
index 15bec75be74c..f60d09908ab9 100644
--- a/arch/arm/boot/dts/bcm963138dvt.dts
+++ b/arch/arm/boot/dts/broadcom/bcm963138dvt.dts
@@ -32,15 +32,15 @@
 };
 
 &nand_controller {
+	brcm,wp-not-connected;
 	status = "okay";
+};
 
-	nand@0 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		brcm,nand-oob-sectors-size = <16>;
-	};
+&nandcs {
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+	brcm,nand-oob-sector-size = <16>;
+	nand-on-flash-bbt;
 };
 
 &ahci {
@@ -50,3 +50,7 @@
 &sata_phy {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm963148.dts b/arch/arm/boot/dts/broadcom/bcm963148.dts
new file mode 100644
index 000000000000..44bca063a327
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963148.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63148.dtsi"
+
+/ {
+	model = "Broadcom BCM963148 Reference Board";
+	compatible = "brcm,bcm963148", "brcm,bcm63148", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm963178.dts b/arch/arm/boot/dts/broadcom/bcm963178.dts
new file mode 100644
index 000000000000..098a222cd71a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963178.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63178.dtsi"
+
+/ {
+	model = "Broadcom BCM963178 Reference Board";
+	compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96756.dts b/arch/arm/boot/dts/broadcom/bcm96756.dts
new file mode 100644
index 000000000000..402038d3cd0c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96756.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6756.dtsi"
+
+/ {
+	model = "Broadcom BCM96756 Reference Board";
+	compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96846.dts b/arch/arm/boot/dts/broadcom/bcm96846.dts
new file mode 100644
index 000000000000..943896afb7cc
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96846.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6846.dtsi"
+
+/ {
+	model = "Broadcom BCM96846 Reference Board";
+	compatible = "brcm,bcm96846", "brcm,bcm6846", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96855.dts b/arch/arm/boot/dts/broadcom/bcm96855.dts
new file mode 100644
index 000000000000..571663d9a1ea
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96855.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6855.dtsi"
+
+/ {
+	model = "Broadcom BCM96855 Reference Board";
+	compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96878.dts b/arch/arm/boot/dts/broadcom/bcm96878.dts
new file mode 100644
index 000000000000..8d6eddd54c6e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96878.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6878.dtsi"
+
+/ {
+	model = "Broadcom BCM96878 Reference Board";
+	compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/broadcom/bcm988312hr.dts
index e96bc3f2d5cf..663a3f27b6e4 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm988312hr.dts
@@ -139,7 +139,6 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm9hmidc.dtsi b/arch/arm/boot/dts/broadcom/bcm9hmidc.dtsi
index 65397c088335..65397c088335 100644
--- a/arch/arm/boot/dts/bcm9hmidc.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm9hmidc.dtsi
diff --git a/arch/arm/boot/dts/calxeda/Makefile b/arch/arm/boot/dts/calxeda/Makefile
new file mode 100644
index 000000000000..f5126b6d26ad
--- /dev/null
+++ b/arch/arm/boot/dts/calxeda/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_HIGHBANK) += \
+	highbank.dtb \
+	ecx-2000.dtb
+dtb-$(CONFIG_ARCH_HIGHBANK) += \
+	highbank.dtb \
+	ecx-2000.dtb
diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/calxeda/ecx-2000.dts
index f6eb71553b95..f6eb71553b95 100644
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ b/arch/arm/boot/dts/calxeda/ecx-2000.dts
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/calxeda/ecx-common.dtsi
index ce5221c6b358..ce5221c6b358 100644
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ b/arch/arm/boot/dts/calxeda/ecx-common.dtsi
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/calxeda/highbank.dts
index b6b0225a769e..b6b0225a769e 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/calxeda/highbank.dts
diff --git a/arch/arm/boot/dts/cirrus/Makefile b/arch/arm/boot/dts/cirrus/Makefile
new file mode 100644
index 000000000000..e6015983e464
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_CLPS711X) += \
+	ep7211-edb7211.dtb
+dtb-$(CONFIG_ARCH_CLPS711X) += \
+	ep7211-edb7211.dtb
+dtb-$(CONFIG_ARCH_EP93XX) += \
+	ep93xx-edb9302.dtb \
+	ep93xx-bk3.dtb \
+	ep93xx-ts7250.dtb
diff --git a/arch/arm/boot/dts/ep7209.dtsi b/arch/arm/boot/dts/cirrus/ep7209.dtsi
index 57bdad2c1994..57bdad2c1994 100644
--- a/arch/arm/boot/dts/ep7209.dtsi
+++ b/arch/arm/boot/dts/cirrus/ep7209.dtsi
diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
index 7fb532f227af..0b15ccaa762e 100644
--- a/arch/arm/boot/dts/ep7211-edb7211.dts
+++ b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
@@ -30,7 +30,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 320x240 {
+			timing0: timing-320x240 {
 				hactive = <320>;
 				hback-porch = <0>;
 				hfront-porch = <0>;
@@ -46,8 +46,8 @@
 
 	i2c: i2c {
 		compatible = "i2c-gpio";
-		gpios = <&portd 4 GPIO_ACTIVE_HIGH>,
-			<&portd 5 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&portd 4 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&portd 5 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,delay-us = <2>;
 		i2c-gpio,scl-output-only;
 		#address-cells = <1>;
@@ -88,7 +88,7 @@
 };
 
 &portd {
-	lcden {
+	lcden-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/ep7211.dtsi b/arch/arm/boot/dts/cirrus/ep7211.dtsi
index 32a4e1237145..32a4e1237145 100644
--- a/arch/arm/boot/dts/ep7211.dtsi
+++ b/arch/arm/boot/dts/cirrus/ep7211.dtsi
diff --git a/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts b/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts
new file mode 100644
index 000000000000..40bc9b2a6ba8
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Liebherr controller BK3.1 based on Cirrus EP9302 SoC
+ */
+/dts-v1/;
+#include "ep93xx.dtsi"
+
+/ {
+	model = "Liebherr controller BK3.1";
+	compatible = "liebherr,bk3", "cirrus,ep9301";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* should be set from ATAGS */
+		reg = <0x00000000 0x02000000>,
+		      <0x000530c0 0x01fdd000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "grled";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+
+		led-1 {
+			label = "rdled";
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_FAULT;
+		};
+	};
+};
+
+&ebi {
+	nand-controller@60000000 {
+		compatible = "technologic,ts7200-nand";
+		reg = <0x60000000 0x8000000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nand@0 {
+			reg = <0>;
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "System";
+					reg = <0x00000000 0x01e00000>;
+					read-only;
+				};
+
+				partition@1e00000 {
+					label = "Data";
+					reg = <0x01e00000 0x05f20000>;
+				};
+
+				partition@7d20000 {
+					label = "RedBoot";
+					reg = <0x07d20000 0x002e0000>;
+					read-only;
+				};
+			};
+		};
+	};
+};
+
+&eth0 {
+	phy-handle = <&phy0>;
+};
+
+&i2s {
+	dmas = <&dma0 0 1>, <&dma0 0 2>;
+	dma-names = "tx", "rx";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_on_ac97_pins>;
+	status = "okay";
+};
+
+&gpio1 {
+	/* PWM */
+	gpio-ranges = <&syscon 6 163 1>;
+};
+
+&gpio4 {
+	gpio-ranges = <&syscon 0 97 2>;
+	status = "okay";
+};
+
+&gpio6 {
+	gpio-ranges = <&syscon 0 87 2>;
+	status = "okay";
+};
+
+&gpio7 {
+	gpio-ranges = <&syscon 2 199 4>;
+	status = "okay";
+};
+
+&mdio0 {
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts b/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts
new file mode 100644
index 000000000000..312b2be1c638
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/*
+ * Device Tree file for Cirrus Logic EDB9302 board based on EP9302 SoC
+ */
+/dts-v1/;
+#include "ep93xx.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "cirrus,edb9302", "cirrus,ep9301";
+	model = "cirrus,edb9302";
+
+	chosen {
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* should be set from ATAGS */
+		reg = <0x0000000 0x800000>,
+		      <0x1000000 0x800000>,
+		      <0x4000000 0x800000>,
+		      <0x5000000 0x800000>;
+	};
+
+	sound {
+		compatible = "audio-graph-card2";
+		label = "EDB93XX";
+		links = <&i2s_port>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "grled";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+
+		led-1 {
+			label = "rdled";
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_FAULT;
+		};
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&ebi {
+	flash@60000000 {
+		compatible = "cfi-flash";
+		reg = <0x60000000 0x1000000>;
+		bank-width = <2>;
+	};
+};
+
+&eth0 {
+	phy-handle = <&phy0>;
+};
+
+&gpio0 {
+	gpio-ranges = <&syscon 0 153 1>,
+		      <&syscon 1 152 1>,
+		      <&syscon 2 151 1>,
+		      <&syscon 3 148 1>,
+		      <&syscon 4 147 1>,
+		      <&syscon 5 146 1>,
+		      <&syscon 6 145 1>,
+		      <&syscon 7 144 1>;
+};
+
+&gpio1 {
+	gpio-ranges = <&syscon 0 143 1>,
+		      <&syscon 1 142 1>,
+		      <&syscon 2 141 1>,
+		      <&syscon 3 140 1>,
+		      <&syscon 4 165 1>,
+		      <&syscon 5 164 1>,
+		      <&syscon 6 163 1>,
+		      <&syscon 7 160 1>;
+};
+
+&gpio2 {
+	gpio-ranges = <&syscon 0 115 1>;
+};
+
+/* edb9302 doesn't have GPIO Port D present */
+&gpio3 {
+	status = "disabled";
+};
+
+&gpio4 {
+	gpio-ranges = <&syscon 0 97 2>;
+};
+
+&gpio5 {
+	gpio-ranges = <&syscon 1 170 1>,
+		      <&syscon 2 169 1>,
+		      <&syscon 3 168 1>;
+};
+
+&gpio6 {
+	gpio-ranges = <&syscon 0 87 2>;
+};
+
+&gpio7 {
+	gpio-ranges = <&syscon 2 199 4>;
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_on_ac97_pins>;
+	status = "okay";
+	i2s_port: port {
+		i2s_ep: endpoint {
+			system-clock-direction-out;
+			frame-master;
+			bitclock-master;
+			mclk-fs = <256>;
+			dai-format = "i2s";
+			convert-channels = <2>;
+			convert-sample-format = "s32_le";
+			remote-endpoint = <&codec_ep>;
+		};
+	};
+};
+
+&mdio0 {
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&spi0 {
+	cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW
+		    &gpio0 7 GPIO_ACTIVE_LOW>;
+	dmas = <&dma1 10 2>, <&dma1 10 1>;
+	dma-names = "rx", "tx";
+	status = "okay";
+
+	cs4271: codec@0 {
+		compatible = "cirrus,cs4271";
+		reg = <0>;
+		#sound-dai-cells = <0>;
+		spi-max-frequency = <6000000>;
+		spi-cpol;
+		spi-cpha;
+		reset-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		port {
+			codec_ep: endpoint {
+				remote-endpoint = <&i2s_ep>;
+			};
+		};
+	};
+
+	at25f1024: eeprom@1 {
+		compatible = "atmel,at25";
+		reg = <1>;
+		address-width = <8>;
+		size = <0x20000>;
+		pagesize = <256>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts b/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts
new file mode 100644
index 000000000000..9e03f93d9fc8
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Technologic Systems ts7250 board based on Cirrus EP9302 SoC
+ */
+/dts-v1/;
+#include "ep93xx.dtsi"
+
+/ {
+	compatible = "technologic,ts7250", "cirrus,ep9301";
+	model = "TS-7250 SBC";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* should be set from ATAGS */
+		reg = <0x00000000 0x02000000>,
+		      <0x000530c0 0x01fdd000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "grled";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+
+		led-1 {
+			label = "rdled";
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_FAULT;
+		};
+	};
+};
+
+&ebi {
+	nand-controller@60000000 {
+		compatible = "technologic,ts7200-nand";
+		reg = <0x60000000 0x8000000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nand@0 {
+			reg = <0>;
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "TS-BOOTROM";
+					reg = <0x00000000 0x00020000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "Linux";
+					reg = <0x00020000 0x07d00000>;
+				};
+
+				partition@7d20000 {
+					label = "RedBoot";
+					reg = <0x07d20000 0x002e0000>;
+					read-only;
+				};
+			};
+		};
+	};
+
+	rtc@10800000 {
+		compatible = "st,m48t86";
+		reg = <0x10800000 0x1>,
+			<0x11700000 0x1>;
+	};
+
+	watchdog@23800000 {
+		compatible = "technologic,ts7200-wdt";
+		reg = <0x23800000 0x01>,
+			<0x23c00000 0x01>;
+		timeout-sec = <30>;
+	};
+};
+
+&eth0 {
+	phy-handle = <&phy0>;
+};
+
+&gpio1 {
+	/* PWM */
+	gpio-ranges = <&syscon 6 163 1>;
+};
+
+/* ts7250 doesn't have GPIO Port D present */
+&gpio3 {
+	status = "disabled";
+};
+
+&gpio4 {
+	gpio-ranges = <&syscon 0 97 2>;
+};
+
+&gpio6 {
+	gpio-ranges = <&syscon 0 87 2>;
+};
+
+&gpio7 {
+	gpio-ranges = <&syscon 2 199 4>;
+};
+
+&spi0 {
+	cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+	dmas = <&dma1 10 2>, <&dma1 10 1>;
+	dma-names = "rx", "tx";
+	status = "okay";
+
+	tmp122: temperature-sensor@0 {
+		compatible = "ti,tmp122";
+		reg = <0>;
+		spi-max-frequency = <2000000>;
+	};
+};
+
+&mdio0 {
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/cirrus/ep93xx.dtsi b/arch/arm/boot/dts/cirrus/ep93xx.dtsi
new file mode 100644
index 000000000000..0dd1eee346ca
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx.dtsi
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Cirrus Logic systems EP93XX SoC
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+/ {
+	soc: soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		syscon: syscon@80930000 {
+			compatible = "cirrus,ep9301-syscon", "syscon";
+			reg = <0x80930000 0x1000>;
+
+			#clock-cells = <1>;
+			clocks = <&xtali>;
+
+			spi_default_pins: pins-spi {
+				function = "spi";
+				groups = "ssp";
+			};
+
+			ac97_default_pins: pins-ac97 {
+				function = "ac97";
+				groups = "ac97";
+			};
+
+			i2s_on_ssp_pins: pins-i2sonssp {
+				function = "i2s";
+				groups = "i2s_on_ssp";
+			};
+
+			i2s_on_ac97_pins: pins-i2sonac97 {
+				function = "i2s";
+				groups = "i2s_on_ac97";
+			};
+
+			gpio1_default_pins: pins-gpio1 {
+				function = "gpio";
+				groups = "gpio1agrp";
+			};
+
+			pwm1_default_pins: pins-pwm1 {
+				function = "pwm";
+				groups = "pwm1";
+			};
+
+			gpio2_default_pins: pins-gpio2 {
+				function = "gpio";
+				groups = "gpio2agrp";
+			};
+
+			gpio3_default_pins: pins-gpio3 {
+				function = "gpio";
+				groups = "gpio3agrp";
+			};
+
+			keypad_default_pins: pins-keypad {
+				function = "keypad";
+				groups = "keypadgrp";
+			};
+
+			gpio4_default_pins: pins-gpio4 {
+				function = "gpio";
+				groups = "gpio4agrp";
+			};
+
+			gpio6_default_pins: pins-gpio6 {
+				function = "gpio";
+				groups = "gpio6agrp";
+			};
+
+			gpio7_default_pins: pins-gpio7 {
+				function = "gpio";
+				groups = "gpio7agrp";
+			};
+
+			ide_default_pins: pins-ide {
+				function = "pata";
+				groups = "idegrp";
+			};
+
+			lcd_on_dram0_pins: pins-rasteronsdram0 {
+				function = "lcd";
+				groups = "rasteronsdram0grp";
+			};
+
+			lcd_on_dram3_pins: pins-rasteronsdram3 {
+				function = "lcd";
+				groups = "rasteronsdram3grp";
+			};
+		};
+
+		adc: adc@80900000 {
+			compatible = "cirrus,ep9301-adc";
+			reg = <0x80900000 0x28>;
+			clocks = <&syscon EP93XX_CLK_ADC>;
+			interrupt-parent = <&vic0>;
+			interrupts = <30>;
+			status = "disabled";
+		};
+
+		/*
+		 * The EP93XX expansion bus is a set of up to 7 each up to 16MB
+		 * windows in the 256MB space from 0x50000000 to 0x5fffffff.
+		 * But since we don't require to setup it in any way, we can
+		 * represent it as a simple-bus.
+		 */
+		ebi: bus@80080000 {
+			compatible = "simple-bus";
+			reg = <0x80080000 0x20>;
+			native-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+		};
+
+		dma0: dma-controller@80000000 {
+			compatible = "cirrus,ep9301-dma-m2p";
+			reg = <0x80000000 0x0040>,
+			      <0x80000040 0x0040>,
+			      <0x80000080 0x0040>,
+			      <0x800000c0 0x0040>,
+			      <0x80000240 0x0040>,
+			      <0x80000200 0x0040>,
+			      <0x800002c0 0x0040>,
+			      <0x80000280 0x0040>,
+			      <0x80000340 0x0040>,
+			      <0x80000300 0x0040>;
+			clocks = <&syscon EP93XX_CLK_M2P0>,
+				 <&syscon EP93XX_CLK_M2P1>,
+				 <&syscon EP93XX_CLK_M2P2>,
+				 <&syscon EP93XX_CLK_M2P3>,
+				 <&syscon EP93XX_CLK_M2P4>,
+				 <&syscon EP93XX_CLK_M2P5>,
+				 <&syscon EP93XX_CLK_M2P6>,
+				 <&syscon EP93XX_CLK_M2P7>,
+				 <&syscon EP93XX_CLK_M2P8>,
+				 <&syscon EP93XX_CLK_M2P9>;
+			clock-names = "m2p0", "m2p1",
+				      "m2p2", "m2p3",
+				      "m2p4", "m2p5",
+				      "m2p6", "m2p7",
+				      "m2p8", "m2p9";
+			interrupt-parent = <&vic0>;
+			interrupts = <7>, <8>, <9>, <10>, <11>,
+				<12>, <13>, <14>, <15>, <16>;
+			#dma-cells = <2>;
+		};
+
+		dma1: dma-controller@80000100 {
+			compatible = "cirrus,ep9301-dma-m2m";
+			reg = <0x80000100 0x0040>,
+			      <0x80000140 0x0040>;
+			clocks = <&syscon EP93XX_CLK_M2M0>,
+				 <&syscon EP93XX_CLK_M2M1>;
+			clock-names = "m2m0", "m2m1";
+			interrupt-parent = <&vic0>;
+			interrupts = <17>, <18>;
+			#dma-cells = <2>;
+		};
+
+		eth0: ethernet@80010000 {
+			compatible = "cirrus,ep9301-eth";
+			reg = <0x80010000 0x10000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <7>;
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gpio0: gpio@80840000 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840000 0x04>,
+			      <0x80840010 0x04>,
+			      <0x80840090 0x1c>;
+			reg-names = "data", "dir", "intr";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&vic1>;
+			interrupts = <27>;
+		};
+
+		gpio1: gpio@80840004 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840004 0x04>,
+			      <0x80840014 0x04>,
+			      <0x808400ac 0x1c>;
+			reg-names = "data", "dir", "intr";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&vic1>;
+			interrupts = <27>;
+		};
+
+		gpio2: gpio@80840008 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840008 0x04>,
+			      <0x80840018 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio2_default_pins>;
+		};
+
+		gpio3: gpio@8084000c {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x8084000c 0x04>,
+			      <0x8084001c 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio3_default_pins>;
+		};
+
+		gpio4: gpio@80840020 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840020 0x04>,
+			      <0x80840024 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio4_default_pins>;
+		};
+
+		gpio5: gpio@80840030 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840030 0x04>,
+			      <0x80840034 0x04>,
+			      <0x8084004c 0x1c>;
+			reg-names = "data", "dir", "intr";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts-extended = <&vic0 19>, <&vic0 20>,
+					      <&vic0 21>, <&vic0 22>,
+					      <&vic1 15>, <&vic1 16>,
+					      <&vic1 17>, <&vic1 18>;
+		};
+
+		gpio6: gpio@80840038 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840038 0x04>,
+			      <0x8084003c 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio6_default_pins>;
+		};
+
+		gpio7: gpio@80840040 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840040 0x04>,
+			      <0x80840044 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio7_default_pins>;
+		};
+
+		i2s: i2s@80820000 {
+			compatible = "cirrus,ep9301-i2s";
+			reg = <0x80820000 0x100>;
+			#sound-dai-cells = <0>;
+			interrupt-parent = <&vic1>;
+			interrupts = <28>;
+			clocks = <&syscon EP93XX_CLK_I2S_MCLK>,
+				 <&syscon EP93XX_CLK_I2S_SCLK>,
+				 <&syscon EP93XX_CLK_I2S_LRCLK>;
+			clock-names = "mclk", "sclk", "lrclk";
+			dmas = <&dma0 0 1>, <&dma0 0 2>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		ide: ide@800a0000 {
+			compatible = "cirrus,ep9312-pata";
+			reg = <0x800a0000 0x38>;
+			interrupt-parent = <&vic1>;
+			interrupts = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ide_default_pins>;
+			status = "disabled";
+		};
+
+		vic0: interrupt-controller@800b0000 {
+			compatible = "arm,pl192-vic";
+			reg = <0x800b0000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-mask = <0x7ffffffc>;
+			valid-wakeup-mask = <0x0>;
+		};
+
+		vic1: interrupt-controller@800c0000 {
+			compatible = "arm,pl192-vic";
+			reg = <0x800c0000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-mask = <0x1fffffff>;
+			valid-wakeup-mask = <0x0>;
+		};
+
+		keypad: keypad@800f0000 {
+			compatible = "cirrus,ep9307-keypad";
+			reg = <0x800f0000 0x0c>;
+			interrupt-parent = <&vic0>;
+			interrupts = <29>;
+			clocks = <&syscon EP93XX_CLK_KEYPAD>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&keypad_default_pins>;
+			linux,keymap =	<KEY_UP>,
+					<KEY_DOWN>,
+					<KEY_VOLUMEDOWN>,
+					<KEY_HOME>,
+					<KEY_RIGHT>,
+					<KEY_LEFT>,
+					<KEY_ENTER>,
+					<KEY_VOLUMEUP>,
+					<KEY_F6>,
+					<KEY_F8>,
+					<KEY_F9>,
+					<KEY_F10>,
+					<KEY_F1>,
+					<KEY_F2>,
+					<KEY_F3>,
+					<KEY_POWER>;
+		};
+
+		pwm0: pwm@80910000 {
+			compatible = "cirrus,ep9301-pwm";
+			reg = <0x80910000 0x10>;
+			clocks = <&syscon EP93XX_CLK_PWM>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@80910020 {
+			compatible = "cirrus,ep9301-pwm";
+			reg = <0x80910020 0x10>;
+			clocks = <&syscon EP93XX_CLK_PWM>;
+			#pwm-cells = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm1_default_pins>;
+			status = "disabled";
+		};
+
+		rtc0: rtc@80920000 {
+			compatible = "cirrus,ep9301-rtc";
+			reg = <0x80920000 0x100>;
+		};
+
+		spi0: spi@808a0000 {
+			compatible = "cirrus,ep9301-spi";
+			reg = <0x808a0000 0x18>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&vic1>;
+			interrupts = <21>;
+			clocks = <&syscon EP93XX_CLK_SPI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi_default_pins>;
+			status = "disabled";
+		};
+
+		timer: timer@80810000 {
+			compatible = "cirrus,ep9301-timer";
+			reg = <0x80810000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <19>;
+		};
+
+		uart0: serial@808c0000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x808c0000 0x1000>;
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&syscon EP93XX_CLK_UART1>, <&syscon EP93XX_CLK_UART>;
+			clock-names = "uartclk", "apb_pclk";
+			interrupt-parent = <&vic1>;
+			interrupts = <20>;
+			status = "disabled";
+		};
+
+		uart1: uart@808d0000 {
+			compatible = "arm,primecell";
+			reg = <0x808d0000 0x1000>;
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&syscon EP93XX_CLK_UART2>, <&syscon EP93XX_CLK_UART>;
+			clock-names = "apb:uart2", "apb_pclk";
+			interrupt-parent = <&vic1>;
+			interrupts = <22>;
+			status = "disabled";
+		};
+
+		uart2: uart@808b0000 {
+			compatible = "arm,primecell";
+			reg = <0x808b0000 0x1000>;
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&syscon EP93XX_CLK_UART3>, <&syscon EP93XX_CLK_UART>;
+			clock-names = "apb:uart3", "apb_pclk";
+			interrupt-parent = <&vic1>;
+			interrupts = <23>;
+			status = "disabled";
+		};
+
+		usb0: usb@80020000 {
+			compatible = "generic-ohci";
+			reg = <0x80020000 0x10000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <24>;
+			clocks = <&syscon EP93XX_CLK_USB>;
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@80940000 {
+			compatible = "cirrus,ep9301-wdt";
+			reg = <0x80940000 0x08>;
+		};
+	};
+
+	xtali: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <14745600>;
+		clock-output-names = "xtali";
+	};
+};
diff --git a/arch/arm/boot/dts/cnxt/Makefile b/arch/arm/boot/dts/cnxt/Makefile
new file mode 100644
index 000000000000..d49df53f65a1
--- /dev/null
+++ b/arch/arm/boot/dts/cnxt/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_DIGICOLOR) += \
+	cx92755_equinox.dtb
+dtb-$(CONFIG_ARCH_DIGICOLOR) += \
+	cx92755_equinox.dtb
diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cnxt/cx92755.dtsi
index d2e8f36f8c60..227675fbe820 100644
--- a/arch/arm/boot/dts/cx92755.dtsi
+++ b/arch/arm/boot/dts/cnxt/cx92755.dtsi
@@ -107,7 +107,7 @@
 		reg = <0xf00003a0 0x10>;
 	};
 
-	uart0: uart@f0000740 {
+	uart0: serial@f0000740 {
 		compatible = "cnxt,cx92755-usart";
 		reg = <0xf0000740 0x20>;
 		clocks = <&main_clk>;
@@ -115,7 +115,7 @@
 		status = "disabled";
 	};
 
-	uart1: uart@f0000760 {
+	uart1: serial@f0000760 {
 		compatible = "cnxt,cx92755-usart";
 		reg = <0xf0000760 0x20>;
 		clocks = <&main_clk>;
@@ -123,7 +123,7 @@
 		status = "disabled";
 	};
 
-	uart2: uart@f0000780 {
+	uart2: serial@f0000780 {
 		compatible = "cnxt,cx92755-usart";
 		reg = <0xf0000780 0x20>;
 		clocks = <&main_clk>;
diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cnxt/cx92755_equinox.dts
index 026f556c8c50..026f556c8c50 100644
--- a/arch/arm/boot/dts/cx92755_equinox.dts
+++ b/arch/arm/boot/dts/cnxt/cx92755_equinox.dts
diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts
deleted file mode 100644
index 1e81d1b97055..000000000000
--- a/arch/arm/boot/dts/dove-d3plug.dts
+++ /dev/null
@@ -1,104 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "Globalscale D3Plug";
-	compatible = "globalscale,d3plug", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
-		pinctrl-names = "default";
-
-		wlan-act {
-			label = "wlan-act";
-			gpios = <&gpio0 0 1>;
-		};
-
-		wlan-ap {
-			label = "wlan-ap";
-			gpios = <&gpio0 1 1>;
-		};
-
-		status {
-			label = "status";
-			gpios = <&gpio0 2 1>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 8 0>;
-			pinctrl-0 = <&pmx_gpio_8>;
-			pinctrl-names = "default";
-		};
-	};
-};
-
-&uart0 { status = "okay"; };
-&sata0 { status = "okay"; };
-&i2c0 { status = "okay"; };
-
-/* Samsung M8G2F eMMC */
-&sdio0 {
-	status = "okay";
-	non-removable;
-	bus-width = <4>;
-};
-
-/* Marvell SD8787 WLAN/BT */
-&sdio1 {
-	status = "okay";
-	non-removable;
-};
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 2M Flash Macronix MX25L1605D */
-	flash@0 {
-		compatible = "st,m25l1605d";
-		spi-max-frequency = <86000000>;
-		reg = <0>;
-	};
-};
-
-&pcie {
-	status = "okay";
-	/* Fresco Logic USB3.0 xHCI controller */
-	pcie@1 {
-		status = "okay";
-		reset-gpios = <&gpio0 26 1>;
-		reset-delay-us = <20000>;
-		pinctrl-0 = <&pmx_camera_gpio>;
-		pinctrl-names = "default";
-	};
-	/* Mini-PCIe slot */
-	pcie@2 {
-		status = "okay";
-		reset-gpios = <&gpio0 25 1>;
-	};
-};
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
deleted file mode 100644
index 931db7932c11..000000000000
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ /dev/null
@@ -1,159 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "dra74x.dtsi"
-
-/ {
-	compatible = "ti,dra762", "ti,dra7";
-
-	ocp {
-		target-module@42c01900 {
-			compatible = "ti,sysc-dra7-mcan", "ti,sysc";
-			ranges = <0x0 0x42c00000 0x2000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x42c01900 0x4>,
-			      <0x42c01904 0x4>,
-			      <0x42c01908 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET |
-					 SYSC_DRA7_MCAN_ENAWAKEUP)>;
-			ti,syss-mask = <1>;
-			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_ADC_CLKCTRL 0>;
-			clock-names = "fck";
-
-			m_can0: mcan@1a00 {
-				compatible = "bosch,m_can";
-				reg = <0x1a00 0x4000>, <0x0 0x18FC>;
-				reg-names = "m_can", "message_ram";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "int0", "int1";
-				clocks = <&l3_iclk_div>, <&mcan_clk>;
-				clock-names = "hclk", "cclk";
-				bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
-			};
-		};
-	};
-
-};
-
-&l4_per3 {
-	target-module@1b0000 {			/* 0x489b0000, ap 25 34.0 */
-		compatible = "ti,sysc-omap4", "ti,sysc";
-		reg = <0x1b0000 0x4>,
-		      <0x1b0010 0x4>;
-		reg-names = "rev", "sysc";
-		ti,sysc-midle = <SYSC_IDLE_FORCE>,
-				<SYSC_IDLE_NO>;
-		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-				<SYSC_IDLE_NO>;
-		clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
-		clock-names = "fck";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x1b0000 0x10000>;
-
-		cal: cal@0 {
-			compatible = "ti,dra76-cal";
-			reg = <0x0000 0x400>,
-			      <0x0800 0x40>,
-			      <0x0900 0x40>;
-			reg-names = "cal_top",
-				    "cal_rx_core0",
-				    "cal_rx_core1";
-			interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
-			ti,camerrx-control = <&scm_conf 0x6dc>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				csi2_0: port@0 {
-					reg = <0>;
-				};
-				csi2_1: port@1 {
-					reg = <1>;
-				};
-			};
-		};
-	};
-};
-
-&scm_conf_clocks {
-	dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x03fc>;
-		ti,bit-shift = <20>;
-		ti,latch-bit = <26>;
-		assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
-		assigned-clock-rates = <80000000>;
-	};
-
-	dpll_gmac_h14x2_ctrl_mux_ck: dpll_gmac_h14x2_ctrl_mux_ck@3fc {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
-		reg = <0x3fc>;
-		ti,bit-shift = <29>;
-		ti,latch-bit = <26>;
-		assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
-		assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
-	};
-
-	mcan_clk: mcan_clk@3fc {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
-		ti,bit-shift = <27>;
-		reg = <0x3fc>;
-	};
-};
-
-&rtctarget {
-	status = "disabled";
-};
-
-&usb4_tm {
-	status = "disabled";
-};
-
-&mmc3 {
-	/* dra76x is not affected by i887 */
-	max-frequency = <96000000>;
-};
-
-&cpu0_opp_table {
-	opp_plus@1800000000 {
-		opp-hz = /bits/ 64 <1800000000>;
-		opp-microvolt = <1250000 950000 1250000>,
-				<1250000 950000 1250000>;
-		opp-supported-hw = <0xFF 0x08>;
-	};
-};
-
-&opp_supply_mpu {
-	ti,efuse-settings = <
-	/* uV   offset */
-	1060000 0x0
-	1160000 0x4
-	1210000 0x8
-	1250000 0xC
-	>;
-};
-
-&abb_mpu {
-	ti,abb_info = <
-	/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-	1060000		0	0x0	0 0x02000000 0x01F00000
-	1160000		0	0x4	0 0x02000000 0x01F00000
-	1210000		0	0x8	0 0x02000000 0x01F00000
-	1250000		0	0xC	0 0x02000000 0x01F00000
-	>;
-};
diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
deleted file mode 100644
index 58847d4fa846..000000000000
--- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
+++ /dev/null
@@ -1,979 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4412 SoCs pin-mux and pin-config device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4412 SoCs pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- */
-
-#include "exynos-pinctrl.h"
-
-#define PIN_SLP(_pin, _mode, _pull)					\
-	_pin {								\
-		samsung,pins = #_pin;					\
-		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
-		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
-	}
-
-&pinctrl_0 {
-	gpa0: gpa0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa1: gpa1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb: gpb-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc0: gpc0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc1: gpc1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd0: gpd0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd1: gpd1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf0: gpf0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf1: gpf1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf2: gpf2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf3: gpf3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj0: gpj0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj1: gpj1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	uart0_data: uart0-data-pins {
-		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart0_fctl: uart0-fctl-pins {
-		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart1_data: uart1-data-pins {
-		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart1_fctl: uart1-fctl-pins {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c2_bus: i2c2-bus-pins {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart2_data: uart2-data-pins {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart2_fctl: uart2-fctl-pins {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart_audio_a: uart-audio-a-pins {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c3_bus: i2c3-bus-pins {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart3_data: uart3-data-pins {
-		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart_audio_b: uart-audio-b-pins {
-		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi0_bus: spi0-bus-pins {
-		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c4_bus: i2c4-bus-pins {
-		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi1_bus: spi1-bus-pins {
-		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c5_bus: i2c5-bus-pins {
-		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2s1_bus: i2s1-bus-pins {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm1_bus: pcm1-bus-pins {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	ac97_bus: ac97-bus-pins {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2s2_bus: i2s2-bus-pins {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm2_bus: pcm2-bus-pins {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spdif_bus: spdif-bus-pins {
-		samsung,pins = "gpc1-0", "gpc1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c6_bus: i2c6-bus-pins {
-		samsung,pins = "gpc1-3", "gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi2_bus: spi2-bus-pins {
-		samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm0_out: pwm0-out-pins {
-		samsung,pins = "gpd0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm1_out: pwm1-out-pins {
-		samsung,pins = "gpd0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_ctrl: lcd-ctrl-pins {
-		samsung,pins = "gpd0-0", "gpd0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c7_bus: i2c7-bus-pins {
-		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm2_out: pwm2-out-pins {
-		samsung,pins = "gpd0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm3_out: pwm3-out-pins {
-		samsung,pins = "gpd0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c0_bus: i2c0-bus-pins {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	mipi0_clk: mipi0-clk-pins {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c1_bus: i2c1-bus-pins {
-		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	mipi1_clk: mipi1-clk-pins {
-		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_clk: lcd-clk-pins {
-		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_data16: lcd-data-width16-pins {
-		samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
-				"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
-				"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
-				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_data18: lcd-data-width18-pins {
-		samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
-				"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
-				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-				"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
-				"gpf3-2", "gpf3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_data24: lcd-data-width24-pins {
-		samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
-				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
-				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
-				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
-				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_ldi: lcd-ldi-pins {
-		samsung,pins = "gpf3-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_port_a_io: cam-port-a-io-pins {
-		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
-				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_port_a_clk_active: cam-port-a-clk-active-pins {
-		samsung,pins = "gpj1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
-		samsung,pins = "gpj1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_1 {
-	gpk0: gpk0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk1: gpk1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk2: gpk2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk3: gpk3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl0: gpl0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl1: gpl1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl2: gpl2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm0: gpm0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm1: gpm1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm2: gpm2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm3: gpm3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm4: gpm4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpy0: gpy0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy1: gpy1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy2: gpy2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy3: gpy3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy4: gpy4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy5: gpy5-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy6: gpy6-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpx0: gpx0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx1: gpx1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx2: gpx2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx3: gpx3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	sd0_clk: sd0-clk-pins {
-		samsung,pins = "gpk0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_cmd: sd0-cmd-pins {
-		samsung,pins = "gpk0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_cd: sd0-cd-pins {
-		samsung,pins = "gpk0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus1: sd0-bus-width1-pins {
-		samsung,pins = "gpk0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus4: sd0-bus-width4-pins {
-		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus8: sd0-bus-width8-pins {
-		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_clk: sd4-clk-pins {
-		samsung,pins = "gpk0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_cmd: sd4-cmd-pins {
-		samsung,pins = "gpk0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_cd: sd4-cd-pins {
-		samsung,pins = "gpk0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_bus1: sd4-bus-width1-pins {
-		samsung,pins = "gpk0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_bus4: sd4-bus-width4-pins {
-		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_bus8: sd4-bus-width8-pins {
-		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_clk: sd1-clk-pins {
-		samsung,pins = "gpk1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_cmd: sd1-cmd-pins {
-		samsung,pins = "gpk1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_cd: sd1-cd-pins {
-		samsung,pins = "gpk1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_bus1: sd1-bus-width1-pins {
-		samsung,pins = "gpk1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_bus4: sd1-bus-width4-pins {
-		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_clk: sd2-clk-pins {
-		samsung,pins = "gpk2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_cmd: sd2-cmd-pins {
-		samsung,pins = "gpk2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_cd: sd2-cd-pins {
-		samsung,pins = "gpk2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus1: sd2-bus-width1-pins {
-		samsung,pins = "gpk2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus4: sd2-bus-width4-pins {
-		samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus8: sd2-bus-width8-pins {
-		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_clk: sd3-clk-pins {
-		samsung,pins = "gpk3-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_cmd: sd3-cmd-pins {
-		samsung,pins = "gpk3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_cd: sd3-cd-pins {
-		samsung,pins = "gpk3-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_bus1: sd3-bus-width1-pins {
-		samsung,pins = "gpk3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_bus4: sd3-bus-width4-pins {
-		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	cam_port_b_io: cam-port-b-io-pins {
-		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
-				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_port_b_clk_active: cam-port-b-clk-active-pins {
-		samsung,pins = "gpm2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
-		samsung,pins = "gpm2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint0: ext-int0-pins {
-		samsung,pins = "gpx0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint8: ext-int8-pins {
-		samsung,pins = "gpx1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint15: ext-int15-pins {
-		samsung,pins = "gpx1-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint16: ext-int16-pins {
-		samsung,pins = "gpx2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint31: ext-int31-pins {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	fimc_is_i2c0: fimc-is-i2c0-pins {
-		samsung,pins = "gpm4-0", "gpm4-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	fimc_is_i2c1: fimc-is-i2c1-pins {
-		samsung,pins = "gpm4-2", "gpm4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	fimc_is_uart: fimc-is-uart-pins {
-		samsung,pins = "gpm3-5", "gpm3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	hdmi_cec: hdmi-cec-pins {
-		samsung,pins = "gpx3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_2 {
-	gpz: gpz-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	i2s0_bus: i2s0-bus-pins {
-		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-				"gpz-4", "gpz-5", "gpz-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm0_bus: pcm0-bus-pins {
-		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-				"gpz-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_3 {
-	gpv0: gpv0-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv1: gpv1-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv2: gpv2-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv3: gpv3-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv4: gpv4-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	c2c_bus: c2c-bus-pins {
-		samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
-				"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
-				"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
-				"gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7",
-				"gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
-				"gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
-				"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
-				"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
-				"gpv4-0", "gpv4-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
deleted file mode 100644
index aa0b61b59970..000000000000
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ /dev/null
@@ -1,821 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4412 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional
- * nodes can be added to this file.
- */
-
-#include "exynos4.dtsi"
-
-#include "exynos4-cpu-thermal.dtsi"
-
-/ {
-	compatible = "samsung,exynos4412", "samsung,exynos4";
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-		fimc-lite0 = &fimc_lite_0;
-		fimc-lite1 = &fimc_lite_1;
-		mshc0 = &mshc_0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&cpu0>;
-				};
-				core1 {
-					cpu = <&cpu1>;
-				};
-				core2 {
-					cpu = <&cpu2>;
-				};
-				core3 {
-					cpu = <&cpu3>;
-				};
-			};
-		};
-
-		cpu0: cpu@a00 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xA00>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu1: cpu@a01 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xA01>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu2: cpu@a02 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xA02>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu3: cpu@a03 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xA03>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
-	cpu0_opp_table: opp-table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <900000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <900000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <925000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <950000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <975000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-700000000 {
-			opp-hz = /bits/ 64 <700000000>;
-			opp-microvolt = <987500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1000000>;
-			clock-latency-ns = <200000>;
-			opp-suspend;
-		};
-		opp-900000000 {
-			opp-hz = /bits/ 64 <900000000>;
-			opp-microvolt = <1037500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1087500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1137500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1187500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1250000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1400000000 {
-			opp-hz = /bits/ 64 <1400000000>;
-			opp-microvolt = <1287500>;
-			clock-latency-ns = <200000>;
-		};
-		cpu0_opp_1500: opp-1500000000 {
-			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1350000>;
-			clock-latency-ns = <200000>;
-			turbo-mode;
-		};
-	};
-
-
-	soc: soc {
-
-		pinctrl_0: pinctrl@11400000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x11400000 0x1000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_1: pinctrl@11000000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x11000000 0x1000>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakup_eint: wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_2: pinctrl@3860000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x03860000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <10 0>;
-		};
-
-		pinctrl_3: pinctrl@106e0000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x106E0000 0x1000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		sram@2020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x40000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x40000>;
-
-			smp-sram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sram@2f000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x2f000 0x1000>;
-			};
-		};
-
-		pd_isp: power-domain@10023ca0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
-			#power-domain-cells = <0>;
-			label = "ISP";
-		};
-
-		l2c: cache-controller@10502000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x10502000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-			prefetch-data = <1>;
-			prefetch-instr = <1>;
-			arm,tag-latency = <2 2 1>;
-			arm,data-latency = <3 2 1>;
-			arm,double-linefill = <1>;
-			arm,double-linefill-incr = <0>;
-			arm,double-linefill-wrap = <1>;
-			arm,prefetch-drop = <1>;
-			arm,prefetch-offset = <7>;
-		};
-
-		clock: clock-controller@10030000 {
-			compatible = "samsung,exynos4412-clock";
-			reg = <0x10030000 0x18000>;
-			#clock-cells = <1>;
-		};
-
-		isp_clock: clock-controller@10048000 {
-			compatible = "samsung,exynos4412-isp-clock";
-			reg = <0x10048000 0x1000>;
-			#clock-cells = <1>;
-			power-domains = <&pd_isp>;
-			clocks = <&clock CLK_ACLK200>,
-				 <&clock CLK_ACLK400_MCUISP>;
-			clock-names = "aclk200", "aclk400_mcuisp";
-		};
-
-		timer@10050000 {
-			compatible = "samsung,exynos4412-mct";
-			reg = <0x10050000 0x800>;
-			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-			interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-					      <&combiner 12 5>,
-					      <&combiner 12 6>,
-					      <&combiner 12 7>,
-					      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		watchdog: watchdog@10060000 {
-			compatible = "samsung,exynos5250-wdt";
-			reg = <0x10060000 0x100>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_WDT>;
-			clock-names = "watchdog";
-			samsung,syscon-phandle = <&pmu_system_controller>;
-		};
-
-		adc: adc@126c0000 {
-			compatible = "samsung,exynos4212-adc";
-			reg = <0x126C0000 0x100>;
-			interrupt-parent = <&combiner>;
-			interrupts = <10 3>;
-			clocks = <&clock CLK_TSADC>;
-			clock-names = "adc";
-			#io-channel-cells = <1>;
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			status = "disabled";
-		};
-
-		g2d: g2d@10800000 {
-			compatible = "samsung,exynos4212-g2d";
-			reg = <0x10800000 0x1000>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
-			clock-names = "sclk_fimg2d", "fimg2d";
-			iommus = <&sysmmu_g2d>;
-		};
-
-		mshc_0: mmc@12550000 {
-			compatible = "samsung,exynos4412-dw-mshc";
-			reg = <0x12550000 0x1000>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			fifo-depth = <0x80>;
-			clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
-			clock-names = "biu", "ciu";
-			status = "disabled";
-		};
-
-		sysmmu_g2d: sysmmu@10a40000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A40000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 7>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_isp: sysmmu@12260000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12260000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 2>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_ISP>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_drc: sysmmu@12270000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12270000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 3>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_DRC>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_fd: sysmmu@122a0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x122A0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 4>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_FD>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_mcuctl: sysmmu@122b0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x122B0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 5>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_ISPCX>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_lite0: sysmmu@123b0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x123B0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 0>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu", "master";
-			clocks = <&isp_clock CLK_ISP_SMMU_LITE0>,
-				 <&isp_clock CLK_ISP_FIMC_LITE0>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_lite1: sysmmu@123c0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x123C0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 1>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu", "master";
-			clocks = <&isp_clock CLK_ISP_SMMU_LITE1>,
-				 <&isp_clock CLK_ISP_FIMC_LITE1>;
-			#iommu-cells = <0>;
-		};
-
-		bus_dmc: bus-dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			samsung,data-clock-ratio = <4>;
-			#interconnect-cells = <0>;
-			status = "disabled";
-		};
-
-		bus_acp: bus-acp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_ACP>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_acp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_c2c: bus-c2c {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_C2C>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_dmc_opp_table: opp-table1 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-				opp-microvolt = <950000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <1050000>;
-				opp-suspend;
-			};
-		};
-
-		bus_acp_opp_table: opp-table2 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-			};
-		};
-
-		bus_leftbus: bus-leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			interconnects = <&bus_dmc>;
-			#interconnect-cells = <0>;
-			status = "disabled";
-		};
-
-		bus_rightbus: bus-rightbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDR>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_display: bus-display {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_display_opp_table>;
-			interconnects = <&bus_leftbus &bus_dmc>;
-			#interconnect-cells = <0>;
-			status = "disabled";
-		};
-
-		bus_fsys: bus-fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK133>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_opp_table>;
-			status = "disabled";
-		};
-
-		bus_peri: bus-peri {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK100>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_peri_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mfc: bus-mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_SCLK_MFC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_leftbus_opp_table: opp-table3 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <925000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-				opp-microvolt = <950000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-microvolt = <1000000>;
-				opp-suspend;
-			};
-		};
-
-		bus_display_opp_table: opp-table4 {
-			compatible = "operating-points-v2";
-
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_fsys_opp_table: opp-table5 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-		};
-
-		bus_peri_opp_table: opp-table6 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
-	};
-};
-
-&combiner {
-	samsung,combiner-nr = <20>;
-	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&camera {
-	clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
-		 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
-	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
-
-	/* fimc_[0-3] are configured outside, under phandles */
-	fimc_lite_0: fimc-lite@12390000 {
-		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x12390000 0x1000>;
-		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd_isp>;
-		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
-		clock-names = "flite";
-		iommus = <&sysmmu_fimc_lite0>;
-		status = "disabled";
-	};
-
-	fimc_lite_1: fimc-lite@123a0000 {
-		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x123A0000 0x1000>;
-		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd_isp>;
-		clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
-		clock-names = "flite";
-		iommus = <&sysmmu_fimc_lite1>;
-		status = "disabled";
-	};
-
-	fimc_is: fimc-is@12000000 {
-		compatible = "samsung,exynos4212-fimc-is";
-		reg = <0x12000000 0x260000>;
-		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd_isp>;
-		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
-			 <&isp_clock CLK_ISP_FIMC_LITE1>,
-			 <&isp_clock CLK_ISP_PPMUISPX>,
-			 <&isp_clock CLK_ISP_PPMUISPMX>,
-			 <&isp_clock CLK_ISP_FIMC_ISP>,
-			 <&isp_clock CLK_ISP_FIMC_DRC>,
-			 <&isp_clock CLK_ISP_FIMC_FD>,
-			 <&isp_clock CLK_ISP_MCUISP>,
-			 <&isp_clock CLK_ISP_GICISP>,
-			 <&isp_clock CLK_ISP_MCUCTL_ISP>,
-			 <&isp_clock CLK_ISP_PWM_ISP>,
-			 <&isp_clock CLK_ISP_DIV_ISP0>,
-			 <&isp_clock CLK_ISP_DIV_ISP1>,
-			 <&isp_clock CLK_ISP_DIV_MCUISP0>,
-			 <&isp_clock CLK_ISP_DIV_MCUISP1>,
-			 <&clock CLK_MOUT_MPLL_USER_T>,
-			 <&clock CLK_ACLK200>,
-			 <&clock CLK_ACLK400_MCUISP>,
-			 <&clock CLK_DIV_ACLK200>,
-			 <&clock CLK_DIV_ACLK400_MCUISP>,
-			 <&clock CLK_UART_ISP_SCLK>;
-		clock-names = "lite0", "lite1", "ppmuispx",
-			      "ppmuispmx", "isp",
-			      "drc", "fd", "mcuisp",
-			      "gicisp", "mcuctl_isp", "pwm_isp",
-			      "ispdiv0", "ispdiv1", "mcuispdiv0",
-			      "mcuispdiv1", "mpll", "aclk200",
-			      "aclk400mcuisp", "div_aclk200",
-			      "div_aclk400mcuisp", "uart";
-		iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
-			 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
-		iommu-names = "isp", "drc", "fd", "mcuctl";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		status = "disabled";
-
-		pmu@10020000 {
-			reg = <0x10020000 0x3000>;
-		};
-
-		i2c1_isp: i2c-isp@12140000 {
-			compatible = "samsung,exynos4212-i2c-isp";
-			reg = <0x12140000 0x100>;
-			clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
-			clock-names = "i2c_isp";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&exynos_usbphy {
-	compatible = "samsung,exynos4x12-usb2-phy";
-	samsung,sysreg-phandle = <&sys_reg>;
-};
-
-&fimc_0 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,cam-if;
-};
-
-&fimc_1 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,cam-if;
-};
-
-&fimc_2 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,lcd-wb;
-	samsung,cam-if;
-};
-
-&fimc_3 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <1920 8192 1366 1920>;
-	samsung,rotators = <0>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,lcd-wb;
-};
-
-&gic {
-	cpu-offset = <0x4000>;
-};
-
-&gpu {
-	interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "gp",
-			  "gpmmu",
-			  "pp0",
-			  "ppmmu0",
-			  "pp1",
-			  "ppmmu1",
-			  "pp2",
-			  "ppmmu2",
-			  "pp3",
-			  "ppmmu3",
-			  "pmu";
-	operating-points-v2 = <&gpu_opp_table>;
-
-	gpu_opp_table: opp-table {
-		compatible = "operating-points-v2";
-
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-			opp-microvolt = <875000>;
-		};
-		opp-267000000 {
-			opp-hz = /bits/ 64 <267000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-350000000 {
-			opp-hz = /bits/ 64 <350000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-440000000 {
-			opp-hz = /bits/ 64 <440000000>;
-			opp-microvolt = <1025000>;
-		};
-	};
-};
-
-&hdmi {
-	compatible = "samsung,exynos4212-hdmi";
-};
-
-&jpeg_codec {
-	compatible = "samsung,exynos4212-jpeg";
-};
-
-&rotator {
-	compatible = "samsung,exynos4212-rotator";
-};
-
-&mixer {
-	compatible = "samsung,exynos4212-mixer";
-	clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
-	clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-		 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
-	interconnects = <&bus_display &bus_dmc>;
-};
-
-&pmu {
-	interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
-	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	status = "okay";
-};
-
-&pmu_system_controller {
-	compatible = "samsung,exynos4412-pmu", "syscon";
-	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
-			"clkout4", "clkout8", "clkout9";
-	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
-		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
-	#clock-cells = <1>;
-};
-
-&tmu {
-	compatible = "samsung,exynos4412-tmu";
-	interrupt-parent = <&combiner>;
-	interrupts = <2 4>;
-	reg = <0x100C0000 0x100>;
-	clocks = <&clock CLK_TMU_APBIF>;
-	clock-names = "tmu_apbif";
-	status = "disabled";
-};
-
-#include "exynos4412-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/gemini/Makefile b/arch/arm/boot/dts/gemini/Makefile
new file mode 100644
index 000000000000..f9f63ce3eb49
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_GEMINI) += \
+	gemini-dlink-dir-685.dtb \
+	gemini-dlink-dns-313.dtb \
+	gemini-nas4220b.dtb \
+	gemini-ns2502.dtb \
+	gemini-rut1xx.dtb \
+	gemini-sl93512r.dtb \
+	gemini-sq201.dtb \
+	gemini-ssi1328.dtb \
+	gemini-wbd111.dtb \
+	gemini-wbd222.dtb
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
index 396149664297..b4dbcf8f168e 100644
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
@@ -27,10 +27,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-esc {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			/* Collides with LPC_LAD[0], UART DCD, SSP 97RST */
 			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
@@ -187,7 +187,7 @@
 	};
 
 	/* This is a RealTek RTL8366RB switch and PHY using SMI over GPIO */
-	switch {
+	ethernet-switch {
 		compatible = "realtek,rtl8366rb";
 		/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
 		mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
@@ -204,36 +204,36 @@
 			#interrupt-cells = <1>;
 		};
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 				phy-handle = <&phy0>;
 			};
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan1";
 				phy-handle = <&phy1>;
 			};
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 				phy-handle = <&phy2>;
 			};
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan3";
 				phy-handle = <&phy3>;
 			};
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "wan";
 				phy-handle = <&phy4>;
 			};
-			rtl8366rb_cpu_port: port@5 {
+			rtl8366rb_cpu_port: ethernet-port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&gmac0>;
@@ -252,27 +252,27 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			phy0: phy@0 {
+			phy0: ethernet-phy@0 {
 				reg = <0>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <0>;
 			};
-			phy1: phy@1 {
+			phy1: ethernet-phy@1 {
 				reg = <1>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <1>;
 			};
-			phy2: phy@2 {
+			phy2: ethernet-phy@2 {
 				reg = <2>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <2>;
 			};
-			phy3: phy@3 {
+			phy3: ethernet-phy@3 {
 				reg = <3>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <3>;
 			};
-			phy4: phy@4 {
+			phy4: ethernet-phy@4 {
 				reg = <4>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <12>;
diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts
index eba1c94ed7f7..8c54d3a5a721 100644
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts
@@ -33,10 +33,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-esc {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
 		};
@@ -80,6 +80,15 @@
 		#cooling-cells = <2>;
 	};
 
+	/*
+	 * This is the type B USB connector on the device,
+	 * a GPIO-controlled USB VBUS detect
+	 */
+	usb1_phy: phy {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		#phy-cells = <0>;
+		vbus-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+	};
 
 	/* Global Mixed-Mode Technology G751 mounted on GPIO I2C */
 	i2c {
@@ -164,6 +173,8 @@
 			compatible = "cortina,gemini-flash", "jedec-flash";
 			status = "okay";
 			reg = <0x30000000 0x00080000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
 			/*
 			 * This "RedBoot" is the Storlink derivative.
@@ -300,5 +311,13 @@
 		ide@63000000 {
 			status = "okay";
 		};
+
+		usb@69000000 {
+			status = "okay";
+			dr_mode = "peripheral";
+			usb-phy = <&usb1_phy>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_default_pins>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini/gemini-nas4220b.dts
index 6544c730340f..6544c730340f 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini/gemini-nas4220b.dts
diff --git a/arch/arm/boot/dts/gemini-ns2502.dts b/arch/arm/boot/dts/gemini/gemini-ns2502.dts
index 704abd212df5..e6eeb35e8819 100644
--- a/arch/arm/boot/dts/gemini-ns2502.dts
+++ b/arch/arm/boot/dts/gemini/gemini-ns2502.dts
@@ -39,10 +39,6 @@
 		phy0: ethernet-phy@1 {
 			reg = <1>;
 			device_type = "ethernet-phy";
-			/* We lack the knowledge of necessary GPIO to achieve
-			 * Gigabit
-			 */
-			max-speed = <100>;
 		};
 	};
 };
@@ -50,7 +46,7 @@
 &ethernet {
 	status = "okay";
 	ethernet-port@0 {
-		phy-mode = "rgmii";
+		phy-mode = "rgmii-id";
 		phy-handle = <&phy0>;
 	};
 };
@@ -65,30 +61,9 @@
 	pinctrl-1 = <&pflash_disabled_pins>;
 
 	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "RedBoot";
-			reg = <0x00000000 0x00020000>;
-		};
-		partition@20000 {
-			label = "kernel";
-			reg = <0x00020000 0x00700000>;
-		};
-		partition@720000 {
-			label = "VCTL";
-			reg = <0x00720000 0x00020000>;
-		};
-		partition@740000 {
-			label = "CurConf";
-			reg = <0x00740000 0x000a0000>;
-		};
-		partition@7e0000 {
-			label = "FIS";
-			reg = <0x007e0000 0x00010000>;
-		};
+		compatible = "redboot-fis";
+		/* Eraseblock at 0x7e0000 */
+		fis-index-block = <0x3f>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini/gemini-rut1xx.dts
index 0ebda4efd9d0..0ebda4efd9d0 100644
--- a/arch/arm/boot/dts/gemini-rut1xx.dts
+++ b/arch/arm/boot/dts/gemini/gemini-rut1xx.dts
diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
index 91c19e8ebfe8..4992ec276de9 100644
--- a/arch/arm/boot/dts/gemini-sl93512r.dts
+++ b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
@@ -43,7 +43,7 @@
 		button-setup {
 			debounce-interval = <50>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "factory reset";
 			/* Conflict with NAND flash */
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
@@ -93,7 +93,7 @@
 		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
-		switch@0 {
+		ethernet-switch@0 {
 			compatible = "vitesse,vsc7385";
 			reg = <0>;
 			/* Specified for 2.5 MHz or below */
@@ -101,27 +101,27 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					label = "lan1";
 				};
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "lan2";
 				};
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "lan3";
 				};
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "lan4";
 				};
-				vsc: port@6 {
+				vsc: ethernet-port@6 {
 					reg = <6>;
 					label = "cpu";
 					ethernet = <&gmac1>;
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini/gemini-sq201.dts
index d0efd76695da..f8c6f6e5cdea 100644
--- a/arch/arm/boot/dts/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini/gemini-sq201.dts
@@ -30,7 +30,7 @@
 		button-setup {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "factory reset";
 			/* Conflict with NAND flash */
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
@@ -78,7 +78,7 @@
 		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
-		switch@0 {
+		ethernet-switch@0 {
 			compatible = "vitesse,vsc7395";
 			reg = <0>;
 			/* Specified for 2.5 MHz or below */
@@ -86,27 +86,27 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					label = "lan1";
 				};
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "lan2";
 				};
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "lan3";
 				};
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "lan4";
 				};
-				vsc: port@6 {
+				vsc: ethernet-port@6 {
 					reg = <6>;
 					label = "cpu";
 					ethernet = <&gmac1>;
diff --git a/arch/arm/boot/dts/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini/gemini-ssi1328.dts
index 2b3e7db84fed..42e85f07cf76 100644
--- a/arch/arm/boot/dts/gemini-ssi1328.dts
+++ b/arch/arm/boot/dts/gemini/gemini-ssi1328.dts
@@ -40,10 +40,6 @@
 		phy0: ethernet-phy@1 {
 			reg = <1>;
 			device_type = "ethernet-phy";
-			/* We lack the knowledge of necessary GPIO to achieve
-			 * Gigabit
-			 */
-			max-speed = <100>;
 		};
 		/* WAN ICPlus IP101A */
 		phy1: ethernet-phy@2 {
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini/gemini-wbd111.dts
index de3c4416b0fb..6a0c89e0c918 100644
--- a/arch/arm/boot/dts/gemini-wbd111.dts
+++ b/arch/arm/boot/dts/gemini/gemini-wbd111.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "Wiliboard WBD-111";
-	compatible = "wiliboard,wbd111", "cortina,gemini";
+	compatible = "wiligear,wiliboard-wbd111", "cortina,gemini";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -28,10 +28,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-setup {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			/* Conflict with ICE */
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
@@ -87,33 +87,10 @@
 			/* 8MB of flash */
 			reg = <0x30000000 0x00800000>;
 
-			partition@0 {
-				label = "RedBoot";
-				reg = <0x00000000 0x00020000>;
-				read-only;
-			};
-			partition@20000 {
-				label = "kernel";
-				reg = <0x00020000 0x00100000>;
-			};
-			partition@120000 {
-				label = "rootfs";
-				reg = <0x00120000 0x006a0000>;
-			};
-			partition@7c0000 {
-				label = "VCTL";
-				reg = <0x007c0000 0x00010000>;
-				read-only;
-			};
-			partition@7d0000 {
-				label = "cfg";
-				reg = <0x007d0000 0x00010000>;
-				read-only;
-			};
-			partition@7e0000 {
-				label = "FIS";
-				reg = <0x007e0000 0x00010000>;
-				read-only;
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0x7e0000 */
+				fis-index-block = <0x3f>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini/gemini-wbd222.dts
index e5ceaadbcc1a..d8b34ebad4b0 100644
--- a/arch/arm/boot/dts/gemini-wbd222.dts
+++ b/arch/arm/boot/dts/gemini/gemini-wbd222.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "Wiliboard WBD-222";
-	compatible = "wiliboard,wbd222", "cortina,gemini";
+	compatible = "wiligear,wiliboard-wbd222", "cortina,gemini";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -27,10 +27,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-setup {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			/* Conflict with ICE */
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
@@ -91,33 +91,10 @@
 			/* 8MB of flash */
 			reg = <0x30000000 0x00800000>;
 
-			partition@0 {
-				label = "RedBoot";
-				reg = <0x00000000 0x00020000>;
-				read-only;
-			};
-			partition@20000 {
-				label = "kernel";
-				reg = <0x00020000 0x00100000>;
-			};
-			partition@120000 {
-				label = "rootfs";
-				reg = <0x00120000 0x006a0000>;
-			};
-			partition@7c0000 {
-				label = "VCTL";
-				reg = <0x007c0000 0x00010000>;
-				read-only;
-			};
-			partition@7d0000 {
-				label = "cfg";
-				reg = <0x007d0000 0x00010000>;
-				read-only;
-			};
-			partition@7e0000 {
-				label = "FIS";
-				reg = <0x007e0000 0x00010000>;
-				read-only;
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0x7e0000 */
+				fis-index-block = <0x3f>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini/gemini.dtsi
index e836bd0818d4..befe322bd7de 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini/gemini.dtsi
@@ -22,8 +22,6 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pflash_default_pins>;
 			bank-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
 			status = "disabled";
 		};
 
@@ -441,7 +439,7 @@
 		};
 
 		usb0: usb@68000000 {
-			compatible = "cortina,gemini-usb", "faraday,fotg210";
+			compatible = "cortina,gemini-usb", "faraday,fotg200";
 			reg = <0x68000000 0x1000>;
 			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&syscon GEMINI_RESET_USB0>;
@@ -457,12 +455,14 @@
 			 */
 			pinctrl-names = "default";
 			pinctrl-0 = <&usb_default_pins>;
+			/* Default to host mode */
+			dr_mode = "host";
 			syscon = <&syscon>;
 			status = "disabled";
 		};
 
 		usb1: usb@69000000 {
-			compatible = "cortina,gemini-usb", "faraday,fotg210";
+			compatible = "cortina,gemini-usb", "faraday,fotg200";
 			reg = <0x69000000 0x1000>;
 			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&syscon GEMINI_RESET_USB1>;
diff --git a/arch/arm/boot/dts/hisilicon/Makefile b/arch/arm/boot/dts/hisilicon/Makefile
new file mode 100644
index 000000000000..5ce0512c0010
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_HI3xxx) += \
+	hi3620-hi4511.dtb
+dtb-$(CONFIG_ARCH_HIP01) += \
+	hip01-ca9x2.dtb
+dtb-$(CONFIG_ARCH_HIP04) += \
+	hip04-d01.dtb
+dtb-$(CONFIG_ARCH_HISI) += \
+	hi3519-demb.dtb
+dtb-$(CONFIG_ARCH_HIX5HD2) += \
+	hisi-x5hd2-dkb.dtb
+dtb-$(CONFIG_ARCH_SD5203) += \
+	sd5203.dtb
diff --git a/arch/arm/boot/dts/hi3519-demb.dts b/arch/arm/boot/dts/hisilicon/hi3519-demb.dts
index f473fa22e9ce..f473fa22e9ce 100644
--- a/arch/arm/boot/dts/hi3519-demb.dts
+++ b/arch/arm/boot/dts/hisilicon/hi3519-demb.dts
diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
index c524c854d319..a42b71cdc5d7 100644
--- a/arch/arm/boot/dts/hi3519.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
@@ -54,7 +54,7 @@
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart1: serial@12101000 {
@@ -63,7 +63,7 @@
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart2: serial@12102000 {
@@ -72,7 +72,7 @@
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart3: serial@12103000 {
@@ -81,7 +81,7 @@
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart4: serial@12104000 {
@@ -90,7 +90,7 @@
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer0: timer@12000000 {
@@ -100,7 +100,7 @@
 			reg = <0x12000000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer1: timer@12001000 {
@@ -110,7 +110,7 @@
 			reg = <0x12001000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer2: timer@12002000 {
@@ -120,7 +120,7 @@
 			reg = <0x12002000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus0: spi@12120000 {
@@ -132,7 +132,7 @@
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus1: spi@12121000 {
@@ -144,7 +144,7 @@
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus2: spi@12122000 {
@@ -156,7 +156,7 @@
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		sysctrl: system-controller@12020000 {
diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hisilicon/hi3620-hi4511.dts
index ce356c469e1e..f1c816a1d7cf 100644
--- a/arch/arm/boot/dts/hi3620-hi4511.dts
+++ b/arch/arm/boot/dts/hisilicon/hi3620-hi4511.dts
@@ -24,161 +24,161 @@
 
 	amba-bus {
 		dual_timer0: dual_timer@800000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		uart0: serial@b00000 {	/* console */
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
 			pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
 		uart1: serial@b01000 { /* modem */
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
 			pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
 		uart2: serial@b02000 { /* audience */
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
 			pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
 		uart3: serial@b03000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
 			pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
 		uart4: serial@b04000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
 			pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
-			status = "ok";
+			status = "okay";
 		};
 
 		pmx0: pinmux@803000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&board_pmx_pins>;
 
-			board_pmx_pins: board_pmx_pins {
+			board_pmx_pins: board-pins {
 				pinctrl-single,pins = <
 					0x008 0x0	/* GPIO -- eFUSE_DOUT */
 					0x100 0x0	/* USIM_CLK & USIM_DATA (IOMG63) */
 				>;
 			};
-			uart0_pmx_func: uart0_pmx_func {
+			uart0_pmx_func: uart0-pins {
 				pinctrl-single,pins = <
 					0x0f0 0x0
 					0x0f4 0x0	/* UART0_RX & UART0_TX */
 				>;
 			};
-			uart0_pmx_idle: uart0_pmx_idle {
+			uart0_pmx_idle: uart0-idle-pins {
 				pinctrl-single,pins = <
 					/*0x0f0 0x1*/	/* UART0_CTS & UART0_RTS */
 					0x0f4 0x1	/* UART0_RX & UART0_TX */
 				>;
 			};
-			uart1_pmx_func: uart1_pmx_func {
+			uart1_pmx_func: uart1-pins {
 				pinctrl-single,pins = <
 					0x0f8 0x0	/* UART1_CTS & UART1_RTS (IOMG61) */
 					0x0fc 0x0	/* UART1_RX & UART1_TX (IOMG62) */
 				>;
 			};
-			uart1_pmx_idle: uart1_pmx_idle {
+			uart1_pmx_idle: uart1-idle-pins {
 				pinctrl-single,pins = <
 					0x0f8 0x1	/* GPIO (IOMG61) */
 					0x0fc 0x1	/* GPIO (IOMG62) */
 				>;
 			};
-			uart2_pmx_func: uart2_pmx_func {
+			uart2_pmx_func: uart2-pins {
 				pinctrl-single,pins = <
 					0x104 0x2	/* UART2_RXD (IOMG96) */
 					0x108 0x2	/* UART2_TXD (IOMG64) */
 				>;
 			};
-			uart2_pmx_idle: uart2_pmx_idle {
+			uart2_pmx_idle: uart2-idle-pins {
 				pinctrl-single,pins = <
 					0x104 0x1	/* GPIO (IOMG96) */
 					0x108 0x1	/* GPIO (IOMG64) */
 				>;
 			};
-			uart3_pmx_func: uart3_pmx_func {
+			uart3_pmx_func: uart3-pins {
 				pinctrl-single,pins = <
 					0x160 0x2	/* UART3_CTS & UART3_RTS (IOMG85) */
 					0x164 0x2	/* UART3_RXD & UART3_TXD (IOMG86) */
 				>;
 			};
-			uart3_pmx_idle: uart3_pmx_idle {
+			uart3_pmx_idle: uart3-idle-pins {
 				pinctrl-single,pins = <
 					0x160 0x1	/* GPIO (IOMG85) */
 					0x164 0x1	/* GPIO (IOMG86) */
 				>;
 			};
-			uart4_pmx_func: uart4_pmx_func {
+			uart4_pmx_func: uart4-pins {
 				pinctrl-single,pins = <
 					0x168 0x0	/* UART4_CTS & UART4_RTS (IOMG87) */
 					0x16c 0x0	/* UART4_RXD (IOMG88) */
 					0x170 0x0	/* UART4_TXD (IOMG93) */
 				>;
 			};
-			uart4_pmx_idle: uart4_pmx_idle {
+			uart4_pmx_idle: uart4-idle-pins {
 				pinctrl-single,pins = <
 					0x168 0x1	/* GPIO (IOMG87) */
 					0x16c 0x1	/* GPIO (IOMG88) */
 					0x170 0x1	/* GPIO (IOMG93) */
 				>;
 			};
-			i2c0_pmx_func: i2c0_pmx_func {
+			i2c0_pmx_func: i2c0-pins {
 				pinctrl-single,pins = <
 					0x0b4 0x0	/* I2C0_SCL & I2C0_SDA (IOMG45) */
 				>;
 			};
-			i2c0_pmx_idle: i2c0_pmx_idle {
+			i2c0_pmx_idle: i2c0-idle-pins {
 				pinctrl-single,pins = <
 					0x0b4 0x1	/* GPIO (IOMG45) */
 				>;
 			};
-			i2c1_pmx_func: i2c1_pmx_func {
+			i2c1_pmx_func: i2c1-pins {
 				pinctrl-single,pins = <
 					0x0b8 0x0	/* I2C1_SCL & I2C1_SDA (IOMG46) */
 				>;
 			};
-			i2c1_pmx_idle: i2c1_pmx_idle {
+			i2c1_pmx_idle: i2c1-idle-pins {
 				pinctrl-single,pins = <
 					0x0b8 0x1	/* GPIO (IOMG46) */
 				>;
 			};
-			i2c2_pmx_func: i2c2_pmx_func {
+			i2c2_pmx_func: i2c2-pins {
 				pinctrl-single,pins = <
 					0x068 0x0	/* I2C2_SCL (IOMG26) */
 					0x06c 0x0	/* I2C2_SDA (IOMG27) */
 				>;
 			};
-			i2c2_pmx_idle: i2c2_pmx_idle {
+			i2c2_pmx_idle: i2c2-idle-pins {
 				pinctrl-single,pins = <
 					0x068 0x1	/* GPIO (IOMG26) */
 					0x06c 0x1	/* GPIO (IOMG27) */
 				>;
 			};
-			i2c3_pmx_func: i2c3_pmx_func {
+			i2c3_pmx_func: i2c3-pins {
 				pinctrl-single,pins = <
 					0x050 0x2	/* I2C3_SCL (IOMG20) */
 					0x054 0x2	/* I2C3_SDA (IOMG21) */
 				>;
 			};
-			i2c3_pmx_idle: i2c3_pmx_idle {
+			i2c3_pmx_idle: i2c3-idle-pins {
 				pinctrl-single,pins = <
 					0x050 0x1	/* GPIO (IOMG20) */
 					0x054 0x1	/* GPIO (IOMG21) */
 				>;
 			};
-			spi0_pmx_func: spi0_pmx_func {
+			spi0_pmx_func: spi0-pins {
 				pinctrl-single,pins = <
 					0x0d4 0x0	/* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */
 					0x0d8 0x0	/* SPI0_CS0 (IOMG54) */
@@ -187,7 +187,7 @@
 					0x0e4 0x0	/* SPI0_CS3 (IOMG57) */
 				>;
 			};
-			spi0_pmx_idle: spi0_pmx_idle {
+			spi0_pmx_idle: spi0-idle-pins {
 				pinctrl-single,pins = <
 					0x0d4 0x1	/* GPIO (IOMG53) */
 					0x0d8 0x1	/* GPIO (IOMG54) */
@@ -196,21 +196,21 @@
 					0x0e4 0x1	/* GPIO (IOMG57) */
 				>;
 			};
-			spi1_pmx_func: spi1_pmx_func {
+			spi1_pmx_func: spi1-pins {
 				pinctrl-single,pins = <
 					0x184 0x0	/* SPI1_CLK/SPI1_DI (IOMG98) */
 					0x0e8 0x0	/* SPI1_DO (IOMG58) */
 					0x0ec 0x0	/* SPI1_CS (IOMG95) */
 				>;
 			};
-			spi1_pmx_idle: spi1_pmx_idle {
+			spi1_pmx_idle: spi1-idle-pins {
 				pinctrl-single,pins = <
 					0x184 0x1	/* GPIO (IOMG98) */
 					0x0e8 0x1	/* GPIO (IOMG58) */
 					0x0ec 0x1	/* GPIO (IOMG95) */
 				>;
 			};
-			kpc_pmx_func: kpc_pmx_func {
+			kpc_pmx_func: kpc-pins {
 				pinctrl-single,pins = <
 					0x12c 0x0	/* KEY_IN0 (IOMG73) */
 					0x130 0x0	/* KEY_IN1 (IOMG74) */
@@ -220,7 +220,7 @@
 					0x114 0x0	/* KEY_OUT2 (IOMG67) */
 				>;
 			};
-			kpc_pmx_idle: kpc_pmx_idle {
+			kpc_pmx_idle: kpc-idle-pins {
 				pinctrl-single,pins = <
 					0x12c 0x1	/* GPIO (IOMG73) */
 					0x130 0x1	/* GPIO (IOMG74) */
@@ -230,13 +230,13 @@
 					0x114 0x1	/* GPIO (IOMG67) */
 				>;
 			};
-			gpio_key_func: gpio_key_func {
+			gpio_key_func: gpio-key-pins {
 				pinctrl-single,pins = <
 					0x10c 0x1	/* KEY_OUT0/GPIO (IOMG65) */
 					0x130 0x1	/* KEY_IN1/GPIO (IOMG74) */
 				>;
 			};
-			emmc_pmx_func: emmc_pmx_func {
+			emmc_pmx_func: emmc-pins {
 				pinctrl-single,pins = <
 					0x030 0x2	/* eMMC_CMD/eMMC_CLK (IOMG12) */
 					0x018 0x0	/* NAND_CS3_N (IOMG6) */
@@ -245,7 +245,7 @@
 					0x02c 0x2	/* eMMC_DATA[0:7] (IOMG10) */
 				>;
 			};
-			emmc_pmx_idle: emmc_pmx_idle {
+			emmc_pmx_idle: emmc-idle-pins {
 				pinctrl-single,pins = <
 					0x030 0x0	/* GPIO (IOMG12) */
 					0x018 0x1	/* GPIO (IOMG6) */
@@ -254,19 +254,19 @@
 					0x02c 0x1	/* GPIO (IOMG10) */
 				>;
 			};
-			sd_pmx_func: sd_pmx_func {
+			sd_pmx_func: sd-pins {
 				pinctrl-single,pins = <
 					0x0bc 0x0	/* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */
 					0x0c0 0x0	/* SD_DATA3 (IOMG48) */
 				>;
 			};
-			sd_pmx_idle: sd_pmx_idle {
+			sd_pmx_idle: sd-idle-pins {
 				pinctrl-single,pins = <
 					0x0bc 0x1	/* GPIO (IOMG47) */
 					0x0c0 0x1	/* GPIO (IOMG48) */
 				>;
 			};
-			nand_pmx_func: nand_pmx_func {
+			nand_pmx_func: nand-pins {
 				pinctrl-single,pins = <
 					0x00c 0x0	/* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */
 					0x010 0x0	/* NAND_CS1_N (IOMG4) */
@@ -279,7 +279,7 @@
 					0x02c 0x0	/* NAND_DATA[8:15] (IOMG10) */
 				>;
 			};
-			nand_pmx_idle: nand_pmx_idle {
+			nand_pmx_idle: nand-idle-pins {
 				pinctrl-single,pins = <
 					0x00c 0x1	/* GPIO (IOMG3) */
 					0x010 0x1	/* GPIO (IOMG4) */
@@ -292,17 +292,17 @@
 					0x02c 0x1	/* GPIO (IOMG10) */
 				>;
 			};
-			sdio_pmx_func: sdio_pmx_func {
+			sdio_pmx_func: sdio-pins {
 				pinctrl-single,pins = <
 					0x0c4 0x0	/* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */
 				>;
 			};
-			sdio_pmx_idle: sdio_pmx_idle {
+			sdio_pmx_idle: sdio-idle-pins {
 				pinctrl-single,pins = <
 					0x0c4 0x1	/* GPIO (IOMG49) */
 				>;
 			};
-			audio_out_pmx_func: audio_out_pmx_func {
+			audio_out_pmx_func: audio-out-pins {
 				pinctrl-single,pins = <
 					0x0f0 0x1	/* GPIO (IOMG59), audio spk & earphone */
 				>;
@@ -314,7 +314,7 @@
 			pinctrl-0 = <	&board_pu_pins &board_pd_pins &board_pd_ps_pins
 					&board_np_pins &board_ps_pins &kpc_cfg_func
 					&audio_out_cfg_func>;
-			board_pu_pins: board_pu_pins {
+			board_pu_pins: board-pu-pins {
 				pinctrl-single,pins = <
 					0x014 0		/* GPIO_158 (IOCFG2) */
 					0x018 0		/* GPIO_159 (IOCFG3) */
@@ -324,7 +324,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 			};
-			board_pd_pins: board_pd_pins {
+			board_pd_pins: board-pd-pins {
 				pinctrl-single,pins = <
 					0x038 0		/* eFUSE_DOUT (IOCFG11) */
 					0x150 0		/* ISP_GPIO8 (IOCFG93) */
@@ -333,7 +333,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			board_pd_ps_pins: board_pd_ps_pins {
+			board_pd_ps_pins: board-pd-ps-pins {
 				pinctrl-single,pins = <
 					0x2d8 0		/* CLK_OUT0 (IOCFG190) */
 					0x004 0		/* PMU_SPI_DATA (IOCFG192) */
@@ -342,21 +342,21 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			board_np_pins: board_np_pins {
+			board_np_pins: board-np-pins {
 				pinctrl-single,pins = <
 					0x24c 0		/* KEYPAD_OUT7 (IOCFG155) */
 				>;
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			board_ps_pins: board_ps_pins {
+			board_ps_pins: board-ps-pins {
 				pinctrl-single,pins = <
 					0x000 0		/* PMU_SPI_CLK (IOCFG191) */
 					0x008 0		/* PMU_SPI_CS_N (IOCFG193) */
 				>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			uart0_cfg_func: uart0_cfg_func {
+			uart0_cfg_func: uart0-cfg-pins {
 				pinctrl-single,pins = <
 					0x208 0		/* UART0_RXD (IOCFG138) */
 					0x20c 0		/* UART0_TXD (IOCFG139) */
@@ -364,7 +364,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart0_cfg_idle: uart0_cfg_idle {
+			uart0_cfg_idle: uart0-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x208 0		/* UART0_RXD (IOCFG138) */
 					0x20c 0		/* UART0_TXD (IOCFG139) */
@@ -372,7 +372,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart1_cfg_func: uart1_cfg_func {
+			uart1_cfg_func: uart1-cfg-pins {
 				pinctrl-single,pins = <
 					0x210 0		/* UART1_CTS (IOCFG140) */
 					0x214 0		/* UART1_RTS (IOCFG141) */
@@ -382,7 +382,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart1_cfg_idle: uart1_cfg_idle {
+			uart1_cfg_idle: uart1-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x210 0		/* UART1_CTS (IOCFG140) */
 					0x214 0		/* UART1_RTS (IOCFG141) */
@@ -392,7 +392,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart2_cfg_func: uart2_cfg_func {
+			uart2_cfg_func: uart2-cfg-pins {
 				pinctrl-single,pins = <
 					0x220 0		/* UART2_CTS (IOCFG144) */
 					0x224 0		/* UART2_RTS (IOCFG145) */
@@ -402,7 +402,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart2_cfg_idle: uart2_cfg_idle {
+			uart2_cfg_idle: uart2-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x220 0		/* GPIO (IOCFG144) */
 					0x224 0		/* GPIO (IOCFG145) */
@@ -412,7 +412,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart3_cfg_func: uart3_cfg_func {
+			uart3_cfg_func: uart3-cfg-pins {
 				pinctrl-single,pins = <
 					0x294 0		/* UART3_CTS (IOCFG173) */
 					0x298 0		/* UART3_RTS (IOCFG174) */
@@ -422,7 +422,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart3_cfg_idle: uart3_cfg_idle {
+			uart3_cfg_idle: uart3-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x294 0		/* UART3_CTS (IOCFG173) */
 					0x298 0		/* UART3_RTS (IOCFG174) */
@@ -432,7 +432,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart4_cfg_func: uart4_cfg_func {
+			uart4_cfg_func: uart4-cfg-pins {
 				pinctrl-single,pins = <
 					0x2a4 0		/* UART4_CTS (IOCFG177) */
 					0x2a8 0		/* UART4_RTS (IOCFG178) */
@@ -442,7 +442,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			i2c0_cfg_func: i2c0_cfg_func {
+			i2c0_cfg_func: i2c0-cfg-pins {
 				pinctrl-single,pins = <
 					0x17c 0		/* I2C0_SCL (IOCFG103) */
 					0x180 0		/* I2C0_SDA (IOCFG104) */
@@ -451,7 +451,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			i2c1_cfg_func: i2c1_cfg_func {
+			i2c1_cfg_func: i2c1-cfg-pins {
 				pinctrl-single,pins = <
 					0x184 0		/* I2C1_SCL (IOCFG105) */
 					0x188 0		/* I2C1_SDA (IOCFG106) */
@@ -460,7 +460,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			i2c2_cfg_func: i2c2_cfg_func {
+			i2c2_cfg_func: i2c2-cfg-pins {
 				pinctrl-single,pins = <
 					0x118 0		/* I2C2_SCL (IOCFG79) */
 					0x11c 0		/* I2C2_SDA (IOCFG80) */
@@ -469,7 +469,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			i2c3_cfg_func: i2c3_cfg_func {
+			i2c3_cfg_func: i2c3-cfg-pins {
 				pinctrl-single,pins = <
 					0x100 0		/* I2C3_SCL (IOCFG73) */
 					0x104 0		/* I2C3_SDA (IOCFG74) */
@@ -478,7 +478,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			spi0_cfg_func1: spi0_cfg_func1 {
+			spi0_cfg_func1: spi0-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0x1d4 0		/* SPI0_CLK (IOCFG125) */
 					0x1d8 0		/* SPI0_DI (IOCFG126) */
@@ -488,7 +488,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			spi0_cfg_func2: spi0_cfg_func2 {
+			spi0_cfg_func2: spi0-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0x1e0 0		/* SPI0_CS0 (IOCFG128) */
 					0x1e4 0		/* SPI0_CS1 (IOCFG129) */
@@ -499,7 +499,7 @@
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			spi1_cfg_func1: spi1_cfg_func1 {
+			spi1_cfg_func1: spi1-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0x1f0 0		/* SPI1_CLK (IOCFG132) */
 					0x1f4 0		/* SPI1_DI (IOCFG133) */
@@ -509,7 +509,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			spi1_cfg_func2: spi1_cfg_func2 {
+			spi1_cfg_func2: spi1-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0x1fc 0		/* SPI1_CS (IOCFG135) */
 				>;
@@ -517,7 +517,7 @@
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			kpc_cfg_func: kpc_cfg_func {
+			kpc_cfg_func: kpc-cfg-pins {
 				pinctrl-single,pins = <
 					0x250 0		/* KEY_IN0 (IOCFG156) */
 					0x254 0		/* KEY_IN1 (IOCFG157) */
@@ -529,7 +529,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			emmc_cfg_func: emmc_cfg_func {
+			emmc_cfg_func: emmc-cfg-pins {
 				pinctrl-single,pins = <
 					0x0ac 0		/* eMMC_CMD (IOCFG40) */
 					0x0b0 0		/* eMMC_CLK (IOCFG41) */
@@ -549,7 +549,7 @@
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			sd_cfg_func1: sd_cfg_func1 {
+			sd_cfg_func1: sd-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0x18c 0		/* SD_CLK (IOCFG107) */
 					0x190 0		/* SD_CMD (IOCFG108) */
@@ -558,7 +558,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			sd_cfg_func2: sd_cfg_func2 {
+			sd_cfg_func2: sd-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0x194 0		/* SD_DATA0 (IOCFG109) */
 					0x198 0		/* SD_DATA1 (IOCFG110) */
@@ -569,7 +569,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x70 0xf0>;
 			};
-			nand_cfg_func1: nand_cfg_func1 {
+			nand_cfg_func1: nand-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0x03c 0		/* NAND_ALE (IOCFG12) */
 					0x040 0		/* NAND_CLE (IOCFG13) */
@@ -594,7 +594,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			nand_cfg_func2: nand_cfg_func2 {
+			nand_cfg_func2: nand-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0x044 0		/* NAND_RE_N (IOCFG14) */
 					0x048 0		/* NAND_WE_N (IOCFG15) */
@@ -611,7 +611,7 @@
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			sdio_cfg_func: sdio_cfg_func {
+			sdio_cfg_func: sdio-cfg-pins {
 				pinctrl-single,pins = <
 					0x1a4 0		/* SDIO0_CLK (IOCG113) */
 					0x1a8 0		/* SDIO0_CMD (IOCG114) */
@@ -624,7 +624,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			audio_out_cfg_func: audio_out_cfg_func {
+			audio_out_cfg_func: audio-out-cfg-pins {
 				pinctrl-single,pins = <
 					0x200 0		/* GPIO (IOCFG136) */
 					0x204 0		/* GPIO (IOCFG137) */
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hisilicon/hi3620.dtsi
index cf48ec14af43..a254ec009296 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hi3620.dtsi
@@ -545,10 +545,9 @@
 			compatible = "pinctrl-single";
 			reg = <0x803000 0x188>;
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			#pinctrl-cells = <1>;
 			#gpio-range-cells = <3>;
-			ranges;
 
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <7>;
@@ -567,9 +566,8 @@
 			compatible = "pinconf-single";
 			reg = <0x803800 0x2dc>;
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			#pinctrl-cells = <1>;
-			ranges;
 
 			pinctrl-single,register-width = <32>;
 		};
diff --git a/arch/arm/boot/dts/hip01-ca9x2.dts b/arch/arm/boot/dts/hisilicon/hip01-ca9x2.dts
index f3faf247cd61..f3faf247cd61 100644
--- a/arch/arm/boot/dts/hip01-ca9x2.dts
+++ b/arch/arm/boot/dts/hisilicon/hip01-ca9x2.dts
diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hisilicon/hip01.dtsi
index e17f36bd9006..e17f36bd9006 100644
--- a/arch/arm/boot/dts/hip01.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hip01.dtsi
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hisilicon/hip04-d01.dts
index f5691dbc26d2..0210064bf6a5 100644
--- a/arch/arm/boot/dts/hip04-d01.dts
+++ b/arch/arm/boot/dts/hisilicon/hip04-d01.dts
@@ -23,7 +23,7 @@
 
 	soc {
 		uart0: serial@4007000 {
-			status = "ok";
+			status = "okay";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hisilicon/hip04.dtsi
index 2424cc545c9c..2424cc545c9c 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hip04.dtsi
diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisilicon/hisi-x5hd2-dkb.dts
index 7758c19038f0..7758c19038f0 100644
--- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
+++ b/arch/arm/boot/dts/hisilicon/hisi-x5hd2-dkb.dts
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisilicon/hisi-x5hd2.dtsi
index dc991ba2a9fb..dc991ba2a9fb 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hisi-x5hd2.dtsi
diff --git a/arch/arm/boot/dts/sd5203.dts b/arch/arm/boot/dts/hisilicon/sd5203.dts
index 69381819e07b..69381819e07b 100644
--- a/arch/arm/boot/dts/sd5203.dts
+++ b/arch/arm/boot/dts/hisilicon/sd5203.dts
diff --git a/arch/arm/boot/dts/hpe/Makefile b/arch/arm/boot/dts/hpe/Makefile
new file mode 100644
index 000000000000..e175b1732cdb
--- /dev/null
+++ b/arch/arm/boot/dts/hpe/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_HPE_GXP) += \
+	hpe-bmc-dl360gen10.dtb
diff --git a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe/hpe-bmc-dl360gen10.dts
index 3a7382ce40ef..3a7382ce40ef 100644
--- a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
+++ b/arch/arm/boot/dts/hpe/hpe-bmc-dl360gen10.dts
diff --git a/arch/arm/boot/dts/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe/hpe-gxp.dtsi
index cf735b3c4f35..cf735b3c4f35 100644
--- a/arch/arm/boot/dts/hpe-gxp.dtsi
+++ b/arch/arm/boot/dts/hpe/hpe-gxp.dtsi
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
deleted file mode 100644
index 7d4301b22b90..000000000000
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-#include "imx25-eukrea-mbimxsd25-baseboard.dts"
-
-/ {
-	model = "Eukrea MBIMXSD25 with the CMO-QVGA Display";
-	compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	cmo_qvga: display {
-		model = "CMO-QVGA";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xcad08b80>;
-		bus-width = <18>;
-		display-timings {
-			native-mode = <&qvga_timings>;
-			qvga_timings: 320x240 {
-				clock-frequency = <6500000>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <30>;
-				hfront-porch = <38>;
-				vback-porch = <20>;
-				vfront-porch = <3>;
-				hsync-len = <15>;
-				vsync-len = <4>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_lcd_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-};
-
-&iomuxc {
-	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga {
-		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
-			fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
-		};
-	};
-};
-
-&lcdc {
-	display = <&cmo_qvga>;
-	fsl,lpccr = <0x00a903ff>;
-	lcd-supply = <&reg_lcd_3v3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts
deleted file mode 100644
index 0950eb66d3d9..000000000000
--- a/arch/arm/boot/dts/imx25-karo-tx25.dts
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- */
-
-/dts-v1/;
-#include "imx25.dtsi"
-
-/ {
-	model = "Ka-Ro TX25";
-	compatible = "karo,imx25-tx25", "fsl,imx25";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_fec_phy: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "fec-phy";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 9 0>;
-			enable-active-high;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
-	};
-};
-
-&iomuxc {
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
-			MX25_PAD_UART1_RXD__UART1_RXD 0x80000000
-			MX25_PAD_UART1_CTS__UART1_CTS 0x80000000
-			MX25_PAD_UART1_RTS__UART1_RTS 0x80000000
-		>;
-	};
-
-	pinctrl_fec: fecgrp {
-		fsl,pins = <
-			MX25_PAD_D11__GPIO_4_9		0x80000000 /* FEC PHY power on pin */
-			MX25_PAD_D13__GPIO_4_7		0x80000000 /* FEC reset */
-			MX25_PAD_FEC_MDC__FEC_MDC	0x80000000
-			MX25_PAD_FEC_MDIO__FEC_MDIO	0x80000000
-			MX25_PAD_FEC_TDATA0__FEC_TDATA0	0x80000000
-			MX25_PAD_FEC_TDATA1__FEC_TDATA1	0x80000000
-			MX25_PAD_FEC_TX_EN__FEC_TX_EN	0x80000000
-			MX25_PAD_FEC_RDATA0__FEC_RDATA0	0x80000000
-			MX25_PAD_FEC_RDATA1__FEC_RDATA1	0x80000000
-			MX25_PAD_FEC_RX_DV__FEC_RX_DV	0x80000000
-			MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	0x80000000
-		>;
-	};
-
-	pinctrl_nfc: nfcgrp {
-		fsl,pins = <
-			MX25_PAD_NF_CE0__NF_CE0		0x80000000
-			MX25_PAD_NFWE_B__NFWE_B		0x80000000
-			MX25_PAD_NFRE_B__NFRE_B		0x80000000
-			MX25_PAD_NFALE__NFALE		0x80000000
-			MX25_PAD_NFCLE__NFCLE		0x80000000
-			MX25_PAD_NFWP_B__NFWP_B		0x80000000
-			MX25_PAD_NFRB__NFRB		0x80000000
-			MX25_PAD_D7__D7			0x80000000
-			MX25_PAD_D6__D6			0x80000000
-			MX25_PAD_D5__D5			0x80000000
-			MX25_PAD_D4__D4			0x80000000
-			MX25_PAD_D3__D3			0x80000000
-			MX25_PAD_D2__D2			0x80000000
-			MX25_PAD_D1__D1			0x80000000
-			MX25_PAD_D0__D0			0x80000000
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
-	phy-mode = "rmii";
-	phy-supply = <&reg_fec_phy>;
-	status = "okay";
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-on-flash-bbt;
-	nand-ecc-mode = "hw";
-	nand-bus-width = <8>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
deleted file mode 100644
index 303f920201c5..000000000000
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
- * and Markus Pargmann, Pengutronix
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Phytec pca100";
-	compatible = "phytec,imx27-pca100", "fsl,imx27";
-
-	memory@a0000000 {
-		device_type = "memory";
-		reg = <0xa0000000 0x08000000>; /* 128MB */
-	};
-};
-
-&cspi1 {
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>,
-		   <&gpio4 27 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	at24@52 {
-		compatible = "atmel,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-};
-
-&iomuxc {
-	imx27-phycard-s-som {
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
-				MX27_PAD_ATA_DATA13__FEC_COL 0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX27_PAD_NFRB__NFRB 0x0
-				MX27_PAD_NFCLE__NFCLE 0x0
-				MX27_PAD_NFWP_B__NFWP_B 0x0
-				MX27_PAD_NFCE_B__NFCE_B 0x0
-				MX27_PAD_NFALE__NFALE 0x0
-				MX27_PAD_NFRE_B__NFRE_B 0x0
-				MX27_PAD_NFWE_B__NFWE_B 0x0
-			>;
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
deleted file mode 100644
index 14a92fe59770..000000000000
--- a/arch/arm/boot/dts/imx28-apf28.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Armadeus Systems APF28 module";
-	compatible = "armadeus,imx28-apf28", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x300000>;
-				};
-
-				partition@300000 {
-					label = "env";
-					reg = <0x300000 0x80000>;
-				};
-
-				partition@380000 {
-					label = "env2";
-					reg = <0x380000 0x80000>;
-				};
-
-				partition@400000 {
-					label = "dtb";
-					reg = <0x400000 0x80000>;
-				};
-
-				partition@480000 {
-					label = "splash";
-					reg = <0x480000 0x80000>;
-				};
-
-				partition@500000 {
-					label = "kernel";
-					reg = <0x500000 0x800000>;
-				};
-
-				partition@d00000 {
-					label = "rootfs";
-					reg = <0xd00000 0xf300000>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
deleted file mode 100644
index 1b253b47006c..000000000000
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ /dev/null
@@ -1,225 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- */
-
-/* APF28Dev is a docking board for the APF28 SOM */
-#include "imx28-apf28.dts"
-
-/ {
-	model = "Armadeus Systems APF28Dev docking/development board";
-	compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_apf28dev>;
-
-				hog_pins_apf28dev: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D16__GPIO_1_16
-						MX28_PAD_LCD_D17__GPIO_1_17
-						MX28_PAD_LCD_D18__GPIO_1_18
-						MX28_PAD_LCD_D19__GPIO_1_19
-						MX28_PAD_LCD_D20__GPIO_1_20
-						MX28_PAD_LCD_D21__GPIO_1_21
-						MX28_PAD_LCD_D22__GPIO_1_22
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_otg_apf28dev: otg-apf28dev@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D23__GPIO_1_23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_16bit_pins_a
-						&lcdif_pins_apf28dev>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <16>;
-					bus-width = <16>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33000033>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <96>;
-							hfront-porch = <96>;
-							vback-porch = <20>;
-							vfront-porch = <21>;
-							hsync-len = <64>;
-							vsync-len = <4>;
-							hsync-active = <1>;
-							vsync-active = <1>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				xceiver-supply = <&reg_can0_vcc>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				uart-has-rtscts;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_apf28dev
-					&usb0_id_pins_b>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 23 1>;
-			enable-active-high;
-		};
-
-		reg_can0_vcc: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "can0_vcc";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio0 21 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-
-		pwms = <&pwm 3 191000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-button {
-			label = "User button";
-			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
deleted file mode 100644
index b86be320496b..000000000000
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ /dev/null
@@ -1,240 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Bluegiga APX4 Development Kit";
-	compatible = "bluegiga,apx4devkit", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x04000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-						MX28_PAD_GPMI_RDY1__GPIO_0_21
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_JTAG_RTCK__GPIO_4_20
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_apx4: lcdif-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA4__SSP2_D0
-						MX28_PAD_SSP0_DATA5__SSP2_D3
-						MX28_PAD_SSP0_DATA6__SSP2_CMD
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-						MX28_PAD_SSP2_SS1__SSP2_D1
-						MX28_PAD_SSP2_SS2__SSP2_D2
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_apx4>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <88>;
-							hfront-porch = <40>;
-							vback-porch = <32>;
-							vfront-porch = <13>;
-							hsync-len = <48>;
-							vsync-len = <3>;
-							hsync-active = <1>;
-							vsync-active = <1>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				sgtl5000: codec@a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					#sound-dai-cells = <0>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				pcf8563: rtc@51 {
-					compatible = "phg,pcf8563";
-					reg = <0x51>;
-				};
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_2pins_a>;
-				status = "okay";
-			};
-
-			auart2: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart2_2pins_a>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&usb1_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-		      status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "bluegiga,apx4devkit-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "apx4devkit-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio3 28 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
deleted file mode 100644
index 85aa1cc3ff66..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Free Electrons
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Crystalfontz CFA-10036 Board";
-	compatible = "crystalfontz,cfa10036", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				ssd1306_cfa10036: ssd1306-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__GPIO_2_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_cfa10036: leds-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__GPIO_3_4
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_otg_cfa10036: otg-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDY0__USB0_ID
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x31c3 /*
-						MX28_PAD_PWM3__GPIO_3_28 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				bus-width = <4>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_b>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_b>;
-				clock-frequency = <400000>;
-				status = "okay";
-
-				ssd1306: oled@3c {
-					compatible = "solomon,ssd1306fb-i2c";
-					pinctrl-names = "default";
-					pinctrl-0 = <&ssd1306_cfa10036>;
-					reg = <0x3c>;
-					reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-					solomon,height = <32>;
-					solomon,width = <128>;
-					solomon,page-offset = <0>;
-					solomon,com-lrremap;
-					solomon,com-invdir;
-					solomon,com-offset = <32>;
-				};
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_cfa10036>;
-			dr_mode = "peripheral";
-			phy_type = "utmi";
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_cfa10036>;
-
-		power {
-			gpios = <&gpio3 4 1>;
-			default-state = "on";
-		};
-	};
-
-	reg_vddio_sd0: vddio-sd0 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&mmc_pwr_cfa10036>;
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 28 0>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
deleted file mode 100644
index a92b05ef390f..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ /dev/null
@@ -1,428 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Free Electrons
- */
-
-/*
- * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10049 Board";
-	compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
-
-	i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2cmux_pins_cfa10049>;
-		mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
-		i2c-parent = <&i2c1>;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			adc0: nau7802@2a {
-				compatible = "nuvoton,nau7802";
-				reg = <0x2a>;
-				nuvoton,vldo = <3000>;
-			};
-		};
-
-		i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			adc1: nau7802@2a {
-				compatible = "nuvoton,nau7802";
-				reg = <0x2a>;
-				nuvoton,vldo = <3000>;
-			};
-		};
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-				adc2: nau7802@2a {
-				compatible = "nuvoton,nau7802";
-				reg = <0x2a>;
-				nuvoton,vldo = <3000>;
-			};
-		};
-
-		i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pca9555: pca9555@20 {
-				compatible = "nxp,pca9555";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pca_pins_cfa10049>;
-				interrupt-parent = <&gpio2>;
-				interrupts = <19 0x2>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x20>;
-			};
-		};
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10049: usb-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				i2cmux_pins_cfa10049: i2cmux-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D22__GPIO_1_22
-						MX28_PAD_LCD_D23__GPIO_1_23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_pins_cfa10049: mac0-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS2__GPIO_2_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pca_pins_cfa10049: pca-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS0__GPIO_2_19
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				rotary_pins_cfa10049: rotary-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF1_SDATA0__GPIO_3_26
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi2_pins_cfa10049: spi2-cfa10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi3_pins_cfa10049: spi3-cfa10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDN__GPIO_0_24
-						MX28_PAD_GPMI_RESETN__GPIO_0_28
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-						MX28_PAD_GPMI_ALE__GPIO_0_26
-						MX28_PAD_GPMI_CLE__GPIO_0_27
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10049: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				w1_gpio_pins: w1-gpio@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D21__GPIO_1_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10049
-					     &lcdif_pins_cfa10049
-					     &lcdif_pins_cfa10049_pullup>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9216000>;
-							hactive = <320>;
-							vactive = <480>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <15>;
-							vsync-len = <15>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			i2c1: i2c@8005a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c1_pins_a>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10049>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a
-				&mac0_pins_cfa10049>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	spi2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10049>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8357: hx8357@0 {
-			compatible = "himax,hx8357b", "himax,hx8357";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-			im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>;
-		};
-	};
-
-	spi3 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi3_pins_cfa10049>;
-		status = "okay";
-		gpio-sck = <&gpio0 24 0>;
-		gpio-mosi = <&gpio0 28 0>;
-		cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>;
-		num-chipselects = <3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio5: gpio5@0 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-			registers-number = <2>;
-			spi-max-frequency = <100000>;
-		};
-
-		gpio6: gpio6@1 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <1>;
-			registers-number = <4>;
-			spi-max-frequency = <100000>;
-		};
-
-		dac0: dh2228@2 {
-			compatible = "rohm,dh2228fv";
-			reg = <2>;
-			spi-max-frequency = <100000>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rotary_btn_pins_cfa10049>;
-
-		rotary_button {
-			label = "rotary_button";
-			gpios = <&gpio3 26 1>;
-			debounce-interval = <10>;
-			linux,code = <28>;
-		};
-	};
-
-	rotary {
-		compatible = "rotary-encoder";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rotary_pins_cfa10049>;
-		gpios = <&gpio3 24 1>, <&gpio3 25 1>;
-		linux,axis = <1>; /* REL_Y */
-		rotary-encoder,relative-axis;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-
-	};
-
-	onewire {
-		compatible = "w1-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&w1_gpio_pins>;
-		status = "okay";
-		gpios = <&gpio1 21 0>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
deleted file mode 100644
index d05c370dfc17..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ /dev/null
@@ -1,161 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * 				  Free Electrons
- */
-
-/*
- * The CFA-10055 is an expansion board for the CFA-10036 module and
- * CFA-10037, thus we need to include the CFA-10037 DTS.
- */
-#include "imx28-cfa10037.dts"
-
-/ {
-	model = "Crystalfontz CFA-10055 Board";
-	compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				spi2_pins_cfa10055: spi2-cfa10055@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10055: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10055
-					     &lcdif_pins_cfa10055
-					     &lcdif_pins_cfa10055_pullup>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9216000>;
-							hactive = <320>;
-							vactive = <480>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <15>;
-							vsync-len = <15>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-		};
-	};
-
-	spi2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10055>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8357: hx8357@0 {
-			compatible = "himax,hx8357b", "himax,hx8357";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
deleted file mode 100644
index c1060bd5f17f..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10056.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Free Electrons
- */
-
-/*
- * The CFA-10055 is an expansion board for the CFA-10036 module and
- * CFA-10037, thus we need to include the CFA-10037 DTS.
- */
-#include "imx28-cfa10037.dts"
-
-/ {
-	model = "Crystalfontz CFA-10056 Board";
-	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				spi2_pins_cfa10056: spi2-cfa10056@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_pins_cfa10056: lcdif-10056@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-						&lcdif_pins_cfa10056
-						&lcdif_pins_cfa10056_pullup >;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <32000000>;
-							hactive = <480>;
-							vactive = <800>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <5>;
-							vsync-len = <5>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	spi2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10056>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8369: hx8369@0 {
-			compatible = "himax,hx8369a", "himax,hx8369";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
deleted file mode 100644
index 2f7e479dbc74..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * Copyright 2012 Free Electrons
- */
-
-/*
- * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10057 Board";
-	compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10057: usb-10057@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10057: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10057
-					     &lcdif_pins_cfa10057>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <480>;
-							vactive = <800>;
-							hfront-porch = <12>;
-							hback-porch = <2>;
-							vfront-porch = <5>;
-							vback-porch = <3>;
-							hsync-len = <2>;
-							vsync-len = <2>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm4_pins_a>;
-				status = "okay";
-			};
-
-			i2c1: i2c@8005a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c1_pins_a>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10057>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 4 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
deleted file mode 100644
index 4465fd86785a..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ /dev/null
@@ -1,138 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * Copyright 2013 Free Electrons
- */
-
-/*
- * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10058 Board";
-	compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10058: usb-10058@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10058: lcdif-10058@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-						 &lcdif_pins_cfa10058>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <40>;
-							hfront-porch = <40>;
-							vback-porch = <13>;
-							vfront-porch = <29>;
-							hsync-len = <8>;
-							vsync-len = <8>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10058>;
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
deleted file mode 100644
index d451fa018d83..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts
+++ /dev/null
@@ -1,184 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill 2 485";
-	compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_b
-					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		rs485-red {
-			label = "duckbill:red:rs485";
-			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-		};
-
-		rs485-green {
-			label = "duckbill:green:rs485";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
deleted file mode 100644
index bacb846f99e3..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill 2 EnOcean";
-	compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_b
-					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-						MX28_PAD_AUART0_CTS__GPIO_3_2
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				enocean_button: enocean-button@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RTS__GPIO_3_3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		enocean-blue {
-			label = "duckbill:blue:enocean";
-			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-		};
-
-		enocean-red {
-			label = "duckbill:red:enocean";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-		};
-
-		enocean-green {
-			label = "duckbill:green:enocean";
-			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&enocean_button>;
-
-		enocean {
-			label = "EnOcean";
-			linux,code = <KEY_NEW>;
-			gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
deleted file mode 100644
index 0e8be5975709..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
+++ /dev/null
@@ -1,194 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill 2 SPI";
-	compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28";
-
-	aliases {
-		ethernet1 = &qca7000;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				qca7000: ethernet@0 {
-					reg = <0>;
-					compatible = "qca,qca7000";
-					pinctrl-names = "default";
-					pinctrl-0 = <&qca7000_pins>;
-					interrupt-parent = <&gpio3>;
-					interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-					spi-cpha;
-					spi-cpol;
-					spi-max-frequency = <8000000>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: led@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				qca7000_pins: qca7000@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RTS__GPIO_3_3    /* Interrupt */
-						MX28_PAD_LCD_D13__GPIO_1_13      /* QCA7K reset */
-						MX28_PAD_LCD_D14__GPIO_1_14      /* GPIO 0 */
-						MX28_PAD_LCD_D15__GPIO_1_15      /* GPIO 1 */
-						MX28_PAD_LCD_D18__GPIO_1_18      /* GPIO 2 */
-						MX28_PAD_LCD_D21__GPIO_1_21      /* GPIO 3 */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts
deleted file mode 100644
index 23fd3036404d..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2.dts
+++ /dev/null
@@ -1,178 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill 2";
-	compatible = "i2se,duckbill-2", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_b
-					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
deleted file mode 100644
index c666afb12445..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill.dts
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei@heimpold.de>
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill";
-	compatible = "i2se,duckbill", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__GPIO_2_7    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__GPIO_3_4
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			status = "okay";
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
deleted file mode 100644
index 1053b7c584d8..000000000000
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ /dev/null
@@ -1,360 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Freescale i.MX28 Evaluation Kit";
-	compatible = "fsl,imx28-evk", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_vddio_sd0: regulator-vddio-sd0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 28 0>;
-	};
-
-	reg_fec_3v3: regulator-fec-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fec-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 15 0>;
-	};
-
-	reg_usb0_vbus: regulator-usb0-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb0_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 9 0>;
-		enable-active-high;
-	};
-
-	reg_usb1_vbus: regulator-usb1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 8 0>;
-		enable-active-high;
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 30 0>;
-		enable-active-high;
-	};
-
-	reg_can_3v3: regulator-can-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "can-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 13 0>;
-		enable-active-high;
-	};
-
-	reg_lcd_5v: regulator-lcd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	panel {
-		compatible = "sii,43wvf1g";
-		backlight = <&backlight_display>;
-		dvdd-supply = <&reg_lcd_3v3>;
-		avdd-supply = <&reg_lcd_5v>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
-					     &gpmi_pins_evk>;
-				status = "okay";
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio2 12 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp1: spi@80012000 {
-				compatible = "fsl,imx28-mmc";
-				bus-width = <8>;
-				wp-gpios = <&gpio0 28 0>;
-			};
-
-			ssp2: spi@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "sst,sst25vf016b", "jedec,spi-nor";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP1_CMD__GPIO_2_13
-						MX28_PAD_SSP1_DATA3__GPIO_2_15
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-						MX28_PAD_SSP1_SCK__GPIO_2_12
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_AUART2_TX__GPIO_3_9
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pin_gpio3_5: led_gpio3_5@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_evk: gpmi-nand-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPMI_CE1N
-						MX28_PAD_GPMI_RDY1__GPMI_READY1
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_evk: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_evk>;
-				status = "okay";
-
-				port {
-					display_out: endpoint {
-						remote-endpoint = <&panel_in>;
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
-
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-				fsl,ave-ctrl = <4>;
-				fsl,ave-delay = <2>;
-				fsl,settling = <10>;
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				sgtl5000: codec@a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					#sound-dai-cells = <0>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				at24@51 {
-					compatible = "atmel,24c32";
-					pagesize = <32>;
-					reg = <0x51>;
-				};
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				uart-has-rtscts;
-				status = "okay";
-			};
-
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_id_pins_a>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-supply = <&reg_fec_3v3>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx28-evk-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "imx28-evk-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio3_5>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio3 5 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	backlight_display: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi
deleted file mode 100644
index 2bdb4c093545..000000000000
--- a/arch/arm/boot/dts/imx28-m28.dtsi
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Marek Vasut <marex@denx.de>
- */
-
-#include "imx28.dtsi"
-
-/ {
-	model = "Aries/DENX M28";
-	compatible = "aries,m28", "denx,m28", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				rtc: rtc@68 {
-					compatible = "st,m41t62";
-					reg = <0x68>;
-				};
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
deleted file mode 100644
index 865ac3d573c7..000000000000
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ /dev/null
@@ -1,266 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "MSR M28CU3";
-	compatible = "msr,m28cu3", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "gpmi-nfc-0-boot";
-					reg = <0x00000000 0x01400000>;
-					read-only;
-				};
-
-				partition@1 {
-					label = "gpmi-nfc-general-use";
-					reg = <0x01400000 0x0ec00000>;
-				};
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_a
-					     &mmc2_cd_cfg
-					     &mmc2_sck_cfg_a>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd1>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS0__GPIO_2_19
-						MX28_PAD_PWM4__GPIO_3_29
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_m28: lcdif-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_VSYNC__LCD_VSYNC
-						MX28_PAD_LCD_HSYNC__LCD_HSYNC
-						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-						MX28_PAD_LCD_RESET__LCD_RESET
-						MX28_PAD_LCD_CS__LCD_ENABLE
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_gpio: leds-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP3_MISO__GPIO_2_26
-						MX28_PAD_SSP3_SCK__GPIO_2_24
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			ocotp@8002c000 {
-				status = "okay";
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_m28>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <6410256>;
-							hactive = <320>;
-							vactive = <240>;
-							hback-porch = <38>;
-							hfront-porch = <20>;
-							vback-porch = <15>;
-							vfront-porch = <5>;
-							hsync-len = <30>;
-							vsync-len = <3>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_b>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_2pins_b>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_pins_a>;
-			disable-over-current;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_gpio>;
-
-		user1 {
-			label = "sd0-led";
-			gpios = <&gpio2 26 0>;
-			linux,default-trigger = "mmc0";
-		};
-
-		user2 {
-			label = "sd1-led";
-			gpios = <&gpio2 24 0>;
-			linux,default-trigger = "mmc2";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 29 0>;
-		};
-
-		reg_vddio_sd1: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vddio-sd1";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 19 0>;
-		};
-
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 8 0>;
-			enable-active-high;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
deleted file mode 100644
index 13acdc7916b9..000000000000
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ /dev/null
@@ -1,271 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
-
- * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx28-m28.dtsi"
-
-/ {
-	model = "Aries/DENX M28EVK";
-	compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio3 10 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "m25p80", "jedec,spi-nor";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_AUART2_CTS__GPIO_3_10
-						MX28_PAD_AUART2_RTS__GPIO_3_11
-						MX28_PAD_AUART3_RX__GPIO_3_12
-						MX28_PAD_AUART3_TX__GPIO_3_13
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_m28: lcdif-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-						MX28_PAD_LCD_ENABLE__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_m28>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <16>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33260000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <0>;
-							hfront-porch = <256>;
-							vback-porch = <0>;
-							vfront-porch = <45>;
-							hsync-len = <1>;
-							vsync-len = <1>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				status = "okay";
-			};
-
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				sgtl5000: codec@a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					#sound-dai-cells = <0>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				eeprom: eeprom@51 {
-					compatible = "atmel,24c128";
-					reg = <0x51>;
-					pagesize = <32>;
-				};
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_pins_a>;
-				status = "okay";
-			};
-
-			auart2: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart2_2pins_b>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm4_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_pins_a>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_pins_a>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			clocks = <&clks 57>, <&clks 57>;
-			clock-names = "ipg", "ahb";
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 4 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	regulators {
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 28 0>;
-		};
-
-		reg_usb0_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 12 0>;
-		};
-
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 13 0>;
-		};
-	};
-
-	sound {
-		compatible = "denx,m28evk-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "m28evk-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
deleted file mode 100644
index 90928db0df70..000000000000
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "SchulerControl GmbH, SC SPS 1";
-	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog-gpios@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D00__GPIO_0_0
-						MX28_PAD_GPMI_D03__GPIO_0_3
-						MX28_PAD_GPMI_D06__GPIO_0_6
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "everspin,mr25h256", "mr25h256";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				rtc: rtc@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-
-				eeprom: eeprom@52 {
-					compatible = "atmel,24c64";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_pins_b>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 9 0>;
-		};
-	};
-
-	leds {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "gpio-leds";
-		status = "okay";
-
-		led@1 {
-			label = "sps1-1:yellow:user";
-			gpios = <&gpio0 6 0>;
-			linux,default-trigger = "heartbeat";
-			reg = <0>;
-		};
-
-		led@2 {
-			label = "sps1-2:red:user";
-			gpios = <&gpio0 3 0>;
-			linux,default-trigger = "heartbeat";
-			reg = <1>;
-		};
-
-		led@3 {
-			label = "sps1-3:red:user";
-			gpios = <&gpio0 0 0>;
-			default-trigger = "heartbeat";
-			reg = <2>;
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts
deleted file mode 100644
index 0d58da1c0cc5..000000000000
--- a/arch/arm/boot/dts/imx28-ts4600.dts
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2016 Savoir-Faire Linux
- * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-#include "dt-bindings/gpio/gpio.h"
-
-/ {
-
-	model = "Technologic Systems i.MX28 TS-4600";
-	compatible = "technologic,imx28-ts4600", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x10000000>;   /* 256MB */
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					     &mmc0_sck_cfg
-					     &en_sd_pwr>;
-				broken-cd;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-
-				en_sd_pwr: en-sd-pwr@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM3__GPIO_3_28
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-			};
-		};
-
-		apbx@80040000 {
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	reg_vddio_sd0: regulator-vddio-sd0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		gpio = <&gpio3 28 GPIO_ACTIVE_LOW>;
-	};
-
-};
diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
deleted file mode 100644
index 17bd2a97609a..000000000000
--- a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-#include "imx35.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX35";
-	compatible = "eukrea,cpuimx35", "fsl,imx35";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>; /* 128M */
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	tsc2007: tsc2007@48 {
-		compatible = "ti,tsc2007";
-		gpios = <&gpio3 2 0>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <0x2 0x8>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007_1>;
-		reg = <0x48>;
-		ti,x-plate-ohms = <180>;
-	};
-};
-
-&iomuxc {
-	imx35-eukrea {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX35_PAD_FEC_TX_CLK__FEC_TX_CLK		0x80000000
-				MX35_PAD_FEC_RX_CLK__FEC_RX_CLK		0x80000000
-				MX35_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
-				MX35_PAD_FEC_COL__FEC_COL		0x80000000
-				MX35_PAD_FEC_RDATA0__FEC_RDATA_0	0x80000000
-				MX35_PAD_FEC_TDATA0__FEC_TDATA_0	0x80000000
-				MX35_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX35_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX35_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX35_PAD_FEC_TX_ERR__FEC_TX_ERR		0x80000000
-				MX35_PAD_FEC_RX_ERR__FEC_RX_ERR		0x80000000
-				MX35_PAD_FEC_CRS__FEC_CRS		0x80000000
-				MX35_PAD_FEC_RDATA1__FEC_RDATA_1	0x80000000
-				MX35_PAD_FEC_TDATA1__FEC_TDATA_1	0x80000000
-				MX35_PAD_FEC_RDATA2__FEC_RDATA_2	0x80000000
-				MX35_PAD_FEC_TDATA2__FEC_TDATA_2	0x80000000
-				MX35_PAD_FEC_RDATA3__FEC_RDATA_3	0x80000000
-				MX35_PAD_FEC_TDATA3__FEC_TDATA_3	0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX35_PAD_I2C1_CLK__I2C1_SCL		0x80000000
-				MX35_PAD_I2C1_DAT__I2C1_SDA		0x80000000
-			>;
-		};
-
-		pinctrl_tsc2007_1: tsc2007grp-1 {
-			fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
deleted file mode 100644
index b1c11170ac25..000000000000
--- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx35-eukrea-cpuimx35.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX35";
-	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_bp1>;
-
-		bp1 {
-			label = "BP1";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			wakeup-source;
-			linux,input-type = <1>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led1>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "eukrea,asoc-tlv320";
-		eukrea,model = "imx35-eukrea-tlv320aic23";
-		ssi-controller = <&ssi1>;
-		fsl,mux-int-port = <1>;
-		fsl,mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c1 {
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&iomuxc {
-	imx35-eukrea {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS	0x80000000
-				MX35_PAD_STXD4__AUDMUX_AUD4_TXD		0x80000000
-				MX35_PAD_SRXD4__AUDMUX_AUD4_RXD		0x80000000
-				MX35_PAD_SCK4__AUDMUX_AUD4_TXC		0x80000000
-			>;
-		};
-
-		pinctrl_bp1: bp1grp {
-			fsl,pins = <MX35_PAD_LD19__GPIO3_25  0x80000000>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
-				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
-				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
-				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
-				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
-				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
-				MX35_PAD_LD18__GPIO3_24			0x80000000 /* CD */
-			>;
-		};
-
-		pinctrl_led1: led1grp {
-			fsl,pins = <MX35_PAD_LD23__GPIO3_29  0x80000000>;
-		};
-
-		pinctrl_reg_lcd_3v3: reg-lcd-3v3 {
-			fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
-				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
-				MX35_PAD_CTS1__UART1_CTS		0x1c5
-				MX35_PAD_RTS1__UART1_RTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX35_PAD_RXD2__UART2_RXD_MUX		0x1c5
-				MX35_PAD_TXD2__UART2_TXD_MUX		0x1c5
-				MX35_PAD_RTS2__UART2_RTS		0x1c5
-				MX35_PAD_CTS2__UART2_CTS		0x1c5
-			>;
-		};
-	};
-};
-
-&ssi1 {
-	codec-handle = <&tlv320aic23>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbhost1 {
-	phy_type = "serial";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi";
-	dr_mode = "otg";
-	external-vbus-divider;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts
deleted file mode 100644
index ddce0a844758..000000000000
--- a/arch/arm/boot/dts/imx35-pdk.dts
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
-// Copyright 2014 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-#include "imx35.dtsi"
-
-/ {
-	model = "Freescale i.MX35 Product Development Kit";
-	compatible = "fsl,imx35-pdk", "fsl,imx35";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>,
-		      <0x90000000 0x8000000>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx35-pdk {
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
-				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
-				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
-				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
-				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
-				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
-				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
-				MX35_PAD_CTS1__UART1_CTS		0x1c5
-				MX35_PAD_RTS1__UART1_RTS		0x1c5
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <16>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
deleted file mode 100644
index 4ea5c23f181b..000000000000
--- a/arch/arm/boot/dts/imx50-evk.dts
+++ /dev/null
@@ -1,104 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2013 Greg Ungerer <gerg@uclinux.org>
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-/dts-v1/;
-#include "imx50.dtsi"
-
-/ {
-	model = "Freescale i.MX50 Evaluation Kit";
-	compatible = "fsl,imx50-evk", "fsl,imx50";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x80000000>;
-	};
-};
-
-&cspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi>;
-	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	flash: m25p32@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p32", "jedec,spi-nor";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0x0 0x100000>;
-			read-only;
-		};
-
-		partition@100000 {
-			label = "kernel";
-			reg = <0x100000 0x300000>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx50-evk {
-		pinctrl_cspi: cspigrp {
-			fsl,pins = <
-				MX50_PAD_CSPI_SCLK__CSPI_SCLK		0x00
-				MX50_PAD_CSPI_MISO__CSPI_MISO		0x00
-				MX50_PAD_CSPI_MOSI__CSPI_MOSI		0x00
-				MX50_PAD_CSPI_SS0__GPIO4_11		0xc4
-				MX50_PAD_ECSPI1_MOSI__GPIO4_13		0x84
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX50_PAD_SSI_RXFS__FEC_MDC		0x80
-				MX50_PAD_SSI_RXC__FEC_MDIO		0x80
-				MX50_PAD_DISP_D0__FEC_TX_CLK		0x80
-				MX50_PAD_DISP_D1__FEC_RX_ERR		0x80
-				MX50_PAD_DISP_D2__FEC_RX_DV		0x80
-				MX50_PAD_DISP_D3__FEC_RDATA_1		0x80
-				MX50_PAD_DISP_D4__FEC_RDATA_0		0x80
-				MX50_PAD_DISP_D5__FEC_TX_EN		0x80
-				MX50_PAD_DISP_D6__FEC_TDATA_1		0x80
-				MX50_PAD_DISP_D7__FEC_TDATA_0		0x80
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX50_PAD_UART1_TXD__UART1_TXD_MUX	0x1e4
-				MX50_PAD_UART1_RXD__UART1_RXD_MUX	0x1e4
-				MX50_PAD_UART1_RTS__UART1_RTS		0x1e4
-				MX50_PAD_UART1_CTS__UART1_CTS		0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts
deleted file mode 100644
index ba28ffe06fe2..000000000000
--- a/arch/arm/boot/dts/imx51-apf51.dts
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- * Copyright 2012 Laurent Cans <laurent.cans@gmail.com>
- *
- * Based on mx51-babbage.dts
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-#include "imx51.dtsi"
-
-/ {
-	model = "Armadeus Systems APF51 module";
-	compatible = "armadeus,imx51-apf51", "fsl,imx51";
-
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0x20000000>;
-	};
-
-	clocks {
-		osc {
-			clock-frequency = <33554432>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx51-apf51 {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
-				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
-				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
-				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
-				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
-				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
-				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
-				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
-				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
-				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
-				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
-				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
-				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
-				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
-				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
-				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
-				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
deleted file mode 100644
index c66f274ba4e9..000000000000
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ /dev/null
@@ -1,217 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Armadeus Systems - <support@armadeus.com>
- */
-
-/* APF51Dev is a docking board for the APF51 SOM */
-#include "imx51-apf51.dts"
-
-/ {
-	model = "Armadeus Systems APF51Dev docking/development board";
-	compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
-
-	backlight {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		compatible = "gpio-backlight";
-		gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-		default-on;
-	};
-
-	disp1 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp1>;
-
-		display-timings {
-			lw700 {
-				native-mode;
-				clock-frequency = <33000033>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <96>;
-				hfront-porch = <96>;
-				vback-porch = <20>;
-				vfront-porch = <21>;
-				hsync-len = <64>;
-				vsync-len = <4>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-
-		port {
-			display_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp1>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-key {
-			label = "user";
-			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-			linux,code = <256>; /* BTN_0 */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
-		   <&gpio4 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>,
-		   <&gpio3 27 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx51-apf51dev {
-		pinctrl_backlight: backlightgrp {
-			fsl,pins = <
-				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX51_PAD_EIM_EB2__GPIO2_22   0x0C5
-				MX51_PAD_EIM_EB3__GPIO2_23   0x0C5
-				MX51_PAD_EIM_CS4__GPIO2_29   0x100
-				MX51_PAD_NANDF_D13__GPIO3_27 0x0C5
-				MX51_PAD_NANDF_D12__GPIO3_28 0x0C5
-				MX51_PAD_CSPI1_SS0__GPIO4_24 0x0C5
-				MX51_PAD_CSPI1_SS1__GPIO4_25 0x0C5
-				MX51_PAD_GPIO1_2__GPIO1_2    0x0C5
-				MX51_PAD_GPIO1_3__GPIO1_3    0x0C5
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX51_PAD_NANDF_RB3__ECSPI2_MISO		0x185
-				MX51_PAD_NANDF_D15__ECSPI2_MOSI		0x185
-				MX51_PAD_NANDF_RB2__ECSPI2_SCLK		0x185
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
-				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
-				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
-				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
-				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
-				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX51_PAD_EIM_D27__I2C2_SCL		0x400001ed
-				MX51_PAD_EIM_D24__I2C2_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_ipu_disp1: ipudisp1grp {
-			fsl,pins = <
-				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
-				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
-				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
-				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
-				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
-				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
-				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
-				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
-				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
-				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
-				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
-				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
-				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
-				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
-				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
-				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
-				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
-				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
-				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
-				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
-				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
-				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
-				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
-				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
-				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
-				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
-			>;
-		};
-	};
-};
-
-&ipu_di0_disp1 {
-	remote-endpoint = <&display_in>;
-};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
deleted file mode 100644
index 552196d8a60a..000000000000
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ /dev/null
@@ -1,726 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-/dts-v1/;
-#include "imx51.dtsi"
-
-/ {
-	model = "Freescale i.MX51 Babbage Board";
-	compatible = "fsl,imx51-babbage", "fsl,imx51";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0x20000000>;
-	};
-
-	ckih1 {
-		clock-frequency = <22579200>;
-	};
-
-	clk_osc: clk-osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-	};
-
-	clk_osc_gate: clk-osc-gate {
-		compatible = "gpio-gate-clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_clk26mhz_osc>;
-		clocks = <&clk_osc>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	clk_audio: clk-audio {
-		compatible = "gpio-gate-clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_clk26mhz_audio>;
-		clocks = <&clk_osc_gate>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	};
-
-	clk_usb: clk-usb {
-		compatible = "gpio-gate-clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_clk26mhz_usb>;
-		clocks = <&clk_osc_gate>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-	};
-
-	display1: disp1 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp1>;
-
-		port@0 {
-		reg = <0>;
-
-			display0_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			parallel_display_out: endpoint {
-				remote-endpoint = <&tfp410_in>;
-			};
-		};
-	};
-
-	display2: disp2 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb565";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp2>;
-		status = "disabled";
-		display-timings {
-			native-mode = <&timing1>;
-			timing1: claawvga {
-				clock-frequency = <27000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <40>;
-				hfront-porch = <60>;
-				vback-porch = <10>;
-				vfront-porch = <10>;
-				hsync-len = <20>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-
-		port {
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp2>;
-			};
-		};
-	};
-
-	dvi-connector {
-		compatible = "dvi-connector";
-		digital;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	dvi-encoder {
-		compatible = "ti,tfp410";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint {
-					remote-endpoint = <&parallel_display_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led-diagnostic {
-			label = "diagnostic";
-			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_hub_reset: regulator@0 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbotgreg>;
-			reg = <0>;
-			regulator-name = "hub_reset";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx51-babbage-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx51-babbage-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <3>;
-	};
-
-	usbphy1: usbphy1 {
-		compatible = "usb-nop-xceiv";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh1reg>;
-		clocks = <&clk_usb>;
-		clock-names = "main_clk";
-		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
-		vcc-supply = <&vusb_reg>;
-		#phy-cells = <0>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	pmic: mc13892@0 {
-		compatible = "fsl,mc13892";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		spi-max-frequency = <6000000>;
-		spi-cs-high;
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,mc13xxx-uses-adc;
-		fsl,mc13xxx-uses-rtc;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1375000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vpll_reg: vpll {
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vdig_reg: vdig {
-				regulator-min-microvolt = <1650000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-			};
-
-			vsd_reg: vsd {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3150000>;
-			};
-
-			vusb_reg: vusb {
-				regulator-boot-on;
-			};
-
-			vusb2_reg: vusb2 {
-				regulator-min-microvolt = <2400000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vvideo_reg: vvideo {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-min-microvolt = <2300000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2900000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	flash: at45db321d@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-
-		partition@0 {
-			label = "U-Boot";
-			reg = <0x0 0x40000>;
-			read-only;
-		};
-
-		partition@40000 {
-			label = "Kernel";
-			reg = <0x40000 0x3c0000>;
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		clocks = <&clk_audio>;
-		VDDA-supply = <&vdig_reg>;
-		VDDIO-supply = <&vvideo_reg>;
-	};
-};
-
-&ipu_di0_disp1 {
-	remote-endpoint = <&display0_in>;
-};
-
-&ipu_di1_disp2 {
-	remote-endpoint = <&display1_in>;
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	linux,keymap = <
-		MATRIX_KEY(0, 0, KEY_UP)
-		MATRIX_KEY(0, 1, KEY_DOWN)
-		MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
-		MATRIX_KEY(0, 3, KEY_HOME)
-		MATRIX_KEY(1, 0, KEY_RIGHT)
-		MATRIX_KEY(1, 1, KEY_LEFT)
-		MATRIX_KEY(1, 2, KEY_ENTER)
-		MATRIX_KEY(1, 3, KEY_VOLUMEUP)
-		MATRIX_KEY(2, 0, KEY_F6)
-		MATRIX_KEY(2, 1, KEY_F8)
-		MATRIX_KEY(2, 2, KEY_F9)
-		MATRIX_KEY(2, 3, KEY_F10)
-		MATRIX_KEY(3, 0, KEY_F1)
-		MATRIX_KEY(3, 1, KEY_F2)
-		MATRIX_KEY(3, 2, KEY_F3)
-		MATRIX_KEY(3, 3, KEY_POWER)
-	>;
-	status = "okay";
-};
-
-&pmu {
-	secure-reg-access;
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	vbus-supply = <&reg_hub_reset>;
-	fsl,usbphy = <&usbphy1>;
-	phy_type = "ulpi";
-	status = "okay";
-};
-
-&usbphy0 {
-	vcc-supply = <&vusb_reg>;
-};
-
-&usbotg {
-	dr_mode = "otg";
-	disable-over-current;
-	phy_type = "utmi_wide";
-	status = "okay";
-};
-
-&iomuxc {
-	imx51-babbage {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
-				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
-				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
-				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
-			>;
-		};
-
-		pinctrl_clk26mhz_audio: clk26mhzaudiocgrp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_RDY__GPIO4_26		0x85
-			>;
-		};
-
-		pinctrl_clk26mhz_osc: clk26mhzoscgrp {
-			fsl,pins = <
-				MX51_PAD_DI1_PIN12__GPIO3_1		0x85
-			>;
-		};
-
-		pinctrl_clk26mhz_usb: clk26mhzusbgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_D17__GPIO2_1		0x85
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
-				MX51_PAD_CSPI1_SS1__GPIO4_25		0x85 /* CS1 */
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-				MX51_PAD_GPIO1_0__GPIO1_0		0x100
-				MX51_PAD_GPIO1_1__GPIO1_1		0x100
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
-				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
-				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
-				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
-				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
-				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
-				MX51_PAD_GPIO1_5__GPIO1_5		0x100 /* WP */
-				MX51_PAD_GPIO1_6__GPIO1_6		0x100 /* CD */
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
-				MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
-				MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
-				MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
-				MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
-				MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
-				MX51_PAD_NANDF_RB2__FEC_COL		0x00000180
-				MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x00000180
-				MX51_PAD_NANDF_D9__FEC_RDATA0		0x00002180
-				MX51_PAD_NANDF_D8__FEC_TDATA0		0x00002004
-				MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
-				MX51_PAD_NANDF_CS3__FEC_MDC		0x00002004
-				MX51_PAD_NANDF_CS4__FEC_TDATA1		0x00002004
-				MX51_PAD_NANDF_CS5__FEC_TDATA2		0x00002004
-				MX51_PAD_NANDF_CS6__FEC_TDATA3		0x00002004
-				MX51_PAD_NANDF_CS7__FEC_TX_EN		0x00002004
-				MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	0x00002180
-				MX51_PAD_NANDF_D11__FEC_RX_DV		0x000020a4
-				MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
-			>;
-		};
-
-		pinctrl_gpio_keys: gpiokeysgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_A27__GPIO2_21		0x5
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_D22__GPIO2_6		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX51_PAD_EIM_D19__I2C1_SCL		0x400001ed
-				MX51_PAD_EIM_D16__I2C1_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
-				MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_ipu_disp1: ipudisp1grp {
-			fsl,pins = <
-				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
-				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
-				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
-				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
-				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
-				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
-				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
-				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
-				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
-				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
-				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
-				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
-				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
-				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
-				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
-				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
-				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
-				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
-				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
-				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
-				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
-				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
-				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
-				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
-				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
-				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
-			>;
-		};
-
-		pinctrl_ipu_disp2: ipudisp2grp {
-			fsl,pins = <
-				MX51_PAD_DISP2_DAT0__DISP2_DAT0		0x5
-				MX51_PAD_DISP2_DAT1__DISP2_DAT1		0x5
-				MX51_PAD_DISP2_DAT2__DISP2_DAT2		0x5
-				MX51_PAD_DISP2_DAT3__DISP2_DAT3		0x5
-				MX51_PAD_DISP2_DAT4__DISP2_DAT4		0x5
-				MX51_PAD_DISP2_DAT5__DISP2_DAT5		0x5
-				MX51_PAD_DISP2_DAT6__DISP2_DAT6		0x5
-				MX51_PAD_DISP2_DAT7__DISP2_DAT7		0x5
-				MX51_PAD_DISP2_DAT8__DISP2_DAT8		0x5
-				MX51_PAD_DISP2_DAT9__DISP2_DAT9		0x5
-				MX51_PAD_DISP2_DAT10__DISP2_DAT10	0x5
-				MX51_PAD_DISP2_DAT11__DISP2_DAT11	0x5
-				MX51_PAD_DISP2_DAT12__DISP2_DAT12	0x5
-				MX51_PAD_DISP2_DAT13__DISP2_DAT13	0x5
-				MX51_PAD_DISP2_DAT14__DISP2_DAT14	0x5
-				MX51_PAD_DISP2_DAT15__DISP2_DAT15	0x5
-				MX51_PAD_DI2_PIN2__DI2_PIN2		0x5
-				MX51_PAD_DI2_PIN3__DI2_PIN3		0x5
-				MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
-				MX51_PAD_DI_GP4__DI2_PIN15		0x5
-			>;
-		};
-
-		pinctrl_kpp: kppgrp {
-			fsl,pins = <
-				MX51_PAD_KEY_ROW0__KEY_ROW0		0xe0
-				MX51_PAD_KEY_ROW1__KEY_ROW1		0xe0
-				MX51_PAD_KEY_ROW2__KEY_ROW2		0xe0
-				MX51_PAD_KEY_ROW3__KEY_ROW3		0xe0
-				MX51_PAD_KEY_COL0__KEY_COL0		0xe8
-				MX51_PAD_KEY_COL1__KEY_COL1		0xe8
-				MX51_PAD_KEY_COL2__KEY_COL2		0xe8
-				MX51_PAD_KEY_COL3__KEY_COL3		0xe8
-			>;
-		};
-
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_8__GPIO1_8		0xe5 /* IRQ */
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-				MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
-				MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
-				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_EIM_D25__UART3_RXD		0x1c5
-				MX51_PAD_EIM_D26__UART3_TXD		0x1c5
-				MX51_PAD_EIM_D27__UART3_RTS		0x1c5
-				MX51_PAD_EIM_D24__UART3_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX51_PAD_USBH1_CLK__USBH1_CLK		0x80000000
-				MX51_PAD_USBH1_DIR__USBH1_DIR		0x80000000
-				MX51_PAD_USBH1_NXT__USBH1_NXT		0x80000000
-				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x80000000
-				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x80000000
-				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x80000000
-				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x80000000
-				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x80000000
-				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x80000000
-				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x80000000
-				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x80000000
-			>;
-		};
-
-		pinctrl_usbh1reg: usbh1reggrp {
-			fsl,pins = <
-				MX51_PAD_EIM_D21__GPIO2_5		0x85
-			>;
-		};
-
-		pinctrl_usbotgreg: usbotgreggrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_7__GPIO1_7		0x85
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
deleted file mode 100644
index 10cae7c3a879..000000000000
--- a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
+++ /dev/null
@@ -1,126 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- */
-
-#include "imx51-digi-connectcore-som.dtsi"
-
-/ {
-	model = "Digi ConnectCore CC(W)-MX51 JSK";
-	compatible = "digi,connectcore-ccxmx51-jsk",
-		     "digi,connectcore-ccxmx51-som", "fsl,imx51";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	usbphy1: usbphy1 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
-		clock-names = "main_clk";
-		#phy-cells = <0>;
-	};
-};
-
-&esdhc1 {
-	status = "okay";
-};
-
-&owire {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_owire>;
-	status = "okay";
-};
-
-&pmic {
-	fsl,mc13xxx-uses-rtc;
-
-	regulators {
-		vcoincell_reg: vcoincell {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	fsl,usbphy = <&usbphy1>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	disable-over-current;
-	status = "okay";
-};
-
-&iomuxc {
-	imx51-digi-connectcore-jsk {
-		pinctrl_owire: owiregrp {
-			fsl,pins = <
-				MX51_PAD_OWIRE_LINE__OWIRE_LINE		0x40000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
-				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
-				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x1e5
-				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x1e5
-				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x1e5
-				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x1e5
-				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x1e5
-				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x1e5
-				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x1e5
-				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x1e5
-				MX51_PAD_USBH1_CLK__USBH1_CLK		0x1e5
-				MX51_PAD_USBH1_DIR__USBH1_DIR		0x1e5
-				MX51_PAD_USBH1_NXT__USBH1_NXT		0x1e5
-				MX51_PAD_USBH1_STP__USBH1_STP		0x1e5
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
deleted file mode 100644
index f0809a16a2ce..000000000000
--- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
+++ /dev/null
@@ -1,376 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- */
-
-/dts-v1/;
-#include "imx51.dtsi"
-
-/ {
-	model = "Digi ConnectCore CC(W)-MX51";
-	compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51";
-
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0x08000000>;
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	pmic: mc13892@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mc13892>;
-		compatible = "fsl,mc13892";
-		spi-max-frequency = <16000000>;
-		spi-cs-high;
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1175000>;
-				regulator-max-microvolt = <1275000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <1150000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst { };
-
-			viohi_reg: viohi {
-				regulator-always-on;
-			};
-
-			vpll_reg: vpll {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vdig_reg: vdig {
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-always-on;
-			};
-
-			vsd_reg: vsd {
-				regulator-min-microvolt = <3150000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
-			vusb2_reg: vusb2 {
-				regulator-min-microvolt = <2600000>;
-				regulator-max-microvolt = <2600000>;
-				regulator-always-on;
-			};
-
-			vvideo_reg: vvideo {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2750000>;
-				regulator-max-microvolt = <2750000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vusb_reg: vusb {
-				regulator-always-on;
-			};
-
-			gpo2_reg: gpo2 { };
-
-			gpo3_reg: gpo3 { };
-
-			gpo4_reg: gpo4 { };
-
-			pwgt2spi_reg: pwgt2spi {
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	max-frequency = <50000000>;
-	bus-width = <1>;
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	cap-sdio-irq;
-	wakeup-source;
-	keep-power-in-suspend;
-	max-frequency = <50000000>;
-	no-1-8-v;
-	non-removable;
-	vmmc-supply = <&gpo4_reg>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	phy-supply = <&gpo3_reg>;
-	/* Pins shared with LCD2, keep status disabled */
-};
-
-&i2c2 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	clock-frequency = <400000>;
-	scl-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	mma7455l@1d {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mma7455l>;
-		compatible = "fsl,mma7455l";
-		reg = <0x1d>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi_wide";
-	disable-over-current;
-	vbus-supply = <&swbst_reg>;
-	/* Device role is not known, keep status disabled */
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim>;
-	status = "okay";
-
-	lan9221: ethernet@5,0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lan9221>;
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		reg = <5 0x00000000 0x1000>;
-		fsl,weim-cs-timing = <
-			0x00420081 0x00000000
-			0x32260000 0x00000000
-			0x72080f00 0x00000000
-		>;
-		clocks = <&clks IMX5_CLK_DUMMY>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
-		phy-mode = "mii";
-		reg-io-width = <2>;
-		smsc,irq-push-pull;
-		vdd33a-supply = <&gpo2_reg>;
-		vddvario-supply = <&gpo2_reg>;
-	};
-};
-
-&iomuxc {
-	imx51-digi-connectcore-som {
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CLK__SD1_CLK		0x400021d5
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x400020d5
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
-				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
-				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
-				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
-				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
-				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
-				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
-				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
-				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
-				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
-				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
-				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
-				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
-				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
-				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
-				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
-				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
-				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
-				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
-				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
-				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_2__I2C2_SCL		0x400001ed
-				MX51_PAD_GPIO1_3__I2C2_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_i2c2_gpio: i2c2gpiogrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_2__GPIO1_2		0x400001ed
-				MX51_PAD_GPIO1_3__GPIO1_3		0x400001ed
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX51_PAD_NANDF_D0__NANDF_D0		0x80000000
-				MX51_PAD_NANDF_D1__NANDF_D1		0x80000000
-				MX51_PAD_NANDF_D2__NANDF_D2		0x80000000
-				MX51_PAD_NANDF_D3__NANDF_D3		0x80000000
-				MX51_PAD_NANDF_D4__NANDF_D4		0x80000000
-				MX51_PAD_NANDF_D5__NANDF_D5		0x80000000
-				MX51_PAD_NANDF_D6__NANDF_D6		0x80000000
-				MX51_PAD_NANDF_D7__NANDF_D7		0x80000000
-				MX51_PAD_NANDF_ALE__NANDF_ALE		0x80000000
-				MX51_PAD_NANDF_CLE__NANDF_CLE		0x80000000
-				MX51_PAD_NANDF_RE_B__NANDF_RE_B		0x80000000
-				MX51_PAD_NANDF_WE_B__NANDF_WE_B		0x80000000
-				MX51_PAD_NANDF_WP_B__NANDF_WP_B		0x80000000
-				MX51_PAD_NANDF_CS0__NANDF_CS0		0x80000000
-				MX51_PAD_NANDF_RB0__NANDF_RB0		0x80000000
-			>;
-		};
-
-		pinctrl_lan9221: lan9221grp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_9__GPIO1_9		0xe5 /* IRQ */
-			>;
-		};
-
-		pinctrl_mc13892: mc13892grp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_5__GPIO1_5		0xe5 /* IRQ */
-			>;
-		};
-
-		pinctrl_mma7455l: mma7455lgrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_7__GPIO1_7		0xe5 /* IRQ1 */
-				MX51_PAD_GPIO1_6__GPIO1_6		0xe5 /* IRQ2 */
-			>;
-		};
-
-		pinctrl_weim: weimgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_DA0__EIM_DA0		0x80000000
-				MX51_PAD_EIM_DA1__EIM_DA1		0x80000000
-				MX51_PAD_EIM_DA2__EIM_DA2		0x80000000
-				MX51_PAD_EIM_DA3__EIM_DA3		0x80000000
-				MX51_PAD_EIM_DA4__EIM_DA4		0x80000000
-				MX51_PAD_EIM_DA5__EIM_DA5		0x80000000
-				MX51_PAD_EIM_DA6__EIM_DA6		0x80000000
-				MX51_PAD_EIM_DA7__EIM_DA7		0x80000000
-				MX51_PAD_EIM_DA8__EIM_DA8		0x80000000
-				MX51_PAD_EIM_DA9__EIM_DA9		0x80000000
-				MX51_PAD_EIM_DA10__EIM_DA10		0x80000000
-				MX51_PAD_EIM_DA11__EIM_DA11		0x80000000
-				MX51_PAD_EIM_DA12__EIM_DA12		0x80000000
-				MX51_PAD_EIM_DA13__EIM_DA13		0x80000000
-				MX51_PAD_EIM_DA14__EIM_DA14		0x80000000
-				MX51_PAD_EIM_DA15__EIM_DA15		0x80000000
-				MX51_PAD_EIM_A16__EIM_A16		0x80000000
-				MX51_PAD_EIM_A17__EIM_A17		0x80000000
-				MX51_PAD_EIM_A18__EIM_A18		0x80000000
-				MX51_PAD_EIM_A19__EIM_A19		0x80000000
-				MX51_PAD_EIM_A20__EIM_A20		0x80000000
-				MX51_PAD_EIM_A21__EIM_A21		0x80000000
-				MX51_PAD_EIM_A22__EIM_A22		0x80000000
-				MX51_PAD_EIM_A23__EIM_A23		0x80000000
-				MX51_PAD_EIM_A24__EIM_A24		0x80000000
-				MX51_PAD_EIM_A25__EIM_A25		0x80000000
-				MX51_PAD_EIM_A26__EIM_A26		0x80000000
-				MX51_PAD_EIM_A27__EIM_A27		0x80000000
-				MX51_PAD_EIM_D16__EIM_D16		0x80000000
-				MX51_PAD_EIM_D17__EIM_D17		0x80000000
-				MX51_PAD_EIM_D18__EIM_D18		0x80000000
-				MX51_PAD_EIM_D19__EIM_D19		0x80000000
-				MX51_PAD_EIM_D20__EIM_D20		0x80000000
-				MX51_PAD_EIM_D21__EIM_D21		0x80000000
-				MX51_PAD_EIM_D22__EIM_D22		0x80000000
-				MX51_PAD_EIM_D23__EIM_D23		0x80000000
-				MX51_PAD_EIM_D24__EIM_D24		0x80000000
-				MX51_PAD_EIM_D25__EIM_D25		0x80000000
-				MX51_PAD_EIM_D26__EIM_D26		0x80000000
-				MX51_PAD_EIM_D27__EIM_D27		0x80000000
-				MX51_PAD_EIM_D28__EIM_D28		0x80000000
-				MX51_PAD_EIM_D29__EIM_D29		0x80000000
-				MX51_PAD_EIM_D30__EIM_D30		0x80000000
-				MX51_PAD_EIM_D31__EIM_D31		0x80000000
-				MX51_PAD_EIM_OE__EIM_OE			0x80000000
-				MX51_PAD_EIM_DTACK__EIM_DTACK		0x80000000
-				MX51_PAD_EIM_LBA__EIM_LBA		0x80000000
-				MX51_PAD_EIM_CS5__EIM_CS5		0x80000000 /* CS5 */
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
deleted file mode 100644
index c2a929ba8ceb..000000000000
--- a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-#include "imx51.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX51";
-	compatible = "eukrea,cpuimx51", "fsl,imx51";
-
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0x10000000>; /* 256M */
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	tsc2007: tsc2007@49 {
-		compatible = "ti,tsc2007";
-		gpios = <&gpio4 0 1>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <0x0 0x8>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007_1>;
-		reg = <0x49>;
-		ti,x-plate-ohms = <180>;
-	};
-};
-
-&iomuxc {
-	imx51-eukrea {
-		pinctrl_tsc2007_1: tsc2007grp-1 {
-			fsl,pins = <
-				MX51_PAD_GPIO_NAND__GPIO_NAND 0x1f5
-				MX51_PAD_NANDF_D8__GPIO4_0 0x1f5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
-				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
-				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
-				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
-				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
-				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
-				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
-				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
-				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
-				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
-				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
-				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
-				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
-				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
-				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
-				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__I2C1_SCL		0x400001ed
-				MX51_PAD_SD2_CLK__I2C1_SDA		0x400001ed
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
deleted file mode 100644
index b6d931e96a8f..000000000000
--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
+++ /dev/null
@@ -1,274 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-/dts-v1/;
-#include "imx51-eukrea-cpuimx51.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Eukrea CPUIMX51";
-	compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
-
-	clocks {
-		clk24M: can_clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys_1>;
-
-		button-1 {
-			label = "BP1";
-			gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-			linux,code = <256>;
-			wakeup-source;
-			linux,input-type = <1>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpioled>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_can: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "CAN_RST";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <20000>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "eukrea,asoc-tlv320";
-		eukrea,model = "imx51-eukrea-tlv320aic23";
-		ssi-controller = <&ssi2>;
-		fsl,mux-int-port = <2>;
-		fsl,mux-ext-port = <3>;
-	};
-
-	usbphy1: usbphy1 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-		#phy-cells = <0>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
-	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	can0: can@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can>;
-		compatible = "microchip,mcp2515";
-		reg = <0>;
-		clocks = <&clk24M>;
-		spi-max-frequency = <10000000>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		vdd-supply = <&reg_can>;
-	};
-};
-
-&i2c1 {
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&iomuxc {
-	imx51-eukrea {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
-				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
-				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
-				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
-			>;
-		};
-
-
-		pinctrl_can: cangrp {
-			fsl,pins = <
-				MX51_PAD_CSI2_PIXCLK__GPIO4_15		0x80000000	/* nReset */
-				MX51_PAD_GPIO1_1__GPIO1_1		0x80000000	/* IRQ */
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-				MX51_PAD_CSPI1_SS0__GPIO4_24		0x80000000 	/* CS0 */
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
-				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3_rtscts: uart3rtsctsgrp {
-			fsl,pins = <
-				MX51_PAD_KEY_COL4__UART3_RTS		0x1c5
-				MX51_PAD_KEY_COL5__UART3_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_backlight_1: backlightgrp-1 {
-			fsl,pins = <
-				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1f5
-			>;
-		};
-
-		pinctrl_esdhc1_cd: esdhc1_cd {
-			fsl,pins = <
-				MX51_PAD_GPIO1_0__GPIO1_0 0xd5
-			>;
-		};
-
-		pinctrl_gpiokeys_1: gpiokeysgrp-1 {
-			fsl,pins = <
-				MX51_PAD_NANDF_D9__GPIO3_31 0x1f5
-			>;
-		};
-
-		pinctrl_gpioled: gpioledgrp-1 {
-			fsl,pins = <
-				MX51_PAD_NANDF_D10__GPIO3_30 0x80000000
-			>;
-		};
-
-		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
-			fsl,pins = <
-				MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX51_PAD_USBH1_CLK__USBH1_CLK     0x1e5
-				MX51_PAD_USBH1_DIR__USBH1_DIR     0x1e5
-				MX51_PAD_USBH1_NXT__USBH1_NXT     0x1e5
-				MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
-				MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
-				MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
-				MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
-				MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
-				MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
-				MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
-				MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
-				MX51_PAD_USBH1_STP__USBH1_STP     0x1e5
-			>;
-		};
-
-		pinctrl_usbh1_vbus: usbh1-vbusgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_CS3__GPIO2_28 0x1f5
-			>;
-		};
-	};
-};
-
-&ssi2 {
-	codec-handle = <&tlv320aic23>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	fsl,usbphy = <&usbphy1>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "otg";
-	phy_type = "utmi_wide";
-	status = "okay";
-};
-
-&usbphy0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1_vbus>;
-	reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
deleted file mode 100644
index 6208fbb2e741..000000000000
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "imx53.dtsi"
-
-/ {
-	model = "Freescale i.MX53 Automotive Reference Design Board";
-	compatible = "fsl,imx53-ard", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x40000000>;
-	};
-
-	eim-cs1@f4000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,eim-bus", "simple-bus";
-		reg = <0xf4000000 0x3ff0000>;
-		ranges;
-
-		ethernet@f4000000 {
-			compatible = "smsc,lan9220", "smsc,lan9115";
-			reg = <0xf4000000 0x2000000>;
-			phy-mode = "mii";
-			interrupt-parent = <&gpio2>;
-			interrupts = <31 0x8>;
-			reg-io-width = <4>;
-			/*
-			 * VDD33A and VDDVARIO of LAN9220 are supplied by
-			 * SW4_3V3 of LTC3589.  Before the regulator driver
-			 * for this PMIC is available, we use a fixed dummy
-			 * 3V3 regulator to get LAN9220 driver probing work.
-			 */
-			vdd33a-supply = <&reg_3p3v>;
-			vddvario-supply = <&reg_3p3v>;
-			smsc,irq-push-pull;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		home {
-			label = "Home";
-			gpios = <&gpio5 10 0>;
-			linux,code = <KEY_HOME>;
-			wakeup-source;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio5 11 0>;
-			linux,code = <KEY_BACK>;
-			wakeup-source;
-		};
-
-		program {
-			label = "Program";
-			gpios = <&gpio5 12 0>;
-			linux,code = <KEY_PROGRAM >;
-			wakeup-source;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio5 13 0>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio4 0 0>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-ard {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_1__GPIO1_1             0x80000000
-				MX53_PAD_GPIO_9__GPIO1_9             0x80000000
-				MX53_PAD_EIM_EB3__GPIO2_31           0x80000000
-				MX53_PAD_GPIO_10__GPIO4_0            0x80000000
-				MX53_PAD_DISP0_DAT16__GPIO5_10	     0x80000000
-				MX53_PAD_DISP0_DAT17__GPIO5_11       0x80000000
-				MX53_PAD_DISP0_DAT18__GPIO5_12       0x80000000
-				MX53_PAD_DISP0_DAT19__GPIO5_13       0x80000000
-				MX53_PAD_EIM_D16__EMI_WEIM_D_16      0x80000000
-				MX53_PAD_EIM_D17__EMI_WEIM_D_17      0x80000000
-				MX53_PAD_EIM_D18__EMI_WEIM_D_18      0x80000000
-				MX53_PAD_EIM_D19__EMI_WEIM_D_19      0x80000000
-				MX53_PAD_EIM_D20__EMI_WEIM_D_20      0x80000000
-				MX53_PAD_EIM_D21__EMI_WEIM_D_21      0x80000000
-				MX53_PAD_EIM_D22__EMI_WEIM_D_22      0x80000000
-				MX53_PAD_EIM_D23__EMI_WEIM_D_23      0x80000000
-				MX53_PAD_EIM_D24__EMI_WEIM_D_24      0x80000000
-				MX53_PAD_EIM_D25__EMI_WEIM_D_25      0x80000000
-				MX53_PAD_EIM_D26__EMI_WEIM_D_26      0x80000000
-				MX53_PAD_EIM_D27__EMI_WEIM_D_27      0x80000000
-				MX53_PAD_EIM_D28__EMI_WEIM_D_28      0x80000000
-				MX53_PAD_EIM_D29__EMI_WEIM_D_29      0x80000000
-				MX53_PAD_EIM_D30__EMI_WEIM_D_30      0x80000000
-				MX53_PAD_EIM_D31__EMI_WEIM_D_31      0x80000000
-				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x80000000
-				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x80000000
-				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x80000000
-				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x80000000
-				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x80000000
-				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x80000000
-				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x80000000
-				MX53_PAD_EIM_OE__EMI_WEIM_OE	     0x80000000
-				MX53_PAD_EIM_RW__EMI_WEIM_RW	     0x80000000
-				MX53_PAD_EIM_CS1__EMI_WEIM_CS_1	     0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_PATA_DATA8__ESDHC1_DAT4	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC1_DAT5	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC1_DAT6	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC1_DAT7	0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-kp-ddc.dts b/arch/arm/boot/dts/imx53-kp-ddc.dts
deleted file mode 100644
index 0e7f071fd10e..000000000000
--- a/arch/arm/boot/dts/imx53-kp-ddc.dts
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2018
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- */
-
-/dts-v1/;
-#include "imx53-kp.dtsi"
-
-/ {
-	model = "K+P imx53 DDC";
-	compatible = "kiebackpeter,imx53-ddc", "fsl,imx53";
-
-	backlight_lcd: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
-		power-supply = <&reg_backlight>;
-		brightness-levels = <0 24 28 32 36
-				     40 44 48 52 56
-				     60 64 68 72 76
-				     80 84 88 92 96 100>;
-		default-brightness-level = <20>;
-	};
-
-	lcd_display: display {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp>;
-
-		port@0 {
-			reg = <0>;
-
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	lcd_panel: lcd-panel {
-		compatible = "koe,tx14d24vm1bpa";
-		backlight = <&backlight_lcd>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	reg_backlight: regulator-backlight {
-		compatible = "regulator-fixed";
-		regulator-name = "backlight-supply";
-		regulator-min-microvolt = <15000000>;
-		regulator-max-microvolt = <15000000>;
-		regulator-always-on;
-	};
-};
-
-&fec {
-	status = "okay";
-};
-
-&i2c3 {
-	adc@48 {
-		compatible = "ti,ads1015";
-		reg = <0x48>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@4 {
-			reg = <4>;
-			ti,gain = <2>;
-			ti,datarate = <4>;
-		};
-
-		channel@6 {
-			reg = <6>;
-			ti,gain = <2>;
-			ti,datarate = <4>;
-		};
-	};
-
-	gpio-expander2@21 {
-		compatible = "nxp,pcf8574";
-		reg = <0x21>;
-		interrupts = <109>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-};
-
-&iomuxc {
-	imx53-kp-ddc {
-		pinctrl_disp: dispgrp {
-			fsl,pins = <
-				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK      0x4
-				MX53_PAD_EIM_DA10__IPU_DI1_PIN15        0x4
-				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0       0x4
-				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1       0x4
-				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2       0x4
-				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3       0x4
-				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4       0x4
-				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5       0x4
-				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6       0x4
-				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7       0x4
-				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8       0x4
-				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9       0x4
-				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10      0x4
-				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11      0x4
-				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12      0x4
-				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13      0x4
-				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14      0x4
-				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15      0x4
-				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16      0x4
-				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17      0x4
-				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18      0x4
-				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19      0x4
-				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20      0x4
-				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21      0x4
-				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22      0x4
-				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23      0x4
-				MX53_PAD_GPIO_1__PWM2_PWMO 0x4
-			>;
-		};
-	};
-};
-
-&ipu_di1_disp1 {
-	remote-endpoint = <&display1_in>;
-};
-
-&pmic {
-	fsl,mc13xxx-uses-touch;
-};
diff --git a/arch/arm/boot/dts/imx53-kp.dtsi b/arch/arm/boot/dts/imx53-kp.dtsi
deleted file mode 100644
index 4508f34139a0..000000000000
--- a/arch/arm/boot/dts/imx53-kp.dtsi
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2018
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- */
-
-/dts-v1/;
-#include "imx53-tqma53.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	buzzer {
-		compatible = "pwm-beeper";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_buzzer>;
-		pwms = <&pwm1 0 500000>;
-	};
-
-	gpio-buttons {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiobuttons>;
-
-		button-kalt {
-			label = "Kaltstart";
-			linux,code = <KEY_F6>;
-			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-		};
-
-		button-pwr {
-			label = "PowerFailInterrupt";
-			linux,code = <KEY_F7>;
-			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-bus {
-			label = "bus";
-			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
-			default-state = "off";
-		};
-
-		led-error {
-			label = "error";
-			gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
-			default-state = "off";
-		};
-
-		led-flash {
-			label = "flash";
-			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-
-	gpio-expander1@22 {
-		compatible = "nxp,pcf8574";
-		reg = <0x22>;
-		interrupts = <109>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kp_common>;
-
-	imx53-kp-common {
-		pinctrl_buzzer: buzzergrp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA3__PWM1_PWMO 0x1e4
-			>;
-		};
-
-		pinctrl_gpiobuttons: gpiobuttonsgrp {
-			fsl,pins = <
-				MX53_PAD_EIM_RW__GPIO2_26 0x1e4
-				MX53_PAD_EIM_D22__GPIO3_22 0x1e4
-			>;
-		};
-
-		pinctrl_kp_common: kpcommongrp {
-			fsl,pins = <
-				MX53_PAD_EIM_CS0__GPIO2_23 0x1e4
-				MX53_PAD_GPIO_19__GPIO4_5  0x1e4
-				MX53_PAD_PATA_DATA6__GPIO2_6 0x1e4
-				MX53_PAD_PATA_DATA7__GPIO2_7 0xe0
-				MX53_PAD_CSI0_DAT14__GPIO6_0 0x1e4
-				MX53_PAD_CSI0_DAT16__GPIO6_2 0x1e4
-				MX53_PAD_CSI0_DAT18__GPIO6_4 0x1e4
-				MX53_PAD_EIM_D17__GPIO3_17 0x1e4
-				MX53_PAD_EIM_D18__GPIO3_18 0x1e4
-				MX53_PAD_EIM_D21__GPIO3_21 0x1e4
-				MX53_PAD_EIM_D29__GPIO3_29 0x1e4
-				MX53_PAD_EIM_DA11__GPIO3_11 0x1e4
-				MX53_PAD_EIM_DA13__GPIO3_13 0x1e4
-				MX53_PAD_EIM_DA14__GPIO3_14 0x1e4
-				MX53_PAD_SD1_DATA0__GPIO1_16 0x1e4
-				MX53_PAD_SD1_CMD__GPIO1_18 0x1e4
-				MX53_PAD_SD1_CLK__GPIO1_20 0x1e4
-			>;
-		};
-
-		pinctrl_leds: ledgrp {
-			fsl,pins = <
-				MX53_PAD_EIM_EB2__GPIO2_30 0x1d4
-				MX53_PAD_EIM_D28__GPIO3_28 0x1d4
-				MX53_PAD_EIM_WAIT__GPIO5_0 0x1d4
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1e4
-				MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1e4
-			>;
-		};
-	};
-};
-
-&pinctrl_uart1 {
-	fsl,pins = <
-		MX53_PAD_EIM_D23__GPIO3_23 0x1e4
-		MX53_PAD_EIM_EB3__GPIO2_31 0x1e4
-		MX53_PAD_EIM_D24__GPIO3_24 0x1e4
-		MX53_PAD_EIM_D25__GPIO3_25 0x1e4
-		MX53_PAD_EIM_D19__GPIO3_19 0x1e4
-		MX53_PAD_EIM_D20__GPIO3_20 0x1e4
-	>;
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbphy0 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi
deleted file mode 100644
index fe5e0d308e99..000000000000
--- a/arch/arm/boot/dts/imx53-m53.dtsi
+++ /dev/null
@@ -1,132 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Marek Vasut <marex@denx.de>
- */
-
-#include "imx53.dtsi"
-
-/ {
-	model = "Aries/DENX M53";
-	compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x20000000>,
-		      <0xb0000000 0x20000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p2v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-
-		reg_backlight: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "lcd-supply";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	touchscreen@41 {
-		compatible = "st,stmpe610";
-		reg = <0x41>;
-		id = <0>;
-		blocks = <0x5>;
-		interrupts = <6 0x0>;
-		interrupt-parent = <&gpio7>;
-		irq-trigger = <0x1>;
-
-		stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			st,sample-time = <4>;
-			st,mod-12b = <1>;
-			st,ref-sel = <0>;
-			st,adc-freq = <1>;
-			st,ave-ctrl = <3>;
-			st,touch-det-delay = <3>;
-			st,settling = <4>;
-			st,fraction-z = <7>;
-			st,i-drive = <1>;
-		};
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	rtc: rtc@68 {
-		compatible = "st,m41t62";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-m53evk {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
-				MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
-				MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__I2C2_SDA		0xc0000000
-				MX53_PAD_EIM_EB2__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
-				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
-				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
-				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
-				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
-				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
-				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
-				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
-				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
-				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
-				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
-				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
-				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
-				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
-				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
-			>;
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
deleted file mode 100644
index a1a6228d1aa6..000000000000
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ /dev/null
@@ -1,371 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx53-m53.dtsi"
-
-/ {
-	model = "Aries/DENX M53EVK";
-	compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53";
-
-	display1: disp1 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp1>;
-
-		display-timings {
-			800x480p60 {
-				native-mode;
-				clock-frequency = <31500000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <40>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				vback-porch = <33>;
-				vfront-porch = <9>;
-				vsync-len = <3>;
-				vsync-active = <1>;
-			};
-		};
-
-		port {
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp1>;
-			};
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 3000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		power-supply = <&reg_backlight>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio>;
-
-		user1 {
-			label = "user1";
-			gpios = <&gpio2 8 0>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		user2 {
-			label = "user2";
-			gpios = <&gpio2 9 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usbh1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 2 0>;
-		};
-
-		reg_usb_otg_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 4 0>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx53-m53evk-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-m53evk-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"Ext Spk", "LINE_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_3p2v>;
-		VDDIO-supply = <&reg_3p2v>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-m53evk {
-		pinctrl_usb: usbgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_2__GPIO1_2		0x80000000
-				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x80000000
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_4__GPIO1_4		0x000b0
-			>;
-		};
-
-		led_pin_gpio: led_gpio {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__GPIO2_8		0x80000000
-				MX53_PAD_PATA_DATA9__GPIO2_9		0x80000000
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x80000000
-				MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x80000000
-				MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x80000000
-				MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
-				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
-				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
-				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_ipu_disp1: ipudisp1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0	0x5
-				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1	0x5
-				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2	0x5
-				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3	0x5
-				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4	0x5
-				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5	0x5
-				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6	0x5
-				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7	0x5
-				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8	0x5
-				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9	0x5
-				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10	0x5
-				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11	0x5
-				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12	0x5
-				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13	0x5
-				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14	0x5
-				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15	0x5
-				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16	0x5
-				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17	0x5
-				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18	0x5
-				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19	0x5
-				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20	0x5
-				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21	0x5
-				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22	0x5
-				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23	0x5
-				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK	0x5
-				MX53_PAD_EIM_DA13__IPU_DI1_D0_CS	0x5
-				MX53_PAD_EIM_DA14__IPU_DI1_D1_CS	0x5
-				MX53_PAD_EIM_DA15__IPU_DI1_PIN1		0x5
-				MX53_PAD_EIM_DA11__IPU_DI1_PIN2		0x5
-				MX53_PAD_EIM_DA12__IPU_DI1_PIN3		0x5
-				MX53_PAD_EIM_A25__IPU_DI1_PIN12		0x5
-				MX53_PAD_EIM_DA10__IPU_DI1_PIN15	0x5
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX53_PAD_DISP0_DAT8__PWM1_PWMO		0x5
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-	};
-};
-
-&ipu_di1_disp1 {
-	remote-endpoint = <&display1_in>;
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb>;
-	vbus-supply = <&reg_usbh1_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "otg";
-	vbus-supply = <&reg_usb_otg_vbus>;
-	disable-over-current;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
deleted file mode 100644
index d5c68d1ea707..000000000000
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ /dev/null
@@ -1,517 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx53-m53.dtsi"
-
-/ {
-	model = "MENLO M53 EMBEDDED DEVICE";
-	compatible = "menlo,m53menlo", "fsl,imx53";
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pinctrl_power_button>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power button";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pinctrl_power_out>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		user1 {
-			label = "TestLed601";
-			gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-		};
-
-		user2 {
-			label = "TestLed602";
-			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		eth {
-			label = "EthLedYe";
-			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "netdev";
-		};
-	};
-
-	lvds-decoder {
-		compatible = "ti,ds90cf364a", "lvds-decoder";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				lvds_decoder_in: endpoint {
-					remote-endpoint = <&lvds0_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				lvds_decoder_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
-
-	panel {
-		compatible = "edt,etm0700g0dh6";
-		pinctrl-0 = <&pinctrl_display_gpio>;
-		pinctrl-names = "default";
-		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds_decoder_out>;
-			};
-		};
-	};
-
-	beeper {
-		compatible = "gpio-beeper";
-		pinctrl-0 = <&pinctrl_beeper>;
-		gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_usbh1_vbus: regulator-usbh1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 2 0>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>,
-			  <&clks IMX5_CLK_CKO1_PODF>,
-			  <&clks IMX5_CLK_CKO1>;
-	assigned-clock-parents = <&clks IMX5_CLK_AHB>;
-	assigned-clock-rates = <133333334>, <33333334>, <33333334>;
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio2 27 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	spidev@0 {
-		compatible = "menlo,m53cpld";
-		spi-max-frequency = <25000000>;
-		reg = <0>;
-	};
-
-	spidev@1 {
-		compatible = "menlo,m53cpld";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"TestPin_SV2_3", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"CPLD_JTAG_TDI", "CPLD_JTAG_TMS", "", "",
-		"", "CPLD_JTAG_TDO", "", "";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "CPLD_JTAG_TCK", "KBD_intK",
-		"CPLD_int", "CPLD_JTAG_internal", "CPLD_D[0]", "CPLD_D[1]",
-		"CPLD_D[2]", "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]",
-		"CPLD_D[6]", "CPLD_D[7]", "DISP_reset", "KBD_intI";
-};
-
-&gpio6 {
-	gpio-line-names =
-		"", "", "", "",
-		"CPLD_reset", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-&gpio7 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "USB-OTG_OverCurrent", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_edt_ft5x06>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
-		wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	dac@60 {
-		compatible = "microchip,mcp4725";
-		reg = <0x60>;
-	};
-};
-
-&i2c2 {
-	touchscreen@41 {
-		status = "disabled";
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-m53evk {
-		hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_19__CCM_CLKO		0x1e4
-				MX53_PAD_CSI0_DATA_EN__GPIO5_20		0x1e4
-				MX53_PAD_CSI0_DAT4__GPIO5_22		0x1e4
-				MX53_PAD_CSI0_DAT5__GPIO5_23		0x1c4
-				MX53_PAD_CSI0_DAT6__GPIO5_24		0x1e4
-				MX53_PAD_CSI0_DAT7__GPIO5_25		0x1e4
-				MX53_PAD_CSI0_DAT8__GPIO5_26		0x1e4
-				MX53_PAD_CSI0_DAT9__GPIO5_27		0x1c4
-				MX53_PAD_CSI0_DAT10__GPIO5_28		0x1e4
-				MX53_PAD_CSI0_DAT11__GPIO5_29		0x1e4
-				MX53_PAD_PATA_DATA11__GPIO2_11		0x1e4
-				MX53_PAD_EIM_D24__GPIO3_24		0x1e4
-				MX53_PAD_EIM_D25__GPIO3_25		0x1e4
-				MX53_PAD_EIM_D29__GPIO3_29		0x1e4
-				MX53_PAD_CSI0_PIXCLK__GPIO5_18		0x1e4
-				MX53_PAD_CSI0_VSYNC__GPIO5_21		0x1e4
-				MX53_PAD_CSI0_DAT18__GPIO6_4		0x1c4
-				MX53_PAD_PATA_DATA8__GPIO2_8		0x1e4
-			>;
-		};
-
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT15__GPIO6_1		0x1c4
-				MX53_PAD_CSI0_DAT16__GPIO6_2		0x1c4
-			>;
-		};
-
-		pinctrl_beeper: beepergrp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT17__GPIO6_3		0x1c4
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__CAN1_TXCAN		0x1c4
-				MX53_PAD_GPIO_8__CAN1_RXCAN		0x1c4
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x1e4
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x1c4
-			>;
-		};
-
-		pinctrl_display_gpio: display-gpiogrp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT12__GPIO5_30		0x1c4 /* Reset */
-				MX53_PAD_CSI0_MCLK__GPIO5_19		0x1e4 /* Int-K */
-				MX53_PAD_CSI0_DAT13__GPIO5_31		0x1c4 /* Int-I */
-
-				MX53_PAD_CSI0_DAT14__GPIO6_0		0x1c4 /* Power down */
-			>;
-		};
-
-		pinctrl_edt_ft5x06: edt-ft5x06grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA9__GPIO2_9		0x1e4 /* Reset */
-				MX53_PAD_CSI0_DAT19__GPIO6_5		0x1c4 /* Interrupt */
-				MX53_PAD_PATA_DATA10__GPIO2_10		0x1e4 /* Wake */
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX53_PAD_EIM_CS0__ECSPI2_SCLK		0xe4
-				MX53_PAD_EIM_OE__ECSPI2_MISO		0xe4
-				MX53_PAD_EIM_CS1__ECSPI2_MOSI		0xe4
-				MX53_PAD_EIM_RW__GPIO2_26		0xe4
-				MX53_PAD_EIM_LBA__GPIO2_27		0xe4
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1e4
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1e4
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1e4
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1e4
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1e4
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1e4
-				MX53_PAD_GPIO_1__GPIO1_1		0x1c4
-				MX53_PAD_GPIO_9__GPIO1_9		0x1e4
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x1e4
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1e4
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x1e4
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x1e4
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x1e4
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x1e4
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x1e4
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x1c4
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x1e4
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x1e4
-				MX53_PAD_PATA_DA_1__GPIO7_7		0x1e4
-				MX53_PAD_EIM_EB3__GPIO2_31		0x1e4
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
-				MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
-				MX53_PAD_GPIO_5__I2C3_SCL		0x400001e4
-			>;
-		};
-
-		pinctrl_lvds0: lvds0grp {
-			/* LVDS pins only have pin mux configuration */
-			fsl,pins = <
-				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
-				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
-				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
-				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
-				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
-			>;
-		};
-
-		pinctrl_power_button: powerbutgrp {
-			fsl,pins = <
-				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
-			>;
-		};
-
-		pinctrl_power_out: poweroutgrp {
-			fsl,pins = <
-				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-				MX53_PAD_PATA_IORDY__UART1_RTS		0x1e4
-				MX53_PAD_PATA_RESET_B__UART1_CTS	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DIOR__UART2_RTS		0x1e4
-				MX53_PAD_PATA_INTRQ__UART2_CTS		0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-
-		pinctrl_usb: usbgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_2__GPIO1_2		0x1c4
-				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x1c4
-				MX53_PAD_GPIO_4__GPIO1_4		0x1c4
-				MX53_PAD_GPIO_18__GPIO7_13		0x1c4
-			>;
-		};
-	};
-};
-
-&ldb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lvds0>;
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		reg = <0>;
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		port@2 {
-			reg = <2>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&lvds_decoder_in>;
-			};
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	linux,rs485-enabled-at-boot-time;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb>;
-	vbus-supply = <&reg_usbh1_vbus>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
deleted file mode 100644
index 09eee0dd44c1..000000000000
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ /dev/null
@@ -1,249 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
- */
-
-/dts-v1/;
-#include "imx53-tqma53.dtsi"
-
-/ {
-	model = "TQ MBa53 starter kit";
-	compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
-		brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
-		default-brightness-level = <10>;
-		enable-gpios = <&gpio7 7 0>;
-		power-supply = <&reg_backlight>;
-	};
-
-	disp1: disp1 {
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp1_1>;
-		interface-pix-fmt = "rgb24";
-		status = "disabled";
-
-		port {
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp1>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_backlight: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "lcd-supply";
-			gpio = <&gpio2 5 0>;
-			startup-delay-us = <5000>;
-		};
-
-		reg_3p2v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "tq,imx53-mba53-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-mba53-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <5>;
-	};
-};
-
-&ldb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lvds1_1>;
-	status = "disabled";
-};
-
-&iomuxc {
-	lvds1 {
-		pinctrl_lvds1_1: lvds1-grp1 {
-			fsl,pins = <
-				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
-				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
-				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
-				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
-				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
-			>;
-		};
-
-		pinctrl_lvds1_2: lvds1-grp2 {
-			fsl,pins = <
-				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
-				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
-				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
-				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
-				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
-			>;
-		};
-	};
-
-	disp1 {
-		pinctrl_disp1_1: disp1-grp1 {
-			fsl,pins = <
-				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */
-				MX53_PAD_EIM_DA10__IPU_DI1_PIN15   0x80000000 /* DISP1_DRDY */
-				MX53_PAD_EIM_D23__IPU_DI1_PIN2     0x80000000 /* DISP1_HSYNC */
-				MX53_PAD_EIM_EB3__IPU_DI1_PIN3     0x80000000 /* DISP1_VSYNC */
-				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000
-				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000
-				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000
-				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000
-				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000
-				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000
-				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000
-				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000
-				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000
-				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000
-				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000
-				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000
-				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000
-				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000
-				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9  0x80000000
-				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8  0x80000000
-				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7  0x80000000
-				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6  0x80000000
-				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5  0x80000000
-				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4  0x80000000
-				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3  0x80000000
-				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2  0x80000000
-				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1  0x80000000
-				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0  0x80000000
-			>;
-		};
-	};
-
-	tve {
-		pinctrl_vga_sync_1: vgasync-grp1 {
-			fsl,pins = <
-				/* VGA_VSYNC, HSYNC with max drive strength */
-				MX53_PAD_EIM_CS1__IPU_DI1_PIN6	   0xe6
-				MX53_PAD_EIM_DA15__IPU_DI1_PIN4	   0xe6
-			>;
-		};
-	};
-};
-
-&ipu_di1_disp1 {
-	remote-endpoint = <&display1_in>;
-};
-
-&cspi {
-	status = "okay";
-};
-
-&audmux {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-};
-
-&i2c2 {
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-		VDDA-supply = <&reg_3p2v>;
-		VDDIO-supply = <&reg_3p2v>;
-	};
-
-	expander: pca9554@20 {
-		compatible = "pca9554";
-		reg = <0x20>;
-		interrupts = <109>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	sensor2: lm75@49 {
-		compatible = "lm75";
-		reg = <0x49>;
-	};
-};
-
-&fec {
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&esdhc2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&ecspi1 {
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&tve {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_vga_sync_1>;
-	ddc-i2c-bus = <&i2c3>;
-	fsl,tve-mode = "vga";
-	fsl,hsync-pin = <4>;
-	fsl,vsync-pin = <6>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
deleted file mode 100644
index fe4244044a0f..000000000000
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ /dev/null
@@ -1,387 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-#include "imx53.dtsi"
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x20000000>,
-		      <0xb0000000 0x20000000>;
-	};
-
-	display0: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp0>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-
-		port@0 {
-			reg = <0>;
-
-			display0_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			display_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio7_7>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio7 7 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	panel {
-		compatible = "sii,43wvf1g";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p2v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-
-		reg_usb_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio7 8 0>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx53-qsb-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-qsb-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <5>;
-	};
-};
-
-&cpu0 {
-	/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
-	operating-points = <
-		/* kHz   uV */
-		166666  850000
-		400000  900000
-		800000  1050000
-		1000000 1200000
-	>;
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ipu_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&esdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3>;
-	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-qsb {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
-				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
-				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
-				MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
-				MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
-				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
-				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
-				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
-			>;
-		};
-
-		led_pin_gpio7_7: led_gpio7_7 {
-			fsl,pins = <
-				MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_codec: codecgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-				MX53_PAD_EIM_DA13__GPIO3_13		0xe4
-			>;
-		};
-
-		pinctrl_esdhc3: esdhc3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
-				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
-				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
-				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
-				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
-				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
-				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x4
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
-			>;
-		};
-
-		/* open drain */
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT8__I2C1_SDA		0x400001ec
-				MX53_PAD_CSI0_DAT9__I2C1_SCL		0x400001ec
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
-				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_ipu_disp0: ipudisp0grp {
-			fsl,pins = <
-				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
-				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
-				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
-				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
-				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
-				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
-				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
-				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
-				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
-				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
-				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
-				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
-				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
-				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
-				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
-				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
-				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
-				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
-				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
-				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
-				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
-				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
-				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
-				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
-				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
-				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
-				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
-				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
-			>;
-		};
-
-		pinctrl_vga_sync: vgasync-grp {
-			fsl,pins = <
-				/* VGA_HSYNC, VSYNC with max drive strength */
-				MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
-				MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
-				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
-			>;
-		};
-	};
-};
-
-&tve {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_vga_sync>;
-	ddc-i2c-bus = <&i2c2>;
-	fsl,tve-mode = "vga";
-	fsl,hsync-pin = <7>;	/* IPU DI1 PIN7 via EIM_OE */
-	fsl,vsync-pin = <8>;	/* IPU DI1 PIN8 via EIM_RW */
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_codec>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_3p2v>;
-		VDDIO-supply = <&reg_3p2v>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	accelerometer: mma8450@1c {
-		compatible = "fsl,mma8450";
-		reg = <0x1c>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&vpu {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
deleted file mode 100644
index 9be44e807188..000000000000
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ /dev/null
@@ -1,346 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "imx53.dtsi"
-
-/ {
-	model = "Freescale i.MX53 Smart Mobile Reference Design Board";
-	compatible = "fsl,imx53-smd", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x40000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio2 14 0>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio2 15 0>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	non-removable;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	zigbee: mc1323@0 {
-		compatible = "fsl,mc1323";
-		spi-max-frequency = <8000000>;
-		reg = <0>;
-	};
-
-	flash: m25p32@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p32", "st,m25p", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <1>;
-
-		partition@0 {
-			label = "U-Boot";
-			reg = <0x0 0x40000>;
-			read-only;
-		};
-
-		partition@40000 {
-			label = "Kernel";
-			reg = <0x40000 0x3c0000>;
-		};
-	};
-};
-
-&esdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3>;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-smd {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
-				MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
-				MX53_PAD_EIM_EB2__GPIO2_30     0x80000000
-				MX53_PAD_EIM_DA13__GPIO3_13    0x80000000
-				MX53_PAD_EIM_D19__GPIO3_19     0x80000000
-				MX53_PAD_KEY_ROW2__GPIO4_11    0x80000000
-				MX53_PAD_PATA_DA_0__GPIO7_6    0x80000000
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-			>;
-		};
-
-		pinctrl_esdhc3: esdhc3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
-				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
-				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
-				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
-				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
-				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
-				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT8__I2C1_SDA		0xc0000000
-				MX53_PAD_CSI0_DAT9__I2C1_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
-				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_ipu_csi0: ipucsi0grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12    0x1c4
-				MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13    0x1c4
-				MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14    0x1c4
-				MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15    0x1c4
-				MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16    0x1c4
-				MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17    0x1c4
-				MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18    0x1c4
-				MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19    0x1c4
-				MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1e4
-				MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC   0x1e4
-				MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC    0x1e4
-				MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1e4
-			>;
-		};
-
-		pinctrl_ov5642: ov5642grp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WP_B__GPIO6_9   0x1e4
-				MX53_PAD_NANDF_RB0__GPIO6_10   0x1e4
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
-				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-	};
-
-	magnetometer: mag3110@e {
-		compatible = "fsl,mag3110";
-		reg = <0x0e>;
-	};
-
-	touchkey: mpr121@5a {
-		compatible = "fsl,mpr121";
-		reg = <0x5a>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	accelerometer: mma8450@1c {
-		compatible = "fsl,mma8450";
-		reg = <0x1c>;
-	};
-
-	camera: ov5642@3c {
-		compatible = "ovti,ov5642";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5642>;
-		assigned-clocks = <&clks IMX5_CLK_SSI_EXT1_SEL>,
-				  <&clks IMX5_CLK_SSI_EXT1_COM_SEL>;
-		assigned-clock-parents = <&clks IMX5_CLK_PLL2_SW>,
-					 <&clks IMX5_CLK_SSI_EXT1_PODF>;
-		assigned-clock-rates = <0>, <24000000>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-		clock-names = "xclk";
-		DVDD-supply = <&ldo9_reg>;
-		AVDD-supply = <&ldo7_reg>;
-		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
-		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
-
-		port {
-			ov5642_to_ipu_csi0: endpoint {
-				remote-endpoint = <&ipu_csi0_from_parallel_sensor>;
-				bus-width = <8>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-
-	pmic: dialog@48 {
-		compatible = "dlg,da9053", "dlg,da9052";
-		reg = <0x48>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-
-		regulators {
-			ldo7_reg: ldo7 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3600000>;
-			};
-
-			ldo9_reg: ldo9 {
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <3650000>;
-			};
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ipu_csi0_from_parallel_sensor {
-	remote-endpoint = <&ov5642_to_ipu_csi0>;
-	data-shift = <12>; /* Lines 19:12 used */
-	hsync-active = <1>;
-	vsync-active = <1>;
-};
-
-&ipu_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu_csi0>;
-};
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
deleted file mode 100644
index 7e7f9f3b3906..000000000000
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ /dev/null
@@ -1,289 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
- */
-
-#include "imx53.dtsi"
-
-/ {
-	model = "TQ TQMa53";
-	compatible = "tq,tqma53", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x40000000>; /* Up to 1GiB */
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>,
-		    <&pinctrl_esdhc2_cdwp>;
-	vmmc-supply = <&reg_3p3v>;
-	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "disabled";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
-		   <&gpio3 24 GPIO_ACTIVE_LOW>, <&gpio3 25 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&esdhc3 { /* EMMC */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-tqma53 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
-				 MX53_PAD_PATA_DA_1__GPIO7_7     0x80000000 /* LCD_BLT_EN */
-				 MX53_PAD_PATA_DA_2__GPIO7_8     0x80000000 /* LCD_RESET */
-				 MX53_PAD_PATA_DATA5__GPIO2_5    0x80000000 /* LCD_POWER */
-				 MX53_PAD_PATA_DATA6__GPIO2_6    0x80000000 /* PMIC_INT */
-				 MX53_PAD_PATA_DATA14__GPIO2_14  0x80000000 /* CSI_RST */
-				 MX53_PAD_PATA_DATA15__GPIO2_15  0x80000000 /* CSI_PWDN */
-				 MX53_PAD_GPIO_19__GPIO4_5 	 0x80000000 /* #SYSTEM_DOWN */
-				 MX53_PAD_GPIO_3__GPIO1_3        0x80000000
-				 MX53_PAD_PATA_DA_0__GPIO7_6	 0x80000000 /* #PHY_RESET */
-				 MX53_PAD_GPIO_1__PWM2_PWMO	 0x80000000 /* LCD_CONTRAST */
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL2__CAN1_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW2__CAN1_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_cspi: cspigrp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__CSPI_MISO		0x1d5
-				MX53_PAD_SD1_CMD__CSPI_MOSI		0x1d5
-				MX53_PAD_SD1_CLK__CSPI_SCLK		0x1d5
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-			>;
-		};
-
-		pinctrl_esdhc2_cdwp: esdhc2cdwp {
-			fsl,pins = <
-				MX53_PAD_GPIO_4__GPIO1_4	0x80000000 /* SD2_CD */
-				MX53_PAD_GPIO_2__GPIO1_2	0x80000000 /* SD2_WP */
-			>;
-		};
-
-		pinctrl_esdhc3: esdhc3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
-				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
-				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
-				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
-				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
-				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
-				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
-				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
-				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-			>;
-		};
-	};
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "disabled";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "disabled";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "disabled";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "disabled";
-};
-
-&cspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi>;
-	cs-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>, <&gpio1 19 GPIO_ACTIVE_LOW>,
-		   <&gpio1 21 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: mc34708@8 {
-		compatible = "fsl,mc34708";
-		reg = <0x8>;
-		fsl,mc13xxx-uses-rtc;
-		interrupt-parent = <&gpio2>;
-		interrupts = <6 4>; /* PATA_DATA6, active high */
-	};
-
-	sensor1: lm75@48 {
-		compatible = "lm75";
-		reg = <0x48>;
-	};
-
-	eeprom: 24c64@50 {
-		compatible = "atmel,24c64";
-		pagesize = <32>;
-		reg = <0x50>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
deleted file mode 100644
index a7f77527269d..000000000000
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx53-tx53.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Ka-Ro electronics TX53 module (LCD)";
-	compatible = "karo,tx53", "fsl,imx53";
-
-	aliases {
-		display = &display;
-	};
-
-	display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rgb24_vga1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_3v3>;
-		brightness-levels = <
-			  0  1  2  3  4  5  6  7  8  9
-			 10 11 12 13 14 15 16 17 18 19
-			 20 21 22 23 24 25 26 27 28 29
-			 30 31 32 33 34 35 36 37 38 39
-			 40 41 42 43 44 45 46 47 48 49
-			 50 51 52 53 54 55 56 57 58 59
-			 60 61 62 63 64 65 66 67 68 69
-			 70 71 72 73 74 75 76 77 78 79
-			 80 81 82 83 84 85 86 87 88 89
-			 90 91 92 93 94 95 96 97 98 99
-			100
-		>;
-		default-brightness-level = <50>;
-	};
-
-	reg_lcd_pwr: regulator-lcd-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD POWER";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	reg_lcd_reset: regulator-lcd-reset {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD RESET";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_2v5>;
-		VDDIO-supply = <&reg_3v3>;
-		clocks = <&mclk>;
-	};
-
-	polytouch: edt-ft5x06@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-		wakeup-source;
-	};
-
-	touchscreen: tsc2007@48 {
-		compatible = "ti,tsc2007";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
-		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
-		ti,x-plate-ohms = <660>;
-		wakeup-source;
-	};
-};
-
-&iomuxc {
-	imx53-tx53-x03x {
-		pinctrl_edt_ft5x06_1: edt-ft5x06grp-1 {
-			fsl,pins = <
-				MX53_PAD_NANDF_CS2__GPIO6_15 0x1f0 /* Interrupt */
-				MX53_PAD_EIM_A16__GPIO2_22   0x04 /* Reset */
-				MX53_PAD_EIM_A17__GPIO2_21   0x04 /* Wake */
-			>;
-		};
-
-		pinctrl_kpp: kppgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_9__KPP_COL_6 0x1f4
-				MX53_PAD_GPIO_4__KPP_COL_7 0x1f4
-				MX53_PAD_KEY_COL2__KPP_COL_2 0x1f4
-				MX53_PAD_KEY_COL3__KPP_COL_3 0x1f4
-				MX53_PAD_GPIO_2__KPP_ROW_6 0x1f4
-				MX53_PAD_GPIO_5__KPP_ROW_7 0x1f4
-				MX53_PAD_KEY_ROW2__KPP_ROW_2 0x1f4
-				MX53_PAD_KEY_ROW3__KPP_ROW_3 0x1f4
-			>;
-		};
-
-		pinctrl_rgb24_vga1: rgb24-vgagrp1 {
-			fsl,pins = <
-				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK		0x5
-				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		0x5
-				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2			0x5
-				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3			0x5
-				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		0x5
-				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		0x5
-				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		0x5
-				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		0x5
-				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		0x5
-				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		0x5
-				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		0x5
-				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		0x5
-				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		0x5
-				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		0x5
-				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		0x5
-				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		0x5
-				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		0x5
-				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		0x5
-				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		0x5
-				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		0x5
-				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		0x5
-				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		0x5
-				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		0x5
-				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		0x5
-				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		0x5
-				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		0x5
-				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		0x5
-				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		0x5
-			>;
-		};
-
-		pinctrl_tsc2007: tsc2007grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D26__GPIO3_26 0x1f0 /* Interrupt */
-			>;
-		};
-	};
-};
-
-&ipu_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	/* sample keymap */
-	/* row/col 0,1 are mapped to KPP row/col 6,7 */
-	linux,keymap = <
-		MATRIX_KEY(6, 6, KEY_POWER)
-		MATRIX_KEY(6, 7, KEY_KP0)
-		MATRIX_KEY(6, 2, KEY_KP1)
-		MATRIX_KEY(6, 3, KEY_KP2)
-		MATRIX_KEY(7, 6, KEY_KP3)
-		MATRIX_KEY(7, 7, KEY_KP4)
-		MATRIX_KEY(7, 2, KEY_KP5)
-		MATRIX_KEY(7, 3, KEY_KP6)
-		MATRIX_KEY(2, 6, KEY_KP7)
-		MATRIX_KEY(2, 7, KEY_KP8)
-		MATRIX_KEY(2, 2, KEY_KP9)
-	>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts
deleted file mode 100644
index 6cdf2082c742..000000000000
--- a/arch/arm/boot/dts/imx53-tx53-x13x.dts
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx53-tx53.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Ka-Ro electronics TX53 module (LVDS)";
-	compatible = "karo,tx53", "fsl,imx53";
-
-	aliases {
-		display = &lvds0;
-		lvds0 = &lvds0;
-		lvds1 = &lvds1;
-	};
-
-	backlight0: backlight0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_3v3>;
-		brightness-levels = <
-			  0  1  2  3  4  5  6  7  8  9
-			 10 11 12 13 14 15 16 17 18 19
-			 20 21 22 23 24 25 26 27 28 29
-			 30 31 32 33 34 35 36 37 38 39
-			 40 41 42 43 44 45 46 47 48 49
-			 50 51 52 53 54 55 56 57 58 59
-			 60 61 62 63 64 65 66 67 68 69
-			 70 71 72 73 74 75 76 77 78 79
-			 80 81 82 83 84 85 86 87 88 89
-			 90 91 92 93 94 95 96 97 98 99
-			100
-		>;
-		default-brightness-level = <50>;
-	};
-
-	backlight1: backlight1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 0>;
-		power-supply = <&reg_3v3>;
-		brightness-levels = <
-			  0  1  2  3  4  5  6  7  8  9
-			 10 11 12 13 14 15 16 17 18 19
-			 20 21 22 23 24 25 26 27 28 29
-			 30 31 32 33 34 35 36 37 38 39
-			 40 41 42 43 44 45 46 47 48 49
-			 50 51 52 53 54 55 56 57 58 59
-			 60 61 62 63 64 65 66 67 68 69
-			 70 71 72 73 74 75 76 77 78 79
-			 80 81 82 83 84 85 86 87 88 89
-			 90 91 92 93 94 95 96 97 98 99
-			100
-		>;
-		default-brightness-level = <50>;
-	};
-
-	reg_lcd_pwr0: regulator-lvds0-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "LVDS0 POWER";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	reg_lcd_pwr1: regulator-lvds1-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "LVDS1 POWER";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_2v5>;
-		VDDIO-supply = <&reg_3v3>;
-		clocks = <&mclk>;
-	};
-};
-
-&iomuxc {
-	imx53-tx53-x13x {
-		pinctrl_lvds0: lvds0grp {
-			fsl,pins = <
-				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
-				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
-				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
-				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
-				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
-			>;
-		};
-
-		pinctrl_lvds1: lvds1grp {
-			fsl,pins = <
-				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
-				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
-				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
-				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
-				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <MX53_PAD_GPIO_9__PWM1_PWMO 0x04>;
-		};
-
-		pinctrl_eeti1: eeti1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D22__GPIO3_22 0x1f0 /* Interrupt */
-			>;
-		};
-
-		pinctrl_eeti2: eeti2grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D23__GPIO3_23 0x1f0 /* Interrupt */
-			>;
-		};
-	};
-};
-
-&ldb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lvds0 &pinctrl_lvds1>;
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds0_timing0>;
-
-			lvds0_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hsync-len = <60>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vsync-len = <10>;
-				vfront-porch = <7>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			lvds0_timing1: nl12880bc20 {
-				clock-frequency = <71000000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <50>;
-				hsync-len = <60>;
-				hfront-porch = <50>;
-				vback-porch = <5>;
-				vsync-len = <13>;
-				vfront-porch = <5>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-
-	lvds1: lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds1_timing0>;
-
-			lvds1_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hsync-len = <60>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vsync-len = <10>;
-				vfront-porch = <7>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
deleted file mode 100644
index 8712e9851465..000000000000
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ /dev/null
@@ -1,584 +0,0 @@
-/*
- * Copyright 2012-2017 <LW@KARO-electronics.de>
- * based on imx53-qsb.dts
- *   Copyright 2011 Freescale Semiconductor, Inc.
- *   Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "imx53.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Ka-Ro electronics TX53 module";
-	compatible = "karo,tx53", "fsl,imx53";
-
-	/* Will be filled by the bootloader */
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0>;
-	};
-
-	aliases {
-		can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
-		can1 = &can1;
-		ipu = &ipu;
-		reg-can-xcvr = &reg_can_xcvr;
-		usbh1 = &usbh1;
-		usbotg = &usbotg;
-	};
-
-	clocks {
-		ckih1 {
-			clock-frequency = <0>;
-		};
-	};
-
-	mclk: clock-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_key>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-			linux,code = <116>; /* KEY_POWER */
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_stk5led>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_2v5: regulator-2v5 {
-		compatible = "regulator-fixed";
-		regulator-name = "2V5";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_can_xcvr: regulator-can-xcvr {
-		compatible = "regulator-fixed";
-		regulator-name = "CAN XCVR";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can_xcvr>;
-		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_usbh1_vbus: regulator-usbh1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbh1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh1_vbus>;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usbotg_vbus: regulator-usbotg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbotg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg_vbus>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "karo,tx53-audio-sgtl5000", "fsl,imx-audio-sgtl5000";
-		model = "tx53-audio-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		/* '1' based port numbers according to datasheet names */
-		mux-int-port = <1>;
-		mux-ext-port = <5>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ssi1>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	cs-gpios = <
-		&gpio2 30 GPIO_ACTIVE_HIGH
-		&gpio3 19 GPIO_ACTIVE_HIGH
-	>;
-
-};
-
-&esdhc1 {
-	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	fsl,wp-controller;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	status = "okay";
-};
-
-&esdhc2 {
-	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-	fsl,wp-controller;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	phy-handle = <&phy0>;
-	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-			interrupt-parent = <&gpio2>;
-			interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-			device_type = "ethernet-phy";
-		};
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-0 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	rtc1: rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ds1339>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
-		trickle-resistor-ohms = <250>;
-		trickle-diode-disable;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-tx53 {
-		pinctrl_hog: hoggrp {
-			/* pins not in use by any device on the Starterkit board series */
-			fsl,pins = <
-				/* CMOS Sensor Interface */
-				MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4
-				MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4
-				MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4
-				MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4
-				MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4
-				MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4
-				MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4
-				MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4
-				MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4
-				MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4
-				MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4
-				MX53_PAD_GPIO_0__GPIO1_0 0x1f4
-				/* Module Specific Signal */
-				/* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */
-				/* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */
-				MX53_PAD_EIM_D29__GPIO3_29 0x1f4
-				MX53_PAD_EIM_EB3__GPIO2_31 0x1f4
-				/* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */
-				/* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */
-				MX53_PAD_EIM_A19__GPIO2_19 0x1f4
-				MX53_PAD_EIM_A20__GPIO2_18 0x1f4
-				MX53_PAD_EIM_A21__GPIO2_17 0x1f4
-				MX53_PAD_EIM_A22__GPIO2_16 0x1f4
-				MX53_PAD_EIM_A23__GPIO6_6 0x1f4
-				MX53_PAD_EIM_A24__GPIO5_4 0x1f4
-				MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4
-				MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4
-				MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4
-				MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4
-				/* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */
-				/* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */
-				MX53_PAD_GPIO_13__GPIO4_3 0x1f4
-				MX53_PAD_EIM_CS0__GPIO2_23 0x1f4
-				MX53_PAD_EIM_CS1__GPIO2_24 0x1f4
-				MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4
-				MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4
-				MX53_PAD_EIM_EB0__GPIO2_28 0x1f4
-				MX53_PAD_EIM_EB1__GPIO2_29 0x1f4
-				MX53_PAD_EIM_OE__GPIO2_25 0x1f4
-				MX53_PAD_EIM_LBA__GPIO2_27 0x1f4
-				MX53_PAD_EIM_RW__GPIO2_26 0x1f4
-				MX53_PAD_EIM_DA8__GPIO3_8 0x1f4
-				MX53_PAD_EIM_DA9__GPIO3_9 0x1f4
-				MX53_PAD_EIM_DA10__GPIO3_10 0x1f4
-				MX53_PAD_EIM_DA11__GPIO3_11 0x1f4
-				MX53_PAD_EIM_DA12__GPIO3_12 0x1f4
-				MX53_PAD_EIM_DA13__GPIO3_13 0x1f4
-				MX53_PAD_EIM_DA14__GPIO3_14 0x1f4
-				MX53_PAD_EIM_DA15__GPIO3_15 0x1f4
-				>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
-				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can_xcvr: can-xcvrgrp {
-			fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */
-		};
-
-		pinctrl_ds1339: ds1339grp {
-			fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_19__ECSPI1_RDY		0x80000000
-				MX53_PAD_EIM_EB2__ECSPI1_SS0		0x80000000
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-				MX53_PAD_EIM_D19__ECSPI1_SS1		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-				MX53_PAD_EIM_D24__GPIO3_24 0x1f0
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-				MX53_PAD_EIM_D25__GPIO3_25 0x1f0
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_gpio_key: gpio-keygrp {
-			fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
-				MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
-			>;
-		};
-
-		pinctrl_i2c1_gpio: i2c1-gpiogrp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__GPIO3_21		0x400001e6
-				MX53_PAD_EIM_D28__GPIO3_28		0x400001e6
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_3__I2C3_SCL		0x400001e4
-				MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
-			>;
-		};
-
-		pinctrl_i2c3_gpio: i2c3-gpiogrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_3__GPIO1_3		0x400001e6
-				MX53_PAD_GPIO_6__GPIO1_6		0x400001e6
-			>;
-		};
-
-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
-				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
-				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
-				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
-				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
-				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
-				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
-				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	0xa4
-				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	0xa4
-				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	0xa4
-				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	0xa4
-				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	0xa4
-				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	0xa4
-				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	0xa4
-				MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	0xa4
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_1__PWM2_PWMO		0x80000000
-			>;
-		};
-
-		pinctrl_ssi1: ssi1grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_ssi2: ssi2grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC	0x80000000
-				MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD	0x80000000
-				MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS	0x80000000
-				MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD	0x80000000
-				MX53_PAD_EIM_D27__GPIO3_27 0x1f0
-			>;
-		};
-
-		pinctrl_stk5led: stk5ledgrp {
-			fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-				MX53_PAD_PATA_RESET_B__UART1_CTS	0x1c5
-				MX53_PAD_PATA_IORDY__UART1_RTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1c5
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1c5
-				MX53_PAD_PATA_DIOR__UART2_RTS		0x1c5
-				MX53_PAD_PATA_INTRQ__UART2_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */
-			>;
-		};
-
-		pinctrl_usbh1_vbus: usbh1-vbusgrp {
-			fsl,pins = <
-				MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */
-			>;
-		};
-
-		pinctrl_usbotg_vbus: usbotg-vbusgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */
-				MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */
-			>;
-		};
-	};
-};
-
-&ipu {
-	status = "okay";
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-};
-
-&sdma {
-	fsl,sdma-ram-script-name = "sdma-imx53.bin";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	phy_type = "utmi";
-	disable-over-current;
-	vbus-supply = <&reg_usbh1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi";
-	dr_mode = "peripheral";
-	disable-over-current;
-	vbus-supply = <&reg_usbotg_vbus>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
deleted file mode 100644
index ae53d178a683..000000000000
--- a/arch/arm/boot/dts/imx53-voipac-bsb.dts
+++ /dev/null
@@ -1,153 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
- */
-
-/dts-v1/;
-#include "imx53-voipac-dmm-668.dtsi"
-
-/ {
-	sound {
-		compatible = "fsl,imx53-voipac-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-voipac-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <5>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio>;
-
-		led1 {
-			label = "led-red";
-			gpios = <&gpio3 29 0>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "led-orange";
-			gpios = <&gpio2 31 0>;
-			default-state = "off";
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-voipac {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* SD2_CD */
-				MX53_PAD_EIM_D25__GPIO3_25	0x80000000
-				/* SD2_WP */
-				MX53_PAD_EIM_A19__GPIO2_19 	0x80000000
-			>;
-		};
-
-		led_pin_gpio: led_gpio {
-			fsl,pins = <
-				MX53_PAD_EIM_D29__GPIO3_29	0x80000000
-				MX53_PAD_EIM_EB3__GPIO2_31	0x80000000
-			>;
-		};
-
-		/* Keyboard controller */
-		pinctrl_kpp_1: kppgrp-1 {
-			fsl,pins = <
-				MX53_PAD_GPIO_9__KPP_COL_6	0xe8
-				MX53_PAD_GPIO_4__KPP_COL_7	0xe8
-				MX53_PAD_KEY_COL2__KPP_COL_2	0xe8
-				MX53_PAD_KEY_COL3__KPP_COL_3	0xe8
-				MX53_PAD_KEY_COL4__KPP_COL_4	0xe8
-				MX53_PAD_GPIO_2__KPP_ROW_6	0xe0
-				MX53_PAD_GPIO_5__KPP_ROW_7	0xe0
-				MX53_PAD_KEY_ROW2__KPP_ROW_2	0xe0
-				MX53_PAD_KEY_ROW3__KPP_ROW_3	0xe0
-				MX53_PAD_KEY_ROW4__KPP_ROW_4	0xe0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_3__I2C3_SCL		0xc0000000
-				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
-			>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>; /* SSI1 */
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&clks 150>;
-	};
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp_1>;
-	linux,keymap = <
-			0x0203003b	/* KEY_F1 */
-			0x0603003c	/* KEY_F2 */
-			0x0207003d	/* KEY_F3 */
-			0x0607003e	/* KEY_F4 */
-			>;
-	keypad,num-rows = <8>;
-	keypad,num-columns = <1>;
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
deleted file mode 100644
index 24859d0c09c1..000000000000
--- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
+++ /dev/null
@@ -1,267 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
- */
-
-#include "imx53.dtsi"
-
-/ {
-	model = "Voipac i.MX53 X53-DMM-668";
-	compatible = "voipac,imx53-dmm-668", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x20000000>,
-		      <0xb0000000 0x20000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 31 0>; /* PEN */
-			enable-active-high;
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-voipac {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* Make DA9053 regulator functional */
-				MX53_PAD_GPIO_16__GPIO7_11	0x80000000
-				/* FEC Power enable */
-				MX53_PAD_GPIO_11__GPIO4_1	0x80000000
-				/* FEC RST */
-				MX53_PAD_GPIO_12__GPIO4_2	0x80000000
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
-				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
-				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
-				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
-				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
-				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
-				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
-				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
-				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
-				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
-				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
-				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
-				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
-				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
-				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
-				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
-			>;
-		};
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
-		   <&gpio2 16 GPIO_ACTIVE_LOW>, <&gpio2 17 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: dialog@48 {
-		compatible = "dlg,da9053-aa", "dlg,da9052";
-		reg = <0x48>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */
-
-		regulators {
-			buck1_reg: buck1 {
-				regulator-name = "BUCKCORE";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-			};
-
-			buck2_reg: buck2 {
-				regulator-name = "BUCKPRO";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			buck3_reg: buck3 {
-				regulator-name = "BUCKMEM";
-				regulator-min-microvolt = <1420000>;
-				regulator-max-microvolt = <1580000>;
-				regulator-always-on;
-			};
-
-			buck4_reg: buck4 {
-				regulator-name = "BUCKPERI";
-				regulator-min-microvolt = <2370000>;
-				regulator-max-microvolt = <2630000>;
-				regulator-always-on;
-			};
-
-			ldo1_reg: ldo1 {
-				regulator-name = "ldo1_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ldo2 {
-				regulator-name = "ldo2_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: ldo3 {
-				regulator-name = "ldo3_3v3";
-				regulator-min-microvolt = <3250000>;
-				regulator-max-microvolt = <3350000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: ldo4 {
-				regulator-name = "ldo4_2v775";
-				regulator-min-microvolt = <2770000>;
-				regulator-max-microvolt = <2780000>;
-				regulator-always-on;
-			};
-
-			ldo5_reg: ldo5 {
-				regulator-name = "ldo5_3v3";
-				regulator-min-microvolt = <3250000>;
-				regulator-max-microvolt = <3350000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: ldo6 {
-				regulator-name = "ldo6_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: ldo7 {
-				regulator-name = "ldo7_2v75";
-				regulator-min-microvolt = <2700000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: ldo8 {
-				regulator-name = "ldo8_1v8";
-				regulator-min-microvolt = <1750000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: ldo9 {
-				regulator-name = "ldo9_1v5";
-				regulator-min-microvolt = <1450000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: ldo10 {
-				regulator-name = "ldo10_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
deleted file mode 100644
index dfa6f64d43cc..000000000000
--- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * support for the imx6 based aristainetos2 board
- *
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-aristainetos2.dtsi"
-
-/ {
-	model = "aristainetos2 i.MX6 Dual Lite Board 4";
-	compatible = "abb,aristainetos2-imx6dl-4", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	display0: disp0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp>;
-
-		port@0 {
-			reg = <0>;
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			display_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&ecspi1 {
-	lcd_panel: display@0 {
-		compatible = "lg,lg4573";
-		spi-max-frequency = <10000000>;
-		reg = <0>;
-		power-on-delay = <10>;
-
-		display-timings {
-			480x800p57 {
-				native-mode;
-				clock-frequency = <27000027>;
-				hactive = <480>;
-				vactive = <800>;
-				hfront-porch = <10>;
-				hback-porch = <59>;
-				hsync-len = <10>;
-				vback-porch = <15>;
-				vfront-porch = <15>;
-				vsync-len = <15>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	touch: touch@4b {
-		compatible = "atmel,maxtouch";
-		reg = <0x4b>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <9 8>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&iomuxc {
-	pinctrl_ipu_disp: ipudisp1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0xE1
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0xE1
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0xE1
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0xE1
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0xE1
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0xE1
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0xE1
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0xE1
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0xE1
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0xE1
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0xE1
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0xE1
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0xE1
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0xE1
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0xE1
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0xe1
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0xE1
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0xE1
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0xE1
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0xE1
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0xE1
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0xE1
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0xE1
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0xE1
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0xE1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
deleted file mode 100644
index 5e15212eaf3a..000000000000
--- a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * support for the imx6 based aristainetos2 board
- *
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-aristainetos2.dtsi"
-
-/ {
-	model = "aristainetos2 i.MX6 Dual Lite Board 7";
-	compatible = "abb,aristainetos2-imx6dl-7", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	panel: panel {
-		compatible = "lg,lb070wv8";
-		backlight = <&backlight>;
-		enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	touch: touch@4d {
-		compatible = "atmel,maxtouch";
-		reg = <0x4d>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <9 8>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-			lvds0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_lvds0>;
-			};
-		};
-
-		port@4 {
-			reg = <4>;
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw551x.dts b/arch/arm/boot/dts/imx6dl-gw551x.dts
deleted file mode 100644
index 82d5f85722ea..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw551x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw551x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW551X";
-	compatible = "gw,imx6dl-gw551x", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw553x.dts b/arch/arm/boot/dts/imx6dl-gw553x.dts
deleted file mode 100644
index 59b8afc36e66..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw553x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw553x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW553X";
-	compatible = "gw,imx6dl-gw553x", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw560x.dts b/arch/arm/boot/dts/imx6dl-gw560x.dts
deleted file mode 100644
index 21bdfaf8df53..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw560x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw560x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW560X";
-	compatible = "gw,imx6dl-gw560x", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw5903.dts b/arch/arm/boot/dts/imx6dl-gw5903.dts
deleted file mode 100644
index 103261ea9334..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw5903.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw5903.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Duallite/Solo GW5903";
-	compatible = "gw,imx6dl-gw5903", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw5904.dts b/arch/arm/boot/dts/imx6dl-gw5904.dts
deleted file mode 100644
index 9c6d3cd3d6a7..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw5904.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw5904.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5904";
-	compatible = "gw,imx6dl-gw5904", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/imx6dl-qmx6.dtsi
deleted file mode 100644
index 150d69858255..000000000000
--- a/arch/arm/boot/dts/imx6dl-qmx6.dtsi
+++ /dev/null
@@ -1,612 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
-//
-// Device Tree Source for i.MX6DL based congatec QMX6
-// System on Module
-//
-// Copyright 2018-2021 General Electric Company
-// Copyright 2018-2021 Collabora
-// Copyright 2016 congatec AG
-
-#include "imx6dl.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	memory@10000000 {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	reg_3p3v: 3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
-		i2c-parent = <&i2c2>;
-
-		i2c5: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c6: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-
-	audmux_ssi1 {
-		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_TFSDIR |
-			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT6) |
-			IMX_AUDMUX_V2_PTCR_TCLKDIR |
-			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT6) |
-			IMX_AUDMUX_V2_PTCR_SYN)
-			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT6)
-		>;
-	};
-
-	audmux_aud6 {
-		fsl,audmux-port = <MX51_AUDMUX_PORT6>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
-		>;
-	};
-};
-
-&clks {
-	clocks = <&rtc_sqw>;
-	clock-names = "ckil";
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1>;
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "sst,sst25vf032b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0x0000000 0x100000>;
-		};
-
-		partition@100000 {
-			label = "user";
-			reg = <0x0100000 0x2fc000>;
-		};
-
-		partition@3fc000 {
-			label = "reserved";
-			reg = <0x03fc000 0x4000>;
-			read-only;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet &pinctrl_phy_reset>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	fsl,magic-packet;
-	phy-handle = <&phy0>;
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@6 {
-			reg = <6>;
-			qca,clk-out-frequency = <125000000>;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	rtc: m41t62@68 {
-		compatible = "st,m41t62";
-		reg = <0x68>;
-
-		rtc_sqw: clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-};
-
-&i2c6 {
-	pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <675000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/*
-			 * keep VGEN3, VGEN4 and VGEN5 enabled in order to
-			 * maintain backward compatibility with hw-rev. A.0
-			 */
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			/* supply voltage for eMMC */
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&pcie {
-	reset-gpio = <&gpio1 20 0>;
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-};
-
-&reg_arm {
-	vin-supply = <&sw1a_reg>;
-};
-
-&reg_pu {
-	vin-supply = <&sw1c_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&sw1c_reg>;
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usbh1 {
-	/* Connected to USB-Hub SMSC USB2514, provides P0, P2, P3, P4 on Qseven connector */
-	vbus-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-};
-
-&usdhc2 {
-	/* MicroSD card slot */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc3 {
-	/* eMMC module */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
-	bus-width = <8>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	qmx6mux: imx6qdl-qmx6 {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x110b0 /* Q7[67] HDA_SDO */
-				MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x30b0 /* Q7[59] HDA_SYNC */
-				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x30b0 /* Q7[65] HDA_SDI */
-				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x30b0 /* Q7[63] HDA_BITCLK */
-			>;
-		};
-
-		/* PHY is on System on Module, Q7[3-15] have Ethernet lines */
-		pinctrl_enet: enet {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000 /* PCIE_WAKE_B */
-				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x80000000 /* I2C multiplexer */
-				MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x80000000 /* SD4_CD# */
-				MX6QDL_PAD_NANDF_D7__GPIO2_IO07		0x80000000 /* SD4_WP */
-				MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x80000000 /* Camera MCLK */
-			>;
-		};
-
-		pinctrl_i2c1: i2c1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1 /* Q7[66] I2C_CLK */
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1 /* Q7[68] I2C_DAT */
-			>;
-		};
-
-		pinctrl_i2c1_gpio: i2c1-gpio {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x1b0b0 /* Q7[66] I2C_CLK */
-				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b0 /* Q7[68] I2C_DAT */
-			>;
-		};
-
-		pinctrl_i2c2: i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1 /* Q7[152] SDVO_CTRL_CLK */
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1 /* Q7[150] SDVO_CTRL_DAT */
-			>;
-		};
-
-		pinctrl_i2c2_gpio: i2c2-gpio {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x1b0b0 /* Q7[152] SDVO_CTRL_CLK */
-				MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x1b0b0 /* Q7[150] SDVO_CTRL_DAT */
-			>;
-		};
-
-		pinctrl_i2c3: i2c3 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1 /* Q7[60] SMB_CLK */
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1 /* Q7[62] SMB_DAT */
-			>;
-		};
-
-		pinctrl_i2c3_gpio: i2c3-gpio {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x1b0b0 /* Q7[60] SMB_CLK */
-				MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0 /* Q7[62] SMB_DAT */
-			>;
-		};
-
-		pinctrl_phy_reset: phy-reset {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0 /* RGMII Phy Reset */
-			>;
-		};
-
-		pinctrl_pwm4: pwm4 {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1 /* Q7[123] LVDS_BLT_CTRL */
-			>;
-		};
-
-		pinctrl_q7_backlight_enable: q7-backlight-enable {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0 /* Q7[112] LVDS_BLEN */
-			>;
-		};
-
-		pinctrl_q7_gpio0: q7-gpio0 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0 /* Q7[185] GPIO0 */
-			>;
-		};
-
-		pinctrl_q7_gpio1: q7-gpio1 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0 /* Q7[186] GPIO1 */
-			>;
-		};
-
-		pinctrl_q7_gpio2: q7-gpio2 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b0 /* Q7[187] GPIO2 */
-			>;
-		};
-
-		pinctrl_q7_gpio3: q7-gpio3 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x1b0b0 /* Q7[188] GPIO3 */
-			>;
-		};
-
-		pinctrl_q7_gpio4: q7-gpio4 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /* Q7[189] GPIO4 */
-			>;
-		};
-
-		pinctrl_q7_gpio5: q7-gpio5 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0 /* Q7[190] GPIO5 */
-			>;
-		};
-
-		pinctrl_q7_gpio6: q7-gpio6 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b0 /* Q7[191] GPIO6 */
-			>;
-		};
-
-		pinctrl_q7_gpio7: q7-gpio7 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* Q7[192] GPIO7 */
-			>;
-		};
-
-		pinctrl_q7_hda_reset: q7-hda-reset {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0 /* Q7[61] HDA_RST_N */
-			>;
-		};
-
-		pinctrl_q7_lcd_power: lcd-power {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0 /* Q7[111] LVDS_PPEN */
-			>;
-		};
-
-		pinctrl_q7_sdio_power: q7-sdio-power {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b0 /* Q7[47] SDIO_PWR# */
-			>;
-		};
-
-		pinctrl_q7_sleep_button: q7-sleep-button {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0 /* Q7[21] SLP_BTN# */
-			>;
-		};
-
-		pinctrl_q7_spi_cs1: spi-cs1 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b0 /* Q7[202] SPI_CS1# */
-			>;
-		};
-
-		/* SPI1 bus does not leave System on Module */
-		pinctrl_spi1: spi1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
-			>;
-		};
-
-		/* Debug connector on Q7 module */
-		pinctrl_uart2: uart2 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1 /* Q7[177] UART0_RX */
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1 /* Q7[171] UART0_TX */
-			>;
-		};
-
-		pinctrl_usbotg: usbotg {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059 /* Q7[92] USB_ID */
-			>;
-		};
-
-		/* µSD card slot on Q7 module */
-		pinctrl_usdhc2: usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0 /* SD2_CD */
-			>;
-		};
-
-		/* eMMC module on Q7 module */
-		pinctrl_usdhc3: usdhc3 {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4 {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059 /* Q7[45] SDIO_CMD */
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x17059 /* Q7[42] SDIO_CLK */
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059 /* Q7[48] SDIO_DAT1 */
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059 /* Q7[49] SDIO_DAT0 */
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059 /* Q7[50] SDIO_DAT3 */
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059 /* Q7[51] SDIO_DAT2 */
-			>;
-		};
-
-		pinctrl_wdog: wdog {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0 /* Watchdog output signal */
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
deleted file mode 100644
index e7d9bfbfd0e4..000000000000
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ /dev/null
@@ -1,596 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2014 Iain Paton <ipaton0@gmail.com>
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "RIoTboard i.MX6S";
-	compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	chosen {
-		stdout-path = "serial1:115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6-riotboard-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-			mux-int-port = <1>;
-			mux-ext-port = <3>;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_usb_otg_vbus: regulator-usbotgvbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&clks {
-	fsl,pmic-stby-poweroff;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&rgmii_phy>;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Atheros AR8035 PHY */
-		rgmii_phy: ethernet-phy@4 {
-			reg = <4>;
-			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <1000>;
-			qca,smarteee-tw-us-1g = <24>;
-			qca,clk-out-frequency = <125000000>;
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "", "SD2_WP", "", "SD2_CD", "I2C3_SCL",
-			"I2C3_SDA", "I2C4_SCL",
-		"I2C4_SDA", "", "", "", "", "", "", "",
-		"", "PWM3", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "USB_OTG_VBUS", "",
-		"UART3_TXD", "UART3_RXD", "", "", "EIM_D28", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
-		"UART5_TXD", "UART5_RXD", "", "", "", "", "", "",
-		"GPIO4_16", "GPIO4_17", "GPIO4_18", "GPIO4_19", "",
-			"CSPI3_CLK", "CSPI3_MOSI", "CSPI3_MISO",
-		"CSPI3_CS0", "CSPI3_CS1", "GPIO4_26", "GPIO4_27",
-			"CSPI3_RDY", "PWM1", "PWM2", "GPIO4_31";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "EIM_A25", "", "", "GPIO5_05", "GPIO5_06",
-			"GPIO5_07",
-		"GPIO5_08", "CSPI2_CS1", "CSPI2_MOSI", "CSPI2_MISO",
-			"CSPI2_CS0", "CSPI2_CLK", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio7 {
-	gpio-line-names =
-		"SD3_CD", "SD3_WP", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	pmic: pf0100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <16 8>;
-		fsl,pmic-stby-poweroff;
-
-		regulators {
-			reg_vddcore: sw1ab {				/* VDDARM_IN */
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-			};
-
-			reg_vddsoc: sw1c {				/* VDDSOC_IN */
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-			};
-
-			reg_gen_3v3: sw2 {				/* VDDHIGH_IN */
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_ddr_1v5a: sw3a {				/* NVCC_DRAM, NVCC_RGMII */
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			reg_ddr_1v5b: sw3b {				/* NVCC_DRAM, NVCC_RGMII */
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			reg_ddr_vtt: sw4 {				/* MIPI conn */
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			reg_5v_600mA: swbst {				/* not used */
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			reg_snvs_3v: vsnvs {				/* VDD_SNVS_IN */
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {				/* VREF_DDR */
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_vgen1_1v5: vgen1 {				/* not used */
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			reg_vgen2_1v2_eth: vgen2 {			/* pcie ? */
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			reg_vgen3_2v8: vgen3 {				/* not used */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-			reg_vgen4_1v8: vgen4 {				/* NVCC_SD3 */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_vgen5_2v5_sgtl: vgen5 {			/* Pwr LED & 5V0_delayed enable */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_vgen6_3v3: vgen6 {				/* #V#_DELAYED enable, MIPI */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	clocks = <&clks 116>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-
-	imx6-riotboard {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* CAM_MCLK */
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x000b1		/* CS0 */
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x000b1		/* CS1 */
-				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1		/* CS0 */
-				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1		/* CS0 */
-				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x000b1		/* CS1 */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1		/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030		/* AR8035 pin strapping: IO voltage: pull up */
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030		/* AR8035 pin strapping: PHYADDR#0: pull down */
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030		/* AR8035 pin strapping: PHYADDR#1: pull down */
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030		/* AR8035 pin strapping: MODE#1: pull up */
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030		/* AR8035 pin strapping: MODE#3: pull up */
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8	/* GPIO16 -> AR8035 25MHz */
-				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0		/* AR8035 interrupt */
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c4: i2c4grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_7__I2C4_SCL             0x4001b8b1
-				MX6QDL_PAD_GPIO_8__I2C4_SDA             0x4001b8b1
-			>;
-		};
-
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* user led0 */
-				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* user led1 */
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
-				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* SD2 CD */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* SD2 WP */
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0	/* SD3 CD */
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1f0b0	/* SD3 WP */
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x17059	/* SD4 RST (eMMC) */
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
deleted file mode 100644
index 51a9bb9d6bc2..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-};
-
-&backlight {
-	pwms = <&pwm2 0 500000 0>;
-	/delete-property/ turn-on-delay-ms;
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&lcd_panel {
-	compatible = "edt,etm0700g0edh6";
-};
-
-&reg_can_xcvr {
-	status = "disabled";
-};
-
-&touchscreen {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts
deleted file mode 100644
index fc23b4d291a1..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6s-8034.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6S-8034 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
deleted file mode 100644
index 9eb2ef17339c..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6S-8034 Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	cpus {
-		/delete-node/ cpu@1;
-	};
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&pinctrl_usdhc1 {
-	fsl,pins = <
-		MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1
-		MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1
-		MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1
-		MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1
-		MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1
-		MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1
-		MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */
-	>;
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts
deleted file mode 100644
index 4101c6597721..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6s-8035.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8035 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
deleted file mode 100644
index a5532ecc18c5..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6S-8035 Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	cpus {
-		/delete-node/ cpu@1;
-	};
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
deleted file mode 100644
index 67ed0452f5de..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-801x Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts
deleted file mode 100644
index d34189fc52d9..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6u-8033.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8033 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
deleted file mode 100644
index 7030b2654bbd..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8033 Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts
deleted file mode 100644
index aef5fcc42904..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6u-801x.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8030/-8010/-8012 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
deleted file mode 100644
index 5342f2f5a8a8..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lvds.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-811x Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
deleted file mode 100644
index c4588fb0bf6f..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6u-811x.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8130/-8110 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts
deleted file mode 100644
index fa160a389870..000000000000
--- a/arch/arm/boot/dts/imx6q-apalis-eval.dts
+++ /dev/null
@@ -1,170 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2014-2022 Toradex
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q.dtsi"
-#include "imx6qdl-apalis.dtsi"
-
-/ {
-	model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board";
-	compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q",
-		     "fsl,imx6q";
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c3;
-		i2c2 = &i2c2;
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reg_pcie_switch: regulator-pcie-switch {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		regulator-max-microvolt = <1800000>;
-		regulator-min-microvolt = <1800000>;
-		regulator-name = "pcie_switch";
-		startup-delay-us = <100000>;
-		status = "okay";
-	};
-
-	reg_3v3_sw: regulator-3v3-sw {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "3.3V_SW";
-	};
-};
-
-&can1 {
-	xceiver-supply = <&reg_3v3_sw>;
-	status = "okay";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3_sw>;
-	status = "okay";
-};
-
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	status = "okay";
-
-	pcie-switch@58 {
-		compatible = "plx,pex8605";
-		reg = <0x58>;
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-/*
- * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
- * board)
- */
-&i2c3 {
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_moci>;
-	/* active-high meaning opposite of regular PERST# active-low polarity */
-	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
-	vpcie-supply = <&reg_pcie_switch>;
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&reg_usb_otg_vbus {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sound_spdif {
-	status = "okay";
-};
-
-&spdif {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	status = "okay";
-};
-
-/* MMC1 */
-&usdhc1 {
-	status = "okay";
-};
-
-/* SD1 */
-&usdhc2 {
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
deleted file mode 100644
index 0b40f52268b3..000000000000
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ /dev/null
@@ -1,225 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad Armadillo2 Board";
-	compatible = "fsl,imx6q-arm2", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		debug-led {
-			label = "Heartbeat";
-			gpios = <&gpio3 25 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "disabled"; /* gpmi nand conflicts with SD */
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-arm2 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x1b0b1
-				MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_cdwp: usdhc3cdwp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
-				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3
-		     &pinctrl_usdhc3_cdwp>;
-	status = "okay";
-};
-
-&usdhc4 {
-	non-removable;
-	vmmc-supply = <&reg_3p3v>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,dte-mode;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts b/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts
deleted file mode 100644
index 16658b76fc4e..000000000000
--- a/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright 2017
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q-display5.dtsi"
-
-&panel {
-	compatible = "tianma,tm070jdhg30";
-};
-
-&ldb {
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
deleted file mode 100644
index 9591848cbd37..000000000000
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ /dev/null
@@ -1,481 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Data Modul AG
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Data Modul eDM-QMX6 Board";
-	compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	aliases {
-		gpio7 = &stmpe_gpio1;
-		gpio8 = &stmpe_gpio2;
-		stmpe-i2c0 = &stmpe1;
-		stmpe-i2c1 = &stmpe2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_switch: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_otg_switch";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio7 12 0>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		reg_usb_host1: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_host1_en";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 31 0>;
-			enable-active-high;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		led-blue {
-			label = "blue";
-			gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-green {
-			label = "green";
-			gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pink {
-			label = "pink";
-			gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-red {
-			label = "red";
-			gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&ecspi5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi5>;
-	cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "m25p80", "jedec,spi-nor";
-		spi-max-frequency = <40000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	phy-supply = <&vgen2_1v2_eth>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2
-		     &pinctrl_stmpe1
-		     &pinctrl_stmpe2
-		     &pinctrl_pfuze>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <20 8>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_1v2_eth: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vdd_high_in: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	stmpe1: stmpe1601@40 {
-		compatible = "st,stmpe1601";
-		reg = <0x40>;
-		interrupts = <30 0>;
-		interrupt-parent = <&gpio3>;
-		vcc-supply = <&sw2_reg>;
-		vio-supply = <&sw2_reg>;
-
-		stmpe_gpio1: stmpe_gpio {
-			#gpio-cells = <2>;
-			compatible = "st,stmpe-gpio";
-		};
-	};
-
-	stmpe2: stmpe1601@44 {
-		compatible = "st,stmpe1601";
-		reg = <0x44>;
-		interrupts = <2 0>;
-		interrupt-parent = <&gpio5>;
-		vcc-supply = <&sw2_reg>;
-		vio-supply = <&sw2_reg>;
-
-		stmpe_gpio2: stmpe_gpio {
-			#gpio-cells = <2>;
-			compatible = "st,stmpe-gpio";
-		};
-	};
-
-	temp1: ad7414@4c {
-		compatible = "ad,ad7414";
-		reg = <0x4c>;
-	};
-
-	temp2: ad7414@4d {
-		compatible = "ad,ad7414";
-		reg = <0x4d>;
-	};
-
-	rtc: m41t62@68 {
-		compatible = "st,m41t62";
-		reg = <0x68>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-dmo-edmqmx6 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
-				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-				MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi5: ecspi5rp-1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x80000000
-				MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x80000000
-				MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x80000000
-				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x80000000
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x100b1
-			>;
-		};
-
-		pinctrl_pfuze: pfuze100grp1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x80000000
-			>;
-		};
-
-		pinctrl_stmpe1: stmpe1grp {
-			fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
-		};
-
-		pinctrl_stmpe2: stmpe2grp {
-			fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host1>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	bus-width = <8>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
deleted file mode 100644
index 2fda68f9d3f6..000000000000
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2013 Philipp Zabel
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Zealz GK802";
-	compatible = "zealz,imx6q-gk802", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		recovery-button {
-			label = "recovery";
-			gpios = <&gpio3 16 1>;
-			linux,code = <KEY_RESTART>;
-			wakeup-source;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-/* Internal I2C */
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	/* SDMC DM2016 1024 bit EEPROM + 128 bit OTP */
-	eeprom: dm2016@51 {
-		compatible = "sdmc,dm2016";
-		reg = <0x51>;
-	};
-};
-
-/* External I2C via HDMI */
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-gk802 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* Recovery button, active-low */
-				MX6QDL_PAD_EIM_D16__GPIO3_IO16  0x100b1
-				/* RTL8192CU enable GPIO, active-low */
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-			>;
-		};
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-/* External USB-A port (USBOTG) */
-&usbotg {
-	disable-over-current;
-	status = "okay";
-};
-
-/* Internal USB port (USBH1), connected to RTL8192CU */
-&usbh1 {
-	disable-over-current;
-	status = "okay";
-};
-
-/* External microSD */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-/* Internal microSD */
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw551x.dts b/arch/arm/boot/dts/imx6q-gw551x.dts
deleted file mode 100644
index 2c7feeef1b0e..000000000000
--- a/arch/arm/boot/dts/imx6q-gw551x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw551x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW551X";
-	compatible = "gw,imx6q-gw551x", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw553x.dts b/arch/arm/boot/dts/imx6q-gw553x.dts
deleted file mode 100644
index e9c224cea752..000000000000
--- a/arch/arm/boot/dts/imx6q-gw553x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw553x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW553X";
-	compatible = "gw,imx6q-gw553x", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw560x.dts b/arch/arm/boot/dts/imx6q-gw560x.dts
deleted file mode 100644
index 735f2bbf1439..000000000000
--- a/arch/arm/boot/dts/imx6q-gw560x.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw560x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW560X";
-	compatible = "gw,imx6q-gw560x", "gw,ventana", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw5903.dts b/arch/arm/boot/dts/imx6q-gw5903.dts
deleted file mode 100644
index a182e4cb0e6e..000000000000
--- a/arch/arm/boot/dts/imx6q-gw5903.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw5903.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW5903";
-	compatible = "gw,imx6q-gw5903", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw5904.dts b/arch/arm/boot/dts/imx6q-gw5904.dts
deleted file mode 100644
index ca1e2ae3341e..000000000000
--- a/arch/arm/boot/dts/imx6q-gw5904.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw5904.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW5904";
-	compatible = "gw,imx6q-gw5904", "gw,ventana", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts
deleted file mode 100644
index b8feadbff967..000000000000
--- a/arch/arm/boot/dts/imx6q-h100.dts
+++ /dev/null
@@ -1,382 +0,0 @@
-/*
- * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-brcm.dtsi"
-
-/ {
-	model = "Auvidea H100";
-	compatible = "auvidea,h100", "fsl,imx6q";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	aliases {
-		rtc0 = &rtc;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	hdmi_osc: hdmi-osc {
-		compatible = "fixed-clock";
-		clock-output-names = "hdmi-osc";
-		clock-frequency = <27000000>;
-		#clock-cells = <0>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_leds>;
-
-		led0: power {
-			label = "power";
-			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		led1: stream {
-			label = "stream";
-			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led2: rec {
-			label = "rec";
-			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_hdmi: regulator-hdmi {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-		regulator-name = "V_HDMI";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usbh1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
-		regulator-name = "USB_H1_VBUS";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbotg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
-		regulator-name = "USB_OTG_VBUS";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	sound-sgtl5000 {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "H100 on-board codec";
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-ext-port = <5>;
-		mux-int-port = <1>;
-		ssi-controller = <&ssi1>;
-	};
-};
-
-&audmux {
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_i2c1>;
-	status = "okay";
-
-	eeprom: 24c02@51 {
-		compatible = "microchip,24c02", "atmel,24c02";
-		reg = <0x51>;
-	};
-
-	rtc: pcf8523@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-
-	sgtl5000: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_sgtl5000>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	tc358743: tc358743@f {
-		compatible = "toshiba,tc358743";
-		reg = <0x0f>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_tc358743>;
-		clocks = <&hdmi_osc>;
-		clock-names = "refclk";
-		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
-		/* IRQ has a wrong pull resistor which renders it useless  */
-
-		port {
-			tc358743_out: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				data-lanes = <1 2 3 4>;
-				clock-lanes = <0>;
-				clock-noncontinuous;
-				link-frequencies = /bits/ 64 <297000000>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	h100 {
-		pinctrl_h100_hdmi: h100-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
-			>;
-		};
-
-		pinctrl_h100_i2c1: h100-i2c1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_h100_i2c2: h100-i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_h100_leds: pinctrl-h100-leds {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b0
-				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
-				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_reg_hdmi: h100-reg-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_sgtl5000: h100-sgtl5000 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
-				MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
-				MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0
-				MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
-				MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
-			>;
-		};
-
-		pinctrl_h100_tc358743: h100-tc358743 {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_uart2: h100-uart2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_usbotg_id: hummingboard-usbotg-id {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
-			>;
-		};
-
-		pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_usdhc2: h100-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x13059
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
-			>;
-		};
-	};
-};
-
-&mipi_csi {
-	status = "okay";
-
-	port {
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&tc358743_out>;
-			data-lanes = <1 2 3 4>;
-			clock-lanes = <0>;
-			clock-noncontinuous;
-			link-frequencies = /bits/ 64 <297000000>;
-		};
-	};
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	vbus-supply = <&reg_usbh1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_usbotg_id>;
-	vbus-supply = <&reg_usbotg_vbus>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_h100_usdhc2>;
-	pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
deleted file mode 100644
index 4d6a0c3e8455..000000000000
--- a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
- */
-
-#include "imx6q.dtsi"
-#include "imx6qdl-kontron-samx6i.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Kontron SMARC sAMX6i Quad/Dual";
-	compatible = "kontron,imx6q-samx6i", "fsl,imx6q";
-};
-
-/* Quad/Dual SoMs have 3 chip-select signals */
-&ecspi4 {
-	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
-		   <&gpio3 29 GPIO_ACTIVE_LOW>,
-		   <&gpio3 25 GPIO_ACTIVE_LOW>;
-};
-
-&pinctrl_ecspi4 {
-	fsl,pins = <
-		MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-		MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
-		MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
-
-		/* SPI4_IMX_CS2# - connected to internal flash */
-		MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
-		/* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */
-		MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
-		/* SPI4_CS3# - connected to  SMARC SPI0_CS1# */
-		MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
-	>;
-};
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
deleted file mode 100644
index dc51262e7b2f..000000000000
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-sabrelite.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad SABRE Lite Board";
-	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
-
-&ipu1_csi1_from_mipi_vc1 {
-	clock-lanes = <0>;
-	data-lanes = <1 2>;
-};
diff --git a/arch/arm/boot/dts/imx6q-sbc6x.dts b/arch/arm/boot/dts/imx6q-sbc6x.dts
deleted file mode 100644
index 9054c1d58b9d..000000000000
--- a/arch/arm/boot/dts/imx6q-sbc6x.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2013 Pavel Machek <pavel@denx.de>
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-
-/ {
-	model = "MicroSys sbc6x board";
-	compatible = "microsys,sbc6x", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-};
-
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
-&iomuxc {
-	imx6q-sbc6x {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
deleted file mode 100644
index ac3050a835e5..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&backlight {
-	pwms = <&pwm2 0 500000 0>;
-	/delete-property/ turn-on-delay-ms;
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&lcd_panel {
-	compatible = "edt,etm0700g0edh6";
-};
-
-&reg_can_xcvr {
-	status = "disabled";
-};
-
-&touchscreen {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
deleted file mode 100644
index 4ee860b626ff..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1010/-1030 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&ipu2 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
deleted file mode 100644
index a773f252816c..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&backlight {
-	pwms = <&pwm2 0 500000 0>;
-	/delete-property/ turn-on-delay-ms;
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&lcd_panel {
-	compatible = "edt,etm0700g0edh6";
-};
-
-&reg_can_xcvr {
-	status = "disabled";
-};
-
-&touchscreen {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
deleted file mode 100644
index 0a4daec8d3ad..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1020 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts
deleted file mode 100644
index 9ffbb0fe7df8..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q-tx6q-1036.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1036 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/imx6q-tx6q-1036.dts
deleted file mode 100644
index cb2fcb4896c6..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1036.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1036 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts
deleted file mode 100644
index d43a5d8f1749..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q-tx6q-1010.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1010/-1030 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
deleted file mode 100644
index f7b0acb65352..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lvds.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1110/-1130 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
deleted file mode 100644
index 387edf2b3f96..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q-tx6q-1110.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
deleted file mode 100644
index baa197c90060..000000000000
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ /dev/null
@@ -1,408 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * support fot the imx6 based aristainetos board
- *
- * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usbh1_vbus: regulator-usbh1-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>;
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbotg_vbus: regulator-usbotg-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>;
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	tmp103: tmp103@71 {
-		compatible = "ti,tmp103";
-		reg = <0x71>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	rtc@68 {
-		compatible = "dallas,m41t00";
-		reg = <0x68>;
-	};
-};
-
-&ecspi4 {
-	cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usbotg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog &pinctrl_gpio>;
-
-	imx6qdl-aristainetos {
-		pinctrl_aristainetos_usbh1_vbus: aristainetos-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0>;
-		};
-
-		pinctrl_aristainetos_usbotg_vbus: aristainetos-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
-			>;
-		};
-
-		pinctrl_backlight: backlightgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
-				MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b0
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
-				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
-				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
-				MX6QDL_PAD_EIM_D24__GPIO3_IO24  0x100b1
-			>;
-		};
-
-		pinctrl_ecspi4: ecspi4grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-				MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
-				MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
-				MX6QDL_PAD_EIM_D20__GPIO3_IO20  0x100b1
-				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO  0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC    0x1b0b0
-				MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
-				MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
-				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN   0x1b0b0
-				MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER   0x1b0b0
-				MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
-				MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
-				MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN  0x1b0b0
-			>;
-		};
-
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-			>;
-		};
-
-		pinctrl_flexcan2: flexcan2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
-				MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
-				>;
-		};
-
-		pinctrl_gpio: gpiogrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0
-				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x1b0b0
-				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
-				MX6QDL_PAD_SD4_DAT5__GPIO2_IO13	0x1b0b0
-				MX6QDL_PAD_GPIO_3__GPIO1_IO03	0x1b0b0
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x1b0b0
-				MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b0b0
-				MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0
-				MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x1b0b0
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x10
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_ipu_disp: ipudisp1grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
-				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20			0x20000
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
-				>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
-				MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
deleted file mode 100644
index 1e530d892b76..000000000000
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * Copyright (C) 2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	ir_recv: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio3 9 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_ir>;
-	};
-
-	led-controller {
-		compatible = "pwm-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
-
-		led-1 {
-			active-low;
-			label = "imx6:red:front";
-			max-brightness = <248>;
-			pwms = <&pwm1 0 50000>;
-		};
-	};
-
-	v_5v0: regulator-v-5v0 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_5v0";
-	};
-
-	v_usb2: regulator-v-usb2 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb2";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_usb1: regulator-v-usb1 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb1";
-		vin-supply = <&v_5v0>;
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "Integrated SPDIF";
-		/* IMX6 doesn't implement this yet */
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pinctrl_gpio_key>;
-		pinctrl-names = "default";
-
-		button_0 {
-			label = "Button 0";
-			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-	};
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_i2c3>;
-
-	status = "okay";
-
-	rtc@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	cubox_i {
-		pinctrl_cubox_i_hdmi: cubox-i-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-			>;
-		};
-
-		pinctrl_cubox_i_i2c2: cubox-i-i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_cubox_i_i2c3: cubox-i-i2c3 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_cubox_i_ir: cubox-i-ir {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
-			>;
-		};
-
-		pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
-			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
-		};
-
-		pinctrl_cubox_i_spdif: cubox-i-spdif {
-			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
-		};
-
-		pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
-			fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
-		};
-
-		pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
-		};
-
-		pinctrl_cubox_i_usbotg: cubox-i-usbotg {
-			/*
-			 * The Cubox-i pulls ID low, but as it's pointless
-			 * leaving it as a pull-up, even if it is just 10uA.
-			 */
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
-			>;
-		};
-
-		pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
-		};
-
-		pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-aux {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
-			>;
-		};
-
-		pinctrl_cubox_i_usdhc2: cubox-i-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
-			>;
-		};
-
-		pinctrl_gpio_key: gpio-key {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA8__GPIO3_IO08	0x17059
-			>;
-		};
-	};
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_spdif>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
-	vbus-supply = <&v_usb2>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
-	vbus-supply = <&v_usb1>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
-	vmmc-supply = <&vcc_3v3>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&vcc_3v3 {
-	vin-supply = <&v_5v0>;
-};
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
deleted file mode 100644
index 2c1d6f28e695..000000000000
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ /dev/null
@@ -1,201 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dummy_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "dummy-supply";
-		};
-
-		reg_usb_otg_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "sst,sst25vf040b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	status = "okay";
-	phy-mode = "rgmii";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-dfi-fs700-m60 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */
-				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */
-				MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* card detect */
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
-			>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc2 { /* module slot */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc3 { /* baseboard slot */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-};
-
-&usdhc4 { /* eMMC */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
deleted file mode 100644
index 2ffb21dd89f2..000000000000
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	ir_recv: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>;
-	};
-
-	v_3v2: regulator-v-3v2 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "v_3v2";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_5v0: regulator-v-5v0 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_5v0";
-	};
-
-	v_sd: regulator-v-sd {
-		compatible = "regulator-fixed";
-		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_vmmc>;
-		regulator-boot-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "v_sd";
-		startup-delay-us = <1000>;
-		vin-supply = <&v_3v2>;
-	};
-
-	v_usb2: regulator-v-usb2 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb2";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_usb1: regulator-v-usb1 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb1";
-		vin-supply = <&v_5v0>;
-	};
-
-	audio: sound-sgtl5000 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "On-board Codec";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound_codec>;
-		simple-audio-card,frame-master = <&sound_codec>;
-		simple-audio-card,widgets =
-			"Microphone", "Headphone Jack",
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Headphone Jack",
-			"Headphone Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-
-		sound_cpu: simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-		};
-
-		sound_codec: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-		};
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "On-board SPDIF";
-		/* IMX6 doesn't implement this yet */
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-};
-
-&audmux {
-	status = "okay";
-
-	ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_SYN |
-			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
-			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
-			 IMX_AUDMUX_V2_PTCR_TFSDIR |
-			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
-			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
-		>;
-	};
-
-	pins5 {
-		fsl,audmux-port = <4>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-		>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
-	status = "okay";
-
-	/* Pro baseboard model */
-	rtc@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-
-	/* Pro baseboard model */
-	sgtl5000: codec@a {
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>;
-		#sound-dai-cells = <0>;
-		reg = <0x0a>;
-		VDDA-supply = <&v_3v2>;
-		VDDIO-supply = <&v_3v2>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	hummingboard {
-		pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000
-				MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000
-			>;
-		};
-
-		pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1
-			>;
-		};
-
-		pinctrl_hummingboard_hdmi: hummingboard-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-			>;
-		};
-
-		pinctrl_hummingboard_i2c1: hummingboard-i2c1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard_i2c2: hummingboard-i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard_pcie_reset: hummingboard-pcie-reset {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1
-			>;
-		};
-
-		pinctrl_hummingboard_pwm1: pwm1grp {
-			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>;
-		};
-
-		pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
-				MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
-				MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
-				MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
-				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
-			>;
-		};
-
-		pinctrl_hummingboard_spdif: hummingboard-spdif {
-			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
-		};
-
-		pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id {
-			/*
-			 * We want it pulled down for a fixed host connection.
-			 */
-			fsl,pins = <MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059>;
-		};
-
-		pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
-			>;
-		};
-
-		pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
-			>;
-		};
-		pinctrl_hummingboard_vmmc: hummingboard-vmmc {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
-			>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>;
-	reset-gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	 pinctrl-names = "default";
-	 pinctrl-0 = <&pinctrl_hummingboard_pwm1>;
-	 status = "okay";
-};
-
-&pwm2 {
-	 pinctrl-names = "default";
-	 status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_spdif>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	vbus-supply = <&v_usb2>;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
-	vbus-supply = <&v_usb1>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&pinctrl_hummingboard_usdhc2_aux
-		&pinctrl_hummingboard_usdhc2
-	>;
-	vmmc-supply = <&v_sd>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&vcc_3v3 {
-	vin-supply = <&v_3v2>;
-};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
deleted file mode 100644
index eb1ad28946d3..000000000000
--- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
+++ /dev/null
@@ -1,577 +0,0 @@
-/*
- * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	ir_recv: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio7 9 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>;
-		linux,rc-map-name = "rc-rc6-mce";
-	};
-
-	v_3v2: regulator-v-3v2 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "v_3v2";
-	};
-
-	v_5v0: regulator-v-5v0 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_5v0";
-	};
-
-	vcc_1p8: regulator-vcc-1p8 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <1800000>;
-		regulator-min-microvolt = <1800000>;
-		regulator-name = "vcc_1p8";
-		vin-supply = <&v_3v2>;
-	};
-
-	v_sd: regulator-v-sd {
-		compatible = "regulator-fixed";
-		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_vmmc>;
-		regulator-boot-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "v_sd";
-		startup-delay-us = <1000>;
-		vin-supply = <&v_3v2>;
-	};
-
-	v_usb1: regulator-v-usb1 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>;
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb1";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_usb2: regulator-v-usb2 {
-		/* USB hub port 1 */
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>;
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb2";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_usb3: regulator-v-usb3 {
-		/* USB hub port 3 */
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>;
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb3";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_usb4: regulator-v-usb4 {
-		/* USB hub port 4 */
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>;
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb4";
-		vin-supply = <&v_5v0>;
-	};
-
-	audio: sound-sgtl5000 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "On-board Codec";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound_codec>;
-		simple-audio-card,frame-master = <&sound_codec>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-
-		sound_cpu: simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-		};
-
-		sound_codec: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-		};
-	};
-};
-
-&audmux {
-	status = "okay";
-
-	ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_SYN |
-			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
-			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
-			 IMX_AUDMUX_V2_PTCR_TFSDIR |
-			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
-			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
-		>;
-	};
-
-	pins5 {
-		fsl,audmux-port = <4>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-		>;
-	};
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>;
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_i2c1>;
-	status = "okay";
-
-	pcf8523: rtc@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-
-	sgtl5000: codec@a {
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		compatible = "fsl,sgtl5000";
-		#sound-dai-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>;
-		reg = <0x0a>;
-		VDDA-supply = <&v_3v2>;
-		VDDD-supply = <&vcc_1p8>;
-		VDDIO-supply = <&v_3v2>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hummingboard2 {
-		pinctrl_hog: hoggrp {
-		fsl,pins = <
-				/*
-				 * 36 pin headers GPIO description. The pins
-				 * numbering as following -
-				 *
-				 * 	3.2v	5v	74	75
-				 *	73	72	71	70
-				 *	69	68	67	66
-				 *
-				 *	77	78	79	76
-				 *	65	64	61	60
-				 *	53	52	51	50
-				 *	49	48	166	132
-				 *	95	94	90	91
-				 *	GND	54	24	204
-				 *
-				 * The GPIO numbers can be extracted using
-				 * signal name from below.
-				 * Example -
-				 * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is
-				 * GPIO(3,10) which is (3-1)*32+10 = gpio 74
-				 *
-				 * i.e. The mapping of GPIO(X,Y) to Linux gpio
-				 * number is : gpio number = (X-1) * 32 + Y
-				 */
-				/* DI1_PIN15 */
-				MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1
-				/* DI1_PIN02 */
-				MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1
-				/* DISP1_DATA00 */
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1
-				/* DISP1_DATA01 */
-				MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1
-				/* DISP1_DATA02 */
-				MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1
-				/* DISP1_DATA03 */
-				MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1
-				/* DISP1_DATA04 */
-				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1
-				/* DISP1_DATA05 */
-				MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1
-				/* DISP1_DATA06 */
-				MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1
-				/* DISP1_DATA07 */
-				MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1
-				/* DI1_D0_CS */
-				MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1
-				/* DI1_D1_CS */
-				MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1
-				/* DI1_PIN01 */
-				MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1
-				/* DI1_PIN03 */
-				MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1
-				/* DISP1_DATA08 */
-				MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1
-				/* DISP1_DATA09 */
-				MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1
-				/* DISP1_DATA10 */
-				MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1
-				/* DISP1_DATA11 */
-				MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1
-				/* DISP1_DATA12 */
-				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1
-				/* DISP1_DATA13 */
-				MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1
-				/* DISP1_DATA14 */
-				MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1
-				/* DISP1_DATA15 */
-				MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1
-				/* DISP1_DATA16 */
-				MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1
-				/* DISP1_DATA17 */
-				MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1
-				/* DISP1_DATA18 */
-				MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1
-				/* DISP1_DATA19 */
-				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1
-				/* DISP1_DATA20 */
-				MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1
-				/* DISP1_DATA21 */
-				MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1
-				/* DISP1_DATA22 */
-				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1
-				/* DISP1_DATA23 */
-				MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1
-				/* DI1_DISP_CLK */
-				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1
-				/* SPDIF_IN */
-				MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1
-				/* SPDIF_OUT */
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1
-
-				/* MikroBUS GPIO pin number 10 */
-				MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1
-			>;
-		};
-
-		pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
-				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
-				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
-				MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x000b1 /* CS */
-			>;
-		};
-
-		pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9 {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000
-			>;
-		};
-
-		pinctrl_hummingboard2_hdmi: hummingboard2-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-			>;
-		};
-
-		pinctrl_hummingboard2_i2c1: hummingboard2-i2c1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard2_i2c2: hummingboard2-i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard2_i2c3: hummingboard2-i2c3 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard2_mipi: hummingboard2_mipi {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1
-				MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1
-				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
-			>;
-		};
-
-		pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-reset {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1
-			>;
-		};
-
-		pinctrl_hummingboard2_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_hummingboard2_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
-				MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
-				MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
-				MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
-				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
-			>;
-		};
-
-		pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbus {
-			fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbus {
-			fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-id {
-			/*
-			 * We want it pulled down for a fixed host connection.
-			 */
-			fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
-		};
-
-		pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-aux {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
-			>;
-		};
-
-		pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
-			>;
-		};
-
-		pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170b9
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100b9
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9
-			>;
-		};
-
-		pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170f9
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100f9
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9
-			>;
-		};
-
-		pinctrl_hummingboard2_vmmc: hummingboard2-vmmc {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
-			>;
-		};
-
-		pinctrl_hummingboard2_uart3: hummingboard2-uart3 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D25__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D24__UART3_RX_DATA	0x40013000
-			>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_pcie_reset>;
-	reset-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_pwm3>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>;
-	vbus-supply = <&v_usb1>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <
-		&pinctrl_hummingboard2_usdhc2_aux
-		&pinctrl_hummingboard2_usdhc2
-	>;
-	pinctrl-1 = <
-		&pinctrl_hummingboard2_usdhc2_aux
-		&pinctrl_hummingboard2_usdhc2_100mhz
-	>;
-	pinctrl-2 = <
-		&pinctrl_hummingboard2_usdhc2_aux
-		&pinctrl_hummingboard2_usdhc2_200mhz
-	>;
-	vmmc-supply = <&v_sd>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_uart3>;
-	status = "okay";
-};
-
-&vcc_3v3 {
-	vin-supply = <&v_3v2>;
-};
diff --git a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
deleted file mode 100644
index df8fa169e9f6..000000000000
--- a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- *
- * Copyright 2013-2021 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>, <&pinctrl_enet_fix>;
-};
-
-&i2c1 {
-	lm75: temperature-sensor@49 {
-		compatible = "national,lm75";
-		reg = <0x49>;
-	};
-
-	m24c64_57: eeprom@57 {
-		compatible = "atmel,24c64";
-		reg = <0x57>;
-		pagesize = <32>;
-	};
-
-	rtc0: rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
deleted file mode 100644
index 7d1cd7454c7f..000000000000
--- a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- *
- * Copyright 2013-2021 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_recovery>;
-	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c3 {
-	lm75: temperature-sensor@49 {
-		compatible = "national,lm75";
-		reg = <0x49>;
-	};
-
-	m24c64_57: eeprom@57 {
-		compatible = "atmel,24c64";
-		reg = <0x57>;
-		pagesize = <32>;
-	};
-
-	rtc0: rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
deleted file mode 100644
index 0ad4cb4f1e82..000000000000
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ /dev/null
@@ -1,582 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2015 Boundary Devices, Inc.
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_wlan_vmmc: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_wlan_vmmc>;
-			regulator-name = "reg_wlan_vmmc";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <70000>;
-			enable-active-high;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		home {
-			label = "Home";
-			gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
-			linux,code = <102>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
-			linux,code = <158>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		j14-pin1 {
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		j14-pin3 {
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		j14-pins8-9 {
-			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		j46-pin2 {
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		j46-pin3 {
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-	};
-
-	backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds0: backlight-lvds0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	panel-lvds0 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds0>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6dl-nit6xlite-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6dl-nit6xlite-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "microchip,sst25vf016b";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy>;
-	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			txen-skew-ps = <0>;
-			txc-skew-ps = <3000>;
-			rxdv-skew-ps = <0>;
-			rxc-skew-ps = <3000>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	};
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-source;
-	};
-
-	rtc@6f {
-		compatible = "isil,isl1208";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc>;
-		reg = <0x6f>;
-		interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_j10>;
-	pinctrl-1 = <&pinctrl_j28>;
-
-	imx6dl-nit6xlite {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				/* Phy reset */
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio-keysgrp {
-			fsl,pins = <
-				/* Home Button: J14 pin 5 */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-				/* Back Button: J14 pin 7 */
-				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
-				/* Touch IRQ: J7 pin 4 */
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
-				/* tcs2004 IRQ */
-				MX6QDL_PAD_EIM_LBA__GPIO2_IO27	0x1b0b0
-				/* tsc2004 reset */
-				MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x0b0b0
-			>;
-		};
-
-		pinctrl_j10: j10grp {
-			fsl,pins = <
-				/* Broadcom WiFi module pins */
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
-				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x0b0b0
-				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
-				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
-			>;
-		};
-
-		pinctrl_j28: j28grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
-			>;
-		};
-
-		pinctrl_leds: ledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x0b0b0
-				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x0b0b0
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x030b0
-				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x0b0b0
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0b0b0
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_wlan_vmmc: wlan-vmmcgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b0
-			>;
-		};
-
-		pinctrl_rtc: rtcgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b0
-			>;
-		};
-
-		pinctrl_sgtl5000: sgtl5000grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
-			>;
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	non-removable;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_wlan_vmmc>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
deleted file mode 100644
index beaa2dcd436c..000000000000
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ /dev/null
@@ -1,848 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2015 Boundary Devices, Inc.
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0xF0000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_1p8v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "1P8V";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		reg_2p5v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb_h1_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_wlan_vmmc: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_wlan_vmmc>;
-			regulator-name = "reg_wlan_vmmc";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <70000>;
-			enable-active-high;
-		};
-
-		reg_can_xcvr: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_can_xcvr>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		menu {
-			label = "Menu";
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	i2c2mux {
-		compatible = "i2c-mux-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c2mux>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH
-			     &gpio4 15 GPIO_ACTIVE_HIGH>;
-		i2c-parent = <&i2c2>;
-		idle-state = <0>;
-
-		i2c2mux@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c2mux@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	i2c3mux {
-		compatible = "i2c-mux-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3mux>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
-		i2c-parent = <&i2c3>;
-		idle-state = <0>;
-
-		i2c3mux@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		speaker-enable {
-			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		ttymxc4-rs232 {
-			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
-			retain-state-suspended;
-			default-state = "on";
-		};
-	};
-
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds0: backlight-lvds0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds1: backlight-lvds1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_j15>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel-lcd {
-		compatible = "okaya,rs800480t-7x0gp";
-		backlight = <&backlight_lcd>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	panel-lvds0 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds0>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	panel-lvds1 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds1>;
-
-		port {
-			panel_in_lvds1: endpoint {
-				remote-endpoint = <&lvds1_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-nitrogen6_max-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "microchip,sst25vf016b";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy>;
-	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			txen-skew-ps = <0>;
-			txc-skew-ps = <3000>;
-			rxdv-skew-ps = <0>;
-			rxc-skew-ps = <3000>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	rtc: rtc@68 {
-		compatible = "microcrystal,rv4162";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rv4162>;
-		reg = <0x68>;
-		interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	};
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-source;
-	};
-};
-
-&iomuxc {
-	imx6q-nitrogen6-max {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-			>;
-		};
-
-		pinctrl_can_xcvr: can-xcvrgrp {
-			fsl,pins = <
-				/* Flexcan XCVR enable */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				/* Phy reset */
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio-keysgrp {
-			fsl,pins = <
-				/* Power Button */
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-				/* Menu Button */
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-				/* Home Button */
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
-				/* Back Button */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* Volume Up Button */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-				/* Volume Down Button */
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2mux: i2c2muxgrp {
-			fsl,pins = <
-				/* ov5642 camera i2c enable */
-				MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x000b0
-				/* ov5640_mipi camera i2c enable */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15	0x000b0
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c3mux: i2c3muxgrp {
-			fsl,pins = <
-				/* PCIe I2C enable */
-				MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
-			>;
-		};
-
-		pinctrl_j15: j15grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				/* PCIe reset */
-				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x000b0
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT2__PWM2_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_rv4162: rv4162grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
-			>;
-		};
-
-		pinctrl_sgtl5000: sgtl5000grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x130b1
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x030b1
-				/* RS485 RX Enable: pull up */
-				MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b1
-				/* RS485 DEN: pull down */
-				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b1
-				/* RS485/!RS232 Select: pull down (rs232) */
-				MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x030b1
-				/* ON: pull down */
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x030b1
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x0b0b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x100b0
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_wlan_vmmc: wlan-vmmcgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
-				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
-				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
-			>;
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-	};
-
-	lvds-channel@1 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds1_out: endpoint {
-				remote-endpoint = <&panel_in_lvds1>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	non-removable;
-	vmmc-supply = <&reg_wlan_vmmc>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	vmmc-supply = <&reg_1p8v>;
-	keep-power-in-suspend;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
deleted file mode 100644
index 904d5d051d63..000000000000
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ /dev/null
@@ -1,692 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2013 Boundary Devices, Inc.
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-
-		reg_can_xcvr: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_can_xcvr>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-
-		reg_wlan_vmmc: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_wlan_vmmc>;
-			regulator-name = "reg_wlan_vmmc";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <70000>;
-			enable-active-high;
-		};
-
-		reg_usb_h1_vbus: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		menu {
-			label = "Menu";
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-nitrogen6x-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-nitrogen6x-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds: backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_j15>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel-lcd {
-		compatible = "okaya,rs800480t-7x0gp";
-		backlight = <&backlight_lcd>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	panel-lvds0 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "sst,sst25vf016b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0x0 0xc0000>;
-		};
-
-		partition@c0000 {
-			label = "env";
-			reg = <0xc0000 0x2000>;
-		};
-
-		partition@c2000 {
-			label = "splash";
-			reg = <0xc2000 0x13e000>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy>;
-	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			txen-skew-ps = <0>;
-			txc-skew-ps = <3000>;
-			rxdv-skew-ps = <0>;
-			rxc-skew-ps = <3000>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	rtc: rtc@6f {
-		compatible = "isil,isl1208";
-		reg = <0x6f>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	};
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-source;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-nitrogen6x {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* SGTL5000 sys_mclk */
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-			>;
-		};
-
-		pinctrl_can_xcvr: can-xcvrgrp {
-			fsl,pins = <
-				/* Flexcan XCVR enable */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				/* Phy reset */
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x000b0
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio-keysgrp {
-			fsl,pins = <
-				/* Power Button */
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-				/* Menu Button */
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-				/* Home Button */
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
-				/* Back Button */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* Volume Up Button */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-				/* Volume Down Button */
-				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_j15: j15grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17071
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17071
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
-			>;
-		};
-
-		pinctrl_wlan_vmmc: wlan-vmmcgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
-				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
-				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
-			>;
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	non-removable;
-	vmmc-supply = <&reg_wlan_vmmc>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
deleted file mode 100644
index 768bc0e3a2b3..000000000000
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ /dev/null
@@ -1,466 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Phytec phyFLEX-i.MX6 Quad";
-	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb_otg_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio4 15 0>;
-			enable-active-high;
-		};
-
-		reg_usb_h1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1_vbus>;
-			reg = <1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 0 0>;
-			enable-active-high;
-		};
-	};
-
-	gpio_leds: leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-		compatible = "gpio-leds";
-
-		led_green: green {
-			label = "phyflex:green";
-			gpios = <&gpio1 30 0>;
-		};
-
-		led_red: red {
-			label = "phyflex:red";
-			gpios = <&gpio2 31 0>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "disabled";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
-};
-
-&ecspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-
-	som_flash: flash@0 {
-		compatible = "m25p80", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-handle = <&ethphy>;
-	phy-mode = "rgmii";
-	phy-reset-duration = <10>; /* in msecs */
-	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	phy-supply = <&vdd_eth_io_reg>;
-	status = "disabled";
-
-	fec_mdio: mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			txc-skew-ps = <1680>;
-			rxc-skew-ps = <1860>;
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	som_eeprom: eeprom@50 {
-		compatible = "catalyst,24c32", "atmel,24c32";
-		pagesize = <32>;
-		reg = <0x50>;
-	};
-
-	pmic@58 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		compatible = "dlg,da9063";
-		reg = <0x58>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
-		interrupt-controller;
-
-		regulators {
-			vddcore_reg: bcore1 {
-				regulator-min-microvolt = <730000>;
-				regulator-max-microvolt = <1380000>;
-				regulator-always-on;
-			};
-
-			vddsoc_reg: bcore2 {
-				regulator-min-microvolt = <730000>;
-				regulator-max-microvolt = <1380000>;
-				regulator-always-on;
-			};
-
-			vdd_ddr3_reg: bpro {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_reg: bperi {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_buckmem_reg: bmem {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_eth_reg: bio {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vdd_eth_io_reg: ldo4 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vdd_mx6_snvs_reg: ldo5 {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_pmic_io_reg: ldo6 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_sd0_reg: ldo9 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vdd_sd1_reg: ldo10 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vdd_mx6_high_reg: ldo11 {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-		};
-
-		da9063_rtc: rtc {
-			compatible = "dlg,da9063-rtc";
-		};
-
-		da9063_wdog: watchdog {
-			compatible = "dlg,da9063-watchdog";
-		};
-
-		onkey {
-			compatible = "dlg,da9063-onkey";
-			status = "disabled";
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <100000>;
-};
-
-&iomuxc {
-	imx6q-phytec-pfla02 {
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x80000000 /* CS0 */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x80000000 /* Reset GPIO */
-			>;
-		};
-
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_leds: ledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000 /* Green LED */
-				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x80000000 /* Red LED */
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000>;
-		};
-
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <MX6QDL_PAD_SD4_DAT1__GPIO2_IO09	0x80000000>; /* PMIC interrupt */
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh1_vbus: usbh1vbusgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x80000000
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_cdwp: usdhc3cdwp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT16__AUD5_TXC	0x130b0
-				MX6QDL_PAD_DISP0_DAT17__AUD5_TXD	0x110b0
-				MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS	0x130b0
-				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
-			>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 17 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&reg_arm {
-	vin-supply = <&vddcore_reg>;
-};
-
-&reg_pu {
-	vin-supply = <&vddsoc_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&vddsoc_reg>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "disabled";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "disabled";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "disabled";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&vdd_sd1_reg>;
-	status = "disabled";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3
-		     &pinctrl_usdhc3_cdwp>;
-	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&vdd_sd0_reg>;
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
deleted file mode 100644
index de514eb5aa99..000000000000
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ /dev/null
@@ -1,367 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2014 FEDEVEL, Inc.
- *
- * Author: Robert Nelson <robertcnelson@gmail.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usbh1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			pinctrl-names = "default";
-			regulator-name = "usbh1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			pinctrl-names = "default";
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		led0: usr {
-			label = "usr";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6-rex-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6-rex-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pca9535: gpio-expander@27 {
-		compatible = "nxp,pca9535";
-		reg = <0x27>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pca9535>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	eeprom@57 {
-		compatible = "atmel,24c02";
-		reg = <0x57>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-rex {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* SGTL5000 sys_mclk */
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x030b0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				/* CS */
-				MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x000b1
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
-				/* CS */
-				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-				/* Phy reset */
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				/* user led */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000
-			>;
-		};
-
-		pinctrl_pca9535: pca9535grp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x17059
-		   >;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x10b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x10b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				/* CD */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* WP */
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1f0b0
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				/* CD */
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
-				/* WP */
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1f0b0
-			>;
-		};
-	};
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
deleted file mode 100644
index 1368a4762037..000000000000
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ /dev/null
@@ -1,863 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		user {
-			label = "debug";
-			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		home {
-			label = "Home";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			wakeup-source;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			wakeup-source;
-		};
-
-		program {
-			label = "Program";
-			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PROGRAM>;
-			wakeup-source;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-		};
-	};
-
-	clocks {
-		codec_osc: anaclk2 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24576000>;
-		};
-	};
-
-	reg_audio: regulator-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "cs42888_supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_can_en: regulator-can-en {
-		compatible = "regulator-fixed";
-		regulator-name = "can-en";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&max7310_b 6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_can_stby: regulator-can-stby {
-		compatible = "regulator-fixed";
-		regulator-name = "can-stby";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&reg_can_en>;
-	};
-
-	sound-cs42888 {
-		compatible = "fsl,imx6-sabreauto-cs42888",
-			"fsl,imx-audio-cs42888";
-		model = "imx-cs42888";
-		audio-cpu = <&esai>;
-		audio-asrc = <&asrc>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"Line Out Jack", "AOUT1L",
-			"Line Out Jack", "AOUT1R",
-			"Line Out Jack", "AOUT2L",
-			"Line Out Jack", "AOUT2R",
-			"Line Out Jack", "AOUT3L",
-			"Line Out Jack", "AOUT3R",
-			"Line Out Jack", "AOUT4L",
-			"Line Out Jack", "AOUT4R",
-			"AIN1L", "Line In Jack",
-			"AIN1R", "Line In Jack",
-			"AIN2L", "Line In Jack",
-			"AIN2R", "Line In Jack";
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif",
-			   "fsl,imx-sabreauto-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		status = "okay";
-	};
-
-	i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3mux>;
-		mux-gpios = <&gpio5 4 0>;
-		i2c-parent = <&i2c3>;
-		idle-state = <0>;
-
-		i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			adv7180: camera@21 {
-				compatible = "adi,adv7180";
-				reg = <0x21>;
-				powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>;
-				interrupt-parent = <&gpio1>;
-				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-
-				port {
-					adv7180_to_ipu1_csi0_mux: endpoint {
-						remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-						bus-width = <8>;
-					};
-				};
-			};
-
-			max7310_a: gpio@30 {
-				compatible = "maxim,max7310";
-				reg = <0x30>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			max7310_b: gpio@32 {
-				compatible = "maxim,max7310";
-				reg = <0x32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_max7310>;
-				reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-			};
-
-			max7310_c: gpio@34 {
-				compatible = "maxim,max7310";
-				reg = <0x34>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			light-sensor@44 {
-				compatible = "isil,isl29023";
-				reg = <0x44>;
-				interrupt-parent = <&gpio5>;
-				interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
-			};
-
-			magnetometer@e {
-				compatible = "fsl,mag3110";
-				reg = <0x0e>;
-				interrupt-parent = <&gpio2>;
-				interrupts = <29 IRQ_TYPE_EDGE_RISING>;
-			};
-
-			accelerometer@1c {
-				compatible = "fsl,mma8451";
-				reg = <0x1c>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mma8451_int>;
-				interrupt-parent = <&gpio6>;
-				interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
-			};
-		};
-	};
-};
-
-&ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <8>;
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
-	bus-width = <8>;
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
-			  <&clks IMX6QDL_PLL4_BYPASS>,
-			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
-			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
-				 <&clks IMX6QDL_PLL4_BYPASS_SRC>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-	assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
-	status = "disabled"; /* pin conflict with WEIM NOR */
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p32", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&esai {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esai>;
-	assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
-			  <&clks IMX6QDL_CLK_ESAI_EXTAL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <0>, <24576000>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	fsl,magic-packet;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can_stby>;
-	status = "disabled"; /* pin conflict with fec */
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can_stby>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi_cec>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	codec: cs42888@48 {
-		compatible = "cirrus,cs42888";
-		reg = <0x48>;
-		clocks = <&codec_osc>;
-		clock-names = "mclk";
-		VA-supply = <&reg_audio>;
-		VD-supply = <&reg_audio>;
-		VLS-supply = <&reg_audio>;
-		VLC-supply = <&reg_audio>;
-	};
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_egalax_int>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-sabreauto {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
-				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
-				MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			>;
-		};
-
-		pinctrl_ecspi1_cs: ecspi1cs {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
-			>;
-		};
-
-		pinctrl_egalax_int: egalax-intgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_esai: esaigrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
-				MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
-				MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
-				MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
-				MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
-				MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
-				MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
-				MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
-				MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
-				MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
-			>;
-		};
-
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x17059
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x17059
-			>;
-		};
-
-		pinctrl_flexcan2: flexcan2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x17059
-				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x17059
-			>;
-		};
-
-		pinctrl_gpio_keys: gpiokeysgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__GPIO1_IO11		0x1b0b0
-				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x1b0b0
-				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12		0x1b0b0
-				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b0
-				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
-			>;
-		};
-
-		pinctrl_hdmi_cec: hdmicecgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL  0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3mux: i2c3muxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0b0b1
-			>;
-		};
-
-		pinctrl_ipu1_csi0: ipu1csi0grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0x1b0b0
-				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
-				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0x1b0b0
-				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0x1b0b0
-			>;
-		};
-
-		pinctrl_max7310: max7310grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0
-			>;
-		};
-
-		pinctrl_mma8451_int: mma8451intgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0xb0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_gpt_input_capture0: gptinputcapture0grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1	0x1b0b0
-			>;
-		};
-
-		pinctrl_gpt_input_capture1: gptinputcapture1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2	0x1b0b0
-			>;
-		};
-
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
-			>;
-		};
-
-		pinctrl_weim_cs0: weimcs0grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
-			>;
-		};
-
-		pinctrl_weim_nor: weimnorgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
-				MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
-				MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb060
-				MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
-				MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
-				MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
-				MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
-				MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
-				MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
-				MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
-				MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
-				MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
-				MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
-				MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
-				MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
-				MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
-				MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
-				MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
-				MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
-				MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
-				MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
-				MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
-				MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
-				MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
-				MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
-				MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
-				MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
-				MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
-				MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
-				MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
-				MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
-				MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
-				MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
-				MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
-				MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
-				MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
-				MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
-				MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
-				MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
-				MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
-				MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
-				MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
-				MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
-			>;
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pwm3 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
-	ranges = <0 0 0x08000000 0x08000000>;
-	status = "disabled"; /* pin conflict with SPI NOR */
-
-	nor@0,0 {
-		compatible = "cfi-flash";
-		reg = <0 0 0x02000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		bank-width = <2>;
-		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
-				0x0000c000 0x1404a38e 0x00000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
deleted file mode 100644
index 901b9a761b66..000000000000
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ /dev/null
@@ -1,778 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/clock/imx6qdl-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-
-		reg_can_xcvr: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_can_xcvr>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-
-		reg_1p5v: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "1P5V";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-		};
-
-		reg_1p8v: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "1P8V";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		reg_2p8v: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "2P8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			regulator-always-on;
-		};
-
-		reg_usb_h1_vbus: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	mipi_xclk: mipi_xclk {
-		compatible = "pwm-clock";
-		#clock-cells = <0>;
-		clock-frequency = <22000000>;
-		clock-output-names = "mipi_pwm3";
-		pwms = <&pwm3 0 45>; /* 1 / 45 ns = 22 MHz */
-		status = "okay";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		menu {
-			label = "Menu";
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-sabrelite-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-sabrelite-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds: backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_j15>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel-lcd {
-		compatible = "okaya,rs800480t-7x0gp";
-		backlight = <&backlight_lcd>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	panel-lvds0 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <8>;
-	data-shift = <12>; /* Lines 19:12 used */
-	hsync-active = <1>;
-	vync-active = <1>;
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "sst,sst25vf016b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy>;
-	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			txen-skew-ps = <0>;
-			txc-skew-ps = <3000>;
-			rxdv-skew-ps = <0>;
-			rxc-skew-ps = <3000>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ov5640: camera@40 {
-		compatible = "ovti,ov5640";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x40>;
-		clocks = <&mipi_xclk>;
-		clock-names = "xclk";
-		DOVDD-supply = <&reg_1p8v>;
-		AVDD-supply = <&reg_2p8v>;
-		DVDD-supply = <&reg_1p5v>;
-		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* NANDF_D5 */
-		powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */
-
-		port {
-			ov5640_to_mipi_csi2: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-
-	ov5642: camera@42 {
-		compatible = "ovti,ov5642";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5642>;
-		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-names = "xclk";
-		reg = <0x42>;
-		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-		powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		gp-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-
-		port {
-			ov5642_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-				bus-width = <8>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-sabrelite {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* SGTL5000 sys_mclk */
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-			>;
-		};
-
-		pinctrl_can_xcvr: can-xcvrgrp {
-			fsl,pins = <
-				/* Flexcan XCVR enable */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				/* Phy reset */
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x000b0
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio-keysgrp {
-			fsl,pins = <
-				/* Power Button */
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-				/* Menu Button */
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-				/* Home Button */
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
-				/* Back Button */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* Volume Up Button */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-				/* Volume Down Button */
-				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_ipu1_csi0: ipu1csi0grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
-				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
-				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
-				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
-				MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x1b0b0
-			>;
-		};
-
-		pinctrl_j15: j15grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-			>;
-		};
-
-		pinctrl_ov5640: ov5640grp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_D5__GPIO2_IO05   0x000b0
-				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0
-			>;
-		};
-
-		pinctrl_ov5642: ov5642grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
-				MX6QDL_PAD_GPIO_6__GPIO1_IO06   0x1b0b0
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08   0x130b0
-				MX6QDL_PAD_GPIO_3__CCM_CLKO2    0x000b0
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0	/* WP */
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
-			>;
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&mipi_csi {
-	status = "okay";
-
-	port@0 {
-		reg = <0>;
-
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&ov5640_to_mipi_csi2>;
-			clock-lanes = <0>;
-			data-lanes = <1 2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
deleted file mode 100644
index 37482a9023fc..000000000000
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ /dev/null
@@ -1,851 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-#include <dt-bindings/clock/imx6qdl-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&swbst_reg>;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&swbst_reg>;
-	};
-
-	reg_audio: regulator-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "wm8962-supply";
-		gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_pcie: regulator-pcie {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcie_reg>;
-		regulator-name = "MPCIE_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_sensors: regulator-sensors {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sensors_reg>;
-		regulator-name = "sensors-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-			linux,code = <KEY_POWER>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-sabresd-wm8962",
-			   "fsl,imx-audio-wm8962";
-		model = "wm8962-audio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hp>;
-		ssi-controller = <&ssi2>;
-		audio-codec = <&codec>;
-		audio-asrc = <&asrc>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC",
-			"DMIC", "MICBIAS",
-			"DMICDAT", "DMIC";
-		mux-int-port = <2>;
-		mux-ext-port = <3>;
-		hp-det-gpio = <&gpio7 8 GPIO_ACTIVE_LOW>;
-		mic-det-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	};
-
-	backlight_lvds: backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		status = "okay";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		red {
-			gpios = <&gpio1 2 0>;
-			default-state = "on";
-		};
-	};
-
-	panel {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <8>;
-	data-shift = <12>; /* Lines 19:12 used */
-	hsync-active = <1>;
-	vsync-active = <1>;
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-};
-
-&mipi_csi {
-	status = "okay";
-
-	port@0 {
-		reg = <0>;
-
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&ov5640_to_mipi_csi2>;
-			clock-lanes = <0>;
-			data-lanes = <1 2>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p32", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&phy>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy: ethernet-phy@1 {
-			reg = <1>;
-			qca,clk-out-frequency = <125000000>;
-			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-		};
-	};
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi_cec>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: wm8962@1a {
-		compatible = "wlf,wm8962";
-		reg = <0x1a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		DCVDD-supply = <&reg_audio>;
-		DBVDD-supply = <&reg_audio>;
-		AVDD-supply = <&reg_audio>;
-		CPVDD-supply = <&reg_audio>;
-		MICVDD-supply = <&reg_audio>;
-		PLLVDD-supply = <&reg_audio>;
-		SPKVDD1-supply = <&reg_audio>;
-		SPKVDD2-supply = <&reg_audio>;
-		gpio-cfg = <
-			0x0000 /* 0:Default */
-			0x0000 /* 1:Default */
-			0x0013 /* 2:FN_DMICCLK */
-			0x0000 /* 3:Default */
-			0x8014 /* 4:FN_DMICCDAT */
-			0x0000 /* 5:Default */
-		>;
-	};
-
-	accelerometer@1c {
-		compatible = "fsl,mma8451";
-		reg = <0x1c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c1_mma8451_int>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
-		vdd-supply = <&reg_sensors>;
-		vddio-supply = <&reg_sensors>;
-	};
-
-	ov5642: camera@3c {
-		compatible = "ovti,ov5642";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5642>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		clock-names = "xclk";
-		reg = <0x3c>;
-		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
-		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
-						rev B board is VGEN5 */
-		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
-		powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-		status = "disabled";
-
-		port {
-			ov5642_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-				bus-width = <8>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
-	};
-
-	ov5640: camera@3c {
-		compatible = "ovti,ov5640";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x3c>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		clock-names = "xclk";
-		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
-		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
-						rev B board is VGEN5 */
-		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
-		powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-
-		port {
-			ov5640_to_mipi_csi2: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	egalax_ts@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <7 2>;
-		wakeup-gpios = <&gpio6 7 0>;
-	};
-
-	magnetometer@e {
-		compatible = "fsl,mag3110";
-		reg = <0x0e>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
-		vdd-supply = <&reg_sensors>;
-		vddio-supply = <&reg_sensors>;
-	};
-
-	light-sensor@44 {
-		compatible = "isil,isl29023";
-		reg = <0x44>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3_isl29023_int>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		vcc-supply = <&reg_sensors>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-sabresd {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
-				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
-				MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
-				MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
-				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio_keysgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1b0b0
-				MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x1b0b0
-			>;
-		};
-
-		pinctrl_hdmi_cec: hdmicecgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
-			>;
-		};
-
-		pinctrl_hp: hpgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_RST__GPIO7_IO08          0x1b0b0
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0xb0b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2_egalax_int: i2c2egalaxintgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0xb0b1
-			>;
-		};
-
-		pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D16__GPIO3_IO16		0xb0b1
-			>;
-		};
-
-		pinctrl_ipu1_csi0: ipu1csi0grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
-				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
-				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
-				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
-			>;
-		};
-
-		pinctrl_ov5640: ov5640grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0
-				MX6QDL_PAD_SD1_CLK__GPIO1_IO20  0x1b0b0
-			>;
-		};
-
-		pinctrl_ov5642: ov5642grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
-				MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
-			>;
-		};
-
-		pinctrl_pcie_reg: pciereggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x1b0b0
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_sensors_reg: sensorsreggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
-				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
-				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
-				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_wdog: wdoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
-			>;
-		};
-	};
-
-	gpio_leds {
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
-			>;
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie>;
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&reg_arm {
-       vin-supply = <&sw1a_reg>;
-};
-
-&reg_pu {
-       vin-supply = <&sw1c_reg>;
-};
-
-&reg_soc {
-       vin-supply = <&sw1c_reg>;
-};
-
-&reg_vdd1p1 {
-	vin-supply = <&vgen5_reg>;
-};
-
-&reg_vdd2p5 {
-	vin-supply = <&vgen5_reg>;
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <8>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	no-1-8-v;
-	status = "okay";
-};
-
-&wdog1 {
-	status = "disabled";
-};
-
-&wdog2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
deleted file mode 100644
index 8254bce1b8a2..000000000000
--- a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
-
-&ecspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	touchscreen@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch>;
-		compatible = "ti,tsc2046";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
-		vcc-supply = <&reg_3v3>;
-		pendown-gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
-		ti,x-plate-ohms = /bits/ 16 <850>;
-		ti,y-plate-ohms = /bits/ 16 <295>;
-		ti,pressure-min = /bits/ 16 <2>;
-		ti,pressure-max = /bits/ 16 <1500>;
-		ti,vref-mv = /bits/ 16 <3300>;
-		ti,settle-delay-usec = /bits/ 16 <15>;
-		ti,vref-delay-usecs = /bits/ 16 <0>;
-		ti,penirq-recheck-delay-usecs = /bits/ 16 <100>;
-		ti,debounce-max = /bits/ 16 <100>;
-		ti,debounce-tol = /bits/ 16 <(~0)>;
-		ti,debounce-rep = /bits/ 16 <4>;
-		touchscreen-swapped-x-y;
-		touchscreen-inverted-y;
-		wakeup-source;
-	};
-};
-
-&iomuxc {
-	pinctrl_ecspi4: ecspi4grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI			0x100b1
-			MX6QDL_PAD_EIM_D22__ECSPI4_MISO			0x000b1
-			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK			0x000b1
-			/* *no* external pull up */
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x40000058
-		>;
-	};
-
-	pinctrl_touch: touchgrp {
-		fsl,pins = <
-			/* external pull up */
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x10040
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-solidsense.dtsi b/arch/arm/boot/dts/imx6qdl-solidsense.dtsi
deleted file mode 100644
index 234827e554d0..000000000000
--- a/arch/arm/boot/dts/imx6qdl-solidsense.dtsi
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Copyright (C) 2021 Russell King <rmk@armlinux.org.uk>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/leds/common.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_solidsense_leds>;
-
-		/* Red/Green LED1 - next to WiFi SMA */
-		led-11 {
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <0>;
-			gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-		};
-
-		led-12 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <0>;
-			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-		};
-
-		/* Red/Green LED2 - next to GPS SMA */
-		led-21 {
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <1>;
-			gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-		};
-
-		led-22 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <1>;
-			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&audio {
-	status = "disabled";
-};
-
-&ecspi2 {
-	status = "disabled";
-};
-
-&i2c3 {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_hog>, <&pinctrl_solidsense_hog>;
-
-	solidsense {
-		pinctrl_solidsense_hog: solidsense-hog {
-			fsl,pins = <
-				/* Nordic RESET_N */
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x400130b1
-				/* Nordic Chip 1 SWDIO - GPIO 125 */
-				MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x400130b1
-				/* Nordic Chip 1 SWDCLK - GPIO 59 */
-				/* already claimed in the HB2 hogs */
-				/* MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 */
-				/* Nordic Chip 2 SWDIO - GPIO 81 */
-				MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x400130b1
-				/* Nordic Chip 2 SWCLK - GPIO 82 */
-				MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x400130b1
-			>;
-		};
-
-		pinctrl_solidsense_leds: solidsense-leds {
-			fsl,pins = <
-				/* Red LED 1 - GPIO 58 */
-				MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x400130b1
-				/* Green LED 1 - GPIO 55 */
-				MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x400130b1
-				/* Red LED 2 - GPIO 57 */
-				MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x400130b1
-				/* Green LED 2 - GPIO 56 */
-				MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x400130b1
-			>;
-		};
-
-		pinctrl_solidsense_uart2: solidsense-uart2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_solidsense_uart3: solidsense-uart3 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			>;
-		};
-	};
-};
-
-&pwm1 {
-	status = "disabled";
-};
-
-&sgtl5000 {
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_solidsense_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_solidsense_uart3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi
deleted file mode 100644
index b55af61dfeca..000000000000
--- a/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/gpio/gpio.h>
-/ {
-	clk_brcm: brcm-clock {
-		compatible = "gpio-gate-clock";
-		#clock-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_microsom_brcm_osc>;
-		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_brcm: brcm-reg {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 19 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
-		regulator-name = "brcm_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <200000>;
-	};
-
-	usdhc1_pwrseq: usdhc1_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>,
-			      <&gpio6 0 GPIO_ACTIVE_LOW>;
-		clocks = <&clk_brcm>;
-		clock-names = "ext_clock";
-	};
-};
-
-&iomuxc {
-	microsom {
-		pinctrl_microsom_brcm_bt: microsom-brcm-bt {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
-				MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x40013070
-				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_brcm_osc: microsom-brcm-osc {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_brcm_reg: microsom-brcm-reg {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x40013070
-			>;
-		};
-
-		pinctrl_microsom_brcm_wifi: microsom-brcm-wifi {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
-				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x40013070
-				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
-				MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_uart4: microsom-uart4 {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
-			>;
-		};
-
-		pinctrl_microsom_usdhc1: microsom-usdhc1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-			>;
-		};
-	};
-};
-
-/* UART4 - Connected to optional BRCM Wifi/BT/FM */
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>;
-	bus-width = <4>;
-	mmc-pwrseq = <&usdhc1_pwrseq>;
-	keep-power-in-suspend;
-	no-1-8-v;
-	non-removable;
-	vmmc-supply = <&reg_brcm>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
deleted file mode 100644
index ce543e325cd3..000000000000
--- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	vcc_3v3: regulator-vcc-3v3 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-name = "vcc_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
-	phy-mode = "rgmii-id";
-
-	/*
-	 * The PHY seems to require a long-enough reset duration to avoid
-	 * some rare issues where the PHY gets stuck in an inconsistent and
-	 * non-functional state at boot-up. 10ms proved to be fine .
-	 */
-	phy-reset-duration = <10>;
-	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/*
-		 * The PHY can appear at either address 0 or 4 due to the
-		 * configuration (LED) pin not being pulled sufficiently.
-		 */
-		ethernet-phy@0 {
-			reg = <0>;
-			qca,clk-out-frequency = <125000000>;
-			qca,smarteee-tw-us-1g = <24>;
-		};
-
-		ethernet-phy@4 {
-			reg = <4>;
-			qca,clk-out-frequency = <125000000>;
-			qca,smarteee-tw-us-1g = <24>;
-		};
-
-		/*
-		 * ADIN1300 (som rev 1.9 or later) is always at address 1. It
-		 * will be enabled automatically by U-Boot if detected.
-		 */
-		ethernet-phy@1 {
-			reg = <1>;
-			adi,phy-output-clock = "125mhz-free-running";
-			status = "disabled";
-		};
-	};
-};
-
-&iomuxc {
-	microsom {
-		pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				/* AR8035 reset */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0
-				/* AR8035 interrupt */
-				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
-				/* GPIO16 -> AR8035 25MHz */
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x13030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
-				/* AR8035 pin strapping: IO voltage: pull up */
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				/* AR8035 pin strapping: PHYADDR#0: pull down */
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
-				/* AR8035 pin strapping: PHYADDR#1: pull down */
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
-				/* AR8035 pin strapping: MODE#1: pull up */
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				/* AR8035 pin strapping: MODE#3: pull up */
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				/* AR8035 pin strapping: MODE#0: pull down */
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
-
-				/*
-				 * As the RMII pins are also connected to RGMII
-				 * so that an AR8030 can be placed, set these
-				 * to high-z with the same pulls as above.
-				 * Use the GPIO settings to avoid changing the
-				 * input select registers.
-				 */
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x03000
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x03000
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x03000
-			>;
-		};
-
-		pinctrl_microsom_uart1: microsom-uart1 {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_uart1>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
deleted file mode 100644
index dd0925766440..000000000000
--- a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-&i2c3 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_recovery>;
-	scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	pmic: pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-	};
-
-	sensor@48 {
-		compatible = "national,lm75";
-		reg = <0x48>;
-	};
-
-	eeprom@50 {
-		compatible = "st,24c64", "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi
deleted file mode 100644
index 79f2354886b7..000000000000
--- a/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/ {
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd1_pwr>;
-		enable-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		power-supply = <&reg_3v3>;
-		turn-on-delay-ms = <35>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	lcd_panel: lcd-panel {
-		compatible = "edt,etm0700g0dh6";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd0_pwr>;
-		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-		power-supply = <&reg_3v3>;
-		backlight = <&backlight>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_out>;
-			};
-		};
-	};
-
-	display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-
-		display-timings {
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				u-boot,panel-name = "edt,et057090dhu";
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				u-boot,panel-name = "edt,et0350g0dh6";
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				u-boot,panel-name = "edt,et0430g0dh6";
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				u-boot,panel-name = "edt,etm0700g0dh6";
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			CoMTFT { /* same as ET0700 but with inverted pixel clock */
-				u-boot,panel-name = "edt,etm0700g0edh6";
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_in>;
-};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
deleted file mode 100644
index 2ca2eb37e14f..000000000000
--- a/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/ {
-	aliases {
-		display = &lvds0;
-		lvds0 = &lvds0;
-		lvds1 = &lvds1;
-	};
-
-	backlight0: backlight0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_lcd0_pwr>;
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	backlight1: backlight1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 0>;
-		power-supply = <&reg_lcd1_pwr>;
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	lvds0_panel: lvds0-panel {
-		compatible = "nlt,nl12880bc20-spwg-24";
-		backlight = <&backlight0>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	lvds1_panel: lvds1-panel {
-		compatible = "nlt,nl12880bc20-spwg-24";
-		backlight = <&backlight1>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in_lvds1: endpoint {
-				remote-endpoint = <&lvds1_out>;
-			};
-		};
-	};
-};
-
-&kpp {
-	status = "disabled"; /* pad conflict with backlight1 PWM */
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-width = <18>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-
-		display-timings {
-			hsd100pxn1 {
-				u-boot,panel-name = "hannstar,hsd100pxn1";
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vfront-porch = <12>;
-				hsync-len = <96>;
-				vsync-len = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			nl12880bc20 {
-				u-boot,panel-name = "nlt,nl12880bc20-spwg-24";
-				clock-frequency = <71000000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <50>;
-				hfront-porch = <50>;
-				vback-porch = <5>;
-				vfront-porch = <5>;
-				hsync-len = <60>;
-				vsync-len = <13>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0700 {
-				u-boot,panel-name = "edt,etm0700g0dh6";
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				u-boot,panel-name = "edt,et057090dhu";
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-
-	lvds1: lvds-channel@1 {
-		fsl,data-width = <18>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds1_out: endpoint {
-				remote-endpoint = <&panel_in_lvds1>;
-			};
-		};
-
-		display-timings {
-			hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vfront-porch = <12>;
-				hsync-len = <96>;
-				vsync-len = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			nl12880bc20 {
-				clock-frequency = <71000000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <50>;
-				hfront-porch = <50>;
-				vback-porch = <5>;
-				vfront-porch = <5>;
-				hsync-len = <60>;
-				vsync-len = <13>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&reg_lcd0_pwr {
-	status = "okay";
-};
-
-&reg_lcd1_pwr {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
deleted file mode 100644
index 99ec7a838f8d..000000000000
--- a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/ {
-	backlight0 {
-		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
-		turn-on-delay-ms = <35>;
-		power-supply = <&reg_lcd1_pwr>;
-	};
-
-	backlight1 {
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		turn-on-delay-ms = <35>;
-		power-supply = <&reg_lcd1_pwr>;
-	};
-
-	lcd-panel {
-		compatible = "edt,et057090dhu";
-		pixelclk-active = <0>;
-	};
-
-	lvds0-panel {
-		compatible = "edt,etml1010g0dka";
-		pixelclk-active = <0>;
-	};
-
-	lvds1-panel {
-		compatible = "edt,etml1010g0dka";
-		pixelclk-active = <0>;
-	};
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&ds1339 {
-	/*
-	 * The backup voltage of the module internal RTC is not wired
-	 * by default on the MB7, so disable that RTC chip.
-	 */
-	status = "disabled";
-};
-
-&i2c3 {
-	rtc: rtc@6f {
-		compatible = "microchip,mcp7940x";
-		reg = <0x6f>;
-	};
-};
-
-&reg_lcd0_pwr {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
deleted file mode 100644
index 93a8123da27d..000000000000
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ /dev/null
@@ -1,327 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	aliases {
-		backlight = &backlight;
-		panelchan = &panelchan;
-		panel7 = &panel7;
-		touchscreenp7 = &touchscreenp7;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	backlight: backlight {
-		compatible = "gpio-backlight";
-		gpios = <&gpio1 4 0>;
-		default-on;
-		status = "disabled";
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio2 4 0>;
-		pinctrl-0 = <&pinctrl_power_off>;
-		pinctrl-names = "default";
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	panel7: panel7 {
-		/*
-		 * in reality it is a -20t (parallel) model,
-		 * but with LVDS bridge chip attached,
-		 * so it is equivalent to -19t model in drive
-		 * characteristics
-		 */
-		compatible = "urt,umsh-8596md-19t";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_panel>;
-		power-supply = <&reg_panel>;
-		backlight = <&backlight>;
-		status = "disabled";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb_h1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
-			gpio = <&gpio7 12 0>;
-		};
-
-		reg_panel: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "lcd_panel";
-			enable-active-high;
-			gpio = <&gpio1 2 0>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-udoo-ac97",
-			     "fsl,imx-audio-ac97";
-		model = "fsl,imx6q-udoo-ac97";
-		audio-cpu = <&ssi1>;
-		audio-routing =
-			"RX", "Mic Jack",
-			"Headphone Jack", "TX";
-		mux-int-port = <1>;
-		mux-ext-port = <6>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreenp7: touchscreenp7@55 {
-		compatible = "sitronix,st1232";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touchscreenp7>;
-		reg = <0x55>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <13 8>;
-		gpios = <&gpio1 15 0>;
-		status = "disabled";
-	};
-};
-
-&iomuxc {
-	imx6q-udoo {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001f8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001f8b1
-			>;
-		};
-
-		pinctrl_panel: panelgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x70
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x70
-			>;
-		};
-
-		pinctrl_power_off: poweroffgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x30
-			>;
-		};
-
-		pinctrl_touchscreenp7: touchscreenp7grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15		0x70
-				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh: usbhgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
-				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotg {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-				MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x17059
-				MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
-			>;
-		};
-
-		pinctrl_ac97_running: ac97running {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
-				MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x1b0b0
-				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
-				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
-				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
-			>;
-		};
-
-		pinctrl_ac97_warm_reset: ac97warmreset {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
-				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
-				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
-				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
-				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
-			>;
-		};
-
-		pinctrl_ac97_reset: ac97reset {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
-				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
-				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
-				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
-				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
-			>;
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	panelchan: lvds-channel@0 {
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh>;
-	vbus-supply = <&reg_usb_h1_vbus>;
-	clocks = <&clks IMX6QDL_CLK_CKO>;
-	status = "disabled";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&audmux {
-	status = "okay";
-};
-
-&ssi1 {
-	cell-index = <0>;
-	fsl,mode = "ac97-slave";
-	pinctrl-names = "ac97-running", "ac97-reset", "ac97-warm-reset";
-	pinctrl-0 = <&pinctrl_ac97_running>;
-	pinctrl-1 = <&pinctrl_ac97_reset>;
-	pinctrl-2 = <&pinctrl_ac97_warm_reset>;
-	ac97-gpios = <&gpio4 19 0 &gpio4 18 0 &gpio2 30 0>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
deleted file mode 100644
index e781a45785ed..000000000000
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2013 Freescale Semiconductor, Inc.
-//
-// Author: Fabio Estevam <fabio.estevam@freescale.com>
-
-#include "imx6qdl-wandboard.dtsi"
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-wandboard {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
-				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x0f0b0		/* WL_REF_ON */
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x0f0b0		/* WL_RST_N */
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE */
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE */
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
-				MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x80000000	/* BT_ON */
-				MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x80000000	/* BT_WAKE */
-				MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x80000000	/* BT_HOST_WAKE */
-			>;
-		};
-	};
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	non-removable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
deleted file mode 100644
index 3874e74703f0..000000000000
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2013 Freescale Semiconductor, Inc.
-//
-// Author: Fabio Estevam <fabio.estevam@freescale.com>
-
-#include "imx6qdl-wandboard.dtsi"
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-wandboard {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
-				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x0f0b0		/* WIFI_ON (reset, active low) */
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON (unused) */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE, input */
-				MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x0f0b0		/* GPIO5_IO31 (Wifi Power Enable) */
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE (unused) */
-				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x80000000	/* BT_ON */
-				MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x80000000	/* BT_WAKE */
-				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x80000000	/* BT_HOST_WAKE */
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
-			>;
-		};
-	};
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
deleted file mode 100644
index bf86b639fdac..000000000000
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
+++ /dev/null
@@ -1,193 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2013 Freescale Semiconductor, Inc.
-//
-// Author: Fabio Estevam <fabio.estevam@freescale.com>
-
-#include "imx6qdl-wandboard.dtsi"
-
-/ {
-	reg_eth_phy: regulator-eth-phy {
-		compatible = "regulator-fixed";
-		regulator-name = "ETH_PHY";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio7 13 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&fec {
-	phy-supply = <&reg_eth_phy>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-wandboard {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* USDHC1 CD */
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29   	0x1f0b1		/* RGMII PHY reset */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_19__SPDIF_OUT		0x1b0b0
-			>;
-		};
-	};
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	no-1-8-v;
-	non-removable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
deleted file mode 100644
index ec6fba5ee8fd..000000000000
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ /dev/null
@@ -1,379 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	sound {
-		compatible = "fsl,imx6-wandboard-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6-wandboard-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-
-	reg_1p5v: regulator-1p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P5V";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-always-on;
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	reg_2p8v: regulator-2p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		regulator-always-on;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usbotgvbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotgvbus>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c1>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mclk>;
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-		lrclk-strength = <3>;
-	};
-
-	camera@3c {
-		compatible = "ovti,ov5645";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5645>;
-		reg = <0x3c>;
-		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-names = "xclk";
-		clock-frequency = <24000000>;
-		vdddo-supply = <&reg_1p8v>;
-		vdda-supply = <&reg_2p8v>;
-		vddd-supply = <&reg_1p5v>;
-		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
-
-		port {
-			ov5645_to_mipi_csi2: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-
-	imx6qdl-wandboard {
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c1_gpio: i2c1gpiogrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b0
-				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2_gpio: i2c2gpiogrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b0
-				MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b0
-			>;
-		};
-
-		pinctrl_mclk: mclkgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
-			>;
-		};
-
-		pinctrl_ov5645: ov5645grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__CCM_CLKO2		0x000b0
-				MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0
-				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
-			>;
-		};
-
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD0__SPDIF_OUT		0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			>;
-		};
-
-		pinctrl_usbotgvbus: usbotgvbusgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x130b0
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy>;
-	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@1 {
-			reg = <1>;
-			qca,clk-out-frequency = <125000000>;
-		};
-	};
-};
-
-&mipi_csi {
-	status = "okay";
-
-	port@0 {
-		reg = <0>;
-
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&ov5645_to_mipi_csi2>;
-			clock-lanes = <0>;
-			data-lanes = <1 2>;
-		};
-	};
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts
deleted file mode 100644
index 2bb3bfb18ec3..000000000000
--- a/arch/arm/boot/dts/imx6qp-sabreauto.dts
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2016 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include "imx6qp.dtsi"
-#include "imx6qdl-sabreauto.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad Plus SABRE Automotive Board";
-	compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
-};
-
-&i2c2 {
-	max7322: gpio@68 {
-		compatible = "maxim,max7322";
-		reg = <0x68>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&iomuxc {
-	imx6qdl-sabreauto {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ENET_MDIO          0x1b0b0
-				MX6QDL_PAD_KEY_COL2__ENET_MDC           0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b018
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b018
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b018
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b018
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b018
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b018
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b018
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b018
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b018
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b018
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b018
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b018
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-	};
-};
-
-&pcie {
-	reset-gpio = <&max7310_c 5 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&vgen3_reg {
-	regulator-always-on;
-};
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
deleted file mode 100644
index f69eec18d865..000000000000
--- a/arch/arm/boot/dts/imx6qp-sabresd.dts
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2016 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include "imx6qp.dtsi"
-#include "imx6qdl-sabresd.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board";
-	compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
-};
-
-&reg_arm {
-	vin-supply = <&sw2_reg>;
-};
-
-&iomuxc {
-	imx6qdl-sabresd {
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
-				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
-				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
-				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-	};
-};
-
-&vgen3_reg {
-	regulator-always-on;
-};
-
-&pcie {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts
deleted file mode 100644
index 92b38e6699aa..000000000000
--- a/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6qp-tx6qp-8037.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-8037 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts
deleted file mode 100644
index ffc0f2ee11d2..000000000000
--- a/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6qp.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6QP-8037 Module";
-	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts
deleted file mode 100644
index 07ad70718aec..000000000000
--- a/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6qp-tx6qp-8137.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-8137 Module on MB7 baseboard";
-	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts
deleted file mode 100644
index dd494d587014..000000000000
--- a/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6qp.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lvds.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6QP-8137 Module";
-	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&sata {
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
deleted file mode 100644
index f16c830f1e91..000000000000
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ /dev/null
@@ -1,658 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-//Copyright (C) 2013 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6sl.dtsi"
-
-/ {
-	model = "Freescale i.MX6 SoloLite EVK Board";
-	compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	backlight_display: backlight_display {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		user {
-			label = "debug";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&swbst_reg>;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&swbst_reg>;
-	};
-
-	reg_aud3v: regulator-aud3v {
-		compatible = "regulator-fixed";
-		regulator-name = "wm8962-supply-3v15";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-		regulator-boot-on;
-	};
-
-	reg_aud4v: regulator-aud4v {
-		compatible = "regulator-fixed";
-		regulator-name = "wm8962-supply-4v2";
-		regulator-min-microvolt = <4325000>;
-		regulator-max-microvolt = <4325000>;
-		regulator-boot-on;
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
-		regulator-name = "lcd-3v3";
-		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_lcd_5v: regulator-lcd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	sound {
-		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hp>;
-		model = "wm8962-audio";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC";
-		mux-int-port = <2>;
-		mux-ext-port = <3>;
-		hp-det-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
-	};
-
-	panel {
-		compatible = "sii,43wvf1g";
-		backlight = <&backlight_display>;
-		dvdd-supply = <&reg_lcd_3v3>;
-		avdd-supply = <&reg_lcd_5v>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux3>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p32", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_fec>;
-	pinctrl-1 = <&pinctrl_fec_sleep>;
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	codec: wm8962@1a {
-		compatible = "wlf,wm8962";
-		reg = <0x1a>;
-		clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
-		DCVDD-supply = <&vgen3_reg>;
-		DBVDD-supply = <&reg_aud3v>;
-		AVDD-supply = <&vgen3_reg>;
-		CPVDD-supply = <&vgen3_reg>;
-		MICVDD-supply = <&reg_aud3v>;
-		PLLVDD-supply = <&vgen3_reg>;
-		SPKVDD1-supply = <&reg_aud4v>;
-		SPKVDD2-supply = <&reg_aud4v>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6sl-evk {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6SL_PAD_KEY_ROW7__GPIO4_IO07    0x17059
-				MX6SL_PAD_KEY_COL7__GPIO4_IO06    0x17059
-				MX6SL_PAD_SD2_DAT7__GPIO5_IO00    0x17059
-				MX6SL_PAD_SD2_DAT6__GPIO4_IO29    0x17059
-				MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
-				MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
-				MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
-				MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
-			>;
-		};
-
-		pinctrl_audmux3: audmux3grp {
-			fsl,pins = <
-				MX6SL_PAD_AUD_RXD__AUD3_RXD	  0x4130b0
-				MX6SL_PAD_AUD_TXC__AUD3_TXC	  0x4130b0
-				MX6SL_PAD_AUD_TXD__AUD3_TXD	  0x4110b0
-				MX6SL_PAD_AUD_TXFS__AUD3_TXFS	  0x4130b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO	0x100b1
-				MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x100b1
-				MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x100b1
-				MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11	0x80000000
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX6SL_PAD_FEC_MDC__FEC_MDC		0x1b0b0
-				MX6SL_PAD_FEC_MDIO__FEC_MDIO		0x1b0b0
-				MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV		0x1b0b0
-				MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0	0x1b0b0
-				MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1	0x1b0b0
-				MX6SL_PAD_FEC_TX_EN__FEC_TX_EN		0x1b0b0
-				MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0	0x1b0b0
-				MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1	0x1b0b0
-				MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT	0x4001b0a8
-			>;
-		};
-
-		pinctrl_fec_sleep: fecgrp-sleep {
-			fsl,pins = <
-				MX6SL_PAD_FEC_MDC__GPIO4_IO23      0x3080
-				MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25   0x3080
-				MX6SL_PAD_FEC_RXD0__GPIO4_IO17     0x3080
-				MX6SL_PAD_FEC_RXD1__GPIO4_IO18     0x3080
-				MX6SL_PAD_FEC_TX_EN__GPIO4_IO22    0x3080
-				MX6SL_PAD_FEC_TXD0__GPIO4_IO24     0x3080
-				MX6SL_PAD_FEC_TXD1__GPIO4_IO16     0x3080
-				MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26  0x3080
-			>;
-		};
-
-		pinctrl_hp: hpgrp {
-			fsl,pins = <
-				MX6SL_PAD_FEC_RX_ER__GPIO4_IO19	  0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6SL_PAD_I2C1_SCL__I2C1_SCL	0x4001b8b1
-				MX6SL_PAD_I2C1_SDA__I2C1_SDA	0x4001b8b1
-			>;
-		};
-
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6SL_PAD_I2C2_SCL__I2C2_SCL	0x4001b8b1
-				MX6SL_PAD_I2C2_SDA__I2C2_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_kpp: kppgrp {
-			fsl,pins = <
-				MX6SL_PAD_KEY_ROW0__KEY_ROW0    0x1b010
-				MX6SL_PAD_KEY_ROW1__KEY_ROW1    0x1b010
-				MX6SL_PAD_KEY_ROW2__KEY_ROW2    0x1b0b0
-				MX6SL_PAD_KEY_COL0__KEY_COL0    0x110b0
-				MX6SL_PAD_KEY_COL1__KEY_COL1    0x110b0
-				MX6SL_PAD_KEY_COL2__KEY_COL2    0x110b0
-			>;
-		};
-
-		pinctrl_lcd: lcdgrp {
-			fsl,pins = <
-				MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0
-				MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0
-				MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0
-				MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0
-				MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0
-				MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0
-				MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0
-				MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0
-				MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0
-				MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0
-				MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0
-				MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0
-				MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0
-				MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0
-				MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0
-				MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0
-				MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0
-				MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0
-				MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0
-				MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0
-				MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0
-				MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0
-				MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0
-				MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0
-				MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0
-				MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0
-				MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0
-				MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0
-			>;
-		};
-
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
-			>;
-		};
-
-		pinctrl_pwm1: pwmgrp {
-			fsl,pins = <
-				MX6SL_PAD_PWM1__PWM1_OUT 0x110b0
-			>;
-		};
-
-		pinctrl_reg_lcd_3v3: reglcd3v3grp {
-			fsl,pins = <
-				MX6SL_PAD_KEY_ROW5__GPIO4_IO03    0x17059
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x1b0b1
-				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg1: usbotg1grp {
-			fsl,pins = <
-				MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID	0x17059
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX6SL_PAD_SD1_CMD__SD1_CMD		0x17059
-				MX6SL_PAD_SD1_CLK__SD1_CLK		0x10059
-				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x17059
-				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x17059
-				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x17059
-				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x17059
-				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x17059
-				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x17059
-				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x17059
-				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170b9
-				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100b9
-				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170b9
-				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170b9
-				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170b9
-				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170b9
-				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170b9
-				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170b9
-				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170b9
-				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170b9
-			>;
-		};
-
-		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170f9
-				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100f9
-				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
-				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
-				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
-				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
-				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170f9
-				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170f9
-				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170f9
-				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170f9
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100b9
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
-			>;
-		};
-
-		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100f9
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170b9
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100b9
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170f9
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100f9
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-			>;
-		};
-	};
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	linux,keymap = <
-			MATRIX_KEY(0x0, 0x0, KEY_UP)         /* ROW0, COL0 */
-			MATRIX_KEY(0x0, 0x1, KEY_DOWN)       /* ROW0, COL1 */
-			MATRIX_KEY(0x0, 0x2, KEY_ENTER)      /* ROW0, COL2 */
-			MATRIX_KEY(0x1, 0x0, KEY_HOME)       /* ROW1, COL0 */
-			MATRIX_KEY(0x1, 0x1, KEY_RIGHT)      /* ROW1, COL1 */
-			MATRIX_KEY(0x1, 0x2, KEY_LEFT)       /* ROW1, COL2 */
-			MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */
-			MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP)   /* ROW2, COL1 */
-	>;
-	status = "okay";
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcd>;
-	status = "okay";
-
-	port {
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&reg_vdd1p1 {
-	vin-supply = <&sw2_reg>;
-};
-
-&reg_vdd2p5 {
-	vin-supply = <&sw2_reg>;
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	bus-width = <8>;
-	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts
deleted file mode 100644
index 9d7c8884892a..000000000000
--- a/arch/arm/boot/dts/imx6sl-warp.dts
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * Copyright 2014, 2015 O.S. Systems Software LTDA.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6sl.dtsi"
-
-/ {
-	model = "Revotics WaRP Board";
-	compatible = "revotics,imx6sl-warp", "fsl,imx6sl";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	usdhc3_pwrseq: usdhc3_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, 	/* WL_REG_ON */
-			      <&gpio4 7 GPIO_ACTIVE_LOW>, 	/* WL_HOSTWAKE */
-			      <&gpio3 25 GPIO_ACTIVE_LOW>, 	/* BT_REG_ON */
-			      <&gpio3 27 GPIO_ACTIVE_LOW>,	/* BT_HOSTWAKE */
-			      <&gpio4 4 GPIO_ACTIVE_LOW>, 	/* BT_WAKE */
-			      <&gpio4 6 GPIO_ACTIVE_LOW>; 	/* BT_RST_N */
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "peripheral";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	bus-width = <4>;
-	non-removable;
-	keep-power-in-suspend;
-	wakeup-source;
-	mmc-pwrseq = <&usdhc3_pwrseq>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx6sl-warp {
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x41b0b1
-				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x41b0b1
-			>;
-		};
-
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6SL_PAD_AUD_RXC__UART3_RX_DATA	0x41b0b1
-				MX6SL_PAD_AUD_RXC__UART3_TX_DATA	0x41b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA	0x41b0b1
-				MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA	0x41b0b1
-				MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B	0x4130b1
-				MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B	0x4130b1
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x417059
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x410059
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x417059
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x417059
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x417059
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x417059
-				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x417059
-				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x417059
-				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x417059
-				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x417059
-				MX6SL_PAD_SD2_RST__SD2_RESET		0x417059
-			>;
-		};
-
-		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170b9
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100b9
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170b9
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170b9
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170b9
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170b9
-				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170b9
-				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170b9
-				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170b9
-				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170b9
-				MX6SL_PAD_SD2_RST__SD2_RESET		0x4170b9
-			>;
-		};
-
-		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170f9
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100f9
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170f9
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170f9
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170f9
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170f9
-				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170f9
-				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170f9
-				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170f9
-				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170f9
-				MX6SL_PAD_SD2_RST__SD2_RESET		0x4170f9
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x417059
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x410059
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x417059
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x417059
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x417059
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x417059
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x4170b9
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x4100b9
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x4170b9
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x4170b9
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x4170b9
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x4170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x4170f9
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x4100f9
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x4170f9
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x4170f9
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x4170f9
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x4170f9
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
deleted file mode 100644
index c6e85e4a0883..000000000000
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ /dev/null
@@ -1,718 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2014 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6sx.dtsi"
-
-/ {
-	model = "Freescale i.MX6 SoloX SDB Board";
-	compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	backlight_display: backlight-display {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-		};
-	};
-
-	vcc_sd3: regulator-vcc-sd3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_vcc_sd3>;
-		regulator-name = "VCC_SD3";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_otg1>;
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_otg2>;
-		regulator-name = "usb_otg2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_psu_5v: regulator-psu-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "PSU-5V0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-3v3";
-		gpio = <&gpio3 27 0>;
-		enable-active-high;
-	};
-
-	reg_peri_3v3: regulator-peri-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_peri_3v3>;
-		regulator-name = "peri_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_enet_3v3: regulator-enet-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_enet_3v3>;
-		regulator-name = "enet_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_pcie_gpio: regulator-pcie-gpio {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcie_reg>;
-		regulator-name = "MPCIE_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_lcd_5v: regulator-lcd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_can_en: regulator-can-en {
-		compatible = "regulator-fixed";
-		regulator-name = "can-en";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_can_stby: regulator-can-stby {
-		compatible = "regulator-fixed";
-		regulator-name = "can-stby";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	sound {
-		compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hp>;
-		model = "wm8962-audio";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC";
-		mux-int-port = <2>;
-		mux-ext-port = <6>;
-		hp-det-gpio = <&gpio1 17 GPIO_ACTIVE_LOW>;
-	};
-
-	panel {
-		compatible = "sii,43wvf1g";
-		backlight = <&backlight_display>;
-		dvdd-supply = <&reg_lcd_3v3>;
-		avdd-supply = <&reg_lcd_5v>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif",
-			   "fsl,imx6sx-sdb-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-supply = <&reg_enet_3v3>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy1>;
-	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-		};
-
-		ethphy2: ethernet-phy@2 {
-			reg = <2>;
-		};
-	};
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy2>;
-	fsl,magic-packet;
-	status = "okay";
-};
-
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can_stby>;
-	status = "okay";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can_stby>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	codec: wm8962@1a {
-		compatible = "wlf,wm8962";
-		reg = <0x1a>;
-		clocks = <&clks IMX6SX_CLK_AUDIO>;
-		DCVDD-supply = <&vgen4_reg>;
-		DBVDD-supply = <&vgen4_reg>;
-		AVDD-supply = <&vgen4_reg>;
-		CPVDD-supply = <&vgen4_reg>;
-		MICVDD-supply = <&vgen3_reg>;
-		PLLVDD-supply = <&vgen4_reg>;
-		SPKVDD1-supply = <&reg_psu_5v>;
-		SPKVDD2-supply = <&reg_psu_5v>;
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie_gpio>;
-	status = "okay";
-};
-
-&lcdif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcd>;
-	status = "okay";
-
-	port {
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pwm3 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	status = "disabled";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
-	assigned-clock-rates = <24576000>;
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart5 { /* for bluetooth */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1_id>;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy1 {
-	fsl,tx-d-cal = <106>;
-};
-
-&usbphy2 {
-	fsl,tx-d-cal = <106>;
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	non-removable;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	bus-width = <8>;
-	cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&vcc_sd3>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	imx6x-sdb {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC	0x130b0
-				MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS	0x130b0
-				MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD	0x120b0
-				MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD	0x130b0
-				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
-			>;
-		};
-
-		pinctrl_enet1: enet1grp {
-			fsl,pins = <
-				MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1
-				MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1
-				MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC	0xa0b1
-				MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1
-				MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1
-				MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2	0xa0b1
-				MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3	0xa0b1
-				MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1
-				MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK	0x3081
-				MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081
-				MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081
-				MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
-				MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
-				MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
-				MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91
-				/* phy reset */
-				MX6SX_PAD_ENET2_CRS__GPIO2_IO_7		0x10b0
-			>;
-		};
-
-		pinctrl_enet_3v3: enet3v3grp {
-			fsl,pins = <
-				MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0x80000000
-			>;
-		};
-
-		pinctrl_enet2: enet2grp {
-			fsl,pins = <
-				MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC	0xa0b9
-				MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0xa0b1
-				MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0xa0b1
-				MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2	0xa0b1
-				MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3	0xa0b1
-				MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0xa0b1
-				MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK	0x3081
-				MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x3081
-				MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x3081
-				MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2	0x3081
-				MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3	0x3081
-				MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x3081
-			>;
-		};
-
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b020
-				MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b020
-			>;
-		};
-
-		pinctrl_flexcan2: flexcan2grp {
-			fsl,pins = <
-				MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b020
-				MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b020
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio_keysgrp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
-				MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
-			>;
-		};
-
-		pinctrl_hp: hpgrp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x17059
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
-				MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
-				MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c4: i2c4grp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1
-				MX6SX_PAD_CSI_DATA06__I2C4_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_lcd: lcdgrp {
-			fsl,pins = <
-				MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
-				MX6SX_PAD_LCD1_CLK__LCDIF1_CLK	0x4001b0b0
-				MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
-				MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
-				MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
-				MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
-			>;
-		};
-
-		pinctrl_mqs: mqsgrp {
-			fsl,pins = <
-				MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x120b0
-				MX6SX_PAD_SD2_CMD__MQS_LEFT  0x120b0
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0
-			>;
-		};
-
-		pinctrl_pcie_reg: pciereggrp {
-			fsl,pins = <
-				MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0x10b0
-			>;
-		};
-
-		pinctrl_peri_3v3: peri3v3grp {
-			fsl,pins = <
-				MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x80000000
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp-1 {
-			fsl,pins = <
-				MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
-			>;
-		};
-
-		pinctrl_qspi2: qspi2grp {
-			fsl,pins = <
-				MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0     0x70f1
-				MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1  0x70f1
-				MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2    0x70f1
-				MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3    0x70f1
-				MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK        0x70f1
-				MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B       0x70f1
-				MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0   0x70f1
-				MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1   0x70f1
-				MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2     0x70f1
-				MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3     0x70f1
-				MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK     0x70f1
-				MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B    0x70f1
-			>;
-		};
-
-		pinctrl_vcc_sd3: vccsd3grp {
-			fsl,pins = <
-				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
-			>;
-		};
-
-		pinctrl_sai1: sai1grp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK	0x130b0
-				MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC	0x130b0
-				MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0	0x120b0
-				MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0	0x130b0
-				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
-			>;
-		};
-
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <
-				MX6SX_PAD_SD4_DATA4__SPDIF_OUT          0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1
-				MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6SX_PAD_KEY_ROW3__UART5_DCE_RX	0x1b0b1
-				MX6SX_PAD_KEY_COL3__UART5_DCE_TX	0x1b0b1
-				MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS	0x1b0b1
-				MX6SX_PAD_KEY_COL2__UART5_DCE_RTS	0x1b0b1
-			>;
-		};
-
-		pinctrl_usb_otg1: usbotg1grp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0
-			>;
-		};
-
-		pinctrl_usb_otg1_id: usbotg1idgrp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059
-			>;
-		};
-
-		pinctrl_usb_otg2: usbot2ggrp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12	0x10b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
-				MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
-				MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
-				MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
-				MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
-				MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
-				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
-				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
-				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
-				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
-				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
-				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
-				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
-				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
-				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
-				MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
-				MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
-			fsl,pins = <
-				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
-				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
-				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
-				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
-				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
-				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
-				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
-				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
-				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
-				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
-			fsl,pins = <
-				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
-				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
-				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
-				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
-				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
-				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
-				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
-				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
-				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
-				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
-				MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
-				MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
-				MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
-				MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
-				MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
-				MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
-				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
-			>;
-		};
-
-		pinctrl_wdog: wdoggrp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
deleted file mode 100644
index 5bfad4655b22..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include "imx6ul-kontron-n6310-s.dts"
-
-/ {
-	model = "Kontron N6310 S 43";
-	compatible = "kontron,imx6ul-n6310-s-43", "kontron,imx6ul-n6310-s",
-		     "kontron,imx6ul-n6310-som", "fsl,imx6ul";
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm7 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-};
-
-&i2c4 {
-	touchscreen@5d {
-		compatible = "goodix,gt928";
-		reg = <0x5d>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cap_touch>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
-		irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
-	/* Leave status disabled because of missing display panel node */
-};
-
-&pwm7 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm7>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_cap_touch: captouchgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x1b0b0 /* Touch Interrupt */
-			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0 /* Touch Reset */
-			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x1b0b0 /* Touch Wake */
-		>;
-	};
-
-	pinctrl_lcdif_ctrl: lcdifctrlgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
-			MX6UL_PAD_LCD_RESET__LCDIF_RESET	0x79
-		>;
-	};
-
-	pinctrl_lcdif_dat: lcdifdatgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
-			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
-			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
-			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
-			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
-			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
-			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
-		>;
-	};
-
-	pinctrl_pwm7: pwm7grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_VSYNC__PWM7_OUT		0x110b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
deleted file mode 100644
index 5a3e06d6219b..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-/dts-v1/;
-
-#include "imx6ul-kontron-n6310-som.dtsi"
-#include "imx6ul-kontron-n6x1x-s.dtsi"
-
-/ {
-	model = "Kontron N6310 S";
-	compatible = "kontron,imx6ul-n6310-s", "kontron,imx6ul-n6310-som",
-		     "fsl,imx6ul";
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
deleted file mode 100644
index acd936540d89..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include "imx6ul.dtsi"
-#include "imx6ul-kontron-n6x1x-som-common.dtsi"
-
-/ {
-	model = "Kontron N6310 SOM";
-	compatible = "kontron,imx6ul-n6310-som", "fsl,imx6ul";
-
-	memory@80000000 {
-		reg = <0x80000000 0x10000000>;
-		device_type = "memory";
-	};
-};
-
-&qspi {
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spi-nand";
-		spi-max-frequency = <108000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		reg = <0>;
-
-		partition@0 {
-			label = "ubi1";
-			reg = <0x00000000 0x08000000>;
-		};
-
-		partition@8000000 {
-			label = "ubi2";
-			reg = <0x08000000 0x08000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts
deleted file mode 100644
index 239a1af3aeaa..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- */
-
-/dts-v1/;
-
-#include "imx6ul-kontron-n6311-som.dtsi"
-#include "imx6ul-kontron-n6x1x-s.dtsi"
-
-/ {
-	model = "Kontron N6311 S";
-	compatible = "kontron,imx6ul-n6311-s", "kontron,imx6ul-n6311-som",
-		     "fsl,imx6ul";
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
deleted file mode 100644
index 29ed38dce580..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- */
-
-#include "imx6ul.dtsi"
-#include "imx6ul-kontron-n6x1x-som-common.dtsi"
-
-/ {
-	model = "Kontron N6311 SOM";
-	compatible = "kontron,imx6ul-n6311-som", "fsl,imx6ul";
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-		device_type = "memory";
-	};
-};
-
-&qspi {
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spi-nand";
-		spi-max-frequency = <104000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		reg = <0>;
-
-		partition@0 {
-			label = "ubi1";
-			reg = <0x00000000 0x08000000>;
-		};
-
-		partition@8000000 {
-			label = "ubi2";
-			reg = <0x08000000 0x18000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
deleted file mode 100644
index 43868311f48a..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
+++ /dev/null
@@ -1,405 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led1 {
-			label = "debug-led1";
-			gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			label = "debug-led2";
-			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "debug-led3";
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	pwm-beeper {
-		compatible = "pwm-beeper";
-		pwms = <&pwm8 0 5000>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v: regulator-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_vref_adc: regulator-vref-adc {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-adc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&adc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc1>;
-	vref-supply = <&reg_vref_adc>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	eeprom@0 {
-		compatible = "anvo,anv32e61w", "atmel,at25";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		spi-cpha;
-		spi-cpol;
-		pagesize = <1>;
-		size = <8192>;
-		address-width = <16>;
-	};
-};
-
-&fec1 {
-	pinctrl-0 = <&pinctrl_enet1>;
-	/delete-node/ mdio;
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy2>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-			micrel,led-mode = <0>;
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			clock-names = "rmii-ref";
-		};
-
-		ethphy2: ethernet-phy@2 {
-			reg = <2>;
-			micrel,led-mode = <0>;
-			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
-			clock-names = "rmii-ref";
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-};
-
-&pwm8 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm8>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	linux,rs485-enabled-at-boot-time;
-	rs485-rx-during-tx;
-	rs485-rts-active-low;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	dr_mode = "otg";
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	over-current-active-low;
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	vbus-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3v3>;
-	voltage-ranges = <3300 3300>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	non-removable;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3v3>;
-	voltage-ranges = <3300 3300>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
-
-	pinctrl_adc1: adc1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
-			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0xb0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA07__ECSPI1_MISO	0x100b1
-			MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI	0x100b1
-			MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK	0x100b1
-			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x100b1	/* ECSPI1-CS1 */
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b009
-		>;
-	};
-
-	pinctrl_enet2_mdio: enet2mdiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp{
-		fsl,pins = <
-			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
-			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
-		>;
-	};
-
-	pinctrl_gpio: gpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0	/* DOUT1 */
-			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x1b0b0	/* DIN1 */
-			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x1b0b0	/* DOUT2 */
-			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0	/* DIN2 */
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x1b0b0	/* LED H14 */
-			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x1b0b0	/* LED H15 */
-			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0	/* LED H16 */
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
-			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL	0x4001f8b0
-			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA	0x4001f8b0
-		>;
-	};
-
-	pinctrl_pwm8: pwm8grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_HSYNC__PWM8_OUT		0x110b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_DATA04__UART2_DCE_TX	0x1b0b1
-			MX6UL_PAD_NAND_DATA05__UART2_DCE_RX	0x1b0b1
-			MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS	0x1b0b1
-			/*
-			 * mux unused RTS to make sure it doesn't cause
-			 * any interrupts when it is undefined
-			 */
-			MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
-			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b1
-			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1 {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x100b1	/* SD1_CD */
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10059
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
deleted file mode 100644
index 09a83dbdf651..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	chosen {
-		stdout-path = &uart4;
-	};
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-			micrel,led-mode = <0>;
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			clock-names = "rmii-ref";
-		};
-	};
-};
-
-&fec2 {
-	phy-mode = "rmii";
-	status = "disabled";
-};
-
-&qspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_out>;
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA03__ECSPI2_MISO      0x100b1
-			MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI      0x100b1
-			MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK      0x100b1
-			MX6UL_PAD_CSI_DATA01__GPIO4_IO22       0x100b1
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b009
-		>;
-	};
-
-	pinctrl_enet1_mdio: enet1mdiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC         0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO        0x1b0b0
-		>;
-	};
-
-	pinctrl_qspi: qspigrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK        0x70a1
-			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00   0x70a1
-			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01     0x70a1
-			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02     0x70a1
-			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03       0x70a1
-			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B        0x70a1
-		>;
-	};
-
-	pinctrl_reset_out: rstoutgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY    0x18b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts b/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts
deleted file mode 100644
index 8c2f3df79b47..000000000000
--- a/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6ul.dtsi"
-#include "imx6ul-tx6ul.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TXUL-0010 Module";
-	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
-
-	aliases {
-		/delete-property/ mmc1;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts b/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts
deleted file mode 100644
index d82698e7d50f..000000000000
--- a/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6ul.dtsi"
-#include "imx6ul-tx6ul.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TXUL-0011 Module";
-	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
-
-	aliases {
-		mmc0 = &usdhc2;
-		mmc1 = &usdhc1;
-	};
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	no-1-8-v;
-	non-removable;
-	fsl,wp-controller;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
deleted file mode 100644
index 92ac0edcb608..000000000000
--- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6ul.dtsi"
-#include "imx6ul-tx6ul.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TXUL-0010 Module on TXUL Mainboard";
-	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
-
-	aliases {
-		lcdif-24bit-pins-a = &pinctrl_disp0_3;
-		mmc0 = &usdhc1;
-		/delete-property/ mmc1;
-		serial2 = &uart3;
-		serial4 = &uart5;
-	};
-	/delete-node/ sound;
-};
-
-&can1 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&fec1 {
-	pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>;
-	/delete-node/ mdio;
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
-	phy-supply = <&reg_3v3_etn>;
-	phy-handle = <&etnphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		etnphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_etnphy0_int>;
-			interrupt-parent = <&gpio5>;
-			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-			interrupts-extended = <&gpio5 5 IRQ_TYPE_EDGE_FALLING>;
-			status = "okay";
-		};
-
-		etnphy1: ethernet-phy@2 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <2>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_etnphy1_int>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
-			interrupts-extended = <&gpio4 27 IRQ_TYPE_EDGE_FALLING>;
-			status = "okay";
-		};
-	};
-};
-
-&i2c_gpio {
-	status = "disabled";
-};
-
-&i2c2 {
-	/delete-node/ codec@a;
-	/delete-node/ touchscreen@48;
-
-	rtc: rtc@6f {
-		compatible = "microchip,mcp7940x";
-		reg = <0x6f>;
-	};
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&lcdif {
-	pinctrl-0 = <&pinctrl_disp0_3>;
-};
-
-&reg_usbotg_vbus{
-	status = "disabled";
-};
-
-&usdhc1 {
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	non-removable;
-	/delete-property/ cd-gpios;
-	cap-sdio-irq;
-};
-
-&uart1 {
-	pinctrl-0 = <&pinctrl_uart1>;
-	/delete-property/ uart-has-rtscts;
-};
-
-&uart2 {
-	pinctrl-0 = <&pinctrl_uart2>;
-	/delete-property/ uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	status = "okay";
-};
-
-&uart7 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart7>;
-	status = "okay";
-};
-
-&uart8 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart8>;
-	status = "disabled"; /* conflicts with LCDIF */
-};
-
-&iomuxc {
-	hoggrp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x0b0b0 /* WLAN_RESET */
-		>;
-	};
-
-	pinctrl_disp0_3: disp0grp-3 {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x10 /* HSYNC */
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x10 /* VSYNC */
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x10
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x10
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x10
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x10
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x10
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x10
-			/* LCD_DATA08..09 not wired */
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x10
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x10
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x10
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x10
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x10
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x10
-			/* LCD_DATA16..17 not wired */
-			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x10
-			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x10
-			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x10
-			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x10
-			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x10
-			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x10
-		>;
-	};
-
-	pinctrl_enet2_mdio: enet2-mdiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x0b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x0b0b0
-			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x0b0b0
-			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x0b0b0
-			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart7: uart7grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA16__UART7_DCE_TX	0x0b0b0
-			MX6UL_PAD_LCD_DATA17__UART7_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart8: uart8grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA20__UART8_DCE_TX	0x0b0b0
-			MX6UL_PAD_LCD_DATA21__UART8_DCE_RX	0x0b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-aster.dts
deleted file mode 100644
index d3f2fb7c6c1e..000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-aster.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017-2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-nonwifi.dtsi"
-#include "imx6ull-colibri-aster.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Aster";
-	compatible = "toradex,colibri-imx6ull-aster",
-		     "toradex,colibri-imx6ull",
-		     "fsl,imx6ull";
-};
-
-&atmel_mxt_ts {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
deleted file mode 100644
index 9bf7111d7b00..000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018-2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-nonwifi.dtsi"
-#include "imx6ull-colibri-eval-v3.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx6ull-eval", "fsl,imx6ull";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
deleted file mode 100644
index afc1e0119783..000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018-2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-nonwifi.dtsi"
-#include "imx6ull-colibri-iris-v2.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 256M/512B on Colibri Iris V2";
-	compatible = "toradex,colibri-imx6ull-iris-v2",
-		     "toradex,colibri-imx6ull",
-		     "fsl,imx6ull";
-};
-
-&atmel_mxt_ts {
-	status = "okay";
-};
-
-&gpio1 {
-	/* This turns the LVDS transceiver on */
-	lvds-power-on {
-		gpio-hog;
-		gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
-		line-name = "LVDS_POWER_ON";
-		output-high;
-	};
-};
-
-&gpio2 {
-	/*
-	 * This switches the LVDS transceiver to the single-channel
-	 * output mode.
-	 */
-	lvds-ch-mode {
-		gpio-hog;
-		gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
-		line-name = "LVDS_CH_MODE";
-		output-high;
-	};
-
-	/*
-	 * This switches the LVDS transceiver to the 24-bit RGB mode.
-	 */
-	lvds-rgb-mode {
-		gpio-hog;
-		gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
-		line-name = "LVDS_RGB_MODE";
-		output-low;
-	};
-};
-
-&gpio5 {
-	/*
-	 * This switches the LVDS transceiver to VESA color mapping mode.
-	 */
-	lvds-color-map {
-		gpio-hog;
-		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
-		line-name = "LVDS_COLOR_MAP";
-		output-low;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-iris.dts
deleted file mode 100644
index 4fb97b0fe30b..000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-iris.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018-2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-nonwifi.dtsi"
-#include "imx6ull-colibri-iris.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Iris";
-	compatible = "toradex,colibri-imx6ull-iris",
-		     "toradex,colibri-imx6ull",
-		     "fsl,imx6ull";
-};
-
-&atmel_mxt_ts {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts
deleted file mode 100644
index b4f65e8c5857..000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017-2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-wifi.dtsi"
-#include "imx6ull-colibri-aster.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 512MB on Colibri Aster";
-	compatible = "toradex,colibri-imx6ull-wifi-aster",
-		     "toradex,colibri-imx6ull",
-		     "fsl,imx6ull";
-};
-
-&atmel_mxt_ts {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
deleted file mode 100644
index 1d64d1a5d8a7..000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018-2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-wifi.dtsi"
-#include "imx6ull-colibri-eval-v3.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 512MB on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx6ull-wifi-eval", "fsl,imx6ull";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts
deleted file mode 100644
index 5ac1aa298ce7..000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018-2022 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-wifi.dtsi"
-#include "imx6ull-colibri-iris.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris";
-	compatible = "toradex,colibri-imx6ull-wifi-iris",
-		     "toradex,colibri-imx6ull",
-		     "fsl,imx6ull";
-};
-
-&atmel_mxt_ts {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts b/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts
deleted file mode 100644
index 57588a5e1e34..000000000000
--- a/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2019 Kontron Electronics GmbH
- */
-
-/dts-v1/;
-
-#include "imx6ull-kontron-n6411-som.dtsi"
-#include "imx6ul-kontron-n6x1x-s.dtsi"
-
-/ {
-	model = "Kontron N6411 S";
-	compatible = "kontron,imx6ull-n6411-s", "kontron,imx6ull-n6411-som",
-		     "fsl,imx6ull";
-};
diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
deleted file mode 100644
index d000606c0704..000000000000
--- a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- */
-
-#include "imx6ull.dtsi"
-#include "imx6ul-kontron-n6x1x-som-common.dtsi"
-
-/ {
-	model = "Kontron N6411 SOM";
-	compatible = "kontron,imx6ull-n6311-som", "fsl,imx6ull";
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-		device_type = "memory";
-	};
-};
-
-&qspi {
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spi-nand";
-		spi-max-frequency = <104000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		reg = <0>;
-
-		partition@0 {
-			label = "ubi1";
-			reg = <0x00000000 0x08000000>;
-		};
-
-		partition@8000000 {
-			label = "ubi2";
-			reg = <0x08000000 0x18000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi
deleted file mode 100644
index 3df6dff7734a..000000000000
--- a/arch/arm/boot/dts/imx7-mba7.dtsi
+++ /dev/null
@@ -1,640 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Device Tree Include file for TQ-Systems MBa7 carrier board.
- *
- * Copyright (C) 2016 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
- *
- * Note: This file does not include nodes for all peripheral devices.
- * As device driver coverage increases additional nodes can be added.
- */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/net/ti-dp83867.h>
-
-/ {
-	aliases {
-		mmc0 = &usdhc3;
-		mmc1 = &usdhc1;
-		/delete-property/ mmc2;
-	};
-
-	beeper {
-		compatible = "gpio-beeper";
-		gpios = <&pca9555 0 GPIO_ACTIVE_HIGH>;
-	};
-
-	chosen {
-		stdout-path = &uart6;
-	};
-
-	gpio_buttons: gpio-keys {
-		compatible = "gpio-keys";
-
-		button-0 {
-			/* #SWITCH_A */
-			label = "S11";
-			linux,code = <KEY_1>;
-			gpios = <&pca9555 13 GPIO_ACTIVE_LOW>;
-		};
-
-		button-1 {
-			/* #SWITCH_B */
-			label = "S12";
-			linux,code = <KEY_2>;
-			gpios = <&pca9555 14 GPIO_ACTIVE_LOW>;
-		};
-
-		button-2 {
-			/* #SWITCH_C */
-			label = "S13";
-			linux,code = <KEY_3>;
-			gpios = <&pca9555 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		led1 {
-			label = "led1";
-			gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led2 {
-			label = "led2";
-			gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_sd1_vmmc: regulator-sd1-vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3V3_SD1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_fec1_pwdn: regulator-fec1-pwdn {
-		compatible = "regulator-fixed";
-		regulator-name = "PWDN_FEC1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_fec2_pwdn: regulator-fec2-pwdn {
-		compatible = "regulator-fixed";
-		regulator-name = "PWDN_FEC2";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "VBUS_USBOTG1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "VBUS_USBOTG2";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_mpcie_1v5: regulator-mpcie-1v5 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC1V5_MPCIE";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&pca9555 12 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_mpcie_3v3: regulator-mpcie-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3V3_MPCIE";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pca9555 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_mba_12v0: regulator-mba-12v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC12V0_MBA7";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		gpio = <&pca9555 11 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_lvds_transmitter: regulator-lvds-transmitter {
-		compatible = "regulator-fixed";
-		regulator-name = "#SHTDN_LVDS";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pca9555 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_vref_1v8: regulator-vref-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC1V8_REF";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		vin-supply = <&sw2_reg>;
-	};
-
-	reg_audio_3v3: regulator-audio-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3V3_AUDIO";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "imx-audio-tlv320aic32x4";
-		ssi-controller = <&sai1>;
-		audio-codec = <&tlv320aic32x4>;
-		audio-routing =
-			"IN3_L", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"IN1_L", "Line In Jack",
-			"IN1_R", "Line In Jack",
-			"Line Out Jack", "LOL",
-			"Line Out Jack", "LOR";
-	};
-};
-
-&adc1 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&adc2 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>, <&gpio4 1 GPIO_ACTIVE_LOW>,
-		   <&gpio4 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	phy-supply = <&reg_fec1_pwdn>;
-	phy-handle = <&ethphy1_0>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1_0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
-			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
-			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
-		};
-	};
-};
-
-&flash0 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uboot@0 {
-			label = "U-Boot";
-			reg = <0x0 0xd0000>;
-		};
-
-		env1@d0000 {
-			label = "ENV1";
-			reg = <0xd0000 0x10000>;
-		};
-
-		env2@e0000 {
-			label = "ENV2";
-			reg = <0xe0000 0x10000>;
-		};
-
-		dtb@f0000 {
-			label = "DTB";
-			reg = <0xf0000 0x10000>;
-		};
-
-		linux@100000 {
-			label = "Linux";
-			reg = <0x100000 0x700000>;
-		};
-
-		rootfs@800000 {
-			label = "RootFS";
-			reg = <0x800000 0x3800000>;
-		};
-	};
-};
-
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&i2c1 {
-	lm75: temperature-sensor@49 {
-		compatible = "national,lm75";
-		reg = <0x49>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	tlv320aic32x4: audio-codec@18 {
-		compatible = "ti,tlv320aic32x4";
-		reg = <0x18>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
-		clock-names = "mclk";
-		ldoin-supply = <&reg_audio_3v3>;
-		iov-supply = <&reg_audio_3v3>;
-	};
-
-	pca9555: gpio-expander@20 {
-		compatible = "nxp,pca9555";
-		reg = <0x20>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pca9555>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_mba7_1>;
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO		0x7c
-			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI		0x74
-			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK		0x74
-			MX7D_PAD_UART1_RX_DATA__GPIO4_IO0		0x74
-			MX7D_PAD_UART1_TX_DATA__GPIO4_IO1		0x74
-			MX7D_PAD_UART2_RX_DATA__GPIO4_IO2		0x74
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO		0x7c
-			MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI		0x74
-			MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK		0x74
-			MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0			0x74
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x02
-			MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x00
-			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x71
-			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x71
-			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x71
-			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x71
-			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x71
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71
-			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x79
-			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x79
-			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x79
-			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x79
-			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x79
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x79
-			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
-			MX7D_PAD_ENET1_COL__GPIO7_IO15		0x40000070
-			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
-			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x40000078
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x5a
-			MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x52
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x5a
-			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x52
-		>;
-	};
-
-	pinctrl_hog_mba7_1: hogmba71grp {
-		fsl,pins = <
-			/* Limitation: WDOG2_B / WDOG2_RESET not usable */
-			MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13	0x4000007c
-			MX7D_PAD_ENET1_CRS__GPIO7_IO14		0x40000074
-			/* #BOOT_EN */
-			MX7D_PAD_UART2_TX_DATA__GPIO4_IO3	0x40000010
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x40000078
-			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x40000078
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x40000078
-			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x40000078
-		>;
-	};
-
-	pinctrl_pca9555: pca95550grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x78
-		>;
-	};
-
-	pinctrl_sai1: sai1grp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_MCLK__SAI1_MCLK		0x11
-			MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK	0x1c
-			MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1c
-			MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC	0x1c
-
-			MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1c
-			MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x14
-			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x14
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x7e
-			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x76
-			MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x76
-			MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x7e
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX	0x7e
-			MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX	0x76
-			MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS	0x76
-			MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS	0x7e
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX7D_PAD_I2C4_SCL__UART5_DCE_RX		0x7e
-			MX7D_PAD_I2C4_SDA__UART5_DCE_TX		0x76
-		>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA08__UART6_DCE_RX	0x7d
-			MX7D_PAD_EPDC_DATA09__UART6_DCE_TX	0x75
-			MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS	0x75
-			MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS	0x7d
-		>;
-	};
-
-	pinctrl_uart7: uart7grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA12__UART7_DCE_RX	0x7e
-			MX7D_PAD_EPDC_DATA13__UART7_DCE_TX	0x76
-			MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS	0x76
-			/* Limitation: RTS is not connected */
-			MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS	0x7e
-		>;
-	};
-
-	pinctrl_usdhc1_gpio: usdhc1grp_gpio {
-		fsl,pins = <
-			/* WP */
-			MX7D_PAD_SD1_WP__GPIO5_IO1		0x7c
-			/* CD */
-			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x7c
-			/* VSELECT */
-			MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5e
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5e
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5e
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5e
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5e
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			/* LCD_CONTRAST */
-			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT	0x50
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x5c
-			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x59
-		>;
-	};
-
-	pinctrl_wdog1: wdog1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30
-		>;
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
-			  <&clks IMX7D_SAI1_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-	assigned-clock-rates = <0>, <36864000>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart7 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart7>;
-	assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	uart-has-rtscts;
-	linux,rs485-enabled-at-boot-time;
-	rs485-rts-active-low;
-	rs485-rx-during-tx;
-	status = "okay";
-};
-
-&usbh {
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	over-current-active-low;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_sd1_vmmc>;
-	bus-width = <4>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog1>;
-	fsl,ext-reset-output;
-};
diff --git a/arch/arm/boot/dts/imx7-tqma7.dtsi b/arch/arm/boot/dts/imx7-tqma7.dtsi
deleted file mode 100644
index fe42b0a46831..000000000000
--- a/arch/arm/boot/dts/imx7-tqma7.dtsi
+++ /dev/null
@@ -1,292 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Device Tree Include file for TQ-Systems TQMa7x boards with full mounted PCB.
- *
- * Copyright (C) 2016 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
- */
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		/* 512 MB - default configuration */
-		reg = <0x80000000 0x20000000>;
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&sw1a_reg>;
-};
-
-&gpio2 {
-	/* Configured as pullup by QSPI pin group */
-	qspi-reset-hog {
-		gpio-hog;
-		gpios = <4 GPIO_ACTIVE_LOW>;
-		input;
-		line-name = "qspi-reset";
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	pfuze3000: pmic@8 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic1>;
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			/* use sw1c_reg to align with pfuze100/pfuze200 */
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	se97b: temperature-sensor-eeprom@1e {
-		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
-		reg = <0x1e>;
-		status = "okay";
-	};
-
-	/* ST M24C64 */
-	m24c64: eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-		status = "okay";
-	};
-
-	at24c02: eeprom@56 {
-		compatible = "atmel,24c02";
-		reg = <0x56>;
-		pagesize = <16>;
-		status = "okay";
-	};
-
-	ds1339: rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX7D_PAD_I2C1_SDA__I2C1_SDA	0x40000078
-			MX7D_PAD_I2C1_SCL__I2C1_SCL	0x40000078
-		>;
-	};
-
-	pinctrl_pmic1: pmic1grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x4000005C
-		>;
-	};
-
-	pinctrl_qspi: qspigrp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0	0x5A
-			MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1	0x5A
-			MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2	0x5A
-			MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3	0x5A
-			MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK	0x11
-			MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B	0x54
-			MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B	0x54
-		>;
-	};
-
-	pinctrl_qspi_reset: qspi_resetgrp {
-		fsl,pins = <
-			/* #QSPI_RESET */
-			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x52
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x56
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD               0x5a
-			MX7D_PAD_SD3_CLK__SD3_CLK               0x51
-			MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5a
-			MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5a
-			MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5a
-			MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5a
-			MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5a
-			MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5a
-			MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5a
-			MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5a
-			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1a
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD               0x5b
-			MX7D_PAD_SD3_CLK__SD3_CLK               0x51
-			MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5b
-			MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5b
-			MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5b
-			MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5b
-			MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5b
-			MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5b
-			MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5b
-			MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5b
-			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1b
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl_wdog1: wdog1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30
-		>;
-	};
-};
-
-&qspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi &pinctrl_qspi_reset>;
-	status = "okay";
-
-	flash0: flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <29000000>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
-	};
-};
-
-&sdma {
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-	assigned-clock-rates = <400000000>;
-	bus-width = <8>;
-	non-removable;
-	vmmc-supply = <&vgen4_reg>;
-	vqmmc-supply = <&sw2_reg>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog1>;
-	/*
-	 * Errata e10574:
-	 * WDOG reset needs to run with WDOG_RESET_B signal enabled.
-	 * X1-51 (WDOG1#) signal needs carrier board handling to reset
-	 * TQMa7 on X1-22 (RESET_IN#).
-	 */
-	fsl,ext-reset-output;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts
deleted file mode 100644
index 32bf9fa9d00e..000000000000
--- a/arch/arm/boot/dts/imx7d-mba7.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Device Tree Source for TQ-Systems TQMa7D board on MBa7 carrier board.
- *
- * Copyright (C) 2016 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
- */
-
-/dts-v1/;
-
-#include "imx7d-tqma7.dtsi"
-#include "imx7-mba7.dtsi"
-
-/ {
-	model = "TQ-Systems TQMa7D board on MBa7 carrier board";
-	compatible = "tq,imx7d-mba7", "tq,imx7d-tqma7", "fsl,imx7d";
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	phy-supply = <&reg_fec2_pwdn>;
-	phy-handle = <&ethphy2_0>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy2_0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
-			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
-			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_mba7_1>;
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_CD_B__ENET2_MDIO			0x02
-			MX7D_PAD_SD2_WP__ENET2_MDC			0x00
-			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x71
-			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x71
-			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x71
-			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x71
-			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x71
-			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x71
-			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x79
-			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x79
-			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x79
-			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x79
-			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x79
-			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x79
-			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
-			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x40000070
-			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
-			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x40000078
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			/* #pcie_wake */
-			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30		0x70
-			/* #pcie_rst */
-			MX7D_PAD_SD2_CLK__GPIO5_IO12			0x70
-			/* #pcie_dis */
-			MX7D_PAD_EPDC_BDR1__GPIO2_IO29			0x70
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl_usbotg2: usbotg2grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC	0x5c
-			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59
-		>;
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	/* 1.5V logically from 3.3V */
-	/* probe deferral not supported */
-	/* pcie-bus-supply = <&reg_mpcie_1v5>; */
-	reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usbotg2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg2>;
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	dr_mode = "host";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
deleted file mode 100644
index a2a91bfdd98e..000000000000
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ /dev/null
@@ -1,296 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
- *
- */
-
-/dts-v1/;
-
-#include "imx7d.dtsi"
-
-/ {
-	model = "reMarkable 2.0";
-	compatible = "remarkable,imx7d-remarkable2", "fsl,imx7d";
-
-	chosen {
-		stdout-path = &uart6;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	reg_brcm: regulator-brcm {
-		compatible = "regulator-fixed";
-		regulator-name = "brcm_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_brcm_reg>;
-		gpio = <&gpio6 13 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		startup-delay-us = <150>;
-	};
-
-	reg_digitizer: regulator-digitizer {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_3V3_DIGITIZER";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&pinctrl_digitizer_reg>;
-		pinctrl-1 = <&pinctrl_digitizer_reg>;
-		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		startup-delay-us = <100000>; /* 100 ms */
-	};
-
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi>;
-		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
-		clock-names = "ext_clock";
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
-			  <&clks IMX7D_CLKO2_ROOT_DIV>;
-	assigned-clock-parents = <&clks IMX7D_CKIL>;
-	assigned-clock-rates = <0>, <32768>;
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	wacom_digitizer: digitizer@9 {
-		compatible = "hid-over-i2c";
-		reg = <0x09>;
-		hid-descr-addr = <0x01>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wacom>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-		touchscreen-inverted-x;
-		touchscreen-inverted-y;
-		vdd-supply = <&reg_digitizer>;
-	};
-};
-
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&usbotg2 {
-	srp-disable;
-	hnp-disable;
-	status = "okay";
-};
-
-&usdhc2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	vmmc-supply = <&reg_brcm>;
-	bus-width = <4>;
-	non-removable;
-	keep-power-in-suspend;
-	cap-power-off-card;
-	status = "okay";
-
-	brcmf: bcrmf@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc3>;
-	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-	assigned-clock-rates = <400000000>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc_lpsr {
-	pinctrl_digitizer_reg: digitizerreggrp {
-		fsl,pins = <
-			/* DIGITIZER_PWR_EN */
-			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14
-		>;
-	};
-
-	pinctrl_wacom: wacomgrp {
-		fsl,pins = <
-			/*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x00000014 FWE */
-			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x00000074 /* PDCTB */
-			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x00000034 /* WACOM INT */
-			/*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x00000014 WACOM PWR ENABLE */
-			/*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x00000074 WACOM RESET */
-		>;
-	};
-};
-
-&iomuxc {
-	pinctrl_brcm_reg: brcmreggrp {
-		fsl,pins = <
-			/* WIFI_PWR_EN */
-			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
-			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
-		>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA09__UART6_DCE_TX		0x79
-			MX7D_PAD_EPDC_DATA08__UART6_DCE_RX		0x79
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
-			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
-			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
-			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
-			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
-			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
-			MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
-			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
-			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
-			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
-			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
-			MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
-			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
-			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
-			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
-			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
-			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
-			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY	0x74
-		>;
-	};
-
-	pinctrl_wifi: wifigrp {
-		fsl,pins = <
-			/* WiFi Reg On */
-			MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x00000014
-			/* WiFi Sleep 32k */
-			MX7D_PAD_SD1_WP__CCM_CLKO2		0x00000014
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-sdb-reva.dts b/arch/arm/boot/dts/imx7d-sdb-reva.dts
deleted file mode 100644
index cabdaa6dc518..000000000000
--- a/arch/arm/boot/dts/imx7d-sdb-reva.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright (C) 2015 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include "imx7d-sdb.dts"
-
-/ {
-	model = "Freescale i.MX7 SabreSD RevA Board";
-	compatible = "fsl,imx7d-sdb-reva", "fsl,imx7d";
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>;
-		gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&fec2 {
-	/delete-property/phy-supply;
-};
-
-&iomuxc {
-	imx7d-sdb {
-		pinctrl_tsc2046_pendown: tsc2046_pendown {
-			fsl,pins = <
-				MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x59
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
-			>;
-		};
-
-		pinctrl_usb_otg2_vbus_reg_reva: usbotg2vbusregrevagrp {
-			fsl,pins = <
-				MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
deleted file mode 100644
index 78f4224a9bf4..000000000000
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ /dev/null
@@ -1,867 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright (C) 2015 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include "imx7d.dtsi"
-
-/ {
-	model = "Freescale i.MX7 SabreSD Board";
-	compatible = "fsl,imx7d-sdb", "fsl,imx7d";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-		};
-	};
-
-	spi4 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_spi4>;
-		gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		extended_io: gpio-expander@0 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-			registers-number = <1>;
-			spi-max-frequency = <100000>;
-		};
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg2_vbus";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg>;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_vref_1v8: regulator-vref-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	reg_brcm: regulator-brcm {
-		compatible = "regulator-fixed";
-		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-name = "brcm_reg";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_brcm_reg>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <200000>;
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&extended_io 7 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_can2_3v3: regulator-can2-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "can2-3v3";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flexcan2_reg>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_fec2_3v3: regulator-fec2-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fec2-3v3";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_enet2_reg>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000 0>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-	panel {
-		compatible = "innolux,at043tn24";
-		backlight = <&backlight>;
-		power-supply = <&reg_lcd_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx7d-evk-wm8960",
-			     "fsl,imx-audio-wm8960";
-		model = "wm8960-audio";
-		audio-cpu = <&sai1>;
-		audio-codec = <&codec>;
-		hp-det-gpio = <&gpio2 28 GPIO_ACTIVE_HIGH>;
-		audio-routing =
-			"Headphone Jack", "HP_L",
-			"Headphone Jack", "HP_R",
-			"Ext Spk", "SPK_LP",
-			"Ext Spk", "SPK_LN",
-			"Ext Spk", "SPK_RP",
-			"Ext Spk", "SPK_RN",
-			"LINPUT1", "AMIC",
-			"AMIC", "MICB";
-	};
-
-	sound-hdmi {
-		compatible = "fsl,imx-audio-sii902x";
-		model = "sii902x-audio";
-		audio-cpu = <&sai3>;
-		hdmi-out;
-	};
-};
-
-&adc1 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&adc2 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&cpu0 {
-	cpu-supply = <&sw1a_reg>;
-};
-
-&cpu1 {
-	cpu-supply = <&sw1a_reg>;
-};
-
-&ecspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	tsc2046@0 {
-		compatible = "ti,tsc2046";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <29 0>;
-		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-		ti,x-min = /bits/ 16 <0>;
-		ti,x-max = /bits/ 16 <0>;
-		ti,y-min = /bits/ 16 <0>;
-		ti,y-max = /bits/ 16 <0>;
-		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plate-ohms = /bits/ 16 <400>;
-		wakeup-source;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy0>;
-	fsl,magic-packet;
-	phy-reset-gpios = <&extended_io 5 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-		};
-	};
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy1>;
-	phy-supply = <&reg_fec2_3v3>;
-	fsl,magic-packet;
-	status = "okay";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can2_3v3>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: pfuze3000@8 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			/* use sw1c_reg to align with pfuze100/pfuze200 */
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	mpl3115@60 {
-		compatible = "fsl,mpl3115";
-		reg = <0x60>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	codec: wm8960@1a {
-		compatible = "wlf,wm8960";
-		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
-		clock-names = "mclk";
-		wlf,shared-lrclk;
-		wlf,hp-cfg = <2 2 3>;
-		wlf,gpio-cfg = <1 3>;
-		assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
-				  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
-				  <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
-		assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-		assigned-clock-rates = <0>, <884736000>, <12288000>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif>;
-	status = "okay";
-
-	port {
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pcie {
-	reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&reg_1p0d {
-	vin-supply = <&sw2_reg>;
-};
-
-&reg_1p2 {
-	vin-supply = <&sw2_reg>;
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
-			  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
-			  <&clks IMX7D_SAI1_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-	assigned-clock-rates = <0>, <884736000>, <36864000>;
-	status = "okay";
-};
-
-&sai3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai3 &pinctrl_sai3_mclk>;
-	assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>,
-			  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
-			  <&clks IMX7D_SAI3_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-	assigned-clock-rates = <0>, <884736000>, <36864000>;
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-	wakeup-source;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	wakeup-source;
-	keep-power-in-suspend;
-	non-removable;
-	vmmc-supply = <&reg_brcm>;
-	fsl,tuning-step = <2>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-	assigned-clock-rates = <400000000>;
-	bus-width = <8>;
-	fsl,tuning-step = <2>;
-	non-removable;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx7d-sdb {
-		pinctrl_brcm_reg: brcmreggrp {
-			fsl,pins = <
-				MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x14
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO	0x2
-				MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI	0x2
-				MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK	0x2
-				MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x59
-			>;
-		};
-
-		pinctrl_enet1: enet1grp {
-			fsl,pins = <
-				MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
-				MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
-				MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
-				MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
-				MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
-				MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
-				MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
-				MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
-				MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
-				MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
-				MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
-				MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
-				MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
-				MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
-			>;
-		};
-
-		pinctrl_enet2: enet2grp {
-			fsl,pins = <
-				MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x1
-				MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x1
-				MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x1
-				MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x1
-				MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x1
-				MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x1
-				MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x1
-				MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x1
-				MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x1
-				MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x1
-				MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x1
-				MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x1
-			>;
-		};
-
-		pinctrl_enet2_reg: enet2reggrp {
-			fsl,pins = <
-				MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x14
-			>;
-		};
-
-		pinctrl_flexcan2: flexcan2grp {
-			fsl,pins = <
-				MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x59
-				MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x59
-			>;
-		};
-
-		pinctrl_flexcan2_reg: flexcan2reggrp {
-			fsl,pins = <
-				MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x59	/* CAN_STBY */
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio_keysgrp {
-			fsl,pins = <
-				MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x59
-				MX7D_PAD_SD2_WP__GPIO5_IO10		0x59
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
-				MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x59  /* headphone detect */
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
-				MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
-				MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
-				MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
-			>;
-		};
-
-		pinctrl_i2c4: i2c4grp {
-			fsl,pins = <
-				MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
-				MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
-			>;
-		};
-
-		pinctrl_lcdif: lcdifgrp {
-			fsl,pins = <
-				MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
-				MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
-				MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
-				MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
-				MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
-				MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
-				MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
-				MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
-				MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
-				MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
-				MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
-				MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
-				MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
-				MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
-				MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
-				MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
-				MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
-				MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
-				MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
-				MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
-				MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
-				MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
-				MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
-				MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
-				MX7D_PAD_LCD_CLK__LCD_CLK		0x79
-				MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
-				MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
-				MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
-				MX7D_PAD_LCD_RESET__LCD_RESET		0x79
-			>;
-		};
-
-		pinctrl_sai1: sai1grp {
-			fsl,pins = <
-				MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
-				MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
-				MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC	0x1f
-				MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
-				MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
-			>;
-		};
-
-		pinctrl_sai2: sai2grp {
-			fsl,pins = <
-				MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK     0x1f
-				MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC     0x1f
-				MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0    0x30
-				MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0    0x1f
-			>;
-		};
-
-		pinctrl_sai3: sai3grp {
-			fsl,pins = <
-				MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK   0x1f
-				MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC     0x1f
-				MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0    0x30
-			>;
-		};
-
-		pinctrl_spi4: spi4grp {
-			fsl,pins = <
-				MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x59
-				MX7D_PAD_GPIO1_IO12__GPIO1_IO12	0x59
-				MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x59
-			>;
-		};
-
-		pinctrl_tsc2046_pendown: tsc2046_pendown {
-			fsl,pins = <
-				MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x59
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-				MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX	0x79
-				MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX	0x79
-				MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS	0x79
-				MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS	0x79
-			>;
-		};
-
-		pinctrl_uart6: uart6grp {
-			fsl,pins = <
-				MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX	0x79
-				MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX	0x79
-				MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS	0x79
-				MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS	0x79
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX7D_PAD_SD1_CMD__SD1_CMD		0x59
-				MX7D_PAD_SD1_CLK__SD1_CLK		0x19
-				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
-				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
-				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
-				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
-				MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
-				MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
-				MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59 /* vmmc */
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX7D_PAD_SD2_CMD__SD2_CMD		0x59
-				MX7D_PAD_SD2_CLK__SD2_CLK		0x19
-				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
-				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
-				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
-				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
-			>;
-		};
-
-		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
-			fsl,pins = <
-				MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
-				MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
-				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
-				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
-				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
-				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
-			>;
-		};
-
-		pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
-			fsl,pins = <
-				MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
-				MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
-				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
-				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
-				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
-				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
-			>;
-		};
-
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-				MX7D_PAD_SD3_CLK__SD3_CLK		0x19
-				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-			fsl,pins = <
-				MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
-				MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
-				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
-				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
-				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
-				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
-				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
-				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
-				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
-				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
-				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-			fsl,pins = <
-				MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
-				MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
-				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
-				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
-				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
-				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
-				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
-				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
-				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
-				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
-				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
-			>;
-		};
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&iomuxc_lpsr {
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B		0x74
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT		0x30
-		>;
-	};
-
-	pinctrl_usb_otg2_vbus_reg: usbotg2vbusreggrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	  0x14
-		>;
-	};
-
-	pinctrl_sai3_mclk: sai3grp_mclk {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK	0x1f
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts
deleted file mode 100644
index 5e7e31b74b04..000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for the Linksys WRV54G router
- * Also known as Gemtek GTWX5715
- * Based on a board file by George T. Joseph and other patches.
- * This machine is based on IXP425.
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Linksys WRV54G / Gemtek GTWX5715";
-	compatible = "linksys,wrv54g", "gemtek,gtwx5715", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 32 MB memory */
-		device_type = "memory";
-		reg = <0x00000000 0x2000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = "uart1:115200n8";
-	};
-
-	aliases {
-		/* UART2 is the primary console */
-		serial0 = &uart1;
-		serial1 = &uart0;
-	};
-
-	/* There is an unpopulated LED slot (3) connected to GPIO 8 */
-	leds {
-		compatible = "gpio-leds";
-		led-power {
-			label = "wrv54g:yellow:power";
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-		led-wireless {
-			label = "wrv54g:yellow:wireless";
-			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		led-internet {
-			label = "wrv54g:yellow:internet";
-			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		led-dmz {
-			label = "wrv54g:green:dmz";
-			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-	};
-
-	/* This set-up comes from an OpenWrt patch */
-	spi {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sck-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-		miso-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		mosi-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-		num-chipselects = <1>;
-
-		switch@0 {
-			compatible = "micrel,ks8995";
-			reg = <0>;
-			spi-max-frequency = <50000000>;
-		};
-	};
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/* Enable writes on the expansion bus */
-				intel,ixp4xx-eb-write-enable = <1>;
-				/* 8 MB of Flash mapped in at CS0 */
-				reg = <0 0x00000000 0x00800000>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					/*
-					 * Partition info from a boot log
-					 * CHECKME: not using redboot? FIS index 0x3f @7e00000?
-					 */
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "boot";
-						reg = <0x0 0x140000>;
-						read-only;
-					};
-					partition@140000 {
-						label = "linux";
-						reg = <0x140000 0x100000>;
-						read-only;
-					};
-					partition@240000 {
-						label = "root";
-						reg = <0x240000 0x480000>;
-						read-write;
-					};
-				};
-			};
-		};
-
-		pci@c0000000 {
-			status = "ok";
-
-			/*
-			 * We have up to 2 slots (IDSEL) with 2 swizzled IRQs.
-			 * Derived from the GTWX5715 PCI boardfile.
-			 */
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-			/* IDSEL 0 */
-			<0x0000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 0 is irq 10 */
-			<0x0000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 0 is irq 11 */
-			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
-			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 1 is irq 10 */
-		};
-
-		/*
-		 * EthB - connected to the KS8995 switch ports 1-4
-		 * FIXME: the boardfile defines .phy_mask = 0x1e for this port to enable output to
-		 * all four switch ports, also using an out of tree multiphy patch.
-		 * Do we need a new binding and property for this?
-		 */
-		ethernet@c8009000 {
-			status = "ok";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy4>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/* Should be ports 1-4 on the KS8995 switch */
-				phy4: ethernet-phy@4 {
-					reg = <4>;
-				};
-
-				/* Should be port 5 on the KS8995 switch */
-				phy5: ethernet-phy@5 {
-					reg = <5>;
-				};
-			};
-		};
-
-		/* EthC - connected to KS8995 switch port 5 */
-		ethernet@c800a000 {
-			status = "ok";
-			queue-rx = <&qmgr 4>;
-			queue-txready = <&qmgr 21>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy5>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
deleted file mode 100644
index df2ca6d95ee5..000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for Netgear WG302v2 based on IXP422BB
- * Derived from boardfiles written by Imre Kaloz
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Netgear WG302 v1";
-	compatible = "netgear,wg302v1", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 32 MB SDRAM according to boot arguments */
-		device_type = "memory";
-		reg = <0x00000000 0x02000000>;
-	};
-
-	chosen {
-		/* The RedBoot comes up in 9600 baud so let's keep this */
-		bootargs = "console=ttyS0,9600n8";
-		stdout-path = "uart1:9600n8";
-	};
-
-	aliases {
-		/* These are switched around */
-		serial0 = &uart1;
-	};
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/*
-				 * 8 MB of Flash in 64 0x20000 sized blocks
-				 * mapped in at CS0.
-				 */
-				reg = <0 0x00000000 0x800000>;
-
-				/* Configure expansion bus to allow writes */
-				intel,ixp4xx-eb-write-enable = <1>;
-
-				partitions {
-					compatible = "redboot-fis";
-					fis-index-block = <0x3f>;
-				};
-			};
-		};
-
-		pci@c0000000 {
-			status = "ok";
-
-			/*
-			 * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c)
-			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
-			 * each handling all IRQs.
-			 */
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 8 */
-			<0x0800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 8 */
-			<0x0800 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 8 */
-			<0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
-			/* IDSEL 2 */
-			<0x1000 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 9 */
-			<0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
-			<0x1000 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 9 */
-			<0x1000 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 9 */
-		};
-
-		ethernet@c8009000 {
-			status = "ok";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy30>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy30: ethernet-phy@30 {
-					reg = <30>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel/Makefile b/arch/arm/boot/dts/intel/Makefile
new file mode 100644
index 000000000000..c5fc845deb61
--- /dev/null
+++ b/arch/arm/boot/dts/intel/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+subdir-y += axm
+subdir-y += ixp
+subdir-y += pxa
+subdir-y += socfpga
diff --git a/arch/arm/boot/dts/intel/axm/Makefile b/arch/arm/boot/dts/intel/axm/Makefile
new file mode 100644
index 000000000000..7c7dc679964d
--- /dev/null
+++ b/arch/arm/boot/dts/intel/axm/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_AXXIA) += \
+	axm5516-amarillo.dtb
+dtb-$(CONFIG_ARCH_AXXIA) += \
+	axm5516-amarillo.dtb
diff --git a/arch/arm/boot/dts/axm5516-amarillo.dts b/arch/arm/boot/dts/intel/axm/axm5516-amarillo.dts
index 2e2ad3c7ee77..2e2ad3c7ee77 100644
--- a/arch/arm/boot/dts/axm5516-amarillo.dts
+++ b/arch/arm/boot/dts/intel/axm/axm5516-amarillo.dts
diff --git a/arch/arm/boot/dts/axm5516-cpus.dtsi b/arch/arm/boot/dts/intel/axm/axm5516-cpus.dtsi
index f13ef80b6637..f13ef80b6637 100644
--- a/arch/arm/boot/dts/axm5516-cpus.dtsi
+++ b/arch/arm/boot/dts/intel/axm/axm5516-cpus.dtsi
diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/intel/axm/axm55xx.dtsi
index 7676a65059a4..5277890cfad2 100644
--- a/arch/arm/boot/dts/axm55xx.dtsi
+++ b/arch/arm/boot/dts/intel/axm/axm55xx.dtsi
@@ -108,7 +108,7 @@
 			#size-cells = <2>;
 			ranges;
 
-			serial0: uart@2010080000 {
+			serial0: serial@2010080000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10080000 0 0x1000>;
 				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
@@ -117,7 +117,7 @@
 				status = "disabled";
 			};
 
-			serial1: uart@2010081000 {
+			serial1: serial@2010081000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10081000 0 0x1000>;
 				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
@@ -126,7 +126,7 @@
 				status = "disabled";
 			};
 
-			serial2: uart@2010082000 {
+			serial2: serial@2010082000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10082000 0 0x1000>;
 				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
@@ -135,7 +135,7 @@
 				status = "disabled";
 			};
 
-			serial3: uart@2010083000 {
+			serial3: serial@2010083000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10083000 0 0x1000>;
 				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/intel/ixp/Makefile b/arch/arm/boot/dts/intel/ixp/Makefile
new file mode 100644
index 000000000000..cb30d8d55016
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/Makefile
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_IXP4XX) += \
+	intel-ixp42x-actiontec-mi424wr-ac.dtb \
+	intel-ixp42x-actiontec-mi424wr-d.dtb \
+	intel-ixp42x-linksys-nslu2.dtb \
+	intel-ixp42x-linksys-wrv54g.dtb \
+	intel-ixp42x-freecom-fsg-3.dtb \
+	intel-ixp42x-welltech-epbx100.dtb \
+	intel-ixp42x-ixdp425.dtb \
+	intel-ixp43x-kixrp435.dtb \
+	intel-ixp46x-ixdp465.dtb \
+	intel-ixp42x-adi-coyote.dtb \
+	intel-ixp42x-ixdpg425.dtb \
+	intel-ixp42x-goramo-multilink.dtb \
+	intel-ixp42x-iomega-nas100d.dtb \
+	intel-ixp42x-dlink-dsm-g600.dtb \
+	intel-ixp42x-gateworks-gw2348.dtb \
+	intel-ixp43x-gateworks-gw2358.dtb \
+	intel-ixp42x-netgear-wg302v1.dtb \
+	intel-ixp42x-arcom-vulcan.dtb \
+	intel-ixp42x-gateway-7001.dtb \
+	intel-ixp42x-usrobotics-usr8200.dtb
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts
new file mode 100644
index 000000000000..413b9255f9e3
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR revision A and C
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x-actiontec-mi424wr.dtsi"
+
+/ {
+	model = "Actiontec MI424WR rev A/C";
+	compatible = "actiontec,mi424wr-ac", "intel,ixp42x";
+
+	soc {
+		/* EthB used for WAN */
+		ethernet@c8009000 {
+			phy-handle = <&phy17>; // 17 on revision A-C
+
+			mdio {
+				phy17: ethernet-phy@17 {
+					/* WAN */
+					reg = <17>;
+				};
+			};
+		};
+
+		/* EthC used for LAN */
+		ethernet@c800a000 {
+			/* Fixed link to the CPU MII port on the KS8995 */
+			fixed-link {
+				speed = <100>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts
new file mode 100644
index 000000000000..3619c6411a5c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR revision D
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x-actiontec-mi424wr.dtsi"
+
+/ {
+	model = "Actiontec MI424WR rev D";
+	compatible = "actiontec,mi424wr-d", "intel,ixp42x";
+
+	soc {
+		/* EthB used for LAN */
+		ethernet@c8009000 {
+			/* Fixed link to the CPU MII port on the KS8995 */
+			fixed-link {
+				speed = <100>;
+				full-duplex;
+			};
+
+			mdio {
+				/* PHY ID 0x00221450 */
+				phy5: ethernet-phy@5 {
+					/* WAN */
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC used for WAN */
+		ethernet@c800a000 {
+			phy-handle = <&phy5>; // 5 on revision D
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
new file mode 100644
index 000000000000..76fd97c5beb6
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wan-coax {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "wan-coax";
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-power-alarm {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_ALARM;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-power {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-wireless {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-internet-down {
+			color = <LED_COLOR_ID_RED>;
+			function = "internet-down";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-internet-up {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "internet-up";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-lan-coax {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "lan-coax";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-wan-ethernet-alarm {
+			color = <LED_COLOR_ID_RED>;
+			function = "wan-ethernet-alarm";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		/* The last three LEDs are not mounted but traces exist on the PCB */
+		led-phone-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "phone-1";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-phone-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "phone-2";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-voip {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "voip";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		ethernet-switch@0 {
+			compatible = "micrel,ks8995";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-port@0 {
+					reg = <0>;
+					label = "lan1";
+					phy-mode = "mii";
+					phy-handle = <&phy1>;
+				};
+				ethernet-port@1 {
+					reg = <1>;
+					label = "lan2";
+					phy-mode = "mii";
+					phy-handle = <&phy2>;
+				};
+				ethernet-port@2 {
+					reg = <2>;
+					label = "lan3";
+					phy-mode = "mii";
+					phy-handle = <&phy3>;
+				};
+				ethernet-port@3 {
+					reg = <3>;
+					label = "lan4";
+					phy-mode = "mii";
+					phy-handle = <&phy4>;
+				};
+				ethernet-port@4 {
+					reg = <4>;
+					ethernet = <&ethc>;
+					phy-mode = "mii";
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+			};
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of Flash in 64 0x20000 sized blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x0800000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					fis-index-block = <0x3f>;
+				};
+			};
+			gpio1: gpio@1,0 {
+				/* MMIO GPIO at CS1 */
+				compatible = "intel,ixp4xx-expansion-bus-mmio-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+				big-endian;
+				reg = <1 0x00000000 0x2>;
+				reg-names = "dat";
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				pci-reset-hog {
+					gpio-hog;
+					gpios = <7 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "PCI reset";
+				};
+				pstn-relay-hog-1 {
+					gpio-hog;
+					gpios = <11 GPIO_ACTIVE_HIGH>;
+					output-low;
+					line-name = "PSTN relay control 1";
+				};
+				pstn-relay-hog-2 {
+					gpio-hog;
+					gpios = <12 GPIO_ACTIVE_HIGH>;
+					output-low;
+					line-name = "PSTN relay control 2";
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 13 */
+			<0x6800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 8 */
+			<0x6800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 6 */
+			/* IDSEL 14 */
+			<0x7000 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 7 */
+			<0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 8 */
+			/* IDSEL 15 */
+			<0x7800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 15 is irq 6 */
+			<0x7800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 15 is irq 7 */
+		};
+
+		ethb: ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "mii";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* 1, 2, 3 and 4 are ports on the KS8995 switch */
+				phy1: ethernet-phy@1 {
+					/* LAN1 */
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					/* LAN2 */
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					/* LAN3 */
+					reg = <3>;
+				};
+				phy4: ethernet-phy@4 {
+					/* LAN4 */
+					reg = <4>;
+				};
+			};
+		};
+
+		ethc: ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "mii";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-adi-coyote.dts
index bd4230d7dac9..765ab36e6f0c 100644
--- a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-adi-coyote.dts
@@ -56,7 +56,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from Coyote PCI boardfile.
@@ -80,7 +80,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -102,7 +102,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-arcom-vulcan.dts
index 92b987bc3f99..6f5b4e4eb1cc 100644
--- a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-arcom-vulcan.dts
@@ -112,7 +112,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from Vulcan PCI boardfile.
@@ -137,7 +137,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -159,7 +159,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts
index 5ab09fb10dae..fa133c913606 100644
--- a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts
@@ -57,7 +57,7 @@
 
 		button-reset {
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 		};
@@ -122,7 +122,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from DSM-G600 PCI boardfile (dsmg600-pci.c)
diff --git a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts
index b740403b05a9..73d3c11dd0d4 100644
--- a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts
@@ -44,7 +44,7 @@
 		};
 		button-reset {
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
 		};
@@ -159,7 +159,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Written based on the FSG-3 PCI boardfile.
@@ -187,7 +187,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -209,7 +209,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
index b7cbc90e1c18..6d5e69035f94 100644
--- a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
@@ -53,13 +53,15 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from Gateway 7001 PCI boardfile (gateway7001-pci.c)
 			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
 			 * each handling all IRQs.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 1 */
 			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
@@ -74,7 +76,7 @@
 		};
 
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -91,7 +93,7 @@
 		};
 
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateworks-gw2348.dts
index a5943f51e8c2..97e3f25bb210 100644
--- a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateworks-gw2348.dts
@@ -108,7 +108,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from Avila PCI boardfile.
@@ -142,7 +142,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -164,7 +164,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
index f80388b17a9e..5f4c849915db 100644
--- a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
@@ -82,13 +82,15 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * The device has 4 slots (IDSEL) with one dedicated IRQ per slot.
 			 * The slots have Ethernet, Ethernet, NEC and MPCI.
 			 * The IDSELs are 11, 12, 13, 14.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 11 - Ethernet A */
 			<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
@@ -148,7 +150,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 32>;
 			phy-mode = "rgmii";
@@ -170,7 +172,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 33>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-iomega-nas100d.dts
index cbc87b344f6a..26f02dad6a54 100644
--- a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-iomega-nas100d.dts
@@ -63,7 +63,7 @@
 		};
 		button-reset {
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
 		};
@@ -109,7 +109,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from NAS 100D PCI boardfile (nas100d-pci.c)
@@ -129,7 +129,7 @@
 		};
 
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdp425.dts
index beaadda4685f..194945748dc3 100644
--- a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdp425.dts
@@ -40,7 +40,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -62,7 +62,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdpg425.dts
index f17cab12a64b..7011fea6205b 100644
--- a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdpg425.dts
@@ -61,7 +61,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from IXDPG425 PCI boardfile.
@@ -95,7 +95,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -117,7 +117,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts
index 0edc5928e00b..2f7c34c649ea 100644
--- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts
@@ -65,7 +65,7 @@
 		};
 		button-reset {
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 		};
@@ -90,17 +90,26 @@
 		timeout-ms = <5000>;
 	};
 
-	gpio-beeper {
-		compatible = "gpio-beeper";
+	gpio_pwm: pwm {
+		#pwm-cells = <3>;
+		compatible = "pwm-gpio";
 		gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
 	};
 
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&gpio_pwm 0 1 0>;
+		beeper-hz = <1000>;
+	};
+
 	soc {
 		bus@c4000000 {
 			/* The first 16MB region at CS0 on the expansion bus */
 			flash@0,0 {
 				compatible = "intel,ixp4xx-flash", "cfi-flash";
 				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
 				/*
 				 * 8 MB of Flash in 0x20000 byte blocks
 				 * mapped in at CS0.
@@ -116,7 +125,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant
@@ -143,7 +152,7 @@
 		};
 
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-wrv54g.dts
new file mode 100644
index 000000000000..cb1842c83ac8
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-wrv54g.dts
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Linksys WRV54G router
+ * Also known as Gemtek GTWX5715
+ * Based on a board file by George T. Joseph and other patches.
+ * This machine is based on IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Linksys WRV54G / Gemtek GTWX5715";
+	compatible = "linksys,wrv54g", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB memory */
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* UART2 is the primary console */
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	/* There is an unpopulated LED slot (3) connected to GPIO 8 */
+	leds {
+		compatible = "gpio-leds";
+		led-power {
+			label = "wrv54g:yellow:power";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-wireless {
+			label = "wrv54g:yellow:wireless";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		led-internet {
+			label = "wrv54g:yellow:internet";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		led-dmz {
+			label = "wrv54g:green:dmz";
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	/* This set-up comes from an OpenWrt patch */
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		ethernet-switch@0 {
+			compatible = "micrel,ks8995";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+
+			/*
+			 * The PHYs are accessed over the external MDIO
+			 * bus and not internally through the switch control
+			 * registers.
+			 */
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-port@0 {
+					reg = <0>;
+					label = "1";
+					phy-mode = "mii";
+					phy-handle = <&phy1>;
+				};
+				ethernet-port@1 {
+					reg = <1>;
+					label = "2";
+					phy-mode = "mii";
+					phy-handle = <&phy2>;
+				};
+				ethernet-port@2 {
+					reg = <2>;
+					label = "3";
+					phy-mode = "mii";
+					phy-handle = <&phy3>;
+				};
+				ethernet-port@3 {
+					reg = <3>;
+					label = "4";
+					phy-mode = "mii";
+					phy-handle = <&phy4>;
+				};
+				ethernet-port@4 {
+					reg = <4>;
+					ethernet = <&ethb>;
+					phy-mode = "mii";
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+			};
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 8 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x00800000>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					/*
+					 * Partition info from a boot log
+					 * CHECKME: not using redboot? FIS index 0x3f @7e00000?
+					 */
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "boot";
+						reg = <0x0 0x140000>;
+						read-only;
+					};
+					partition@140000 {
+						label = "linux";
+						reg = <0x140000 0x100000>;
+						read-only;
+					};
+					partition@240000 {
+						label = "root";
+						reg = <0x240000 0x480000>;
+						read-write;
+					};
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * We have up to 2 slots (IDSEL) with 2 swizzled IRQs.
+			 * Derived from the GTWX5715 PCI boardfile.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 0 */
+			<0x0000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 0 is irq 10 */
+			<0x0000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 0 is irq 11 */
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 1 is irq 10 */
+		};
+
+		/*
+		 * EthB connects to the KS8995 CPU port and faces ports 1-4
+		 * through the switch fabric.
+		 *
+		 * To complicate things, the MDIO channel is also only
+		 * accessible through EthB, but used independently for PHY
+		 * control.
+		 */
+		ethb: ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "mii";
+			fixed-link {
+				speed = <100>;
+				full-duplex;
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * LAN ports 1-4 on the KS8995 switch
+				 * and PHY5 for WAN need to be accessed
+				 * through this external MDIO channel.
+				 */
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					reg = <3>;
+				};
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/*
+		 * EthC connects to MII-P5 on the KS8995 bypassing
+		 * all of the switch logic and facing PHY5
+		 */
+		ethc: ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "mii";
+			phy-handle = <&phy5>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts
new file mode 100644
index 000000000000..a351a97d257e
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Netgear WG302v2 based on IXP422BB
+ * Derived from boardfiles written by Imre Kaloz
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Netgear WG302 v1";
+	compatible = "netgear,wg302v1", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM according to boot arguments */
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		/* The RedBoot comes up in 9600 baud so let's keep this */
+		bootargs = "console=ttyS0,9600n8";
+		stdout-path = "uart1:9600n8";
+	};
+
+	aliases {
+		/* These are switched around */
+		serial0 = &uart1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		test_led: led-test {
+			color = <LED_COLOR_ID_AMBER>;
+			function = "test";
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		wlan_led: led-wlan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "phy0tx";
+		};
+	};
+
+	gpio_keys {
+		/* RESET is on GPIO13 which can't fire interrupts */
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button-reset {
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of Flash in 64 0x20000 sized blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x800000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					fis-index-block = <0x3f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from WG302 v1 PCI boardfile (wg302v1-pci.c)
+			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+			 * each handling all IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 8 */
+			<0x0800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 8 */
+			<0x0800 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 8 */
+			<0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 10 */
+			<0x1000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 10 */
+			<0x1000 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 10 */
+		};
+
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy30>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy30: ethernet-phy@30 {
+					reg = <30>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
new file mode 100644
index 000000000000..2c89db34c8d8
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the USRobotics USR8200 firewall
+ * VPN and NAS. Based on know-how from Peter Denison.
+ *
+ * This machine is based on IXP422, the USR internal codename
+ * is "Jeeves".
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "USRobotics USR8200";
+	compatible = "usr,usr8200", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* These are switched around */
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		ieee1394_led: led-1394 {
+			label = "usr8200:green:1394";
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		usb1_led: led-usb1 {
+			label = "usr8200:green:usb1";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		usb2_led: led-usb2 {
+			label = "usr8200:green:usb2";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		wireless_led: led-wireless {
+			/*
+			 * This LED is mounted inside the case but cannot be
+			 * seen from the outside: probably USR planned at one
+			 * point for the device to have a wireless card, then
+			 * changed their mind and didn't mount it, leaving the
+			 * LED in place.
+			 */
+			label = "usr8200:green:wireless";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		pwr_led: led-pwr {
+			label = "usr8200:green:pwr";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+			rtc@2,0 {
+				/* EPSON RTC7301 DG DIL-capsule */
+				compatible = "epson,rtc7301dg";
+				/*
+				 * These timing settings were found in the boardfile patch:
+				 * IXP4XX_EXP_CS2 = 0x3fff000 | IXP4XX_EXP_BUS_SIZE(0) | IXP4XX_EXP_BUS_WR_EN |
+				 *                  IXP4XX_EXP_BUS_CS_EN | IXP4XX_EXP_BUS_BYTE_EN;
+				 */
+				intel,ixp4xx-eb-t1 = <0>; // no cycles extra address phase
+				intel,ixp4xx-eb-t2 = <0>; // no cycles extra setup phase
+				intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
+				intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
+				intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
+				intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle
+				intel,ixp4xx-eb-byte-access-on-halfword = <0>;
+				intel,ixp4xx-eb-mux-address-and-data = <0>;
+				intel,ixp4xx-eb-ahb-split-transfers = <0>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+				/* 512 bytes at CS2 */
+				reg = <2 0x00000000 0x0000200>;
+				reg-io-width = <1>;
+				native-endian;
+				/* FIXME: try to check if there is an IRQ for the RTC? */
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from USR8200 boardfile from OpenWrt
+			 *
+			 * We have 3 slots (IDSEL) with partly swizzled IRQs on slot 16.
+			 * We assume the same IRQ for all pins on the remaining slots, that
+			 * is what the boardfile was doing.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 14 used for "Wireless" in the board file */
+			<0x7000 0 0 1 &gpio0 7  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 7 */
+			/* IDSEL 15 used for VIA VT6307 IEEE 1394 Firewire */
+			<0x7800 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 15 is irq 8 */
+			/* IDSEL 16 used for VIA VT6202 USB 2.0 4+1 */
+			<0x8000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 16 is irq 11 */
+			<0x8000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 16 is irq 10 */
+			<0x8000 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT C on slot 16 is irq 9 */
+		};
+
+		gpio@c8004000 {
+			/* Enable clock out on GPIO 15 */
+			intel,ixp4xx-gpio15-clkout;
+		};
+
+		/* EthB WAN */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy9>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * PHY 0..4 are internal to the MV88E6060 switch but appear
+				 * as independent devices.
+				 */
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					reg = <3>;
+				};
+
+				/* Altima AMI101L used by the WAN port */
+				phy9: ethernet-phy@9 {
+					reg = <9>;
+				};
+
+				/* The switch uses MDIO addresses 16 thru 31 */
+				switch@16 {
+					compatible = "marvell,mv88e6060";
+					reg = <16>;
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+							label = "lan1";
+							phy-handle = <&phy0>;
+						};
+
+						port@1 {
+							reg = <1>;
+							label = "lan2";
+							phy-handle = <&phy1>;
+						};
+
+						port@2 {
+							reg = <2>;
+							label = "lan3";
+							phy-handle = <&phy2>;
+						};
+
+						port@3 {
+							reg = <3>;
+							label = "lan4";
+							phy-handle = <&phy3>;
+						};
+
+						port@5 {
+							/* Port 5 is the CPU port according to the MV88E6060 datasheet */
+							reg = <5>;
+							phy-mode = "rgmii-id";
+							ethernet = <&ethc>;
+							label = "cpu";
+							fixed-link {
+								speed = <100>;
+								full-duplex;
+							};
+						};
+					};
+				};
+			};
+		};
+
+		/* EthC LAN connected to the Marvell DSA Switch */
+		ethc: ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			fixed-link {
+				speed = <100>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-welltech-epbx100.dts
index f5846a50e4d4..c550c421b659 100644
--- a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-welltech-epbx100.dts
@@ -76,5 +76,23 @@
 				};
 			};
 		};
+
+		/* LAN port */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/intel-ixp42x.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp42x.dtsi
index 84cee8ec3ab8..84cee8ec3ab8 100644
--- a/arch/arm/boot/dts/intel-ixp42x.dtsi
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x.dtsi
diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp43x-gateworks-gw2358.dts
index cf4010d60187..1db849515f9e 100644
--- a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp43x-gateworks-gw2358.dts
@@ -121,7 +121,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * In the boardfile for the Cambria from OpenWRT the interrupts
@@ -167,7 +167,7 @@
 		};
 
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
@@ -188,7 +188,7 @@
 		};
 
 		ethernet@c800c000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 2>;
 			queue-txready = <&qmgr 19>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp43x-kixrp435.dts
index 3d7cfa1a5ed4..4703a8b24765 100644
--- a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp43x-kixrp435.dts
@@ -36,7 +36,7 @@
 
 		/* CHECKME: ethernet set-up taken from Gateworks Cambria */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
@@ -57,7 +57,7 @@
 		};
 
 		ethernet@c800c000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 2>;
 			queue-txready = <&qmgr 19>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp43x.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp43x.dtsi
index 60bf9903e0f8..60bf9903e0f8 100644
--- a/arch/arm/boot/dts/intel-ixp43x.dtsi
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp43x.dtsi
diff --git a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp45x-ixp46x.dtsi
index 1dd4a65cb7a6..1dd4a65cb7a6 100644
--- a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp45x-ixp46x.dtsi
diff --git a/arch/arm/boot/dts/intel-ixp46x-ixdp465.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp46x-ixdp465.dts
index a062cd1a6588..a062cd1a6588 100644
--- a/arch/arm/boot/dts/intel-ixp46x-ixdp465.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp46x-ixdp465.dts
diff --git a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx-reference-design.dtsi
index 146352ba848b..31c0a69771c4 100644
--- a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx-reference-design.dtsi
@@ -99,7 +99,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from IXDP425 PCI boardfile.
diff --git a/arch/arm/boot/dts/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi
index 51a716c59669..0adeccabd4fe 100644
--- a/arch/arm/boot/dts/intel-ixp4xx.dtsi
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi
@@ -193,10 +193,10 @@
 			compatible = "intel,ixp4xx-ethernet";
 			reg = <0xc800c000 0x1000>;
 			status = "disabled";
-			intel,npe = <0>;
 			/* Dummy values that depend on firmware */
 			queue-rx = <&qmgr 0>;
 			queue-txready = <&qmgr 0>;
+			intel,npe-handle = <&npe 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/intel/pxa/Makefile b/arch/arm/boot/dts/intel/pxa/Makefile
new file mode 100644
index 000000000000..24d5240f08e7
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_PXA) += \
+	pxa300-raumfeld-connector.dtb \
+	pxa300-raumfeld-controller.dtb \
+	pxa300-raumfeld-speaker-l.dtb \
+	pxa300-raumfeld-speaker-m.dtb \
+	pxa300-raumfeld-speaker-one.dtb \
+	pxa300-raumfeld-speaker-s.dtb
diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/intel/pxa/pxa25x.dtsi
index 5f8300e356ad..5f8300e356ad 100644
--- a/arch/arm/boot/dts/pxa25x.dtsi
+++ b/arch/arm/boot/dts/intel/pxa/pxa25x.dtsi
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/intel/pxa/pxa27x.dtsi
index a2cbfb3be609..a2cbfb3be609 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/intel/pxa/pxa27x.dtsi
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/intel/pxa/pxa2xx.dtsi
index 84154c43fe65..84154c43fe65 100644
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ b/arch/arm/boot/dts/intel/pxa/pxa2xx.dtsi
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-common.dtsi
index 147c99191dc2..147c99191dc2 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-common.dtsi
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-connector.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-connector.dts
index 3e9445419e39..3e9445419e39 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-connector.dts
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-connector.dts
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-controller.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-controller.dts
index 12b15945ac6d..12b15945ac6d 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-controller.dts
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-controller.dts
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-l.dts
index 5a0f7f17856f..5a0f7f17856f 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-l.dts
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-m.dts
index fa10d896282c..fa10d896282c 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-m.dts
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-one.dts
index a70560a8ea92..a70560a8ea92 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-one.dts
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-s.dts
index 36e20cbf8704..36e20cbf8704 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-s.dts
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-tuneable-clock.dtsi
index 561483b93989..561483b93989 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-tuneable-clock.dtsi
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/intel/pxa/pxa3xx.dtsi
index f9c216f91865..f9c216f91865 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/intel/pxa/pxa3xx.dtsi
diff --git a/arch/arm/boot/dts/intel/socfpga/Makefile b/arch/arm/boot/dts/intel/socfpga/Makefile
new file mode 100644
index 000000000000..7f69a0355ea5
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/Makefile
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
+	socfpga_arria5_socdk.dtb \
+	socfpga_arria10_chameleonv3.dtb \
+	socfpga_arria10_mercury_pe1.dtb \
+	socfpga_arria10_socdk_nand.dtb \
+	socfpga_arria10_socdk_qspi.dtb \
+	socfpga_arria10_socdk_sdmmc.dtb \
+	socfpga_cyclone5_chameleon96.dtb \
+	socfpga_cyclone5_mcvevk.dtb \
+	socfpga_cyclone5_socdk.dtb \
+	socfpga_cyclone5_de0_nano_soc.dtb \
+	socfpga_cyclone5_de10nano.dtb \
+	socfpga_cyclone5_sockit.dtb \
+	socfpga_cyclone5_socrates.dtb \
+	socfpga_cyclone5_sodia.dtb \
+	socfpga_cyclone5_vining_fpga.dtb \
+	socfpga_vt.dtb
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi
index 2459f3cd7dd9..35be14150f41 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi
@@ -453,7 +453,6 @@
 						compatible = "altr,socfpga-gate-clk";
 						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
 						clk-gate = <0xa0 8>;
-						clk-phase = <0 135>;
 					};
 
 					sdmmc_clk_divided: sdmmc_clk_divided {
@@ -750,12 +749,12 @@
 			arm,prefetch-offset = <7>;
 		};
 
-		l3regs@0xff800000 {
+		l3regs@ff800000 {
 			compatible = "altr,l3regs", "syscon";
 			reg = <0xff800000 0x1000>;
 		};
 
-		mmc: dwmmc0@ff704000 {
+		mmc: mmc@ff704000 {
 			compatible = "altr,socfpga-dw-mshc";
 			reg = <0xff704000 0x1000>;
 			interrupts = <0 139 4>;
@@ -765,10 +764,11 @@
 			clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
 			clock-names = "biu", "ciu";
 			resets = <&rst SDMMC_RESET>;
+			altr,sysmgr-syscon = <&sysmgr 0x108 3>;
 			status = "disabled";
 		};
 
-		nand0: nand@ff900000 {
+		nand0: nand-controller@ff900000 {
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
 			compatible = "altr,socfpga-denali-nand";
@@ -905,7 +905,7 @@
 			reset-names = "timer";
 		};
 
-		uart0: serial0@ffc02000 {
+		uart0: serial@ffc02000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02000 0x1000>;
 			interrupts = <0 162 4>;
@@ -918,7 +918,7 @@
 			resets = <&rst UART0_RESET>;
 		};
 
-		uart1: serial1@ffc03000 {
+		uart1: serial@ffc03000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc03000 0x1000>;
 			interrupts = <0 163 4>;
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
index 4370e3cbbb4b..b108265e9bde 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
@@ -365,7 +365,6 @@
 						compatible = "altr,socfpga-a10-gate-clk";
 						clocks = <&sdmmc_free_clk>;
 						clk-gate = <0xC8 5>;
-						clk-phase = <0 135>;
 					};
 
 					qspi_clk: qspi_clk {
@@ -656,7 +655,7 @@
 			arm,shared-override;
 		};
 
-		mmc: dwmmc0@ff808000 {
+		mmc: mmc@ff808000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-dw-mshc";
@@ -666,10 +665,11 @@
 			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
 			clock-names = "biu", "ciu";
 			resets = <&rst SDMMC_RESET>;
+			altr,sysmgr-syscon = <&sysmgr 0x28 4>;
 			status = "disabled";
 		};
 
-		nand: nand@ffb90000 {
+		nand: nand-controller@ffb90000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-denali-nand";
@@ -845,7 +845,7 @@
 			reset-names = "timer";
 		};
 
-		uart0: serial0@ffc02000 {
+		uart0: serial@ffc02000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02000 0x100>;
 			interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -856,7 +856,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial1@ffc02100 {
+		uart1: serial@ffc02100 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02100 0x100>;
 			interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/socfpga_arria10_chameleonv3.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_chameleonv3.dts
index 422d00cd4c74..422d00cd4c74 100644
--- a/arch/arm/boot/dts/socfpga_arria10_chameleonv3.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_chameleonv3.dts
diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi
index ad7cd14de6b6..41f865c8c098 100644
--- a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi
@@ -73,6 +73,7 @@
 	cap-sd-highspeed;
 	broken-cd;
 	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
 };
 
 &osc1 {
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_pe1.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_pe1.dts
new file mode 100644
index 000000000000..cf533f76a9fd
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_pe1.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2023 Steffen Trumtrar <kernel@pengutronix.de>
+ */
+/dts-v1/;
+#include "socfpga_arria10_mercury_aa1.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ PE1";
+	compatible = "enclustra,mercury-pe1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&mmc {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk.dtsi
index ec7365444a3b..ec7365444a3b 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk.dtsi
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_nand.dts
index 9aa897b79544..a662df319a84 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_nand.dts
@@ -16,11 +16,11 @@
 
 		partition@0 {
 			label = "Boot and fpga data";
-			reg = <0x0 0x02000000>;
+			reg = <0x0 0x02500000>;
 		};
 		partition@1c00000 {
 			label = "Root Filesystem - JFFS2";
-			reg = <0x02000000 0x06000000>;
+			reg = <0x02500000 0x05500000>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts
index 11ccdc6c2dc6..0434f1c7b665 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts
@@ -17,8 +17,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <3>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_sdmmc.dts
index 64dc0799f3d7..d3969367f4b5 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_sdmmc.dts
@@ -12,6 +12,7 @@
 	cap-mmc-highspeed;
 	broken-cd;
 	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
 };
 
 &eccmgr {
diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5.dtsi
index 22dbf07afcff..40fecde65c54 100644
--- a/arch/arm/boot/dts/socfpga_arria5.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5.dtsi
@@ -18,11 +18,12 @@
 			};
 		};
 
-		mmc0: dwmmc0@ff704000 {
+		mmc0: mmc@ff704000 {
 			broken-cd;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
+			clk-phase-sd-hs = <0>, <135>;
 		};
 
 		sysmgr@ffd08000 {
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts
index 7f5458d8fccc..7342f5942b0d 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts
@@ -29,22 +29,22 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&porta 0 1>;
 		};
 
-		hps1 {
+		led-hps1 {
 			label = "hps_led1";
 			gpios = <&portb 11 1>;
 		};
 
-		hps2 {
+		led-hps2 {
 			label = "hps_led2";
 			gpios = <&porta 17 1>;
 		};
 
-		hps3 {
+		led-hps3 {
 			label = "hps_led3";
 			gpios = <&porta 18 1>;
 		};
@@ -124,8 +124,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5.dtsi
index 319a71e41ea4..305fe207b237 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5.dtsi
@@ -18,11 +18,12 @@
 			};
 		};
 
-		mmc0: dwmmc0@ff704000 {
+		mmc0: mmc@ff704000 {
 			broken-cd;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
+			clk-phase-sd-hs = <0>, <135>;
 		};
 
 		sysmgr@ffd08000 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_chameleon96.dts
index 76262f1e5e03..76262f1e5e03 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_chameleon96.dts
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de0_nano_soc.dts
index c8f051fb2bf6..bedf577cb056 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de0_nano_soc.dts
@@ -33,7 +33,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&portb 24 0>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de10nano.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de10nano.dts
new file mode 100644
index 000000000000..ec25106caacf
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de10nano.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017, Intel Corporation
+ *
+ * based on socfpga_cyclone5_de0_nano_soc.dts
+ */
+/dts-v1/;
+
+#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Terasic DE10-Nano";
+	compatible = "terasic,de10-nano", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		/* 1 GiB */
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	soc {
+		fpga: bus@ff200000 {
+			compatible = "simple-bus";
+			reg = <0xff200000 0x00200000>;
+			ranges = <0x00000000 0xff200000 0x00200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/*
+			 * Here the devices will appear if an FPGA image is
+			 * loaded. Their description is expected to be added
+			 * using a device tree overlay that matches the image.
+			 */
+		};
+	};
+};
+
+&gmac1 {
+	/* Uses a KSZ9031RNX phy */
+	phy-mode = "rgmii-id";
+	rxd0-skew-ps = <420>;
+	rxd1-skew-ps = <420>;
+	rxd2-skew-ps = <420>;
+	rxd3-skew-ps = <420>;
+	txen-skew-ps = <0>;
+	rxdv-skew-ps = <420>;
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	accelerometer@53 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+		/* HPS_GSENSOR_INT is routed to UART0_RX/CAN0_RX/SPIM0_SS1/HPS_GPIO61 */
+		interrupt-parent = <&portc>;
+		interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "INT1";
+	};
+};
+
+&mmc0 {
+	/* micro SD card socket J11 */
+	status = "okay";
+};
+
+&uart0 {
+	/*
+	 * Accessible via USB (FT232R) on Mini-USB plug J4
+	 * RX = TRACE_D0/SPIS0_CLK/UART0_RX/HPS_GPIO49
+	 * TX = TRACE_D1/SPIS0_MOSI/UART0_TX/HPS_GPIO50
+	 * no handshaking lines
+	 */
+	clock-frequency = <100000000>;
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcv.dtsi
index bd92806ffc12..3b9daddf91cd 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcv.dtsi
@@ -18,5 +18,6 @@
 
 &mmc0 {	/* On-SoM eMMC */
 	bus-width = <8>;
+	clk-phase-sd-hs = <0>, <135>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts
index ceaec29770c6..c1e1264bcb09 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts
@@ -50,8 +50,6 @@
 
 	stmpe1: stmpe811@41 {
 		compatible = "st,stmpe811";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0x41>;
 		id = <0>;
 		blocks = <0x5>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
index b2241205c7a9..97622febc44e 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
@@ -29,22 +29,22 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&portb 15 1>;
 		};
 
-		hps1 {
+		led-hps1 {
 			label = "hps_led1";
 			gpios = <&portb 14 1>;
 		};
 
-		hps2 {
+		led-hps2 {
 			label = "hps_led2";
 			gpios = <&portb 13 1>;
 		};
 
-		hps3 {
+		led-hps3 {
 			label = "hps_led3";
 			gpios = <&portb 12 1>;
 		};
@@ -129,8 +129,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
@@ -153,12 +151,6 @@
 
 &spi0 {
 	status = "okay";
-
-	spidev@0 {
-		compatible = "rohm,dh2228fv";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-	};
 };
 
 &usb1 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts
index 3dd99c7c95e0..9e4db7407f1a 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts
@@ -174,8 +174,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socrates.dts
index ca18b959e655..ca18b959e655 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socrates.dts
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
index 2564671fc1c6..e4794ccb8e41 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
@@ -66,8 +66,10 @@
 	mdio0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		phy0: ethernet-phy@0 {
-			reg = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@4 {
+			reg = <4>;
 			rxd0-skew-ps = <0>;
 			rxd1-skew-ps = <0>;
 			rxd2-skew-ps = <0>;
@@ -121,8 +123,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
index f24f17c2f5ee..170c1ae441a6 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
@@ -130,18 +130,18 @@
 		#gpio-cells = <2>;
 	};
 
-	temp: lm75@48 {
-		compatible = "lm75";
+	temp: temperature-sensor@48 {
+		compatible = "national,lm75";
 		reg = <0x48>;
 	};
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c01";
 		pagesize = <8>;
 		reg = <0x50>;
 	};
 
-	i2cswitch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -211,7 +211,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c02";
 		pagesize = <8>;
 		reg = <0x50>;
@@ -229,8 +229,6 @@
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
 
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
@@ -246,8 +244,6 @@
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
 
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_vt.dts
index a77846f73b34..845ab2cc5ce6 100644
--- a/arch/arm/boot/dts/socfpga_vt.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_vt.dts
@@ -29,7 +29,7 @@
 			};
 		};
 
-		dwmmc0@ff704000 {
+		mmc@ff704000 {
 			broken-cd;
 			bus-width = <4>;
 			cap-mmc-highspeed;
@@ -57,11 +57,11 @@
 			clock-frequency = <7000000>;
 		};
 
-		serial0@ffc02000 {
+		serial@ffc02000 {
 			clock-frequency = <7372800>;
 		};
 
-		serial1@ffc03000 {
+		serial@ffc03000 {
 			clock-frequency = <7372800>;
 		};
 
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
deleted file mode 100644
index 712d6042b132..000000000000
--- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts
+++ /dev/null
@@ -1,106 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell RD88F6192 Board descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file contains the definitions that are common between the three
- * variants of the Marvell Kirkwood Development Board.
- */
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6192.dtsi"
-
-/ {
-	model = "Marvell RD88F6192 reference design";
-	compatible = "marvell,rd88f6192", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_usb_power>;
-			pinctrl-names = "default";
-
-                        pmx_usb_power: pmx-usb-power {
-                                marvell,pins = "mpp10";
-                                marvell,function = "gpo";
-                        };
-		};
-
-		serial@12000 {
-			status = "okay";
-
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p128@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p128", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-			};
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	regulators {
-                compatible = "simple-bus";
-                #address-cells = <1>;
-                #size-cells = <0>;
-                pinctrl-0 = <&pmx_usb_power>;
-                pinctrl-names = "default";
-
-                usb_power: regulator@0 {
-                        compatible = "regulator-fixed";
-                        reg = <0>;
-                        regulator-name = "USB VBUS";
-                        regulator-min-microvolt = <5000000>;
-                        regulator-max-microvolt = <5000000>;
-                        enable-active-high;
-                        regulator-always-on;
-                        regulator-boot-on;
-                        gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-                };
-	};
-};
-
-&mdio {
-        status = "okay";
-
-        ethphy0: ethernet-phy@8 {
-                reg = <8>;
-        };
-};
-
-&eth0 {
-        status = "okay";
-        ethernet0-port@0 {
-                phy-handle = <&ethphy0>;
-        };
-};
-
-&pciec {
-        status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
deleted file mode 100644
index 24d9055c4a08..000000000000
--- a/arch/arm/boot/dts/lan966x-pcb8291.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * lan966x_pcb8291.dts - Device Tree file for PCB8291
- */
-/dts-v1/;
-#include "lan966x.dtsi"
-#include "dt-bindings/phy/phy-lan966x-serdes.h"
-
-/ {
-	model = "Microchip EVB - LAN9662";
-	compatible = "microchip,lan9662-pcb8291", "microchip,lan9662", "microchip,lan966";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		serial0 = &usart3;
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
-		priority = <200>;
-	};
-};
-
-&gpio {
-	fc3_b_pins: fc3-b-pins {
-		/* RX, TX */
-		pins = "GPIO_52", "GPIO_53";
-		function = "fc3_b";
-	};
-
-	can0_b_pins:  can0-b-pins {
-		/* RX, TX */
-		pins = "GPIO_35", "GPIO_36";
-		function = "can0_b";
-	};
-};
-
-&can0 {
-	pinctrl-0 = <&can0_b_pins>;
-	pinctrl-names = "default";
-	status = "disabled"; /* Conflict with switch */
-};
-
-&flx3 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-	status = "okay";
-
-	usart3: serial@200 {
-		pinctrl-0 = <&fc3_b_pins>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-};
-
-&mdio1 {
-	status = "okay";
-};
-
-&phy0 {
-	status = "okay";
-};
-
-&phy1 {
-	status = "okay";
-};
-
-&port0 {
-	phy-handle = <&phy0>;
-	phy-mode = "gmii";
-	phys = <&serdes 0 CU(0)>;
-	status = "okay";
-};
-
-&port1 {
-	phy-handle = <&phy1>;
-	phy-mode = "gmii";
-	phys = <&serdes 1 CU(1)>;
-	status = "okay";
-};
-
-&serdes {
-	status = "okay";
-};
-
-&switch {
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/marvell/Makefile b/arch/arm/boot/dts/marvell/Makefile
new file mode 100644
index 000000000000..1e0f5ff492f7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/Makefile
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MMP) += \
+	pxa168-aspenite.dtb \
+	pxa910-dkb.dtb \
+	mmp2-brownstone.dtb \
+	mmp2-olpc-xo-1-75.dtb \
+	mmp3-dell-ariel.dtb
+dtb-$(CONFIG_ARCH_ORION5X) += \
+	orion5x-kuroboxpro.dtb \
+	orion5x-lacie-d2-network.dtb \
+	orion5x-lacie-ethernet-disk-mini-v2.dtb \
+	orion5x-linkstation-lsgl.dtb \
+	orion5x-linkstation-lswtgl.dtb \
+	orion5x-linkstation-lschl.dtb \
+	orion5x-lswsgl.dtb \
+	orion5x-maxtor-shared-storage-2.dtb \
+	orion5x-netgear-wnr854t.dtb \
+	orion5x-rd88f5182-nas.dtb
+dtb-$(CONFIG_MACH_ARMADA_370) += \
+	armada-370-c200-v2.dtb \
+	armada-370-db.dtb \
+	armada-370-dlink-dns327l.dtb \
+	armada-370-mirabox.dtb \
+	armada-370-netgear-rn102.dtb \
+	armada-370-netgear-rn104.dtb \
+	armada-370-rd.dtb \
+	armada-370-seagate-nas-2bay.dtb \
+	armada-370-seagate-nas-4bay.dtb \
+	armada-370-seagate-personal-cloud.dtb \
+	armada-370-seagate-personal-cloud-2bay.dtb \
+	armada-370-synology-ds213j.dtb
+dtb-$(CONFIG_MACH_ARMADA_375) += \
+	armada-375-db.dtb
+dtb-$(CONFIG_MACH_ARMADA_38X) += \
+	armada-381-netgear-gs110emx.dtb \
+	armada-382-rd-ac3x-48g4x2xl.dtb \
+	armada-385-atl-x530.dtb \
+	armada-385-clearfog-gtr-s4.dtb \
+	armada-385-clearfog-gtr-l8.dtb \
+	armada-385-db-88f6820-amc.dtb \
+	armada-385-db-ap.dtb \
+	armada-385-linksys-caiman.dtb \
+	armada-385-linksys-cobra.dtb \
+	armada-385-linksys-rango.dtb \
+	armada-385-linksys-shelby.dtb \
+	armada-385-synology-ds116.dtb \
+	armada-385-turris-omnia.dtb \
+	armada-388-clearfog.dtb \
+	armada-388-clearfog-base.dtb \
+	armada-388-clearfog-pro.dtb \
+	armada-388-db.dtb \
+	armada-388-gp.dtb \
+	armada-388-helios4.dtb \
+	armada-388-rd.dtb
+dtb-$(CONFIG_MACH_ARMADA_39X) += \
+	armada-390-db.dtb \
+	armada-395-gp.dtb \
+	armada-398-db.dtb
+dtb-$(CONFIG_MACH_ARMADA_XP) += \
+	armada-xp-axpwifiap.dtb \
+	armada-xp-crs305-1g-4s.dtb \
+	armada-xp-crs305-1g-4s-bit.dtb \
+	armada-xp-crs326-24g-2s.dtb \
+	armada-xp-crs326-24g-2s-bit.dtb \
+	armada-xp-crs328-4c-20s-4s.dtb \
+	armada-xp-crs328-4c-20s-4s-bit.dtb \
+	armada-xp-db.dtb \
+	armada-xp-db-dxbc2.dtb \
+	armada-xp-db-xc3-24g4xg.dtb \
+	armada-xp-gp.dtb \
+	armada-xp-lenovo-ix4-300d.dtb \
+	armada-xp-linksys-mamba.dtb \
+	armada-xp-matrix.dtb \
+	armada-xp-netgear-rn2120.dtb \
+	armada-xp-openblocks-ax3-4.dtb \
+	armada-xp-synology-ds414.dtb
+dtb-$(CONFIG_MACH_DOVE) += \
+	dove-cubox.dtb \
+	dove-cubox-es.dtb \
+	dove-d2plug.dtb \
+	dove-d3plug.dtb \
+	dove-dove-db.dtb \
+	dove-sbc-a510.dtb
+dtb-$(CONFIG_MACH_KIRKWOOD) += \
+	kirkwood-4i-edge-200.dtb \
+	kirkwood-b3.dtb \
+	kirkwood-blackarmor-nas220.dtb \
+	kirkwood-c200-v1.dtb \
+	kirkwood-cloudbox.dtb \
+	kirkwood-d2net.dtb \
+	kirkwood-db-88f6281.dtb \
+	kirkwood-db-88f6282.dtb \
+	kirkwood-dir665.dtb \
+	kirkwood-dns320.dtb \
+	kirkwood-dns325.dtb \
+	kirkwood-dockstar.dtb \
+	kirkwood-dreamplug.dtb \
+	kirkwood-ds109.dtb \
+	kirkwood-ds110jv10.dtb \
+	kirkwood-ds111.dtb \
+	kirkwood-ds112.dtb \
+	kirkwood-ds209.dtb \
+	kirkwood-ds210.dtb \
+	kirkwood-ds212.dtb \
+	kirkwood-ds212j.dtb \
+	kirkwood-ds409.dtb \
+	kirkwood-ds409slim.dtb \
+	kirkwood-ds411.dtb \
+	kirkwood-ds411j.dtb \
+	kirkwood-ds411slim.dtb \
+	kirkwood-goflexnet.dtb \
+	kirkwood-guruplug-server-plus.dtb \
+	kirkwood-ib62x0.dtb \
+	kirkwood-iconnect.dtb \
+	kirkwood-iomega_ix2_200.dtb \
+	kirkwood-is2.dtb \
+	kirkwood-km_fixedeth.dtb \
+	kirkwood-km_kirkwood.dtb \
+	kirkwood-l-50.dtb \
+	kirkwood-laplug.dtb \
+	kirkwood-linkstation-lsqvl.dtb \
+	kirkwood-linkstation-lsvl.dtb \
+	kirkwood-linkstation-lswsxl.dtb \
+	kirkwood-linkstation-lswvl.dtb \
+	kirkwood-linkstation-lswxl.dtb \
+	kirkwood-linksys-viper.dtb \
+	kirkwood-lschlv2.dtb \
+	kirkwood-lsxhl.dtb \
+	kirkwood-mplcec4.dtb \
+	kirkwood-mv88f6281gtw-ge.dtb \
+	kirkwood-nas2big.dtb \
+	kirkwood-net2big.dtb \
+	kirkwood-net5big.dtb \
+	kirkwood-netgear_readynas_duo_v2.dtb \
+	kirkwood-netgear_readynas_nv+_v2.dtb \
+	kirkwood-ns2.dtb \
+	kirkwood-ns2lite.dtb \
+	kirkwood-ns2max.dtb \
+	kirkwood-ns2mini.dtb \
+	kirkwood-nsa310.dtb \
+	kirkwood-nsa310a.dtb \
+	kirkwood-nsa310s.dtb \
+	kirkwood-nsa320.dtb \
+	kirkwood-nsa325.dtb \
+	kirkwood-openblocks_a6.dtb \
+	kirkwood-openblocks_a7.dtb \
+	kirkwood-openrd-base.dtb \
+	kirkwood-openrd-client.dtb \
+	kirkwood-openrd-ultimate.dtb \
+	kirkwood-pogo_e02.dtb \
+	kirkwood-pogoplug-series-4.dtb \
+	kirkwood-rd88f6192.dtb \
+	kirkwood-rd88f6281-z0.dtb \
+	kirkwood-rd88f6281-a.dtb \
+	kirkwood-rs212.dtb \
+	kirkwood-rs409.dtb \
+	kirkwood-rs411.dtb \
+	kirkwood-sheevaplug.dtb \
+	kirkwood-sheevaplug-esata.dtb \
+	kirkwood-t5325.dtb \
+	kirkwood-topkick.dtb \
+	kirkwood-ts219-6281.dtb \
+	kirkwood-ts219-6282.dtb \
+	kirkwood-ts419-6281.dtb \
+	kirkwood-ts419-6282.dtb
diff --git a/arch/arm/boot/dts/armada-370-c200-v2.dts b/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts
index 84d40e1d70ef..84d40e1d70ef 100644
--- a/arch/arm/boot/dts/armada-370-c200-v2.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/marvell/armada-370-db.dts
index a7dc4c04d10b..a9a05d826f22 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-db.dts
@@ -119,7 +119,7 @@
 			"Out Jack", "HPL",
 			"Out Jack", "HPR",
 			"AIN1L", "In Jack",
-			"AIN1L", "In Jack";
+			"AIN1R", "In Jack";
 		status = "okay";
 
 		simple-audio-card,dai-link@0 {
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/marvell/armada-370-dlink-dns327l.dts
index 2008c6eaaa52..d4c4efabd254 100644
--- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-dlink-dns327l.dts
@@ -86,73 +86,64 @@
 
 		pinctrl-names = "default";
 
-		sata-r-amber-pin {
+		led-sata-r-amber {
 			label = "dns327l:amber:sata-r";
 			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 
-		sata-l-amber-pin {
+		led-sata-l-amber {
 			label = "dns327l:amber:sata-l";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 
-		backup-led-pin {
+		led-backup {
 			label = "dns327l:white:usb";
 			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			pinctrl-0 = <&xhci_pwr_pin>;
-			pinctrl-names = "default";
-			regulator-name = "USB3.0 Port Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-boot-on;
-			regulator-always-on;
-			gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
+	usb_power: regulator-1 {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&xhci_pwr_pin>;
+		pinctrl-names = "default";
+		regulator-name = "USB3.0 Port Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-always-on;
+		gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+	};
 
-		sata_r_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			pinctrl-0 = <&sata_r_pwr_pin>;
-			pinctrl-names = "default";
-			regulator-name = "SATA-R Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <2000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		};
+	sata_r_power: regulator-2 {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&sata_r_pwr_pin>;
+		pinctrl-names = "default";
+		regulator-name = "SATA-R Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <2000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+	};
 
-		sata_l_power: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			pinctrl-0 = <&sata_l_pwr_pin>;
-			pinctrl-names = "default";
-			regulator-name = "SATA-L Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <4000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-		};
+	sata_l_power: regulator-3 {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&sata_l_pwr_pin>;
+		pinctrl-names = "default";
+		regulator-name = "SATA-L Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <4000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/marvell/armada-370-mirabox.dts
index 7c2f5a79b50d..7c2f5a79b50d 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-mirabox.dts
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/marvell/armada-370-netgear-rn102.dts
index b0b640b7de40..079b37cf148a 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-netgear-rn102.dts
@@ -85,11 +85,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <8192>;
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/marvell/armada-370-netgear-rn104.dts
index 85e2e9e27a9f..d752ac1d7b58 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-netgear-rn104.dts
@@ -94,11 +94,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <8192>;
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/marvell/armada-370-rd.dts
index 6ba7699b69ed..f23f6b3fc8f3 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-rd.dts
@@ -20,6 +20,7 @@
 /dts-v1/;
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/gpio/gpio.h>
 #include "armada-370.dtsi"
 
@@ -61,8 +62,8 @@
 				status = "okay";
 				phy-mode = "rgmii-id";
 				fixed-link {
-					   speed = <1000>;
-					   full-duplex;
+					speed = <1000>;
+					full-duplex;
 				};
 			};
 
@@ -94,7 +95,7 @@
 			gpio-fan {
 				compatible = "gpio-fan";
 				gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-				gpio-fan,speed-map = <0 0 3000 1>;
+				gpio-fan,speed-map = <0 0>, <3000 1>;
 				pinctrl-0 = <&fan_pins>;
 				pinctrl-names = "default";
 			};
@@ -135,44 +136,53 @@
 	pinctrl-names = "default";
 	phy0: ethernet-phy@0 {
 		reg = <0>;
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_WHITE>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+		};
 	};
 
-	switch: switch@10 {
+	switch: ethernet-switch@10 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0x10>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 			};
 
-			port@1 {
-			       reg = <1>;
-			       label = "lan1";
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan1";
 			};
 
-			port@2 {
-			       reg = <2>;
-			       label = "lan2";
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan2";
 			};
 
-			port@3 {
-			       reg = <3>;
-			       label = "lan3";
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan3";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&eth1>;
+				phy-mode = "rgmii-id";
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
@@ -184,25 +194,25 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switchphy0: switchphy@0 {
+			switchphy0: ethernet-phy@0 {
 				reg = <0>;
 				interrupt-parent = <&switch>;
 				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy1: switchphy@1 {
+			switchphy1: ethernet-phy@1 {
 				reg = <1>;
 				interrupt-parent = <&switch>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy2: switchphy@2 {
+			switchphy2: ethernet-phy@2 {
 				reg = <2>;
 				interrupt-parent = <&switch>;
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy3: switchphy@3 {
+			switchphy3: ethernet-phy@3 {
 				reg = <3>;
 				interrupt-parent = <&switch>;
 				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
index 8dd242e668e6..6ec3dd3337f4 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
@@ -25,9 +25,9 @@
 
 	gpio-fan {
 		gpio-fan,speed-map =
-			<   0 3
-			  950 2
-			 1400 1
-			 1800 0>;
+			<   0 3>,
+			< 950 2>,
+			<1400 1>,
+			<1800 0>;
 	};
 };
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
new file mode 100644
index 000000000000..3011578a3124
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate NAS 4-Bay
+ * Code name (board/PCB)        : Dart 4-Bay
+ * Model name (case sticker)    : SRPD40
+ * Material desc (product spec) : STCUxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-nas-xbay.dtsi"
+#include <dt-bindings/leds/leds-ns2.h>
+
+/ {
+	model = "Seagate NAS 4-Bay (Dart, SRPD40)";
+	compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			ethernet@74000 {
+				status = "okay";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			i2c@11000 {
+				/* I2C GPIO expander (PCA9554A) */
+				pca9554: pca9554@21 {
+					compatible = "nxp,pca9554";
+					reg = <0x21>;
+					#gpio-cells = <2>;
+					gpio-controller;
+				};
+			};
+		};
+	};
+
+	regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA2 power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA3 power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-leds {
+		led-red-sata2 {
+			label = "dart:red:sata2";
+			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
+		};
+		led-red-sata3 {
+			label = "dart:red:sata3";
+			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds-ns2 {
+		compatible = "lacie,ns2-leds";
+
+		white-sata2 {
+			label = "dart:white:sata2";
+			cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>;
+			slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>;
+			num-modes = <4>;
+			modes-map = <NS_V2_LED_SATA 0 0
+				     NS_V2_LED_OFF  0 1
+				     NS_V2_LED_ON   1 0
+				     NS_V2_LED_ON   1 1>;
+		};
+		white-sata3 {
+			label = "dart:white:sata3";
+			cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
+			slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>;
+			num-modes = <4>;
+			modes-map = <NS_V2_LED_SATA 0 0
+				     NS_V2_LED_OFF  0 1
+				     NS_V2_LED_ON   1 0
+				     NS_V2_LED_ON   1 1>;
+		};
+	};
+
+	gpio-fan {
+		gpio-fan,speed-map =
+			<   0 3>,
+			< 800 2>,
+			<1050 1>,
+			<1300 0>;
+	};
+};
+
+&pciec {
+	/* SATA AHCI controller 88SE9170 */
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-xbay.dtsi
index 866b8630d407..ffb3179033e7 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-xbay.dtsi
@@ -70,34 +70,26 @@
 
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA0 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-		};
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA1 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		};
+	regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA0 power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 	};
 
 	gpio-fan {
@@ -132,21 +124,21 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		white-power {
+		led-white-power {
 			label = "dart:white:power";
 			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 
 		};
-		red-power {
+		led-red-power {
 			label = "dart:red:power";
 			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		};
-		red-sata0 {
+		led-red-sata0 {
 			label = "dart:red:sata0";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		red-sata1 {
+		led-red-sata1 {
 			label = "dart:red:sata1";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud-2bay.dts
new file mode 100644
index 000000000000..45d8ec5dfeb7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud-2bay.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate Personal Cloud 2-Bay
+ * Code name (board/PCB)        : Cumulus Max
+ * Model name (case sticker)    : SRN22C
+ * Material desc (product spec) : STCSxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-personal-cloud.dtsi"
+
+/ {
+	model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)";
+	compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <2>;
+			};
+		};
+	};
+
+	regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dts
index 578b54b39c8f..578b54b39c8f 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dts
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dtsi
index 702a85af2078..054124857235 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dtsi
@@ -53,32 +53,25 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
-		};
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA0 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-		};
+	regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	};
+
+	regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA0 power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
 	};
 
 	gpio-keys {
@@ -107,7 +100,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-sata0 {
+		led-red-sata0 {
 			label = "cumulus:red:sata0";
 			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
index e72b8ed4b997..02599a3e9816 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
@@ -91,9 +91,9 @@
 			};
 
 			ethernet@70000 {
-			       status = "okay";
-			       phy = <&phy1>;
-			       phy-mode = "sgmii";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
 			};
 
 			sata@a0000 {
@@ -113,14 +113,14 @@
 			 &gpio2  0 GPIO_ACTIVE_HIGH
 			 &gpio2  1 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       1000 1
-				       1150 2
-				       1350 4
-				       1500 3
-				       1650 5
-				       1750 6
-				       1900 7 >;
+		gpio-fan,speed-map = <   0 0>,
+				     <1000 1>,
+				     <1150 2>,
+				     <1350 4>,
+				     <1500 3>,
+				     <1650 5>,
+				     <1750 6>,
+				     <1900 7>;
 	};
 
 	gpio-leds {
@@ -142,38 +142,32 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
+	sata1_regulator: sata1-regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <2000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sata1_pwr_pin>;
 		pinctrl-names = "default";
+	};
 
-		sata1_regulator: sata1-regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <2000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata2_regulator: sata2-regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA2 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <4000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		};
+	sata2_regulator: sata2-regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA2 Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <4000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sata2_pwr_pin>;
+		pinctrl-names = "default";
 	};
 };
 
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/marvell/armada-370-xp.dtsi
index 0b8c2a64b36f..954c891e5aee 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-370-xp.dtsi
@@ -168,7 +168,6 @@
 			mpic: interrupt-controller@20a00 {
 				compatible = "marvell,mpic";
 				#interrupt-cells = <1>;
-				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
 			};
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/marvell/armada-370.dtsi
index 46e6d3ed8f35..2013a5ccecd3 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-370.dtsi
@@ -60,34 +60,54 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
 				#interrupt-cells = <1>;
                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 9>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/marvell/armada-375-db.dts
index 4c4092790a20..4c4092790a20 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/marvell/armada-375-db.dts
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/marvell/armada-375.dtsi
index 7f2f24a29e6c..99778b4b7e7b 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-375.dtsi
@@ -178,6 +178,8 @@
 
 			/* Network controller */
 			ethernet: ethernet@f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				compatible = "marvell,armada-375-pp2";
 				reg = <0xf0000 0xa000>, /* Packet Processor regs */
 				      <0xc0000 0x3060>, /* LMS regs */
@@ -187,15 +189,17 @@
 				clock-names = "pp_clk", "gop_clk";
 				status = "disabled";
 
-				eth0: eth0 {
+				eth0: ethernet-port@0 {
 					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <0>;
+					reg = <0>;
+					port-id = <0>; /* For backward compatibility. */
 					status = "disabled";
 				};
 
-				eth1: eth1 {
+				eth1: ethernet-port@1 {
 					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <1>;
+					reg = <1>;
+					port-id = <1>; /* For backward compatibility. */
 					status = "disabled";
 				};
 			};
@@ -372,7 +376,6 @@
 				compatible = "marvell,mpic";
 				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 				#interrupt-cells = <1>;
-				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
 				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -568,34 +571,54 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie1: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 		};
diff --git a/arch/arm/boot/dts/marvell/armada-380.dtsi b/arch/arm/boot/dts/marvell/armada-380.dtsi
new file mode 100644
index 000000000000..e94f22b0e9b5
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-380.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 380 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 380 family SoC";
+	compatible = "marvell,armada380";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6810-pinctrl";
+			};
+		};
+
+		pcie {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */>;
+
+			/* x1 port */
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/* x1 port */
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/* x1 port */
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
index 095df5567c93..5baf83e5253d 100644
--- a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
+++ b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
@@ -77,51 +77,49 @@
 	pinctrl-0 = <&mdio_pins>;
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6190";
-		#address-cells = <1>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		interrupt-parent = <&gpio1>;
 		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&switch_interrupt_pins>;
 		pinctrl-names = "default";
-		#size-cells = <0>;
 		reg = <0>;
 
 		mdio {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1: switch0phy1@1 {
+			switch0phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy2: switch0phy2@2 {
+			switch0phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy3: switch0phy3@3 {
+			switch0phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy4: switch0phy4@4 {
+			switch0phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy5: switch0phy5@5 {
+			switch0phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy6: switch0phy6@6 {
+			switch0phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy7: switch0phy7@7 {
+			switch0phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy8: switch0phy8@8 {
+			switch0phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -142,13 +140,13 @@
 			};
 		};
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				ethernet = <&eth0>;
-				label = "cpu";
+				phy-mode = "rgmii";
 				reg = <0>;
 
 				fixed-link {
@@ -158,55 +156,55 @@
 				};
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				label = "lan1";
 				phy-handle = <&switch0phy1>;
 				reg = <1>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				label = "lan2";
 				phy-handle = <&switch0phy2>;
 				reg = <2>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				label = "lan3";
 				phy-handle = <&switch0phy3>;
 				reg = <3>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				label = "lan4";
 				phy-handle = <&switch0phy4>;
 				reg = <4>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				label = "lan5";
 				phy-handle = <&switch0phy5>;
 				reg = <5>;
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				label = "lan6";
 				phy-handle = <&switch0phy6>;
 				reg = <6>;
 			};
 
-			port@7 {
+			ethernet-port@7 {
 				label = "lan7";
 				phy-handle = <&switch0phy7>;
 				reg = <7>;
 			};
 
-			port@8 {
+			ethernet-port@8 {
 				label = "lan8";
 				phy-handle = <&switch0phy8>;
 				reg = <8>;
 			};
 
-			port@9 {
+			ethernet-port@9 {
 				/* 88X3310P external phy */
 				label = "lan9";
 				phy-handle = <&phy1>;
@@ -214,7 +212,7 @@
 				reg = <9>;
 			};
 
-			port@a {
+			ethernet-port@a {
 				/* 88X3310P external phy */
 				label = "lan10";
 				phy-handle = <&phy2>;
diff --git a/arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts b/arch/arm/boot/dts/marvell/armada-382-rd-ac3x-48g4x2xl.dts
index 584f0d0398a5..6ab65d21861a 100644
--- a/arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts
+++ b/arch/arm/boot/dts/marvell/armada-382-rd-ac3x-48g4x2xl.dts
@@ -40,7 +40,7 @@
 	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
-	eeprom@53{
+	eeprom@53 {
 		compatible = "atmel,24c64";
 		reg = <0x53>;
 	};
@@ -95,11 +95,11 @@
 				reg = <0x00000000 0x00500000>;
 				label = "u-boot";
 			};
-			partition@500000{
+			partition@500000 {
 				reg = <0x00500000 0x00400000>;
 				label = "u-boot env";
 			};
-			partition@900000{
+			partition@900000 {
 				reg = <0x00900000 0x3F700000>;
 				label = "user";
 			};
diff --git a/arch/arm/boot/dts/armada-385-atl-x530.dts b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts
index 241f5d7c80e9..2fb7304039be 100644
--- a/arch/arm/boot/dts/armada-385-atl-x530.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts
@@ -43,6 +43,17 @@
 			};
 		};
 	};
+
+	led-7seg {
+		compatible = "gpio-7-segment";
+		segment-gpios = <&led_7seg_gpio 0 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 1 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 2 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 3 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 4 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 5 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 6 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &pciec {
@@ -149,7 +160,7 @@
 			#size-cells = <0>;
 			reg = <3>;
 
-			gpio@20 {
+			led_7seg_gpio: gpio@20 {
 				compatible = "nxp,pca9554";
 				gpio-controller;
 				#gpio-cells = <2>;
@@ -179,19 +190,19 @@
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			partition@u-boot {
+			partition@0 {
 				reg = <0x00000000 0x00100000>;
 				label = "u-boot";
 			};
-			partition@u-boot-env {
+			partition@100000 {
 				reg = <0x00100000 0x00040000>;
 				label = "u-boot-env";
 			};
-			partition@unused {
+			partition@140000 {
 				reg = <0x00140000 0x00e80000>;
 				label = "unused";
 			};
-			partition@idprom {
+			partition@fc0000 {
 				reg = <0x00fc0000 0x00040000>;
 				label = "idprom";
 			};
@@ -216,16 +227,16 @@
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			partition@user {
+			partition@0 {
 				reg = <0x00000000 0x0f000000>;
 				label = "user";
 			};
-			partition@errlog {
+			partition@f000000 {
 				/* Maximum mtdoops size is 8MB, so set to that. */
 				reg = <0x0f000000 0x00800000>;
 				label = "errlog";
 			};
-			partition@nand-bbt {
+			partition@f800000 {
 				reg = <0x0f800000 0x00800000>;
 				label = "nand-bbt";
 			};
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
new file mode 100644
index 000000000000..cb85f8e31dfc
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+	model = "SolidRun Clearfog GTR L8";
+	compatible = "solidrun,clearfog-gtr-l8", "marvell,armada385",
+		     "marvell,armada380";
+
+	/* CON25 */
+	sfp1: sfp-1 {
+		compatible = "sff,sfp";
+		pinctrl-0 = <&cf_gtr_sfp1_pins>;
+		pinctrl-names = "default";
+		i2c-bus = <&i2c0>;
+		mod-def0-gpio = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mdio {
+	switch0: ethernet-switch@4 {
+		compatible = "marvell,mv88e6190";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-handle = <&switch0phy0>;
+			};
+
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-handle = <&switch0phy1>;
+			};
+
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-handle = <&switch0phy2>;
+			};
+
+			ethernet-port@4 {
+				reg = <4>;
+				label = "lan4";
+				phy-handle = <&switch0phy3>;
+			};
+
+			ethernet-port@5 {
+				reg = <5>;
+				label = "lan5";
+				phy-handle = <&switch0phy4>;
+			};
+
+			ethernet-port@6 {
+				reg = <6>;
+				label = "lan6";
+				phy-handle = <&switch0phy5>;
+			};
+
+			ethernet-port@7 {
+				reg = <7>;
+				label = "lan7";
+				phy-handle = <&switch0phy6>;
+			};
+
+			ethernet-port@8 {
+				reg = <8>;
+				label = "lan8";
+				phy-handle = <&switch0phy7>;
+			};
+
+			ethernet-port@9 {
+				reg = <9>;
+				label = "lan-sfp";
+				phy-mode = "sgmii";
+				sfp = <&sfp1>;
+				managed = "in-band-status";
+			};
+
+			ethernet-port@10 {
+				reg = <10>;
+				phy-mode = "2500base-x";
+				ethernet = <&eth1>;
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy1: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy2: ethernet-phy@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy3: ethernet-phy@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy4: ethernet-phy@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy5: ethernet-phy@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy6: ethernet-phy@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy7: ethernet-phy@8 {
+				reg = <0x8>;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
new file mode 100644
index 000000000000..5f83d981449a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+	model = "SolidRun Clearfog GTR S4";
+	compatible = "solidrun,clearfog-gtr-s4", "marvell,armada385",
+		     "marvell,armada380";
+};
+
+&sfp0 {
+	tx-fault-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+};
+
+&mdio {
+	switch0: ethernet-switch@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-handle = <&switch0phy0>;
+			};
+
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-handle = <&switch0phy2>;
+			};
+
+			ethernet-port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			ethernet-port@5 {
+				reg = <5>;
+				phy-mode = "2500base-x";
+				ethernet = <&eth1>;
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: ethernet-phy@11 {
+				reg = <0x11>;
+			};
+
+			switch0phy1: ethernet-phy@12 {
+				reg = <0x12>;
+			};
+
+			switch0phy2: ethernet-phy@13 {
+				reg = <0x13>;
+			};
+
+			switch0phy3: ethernet-phy@14 {
+				reg = <0x14>;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
index d1452a04e904..7aa71a9aa1bb 100644
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
@@ -141,18 +141,13 @@
 			};
 
 			pinctrl@18000 {
-				cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins {
-					marvell,pins = "mpp18";
-					marvell,function = "gpio";
-				};
-
-				cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus {
-					marvell,pins = "mpp22";
+				cf_gtr_fan_pwm: cf-gtr-fan-pwm {
+					marvell,pins = "mpp23";
 					marvell,function = "gpio";
 				};
 
-				cf_gtr_fan_pwm: cf-gtr-fan-pwm {
-					marvell,pins = "mpp23";
+				cf_gtr_front_button_pins: cf-gtr-front-button-pins {
+					marvell,pins = "mpp53";
 					marvell,function = "gpio";
 				};
 
@@ -162,6 +157,37 @@
 					marvell,function = "i2c1";
 				};
 
+				cf_gtr_isolation_pins: cf-gtr-isolation-pins {
+					marvell,pins = "mpp47";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_led_pins: led-pins {
+					marvell,pins = "mpp42", "mpp52";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_lte_disable_pins: lte-disable-pins {
+					marvell,pins = "mpp34";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_pci_pins: pci-pins {
+					// pci reset
+					marvell,pins = "mpp33", "mpp35", "mpp44";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins {
+					marvell,pins = "mpp48";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_rear_button_pins: cf-gtr-rear-button-pins {
+					marvell,pins = "mpp36";
+					marvell,function = "gpio";
+				};
+
 				cf_gtr_sdhci_pins: cf-gtr-sdhci-pins {
 					marvell,pins = "mpp21", "mpp28",
 						       "mpp37", "mpp38",
@@ -169,13 +195,15 @@
 					marvell,function = "sd0";
 				};
 
-				cf_gtr_isolation_pins: cf-gtr-isolation-pins {
-					marvell,pins = "mpp47";
+				cf_gtr_sfp0_pins: sfp0-pins {
+					/* sfp modabs, txdisable */
+					marvell,pins = "mpp25", "mpp46";
 					marvell,function = "gpio";
 				};
 
-				cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins {
-					marvell,pins = "mpp48";
+				cf_gtr_sfp1_pins: sfp1-pins {
+					/* sfp modabs, txdisable */
+					marvell,pins = "mpp24", "mpp54";
 					marvell,function = "gpio";
 				};
 
@@ -184,13 +212,18 @@
 					marvell,function = "spi1";
 				};
 
-				cf_gtr_front_button_pins: cf-gtr-front-button-pins {
-					marvell,pins = "mpp53";
+				cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins {
+					marvell,pins = "mpp18";
 					marvell,function = "gpio";
 				};
 
-				cf_gtr_rear_button_pins: cf-gtr-rear-button-pins {
-					marvell,pins = "mpp36";
+				cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus {
+					marvell,pins = "mpp22";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_wifi_disable_pins: wifi-disable-pins {
+					marvell,pins = "mpp30", "mpp31";
 					marvell,function = "gpio";
 				};
 			};
@@ -221,21 +254,26 @@
 		};
 
 		pcie {
+			pinctrl-0 = <&cf_gtr_pci_pins>;
+			pinctrl-names = "default";
 			status = "okay";
 			/*
 			 * The PCIe units are accessible through
 			 * the mini-PCIe connectors on the board.
 			 */
+			/* CON3 - serdes 0 */
 			pcie@1,0 {
 				reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 				status = "okay";
 			};
 
+			/* CON4 - serdes 2 */
 			pcie@2,0 {
 				reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 				status = "okay";
 			};
 
+			/* CON2 - serdes 4 */
 			pcie@3,0 {
 				reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 				status = "okay";
@@ -243,10 +281,12 @@
 		};
 	};
 
-	sfp0: sfp {
+	/* CON5 */
+	sfp0: sfp-0 {
 		compatible = "sff,sfp";
+		pinctrl-0 = <&cf_gtr_sfp0_pins>;
+		pinctrl-names = "default";
 		i2c-bus = <&i2c1>;
-		los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 		mod-def0-gpio = <&gpio0 25 GPIO_ACTIVE_LOW>;
 		tx-disable-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 	};
@@ -273,6 +313,8 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = <&cf_gtr_led_pins>;
+		pinctrl-names = "default";
 
 		led1 {
 			function = LED_FUNCTION_CPU;
@@ -381,14 +423,14 @@
 	status = "okay";
 
 	/* U26 temperature sensor placed near SoC */
-	temp1: nct75@4c {
-		compatible = "lm75";
+	temp1: temperature-sensor@4c {
+		compatible = "ti,tmp75c";
 		reg = <0x4c>;
 	};
 
 	/* U27 temperature sensor placed near RTC battery */
-	temp2: nct75@4d {
-		compatible = "lm75";
+	temp2: temperature-sensor@4d {
+		compatible = "ti,tmp75c";
 		reg = <0x4d>;
 	};
 
@@ -408,10 +450,10 @@
 };
 
 &gpio0 {
-	pinctrl-0 = <&cf_gtr_fan_pwm>;
+	pinctrl-0 = <&cf_gtr_fan_pwm &cf_gtr_wifi_disable_pins>;
 	pinctrl-names = "default";
 
-	wifi-disable {
+	wifi-disable-hog {
 		gpio-hog;
 		gpios = <30 GPIO_ACTIVE_LOW>, <31 GPIO_ACTIVE_LOW>;
 		output-low;
@@ -420,10 +462,10 @@
 };
 
 &gpio1 {
-	pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins>;
+	pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins &cf_gtr_lte_disable_pins>;
 	pinctrl-names = "default";
 
-	lte-disable {
+	lte-disable-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_LOW>;
 		output-low;
@@ -434,14 +476,14 @@
 	 * This signal, when asserted, isolates Armada 38x sample at reset pins
 	 * from control of external devices. Should be de-asserted after reset.
 	 */
-	sar-isolation {
+	sar-isolation-hog {
 		gpio-hog;
 		gpios = <15 GPIO_ACTIVE_LOW>;
 		output-low;
 		line-name = "sar-isolation";
 	};
 
-	poe-reset {
+	poe-reset-hog {
 		gpio-hog;
 		gpios = <16 GPIO_ACTIVE_LOW>;
 		output-low;
diff --git a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts b/arch/arm/boot/dts/marvell/armada-385-db-88f6820-amc.dts
index 389d9c75d546..389d9c75d546 100644
--- a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-db-88f6820-amc.dts
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/marvell/armada-385-db-ap.dts
index 332f8fce77dc..332f8fce77dc 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-db-ap.dts
diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/marvell/armada-385-linksys-caiman.dts
index a03050c97084..88b2921fed55 100644
--- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys-caiman.dts
@@ -62,11 +62,11 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		label = "caiman:white:power";
 	};
 
-	sata {
+	led-sata {
 		label = "caiman:white:sata";
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/marvell/armada-385-linksys-cobra.dts
index e3e4877a6f49..88200f930d0d 100644
--- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys-cobra.dts
@@ -62,11 +62,11 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		label = "cobra:white:power";
 	};
 
-	sata {
+	led-sata {
 		label = "cobra:white:sata";
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/marvell/armada-385-linksys-rango.dts
index 3c4af57ec2b9..4ab45f294de2 100644
--- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys-rango.dts
@@ -54,22 +54,22 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 		label = "rango:white:power";
 	};
 
-	sata {
+	led-sata {
 		gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		label = "rango:white:sata";
 	};
 
-	wlan_2g {
+	led-wlan_2g {
 		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 		label = "rango:white:wlan_2g";
 	};
 
-	wlan_5g {
+	led-wlan_5g {
 		gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		label = "rango:white:wlan_5g";
 	};
diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/marvell/armada-385-linksys-shelby.dts
index 3451cd3e5dff..f1b1f22413f1 100644
--- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys-shelby.dts
@@ -62,11 +62,11 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		label = "shelby:white:power";
 	};
 
-	sata {
+	led-sata {
 		label = "shelby:white:sata";
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
index 116aca5e688f..4116ed60f709 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
@@ -71,12 +71,12 @@
 		pinctrl-0 = <&gpio_leds_pins>;
 		pinctrl-names = "default";
 
-		power {
+		led-power {
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		sata {
+		led-sata {
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "disk-activity";
@@ -158,44 +158,42 @@
 &mdio {
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan4";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan3";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "wan";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "sgmii";
 				ethernet = <&eth2>;
 
 				fixed-link {
diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
index 2622af73c9da..6caa5c50175a 100644
--- a/arch/arm/boot/dts/armada-385-synology-ds116.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
@@ -131,14 +131,14 @@
 			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
 				<&gpio1 17 GPIO_ACTIVE_HIGH>,
 				<&gpio1 16 GPIO_ACTIVE_HIGH>;
-			gpio-fan,speed-map = <   0 0
-					      1500 1
-					      2500 2
-					      3000 3
-					      3400 4
-					      3700 5
-					      3900 6
-					      4000 7>;
+			gpio-fan,speed-map = <   0 0>,
+					     <1500 1>,
+					     <2500 2>,
+					     <3000 3>,
+					     <3400 4>,
+					     <3700 5>,
+					     <3900 6>,
+					     <4000 7>;
 			#cooling-cells = <2>;
 		};
 
@@ -149,7 +149,7 @@
 			 * sata0, and accesses to SATA disk 0 make it blink so it
 			 * doesn't need to be declared here.
 			 */
-			orange {
+			led-orange {
 				gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 				label = "ds116:orange:disk";
 				default-state = "off";
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
index d1e0db6e5730..83fe00abd652 100644
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
@@ -23,6 +23,12 @@
 		stdout-path = &uart0;
 	};
 
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1024 MB */
@@ -105,6 +111,46 @@
 		 */
 		status = "disabled";
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		front-button {
+			label = "Front Button";
+			linux,code = <KEY_VENDOR>;
+			linux,can-disable;
+			gpios = <&mcu 0 12 GPIO_ACTIVE_HIGH>;
+			/* debouncing is done by the microcontroller */
+			debounce-interval = <0>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio_controller 1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&audio_controller {
+	/* Pin header U16, GPIO51 in SPDIFO mode */
+	pinctrl-0 = <&spdif_pins>;
+	pinctrl-names = "default";
+	spdif-mode;
+	status = "okay";
 };
 
 &bm {
@@ -166,6 +212,7 @@
 	buffer-manager = <&bm>;
 	bm,pool-long = <2>;
 	bm,pool-short = <3>;
+	label = "wan";
 };
 
 &i2c0 {
@@ -184,11 +231,27 @@
 			#size-cells = <0>;
 			reg = <0>;
 
-			/* STM32F0 command interface at address 0x2a */
+			mcu: system-controller@2a {
+				compatible = "cznic,turris-omnia-mcu";
+				reg = <0x2a>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&mcu_pins>;
+
+				interrupt-parent = <&gpio1>;
+				interrupts = <11 IRQ_TYPE_NONE>;
+
+				gpio-controller;
+				#gpio-cells = <3>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
 
 			led-controller@2b {
 				compatible = "cznic,turris-omnia-leds";
 				reg = <0x2b>;
+				interrupts-extended = <&mcu 11 IRQ_TYPE_NONE>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "okay";
@@ -401,12 +464,10 @@
 	};
 
 	/* Switch MV88E6176 at address 0x10 */
-	switch@10 {
+	ethernet-switch@10 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&swint_pins>;
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		dsa,member = <0 0>;
 		reg = <0x10>;
@@ -414,38 +475,37 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			ports@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 			};
 
-			ports@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan1";
 			};
 
-			ports@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			ports@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan3";
 			};
 
-			ports@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan4";
 			};
 
-			ports@5 {
+			ethernet-port@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&eth1>;
 				phy-mode = "rgmii-id";
 
@@ -455,12 +515,26 @@
 				};
 			};
 
-			/* port 6 is connected to eth0 */
+			ethernet-port@6 {
+				reg = <6>;
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
 		};
 	};
 };
 
 &pinctrl {
+	mcu_pins: mcu-pins {
+		marvell,pins = "mpp43";
+		marvell,function = "gpio";
+	};
+
 	pcawan_pins: pcawan-pins {
 		marvell,pins = "mpp46";
 		marvell,function = "gpio";
@@ -476,7 +550,7 @@
 		marvell,function = "spi0";
 	};
 
-	spi0cs1_pins: spi0cs1-pins {
+	spi0cs2_pins: spi0cs2-pins {
 		marvell,pins = "mpp26";
 		marvell,function = "spi0";
 	};
@@ -511,7 +585,7 @@
 		};
 	};
 
-	/* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
+	/* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
 };
 
 &uart0 {
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/marvell/armada-385.dtsi
index 83392b92dae2..be8d607c59b2 100644
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-385.dtsi
@@ -93,7 +93,7 @@
 			/* x1 port */
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -121,7 +121,7 @@
 			/* x1 port */
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -152,7 +152,7 @@
 			 */
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts
index f7daa3bc707e..cf32ba9b4e8e 100644
--- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts
@@ -34,7 +34,7 @@
 };
 
 &gpio0 {
-	phy1_reset {
+	phy1-reset-hog {
 		gpio-hog;
 		gpios = <19 GPIO_ACTIVE_LOW>;
 		output-low;
diff --git a/arch/arm/boot/dts/armada-388-clearfog-pro.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog-pro.dts
index ff890c09c3ed..ff890c09c3ed 100644
--- a/arch/arm/boot/dts/armada-388-clearfog-pro.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog-pro.dts
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
index 95299167dcf5..09bf2e6d4ed0 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
@@ -10,8 +10,9 @@
 
 / {
 	model = "SolidRun Clearfog A1";
-	compatible = "solidrun,clearfog-a1", "marvell,armada388",
-		"marvell,armada385", "marvell,armada380";
+	compatible = "solidrun,clearfog-pro-a1", "solidrun,clearfog-a1",
+		     "marvell,armada388", "marvell,armada385",
+		     "marvell,armada380";
 
 	soc {
 		internal-regs {
@@ -47,6 +48,8 @@
 
 &eth1 {
 	/* ethernet@30000 */
+	phy-mode = "1000base-x";
+
 	fixed-link {
 		speed = <1000>;
 		full-duplex;
@@ -90,57 +93,58 @@
 &mdio {
 	status = "okay";
 
-	switch@4 {
+	ethernet-switch@4 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <4>;
 		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
 		pinctrl-names = "default";
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan5";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan4";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan3";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan2";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan1";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&eth1>;
+				phy-mode = "1000base-x";
+
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
 				};
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				/* 88E1512 external phy */
 				reg = <6>;
 				label = "lan6";
+				phy-mode = "rgmii-id";
+
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/marvell/armada-388-clearfog.dtsi
index f8a06ae4a3c9..f8a06ae4a3c9 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dtsi
diff --git a/arch/arm/boot/dts/marvell/armada-388-db.dts b/arch/arm/boot/dts/marvell/armada-388-db.dts
new file mode 100644
index 000000000000..45cc784659fd
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388-db.dts
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 388 evaluation board
+ * (DB-88F6820)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+
+/ {
+	model = "Marvell Armada 385 Development Board";
+	compatible = "marvell,a385-db", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+				audio_codec: audio-codec@4a {
+					#sound-dai-cells = <0>;
+					compatible = "cirrus,cs42l51";
+					reg = <0x4a>;
+				};
+			};
+
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
+			};
+
+			usb@58000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
+			};
+
+			mdio@72004 {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@a8000 {
+				status = "okay";
+			};
+
+			sata@e0000 {
+				status = "okay";
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+				no-1-8-v;
+			};
+
+			audio-controller@e8000 {
+				pinctrl-0 = <&i2s_pins>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Armada 385 DB Audio";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Out Jack",
+			"Line", "In Jack";
+		simple-audio-card,routing =
+			"Out Jack", "HPL",
+			"Out Jack", "HPR",
+			"AIN1L", "In Jack",
+			"AIN1R", "In Jack";
+		status = "disabled";
+
+		simple-audio-card,dai-link@0 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 0>;
+			};
+
+			codec {
+				sound-dai = <&audio_codec>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+
+		simple-audio-card,dai-link@2 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/marvell/armada-388-gp.dts
index e2ba50520b6b..1de0a172aa5f 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-gp.dts
@@ -237,8 +237,8 @@
 		gpio-fan {
 			compatible = "gpio-fan";
 			gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
-			gpio-fan,speed-map = <	 0 0
-					      3000 1>;
+			gpio-fan,speed-map = <	 0 0>,
+					     <3000 1>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/marvell/armada-388-helios4.dts
index ec134e22bae3..ec134e22bae3 100644
--- a/arch/arm/boot/dts/armada-388-helios4.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-helios4.dts
diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/marvell/armada-388-rd.dts
index c0efafd45b33..c0efafd45b33 100644
--- a/arch/arm/boot/dts/armada-388-rd.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-rd.dts
diff --git a/arch/arm/boot/dts/armada-388.dtsi b/arch/arm/boot/dts/marvell/armada-388.dtsi
index f3a020ff577e..f3a020ff577e 100644
--- a/arch/arm/boot/dts/armada-388.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-388.dtsi
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/marvell/armada-38x-solidrun-microsom.dtsi
index 2c64bc6e5a17..2c64bc6e5a17 100644
--- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-38x-solidrun-microsom.dtsi
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/marvell/armada-38x.dtsi
index df3c8d1d8f64..1181b13deabc 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-38x.dtsi
@@ -289,6 +289,18 @@
 					marvell,pins = "mpp44";
 					marvell,function = "sata3";
 				};
+
+				i2s_pins: i2s-pins {
+					marvell,pins = "mpp48", "mpp49",
+						       "mpp50", "mpp51",
+						       "mpp52", "mpp53";
+					marvell,function = "audio";
+				};
+
+				spdif_pins: spdif-pins {
+					marvell,pins = "mpp51";
+					marvell,function = "audio";
+				};
 			};
 
 			gpio0: gpio@18100 {
@@ -298,6 +310,7 @@
 				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
+				gpio-ranges = <&pinctrl 0 0 32>;
 				#gpio-cells = <2>;
 				#pwm-cells = <2>;
 				interrupt-controller;
@@ -316,6 +329,7 @@
 				reg-names = "gpio", "pwm";
 				ngpios = <28>;
 				gpio-controller;
+				gpio-ranges = <&pinctrl 0 32 28>;
 				#gpio-cells = <2>;
 				#pwm-cells = <2>;
 				interrupt-controller;
@@ -394,7 +408,6 @@
 				compatible = "marvell,mpic";
 				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 				#interrupt-cells = <1>;
-				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
 				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -618,6 +631,18 @@
 				status = "disabled";
 			};
 
+			audio_controller: audio-controller@e8000 {
+				#sound-dai-cells = <1>;
+				compatible = "marvell,armada-380-audio";
+				reg = <0xe8000 0x4000>, <0x18410 0xc>,
+				      <0x18204 0x4>;
+				reg-names = "i2s_regs", "pll_regs", "soc_ctrl";
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 0>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
 			usb3_0: usb3@f0000 {
 				compatible = "marvell,armada-380-xhci";
 				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/marvell/armada-390-db.dts
index 792d0a0184e8..20f518dbac97 100644
--- a/arch/arm/boot/dts/armada-390-db.dts
+++ b/arch/arm/boot/dts/marvell/armada-390-db.dts
@@ -81,7 +81,7 @@
 	pinctrl-0 = <&spi1_pins>;
 	pinctrl-names = "default";
 
-	flash@1 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "n25q128a13",
diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/marvell/armada-390.dtsi
index aa2057d4d6f8..aa2057d4d6f8 100644
--- a/arch/arm/boot/dts/armada-390.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-390.dtsi
diff --git a/arch/arm/boot/dts/armada-395-gp.dts b/arch/arm/boot/dts/marvell/armada-395-gp.dts
index 6dd9e9077f84..6dd9e9077f84 100644
--- a/arch/arm/boot/dts/armada-395-gp.dts
+++ b/arch/arm/boot/dts/marvell/armada-395-gp.dts
diff --git a/arch/arm/boot/dts/armada-395.dtsi b/arch/arm/boot/dts/marvell/armada-395.dtsi
index e18a7d9cd7d4..e18a7d9cd7d4 100644
--- a/arch/arm/boot/dts/armada-395.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-395.dtsi
diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/marvell/armada-398-db.dts
index ec6cdbeedde7..ec6cdbeedde7 100644
--- a/arch/arm/boot/dts/armada-398-db.dts
+++ b/arch/arm/boot/dts/marvell/armada-398-db.dts
diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/marvell/armada-398.dtsi
index c5ac89399ce1..c5ac89399ce1 100644
--- a/arch/arm/boot/dts/armada-398.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-398.dtsi
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/marvell/armada-39x.dtsi
index e0b7c2099831..6d05835efb42 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-39x.dtsi
@@ -268,7 +268,6 @@
 				compatible = "marvell,mpic";
 				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 				#interrupt-cells = <1>;
-				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
 				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -438,54 +437,84 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/*
@@ -494,20 +523,30 @@
 			 */
 			pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <3>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/marvell/armada-xp-98dx3236.dtsi
index 38a052a0312d..7a7e2066c498 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-xp-98dx3236.dtsi
@@ -76,16 +76,26 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
@@ -286,6 +296,7 @@
 	compatible = "marvell,armada-xp-wdt";
 	clocks = <&coreclk 2>, <&refclk>;
 	clock-names = "nbclk", "fixed";
+	interrupts = <93>, <38>;
 };
 
 &cpurst {
diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/marvell/armada-xp-98dx3336.dtsi
index 1d9d8a8ea60c..1d9d8a8ea60c 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-xp-98dx3336.dtsi
diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/marvell/armada-xp-98dx4251.dtsi
index 48ffdc72bfc7..48ffdc72bfc7 100644
--- a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-xp-98dx4251.dtsi
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/marvell/armada-xp-axpwifiap.dts
index 5a74197be0ad..5a74197be0ad 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-axpwifiap.dts
diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s-bit.dts
index c28e140b4afc..c28e140b4afc 100644
--- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s-bit.dts
diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dts
index 010b83b54212..010b83b54212 100644
--- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dts
diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dtsi
index 47b003a81bd4..47b003a81bd4 100644
--- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dtsi
diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s-bit.dts
index 20ba5c823bb2..20ba5c823bb2 100644
--- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s-bit.dts
diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dts
index 83aef43f66d5..83aef43f66d5 100644
--- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dts
diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dtsi
index cab99d8e2911..cab99d8e2911 100644
--- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dtsi
diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s-bit.dts
index 2caa3980fdf6..2caa3980fdf6 100644
--- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s-bit.dts
diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dts
index 665757f6e18e..665757f6e18e 100644
--- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dts
diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dtsi
index 7028482ce4b2..7028482ce4b2 100644
--- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dtsi
diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/marvell/armada-xp-db-dxbc2.dts
index 02bef8dc4270..02bef8dc4270 100644
--- a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-db-dxbc2.dts
diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/marvell/armada-xp-db-xc3-24g4xg.dts
index d1b61dad0c46..d1b61dad0c46 100644
--- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-db-xc3-24g4xg.dts
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/marvell/armada-xp-db.dts
index 75318fd0fc11..75318fd0fc11 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-db.dts
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/marvell/armada-xp-gp.dts
index d1d348b91c0a..d1d348b91c0a 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-gp.dts
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/marvell/armada-xp-lenovo-ix4-300d.dts
index 87dcb502f72d..21b95578fe95 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-lenovo-ix4-300d.dts
@@ -164,11 +164,11 @@
 		};
 	};
 
-	spi3 {
+	spi-3 {
 		compatible = "spi-gpio";
 		status = "okay";
-		gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>;
-		gpio-mosi = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/
+		sck-gpios  = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		mosi-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/
 		cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
index 622ac40dd164..ea859f7ea042 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
@@ -195,7 +195,7 @@
 		pinctrl-0 = <&power_led_pin>;
 		pinctrl-names = "default";
 
-		power {
+		led-power {
 			label = "mamba:white:power";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -265,44 +265,42 @@
 &mdio {
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan4";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan3";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "internet";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0>;
 				fixed-link {
 					speed = <1000>;
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/marvell/armada-xp-matrix.dts
index 1395cea12759..1395cea12759 100644
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-matrix.dts
diff --git a/arch/arm/boot/dts/marvell/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/marvell/armada-xp-mv78230.dtsi
new file mode 100644
index 000000000000..5ea9d509cd30
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-mv78230.dtsi
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada XP MV78230 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78230 SoC";
+	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x1 only.
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie5: pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>;
+				clocks = <&coreclk 0>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78230-pinctrl";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/marvell/armada-xp-mv78260.dtsi
new file mode 100644
index 000000000000..6c6fbb9faf5a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-mv78260.dtsi
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada XP MV78260 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78260 SoC";
+	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x4 only.
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie5: pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie6: pcie@6,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 63>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie6_intc 0>,
+						<0 0 0 2 &pcie6_intc 1>,
+						<0 0 0 3 &pcie6_intc 2>,
+						<0 0 0 4 &pcie6_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+
+				pcie6_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie7: pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 64>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie7_intc 0>,
+						<0 0 0 2 &pcie7_intc 1>,
+						<0 0 0 3 &pcie7_intc 2>,
+						<0 0 0 4 &pcie7_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+
+				pcie7_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie8: pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 65>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie8_intc 0>,
+						<0 0 0 2 &pcie8_intc 1>,
+						<0 0 0 3 &pcie8_intc 2>,
+						<0 0 0 4 &pcie8_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+
+				pcie8_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie9: pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 99>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie9_intc 0>,
+						<0 0 0 2 &pcie9_intc 1>,
+						<0 0 0 3 &pcie9_intc 2>,
+						<0 0 0 4 &pcie9_intc 3>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+
+				pcie9_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <91>;
+			};
+
+			eth3: ethernet@34000 {
+				compatible = "marvell,armada-xp-neta";
+				reg = <0x34000 0x4000>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78260-pinctrl";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/marvell/armada-xp-mv78460.dtsi
new file mode 100644
index 000000000000..16185edf9aa5
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-mv78460.dtsi
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada XP MV78460 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78460 SoC";
+	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <2>;
+			clocks = <&cpuclk 2>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <3>;
+			clocks = <&cpuclk 3>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. Two units are
+		 * x4/x1.
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
+
+				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie5: pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie6: pcie@6,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 63>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie6_intc 0>,
+						<0 0 0 2 &pcie6_intc 1>,
+						<0 0 0 3 &pcie6_intc 2>,
+						<0 0 0 4 &pcie6_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+
+				pcie6_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie7: pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 64>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie7_intc 0>,
+						<0 0 0 2 &pcie7_intc 1>,
+						<0 0 0 3 &pcie7_intc 2>,
+						<0 0 0 4 &pcie7_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+
+				pcie7_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie8: pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 65>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie8_intc 0>,
+						<0 0 0 2 &pcie8_intc 1>,
+						<0 0 0 3 &pcie8_intc 2>,
+						<0 0 0 4 &pcie8_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+
+				pcie8_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie9: pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 99>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie9_intc 0>,
+						<0 0 0 2 &pcie9_intc 1>,
+						<0 0 0 3 &pcie9_intc 2>,
+						<0 0 0 4 &pcie9_intc 3>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+
+				pcie9_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie10: pcie@a,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
+				reg = <0x5000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 103>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie10_intc 0>,
+						<0 0 0 2 &pcie10_intc 1>,
+						<0 0 0 3 &pcie10_intc 2>,
+						<0 0 0 4 &pcie10_intc 3>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 27>;
+				status = "disabled";
+
+				pcie10_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <91>;
+			};
+
+			eth3: ethernet@34000 {
+				compatible = "marvell,armada-xp-neta";
+				reg = <0x34000 0x4000>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78460-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/marvell/armada-xp-netgear-rn2120.dts
index 8ea73587db81..31933f81144e 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-netgear-rn2120.dts
@@ -121,11 +121,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/marvell/armada-xp-openblocks-ax3-4.dts
index 1ecf72a61bca..1ecf72a61bca 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-openblocks-ax3-4.dts
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/marvell/armada-xp-synology-ds414.dts
index 5551bac1962c..1b65059794bf 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-synology-ds414.dts
@@ -109,65 +109,60 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin
-			     &sata3_pwr_pin &sata4_pwr_pin>;
+	sata1_regulator: sata1-regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <2000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sata1_pwr_pin>;
 		pinctrl-names = "default";
+	};
 
-		sata1_regulator: sata1-regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <2000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata2_regulator: sata2-regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA2 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <4000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
+	sata2_regulator: sata2-regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA2 Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <4000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sata2_pwr_pin>;
+		pinctrl-names = "default";
+	};
 
-		sata3_regulator: sata3-regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "SATA3 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <6000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
+	sata3_regulator: sata3-regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA3 Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <6000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sata3_pwr_pin>;
+		pinctrl-names = "default";
+	};
 
-		sata4_regulator: sata4-regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "SATA4 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <8000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
+	sata4_regulator: sata4-regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA4 Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <8000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sata4_pwr_pin>;
+		pinctrl-names = "default";
 	};
 };
 
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/marvell/armada-xp.dtsi
index 6c19984d668e..4297482da62f 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-xp.dtsi
@@ -260,6 +260,7 @@
 	compatible = "marvell,armada-xp-wdt";
 	clocks = <&coreclk 2>, <&refclk>;
 	clock-names = "nbclk", "fixed";
+	interrupts = <93>, <38>;
 };
 
 &cpurst {
diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
index 9b9dfbe07be4..621cb145a8f6 100644
--- a/arch/arm/boot/dts/dove-cm-a510.dtsi
+++ b/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
@@ -101,32 +101,34 @@
 		pinctrl-0 = <&pmx_nand_gpo>;
 		pinctrl-names = "default";
 
-		system {
+		led-system {
 			label = "cm-a510:system:green";
 			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wifi_power: regulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "WiFi Power";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
-		};
+	wifi_power: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "WiFi Power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
 	};
 };
 
 /* Optional RTL8211D GbE PHY on SMI address 0x03 */
-&ethphy {
-	reg = <3>;
-	status = "disabled";
+&mdio {
+	ethphy: ethernet-phy@3 {
+		reg = <3>;
+		status = "disabled";
+	};
+};
+
+&eth {
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
 };
 
 &i2c0 {
diff --git a/arch/arm/boot/dts/dove-cubox-es.dts b/arch/arm/boot/dts/marvell/dove-cubox-es.dts
index ad361ec1361d..ad361ec1361d 100644
--- a/arch/arm/boot/dts/dove-cubox-es.dts
+++ b/arch/arm/boot/dts/marvell/dove-cubox-es.dts
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/marvell/dove-cubox.dts
index 2639b9fe0ab4..bcaaf8320c45 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/marvell/dove-cubox.dts
@@ -21,31 +21,24 @@
 		pinctrl-0 = <&pmx_gpio_18>;
 		pinctrl-names = "default";
 
-		power {
+		led-power {
 			label = "Power";
 			gpios = <&gpio0 18 1>;
 			default-state = "keep";
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 1 0>;
-			pinctrl-0 = <&pmx_gpio_1>;
-			pinctrl-names = "default";
-		};
+	usb_power: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 1 0>;
+		pinctrl-0 = <&pmx_gpio_1>;
+		pinctrl-names = "default";
 	};
 
 	clocks {
@@ -72,11 +65,18 @@
 &uart0 { status = "okay"; };
 &sata0 { status = "okay"; };
 &mdio { status = "okay"; };
-&eth { status = "okay"; };
+&eth {
+	status = "okay";
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
 
-&ethphy {
-	compatible = "marvell,88e1310";
-	reg = <1>;
+&mdio {
+	ethphy: ethernet-phy@1 {
+		compatible = "marvell,88e1310";
+		reg = <1>;
+	};
 };
 
 &gpu {
@@ -101,7 +101,7 @@
 		/* connect xtal input as source of pll0 and pll1 */
 		silabs,pll-source = <0 0>, <1 0>;
 
-		clkout0 {
+		clkout@0 {
 			reg = <0>;
 			silabs,drive-strength = <8>;
 			silabs,multisynth-source = <0>;
@@ -109,7 +109,7 @@
 			silabs,pll-master;
 		};
 
-		clkout2 {
+		clkout@2 {
 			reg = <2>;
 			silabs,drive-strength = <8>;
 			silabs,multisynth-source = <1>;
diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/marvell/dove-d2plug.dts
index a0e8996c2ffd..79ee2b32409d 100644
--- a/arch/arm/boot/dts/dove-d2plug.dts
+++ b/arch/arm/boot/dts/marvell/dove-d2plug.dts
@@ -21,17 +21,17 @@
 		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
 		pinctrl-names = "default";
 
-		wlan-ap {
+		led-wlan-ap {
 			label = "wlan-ap";
 			gpios = <&gpio0 0 1>;
 		};
 
-		wlan-act {
+		led-wlan-act {
 			label = "wlan-act";
 			gpios = <&gpio0 1 1>;
 		};
 
-		bluetooth-act {
+		led-bluetooth-act {
 			label = "bt-act";
 			gpios = <&gpio0 2 1>;
 		};
diff --git a/arch/arm/boot/dts/marvell/dove-d3plug.dts b/arch/arm/boot/dts/marvell/dove-d3plug.dts
new file mode 100644
index 000000000000..a451fd576990
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/dove-d3plug.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "Globalscale D3Plug";
+	compatible = "globalscale,d3plug", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
+		pinctrl-names = "default";
+
+		led-wlan-act {
+			label = "wlan-act";
+			gpios = <&gpio0 0 1>;
+		};
+
+		led-wlan-ap {
+			label = "wlan-ap";
+			gpios = <&gpio0 1 1>;
+		};
+
+		led-status {
+			label = "status";
+			gpios = <&gpio0 2 1>;
+		};
+	};
+
+	usb_power: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 8 0>;
+		pinctrl-0 = <&pmx_gpio_8>;
+		pinctrl-names = "default";
+	};
+};
+
+&uart0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+/* Samsung M8G2F eMMC */
+&sdio0 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+/* Marvell SD8787 WLAN/BT */
+&sdio1 {
+	status = "okay";
+	non-removable;
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 2M Flash Macronix MX25L1605D */
+	flash@0 {
+		compatible = "st,m25l1605d";
+		spi-max-frequency = <86000000>;
+		reg = <0>;
+	};
+};
+
+&pcie {
+	status = "okay";
+	/* Fresco Logic USB3.0 xHCI controller */
+	pcie@1 {
+		status = "okay";
+		reset-gpios = <&gpio0 26 1>;
+		reset-delay-us = <20000>;
+		pinctrl-0 = <&pmx_camera_gpio>;
+		pinctrl-names = "default";
+	};
+	/* Mini-PCIe slot */
+	pcie@2 {
+		status = "okay";
+		reset-gpios = <&gpio0 25 1>;
+	};
+};
diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/marvell/dove-dove-db.dts
index c1912dc6bfc3..c1912dc6bfc3 100644
--- a/arch/arm/boot/dts/dove-dove-db.dts
+++ b/arch/arm/boot/dts/marvell/dove-dove-db.dts
diff --git a/arch/arm/boot/dts/dove-sbc-a510.dts b/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
index df021f9b0117..8585ee5533bf 100644
--- a/arch/arm/boot/dts/dove-sbc-a510.dts
+++ b/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
@@ -76,22 +76,20 @@
 		stdout-path = &uart0;
 	};
 
-	regulators {
-		usb0_power: regulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		mmc_power: regulator@3 {
-			compatible = "regulator-fixed";
-			regulator-name = "MMC Power";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
-		};
+	usb0_power: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	mmc_power: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC Power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/marvell/dove.dtsi
index 89e0bdaf3a85..062c86361640 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/marvell/dove.dtsi
@@ -122,14 +122,24 @@
 				bus-range = <0x00 0xff>;
 
 				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 16>;
+				interrupt-names = "intx", "error";
+				interrupts = <16>, <15>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie1: pcie@2 {
 				device_type = "pci";
 				status = "disabled";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				clocks = <&gate_clk 5>;
 				marvell,pcie-port = <1>;
@@ -141,8 +151,18 @@
 				bus-range = <0x00 0xff>;
 
 				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 18>;
+				interrupt-names = "intx", "error";
+				interrupts = <18>, <17>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
@@ -362,7 +382,6 @@
 					interrupts = <29>;
 					/* overwrite MAC address in bootloader */
 					local-mac-address = [00 00 00 00 00 00];
-					phy-handle = <&ethphy>;
 				};
 			};
 
@@ -374,10 +393,6 @@
 				interrupts = <30>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
-
-				ethphy: ethernet-phy {
-					/* set phy address in board file */
-				};
 			};
 
 			sdio0: sdio-host@92000 {
@@ -407,7 +422,7 @@
 				clocks = <&gate_clk 3>;
 				clock-names = "sata";
 				#phy-cells = <0>;
-				status = "ok";
+				status = "okay";
 			};
 
 			audio0: audio-controller@b0000 {
diff --git a/arch/arm/boot/dts/marvell/kirkwood-4i-edge-200.dts b/arch/arm/boot/dts/marvell/kirkwood-4i-edge-200.dts
new file mode 100644
index 000000000000..b1749d3f60b7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-4i-edge-200.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Endian 4i Edge 200 Board Description
+ * Note: Endian UTM Mini is hardware clone of Endian Edge 200
+ * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Endian 4i Edge 200";
+	compatible = "endian,4i-edge-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led>;
+		pinctrl-names = "default";
+
+		led-1 {
+			function = LED_FUNCTION_SD;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth0port {
+	speed = <1000>;
+	duplex = <1>;
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&eth1port {
+	phy-handle = <&ethphyb>;
+};
+
+&mdio {
+	status = "okay";
+
+	ethphyb: ethernet-phy@b {
+		reg = <0x0b>;
+
+		marvell,reg-init =
+			/* link-activity, bi-color mode 4 */
+			<3 0x10 0xfff0 0xf>; /* Reg 3,16 <- 0xzzzf */
+	};
+
+	switch0: switch@11 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x11>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "port1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "port2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "port3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "port4";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-id";
+				ethernet = <&eth0port>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x00000000 0x000a0000>;
+		read-only;
+	};
+
+	partition@a0000 {
+		label = "u-boot-env";
+		reg = <0x000a0000 0x00060000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "kernel";
+		reg = <0x00100000 0x00400000>;
+	};
+
+	partition@500000 {
+		label = "ubi";
+		reg = <0x00500000 0x1fb00000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_sysrst>;
+	pinctrl-names = "default";
+
+	pmx_sysrst: pmx-sysrst {
+		marvell,pins = "mpp6";
+		marvell,function = "sysrst";
+	};
+
+	pmx_sdio_cd: pmx-sdio-cd {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	pmx_led: pmx-led {
+		marvell,pins = "mpp34", "mpp35", "mpp49";
+		marvell,function = "gpio";
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata_phy0 {
+	status = "disabled";
+};
+
+&sata_phy1 {
+	status = "disabled";
+};
+
+&sdio {
+	pinctrl-0 = <&pmx_sdio_cd>;
+	pinctrl-names = "default";
+	status = "okay";
+	cd-gpios = <&gpio0 28 9>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/marvell/kirkwood-6192.dtsi
index 396bcba08adb..705c0d7effed 100644
--- a/arch/arm/boot/dts/kirkwood-6192.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-6192.dtsi
@@ -26,12 +26,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc 0>,
+						<0 0 0 2 &pcie_intc 1>,
+						<0 0 0 3 &pcie_intc 2>,
+						<0 0 0 4 &pcie_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/marvell/kirkwood-6281.dtsi
index faa05849a40d..8e311165fd13 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-6281.dtsi
@@ -26,12 +26,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc 0>,
+						<0 0 0 2 &pcie_intc 1>,
+						<0 0 0 3 &pcie_intc 2>,
+						<0 0 0 4 &pcie_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/marvell/kirkwood-6282.dtsi
index e84c54b77dea..e33723160ce7 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-6282.dtsi
@@ -30,12 +30,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie1: pcie@2,0 {
@@ -48,12 +58,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 10>;
+				interrupt-names = "intx", "error";
+				interrupts = <10>, <45>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 18>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/marvell/kirkwood-98dx4122.dtsi
index 299c147298c3..c3469a2fc58a 100644
--- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-98dx4122.dtsi
@@ -26,12 +26,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc 0>,
+						<0 0 0 2 &pcie_intc 1>,
+						<0 0 0 3 &pcie_intc 2>,
+						<0 0 0 4 &pcie_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/marvell/kirkwood-b3.dts
index a7636fe28501..681343c1357a 100644
--- a/arch/arm/boot/dts/kirkwood-b3.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-b3.dts
@@ -187,7 +187,7 @@
 
 /* Wifi model has Atheros chipset on pcie port */
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
index 07fbfca444d5..36b90c632fd6 100644
--- a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
@@ -35,13 +35,13 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		button {
+		button-power {
 			label = "Power";
 			linux,code = <KEY_SLEEP>;
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
@@ -51,7 +51,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue-power {
+		led-blue-power {
 			label = "nas220:blue:power";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
diff --git a/arch/arm/boot/dts/kirkwood-c200-v1.dts b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
index f59ff7578dfc..7e3ee64d4bdf 100644
--- a/arch/arm/boot/dts/kirkwood-c200-v1.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
@@ -29,25 +29,25 @@
 		pinctrl-0 = <&pmx_buttons>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
 		};
 
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb1 {
+		button-usb1 {
 			label = "USB1 Button";
 			linux,code = <BTN_0>;
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		button-usb2 {
 			label = "USB2 Button";
 			linux,code = <BTN_1>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
index 448b0cd23b5f..151edcd140a0 100644
--- a/arch/arm/boot/dts/kirkwood-cloudbox.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
@@ -58,10 +58,8 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		key-power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
@@ -71,11 +69,11 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-fail {
+		led-red-fail {
 			label = "cloudbox:red:fail";
 			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 		};
-		blue-sata {
+		led-blue-sata {
 			label = "cloudbox:blue:sata";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-d2net.dts b/arch/arm/boot/dts/marvell/kirkwood-d2net.dts
index bd3b266dd766..fcce8730d3e3 100644
--- a/arch/arm/boot/dts/kirkwood-d2net.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-d2net.dts
@@ -37,7 +37,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-fail {
+		led-red-fail {
 			label = "d2net_v2:red:fail";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/marvell/kirkwood-db-88f6281.dts
index 2adb17c955aa..a9a8e6b744c7 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-db-88f6281.dts
@@ -18,7 +18,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/marvell/kirkwood-db-88f6282.dts
index f84a48539917..6dc6579d4524 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-db-88f6282.dts
@@ -18,7 +18,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/marvell/kirkwood-db.dtsi
index 6fe2e31534af..8bacaeb4f4bd 100644
--- a/arch/arm/boot/dts/kirkwood-db.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-db.dtsi
@@ -39,7 +39,7 @@
 			status = "okay";
 		};
 
-		ehci@50000 {
+		usb@50000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
index c32300611d2c..36394d1ab3e2 100644
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
@@ -129,7 +129,7 @@
 			status = "okay";
 		};
 
-		ehci@50000 {
+		usb@50000 {
 			status = "okay";
 		};
 	};
@@ -137,38 +137,38 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue-usb {
+		led-blue-usb {
 			label = "dir665:blue:usb";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		blue-internet {
+		led-blue-internet {
 			/* Can only be turned on if the Internet
 			 * Ethernet port has Link
 			 */
 			label = "dir665:blue:internet";
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
-		amber-internet {
+		led-amber-internet {
 			label = "dir665:amber:internet";
 			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		};
-		blue-wifi5g {
+		led-blue-wifi5g {
 			label = "dir665:blue:5g";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 		};
-		blue-status {
+		led-blue-status {
 			label = "dir665:blue:status";
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		};
-		blue-wps {
+		led-blue-wps {
 			label = "dir665:blue:wps";
 			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		};
-		amber-status {
+		led-amber-status {
 			label = "dir665:amber:status";
 			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
 		};
-		blue-24g {
+		led-blue-24g {
 			label = "dir665:blue:24g";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
@@ -176,15 +176,13 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		reset {
+		button-reset {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
@@ -211,18 +209,18 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan3";
+				reg = <1>;
+				label = "lan3";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan2";
+				reg = <2>;
+				label = "lan2";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "lan1";
+				reg = <3>;
+				label = "lan1";
 			};
 
 			port@4 {
@@ -232,7 +230,7 @@
 
 			port@6 {
 				reg = <6>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -251,6 +249,7 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
@@ -268,7 +267,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/marvell/kirkwood-dns320.dts
index d6b0f418fd01..d8279e0c4c4f 100644
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dns320.dts
@@ -24,24 +24,24 @@
 			     &pmx_led_white_usb>;
 		pinctrl-names = "default";
 
-		blue-power {
+		led-blue-power {
 			label = "dns320:blue:power";
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		blue-usb {
+		led-blue-usb {
 			label = "dns320:blue:usb";
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-		orange-l_hdd {
+		led-orange-l_hdd {
 			label = "dns320:orange:l_hdd";
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
-		orange-r_hdd {
+		led-orange-r_hdd {
 			label = "dns320:orange:r_hdd";
 			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
 		};
-		orange-usb {
+		led-orange-usb {
 			label = "dns320:orange:usb";
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */
 		};
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/marvell/kirkwood-dns325.dts
index 94d9c06cbbf5..7f396195e977 100644
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dns325.dts
@@ -24,24 +24,24 @@
 			     &pmx_led_white_usb>;
 		pinctrl-names = "default";
 
-		white-power {
+		led-white-power {
 			label = "dns325:white:power";
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		white-usb {
+		led-white-usb {
 			label = "dns325:white:usb";
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */
 		};
-		red-l_hdd {
+		led-red-l_hdd {
 			label = "dns325:red:l_hdd";
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
-		red-r_hdd {
+		led-red-r_hdd {
 			label = "dns325:red:r_hdd";
 			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
 		};
-		red-usb {
+		led-red-usb {
 			label = "dns325:red:usb";
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
index eb917462b219..20bcd031f3f5 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
@@ -8,23 +8,21 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_power &pmx_button_unmount
 			     &pmx_button_reset>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 		};
-		eject {
+		button-eject {
 			label = "USB unmount button";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
@@ -38,9 +36,9 @@
 		pinctrl-names = "default";
 		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
 			 &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0    0
-				      3000 1
-				      6000 2>;
+		gpio-fan,speed-map = <0    0>,
+				     <3000 1>,
+				     <6000 2>;
 	};
 
 	gpio_poweroff {
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts
index 264938dfa4d9..090f1e2e5bb6 100644
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts
@@ -42,12 +42,12 @@
 		pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "status:green:health";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		fault {
+		led-fault {
 			label = "status:orange:fault";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts
index 328516351e84..590bee3c561c 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts
@@ -85,15 +85,15 @@
 			     &pmx_led_wifi_ap >;
 		pinctrl-names = "default";
 
-		bluetooth {
+		led-bluetooth {
 			label = "dreamplug:blue:bluetooth";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		wifi {
+		led-wifi {
 			label = "dreamplug:green:wifi";
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 		};
-		wifi-ap {
+		led-wifi-ap {
 			label = "dreamplug:green:wifi_ap";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-ds109.dts b/arch/arm/boot/dts/marvell/kirkwood-ds109.dts
index 29982e7acb7f..29982e7acb7f 100644
--- a/arch/arm/boot/dts/kirkwood-ds109.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds109.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds110jv10.dts b/arch/arm/boot/dts/marvell/kirkwood-ds110jv10.dts
index d68c616e9309..d68c616e9309 100644
--- a/arch/arm/boot/dts/kirkwood-ds110jv10.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds110jv10.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/marvell/kirkwood-ds111.dts
index e1420cbcd7e4..e1420cbcd7e4 100644
--- a/arch/arm/boot/dts/kirkwood-ds111.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds111.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/marvell/kirkwood-ds112.dts
index f48609e95afe..3912f1b525b6 100644
--- a/arch/arm/boot/dts/kirkwood-ds112.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds112.dts
@@ -43,7 +43,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie1 {
diff --git a/arch/arm/boot/dts/kirkwood-ds209.dts b/arch/arm/boot/dts/marvell/kirkwood-ds209.dts
index f41fe95e055f..f41fe95e055f 100644
--- a/arch/arm/boot/dts/kirkwood-ds209.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds209.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds210.dts b/arch/arm/boot/dts/marvell/kirkwood-ds210.dts
index 729f959a7838..729f959a7838 100644
--- a/arch/arm/boot/dts/kirkwood-ds210.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds210.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/marvell/kirkwood-ds212.dts
index 416bab50d170..416bab50d170 100644
--- a/arch/arm/boot/dts/kirkwood-ds212.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds212.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds212j.dts b/arch/arm/boot/dts/marvell/kirkwood-ds212j.dts
index 14cf4d8afaf3..14cf4d8afaf3 100644
--- a/arch/arm/boot/dts/kirkwood-ds212j.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds212j.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds409.dts b/arch/arm/boot/dts/marvell/kirkwood-ds409.dts
index a8650f9e3eb7..a8650f9e3eb7 100644
--- a/arch/arm/boot/dts/kirkwood-ds409.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds409.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds409slim.dts b/arch/arm/boot/dts/marvell/kirkwood-ds409slim.dts
index 27a1d840bd15..27a1d840bd15 100644
--- a/arch/arm/boot/dts/kirkwood-ds409slim.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds409slim.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/marvell/kirkwood-ds411.dts
index 86907be70cf9..1d4256ef325d 100644
--- a/arch/arm/boot/dts/kirkwood-ds411.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds411.dts
@@ -47,7 +47,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie1 {
diff --git a/arch/arm/boot/dts/kirkwood-ds411j.dts b/arch/arm/boot/dts/marvell/kirkwood-ds411j.dts
index bb3200daea1e..bb3200daea1e 100644
--- a/arch/arm/boot/dts/kirkwood-ds411j.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds411j.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/marvell/kirkwood-ds411slim.dts
index 9c5364a4e0a8..9c5364a4e0a8 100644
--- a/arch/arm/boot/dts/kirkwood-ds411slim.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds411slim.dts
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts
index d4cb3cd3e2a2..d5ac4e3974da 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts
@@ -85,44 +85,44 @@
 			    >;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "status:green:health";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		fault {
+		led-fault {
 			label = "status:orange:fault";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		left0 {
+		led-left0 {
 			label = "status:white:left0";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		left1 {
+		led-left1 {
 			label = "status:white:left1";
 			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		};
-		left2 {
+		led-left2 {
 			label = "status:white:left2";
 			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		};
-		left3 {
+		led-left3 {
 			label = "status:white:left3";
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		};
-		right0 {
+		led-right0 {
 			label = "status:white:right0";
 			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 		};
-		right1 {
+		led-right1 {
 			label = "status:white:right1";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		right2 {
+		led-right2 {
 			label = "status:white:right2";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
-		right3 {
+		led-right3 {
 			label = "status:white:right3";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts
index dfb41393941d..d5aa8b505cc0 100644
--- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts
@@ -59,19 +59,19 @@
 			      &pmx_led_wmode_r &pmx_led_wmode_g >;
 		pinctrl-names = "default";
 
-		health-r {
+		led-health-r {
 			label = "guruplug:red:health";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
-		health-g {
+		led-health-g {
 			label = "guruplug:green:health";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		wmode-r {
+		led-wmode-r {
 			label = "guruplug:red:wmode";
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 		};
-		wmode-g {
+		led-wmode-g {
 			label = "guruplug:green:wmode";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
index 962a910a6f5c..018c6b8f3e8a 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
@@ -58,17 +58,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
@@ -81,16 +79,16 @@
 			     &pmx_led_usb_transfer>;
 		pinctrl-names = "default";
 
-		green-os {
+		led-green-os {
 			label = "ib62x0:green:os";
 			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
-		red-os {
+		led-red-os {
 			label = "ib62x0:red:os";
 			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
 		};
-		usb-copy {
+		led-usb-copy {
 			label = "ib62x0:red:usb_copy";
 			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
index 95af7aa1fdcb..91b46e77e0b6 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
@@ -89,32 +89,32 @@
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
-		power-blue {
+		led-power-blue {
 			label = "power:blue";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
-		power-red {
+		led-power-red {
 			label = "power:red";
 			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		};
-		usb1 {
+		led-usb1 {
 			label = "usb1:blue";
 			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		};
-		usb2 {
+		led-usb2 {
 			label = "usb2:blue";
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		};
-		usb3 {
+		led-usb3 {
 			label = "usb3:blue";
 			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 		};
-		usb4 {
+		led-usb4 {
 			label = "usb4:blue";
 			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		};
-		otb {
+		led-otb {
 			label = "otb:blue";
 			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
 		};
@@ -122,18 +122,16 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
 		pinctrl-names = "default";
 
-		otb {
+		button-otb {
 			label = "OTB Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
@@ -187,7 +185,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
index 2338f495d517..039362152650 100644
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
@@ -127,44 +127,42 @@
 			      &pmx_led_rebuild &pmx_led_health >;
 		pinctrl-names = "default";
 
-		power_led {
+		led-power-led {
 			label = "status:white:power_led";
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
-		rebuild_led {
+		led-rebuild-led {
 			label = "status:white:rebuild_led";
 			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 		};
-		health_led {
+		led-health-led {
 			label = "status:red:health_led";
 			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 		};
-		backup_led {
+		led-backup-led {
 			label = "status:blue:backup_led";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
 	};
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_reset &pmx_button_power
 			     &pmx_button_otb>;
 		pinctrl-names = "default";
 
 
-		Power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 		};
-		Reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 		};
-		OTB {
+		button-otb {
 			label = "OTB Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/marvell/kirkwood-is2.dts
index 1bc16a5cdbaa..1bc16a5cdbaa 100644
--- a/arch/arm/boot/dts/kirkwood-is2.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-is2.dts
diff --git a/arch/arm/boot/dts/kirkwood-km_common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-km_common.dtsi
index 75dc83914f56..259cb3d5f16d 100644
--- a/arch/arm/boot/dts/kirkwood-km_common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-km_common.dtsi
@@ -27,8 +27,8 @@
 
 	i2c {
 		compatible = "i2c-gpio";
-		gpios = < &gpio0 8 GPIO_ACTIVE_HIGH		/* sda */
-			  &gpio0 9 GPIO_ACTIVE_HIGH>;		/* scl */
+		sda-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	};
 };
@@ -39,7 +39,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-km_fixedeth.dts b/arch/arm/boot/dts/marvell/kirkwood-km_fixedeth.dts
index 515be7bccc0a..515be7bccc0a 100644
--- a/arch/arm/boot/dts/kirkwood-km_fixedeth.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-km_fixedeth.dts
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/marvell/kirkwood-km_kirkwood.dts
index f035eff1c111..f035eff1c111 100644
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-km_kirkwood.dts
diff --git a/arch/arm/boot/dts/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
index 0d81c43a6a73..974bc9de4702 100644
--- a/arch/arm/boot/dts/kirkwood-l-50.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
@@ -62,9 +62,10 @@
 			status = "okay";
 			clock-frequency = <400000>;
 
-			gpio2: gpio-expander@20{
+			gpio2: gpio-expander@20 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x20>;
 
@@ -76,9 +77,10 @@
 			 * 5: mPCIE reset (active low)
 			 * 6: Express card reset (active low)
 			 */
-			gpio3: gpio-expander@21{
+			gpio3: gpio-expander@21 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x21>;
 
@@ -95,52 +97,52 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status_green {
+		led-status-green {
 			label = "l-50:green:status";
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};
 
-		status_red {
+		led-status-red {
 			label = "l-50:red:status";
 			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
 		};
 
-		wifi {
+		led-wifi {
 			label = "l-50:green:wifi";
 			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "phy0tpt";
 		};
 
-		internet_green {
+		led-internet-green {
 			label = "l-50:green:internet";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 		};
 
-		internet_red {
+		led-internet-red {
 			label = "l-50:red:internet";
 			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 		};
 
-		usb1_green {
+		led-usb1-green {
 			label = "l-50:green:usb1";
 			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "usbport";
 			trigger-sources = <&hub_port3>;
 		};
 
-		usb1_red {
+		led-usb1-red {
 			label = "l-50:red:usb1";
 			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2_green {
+		led-usb2-green {
 			label = "l-50:green:usb2";
 			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "usbport";
 			trigger-sources = <&hub_port1>;
 		};
 
-		usb2_red {
+		led-usb2-red {
 			label = "l-50:red:usb2";
 			gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
 		};
@@ -191,7 +193,7 @@
 	keys {
 		compatible = "gpio-keys";
 
-		factory_defaults {
+		button-factory-defaults {
 			label = "factory_defaults";
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
@@ -223,18 +225,18 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan1";
+				reg = <1>;
+				label = "lan1";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan6";
+				reg = <2>;
+				label = "lan6";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "lan2";
+				reg = <3>;
+				label = "lan2";
 			};
 
 			port@4 {
@@ -254,7 +256,6 @@
 
 			port@6 {
 				reg = <6>;
-				label = "cpu";
 				phy-mode = "rgmii-id";
 				ethernet = <&eth1port>;
 				fixed-link {
@@ -282,18 +283,18 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan8";
+				reg = <1>;
+				label = "lan8";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan4";
+				reg = <2>;
+				label = "lan4";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "dmz";
+				reg = <3>;
+				label = "dmz";
 			};
 
 			switch1port5: port@5 {
@@ -330,6 +331,7 @@
 	ethernet1-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts
index 6158214a939a..90ea6cdee8e0 100644
--- a/arch/arm/boot/dts/kirkwood-laplug.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts
@@ -51,7 +51,7 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		power {
+		button-power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
@@ -61,11 +61,11 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-fail {
+		led-red-fail {
 			label = "laplug_v2:red:power";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		blue-power {
+		led-blue-power {
 			label = "laplug_v2:blue:power";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
@@ -160,7 +160,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
index 377b6e970259..dfac2045a1eb 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
@@ -118,10 +118,11 @@
 		gpios = <&gpio0 17 GPIO_ACTIVE_LOW
 			 &gpio0 16 GPIO_ACTIVE_LOW>;
 
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
+		gpio-fan,speed-map =
+				<   0 3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 
 		alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation-duo-6281.dtsi
index ba629e02ba31..ba629e02ba31 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-duo-6281.dtsi
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsqvl.dts
index 8bb381088910..8bb381088910 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsqvl.dts
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsvl.dts
index 3f2a0bfe03ed..3f2a0bfe03ed 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsvl.dts
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswsxl.dts
index c42d0da38fe7..c42d0da38fe7 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswsxl.dts
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswvl.dts
index e0f62adc0d5d..e0f62adc0d5d 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswvl.dts
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
index c6024b569423..0425df8cb91c 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
@@ -69,10 +69,11 @@
 		gpios = <&gpio1 16 GPIO_ACTIVE_LOW
 			 &gpio1 15 GPIO_ACTIVE_LOW>;
 
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
+		gpio-fan,speed-map =
+				<   0 3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 
 		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi
index 407d6d8b3a7f..8a11d2b9d449 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi
@@ -88,8 +88,6 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_function &pmx_power_switch
 			     &pmx_power_auto_switch>;
 		pinctrl-names = "default";
@@ -156,7 +154,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
index 2f9660f3b457..8a1c38ab6111 100644
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
@@ -33,18 +33,16 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
 		pinctrl-names = "default";
 
-		wps {
+		button-wps {
 			label = "WPS Button";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
@@ -56,12 +54,12 @@
 		pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
 		pinctrl-names = "default";
 
-		white-health {
+		led-white-health {
 			label = "viper:white:health";
 			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		white-pulse {
+		led-white-pulse {
 			label = "viper:white:pulse";
 			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 		};
@@ -198,7 +196,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -221,6 +219,7 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/marvell/kirkwood-lschlv2.dts
index 1d737d903f5f..1d737d903f5f 100644
--- a/arch/arm/boot/dts/kirkwood-lschlv2.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-lschlv2.dts
diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/marvell/kirkwood-lsxhl.dts
index a56e0d797778..a56e0d797778 100644
--- a/arch/arm/boot/dts/kirkwood-lsxhl.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-lsxhl.dts
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
index 7b151acb9984..5e0b139dd4fb 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
@@ -10,6 +10,11 @@
 
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
+			/* Non-default UART pins */
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp4", "mpp5";
+			};
+
 			pmx_power_hdd: pmx-power-hdd {
 				marvell,pins = "mpp10";
 				marvell,function = "gpo";
@@ -102,24 +107,22 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_function &pmx_power_switch
 			     &pmx_power_auto_switch>;
 		pinctrl-names = "default";
 
-		option {
+		button-option {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 		};
-		reserved {
+		button-reserved {
 			label = "Power-on Switch";
 			linux,code = <KEY_RESERVED>;
 			linux,input-type = <5>;
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
-		power {
+		button-power {
 			label = "Power-auto Switch";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
@@ -134,28 +137,28 @@
 			     &pmx_led_function_blue>;
 		pinctrl-names = "default";
 
-		func_blue {
+		led-func-blue {
 			label = "lsxl:blue:func";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		};
 
-		alarm {
+		led-alarm {
 			label = "lsxl:red:alarm";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
 
-		info {
+		led-info {
 			label = "lsxl:amber:info";
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "lsxl:blue:power";
 			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
 
-		func_red {
+		led-func-red {
 			label = "lsxl:red:func";
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 		};
@@ -167,10 +170,11 @@
 		pinctrl-names = "default";
 		gpios = <&gpio0 19 GPIO_ACTIVE_LOW
 		         &gpio0 18 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map = <0    3
-		                      1500 2
-		                      3250 1
-		                      5000 0>;
+		gpio-fan,speed-map =
+				<0    3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -213,22 +217,11 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
 	ethphy1: ethernet-phy@8 {
 		reg = <8>;
 	};
 };
 
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
 &eth1 {
 	status = "okay";
 	ethernet1-port@0 {
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts
index b80d12f6aa49..6533b49a15b2 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts
@@ -8,10 +8,10 @@
 	model = "MPL CEC4";
 	compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
-        memory {
-                device_type = "memory";
-                reg = <0x00000000 0x20000000>;
-        };
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
@@ -66,8 +66,8 @@
 			};
 		};
 
-                i2c@11000 {
-                        status = "okay";
+		i2c@11000 {
+			status = "okay";
 
 			rtc@51 {
 				compatible = "nxp,pcf8563";
@@ -79,7 +79,7 @@
 				reg = <0x57>;
 			};
 
-                };
+		};
 
 		serial@12000 {
 			status = "okay";
@@ -114,36 +114,36 @@
 			    >;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "status:green:health";
 			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 		};
 
-		user1o {
+		led-user1o {
 			label = "user1:orange";
 			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		user1g {
+		led-user1g {
 			label = "user1:green";
 			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		user0o {
+		led-user0o {
 			label = "user0:orange";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		user0g {
+		led-user0g {
 			label = "user0:green";
 			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		misc {
+		led-misc {
 			label = "status:orange:misc";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 			default-state = "on";
@@ -208,7 +208,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
index 2e1a75348908..051579fc36b8 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
@@ -63,7 +63,7 @@
 			status = "okay";
 		};
 
-		ehci@50000 {
+		usb@50000 {
 			status = "okay";
 		};
 	};
@@ -73,17 +73,17 @@
 		pinctrl-0 = <&pmx_leds &pmx_usb_led>;
 		pinctrl-names = "default";
 
-		green-status {
+		led-green-status {
 			label = "gtw:green:Status";
 			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		red-status {
+		led-red-status {
 			label = "gtw:red:Status";
 			gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		green-usb {
+		led-green-usb {
 			label = "gtw:green:USB";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
@@ -91,17 +91,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_keys>;
 		pinctrl-names = "default";
 
-		restart {
+		button-restart {
 			label = "SWR Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		wps {
+		button-wps {
 			label = "WPS Button";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
@@ -149,7 +147,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -166,11 +164,12 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/marvell/kirkwood-nas2big.dts
index 6a2934b7d0ce..0b0a15093146 100644
--- a/arch/arm/boot/dts/kirkwood-nas2big.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nas2big.dts
@@ -131,7 +131,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-net2big.dts b/arch/arm/boot/dts/marvell/kirkwood-net2big.dts
index 3e3ac289e5b0..d5f6bb50ba11 100644
--- a/arch/arm/boot/dts/kirkwood-net2big.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-net2big.dts
@@ -46,11 +46,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/marvell/kirkwood-net5big.dts
index cba8a2b6f6d9..2497ad26b5b6 100644
--- a/arch/arm/boot/dts/kirkwood-net5big.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-net5big.dts
@@ -78,11 +78,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 
 	netxbig-leds {
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
index cb564c3bcdc4..cb564c3bcdc4 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_nv+_v2.dts
index b13aee570804..6cf76430cfab 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_nv+_v2.dts
@@ -78,11 +78,11 @@
 		};
 
 		clocks {
-		       g762_clk: g762-oscillator {
-				 compatible = "fixed-clock";
-				 #clock-cells = <0>;
-				 clock-frequency = <8192>;
-		       };
+			g762_clk: g762-oscillator {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <8192>;
+			};
 		};
 
 		i2c@11000 {
@@ -266,7 +266,7 @@
 
 /* Connected to NEC uPD720200 USB 3.0 controller */
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
index b5737026e244..d4edf2727388 100644
--- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
@@ -53,26 +53,24 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		/*
 		 * esc and power represent a three position rocker
 		 * switch. Thus the conventional KEY_POWER does not fit
 		 */
-		exc {
+		button-exc {
 			label = "Back power switch (on|auto)";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
 			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 		};
-		power {
+		button-power {
 			label = "Back power switch (auto|off)";
 			linux,code = <KEY_1>;
 			linux,input-type = <5>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
-		option {
+		button-option {
 			label = "Function button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
index 51530ea86622..d6b615cf6390 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
@@ -55,10 +55,8 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
@@ -68,7 +66,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-fail {
+		led-red-fail {
 			label = "ns2:red:fail";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2.dts
index 7b67083e1ec0..7b67083e1ec0 100644
--- a/arch/arm/boot/dts/kirkwood-ns2.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2.dts
diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts
index b0cb5907ed63..686bcd6f0f3c 100644
--- a/arch/arm/boot/dts/kirkwood-ns2lite.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts
@@ -24,7 +24,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue-sata {
+		led-blue-sata {
 			label = "ns2:blue:sata";
 			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "disk-activity";
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
index c0a087e77408..044958bc55da 100644
--- a/arch/arm/boot/dts/kirkwood-ns2max.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
@@ -29,15 +29,15 @@
 			 &gpio1  1 GPIO_ACTIVE_LOW
 			 &gpio0 23 GPIO_ACTIVE_LOW>;
 		gpio-fan,speed-map =
-			<   0  0
-			 1500 15
-			 1700 14
-			 1800 13
-			 2100 12
-			 3100 11
-			 3300 10
-			 4300  9
-			 5500  8>;
+			<   0  0>,
+			<1500 15>,
+			<1700 14>,
+			<1800 13>,
+			<2100 12>,
+			<3100 11>,
+			<3300 10>,
+			<4300  9>,
+			<5500  8>;
 		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 	};
 
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
index 5b9fa14b6428..3fbe008f9141 100644
--- a/arch/arm/boot/dts/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
@@ -30,15 +30,15 @@
 			 &gpio1  1 GPIO_ACTIVE_LOW
 			 &gpio0 23 GPIO_ACTIVE_LOW>;
 		gpio-fan,speed-map =
-			<   0  0
-			 3000 15
-			 3180 14
-			 4140 13
-			 4570 12
-			 6760 11
-			 7140 10
-			 7980  9
-			 9200  8>;
+			<   0  0>,
+			<3000 15>,
+			<3180 14>,
+			<4140 13>,
+			<4570 12>,
+			<6760 11>,
+			<7140 10>,
+			<7980  9>,
+			<9200  8>;
 		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 	};
 
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts
index 9b861c2e76c5..3555ac1c3b15 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts
@@ -87,43 +87,43 @@
 			     &pmx_led_hdd_green &pmx_led_hdd_red>;
 		pinctrl-names = "default";
 
-		green-sys {
+		led-green-sys {
 			label = "nsa310:green:sys";
 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 		};
-		red-sys {
+		led-red-sys {
 			label = "nsa310:red:sys";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd {
+		led-green-hdd {
 			label = "nsa310:green:hdd";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd {
+		led-red-hdd {
 			label = "nsa310:red:hdd";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		green-esata {
+		led-green-esata {
 			label = "nsa310:green:esata";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		red-esata {
+		led-red-esata {
 			label = "nsa310:red:esata";
 			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 		};
-		green-usb {
+		led-green-usb {
 			label = "nsa310:green:usb";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		red-usb {
+		led-red-usb {
 			label = "nsa310:red:usb";
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 		};
-		green-copy {
+		led-green-copy {
 			label = "nsa310:green:copy";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		red-copy {
+		led-red-copy {
 			label = "nsa310:red:copy";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
@@ -131,7 +131,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts
index b85e314f045a..ddf84092aade 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310a.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts
@@ -75,39 +75,39 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		green-sys {
+		led-green-sys {
 			label = "nsa310:green:sys";
 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 		};
-		red-sys {
+		led-red-sys {
 			label = "nsa310:red:sys";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd {
+		led-green-hdd {
 			label = "nsa310:green:hdd";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd {
+		led-red-hdd {
 			label = "nsa310:red:hdd";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		green-esata {
+		led-green-esata {
 			label = "nsa310:green:esata";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		red-esata {
+		led-red-esata {
 			label = "nsa310:red:esata";
 			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 		};
-		green-usb {
+		led-green-usb {
 			label = "nsa310:green:usb";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		green-copy {
+		led-green-copy {
 			label = "nsa310:green:copy";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		red-copy {
+		led-red-copy {
 			label = "nsa310:red:copy";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
new file mode 100644
index 000000000000..47deb93c90a5
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * ZyXEL NSA310S Board Description
+ * Copyright 2020-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
+ * Based upon the board setup file created by Peter Schildmann
+ */
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "ZyXEL NSA310S";
+	compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_pwr_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		button-power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-copy {
+			label = "Copy Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-1 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usb-host";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_DISK;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "ata1";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usb0_power: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	sata1_power: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 Power";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	thermal-zones {
+		disk-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&hdd_temp>;
+
+			trips {
+				disk_alert: disk-alert {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				disk_crit: disk-crit {
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "htk,ht1382";
+		reg = <0x68>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+		phy-mode = "rgmii-id";
+		marvell,reg-init = <0x1 0x16 0x0 0x3>,
+				   <0x1 0x10 0x0 0x1017>,
+				   <0x1 0x11 0x0 0x4408>,
+				   <0x1 0x16 0x0 0x0>;
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x00c0000>;
+		read-only;
+	};
+	partition@c0000 {
+		label = "uboot_env";
+		reg = <0x00c0000 0x0080000>;
+	};
+	partition@140000 {
+		label = "ubi";
+		reg = <0x0140000 0x7ec0000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp24", "mpp25", "mpp26";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp13", "mpp15", "mpp16", "mpp22", "mpp23",
+						"mpp28", "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_power: pmx-power {
+		marvell,pins = "mpp21", "mpp33";
+		marvell,function = "gpio";
+	};
+
+	pmx_pwr_off: pmx-pwr-off {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hdd_temp: sata-port@0 {
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts
index b69b096f267b..dd5c8ffc8781 100644
--- a/arch/arm/boot/dts/kirkwood-nsa320.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts
@@ -142,39 +142,39 @@
 			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
 		pinctrl-names = "default";
 
-		green-sys {
+		led-green-sys {
 			label = "nsa320:green:sys";
 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 		};
-		orange-sys {
+		led-orange-sys {
 			label = "nsa320:orange:sys";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd1 {
+		led-green-hdd1 {
 			label = "nsa320:green:hdd1";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd1 {
+		led-red-hdd1 {
 			label = "nsa320:red:hdd1";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd2 {
+		led-green-hdd2 {
 			label = "nsa320:green:hdd2";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd2 {
+		led-red-hdd2 {
 			label = "nsa320:red:hdd2";
 			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 		};
-		green-usb {
+		led-green-usb {
 			label = "nsa320:green:usb";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		green-copy {
+		led-green-copy {
 			label = "nsa320:green:copy";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		red-copy {
+		led-red-copy {
 			label = "nsa320:red:copy";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
@@ -211,7 +211,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts
index 6f8085dbb1f4..f0786a5f2ce6 100644
--- a/arch/arm/boot/dts/kirkwood-nsa325.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts
@@ -162,39 +162,39 @@
 			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
 		pinctrl-names = "default";
 
-		green-sys {
+		led-green-sys {
 			label = "nsa325:green:sys";
 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 		};
-		orange-sys {
+		led-orange-sys {
 			label = "nsa325:orange:sys";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd1 {
+		led-green-hdd1 {
 			label = "nsa325:green:hdd1";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd1 {
+		led-red-hdd1 {
 			label = "nsa325:red:hdd1";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd2 {
+		led-green-hdd2 {
 			label = "nsa325:green:hdd2";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd2 {
+		led-red-hdd2 {
 			label = "nsa325:red:hdd2";
 			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 		};
-		green-usb {
+		led-green-usb {
 			label = "nsa325:green:usb";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		green-copy {
+		led-green-copy {
 			label = "nsa325:green:copy";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		red-copy {
+		led-red-copy {
 			label = "nsa325:red:copy";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
@@ -224,7 +224,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
index 8f73197f251a..e9bd9c551af5 100644
--- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
@@ -63,22 +63,20 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 		};
-		copy {
+		button-copy {
 			label = "Copy Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
@@ -150,7 +148,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
index 8ea430168ea5..20c6290d2037 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
@@ -115,10 +115,8 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_gpio_init>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Init Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
index 946f0f453dd1..2bc4b68bd723 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
@@ -44,7 +44,7 @@
 		i2c@11100 {
 			status = "okay";
 
-			s24c02: s24c02@50 {
+			s24c02: eeprom@50 {
 				compatible = "atmel,24c02";
 				reg = <0x50>;
 			};
@@ -136,8 +136,6 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_gpio_init>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		button {
 			label = "Init Button";
diff --git a/arch/arm/boot/dts/kirkwood-openrd-base.dts b/arch/arm/boot/dts/marvell/kirkwood-openrd-base.dts
index 094191ece3d7..094191ece3d7 100644
--- a/arch/arm/boot/dts/kirkwood-openrd-base.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd-base.dts
diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
index d4e0b8150a84..cf26e2ceaaa0 100644
--- a/arch/arm/boot/dts/kirkwood-openrd-client.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
@@ -38,7 +38,7 @@
 		simple-audio-card,mclk-fs = <256>;
 
 		simple-audio-card,cpu {
-			sound-dai = <&audio0 0>;
+			sound-dai = <&audio0>;
 		};
 
 		simple-audio-card,codec {
diff --git a/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts b/arch/arm/boot/dts/marvell/kirkwood-openrd-ultimate.dts
index 888e13320c19..888e13320c19 100644
--- a/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd-ultimate.dts
diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi
index 47f03c69c55a..9d7cff4feada 100644
--- a/arch/arm/boot/dts/kirkwood-openrd.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi
@@ -53,7 +53,7 @@
 			cd-gpios = <&gpio0 29 9>;
 		};
 		gpio@10100 {
-			p28 {
+			p28-hog {
 				gpio-hog;
 				gpios = <28 GPIO_ACTIVE_HIGH>;
 				/*
@@ -71,7 +71,7 @@
 			};
 		};
 		gpio@10140 {
-			p2 {
+			p2-hog {
 				gpio-hog;
 				gpios = <2 GPIO_ACTIVE_HIGH>;
 				/*
diff --git a/arch/arm/boot/dts/kirkwood-pogo_e02.dts b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
index f9e95e55f36d..39a5345332da 100644
--- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
@@ -33,12 +33,12 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		health {
+		led-health {
 			label = "pogo_e02:green:health";
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		fault {
+		led-fault {
 			label = "pogo_e02:orange:fault";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
index 5aa4669ae254..0e9c4cf79822 100644
--- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
@@ -29,12 +29,10 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_eject>;
 		pinctrl-names = "default";
 
-		eject {
+		button-eject {
 			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <KEY_EJECTCD>;
@@ -48,12 +46,12 @@
 		pinctrl-0 = <&pmx_led_green &pmx_led_red>;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "pogoplugv4:green:health";
 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
-		fault {
+		led-fault {
 			label = "pogoplugv4:red:fault";
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/marvell/kirkwood-rd88f6192.dts
new file mode 100644
index 000000000000..f00325ffde07
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-rd88f6192.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell RD88F6192 Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are common between the three
+ * variants of the Marvell Kirkwood Development Board.
+ */
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+
+/ {
+	model = "Marvell RD88F6192 reference design";
+	compatible = "marvell,rd88f6192", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_usb_power>;
+			pinctrl-names = "default";
+
+			pmx_usb_power: pmx-usb-power {
+				marvell,pins = "mpp10";
+				marvell,function = "gpo";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p128@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p128", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "USB VBUS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-a.dts
index 5da163591bbf..5da163591bbf 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-a.dts
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-z0.dts
index 9d88301daf0e..72edd47e19ff 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-z0.dts
@@ -19,7 +19,7 @@
 };
 
 &eth1 {
-      status = "disabled";
+	status = "disabled";
 };
 
 &switch {
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281.dtsi
index f1f8eee132e8..9d62f910cddf 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281.dtsi
@@ -48,7 +48,7 @@
 			cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 			/* No WP GPIO */
 		};
-       };
+	};
 };
 
 &nand {
@@ -105,7 +105,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -126,7 +126,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/marvell/kirkwood-rs212.dts
index c51cea883215..4ad412115a24 100644
--- a/arch/arm/boot/dts/kirkwood-rs212.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-rs212.dts
@@ -43,7 +43,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie1 {
diff --git a/arch/arm/boot/dts/kirkwood-rs409.dts b/arch/arm/boot/dts/marvell/kirkwood-rs409.dts
index 43673b03cb35..43673b03cb35 100644
--- a/arch/arm/boot/dts/kirkwood-rs409.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-rs409.dts
diff --git a/arch/arm/boot/dts/kirkwood-rs411.dts b/arch/arm/boot/dts/marvell/kirkwood-rs411.dts
index 41fa63cec839..41fa63cec839 100644
--- a/arch/arm/boot/dts/kirkwood-rs411.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-rs411.dts
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-common.dtsi
index 0a698d3b7393..0a698d3b7393 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-common.dtsi
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts
index ae8f493c9a0f..eb185273376e 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts
@@ -33,7 +33,7 @@
 		pinctrl-0 = <&pmx_led_blue>;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "sheevaplug:blue:health";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts
index c73cc904e5c4..ce73fcf2255f 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts
@@ -28,13 +28,13 @@
 		pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "sheevaplug:blue:health";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
 
-		misc {
+		led-misc {
 			label = "sheevaplug:red:misc";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
index 8f6c387d3a8b..6b7c5218b1fb 100644
--- a/arch/arm/boot/dts/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
@@ -286,14 +286,15 @@
 		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
 			 &gpio1 1 GPIO_ACTIVE_HIGH
 			 &gpio1 2 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2200 1>,
+				<2500 2>,
+				<3000 4>,
+				<3300 3>,
+				<3700 5>,
+				<3800 6>,
+				<4200 7>;
 	};
 
 	gpio-fan-150-15-18 {
@@ -306,14 +307,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2200 1>,
+				<2500 2>,
+				<3000 4>,
+				<3300 3>,
+				<3700 5>,
+				<3800 6>,
+				<4200 7>;
 	};
 
 	gpio-fan-100-32-35 {
@@ -326,14 +328,15 @@
 			 &gpio1 1 GPIO_ACTIVE_HIGH
 			 &gpio1 2 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-18 {
@@ -346,14 +349,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-35-1 {
@@ -366,14 +370,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-35-3 {
@@ -388,14 +393,15 @@
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
 			       &gpio1 12 GPIO_ACTIVE_HIGH
 			       &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-leds-alarm-12 {
@@ -404,7 +410,7 @@
 		pinctrl-0 = <&pmx_alarmled_12>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:alarm";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		};
@@ -418,42 +424,42 @@
 			     &pmx_hddled_26 &pmx_hddled_27>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-green {
+		led-hdd2-green {
 			label = "synology:green:hdd2";
 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-amber {
+		led-hdd2-amber {
 			label = "synology:amber:hdd2";
 			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd3-green {
+		led-hdd3-green {
 			label = "synology:green:hdd3";
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd3-amber {
+		led-hdd3-amber {
 			label = "synology:amber:hdd3";
 			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd4-green {
+		led-hdd4-green {
 			label = "synology:green:hdd4";
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd4-amber {
+		led-hdd4-amber {
 			label = "synology:amber:hdd4";
 			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
 		};
@@ -465,12 +471,12 @@
 		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
 		};
@@ -482,22 +488,22 @@
 		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-green {
+		led-hdd2-green {
 			label = "synology:green:hdd2";
 			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-amber {
+		led-hdd2-amber {
 			label = "synology:amber:hdd2";
 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
 		};
@@ -512,52 +518,52 @@
 			     &pmx_hddled_45>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-green {
+		led-hdd2-green {
 			label = "synology:green:hdd2";
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-amber {
+		led-hdd2-amber {
 			label = "synology:amber:hdd2";
 			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd3-green {
+		led-hdd3-green {
 			label = "synology:green:hdd3";
 			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd3-amber {
+		led-hdd3-amber {
 			label = "synology:amber:hdd3";
 			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd4-green {
+		led-hdd4-green {
 			label = "synology:green:hdd4";
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd4-amber {
+		led-hdd4-amber {
 			label = "synology:amber:hdd4";
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd5-green {
+		led-hdd5-green {
 			label = "synology:green:hdd5";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd5-amber {
+		led-hdd5-amber {
 			label = "synology:amber:hdd5";
 			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 		};
@@ -569,22 +575,22 @@
 		pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-green {
+		led-hdd2-green {
 			label = "synology:green:hdd2";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-amber {
+		led-hdd2-amber {
 			label = "synology:amber:hdd2";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
@@ -847,7 +853,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts
index fe63b3a03a72..a6e77a487d00 100644
--- a/arch/arm/boot/dts/kirkwood-t5325.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts
@@ -156,12 +156,10 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_power>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
@@ -219,7 +217,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/marvell/kirkwood-topkick.dts
index a5b51e29f63e..a5b51e29f63e 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-topkick.dts
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts
index 30892c19aceb..a2e0ad4b84d8 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts
@@ -35,17 +35,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts
index aba1205981f1..35be6bce1dba 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts
@@ -35,17 +35,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts219.dtsi
index 994cabcf4b51..1939462a5f48 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts219.dtsi
@@ -86,7 +86,7 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@X {
-                /* overwrite reg property in board file */
+		/* overwrite reg property in board file */
 	};
 };
 
@@ -98,7 +98,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-ts419-6281.dts b/arch/arm/boot/dts/marvell/kirkwood-ts419-6281.dts
index 4a42ebcca4f0..4a42ebcca4f0 100644
--- a/arch/arm/boot/dts/kirkwood-ts419-6281.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts419-6281.dts
diff --git a/arch/arm/boot/dts/kirkwood-ts419-6282.dts b/arch/arm/boot/dts/marvell/kirkwood-ts419-6282.dts
index be772e194c2b..be772e194c2b 100644
--- a/arch/arm/boot/dts/kirkwood-ts419-6282.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts419-6282.dts
diff --git a/arch/arm/boot/dts/kirkwood-ts419.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
index 717236853e45..f136059607b7 100644
--- a/arch/arm/boot/dts/kirkwood-ts419.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
@@ -36,17 +36,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/marvell/kirkwood.dtsi
index fca31a5d5ac7..8a1338e672b3 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood.dtsi
@@ -24,9 +24,9 @@
 	};
 
 	aliases {
-	       gpio0 = &gpio0;
-	       gpio1 = &gpio1;
-	       i2c0 = &i2c0;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		i2c0 = &i2c0;
 	};
 
 	mbus@f1000000 {
@@ -263,7 +263,7 @@
 			status = "okay";
 		};
 
-		usb0: ehci@50000 {
+		usb0: usb@50000 {
 			compatible = "marvell,orion-ehci";
 			reg = <0x50000 0x1000>;
 			interrupts = <19>;
@@ -279,15 +279,15 @@
 			clocks = <&gate_clk 8>;
 
 			xor00 {
-			      interrupts = <5>;
-			      dmacap,memcpy;
-			      dmacap,xor;
+				interrupts = <5>;
+				dmacap,memcpy;
+				dmacap,xor;
 			};
 			xor01 {
-			      interrupts = <6>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			      dmacap,memset;
+				interrupts = <6>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
 			};
 		};
 
@@ -299,15 +299,15 @@
 			clocks = <&gate_clk 16>;
 
 			xor00 {
-			      interrupts = <7>;
-			      dmacap,memcpy;
-			      dmacap,xor;
+				interrupts = <7>;
+				dmacap,memcpy;
+				dmacap,xor;
 			};
 			xor01 {
-			      interrupts = <8>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			      dmacap,memset;
+				interrupts = <8>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
index 04f1ae1382e7..bc64348b8218 100644
--- a/arch/arm/boot/dts/mmp2-brownstone.dts
+++ b/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
@@ -28,7 +28,7 @@
 &twsi1 {
 	status = "okay";
 	pmic: max8925@3c {
-		compatible = "maxium,max8925";
+		compatible = "maxim,max8925";
 		reg = <0x3c>;
 		interrupts = <1>;
 		interrupt-parent = <&intcmux4>;
diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts
index 55ea87870af3..86c425b72fa7 100644
--- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
+++ b/arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts
@@ -113,8 +113,8 @@
 			  "Headphones", "HPOR",
 			  "MIC2", "Mic Jack";
 		widgets = "Headphone", "Headphones", "Microphone", "Mic Jack";
-		hp-det-gpio = <&gpio 97 GPIO_ACTIVE_HIGH>;
-		mic-det-gpio = <&gpio 96 GPIO_ACTIVE_HIGH>;
+		hp-det-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>;
+		mic-det-gpios = <&gpio 96 GPIO_ACTIVE_HIGH>;
 	};
 
 	soc {
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/marvell/mmp2.dtsi
index 987d792f67ea..987d792f67ea 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/marvell/mmp2.dtsi
diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/marvell/mmp3-dell-ariel.dts
index fe6df364a9eb..fe6df364a9eb 100644
--- a/arch/arm/boot/dts/mmp3-dell-ariel.dts
+++ b/arch/arm/boot/dts/marvell/mmp3-dell-ariel.dts
diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/marvell/mmp3.dtsi
index a4fb9203ec1f..a4fb9203ec1f 100644
--- a/arch/arm/boot/dts/mmp3.dtsi
+++ b/arch/arm/boot/dts/marvell/mmp3.dtsi
diff --git a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
index e172029a0c4d..a260c42dbda3 100644
--- a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi
+++ b/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
@@ -50,10 +50,10 @@
 		pinctrl-names = "default";
 
 		gpio-fan,speed-map =
-			<0		3
-			1500	2
-			3250	1
-			5000	0>;
+			<   0 3>,
+			<1500 2>,
+			<3250 1>,
+			<5000 0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi
index c2d87ba6190a..055ac754c5fd 100644
--- a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi
+++ b/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi
@@ -48,8 +48,6 @@
 / {
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_power_switch>;
 		pinctrl-names = "default";
 
diff --git a/arch/arm/boot/dts/orion5x-kuroboxpro.dts b/arch/arm/boot/dts/marvell/orion5x-kuroboxpro.dts
index e28b568e741a..e28b568e741a 100644
--- a/arch/arm/boot/dts/orion5x-kuroboxpro.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-kuroboxpro.dts
diff --git a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
index 03471d30bfd9..12a4aac2633e 100644
--- a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
@@ -35,22 +35,21 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_buttons>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		front_button {
+
+		button-front {
 			label = "Front Push Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
 		};
 
-		power_rocker_sw_on {
+		switch-power-rocker-sw-on {
 			label = "Power rocker switch (on|auto)";
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <1>; /* D2NET_SWITCH_POWER_ON */
 			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		power_rocker_sw_off {
+		switch-power-rocker-sw-off {
 			label = "Power rocker switch (auto|off)";
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */
diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts
index f17e25ac98dd..f81acb9b7223 100644
--- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -39,9 +39,8 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_power_button>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button@1 {
+
+		button-1 {
 			label = "Power-on Switch";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
@@ -53,7 +52,7 @@
 		pinctrl-0 = <&pmx_power_led>;
 		pinctrl-names = "default";
 
-		led@1 {
+		led-1 {
 			label = "power:blue";
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lschl.dts b/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts
index ee751995c8d0..79fee048c900 100644
--- a/arch/arm/boot/dts/orion5x-linkstation-lschl.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts
@@ -61,7 +61,7 @@
 	};
 
 	gpio_keys {
-		func {
+		func-button {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
@@ -90,7 +90,7 @@
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 		};
 
-		func {
+		func-led {
 			label = "lschl:func:blue:top";
 			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/marvell/orion5x-linkstation-lsgl.dts
index 9f6fedd39170..9f6fedd39170 100644
--- a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-linkstation-lsgl.dts
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/marvell/orion5x-linkstation-lswtgl.dts
index 7f77ce8cc1fc..7f77ce8cc1fc 100644
--- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-linkstation-lswtgl.dts
diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/marvell/orion5x-linkstation.dtsi
index b6c9b85951ea..b6c9b85951ea 100644
--- a/arch/arm/boot/dts/orion5x-linkstation.dtsi
+++ b/arch/arm/boot/dts/marvell/orion5x-linkstation.dtsi
diff --git a/arch/arm/boot/dts/orion5x-lswsgl.dts b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
index 2fbc17d6dfa4..e0da406c430f 100644
--- a/arch/arm/boot/dts/orion5x-lswsgl.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
@@ -74,22 +74,21 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_buttons>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		func {
+
+		key-func {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		key-power {
 			label = "Power-on Switch";
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <KEY_RESERVED>; /* LSMINI_SW_POWER */
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 		};
 
-		autopower {
+		key-autopower {
 			label = "Power-auto Switch";
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <KEY_ESC>; /* LSMINI_SW_AUTOPOWER */
@@ -103,24 +102,24 @@
 			     &pmx_led_power>;
 		pinctrl-names = "default";
 
-		alarm {
+		led-alarm {
 			label = "lswsgl:alarm:red";
-			gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 		};
 
-		info {
+		led-info {
 			label = "lswsgl:info:amber";
-			gpio = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 		};
 
-		func {
+		led-func {
 			label = "lswsgl:func:blue:top";
-			gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "lswsgl:power:blue:bottom";
-			gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 	};
diff --git a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
index d57859998350..cb1bd24b7ae3 100644
--- a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
@@ -35,15 +35,14 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_buttons>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power {
+
+		key-power {
 			label = "Power";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		key-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/orion5x-mv88f5181.dtsi b/arch/arm/boot/dts/marvell/orion5x-mv88f5181.dtsi
index 819f9efb7058..819f9efb7058 100644
--- a/arch/arm/boot/dts/orion5x-mv88f5181.dtsi
+++ b/arch/arm/boot/dts/marvell/orion5x-mv88f5181.dtsi
diff --git a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi b/arch/arm/boot/dts/marvell/orion5x-mv88f5182.dtsi
index 86b87fb26dc9..86b87fb26dc9 100644
--- a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
+++ b/arch/arm/boot/dts/marvell/orion5x-mv88f5182.dtsi
diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts
index 4f4888ec9138..d63ea15539aa 100644
--- a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts
@@ -35,7 +35,7 @@
 		pinctrl-0 = <&pmx_reset_button>;
 		pinctrl-names = "default";
 
-		reset {
+		key-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
@@ -137,8 +137,12 @@
 
 			port@3 {
 				reg = <3>;
-				label = "cpu";
 				ethernet = <&ethport>;
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
 			};
 
 			port@5 {
@@ -208,6 +212,7 @@
 		/* Hardwired to DSA switch */
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
diff --git a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts
index fd78aa02a3c5..75ab913b21e5 100644
--- a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts
@@ -32,7 +32,7 @@
 		pinctrl-0 = <&pmx_debug_led>;
 		pinctrl-names = "default";
 
-		led@0 {
+		led-0 {
 			label = "rd88f5182:cpu";
 			linux,default-trigger = "heartbeat";
 			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/marvell/orion5x.dtsi
index 2d41f5c166ee..939259c57e05 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/marvell/orion5x.dtsi
@@ -146,7 +146,7 @@
 				status = "okay";
 			};
 
-			ehci0: ehci@50000 {
+			ehci0: usb@50000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x50000 0x1000>;
 				interrupts = <17>;
@@ -218,7 +218,7 @@
 				status = "okay";
 			};
 
-			ehci1: ehci@a0000 {
+			ehci1: usb@a0000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0xa0000 0x1000>;
 				interrupts = <12>;
diff --git a/arch/arm/boot/dts/pxa168-aspenite.dts b/arch/arm/boot/dts/marvell/pxa168-aspenite.dts
index 8bade6bf395b..8bade6bf395b 100644
--- a/arch/arm/boot/dts/pxa168-aspenite.dts
+++ b/arch/arm/boot/dts/marvell/pxa168-aspenite.dts
diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/marvell/pxa168.dtsi
index 4fe7735c7c58..22ed10cb5619 100644
--- a/arch/arm/boot/dts/pxa168.dtsi
+++ b/arch/arm/boot/dts/marvell/pxa168.dtsi
@@ -53,6 +53,8 @@
 				compatible = "mrvl,mmp-timer";
 				reg = <0xd4014000 0x100>;
 				interrupts = <13>;
+				clocks = <&soc_clocks PXA168_CLK_TIMER>;
+				resets = <&soc_clocks PXA168_CLK_TIMER>;
 			};
 
 			uart1: serial@d4017000 {
@@ -151,7 +153,7 @@
 			};
 		};
 
-		soc_clocks: clocks{
+		soc_clocks: clocks {
 			compatible = "marvell,pxa168-clock";
 			reg = <0xd4050000 0x1000>,
 			      <0xd4282800 0x400>,
diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/marvell/pxa910-dkb.dts
index ce76158867c7..ce76158867c7 100644
--- a/arch/arm/boot/dts/pxa910-dkb.dts
+++ b/arch/arm/boot/dts/marvell/pxa910-dkb.dts
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/marvell/pxa910.dtsi
index 352a39357810..bd64ac1ec66f 100644
--- a/arch/arm/boot/dts/pxa910.dtsi
+++ b/arch/arm/boot/dts/marvell/pxa910.dtsi
@@ -163,7 +163,7 @@
 			};
 		};
 
-		soc_clocks: clocks{
+		soc_clocks: clocks {
 			compatible = "marvell,pxa910-clock";
 			reg = <0xd4050000 0x1000>,
 			      <0xd4282800 0x400>,
diff --git a/arch/arm/boot/dts/mediatek/Makefile b/arch/arm/boot/dts/mediatek/Makefile
new file mode 100644
index 000000000000..e48de3efeb3b
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MEDIATEK) += \
+	mt2701-evb.dtb \
+	mt6572-jty-d101.dtb \
+	mt6572-lenovo-a369i.dtb \
+	mt6580-evbp1.dtb \
+	mt6582-prestigio-pmt5008-3g.dtb \
+	mt6589-aquaris5.dtb \
+	mt6589-fairphone-fp1.dtb \
+	mt6592-evb.dtb \
+	mt7623a-rfb-emmc.dtb \
+	mt7623a-rfb-nand.dtb \
+	mt7623n-rfb-emmc.dtb \
+	mt7623n-bananapi-bpi-r2.dtb \
+	mt7629-rfb.dtb \
+	mt8127-moose.dtb \
+	mt8135-evbp1.dtb
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mediatek/mt2701-evb.dts
index d1535f385f36..e97dc37f716c 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mediatek/mt2701-evb.dts
@@ -50,6 +50,7 @@
 
 	bt_sco_codec:bt_sco_codec {
 		compatible = "linux,bt-sco";
+		#sound-dai-cells = <0>;
 	};
 
 	backlight_lcd: backlight_lcd {
@@ -231,7 +232,7 @@
 				 <MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1>,
 				 <MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2>,
 				 <MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3>;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-up;
 		};
 	};
@@ -244,7 +245,7 @@
 &usb2 {
 	status = "okay";
 	usb-role-switch;
-	connector{
+	connector {
 		compatible = "gpio-usb-b-connector", "usb-b-connector";
 		type = "micro";
 		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/mt2701-pinfunc.h b/arch/arm/boot/dts/mediatek/mt2701-pinfunc.h
index 136a25a0ae28..136a25a0ae28 100644
--- a/arch/arm/boot/dts/mt2701-pinfunc.h
+++ b/arch/arm/boot/dts/mediatek/mt2701-pinfunc.h
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mediatek/mt2701.dtsi
index b8eba3ba153c..ce6a4015fed5 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt2701.dtsi
@@ -178,7 +178,6 @@
 		compatible = "mediatek,mt2701-pinctrl";
 		reg = <0 0x1000b000 0 0x1000>;
 		mediatek,pctl-regmap = <&syscfg_pctl_a>;
-		pins-are-numbered;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -360,7 +359,7 @@
 		mediatek,apmixedsys = <&apmixedsys>;
 	};
 
-	nandc: nfi@1100d000 {
+	nandc: nand-controller@1100d000 {
 		compatible = "mediatek,mt2701-nfc";
 		reg = <0 0x1100d000 0 0x1000>;
 		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mediatek/mt6323.dtsi
index 7fda40ab5fe8..c230c865116d 100644
--- a/arch/arm/boot/dts/mt6323.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt6323.dtsi
@@ -21,10 +21,10 @@
 			status = "disabled";
 		};
 
-		mt6323regulator: mt6323regulator{
+		mt6323regulator: mt6323regulator {
 			compatible = "mediatek,mt6323-regulator";
 
-			mt6323_vproc_reg: buck_vproc{
+			mt6323_vproc_reg: buck_vproc {
 				regulator-name = "vproc";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -33,7 +33,7 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vsys_reg: buck_vsys{
+			mt6323_vsys_reg: buck_vsys {
 				regulator-name = "vsys";
 				regulator-min-microvolt = <1400000>;
 				regulator-max-microvolt = <2987500>;
@@ -42,13 +42,13 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vpa_reg: buck_vpa{
+			mt6323_vpa_reg: buck_vpa {
 				regulator-name = "vpa";
 				regulator-min-microvolt = < 500000>;
 				regulator-max-microvolt = <3650000>;
 			};
 
-			mt6323_vtcxo_reg: ldo_vtcxo{
+			mt6323_vtcxo_reg: ldo_vtcxo {
 				regulator-name = "vtcxo";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -57,28 +57,28 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vcn28_reg: ldo_vcn28{
+			mt6323_vcn28_reg: ldo_vcn28 {
 				regulator-name = "vcn28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
 				regulator-enable-ramp-delay = <185>;
 			};
 
-			mt6323_vcn33_bt_reg: ldo_vcn33_bt{
+			mt6323_vcn33_bt_reg: ldo_vcn33_bt {
 				regulator-name = "vcn33_bt";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3600000>;
 				regulator-enable-ramp-delay = <185>;
 			};
 
-			mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
+			mt6323_vcn33_wifi_reg: ldo_vcn33_wifi {
 				regulator-name = "vcn33_wifi";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3600000>;
 				regulator-enable-ramp-delay = <185>;
 			};
 
-			mt6323_va_reg: ldo_va{
+			mt6323_va_reg: ldo_va {
 				regulator-name = "va";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -87,14 +87,14 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vcama_reg: ldo_vcama{
+			mt6323_vcama_reg: ldo_vcama {
 				regulator-name = "vcama";
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <2800000>;
 				regulator-enable-ramp-delay = <216>;
 			};
 
-			mt6323_vio28_reg: ldo_vio28{
+			mt6323_vio28_reg: ldo_vio28 {
 				regulator-name = "vio28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -103,7 +103,7 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vusb_reg: ldo_vusb{
+			mt6323_vusb_reg: ldo_vusb {
 				regulator-name = "vusb";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -111,7 +111,7 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vmc_reg: ldo_vmc{
+			mt6323_vmc_reg: ldo_vmc {
 				regulator-name = "vmc";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
@@ -119,7 +119,7 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vmch_reg: ldo_vmch{
+			mt6323_vmch_reg: ldo_vmch {
 				regulator-name = "vmch";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -127,7 +127,7 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vemc3v3_reg: ldo_vemc3v3{
+			mt6323_vemc3v3_reg: ldo_vemc3v3 {
 				regulator-name = "vemc3v3";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -135,49 +135,49 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vgp1_reg: ldo_vgp1{
+			mt6323_vgp1_reg: ldo_vgp1 {
 				regulator-name = "vgp1";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-enable-ramp-delay = <216>;
 			};
 
-			mt6323_vgp2_reg: ldo_vgp2{
+			mt6323_vgp2_reg: ldo_vgp2 {
 				regulator-name = "vgp2";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-enable-ramp-delay = <216>;
 			};
 
-			mt6323_vgp3_reg: ldo_vgp3{
+			mt6323_vgp3_reg: ldo_vgp3 {
 				regulator-name = "vgp3";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-enable-ramp-delay = <216>;
 			};
 
-			mt6323_vcn18_reg: ldo_vcn18{
+			mt6323_vcn18_reg: ldo_vcn18 {
 				regulator-name = "vcn18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-enable-ramp-delay = <216>;
 			};
 
-			mt6323_vsim1_reg: ldo_vsim1{
+			mt6323_vsim1_reg: ldo_vsim1 {
 				regulator-name = "vsim1";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-enable-ramp-delay = <216>;
 			};
 
-			mt6323_vsim2_reg: ldo_vsim2{
+			mt6323_vsim2_reg: ldo_vsim2 {
 				regulator-name = "vsim2";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-enable-ramp-delay = <216>;
 			};
 
-			mt6323_vrtc_reg: ldo_vrtc{
+			mt6323_vrtc_reg: ldo_vrtc {
 				regulator-name = "vrtc";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -185,28 +185,28 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vcamaf_reg: ldo_vcamaf{
+			mt6323_vcamaf_reg: ldo_vcamaf {
 				regulator-name = "vcamaf";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-enable-ramp-delay = <216>;
 			};
 
-			mt6323_vibr_reg: ldo_vibr{
+			mt6323_vibr_reg: ldo_vibr {
 				regulator-name = "vibr";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-enable-ramp-delay = <36>;
 			};
 
-			mt6323_vrf18_reg: ldo_vrf18{
+			mt6323_vrf18_reg: ldo_vrf18 {
 				regulator-name = "vrf18";
 				regulator-min-microvolt = <1825000>;
 				regulator-max-microvolt = <1825000>;
 				regulator-enable-ramp-delay = <187>;
 			};
 
-			mt6323_vm_reg: ldo_vm{
+			mt6323_vm_reg: ldo_vm {
 				regulator-name = "vm";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1800000>;
@@ -215,7 +215,7 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vio18_reg: ldo_vio18{
+			mt6323_vio18_reg: ldo_vio18 {
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -224,14 +224,14 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vcamd_reg: ldo_vcamd{
+			mt6323_vcamd_reg: ldo_vcamd {
 				regulator-name = "vcamd";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-enable-ramp-delay = <216>;
 			};
 
-			mt6323_vcamio_reg: ldo_vcamio{
+			mt6323_vcamio_reg: ldo_vcamio {
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/mediatek/mt6572-jty-d101.dts b/arch/arm/boot/dts/mediatek/mt6572-jty-d101.dts
new file mode 100644
index 000000000000..18c3cab6b7a3
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6572-jty-d101.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Max Shevchenko <wctrl@proton.me>
+ */
+
+/dts-v1/;
+#include "mt6572.dtsi"
+
+/ {
+	model = "JTY D101";
+	compatible = "jty,d101", "mediatek,mt6572";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		stdout-path = "serial0:921600n8";
+
+		framebuffer: framebuffer@bf400000 {
+			compatible = "simple-framebuffer";
+			memory-region = <&framebuffer_reserved>;
+			width = <1024>;
+			height = <600>;
+			stride = <(1024 * 2)>;
+			format = "r5g6b5";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		connsys@80000000 {
+			reg = <0x80000000 0x100000>;
+			no-map;
+		};
+
+		modem@be000000 {
+			reg = <0xbe000000 0x1400000>;
+			no-map;
+		};
+
+		framebuffer_reserved: framebuffer@bf400000 {
+			reg = <0xbf400000 0xc00000>;
+			no-map;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6572-lenovo-a369i.dts b/arch/arm/boot/dts/mediatek/mt6572-lenovo-a369i.dts
new file mode 100644
index 000000000000..c2f0c60ea777
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6572-lenovo-a369i.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Max Shevchenko <wctrl@proton.me>
+ */
+
+/dts-v1/;
+#include "mt6572.dtsi"
+
+/ {
+	model = "Lenovo A369i";
+	compatible = "lenovo,a369i", "mediatek,mt6572";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		stdout-path = "serial0:921600n8";
+
+		framebuffer: framebuffer@9fa00000 {
+			compatible = "simple-framebuffer";
+			memory-region = <&framebuffer_reserved>;
+			width = <480>;
+			height = <800>;
+			stride = <(480 * 2)>;
+			format = "r5g6b5";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		connsys@80000000 {
+			reg = <0x80000000 0x100000>;
+			no-map;
+		};
+
+		framebuffer_reserved: framebuffer@9fa00000 {
+			reg = <0x9fa00000 0x600000>;
+			no-map;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6572.dtsi b/arch/arm/boot/dts/mediatek/mt6572.dtsi
new file mode 100644
index 000000000000..ac70f266d698
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6572.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Max Shevchenko <wctrl@proton.me>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt6589-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt6572-wdt", "mediatek,mt6589-wdt";
+			reg = <0x10007000 0x100>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_LOW>;
+			timeout-sec = <15>;
+			#reset-cells = <1>;
+		};
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt6572-timer", "mediatek,mt6577-timer";
+			reg = <0x10008000 0x80>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&system_clk>, <&rtc_clk>;
+			clock-names = "system-clk", "rtc-clk";
+		};
+
+		sysirq: interrupt-controller@10200100 {
+			compatible = "mediatek,mt6572-sysirq", "mediatek,mt6577-sysirq";
+			reg = <0x10200100 0x1c>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
+
+		gic: interrupt-controller@10211000 {
+			compatible = "arm,cortex-a7-gic";
+			reg = <0x10211000 0x1000>,
+			      <0x10212000 0x2000>,
+			      <0x10214000 0x2000>,
+			      <0x10216000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
+
+		uart0: serial@11005000 {
+			compatible = "mediatek,mt6572-uart", "mediatek,mt6577-uart";
+			reg = <0x11005000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
+
+		uart1: serial@11006000 {
+			compatible = "mediatek,mt6572-uart", "mediatek,mt6577-uart";
+			reg = <0x11006000 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mt6580-evbp1.dts b/arch/arm/boot/dts/mediatek/mt6580-evbp1.dts
index 755a0774a8ee..755a0774a8ee 100644
--- a/arch/arm/boot/dts/mt6580-evbp1.dts
+++ b/arch/arm/boot/dts/mediatek/mt6580-evbp1.dts
diff --git a/arch/arm/boot/dts/mt6580.dtsi b/arch/arm/boot/dts/mediatek/mt6580.dtsi
index 9e17698c0609..9e17698c0609 100644
--- a/arch/arm/boot/dts/mt6580.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt6580.dtsi
diff --git a/arch/arm/boot/dts/mt6582-prestigio-pmt5008-3g.dts b/arch/arm/boot/dts/mediatek/mt6582-prestigio-pmt5008-3g.dts
index b057e037f940..b057e037f940 100644
--- a/arch/arm/boot/dts/mt6582-prestigio-pmt5008-3g.dts
+++ b/arch/arm/boot/dts/mediatek/mt6582-prestigio-pmt5008-3g.dts
diff --git a/arch/arm/boot/dts/mt6582.dtsi b/arch/arm/boot/dts/mediatek/mt6582.dtsi
index 4263371784cd..4263371784cd 100644
--- a/arch/arm/boot/dts/mt6582.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt6582.dtsi
diff --git a/arch/arm/boot/dts/mt6589-aquaris5.dts b/arch/arm/boot/dts/mediatek/mt6589-aquaris5.dts
index 1e7079a3b449..1e7079a3b449 100644
--- a/arch/arm/boot/dts/mt6589-aquaris5.dts
+++ b/arch/arm/boot/dts/mediatek/mt6589-aquaris5.dts
diff --git a/arch/arm/boot/dts/mt6589-fairphone-fp1.dts b/arch/arm/boot/dts/mediatek/mt6589-fairphone-fp1.dts
index c952347981de..c952347981de 100644
--- a/arch/arm/boot/dts/mt6589-fairphone-fp1.dts
+++ b/arch/arm/boot/dts/mediatek/mt6589-fairphone-fp1.dts
diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mediatek/mt6589.dtsi
index c6babc8ad2ba..c6babc8ad2ba 100644
--- a/arch/arm/boot/dts/mt6589.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt6589.dtsi
diff --git a/arch/arm/boot/dts/mt6592-evb.dts b/arch/arm/boot/dts/mediatek/mt6592-evb.dts
index 5e00c1cca2d1..5e00c1cca2d1 100644
--- a/arch/arm/boot/dts/mt6592-evb.dts
+++ b/arch/arm/boot/dts/mediatek/mt6592-evb.dts
diff --git a/arch/arm/boot/dts/mt6592.dtsi b/arch/arm/boot/dts/mediatek/mt6592.dtsi
index 3716f8db951c..3716f8db951c 100644
--- a/arch/arm/boot/dts/mt6592.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt6592.dtsi
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mediatek/mt7623.dtsi
index 25d31e40a553..fd7a89cc337d 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt7623.dtsi
@@ -253,7 +253,6 @@
 		compatible = "mediatek,mt7623-pinctrl";
 		reg = <0 0x1000b000 0 0x1000>;
 		mediatek,pctl-regmap = <&syscfg_pctl_a>;
-		pins-are-numbered;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -309,7 +308,7 @@
 		clock-names = "spi", "wrap";
 	};
 
-	cir: cir@10013000 {
+	cir: ir-receiver@10013000 {
 		compatible = "mediatek,mt7623-cir";
 		reg = <0 0x10013000 0 0x1000>;
 		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
@@ -981,6 +980,18 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
+
+		gmac0: mac@0 {
+			compatible = "mediatek,eth-mac";
+			reg = <0>;
+			status = "disabled";
+		};
+
+		gmac1: mac@1 {
+			compatible = "mediatek,eth-mac";
+			reg = <1>;
+			status = "disabled";
+		};
 	};
 
 	crypto: crypto@1b240000 {
@@ -1132,13 +1143,13 @@
 				 <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
 				 <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_2mA>;
+			drive-strength = <2>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
 		pins-clk {
 			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_2mA>;
+			drive-strength = <2>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
 		};
 
@@ -1156,14 +1167,14 @@
 				 <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
 				 <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins-clk {
 			pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
 			bias-pull-down;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 		};
 
 		pins-wp {
@@ -1186,13 +1197,13 @@
 				 <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
 				 <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins-clk {
 			pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 	};
@@ -1200,7 +1211,7 @@
 	nand_pins_default: nanddefault {
 		pins-ale {
 			pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -1215,13 +1226,13 @@
 				 <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
 				 <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up;
 		};
 
 		pins-we {
 			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
 		};
 	};
diff --git a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dts
index e8b4b6d30d19..5654284bab01 100644
--- a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dts
@@ -112,75 +112,31 @@
 	status = "okay";
 };
 
-&eth {
-	status = "okay";
+&switch0 {
+	ports {
+		port@0 {
+			status = "okay";
+			label = "lan0";
+		};
+
+		port@1 {
+			status = "okay";
+			label = "lan1";
+		};
 
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "trgmii";
+		port@2 {
+			status = "okay";
+			label = "lan2";
+		};
 
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-			pause;
+		port@3 {
+			status = "okay";
+			label = "lan3";
 		};
-	};
 
-	mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch@0 {
-			compatible = "mediatek,mt7530";
-			reg = <0>;
-			mediatek,mcm;
-			resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
-			reset-names = "mcm";
-			core-supply = <&mt6323_vpa_reg>;
-			io-supply = <&mt6323_vemc3v3_reg>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "lan0";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "wan";
-				};
-
-				port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "trgmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
+		port@4 {
+			status = "okay";
+			label = "wan";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mediatek/mt7623a-rfb-nand.dts
index 61f5da68d4b0..afd177b3b516 100644
--- a/arch/arm/boot/dts/mt7623a-rfb-nand.dts
+++ b/arch/arm/boot/dts/mediatek/mt7623a-rfb-nand.dts
@@ -116,75 +116,31 @@
 	status = "okay";
 };
 
-&eth {
-	status = "okay";
+&switch0 {
+	ports {
+		port@0 {
+			status = "okay";
+			label = "lan0";
+		};
 
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "trgmii";
+		port@1 {
+			status = "okay";
+			label = "lan1";
+		};
 
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-			pause;
+		port@2 {
+			status = "okay";
+			label = "lan2";
 		};
-	};
 
-	mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch@0 {
-			compatible = "mediatek,mt7530";
-			reg = <0>;
-			mediatek,mcm;
-			resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
-			reset-names = "mcm";
-			core-supply = <&mt6323_vpa_reg>;
-			io-supply = <&mt6323_vemc3v3_reg>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "lan0";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "wan";
-				};
-
-				port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "trgmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
+		port@3 {
+			status = "okay";
+			label = "lan3";
+		};
+
+		port@4 {
+			status = "okay";
+			label = "wan";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/mediatek/mt7623a.dtsi b/arch/arm/boot/dts/mediatek/mt7623a.dtsi
new file mode 100644
index 000000000000..bcf909d58a1c
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7623a.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/power/mt7623a-power.h>
+#include "mt7623.dtsi"
+
+&afe {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
+&crypto {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "trgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
+&eth {
+	status = "okay";
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch0: switch@1f {
+			compatible = "mediatek,mt7530";
+			reg = <0x1f>;
+			mediatek,mcm;
+			resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
+			reset-names = "mcm";
+			core-supply = <&mt6323_vpa_reg>;
+			io-supply = <&mt6323_vemc3v3_reg>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					status = "disabled";
+					reg = <0>;
+					label = "swp0";
+				};
+
+				port@1 {
+					status = "disabled";
+					reg = <1>;
+					label = "swp1";
+				};
+
+				port@2 {
+					status = "disabled";
+					reg = <2>;
+					label = "swp2";
+				};
+
+				port@3 {
+					status = "disabled";
+					reg = <3>;
+					label = "swp3";
+				};
+
+				port@4 {
+					status = "disabled";
+					reg = <4>;
+					label = "swp4";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "trgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+};
+
+&nandc {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
+&pcie {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
+};
+
+&scpsys {
+	compatible = "mediatek,mt7623a-scpsys";
+	clocks = <&topckgen CLK_TOP_ETHIF_SEL>;
+	clock-names = "ethif";
+};
+
+&usb0 {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
+&usb1 {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
+};
+
+&usb2 {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
+};
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mediatek/mt7623n-bananapi-bpi-r2.dts
index 5008115d2494..a37f3fa223c7 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mediatek/mt7623n-bananapi-bpi-r2.dts
@@ -171,28 +171,38 @@
 	};
 };
 
-&eth {
+&gmac0 {
 	status = "okay";
+	phy-mode = "trgmii";
 
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "trgmii";
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
 
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-			pause;
-		};
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
 	};
+};
+
+&eth {
+	status = "okay";
 
-	mdio: mdio-bus {
+	mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch@0 {
+		switch@1f {
 			compatible = "mediatek,mt7530";
-			reg = <0>;
+			reg = <0x1f>;
 			reset-gpios = <&pio 33 0>;
 			core-supply = <&mt6323_vpa_reg>;
 			io-supply = <&mt6323_vemc3v3_reg>;
@@ -226,6 +236,19 @@
 					label = "lan3";
 				};
 
+				port@5 {
+					reg = <5>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
 				port@6 {
 					reg = <6>;
 					label = "cpu";
@@ -322,6 +345,12 @@
 	vqmmc-supply = <&reg_3p3v>;
 };
 
+&mt6323keys {
+	home {
+		status = "disabled";
+	};
+};
+
 &mt6323_leds {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mediatek/mt7623n-rfb-emmc.dts
index bf67a8e9be59..34994f3f5a4b 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mediatek/mt7623n-rfb-emmc.dts
@@ -156,27 +156,25 @@
 	};
 };
 
-&eth {
+&gmac0 {
 	status = "okay";
+	phy-mode = "trgmii";
 
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "trgmii";
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-			pause;
-		};
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
 	};
+};
 
-	mac@1 {
-		compatible = "mediatek,eth-mac";
-		reg = <1>;
-		phy-mode = "rgmii";
-		phy-handle = <&phy5>;
-	};
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy5>;
+};
+
+&eth {
+	status = "okay";
 
 	mdio-bus {
 		#address-cells = <1>;
@@ -187,9 +185,9 @@
 			phy-mode = "rgmii-rxid";
 		};
 
-		switch@0 {
+		switch@1f {
 			compatible = "mediatek,mt7530";
-			reg = <0>;
+			reg = <0x1f>;
 			reset-gpios = <&pio 33 0>;
 			core-supply = <&mt6323_vpa_reg>;
 			io-supply = <&mt6323_vemc3v3_reg>;
@@ -232,6 +230,7 @@
 					fixed-link {
 						speed = <1000>;
 						full-duplex;
+						pause;
 					};
 				};
 			};
diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mediatek/mt7623n.dtsi
index 3adab5cd1fef..3e5cabf19cde 100644
--- a/arch/arm/boot/dts/mt7623n.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt7623n.dtsi
@@ -116,8 +116,8 @@
 			     "mediatek,mt2701-jpgdec";
 		reg = <0 0x15004000 0 0x1000>;
 		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
-		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
-			  <&imgsys CLK_IMG_JPGDEC>;
+		clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+			 <&imgsys CLK_IMG_JPGDEC>;
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mediatek/mt7629-rfb.dts
index 84e14bee7235..f24ebc20732a 100644
--- a/arch/arm/boot/dts/mt7629-rfb.dts
+++ b/arch/arm/boot/dts/mediatek/mt7629-rfb.dts
@@ -168,7 +168,7 @@
 	i2c_pins: i2c-pins {
 		mux {
 			function = "i2c";
-			groups =  "i2c_0";
+			groups = "i2c_0";
 		};
 
 		conf {
diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mediatek/mt7629.dtsi
index 46fc236e1b89..acab0883a3bb 100644
--- a/arch/arm/boot/dts/mt7629.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt7629.dtsi
@@ -106,8 +106,7 @@
 			compatible = "mediatek,mt7629-timer",
 				     "mediatek,mt6765-timer";
 			reg = <0x10009000 0x60>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk20m>;
 			clock-names = "clk20m";
 		};
diff --git a/arch/arm/boot/dts/mt8127-moose.dts b/arch/arm/boot/dts/mediatek/mt8127-moose.dts
index 560687af87dc..560687af87dc 100644
--- a/arch/arm/boot/dts/mt8127-moose.dts
+++ b/arch/arm/boot/dts/mediatek/mt8127-moose.dts
diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mediatek/mt8127.dtsi
index aced173c2a52..aced173c2a52 100644
--- a/arch/arm/boot/dts/mt8127.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt8127.dtsi
diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mediatek/mt8135-evbp1.dts
index f6147fe62f41..f6147fe62f41 100644
--- a/arch/arm/boot/dts/mt8135-evbp1.dts
+++ b/arch/arm/boot/dts/mediatek/mt8135-evbp1.dts
diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mediatek/mt8135.dtsi
index a031b3636318..0f291ad22d3a 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt8135.dtsi
@@ -152,7 +152,6 @@
 			compatible = "mediatek,mt8135-pinctrl";
 			reg = <0 0x1000b000 0 0x1000>;
 			mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>;
-			pins-are-numbered;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts
deleted file mode 100644
index 98e1c94c0261..000000000000
--- a/arch/arm/boot/dts/meson6-atv1200.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2014 Carlo Caione <carlo@caione.org>
- */
-
-/dts-v1/;
-#include "meson6.dtsi"
-
-/ {
-	model = "Geniatech ATV1200";
-	compatible = "geniatech,atv1200", "amlogic,meson6";
-
-	aliases {
-		serial0 = &uart_AO;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-};
-
-&uart_AO {
-	status = "okay";
-};
-
-&ethmac {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
deleted file mode 100644
index 4716030a48d0..000000000000
--- a/arch/arm/boot/dts/meson6.dtsi
+++ /dev/null
@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2014 Carlo Caione <carlo@caione.org>
- */
-
-#include "meson.dtsi"
-
-/ {
-	model = "Amlogic Meson6 SoC";
-	compatible = "amlogic,meson6";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@200 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x200>;
-		};
-
-		cpu@201 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x201>;
-		};
-	};
-
-	apb2: bus@d0000000 {
-		compatible = "simple-bus";
-		reg = <0xd0000000 0x40000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0xd0000000 0x40000>;
-	};
-
-	clk81: clk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <200000000>;
-	};
-}; /* end of / */
-
-&efuse {
-	status = "disabled";
-};
-
-&timer_abcde {
-	clocks = <&xtal>, <&clk81>;
-	clock-names = "xtal", "pclk";
-};
-
-&uart_AO {
-	clocks = <&xtal>, <&clk81>, <&clk81>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_A {
-	clocks = <&xtal>, <&clk81>, <&clk81>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_B {
-	clocks = <&xtal>, <&clk81>, <&clk81>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_C {
-	clocks = <&xtal>, <&clk81>, <&clk81>;
-	clock-names = "xtal", "pclk", "baud";
-};
diff --git a/arch/arm/boot/dts/microchip/Makefile b/arch/arm/boot/dts/microchip/Makefile
new file mode 100644
index 000000000000..79cd38fdc7da
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/Makefile
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+# Enables support for device-tree overlays
+DTC_FLAGS_at91-sam9x60_curiosity := -@
+DTC_FLAGS_at91-sam9x60ek := -@
+DTC_FLAGS_at91-sam9x75_curiosity := -@
+DTC_FLAGS_at91-sama5d27_som1_ek := -@
+DTC_FLAGS_at91-sama5d27_wlsom1_ek := -@
+DTC_FLAGS_at91-sama5d29_curiosity := -@
+DTC_FLAGS_at91-sama5d2_icp := -@
+DTC_FLAGS_at91-sama5d2_ptc_ek := -@
+DTC_FLAGS_at91-sama5d2_xplained := -@
+DTC_FLAGS_at91-sama5d3_eds := -@
+DTC_FLAGS_at91-sama5d3_xplained := -@
+DTC_FLAGS_at91-sama5d4_xplained := -@
+DTC_FLAGS_at91-sama7d65_curiosity := -@
+DTC_FLAGS_at91-sama7g54_curiosity := -@
+DTC_FLAGS_at91-sama7g5ek := -@
+dtb-$(CONFIG_SOC_AT91RM9200) += \
+	at91rm9200ek.dtb \
+	mpa1600.dtb
+dtb-$(CONFIG_SOC_AT91SAM9) += \
+	animeo_ip.dtb \
+	at91-qil_a9260.dtb \
+	aks-cdu.dtb \
+	ethernut5.dtb \
+	evk-pro3.dtb \
+	tny_a9260.dtb \
+	usb_a9260.dtb \
+	at91sam9260ek.dtb \
+	at91sam9261ek.dtb \
+	at91sam9263ek.dtb \
+	at91-sam9_l9260.dtb \
+	tny_a9263.dtb \
+	usb_a9263.dtb \
+	at91-foxg20.dtb \
+	at91-kizbox.dtb \
+	at91-lmu5000.dtb \
+	at91sam9g20ek.dtb \
+	at91sam9g20ek_2mmc.dtb \
+	tny_a9g20.dtb \
+	usb_a9g20.dtb \
+	usb_a9g20_lpw.dtb \
+	at91sam9m10g45ek.dtb \
+	pm9g45.dtb \
+	at91sam9n12ek.dtb \
+	at91sam9rlek.dtb \
+	at91-ariag25.dtb \
+	at91-ariettag25.dtb \
+	at91-cosino_mega2560.dtb \
+	at91-kizboxmini-base.dtb \
+	at91-kizboxmini-mb.dtb \
+	at91-kizboxmini-rd.dtb \
+	at91-q5xr5.dtb \
+	at91-smartkiz.dtb \
+	at91-wb45n.dtb \
+	at91sam9g15ek.dtb \
+	at91sam9g25-gardena-smart-gateway.dtb \
+	at91sam9g25ek.dtb \
+	at91sam9g35ek.dtb \
+	at91sam9x25ek.dtb \
+	at91sam9x35ek.dtb
+dtb-$(CONFIG_SOC_SAM9X60) += \
+	at91-sam9x60_curiosity.dtb \
+	at91-sam9x60ek.dtb
+dtb-$(CONFIG_SOC_SAM9X7) += \
+	at91-sam9x75_curiosity.dtb
+dtb-$(CONFIG_SOC_SAM_V7) += \
+	at91-kizbox2-2.dtb \
+	at91-kizbox3-hs.dtb \
+	at91-nattis-2-natte-2.dtb \
+	at91-sama5d27_som1_ek.dtb \
+	at91-sama5d27_wlsom1_ek.dtb \
+	at91-sama5d29_curiosity.dtb \
+	at91-sama5d2_icp.dtb \
+	at91-sama5d2_ptc_ek.dtb \
+	at91-sama5d2_xplained.dtb \
+	at91-sama5d3_eds.dtb \
+	at91-sama5d3_ksz9477_evb.dtb \
+	at91-sama5d3_xplained.dtb \
+	at91-dvk_som60.dtb \
+	at91-gatwick.dtb \
+	at91-tse850-3.dtb \
+	at91-wb50n.dtb \
+	sama5d31ek.dtb \
+	sama5d33ek.dtb \
+	sama5d34ek.dtb \
+	sama5d35ek.dtb \
+	sama5d36ek.dtb \
+	sama5d36ek_cmp.dtb \
+	at91-sama5d4_ma5d4evk.dtb \
+	at91-sama5d4_xplained.dtb \
+	at91-sama5d4ek.dtb \
+	at91-vinco.dtb
+dtb-$(CONFIG_SOC_SAMA7D65) += \
+	at91-sama7d65_curiosity.dtb
+dtb-$(CONFIG_SOC_SAMA7G5) += \
+	at91-sama7g54_curiosity.dtb \
+	at91-sama7g5ek.dtb
+
+dtb-$(CONFIG_SOC_LAN966) += \
+	lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \
+	lan966x-kontron-kswitch-d10-mmt-8g.dtb \
+	lan966x-pcb8290.dtb \
+	lan966x-pcb8291.dtb \
+	lan966x-pcb8309.dtb
diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/microchip/aks-cdu.dts
index 742fcf525e1b..302cb872efa1 100644
--- a/arch/arm/boot/dts/aks-cdu.dts
+++ b/arch/arm/boot/dts/microchip/aks-cdu.dts
@@ -56,7 +56,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -98,23 +98,27 @@
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led-red {
+			label = "red";
 			gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "none";
 		};
 
-		green {
+		led-green {
+			label = "green";
 			gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
-		yellow {
+		led-yellow {
+			label = "yellow";
 			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		blue {
+		led-blue {
+			label = "blue";
 			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/microchip/animeo_ip.dts
index 29936bfbeeb7..c11f4f7dac94 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/microchip/animeo_ip.dts
@@ -136,7 +136,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
 			status = "okay";
@@ -146,23 +146,23 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power_green {
+		led-power-green {
 			label = "power_green";
 			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		power_red {
+		led-power-red {
 			label = "power_red";
 			gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		tx_green {
+		led-tx-green {
 			label = "tx_green";
 			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
 		};
 
-		tx_red {
+		led-tx-red {
 			label = "tx_red";
 			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/microchip/at91-ariag25.dts
index 713d18f80356..713d18f80356 100644
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ b/arch/arm/boot/dts/microchip/at91-ariag25.dts
diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/microchip/at91-ariettag25.dts
index 2c52a71752c2..2c52a71752c2 100644
--- a/arch/arm/boot/dts/at91-ariettag25.dts
+++ b/arch/arm/boot/dts/microchip/at91-ariettag25.dts
diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/microchip/at91-cosino.dtsi
index ee0f5da6d819..ee0f5da6d819 100644
--- a/arch/arm/boot/dts/at91-cosino.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-cosino.dtsi
diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/microchip/at91-cosino_mega2560.dts
index 04cb7bee937d..04cb7bee937d 100644
--- a/arch/arm/boot/dts/at91-cosino_mega2560.dts
+++ b/arch/arm/boot/dts/microchip/at91-cosino_mega2560.dts
diff --git a/arch/arm/boot/dts/at91-dvk_som60.dts b/arch/arm/boot/dts/microchip/at91-dvk_som60.dts
index ededd5b0d27b..ededd5b0d27b 100644
--- a/arch/arm/boot/dts/at91-dvk_som60.dts
+++ b/arch/arm/boot/dts/microchip/at91-dvk_som60.dts
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/microchip/at91-dvk_su60_somc.dtsi
index 3542ad8a243e..3542ad8a243e 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-dvk_su60_somc.dtsi
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/microchip/at91-dvk_su60_somc_lcm.dtsi
index bea920b192b6..bea920b192b6 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-dvk_su60_somc_lcm.dtsi
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/microchip/at91-foxg20.dts
index 9dfd5de808d1..8e9e87665045 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/microchip/at91-foxg20.dts
@@ -131,7 +131,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/microchip/at91-gatwick.dts
index 2c718cf84d7b..551300fd7746 100644
--- a/arch/arm/boot/dts/at91-gatwick.dts
+++ b/arch/arm/boot/dts/microchip/at91-gatwick.dts
@@ -31,37 +31,37 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ethernet {
+		led-ethernet {
 			label = "gatwick:yellow:ethernet";
 			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		wifi {
+		led-wifi {
 			label = "gatwick:green:wifi";
 			gpios = <&pioA 28 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		ble {
+		led-ble {
 			label = "gatwick:blue:ble";
 			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		lora {
+		led-lora {
 			label = "gatwick:orange:lora";
 			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		blank {
+		led-blank {
 			label = "gatwick:green:blank";
 			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		user {
+		led-user {
 			label = "gatwick:yellow:user";
 			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
 			default-state = "off";
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/microchip/at91-kizbox.dts
index 307663b4eec2..307663b4eec2 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/microchip/at91-kizbox.dts
diff --git a/arch/arm/boot/dts/at91-kizbox2-2.dts b/arch/arm/boot/dts/microchip/at91-kizbox2-2.dts
index cab8b3579efa..cab8b3579efa 100644
--- a/arch/arm/boot/dts/at91-kizbox2-2.dts
+++ b/arch/arm/boot/dts/microchip/at91-kizbox2-2.dts
diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi
index e5e21dff882f..a44d92305dbb 100644
--- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi
@@ -85,7 +85,7 @@
 &i2c1 {
 	status = "okay";
 
-	pmic: act8865@5b {
+	act8865: pmic@5b {
 		compatible = "active-semi,act8865";
 		reg = <0x5b>;
 		status = "okay";
diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts
index 7075df6549e9..fec7269088d1 100644
--- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
+++ b/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts
@@ -225,7 +225,7 @@
 		pinctrl_pio_io_reset: gpio_io_reset {
 			pinmux = <PIN_PB30__GPIO>;
 			bias-disable;
-			drive-open-drain = <1>;
+			drive-open-drain;
 			output-low;
 		};
 		pinctrl_pio_input: gpio_input {
diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi
index abe27adfa4d6..465664628419 100644
--- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi
@@ -211,7 +211,7 @@
 		pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
 		<PIN_PD13__FLEXCOM4_IO1>; //CLK
 		bias-disable;
-		drive-open-drain = <1>;
+		drive-open-drain;
 	};
 
 	pinctrl_pwm0 {
diff --git a/arch/arm/boot/dts/at91-kizboxmini-base.dts b/arch/arm/boot/dts/microchip/at91-kizboxmini-base.dts
index 81c29ca5cc1b..81c29ca5cc1b 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-base.dts
+++ b/arch/arm/boot/dts/microchip/at91-kizboxmini-base.dts
diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/microchip/at91-kizboxmini-common.dtsi
index 42640fe6b6d0..42640fe6b6d0 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-kizboxmini-common.dtsi
diff --git a/arch/arm/boot/dts/at91-kizboxmini-mb.dts b/arch/arm/boot/dts/microchip/at91-kizboxmini-mb.dts
index c07d3076a9bc..c07d3076a9bc 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-mb.dts
+++ b/arch/arm/boot/dts/microchip/at91-kizboxmini-mb.dts
diff --git a/arch/arm/boot/dts/at91-kizboxmini-rd.dts b/arch/arm/boot/dts/microchip/at91-kizboxmini-rd.dts
index ab50f4d22387..ab50f4d22387 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-rd.dts
+++ b/arch/arm/boot/dts/microchip/at91-kizboxmini-rd.dts
diff --git a/arch/arm/boot/dts/at91-linea.dtsi b/arch/arm/boot/dts/microchip/at91-linea.dtsi
index 533a440d5583..533a440d5583 100644
--- a/arch/arm/boot/dts/at91-linea.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-linea.dtsi
diff --git a/arch/arm/boot/dts/at91-lmu5000.dts b/arch/arm/boot/dts/microchip/at91-lmu5000.dts
index f8863d7c0798..f8863d7c0798 100644
--- a/arch/arm/boot/dts/at91-lmu5000.dts
+++ b/arch/arm/boot/dts/microchip/at91-lmu5000.dts
diff --git a/arch/arm/boot/dts/at91-natte.dtsi b/arch/arm/boot/dts/microchip/at91-natte.dtsi
index 49f0a0c46cde..49f0a0c46cde 100644
--- a/arch/arm/boot/dts/at91-natte.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-natte.dtsi
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts
index f71377c9b757..f71377c9b757 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts
diff --git a/arch/arm/boot/dts/at91-q5xr5.dts b/arch/arm/boot/dts/microchip/at91-q5xr5.dts
index 9cf60b6f695c..9cf60b6f695c 100644
--- a/arch/arm/boot/dts/at91-q5xr5.dts
+++ b/arch/arm/boot/dts/microchip/at91-q5xr5.dts
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/microchip/at91-qil_a9260.dts
index 9d26f9996348..892dbd8dbbed 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/microchip/at91-qil_a9260.dts
@@ -108,13 +108,13 @@
 				status = "okay";
 			};
 
-			shdwc@fffffd10 {
+			shdwc: poweroff@fffffd10 {
 				atmel,wakeup-counter = <10>;
 				atmel,wakeup-rtt-timer;
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts
index 2fb51b9aca2a..49dc1a4ccb36 100644
--- a/arch/arm/boot/dts/at91-sam9_l9260.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts
@@ -105,7 +105,7 @@
 			status = "okay";
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
new file mode 100644
index 000000000000..b9ffd9e5faac
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
@@ -0,0 +1,508 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60_curiosity.dts - Device Tree file for Microchip SAM9X60 Curiosity board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Durai Manickam KR <durai.manickamkr@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAM9X60 Curiosity";
+	compatible = "microchip,sam9x60-curiosity", "microchip,sam9x60", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c6;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-user {
+			label = "PB_USER";
+			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-red {
+			label = "red";
+			gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioD 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+
+	vdd_1v8: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VDD_1V8";
+	};
+
+	vdd_1v15: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1150000>;
+		regulator-min-microvolt = <1150000>;
+		regulator-name = "VDD_1V15";
+	};
+
+	vdd1_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD1_3V3";
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd1_3v3>;
+	vref-supply = <&vdd1_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_rx_tx>;
+	status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_rx_tx>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu>;
+	status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_lsb>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0xc0000>;
+				};
+
+				ubootenvred@100000 {
+					label = "U-Boot Env Redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				ubootenv@140000 {
+					label = "U-Boot Env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c0: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+			pagesize = <16>;
+		};
+	};
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c6: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx6_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "disabled";
+	};
+};
+
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx7_default>;
+		status = "okay";
+	};
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_rmii>;
+	status = "okay";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioB>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl {
+	adc {
+		pinctrl_adc_default: adc-default {
+			atmel,pins = <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_adtrg_default: adtrg-default {
+			atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	can0 {
+		pinctrl_can0_rx_tx: can0-rx-tx {
+			atmel,pins =
+				<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0 */
+				 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX0 */
+				 AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	can1 {
+		pinctrl_can1_rx_tx: can1-rx-tx {
+			atmel,pins =
+				<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1 */
+				 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX1 */
+				 AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu: dbgu-0 {
+			atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				      AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	ebi {
+		pinctrl_ebi_data_lsb: ebi-data-lsb {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_ebi_addr_nand: ebi-addr-nand {
+			atmel,pins =
+				<AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx0_default: flx0-twi {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx6_default: flx6-twi {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx7_default: flx7-usart {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
+				 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+		};
+	};
+
+	gpio-keys {
+		pinctrl_key_gpio_default: pinctrl-key-gpio {
+			atmel,pins = <AT91_PIOA 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	leds {
+		pinctrl_gpio_leds: gpio-leds {
+			atmel,pins = <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	macb0 {
+		pinctrl_macb0_rmii: macb0-rmii-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+				 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+				 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE	/* PB8 IRQ GPIO */
+				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+		};
+	};
+
+	nand {
+		pinctrl_nand_oe_we: nand-oe-we-0 {
+			atmel,pins =
+				<AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_nand_rb: nand-rb-0 {
+			atmel,pins =
+				<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_nand_cs: nand-cs-0 {
+			atmel,pins =
+				<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	pwm0 {
+		pinctrl_pwm0_0: pwm0-0 {
+			atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_1: pwm0-1 {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_2: pwm0-2 {
+			atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0 {
+			atmel,pins =
+				<AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA17 CK  periph A with pullup */
+				 AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA16 CMD periph A with pullup */
+				 AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA15 DAT0 periph A */
+				 AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA18 DAT1 periph A with pullup */
+				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
+				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
+		};
+
+		pinctrl_sdmmc0_cd: sdmmc0-cd {
+			atmel,pins =
+				<AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc1 {
+		pinctrl_sdmmc1_default: sdmmc1 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA13 CK periph B */
+				 AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA12 CMD periph B with pullup */
+				 AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA11 DAT0 periph B with pullup */
+				 AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA2 DAT1 periph B with pullup */
+				 AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA3 DAT2 periph B with pullup */
+				 AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA4 DAT3 periph B with pullup */
+		};
+	};
+
+	usb0 {
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins = <AT91_PIOA 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb1 {
+		pinctrl_usb_default: usb-default {
+			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+}; /* pinctrl */
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2>;
+	status = "okay";
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
+	cd-gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	disable-wp;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA 27 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioD 18 GPIO_ACTIVE_HIGH
+			   &pioD 15 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
index 81c38e101f58..c1ff3248bd8f 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
@@ -16,8 +16,8 @@
 
 	aliases {
 		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		serial1 = &uart1;
+		i2c1 = &i2c6;
+		serial1 = &uart5;
 	};
 
 	chosen {
@@ -34,48 +34,6 @@
 		};
 	};
 
-	regulators: regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_1v8: fixed-regulator-vdd_1v8@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "VDD_1V8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			status = "okay";
-		};
-
-		vdd_1v15: fixed-regulator-vdd_1v15@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "VDD_1V15";
-			regulator-min-microvolt = <1150000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-always-on;
-			status = "okay";
-		};
-
-		vdd1_3v3: fixed-regulator-vdd1_3v3@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "VDD1_3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			status = "okay";
-		};
-
-		vdd2_3v3: regulator-fixed-vdd2_3v3@3 {
-			compatible = "regulator-fixed";
-			regulator-name = "VDD2_3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			status = "okay";
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -95,22 +53,54 @@
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay"; /* Conflict with pwm0. */
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioB 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioB 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioB 13 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	vdd_1v8: fixed-regulator-vdd_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v15: fixed-regulator-vdd_1v15 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-always-on;
+	};
+
+	vdd1_3v3: fixed-regulator-vdd1_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD1_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd2_3v3: regulator-fixed-vdd2_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD2_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &adc {
@@ -217,15 +207,9 @@
 	status = "okay";
 
 	i2c0: i2c@600 {
-		compatible = "microchip,sam9x60-i2c";
-		reg = <0x600 0x200>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+		dmas = <0>, <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx0_default>;
-		atmel,fifo-size = <16>;
 		i2c-analog-filter;
 		i2c-digital-filter;
 		i2c-digital-filter-width-ns = <35>;
@@ -244,17 +228,10 @@
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
 	status = "disabled";
 
-	spi0: spi@400 {
-		compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
-		reg = <0x400 0x200>;
-		interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
-		clock-names = "spi_clk";
+	spi4: spi@400 {
+		dmas = <0>, <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx4_default>;
-		atmel,fifo-size = <16>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		status = "disabled";
 	};
 };
@@ -263,23 +240,9 @@
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
 	status = "okay";
 
-	uart1: serial@200 {
-		compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
-		reg = <0x200 0x200>;
-		interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(10))>,
-		       <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(11))>;
-		dma-names = "tx", "rx";
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
-		clock-names = "usart";
-		pinctrl-0 = <&pinctrl_flx5_default>;
+	uart5: serial@200 {
 		pinctrl-names = "default";
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
+		pinctrl-0 = <&pinctrl_flx5_default>;
 		status = "okay";
 	};
 };
@@ -288,21 +251,46 @@
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
 	status = "okay";
 
-	i2c1: i2c@600 {
-		compatible = "microchip,sam9x60-i2c";
-		reg = <0x600 0x200>;
-		interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+	i2c6: i2c@600 {
+		dmas = <0>, <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx6_default>;
-		atmel,fifo-size = <16>;
 		i2c-analog-filter;
 		i2c-digital-filter;
 		i2c-digital-filter-width-ns = <35>;
 		status = "okay";
 
+		power-monitor@17 {
+			compatible = "microchip,pac1934";
+			reg = <0x17>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@1 {
+				reg = <0x1>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDIOM";
+			};
+
+			channel@2 {
+				reg = <0x2>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDCORE";
+			};
+
+			channel@3 {
+				reg = <0x3>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3_MPU";
+			};
+
+			channel@4 {
+				reg = <0x4>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3";
+			};
+		};
+
 		gpio_exp: mcp23008@20 {
 			compatible = "microchip,mcp23008";
 			reg = <0x20>;
@@ -331,6 +319,8 @@
 
 	ethernet-phy@0 {
 		reg = <0x0>;
+		interrupt-parent = <&pioB>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -448,7 +438,7 @@
 				 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 		};
 
-		pinctrl_flx5_default: flx_uart {
+		pinctrl_flx5_default: flx5_uart {
 			atmel,pins =
 				<AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE
 				 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
@@ -504,6 +494,7 @@
 				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
 				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
 				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE	/* PB8 IRQ GPIO */
 				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
 				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
 		};
@@ -617,7 +608,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <80000000>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-delay-ns = <7>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		m25p,fast-read;
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
new file mode 100644
index 000000000000..1a6a909a5043
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x75_curiosity.dts - Device Tree file for Microchip SAM9X75 Curiosity board
+ *
+ * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Varshini Rajendran <varshini.rajendran@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x7.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAM9X75 Curiosity";
+	compatible = "microchip,sam9x75-curiosity", "microchip,sam9x7", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c6;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-user {
+			label = "USER";
+			gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_0>;
+			wakeup-source;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+
+		led_red: led-red {
+			label = "red";
+			gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&pinctrl_red_led_gpio_default>;
+		};
+
+		led_green: led-green {
+			label = "green";
+			gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&pinctrl_green_led_gpio_default>;
+		};
+
+		led_blue: led-blue {
+			label = "blue";
+			gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&pinctrl_blue_led_gpio_default>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+		device_type = "memory";
+	};
+};
+
+&classd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_classd_default>;
+	atmel,pwm-type = "diff";
+	atmel,non-overlap-time = <10>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu_default>;
+	status = "okay";
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flx6_default>;
+	i2c-analog-filter;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	status = "okay";
+
+	pmic@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-mode = <4>;
+				};
+			};
+
+			vddioddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddcore: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-mode = <4>;
+				};
+			};
+
+			dcdc4: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-mode = <4>;
+				};
+			};
+
+			vldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+};
+
+&i2c7 {
+	dmas = <0>, <0>;
+	i2c-analog-filter;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flx7_default>;
+	status = "okay";
+
+	power-monitor@10 {
+		compatible = "microchip,pac1934";
+		reg = <0x10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <0x1>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDD3V3";
+		};
+
+		channel@2 {
+			reg = <0x2>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "DCDC4";
+		};
+
+		channel@3 {
+			reg = <0x3>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDDCORE";
+		};
+
+		channel@4 {
+			reg = <0x4>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDDIODDR";
+		};
+	};
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s_default>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
+&pinctrl {
+	classd {
+		pinctrl_classd_default: classd-default {
+			atmel,pins =
+				<AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN>;
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu_default: dbgu-default {
+			atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				     <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx6_default: flx6-default {
+			atmel,pins =
+				<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx7_default: flx7-default {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	gpio-keys {
+		pinctrl_key_gpio_default: key-gpio-default {
+			atmel,pins = <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	i2s {
+		pinctrl_i2s_default: i2s-default {
+			atmel,pins =
+				<AT91_PIOB 26 AT91_PERIPH_D AT91_PINCTRL_NONE>,		/* I2SCK */
+				<AT91_PIOB 15 AT91_PERIPH_D AT91_PINCTRL_NONE>,		/* I2SWS */
+				<AT91_PIOB 16 AT91_PERIPH_D AT91_PINCTRL_NONE>,		/* I2SDIN */
+				<AT91_PIOB 17 AT91_PERIPH_D AT91_PINCTRL_NONE>,		/* I2SDOUT */
+				<AT91_PIOB 25 AT91_PERIPH_D AT91_PINCTRL_NONE>;		/* I2SMCK */
+		};
+	};
+
+	led-controller {
+		pinctrl_red_led_gpio_default: red-led-gpio-default {
+			atmel,pins = <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_green_led_gpio_default: green-led-gpio-default {
+			atmel,pins = <AT91_PIOC 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_blue_led_gpio_default: blue-led-gpio-default {
+			atmel,pins = <AT91_PIOC 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0-default {
+			atmel,pins =
+				<AT91_PIOA 2 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,				/* PA2 CK  periph A with pullup */
+				<AT91_PIOA 1 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,	/* PA1 CMD periph A with pullup */
+				<AT91_PIOA 0 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,	/* PA0 DAT0 periph A */
+				<AT91_PIOA 3 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,	/* PA3 DAT1 periph A with pullup */
+				<AT91_PIOA 4 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,	/* PA4 DAT2 periph A with pullup */
+				<AT91_PIOA 5 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>;	/* PA5 DAT3 periph A with pullup */
+		};
+	};
+}; /* pinctrl */
+
+&poweroff {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	status = "okay";
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&tcb {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
index 8aa9e8dea337..13c28e92b17e 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
@@ -43,7 +43,8 @@
 					#size-cells = <1>;
 					compatible = "jedec,spi-nor";
 					reg = <0>;
-					spi-max-frequency = <80000000>;
+					spi-max-frequency = <104000000>;
+					spi-cs-setup-delay-ns = <7>;
 					spi-tx-bus-width = <4>;
 					spi-rx-bus-width = <4>;
 					m25p,fast-read;
@@ -105,7 +106,7 @@
 				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 
-				at24@50 {
+				eeprom@50 {
 					compatible = "atmel,24c02";
 					reg = <0x50>;
 					pagesize = <8>;
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
index 0dc6ca377b0c..45edf6214cf7 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
@@ -37,7 +37,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@400000 {
+		usb1: usb@400000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
 					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
@@ -48,13 +48,12 @@
 			status = "okay";
 		};
 
-		usb2: ehci@500000 {
+		usb2: usb@500000 {
 			status = "okay";
 		};
 
 		sdmmc0: sdio-host@a0000000 {
 			bus-width = <8>;
-			mmc-ddr-3_3v;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sdmmc0_default>;
 			status = "okay";
@@ -139,7 +138,7 @@
 				};
 			};
 
-			shdwc@f8048010 {
+			poweroff@f8048010 {
 				debounce-delay-us = <976>;
 				atmel,wakeup-rtc-timer;
 
@@ -498,17 +497,17 @@
 		pinctrl-0 = <&pinctrl_led_gpio_default>;
 		status = "okay"; /* Conflict with pwm0. */
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
index 76b2025c67b4..0417f53b3e96 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
@@ -31,6 +31,14 @@
 		};
 	};
 
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-wilc1000";
 		reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
@@ -67,17 +75,22 @@
 	scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	mcp16502@5b {
+	pmic@5b {
 		compatible = "microchip,mcp16502";
 		reg = <0x5b>;
+		lvin-supply = <&reg_5v>;
+		pvin1-supply = <&reg_5v>;
+		pvin2-supply = <&reg_5v>;
+		pvin3-supply = <&reg_5v>;
+		pvin4-supply = <&reg_5v>;
 		status = "okay";
 		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
 
 		regulators {
 			vdd_3v3: VDD_IO {
 				regulator-name = "VDD_IO";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -95,8 +108,8 @@
 
 			vddio_ddr: VDD_DDR {
 				regulator-name = "VDD_DDR";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1850000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -118,8 +131,8 @@
 
 			vdd_core: VDD_CORE {
 				regulator-name = "VDD_CORE";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1850000>;
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -160,8 +173,8 @@
 
 			LDO1 {
 				regulator-name = "LDO1";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 
 				regulator-state-standby {
@@ -175,9 +188,8 @@
 
 			LDO2 {
 				regulator-name = "LDO2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
-				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
 
 				regulator-state-standby {
 					regulator-on-in-suspend;
@@ -221,7 +233,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <80000000>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-delay-ns = <7>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
 		m25p,fast-read;
@@ -372,7 +385,7 @@
 
 	wilc: wifi@0 {
 		reg = <0>;
-		compatible = "microchip,wilc1000";
+		compatible = "microchip,wilc3000", "microchip,wilc1000";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_wilc_default>;
 		clocks = <&pmc PMC_TYPE_SYSTEM 9>;
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
index b665ddc6b0de..35a933eec573 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
@@ -46,17 +46,17 @@
 		pinctrl-0 = <&pinctrl_led_gpio_default>;
 		status = "okay";
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -197,7 +197,7 @@
 
 &sdmmc0 {
 	bus-width = <4>;
-	mmc-ddr-3_3v;
+	no-1-8-v;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
new file mode 100644
index 000000000000..7be215781549
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
@@ -0,0 +1,614 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d29_curiosity.dts - Device Tree file for SAMA5D29 Curiosity board
+ *
+ * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Mihai Sain <mihai.sain@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama5d29.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+	model = "Microchip SAMA5D29 Curiosity";
+	compatible = "microchip,sama5d29-curiosity", "atmel,sama5d29", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	// debug
+		serial1 = &uart1;	// RPi
+		serial2 = &uart3;	// mikro BUS 2
+		serial3 = &uart4;	// mikro BUS 1
+		serial4 = &uart6;	// flx1 Bluetooth
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "USER BUTTON";
+			gpios = <&pioA PIN_PA17 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_3v3>;
+	vref-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart6: serial@200 {
+		pinctrl-0 = <&pinctrl_flx1_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi6: spi@400 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rpi_spi>;
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	sda-gpios = <&pioA PIN_PB31 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PC0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	i2c-sda-hold-time-ns = <350>;
+	status = "okay";
+
+	pmic@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+		lvin-supply = <&reg_5v>;
+		pvin1-supply = <&reg_5v>;
+		pvin2-supply = <&reg_5v>;
+		pvin3-supply = <&reg_5v>;
+		pvin4-supply = <&reg_5v>;
+		status = "okay";
+		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddio_ddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_core: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_ddr: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	i2c-analog-filter;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pioA {
+	pinctrl_adc_default: adc-default {
+		pinmux = <PIN_PD25__GPIO>,
+			 <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_adtrg_default: adtrg-default {
+		pinmux = <PIN_PD31__ADTRG>;
+		bias-pull-up;
+	};
+
+	pinctrl_can0_default: can0-default {
+		pinmux = <PIN_PC10__CANTX0>,
+			 <PIN_PC11__CANRX0>;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1-default {
+		pinmux = <PIN_PC26__CANTX1>,
+			 <PIN_PC27__CANRX1>;
+		bias-disable;
+	};
+
+	pinctrl_debug_uart: debug-uart {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_flx1_default: flx1-default {
+		pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+			 <PIN_PA23__FLEXCOM1_IO1>,
+			 <PIN_PA25__FLEXCOM1_IO3>,
+			 <PIN_PA26__FLEXCOM1_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		pinmux = <PIN_PB31__TWD0>,
+			 <PIN_PC0__TWCK0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio-default {
+		pinmux = <PIN_PB31__GPIO>,
+			 <PIN_PC0__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		pinmux = <PIN_PD4__TWD1>,
+			 <PIN_PD5__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-default {
+		pinmux = <PIN_PD4__GPIO>,
+			 <PIN_PD5__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key-gpio-default {
+		pinmux = <PIN_PA17__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led-gpio-default {
+		pinmux = <PIN_PA7__GPIO>,
+			 <PIN_PA8__GPIO>,
+			 <PIN_PA9__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_mikrobus1_pwm: mikrobus1-pwm {
+		pinmux = <PIN_PA31__PWML0>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_pwm: mikrobus2-pwm {
+		pinmux = <PIN_PB0__PWMH1>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_uart: mikrobus1-uart {
+		pinmux = <PIN_PB3__URXD4>,
+			 <PIN_PB4__UTXD4>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_uart: mikrobus2-uart {
+		pinmux = <PIN_PB11__URXD3>,
+			 <PIN_PB12__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_qspi1_default: qspi1-default {
+		pinmux = <PIN_PB5__QSPI1_SCK>,
+			 <PIN_PB6__QSPI1_CS>,
+			 <PIN_PB7__QSPI1_IO0>,
+			 <PIN_PB8__QSPI1_IO1>,
+			 <PIN_PB9__QSPI1_IO2>,
+			 <PIN_PB10__QSPI1_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_rpi_spi: rpi-spi {
+		pinmux = <PIN_PD12__FLEXCOM4_IO0>,
+			 <PIN_PD13__FLEXCOM4_IO1>,
+			 <PIN_PD14__FLEXCOM4_IO2>,
+			 <PIN_PD15__FLEXCOM4_IO3>,
+			 <PIN_PD16__FLEXCOM4_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_rpi_uart: rpi-uart {
+		pinmux = <PIN_PD2__URXD1>,
+			 <PIN_PD3__UTXD1>;
+		bias-disable;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0-default {
+		pinmux = <PIN_PA0__SDMMC0_CK>,
+			 <PIN_PA1__SDMMC0_CMD>,
+			 <PIN_PA2__SDMMC0_DAT0>,
+			 <PIN_PA3__SDMMC0_DAT1>,
+			 <PIN_PA4__SDMMC0_DAT2>,
+			 <PIN_PA5__SDMMC0_DAT3>,
+			 <PIN_PA11__SDMMC0_VDDSEL>,
+			 <PIN_PA13__SDMMC0_CD>;
+		bias-disable;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1-default {
+		pinmux = <PIN_PA18__SDMMC1_DAT0>,
+			 <PIN_PA19__SDMMC1_DAT1>,
+			 <PIN_PA20__SDMMC1_DAT2>,
+			 <PIN_PA21__SDMMC1_DAT3>,
+			 <PIN_PA22__SDMMC1_CK>,
+			 <PIN_PA28__SDMMC1_CMD>,
+			 <PIN_PA30__SDMMC1_CD>;
+		bias-disable;
+	};
+
+	pinctrl_spi1_default: spi1-default {
+		pinmux = <PIN_PC1__SPI1_SPCK>,
+			 <PIN_PC2__SPI1_MOSI>,
+			 <PIN_PC3__SPI1_MISO>,
+			 <PIN_PC4__SPI1_NPCS0>,
+			 <PIN_PC5__SPI1_NPCS1>,
+			 <PIN_PC6__SPI1_NPCS2>,
+			 <PIN_PC7__SPI1_NPCS3>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb-default {
+		pinmux = <PIN_PA6__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_usba_vbus: usba-vbus {
+		pinmux = <PIN_PB13__GPIO>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
+	status = "okay";
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+		label = "atmel_qspi1";
+		status = "okay";
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	disable-wp;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	disable-wp;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_debug_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rpi_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus2_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA PIN_PB13 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioA PIN_PA6 GPIO_ACTIVE_HIGH
+			   0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
index 6865be8d7787..fbae6a9af6c3 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
@@ -62,22 +62,30 @@
 		pinctrl-0 = <&pinctrl_led_gpio_default>;
 		status = "okay"; /* conflict with pwm0 */
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_MAIN_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 };
 
 &adc {
@@ -187,17 +195,53 @@
 		i2c-digital-filter-width-ns = <35>;
 		status = "okay";
 
-		mcp16502@5b {
+		power-monitor@10 {
+			compatible = "microchip,pac1934";
+			reg = <0x10>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@1 {
+				reg = <0x1>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3_1";
+			};
+
+			channel@2 {
+				reg = <0x2>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3_2";
+			};
+
+			channel@3 {
+				reg = <0x3>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDCORE";
+			};
+
+			channel@4 {
+				reg = <0x4>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDIODDR";
+			};
+		};
+
+		pmic@5b {
 			compatible = "microchip,mcp16502";
 			reg = <0x5b>;
+			lvin-supply = <&reg_5v>;
+			pvin1-supply = <&reg_5v>;
+			pvin2-supply = <&reg_5v>;
+			pvin3-supply = <&reg_5v>;
+			pvin4-supply = <&reg_5v>;
 			status = "okay";
 			lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>;
 
 			regulators {
 				vdd_io_reg: VDD_IO {
 					regulator-name = "VDD_IO";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -215,8 +259,8 @@
 
 				VDD_DDR {
 					regulator-name = "VDD_DDR";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -234,8 +278,8 @@
 
 				VDD_CORE {
 					regulator-name = "VDD_CORE";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -257,7 +301,6 @@
 					regulator-max-microvolt = <1850000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
-					regulator-always-on;
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
@@ -272,8 +315,8 @@
 
 				LDO1 {
 					regulator-name = "LDO1";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
 					regulator-always-on;
 
 					regulator-state-standby {
@@ -287,8 +330,8 @@
 
 				LDO2 {
 					regulator-name = "LDO2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 
 					regulator-state-standby {
@@ -670,7 +713,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <80000000>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-delay-ns = <7>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		m25p,fast-read;
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
index 76a711b167b0..10d69f6957cf 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
@@ -47,7 +47,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@400000 {
+		usb1: usb@400000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioA PIN_PB12 GPIO_ACTIVE_HIGH
@@ -58,7 +58,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@500000 {
+		usb2: usb@500000 {
 			status = "okay";
 		};
 
@@ -204,7 +204,7 @@
 				};
 			};
 
-			shdwc@f8048010 {
+			poweroff@f8048010 {
 				debounce-delay-us = <976>;
 
 				input@0 {
@@ -231,7 +231,7 @@
 				scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 
-				at24@50 {
+				eeprom@50 {
 					compatible = "atmel,24c02";
 					reg = <0x50>;
 					pagesize = <8>;
@@ -416,17 +416,17 @@
 		pinctrl-0 = <&pinctrl_led_gpio_default>;
 		status = "okay";
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
index 85949c24b687..7e77a55ed41d 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
@@ -46,7 +46,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@400000 {
+		usb1: usb@400000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
 					   &pioA PIN_PB10 GPIO_ACTIVE_HIGH
@@ -57,7 +57,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@500000 {
+		usb2: usb@500000 {
 			status = "okay";
 		};
 
@@ -348,7 +348,7 @@
 				};
 			};
 
-			shdwc@f8048010 {
+			poweroff@f8048010 {
 				debounce-delay-us = <976>;
 				atmel,wakeup-rtc-timer;
 
@@ -411,7 +411,7 @@
 				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 
-				at24@54 {
+				eeprom@54 {
 					compatible = "atmel,24c02";
 					reg = <0x54>;
 					pagesize = <16>;
@@ -725,18 +725,18 @@
 		pinctrl-0 = <&pinctrl_led_gpio_default>;
 		status = "okay"; /* conflict with pwm0 */
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
 		};
 
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_eds.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_eds.dts
new file mode 100644
index 000000000000..c287b03d768b
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d3_eds.dts
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * at91-sama5d3_eds.dts - Device Tree file for the SAMA5D3 Ethernet
+ *    Development System board.
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Jerry Ray <jerry.ray@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "SAMA5D3 Ethernet Development System";
+	compatible = "microchip,sama5d3-eds", "atmel,sama5d36",
+		     "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		button-3 {
+			label = "PB_USER";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			wakeup-source;
+		};
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	vcc_3v3_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vcc_2v5_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+
+	vcc_1v8_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+
+	vcc_1v2_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	vcc_mmc0_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc0-card-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nand_controller: nand-controller {
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x2>;
+			atmel,rb = <0>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				bootloader@40000 {
+					label = "bootloader";
+					reg = <0x40000 0xc0000>;
+				};
+
+				bootloaderenvred@100000 {
+					label = "bootloader env redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				bootloaderenv@140000 {
+					label = "bootloader env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x0f800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_pu>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&pinctrl_i2c2_pu>;
+	status = "okay";
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&mmc0 {
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+	vmmc-supply = <&vcc_mmc0_reg>;
+	vqmmc-supply = <&vcc_3v3_reg>;
+	status = "okay";
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+		cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_i2c0_pu: i2c0-pu {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_i2c2_pu: i2c2-pu {
+			atmel,pins =
+				<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_key_gpio: key-gpio-0 {
+			atmel,pins =
+				<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_cd: mmc0-cd {
+			atmel,pins =
+				<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		/* Reserved for reset signal to the RGMII connector. */
+		pinctrl_rgmii_rstn: rgmii-rstn {
+			atmel,pins =
+				<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		/* Reserved for an interrupt line from the RMII and RGMII connectors. */
+		pinctrl_spi_irqn: spi-irqn {
+			atmel,pins =
+				<AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_spi0_cs: spi0-cs-default {
+			atmel,pins =
+				<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_cs: spi1-cs-default {
+			atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins =
+				<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_usb_default: usb-default {
+			atmel,pins =
+				<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		/* Reserved for VBUS fault interrupt. */
+		pinctrl_vbusfault_irqn: vbusfault-irqn {
+			atmel,pins =
+				<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_vcc_mmc0_reg_gpio: vcc-mmc0-reg-gpio-default {
+			atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&spi0 {
+	pinctrl-names = "default", "cs";
+	pinctrl-1 = <&pinctrl_spi0_cs>;
+	cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default", "cs";
+	pinctrl-1 = <&pinctrl_spi1_cs>;
+	cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioC 28 0>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {	/* USB Device port with VBUS detection. */
+	atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {	/* 3-port Host. First port is unused. */
+	atmel,vbus-gpio = <0
+			   &pioE 3 GPIO_ACTIVE_HIGH
+			   &pioE 4 GPIO_ACTIVE_HIGH
+			  >;
+	num-ports = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
index 14af1fd6d247..b66570080894 100644
--- a/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
@@ -152,6 +152,7 @@
 				label = "cpu";
 				ethernet = <&macb0>;
 				phy-mode = "rgmii-txid";
+				tx-internal-delay-ps = <2000>;
 
 				fixed-link {
 					speed = <1000>;
@@ -162,6 +163,18 @@
 	};
 };
 
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
 &usb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usba_vbus>;
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts
index 1f42a6a981bf..d2c43957497d 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts
@@ -87,7 +87,7 @@
 			i2c1: i2c@f0018000 {
 				status = "okay";
 
-				pmic: act8865@5b {
+				act8865: pmic@5b {
 					compatible = "active-semi,act8865";
 					reg = <0x5b>;
 					status = "disabled";
@@ -283,7 +283,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@600000 {
+		usb1: usb@600000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioE 3 GPIO_ACTIVE_LOW
@@ -294,7 +294,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@700000 {
+		usb2: usb@700000 {
 			status = "okay";
 		};
 
@@ -392,13 +392,13 @@
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay";
 
-		d2 {
+		led-d2 {
 			label = "d2";
 			gpios = <&pioE 23 GPIO_ACTIVE_LOW>;	/* PE23, conflicts with A23, CTS2 */
 			linux,default-trigger = "heartbeat";
 		};
 
-		d3 {
+		led-d3 {
 			label = "d3"; /* Conflict with EBI CS0, USART2 CTS. */
 			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4.dtsi
index fd1086f52b40..fd1086f52b40 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4.dtsi
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts
index 4d7cee569ff2..b9725e400501 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts
@@ -22,7 +22,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@500000 {
+		usb1: usb@500000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioE 11 GPIO_ACTIVE_LOW
@@ -31,7 +31,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@600000 {
+		usb2: usb@600000 {
 			status = "okay";
 		};
 
@@ -115,19 +115,19 @@
 		compatible = "gpio-leds";
 		status = "okay";
 
-		user1 {
+		led-user1 {
 			label = "user1";
 			gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		user2 {
+		led-user2 {
 			label = "user2";
 			gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		user3 {
+		led-user3 {
 			label = "user3";
 			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts
index f122f302f8e0..0ecccb9a809d 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts
@@ -164,7 +164,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@500000 {
+		usb1: usb@500000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioE 11 GPIO_ACTIVE_HIGH
@@ -175,7 +175,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@600000 {
+		usb2: usb@600000 {
 			status = "okay";
 		};
 
@@ -262,13 +262,13 @@
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay";
 
-		d8 {
+		led-d8 {
 			label = "d8";
 			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		d10 {
+		led-d10 {
 			label = "d10";
 			gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts
index fce4e93c6bee..69107d6cd26c 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts
@@ -198,7 +198,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@500000 {
+		usb1: usb@500000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
 					   &pioE 11 GPIO_ACTIVE_LOW
@@ -207,7 +207,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@600000 {
+		usb2: usb@600000 {
 			status = "okay";
 		};
 
@@ -287,18 +287,18 @@
 		compatible = "gpio-leds";
 		status = "okay";
 
-		d8 {
+		led-d8 {
 			label = "d8";
 			/* PE28, conflicts with usart4 rts pin */
 			gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
 		};
 
-		d9 {
+		led-d9 {
 			label = "d9";
 			gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		d10 {
+		led-d10 {
 			label = "d10";
 			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
new file mode 100644
index 000000000000..927c27260b6c
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
@@ -0,0 +1,459 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  at91-sama7d65_curiosity.dts - Device Tree file for SAMA7D65 Curiosity board
+ *
+ *  Copyright (c) 2024 Microchip Technology Inc. and its subsidiaries
+ *
+ *  Author: Romain Sioen <romain.sioen@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama7d65-pinfunc.h"
+#include "sama7d65.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAMA7D65 Curiosity";
+	compatible = "microchip,sama7d65-curiosity", "microchip,sama7d65",
+		     "microchip,sama7d6", "microchip,sama7";
+
+	aliases {
+		serial0 = &uart6;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioa PIN_PC10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+
+		led0: led-red {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pioa PIN_PB17 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
+		};
+
+		led1: led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pioa PIN_PB15 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
+		};
+
+		led2: led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&pioa PIN_PA21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2_default>;
+	status = "okay";
+};
+
+&can3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can3_default>;
+	status = "okay";
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6_default>;
+	status = "okay";
+};
+
+&flx10 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+};
+
+&gmac0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac0_default
+		     &pinctrl_gmac0_mdio_default
+		     &pinctrl_gmac0_txck_default
+		     &pinctrl_gmac0_phy_irq>;
+	phy-mode = "rgmii-id";
+	nvmem-cells = <&eeprom0_eui48>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <0x7>;
+		interrupt-parent = <&pioa>;
+		interrupts = <PIN_PC1 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c10 {
+	dmas = <0>, <0>;
+	i2c-analog-filter;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c10_default>;
+	status = "okay";
+
+	power-monitor@10 {
+		compatible = "microchip,pac1934";
+		reg = <0x10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <0x1>;
+			shunt-resistor-micro-ohms = <47000>;
+			label = "VDD3V3";
+		};
+
+		channel@2 {
+			reg = <0x2>;
+			shunt-resistor-micro-ohms = <47000>;
+			label = "VDDIODDR";
+		};
+
+		channel@3 {
+			reg = <0x3>;
+			shunt-resistor-micro-ohms = <47000>;
+			label = "VDDCORE";
+		};
+
+		channel@4 {
+			reg = <0x4>;
+			shunt-resistor-micro-ohms = <47000>;
+			label = "VDDCPU";
+		};
+	};
+
+	pmic@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+		lvin-supply = <&reg_5v>;
+		pvin1-supply = <&reg_5v>;
+		pvin2-supply = <&reg_5v>;
+		pvin3-supply = <&reg_5v>;
+		pvin4-supply = <&reg_5v>;
+		status = "okay";
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddioddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1350000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1350000>;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddcore: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1050000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddcpu: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1050000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-suspend-microvolt = <1800000>;
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3700000>;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	eeprom0: eeprom@51 {
+		compatible = "microchip,24aa025e48";
+		reg = <0x51>;
+		size = <256>;
+		pagesize = <16>;
+		vcc-supply = <&vdd_3v3>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eeprom0_eui48: eui48@fa {
+				reg = <0xfa 0x6>;
+			};
+		};
+	};
+};
+
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
+&pioa {
+	pinctrl_can1_default: can1-default {
+		pinmux = <PIN_PD10__CANTX1>,
+			 <PIN_PD11__CANRX1>;
+		bias-disable;
+	};
+
+	pinctrl_can2_default: can2-default {
+		pinmux = <PIN_PD12__CANTX2>,
+			 <PIN_PD13__CANRX2>;
+		bias-disable;
+	};
+
+	pinctrl_can3_default: can3-default {
+		pinmux = <PIN_PD14__CANTX3>,
+			 <PIN_PD15__CANRX3>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_default: gmac0-default {
+		pinmux = <PIN_PA26__G0_TX0>,
+			 <PIN_PA27__G0_TX1>,
+			 <PIN_PB4__G0_TX2>,
+			 <PIN_PB5__G0_TX3>,
+			 <PIN_PA29__G0_RX0>,
+			 <PIN_PA30__G0_RX1>,
+			 <PIN_PB2__G0_RX2>,
+			 <PIN_PB6__G0_RX3>,
+			 <PIN_PA25__G0_TXCTL>,
+			 <PIN_PB3__G0_RXCK>,
+			 <PIN_PA28__G0_RXCTL>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_mdio_default: gmac0-mdio-default {
+		pinmux = <PIN_PA31__G0_MDC>,
+			 <PIN_PB0__G0_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_phy_irq: gmac0-phy-irq {
+		pinmux = <PIN_PC1__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_txck_default: gmac0-txck-default {
+		pinmux = <PIN_PB1__G0_REFCK>;
+		slew-rate = <0>;
+		bias-pull-up;
+	};
+
+	pinctrl_i2c10_default: i2c10-default {
+		pinmux = <PIN_PB19__FLEXCOM10_IO1>,
+			 <PIN_PB20__FLEXCOM10_IO0>;
+		bias-pull-up;
+	};
+
+	pinctrl_key_gpio_default: key-gpio-default {
+		pinmux = <PIN_PC10__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led-gpio-default {
+		pinmux = <PIN_PB15__GPIO>,
+			 <PIN_PB17__GPIO>,
+			 <PIN_PA21__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1-default {
+		cmd-data {
+			pinmux = <PIN_PB22__SDMMC1_CMD>,
+				 <PIN_PB24__SDMMC1_DAT0>,
+				 <PIN_PB25__SDMMC1_DAT1>,
+				 <PIN_PB26__SDMMC1_DAT2>,
+				 <PIN_PB27__SDMMC1_DAT3>;
+			slew-rate = <0>;
+			bias-disable;
+		};
+
+		ck-cd-rstn-vddsel {
+			pinmux = <PIN_PB23__SDMMC1_CK>,
+				 <PIN_PB21__SDMMC1_RSTN>,
+				 <PIN_PB30__SDMMC1_1V8SEL>,
+				 <PIN_PB29__SDMMC1_CD>,
+				 <PIN_PB28__SDMMC1_WP>;
+			slew-rate = <0>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart6_default: uart6-default {
+		pinmux = <PIN_PD18__FLEXCOM6_IO0>,
+			 <PIN_PD19__FLEXCOM6_IO1>;
+		bias-disable;
+	};
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&shdwc {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
new file mode 100644
index 000000000000..eb5f27ce1942
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama7g54_curiosity.dts - Device Tree file for SAMA7G54 Curiosity Board
+ *
+ * Copyright (C) 2024 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Mihai Sain <mihai.sain@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama7g5-pinfunc.h"
+#include "sama7g5.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAMA7G54 Curiosity";
+	compatible = "microchip,sama7g54-curiosity", "microchip,sama7g5", "microchip,sama7";
+
+	aliases {
+		serial0 = &uart3;
+		i2c0 = &i2c10;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-user {
+			label = "user-button";
+			gpios = <&pioA PIN_PD19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+
+		led-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&pioA PIN_PD13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_BOOT;
+			gpios = <&pioA PIN_PD14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_CPU;
+			gpios = <&pioA PIN_PB15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x10000000>; /* 256 MiB DDR3L-1066 16-bit */
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&adc {
+	vddana-supply = <&vddout25>;
+	vref-supply = <&vddout25>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand_default>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			atmel,rb = <0>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "nand: at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				bootloader@40000 {
+					label = "nand: u-boot";
+					reg = <0x40000 0x100000>;
+				};
+
+				bootloaderenv@140000 {
+					label = "nand: u-boot env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "nand: device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "nand: kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "nand: rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart3: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx3_default>;
+		status = "okay";
+	};
+};
+
+&flx10 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c10: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx10_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		power-monitor@1f {
+			compatible = "microchip,pac1934";
+			reg = <0x1f>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@1 {
+				reg = <0x1>;
+				shunt-resistor-micro-ohms = <47000>;
+				label = "VDD3V3";
+			};
+
+			channel@2 {
+				reg = <0x2>;
+				shunt-resistor-micro-ohms = <47000>;
+				label = "VDDIODDR";
+			};
+
+			channel@3 {
+				reg = <0x3>;
+				shunt-resistor-micro-ohms = <47000>;
+				label = "VDDCORE";
+			};
+
+			channel@4 {
+				reg = <0x4>;
+				shunt-resistor-micro-ohms = <47000>;
+				label = "VDDCPU";
+			};
+		};
+
+		eeprom@51 {
+			compatible = "atmel,24c02";
+			reg = <0x51>;
+			pagesize = <16>;
+			size = <256>;
+			vcc-supply = <&vdd_3v3>;
+		};
+
+		pmic@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+			lvin-supply = <&reg_5v>;
+			pvin1-supply = <&reg_5v>;
+			pvin2-supply = <&reg_5v>;
+			pvin3-supply = <&reg_5v>;
+			pvin4-supply = <&reg_5v>;
+
+			regulators {
+				vdd_3v3: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <3300000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddioddr: VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcore: VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1150000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcpu: VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-ramp-delay = <3125>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1050000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vldo1: LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-suspend-microvolt = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				vldo2: LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-suspend-microvolt = <3300000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+			};
+		};
+	};
+};
+
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <100000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+		label = "at91-qspi";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			at91bootstrap@0 {
+				label = "qspi1: at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "qspi1: u-boot";
+				reg = <0x40000 0x100000>;
+			};
+
+			bootloaderenv@140000 {
+				label = "qspi1: u-boot env";
+				reg = <0x140000 0x40000>;
+			};
+
+			dtb@180000 {
+				label = "qspi1: device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "qspi1: kernel";
+				reg = <0x200000 0x600000>;
+			};
+		};
+	};
+};
+
+&pioA {
+	pinctrl_flx3_default: flx3-default {
+		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
+			 <PIN_PD17__FLEXCOM3_IO1>;
+		bias-pull-up;
+	};
+
+	pinctrl_flx10_default: flx10-default {
+		pinmux = <PIN_PC30__FLEXCOM10_IO0>,
+			 <PIN_PC31__FLEXCOM10_IO1>;
+		bias-pull-up;
+	};
+
+	pinctrl_key_gpio_default: key-gpio-default {
+		pinmux = <PIN_PD19__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led-gpio-default {
+		pinmux = <PIN_PD13__GPIO>,
+			 <PIN_PD14__GPIO>,
+			 <PIN_PB15__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_mikrobus1_an_default: mikrobus1-an-default {
+		pinmux = <PIN_PC15__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an_default: mikrobus2-an-default {
+		pinmux = <PIN_PC13__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_nand_default: nand-default {
+		pinmux = <PIN_PD9__D0>,
+			 <PIN_PD10__D1>,
+			 <PIN_PD11__D2>,
+			 <PIN_PC21__D3>,
+			 <PIN_PC22__D4>,
+			 <PIN_PC23__D5>,
+			 <PIN_PC24__D6>,
+			 <PIN_PD2__D7>,
+			 <PIN_PD3__NANDRDY>,
+			 <PIN_PD4__NCS3_NANDCS>,
+			 <PIN_PD5__NWE_NWR0_NANDWE>,
+			 <PIN_PD6__NRD_NANDOE>,
+			 <PIN_PD7__A21_NANDALE>,
+			 <PIN_PD8__A22_NANDCLE>;
+		bias-disable;
+		slew-rate = <0>;
+	};
+
+	pinctrl_qspi1_default: qspi1-default {
+		pinmux = <PIN_PB22__QSPI1_IO3>,
+			 <PIN_PB23__QSPI1_IO2>,
+			 <PIN_PB24__QSPI1_IO1>,
+			 <PIN_PB25__QSPI1_IO0>,
+			 <PIN_PB26__QSPI1_CS>,
+			 <PIN_PB27__QSPI1_SCK>;
+		bias-pull-up;
+		slew-rate = <0>;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0-default {
+		pinmux = <PIN_PA0__SDMMC0_CK>,
+			 <PIN_PA1__SDMMC0_CMD>,
+			 <PIN_PA2__SDMMC0_RSTN>,
+			 <PIN_PA3__SDMMC0_DAT0>,
+			 <PIN_PA4__SDMMC0_DAT1>,
+			 <PIN_PA5__SDMMC0_DAT2>,
+			 <PIN_PA6__SDMMC0_DAT3>;
+		bias-pull-up;
+		slew-rate = <0>;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1-default {
+		pinmux = <PIN_PB29__SDMMC1_CMD>,
+			 <PIN_PB30__SDMMC1_CK>,
+			 <PIN_PB31__SDMMC1_DAT0>,
+			 <PIN_PC0__SDMMC1_DAT1>,
+			 <PIN_PC1__SDMMC1_DAT2>,
+			 <PIN_PC2__SDMMC1_DAT3>,
+			 <PIN_PC4__SDMMC1_CD>;
+		bias-pull-up;
+		slew-rate = <0>;
+	};
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+/* M.2 slot for wireless card */
+&sdmmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+/* micro SD socket */
+&sdmmc1 {
+	bus-width = <4>;
+	disable-wp;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&shdwc {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&vddout25 {
+	vin-supply = <&vdd_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
index de44da2e4aae..3924f62ff0fb 100644
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
@@ -35,16 +35,6 @@
 		i2c2 = &i2c9;
 	};
 
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <24000000>;
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -88,6 +78,14 @@
 		reg = <0x60000000 0x20000000>;
 	};
 
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
 	sound: sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "sama7g5ek audio";
@@ -129,6 +127,7 @@
 	vref-supply = <&vddout25>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
+	atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
 	status = "okay";
 };
 
@@ -236,16 +235,52 @@
 		i2c-digital-filter-width-ns = <35>;
 		status = "okay";
 
-		mcp16502@5b {
+		power-monitor@10 {
+			compatible = "microchip,pac1934";
+			reg = <0x10>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@1 {
+				reg = <0x1>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3";
+			};
+
+			channel@2 {
+				reg = <0x2>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDIODDR";
+			};
+
+			channel@3 {
+				reg = <0x3>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDCORE";
+			};
+
+			channel@4 {
+				reg = <0x4>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDCPU";
+			};
+		};
+
+		pmic@5b {
 			compatible = "microchip,mcp16502";
 			reg = <0x5b>;
+			lvin-supply = <&reg_5v>;
+			pvin1-supply = <&reg_5v>;
+			pvin2-supply = <&reg_5v>;
+			pvin3-supply = <&reg_5v>;
+			pvin4-supply = <&reg_5v>;
 			status = "okay";
 
 			regulators {
 				vdd_3v3: VDD_IO {
 					regulator-name = "VDD_IO";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -264,8 +299,8 @@
 
 				vddioddr: VDD_DDR {
 					regulator-name = "VDD_DDR";
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1450000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -285,15 +320,15 @@
 
 				vddcore: VDD_CORE {
 					regulator-name = "VDD_CORE";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
-						regulator-suspend-voltage = <1150000>;
+						regulator-suspend-microvolt = <1150000>;
 						regulator-mode = <4>;
 					};
 
@@ -306,7 +341,7 @@
 				vddcpu: VDD_OTHER {
 					regulator-name = "VDD_OTHER";
 					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-max-microvolt = <1250000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-ramp-delay = <3125>;
@@ -314,7 +349,7 @@
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
-						regulator-suspend-voltage = <1050000>;
+						regulator-suspend-microvolt = <1050000>;
 						regulator-mode = <4>;
 					};
 
@@ -326,12 +361,12 @@
 
 				vldo1: LDO1 {
 					regulator-name = "LDO1";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 
 					regulator-state-standby {
-						regulator-suspend-voltage = <1800000>;
+						regulator-suspend-microvolt = <1800000>;
 						regulator-on-in-suspend;
 					};
 
@@ -346,7 +381,7 @@
 					regulator-max-microvolt = <3700000>;
 
 					regulator-state-standby {
-						regulator-suspend-voltage = <1800000>;
+						regulator-suspend-microvolt = <1800000>;
 						regulator-on-in-suspend;
 					};
 
@@ -403,6 +438,42 @@
 		i2c-digital-filter;
 		i2c-digital-filter-width-ns = <35>;
 		status = "okay";
+
+		eeprom0: eeprom@52 {
+			compatible = "microchip,24aa025e48";
+			reg = <0x52>;
+			size = <256>;
+			pagesize = <16>;
+			vcc-supply = <&vdd_3v3>;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				eeprom0_eui48: eui48@fa {
+					reg = <0xfa 0x6>;
+				};
+			};
+		};
+
+		eeprom1: eeprom@53 {
+			compatible = "microchip,24aa025e48";
+			reg = <0x53>;
+			size = <256>;
+			pagesize = <16>;
+			vcc-supply = <&vdd_3v3>;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				eeprom1_eui48: eui48@fa {
+					reg = <0xfa 0x6>;
+				};
+			};
+		};
 	};
 };
 
@@ -440,6 +511,8 @@
 		     &pinctrl_gmac0_txck_default
 		     &pinctrl_gmac0_phy_irq>;
 	phy-mode = "rgmii-id";
+	nvmem-cells = <&eeprom0_eui48>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 
 	ethernet-phy@7 {
@@ -457,6 +530,8 @@
 		     &pinctrl_gmac1_mdio_default
 		     &pinctrl_gmac1_phy_irq>;
 	phy-mode = "rmii";
+	nvmem-cells = <&eeprom1_eui48>;
+	nvmem-cell-names = "mac-address";
 	status = "okay"; /* Conflict with pdmc0. */
 
 	ethernet-phy@0 {
@@ -471,6 +546,10 @@
 	pinctrl-0 = <&pinctrl_i2s0_default>;
 };
 
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
 &pdmc0 {
 	#sound-dai-cells = <0>;
 	microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 1 */
@@ -764,8 +843,9 @@
 &sdmmc0 {
 	bus-width = <8>;
 	non-removable;
-	no-1-8-v;
 	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vldo1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	status = "okay";
@@ -775,6 +855,8 @@
 	bus-width = <4>;
 	no-1-8-v;
 	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc1_default>;
 	status = "okay";
@@ -789,7 +871,7 @@
 };
 
 &shdwc {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	status = "okay";
 
 	input@0 {
@@ -797,6 +879,10 @@
 	};
 };
 
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
 &spdifrx {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spdifrx_default>;
diff --git a/arch/arm/boot/dts/at91-smartkiz.dts b/arch/arm/boot/dts/microchip/at91-smartkiz.dts
index b76a6b5ac464..b76a6b5ac464 100644
--- a/arch/arm/boot/dts/at91-smartkiz.dts
+++ b/arch/arm/boot/dts/microchip/at91-smartkiz.dts
diff --git a/arch/arm/boot/dts/at91-som60.dtsi b/arch/arm/boot/dts/microchip/at91-som60.dtsi
index 39474a112b16..39474a112b16 100644
--- a/arch/arm/boot/dts/at91-som60.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-som60.dtsi
diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/microchip/at91-tse850-3.dts
index 7e5c598e7e68..9d58a3931207 100644
--- a/arch/arm/boot/dts/at91-tse850-3.dts
+++ b/arch/arm/boot/dts/microchip/at91-tse850-3.dts
@@ -106,35 +106,35 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ch1-red {
+		led-ch1-red {
 			label = "ch-1:red";
 			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
 		};
-		ch1-green {
+		led-ch1-green {
 			label = "ch-1:green";
 			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
 		};
-		ch2-red {
+		led-ch2-red {
 			label = "ch-2:red";
 			gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
 		};
-		ch2-green {
+		led-ch2-green {
 			label = "ch-2:green";
 			gpios = <&pioA 20 GPIO_ACTIVE_LOW>;
 		};
-		data-red {
+		led-data-red {
 			label = "data:red";
 			gpios = <&pioA 19 GPIO_ACTIVE_LOW>;
 		};
-		data-green {
+		led-data-green {
 			label = "data:green";
 			gpios = <&pioA 18 GPIO_ACTIVE_LOW>;
 		};
-		alarm-red {
+		led-alarm-red {
 			label = "alarm:red";
 			gpios = <&pioA 17 GPIO_ACTIVE_LOW>;
 		};
-		alarm-green {
+		led-alarm-green {
 			label = "alarm:green";
 			gpios = <&pioA 16 GPIO_ACTIVE_LOW>;
 		};
@@ -300,3 +300,63 @@
 
 	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
 };
+
+&pioA {
+	gpio-line-names =
+	/*  0 */	"SUP-A", "SUP-B", "SUP-C", "SIG<LEV",
+	/*  4 */	"", "/RFRST", "", "",
+	/*  8 */	"/ADD", "", "/LOOP1", "/LOOP2",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"LED1GREEN", "LED1RED", "LED2GREEN", "LED2RED",
+	/* 20 */	"LED3GREEN", "LED3RED", "LED4GREEN", "LED4RED",
+	/* 24 */	"", "", "", "",
+	/* 28 */	"", "", "SDA", "SCL";
+};
+
+&pioB {
+	gpio-line-names =
+	/*  0 */	"", "", "", "",
+	/*  4 */	"", "", "", "",
+	/*  8 */	"", "", "", "",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"", "", "", "",
+	/* 20 */	"", "", "", "",
+	/* 24 */	"", "", "SIG<LIN", "SIG>LIN",
+	/* 28 */	"RXD", "TXD", "BRX", "BTX";
+};
+
+&pioC {
+	gpio-line-names =
+	/*  0 */	"ETX0", "ETX1", "ERX0", "ERX1",
+	/*  4 */	"ETXEN", "ECRSDV", "ERXER", "EREFCK",
+	/*  8 */	"EMDC", "EMDIO", "", "",
+	/* 12 */	"", "", "", "/ILIM",
+	/* 16 */	"BCK", "LRCK", "DIN", "",
+	/* 20 */	"", "", "", "",
+	/* 24 */	"", "", "", "",
+	/* 28 */	"", "", "", "VBUS";
+};
+
+&pioD {
+	gpio-line-names =
+	/*  0 */	"I1", "I2", "O1", "EXTVEN",
+	/*  4 */	"", "456KHZ", "VCTRL", "SYNCSEL",
+	/*  8 */	"STEREO", "", "", "",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"", ">LIN", "LIN>", "",
+	/* 20 */	"VREFEN", "", "", "",
+	/* 24 */	"", "", "VINOK", "",
+	/* 28 */	"POEOK", "USBON", "POELOAD", "";
+};
+
+&pioE {
+	gpio-line-names =
+	/*  0 */	"", "", "", "",
+	/*  4 */	"", "", "", "",
+	/*  8 */	"", "", "", "",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"", "", "", "",
+	/* 20 */	"", "ALE", "CLE", "",
+	/* 24 */	"", "", "", "",
+	/* 28 */	"", "", "", "/ETHINT";
+};
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/microchip/at91-vinco.dts
index ebeaa6ab500e..c5fc51667066 100644
--- a/arch/arm/boot/dts/at91-vinco.dts
+++ b/arch/arm/boot/dts/microchip/at91-vinco.dts
@@ -159,19 +159,19 @@
 			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "disable";
+			status = "disabled";
 		};
 
-		usb1: ohci@500000 {
+		usb1: usb@500000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioE 11 GPIO_ACTIVE_LOW
 					   &pioE 12 GPIO_ACTIVE_LOW
 					  >;
-			status = "disable";
+			status = "disabled";
 		};
 
-		usb2: ehci@600000 {
+		usb2: usb@600000 {
 			/* 4G Modem */
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/microchip/at91-wb45n.dts
index ef73f727f7bd..ef73f727f7bd 100644
--- a/arch/arm/boot/dts/at91-wb45n.dts
+++ b/arch/arm/boot/dts/microchip/at91-wb45n.dts
diff --git a/arch/arm/boot/dts/at91-wb45n.dtsi b/arch/arm/boot/dts/microchip/at91-wb45n.dtsi
index 430c75358086..430c75358086 100644
--- a/arch/arm/boot/dts/at91-wb45n.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-wb45n.dtsi
diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/microchip/at91-wb50n.dts
index ec2becf6133b..ec2becf6133b 100644
--- a/arch/arm/boot/dts/at91-wb50n.dts
+++ b/arch/arm/boot/dts/microchip/at91-wb50n.dts
diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/microchip/at91-wb50n.dtsi
index 74b249bb6351..74b249bb6351 100644
--- a/arch/arm/boot/dts/at91-wb50n.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-wb50n.dtsi
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/microchip/at91rm9200.dtsi
index d1181ead18e5..e105ad855ce8 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/microchip/at91rm9200.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -101,7 +102,7 @@
 				reg = <0xffffff00 0x100>;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91rm9200-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -134,9 +135,9 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0xfffa0000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
-					      18 IRQ_TYPE_LEVEL_HIGH 0
-					      19 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
@@ -146,9 +147,9 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0xfffa4000 0x100>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
-					      21 IRQ_TYPE_LEVEL_HIGH 0
-					      22 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <21 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <22 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&slow_xtal>;
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
@@ -224,7 +225,7 @@
 			pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
 				ranges = <0xfffff400 0xfffff400 0x800>;
 
 				atmel,mux-mask = <
@@ -596,6 +597,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -607,6 +609,7 @@
 			usart0: serial@fffc0000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -620,6 +623,7 @@
 			usart1: serial@fffc4000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -633,6 +637,7 @@
 			usart2: serial@fffc8000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -646,6 +651,7 @@
 			usart3: serial@fffcc000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffcc000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -660,7 +666,7 @@
 				compatible = "atmel,at91rm9200-udc";
 				reg = <0xfffb0000 0x4000>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 1>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 			};
@@ -696,7 +702,7 @@
 			status = "disabled";
 		};
 
-		usb0: ohci@300000 {
+		usb0: usb@300000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00300000 0x100000>;
 			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -708,9 +714,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 26 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioA 25 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 26 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/at91rm9200_pqfp.dtsi b/arch/arm/boot/dts/microchip/at91rm9200_pqfp.dtsi
index c3d4177b9823..c3d4177b9823 100644
--- a/arch/arm/boot/dts/at91rm9200_pqfp.dtsi
+++ b/arch/arm/boot/dts/microchip/at91rm9200_pqfp.dtsi
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
index 4624a6f076f8..ce691c4692b9 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
@@ -89,7 +89,7 @@
 			};
 		};
 
-		usb0: ohci@300000 {
+		usb0: usb@300000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -127,19 +127,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ds2 {
+		led-ds2 {
 			label = "green";
 			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "mmc0";
 		};
 
-		ds4 {
+		led-ds4 {
 			label = "yellow";
 			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		ds6 {
+		led-ds6 {
 			label = "red";
 			gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/microchip/at91sam9260.dtsi
index 9d9820db9482..fc0b6a73204f 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9260.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -64,7 +65,7 @@
 			clock-frequency = <0>;
 		};
 
-		adc_op_clk: adc_op_clk{
+		adc_op_clk: adc_op_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <5000000>;
@@ -114,7 +115,7 @@
 				reg = <0xffffee00 0x200>;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9260-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -129,7 +130,7 @@
 				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
 			};
 
-			shdwc@fffffd10 {
+			shdwc: poweroff@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
 				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
@@ -147,9 +148,9 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0xfffa0000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
-					      18 IRQ_TYPE_LEVEL_HIGH 0
-					      19 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
@@ -159,9 +160,9 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0xfffdc000 0x100>;
-				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
-					      27 IRQ_TYPE_LEVEL_HIGH 0
-					      28 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <27 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <28 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 28>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
@@ -169,7 +170,7 @@
 			pinctrl: pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
 				ranges = <0xfffff400 0xfffff400 0x600>;
 
 				atmel,mux-mask = <
@@ -532,6 +533,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -543,6 +545,7 @@
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -556,6 +559,7 @@
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -569,6 +573,7 @@
 			usart2: serial@fffb8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -582,6 +587,7 @@
 			usart3: serial@fffd0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -595,6 +601,7 @@
 			uart0: serial@fffd4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -608,6 +615,7 @@
 			uart1: serial@fffd8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -734,7 +742,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -773,9 +781,8 @@
 
 	i2c_gpio0: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioA 23 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 24 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
index bb72f050a4fe..8522a210b484 100644
--- a/arch/arm/boot/dts/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
@@ -112,7 +112,7 @@
 				};
 			};
 
-			shdwc@fffffd10 {
+			shdwc: poweroff@fffffd10 {
 				atmel,wakeup-counter = <10>;
 				atmel,wakeup-rtt-timer;
 			};
@@ -131,7 +131,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -165,7 +165,7 @@
 	i2c-gpio-0 {
 		status = "okay";
 
-		24c512@50 {
+		eeprom@50 {
 			compatible = "atmel,24c512";
 			reg = <0x50>;
 		};
@@ -174,13 +174,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ds1 {
+		led-ds1 {
 			label = "ds1";
 			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		ds5 {
+		led-ds5 {
 			label = "ds5";
 			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/microchip/at91sam9261.dtsi
index 259aca565305..d1d678b77e84 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9261.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -76,7 +77,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -179,6 +180,7 @@
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -192,6 +194,7 @@
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -202,9 +205,10 @@
 				status = "disabled";
 			};
 
-			usart2: serial@fffb8000{
+			usart2: serial@fffb8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -301,6 +305,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -312,7 +317,7 @@
 			pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
 				ranges = <0xfffff400 0xfffff400 0x600>;
 
 				atmel,mux-mask =
@@ -594,7 +599,7 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9261-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -609,7 +614,7 @@
 				clocks = <&slow_xtal>;
 			};
 
-			shdwc@fffffd10 {
+			poweroff@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
 				clocks = <&slow_xtal>;
@@ -650,8 +655,8 @@
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_bitbang>;
-		gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */
-			<&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */
+		sda-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 8 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/microchip/at91sam9261ek.dts
index 88869ca874d1..313bc2797fde 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9261ek.dts
@@ -31,7 +31,7 @@
 	};
 
 	ahb {
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			status = "okay";
 		};
 
@@ -156,7 +156,7 @@
 					compatible = "ti,ads7843";
 					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
 					spi-max-frequency = <3000000>;
-					pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
+					pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>;
 
 					ti,x-min = /bits/ 16 <150>;
 					ti,x-max = /bits/ 16 <3830>;
@@ -192,19 +192,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ds8 {
+		led-ds8 {
 			label = "ds8";
 			gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		ds7 {
+		led-ds7 {
 			label = "ds7";
 			gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 
-		ds1 {
+		led-ds1 {
 			label = "ds1";
 			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/microchip/at91sam9263.dtsi
index c080df8c2312..a4b5d1f228f9 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9263.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -100,7 +101,7 @@
 				atmel,external-irqs = <30 31>;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9263-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -157,7 +158,7 @@
 				clocks = <&slow_xtal>;
 			};
 
-			shdwc@fffffd10 {
+			poweroff@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
 				clocks = <&slow_xtal>;
@@ -166,7 +167,7 @@
 			pinctrl@fffff200 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
 				ranges = <0xfffff200 0xfffff200 0xa00>;
 
 				atmel,mux-mask = <
@@ -540,6 +541,7 @@
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -551,6 +553,7 @@
 			usart0: serial@fff8c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff8c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -564,6 +567,7 @@
 			usart1: serial@fff90000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff90000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -577,6 +581,7 @@
 			usart2: serial@fff94000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff94000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -763,7 +768,7 @@
 			status = "disabled";
 		};
 
-		usb0: ohci@a00000 {
+		usb0: usb@a00000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00a00000 0x100000>;
 			interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -821,9 +826,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
-			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioB 4 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioB 5 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
index ce8baff6a9f4..93c5268a0845 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
@@ -152,7 +152,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
@@ -207,7 +207,7 @@
 			};
 		};
 
-		usb0: ohci@a00000 {
+		usb0: usb@a00000 {
 			num-ports = <2>;
 			status = "okay";
 			atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH
@@ -219,13 +219,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		d3 {
+		led-d3 {
 			label = "d3";
 			gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		d2 {
+		led-d2 {
 			label = "d2";
 			gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
@@ -253,7 +253,7 @@
 	i2c-gpio-0 {
 		status = "okay";
 
-		24c512@50 {
+		eeprom@50 {
 			compatible = "atmel,24c512";
 			reg = <0x50>;
 			pagesize = <128>;
diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/microchip/at91sam9g15.dtsi
index dde88276fe52..dde88276fe52 100644
--- a/arch/arm/boot/dts/at91sam9g15.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g15.dtsi
diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/microchip/at91sam9g15ek.dts
index 889a5097eb2d..889a5097eb2d 100644
--- a/arch/arm/boot/dts/at91sam9g15ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g15ek.dts
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/microchip/at91sam9g20.dtsi
index 708e1646b7f4..738a43ffd228 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g20.dtsi
@@ -41,7 +41,7 @@
 				atmel,adc-startup-time = <40>;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9g20-pmc", "atmel,at91sam9260-pmc", "syscon";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
index 6de7a7cd3c07..1e62fd371ddb 100644
--- a/arch/arm/boot/dts/at91sam9g20ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
@@ -14,13 +14,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ds1 {
+		led-ds1 {
 			label = "ds1";
 			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		ds5 {
+		led-ds5 {
 			label = "ds5";
 			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts
index 2db95e8ffc64..3e5eab57d1a5 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts
@@ -12,7 +12,7 @@
 	compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9";
 
 	ahb {
-		apb{
+		apb {
 			mmc0: mmc@fffa8000 {
 				/* clk already mux wuth slot0 */
 				pinctrl-0 = <
@@ -40,13 +40,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ds1 {
+		led-ds1 {
 			label = "ds1";
 			gpios = <&pioB 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		ds5 {
+		led-ds5 {
 			label = "ds5";
 			gpios = <&pioB 8 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
index 60d61291f344..84a7287107f8 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
@@ -39,6 +39,13 @@
 
 				};
 
+				usb1 {
+					pinctrl_usb1_vbus_gpio: usb1_vbus_gpio {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PC5 GPIO */
+					};
+				};
+
 				mmc0_slot1 {
 					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
 						atmel,pins =
@@ -84,6 +91,8 @@
 			};
 
 			usb1: gadget@fffa4000 {
+				pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+				pinctrl-names = "default";
 				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
@@ -117,7 +126,7 @@
 				};
 			};
 
-			shdwc@fffffd10 {
+			shdwc: poweroff@fffffd10 {
 				atmel,wakeup-counter = <10>;
 				atmel,wakeup-rtt-timer;
 			};
@@ -202,7 +211,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -211,7 +220,7 @@
 	i2c-gpio-0 {
 		status = "okay";
 
-		24c512@50 {
+		eeprom@50 {
 			compatible = "atmel,24c512";
 			reg = <0x50>;
 			vcc-supply = <&reg_3v3>;
diff --git a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
index 92f2c05c873f..947c011c1b00 100644
--- a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
@@ -37,71 +37,71 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power_blue {
+		led-power-blue {
 			label = "smartgw:power:blue";
 			gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		power_green {
+		led-power-green {
 			label = "smartgw:power:green";
 			gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
+			linux,default-trigger = "timer";
 		};
 
-		power_red {
+		led-power-red {
 			label = "smartgw:power:red";
 			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		radio_blue {
+		led-radio-blue {
 			label = "smartgw:radio:blue";
 			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		radio_green {
+		led-radio-green {
 			label = "smartgw:radio:green";
 			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		radio_red {
+		led-radio-red {
 			label = "smartgw:radio:red";
 			gpios = <&pioC 16 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		internet_blue {
+		led-internet-blue {
 			label = "smartgw:internet:blue";
 			gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		internet_green {
+		led-internet-green {
 			label = "smartgw:internet:green";
 			gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		internet_red {
+		led-internet-red {
 			label = "smartgw:internet:red";
 			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		heartbeat {
+		led-heartbeat {
 			label = "smartgw:heartbeat";
 			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		pb18 {
+		led-pb18 {
 			status = "disabled";
 		};
 
-		pd21 {
+		led-pd21 {
 			status = "disabled";
 		};
 	};
@@ -121,6 +121,8 @@
 };
 
 &usart3 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
 	status = "okay";
 
 	pinctrl-0 = <&pinctrl_usart3
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/microchip/at91sam9g25.dtsi
index d2f13afb35ea..ec3c77221881 100644
--- a/arch/arm/boot/dts/at91sam9g25.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g25.dtsi
@@ -26,7 +26,7 @@
 				      >;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9g25-pmc", "atmel,at91sam9x5-pmc", "syscon";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/microchip/at91sam9g25ek.dts
index 61b0bdb615dc..61b0bdb615dc 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g25ek.dts
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/microchip/at91sam9g35.dtsi
index 48c2bc4a7753..c9cfb93092ee 100644
--- a/arch/arm/boot/dts/at91sam9g35.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g35.dtsi
@@ -25,7 +25,7 @@
 				      >;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9g35-pmc", "atmel,at91sam9x5-pmc", "syscon";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/microchip/at91sam9g35ek.dts
index f966b56de63c..f966b56de63c 100644
--- a/arch/arm/boot/dts/at91sam9g35ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g35ek.dts
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi
index 09794561c7ce..4e00ed2d3ecd 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -69,7 +70,7 @@
 			clock-frequency = <0>;
 		};
 
-		adc_op_clk: adc_op_clk{
+		adc_op_clk: adc_op_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <300000>;
@@ -128,7 +129,7 @@
 				reg = <0xffffea00 0x200>;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9g45-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -151,7 +152,7 @@
 			};
 
 
-			shdwc@fffffd10 {
+			poweroff@fffffd10 {
 				compatible = "atmel,at91sam9rl-shdwc";
 				reg = <0xfffffd10 0x10>;
 				clocks = <&clk32k>;
@@ -189,7 +190,7 @@
 			pinctrl@fffff200 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
 				ranges = <0xfffff200 0xfffff200 0xa00>;
 
 				atmel,mux-mask = <
@@ -675,6 +676,7 @@
 
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				reg = <0xffffee00 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
@@ -687,6 +689,7 @@
 			usart0: serial@fff8c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff8c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -700,6 +703,7 @@
 			usart1: serial@fff90000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff90000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -713,6 +717,7 @@
 			usart2: serial@fff94000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff94000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -726,6 +731,7 @@
 			usart3: serial@fff98000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff98000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -747,7 +753,7 @@
 				status = "disabled";
 			};
 
-			trng@fffcc000 {
+			trng: rng@fffcc000 {
 				compatible = "atmel,at91sam9g45-trng";
 				reg = <0xfffcc000 0x100>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -917,7 +923,7 @@
 				status = "disabled";
 			};
 
-			clk32k: sckc@fffffd50 {
+			clk32k: clock-controller@fffffd50 {
 				compatible = "atmel,at91sam9x5-sckc";
 				reg = <0xfffffd50 0x4>;
 				clocks = <&slow_xtal>;
@@ -958,7 +964,7 @@
 			status = "disabled";
 		};
 
-		usb0: ohci@700000 {
+		usb0: usb@700000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -967,7 +973,7 @@
 			status = "disabled";
 		};
 
-		usb1: ehci@800000 {
+		usb1: usb@800000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00800000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -1004,9 +1010,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 21 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 21 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <5>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts
index 7f45e81ca165..2a31b2f14893 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts
@@ -164,7 +164,7 @@
 				};
 			};
 
-			spi0: spi@fffa4000{
+			spi0: spi@fffa4000 {
 				status = "okay";
 				cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
 				flash@0 {
@@ -303,14 +303,14 @@
 			};
 		};
 
-		usb0: ohci@700000 {
+		usb0: usb@700000 {
 			status = "okay";
 			num-ports = <2>;
 			atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
 					   &pioD 3 GPIO_ACTIVE_LOW>;
 		};
 
-		usb1: ehci@800000 {
+		usb1: usb@800000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi
index 556f35ce49e3..af41c3dbb4bf 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -117,7 +118,7 @@
 				reg = <0xffffea00 0x200>;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9n12-pmc", "syscon";
 				reg = <0xfffffc00 0x200>;
 				#clock-cells = <2>;
@@ -139,34 +140,17 @@
 				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			};
 
-			shdwc@fffffe10 {
+			poweroff@fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
 				clocks = <&clk32k>;
 			};
 
-			sckc@fffffe50 {
+			clk32k: clock-controller@fffffe50 {
 				compatible = "atmel,at91sam9x5-sckc";
 				reg = <0xfffffe50 0x4>;
-
-				slow_osc: slow_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-osc";
-					#clock-cells = <0>;
-					clocks = <&slow_xtal>;
-				};
-
-				slow_rc_osc: slow_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
-					#clock-cells = <0>;
-					clock-frequency = <32768>;
-					clock-accuracy = <50000000>;
-				};
-
-				clk32k: slck {
-					compatible = "atmel,at91sam9x5-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc>, <&slow_osc>;
-				};
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
 			};
 
 			mmc0: mmc@f0008000 {
@@ -242,7 +226,7 @@
 			pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,at91sam9x5-pinctrl", "simple-mfd";
 				ranges = <0xfffff400 0xfffff400 0x800>;
 
 				atmel,mux-mask = <
@@ -593,6 +577,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -618,6 +603,7 @@
 			usart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
@@ -629,6 +615,7 @@
 			usart1: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
@@ -640,6 +627,7 @@
 			usart2: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
@@ -651,6 +639,7 @@
 			usart3: serial@f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
@@ -759,7 +748,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x00100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -797,9 +786,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
index 4c644d4c6be7..b06a54e8e237 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
@@ -180,7 +180,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <1>;
 			atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>;
 			status = "okay";
@@ -207,19 +207,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		d8 {
+		led-d8 {
 			label = "d8";
 			gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "mmc0";
 		};
 
-		d9 {
+		led-d9 {
 			label = "d9";
 			gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 
-		d10 {
+		led-d10 {
 			label = "d10";
 			gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi
index 12c634811820..de74cf2980a0 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -66,7 +67,7 @@
 			clock-frequency = <0>;
 		};
 
-		adc_op_clk: adc_op_clk{
+		adc_op_clk: adc_op_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <1000000>;
@@ -175,6 +176,7 @@
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -188,6 +190,7 @@
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -201,6 +204,7 @@
 			usart2: serial@fffb8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -214,6 +218,7 @@
 			usart3: serial@fffbc000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffbc000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -322,6 +327,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -333,7 +339,7 @@
 			pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
 				ranges = <0xfffff400 0xfffff400 0x800>;
 
 				atmel,mux-mask =
@@ -757,7 +763,7 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9rl-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -772,7 +778,7 @@
 				clocks = <&clk32k>;
 			};
 
-			shdwc@fffffd10 {
+			poweroff@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
 				clocks = <&clk32k>;
@@ -793,7 +799,7 @@
 				status = "disabled";
 			};
 
-			clk32k: sckc@fffffd50 {
+			clk32k: clock-controller@fffffd50 {
 				compatible = "atmel,at91sam9x5-sckc";
 				reg = <0xfffffd50 0x4>;
 				clocks = <&slow_xtal>;
@@ -827,8 +833,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
-			<&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
+		sda-gpios = <&pioA 23 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 24 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
@@ -841,8 +847,8 @@
 
 	i2c-gpio-1 {
 		compatible = "i2c-gpio";
-		gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
-			<&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
+		sda-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/microchip/at91sam9rlek.dts
index a57351270551..a57351270551 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9rlek.dts
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/microchip/at91sam9x25.dtsi
index 0fe8802e1242..7036f5f04571 100644
--- a/arch/arm/boot/dts/at91sam9x25.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x25.dtsi
@@ -27,7 +27,7 @@
 				      >;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9x25-pmc", "atmel,at91sam9x5-pmc", "syscon";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/microchip/at91sam9x25ek.dts
index ad7c6b36f0ba..ad7c6b36f0ba 100644
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9x25ek.dts
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/microchip/at91sam9x35.dtsi
index 0bfa21f18f87..eb03b0497e37 100644
--- a/arch/arm/boot/dts/at91sam9x35.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x35.dtsi
@@ -26,7 +26,7 @@
 				      >;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9x35-pmc", "atmel,at91sam9x5-pmc", "syscon";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/microchip/at91sam9x35ek.dts
index 66675c787b97..66675c787b97 100644
--- a/arch/arm/boot/dts/at91sam9x35ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9x35ek.dts
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi
index ea3b11336c79..9070fd06995a 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -67,7 +68,7 @@
 			clock-frequency = <0>;
 		};
 
-		adc_op_clk: adc_op_clk{
+		adc_op_clk: adc_op_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <1000000>;
@@ -125,7 +126,7 @@
 				reg = <0xffffea00 0x200>;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9x5-pmc", "syscon";
 				reg = <0xfffffc00 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -140,7 +141,7 @@
 				clocks = <&clk32k>;
 			};
 
-			shutdown_controller: shdwc@fffffe10 {
+			shutdown_controller: poweroff@fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
 				clocks = <&clk32k>;
@@ -153,7 +154,7 @@
 				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			};
 
-			clk32k: sckc@fffffe50 {
+			clk32k: clock-controller@fffffe50 {
 				compatible = "atmel,at91sam9x5-sckc";
 				reg = <0xfffffe50 0x4>;
 				clocks = <&slow_xtal>;
@@ -201,7 +202,7 @@
 			pinctrl: pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,at91sam9x5-pinctrl", "simple-mfd";
 				ranges = <0xfffff400 0xfffff400 0x800>;
 
 				/* shared pinctrl settings */
@@ -674,6 +675,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -688,6 +690,7 @@
 			usart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
@@ -702,6 +705,7 @@
 			usart1: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
@@ -716,6 +720,7 @@
 			usart2: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
@@ -775,6 +780,7 @@
 			uart0: serial@f8040000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8040000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
@@ -786,6 +792,7 @@
 			uart1: serial@f8044000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8044000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
@@ -879,7 +886,7 @@
 			};
 		};
 
-		usb0: ohci@600000 {
+		usb0: usb@600000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -888,7 +895,7 @@
 			status = "disabled";
 		};
 
-		usb1: ehci@700000 {
+		usb1: usb@700000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -926,9 +933,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
@@ -941,9 +947,8 @@
 
 	i2c-gpio-1 {
 		compatible = "i2c-gpio";
-		gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
-			 &pioC 1 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioC 1 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
@@ -956,9 +961,8 @@
 
 	i2c-gpio-2 {
 		compatible = "i2c-gpio";
-		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
-			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioB 4 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioB 5 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_can.dtsi
index 04ccb25d342c..04ccb25d342c 100644
--- a/arch/arm/boot/dts/at91sam9x5_can.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_can.dtsi
diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_isi.dtsi
index 4ce98f05d7db..4ce98f05d7db 100644
--- a/arch/arm/boot/dts/at91sam9x5_isi.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_isi.dtsi
diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_lcd.dtsi
index f81c9d1691e0..f81c9d1691e0 100644
--- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_lcd.dtsi
diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_macb0.dtsi
index 222aa30f6860..222aa30f6860 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_macb0.dtsi
diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_macb1.dtsi
index 26bf9b5de9ee..26bf9b5de9ee 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_macb1.dtsi
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_usart3.dtsi
index 098d3fef5c37..a47c765e1b20 100644
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_usart3.dtsi
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	aliases {
@@ -44,6 +45,7 @@
 			usart3: serial@f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
index cdd37f67280b..fb3c19bdfcb6 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
@@ -120,13 +120,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		pb18 {
+		led-pb18 {
 			label = "pb18";
 			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		pd21 {
+		led-pd21 {
 			label = "pd21";
 			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5dm.dtsi
index a9278038af3b..a9278038af3b 100644
--- a/arch/arm/boot/dts/at91sam9x5dm.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5dm.dtsi
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi
index 5f4eaa618ab4..9618b8d965b0 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi
@@ -39,6 +39,8 @@
 };
 
 &dbgu {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/at91sam9xe.dtsi b/arch/arm/boot/dts/microchip/at91sam9xe.dtsi
index f571f77779c3..f571f77779c3 100644
--- a/arch/arm/boot/dts/at91sam9xe.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9xe.dtsi
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/microchip/ethernut5.dts
index ad7a0850252a..52ccef31b391 100644
--- a/arch/arm/boot/dts/ethernut5.dts
+++ b/arch/arm/boot/dts/microchip/ethernut5.dts
@@ -101,7 +101,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/microchip/evk-pro3.dts
index 6d519d02d190..40c5111c2f0a 100644
--- a/arch/arm/boot/dts/evk-pro3.dts
+++ b/arch/arm/boot/dts/microchip/evk-pro3.dts
@@ -45,7 +45,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/microchip/ge863-pro3.dtsi
index dbba33e5a06c..dbba33e5a06c 100644
--- a/arch/arm/boot/dts/ge863-pro3.dtsi
+++ b/arch/arm/boot/dts/microchip/ge863-pro3.dtsi
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
index 0f555eb45bda..0f555eb45bda 100644
--- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
+++ b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-8g.dts
index 5feef9a59a79..ad5d8b56e6fa 100644
--- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
+++ b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-8g.dts
@@ -15,10 +15,12 @@
 &mdio0 {
 	phy2: ethernet-phy@3 {
 		reg = <3>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	phy3: ethernet-phy@4 {
 		reg = <4>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt.dtsi
index 0097e72e3fb2..426893750d51 100644
--- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
+++ b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt.dtsi
@@ -18,6 +18,8 @@
 
 	gpio-restart {
 		compatible = "gpio-restart";
+		pinctrl-0 = <&reset_pins>;
+		pinctrl-names = "default";
 		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
 		priority = <200>;
 	};
@@ -39,7 +41,7 @@
 	status = "okay";
 
 	spi3: spi@400 {
-		pinctrl-0 = <&fc3_b_pins>;
+		pinctrl-0 = <&fc3_b_pins>, <&spi3_cs_pins>;
 		pinctrl-names = "default";
 		status = "okay";
 		cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
@@ -47,6 +49,9 @@
 };
 
 &gpio {
+	pinctrl-0 = <&phy_int_pins>;
+	pinctrl-names = "default";
+
 	fc3_b_pins: fc3-b-pins {
 		/* SCK, MISO, MOSI */
 		pins = "GPIO_51", "GPIO_52", "GPIO_53";
@@ -59,6 +64,18 @@
 		function = "miim_c";
 	};
 
+	phy_int_pins: phy-int-pins {
+		/* PHY_INT# */
+		pins = "GPIO_24";
+		function = "gpio";
+	};
+
+	reset_pins: reset-pins {
+		/* SYS_RST# */
+		pins = "GPIO_56";
+		function = "gpio";
+	};
+
 	sgpio_a_pins: sgpio-a-pins {
 		/* SCK, D0, D1 */
 		pins = "GPIO_32", "GPIO_33", "GPIO_34";
@@ -71,6 +88,12 @@
 		function = "sgpio_b";
 	};
 
+	spi3_cs_pins: spi3-cs-pins {
+		/* CS# */
+		pins = "GPIO_46";
+		function = "gpio";
+	};
+
 	usart0_pins: usart0-pins {
 		/* RXD, TXD */
 		pins = "GPIO_25", "GPIO_26";
@@ -93,21 +116,25 @@
 
 	phy4: ethernet-phy@5 {
 		reg = <5>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
 		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 
 	phy5: ethernet-phy@6 {
 		reg = <6>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
 		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 
 	phy6: ethernet-phy@7 {
 		reg = <7>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
 		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 
 	phy7: ethernet-phy@8 {
 		reg = <8>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
 		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 };
diff --git a/arch/arm/boot/dts/microchip/lan966x-pcb8290.dts b/arch/arm/boot/dts/microchip/lan966x-pcb8290.dts
new file mode 100644
index 000000000000..3b7577e48b46
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-pcb8290.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x-pcb8290.dts - Device Tree file for LAN966X-PCB8290 board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Horatiu Vultur <horatiu.vultur@microchip.com>
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB LAN9668";
+	compatible = "microchip,lan9668-pcb8290", "microchip,lan9668", "microchip,lan966";
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&gpio {
+	miim_a_pins: mdio-pins {
+		/* MDC, MDIO */
+		pins = "GPIO_28", "GPIO_29";
+		function = "miim_a";
+	};
+
+	pps_out_pins: pps-out-pins {
+		/* 1pps output */
+		pins = "GPIO_38";
+		function = "ptpsync_3";
+	};
+
+	ptp_ext_pins: ptp-ext-pins {
+		/* 1pps input */
+		pins = "GPIO_35";
+		function = "ptpsync_0";
+	};
+
+	udc_pins: ucd-pins {
+		/* VBUS_DET B */
+		pins = "GPIO_8";
+		function = "usb_slave_b";
+	};
+};
+
+&mdio0 {
+	pinctrl-0 = <&miim_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ext_phy0: ethernet-phy@7 {
+		reg = <7>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy1: ethernet-phy@8 {
+		reg = <8>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy2: ethernet-phy@9 {
+		reg = <9>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy3: ethernet-phy@10 {
+		reg = <10>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy4: ethernet-phy@15 {
+		reg = <15>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy5: ethernet-phy@16 {
+		reg = <16>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy6: ethernet-phy@17 {
+		reg = <17>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy7: ethernet-phy@18 {
+		reg = <18>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+};
+
+&port0 {
+	reg = <2>;
+	phy-handle = <&ext_phy2>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 0 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port1 {
+	reg = <3>;
+	phy-handle = <&ext_phy3>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 1 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port2 {
+	reg = <0>;
+	phy-handle = <&ext_phy0>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 2 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port3 {
+	reg = <1>;
+	phy-handle = <&ext_phy1>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 3 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port4 {
+	reg = <6>;
+	phy-handle = <&ext_phy6>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 4 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port5 {
+	reg = <7>;
+	phy-handle = <&ext_phy7>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 5 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port6 {
+	reg = <4>;
+	phy-handle = <&ext_phy4>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 6 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port7 {
+	reg = <5>;
+	phy-handle = <&ext_phy5>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 7 SERDES6G(2)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&switch {
+	pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&udc {
+	pinctrl-0 = <&udc_pins>;
+	pinctrl-names = "default";
+	atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x-pcb8291.dts b/arch/arm/boot/dts/microchip/lan966x-pcb8291.dts
new file mode 100644
index 000000000000..3a3d76af8612
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-pcb8291.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x_pcb8291.dts - Device Tree file for PCB8291
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB - LAN9662";
+	compatible = "microchip,lan9662-pcb8291", "microchip,lan9662", "microchip,lan966";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &usart3;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-s0-blue {
+			label = "s0:blue";
+			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s0-green {
+			label = "s0:green";
+			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-blue {
+			label = "s1:blue";
+			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-green {
+			label = "s1:green";
+			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&gpio {
+	fc3_b_pins: fc3-b-pins {
+		/* RX, TX */
+		pins = "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	can0_b_pins:  can0-b-pins {
+		/* RX, TX */
+		pins = "GPIO_35", "GPIO_36";
+		function = "can0_b";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_b_pins>;
+	pinctrl-names = "default";
+	status = "disabled"; /* Conflict with switch */
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart3: serial@200 {
+		pinctrl-0 = <&fc3_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	phys = <&serdes 0 CU(0)>;
+	status = "okay";
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	phys = <&serdes 1 CU(1)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&switch {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x-pcb8309.dts b/arch/arm/boot/dts/microchip/lan966x-pcb8309.dts
index 05ce27ed5648..0cb505f79ba1 100644
--- a/arch/arm/boot/dts/lan966x-pcb8309.dts
+++ b/arch/arm/boot/dts/microchip/lan966x-pcb8309.dts
@@ -42,6 +42,34 @@
 		};
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		led-s0-green {
+			label = "s0:green";
+			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s0-red {
+			label = "s0:red";
+			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-green {
+			label = "s1:green";
+			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-red {
+			label = "s1:red";
+			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
 	mux: mux-controller {
 		compatible = "gpio-mux";
 		#mux-control-cells = <0>;
@@ -69,6 +97,10 @@
 	};
 };
 
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
 &flx3 {
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
 	status = "okay";
@@ -112,6 +144,18 @@
 		function = "fc4_b";
 	};
 
+	pps_out_pins: pps-out-pins {
+		/* 1pps output */
+		pins = "GPIO_38";
+		function = "ptpsync_3";
+	};
+
+	ptp_ext_pins: ptp-ext-pins {
+		/* 1pps input */
+		pins = "GPIO_39";
+		function = "ptpsync_4";
+	};
+
 	sgpio_a_pins: sgpio-a-pins {
 		/* SCK, D0, D1, LD */
 		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
@@ -180,5 +224,7 @@
 };
 
 &switch {
+	pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
+	pinctrl-names = "default";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/microchip/lan966x.dtsi
index 894bf9da19a4..05b73f7cf0c7 100644
--- a/arch/arm/boot/dts/lan966x.dtsi
+++ b/arch/arm/boot/dts/microchip/lan966x.dtsi
@@ -157,6 +157,11 @@
 			};
 		};
 
+		otp: otp@e0021000 {
+			compatible = "microchip,lan9668-otpc", "microchip,lan9662-otpc";
+			reg = <0xe0021000 0x300>;
+		};
+
 		flx0: flexcom@e0040000 {
 			compatible = "atmel,sama5d2-flexcom";
 			reg = <0xe0040000 0x100>;
@@ -541,13 +546,13 @@
 
 			phy0: ethernet-phy@1 {
 				reg = <1>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			phy1: ethernet-phy@2 {
 				reg = <2>;
-				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/microchip/mpa1600.dts
index 005c2758e229..2a97e2c0b894 100644
--- a/arch/arm/boot/dts/mpa1600.dts
+++ b/arch/arm/boot/dts/microchip/mpa1600.dts
@@ -57,7 +57,7 @@
 			};
 		};
 
-		usb0: ohci@300000 {
+		usb0: usb@300000 {
 			num-ports = <1>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/microchip/pm9g45.dts
index c349fd3758a6..2258e62f5864 100644
--- a/arch/arm/boot/dts/pm9g45.dts
+++ b/arch/arm/boot/dts/microchip/pm9g45.dts
@@ -139,12 +139,12 @@
 			};
 		};
 
-		usb0: ohci@700000 {
+		usb0: usb@700000 {
 			status = "okay";
 			num-ports = <2>;
 		};
 
-		usb1: ehci@800000 {
+		usb1: usb@800000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
new file mode 100644
index 000000000000..b075865e6a76
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -0,0 +1,1403 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sam9x60.dtsi - Device Tree Include file for Microchip SAM9X60 SoC
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Microchip SAM9X60 SoC";
+	compatible = "microchip,sam9x60";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x100000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usb0: gadget@500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "microchip,sam9x60-udc";
+			reg = <0x00500000 0x100000
+				0xf803c000 0x400>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		usb1: usb@600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: usb@700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "usb_clk", "ehci_clk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "microchip,sam9x60-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			microchip,sfr = <&sfr>;
+			reg = <0x10000000 0x60000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "microchip,sam9x60-nand-controller";
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		sdmmc0: sdio-host@80000000 {
+			compatible = "microchip,sam9x60-sdhci";
+			reg = <0x80000000 0x300>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		sdmmc1: sdio-host@90000000 {
+			compatible = "microchip,sam9x60-sdhci";
+			reg = <0x90000000 0x300>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			flx4: flexcom@f0000000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0000000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0000000 0x800>;
+				status = "disabled";
+
+				uart4: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi4: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c4: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx5: flexcom@f0004000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0004000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0004000 0x800>;
+				status = "disabled";
+
+				uart5: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi5: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c5: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			dma0: dma-controller@f0008000 {
+				compatible = "microchip,sam9x60-dma", "atmel,sama5d4-dma";
+				reg = <0xf0008000 0x1000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "dma_clk";
+			};
+
+			ssc: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(38))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(39))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			qspi: spi@f0014000 {
+				compatible = "microchip,sam9x60-qspi";
+				reg = <0xf0014000 0x100>, <0x70000000 0x10000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(26))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 19>;
+				clock-names = "pclk", "qspick";
+				atmel,pmc = <&pmc>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2s: i2s@f001c000 {
+				compatible = "microchip,sam9x60-i2smcc";
+				reg = <0xf001c000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(36))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(37))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			flx11: flexcom@f0020000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0020000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0020000 0x800>;
+				status = "disabled";
+
+				uart11: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(22))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(23))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c11: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(22))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(23))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx12: flexcom@f0024000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0024000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0024000 0x800>;
+				status = "disabled";
+
+				uart12: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(24))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(25))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c12: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(24))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(25))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			pit64b: timer@f0028000 {
+				compatible = "microchip,sam9x60-pit64b";
+				reg = <0xf0028000 0x100>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
+				clock-names = "pclk", "gclk";
+			};
+
+			sha: crypto@f002c000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf002c000 0x100>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(34))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "sha_clk";
+			};
+
+			trng: rng@f0030000 {
+				compatible = "microchip,sam9x60-trng";
+				reg = <0xf0030000 0x100>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			};
+
+			aes: crypto@f0034000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf0034000 0x100>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(32))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(33))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				clock-names = "aes_clk";
+			};
+
+			tdes: crypto@f0038000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xf0038000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(31))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(30))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "tdes_clk";
+			};
+
+			classd: classd@f003c000 {
+				compatible = "atmel,sama5d2-classd";
+				reg = <0xf003c000 0x100>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(35))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			can0: can@f8000000 {
+				compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+				reg = <0xf8000000 0x300>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8004000 {
+				compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+				reg = <0xf8004000 0x300>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k 0>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&clk32k 0>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			flx6: flexcom@f8010000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8010000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8010000 0x800>;
+				status = "disabled";
+
+				uart6: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c6: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx7: flexcom@f8014000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8014000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8014000 0x800>;
+				status = "disabled";
+
+				uart7: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c7: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx8: flexcom@f8018000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8018000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8018000 0x800>;
+				status = "disabled";
+
+				uart8: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c8: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx0: flexcom@f801c000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf801c000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf801c000 0x800>;
+				status = "disabled";
+
+				uart0: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi0: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c0: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx1: flexcom@f8020000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8020000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8020000 0x800>;
+				status = "disabled";
+
+				uart1: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(2))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(3))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi1: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(2))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(3))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c1: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(2))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(3))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx2: flexcom@f8024000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8024000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8024000 0x800>;
+				status = "disabled";
+
+				uart2: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(4))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(5))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi2: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(4))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(5))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c2: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(4))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(5))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx3: flexcom@f8028000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8028000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8028000 0x800>;
+				status = "disabled";
+
+				uart3: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(6))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(7))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi3: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(6))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(7))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c3: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(6))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(7))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			macb0: ethernet@f802c000 {
+				compatible = "cdns,sam9x60-macb", "cdns,macb";
+				reg = <0xf802c000 0x1000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			macb1: ethernet@f8030000 {
+				compatible = "cdns,sam9x60-macb", "cdns,macb";
+				reg = <0xf8030000 0x1000>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "microchip,sam9x60-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				compatible = "microchip,sam9x60-hlcdc";
+				reg = <0xf8038000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 25>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					#pwm-cells = <3>;
+				};
+			};
+
+			flx9: flexcom@f8040000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8040000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8040000 0x800>;
+				status = "disabled";
+
+				uart9: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c9: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx10: flexcom@f8044000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8044000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8044000 0x800>;
+				status = "disabled";
+
+				uart10: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(21))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c10: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(21))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			isi: isi@f8048000 {
+				compatible = "microchip,sam9x60-isi", "atmel,at91sam9g45-isi";
+				reg = <0xf8048000 0x100>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			adc: adc@f804c000 {
+				compatible = "microchip,sam9x60-adc", "atmel,sama5d2-adc";
+				reg = <0xf804c000 0x100>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				clock-names = "adc_clk";
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "rx";
+				atmel,min-sample-rate-hz = <200000>;
+				atmel,max-sample-rate-hz = <20000000>;
+				atmel,startup-time-ms = <4>;
+				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8050000 {
+				compatible = "microchip,sam9x60-sfr", "syscon";
+				reg = <0xf8050000 0x100>;
+			};
+
+			matrix: matrix@ffffde00 {
+				compatible = "microchip,sam9x60-matrix", "atmel,at91sam9x5-matrix", "syscon";
+				reg = <0xffffde00 0x200>;
+			};
+
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x300>,
+				      <0xffffe600 0x100>;
+			};
+
+			mpddrc: mpddrc@ffffe800 {
+				compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc";
+				reg = <0xffffe800 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			smc: smc@ffffea00 {
+				compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x100>;
+			};
+
+			aic: interrupt-controller@fffff100 {
+				compatible = "microchip,sam9x60-aic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0xfffff100 0x100>;
+				atmel,external-irqs = <31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(28))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "microchip,sam9x60-pinctrl", "simple-mfd";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				/* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */
+				atmel,mux-mask = <
+						 /*	A	B	C	*/
+						 0xffffffff 0xffe03fff 0xef00019d	/* pioA */
+						 0x03ffffff 0x02fc7e7f 0x00780000	/* pioB */
+						 0xffffffff 0xffffffff 0xf83fffff	/* pioC */
+						 0x003fffff 0x003f8000 0x00000000	/* pioD */
+						 >;
+
+				pioA: gpio@fffff400 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <26>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <22>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+				};
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "microchip,sam9x60-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+				clock-names = "td_slck", "md_slck", "main_xtal";
+			};
+
+			reset_controller: reset-controller@fffffe00 {
+				compatible = "microchip,sam9x60-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k 0>;
+			};
+
+			shutdown_controller: poweroff@fffffe10 {
+				compatible = "microchip,sam9x60-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,wakeup-rtc-timer;
+				atmel,wakeup-rtt-timer;
+				status = "disabled";
+			};
+
+			rtt: rtc@fffffe20 {
+				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
+				reg = <0xfffffe20 0x20>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 1>;
+			};
+
+			pit: timer@fffffe40 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			clk32k: clock-controller@fffffe50 {
+				compatible = "microchip,sam9x60-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <1>;
+			};
+
+			gpbr: syscon@fffffe60 {
+				compatible = "microchip,sam9x60-gpbr", "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffe60 0x10>;
+			};
+
+			rtc: rtc@fffffea8 {
+				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
+				reg = <0xfffffea8 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 1>;
+			};
+
+			watchdog: watchdog@ffffff80 {
+				compatible = "microchip,sam9x60-wdt";
+				reg = <0xffffff80 0x24>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 0>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi
new file mode 100644
index 000000000000..46dacbbd201d
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi
@@ -0,0 +1,1316 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sam9x7.dtsi - Device Tree Include file for Microchip SAM9X7 SoC family
+ *
+ * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Varshini Rajendran <varshini.rajendran@microchip.com>
+ */
+
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAM9X7 SoC";
+	compatible = "microchip,sam9x7";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			reg = <0>;
+			device_type = "cpu";
+		};
+	};
+
+	clocks {
+		slow_xtal: clock-slowxtal {
+			compatible = "fixed-clock";
+			clock-output-names = "slow_xtal";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: clock-mainxtal {
+			compatible = "fixed-clock";
+			clock-output-names = "main_xtal";
+			#clock-cells = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x300000 0x10000>;
+		ranges = <0 0x300000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sdmmc0: mmc@80000000 {
+			compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0x80000000 0x300>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@90000000 {
+			compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0x90000000 0x300>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+	};
+
+	apb {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flx4: flexcom@f0000000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf0000000 0x200>;
+			ranges = <0x0 0xf0000000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+			status = "disabled";
+
+			uart4: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi4: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx5: flexcom@f0004000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf0004000 0x200>;
+			ranges = <0x0 0xf0004000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+			status = "disabled";
+
+			uart5: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(10))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi5: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(10))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(10))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		dma0: dma-controller@f0008000 {
+			compatible = "microchip,sam9x7-dma", "atmel,sama5d4-dma";
+			reg = <0xf0008000 0x1000>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		ssc: ssc@f0010000 {
+			compatible = "microchip,sam9x7-ssc", "atmel,at91sam9g45-ssc";
+			reg = <0xf0010000 0x4000>;
+			interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+			clock-names = "pclk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(38))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(39))>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		qspi: spi@f0014000 {
+			compatible = "microchip,sam9x7-ospi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xf0014000 0x100>, <0x60000000 0x20000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>;
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				AT91_XDMAC_DT_PERID(26))>,
+				<&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				AT91_XDMAC_DT_PERID(27))>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_GCK 35>;
+			clock-names = "pclk", "gclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 35>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_PLLADIV2>;
+			status = "disabled";
+		};
+
+		i2s: i2s@f001c000 {
+			compatible = "microchip,sam9x7-i2smcc", "microchip,sam9x60-i2smcc";
+			reg = <0xf001c000 0x100>;
+			interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
+			clock-names = "pclk", "gclk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(36))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(37))>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		flx11: flexcom@f0020000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf0020000 0x200>;
+			ranges = <0x0 0xf0020000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+			status = "disabled";
+
+			uart11: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(22))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(23))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(22))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(23))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx12: flexcom@f0024000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf0024000 0x200>;
+			ranges = <0x0 0xf0024000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+			status = "disabled";
+
+			uart12: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(24))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(24))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		pit64b0: timer@f0028000 {
+			compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xf0028000 0x100>;
+			interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
+			clock-names = "pclk", "gclk";
+		};
+
+		sha: crypto@f002c000 {
+			compatible = "microchip,sam9x7-sha", "atmel,at91sam9g46-sha";
+			reg = <0xf002c000 0x100>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+			clock-names = "sha_clk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(34))>;
+			dma-names = "tx";
+		};
+
+		trng: rng@f0030000 {
+			compatible = "microchip,sam9x7-trng", "microchip,sam9x60-trng";
+			reg = <0xf0030000 0x100>;
+			interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			status = "disabled";
+		};
+
+		aes: crypto@f0034000 {
+			compatible = "microchip,sam9x7-aes", "atmel,at91sam9g46-aes";
+			reg = <0xf0034000 0x100>;
+			interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+			clock-names = "aes_clk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(32))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(33))>;
+			dma-names = "tx", "rx";
+		};
+
+		tdes: crypto@f0038000 {
+			compatible = "microchip,sam9x7-tdes", "atmel,at91sam9g46-tdes";
+			reg = <0xf0038000 0x100>;
+			interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+			clock-names = "tdes_clk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(31))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(30))>;
+			dma-names = "tx", "rx";
+		};
+
+		classd: sound@f003c000 {
+			compatible = "microchip,sam9x7-classd", "atmel,sama5d2-classd";
+			reg = <0xf003c000 0x100>;
+			interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
+			clock-names = "pclk", "gclk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(35))>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		pit64b1: timer@f0040000 {
+			compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xf0040000 0x100>;
+			interrupts = <58 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
+			clock-names = "pclk", "gclk";
+		};
+
+		can0: can@f8000000 {
+			compatible = "bosch,m_can";
+			reg = <0xf8000000 0x100>, <0x300000 0x7800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <68 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_GCK 29>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 29>;
+			assigned-clock-rates = <480000000>, <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@f8004000 {
+			compatible = "bosch,m_can";
+			reg = <0xf8004000 0x100>, <0x300000 0xbc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <69 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 30>, <&pmc PMC_TYPE_GCK 30>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 30>;
+			assigned-clock-rates = <480000000>, <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		tcb: timer@f8008000 {
+			compatible = "microchip,sam9x7-tcb","atmel,sama5d2-tcb", "simple-mfd", "syscon";
+			reg = <0xf8008000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_GCK 17>, <&clk32k 0>;
+			clock-names = "t0_clk", "gclk", "slow_clk";
+		};
+
+		flx6: flexcom@f8010000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8010000 0x200>;
+			ranges = <0x0 0xf8010000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+			status = "disabled";
+
+			uart6: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(12))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(13))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(12))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(13))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx7: flexcom@f8014000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8014000 0x200>;
+			ranges = <0x0 0xf8014000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+			status = "disabled";
+
+			uart7: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(14))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(15))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(14))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(15))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx8: flexcom@f8018000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8018000 0x200>;
+			ranges = <0x0 0xf8018000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+			status = "disabled";
+
+			uart8: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(16))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(17))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(16))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(17))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx0: flexcom@f801c000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf801c000 0x200>;
+			ranges = <0x0 0xf801c000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+			status = "disabled";
+
+			uart0: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi0: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@f8020000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8020000 0x200>;
+			ranges = <0x0 0xf8020000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+			status = "disabled";
+
+			uart1: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi1: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx2: flexcom@f8024000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8024000 0x200>;
+			ranges = <0x0 0xf8024000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+			status = "disabled";
+
+			uart2: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(4))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(5))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi2: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(4))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(5))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(4))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(5))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@f8028000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8028000 0x200>;
+			ranges = <0x0 0xf8028000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+			status = "disabled";
+
+			uart3: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi3: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		gmac: ethernet@f802c000 {
+			compatible = "microchip,sam9x7-gem", "microchip,sama7g5-gem";
+			reg = <0xf802c000 0x1000>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 0 */
+				     <60 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 1 */
+				     <61 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 2 */
+				     <62 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 3 */
+				     <63 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 4 */
+				     <64 IRQ_TYPE_LEVEL_HIGH 3>;	/* Queue 5 */
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_GCK 24>, <&pmc PMC_TYPE_GCK 67>;
+			clock-names = "hclk", "pclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 67>;
+			assigned-clock-rates = <266666666>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@f8034000 {
+			compatible = "microchip,sam9x7-pwm", "microchip,sam9x60-pwm";
+			reg = <0xf8034000 0x300>;
+			interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		hlcdc: hlcdc@f8038000 {
+			compatible = "microchip,sam9x75-xlcdc";
+			reg = <0xf8038000 0x4000>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>;
+			clock-names = "periph_clk", "sys_clk", "slow_clk";
+			status = "disabled";
+
+			display-controller {
+				compatible = "atmel,hlcdc-display-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			pwm {
+				compatible = "atmel,hlcdc-pwm";
+				#pwm-cells = <3>;
+			};
+		};
+
+		flx9: flexcom@f8040000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8040000 0x200>;
+			ranges = <0x0 0xf8040000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+			status = "disabled";
+
+			uart9: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(18))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(19))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(18))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(19))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx10: flexcom@f8044000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8044000 0x200>;
+			ranges = <0x0 0xf8044000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+			status = "disabled";
+
+			uart10: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(20))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(21))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(20))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(21))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		lvds_controller: lvds-controller@f8060000 {
+			compatible = "microchip,sam9x75-lvds";
+			reg = <0xf8060000 0x100>;
+			interrupts = <56 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+			clock-names = "pclk";
+			status = "disabled";
+		};
+
+		matrix: matrix@ffffde00 {
+			compatible = "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon";
+			reg = <0xffffde00 0x200>;
+		};
+
+		pmecc: ecc-engine@ffffe000 {
+			compatible = "microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc";
+			reg = <0xffffe000 0x300>, <0xffffe600 0x100>;
+		};
+
+		mpddrc: mpddrc@ffffe800 {
+			compatible = "microchip,sam9x7-ddramc", "atmel,sama5d3-ddramc";
+			reg = <0xffffe800 0x200>;
+			clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
+			clock-names = "ddrck", "mpddr";
+		};
+
+		smc: smc@ffffea00 {
+			compatible = "microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon";
+			reg = <0xffffea00 0x100>;
+		};
+
+		aic: interrupt-controller@fffff100 {
+			compatible = "microchip,sam9x7-aic";
+			reg = <0xfffff100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			atmel,external-irqs = <31>;
+		};
+
+		dbgu: serial@fffff200 {
+			compatible = "microchip,sam9x7-dbgu", "atmel,at91sam9260-dbgu", "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+			reg = <0xfffff200 0x200>;
+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+			clock-names = "usart";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(28))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(29))>;
+			dma-names = "tx", "rx";
+			atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@fffff400 {
+			compatible = "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl", "simple-mfd";
+			ranges = <0xfffff400 0xfffff400 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* mux-mask corresponding to sam9x7 SoC in TFBGA228L package */
+			atmel,mux-mask = <
+					 /*  A		B	   C	      D	  */
+					 0xffffffff 0xffffefc0 0xc0ffd000 0x00000000	/* pioA */
+					 0x07ffffff 0x0805fe7f 0x01ff9f81 0x06078000	/* pioB */
+					 0xffffffff 0x07dfffff 0xfa3fffff 0x00000000	/* pioC */
+					 0x00003fff 0x00003fe0 0x0000003f 0x00000000	/* pioD */
+					 >;
+
+			pioA: gpio@fffff400 {
+				compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x200>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				gpio-controller;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+			};
+
+			pioB: gpio@fffff600 {
+				compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x200>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				gpio-controller;
+				#gpio-lines = <26>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+			};
+
+			pioC: gpio@fffff800 {
+				compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x200>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				gpio-controller;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+			};
+
+			pioD: gpio@fffffa00 {
+				compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x200>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				gpio-controller;
+				#gpio-lines = <22>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+			};
+		};
+
+		pmc: clock-controller@fffffc00 {
+			compatible = "microchip,sam9x7-pmc", "syscon";
+			reg = <0xfffffc00 0x200>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			#clock-cells = <2>;
+			clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+			clock-names = "td_slck", "md_slck", "main_xtal";
+		};
+
+		reset_controller: reset-controller@fffffe00 {
+			compatible = "microchip,sam9x7-rstc", "microchip,sam9x60-rstc";
+			reg = <0xfffffe00 0x10>;
+			clocks = <&clk32k 0>;
+		};
+
+		poweroff: poweroff@fffffe10 {
+			compatible = "microchip,sam9x7-shdwc", "microchip,sam9x60-shdwc";
+			reg = <0xfffffe10 0x10>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk32k 0>;
+			atmel,wakeup-rtc-timer;
+			atmel,wakeup-rtt-timer;
+			status = "disabled";
+		};
+
+		rtt: rtc@fffffe20 {
+			compatible = "microchip,sam9x7-rtt", "atmel,at91sam9260-rtt";
+			reg = <0xfffffe20 0x20>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&clk32k 0>;
+		};
+
+		clk32k: clock-controller@fffffe50 {
+			compatible = "microchip,sam9x7-sckc", "microchip,sam9x60-sckc";
+			reg = <0xfffffe50 0x4>;
+			clocks = <&slow_xtal>;
+			#clock-cells = <1>;
+		};
+
+		gpbr: syscon@fffffe60 {
+			compatible = "microchip,sam9x7-gpbr", "atmel,at91sam9260-gpbr", "syscon";
+			reg = <0xfffffe60 0x10>;
+		};
+
+		rtc: rtc@fffffea8 {
+			compatible = "microchip,sam9x7-rtc", "microchip,sam9x60-rtc";
+			reg = <0xfffffea8 0x100>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&clk32k 0>;
+		};
+
+		watchdog: watchdog@ffffff80 {
+			compatible = "microchip,sam9x7-wdt", "microchip,sam9x60-wdt";
+			reg = <0xffffff80 0x24>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/microchip/sama5d2-pinfunc.h
index 28a2e45752fe..28a2e45752fe 100644
--- a/arch/arm/boot/dts/sama5d2-pinfunc.h
+++ b/arch/arm/boot/dts/microchip/sama5d2-pinfunc.h
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/microchip/sama5d2.dtsi
index 2c50a021aa76..17430d7f2055 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d2.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 #include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
 
 / {
@@ -31,6 +32,8 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a5";
 			reg = <0>;
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
 			next-level-cache = <&L2>;
 		};
 	};
@@ -135,7 +138,7 @@
 			status = "disabled";
 		};
 
-		usb1: ohci@400000 {
+		usb1: usb@400000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00400000 0x100000>;
 			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -144,7 +147,7 @@
 			status = "disabled";
 		};
 
-		usb2: ehci@500000 {
+		usb2: usb@500000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -159,6 +162,7 @@
 			interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>;
 			cache-unified;
 			cache-level = <2>;
+			cache-size = <0x20000>;		// L2, 128 KB
 		};
 
 		ebi: ebi@10000000 {
@@ -283,7 +287,7 @@
 				clock-names = "dma_clk";
 			};
 
-			pmc: pmc@f0014000 {
+			pmc: clock-controller@f0014000 {
 				compatible = "atmel,sama5d2-pmc", "syscon";
 				reg = <0xf0014000 0x160>;
 				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -381,9 +385,9 @@
 			macb0: ethernet@f8008000 {
 				compatible = "atmel,sama5d2-gem";
 				reg = <0xf8008000 0x1000>;
-				interrupts = <5  IRQ_TYPE_LEVEL_HIGH 3		/* Queue 0 */
-					      66 IRQ_TYPE_LEVEL_HIGH 3          /* Queue 1 */
-					      67 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 2 */
+				interrupts = <5  IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 0 */
+					     <66 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 1 */
+					     <67 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 2 */
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
@@ -441,6 +445,7 @@
 			uart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -457,6 +462,7 @@
 			uart1: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -473,6 +479,7 @@
 			uart2: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -530,6 +537,7 @@
 				uart5: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
 					clock-names = "usart";
@@ -600,6 +608,7 @@
 				uart6: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
 					clock-names = "usart";
@@ -674,7 +683,7 @@
 				clocks = <&clk32k>;
 			};
 
-			shutdown_controller: shdwc@f8048010 {
+			shutdown_controller: poweroff@f8048010 {
 				compatible = "atmel,sama5d2-shdwc";
 				reg = <0xf8048010 0x10>;
 				clocks = <&clk32k>;
@@ -698,10 +707,9 @@
 				status = "disabled";
 			};
 
-			clk32k: sckc@f8048050 {
+			clk32k: clock-controller@f8048050 {
 				compatible = "atmel,sama5d4-sckc";
 				reg = <0xf8048050 0x4>;
-
 				clocks = <&slow_xtal>;
 				#clock-cells = <0>;
 			};
@@ -769,6 +777,7 @@
 			uart3: serial@fc008000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc008000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma1
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -785,6 +794,7 @@
 			uart4: serial@fc00c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc00c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 					 AT91_XDMAC_DT_PERID(43))>,
@@ -810,6 +820,7 @@
 				uart7: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
 					clock-names = "usart";
@@ -880,6 +891,7 @@
 				uart8: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
 					clock-names = "usart";
@@ -951,6 +963,7 @@
 				uart9: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
 					clock-names = "usart";
@@ -1009,7 +1022,7 @@
 				};
 			};
 
-			trng@fc01c000 {
+			trng: rng@fc01c000 {
 				compatible = "atmel,at91sam9g45-trng";
 				reg = <0xfc01c000 0x100>;
 				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>;
diff --git a/arch/arm/boot/dts/sama5d29.dtsi b/arch/arm/boot/dts/microchip/sama5d29.dtsi
index 17991c28a256..17991c28a256 100644
--- a/arch/arm/boot/dts/sama5d29.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d29.dtsi
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/microchip/sama5d3.dtsi
index 2d0935ad2225..00ba59ac1968 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -47,6 +48,8 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a5";
 			reg = <0x0>;
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
 		};
 	};
 
@@ -73,7 +76,7 @@
 			clock-frequency = <0>;
 		};
 
-		adc_op_clk: adc_op_clk{
+		adc_op_clk: adc_op_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <1000000>;
@@ -194,6 +197,7 @@
 			usart0: serial@f001c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf001c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
 				       <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -208,6 +212,7 @@
 			usart1: serial@f0020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf0020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>,
 				       <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -222,6 +227,7 @@
 			uart0: serial@f0024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf0024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
@@ -356,6 +362,7 @@
 			usart2: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>,
 				       <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -370,6 +377,7 @@
 			usart3: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>,
 				       <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -413,7 +421,7 @@
 				clock-names = "tdes_clk";
 			};
 
-			trng@f8040000 {
+			trng: rng@f8040000 {
 				compatible = "atmel,at91sam9g45-trng";
 				reg = <0xf8040000 0x100>;
 				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -464,6 +472,7 @@
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
 				       <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -486,7 +495,7 @@
 			pinctrl: pinctrl@fffff200 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
+				compatible = "atmel,sama5d3-pinctrl", "simple-mfd";
 				ranges = <0xfffff200 0xfffff200 0xa00>;
 				atmel,mux-mask = <
 					/*   A          B          C  */
@@ -994,7 +1003,7 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,sama5d3-pmc", "syscon";
 				reg = <0xfffffc00 0x120>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -1009,7 +1018,7 @@
 				clocks = <&clk32k>;
 			};
 
-			shutdown_controller: shutdown-controller@fffffe10 {
+			shutdown_controller: poweroff@fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
 				clocks = <&clk32k>;
@@ -1033,7 +1042,7 @@
 				status = "disabled";
 			};
 
-			clk32k: sckc@fffffe50 {
+			clk32k: clock-controller@fffffe50 {
 				compatible = "atmel,sama5d3-sckc";
 				reg = <0xfffffe50 0x4>;
 				clocks = <&slow_xtal>;
@@ -1067,7 +1076,7 @@
 			status = "disabled";
 		};
 
-		usb1: ohci@600000 {
+		usb1: usb@600000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -1076,7 +1085,7 @@
 			status = "disabled";
 		};
 
-		usb2: ehci@700000 {
+		usb2: usb@700000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
diff --git a/arch/arm/boot/dts/sama5d31.dtsi b/arch/arm/boot/dts/microchip/sama5d31.dtsi
index cbe8f275ecc4..cbe8f275ecc4 100644
--- a/arch/arm/boot/dts/sama5d31.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d31.dtsi
diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/microchip/sama5d31ek.dts
index 10fc80d6d30d..1f2dfb3127ab 100644
--- a/arch/arm/boot/dts/sama5d31ek.dts
+++ b/arch/arm/boot/dts/microchip/sama5d31ek.dts
@@ -40,7 +40,7 @@
 	};
 
 	leds {
-		d3 {
+		led-d3 {
 			label = "d3";
 			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/sama5d33.dtsi b/arch/arm/boot/dts/microchip/sama5d33.dtsi
index 146fd59acea5..146fd59acea5 100644
--- a/arch/arm/boot/dts/sama5d33.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d33.dtsi
diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/microchip/sama5d33ek.dts
index 7d4ae1682933..7d4ae1682933 100644
--- a/arch/arm/boot/dts/sama5d33ek.dts
+++ b/arch/arm/boot/dts/microchip/sama5d33ek.dts
diff --git a/arch/arm/boot/dts/sama5d34.dtsi b/arch/arm/boot/dts/microchip/sama5d34.dtsi
index 132918c889a0..132918c889a0 100644
--- a/arch/arm/boot/dts/sama5d34.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d34.dtsi
diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/microchip/sama5d34ek.dts
index 2335bf906f69..18943b873fff 100644
--- a/arch/arm/boot/dts/sama5d34ek.dts
+++ b/arch/arm/boot/dts/microchip/sama5d34ek.dts
@@ -36,7 +36,7 @@
 			i2c1: i2c@f0018000 {
 				status = "okay";
 
-				24c256@50 {
+				eeprom@50 {
 					compatible = "atmel,24c256";
 					reg = <0x50>;
 					pagesize = <64>;
@@ -50,7 +50,7 @@
 	};
 
 	leds {
-		d3 {
+		led-d3 {
 			label = "d3";
 			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/sama5d35.dtsi b/arch/arm/boot/dts/microchip/sama5d35.dtsi
index b2ccfa77c4be..b2ccfa77c4be 100644
--- a/arch/arm/boot/dts/sama5d35.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d35.dtsi
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/microchip/sama5d35ek.dts
index 8edfcebb1df0..8edfcebb1df0 100644
--- a/arch/arm/boot/dts/sama5d35ek.dts
+++ b/arch/arm/boot/dts/microchip/sama5d35ek.dts
diff --git a/arch/arm/boot/dts/sama5d36.dtsi b/arch/arm/boot/dts/microchip/sama5d36.dtsi
index 5d88f9967138..5d88f9967138 100644
--- a/arch/arm/boot/dts/sama5d36.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d36.dtsi
diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/microchip/sama5d36ek.dts
index 26950f9284c2..26950f9284c2 100644
--- a/arch/arm/boot/dts/sama5d36ek.dts
+++ b/arch/arm/boot/dts/microchip/sama5d36ek.dts
diff --git a/arch/arm/boot/dts/sama5d36ek_cmp.dts b/arch/arm/boot/dts/microchip/sama5d36ek_cmp.dts
index 66695b9a3e77..66695b9a3e77 100644
--- a/arch/arm/boot/dts/sama5d36ek_cmp.dts
+++ b/arch/arm/boot/dts/microchip/sama5d36ek_cmp.dts
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/microchip/sama5d3_can.dtsi
index 9ac29bf3f933..9ac29bf3f933 100644
--- a/arch/arm/boot/dts/sama5d3_can.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_can.dtsi
diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/microchip/sama5d3_emac.dtsi
index 45226108850d..5d7ce13de8cc 100644
--- a/arch/arm/boot/dts/sama5d3_emac.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_emac.dtsi
@@ -30,7 +30,7 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 			};
 
 			macb1: ethernet@f802c000 {
diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/microchip/sama5d3_gmac.dtsi
index 884df7a54dbb..884df7a54dbb 100644
--- a/arch/arm/boot/dts/sama5d3_gmac.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_gmac.dtsi
diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/microchip/sama5d3_lcd.dtsi
index 308d2fc276d6..308d2fc276d6 100644
--- a/arch/arm/boot/dts/sama5d3_lcd.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_lcd.dtsi
diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/microchip/sama5d3_mci2.dtsi
index 7141ee97ec3e..7141ee97ec3e 100644
--- a/arch/arm/boot/dts/sama5d3_mci2.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_mci2.dtsi
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/microchip/sama5d3_tcb1.dtsi
index 2b18c5c2cc03..2b18c5c2cc03 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_tcb1.dtsi
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/microchip/sama5d3_uart.dtsi
index a3eaba995cf4..44d1173f2ffb 100644
--- a/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_uart.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	aliases {
@@ -39,6 +40,7 @@
 			uart0: serial@f0024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf0024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
@@ -50,6 +52,7 @@
 			uart1: serial@f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/microchip/sama5d3xcm.dtsi
index 384335635792..7d1d7859edb4 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xcm.dtsi
@@ -130,7 +130,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		d2 {
+		led-d2 {
 			label = "d2";
 			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;	/* PE25, conflicts with A25, RXD2 */
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi
index 5579c955f141..362806afef44 100644
--- a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi
@@ -79,7 +79,7 @@
 			};
 
 			i2c1: i2c@f0018000 {
-				pmic: act8865@5b {
+				act8865: pmic@5b {
 					compatible = "active-semi,act8865";
 					reg = <0x5b>;
 					status = "disabled";
@@ -184,7 +184,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		d2 {
+		led-d2 {
 			label = "d2";
 			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/microchip/sama5d3xdm.dtsi
index 3c1c4d62fbf9..3c1c4d62fbf9 100644
--- a/arch/arm/boot/dts/sama5d3xdm.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xdm.dtsi
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi
index 3652c9e24124..90da04b84b39 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi
@@ -172,7 +172,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@600000 {
+		usb1: usb@600000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH
 					   &pioD 26 GPIO_ACTIVE_LOW
@@ -181,7 +181,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@700000 {
+		usb2: usb@700000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb_cmp.dtsi
index 5d9e97fecf83..5d9e97fecf83 100644
--- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xmb_cmp.dtsi
diff --git a/arch/arm/boot/dts/sama5d3xmb_emac.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb_emac.dtsi
index a5dd41cd9522..a5dd41cd9522 100644
--- a/arch/arm/boot/dts/sama5d3xmb_emac.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xmb_emac.dtsi
diff --git a/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb_gmac.dtsi
index d750da38ff3c..d750da38ff3c 100644
--- a/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xmb_gmac.dtsi
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/microchip/sama5d4.dtsi
index 1e5c01898ccf..ec1d68c640de 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d4.dtsi
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/clock/at91.h>
 #include <dt-bindings/dma/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -49,6 +50,8 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a5";
 			reg = <0>;
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
 			next-level-cache = <&L2>;
 		};
 	};
@@ -71,7 +74,7 @@
 			clock-frequency = <0>;
 		};
 
-		adc_op_clk: adc_op_clk{
+		adc_op_clk: adc_op_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <1000000>;
@@ -118,7 +121,7 @@
 			status = "disabled";
 		};
 
-		usb1: ohci@500000 {
+		usb1: usb@500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -127,7 +130,7 @@
 			status = "disabled";
 		};
 
-		usb2: ehci@600000 {
+		usb2: usb@600000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -142,6 +145,7 @@
 			interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>;
 			cache-unified;
 			cache-level = <2>;
+			cache-size = <0x20000>;		// L2, 128 KB
 		};
 
 		ebi: ebi@10000000 {
@@ -249,7 +253,7 @@
 				clock-names = "dma_clk";
 			};
 
-			pmc: pmc@f0018000 {
+			pmc: clock-controller@f0018000 {
 				compatible = "atmel,sama5d4-pmc", "syscon";
 				reg = <0xf0018000 0x120>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -278,6 +282,7 @@
 			uart0: serial@f8004000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8004000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -437,6 +442,7 @@
 			usart0: serial@f802c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf802c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -455,6 +461,7 @@
 			usart1: serial@f8030000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8030000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -490,6 +497,7 @@
 			uart1: serial@fc004000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc004000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -508,6 +516,7 @@
 			usart2: serial@fc008000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc008000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -526,6 +535,7 @@
 			usart3: serial@fc00c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc00c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -544,6 +554,7 @@
 			usart4: serial@fc010000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc010000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -650,7 +661,7 @@
 				status = "disabled";
 			};
 
-			trng@fc030000 {
+			trng: rng@fc030000 {
 				compatible = "atmel,at91sam9g45-trng";
 				reg = <0xfc030000 0x100>;
 				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -686,7 +697,7 @@
 				clock-names = "aes_clk";
 			};
 
-			tdes: crpyto@fc04c000 {
+			tdes: crypto@fc04c000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xfc04c000 0x100>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -732,7 +743,7 @@
 				clocks = <&clk32k>;
 			};
 
-			shutdown_controller: shdwc@fc068610 {
+			shutdown_controller: poweroff@fc068610 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfc068610 0x10>;
 				clocks = <&clk32k>;
@@ -753,7 +764,7 @@
 				status = "disabled";
 			};
 
-			clk32k: sckc@fc068650 {
+			clk32k: clock-controller@fc068650 {
 				compatible = "atmel,sama5d4-sckc";
 				reg = <0xfc068650 0x4>;
 				#clock-cells = <0>;
@@ -770,6 +781,7 @@
 			dbgu: serial@fc069000 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfc069000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -782,7 +794,7 @@
 			pinctrl: pinctrl@fc06a000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
+				compatible = "atmel,sama5d3-pinctrl", "simple-mfd";
 				ranges = <0xfc068000 0xfc068000 0x100
 					  0xfc06a000 0xfc06a000 0x4000>;
 				/* WARNING: revisit as pin spec has changed */
diff --git a/arch/arm/boot/dts/microchip/sama7d65-pinfunc.h b/arch/arm/boot/dts/microchip/sama7d65-pinfunc.h
new file mode 100644
index 000000000000..c591f333cacb
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama7d65-pinfunc.h
@@ -0,0 +1,947 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0				0
+#define PIN_PA0__GPIO			PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK		PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__NWER0			PINMUX_PIN(PIN_PA0, 3, 1)
+
+#define PIN_PA1				1
+#define PIN_PA1__GPIO			PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD		PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__A21			PINMUX_PIN(PIN_PA1, 3, 1)
+
+#define PIN_PA2				2
+#define PIN_PA2__GPIO			PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_RSTN		PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__A22			PINMUX_PIN(PIN_PA2, 3, 1)
+
+#define PIN_PA3				3
+#define PIN_PA3__GPIO			PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT0		PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__D0			PINMUX_PIN(PIN_PA3, 3, 1)
+
+#define PIN_PA4				4
+#define PIN_PA4__GPIO			PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT1		PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__D1			PINMUX_PIN(PIN_PA4, 3, 1)
+
+#define PIN_PA5				5
+#define PIN_PA5__GPIO			PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT4		PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA5, 2, 3)
+#define PIN_PA5__D4			PINMUX_PIN(PIN_PA5, 3, 1)
+#define PIN_PA5__TCLK4			PINMUX_PIN(PIN_PA5, 6, 3)
+
+#define PIN_PA6				6
+#define PIN_PA6__GPIO			PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT5		PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA6, 2, 3)
+#define PIN_PA6__D5			PINMUX_PIN(PIN_PA6, 3, 1)
+#define PIN_PA6__TIOB4			PINMUX_PIN(PIN_PA6, 6, 3)
+
+#define PIN_PA7				7
+#define PIN_PA7__GPIO			PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT6		PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__FLEXCOM2_IO2		PINMUX_PIN(PIN_PA7, 2, 3)
+#define PIN_PA7__D6			PINMUX_PIN(PIN_PA7, 3, 1)
+#define PIN_PA7__TIOA4			PINMUX_PIN(PIN_PA7, 6, 3)
+
+#define PIN_PA8				8
+#define PIN_PA8__GPIO			PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT7		PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__FLEXCOM2_IO3		PINMUX_PIN(PIN_PA8, 2, 3)
+#define PIN_PA8__D7			PINMUX_PIN(PIN_PA8, 3, 1)
+#define PIN_PA8__TIOA5			PINMUX_PIN(PIN_PA8, 6, 3)
+
+#define PIN_PA9				9
+#define PIN_PA9__GPIO			PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT2		PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__FLEXCOM0_IO2		PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__D2			PINMUX_PIN(PIN_PA9, 3, 1)
+#define PIN_PA9__TIOB5			PINMUX_PIN(PIN_PA9, 6, 3)
+
+#define PIN_PA10			10
+#define PIN_PA10__GPIO			PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_DAT3		PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__FLEXCOM0_IO3		PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__D3			PINMUX_PIN(PIN_PA10, 3, 1)
+#define PIN_PA10__TCLK5			PINMUX_PIN(PIN_PA10, 6, 3)
+
+#define PIN_PA11			11
+#define PIN_PA11__GPIO			PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_DS		PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__FLEXCOM0_IO4		PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__NANDRDY		PINMUX_PIN(PIN_PA11, 3, 1)
+#define PIN_PA11__TIOB3			PINMUX_PIN(PIN_PA11, 6, 3)
+
+#define PIN_PA12			12
+#define PIN_PA12__GPIO			PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__FLEXCOM0_IO0		PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__NRD			PINMUX_PIN(PIN_PA12, 3, 1)
+#define PIN_PA12__PCK0			PINMUX_PIN(PIN_PA12, 4, 1)
+#define PIN_PA12__EXT_IRQ0		PINMUX_PIN(PIN_PA12, 5, 1)
+#define PIN_PA12__TIOA3			PINMUX_PIN(PIN_PA12, 6, 3)
+
+#define PIN_PA13			13
+#define PIN_PA13__GPIO			PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__FLEXCOM0_IO1		PINMUX_PIN(PIN_PA13, 2, 1)
+#define PIN_PA13__NCS0			PINMUX_PIN(PIN_PA13, 3, 1)
+#define PIN_PA13__PCK1			PINMUX_PIN(PIN_PA13, 4, 1)
+#define PIN_PA13__TCLK3			PINMUX_PIN(PIN_PA13, 6, 3)
+
+#define PIN_PA14			14
+#define PIN_PA14__GPIO			PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__FLEXCOM4_IO4		PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__SDMMC0_WP		PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA14, 3, 4)
+
+#define PIN_PA15			15
+#define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__FLEXCOM4_IO3		PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__SDMMC0_1V8SEL		PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA15, 3, 4)
+
+#define PIN_PA16			16
+#define PIN_PA16__GPIO			PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__FLEXCOM4_IO2		PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__SDMMCo_CD		PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__PCK2			PINMUX_PIN(PIN_PA16, 4, 1)
+#define PIN_PA16__EXT_IRQ1		PINMUX_PIN(PIN_PA16, 5, 1)
+
+#define PIN_PA17			17
+#define PIN_PA17__GPIO			PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__FLEXCOM4_IO1		PINMUX_PIN(PIN_PA17, 1, 1)
+
+#define PIN_PA18			18
+#define PIN_PA18__GPIO			PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__FLEXCOM4_IO0		PINMUX_PIN(PIN_PA18, 1, 1)
+
+#define PIN_PA19			19
+#define PIN_PA19__GPIO			PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__TK0			PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__FLEXCOM4_IO5		PINMUX_PIN(PIN_PA19, 3, 1)
+#define PIN_PA19__PWML0			PINMUX_PIN(PIN_PA19, 4, 3)
+
+#define PIN_PA20			20
+#define PIN_PA20__GPIO			PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__TD0			PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA20, 2, 2)
+#define PIN_PA20__FLEXCOM4_IO6		PINMUX_PIN(PIN_PA20, 3, 1)
+#define PIN_PA20__PWMH0			PINMUX_PIN(PIN_PA20, 4, 3)
+
+#define PIN_PA21			21
+#define PIN_PA21__GPIO			PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__TF0			PINMUX_PIN(PIN_PA21, 1, 1)
+#define PIN_PA21__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA21, 2, 2)
+#define PIN_PA21__PWML1			PINMUX_PIN(PIN_PA21, 4, 3)
+
+#define PIN_PA22			22
+#define PIN_PA22__GPIO			PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__RD0			PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA22, 2, 2)
+#define PIN_PA22__PDMC0_DS1		PINMUX_PIN(PIN_PA22, 3, 1)
+#define PIN_PA22__PWMH1			PINMUX_PIN(PIN_PA22, 4, 3)
+
+#define PIN_PA23			23
+#define PIN_PA23__GPIO			PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__RK0			PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA23, 2, 2)
+#define PIN_PA23__PDMC0_CLK		PINMUX_PIN(PIN_PA23, 3, 1)
+#define PIN_PA23__PWML2			PINMUX_PIN(PIN_PA23, 4, 3)
+
+#define PIN_PA24			24
+#define PIN_PA24__GPIO			PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__RF0			PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA24, 2, 2)
+#define PIN_PA24__PDMC0_DS0		PINMUX_PIN(PIN_PA24, 3, 1)
+#define PIN_PA24__PWMH2			PINMUX_PIN(PIN_PA24, 4, 3)
+
+#define PIN_PA25			25
+#define PIN_PA25__GPIO			PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__G0_TXCTL		PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__FLEXCOM6_IO2		PINMUX_PIN(PIN_PA25, 2, 1)
+
+#define PIN_PA26			26
+#define PIN_PA26__GPIO			PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__G0_TX0		PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__FLEXCOM6_IO3		PINMUX_PIN(PIN_PA26, 2, 1)
+
+#define PIN_PA27			27
+#define PIN_PA27__GPIO			PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__G0_TX1		PINMUX_PIN(PIN_PA27, 1, 1)
+#define PIN_PA27__FLEXCOM6_IO4		PINMUX_PIN(PIN_PA27, 2, 1)
+
+#define PIN_PA28			28
+#define PIN_PA28__GPIO			PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__G0_RXCTL		PINMUX_PIN(PIN_PA28, 1, 1)
+#define PIN_PA28__FLEXCOM6_IO0		PINMUX_PIN(PIN_PA28, 2, 1)
+
+#define PIN_PA29			29
+#define PIN_PA29__GPIO			PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__G0_RX0		PINMUX_PIN(PIN_PA29, 1, 1)
+#define PIN_PA29__FLEXCOM6_IO1		PINMUX_PIN(PIN_PA29, 2, 1)
+
+#define PIN_PA30			30
+#define PIN_PA30__GPIO			PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__G0_RX1		PINMUX_PIN(PIN_PA30, 1, 1)
+#define PIN_PA30__FLEXCOM8_IO0		PINMUX_PIN(PIN_PA30, 2, 1)
+
+#define PIN_PA31			31
+#define PIN_PA31__GPIO			PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__G0_MDC		PINMUX_PIN(PIN_PA31, 1, 1)
+#define PIN_PA31__FLEXCOM8_IO1		PINMUX_PIN(PIN_PA31, 2, 1)
+
+#define PIN_PB0				32
+#define PIN_PB0__GPIO			PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__G0_MDIO		PINMUX_PIN(PIN_PB0, 1, 1)
+#define PIN_PB0__FLEXCOM8_IO3		PINMUX_PIN(PIN_PB0, 2, 2)
+
+#define PIN_PB1				33
+#define PIN_PB1__GPIO			PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__G0_REFCK		PINMUX_PIN(PIN_PB1, 1, 2)
+#define PIN_PB1__FLEXCOM8_IO2		PINMUX_PIN(PIN_PB1, 2, 1)
+
+#define PIN_PB2				34
+#define PIN_PB2__GPIO			PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__G0_RX2			PINMUX_PIN(PIN_PB2, 1, 1)
+#define PIN_PB2__FLEXCOM8_IO4		PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__G0_RXER		PINMUX_PIN(PIN_PB2, 3, 2)
+#define PIN_PB2__RK0			PINMUX_PIN(PIN_PB2, 4, 2)
+
+#define PIN_PB3				35
+#define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__G0_RXCK		PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__FLEXCOM10_IO2		PINMUX_PIN(PIN_PB3, 2, 2)
+#define PIN_PB3__TK0			PINMUX_PIN(PIN_PB3, 4, 2)
+
+#define PIN_PB4				36
+#define PIN_PB4__GPIO			PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__G0_TX2			PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__FLEXCOM10_IO3		PINMUX_PIN(PIN_PB4, 2, 2)
+#define PIN_PB4__TF0			PINMUX_PIN(PIN_PB4, 4, 2)
+
+#define PIN_PB5				37
+#define PIN_PB5__GPIO			PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__G0_TX3			PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__FLEXCOM10_IO4		PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__TD0			PINMUX_PIN(PIN_PB5, 4, 2)
+
+#define PIN_PB6				38
+#define PIN_PB6__GPIO			PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__G0_RX3			PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__FLEXCOM10_IO0		PINMUX_PIN(PIN_PB6, 2, 2)
+#define PIN_PB6__RD0			PINMUX_PIN(PIN_PB6, 4, 2)
+
+#define PIN_PB7				39
+#define PIN_PB7__GPIO			PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__G0_TSUCOMP		PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB7, 2, 2)
+#define PIN_PB7__ADTRG			PINMUX_PIN(PIN_PB7, 3, 1)
+#define PIN_PB7__RF0			PINMUX_PIN(PIN_PB7, 4, 2)
+
+#define PIN_PB8				40
+#define PIN_PB8__GPIO			PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__QSPI0_IO3		PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__PCK3			PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__FLEXCOM2_IO1		PINMUX_PIN(PIN_PB8, 4, 2)
+
+#define PIN_PB9				41
+#define PIN_PB9__GPIO			PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__QSPI0_IO2		PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__FLEXCOM2_IO0		PINMUX_PIN(PIN_PB9, 4, 2)
+#define PIN_PB9__PWMEXTRG0		PINMUX_PIN(PIN_PB9, 5, 1)
+
+#define PIN_PB10			42
+#define PIN_PB10__GPIO			PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__QSPI0_IO1		PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__FLEXCOM2_IO4		PINMUX_PIN(PIN_PB10, 4, 2)
+#define PIN_PB10__PWMEXTRG1		PINMUX_PIN(PIN_PB10, 5, 1)
+
+#define PIN_PB11			43
+#define PIN_PB11__GPIO			PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__QSPI0_IO0		PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__FLEXCOM2_IO5		PINMUX_PIN(PIN_PB11, 4, 2)
+#define PIN_PB11__PWML3			PINMUX_PIN(PIN_PB11, 5, 1)
+#define PIN_PB11__TIOB3			PINMUX_PIN(PIN_PB11, 6, 2)
+
+#define PIN_PB12			44
+#define PIN_PB12__GPIO			PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__QSPI0_CS		PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__FLEXCOM2_IO3		PINMUX_PIN(PIN_PB12, 4, 2)
+#define PIN_PB12__PWMFI1		PINMUX_PIN(PIN_PB12, 6, 1)
+#define PIN_PB12__TIOA3			PINMUX_PIN(PIN_PB12, 6, 2)
+
+#define PIN_PB13			45
+#define PIN_PB13__GPIO			PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__QSPI0_SCK		PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__FLEXCOM2_IO2		PINMUX_PIN(PIN_PB13, 4, 2)
+#define PIN_PB13__PWMFI0		PINMUX_PIN(PIN_PB13, 5, 1)
+#define PIN_PB13__TCLK3			PINMUX_PIN(PIN_PB13, 6, 2)
+
+#define PIN_PB14			46
+#define PIN_PB14__GPIO			PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__QSPI0_SCKN		PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__QSPI1_SCK		PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__I2SMCC0_CK		PINMUX_PIN(PIN_PB14, 3, 3)
+#define PIN_PB14__FLEXCOM10_IO5		PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__PWMH3			PINMUX_PIN(PIN_PB14, 5, 1)
+#define PIN_PB14__FLEXCOM2_IO1		PINMUX_PIN(PIN_PB14, 7, 4)
+
+#define PIN_PB15			47
+#define PIN_PB15__GPIO			PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__QSPI0_IO4		PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__QSPI1_IO0		PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__I2SMCC0_WS		PINMUX_PIN(PIN_PB15, 3, 3)
+#define PIN_PB15__FLEXCOM10_IO6		PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__PWML0			PINMUX_PIN(PIN_PB15, 5, 1)
+#define PIN_PB15__TCLK4			PINMUX_PIN(PIN_PB15, 6, 2)
+#define PIN_PB15__FLEXCOM2_IO0		PINMUX_PIN(PIN_PB15, 7, 4)
+
+#define PIN_PB16			48
+#define PIN_PB16__GPIO			PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__QSPI0_IO5		PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__QSPI1_IO1		PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__I2SMCC0_DIN0		PINMUX_PIN(PIN_PB16, 3, 3)
+#define PIN_PB16__FLEXCOM10_IO4		PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__PWMH0			PINMUX_PIN(PIN_PB16, 5, 1)
+#define PIN_PB16__TIOB4			PINMUX_PIN(PIN_PB16, 6, 2)
+
+#define PIN_PB17			49
+#define PIN_PB17__GPIO			PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__QSPI0_IO6		PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__QSPI1_IO2		PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PB17, 3, 3)
+#define PIN_PB17__FLEXCOM10_IO3		PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__PWML1			PINMUX_PIN(PIN_PB17, 5, 1)
+#define PIN_PB17__TIOA4			PINMUX_PIN(PIN_PB17, 6, 2)
+
+#define PIN_PB18			50
+#define PIN_PB18__GPIO			PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__QSPI0_IO7		PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__QSPI1_IO3		PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__I2SMCC0_MCK		PINMUX_PIN(PIN_PB18, 3, 3)
+#define PIN_PB18__FLEXCOM10_IO2		PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__PWMH1			PINMUX_PIN(PIN_PB18, 5, 1)
+#define PIN_PB18__TIOA5			PINMUX_PIN(PIN_PB18, 6, 2)
+
+#define PIN_PB19			51
+#define PIN_PB19__GPIO			PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__QSPI0_DQS		PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__EXT_IRQ1		PINMUX_PIN(PIN_PB19, 2, 2)
+#define PIN_PB19__PCK4			PINMUX_PIN(PIN_PB19, 3, 1)
+#define PIN_PB19__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB19, 4, 1)
+#define PIN_PB19__PWML2			PINMUX_PIN(PIN_PB19, 5, 1)
+#define PIN_PB19__TIOB5			PINMUX_PIN(PIN_PB19, 6, 2)
+
+#define PIN_PB20			52
+#define PIN_PB20__GPIO			PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__QSPI0_INT		PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__QSPI1_CS		PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__FLEXCOM10_IO0		PINMUX_PIN(PIN_PB20, 4, 1)
+#define PIN_PB20__PWMH2			PINMUX_PIN(PIN_PB20, 5, 1)
+#define PIN_PB20__TCLK5			PINMUX_PIN(PIN_PB20, 6, 2)
+
+#define PIN_PB21			53
+#define PIN_PB21__GPIO			PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__SDMMC1_RSTN		PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__FLEXCOM6_IO4		PINMUX_PIN(PIN_PB21, 2, 2)
+#define PIN_PB21__TIOB2			PINMUX_PIN(PIN_PB21, 3, 2)
+#define PIN_PB21__ADTRG			PINMUX_PIN(PIN_PB21, 4, 2)
+#define PIN_PB21__EXT_IRQ0		PINMUX_PIN(PIN_PB21, 5, 2)
+
+#define PIN_PB22			54
+#define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__SDMMC1_CMD		PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__FLEXCOM6_IO3		PINMUX_PIN(PIN_PB22, 2, 2)
+#define PIN_PB22__TCLK2			PINMUX_PIN(PIN_PB22, 3, 2)
+
+#define PIN_PB23			55
+#define PIN_PB23__GPIO			PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__SDMMC1_CK		PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__FLEXCOM6_IO2		PINMUX_PIN(PIN_PB23, 2, 2)
+#define PIN_PB23__TIOA2			PINMUX_PIN(PIN_PB23, 3, 2)
+
+#define PIN_PB24			56
+#define PIN_PB24__GPIO			PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__SDMMC1_DAT0		PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB24, 2, 2)
+
+#define PIN_PB25			57
+#define PIN_PB25__GPIO			PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__SDMMC1_DAT1		PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__FLEXCOM6_IO1		PINMUX_PIN(PIN_PB25, 2, 2)
+#define PIN_PB25__TIOB2			PINMUX_PIN(PIN_PB25, 3, 1)
+
+#define PIN_PB26			58
+#define PIN_PB26__GPIO			PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__SDMMC1_DAT2		PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__FLEXCOM8_IO0		PINMUX_PIN(PIN_PB26, 2, 3)
+#define PIN_PB26__TCLK2			PINMUX_PIN(PIN_PB26, 3, 1)
+
+#define PIN_PB27			59
+#define PIN_PB27__GPIO			PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__SDMMC1_DAT3		PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__FLEXCOM8_IO1		PINMUX_PIN(PIN_PB27, 2, 3)
+#define PIN_PB27__TIOA2			PINMUX_PIN(PIN_PB27, 3, 1)
+
+#define PIN_PB28			60
+#define PIN_PB28__GPIO			PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__SDMMC1_WP		PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__FLEXCOM1_IO0		PINMUX_PIN(PIN_PB28, 3, 3)
+#define PIN_PB28__D15			PINMUX_PIN(PIN_PB28, 5, 1)
+
+#define PIN_PB29			61
+#define PIN_PB29__GPIO			PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__SDMMC1_CD		PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__I2SMCC0_MCK		PINMUX_PIN(PIN_PB29, 2, 1)
+#define PIN_PB29__FLEXCOM1_IO1		PINMUX_PIN(PIN_PB29, 3, 3)
+#define PIN_PB29__D14			PINMUX_PIN(PIN_PB29, 5, 2)
+
+#define PIN_PB30			62
+#define PIN_PB30__GPIO			PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__SDMMC1_1V8SEL		PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__I2SMCC1_MCK		PINMUX_PIN(PIN_PB30, 2, 2)
+#define PIN_PB30__FLEXCOM1_IO2		PINMUX_PIN(PIN_PB30, 3, 3)
+#define PIN_PB30__TIOA1			PINMUX_PIN(PIN_PB30, 4, 1)
+#define PIN_PB30__NCS1			PINMUX_PIN(PIN_PB30, 5, 1)
+
+#define PIN_PB31			63
+#define PIN_PB31__GPIO			PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__PCK7			PINMUX_PIN(PIN_PB31, 1, 2)
+#define PIN_PB31__I2SMCC1_DIN1		PINMUX_PIN(PIN_PB31, 2, 1)
+#define PIN_PB31__FLEXCOM1_IO3		PINMUX_PIN(PIN_PB31, 3, 3)
+#define PIN_PB31__TCLK1			PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__NWE			PINMUX_PIN(PIN_PB31, 5, 2)
+
+#define PIN_PC0				64
+#define PIN_PC0__GPIO			PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__PCK6			PINMUX_PIN(PIN_PC0, 1, 2)
+#define PIN_PC0__I2SMCC1_DIN2		PINMUX_PIN(PIN_PC0, 2, 1)
+#define PIN_PC0__FLEXCOM9_IO4		PINMUX_PIN(PIN_PC0, 3, 2)
+#define PIN_PC0__TIOB1			PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__NWR1			PINMUX_PIN(PIN_PC0, 5, 1)
+
+#define PIN_PC1				65
+#define PIN_PC1__GPIO			PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__PCK5			PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__FLEXCOM9_IO2		PINMUX_PIN(PIN_PC1, 3, 2)
+#define PIN_PC1__SMCK			PINMUX_PIN(PIN_PC1, 5, 1)
+
+#define PIN_PC2				66
+#define PIN_PC2__GPIO			PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__EXT_IRQ0		PINMUX_PIN(PIN_PC2, 1, 3)
+#define PIN_PC2__FLEXCOM9_IO3		PINMUX_PIN(PIN_PC2, 3, 2)
+#define PIN_PC2__A11			PINMUX_PIN(PIN_PC2, 5, 1)
+
+#define PIN_PC3				67
+#define PIN_PC3__GPIO			PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__SPDIF_RX		PINMUX_PIN(PIN_PC3, 1, 2)
+#define PIN_PC3__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC3, 3, 2)
+#define PIN_PC3__FLEXCOM0_IO4		PINMUX_PIN(PIN_PC3, 4, 2)
+#define PIN_PC3__A10			PINMUX_PIN(PIN_PC3, 5, 1)
+
+#define PIN_PC4				68
+#define PIN_PC4__GPIO			PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__SPDIF_TX		PINMUX_PIN(PIN_PC4, 1, 2)
+#define PIN_PC4__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC4, 3, 2)
+#define PIN_PC4__FLEXCOM0_IO3		PINMUX_PIN(PIN_PC4, 4, 2)
+#define PIN_PC4__D0			PINMUX_PIN(PIN_PC4, 5, 2)
+
+#define PIN_PC5				69
+#define PIN_PC5__GPIO			PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__I3CC_SDASPUE		PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__I2SMCC1_DIN3		PINMUX_PIN(PIN_PC5, 2, 1)
+#define PIN_PC5__FLEXCOM0_IO2		PINMUX_PIN(PIN_PC5, 4, 2)
+#define PIN_PC5__D1			PINMUX_PIN(PIN_PC5, 5, 2)
+
+#define PIN_PC6				70
+#define PIN_PC6__GPIO			PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__I3CC_SCL		PINMUX_PIN(PIN_PC6, 1, 1)
+#define PIN_PC6__FLEXCOM0_IO1		PINMUX_PIN(PIN_PC6, 4, 2)
+#define PIN_PC6__D4			PINMUX_PIN(PIN_PC6, 5, 2)
+
+#define PIN_PC7				71
+#define PIN_PC7__GPIO			PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__I3CC_SDA		PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__FLEXCOM0_IO0		PINMUX_PIN(PIN_PC7, 4, 2)
+#define PIN_PC7__D5			PINMUX_PIN(PIN_PC7, 5, 2)
+
+#define PIN_PC8				72
+#define PIN_PC8__GPIO			PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__I2SMCC0_DIN1		PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__PDMC0_DS1		PINMUX_PIN(PIN_PC8, 2, 2)
+#define PIN_PC8__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PC8, 3, 1)
+#define PIN_PC8__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC8, 4, 1)
+#define PIN_PC8__D6			PINMUX_PIN(PIN_PC8, 5, 2)
+
+#define PIN_PC9				73
+#define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__I2SMCC0_DIN2		PINMUX_PIN(PIN_PC9, 1, 1)
+#define PIN_PC9__PDMC0_CLK		PINMUX_PIN(PIN_PC9, 2, 2)
+#define PIN_PC9__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PC9, 3, 1)
+#define PIN_PC9__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC9, 4, 1)
+#define PIN_PC9__D7			PINMUX_PIN(PIN_PC9, 5, 2)
+
+#define PIN_PC10			74
+#define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__I2SMCC0_DIN3		PINMUX_PIN(PIN_PC10, 1, 1)
+#define PIN_PC10__PDMC0_DS0		PINMUX_PIN(PIN_PC10, 2, 2)
+#define PIN_PC10__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PC10, 3, 1)
+#define PIN_PC10__FLEXCOM9_IO2		PINMUX_PIN(PIN_PC10, 4, 1)
+#define PIN_PC10__D2			PINMUX_PIN(PIN_PC10, 5, 2)
+
+#define PIN_PC11			75
+#define PIN_PC11__GPIO			PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PC11, 1, 1)
+#define PIN_PC11__PDMC1_DS0		PINMUX_PIN(PIN_PC11, 2, 1)
+#define PIN_PC11__FLEXCOM9_IO3		PINMUX_PIN(PIN_PC11, 4, 1)
+#define PIN_PC10__D3			PINMUX_PIN(PIN_PC10, 5, 2)
+
+#define PIN_PC12			76
+#define PIN_PC12__GPIO			PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PC12, 1, 1)
+#define PIN_PC12__PDMC1_CLK		PINMUX_PIN(PIN_PC12, 2, 1)
+#define PIN_PC12__FLEXCOM9_IO4		PINMUX_PIN(PIN_PC12, 4, 1)
+#define PIN_PC12__A9			PINMUX_PIN(PIN_PC12, 5, 1)
+
+#define PIN_PC13			77
+#define PIN_PC13__GPIO			PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PC13, 1, 1)
+#define PIN_PC13__PDMC1_DS1		PINMUX_PIN(PIN_PC13, 2, 1)
+#define PIN_PC13__A8			PINMUX_PIN(PIN_PC13, 5, 1)
+
+#define PIN_PC14			78
+#define PIN_PC14__GPIO			PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__I2SMCC1_DIN0		PINMUX_PIN(PIN_PC14, 1, 1)
+#define PIN_PC14__SPDIF_RX		PINMUX_PIN(PIN_PC14, 2, 3)
+#define PIN_PC14__FLEXCOM1_IO0		PINMUX_PIN(PIN_PC14, 3, 2)
+#define PIN_PC14__A7			PINMUX_PIN(PIN_PC14, 5, 1)
+
+#define PIN_PC15			79
+#define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__I2SMCC1_WS		PINMUX_PIN(PIN_PC15, 1, 1)
+#define PIN_PC15__PDMC1_DS1		PINMUX_PIN(PIN_PC15, 2, 2)
+#define PIN_PC15__FLEXCOM1_IO1		PINMUX_PIN(PIN_PC15, 3, 2)
+#define PIN_PC15__A6			PINMUX_PIN(PIN_PC15, 5, 1)
+
+#define PIN_PC16			80
+#define PIN_PC16__GPIO			PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__I2SMCC1_CK		PINMUX_PIN(PIN_PC16, 1, 1)
+#define PIN_PC16__PDMC1_CLK		PINMUX_PIN(PIN_PC16, 2, 2)
+#define PIN_PC16__FLEXCOM1_IO2		PINMUX_PIN(PIN_PC16, 3, 2)
+#define PIN_PC16__TIOA1			PINMUX_PIN(PIN_PC16, 4, 2)
+#define PIN_PC16__A5			PINMUX_PIN(PIN_PC16, 5, 1)
+
+#define PIN_PC17			81
+#define PIN_PC17__GPIO			PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PC17, 1, 1)
+#define PIN_PC17__PDMC1_DS0		PINMUX_PIN(PIN_PC17, 2, 2)
+#define PIN_PC17__FLEXCOM1_IO3		PINMUX_PIN(PIN_PC17, 3, 2)
+#define PIN_PC17__TCLK1			PINMUX_PIN(PIN_PC17, 4, 2)
+#define PIN_PC17__A4			PINMUX_PIN(PIN_PC17, 5, 1)
+
+#define PIN_PC18			82
+#define PIN_PC18__GPIO			PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__I2SMCC0_DIN0		PINMUX_PIN(PIN_PC18, 1, 1)
+#define PIN_PC18__SPDIF_TX		PINMUX_PIN(PIN_PC18, 2, 3)
+#define PIN_PC18__FLEXCOM1_IO4		PINMUX_PIN(PIN_PC18, 3, 2)
+#define PIN_PC18__TIOB1			PINMUX_PIN(PIN_PC18, 4, 2)
+#define PIN_PC18__A3			PINMUX_PIN(PIN_PC18, 5, 1)
+
+#define PIN_PC19			83
+#define PIN_PC19__GPIO			PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__I2SMCC0_WS		PINMUX_PIN(PIN_PC19, 1, 1)
+#define PIN_PC19__PCK6			PINMUX_PIN(PIN_PC19, 2, 1)
+#define PIN_PC19__A2			PINMUX_PIN(PIN_PC19, 5, 1)
+
+#define PIN_PC20			84
+#define PIN_PC20__GPIO			PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PC20, 1, 1)
+#define PIN_PC20__A1			PINMUX_PIN(PIN_PC20, 5, 1)
+
+#define PIN_PC21			85
+#define PIN_PC21__GPIO			PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__I2SMCC0_CK		PINMUX_PIN(PIN_PC21, 1, 1)
+#define PIN_PC21__PCK7			PINMUX_PIN(PIN_PC21, 2, 1)
+#define PIN_PC21__A0			PINMUX_PIN(PIN_PC21, 5, 1)
+
+#define PIN_PC22			86
+#define PIN_PC22__GPIO			PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__NTRST			PINMUX_PIN(PIN_PC22, 1, 1)
+#define PIN_PC22__NWAIT			PINMUX_PIN(PIN_PC22, 5, 1)
+
+#define PIN_PC23			87
+#define PIN_PC23__GPIO			PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__TCK_SWCLK		PINMUX_PIN(PIN_PC23, 1, 1)
+
+#define PIN_PC24			88
+#define PIN_PC24__GPIO			PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__TMS_SWDIO		PINMUX_PIN(PIN_PC24, 1, 1)
+
+#define PIN_PC25			89
+#define PIN_PC25__GPIO			PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__TDI			PINMUX_PIN(PIN_PC25, 1, 1)
+
+#define PIN_PC26			90
+#define PIN_PC26__GPIO			PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__TDO			PINMUX_PIN(PIN_PC26, 1, 1)
+#define PIN_PC26__A15			PINMUX_PIN(PIN_PC26, 5, 1)
+
+#define PIN_PC27			91
+#define PIN_PC27__GPIO			PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__SDMMC2_CMD		PINMUX_PIN(PIN_PC27, 1, 1)
+#define PIN_PC27__FLEXCOM8_IO0		PINMUX_PIN(PIN_PC27, 2, 2)
+#define PIN_PC27__TD1			PINMUX_PIN(PIN_PC27, 4, 2)
+#define PIN_PC27__D8			PINMUX_PIN(PIN_PC27, 5, 1)
+
+#define PIN_PC28			92
+#define PIN_PC28__GPIO			PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__SDMMC2_CK		PINMUX_PIN(PIN_PC28, 1, 1)
+#define PIN_PC28__FLEXCOM8_IO1		PINMUX_PIN(PIN_PC28, 2, 2)
+#define PIN_PC28__TF1			PINMUX_PIN(PIN_PC28, 4, 2)
+#define PIN_PC28__D9			PINMUX_PIN(PIN_PC28, 5, 1)
+
+#define PIN_PC29			93
+#define PIN_PC29__GPIO			PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__SDMMC2_DAT0		PINMUX_PIN(PIN_PC29, 1, 1)
+#define PIN_PC29__FLEXCOM8_IO2		PINMUX_PIN(PIN_PC29, 2, 2)
+#define PIN_PC29__TK1			PINMUX_PIN(PIN_PC29, 4, 2)
+#define PIN_PC29__D10			PINMUX_PIN(PIN_PC29, 5, 1)
+#define PIN_PC29__TCLK0			PINMUX_PIN(PIN_PC29, 6, 1)
+
+#define PIN_PC30			94
+#define PIN_PC30__GPIO			PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__SDMMC2_DAT1		PINMUX_PIN(PIN_PC30, 1, 1)
+#define PIN_PC30__FLEXCOM8_IO3		PINMUX_PIN(PIN_PC30, 2, 2)
+#define PIN_PC30__RD1			PINMUX_PIN(PIN_PC30, 4, 2)
+#define PIN_PC30__D11			PINMUX_PIN(PIN_PC30, 5, 1)
+#define PIN_PC30__TIOA0			PINMUX_PIN(PIN_PC30, 6, 1)
+
+#define PIN_PC31			95
+#define PIN_PC31__GPIO			PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__SDMMC2_DAT2		PINMUX_PIN(PIN_PC31, 1, 1)
+#define PIN_PC31__FLEXCOM8_IO4		PINMUX_PIN(PIN_PC31, 2, 2)
+#define PIN_PC31__PCK0			PINMUX_PIN(PIN_PC31, 3, 2)
+#define PIN_PC31__RK1			PINMUX_PIN(PIN_PC31, 4, 2)
+#define PIN_PC31__D12			PINMUX_PIN(PIN_PC31, 5, 1)
+#define PIN_PC31__TIOB0			PINMUX_PIN(PIN_PC31, 6, 1)
+
+#define PIN_PD0				96
+#define PIN_PD0__GPIO			PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__SDMMC2_DAT3		PINMUX_PIN(PIN_PD0, 1, 1)
+#define PIN_PD0__PCK1			PINMUX_PIN(PIN_PD0, 3, 2)
+#define PIN_PD0__RF1			PINMUX_PIN(PIN_PD0, 4, 2)
+#define PIN_PD0__D13			PINMUX_PIN(PIN_PD0, 5, 1)
+
+#define PIN_PD1				97
+#define PIN_PD1__GPIO			PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__SDMMC2_WP		PINMUX_PIN(PIN_PD1, 1, 1)
+#define PIN_PD1__FLEXCOM1_IO5		PINMUX_PIN(PIN_PD1, 2, 1)
+#define PIN_PD1__LCDC_HSYNC		PINMUX_PIN(PIN_PD1, 3, 2)
+#define PIN_PD1__FLEXCOM3_IO0		PINMUX_PIN(PIN_PD1, 4, 3)
+
+#define PIN_PD2				98
+#define PIN_PD2__GPIO			PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__SDMMC2_CD		PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__FLEXCOM1_IO6		PINMUX_PIN(PIN_PD2, 2, 1)
+#define PIN_PD2__LCDC_VSYNC		PINMUX_PIN(PIN_PD2, 3, 2)
+#define PIN_PD2__FLEXCOM3_IO1		PINMUX_PIN(PIN_PD2, 4, 3)
+
+#define PIN_PD3				99
+#define PIN_PD3__GPIO			PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__SDMMC2_1V8SEL		PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FLEXCOM1_IO4		PINMUX_PIN(PIN_PD3, 2, 1)
+#define PIN_PD3__TIOA0			PINMUX_PIN(PIN_PD3, 3, 2)
+#define PIN_PD3__FLEXCOM3_IO2		PINMUX_PIN(PIN_PD3, 4, 3)
+#define PIN_PD3__EXT_IRQ1		PINMUX_PIN(PIN_PD3, 5, 3)
+
+#define PIN_PD4				100
+#define PIN_PD4__GPIO			PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__LCDC_HSYNC		PINMUX_PIN(PIN_PD4, 1, 1)
+#define PIN_PD4__FLEXCOM1_IO2		PINMUX_PIN(PIN_PD4, 2, 1)
+#define PIN_PD4__TIOB0			PINMUX_PIN(PIN_PD4, 3, 2)
+#define PIN_PD4__FLEXCOM7_IO1		PINMUX_PIN(PIN_PD4, 4, 3)
+
+#define PIN_PD5				101
+#define PIN_PD5__GPIO			PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__LCDC_VSYNC		PINMUX_PIN(PIN_PD5, 1, 1)
+#define PIN_PD5__FLEXCOM1_IO3		PINMUX_PIN(PIN_PD5, 2, 1)
+#define PIN_PD5__TCLK0			PINMUX_PIN(PIN_PD5, 3, 2)
+#define PIN_PD5__FLEXCOM7_IO0		PINMUX_PIN(PIN_PD5, 4, 3)
+
+#define PIN_PD6				102
+#define PIN_PD6__GPIO			PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__LCDC_PWM		PINMUX_PIN(PIN_PD6, 1, 1)
+#define PIN_PD6__FLEXCOM1_IO1		PINMUX_PIN(PIN_PD6, 2, 1)
+#define PIN_PD6__FLEXCOM7_IO2		PINMUX_PIN(PIN_PD6, 4, 3)
+
+#define PIN_PD7				103
+#define PIN_PD7__GPIO			PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__LCDC_DISP		PINMUX_PIN(PIN_PD7, 1, 1)
+#define PIN_PD7__FLEXCOM1_IO0		PINMUX_PIN(PIN_PD7, 2, 1)
+#define PIN_PD7__FLEXCOM7_IO3		PINMUX_PIN(PIN_PD7, 4, 3)
+
+#define PIN_PD8				104
+#define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__CANTX0			PINMUX_PIN(PIN_PD8, 1, 1)
+#define PIN_PD8__FLEXCOM7_IO0		PINMUX_PIN(PIN_PD8, 2, 1)
+
+#define PIN_PD9				105
+#define PIN_PD9__GPIO			PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__CANRX0			PINMUX_PIN(PIN_PD9, 1, 1)
+#define PIN_PD9__FLEXCOM7_IO1		PINMUX_PIN(PIN_PD9, 2, 1)
+
+#define PIN_PD10			106
+#define PIN_PD10__GPIO			PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__CANTX1		PINMUX_PIN(PIN_PD10, 1, 1)
+#define PIN_PD10__FLEXCOM7_IO2		PINMUX_PIN(PIN_PD10, 2, 1)
+#define PIN_PD10__TIOA1			PINMUX_PIN(PIN_PD10, 3, 3)
+
+#define PIN_PD11			107
+#define PIN_PD11__GPIO			PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__CANRX1		PINMUX_PIN(PIN_PD11, 1, 1)
+#define PIN_PD11__FLEXCOM7_IO3		PINMUX_PIN(PIN_PD11, 2, 1)
+#define PIN_PD11__TCLK1			PINMUX_PIN(PIN_PD11, 3, 3)
+
+#define PIN_PD12			108
+#define PIN_PD12__GPIO			PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__CANTX2		PINMUX_PIN(PIN_PD12, 1, 1)
+#define PIN_PD12__FLEXCOM7_IO4		PINMUX_PIN(PIN_PD12, 2, 1)
+#define PIN_PD12__TIOB1			PINMUX_PIN(PIN_PD12, 3, 3)
+#define PIN_PD12__PCK2			PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__FLEXCOM3_IO3		PINMUX_PIN(PIN_PD12, 5, 3)
+
+#define PIN_PD13			109
+#define PIN_PD13__GPIO			PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__CANRX2		PINMUX_PIN(PIN_PD13, 1, 1)
+#define PIN_PD13__FLEXCOM5_IO4		PINMUX_PIN(PIN_PD13, 2, 1)
+#define PIN_PD13__TIOA2			PINMUX_PIN(PIN_PD13, 3, 3)
+#define PIN_PD13__PCK3			PINMUX_PIN(PIN_PD13, 4, 2)
+
+#define PIN_PD14			110
+#define PIN_PD14__GPIO			PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__CANTX3		PINMUX_PIN(PIN_PD14, 1, 1)
+#define PIN_PD14__FLEXCOM5_IO2		PINMUX_PIN(PIN_PD14, 2, 1)
+#define PIN_PD14__TIOB2			PINMUX_PIN(PIN_PD14, 3, 3)
+
+#define PIN_PD15			111
+#define PIN_PD15__GPIO			PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__CANRX3		PINMUX_PIN(PIN_PD15, 1, 1)
+#define PIN_PD15__FLEXCOM5_IO3		PINMUX_PIN(PIN_PD15, 2, 1)
+#define PIN_PD15__TCLK2			PINMUX_PIN(PIN_PD15, 3, 3)
+
+#define PIN_PD16			112
+#define PIN_PD16__GPIO			PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__CANTX4		PINMUX_PIN(PIN_PD16, 1, 1)
+#define PIN_PD16__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD16, 2, 1)
+
+#define PIN_PD17			113
+#define PIN_PD17__GPIO			PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__CANRX4		PINMUX_PIN(PIN_PD17, 1, 1)
+#define PIN_PD17__FLEXCOM5_IO1		PINMUX_PIN(PIN_PD17, 2, 1)
+
+#define PIN_PD18			114
+#define PIN_PD18__GPIO			PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__FLEXCOM6_IO0		PINMUX_PIN(PIN_PD18, 2, 4)
+#define PIN_PD18__CANTX1		PINMUX_PIN(PIN_PD18, 3, 2)
+#define PIN_PD18__PCK4			PINMUX_PIN(PIN_PD18, 4, 2)
+
+#define PIN_PD19			115
+#define PIN_PD19__GPIO			PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__FLEXCOM6_IO1		PINMUX_PIN(PIN_PD19, 2, 4)
+#define PIN_PD19__CANRX1		PINMUX_PIN(PIN_PD19, 3, 2)
+#define PIN_PD19__PCK2			PINMUX_PIN(PIN_PD19, 4, 3)
+
+#define PIN_PD20			116
+#define PIN_PD20__GPIO			PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__PFLEXCOM6_IO2		PINMUX_PIN(PIN_PD20, 2, 4)
+#define PIN_PD20__I2SMCC1_MCK		PINMUX_PIN(PIN_PD20, 3, 2)
+#define PIN_PD20__PCK3			PINMUX_PIN(PIN_PD20, 4, 3)
+
+#define PIN_PD21			117
+#define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__G1_TXCTL		PINMUX_PIN(PIN_PD21, 1, 2)
+#define PIN_PD21__FLEXCOM6_IO2		PINMUX_PIN(PIN_PD21, 2, 3)
+#define PIN_PD21__TK1			PINMUX_PIN(PIN_PD21, 3, 1)
+
+#define PIN_PD22			118
+#define PIN_PD22__GPIO			PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__G1_TX0		PINMUX_PIN(PIN_PD22, 1, 1)
+#define PIN_PD22__FLEXCOM6_IO3		PINMUX_PIN(PIN_PD22, 2, 3)
+#define PIN_PD22__TF1			PINMUX_PIN(PIN_PD22, 3, 1)
+
+#define PIN_PD23			119
+#define PIN_PD23__GPIO			PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__G1_TX1		PINMUX_PIN(PIN_PD23, 1, 1)
+#define PIN_PD23__FLEXCOM6_IO4		PINMUX_PIN(PIN_PD23, 2, 3)
+#define PIN_PD23__TD1			PINMUX_PIN(PIN_PD23, 3, 1)
+
+#define PIN_PD24			120
+#define PIN_PD24__GPIO			PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__G1_RXCTL		PINMUX_PIN(PIN_PD24, 1, 1)
+#define PIN_PD24__FLEXCOM6_IO0		PINMUX_PIN(PIN_PD24, 2, 3)
+#define PIN_PD24__RD1			PINMUX_PIN(PIN_PD24, 3, 1)
+#define PIN_PD24__PDMC0_DS1		PINMUX_PIN(PIN_PD24, 5, 3)
+
+#define PIN_PD25			121
+#define PIN_PD25__GPIO			PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__G1_MDC		PINMUX_PIN(PIN_PD25, 1, 1)
+#define PIN_PD25__FLEXCOM6_IO1		PINMUX_PIN(PIN_PD25, 2, 3)
+#define PIN_PD25__RK1			PINMUX_PIN(PIN_PD25, 3, 1)
+#define PIN_PD25__PDMC0_CLK		PINMUX_PIN(PIN_PD25, 5, 3)
+
+#define PIN_PD26			122
+#define PIN_PD26__GPIO			PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__G1_MDIO		PINMUX_PIN(PIN_PD26, 1, 1)
+#define PIN_PD26__FLEXCOM7_IO4		PINMUX_PIN(PIN_PD26, 2, 2)
+#define PIN_PD26__RF1			PINMUX_PIN(PIN_PD26, 3, 1)
+#define PIN_PD26__I2SMCC1_DIN2		PINMUX_PIN(PIN_PD26, 4, 2)
+#define PIN_PD26__PDMC0_DS0		PINMUX_PIN(PIN_PD26, 5, 3)
+
+#define PIN_PD27			123
+#define PIN_PD27__GPIO			PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__G1_RX0		PINMUX_PIN(PIN_PD27, 1, 1)
+#define PIN_PD27__FLEXCOM7_IO0		PINMUX_PIN(PIN_PD27, 2, 2)
+#define PIN_PD27__SPDIF_RX		PINMUX_PIN(PIN_PD27, 3, 1)
+#define PIN_PD27__I2SMCC1_DIN3		PINMUX_PIN(PIN_PD27, 4, 2)
+
+#define PIN_PD28			124
+#define PIN_PD28__GPIO			PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__G1_RX1		PINMUX_PIN(PIN_PD28, 1, 1)
+#define PIN_PD28__FLEXCOM7_IO1		PINMUX_PIN(PIN_PD28, 2, 2)
+#define PIN_PD28__SPDIF_TX		PINMUX_PIN(PIN_PD28, 3, 1)
+#define PIN_PD28__I2SMCC1_DIN1		PINMUX_PIN(PIN_PD28, 4, 2)
+
+#define PIN_PD29			125
+#define PIN_PD29__GPIO			PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__G1_REFCK		PINMUX_PIN(PIN_PD29, 1, 2)
+#define PIN_PD29__FLEXCOM7_IO2		PINMUX_PIN(PIN_PD29, 2, 2)
+#define PIN_PD29__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PD29, 3, 2)
+
+#define PIN_PD30			126
+#define PIN_PD30__GPIO			PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__G1_RX2		PINMUX_PIN(PIN_PD30, 1, 1)
+#define PIN_PD30__FLEXCOM7_IO3		PINMUX_PIN(PIN_PD30, 2, 2)
+#define PIN_PD30__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PD30, 3, 2)
+#define PIN_PD30__PDMC1_DS1		PINMUX_PIN(PIN_PD30, 4, 3)
+#define PIN_PD30__G1_RXER		PINMUX_PIN(PIN_PD30, 5, 2)
+
+#define PIN_PD31			127
+#define PIN_PD31__GPIO			PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__G1_RX3		PINMUX_PIN(PIN_PD31, 1, 1)
+#define PIN_PD31__FLEXCOM5_IO4		PINMUX_PIN(PIN_PD31, 2, 2)
+#define PIN_PD31__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PD31, 3, 3)
+#define PIN_PD31__PDMC1_DS0		PINMUX_PIN(PIN_PD31, 4, 3)
+
+#define PIN_PE0				128
+#define PIN_PE0__GPIO			PINMUX_PIN(PIN_PE0, 0, 0)
+#define PIN_PE0__G1_TX2			PINMUX_PIN(PIN_PE0, 1, 1)
+#define PIN_PE0__FLEXCOM5_IO2		PINMUX_PIN(PIN_PE0, 2, 2)
+#define PIN_PE0__I2SMCC1_DIN0		PINMUX_PIN(PIN_PE0, 3, 2)
+#define PIN_PE0__PDMC1_CLK		PINMUX_PIN(PIN_PE0, 4, 3)
+
+#define PIN_PE1				129
+#define PIN_PE1__GPIO			PINMUX_PIN(PIN_PE1, 0, 0)
+#define PIN_PE1__G1_TX3			PINMUX_PIN(PIN_PE1, 1, 1)
+#define PIN_PE1__FLEXCOM5_IO3		PINMUX_PIN(PIN_PE1, 2, 2)
+#define PIN_PE1__I2SMCC1_WS		PINMUX_PIN(PIN_PE1, 3, 2)
+#define PIN_PE1__PDMC0_DS1		PINMUX_PIN(PIN_PE1, 4, 4)
+
+#define PIN_PE2				130
+#define PIN_PE2__GPIO			PINMUX_PIN(PIN_PE2, 0, 0)
+#define PIN_PE2__G1_RXCK		PINMUX_PIN(PIN_PE2, 1, 1)
+#define PIN_PE2__FLEXCOM5_IO1		PINMUX_PIN(PIN_PE2, 2, 2)
+#define PIN_PE2__I2SMCC1_CK		PINMUX_PIN(PIN_PE2, 3, 2)
+#define PIN_PE2__PDMC0_CLK		PINMUX_PIN(PIN_PE2, 4, 4)
+
+#define PIN_PE3				131
+#define PIN_PE3__GPIO			PINMUX_PIN(PIN_PE3, 0, 0)
+#define PIN_PE3__G1_TSUCOMP		PINMUX_PIN(PIN_PE3, 1, 1)
+#define PIN_PE3__FLEXCOM5_IO0		PINMUX_PIN(PIN_PE3, 2, 2)
+#define PIN_PE3__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PE3, 3, 2)
+#define PIN_PE3__PDMC0_DS0		PINMUX_PIN(PIN_PE3, 4, 4)
+
+#define PIN_PE4				132
+#define PIN_PE4__GPIO			PINMUX_PIN(PIN_PE4, 0, 0)
+#define PIN_PE4__LCDC_DAT0		PINMUX_PIN(PIN_PE4, 1, 1)
+#define PIN_PE4__FLEXCOM2_IO2		PINMUX_PIN(PIN_PE4, 2, 1)
+#define PIN_PE4__PWML0			PINMUX_PIN(PIN_PE4, 3, 2)
+#define PIN_PE4__TIOA3			PINMUX_PIN(PIN_PE4, 4, 1)
+#define PIN_PE4__I2SMCC0_DIN1		PINMUX_PIN(PIN_PE4, 5, 2)
+
+#define PIN_PE5				133
+#define PIN_PE5__GPIO			PINMUX_PIN(PIN_PE5, 0, 0)
+#define PIN_PE5__LCDC_DAT1		PINMUX_PIN(PIN_PE5, 1, 1)
+#define PIN_PE5__FLEXCOM2_IO3		PINMUX_PIN(PIN_PE5, 2, 1)
+#define PIN_PE5__PWMH0			PINMUX_PIN(PIN_PE5, 3, 2)
+#define PIN_PE5__TIOB3			PINMUX_PIN(PIN_PE5, 4, 1)
+#define PIN_PE5__I2SMCC0_DIN2		PINMUX_PIN(PIN_PE5, 5, 2)
+
+#define PIN_PE6				134
+#define PIN_PE6__GPIO			PINMUX_PIN(PIN_PE6, 0, 0)
+#define PIN_PE6__LCDC_DAT2		PINMUX_PIN(PIN_PE6, 1, 1)
+#define PIN_PE6__FLEXCOM2_IO4		PINMUX_PIN(PIN_PE6, 2, 1)
+#define PIN_PE6__PWML1			PINMUX_PIN(PIN_PE6, 3, 2)
+#define PIN_PE6__TCLK3			PINMUX_PIN(PIN_PE6, 4, 1)
+#define PIN_PE6__I2SMCC0_DIN3		PINMUX_PIN(PIN_PE6, 5, 2)
+
+#define PIN_PE7				135
+#define PIN_PE7__GPIO			PINMUX_PIN(PIN_PE7, 0, 0)
+#define PIN_PE7__LCDC_DAT3		PINMUX_PIN(PIN_PE7, 1, 1)
+#define PIN_PE7__FLEXCOM2_IO5		PINMUX_PIN(PIN_PE7, 2, 1)
+#define PIN_PE7__PWMH1			PINMUX_PIN(PIN_PE7, 3, 2)
+#define PIN_PE7__TIOA4			PINMUX_PIN(PIN_PE7, 4, 1)
+#define PIN_PE7__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PE7, 5, 2)
+
+#define PIN_PE8				136
+#define PIN_PE8__GPIO			PINMUX_PIN(PIN_PE8, 0, 0)
+#define PIN_PE8__LCDC_DAT4		PINMUX_PIN(PIN_PE8, 1, 1)
+#define PIN_PE8__FLEXCOM2_IO0		PINMUX_PIN(PIN_PE8, 2, 1)
+#define PIN_PE8__PWML2			PINMUX_PIN(PIN_PE8, 3, 2)
+#define PIN_PE8__TIOB4			PINMUX_PIN(PIN_PE8, 4, 1)
+#define PIN_PE8__I2SMCC0_CK		PINMUX_PIN(PIN_PE8, 5, 2)
+
+#define PIN_PE9				137
+#define PIN_PE9__GPIO			PINMUX_PIN(PIN_PE9, 0, 0)
+#define PIN_PE9__LCDC_DAT5		PINMUX_PIN(PIN_PE9, 1, 1)
+#define PIN_PE9__FLEXCOM2_IO1		PINMUX_PIN(PIN_PE9, 2, 1)
+#define PIN_PE9__PWMH2			PINMUX_PIN(PIN_PE9, 3, 2)
+#define PIN_PE9__TCLK4			PINMUX_PIN(PIN_PE9, 4, 1)
+#define PIN_PE9__I2SMCC0_WS		PINMUX_PIN(PIN_PE9, 5, 2)
+
+#define PIN_PE10			138
+#define PIN_PE10__GPIO			PINMUX_PIN(PIN_PE10, 0, 0)
+#define PIN_PE10__LCDC_DAT6		PINMUX_PIN(PIN_PE10, 1, 1)
+#define PIN_PE10__FLEXCOM2_IO6		PINMUX_PIN(PIN_PE10, 2, 1)
+#define PIN_PE10__PWML3			PINMUX_PIN(PIN_PE10, 3, 2)
+#define PIN_PE10__TIOA5			PINMUX_PIN(PIN_PE10, 4, 1)
+#define PIN_PE10__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PE10, 5, 2)
+
+#define PIN_PE11			139
+#define PIN_PE11__GPIO			PINMUX_PIN(PIN_PE11, 0, 0)
+#define PIN_PE11__LCDC_DAT7		PINMUX_PIN(PIN_PE11, 1, 1)
+#define PIN_PE11__PWMH3			PINMUX_PIN(PIN_PE11, 3, 2)
+#define PIN_PE11__TIOB5			PINMUX_PIN(PIN_PE11, 4, 1)
+#define PIN_PE11__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PE11, 5, 2)
+
+#define PIN_PE12			140
+#define PIN_PE12__GPIO			PINMUX_PIN(PIN_PE12, 0, 0)
+#define PIN_PE12__LCDC_DEN		PINMUX_PIN(PIN_PE12, 1, 1)
+#define PIN_PE12__PCK3			PINMUX_PIN(PIN_PE12, 2, 4)
+#define PIN_PE12__PWMEXTRG0		PINMUX_PIN(PIN_PE12, 3, 2)
+#define PIN_PE12__TCLK5			PINMUX_PIN(PIN_PE12, 4, 1)
+#define PIN_PE12__I2SMCC0_DIN0		PINMUX_PIN(PIN_PE12, 5, 2)
+
+#define PIN_PE13			141
+#define PIN_PE13__GPIO			PINMUX_PIN(PIN_PE13, 0, 0)
+#define PIN_PE13__LCDC_PCK		PINMUX_PIN(PIN_PE13, 1, 1)
+#define PIN_PE13__PCK4			PINMUX_PIN(PIN_PE13, 2, 3)
+#define PIN_PE13__PWMEXTRG1		PINMUX_PIN(PIN_PE13, 3, 2)
+#define PIN_PE13__I2SMCC0DOUT0		PINMUX_PIN(PIN_PE13, 5, 2)
diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi
new file mode 100644
index 000000000000..e53e2dd6d530
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi
@@ -0,0 +1,740 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  sama7d65.dtsi - Device Tree Include file for SAMA7D65 SoC
+ *
+ *  Copyright (C) 2024 Microchip Technology Inc. and its subsidiaries
+ *
+ *  Author: Ryan Wanner <Ryan.Wanner@microchip.com>
+ *
+ */
+
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	model = "Microchip SAMA7D65 family SoC";
+	compatible = "microchip,sama7d65";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			device_type = "cpu";
+			clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
+			clock-names = "cpu";
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
+			next-level-cache = <&L2>;
+
+			L2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x40000>; // L2, 256 KB
+				cache-unified;
+			};
+		};
+	};
+
+	clocks {
+		main_xtal: clock-mainxtal {
+			compatible = "fixed-clock";
+			clock-output-names = "main_xtal";
+			#clock-cells = <0>;
+		};
+
+		slow_xtal: clock-slowxtal {
+			compatible = "fixed-clock";
+			clock-output-names = "slow_xtal";
+			#clock-cells = <0>;
+		};
+	};
+
+	ns_sram: sram@100000 {
+		compatible = "mmio-sram";
+		reg = <0x100000 0x20000>;
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		securam: sram@e0000800 {
+			compatible = "microchip,sama7d65-securam", "atmel,sama5d2-securam", "mmio-sram";
+			reg = <0xe0000800 0x4000>;
+			ranges = <0 0xe0000800 0x4000>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			no-memory-wc;
+		};
+
+		secumod: security-module@e0004000 {
+			compatible = "microchip,sama7d65-secumod", "atmel,sama5d2-secumod", "syscon";
+			reg = <0xe0004000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		sfrbu: sfr@e0008000 {
+			compatible = "microchip,sama7d65-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
+			reg = <0xe0008000 0x20>;
+		};
+
+		pioa: pinctrl@e0014000 {
+			compatible = "microchip,sama7d65-pinctrl", "microchip,sama7g5-pinctrl";
+			reg = <0xe0014000 0x800>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		pmc: clock-controller@e0018000 {
+			compatible = "microchip,sama7d65-pmc", "syscon";
+			reg = <0xe0018000 0x200>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#clock-cells = <2>;
+			clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+			clock-names = "td_slck", "md_slck", "main_xtal";
+		};
+
+		ps_wdt: watchdog@e001d000 {
+			compatible = "microchip,sama7d65-wdt", "microchip,sama7g5-wdt";
+			reg = <0xe001d000 0x30>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		reset_controller: reset-controller@e001d100 {
+			compatible = "microchip,sama7d65-rstc", "microchip,sama7g5-rstc";
+			reg = <0xe001d100 0xc>, <0xe001d1e4 0x4>;
+			#reset-cells = <1>;
+			clocks = <&clk32k 0>;
+		};
+
+		shdwc: poweroff@e001d200 {
+			compatible = "microchip,sama7d65-shdwc", "microchip,sama7g5-shdwc", "syscon";
+			reg = <0xe001d200 0x20>;
+			clocks = <&clk32k 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			atmel,wakeup-rtc-timer;
+			atmel,wakeup-rtt-timer;
+			status = "disabled";
+		};
+
+		rtt: rtc@e001d300 {
+			compatible = "microchip,sama7d65-rtt", "atmel,at91sam9260-rtt";
+			reg = <0xe001d300 0x30>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		clk32k: clock-controller@e001d500 {
+			compatible = "microchip,sama7d65-sckc", "microchip,sam9x60-sckc";
+			reg = <0xe001d500 0x4>;
+			clocks = <&slow_xtal>;
+			#clock-cells = <1>;
+		};
+
+		gpbr: syscon@e001d700 {
+			compatible = "microchip,sama7d65-gpbr", "syscon";
+			reg = <0xe001d700 0x48>;
+		};
+
+		rtc: rtc@e001d800 {
+			compatible = "microchip,sama7d65-rtc", "microchip,sam9x60-rtc";
+			reg = <0xe001d800 0x30>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 1>;
+		};
+
+		chipid@e0020000 {
+			compatible = "microchip,sama7d65-chipid";
+			reg = <0xe0020000 0x8>;
+		};
+
+		can0: can@e0828000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0828000 0x200>, <0x100000 0x7800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 58>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@e082c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe082c000 0x200>, <0x100000 0xbc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 59>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can2: can@e0830000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0830000 0x200>, <0x100000 0x10000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 60>, <&pmc PMC_TYPE_GCK 60>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 60>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can3: can@e0834000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0834000 0x200>, <0x110000 0x4400>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 61>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can4: can@e0838000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0838000 0x200>, <0x110000 0x8800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 62>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		dma2: dma-controller@e1200000 {
+			compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma";
+			reg = <0xe1200000 0x1000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "dma_clk";
+			dma-requests = <0>;
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@e1208000 {
+			compatible = "microchip,sama7d65-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe1208000 0x400>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 76>, <&pmc PMC_TYPE_GCK 76>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 76>;
+			assigned-clock-rates = <200000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK1>;
+			status = "disabled";
+		};
+
+		aes: crypto@e1600000 {
+			compatible = "microchip,sama7d65-aes", "atmel,at91sam9g46-aes";
+			reg = <0xe1600000 0x100>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+			clock-names = "aes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+			dma-names = "tx", "rx";
+		};
+
+		sha: crypto@e1604000 {
+			compatible = "microchip,sama7d65-sha", "atmel,at91sam9g46-sha";
+			reg = <0xe1604000 0x100>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 78>;
+			clock-names = "sha_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+			dma-names = "tx";
+		};
+
+		tdes: crypto@e1608000 {
+			compatible = "microchip,sama7d65-tdes", "atmel,at91sam9g46-tdes";
+			reg = <0xe1608000 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 91>;
+			clock-names = "tdes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(53)>;
+			dma-names = "tx", "rx";
+		};
+
+		trng: rng@e160c000 {
+			compatible = "microchip,sama7d65-trng", "microchip,sam9x60-trng";
+			reg = <0xe160c000 0x100>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 92>;
+		};
+
+		dma0: dma-controller@e1610000 {
+			compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma";
+			reg = <0xe1610000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		dma1: dma-controller@e1614000 {
+			compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma";
+			reg = <0xe1614000 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		gmac0: ethernet@e1618000 {
+			compatible = "microchip,sama7d65-gem", "microchip,sama7g5-gem";
+			reg = <0xe1618000 0x2000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_GCK 46>, <&pmc PMC_TYPE_GCK 49>;
+			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 46>, <&pmc PMC_TYPE_GCK 49>;
+			assigned-clock-rates = <125000000>, <200000000>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@e161c000 {
+			compatible = "microchip,sama7d65-gem", "microchip,sama7g5-gem";
+			reg = <0xe161c000 0x2000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_PERIPHERAL 47>,<&pmc PMC_TYPE_GCK 47>, <&pmc PMC_TYPE_GCK 50>;
+			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 47>, <&pmc PMC_TYPE_GCK 50>;
+			assigned-clock-rates = <125000000>, <200000000>;
+			status = "disabled";
+		};
+
+		pit64b0: timer@e1800000 {
+			compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1800000 0x100>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
+			clock-names = "pclk", "gclk";
+		};
+
+		pit64b1: timer@e1804000 {
+			compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1804000 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 67>, <&pmc PMC_TYPE_GCK 67>;
+			clock-names = "pclk", "gclk";
+		};
+
+		pwm: pwm@e1818000 {
+			compatible = "microchip,sama7d65-pwm", "atmel,sama5d2-pwm";
+			reg = <0xe1818000 0x500>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 72>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		flx0: flexcom@e1820000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1820000 0x200>;
+			ranges = <0x0 0xe1820000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart0: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(5)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(6)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(5)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@e1824000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1824000 0x200>;
+			ranges = <0x0 0xe1824000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			spi1: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(7)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(7)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx2: flexcom@e1828000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1828000 0x200>;
+			ranges = <0x0 0xe1828000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart2: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(10)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(9)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@e182c000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe182c000 0x200>;
+			ranges = <0x0 0xe182c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart3: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				clock-names = "usart";
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(11)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(11)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+		};
+
+		flx4: flexcom@e2018000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2018000 0x200>;
+			ranges = <0x0 0xe2018000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart4: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(13)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi4: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(13)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx5: flexcom@e201c000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe201c000 0x200>;
+			ranges = <0x0 0xe201c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c5: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(16)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(15)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx6: flexcom@e2020000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2020000 0x200>;
+			ranges = <0x0 0xe2020000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+			status = "disabled";
+
+			uart6: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "usart";
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx7: flexcom@e2024000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2024000 0x200>;
+			ranges = <0x0 0xe2024000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart7: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(19)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+		};
+
+		flx8: flexcom@e281c000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe281c000 0x200>;
+			ranges = <0x0 0xe281c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c8: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(21)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx9: flexcom@e2820000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2820000 0x200>;
+			ranges = <0x0 0xe281c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c9: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(23)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx10: flexcom@e2824000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2824000 0x200>;
+			ranges = <0x0 0xe2824000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c10: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		uddrc: uddrc@e3800000 {
+			compatible = "microchip,sama7d65-uddrc", "microchip,sama7g5-uddrc";
+			reg = <0xe3800000 0x4000>;
+		};
+
+		ddr3phy: ddr3phy@e3804000 {
+			compatible = "microchip,sama7d65-ddr3phy", "microchip,sama7g5-ddr3phy";
+			reg = <0xe3804000 0x1000>;
+		};
+
+		gic: interrupt-controller@e8c11000 {
+			compatible = "arm,cortex-a7-gic";
+			reg = <0xe8c11000 0x1000>,
+			      <0xe8c12000 0x2000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama7g5-pinfunc.h b/arch/arm/boot/dts/microchip/sama7g5-pinfunc.h
index 4eb30445d205..a67a156e26ab 100644
--- a/arch/arm/boot/dts/sama7g5-pinfunc.h
+++ b/arch/arm/boot/dts/microchip/sama7g5-pinfunc.h
@@ -261,7 +261,7 @@
 #define PIN_PB2__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB2, 2, 1)
 #define PIN_PB2__ADTRG			PINMUX_PIN(PIN_PB2, 3, 1)
 #define PIN_PB2__A20			PINMUX_PIN(PIN_PB2, 4, 1)
-#define PIN_PB2__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB2, 6, 3)
+#define PIN_PB2__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB2, 6, 3)
 #define PIN_PB3				35
 #define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
 #define PIN_PB3__RF1			PINMUX_PIN(PIN_PB3, 1, 1)
@@ -673,7 +673,7 @@
 #define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
 #define PIN_PD8__SDMMC2_DAT3		PINMUX_PIN(PIN_PD8, 1, 1)
 #define PIN_PD8__I2SMCC0_DIN0		PINMUX_PIN(PIN_PD8, 3, 1)
-#define PIN_PD8__A11_NANDCLE		PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__A22_NANDCLE		PINMUX_PIN(PIN_PD8, 4, 2)
 #define PIN_PD8__TIOA2			PINMUX_PIN(PIN_PD8, 5, 2)
 #define PIN_PD8__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD8, 6, 5)
 #define PIN_PD9				105
diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
index bb6d71e6dfeb..381cbcfcb34a 100644
--- a/arch/arm/boot/dts/sama7g5.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
@@ -9,11 +9,15 @@
  *
  */
 
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/at91.h>
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	model = "Microchip SAMA7G5 family SoC";
@@ -33,6 +37,17 @@
 			clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
+			next-level-cache = <&L2>;
+
+			L2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x40000>; // L2, 256 KB
+				cache-unified;
+			};
 		};
 	};
 
@@ -71,20 +86,63 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&thermal_sensor>;
+
+			trips {
+				cpu_normal: cpu-alert0 {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu_hot: cpu-alert1 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_normal>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	clocks {
-		slow_xtal: slow_xtal {
+		slow_xtal: clock-slowxtal {
 			compatible = "fixed-clock";
+			clock-output-names = "slow_xtal";
 			#clock-cells = <0>;
 		};
 
-		main_xtal: main_xtal {
+		main_xtal: clock-mainxtal {
 			compatible = "fixed-clock";
+			clock-output-names = "main_xtal";
 			#clock-cells = <0>;
 		};
 
-		usb_clk: usb_clk {
+		usb_clk: clock-usbclk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			clock-output-names = "usb_clk";
 			clock-frequency = <48000000>;
 		};
 	};
@@ -107,6 +165,13 @@
 		ranges;
 	};
 
+	thermal_sensor: thermal-sensor {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc AT91_SAMA7G5_ADC_TEMP_CHANNEL>;
+		io-channel-names = "sensor-channel";
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -152,7 +217,7 @@
 			};
 		};
 
-		securam: securam@e0000000 {
+		securam: sram@e0000000 {
 			compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
 			reg = <0xe0000000 0x4000>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
@@ -189,7 +254,7 @@
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 		};
 
-		pmc: pmc@e0018000 {
+		pmc: clock-controller@e0018000 {
 			compatible = "microchip,sama7g5-pmc", "syscon";
 			reg = <0xe0018000 0x200>;
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
@@ -205,7 +270,7 @@
 			clocks = <&clk32k 0>;
 		};
 
-		shdwc: shdwc@e001d010 {
+		shdwc: poweroff@e001d010 {
 			compatible = "microchip,sama7g5-shdwc", "syscon";
 			reg = <0xe001d010 0x10>;
 			clocks = <&clk32k 0>;
@@ -220,7 +285,7 @@
 			compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
 			reg = <0xe001d020 0x30>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk32k 0>;
+			clocks = <&clk32k 1>;
 		};
 
 		clk32k: clock-controller@e001d050 {
@@ -314,8 +379,8 @@
 			compatible = "bosch,m_can";
 			reg = <0xe0828000 0x100>, <0x100000 0x7800>;
 			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "int0", "int1";
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
 			clock-names = "hclk", "cclk";
@@ -330,8 +395,8 @@
 			compatible = "bosch,m_can";
 			reg = <0xe082c000 0x100>, <0x100000 0xbc00>;
 			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "int0", "int1";
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
 			clock-names = "hclk", "cclk";
@@ -346,8 +411,8 @@
 			compatible = "bosch,m_can";
 			reg = <0xe0830000 0x100>, <0x100000 0x10000>;
 			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "int0", "int1";
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 63>, <&pmc PMC_TYPE_GCK 63>;
 			clock-names = "hclk", "cclk";
@@ -362,8 +427,8 @@
 			compatible = "bosch,m_can";
 			reg = <0xe0834000 0x100>, <0x110000 0x4400>;
 			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "int0", "int1";
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 64>, <&pmc PMC_TYPE_GCK 64>;
 			clock-names = "hclk", "cclk";
@@ -378,8 +443,8 @@
 			compatible = "bosch,m_can";
 			reg = <0xe0838000 0x100>, <0x110000 0x8800>;
 			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "int0", "int1";
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 65>, <&pmc PMC_TYPE_GCK 65>;
 			clock-names = "hclk", "cclk";
@@ -394,8 +459,8 @@
 			compatible = "bosch,m_can";
 			reg = <0xe083c000 0x100>, <0x110000 0xcc00>;
 			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "int0", "int1";
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
 			clock-names = "hclk", "cclk";
@@ -419,6 +484,9 @@
 			atmel,min-sample-rate-hz = <200000>;
 			atmel,max-sample-rate-hz = <20000000>;
 			atmel,startup-time-ms = <4>;
+			#io-channel-cells = <1>;
+			nvmem-cells = <&temperature_calib>;
+			nvmem-cell-names = "temperature_calib";
 			status = "disabled";
 		};
 
@@ -461,6 +529,57 @@
 			status = "disabled";
 		};
 
+		csi2dc: csi2dc@e1404000 {
+			compatible = "microchip,sama7g5-csi2dc";
+			reg = <0xe1404000 0x500>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&xisc>;
+			clock-names = "pclk", "scck";
+			assigned-clocks = <&xisc>;
+			assigned-clock-rates = <266000000>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					csi2dc_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					csi2dc_out: endpoint {
+						bus-width = <14>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+						remote-endpoint = <&xisc_in>;
+					};
+				};
+			};
+		};
+
+		xisc: xisc@e1408000 {
+			compatible = "microchip,sama7g5-isc";
+			reg = <0xe1408000 0x2000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+			clock-names = "hclock";
+			#clock-cells = <0>;
+			clock-output-names = "isc-mck";
+			status = "disabled";
+
+			port {
+				xisc_in: endpoint {
+					bus-type = <5>; /* Parallel */
+					bus-width = <14>;
+					hsync-active = <1>;
+					vsync-active = <1>;
+					remote-endpoint = <&csi2dc_out>;
+				};
+			};
+		};
+
 		pwm: pwm@e1604000 {
 			compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm";
 			reg = <0xe1604000 0x4000>;
@@ -592,7 +711,7 @@
 		};
 
 		flx0: flexcom@e1818000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe1818000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
 			#address-cells = <1>;
@@ -603,11 +722,12 @@
 			uart0: serial@200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
-					<&dma1 AT91_XDMAC_DT_PERID(5)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(5)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -616,7 +736,7 @@
 		};
 
 		flx1: flexcom@e181c000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe181c000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
 			#address-cells = <1>;
@@ -633,14 +753,14 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
-					<&dma0 AT91_XDMAC_DT_PERID(7)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(7)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 		};
 
 		flx3: flexcom@e1824000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe1824000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
 			#address-cells = <1>;
@@ -651,11 +771,12 @@
 			uart3: serial@200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
-					<&dma1 AT91_XDMAC_DT_PERID(11)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(11)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -683,7 +804,7 @@
 		};
 
 		flx4: flexcom@e2018000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe2018000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
 			#address-cells = <1>;
@@ -694,11 +815,12 @@
 			uart4: serial@200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
-					<&dma1 AT91_XDMAC_DT_PERID(13)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(13)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -708,7 +830,7 @@
 		};
 
 		flx7: flexcom@e2024000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe2024000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
 			#address-cells = <1>;
@@ -719,11 +841,12 @@
 			uart7: serial@200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
-					<&dma1 AT91_XDMAC_DT_PERID(19)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(19)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -735,12 +858,12 @@
 		gmac0: ethernet@e2800000 {
 			compatible = "microchip,sama7g5-gem";
 			reg = <0xe2800000 0x1000>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>;
 			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
 			assigned-clocks = <&pmc PMC_TYPE_GCK 51>;
@@ -751,8 +874,8 @@
 		gmac1: ethernet@e2804000 {
 			compatible = "microchip,sama7g5-emac";
 			reg = <0xe2804000 0x1000>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>;
 			clock-names = "pclk", "hclk";
 			status = "disabled";
@@ -801,7 +924,7 @@
 		};
 
 		flx8: flexcom@e2818000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe2818000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
 			#address-cells = <1>;
@@ -818,14 +941,14 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
-					<&dma0 AT91_XDMAC_DT_PERID(21)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(21)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 		};
 
 		flx9: flexcom@e281c000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe281c000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
 			#address-cells = <1>;
@@ -842,14 +965,38 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
-					<&dma0 AT91_XDMAC_DT_PERID(23)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(23)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx10: flexcom@e2820000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2820000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2820000 0x800>;
+			status = "disabled";
+
+			i2c10: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(26)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(25)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 		};
 
 		flx11: flexcom@e2824000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe2824000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
 			#address-cells = <1>;
@@ -866,9 +1013,9 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				atmel,fifo-size = <32>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(27)>,
-					    <&dma0 AT91_XDMAC_DT_PERID(28)>;
-				dma-names = "rx", "tx";
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(27)>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 		};
@@ -883,6 +1030,17 @@
 			reg = <0xe3804000 0x1000>;
 		};
 
+		otpc: efuse@e8c00000 {
+			compatible = "microchip,sama7g5-otpc", "syscon";
+			reg = <0xe8c00000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			temperature_calib: calib@1 {
+				reg = <OTP_PKT(1) 76>;
+			};
+		};
+
 		gic: interrupt-controller@e8c11000 {
 			compatible = "arm,cortex-a7-gic";
 			#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/tny_a9260.dts b/arch/arm/boot/dts/microchip/tny_a9260.dts
index ef6d586ce887..f0f2a787d669 100644
--- a/arch/arm/boot/dts/tny_a9260.dts
+++ b/arch/arm/boot/dts/microchip/tny_a9260.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * tny_a9260.dts - Device Tree file for Caloa TNY A9260 board
+ * tny_a9260.dts - Device Tree file for Calao TNY A9260 board
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi
index 70e5635c78ed..4d4377f51bec 100644
--- a/arch/arm/boot/dts/tny_a9260_common.dtsi
+++ b/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * tny_a9260_common.dtsi - Device Tree file for Caloa TNY A926x board
+ * tny_a9260_common.dtsi - Device Tree file for Calao TNY A926x board
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/microchip/tny_a9263.dts
index 62b7d9f9a926..fd8244b56e05 100644
--- a/arch/arm/boot/dts/tny_a9263.dts
+++ b/arch/arm/boot/dts/microchip/tny_a9263.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ * usb_a9263.dts - Device Tree file for Calao USB A9293 board
  *
  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
@@ -64,7 +64,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/tny_a9g20.dts b/arch/arm/boot/dts/microchip/tny_a9g20.dts
index 118d766a1265..cebd5696a2c1 100644
--- a/arch/arm/boot/dts/tny_a9g20.dts
+++ b/arch/arm/boot/dts/microchip/tny_a9g20.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * tny_a9g20.dts - Device Tree file for Caloa TNY A9G20 board
+ * tny_a9g20.dts - Device Tree file for Calao TNY A9G20 board
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
diff --git a/arch/arm/boot/dts/microchip/usb_a9260.dts b/arch/arm/boot/dts/microchip/usb_a9260.dts
new file mode 100644
index 000000000000..3b61e7145060
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/usb_a9260.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9260.dts - Device Tree file for Calao USB A9260 board
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+#include "usb_a9260_common.dtsi"
+
+/ {
+	model = "Calao USB A9260";
+	compatible = "calao,usb-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			shdwc: poweroff@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi
index 8744b5f6f792..da32c5fdcc47 100644
--- a/arch/arm/boot/dts/usb_a9260_common.dtsi
+++ b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi
@@ -1,11 +1,16 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * usb_a926x.dts - Device Tree file for Caloa USB A926x board
+ * usb_a926x.dts - Device Tree file for Calao USB A926x board
  *
  *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
 
 / {
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+	};
+
 	clocks {
 		slow_xtal {
 			clock-frequency = <32768>;
@@ -16,6 +21,10 @@
 		};
 	};
 
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
 	ahb {
 		apb {
 			dbgu: serial@fffff200 {
@@ -111,7 +120,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -122,17 +131,14 @@
 
 		user_led {
 			label = "user_led";
-			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
+			gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		user_pb {
+		button-user-pb {
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/microchip/usb_a9263.dts
index b6cb9cdf8197..8e1a3fb61087 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/microchip/usb_a9263.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ * usb_a9263.dts - Device Tree file for Calao USB A9293 board
  *
  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
@@ -9,7 +9,7 @@
 
 / {
 	model = "Calao USB A9263";
-	compatible = "atmel,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+	compatible = "calao,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9";
 
 	chosen {
 		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
@@ -58,7 +58,7 @@
 			};
 
 			spi0: spi@fffa4000 {
-				cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
+				cs-gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
 				status = "okay";
 				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
@@ -67,7 +67,7 @@
 				};
 			};
 
-			shdwc@fffffd10 {
+			poweroff@fffffd10 {
 				atmel,wakeup-counter = <10>;
 				atmel,wakeup-rtt-timer;
 			};
@@ -84,7 +84,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
@@ -139,7 +139,7 @@
 			};
 		};
 
-		usb0: ohci@a00000 {
+		usb0: usb@a00000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -151,16 +151,13 @@
 		user_led {
 			label = "user_led";
 			gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
 		};
 	};
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		user_pb {
+		button-user-pb {
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
index 08d58081201a..5b1d80c0ab26 100644
--- a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi
+++ b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
@@ -65,28 +65,26 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		user_pb1 {
+		button-user-pb1 {
 			label = "user_pb1";
 			gpios = <&pioB 25 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
 		};
 
-		user_pb2 {
+		button-user-pb2 {
 			label = "user_pb2";
 			gpios = <&pioB 13 GPIO_ACTIVE_LOW>;
 			linux,code = <0x101>;
 		};
 
-		user_pb3 {
+		button-user-pb3 {
 			label = "user_pb3";
 			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
 			linux,code = <0x102>;
 		};
 
-		user_pb4 {
+		button-user-pb4 {
 			label = "user_pb4";
 			gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
diff --git a/arch/arm/boot/dts/microchip/usb_a9g20.dts b/arch/arm/boot/dts/microchip/usb_a9g20.dts
new file mode 100644
index 000000000000..555291cd30b3
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/usb_a9g20.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9g20.dts - Device Tree file for Calao USB A9G20 board
+ *
+ *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include "usb_a9260_common.dtsi"
+
+/ {
+	model = "Calao USB A9G20";
+	compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+};
+
+&spi0 {
+	cs-gpios = <&pioC 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+	/* TODO: Some revisions might have a dataflash here instead of an EEPROM */
+	eeprom@0 {
+		compatible = "st,m95640", "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <2000000>;
+		size = <8192>;
+		pagesize = <32>;
+		address-width = <16>;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts b/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts
new file mode 100644
index 000000000000..2eda00477bc5
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9g20_lpw.dts - Device Tree file for Calao USB A9G20 Low Power board
+ *
+ *  Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include "usb_a9260_common.dtsi"
+
+/ {
+	model = "Calao USB A9G20 Low Power";
+	compatible = "calao,usb-a9g20-lpw", "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			spi1: spi@fffcc000 {
+				cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+				mmc@0 {
+					compatible = "mmc-spi-slot";
+					reg = <0>;
+					voltage-ranges = <3200 3400>;
+					spi-max-frequency = <25000000>;
+					interrupt-parent = <&pioC>;
+					interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
+				};
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		rtc@56 {
+			compatible = "microcrystal,rv3029";
+			reg = <0x56>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
deleted file mode 100644
index c7a1f3ffc48c..000000000000
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ /dev/null
@@ -1,737 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "omap443x.dtsi"
-#include "motorola-cpcap-mapphone.dtsi"
-
-/ {
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	aliases {
-		display0 = &lcd0;
-		display1 = &hdmi0;
-	};
-
-	/*
-	 * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
-	 * then 1023 - 1024 seems to contain mbm.
-	 */
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x3fd00000>;	/* 1021 MB */
-	};
-
-	/* Poweroff GPIO probably connected to CPCAP */
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff_gpio>;
-		pinctrl-names = "default";
-		gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;	/* gpio50 */
-	};
-
-	hdmi0: connector {
-		compatible = "hdmi-connector";
-		pinctrl-0 = <&hdmi_hpd_gpio>;
-		pinctrl-names = "default";
-		label = "hdmi";
-		type = "d";
-
-		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;	/* gpio63 */
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_out>;
-			};
-		};
-	};
-
-	/*
-	 * HDMI 5V regulator probably sourced from battery. Let's keep
-	 * keep this as always enabled for HDMI to work until we've
-	 * figured what the encoder chip is.
-	 */
-	hdmi_regulator: regulator-hdmi {
-		compatible = "regulator-fixed";
-		regulator-name = "hdmi";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>;	/* gpio59 */
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	/* FS USB Host PHY on port 1 for mdm6600 */
-	fsusb1_phy: usb-phy@1 {
-		compatible = "motorola,mapphone-mdm6600";
-		pinctrl-0 = <&usb_mdm6600_pins>;
-		pinctrl-names = "default";
-		enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
-		power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;	/* gpio_54 */
-		reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;	/* gpio_49 */
-		/* mode: gpio_148 gpio_149 */
-		motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
-				      <&gpio5 21 GPIO_ACTIVE_HIGH>;
-		/* cmd: gpio_103 gpio_104 gpio_142 */
-		motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
-				     <&gpio4 8 GPIO_ACTIVE_HIGH>,
-				     <&gpio5 14 GPIO_ACTIVE_HIGH>;
-		/* status: gpio_52 gpio_53 gpio_55 */
-		motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
-					<&gpio2 21 GPIO_ACTIVE_HIGH>,
-					<&gpio2 23 GPIO_ACTIVE_HIGH>;
-		#phy-cells = <0>;
-	};
-
-	/* HS USB host TLL nop-phy on port 2 for w3glte */
-	hsusb2_phy: usb-phy@2 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-
-	/* LCD regulator from sw5 source */
-	lcd_regulator: regulator-lcd {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd";
-		regulator-min-microvolt = <5050000>;
-		regulator-max-microvolt = <5050000>;
-		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;	/* gpio96 */
-		enable-active-high;
-		vin-supply = <&sw5>;
-	};
-
-	/* This is probably coming straight from the battery.. */
-	wl12xx_vmmc: regulator-wl12xx {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1650000>;
-		regulator-max-microvolt = <1650000>;
-		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;	/* gpio94 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	soundcard {
-		compatible = "audio-graph-card";
-		label = "Mapphone Audio";
-
-		widgets =
-			"Speaker", "Earpiece",
-			"Speaker", "Loudspeaker",
-			"Headphone", "Headphone Jack",
-			"Microphone", "Internal Mic";
-
-		routing =
-			"Earpiece", "EP",
-			"Loudspeaker", "SPKR",
-			"Headphone Jack", "HSL",
-			"Headphone Jack", "HSR",
-			"MICR", "Internal Mic";
-
-		dais = <&mcbsp2_port>, <&mcbsp3_port>;
-	};
-
-	pwm8: dmtimer-pwm-8 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_direction_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer8>;
-		ti,clock-source = <0x01>;
-	};
-
-	pwm9: dmtimer-pwm-9 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_enable_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer9>;
-		ti,clock-source = <0x01>;
-	};
-
-	vibrator {
-		compatible = "pwm-vibrator";
-		pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
-		pwm-names = "enable", "direction";
-		direction-duty-cycle-ns = <10000000>;
-	};
-
-	backlight: backlight {
-		compatible = "led-backlight";
-
-		leds = <&backlight_led>;
-		brightness-levels = <31 63 95 127 159 191 223 255>;
-		default-brightness-level = <6>;
-	};
-};
-
-&cpu_thermal {
-	polling-delay = <10000>; /* milliseconds */
-};
-
-&cpu_alert0 {
-        temperature = <80000>; /* millicelsius */
-};
-
-&cpu0 {
-        /*
-	 * Note that the 1.2GiHz mode is enabled for all SoC variants for
-	 * the Motorola Android Linux v3.0.8 based kernel.
-	 */
-        operating-points = <
-	        /* kHz    uV */
-	        300000  1025000
-	        600000  1200000
-	        800000  1313000
-	        1008000 1375000
-		1200000 1375000
-        >;
-};
-
-&dss {
-	status = "okay";
-};
-
-&dsi1 {
-	status = "okay";
-	vdd-supply = <&vcsi>;
-
-	port {
-		dsi1_out_ep: endpoint {
-			remote-endpoint = <&lcd0_in>;
-			lanes = <0 1 2 3 4 5>;
-		};
-	};
-
-	lcd0: panel@0 {
-		compatible = "motorola,droid4-panel", "panel-dsi-cm";
-		reg = <0>;
-		label = "lcd0";
-		vddi-supply = <&lcd_regulator>;
-		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
-
-		backlight = <&backlight>;
-
-		width-mm = <50>;
-		height-mm = <89>;
-		rotation = <90>;
-
-		panel-timing {
-			clock-frequency = <0>;		/* Calculated by dsi */
-
-			hback-porch = <2>;
-			hactive = <540>;
-			hfront-porch = <0>;
-			hsync-len = <2>;
-
-			vback-porch = <1>;
-			vactive = <960>;
-			vfront-porch = <0>;
-			vsync-len = <1>;
-
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd0_in: endpoint {
-				remote-endpoint = <&dsi1_out_ep>;
-			};
-		};
-	};
-};
-
-&hdmi {
-	status = "okay";
-	pinctrl-0 = <&dss_hdmi_pins>;
-	pinctrl-names = "default";
-	vdda-supply = <&vdac>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&hdmi_connector_in>;
-			lanes = <1 0 3 2 5 4 7 6>;
-		};
-	};
-};
-
-/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
-&hdqw1w {
-	pinctrl-0 = <&hdq_pins>;
-	pinctrl-names = "default";
-	ti,mode = "1w";
-};
-
-&i2c1 {
-	tmp105@48 {
-		compatible = "ti,tmp105";
-		reg = <0x48>;
-		pinctrl-0 = <&tmp105_irq>;
-		pinctrl-names = "default";
-		/* kpd_row0.gpio_178 */
-		interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING
-				       &omap4_pmx_core 0x14e>;
-		interrupt-names = "irq", "wakeup";
-		wakeup-source;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vwlan2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* gpio176 */
-};
-
-&mmc2 {
-	vmmc-supply = <&vsdio>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins>;
-	vmmc-supply = <&wl12xx_vmmc>;
-	/* uart2_tx.sdmmc3_dat1 pad as wakeirq */
-	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core 0xde>;
-	interrupt-names = "irq", "wakeup";
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1285";
-		reg = <2>;
-		/* gpio_100 with gpmc_wait2 pad as wakeirq */
-		interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>,
-				      <&omap4_pmx_core 0x4e>;
-		interrupt-names = "irq", "wakeup";
-		ref-clock-frequency = <26000000>;
-		tcxo-clock-frequency = <26000000>;
-	};
-};
-
-&i2c2 {
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&touchscreen_pins>;
-
-		reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
-
-		/* gpio_183 with sys_nirq2 pad as wakeup */
-		interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
-				      <&omap4_pmx_core 0x160>;
-		interrupt-names = "irq", "wakeup";
-		wakeup-source;
-	};
-
-	isl29030@44 {
-		compatible = "isil,isl29030";
-		reg = <0x44>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&als_proximity_pins>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
-	};
-};
-
-&omap4_pmx_core {
-
-	/* hdmi_hpd.gpio_63 */
-	hdmi_hpd_gpio: pinmux_hdmi_hpd_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
-		>;
-	};
-
-	hdq_pins: pinmux_hdq_pins {
-		pinctrl-single,pins = <
-		/* 0x4a100120 hdq_sio.hdq_sio aa27 */
-		OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
-		>;
-	};
-
-	/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)
-		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)
-		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)
-		>;
-	};
-
-	/*
-	 * Android uses PIN_OFF_INPUT_PULLDOWN | PIN_INPUT_PULLUP | MUX_MODE3
-	 * for gpio_100, but the internal pull makes wlan flakey on some
-	 * devices. Off mode value should be tested if we have off mode working
-	 * later on.
-	 */
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-		/* 0x4a10008e gpmc_wait2.gpio_100 d23 */
-		OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3)
-
-		/* 0x4a100102 abe_mcbsp1_dx.sdmmc3_dat2 ab25 */
-		OMAP4_IOPAD(0x102, PIN_INPUT_PULLUP | MUX_MODE1)
-
-		/* 0x4a100104 abe_mcbsp1_fsx.sdmmc3_dat3 ac27 */
-		OMAP4_IOPAD(0x104, PIN_INPUT_PULLUP | MUX_MODE1)
-
-		/* 0x4a100118 uart2_cts.sdmmc3_clk ab26 */
-		OMAP4_IOPAD(0x118, PIN_INPUT | MUX_MODE1)
-
-		/* 0x4a10011a uart2_rts.sdmmc3_cmd ab27 */
-		OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE1)
-
-		/* 0x4a10011c uart2_rx.sdmmc3_dat0 aa25 */
-		OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE1)
-
-		/* 0x4a10011e uart2_tx.sdmmc3_dat1 aa26 */
-		OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE1)
-		>;
-	};
-
-	/* gpmc_ncs0.gpio_50 */
-	poweroff_gpio: pinmux_poweroff_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	/* kpd_row0.gpio_178 */
-	tmp105_irq: pinmux_tmp105_irq {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
-		/* gpio_60 */
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)
-		>;
-	};
-
-	touchscreen_pins: pinmux_touchscreen_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	als_proximity_pins: pinmux_als_proximity_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	usb_mdm6600_pins: pinmux_usb_mdm6600_pins {
-		pinctrl-single,pins = <
-		/* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
-		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
-
-		/* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
-		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
-
-		/* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
-		OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
-
-		/* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
-		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
-
-		/* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
-		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
-
-		/* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
-		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
-
-		/* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
-		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
-
-		/* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
-		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
-
-		/* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
-		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
-
-		/* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
-		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
-
-		/* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
-		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
-		>;
-	};
-
-	usb_ulpi_pins: pinmux_usb_ulpi_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x196, MUX_MODE7)
-		OMAP4_IOPAD(0x198, MUX_MODE7)
-		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-
-	/* usb0_otg_dp and usb0_otg_dm */
-	usb_utmi_pins: pinmux_usb_utmi_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)
-		OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)
-		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
-		>;
-	};
-
-	/*
-	 * Note that the v3.0.8 stock userspace dynamically remuxes uart1
-	 * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7
-	 * when not used. If needed, we can add rts pin remux later based
-	 * on power measurements.
-	 */
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-		/* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */
-		OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)
-
-		/* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */
-		OMAP4_IOPAD(0x13e, MUX_MODE1)
-
-		/* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */
-		OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1)
-
-		/* 0x4a1001ca dpm_emu14.uart1_rx aa3 */
-		OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2)
-		>;
-	};
-
-	/* uart3_tx_irtx and uart3_rx_irrx */
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x196, MUX_MODE7)
-		OMAP4_IOPAD(0x198, MUX_MODE7)
-		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1ba, MUX_MODE2)
-		OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2)
-		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
-		>;
-	};
-
-	uart4_pins: pinmux_uart4_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)		/* uart4_rx */
-		OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)		/* uart4_tx */
-		OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5)	/* uart4_cts */
-		OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5)	/* uart4_rts */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_clkx */
-		OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_dr */
-		OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0)	/* abe_mcbsp2_dx */
-		OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_fsx */
-		>;
-	};
-
-	mcbsp3_pins: pinmux_mcbsp3_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_dr */
-		OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1)	/* abe_mcbsp3_dx */
-		OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_clkx */
-		OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_fsx */
-		>;
-	};
-
-	vibrator_direction_pin: pinmux_vibrator_direction_pin {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)	/* dmtimer8_pwm_evt (gpio_27) */
-		>;
-	};
-
-	vibrator_enable_pin: pinmux_vibrator_enable_pin {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)	/* dmtimer9_pwm_evt (gpio_28) */
-		>;
-	};
-};
-
-&omap4_pmx_wkup {
-	usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
-		/* gpio_wk0 */
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
-		>;
-	};
-};
-
-/* RNG is used by secure mode and not accessible */
-&rng_target {
-	status = "disabled";
-};
-
-/* Configure pwm clock source for timers 8 & 9 */
-&timer8 {
-	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_clkin_ck>;
-};
-
-&timer9 {
-	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_clkin_ck>;
-};
-
-/*
- * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149
- * for wake-up events for both the USB PHY and the UART. We can use gpio_149
- * pad as the shared wakeirq for the UART rather than the RX or CTS pad as we
- * have gpio_149 trigger before the UART transfer starts.
- */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core 0x110>;
-	uart-has-rtscts;
-	current-speed = <115200>;
-};
-
-&uart3 {
-	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core 0x17c>;
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-
-	bluetooth {
-		compatible = "ti,wl1285-st";
-		enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */
-		max-speed = <3686400>;
-	};
-};
-
-&usbhsohci {
-	phys = <&fsusb1_phy>;
-	phy-names = "usb";
-};
-
-&usbhsehci {
-	phys = <&hsusb2_phy>;
-};
-
-&usbhshost {
-	port1-mode = "ohci-phy-4pin-dpdm";
-	port2-mode = "ehci-tll";
-};
-
-/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
-&usb_otg_hs {
-	interface-type = <1>;
-	mode = <3>;
-
-	/*
-	 * Max 300 mA steps based on similar PMIC MC13783UG.pdf "Table 10-4.
-	 * VBUS Regulator Main Characteristics". Binding uses 2 mA units.
-	 */
-	power = <150>;
-};
-
-&i2c4 {
-	ak8975: magnetometer@c {
-		compatible = "asahi-kasei,ak8975";
-		reg = <0x0c>;
-
-		vdd-supply = <&vhvio>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
-
-		rotation-matrix = "-1", "0", "0",
-				  "0", "1", "0",
-				  "0", "0", "-1";
-
-	};
-};
-
-&mcbsp2 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-	status = "okay";
-
-	mcbsp2_port: port {
-		cpu_dai2: endpoint {
-			dai-format = "i2s";
-			remote-endpoint = <&cpcap_audio_codec0>;
-			frame-master = <&cpcap_audio_codec0>;
-			bitclock-master = <&cpcap_audio_codec0>;
-		};
-	};
-};
-
-&mcbsp3 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp3_pins>;
-	status = "okay";
-
-	mcbsp3_port: port {
-		cpu_dai3: endpoint {
-			dai-format = "dsp_a";
-			frame-master = <&cpcap_audio_codec1>;
-			bitclock-master = <&cpcap_audio_codec1>;
-			remote-endpoint = <&cpcap_audio_codec1>;
-		};
-	};
-};
-
-&cpcap_audio_codec0 {
-	remote-endpoint = <&cpu_dai2>;
-};
-
-&cpcap_audio_codec1 {
-	remote-endpoint = <&cpu_dai3>;
-};
diff --git a/arch/arm/boot/dts/moxa/Makefile b/arch/arm/boot/dts/moxa/Makefile
new file mode 100644
index 000000000000..d61ce8d4e732
--- /dev/null
+++ b/arch/arm/boot/dts/moxa/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MOXART) += \
+	moxart-uc7112lx.dtb
diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxa/moxart-uc7112lx.dts
index eb5291b0ee3a..e07b807b4cec 100644
--- a/arch/arm/boot/dts/moxart-uc7112lx.dts
+++ b/arch/arm/boot/dts/moxa/moxart-uc7112lx.dts
@@ -79,7 +79,7 @@
 	clocks = <&ref12>;
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxa/moxart.dtsi
index f5f070a87482..11cbea5b94d2 100644
--- a/arch/arm/boot/dts/moxart.dtsi
+++ b/arch/arm/boot/dts/moxa/moxart.dtsi
@@ -93,8 +93,8 @@
 			clock-names = "PCLK";
 		};
 
-		sdhci: sdhci@98e00000 {
-			compatible = "moxa,moxart-sdhci";
+		mmc: mmc@98e00000 {
+			compatible = "moxa,moxart-mmc";
 			reg = <0x98e00000 0x5C>;
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_apb>;
@@ -138,7 +138,7 @@
 			status = "disabled";
 		};
 
-		uart0: uart@98200000 {
+		uart0: serial@98200000 {
 			compatible = "ns16550a";
 			reg = <0x98200000 0x20>;
 			interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi
deleted file mode 100644
index d304b62d24b5..000000000000
--- a/arch/arm/boot/dts/mt7623a.dtsi
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2017-2018 MediaTek Inc.
- * Author: Sean Wang <sean.wang@mediatek.com>
- *
- */
-
-/dts-v1/;
-#include <dt-bindings/power/mt7623a-power.h>
-#include "mt7623.dtsi"
-
-&afe {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
-};
-
-&crypto {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
-};
-
-&eth {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
-};
-
-&nandc {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
-};
-
-&pcie {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
-};
-
-&scpsys {
-	compatible = "mediatek,mt7623a-scpsys";
-	clocks = <&topckgen CLK_TOP_ETHIF_SEL>;
-	clock-names = "ethif";
-};
-
-&usb0 {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
-};
-
-&usb1 {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
-};
-
-&usb2 {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
-};
diff --git a/arch/arm/boot/dts/nspire-clp.dts b/arch/arm/boot/dts/nspire-clp.dts
deleted file mode 100644
index f52f38c61588..000000000000
--- a/arch/arm/boot/dts/nspire-clp.dts
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/boot/nspire-clp.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- */
-/dts-v1/;
-
-/include/ "nspire-classic.dtsi"
-
-&keypad {
-	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00020039
-	0x0004002c 	0x00050034 	0x00060015
-	0x0007000b 	0x0008002d 	0x01000033
-	0x0101004e 	0x01020011 	0x01030004
-	0x0104002f 	0x01050003 	0x01060016
-	0x01070002 	0x01080014 	0x02000062
-	0x0201000c 	0x0202001f 	0x02030007
-	0x02040013 	0x02050006 	0x02060010
-	0x02070005 	0x02080019 	0x03000027
-	0x03010037 	0x03020018 	0x0303000a
-	0x03040031 	0x03050009 	0x03060032
-	0x03070008 	0x03080026 	0x04000028
-	0x04010035 	0x04020025 	0x04040024
-	0x04060017 	0x04080023 	0x05000028
-	0x05020022 	0x0503001b 	0x05040021
-	0x0505001a 	0x05060012 	0x0507006f
-	0x05080020 	0x0509002a 	0x0601001c
-	0x0602002e 	0x06030068 	0x06040030
-	0x0605006d 	0x0606001e 	0x06070001
-	0x0608002b 	0x0609000f 	0x07000067
-	0x0702006a 	0x0704006c 	0x07060069
-	0x0707000e 	0x0708001d 	0x070a000d
-	>;
-};
-
-/ {
-	model = "TI-NSPIRE Clickpad";
-	compatible = "ti,nspire-clp";
-};
diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts
deleted file mode 100644
index 590b7dff6ae5..000000000000
--- a/arch/arm/boot/dts/nspire-cx.dts
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/boot/nspire-cx.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- */
-/dts-v1/;
-
-/include/ "nspire.dtsi"
-
-&lcd {
-	port {
-		clcd_pads: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&fast_timer {
-	/* compatible = "arm,sp804", "arm,primecell"; */
-};
-
-&uart {
-	compatible = "arm,pl011", "arm,primecell";
-
-	clocks = <&uart_clk>, <&apb_pclk>;
-	clock-names = "uart_clk", "apb_pclk";
-};
-
-&timer0 {
-	compatible = "arm,sp804", "arm,primecell";
-};
-
-&timer1 {
-	compatible = "arm,sp804", "arm,primecell";
-};
-
-&base_clk {
-	compatible = "lsi,nspire-cx-clock";
-};
-
-&ahb_clk {
-	compatible = "lsi,nspire-cx-ahb-divider";
-};
-
-&keypad {
-	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00040039
-	0x0005002c 	0x00060015 	0x0007000b
-	0x0008000f 	0x0100002d 	0x01010011
-	0x0102002f 	0x01030004 	0x01040016
-	0x01050014 	0x0106001f 	0x01070002
-	0x010a006a 	0x02000013 	0x02010010
-	0x02020019 	0x02030007 	0x02040018
-	0x02050031 	0x02060032 	0x02070005
-	0x02080028 	0x0209006c 	0x03000026
-	0x03010025 	0x03020024 	0x0303000a
-	0x03040017 	0x03050023 	0x03060022
-	0x03070008 	0x03080035 	0x03090069
-	0x04000021 	0x04010012 	0x04020020
-	0x0404002e 	0x04050030 	0x0406001e
-	0x0407000d 	0x04080037 	0x04090067
-	0x05010038 	0x0502000c 	0x0503001b
-	0x05040034 	0x0505001a 	0x05060006
-	0x05080027 	0x0509000e 	0x050a006f
-	0x0600002b 	0x0602004e 	0x06030068
-	0x06040003 	0x0605006d 	0x06060009
-	0x06070001 	0x0609000f 	0x0708002a
-	0x0709001d 	0x070a0033 	>;
-};
-
-&vbus_reg {
-	gpio = <&gpio 2 0>;
-};
-
-/ {
-	model = "TI-NSPIRE CX";
-	compatible = "ti,nspire-cx";
-
-	memory {
-		device_type = "memory";
-		reg = <0x10000000 0x4000000>; /* 64 MB */
-	};
-
-	uart_clk: uart_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		intc: interrupt-controller@dc000000 {
-			compatible = "arm,pl190-vic";
-			interrupt-controller;
-			reg = <0xdc000000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		apb@90000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			i2c@90050000 {
-				compatible = "snps,designware-i2c";
-				reg = <0x90050000 0x1000>;
-				interrupts = <20>;
-			};
-		};
-	};
-
-	panel {
-		compatible = "ti,nspire-cx-lcd-panel";
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&clcd_pads>;
-			};
-		};
-	};
-	chosen {
-		bootargs = "debug earlyprintk console=tty0 console=ttyAMA0,115200n8 root=/dev/ram0";
-	};
-};
diff --git a/arch/arm/boot/dts/nspire-tp.dts b/arch/arm/boot/dts/nspire-tp.dts
deleted file mode 100644
index f7d0faacd4cc..000000000000
--- a/arch/arm/boot/dts/nspire-tp.dts
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/boot/nspire-tp.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- */
-/dts-v1/;
-
-/include/ "nspire-classic.dtsi"
-
-&keypad {
-	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00040039
-	0x0005002c 	0x00060015 	0x0007000b
-	0x0008000f 	0x0100002d 	0x01010011
-	0x0102002f 	0x01030004 	0x01040016
-	0x01050014 	0x0106001f 	0x01070002
-	0x010a006a 	0x02000013 	0x02010010
-	0x02020019 	0x02030007 	0x02040018
-	0x02050031 	0x02060032 	0x02070005
-	0x02080028 	0x0209006c 	0x03000026
-	0x03010025 	0x03020024 	0x0303000a
-	0x03040017 	0x03050023 	0x03060022
-	0x03070008 	0x03080035 	0x03090069
-	0x04000021 	0x04010012 	0x04020020
-	0x0404002e 	0x04050030 	0x0406001e
-	0x0407000d 	0x04080037 	0x04090067
-	0x05010038 	0x0502000c 	0x0503001b
-	0x05040034 	0x0505001a 	0x05060006
-	0x05080027 	0x0509000e 	0x050a006f
-	0x0600002b 	0x0602004e 	0x06030068
-	0x06040003 	0x0605006d 	0x06060009
-	0x06070001 	0x0609000f 	0x0708002a
-	0x0709001d 	0x070a0033 	>;
-};
-
-/ {
-	model = "TI-NSPIRE Touchpad";
-	compatible = "ti,nspire-tp";
-};
diff --git a/arch/arm/boot/dts/nspire/Makefile b/arch/arm/boot/dts/nspire/Makefile
new file mode 100644
index 000000000000..82a2515bdd46
--- /dev/null
+++ b/arch/arm/boot/dts/nspire/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_NSPIRE) += \
+	nspire-cx.dtb \
+	nspire-tp.dtb \
+	nspire-clp.dtb
diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire/nspire-classic.dtsi
index 01e1bb7c3c6c..0ee53d3ecd54 100644
--- a/arch/arm/boot/dts/nspire-classic.dtsi
+++ b/arch/arm/boot/dts/nspire/nspire-classic.dtsi
@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- *  linux/arch/arm/boot/nspire-classic.dts
- *
  *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
  */
 
@@ -57,7 +55,7 @@
 };
 
 / {
-	memory {
+	memory@10000000 {
 		device_type = "memory";
 		reg = <0x10000000 0x2000000>; /* 32 MB */
 	};
diff --git a/arch/arm/boot/dts/nspire/nspire-clp.dts b/arch/arm/boot/dts/nspire/nspire-clp.dts
new file mode 100644
index 000000000000..c5773f770fd4
--- /dev/null
+++ b/arch/arm/boot/dts/nspire/nspire-clp.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+/include/ "nspire-classic.dtsi"
+
+&keypad {
+	linux,keymap = <
+		MATRIX_KEY(0,  0, 0x1c)
+		MATRIX_KEY(0,  1, 0x1c)
+		MATRIX_KEY(0,  2, 0x39)
+		MATRIX_KEY(0,  4, 0x2c)
+		MATRIX_KEY(0,  5, 0x34)
+		MATRIX_KEY(0,  6, 0x15)
+		MATRIX_KEY(0,  7, 0x0b)
+		MATRIX_KEY(0,  8, 0x2d)
+		MATRIX_KEY(1,  0, 0x33)
+		MATRIX_KEY(1,  1, 0x4e)
+		MATRIX_KEY(1,  2, 0x11)
+		MATRIX_KEY(1,  3, 0x04)
+		MATRIX_KEY(1,  4, 0x2f)
+		MATRIX_KEY(1,  5, 0x03)
+		MATRIX_KEY(1,  6, 0x16)
+		MATRIX_KEY(1,  7, 0x02)
+		MATRIX_KEY(1,  8, 0x14)
+		MATRIX_KEY(2,  0, 0x62)
+		MATRIX_KEY(2,  1, 0x0c)
+		MATRIX_KEY(2,  2, 0x1f)
+		MATRIX_KEY(2,  3, 0x07)
+		MATRIX_KEY(2,  4, 0x13)
+		MATRIX_KEY(2,  5, 0x06)
+		MATRIX_KEY(2,  6, 0x10)
+		MATRIX_KEY(2,  7, 0x05)
+		MATRIX_KEY(2,  8, 0x19)
+		MATRIX_KEY(3,  0, 0x27)
+		MATRIX_KEY(3,  1, 0x37)
+		MATRIX_KEY(3,  2, 0x18)
+		MATRIX_KEY(3,  3, 0x0a)
+		MATRIX_KEY(3,  4, 0x31)
+		MATRIX_KEY(3,  5, 0x09)
+		MATRIX_KEY(3,  6, 0x32)
+		MATRIX_KEY(3,  7, 0x08)
+		MATRIX_KEY(3,  8, 0x26)
+		MATRIX_KEY(4,  0, 0x28)
+		MATRIX_KEY(4,  1, 0x35)
+		MATRIX_KEY(4,  2, 0x25)
+		MATRIX_KEY(4,  4, 0x24)
+		MATRIX_KEY(4,  6, 0x17)
+		MATRIX_KEY(4,  8, 0x23)
+		MATRIX_KEY(5,  0, 0x28)
+		MATRIX_KEY(5,  2, 0x22)
+		MATRIX_KEY(5,  3, 0x1b)
+		MATRIX_KEY(5,  4, 0x21)
+		MATRIX_KEY(5,  5, 0x1a)
+		MATRIX_KEY(5,  6, 0x12)
+		MATRIX_KEY(5,  7, 0x6f)
+		MATRIX_KEY(5,  8, 0x20)
+		MATRIX_KEY(5,  9, 0x2a)
+		MATRIX_KEY(6,  1, 0x1c)
+		MATRIX_KEY(6,  2, 0x2e)
+		MATRIX_KEY(6,  3, 0x68)
+		MATRIX_KEY(6,  4, 0x30)
+		MATRIX_KEY(6,  5, 0x6d)
+		MATRIX_KEY(6,  6, 0x1e)
+		MATRIX_KEY(6,  7, 0x01)
+		MATRIX_KEY(6,  8, 0x2b)
+		MATRIX_KEY(6,  9, 0x0f)
+		MATRIX_KEY(7,  0, 0x67)
+		MATRIX_KEY(7,  2, 0x6a)
+		MATRIX_KEY(7,  4, 0x6c)
+		MATRIX_KEY(7,  6, 0x69)
+		MATRIX_KEY(7,  7, 0x0e)
+		MATRIX_KEY(7,  8, 0x1d)
+		MATRIX_KEY(7, 10, 0x0d)
+	>;
+};
+
+/ {
+	model = "TI-NSPIRE Clickpad";
+	compatible = "ti,nspire-clp";
+};
diff --git a/arch/arm/boot/dts/nspire/nspire-cx.dts b/arch/arm/boot/dts/nspire/nspire-cx.dts
new file mode 100644
index 000000000000..debeff0ec010
--- /dev/null
+++ b/arch/arm/boot/dts/nspire/nspire-cx.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+/include/ "nspire.dtsi"
+
+&lcd {
+	port {
+		clcd_pads: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&fast_timer {
+	/* compatible = "arm,sp804", "arm,primecell"; */
+};
+
+&uart {
+	compatible = "arm,pl011", "arm,primecell";
+
+	clocks = <&uart_clk>, <&apb_pclk>;
+	clock-names = "uartclk", "apb_pclk";
+};
+
+&timer0 {
+	compatible = "arm,sp804", "arm,primecell";
+};
+
+&timer1 {
+	compatible = "arm,sp804", "arm,primecell";
+};
+
+&base_clk {
+	compatible = "lsi,nspire-cx-clock";
+};
+
+&ahb_clk {
+	compatible = "lsi,nspire-cx-ahb-divider";
+};
+
+&keypad {
+	linux,keymap = <
+		MATRIX_KEY(0,  0, 0x1c)
+		MATRIX_KEY(0,  1, 0x1c)
+		MATRIX_KEY(0,  4, 0x39)
+		MATRIX_KEY(0,  5, 0x2c)
+		MATRIX_KEY(0,  6, 0x15)
+		MATRIX_KEY(0,  7, 0x0b)
+		MATRIX_KEY(0,  8, 0x0f)
+		MATRIX_KEY(1,  0, 0x2d)
+		MATRIX_KEY(1,  1, 0x11)
+		MATRIX_KEY(1,  2, 0x2f)
+		MATRIX_KEY(1,  3, 0x04)
+		MATRIX_KEY(1,  4, 0x16)
+		MATRIX_KEY(1,  5, 0x14)
+		MATRIX_KEY(1,  6, 0x1f)
+		MATRIX_KEY(1,  7, 0x02)
+		MATRIX_KEY(1, 10, 0x6a)
+		MATRIX_KEY(2,  0, 0x13)
+		MATRIX_KEY(2,  1, 0x10)
+		MATRIX_KEY(2,  2, 0x19)
+		MATRIX_KEY(2,  3, 0x07)
+		MATRIX_KEY(2,  4, 0x18)
+		MATRIX_KEY(2,  5, 0x31)
+		MATRIX_KEY(2,  6, 0x32)
+		MATRIX_KEY(2,  7, 0x05)
+		MATRIX_KEY(2,  8, 0x28)
+		MATRIX_KEY(2,  9, 0x6c)
+		MATRIX_KEY(3,  0, 0x26)
+		MATRIX_KEY(3,  1, 0x25)
+		MATRIX_KEY(3,  2, 0x24)
+		MATRIX_KEY(3,  3, 0x0a)
+		MATRIX_KEY(3,  4, 0x17)
+		MATRIX_KEY(3,  5, 0x23)
+		MATRIX_KEY(3,  6, 0x22)
+		MATRIX_KEY(3,  7, 0x08)
+		MATRIX_KEY(3,  8, 0x35)
+		MATRIX_KEY(3,  9, 0x69)
+		MATRIX_KEY(4,  0, 0x21)
+		MATRIX_KEY(4,  1, 0x12)
+		MATRIX_KEY(4,  2, 0x20)
+		MATRIX_KEY(4,  4, 0x2e)
+		MATRIX_KEY(4,  5, 0x30)
+		MATRIX_KEY(4,  6, 0x1e)
+		MATRIX_KEY(4,  7, 0x0d)
+		MATRIX_KEY(4,  8, 0x37)
+		MATRIX_KEY(4,  9, 0x67)
+		MATRIX_KEY(5,  1, 0x38)
+		MATRIX_KEY(5,  2, 0x0c)
+		MATRIX_KEY(5,  3, 0x1b)
+		MATRIX_KEY(5,  4, 0x34)
+		MATRIX_KEY(5,  5, 0x1a)
+		MATRIX_KEY(5,  6, 0x06)
+		MATRIX_KEY(5,  8, 0x27)
+		MATRIX_KEY(5,  9, 0x0e)
+		MATRIX_KEY(5, 10, 0x6f)
+		MATRIX_KEY(6,  0, 0x2b)
+		MATRIX_KEY(6,  2, 0x4e)
+		MATRIX_KEY(6,  3, 0x68)
+		MATRIX_KEY(6,  4, 0x03)
+		MATRIX_KEY(6,  5, 0x6d)
+		MATRIX_KEY(6,  6, 0x09)
+		MATRIX_KEY(6,  7, 0x01)
+		MATRIX_KEY(6,  9, 0x0f)
+		MATRIX_KEY(7,  8, 0x2a)
+		MATRIX_KEY(7,  9, 0x1d)
+		MATRIX_KEY(7, 10, 0x33)
+	>;
+};
+
+&vbus_reg {
+	gpio = <&gpio 2 0>;
+};
+
+/ {
+	model = "TI-NSPIRE CX";
+	compatible = "ti,nspire-cx";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x4000000>; /* 64 MB */
+	};
+
+	uart_clk: uart_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		intc: interrupt-controller@dc000000 {
+			compatible = "arm,pl190-vic";
+			interrupt-controller;
+			reg = <0xdc000000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		apb@90000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			i2c@90050000 {
+				compatible = "snps,designware-i2c";
+				reg = <0x90050000 0x1000>;
+				interrupts = <20>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "ti,nspire-cx-lcd-panel";
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&clcd_pads>;
+			};
+		};
+	};
+	chosen {
+		bootargs = "debug earlyprintk console=tty0 console=ttyAMA0,115200n8 root=/dev/ram0";
+	};
+};
diff --git a/arch/arm/boot/dts/nspire/nspire-tp.dts b/arch/arm/boot/dts/nspire/nspire-tp.dts
new file mode 100644
index 000000000000..3f0107f1c2c7
--- /dev/null
+++ b/arch/arm/boot/dts/nspire/nspire-tp.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+/include/ "nspire-classic.dtsi"
+
+&keypad {
+	linux,keymap = <
+		MATRIX_KEY(0,  0, 0x1c)
+		MATRIX_KEY(0,  1, 0x1c)
+		MATRIX_KEY(0,  4, 0x39)
+		MATRIX_KEY(0,  5, 0x2c)
+		MATRIX_KEY(0,  6, 0x15)
+		MATRIX_KEY(0,  7, 0x0b)
+		MATRIX_KEY(0,  8, 0x0f)
+		MATRIX_KEY(1,  0, 0x2d)
+		MATRIX_KEY(1,  1, 0x11)
+		MATRIX_KEY(1,  2, 0x2f)
+		MATRIX_KEY(1,  3, 0x04)
+		MATRIX_KEY(1,  4, 0x16)
+		MATRIX_KEY(1,  5, 0x14)
+		MATRIX_KEY(1,  6, 0x1f)
+		MATRIX_KEY(1,  7, 0x02)
+		MATRIX_KEY(1, 10, 0x6a)
+		MATRIX_KEY(2,  0, 0x13)
+		MATRIX_KEY(2,  1, 0x10)
+		MATRIX_KEY(2,  2, 0x19)
+		MATRIX_KEY(2,  3, 0x07)
+		MATRIX_KEY(2,  4, 0x18)
+		MATRIX_KEY(2,  5, 0x31)
+		MATRIX_KEY(2,  6, 0x32)
+		MATRIX_KEY(2,  7, 0x05)
+		MATRIX_KEY(2,  8, 0x28)
+		MATRIX_KEY(2,  9, 0x6c)
+		MATRIX_KEY(3,  0, 0x26)
+		MATRIX_KEY(3,  1, 0x25)
+		MATRIX_KEY(3,  2, 0x24)
+		MATRIX_KEY(3,  3, 0x0a)
+		MATRIX_KEY(3,  4, 0x17)
+		MATRIX_KEY(3,  5, 0x23)
+		MATRIX_KEY(3,  6, 0x22)
+		MATRIX_KEY(3,  7, 0x08)
+		MATRIX_KEY(3,  8, 0x35)
+		MATRIX_KEY(3,  9, 0x69)
+		MATRIX_KEY(4,  0, 0x21)
+		MATRIX_KEY(4,  1, 0x12)
+		MATRIX_KEY(4,  2, 0x20)
+		MATRIX_KEY(4,  4, 0x2e)
+		MATRIX_KEY(4,  5, 0x30)
+		MATRIX_KEY(4,  6, 0x1e)
+		MATRIX_KEY(4,  7, 0x0d)
+		MATRIX_KEY(4,  8, 0x37)
+		MATRIX_KEY(4,  9, 0x67)
+		MATRIX_KEY(5,  1, 0x38)
+		MATRIX_KEY(5,  2, 0x0c)
+		MATRIX_KEY(5,  3, 0x1b)
+		MATRIX_KEY(5,  4, 0x34)
+		MATRIX_KEY(5,  5, 0x1a)
+		MATRIX_KEY(5,  6, 0x06)
+		MATRIX_KEY(5,  8, 0x27)
+		MATRIX_KEY(5,  9, 0x0e)
+		MATRIX_KEY(5, 10, 0x6f)
+		MATRIX_KEY(6,  0, 0x2b)
+		MATRIX_KEY(6,  2, 0x4e)
+		MATRIX_KEY(6,  3, 0x68)
+		MATRIX_KEY(6,  4, 0x03)
+		MATRIX_KEY(6,  5, 0x6d)
+		MATRIX_KEY(6,  6, 0x09)
+		MATRIX_KEY(6,  7, 0x01)
+		MATRIX_KEY(6,  9, 0x0f)
+		MATRIX_KEY(7,  8, 0x2a)
+		MATRIX_KEY(7,  9, 0x1d)
+		MATRIX_KEY(7, 10, 0x33)
+	>;
+};
+
+/ {
+	model = "TI-NSPIRE Touchpad";
+	compatible = "ti,nspire-tp";
+};
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire/nspire.dtsi
index bb240e6a3a6f..95588b716c6f 100644
--- a/arch/arm/boot/dts/nspire.dtsi
+++ b/arch/arm/boot/dts/nspire/nspire.dtsi
@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- *  linux/arch/arm/boot/nspire.dtsi
- *
  *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
  */
 
@@ -11,8 +9,13 @@
 	interrupt-parent = <&intc>;
 
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		cpu@0 {
 			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
@@ -21,8 +24,15 @@
 	};
 
 	sram: sram@a4000000 {
-		device = "memory";
-		reg = <0xa4000000 0x20000>;
+		compatible = "mmio-sram";
+		reg = <0xa4000000 0x20000>; /* 128k */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xa4000000 0x20000>;
+
+		sram@0 {
+			reg = <0x0 0x20000>;
+		};
 	};
 
 	timer_clk: timer_clk {
@@ -59,7 +69,6 @@
 		compatible = "regulator-fixed";
 
 		regulator-name = "USB VBUS output";
-		regulator-type = "voltage";
 
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -161,9 +170,12 @@
 			};
 
 			watchdog: watchdog@90060000 {
-				compatible = "arm,amba-primecell";
+				compatible = "arm,sp805", "arm,primecell";
 				reg = <0x90060000 0x1000>;
 				interrupts = <3>;
+				clocks = <&apb_pclk>, <&apb_pclk>;
+				clock-names = "wdog_clk", "apb_pclk";
+				status = "disabled";
 			};
 
 			rtc: rtc@90090000 {
@@ -172,7 +184,14 @@
 			};
 
 			misc: misc@900a0000 {
+				compatible = "ti,nspire-misc", "syscon", "simple-mfd";
 				reg = <0x900a0000 0x1000>;
+
+				reboot {
+					compatible = "syscon-reboot";
+					offset = <0x08>;
+					value = <0x02>;
+				};
 			};
 
 			pwr: pwr@900b0000 {
diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
deleted file mode 100644
index 30eed40b89b5..000000000000
--- a/arch/arm/boot/dts/nuvoton-npcm750.dtsi
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com
-// Copyright 2018 Google, Inc.
-
-#include "nuvoton-common-npcm7xx.dtsi"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "nuvoton,npcm750-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			clocks = <&clk NPCM7XX_CLK_CPU>;
-			clock-names = "clk_cpu";
-			reg = <0>;
-			next-level-cache = <&l2>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			clocks = <&clk NPCM7XX_CLK_CPU>;
-			clock-names = "clk_cpu";
-			reg = <1>;
-			next-level-cache = <&l2>;
-		};
-	};
-
-	soc {
-		timer@3fe600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x3fe600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&clk NPCM7XX_CLK_AHB>;
-		};
-	};
-
-	ahb {
-		gmac1: eth@f0804000 {
-			device_type = "network";
-			compatible = "snps,dwmac";
-			reg = <0xf0804000 0x2000>;
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-			ethernet = <1>;
-			clocks = <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>;
-			clock-names = "stmmaceth", "clk_gmac";
-			pinctrl-names = "default";
-			pinctrl-0 = <&rg2_pins
-					&rg2mdio_pins>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
deleted file mode 100644
index 3ee61251a16d..000000000000
--- a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
+++ /dev/null
@@ -1,83 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-// Copyright 2021 Jonathan Neuschäfer
-
-/dts-v1/;
-
-/* The last 16 MiB are dedicated to the GPU */
-/memreserve/ 0x07000000 0x01000000;
-
-#include "nuvoton-wpcm450.dtsi"
-
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Supermicro X9SCi-LN4F BMC";
-	compatible = "supermicro,x9sci-ln4f-bmc", "nuvoton,wpcm450";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x08000000>; /* 128 MiB */
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&key_pins>;
-
-		uid {
-			label = "UID button";
-			linux,code = <KEY_HOME>;
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		uid {
-			label = "UID";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		heartbeat {
-			label = "heartbeat";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pinctrl {
-	key_pins: mux-keys {
-		groups = "gspi", "sspi";
-		function = "gpio";
-	};
-
-	led_pins: mux-leds {
-		groups = "hg3", "hg0", "pwm4";
-		function = "gpio";
-	};
-};
-
-&serial0 {
-	/*
-	 * Debug serial port. TX is exposed on the right pad of unpopulated
-	 * resistor R1247, RX on the right pad of R1162.
-	 */
-	status = "okay";
-};
-
-&serial1 {
-	/* "Serial over LAN" port. Connected to ttyS2 of the host system. */
-	status = "okay";
-};
-
-&watchdog0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/nuvoton/Makefile b/arch/arm/boot/dts/nuvoton/Makefile
new file mode 100644
index 000000000000..89c157dad312
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_NPCM7XX) += \
+	nuvoton-npcm730-gsj.dtb \
+	nuvoton-npcm730-gbs.dtb \
+	nuvoton-npcm730-kudo.dtb \
+	nuvoton-npcm750-evb.dtb \
+	nuvoton-npcm750-runbmc-olympus.dtb
+dtb-$(CONFIG_ARCH_WPCM450) += \
+	nuvoton-wpcm450-supermicro-x9sci-ln4f.dtb
diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
index c7b5ef15b716..98c35771534e 100644
--- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
@@ -99,6 +99,11 @@
 		};
 	};
 
+	udc0_phy: usb-phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
 	ahb {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -122,7 +127,14 @@
 			clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
 		};
 
-		gmac0: eth@f0802000 {
+		mc: memory-controller@f0824000 {
+			compatible = "nuvoton,npcm750-memory-controller";
+			reg = <0xf0824000 0x1000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		gmac0: ethernet@f0802000 {
 			device_type = "network";
 			compatible = "snps,dwmac";
 			reg = <0xf0802000 0x2000>;
@@ -137,6 +149,29 @@
 			status = "disabled";
 		};
 
+		sdmmc: mmc@f0842000 {
+			compatible = "nuvoton,npcm750-sdhci";
+			status = "disabled";
+			reg = <0xf0842000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks =  <&clk NPCM7XX_CLK_AHB>;
+			clock-names = "clk_mmc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc8_pins
+					&mmc_pins>;
+		};
+
+		sdhci: mmc@f0840000 {
+			compatible = "nuvoton,npcm750-sdhci";
+			status = "disabled";
+			reg = <0xf0840000 0x200>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks =  <&clk NPCM7XX_CLK_AHB>;
+			clock-names = "clk_sdhc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sd1_pins>;
+		};
+
 		ehci1: usb@f0806000 {
 			compatible = "nuvoton,npcm750-ehci";
 			reg = <0xf0806000 0x1000>;
@@ -144,6 +179,13 @@
 			status = "disabled";
 		};
 
+		ohci1: usb@f0807000 {
+			compatible = "generic-ohci";
+			reg = <0xf0807000 0x1000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		fiu0: spi@fb000000 {
 			compatible = "nuvoton,npcm750-fiu";
 			#address-cells = <1>;
@@ -179,6 +221,72 @@
 			status = "disabled";
 		};
 
+		udc5: usb@f0835000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0835000 0x1000
+			       0xfffd2800 0x800>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc6: usb@f0836000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0836000 0x1000
+			       0xfffd3000 0x800>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc7: usb@f0837000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0837000 0x1000
+			       0xfffd3800 0x800>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc8: usb@f0838000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0838000 0x1000
+			       0xfffd4000 0x800>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc9: usb@f0839000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0839000 0x1000
+			       0xfffd4800 0x800>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			nuvoton,sysgcr = <&gcr>;
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
 		apb {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -220,6 +328,15 @@
 				};
 			};
 
+			peci: peci-controller@f0100000 {
+				compatible = "nuvoton,npcm750-peci";
+				reg = <0xf0100000 0x200>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk NPCM7XX_CLK_APB3>;
+				cmd-timeout-ms = <1000>;
+				status = "disabled";
+			};
+
 			spi0: spi@200000 {
 				compatible = "nuvoton,npcm750-pspi";
 				reg = <0x200000 0x1000>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts
index d10669fcd527..231228842e63 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts
@@ -366,7 +366,7 @@
 		spi-max-frequency = <20000000>;
 		spi-rx-bus-width = <2>;
 		label = "bmc";
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -525,7 +525,7 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -661,12 +661,12 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	mb_fru@50 {
+	eeprom@50 {
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 	};
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -704,7 +704,7 @@
 				reg = <0x5d>;
 				status = "okay";
 			};
-			fan_fru@51 {
+			eeprom@51 {
 				compatible = "atmel,24c64";
 				reg = <0x51>;
 			};
@@ -714,7 +714,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
-			hsbp_fru@52 {
+			eeprom@52 {
 				compatible = "atmel,24c64";
 				reg = <0x52>;
 				status = "okay";
@@ -727,7 +727,7 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	i2c-switch@73 {
+	i2c-mux@73 {
 		compatible = "nxp,pca9545";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -763,7 +763,7 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	i2c-switch@72 {
+	i2c-mux@72 {
 		compatible = "nxp,pca9545";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -812,7 +812,7 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -866,7 +866,7 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9545";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -902,7 +902,7 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	i2c-switch@76 {
+	i2c-mux@76 {
 		compatible = "nxp,pca9545";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -961,7 +961,7 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9545";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1050,19 +1050,19 @@
 		"","","","SIO_POWER_GOOD","","","","";
 	};
 	gpio2: gpio@f0012000 {
-		bmc_usb_mux_oe_n {
+		bmc-usb-mux-oe-n-hog {
 			gpio-hog;
 			gpios = <25 GPIO_ACTIVE_HIGH>;
 			output-low;
 			line-name = "bmc-usb-mux-oe-n";
 		};
-		bmc_usb_mux_sel {
+		bmc-usb-mux-sel-hog {
 			gpio-hog;
 			gpios = <26 GPIO_ACTIVE_HIGH>;
 			output-low;
 			line-name = "bmc-usb-mux-sel";
 		};
-		bmc_usb2517_reset_n {
+		bmc-usb2517-reset-n-hog {
 			gpio-hog;
 			gpios = <27 GPIO_ACTIVE_LOW>;
 			output-low;
@@ -1070,19 +1070,19 @@
 		};
 	};
 	gpio3: gpio@f0013000 {
-		assert_cpu0_reset {
+		assert-cpu0-reset-hog {
 			gpio-hog;
 			gpios = <14 GPIO_ACTIVE_HIGH>;
 			output-low;
 			line-name = "assert-cpu0-reset";
 		};
-		assert_pwrok_cpu0_n {
+		assert-pwrok-cpu0-n-hog {
 			gpio-hog;
 			gpios = <15 GPIO_ACTIVE_HIGH>;
 			output-low;
 			line-name = "assert-pwrok-cpu0-n";
 		};
-		assert_cpu0_prochot {
+		assert-cpu0-prochot-hog {
 			gpio-hog;
 			gpios = <16 GPIO_ACTIVE_HIGH>;
 			output-low;
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj-gpio.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj-gpio.dtsi
index 53cfd15fa03f..53cfd15fa03f 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-gsj-gpio.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj-gpio.dtsi
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj.dts
index 491606c4f044..cd7843339c24 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj.dts
@@ -142,11 +142,11 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			bmc@0{
+			bmc@0 {
 				label = "bmc";
 				reg = <0x000000 0x2000000>;
 			};
@@ -155,7 +155,7 @@
 				reg = <0x0000000 0x80000>;
 				read-only;
 			};
-			u-boot-env@100000{
+			u-boot-env@100000 {
 				label = "u-boot-env";
 				reg = <0x00100000 0x40000>;
 			};
@@ -303,7 +303,7 @@
 &i2c15 {
 	status = "okay";
 
-	i2c-switch@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
index a0c2d7652625..886a87dfcd0d 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
@@ -388,7 +388,7 @@
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
 		label = "bmc";
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -397,7 +397,7 @@
 				reg = <0x0000000 0xC0000>;
 				read-only;
 			};
-			u-boot-env@100000{
+			u-boot-env@100000 {
 				label = "u-boot-env";
 				reg = <0x00100000 0x40000>;
 			};
@@ -422,7 +422,7 @@
 		reg = <1>;
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
-		partitions@88000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -447,7 +447,7 @@
 		reg = <0>;
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -494,7 +494,7 @@
 
 &i2c1 {
 	status = "okay";
-	i2c-switch@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -525,62 +525,62 @@
 			};
 		};
 
-		i2c-bus@4 {
+		i2c@4 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
 
 			// INLET1_T
-			lm75@5c {
-				compatible = "ti,lm75";
+			temperature-sensor@5c {
+				compatible = "national,lm75";
 				reg = <0x5c>;
 			};
 		};
 
-		i2c-bus@5 {
+		i2c@5 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
 
 			// OUTLET1_T
-			lm75@5c {
-				compatible = "ti,lm75";
+			temperature-sensor@5c {
+				compatible = "national,lm75";
 				reg = <0x5c>;
 			};
 		};
 
-		i2c-bus@6 {
+		i2c@6 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <6>;
 
 			// OUTLET2_T
-			lm75@5c {
-				compatible = "ti,lm75";
+			temperature-sensor@5c {
+				compatible = "national,lm75";
 				reg = <0x5c>;
 			};
 		};
 
-		i2c-bus@7 {
+		i2c@7 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <7>;
 
 			// OUTLET3_T
-			lm75@5c {
-				compatible = "ti,lm75";
+			temperature-sensor@5c {
+				compatible = "national,lm75";
 				reg = <0x5c>;
 			};
 		};
 	};
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x77>;
 		i2c-mux-idle-disconnect;
 
-		i2c-bus@2 {
+		i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
@@ -613,14 +613,14 @@
 
 &i2c4 {
 	status = "okay";
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x77>;
 		i2c-mux-idle-disconnect;
 
-		i2c-bus@0 {
+		i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
@@ -632,7 +632,7 @@
 			};
 		};
 
-		i2c-bus@1 {
+		i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
@@ -684,56 +684,56 @@
 
 &i2c13 {
 	status = "okay";
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x77>;
 		i2c-mux-idle-disconnect;
 
-		i2c-bus@3 {
+		i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
 
 			// M2_ZONE_T
-			lm75@28 {
-				compatible = "ti,lm75";
+			temperature-sensor@28 {
+				compatible = "national,lm75";
 				reg = <0x28>;
 			};
 		};
 
-		i2c-bus@4 {
+		i2c@4 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
 
 			// BATT_ZONE_T
-			lm75@29 {
-				compatible = "ti,lm75";
+			temperature-sensor@29 {
+				compatible = "national,lm75";
 				reg = <0x29>;
 			};
 		};
 
-		i2c-bus@5 {
+		i2c@5 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
 
 			// NBM1_ZONE_T
-			lm75@28 {
-				compatible = "ti,lm75";
+			temperature-sensor@28 {
+				compatible = "national,lm75";
 				reg = <0x28>;
 			};
 		};
-		i2c-bus@6 {
+		i2c@6 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <6>;
 
 			// NBM2_ZONE_T
-			lm75@29 {
-				compatible = "ti,lm75";
+			temperature-sensor@29 {
+				compatible = "national,lm75";
 				reg = <0x29>;
 			};
 		};
diff --git a/arch/arm/boot/dts/nuvoton-npcm730.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730.dtsi
index 86ec12ec2b50..86ec12ec2b50 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730.dtsi
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts
index 3dad32834e5e..bcdcb30c7bf6 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts
@@ -74,7 +74,7 @@
 		spi-rx-bus-width = <2>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -135,7 +135,7 @@
 		spi-rx-bus-width = <2>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -198,7 +198,7 @@
 	clock-frequency = <100000>;
 	status = "okay";
 	lm75@48 {
-		compatible = "lm75";
+		compatible = "national,lm75";
 		reg = <0x48>;
 		status = "okay";
 	};
@@ -208,8 +208,8 @@
 &i2c1 {
 	clock-frequency = <100000>;
 	status = "okay";
-	lm75@48 {
-		compatible = "lm75";
+	temperature-sensor@48 {
+		compatible = "national,lm75";
 		reg = <0x48>;
 		status = "okay";
 	};
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-pincfg-evb.dtsi
index 3b3806274adf..3b3806274adf 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-pincfg-evb.dtsi
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi
index 230cb344b2e1..230cb344b2e1 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
index 132e702281fc..0c94e14d40e8 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
@@ -107,11 +107,11 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			bmc@0{
+			bmc@0 {
 				label = "bmc";
 				reg = <0x000000 0x2000000>;
 			};
@@ -120,7 +120,7 @@
 				reg = <0x0000000 0x80000>;
 				read-only;
 			};
-			u-boot-env@100000{
+			u-boot-env@100000 {
 				label = "u-boot-env";
 				reg = <0x00100000 0x40000>;
 			};
@@ -146,7 +146,7 @@
 		reg = <1>;
 		npcm,fiu-rx-bus-width = <2>;
 
-		partitions@88000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -173,7 +173,7 @@
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -208,81 +208,81 @@
 &i2c1 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x70>;
 		i2c-mux-idle-disconnect;
 
-		i2c_slot1a: i2c-bus@0 {
+		i2c_slot1a: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
 		};
 
-		i2c_slot1b: i2c-bus@1 {
+		i2c_slot1b: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
 		};
 
-		i2c_slot2a: i2c-bus@2 {
+		i2c_slot2a: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
 		};
 
-		i2c_slot2b: i2c-bus@3 {
+		i2c_slot2b: i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
 		};
 
-		i2c_slot3: i2c-bus@4 {
+		i2c_slot3: i2c@4 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
 		};
 
-		i2c_slot4: i2c-bus@5 {
+		i2c_slot4: i2c@5 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
 		};
 
-		i2c_slot5: i2c-bus@6 {
+		i2c_slot5: i2c@6 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <6>;
 		};
 	};
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		reg = <0x71>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		i2c-mux-idle-disconnect;
 
-		i2c_m2_s1: i2c-bus@0 {
+		i2c_m2_s1: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
 		};
 
-		i2c_m2_s2: i2c-bus@1 {
+		i2c_m2_s2: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
 		};
-		i2c_m2_s3: i2c-bus@2 {
+		i2c_m2_s3: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
 		};
 
-		i2c_m2_s4: i2c-bus@3 {
+		i2c_m2_s4: i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
@@ -427,91 +427,91 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		reset-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-		G1A_P0_0 {
+		g1a-p0-0-hog {
 			gpio-hog;
 			gpios = <0 0>;
 			output-high;
 			line-name = "TPM_BMC_ALERT_N";
 		};
-		G1A_P0_1 {
+		g1a-p0-1-hog {
 			gpio-hog;
 			gpios = <1 0>;
 			input;
 			line-name = "FM_BIOS_TOP_SWAP";
 		};
-		G1A_P0_2 {
+		g1a-p0-2-hog {
 			gpio-hog;
 			gpios = <2 0>;
 			input;
 			line-name = "FM_BIOS_PREFRB2_GOOD";
 		};
-		G1A_P0_3 {
+		g1a-p0-3-hog {
 			gpio-hog;
 			gpios = <3 0>;
 			input;
 			line-name = "BMC_SATAXPCIE_0TO3_SEL";
 		};
-		G1A_P0_4 {
+		g1a-p0-4-hog {
 			gpio-hog;
 			gpios = <4 0>;
 			input;
 			line-name = "BMC_SATAXPCIE_4TO7_SEL";
 		};
-		G1A_P0_5 {
+		g1a-p0-5-hog {
 			gpio-hog;
 			gpios = <5 0>;
 			output-low;
 			line-name = "FM_UV_ADR_TRIGGER_EN_N";
 		};
-		G1A_P0_6 {
+		g1a-p0-6-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			input;
 			line-name = "RM_THROTTLE_EN_N";
 		};
-		G1A_P1_0 {
+		g1a-p1-0-hog {
 			gpio-hog;
 			gpios = <8 0>;
 			input;
 			line-name = "FM_BMC_TPM_PRES_N";
 		};
-		G1A_P1_1 {
+		g1a-p1-1-hog {
 			gpio-hog;
 			gpios = <9 0>;
 			input;
 			line-name = "FM_CPU0_SKTOCC_LVT3_N";
 		};
-		G1A_P1_2 {
+		g1a-p1-2-hog {
 			gpio-hog;
 			gpios = <10 0>;
 			input;
 			line-name = "FM_CPU1_SKTOCC_LVT3_N";
 		};
-		G1A_P1_3 {
+		g1a-p1-3-hog {
 			gpio-hog;
 			gpios = <11 0>;
 			input;
 			line-name = "PSU1_ALERT_N";
 		};
-		G1A_P1_4 {
+		g1a-p1-4-hog {
 			gpio-hog;
 			gpios = <12 0>;
 			input;
 			line-name = "PSU2_ALERT_N";
 		};
-		G1A_P1_5 {
+		g1a-p1-5-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			input;
 			line-name = "H_CPU0_FAST_WAKE_LVT3_N";
 		};
-		G1A_P1_6 {
+		g1a-p1-6-hog {
 			gpio-hog;
 			gpios = <14 0>;
 			output-high;
 			line-name = "I2C_MUX1_RESET_N";
 		};
-		G1A_P1_7 {
+		g1a-p1-7-hog {
 			gpio-hog;
 			gpios = <15 0>;
 			input;
@@ -524,91 +524,91 @@
 		reg = <0x75>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		G1B_P0_0 {
+		g1b-p0-0-hog {
 			gpio-hog;
 			gpios = <0 0>;
 			input;
 			line-name = "PVDDQ_ABC_PINALERT_N";
 		};
-		G1B_P0_1 {
+		g1b-p0-1-hog {
 			gpio-hog;
 			gpios = <1 0>;
 			input;
 			line-name = "PVDDQ_DEF_PINALERT_N";
 		};
-		G1B_P0_2 {
+		g1b-p0-2-hog {
 			gpio-hog;
 			gpios = <2 0>;
 			input;
 			line-name = "PVDDQ_GHJ_PINALERT_N";
 		};
-		G1B_P0_3 {
+		g1b-p0-3-hog {
 			gpio-hog;
 			gpios = <3 0>;
 			input;
 			line-name = "PVDDQ_KLM_PINALERT_N";
 		};
-		G1B_P0_5 {
+		g1b-p0-5-hog {
 			gpio-hog;
 			gpios = <5 0>;
 			input;
 			line-name = "FM_BOARD_REV_ID0";
 		};
-		G1B_P0_6 {
+		g1b-p0-6-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			input;
 			line-name = "FM_BOARD_REV_ID1";
 		};
-		G1B_P0_7 {
+		g1b-p0-7-hog {
 			gpio-hog;
 			gpios = <7 0>;
 			input;
 			line-name = "FM_BOARD_REV_ID2";
 		};
-		G1B_P1_0 {
+		g1b-p1-0-hog {
 			gpio-hog;
 			gpios = <8 0>;
 			input;
 			line-name = "FM_OC_DETECT_EN_N";
 		};
-		G1B_P1_1 {
+		g1b-p1-1-hog {
 			gpio-hog;
 			gpios = <9 0>;
 			input;
 			line-name = "FM_FLASH_DESC_OVERRIDE";
 		};
-		G1B_P1_2 {
+		g1b-p1-2-hog {
 			gpio-hog;
 			gpios = <10 0>;
 			output-low;
 			line-name = "FP_PWR_ID_LED_N";
 		};
-		G1B_P1_3 {
+		g1b-p1-3-hog {
 			gpio-hog;
 			gpios = <11 0>;
 			output-low;
 			line-name = "BMC_LED_PWR_GRN";
 		};
-		G1B_P1_4 {
+		g1b-p1-4-hog {
 			gpio-hog;
 			gpios = <12 0>;
 			output-low;
 			line-name = "BMC_LED_PWR_AMBER";
 		};
-		G1B_P1_5 {
+		g1b-p1-5-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			output-high;
 			line-name = "FM_BMC_FAULT_LED_N";
 		};
-		G1B_P1_6 {
+		g1b-p1-6-hog {
 			gpio-hog;
 			gpios = <14 0>;
 			output-high;
 			line-name = "FM_CPLD_BMC_PWRDN_N";
 		};
-		G1B_P1_7 {
+		g1b-p1-7-hog {
 			gpio-hog;
 			gpios = <15 0>;
 			output-high;
@@ -626,91 +626,91 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		reset-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
-		G2A_P0_0 {
+		g2a-p0-0-hog {
 			gpio-hog;
 			gpios = <0 0>;
 			output-high;
 			line-name = "BMC_PON_RST_REQ_N";
 		};
-		G2A_P0_1 {
+		g2a-p0-1-hog {
 			gpio-hog;
 			gpios = <1 0>;
 			output-high;
 			line-name = "BMC_RST_IND_REQ_N";
 		};
-		G2A_P0_2 {
+		g2a-p0-2-hog {
 			gpio-hog;
 			gpios = <2 0>;
 			input;
 			line-name = "RST_BMC_RTCRST";
 		};
-		G2A_P0_3 {
+		g2a-p0-3-hog {
 			gpio-hog;
 			gpios = <3 0>;
 			output-high;
 			line-name = "FM_BMC_PWRBTN_OUT_N";
 		};
-		G2A_P0_4 {
+		g2a-p0-4-hog {
 			gpio-hog;
 			gpios = <4 0>;
 			output-high;
 			line-name = "RST_BMC_SYSRST_BTN_OUT_N";
 		};
-		G2A_P0_5 {
+		g2a-p0-5-hog {
 			gpio-hog;
 			gpios = <5 0>;
 			output-high;
 			line-name = "FM_BATTERY_SENSE_EN_N";
 		};
-		G2A_P0_6 {
+		g2a-p0-6-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			output-high;
 			line-name = "FM_BMC_READY_N";
 		};
-		G2A_P0_7 {
+		g2a-p0-7-hog {
 			gpio-hog;
 			gpios = <7 0>;
 			input;
 			line-name = "IRQ_BMC_PCH_SMI_LPC_N";
 		};
-		G2A_P1_0 {
+		g2a-p1-0-hog {
 			gpio-hog;
 			gpios = <8 0>;
 			input;
 			line-name = "FM_SLOT4_CFG0";
 		};
-		G2A_P1_1 {
+		g2a-p1-1-hog {
 			gpio-hog;
 			gpios = <9 0>;
 			input;
 			line-name = "FM_SLOT4_CFG1";
 		};
-		G2A_P1_2 {
+		g2a-p1-2-hog {
 			gpio-hog;
 			gpios = <10 0>;
 			input;
 			line-name = "FM_NVDIMM_EVENT_N";
 		};
-		G2A_P1_3 {
+		g2a-p1-3-hog {
 			gpio-hog;
 			gpios = <11 0>;
 			input;
 			line-name = "PSU1_BLADE_EN_N";
 		};
-		G2A_P1_4 {
+		g2a-p1-4-hog {
 			gpio-hog;
 			gpios = <12 0>;
 			input;
 			line-name = "BMC_PCH_FNM";
 		};
-		G2A_P1_5 {
+		g2a-p1-5-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			input;
 			line-name = "FM_SOL_UART_CH_SEL";
 		};
-		G2A_P1_6 {
+		g2a-p1-6-hog {
 			gpio-hog;
 			gpios = <14 0>;
 			input;
@@ -723,91 +723,91 @@
 		reg = <0x75>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		G2B_P0_0 {
+		g2b-p0-0-hog {
 			gpio-hog;
 			gpios = <0 0>;
 			input;
 			line-name = "FM_CPU_MSMI_LVT3_N";
 		};
-		G2B_P0_1 {
+		g2b-p0-1-hog {
 			gpio-hog;
 			gpios = <1 0>;
 			input;
 			line-name = "FM_BIOS_MRC_DEBUG_MSG_DIS";
 		};
-		G2B_P0_2 {
+		g2b-p0-2-hog {
 			gpio-hog;
 			gpios = <2 0>;
 			input;
 			line-name = "FM_CPU1_DISABLE_BMC_N";
 		};
-		G2B_P0_3 {
+		g2b-p0-3-hog {
 			gpio-hog;
 			gpios = <3 0>;
 			output-low;
 			line-name = "BMC_JTAG_SELECT";
 		};
-		G2B_P0_4 {
+		g2b-p0-4-hog {
 			gpio-hog;
 			gpios = <4 0>;
 			output-high;
 			line-name = "PECI_MUX_SELECT";
 		};
-		G2B_P0_5 {
+		g2b-p0-5-hog {
 			gpio-hog;
 			gpios = <5 0>;
 			output-high;
 			line-name = "I2C_MUX2_RESET_N";
 		};
-		G2B_P0_6 {
+		g2b-p0-6-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			input;
 			line-name = "FM_BMC_CPLD_PSU2_ON";
 		};
-		G2B_P0_7 {
+		g2b-p0-7-hog {
 			gpio-hog;
 			gpios = <7 0>;
 			output-high;
 			line-name = "PSU2_ALERT_EN_N";
 		};
-		G2B_P1_0 {
+		g2b-p1-0-hog {
 			gpio-hog;
 			gpios = <8 0>;
 			output-high;
 			line-name = "FM_CPU_BMC_INIT";
 		};
-		G2B_P1_1 {
+		g2b-p1-1-hog {
 			gpio-hog;
 			gpios = <9 0>;
 			output-high;
 			line-name = "IRQ_BMC_PCH_SCI_LPC_N";
 		};
-		G2B_P1_2 {
+		g2b-p1-2-hog {
 			gpio-hog;
 			gpios = <10 0>;
 			output-low;
 			line-name = "PMB_ALERT_EN_N";
 		};
-		G2B_P1_3 {
+		g2b-p1-3-hog {
 			gpio-hog;
 			gpios = <11 0>;
 			output-high;
 			line-name = "FM_FAST_PROCHOT_EN_N";
 		};
-		G2B_P1_4 {
+		g2b-p1-4-hog {
 			gpio-hog;
 			gpios = <12 0>;
 			output-high;
 			line-name = "BMC_NVDIMM_PRSNT_N";
 		};
-		G2B_P1_5 {
+		g2b-p1-5-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			output-low;
 			line-name = "FM_BACKUP_BIOS_SEL_H_BMC";
 		};
-		G2B_P1_6 {
+		g2b-p1-6-hog {
 			gpio-hog;
 			gpios = <14 0>;
 			output-high;
@@ -824,7 +824,7 @@
 		reg = <0x4a>;
 		status = "okay";
 	};
-	m24128_fru@51 {
+	eeprom@51 {
 		compatible = "atmel,24c128";
 		reg = <0x51>;
 		pagesize = <64>;
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
new file mode 100644
index 000000000000..65fe3a180bb1
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com
+// Copyright 2018 Google, Inc.
+
+#include "nuvoton-common-npcm7xx.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "nuvoton,npcm750-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			clocks = <&clk NPCM7XX_CLK_CPU>;
+			clock-names = "clk_cpu";
+			reg = <0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			clocks = <&clk NPCM7XX_CLK_CPU>;
+			clock-names = "clk_cpu";
+			reg = <1>;
+			next-level-cache = <&l2>;
+		};
+	};
+
+	soc {
+		timer@3fe600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x3fe600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&clk NPCM7XX_CLK_AHB>;
+		};
+	};
+
+	ahb {
+		gmac1: ethernet@f0804000 {
+			device_type = "network";
+			compatible = "snps,dwmac";
+			reg = <0xf0804000 0x2000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			ethernet = <1>;
+			clocks = <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>;
+			clock-names = "stmmaceth", "clk_gmac";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rg2_pins
+					&rg2mdio_pins>;
+			status = "disabled";
+		};
+
+		udc0: usb@f0830000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0830000 0x1000
+			       0xfffd0000 0x800>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc1: usb@f0831000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0831000 0x1000
+			       0xfffd0800 0x800>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc2: usb@f0832000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0832000 0x1000
+			       0xfffd1000 0x800>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc3: usb@f0833000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0833000 0x1000
+			       0xfffd1800 0x800>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc4: usb@f0834000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0834000 0x1000
+			       0xfffd2000 0x800>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
new file mode 100644
index 000000000000..edb907f740bf
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+// Copyright 2021 Jonathan Neuschäfer
+
+/dts-v1/;
+
+/* The last 16 MiB are dedicated to the GPU */
+/memreserve/ 0x07000000 0x01000000;
+
+#include "nuvoton-wpcm450.dtsi"
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Supermicro X9SCi-LN4F BMC";
+	compatible = "supermicro,x9sci-ln4f-bmc", "nuvoton,wpcm450";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x08000000>; /* 128 MiB */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins>;
+
+		button-uid {
+			label = "UID button";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led-uid {
+			label = "UID";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-heartbeat {
+			label = "heartbeat";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fiu {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+		/* 0 */ "", "host-reset-control-n", "", "", "", "", "", "",
+		/* 8 */ "", "", "", "", "power-chassis-control-n", "", "uid-button", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* 0 */ "", "", "", "", "led-heartbeat", "", "", "led-uid",
+		/* 8 */ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		/* 0 */ "", "", "", "", "", "", "", "",
+		/* 8 */ "", "", "", "", "", "", "", "power-chassis-good";
+};
+
+&pinctrl {
+	key_pins: mux-keys {
+		groups = "gspi", "sspi";
+		function = "gpio";
+	};
+
+	led_pins: mux-leds {
+		groups = "hg3", "hg0", "pwm4";
+		function = "gpio";
+	};
+};
+
+&serial0 {
+	/*
+	 * Debug serial port. TX is exposed on the right pad of unpopulated
+	 * resistor R1247, RX on the right pad of R1162.
+	 */
+	status = "okay";
+};
+
+&serial1 {
+	/* "Serial over LAN" port. Connected to ttyS2 of the host system. */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
index 93595850a4c3..6e1f0f164cb4 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
@@ -37,6 +37,14 @@
 		#clock-cells = <0>;
 	};
 
+	refclk: clock-48mhz {
+		/* 48 MHz reference oscillator */
+		compatible = "fixed-clock";
+		clock-output-names = "ref";
+		clock-frequency = <48000000>;
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -49,6 +57,15 @@
 			reg = <0xb0000000 0x200>;
 		};
 
+		clk: clock-controller@b0000200 {
+			compatible = "nuvoton,wpcm450-clk";
+			reg = <0xb0000200 0x100>;
+			clocks = <&refclk>;
+			clock-names = "ref";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		serial0: serial@b8000000 {
 			compatible = "nuvoton,wpcm450-uart";
 			reg = <0xb8000000 0x20>;
@@ -81,7 +98,6 @@
 			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0xb800101c 0x4>;
 			clocks = <&clk24m>;
-			status = "disabled";
 		};
 
 		aic: interrupt-controller@b8002000 {
@@ -104,6 +120,7 @@
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
 					     <3 IRQ_TYPE_LEVEL_HIGH>,
 					     <4 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 			};
 
@@ -112,6 +129,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 			};
 
@@ -456,5 +474,22 @@
 				function = "hg7";
 			};
 		};
+
+		fiu: spi-controller@c8000000 {
+			compatible = "nuvoton,wpcm450-fiu";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xc8000000 0x1000>, <0xc0000000 0x4000000>;
+			reg-names = "control", "memory";
+			clocks = <&clk 0>;
+			nuvoton,shm = <&shm>;
+			status = "disabled";
+		};
+
+		shm: syscon@c8001000 {
+			compatible = "nuvoton,wpcm450-shm", "syscon";
+			reg = <0xc8001000 0x1000>;
+			reg-io-width = <1>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/nvidia/Makefile b/arch/arm/boot/dts/nvidia/Makefile
new file mode 100644
index 000000000000..2ed2d923c8f9
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/Makefile
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
+	tegra114-asus-tf701t.dtb \
+	tegra114-dalmore.dtb \
+	tegra114-roth.dtb \
+	tegra114-tn7.dtb
+dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
+	tegra124-apalis-eval.dtb \
+	tegra124-apalis-v1.2-eval.dtb \
+	tegra124-jetson-tk1.dtb \
+	tegra124-nyan-big.dtb \
+	tegra124-nyan-big-fhd.dtb \
+	tegra124-nyan-blaze.dtb \
+	tegra124-venice2.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
+	tegra20-acer-a500-picasso.dtb \
+	tegra20-asus-sl101.dtb \
+	tegra20-asus-tf101.dtb \
+	tegra20-harmony.dtb \
+	tegra20-colibri-eval-v3.dtb \
+	tegra20-colibri-iris.dtb \
+	tegra20-medcom-wide.dtb \
+	tegra20-paz00.dtb \
+	tegra20-plutux.dtb \
+	tegra20-seaboard.dtb \
+	tegra20-tec.dtb \
+	tegra20-trimslice.dtb \
+	tegra20-ventana.dtb
+dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
+	tegra30-apalis-eval.dtb \
+	tegra30-apalis-v1.1-eval.dtb \
+	tegra30-asus-nexus7-grouper-PM269.dtb \
+	tegra30-asus-nexus7-grouper-E1565.dtb \
+	tegra30-asus-nexus7-tilapia-E1565.dtb \
+	tegra30-asus-p1801-t.dtb \
+	tegra30-asus-tf201.dtb \
+	tegra30-asus-tf300t.dtb \
+	tegra30-asus-tf300tg.dtb \
+	tegra30-asus-tf300tl.dtb \
+	tegra30-asus-tf600t.dtb \
+	tegra30-asus-tf700t.dtb \
+	tegra30-beaver.dtb \
+	tegra30-cardhu-a02.dtb \
+	tegra30-cardhu-a04.dtb \
+	tegra30-colibri-eval-v3.dtb \
+	tegra30-lg-p880.dtb \
+	tegra30-lg-p895.dtb \
+	tegra30-ouya.dtb \
+	tegra30-pegatron-chagall.dtb
diff --git a/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts b/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts
new file mode 100644
index 000000000000..f02e2cf65fe8
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts
@@ -0,0 +1,1963 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+
+#include "tegra114.dtsi"
+
+/ {
+	model = "Asus Transformer Pad TF701T";
+	compatible = "asus,tf701t", "nvidia,tegra114";
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = "/mmc@78000600"; /* eMMC */
+		mmc1 = "/mmc@78000400"; /* uSD slot */
+		mmc2 = "/mmc@78000000"; /* WiFi */
+
+		rtc0 = &palmas;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd; /* Console */
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;
+			linux,cma-default;
+			reusable;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;
+			no-map;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&hdmi_5v0_sys>;
+			pll-supply = <&avdd_hdmi_pll>;
+			vdd-supply = <&avdd_hdmi>;
+
+			port {
+				hdmi_out: endpoint {
+					remote-endpoint = <&connector_in>;
+				};
+			};
+		};
+
+		dsi@54300000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&avdd_dsi_csi>;
+
+			nvidia,ganged-mode = <&dsib>;
+
+			panel_primary: panel@0 {
+				compatible = "sharp,lq101r1sx01";
+				reg = <0>;
+
+				link2 = <&panel_secondary>;
+
+				power-supply = <&dvdd_1v8_lcd>;
+				backlight = <&backlight>;
+			};
+		};
+
+		dsi@54400000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&avdd_dsi_csi>;
+
+			panel_secondary: panel@0 {
+				compatible = "sharp,lq101r1sx01";
+				reg = <0>;
+			};
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA114_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* WLAN SDIO pinmux */
+			sdmmc1-clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1-cmd {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			wlan-power {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			wlan-reset {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			wlan-host-wake {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			wlan-3v3-com {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-A pinmux */
+			uarta-cts {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uarta-rts {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GNSS UART-B pinmux */
+			uartb-cts {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uartb-rts {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uartb-rxd {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uartb-txd {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Bluetooth UART-C pinmux */
+			uartc-cts-rxd {
+				nvidia,pins = "uart3_cts_n_pa1",
+					      "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uartc-rts-txd {
+				nvidia,pins = "uart3_rts_n_pc0",
+					      "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			bt-shutdown {
+				nvidia,pins = "kb_col6_pq6",
+					      "kb_col7_pq7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			bt-dev-wake {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			bt-host-wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			bt-pcm-dap4-out {
+				nvidia,pins = "dap4_fs_pp4",
+					      "dap4_dout_pp6",
+					      "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			bt-pcm-dap4-in {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-D pinmux */
+			uartd-cts {
+				nvidia,pins = "gmi_a17_pb0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uartd-rts {
+				nvidia,pins = "gmi_a16_pj7",
+					      "gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* MicroSD pinmux */
+			sdmmc3-clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3-data {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "kb_col4_pq4",
+					      "sdmmc3_cd_n_pv2",
+					      "sdmmc3_clk_lb_out_pee4",
+					      "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			microsd-pwr {
+				nvidia,pins = "gmi_clk_pk1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* EMMC pinmux */
+			sdmmc4-clk-cmd {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4-data {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+					      "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2C pinmux */
+			gen1-i2c {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+
+			gen2-i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam-i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			
+			ddc-i2c {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwr-i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SPI pinmux */
+			spi1-out {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1-in {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2 {
+				nvidia,pins = "ulpi_data4_po5",
+					      "ulpi_data7_po0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi4-out {
+				nvidia,pins = "gmi_ad6_pg6",
+					      "gmi_wr_n_pi0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi4-in {
+				nvidia,pins = "gmi_ad5_pg5",
+					      "gmi_ad7_pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO keys pinmux */
+			hall-switch {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lineout-switch {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			power-key {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			volume-keys {
+				nvidia,pins = "kb_row1_pr1",
+					      "kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			nct-irq {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			mpu-irq {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* HDMI pinmux */
+			hdmi-hpd {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			hdmi-en {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			hdmi-cec {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* LED pinmux */
+			backlight-pwm {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			backlight-en {
+				nvidia,pins = "gmi_ad10_ph2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Touchscreen pinmux */
+			touch-irq {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			touch-rst {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			touch-pwr {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			touch-vio {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* AUDIO pinmux */
+			audio-ldo1 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			hp-detect {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap-i2s0-in {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap-i2s0-out {
+				nvidia,pins = "dap1_dout_pn2",
+					      "dap1_fs_pn0",
+					      "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap-i2s1-in {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap-i2s1-out {
+				nvidia,pins = "dap2_dout_pa5",
+					      "dap2_fs_pa2",
+					      "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap-i2s2-in {
+				nvidia,pins = "dap3_fs_pp0",
+					      "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap-i2s2-out {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif-in {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif-out {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* AsusEC pinmux */
+			ec-irq {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ec-req {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			hotplug-i2c {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ps2-irq {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kbd-irq {
+				nvidia,pins = "gmi_cs0_n_pj0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dvfs-pin {
+				nvidia,pins = "dvfs_pwm_px0",
+					      "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Core pinmux */
+			clk-32k-out {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sys-clk-req {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			core-pwr-req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cpu-pwr-req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwr-int-n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk-32k-in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			reset-out-n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* ULPI pinmux */
+			ulpi-data0-6 {
+				nvidia,pins = "ulpi_data0_po1",
+					      "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi-data1-5 {
+				nvidia,pins = "ulpi_data1_po2",
+					      "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi-data2-3 {
+				nvidia,pins = "ulpi_data2_po3",
+					      "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PORT V */
+			pv0-gpio {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv1-gpio {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PORT U */
+			pu0-gpio {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu2-gpio {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PWM pinmux */
+			pwm0 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwm1 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* EXTPERIPH pinmux */
+			clk1-out {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk2-out {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3-out {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1-req {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GMI pinmux */
+			gmi-wp-n {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-adv {
+				nvidia,pins = "gmi_adv_n_pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-ad0-ad1 {
+				nvidia,pins = "gmi_ad0_pg0",
+					      "gmi_ad1_pg1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi-ad2-ad3 {
+				nvidia,pins = "gmi_ad2_pg2",
+					      "gmi_ad3_pg3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-iordy {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-a18 {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-wait {
+				nvidia,pins = "gmi_wait_pi7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi-cs6-n {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi-cs7-n {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-dqs-p {
+				nvidia,pins = "gmi_dqs_p_pj3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-cs2-ad {
+				nvidia,pins = "gmi_cs2_n_pk3",
+					      "gmi_ad14_ph6",
+					      "gmi_ad15_ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-cs4-clk {
+				nvidia,pins = "gmi_cs4_n_pk2",
+					      "gmi_clk_lb";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-ad11 {
+				nvidia,pins = "gmi_ad11_ph3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi-cs1-oe {
+				nvidia,pins = "gmi_cs1_n_pj2",
+					      "gmi_oe_n_pi1";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-ad4 {
+				nvidia,pins = "gmi_ad4_pg4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-ad13 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-rst-n {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PORT CC */
+			pcc-gpio {
+				nvidia,pins = "pcc1", "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PORT BB */
+			pbb3-gpio {
+				nvidia,pins = "pbb3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb4-5-6-gpio {
+				nvidia,pins = "pbb4", "pbb5", "pbb6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb7-gpio {
+				nvidia,pins = "pbb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* KBC pinmux */
+			kb-r0-c1 {
+				nvidia,pins = "kb_row0_pr0",
+					      "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb-row4 {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb-row5 {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb-row6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb-r8-c3 {
+				nvidia,pins = "kb_row8_ps0",
+					      "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* VI pinmux */
+			cam-mclk {
+				nvidia,pins = "cam_mclk_pcc0",
+					      "pbb0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* AUD pinmux */
+			gpio-x4-aud {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gpio-x1-aud {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gpio-x3-aud {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gpio-x6-aud {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			usb-vbus {
+				nvidia,pins = "usb_vbus_en0_pn4",
+					      "usb_vbus_en1_pn5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive-sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
+			};
+
+			drive-sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <22>;
+				nvidia,pull-up-strength = <36>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive-gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <2>;
+				nvidia,pull-up-strength = <2>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		/* GPS */
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		bluetooth {
+			compatible = "brcm,bcm4334-bt";
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(EE, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+			reset-gpios = <&gpio TEGRA_GPIO(Q, 6) GPIO_ACTIVE_LOW>;
+
+			vbat-supply = <&vdd_3v3_com>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		magnetometer@c {
+			compatible = "asahi-kasei,ak09911";
+			reg = <0xc>;
+
+			/* no DRDY (polling) */
+
+			vdd-supply = <&vdd_2v85_sen>;
+			vid-supply = <&vdd_1v8_vio>;
+
+			mount-matrix =  "0",  "1", "0",
+					"1",  "0", "0",
+					"0",  "0","-1";
+		};
+
+		rt5639: audio-codec@1c {
+			compatible = "realtek,rt5639";
+			reg = <0x1c>;
+
+			realtek,ldo1-en-gpios =
+				<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			clock-names = "mclk";
+		};
+
+		temp_sensor: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_1v8_vio>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		motion-tracker@68 {
+			compatible = "invensense,mpu6500";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(R, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			vdd-supply = <&vdd_2v85_sen>;
+			vddio-supply = <&vdd_1v8_vio>;
+
+			mount-matrix =  "0", "-1", "0",
+					"1",  "0", "0",
+					"0",  "0", "1";
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		power-sensor@44 {
+			compatible = "ti,ina230";
+			reg = <0x44>;
+
+			shunt-resistor = <5000>;
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		light-sensor@1c {
+			compatible = "dynaimage,al3320a";
+			reg = <0x1c>;
+
+			vdd-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <10000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		palmas: pmic@58 {
+			compatible = "ti,tps65913", "ti,palmas";
+			reg = <0x58>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpadc: adc {
+				compatible = "ti,palmas-gpadc";
+				interrupts = <18 IRQ_TYPE_NONE>,
+					     <16 IRQ_TYPE_NONE>,
+					     <17 IRQ_TYPE_NONE>;
+
+				ti,channel0-current-microamp = <5>;
+				ti,channel3-current-microamp = <400>;
+				ti,enable-extended-delay;
+
+				#io-channel-cells = <1>;
+			};
+
+			palmas_extcon: extcon {
+				compatible = "ti,palmas-usb-vid";
+				ti,enable-vbus-detection;
+				ti,enable-id-detection;
+			};
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			palmas_clk32kg@0 {
+				compatible = "ti,palmas-clk32kg";
+				#clock-cells = <0>;
+			};
+
+			pinmux {
+				compatible = "ti,tps65913-pinctrl";
+				ti,palmas-enable-dvfs1;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&palmas_default>;
+
+				palmas_default: pinmux {
+					pin_gpio0 {
+						pins = "gpio0";
+						function = "gpio";
+					};
+
+					pin_gpio1 {
+						pins = "gpio1";
+						function = "gpio";
+					};
+
+					pin_gpio2 {
+						pins = "gpio2";
+						function = "gpio";
+					};
+
+					pin_gpio3 {
+						pins = "gpio3";
+						function = "gpio";
+					};
+
+					pin_gpio4 {
+						pins = "gpio4";
+						function = "gpio";
+					};
+
+					pin_gpio5 {
+						pins = "gpio5";
+						function = "gpio";
+					};
+
+					pin_gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+					};
+
+					pin_gpio7 {
+						pins = "gpio7";
+						function = "gpio";
+					};
+
+					pin_powergood {
+						pins = "powergood";
+						function = "powergood";
+					};
+
+					pin_vac {
+						pins = "vac";
+						function = "vac";
+					};
+				};
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				ldo1-in-supply = <&vddio_ddr>;
+				ldo2-in-supply = <&vddio_ddr>;
+				ldo4-in-supply = <&vdd_1v8_vio>;
+				ldo5-in-supply = <&vcore_emmc>;
+				ldo6-in-supply = <&vcore_emmc>;
+				ldo7-in-supply = <&vcore_emmc>;
+				ldo9-in-supply = <&vcore_emmc>;
+				ldoln-in-supply = <&vdd_smps10_out2>;
+
+				regulators {
+					vdd_cpu: smps123 {
+						regulator-name = "vdd_cpu";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <1>;
+						ti,mode-sleep = <3>;
+					};
+
+					vdd_core: smps45 {
+						regulator-name = "vdd_core";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <3>;
+					};
+
+					/* smps6 disabled */
+
+					vddio_ddr: smps7 {
+						regulator-name = "vddio_ddr";
+						regulator-min-microvolt = <1350000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8_vio: smps8 {
+						regulator-name = "vdd_1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vcore_emmc: smps9 {
+						regulator-name = "vdd_emmc";
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-boot-on;
+					};
+
+					smps10_out1 {
+						regulator-name = "vd_smps10_out1";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_smps10_out2: smps10_out2 {
+						regulator-name = "vd_smps10_out2";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					avdd_hdmi_pll: ldo1 {
+						regulator-name = "avdd_hdmi_pll";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <3>;
+					};
+
+					avdd_dsi_csi: ldo2 {
+						regulator-name = "avdd_dsi_csi";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-boot-on;
+					};
+
+					ldo3 {
+						regulator-name = "vpp_fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					vdd_1v2_cam: ldo4 {
+						regulator-name = "vdd_1v2_cam";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					avdd_2v8_cam: ldo5 {
+						regulator-name = "avdd_cam2";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					vdd_2v85_sen: ldo6 {
+						regulator-name = "vdd_dev";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					avdd_2v8_af: ldo7 {
+						regulator-name = "avdd_2v8_cam";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo8 {
+						regulator-name = "vdd_rtc";
+						regulator-min-microvolt = <950000>;
+						regulator-max-microvolt = <950000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					vddio_usd: ldo9 {
+						regulator-name = "vddio_usd";
+						/* min voltage of 1.8v is not stable */
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <2900000>;
+					};
+
+					avdd_hdmi: ldoln {
+						regulator-name = "avdd_hdmi";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-boot-on;
+					};
+
+					avdd_usb: ldousb {
+						regulator-name = "avdd_usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-boot-on;
+					};
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 IRQ_TYPE_NONE>;
+			};
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <300>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <2000>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+
+		/* Clear DEV_ON bit in DEV_CTRL register of TPS65913 PMIC  */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x58>;
+			nvidia,reg-addr = <0xA0>;
+			nvidia,reg-data = <0x00>;
+		};
+	};
+
+	ahub@70080000 {
+		/* HIFI CODEC (i2s1) */
+		i2s@70080400 {
+			status = "okay";
+		};
+
+		/* BT SCO (i2s3) */
+		i2s@70080600 {
+			status = "okay";
+		};
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	/* WiFi */
+	mmc@78000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA114_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_P>;
+		assigned-clock-rates = <82000000>;
+
+		max-frequency = <82000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		sd-uhs-ddr50;
+		mmc-ddr-1_8v;
+
+		power-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+
+		nvidia,default-tap = <0x2>;
+		nvidia,default-trim = <0x2>;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_com>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 5) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	/* MicroSD card */
+	mmc@78000400 {
+		status = "okay";
+
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+
+		nvidia,default-tap = <0x3>;
+		nvidia,default-trim = <0x3>;
+
+		vmmc-supply = <&vdd_2v9_usd>;
+		vqmmc-supply = <&vddio_usd>;
+	};
+
+	/* eMMC */
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+
+		non-removable;
+		mmc-ddr-1_8v;
+
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	/* Peripheral USB via ASUS connector */
+	usb@7d000000 {
+		compatible = "nvidia,tegra114-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		vbus-supply = <&avdd_usb>;
+	};
+
+	/* Host USB via dock */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		power-supply = <&vdd_3v7_bl>;
+		pwms = <&pwm 1 1000000>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <224>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		hpd-gpios = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		ddc-i2c-bus = <&hdmi_ddc>;
+
+		port {
+			connector_in: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		switch-lineout-detect {
+			label = "Audio dock line-out detect";
+			gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LINEOUT_INSERT>;
+			debounce-interval = <10>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5639-tf701t",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "Asus Transformer Pad TF701T RT5639";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Speakers", "SPORP",
+			"Speakers", "SPORN",
+			"Speakers", "SPOLP",
+			"Speakers", "SPOLN",
+			"IN1P", "Mic Jack",
+			"IN1N", "Mic Jack",
+			"DMIC1", "Int Mic",
+			"DMIC2", "Int Mic";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5639>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>;
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA114_CLK_PLL_A>,
+			 <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA114_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA114_CLK_EXTERN1>;
+	};
+
+	vdd_5v0_sys: regulator-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	dvdd_1v8_lcd: regulator-vdd-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "dvdd_1v8_lcd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8_vio>;
+	};
+
+	vdd_3v7_bl: regulator-bl-en {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v7_bl";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	hdmi_5v0_sys: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_hdmi";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_smps10_out2>;
+	};
+
+	vdd_2v9_usd: regulator-vdd-usd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_sd_slot";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vcore_emmc>;
+	};
+
+	vdd_1v8_cam: regulator-cam-vio {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_cam";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&palmas_gpio 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8_vio>;
+	};
+
+	vdd_1v2_xusb: regulator-xusb-vio {
+		compatible = "regulator-fixed";
+		regulator-name = "avddio_1v2_xusb";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		gpio = <&palmas_gpio 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_3v3_xusb: regulator-xusb-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "hvdd_3v3_xusb";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpio = <&palmas_gpio 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_3v3_com: regulator-com {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_touch: regulator-touch-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_touch";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_1v8_touch: regulator-touch-vio {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_touch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/nvidia/tegra114-dalmore.dts
index fffd62bcea6a..c06b52fe330a 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/nvidia/tegra114-dalmore.dts
@@ -755,6 +755,8 @@
 	};
 
 	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -909,6 +911,19 @@
 				#gpio-cells = <2>;
 			};
 
+			pinmux {
+				compatible = "ti,tps65913-pinctrl";
+				pinctrl-names = "default";
+				pinctrl-0 = <&palmas_default>;
+
+				palmas_default: pinmux {
+					pin_gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+					};
+				};
+			};
+
 			pmic {
 				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
 				smps1-in-supply = <&tps65090_dcdc3_reg>;
@@ -1065,19 +1080,6 @@
 				interrupt-parent = <&palmas>;
 				interrupts = <8 0>;
 			};
-
-			pinmux {
-				compatible = "ti,tps65913-pinctrl";
-				pinctrl-names = "default";
-				pinctrl-0 = <&palmas_default>;
-
-				palmas_default: pinmux {
-					pin_gpio6 {
-						pins = "gpio6";
-						function = "gpio";
-					};
-				};
-			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/nvidia/tegra114-roth.dts
index b9d00009d1f4..a89b16573b42 100644
--- a/arch/arm/boot/dts/tegra114-roth.dts
+++ b/arch/arm/boot/dts/nvidia/tegra114-roth.dts
@@ -779,6 +779,8 @@
 
 	/* Usable on reworked devices only */
 	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/nvidia/tegra114-tn7.dts
index f02d8c79eee7..bfbdb345575a 100644
--- a/arch/arm/boot/dts/tegra114-tn7.dts
+++ b/arch/arm/boot/dts/nvidia/tegra114-tn7.dts
@@ -50,6 +50,8 @@
 	};
 
 	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/nvidia/tegra114.dtsi
index 09996acad639..a2a50f959927 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra114.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/memory/tegra114-mc.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/nvidia,tegra114-car.h>
 #include <dt-bindings/soc/tegra-pmc.h>
 
 / {
@@ -139,7 +140,7 @@
 			reg = <0x54400000 0x00040000>;
 			clocks = <&tegra_car TEGRA114_CLK_DSIB>,
 				 <&tegra_car TEGRA114_CLK_DSIBLP>,
-				 <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
+				 <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
 			clock-names = "dsi", "lp", "parent";
 			resets = <&tegra_car 82>;
 			reset-names = "dsi";
@@ -315,7 +316,6 @@
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA114_CLK_UARTA>;
 		resets = <&tegra_car 6>;
-		reset-names = "serial";
 		dmas = <&apbdma 8>, <&apbdma 8>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -328,7 +328,6 @@
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA114_CLK_UARTB>;
 		resets = <&tegra_car 7>;
-		reset-names = "serial";
 		dmas = <&apbdma 9>, <&apbdma 9>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -341,7 +340,6 @@
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA114_CLK_UARTC>;
 		resets = <&tegra_car 55>;
-		reset-names = "serial";
 		dmas = <&apbdma 10>, <&apbdma 10>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -354,7 +352,6 @@
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA114_CLK_UARTD>;
 		resets = <&tegra_car 65>;
-		reset-names = "serial";
 		dmas = <&apbdma 19>, <&apbdma 19>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -581,6 +578,21 @@
 		#iommu-cells = <1>;
 	};
 
+	hda@70030000 {
+		compatible = "nvidia,tegra114-hda", "nvidia,tegra30-hda";
+		reg = <0x70030000 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_HDA>,
+			 <&tegra_car TEGRA114_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA114_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&tegra_car 125>, /* hda */
+			 <&tegra_car 128>, /* hda2hdmi */
+			 <&tegra_car 111>; /* hda2codec_2x */
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		status = "disabled";
+	};
+
 	ahub@70080000 {
 		compatible = "nvidia,tegra114-ahub";
 		reg = <0x70080000 0x200>,
@@ -682,6 +694,29 @@
 		#nvidia,mipi-calibrate-cells = <1>;
 	};
 
+	dfll: clock@70110000 {
+		compatible = "nvidia,tegra114-dfll";
+		reg = <0x70110000 0x100>, /* DFLL control */
+		      <0x70110000 0x100>, /* I2C output control */
+		      <0x70110100 0x100>, /* Integrated I2C controller */
+		      <0x70110200 0x100>; /* Look-up table RAM */
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_DFLL_SOC>,
+			 <&tegra_car TEGRA114_CLK_DFLL_REF>,
+			 <&tegra_car TEGRA114_CLK_I2C5>;
+		clock-names = "soc", "ref", "i2c";
+		resets = <&tegra_car TEGRA114_RST_DFLL_DVCO>;
+		reset-names = "dvco";
+		#clock-cells = <0>;
+		clock-output-names = "dfllCPU_out";
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,cf = <10>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		status = "disabled";
+	};
+
 	mmc@78000000 {
 		compatible = "nvidia,tegra114-sdhci";
 		reg = <0x78000000 0x200>;
@@ -809,31 +844,49 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
+
+			clocks = <&tegra_car TEGRA114_CLK_CCLK_G>,
+				 <&tegra_car TEGRA114_CLK_CCLK_LP>,
+				 <&tegra_car TEGRA114_CLK_PLL_X>,
+				 <&tegra_car TEGRA114_CLK_PLL_P>,
+				 <&dfll>;
+			clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+			/* FIXME: what's the actual transition time? */
+			clock-latency = <300000>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <3>;
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts =
diff --git a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi b/arch/arm/boot/dts/nvidia/tegra124-apalis-emc.dtsi
index 7143c6b2ec3e..970f33dd9101 100644
--- a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-apalis-emc.dtsi
@@ -4,6 +4,8 @@
  *
  */
 
+#include <dt-bindings/clock/tegra124-car.h>
+
 / {
 	clock@60006000 {
 		emc-timings-1 {
@@ -1474,12 +1476,12 @@
 			};
 		};
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp-1200000000-1100;
-};
+	opp-table-actmon {
+		/delete-node/ opp-1200000000;
+	};
 
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp-1200000000;
+	opp-table-emc {
+		/delete-node/ opp-1200000000-1100;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/nvidia/tegra124-apalis-eval.dts
index bce12b3411fc..1aa7265554d9 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/nvidia/tegra124-apalis-eval.dts
@@ -40,8 +40,20 @@
 		};
 	};
 
+	gpio: gpio@6000d000 {
+		/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+		pex-perst-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PEX_PERST_N";
+		};
+	};
+
 	/* Apalis UART1 */
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -72,11 +84,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		pcie-switch@58 {
-			compatible = "plx,pex8605";
-			reg = <0x58>;
-		};
-
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
 			compatible = "st,m41t0";
@@ -243,13 +250,3 @@
 		vin-supply = <&reg_5v0>;
 	};
 };
-
-&gpio {
-	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n-hog {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PEX_PERST_N";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2-eval.dts
index 800283ad6bdc..23158bb82173 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
+++ b/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2-eval.dts
@@ -41,8 +41,20 @@
 		};
 	};
 
+	gpio@6000d000 {
+		/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+		pex-perst-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PEX_PERST_N";
+		};
+	};
+
 	/* Apalis UART1 */
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -73,11 +85,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		pcie-switch@58 {
-			compatible = "plx,pex8605";
-			reg = <0x58>;
-		};
-
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
 			compatible = "st,m41t0";
@@ -245,13 +252,3 @@
 		vin-supply = <&reg_5v0>;
 	};
 };
-
-&gpio {
-	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n-hog {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PEX_PERST_N";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2.dtsi
index dbb0da08cb95..54b7da4b6920 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2.dtsi
@@ -65,6 +65,24 @@
 		vdd-supply = <&reg_vdd_gpu>;
 	};
 
+	gpio@6000d000 {
+		/* I210 Gigabit Ethernet Controller Reset */
+		lan-reset-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "LAN_RESET_N";
+		};
+
+		/* Control MXM3 pin 26 Reset Module Output Carrier Input */
+		reset-moci-ctrl-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "RESET_MOCI_CTRL";
+		};
+	};
+
 	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -1539,16 +1557,19 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 	};
 
@@ -1585,18 +1606,18 @@
 			pinctrl-0 = <&as3722_default>;
 
 			as3722_default: pinmux {
+				gpio0-1-3-4-5-6 {
+					pins = "gpio0", "gpio1", "gpio3",
+					       "gpio4", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+
 				gpio2-7 {
 					pins = "gpio2", /* PWR_EN_+V3.3 */
 					       "gpio7"; /* +V1.6_LPO */
 					function = "gpio";
 					bias-pull-up;
 				};
-
-				gpio0-1-3-4-5-6 {
-					pins = "gpio0", "gpio1", "gpio3",
-					       "gpio4", "gpio5", "gpio6";
-					bias-high-impedance;
-				};
 			};
 
 			regulators {
@@ -1943,18 +1964,18 @@
 		};
 	};
 
-	clk32k_in: osc3 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-	};
-
 	cpus {
 		cpu@0 {
 			vdd-cpu-supply = <&reg_vdd_cpu>;
 		};
 	};
 
+	clk32k_in: osc3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
 	reg_1v05_avdd_hdmi_pll: regulator-1v05-avdd-hdmi-pll {
 		compatible = "regulator-fixed";
 		regulator-name = "+V1.05_AVDD_HDMI_PLL";
@@ -2056,21 +2077,3 @@
 		};
 	};
 };
-
-&gpio {
-	/* I210 Gigabit Ethernet Controller Reset */
-	lan-reset-n-hog {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LAN_RESET_N";
-	};
-
-	/* Control MXM3 pin 26 Reset Module Output Carrier Input */
-	reset-moci-ctrl-hog {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "RESET_MOCI_CTRL";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/nvidia/tegra124-apalis.dtsi
index d3f16c117b0c..c5a0d6aebaec 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-apalis.dtsi
@@ -64,6 +64,24 @@
 		vdd-supply = <&reg_vdd_gpu>;
 	};
 
+	gpio@6000d000 {
+		/* I210 Gigabit Ethernet Controller Reset */
+		lan-reset-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "LAN_RESET_N";
+		};
+
+		/* Control MXM3 pin 26 Reset Module Output Carrier Input */
+		reset-moci-ctrl-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "RESET_MOCI_CTRL";
+		};
+	};
+
 	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -1532,16 +1550,19 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 	};
 
@@ -1578,18 +1599,18 @@
 			pinctrl-0 = <&as3722_default>;
 
 			as3722_default: pinmux {
+				gpio0-1-3-4-5-6 {
+					pins = "gpio0", "gpio1", "gpio3",
+					       "gpio4", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+
 				gpio2-7 {
 					pins = "gpio2", /* PWR_EN_+V3.3 */
 					       "gpio7"; /* +V1.6_LPO */
 					function = "gpio";
 					bias-pull-up;
 				};
-
-				gpio0-1-3-4-5-6 {
-					pins = "gpio0", "gpio1", "gpio3",
-					       "gpio4", "gpio5", "gpio6";
-					bias-high-impedance;
-				};
 			};
 
 			regulators {
@@ -1935,18 +1956,18 @@
 		};
 	};
 
-	clk32k_in: osc3 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-	};
-
 	cpus {
 		cpu@0 {
 			vdd-cpu-supply = <&reg_vdd_cpu>;
 		};
 	};
 
+	clk32k_in: osc3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
 	reg_1v05_avdd_hdmi_pll: regulator-1v05-avdd-hdmi-pll {
 		compatible = "regulator-fixed";
 		regulator-name = "+V1.05_AVDD_HDMI_PLL";
@@ -2048,21 +2069,3 @@
 		};
 	};
 };
-
-&gpio {
-	/* I210 Gigabit Ethernet Controller Reset */
-	lan-reset-n-hog {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LAN_RESET_N";
-	};
-
-	/* Control MXM3 pin 26 Reset Module Output Carrier Input */
-	reset-moci-ctrl-hog {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "RESET_MOCI_CTRL";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi b/arch/arm/boot/dts/nvidia/tegra124-jetson-tk1-emc.dtsi
index 79e776db5f37..d10e5334a6c6 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-jetson-tk1-emc.dtsi
@@ -1,4 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/tegra124-car.h>
+
 / {
 	clock@60006000 {
 		emc-timings-3 {
@@ -2429,12 +2432,12 @@
 			};
 		};
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp-1200000000-1100;
-};
+	opp-table-actmon {
+		/delete-node/ opp-1200000000;
+	};
 
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp-1200000000;
+	opp-table-emc {
+		/delete-node/ opp-1200000000-1100;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/nvidia/tegra124-jetson-tk1.dts
index f41dd4039c07..f09109be1152 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/nvidia/tegra124-jetson-tk1.dts
@@ -68,10 +68,6 @@
 		};
 	};
 
-	cec@70015000 {
-		status = "okay";
-	};
-
 	gpu@57000000 {
 		/*
 		 * Node left disabled on purpose - the bootloader will enable
@@ -1389,6 +1385,7 @@
 	 */
 	serial@70006000 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 		status = "okay";
 	};
@@ -1402,12 +1399,15 @@
 	 */
 	serial@70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 		status = "okay";
 	};
 
 	/* DB9 serial port */
 	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -1683,6 +1683,10 @@
 		};
 	};
 
+	cec@70015000 {
+		status = "okay";
+	};
+
 	/* Serial ATA */
 	sata@70020000 {
 		status = "okay";
diff --git a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi b/arch/arm/boot/dts/nvidia/tegra124-nyan-big-emc.dtsi
index 31b2e26c69d4..cadb1969f1cc 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan-big-emc.dtsi
@@ -1,9 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
-/ {
-	apbmisc@70000800 {
-		nvidia,long-ram-code;
-	};
 
+#include <dt-bindings/clock/tegra124-car.h>
+
+/ {
 	clock@60006000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
@@ -249,6 +248,10 @@
 		};
 	};
 
+	apbmisc@70000800 {
+		nvidia,long-ram-code;
+	};
+
 	memory-controller@70019000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
@@ -6678,14 +6681,14 @@
 			};
 		};
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp-924000000-1100;
-	/delete-node/ opp-1200000000-1100;
-};
+	opp-table-actmon {
+		/delete-node/ opp-924000000;
+		/delete-node/ opp-1200000000;
+	};
 
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp-924000000;
-	/delete-node/ opp-1200000000;
+	opp-table-emc {
+		/delete-node/ opp-924000000-1100;
+		/delete-node/ opp-1200000000-1100;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra124-nyan-big-fhd.dts b/arch/arm/boot/dts/nvidia/tegra124-nyan-big-fhd.dts
index 4db43324dafa..4db43324dafa 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big-fhd.dts
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan-big-fhd.dts
diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/nvidia/tegra124-nyan-big.dts
index fdc1d64dfff9..8bca9599ad6e 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big.dts
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan-big.dts
@@ -18,28 +18,18 @@
 			aux-bus {
 				panel: panel {
 					compatible = "auo,b133xtn01";
+					power-supply = <&vdd_3v3_panel>;
 					backlight = <&backlight>;
 				};
 			};
 		};
 	};
 
-	mmc@700b0400 { /* SD Card on this bus */
-		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-max98090-nyan-big",
-			     "nvidia,tegra-audio-max98090-nyan",
-			     "nvidia,tegra-audio-max98090";
-		nvidia,model = "GoogleNyanBig";
-	};
-
 	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
-		pinmux_default: common {
+		pinmux_default: pinmux {
 			clk_32k_out_pa0 {
 				nvidia,pins = "clk_32k_out_pa0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1344,4 +1334,15 @@
 			};
 		};
 	};
+
+	mmc@700b0400 { /* SD Card on this bus */
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-max98090-nyan-big",
+			     "nvidia,tegra-audio-max98090-nyan",
+			     "nvidia,tegra-audio-max98090";
+		nvidia,model = "GoogleNyanBig";
+	};
 };
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi b/arch/arm/boot/dts/nvidia/tegra124-nyan-blaze-emc.dtsi
index 2ce1b12be44d..e8dcc4f51fc5 100644
--- a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan-blaze-emc.dtsi
@@ -1,4 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/tegra124-car.h>
+
 / {
 	clock@60006000 {
 		emc-timings-1 {
@@ -2055,14 +2058,14 @@
 			};
 		};
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp-924000000-1100;
-	/delete-node/ opp-1200000000-1100;
-};
+	opp-table-actmon {
+		/delete-node/ opp-924000000;
+		/delete-node/ opp-1200000000;
+	};
 
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp-924000000;
-	/delete-node/ opp-1200000000;
+	opp-table-emc {
+		/delete-node/ opp-924000000-1100;
+		/delete-node/ opp-1200000000-1100;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/nvidia/tegra124-nyan-blaze.dts
index abdf4456826f..432540c10065 100644
--- a/arch/arm/boot/dts/tegra124-nyan-blaze.dts
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan-blaze.dts
@@ -20,24 +20,18 @@
 			aux-bus {
 				panel: panel {
 					compatible = "samsung,ltn140at29-301";
+					power-supply = <&vdd_3v3_panel>;
 					backlight = <&backlight>;
 				};
 			};
 		};
 	};
 
-	sound {
-		compatible = "nvidia,tegra-audio-max98090-nyan-blaze",
-			     "nvidia,tegra-audio-max98090-nyan",
-			     "nvidia,tegra-audio-max98090";
-		nvidia,model = "GoogleNyanBlaze";
-	};
-
 	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
-		pinmux_default: common {
+		pinmux_default: pinmux {
 			clk_32k_out_pa0 {
 				nvidia,pins = "clk_32k_out_pa0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1342,4 +1336,11 @@
 			};
 		};
 	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-max98090-nyan-blaze",
+			     "nvidia,tegra-audio-max98090-nyan",
+			     "nvidia,tegra-audio-max98090";
+		nvidia,model = "GoogleNyanBlaze";
+	};
 };
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi
index 13061ab5247b..974c76f007db 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi
@@ -70,6 +70,8 @@
 
 	serial@70006000 {
 		/* Debug connector on the bottom of the board near SD card. */
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -336,6 +338,7 @@
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
 			reg = <0>;
+			wakeup-source;
 
 			google,cros-ec-spi-msg-delay = <2000>;
 
@@ -498,12 +501,6 @@
 		};
 	};
 
-	sdhci0_pwrseq: sdhci0_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-
-		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
-	};
-
 	mmc@700b0000 { /* WiFi/BT on this bus */
 		status = "okay";
 		bus-width = <4>;
@@ -595,14 +592,35 @@
 	};
 
 	cpus {
-		cpu@0 {
+		cpu0: cpu@0 {
+			#cooling-cells = <2>;
 			vdd-cpu-supply = <&vdd_cpu>;
 		};
+
+		cpu1: cpu@1 {
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			#cooling-cells = <2>;
+		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <30>;
+			wakeup-source;
+		};
+
 		switch-lid {
 			label = "Lid";
 			gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
@@ -611,14 +629,18 @@
 			debounce-interval = <1>;
 			wakeup-source;
 		};
+	};
 
-		key-power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <30>;
-			wakeup-source;
-		};
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	sdhci0_pwrseq: pwrseq-sdhci0 {
+		compatible = "mmc-pwrseq-simple";
+
+		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
 	};
 
 	vdd_mux: regulator-mux {
@@ -694,6 +716,7 @@
 		regulator-name = "+5V_USB_HS";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
 		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		gpio-open-drain;
@@ -705,6 +728,7 @@
 		regulator-name = "+5V_USB_SS";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
 		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		gpio-open-drain;
@@ -785,30 +809,6 @@
 				<&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
 	};
 
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		priority = <200>;
-	};
-
-	cpus {
-		cpu0: cpu@0 {
-			#cooling-cells = <2>;
-		};
-
-		cpu1: cpu@1 {
-			#cooling-cells = <2>;
-		};
-
-		cpu2: cpu@2 {
-			#cooling-cells = <2>;
-		};
-
-		cpu3: cpu@3 {
-			#cooling-cells = <2>;
-		};
-	};
-
 	thermal-zones {
 		cpu-skin-thermal {
 			polling-delay-passive = <1000>; /* milliseconds */
@@ -838,4 +838,4 @@
 	};
 };
 
-#include "cros-ec-keyboard.dtsi"
+#include "../cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi b/arch/arm/boot/dts/nvidia/tegra124-peripherals-opp.dtsi
index b262c1289da5..b262c1289da5 100644
--- a/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-peripherals-opp.dtsi
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/nvidia/tegra124-venice2.dts
index 8f40fcfc11b0..df98dc2a67b8 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/nvidia/tegra124-venice2.dts
@@ -52,6 +52,7 @@
 			aux-bus {
 				panel: panel {
 					compatible = "lg,lp129qe";
+					power-supply = <&vdd_3v3_panel>;
 					backlight = <&backlight>;
 				};
 			};
@@ -70,7 +71,7 @@
 		pinctrl-names = "boot";
 		pinctrl-0 = <&pinmux_boot>;
 
-		pinmux_boot: common {
+		pinmux_boot: pinmux {
 			dap_mclk1_pw4 {
 				nvidia,pins = "dap_mclk1_pw4";
 				nvidia,function = "extperiph1";
@@ -608,6 +609,8 @@
 	};
 
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -854,6 +857,7 @@
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
 			reg = <0>;
+			wakeup-source;
 
 			google,cros-ec-spi-msg-delay = <2000>;
 
@@ -1252,4 +1256,4 @@
 	};
 };
 
-#include "cros-ec-keyboard.dtsi"
+#include "../cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/nvidia/tegra124.dtsi
index a9ab548781e1..ec4f0e346b2b 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124.dtsi
@@ -165,6 +165,22 @@
 			status = "disabled";
 		};
 
+		dsia: dsi@54300000 {
+			compatible = "nvidia,tegra124-dsi";
+			reg = <0x0 0x54300000 0x0 0x00040000>;
+			clocks = <&tegra_car TEGRA124_CLK_DSIA>,
+				 <&tegra_car TEGRA124_CLK_DSIALP>,
+				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		vic@54340000 {
 			compatible = "nvidia,tegra124-vic";
 			reg = <0x0 0x54340000 0x0 0x00040000>;
@@ -177,6 +193,22 @@
 			iommus = <&mc TEGRA_SWGROUP_VIC>;
 		};
 
+		dsib: dsi@54400000 {
+			compatible = "nvidia,tegra124-dsi";
+			reg = <0x0 0x54400000 0x0 0x00040000>;
+			clocks = <&tegra_car TEGRA124_CLK_DSIB>,
+				 <&tegra_car TEGRA124_CLK_DSIBLP>,
+				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 82>;
+			reset-names = "dsi";
+			nvidia,mipi-calibrate = <&mipi 0x180>; /* DSIC & DSID pads */
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		sor@54540000 {
 			compatible = "nvidia,tegra124-sor";
 			reg = <0x0 0x54540000 0x0 0x00040000>;
@@ -380,7 +412,6 @@
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTA>;
 		resets = <&tegra_car 6>;
-		reset-names = "serial";
 		dmas = <&apbdma 8>, <&apbdma 8>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -393,7 +424,6 @@
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTB>;
 		resets = <&tegra_car 7>;
-		reset-names = "serial";
 		dmas = <&apbdma 9>, <&apbdma 9>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -406,7 +436,6 @@
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTC>;
 		resets = <&tegra_car 55>;
-		reset-names = "serial";
 		dmas = <&apbdma 10>, <&apbdma 10>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -419,7 +448,6 @@
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTD>;
 		resets = <&tegra_car 65>;
-		reset-names = "serial";
 		dmas = <&apbdma 19>, <&apbdma 19>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -639,6 +667,16 @@
 		reset-names = "fuse";
 	};
 
+	cec@70015000 {
+		compatible = "nvidia,tegra124-cec";
+		reg = <0x0 0x70015000 0x0 0x00001000>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_CEC>;
+		clock-names = "cec";
+		status = "disabled";
+		hdmi-phandle = <&hdmi>;
+	};
+
 	mc: memory-controller@70019000 {
 		compatible = "nvidia,tegra124-mc";
 		reg = <0x0 0x70019000 0x0 0x1000>;
@@ -906,16 +944,6 @@
 		status = "disabled";
 	};
 
-	cec@70015000 {
-		compatible = "nvidia,tegra124-cec";
-		reg = <0x0 0x70015000 0x0 0x00001000>;
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_CEC>;
-		clock-names = "cec";
-		status = "disabled";
-		hdmi-phandle = <&hdmi>;
-	};
-
 	soctherm: thermal-sensor@700e2000 {
 		compatible = "nvidia,tegra124-soctherm";
 		reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */
@@ -942,6 +970,14 @@
 		};
 	};
 
+	mipi: mipi@700e3000 {
+		compatible = "nvidia,tegra124-mipi";
+		reg = <0x0 0x700e3000 0x0 0x100>;
+		clocks = <&tegra_car TEGRA124_CLK_MIPI_CAL>;
+		clock-names = "mipi-cal";
+		#nvidia,mipi-calibrate-cells = <1>;
+	};
+
 	dfll: clock@70110000 {
 		compatible = "nvidia,tegra124-dfll";
 		reg = <0 0x70110000 0 0x100>, /* DFLL control */
diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/nvidia/tegra20-acer-a500-picasso.dts
index dac6d02a1b15..a619ea83ed3b 100644
--- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-acer-a500-picasso.dts
@@ -65,7 +65,7 @@
 			rgb {
 				status = "okay";
 
-				port@0 {
+				port {
 					lcd_output: endpoint {
 						remote-endpoint = <&lvds_encoder_input>;
 						bus-width = <18>;
@@ -342,36 +342,39 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
 			};
+
 			pta {
 				nvidia,pins = "pta";
 				nvidia,function = "rsvd4";
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
+
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
+				nvidia,function = "rsvd4";
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
+
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
+				nvidia,function = "i2c2";
 			};
 		};
 	};
@@ -390,12 +393,14 @@
 
 	uartb: serial@70006040 {
 		compatible = "nvidia,tegra20-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 		/* GPS BCM4751 */
 	};
 
 	uartc: serial@70006200 {
 		compatible = "nvidia,tegra20-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 		status = "okay";
 
@@ -425,6 +430,10 @@
 		/* Docking station */
 	};
 
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
 	i2c@7000c000 {
 		clock-frequency = <400000>;
 		status = "okay";
@@ -512,45 +521,6 @@
 		status = "okay";
 	};
 
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@7000c400}>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		panel_ddc: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			embedded-controller@58 {
-				compatible = "acer,a500-iconia-ec", "ene,kb930";
-				reg = <0x58>;
-
-				system-power-controller;
-
-				monitored-battery = <&bat1010>;
-				power-supplies = <&mains>;
-			};
-		};
-	};
-
-	pwm: pwm@7000a000 {
-		status = "okay";
-	};
-
 	i2c@7000d000 {
 		clock-frequency = <100000>;
 		status = "okay";
@@ -729,396 +699,6 @@
 		core-supply = <&vdd_core>;
 	};
 
-	usb@c5000000 {
-		compatible = "nvidia,tegra20-udc";
-		status = "okay";
-		dr_mode = "peripheral";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-		dr_mode = "peripheral";
-		nvidia,xcvr-setup-use-fuses;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-		nvidia,xcvr-setup-use-fuses;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-		vbus-supply = <&vdd_5v0_sys>;
-	};
-
-	brcm_wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-
-		clocks = <&rtc_32k_wifi>;
-		clock-names = "ext_clock";
-
-		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
-		post-power-on-delay-ms = <300>;
-		power-off-delay-us = <300>;
-	};
-
-	sdmmc1: mmc@c8000000 {
-		status = "okay";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
-		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
-		assigned-clock-rates = <50000000>;
-
-		max-frequency = <50000000>;
-		keep-power-in-suspend;
-		bus-width = <4>;
-		non-removable;
-
-		mmc-pwrseq = <&brcm_wifi_pwrseq>;
-		vmmc-supply = <&vdd_3v3_sys>;
-		vqmmc-supply = <&vdd_1v8_sys>;
-
-		/* Azurewave AW-NH611 BCM4329 */
-		wifi@1 {
-			reg = <1>;
-			compatible = "brcm,bcm4329-fmac";
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "host-wake";
-		};
-	};
-
-	sdmmc3: mmc@c8000400 {
-		status = "okay";
-		bus-width = <4>;
-		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
-		vmmc-supply = <&vdd_3v3_sys>;
-		vqmmc-supply = <&vdd_3v3_sys>;
-	};
-
-	sdmmc4: mmc@c8000600 {
-		status = "okay";
-		bus-width = <8>;
-		vmmc-supply = <&vcore_emmc>;
-		vqmmc-supply = <&vdd_3v3_sys>;
-		non-removable;
-	};
-
-	mains: ac-adapter-detect {
-		compatible = "gpio-charger";
-		charger-type = "mains";
-		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_3v3_sys>;
-		pwms = <&pwm 2 41667>;
-
-		brightness-levels = <7 255>;
-		num-interpolated-steps = <248>;
-		default-brightness-level = <20>;
-	};
-
-	bat1010: battery-2s1p {
-		compatible = "simple-battery";
-		charge-full-design-microamp-hours = <3260000>;
-		energy-full-design-microwatt-hours = <24000000>;
-		operating-range-celsius = <0 40>;
-	};
-
-	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
-	clk32k_in: clock-32k-in {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "tps658621-out32k";
-	};
-
-	/*
-	 * This standalone onboard fixed-clock always-ON 32KHz
-	 * oscillator is used as a reference clock-source by the
-	 * Azurewave WiFi/BT module.
-	 */
-	rtc_32k_wifi: clock-32k-wifi {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "kk3270032";
-	};
-
-	cpus {
-		cpu0: cpu@0 {
-			cpu-supply = <&vdd_cpu>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-		};
-
-		cpu1: cpu@1 {
-			cpu-supply = <&vdd_cpu>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-		};
-	};
-
-	display-panel {
-		compatible = "auo,b101ew05", "panel-lvds";
-
-		ddc-i2c-bus = <&panel_ddc>;
-		power-supply = <&vdd_pnl>;
-		backlight = <&backlight>;
-
-		width-mm = <218>;
-		height-mm = <135>;
-
-		data-mapping = "jeida-18";
-
-		panel-timing {
-			clock-frequency = <71200000>;
-			hactive = <1280>;
-			vactive = <800>;
-			hfront-porch = <8>;
-			hback-porch = <18>;
-			hsync-len = <184>;
-			vsync-len = <3>;
-			vfront-porch = <4>;
-			vback-porch = <8>;
-		};
-
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&lvds_encoder_output>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
-		key-rotation-lock {
-			label = "Rotate-lock";
-			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
-			linux,code = <SW_ROTATE_LOCK>;
-			linux,input-type = <EV_SW>;
-			debounce-interval = <10>;
-		};
-
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-	};
-
-	haptic-feedback {
-		compatible = "gpio-vibrator";
-		enable-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
-		vcc-supply = <&vdd_3v3_sys>;
-	};
-
-	lvds-encoder {
-		compatible = "ti,sn75lvds83", "lvds-encoder";
-
-		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
-		power-supply = <&vdd_3v3_sys>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				lvds_encoder_input: endpoint {
-					remote-endpoint = <&lcd_output>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				lvds_encoder_output: endpoint {
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-	};
-
-	vdd_5v0_sys: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	vdd_3v3_sys: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_3v3_vs";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	vdd_1v8_sys: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_1v8_vs";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	vdd_pnl: regulator-panel {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_panel";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-enable-ramp-delay = <300000>;
-		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8903-picasso",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "Acer Iconia Tab A500 WM8903";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "LINEOUTL",
-			"Int Spk", "LINEOUTR",
-			"Mic Jack", "MICBIAS",
-			"IN2L", "Mic Jack",
-			"IN2R", "Mic Jack",
-			"IN1L", "Int Mic",
-			"IN1R", "Int Mic";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
-		nvidia,int-mic-en-gpios = <&wm8903 1 GPIO_ACTIVE_HIGH>;
-		nvidia,headset;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-
-	thermal-zones {
-		/*
-		 * NCT1008 has two sensors:
-		 *
-		 *	0: internal that monitors ambient/skin temperature
-		 *	1: external that is connected to the CPU's diode
-		 *
-		 * Ideally we should use userspace thermal governor,
-		 * but it's a much more complex solution.  The "skin"
-		 * zone is a simpler solution which prevents A500 from
-		 * getting too hot from a user's tactile perspective.
-		 * The CPU zone is intended to protect silicon from damage.
-		 */
-
-		skin-thermal {
-			polling-delay-passive = <1000>; /* milliseconds */
-			polling-delay = <5000>; /* milliseconds */
-
-			thermal-sensors = <&nct1008 0>;
-
-			trips {
-				trip0: skin-alert {
-					/* start throttling at 60C */
-					temperature = <60000>;
-					hysteresis = <200>;
-					type = "passive";
-				};
-
-				trip1: skin-crit {
-					/* shut down at 70C */
-					temperature = <70000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&trip0>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-
-		cpu-thermal {
-			polling-delay-passive = <1000>; /* milliseconds */
-			polling-delay = <5000>; /* milliseconds */
-
-			thermal-sensors = <&nct1008 1>;
-
-			trips {
-				trip2: cpu-alert {
-					/* throttle at 85C until temperature drops to 84.8C */
-					temperature = <85000>;
-					hysteresis = <200>;
-					type = "passive";
-				};
-
-				trip3: cpu-crit {
-					/* shut down at 90C */
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map1 {
-					trip = <&trip2>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-	};
-
 	memory-controller@7000f400 {
 		nvidia,use-ram-code;
 
@@ -1514,9 +1094,434 @@
 			};
 		};
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp-666000000;
-	/delete-node/ opp-760000000;
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	sdmmc1: mmc@c8000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_1v8_sys>;
+
+		/* Azurewave AW-NH611 BCM4329 */
+		wifi@1 {
+			reg = <1>;
+			compatible = "brcm,bcm4329-fmac";
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc3: mmc@c8000400 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	sdmmc4: mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+		non-removable;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_3v3_sys>;
+		pwms = <&pwm 2 41667>;
+
+		brightness-levels = <7 255>;
+		num-interpolated-steps = <248>;
+		default-brightness-level = <20>;
+	};
+
+	bat1010: battery-2s1p {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3260000>;
+		energy-full-design-microwatt-hours = <24000000>;
+		operating-range-celsius = <0 40>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k-in {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "tps658621-out32k";
+	};
+
+	/*
+	 * This standalone onboard fixed-clock always-ON 32KHz
+	 * oscillator is used as a reference clock-source by the
+	 * Azurewave WiFi/BT module.
+	 */
+	rtc_32k_wifi: clock-32k-wifi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "kk3270032";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	display-panel {
+		compatible = "auo,b101ew05", "panel-lvds";
+
+		ddc-i2c-bus = <&panel_ddc>;
+		power-supply = <&vdd_pnl>;
+		backlight = <&backlight>;
+
+		width-mm = <218>;
+		height-mm = <135>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <71200000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <8>;
+			hback-porch = <18>;
+			hsync-len = <184>;
+			vsync-len = <3>;
+			vfront-porch = <4>;
+			vback-porch = <8>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-rotation-lock {
+			label = "Rotate-lock";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
+			linux,code = <SW_ROTATE_LOCK>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <10>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		panel_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			embedded-controller@58 {
+				compatible = "acer,a500-iconia-ec", "ene,kb930";
+				reg = <0x58>;
+
+				system-power-controller;
+
+				monitored-battery = <&bat1010>;
+				power-supplies = <&mains>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_3v3_sys>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&lcd_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-666000000;
+		/delete-node/ opp-760000000;
+	};
+
+	vdd_5v0_sys: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_vs";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_1v8_sys: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_vs";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_pnl: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <300000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-picasso",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Acer Iconia Tab A500 WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "LINEOUTL",
+			"Int Spk", "LINEOUTR",
+			"Mic Jack", "MICBIAS",
+			"IN2L", "Mic Jack",
+			"IN2R", "Mic Jack",
+			"IN1L", "Int Mic",
+			"IN1R", "Int Mic";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,int-mic-en-gpios = <&wm8903 1 GPIO_ACTIVE_HIGH>;
+		nvidia,headset;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		/*
+		 * NCT1008 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone is a simpler solution which prevents A500 from
+		 * getting too hot from a user's tactile perspective.
+		 * The CPU zone is intended to protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* start throttling at 60C */
+					temperature = <60000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 70C */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&rtc_32k_wifi>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
 };
diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-sl101.dts b/arch/arm/boot/dts/nvidia/tegra20-asus-sl101.dts
new file mode 100644
index 000000000000..8828129d1fa3
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-asus-sl101.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra20-asus-transformer-common.dtsi"
+
+/ {
+	model = "ASUS Eee Pad Slider SL101";
+	compatible = "asus,sl101", "nvidia,tegra20";
+
+	i2c@7000c000 {
+		magnetometer@e {
+			mount-matrix =  "1",  "0",  "0",
+					"0", "-1",  "0",
+					"0",  "0",  "1";
+		};
+
+		/* Atmel MXT1386 Touchscreen */
+		touchscreen@5a {
+			compatible = "atmel,maxtouch";
+			reg = <0x5a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>;
+
+			reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+
+			atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
+		};
+
+		gyroscope@68 {
+			mount-matrix =	 "0",  "1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0",  "1";
+
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =	 "1",  "0",  "0",
+							 "0", "-1",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-tablet-mode {
+			label = "Tablet Mode";
+			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_TABLET_MODE>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts b/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts
new file mode 100644
index 000000000000..0d93820a5ad4
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra20-asus-transformer-common.dtsi"
+
+/ {
+	model = "ASUS Eee Pad Transformer TF101";
+	compatible = "asus,tf101", "nvidia,tegra20";
+
+	i2c@7000c000 {
+		magnetometer@e {
+			mount-matrix = "-1",  "0",  "0",
+					"0",  "1",  "0",
+					"0",  "0", "-1";
+		};
+
+		/* Atmel MXT1386 Touchscreen */
+		touchscreen@5b {
+			compatible = "atmel,maxtouch";
+			reg = <0x5b>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>;
+
+			reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+
+			atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
+		};
+
+		gyroscope@68 {
+			mount-matrix =	 "0",  "1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0",  "1";
+
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =	"-1",  "0",  "0",
+							 "0", "-1",  "0",
+							 "0",  "0", "-1";
+				};
+			};
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-dock-hall-sensor {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi b/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi
new file mode 100644
index 000000000000..b48f53c00efa
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi
@@ -0,0 +1,1268 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/atmel-maxtouch.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+#include "tegra20-cpu-opp-microvolt.dtsi"
+
+/ {
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc3; /* MicroSD */
+		mmc2 = &sdmmc1; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd;
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@2ffe0000 {
+			compatible = "ramoops";
+			reg = <0x2ffe0000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		linux,cma@30000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x30000000 0x10000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port {
+					lcd_output: endpoint {
+						remote-endpoint = <&lvds_encoder_input>;
+						bus-width = <18>;
+					};
+				};
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+			hdmi-supply = <&vdd_hdmi_en>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio@6000d000 {
+		charging-enable-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+
+			lm1 {
+				nvidia,pins = "lm1";
+				nvidia,function = "rsvd3";
+			};
+
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+
+			gpv {
+				nvidia,pins = "gpv", "slxa";
+				nvidia,function = "pcie";
+			};
+
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lpw0",
+					"lpw2", "lsc0", "lsc1", "lsck", "lsda",
+					"lspi", "lvp1", "lvs";
+				nvidia,function = "displaya";
+			};
+
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk";
+				nvidia,function = "sdio3";
+			};
+
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+
+			slxd {
+				nvidia,pins = "slxd";
+				nvidia,function = "spdif";
+			};
+
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+
+			conf-ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "dap1", "dap4",
+					"dte", "ddc", "dtf", "gma", "gmc",
+					"gme", "gpu", "gpu7", "gpv", "i2cp",
+					"irrx", "irtx", "pta", "rm", "sdc",
+					"sdd", "slxc", "slxd", "slxk", "spdi",
+					"spdo", "uac", "uad",
+					"uda", "csus";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf-ate {
+				nvidia,pins = "ate", "dap2", "dap3", "gmb", "gmd",
+					"owc", "spia", "spib", "spic",
+					"spid", "spie", "spig", "slxa";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf-ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+
+			conf-crtp {
+				nvidia,pins = "crtp", "spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf-dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf-spif {
+				nvidia,pins = "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf-hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsck", "lsda", "lsdi", "lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf-kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "uaa", "uab",
+					"uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf-lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+
+			conf-ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
+					"lvp1", "lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf-ld17-0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+
+			drive-sdio1 {
+				nvidia,pins = "drive_sdio1", "drive_ddc", "drive_vi1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			drive-csus {
+				nvidia,pins = "drive_csus";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_idle: pinmux-i2cmux-idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux-i2cmux-pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+	};
+
+	spdif@70002400 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
+	i2s@70002800 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra20-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		/* GPS BCM4751 */
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra20-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			/* PLLP 216MHz / 16 / 4 */
+			max-speed = <3375000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_sys>;
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Aichi AMI306 digital compass */
+		magnetometer@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0xe>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_EDGE_RISING>;
+
+			avdd-supply = <&vdd_3v3_sys>;
+			dvdd-supply = <&vdd_1v8_sys>;
+		};
+
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_BOTH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0x83>;
+			micdet-delay = <100>;
+
+			gpio-cfg = <
+				0x00000600 /* DMIC_LR, output */
+				0x00000680 /* DMIC_DAT, input */
+				0x00000000 /* Speaker-enable GPIO, output, low */
+				0xffffffff /* don't touch */
+				0xffffffff /* don't touch */
+			>;
+
+			AVDD-supply  = <&vdd_1v8_sys>;
+			CPVDD-supply = <&vdd_1v8_sys>;
+			DBVDD-supply = <&vdd_1v8_sys>;
+			DCVDD-supply = <&vdd_1v8_sys>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply    = <&vdd_3v3_sys>;
+			vlogic-supply = <&vdd_1v8_sys>;
+
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0xf>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(N, 4) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_1v8_sys>;
+					vddio-supply = <&vdd_1v8_sys>;
+				};
+			};
+		};
+	};
+
+	i2c2: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_sys>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				vdd_core: sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+				};
+
+				vdd_cpu: sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-coupled-with = <&vdd_core &rtc_vdd>;
+					regulator-coupled-max-spread = <550000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				rtc_vdd: ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&vdd_core &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-rtc-regulator;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				vcore_emmc: ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		nct1008: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&vdd_3v3_sys>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
+
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <100>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@3 {
+			reg = <0x3>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007dc010 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e0 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e0010 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			lpddr2 {
+				compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
+				revision-id = <1 0>;
+				density = <2048>;
+				io-width = <16>;
+			};
+		};
+	};
+
+	/* Peripheral USB via ASUS connector */
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Dock's USB port */
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		nvidia,xcvr-setup-use-fuses;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	sdmmc1: mmc@c8000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
+		assigned-clock-rates = <40000000>;
+
+		max-frequency = <40000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+
+		/* Azurewave AW-NH615 BCM4329B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc3: mmc@c8000400 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	sdmmc4: mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+		non-removable;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_3v3_sys>;
+		pwms = <&pwm 2 4000000>;
+
+		brightness-levels = <7 255>;
+		num-interpolated-steps = <248>;
+		default-brightness-level = <20>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k-in {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	display-panel {
+		compatible = "auo,b101ew05", "panel-lvds";
+
+		/* AUO B101EW05 using custom timings */
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+		power-supply = <&vdd_pnl_reg>;
+
+		width-mm = <218>;
+		height-mm = <135>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <71200000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <8>;
+			hback-porch = <18>;
+			hsync-len = <184>;
+			vsync-len = <3>;
+			vfront-porch = <4>;
+			vback-porch = <8>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c2>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smart-battery@b {
+				compatible = "ti,bq20z75", "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,i2c-retry-count = <2>;
+				sbs,poll-retry-count = <10>;
+				power-supplies = <&mains>;
+			};
+
+			/* Dynaimage ambient light sensor */
+			light-sensor@1c {
+				compatible = "dynaimage,al3000a";
+				reg = <0x1c>;
+
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+
+				vdd-supply = <&vdd_1v8_sys>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_3v3_sys>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&lcd_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-666000000;
+		/delete-node/ opp-760000000;
+	};
+
+	vdd_5v0_sys: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_vs";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie_vdd";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	vdd_pnl_reg: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_1v8_sys: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_vs";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_hdmi_en: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_hdmi_en";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+		gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-wm8903-tf101",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Asus EeePad Transformer WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"IN2L", "Mic Jack",
+			"DMICDAT", "Int Mic";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
+		nvidia,coupled-mic-hp-det;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		/*
+		 * NCT1008 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone is a simpler solution which prevents TF101 from
+		 * getting too hot from a user's tactile perspective.
+		 * The CPU zone is intended to protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* start throttling at 60C */
+					temperature = <60000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 70C */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+		power-off-delay-us = <200>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/nvidia/tegra20-colibri-eval-v3.dts
index cb1190b77db3..be2ead4147f2 100644
--- a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-colibri-eval-v3.dts
@@ -102,6 +102,8 @@
 
 	/* Colibri UART-A */
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -143,6 +145,24 @@
 		status = "okay";
 	};
 
+	/* SPI4: Colibri SSP */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		can@0 {
+			compatible = "microchip,mcp2515";
+			reg = <0>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			/* CAN_INT */
+			interrupts = <TEGRA_GPIO(A, 0) IRQ_TYPE_EDGE_FALLING>;
+			spi-max-frequency = <10000000>;
+			vdd-supply = <&reg_3v3>;
+			xceiver-supply = <&reg_5v0>;
+		};
+	};
+
 	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
 	usb@c5000000 {
 		status = "okay";
@@ -164,24 +184,6 @@
 		vbus-supply = <&reg_usbh_vbus>;
 	};
 
-	/* SPI4: Colibri SSP */
-	spi@7000da00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-
-		can@0 {
-			compatible = "microchip,mcp2515";
-			reg = <0>;
-			clocks = <&clk16m>;
-			interrupt-parent = <&gpio>;
-			/* CAN_INT */
-			interrupts = <TEGRA_GPIO(A, 0) IRQ_TYPE_EDGE_FALLING>;
-			spi-max-frequency = <10000000>;
-			vdd-supply = <&reg_3v3>;
-			xceiver-supply = <&reg_5v0>;
-		};
-	};
-
 	/* SD/MMC */
 	mmc@c8000600 {
 		status = "okay";
@@ -200,7 +202,7 @@
 		pwms = <&pwm 0 5000000>; /* PWM<A> */
 	};
 
-	clk16m: osc3 {
+	clk16m: clock-osc3 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <16000000>;
diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/nvidia/tegra20-colibri-iris.dts
index 53487cc21513..1da202ad1ded 100644
--- a/arch/arm/boot/dts/tegra20-colibri-iris.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-colibri-iris.dts
@@ -102,6 +102,8 @@
 
 	/* Colibri UART-A */
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -143,6 +145,12 @@
 		status = "okay";
 	};
 
+	/* SPI4: Colibri SSP */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
 	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
 	usb@c5000000 {
 		status = "okay";
@@ -164,12 +172,6 @@
 		vbus-supply = <&reg_usbh_vbus>;
 	};
 
-	/* SPI4: Colibri SSP */
-	spi@7000da00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-	};
-
 	/* SD/MMC */
 	mmc@c8000600 {
 		status = "okay";
diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
index 8ebd8afc857d..2ff7be8f1382 100644
--- a/arch/arm/boot/dts/tegra20-colibri.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
@@ -27,6 +27,31 @@
 		};
 	};
 
+	gpio@6000d000 {
+		lan-reset-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "LAN_RESET#";
+		};
+
+		/* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */
+		npwe-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "Tri-state nPWE";
+		};
+
+		/* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */
+		rdnwr-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "Not tri-state RDnWR";
+		};
+	};
+
 	pinmux@70000014 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -420,19 +445,21 @@
 
 	tegra_ac97: ac97@70002000 {
 		status = "okay";
-		nvidia,codec-reset-gpio =
-			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
-		nvidia,codec-sync-gpio =
+		nvidia,codec-reset-gpios =
+			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+		nvidia,codec-sync-gpios =
 			<&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
 	};
 
 	serial@70006040 {
 		compatible = "nvidia,tegra20-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra20-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 	};
 
@@ -705,12 +732,16 @@
 		vbus-supply = <&reg_lan_v_bus>;
 	};
 
-	clk32k_in: xtal3 {
+	clk32k_in: clock-xtal3 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 	};
 
+	opp-table-emc {
+		/delete-node/ opp-760000000;
+	};
+
 	reg_lan_v_bus: regulator-lan-v-bus {
 		compatible = "regulator-fixed";
 		regulator-name = "LAN_V_BUS";
@@ -745,32 +776,3 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };
-
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp-760000000;
-};
-
-&gpio {
-	lan-reset-n-hog {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LAN_RESET#";
-	};
-
-	/* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */
-	npwe-hog {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "Tri-state nPWE";
-	};
-
-	/* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */
-	rdnwr-hog {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "Not tri-state RDnWR";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/nvidia/tegra20-cpu-opp-microvolt.dtsi
index 7330c1b13d93..7330c1b13d93 100644
--- a/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra20-cpu-opp-microvolt.dtsi
diff --git a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi b/arch/arm/boot/dts/nvidia/tegra20-cpu-opp.dtsi
index 47c8e78ca958..47c8e78ca958 100644
--- a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra20-cpu-opp.dtsi
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/nvidia/tegra20-harmony.dts
index 11f21aeba8e9..5c31a6c8dabe 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-harmony.dts
@@ -273,6 +273,8 @@
 	};
 
 	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/nvidia/tegra20-medcom-wide.dts
index f144487c5da3..8c657182fff3 100644
--- a/arch/arm/boot/dts/tegra20-medcom-wide.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-medcom-wide.dts
@@ -15,10 +15,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	pwm@7000a000 {
-		status = "okay";
-	};
-
 	host1x@50000000 {
 		dc@54200000 {
 			rgb {
@@ -28,6 +24,10 @@
 		};
 	};
 
+	pwm@7000a000 {
+		status = "okay";
+	};
+
 	i2c@7000c000 {
 		wm8903: wm8903@1a {
 			compatible = "wlf,wm8903";
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/nvidia/tegra20-paz00.dts
index 48fe628c6d87..1408e1e00759 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-paz00.dts
@@ -279,10 +279,14 @@
 	};
 
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
 	serial@70006200 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -307,67 +311,19 @@
 		clock-frequency = <100000>;
 	};
 
-	nvec@7000c500 {
+	i2c@7000c500 {
 		compatible = "nvidia,nvec";
-		reg = <0x7000c500 0x100>;
-		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+
+		/delete-property/ #address-cells;
+		/delete-property/ #size-cells;
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+
 		clock-frequency = <80000>;
 		request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
 		slave-addr = <138>;
-		clocks = <&tegra_car TEGRA20_CLK_I2C3>,
-			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 67>;
-		reset-names = "i2c";
-	};
-
-	memory-controller@7000f400 {
-		nvidia,use-ram-code;
-
-		emc-tables@0 {
-			nvidia,ram-code = <0x0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			emc-table@166500 {
-				reg = <166500>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <166500>;
-				nvidia,emc-registers = <0x0000000a 0x00000016
-					0x00000008 0x00000003 0x00000004 0x00000004
-					0x00000002 0x0000000c 0x00000003 0x00000003
-					0x00000002 0x00000001 0x00000004 0x00000005
-					0x00000004 0x00000009 0x0000000d 0x000004df
-					0x00000000 0x00000003 0x00000003 0x00000003
-					0x00000003 0x00000001 0x0000000a 0x000000c8
-					0x00000003 0x00000006 0x00000004 0x00000008
-					0x00000002 0x00000000 0x00000000 0x00000002
-					0x00000000 0x00000000 0x00000083 0xe03b0323
-					0x007fe010 0x00001414 0x00000000 0x00000000
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
 
-			emc-table@333000 {
-				reg = <333000>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <333000>;
-				nvidia,emc-registers = <0x00000018 0x00000033
-					0x00000012 0x00000004 0x00000004 0x00000005
-					0x00000003 0x0000000c 0x00000006 0x00000006
-					0x00000003 0x00000001 0x00000004 0x00000005
-					0x00000004 0x00000009 0x0000000d 0x00000bff
-					0x00000000 0x00000003 0x00000003 0x00000006
-					0x00000006 0x00000001 0x00000011 0x000000c8
-					0x00000003 0x0000000e 0x00000007 0x00000008
-					0x00000002 0x00000000 0x00000000 0x00000002
-					0x00000000 0x00000000 0x00000083 0xf0440303
-					0x007fe010 0x00001414 0x00000000 0x00000000
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-		};
+		status = "okay";
 	};
 
 	i2c@7000d000 {
@@ -532,6 +488,96 @@
 		core-supply = <&core_vdd_reg>;
 	};
 
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@0 {
+			nvidia,ram-code = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			emc-table@166500 {
+				reg = <166500>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <166500>;
+				nvidia,emc-registers = <0x0000000a 0x00000016
+					0x00000008 0x00000003 0x00000004 0x00000004
+					0x00000002 0x0000000c 0x00000003 0x00000003
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x000004df
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000003 0x00000001 0x0000000a 0x000000c8
+					0x00000003 0x00000006 0x00000004 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xe03b0323
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@333000 {
+				reg = <333000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <333000>;
+				nvidia,emc-registers = <0x00000018 0x00000033
+					0x00000012 0x00000004 0x00000004 0x00000005
+					0x00000003 0x0000000c 0x00000006 0x00000006
+					0x00000003 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x00000bff
+					0x00000000 0x00000003 0x00000003 0x00000006
+					0x00000006 0x00000001 0x00000011 0x000000c8
+					0x00000003 0x0000000e 0x00000007 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xf0440303
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+
+		emc-tables@1 {
+			nvidia,ram-code = <0x1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			emc-table@166500 {
+				reg = <166500>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <166500>;
+				nvidia,emc-registers = <0x0000000a 0x00000016
+					0x00000008 0x00000003 0x00000004 0x00000004
+					0x00000002 0x0000000c 0x00000003 0x00000003
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x000004df
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000003 0x00000001 0x0000000a 0x000000c8
+					0x00000003 0x00000006 0x00000004 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xe03b0323
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@333000 {
+				reg = <333000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <333000>;
+				nvidia,emc-registers = <0x00000018 0x00000033
+					0x00000012 0x00000004 0x00000004 0x00000005
+					0x00000003 0x0000000c 0x00000006 0x00000006
+					0x00000003 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x00000bff
+					0x00000000 0x00000003 0x00000003 0x00000006
+					0x00000006 0x00000001 0x00000011 0x000000c8
+					0x00000003 0x0000000e 0x00000007 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xf0440303
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+	};
+
 	usb@c5000000 {
 		compatible = "nvidia,tegra20-udc";
 		status = "okay";
@@ -593,6 +639,20 @@
 		#clock-cells = <0>;
 	};
 
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&cpu_vdd_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&cpu_vdd_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -614,6 +674,10 @@
 		};
 	};
 
+	opp-table-emc {
+		/delete-node/ opp-760000000;
+	};
+
 	panel: panel {
 		compatible = "samsung,ltn101nt05";
 
@@ -668,20 +732,6 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
-	cpus {
-		cpu0: cpu@0 {
-			cpu-supply = <&cpu_vdd_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-		};
-
-		cpu1: cpu@1 {
-			cpu-supply = <&cpu_vdd_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-		};
-	};
-
 	thermal-zones {
 		cpu-thermal {
 			polling-delay-passive = <500>; /* milliseconds */
@@ -715,7 +765,3 @@
 		};
 	};
 };
-
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp-760000000;
-};
diff --git a/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi b/arch/arm/boot/dts/nvidia/tegra20-peripherals-opp.dtsi
index 1b808233a933..1b808233a933 100644
--- a/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra20-peripherals-opp.dtsi
diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/nvidia/tegra20-plutux.dts
index 71a8236491df..71a8236491df 100644
--- a/arch/arm/boot/dts/tegra20-plutux.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-plutux.dts
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/nvidia/tegra20-seaboard.dts
index 5b4c5ef30996..e944ae9b86c2 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-seaboard.dts
@@ -285,7 +285,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -296,25 +296,25 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
+				nvidia,function = "rsvd4";
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
+				nvidia,function = "i2c2";
 			};
 		};
 	};
@@ -324,6 +324,8 @@
 	};
 
 	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -370,38 +372,6 @@
 		clock-frequency = <100000>;
 	};
 
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@7000c400}>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		lvds_ddc: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			smart-battery@b {
-				compatible = "ti,bq20z75", "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,i2c-retry-count = <2>;
-				sbs,poll-retry-count = <10>;
-			};
-		};
-	};
-
 	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <400000>;
@@ -817,6 +787,38 @@
 		};
 	};
 
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smart-battery@b {
+				compatible = "ti,bq20z75", "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,i2c-retry-count = <2>;
+				sbs,poll-retry-count = <10>;
+			};
+		};
+	};
+
 	panel: panel {
 		compatible = "chunghwa,claa101wa01a";
 
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/nvidia/tegra20-tamonten.dtsi
index 0e19bd0a847c..5c214dd060bb 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra20-tamonten.dtsi
@@ -249,7 +249,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -260,25 +260,25 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
+				nvidia,function = "rsvd4";
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
+				nvidia,function = "i2c2";
 			};
 		};
 	};
@@ -288,6 +288,8 @@
 	};
 
 	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -301,31 +303,6 @@
 		status = "okay";
 	};
 
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@7000c400}>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
 	i2c@7000d000 {
 		clock-frequency = <400000>;
 		status = "okay";
@@ -509,6 +486,31 @@
 		#clock-cells = <0>;
 	};
 
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	pci_vdd_reg: regulator-1v05 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v05";
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/nvidia/tegra20-tec.dts
index 4f41c74384b2..4f41c74384b2 100644
--- a/arch/arm/boot/dts/tegra20-tec.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-tec.dts
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts
index dc51835423a9..4caeeb9f1e1d 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include "tegra20.dtsi"
 #include "tegra20-cpu-opp.dtsi"
 
@@ -201,16 +202,17 @@
 			conf_ata {
 				nvidia,pins = "ata", "atc", "atd", "ate",
 					"crtp", "dap2", "dap3", "dap4", "dta",
-					"dtb", "dtc", "dtd", "dte", "gmb",
-					"gme", "i2cp", "pta", "slxc", "slxd",
-					"spdi", "spdo", "uda";
+					"dtb", "dtc", "dtd", "gmb", "gme",
+					"i2cp", "pta", "slxc", "slxd", "spdi",
+					"spdo", "uda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
 			conf_atb {
 				nvidia,pins = "atb", "cdev1", "cdev2", "dap1",
-					"gma", "gmc", "gmd", "gpu", "gpu7",
-					"gpv", "sdio1", "slxa", "slxk", "uac";
+					"dte", "gma", "gmc", "gmd", "gpu",
+					"gpu7", "gpv", "sdio1", "slxa", "slxk",
+					"uac";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
@@ -276,6 +278,8 @@
 	};
 
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -385,6 +389,16 @@
 		#clock-cells = <0>;
 	};
 
+	cpus {
+		cpu0: cpu@0 {
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@1 {
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -396,6 +410,24 @@
 		};
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		led-ds2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+			gpios = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		led-ds3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+			gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	poweroff {
 		compatible = "gpio-poweroff";
 		gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
@@ -462,14 +494,4 @@
 			 <&tegra_car TEGRA20_CLK_CDEV1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
-
-	cpus {
-		cpu0: cpu@0 {
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@1 {
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/nvidia/tegra20-ventana.dts
index caa17e876e41..f3273941437c 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-ventana.dts
@@ -284,7 +284,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -295,25 +295,25 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
+				nvidia,function = "rsvd4";
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
+				nvidia,function = "i2c2";
 			};
 		};
 	};
@@ -323,6 +323,8 @@
 	};
 
 	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -362,31 +364,6 @@
 		clock-frequency = <100000>;
 	};
 
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@7000c400}>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		lvds_ddc: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
 	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <400000>;
@@ -636,6 +613,31 @@
 		};
 	};
 
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	panel: panel {
 		compatible = "chunghwa,claa101wa01a";
 
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/nvidia/tegra20.dtsi
index 62bf0b306472..882adb7f2f26 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra20.dtsi
@@ -284,7 +284,7 @@
 		reg = <0x60007000 0x1000>;
 	};
 
-	apbdma: dma@6000a000 {
+	apbdma: dma-controller@6000a000 {
 		compatible = "nvidia,tegra20-apbdma";
 		reg = <0x6000a000 0x1200>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -356,12 +356,6 @@
 		operating-points-v2 = <&vde_dvfs_opp_table>;
 	};
 
-	apbmisc@70000800 {
-		compatible = "nvidia,tegra20-apbmisc";
-		reg = <0x70000800 0x64>, /* Chip revision */
-		      <0x70000008 0x04>; /* Strapping options */
-	};
-
 	pinmux: pinmux@70000014 {
 		compatible = "nvidia,tegra20-pinmux";
 		reg = <0x70000014 0x10>, /* Tri-state registers */
@@ -370,6 +364,12 @@
 		      <0x70000868 0xa8>; /* Pad control registers */
 	};
 
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64>, /* Chip revision */
+		      <0x70000008 0x04>; /* Strapping options */
+	};
+
 	das@70000c00 {
 		compatible = "nvidia,tegra20-das";
 		reg = <0x70000c00 0x80>;
@@ -442,7 +442,6 @@
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_UARTA>;
 		resets = <&tegra_car 6>;
-		reset-names = "serial";
 		dmas = <&apbdma 8>, <&apbdma 8>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -455,7 +454,6 @@
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_UARTB>;
 		resets = <&tegra_car 7>;
-		reset-names = "serial";
 		dmas = <&apbdma 9>, <&apbdma 9>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -468,7 +466,6 @@
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_UARTC>;
 		resets = <&tegra_car 55>;
-		reset-names = "serial";
 		dmas = <&apbdma 10>, <&apbdma 10>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -481,7 +478,6 @@
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_UARTD>;
 		resets = <&tegra_car 65>;
-		reset-names = "serial";
 		dmas = <&apbdma 19>, <&apbdma 19>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -494,7 +490,6 @@
 		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_UARTE>;
 		resets = <&tegra_car 66>;
-		reset-names = "serial";
 		dmas = <&apbdma 20>, <&apbdma 20>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -542,13 +537,6 @@
 		status = "disabled";
 	};
 
-	rtc@7000e000 {
-		compatible = "nvidia,tegra20-rtc";
-		reg = <0x7000e000 0x100>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_RTC>;
-	};
-
 	i2c@7000c000 {
 		compatible = "nvidia,tegra20-i2c";
 		reg = <0x7000c000 0x100>;
@@ -683,6 +671,13 @@
 		status = "disabled";
 	};
 
+	rtc@7000e000 {
+		compatible = "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_RTC>;
+	};
+
 	kbc@7000e200 {
 		compatible = "nvidia,tegra20-kbc";
 		reg = <0x7000e200 0x100>;
@@ -706,6 +701,16 @@
 		};
 
 		powergates {
+			pd_mpe: mpe {
+				clocks = <&tegra_car TEGRA20_CLK_MPE>;
+				resets = <&mc TEGRA20_MC_RESET_MPEA>,
+					 <&mc TEGRA20_MC_RESET_MPEB>,
+					 <&mc TEGRA20_MC_RESET_MPEC>,
+					 <&tegra_car TEGRA20_CLK_MPE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
 			pd_3d: td {
 				clocks = <&tegra_car TEGRA20_CLK_GR3D>;
 				resets = <&mc TEGRA20_MC_RESET_3D>,
@@ -714,6 +719,14 @@
 				#power-domain-cells = <0>;
 			};
 
+			pd_vde: vdec {
+				clocks = <&tegra_car TEGRA20_CLK_VDE>;
+				resets = <&mc TEGRA20_MC_RESET_VDE>,
+					 <&tegra_car TEGRA20_CLK_VDE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
 			pd_venc: venc {
 				clocks = <&tegra_car TEGRA20_CLK_ISP>,
 					 <&tegra_car TEGRA20_CLK_VI>,
@@ -726,24 +739,6 @@
 				power-domains = <&pd_core>;
 				#power-domain-cells = <0>;
 			};
-
-			pd_vde: vdec {
-				clocks = <&tegra_car TEGRA20_CLK_VDE>;
-				resets = <&mc TEGRA20_MC_RESET_VDE>,
-					 <&tegra_car TEGRA20_CLK_VDE>;
-				power-domains = <&pd_core>;
-				#power-domain-cells = <0>;
-			};
-
-			pd_mpe: mpe {
-				clocks = <&tegra_car TEGRA20_CLK_MPE>;
-				resets = <&mc TEGRA20_MC_RESET_MPEA>,
-					 <&mc TEGRA20_MC_RESET_MPEB>,
-					 <&mc TEGRA20_MC_RESET_MPEC>,
-					 <&tegra_car TEGRA20_CLK_MPE>;
-				power-domains = <&pd_core>;
-				#power-domain-cells = <0>;
-			};
 		};
 	};
 
@@ -1049,13 +1044,13 @@
 		simple-audio-card,dai-link@0 {
 			reg = <0>;
 
-			cpu {
-				sound-dai = <&tegra_spdif>;
-			};
-
 			codec {
 				sound-dai = <&tegra_hdmi>;
 			};
+
+			cpu {
+				sound-dai = <&tegra_spdif>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/nvidia/tegra30-apalis-eval.dts
index ad968ff968d7..ccb9f29c5de3 100644
--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-eval.dts
@@ -47,8 +47,20 @@
 		};
 	};
 
+	gpio@6000d000 {
+		/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+		pex-perst-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PEX_PERST_N";
+		};
+	};
+
 	/* Apalis UART1 */
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -79,11 +91,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		pcie-switch@58 {
-			compatible = "plx,pex8605";
-			reg = <0x58>;
-		};
-
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
 			compatible = "st,m41t0";
@@ -236,13 +243,3 @@
 		vin-supply = <&reg_5v0>;
 	};
 };
-
-&gpio {
-	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n-hog {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PEX_PERST_N";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1-eval.dts
index c172fdb5e1ae..bc353324df43 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1-eval.dts
@@ -48,8 +48,20 @@
 		};
 	};
 
+	gpio@6000d000 {
+		/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+		pex-perst-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PEX_PERST_N";
+		};
+	};
+
 	/* Apalis UART1 */
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -80,11 +92,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		pcie-switch@58 {
-			compatible = "plx,pex8605";
-			reg = <0x58>;
-		};
-
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
 			compatible = "st,m41t0";
@@ -254,13 +261,3 @@
 		vin-supply = <&vddio_sdmmc_1v8_reg>;
 	};
 };
-
-&gpio {
-	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n-hog {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PEX_PERST_N";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
index 380f22a35821..ff0d684622f7 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
@@ -829,16 +829,19 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 	};
 
@@ -993,8 +996,7 @@
 		touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
-			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
-			interrupt-controller;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
@@ -1007,6 +1009,12 @@
 			/* ADC converstion time: 80 clocks */
 			st,sample-time = <4>;
 
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				/* forbid to use ADC channels 3-0 (touch) */
+				st,norequest-mask = <0x0F>;
+			};
+
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
 				/* 8 sample average control */
@@ -1023,12 +1031,6 @@
 				/* 5 ms touch detect interrupt delay */
 				st,touch-det-delay = <5>;
 			};
-
-			stmpe_adc {
-				compatible = "st,stmpe-adc";
-				/* forbid to use ADC channels 3-0 (touch) */
-				st,norequest-mask = <0x0F>;
-			};
 		};
 
 		/*
@@ -1122,16 +1124,16 @@
 		mmc-ddr-1_8v;
 	};
 
-	clk32k_in: xtal1 {
+	clk16m: clock-osc4 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
+		clock-frequency = <16000000>;
 	};
 
-	clk16m: osc4 {
+	clk32k_in: clock-xtal1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <16000000>;
+		clock-frequency = <32768>;
 	};
 
 	reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
index 9bdc4cb71449..d38f1dd38a90 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
@@ -820,16 +820,19 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 	};
 
@@ -976,8 +979,7 @@
 		touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
-			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
-			interrupt-controller;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
@@ -990,6 +992,12 @@
 			/* ADC converstion time: 80 clocks */
 			st,sample-time = <4>;
 
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				/* forbid to use ADC channels 3-0 (touch) */
+				st,norequest-mask = <0x0F>;
+			};
+
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
 				/* 8 sample average control */
@@ -1006,12 +1014,6 @@
 				/* 5 ms touch detect interrupt delay */
 				st,touch-det-delay = <5>;
 			};
-
-			stmpe_adc {
-				compatible = "st,stmpe-adc";
-				/* forbid to use ADC channels 3-0 (touch) */
-				st,norequest-mask = <0x0F>;
-			};
 		};
 
 		/*
@@ -1105,16 +1107,16 @@
 		mmc-ddr-1_8v;
 	};
 
-	clk32k_in: xtal1 {
+	clk16m: clock-osc4 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
+		clock-frequency = <16000000>;
 	};
 
-	clk16m: osc4 {
+	clk32k_in: clock-xtal1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <16000000>;
+		clock-frequency = <32768>;
 	};
 
 	reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
diff --git a/arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-lvds-display.dtsi
index a047abfa6369..680edff0f26f 100644
--- a/arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-lvds-display.dtsi
@@ -2,13 +2,15 @@
 
 /* This dtsi file describes parts common for Asus T30 devices with a LVDS panel. */
 
+#include <dt-bindings/gpio/tegra-gpio.h>
+
 / {
 	host1x@50000000 {
 		lcd: dc@54200000 {
 			rgb {
 				status = "okay";
 
-				port@0 {
+				port {
 					dpi_output: endpoint {
 						remote-endpoint = <&bridge_input>;
 						bus-width = <24>;
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-E1565.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-E1565.dts
index a25b8560b0cd..a25b8560b0cd 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-E1565.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-E1565.dts
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-PM269.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-PM269.dts
index 06ef13ea5df8..06ef13ea5df8 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-PM269.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-PM269.dts
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-common.dtsi
index ee683c5a9c62..15f53babdc21 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-common.dtsi
@@ -29,6 +29,14 @@
 	 */
 	chosen {};
 
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <0x0>;
+			tlm,version-minor = <0x0>;
+		};
+	};
+
 	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
@@ -61,6 +69,12 @@
 	};
 
 	gpio@6000d000 {
+		init-low-power-mode-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
 		init-mode-hog {
 			gpio-hog;
 			gpios = <TEGRA_GPIO(DD, 7) GPIO_ACTIVE_HIGH>,
@@ -68,12 +82,6 @@
 				<TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
 			output-low;
 		};
-
-		init-low-power-mode-hog {
-			gpio-hog;
-			gpios = <TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
-			input;
-		};
 	};
 
 	pinmux@70000868 {
@@ -790,12 +798,14 @@
 
 	uartb: serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 		/* GPS BCM4751 */
 	};
 
 	uartc: serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 		status = "okay";
 
@@ -905,6 +915,9 @@
 			reg = <0x1c>;
 
 			realtek,dmic1-data-pin = <1>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			clock-names = "mclk";
 		};
 
 		nct72: temperature-sensor@4c {
@@ -977,17 +990,6 @@
 		};
 	};
 
-	brcm_wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-
-		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
-		clock-names = "ext_clock";
-
-		reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>;
-		post-power-on-delay-ms = <300>;
-		power-off-delay-us = <300>;
-	};
-
 	sdmmc3: mmc@78000400 {
 		status = "okay";
 
@@ -1093,15 +1095,11 @@
 
 	display-panel {
 		/*
-		 * Nexus 7 supports two compatible panel models:
-		 *
-		 *  1. hydis,hv070wx2-1e0
-		 *  2. chunghwa,claa070wp03xg
-		 *
-		 * We want to use timing which is optimized for Nexus 7,
-		 * hence we need to customize the timing.
+		 * Some device variants come with a Hydis HV070WX2-1E0, but
+		 * since they are all largely compatible, we'll go with the
+		 * Chunghwa one here.
 		 */
-		compatible = "panel-lvds";
+		compatible = "chunghwa,claa070wp03xg", "panel-lvds";
 
 		width-mm = <94>;
 		height-mm = <150>;
@@ -1113,27 +1111,9 @@
 		/delete-property/ ddc-i2c-bus;
 	};
 
-	firmware {
-		trusted-foundations {
-			compatible = "tlm,trusted-foundations";
-			tlm,version-major = <0x0>;
-			tlm,version-minor = <0x0>;
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		switch-hall-sensor {
-			label = "Lid";
-			gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LID>;
-			debounce-interval = <500>;
-			wakeup-event-action = <EV_ACT_DEASSERTED>;
-			wakeup-source;
-		};
-
 		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
@@ -1143,6 +1123,15 @@
 			wakeup-source;
 		};
 
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
 		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
@@ -1152,16 +1141,28 @@
 			wakeup-source;
 		};
 
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
+		switch-hall-sensor {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
 			wakeup-source;
 		};
 	};
 
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
 	vdd_5v0_sys: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
index cd28e8782f7d..694c7fe37eb8 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
@@ -22,13 +22,6 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&max77620_default>;
 
-			max77620_default: pinmux {
-				gpio4 {
-					pins = "gpio4";
-					function = "32k-out1";
-				};
-			};
-
 			cpu-pwr-req-hog {
 				gpio-hog;
 				gpios = <6 GPIO_ACTIVE_HIGH>;
@@ -49,6 +42,13 @@
 				};
 			};
 
+			max77620_default: pinmux {
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+			};
+
 			regulators {
 				in-sd0-supply = <&vdd_5v0_sys>;
 				in-sd1-supply = <&vdd_5v0_sys>;
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-memory-timings.dtsi
index 6c229e1d67e7..8944a4a5a8d7 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-memory-timings.dtsi
@@ -1562,16 +1562,16 @@
 			};
 		};
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp-750000000-1300;
-	/delete-node/ opp-800000000-1300;
-	/delete-node/ opp-900000000-1350;
-};
+	opp-table-actmon {
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
 
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp-750000000;
-	/delete-node/ opp-800000000;
-	/delete-node/ opp-900000000;
+	opp-table-emc {
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
index ee4a3f482769..ee4a3f482769 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper.dtsi
index 564cfcde21a9..c19a0419112a 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper.dtsi
@@ -6,20 +6,6 @@
 / {
 	compatible = "asus,grouper", "nvidia,tegra30";
 
-	display-panel {
-		panel-timing {
-			clock-frequency = <68000000>;
-			hactive = <800>;
-			vactive = <1280>;
-			hfront-porch = <24>;
-			hback-porch = <32>;
-			hsync-len = <24>;
-			vsync-len = <1>;
-			vfront-porch = <5>;
-			vback-porch = <32>;
-		};
-	};
-
 	pinmux@70000868 {
 		state_default: pinmux {
 			lcd_dc1_pd2 {
@@ -145,4 +131,18 @@
 			firmware-gpios = <&gpio TEGRA_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	display-panel {
+		panel-timing {
+			clock-frequency = <68000000>;
+			hactive = <800>;
+			vactive = <1280>;
+			hfront-porch = <24>;
+			hback-porch = <32>;
+			hsync-len = <24>;
+			vsync-len = <1>;
+			vfront-porch = <5>;
+			vback-porch = <32>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-E1565.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia-E1565.dts
index f1c63feb4af9..f1c63feb4af9 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-E1565.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia-E1565.dts
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-memory-timings.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia-memory-timings.dtsi
index 9169de34fa00..9169de34fa00 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-memory-timings.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia-memory-timings.dtsi
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia.dtsi
index 1b241f0542b8..94c80134574e 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia.dtsi
@@ -6,22 +6,6 @@
 / {
 	compatible = "asus,tilapia", "asus,grouper", "nvidia,tegra30";
 
-	display-panel {
-		enable-gpios = <&gpio TEGRA_GPIO(V, 6) GPIO_ACTIVE_HIGH>;
-
-		panel-timing {
-			clock-frequency = <81750000>;
-			hactive = <800>;
-			vactive = <1280>;
-			hfront-porch = <64>;
-			hback-porch = <128>;
-			hsync-len = <64>;
-			vsync-len = <1>;
-			vfront-porch = <5>;
-			vback-porch = <2>;
-		};
-	};
-
 	gpio@6000d000 {
 		init-mode-3g-hog {
 			gpio-hog;
@@ -230,4 +214,20 @@
 			firmware-gpios = <&gpio TEGRA_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	display-panel {
+		enable-gpios = <&gpio TEGRA_GPIO(V, 6) GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <81750000>;
+			hactive = <800>;
+			vactive = <1280>;
+			hfront-porch = <64>;
+			hback-porch = <128>;
+			hsync-len = <64>;
+			vsync-len = <1>;
+			vfront-porch = <5>;
+			vback-porch = <2>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-p1801-t.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-p1801-t.dts
new file mode 100644
index 000000000000..9241cc269a89
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-p1801-t.dts
@@ -0,0 +1,2087 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "Asus Portable AiO P1801-T";
+	compatible = "asus,p1801-t", "nvidia,tegra30";
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* uSD slot */
+		mmc2 = &sdmmc3; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		display0 = &hdmi;
+
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;		/* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		framebuffer@abe01000 {
+			reg = <0xabe01000 (1920 * 1080 * 4)>;
+			no-map;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;	/* 2MB */
+			no-map;
+		};
+
+		ramoops@fea00000 {
+			compatible = "ramoops";
+			reg = <0xfea00000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi: hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&hdmi_5v0_sys>;
+			pll-supply = <&vdd_1v8_vio>;
+			vdd-supply = <&vdd_3v3_sys>;
+
+			port {
+				hdmi_out: endpoint {
+					remote-endpoint = <&bridge_in>;
+				};
+			};
+		};
+	};
+
+	gpio@6000d000 {
+		init-lpm-in-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		init-lpm-out-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(K, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+
+		tp-vendor-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+			input;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* SDMMC1 pinmux */
+			sdmmc1-clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cmd {
+				nvidia,pins = "sdmmc1_dat3_py4",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cd {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-wp {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC2 pinmux */
+			vi-d1-pd5 {
+				nvidia,pins = "vi_d1_pd5",
+					      "vi_d2_pl0",
+					      "vi_d3_pl1",
+					      "vi_d5_pl3",
+					      "vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi-d8-pl6 {
+				nvidia,pins = "vi_d8_pl6",
+					      "vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* SDMMC3 pinmux */
+			sdmmc3-clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-cmd {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "sdmmc3_dat4_pd1",
+					      "sdmmc3_dat5_pd0",
+					      "sdmmc3_dat6_pd3",
+					      "sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC4 pinmux */
+			sdmmc4-clk {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-cmd {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+					      "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-rst-n {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam-mclk {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			drive-sdmmc4 {
+				nvidia,pins = "drive_gma",
+					      "drive_gmb",
+					      "drive_gmc",
+					      "drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			/* I2C pinmux */
+			gen1-i2c {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			gen2-i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			cam-i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			ddc-i2c {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			pwr-i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			hotplug-i2c {
+				nvidia,pins = "pu4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* HDMI pinmux */
+			hdmi-cec {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			hdmi-hpd {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-A */
+			ulpi-data0-po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data1-po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-data5-po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-data7-po0 {
+				nvidia,pins = "ulpi_data7_po0",
+					      "ulpi_data2_po3",
+					      "ulpi_data3_po4",
+					      "ulpi_data4_po5",
+					      "ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-B */
+			uartb-txd-rts {
+				nvidia,pins = "uart2_txd_pc2",
+					      "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uartb-rxd-cts {
+				nvidia,pins = "uart2_rxd_pc3",
+					      "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-C */
+			uartc-rxd-cts {
+				nvidia,pins = "uart3_cts_n_pa1",
+					      "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartc-txd-rts {
+				nvidia,pins = "uart3_rts_n_pc0",
+					      "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-D */
+			ulpi-nxt-py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-clk-py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_dir_py1",
+					      "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* I2S pinmux */
+			dap-i2s0 {
+				nvidia,pins = "dap1_fs_pn0",
+					      "dap1_din_pn1",
+					      "dap1_dout_pn2",
+					      "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s1 {
+				nvidia,pins = "dap2_fs_pa2",
+					      "dap2_sclk_pa3",
+					      "dap2_din_pa4",
+					      "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-fs {
+				nvidia,pins = "dap3_fs_pp0",
+					      "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-dout {
+				nvidia,pins = "dap3_dout_pp2",
+					      "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s3 {
+				nvidia,pins = "dap4_fs_pp4",
+					      "dap4_din_pp5",
+					      "dap4_dout_pp6",
+					      "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* sensors pinmux */
+			nct-irq {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Asus EC pinmux */
+			ec-irqs {
+				nvidia,pins = "kb_row10_ps2",
+					      "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ec-reqs {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* memory type bootstrap */
+			mem-boostraps {
+				nvidia,pins = "gmi_ad4_pg4",
+					      "gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PCI-e pinmux */
+			pex-l2-rst-n {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+					      "pex_l0_rst_n_pdd1",
+					      "pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex-l2-clkreq-n {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7",
+					      "pex_l0_prsnt_n_pdd0",
+					      "pex_l0_clkreq_n_pdd2",
+					      "pex_wake_n_pdd3",
+					      "pex_l1_prsnt_n_pdd4",
+					      "pex_l1_clkreq_n_pdd6",
+					      "pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SPI pinmux */
+			spi1-mosi-px4 {
+				nvidia,pins = "spi1_mosi_px4",
+					      "spi1_sck_px5",
+					      "spi1_cs0_n_px6",
+					      "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2-cs1-n-pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2-sck-px2 {
+				nvidia,pins = "spi2_sck_px2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi-a17-pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+					      "gmi_a16_pj7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-a18-pb1 {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi-a19-pk7 {
+				nvidia,pins = "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Display A pinmux */
+			lcd-pwr0-pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+					      "lcd_pclk_pb3",
+					      "lcd_pwr1_pc1",
+					      "lcd_d0_pe0",
+					      "lcd_d1_pe1",
+					      "lcd_d2_pe2",
+					      "lcd_d3_pe3",
+					      "lcd_d4_pe4",
+					      "lcd_d5_pe5",
+					      "lcd_d6_pe6",
+					      "lcd_d7_pe7",
+					      "lcd_d8_pf0",
+					      "lcd_d9_pf1",
+					      "lcd_d10_pf2",
+					      "lcd_d11_pf3",
+					      "lcd_d12_pf4",
+					      "lcd_d13_pf5",
+					      "lcd_d14_pf6",
+					      "lcd_d15_pf7",
+					      "lcd_de_pj1",
+					      "lcd_hsync_pj3",
+					      "lcd_vsync_pj4",
+					      "lcd_d16_pm0",
+					      "lcd_d17_pm1",
+					      "lcd_d18_pm2",
+					      "lcd_d19_pm3",
+					      "lcd_d20_pm4",
+					      "lcd_d21_pm5",
+					      "lcd_d22_pm6",
+					      "lcd_d23_pm7",
+					      "lcd_dc0_pn6",
+					      "lcd_sdin_pz2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-cs0-n-pn4 {
+				nvidia,pins = "lcd_cs0_n_pn4",
+					      "lcd_sdout_pn5",
+					      "lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			blink {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* KBC keys */
+			kb-col0-pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col1-pq1 {
+				nvidia,pins = "kb_row1_pr1",
+					      "kb_row3_pr3",
+					      "kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb-col4-pq4 {
+				nvidia,pins = "kb_col4_pq4",
+					      "kb_col5_pq5",
+					      "kb_col7_pq7",
+					      "kb_row2_pr2",
+					      "kb_row4_pr4",
+					      "kb_row5_pr5",
+					      "kb_row12_ps4",
+					      "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-wp-n-pc7 {
+				nvidia,pins = "gmi_wp_n_pc7",
+					      "gmi_wait_pi7",
+					      "gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs0-n-pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0",
+					      "gmi_cs1_n_pj2",
+					      "gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi-pclk-pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* GPIO keys pinmux */
+			power-key {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vol-keys {
+				nvidia,pins = "kb_col2_pq2",
+					      "kb_col3_pq3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Bluetooth */
+			bt-shutdown {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			bt-dev-wake {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt-host-wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi-vsync-pd6 {
+				nvidia,pins = "vi_vsync_pd6",
+					      "vi_hsync_pd7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+			vi-d10-pt2 {
+				nvidia,pins = "vi_d10_pt2",
+					      "vi_d0_pt4",
+					      "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad0-pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+					      "gmi_ad1_pg1",
+					      "gmi_ad2_pg2",
+					      "gmi_ad3_pg3",
+					      "gmi_ad6_pg6",
+					      "gmi_ad7_pg7",
+					      "gmi_wr_n_pi0",
+					      "gmi_oe_n_pi1",
+					      "gmi_dqs_pi2",
+					      "gmi_adv_n_pk0",
+					      "gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad13-ph5 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi-ad10-ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+					      "gmi_ad11_ph3",
+					      "gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad12-ph4 {
+				nvidia,pins = "gmi_ad12_ph4",
+					      "gmi_rst_n_pi4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* USB2 VBUS control */
+			usb2-vbus-control {
+				nvidia,pins = "gmi_ad15_ph7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PWM pinmux */
+			pwm-0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwm-2 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* S/PDIF pinmux */
+			spdif-out {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif-in {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi-d4-pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi-d6-pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+			vi-mclk-pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag-rtck {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt-hsync-pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+					      "crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1-out {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2-out {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3-out {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sys-clk-req {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2-req-pcc5 {
+				nvidia,pins = "clk2_req_pcc5",
+					      "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3-req-pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* P1801-T specific pinmux */
+			lcd-pwr2 {
+				nvidia,pins = "lcd_pwr2_pc6",
+					      "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-m1 {
+				nvidia,pins = "lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			key-mode {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			splashtop {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "nand_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			w8-detect {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "nand_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2-mosi-px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			tp-vendor {
+				nvidia,pins = "kb_row6_pr6",
+					      "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			tp-power {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive-dap1 {
+				nvidia,pins = "drive_dap1",
+					      "drive_dap2",
+					      "drive_dbg",
+					      "drive_at5",
+					      "drive_gme",
+					      "drive_ddc",
+					      "drive_ao1",
+					      "drive_uart3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive-sdio1 {
+				nvidia,pins = "drive_sdio1",
+					      "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+		};
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Broadcom GPS BCM47511 */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Azurewave AW-AH691 BCM43241B0 */
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <280000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Nuvoton NPCE791LA0DX embedded controller */
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		accelerometer@f {
+			compatible = "kionix,kxtf9";
+			reg = <0x0f>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 5) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&vdd_1v8_vio>;
+			vddio-supply = <&vdd_1v8_vio>;
+
+			mount-matrix = "0", "1", "0",
+				       "1", "0", "0",
+				       "0", "0", "1";
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <33000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		rt5640: audio-codec@1c {
+			compatible = "realtek,rt5640";
+			reg = <0x1c>;
+
+			realtek,dmic1-data-pin = <1>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			clock-names = "mclk";
+
+			realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(BB, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		/* Texas Instruments TPS659110 PMIC */
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_bat>;
+			vcc2-supply = <&vdd_5v0_bat>;
+			vcc3-supply = <&vdd_1v8_vio>;
+			vcc4-supply = <&vdd_5v0_bat>;
+			vcc5-supply = <&vdd_5v0_bat>;
+			vcc6-supply = <&vddio_ddr>;
+			vcc7-supply = <&vdd_5v0_bat>;
+			vccio-supply = <&vdd_5v0_bat>;
+
+			pmic-sleep-hog {
+				gpio-hog;
+				gpios = <2 GPIO_ACTIVE_HIGH>;
+				output-high;
+			};
+
+			regulators {
+				/* vdd1 is not used by Portable AiO */
+
+				vddio_ddr: vdd2 {
+					regulator-name = "vddio_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <1>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8_vio: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* eMMC VDD */
+				vcore_emmc: ldo1 {
+					regulator-name = "vdd_emmc_core";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* uSD slot VDD */
+				vdd_usd: ldo2 {
+					regulator-name = "vdd_usd";
+					regulator-min-microvolt = <3100000>;
+					regulator-max-microvolt = <3100000>;
+					regulator-always-on;
+				};
+
+				/* uSD slot VDDIO */
+				vddio_usd: ldo3 {
+					regulator-name = "vddio_usd";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3100000>;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/* ldo5 is not used by Portable AiO */
+
+				ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+			};
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		vdd_core: core-regulator@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1770000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,enable-vout-discharge;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	vdd_5v0_bat: regulator-bat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ac_bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_cp: regulator-sby {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sby";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_5v0_sys: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_1v5_ddr: regulator-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_3v3_sys: regulator-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_3v3_com: regulator-com {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	usb2_vbus: regulator-usb2 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	hdmi_5v0_sys: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x81>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-3 {
+			/* Micron 2GB 800MHz */
+			nvidia,ram-code = <3>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00030003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x75830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74630303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x73c30504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x73840a06 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x0000000c 0xc0000048
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000005 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000d0709 0x7086120a 0x001f0000 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emem-configuration = < 0x00000018 0xc0000090
+					0x00000004 0x00000005 0x00000013 0x0000000c
+					0x0000000b 0x00000002 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00160d13 0x712c2414 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-3 {
+			/* Micron 2GB 800MHz */
+			nvidia,ram-code = <3>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000006 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000007 0x00000007
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x0000000d 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000000e 0x0000000e
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001a 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000001c 0x0000001c
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000035 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x00000009
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000038 0x00000038
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000012
+					0x00000066 0x0000000c 0x00000004 0x00000003
+					0x00000008 0x00000002 0x0000000a 0x00000004
+					0x00000004 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000bf0 0x00000000 0x000002fc
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000008 0x0000000f 0x0000006c 0x00000200
+					0x00000004 0x0000000c 0x00000000 0x00000004
+					0x00000005 0x00000c30 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x001d0084
+					0x00008000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0158000c 0xa0f10000 0x00000000
+					0x00000000 0x800018c8 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000025
+					0x000000ce 0x0000001a 0x00000009 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000009
+					0x00000009 0x00000003 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000012 0x00001820 0x00000000 0x00000608
+					0x00000003 0x00000012 0x00000001 0x00000000
+					0x0000000f 0x00000018 0x000000d8 0x00000200
+					0x00000005 0x00000018 0x00000000 0x00000007
+					0x00000008 0x00001860 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf0070191
+					0x00008000 0x0000c00a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x00f0000c 0xa0f10202 0x00000000
+					0x00000000 0x8000308c 0xe8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080400 { /* i2s1 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 { /* i2s3 */
+			status = "okay";
+		};
+	};
+
+	sdmmc1: mmc@78000000 {
+		status = "okay";
+
+		/* SDR104 mode unsupported yet */
+		max-frequency = <104000000>;
+
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+
+		vmmc-supply = <&vdd_usd>;	/* ldo2 */
+		vqmmc-supply = <&vddio_usd>;	/* ldo3 */
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_com>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* Azurewave AW-AH691 BCM43241B0 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+
+		non-removable;
+		mmc-ddr-3_3v;
+
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	/* USB via ASUS connector */
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* mini-USB port */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&usb2_vbus>;
+	};
+
+	/* Full size USB */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_5v0_bat>;
+	};
+
+	pad_battery: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <5136000>;
+		energy-full-design-microwatt-hours = <38000000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	/* Connected to a 18.4" LVDS panel */
+	bridge {
+		compatible = "mstar,tsumu88adt3-lf-1";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "HDMI";
+		type = "a";
+
+		/* low: tablet, high: dock */
+		hpd-gpios = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+		ddc-i2c-bus = <&hdmi_ddc>;
+		ddc-en-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		switch-docking-station-mode {
+			label = "Mode";
+			gpios = <&gpio TEGRA_GPIO(K, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MODE>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	opp-table-actmon {
+		opp-800000000 {
+			opp-supported-hw = <0x0006>;
+		};
+
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		opp-800000000-1300 {
+			opp-supported-hw = <0x0006>;
+		};
+
+		/delete-node/ opp-900000000-1350;
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5640-p1801-t",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "Asus Portable AiO P1801-T RT5642";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Speakers", "SPORP",
+			"Speakers", "SPORN",
+			"Speakers", "SPOLP",
+			"Speakers", "SPOLN",
+			"DMIC1", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5640>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution. The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * the Portable AiO from getting too hot from a user's
+		 * tactile perspective. The CPU zone is intended to
+		 * protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 65C */
+					temperature = <65000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 75C until temperature drops to 74.8C */
+					temperature = <75000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-tf201.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf201.dts
index 315c6dc068c5..0406c5a69c12 100644
--- a/arch/arm/boot/dts/tegra30-asus-tf201.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf201.dts
@@ -605,23 +605,40 @@
 		enable-gpios = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
 		vcc-supply = <&vdd_3v3_sys>;
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp-533000000-1200;
-	/delete-node/ opp-625000000-1200;
-	/delete-node/ opp-625000000-1250;
-	/delete-node/ opp-667000000-1200;
-	/delete-node/ opp-750000000-1300;
-	/delete-node/ opp-800000000-1300;
-	/delete-node/ opp-900000000-1350;
-};
+	opp-table-actmon {
+		/delete-node/ opp-533000000;
+		/delete-node/ opp-625000000;
+		/delete-node/ opp-667000000;
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
 
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp-533000000;
-	/delete-node/ opp-625000000;
-	/delete-node/ opp-667000000;
-	/delete-node/ opp-750000000;
-	/delete-node/ opp-800000000;
-	/delete-node/ opp-900000000;
+	opp-table-emc {
+		/delete-node/ opp-533000000-1200;
+		/delete-node/ opp-625000000-1200;
+		/delete-node/ opp-625000000-1250;
+		/delete-node/ opp-667000000-1200;
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf201",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Prime TF201 RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-asus-tf300t.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf300t.dts
index f47434871a5c..970a1f08dc8c 100644
--- a/arch/arm/boot/dts/tegra30-asus-tf300t.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf300t.dts
@@ -128,8 +128,8 @@
 			micdet-delay = <100>;
 
 			gpio-cfg = <
-				0xffffffff /* don't touch */
-				0xffffffff /* don't touch */
+				0x00000600 /* DMIC_LR, output */
+				0x00000680 /* DMIC_DAT, input */
 				0x00000000 /* Speaker-enable GPIO, output, low */
 				0xffffffff /* don't touch */
 				0xffffffff /* don't touch */
@@ -999,6 +999,18 @@
 		compatible = "innolux,g101ice-l01";
 	};
 
+	opp-table-emc {
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
 	sound {
 		compatible = "asus,tegra-audio-wm8903-tf300t",
 			     "nvidia,tegra-audio-wm8903";
@@ -1011,24 +1023,10 @@
 			"Int Spk", "RON",
 			"Int Spk", "LOP",
 			"Int Spk", "LON",
-			"IN1L", "Mic Jack",
 			"IN2L", "Mic Jack",
 			"DMICDAT", "Int Mic";
 
 		nvidia,audio-codec = <&wm8903>;
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,headset;
 	};
 };
-
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp-750000000-1300;
-	/delete-node/ opp-800000000-1300;
-	/delete-node/ opp-900000000-1350;
-};
-
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp-750000000;
-	/delete-node/ opp-800000000;
-	/delete-node/ opp-900000000;
-};
diff --git a/arch/arm/boot/dts/tegra30-asus-tf300tg.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tg.dts
index 96345f821c3d..4861db8e1e59 100644
--- a/arch/arm/boot/dts/tegra30-asus-tf300tg.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tg.dts
@@ -1072,16 +1072,33 @@
 	display-panel {
 		compatible = "innolux,g101ice-l01";
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp-750000000-1300;
-	/delete-node/ opp-800000000-1300;
-	/delete-node/ opp-900000000-1350;
-};
+	opp-table-emc {
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
 
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp-750000000;
-	/delete-node/ opp-800000000;
-	/delete-node/ opp-900000000;
+	opp-table-actmon {
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf300tg",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Pad TF300TG RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
 };
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tl.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tl.dts
new file mode 100644
index 000000000000..2ef9d8737901
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tl.dts
@@ -0,0 +1,857 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Asus Transformer Pad LTE TF300TL";
+	compatible = "asus,tf300tl", "nvidia,tegra30";
+
+	gpio@6000d000 {
+		tf300tl-init-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+					      "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_vsync_pv7 {
+				nvidia,pins = "crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+			};
+
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_cs2_n_pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi2";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Elantech EKTH1036 touchscreen */
+		touchscreen@10 {
+			compatible = "elan,ektf3624";
+			reg = <0x10>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vcc33-supply = <&vdd_3v3_sys>;
+			vccio-supply = <&vdd_3v3_sys>;
+
+			touchscreen-size-x = <2240>;
+			touchscreen-size-y = <1408>;
+			touchscreen-inverted-y;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+
+		magnetometer@e {
+			mount-matrix =  "-1",  "0",  "0",
+					 "0", "-1",  "0",
+					 "0",  "0",  "1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "-1",  "0",  "0",
+					  "0",  "1",  "0",
+					  "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Realtek ALC5631 audio codec */
+		rt5631: audio-codec@1a {
+			compatible = "realtek,rt5631";
+			reg = <0x1a>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00050000 0x00050000 0x00050000
+					0x00050000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x0a000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000020
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0600013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xf8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	pad_battery: battery-pad {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <2940000>;
+		energy-full-design-microwatt-hours = <22000000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	dock_battery: battery-dock {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <2260000>;
+		energy-full-design-microwatt-hours = <16000000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	display-panel {
+		compatible = "innolux,g101ice-l01";
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf300tl",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Pad TF300TL RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts
new file mode 100644
index 000000000000..5d9e23a43820
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts
@@ -0,0 +1,2500 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "Asus VivoTab RT TF600T";
+	compatible = "asus,tf600t", "nvidia,tegra30";
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* uSD slot */
+		mmc2 = &sdmmc3; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		display1 = &hdmi;
+
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@80000000 {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;		/* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi: hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&hdmi_5v0_sys>;
+			pll-supply = <&vdd_1v8_vio>;
+			vdd-supply = <&vdd_3v3_sys>;
+
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* SDMMC1 pinmux */
+			sdmmc1-clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cmd {
+				nvidia,pins = "sdmmc1_dat3_py4",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cd {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-wp {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC2 pinmux */
+			vi-d1-pd5 {
+				nvidia,pins = "vi_d1_pd5",
+					      "vi_d2_pl0",
+					      "vi_d3_pl1",
+					      "vi_d5_pl3",
+					      "vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi-d8-pl6 {
+				nvidia,pins = "vi_d8_pl6",
+					      "vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* SDMMC3 pinmux */
+			sdmmc3-clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-cmd {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "sdmmc3_dat4_pd1",
+					      "sdmmc3_dat5_pd0",
+					      "sdmmc3_dat6_pd3",
+					      "sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC4 pinmux */
+			sdmmc4-clk {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-cmd {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+					      "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-rst-n {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam-mclk {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2C pinmux */
+			gen1-i2c {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			gen2-i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			cam-i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			ddc-i2c {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			pwr-i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			hotplug-i2c {
+				nvidia,pins = "pu4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* HDMI pinmux */
+			hdmi-cec {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi-hpd {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-A */
+			ulpi-data0-po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data1-po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-data5-po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-data7-po0 {
+				nvidia,pins = "ulpi_data7_po0",
+					      "ulpi_data2_po3",
+					      "ulpi_data3_po4",
+					      "ulpi_data4_po5",
+					      "ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-B */
+			uartb-txd-rts {
+				nvidia,pins = "uart2_txd_pc2",
+					      "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uartb-rxd-cts {
+				nvidia,pins = "uart2_rxd_pc3",
+					      "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-C */
+			uartc-rxd-cts {
+				nvidia,pins = "uart3_cts_n_pa1",
+					      "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartc-txd-rts {
+				nvidia,pins = "uart3_rts_n_pc0",
+					      "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-D */
+			ulpi-nxt-py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-clk-py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_dir_py1",
+					      "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* I2S pinmux */
+			dap-i2s0 {
+				nvidia,pins = "dap1_fs_pn0",
+					      "dap1_din_pn1",
+					      "dap1_dout_pn2",
+					      "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s1 {
+				nvidia,pins = "dap2_fs_pa2",
+					      "dap2_sclk_pa3",
+					      "dap2_din_pa4",
+					      "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-fs {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-din {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-dout {
+				nvidia,pins = "dap3_dout_pp2",
+					      "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s3 {
+				nvidia,pins = "dap4_fs_pp4",
+					      "dap4_din_pp5",
+					      "dap4_dout_pp6",
+					      "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			i2s4 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			nct-irq {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hall {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Asus EC pinmux */
+			ec-irqs {
+				nvidia,pins = "kb_row10_ps2",
+					      "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ec-reqs {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Memory type bootstrap */
+			mem-boostraps {
+				nvidia,pins = "gmi_ad4_pg4",
+					      "gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PCI-e pinmux */
+			pex-l2-rst-n {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+					      "pex_l0_rst_n_pdd1",
+					      "pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex-l2-clkreq-n {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7",
+					      "pex_l0_prsnt_n_pdd0",
+					      "pex_l0_clkreq_n_pdd2",
+					      "pex_wake_n_pdd3",
+					      "pex_l1_prsnt_n_pdd4",
+					      "pex_l1_clkreq_n_pdd6",
+					      "pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Display A pinmux */
+			lcd-pwr0-pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+					      "lcd_pclk_pb3",
+					      "lcd_pwr1_pc1",
+					      "lcd_d0_pe0",
+					      "lcd_d1_pe1",
+					      "lcd_d2_pe2",
+					      "lcd_d3_pe3",
+					      "lcd_d4_pe4",
+					      "lcd_d5_pe5",
+					      "lcd_d6_pe6",
+					      "lcd_d7_pe7",
+					      "lcd_d8_pf0",
+					      "lcd_d9_pf1",
+					      "lcd_d10_pf2",
+					      "lcd_d11_pf3",
+					      "lcd_d12_pf4",
+					      "lcd_d13_pf5",
+					      "lcd_d14_pf6",
+					      "lcd_d15_pf7",
+					      "lcd_de_pj1",
+					      "lcd_hsync_pj3",
+					      "lcd_vsync_pj4",
+					      "lcd_d16_pm0",
+					      "lcd_d17_pm1",
+					      "lcd_d18_pm2",
+					      "lcd_d19_pm3",
+					      "lcd_d20_pm4",
+					      "lcd_d21_pm5",
+					      "lcd_d22_pm6",
+					      "lcd_d23_pm7",
+					      "lcd_dc0_pn6",
+					      "lcd_sdin_pz2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-cs0-n-pn4 {
+				nvidia,pins = "lcd_sdout_pn5",
+					      "lcd_wr_n_pz3",
+					      "lcd_pwr2_pc6",
+					      "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			blink {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* KBC keys */
+			kb-col0 {
+				nvidia,pins = "kb_col0_pq0",
+					      "kb_row1_pr1",
+					      "kb_row3_pr3",
+					      "kb_row7_pr7",
+					      "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb-col5 {
+				nvidia,pins = "kb_col5_pq5",
+					      "kb_col7_pq7",
+					      "kb_row2_pr2",
+					      "kb_row4_pr4",
+					      "kb_row5_pr5",
+					      "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-cs0-n-pj0 {
+				nvidia,pins = "gmi_wp_n_pc7",
+					      "gmi_wait_pi7",
+					      "gmi_cs0_n_pj0",
+					      "gmi_cs1_n_pj2",
+					      "gmi_cs2_n_pk3",
+					      "gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi-pclk-pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* GPIO keys pinmux */
+			power-key {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vol-keys {
+				nvidia,pins = "kb_col3_pq3",
+					      "kb_col4_pq4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Bluetooth */
+			bt-shutdown {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			bt-dev-wake {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt-host-wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi-vsync-pd6 {
+				nvidia,pins = "vi_vsync_pd6",
+					      "vi_hsync_pd7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+			vi-d10-pt2 {
+				nvidia,pins = "vi_d10_pt2",
+					      "vi_d0_pt4",
+					      "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad0-pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+					      "gmi_ad1_pg1",
+					      "gmi_ad2_pg2",
+					      "gmi_ad3_pg3",
+					      "gmi_ad6_pg6",
+					      "gmi_ad7_pg7",
+					      "gmi_wr_n_pi0",
+					      "gmi_oe_n_pi1",
+					      "gmi_dqs_pi2",
+					      "gmi_adv_n_pk0",
+					      "gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad13-ph5 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi-ad10-ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+					      "gmi_ad11_ph3",
+					      "gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad12-ph4 {
+				nvidia,pins = "gmi_ad12_ph4",
+					      "gmi_rst_n_pi4",
+					      "gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Vibrator control */
+			vibrator {
+				nvidia,pins = "gmi_ad11_ph3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PWM pinmux */
+			pwm-0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwm-2 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-cs-n {
+				nvidia,pins = "gmi_cs4_n_pk2",
+					      "gmi_cs6_n_pi3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Spdif pinmux */
+			spdif-out {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif-in {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi-d4-pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi-d6-pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+			vi-mclk-pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			jtag {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt-sync {
+				nvidia,pins = "crt_hsync_pv6",
+					      "crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1-out {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2-out {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3-out {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sys-clk-req {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2-req-pcc5 {
+				nvidia,pins = "clk2_req_pcc5",
+					      "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3-req-pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive-dap1 {
+				nvidia,pins = "drive_dap1",
+					      "drive_dap2",
+					      "drive_dbg",
+					      "drive_at5",
+					      "drive_gme",
+					      "drive_ddc",
+					      "drive_ao1",
+					      "drive_uart3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive-sdio1 {
+				nvidia,pins = "drive_sdio1",
+					      "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+			drive-sdmmc4 {
+				nvidia,pins = "drive_gma",
+					      "drive_gmb",
+					      "drive_gmc",
+					      "drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Broadcom GPS BCM47511 */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		/* Azurewave AW-NH665 BCM4330B1 */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+
+			vbat-supply = <&vdd_3v3_com>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	gen1_i2c: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* Nuvoton NPCE698LA0BX embedded controller */
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Atmel Maxtouch MXT1664 HID over I2C */
+		touchscreen@4b {
+			compatible = "hid-over-i2c";
+			reg = <0x4b>;
+
+			hid-descr-addr = <0x0000>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_LOW>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+			vddl-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* TI TPS61050/61052 Boost Converter */
+		flash-led@33 {
+			compatible = "ti,tps61052";
+			reg = <0x33>;
+
+			led {
+				color = <LED_COLOR_ID_WHITE>;
+			};
+		};
+
+		imu@69 {
+			compatible = "invensense,mpu6050";
+			reg = <0x69>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply   = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_vio>;
+
+			mount-matrix =	 "0", "-1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				magnetometer@d {
+					compatible = "asahi-kasei,ak8975";
+					reg = <0x0d>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(D, 5) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_3v3_sys>;
+					vid-supply = <&vdd_1v8_vio>;
+
+					mount-matrix =	 "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0", "-1";
+				};
+			};
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <93750>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		rt5640: audio-codec@1c {
+			compatible = "realtek,rt5640";
+			reg = <0x1c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			clock-names = "mclk";
+		};
+
+		/* Texas Instruments TPS659110 PMIC */
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_bat>;
+			vcc2-supply = <&vdd_5v0_bat>;
+			vcc3-supply = <&vdd_1v8_vio>;
+			vcc4-supply = <&vdd_5v0_sys>;
+			vcc5-supply = <&vdd_5v0_bat>;
+			vcc6-supply = <&vdd_3v3_sys>;
+			vcc7-supply = <&vdd_5v0_bat>;
+			vccio-supply = <&vdd_5v0_bat>;
+
+			pmic-sleep-hog {
+				gpio-hog;
+				gpios = <2 GPIO_ACTIVE_HIGH>;
+				output-high;
+			};
+
+			regulators {
+				vdd_lcd: vdd1 {
+					regulator-name = "vddio_ddr_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				vddio_ddr: vdd2 {
+					regulator-name = "vddio_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <1>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8_vio: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* eMMC VDD */
+				vcore_emmc: ldo1 {
+					regulator-name = "vdd_emmc_core";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* ldo2 and ldo3 are not used by TF600T */
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/* uSD slot VDDIO */
+				vddio_usd: ldo5 {
+					regulator-name = "vddio_sdmmc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				avdd_dsi_csi: ldo6 {
+					regulator-name = "avdd_dsi_csi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+			};
+		};
+
+		/* Capella CM3218 ambient light sensor */
+		light-sensor@48 {
+			compatible = "capella,cm32181";
+			reg = <0x48>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&vdd_3v3_als>;
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		vdd_core: core-regulator@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1770000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,enable-vout-discharge;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x81>;
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		flash@1 {
+			compatible = "winbond,w25q32", "jedec,spi-nor";
+			reg = <1>;
+
+			spi-max-frequency = <20000000>;
+			vcc-supply = <&vdd_3v3_sys>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 2GB 750 MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x75e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74e30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x74430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x74040a06 0x001f0000 >;
+			};
+
+			timing-375000000 {
+				clock-frequency = <375000000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc0000044
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000005 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000d0709 0x7086110a 0x001f0000 >;
+			};
+
+			timing-750000000 {
+				clock-frequency = <750000000>;
+
+				nvidia,emem-configuration = < 0x0000000b 0xc0000087
+					0x00000004 0x00000005 0x00000012 0x0000000c
+					0x0000000b 0x00000002 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00160d12 0x710c2213 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 2GB 750 MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74630303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x73c30504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x73840a06 0x001f0000 >;
+			};
+
+			timing-375000000 {
+				clock-frequency = <375000000>;
+
+				nvidia,emem-configuration = < 0x0000000b 0xc0000044
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000005 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000c0609 0x7086110a 0x001f0000 >;
+			};
+
+			timing-750000000 {
+				clock-frequency = <750000000>;
+
+				nvidia,emem-configuration = < 0x00000016 0xc0000087
+					0x00000003 0x00000004 0x00000012 0x0000000c
+					0x0000000b 0x00000002 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00150c12 0x710c2213 0x001f0000 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 2GB 750 MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x74430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x74040a06 0x001f0000 >;
+			};
+
+			timing-375000000 {
+				clock-frequency = <375000000>;
+
+				nvidia,emem-configuration = < 0x0000000b 0xc0000044
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000005 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000d0709 0x7086110a 0x001f0000 >;
+			};
+
+			timing-750000000 {
+				clock-frequency = <750000000>;
+
+				nvidia,emem-configuration = < 0x00000016 0xc0000087
+					0x00000004 0x00000005 0x00000012 0x0000000c
+					0x0000000b 0x00000003 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00160d12 0x710c2213 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 2GB 750 MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000007 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000008 0x00000008
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x0000000f 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000010 0x00000010
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001e 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000020 0x00000020
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x0000003d 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000040 0x00000040
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-375000000 {
+				clock-frequency = <375000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000011
+					0x0000006f 0x0000000c 0x00000004 0x00000003
+					0x00000008 0x00000002 0x0000000a 0x00000004
+					0x00000004 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000b2d 0x00000000 0x000002cb
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000075 0x00000200
+					0x00000004 0x0000000c 0x00000000 0x00000004
+					0x00000005 0x00000b6d 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x00200084
+					0x00008000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0600013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x06000021 0x00000802 0x00020000
+					0x00000100 0x0150000c 0xa0f10000 0x00000000
+					0x00000000 0x8000174b 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-750000000 {
+				clock-frequency = <750000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000023
+					0x000000df 0x00000019 0x00000009 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000009
+					0x00000009 0x00000003 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x0000169a 0x00000000 0x000005a6
+					0x00000003 0x00000010 0x00000001 0x00000000
+					0x0000000e 0x00000018 0x000000e9 0x00000200
+					0x00000005 0x00000017 0x00000000 0x00000007
+					0x00000008 0x000016da 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf0080191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0600013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x06000021 0x00000802 0x00020000
+					0x00000100 0x00df000c 0xa0f10000 0x00000000
+					0x00000000 0x80002d93 0xf8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 2GB 750 MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x0000000d 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000000e 0x0000000e
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001a 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000001c 0x0000001c
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000035 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000038 0x00000038
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-375000000 {
+				clock-frequency = <375000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000011
+					0x00000060 0x0000000c 0x00000003 0x00000004
+					0x00000008 0x00000002 0x0000000a 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000b2d 0x00000000 0x000002cb
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x00000010 0x00000066 0x00000200
+					0x00000004 0x0000000c 0x00000000 0x00000004
+					0x00000005 0x00000b6d 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007288 0x00200084
+					0x00008000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0600013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x08000168 0x06000021 0x00000802 0x00020000
+					0x00000100 0x015f000c 0xa0f10000 0x00000000
+					0x00000000 0x8000174b 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-750000000 {
+				clock-frequency = <750000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000023
+					0x000000c1 0x00000019 0x00000008 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000008
+					0x00000008 0x00000003 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x0000169a 0x00000000 0x000005a6
+					0x00000003 0x00000010 0x00000001 0x00000000
+					0x0000000e 0x00000018 0x000000cb 0x00000200
+					0x00000005 0x00000017 0x00000000 0x00000007
+					0x00000008 0x000016da 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf0080191
+					0x00008000 0x00008008 0x00000008 0x00000008
+					0x00000008 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x00fd000c 0xa0f10000 0x00000000
+					0x00000000 0x80002d93 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 2GB 750 MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001e 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000020 0x00000020
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x0000003d 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000040 0x00000040
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-375000000 {
+				clock-frequency = <375000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000011
+					0x0000006f 0x0000000c 0x00000004 0x00000003
+					0x00000008 0x00000002 0x0000000a 0x00000004
+					0x00000004 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000b2d 0x00000000 0x000002cb
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000075 0x00000200
+					0x00000004 0x0000000c 0x00000000 0x00000004
+					0x00000005 0x00000b6d 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x00200084
+					0x00008000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0150000c 0xa0f10000 0x00000000
+					0x00000000 0x8000174b 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-750000000 {
+				clock-frequency = <750000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000023
+					0x000000df 0x00000019 0x00000009 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000009
+					0x00000009 0x00000006 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x0000169a 0x00000000 0x000005a6
+					0x00000003 0x00000010 0x00000001 0x00000000
+					0x0000000e 0x00000018 0x000000e9 0x00000200
+					0x00000005 0x00000017 0x00000000 0x00000007
+					0x00000008 0x000016da 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf0080191
+					0x00008000 0x0000800a 0x0000000a 0x0000000a
+					0x0000000a 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x007fc00a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x00df000c 0xa0f10000 0x00000000
+					0x00000000 0x80002d93 0xf8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {		/* i2s1 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 {		/* i2s3 */
+			status = "okay";
+		};
+	};
+
+	sdmmc1: mmc@78000000 {
+		status = "okay";
+		bus-width = <4>;
+
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		power-gpios =  <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
+
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vddio_usd>;
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_com>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* Azurewave AW-NH665 BCM4330B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+
+		non-removable;
+		mmc-ddr-1_8v;
+
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	/* USB via ASUS connector */
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Dock's USB port */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_5v0_bat>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_5v0_bl>;
+		pwms = <&pwm 0 71428>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <15>;
+	};
+
+	pad_battery: battery-pad {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <6760000>;
+		energy-full-design-microwatt-hours = <25000000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	dock_battery: battery-dock {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <2980000>;
+		energy-full-design-microwatt-hours = <22000000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-dock-hall-sensor {
+			label = "Lid sensor";
+			gpios = <&gpio TEGRA_GPIO(BB, 6) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		switch-lineout-detect {
+			label = "Audio dock line-out detect";
+			gpios = <&gpio TEGRA_GPIO(X, 3) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LINEOUT_INSERT>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(P, 1) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	vdd_5v0_bat: regulator-bat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ac_bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_cp: regulator-sby {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sby";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_5v0_sys: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_1v5_ddr: regulator-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_3v3_sys: regulator-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_3v3_com: regulator-com {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_als: regulator-als {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_als";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio TEGRA_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_5v0_bl: regulator-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_bl";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	hdmi_5v0_sys: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5640-tf600t",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "Asus VivoTab RT TF600T RT5640";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Speakers", "SPORP",
+			"Speakers", "SPORN",
+			"Speakers", "SPOLP",
+			"Speakers", "SPOLN",
+			"DMIC1", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5640>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>;
+		nvidia,coupled-mic-hp-det;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * Transformers from getting too hot from a user's
+		 * tactile perspective. The CPU zone is intended to
+		 * protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 65C */
+					temperature = <65000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 75C until temperature drops to 74.8C */
+					temperature = <75000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-tf700t.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf700t.dts
index 1a331dec3cfe..9c480fde2e76 100644
--- a/arch/arm/boot/dts/tegra30-asus-tf700t.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf700t.dts
@@ -15,7 +15,7 @@
 			rgb {
 				status = "okay";
 
-				port@0 {
+				port {
 					dpi_output: endpoint {
 						remote-endpoint = <&bridge_input>;
 						bus-width = <24>;
@@ -758,6 +758,24 @@
 				vddio-supply = <&vdd_1v8_vio>;
 				vddmipi-supply = <&vdd_1v2_mipi>;
 
+				/*
+				 * Panasonic VVX10F004B00 or HYDIS HV101WU1-1E1
+				 * LCD SuperIPS+ Full HD panel.
+				 */
+				panel@1 {
+					compatible = "panasonic,vvx10f004b00";
+					reg = <1>;
+
+					power-supply = <&vdd_pnl>;
+					backlight = <&backlight>;
+
+					port {
+						panel_input: endpoint {
+							remote-endpoint = <&bridge_output>;
+						};
+					};
+				};
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -779,28 +797,18 @@
 						};
 					};
 				};
-
-				/*
-				 * Panasonic VVX10F004B00 or HYDIS HV101WU1-1E1
-				 * LCD SuperIPS+ Full HD panel.
-				 */
-				panel@1 {
-					compatible = "panasonic,vvx10f004b00";
-					reg = <1>;
-
-					power-supply = <&vdd_pnl>;
-					backlight = <&backlight>;
-
-					port {
-						panel_input: endpoint {
-							remote-endpoint = <&bridge_output>;
-						};
-					};
-				};
 			};
 		};
 	};
 
+	opp-table-actmon {
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-900000000-1350;
+	};
+
 	vdd_1v2_mipi: regulator-mipi {
 		compatible = "regulator-fixed";
 		regulator-name = "tc358768_1v2_vdd";
@@ -812,12 +820,21 @@
 		enable-active-high;
 		vin-supply = <&vdd_3v3_sys>;
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp-900000000-1350;
-};
-
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp-900000000;
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf700t",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Infinity TF700T RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-transformer-common.dtsi
index c27e70d8bf2b..ead95306840f 100644
--- a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-transformer-common.dtsi
@@ -33,6 +33,14 @@
 	 */
 	chosen {};
 
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
 	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
@@ -168,7 +176,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			/* SDMMC3 pinmux */
@@ -550,7 +558,7 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 
-			spi2_cs1_n_pw2 {
+			hp_detect {
 				nvidia,pins = "spi2_cs1_n_pw2";
 				nvidia,function = "spi2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
@@ -558,10 +566,10 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 
-			spi2_sck_px2 {
+			mic_detect {
 				nvidia,pins = "spi2_sck_px2";
 				nvidia,function = "spi2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
@@ -711,7 +719,7 @@
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			/* GPIO keys pinmux */
@@ -805,7 +813,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			vi_d10_pt2 {
@@ -937,7 +945,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			vi_mclk_pt1 {
@@ -1080,6 +1088,7 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 		status = "okay";
 
@@ -1088,6 +1097,7 @@
 
 	serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 		status = "okay";
 
@@ -1187,17 +1197,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		nct72: temperature-sensor@4c {
-			compatible = "onnn,nct1008";
-			reg = <0x4c>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
-
-			vcc-supply = <&vdd_3v3_sys>;
-			#thermal-sensor-cells = <1>;
-		};
-
 		/* Texas Instruments TPS659110 PMIC */
 		pmic: pmic@2d {
 			compatible = "ti,tps65911";
@@ -1323,6 +1322,17 @@
 			};
 		};
 
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		vdd_core: core-regulator@60 {
 			compatible = "ti,tps62361";
 			reg = <0x60>;
@@ -1509,7 +1519,6 @@
 
 	extcon-keys {
 		compatible = "gpio-keys";
-		interrupt-parent = <&gpio>;
 
 		switch-dock-hall-sensor {
 			label = "Lid sensor";
@@ -1532,17 +1541,8 @@
 		};
 	};
 
-	firmware {
-		trusted-foundations {
-			compatible = "tlm,trusted-foundations";
-			tlm,version-major = <2>;
-			tlm,version-minor = <8>;
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
-		interrupt-parent = <&gpio>;
 
 		key-power {
 			label = "Power";
@@ -1553,19 +1553,19 @@
 			wakeup-source;
 		};
 
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
 			debounce-interval = <10>;
 			wakeup-event-action = <EV_ACT_ASSERTED>;
 			wakeup-source;
 		};
 
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
 			debounce-interval = <10>;
 			wakeup-event-action = <EV_ACT_ASSERTED>;
 			wakeup-source;
@@ -1676,7 +1676,8 @@
 		nvidia,i2s-controller = <&tegra_i2s1>;
 
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
-		nvidia,hp-mute-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>;
+		nvidia,coupled-mic-hp-det;
 
 		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/nvidia/tegra30-beaver.dts
index 5ad62b567d32..1d74179dde79 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-beaver.dts
@@ -1733,6 +1733,8 @@
 	};
 
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -1974,6 +1976,28 @@
 		#clock-cells = <0>;
 	};
 
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@1 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@2 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@3 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 
@@ -2113,26 +2137,4 @@
 		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
 					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
-
-	cpus {
-		cpu0: cpu@0 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@1 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@2 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@3 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/nvidia/tegra30-cardhu-a02.dts
index 247185314f46..247185314f46 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-cardhu-a02.dts
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/nvidia/tegra30-cardhu-a04.dts
index 2911f08863a0..2911f08863a0 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-cardhu-a04.dts
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/nvidia/tegra30-cardhu.dtsi
index 540530c983ff..0120859d6d72 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-cardhu.dtsi
@@ -170,11 +170,14 @@
 	};
 
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 		status = "okay";
 	};
@@ -468,6 +471,33 @@
 		};
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			interrupt-parent = <&pmic>;
+			interrupts = <2 0>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+	};
+
 	panel: panel {
 		compatible = "chunghwa,claa101wb01";
 		ddc-i2c-bus = <&panelddc>;
@@ -681,31 +711,4 @@
 			};
 		};
 	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-power {
-			label = "Power";
-			interrupt-parent = <&pmic>;
-			interrupts = <2 0>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <100>;
-			wakeup-source;
-		};
-
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <10>;
-		};
-
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <10>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/nvidia/tegra30-colibri-eval-v3.dts
index 8dbc15f9a9e4..1990bf8e122d 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-colibri-eval-v3.dts
@@ -38,6 +38,8 @@
 
 	/* Colibri UART-A */
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -136,7 +138,7 @@
 		pwms = <&pwm 0 5000000>; /* PWM<A> */
 	};
 
-	clk16m: osc3 {
+	clk16m: clock-osc3 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <16000000>;
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
index 310dff05910d..81c8a5fd92cc 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
@@ -20,6 +20,15 @@
 		};
 	};
 
+	gpio: gpio@6000d000 {
+		lan-reset-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "LAN_RESET#";
+		};
+	};
+
 	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -701,11 +710,13 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 	};
 
@@ -849,8 +860,7 @@
 		touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
-			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
-			interrupt-controller;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
@@ -864,6 +874,11 @@
 			st,sample-time = <4>;
 			/* forbid to use ADC channels 3-0 (touch) */
 
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				st,norequest-mask = <0x0F>;
+			};
+
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
 				/* 8 sample average control */
@@ -880,11 +895,6 @@
 				/* 5 ms touch detect interrupt delay */
 				st,touch-det-delay = <5>;
 			};
-
-			stmpe_adc {
-				compatible = "st,stmpe-adc";
-				st,norequest-mask = <0x0F>;
-			};
 		};
 
 		/*
@@ -972,7 +982,7 @@
 		vbus-supply = <&reg_lan_v_bus>;
 	};
 
-	clk32k_in: xtal1 {
+	clk32k_in: clock-xtal1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
@@ -1053,12 +1063,3 @@
 					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
 };
-
-&gpio {
-	lan-reset-n-hog {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LAN_RESET#";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/nvidia/tegra30-cpu-opp-microvolt.dtsi
index b8e0e9117021..b8e0e9117021 100644
--- a/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-cpu-opp-microvolt.dtsi
diff --git a/arch/arm/boot/dts/tegra30-cpu-opp.dtsi b/arch/arm/boot/dts/nvidia/tegra30-cpu-opp.dtsi
index 5b9ebb75a09f..5b9ebb75a09f 100644
--- a/arch/arm/boot/dts/tegra30-cpu-opp.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-cpu-opp.dtsi
diff --git a/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts b/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts
new file mode 100644
index 000000000000..c6ef0a20c19f
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-lg-x3.dtsi"
+
+/ {
+	model = "LG Optimus 4X HD P880";
+	compatible = "lg,p880", "nvidia,tegra30";
+
+	aliases {
+		mmc1 = &sdmmc3; /* uSD slot */
+		mmc2 = &sdmmc1; /* WiFi */
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* WLAN SDIO pinmux */
+			host-wlan-wake {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GNSS UART-B pinmux */
+			uartb-rxd {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartb-txd {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gps-reset {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* MicroSD pinmux */
+			sdmmc3-clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-data {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			microsd-detect {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO keys pinmux */
+			volume-up {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			current-alert-irq {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* AUDIO pinmux */
+			sub-mic-ldo {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	i2c@7000c400 {
+		touchscreen@20 {
+			rmi4-f11@11 {
+				syna,clip-x-high = <1440>;
+				syna,clip-y-high = <2560>;
+
+				touchscreen-inverted-y;
+			};
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* SAMSUNG 1GB K4P8G304EB FGC1 533MHz */
+			nvidia,ram-code = <0>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = < 0x00050001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x77230303 0x001f0000 >;
+			};
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-266500000 {
+				clock-frequency = <266500000>;
+
+				nvidia,emem-configuration = < 0x00000004 0xC0000030
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000006 0x00000001 0x00000002 0x00000005
+					0x00000001 0x00000000 0x00000003 0x00000003
+					0x03030001 0x00090608 0x70040c09 0x001f0000 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emem-configuration = < 0x00000008 0xC0000060
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000d 0x00000002 0x00000002 0x00000008
+					0x00000002 0x00000000 0x00000004 0x00000005
+					0x05040002 0x00110b10 0x70281811 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* SAMSUNG 1GB K4P8G304EB FGC1 533MHz */
+			nvidia,ram-code = <0>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000000
+					0x00000001 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x0000002f 0x00000000 0x0000000b
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000002 0x00000002
+					0x00000003 0x00000008 0x00000004 0x00000001
+					0x00000002 0x00000036 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000009 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000164 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000001
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000001
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000001
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000001
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-266500000 {
+				clock-frequency = <266500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020002>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000018>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000022 0x0000000b 0x00000004 0x00000005
+					0x00000005 0x00000001 0x00000007 0x00000004
+					0x00000004 0x00000002 0x00000002 0x00000000
+					0x00000002 0x00000005 0x00000002 0x0000000c
+					0x0000000b 0x000003ef 0x00000000 0x000000fb
+					0x00000001 0x00000001 0x00000004 0x00000000
+					0x00000001 0x00000009 0x00000026 0x00000026
+					0x00000004 0x0000000e 0x00000006 0x00000001
+					0x00000002 0x00000455 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0x003200a4
+					0x00008000 0x00050000 0x00050000 0x00050000
+					0x00050000 0x00050000 0x00050000 0x00050000
+					0x00050000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00060000 0x00060000 0x00060000
+					0x00060000 0x000b0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000060 0x000a000a 0xa0f10000 0x00000000
+					0x00000000 0x800008ee 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020006>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000030>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000045 0x00000016 0x00000009 0x00000008
+					0x00000009 0x00000003 0x0000000d 0x00000009
+					0x00000009 0x00000005 0x00000003 0x00000000
+					0x00000004 0x00000009 0x00000006 0x0000000d
+					0x00000010 0x000007df 0x00000000 0x000001f7
+					0x00000003 0x00000003 0x00000009 0x00000000
+					0x00000001 0x0000000f 0x0000004b 0x0000004b
+					0x00000008 0x0000001b 0x0000000c 0x00000001
+					0x00000002 0x000008aa 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0xf0120091
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00090220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000c0 0x000e000e 0xa0f10000 0x00000000
+					0x00000000 0x800010d9 0xe0000000 0xff00ff88 >;
+			};
+		};
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		cd-gpios = <&gpio TEGRA_GPIO(W, 5) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+
+		vmmc-supply = <&vdd_usd>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	battery: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion";
+		charge-full-design-microamp-hours = <2150000>;
+		energy-full-design-microwatt-hours = <8200000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	gpio-keys {
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(O, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "lg,tegra-audio-max98089-p880",
+			     "nvidia,tegra-audio-max98089";
+		nvidia,model = "LG Optimus 4X HD MAX98089";
+
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-lg-p895.dts b/arch/arm/boot/dts/nvidia/tegra30-lg-p895.dts
new file mode 100644
index 000000000000..e32fafc7f5e0
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-lg-p895.dts
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-lg-x3.dtsi"
+
+/ {
+	model = "LG Optimus Vu P895";
+	compatible = "lg,p895", "nvidia,tegra30";
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* GNSS UART-B pinmux */
+			uartb-cts-rxd {
+				nvidia,pins = "uart2_cts_n_pj5",
+						"uart2_rxd_pc3";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartb-rts-txd {
+				nvidia,pins = "uart2_rts_n_pj6",
+						"uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gps-reset {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GPIO keys pinmux */
+			memo-key {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			volume-up {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			current-alert-irq {
+				nvidia,pins = "spi1_cs0_n_px6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Panel pinmux */
+			panel-vdd {
+				nvidia,pins = "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* AUDIO pinmux */
+			sub-mic-ldo {
+				nvidia,pins = "gmi_dqs_pi2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Modem pinmux */
+			usim-detect {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive-sdmmc4 {
+				nvidia,pins = "drive_gma",
+						"drive_gmb",
+						"drive_gmc",
+						"drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+	};
+
+	i2c@7000c400 {
+		touchscreen@20 {
+			rmi4-f11@11 {
+				syna,clip-x-high = <1535>;
+				syna,clip-y-high = <2047>;
+			};
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-2 {
+			/* Hynix 1GB H9TCNNN8JDMMPR LPDDR2 533MHz */
+			nvidia,ram-code = <2>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x77230303 0x001f0000 >;
+			};
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00030003 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-266500000 {
+				clock-frequency = <266500000>;
+
+				nvidia,emem-configuration = < 0x00000008 0xc0000030
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000006 0x00000001 0x00000002 0x00000005
+					0x00000001 0x00000000 0x00000003 0x00000003
+					0x03030001 0x00090608 0x70040c09 0x001f0000 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emem-configuration = < 0x0000000f 0xc0000060
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000d 0x00000002 0x00000002 0x00000008
+					0x00000002 0x00000000 0x00000004 0x00000005
+					0x05040002 0x00110b10 0x70281811 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-2 {
+			/* Hynix 1GB H9TCNNN8JDMMPR LPDDR2 533MHz */
+			nvidia,ram-code = <2>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000000
+					0x00000001 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x0000002f 0x00000000 0x0000000b
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000002 0x00000002
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x00000036 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000009 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000164 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xd0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xd0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xd0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000004 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000005 0x00000004
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-266500000 {
+				clock-frequency = <266500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020002>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000018>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000022 0x0000000b 0x00000004 0x00000005
+					0x00000005 0x00000001 0x00000007 0x00000004
+					0x00000004 0x00000002 0x00000002 0x00000000
+					0x00000002 0x00000005 0x00000002 0x0000000c
+					0x0000000b 0x000003ef 0x00000000 0x000000fb
+					0x00000001 0x00000001 0x00000004 0x00000000
+					0x00000001 0x00000009 0x00000026 0x00000026
+					0x00000004 0x0000000e 0x00000006 0x00000004
+					0x00000002 0x00000455 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0x003200a4
+					0x00008000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080002 0x00080002 0x00080002
+					0x00080002 0x000e0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000060 0x000a000a 0xa0f10000 0x00000000
+					0x00000000 0x800008ee 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020006>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000030>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000045 0x00000016 0x00000009 0x00000008
+					0x00000009 0x00000003 0x0000000d 0x00000009
+					0x00000009 0x00000005 0x00000003 0x00000000
+					0x00000004 0x0000000a 0x00000006 0x0000000d
+					0x00000010 0x000007df 0x00000000 0x000001f7
+					0x00000003 0x00000003 0x00000009 0x00000000
+					0x00000001 0x0000000f 0x0000004b 0x0000004b
+					0x00000008 0x0000001b 0x0000000c 0x00000004
+					0x00000002 0x000008aa 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0xf0120091
+					0x00008000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000c0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000c0 0x000e000e 0xa0f10000 0x00000000
+					0x00000000 0x800010d9 0xe0000000 0xff00ff88 >;
+			};
+		};
+	};
+
+	battery: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion";
+		charge-full-design-microamp-hours = <2080000>;
+		energy-full-design-microwatt-hours = <7700000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	gpio-keys {
+		key-memo {
+			label = "Memo";
+			gpios = <&gpio TEGRA_GPIO(B, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MEMO>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		led-power {
+			label = "power::white";
+			gpios = <&gpio TEGRA_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+
+			linux,default-trigger = "battery-charging";
+
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_CHARGING;
+		};
+	};
+
+	regulator-lcd3v {
+		gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "lg,tegra-audio-max98089-p895",
+			     "nvidia,tegra-audio-max98089";
+		nvidia,model = "LG Optimus Vu MAX98089";
+
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-lg-x3.dtsi b/arch/arm/boot/dts/nvidia/tegra30-lg-x3.dtsi
new file mode 100644
index 000000000000..909260a5d0fb
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-lg-x3.dtsi
@@ -0,0 +1,1812 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mfd/max77620.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd; /* Console */
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen { };
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;		/* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		ramoops@bed00000 {
+			compatible = "ramoops";
+			reg = <0xbed00000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/* 1kB */
+			ecc-size = <16>;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;	/* 2MB */
+			no-map;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* WLAN SDIO pinmux */
+			sdmmc1-clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cmd {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+						"sdmmc1_dat3_py4",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			wlan-reset {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			wlan-host-wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GNSS UART-B pinmux */
+			gps-pwr-en {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gps-ldo-en {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gps-clk-ref {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Bluetooth UART-C pinmux */
+			uartc-cts-rxd {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartc-rts-txd {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt-reset {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt-dev-wake {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt-host-wake {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			bt-pcm-dap4 {
+				nvidia,pins = "dap4_fs_pp4",
+						"dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* EMMC pinmux */
+			sdmmc4-clk {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-data {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-reset {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2C pinmux */
+			gen1-i2c {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			gen2-i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			cam-i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			ddc-i2c {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			pwr-i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			mhl-i2c {
+				nvidia,pins = "kb_col6_pq6",
+						"kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO keys pinmux */
+			power-key {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			volume-down {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			sen-vdd {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			proxi-vdd {
+				nvidia,pins = "spi2_miso_px1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sen-vio {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			nct-irq {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			bat-irq {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			charger-irq {
+				nvidia,pins = "gmi_cs1_n_pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			mpu-irq {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			compass-irq {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			light-irq {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* LED pinmux */
+			backlight-en {
+				nvidia,pins = "lcd_dc0_pn6";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			flash-led-en {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			keypad-led {
+				nvidia,pins = "kb_row2_pr2",
+						"kb_row3_pr3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* NFC pinmux */
+			nfc-irq {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			nfc-ven {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			nfc-firm {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* DC pinmux */
+			lcd-pwr {
+				nvidia,pins = "lcd_pwr0_pb2",
+						"lcd_pwr1_pc1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd-wr-n {
+				nvidia,pins = "lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-id {
+				nvidia,pins = "lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd-pclk {
+				nvidia,pins = "lcd_pclk_pb3",
+						"lcd_de_pj1",
+						"lcd_hsync_pj3",
+						"lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-rgb-blue {
+				nvidia,pins = "lcd_d0_pe0",
+						"lcd_d1_pe1",
+						"lcd_d2_pe2",
+						"lcd_d3_pe3",
+						"lcd_d4_pe4",
+						"lcd_d5_pe5",
+						"lcd_d18_pm2",
+						"lcd_d19_pm3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-rgb-green {
+				nvidia,pins = "lcd_d6_pe6",
+						"lcd_d7_pe7",
+						"lcd_d8_pf0",
+						"lcd_d9_pf1",
+						"lcd_d10_pf2",
+						"lcd_d11_pf3",
+						"lcd_d20_pm4",
+						"lcd_d21_pm5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-rgb-red {
+				nvidia,pins = "lcd_d12_pf4",
+						"lcd_d13_pf5",
+						"lcd_d14_pf6",
+						"lcd_d15_pf7",
+						"lcd_d16_pm0",
+						"lcd_d17_pm1",
+						"lcd_d22_pm6",
+						"lcd_d23_pm7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Bridge pinmux */
+			bridge-reset {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			rgb-ic-en {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bridge-clk {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			rgb-bridge {
+				nvidia,pins = "lcd_sdin_pz2",
+						"lcd_sdout_pn5",
+						"lcd_cs0_n_pn4",
+						"lcd_sck_pz4";
+				nvidia,function = "spi5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Panel pinmux */
+			panel-reset {
+				nvidia,pins = "lcd_cs1_n_pw0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			panel-vio {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Touchscreen pinmux */
+			touch-vdd {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch-vio {
+				nvidia,pins = "spi1_mosi_px4";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch-irq-n {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			touch-rst-n {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch-maker-id {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MHL pinmux */
+			mhl-vio {
+				nvidia,pins = "pv2";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			mhl-rst-n {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			mhl-irq {
+				nvidia,pins = "crt_vsync_pv7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			mhl-sel {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi-hpd {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* AUDIO pinmux */
+			hp-detect {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hp-hook {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ear-mic-en {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			audio-irq {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			audio-mclk {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_din_pn1",
+						"dap1_dout_pn2",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s1 {
+				nvidia,pins = "dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MUIC pinmux */
+			muic-irq {
+				nvidia,pins = "gmi_cs0_n_pj0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			muic-dp2t {
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			muic-usif {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ifx-usb-vbus-en {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcb-rev {
+				nvidia,pins = "gmi_wait_pi7",
+						"gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag-rtck {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Camera pinmux */
+			cam-mclk {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam-pmic-en {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			front-cam-rst {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			front-cam-vio {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			rear-cam-rst {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			rear-cam-eprom-pr {
+				nvidia,pins = "gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			rear-cam-vcm-pwdn {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Haptic pinmux */
+			haptic-en {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			haptic-osc {
+				nvidia,pins = "gmi_ad11_ph3";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Modem pinmux */
+			cp2ap-ack1-host-active {
+				nvidia,pins = "pu5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cp2ap-ack2-host-wakeup {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ap2cp-ack2-suspend-req {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ap2cp-ack1-slave-wakeup {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cp-kkp {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cp-crash-irq {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ap2cp-uarta-tx-ipc {
+				nvidia,pins = "pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ap2cp-uarta-rx-ipc {
+				nvidia,pins = "pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			fota-ap-cts-cp-rts {
+				nvidia,pins = "pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			fota-ap-rts-cp-cts {
+				nvidia,pins = "pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			modem-enable {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "hsi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			modem-reset {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap-i2s2 {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1",
+						"dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive-i2c {
+				nvidia,pins = "drive_dbg",
+						"drive_at5",
+						"drive_gme",
+						"drive_ddc",
+						"drive_ao1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive-uart3 {
+				nvidia,pins = "drive_uart3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive-gmi {
+				nvidia,pins = "drive_at3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* GNSS GSD5T */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		/* BCM4330B1 37.4 MHz Class 1.5 ExtLNA */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 4) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+
+			vbat-supply = <&vdd_3v3_vbat>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	uartd: serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+
+		/* Console */
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	gen1_i2c: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Aichi AMI306 digital compass */
+		magnetometer@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0x0e>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 5) IRQ_TYPE_EDGE_RISING>;
+
+			avdd-supply = <&vdd_3v0_sen>;
+			dvdd-supply = <&vdd_1v8_vio>;
+
+			mount-matrix = "-1",  "0",  "0",
+					"0",  "1",  "0",
+					"0",  "0", "-1";
+		};
+
+		max98089: audio-codec@10 {
+			compatible = "maxim,max98089";
+			reg = <0x10>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			clock-names = "mclk";
+
+			assigned-clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			assigned-clock-parents = <&tegra_car TEGRA30_CLK_EXTERN1>;
+		};
+
+		nfc@28 {
+			compatible = "nxp,pn544-i2c";
+			reg = <0x28>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_RISING>;
+
+			enable-gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+			firmware-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		};
+
+		imu@68 {
+			compatible = "invensense,mpu6050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&vdd_3v0_sen>;
+			vddio-supply = <&vdd_1v8_sen>;
+
+			mount-matrix =  "1",  "0",  "0",
+					"0",  "1",  "0",
+					"0",  "0", "-1";
+		};
+	};
+
+	gen2_i2c: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Synaptics RMI4 S3203B touchcreen */
+		touchscreen@20 {
+			compatible = "syna,rmi4-i2c";
+			reg = <0x20>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Q, 3) IRQ_TYPE_EDGE_FALLING>;
+
+			vdd-supply = <&vdd_3v0_touch>;
+			vio-supply = <&vdd_1v8_touch>;
+
+			syna,reset-delay-ms = <20>;
+			syna,startup-delay-ms = <200>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rmi4-f01@1 {
+				reg = <0x1>;
+				syna,nosleep-mode = <1>;
+			};
+
+			rmi4-f11@11 {
+				reg = <0x11>;
+				syna,sensor-type = <1>;
+
+				syna,clip-x-low = <0>;
+				syna,clip-y-low = <0>;
+			};
+		};
+	};
+
+	cam_i2c: i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		dw9714: coil@c {
+			compatible = "dongwoon,dw9714";
+			reg = <0x0c>;
+
+			enable-gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_HIGH>;
+
+			vcc-supply = <&vcc_focuser>;
+		};
+
+		camera-pmic@7d {
+			compatible = "ti,lp8720";
+			reg = <0x7d>;
+
+			enable-gpios = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
+
+			vt_1v2_front: ldo1 {
+				regulator-name = "vt_1v2_dig";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vt_2v7_front: ldo2 {
+				regulator-name = "vt_2v7_vana";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+			};
+
+			vdd_2v7_rear: ldo3 {
+				regulator-name = "8m_2v7_vana";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vio_1v8_rear: ldo4 {
+				regulator-name = "vio_1v8_cam";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcc_focuser: ldo5 {
+				regulator-name = "8m_2v8_vcm";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vdd_1v2_rear: buck {
+				regulator-name = "8m_1v2_cam";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	pwr_i2c: i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: max77663@1c {
+			compatible = "maxim,max77663";
+			reg = <0x1c>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			system-power-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77663_default>;
+
+			max77663_default: pinmux {
+				gpio1 {
+					pins = "gpio1";
+					function = "gpio";
+					drive-open-drain = <1>;
+				};
+
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+			};
+
+			fps {
+				fps0 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+
+				fps1 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+				};
+
+				fps2 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			regulators {
+				in-sd0-supply = <&vdd_5v0_vbus>;
+				in-sd1-supply = <&vdd_5v0_vbus>;
+				in-sd2-supply = <&vdd_5v0_vbus>;
+				in-sd3-supply = <&vdd_5v0_vbus>;
+
+				in-ldo0-1-supply = <&vdd_1v8_vio>;
+				in-ldo2-supply   = <&vdd_3v3_vbat>;
+				in-ldo3-5-supply = <&vdd_3v3_vbat>;
+				in-ldo4-6-supply = <&vdd_3v3_vbat>;
+				in-ldo7-8-supply = <&vdd_1v8_vio>;
+
+				vdd_cpu: sd0 {
+					regulator-name = "vdd_cpu";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_core: sd1 {
+					regulator-name = "vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-coupled-with = <&vdd_cpu>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				vdd_1v8_vio: sd2 {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				sd3 {
+					regulator-name = "vddio_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				ldo0 {
+					regulator-name = "avdd_pll";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				ldo1 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				avdd_3v3_periph: ldo2 {
+					regulator-name = "avdd_usb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_usd: ldo3 {
+					regulator-name = "vdd_sdmmc3";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				vcore_emmc: ldo5 {
+					regulator-name = "vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				avdd_1v8_hdmi_pll: ldo6 {
+					regulator-name = "avdd_osc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_1v2_mhl: ldo7 {
+					regulator-name = "vdd_1v2_mhl";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1250000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				ldo8 {
+					regulator-name = "avdd_dsi_csi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+			};
+		};
+
+		fuel-gauge@36 {
+			compatible = "maxim,max17043";
+			reg = <0x36>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_FALLING>;
+
+			monitored-battery = <&battery>;
+
+			maxim,alert-low-soc-level = <10>;
+			wakeup-source;
+		};
+
+		power-sensor@40 {
+			compatible = "ti,ina230";
+			reg = <0x40>;
+
+			vs-supply = <&vdd_3v0_sen>;
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 5) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v0_sen>;
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	i2c-mhl {
+		compatible = "i2c-gpio";
+
+		sda-gpios = <&gpio TEGRA_GPIO(Q, 7) (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio TEGRA_GPIO(Q, 6) (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		i2c-gpio,delay-us = <5>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	spi@7000dc00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		/* DSI bridge */
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x1c>;
+			nvidia,reg-addr = <0x41>;
+			nvidia,reg-data = <0x02>;
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		/* HIFI CODEC */
+		i2s@70080300 {		/* i2s0 */
+			status = "okay";
+		};
+
+		/* BASEBAND */
+		i2s@70080500 {		/* i2s2 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 {		/* i2s3 */
+			status = "okay";
+		};
+	};
+
+	sdmmc1: mmc@78000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_vbat>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* BCM4330B1 37.4 MHz Class 1.5 ExtLNA */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+
+		non-removable;
+		mmc-ddr-1_8v;
+
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	/* Micro USB */
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&avdd_3v3_periph>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	gps_refclk: clock-gps {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		clock-accuracy = <100>;
+		#clock-cells = <0>;
+	};
+
+	gps_osc: clock-gps-osc-gate {
+		compatible = "gpio-gate-clock";
+		enable-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+		clocks = <&gps_refclk>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(O, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-keypad {
+			label = "keypad::white";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+		};
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-625000000;
+		/delete-node/ opp-667000000;
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-625000000-1200;
+		/delete-node/ opp-625000000-1250;
+		/delete-node/ opp-667000000-1200;
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	vdd_5v0_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_vbat: regulator-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbat";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v0_vbus>;
+	};
+
+	vdd_3v0_sen: regulator-sen3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v0_sensor";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vdd_3v0_proxi: regulator-proxi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v0_proxi";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vdd_1v8_sen: regulator-sen1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_sensor";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vcc_3v0_lcd: regulator-lcd3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v0_lcd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-boot-on;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	iovcc_1v8_lcd: regulator-lcd1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "iovcc_1v8_lcd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vio_1v8_mhl: regulator-mhl1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_1v8_mhl";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vdd_3v0_touch: regulator-touchpwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v0_touch";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(Q, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vdd_1v8_touch: regulator-touchvio {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_touch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vcc_1v8_gps: regulator-gps {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8_gps";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vio_1v8_front: regulator-frontvio {
+		compatible = "regulator-fixed";
+		regulator-name = "vt_1v8_cam_vio";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio TEGRA_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	sound {
+		nvidia,audio-routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Int Spk", "SPKL",
+			"Int Spk", "SPKR",
+			"Earpiece", "RECL",
+			"Earpiece", "RECR",
+			"INA1", "Mic Jack",
+			"MIC1", "MICBIAS",
+			"MICBIAS", "Internal Mic 1",
+			"MIC2", "Internal Mic 2";
+
+		nvidia,i2s-controller = <&tegra_i2s0>;
+		nvidia,audio-codec = <&max98089>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(BB, 6) GPIO_ACTIVE_LOW>;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_HIGH>;
+		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0) GPIO_ACTIVE_HIGH>;
+		nvidia,coupled-mic-hp-det;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution. The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * this device from getting too hot from a user's
+		 * tactile perspective. The CPU zone is intended to
+		 * protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 50C until temperature drops to 49.8C */
+					temperature = <50000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 60C */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 75C until temperature drops to 74.8C */
+					temperature = <75000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/nvidia/tegra30-ouya.dts
index b7acea39b942..7e3de26ca960 100644
--- a/arch/arm/boot/dts/tegra30-ouya.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-ouya.dts
@@ -26,6 +26,14 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <0x0>;
+			tlm,version-minor = <0x0>;
+		};
+	};
+
 	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
@@ -1996,6 +2004,7 @@
 
 	uartc: serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 		status = "okay";
 
@@ -2025,6 +2034,8 @@
 	};
 
 	uartd: serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -2037,17 +2048,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		cpu_temp: nct1008@4c {
-			compatible = "onnn,nct1008";
-			reg = <0x4c>;
-			vcc-supply = <&sys_3v3_reg>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
-
-			#thermal-sensor-cells = <1>;
-		};
-
 		pmic: pmic@2d {
 			compatible = "ti,tps65911";
 			reg = <0x2d>;
@@ -2161,6 +2161,17 @@
 			};
 		};
 
+		cpu_temp: nct1008@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&sys_3v3_reg>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
 		vdd_core: tps62361@60 {
 			compatible = "ti,tps62361";
 			reg = <0x60>;
@@ -4485,17 +4496,6 @@
 		status = "okay";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-
-		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
-		clock-names = "ext_clock";
-
-		reset-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_LOW>;
-		post-power-on-delay-ms = <300>;
-		power-off-delay-us = <300>;
-	};
-
 	sdmmc3: mmc@78000400 {
 		status = "okay";
 
@@ -4608,15 +4608,7 @@
 		};
 	};
 
-	firmware {
-		trusted-foundations {
-			compatible = "tlm,trusted-foundations";
-			tlm,version-major = <0x0>;
-			tlm,version-minor = <0x0>;
-		};
-	};
-
-	fan: gpio_fan {
+	fan: fan {
 		compatible = "gpio-fan";
 		gpios = <&gpio TEGRA_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map = <0    0
@@ -4624,50 +4616,50 @@
 		#cooling-cells = <2>;
 	};
 
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay = <5000>;
-			polling-delay-passive = <5000>;
+	gpio-keys {
+		compatible = "gpio-keys";
 
-			thermal-sensors = <&cpu_temp 1>;
+		key-power {
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			debounce-interval = <10>;
+			linux,code = <KEY_POWER>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
 
-			trips {
-				cpu_alert0: cpu-alert0 {
-					temperature = <50000>;
-					hysteresis = <10000>;
-					type = "active";
-				};
-				cpu_alert1: cpu-alert1 {
-					temperature = <70000>;
-					hysteresis = <5000>;
-					type = "passive";
-				};
-				cpu_crit: cpu-crit {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
+	leds {
+		compatible = "gpio-leds";
 
-			cooling-maps {
-				map0 {
-					trip = <&cpu_alert0>;
-					cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu_alert1>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&actmon THERMAL_NO_LIMIT
-								  THERMAL_NO_LIMIT>;
-				};
-			};
+		led-power {
+			label = "power-led";
+			gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+			retain-state-suspended;
 		};
 	};
 
-	vdd_12v_in: vdd_12v_in {
+	opp-table-actmon {
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-900000000-1350;
+	};
+
+	wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	vdd_12v_in: regulator-vdd-12v-in {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_12v_in";
 		regulator-min-microvolt = <12000000>;
@@ -4675,7 +4667,7 @@
 		regulator-always-on;
 	};
 
-	sdmmc_3v3_reg: sdmmc_3v3_reg {
+	sdmmc_3v3_reg: regulator-sdmmc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "sdmmc_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -4686,7 +4678,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_fuse_3v3_reg: vdd_fuse_3v3_reg {
+	vdd_fuse_3v3_reg: regulator-vdd-fuse-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_fuse_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -4697,7 +4689,7 @@
 		regulator-always-on;
 	};
 
-	vdd_vid_reg: vdd_vid_reg {
+	vdd_vid_reg: regulator-vdd-vid {
 		compatible = "regulator-fixed";
 		regulator-name = "vddio_vid";
 		regulator-min-microvolt = <5000000>;
@@ -4708,7 +4700,7 @@
 		regulator-boot-on;
 	};
 
-	ddr_reg: ddr_reg {
+	ddr_reg: regulator-ddr {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_ddr";
 		regulator-min-microvolt = <1500000>;
@@ -4720,7 +4712,7 @@
 		vin-supply = <&vdd_12v_in>;
 	};
 
-	sys_3v3_reg: sys_3v3_reg {
+	sys_3v3_reg: regulator-sys-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "sys_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -4732,7 +4724,7 @@
 		vin-supply = <&vdd_12v_in>;
 	};
 
-	vdd_5v0_reg: vdd_5v0_reg {
+	vdd_5v0_reg: regulator-vdd-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -4744,14 +4736,14 @@
 		vin-supply = <&vdd_12v_in>;
 	};
 
-	vdd_smsc: vdd_smsc {
+	vdd_smsc: regulator-vdd-smsc {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_smsc";
 		enable-active-high;
 		gpio = <&gpio TEGRA_GPIO(DD, 5) GPIO_ACTIVE_HIGH>;
 	};
 
-	usb3_vbus_reg: usb3_vbus_reg {
+	usb3_vbus_reg: regulator-usb3-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -4761,36 +4753,46 @@
 		vin-supply = <&vdd_5v0_reg>;
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-power {
-			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			debounce-interval = <10>;
-			linux,code = <KEY_POWER>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-	};
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay = <5000>;
+			polling-delay-passive = <5000>;
 
+			thermal-sensors = <&cpu_temp 1>;
 
-	leds {
-		compatible = "gpio-leds";
+			trips {
+				cpu_alert0: cpu-alert0 {
+					temperature = <50000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				cpu_alert1: cpu-alert1 {
+					temperature = <70000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 
-		led-power {
-			label = "power-led";
-			gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-			retain-state-suspended;
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 	};
 };
-
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp-900000000-1350;
-};
-
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp-900000000;
-};
diff --git a/arch/arm/boot/dts/tegra30-pegatron-chagall.dts b/arch/arm/boot/dts/nvidia/tegra30-pegatron-chagall.dts
index 7c81f0205549..b7d0ebb766a6 100644
--- a/arch/arm/boot/dts/tegra30-pegatron-chagall.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-pegatron-chagall.dts
@@ -37,6 +37,14 @@
 	 */
 	chosen {};
 
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
 	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
@@ -134,7 +142,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			/* SDMMC3 pinmux */
@@ -150,7 +158,6 @@
 				nvidia,pins = "sdmmc3_cmd_pa7",
 						"sdmmc3_dat3_pb4",
 						"sdmmc3_dat2_pb5",
-						"sdmmc3_dat2_pb5",
 						"sdmmc3_dat1_pb6",
 						"sdmmc3_dat0_pb7",
 						"sdmmc3_dat5_pd0",
@@ -622,7 +629,7 @@
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			pu1 {
@@ -689,7 +696,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			vi_d10_pt2 {
@@ -864,7 +871,7 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 				nvidia,lock = <0>;
-				nvidia,ioreset = <0>;
+				nvidia,io-reset = <0>;
 			};
 
 			vi_mclk_pt1 {
@@ -1103,6 +1110,7 @@
 
 	uartb: serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 		status = "okay";
 
@@ -1111,6 +1119,7 @@
 
 	uartc: serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		/delete-property/ reg-shift;
 		status = "okay";
 
@@ -1146,6 +1155,14 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
+		embedded-controller@10 {
+			compatible = "pegatron,chagall-ec";
+			reg = <0x10>;
+
+			monitored-battery = <&battery>;
+			power-supplies = <&mains>;
+		};
+
 		/* Wolfson Microelectronics WM8903 audio codec */
 		wm8903: audio-codec@1a {
 			compatible = "wlf,wm8903";
@@ -1191,16 +1208,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		light-sensor@44 {
-			compatible = "isil,isl29023";
-			reg = <0x44>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(Q, 3) IRQ_TYPE_LEVEL_HIGH>;
-
-			vcc-supply = <&vdd_3v3_sen>;
-		};
-
 		/* AsahiKASEI AK8975 magnetometer sensor */
 		magnetometer@c {
 			compatible = "asahi-kasei,ak8975";
@@ -1214,6 +1221,16 @@
 					 "0",  "0", "-1";
 		};
 
+		light-sensor@44 {
+			compatible = "isil,isl29023";
+			reg = <0x44>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Q, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			vcc-supply = <&vdd_3v3_sen>;
+		};
+
 		gyroscope@68 {
 			compatible = "invensense,mpu3050";
 			reg = <0x68>;
@@ -1260,17 +1277,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		nct72: temperature-sensor@4c {
-			compatible = "onnn,nct1008";
-			reg = <0x4c>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(U, 5) IRQ_TYPE_EDGE_FALLING>;
-
-			vcc-supply = <&vdd_3v3_sys>;
-			#thermal-sensor-cells = <1>;
-		};
-
 		/* Texas Instruments TPS659110 PMIC */
 		pmic: pmic@2d {
 			compatible = "ti,tps65911";
@@ -1401,6 +1407,17 @@
 			};
 		};
 
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 5) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		vdd_core: core-regulator@60 {
 			compatible = "ti,tps62361";
 			reg = <0x60>;
@@ -2507,17 +2524,6 @@
 		vqmmc-supply = <&vddio_usd>; /* ldo3 */
 	};
 
-	brcm_wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-
-		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
-		clock-names = "ext_clock";
-
-		reset-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_LOW>;
-		post-power-on-delay-ms = <300>;
-		power-off-delay-us = <300>;
-	};
-
 	sdmmc3: mmc@78000400 {
 		status = "okay";
 
@@ -2598,6 +2604,14 @@
 		default-brightness-level = <15>;
 	};
 
+	battery: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <3050000>;
+		energy-full-design-microwatt-hours = <23000000>;
+		operating-range-celsius = <0 45>;
+	};
+
 	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
 	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
@@ -2630,7 +2644,7 @@
 	};
 
 	display-panel {
-		compatible = "panel-lvds";
+		compatible = "hannstar,hsd101pww2", "panel-lvds";
 
 		width-mm = <217>;
 		height-mm = <136>;
@@ -2653,7 +2667,6 @@
 
 	extcon-keys {
 		compatible = "gpio-keys";
-		interrupt-parent = <&gpio>;
 
 		switch-dock-insert {
 			label = "Chagall Dock";
@@ -2676,17 +2689,8 @@
 		};
 	};
 
-	firmware {
-		trusted-foundations {
-			compatible = "tlm,trusted-foundations";
-			tlm,version-major = <2>;
-			tlm,version-minor = <8>;
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
-		interrupt-parent = <&gpio>;
 
 		key-power {
 			label = "Power";
@@ -2697,19 +2701,19 @@
 			wakeup-source;
 		};
 
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
 			debounce-interval = <10>;
 			wakeup-event-action = <EV_ACT_ASSERTED>;
 			wakeup-source;
 		};
 
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(Q, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
 			debounce-interval = <10>;
 			wakeup-event-action = <EV_ACT_ASSERTED>;
 			wakeup-source;
@@ -2722,6 +2726,34 @@
 		vcc-supply = <&vdd_3v3_sys>;
 	};
 
+	opp-table-actmon {
+		/delete-node/ opp-625000000;
+		/delete-node/ opp-667000000;
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-625000000-1200;
+		/delete-node/ opp-625000000-1250;
+		/delete-node/ opp-667000000-1200;
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
 	sound {
 		compatible = "pegatron,tegra-audio-wm8903-chagall",
 			     "nvidia,tegra-audio-wm8903";
@@ -2842,20 +2874,3 @@
 		};
 	};
 };
-
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp-625000000-1200;
-	/delete-node/ opp-625000000-1250;
-	/delete-node/ opp-667000000-1200;
-	/delete-node/ opp-750000000-1300;
-	/delete-node/ opp-800000000-1300;
-	/delete-node/ opp-900000000-1350;
-};
-
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp-625000000;
-	/delete-node/ opp-667000000;
-	/delete-node/ opp-750000000;
-	/delete-node/ opp-800000000;
-	/delete-node/ opp-900000000;
-};
diff --git a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi b/arch/arm/boot/dts/nvidia/tegra30-peripherals-opp.dtsi
index d100a1a8b705..a2d557155114 100644
--- a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-peripherals-opp.dtsi
@@ -210,6 +210,20 @@
 			opp-suspend;
 		};
 
+		opp-266500000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <266500000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-266500000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <266500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
 		opp-333500000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <333500000>;
@@ -424,6 +438,12 @@
 			opp-suspend;
 		};
 
+		opp-266500000 {
+			opp-hz = /bits/ 64 <266500000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <2132000>;
+		};
+
 		opp-333500000 {
 			opp-hz = /bits/ 64 <333500000>;
 			opp-supported-hw = <0x000F>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/nvidia/tegra30.dtsi
index 9dab8d2c158a..2a4d93db8134 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30.dtsi
@@ -397,13 +397,6 @@
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 
-		sclk {
-			compatible = "nvidia,tegra30-sclk";
-			clocks = <&tegra_car TEGRA30_CLK_SCLK>;
-			power-domains = <&pd_core>;
-			operating-points-v2 = <&sclk_dvfs_opp_table>;
-		};
-
 		pll-c {
 			compatible = "nvidia,tegra30-pllc";
 			clocks = <&tegra_car TEGRA30_CLK_PLL_C>;
@@ -424,6 +417,13 @@
 			power-domains = <&pd_core>;
 			operating-points-v2 = <&pll_m_dvfs_opp_table>;
 		};
+
+		sclk {
+			compatible = "nvidia,tegra30-sclk";
+			clocks = <&tegra_car TEGRA30_CLK_SCLK>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&sclk_dvfs_opp_table>;
+		};
 	};
 
 	flow-controller@60007000 {
@@ -431,7 +431,7 @@
 		reg = <0x60007000 0x1000>;
 	};
 
-	apbdma: dma@6000a000 {
+	apbdma: dma-controller@6000a000 {
 		compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
 		reg = <0x6000a000 0x1400>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -563,7 +563,6 @@
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_UARTA>;
 		resets = <&tegra_car 6>;
-		reset-names = "serial";
 		dmas = <&apbdma 8>, <&apbdma 8>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -576,7 +575,6 @@
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_UARTB>;
 		resets = <&tegra_car 7>;
-		reset-names = "serial";
 		dmas = <&apbdma 9>, <&apbdma 9>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -589,7 +587,6 @@
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_UARTC>;
 		resets = <&tegra_car 55>;
-		reset-names = "serial";
 		dmas = <&apbdma 10>, <&apbdma 10>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -602,7 +599,6 @@
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_UARTD>;
 		resets = <&tegra_car 65>;
-		reset-names = "serial";
 		dmas = <&apbdma 19>, <&apbdma 19>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -615,7 +611,6 @@
 		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_UARTE>;
 		resets = <&tegra_car 66>;
-		reset-names = "serial";
 		dmas = <&apbdma 20>, <&apbdma 20>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -648,13 +643,6 @@
 		status = "disabled";
 	};
 
-	rtc@7000e000 {
-		compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
-		reg = <0x7000e000 0x100>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_RTC>;
-	};
-
 	i2c@7000c000 {
 		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
 		reg = <0x7000c000 0x100>;
@@ -831,6 +819,13 @@
 		status = "disabled";
 	};
 
+	rtc@7000e000 {
+		compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_RTC>;
+	};
+
 	kbc@7000e200 {
 		compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc";
 		reg = <0x7000e200 0x100>;
@@ -854,6 +849,28 @@
 		};
 
 		powergates {
+			pd_heg: heg {
+				clocks = <&tegra_car TEGRA30_CLK_GR2D>,
+					 <&tegra_car TEGRA30_CLK_EPP>,
+					 <&tegra_car TEGRA30_CLK_HOST1X>;
+				resets = <&mc TEGRA30_MC_RESET_2D>,
+					 <&mc TEGRA30_MC_RESET_EPP>,
+					 <&mc TEGRA30_MC_RESET_HC>,
+					 <&tegra_car TEGRA30_CLK_GR2D>,
+					 <&tegra_car TEGRA30_CLK_EPP>,
+					 <&tegra_car TEGRA30_CLK_HOST1X>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_mpe: mpe {
+				clocks = <&tegra_car TEGRA30_CLK_MPE>;
+				resets = <&mc TEGRA30_MC_RESET_MPE>,
+					 <&tegra_car TEGRA30_CLK_MPE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
 			pd_3d0: td {
 				clocks = <&tegra_car TEGRA30_CLK_GR3D>;
 				resets = <&mc TEGRA30_MC_RESET_3D>,
@@ -870,6 +887,14 @@
 				#power-domain-cells = <0>;
 			};
 
+			pd_vde: vdec {
+				clocks = <&tegra_car TEGRA30_CLK_VDE>;
+				resets = <&mc TEGRA30_MC_RESET_VDE>,
+					 <&tegra_car TEGRA30_CLK_VDE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
 			pd_venc: venc {
 				clocks = <&tegra_car TEGRA30_CLK_ISP>,
 					 <&tegra_car TEGRA30_CLK_VI>,
@@ -882,36 +907,6 @@
 				power-domains = <&pd_core>;
 				#power-domain-cells = <0>;
 			};
-
-			pd_vde: vdec {
-				clocks = <&tegra_car TEGRA30_CLK_VDE>;
-				resets = <&mc TEGRA30_MC_RESET_VDE>,
-					 <&tegra_car TEGRA30_CLK_VDE>;
-				power-domains = <&pd_core>;
-				#power-domain-cells = <0>;
-			};
-
-			pd_mpe: mpe {
-				clocks = <&tegra_car TEGRA30_CLK_MPE>;
-				resets = <&mc TEGRA30_MC_RESET_MPE>,
-					 <&tegra_car TEGRA30_CLK_MPE>;
-				power-domains = <&pd_core>;
-				#power-domain-cells = <0>;
-			};
-
-			pd_heg: heg {
-				clocks = <&tegra_car TEGRA30_CLK_GR2D>,
-					 <&tegra_car TEGRA30_CLK_EPP>,
-					 <&tegra_car TEGRA30_CLK_HOST1X>;
-				resets = <&mc TEGRA30_MC_RESET_2D>,
-					 <&mc TEGRA30_MC_RESET_EPP>,
-					 <&mc TEGRA30_MC_RESET_HC>,
-					 <&tegra_car TEGRA30_CLK_GR2D>,
-					 <&tegra_car TEGRA30_CLK_EPP>,
-					 <&tegra_car TEGRA30_CLK_HOST1X>;
-				power-domains = <&pd_core>;
-				#power-domain-cells = <0>;
-			};
 		};
 	};
 
@@ -1283,10 +1278,7 @@
 			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&{/cpus/cpu@0}>,
-				     <&{/cpus/cpu@1}>,
-				     <&{/cpus/cpu@2}>,
-				     <&{/cpus/cpu@3}>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 	};
 
 	thermal-zones {
diff --git a/arch/arm/boot/dts/nxp/Makefile b/arch/arm/boot/dts/nxp/Makefile
new file mode 100644
index 000000000000..db44e7a0a198
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+subdir-y += imx
+subdir-y += lpc
+subdir-y += ls
+subdir-y += mxs
+subdir-y += vf
diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
new file mode 100644
index 000000000000..de4142e8f3ce
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -0,0 +1,419 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_IMX1) += \
+	imx1-ads.dtb \
+	imx1-apf9328.dtb
+dtb-$(CONFIG_SOC_IMX25) += \
+	imx25-eukrea-mbimxsd25-baseboard.dtb \
+	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \
+	imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
+	imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
+	imx25-karo-tx25.dtb \
+	imx25-pdk.dtb
+dtb-$(CONFIG_SOC_IMX27) += \
+	imx27-apf27.dtb \
+	imx27-apf27dev.dtb \
+	imx27-eukrea-mbimxsd27-baseboard.dtb \
+	imx27-pdk.dtb \
+	imx27-phytec-phycore-rdk.dtb \
+	imx27-phytec-phycard-s-rdk.dtb
+dtb-$(CONFIG_SOC_IMX31) += \
+	imx31-bug.dtb \
+	imx31-lite.dtb
+dtb-$(CONFIG_SOC_IMX35) += \
+	imx35-eukrea-mbimxsd35-baseboard.dtb \
+	imx35-pdk.dtb
+dtb-$(CONFIG_SOC_IMX50) += \
+	imx50-evk.dtb \
+	imx50-kobo-aura.dtb
+dtb-$(CONFIG_SOC_IMX51) += \
+	imx51-apf51.dtb \
+	imx51-apf51dev.dtb \
+	imx51-babbage.dtb \
+	imx51-digi-connectcore-jsk.dtb \
+	imx51-eukrea-mbimxsd51-baseboard.dtb \
+	imx51-ts4800.dtb \
+	imx51-zii-rdu1.dtb \
+	imx51-zii-scu2-mezz.dtb \
+	imx51-zii-scu3-esb.dtb
+dtb-$(CONFIG_SOC_IMX53) += \
+	imx53-ard.dtb \
+	imx53-cx9020.dtb \
+	imx53-kp-ddc.dtb \
+	imx53-kp-hsc.dtb \
+	imx53-m53evk.dtb \
+	imx53-m53menlo.dtb \
+	imx53-mba53.dtb \
+	imx53-ppd.dtb \
+	imx53-qsb.dtb \
+	imx53-qsb-hdmi.dtb \
+	imx53-qsrb.dtb \
+	imx53-qsrb-hdmi.dtb \
+	imx53-sk-imx53.dtb \
+	imx53-sk-imx53-atm0700d4-lvds.dtb \
+	imx53-sk-imx53-atm0700d4-rgb.dtb \
+	imx53-smd.dtb \
+	imx53-tx53-x03x.dtb \
+	imx53-tx53-x13x.dtb \
+	imx53-usbarmory.dtb \
+	imx53-voipac-bsb.dtb
+imx53-qsb-hdmi-dtbs := imx53-qsb.dtb imx53-qsb-hdmi.dtbo
+imx53-qsrb-hdmi-dtbs := imx53-qsrb.dtb imx53-qsb-hdmi.dtbo
+dtb-$(CONFIG_SOC_IMX6Q) += \
+	imx6dl-alti6p.dtb \
+	imx6dl-apf6dev.dtb \
+	imx6dl-aristainetos_4.dtb \
+	imx6dl-aristainetos_7.dtb \
+	imx6dl-aristainetos2_4.dtb \
+	imx6dl-aristainetos2_7.dtb \
+	imx6dl-colibri-aster.dtb \
+	imx6dl-colibri-eval-v3.dtb \
+	imx6dl-colibri-iris.dtb \
+	imx6dl-colibri-iris-v2.dtb \
+	imx6dl-colibri-v1.2-aster.dtb \
+	imx6dl-colibri-v1.2-eval-v3.dtb \
+	imx6dl-colibri-v1.2-iris.dtb \
+	imx6dl-colibri-v1.2-iris-v2.dtb \
+	imx6dl-cubox-i.dtb \
+	imx6dl-cubox-i-emmc-som-v15.dtb \
+	imx6dl-cubox-i-som-v15.dtb \
+	imx6dl-dfi-fs700-m60.dtb \
+	imx6dl-dhcom-pdk2.dtb \
+	imx6dl-dhcom-picoitx.dtb \
+	imx6dl-eckelmann-ci4x10.dtb \
+	imx6dl-emcon-avari.dtb \
+	imx6dl-gw51xx.dtb \
+	imx6dl-gw52xx.dtb \
+	imx6dl-gw53xx.dtb \
+	imx6dl-gw54xx.dtb \
+	imx6dl-gw551x.dtb \
+	imx6dl-gw552x.dtb \
+	imx6dl-gw553x.dtb \
+	imx6dl-gw560x.dtb \
+	imx6dl-gw5903.dtb \
+	imx6dl-gw5904.dtb \
+	imx6dl-gw5907.dtb \
+	imx6dl-gw5910.dtb \
+	imx6dl-gw5912.dtb \
+	imx6dl-gw5913.dtb \
+	imx6dl-hummingboard.dtb \
+	imx6dl-hummingboard-emmc-som-v15.dtb \
+	imx6dl-hummingboard-som-v15.dtb \
+	imx6dl-hummingboard2.dtb \
+	imx6dl-hummingboard2-emmc-som-v15.dtb \
+	imx6dl-hummingboard2-som-v15.dtb \
+	imx6dl-icore.dtb \
+	imx6dl-icore-mipi.dtb \
+	imx6dl-icore-rqs.dtb \
+	imx6dl-kontron-samx6i-ads2.dtb \
+	imx6dl-lanmcu.dtb \
+	imx6dl-mamoj.dtb \
+	imx6dl-mba6a.dtb \
+	imx6dl-mba6b.dtb \
+	imx6dl-nit6xlite.dtb \
+	imx6dl-nitrogen6x.dtb \
+	imx6dl-phytec-mira-rdk-nand.dtb \
+	imx6dl-phytec-pbab01.dtb \
+	imx6dl-pico-dwarf.dtb \
+	imx6dl-pico-hobbit.dtb \
+	imx6dl-pico-nymph.dtb \
+	imx6dl-pico-pi.dtb \
+	imx6dl-plybas.dtb \
+	imx6dl-plym2m.dtb \
+	imx6dl-prtmvt.dtb \
+	imx6dl-prtrvt.dtb \
+	imx6dl-prtvt7.dtb \
+	imx6dl-rex-basic.dtb \
+	imx6dl-riotboard.dtb \
+	imx6dl-sabreauto.dtb \
+	imx6dl-sabrelite.dtb \
+	imx6dl-sabresd.dtb \
+	imx6dl-savageboard.dtb \
+	imx6dl-sielaff.dtb \
+	imx6dl-skov-revc-lt2.dtb \
+	imx6dl-skov-revc-lt6.dtb \
+	imx6dl-solidsense.dtb \
+	imx6dl-ts4900.dtb \
+	imx6dl-ts7970.dtb \
+	imx6dl-tx6dl-comtft.dtb \
+	imx6dl-tx6s-8034.dtb \
+	imx6dl-tx6s-8034-mb7.dtb \
+	imx6dl-tx6s-8035.dtb \
+	imx6dl-tx6s-8035-mb7.dtb \
+	imx6dl-tx6u-801x.dtb \
+	imx6dl-tx6u-80xx-mb7.dtb \
+	imx6dl-tx6u-8033.dtb \
+	imx6dl-tx6u-8033-mb7.dtb \
+	imx6dl-tx6u-811x.dtb \
+	imx6dl-tx6u-81xx-mb7.dtb \
+	imx6dl-udoo.dtb \
+	imx6dl-victgo.dtb \
+	imx6dl-vicut1.dtb \
+	imx6dl-wandboard.dtb \
+	imx6dl-wandboard-revb1.dtb \
+	imx6dl-wandboard-revd1.dtb \
+	imx6dl-yapp4-draco.dtb \
+	imx6dl-yapp4-hydra.dtb \
+	imx6dl-yapp4-lynx.dtb \
+	imx6dl-yapp4-orion.dtb \
+	imx6dl-yapp4-phoenix.dtb \
+	imx6dl-yapp4-ursa.dtb \
+	imx6q-apalis-eval.dtb \
+	imx6q-apalis-eval-v1.2.dtb \
+	imx6q-apalis-ixora.dtb \
+	imx6q-apalis-ixora-v1.1.dtb \
+	imx6q-apalis-ixora-v1.2.dtb \
+	imx6q-apalis-v1.2-eval.dtb \
+	imx6q-apalis-v1.2-eval-v1.2.dtb \
+	imx6q-apalis-v1.2-ixora.dtb \
+	imx6q-apalis-v1.2-ixora-v1.1.dtb \
+	imx6q-apalis-v1.2-ixora-v1.2.dtb \
+	imx6q-apf6dev.dtb \
+	imx6q-arm2.dtb \
+	imx6q-b450v3.dtb \
+	imx6q-b650v3.dtb \
+	imx6q-b850v3.dtb \
+	imx6q-bosch-acc.dtb \
+	imx6q-cm-fx6.dtb \
+	imx6q-cubox-i.dtb \
+	imx6q-cubox-i-emmc-som-v15.dtb \
+	imx6q-cubox-i-som-v15.dtb \
+	imx6q-dfi-fs700-m60.dtb \
+	imx6q-dhcom-pdk2.dtb \
+	imx6q-display5-tianma-tm070-1280x768.dtb \
+	imx6q-dmo-edmqmx6.dtb \
+	imx6q-dms-ba16.dtb \
+	imx6q-ds.dtb \
+	imx6q-emcon-avari.dtb \
+	imx6q-evi.dtb \
+	imx6dl-b105pv2.dtb \
+	imx6dl-b105v2.dtb \
+	imx6dl-b125v2.dtb \
+	imx6dl-b125pv2.dtb \
+	imx6dl-b155v2.dtb \
+	imx6q-gk802.dtb \
+	imx6q-gw51xx.dtb \
+	imx6q-gw52xx.dtb \
+	imx6q-gw53xx.dtb \
+	imx6q-gw5400-a.dtb \
+	imx6q-gw54xx.dtb \
+	imx6q-gw551x.dtb \
+	imx6q-gw552x.dtb \
+	imx6q-gw553x.dtb \
+	imx6q-gw560x.dtb \
+	imx6q-gw5903.dtb \
+	imx6q-gw5904.dtb \
+	imx6q-gw5907.dtb \
+	imx6q-gw5910.dtb \
+	imx6q-gw5912.dtb \
+	imx6q-gw5913.dtb \
+	imx6q-h100.dtb \
+	imx6q-hummingboard.dtb \
+	imx6q-hummingboard-emmc-som-v15.dtb \
+	imx6q-hummingboard-som-v15.dtb \
+	imx6q-hummingboard2.dtb \
+	imx6q-hummingboard2-emmc-som-v15.dtb \
+	imx6q-hummingboard2-som-v15.dtb \
+	imx6q-icore.dtb \
+	imx6q-icore-mipi.dtb \
+	imx6q-icore-ofcap10.dtb \
+	imx6q-icore-ofcap12.dtb \
+	imx6q-icore-rqs.dtb \
+	imx6q-kontron-samx6i-ads2.dtb \
+	imx6q-kp-tpc.dtb \
+	imx6q-logicpd.dtb \
+	imx6q-lxr.dtb \
+	imx6q-marsboard.dtb \
+	imx6q-mba6a.dtb \
+	imx6q-mba6b.dtb \
+	imx6q-mccmon6.dtb \
+	imx6q-nitrogen6x.dtb \
+	imx6q-nitrogen6_max.dtb \
+	imx6q-nitrogen6_som2.dtb \
+	imx6q-novena.dtb \
+	imx6q-phytec-mira-rdk-emmc.dtb \
+	imx6q-phytec-mira-rdk-nand.dtb \
+	imx6q-phytec-pbab01.dtb \
+	imx6q-pico-dwarf.dtb \
+	imx6q-pico-hobbit.dtb \
+	imx6q-pico-nymph.dtb \
+	imx6q-pico-pi.dtb \
+	imx6q-pistachio.dtb \
+	imx6q-prti6q.dtb \
+	imx6q-prtwd2.dtb \
+	imx6q-rex-pro.dtb \
+	imx6q-sabreauto.dtb \
+	imx6q-sabrelite.dtb \
+	imx6q-sabresd.dtb \
+	imx6q-savageboard.dtb \
+	imx6q-sbc6x.dtb \
+	imx6q-skov-revc-lt2.dtb \
+	imx6q-skov-revc-lt6.dtb \
+	imx6q-skov-reve-mi1010ait-1cp1.dtb \
+	imx6q-solidsense.dtb \
+	imx6q-tbs2910.dtb \
+	imx6q-ts4900.dtb \
+	imx6q-ts7970.dtb \
+	imx6q-tx6q-1010.dtb \
+	imx6q-tx6q-1010-comtft.dtb \
+	imx6q-tx6q-1020.dtb \
+	imx6q-tx6q-1020-comtft.dtb \
+	imx6q-tx6q-1036.dtb \
+	imx6q-tx6q-1036-mb7.dtb \
+	imx6q-tx6q-10x0-mb7.dtb \
+	imx6q-tx6q-1110.dtb \
+	imx6q-tx6q-11x0-mb7.dtb \
+	imx6q-udoo.dtb \
+	imx6q-utilite-pro.dtb \
+	imx6q-var-dt6customboard.dtb \
+	imx6q-var-mx6customboard.dtb \
+	imx6q-vicut1.dtb \
+	imx6q-wandboard.dtb \
+	imx6q-wandboard-revb1.dtb \
+	imx6q-wandboard-revd1.dtb \
+	imx6q-yapp4-crux.dtb \
+	imx6q-yapp4-pegasus.dtb \
+	imx6q-zii-rdu2.dtb \
+	imx6qp-mba6b.dtb \
+	imx6qp-nitrogen6_max.dtb \
+	imx6qp-nitrogen6_som2.dtb \
+	imx6qp-phytec-mira-rdk-nand.dtb \
+	imx6qp-prtwd3.dtb \
+	imx6qp-sabreauto.dtb \
+	imx6qp-sabresd.dtb \
+	imx6qp-tx6qp-8037.dtb \
+	imx6qp-tx6qp-8037-mb7.dtb \
+	imx6qp-tx6qp-8137.dtb \
+	imx6qp-tx6qp-8137-mb7.dtb \
+	imx6qp-vicutp.dtb \
+	imx6qp-wandboard-revd1.dtb \
+	imx6qp-yapp4-crux-plus.dtb \
+	imx6qp-yapp4-pegasus-plus.dtb \
+	imx6qp-zii-rdu2.dtb \
+	imx6s-dhcom-drc02.dtb
+dtb-$(CONFIG_SOC_IMX6SL) += \
+	imx6sl-evk.dtb \
+	imx6sl-kobo-aura2.dtb \
+	imx6sl-tolino-shine2hd.dtb \
+	imx6sl-tolino-shine3.dtb \
+	imx6sl-tolino-vision.dtb \
+	imx6sl-tolino-vision5.dtb \
+	imx6sl-warp.dtb
+dtb-$(CONFIG_SOC_IMX6SLL) += \
+	imx6sll-evk.dtb \
+	imx6sll-kobo-clarahd.dtb \
+	imx6sll-kobo-clara2e-a.dtb \
+	imx6sll-kobo-clara2e-b.dtb \
+	imx6sll-kobo-librah2o.dtb
+dtb-$(CONFIG_SOC_IMX6SX) += \
+	imx6sx-nitrogen6sx.dtb \
+	imx6sx-sabreauto.dtb \
+	imx6sx-sdb-reva.dtb \
+	imx6sx-sdb-sai.dtb \
+	imx6sx-sdb.dtb \
+	imx6sx-sdb-mqs.dtb \
+	imx6sx-softing-vining-2000.dtb \
+	imx6sx-udoo-neo-basic.dtb \
+	imx6sx-udoo-neo-extended.dtb \
+	imx6sx-udoo-neo-full.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += \
+	imx6ul-14x14-evk.dtb \
+	imx6ul-ccimx6ulsbcexpress.dtb \
+	imx6ul-ccimx6ulsbcpro.dtb \
+	imx6ul-geam.dtb \
+	imx6ul-isiot-emmc.dtb \
+	imx6ul-isiot-nand.dtb \
+	imx6ul-kontron-bl.dtb \
+	imx6ul-kontron-bl-43.dtb \
+	imx6ul-liteboard.dtb \
+	imx6ul-tqma6ul1-mba6ulx.dtb \
+	imx6ul-tqma6ul2-mba6ulx.dtb \
+	imx6ul-tqma6ul2l-mba6ulx.dtb \
+	imx6ul-opos6uldev.dtb \
+	imx6ul-pico-dwarf.dtb \
+	imx6ul-pico-hobbit.dtb \
+	imx6ul-pico-pi.dtb \
+	imx6ul-phytec-segin-ff-rdk-emmc.dtb \
+	imx6ul-phytec-segin-ff-rdk-nand.dtb \
+	imx6ul-prti6g.dtb \
+	imx6ul-tx6ul-0010.dtb \
+	imx6ul-tx6ul-0011.dtb \
+	imx6ul-tx6ul-mainboard.dtb \
+	imx6ul-var-som-concerto.dtb \
+	imx6ull-14x14-evk.dtb \
+	imx6ull-colibri-aster.dtb \
+	imx6ull-colibri-emmc-aster.dtb \
+	imx6ull-colibri-emmc-eval-v3.dtb \
+	imx6ull-colibri-emmc-iris.dtb \
+	imx6ull-colibri-emmc-iris-v2.dtb \
+	imx6ull-colibri-eval-v3.dtb \
+	imx6ull-colibri-iris.dtb \
+	imx6ull-colibri-iris-v2.dtb \
+	imx6ull-colibri-wifi-aster.dtb \
+	imx6ull-colibri-wifi-eval-v3.dtb \
+	imx6ull-colibri-wifi-iris.dtb \
+	imx6ull-colibri-wifi-iris-v2.dtb \
+	imx6ull-dhcom-drc02.dtb \
+	imx6ull-dhcom-pdk2.dtb \
+	imx6ull-dhcom-picoitx.dtb \
+	imx6ull-dhcor-maveo-box.dtb \
+	imx6ull-engicam-microgea-bmm.dtb \
+	imx6ull-engicam-microgea-gtw.dtb \
+	imx6ull-engicam-microgea-rmm.dtb \
+	imx6ull-jozacp.dtb \
+	imx6ull-kontron-bl.dtb \
+	imx6ull-myir-mys-6ulx-eval.dtb \
+	imx6ull-opos6uldev.dtb \
+	imx6ull-phytec-segin-ff-rdk-nand.dtb \
+	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
+	imx6ull-phytec-segin-lc-rdk-nand.dtb \
+	imx6ull-phytec-tauri-emmc.dtb \
+	imx6ull-phytec-tauri-nand.dtb \
+	imx6ull-seeed-npi-dev-board-emmc.dtb \
+	imx6ull-seeed-npi-dev-board-nand.dtb \
+	imx6ull-tarragon-master.dtb \
+	imx6ull-tarragon-micro.dtb \
+	imx6ull-tarragon-slave.dtb \
+	imx6ull-tarragon-slavext.dtb \
+	imx6ull-tqma6ull2-mba6ulx.dtb \
+	imx6ull-tqma6ull2l-mba6ulx.dtb \
+	imx6ull-uti260b.dtb \
+	imx6ulz-14x14-evk.dtb \
+	imx6ulz-bsh-smm-m2.dtb
+dtb-$(CONFIG_SOC_IMX7D) += \
+	imx7d-cl-som-imx7.dtb \
+	imx7d-colibri-aster.dtb \
+	imx7d-colibri-emmc-aster.dtb \
+	imx7d-colibri-emmc-iris.dtb \
+	imx7d-colibri-emmc-iris-v2.dtb \
+	imx7d-colibri-emmc-eval-v3.dtb \
+	imx7d-colibri-eval-v3.dtb \
+	imx7d-colibri-iris.dtb \
+	imx7d-colibri-iris-v2.dtb \
+	imx7d-flex-concentrator.dtb \
+	imx7d-flex-concentrator-mfg.dtb \
+	imx7d-mba7.dtb \
+	imx7d-meerkat96.dtb \
+	imx7d-nitrogen7.dtb \
+	imx7d-pico-dwarf.dtb \
+	imx7d-pico-hobbit.dtb \
+	imx7d-pico-nymph.dtb \
+	imx7d-pico-pi.dtb \
+	imx7d-remarkable2.dtb \
+	imx7d-sbc-imx7.dtb \
+	imx7d-sdb.dtb \
+	imx7d-sdb-reva.dtb \
+	imx7d-sdb-sht11.dtb \
+	imx7d-smegw01.dtb \
+	imx7d-zii-rmu2.dtb \
+	imx7d-zii-rpu2.dtb \
+	imx7s-colibri-aster.dtb \
+	imx7s-colibri-eval-v3.dtb \
+	imx7s-colibri-iris.dtb \
+	imx7s-colibri-iris-v2.dtb \
+	imx7s-mba7.dtb \
+	imx7s-warp.dtb
+dtb-$(CONFIG_SOC_IMX7ULP) += \
+	imx7ulp-com.dtb \
+	imx7ulp-evk.dtb
+dtb-$(CONFIG_SOC_IMXRT) += \
+	imxrt1050-evk.dtb
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/nxp/imx/e60k02.dtsi
index 935e2359f8df..0029c12f16c8 100644
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/e60k02.dtsi
@@ -14,6 +14,10 @@
 #include <dt-bindings/input/input.h>
 
 / {
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+	};
 
 	chosen {
 		stdout-path = &uart1;
@@ -104,7 +108,16 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	/* TODO: CYTTSP5 touch controller at 0x24 */
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cyttsp5_gpio>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&ldo5_reg>;
+	};
 
 	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
 
@@ -118,7 +131,7 @@
 		compatible = "ricoh,rc5t619";
 		reg = <0x32>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		system-power-controller;
 
 		regulators {
@@ -302,6 +315,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git a/arch/arm/boot/dts/e70k02.dtsi b/arch/arm/boot/dts/nxp/imx/e70k02.dtsi
index 27ef9a62b23c..dcc3c9d488a8 100644
--- a/arch/arm/boot/dts/e70k02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/e70k02.dtsi
@@ -122,7 +122,16 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	/* TODO: CYTTSP5 touch controller at 0x24 */
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cyttsp5_gpio>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&ldo5_reg>;
+	};
 
 	/* TODO: SY7636 PMIC for E Ink at 0x62 */
 
@@ -136,7 +145,7 @@
 		compatible = "ricoh,rc5t619";
 		reg = <0x32>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 		system-power-controller;
 
 		regulators {
@@ -312,6 +321,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
index 5833fb6f15d8..2c817c4a4c68 100644
--- a/arch/arm/boot/dts/imx1-ads.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
@@ -65,7 +65,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <4>;
diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
index 77b21aa7a146..058e9435524f 100644
--- a/arch/arm/boot/dts/imx1-apf9328.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
@@ -45,7 +45,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
@@ -54,14 +54,12 @@
 		#size-cells = <1>;
 	};
 
-	eth: eth@4,c00000 {
+	eth: ethernet@4,c00000 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_eth>;
 		compatible = "davicom,dm9000";
-		reg = <
-			4 0x00c00000 0x2
-			4 0x00c00002 0x2
-		>;
+		reg = <4 0x00c00000 0x2>,
+		      <4 0x00c00002 0x2>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
 		fsl,weim-cs-timing = <0x0000c700 0x19190d01>;
diff --git a/arch/arm/boot/dts/imx1-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx1-pinfunc.h
index bd2e679cb26c..bd2e679cb26c 100644
--- a/arch/arm/boot/dts/imx1-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx1-pinfunc.h
diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/nxp/imx/imx1.dtsi
index e312f1e74e2f..a1a89ccacf05 100644
--- a/arch/arm/boot/dts/imx1.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx1.dtsi
@@ -68,7 +68,7 @@
 		interrupt-parent = <&aitc>;
 		ranges;
 
-		aipi@200000 {
+		bus@200000 {
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -134,7 +134,7 @@
 				clock-names = "ipg", "per";
 			};
 
-			dma: dma@209000 {
+			dma: dma-controller@209000 {
 				compatible = "fsl,imx1-dma";
 				reg = <0x00209000 0x1000>;
 				interrupts = <61 60>;
@@ -155,7 +155,7 @@
 			};
 		};
 
-		aipi@210000 {
+		bus@210000 {
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -251,7 +251,7 @@
 			};
 		};
 
-		weim: weim@220000 {
+		weim: memory-controller@220000 {
 			#address-cells = <2>;
 			#size-cells = <1>;
 			compatible = "fsl,imx1-weim";
@@ -268,9 +268,12 @@
 			status = "disabled";
 		};
 
-		esram: esram@300000 {
+		esram: sram@300000 {
 			compatible = "mmio-sram";
 			reg = <0x00300000 0x20000>;
+			ranges = <0 0x00300000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
index 0703f62d10d1..93a6e4e680b4 100644
--- a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
@@ -27,7 +27,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
new file mode 100644
index 000000000000..6cddb2cc36fe
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the CMO-QVGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	cmo_qvga: display {
+		model = "CMO-QVGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xcad08b80>;
+		bus-width = <18>;
+		display-timings {
+			native-mode = <&qvga_timings>;
+			qvga_timings: timing0 {
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <30>;
+				hfront-porch = <38>;
+				vback-porch = <20>;
+				vfront-porch = <3>;
+				hsync-len = <15>;
+				vsync-len = <4>;
+			};
+		};
+	};
+
+	reg_lcd_3v3: regulator-0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga {
+		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+			fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
+		};
+	};
+};
+
+&lcdc {
+	display = <&cmo_qvga>;
+	fsl,lpccr = <0x00a903ff>;
+	lcd-supply = <&reg_lcd_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
index 80a7f96de4c6..64b2ffac463b 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_svga_timings>;
-			dvi_svga_timings: 800x600 {
+			dvi_svga_timings: timing0 {
 				clock-frequency = <40000000>;
 				hactive = <800>;
 				vactive = <600>;
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
index 24027a1fb46d..fb074bfdaa8d 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_vga_timings>;
-			dvi_vga_timings: 640x480 {
+			dvi_vga_timings: timing0 {
 				clock-frequency = <31250000>;
 				hactive = <640>;
 				vactive = <480>;
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard.dts
index 3f38c2e60a74..c7207ea437c4 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -13,12 +13,12 @@
 	model = "Eukrea MBIMXSD25";
 	compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 
-		bp1 {
+		button {
 			label = "BP1";
 			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-karo-tx25.dts b/arch/arm/boot/dts/nxp/imx/imx25-karo-tx25.dts
new file mode 100644
index 000000000000..458b94d3d4ed
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx25-karo-tx25.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx25.dtsi"
+
+/ {
+	model = "Ka-Ro TX25";
+	compatible = "karo,imx25-tx25", "fsl,imx25";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_fec_phy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-phy";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 9 0>;
+		enable-active-high;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX25_PAD_UART1_TXD__UART1_TXD 0x00000020
+			MX25_PAD_UART1_RXD__UART1_RXD 0x000000a0
+			MX25_PAD_UART1_CTS__UART1_CTS 0x00000060
+			MX25_PAD_UART1_RTS__UART1_RTS 0x000000e0
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX25_PAD_D11__GPIO_4_9		0x00000021 /* FEC PHY power on pin */
+			MX25_PAD_D13__GPIO_4_7		0x000000a1 /* FEC reset */
+			MX25_PAD_FEC_MDC__FEC_MDC	0x00000060
+			MX25_PAD_FEC_MDIO__FEC_MDIO	0x000001f0
+			MX25_PAD_FEC_TDATA0__FEC_TDATA0	0x00000060
+			MX25_PAD_FEC_TDATA1__FEC_TDATA1	0x00000060
+			MX25_PAD_FEC_TX_EN__FEC_TX_EN	0x00000060
+			MX25_PAD_FEC_RDATA0__FEC_RDATA0	0x000000c1
+			MX25_PAD_FEC_RDATA1__FEC_RDATA1	0x000000c0
+			MX25_PAD_FEC_RX_DV__FEC_RX_DV	0x000000c0
+			MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	0x000000c0
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			MX25_PAD_NF_CE0__NF_CE0		0x00000001
+			MX25_PAD_NFWE_B__NFWE_B		0x80000000
+			MX25_PAD_NFRE_B__NFRE_B		0x80000000
+			MX25_PAD_NFALE__NFALE		0x80000000
+			MX25_PAD_NFCLE__NFCLE		0x80000000
+			MX25_PAD_NFWP_B__NFWP_B		0x80000000
+			MX25_PAD_NFRB__NFRB		0x000000e0
+			MX25_PAD_D7__D7			0x00000080
+			MX25_PAD_D6__D6			0x00000080
+			MX25_PAD_D5__D5			0x00000080
+			MX25_PAD_D4__D4			0x00000080
+			MX25_PAD_D3__D3			0x00000080
+			MX25_PAD_D2__D2			0x00000080
+			MX25_PAD_D1__D1			0x00000000
+			MX25_PAD_D0__D0			0x00000080
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_fec_phy>;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-on-flash-bbt;
+	nand-ecc-mode = "hw";
+	nand-bus-width = <8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
index fb66884d8a2f..dd176fb54e58 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
@@ -16,45 +16,35 @@
 		reg = <0x80000000 0x4000000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_fec_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "fec-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 3 0>;
-			enable-active-high;
-		};
+	reg_fec_3v3: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 3 0>;
+		enable-active-high;
+	};
 
-		reg_2p5v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-		};
+	reg_2p5v: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
 
-		reg_3p3v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
+	reg_3p3v: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
-		reg_can_3v3: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "can-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 6 0>;
-		};
+	reg_can_3v3: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 6 0>;
 	};
 
 	sound {
@@ -78,7 +68,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&wvga_timings>;
-			wvga_timings: 640x480 {
+			wvga_timings: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <45>;
@@ -132,6 +122,7 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks 129>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx25-pinfunc.h
index 908caf810351..908caf810351 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx25-pinfunc.h
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25.dtsi
index bc4de0c05511..82601a4b7b4b 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx25.dtsi
@@ -68,6 +68,16 @@
 		};
 	};
 
+	usbphy0: usb-phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	usbphy1: usb-phy1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -93,7 +103,7 @@
 				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 				reg = <0x43f80000 0x4000>;
 				clocks = <&clks 48>;
-				clock-names = "";
+				clock-names = "ipg";
 				interrupts = <3>;
 				status = "disabled";
 			};
@@ -104,7 +114,7 @@
 				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 				reg = <0x43f84000 0x4000>;
 				clocks = <&clks 48>;
-				clock-names = "";
+				clock-names = "ipg";
 				interrupts = <10>;
 				status = "disabled";
 			};
@@ -151,7 +161,7 @@
 				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 				reg = <0x43f98000 0x4000>;
 				clocks = <&clks 48>;
-				clock-names = "";
+				clock-names = "ipg";
 				interrupts = <4>;
 				status = "disabled";
 			};
@@ -178,12 +188,9 @@
 			};
 
 			kpp: kpp@43fa8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
 				reg = <0x43fa8000 0x4000>;
 				clocks = <&clks 102>;
-				clock-names = "";
 				interrupts = <24>;
 				status = "disabled";
 			};
@@ -515,7 +522,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			sdma: sdma@53fd4000 {
+			sdma: dma-controller@53fd4000 {
 				compatible = "fsl,imx25-sdma";
 				reg = <0x53fd4000 0x4000>;
 				clocks = <&clks 112>, <&clks 68>;
@@ -529,7 +536,6 @@
 				compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
 				reg = <0x53fdc000 0x4000>;
 				clocks = <&clks 126>;
-				clock-names = "";
 				interrupts = <55>;
 			};
 
@@ -543,7 +549,7 @@
 			};
 
 			iim: efuse@53ff0000 {
-				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
+				compatible = "fsl,imx25-iim";
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <19>;
 				clocks = <&clks 99>;
@@ -583,10 +589,9 @@
 			};
 
 			dryice@53ffc000 {
-				compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
+				compatible = "fsl,imx25-rtc";
 				reg = <0x53ffc000 0x4000>;
 				clocks = <&clks 81>;
-				clock-names = "ipg";
 				interrupts = <25 56>;
 			};
 		};
@@ -594,16 +599,19 @@
 		iram: sram@78000000 {
 			compatible = "mmio-sram";
 			reg = <0x78000000 0x20000>;
+			ranges = <0 0x78000000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
-		emi@80000000 {
+		bus@80000000 {
 			compatible = "fsl,emi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x80000000 0x3b002000>;
 			ranges;
 
-			nfc: nand@bb000000 {
+			nfc: nand-controller@bb000000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 
@@ -616,22 +624,4 @@
 			};
 		};
 	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usb-phy@0 {
-			reg = <0>;
-			compatible = "usb-nop-xceiv";
-			#phy-cells = <0>;
-		};
-
-		usbphy1: usb-phy@1 {
-			reg = <1>;
-			compatible = "usb-nop-xceiv";
-			#phy-cells = <0>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/nxp/imx/imx27-apf27.dts
index 745d5d409952..745d5d409952 100644
--- a/arch/arm/boot/dts/imx27-apf27.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-apf27.dts
diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
index 6f1e8ce9e76e..849306cb4532 100644
--- a/arch/arm/boot/dts/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
@@ -16,7 +16,7 @@
 		fsl,pcr = <0xfae80083>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 800x480 {
+			timing0: timing0 {
 				clock-frequency = <33000033>;
 				hactive = <800>;
 				vactive = <480>;
@@ -47,26 +47,19 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		user {
+		led-user {
 			label = "Heartbeat";
 			gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_max5821: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "max5821-reg";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
+	reg_max5821: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "max5821-reg";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
index 74110bbcd9d4..c7e923584878 100644
--- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
@@ -33,7 +33,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
@@ -90,7 +90,7 @@
 &weim {
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
index 9c3ec82ec7e5..d78793601306 100644
--- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -16,7 +16,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 320x240 {
+			timing0: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
@@ -54,22 +54,15 @@
 		};
 	};
 
-	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
-
-		reg_lcd: regulator@0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcdreg>;
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "LCD";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_lcd: regulator-0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcdreg>;
+		regulator-name = "LCD";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts
index 35123b7cb6b3..21d436972aa4 100644
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts
@@ -14,18 +14,12 @@
 		reg = <0xa0000000 0x08000000>;
 	};
 
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+
+	usbphy0: usbphy {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
index 188639738dc3..27c93b9fe049 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
@@ -19,7 +19,7 @@
 		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 640x480 {
+			timing0: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <112>;
@@ -33,19 +33,12 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3v3: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi
new file mode 100644
index 000000000000..31b3fc972abb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
+ * and Markus Pargmann, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Phytec pca100";
+	compatible = "phytec,imx27-pca100", "fsl,imx27";
+
+	memory@a0000000 {
+		device_type = "memory";
+		reg = <0xa0000000 0x08000000>; /* 128MB */
+	};
+
+	usbotgphy: usbotgphy {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgphy>;
+		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+		#phy-cells = <0>;
+	};
+
+	usbh2phy: usbh2phy {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh2phy>;
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+		#phy-cells = <0>;
+	};
+};
+
+&cspi1 {
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>,
+		   <&gpio4 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
+
+&iomuxc {
+	imx27-phycard-s-som {
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB 0x0
+				MX27_PAD_NFCLE__NFCLE 0x0
+				MX27_PAD_NFWP_B__NFWP_B 0x0
+				MX27_PAD_NFCE_B__NFCE_B 0x0
+				MX27_PAD_NFALE__NFALE 0x0
+				MX27_PAD_NFRE_B__NFRE_B 0x0
+				MX27_PAD_NFWE_B__NFWE_B 0x0
+			>;
+		};
+
+		pinctrl_usbotgphy: usbotgphygrp {
+			fsl,pins = <
+				MX27_PAD_USBH1_RCV__GPIO2_25		0x1 /* reset gpio */
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK		0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR		0x0
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT		0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP		0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0	0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1	0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2	0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3	0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4	0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5	0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6	0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7	0x0
+			>;
+		};
+
+		pinctrl_usbh2phy: usbh2phygrp {
+			fsl,pins = <
+				MX27_PAD_USBH1_SUSP__GPIO2_22		0x0 /* reset gpio */
+			>;
+		};
+
+		pinctrl_usbh2: usbh2grp {
+			fsl,pins = <
+				MX27_PAD_USBH2_CLK__USBH2_CLK		0x0
+				MX27_PAD_USBH2_DIR__USBH2_DIR		0x0
+				MX27_PAD_USBH2_NXT__USBH2_NXT		0x0
+				MX27_PAD_USBH2_STP__USBH2_STP		0x0
+				MX27_PAD_CSPI2_SCLK__USBH2_DATA0	0x0
+				MX27_PAD_CSPI2_MOSI__USBH2_DATA1	0x0
+				MX27_PAD_CSPI2_MISO__USBH2_DATA2	0x0
+				MX27_PAD_CSPI2_SS1__USBH2_DATA3		0x0
+				MX27_PAD_CSPI2_SS2__USBH2_DATA4		0x0
+				MX27_PAD_CSPI1_SS2__USBH2_DATA5		0x0
+				MX27_PAD_CSPI2_SS0__USBH2_DATA6		0x0
+				MX27_PAD_USBH2_DATA7__USBH2_DATA7	0x0
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "ulpi";
+	phys = <&usbotgphy>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	phy_type = "ulpi";
+	phys = <&usbh2phy>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
index 344e77790152..b8048e12e3d9 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
@@ -19,7 +19,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 240x320 {
+			timing0: timing0 {
 				clock-frequency = <5500000>;
 				hactive = <240>;
 				vactive = <320>;
@@ -37,29 +37,23 @@
 		};
 	};
 
-	regulators {
-		regulator@2 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_csien>;
-			reg = <2>;
-			regulator-name = "CSI_EN";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
-			regulator-always-on;
-		};
+	regulator-2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_csien>;
+		regulator-name = "CSI_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
 	};
 
-	usbphy {
-		usbphy2: usbphy@2 {
-			compatible = "usb-nop-xceiv";
-			reg = <2>;
-			vcc-supply = <&reg_5v0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+	usbphy2: usbphy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_5v0>;
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
index 3d10273177e9..e958d7286ae9 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
@@ -15,41 +15,27 @@
 		reg = <0xa0000000 0x08000000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
+	reg_3v3: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
-		reg_5v0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "5V0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	reg_5v0: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 	};
 
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			vcc-supply = <&sw3_reg>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+
+	usbphy0: usbphy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&sw3_reg>;
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
@@ -57,12 +43,12 @@
 	status = "okay";
 
 	/* SSI0 <=> PINS_4 (MC13783 Audio) */
-	ssi0 {
+	mux-ssi0 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <0xcb205000>;
 	};
 
-	pins4 {
+	mux-pins4 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <0x00001000>;
 	};
@@ -188,13 +174,13 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	at24@52 {
+	eeprom@52 {
 		compatible = "atmel,24c32";
 		pagesize = <32>;
 		reg = <0x52>;
 	};
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
@@ -322,7 +308,7 @@
 &weim {
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
diff --git a/arch/arm/boot/dts/imx27-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx27-pinfunc.h
index 75aea0c701d4..75aea0c701d4 100644
--- a/arch/arm/boot/dts/imx27-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx27-pinfunc.h
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27.dtsi
index e140307be2e7..989b7659b669 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27.dtsi
@@ -81,14 +81,14 @@
 		interrupt-parent = <&aitc>;
 		ranges;
 
-		aipi1: aipi@10000000 { /* AIPI1 */
+		aipi1: bus@10000000 { /* AIPI1 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x10000000 0x20000>;
 			ranges;
 
-			dma: dma@10001000 {
+			dma: dma-controller@10001000 {
 				compatible = "fsl,imx27-dma";
 				reg = <0x10001000 0x1000>;
 				interrupts = <32>;
@@ -453,7 +453,7 @@
 			};
 		};
 
-		aipi2: aipi@10020000 { /* AIPI2 */
+		aipi2: bus@10020000 { /* AIPI2 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -534,7 +534,7 @@
 				clock-names = "ipg", "ahb";
 			};
 
-			clks: ccm@10027000{
+			clks: ccm@10027000 {
 				compatible = "fsl,imx27-ccm";
 				reg = <0x10027000 0x1000>;
 				#clock-cells = <1>;
@@ -568,7 +568,7 @@
 			status = "disabled";
 		};
 
-		weim: weim@d8002000 {
+		weim: memory-controller@d8002000 {
 			#address-cells = <2>;
 			#size-cells = <1>;
 			compatible = "fsl,imx27-weim";
@@ -588,6 +588,9 @@
 		iram: sram@ffff4c00 {
 			compatible = "mmio-sram";
 			reg = <0xffff4c00 0xb400>;
+			ranges = <0 0xffff4c00 0xb400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/nxp/imx/imx31-bug.dts
index d87eee3f9b3c..d87eee3f9b3c 100644
--- a/arch/arm/boot/dts/imx31-bug.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx31-bug.dts
diff --git a/arch/arm/boot/dts/imx31-lite.dts b/arch/arm/boot/dts/nxp/imx/imx31-lite.dts
index d17abdfb6330..630f8fa69ba8 100644
--- a/arch/arm/boot/dts/imx31-lite.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx31-lite.dts
@@ -157,7 +157,7 @@
 &weim {
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x0 0x200000>;
 		bank-width = <2>;
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/nxp/imx/imx31.dtsi
index 5c4938b0d5a1..8541a666747a 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx31.dtsi
@@ -218,7 +218,7 @@
 			};
 
 			iim: efuse@5001c000 {
-				compatible = "fsl,imx31-iim", "fsl,imx27-iim";
+				compatible = "fsl,imx31-iim";
 				reg = <0x5001c000 0x1000>;
 				interrupts = <19>;
 				clocks = <&clks 25>;
@@ -232,7 +232,7 @@
 			reg = <0x53f00000 0x100000>;
 			ranges;
 
-			clks: ccm@53f80000{
+			clks: ccm@53f80000 {
 				compatible = "fsl,imx31-ccm";
 				reg = <0x53f80000 0x4000>;
 				interrupts = <31>, <53>;
@@ -297,7 +297,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			sdma: sdma@53fd4000 {
+			sdma: dma-controller@53fd4000 {
 				compatible = "fsl,imx31-sdma";
 				reg = <0x53fd4000 0x4000>;
 				interrupts = <34>;
@@ -340,7 +340,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			nfc: nand@b8000000 {
+			nfc: nand-controller@b8000000 {
 				compatible = "fsl,imx31-nand", "fsl,imx27-nand";
 				reg = <0xb8000000 0x1000>;
 				interrupts = <33>;
@@ -352,7 +352,7 @@
 				status = "disabled";
 			};
 
-			weim: weim@b8002000 {
+			weim: memory-controller@b8002000 {
 				compatible = "fsl,imx31-weim", "fsl,imx27-weim";
 				reg = <0xb8002000 0x1000>;
 				clocks = <&clks 56>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi
new file mode 100644
index 000000000000..0064b5452b54
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include "imx35.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX35";
+	compatible = "eukrea,cpuimx35", "fsl,imx35";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>; /* 128M */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tsc2007: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		gpios = <&gpio3 2 0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0x2 0x8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007_1>;
+		reg = <0x48>;
+		ti,x-plate-ohms = <180>;
+	};
+};
+
+&iomuxc {
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX35_PAD_FEC_TX_CLK__FEC_TX_CLK		0x80000000
+			MX35_PAD_FEC_RX_CLK__FEC_RX_CLK		0x80000000
+			MX35_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
+			MX35_PAD_FEC_COL__FEC_COL		0x80000000
+			MX35_PAD_FEC_RDATA0__FEC_RDATA_0	0x80000000
+			MX35_PAD_FEC_TDATA0__FEC_TDATA_0	0x80000000
+			MX35_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+			MX35_PAD_FEC_MDC__FEC_MDC		0x80000000
+			MX35_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+			MX35_PAD_FEC_TX_ERR__FEC_TX_ERR		0x80000000
+			MX35_PAD_FEC_RX_ERR__FEC_RX_ERR		0x80000000
+			MX35_PAD_FEC_CRS__FEC_CRS		0x80000000
+			MX35_PAD_FEC_RDATA1__FEC_RDATA_1	0x80000000
+			MX35_PAD_FEC_TDATA1__FEC_TDATA_1	0x80000000
+			MX35_PAD_FEC_RDATA2__FEC_RDATA_2	0x80000000
+			MX35_PAD_FEC_TDATA2__FEC_TDATA_2	0x80000000
+			MX35_PAD_FEC_RDATA3__FEC_RDATA_3	0x80000000
+			MX35_PAD_FEC_TDATA3__FEC_TDATA_3	0x80000000
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX35_PAD_I2C1_CLK__I2C1_SCL		0x80000000
+			MX35_PAD_I2C1_DAT__I2C1_SDA		0x80000000
+		>;
+	};
+
+	pinctrl_tsc2007_1: tsc2007-1-grp {
+		fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>;
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-mbimxsd35-baseboard.dts
new file mode 100644
index 000000000000..e7835a769bbc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx35-eukrea-cpuimx35.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX35";
+	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bp1>;
+
+		button {
+			label = "BP1";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+			linux,input-type = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led1>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx35-eukrea-tlv320aic23";
+		ssi-controller = <&ssi1>;
+		fsl,mux-int-port = <1>;
+		fsl,mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS	0x80000000
+			MX35_PAD_STXD4__AUDMUX_AUD4_TXD		0x80000000
+			MX35_PAD_SRXD4__AUDMUX_AUD4_RXD		0x80000000
+			MX35_PAD_SCK4__AUDMUX_AUD4_TXC		0x80000000
+		>;
+	};
+
+	pinctrl_bp1: bp1grp {
+		fsl,pins = <MX35_PAD_LD19__GPIO3_25  0x80000000>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+			MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+			MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+			MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+			MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+			MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
+			MX35_PAD_LD18__GPIO3_24			0x80000000 /* CD */
+		>;
+	};
+
+	pinctrl_led1: led1grp {
+		fsl,pins = <MX35_PAD_LD23__GPIO3_29  0x80000000>;
+	};
+
+	pinctrl_reg_lcd_3v3: reg-lcd-3v3grp {
+		fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
+			MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
+			MX35_PAD_CTS1__UART1_CTS		0x1c5
+			MX35_PAD_RTS1__UART1_RTS		0x1c5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX35_PAD_RXD2__UART2_RXD_MUX		0x1c5
+			MX35_PAD_TXD2__UART2_TXD_MUX		0x1c5
+			MX35_PAD_RTS2__UART2_RTS		0x1c5
+			MX35_PAD_CTS2__UART2_CTS		0x1c5
+		>;
+	};
+};
+
+&ssi1 {
+	codec-handle = <&tlv320aic23>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbhost1 {
+	phy_type = "serial";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "otg";
+	external-vbus-divider;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx35-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx35-pdk.dts
new file mode 100644
index 000000000000..a2baf8202f94
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx35-pdk.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+// Copyright 2014 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+#include "imx35.dtsi"
+
+/ {
+	model = "Freescale i.MX35 Product Development Kit";
+	compatible = "fsl,imx35-pdk", "fsl,imx35";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>,
+		      <0x90000000 0x8000000>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+			MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+			MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+			MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+			MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+			MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
+			MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
+			MX35_PAD_CTS1__UART1_CTS		0x1c5
+			MX35_PAD_RTS1__UART1_RTS		0x1c5
+		>;
+	};
+};
+
+&nfc {
+	nand-bus-width = <16>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx35-pinfunc.h
index 9d6cc9564b72..9d6cc9564b72 100644
--- a/arch/arm/boot/dts/imx35-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx35-pinfunc.h
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35.dtsi
index 8e41c8b7bd70..111d7c0331f5 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx35.dtsi
@@ -156,7 +156,7 @@
 				status = "disabled";
 			};
 
-			iomuxc: iomuxc@43fac000 {
+			iomuxc: pinctrl@43fac000 {
 				compatible = "fsl,imx35-iomuxc";
 				reg = <0x43fac000 0x4000>;
 			};
@@ -284,7 +284,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			sdma: sdma@53fd4000 {
+			sdma: dma-controller@53fd4000 {
 				compatible = "fsl,imx35-sdma";
 				reg = <0x53fd4000 0x4000>;
 				clocks = <&clks 9>, <&clks 65>;
@@ -298,7 +298,6 @@
 				compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
 				reg = <0x53fdc000 0x4000>;
 				clocks = <&clks 74>;
-				clock-names = "";
 				interrupts = <55>;
 			};
 
@@ -364,7 +363,7 @@
 			reg = <0x80000000 0x40000000>;
 			ranges;
 
-			nfc: nand@bb000000 {
+			nfc: nand-controller@bb000000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx35-nand", "fsl,imx25-nand";
@@ -375,7 +374,7 @@
 				status = "disabled";
 			};
 
-			weim: weim@b8002000 {
+			weim: memory-controller@b8002000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clocks = <&clks 0>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx50-evk.dts b/arch/arm/boot/dts/nxp/imx/imx50-evk.dts
new file mode 100644
index 000000000000..f40b0d5fdb85
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx50-evk.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+#include "imx50.dtsi"
+
+/ {
+	model = "Freescale i.MX50 Evaluation Kit";
+	compatible = "fsl,imx50-evk", "fsl,imx50";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x80000000>;
+	};
+};
+
+&cspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi>;
+	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash: flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p32", "jedec,spi-nor";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0 0x100000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "kernel";
+			reg = <0x100000 0x300000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_cspi: cspigrp {
+		fsl,pins = <
+			MX50_PAD_CSPI_SCLK__CSPI_SCLK		0x00
+			MX50_PAD_CSPI_MISO__CSPI_MISO		0x00
+			MX50_PAD_CSPI_MOSI__CSPI_MOSI		0x00
+			MX50_PAD_CSPI_SS0__GPIO4_11		0xc4
+			MX50_PAD_ECSPI1_MOSI__GPIO4_13		0x84
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX50_PAD_SSI_RXFS__FEC_MDC		0x80
+			MX50_PAD_SSI_RXC__FEC_MDIO		0x80
+			MX50_PAD_DISP_D0__FEC_TX_CLK		0x80
+			MX50_PAD_DISP_D1__FEC_RX_ERR		0x80
+			MX50_PAD_DISP_D2__FEC_RX_DV		0x80
+			MX50_PAD_DISP_D3__FEC_RDATA_1		0x80
+			MX50_PAD_DISP_D4__FEC_RDATA_0		0x80
+			MX50_PAD_DISP_D5__FEC_TX_EN		0x80
+			MX50_PAD_DISP_D6__FEC_TDATA_1		0x80
+			MX50_PAD_DISP_D7__FEC_TDATA_0		0x80
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX50_PAD_UART1_TXD__UART1_TXD_MUX	0x1e4
+			MX50_PAD_UART1_RXD__UART1_RXD_MUX	0x1e4
+			MX50_PAD_UART1_RTS__UART1_RTS		0x1e4
+			MX50_PAD_UART1_CTS__UART1_CTS		0x1e4
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/nxp/imx/imx50-kobo-aura.dts
index 82ce8c43be86..b1a6a9c58ac3 100644
--- a/arch/arm/boot/dts/imx50-kobo-aura.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx50-kobo-aura.dts
@@ -26,7 +26,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_leds>;
 
-		on {
+		led-on {
 			label = "kobo_aura:orange:on";
 			gpios = <&gpio6 24 GPIO_ACTIVE_LOW>;
 			panic-indicator;
@@ -38,20 +38,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 		};
 
-		hallsensor {
+		event-hallsensor {
 			label = "Hallsensor";
 			gpios = <&gpio5 15 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESERVED>;
 			linux,input-type = <EV_SW>;
 		};
 
-		frontlight {
+		event-frontlight {
 			label = "Frontlight";
 			gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_DISPLAYTOGGLE>;
@@ -73,7 +73,7 @@
 		states = <3300000 0>;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		enable-gpio = <&gpio4 12 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
 		startup-delay-us = <100000>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx50-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx50-pinfunc.h
index 5e6b30247543..5e6b30247543 100644
--- a/arch/arm/boot/dts/imx50-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx50-pinfunc.h
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/nxp/imx/imx50.dtsi
index c0c7575fbecf..d76c496b3f71 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx50.dtsi
@@ -283,7 +283,7 @@
 				clock-names = "ipg", "per";
 			};
 
-			iomuxc: iomuxc@53fa8000 {
+			iomuxc: pinctrl@53fa8000 {
 				compatible = "fsl,imx50-iomuxc", "fsl,imx53-iomuxc";
 				reg = <0x53fa8000 0x4000>;
 			};
@@ -335,10 +335,10 @@
 				#reset-cells = <1>;
 			};
 
-			clks: ccm@53fd4000{
+			clks: ccm@53fd4000 {
 				compatible = "fsl,imx50-ccm";
 				reg = <0x53fd4000 0x4000>;
-				interrupts = <0 71 0x04 0 72 0x04>;
+				interrupts = <71>, <72>;
 				#clock-cells = <1>;
 			};
 
@@ -421,7 +421,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@63fb0000 {
+			sdma: dma-controller@63fb0000 {
 				compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-apf51.dts b/arch/arm/boot/dts/nxp/imx/imx51-apf51.dts
new file mode 100644
index 000000000000..670e13136f1f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-apf51.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ * Copyright 2012 Laurent Cans <laurent.cans@gmail.com>
+ *
+ * Based on mx51-babbage.dts
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Armadeus Systems APF51 module";
+	compatible = "armadeus,imx51-apf51", "fsl,imx51";
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x20000000>;
+	};
+
+	clocks {
+		osc {
+			clock-frequency = <33554432>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
+			MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
+			MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
+			MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
+			MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
+			MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
+			MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+			MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+		>;
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts b/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts
new file mode 100644
index 000000000000..6ebd80e30683
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Armadeus Systems - <support@armadeus.com>
+ */
+
+/* APF51Dev is a docking board for the APF51 SOM */
+#include "imx51-apf51.dts"
+
+/ {
+	model = "Armadeus Systems APF51Dev docking/development board";
+	compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
+
+	backlight {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		compatible = "gpio-backlight";
+		gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	disp1 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing-lw700 {
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+
+		port {
+			display_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp1>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-key {
+			label = "user";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			linux,code = <256>; /* BTN_0 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user {
+			label = "Heartbeat";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>,
+		   <&gpio3 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX51_PAD_EIM_EB2__GPIO2_22   0x0C5
+			MX51_PAD_EIM_EB3__GPIO2_23   0x0C5
+			MX51_PAD_EIM_CS4__GPIO2_29   0x100
+			MX51_PAD_NANDF_D13__GPIO3_27 0x0C5
+			MX51_PAD_NANDF_D12__GPIO3_28 0x0C5
+			MX51_PAD_CSPI1_SS0__GPIO4_24 0x0C5
+			MX51_PAD_CSPI1_SS1__GPIO4_25 0x0C5
+			MX51_PAD_GPIO1_2__GPIO1_2    0x0C5
+			MX51_PAD_GPIO1_3__GPIO1_3    0x0C5
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX51_PAD_NANDF_RB3__ECSPI2_MISO		0x185
+			MX51_PAD_NANDF_D15__ECSPI2_MOSI		0x185
+			MX51_PAD_NANDF_RB2__ECSPI2_SCLK		0x185
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+		>;
+	};
+
+	pinctrl_esdhc2: esdhc2grp {
+		fsl,pins = <
+			MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
+			MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
+			MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
+			MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
+			MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
+			MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_EIM_D27__I2C2_SCL		0x400001ed
+			MX51_PAD_EIM_D24__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_ipu_disp1: ipudisp1grp {
+		fsl,pins = <
+			MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+			MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+			MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+			MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+			MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+			MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+			MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+			MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+			MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+			MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+			MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+			MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+			MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+			MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+			MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+			MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+			MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+			MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+			MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+			MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+			MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+			MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+			MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+			MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+			MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+			MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+		>;
+	};
+};
+
+&ipu_di0_disp1 {
+	remote-endpoint = <&display_in>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts b/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts
new file mode 100644
index 000000000000..1b6ec55f9068
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts
@@ -0,0 +1,717 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Freescale i.MX51 Babbage Board";
+	compatible = "fsl,imx51-babbage", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x20000000>;
+	};
+
+	ckih1 {
+		clock-frequency = <22579200>;
+	};
+
+	clk_osc: clk-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_osc_gate: clk-osc-gate {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz_osc>;
+		clocks = <&clk_osc>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	clk_audio: clk-audio {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz_audio>;
+		clocks = <&clk_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	};
+
+	clk_usb: clk-usb {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz_usb>;
+		clocks = <&clk_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	};
+
+	display1: disp1 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+		port@0 {
+		reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			parallel_display_out: endpoint {
+				remote-endpoint = <&tfp410_in>;
+			};
+		};
+	};
+
+	display2: disp2 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb565";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp2>;
+		status = "disabled";
+		display-timings {
+			native-mode = <&timing1>;
+			timing1: timing-claawvga {
+				clock-frequency = <27000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <60>;
+				vback-porch = <10>;
+				vfront-porch = <10>;
+				hsync-len = <20>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp2>;
+			};
+		};
+	};
+
+	dvi-connector {
+		compatible = "dvi-connector";
+		digital;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	dvi-encoder {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&parallel_display_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-diagnostic {
+			label = "diagnostic";
+			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_hub_reset: regulator-hub-reset {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgreg>;
+		regulator-name = "hub_reset";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx51-babbage-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx51-babbage-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+	};
+
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1reg>;
+		clocks = <&clk_usb>;
+		clock-names = "main_clk";
+		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vusb_reg>;
+		#phy-cells = <0>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic: mc13892@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+		fsl,mc13xxx-uses-rtc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+			};
+
+			vusb_reg: vusb {
+				regulator-boot-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	flash: at45db321d@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0x3c0000>;
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_audio>;
+		VDDA-supply = <&vdig_reg>;
+		VDDIO-supply = <&vvideo_reg>;
+	};
+};
+
+&ipu_di0_disp1 {
+	remote-endpoint = <&display0_in>;
+};
+
+&ipu_di1_disp2 {
+	remote-endpoint = <&display1_in>;
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_UP)
+		MATRIX_KEY(0, 1, KEY_DOWN)
+		MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0, 3, KEY_HOME)
+		MATRIX_KEY(1, 0, KEY_RIGHT)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+		MATRIX_KEY(1, 2, KEY_ENTER)
+		MATRIX_KEY(1, 3, KEY_VOLUMEUP)
+		MATRIX_KEY(2, 0, KEY_F6)
+		MATRIX_KEY(2, 1, KEY_F8)
+		MATRIX_KEY(2, 2, KEY_F9)
+		MATRIX_KEY(2, 3, KEY_F10)
+		MATRIX_KEY(3, 0, KEY_F1)
+		MATRIX_KEY(3, 1, KEY_F2)
+		MATRIX_KEY(3, 2, KEY_F3)
+		MATRIX_KEY(3, 3, KEY_POWER)
+	>;
+	status = "okay";
+};
+
+&pmu {
+	secure-reg-access;
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_hub_reset>;
+	fsl,usbphy = <&usbphy1>;
+	phy_type = "ulpi";
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb_reg>;
+};
+
+&usbotg {
+	dr_mode = "otg";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
+			MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
+			MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
+			MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
+		>;
+	};
+
+	pinctrl_clk26mhz_audio: clk26mhzaudiocgrp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_RDY__GPIO4_26		0x85
+		>;
+	};
+
+	pinctrl_clk26mhz_osc: clk26mhzoscgrp {
+		fsl,pins = <
+			MX51_PAD_DI1_PIN12__GPIO3_1		0x85
+		>;
+	};
+
+	pinctrl_clk26mhz_usb: clk26mhzusbgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_D17__GPIO2_1		0x85
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
+			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85 /* CS1 */
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			MX51_PAD_GPIO1_0__GPIO1_0		0x100
+			MX51_PAD_GPIO1_1__GPIO1_1		0x100
+		>;
+	};
+
+	pinctrl_esdhc2: esdhc2grp {
+		fsl,pins = <
+			MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
+			MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
+			MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
+			MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
+			MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
+			MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
+			MX51_PAD_GPIO1_5__GPIO1_5		0x100 /* WP */
+			MX51_PAD_GPIO1_6__GPIO1_6		0x100 /* CD */
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
+			MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
+			MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
+			MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
+			MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
+			MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
+			MX51_PAD_NANDF_RB2__FEC_COL		0x00000180
+			MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x00000180
+			MX51_PAD_NANDF_D9__FEC_RDATA0		0x00002180
+			MX51_PAD_NANDF_D8__FEC_TDATA0		0x00002004
+			MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
+			MX51_PAD_NANDF_CS3__FEC_MDC		0x00002004
+			MX51_PAD_NANDF_CS4__FEC_TDATA1		0x00002004
+			MX51_PAD_NANDF_CS5__FEC_TDATA2		0x00002004
+			MX51_PAD_NANDF_CS6__FEC_TDATA3		0x00002004
+			MX51_PAD_NANDF_CS7__FEC_TX_EN		0x00002004
+			MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	0x00002180
+			MX51_PAD_NANDF_D11__FEC_RX_DV		0x000020a4
+			MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_A27__GPIO2_21		0x5
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_D22__GPIO2_6		0x80000000
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX51_PAD_EIM_D19__I2C1_SCL		0x400001ed
+			MX51_PAD_EIM_D16__I2C1_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_ipu_disp1: ipudisp1grp {
+		fsl,pins = <
+			MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+			MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+			MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+			MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+			MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+			MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+			MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+			MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+			MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+			MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+			MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+			MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+			MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+			MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+			MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+			MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+			MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+			MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+			MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+			MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+			MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+			MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+			MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+			MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+			MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+			MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+		>;
+	};
+
+	pinctrl_ipu_disp2: ipudisp2grp {
+		fsl,pins = <
+			MX51_PAD_DISP2_DAT0__DISP2_DAT0		0x5
+			MX51_PAD_DISP2_DAT1__DISP2_DAT1		0x5
+			MX51_PAD_DISP2_DAT2__DISP2_DAT2		0x5
+			MX51_PAD_DISP2_DAT3__DISP2_DAT3		0x5
+			MX51_PAD_DISP2_DAT4__DISP2_DAT4		0x5
+			MX51_PAD_DISP2_DAT5__DISP2_DAT5		0x5
+			MX51_PAD_DISP2_DAT6__DISP2_DAT6		0x5
+			MX51_PAD_DISP2_DAT7__DISP2_DAT7		0x5
+			MX51_PAD_DISP2_DAT8__DISP2_DAT8		0x5
+			MX51_PAD_DISP2_DAT9__DISP2_DAT9		0x5
+			MX51_PAD_DISP2_DAT10__DISP2_DAT10	0x5
+			MX51_PAD_DISP2_DAT11__DISP2_DAT11	0x5
+			MX51_PAD_DISP2_DAT12__DISP2_DAT12	0x5
+			MX51_PAD_DISP2_DAT13__DISP2_DAT13	0x5
+			MX51_PAD_DISP2_DAT14__DISP2_DAT14	0x5
+			MX51_PAD_DISP2_DAT15__DISP2_DAT15	0x5
+			MX51_PAD_DI2_PIN2__DI2_PIN2		0x5
+			MX51_PAD_DI2_PIN3__DI2_PIN3		0x5
+			MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
+			MX51_PAD_DI_GP4__DI2_PIN15		0x5
+		>;
+	};
+
+	pinctrl_kpp: kppgrp {
+		fsl,pins = <
+			MX51_PAD_KEY_ROW0__KEY_ROW0		0xe0
+			MX51_PAD_KEY_ROW1__KEY_ROW1		0xe0
+			MX51_PAD_KEY_ROW2__KEY_ROW2		0xe0
+			MX51_PAD_KEY_ROW3__KEY_ROW3		0xe0
+			MX51_PAD_KEY_COL0__KEY_COL0		0xe8
+			MX51_PAD_KEY_COL1__KEY_COL1		0xe8
+			MX51_PAD_KEY_COL2__KEY_COL2		0xe8
+			MX51_PAD_KEY_COL3__KEY_COL3		0xe8
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_8__GPIO1_8		0xe5 /* IRQ */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
+			MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+			MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_EIM_D25__UART3_RXD		0x1c5
+			MX51_PAD_EIM_D26__UART3_TXD		0x1c5
+			MX51_PAD_EIM_D27__UART3_RTS		0x1c5
+			MX51_PAD_EIM_D24__UART3_CTS		0x1c5
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX51_PAD_USBH1_CLK__USBH1_CLK		0x80000000
+			MX51_PAD_USBH1_DIR__USBH1_DIR		0x80000000
+			MX51_PAD_USBH1_NXT__USBH1_NXT		0x80000000
+			MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x80000000
+			MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x80000000
+			MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x80000000
+			MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x80000000
+			MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x80000000
+			MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x80000000
+			MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x80000000
+			MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x80000000
+		>;
+	};
+
+	pinctrl_usbh1reg: usbh1reggrp {
+		fsl,pins = <
+			MX51_PAD_EIM_D21__GPIO2_5		0x85
+		>;
+	};
+
+	pinctrl_usbotgreg: usbotgreggrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_7__GPIO1_7		0x85
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-jsk.dts
new file mode 100644
index 000000000000..9750b5f93330
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-jsk.dts
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#include "imx51-digi-connectcore-som.dtsi"
+
+/ {
+	model = "Digi ConnectCore CC(W)-MX51 JSK";
+	compatible = "digi,connectcore-ccxmx51-jsk",
+		     "digi,connectcore-ccxmx51-som", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire>;
+	status = "okay";
+};
+
+&pmic {
+	fsl,mc13xxx-uses-rtc;
+
+	regulators {
+		vcoincell_reg: vcoincell {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	fsl,usbphy = <&usbphy1>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_owire: owiregrp {
+		fsl,pins = <
+			MX51_PAD_OWIRE_LINE__OWIRE_LINE		0x40000000
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+			MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+			MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x1e5
+			MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x1e5
+			MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x1e5
+			MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x1e5
+			MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x1e5
+			MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x1e5
+			MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x1e5
+			MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x1e5
+			MX51_PAD_USBH1_CLK__USBH1_CLK		0x1e5
+			MX51_PAD_USBH1_DIR__USBH1_DIR		0x1e5
+			MX51_PAD_USBH1_NXT__USBH1_NXT		0x1e5
+			MX51_PAD_USBH1_STP__USBH1_STP		0x1e5
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi
new file mode 100644
index 000000000000..1980f751f161
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Digi ConnectCore CC(W)-MX51";
+	compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51";
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x08000000>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: mc13892@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mc13892>;
+		compatible = "fsl,mc13892";
+		spi-max-frequency = <16000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1275000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst { };
+
+			viohi_reg: viohi {
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <3150000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <2600000>;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2750000>;
+				regulator-max-microvolt = <2750000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			gpo2_reg: gpo2 { };
+
+			gpo3_reg: gpo3 { };
+
+			gpo4_reg: gpo4 { };
+
+			pwgt2spi_reg: pwgt2spi {
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	max-frequency = <50000000>;
+	bus-width = <1>;
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cap-sdio-irq;
+	wakeup-source;
+	keep-power-in-suspend;
+	max-frequency = <50000000>;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&gpo4_reg>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-supply = <&gpo3_reg>;
+	/* Pins shared with LCD2, keep status disabled */
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	mma7455l@1d {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mma7455l>;
+		compatible = "fsl,mma7455";
+		reg = <0x1d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi_wide";
+	disable-over-current;
+	vbus-supply = <&swbst_reg>;
+	/* Device role is not known, keep status disabled */
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+	status = "okay";
+
+	lan9221: ethernet@5,0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lan9221>;
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		reg = <5 0x00000000 0x1000>;
+		fsl,weim-cs-timing = <
+			0x00420081 0x00000000
+			0x32260000 0x00000000
+			0x72080f00 0x00000000
+		>;
+		clocks = <&clks IMX5_CLK_DUMMY>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		phy-mode = "mii";
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&gpo2_reg>;
+		vddvario-supply = <&gpo2_reg>;
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CLK__SD1_CLK		0x400021d5
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x400020d5
+		>;
+	};
+
+	pinctrl_esdhc2: esdhc2grp {
+		fsl,pins = <
+			MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
+			MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
+			MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
+			MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
+			MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
+			MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
+			MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
+			MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
+			MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
+			MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
+			MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
+			MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_2__I2C2_SCL		0x400001ed
+			MX51_PAD_GPIO1_3__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_2__GPIO1_2		0x400001ed
+			MX51_PAD_GPIO1_3__GPIO1_3		0x400001ed
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			MX51_PAD_NANDF_D0__NANDF_D0		0x80000000
+			MX51_PAD_NANDF_D1__NANDF_D1		0x80000000
+			MX51_PAD_NANDF_D2__NANDF_D2		0x80000000
+			MX51_PAD_NANDF_D3__NANDF_D3		0x80000000
+			MX51_PAD_NANDF_D4__NANDF_D4		0x80000000
+			MX51_PAD_NANDF_D5__NANDF_D5		0x80000000
+			MX51_PAD_NANDF_D6__NANDF_D6		0x80000000
+			MX51_PAD_NANDF_D7__NANDF_D7		0x80000000
+			MX51_PAD_NANDF_ALE__NANDF_ALE		0x80000000
+			MX51_PAD_NANDF_CLE__NANDF_CLE		0x80000000
+			MX51_PAD_NANDF_RE_B__NANDF_RE_B		0x80000000
+			MX51_PAD_NANDF_WE_B__NANDF_WE_B		0x80000000
+			MX51_PAD_NANDF_WP_B__NANDF_WP_B		0x80000000
+			MX51_PAD_NANDF_CS0__NANDF_CS0		0x80000000
+			MX51_PAD_NANDF_RB0__NANDF_RB0		0x80000000
+		>;
+	};
+
+	pinctrl_lan9221: lan9221grp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_9__GPIO1_9		0xe5 /* IRQ */
+		>;
+	};
+
+	pinctrl_mc13892: mc13892grp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_5__GPIO1_5		0xe5 /* IRQ */
+		>;
+	};
+
+	pinctrl_mma7455l: mma7455lgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_7__GPIO1_7		0xe5 /* IRQ1 */
+			MX51_PAD_GPIO1_6__GPIO1_6		0xe5 /* IRQ2 */
+		>;
+	};
+
+	pinctrl_weim: weimgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_DA0__EIM_DA0		0x80000000
+			MX51_PAD_EIM_DA1__EIM_DA1		0x80000000
+			MX51_PAD_EIM_DA2__EIM_DA2		0x80000000
+			MX51_PAD_EIM_DA3__EIM_DA3		0x80000000
+			MX51_PAD_EIM_DA4__EIM_DA4		0x80000000
+			MX51_PAD_EIM_DA5__EIM_DA5		0x80000000
+			MX51_PAD_EIM_DA6__EIM_DA6		0x80000000
+			MX51_PAD_EIM_DA7__EIM_DA7		0x80000000
+			MX51_PAD_EIM_DA8__EIM_DA8		0x80000000
+			MX51_PAD_EIM_DA9__EIM_DA9		0x80000000
+			MX51_PAD_EIM_DA10__EIM_DA10		0x80000000
+			MX51_PAD_EIM_DA11__EIM_DA11		0x80000000
+			MX51_PAD_EIM_DA12__EIM_DA12		0x80000000
+			MX51_PAD_EIM_DA13__EIM_DA13		0x80000000
+			MX51_PAD_EIM_DA14__EIM_DA14		0x80000000
+			MX51_PAD_EIM_DA15__EIM_DA15		0x80000000
+			MX51_PAD_EIM_A16__EIM_A16		0x80000000
+			MX51_PAD_EIM_A17__EIM_A17		0x80000000
+			MX51_PAD_EIM_A18__EIM_A18		0x80000000
+			MX51_PAD_EIM_A19__EIM_A19		0x80000000
+			MX51_PAD_EIM_A20__EIM_A20		0x80000000
+			MX51_PAD_EIM_A21__EIM_A21		0x80000000
+			MX51_PAD_EIM_A22__EIM_A22		0x80000000
+			MX51_PAD_EIM_A23__EIM_A23		0x80000000
+			MX51_PAD_EIM_A24__EIM_A24		0x80000000
+			MX51_PAD_EIM_A25__EIM_A25		0x80000000
+			MX51_PAD_EIM_A26__EIM_A26		0x80000000
+			MX51_PAD_EIM_A27__EIM_A27		0x80000000
+			MX51_PAD_EIM_D16__EIM_D16		0x80000000
+			MX51_PAD_EIM_D17__EIM_D17		0x80000000
+			MX51_PAD_EIM_D18__EIM_D18		0x80000000
+			MX51_PAD_EIM_D19__EIM_D19		0x80000000
+			MX51_PAD_EIM_D20__EIM_D20		0x80000000
+			MX51_PAD_EIM_D21__EIM_D21		0x80000000
+			MX51_PAD_EIM_D22__EIM_D22		0x80000000
+			MX51_PAD_EIM_D23__EIM_D23		0x80000000
+			MX51_PAD_EIM_D24__EIM_D24		0x80000000
+			MX51_PAD_EIM_D25__EIM_D25		0x80000000
+			MX51_PAD_EIM_D26__EIM_D26		0x80000000
+			MX51_PAD_EIM_D27__EIM_D27		0x80000000
+			MX51_PAD_EIM_D28__EIM_D28		0x80000000
+			MX51_PAD_EIM_D29__EIM_D29		0x80000000
+			MX51_PAD_EIM_D30__EIM_D30		0x80000000
+			MX51_PAD_EIM_D31__EIM_D31		0x80000000
+			MX51_PAD_EIM_OE__EIM_OE			0x80000000
+			MX51_PAD_EIM_DTACK__EIM_DTACK		0x80000000
+			MX51_PAD_EIM_LBA__EIM_LBA		0x80000000
+			MX51_PAD_EIM_CS5__EIM_CS5		0x80000000 /* CS5 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi
new file mode 100644
index 000000000000..244740d65b3d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include "imx51.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX51";
+	compatible = "eukrea,cpuimx51", "fsl,imx51";
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x10000000>; /* 256M */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tsc2007: tsc2007@49 {
+		compatible = "ti,tsc2007";
+		gpios = <&gpio4 0 1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <0x0 0x8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007_1>;
+		reg = <0x49>;
+		ti,x-plate-ohms = <180>;
+	};
+};
+
+&iomuxc {
+	pinctrl_tsc2007_1: tsc2007-1-grp {
+		fsl,pins = <
+			MX51_PAD_GPIO_NAND__GPIO_NAND 0x1f5
+			MX51_PAD_NANDF_D8__GPIO4_0 0x1f5
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
+			MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
+			MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
+			MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
+			MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
+			MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
+			MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX51_PAD_SD2_CMD__I2C1_SCL		0x400001ed
+			MX51_PAD_SD2_CLK__I2C1_SDA		0x400001ed
+		>;
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-mbimxsd51-baseboard.dts
new file mode 100644
index 000000000000..0e0b9a811b96
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+/dts-v1/;
+#include "imx51-eukrea-cpuimx51.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Eukrea CPUIMX51";
+	compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
+
+	clocks {
+		clk24M: can_clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys_1>;
+
+		button-1 {
+			label = "BP1";
+			gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			linux,code = <256>;
+			wakeup-source;
+			linux,input-type = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_can: regulator-can {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN_RST";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx51-eukrea-tlv320aic23";
+		ssi-controller = <&ssi2>;
+		fsl,mux-int-port = <2>;
+		fsl,mux-ext-port = <3>;
+	};
+
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+		#phy-cells = <0>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	can0: can@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can>;
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		clocks = <&clk24M>;
+		spi-max-frequency = <10000000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&reg_can>;
+	};
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
+			MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
+			MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
+			MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
+		>;
+	};
+
+
+	pinctrl_can: cangrp {
+		fsl,pins = <
+			MX51_PAD_CSI2_PIXCLK__GPIO4_15		0x80000000	/* nReset */
+			MX51_PAD_GPIO1_1__GPIO1_1		0x80000000	/* IRQ */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x80000000 	/* CS0 */
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+			MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart3_rtscts: uart3rtsctsgrp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__UART3_RTS		0x1c5
+			MX51_PAD_KEY_COL5__UART3_CTS		0x1c5
+		>;
+	};
+
+	pinctrl_backlight_1: backlight1grp {
+		fsl,pins = <
+			MX51_PAD_DI1_D1_CS__GPIO3_4 0x1f5
+		>;
+	};
+
+	pinctrl_esdhc1_cd: esdhc1_cdgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_0__GPIO1_0 0xd5
+		>;
+	};
+
+	pinctrl_gpiokeys_1: gpiokeys1grp {
+		fsl,pins = <
+			MX51_PAD_NANDF_D9__GPIO3_31 0x1f5
+		>;
+	};
+
+	pinctrl_gpioled: gpioled1grp {
+		fsl,pins = <
+			MX51_PAD_NANDF_D10__GPIO3_30 0x80000000
+		>;
+	};
+
+	pinctrl_reg_lcd_3v3: reg_lcd_3v3grp {
+		fsl,pins = <
+			MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX51_PAD_USBH1_CLK__USBH1_CLK     0x1e5
+			MX51_PAD_USBH1_DIR__USBH1_DIR     0x1e5
+			MX51_PAD_USBH1_NXT__USBH1_NXT     0x1e5
+			MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
+			MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
+			MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
+			MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
+			MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
+			MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
+			MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
+			MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
+			MX51_PAD_USBH1_STP__USBH1_STP     0x1e5
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1-vbusgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_CS3__GPIO2_28 0x1f5
+		>;
+	};
+};
+
+&ssi2 {
+	codec-handle = <&tlv320aic23>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	fsl,usbphy = <&usbphy1>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "otg";
+	phy_type = "utmi_wide";
+	status = "okay";
+};
+
+&usbphy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1_vbus>;
+	reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/imx51-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx51-pinfunc.h
index 910e0ec50ef3..910e0ec50ef3 100644
--- a/arch/arm/boot/dts/imx51-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx51-pinfunc.h
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts
index f7408722d68a..079bd3d14999 100644
--- a/arch/arm/boot/dts/imx51-ts4800.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts
@@ -45,7 +45,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 78770>;
+		pwms = <&pwm1 0 78770 0>;
 		brightness-levels = <0 150 200 255>;
 		default-brightness-level = <1>;
 		power-supply = <&backlight_reg>;
@@ -58,8 +58,8 @@
 		pinctrl-0 = <&pinctrl_lcd>;
 
 		display-timings {
-			800x480p60 {
-				native-mode;
+			native-mode = <&timing0>;
+			timing0: timing-800x480p60 {
 				clock-frequency = <30066000>;
 				hactive = <800>;
 				vactive = <480>;
@@ -113,7 +113,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm_backlight>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts
index ec8ca3ac2c1c..06545a6052f7 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts
@@ -119,8 +119,8 @@
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_swi2c>;
-		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>, /* sda */
-			<&gpio3 4 GPIO_ACTIVE_HIGH>; /* scl */
+		sda-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,delay-us = <50>;
 		status = "okay";
 
@@ -137,7 +137,7 @@
 		};
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -145,9 +145,9 @@
 		pinctrl-0 = <&pinctrl_gpiospi0>;
 		status = "okay";
 
-		gpio-sck = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio4 12 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio4 11 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 		cs-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
 
@@ -160,7 +160,7 @@
 		};
 	};
 
-	mdio_gpio: mdio-gpio {
+	mdio_gpio: mdio {
 		compatible = "virtual,mdio-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_swmdio>;
@@ -181,7 +181,7 @@
 
 				port@0 {
 					reg = <0>;
-					label = "cpu";
+					phy-mode = "rev-mii";
 					ethernet = <&fec>;
 
 					fixed-link {
@@ -556,7 +556,7 @@
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu1";
 		current-speed = <38400>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts
index aa91e5dde4b8..26eb7a9506e4 100644
--- a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts
@@ -37,7 +37,7 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	mdio_gpio: mdio-gpio {
+	mdio_gpio: mdio {
 		compatible = "virtual,mdio-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_swmdio>;
@@ -82,7 +82,7 @@
 
 				port@4 {
 					reg = <4>;
-					label = "cpu";
+					phy-mode = "rev-mii";
 					ethernet = <&fec>;
 
 					fixed-link {
@@ -311,7 +311,7 @@
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-mezz";
 		current-speed = <57600>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts
index 875b10a7d674..19a3b142c964 100644
--- a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts
@@ -267,7 +267,6 @@
 
 				port@6 {
 					reg = <6>;
-					label = "cpu";
 					phy-mode = "mii";
 					ethernet = <&fec>;
 
@@ -319,7 +318,7 @@
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-esb";
 		current-speed = <57600>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/nxp/imx/imx51.dtsi
index 592d9c23a447..c8698a9af1a7 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx51.dtsi
@@ -124,6 +124,9 @@
 		iram: sram@1ffe0000 {
 			compatible = "mmio-sram";
 			reg = <0x1ffe0000 0x20000>;
+			ranges = <0 0x1ffe0000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		gpu: gpu@30000000 {
@@ -396,7 +399,7 @@
 				clock-names = "ipg", "per";
 			};
 
-			iomuxc: iomuxc@73fa8000 {
+			iomuxc: pinctrl@73fa8000 {
 				compatible = "fsl,imx51-iomuxc";
 				reg = <0x73fa8000 0x4000>;
 			};
@@ -452,10 +455,10 @@
 				#reset-cells = <1>;
 			};
 
-			clks: ccm@73fd4000{
+			clks: ccm@73fd4000 {
 				compatible = "fsl,imx51-ccm";
 				reg = <0x73fd4000 0x4000>;
-				interrupts = <0 71 0x04 0 72 0x04>;
+				interrupts = <71>, <72>;
 				#clock-cells = <1>;
 			};
 		};
@@ -473,7 +476,7 @@
 			};
 
 			iim: efuse@83f98000 {
-				compatible = "fsl,imx51-iim", "fsl,imx27-iim", "syscon";
+				compatible = "fsl,imx51-iim";
 				reg = <0x83f98000 0x4000>;
 				interrupts = <69>;
 				clocks = <&clks IMX5_CLK_IIM_GATE>;
@@ -504,7 +507,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@83fb0000 {
+			sdma: dma-controller@83fb0000 {
 				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
 				reg = <0x83fb0000 0x4000>;
 				interrupts = <6>;
@@ -575,7 +578,7 @@
 				reg = <0x83fd8000 0x1000>;
 			};
 
-			weim: weim@83fda000 {
+			weim: memory-controller@83fda000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				compatible = "fsl,imx51-weim";
@@ -592,7 +595,7 @@
 				status = "disabled";
 			};
 
-			nfc: nand@83fdb000 {
+			nfc: nand-controller@83fdb000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx51-nand";
@@ -648,7 +651,7 @@
 			};
 
 			sahara: crypto@83ff8000 {
-				compatible = "fsl,imx53-sahara", "fsl,imx51-sahara";
+				compatible = "fsl,imx53-sahara";
 				reg = <0x83ff8000 0x4000>;
 				interrupts = <19 20>;
 				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-ard.dts b/arch/arm/boot/dts/nxp/imx/imx53-ard.dts
new file mode 100644
index 000000000000..e580427660b1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-ard.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "imx53.dtsi"
+
+/ {
+	model = "Freescale i.MX53 Automotive Reference Design Board";
+	compatible = "fsl,imx53-ard", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x40000000>;
+	};
+
+	eim-cs1@f4000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,eim-bus", "simple-bus";
+		reg = <0xf4000000 0x3ff0000>;
+		ranges;
+
+		ethernet@f4000000 {
+			compatible = "smsc,lan9220", "smsc,lan9115";
+			reg = <0xf4000000 0x2000000>;
+			phy-mode = "mii";
+			interrupt-parent = <&gpio2>;
+			interrupts = <31 0x8>;
+			reg-io-width = <4>;
+			/*
+			 * VDD33A and VDDVARIO of LAN9220 are supplied by
+			 * SW4_3V3 of LTC3589.  Before the regulator driver
+			 * for this PMIC is available, we use a fixed dummy
+			 * 3V3 regulator to get LAN9220 driver probing work.
+			 */
+			vdd33a-supply = <&reg_3p3v>;
+			vddvario-supply = <&reg_3p3v>;
+			smsc,irq-push-pull;
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-home {
+			label = "Home";
+			gpios = <&gpio5 10 0>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		key-back {
+			label = "Back";
+			gpios = <&gpio5 11 0>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+
+		key-program {
+			label = "Program";
+			gpios = <&gpio5 12 0>;
+			linux,code = <KEY_PROGRAM >;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio5 13 0>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio4 0 0>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_1__GPIO1_1             0x80000000
+			MX53_PAD_GPIO_9__GPIO1_9             0x80000000
+			MX53_PAD_EIM_EB3__GPIO2_31           0x80000000
+			MX53_PAD_GPIO_10__GPIO4_0            0x80000000
+			MX53_PAD_DISP0_DAT16__GPIO5_10	     0x80000000
+			MX53_PAD_DISP0_DAT17__GPIO5_11       0x80000000
+			MX53_PAD_DISP0_DAT18__GPIO5_12       0x80000000
+			MX53_PAD_DISP0_DAT19__GPIO5_13       0x80000000
+			MX53_PAD_EIM_D16__EMI_WEIM_D_16      0x80000000
+			MX53_PAD_EIM_D17__EMI_WEIM_D_17      0x80000000
+			MX53_PAD_EIM_D18__EMI_WEIM_D_18      0x80000000
+			MX53_PAD_EIM_D19__EMI_WEIM_D_19      0x80000000
+			MX53_PAD_EIM_D20__EMI_WEIM_D_20      0x80000000
+			MX53_PAD_EIM_D21__EMI_WEIM_D_21      0x80000000
+			MX53_PAD_EIM_D22__EMI_WEIM_D_22      0x80000000
+			MX53_PAD_EIM_D23__EMI_WEIM_D_23      0x80000000
+			MX53_PAD_EIM_D24__EMI_WEIM_D_24      0x80000000
+			MX53_PAD_EIM_D25__EMI_WEIM_D_25      0x80000000
+			MX53_PAD_EIM_D26__EMI_WEIM_D_26      0x80000000
+			MX53_PAD_EIM_D27__EMI_WEIM_D_27      0x80000000
+			MX53_PAD_EIM_D28__EMI_WEIM_D_28      0x80000000
+			MX53_PAD_EIM_D29__EMI_WEIM_D_29      0x80000000
+			MX53_PAD_EIM_D30__EMI_WEIM_D_30      0x80000000
+			MX53_PAD_EIM_D31__EMI_WEIM_D_31      0x80000000
+			MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x80000000
+			MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x80000000
+			MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x80000000
+			MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x80000000
+			MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x80000000
+			MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x80000000
+			MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x80000000
+			MX53_PAD_EIM_OE__EMI_WEIM_OE	     0x80000000
+			MX53_PAD_EIM_RW__EMI_WEIM_RW	     0x80000000
+			MX53_PAD_EIM_CS1__EMI_WEIM_CS_1	     0x80000000
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_PATA_DATA8__ESDHC1_DAT4	0x1d5
+			MX53_PAD_PATA_DATA9__ESDHC1_DAT5	0x1d5
+			MX53_PAD_PATA_DATA10__ESDHC1_DAT6	0x1d5
+			MX53_PAD_PATA_DATA11__ESDHC1_DAT7	0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts
index cfb18849a92b..0814f5665a59 100644
--- a/arch/arm/boot/dts/imx53-cx9020.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts
@@ -22,7 +22,7 @@
 	};
 
 	display-0 {
-		#address-cells =<1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "fsl,imx-parallel-display";
 		interface-pix-fmt = "rgb24";
@@ -86,27 +86,27 @@
 	leds {
 		compatible = "gpio-leds";
 
-		pwr-r {
+		led-pwr-r {
 			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		pwr-g {
+		led-pwr-g {
 			gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		pwr-b {
+		led-pwr-b {
 			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		sd1-b {
+		led-sd1-b {
 			linux,default-trigger = "mmc0";
 			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		sd2-b {
+		led-sd2-b {
 			linux,default-trigger = "mmc1";
 			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-kp-ddc.dts b/arch/arm/boot/dts/nxp/imx/imx53-kp-ddc.dts
new file mode 100644
index 000000000000..9c480e4d27ce
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-kp-ddc.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx53-kp.dtsi"
+
+/ {
+	model = "K+P imx53 DDC";
+	compatible = "kiebackpeter,imx53-ddc", "fsl,imx53";
+
+	backlight_lcd: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000 0>;
+		power-supply = <&reg_backlight>;
+		brightness-levels = <0 24 28 32 36
+				     40 44 48 52 56
+				     60 64 68 72 76
+				     80 84 88 92 96 100>;
+		default-brightness-level = <20>;
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp>;
+
+		port@0 {
+			reg = <0>;
+
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "koe,tx14d24vm1bpa";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-supply";
+		regulator-min-microvolt = <15000000>;
+		regulator-max-microvolt = <15000000>;
+		regulator-always-on;
+	};
+};
+
+&fec {
+	status = "okay";
+};
+
+&i2c3 {
+	adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+	};
+
+	gpio-expander2@21 {
+		compatible = "nxp,pcf8574";
+		reg = <0x21>;
+		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&iomuxc {
+	pinctrl_disp: dispgrp {
+		fsl,pins = <
+			MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK      0x4
+			MX53_PAD_EIM_DA10__IPU_DI1_PIN15        0x4
+			MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0       0x4
+			MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1       0x4
+			MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2       0x4
+			MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3       0x4
+			MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4       0x4
+			MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5       0x4
+			MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6       0x4
+			MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7       0x4
+			MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8       0x4
+			MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9       0x4
+			MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10      0x4
+			MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11      0x4
+			MX53_PAD_EIM_A17__IPU_DISP1_DAT_12      0x4
+			MX53_PAD_EIM_A18__IPU_DISP1_DAT_13      0x4
+			MX53_PAD_EIM_A19__IPU_DISP1_DAT_14      0x4
+			MX53_PAD_EIM_A20__IPU_DISP1_DAT_15      0x4
+			MX53_PAD_EIM_A21__IPU_DISP1_DAT_16      0x4
+			MX53_PAD_EIM_A22__IPU_DISP1_DAT_17      0x4
+			MX53_PAD_EIM_A23__IPU_DISP1_DAT_18      0x4
+			MX53_PAD_EIM_A24__IPU_DISP1_DAT_19      0x4
+			MX53_PAD_EIM_D31__IPU_DISP1_DAT_20      0x4
+			MX53_PAD_EIM_D30__IPU_DISP1_DAT_21      0x4
+			MX53_PAD_EIM_D26__IPU_DISP1_DAT_22      0x4
+			MX53_PAD_EIM_D27__IPU_DISP1_DAT_23      0x4
+			MX53_PAD_GPIO_1__PWM2_PWMO 0x4
+		>;
+	};
+};
+
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
+&pmic {
+	fsl,mc13xxx-uses-touch;
+};
diff --git a/arch/arm/boot/dts/imx53-kp-hsc.dts b/arch/arm/boot/dts/nxp/imx/imx53-kp-hsc.dts
index 6e3d71baac0f..6e3d71baac0f 100644
--- a/arch/arm/boot/dts/imx53-kp-hsc.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-kp-hsc.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi
new file mode 100644
index 000000000000..543cf723008f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx53-tqma53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	buzzer {
+		compatible = "pwm-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_buzzer>;
+		pwms = <&pwm1 0 500000 0>;
+	};
+
+	gpio-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobuttons>;
+
+		button-kalt {
+			label = "Kaltstart";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-pwr {
+			label = "PowerFailInterrupt";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-bus {
+			label = "bus";
+			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+		};
+
+		led-error {
+			label = "error";
+			gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+		};
+
+		led-flash {
+			label = "flash";
+			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	gpio-expander1@22 {
+		compatible = "nxp,pcf8574";
+		reg = <0x22>;
+		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kp_common>;
+
+	pinctrl_buzzer: buzzergrp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA3__PWM1_PWMO 0x1e4
+		>;
+	};
+
+	pinctrl_gpiobuttons: gpiobuttonsgrp {
+		fsl,pins = <
+			MX53_PAD_EIM_RW__GPIO2_26 0x1e4
+			MX53_PAD_EIM_D22__GPIO3_22 0x1e4
+		>;
+	};
+
+	pinctrl_kp_common: kpcommongrp {
+		fsl,pins = <
+			MX53_PAD_EIM_CS0__GPIO2_23 0x1e4
+			MX53_PAD_GPIO_19__GPIO4_5  0x1e4
+			MX53_PAD_PATA_DATA6__GPIO2_6 0x1e4
+			MX53_PAD_PATA_DATA7__GPIO2_7 0xe0
+			MX53_PAD_CSI0_DAT14__GPIO6_0 0x1e4
+			MX53_PAD_CSI0_DAT16__GPIO6_2 0x1e4
+			MX53_PAD_CSI0_DAT18__GPIO6_4 0x1e4
+			MX53_PAD_EIM_D17__GPIO3_17 0x1e4
+			MX53_PAD_EIM_D18__GPIO3_18 0x1e4
+			MX53_PAD_EIM_D21__GPIO3_21 0x1e4
+			MX53_PAD_EIM_D29__GPIO3_29 0x1e4
+			MX53_PAD_EIM_DA11__GPIO3_11 0x1e4
+			MX53_PAD_EIM_DA13__GPIO3_13 0x1e4
+			MX53_PAD_EIM_DA14__GPIO3_14 0x1e4
+			MX53_PAD_SD1_DATA0__GPIO1_16 0x1e4
+			MX53_PAD_SD1_CMD__GPIO1_18 0x1e4
+			MX53_PAD_SD1_CLK__GPIO1_20 0x1e4
+		>;
+	};
+
+	pinctrl_leds: ledgrp {
+		fsl,pins = <
+			MX53_PAD_EIM_EB2__GPIO2_30 0x1d4
+			MX53_PAD_EIM_D28__GPIO3_28 0x1d4
+			MX53_PAD_EIM_WAIT__GPIO5_0 0x1d4
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1e4
+			MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1e4
+		>;
+	};
+};
+
+&pinctrl_uart1 {
+	fsl,pins = <
+		MX53_PAD_EIM_D23__GPIO3_23 0x1e4
+		MX53_PAD_EIM_EB3__GPIO2_31 0x1e4
+		MX53_PAD_EIM_D24__GPIO3_24 0x1e4
+		MX53_PAD_EIM_D25__GPIO3_25 0x1e4
+		MX53_PAD_EIM_D19__GPIO3_19 0x1e4
+		MX53_PAD_EIM_D20__GPIO3_20 0x1e4
+	>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi
new file mode 100644
index 000000000000..89b17509ad48
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "Aries/DENX M53";
+	compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	reg_3p2v: regulator-3p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P2V";
+		regulator-min-microvolt = <3200000>;
+		regulator-max-microvolt = <3200000>;
+		regulator-always-on;
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-supply";
+		regulator-min-microvolt = <3200000>;
+		regulator-max-microvolt = <3200000>;
+		regulator-always-on;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@41 {
+		compatible = "st,stmpe610";
+		reg = <0x41>;
+		id = <0>;
+		blocks = <0x5>;
+		interrupts = <6 0x0>;
+		interrupt-parent = <&gpio7>;
+		irq-trigger = <0x1>;
+
+		touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <3>;
+			st,touch-det-delay = <3>;
+			st,settling = <4>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
+			MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
+			MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D16__I2C2_SDA		0xc0000000
+			MX53_PAD_EIM_EB2__I2C2_SCL		0xc0000000
+		>;
+	};
+
+	pinctrl_nand: nandgrp {
+		fsl,pins = <
+			MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+			MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+			MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+			MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+			MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+			MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+			MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+			MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
+			MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
+			MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
+			MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
+			MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
+			MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
+			MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
+			MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
+		>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts b/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts
new file mode 100644
index 000000000000..eb3d66305395
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx53-m53.dtsi"
+
+/ {
+	model = "Aries/DENX M53EVK";
+	compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53";
+
+	display1: disp1 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing-800x480p60 {
+				clock-frequency = <31500000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <40>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				vback-porch = <33>;
+				vfront-porch = <9>;
+				vsync-len = <3>;
+				vsync-active = <1>;
+			};
+		};
+
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 3000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&reg_backlight>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio>;
+
+		led-user1 {
+			label = "user1";
+			gpios = <&gpio2 8 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user2 {
+			label = "user2";
+			gpios = <&gpio2 9 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 0>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 4 0>;
+	};
+
+	sound {
+		compatible = "fsl,imx53-m53evk-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-m53evk-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Ext Spk", "LINE_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_usb: usbgrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_2__GPIO1_2		0x80000000
+			MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x80000000
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_4__GPIO1_4		0x000b0
+		>;
+	};
+
+	led_pin_gpio: ledgpiogrp {
+		fsl,pins = <
+			MX53_PAD_PATA_DATA8__GPIO2_8		0x80000000
+			MX53_PAD_PATA_DATA9__GPIO2_9		0x80000000
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x80000000
+			MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x80000000
+			MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x80000000
+			MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x80000000
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
+			MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
+			MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
+			MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+			MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
+		>;
+	};
+
+	pinctrl_ipu_disp1: ipudisp1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0	0x5
+			MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1	0x5
+			MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2	0x5
+			MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3	0x5
+			MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4	0x5
+			MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5	0x5
+			MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6	0x5
+			MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7	0x5
+			MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8	0x5
+			MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9	0x5
+			MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10	0x5
+			MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11	0x5
+			MX53_PAD_EIM_A17__IPU_DISP1_DAT_12	0x5
+			MX53_PAD_EIM_A18__IPU_DISP1_DAT_13	0x5
+			MX53_PAD_EIM_A19__IPU_DISP1_DAT_14	0x5
+			MX53_PAD_EIM_A20__IPU_DISP1_DAT_15	0x5
+			MX53_PAD_EIM_A21__IPU_DISP1_DAT_16	0x5
+			MX53_PAD_EIM_A22__IPU_DISP1_DAT_17	0x5
+			MX53_PAD_EIM_A23__IPU_DISP1_DAT_18	0x5
+			MX53_PAD_EIM_A24__IPU_DISP1_DAT_19	0x5
+			MX53_PAD_EIM_D31__IPU_DISP1_DAT_20	0x5
+			MX53_PAD_EIM_D30__IPU_DISP1_DAT_21	0x5
+			MX53_PAD_EIM_D26__IPU_DISP1_DAT_22	0x5
+			MX53_PAD_EIM_D27__IPU_DISP1_DAT_23	0x5
+			MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK	0x5
+			MX53_PAD_EIM_DA13__IPU_DI1_D0_CS	0x5
+			MX53_PAD_EIM_DA14__IPU_DI1_D1_CS	0x5
+			MX53_PAD_EIM_DA15__IPU_DI1_PIN1		0x5
+			MX53_PAD_EIM_DA11__IPU_DI1_PIN2		0x5
+			MX53_PAD_EIM_DA12__IPU_DI1_PIN3		0x5
+			MX53_PAD_EIM_A25__IPU_DI1_PIN12		0x5
+			MX53_PAD_EIM_DA10__IPU_DI1_PIN15	0x5
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT8__PWM1_PWMO		0x5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+			MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+			MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+			MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
+			MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+		>;
+	};
+};
+
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb>;
+	vbus-supply = <&reg_usbh1_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts b/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts
new file mode 100644
index 000000000000..6210673f93be
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx53-m53.dtsi"
+
+/ {
+	model = "MENLO M53 EMBEDDED DEVICE";
+	compatible = "menlo,m53menlo", "fsl,imx53";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_power_button>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power button";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pinctrl_power_out>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-user1 {
+			label = "TestLed601";
+			gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-user2 {
+			label = "TestLed602";
+			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-eth {
+			label = "EthLedYe";
+			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "netdev";
+		};
+	};
+
+	lvds-decoder {
+		compatible = "ti,ds90cf364a", "lvds-decoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_decoder_in: endpoint {
+					data-mapping = "jeida-18";
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0dh6";
+		pinctrl-0 = <&pinctrl_display_gpio>;
+		pinctrl-names = "default";
+		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_decoder_out>;
+			};
+		};
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+		pinctrl-0 = <&pinctrl_beeper>;
+		gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 0>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>,
+			  <&clks IMX5_CLK_CKO1_PODF>,
+			  <&clks IMX5_CLK_CKO1>;
+	assigned-clock-parents = <&clks IMX5_CLK_AHB>;
+	assigned-clock-rates = <133333334>, <33333334>, <33333334>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio2 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	spidev@0 {
+		compatible = "menlo,m53cpld";
+		spi-max-frequency = <25000000>;
+		reg = <0>;
+	};
+
+	spidev@1 {
+		compatible = "menlo,m53cpld";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"TestPin_SV2_3", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"CPLD_JTAG_TDI", "CPLD_JTAG_TMS", "", "",
+		"", "CPLD_JTAG_TDO", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "CPLD_JTAG_TCK", "KBD_intK",
+		"CPLD_int", "CPLD_JTAG_internal", "CPLD_D[0]", "CPLD_D[1]",
+		"CPLD_D[2]", "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]",
+		"CPLD_D[6]", "CPLD_D[7]", "DISP_reset", "KBD_intI";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "",
+		"CPLD_reset", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "USB-OTG_OverCurrent", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	dac@60 {
+		compatible = "microchip,mcp4725";
+		reg = <0x60>;
+	};
+};
+
+&i2c2 {
+	touchscreen@41 {
+		status = "disabled";
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hoggrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_19__CCM_CLKO		0x1e4
+			MX53_PAD_CSI0_DATA_EN__GPIO5_20		0x1e4
+			MX53_PAD_CSI0_DAT4__GPIO5_22		0x1e4
+			MX53_PAD_CSI0_DAT5__GPIO5_23		0x1c4
+			MX53_PAD_CSI0_DAT6__GPIO5_24		0x1e4
+			MX53_PAD_CSI0_DAT7__GPIO5_25		0x1e4
+			MX53_PAD_CSI0_DAT8__GPIO5_26		0x1e4
+			MX53_PAD_CSI0_DAT9__GPIO5_27		0x1c4
+			MX53_PAD_CSI0_DAT10__GPIO5_28		0x1e4
+			MX53_PAD_CSI0_DAT11__GPIO5_29		0x1e4
+			MX53_PAD_PATA_DATA11__GPIO2_11		0x1e4
+			MX53_PAD_EIM_D24__GPIO3_24		0x1e4
+			MX53_PAD_EIM_D25__GPIO3_25		0x1e4
+			MX53_PAD_EIM_D29__GPIO3_29		0x1e4
+			MX53_PAD_CSI0_PIXCLK__GPIO5_18		0x1e4
+			MX53_PAD_CSI0_VSYNC__GPIO5_21		0x1e4
+			MX53_PAD_CSI0_DAT18__GPIO6_4		0x1c4
+			MX53_PAD_PATA_DATA8__GPIO2_8		0x1e4
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT15__GPIO6_1		0x1c4
+			MX53_PAD_CSI0_DAT16__GPIO6_2		0x1c4
+		>;
+	};
+
+	pinctrl_beeper: beepergrp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT17__GPIO6_3		0x1c4
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_7__CAN1_TXCAN		0x1c4
+			MX53_PAD_GPIO_8__CAN1_RXCAN		0x1c4
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL4__CAN2_TXCAN		0x1e4
+			MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x1c4
+		>;
+	};
+
+	pinctrl_display_gpio: display-gpiogrp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT12__GPIO5_30		0x1c4 /* Reset */
+			MX53_PAD_CSI0_MCLK__GPIO5_19		0x1e4 /* Int-K */
+			MX53_PAD_CSI0_DAT13__GPIO5_31		0x1c4 /* Int-I */
+
+			MX53_PAD_CSI0_DAT14__GPIO6_0		0x1c4 /* Power down */
+		>;
+	};
+
+	pinctrl_edt_ft5x06: edt-ft5x06grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DATA9__GPIO2_9		0x1e4 /* Reset */
+			MX53_PAD_CSI0_DAT19__GPIO6_5		0x1c4 /* Interrupt */
+			MX53_PAD_PATA_DATA10__GPIO2_10		0x1e4 /* Wake */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX53_PAD_EIM_CS0__ECSPI2_SCLK		0xe4
+			MX53_PAD_EIM_OE__ECSPI2_MISO		0xe4
+			MX53_PAD_EIM_CS1__ECSPI2_MOSI		0xe4
+			MX53_PAD_EIM_RW__GPIO2_26		0xe4
+			MX53_PAD_EIM_LBA__GPIO2_27		0xe4
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1e4
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1e4
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1e4
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1e4
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1e4
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1e4
+			MX53_PAD_GPIO_1__GPIO1_1		0x1c4
+			MX53_PAD_GPIO_9__GPIO1_9		0x1e4
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x1e4
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x1e4
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x1e4
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x1e4
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x1e4
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x1e4
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x1e4
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x1c4
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x1e4
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x1e4
+			MX53_PAD_PATA_DA_1__GPIO7_7		0x1e4
+			MX53_PAD_EIM_EB3__GPIO2_31		0x1e4
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+			MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
+			MX53_PAD_GPIO_5__I2C3_SCL		0x400001e4
+		>;
+	};
+
+	pinctrl_lvds0: lvds0grp {
+		/* LVDS pins only have pin mux configuration */
+		fsl,pins = <
+			MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
+			MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
+			MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
+			MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
+			MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
+		>;
+	};
+
+	pinctrl_power_button: powerbutgrp {
+		fsl,pins = <
+			MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
+		>;
+	};
+
+	pinctrl_power_out: poweroutgrp {
+		fsl,pins = <
+			MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			MX53_PAD_PATA_IORDY__UART1_RTS		0x1e4
+			MX53_PAD_PATA_RESET_B__UART1_CTS	0x1e4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+			MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DIOR__UART2_RTS		0x1e4
+			MX53_PAD_PATA_INTRQ__UART2_CTS		0x1e4
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+			MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+		>;
+	};
+
+	pinctrl_usb: usbgrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_2__GPIO1_2		0x1c4
+			MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x1c4
+			MX53_PAD_GPIO_4__GPIO1_4		0x1c4
+			MX53_PAD_GPIO_18__GPIO7_13		0x1c4
+		>;
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		reg = <0>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@2 {
+			reg = <2>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_decoder_in>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb>;
+	vbus-supply = <&reg_usbh1_vbus>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
new file mode 100644
index 000000000000..3cdb87ac1d7c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx53-tqma53.dtsi"
+
+/ {
+	model = "TQ MBa53 starter kit";
+	compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000 0>;
+		brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
+		default-brightness-level = <10>;
+		enable-gpios = <&gpio7 7 0>;
+		power-supply = <&reg_backlight>;
+	};
+
+	disp1: disp1 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp1_1>;
+		interface-pix-fmt = "rgb24";
+		status = "disabled";
+
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-supply";
+		gpio = <&gpio2 5 0>;
+		startup-delay-us = <5000>;
+	};
+
+	reg_3p2v: regulator-3p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P2V";
+		regulator-min-microvolt = <3200000>;
+		regulator-max-microvolt = <3200000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "tq,imx53-mba53-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-mba53-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds1_1>;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_lvds1_1: lvds1-1-grp {
+		fsl,pins = <
+			MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
+			MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
+			MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
+			MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
+			MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
+		>;
+	};
+
+	pinctrl_lvds1_2: lvds1-2-grp {
+		fsl,pins = <
+			MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
+			MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
+			MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
+			MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
+			MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
+		>;
+	};
+
+	pinctrl_disp1_1: disp1-1-grp {
+		fsl,pins = <
+			MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */
+			MX53_PAD_EIM_DA10__IPU_DI1_PIN15   0x80000000 /* DISP1_DRDY */
+			MX53_PAD_EIM_D23__IPU_DI1_PIN2     0x80000000 /* DISP1_HSYNC */
+			MX53_PAD_EIM_EB3__IPU_DI1_PIN3     0x80000000 /* DISP1_VSYNC */
+			MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000
+			MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000
+			MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000
+			MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000
+			MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000
+			MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000
+			MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000
+			MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000
+			MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000
+			MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000
+			MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000
+			MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000
+			MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000
+			MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000
+			MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9  0x80000000
+			MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8  0x80000000
+			MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7  0x80000000
+			MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6  0x80000000
+			MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5  0x80000000
+			MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4  0x80000000
+			MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3  0x80000000
+			MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2  0x80000000
+			MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1  0x80000000
+			MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0  0x80000000
+		>;
+	};
+
+	pinctrl_vga_sync_1: vgasync-1-grp {
+		fsl,pins = <
+			/* VGA_VSYNC, HSYNC with max drive strength */
+			MX53_PAD_EIM_CS1__IPU_DI1_PIN6	   0xe6
+			MX53_PAD_EIM_DA15__IPU_DI1_PIN4	   0xe6
+		>;
+	};
+};
+
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
+&cspi {
+	status = "okay";
+};
+
+&audmux {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+};
+
+&i2c2 {
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
+	};
+
+	expander: pca9554@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	sensor2: temperature-sensor@49 {
+		compatible = "national,lm75b";
+		reg = <0x49>;
+	};
+};
+
+&fec {
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&esdhc2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&ecspi1 {
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&tve {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vga_sync_1>;
+	ddc-i2c-bus = <&i2c3>;
+	fsl,tve-mode = "vga";
+	fsl,hsync-pin = <4>;
+	fsl,vsync-pin = <6>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx53-pinfunc.h
index 67bd06610fdf..67bd06610fdf 100644
--- a/arch/arm/boot/dts/imx53-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx53-pinfunc.h
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts
index 37d0cffea99c..2892e457fea7 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts
@@ -167,7 +167,7 @@
 
 	pwm_bl: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
+		pwms = <&pwm2 0 50000 0>;
 		brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35
 				     38 40 43 45 48 51 53 56 58 61 63 66 68 71
 				     73 76 79 81 84 86 89 91 94 96 99 102 104
@@ -187,7 +187,7 @@
 
 		led-1 {
 			label = "alarm-brightness";
-			pwms = <&pwm1 0 100000>;
+			pwms = <&pwm1 0 100000 0>;
 			max-brightness = <255>;
 		};
 	};
@@ -488,7 +488,7 @@
 	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9547";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -593,7 +593,7 @@
 
 	touchscreen@4b {
 		compatible = "atmel,maxtouch";
-		reset-gpio = <&gpio5 19 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;
 		reg = <0x4b>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
@@ -628,14 +628,12 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi
new file mode 100644
index 000000000000..1869ad86baf2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include "imx53.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	backlight_parallel: backlight-parallel {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	display0: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio7_7>;
+
+		led-user {
+			label = "Heartbeat";
+			gpios = <&gpio7 7 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel_dpi: panel {
+		compatible = "sii,43wvf1g";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_display_power>;
+		backlight = <&backlight_parallel>;
+		enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	reg_3p2v: regulator-3p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P2V";
+		regulator-min-microvolt = <3200000>;
+		regulator-max-microvolt = <3200000>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 8 0>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx53-qsb-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-qsb-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+};
+
+&cpu0 {
+	/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
+	operating-points = <
+		/* kHz   uV */
+		166666  850000
+		400000  900000
+		800000  1050000
+		1000000 1200000
+	>;
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_8__GPIO1_8          0x80000000
+			MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
+			MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
+			MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
+			MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
+			MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
+			MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
+			MX53_PAD_GPIO_16__GPIO7_11        0x80000000
+		>;
+	};
+
+	led_pin_gpio7_7: led_gpio7-7-grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+			MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+			MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+			MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
+		>;
+	};
+
+	pinctrl_display_power: displaypowergrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D24__GPIO3_24		0x1e4
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			MX53_PAD_EIM_DA13__GPIO3_13		0xe4
+		>;
+	};
+
+	pinctrl_esdhc3: esdhc3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+			MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+			MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+			MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+			MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+			MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+			MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+			MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+			MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+			MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x4
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
+		>;
+	};
+
+	/* open drain */
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT8__I2C1_SDA		0x400001ec
+			MX53_PAD_CSI0_DAT9__I2C1_SCL		0x400001ec
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+			MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+		>;
+	};
+
+	pinctrl_ipu_disp0: ipudisp0grp {
+		fsl,pins = <
+			MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
+			MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
+			MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
+			MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
+			MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
+			MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
+			MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
+			MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
+			MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
+			MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
+			MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
+			MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
+			MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
+			MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
+			MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
+			MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
+			MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
+			MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
+			MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
+			MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
+			MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
+			MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
+			MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
+			MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
+			MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
+			MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
+			MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
+			MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_1__PWM2_PWMO		0x5
+		>;
+	};
+
+	pinctrl_vga_sync: vgasync-grp {
+		fsl,pins = <
+			/* VGA_HSYNC, VSYNC with max drive strength */
+			MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
+			MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+		>;
+	};
+};
+
+&tve {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vga_sync>;
+	ddc-i2c-bus = <&i2c2>;
+	fsl,tve-mode = "vga";
+	fsl,hsync-pin = <7>;	/* IPU DI1 PIN7 via EIM_OE */
+	fsl,vsync-pin = <8>;	/* IPU DI1 PIN8 via EIM_RW */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	accelerometer: mma8450@1c {
+		compatible = "fsl,mma8450";
+		reg = <0x1c>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&vpu {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso b/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso
new file mode 100644
index 000000000000..2527bfe13145
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * DT overlay for MCIMXHDMICARD as used with the iMX53 QSB or QSRB boards
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	hdmi: connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&reg_3p2v>;
+	};
+};
+
+&display0 {
+	status = "okay";
+
+	port@1 {
+		display0_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	sii9022: bridge-hdmi@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+		interrupts-extended = <&gpio3 31 IRQ_TYPE_LEVEL_LOW>;
+		iovcc-supply = <&reg_3p2v>;
+		#sound-dai-cells = <0>;
+		sil,i2s-data-lanes = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&display0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&panel_dpi {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/nxp/imx/imx53-qsb.dts
index 6831836bd726..6831836bd726 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb.dts
diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts
index 1bbf24ad308a..2f06ad61a766 100644
--- a/arch/arm/boot/dts/imx53-qsrb.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts
@@ -13,12 +13,10 @@
 };
 
 &iomuxc {
-	imx53-qsrb {
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT5__GPIO5_23	0x1c4 /* IRQ */
-			>;
-		};
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT5__GPIO5_23	0x1c4 /* IRQ */
+		>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts
new file mode 100644
index 000000000000..b1c1e7c759b3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2023 Linaro Ltd.
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include "imx53-sk-imx53-atm0700d4.dtsi"
+
+/ {
+	lvds-decoder {
+		compatible = "ti,sn65lvds94", "lvds-decoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_decoder_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_rgb_in>;
+				};
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_lvds0: lvds0grp {
+		/* LVDS pins only have pin mux configuration */
+		fsl,pins = <
+			MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
+			MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
+			MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
+			MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
+			MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
+		>;
+	};
+
+	pinctrl_spi_gpio: spigrp {
+		fsl,pins = <
+			MX53_PAD_EIM_A22__GPIO2_16		0x1f4
+			MX53_PAD_EIM_A21__GPIO2_17		0x1f4
+			MX53_PAD_EIM_A16__GPIO2_22		0x1f4
+			MX53_PAD_EIM_A18__GPIO2_20		0x1f4
+		>;
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		reg = <0>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@2 {
+			reg = <2>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_decoder_in>;
+			};
+		};
+	};
+};
+
+&panel_rgb_in {
+	remote-endpoint = <&lvds_decoder_out>;
+};
+
+&spi_ts {
+	pinctrl-0 = <&pinctrl_spi_gpio>;
+	pinctrl-names = "default";
+
+	sck-gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+	miso-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+	mosi-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+};
+
+&touchscreen {
+	interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_BOTH>;
+	pendown-gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-rgb.dts b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-rgb.dts
new file mode 100644
index 000000000000..2559ada7e401
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-rgb.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2023 Linaro Ltd.
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include "imx53-sk-imx53-atm0700d4.dtsi"
+
+/ {
+	display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-0 = <&pinctrl_rgb24>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_rgb_in>;
+			};
+		};
+	};
+
+};
+
+&iomuxc {
+	pinctrl_rgb24: rgb24grp {
+		fsl,pins = <
+			MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK		0x5
+			MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		0x5
+			MX53_PAD_DI0_PIN2__IPU_DI0_PIN2			0x5
+			MX53_PAD_DI0_PIN3__IPU_DI0_PIN3			0x5
+			MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		0x5
+			MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		0x5
+			MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		0x5
+			MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		0x5
+			MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		0x5
+			MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		0x5
+			MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		0x5
+			MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		0x5
+			MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		0x5
+			MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		0x5
+			MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		0x5
+			MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		0x5
+			MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		0x5
+			MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		0x5
+			MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		0x5
+			MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		0x5
+			MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		0x5
+			MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		0x5
+			MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		0x5
+			MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		0x5
+			MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		0x5
+			MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		0x5
+			MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		0x5
+			MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		0x5
+		>;
+	};
+
+	pinctrl_spi_gpio: spigrp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA1__GPIO1_17		0x1f4
+			MX53_PAD_GPIO_7__GPIO1_7		0x1f4
+			MX53_PAD_PATA_DATA3__GPIO2_3		0x1f4
+			MX53_PAD_PATA_DATA8__GPIO2_8		0x1f4
+		>;
+	};
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&panel {
+	enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+};
+
+&panel_rgb_in {
+	remote-endpoint = <&display_out>;
+};
+
+&pwm1 {
+	status = "disabled";
+};
+
+&spi_ts {
+	pinctrl-0 = <&pinctrl_spi_gpio>;
+	pinctrl-names = "default";
+
+	sck-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+	mosi-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	miso-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+};
+
+&touchscreen {
+	interrupts-extended = <&gpio2 6 IRQ_TYPE_EDGE_BOTH>;
+	pendown-gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi
new file mode 100644
index 000000000000..e395004e80e6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2023 Linaro Ltd.
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include "imx53-sk-imx53.dts"
+
+/ {
+	panel: panel-rgb {
+		compatible = "powertip,ph800480t013-idf02";
+
+		port {
+			panel_rgb_in: endpoint {
+			};
+		};
+	};
+
+	spi_ts: spi {
+		compatible = "spi-gpio";
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+
+		num-chipselects = <1>;
+
+		touchscreen: touchscreen@0 {
+			reg = <0>;
+			compatible = "ti,ads7843";
+			spi-max-frequency = <300000>;
+
+			ti,vref-mv = /bits/ 16 <3300>;
+			ti,x-plate-ohms = /bits/ 16 <450>;
+			ti,y-plate-ohms = /bits/ 16 <250>;
+			ti,debounce-tol = /bits/ 16 <10>;
+			ti,debounce-rep = /bits/ 16 <0>;
+			touchscreen-size-x = <4096>;
+			touchscreen-size-y = <4096>;
+			touchscreen-swapped-x-y;
+			touchscreen-max-pressure = <100>;
+
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts
new file mode 100644
index 000000000000..1a00d290092a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2023 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx53.dtsi"
+
+/ {
+	model = "StarterKit SK-iMX53 Board";
+	compatible = "starterkit,sk-imx53", "fsl,imx53";
+
+	aliases {
+		/*
+		 * iMX RTC is not battery powered on this board.
+		 * Use the i2c RTC as rtc0.
+		 */
+		rtc0 = &rtc;
+		rtc1 = &srtc;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		/* v2 had only 256 MB, v3 has 512 MB */
+		reg = <0x70000000 0x20000000>;
+	};
+
+	reg_usb1_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&cpu0 {
+	/* CPU rated to 800 MHz, not the default 1.2GHz. */
+	operating-points = <
+		/* kHz   uV */
+		166666  850000
+		400000  900000
+		800000  1050000
+	>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&esdhc1 {
+	cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
+	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		#sound-dai-cells = <0>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "dallas,ds1338";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x1e4
+			MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x1e4
+			MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x1e4
+			MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x1e4
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_INTRQ__CAN1_TXCAN		0x1e4
+			MX53_PAD_PATA_DIOR__CAN1_RXCAN		0x1e4
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D16__ECSPI1_SCLK		0x1e4
+			MX53_PAD_EIM_D17__ECSPI1_MISO		0x1e4
+			MX53_PAD_EIM_D18__ECSPI1_MOSI		0x1e4
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT9__ECSPI2_MOSI		0x1e4
+			MX53_PAD_CSI0_DAT10__ECSPI2_MISO	0x1e4
+			MX53_PAD_EIM_CS0__ECSPI2_SCLK		0x1e4
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			MX53_PAD_EIM_DA14__GPIO3_14		0x1f0
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x1e4
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x1e4
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x1e4
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x1e4
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x1e4
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x1e4
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x1e4
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x1c4
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x1e4
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x1e4
+			MX53_PAD_GPIO_1__GPIO1_1		0x1c4
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+			MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__I2C2_SDA             0x400001e4
+			MX53_PAD_EIM_EB2__I2C2_SCL		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__GPIO4_13		0x1e4
+			MX53_PAD_EIM_EB2__GPIO2_30		0x1e4
+		>;
+	};
+
+	pinctrl_nand: nandgrp {
+		fsl,pins = <
+			MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+			MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+			MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+			MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+			MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+			MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+			MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+			MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1	0x4
+			MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2	0x4
+			MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3	0x4
+			MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	0xa4
+			MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	0xa4
+			MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	0xa4
+			MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	0xa4
+			MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	0xa4
+			MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	0xa4
+			MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	0xa4
+			MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	0xa4
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_9__PWM1_PWMO		0x5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D24__UART3_TXD_MUX		0x1e4
+			MX53_PAD_EIM_D25__UART3_RXD_MUX		0x1e4
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL0__UART4_TXD_MUX	0x1e4
+			MX53_PAD_KEY_ROW0__UART4_RXD_MUX	0x1e4
+		>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x00100000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "u-boot";
+			reg = <0x00100000 0x00100000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u-boot-env";
+			reg = <0x00200000 0x00100000>;
+			read-only;
+		};
+
+		partition@1000000 {
+			label = "kernel-safe";
+			reg = <0x01000000 0x00a00000>;
+			read-only;
+		};
+
+		partition@1a00000 {
+			label = "kernel";
+			reg = <0x01a00000 0x005e0000>;
+		};
+
+		partition@2000000 {
+			label = "ubifs";
+			reg = <0x02000000 0x0e000000>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	phy_type = "utmi";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-smd.dts b/arch/arm/boot/dts/nxp/imx/imx53-smd.dts
new file mode 100644
index 000000000000..386371c816f4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-smd.dts
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "imx53.dtsi"
+
+/ {
+	model = "Freescale i.MX53 Smart Mobile Reference Design Board";
+	compatible = "fsl,imx53-smd", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 14 0>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio2 15 0>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	non-removable;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	zigbee: mc1323@0 {
+		compatible = "fsl,mc1323";
+		spi-max-frequency = <8000000>;
+		reg = <0>;
+	};
+
+	flash: flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0x3c0000>;
+		};
+	};
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
+			MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
+			MX53_PAD_EIM_EB2__GPIO2_30     0x80000000
+			MX53_PAD_EIM_DA13__GPIO3_13    0x80000000
+			MX53_PAD_EIM_D19__GPIO3_19     0x80000000
+			MX53_PAD_KEY_ROW2__GPIO4_11    0x80000000
+			MX53_PAD_PATA_DA_0__GPIO7_6    0x80000000
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+			MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+			MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_esdhc2: esdhc2grp {
+		fsl,pins = <
+			MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+			MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+			MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+			MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+			MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+			MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+		>;
+	};
+
+	pinctrl_esdhc3: esdhc3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+			MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+			MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+			MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+			MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+			MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+			MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+			MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+			MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+			MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT8__I2C1_SDA		0xc0000000
+			MX53_PAD_CSI0_DAT9__I2C1_SCL		0xc0000000
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+			MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+		>;
+	};
+
+	pinctrl_ipu_csi0: ipucsi0grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12    0x1c4
+			MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13    0x1c4
+			MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14    0x1c4
+			MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15    0x1c4
+			MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16    0x1c4
+			MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17    0x1c4
+			MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18    0x1c4
+			MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19    0x1c4
+			MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1e4
+			MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC   0x1e4
+			MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC    0x1e4
+			MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1e4
+		>;
+	};
+
+	pinctrl_ov5642: ov5642grp {
+		fsl,pins = <
+			MX53_PAD_NANDF_WP_B__GPIO6_9   0x1e4
+			MX53_PAD_NANDF_RB0__GPIO6_10   0x1e4
+			MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+			MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+			MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+			MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
+			MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+	};
+
+	magnetometer: mag3110@e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+	};
+
+	touchkey: mpr121@5a {
+		compatible = "fsl,mpr121";
+		reg = <0x5a>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	accelerometer: mma8450@1c {
+		compatible = "fsl,mma8450";
+		reg = <0x1c>;
+	};
+
+	camera: ov5642@3c {
+		compatible = "ovti,ov5642";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5642>;
+		assigned-clocks = <&clks IMX5_CLK_SSI_EXT1_SEL>,
+				  <&clks IMX5_CLK_SSI_EXT1_COM_SEL>;
+		assigned-clock-parents = <&clks IMX5_CLK_PLL2_SW>,
+					 <&clks IMX5_CLK_SSI_EXT1_PODF>;
+		assigned-clock-rates = <0>, <24000000>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+		clock-names = "xclk";
+		DVDD-supply = <&ldo9_reg>;
+		AVDD-supply = <&ldo7_reg>;
+		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			ov5642_to_ipu_csi0: endpoint {
+				remote-endpoint = <&ipu_csi0_from_parallel_sensor>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+
+	pmic: dialog@48 {
+		compatible = "dlg,da9053", "dlg,da9052";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			ldo7_reg: ldo7 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3650000>;
+			};
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ipu_csi0_from_parallel_sensor {
+	remote-endpoint = <&ov5642_to_ipu_csi0>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vsync-active = <1>;
+};
+
+&ipu_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu_csi0>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
new file mode 100644
index 000000000000..0f0245df380f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "TQ TQMa53";
+	compatible = "tq,tqma53", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x40000000>; /* Up to 1GiB */
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>,
+		    <&pinctrl_esdhc2_cdwp>;
+	vmmc-supply = <&reg_3p3v>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "disabled";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
+		   <&gpio3 24 GPIO_ACTIVE_LOW>, <&gpio3 25 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&esdhc3 { /* EMMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
+			 MX53_PAD_PATA_DA_1__GPIO7_7     0x80000000 /* LCD_BLT_EN */
+			 MX53_PAD_PATA_DA_2__GPIO7_8     0x80000000 /* LCD_RESET */
+			 MX53_PAD_PATA_DATA5__GPIO2_5    0x80000000 /* LCD_POWER */
+			 MX53_PAD_PATA_DATA6__GPIO2_6    0x80000000 /* PMIC_INT */
+			 MX53_PAD_PATA_DATA14__GPIO2_14  0x80000000 /* CSI_RST */
+			 MX53_PAD_PATA_DATA15__GPIO2_15  0x80000000 /* CSI_PWDN */
+			 MX53_PAD_GPIO_19__GPIO4_5 	 0x80000000 /* #SYSTEM_DOWN */
+			 MX53_PAD_GPIO_3__GPIO1_3        0x80000000
+			 MX53_PAD_PATA_DA_0__GPIO7_6	 0x80000000 /* #PHY_RESET */
+			 MX53_PAD_GPIO_1__PWM2_PWMO	 0x80000000 /* LCD_CONTRAST */
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+			MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+			MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+			MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL2__CAN1_TXCAN		0x80000000
+			MX53_PAD_KEY_ROW2__CAN1_RXCAN		0x80000000
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
+			MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
+		>;
+	};
+
+	pinctrl_cspi: cspigrp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__CSPI_MISO		0x1d5
+			MX53_PAD_SD1_CMD__CSPI_MOSI		0x1d5
+			MX53_PAD_SD1_CLK__CSPI_SCLK		0x1d5
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+			MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+			MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+		>;
+	};
+
+	pinctrl_esdhc2: esdhc2grp {
+		fsl,pins = <
+			MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+			MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+			MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+			MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+			MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+			MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+		>;
+	};
+
+	pinctrl_esdhc2_cdwp: esdhc2cdwpgrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_4__GPIO1_4	0x80000000 /* SD2_CD */
+			MX53_PAD_GPIO_2__GPIO1_2	0x80000000 /* SD2_WP */
+		>;
+	};
+
+	pinctrl_esdhc3: esdhc3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+			MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+			MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+			MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+			MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+			MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+			MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+			MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+			MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+			MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+			MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+			MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+			MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+			MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "disabled";
+};
+
+&cspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi>;
+	cs-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>, <&gpio1 19 GPIO_ACTIVE_LOW>,
+		   <&gpio1 21 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: mc34708@8 {
+		compatible = "fsl,mc34708";
+		reg = <0x8>;
+		fsl,mc13xxx-uses-rtc;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 4>; /* PATA_DATA6, active high */
+	};
+
+	sensor1: temperature-sensor@48 {
+		compatible = "national,lm75b";
+		reg = <0x48>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts
new file mode 100644
index 000000000000..872cf7e16f20
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx53-tx53.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Ka-Ro electronics TX53 module (LCD)";
+	compatible = "karo,tx53", "fsl,imx53";
+
+	aliases {
+		display = &display;
+	};
+
+	display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rgb24_vga1>;
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			timing-vga {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-etc570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-et0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-et0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing-et0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-et0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-etq570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_3v3>;
+		brightness-levels = <
+			  0  1  2  3  4  5  6  7  8  9
+			 10 11 12 13 14 15 16 17 18 19
+			 20 21 22 23 24 25 26 27 28 29
+			 30 31 32 33 34 35 36 37 38 39
+			 40 41 42 43 44 45 46 47 48 49
+			 50 51 52 53 54 55 56 57 58 59
+			 60 61 62 63 64 65 66 67 68 69
+			 70 71 72 73 74 75 76 77 78 79
+			 80 81 82 83 84 85 86 87 88 89
+			 90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	reg_lcd_pwr: regulator-lcd-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reg_lcd_reset: regulator-lcd-reset {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD RESET";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
+	};
+
+	touchscreen: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = <660>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	pinctrl_edt_ft5x06_1: edt-ft5x06-1-grp {
+		fsl,pins = <
+			MX53_PAD_NANDF_CS2__GPIO6_15 0x1f0 /* Interrupt */
+			MX53_PAD_EIM_A16__GPIO2_22   0x04 /* Reset */
+			MX53_PAD_EIM_A17__GPIO2_21   0x04 /* Wake */
+		>;
+	};
+
+	pinctrl_kpp: kppgrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_9__KPP_COL_6 0x1f4
+			MX53_PAD_GPIO_4__KPP_COL_7 0x1f4
+			MX53_PAD_KEY_COL2__KPP_COL_2 0x1f4
+			MX53_PAD_KEY_COL3__KPP_COL_3 0x1f4
+			MX53_PAD_GPIO_2__KPP_ROW_6 0x1f4
+			MX53_PAD_GPIO_5__KPP_ROW_7 0x1f4
+			MX53_PAD_KEY_ROW2__KPP_ROW_2 0x1f4
+			MX53_PAD_KEY_ROW3__KPP_ROW_3 0x1f4
+		>;
+	};
+
+	pinctrl_rgb24_vga1: rgb24-vga1grp {
+		fsl,pins = <
+			MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK		0x5
+			MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		0x5
+			MX53_PAD_DI0_PIN2__IPU_DI0_PIN2			0x5
+			MX53_PAD_DI0_PIN3__IPU_DI0_PIN3			0x5
+			MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		0x5
+			MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		0x5
+			MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		0x5
+			MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		0x5
+			MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		0x5
+			MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		0x5
+			MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		0x5
+			MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		0x5
+			MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		0x5
+			MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		0x5
+			MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		0x5
+			MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		0x5
+			MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		0x5
+			MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		0x5
+			MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		0x5
+			MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		0x5
+			MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		0x5
+			MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		0x5
+			MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		0x5
+			MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		0x5
+			MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		0x5
+			MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		0x5
+			MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		0x5
+			MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		0x5
+		>;
+	};
+
+	pinctrl_tsc2007: tsc2007grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D26__GPIO3_26 0x1f0 /* Interrupt */
+		>;
+	};
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	/* sample keymap */
+	/* row/col 0,1 are mapped to KPP row/col 6,7 */
+	linux,keymap = <
+		MATRIX_KEY(6, 6, KEY_POWER)
+		MATRIX_KEY(6, 7, KEY_KP0)
+		MATRIX_KEY(6, 2, KEY_KP1)
+		MATRIX_KEY(6, 3, KEY_KP2)
+		MATRIX_KEY(7, 6, KEY_KP3)
+		MATRIX_KEY(7, 7, KEY_KP4)
+		MATRIX_KEY(7, 2, KEY_KP5)
+		MATRIX_KEY(7, 3, KEY_KP6)
+		MATRIX_KEY(2, 6, KEY_KP7)
+		MATRIX_KEY(2, 7, KEY_KP8)
+		MATRIX_KEY(2, 2, KEY_KP9)
+	>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts
new file mode 100644
index 000000000000..96c37f4296e5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx53-tx53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Ka-Ro electronics TX53 module (LVDS)";
+	compatible = "karo,tx53", "fsl,imx53";
+
+	aliases {
+		display = &lvds0;
+		lvds0 = &lvds0;
+		lvds1 = &lvds1;
+	};
+
+	backlight0: backlight0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		brightness-levels = <
+			  0  1  2  3  4  5  6  7  8  9
+			 10 11 12 13 14 15 16 17 18 19
+			 20 21 22 23 24 25 26 27 28 29
+			 30 31 32 33 34 35 36 37 38 39
+			 40 41 42 43 44 45 46 47 48 49
+			 50 51 52 53 54 55 56 57 58 59
+			 60 61 62 63 64 65 66 67 68 69
+			 70 71 72 73 74 75 76 77 78 79
+			 80 81 82 83 84 85 86 87 88 89
+			 90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	backlight1: backlight1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		brightness-levels = <
+			  0  1  2  3  4  5  6  7  8  9
+			 10 11 12 13 14 15 16 17 18 19
+			 20 21 22 23 24 25 26 27 28 29
+			 30 31 32 33 34 35 36 37 38 39
+			 40 41 42 43 44 45 46 47 48 49
+			 50 51 52 53 54 55 56 57 58 59
+			 60 61 62 63 64 65 66 67 68 69
+			 70 71 72 73 74 75 76 77 78 79
+			 80 81 82 83 84 85 86 87 88 89
+			 90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	reg_lcd_pwr0: regulator-lvds0-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LVDS0 POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reg_lcd_pwr1: regulator-lvds1-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LVDS1 POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+};
+
+&iomuxc {
+	pinctrl_lvds0: lvds0grp {
+		fsl,pins = <
+			MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
+			MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
+			MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
+			MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
+			MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
+		>;
+	};
+
+	pinctrl_lvds1: lvds1grp {
+		fsl,pins = <
+			MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
+			MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
+			MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
+			MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
+			MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <MX53_PAD_GPIO_9__PWM1_PWMO 0x04>;
+	};
+
+	pinctrl_eeti1: eeti1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D22__GPIO3_22 0x1f0 /* Interrupt */
+		>;
+	};
+
+	pinctrl_eeti2: eeti2grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D23__GPIO3_23 0x1f0 /* Interrupt */
+		>;
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0 &pinctrl_lvds1>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds0_timing0>;
+
+			lvds0_timing0: timing-hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hsync-len = <60>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vsync-len = <10>;
+				vfront-porch = <7>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			lvds0_timing1: timing-nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hsync-len = <60>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vsync-len = <13>;
+				vfront-porch = <5>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+
+	lvds1: lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds1_timing0>;
+
+			lvds1_timing0: timing-hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hsync-len = <60>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vsync-len = <10>;
+				vfront-porch = <7>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi
new file mode 100644
index 000000000000..88855d3b2031
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi
@@ -0,0 +1,546 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2012-2017 <LW@KARO-electronics.de>
+ * based on imx53-qsb.dts
+ *   Copyright 2011 Freescale Semiconductor, Inc.
+ *   Copyright 2011 Linaro Ltd.
+ */
+
+#include "imx53.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Ka-Ro electronics TX53 module";
+	compatible = "karo,tx53", "fsl,imx53";
+
+	/* Will be filled by the bootloader */
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0>;
+	};
+
+	aliases {
+		can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
+		can1 = &can1;
+		ipu = &ipu;
+		reg-can-xcvr = &reg_can_xcvr;
+		usbh1 = &usbh1;
+		usbotg = &usbotg;
+	};
+
+	clocks {
+		ckih1 {
+			clock-frequency = <0>;
+		};
+	};
+
+	mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_key>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+			linux,code = <116>; /* KEY_POWER */
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stk5led>;
+
+		led-user {
+			label = "Heartbeat";
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_2v5: regulator-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_xcvr>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "karo,tx53-audio-sgtl5000", "fsl,imx-audio-sgtl5000";
+		model = "tx53-audio-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		/* '1' based port numbers according to datasheet names */
+		mux-int-port = <1>;
+		mux-ext-port = <5>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ssi1>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	cs-gpios = <
+		&gpio2 30 GPIO_ACTIVE_HIGH
+		&gpio3 19 GPIO_ACTIVE_HIGH
+	>;
+
+};
+
+&esdhc1 {
+	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&esdhc2 {
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy0>;
+	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-0 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rtc1: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ds1339>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+		trickle-resistor-ohms = <250>;
+		trickle-diode-disable;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		/* pins not in use by any device on the Starterkit board series */
+		fsl,pins = <
+			/* CMOS Sensor Interface */
+			MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4
+			MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4
+			MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4
+			MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4
+			MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4
+			MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4
+			MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4
+			MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4
+			MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4
+			MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4
+			MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4
+			MX53_PAD_GPIO_0__GPIO1_0 0x1f4
+			/* Module Specific Signal */
+			/* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */
+			/* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */
+			MX53_PAD_EIM_D29__GPIO3_29 0x1f4
+			MX53_PAD_EIM_EB3__GPIO2_31 0x1f4
+			/* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */
+			/* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */
+			MX53_PAD_EIM_A19__GPIO2_19 0x1f4
+			MX53_PAD_EIM_A20__GPIO2_18 0x1f4
+			MX53_PAD_EIM_A21__GPIO2_17 0x1f4
+			MX53_PAD_EIM_A22__GPIO2_16 0x1f4
+			MX53_PAD_EIM_A23__GPIO6_6 0x1f4
+			MX53_PAD_EIM_A24__GPIO5_4 0x1f4
+			MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4
+			MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4
+			MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4
+			MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4
+			/* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */
+			/* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */
+			MX53_PAD_GPIO_13__GPIO4_3 0x1f4
+			MX53_PAD_EIM_CS0__GPIO2_23 0x1f4
+			MX53_PAD_EIM_CS1__GPIO2_24 0x1f4
+			MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4
+			MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4
+			MX53_PAD_EIM_EB0__GPIO2_28 0x1f4
+			MX53_PAD_EIM_EB1__GPIO2_29 0x1f4
+			MX53_PAD_EIM_OE__GPIO2_25 0x1f4
+			MX53_PAD_EIM_LBA__GPIO2_27 0x1f4
+			MX53_PAD_EIM_RW__GPIO2_26 0x1f4
+			MX53_PAD_EIM_DA8__GPIO3_8 0x1f4
+			MX53_PAD_EIM_DA9__GPIO3_9 0x1f4
+			MX53_PAD_EIM_DA10__GPIO3_10 0x1f4
+			MX53_PAD_EIM_DA11__GPIO3_11 0x1f4
+			MX53_PAD_EIM_DA12__GPIO3_12 0x1f4
+			MX53_PAD_EIM_DA13__GPIO3_13 0x1f4
+			MX53_PAD_EIM_DA14__GPIO3_14 0x1f4
+			MX53_PAD_EIM_DA15__GPIO3_15 0x1f4
+			>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
+			MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
+			MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
+		>;
+	};
+
+	pinctrl_can_xcvr: can-xcvrgrp {
+		fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */
+	};
+
+	pinctrl_ds1339: ds1339grp {
+		fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_19__ECSPI1_RDY		0x80000000
+			MX53_PAD_EIM_EB2__ECSPI1_SS0		0x80000000
+			MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+			MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+			MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+			MX53_PAD_EIM_D19__ECSPI1_SS1		0x80000000
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			MX53_PAD_EIM_D24__GPIO3_24 0x1f0
+		>;
+	};
+
+	pinctrl_esdhc2: esdhc2grp {
+		fsl,pins = <
+			MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+			MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+			MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+			MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+			MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+			MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+			MX53_PAD_EIM_D25__GPIO3_25 0x1f0
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+		>;
+	};
+
+	pinctrl_gpio_key: gpio-keygrp {
+		fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+			MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpiogrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__GPIO3_21		0x400001e6
+			MX53_PAD_EIM_D28__GPIO3_28		0x400001e6
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_3__I2C3_SCL		0x400001e4
+			MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpiogrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_3__GPIO1_3		0x400001e6
+			MX53_PAD_GPIO_6__GPIO1_6		0x400001e6
+		>;
+	};
+
+	pinctrl_nand: nandgrp {
+		fsl,pins = <
+			MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+			MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+			MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+			MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+			MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+			MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+			MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+			MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	0xa4
+			MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	0xa4
+			MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	0xa4
+			MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	0xa4
+			MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	0xa4
+			MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	0xa4
+			MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	0xa4
+			MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	0xa4
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_1__PWM2_PWMO		0x80000000
+		>;
+	};
+
+	pinctrl_ssi1: ssi1grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+			MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+			MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+			MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+		>;
+	};
+
+	pinctrl_ssi2: ssi2grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC	0x80000000
+			MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD	0x80000000
+			MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS	0x80000000
+			MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD	0x80000000
+			MX53_PAD_EIM_D27__GPIO3_27 0x1f0
+		>;
+	};
+
+	pinctrl_stk5led: stk5ledgrp {
+		fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			MX53_PAD_PATA_RESET_B__UART1_CTS	0x1c5
+			MX53_PAD_PATA_IORDY__UART1_RTS		0x1c5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1c5
+			MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1c5
+			MX53_PAD_PATA_DIOR__UART2_RTS		0x1c5
+			MX53_PAD_PATA_INTRQ__UART2_CTS		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+			MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+			MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
+			MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1-vbusgrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotg-vbusgrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */
+			MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */
+		>;
+	};
+};
+
+&ipu {
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+&sdma {
+	fsl,sdma-ram-script-name = "sdma-imx53.bin";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	phy_type = "utmi";
+	disable-over-current;
+	vbus-supply = <&reg_usbh1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "peripheral";
+	disable-over-current;
+	vbus-supply = <&reg_usbotg_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts
index f34993a490ee..acc44010d510 100644
--- a/arch/arm/boot/dts/imx53-usbarmory.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts
@@ -67,7 +67,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user {
+		led-user {
 			label = "LED";
 			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-voipac-bsb.dts b/arch/arm/boot/dts/nxp/imx/imx53-voipac-bsb.dts
new file mode 100644
index 000000000000..ae9cc04f23eb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-voipac-bsb.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
+ */
+
+/dts-v1/;
+#include "imx53-voipac-dmm-668.dtsi"
+
+/ {
+	sound {
+		compatible = "fsl,imx53-voipac-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-voipac-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio>;
+
+		led1 {
+			label = "led-red";
+			gpios = <&gpio3 29 0>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "led-orange";
+			gpios = <&gpio2 31 0>;
+			default-state = "off";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hogbsb>;
+
+	pinctrl_hogbsb: hogbsbgrp {
+		fsl,pins = <
+			/* SD2_CD */
+			MX53_PAD_EIM_D25__GPIO3_25	0x80000000
+			/* SD2_WP */
+			MX53_PAD_EIM_A19__GPIO2_19 	0x80000000
+		>;
+	};
+
+	led_pin_gpio: ledgpiogrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D29__GPIO3_29	0x80000000
+			MX53_PAD_EIM_EB3__GPIO2_31	0x80000000
+		>;
+	};
+
+	/* Keyboard controller */
+	pinctrl_kpp_1: kpp1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_9__KPP_COL_6	0xe8
+			MX53_PAD_GPIO_4__KPP_COL_7	0xe8
+			MX53_PAD_KEY_COL2__KPP_COL_2	0xe8
+			MX53_PAD_KEY_COL3__KPP_COL_3	0xe8
+			MX53_PAD_KEY_COL4__KPP_COL_4	0xe8
+			MX53_PAD_GPIO_2__KPP_ROW_6	0xe0
+			MX53_PAD_GPIO_5__KPP_ROW_7	0xe0
+			MX53_PAD_KEY_ROW2__KPP_ROW_2	0xe0
+			MX53_PAD_KEY_ROW3__KPP_ROW_3	0xe0
+			MX53_PAD_KEY_ROW4__KPP_ROW_4	0xe0
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+			MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+			MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+			MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+		>;
+	};
+
+	pinctrl_esdhc2: esdhc2grp {
+		fsl,pins = <
+			MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+			MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+			MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+			MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+			MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+			MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_3__I2C3_SCL		0xc0000000
+			MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+		>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>; /* SSI1 */
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&clks 150>;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp_1>;
+	linux,keymap = <
+			0x0203003b	/* KEY_F1 */
+			0x0603003c	/* KEY_F2 */
+			0x0207003d	/* KEY_F3 */
+			0x0607003e	/* KEY_F4 */
+			>;
+	keypad,num-rows = <8>;
+	keypad,num-columns = <1>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-voipac-dmm-668.dtsi
new file mode 100644
index 000000000000..6dc70a92d831
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-voipac-dmm-668.dtsi
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "Voipac i.MX53 X53-DMM-668";
+	compatible = "voipac,imx53-dmm-668", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 31 0>; /* PEN */
+		enable-active-high;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* Make DA9053 regulator functional */
+			MX53_PAD_GPIO_16__GPIO7_11	0x80000000
+			/* FEC Power enable */
+			MX53_PAD_GPIO_11__GPIO4_1	0x80000000
+			/* FEC RST */
+			MX53_PAD_GPIO_12__GPIO4_2	0x80000000
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+			MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+			MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
+			MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_nand: nandgrp {
+		fsl,pins = <
+			MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+			MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+			MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+			MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+			MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+			MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+			MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+			MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
+			MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
+			MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
+			MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
+			MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
+			MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
+			MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
+			MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
+		>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
+		   <&gpio2 16 GPIO_ACTIVE_LOW>, <&gpio2 17 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: dialog@48 {
+		compatible = "dlg,da9053-aa", "dlg,da9052";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "BUCKCORE";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "BUCKPRO";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "BUCKMEM";
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1580000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: buck4 {
+				regulator-name = "BUCKPERI";
+				regulator-min-microvolt = <2370000>;
+				regulator-max-microvolt = <2630000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-name = "ldo1_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "ldo2_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "ldo3_3v3";
+				regulator-min-microvolt = <3250000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "ldo4_2v775";
+				regulator-min-microvolt = <2770000>;
+				regulator-max-microvolt = <2780000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-name = "ldo5_3v3";
+				regulator-min-microvolt = <3250000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-name = "ldo6_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-name = "ldo7_2v75";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-name = "ldo8_1v8";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-name = "ldo9_1v5";
+				regulator-min-microvolt = <1450000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: ldo10 {
+				regulator-name = "ldo10_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53.dtsi
index b7a6469d3472..93225a56896f 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx53.dtsi
@@ -275,7 +275,7 @@
 				ecspi1: spi@50010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
-					compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+					compatible = "fsl,imx53-ecspi";
 					reg = <0x50010000 0x4000>;
 					interrupts = <36>;
 					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
@@ -458,7 +458,7 @@
 				clocks = <&clks IMX5_CLK_SRTC_GATE>;
 			};
 
-			iomuxc: iomuxc@53fa8000 {
+			iomuxc: pinctrl@53fa8000 {
 				compatible = "fsl,imx53-iomuxc";
 				reg = <0x53fa8000 0x4000>;
 			};
@@ -595,10 +595,10 @@
 				#reset-cells = <1>;
 			};
 
-			clks: ccm@53fd4000{
+			clks: ccm@53fd4000 {
 				compatible = "fsl,imx53-ccm";
 				reg = <0x53fd4000 0x4000>;
-				interrupts = <0 71 0x04 0 72 0x04>;
+				interrupts = <71>, <72>;
 				#clock-cells = <1>;
 			};
 
@@ -668,7 +668,7 @@
 			};
 
 			iim: efuse@63f98000 {
-				compatible = "fsl,imx53-iim", "fsl,imx27-iim", "syscon";
+				compatible = "fsl,imx53-iim";
 				reg = <0x63f98000 0x4000>;
 				interrupts = <69>;
 				clocks = <&clks IMX5_CLK_IIM_GATE>;
@@ -701,7 +701,7 @@
 			ecspi2: spi@63fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx53-ecspi";
 				reg = <0x63fac000 0x4000>;
 				interrupts = <37>;
 				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
@@ -710,7 +710,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@63fb0000 {
+			sdma: dma-controller@63fb0000 {
 				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
@@ -775,7 +775,7 @@
 				status = "disabled";
 			};
 
-			nfc: nand@63fdb000 {
+			nfc: nand-controller@63fdb000 {
 				compatible = "fsl,imx53-nand";
 				reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
 				interrupts = <8>;
@@ -850,6 +850,9 @@
 		ocram: sram@f8000000 {
 			compatible = "mmio-sram";
 			reg = <0xf8000000 0x20000>;
+			ranges = <0 0xf8000000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX5_CLK_OCRAM>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6-logicpd-baseboard.dtsi
index d9de9b4f0c52..1e0a588b2a15 100644
--- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6-logicpd-baseboard.dtsi
@@ -6,7 +6,7 @@
 	keyboard {
 		compatible = "gpio-keys";
 
-		btn0 {
+		button-0 {
 			gpios = <&pcf8575 0 GPIO_ACTIVE_LOW>;
 			label = "btn0";
 			linux,code = <KEY_WAKEUP>;
@@ -14,7 +14,7 @@
 			wakeup-source;
 		};
 
-		btn1 {
+		button-1 {
 			gpios = <&pcf8575 1 GPIO_ACTIVE_LOW>;
 			label = "btn1";
 			linux,code = <KEY_WAKEUP>;
@@ -22,7 +22,7 @@
 			wakeup-source;
 		};
 
-		btn2 {
+		button-2 {
 			gpios = <&pcf8575 2 GPIO_ACTIVE_LOW>;
 			label = "btn2";
 			linux,code = <KEY_WAKEUP>;
@@ -30,7 +30,7 @@
 			wakeup-source;
 		};
 
-		btn3 {
+		button-3 {
 			gpios = <&pcf8575 3 GPIO_ACTIVE_LOW>;
 			label = "btn3";
 			linux,code = <KEY_WAKEUP>;
@@ -534,7 +534,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: h100-usdhc2-100mhz {
+	pinctrl_usdhc2_100mhz: h100-usdhc2-100mhzgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
 			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
@@ -546,7 +546,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: h100-usdhc2-200mhz {
+	pinctrl_usdhc2_200mhz: h100-usdhc2-200mhzgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
 			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
diff --git a/arch/arm/boot/dts/imx6-logicpd-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6-logicpd-som.dtsi
index 547fb141ec0c..547fb141ec0c 100644
--- a/arch/arm/boot/dts/imx6-logicpd-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6-logicpd-som.dtsi
diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts
index e8325fd680d9..9bb36db131c2 100644
--- a/arch/arm/boot/dts/imx6dl-alti6p.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts
@@ -22,9 +22,10 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
-	i2c2-mux {
+	i2c-mux-2 {
 		compatible = "i2c-mux";
 		i2c-parent = <&i2c2>;
 		mux-controls = <&i2c_mux>;
@@ -44,7 +45,7 @@
 		};
 	};
 
-	i2c4-mux {
+	i2c-mux-4 {
 		compatible = "i2c-mux";
 		i2c-parent = <&i2c4>;
 		mux-controls = <&i2c_mux>;
@@ -191,6 +192,13 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clock_ksz8081>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clock_ksz8081>;
+};
+
 &ecspi1 {
 	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
@@ -208,10 +216,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clock_ksz8081>;
-	clock-names = "ipg", "ahb", "ptp";
 	status = "okay";
 
 	mdio {
@@ -357,6 +361,7 @@
 	pinctrl-0 = <&pinctrl_usbh1>;
 	phy_type = "utmi";
 	dr_mode = "host";
+	over-current-active-low;
 	status = "okay";
 };
 
@@ -366,9 +371,18 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
+	over-current-active-low;
 	status = "okay";
 };
 
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
diff --git a/arch/arm/boot/dts/imx6dl-apf6dev.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-apf6dev.dts
index 3dcce3454b08..3dcce3454b08 100644
--- a/arch/arm/boot/dts/imx6dl-apf6dev.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-apf6dev.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts
new file mode 100644
index 000000000000..fc62ba2a4fcb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * support for the imx6 based aristainetos2 board
+ *
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos2.dtsi"
+
+/ {
+	model = "aristainetos2 i.MX6 Dual Lite Board 4";
+	compatible = "abb,aristainetos2-imx6dl-4", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	display0: disp0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp>;
+
+		port@0 {
+			reg = <0>;
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&ecspi1 {
+	lcd_panel: display@0 {
+		compatible = "lg,lg4573";
+		spi-max-frequency = <10000000>;
+		reg = <0>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing-480x800p57 {
+				clock-frequency = <27000027>;
+				hactive = <480>;
+				vactive = <800>;
+				hfront-porch = <10>;
+				hback-porch = <59>;
+				hsync-len = <10>;
+				vback-porch = <15>;
+				vfront-porch = <15>;
+				vsync-len = <15>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touch: touch@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 8>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_ipu_disp: ipudisp1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0xE1
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0xE1
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0xE1
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0xE1
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0xE1
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0xE1
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0xE1
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0xE1
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0xE1
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0xE1
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0xE1
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0xE1
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0xE1
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0xE1
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0xE1
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0xe1
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0xE1
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0xE1
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0xE1
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0xE1
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0xE1
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0xE1
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0xE1
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0xE1
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0xE1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts
new file mode 100644
index 000000000000..a7400d42475b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * support for the imx6 based aristainetos2 board
+ *
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos2.dtsi"
+
+/ {
+	model = "aristainetos2 i.MX6 Dual Lite Board 7";
+	compatible = "abb,aristainetos2-imx6dl-7", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	panel: panel {
+		compatible = "lg,lb070wv8";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touch: touch@4d {
+		compatible = "atmel,maxtouch";
+		reg = <0x4d>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 8>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+			lvds0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_lvds0>;
+			};
+		};
+
+		port@4 {
+			reg = <4>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts
index cc861a43eb58..9ec038f1d0ff 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts
@@ -14,7 +14,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
@@ -36,8 +36,8 @@
 		status = "okay";
 
 		display-timings {
-			480x800p60 {
-				native-mode;
+			native-mode = <&timing0>;
+			timing0: timing-480x800p60 {
 				clock-frequency = <30000000>;
 				hactive = <480>;
 				vactive = <800>;
@@ -79,6 +79,5 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts
index b6cb78870cd5..b3129832f471 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts
@@ -25,8 +25,8 @@
 		status = "okay";
 
 		display-timings {
-			800x480p60 {
-				native-mode;
+			native-mode = <&timing0>;
+			timing0: timing-800x480p60 {
 				clock-frequency = <33246000>;
 				hactive = <800>;
 				vactive = <480>;
@@ -49,7 +49,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 3000>;
+		pwms = <&pwm3 0 3000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		pinctrl-names = "default";
@@ -69,6 +69,5 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6dl-b105pv2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts
index 411aa72d344b..63cdf24eb397 100644
--- a/arch/arm/boot/dts/imx6dl-b105pv2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 //
 // Device Tree Source for General Electric B105Pv2
 //
@@ -22,7 +22,7 @@
 		compatible = "ilitek,ili251x";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/imx6dl-b105v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts
index d011127c635b..2e75d700efdb 100644
--- a/arch/arm/boot/dts/imx6dl-b105v2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 //
 // Device Tree Source for General Electric B105v2
 //
@@ -22,7 +22,7 @@
 		compatible = "ilitek,ili251x";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/imx6dl-b125pv2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts
index ca840fa84052..94625d5d5918 100644
--- a/arch/arm/boot/dts/imx6dl-b125pv2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 //
 // Device Tree Source for General Electric B125Pv2
 //
@@ -22,7 +22,7 @@
 		compatible = "eeti,exc80h60";
 		reg = <0x2a>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/imx6dl-b125v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts
index 81e5a9cb8900..b3cfa8110ade 100644
--- a/arch/arm/boot/dts/imx6dl-b125v2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 //
 // Device Tree Source for General Electric B125v2
 //
@@ -22,7 +22,7 @@
 		compatible = "eeti,exc80h60";
 		reg = <0x2a>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/imx6dl-b155v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
index c861937b30f6..7edc788bcb8f 100644
--- a/arch/arm/boot/dts/imx6dl-b155v2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 //
 // Device Tree Source for General Electric B155v2
 //
@@ -22,7 +22,7 @@
 		compatible = "eeti,exc80h84";
 		reg = <0x2a>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		touchscreen-inverted-x;
diff --git a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5pv2.dtsi
index ec5b66453156..9f1655540cb9 100644
--- a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5pv2.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 //
 // Device Tree Source for General Electric B1x5Pv2
 // patient monitor series
@@ -188,7 +188,7 @@
 	rotary-encoder-key {
 		compatible = "gpio-keys";
 
-		rotary-encoder-press {
+		rotary-encoder-event {
 			label = "rotary-encoder press";
 			gpios = <&tca6424a 0 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_ENTER>;
@@ -211,17 +211,17 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>;
 
-		alarm1 {
+		led-alarm1 {
 			label = "alarm:red";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		alarm2 {
+		led-alarm2 {
 			label = "alarm:yellow";
 			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
 		};
 
-		alarm3 {
+		led-alarm3 {
 			label = "alarm:blue";
 			gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
 		};
@@ -257,7 +257,7 @@
 		simple-audio-card,bitclock-master = <&dailink_master>;
 		simple-audio-card,frame-master = <&dailink_master>;
 		simple-audio-card,widgets = "Speaker", "Ext Spk";
-		simple-audio-card,audio-routing = "Ext Spk", "LINE";
+		simple-audio-card,routing = "Ext Spk", "LINE";
 
 		simple-audio-card,cpu {
 			sound-dai = <&ssi1>;
diff --git a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi
index f028b6a191df..590dcc0953cc 100644
--- a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 //
 // Device Tree Source for General Electric B1x5v2
 // patient monitor series
diff --git a/arch/arm/boot/dts/imx6dl-colibri-aster.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-aster.dts
index 74e8a6cd8bed..987058ab0a9b 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-aster.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-aster.dts
@@ -52,7 +52,7 @@
 		&pinctrl_weim_gpio_5
 	>;
 
-	pinctrl_gpio_aster: gpioaster {
+	pinctrl_gpio_aster: gpioastergrp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
 			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
@@ -99,11 +99,12 @@
 };
 
 &usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
+	disable-over-current;
 	status = "okay";
 };
 
 &usbotg {
+	disable-over-current;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-eval-v3.dts
index 7272edd85a49..f50a26dd34c0 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-eval-v3.dts
@@ -111,11 +111,12 @@
 };
 
 &usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
+	disable-over-current;
 	status = "okay";
 };
 
 &usbotg {
+	disable-over-current;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-iris-v2.dts
index 3a6d3889760d..3a6d3889760d 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-iris-v2.dts
diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-iris.dts
index cf77d894f6d7..4303c88bb2a9 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-iris.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-iris.dts
@@ -138,11 +138,12 @@
 };
 
 &usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
+	disable-over-current;
 	status = "okay";
 };
 
 &usbotg {
+	disable-over-current;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-aster.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-aster.dts
new file mode 100644
index 000000000000..44c78c07f431
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-aster.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-aster.dts"
+#include "imx6qdl-colibri-v1.2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Aster Board";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-eval-v3.dts
new file mode 100644
index 000000000000..93fd0af53a3c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-eval-v3.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-eval-v3.dts"
+#include "imx6qdl-colibri-v1.2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Evaluation Board V3";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris-v2.dts
new file mode 100644
index 000000000000..92d41fc9a13f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris-v2.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-iris-v2.dts"
+#include "imx6qdl-colibri-v1.2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Iris V2 Board";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris.dts
new file mode 100644
index 000000000000..c8957948c887
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-iris.dts"
+#include "imx6qdl-colibri-v1.2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Iris Board";
+};
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i-emmc-som-v15.dts
index 2b2fc360b865..2b2fc360b865 100644
--- a/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i-emmc-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i-som-v15.dts
index e09c565d1d1f..e09c565d1d1f 100644
--- a/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i.dts
index 2b1b3e193f53..2b1b3e193f53 100644
--- a/arch/arm/boot/dts/imx6dl-cubox-i.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i.dts
diff --git a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-dfi-fs700-m60.dts
index cece4aafdad8..cece4aafdad8 100644
--- a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-dfi-fs700-m60.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-pdk2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-pdk2.dts
new file mode 100644
index 000000000000..38235925257a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-pdk2.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX6 variant:
+ * DHCM-iMX6DL-C080-R102-F0819-E-SD-RTC-T-HS-I-01D2
+ * DHCOM PCB number: 493-400 or newer
+ * PDK2 PCB number: 516-400 or newer
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-dhcom-som.dtsi"
+#include "imx6qdl-dhcom-pdk2.dtsi"
+
+/ {
+	model = "DH electronics i.MX6DL DHCOM on Premium Developer Kit (2)";
+	compatible = "dh,imx6dl-dhcom-pdk2", "dh,imx6dl-dhcom-som",
+		     "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-dhcom-picoitx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-picoitx.dts
index 038bb0025556..775caf8208c5 100644
--- a/arch/arm/boot/dts/imx6dl-dhcom-picoitx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-picoitx.dts
@@ -3,7 +3,7 @@
  * Copyright (C) 2021 DH electronics GmbH
  *
  * DHCOM iMX6 variant:
- * DHCM-iMX6DL-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
+ * DHCM-iMX6DL-C080-R102-F0819-E-SD-RTC-T-HS-I-01D2
  * DHCOM PCB number: 493-300 or newer
  * PicoITX PCB number: 487-600 or newer
  */
diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-eckelmann-ci4x10.dts
index 864dc5018451..5ed55f74b398 100644
--- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-eckelmann-ci4x10.dts
@@ -28,6 +28,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_usb_h1_vbus: regulator-usb-h1-vbus {
@@ -64,6 +65,13 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&rmii_clk>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&rmii_clk>;
+};
+
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
@@ -131,7 +139,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
-	pinctrl_hog: hog {
+	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x00000018 /* buzzer */
 			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x00000018 /* OUT_1 */
@@ -297,11 +305,6 @@
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
 	phy-handle = <&phy>;
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&rmii_clk>,
-		 <&clks IMX6QDL_CLK_ENET_REF>;
-	clock-names = "ipg", "ahb", "ptp", "enet_out";
 	status = "okay";
 
 	mdio {
diff --git a/arch/arm/boot/dts/imx6dl-emcon-avari.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-emcon-avari.dts
index 407ad8d43c84..77d7600b2675 100644
--- a/arch/arm/boot/dts/imx6dl-emcon-avari.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-emcon-avari.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 or MIT)
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 //
 // Copyright (C) 2018 emtrion GmbH
 //
diff --git a/arch/arm/boot/dts/imx6dl-gw51xx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw51xx.dts
index 9956d12a1245..9956d12a1245 100644
--- a/arch/arm/boot/dts/imx6dl-gw51xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw51xx.dts
diff --git a/arch/arm/boot/dts/imx6dl-gw52xx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw52xx.dts
index 9ea23dd54f3c..9ea23dd54f3c 100644
--- a/arch/arm/boot/dts/imx6dl-gw52xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw52xx.dts
diff --git a/arch/arm/boot/dts/imx6dl-gw53xx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw53xx.dts
index 182e8194c249..182e8194c249 100644
--- a/arch/arm/boot/dts/imx6dl-gw53xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw53xx.dts
diff --git a/arch/arm/boot/dts/imx6dl-gw54xx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw54xx.dts
index a106c4e3e329..a106c4e3e329 100644
--- a/arch/arm/boot/dts/imx6dl-gw54xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw54xx.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts
new file mode 100644
index 000000000000..50dd3df9dd04
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw551x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW551X";
+	compatible = "gw,imx6dl-gw551x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw552x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw552x.dts
index 4864a36f9b36..4864a36f9b36 100644
--- a/arch/arm/boot/dts/imx6dl-gw552x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw552x.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts
new file mode 100644
index 000000000000..8ca5b6b8da07
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2016 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw553x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW553X";
+	compatible = "gw,imx6dl-gw553x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts
new file mode 100644
index 000000000000..b94455406a57
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw560x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW560X";
+	compatible = "gw,imx6dl-gw560x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts
new file mode 100644
index 000000000000..dd978105b42f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5903.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Duallite/Solo GW5903";
+	compatible = "gw,imx6dl-gw5903", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts
new file mode 100644
index 000000000000..172dad423639
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5904.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5904";
+	compatible = "gw,imx6dl-gw5904", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5907.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5907.dts
index 3fa2822beffc..3fa2822beffc 100644
--- a/arch/arm/boot/dts/imx6dl-gw5907.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5907.dts
diff --git a/arch/arm/boot/dts/imx6dl-gw5910.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5910.dts
index 0d5e7e5da536..0d5e7e5da536 100644
--- a/arch/arm/boot/dts/imx6dl-gw5910.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5910.dts
diff --git a/arch/arm/boot/dts/imx6dl-gw5912.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5912.dts
index 5260e0142d63..5260e0142d63 100644
--- a/arch/arm/boot/dts/imx6dl-gw5912.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5912.dts
diff --git a/arch/arm/boot/dts/imx6dl-gw5913.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5913.dts
index b74e533c8e67..b74e533c8e67 100644
--- a/arch/arm/boot/dts/imx6dl-gw5913.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5913.dts
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard-emmc-som-v15.dts
index a63f742f20d9..a63f742f20d9 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard-emmc-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard-som-v15.dts
index 66a06cf3cdf3..66a06cf3cdf3 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard.dts
index cbd02eb486e1..cbd02eb486e1 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard.dts
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2-emmc-som-v15.dts
index 80313c13bcdb..80313c13bcdb 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2-emmc-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2-som-v15.dts
index e61ef1156f8b..e61ef1156f8b 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2.dts
index b12cd87f3f94..b12cd87f3f94 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2.dts
diff --git a/arch/arm/boot/dts/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-icore-mipi.dts
index d8f3821a0ffd..d8f3821a0ffd 100644
--- a/arch/arm/boot/dts/imx6dl-icore-mipi.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-icore-mipi.dts
diff --git a/arch/arm/boot/dts/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-icore-rqs.dts
index 73d710d34b9d..73d710d34b9d 100644
--- a/arch/arm/boot/dts/imx6dl-icore-rqs.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-icore-rqs.dts
diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-icore.dts
index 80fa60607ab1..80fa60607ab1 100644
--- a/arch/arm/boot/dts/imx6dl-icore.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-icore.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts
new file mode 100644
index 000000000000..6a0c53f23a15
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+#include "imx6qdl-kontron-samx6i-ads2.dtsi"
+
+/ {
+	model = "Kontron SMARC-sAMX6i Dual-Lite/Solo on SMARC Eval 2.0 carrier";
+	compatible = "kontron,imx6dl-samx6i-ads2", "kontron,imx6dl-samx6i", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi
index a864fdbd5f16..5a9b819d7ee8 100644
--- a/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi
@@ -7,6 +7,6 @@
 #include "imx6qdl-kontron-samx6i.dtsi"
 
 / {
-	model = "Kontron SMARC sAMX6i Dual-Lite/Solo";
+	model = "Kontron SMARC-sAMX6i Dual-Lite/Solo";
 	compatible = "kontron,imx6dl-samx6i", "fsl,imx6dl";
 };
diff --git a/arch/arm/boot/dts/imx6dl-lanmcu.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts
index 6b6e6fcdea9c..7c62db91173b 100644
--- a/arch/arm/boot/dts/imx6dl-lanmcu.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts
@@ -21,6 +21,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	backlight: backlight {
@@ -109,14 +110,17 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clock_ksz8081>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clock_ksz8081>;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clock_ksz8081>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rgmii_phy>;
 	status = "okay";
 
@@ -253,9 +257,18 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
+	over-current-active-low;
 	status = "okay";
 };
 
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dts
index 028951955bde..ec5a9bf40677 100644
--- a/arch/arm/boot/dts/imx6dl-mamoj.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dts
@@ -21,7 +21,7 @@
 
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */
+		pwms = <&pwm3 0 25000 0>; /* 25000ns -> 40kHz */
 		brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>;
 		default-brightness-level = <7>;
 	};
@@ -303,7 +303,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
@@ -396,7 +395,7 @@
 		>;
 	};
 
-	pinctrl_ipu1_lcdif: pinctrlipu1lcdif { /* parallel port 24-bit */
+	pinctrl_ipu1_lcdif: pinctrlipu1lcdifgrp { /* parallel port 24-bit */
 		fsl,pins = <
 			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 /* VDOUT_PCLK */
 			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
diff --git a/arch/arm/boot/dts/imx6dl-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-mba6.dtsi
index b749b424bbd6..b749b424bbd6 100644
--- a/arch/arm/boot/dts/imx6dl-mba6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-mba6.dtsi
diff --git a/arch/arm/boot/dts/imx6dl-mba6a.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-mba6a.dts
index df0a96b28af0..df0a96b28af0 100644
--- a/arch/arm/boot/dts/imx6dl-mba6a.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-mba6a.dts
diff --git a/arch/arm/boot/dts/imx6dl-mba6b.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-mba6b.dts
index 610b19d2db0f..610b19d2db0f 100644
--- a/arch/arm/boot/dts/imx6dl-mba6b.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-mba6b.dts
diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-nit6xlite.dts
index 61fa30991d67..61fa30991d67 100644
--- a/arch/arm/boot/dts/imx6dl-nit6xlite.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-nit6xlite.dts
diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-nitrogen6x.dts
index ef58d3b0ea0d..ef58d3b0ea0d 100644
--- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-nitrogen6x.dts
diff --git a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts
index d906a7f05aaa..d906a7f05aaa 100644
--- a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts
diff --git a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-pbab01.dts
index 0a07cc6f815e..0a07cc6f815e 100644
--- a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-pbab01.dts
diff --git a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-pfla02.dtsi
index 6f8aaf524425..6f8aaf524425 100644
--- a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-pfla02.dtsi
diff --git a/arch/arm/boot/dts/imx6dl-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-dwarf.dts
index d85b15a8c127..d85b15a8c127 100644
--- a/arch/arm/boot/dts/imx6dl-pico-dwarf.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-dwarf.dts
diff --git a/arch/arm/boot/dts/imx6dl-pico-hobbit.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-hobbit.dts
index 08fedcbcc91b..08fedcbcc91b 100644
--- a/arch/arm/boot/dts/imx6dl-pico-hobbit.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-hobbit.dts
diff --git a/arch/arm/boot/dts/imx6dl-pico-nymph.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-nymph.dts
index 32ccfc5d41ce..32ccfc5d41ce 100644
--- a/arch/arm/boot/dts/imx6dl-pico-nymph.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-nymph.dts
diff --git a/arch/arm/boot/dts/imx6dl-pico-pi.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-pi.dts
index 4590e8ad9a91..4590e8ad9a91 100644
--- a/arch/arm/boot/dts/imx6dl-pico-pi.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-pi.dts
diff --git a/arch/arm/boot/dts/imx6dl-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6dl-pinfunc.h
index 9d88d09f9bf6..9d88d09f9bf6 100644
--- a/arch/arm/boot/dts/imx6dl-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-pinfunc.h
diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-plybas.dts
index c52e6caf3996..84f34da06267 100644
--- a/arch/arm/boot/dts/imx6dl-plybas.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-plybas.dts
@@ -75,6 +75,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_5v0: regulator-5v0 {
@@ -99,6 +100,13 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
 &ecspi1 {
 	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
@@ -116,10 +124,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rgmii_phy>;
 	status = "okay";
 
@@ -231,7 +235,7 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
-	disable-over-current;
+	over-current-active-low;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts
index 522660c912a0..dfa8110b1d97 100644
--- a/arch/arm/boot/dts/imx6dl-plym2m.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts
@@ -84,6 +84,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_3v3: regulator-3v3 {
@@ -112,18 +113,42 @@
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 
 		touch-thermal0 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp0>;
+
+			trips {
+				alert {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 
 		touch-thermal1 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp1>;
+
+			trips {
+				alert {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 	};
 
@@ -173,6 +198,13 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
 &ecspi1 {
 	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
@@ -254,10 +286,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rgmii_phy>;
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts
index a35a1c66e770..2160b7177835 100644
--- a/arch/arm/boot/dts/imx6dl-prtmvt.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts
@@ -51,98 +51,98 @@
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 		autorepeat;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		f1 {
+		key-f1 {
 			label = "GPIO Key F1";
 			linux,code = <KEY_F1>;
 			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
 		};
 
-		f2 {
+		key-f2 {
 			label = "GPIO Key F2";
 			linux,code = <KEY_F2>;
 			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
 		};
 
-		f3 {
+		key-f3 {
 			label = "GPIO Key F3";
 			linux,code = <KEY_F3>;
 			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
 		};
 
-		f4 {
+		key-f4 {
 			label = "GPIO Key F4";
 			linux,code = <KEY_F4>;
 			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
 		};
 
-		f5 {
+		key-f5 {
 			label = "GPIO Key F5";
 			linux,code = <KEY_F5>;
 			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
 		};
 
-		cycle {
+		key-cycle {
 			label = "GPIO Key CYCLE";
 			linux,code = <KEY_CYCLEWINDOWS>;
 			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
 		};
 
-		esc {
+		key-esc {
 			label = "GPIO Key ESC";
 			linux,code = <KEY_ESC>;
 			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
 		};
 
-		up {
+		key-up {
 			label = "GPIO Key UP";
 			linux,code = <KEY_UP>;
 			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
 		};
 
-		down {
+		key-down {
 			label = "GPIO Key DOWN";
 			linux,code = <KEY_DOWN>;
 			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
 		};
 
-		ok {
+		key-ok {
 			label = "GPIO Key OK";
 			linux,code = <KEY_OK>;
 			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
 		};
 
-		f6 {
+		key-f6 {
 			label = "GPIO Key F6";
 			linux,code = <KEY_F6>;
 			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
 		};
 
-		f7 {
+		key-f7 {
 			label = "GPIO Key F7";
 			linux,code = <KEY_F7>;
 			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
 		};
 
-		f8 {
+		key-f8 {
 			label = "GPIO Key F8";
 			linux,code = <KEY_F8>;
 			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
 		};
 
-		f9 {
+		key-f9 {
 			label = "GPIO Key F9";
 			linux,code = <KEY_F9>;
 			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
 		};
 
-		f10 {
+		key-f10 {
 			label = "GPIO Key F10";
 			linux,code = <KEY_F10>;
 			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
@@ -193,6 +193,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_1v8: regulator-1v8 {
@@ -293,8 +294,10 @@
 };
 
 &clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>;
 };
 
 &ecspi1 {
@@ -314,10 +317,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rmii_phy>;
 	status = "okay";
 
@@ -558,9 +557,9 @@
 
 &usbh1 {
 	vbus-supply = <&reg_h1_vbus>;
-	pinctrl-names = "default";
 	phy_type = "utmi";
 	dr_mode = "host";
+	disable-over-current;
 	status = "okay";
 };
 
@@ -570,10 +569,18 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
-	disable-over-current;
+	over-current-active-low;
 	status = "okay";
 };
 
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -765,7 +772,7 @@
 		>;
 	};
 
-	pinctrl_pca9539: pca9539 {
+	pinctrl_pca9539: pca9539grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_19__GPIO4_IO05			0x1b0b0
 		>;
diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtrvt.dts
index 56bb1ca56a2d..e543c4f2bc94 100644
--- a/arch/arm/boot/dts/imx6dl-prtrvt.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtrvt.dts
@@ -124,12 +124,16 @@
 	status = "disabled";
 };
 
+&usbotg {
+	disable-over-current;
+};
+
 &vpu {
 	status = "disabled";
 };
 
 &iomuxc {
-	pinctrl_can1phy: can1phy {
+	pinctrl_can1phy: can1phygrp {
 		fsl,pins = <
 			/* CAN1_SR */
 			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts
index 0a0b7acddfb2..29dc6875ab66 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts
@@ -24,7 +24,7 @@
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 500000 0>;
 		brightness-levels = <0 20 81 248 1000>;
-		default-brightness-level = <20>;
+		default-brightness-level = <65>;
 		num-interpolated-steps = <21>;
 		power-supply = <&reg_bl_12v0>;
 	};
@@ -62,91 +62,91 @@
 		compatible = "gpio-keys";
 		autorepeat;
 
-		esc {
+		key-esc {
 			label = "GPIO Key ESC";
 			linux,code = <KEY_ESC>;
 			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
 		};
 
-		up {
+		key-up {
 			label = "GPIO Key UP";
 			linux,code = <KEY_UP>;
 			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
 		};
 
-		down {
+		key-down {
 			label = "GPIO Key DOWN";
 			linux,code = <KEY_DOWN>;
 			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
 		};
 
-		enter {
+		key-enter {
 			label = "GPIO Key Enter";
 			linux,code = <KEY_ENTER>;
 			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
 		};
 
-		cycle {
+		key-cycle {
 			label = "GPIO Key CYCLE";
 			linux,code = <KEY_CYCLEWINDOWS>;
 			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
 		};
 
-		f1 {
+		key-f1 {
 			label = "GPIO Key F1";
 			linux,code = <KEY_F1>;
 			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
 		};
 
-		f2 {
+		key-f2 {
 			label = "GPIO Key F2";
 			linux,code = <KEY_F2>;
 			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
 		};
 
-		f3 {
+		key-f3 {
 			label = "GPIO Key F3";
 			linux,code = <KEY_F3>;
 			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
 		};
 
-		f4 {
+		key-f4 {
 			label = "GPIO Key F4";
 			linux,code = <KEY_F4>;
 			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
 		};
 
-		f5 {
+		key-f5 {
 			label = "GPIO Key F5";
 			linux,code = <KEY_F5>;
 			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
 		};
 
-		f6 {
+		key-f6 {
 			label = "GPIO Key F6";
 			linux,code = <KEY_F6>;
 			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
 		};
 
-		f7 {
+		key-f7 {
 			label = "GPIO Key F7";
 			linux,code = <KEY_F7>;
 			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
 		};
 
-		f8 {
+		key-f8 {
 			label = "GPIO Key F8";
 			linux,code = <KEY_F8>;
 			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
 		};
 
-		f9 {
+		key-f9 {
 			label = "GPIO Key F9";
 			linux,code = <KEY_F9>;
 			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
 		};
 
-		f10 {
+		key-f10 {
 			label = "GPIO Key F10";
 			linux,code = <KEY_F10>;
 			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
@@ -246,18 +246,42 @@
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 
 		touch-thermal0 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 
 		touch-thermal1 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp1>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 	};
 
@@ -267,8 +291,6 @@
                               <&adc_ts 5>;
 		io-channel-names = "y", "z1", "z2", "x";
 		touchscreen-min-pressure = <64687>;
-		touchscreen-inverted-x;
-		touchscreen-inverted-y;
 		touchscreen-x-plate-ohms = <300>;
 		touchscreen-y-plate-ohms = <800>;
 	};
@@ -485,7 +507,7 @@
 		>;
 	};
 
-	pinctrl_can1phy: can1phy {
+	pinctrl_can1phy: can1phygrp {
 		fsl,pins = <
 			/* CAN1_SR */
 			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x13070
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi
new file mode 100644
index 000000000000..7a3b96315eaf
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Device Tree Source for i.MX6DL based congatec QMX6
+// System on Module
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+// Copyright 2016 congatec AG
+
+#include "imx6dl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	memory@10000000 {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_3p3v: 3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c2>;
+
+		i2c5: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c6: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+
+	mux-ssi1 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT6) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT6) |
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT6)
+		>;
+	};
+
+	mux-aud6 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT6>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&clks {
+	clocks = <&rtc_sqw>;
+	clock-names = "ckil";
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf032b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0000000 0x100000>;
+		};
+
+		partition@100000 {
+			label = "user";
+			reg = <0x0100000 0x2fc000>;
+		};
+
+		partition@3fc000 {
+			label = "reserved";
+			reg = <0x03fc000 0x4000>;
+			read-only;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet &pinctrl_phy_reset>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	fsl,magic-packet;
+	phy-handle = <&phy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@6 {
+			reg = <6>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+
+		rtc_sqw: clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&i2c6 {
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/*
+			 * keep VGEN3, VGEN4 and VGEN5 enabled in order to
+			 * maintain backward compatibility with hw-rev. A.0
+			 */
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			/* supply voltage for eMMC */
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&gpio1 20 0>;
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&reg_arm {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1c_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	/* Connected to USB-Hub SMSC USB2514, provides P0, P2, P3, P4 on Qseven connector */
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+};
+
+&usdhc2 {
+	/* MicroSD card slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc3 {
+	/* eMMC module */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	bus-width = <8>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x110b0 /* Q7[67] HDA_SDO */
+			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x30b0 /* Q7[59] HDA_SYNC */
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x30b0 /* Q7[65] HDA_SDI */
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x30b0 /* Q7[63] HDA_BITCLK */
+		>;
+	};
+
+	/* PHY is on System on Module, Q7[3-15] have Ethernet lines */
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000 /* PCIE_WAKE_B */
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x80000000 /* I2C multiplexer */
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x80000000 /* SD4_CD# */
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07		0x80000000 /* SD4_WP */
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x80000000 /* Camera MCLK */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1 /* Q7[66] I2C_CLK */
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1 /* Q7[68] I2C_DAT */
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x1b0b0 /* Q7[66] I2C_CLK */
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b0 /* Q7[68] I2C_DAT */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1 /* Q7[152] SDVO_CTRL_CLK */
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1 /* Q7[150] SDVO_CTRL_DAT */
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x1b0b0 /* Q7[152] SDVO_CTRL_CLK */
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x1b0b0 /* Q7[150] SDVO_CTRL_DAT */
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1 /* Q7[60] SMB_CLK */
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1 /* Q7[62] SMB_DAT */
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x1b0b0 /* Q7[60] SMB_CLK */
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0 /* Q7[62] SMB_DAT */
+		>;
+	};
+
+	pinctrl_phy_reset: phy-resetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0 /* RGMII Phy Reset */
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1 /* Q7[123] LVDS_BLT_CTRL */
+		>;
+	};
+
+	pinctrl_q7_backlight_enable: q7-backlight-enablegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0 /* Q7[112] LVDS_BLEN */
+		>;
+	};
+
+	pinctrl_q7_gpio0: q7-gpio0grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0 /* Q7[185] GPIO0 */
+		>;
+	};
+
+	pinctrl_q7_gpio1: q7-gpio1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0 /* Q7[186] GPIO1 */
+		>;
+	};
+
+	pinctrl_q7_gpio2: q7-gpio2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b0 /* Q7[187] GPIO2 */
+		>;
+	};
+
+	pinctrl_q7_gpio3: q7-gpio3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x1b0b0 /* Q7[188] GPIO3 */
+		>;
+	};
+
+	pinctrl_q7_gpio4: q7-gpio4grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /* Q7[189] GPIO4 */
+		>;
+	};
+
+	pinctrl_q7_gpio5: q7-gpio5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0 /* Q7[190] GPIO5 */
+		>;
+	};
+
+	pinctrl_q7_gpio6: q7-gpio6grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b0 /* Q7[191] GPIO6 */
+		>;
+	};
+
+	pinctrl_q7_gpio7: q7-gpio7grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* Q7[192] GPIO7 */
+		>;
+	};
+
+	pinctrl_q7_hda_reset: q7-hda-resetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0 /* Q7[61] HDA_RST_N */
+		>;
+	};
+
+	pinctrl_q7_lcd_power: lcd-powergrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0 /* Q7[111] LVDS_PPEN */
+		>;
+	};
+
+	pinctrl_q7_sdio_power: q7-sdio-powergrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b0 /* Q7[47] SDIO_PWR# */
+		>;
+	};
+
+	pinctrl_q7_sleep_button: q7-sleep-buttongrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0 /* Q7[21] SLP_BTN# */
+		>;
+	};
+
+	pinctrl_q7_spi_cs1: spi-cs1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b0 /* Q7[202] SPI_CS1# */
+		>;
+	};
+
+	/* SPI1 bus does not leave System on Module */
+	pinctrl_spi1: spi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
+		>;
+	};
+
+	/* Debug connector on Q7 module */
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1 /* Q7[177] UART0_RX */
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1 /* Q7[171] UART0_TX */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059 /* Q7[92] USB_ID */
+		>;
+	};
+
+	/* µSD card slot on Q7 module */
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0 /* SD2_CD */
+		>;
+	};
+
+	/* eMMC module on Q7 module */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059 /* Q7[45] SDIO_CMD */
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x17059 /* Q7[42] SDIO_CLK */
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059 /* Q7[48] SDIO_DAT1 */
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059 /* Q7[49] SDIO_DAT0 */
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059 /* Q7[50] SDIO_DAT3 */
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059 /* Q7[51] SDIO_DAT2 */
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0 /* Watchdog output signal */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-rex-basic.dts
index b72f8ea1e6f6..b72f8ea1e6f6 100644
--- a/arch/arm/boot/dts/imx6dl-rex-basic.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-rex-basic.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts
new file mode 100644
index 000000000000..55b7e91d2ac0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts
@@ -0,0 +1,594 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2014 Iain Paton <ipaton0@gmail.com>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "RIoTboard i.MX6S";
+	compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6-riotboard-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+			mux-int-port = <1>;
+			mux-ext-port = <3>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8035 PHY */
+		rgmii_phy: ethernet-phy@4 {
+			reg = <4>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <1000>;
+			qca,smarteee-tw-us-1g = <24>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "SD2_WP", "", "SD2_CD", "I2C3_SCL",
+			"I2C3_SDA", "I2C4_SCL",
+		"I2C4_SDA", "", "", "", "", "", "", "",
+		"", "PWM3", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "USB_OTG_VBUS", "",
+		"UART3_TXD", "UART3_RXD", "", "", "EIM_D28", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+		"UART5_TXD", "UART5_RXD", "", "", "", "", "", "",
+		"GPIO4_16", "GPIO4_17", "GPIO4_18", "GPIO4_19", "",
+			"CSPI3_CLK", "CSPI3_MOSI", "CSPI3_MISO",
+		"CSPI3_CS0", "CSPI3_CS1", "GPIO4_26", "GPIO4_27",
+			"CSPI3_RDY", "PWM1", "PWM2", "GPIO4_31";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "EIM_A25", "", "", "GPIO5_05", "GPIO5_06",
+			"GPIO5_07",
+		"GPIO5_08", "CSPI2_CS1", "CSPI2_MOSI", "CSPI2_MISO",
+			"CSPI2_CS0", "CSPI2_CLK", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"SD3_CD", "SD3_WP", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <16 8>;
+		fsl,pmic-stby-poweroff;
+
+		regulators {
+			reg_vddcore: sw1ab {				/* VDDARM_IN */
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			reg_vddsoc: sw1c {				/* VDDSOC_IN */
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			reg_gen_3v3: sw2 {				/* VDDHIGH_IN */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_1v5a: sw3a {				/* NVCC_DRAM, NVCC_RGMII */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_1v5b: sw3b {				/* NVCC_DRAM, NVCC_RGMII */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_vtt: sw4 {				/* MIPI conn */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_5v_600mA: swbst {				/* not used */
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			reg_snvs_3v: vsnvs {				/* VDD_SNVS_IN */
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {				/* VREF_DDR */
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vgen1_1v5: vgen1 {				/* not used */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen2_1v2_eth: vgen2 {			/* pcie ? */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			reg_vgen3_2v8: vgen3 {				/* not used */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+			reg_vgen4_1v8: vgen4 {				/* NVCC_SD3 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen5_2v5_sgtl: vgen5 {			/* Pwr LED & 5V0_delayed enable */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen6_3v3: vgen6 {				/* #V#_DELAYED enable, MIPI */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clocks = <&clks 116>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* CAM_MCLK */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x000b1		/* CS0 */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x000b1		/* CS1 */
+			MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1		/* CS0 */
+			MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1		/* CS0 */
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x000b1		/* CS1 */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1		/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030		/* AR8035 pin strapping: IO voltage: pull up */
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030		/* AR8035 pin strapping: PHYADDR#0: pull down */
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030		/* AR8035 pin strapping: PHYADDR#1: pull down */
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030		/* AR8035 pin strapping: MODE#1: pull up */
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030		/* AR8035 pin strapping: MODE#3: pull up */
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8	/* GPIO16 -> AR8035 25MHz */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0		/* AR8035 interrupt */
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__I2C4_SCL             0x4001b8b1
+			MX6QDL_PAD_GPIO_8__I2C4_SDA             0x4001b8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* user led0 */
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* user led1 */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* SD2 CD */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* SD2 WP */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0	/* SD3 CD */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1f0b0	/* SD3 WP */
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x17059	/* SD4 RST (eMMC) */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-sabreauto.dts
index ff3283c83a39..ff3283c83a39 100644
--- a/arch/arm/boot/dts/imx6dl-sabreauto.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-sabreauto.dts
diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-sabrelite.dts
index 33040761b253..33040761b253 100644
--- a/arch/arm/boot/dts/imx6dl-sabrelite.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-sabrelite.dts
diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-sabresd.dts
index cd6bbf22a16f..cd6bbf22a16f 100644
--- a/arch/arm/boot/dts/imx6dl-sabresd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-sabresd.dts
diff --git a/arch/arm/boot/dts/imx6dl-savageboard.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-savageboard.dts
index b95469c520a4..b95469c520a4 100644
--- a/arch/arm/boot/dts/imx6dl-savageboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-savageboard.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts
new file mode 100644
index 000000000000..7de8d5f26518
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts
@@ -0,0 +1,533 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Sielaff i.MX6 Solo";
+	compatible = "sielaff,imx6dl-board", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight: pwm-backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm3 0 50000 0>;
+		brightness-levels = <0 0 64 88 112 136 184 232 255>;
+		default-brightness-level = <4>;
+		enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_backlight>;
+	};
+
+	cec {
+		compatible = "cec-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hdmi_cec>;
+		cec-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		hdmi-phandle = <&hdmi>;
+	};
+
+	enet_ref: clock-enet-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet-ref";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-0 {
+			gpios = <&gpio2 16 0>;
+			debounce-interval = <10>;
+			linux,code = <1>;
+		};
+
+		key-1 {
+			gpios = <&gpio3 27 0>;
+			debounce-interval = <10>;
+			linux,code = <2>;
+		};
+
+		key-2 {
+			gpios = <&gpio5 4 0>;
+			debounce-interval = <10>;
+			linux,code = <3>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-debug {
+			label = "debug-led";
+			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+		device_type = "memory";
+	};
+
+	osc_eth_phy: clock-osc-eth-phy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "osc-eth-phy";
+	};
+
+	panel {
+		compatible = "lg,lb070wv8";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in_lvds: endpoint {
+				remote-endpoint = <&lvds_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_backlight>;
+		enable-active-high;
+		gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		regulator-name = "backlight";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usbotg_vbus>;
+		enable-active-high;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&fec {
+	/*
+	 * Set PTP clock to external instead of internal reference, as the
+	 * REF_CLK from the PHY is fed back into the i.MX6 and the GPR
+	 * register needs to be set accordingly (see mach-imx6q.c).
+	 */
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&enet_ref>,
+		 <&clks IMX6QDL_CLK_ENET_REF>;
+	clock-names = "ipg", "ahb", "ptp", "enet_out";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-connection-type = "rmii";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			reg = <1>;
+			clocks = <&osc_eth_phy>;
+			clock-names = "rmii-ref";
+			micrel,led-mode = <1>;
+			reset-assert-us = <500>;
+			reset-deassert-us = <100>;
+			reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "key-out", "key-in",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"lan9500a-rst", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c4>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@55 {
+		compatible = "sitronix,st1633";
+		reg = <0x55>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpio5>;
+		gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+
+	touchscreen@5d {
+		compatible = "goodix,gt928";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio5>;
+		irq-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds_out: endpoint {
+				remote-endpoint = <&panel_in_lvds>;
+			};
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	disable-over-current;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usb1@1 {
+		compatible = "usb4b4,6570";
+		reg = <1>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+				  <&clks IMX6QDL_CLK_CKO2_SEL>;
+		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>,
+					 <&clks IMX6QDL_CLK_OSC>;
+		assigned-clock-rates = <12000000 0>;
+	};
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "host";
+	over-current-active-low;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3v3>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RD0__GPIO6_IO25	0x1b0b0	/* PMIC_IRQ */
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x1b0b0
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14		0x1b0b0
+			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15		0x1b0b0
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08		0x1b0b0
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x100b1
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b080
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27		0x1b080
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b080
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x1b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001f8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__I2C4_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_8__I2C4_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_backlight: regbacklightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_usbotg_vbus: regusbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b1
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b0
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__USB_H1_OC		0x1b0b1
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x100b1
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt2.dts
index b12b5aabe70a..b12b5aabe70a 100644
--- a/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt2.dts
diff --git a/arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt6.dts
index 5dcc433fe2af..5dcc433fe2af 100644
--- a/arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt6.dts
diff --git a/arch/arm/boot/dts/imx6dl-solidsense.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-solidsense.dts
index 2a3699adbed0..2a3699adbed0 100644
--- a/arch/arm/boot/dts/imx6dl-solidsense.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-solidsense.dts
diff --git a/arch/arm/boot/dts/imx6dl-tqma6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-tqma6a.dtsi
index e891ef9b0091..e891ef9b0091 100644
--- a/arch/arm/boot/dts/imx6dl-tqma6a.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tqma6a.dtsi
diff --git a/arch/arm/boot/dts/imx6dl-tqma6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-tqma6b.dtsi
index 38cd8501a886..38cd8501a886 100644
--- a/arch/arm/boot/dts/imx6dl-tqma6b.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tqma6b.dtsi
diff --git a/arch/arm/boot/dts/imx6dl-ts4900.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-ts4900.dts
index 3d60cc725d9e..3d60cc725d9e 100644
--- a/arch/arm/boot/dts/imx6dl-ts4900.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-ts4900.dts
diff --git a/arch/arm/boot/dts/imx6dl-ts7970.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-ts7970.dts
index 5da6feba2e66..5da6feba2e66 100644
--- a/arch/arm/boot/dts/imx6dl-ts7970.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-ts7970.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts
new file mode 100644
index 000000000000..136ae7841878
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
+
+&backlight {
+	pwms = <&pwm2 0 500000 0>;
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&lcd_panel {
+	compatible = "edt,etm0700g0edh6";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts
new file mode 100644
index 000000000000..e1b525ed292a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6s-8034.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6S-8034 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts
new file mode 100644
index 000000000000..9a6a5cda9a3b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6S-8034 Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	cpus {
+		/delete-node/ cpu@1;
+	};
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&pinctrl_usdhc1 {
+	fsl,pins = <
+		MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1
+		MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1
+		MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1
+		MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1
+		MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1
+		MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1
+		MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */
+	>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts
new file mode 100644
index 000000000000..0e8f4c3f3760
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6s-8035.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8035 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts
new file mode 100644
index 000000000000..9958e8701c98
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6S-8035 Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	cpus {
+		/delete-node/ cpu@1;
+	};
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts
new file mode 100644
index 000000000000..d9bfd340efb2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-801x Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts
new file mode 100644
index 000000000000..8243f0d6d387
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6u-8033.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8033 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts
new file mode 100644
index 000000000000..2d031403ab19
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8033 Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts
new file mode 100644
index 000000000000..684a2583db75
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6u-801x.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8030/-8010/-8012 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts
new file mode 100644
index 000000000000..7fdc794615f2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-811x Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts
new file mode 100644
index 000000000000..209aaebe148a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6u-811x.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8130/-8110 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6dl-udoo.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-udoo.dts
index d871cac1711f..d871cac1711f 100644
--- a/arch/arm/boot/dts/imx6dl-udoo.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-udoo.dts
diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts
index 779b52858a25..4875afadb630 100644
--- a/arch/arm/boot/dts/imx6dl-victgo.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts
@@ -18,14 +18,14 @@
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 		autorepeat;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		enter {
+		key-enter {
 			label = "Rotary Key";
 			gpios = <&gpio2 05 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_ENTER>;
@@ -54,6 +54,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	rotary-encoder {
@@ -73,18 +74,42 @@
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 
 		touch-thermal0 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 
 		touch-thermal1 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp1>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 	};
 
@@ -134,6 +159,13 @@
 	};
 };
 
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
 &ecspi2 {
 	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
@@ -182,10 +214,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rmii_phy>;
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx6dl-vicut1.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-vicut1.dts
index 5035d303447d..5035d303447d 100644
--- a/arch/arm/boot/dts/imx6dl-vicut1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-vicut1.dts
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard-revb1.dts
index c2946fbaa0dd..c2946fbaa0dd 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard-revb1.dts
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard-revd1.dts
index 6d1d863c2e3a..6d1d863c2e3a 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard-revd1.dts
diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard.dts
index 4a08d5a99452..4a08d5a99452 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard.dts
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
index 674af39c884a..8bc6376d0dc1 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
@@ -55,6 +55,7 @@
 	panel: panel {
 		compatible = "dataimage,scf0700c48ggu18";
 		power-supply = <&sw2_reg>;
+		backlight = <&backlight>;
 		status = "disabled";
 
 		port {
@@ -97,7 +98,6 @@
 		regulator-max-microvolt = <5000000>;
 		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
-		status = "okay";
 	};
 };
 
@@ -105,8 +105,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <20>;
 	phy-supply = <&sw2_reg>;
 	status = "okay";
 
@@ -119,17 +117,10 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy_port2: phy@1 {
-			reg = <1>;
-		};
-
-		phy_port3: phy@2 {
-			reg = <2>;
-		};
-
 		switch@10 {
 			compatible = "qca,qca8334";
-			reg = <10>;
+			reg = <0x10>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {
 				#address-cells = <1>;
@@ -150,15 +141,30 @@
 				eth2: port@2 {
 					reg = <2>;
 					label = "eth2";
+					phy-mode = "internal";
 					phy-handle = <&phy_port2>;
 				};
 
 				eth1: port@3 {
 					reg = <3>;
 					label = "eth1";
+					phy-mode = "internal";
 					phy-handle = <&phy_port3>;
 				};
 			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port2: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy_port3: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
 		};
 	};
 };
@@ -269,11 +275,11 @@
 		compatible = "ti,lp5562";
 		reg = <0x30>;
 		clock-mode = /bits/ 8 <1>;
-		status = "disabled";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 
-		chan@0 {
+		led@0 {
 			chan-name = "R";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
@@ -281,7 +287,7 @@
 			color = <LED_COLOR_ID_RED>;
 		};
 
-		chan@1 {
+		led@1 {
 			chan-name = "G";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
@@ -289,7 +295,7 @@
 			color = <LED_COLOR_ID_GREEN>;
 		};
 
-		chan@2 {
+		led@2 {
 			chan-name = "B";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
@@ -302,7 +308,6 @@
 		compatible = "atmel,24c128";
 		reg = <0x57>;
 		pagesize = <64>;
-		status = "okay";
 	};
 
 	touchscreen: touchscreen@5c {
@@ -312,7 +317,7 @@
 		interrupt-parent = <&gpio4>;
 		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 		attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
-		reset-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 		touchscreen-size-x = <800>;
 		touchscreen-size-y = <480>;
 		status = "disabled";
@@ -501,7 +506,7 @@
 		>;
 	};
 
-	pinctrl_usbh1_vbus: usbh1-vbus {
+	pinctrl_usbh1_vbus: usbh1-vbusgrp {
 		fsl,pins = <
 			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x98
 		>;
@@ -514,7 +519,7 @@
 		>;
 	};
 
-	pinctrl_usbotg_vbus: usbotg-vbus {
+	pinctrl_usbotg_vbus: usbotg-vbusgrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x98
 		>;
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-draco.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-draco.dts
index a38c407fd837..a38c407fd837 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-draco.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-draco.dts
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-hydra.dts
index a19609c7c7c0..a19609c7c7c0 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-hydra.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts
new file mode 100644
index 000000000000..5c2cd517589b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Lynx i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-lynx", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcd_display {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&panel {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchscreen {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-orion.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-orion.dts
index 884b236746bb..884b236746bb 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-orion.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-orion.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-phoenix.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-phoenix.dts
new file mode 100644
index 000000000000..e0292f11d03e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-phoenix.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Phoenix i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-phoenix", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&aliases {
+	/delete-property/ ethernet1;
+};
+
+&gpio_keys {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&switch_ports {
+	/delete-node/ port@2;
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-ursa.dts
index f6ae24efd4aa..f6ae24efd4aa 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-ursa.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi
new file mode 100644
index 000000000000..2f42c56c21f6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi
@@ -0,0 +1,615 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases: aliases {
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 32 64 128 255>;
+		default-brightness-level = <32>;
+		num-interpolated-steps = <8>;
+		power-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+		status = "disabled";
+
+		button {
+			label = "Factory RESET";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel: panel {
+		compatible = "dataimage,scf0700c48ggu18";
+		power-supply = <&sw2_reg>;
+		backlight = <&backlight>;
+		enable-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&sw2_reg>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+
+			switch_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethphy0: port@0 {
+					reg = <0>;
+					label = "cpu";
+					phy-mode = "rgmii-id";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				eth2: port@1 {
+					reg = <1>;
+					label = "eth2";
+					phy-handle = <&phy_port1>;
+				};
+
+				eth1: port@2 {
+					reg = <2>;
+					label = "eth1";
+					phy-handle = <&phy_port2>;
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port1: switchphy@11 {
+					reg = <0x11>;
+				};
+
+				phy_port2: switchphy@12 {
+					reg = <0x12>;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze200";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vsnvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	leds: led-controller@30 {
+		compatible = "ti,lp5562";
+		reg = <0x30>;
+		clock-mode = /bits/ 8 <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		led@0 {
+			chan-name = "R";
+			led-cur = /bits/ 8 <0x6e>;
+			max-cur = /bits/ 8 <0xc8>;
+			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			chan-name = "G";
+			led-cur = /bits/ 8 <0xbe>;
+			max-cur = /bits/ 8 <0xc8>;
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@2 {
+			chan-name = "B";
+			led-cur = /bits/ 8 <0xbe>;
+			max-cur = /bits/ 8 <0xc8>;
+			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <64>;
+	};
+
+	touchscreen: touchscreen@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		reg = <0x5c>;
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		status = "disabled";
+	};
+
+	rtc: rtc@68 {
+		compatible = "dallas,ds1341";
+		reg = <0x68>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "disabled";
+
+	oled_1309: oled@3c {
+		compatible = "solomon,ssd1309fb-i2c";
+		reg = <0x3c>;
+		solomon,height = <64>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,segment-no-remap;
+		solomon,prechargep2 = <15>;
+		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	oled_1305: oled@3d {
+		compatible = "solomon,ssd1305fb-i2c";
+		reg = <0x3d>;
+		solomon,height = <64>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,col-offset = <4>;
+		solomon,prechargep2 = <15>;
+		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	gpio_oled: gpio@41 {
+		compatible = "nxp,pca9536";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x41>;
+		vcc-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	touchkeys: keys@5a {
+		compatible = "fsl,mpr121-touchkey";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchkeys>;
+		reg = <0x5a>;
+		vdd-supply = <&sw2_reg>;
+		autorepeat;
+		linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>,
+				<KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>,
+				<KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>;
+		poll-interval = <50>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b020
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b020
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b020
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b020
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b020
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b020
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b020
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b020
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b020
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b020
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b020
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b020
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b020
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b020
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b010
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b010
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b098
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b899
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b899
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b899
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b899
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07                  0x1b0b0
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b098
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x8
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x1b098
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b098
+		>;
+	};
+
+	pinctrl_touchkeys: touchkeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b098
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b098
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0a8
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0a8
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b098
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b098
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__USB_H1_OC	0x1b098
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1-vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x98
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1b098
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b098
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotg-vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x98
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD	0x1f069
+			MX6QDL_PAD_SD4_CLK__SD4_CLK	0x10069
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0	0x17069
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1	0x17069
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2	0x17069
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3	0x17069
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4	0x17069
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5	0x17069
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6	0x17069
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7	0x17069
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__WDOG2_B	0x1b0b0
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "disabled";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	over-current-active-low;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	over-current-active-low;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+	status = "okay";
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <109>;
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	vmmc-supply = <&sw2_reg>;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl.dtsi
index 8e0ed209ede0..dc919e09a505 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl.dtsi
@@ -84,6 +84,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts
new file mode 100644
index 000000000000..15d4a98ee976
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6q-apalis-eval.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board v1.2";
+	compatible = "toradex,apalis_imx6q-eval-v1.2", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	reg_3v3_mmc: regulator-3v3-mmc {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_mmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_MMC";
+		startup-delay-us = <10000>;
+	};
+
+	reg_3v3_sd: regulator-3v3-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_sd>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_SD";
+		startup-delay-us = <10000>;
+	};
+
+	reg_can1: regulator-can1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can1_power>;
+		regulator-name = "5V_SW_CAN1";
+		startup-delay-us = <10000>;
+	};
+
+	reg_can2: regulator-can2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can2_power>;
+		regulator-name = "5V_SW_CAN2";
+		startup-delay-us = <10000>;
+	};
+
+	sound-carrier {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,name = "apalis-nau8822";
+		simple-audio-card,routing =
+			"Headphones", "LHP",
+			"Headphones", "RHP",
+			"Speaker", "LSPK",
+			"Speaker", "RSPK",
+			"Line Out", "AUXOUT1",
+			"Line Out", "AUXOUT2",
+			"LAUX", "Line In",
+			"RAUX", "Line In",
+			"LMICP", "Mic In",
+			"RMICP", "Mic In";
+		simple-audio-card,widgets =
+			"Headphones", "Headphones",
+			"Line Out", "Line Out",
+			"Speaker", "Speaker",
+			"Microphone", "Mic In",
+			"Line", "Line In";
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&nau8822_1a>;
+			system-clock-frequency = <12288000>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+	};
+};
+
+&can1 {
+	xceiver-supply = <&reg_can1>;
+	status = "okay";
+};
+
+&can2 {
+	xceiver-supply = <&reg_can2>;
+	status = "okay";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 */
+&i2c1 {
+	/* Audio Codec */
+	nau8822_1a: audio-codec@1a {
+		compatible = "nuvoton,nau8822";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nau8822>;
+		#sound-dai-cells = <0>;
+	};
+
+	/* Current measurement into module VCC */
+	hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <5000>;
+	};
+
+	/* Temperature Sensor */
+	temperature-sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	/* EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+		size = <256>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+/* MMC1 */
+&usdhc1 {
+	bus-width = <4>;
+	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
+	vmmc-supply = <&reg_3v3_mmc>;
+	status = "okay";
+};
+
+/* SD1 */
+&usdhc2 {
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
+	vmmc-supply = <&reg_3v3_sd>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enable_3v3_mmc: enable3v3mmcgrp {
+		fsl,pins = <
+			/* MMC1_PWR_CTRL */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_3v3_sd: enable3v3sdgrp {
+		fsl,pins = <
+			/* SD1_PWR_CTRL */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_can1_power: enablecan1powergrp {
+		fsl,pins = <
+			/* CAN1_PWR_EN */
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_can2_power: enablecan2powergrp {
+		fsl,pins = <
+			/* CAN2_PWR_EN */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+		>;
+	};
+
+	pinctrl_nau8822: nau8822grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT16__AUD5_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT17__AUD5_TXD	0x130b0
+			MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts
new file mode 100644
index 000000000000..1f2200f50059
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx6q-apalis-eval.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board";
+	compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	reg_pcie_switch: regulator-pcie-switch {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "pcie_switch";
+		startup-delay-us = <100000>;
+		status = "okay";
+	};
+};
+
+&can1 {
+	xceiver-supply = <&reg_3v3_sw>;
+	status = "okay";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3_sw>;
+	status = "okay";
+};
+
+&pcie {
+	vpcie-supply = <&reg_pcie_switch>;
+	status = "okay";
+};
+
+&sound_spdif {
+	status = "okay";
+};
+
+/* MMC1 */
+&usdhc1 {
+	status = "okay";
+};
+
+/* SD1 */
+&usdhc2 {
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi
new file mode 100644
index 000000000000..b6c45ad3f430
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2024 Toradex
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+		i2c2 = &i2c2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_3v3_sw: regulator-3v3-sw {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_SW";
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	/* active-high meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.1.dts
index 44637d606e61..44637d606e61 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.1.dts
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
index f9f7d99bd4db..3ac7a4501620 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
@@ -76,6 +76,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_enable_can1_power>;
 		regulator-name = "can1_supply";
+		startup-delay-us = <1000>;
 	};
 
 	reg_can2_supply: regulator-can2-supply {
@@ -85,6 +86,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_enable_can2_power>;
 		regulator-name = "can2_supply";
+		startup-delay-us = <1000>;
 	};
 };
 
@@ -202,11 +204,13 @@
 };
 
 &usbh1 {
+	disable-over-current;
 	vbus-supply = <&reg_usb_host_vbus>;
 	status = "okay";
 };
 
 &usbotg {
+	disable-over-current;
 	vbus-supply = <&reg_usb_otg_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts
index ce39c6a3f640..f338be435277 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts
@@ -151,11 +151,13 @@
 };
 
 &usbh1 {
+	disable-over-current;
 	vbus-supply = <&reg_usb_host_vbus>;
 	status = "okay";
 };
 
 &usbotg {
+	disable-over-current;
 	vbus-supply = <&reg_usb_otg_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval-v1.2.dts
new file mode 100644
index 000000000000..908dab57fd87
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval-v1.2.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6q-apalis-eval-v1.2.dts"
+#include "imx6qdl-apalis-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module V1.2+ on Apalis Evaluation Board v1.2";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval.dts
new file mode 100644
index 000000000000..5463d4127382
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6q-apalis-eval.dts"
+#include "imx6qdl-apalis-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module V1.2+ on Apalis Evaluation Board";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.1.dts
new file mode 100644
index 000000000000..84eabf81ba84
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.1.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6q-apalis-ixora-v1.1.dts"
+#include "imx6qdl-apalis-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module V1.2+ on Ixora Carrier Board V1.1";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.2.dts
new file mode 100644
index 000000000000..d7cfab4de457
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.2.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6q-apalis-ixora-v1.2.dts"
+#include "imx6qdl-apalis-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module V1.2+ on Ixora Carrier Board V1.2";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora.dts
new file mode 100644
index 000000000000..189b074e31ce
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6q-apalis-ixora.dts"
+#include "imx6qdl-apalis-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module V1.2+ on Ixora Carrier Board";
+};
diff --git a/arch/arm/boot/dts/imx6q-apf6dev.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apf6dev.dts
index 664b0af8f0bb..664b0af8f0bb 100644
--- a/arch/arm/boot/dts/imx6q-apf6dev.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apf6dev.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-arm2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-arm2.dts
new file mode 100644
index 000000000000..235148c1edf1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-arm2.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Armadillo2 Board";
+	compatible = "fsl,imx6q-arm2", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 0>;
+		enable-active-high;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		debug-led {
+			label = "Heartbeat";
+			gpios = <&gpio3 25 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "disabled"; /* gpmi nand conflicts with SD */
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_cdwp: usdhc3cdwpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3
+		     &pinctrl_usdhc3_cdwp>;
+	status = "okay";
+};
+
+&usdhc4 {
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,dte-mode;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dts
index d994b32ad825..d994b32ad825 100644
--- a/arch/arm/boot/dts/imx6q-b450v3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dts
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dts
index fa1a1df37cde..b0d345f5d071 100644
--- a/arch/arm/boot/dts/imx6q-b650v3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dts
@@ -98,8 +98,8 @@
 };
 
 &usbphy1 {
-	fsl,tx-cal-45-dn-ohms = <55>;
-	fsl,tx-cal-45-dp-ohms = <55>;
+	fsl,tx-cal-45-dn-ohms = <54>;
+	fsl,tx-cal-45-dp-ohms = <54>;
 	fsl,tx-d-cal = <100>;
 };
 
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
index db8c332df6a1..cad112e05475 100644
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
@@ -227,7 +227,6 @@
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 
 		bridge@2,1 {
 			compatible = "pci10b5,8605";
@@ -235,7 +234,6 @@
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			ethernet@3,0 {
@@ -250,7 +248,6 @@
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			switch_nic: ethernet@4,0 {
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
index f266f1b7e0cf..53013b12c2ec 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
@@ -55,7 +55,7 @@
 		compatible = "pwm-backlight";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_display>;
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
 				      10  11  12  13  14  15  16  17  18  19
 				      20  21  22  23  24  25  26  27  28  29
@@ -222,6 +222,8 @@
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
@@ -349,7 +351,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -624,7 +625,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_reset: usdhc3grp-reset {
+	pinctrl_usdhc3_reset: usdhc3-resetgrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_RST__SD3_RESET   0x170F9
 		>;
diff --git a/arch/arm/boot/dts/imx6q-bosch-acc.dts b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts
index 8263bfef9bf8..d3f14b4d3b51 100644
--- a/arch/arm/boot/dts/imx6q-bosch-acc.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts
@@ -36,7 +36,7 @@
 
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 200000>;
+		pwms = <&pwm1 0 200000 0>;
 		brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>;
 		num-interpolated-steps = <10>;
 		default-brightness-level = <60>;
@@ -117,14 +117,14 @@
 			color = <LED_COLOR_ID_RED>;
 			max-brightness = <248>;
 			default-state = "off";
-			pwms = <&pwm2 0 500000>;
+			pwms = <&pwm2 0 500000 0>;
 		};
 
 		led_white: led-1 {
 			color = <LED_COLOR_ID_WHITE>;
 			max-brightness = <248>;
 			default-state = "off";
-			pwms = <&pwm3 0 500000>;
+			pwms = <&pwm3 0 500000 0>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -314,7 +314,6 @@
 			};
 
 			sw3a_reg: sw3a {
-				compatible = "regulator-fixed";
 				regulator-name = "DDR_1V5a";
 				regulator-boot-on;
 				regulator-always-on;
@@ -322,7 +321,6 @@
 			};
 
 			sw3b_reg: sw3b {
-				compatible = "regulator-fixed";
 				regulator-name = "DDR_1V5b";
 				regulator-boot-on;
 				regulator-always-on;
@@ -486,28 +484,24 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
index ead83091e193..e1d0c6e123fd 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
@@ -94,7 +94,7 @@
 		mdio-gpio0 = &mdio0;
 	};
 
-	mdio0: mdio-gpio {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>, /* mdc */
 			<&gpio2 7 GPIO_ACTIVE_HIGH>; /* mdio */
@@ -160,7 +160,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5>;
 	status = "okay";
 
-	m25_eeprom: flash@0 {
+	m25_eeprom: eeprom@0 {
 		compatible = "atmel,at25";
 		spi-max-frequency = <10000000>;
 		size = <0x8000>;
@@ -228,6 +228,7 @@
 			sgtl5000: codec@a {
 				compatible = "fsl,sgtl5000";
 				reg = <0x0a>;
+				#sound-dai-cells = <0>;
 				clocks = <&mclk>;
 				VDDA-supply = <&reg_1p8v>;
 				VDDIO-supply = <&reg_3p3v>;
@@ -244,6 +245,7 @@
 				reg = <0x74>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				interrupt-parent = <&gpio2>;
 				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -389,7 +391,6 @@
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts
index 1ad41c944b4b..299106fbe51c 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts
@@ -127,12 +127,21 @@
 		};
 	};
 
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_in: spdif-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-out;
-		spdif-in;
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>, <&spdif_in>;
 	};
 };
 
@@ -141,7 +150,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_RCLKDIR |
@@ -152,7 +161,7 @@
 		>;
 	};
 
-	audmux4 {
+	mux-audmux4 {
 		fsl,audmux-port = <3>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSDIR |
@@ -263,7 +272,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "st,m25p", "jedec,spi-nor";
+		compatible = "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
diff --git a/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i-emmc-som-v15.dts
index 3e59ebbb3608..3e59ebbb3608 100644
--- a/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i-emmc-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i-som-v15.dts
index dab70d1230a2..dab70d1230a2 100644
--- a/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i.dts
index 1c7b262e3709..1c7b262e3709 100644
--- a/arch/arm/boot/dts/imx6q-cubox-i.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i.dts
diff --git a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dfi-fs700-m60.dts
index 8bfe6337cd65..8bfe6337cd65 100644
--- a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-dfi-fs700-m60.dts
diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dhcom-pdk2.dts
index d4d57370615d..6efd7e9fc1b1 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-dhcom-pdk2.dts
@@ -4,7 +4,7 @@
  * Copyright (C) 2018 Marek Vasut <marex@denx.de>
  *
  * DHCOM iMX6 variant:
- * DHCM-iMX6Q-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
+ * DHCM-iMX6Q-C080-R102-F0819-E-SD-RTC-T-HS-I-01D2
  * DHCOM PCB number: 493-300 or newer
  * PDK2 PCB number: 516-400 or newer
  */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts b/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts
new file mode 100644
index 000000000000..059750270fc4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+
+#include "imx6q-display5.dtsi"
+
+&panel {
+	compatible = "tianma,tm070jdhg30";
+};
+
+&ldb {
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi
index fef5d7254536..4e448b4810f2 100644
--- a/arch/arm/boot/dts/imx6q-display5.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi
@@ -1,38 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017
  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -147,7 +116,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -159,7 +128,7 @@
 		>;
 	};
 
-	aud6 {
+	mux-aud6 {
 		fsl,audmux-port = <5>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_RFSEL(8) |
@@ -276,7 +245,7 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c256";
 		pagesize = <64>;
 		reg = <0x50>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts
new file mode 100644
index 000000000000..17fabff80e90
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts
@@ -0,0 +1,470 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Data Modul AG
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Data Modul eDM-QMX6 Board";
+	compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	aliases {
+		gpio7 = &stmpe_gpio1;
+		gpio8 = &stmpe_gpio2;
+		stmpe-i2c0 = &stmpe1;
+		stmpe-i2c1 = &stmpe2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_switch: regulator-usb-otg-switch {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_switch";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 12 0>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_host1: regulator-usb-host1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_host1_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 31 0>;
+		enable-active-high;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			label = "blue";
+			gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-pink {
+			label = "pink";
+			gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-red {
+			label = "red";
+			gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&ecspi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5>;
+	cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "m25p80", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-supply = <&vgen2_1v2_eth>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2
+		     &pinctrl_stmpe1
+		     &pinctrl_stmpe2
+		     &pinctrl_pfuze>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_1v2_eth: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vdd_high_in: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	stmpe1: stmpe1601@40 {
+		compatible = "st,stmpe1601";
+		reg = <0x40>;
+		interrupts = <30 0>;
+		interrupt-parent = <&gpio3>;
+		vcc-supply = <&sw2_reg>;
+		vio-supply = <&sw2_reg>;
+
+		stmpe_gpio1: stmpe_gpio {
+			#gpio-cells = <2>;
+			compatible = "st,stmpe-gpio";
+		};
+	};
+
+	stmpe2: stmpe1601@44 {
+		compatible = "st,stmpe1601";
+		reg = <0x44>;
+		interrupts = <2 0>;
+		interrupt-parent = <&gpio5>;
+		vcc-supply = <&sw2_reg>;
+		vio-supply = <&sw2_reg>;
+
+		stmpe_gpio2: stmpe_gpio {
+			#gpio-cells = <2>;
+			compatible = "st,stmpe-gpio";
+		};
+	};
+
+	temp1: ad7414@4c {
+		compatible = "ad,ad7414";
+		reg = <0x4c>;
+	};
+
+	temp2: ad7414@4d {
+		compatible = "ad,ad7414";
+		reg = <0x4d>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi5: ecspi5rp-1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x80000000
+			MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x80000000
+			MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x80000000
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x80000000
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x100b1
+		>;
+	};
+
+	pinctrl_pfuze: pfuze100grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x80000000
+		>;
+	};
+
+	pinctrl_stmpe1: stmpe1grp {
+		fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
+	};
+
+	pinctrl_stmpe2: stmpe2grp {
+		fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host1>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-dms-ba16.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts
index 137db38f0d27..484a60892229 100644
--- a/arch/arm/boot/dts/imx6q-dms-ba16.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts
@@ -47,7 +47,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5>;
 	status = "okay";
 
-	m25_eeprom: flash@0 {
+	m25_eeprom: eeprom@0 {
 		compatible = "atmel,at25256B", "atmel,at25";
 		spi-max-frequency = <20000000>;
 		size = <0x8000>;
@@ -96,6 +96,7 @@
 	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&sys_mclk>;
 		lrclk-strength = <0x3>;
 		VDDA-supply = <&reg_1p8v>;
diff --git a/arch/arm/boot/dts/imx6q-ds.dts b/arch/arm/boot/dts/nxp/imx/imx6q-ds.dts
index b0a63a133977..b0a63a133977 100644
--- a/arch/arm/boot/dts/imx6q-ds.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-ds.dts
diff --git a/arch/arm/boot/dts/imx6q-emcon-avari.dts b/arch/arm/boot/dts/nxp/imx/imx6q-emcon-avari.dts
index 0f582a9d4c0e..02813368a820 100644
--- a/arch/arm/boot/dts/imx6q-emcon-avari.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-emcon-avari.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 or MIT)
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 //
 // Copyright (C) 2018 emtrion GmbH
 //
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts
index c63f371ede8b..78d941fef5df 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts
@@ -146,6 +146,7 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gk802.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gk802.dts
new file mode 100644
index 000000000000..e0d29b07fbb1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gk802.dts
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2013 Philipp Zabel
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Zealz GK802";
+	compatible = "zealz,imx6q-gk802", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		recovery-button {
+			label = "recovery";
+			gpios = <&gpio3 16 1>;
+			linux,code = <KEY_RESTART>;
+			wakeup-source;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+/* Internal I2C */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* SDMC DM2016 1024 bit EEPROM + 128 bit OTP */
+	eeprom: dm2016@51 {
+		compatible = "sdmc,dm2016";
+		reg = <0x51>;
+	};
+};
+
+/* External I2C via HDMI */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* Recovery button, active-low */
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16  0x100b1
+			/* RTL8192CU enable GPIO, active-low */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+		>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* External USB-A port (USBOTG) */
+&usbotg {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Internal USB port (USBH1), connected to RTL8192CU */
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* External microSD */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+/* Internal microSD */
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw51xx.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw51xx.dts
index f80173458e3f..f80173458e3f 100644
--- a/arch/arm/boot/dts/imx6q-gw51xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw51xx.dts
diff --git a/arch/arm/boot/dts/imx6q-gw52xx.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw52xx.dts
index 6e1c493c9c8c..6e1c493c9c8c 100644
--- a/arch/arm/boot/dts/imx6q-gw52xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw52xx.dts
diff --git a/arch/arm/boot/dts/imx6q-gw53xx.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw53xx.dts
index f13df8e9c8c4..f13df8e9c8c4 100644
--- a/arch/arm/boot/dts/imx6q-gw53xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw53xx.dts
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts
index e894faba571f..bf8fde9cb38d 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts
@@ -34,20 +34,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
 			default-state = "off";
@@ -67,47 +67,37 @@
 		status = "okay";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_1p0v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "1P0V";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-always-on;
-		};
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
 
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		reg_usb_h1_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		reg_usb_otg_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	sound {
@@ -194,7 +184,7 @@
 		#gpio-cells = <2>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -206,7 +196,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
@@ -320,6 +310,7 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&sw4_reg>;
 		VDDIO-supply = <&reg_3p3v>;
diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw54xx.dts
index d5d46908cf6e..d5d46908cf6e 100644
--- a/arch/arm/boot/dts/imx6q-gw54xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw54xx.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts
new file mode 100644
index 000000000000..44d1871ac666
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw551x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW551X";
+	compatible = "gw,imx6q-gw551x", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw552x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw552x.dts
index c973b7304225..c973b7304225 100644
--- a/arch/arm/boot/dts/imx6q-gw552x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw552x.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts
new file mode 100644
index 000000000000..22842f2ef685
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2016 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw553x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW553X";
+	compatible = "gw,imx6q-gw553x", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts
new file mode 100644
index 000000000000..c69fdd064e2f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw560x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW560X";
+	compatible = "gw,imx6q-gw560x", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts
new file mode 100644
index 000000000000..a9a33eeb9712
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5903.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5903";
+	compatible = "gw,imx6q-gw5903", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts
new file mode 100644
index 000000000000..25a93cd4e5f5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5904.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5904";
+	compatible = "gw,imx6q-gw5904", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5907.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5907.dts
index b25526ef5886..b25526ef5886 100644
--- a/arch/arm/boot/dts/imx6q-gw5907.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5907.dts
diff --git a/arch/arm/boot/dts/imx6q-gw5910.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5910.dts
index 6aafa2fcee08..6aafa2fcee08 100644
--- a/arch/arm/boot/dts/imx6q-gw5910.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5910.dts
diff --git a/arch/arm/boot/dts/imx6q-gw5912.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5912.dts
index 4dcbd943cd93..4dcbd943cd93 100644
--- a/arch/arm/boot/dts/imx6q-gw5912.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5912.dts
diff --git a/arch/arm/boot/dts/imx6q-gw5913.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5913.dts
index 6f511f1665fd..6f511f1665fd 100644
--- a/arch/arm/boot/dts/imx6q-gw5913.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5913.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
new file mode 100644
index 000000000000..4c8ea4381559
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
@@ -0,0 +1,381 @@
+/*
+ * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+
+/ {
+	model = "Auvidea H100";
+	compatible = "auvidea,h100", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	hdmi_osc: hdmi-osc {
+		compatible = "fixed-clock";
+		clock-output-names = "hdmi-osc";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_leds>;
+
+		led0: led-power {
+			label = "power";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led1: led-stream {
+			label = "stream";
+			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2: led-rec {
+			label = "rec";
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_hdmi: regulator-hdmi {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		regulator-name = "V_HDMI";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usbh1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
+		regulator-name = "USB_H1_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbotg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
+		regulator-name = "USB_OTG_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sound-sgtl5000 {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "H100 on-board codec";
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-ext-port = <5>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_i2c1>;
+	status = "okay";
+
+	eeprom: eeprom@51 {
+		compatible = "microchip,24c02", "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sgtl5000: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_sgtl5000>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	tc358743: tc358743@f {
+		compatible = "toshiba,tc358743";
+		reg = <0x0f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_tc358743>;
+		clocks = <&hdmi_osc>;
+		clock-names = "refclk";
+		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+		/* IRQ has a wrong pull resistor which renders it useless  */
+
+		port {
+			tc358743_out: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				data-lanes = <1 2 3 4>;
+				clock-lanes = <0>;
+				clock-noncontinuous;
+				link-frequencies = /bits/ 64 <297000000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_h100_hdmi: h100-hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_h100_i2c1: h100-i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_h100_i2c2: h100-i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_h100_leds: pinctrl-h100-ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b0
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
+		>;
+	};
+
+	pinctrl_h100_reg_hdmi: h100-reg-hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b0
+		>;
+	};
+
+	pinctrl_h100_sgtl5000: h100-sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+			MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
+			MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0
+			MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
+		>;
+	};
+
+	pinctrl_h100_tc358743: h100-tc358743grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
+		>;
+	};
+
+	pinctrl_h100_uart2: h100-uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_h100_usbotg_id: hummingboard-usbotg-idgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+		>;
+	};
+
+	pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+		>;
+	};
+
+	pinctrl_h100_usdhc2: h100-usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x13059
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
+		>;
+	};
+
+	pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
+		>;
+	};
+
+	pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
+		>;
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port {
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&tc358743_out>;
+			data-lanes = <1 2 3 4>;
+			clock-lanes = <0>;
+			clock-noncontinuous;
+			link-frequencies = /bits/ 64 <297000000>;
+		};
+	};
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_usbotg_id>;
+	vbus-supply = <&reg_usbotg_vbus>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_h100_usdhc2>;
+	pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard-emmc-som-v15.dts
index c51b4e4fd71e..c51b4e4fd71e 100644
--- a/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard-emmc-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard-som-v15.dts
index e4132d62ffa2..e4132d62ffa2 100644
--- a/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard.dts
index 8c9e94e648a7..8c9e94e648a7 100644
--- a/arch/arm/boot/dts/imx6q-hummingboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard.dts
diff --git a/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2-emmc-som-v15.dts
index 1998ebfa0fe0..1998ebfa0fe0 100644
--- a/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2-emmc-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2-som-v15.dts
index d3ad7329cd6d..d3ad7329cd6d 100644
--- a/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6q-hummingboard2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2.dts
index 5249f53dcdbc..5249f53dcdbc 100644
--- a/arch/arm/boot/dts/imx6q-hummingboard2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2.dts
diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-mipi.dts
index d51745268dbf..d51745268dbf 100644
--- a/arch/arm/boot/dts/imx6q-icore-mipi.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-mipi.dts
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts
index 02aca1e28ce3..02aca1e28ce3 100644
--- a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts
index 241811c52b62..241811c52b62 100644
--- a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts
diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-rqs.dts
index cf6ba724f497..cf6ba724f497 100644
--- a/arch/arm/boot/dts/imx6q-icore-rqs.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-rqs.dts
diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore.dts
index fe28c3cf54c0..fe28c3cf54c0 100644
--- a/arch/arm/boot/dts/imx6q-icore.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts
new file mode 100644
index 000000000000..94c395cc020e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+#include "imx6qdl-kontron-samx6i-ads2.dtsi"
+
+/ {
+	model = "Kontron SMARC-sAMX6i Quad/Dual on SMARC Eval 2.0 carrier";
+	compatible = "kontron,imx6q-samx6i-ads2", "kontron,imx6q-samx6i", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi
new file mode 100644
index 000000000000..e76963436079
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+
+/ {
+	model = "Kontron SMARC-sAMX6i Quad/Dual";
+	compatible = "kontron,imx6q-samx6i", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-kp-tpc.dts b/arch/arm/boot/dts/nxp/imx/imx6q-kp-tpc.dts
index 50fbf46d17c2..50fbf46d17c2 100644
--- a/arch/arm/boot/dts/imx6q-kp-tpc.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-kp-tpc.dts
diff --git a/arch/arm/boot/dts/imx6q-kp.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi
index 1ade0bff681d..d6deb8c22b8c 100644
--- a/arch/arm/boot/dts/imx6q-kp.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi
@@ -15,7 +15,7 @@
 / {
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 255>;
 		num-interpolated-steps = <255>;
 		default-brightness-level = <250>;
@@ -23,7 +23,7 @@
 
 	beeper {
 		compatible = "pwm-beeper";
-		pwms = <&pwm2 0 500000>;
+		pwms = <&pwm2 0 500000 0>;
 	};
 
 	lcd_display: display {
@@ -66,17 +66,17 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led-green {
 			label = "led1";
 			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "off";
 		};
 
-		red {
+		led-red {
 			label = "led0";
 			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "off";
 		};
 	};
@@ -135,7 +135,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -147,7 +147,7 @@
 		>;
 	};
 
-	aud3 {
+	mux-aud3 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -378,14 +378,12 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/nxp/imx/imx6q-logicpd.dts
index 46a4ddedb423..86b813a57c1e 100644
--- a/arch/arm/boot/dts/imx6q-logicpd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-logicpd.dts
@@ -110,13 +110,13 @@
 };
 
 &iomuxc {
-	pinctrl_lcd_reg: lcdreg {
+	pinctrl_lcd_reg: lcdreggrp {
 		fsl,pins = <
 			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17	0x100b0	/* R_LCD_PANEL_PWR */
 		>;
 	};
 
-	pinctrl_lcd_reset: lcdreset {
+	pinctrl_lcd_reset: lcdresetgrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x100b0	/* LCD_nRESET */
 		>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-lxr.dts b/arch/arm/boot/dts/nxp/imx/imx6q-lxr.dts
new file mode 100644
index 000000000000..ae4f8eeb105d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-lxr.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2024 Comvetia AG
+
+/dts-v1/;
+#include "imx6q-phytec-pfla02.dtsi"
+
+/ {
+	model = "COMVETIA QSoIP LXR-2";
+	compatible = "comvetia,imx6q-lxr", "phytec,imx6q-pfla02", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi_gpio>;
+		sck-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fpga@0 {
+			compatible = "altr,fpga-passive-serial";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fpga>;
+			nconfig-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+			nstat-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+			confd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&fec {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usdhc3 {
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fpga: fpgagrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06       0x1b0b0
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18     0x1b0b0
+			MX6QDL_PAD_DI0_PIN3__GPIO4_IO19     0x1b0b0
+		>;
+	};
+
+	pinctrl_spi_gpio: spigpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08  0x1b0b0
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07  0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-marsboard.dts
index cc1801002394..2c9961333b0a 100644
--- a/arch/arm/boot/dts/imx6q-marsboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-marsboard.dts
@@ -73,14 +73,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user1 {
+		led-user1 {
 			label = "imx6:green:user1";
 			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "heartbeat";
 		};
 
-		user2 {
+		led-user2 {
 			label = "imx6:green:user2";
 			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
 			default-state = "off";
diff --git a/arch/arm/boot/dts/imx6q-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-mba6.dtsi
index 0d7be4567291..1e5eb837fd80 100644
--- a/arch/arm/boot/dts/imx6q-mba6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-mba6.dtsi
@@ -32,7 +32,7 @@
 };
 
 &iomuxc {
-	pinctrl_ecspi5_mba6x: ecspi5grp-mba6x {
+	pinctrl_ecspi5_mba6x: ecspi5-mba6xgrp {
 		fsl,pins = <
 			/* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
 			MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b099
diff --git a/arch/arm/boot/dts/imx6q-mba6a.dts b/arch/arm/boot/dts/nxp/imx/imx6q-mba6a.dts
index 349a08605a5e..349a08605a5e 100644
--- a/arch/arm/boot/dts/imx6q-mba6a.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-mba6a.dts
diff --git a/arch/arm/boot/dts/imx6q-mba6b.dts b/arch/arm/boot/dts/nxp/imx/imx6q-mba6b.dts
index 02c9f3e91b8f..02c9f3e91b8f 100644
--- a/arch/arm/boot/dts/imx6q-mba6b.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-mba6b.dts
diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
index 55692c73943d..ef5c0eda8b15 100644
--- a/arch/arm/boot/dts/imx6q-mccmon6.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
@@ -100,8 +100,10 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -277,7 +279,7 @@
 	ranges = <0 0 0x08000000 0x08000000>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0 0x02000000>;
 		#address-cells = <1>;
@@ -290,8 +292,6 @@
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-
 	pinctrl_backlight: dispgrp {
 		fsl,pins = <
 			/* BLEN_OUT */
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6_max.dts
index 03bec0c53063..03bec0c53063 100644
--- a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6_max.dts
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6_som2.dts
index eb4eecb6ed22..eb4eecb6ed22 100644
--- a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6_som2.dts
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6x.dts
index 435445a34ad0..435445a34ad0 100644
--- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6x.dts
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts
index 225cf6b7a7a4..24fc3ff1c70c 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts
@@ -67,7 +67,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 10000000>;
+		pwms = <&pwm1 0 10000000 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_backlight_novena>;
 		power-supply = <&reg_lvds_lcd>;
@@ -86,7 +86,7 @@
 			linux,code = <KEY_POWER>;
 		};
 
-		lid {
+		lid-event {
 			label = "Lid";
 			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
 			linux,input-type = <5>;	/* EV_SW */
@@ -99,7 +99,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_leds_novena>;
 
-		heartbeat {
+		led-heartbeat {
 			label = "novena:white:panel";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
@@ -265,7 +265,7 @@
 		reg = <0x1c>;
 	};
 
-	rtc: pcf8523@68 {
+	rtc: rtc@68 {
 		compatible = "nxp,pcf8523";
 		reg = <0x68>;
 	};
@@ -288,7 +288,7 @@
 		vio-supply = <&reg_3p3v>;
 		vcc-supply = <&reg_3p3v>;
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			st,sample-time = <4>;
 			st,mod-12b = <1>;
@@ -308,7 +308,7 @@
 	pinctrl-0 = <&pinctrl_i2c2_novena>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
@@ -465,7 +465,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
@@ -531,7 +530,7 @@
 };
 
 &iomuxc {
-	pinctrl_audmux_novena: audmuxgrp-novena {
+	pinctrl_audmux_novena: audmux-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
 			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
@@ -540,7 +539,7 @@
 		>;
 	};
 
-	pinctrl_backlight_novena: backlightgrp-novena {
+	pinctrl_backlight_novena: backlight-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
 			MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28	0x1b0b1
@@ -548,7 +547,7 @@
 		>;
 	};
 
-	pinctrl_ecspi3_novena: ecspi3grp-novena {
+	pinctrl_ecspi3_novena: ecspi3-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
 			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
@@ -556,7 +555,7 @@
 		>;
 	};
 
-	pinctrl_enet_novena: enetgrp-novena {
+	pinctrl_enet_novena: enet-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
@@ -579,7 +578,7 @@
 		>;
 	};
 
-	pinctrl_fpga_gpio: fpgagpiogrp-novena {
+	pinctrl_fpga_gpio: fpgagpio-novenagrp {
 		fsl,pins = <
 			/* FPGA power */
 			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b1
@@ -615,7 +614,7 @@
 		>;
 	};
 
-	pinctrl_fpga_eim: fpgaeimgrp-novena {
+	pinctrl_fpga_eim: fpgaeim-novenagrp {
 		fsl,pins = <
 			/* FPGA power */
 			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b1
@@ -651,7 +650,7 @@
 		>;
 	};
 
-	pinctrl_gpio_keys_novena: gpiokeysgrp-novena {
+	pinctrl_gpio_keys_novena: gpiokeys-novenagrp {
 		fsl,pins = <
 			/* User button */
 			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
@@ -662,35 +661,35 @@
 		>;
 	};
 
-	pinctrl_hdmi_novena: hdmigrp-novena {
+	pinctrl_hdmi_novena: hdmi-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
 			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b1
 		>;
 	};
 
-	pinctrl_i2c1_novena: i2c1grp-novena {
+	pinctrl_i2c1_novena: i2c1-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
 		>;
 	};
 
-	pinctrl_i2c2_novena: i2c2grp-novena {
+	pinctrl_i2c2_novena: i2c2-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
 		>;
 	};
 
-	pinctrl_i2c3_novena: i2c3grp-novena {
+	pinctrl_i2c3_novena: i2c3-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
 		>;
 	};
 
-	pinctrl_kpp_novena: kppgrp-novena {
+	pinctrl_kpp_novena: kpp-novenagrp {
 		fsl,pins = <
 			/* Front panel button */
 			MX6QDL_PAD_KEY_ROW1__KEY_ROW1		0x1b0b1
@@ -699,13 +698,13 @@
 		>;
 	};
 
-	pinctrl_leds_novena: ledsgrp-novena {
+	pinctrl_leds_novena: leds-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21		0x1b0b1
 		>;
 	};
 
-	pinctrl_pcie_novena: pciegrp-novena {
+	pinctrl_pcie_novena: pcie-novenagrp {
 		fsl,pins = <
 			/* Reset */
 			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b1
@@ -716,13 +715,13 @@
 		>;
 	};
 
-	pinctrl_sata_novena: satagrp-novena {
+	pinctrl_sata_novena: sata-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b1
 		>;
 	};
 
-	pinctrl_senoko_novena: senokogrp-novena {
+	pinctrl_senoko_novena: senoko-novenagrp {
 		fsl,pins = <
 			/* Senoko IRQ line */
 			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x13048
@@ -731,7 +730,7 @@
 		>;
 	};
 
-	pinctrl_sound_novena: soundgrp-novena {
+	pinctrl_sound_novena: sound-novenagrp {
 		fsl,pins = <
 			/* Audio power regulator */
 			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b1
@@ -741,41 +740,41 @@
 		>;
 	};
 
-	pinctrl_stmpe_novena: stmpegrp-novena {
+	pinctrl_stmpe_novena: stmpe-novenagrp {
 		fsl,pins = <
 			/* Touchscreen interrupt */
 			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b1
 		>;
 	};
 
-	pinctrl_uart2_novena: uart2grp-novena {
+	pinctrl_uart2_novena: uart2-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
 			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
 		>;
 	};
 
-	pinctrl_uart3_novena: uart3grp-novena {
+	pinctrl_uart3_novena: uart3-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
 			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
 		>;
 	};
 
-	pinctrl_uart4_novena: uart4grp-novena {
+	pinctrl_uart4_novena: uart4-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
 			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
 		>;
 	};
 
-	pinctrl_usbotg_novena: usbotggrp-novena {
+	pinctrl_usbotg_novena: usbotg-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
 		>;
 	};
 
-	pinctrl_usdhc2_novena: usdhc2grp-novena {
+	pinctrl_usdhc2_novena: usdhc2-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
 			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
@@ -790,7 +789,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_novena: usdhc3grp-novena {
+	pinctrl_usdhc3_novena: usdhc3-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-mira-rdk-emmc.dts
index 322f071d972f..322f071d972f 100644
--- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-mira-rdk-emmc.dts
diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-mira-rdk-nand.dts
index 3f13726c8058..3f13726c8058 100644
--- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-mira-rdk-nand.dts
diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-pbab01.dts
index affe30b02d5a..affe30b02d5a 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-pbab01.dts
diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-pfla02.dtsi
index 500944bd2a05..500944bd2a05 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-pfla02.dtsi
diff --git a/arch/arm/boot/dts/imx6q-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pico-dwarf.dts
index 479a63ed42af..479a63ed42af 100644
--- a/arch/arm/boot/dts/imx6q-pico-dwarf.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pico-dwarf.dts
diff --git a/arch/arm/boot/dts/imx6q-pico-hobbit.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pico-hobbit.dts
index b767131068f5..b767131068f5 100644
--- a/arch/arm/boot/dts/imx6q-pico-hobbit.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pico-hobbit.dts
diff --git a/arch/arm/boot/dts/imx6q-pico-nymph.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pico-nymph.dts
index e8ad4c12b263..e8ad4c12b263 100644
--- a/arch/arm/boot/dts/imx6q-pico-nymph.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pico-nymph.dts
diff --git a/arch/arm/boot/dts/imx6q-pico-pi.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pico-pi.dts
index cc2394ddad6c..cc2394ddad6c 100644
--- a/arch/arm/boot/dts/imx6q-pico-pi.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pico-pi.dts
diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6q-pinfunc.h
index e40409d04b97..e40409d04b97 100644
--- a/arch/arm/boot/dts/imx6q-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pinfunc.h
diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts
index 7a33e54cc0f1..56b77cc0af2b 100644
--- a/arch/arm/boot/dts/imx6q-pistachio.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts
@@ -100,7 +100,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 			wakeup-source;
@@ -124,7 +124,7 @@
 
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 50000>;
+		pwms = <&pwm1 0 50000 0>;
 		brightness-levels = <
 			0  /*1  2  3  4  5  6*/  7  8  9
 			10 11 12 13 14 15 16 17 18 19
@@ -196,6 +196,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1_sgtl5000>;
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_1p8v>;
 		VDDIO-supply = <&reg_1p8v>;
@@ -208,7 +209,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
@@ -570,7 +571,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -636,11 +636,11 @@
 };
 
 &usbphy1 {
-	fsl,tx-d-cal = <0x5>;
+	fsl,tx-d-cal = <79>;
 };
 
 &usbphy2 {
-	fsl,tx-d-cal = <0x5>;
+	fsl,tx-d-cal = <79>;
 };
 
 &usdhc1 {
diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts
index b4605edfd2ab..fb81bd8ba035 100644
--- a/arch/arm/boot/dts/imx6q-prti6q.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts
@@ -22,7 +22,7 @@
 		compatible = "pwm-backlight";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_backlight>;
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 16 64 255>;
 		num-interpolated-steps = <16>;
 		default-brightness-level = <1>;
@@ -111,12 +111,21 @@
 		};
 	};
 
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_in: spdif-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
-		spdif-out;
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>, <&spdif_in>;
 	};
 };
 
@@ -292,7 +301,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -359,13 +367,16 @@
 	keep-power-in-suspend;
 	status = "okay";
 
-	wifi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wifi@2 {
 		compatible = "ti,wl1271";
+		reg = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_wifi>;
 		interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = "38400000";
-		tcxo-clock-frequency = "19200000";
+		ref-clock-frequency = <38400000>;
+		tcxo-clock-frequency = <19200000>;
 	};
 };
 
@@ -535,7 +546,7 @@
 		>;
 	};
 
-	pinctrl_wifi_npd: wifinpd {
+	pinctrl_wifi_npd: wifinpdgrp {
 		fsl,pins = <
 			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b8b0
 		>;
diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-prtwd2.dts
index 349959d38020..0e02e448db10 100644
--- a/arch/arm/boot/dts/imx6q-prtwd2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-prtwd2.dts
@@ -22,6 +22,13 @@
 		reg = <0x80000000 0x20000000>;
 	};
 
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
 	usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -49,13 +56,17 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>;
-	clock-names = "ipg", "ahb";
 	status = "okay";
 
 	fixed-link {
@@ -122,7 +133,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb_eth_chg>;
 
-	pinctrl_can1phy: can1phy {
+	pinctrl_can1phy: can1phygrp {
 		fsl,pins = <
 			/* CAN1_SR */
 			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
@@ -145,9 +156,6 @@
 			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22	0x1b0b0
 			/* nINTRP */
 			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23	0x1b0b0
-
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x10030
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x10030
 		>;
 	};
 
@@ -179,7 +187,7 @@
 		>;
 	};
 
-	pinctrl_wifi_npd: wifinpd {
+	pinctrl_wifi_npd: wifinpdgrp {
 		fsl,pins = <
 			/* WL_REG_ON */
 			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x13069
diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/nxp/imx/imx6q-rex-pro.dts
index 271f4b2d9b9f..271f4b2d9b9f 100644
--- a/arch/arm/boot/dts/imx6q-rex-pro.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-rex-pro.dts
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6q-sabreauto.dts
index 6e981a3e0a83..6e981a3e0a83 100644
--- a/arch/arm/boot/dts/imx6q-sabreauto.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-sabreauto.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-sabrelite.dts b/arch/arm/boot/dts/nxp/imx/imx6q-sabrelite.dts
new file mode 100644
index 000000000000..7c6a2f234ccb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-sabrelite.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Lite Board";
+	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ipu1_csi1_from_mipi_vc1 {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/nxp/imx/imx6q-sabresd.dts
index eec944673c0b..eec944673c0b 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-sabresd.dts
diff --git a/arch/arm/boot/dts/imx6q-savageboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-savageboard.dts
index 717ac62fc2cf..717ac62fc2cf 100644
--- a/arch/arm/boot/dts/imx6q-savageboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-savageboard.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-sbc6x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-sbc6x.dts
new file mode 100644
index 000000000000..84fbcd129179
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-sbc6x.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Pavel Machek <pavel@denx.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+	model = "MicroSys sbc6x board";
+	compatible = "microsys,sbc6x", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-skov-revc-lt2.dts
index ff97d22eb09f..ff97d22eb09f 100644
--- a/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-skov-revc-lt2.dts
diff --git a/arch/arm/boot/dts/imx6q-skov-revc-lt6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-skov-revc-lt6.dts
index 3e3b36ad362a..3e3b36ad362a 100644
--- a/arch/arm/boot/dts/imx6q-skov-revc-lt6.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-skov-revc-lt6.dts
diff --git a/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts
index a3f247c722b4..0342a79ccd5d 100644
--- a/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts
@@ -37,9 +37,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>;
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6q-solidsense.dts b/arch/arm/boot/dts/nxp/imx/imx6q-solidsense.dts
index 0e6a325df363..0e6a325df363 100644
--- a/arch/arm/boot/dts/imx6q-solidsense.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-solidsense.dts
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts
index 8daef65d5bb3..5353a0c24420 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts
@@ -49,7 +49,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		blue {
+		led-blue {
 			label = "blue_status_led";
 			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
@@ -90,11 +90,16 @@
 		ssi-controller = <&ssi1>;
 	};
 
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "On-board SPDIF";
-		spdif-controller = <&spdif>;
-		spdif-out;
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>;
 	};
 };
 
@@ -141,6 +146,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sgtl5000>;
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
diff --git a/arch/arm/boot/dts/imx6q-tqma6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-tqma6a.dtsi
index ab4c07c13a13..ab4c07c13a13 100644
--- a/arch/arm/boot/dts/imx6q-tqma6a.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tqma6a.dtsi
diff --git a/arch/arm/boot/dts/imx6q-tqma6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-tqma6b.dtsi
index 7224c376c318..7224c376c318 100644
--- a/arch/arm/boot/dts/imx6q-tqma6b.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tqma6b.dtsi
diff --git a/arch/arm/boot/dts/imx6q-ts4900.dts b/arch/arm/boot/dts/nxp/imx/imx6q-ts4900.dts
index dce1e8671ebe..dce1e8671ebe 100644
--- a/arch/arm/boot/dts/imx6q-ts4900.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-ts4900.dts
diff --git a/arch/arm/boot/dts/imx6q-ts7970.dts b/arch/arm/boot/dts/nxp/imx/imx6q-ts7970.dts
index 570bd3c309a6..570bd3c309a6 100644
--- a/arch/arm/boot/dts/imx6q-ts7970.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-ts7970.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts
new file mode 100644
index 000000000000..d630c572c704
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&backlight {
+	pwms = <&pwm2 0 500000 0>;
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&lcd_panel {
+	compatible = "edt,etm0700g0edh6";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts
new file mode 100644
index 000000000000..01ac3493fa32
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010/-1030 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&ipu2 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts
new file mode 100644
index 000000000000..1013025cb2d5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&backlight {
+	pwms = <&pwm2 0 500000 0>;
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&lcd_panel {
+	compatible = "edt,etm0700g0edh6";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts
new file mode 100644
index 000000000000..5dd8f1642db3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1020 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts
new file mode 100644
index 000000000000..ffa79c0eb05a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6q-tx6q-1036.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1036 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts
new file mode 100644
index 000000000000..1346fd663d68
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1036 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts
new file mode 100644
index 000000000000..eac07d5944cc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6q-tx6q-1010.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010/-1030 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts
new file mode 100644
index 000000000000..c485da35d333
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1110/-1130 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts
new file mode 100644
index 000000000000..53304fc3a90b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6q-tx6q-1110.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/nxp/imx/imx6q-udoo.dts
index 52e9f4a211d0..52e9f4a211d0 100644
--- a/arch/arm/boot/dts/imx6q-udoo.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-udoo.dts
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts
index d16ff2083d62..aae81feee00d 100644
--- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts
@@ -89,7 +89,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -296,7 +296,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170B9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100B9
@@ -307,7 +307,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170F9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100F9
diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts
index 63550351340d..0225a621ec7a 100644
--- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts
@@ -18,7 +18,7 @@
 
 	backlight_lvds: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
+		pwms = <&pwm2 0 50000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 248>;
 		default-brightness-level = <7>;
 		status = "okay";
@@ -28,7 +28,7 @@
 		compatible = "gpio-keys";
 		autorepeat;
 
-		back {
+		key-back {
 			gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 			label = "Key Back";
@@ -37,7 +37,7 @@
 			wakeup-source;
 		};
 
-		home {
+		key-home {
 			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 			label = "Key Home";
@@ -46,7 +46,7 @@
 			wakeup-source;
 		};
 
-		menu {
+		key-menu {
 			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
 			label = "Key Menu";
@@ -203,7 +203,6 @@
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
new file mode 100644
index 000000000000..18a620832a2a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for Variscite MX6 Carrier-board
+ *
+ * Copyright 2016 Variscite, Ltd. All Rights Reserved
+ * Copyright 2022 Bootlin
+ */
+
+/dts-v1/;
+
+#include "imx6qdl-var-som.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Variscite i.MX6 QUAD/DUAL VAR-SOM-MX6 Custom Board";
+	compatible = "variscite,mx6customboard", "variscite,var-som-imx6q", "fsl,imx6q";
+
+	panel0: lvds-panel0 {
+		compatible = "panel-lvds";
+		backlight = <&backlight_lvds>;
+		width-mm = <152>;
+		height-mm = <91>;
+		label = "etm070001adh6";
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <32000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hback-porch = <39>;
+			hfront-porch = <39>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			hsync-len = <47>;
+			vsync-len = <2>;
+		};
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	panel1: lvds-panel1 {
+		compatible = "panel-lvds";
+		width-mm = <152>;
+		height-mm = <91>;
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <38251000>;
+			hactive = <800>;
+			vactive = <600>;
+			hback-porch = <112>;
+			hfront-porch = <32>;
+			vback-porch = <3>;
+			vfront-porch = <17>;
+			hsync-len = <80>;
+			vsync-len = <4>;
+		};
+
+		port {
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 248>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3p3v>;
+		touchscreen-size-x = <880>;
+		touchscreen-size-y = <1280>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5306";
+		reg = <0x38>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <1800>;
+		touchscreen-size-y = <1000>;
+	};
+};
+
+&iomuxc {
+	pinctrl_camera: cameragrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC		0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg_var: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17071
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-vicut1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-vicut1.dts
index dd91aff3f9e2..dd91aff3f9e2 100644
--- a/arch/arm/boot/dts/imx6q-vicut1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-vicut1.dts
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-wandboard-revb1.dts
index f6ccbecff92c..f6ccbecff92c 100644
--- a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-wandboard-revb1.dts
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-wandboard-revd1.dts
index 55331021d80c..55331021d80c 100644
--- a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-wandboard-revd1.dts
diff --git a/arch/arm/boot/dts/imx6q-wandboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-wandboard.dts
index 0be548beef86..0be548beef86 100644
--- a/arch/arm/boot/dts/imx6q-wandboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-wandboard.dts
diff --git a/arch/arm/boot/dts/imx6q-yapp4-crux.dts b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-crux.dts
index 15f4824a5142..bddf3822ebf7 100644
--- a/arch/arm/boot/dts/imx6q-yapp4-crux.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-crux.dts
@@ -33,6 +33,10 @@
 	status = "okay";
 };
 
+&reg_pu {
+	regulator-always-on;
+};
+
 &reg_usb_h1_vbus {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts
new file mode 100644
index 000000000000..ec6651ba4ba2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Pegasus i.MX6Quad board";
+	compatible = "ysoft,imx6q-yapp4-pegasus", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_pu {
+	regulator-always-on;
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-zii-rdu2.dts
index a1c5e69d81ba..a1c5e69d81ba 100644
--- a/arch/arm/boot/dts/imx6q-zii-rdu2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-zii-rdu2.dts
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q.dtsi
index 3b77eae40e39..df86049a695b 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q.dtsi
@@ -163,6 +163,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x40000>;
+			ranges = <0 0x00900000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis-v1.2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis-v1.2.dtsi
new file mode 100644
index 000000000000..83fa04fc9f18
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis-v1.2.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+&i2c2 {
+	/delete-node/ stmpe811@41;
+
+	ad7879_ts: touchscreen@2c {
+		compatible = "adi,ad7879-1";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio4>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+	};
+
+	tla2024_adc: adc@49 {
+		compatible = "ti,tla2024";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Apalis AN1_ADC0 */
+		channel@4 {
+			reg = <4>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+
+		/* Apalis AN1_ADC1 */
+		channel@5 {
+			reg = <5>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+
+		/* Apalis AN1_ADC2 */
+		channel@6 {
+			reg = <6>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+
+		/* Apalis AN1_TSWIP_ADC3 */
+		channel@7 {
+			reg = <7>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
index 7c17b91f0965..5fcd7cdb7001 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
@@ -10,7 +10,13 @@
 
 / {
 	model = "Toradex Apalis iMX6Q/D Module";
-	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
+
+	aliases {
+		mmc0 = &usdhc3; /* eMMC */
+		mmc1 = &usdhc1; /* MMC1 slot */
+		mmc2 = &usdhc2; /* SD1 slot */
+		/delete-property/ mmc3;
+	};
 
 	/* Will be filled by the bootloader */
 	memory@10000000 {
@@ -41,7 +47,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		wakeup {
+		key-wakeup {
 			debounce-interval = <10>;
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 			label = "Wake-Up";
@@ -101,6 +107,11 @@
 		};
 	};
 
+	poweroff {
+		compatible = "regulator-poweroff";
+		cpu-supply = <&vgen2_reg>;
+	};
+
 	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
 		regulator-always-on;
@@ -166,7 +177,7 @@
 	reg_usb_host_vbus: regulator-usb-host-vbus {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
 		regulator-max-microvolt = <5000000>;
@@ -184,17 +195,26 @@
 			"MIC_IN", "Mic Jack",
 			"Mic Jack", "Mic Bias",
 			"Headphone Jack", "HP_OUT";
-		model = "imx6q-apalis-sgtl5000";
+		model = "apalis-imx6";
 		mux-ext-port = <4>;
 		mux-int-port = <1>;
 		ssi-controller = <&ssi1>;
 	};
 
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_in: spdif-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+	};
+
 	sound_spdif: sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
-		spdif-out;
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>, <&spdif_in>;
 		model = "imx-spdif";
 		status = "disabled";
 	};
@@ -220,10 +240,6 @@
 	status = "disabled";
 };
 
-&clks {
-	fsl,pmic-stby-poweroff;
-};
-
 /* Apalis SPI1 */
 &ecspi1 {
 	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
@@ -511,7 +527,6 @@
 
 	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
-		fsl,pmic-stby-poweroff;
 		reg = <0x08>;
 
 		regulators {
@@ -619,7 +634,6 @@
 		blocks = <0x5>;
 		id = <0>;
 		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
 		interrupt-parent = <&gpio4>;
 		irq-trigger = <0x1>;
 		pinctrl-names = "default";
@@ -634,7 +648,7 @@
 		/* ADC conversion time: 80 clocks */
 		st,sample-time = <4>;
 
-		stmpe_ts: stmpe_touchscreen {
+		stmpe_ts: touchscreen {
 			compatible = "st,stmpe-ts";
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
@@ -649,10 +663,9 @@
 			st,settling = <3>;
 			/* 5 ms touch detect interrupt delay */
 			st,touch-det-delay = <5>;
-			status = "disabled";
 		};
 
-		stmpe_adc: stmpe_adc {
+		stmpe_adc: adc {
 			compatible = "st,stmpe-adc";
 			#io-channel-cells = <1>;
 			/* forbid to use ADC channels 3-0 (touch) */
@@ -676,7 +689,7 @@
 
 	adv_7280: adv7280@21 {
 		compatible = "adi,adv7280";
-		adv,force-bt656-4;
+		adi,force-bt656-4;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu1_csi0>;
 		reg = <0x21>;
@@ -824,7 +837,6 @@
 };
 
 &usbotg {
-	disable-over-current;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg>;
 	status = "disabled";
diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6.dtsi
index b78ed7974ea9..b78ed7974ea9 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi
index 2577eb4f535a..9e97ef5e43f2 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi
@@ -13,7 +13,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 191000>;
+		pwms = <&pwm3 0 191000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <0>;
 		power-supply = <&reg_5v>;
@@ -121,11 +121,16 @@
 		mux-ext-port = <3>;
 	};
 
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-out;
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>;
 	};
 };
 
@@ -181,6 +186,7 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
@@ -211,7 +217,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos.dtsi
new file mode 100644
index 000000000000..acb404c6828b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos.dtsi
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * support fot the imx6 based aristainetos board
+ *
+ * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	tmp103: tmp103@71 {
+		compatible = "ti,tmp103";
+		reg = <0x71>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&ecspi4 {
+	cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usbotg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog &pinctrl_gpio>;
+
+	pinctrl_aristainetos_usbh1_vbus: aristainetos-usbh1-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0>;
+	};
+
+	pinctrl_aristainetos_usbotg_vbus: aristainetos-usbotg-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b0
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24  0x100b1
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20  0x100b1
+			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO  0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC    0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN   0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER   0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN  0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
+			>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x1b0b0
+			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+			MX6QDL_PAD_SD4_DAT5__GPIO2_IO13	0x1b0b0
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03	0x1b0b0
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x1b0b0
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b0b0
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x1b0b0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x10
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu_disp: ipudisp1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20			0x20000
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+			>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
index 6b64b2fc3995..01d4ea20b13d 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * support for the imx6 based aristainetos2 board
  *
  * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/imx6qdl-clock.h>
@@ -46,7 +10,7 @@
 / {
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
@@ -150,6 +114,8 @@
 		reg = <0x58>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <04 0x8>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
 
 		regulators {
 			bcore1 {
@@ -301,12 +267,12 @@
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
 
-	eeprom@50{
+	eeprom@50 {
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 	};
 
-	eeprom@57{
+	eeprom@57 {
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 	};
@@ -324,8 +290,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethphy: ethernet-phy {
+		ethphy: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
 			txd0-skew-ps = <0>;
 			txd1-skew-ps = <0>;
 			txd2-skew-ps = <0>;
@@ -346,7 +313,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -414,7 +380,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio>;
 
-	pinctrl_audmux: audmux {
+	pinctrl_audmux: audmuxgrp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
 			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
@@ -507,7 +473,7 @@
 		>;
 	};
 
-	pinctrl_gpmi_nand: gpmi-nand {
+	pinctrl_gpmi_nand: gpminandgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
 			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
@@ -600,11 +566,11 @@
 		>;
 	};
 
-	pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus {
+	pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbusgrp {
 		fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>;
 	};
 
-	pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus {
+	pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbusgrp {
 		fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>;
 	};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri-v1.2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri-v1.2.dtsi
new file mode 100644
index 000000000000..d11bf911b728
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri-v1.2.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+&i2c2 {
+	/delete-node/ stmpe811@41;
+
+	ad7879_ts: touchscreen@2c {
+		compatible = "adi,ad7879-1";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio6>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+	};
+
+	tla2024_adc: adc@49 {
+		compatible = "ti,tla2024";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Colibri AIN0 */
+		channel@4 {
+			reg = <4>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+
+		/* Colibri AIN1 */
+		channel@5 {
+			reg = <5>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+
+		/* Colibri AIN2 */
+		channel@6 {
+			reg = <6>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+
+		/* Colibri AIN3 */
+		channel@7 {
+			reg = <7>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
index 023e76215064..419d85b5a660 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
@@ -10,7 +10,13 @@
 
 / {
 	model = "Toradex Colibri iMX6DL/S Module";
-	compatible = "toradex,colibri_imx6dl", "fsl,imx6dl";
+
+	aliases {
+		mmc0 = &usdhc3; /* eMMC */
+		mmc1 = &usdhc1; /* MMC/SD Slot */
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
+	};
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
@@ -24,14 +30,21 @@
 		status = "disabled";
 	};
 
+	extcon_usbc_det: usbc-det {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbc_det>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		wakeup {
+		key-wakeup {
 			debounce-interval = <10>;
-			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
+			gpios = <&gpio2 22 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
 			label = "Wake-Up";
 			linux,code = <KEY_WAKEUP>;
 			wakeup-source;
@@ -105,7 +118,7 @@
 
 	reg_usb_host_vbus: regulator-usb-host-vbus {
 		compatible = "regulator-fixed";
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */
+		gpio = <&gpio3 31 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
 		regulator-max-microvolt = <5000000>;
@@ -122,18 +135,27 @@
 			"LINE_IN", "Line In Jack",
 			"MIC_IN", "Mic Jack",
 			"Mic Jack", "Mic Bias";
-		model = "imx6dl-colibri-sgtl5000";
+		model = "colibri-imx6";
 		mux-int-port = <1>;
 		mux-ext-port = <5>;
 		ssi-controller = <&ssi1>;
 	};
 
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_in: spdif-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+	};
+
 	/* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */
 	sound_spdif: sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
-		spdif-out;
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>, <&spdif_in>;
 		model = "imx-spdif";
 		status = "disabled";
 	};
@@ -536,7 +558,6 @@
 		blocks = <0x5>;
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio6>;
-		interrupt-controller;
 		id = <0>;
 		irq-trigger = <0x1>;
 		pinctrl-names = "default";
@@ -551,7 +572,7 @@
 		/* ADC converstion time: 80 clocks */
 		st,sample-time = <4>;
 
-		stmpe_ts: stmpe_touchscreen {
+		stmpe_ts: touchscreen {
 			compatible = "st,stmpe-ts";
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
@@ -566,7 +587,6 @@
 			st,settling = <3>;
 			/* 5 ms touch detect interrupt delay */
 			st,touch-det-delay = <5>;
-			status = "disabled";
 		};
 
 		stmpe_adc: stmpe_adc {
@@ -670,9 +690,15 @@
 	status = "disabled";
 };
 
+/* Colibri USBH */
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+};
+
+/* Colibri USBC */
 &usbotg {
-	disable-over-current;
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	extcon = <0>, <&extcon_usbc_det>;
 	status = "disabled";
 };
 
@@ -986,7 +1012,7 @@
 
 	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
 		fsl,pins = <
-			/* USBH_EN */
+			/* SODIMM 129 / USBH_PEN */
 			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x0f058
 		>;
 	};
@@ -1055,7 +1081,7 @@
 
 	pinctrl_usbc_det: usbcdetgrp {
 		fsl,pins = <
-			/* USBC_DET */
+			/* SODIMM 137 / USBC_DET */
 			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
 			/* USBC_DET_OVERWRITE */
 			MX6QDL_PAD_RGMII_RXC__GPIO6_IO30	0x0f058
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi
new file mode 100644
index 000000000000..c504cf7e9492
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi
@@ -0,0 +1,272 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 9 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_ir>;
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
+
+		led-1 {
+			active-low;
+			label = "imx6:red:front";
+			max-brightness = <248>;
+			pwms = <&pwm1 0 50000 0>;
+		};
+	};
+
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
+
+	v_usb2: regulator-v-usb2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "Integrated SPDIF";
+		/* IMX6 doesn't implement this yet */
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_gpio_key>;
+		pinctrl-names = "default";
+
+		button-0 {
+			label = "Button 0";
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_i2c3>;
+
+	status = "okay";
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_cubox_i_hdmi: cubox-i-hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_cubox_i_i2c2: cubox-i-i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_cubox_i_i2c3: cubox-i-i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_cubox_i_ir: cubox-i-irgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
+		>;
+	};
+
+	pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-ledgrp {
+		fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
+	};
+
+	pinctrl_cubox_i_spdif: cubox-i-spdifgrp {
+		fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
+	};
+
+	pinctrl_cubox_i_usbh1: cubox-i-usbh1grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
+	};
+
+	pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
+	};
+
+	pinctrl_cubox_i_usbotg: cubox-i-usbotggrp {
+		/*
+		 * The Cubox-i pulls ID low, but as it's pointless
+		 * leaving it as a pull-up, even if it is just 10uA.
+		 */
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+		>;
+	};
+
+	pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
+	};
+
+	pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-auxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
+		>;
+	};
+
+	pinctrl_cubox_i_usdhc2: cubox-i-usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+		>;
+	};
+
+	pinctrl_gpio_key: gpio-keygrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08	0x17059
+		>;
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_spdif>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
+	vbus-supply = <&v_usb2>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
+	vbus-supply = <&v_usb1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
+	vmmc-supply = <&vcc_3v3>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&vcc_3v3 {
+	vin-supply = <&v_5v0>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dfi-fs700-m60.dtsi
new file mode 100644
index 000000000000..f560a6b7779a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dfi-fs700-m60.dtsi
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	dummy_reg: regulator-dummy {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy-supply";
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 0>;
+		enable-active-high;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf040b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	status = "okay";
+	phy-mode = "rgmii";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* card detect */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
+		>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 { /* module slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc3 { /* baseboard slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+};
+
+&usdhc4 { /* eMMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-drc02.dtsi
index 702cd4a1b2e6..702cd4a1b2e6 100644
--- a/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-drc02.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2.dtsi
index fe72650295a5..d7c2b30aecfd 100644
--- a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2.dtsi
@@ -56,7 +56,6 @@
 	};
 
 	gpio-keys {
-		#size-cells = <0>;
 		compatible = "gpio-keys";
 
 		button-0 {
@@ -144,6 +143,7 @@
 	panel {
 		backlight = <&display_bl>;
 		compatible = "edt,etm0700g0edh6";
+		power-supply = <&reg_panel_3v3>;
 
 		port {
 			lcd_panel_in: endpoint {
@@ -152,6 +152,25 @@
 		};
 	};
 
+	/* Filtered supply voltage */
+	reg_pdk2_24v: regulator-pdk2-24v {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <24000000>;
+		regulator-min-microvolt = <24000000>;
+		regulator-name = "24V_PDK2";
+	};
+
+	/* 560-200 U1 */
+	reg_panel_3v3: regulator-panel-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3V3_PANEL";
+		vin-supply = <&reg_pdk2_24v>;
+	};
+
 	sound {
 		audio-codec = <&sgtl5000>;
 		audio-routing =
@@ -332,37 +351,4 @@
 			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0xb1 /* Int */
 		>;
 	};
-
-	pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x38
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x38
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x38
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x38
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x38
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x38
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x38
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x38
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x38
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x38
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x38
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x38
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x38
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x38
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x38
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x38
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x38
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x38
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x38
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x38
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x38
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x38
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x38
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x38
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x38
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x38
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x38
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x38
-		>;
-	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-picoitx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-picoitx.dtsi
index 4cd4cb9543c8..4cd4cb9543c8 100644
--- a/arch/arm/boot/dts/imx6qdl-dhcom-picoitx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-picoitx.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-som.dtsi
index 5befbe13d1a3..af0d95396cd5 100644
--- a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-som.dtsi
@@ -256,7 +256,6 @@
 				regulator-max-microvolt = <1527272>;
 				regulator-min-microvolt = <787500>;
 				regulator-ramp-delay = <7000>;
-				regulator-suspend-mem-microvolt = <1040000>;
 			};
 
 			sw2_reg: sw2 {
@@ -275,7 +274,6 @@
 				regulator-max-microvolt = <1527272>;
 				regulator-min-microvolt = <787500>;
 				regulator-ramp-delay = <7000>;
-				regulator-suspend-mem-microvolt = <980000>;
 			};
 
 			sw4_reg: sw4 {
@@ -667,6 +665,39 @@
 		>;
 	};
 
+	pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x38
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x38
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x38
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x38
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x38
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x38
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x38
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x38
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x38
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x38
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x38
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x38
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x38
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x38
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x38
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x38
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x38
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x38
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x38
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x38
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x38
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x38
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x38
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x38
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x38
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x38
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x38
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x38
+		>;
+	};
+
 	pinctrl_pcie: pcie-grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1 /* Wake */
diff --git a/arch/arm/boot/dts/imx6qdl-ds.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ds.dtsi
index f7e517555697..99ebd4dd63e8 100644
--- a/arch/arm/boot/dts/imx6qdl-ds.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ds.dtsi
@@ -253,7 +253,7 @@
 		>;
 	};
 
-	pinctrl_ecspi1_gpio: ecspi1grpgpiogrp {
+	pinctrl_ecspi1_gpio: ecspi1gpiogrp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
 			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x1b0b0
@@ -349,7 +349,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_gpio: usdhc1grpgpiogrp {
+	pinctrl_usdhc1_gpio: usdhc1gpiogrp {
 		fsl,pins = <
 			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
 		>;
@@ -366,7 +366,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
 			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
diff --git a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi
index c4e146f3341b..5587069b6052 100644
--- a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 or MIT)
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 //
 // Copyright (C) 2018 emtrion GmbH
 //
@@ -54,7 +54,7 @@
 	clk_codec: clock-codec {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency  = <12000000>;
+		clock-frequency = <12000000>;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
index 7228b894a763..9f4e746beb2d 100644
--- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 or MIT)
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 //
 // Copyright (C) 2018 emtrion GmbH
 //
@@ -33,7 +33,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_emcon_wake>;
 
-		wake {
+		key-wake {
 			label = "Wake";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
@@ -46,14 +46,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_som_leds>;
 
-		green {
+		led-green {
 			label = "som:green";
 			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "on";
 		};
 
-		red {
+		led-red {
 			label = "som:red";
 			gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
@@ -66,7 +66,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_lvds_bl>;
 		enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
-		pwms = <&pwm1 0 50000>;
+		pwms = <&pwm1 0 50000 0>;
 		brightness-levels = <
 			0 4 8 16 32 64 80 96 112
 			128 144 160 176 250
@@ -78,7 +78,7 @@
 	pwm_fan: pwm-fan {
 		compatible = "pwm-fan";
 		#cooling-cells = <2>;
-		pwms = <&pwm4 0 50000>;
+		pwms = <&pwm4 0 50000 0>;
 		cooling-levels = <0 64 127 191 255>;
 		status = "disabled";
 	};
@@ -145,7 +145,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rgb_bl>;
 		enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
-		pwms = <&pwm3 0 5000000>;
+		pwms = <&pwm3 0 5000000 0>;
 		brightness-levels = <
 			250 176 160 144 128 112
 			96 80 64 48 32 16 8 1
@@ -226,6 +226,7 @@
 		interrupt-parent = <&gpio2>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
@@ -331,7 +332,6 @@
 };
 
 &iomuxc {
-
 	pinctrl_audmux: audmuxgrp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
@@ -383,79 +383,79 @@
 		>;
 	};
 
-	pinctrl_emcon_gpio1: emcongpio1 {
+	pinctrl_emcon_gpio1: emcongpio1grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D0__GPIO2_IO00			0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_gpio2: emcongpio2 {
+	pinctrl_emcon_gpio2: emcongpio2grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D1__GPIO2_IO01			0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_gpio3: emcongpio3 {
+	pinctrl_emcon_gpio3: emcongpio3grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D2__GPIO2_IO02			0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_gpio4: emcongpio4 {
+	pinctrl_emcon_gpio4: emcongpio4grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D3__GPIO2_IO03			0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_gpio5: emcongpio5 {
+	pinctrl_emcon_gpio5: emcongpio5grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D4__GPIO2_IO04			0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_gpio6: emcongpio6 {
+	pinctrl_emcon_gpio6: emcongpio6grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D5__GPIO2_IO05			0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_gpio7: emcongpio7 {
+	pinctrl_emcon_gpio7: emcongpio7grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D6__GPIO2_IO06			0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_gpio8: emcongpio8 {
+	pinctrl_emcon_gpio8: emcongpio8grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D7__GPIO2_IO07			0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_irq_a: emconirqa {
+	pinctrl_emcon_irq_a: emconirqagrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07		0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_irq_b: emconirqb {
+	pinctrl_emcon_irq_b: emconirqbgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15		0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_irq_c: emconirqc {
+	pinctrl_emcon_irq_c: emconirqcgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16		0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_irq_pwr: emconirqpwr {
+	pinctrl_emcon_irq_pwr: emconirqpwrgrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D23__GPIO3_IO23			0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_wake: emconwake {
+	pinctrl_emcon_wake: emconwakegrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_DA2__GPIO3_IO02			0x1b0b1
 		>;
@@ -504,13 +504,13 @@
 		>;
 	};
 
-	pinctrl_irq_touch1: irqtouch1 {
+	pinctrl_irq_touch1: irqtouch1grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_5__GPIO1_IO05			0x0b0b1
 		>;
 	};
 
-	pinctrl_irq_touch2: irqtouch2 {
+	pinctrl_irq_touch2: irqtouch2grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31			0x0b0b1
 		>;
@@ -553,7 +553,7 @@
 		>;
 	};
 
-	pinctrl_pwm_fan: pwmfan {
+	pinctrl_pwm_fan: pwmfangrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD4_DAT2__PWM4_OUT			0x0b0b1
 		>;
@@ -566,7 +566,7 @@
 		>;
 	};
 
-	pinctrl_rgb_bl_en: rgbenable {
+	pinctrl_rgb_bl_en: rgbenablegrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD4_CMD__GPIO7_IO09			0x0b0b1
 		>;
@@ -618,13 +618,13 @@
 		>;
 	};
 
-	pinctrl_spdif_in: spdifin {
+	pinctrl_spdif_in: spdifingrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_16__SPDIF_IN			0x1b0b0
 		>;
 	};
 
-	pinctrl_spdif_out: spdifout {
+	pinctrl_spdif_out: spdifoutgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_19__SPDIF_OUT			0x13091
 		>;
@@ -737,17 +737,14 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi
index 069c27fab432..beff5a0f58ab 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi
@@ -24,13 +24,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -44,21 +44,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -71,14 +71,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
@@ -156,6 +156,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -270,7 +271,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi
index b1df2beb2832..9d3ba4083216 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi
@@ -25,7 +25,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -33,13 +33,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -53,21 +53,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -80,20 +80,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -137,6 +137,16 @@
 		regulator-always-on;
 	};
 
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can1>;
+		regulator-name = "can1_stby";
+		gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_usb_otg_vbus: regulator-usb-otg-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_otg_vbus";
@@ -170,6 +180,7 @@
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
 	status = "okay";
 };
 
@@ -219,6 +230,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -339,7 +351,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -444,6 +456,7 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_1p8v>;
 		VDDIO-supply = <&reg_3p3v>;
@@ -473,7 +486,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
+			timing0: timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -508,7 +521,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -612,7 +624,6 @@
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
 			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
 		>;
 	};
 
@@ -702,6 +713,12 @@
 		>;
 	};
 
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
@@ -745,7 +762,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
@@ -758,7 +775,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi
index a0710d562766..7e84e0a52ef3 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi
@@ -25,7 +25,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -33,13 +33,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -53,21 +53,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -80,20 +80,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -129,6 +129,16 @@
 		regulator-always-on;
 	};
 
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can1>;
+		regulator-name = "can1_stby";
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_usb_h1_vbus: regulator-usb-h1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_h1_vbus";
@@ -170,6 +180,7 @@
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
 	status = "okay";
 };
 
@@ -212,6 +223,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -338,7 +350,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -441,6 +453,7 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_1p8v>;
 		VDDIO-supply = <&reg_3p3v>;
@@ -470,7 +483,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
+			timing0: timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -505,7 +518,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -600,7 +612,6 @@
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
 			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
 		>;
 	};
 
@@ -691,6 +702,12 @@
 		>;
 	};
 
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
@@ -734,7 +751,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
@@ -747,7 +764,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi
index cda48bf2f168..81394d47dd68 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi
@@ -26,7 +26,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -34,13 +34,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -54,21 +54,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -81,20 +81,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -114,47 +114,47 @@
 		status = "okay";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
 
-		reg_1p0v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "1P0V";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can1>;
+		regulator-name = "can1_stby";
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
-		reg_usb_h1_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		reg_usb_otg_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	sound-analog {
@@ -177,7 +177,7 @@
 	pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSDIR |
@@ -189,7 +189,7 @@
 		>;
 	};
 
-	aud5 {
+	mux-aud5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -200,6 +200,7 @@
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
 	status = "okay";
 };
 
@@ -338,8 +339,6 @@
 
 		fan-controller@2c {
 			compatible = "gw,gsc-fan";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0x2c>;
 		};
 	};
@@ -377,7 +376,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -389,7 +388,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
@@ -500,6 +499,7 @@
 	sgtl5000: audio-codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&sw4_reg>;
 		VDDIO-supply = <&reg_3p3v>;
@@ -529,7 +529,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
+			timing0: timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -570,7 +570,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default", "state_dio";
 	pinctrl-0 = <&pinctrl_pwm4_backlight>;
 	pinctrl-1 = <&pinctrl_pwm4_dio>;
@@ -687,7 +686,6 @@
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
 			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
 		>;
 	};
 
@@ -772,20 +770,26 @@
 		>;
 	};
 
-	pinctrl_pwm4_backlight: pwm4grpbacklight {
+	pinctrl_pwm4_backlight: pwm4backlightgrp {
 		fsl,pins = <
 			/* LVDS_PWM J6.5 */
 			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
 		>;
 	};
 
-	pinctrl_pwm4_dio: pwm4grpdio {
+	pinctrl_pwm4_dio: pwm4diogrp {
 		fsl,pins = <
 			/* DIO3 J16.4 */
 			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
 		>;
 	};
 
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
@@ -829,7 +833,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
@@ -842,7 +846,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi
index 435dec6338fe..6136a95b9259 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -68,13 +26,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -88,21 +46,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -115,7 +73,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
 			default-state = "on";
@@ -171,7 +129,7 @@
 	pinctrl-0 = <&pinctrl_audmux>; /* AUD5<->tda1997x */
 	status = "okay";
 
-	ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSDIR |
@@ -183,7 +141,7 @@
 		>;
 	};
 
-	aud5 {
+	mux-aud5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -221,6 +179,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -329,7 +288,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi
index 2e61102ae694..9c822ca23130 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi
@@ -25,13 +25,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -45,21 +45,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -72,20 +72,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -146,6 +146,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -260,7 +261,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi
index 4662408b225a..552114a69f5b 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -66,13 +24,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -86,21 +44,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -113,14 +71,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
@@ -184,6 +142,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -298,7 +257,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -704,7 +663,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
@@ -717,7 +676,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi
index 4bc4371e6bae..ea92b2b5c50d 100644
--- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -66,7 +24,7 @@
 
 	backlight-display {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <
 			0  1  2  3  4  5  6  7  8  9
 			10 11 12 13 14 15 16 17 18 19
@@ -92,13 +50,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -112,21 +70,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -139,20 +97,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -296,6 +254,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -584,7 +543,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
+			timing0: timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -619,7 +578,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -632,7 +590,6 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
 	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
@@ -898,7 +855,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
@@ -911,7 +868,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi
index 1fdb7ba630f1..b518bcb6b7a9 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -56,7 +14,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <
 			0  1  2  3  4  5  6  7  8  9
 			10 11 12 13 14 15 16 17 18 19
@@ -76,13 +34,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -96,21 +54,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -123,7 +81,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -237,6 +195,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -486,7 +445,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: g101evn010 {
+			timing0: timing-g101evn010 {
 				clock-frequency = <68930000>;
 				hactive = <1280>;
 				vactive = <800>;
@@ -502,7 +461,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -681,7 +639,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x4001b0b0 /* EMMY_EN */
 			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x4001b0b0 /* EMMY_CFG1# */
@@ -711,7 +669,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
 			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
@@ -724,7 +682,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
 			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
@@ -753,7 +711,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
@@ -769,7 +727,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
index 612b6e068e28..3df4d345da98 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -52,6 +10,11 @@
 / {
 	/* these are used by bootloader for disabling nodes */
 	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
+		ethernet3 = &lan3;
+		ethernet4 = &lan4;
 		led0 = &led0;
 		led1 = &led1;
 		led2 = &led2;
@@ -65,7 +28,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -73,13 +36,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -93,21 +56,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -120,20 +83,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -212,34 +175,72 @@
 			compatible = "marvell,mv88e6085";
 			reg = <0>;
 
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sw_phy0: ethernet-phy@0 {
+					reg = <0x0>;
+				};
+
+				sw_phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+
+				sw_phy2: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+
+				sw_phy3: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+			};
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				lan4: port@0 {
 					reg = <0>;
 					label = "lan4";
+					phy-handle = <&sw_phy0>;
+					phy-mode = "internal";
+					local-mac-address = [00 00 00 00 00 00];
 				};
 
-				port@1 {
+				lan3: port@1 {
 					reg = <1>;
 					label = "lan3";
+					phy-handle = <&sw_phy1>;
+					phy-mode = "internal";
+					local-mac-address = [00 00 00 00 00 00];
 				};
 
-				port@2 {
+				lan2: port@2 {
 					reg = <2>;
 					label = "lan2";
+					phy-handle = <&sw_phy2>;
+					phy-mode = "internal";
+					local-mac-address = [00 00 00 00 00 00];
 				};
 
-				port@3 {
+				lan1: port@3 {
 					reg = <3>;
 					label = "lan1";
+					phy-handle = <&sw_phy3>;
+					phy-mode = "internal";
+					local-mac-address = [00 00 00 00 00 00];
 				};
 
 				port@5 {
 					reg = <5>;
-					label = "cpu";
 					ethernet = <&fec>;
+					phy-mode = "rgmii-id";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
 				};
 			};
 		};
@@ -259,6 +260,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -508,7 +510,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
+			timing0: timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -543,7 +545,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -775,7 +776,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
@@ -791,7 +792,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi
index fcd3bdfd6182..87fdc9e2a727 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi
@@ -24,13 +24,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -44,21 +44,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -71,14 +71,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
@@ -156,6 +156,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -270,7 +271,7 @@
 		pagesize = <16>;
 	};
 
-	ds1672@68 {
+	rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi
index 68e5ab2e27e2..099ed2f94d61 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi
@@ -27,13 +27,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -47,21 +47,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -74,20 +74,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -165,6 +165,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -326,7 +327,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <13 0>;
-		interrupt-names = "INT1";
 	};
 };
 
@@ -630,7 +630,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
@@ -643,7 +643,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi
index 0415bcb41640..cbca5e58e812 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi
@@ -25,13 +25,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -45,21 +45,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -72,20 +72,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -243,8 +243,6 @@
 
 		fan-controller@a {
 			compatible = "gw,gsc-fan";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0x0a>;
 		};
 	};
@@ -309,7 +307,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <13 0>;
-		interrupt-names = "INT1";
 	};
 };
 
@@ -572,7 +569,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
@@ -585,7 +582,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi
index 8e23cec7149e..4e4dce5adc15 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi
@@ -24,13 +24,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -44,21 +44,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -71,14 +71,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
@@ -141,6 +141,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi
new file mode 100644
index 000000000000..6b737360a532
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi
@@ -0,0 +1,375 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	aliases {
+		rtc0 = &carrier_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>;
+	};
+
+	v_3v2: regulator-v-3v2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_3v2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
+
+	v_sd: regulator-v-sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_vmmc>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_sd";
+		startup-delay-us = <1000>;
+		vin-supply = <&v_3v2>;
+	};
+
+	v_usb2: regulator-v-usb2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
+	};
+
+	audio: sound-sgtl5000 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board Codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Microphone", "Headphone Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Headphone Jack",
+			"Headphone Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "On-board SPDIF";
+		/* IMX6 doesn't implement this yet */
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>;
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	mux-pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
+	status = "okay";
+
+	/* Pro baseboard model */
+	carrier_rtc: rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	/* Pro baseboard model */
+	sgtl5000: codec@a {
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>;
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		VDDA-supply = <&v_3v2>;
+		VDDIO-supply = <&v_3v2>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_hummingboard_flexcan1: hummingboard-flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000
+			MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000
+		>;
+	};
+
+	pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1
+		>;
+	};
+
+	pinctrl_hummingboard_hdmi: hummingboard-hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_hummingboard_i2c1: hummingboard-i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_hummingboard_i2c2: hummingboard-i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_hummingboard_pcie_reset: hummingboard-pcie-resetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1
+		>;
+	};
+
+	pinctrl_hummingboard_pwm1: pwm1grp {
+		fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>;
+	};
+
+	pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+			MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
+			MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
+			MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+		>;
+	};
+
+	pinctrl_hummingboard_spdif: hummingboard-spdifgrp {
+		fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
+	};
+
+	pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
+	};
+
+	pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-idgrp {
+		/*
+		 * We want it pulled down for a fixed host connection.
+		 */
+		fsl,pins = <MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059>;
+	};
+
+	pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
+	};
+
+	pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-auxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
+		>;
+	};
+
+	pinctrl_hummingboard_usdhc2: hummingboard-usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+		>;
+	};
+	pinctrl_hummingboard_vmmc: hummingboard-vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>;
+	reset-gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	 pinctrl-names = "default";
+	 pinctrl-0 = <&pinctrl_hummingboard_pwm1>;
+	 status = "okay";
+};
+
+&pwm2 {
+	 status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&v_usb2>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
+	vbus-supply = <&v_usb1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_hummingboard_usdhc2_aux
+		&pinctrl_hummingboard_usdhc2
+	>;
+	vmmc-supply = <&v_sd>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&vcc_3v3 {
+	vin-supply = <&v_3v2>;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2-emmc.dtsi
index f400405381a7..c3efb001c515 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2-emmc.dtsi
@@ -42,22 +42,20 @@
  */
 
 &iomuxc {
-	hummingboard2 {
-		pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3 {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
-				MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
-			>;
-		};
+	pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+			MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+		>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi
new file mode 100644
index 000000000000..3069e1738ba2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi
@@ -0,0 +1,580 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	aliases {
+		rtc0 = &pcf8523;
+		rtc1 = &snvs_rtc;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio7 9 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>;
+		linux,rc-map-name = "rc-rc6-mce";
+	};
+
+	v_3v2: regulator-v-3v2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_3v2";
+	};
+
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
+
+	vcc_1p8: regulator-vcc-1p8 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vcc_1p8";
+		vin-supply = <&v_3v2>;
+	};
+
+	v_sd: regulator-v-sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_vmmc>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_sd";
+		startup-delay-us = <1000>;
+		vin-supply = <&v_3v2>;
+	};
+
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb2: regulator-v-usb2 {
+		/* USB hub port 1 */
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb3: regulator-v-usb3 {
+		/* USB hub port 3 */
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb3";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb4: regulator-v-usb4 {
+		/* USB hub port 4 */
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb4";
+		vin-supply = <&v_5v0>;
+	};
+
+	audio: sound-sgtl5000 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board Codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	mux-pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_i2c1>;
+	status = "okay";
+
+	pcf8523: rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sgtl5000: codec@a {
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>;
+		reg = <0x0a>;
+		VDDA-supply = <&v_3v2>;
+		VDDD-supply = <&vcc_1p8>;
+		VDDIO-supply = <&v_3v2>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/*
+			 * 36 pin headers GPIO description. The pins
+			 * numbering as following -
+			 *
+			 * 	3.2v	5v	74	75
+			 *	73	72	71	70
+			 *	69	68	67	66
+			 *
+			 *	77	78	79	76
+			 *	65	64	61	60
+			 *	53	52	51	50
+			 *	49	48	166	132
+			 *	95	94	90	91
+			 *	GND	54	24	204
+			 *
+			 * The GPIO numbers can be extracted using
+			 * signal name from below.
+			 * Example -
+			 * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is
+			 * GPIO(3,10) which is (3-1)*32+10 = gpio 74
+			 *
+			 * i.e. The mapping of GPIO(X,Y) to Linux gpio
+			 * number is : gpio number = (X-1) * 32 + Y
+			 */
+			/* DI1_PIN15 */
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1
+			/* DI1_PIN02 */
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1
+			/* DISP1_DATA00 */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1
+			/* DISP1_DATA01 */
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1
+			/* DISP1_DATA02 */
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1
+			/* DISP1_DATA03 */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1
+			/* DISP1_DATA04 */
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1
+			/* DISP1_DATA05 */
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1
+			/* DISP1_DATA06 */
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1
+			/* DISP1_DATA07 */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1
+			/* DI1_D0_CS */
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1
+			/* DI1_D1_CS */
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1
+			/* DI1_PIN01 */
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1
+			/* DI1_PIN03 */
+			MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1
+			/* DISP1_DATA08 */
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1
+			/* DISP1_DATA09 */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1
+			/* DISP1_DATA10 */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1
+			/* DISP1_DATA11 */
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1
+			/* DISP1_DATA12 */
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1
+			/* DISP1_DATA13 */
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1
+			/* DISP1_DATA14 */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1
+			/* DISP1_DATA15 */
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1
+			/* DISP1_DATA16 */
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1
+			/* DISP1_DATA17 */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1
+			/* DISP1_DATA18 */
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1
+			/* DISP1_DATA19 */
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1
+			/* DISP1_DATA20 */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1
+			/* DISP1_DATA21 */
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1
+			/* DISP1_DATA22 */
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1
+			/* DISP1_DATA23 */
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1
+			/* DI1_DISP_CLK */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1
+			/* SPDIF_IN */
+			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1
+			/* SPDIF_OUT */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1
+
+			/* MikroBUS GPIO pin number 10 */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1
+		>;
+	};
+
+	pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x000b1 /* CS */
+		>;
+	};
+
+	pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000
+		>;
+	};
+
+	pinctrl_hummingboard2_hdmi: hummingboard2-hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_hummingboard2_i2c1: hummingboard2-i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_hummingboard2_i2c2: hummingboard2-i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_hummingboard2_i2c3: hummingboard2-i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_hummingboard2_mipi: hummingboard2_mipigrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
+		>;
+	};
+
+	pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-resetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1
+		>;
+	};
+
+	pinctrl_hummingboard2_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_hummingboard2_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+			MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
+			MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
+			MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+		>;
+	};
+
+	pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
+	};
+
+	pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>;
+	};
+
+	pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>;
+	};
+
+	pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-idgrp {
+		/*
+		 * We want it pulled down for a fixed host connection.
+		 */
+		fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+	};
+
+	pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
+	};
+
+	pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-auxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
+		>;
+	};
+
+	pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+		>;
+	};
+
+	pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9
+		>;
+	};
+
+	pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9
+		>;
+	};
+
+	pinctrl_hummingboard2_vmmc: hummingboard2-vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+		>;
+	};
+
+	pinctrl_hummingboard2_uart3: hummingboard2-uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_RX_DATA	0x40013000
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_pcie_reset>;
+	reset-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_pwm3>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>;
+	vbus-supply = <&v_usb1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <
+		&pinctrl_hummingboard2_usdhc2_aux
+		&pinctrl_hummingboard2_usdhc2
+	>;
+	pinctrl-1 = <
+		&pinctrl_hummingboard2_usdhc2_aux
+		&pinctrl_hummingboard2_usdhc2_100mhz
+	>;
+	pinctrl-2 = <
+		&pinctrl_hummingboard2_usdhc2_aux
+		&pinctrl_hummingboard2_usdhc2_200mhz
+	>;
+	vmmc-supply = <&v_sd>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_uart3>;
+	status = "okay";
+};
+
+&vcc_3v3 {
+	vin-supply = <&v_3v2>;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-1.5.dtsi
index 0fd7f2e24d9c..0fd7f2e24d9c 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-1.5.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-rqs.dtsi
index a4217f564a53..dff184a119f3 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-rqs.dtsi
@@ -118,7 +118,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	audmux_ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSDIR |
@@ -130,7 +130,7 @@
 		>;
 	};
 
-	audmux_aud4 {
+	mux-aud4 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -262,7 +262,7 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	vmcc-supply = <&reg_sd3_vmmc>;
+	vmmc-supply = <&reg_sd3_vmmc>;
 	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	no-1-8-v;
@@ -274,7 +274,7 @@
 	pinctrl-0 = <&pinctrl_usdhc4>;
 	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
-	vmcc-supply = <&reg_sd4_vmmc>;
+	vmmc-supply = <&reg_sd4_vmmc>;
 	bus-width = <8>;
 	no-1-8-v;
 	non-removable;
@@ -397,7 +397,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170B1
 			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100B1
@@ -408,7 +408,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170F9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100F9
@@ -434,7 +434,7 @@
 		>;
 	};
 
-	pinctrl_usdhc4_100mhz: usdhc4grp_100mhz {
+	pinctrl_usdhc4_100mhz: usdhc4-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x170B1
 			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x100B1
@@ -449,7 +449,7 @@
 		>;
 	};
 
-	pinctrl_usdhc4_200mhz: usdhc4grp_200mhz {
+	pinctrl_usdhc4_200mhz: usdhc4-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x170F9
 			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x100F9
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore.dtsi
index 23c318d9636f..9975b6ee433d 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore.dtsi
@@ -20,7 +20,7 @@
 
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 100000>;
+		pwms = <&pwm3 0 100000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -109,7 +109,7 @@
 	status = "okay";
 
 
-	audmux_ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSDIR |
@@ -121,7 +121,7 @@
 		>;
 	};
 
-	audmux_aud4 {
+	mux-aud4 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -245,7 +245,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi
new file mode 100644
index 000000000000..b4a79245b7b6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree include for the Kontron SMARC-sAMX6i board on a SMARC Eval
+ * 2.0 carrier (ADS2).
+ *
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sound {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out Jack",
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"Line Out Jack", "LINEOUTR",
+			"Line Out Jack", "LINEOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"IN1L", "Line In Jack",
+			"IN1R", "Line In Jack",
+			"Microphone Jack", "MICBIAS",
+			"IN2L", "Microphone Jack",
+			"IN2R", "Microphone Jack";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&wm8904>;
+		};
+	};
+
+	reg_codec_mic: regulator-codec-mic {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MIC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_codec_1p8v: regulator-codec-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8_S0_CODEC";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&ecspi4 {
+	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+	};
+};
+
+&fec {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	wm8904: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_codec_1p8v>;
+		CPVDD-supply = <&reg_codec_1p8v>;
+		DBVDD-supply = <&reg_codec_1p8v>;
+		DCVDD-supply = <&reg_codec_1p8v>;
+		MICVDD-supply = <&reg_codec_mic>;
+	};
+};
+
+&i2c3 {
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi
index 095c9143d99a..c771f87b10df 100644
--- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi
@@ -51,24 +51,26 @@
 		vin-supply = <&reg_3p3v_s5>;
 	};
 
-	reg_3p3v_s0: regulator-3p3v-s0 {
+	reg_3p3v_s5: regulator-3p3v-s5 {
 		compatible = "regulator-fixed";
-		regulator-name = "V_3V3_S0";
+		regulator-name = "V_3V3_S5";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 		regulator-boot-on;
-		vin-supply = <&reg_3p3v_s5>;
+		vin-supply = <&reg_smarc_suppy>;
 	};
 
-	reg_3p3v_s5: regulator-3p3v-s5 {
+	reg_sdio: regulator-sdio {
 		compatible = "regulator-fixed";
-		regulator-name = "V_3V3_S5";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_sdio>;
+		regulator-name = "V_3V3_SD";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_smarc_suppy>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <20000>;
 	};
 
 	reg_smarc_lcdbklt: regulator-smarc-lcdbklt {
@@ -147,7 +149,7 @@
 		status = "disabled";
 	};
 
-	i2c_intern: i2c-gpio-intern {
+	i2c_intern: i2c-0 {
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_gpio_intern>;
@@ -158,7 +160,7 @@
 		#size-cells = <0>;
 	};
 
-	i2c_lcd: i2c-gpio-lcd {
+	i2c_lcd: i2c-1 {
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_gpio_lcd>;
@@ -170,7 +172,7 @@
 		status = "disabled";
 	};
 
-	i2c_cam: i2c-gpio-cam {
+	i2c_cam: i2c-2 {
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_gpio_cam>;
@@ -188,7 +190,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_audmux>;
 
-	audmux_ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT3) |
@@ -200,7 +202,7 @@
 		>;
 	};
 
-	audmux_adu3 {
+	mux-aud3 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT3>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -208,7 +210,7 @@
 		>;
 	};
 
-	audmux_ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT2_SSI1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
@@ -220,7 +222,7 @@
 		>;
 	};
 
-	audmux_adu4 {
+	mux-aud4 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -254,12 +256,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
-		   <&gpio3 29 GPIO_ACTIVE_LOW>;
+		   <&gpio3 29 GPIO_ACTIVE_LOW>,
+		   <&gpio3 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	/* default boot source: workaround #1 for errata ERR006282 */
 	smarc_flash: flash@0 {
-		compatible = "winbond,w25q16dw", "jedec,spi-nor";
+		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <20000000>;
 	};
@@ -269,8 +272,24 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-connection-type = "rgmii-id";
+	phy-handle = <&ethphy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
 };
 
 &i2c_intern {
@@ -350,10 +369,6 @@
 				regulator-always-on;
 			};
 
-			/*
-			 * Per schematics, of all VGEN's, only VGEN5 has some
-			 * usage ... but even that - over DNI resistor
-			 */
 			vgen1 {
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1550000>;
@@ -374,8 +389,7 @@
 				regulator-max-microvolt = <3300000>;
 			};
 
-			reg_2p5v_s0: vgen5 {
-				regulator-name = "V_2V5_S0";
+			vgen5 {
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 			};
@@ -397,7 +411,7 @@
 
 /* HDMI_CTRL */
 &i2c2 {
-	clock-frequency = <375000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 };
@@ -458,6 +472,8 @@
 			MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
 			/* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */
 			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+			/* SPI4_CS3# - connected to SMARC SPI0_CS1# */
+			MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
 		>;
 	};
 
@@ -510,7 +526,7 @@
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b0b0 /* RST_GBE0_PHY# */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x1b0b0 /* RST_GBE0_PHY# */
 		>;
 	};
 
@@ -636,6 +652,12 @@
 		>;
 	};
 
+	pinctrl_reg_sdio: reg-sdiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* SDIO_PWR_EN */
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
@@ -688,7 +710,6 @@
 
 			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 /* CD */
 			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 /* WP */
-			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PWR_EN */
 		>;
 	};
 
@@ -707,7 +728,7 @@
 		>;
 	};
 
-	pinctrl_wdog1: wdog1rp {
+	pinctrl_wdog1: wdog1grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_9__WDOG1_B	0x1b0b0
 		>;
@@ -722,8 +743,7 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>;
-	reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio3 13 GPIO_ACTIVE_LOW>;
 };
 
 /* LCD_BKLT_PWM */
@@ -791,12 +811,12 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_sdio>;
 	no-1-8-v;
 };
 
 /* SDMMC */
 &usdhc4 {
-	/* Internal eMMC, optional on some boards */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
 	bus-width = <8>;
@@ -805,11 +825,13 @@
 	non-removable;
 	vmmc-supply = <&reg_3p3v_s0>;
 	vqmmc-supply = <&reg_1p8v_s0>;
+	status = "okay";
 };
 
 &wdog1 {
 	/* CPLD is feeded by watchdog (hardwired) */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
index f4dca20669d6..ee2c6bec92e8 100644
--- a/arch/arm/boot/dts/imx6qdl-mba6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
@@ -36,21 +36,21 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpiobuttons>;
 
-		button1 {
+		button-1 {
 			label = "s6";
 			linux,code = <KEY_F6>;
 			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
 			wakeup-source;
 		};
 
-		button2 {
+		button-2 {
 			label = "s7";
 			linux,code = <KEY_F7>;
 			gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 			wakeup-source;
 		};
 
-		button3 {
+		button-3 {
 			label = "s8";
 			linux,code = <KEY_F8>;
 			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
@@ -106,11 +106,25 @@
 		vin-supply = <&reg_mba6_3p3v>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x14000000>;
+			alloc-ranges = <0x10000000 0x20000000>;
+			linux,cma-default;
+		};
+	};
+
 	sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_audmux>;
-		model = "imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
 		ssi-controller = <&ssi1>;
 		audio-codec = <&tlv320aic32x4>;
 		audio-asrc = <&asrc>;
@@ -129,7 +143,7 @@
 &audmux {
 	status = "okay";
 
-	ssi0 {
+	mux-ssi0 {
 		fsl,audmux-port = <MX31_AUDMUX_PORT1_SSI0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -141,7 +155,7 @@
 		>;
 	};
 
-	aud3 {
+	mux-aud3 {
 		fsl,audmux-port = <MX31_AUDMUX_PORT3_SSI_PINS_3>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -192,6 +206,13 @@
 	};
 };
 
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
 &i2c1 {
 	tlv320aic32x4: audio-codec@18 {
 		compatible = "ti,tlv320aic32x4";
@@ -205,10 +226,22 @@
 	};
 };
 
+/* DDC */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_recovery>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
 	reset-gpio = <&gpio6 7 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
 	status = "okay";
 };
 
@@ -244,7 +277,6 @@
 	status = "okay";
 };
 
-
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
@@ -272,6 +304,23 @@
 &usbh1 {
 	disable-over-current;
 	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@1 {
+		compatible = "usb424,2517";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&reg_mba6_3p3v>;
+
+		ethernet@1 {
+			compatible = "usb424,9e00";
+			reg = <1>;
+			nvmem-cells = <&mba_mac_address>;
+			nvmem-cell-names = "mac-address";
+		};
+	};
 };
 
 &usbotg {
@@ -396,10 +445,17 @@
 		>;
 	};
 
-	pinctrl_hog: hoggrp {
+	pinctrl_hdmi: hdmigrp {
+		/* NOTE: DDC is done via I2C2, so DON'T
+		 * configure DDC pins for HDMI!
+		 */
 		fsl,pins = <
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
 
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
 			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
 			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099
 			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099
@@ -432,6 +488,20 @@
 		>;
 	};
 
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b899
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b899
+		>;
+	};
+
+	pinctrl_i2c2_recovery: i2c2recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b899
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b899
+		>;
+	};
+
 	pinctrl_pcie: pciegrp {
 		fsl,pins = <
 			/* HYS = 1, DSE = 110, 100k up, SPEED = HIGH (11)*/
@@ -443,21 +513,21 @@
 
 	pinctrl_pwm1: pwm1grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050
 		>;
 	};
 
 	pinctrl_pwm3: pwm3grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050
 		>;
 	};
 
 	pinctrl_pwm4: pwm4grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050
 		>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi
new file mode 100644
index 000000000000..aca320ee8f47
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>, <&pinctrl_enet_fix>;
+};
+
+&i2c1 {
+	lm75: temperature-sensor@49 {
+		compatible = "national,lm75a";
+		reg = <0x49>;
+		vs-supply = <&reg_mba6_3p3v>;
+	};
+
+	m24c64_57: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_mba6_3p3v>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mba_mac_address: mac-address@20 {
+				reg = <0x20 0x6>;
+			};
+		};
+	};
+
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi
new file mode 100644
index 000000000000..c7bbd6195fef
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	lm75: temperature-sensor@49 {
+		compatible = "national,lm75a";
+		reg = <0x49>;
+		vs-supply = <&reg_mba6_3p3v>;
+	};
+
+	m24c64_57: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_mba6_3p3v>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mba_mac_address: mac-address@20 {
+				reg = <0x20 0x6>;
+			};
+		};
+	};
+
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
new file mode 100644
index 000000000000..8d471450d5c5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
@@ -0,0 +1,570 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlan_vmmc: regulator-wlan-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan_vmmc>;
+		regulator-name = "reg_wlan_vmmc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-home {
+			label = "Home";
+			gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
+			linux,code = <102>;
+		};
+
+		key-back {
+			label = "Back";
+			gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
+			linux,code = <158>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-j14-pin1 {
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-j14-pin3 {
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-j14-pins8-9 {
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-j46-pin2 {
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-j46-pin3 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+	};
+
+	backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6dl-nit6xlite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6dl-nit6xlite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
+
+	rtc@6f {
+		compatible = "isil,isl1208";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reg = <0x6f>;
+		interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_j10>;
+	pinctrl-1 = <&pinctrl_j28>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			/* Phy reset */
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			/* Home Button: J14 pin 5 */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+			/* Back Button: J14 pin 7 */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+			/* Touch IRQ: J7 pin 4 */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+			/* tcs2004 IRQ */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27	0x1b0b0
+			/* tsc2004 reset */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x0b0b0
+		>;
+	};
+
+	pinctrl_j10: j10grp {
+		fsl,pins = <
+			/* Broadcom WiFi module pins */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x0b0b0
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+			MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+		>;
+	};
+
+	pinctrl_j28: j28grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x0b0b0
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x0b0b0
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x030b0
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x0b0b0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_wlan_vmmc: wlan-vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b0
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b0
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+		>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
new file mode 100644
index 000000000000..c727aac257f9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
@@ -0,0 +1,832 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xF0000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlan_vmmc: regulator-wlan-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan_vmmc>;
+		regulator-name = "reg_wlan_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_xcvr>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		key-home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key-back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	i2c-mux-2 {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH
+			     &gpio4 15 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c2>;
+		idle-state = <0>;
+
+		i2c2mux@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c-mux-3 {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c3>;
+		idle-state = <0>;
+
+		i2c3mux@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-speaker-enable {
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-ttymxc4-rs232 {
+			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+			retain-state-suspended;
+			default-state = "on";
+		};
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds1: backlight-lvds1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	panel-lvds1 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds1>;
+
+		port {
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-nitrogen6_max-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "microcrystal,rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rv4162>;
+		reg = <0x68>;
+		interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_can_xcvr: can-xcvrgrp {
+		fsl,pins = <
+			/* Flexcan XCVR enable */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			/* Phy reset */
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			/* Power Button */
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+			/* Menu Button */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+			/* Home Button */
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+			/* Back Button */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+			/* Volume Up Button */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+			/* Volume Down Button */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2mux: i2c2muxgrp {
+		fsl,pins = <
+			/* ov5642 camera i2c enable */
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x000b0
+			/* ov5640_mipi camera i2c enable */
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15	0x000b0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3mux: i2c3muxgrp {
+		fsl,pins = <
+			/* PCIe I2C enable */
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
+		>;
+	};
+
+	pinctrl_j15: j15grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* PCIe reset */
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x000b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_rv4162: rv4162grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x130b1
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x030b1
+			/* RS485 RX Enable: pull up */
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b1
+			/* RS485 DEN: pull down */
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b1
+			/* RS485/!RS232 Select: pull down (rs232) */
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x030b1
+			/* ON: pull down */
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x030b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x0b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x100b0
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_wlan_vmmc: wlan-vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
+			MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&reg_1p8v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
index ee7e2371f94b..806af7f60419 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
@@ -17,7 +17,7 @@
 
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -26,7 +26,7 @@
 
 	backlight_lvds0: backlight-lvds0 {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -47,38 +47,38 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		menu {
+		key-menu {
 			label = "Menu";
 			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
@@ -263,6 +263,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
@@ -285,6 +286,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sgtl5000>;
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
@@ -639,7 +641,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -652,7 +653,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
new file mode 100644
index 000000000000..c71aa7498acf
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
@@ -0,0 +1,678 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 0>;
+		enable-active-high;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_xcvr>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_wlan_vmmc: regulator-wlan-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan_vmmc>;
+		regulator-name = "reg_wlan_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		key-home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key-back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-nitrogen6x-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-nitrogen6x-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "env";
+			reg = <0xc0000 0x2000>;
+		};
+
+		partition@c2000 {
+			label = "splash";
+			reg = <0xc2000 0x13e000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	rtc: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_can_xcvr: can-xcvrgrp {
+		fsl,pins = <
+			/* Flexcan XCVR enable */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			/* Phy reset */
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x000b0
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			/* Power Button */
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+			/* Menu Button */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+			/* Home Button */
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+			/* Back Button */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+			/* Volume Up Button */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+			/* Volume Down Button */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_j15: j15grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17071
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17071
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
+		>;
+	};
+
+	pinctrl_wlan_vmmc: wlan-vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
+			MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-av-02.dtsi
index 393475cb0f4d..0020dbb1722c 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-av-02.dtsi
@@ -64,7 +64,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <2 IRQ_TYPE_NONE>;
 		status = "disabled";
-        };
+	};
 };
 
 &ipu1_di0_disp0 {
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi
index 037b60197598..fc78acc9f5c5 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi
@@ -13,14 +13,14 @@
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 		status = "disabled";
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
 			wakeup-source;
 		};
 
-		sleep {
+		key-sleep {
 			label = "Sleep Button";
 			gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_SLEEP>;
@@ -35,19 +35,19 @@
 
 		user-led1 {
 			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
 		user-led2 {
 			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
 		user-led3 {
 			gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "on";
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-wlbt-05.dtsi
index 84f884d6e55b..08b2dd06580a 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-wlbt-05.dtsi
@@ -54,7 +54,7 @@
 };
 
 &iomuxc {
-	pinctrl_uart3_bt: uart3grp-bt {
+	pinctrl_uart3_bt: uart3-btgrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
 			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
@@ -66,7 +66,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_wl: usdhc3grp-wl {
+	pinctrl_usdhc3_wl: usdhc3-wlgrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
index 120d6e997a4c..a3c2811e9c6f 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
@@ -15,7 +15,7 @@
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_backlight>;
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		status = "okay";
 	};
 
@@ -25,17 +25,17 @@
 		pinctrl-0 = <&pinctrl_gpioleds>;
 		status = "disabled";
 
-		red {
+		led-red {
 			label = "phyboard-mira:red";
 			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "phyboard-mira:green";
 			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "phyboard-mira:blue";
 			gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
@@ -162,7 +162,7 @@
 		interrupts = <12 IRQ_TYPE_NONE>;
 		status = "disabled";
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			st,sample-time = <4>;
 			st,mod-12b = <1>;
@@ -182,7 +182,7 @@
 		pinctrl-0 = <&pinctrl_rtc_int>;
 		reg = <0x68>;
 		interrupt-parent = <&gpio7>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		status = "disabled";
 	};
 };
@@ -224,7 +224,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pbab01.dtsi
index 51d28e275aa6..e40041871b28 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pbab01.dtsi
@@ -10,22 +10,18 @@
 		stdout-path = &uart4;
 	};
 
-	regulators {
-		sound_1v8: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "i2s-audio-1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
+	sound_1v8: regulator-sound-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "i2s-audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
 
-		sound_3v3: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "i2s-audio-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
+	sound_3v3: regulator-sound-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "i2s-audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 
 	tlv320_mclk: oscillator {
@@ -75,7 +71,7 @@
 &audmux {
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -87,7 +83,7 @@
 		>;
 	};
 
-	pins5 {
+	mux-pins5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
new file mode 100644
index 000000000000..aa9a442852f4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 Quad";
+	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 15 0>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 0 0>;
+		enable-active-high;
+	};
+
+	gpio_leds: leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+		compatible = "gpio-leds";
+
+		led_green: led-green {
+			label = "phyflex:green";
+			gpios = <&gpio1 30 0>;
+		};
+
+		led_red: led-red {
+			label = "phyflex:red";
+			gpios = <&gpio2 31 0>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+
+	som_flash: flash@0 {
+		compatible = "m25p80", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&ethphy>;
+	phy-mode = "rgmii";
+	phy-reset-duration = <10>; /* in msecs */
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	phy-supply = <&vdd_eth_io_reg>;
+	status = "disabled";
+
+	fec_mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			txc-skew-ps = <1680>;
+			rxc-skew-ps = <1860>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	som_eeprom: eeprom@50 {
+		compatible = "catalyst,24c32", "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+
+	pmic@58 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		regulators {
+			vddcore_reg: bcore1 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vddsoc_reg: bcore2 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vdd_ddr3_reg: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_reg: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_buckmem_reg: bmem {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_reg: bio {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_io_reg: ldo4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_mx6_snvs_reg: ldo5 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_pmic_io_reg: ldo6 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_sd0_reg: ldo9 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_sd1_reg: ldo10 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_mx6_high_reg: ldo11 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+		};
+
+		da9063_rtc: rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		da9063_wdog: watchdog {
+			compatible = "dlg,da9063-watchdog";
+		};
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+			status = "disabled";
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+};
+
+&iomuxc {
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x80000000 /* CS0 */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x80000000 /* Reset GPIO */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000 /* Green LED */
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x80000000 /* Red LED */
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <MX6QDL_PAD_SD4_DAT1__GPIO2_IO09	0x80000000>; /* PMIC interrupt */
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x80000000
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_cdwp: usdhc3cdwpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT16__AUD5_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT17__AUD5_TXD	0x110b0
+			MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 17 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&reg_arm {
+	vin-supply = <&vddcore_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&vddsoc_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&vddsoc_reg>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "disabled";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "disabled";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd1_reg>;
+	status = "disabled";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3
+		     &pinctrl_usdhc3_cdwp>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd0_reg>;
+	status = "disabled";
+};
+
+&wdog1 {
+	/*
+	 * Rely on PMIC reboot handler. Internal i.MX6 watchdog, that is also
+	 * used for reboot, does not reset all external PMIC voltages on reset.
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
index 28a805384668..85e278eb2016 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
@@ -100,6 +100,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -309,3 +310,11 @@
 		>;
 	};
 };
+
+&wdog1 {
+	/*
+	 * Rely on PMIC reboot handler. Internal i.MX6 watchdog, that is also
+	 * used for reboot, does not reset all external PMIC voltages on reset.
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-dwarf.dtsi
index 3a968782e854..3a968782e854 100644
--- a/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-dwarf.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-hobbit.dtsi
index 144c4727fbc7..144c4727fbc7 100644
--- a/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-hobbit.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-nymph.dtsi
index 3d56a4216448..3d56a4216448 100644
--- a/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-nymph.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-pi.dtsi
index b823dce62e63..b823dce62e63 100644
--- a/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-pi.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi
index f7a56d6b160c..c39a9ebdaba1 100644
--- a/arch/arm/boot/dts/imx6qdl-pico.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi
@@ -233,7 +233,6 @@
 		pinctrl-0 = <&pinctrl_ov5645>;
 		reg = <0x3c>;
 		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-names = "xclk";
 		clock-frequency = <24000000>;
 		vdddo-supply = <&reg_1p8v>;
 		vdda-supply = <&reg_2p8v>;
diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-prti6q.dtsi
index f0db0d4471f4..36f84f4da6b0 100644
--- a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-prti6q.dtsi
@@ -69,6 +69,7 @@
 	vbus-supply = <&reg_usb_h1_vbus>;
 	phy_type = "utmi";
 	dr_mode = "host";
+	disable-over-current;
 	status = "okay";
 };
 
@@ -78,10 +79,18 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
-	disable-over-current;
+	over-current-active-low;
 	status = "okay";
 };
 
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi
new file mode 100644
index 000000000000..22d5918ee4d8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2014 FEDEVEL, Inc.
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led0: led-usr {
+			label = "usr";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6-rex-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6-rex-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pca9535: gpio-expander@27 {
+		compatible = "nxp,pca9535";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9535>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x030b0
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			/* CS */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x000b1
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
+			/* CS */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			/* Phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			/* user led */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000
+		>;
+	};
+
+	pinctrl_pca9535: pca9535grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x17059
+	   >;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x10b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x10b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			/* CD */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+			/* WP */
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1f0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			/* CD */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+			/* WP */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1f0b0
+		>;
+	};
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
new file mode 100644
index 000000000000..b9dde0af3b99
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
@@ -0,0 +1,866 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-user {
+			label = "debug";
+			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-home {
+			label = "Home";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		key-back {
+			label = "Back";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+
+		key-program {
+			label = "Program";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROGRAM>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	clocks {
+		codec_osc: anaclk2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24576000>;
+		};
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "cs42888_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can_en>;
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx6-sabreauto-cs42888",
+			"fsl,imx-audio-cs42888";
+		model = "imx-cs42888";
+		audio-cpu = <&esai>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Line Out Jack", "AOUT1L",
+			"Line Out Jack", "AOUT1R",
+			"Line Out Jack", "AOUT2L",
+			"Line Out Jack", "AOUT2R",
+			"Line Out Jack", "AOUT3L",
+			"Line Out Jack", "AOUT3R",
+			"Line Out Jack", "AOUT4L",
+			"Line Out Jack", "AOUT4R",
+			"AIN1L", "Line In Jack",
+			"AIN1R", "Line In Jack",
+			"AIN2L", "Line In Jack",
+			"AIN2R", "Line In Jack";
+	};
+
+	spdif_in: spdif-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-sabreauto-spdif",
+			     "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_in>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3mux>;
+		mux-gpios = <&gpio5 4 0>;
+		i2c-parent = <&i2c3>;
+		idle-state = <0>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			adv7180: camera@21 {
+				compatible = "adi,adv7180";
+				reg = <0x21>;
+				powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>;
+				interrupt-parent = <&gpio1>;
+				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+				port {
+					adv7180_to_ipu1_csi0_mux: endpoint {
+						remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+						bus-width = <8>;
+					};
+				};
+			};
+
+			max7310_a: gpio@30 {
+				compatible = "maxim,max7310";
+				reg = <0x30>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			max7310_b: gpio@32 {
+				compatible = "maxim,max7310";
+				reg = <0x32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_max7310>;
+				reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			};
+
+			max7310_c: gpio@34 {
+				compatible = "maxim,max7310";
+				reg = <0x34>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			light-sensor@44 {
+				compatible = "isil,isl29023";
+				reg = <0x44>;
+				interrupt-parent = <&gpio5>;
+				interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+			};
+
+			magnetometer@e {
+				compatible = "fsl,mag3110";
+				reg = <0x0e>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			accelerometer@1c {
+				compatible = "fsl,mma8451";
+				reg = <0x1c>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mma8451_int>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+			  <&clks IMX6QDL_PLL4_BYPASS>,
+			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
+				 <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	status = "disabled"; /* pin conflict with WEIM NOR */
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&esai {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esai>;
+	assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
+			  <&clks IMX6QDL_CLK_ESAI_EXTAL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "disabled"; /* pin conflict with fec */
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	codec: cs42888@48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&codec_osc>;
+		clock-names = "mclk";
+		VA-supply = <&reg_audio>;
+		VD-supply = <&reg_audio>;
+		VLS-supply = <&reg_audio>;
+		VLC-supply = <&reg_audio>;
+	};
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_egalax_int>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
+			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
+			MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
+		>;
+	};
+
+	pinctrl_egalax_int: egalax-intgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_esai: esaigrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
+			MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
+			MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
+			MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
+			MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
+			MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
+			MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
+			MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
+			MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
+			MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x17059
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x17059
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x17059
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x17059
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__GPIO1_IO11		0x1b0b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x1b0b0
+			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12		0x1b0b0
+			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b0
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3mux: i2c3muxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0b0b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0x1b0b0
+		>;
+	};
+
+	pinctrl_max7310: max7310grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0
+		>;
+	};
+
+	pinctrl_mma8451_int: mma8451intgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0xb0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_gpt_input_capture0: gptinputcapture0grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpt_input_capture1: gptinputcapture1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2	0x1b0b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_weim_cs0: weimcs0grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
+		>;
+	};
+
+	pinctrl_weim_nor: weimnorgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb060
+			MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
+			MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
+			MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
+			MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
+			MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
+			MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
+			MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
+			MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
+			MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
+			MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
+			MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
+			MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
+			MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
+			MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
+			MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
+			MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
+			MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
+			MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
+			MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
+			MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
+			MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
+			MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
+			MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
+			MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+		>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing-hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
+	ranges = <0 0 0x08000000 0x08000000>;
+	status = "disabled"; /* pin conflict with SPI NOR */
+
+	flash@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0 0x02000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+				0x0000c000 0x1404a38e 0x00000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
new file mode 100644
index 000000000000..f7abc17c7c93
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
@@ -0,0 +1,730 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ */
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 0>;
+		enable-active-high;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_xcvr>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	mipi_xclk: mipi_xclk {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <22000000>;
+		clock-output-names = "mipi_pwm3";
+		pwms = <&pwm3 0 45 0>; /* 1 / 45 ns = 22 MHz */
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		key-home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key-back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vync-active = <1>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ov5640: camera@40 {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x40>;
+		clocks = <&mipi_xclk>;
+		clock-names = "xclk";
+		DOVDD-supply = <&reg_1p8v>;
+		AVDD-supply = <&reg_2p8v>;
+		DVDD-supply = <&reg_1p5v>;
+		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* NANDF_D5 */
+		powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	ov5642: camera@42 {
+		compatible = "ovti,ov5642";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5642>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-names = "xclk";
+		reg = <0x42>;
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		gp-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		port {
+			ov5642_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_can_xcvr: can-xcvrgrp {
+		fsl,pins = <
+			/* Flexcan XCVR enable */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			/* Phy reset */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x000b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			/* Power Button */
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+			/* Menu Button */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+			/* Home Button */
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+			/* Back Button */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+			/* Volume Up Button */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+			/* Volume Down Button */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x1b0b0
+		>;
+	};
+
+	pinctrl_j15: j15grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05   0x000b0
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0
+		>;
+	};
+
+	pinctrl_ov5642: ov5642grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06   0x1b0b0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08   0x130b0
+			MX6QDL_PAD_GPIO_3__CCM_CLKO2    0x000b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0	/* WP */
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
new file mode 100644
index 000000000000..e8368c6b27ef
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
@@ -0,0 +1,847 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply";
+		gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sensors: regulator-sensors {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sensors_reg>;
+		regulator-name = "sensors-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabresd-wm8962",
+			   "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-asrc = <&asrc>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC",
+			"DMIC", "MICBIAS",
+			"DMICDAT", "DMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+		hp-det-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
+		mic-det-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-red {
+			gpios = <&gpio1 2 0>;
+			default-state = "on";
+		};
+	};
+
+	panel {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vsync-active = <1>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0013 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x8014 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	accelerometer@1c {
+		compatible = "fsl,mma8451";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_mma8451_int>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&reg_sensors>;
+		vddio-supply = <&reg_sensors>;
+	};
+
+	ov5642: camera@3c {
+		compatible = "ovti,ov5642";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5642>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		reg = <0x3c>;
+		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
+						rev B board is VGEN5 */
+		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
+		powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5642_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
+	};
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
+						rev B board is VGEN5 */
+		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
+		powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	egalax_ts@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
+	};
+
+	magnetometer@e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+		vdd-supply = <&reg_sensors>;
+		vddio-supply = <&reg_sensors>;
+	};
+
+	light-sensor@44 {
+		compatible = "isil,isl29023";
+		reg = <0x44>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_isl29023_int>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&reg_sensors>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1b0b0
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_hp: hpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08          0x1b0b0
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_egalax_int: i2c2egalaxintgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16		0xb0b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+		>;
+	};
+
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20  0x1b0b0
+		>;
+	};
+
+	pinctrl_ov5642: ov5642grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie_reg: pciereggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_sensors_reg: sensorsreggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+			MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+			MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+			MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+		>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&reg_arm {
+       vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+       vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+       vin-supply = <&sw1c_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&vgen5_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&vgen5_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi
index 02e6d36e85fa..2daf2b6af884 100644
--- a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi
@@ -58,7 +58,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
@@ -83,7 +83,7 @@
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <4>;
 		power-supply = <&reg_3p3v>;
-		pwms = <&pwm1 0 10000>;
+		pwms = <&pwm1 0 10000 0>;
 	};
 
 	reg_3p3v: regulator-3p3v {
@@ -140,7 +140,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
new file mode 100644
index 000000000000..596b3bb3ddd1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/ {
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <65000>;
+		touchscreen-inverted-y;
+		touchscreen-swapped-x-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+};
+
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_touch>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI			0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO			0x000b1
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK			0x000b1
+			/* *no* external pull up */
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x40000058
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* external pull up */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x10040
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
index 3def1b621c8e..6ab71a729fd8 100644
--- a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
@@ -13,10 +13,14 @@
 	aliases {
 		can0 = &can1;
 		can1 = &can2;
+		ethernet0 = &fec;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
 		mdio-gpio0 = &mdio;
 		nand = &gpmi;
 		rtc0 = &i2c_rtc;
 		rtc1 = &snvs;
+		switch0 = &switch;
 		usb0 = &usbh1;
 		usb1 = &usbotg;
 	};
@@ -60,7 +64,7 @@
 		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>,
 			<&gpio1 22 GPIO_ACTIVE_HIGH>;
 
-		switch@0 {
+		switch: switch@0 {
 			compatible = "microchip,ksz8873";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_switch>;
@@ -73,13 +77,13 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				ports@0 {
+				lan1: ports@0 {
 					reg = <0>;
 					phy-mode = "internal";
 					label = "lan1";
 				};
 
-				ports@1 {
+				lan2: ports@1 {
 					reg = <1>;
 					phy-mode = "internal";
 					label = "lan2";
@@ -105,6 +109,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_3v3: regulator-3v3 {
@@ -232,13 +237,16 @@
 	};
 };
 
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-mode = "rmii";
 	phy-supply = <&reg_3v3>;
 	status = "okay";
@@ -274,7 +282,6 @@
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-revc-lt2.dtsi
index 48c9ce051f47..48c9ce051f47 100644
--- a/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-revc-lt2.dtsi
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-solidsense.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-solidsense.dtsi
new file mode 100644
index 000000000000..60e446ba8f52
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-solidsense.dtsi
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2021 Russell King <rmk@armlinux.org.uk>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_solidsense_leds>;
+
+		/* Red/Green LED1 - next to WiFi SMA */
+		led-11 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Red/Green LED2 - next to GPS SMA */
+		led-21 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-22 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&audio {
+	status = "disabled";
+};
+
+&ecspi2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>, <&pinctrl_solidsense_hog>;
+
+	pinctrl_solidsense_hog: solidsense-hoggrp {
+		fsl,pins = <
+			/* Nordic RESET_N */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x400130b1
+			/* Nordic Chip 1 SWDIO - GPIO 125 */
+			MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x400130b1
+			/* Nordic Chip 1 SWDCLK - GPIO 59 */
+			/* already claimed in the HB2 hogs */
+			/* MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 */
+			/* Nordic Chip 2 SWDIO - GPIO 81 */
+			MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x400130b1
+			/* Nordic Chip 2 SWCLK - GPIO 82 */
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x400130b1
+		>;
+	};
+
+	pinctrl_solidsense_leds: solidsense-ledsgrp {
+		fsl,pins = <
+			/* Red LED 1 - GPIO 58 */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x400130b1
+			/* Green LED 1 - GPIO 55 */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x400130b1
+			/* Red LED 2 - GPIO 57 */
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x400130b1
+			/* Green LED 2 - GPIO 56 */
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x400130b1
+		>;
+	};
+
+	pinctrl_solidsense_uart2: solidsense-uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_solidsense_uart3: solidsense-uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+};
+
+&pwm1 {
+	status = "disabled";
+};
+
+&sgtl5000 {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_solidsense_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_solidsense_uart3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-brcm.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-brcm.dtsi
new file mode 100644
index 000000000000..e491f5c9d455
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-brcm.dtsi
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	clk_brcm: brcm-clock {
+		compatible = "gpio-gate-clock";
+		#clock-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_brcm_osc>;
+		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_brcm: brcm-reg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 19 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	usdhc1_pwrseq: usdhc1_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>,
+			      <&gpio6 0 GPIO_ACTIVE_LOW>;
+		clocks = <&clk_brcm>;
+		clock-names = "ext_clock";
+	};
+};
+
+&iomuxc {
+	pinctrl_microsom_brcm_bt: microsom-brcm-btgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
+			MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x40013070
+			MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
+		>;
+	};
+
+	pinctrl_microsom_brcm_osc: microsom-brcm-oscgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x40013070
+		>;
+	};
+
+	pinctrl_microsom_brcm_reg: microsom-brcm-reggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x40013070
+		>;
+	};
+
+	pinctrl_microsom_brcm_wifi: microsom-brcm-wifigrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x40013070
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x40013070
+		>;
+	};
+
+	pinctrl_microsom_uart4: microsom-uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_microsom_usdhc1: microsom-usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+		>;
+	};
+};
+
+/* UART4 - Connected to optional BRCM Wifi/BT/FM */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-emmc.dtsi
index 5f3b8baab20f..ddca24414d26 100644
--- a/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-emmc.dtsi
@@ -40,22 +40,20 @@
  */
 
 &iomuxc {
-	microsom {
-		pinctrl_microsom_usdhc3: microsom-usdhc3 {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
-				MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
-			>;
-		};
+	pinctrl_microsom_usdhc3: microsom-usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+			MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+		>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-ti.dtsi
index 352ac585ca6b..cd1e682f11ad 100644
--- a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-ti.dtsi
@@ -76,56 +76,54 @@
 };
 
 &iomuxc {
-	microsom {
-		pinctrl_microsom_ti_bt: microsom-ti-bt {
-			fsl,pins = <
-				/* BT_EN_SOC */
-				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
-			>;
-		};
+	pinctrl_microsom_ti_bt: microsom-ti-btgrp {
+		fsl,pins = <
+			/* BT_EN_SOC */
+			MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
+		>;
+	};
 
-		pinctrl_microsom_ti_clk: microsom-ti-clk {
-			fsl,pins = <
-				/* EXT_32K */
-				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
-				/* WL_XTAL_PU (unrouted) */
-				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070
-			>;
-		};
+	pinctrl_microsom_ti_clk: microsom-ti-clkgrp {
+		fsl,pins = <
+			/* EXT_32K */
+			MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
+			/* WL_XTAL_PU (unrouted) */
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070
+		>;
+	};
 
-		pinctrl_microsom_ti_wifi_en: microsom-ti-wifi-en {
-			fsl,pins = <
-				/* WLAN_EN_SOC */
-				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
-			>;
-		};
+	pinctrl_microsom_ti_wifi_en: microsom-ti-wifi-engrp {
+		fsl,pins = <
+			/* WLAN_EN_SOC */
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
+		>;
+	};
 
-		pinctrl_microsom_ti_wifi_irq: microsom-ti-wifi-irq {
-			fsl,pins = <
-				/* WLAN_IRQ */
-				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
-			>;
-		};
+	pinctrl_microsom_ti_wifi_irq: microsom-ti-wifi-irqgrp {
+		fsl,pins = <
+			/* WLAN_IRQ */
+			MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
+		>;
+	};
 
-		pinctrl_microsom_uart4: microsom-uart4 {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
-			>;
-		};
+	pinctrl_microsom_uart4: microsom-uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+		>;
+	};
 
-		pinctrl_microsom_usdhc1: microsom-usdhc1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-			>;
-		};
+	pinctrl_microsom_usdhc1: microsom-usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+		>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi
new file mode 100644
index 000000000000..7af74b203e39
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "vcc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
+	phy-mode = "rgmii-id";
+
+	/*
+	 * The PHY seems to require a long-enough reset duration to avoid
+	 * some rare issues where the PHY gets stuck in an inconsistent and
+	 * non-functional state at boot-up. 10ms proved to be fine .
+	 */
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * The PHY can appear at either address 0 or 4 due to the
+		 * configuration (LED) pin not being pulled sufficiently.
+		 */
+		ethernet-phy@0 {
+			reg = <0>;
+			qca,clk-out-frequency = <125000000>;
+			qca,smarteee-tw-us-1g = <24>;
+		};
+
+		ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+			qca,smarteee-tw-us-1g = <24>;
+		};
+
+		/*
+		 * ADIN1300 (som rev 1.9 or later) is always at address 1. It
+		 * will be enabled automatically by U-Boot if detected.
+		 */
+		ethernet-phy@1 {
+			reg = <1>;
+			adi,phy-output-clock = "125mhz-free-running";
+			status = "disabled";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_microsom_enet_ar8035: microsom-enet-ar8035grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			/* AR8035 reset */
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0
+			/* AR8035 interrupt */
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
+			/* GPIO16 -> AR8035 25MHz */
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x13030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
+			/* AR8035 pin strapping: IO voltage: pull up */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			/* AR8035 pin strapping: PHYADDR#0: pull down */
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
+			/* AR8035 pin strapping: PHYADDR#1: pull down */
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+			/* AR8035 pin strapping: MODE#1: pull up */
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			/* AR8035 pin strapping: MODE#3: pull up */
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			/* AR8035 pin strapping: MODE#0: pull down */
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+
+			/*
+			 * As the RMII pins are also connected to RGMII
+			 * so that an AR8030 can be placed, set these
+			 * to high-z with the same pulls as above.
+			 * Use the GPIO settings to avoid changing the
+			 * input select registers.
+			 */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x03000
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x03000
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x03000
+		>;
+	};
+
+	pinctrl_microsom_uart1: microsom-uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_uart1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi
index 344ea935c7da..07492f63a1f8 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi
@@ -7,16 +7,6 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
-/ {
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "supply-3p3v";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
@@ -25,11 +15,16 @@
 
 	m25p80: flash@0 {
 		compatible = "jedec,spi-nor";
-		spi-max-frequency = <50000000>;
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		vcc-supply = <&sw4_reg>;
 		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
@@ -59,20 +54,6 @@
 		>;
 	};
 
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
-			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
-		>;
-	};
-
-	pinctrl_i2c3_recovery: i2c3recoverygrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899
-		>;
-	};
-
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */
@@ -133,7 +114,7 @@
 		};
 
 		sw4_reg: sw4 {
-			regulator-min-microvolt = <800000>;
+			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
@@ -197,7 +178,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	vmmc-supply = <&reg_3p3v>;
+	vmmc-supply = <&sw4_reg>;
 	non-removable;
 	disable-wp;
 	no-sd;
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi
index 7dc3f0005b0f..e8fd37dd8835 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 &fec {
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
@@ -26,15 +27,17 @@
 		reg = <0x08>;
 	};
 
-	sensor@48 {
-		compatible = "national,lm75";
+	temperature-sensor@48 {
+		compatible = "national,lm75a";
 		reg = <0x48>;
+		vs-supply = <&sw4_reg>;
 	};
 
 	eeprom@50 {
 		compatible = "st,24c64", "atmel,24c64";
 		reg = <0x50>;
 		pagesize = <32>;
+		vcc-supply = <&sw4_reg>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi
new file mode 100644
index 000000000000..0e404c1f62f2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_recovery>;
+	scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+		vs-supply = <&sw4_reg>;
+	};
+
+	eeprom@50 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&sw4_reg>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
+		>;
+	};
+
+	pinctrl_i2c3_recovery: i2c3recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi
index f88da757edda..f88da757edda 100644
--- a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi
index d6ba4b2a60f6..17f6a568f0e8 100644
--- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi
@@ -73,13 +73,13 @@
 			default-state = "off";
 		};
 
-		en-usb-5v {
+		en-usb-5v-led {
 			label = "en-usb-5v";
 			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		sel_dc_usb {
+		sel-dc-usb-led {
 			label = "sel_dc_usb";
 			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
@@ -192,6 +192,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
@@ -212,12 +213,12 @@
 	status = "okay";
 
 	m41t00s: rtc@68 {
-		compatible = "m41t00";
+		compatible = "st,m41t00";
 		reg = <0x68>;
 	};
 
 	isl12022: rtc@6f {
-		compatible = "isl,isl12022";
+		compatible = "isil,isl12022";
 		reg = <0x6f>;
 	};
 
@@ -234,6 +235,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sgtl5000>;
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
@@ -263,7 +265,7 @@
 		>;
 	};
 
-	pinctrl_ecspi2: ecspi2 {
+	pinctrl_ecspi2: ecspi2grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK      0x100b1
 			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI      0x100b1
@@ -278,7 +280,7 @@
 		>;
 	};
 
-	pinctrl_enet: enet {
+	pinctrl_enet: enetgrp {
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi
new file mode 100644
index 000000000000..cdeaca36867e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/ {
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd1_pwr>;
+		enable-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "edt,etm0700g0dh6";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_pwr>;
+		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		backlight = <&backlight>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_out>;
+			};
+		};
+	};
+
+	display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_1>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+
+		display-timings {
+			timing-vga {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-etv570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-et0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-et0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing-et0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-et0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-etq570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-comtft { /* same as ET0700 but with inverted pixel clock */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_in>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi
new file mode 100644
index 000000000000..63d09c01a3c6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/ {
+	aliases {
+		display = &lvds0;
+		lvds0 = &lvds0;
+		lvds1 = &lvds1;
+	};
+
+	backlight0: backlight0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_lcd0_pwr>;
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	backlight1: backlight1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		power-supply = <&reg_lcd1_pwr>;
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	lvds0_panel: lvds0-panel {
+		compatible = "nlt,nl12880bc20-spwg-24";
+		backlight = <&backlight0>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	lvds1_panel: lvds1-panel {
+		compatible = "nlt,nl12880bc20-spwg-24";
+		backlight = <&backlight1>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+};
+
+&kpp {
+	status = "disabled"; /* pad conflict with backlight1 PWM */
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+
+		display-timings {
+			timing-hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing-vga {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vfront-porch = <12>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <60>;
+				vsync-len = <13>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing-et0700 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-etv570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
+	lvds1: lvds-channel@1 {
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+
+		display-timings {
+			timing-hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing-vga {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vfront-porch = <12>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <60>;
+				vsync-len = <13>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_lcd0_pwr {
+	status = "okay";
+};
+
+&reg_lcd1_pwr {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi
new file mode 100644
index 000000000000..dd4e5bce4a55
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/ {
+	backlight0 {
+		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_lcd1_pwr>;
+	};
+
+	backlight1 {
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_lcd1_pwr>;
+	};
+
+	lcd-panel {
+		compatible = "edt,et057090dhu";
+		pixelclk-active = <0>;
+	};
+
+	lvds0-panel {
+		compatible = "edt,etml1010g0dka";
+		pixelclk-active = <0>;
+	};
+
+	lvds1-panel {
+		compatible = "edt,etml1010g0dka";
+		pixelclk-active = <0>;
+	};
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ds1339 {
+	/*
+	 * The backup voltage of the module internal RTC is not wired
+	 * by default on the MB7, so disable that RTC chip.
+	 */
+	status = "disabled";
+};
+
+&i2c3 {
+	rtc: rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&reg_lcd0_pwr {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
index f41f86a76ea9..57297d6521cf 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -70,9 +34,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		mclk: clock@0 {
+		mclk: clock {
 			compatible = "fixed-clock";
-			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <26000000>;
 		};
@@ -81,7 +44,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_POWER>;
@@ -92,7 +55,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		user_led: user {
+		user_led: led-user {
 			label = "Heartbeat";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_user_led>;
@@ -216,7 +179,7 @@
 &audmux {
 	status = "okay";
 
-	ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -228,7 +191,7 @@
 		>;
 	};
 
-	pins5 {
+	mux-pins5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -373,7 +336,7 @@
 		>;
 	};
 
-	pinctrl_disp0_1: disp0grp-1 {
+	pinctrl_disp0_1: disp0-1-grp {
 		fsl,pins = <
 			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
 			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
@@ -406,7 +369,7 @@
 		>;
 	};
 
-	pinctrl_disp0_2: disp0grp-2 {
+	pinctrl_disp0_2: disp0-2-grp {
 		fsl,pins = <
 			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
 			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-udoo.dtsi
new file mode 100644
index 000000000000..2be7dc4a9781
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-udoo.dtsi
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		backlight = &backlight;
+		panelchan = &panelchan;
+		panel7 = &panel7;
+		touchscreenp7 = &touchscreenp7;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpio1 4 0>;
+		default-on;
+		status = "disabled";
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio2 4 0>;
+		pinctrl-0 = <&pinctrl_power_off>;
+		pinctrl-names = "default";
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	panel7: panel7 {
+		/*
+		 * in reality it is a -20t (parallel) model,
+		 * but with LVDS bridge chip attached,
+		 * so it is equivalent to -19t model in drive
+		 * characteristics
+		 */
+		compatible = "urt,umsh-8596md-19t";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		power-supply = <&reg_panel>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	reg_panel: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_panel";
+		enable-active-high;
+		gpio = <&gpio1 2 0>;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-udoo-ac97",
+			     "fsl,imx-audio-ac97";
+		model = "fsl,imx6q-udoo-ac97";
+		audio-cpu = <&ssi1>;
+		audio-routing =
+			"RX", "Mic Jack",
+			"Headphone Jack", "TX";
+		mux-int-port = <1>;
+		mux-ext-port = <6>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreenp7: touchscreenp7@55 {
+		compatible = "sitronix,st1232";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreenp7>;
+		reg = <0x55>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 8>;
+		gpios = <&gpio1 15 0>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001f8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001f8b1
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x70
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x70
+		>;
+	};
+
+	pinctrl_power_off: poweroffgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x30
+		>;
+	};
+
+	pinctrl_touchscreenp7: touchscreenp7grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15		0x70
+			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh: usbhgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+			MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x17059
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_ac97_running: ac97runninggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
+			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x1b0b0
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+		>;
+	};
+
+	pinctrl_ac97_warm_reset: ac97warmresetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
+			MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+		>;
+	};
+
+	pinctrl_ac97_reset: ac97resetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
+			MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+		>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	panelchan: lvds-channel@0 {
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	usb-port@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&audmux {
+	status = "okay";
+};
+
+&ssi1 {
+	cell-index = <0>;
+	fsl,mode = "ac97-slave";
+	pinctrl-names = "ac97-running", "ac97-reset", "ac97-warm-reset";
+	pinctrl-0 = <&pinctrl_ac97_running>;
+	pinctrl-1 = <&pinctrl_ac97_reset>;
+	pinctrl-2 = <&pinctrl_ac97_warm_reset>;
+	ac97-gpios = <&gpio4 19 0 &gpio4 18 0 &gpio2 30 0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-dart.dtsi
index c41cac502bac..7749074e438d 100644
--- a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-dart.dtsi
@@ -39,7 +39,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -51,7 +51,7 @@
 		>;
 	};
 
-	aud3 {
+	mux-aud3 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -194,7 +194,7 @@
 };
 
 &iomuxc {
-	pinctrl_audmux: audmux {
+	pinctrl_audmux: audmuxgrp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
 			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
@@ -205,7 +205,7 @@
 		>;
 	};
 
-	pinctrl_bt: bt {
+	pinctrl_bt: btgrp {
 		fsl,pins = <
 			/* Bluetooth enable */
 			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b1
@@ -346,7 +346,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x170B9
 			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x100B9
@@ -357,7 +357,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x170F9
 			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x100F9
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
new file mode 100644
index 000000000000..2bff5f92242a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
@@ -0,0 +1,569 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for Variscite VAR-SOM-MX6 Module
+ *
+ * Copyright 2011 Linaro Ltd.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2014-2016 Variscite, Ltd.
+ * Author: Donio Ron <ron.d@variscite.com>
+ * Copyright 2022 Bootlin
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "Variscite VAR-SOM-MX6 module";
+	compatible = "variscite,var-som-imx6q", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbud {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_wl18xx_vmmc: regulator-wl18xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1807";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <70000>;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "var-som-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack",
+					    "Line", "Line In", "Microphone", "Mic Jack";
+		simple-audio-card,routing = "Headphone Jack", "HPLOUT",
+					    "Headphone Jack", "HPROUT",
+					    "LINE1L", "Line In",
+					    "LINE1R", "Line In";
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&clks IMX6QDL_CLK_CKO>;
+		};
+	};
+
+	rfkill {
+		compatible = "rfkill-gpio";
+		name = "rfkill";
+		radio-type = "bluetooth";
+		shutdown-gpios = <&gpio6 18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(2) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(2))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-aud3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rgmii_phy: ethernet-phy@7 {
+			reg = <7>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	tlv320aic3106: audio-codec@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		#sound-dai-cells = <0>;
+		DRVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_3p3v>;
+		IOVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&reg_1p8v>;
+		ai3x-ocmv = <0>;
+		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+		ai3x-gpio-func = <
+			0 /* AIC3X_GPIO1_FUNC_DISABLED */
+			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
+		>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			/* Audio Clock */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
+		>;
+	};
+
+	pinctrl_bt: btgrp {
+		fsl,pins = <
+			/* Bluetooth/wifi enable */
+			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b1
+			/* Wifi Slow Clock */
+			MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT	0x000b0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet_irq: enetirqgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__ENET_IRQ	0x000b1
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* CTW6120 IRQ */
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0xb0b1
+			/* SDMMC2 CD/WP */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			/* PMIC INT */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17069
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10069
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17069
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17069
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17069
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17069
+			/* WL_EN */
+			MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x13059
+			/* WL_IRQ */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08  0x13059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170B9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100B9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170B9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170B9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170B9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170B9
+			/* WL_EN */
+			MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x130B9
+			/* WL_IRQ */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08  0x130B9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170F9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100F9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170F9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170F9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170F9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170F9
+			/* WL_EN */
+			MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x130F9
+			/* WL_IRQ */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08  0x130F9
+		>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&reg_arm {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1c_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&vgen5_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&vgen5_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2 &pinctrl_bt>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_var>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi: wifi@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+		ref-clock-frequency = <38400000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1-12inch.dtsi
index f505f2704530..73f381e14467 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1-12inch.dtsi
@@ -10,7 +10,7 @@
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 		autorepeat;
 
-		power {
+		power-button {
 			label = "Power Button";
 			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi
index a1676b5d2980..de2b12dad7d8 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi
@@ -28,7 +28,7 @@
 		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
 	};
 
-	backlight_led: backlight_led {
+	backlight_led: backlight-led {
 		compatible = "pwm-backlight";
 		pwms = <&pwm3 0 5000000 0>;
 		brightness-levels = <0 16 64 255>;
@@ -37,6 +37,16 @@
 		power-supply = <&reg_3v3>;
 	};
 
+	/* only for backwards compatibility with old HW */
+	backlight_isb: backlight-isb {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 5000000 0>;
+		brightness-levels = <0 8 48 255>;
+		num-interpolated-steps = <5>;
+		default-brightness-level = <0>;
+		power-supply = <&reg_3v3>;
+	};
+
 	connector {
 		compatible = "composite-video-connector";
 		label = "Composite0";
@@ -159,6 +169,14 @@
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 	};
 };
@@ -370,6 +388,12 @@
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
 &pwm3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
@@ -377,8 +401,6 @@
 };
 
 &ssi1 {
-	#sound-dai-cells = <0>;
-	fsl,mode = "ac97-slave";
 	status = "okay";
 };
 
@@ -407,9 +429,9 @@
 };
 
 &usbh1 {
-	pinctrl-names = "default";
 	phy_type = "utmi";
 	dr_mode = "host";
+	disable-over-current;
 	status = "okay";
 };
 
@@ -423,6 +445,14 @@
 	status = "okay";
 };
 
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -601,6 +631,12 @@
 		>;
 	};
 
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT			0x1b0b0
+		>;
+	};
+
 	pinctrl_pwm3: pwm3grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD4_DAT1__PWM3_OUT			0x1b0b0
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revb1.dtsi
new file mode 100644
index 000000000000..3a21ae942273
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revb1.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+//
+// Author: Fabio Estevam <fabio.estevam@freescale.com>
+
+#include "imx6qdl-wandboard.dtsi"
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x0f0b0		/* WL_REF_ON */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x0f0b0		/* WL_RST_N */
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON */
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE */
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x80000000	/* BT_ON */
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x80000000	/* BT_WAKE */
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x80000000	/* BT_HOST_WAKE */
+		>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revc1.dtsi
new file mode 100644
index 000000000000..cc707972f548
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revc1.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+//
+// Author: Fabio Estevam <fabio.estevam@freescale.com>
+
+#include "imx6qdl-wandboard.dtsi"
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog_c1>;
+
+	pinctrl_hog_c1: hogc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
+			MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x0f0b0		/* WIFI_ON (reset, active low) */
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON (unused) */
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE, input */
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x0f0b0		/* GPIO5_IO31 (Wifi Power Enable) */
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE (unused) */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x80000000	/* BT_ON */
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x80000000	/* BT_WAKE */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x80000000	/* BT_HOST_WAKE */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
+		>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revd1.dtsi
new file mode 100644
index 000000000000..8d44e758f1f3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revd1.dtsi
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+//
+// Author: Fabio Estevam <fabio.estevam@freescale.com>
+
+#include "imx6qdl-wandboard.dtsi"
+
+/ {
+	reg_eth_phy: regulator-eth-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "ETH_PHY";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 13 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&fec {
+	phy-supply = <&reg_eth_phy>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog_d1>;
+
+	pinctrl_hog_d1: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* USDHC1 CD */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29   	0x1f0b1		/* RGMII PHY reset */
+		>;
+	};
+
+	enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__SPDIF_OUT		0x1b0b0
+		>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi
new file mode 100644
index 000000000000..26489eccd5fb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	sound {
+		compatible = "fsl,imx6-wandboard-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6-wandboard-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>;
+	};
+
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgvbus>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c1>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mclk>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		lrclk-strength = <3>;
+	};
+
+	camera@3c {
+		compatible = "ovti,ov5645";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5645>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-frequency = <24000000>;
+		vdddo-supply = <&reg_1p8v>;
+		vdda-supply = <&reg_2p8v>;
+		vddd-supply = <&reg_1p5v>;
+		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5645_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b0
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b0
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b0
+		>;
+	};
+
+	pinctrl_mclk: mclkgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
+		>;
+	};
+
+	pinctrl_ov5645: ov5645grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__CCM_CLKO2		0x000b0
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD0__SPDIF_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usbotgvbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x130b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5645_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-zii-rdu2.dtsi
index 525ff62b47f5..9ff183e4e069 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-zii-rdu2.dtsi
@@ -277,7 +277,7 @@
 	pinctrl-0 = <&pinctrl_uart4>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu2";
 		current-speed = <1000000>;
 		#address-cells = <1>;
@@ -757,7 +757,7 @@
 
 				port@2 {
 					reg = <2>;
-					label = "cpu";
+					phy-mode = "rev-rmii";
 					ethernet = <&fec>;
 
 					fixed-link {
@@ -848,7 +848,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -860,7 +860,7 @@
 		>;
 	};
 
-	aud3 {
+	mux-aud3 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -868,7 +868,7 @@
 		>;
 	};
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -880,7 +880,7 @@
 		>;
 	};
 
-	aud5 {
+	mux-aud5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
index 4f7fefc14d0a..45bcfd7faf9d 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
@@ -150,14 +150,13 @@
 		interrupt-parent = <&gpc>;
 		ranges;
 
-		dma_apbh: dma-apbh@110000 {
+		dma_apbh: dma-controller@110000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x00110000 0x2000>;
 			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 			#dma-cells = <1>;
 			dma-channels = <4>;
 			clocks = <&clks IMX6QDL_CLK_APBH_DMA>;
@@ -398,11 +397,10 @@
 					reg = <0x02024000 0x4000>;
 					interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6QDL_CLK_ESAI_IPG>,
-						 <&clks IMX6QDL_CLK_ESAI_MEM>,
 						 <&clks IMX6QDL_CLK_ESAI_EXTAL>,
 						 <&clks IMX6QDL_CLK_ESAI_IPG>,
 						 <&clks IMX6QDL_CLK_SPBA>;
-					clock-names = "core", "mem", "extal", "fsys", "spba";
+					clock-names = "core", "extal", "fsys", "spba";
 					dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
 					dma-names = "rx", "tx";
 					status = "disabled";
@@ -476,7 +474,7 @@
 						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 							"txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
+					fsl,asrc-rate = <48000>;
 					fsl,asrc-width = <16>;
 					status = "okay";
 				};
@@ -713,8 +711,8 @@
 				reg_vdd3p0: regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3150000>;
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x120>;
 					anatop-vol-bit-shift = <8>;
@@ -808,6 +806,7 @@
 				reg = <0x020c9000 0x1000>;
 				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_vdd3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
@@ -816,6 +815,7 @@
 				reg = <0x020ca000 0x1000>;
 				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_USBPHY2>;
+				phy-3p0-supply = <&reg_vdd3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
@@ -929,7 +929,7 @@
 				interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			sdma: sdma@20ec000 {
+			sdma: dma-controller@20ec000 {
 				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -1050,9 +1050,11 @@
 				clocks = <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET_REF>,
-					 <&clks IMX6QDL_CLK_ENET_REF>;
-				clock-names = "ipg", "ahb", "ptp", "enet_out";
+					 <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+				clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
 				fsl,stop-mode = <&gpr 0x34 27>;
+				nvmem-cells = <&fec_mac_addr>;
+				nvmem-cell-names = "mac-address";
 				status = "disabled";
 			};
 
@@ -1157,7 +1159,7 @@
 				status = "disabled";
 			};
 
-			weim: weim@21b8000 {
+			weim: memory-controller@21b8000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6q-weim";
@@ -1186,6 +1188,10 @@
 				tempmon_temp_grade: temp-grade@20 {
 					reg = <0x20 4>;
 				};
+
+				fec_mac_addr: mac-addr@88 {
+					reg = <0x88 6>;
+				};
 			};
 
 			tzasc@21d0000 { /* TZASC1 */
diff --git a/arch/arm/boot/dts/imx6qp-mba6b.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-mba6b.dts
index eee2e09d6e94..eee2e09d6e94 100644
--- a/arch/arm/boot/dts/imx6qp-mba6b.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-mba6b.dts
diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-nitrogen6_max.dts
index 741d1ed338ca..741d1ed338ca 100644
--- a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-nitrogen6_max.dts
diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-nitrogen6_som2.dts
index 1593ac86b2a4..1593ac86b2a4 100644
--- a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-nitrogen6_som2.dts
diff --git a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-phytec-mira-rdk-nand.dts
index a18266598d39..a18266598d39 100644
--- a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-phytec-mira-rdk-nand.dts
diff --git a/arch/arm/boot/dts/imx6qp-prtwd3.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts
index cf6571cc4682..cad985e341a1 100644
--- a/arch/arm/boot/dts/imx6qp-prtwd3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts
@@ -350,7 +350,7 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
-	disable-over-current;
+	over-current-active-low;
 	status = "okay";
 };
 
@@ -384,7 +384,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
@@ -548,7 +548,7 @@
 		>;
 	};
 
-	pinctrl_wifi_npd: wifinpd {
+	pinctrl_wifi_npd: wifinpdgrp {
 		fsl,pins = <
 			/* WL_REG_ON */
 			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10		0x13069
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts
new file mode 100644
index 000000000000..c5b220aeaefd
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Plus SABRE Automotive Board";
+	compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
+};
+
+&i2c2 {
+	max7322: gpio@68 {
+		compatible = "maxim,max7322";
+		reg = <0x68>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ENET_MDIO          0x1b0b0
+			MX6QDL_PAD_KEY_COL2__ENET_MDC           0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b018
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b018
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b018
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b018
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b018
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b018
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b018
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b018
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b018
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b018
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b018
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b018
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+};
+
+&pcie {
+	reset-gpio = <&max7310_c 5 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&vgen3_reg {
+	regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-sabresd.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-sabresd.dts
new file mode 100644
index 000000000000..792697bd4551
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-sabresd.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board";
+	compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
+};
+
+&reg_arm {
+	vin-supply = <&sw2_reg>;
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+			MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+			MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+			MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+};
+
+&vgen3_reg {
+	regulator-always-on;
+};
+
+&pcie {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp-tqma6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qp-tqma6b.dtsi
index bb6ff7c64b27..bb6ff7c64b27 100644
--- a/arch/arm/boot/dts/imx6qp-tqma6b.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tqma6b.dtsi
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts
new file mode 100644
index 000000000000..3183abdd25aa
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6qp-tx6qp-8037.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-8037 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts
new file mode 100644
index 000000000000..174824a8138e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6QP-8037 Module";
+	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts
new file mode 100644
index 000000000000..31854bc52e76
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6qp-tx6qp-8137.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-8137 Module on MB7 baseboard";
+	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts
new file mode 100644
index 000000000000..dfe1535128fe
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6QP-8137 Module";
+	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qp-vicutp.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-vicutp.dts
index 49ff145fffe5..49ff145fffe5 100644
--- a/arch/arm/boot/dts/imx6qp-vicutp.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-vicutp.dts
diff --git a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-wandboard-revd1.dts
index 08d8b78a2096..08d8b78a2096 100644
--- a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-wandboard-revd1.dts
diff --git a/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-crux-plus.dts
index cea165f2161a..afaf4a6759d4 100644
--- a/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-crux-plus.dts
@@ -33,6 +33,10 @@
 	status = "okay";
 };
 
+&reg_pu {
+	regulator-always-on;
+};
+
 &reg_usb_h1_vbus {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts
new file mode 100644
index 000000000000..4a961a33bf2d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Pegasus+ i.MX6QuadPlus board";
+	compatible = "ysoft,imx6qp-yapp4-pegasus-plus", "fsl,imx6qp";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_pu {
+	regulator-always-on;
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-zii-rdu2.dts
index 57de447c4609..57de447c4609 100644
--- a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-zii-rdu2.dts
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qp.dtsi
index 050365513836..fc164991d2ae 100644
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp.dtsi
@@ -9,12 +9,18 @@
 		ocram2: sram@940000 {
 			compatible = "mmio-sram";
 			reg = <0x00940000 0x20000>;
+			ranges = <0 0x00940000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
 		ocram3: sram@960000 {
 			compatible = "mmio-sram";
 			reg = <0x00960000 0x20000>;
+			ranges = <0 0x00960000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
diff --git a/arch/arm/boot/dts/imx6s-dhcom-drc02.dts b/arch/arm/boot/dts/nxp/imx/imx6s-dhcom-drc02.dts
index 4077b607c29e..e42c274a9014 100644
--- a/arch/arm/boot/dts/imx6s-dhcom-drc02.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6s-dhcom-drc02.dts
@@ -3,7 +3,7 @@
  * Copyright (C) 2021 DH electronics GmbH
  *
  * DHCOM iMX6 variant:
- * DHCM-iMX6S-C0800-R102-F0409-E-CAN2-RTC-I-01D2
+ * DHCM-iMX6S-C080-R102-F0409-E-CAN2-RTC-I-01D2
  * DHCOM PCB number: 493-400 or newer
  * DRC02 PCB number: 568-100 or newer
  */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts
new file mode 100644
index 000000000000..036705b783f4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts
@@ -0,0 +1,654 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+//Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloLite EVK Board";
+	compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	backlight_display: backlight_display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-user {
+			label = "debug";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	reg_aud3v: regulator-aud3v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-3v15";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+		regulator-boot-on;
+	};
+
+	reg_aud4v: regulator-aud4v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-4v2";
+		regulator-min-microvolt = <4325000>;
+		regulator-max-microvolt = <4325000>;
+		regulator-boot-on;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+		regulator-name = "lcd-3v3";
+		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sound {
+		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+		hp-det-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux3>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-1 = <&pinctrl_fec_sleep>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
+		DCVDD-supply = <&vgen3_reg>;
+		DBVDD-supply = <&reg_aud3v>;
+		AVDD-supply = <&vgen3_reg>;
+		CPVDD-supply = <&vgen3_reg>;
+		MICVDD-supply = <&reg_aud3v>;
+		PLLVDD-supply = <&vgen3_reg>;
+		SPKVDD1-supply = <&reg_aud4v>;
+		SPKVDD2-supply = <&reg_aud4v>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW7__GPIO4_IO07    0x17059
+			MX6SL_PAD_KEY_COL7__GPIO4_IO06    0x17059
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00    0x17059
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29    0x17059
+			MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+			MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
+			MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
+			MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
+		>;
+	};
+
+	pinctrl_audmux3: audmux3grp {
+		fsl,pins = <
+			MX6SL_PAD_AUD_RXD__AUD3_RXD	  0x4130b0
+			MX6SL_PAD_AUD_TXC__AUD3_TXC	  0x4130b0
+			MX6SL_PAD_AUD_TXD__AUD3_TXD	  0x4110b0
+			MX6SL_PAD_AUD_TXFS__AUD3_TXFS	  0x4130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO	0x100b1
+			MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x100b1
+			MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x100b1
+			MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11	0x80000000
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_MDC__FEC_MDC		0x1b0b0
+			MX6SL_PAD_FEC_MDIO__FEC_MDIO		0x1b0b0
+			MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV		0x1b0b0
+			MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0	0x1b0b0
+			MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1	0x1b0b0
+			MX6SL_PAD_FEC_TX_EN__FEC_TX_EN		0x1b0b0
+			MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0	0x1b0b0
+			MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1	0x1b0b0
+			MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT	0x4001b0a8
+		>;
+	};
+
+	pinctrl_fec_sleep: fec-sleep-grp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_MDC__GPIO4_IO23      0x3080
+			MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25   0x3080
+			MX6SL_PAD_FEC_RXD0__GPIO4_IO17     0x3080
+			MX6SL_PAD_FEC_RXD1__GPIO4_IO18     0x3080
+			MX6SL_PAD_FEC_TX_EN__GPIO4_IO22    0x3080
+			MX6SL_PAD_FEC_TXD0__GPIO4_IO24     0x3080
+			MX6SL_PAD_FEC_TXD1__GPIO4_IO16     0x3080
+			MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26  0x3080
+		>;
+	};
+
+	pinctrl_hp: hpgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_RX_ER__GPIO4_IO19	  0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	0x4001b8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	0x4001b8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_kpp: kppgrp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW0__KEY_ROW0    0x1b010
+			MX6SL_PAD_KEY_ROW1__KEY_ROW1    0x1b010
+			MX6SL_PAD_KEY_ROW2__KEY_ROW2    0x1b0b0
+			MX6SL_PAD_KEY_COL0__KEY_COL0    0x110b0
+			MX6SL_PAD_KEY_COL1__KEY_COL1    0x110b0
+			MX6SL_PAD_KEY_COL2__KEY_COL2    0x110b0
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0
+			MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0
+			MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0
+			MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0
+			MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0
+			MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0
+			MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0
+			MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0
+			MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0
+			MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0
+			MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0
+			MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0
+			MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0
+			MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0
+			MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0
+			MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0
+			MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0
+			MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0
+			MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0
+			MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0
+			MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0
+			MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0
+			MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0
+			MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0
+			MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0
+			MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0
+			MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0
+			MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
+		>;
+	};
+
+	pinctrl_pwm1: pwmgrp {
+		fsl,pins = <
+			MX6SL_PAD_PWM1__PWM1_OUT 0x110b0
+		>;
+	};
+
+	pinctrl_reg_lcd_3v3: reglcd3v3grp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW5__GPIO4_IO03    0x17059
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x1b0b1
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6SL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x17059
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x17059
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x17059
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD		0x170b9
+			MX6SL_PAD_SD1_CLK__SD1_CLK		0x100b9
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170b9
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170b9
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170b9
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170b9
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170b9
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170b9
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170b9
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD		0x170f9
+			MX6SL_PAD_SD1_CLK__SD1_CLK		0x100f9
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170f9
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170f9
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170f9
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6SL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+		>;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	linux,keymap = <
+			MATRIX_KEY(0x0, 0x0, KEY_UP)         /* ROW0, COL0 */
+			MATRIX_KEY(0x0, 0x1, KEY_DOWN)       /* ROW0, COL1 */
+			MATRIX_KEY(0x0, 0x2, KEY_ENTER)      /* ROW0, COL2 */
+			MATRIX_KEY(0x1, 0x0, KEY_HOME)       /* ROW1, COL0 */
+			MATRIX_KEY(0x1, 0x1, KEY_RIGHT)      /* ROW1, COL1 */
+			MATRIX_KEY(0x1, 0x2, KEY_LEFT)       /* ROW1, COL2 */
+			MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */
+			MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP)   /* ROW2, COL1 */
+	>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&sw2_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-kobo-aura2.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-kobo-aura2.dts
new file mode 100644
index 000000000000..657d0f1b6115
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-kobo-aura2.dts
@@ -0,0 +1,555 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for the Kobo Aura 2 ebook reader
+ *
+ * Name on mainboard is: 37NB-E60QL0+4B1
+ * Serials start with: E60QL2
+ *
+ * Copyright 2022 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Kobo Aura 2";
+	compatible = "kobo,aura2", "fsl,imx6sl";
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-cover {
+			label = "Cover";
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-0 {
+			label = "koboaura2:white:on";
+			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_WHITE>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_power>;
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reset>;
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+	status = "okay";
+
+	lm3630a: backlight@36 {
+		compatible = "ti,lm3630a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+		reg = <0x36>;
+		enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0>;
+			label = "backlight";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* eKTF2232 at 0x15 */
+	/* FP9928 at 0x48 */
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ricoh619: pmic@32 {
+		compatible = "ricoh,rc5t619";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ricoh_gpio>;
+		reg = <0x32>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		system-power-controller;
+
+		regulators {
+			dcdc1_reg: DCDC1 {
+				regulator-name = "DCDC1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <900000>;
+					regulator-suspend-min-microvolt = <900000>;
+				};
+			};
+
+			/* Core3_3V3 */
+			dcdc2_reg: DCDC2 {
+				regulator-name = "DCDC2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3100000>;
+					regulator-suspend-min-microvolt = <3100000>;
+				};
+			};
+
+			dcdc3_reg: DCDC3 {
+				regulator-name = "DCDC3";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V2 */
+			dcdc4_reg: DCDC4 {
+				regulator-name = "DCDC4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V8 */
+			dcdc5_reg: DCDC5 {
+				regulator-name = "DCDC5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1700000>;
+					regulator-suspend-min-microvolt = <1700000>;
+				};
+			};
+
+			/* IR_3V3 */
+			ldo1_reg: LDO1  {
+				regulator-name = "LDO1";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* Core1_3V3 */
+			ldo2_reg: LDO2  {
+				regulator-name = "LDO2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3000000>;
+					regulator-suspend-min-microvolt = <3000000>;
+				};
+			};
+
+			/* Core5_1V2 */
+			ldo3_reg: LDO3  {
+				regulator-name = "LDO3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-boot-on;
+			};
+
+			/* SPD_3V3 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* DDR_0V6 */
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* VDD_PWM */
+			ldo7_reg: LDO7 {
+				regulator-name = "LDO7";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* ldo_1v8 */
+			ldo8_reg: LDO8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "LDO9";
+				regulator-boot-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "LDO10";
+				regulator-boot-on;
+			};
+
+			ldortc1_reg: LDORTC1  {
+				regulator-name = "LDORTC1";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_arm {
+	vin-supply = <&dcdc3_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&snvs_rtc {
+	/*
+	 * We are using the RTC in the PMIC, but this one is not disabled
+	 * in imx6sl.dtsi.
+	 */
+	status = "disabled";
+};
+
+&uart1 {
+	/* J4, through-holes */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	/* TP198, next to J4, SMD pads */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+	non-removable;
+	status = "okay";
+
+	/* internal uSD card */
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * RTL8189F SDIO WiFi
+	 */
+};
+
+&usbotg1 {
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x17059
+			MX6SL_PAD_SD1_DAT4__GPIO5_IO12  0x17059
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CLK__GPIO5_IO15	0x1b8b1 /* ricoh619 chg */
+			MX6SL_PAD_SD1_DAT0__GPIO5_IO11	0x1b8b1 /* ricoh619 irq */
+			MX6SL_PAD_KEY_COL2__GPIO3_IO28	0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
+			MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
+			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
+			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
+			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sl-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6sl-pinfunc.h
index bcf16060ecdc..bcf16060ecdc 100644
--- a/arch/arm/boot/dts/imx6sl-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-pinfunc.h
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
index 663ee9df79e6..b6c336e3079e 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
@@ -18,6 +18,21 @@
 	model = "Tolino Shine 2 HD";
 	compatible = "kobo,tolino-shine2hd", "fsl,imx6sl";
 
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ec 0 50000>;
+		power-supply = <&backlight_regulator>;
+	};
+
+	backlight_regulator: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_power>;
+		regulator-name = "backlight";
+		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	chosen {
 		stdout-path = &uart1;
 	};
@@ -65,6 +80,12 @@
 			gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
+
+		led-1 {
+			label = "tolinoshine2hd:white:backlightboost";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
 	};
 
 	memory@80000000 {
@@ -117,11 +138,13 @@
 		pinctrl-0 = <&pinctrl_zforce>;
 		reg = <0x50>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
 		vdd-supply = <&ldo1_reg>;
 		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-		x-size = <1072>;
-		y-size = <1448>;
+		touchscreen-size-x = <1072>;
+		touchscreen-size-y = <1448>;
+		touchscreen-swapped-x-y;
+		touchscreen-inverted-x;
 	};
 
 	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
@@ -140,7 +163,7 @@
 		pinctrl-0 = <&pinctrl_ricoh_gpio>;
 		reg = <0x32>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		system-power-controller;
 
 		regulators {
@@ -299,6 +322,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
+	pinctrl_backlight_power: backlight-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x17059
@@ -353,7 +382,7 @@
 		>;
 	};
 
-	pinctrl_i2c1_sleep: i2c1grp-sleep {
+	pinctrl_i2c1_sleep: i2c1sleep-grp {
 		fsl,pins = <
 			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
 			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
@@ -367,7 +396,7 @@
 		>;
 	};
 
-	pinctrl_i2c2_sleep: i2c2grp-sleep {
+	pinctrl_i2c2_sleep: i2c2sleep-grp {
 		fsl,pins = <
 			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
 			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
@@ -383,7 +412,8 @@
 
 	pinctrl_led: ledgrp {
 		fsl,pins = <
-			MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x17059
+			MX6SL_PAD_SD1_DAT2__GPIO5_IO13    0x17059
+			MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29  0x17059
 		>;
 	};
 
@@ -426,7 +456,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
 			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
@@ -437,7 +467,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
 			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
@@ -448,7 +478,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+	pinctrl_usdhc2_sleep: usdhc2sleep-grp {
 		fsl,pins = <
 			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
 			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
@@ -470,7 +500,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
 			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
@@ -481,7 +511,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
 			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
@@ -492,7 +522,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+	pinctrl_usdhc3_sleep: usdhc3sleep-grp {
 		fsl,pins = <
 			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
 			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
@@ -597,6 +627,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine3.dts
index e3f1e8d79528..5ba6f15e9ed5 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine3.dts
@@ -52,6 +52,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT3__GPIO5_IO06                0x17059 /* TP_INT */
+			MX6SL_PAD_SD1_DAT2__GPIO5_IO13                0x10059 /* TP_RST */
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD1_DAT1__GPIO5_IO08	0x17059	/* PWR_SW */
@@ -104,7 +111,7 @@
 		>;
 	};
 
-	pinctrl_i2c1_sleep: i2c1grp-sleep {
+	pinctrl_i2c1_sleep: i2c1sleep-grp {
 		fsl,pins = <
 			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
 			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
@@ -118,7 +125,7 @@
 		>;
 	};
 
-	pinctrl_i2c2_sleep: i2c2grp-sleep {
+	pinctrl_i2c2_sleep: i2c2sleep-grp {
 		fsl,pins = <
 			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
 			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
@@ -183,7 +190,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
 			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
@@ -194,7 +201,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
 			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
@@ -205,7 +212,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+	pinctrl_usdhc2_sleep: usdhc2sleep-grp {
 		fsl,pins = <
 			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
 			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
@@ -227,7 +234,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
 			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
@@ -238,7 +245,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
 			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
@@ -249,7 +256,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+	pinctrl_usdhc3_sleep: usdhc3sleep-grp {
 		fsl,pins = <
 			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
 			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts
new file mode 100644
index 000000000000..2694fe18a91b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts
@@ -0,0 +1,490 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for the Tolino Vison ebook reader
+ *
+ * Name on mainboard is: 37NB-E60Q30+4A3
+ * Serials start with: 6032
+ *
+ * Copyright 2023 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Tolino Vision";
+	compatible = "kobo,tolino-vision", "fsl,imx6sl";
+
+	aliases {
+		mmc0 = &usdhc4;
+		mmc1 = &usdhc2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ec 0 50000>;
+		power-supply = <&backlight_regulator>;
+	};
+
+	backlight_regulator: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_power>;
+		regulator-name = "backlight";
+		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-cover {
+			/* magnetic sensor in the corner next to the uSD slot */
+			label = "Cover";
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		key-fl {
+			label = "Frontlight";
+			gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BRIGHTNESS_CYCLE>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			/* LED on home button */
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* LED on power button */
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_power>;
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	};
+
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reset>;
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+	status = "okay";
+
+	touchscreen@15 {
+		compatible = "elan,ektf2132";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		power-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+		interrupts-extended = <&gpio5 6 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	accelerometer@1d {
+		compatible = "fsl,mma8652";
+		reg = <0x1d>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	ec: embedded-controller@43 {
+		compatible = "netronix,ntxec";
+		reg = <0x43>;
+		#pwm-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ec>;
+		interrupts-extended = <&gpio5 11 IRQ_TYPE_EDGE_FALLING>;
+		system-power-controller;
+	};
+};
+
+&snvs_rtc {
+	/*
+	 * We are using the RTC in the PMIC, but this one is not disabled
+	 * in imx6sl.dtsi.
+	 */
+	status = "disabled";
+};
+
+&uart1 {
+	/* J4 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	/* J9 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+	cd-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	/* removable uSD card */
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+
+	/* CyberTan WC121 (BCM43362) SDIO WiFi */
+};
+
+&usdhc4 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc4_sleep>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+
+	/* internal eMMC */
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight_power: backlight-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059
+		>;
+	};
+
+	pinctrl_ec: ecgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT0__GPIO5_IO11  0x17000
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x110B0
+			MX6SL_PAD_SD1_DAT4__GPIO5_IO12  0x110B0
+			MX6SL_PAD_KEY_COL1__GPIO3_IO26  0x11030
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT6__GPIO5_IO07    0x17059
+			MX6SL_PAD_SD1_DAT7__GPIO5_IO10    0x17059
+			MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29  0x17059
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT2__GPIO5_IO13	0x110B0
+			MX6SL_PAD_SD1_DAT3__GPIO5_IO06	0x1B0B1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
+			MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6SL_PAD_SD2_DAT4__GPIO5_IO02		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
+			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
+			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
+			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__SD4_CMD		0x17059
+			MX6SL_PAD_FEC_MDIO__SD4_CLK		0x13059
+			MX6SL_PAD_FEC_RX_ER__SD4_DATA0		0x17059
+			MX6SL_PAD_FEC_CRS_DV__SD4_DATA1		0x17059
+			MX6SL_PAD_FEC_RXD1__SD4_DATA2		0x17059
+			MX6SL_PAD_FEC_TXD0__SD4_DATA3		0x17059
+			MX6SL_PAD_FEC_MDC__SD4_DATA4		0x17059
+			MX6SL_PAD_FEC_RXD0__SD4_DATA5		0x17059
+			MX6SL_PAD_FEC_TX_EN__SD4_DATA6		0x17059
+			MX6SL_PAD_FEC_TXD1__SD4_DATA7		0x17059
+			MX6SL_PAD_FEC_REF_CLK__SD4_RESET	0x17068
+		>;
+	};
+
+	pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__SD4_CMD		0x170b9
+			MX6SL_PAD_FEC_MDIO__SD4_CLK		0x130b9
+			MX6SL_PAD_FEC_RX_ER__SD4_DATA0		0x170b9
+			MX6SL_PAD_FEC_CRS_DV__SD4_DATA1		0x170b9
+			MX6SL_PAD_FEC_RXD1__SD4_DATA2		0x170b9
+			MX6SL_PAD_FEC_TXD0__SD4_DATA3		0x170b9
+			MX6SL_PAD_FEC_MDC__SD4_DATA4		0x170b9
+			MX6SL_PAD_FEC_RXD0__SD4_DATA5		0x170b9
+			MX6SL_PAD_FEC_TX_EN__SD4_DATA6		0x170b9
+			MX6SL_PAD_FEC_TXD1__SD4_DATA7		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__SD4_CMD		0x170f9
+			MX6SL_PAD_FEC_MDIO__SD4_CLK		0x130f9
+			MX6SL_PAD_FEC_RX_ER__SD4_DATA0		0x170f9
+			MX6SL_PAD_FEC_CRS_DV__SD4_DATA1		0x170f9
+			MX6SL_PAD_FEC_RXD1__SD4_DATA2		0x170f9
+			MX6SL_PAD_FEC_TXD0__SD4_DATA3		0x170f9
+			MX6SL_PAD_FEC_MDC__SD4_DATA4		0x170f9
+			MX6SL_PAD_FEC_RXD0__SD4_DATA5		0x170f9
+			MX6SL_PAD_FEC_TX_EN__SD4_DATA6		0x170f9
+			MX6SL_PAD_FEC_TXD1__SD4_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc4_sleep: usdhc4-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21	0x100c1
+			MX6SL_PAD_FEC_MDIO__GPIO4_IO20		0x100c1
+			MX6SL_PAD_FEC_RX_ER__GPIO4_IO19		0x100c1
+			MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25	0x100c1
+			MX6SL_PAD_FEC_RXD1__GPIO4_IO18		0x100c1
+			MX6SL_PAD_FEC_TXD0__GPIO4_IO24		0x100c1
+			MX6SL_PAD_FEC_MDC__GPIO4_IO23		0x100c1
+			MX6SL_PAD_FEC_RXD0__GPIO4_IO17		0x100c1
+			MX6SL_PAD_FEC_TX_EN__GPIO4_IO22		0x100c1
+			MX6SL_PAD_FEC_TXD1__GPIO4_IO16		0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sl-tolino-vision5.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts
index ff6118df3946..a2534c422a52 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-vision5.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts
@@ -52,6 +52,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TXD0__GPIO4_IO24          0x17059 /* TP_INT */
+			MX6SL_PAD_FEC_RXD1__GPIO4_IO18          0x10059 /* TP_RST */
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25	0x17059	/* PWR_SW */
@@ -104,7 +111,7 @@
 		>;
 	};
 
-	pinctrl_i2c1_sleep: i2c1grp-sleep {
+	pinctrl_i2c1_sleep: i2c1sleep-grp {
 		fsl,pins = <
 			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
 			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
@@ -118,7 +125,7 @@
 		>;
 	};
 
-	pinctrl_i2c2_sleep: i2c2grp-sleep {
+	pinctrl_i2c2_sleep: i2c2sleep-grp {
 		fsl,pins = <
 			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
 			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-warp.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-warp.dts
new file mode 100644
index 000000000000..a5d48c382314
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-warp.dts
@@ -0,0 +1,232 @@
+/*
+ * Copyright 2014, 2015 O.S. Systems Software LTDA.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Revotics WaRP Board";
+	compatible = "revotics,imx6sl-warp", "fsl,imx6sl";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	usdhc3_pwrseq: usdhc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, 	/* WL_REG_ON */
+			      <&gpio4 7 GPIO_ACTIVE_LOW>, 	/* WL_HOSTWAKE */
+			      <&gpio3 25 GPIO_ACTIVE_LOW>, 	/* BT_REG_ON */
+			      <&gpio3 27 GPIO_ACTIVE_LOW>,	/* BT_HOSTWAKE */
+			      <&gpio4 4 GPIO_ACTIVE_LOW>, 	/* BT_WAKE */
+			      <&gpio4 6 GPIO_ACTIVE_LOW>; 	/* BT_RST_N */
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x41b0b1
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x41b0b1
+		>;
+	};
+
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6SL_PAD_AUD_RXC__UART3_RX_DATA	0x41b0b1
+			MX6SL_PAD_AUD_RXC__UART3_TX_DATA	0x41b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA	0x41b0b1
+			MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA	0x41b0b1
+			MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B	0x4130b1
+			MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B	0x4130b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x417059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x410059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x417059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x417059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x417059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x417059
+			MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x417059
+			MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x417059
+			MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x417059
+			MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x417059
+			MX6SL_PAD_SD2_RST__SD2_RESET		0x417059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170b9
+			MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170b9
+			MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170b9
+			MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170b9
+			MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170b9
+			MX6SL_PAD_SD2_RST__SD2_RESET		0x4170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170f9
+			MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170f9
+			MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170f9
+			MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170f9
+			MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170f9
+			MX6SL_PAD_SD2_RST__SD2_RESET		0x4170f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD		0x417059
+			MX6SL_PAD_SD3_CLK__SD3_CLK		0x410059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x417059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x417059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x417059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x417059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD		0x4170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK		0x4100b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x4170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x4170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x4170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x4170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD		0x4170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK		0x4100f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x4170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x4170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x4170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x4170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi
index 06a515121dfc..7381fb7f8912 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi
@@ -61,10 +61,10 @@
 				<792000  1175000>,
 				<396000  975000>;
 			fsl,soc-operating-points =
-				/* ARM kHz      SOC-PU uV */
-				<996000         1225000>,
-				<792000         1175000>,
-				<396000         1175000>;
+				/* ARM kHz	SOC-PU uV */
+				<996000		1225000>,
+				<792000		1175000>,
+				<396000		1175000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			#cooling-cells = <2>;
 			clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
@@ -115,6 +115,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SL_CLK_OCRAM>;
 		};
 
@@ -222,7 +225,7 @@
 
 				uart5: serial@2018000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02018000 0x4000>;
 					interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -235,7 +238,7 @@
 
 				uart1: serial@2020000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
 					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -248,7 +251,7 @@
 
 				uart2: serial@2024000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02024000 0x4000>;
 					interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -309,7 +312,7 @@
 
 				uart3: serial@2034000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02034000 0x4000>;
 					interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -322,7 +325,7 @@
 
 				uart4: serial@2038000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02038000 0x4000>;
 					interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -375,7 +378,7 @@
 			};
 
 			gpt: timer@2098000 {
-				compatible = "fsl,imx6sl-gpt";
+				compatible = "fsl,imx6sl-gpt", "fsl,imx6dl-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_GPT>,
@@ -543,8 +546,8 @@
 				reg_vdd3p0: regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3150000>;
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x120>;
 					anatop-vol-bit-shift = <8>;
@@ -628,6 +631,7 @@
 					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
 					nvmem-cell-names = "calib", "temp_grade";
 					clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
+					#thermal-sensor-cells = <0>;
 				};
 			};
 
@@ -636,6 +640,7 @@
 				reg = <0x020c9000 0x1000>;
 				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_vdd3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
@@ -644,6 +649,7 @@
 				reg = <0x020ca000 0x1000>;
 				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USBPHY2>;
+				phy-3p0-supply = <&reg_vdd3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
@@ -711,7 +717,7 @@
 						#power-domain-cells = <0>;
 						power-supply = <&reg_pu>;
 						clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
-						         <&clks IMX6SL_CLK_GPU2D_PODF>;
+							 <&clks IMX6SL_CLK_GPU2D_PODF>;
 					};
 
 					pd_disp: power-domain@2 {
@@ -747,7 +753,7 @@
 				interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			sdma: sdma@20ec000 {
+			sdma: dma-controller@20ec000 {
 				compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -856,7 +862,7 @@
 			};
 
 			usdhc1: mmc@2190000 {
-				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				compatible = "fsl,imx6sl-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USDHC1>,
@@ -868,7 +874,7 @@
 			};
 
 			usdhc2: mmc@2194000 {
-				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				compatible = "fsl,imx6sl-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USDHC2>,
@@ -880,7 +886,7 @@
 			};
 
 			usdhc3: mmc@2198000 {
-				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				compatible = "fsl,imx6sl-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USDHC3>,
@@ -892,7 +898,7 @@
 			};
 
 			usdhc4: mmc@219c000 {
-				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				compatible = "fsl,imx6sl-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USDHC4>,
@@ -946,7 +952,7 @@
 				clocks = <&clks IMX6SL_CLK_DUMMY>;
 			};
 
-			weim: weim@21b8000 {
+			weim: memory-controller@21b8000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				reg = <0x021b8000 0x4000>;
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-evk.dts
index 32b3d82fec53..814401486792 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-evk.dts
@@ -26,7 +26,7 @@
 
 	backlight_display: backlight-display {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
@@ -37,7 +37,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user {
+		led-user {
 			label = "debug";
 			gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -109,6 +109,14 @@
 		enable-active-high;
 	};
 
+	reg_sd2_vmmc: regulator-sd2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "eMMC-VCCQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+	};
+
 	reg_sd3_vmmc: regulator-sd3-vmmc {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -149,7 +157,7 @@
 			"IN3R", "AMIC";
 		mux-int-port = <2>;
 		mux-ext-port = <3>;
-		hp-det-gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
+		hp-det-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -306,10 +314,8 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
 };
 
 &snvs_poweroff {
@@ -343,6 +349,17 @@
 	status = "okay";
 };
 
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	vqmmc-supply = <&reg_sd2_vmmc>;
+	status = "okay";
+};
+
 &usbotg1 {
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	pinctrl-names = "default";
@@ -444,7 +461,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170b9
 			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130b9
@@ -455,7 +472,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170f9
 			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130f9
@@ -466,6 +483,54 @@
 		>;
 	};
 
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x17059
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x17059
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x17059
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x17059
+			MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x17059
+			MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x17059
+			MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x17059
+			MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x17059
+			MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x13059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170b9
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170b9
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170b9
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170b9
+			MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x170b9
+			MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x170b9
+			MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x170b9
+			MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x170b9
+			MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x130b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170f9
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170f9
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170f9
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170f9
+			MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x170f9
+			MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x170f9
+			MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x170f9
+			MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x170f9
+			MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x130f9
+		>;
+	};
+
 	pinctrl_usbotg1: usbotg1grp {
 		fsl,pins = <
 			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
@@ -484,7 +549,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x170a1
 			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x130a1
@@ -496,7 +561,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x170e9
 			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x130f9
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dts
new file mode 100644
index 000000000000..33756d6de7aa
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Kobo Clara 2E rev A ebook reader
+ *
+ * Name on mainboard is: 37NB-E60K2M+4A2
+ * Serials start with: E60K2M (a number also seen in
+ * vendor kernel sources)
+ *
+ * Copyright 2024 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include "imx6sll-kobo-clara2e-common.dtsi"
+
+/ {
+	model = "Kobo Clara 2E";
+	compatible = "kobo,clara2e-b", "kobo,clara2e", "fsl,imx6sll";
+};
+
+&i2c2 {
+	/* EPD PMIC SY7636 at 0x62 */
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts
new file mode 100644
index 000000000000..f81aeacf5142
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Kobo Clara 2E rev B ebook reader
+ *
+ * Name on mainboard is: 37NB-E60K2M+4B0
+ * Serials start with: E60K2M (a number also seen in
+ * vendor kernel sources)
+ *
+ * Copyright 2024 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include "imx6sll-kobo-clara2e-common.dtsi"
+
+/ {
+	model = "Kobo Clara 2E";
+	compatible = "kobo,clara2e-b", "kobo,clara2e", "fsl,imx6sll";
+};
+
+&i2c2 {
+	/* EPD PMIC JD9930 at 0x18 */
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-common.dtsi
new file mode 100644
index 000000000000..6f2deb366e02
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-common.dtsi
@@ -0,0 +1,511 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Common part for Kobo Clara 2e device tree
+ * Copyright 2024 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6sll.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-cover {
+			label = "Cover";
+			gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <393216000>;
+};
+
+&cpu0 {
+	arm-supply = <&buck1>;
+	soc-supply = <&buck2>;
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* backlight aw99703 at 0x36 */
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* backlight aw99703 at 0x36 */
+
+	touchscreen@38 {
+		compatible = "focaltech,ft5426";
+		reg = <0x38>;
+		pinctrl-names = "default", "suspend";
+		pinctrl-0 = <&pinctrl_touch_gpio>;
+		pinctrl-1 = <&pinctrl_touch_gpio_sleep>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1072>;
+		touchscreen-size-y = <1448>;
+		touchscreen-swapped-x-y;
+	};
+};
+
+&i2c3 {
+	/* Bus seems to be in bad state after boot, allow full recovery */
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	sda-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71879", "rohm,bd71828";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bd71828>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		system-power-controller;
+		clocks = <&clks 0>;
+		#clock-cells = <0>;
+		clock-output-names = "bd71828-32k-out";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-reserved-ranges = <0 1>, <2 1>;
+
+		/* charge sense resistor is 30 milli-ohm */
+
+		regulators {
+			LDO1 {
+				name = "LDO1";
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			LDO2 {
+				name = "LDO2";
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			LDO3 {
+				name = "LDO3";
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo4: LDO4 {
+				name = "LDO4";
+				regulator-name = "ldo4";
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			LDO5 {
+				name = "LDO5";
+				regulator-name = "ldo5";
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			LDO6 {
+				name = "LDO6";
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDO7 {
+				name = "LDO7";
+				regulator-name = "ldo7";
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+
+			buck1: BUCK1 {
+				name = "BUCK1";
+				regulator-name = "buck1";
+				regulator-always-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+			};
+
+			buck2: BUCK2 {
+				name = "BUCK2";
+				regulator-name = "buck2";
+				regulator-always-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-boot-on;
+			};
+
+			BUCK3 {
+				name = "BUCK3";
+				regulator-name = "buck3";
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			BUCK4 {
+				name = "BUCK4";
+				regulator-name = "buck4";
+				regulator-always-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+			};
+
+			BUCK5 {
+				name = "BUCK5";
+				regulator-name = "buck5";
+				regulator-always-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+
+			BUCK6 {
+				name = "BUCK6";
+				regulator-name = "buck6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2000000>;
+			};
+
+			BUCK7 {
+				name = "BUCK7";
+				regulator-name = "buck7";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2000000>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_bd71828: bd71828-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL0__GPIO3_IO24		0x1b8b1
+			MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19	0x1b8b1
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25	0x17059	/* PWR_SW */
+			MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23	0x17059	/* HALL_EN */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	0x4001f8b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	0x400108b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C2_SCL__I2C2_SCL	0x4001f8b1
+			MX6SLL_PAD_I2C2_SDA__I2C2_SDA	0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C2_SCL__I2C2_SCL	0x400108b1
+			MX6SLL_PAD_I2C2_SDA__I2C2_SDA	0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
+			MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21 0x4001f8b1
+			MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17 0x10059
+		>;
+	};
+
+	pinctrl_touch_gpio: touch-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24	0x17059 /* TP_INT */
+			MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18	0x10059 /* TP_RST */
+		>;
+	};
+
+	pinctrl_touch_gpio_sleep: touch-gpio-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24	0x10059 /* TP_INT */
+			MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18	0x10059 /* TP_RST */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+			MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6SLL_PAD_LCD_ENABLE__UART2_DCE_RX	0x41b0b1
+			MX6SLL_PAD_LCD_HSYNC__UART2_DCE_TX	0x41b0b1
+			MX6SLL_PAD_LCD_VSYNC__UART2_DCE_RTS	0x41b0b1
+			MX6SLL_PAD_LCD_RESET__UART2_DCE_CTS	0x41b0b1
+		>;
+	};
+
+	pinctrl_uart2_sleep: uart2-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16	0x10059
+			MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17	0x10059
+			MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18	0x10059
+			MX6SLL_PAD_LCD_RESET__GPIO2_IO19	0x10059
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x17059
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x17059
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x17059
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170b9
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170b9
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170b9
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170f9
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170f9
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170f9
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SLL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SLL_PAD_SD2_DATA0__GPIO5_IO01	0x100f9
+			MX6SLL_PAD_SD2_DATA1__GPIO4_IO30	0x100f9
+			MX6SLL_PAD_SD2_DATA2__GPIO5_IO03	0x100f9
+			MX6SLL_PAD_SD2_DATA3__GPIO4_IO28	0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x11059
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x11059
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x11059
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170b9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170b9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170b9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170f9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170f9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170f9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SLL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SLL_PAD_SD3_DATA0__GPIO5_IO19	0x100c1
+			MX6SLL_PAD_SD3_DATA1__GPIO5_IO20	0x100c1
+			MX6SLL_PAD_SD3_DATA2__GPIO5_IO16	0x100c1
+			MX6SLL_PAD_SD3_DATA3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_DATA6__GPIO4_IO29	0x10059
+		>;
+	};
+};
+
+&snvs_rtc {
+	/* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-1 = <&pinctrl_uart2_sleep>;
+	status = "okay";
+
+	/* requires LDO4 + power enable gpio */
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+		fw-init-baudrate = <1500000>;
+	};
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+	/* card requires also ldo4 */
+	vmmc-supply = <&reg_wifi>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd.dts
index 90b32f5eb529..18c9ac8f7560 100644
--- a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd.dts
@@ -62,6 +62,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_DATA3__GPIO5_IO06                0x17059 /* TP_INT */
+			MX6SLL_PAD_SD1_DATA2__GPIO5_IO13                0x10059 /* TP_RST */
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD1_DATA1__GPIO5_IO08	0x17059	/* PWR_SW */
@@ -114,7 +121,7 @@
 		>;
 	};
 
-	pinctrl_i2c1_sleep: i2c1grp-sleep {
+	pinctrl_i2c1_sleep: i2c1sleep-grp {
 		fsl,pins = <
 			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	0x400108b1
 			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	0x400108b1
@@ -128,7 +135,7 @@
 		>;
 	};
 
-	pinctrl_i2c2_sleep: i2c2grp-sleep {
+	pinctrl_i2c2_sleep: i2c2sleep-grp {
 		fsl,pins = <
 			MX6SLL_PAD_I2C2_SCL__I2C2_SCL	0x400108b1
 			MX6SLL_PAD_I2C2_SDA__I2C2_SDA	0x400108b1
@@ -193,7 +200,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170b9
 			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130b9
@@ -204,7 +211,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170f9
 			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130f9
@@ -215,7 +222,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+	pinctrl_usdhc2_sleep: usdhc2sleep-grp {
 		fsl,pins = <
 			MX6SLL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
 			MX6SLL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
@@ -237,7 +244,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170b9
 			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170b9
@@ -248,7 +255,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170f9
 			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170f9
@@ -259,7 +266,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+	pinctrl_usdhc3_sleep: usdhc3sleep-grp {
 		fsl,pins = <
 			MX6SLL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
 			MX6SLL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
diff --git a/arch/arm/boot/dts/imx6sll-kobo-librah2o.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts
index a8b0e88064d9..660620d226f7 100644
--- a/arch/arm/boot/dts/imx6sll-kobo-librah2o.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts
@@ -62,6 +62,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24	0x17059 /* TP_INT */
+			MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18	0x10059 /* TP_RST */
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25	0x17059	/* PWR_SW */
@@ -114,7 +121,7 @@
 		>;
 	};
 
-	pinctrl_i2c1_sleep: i2c1grp-sleep {
+	pinctrl_i2c1_sleep: i2c1sleep-grp {
 		fsl,pins = <
 			MX6SLL_PAD_I2C1_SCL__I2C1_SCL   0x400108b1
 			MX6SLL_PAD_I2C1_SDA__I2C1_SDA   0x400108b1
@@ -128,7 +135,7 @@
 		>;
 	};
 
-	pinctrl_i2c2_sleep: i2c2grp-sleep {
+	pinctrl_i2c2_sleep: i2c2sleep-grp {
 		fsl,pins = <
 			MX6SLL_PAD_I2C2_SCL__I2C2_SCL   0x400108b1
 			MX6SLL_PAD_I2C2_SDA__I2C2_SDA   0x400108b1
diff --git a/arch/arm/boot/dts/imx6sll-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6sll-pinfunc.h
index 713a346f4c89..713a346f4c89 100644
--- a/arch/arm/boot/dts/imx6sll-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-pinfunc.h
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
index d4a000c3dde7..704870e8c10c 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
@@ -115,6 +115,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		intc: interrupt-controller@a01000 {
@@ -170,7 +173,7 @@
 						      "rxtx1", "rxtx2",
 						      "rxtx3", "rxtx4",
 						      "rxtx5", "rxtx6",
-						      "rxtx7", "dma";
+						      "rxtx7", "spba";
 					status = "disabled";
 				};
 
@@ -306,7 +309,7 @@
 					reg = <0x02034000 0x4000>;
 					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
-					dma-name = "rx", "tx";
+					dma-names = "rx", "tx";
 					clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
 						 <&clks IMX6SLL_CLK_UART3_SERIAL>;
 					clock-names = "ipg", "per";
@@ -355,7 +358,7 @@
 			};
 
 			gpt1: timer@2098000 {
-				compatible = "fsl,imx6sl-gpt";
+				compatible = "fsl,imx6sl-gpt", "fsl,imx6dl-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
@@ -504,12 +507,9 @@
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				reg_3p0: regulator-3p0@20c8120 {
+				reg_3p0: regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
-					reg = <0x20c8120>;
 					regulator-name = "vdd3p0";
 					regulator-min-microvolt = <2625000>;
 					regulator-max-microvolt = <3400000>;
@@ -522,7 +522,7 @@
 					anatop-enable-bit = <0>;
 				};
 
-				tempmon: temperature-sensor {
+				tempmon: tempmon {
 					compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
 					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-parent = <&gpc>;
@@ -530,6 +530,7 @@
 					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
 					nvmem-cell-names = "calib", "temp_grade";
 					clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
+					#thermal-sensor-cells = <0>;
 				};
 			};
 
@@ -549,7 +550,7 @@
 				reg = <0x020ca000 0x1000>;
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SLL_CLK_USBPHY2>;
-				phy-reg_3p0-supply = <&reg_3p0>;
+				phy-3p0-supply = <&reg_3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
@@ -598,6 +599,18 @@
 				#interrupt-cells = <3>;
 				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&intc>;
+				clocks = <&clks IMX6SLL_CLK_IPG>;
+				clock-names = "ipg";
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@0 {
+						reg = <0>;
+						#power-domain-cells = <0>;
+					};
+				};
 			};
 
 			iomuxc: pinctrl@20e0000 {
@@ -680,7 +693,6 @@
 				clocks = <&clks IMX6SLL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
 				rx-burst-size-dword = <0x10>;
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts
index a2c79bcf9a11..1c1515a854c8 100644
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts
@@ -18,7 +18,7 @@
 
 	backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		power-supply = <&reg_3p3v>;
@@ -72,7 +72,6 @@
 		pinctrl-0 = <&pinctrl_reg_wlan>;
 		compatible = "regulator-fixed";
 		clocks = <&clks IMX6SX_CLK_CKO>;
-		clock-names = "slow";
 		regulator-name = "wlan-en";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -84,7 +83,7 @@
 	sound {
 		compatible = "fsl,imx-audio-sgtl5000";
 		model = "imx6sx-nitrogen6sx-sgtl5000";
-		cpu-dai = <&ssi1>;
+		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
 			"MIC_IN", "Mic Jack",
@@ -196,6 +195,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sgtl5000>;
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6SX_CLK_CKO2>;
 		VDDA-supply = <&reg_1p8v>;
 		VDDIO-supply = <&reg_1p8v>;
@@ -229,10 +229,8 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
 };
 
 &ssi1 {
diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6sx-pinfunc.h
index f4dc46207954..f4dc46207954 100644
--- a/arch/arm/boot/dts/imx6sx-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-pinfunc.h
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts
index 83ee97252ff1..033700e052b3 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts
@@ -20,7 +20,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user {
+		led-user {
 			label = "debug";
 			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -97,11 +97,16 @@
 			"AIN2R", "Line In Jack";
 	};
 
+	spdif_in: spdif-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_in>;
 	};
 };
 
@@ -328,7 +333,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
 			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
 			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
@@ -343,7 +348,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
 			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
 			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6sx-sdb-mqs.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-mqs.dts
index a4ab2d3e960c..a4ab2d3e960c 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-mqs.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-mqs.dts
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-reva.dts
index 7dda42553f4b..48f19dede467 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-reva.dts
@@ -15,7 +15,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6sx-sdb-sai.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-sai.dts
index 1c4eacd68e1b..1c4eacd68e1b 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-sai.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-sai.dts
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dts
index 969cfe920d25..e05a1be5553c 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dts
@@ -14,7 +14,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze200";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
new file mode 100644
index 000000000000..c7aeb99d8f00
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
@@ -0,0 +1,719 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX SDB Board";
+	compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	backlight_display: backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	vcc_sd3: regulator-vcc-sd3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_sd3>;
+		regulator-name = "VCC_SD3";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg2>;
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_psu_5v: regulator-psu-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "PSU-5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		gpio = <&gpio3 27 0>;
+		enable-active-high;
+	};
+
+	reg_peri_3v3: regulator-peri-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_peri_3v3>;
+		regulator-name = "peri_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_enet_3v3: regulator-enet-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enet_3v3>;
+		regulator-name = "enet_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_pcie_gpio: regulator-pcie-gpio {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound {
+		compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <6>;
+		hp-det-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx6sx-sdb-spdif",
+			     "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>;
+	};
+
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-supply = <&reg_enet_3v3>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy2>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SX_CLK_AUDIO>;
+		DCVDD-supply = <&vgen4_reg>;
+		DBVDD-supply = <&vgen4_reg>;
+		AVDD-supply = <&vgen4_reg>;
+		CPVDD-supply = <&vgen4_reg>;
+		MICVDD-supply = <&vgen3_reg>;
+		PLLVDD-supply = <&vgen4_reg>;
+		SPKVDD1-supply = <&reg_psu_5v>;
+		SPKVDD2-supply = <&reg_psu_5v>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_gpio>;
+	status = "okay";
+};
+
+&lcdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "disabled";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart5 { /* for bluetooth */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&vcc_sd3>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC	0x130b0
+			MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS	0x130b0
+			MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD	0x120b0
+			MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD	0x130b0
+			MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1
+			MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1
+			MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC	0xa0b1
+			MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1
+			MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1
+			MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2	0xa0b1
+			MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3	0xa0b1
+			MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1
+			MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK	0x3081
+			MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081
+			MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081
+			MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
+			MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
+			MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
+			MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91
+			/* phy reset */
+			MX6SX_PAD_ENET2_CRS__GPIO2_IO_7		0x10b0
+		>;
+	};
+
+	pinctrl_enet_3v3: enet3v3grp {
+		fsl,pins = <
+			MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0x80000000
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC	0xa0b9
+			MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0xa0b1
+			MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0xa0b1
+			MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2	0xa0b1
+			MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3	0xa0b1
+			MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0xa0b1
+			MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK	0x3081
+			MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x3081
+			MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x3081
+			MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2	0x3081
+			MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3	0x3081
+			MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x3081
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b020
+			MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b020
+			MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b020
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
+			MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
+		>;
+	};
+
+	pinctrl_hp: hpgrp {
+		fsl,pins = <
+			MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x17059
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
+			MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
+			MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1
+			MX6SX_PAD_CSI_DATA06__I2C4_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+			MX6SX_PAD_LCD1_CLK__LCDIF1_CLK	0x4001b0b0
+			MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+			MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+			MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+			MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+		>;
+	};
+
+	pinctrl_mqs: mqsgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x120b0
+			MX6SX_PAD_SD2_CMD__MQS_LEFT  0x120b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0
+		>;
+	};
+
+	pinctrl_pcie_reg: pciereggrp {
+		fsl,pins = <
+			MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0x10b0
+		>;
+	};
+
+	pinctrl_peri_3v3: peri3v3grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x80000000
+		>;
+	};
+
+	pinctrl_pwm3: pwm3-1grp {
+		fsl,pins = <
+			MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
+		>;
+	};
+
+	pinctrl_qspi2: qspi2grp {
+		fsl,pins = <
+			MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0     0x70f1
+			MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1  0x70f1
+			MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2    0x70f1
+			MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3    0x70f1
+			MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK        0x70f1
+			MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B       0x70f1
+			MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0   0x70f1
+			MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1   0x70f1
+			MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2     0x70f1
+			MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3     0x70f1
+			MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK     0x70f1
+			MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B    0x70f1
+		>;
+	};
+
+	pinctrl_vcc_sd3: vccsd3grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK	0x130b0
+			MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC	0x130b0
+			MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0	0x120b0
+			MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0	0x130b0
+			MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD4_DATA4__SPDIF_OUT          0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1
+			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_ROW3__UART5_DCE_RX	0x1b0b1
+			MX6SX_PAD_KEY_COL3__UART5_DCE_TX	0x1b0b1
+			MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS	0x1b0b1
+			MX6SX_PAD_KEY_COL2__UART5_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usb_otg2: usbot2ggrp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12	0x10b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
+			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
+			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
+			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
+			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
+			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
+			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
+			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
+			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
+			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
+			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
+			MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
+			MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
+			MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
+			MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
+			MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
+			MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
+			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
+			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
+			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
+			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
+			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
+			MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
+			MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
+			MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
+			MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
+			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
+			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
+			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
+			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
+			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
+			MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
+			MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
+			MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
+			MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
+			MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
+			MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts
index b9a1401e6c6d..2ffbe2df4776 100644
--- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts
@@ -46,19 +46,19 @@
 		led-1 {
 			label = "red";
 			max-brightness = <255>;
-			pwms = <&pwm6 0 50000>;
+			pwms = <&pwm6 0 50000 0>;
 		};
 
 		led-2 {
 			label = "green";
 			max-brightness = <255>;
-			pwms = <&pwm2 0 50000>;
+			pwms = <&pwm2 0 50000 0>;
 		};
 
 		led-3 {
 			label = "blue";
 			max-brightness = <255>;
-			pwms = <&pwm1 0 50000>;
+			pwms = <&pwm1 0 50000 0>;
 		};
 	};
 };
@@ -171,7 +171,7 @@
 		reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
 	};
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze200";
 		reg = <0x08>;
 
@@ -358,21 +358,21 @@
 		>;
 	};
 
-	pinctrl_pwm1: pwm1grp-1 {
+	pinctrl_pwm1: pwm1-1grp {
 		fsl,pins = <
 			/* blue LED */
 			MX6SX_PAD_RGMII2_RD3__PWM1_OUT		0x1b0b1
 		>;
 	};
 
-	pinctrl_pwm2: pwm2grp-1 {
+	pinctrl_pwm2: pwm2-1grp {
 		fsl,pins = <
 			/* green LED */
 			MX6SX_PAD_RGMII2_RD2__PWM2_OUT		0x1b0b1
 		>;
 	};
 
-	pinctrl_pwm6: pwm6grp-1 {
+	pinctrl_pwm6: pwm6-1grp {
 		fsl,pins = <
 			/* red LED */
 			MX6SX_PAD_RGMII2_TD2__PWM6_OUT		0x1b0b1
@@ -414,7 +414,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_50mhz: usdhc2grp-50mhz {
+	pinctrl_usdhc2_50mhz: usdhc2-50mhzgrp {
 		fsl,pins = <
 			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
 			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
@@ -427,7 +427,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
 			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x100b9
 			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x170b9
@@ -438,7 +438,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
 			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x100f9
 			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x170f9
@@ -449,7 +449,7 @@
 		>;
 	};
 
-	pinctrl_usdhc4_50mhz: usdhc4grp-50mhz {
+	pinctrl_usdhc4_50mhz: usdhc4-50mhzgrp {
 		fsl,pins = <
 			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
 			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
@@ -465,7 +465,7 @@
 		>;
 	};
 
-	pinctrl_usdhc4_100mhz: usdhc4-100mhz {
+	pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
 		fsl,pins = <
 			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100b9
 			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170b9
@@ -480,7 +480,7 @@
 		>;
 	};
 
-	pinctrl_usdhc4_200mhz: usdhc4-200mhz {
+	pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
 		fsl,pins = <
 			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100f9
 			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170f9
@@ -505,24 +505,18 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
 };
 
 &pwm6 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm6>;
-	status = "okay";
 };
 
 &reg_arm {
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-basic.dts
index 205ea26484e3..205ea26484e3 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-basic.dts
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-extended.dts
index 5817b4985391..5817b4985391 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-extended.dts
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-full.dts
index 96f4d89848a3..96f4d89848a3 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-full.dts
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo.dtsi
index 35861bbea94e..bbf792ac4896 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo.dtsi
@@ -15,14 +15,14 @@
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led-red {
 			label = "udoo-neo:red:mmc";
 			gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 			linux,default-trigger = "mmc0";
 		};
 
-		orange {
+		led-orange {
 			label = "udoo-neo:orange:user";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
@@ -72,6 +72,11 @@
 	};
 };
 
+&clks {
+	assigned-clocks = <&clks IMX6SX_CLK_ENET_REF>;
+	assigned-clock-rates = <50000000>;
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
@@ -226,7 +231,7 @@
 &iomuxc {
 	pinctrl_bt_reg: btreggrp {
 		fsl,pins =
-			<MX6SX_PAD_KEY_ROW2__GPIO2_IO_17        0x15059>;
+			<MX6SX_PAD_KEY_ROW2__GPIO2_IO_17	0x15059>;
 	};
 
 	pinctrl_enet1: enet1grp {
@@ -306,7 +311,6 @@
 		>;
 	};
 
-
 	pinctrl_uart1: uart1grp {
 		fsl,pins =
 			<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1>,
@@ -347,24 +351,23 @@
 
 	pinctrl_otg1_reg: otg1grp {
 		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9        0x10b0>;
+			<MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0>;
 	};
 
-
 	pinctrl_otg2_reg: otg2grp {
 		fsl,pins =
-			<MX6SX_PAD_NAND_RE_B__GPIO4_IO_12        0x10b0>;
+			<MX6SX_PAD_NAND_RE_B__GPIO4_IO_12	0x10b0>;
 	};
 
 	pinctrl_usb_otg1: usbotg1grp {
 		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID    0x17059>,
-			<MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC       0x10b0>;
+			<MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059>,
+			<MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC	0x10b0>;
 	};
 
 	pinctrl_usb_otg2: usbot2ggrp {
 		fsl,pins =
-			<MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC     0x10b0>;
+			<MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC	0x10b0>;
 	};
 
 	pinctrl_usdhc2: usdhc2grp {
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
index 4d075e2bf749..5132b575b001 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
@@ -164,12 +164,18 @@
 		ocram_s: sram@8f8000 {
 			compatible = "mmio-sram";
 			reg = <0x008f8000 0x4000>;
+			ranges = <0 0x008f8000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM_S>;
 		};
 
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM>;
 		};
 
@@ -203,20 +209,19 @@
 			power-domains = <&pd_pu>;
 		};
 
-		dma_apbh: dma-apbh@1804000 {
+		dma_apbh: dma-controller@1804000 {
 			compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x01804000 0x2000>;
 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 			#dma-cells = <1>;
 			dma-channels = <4>;
 			clocks = <&clks IMX6SX_CLK_APBH_DMA>;
 		};
 
-		gpmi: nand-controller@1806000{
+		gpmi: nand-controller@1806000 {
 			compatible = "fsl,imx6sx-gpmi-nand";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -334,15 +339,14 @@
 				};
 
 				esai: esai@2024000 {
-					compatible = "fsl,imx6sx-esai", "fsl,imx35-esai";
+					compatible = "fsl,imx35-esai";
 					reg = <0x02024000 0x4000>;
 					interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
-						 <&clks IMX6SX_CLK_ESAI_MEM>,
 						 <&clks IMX6SX_CLK_ESAI_EXTAL>,
 						 <&clks IMX6SX_CLK_ESAI_IPG>,
 						 <&clks IMX6SX_CLK_SPBA>;
-					clock-names = "core", "mem", "extal",
+					clock-names = "core", "extal",
 						      "fsys", "spba";
 					dmas = <&sdma 23 21 0>,
 					       <&sdma 24 21 0>;
@@ -413,7 +417,7 @@
 					       <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 						    "txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
+					fsl,asrc-rate = <48000>;
 					fsl,asrc-width = <16>;
 					status = "okay";
 				};
@@ -633,8 +637,8 @@
 				reg_vdd3p0: regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3150000>;
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x120>;
 					anatop-vol-bit-shift = <8>;
@@ -711,13 +715,14 @@
 				};
 
 				tempmon: tempmon {
-					compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+					compatible = "fsl,imx6sx-tempmon";
 					interrupt-parent = <&gpc>;
 					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 					fsl,tempmon = <&anatop>;
 					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
 					nvmem-cell-names = "calib", "temp_grade";
 					clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+					#thermal-sensor-cells = <0>;
 				};
 			};
 
@@ -726,6 +731,7 @@
 				reg = <0x020c9000 0x1000>;
 				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_vdd3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
@@ -734,6 +740,7 @@
 				reg = <0x020ca000 0x1000>;
 				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_USBPHY2>;
+				phy-3p0-supply = <&reg_vdd3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
@@ -836,13 +843,42 @@
 				reg = <0x020e0000 0x4000>;
 			};
 
-			gpr: iomuxc-gpr@20e4000 {
+			gpr: syscon@20e4000 {
 				compatible = "fsl,imx6sx-iomuxc-gpr",
-					     "fsl,imx6q-iomuxc-gpr", "syscon";
+					     "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
+				#address-cells = <1>;
+				#size-cells = <1>;
 				reg = <0x020e4000 0x4000>;
+
+				lvds_bridge: bridge@18 {
+					compatible = "fsl,imx6sx-ldb";
+					reg = <0x18 0x4>;
+					clocks = <&clks IMX6SX_CLK_LDB_DI0>;
+					clock-names = "ldb";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							ldb_from_lcdif1: endpoint {
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							ldb_lvds_ch0: endpoint {
+							};
+						};
+					};
+				};
 			};
 
-			sdma: sdma@20ec000 {
+			sdma: dma-controller@20ec000 {
 				compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -895,7 +931,6 @@
 				clocks = <&clks IMX6SX_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
 				rx-burst-size-dword = <0x10>;
@@ -923,7 +958,6 @@
 				fsl,usbphy = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc 2>;
 				phy_type = "hsic";
-				fsl,anatop = <&anatop>;
 				dr_mode = "host";
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
@@ -967,7 +1001,7 @@
 			};
 
 			usdhc1: mmc@2190000 {
-				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				compatible = "fsl,imx6sx-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_USDHC1>,
@@ -975,11 +1009,13 @@
 					 <&clks IMX6SX_CLK_USDHC1>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
 			usdhc2: mmc@2194000 {
-				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				compatible = "fsl,imx6sx-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_USDHC2>,
@@ -987,11 +1023,13 @@
 					 <&clks IMX6SX_CLK_USDHC2>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
 			usdhc3: mmc@2198000 {
-				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				compatible = "fsl,imx6sx-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_USDHC3>,
@@ -999,11 +1037,13 @@
 					 <&clks IMX6SX_CLK_USDHC3>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
 			usdhc4: mmc@219c000 {
-				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				compatible = "fsl,imx6sx-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_USDHC4>,
@@ -1067,7 +1107,7 @@
 				status = "disabled";
 			};
 
-			weim: weim@21b8000 {
+			weim: memory-controller@21b8000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
@@ -1271,8 +1311,17 @@
 						 <&clks IMX6SX_CLK_LCDIF_APB>,
 						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
 					clock-names = "pix", "axi", "disp_axi";
+					assigned-clocks = <&clks IMX6SX_CLK_LCDIF1_PRE_SEL>,
+							  <&clks IMX6SX_CLK_LCDIF1_SEL>;
+					assigned-clock-parents = <&clks IMX6SX_CLK_PLL5_VIDEO_DIV>,
+								 <&clks IMX6SX_CLK_LCDIF1_PODF>;
 					power-domains = <&pd_disp>;
 					status = "disabled";
+
+					port {
+						lcdif1_to_ldb: endpoint {
+						};
+					};
 				};
 
 				lcdif2: lcdif@2224000 {
@@ -1385,7 +1434,7 @@
 
 			pwm8: pwm@22b0000 {
 				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x0022b0000 0x4000>;
+				reg = <0x022b0000 0x4000>;
 				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_PWM8>,
 					 <&clks IMX6SX_CLK_PWM8>;
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dts
index 2438669f149a..2438669f149a 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dts
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
index 1a18c41ce385..73c9cfbdba62 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
@@ -2,6 +2,8 @@
 //
 // Copyright (C) 2015 Freescale Semiconductor, Inc.
 
+#include <dt-bindings/media/video-interfaces.h>
+
 / {
 	chosen {
 		stdout-path = &uart1;
@@ -14,12 +16,32 @@
 
 	backlight_display: backlight-display {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
 	};
 
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_2v8: regulator-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
 
 	reg_sd1_vmmc: regulator-sd1-vmmc {
 		compatible = "regulator-fixed";
@@ -60,13 +82,40 @@
 		gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
 	};
 
+	reg_audio_5v: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	sound-wm8960 {
 		compatible = "fsl,imx-audio-wm8960";
 		model = "wm8960-audio";
 		audio-cpu = <&sai2>;
 		audio-codec = <&codec>;
 		audio-asrc = <&asrc>;
-		hp-det-gpio = <&gpio5 4 0>;
+		hp-det-gpios = <&gpio5 4 0>;
 		audio-routing =
 			"Headphone Jack", "HP_L",
 			"Headphone Jack", "HP_R",
@@ -82,13 +131,13 @@
 			"AMIC", "MICB";
 	};
 
-	spi4 {
+	spi-4 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_spi4>;
 		status = "okay";
-		gpio-sck = <&gpio5 11 0>;
-		gpio-mosi = <&gpio5 10 0>;
+		sck-gpios = <&gpio5 11 0>;
+		mosi-gpios = <&gpio5 10 0>;
 		cs-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 		#address-cells = <1>;
@@ -137,6 +186,11 @@
 		wlf,gpio-cfg = <1 3>;
 		clocks = <&clks IMX6UL_CLK_SAI2>;
 		clock-names = "mclk";
+		AVDD-supply = <&reg_audio_3v3>;
+		DBVDD-supply = <&reg_audio_1v8>;
+		DCVDD-supply = <&reg_audio_1v8>;
+		SPKVDD1-supply = <&reg_audio_5v>;
+		SPKVDD2-supply = <&reg_audio_5v>;
 	};
 
 	camera@3c {
@@ -148,6 +202,9 @@
 		clock-names = "xclk";
 		powerdown-gpios = <&gpio_spi 6 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>;
+		AVDD-supply = <&reg_2v8>;
+		DVDD-supply = <&reg_1v5>;
+		DOVDD-supply = <&reg_1v8>;
 
 		port {
 			ov5640_to_parallel: endpoint {
@@ -170,7 +227,7 @@
 	port {
 		parallel_from_ov5640: endpoint {
 			remote-endpoint = <&ov5640_to_parallel>;
-			bus-type = <5>; /* Parallel bus */
+			bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
 		};
 	};
 };
@@ -275,7 +332,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -319,7 +375,7 @@
 &tsc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 	measure-delay-time = <0xffff>;
 	pre-charge-time = <0xfff>;
 	status = "okay";
@@ -388,8 +444,6 @@
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-
 	pinctrl_camera_clock: cameraclockgrp {
 		fsl,pins = <
 			MX6UL_PAD_CSI_MCLK__CSI_MCLK		0x1b088
@@ -440,14 +494,14 @@
 		>;
 	};
 
-	pinctrl_flexcan1: flexcan1grp{
+	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
 			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
 		>;
 	};
 
-	pinctrl_flexcan2: flexcan2grp{
+	pinctrl_flexcan2: flexcan2grp {
 		fsl,pins = <
 			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
 			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
@@ -607,7 +661,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
@@ -619,7 +673,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcexpress.dts
index 3792679c0c90..0d3b1ab82eab 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcexpress.dts
@@ -112,7 +112,7 @@
 		>;
 	};
 
-	pinctrl_ecspi3_master: ecspi3grp1 {
+	pinctrl_ecspi3_master: ecspi3-1-grp {
 		fsl,pins = <
 			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
 			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
@@ -121,7 +121,7 @@
 		>;
 	};
 
-	pinctrl_ecspi3_slave: ecspi3grp2 {
+	pinctrl_ecspi3_slave: ecspi3-2-grp {
 		fsl,pins = <
 			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
 			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
@@ -145,7 +145,7 @@
 		>;
 	};
 
-	pinctrl_flexcan1: flexcan1grp{
+	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX	0x1b020
 			MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX	0x1b020
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts
index 3ec042bfccba..8aea8c99e2af 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts
@@ -18,7 +18,7 @@
 
 	lcd_backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm5 0 50000>;
+		pwms = <&pwm5 0 50000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
@@ -168,7 +168,6 @@
 };
 
 &pwm5 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm5>;
 	status = "okay";
@@ -249,7 +248,7 @@
 		>;
 	};
 
-	pinctrl_ecspi1_master: ecspi1grp1 {
+	pinctrl_ecspi1_master: ecspi1-1-grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x10b0
 			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x10b0
@@ -291,26 +290,26 @@
 		>;
 	};
 
-	pinctrl_flexcan1: flexcan1grp{
+	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
 			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
 		>;
 	};
-	pinctrl_flexcan2: flexcan2grp{
+	pinctrl_flexcan2: flexcan2grp {
 		fsl,pins = <
 			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
 			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
 		>;
 	};
 
-	pinctrl_goodix_touch: goodixgrp{
+	pinctrl_goodix_touch: goodixgrp {
 		fsl,pins = <
 			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1020
 		>;
 	};
 
-	pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 {
+	pinctrl_lcdif_dat0_17: lcdifdat0-17-grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
 			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
@@ -333,14 +332,14 @@
 		>;
 	};
 
-	pinctrl_lcdif_clken: lcdifctrlgrp1 {
+	pinctrl_lcdif_clken: lcdifctrl-1-grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x17050
 			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
 		>;
 	};
 
-	pinctrl_lcdif_hvsync: lcdifctrlgrp2 {
+	pinctrl_lcdif_hvsync: lcdifctrl-2-grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
 			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
@@ -371,7 +370,7 @@
 		>;
 	};
 
-	pinctrl_sai2_sleep: sai2grp-sleep {
+	pinctrl_sai2_sleep: sai2-sleep-grp {
 		fsl,pins = <
 			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x3000
 			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x3000
@@ -382,7 +381,7 @@
 		>;
 	};
 
-	pinctrl_uart2_4wires: uart2grp-4wires {
+	pinctrl_uart2_4wires: uart2-4wires-grp {
 		fsl,pins = <
 			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
 			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
@@ -391,7 +390,7 @@
 		>;
 	};
 
-	pinctrl_uart3_2wires: uart3grp-2wires {
+	pinctrl_uart3_2wires: uart3-2wires-grp {
 		fsl,pins = <
 			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
 			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsom.dtsi
index b5781c3656d1..9cc3eebb6b05 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsom.dtsi
@@ -114,7 +114,6 @@
 			};
 
 			vdda_adc_3v3: vldo1 {
-				compatible = "regulator-fixed";
 				regulator-name = "vref-adc-3v3";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -158,7 +157,7 @@
 				regulator-max-microvolt = <3300000>;
 			};
 
-			vcoin_chg: vcoin {
+			vcoin_chg: coin {
 				regulator-min-microvolt = <2500000>;
 				regulator-max-microvolt = <3300000>;
 			};
@@ -233,7 +232,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_sleep: usdhc1grp-sleep {
+	pinctrl_usdhc1_sleep: usdhc1-sleep-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__GPIO2_IO16           0x3000
 			MX6UL_PAD_SD1_CLK__GPIO2_IO17           0x3000
@@ -251,7 +250,7 @@
 		>;
 	};
 
-	pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-grp-sleep {
+	pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-sleep-grp {
 		fsl,pins = <
 			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x3000
 			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x3000
diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
index a0097da03f38..2a6bb5ff808a 100644
--- a/arch/arm/boot/dts/imx6ul-geam.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
@@ -21,7 +21,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm8 0 100000>;
+		pwms = <&pwm8 0 100000 0>;
 		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
 				     10 11 12 13 14 15 16 17 18 19
 				     20 21 22 23 24 25 26 27 28 29
@@ -148,7 +148,6 @@
 		reg = <0x0a>;
 		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6UL_CLK_OSC>;
-		clock-names = "mclk";
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
 		VDDD-supply = <&reg_1p8v>;
@@ -195,7 +194,6 @@
 };
 
 &pwm8 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm8>;
 	status = "okay";
@@ -204,7 +202,7 @@
 &tsc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 };
 
 &sai2 {
@@ -367,7 +365,7 @@
 	};
 
 	pinctrl_tsc: tscgrp {
-		fsl,pin = <
+		fsl,pins = <
 			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
 			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
 			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
@@ -412,7 +410,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
@@ -423,7 +421,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi
index f2386dcb9ff2..dda4fa91b2f2 100644
--- a/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi
@@ -40,6 +40,9 @@
 			reg = <1>;
 			interrupt-parent = <&gpio4>;
 			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
index 18cac19aa9b0..be3cacb4fa7a 100644
--- a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
@@ -9,7 +9,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 191000>;
+		pwms = <&pwm3 0 191000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_5v>;
@@ -143,7 +143,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
@@ -156,7 +155,7 @@
 &tsc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 	measure-delay-time = <0xffff>;
 	pre-charge-time = <0xffff>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot-emmc.dts
index 1df3e376ae2c..1df3e376ae2c 100644
--- a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot-emmc.dts
diff --git a/arch/arm/boot/dts/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot-nand.dts
index 8c26d4d1a7bf..8c26d4d1a7bf 100644
--- a/arch/arm/boot/dts/imx6ul-isiot-nand.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot-nand.dts
diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi
index 14fc4828ba4e..4c09bb312696 100644
--- a/arch/arm/boot/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi
@@ -20,7 +20,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm8 0 100000>;
+		pwms = <&pwm8 0 100000 0>;
 		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
 				     10 11 12 13 14 15 16 17 18 19
 				     20 21 22 23 24 25 26 27 28 29
@@ -187,7 +187,6 @@
 };
 
 &pwm8 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm8>;
 	status = "okay";
@@ -323,7 +322,7 @@
 		>;
 	};
 
-	pinctrl_stmpe: stmpegrp  {
+	pinctrl_stmpe: stmpegrp {
 		fsl,pins = <
 			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0
 		>;
@@ -347,7 +346,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
@@ -358,7 +357,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dts
new file mode 100644
index 000000000000..4e8191a65211
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul-kontron-bl.dts"
+
+/ {
+	model = "Kontron BL i.MX6UL 43 (N631X S 43)";
+	compatible = "kontron,bl-imx6ul-43", "kontron,bl-imx6ul",
+		     "kontron,sl-imx6ul", "fsl,imx6ul";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm7 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+};
+
+&i2c4 {
+	touchscreen@5d {
+		compatible = "goodix,gt928";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cap_touch>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+		irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
+	/* Leave status disabled because of missing display panel node */
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_cap_touch: captouchgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x1b0b0 /* Touch Interrupt */
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0 /* Touch Reset */
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x1b0b0 /* Touch Wake */
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			MX6UL_PAD_LCD_RESET__LCDIF_RESET	0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+		>;
+	};
+
+	pinctrl_pwm7: pwm7grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__PWM7_OUT		0x110b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi
new file mode 100644
index 000000000000..f4c45e964daf
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led1 {
+			label = "debug-led1";
+			gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "debug-led2";
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "debug-led3";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	pwm-beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm8 0 5000 0>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_adc: regulator-vref-adc {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-adc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+	vref-supply = <&reg_vref_adc>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	eeprom@0 {
+		compatible = "anvo,anv32e61w", "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		spi-cpha;
+		spi-cpol;
+		pagesize = <1>;
+		size = <8192>;
+		address-width = <16>;
+	};
+};
+
+&fec1 {
+	pinctrl-0 = <&pinctrl_enet1>;
+	/delete-node/ mdio;
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	over-current-active-low;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3v3>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3v3>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
+
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0xb0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA07__ECSPI1_MISO	0x100b1
+			MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI	0x100b1
+			MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK	0x100b1
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x100b1	/* ECSPI1-CS1 */
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b009
+		>;
+	};
+
+	pinctrl_enet2_mdio: enet2mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0	/* DOUT1 */
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x1b0b0	/* DIN1 */
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x1b0b0	/* DOUT2 */
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0	/* DIN2 */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x1b0b0	/* LED H14 */
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x1b0b0	/* LED H15 */
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0	/* LED H16 */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL	0x4001f8b0
+			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA	0x4001f8b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__PWM8_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA04__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_NAND_DATA05__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS	0x1b0b1
+			/*
+			 * mux unused RTS to make sure it doesn't cause
+			 * any interrupts when it is undefined
+			 */
+			MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x100b1	/* SD1_CD */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10059
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl.dts
new file mode 100644
index 000000000000..dadf6d3d5f52
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-kontron-sl.dtsi"
+#include "imx6ul-kontron-bl-common.dtsi"
+
+/ {
+	model = "Kontron BL i.MX6UL (N631X S)";
+	compatible = "kontron,bl-imx6ul", "kontron,sl-imx6ul", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi
new file mode 100644
index 000000000000..4c0ac4d4df68
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x10000000>;
+		device_type = "memory";
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0xf0000>;
+				label = "u-boot";
+			};
+
+			partition@f0000 {
+				reg = <0xf0000 0x8000>;
+				label = "env";
+			};
+
+			partition@f8000 {
+				reg = <0xf8000 0x8000>;
+				label = "env_redundant";
+			};
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&fec2 {
+	phy-mode = "rmii";
+	status = "disabled";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		spi-max-frequency = <104000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+	};
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_out>;
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__ECSPI2_MISO      0x100b1
+			MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI      0x100b1
+			MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK      0x100b1
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22       0x100b1
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b009
+		>;
+	};
+
+	pinctrl_enet1_mdio: enet1mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC         0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO        0x1b0b0
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK        0x70a1
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00   0x70a1
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01     0x70a1
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02     0x70a1
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03       0x70a1
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B        0x70a1
+		>;
+	};
+
+	pinctrl_reset_out: rstoutgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY    0x18b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl.dtsi
new file mode 100644
index 000000000000..0580d043e5ae
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ul-kontron-sl-common.dtsi"
+
+/ {
+	model = "Kontron SL i.MX6UL (N631X SOM)";
+	compatible = "kontron,sl-imx6ul", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/imx6ul-liteboard.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-liteboard.dts
index 1d863a16bcf0..5e62272acfba 100644
--- a/arch/arm/boot/dts/imx6ul-liteboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-liteboard.dts
@@ -100,7 +100,7 @@
 		>;
 	};
 
-	pinctrl_usb_otg1_vbus: usb-otg1-vbus {
+	pinctrl_usb_otg1_vbus: usb-otg1-vbus-grp {
 		fsl,pins = <
 			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x79
 		>;
diff --git a/arch/arm/boot/dts/imx6ul-litesom.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-litesom.dtsi
index 8d6893210842..8d6893210842 100644
--- a/arch/arm/boot/dts/imx6ul-litesom.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-litesom.dtsi
diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-opos6ul.dtsi
index 6ce84f92b027..6ce84f92b027 100644
--- a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-opos6ul.dtsi
diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-opos6uldev.dts
index 375b98d7205a..375b98d7205a 100644
--- a/arch/arm/boot/dts/imx6ul-opos6uldev.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-opos6uldev.dts
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-phycore-som.dtsi
index 3cddc68917a0..a3ea1b208462 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-phycore-som.dtsi
@@ -30,7 +30,7 @@
 		pinctrl-0 = <&pinctrl_gpioleds_som>;
 		compatible = "gpio-leds";
 
-		phycore-green {
+		led-phycore-green {
 			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
@@ -102,6 +102,10 @@
 	status = "disabled";
 };
 
+&wdog1 {
+	fsl,suspend-in-wait;
+};
+
 &iomuxc {
 	pinctrl_enet1: enet1grp {
 		fsl,pins = <
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-ff-rdk-emmc.dts
index cfc744f8fcad..cfc744f8fcad 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-ff-rdk-emmc.dts
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-ff-rdk-nand.dts
index 607eddc5030f..607eddc5030f 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-ff-rdk-nand.dts
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi
index ec042648bd98..c6064f4c679b 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi
@@ -61,7 +61,7 @@
 		wakeup-source;
 		status = "disabled";
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			st,sample-time = <4>;
 			st,mod-12b = <1>;
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi
index 2f3fd32a1167..113485e3397a 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi
@@ -8,12 +8,12 @@
 
 / {
 	gpio_keys: gpio-keys {
-		compatible = "gpio-key";
+		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 		status = "disabled";
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -29,13 +29,13 @@
 
 		user-led1 {
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
 		user-led2 {
 			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "on";
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-wlbt-05.dtsi
index 04477fd4b9a9..4a45fb784ff7 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-wlbt-05.dtsi
@@ -31,7 +31,7 @@
 		>;
 	};
 
-	pinctrl_uart2_bt: uart2grp-bt {
+	pinctrl_uart2_bt: uart2-bt-grp {
 		fsl,pins = <
 			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX   0x17059
 			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX   0x17059
@@ -40,7 +40,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_wl: usdhc2grp-wl {
+	pinctrl_usdhc2_wl: usdhc2-wl-grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_DATA18__USDHC2_CMD    0x10051
 			MX6UL_PAD_LCD_DATA19__USDHC2_CLK    0x10061
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin.dtsi
index 38ea4dcfa228..bef5eb38a90d 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin.dtsi
@@ -219,7 +219,7 @@
 		>;
 	};
 
-	pinctrl_flexcan1: flexcan1 {
+	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
 			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
@@ -275,7 +275,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
@@ -286,7 +286,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6ul-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts
index 162dc259edc8..fb206c1d8aca 100644
--- a/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts
@@ -32,7 +32,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
@@ -40,6 +40,7 @@
 	sgtl5000: audio-codec@a {
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
 		clocks = <&sys_mclk>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dts
index 09f7ffa9ad8c..bf7dbb4f1f3e 100644
--- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dts
@@ -51,6 +51,7 @@
 	sgtl5000: codec@a {
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
 		clocks = <&sys_mclk>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
diff --git a/arch/arm/boot/dts/imx6ul-pico-pi.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dts
index 6cd7d5877d20..6cfc943a8fa3 100644
--- a/arch/arm/boot/dts/imx6ul-pico-pi.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dts
@@ -51,6 +51,7 @@
 	sgtl5000: codec@a {
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
 		clocks = <&sys_mclk>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
index 357ffb2f5ad6..9fa5225994e3 100644
--- a/arch/arm/boot/dts/imx6ul-pico.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
@@ -22,7 +22,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
+		pwms = <&pwm3 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
@@ -76,6 +76,7 @@
 	panel {
 		compatible = "vxt,vl050-8048nt-c01";
 		backlight = <&backlight>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in: endpoint {
@@ -121,6 +122,8 @@
 			max-speed = <100>;
 			interrupt-parent = <&gpio5>;
 			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 		};
 	};
 };
@@ -131,7 +134,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
@@ -175,7 +178,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6ul-pinfunc.h
index 380d2db13a9b..380d2db13a9b 100644
--- a/arch/arm/boot/dts/imx6ul-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pinfunc.h
diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-prti6g.dts
index c18390f238e1..c3c50f51a5a8 100644
--- a/arch/arm/boot/dts/imx6ul-prti6g.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-prti6g.dts
@@ -26,6 +26,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet1_ref_pad";
 	};
 
 	leds {
@@ -60,6 +61,13 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&clock_ksz8081_out>;
+	clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "enet1_ref_pad";
+	assigned-clocks = <&clks IMX6UL_CLK_ENET1_REF_SEL>;
+	assigned-clock-parents = <&clock_ksz8081_out>;
+};
+
 &ecspi1 {
 	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
@@ -85,12 +93,6 @@
 	pinctrl-0 = <&pinctrl_eth1>;
 	phy-mode = "rmii";
 	phy-handle = <&rmii_phy>;
-	clocks = <&clks IMX6UL_CLK_ENET>,
-		 <&clks IMX6UL_CLK_ENET_AHB>,
-		 <&clks IMX6UL_CLK_ENET_PTP>,
-		 <&clock_ksz8081_out>;
-	clock-names = "ipg", "ahb", "ptp",
-		      "enet_clk_ref";
 	status = "okay";
 
 	mdio {
@@ -175,6 +177,7 @@
 
 &usbotg1 {
 	dr_mode = "host";
+	over-current-active-low;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi
index eca94ed6451b..2dd635a615cb 100644
--- a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi
@@ -116,8 +116,8 @@
 		};
 	};
 
-	jc42_1a: eeprom-temperature-sensor@1a {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	jc42_1a: eeprom-temperature@1a {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1a>;
 	};
 
@@ -162,13 +162,18 @@
 	status = "okay";
 
 	flash0: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		spi-max-frequency = <33000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <1>;
-		reg = <0>;
+		vcc-supply = <&reg_vldo4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
@@ -202,7 +207,7 @@
 		>;
 	};
 
-	pinctrl_pmic: pmic {
+	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			/* PMIC irq */
 			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x1b099
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts
index f2a5f17f312e..2e7b96e7b791 100644
--- a/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts
@@ -6,8 +6,9 @@
 
 /dts-v1/;
 
-#include "imx6ul-tqma6ul1.dtsi"
+#include "imx6ul-tqma6ul2.dtsi"
 #include "mba6ulx.dtsi"
+#include "imx6ul-tqma6ul1.dtsi"
 
 / {
 	model = "TQ-Systems TQMa6UL1 SoM on MBa6ULx board";
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi
index 24192d012ef7..79c8c5529135 100644
--- a/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi
@@ -4,8 +4,6 @@
  * Author: Markus Niebel <Markus.Niebel@tq-group.com>
  */
 
-#include "imx6ul-tqma6ul2.dtsi"
-
 / {
 	model = "TQ-Systems TQMa6UL1 SoM";
 	compatible = "tq,imx6ul-tqma6ul1", "fsl,imx6ul";
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx.dts
index 0757df2b8f48..0757df2b8f48 100644
--- a/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx.dts
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2.dtsi
index e2e95dd92263..e2e95dd92263 100644
--- a/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2.dtsi
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l-mba6ulx.dts
index 9d9b6b744a1c..9d9b6b744a1c 100644
--- a/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l-mba6ulx.dts
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l.dtsi
index 4b87e2dc70dc..4b87e2dc70dc 100644
--- a/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l.dtsi
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulx-common.dtsi
index 5afb9046c202..5afb9046c202 100644
--- a/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulx-common.dtsi
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulxl-common.dtsi
index ba84a4f70ebd..ba84a4f70ebd 100644
--- a/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulxl-common.dtsi
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts
new file mode 100644
index 000000000000..188f3a2a312f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-tx6ul.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TXUL-0010 Module";
+	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
+
+	aliases {
+		/delete-property/ mmc1;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts
new file mode 100644
index 000000000000..247a0aab7791
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-tx6ul.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TXUL-0011 Module";
+	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc1;
+	};
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	fsl,wp-controller;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts
new file mode 100644
index 000000000000..84b45542814e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-tx6ul.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TXUL-0010 Module on TXUL Mainboard";
+	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
+
+	aliases {
+		lcdif-24bit-pins-a = &pinctrl_disp0_3;
+		mmc0 = &usdhc1;
+		/delete-property/ mmc1;
+		serial2 = &uart3;
+		serial4 = &uart5;
+	};
+	/delete-node/ sound;
+};
+
+&can1 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&fec1 {
+	pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>;
+	/delete-node/ mdio;
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	phy-supply = <&reg_3v3_etn>;
+	phy-handle = <&etnphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		etnphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy0_int>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			interrupts-extended = <&gpio5 5 IRQ_TYPE_EDGE_FALLING>;
+			status = "okay";
+		};
+
+		etnphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy1_int>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			interrupts-extended = <&gpio4 27 IRQ_TYPE_EDGE_FALLING>;
+			status = "okay";
+		};
+	};
+};
+
+&i2c_gpio {
+	status = "disabled";
+};
+
+&i2c2 {
+	/delete-node/ codec@a;
+	/delete-node/ touchscreen@48;
+
+	rtc: rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&lcdif {
+	pinctrl-0 = <&pinctrl_disp0_3>;
+};
+
+&reg_usbotg_vbus {
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	/delete-property/ cd-gpios;
+	cap-sdio-irq;
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	/delete-property/ uart-has-rtscts;
+};
+
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+	/delete-property/ uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	status = "disabled"; /* conflicts with LCDIF */
+};
+
+&iomuxc {
+	hoggrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x0b0b0 /* WLAN_RESET */
+		>;
+	};
+
+	pinctrl_disp0_3: disp0-3-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x10 /* HSYNC */
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x10 /* VSYNC */
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x10
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x10
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x10
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x10
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x10
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x10
+			/* LCD_DATA08..09 not wired */
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x10
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x10
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x10
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x10
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x10
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x10
+			/* LCD_DATA16..17 not wired */
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x10
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x10
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x10
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x10
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x10
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x10
+		>;
+	};
+
+	pinctrl_enet2_mdio: enet2-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x0b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x0b0b0
+			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA16__UART7_DCE_TX	0x0b0b0
+			MX6UL_PAD_LCD_DATA17__UART7_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA20__UART8_DCE_TX	0x0b0b0
+			MX6UL_PAD_LCD_DATA21__UART8_DCE_RX	0x0b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
index c485d058e079..1992dfb53b45 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -108,16 +72,14 @@
 		default-brightness-level = <50>;
 	};
 
-	i2c_gpio: i2c-gpio {
+	i2c_gpio: i2c {
 		compatible = "i2c-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_gpio>;
-		gpios = <
-			&gpio5 1 GPIO_ACTIVE_HIGH /* SDA */
-			&gpio5 0 GPIO_ACTIVE_HIGH /* SCL */
-		>;
+		sda-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
 		clock-frequency = <400000>;
 		status = "okay";
 
@@ -131,7 +93,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		user_led: user {
+		user_led: led-user {
 			label = "Heartbeat";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_led>;
@@ -212,15 +174,15 @@
 		enable-active-high;
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_spi_gpio>;
-		gpio-mosi = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-		gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <2>;
 		cs-gpios = <
 			&gpio1 29 GPIO_ACTIVE_HIGH
@@ -284,7 +246,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>;
 	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
 	phy-supply = <&reg_3v3_etn>;
 	phy-handle = <&etnphy0>;
 	status = "okay";
@@ -300,6 +261,11 @@
 			pinctrl-0 = <&pinctrl_etnphy0_int>;
 			interrupt-parent = <&gpio5>;
 			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <100>;
+			reset-deassert-us = <25000>;
+			/* Energy detect sometimes causes link failures */
+			smsc,disable-energy-detect;
 			status = "okay";
 		};
 
@@ -310,6 +276,9 @@
 			pinctrl-0 = <&pinctrl_etnphy1_int>;
 			interrupt-parent = <&gpio4>;
 			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <100>;
+			reset-deassert-us = <25000>;
 			status = "okay";
 		};
 	};
@@ -319,7 +288,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>;
 	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
 	phy-supply = <&reg_3v3_etn>;
 	phy-handle = <&etnphy1>;
 	status = "disabled";
@@ -407,7 +375,7 @@
 		status = "okay";
 
 		display-timings {
-			VGA {
+			timing-vga {
 				clock-frequency = <25200000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -423,7 +391,7 @@
 				pixelclk-active = <1>;
 			};
 
-			ETV570 {
+			timing-etv570 {
 				clock-frequency = <25200000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -439,7 +407,7 @@
 				pixelclk-active = <1>;
 			};
 
-			ET0350 {
+			timing-et0350 {
 				clock-frequency = <6413760>;
 				hactive = <320>;
 				vactive = <240>;
@@ -455,7 +423,7 @@
 				pixelclk-active = <1>;
 			};
 
-			ET0430 {
+			timing-et0430 {
 				clock-frequency = <9009000>;
 				hactive = <480>;
 				vactive = <272>;
@@ -471,7 +439,7 @@
 				pixelclk-active = <0>;
 			};
 
-			ET0500 {
+			timing-et0500 {
 				clock-frequency = <33264000>;
 				hactive = <800>;
 				vactive = <480>;
@@ -487,7 +455,7 @@
 				pixelclk-active = <1>;
 			};
 
-			ET0700 { /* same as ET0500 */
+			timing-et0700 { /* same as ET0500 */
 				clock-frequency = <33264000>;
 				hactive = <800>;
 				vactive = <480>;
@@ -503,7 +471,7 @@
 				pixelclk-active = <1>;
 			};
 
-			ETQ570 {
+			timing-etq570 {
 				clock-frequency = <6596040>;
 				hactive = <320>;
 				vactive = <240>;
@@ -580,19 +548,13 @@
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_hog: hoggrp {
-	};
-
 	pinctrl_led: ledgrp {
 		fsl,pins = <
 			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x0b0b0 /* LED */
 		>;
 	};
 
-	pinctrl_disp0_1: disp0grp-1 {
+	pinctrl_disp0_1: disp0-1-grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
 			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
@@ -625,7 +587,7 @@
 		>;
 	};
 
-	pinctrl_disp0_2: disp0grp-2 {
+	pinctrl_disp0_2: disp0-2-grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
 			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
@@ -715,25 +677,25 @@
 		>;
 	};
 
-	pinctrl_etnphy0_int: etnphy-intgrp-0 {
+	pinctrl_etnphy0_int: etnphy-int-0-grp {
 		fsl,pins = <
 			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0b0 /* ETN PHY INT */
 		>;
 	};
 
-	pinctrl_etnphy0_rst: etnphy-rstgrp-0 {
+	pinctrl_etnphy0_rst: etnphy-rst-0-grp {
 		fsl,pins = <
 			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x0b0b0 /* ETN PHY RESET */
 		>;
 	};
 
-	pinctrl_etnphy1_int: etnphy-intgrp-1 {
+	pinctrl_etnphy1_int: etnphy-int-1-grp {
 		fsl,pins = <
 			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x0b0b0 /* ETN PHY INT */
 		>;
 	};
 
-	pinctrl_etnphy1_rst: etnphy-rstgrp-1 {
+	pinctrl_etnphy1_rst: etnphy-rst-1-grp {
 		fsl,pins = <
 			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x0b0b0 /* ETN PHY RESET */
 		>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts
new file mode 100644
index 000000000000..9ff3b374a2b3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for Variscite MX6 Concerto Carrier board with the VAR-SOM-MX6UL
+ * Variscite SoM mounted on it
+ *
+ * Copyright 2019 Variscite Ltd.
+ * Copyright 2025 Bootlin
+ */
+
+#include "imx6ul-var-som.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Variscite VAR-SOM-MX6UL Concerto Board";
+	compatible = "variscite,mx6ulconcerto", "variscite,var-som-imx6ul", "fsl,imx6ul";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_key_back>, <&pinctrl_gpio_key_wakeup>;
+
+		key-back {
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-wakeup {
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "gpled2";
+			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&fec1 {
+	status = "disabled";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_gpio>, <&pinctrl_enet2_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			clocks = <&rmii_ref_clk>;
+			clock-names = "rmii-ref";
+			reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <100000>;
+			micrel,led-mode = <0>;
+			micrel,rmii-reference-clock-select-25-mhz = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	rtc@68 {
+		/*
+		 * To actually use this interrupt
+		 * connect pins J14.8 & J14.10 on the Concerto-Board.
+		 */
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&iomuxc {
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+		>;
+	};
+
+	pinctrl_enet2_gpio: enet2-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0 /* fec2 reset */
+		>;
+	};
+
+	pinctrl_enet2_mdio: enet2-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpio_key_back: gpio-key-backgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x17059
+		>;
+	};
+
+	pinctrl_gpio_leds: gpio-ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x1b0b0	/* GPLED2 */
+		>;
+	};
+
+	pinctrl_gpio_key_wakeup: gpio-keys-wakeupgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x17059
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__PWM4_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x1b0b0 /* RTC alarm IRQ */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA00__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_CSI_DATA01__UART5_DCE_RX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
+			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x17059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0x1b0b1 /* CD */
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B	0x78b0
+		>;
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "disabled";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&tsc {
+	/*
+	 * Conflics with wdog1 ext-reset-output & SD CD pins,
+	 * so we keep it disabled by default.
+	 */
+	status = "disabled";
+};
+
+/* Console UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* ttymxc4 UART */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	/*
+	 * To actually use ext-reset-output
+	 * connect pins J17.3 & J17.8 on the Concerto-Board
+	 */
+	fsl,ext-reset-output;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi
new file mode 100644
index 000000000000..4e536e0252de
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for Variscite VAR-SOM-MX6UL Module
+ *
+ * Copyright 2019 Variscite Ltd.
+ * Copyright 2025 Bootlin
+ */
+
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Variscite VAR-SOM-MX6UL module";
+	compatible = "variscite,var-som-imx6ul", "fsl,imx6ul";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_gpio_dvfs: reg-gpio-dvfs {
+		compatible = "regulator-gpio";
+		regulator-min-microvolt = <1300000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-name = "gpio_dvfs";
+		regulator-type = "voltage";
+		gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+		states = <1300000 0x1
+			  1400000 0x0>;
+	};
+
+	rmii_ref_clk: rmii-ref-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "rmii-ref";
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&cpu0 {
+	dc-supply = <&reg_gpio_dvfs>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_gpio>, <&pinctrl_enet1_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			clocks = <&rmii_ref_clk>;
+			clock-names = "rmii-ref";
+			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <100000>;
+			micrel,led-mode = <1>;
+			micrel,rmii-reference-clock-select-25-mhz = <1>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_enet1_gpio: enet1-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0 /* fec1 reset */
+		>;
+	};
+
+	pinctrl_enet1_mdio: enet1-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x1b0b0	/* BT Enable */
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x03029	/* WLAN Enable */
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170b9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170b9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170b9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+};
+
+&pxp {
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+			  <&clks IMX6UL_CLK_SAI2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	measure-delay-time = <0xffff>;
+	pre-charge-time = <0xfff>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
index c95efd1d8c2d..6de224dd2bb9 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
@@ -164,14 +164,13 @@
 			      <0x00a06000 0x2000>;
 		};
 
-		dma_apbh: dma-apbh@1804000 {
+		dma_apbh: dma-controller@1804000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x01804000 0x2000>;
 			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 			#dma-cells = <1>;
 			dma-channels = <4>;
 			clocks = <&clks IMX6UL_CLK_APBHDMA>;
@@ -180,7 +179,7 @@
 		gpmi: nand-controller@1806000 {
 			compatible = "fsl,imx6q-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x01806000 0x2000>, <0x01808000 0x2000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -275,6 +274,8 @@
 					clocks = <&clks IMX6UL_CLK_UART7_IPG>,
 						 <&clks IMX6UL_CLK_UART7_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 43 4 0>, <&sdma 44 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -286,6 +287,8 @@
 					clocks = <&clks IMX6UL_CLK_UART1_IPG>,
 						 <&clks IMX6UL_CLK_UART1_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -297,6 +300,8 @@
 					clocks = <&clks IMX6UL_CLK_UART8_IPG>,
 						 <&clks IMX6UL_CLK_UART8_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 45 4 0>, <&sdma 46 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -365,13 +370,13 @@
 						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 						    "txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
+					fsl,asrc-rate = <48000>;
 					fsl,asrc-width = <16>;
 					status = "okay";
 				};
 			};
 
-			tsc: tsc@2040000 {
+			tsc: touchscreen@2040000 {
 				compatible = "fsl,imx6ul-tsc";
 				reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
@@ -532,14 +537,15 @@
 				clocks = <&clks IMX6UL_CLK_ENET>,
 					 <&clks IMX6UL_CLK_ENET_AHB>,
 					 <&clks IMX6UL_CLK_ENET_PTP>,
-					 <&clks IMX6UL_CLK_ENET2_REF_125M>,
-					 <&clks IMX6UL_CLK_ENET2_REF_125M>;
+					 <&clks IMX6UL_CLK_ENET2_REF_SEL>;
 				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref", "enet_out";
+					      "enet_clk_ref";
 				fsl,num-tx-queues = <1>;
 				fsl,num-rx-queues = <1>;
 				fsl,stop-mode = <&gpr 0x10 4>;
 				fsl,magic-packet;
+				nvmem-cells = <&fec2_mac_addr>;
+				nvmem-cell-names = "mac-address";
 				status = "disabled";
 			};
 
@@ -640,6 +646,7 @@
 					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
 					nvmem-cell-names = "calib", "temp_grade";
 					clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+					#thermal-sensor-cells = <0>;
 				};
 			};
 
@@ -721,6 +728,18 @@
 				#interrupt-cells = <3>;
 				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&intc>;
+				clocks = <&clks IMX6UL_CLK_IPG>;
+				clock-names = "ipg";
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@0 {
+						reg = <0>;
+						#power-domain-cells = <0>;
+					};
+				};
 			};
 
 			iomuxc: pinctrl@20e0000 {
@@ -744,7 +763,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@20ec000 {
+			sdma: dma-controller@20ec000 {
 				compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
 					     "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
@@ -845,7 +864,6 @@
 				clocks = <&clks IMX6UL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
 				rx-burst-size-dword = <0x10>;
@@ -880,14 +898,15 @@
 				clocks = <&clks IMX6UL_CLK_ENET>,
 					 <&clks IMX6UL_CLK_ENET_AHB>,
 					 <&clks IMX6UL_CLK_ENET_PTP>,
-					 <&clks IMX6UL_CLK_ENET_REF>,
-					 <&clks IMX6UL_CLK_ENET_REF>;
+					 <&clks IMX6UL_CLK_ENET1_REF_SEL>;
 				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref", "enet_out";
+					      "enet_clk_ref";
 				fsl,num-tx-queues = <1>;
 				fsl,num-rx-queues = <1>;
 				fsl,stop-mode = <&gpr 0x10 3>;
 				fsl,magic-packet;
+				nvmem-cells = <&fec1_mac_addr>;
+				nvmem-cell-names = "mac-address";
 				status = "disabled";
 			};
 
@@ -966,7 +985,7 @@
 				clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>;
 			};
 
-			weim: weim@21b8000 {
+			weim: memory-controller@21b8000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
@@ -995,6 +1014,14 @@
 				cpu_speed_grade: speed-grade@10 {
 					reg = <0x10 4>;
 				};
+
+				fec1_mac_addr: mac-addr@88 {
+					reg = <0x88 6>;
+				};
+
+				fec2_mac_addr: mac-addr@8e {
+					reg = <0x8e 6>;
+				};
 			};
 
 			csi: csi@21c4000 {
@@ -1054,6 +1081,8 @@
 				clocks = <&clks IMX6UL_CLK_UART2_IPG>,
 					 <&clks IMX6UL_CLK_UART2_SERIAL>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -1065,6 +1094,8 @@
 				clocks = <&clks IMX6UL_CLK_UART3_IPG>,
 					 <&clks IMX6UL_CLK_UART3_SERIAL>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -1076,6 +1107,8 @@
 				clocks = <&clks IMX6UL_CLK_UART4_IPG>,
 					 <&clks IMX6UL_CLK_UART4_SERIAL>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -1087,6 +1120,8 @@
 				clocks = <&clks IMX6UL_CLK_UART5_IPG>,
 					 <&clks IMX6UL_CLK_UART5_SERIAL>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -1108,6 +1143,8 @@
 				clocks = <&clks IMX6UL_CLK_UART6_IPG>,
 					 <&clks IMX6UL_CLK_UART6_SERIAL>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-14x14-evk.dts
index 74aaa8a56a3d..74aaa8a56a3d 100644
--- a/arch/arm/boot/dts/imx6ull-14x14-evk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-14x14-evk.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dts
new file mode 100644
index 000000000000..3e0897c3a296
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Aster";
+	compatible = "toradex,colibri-imx6ull-aster",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
+
+/* PWM <C> */
+&pwm6 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi
index c9133ba2d705..e75dad0f0e23 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi
@@ -13,7 +13,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
 
-		power {
+		key-power {
 			label = "Wake-Up";
 			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
@@ -130,11 +130,13 @@
 };
 
 &usbotg1 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-aster.dts
index 919c0464d6cb..b2cdf4877718 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-aster.dts
@@ -12,6 +12,5 @@
 	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Aster";
 	compatible = "toradex,colibri-imx6ull-emmc-aster",
 		     "toradex,colibri-imx6ull-emmc",
-		     "toradex,colibri-imx6ull",
 		     "fsl,imx6ull";
 };
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-eval-v3.dts
index 61b93cb040c7..2dc16c54fc78 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-eval-v3.dts
@@ -12,6 +12,5 @@
 	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Evaluation Board V3";
 	compatible = "toradex,colibri-imx6ull-emmc-eval",
 		     "toradex,colibri-imx6ull-emmc",
-		     "toradex,colibri-imx6ull",
 		     "fsl,imx6ull";
 };
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-iris-v2.dts
index b9060c2f7977..9bae08fb7f85 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-iris-v2.dts
@@ -10,8 +10,7 @@
 
 / {
 	model = "Toradex Colibri iMX6ULL 1G (eMMC) on Colibri Iris V2";
-	compatible = "toradex,colibri-imx6ull-iris-v2",
+	compatible = "toradex,colibri-imx6ull-emmc-iris-v2",
 		     "toradex,colibri-imx6ull-emmc",
-		     "toradex,colibri-imx6ull",
 		     "fsl,imx6ull";
 };
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-iris.dts
index 0ab71f2f5daa..0b1603ff9420 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-iris.dts
@@ -12,6 +12,5 @@
 	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Iris";
 	compatible = "toradex,colibri-imx6ull-emmc-iris",
 		     "toradex,colibri-imx6ull-emmc",
-		     "toradex,colibri-imx6ull",
 		     "fsl,imx6ull";
 };
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-nonwifi.dtsi
index ea238525d5c0..ea238525d5c0 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-nonwifi.dtsi
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-eval-v3.dts
new file mode 100644
index 000000000000..c5bc255b21e1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-eval-v3.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx6ull-eval", "toradex,colibri-imx6ull", "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-eval-v3.dtsi
index e29907428c20..692ef26fbab3 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-eval-v3.dtsi
@@ -106,11 +106,13 @@
 };
 
 &usbotg1 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris-v2.dts
new file mode 100644
index 000000000000..f6b31118be17
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris-v2.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256M/512B on Colibri Iris V2";
+	compatible = "toradex,colibri-imx6ull-iris-v2",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&gpio1 {
+	/* This turns the LVDS transceiver on */
+	lvds-power-on-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+		line-name = "LVDS_POWER_ON";
+		output-high;
+	};
+};
+
+&gpio2 {
+	/*
+	 * This switches the LVDS transceiver to the single-channel
+	 * output mode.
+	 */
+	lvds-ch-mode-hog {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+		line-name = "LVDS_CH_MODE";
+		output-high;
+	};
+
+	/*
+	 * This switches the LVDS transceiver to the 24-bit RGB mode.
+	 */
+	lvds-rgb-mode-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+		line-name = "LVDS_RGB_MODE";
+		output-low;
+	};
+};
+
+&gpio5 {
+	/*
+	 * This switches the LVDS transceiver to VESA color mapping mode.
+	 */
+	lvds-color-map-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+		line-name = "LVDS_COLOR_MAP";
+		output-low;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
+
+/* PWM <C> */
+&pwm6 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris-v2.dtsi
index 93649cad0cc0..93649cad0cc0 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris-v2.dtsi
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dts
new file mode 100644
index 000000000000..2a0d0fc3b9d6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Iris";
+	compatible = "toradex,colibri-imx6ull-iris",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
index 7f3b37baba88..bce6fbf230b3 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
@@ -13,7 +13,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
 
-		power {
+		key-power {
 			label = "Wake-Up";
 			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
@@ -59,7 +59,7 @@
 	 * in userspace.
 	 * The same applies to uart1_tx_on.
 	 */
-	uart25_tx_on {
+	uart25_tx_on-hog {
 		gpio-hog;
 		gpios = <15 0>;
 		output-high;
@@ -67,7 +67,7 @@
 };
 
 &gpio2 {
-	uart1_tx_on {
+	uart1_tx_on-hog {
 		gpio-hog;
 		gpios = <7 0>;
 		output-high;
@@ -117,11 +117,13 @@
 };
 
 &usbotg1 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-nonwifi.dtsi
index 88901db255d6..88901db255d6 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-nonwifi.dtsi
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-aster.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-aster.dts
new file mode 100644
index 000000000000..d3bbd05da293
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-aster.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 512MB on Colibri Aster";
+	compatible = "toradex,colibri-imx6ull-wifi-aster",
+		     "toradex,colibri-imx6ull-wifi",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
+
+/* PWM <C> */
+&pwm6 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-eval-v3.dts
new file mode 100644
index 000000000000..0ac306c9cef2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-eval-v3.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 512MB on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx6ull-wifi-eval", "toradex,colibri-imx6ull-wifi", "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-iris-v2.dts
index ce02f8a9ddd3..38cd52c45496 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-iris-v2.dts
@@ -11,17 +11,25 @@
 / {
 	model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris V2";
 	compatible = "toradex,colibri-imx6ull-wifi-iris-v2",
-		     "toradex,colibri-imx6ull",
+		     "toradex,colibri-imx6ull-wifi",
 		     "fsl,imx6ull";
 };
 
+&ad7879_ts {
+	status = "okay";
+};
+
 &atmel_mxt_ts {
 	status = "okay";
 };
 
+&backlight {
+	status = "okay";
+};
+
 &gpio1 {
 	/* This turns the LVDS transceiver on */
-	lvds-power-on {
+	lvds-power-on-hog {
 		gpio-hog;
 		gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
 		line-name = "LVDS_POWER_ON";
@@ -34,7 +42,7 @@
 	 * This switches the LVDS transceiver to the single-channel
 	 * output mode.
 	 */
-	lvds-ch-mode {
+	lvds-ch-mode-hog {
 		gpio-hog;
 		gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
 		line-name = "LVDS_CH_MODE";
@@ -44,7 +52,7 @@
 	/*
 	 * This switches the LVDS transceiver to the 24-bit RGB mode.
 	 */
-	lvds-rgb-mode {
+	lvds-rgb-mode-hog {
 		gpio-hog;
 		gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
 		line-name = "LVDS_RGB_MODE";
@@ -56,10 +64,26 @@
 	/*
 	 * This switches the LVDS transceiver to VESA color mapping mode.
 	 */
-	lvds-color-map {
+	lvds-color-map-hog {
 		gpio-hog;
 		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
 		line-name = "LVDS_COLOR_MAP";
 		output-low;
 	};
 };
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-iris.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-iris.dts
new file mode 100644
index 000000000000..5f60df64f173
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-iris.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris";
+	compatible = "toradex,colibri-imx6ull-wifi-iris",
+		     "toradex,colibri-imx6ull-wifi",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi.dtsi
index db59ee6b1c86..db59ee6b1c86 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi.dtsi
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi
index 577a424b0e1d..ec3c1e7301f4 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi
@@ -21,7 +21,23 @@
 		pinctrl-0 = <&pinctrl_gpio_bl_on>;
 		power-supply = <&reg_3v3>;
 		pwms = <&pwm4 0 5000000 1>;
-		status = "okay";
+		status = "disabled";
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_usbc_det>;
+		id-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+		label = "USBC";
+		self-powered;
+		type = "micro";
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
 	};
 
 	gpio-keys {
@@ -29,9 +45,9 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
 
-		wakeup {
+		key-wakeup {
 			debounce-interval = <10>;
-			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
+			gpios = <&gpio5 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
 			label = "Wake-Up";
 			linux,code = <KEY_WAKEUP>;
 			wakeup-source;
@@ -42,7 +58,7 @@
 		compatible = "edt,et057090dhu";
 		backlight = <&backlight>;
 		power-supply = <&reg_3v3>;
-		status = "okay";
+		status = "disabled";
 
 		port {
 			lcd_panel_in: endpoint {
@@ -86,7 +102,6 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-name = "+V3.3_ETH";
-		regulator-type = "voltage";
 		vin-supply = <&reg_module_3v3>;
 		clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
 		startup-delay-us = <150000>;
@@ -159,7 +174,7 @@
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
 	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
+	status = "disabled";
 
 	/* Atmel maxtouch controller */
 	atmel_mxt_ts: touchscreen@4a {
@@ -202,6 +217,7 @@
 		adi,median-filter-size = /bits/ 8 <2>;
 		adi,averaging = /bits/ 8 <1>;
 		adi,conversion-interval = /bits/ 8 <255>;
+		status = "disabled";
 	};
 };
 
@@ -209,6 +225,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lcdif_dat
 		     &pinctrl_lcdif_ctrl>;
+	status = "disabled";
 
 	port {
 		lcdif_out: endpoint {
@@ -278,6 +295,13 @@
 	srp-disable;
 	hnp-disable;
 	adp-disable;
+	usb-role-switch;
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
 };
 
 /* Colibri USBH */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-drc02.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-drc02.dts
new file mode 100644
index 000000000000..b539975a872c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-drc02.dts
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ *
+ * DHCOM iMX6ULL variant:
+ * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-SD-RTC-ADC-I-01D2
+ * DHCOR PCB number: 578-200 or newer
+ * DHCOM PCB number: 579-200 or newer
+ * DRC02 PCB number: 568-100 or newer (2nd ethernet by SoM)
+ */
+/dts-v1/;
+
+#include "imx6ull-dhcom-som.dtsi"
+#include "imx6ull-dhcom-som-cfg-sdcard.dtsi"
+
+/ {
+	model = "DH electronics i.MX6ULL DHCOM on DRC02";
+	compatible = "dh,imx6ull-dhcom-drc02", "dh,imx6ull-dhcom-som",
+		     "dh,imx6ull-dhcor-som", "fsl,imx6ull";
+};
+
+/*
+ * The signals for CAN2 TX and RX are routed to the DHCOM UART1 RTS/CTS pins.
+ * Therefore the UART RTS/CTS must be output on other DHCOM pins, see uart1
+ * node below.
+ */
+&can2 {
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "DRC02-In2",
+		"", "", "", "",
+		"", "", "DHCOM-I", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "DRC02-HW0", "DRC02-HW1", "DHCOM-M",
+		"DRC02-HW2", "DHCOM-U", "DHCOM-T", "DHCOM-S",
+		"DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O",
+		"DHCOM-N", "", "", "";
+	/*
+	 * NOTE: On DRC02, the RS485_RX_En is controlled by a separate
+	 * GPIO line, however the i.MX6ULL UART driver assumes RX happens
+	 * during TX anyway and that it only controls drive enable DE
+	 * line. Hence, the RX is always enabled here.
+	 */
+	rs485-rx-en-hog {
+		gpio-hog;
+		gpios = <25 0>; /* GPIO Q */
+		line-name = "rs485-rx-en";
+		output-low;
+	};
+};
+
+&gpio5 {
+	gpio-line-names =
+		"DHCOM-A", "DHCOM-B", "DHCOM-C", "DRC02-Out2",
+		"DHCOM-E", "", "", "DRC02-Out1",
+		"DRC02-In1", "DHCOM-H", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+/* DHCOM I2C2 */
+&i2c1 {
+	eeprom@56 {
+		compatible = "atmel,24c04";
+		reg = <0x56>;
+		pagesize = <16>;
+	};
+};
+
+&uart1 {
+	/delete-property/ uart-has-rtscts;
+	rts-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */
+	cts-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; /* GPIO M */
+};
+
+/* Use UART as RS485 */
+&uart2 {
+	/delete-property/ uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rts-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* GPIO P */
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts
new file mode 100644
index 000000000000..b29713831a74
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ *
+ * DHCOM iMX6ULL variant:
+ * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-RTC-WBT-ADC-I-01D2
+ * DHCOR PCB number: 578-200 or newer
+ * DHCOM PCB number: 579-200 or newer
+ * PDK2 PCB number: 516-400 or newer
+ */
+/dts-v1/;
+
+#include "imx6ull-dhcom-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX6ULL DHCOM on Premium Developer Kit (2)";
+	compatible = "dh,imx6ull-dhcom-pdk2", "dh,imx6ull-dhcom-som",
+		     "dh,imx6ull-dhcor-som", "fsl,imx6ull";
+
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	display_bl: display-bl {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
+		default-brightness-level = <8>;
+		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; /* GPIO G */
+		power-supply = <&reg_panel_3v3>;
+		pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* GPIO A */
+			label = "TA1-GPIO-A";
+			linux,code = <KEY_A>;
+			wakeup-source;
+		};
+
+		button-1 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; /* GPIO B */
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			wakeup-source;
+		};
+
+		button-2 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
+			label = "TA3-GPIO-C";
+			linux,code = <KEY_C>;
+			wakeup-source;
+		};
+
+		button-3 {
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; /* GPIO D */
+			label = "TA4-GPIO-D";
+			linux,code = <KEY_D>;
+			wakeup-source;
+		};
+	};
+
+	led: led {
+		compatible = "gpio-leds";
+
+		/*
+		 * Disable PDK2 LED5, because GPIO E is
+		 * already used as touch interrupt.
+		 */
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <5>; /* PDK2 LED5 */
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; /* GPIO E */
+			status = "disabled";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <6>; /* PDK2 LED6 */
+			gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; /* GPIO F */
+		};
+
+		/*
+		 * Disable PDK2 LED7, because GPIO H is
+		 * already used for WiFi pin WL_REG_ON.
+		 */
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <7>; /* PDK2 LED7 */
+			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* GPIO H */
+			status = "disabled";
+		};
+
+		/*
+		 * Disable PDK2 LED8, because GPIO I is
+		 * already used for BT pin BT_REG_ON.
+		 */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <8>; /* PDK2 LED8 */
+			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			status = "disabled";
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0edh6";
+		backlight = <&display_bl>;
+		power-supply = <&reg_panel_3v3>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	/* Filtered supply voltage */
+	reg_pdk2_24v: regulator-pdk2-24v {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <24000000>;
+		regulator-min-microvolt = <24000000>;
+		regulator-name = "24V_PDK2";
+	};
+
+	/* PDK2 U35 */
+	reg_pdk2_3v3: regulator-pdk2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3V3_PDK2";
+		vin-supply = <&reg_pdk2_24v>;
+	};
+
+	/* 560-200 U1 */
+	reg_panel_3v3: regulator-panel-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3V3_PANEL";
+		vin-supply = <&reg_pdk2_24v>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,name = "sgtl5000";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT";
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			clocks = <&clk_ext_audio_codec>;
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+/* DHCOM I2C1 */
+&i2c2 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_ext_audio_codec>;
+		VDDA-supply = <&reg_pdk2_3v3>;
+		VDDIO-supply = <&reg_pdk2_3v3>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+		power-supply = <&reg_panel_3v3>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+
+	port {
+		lcd_display_out: endpoint {
+			remote-endpoint = <&lcd_panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-picoitx.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-picoitx.dts
new file mode 100644
index 000000000000..e4cc2223583a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-picoitx.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ *
+ * DHCOM iMX6ULL variant:
+ * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-SD-RTC-ADC-I-01D2
+ * DHCOR PCB number: 578-200 or newer
+ * DHCOM PCB number: 579-200 or newer
+ * PicoITX PCB number: 487-600 or newer
+ */
+/dts-v1/;
+
+#include "imx6ull-dhcom-som.dtsi"
+#include "imx6ull-dhcom-som-cfg-sdcard.dtsi"
+
+/ {
+	model = "DH electronics i.MX6ULL DHCOM on PicoITX";
+	compatible = "dh,imx6ull-dhcom-picoitx", "dh,imx6ull-dhcom-som",
+		     "dh,imx6ull-dhcor-som", "fsl,imx6ull";
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_YELLOW>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+		};
+	};
+};
+
+&fec1 {
+	phy-handle = <&mdio1_phy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio1_phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-id0007.c0f0", /* SMSC LAN8710Ai */
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			clock-names = "rmii-ref";
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_fec1_phy &pinctrl_snvs_fec1_phy>;
+			pinctrl-names = "default";
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
+			reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
+		};
+	};
+};
+
+&fec2 {
+	status = "disabled";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "PicoITX-HW2", "PicoITX-HW1", "DHCOM-M",
+		"PicoITX-HW0", "DHCOM-U", "DHCOM-T", "DHCOM-S",
+		"DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O",
+		"DHCOM-N", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"DHCOM-A", "DHCOM-B", "PicoITX-In2", "PicoITX-Out2",
+		"PicoITX-In1", "", "", "PicoITX-Out1",
+		"DHCOM-G", "DHCOM-H", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b010
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b010
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi
new file mode 100644
index 000000000000..5e39f8dc1351
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ */
+
+/*
+ * Special SoM configuration: SD card
+ *
+ * Enabled:  Micro SD card on module or
+ *           external SD card via DHCOM depends on hardware variant
+ *           GPIO H and GPIO I will be available
+ *           DHCOM UART2 will be available
+ * Disabled: WiFi and BT
+ */
+
+/*
+ * To use usdhc1 as SD card, the WiFi node must be deleted. The associated
+ * pwrseq node is also deleted in order to ensure that GPIO H is released.
+ * BT is also not available, so remove BT from the UART node.
+ */
+/delete-node/ &brcmf;
+/delete-node/ &usdhc1_pwrseq;
+/delete-node/ &bluetooth;
+
+/ {
+	aliases {
+		mmc1 = &usdhc1;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VSD_3V3";
+	};
+};
+
+/* Micro SD card on module or external SD card via DHCOM */
+&usdhc1 {
+	/delete-property/ #address-cells;
+	/delete-property/ #size-cells;
+	/delete-property/ keep-power-in-suspend;
+	/delete-property/ mmc-pwrseq;
+	/delete-property/ non-removable;
+	/delete-property/ wakeup-source;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x120b0 /* SD1 CD */
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x120b0 /* SD1 CD */
+
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x120b0 /* SD1 CD */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
new file mode 100644
index 000000000000..a74f5273f9b3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
@@ -0,0 +1,631 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ */
+
+#include "imx6ull-dhcor-som.dtsi"
+
+/ {
+	aliases {
+		/delete-property/ spi2;
+		/delete-property/ spi3;
+		i2c0 = &i2c2;
+		i2c1 = &i2c1;
+		mmc2 = &usdhc2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+		serial0 = &uart1;
+		serial1 = &uart6; /* DHCOM UART2, special hardware required */
+		serial2 = &uart3;
+		serial3 = &uart2; /* Use BT UART always as ttymxc3 */
+		serial4 = &uart4;
+		serial5 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi4; /* DHCOM SPI2, special hardware required */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_ext_3v3_ref: regulator-ext-3v3-ref {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCC_3V3_REF";
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-otg1-vbus";
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-otg2-vbus";
+	};
+
+	/* SoM with WiFi/BT: WiFi pin WL_REG_ON is connected to a DHCOM GPIO */
+	usdhc1_pwrseq: usdhc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; /* GPIO H */
+	};
+};
+
+/* SoM with WiFi/BT: BT pin BT_REG_ON is connected to a DHCOM GPIO */
+&bluetooth {
+	shutdown-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */
+};
+
+&can1 {
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/*
+ * The signals for CAN2 TX and RX are routed to the DHCOM UART1 RTS/CTS pins.
+ * Only if this pins are used as CAN interface enable it on board layer.
+ */
+&can2 {
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+};
+
+/* DHCOM SPI1 */
+&ecspi1 {
+	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/*
+ * DHCOM SPI2
+ * Special hardware required that uses the pins of FEC2. Therefore this SPI
+ * interface can only be used if FEC2 is disabled.
+ */
+&ecspi4 {
+	cs-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	pinctrl-names = "default";
+};
+
+/* DHCOM ETH1 */
+&fec1 {
+	phy-handle = <&mdio2_phy0>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* DHCOM ETH2 */
+&fec2 {
+	phy-handle = <&mdio2_phy1>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_fec2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio2_phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-id0007.c0f0", /* SMSC LAN8710Ai */
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			clock-names = "rmii-ref";
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_fec1_phy &pinctrl_snvs_fec1_phy>;
+			pinctrl-names = "default";
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
+			reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
+		};
+
+		mdio2_phy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-id0007.c0f0", /* SMSC LAN8710Ai */
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			clock-names = "rmii-ref";
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_fec2_phy &pinctrl_snvs_fec2_phy>;
+			pinctrl-names = "default";
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
+			reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "DHCOM-INT",
+		"", "", "", "",
+		"", "", "DHCOM-I", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+	pinctrl-0 = <&pinctrl_spi1_switch
+		     &pinctrl_dhcom_i &pinctrl_dhcom_int>;
+	pinctrl-names = "default";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "DHCOM-L", "DHCOM-K", "DHCOM-M",
+		"DHCOM-J", "DHCOM-U", "DHCOM-T", "DHCOM-S",
+		"DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O",
+		"DHCOM-N", "", "", "";
+	pinctrl-0 = <&pinctrl_dhcom_j &pinctrl_dhcom_k
+		     &pinctrl_dhcom_l &pinctrl_dhcom_m
+		     &pinctrl_dhcom_n &pinctrl_dhcom_o
+		     &pinctrl_dhcom_p &pinctrl_dhcom_q
+		     &pinctrl_dhcom_r &pinctrl_dhcom_s
+		     &pinctrl_dhcom_t &pinctrl_dhcom_u>;
+	pinctrl-names = "default";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"DHCOM-A", "DHCOM-B", "DHCOM-C", "DHCOM-D",
+		"DHCOM-E", "", "", "DHCOM-F",
+		"DHCOM-G", "DHCOM-H", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+	pinctrl-0 = <&pinctrl_snvs_dhcom_a &pinctrl_snvs_dhcom_b
+		     &pinctrl_snvs_dhcom_c &pinctrl_snvs_dhcom_d
+		     &pinctrl_snvs_dhcom_e &pinctrl_snvs_dhcom_f
+		     &pinctrl_snvs_dhcom_g &pinctrl_snvs_dhcom_h>;
+	pinctrl-names = "default";
+};
+
+/* DHCOM I2C2 */
+&i2c1 {
+	rtc_i2c: rtc@32 {
+		compatible = "microcrystal,rv8803";
+		reg = <0x32>;
+	};
+
+	/* Microchip 24AA025E48T-I/OT containing MAC for DHCOM ETH1 */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	/* TI ADC101C027 */
+	adc@51 {
+		compatible = "ti,adc101c";
+		reg = <0x51>;
+		vref-supply = <&reg_ext_3v3_ref>;
+	};
+
+	/* TI ADC101C027 */
+	adc@52 {
+		compatible = "ti,adc101c";
+		reg = <0x52>;
+		vref-supply = <&reg_ext_3v3_ref>;
+	};
+
+	/* Microchip 24AA025E48T-I/OT containing MAC for DHCOM ETH2 */
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+};
+
+/* DHCOM I2C1 */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-0 = <&pinctrl_lcdif>;
+	pinctrl-names = "default";
+};
+
+&pwm1 {
+	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-names = "default";
+};
+
+&sai2 {
+	assigned-clock-rates = <320000000>;
+	assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
+	pinctrl-0 = <&pinctrl_sai2>;
+	pinctrl-names = "default";
+};
+
+&tsc {
+	measure-delay-time = <0xffff>;
+	pinctrl-0 = <&pinctrl_tsc>;
+	pinctrl-names = "default";
+	pre-charge-time = <0xfff>;
+	touchscreen-average-samples = <32>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+};
+
+/* DHCOM UART1 */
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/*
+ * DHCOM UART2 (alternative)
+ * Special hardware required that uses DHCOM GPIO pins for DHCOM UART2.
+ * Therefore this UART interface can only be used if DHCOM GPIOs J/K/L/M are
+ * removed from GPIO hog muxing.
+ */
+&uart6 {
+	pinctrl-0 = <&pinctrl_uart6>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&usbotg1 {
+	adp-disable;
+	disable-over-current;
+	dr_mode = "otg";
+	hnp-disable;
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	pinctrl-names = "default";
+	srp-disable;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current; /* Overcurrent pin is used for TSC */
+	dr_mode = "host";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	pinctrl-names = "default";
+	tpl-support;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+/* WiFi on LGA */
+&usdhc1 {
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+};
+
+/* eMMC on module */
+&usdhc2 {
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	/* DHCOM GPIOs I..U + INT_HIGHEST_PRIORITY */
+	pinctrl_dhcom_i: dhcom-i-grp {
+		fsl,pins = <MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x400120b0>;
+	};
+
+	pinctrl_dhcom_j: dhcom-j-grp {
+		fsl,pins = <MX6UL_PAD_CSI_HSYNC__GPIO4_IO20	0x400120b0>;
+	};
+
+	pinctrl_dhcom_k: dhcom-k-grp {
+		fsl,pins = <MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x400120b0>;
+	};
+
+	pinctrl_dhcom_l: dhcom-l-grp {
+		fsl,pins = <MX6UL_PAD_CSI_MCLK__GPIO4_IO17	0x400120b0>;
+	};
+
+	pinctrl_dhcom_m: dhcom-m-grp {
+		fsl,pins = <MX6UL_PAD_CSI_VSYNC__GPIO4_IO19	0x400120b0>;
+	};
+
+	pinctrl_dhcom_n: dhcom-n-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x400120b0>;
+	};
+
+	pinctrl_dhcom_o: dhcom-o-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x400120b0>;
+	};
+
+	pinctrl_dhcom_p: dhcom-p-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x400120b0>;
+	};
+
+	pinctrl_dhcom_q: dhcom-q-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x400120b0>;
+	};
+
+	pinctrl_dhcom_r: dhcom-r-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x400120b0>;
+	};
+
+	pinctrl_dhcom_s: dhcom-s-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x400120b0>;
+	};
+
+	pinctrl_dhcom_t: dhcom-t-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x400120b0>;
+	};
+
+	pinctrl_dhcom_u: dhcom-u-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x400120b0>;
+	};
+
+	pinctrl_dhcom_int: dhcom-int-grp {
+		fsl,pins = <MX6UL_PAD_JTAG_TMS__GPIO1_IO11	0x400120b0>;
+	};
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100b1
+			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x100b1
+			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x100b1
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x1b0b0 /* SS0 */
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4-grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO	0x100b1
+			MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI	0x100b1
+			MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK	0x100b1
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0 /* SS0 */
+		>;
+	};
+
+	pinctrl_fec1: fec1-grp {
+		fsl,pins = <
+			/* FEC1 uses MDIO bus from FEC2 */
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b010
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b010
+		>;
+	};
+
+	pinctrl_fec1_phy: fec1-phy-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0xb0 /* SMSC PHY reset */
+		>;
+	};
+
+	pinctrl_fec2: fec2-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b010
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b010
+		>;
+	};
+
+	pinctrl_fec2_phy: fec2-phy-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA19__GPIO3_IO24	0xb0 /* SMSC PHY reset */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31	0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif: lcdif-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__PWM1_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_sai2: sai2-grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
+		>;
+	};
+
+	pinctrl_tsc: tsc-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart6: uart6-grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x1b0b1
+			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x1b0b1
+			MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS	0x1b0b1
+			MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x120b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B	0x17059 /* SD2 Reset */
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	/* DHCOM GPIOs A..H */
+	pinctrl_snvs_dhcom_a: snvs-dhcom-a-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_b: snvs-dhcom-b-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_c: snvs-dhcom-c-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_d: snvs-dhcom-d-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_e: snvs-dhcom-e-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_f: snvs-dhcom-f-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_g: snvs-dhcom-g-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_h: snvs-dhcom-h-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x400120b0>;
+	};
+
+	pinctrl_snvs_fec1_phy: snvs-fec1-phy-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0xb1 /* SMSC PHY Int */
+		>;
+	};
+
+	pinctrl_snvs_fec2_phy: snvs-fec2-phy-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0xb1 /* SMSC PHY Int */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
new file mode 100644
index 000000000000..047f7b2d8526
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ * Copyright (C) 2023 Marantec electronics GmbH
+ *
+ * DHCOM iMX6ULL variant:
+ * DHCR-iMX6ULL-C080-R051-SPI-WBT-I-01LG
+ * DHCOR PCB number: 578-200 or newer
+ * maveo box PCB number: 525-200 or newer
+ */
+
+/dts-v1/;
+
+#include "imx6ull-dhcor-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX6ULL DHCOR on maveo box";
+	compatible = "marantec,imx6ull-dhcor-maveo-box", "dh,imx6ull-dhcor-som",
+		     "fsl,imx6ull";
+
+	aliases {
+		mmc2 = &usdhc2;
+		spi0 = &ecspi4;
+		spi3 = &ecspi1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-otg1-vbus";
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-otg2-vbus";
+	};
+
+	/* WiFi pin WL_REG_ON is connected to GPIO 5.9 */
+	usdhc1_pwrseq: usdhc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* BT pin BT_REG_ON is connected to GPIO 1.18 */
+&bluetooth {
+	shutdown-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+};
+
+/* X10 connector */
+&ecspi4 {
+	cs-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spidev@0 {
+		compatible = "dh,dhcom-board";
+		reg = <0>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <54000000>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "BUTTON-USER", "", "",
+		"BUTTON-RESET", "", "", "",
+		"", "", "", "",
+		"", "", "BT-REG-ON", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"PSOC-GPIO-1", "", "", "X10-12",
+		"X10-10", "PSOC-GPIO-2", "PSOC-GPIO-3", "",
+		"X10-11", "X10-9", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"DHCOR-HW0", "DHCOR-HW1", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "MAVEO-BOX-HW0", "LED-G", "MAVEO-BOX-VAR1",
+		"MAVEO-BOX-VAR0", "MAVEO-BOX-HW1", "MAVEO-BOX-HW2", "LED-B",
+		"LED-R", "", "", "",
+		"", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"PSOC-SWD-IO", "PSOC-SWD-CLK", "PSOC-RESET", "ZIGBEE-PROG",
+		"ZIGBEE-RESET", "", "PSOC-PWR-FAIL-OUT", "NFC-ENABLE",
+		"NFC-IRQ", "WL-REG-ON", "DHCOR-BOOT-M0", "DHCOR-BOOT-M1",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* Console UART */
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* BT on LGA */
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2 &pinctrl_bt_gpio>;
+};
+
+/* Zigbee UART */
+&uart3 {
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_snvs_zigbee_gpio>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg1 {
+	adp-disable;
+	disable-over-current; /* Overcurrent pin isn't connected */
+	dr_mode = "otg";
+	hnp-disable;
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	pinctrl-names = "default";
+	srp-disable;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current; /* Overcurrent pin isn't connected */
+	dr_mode = "host";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	pinctrl-names = "default";
+	tpl-support;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+/* WiFi on LGA */
+&usdhc1 {
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	pinctrl-0 = <&pinctrl_usdhc1_wifi &pinctrl_snvs_wifi_gpio>;
+};
+
+/* eMMC */
+&usdhc2 {
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog_maveo_box>;
+	pinctrl-names = "default";
+
+	pinctrl_hog_maveo_box: hog-maveo-box-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x120b0    /* BUTTON_USER */
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x120b0    /* BUTTON_RESET */
+			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x400120b0 /* LED_G */
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x400120b0 /* LED_B */
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x400120b0 /* LED_R */
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x400120b0 /* X10_9 */
+			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04	0x400120b0 /* X10_10 */
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x400120b0 /* X10_11 */
+			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03	0x400120b0 /* X10_12 */
+			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0x400120b0 /* PSOC_GPIO_1 */
+			MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05	0x400120b0 /* PSOC_GPIO_2 */
+			MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06	0x400120b0 /* PSOC_GPIO_3 */
+			MX6UL_PAD_CSI_MCLK__GPIO4_IO17		0x120b0    /* MAVEO_BOX_HW0 */
+			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x120b0    /* MAVEO_BOX_HW1 */
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x120b0    /* MAVEO_BOX_HW2 */
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x120b0    /* MAVEO_BOX_VAR0 */
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x120b0    /* MAVEO_BOX_VAR1 */
+			MX6UL_PAD_LCD_CLK__GPIO3_IO00		0x120b0    /* DHCOR_HW0 */
+			MX6UL_PAD_LCD_ENABLE__GPIO3_IO01	0x120b0    /* DHCOR_HW1 */
+			MX6UL_PAD_LCD_DATA00__GPIO3_IO05	0x120b0
+			MX6UL_PAD_LCD_DATA01__GPIO3_IO06	0x120b0
+			MX6UL_PAD_LCD_DATA02__GPIO3_IO07	0x120b0
+			MX6UL_PAD_LCD_DATA03__GPIO3_IO08	0x120b0
+			MX6UL_PAD_LCD_DATA04__GPIO3_IO09	0x120b0
+			MX6UL_PAD_LCD_DATA05__GPIO3_IO10	0x120b0
+			MX6UL_PAD_LCD_DATA06__GPIO3_IO11	0x120b0
+			MX6UL_PAD_LCD_DATA07__GPIO3_IO12	0x120b0
+			MX6UL_PAD_LCD_DATA08__GPIO3_IO13	0x120b0
+			MX6UL_PAD_LCD_DATA09__GPIO3_IO14	0x120b0
+			MX6UL_PAD_LCD_DATA10__GPIO3_IO15	0x120b0
+			MX6UL_PAD_LCD_DATA11__GPIO3_IO16	0x120b0
+			MX6UL_PAD_LCD_DATA12__GPIO3_IO17	0x120b0
+			MX6UL_PAD_LCD_DATA13__GPIO3_IO18	0x120b0
+			MX6UL_PAD_LCD_DATA14__GPIO3_IO19	0x120b0
+			MX6UL_PAD_LCD_DATA15__GPIO3_IO20	0x120b0
+			MX6UL_PAD_LCD_DATA16__GPIO3_IO21	0x120b0
+			MX6UL_PAD_LCD_DATA17__GPIO3_IO22	0x120b0
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x120b0
+		>;
+	};
+
+	pinctrl_bt_gpio: bt-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x400120b0 /* BT_REG_ON */
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4-grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO	0x100b1
+			MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI	0x100b1
+			MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK	0x100b1
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0 /* SS0 */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31	0x4001b8b0
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_READY_B__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x120b0 /* USB_OTG1_PWR */
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x120b0 /* USB_OTG2_PWR */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B	0x17059 /* SD2 Reset */
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl-0 = <&pinctrl_snvs_hog_maveo_box>;
+	pinctrl-names = "default";
+
+	pinctrl_snvs_hog_maveo_box: snvs-hog-maveo-box-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x400120b0 /* PSOC_SWD_IO */
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x400120b0 /* PSOC_SWD_CLK */
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x400120b0 /* PSOC_RESET */
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x400120b0 /* PSOC_PWR_FAIL_OUT */
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x400120b0 /* NFC_ENABLE */
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x400120b0 /* NFC_IRQ */
+			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x120b0    /* DHCOR_BOOT_M0 */
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x120b0    /* DHCOR_BOOT_M1 */
+		>;
+	};
+
+	pinctrl_snvs_wifi_gpio: snvs-wifi-gpio-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x400120b0 /* WL_REG_ON */
+		>;
+	};
+
+	pinctrl_snvs_zigbee_gpio: snvs-zigbee-gpio-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x400120b0 /* ZIGBEE_PROG */
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x400120b0 /* ZIGBEE_RESET */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi
new file mode 100644
index 000000000000..75486e1b0c15
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ */
+
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/regulator/dlg,da9063-regulator.h>
+#include "imx6ull.dtsi"
+
+/ {
+	aliases {
+		/delete-property/ mmc0;
+		/delete-property/ mmc1;
+	};
+
+	memory@80000000 {
+		/* Appropriate memory size will be filled by U-Boot */
+		reg = <0x80000000 0>;
+		device_type = "memory";
+	};
+};
+
+&cpu0 {
+	/*
+	 * Due to the design as a solderable SOM, there are no capacitors
+	 * below the SoC, therefore higher voltages are required.
+	 * Due to CPU lifetime consideration of the SoC manufacturer and
+	 * the preferred area of operation in the industrial related
+	 * environment, set the maximum frequency for each DHCOM i.MX6ULL
+	 * to 792MHz, as with the industrial type.
+	 */
+	clock-frequency = <792000000>;
+	operating-points = <
+		/* kHz	uV */
+		792000	1250000 /* Voltage increased */
+		528000	1175000
+		396000	1025000
+		198000	950000
+	>;
+	fsl,soc-operating-points = <
+		/* KHz	uV */
+		792000	1250000 /* Voltage increased */
+		528000	1175000
+		396000	1175000
+		198000	1175000
+	>;
+};
+
+&gpio1 {
+	pinctrl-0 = <&pinctrl_spi1_switch>;
+	pinctrl-names = "default";
+	/*
+	 * Pin SPI_BOOT_FLASH_EN (GPIO 1.9) is a switch for either using the
+	 * DHCOM SPI1 interface or accessing the SPI bootflash. Both using
+	 * ecspi1, but muxed to different pins. The DHCOM SPI1 interface uses
+	 * the pins PAD_LCD_DATA21..23 and the SPI bootflash uses the pins
+	 * PAD_CSI_DATA04..07. If the SPI bootflash is enabled the pins for
+	 * DHCOM GPIOs N/O/P/Q/R/S/T/U aren't usable anymore, because they
+	 * are used for the bus interface to the SPI bootflash. The GPIOs are
+	 * disconnected by a buffer which is also controlled via the pin
+	 * SPI_BOOT_FLASH_EN. Therefore the access to the bootflash is a
+	 * special case and is disabled by setting GPIO 1.9 to high.
+	 */
+	spi1-switch-hog {
+		gpio-hog;
+		gpios = <9 0>;
+		output-high;
+		line-name = "spi1-switch";
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@58 {
+		compatible = "dlg,da9061";
+		reg = <0x58>;
+
+		onkey {
+			compatible = "dlg,da9061-onkey", "dlg,da9062-onkey";
+			status = "disabled";
+		};
+
+		regulators {
+			vdd_soc_in_1v4: buck1 {
+				regulator-allowed-modes = <DA9063_BUCK_MODE_SLEEP>; /* PFM */
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SLEEP>;
+				regulator-max-microvolt = <1400000>;
+				regulator-min-microvolt = <1400000>;
+				regulator-name = "vdd_soc_in_1v4";
+			};
+
+			vcc_3v3: buck2 {
+				regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_3v3";
+			};
+
+			/*
+			 * The current DRR3 memory can be supplied with a
+			 * voltage of either 1.35V or 1.5V. For reasons of
+			 * backward compatibility to only 1.5V DDR3 memory,
+			 * the voltage is set to 1.5V.
+			 */
+			vcc_ddr_1v35: buck3 {
+				regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-max-microvolt = <1500000>;
+				regulator-min-microvolt = <1500000>;
+				regulator-name = "vcc_ddr_1v35";
+			};
+
+			vcc_2v5: ldo1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2500000>;
+				regulator-min-microvolt = <2500000>;
+				regulator-name = "vcc_2v5";
+			};
+
+			vdd_snvs_in_3v3: ldo2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vdd_snvs_in_3v3";
+			};
+
+			vcc_1v8: ldo3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+			};
+
+			vcc_1v2: ldo4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1200000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-name = "vcc_1v2";
+			};
+		};
+
+		thermal {
+			compatible = "dlg,da9061-thermal", "dlg,da9062-thermal";
+			status = "disabled";
+		};
+
+		watchdog {
+			compatible = "dlg,da9061-watchdog", "dlg,da9062-watchdog";
+			status = "disabled";
+		};
+	};
+};
+
+&ocotp {
+	/* Don't get write access by default */
+	read-only;
+};
+
+&reg_arm {
+	vin-supply = <&vdd_soc_in_1v4>;
+};
+
+&reg_soc {
+	vin-supply = <&vdd_soc_in_1v4>;
+};
+
+/* BT on LGA (BT_REG_ON is connected to LGA pin E1) */
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	/*
+	 * Actually, the maximum speed of the chip is 4MBdps, but there are
+	 * limitations that prevent this speed. It hasn't yet been figured out
+	 * what the reason for this is. Currently, the maximum speed of 3MBdps
+	 * can be used without any problems. If the limitation can be overcome,
+	 * the speed can be increased accordingly.
+	 */
+	bluetooth: bluetooth {
+		compatible = "brcm,bcm43430a1-bt"; /* muRata 1DX */
+		max-speed = <3000000>;
+		vbat-supply = <&vcc_3v3>;
+		vddio-supply = <&vcc_3v3>;
+	};
+};
+
+/* WiFi on LGA (WL_REG_ON is connected to LGA pin E3) */
+&usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	pinctrl-0 = <&pinctrl_usdhc1_wifi>;
+	pinctrl-names = "default";
+	wakeup-source;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac"; /* muRata 1DX */
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x4001b8b0
+		>;
+	};
+
+	pinctrl_spi1_switch: spi1-switch-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x120b0 /* SPI_BOOT_FLASH_EN */
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1_wifi: usdhc1-wifi-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x1b0b0
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10010
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x1b0b0
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x1b0b0
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x1b0b0
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts
new file mode 100644
index 000000000000..279d46c22cd7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2025 Engicam srl
+ */
+
+/dts-v1/;
+
+#include "imx6ull-engicam-microgea.dtsi"
+
+/ {
+	compatible = "engicam,microgea-imx6ull-bmm",
+		     "engicam,microgea-imx6ull", "fsl,imx6ull";
+	model = "Engicam MicroGEA i.MX6ULL BMM Board";
+
+	backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <85>;
+		pwms = <&pwm8 0 100000 0>;
+	};
+
+	buzzer {
+		compatible = "pwm-beeper";
+		pwms = <&pwm4 0 1000000 0>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2>;
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_ext_pwr: regulator-ext-pwr {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_ext_pwr>;
+		regulator-name = "ext-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6ull-microgea-bmm-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	codec: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mclk>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6UL_CLK_CKO>;
+		assigned-clocks = <&clks IMX6UL_CLK_CKO2_SEL>,
+				  <&clks IMX6UL_CLK_CKO2_PODF>,
+				  <&clks IMX6UL_CLK_CKO2>,
+				  <&clks IMX6UL_CLK_CKO>;
+		assigned-clock-parents = <&clks IMX6UL_CLK_OSC>,
+					 <&clks IMX6UL_CLK_CKO2_SEL>,
+					 <&clks IMX6UL_CLK_CKO2_PODF>,
+					 <&clks IMX6UL_CLK_CKO2>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	measure-delay-time = <0x9ffff>;
+	pre-charge-time = <0xfff>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+/* MicroSD */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_3v3>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can: can-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL		0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_mclk: mclkgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TMS__CCM_CLKO1		0x13009
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__PWM4_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT		0x11008
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x000b0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x000b0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x000b0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x000b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl_reg_usb1: regusb1grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17059
+		>;
+	};
+
+	pinctrl_reg_usb2: regusb2grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+
+	pinctrl_reg_ext_pwr: reg-ext-pwrgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-gtw.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-gtw.dts
new file mode 100644
index 000000000000..d500f8839102
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-gtw.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2025 Engicam srl
+ */
+
+/dts-v1/;
+
+#include "imx6ull-engicam-microgea.dtsi"
+
+/ {
+	compatible = "engicam,microgea-imx6ull-gtw",
+		     "engicam,microgea-imx6ull", "fsl,imx6ull";
+	model = "Engicam MicroGEA i.MX6ULL GTW Board";
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		user-button {
+			label = "User button";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>, <&pinctrl_pwrled>;
+
+		led-0 {
+			gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usb_hub: usb-hub {
+		compatible = "smsc,usb3503a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_hub>;
+		reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* MicroSD */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&reg_3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x0b0b0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x130b0
+			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x130b0
+			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x130b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl_pwrled: ledsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x130b0
+		>;
+	};
+
+	pinctrl_usb_hub: usb_hubgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts
new file mode 100644
index 000000000000..107b00b9a939
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2025 Engicam srl
+ */
+
+/dts-v1/;
+
+#include "imx6ull-engicam-microgea.dtsi"
+
+/ {
+	compatible = "engicam,microgea-imx6ull-rmm",
+		     "engicam,microgea-imx6ull", "fsl,imx6ull";
+	model = "Engicam MicroGEA i.MX6ULL BMM Board";
+
+	backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <85>;
+		pwms = <&pwm8 0 100000 0>;
+	};
+
+	buzzer {
+		compatible = "pwm-beeper";
+		pwms = <&pwm4 0 1000000 0>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2>;
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_ext_pwr: regulator-ext-pwr {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_ext_pwr>;
+		regulator-name = "ext-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6ull-microgea-rmm-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			status = "okay";
+		};
+
+		led-1 {
+			gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			status = "okay";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen: touchscreen@38 {
+		compatible = "edt,edt-ft5306";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+		report-rate-hz = <6>;
+		/* settings valid only for Hycon touchscreen */
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	codec: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mclk>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6UL_CLK_CKO>;
+		assigned-clocks = <&clks IMX6UL_CLK_CKO2_SEL>,
+				  <&clks IMX6UL_CLK_CKO2_PODF>,
+				  <&clks IMX6UL_CLK_CKO2>,
+				  <&clks IMX6UL_CLK_CKO>;
+		assigned-clock-parents = <&clks IMX6UL_CLK_OSC>,
+					 <&clks IMX6UL_CLK_CKO2_SEL>,
+					 <&clks IMX6UL_CLK_CKO2_PODF>,
+					 <&clks IMX6UL_CLK_CKO2>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb1_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb2_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+/* MicroSD */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_3v3>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can: can-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL		0x4001b8b0
+			MX6UL_PAD_GPIO1_IO01__I2C2_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x130b0
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x130b0
+		>;
+	};
+
+	pinctrl_mclk: mclkgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TMS__CCM_CLKO1		0x13009
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__PWM4_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
+		>;
+	};
+
+	pinctrl_touchscreen: touchgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14	0x17059
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x17059
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl_reg_usb1: regusb1grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17059
+		>;
+	};
+
+	pinctrl_reg_usb2: regusb2grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+
+	pinctrl_reg_ext_pwr: reg-ext-pwrgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi
new file mode 100644
index 000000000000..43518bf07602
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2025 Engicam srl
+ */
+
+/dts-v1/;
+
+ #include "imx6ull.dtsi"
+
+/ {
+	compatible = "engicam,microgea-imx6ull", "fsl,imx6ull";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_phy_reset>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <4000>;
+			reset-deassert-us = <4000>;
+		};
+	};
+};
+
+/* NAND */
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-ecc-mode = "hw";
+	nand-ecc-strength = <0>;
+	nand-ecc-step-size = <0>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b009
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0xb000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0xb0b1
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl_phy_reset: phy-resetgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-jozacp.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-jozacp.dts
index a152eeb78e88..a152eeb78e88 100644
--- a/arch/arm/boot/dts/imx6ull-jozacp.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-jozacp.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-kontron-bl.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-kontron-bl.dts
new file mode 100644
index 000000000000..fa016465cdbc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-kontron-bl.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2019 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx6ull-kontron-sl.dtsi"
+#include "imx6ul-kontron-bl-common.dtsi"
+
+/ {
+	model = "Kontron BL i.MX6ULL (N641X S)";
+	compatible = "kontron,bl-imx6ull", "kontron,sl-imx6ull", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-kontron-sl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-kontron-sl.dtsi
new file mode 100644
index 000000000000..93f10eb3494f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-kontron-sl.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-kontron-sl-common.dtsi"
+
+/ {
+	model = "Kontron SL i.MX6ULL (N641X SOM)";
+	compatible = "kontron,sl-imx6ull", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx-eval.dts
index 79cc45728cd2..79cc45728cd2 100644
--- a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx-eval.dts
diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi
index d03694feaf5c..83b9de17cee2 100644
--- a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi
@@ -169,7 +169,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
@@ -180,7 +180,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
@@ -206,7 +206,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
 			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
@@ -221,7 +221,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
 			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
diff --git a/arch/arm/boot/dts/imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-opos6ul.dtsi
index 155f941f2811..155f941f2811 100644
--- a/arch/arm/boot/dts/imx6ull-opos6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-opos6ul.dtsi
diff --git a/arch/arm/boot/dts/imx6ull-opos6uldev.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-opos6uldev.dts
index 198fdb72641b..198fdb72641b 100644
--- a/arch/arm/boot/dts/imx6ull-opos6uldev.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-opos6uldev.dts
diff --git a/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-phycore-som.dtsi
index 56cd16e5a77f..56cd16e5a77f 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-phycore-som.dtsi
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-ff-rdk-emmc.dts
index 8e2a4c5d7765..8e2a4c5d7765 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-ff-rdk-emmc.dts
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-ff-rdk-nand.dts
index 1d7362b5ac91..1d7362b5ac91 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-ff-rdk-nand.dts
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-lc-rdk-nand.dts
index 4bcbae024d8d..4bcbae024d8d 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-lc-rdk-nand.dts
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-av-02.dtsi
index 06bb7f327780..06bb7f327780 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-av-02.dtsi
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-eval-01.dtsi
index ff08d95a1aa2..ff08d95a1aa2 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-eval-01.dtsi
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-wlbt-05.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-wlbt-05.dtsi
index df25814a3371..df25814a3371 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-wlbt-05.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-wlbt-05.dtsi
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin.dtsi
index e287a0453b5f..e287a0453b5f 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin.dtsi
diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri-emmc.dts
index 14adb87da911..1610f3892d9e 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri-emmc.dts
@@ -9,8 +9,8 @@
 
 / {
 	model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
-	compatible = "phytec,imx6ull-phygate-tauri",
-		     "phytec,imx6ull-phygate-tauri-emmc",
+	compatible = "phytec,imx6ull-phygate-tauri-emmc",
+		     "phytec,imx6ull-phygate-tauri",
 		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
 };
 
diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri-nand.dts
index ae396ac63443..92e7d38d5637 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri-nand.dts
@@ -9,8 +9,8 @@
 
 / {
 	model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
-	compatible = "phytec,imx6ull-phygate-tauri",
-		     "phytec,imx6ull-phygate-tauri-nand",
+	compatible = "phytec,imx6ull-phygate-tauri-nand",
+		     "phytec,imx6ull-phygate-tauri",
 		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
 };
 
diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
index 5464a52a1f94..7ee25b141627 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
@@ -9,18 +9,13 @@
 #include "imx6ull-phytec-phycore-som.dtsi"
 
 / {
-
-	model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
-	compatible = "phytec,imx6ull-phygate-tauri",
-		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
-
 	aliases {
 		rtc0 = &i2c_rtc;
 		rtc1 = &snvs_rtc;
 	};
 
 	gpio_keys: gpio-keys {
-		compatible = "gpio-key";
+		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
@@ -84,13 +79,13 @@
 		user-led1 {
 			label = "yellow";
 			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "off";
+			linux,default-trigger = "none";
 		};
 
 		user-led2 {
 			label = "red";
 			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "off";
+			linux,default-trigger = "none";
 		};
 	};
 };
@@ -121,7 +116,7 @@
 	tpm_tis: tpm@1 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_tpm>;
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <1>;
 		spi-max-frequency = <20000000>;
 		interrupt-parent = <&gpio5>;
@@ -260,7 +255,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
 	rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
-	rs485-rts-active-high;
 	linux,rs485-enabled-at-boot-time;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h b/arch/arm/boot/dts/nxp/imx/imx6ull-pinfunc-snvs.h
index 54cfe72295aa..54cfe72295aa 100644
--- a/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-pinfunc-snvs.h
diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6ull-pinfunc.h
index 7328d4ef8559..7328d4ef8559 100644
--- a/arch/arm/boot/dts/imx6ull-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-pinfunc.h
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts
new file mode 100644
index 000000000000..cfcd8783c31d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-seeed-npi.dtsi"
+#include "imx6ull-seeed-npi-dev-board.dtsi"
+
+/ {
+	model = "Seeed NPi iMX6ULL Dev Board with NAND";
+	compatible = "seeed,imx6ull-seeed-npi-emmc", "seeed,imx6ull-seeed-npi", "fsl,imx6ull";
+};
+
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts
new file mode 100644
index 000000000000..87c9434b09c5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-seeed-npi.dtsi"
+#include "imx6ull-seeed-npi-dev-board.dtsi"
+
+/ {
+	model = "Seeed NPi iMX6ULL Dev Board with NAND";
+	compatible = "seeed,imx6ull-seeed-npi-nand", "seeed,imx6ull-seeed-npi", "fsl,imx6ull";
+};
+
+&gpmi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi
new file mode 100644
index 000000000000..28fddbcdc55e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_buttons: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_button>;
+
+		button-0 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			label = "SW2";
+			linux,code = <KEY_A>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-blue {
+			gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+			label = "LED_B";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		led-green {
+			gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+			label = "LED_G";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		led-red {
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			label = "LED_R";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		led-user {
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+			label = "User";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
+
+	reg_5v_sys: regulator-5v-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_5v_sys>;
+	};
+
+	reg_3v3_in: regulator-3v3-in {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_IN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_5v_sys>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_3v3_in>;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vmmc>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_3v3>;
+	};
+};
+
+&csi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_csi1>;
+	status = "disabled"; /* LED Blue & Green shared */
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&lcdif {
+	pinctrl-0 = <&pinctrl_lcdif>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&reg_dcdc_3v3 {
+	vin-supply = <&reg_3v3_in>;
+};
+
+&sai2 {
+	assigned-clock-rates = <320000000>;
+	assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
+	pinctrl-0 = <&pinctrl_sai2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_usdhc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_usdhc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_usdhc1_cd>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_button: buttongrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x0b0b0
+		>;
+	};
+
+	pinctrl_csi1: csi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK	0x1b088
+			MX6UL_PAD_CSI_VSYNC__CSI_VSYNC		0x1b088
+			MX6UL_PAD_CSI_HSYNC__CSI_HSYNC		0x1b088
+			MX6UL_PAD_CSI_DATA00__CSI_DATA02	0x1b088
+			MX6UL_PAD_CSI_DATA01__CSI_DATA03	0x1b088
+			MX6UL_PAD_CSI_DATA02__CSI_DATA04	0x1b088
+			MX6UL_PAD_CSI_DATA03__CSI_DATA05	0x1b088
+			MX6UL_PAD_CSI_DATA04__CSI_DATA06	0x1b088
+			MX6UL_PAD_CSI_DATA05__CSI_DATA07	0x1b088
+			MX6UL_PAD_CSI_DATA06__CSI_DATA08	0x1b088
+			MX6UL_PAD_CSI_DATA07__CSI_DATA09	0x1b088
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b031
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC         0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO        0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN      0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER      0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN      0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2  0x4001b031
+		>;
+	};
+
+	pinctrl_gpio_leds: ledgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x0b0b0
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x0b0b0
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x0b0b0
+		>;
+	};
+
+	pinctrl_lcdif: lcdif-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			MX6UL_PAD_LCD_RESET__LCDIF_RESET	0x79
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x79
+		>;
+	};
+
+	pinctrl_reg_vmmc: usdhc1regvmmc-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x17059
+		>;
+	};
+
+	pinctrl_sai2: sai2-grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc1_cd: usdhc1cd-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi
new file mode 100644
index 000000000000..278152875f8e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Seeed NPi-iMX6ULL Dev Board";
+	compatible = "seeed,imx6ull-seeed-npi", "fsl,imx6ull";
+
+	reg_dcdc_3v3: regulator-dcdc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "DCDC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_dram_1v35: regulator-dram-1v35 {
+		compatible = "regulator-fixed";
+		regulator-name = "DRAM_1V35";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&reg_dcdc_3v3>;
+	};
+
+	reg_vdd_arm_soc_in: regulator-vdd-arm-soc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_ARM_SOC_IN";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&reg_dcdc_3v3>;
+	};
+
+	reg_dcdc_1v8: regulator-dcdc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "DCDC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&reg_dcdc_3v3>;
+	};
+
+	reg_sd1_vqmmc: regulator-sd1-vqmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "NVCC_SD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vqmmc>;
+		regulator-always-on;
+		vin-supply = <&reg_dcdc_1v8>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "disabled";
+};
+
+&usdhc1 {
+	vqmmc-supply = <&reg_sd1_vqmmc>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__RAWNAND_DQS		0x0b0b1
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
+			MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B	0x0b0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0x0b0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_reg_vqmmc: usdhc1regvqmmcgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170b9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170b9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170b9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi
new file mode 100644
index 000000000000..5248a058230c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi
@@ -0,0 +1,853 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx6ull.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &usdhc2; /* eMMC */
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&pinctrl_emmc_rst>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_dcdc_3v3: regulator-dcdc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "dcdc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "ldo-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_status_leds>;
+
+		led-1 {
+			function = LED_FUNCTION_BOOT;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_PROGRAMMING;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_motor
+		     &pinctrl_adc_cp
+		     &pinctrl_adc_pp>;
+	vref-supply = <&vgen1_reg>;
+	status = "okay";
+};
+
+&cpu0 {
+	clock-frequency = <792000000>;
+};
+
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	num-cs = <3>;
+	cs-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH
+		    &gpio3 2  GPIO_ACTIVE_HIGH
+		    &gpio3 4  GPIO_ACTIVE_HIGH>;
+};
+
+&ecspi4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	num-cs = <1>;
+	cs-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1
+		     &pinctrl_enet1_phy_rst
+		     &pinctrl_enet_mdio>;
+	phy-supply = <&reg_dcdc_3v3>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-handle = <&ethphy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet1_phy_int>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+			interrupts-extended = <&gpio2 7 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+			max-speed = <100>;
+			smsc,disable-energy-detect;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "",				/* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 5 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 10 */
+			  "",
+			  "",
+			  "CP_INVERT",
+			  "",
+			  "",				/* 15 */
+			  "",
+			  "",
+			  "",
+			  "MOTOR_1_FAULT_N",
+			  "",				/* 20 */
+			  "",
+			  "ROTARY_SWITCH_1_2_N",
+			  "ROTARY_SWITCH_1_4_N",
+			  "ROTARY_SWITCH_1_8_N",
+			  "MOTOR_2_FAULT_N";		/* 25 */
+};
+
+&gpio3 {
+	gpio-line-names = "",				/* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 5 */
+			  "EXT_GPIO",
+			  "MOTOR_1_DRIVER_IN1_N",
+			  "MOTOR_1_DRIVER_IN2",
+			  "MOTOR_2_DRIVER_IN1",
+			  "STM32_BOOT0",		/* 10 */
+			  "STM32_RST_N",
+			  "RELAY_1_ENABLE",
+			  "RELAY_2_ENABLE",
+			  "",
+			  "",				/* 15 */
+			  "QCA700X_MAINS_BOOTLOADER_N",
+			  "QCA700X_CP_RST_N",
+			  "QCA700X_CP_BOOTLOADER_N",
+			  "",
+			  "DIGITAL_OUT_1",		/* 20 */
+			  "DIGITAL_OUT_2",
+			  "DIGITAL_OUT_3",
+			  "DIGITAL_OUT_4",
+			  "DIGITAL_OUT_5",
+			  "DIGITAL_OUT_6",		/* 25 */
+			  "ROTARY_SWITCH_2_8_N",
+			  "ROTARY_SWITCH_2_4_N",
+			  "ROTARY_SWITCH_2_2_N";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pmic>;
+
+	gpio-line-names = "",				/* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 5 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 10 */
+			  "",
+			  "",
+			  "BOARD_VARIANT_1",
+			  "BOARD_VARIANT_2",
+			  "BOARD_VARIANT_0",		/* 15 */
+			  "BOARD_VARIANT_3",
+			  "",
+			  "ROTARY_SWITCH_2_1_N",
+			  "",
+			  "DIGITAL_IN_5",		/* 20 */
+			  "",
+			  "",
+			  "DIGITAL_IN_6",
+			  "",
+			  "DIGITAL_IN_1",		/* 25 */
+			  "DIGITAL_IN_2",
+			  "DIGITAL_IN_4",
+			  "DIGITAL_IN_3";
+
+	pmic-int-hog {
+		gpio-hog;
+		gpios = <19 0>;
+		input;
+	};
+};
+
+&gpio5 {
+	gpio-line-names = "ROTARY_SWITCH_1_1_N",	/* 0 */
+			  "",
+			  "RELAY_2_SENSE",
+			  "RELAY_1_SENSE",
+			  "",
+			  "",				/* 5 */
+			  "",
+			  "QCA700X_MAINS_RST_N",
+			  "MOTOR_2_DRIVER_IN2",
+			  "",
+			  "CP_POSITIVE_PEAK_RST",	/* 10 */
+			  "CP_NEGATIVE_PEAK_RST";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pfuze3001: pmic@8 {
+		compatible = "fsl,pfuze3001";
+		reg = <0x08>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-name = "SW1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-name = "SW2";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-name = "SW3";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-name = "VSNVS";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-name = "VLDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-name = "VLDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-name = "VCCSD";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-name = "V33";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-name = "VLDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-name = "VLDO4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	onewire@18 {
+		compatible = "maxim,ds2484";
+		reg = <0x18>;
+	};
+
+	accelerometer@19 {
+		compatible = "st,iis328dq", "st,h3lis331dl-accel";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accelerometer_int1_snvs>;
+		vdd-supply = <&reg_dcdc_3v3>;
+		vddio-supply = <&reg_dcdc_3v3>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_board_var
+		     &pinctrl_digital_input
+		     &pinctrl_digital_output
+		     &pinctrl_gpio_motor
+		     &pinctrl_hog_pins
+		     &pinctrl_rotary_switch1
+		     &pinctrl_rotary_switch2>;
+
+	pinctrl_adc_cp: adc-cpgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02            0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03            0xb0
+		>;
+	};
+
+	pinctrl_adc_motor: adc-motorgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00            0xb0
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01            0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04            0xb0
+		>;
+	};
+
+	pinctrl_adc_pp: adc-ppgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05            0xb0
+		>;
+	};
+
+	pinctrl_board_var: board-vargrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__GPIO4_IO15              0xb0
+			MX6UL_PAD_NAND_CE0_B__GPIO4_IO13            0xb0
+			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14            0xb0
+			MX6UL_PAD_NAND_DQS__GPIO4_IO16              0xb0
+		>;
+	};
+
+	pinctrl_digital_input: digital-inputgrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25            0xb0
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26            0xb0
+			MX6UL_PAD_CSI_DATA07__GPIO4_IO28            0xb0
+			MX6UL_PAD_CSI_DATA06__GPIO4_IO27            0xb0
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20             0xb0
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23            0xb0
+		>;
+	};
+
+	pinctrl_digital_output: digital-outputgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA15__GPIO3_IO20            0x400000b0
+			MX6UL_PAD_LCD_DATA16__GPIO3_IO21            0x400000b0
+			MX6UL_PAD_LCD_DATA17__GPIO3_IO22            0x400000b0
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23            0x400000b0
+			MX6UL_PAD_LCD_DATA19__GPIO3_IO24            0x400000b0
+			MX6UL_PAD_LCD_DATA20__GPIO3_IO25            0x400000b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29         0x10b0
+			MX6UL_PAD_LCD_HSYNC__GPIO3_IO02             0xb0
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04             0xb0
+			MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK        0x10b0
+			MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO        0x10b0
+			MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI        0x10b0
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15           0x10b0
+			MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK       0x10b0
+			MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO         0x10b0
+			MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI          0x10b0
+		>;
+	};
+
+	pinctrl_emmc_rst: emmc-rstgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10              0x400010b0
+		>;
+	};
+
+	pinctrl_enet_mdio: enet-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO            0x10b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC             0x10b0
+		>;
+	};
+
+	pinctrl_enet1_phy_int: enet1-phy-intgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07           0x10b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00     0x100b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01     0x100b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN          0x100b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1      0x400000b1
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00     0xb0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01     0xb0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN          0xb0
+		>;
+	};
+
+	pinctrl_ext_uart: ext-uartgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX      0xb0
+			MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX         0xb0
+		>;
+	};
+
+	pinctrl_fan_enable: fan-enablegrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__GPIO3_IO05            0x400000b0
+		>;
+	};
+
+	pinctrl_gpio_motor: gpio-motorgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA02__GPIO3_IO07            0x400000b0
+			MX6UL_PAD_LCD_DATA03__GPIO3_IO08            0x400000b0
+			MX6UL_PAD_LCD_DATA04__GPIO3_IO09            0x400000b0
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19           0xb0
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25         0xb0
+		>;
+	};
+
+	pinctrl_hog_pins: hog-pinsgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA07__GPIO3_IO12            0x400000b0
+			MX6UL_PAD_LCD_DATA08__GPIO3_IO13            0x400000b0
+			MX6UL_PAD_JTAG_TDI__GPIO1_IO13              0x400070a0
+			MX6UL_PAD_LCD_DATA05__GPIO3_IO10            0x400000b0
+			MX6UL_PAD_LCD_DATA06__GPIO3_IO11            0x400000b0
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA           0x400008b0
+			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL           0x400008b0
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21         0x400008b0
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20         0x400008b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT        0x70b1
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19             0xb0
+		>;
+	};
+
+	pinctrl_pwm_cp: pinctrl-pwm-cpgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TRST_B__PWM8_OUT             0x60a0
+		>;
+	};
+
+	pinctrl_pwm_digital_input_ref: pwm-digital-input-refgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__PWM2_OUT              0xb0
+		>;
+	};
+
+	pinctrl_pwm_fan: pwm-fangrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__PWM7_OUT                0x60a0
+		>;
+	};
+
+	pinctrl_qca700x_cp_btld: qca700x-cp-btldgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA13__GPIO3_IO18            0x400000b0
+		>;
+	};
+
+	pinctrl_qca700x_cp_int: qca700x-cp-intgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_DATA1__GPIO2_IO19             0x10b0
+		>;
+	};
+
+	pinctrl_qca700x_cp_rst: qca700x-cp-rstgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA12__GPIO3_IO17            0x400000b0
+		>;
+	};
+
+	pinctrl_qca700x_mains_btld: qca700x-mains-btldgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA11__GPIO3_IO16            0x400000b0
+		>;
+	};
+
+	pinctrl_rotary_switch1: rotary-switch1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__GPIO1_IO22           0xb0
+			MX6UL_PAD_UART2_RTS_B__GPIO1_IO23           0xb0
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24         0xb0
+		>;
+	};
+
+	pinctrl_rotary_switch2: rotary-switch2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18            0xb0
+			MX6UL_PAD_LCD_DATA23__GPIO3_IO28            0xb0
+			MX6UL_PAD_LCD_DATA22__GPIO3_IO27            0xb0
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26            0xb0
+		>;
+	};
+
+	pinctrl_rs485_1: rs485-1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18           0xb0
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX       0xb0
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX       0xb0
+		>;
+	};
+
+	pinctrl_rs485_2: rs485-2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24            0x10b0
+			MX6UL_PAD_CSI_DATA01__UART5_DCE_RX          0x10b0
+			MX6UL_PAD_CSI_DATA00__UART5_DCE_TX          0x10b0
+		>;
+	};
+
+	pinctrl_status_leds: status-ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA09__GPIO3_IO14            0xb0
+			MX6UL_PAD_LCD_DATA10__GPIO3_IO15            0xb0
+			MX6UL_PAD_LCD_DATA14__GPIO3_IO19            0xb0
+		>;
+	};
+
+	pinctrl_stm32: stm32grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX      0x10b0
+			MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX      0x10b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__UART4_DTE_RX             0xb0
+			MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX          0xb0
+		>;
+	};
+
+	pinctrl_usb: usbgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USB_OTG1_OC              0x70b0
+			MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID         0x70b0
+		>;
+	};
+
+	pinctrl_usb_pwr: usb-pwrgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USB_OTG1_PWR             0xb0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK             0x7071
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD             0x7071
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0         0x7071
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1         0x7071
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2         0x7071
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3         0x7071
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4         0x7071
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5         0x7071
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6         0x7071
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7         0x7071
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK             0x70b1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD             0x70b1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0         0x70b1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1         0x70b1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2         0x70b1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3         0x70b1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4         0x70b1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5         0x70b1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6         0x70b1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7         0x70b1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK             0x70f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD             0x70f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0         0x70f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1         0x70f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2         0x70f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3         0x70f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4         0x70f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5         0x70f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6         0x70f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7         0x70f1
+		>;
+	};
+
+	pinctrl_wdog2: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B           0x10b0
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default_snvs";
+	pinctrl-0 = <&pinctrl_cp_peak_snvs
+		     &pinctrl_gpio_motor_snvs
+		     &pinctrl_relay_sense_snvs
+		     &pinctrl_rotary_switch1_snvs>;
+
+	pinctrl_accelerometer_int1_snvs: accelerometer-int1-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05         0x130a0
+		>;
+	};
+
+	pinctrl_cp_peak_snvs: cp-peak-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10           0x130a0
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11           0x130a0
+		>;
+	};
+
+	pinctrl_enet1_phy_rst: enet1-phy-rstgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06         0x100a0
+		>;
+	};
+
+	pinctrl_fan_sense_snvs: fan-sense-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01         0x100a0
+		>;
+	};
+
+	pinctrl_gpio_motor_snvs: gpio-motor-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08         0x110a0
+		>;
+	};
+
+	pinctrl_qca700x_mains_int: qca700x-mains-intgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09         0x130a0
+		>;
+	};
+
+	pinctrl_qca700x_mains_rst: qca700x-mains-rstgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07         0x400100a0
+		>;
+	};
+
+	pinctrl_relay_sense_snvs: relay-sense-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03         0x100a0
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02         0x100a0
+		>;
+	};
+
+	pinctrl_rotary_switch1_snvs: rotary-switch1-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00         0x110a0
+		>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_digital_input_ref>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_cp>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rs485_1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rs485_2>;
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_stm32>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ext_uart>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb
+		     &pinctrl_usb_pwr>;
+	dr_mode = "host";
+	power-active-high;
+	over-current-active-low;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-cal-45-dn-ohms = <35>;
+	fsl,tx-cal-45-dp-ohms = <35>;
+};
+
+&usbphy2 {
+	fsl,tx-cal-45-dn-ohms = <35>;
+	fsl,tx-cal-45-dp-ohms = <35>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vmmc-supply = <&sw2_reg>;
+	vqmmc-supply = <&reg_1v8>;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog2>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dts
new file mode 100644
index 000000000000..f9bbd589b66d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon Master";
+	compatible = "chargebyte,imx6ull-tarragon-master", "fsl,imx6ull";
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_sense_snvs>;
+		fan-supply = <&reg_fan>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	reg_fan: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "fan-supply";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_enable>;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&ecspi2 {
+	status = "okay";
+
+	qca700x_cp: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_cp_int
+			     &pinctrl_qca700x_cp_rst
+			     &pinctrl_qca700x_cp_btld>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <12000000>;
+	};
+};
+
+&ecspi4 {
+	status = "okay";
+
+	qca700x_mains: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_mains_int
+			     &pinctrl_qca700x_mains_rst
+			     &pinctrl_qca700x_mains_btld>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <12000000>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_fan>;
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-micro.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-micro.dts
new file mode 100644
index 000000000000..e471c2005bee
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-micro.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon Micro";
+	compatible = "chargebyte,imx6ull-tarragon-micro", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slave.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slave.dts
new file mode 100644
index 000000000000..ef06619d7c86
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slave.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon Slave";
+	compatible = "chargebyte,imx6ull-tarragon-slave", "fsl,imx6ull";
+};
+
+&ecspi2 {
+	status = "okay";
+
+	qca700x_cp: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_cp_int
+			     &pinctrl_qca700x_cp_rst
+			     &pinctrl_qca700x_cp_btld>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <12000000>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slavext.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slavext.dts
new file mode 100644
index 000000000000..83db65bf630f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slavext.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon SlaveXT";
+	compatible = "chargebyte,imx6ull-tarragon-slavext", "fsl,imx6ull";
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_sense_snvs>;
+		fan-supply = <&reg_fan>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	reg_fan: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "fan-supply";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_enable>;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&ecspi2 {
+	status = "okay";
+
+	qca700x_cp: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_cp_int
+			     &pinctrl_qca700x_cp_rst
+			     &pinctrl_qca700x_cp_btld>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <12000000>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_fan>;
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2-mba6ulx.dts
index e593b7036fc7..e593b7036fc7 100644
--- a/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2-mba6ulx.dts
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2.dtsi
index 8541cb3f3b3e..8541cb3f3b3e 100644
--- a/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2.dtsi
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l-mba6ulx.dts
index 33437aae9822..33437aae9822 100644
--- a/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l-mba6ulx.dts
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l.dtsi
index be593d47e3b1..be593d47e3b1 100644
--- a/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l.dtsi
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-uti260b.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-uti260b.dts
new file mode 100644
index 000000000000..e4576d509a5b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-uti260b.dts
@@ -0,0 +1,566 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2022-2024 Sebastian Reichel <sre@kernel.org>
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "UNI-T UTi260B Thermal Camera";
+	compatible = "uni-t,uti260b", "fsl,imx6ull";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	panel_backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		enable-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_backlight_enable>;
+		power-supply = <&reg_vsd>;
+		pwms = <&pwm1 0 50000 0>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		/* generic 26650 battery */
+		device-chemistry = "lithium-ion";
+		charge-full-design-microamp-hours = <5000000>;
+		voltage-max-design-microvolt = <4200000>;
+		voltage-min-design-microvolt = <3300000>;
+	};
+
+	tp5000: charger {
+		compatible = "gpio-charger";
+		charger-type = "usb-sdp";
+		gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_charger_stat1>;
+	};
+
+	fuel-gauge {
+		compatible = "adc-battery";
+		charged-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		io-channel-names = "voltage";
+		io-channels = <&adc1 7>;
+		monitored-battery = <&battery>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_charger_stat2>;
+		power-supplies = <&tp5000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_gpio_keys>;
+		autorepeat;
+
+		up-key {
+			label = "Up";
+			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_UP>;
+		};
+
+		down-key {
+			label = "Down";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_DOWN>;
+		};
+
+		left-key {
+			label = "Left";
+			gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LEFT>;
+		};
+
+		right-key {
+			label = "Right";
+			gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RIGHT>;
+		};
+
+		ok-key {
+			label = "Ok";
+			gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+		};
+
+		return-key {
+			label = "Return";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ESC>;
+		};
+
+		play-key {
+			label = "Media";
+			gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MEDIA>;
+		};
+
+		trigger-key {
+			label = "Trigger";
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_TRIGGER>;
+		};
+
+		power-key {
+			label = "Power";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		light-key {
+			label = "Light";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LIGHTS_TOGGLE>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_led_ctrl>;
+
+		led {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_FLASH;
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_poweroff>;
+	};
+
+	reg_vref: regulator-vref-4v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VREF_4V2";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+	};
+
+	reg_vsd: regulator-vsd {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc1 {
+	#io-channel-cells = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_adc>;
+	vref-supply = <&reg_vref>;
+	status = "okay";
+};
+
+&csi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_csi>;
+	status = "okay";
+
+	port {
+		parallel_from_gc0308: endpoint {
+			remote-endpoint = <&gc0308_to_parallel>;
+		};
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_spi3>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "inanbo,t28cp45tn89-v17";
+		reg = <0>;
+		backlight = <&panel_backlight>;
+		power-supply = <&reg_vsd>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <1000000>;
+		spi-rx-bus-width = <0>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&gpio1 {
+	ir-reset-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_LOW>;
+		line-name = "ir-reset-gpio";
+		output-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_ir_reset>;
+	};
+};
+
+&gpio2 {
+	/* configuring this to output-high results in poweroff */
+	power-en-hog {
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_HIGH>;
+		line-name = "power-en-gpio";
+		output-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_poweroff2>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_i2c1>;
+	status = "okay";
+
+	camera@21 {
+		compatible = "galaxycore,gc0308";
+		reg = <0x21>;
+		clocks = <&clks IMX6UL_CLK_CSI>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_gc0308>;
+		powerdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		vdd28-supply = <&reg_vsd>;
+
+		port {
+			gc0308_to_parallel: endpoint {
+				remote-endpoint = <&parallel_from_gc0308>;
+				bus-width = <8>;
+				data-shift = <2>; /* lines 9:2 are used */
+				hsync-active = <1>; /* active high */
+				vsync-active = <1>; /* active high */
+				data-active = <1>; /* active high */
+				pclk-sample = <1>; /* sample on rising edge */
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_i2c2>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&lcdif {
+	assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_lcd_data>, <&mux_lcd_ctrl>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_pwm>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_uart>;
+	status = "okay";
+};
+
+&usbotg1 {
+	/* USB-C connector */
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	/* thermal sensor */
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc1 {
+	/* MicroSD */
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&mux_sdhc1>, <&mux_sdhc1_cd>;
+	pinctrl-1 = <&mux_sdhc1_100mhz>, <&mux_sdhc1_cd>;
+	pinctrl-2 = <&mux_sdhc1_200mhz>, <&mux_sdhc1_cd>;
+	wakeup-source;
+	vmmc-supply = <&reg_vsd>;
+	status = "okay";
+};
+
+&usdhc2 {
+	/* eMMC */
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_sdhc2>;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_wdog>;
+};
+
+&iomuxc {
+	mux_adc: adcgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__GPIO1_IO07		0xb0
+		>;
+	};
+
+	mux_backlight_enable: blenablegrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09		0x3008
+		>;
+	};
+
+	mux_charger_stat1: charger1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0x3008
+		>;
+	};
+
+	mux_charger_stat2: charger2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0x3008
+		>;
+	};
+
+	mux_csi: csi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK		0x1b088
+			MX6UL_PAD_CSI_VSYNC__CSI_VSYNC			0x1b088
+			MX6UL_PAD_CSI_HSYNC__CSI_HSYNC			0x1b088
+			MX6UL_PAD_CSI_DATA00__CSI_DATA02		0x1b088
+			MX6UL_PAD_CSI_DATA01__CSI_DATA03		0x1b088
+			MX6UL_PAD_CSI_DATA02__CSI_DATA04		0x1b088
+			MX6UL_PAD_CSI_DATA03__CSI_DATA05		0x1b088
+			MX6UL_PAD_CSI_DATA04__CSI_DATA06		0x1b088
+			MX6UL_PAD_CSI_DATA05__CSI_DATA07		0x1b088
+			MX6UL_PAD_CSI_DATA06__CSI_DATA08		0x1b088
+			MX6UL_PAD_CSI_DATA07__CSI_DATA09		0x1b088
+		>;
+	};
+
+	mux_gc0308: gc0308grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__CSI_MCLK			0x1e038
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05		0x1b088
+			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06		0x1b088
+		>;
+	};
+
+	mux_gpio_keys: gpiokeygrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11		0x3008
+			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12		0x3008
+			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13		0x3008
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10		0x3008
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09		0x3008
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15		0x3008
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08		0x3008
+			MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14		0x3008
+			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03		0x3008
+			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01		0x3008
+		>;
+	};
+
+	mux_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	mux_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL		0x4001f8a8
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA		0x4001f8a8
+		>;
+	};
+
+	mux_ir_reset: irresetgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0x3008
+		>;
+	};
+
+	mux_lcd_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK			0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE		0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC		0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC		0x79
+		>;
+	};
+
+	mux_lcd_data: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00		0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01		0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02		0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03		0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04		0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05		0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06		0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07		0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08		0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09		0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10		0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11		0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12		0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13		0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14		0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15		0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16		0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17		0x79
+		>;
+	};
+
+	mux_led_ctrl: ledctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02		0x3008
+		>;
+	};
+
+	mux_poweroff: poweroffgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04		0x3008
+		>;
+	};
+
+	mux_poweroff2: poweroff2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06		0x3008
+		>;
+	};
+
+	mux_pwm: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__PWM1_OUT			0x110b0
+		>;
+	};
+
+	mux_sdhc1: sdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x10071
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x17059
+		>;
+	};
+
+	mux_sdhc1_100mhz: sdhc1-100mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x170b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x170b9
+		>;
+	};
+
+	mux_sdhc1_200mhz: sdhc1-200mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x170f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x170f9
+		>;
+	};
+
+	mux_sdhc1_cd: sdhc1-cd-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19		0x17059
+		>;
+	};
+
+	mux_sdhc2: sdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK			0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD			0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0		0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1		0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2		0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3		0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4		0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5		0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6		0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7		0x17059
+		>;
+	};
+
+	mux_spi3: ecspi3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI		0x100b1
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK		0x100b1
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20		0x3008
+		>;
+	};
+
+	mux_uart: uartgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX		0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX		0x1b0b1
+		>;
+	};
+
+	mux_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY		0x30b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi
index 2bccd45e9fc2..db0c339022ac 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi
@@ -75,7 +75,7 @@
 				clocks = <&clks IMX6UL_CLK_DUMMY>;
 			};
 
-			iomuxc_snvs: iomuxc-snvs@2290000 {
+			iomuxc_snvs: pinctrl@2290000 {
 				compatible = "fsl,imx6ull-iomuxc-snvs";
 				reg = <0x02290000 0x4000>;
 			};
@@ -88,6 +88,8 @@
 				clocks = <&clks IMX6UL_CLK_UART8_IPG>,
 					 <&clks IMX6UL_CLK_UART8_SERIAL>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 45 4 0>, <&sdma 46 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6ulz-14x14-evk.dts
index 483d9732c002..483d9732c002 100644
--- a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ulz-14x14-evk.dts
diff --git a/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
index c92e4e2f6ab9..2d9f495660c9 100644
--- a/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
@@ -33,6 +33,10 @@
 	status = "okay";
 };
 
+&uart2 {
+	status = "okay";
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
@@ -94,7 +98,7 @@
 };
 
 &iomuxc {
-	pinctrl_gpmi_nand: gpmi-nand {
+	pinctrl_gpmi_nand: gpminandgrp {
 		fsl,pins = <
 			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0xb0b1
 			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0xb0b1
diff --git a/arch/arm/boot/dts/imx6ulz.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ulz.dtsi
index 0b5f1a763567..0b5f1a763567 100644
--- a/arch/arm/boot/dts/imx6ulz.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ulz.dtsi
diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-colibri-aster.dtsi
index fa488a6de0d4..01612741f792 100644
--- a/arch/arm/boot/dts/imx7-colibri-aster.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-colibri-aster.dtsi
@@ -70,6 +70,7 @@
 
 /* Colibri USBC */
 &usbotg1 {
+	disable-over-current;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-colibri-eval-v3.dtsi
index 826f13da5b81..326440f2b4f4 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-colibri-eval-v3.dtsi
@@ -101,6 +101,7 @@
 
 /* Colibri USBC */
 &usbotg1 {
+	disable-over-current;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-colibri-iris-v2.dtsi
index 6e199613583c..b687727f956a 100644
--- a/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-colibri-iris-v2.dtsi
@@ -99,6 +99,7 @@
 
 /* Colibri USBC */
 &usbotg1 {
+	disable-over-current;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx7-colibri-iris.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-colibri-iris.dtsi
index 175c5d478d2e..6a9e5ab59691 100644
--- a/arch/arm/boot/dts/imx7-colibri-iris.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-colibri-iris.dtsi
@@ -99,6 +99,7 @@
 
 /* Colibri USBC */
 &usbotg1 {
+	disable-over-current;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi
index a8c31ee65623..8666dcd7fe97 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi
@@ -29,8 +29,7 @@
 
 	extcon_usbc_det: usbc-det {
 		compatible = "linux,extcon-usb-gpio";
-		debounce = <25>;
-		id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+		id-gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usbc_det>;
 	};
@@ -40,7 +39,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 
-		wakeup {
+		key-wakeup {
 			debounce-interval = <10>;
 			gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
 			label = "Wake-Up";
@@ -121,7 +120,7 @@
 		simple-audio-card,bitclock-master = <&dailink_master>;
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,name = "colibri-imx7";
 
 		simple-audio-card,cpu {
 			sound-dai = <&sai1>;
@@ -652,7 +651,7 @@
 	 * NOTE: This pin group conflicts with pin groups pinctrl_pwm2/pinctrl_pwm3.
 	 * Don't use them simultaneously.
 	 */
-	pinctrl_atmel_adapter: atmelconnectorgrp {
+	pinctrl_atmel_adapter: atmeladaptergrp {
 		fsl,pins = <
 			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x74 /* SODIMM 28 / INT */
 			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14 /* SODIMM 30 / RST */
@@ -660,7 +659,7 @@
 	};
 
 	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
-	pinctrl_atmel_connector: atmeladaptergrp {
+	pinctrl_atmel_connector: atmelconnectorgrp {
 		fsl,pins = <
 			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x14 /* SODIMM 106 / RST */
 			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x74 /* SODIMM 107 / INT */
@@ -904,7 +903,7 @@
 		>;
 	};
 
-	pinctrl_lvds_transceiver: lvdstx {
+	pinctrl_lvds_transceiver: lvdstxgrp {
 		fsl,pins = <
 			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2     0x14 /* SODIMM 63 */
 			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3     0x74 /* SODIMM 55 */
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
new file mode 100644
index 000000000000..4d948a9757f9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
@@ -0,0 +1,656 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Include file for TQ-Systems MBa7 carrier board.
+ *
+ * Copyright (C) 2016 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ *
+ * Note: This file does not include nodes for all peripheral devices.
+ * As device driver coverage increases additional nodes can be added.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc1;
+		/delete-property/ mmc2;
+		rtc0 = &ds1339;
+		rtc1 = &snvs_rtc;
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+		gpios = <&pca9555 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		stdout-path = &uart6;
+	};
+
+	gpio_buttons: gpio-keys {
+		compatible = "gpio-keys";
+
+		/*
+		 * NOTE: These buttons are attached to a GPIO-expander.
+		 * Enabling wakeup-source, enables wakeup on all inputs.
+		 * If PE_GPIO[3..6] are used as inputs, they cause a
+		 * wakeup as well.
+		 */
+		button-0 {
+			/* #SWITCH_A */
+			label = "S11";
+			linux,code = <KEY_1>;
+			gpios = <&pca9555 13 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-1 {
+			/* #SWITCH_B */
+			label = "S12";
+			linux,code = <KEY_2>;
+			gpios = <&pca9555 14 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-2 {
+			/* #SWITCH_C */
+			label = "S13";
+			linux,code = <KEY_3>;
+			gpios = <&pca9555 15 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "led1";
+			gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc2 0>, <&adc2 1>, <&adc2 2>, <&adc2 3>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS_USBOTG1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS_USBOTG2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_1v5: regulator-mpcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V5_MPCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pca9555 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_mba_5v>;
+	};
+
+	reg_mpcie_3v3: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3_MPCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca9555 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_mba_3v3>;
+	};
+
+	reg_mba_12v0: regulator-mba-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC12V0_MBA7";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&pca9555 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mba_5v: regulator-mba-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_mba_3v3: regulator-mba-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8_REF";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&sw2_reg>;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_mba_3v3>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		ssi-controller = <&sai1>;
+		audio-codec = <&tlv320aic32x4>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"IN1_L", "Line In Jack",
+			"IN1_R", "Line In Jack",
+			"Line Out Jack", "LOL",
+			"Line Out Jack", "LOR";
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&adc2 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_ss0>;
+	cs-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>, <&gpio4 1 GPIO_ACTIVE_LOW>,
+		   <&gpio4 2 GPIO_ACTIVE_LOW>, <&gpio4 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1_0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1_0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet1_phy>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <500>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+};
+
+&flash0 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uboot@0 {
+			label = "U-Boot";
+			reg = <0x0 0xd0000>;
+		};
+
+		env1@d0000 {
+			label = "ENV1";
+			reg = <0xd0000 0x10000>;
+		};
+
+		env2@e0000 {
+			label = "ENV2";
+			reg = <0xe0000 0x10000>;
+		};
+
+		dtb@f0000 {
+			label = "DTB";
+			reg = <0xf0000 0x10000>;
+		};
+
+		linux@100000 {
+			label = "Linux";
+			reg = <0x100000 0x700000>;
+		};
+
+		rootfs@800000 {
+			label = "RootFS";
+			reg = <0x800000 0x3800000>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&i2c1 {
+	lm75: temperature-sensor@49 {
+		compatible = "national,lm75a";
+		reg = <0x49>;
+		vs-supply = <&reg_mba_3v3>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_recovery>;
+	scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		clock-names = "mclk";
+		ldoin-supply = <&reg_audio_3v3>;
+		iov-supply = <&reg_audio_3v3>;
+	};
+
+	pca9555: gpio-expander@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9555>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_mba_3v3>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_recovery>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_mba7_1>;
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins =
+			<MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO		0x7c>,
+			<MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI		0x74>,
+			<MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK		0x74>,
+			<MX7D_PAD_UART1_RX_DATA__GPIO4_IO0		0x74>,
+			<MX7D_PAD_UART1_TX_DATA__GPIO4_IO1		0x74>,
+			<MX7D_PAD_UART2_RX_DATA__GPIO4_IO2		0x74>;
+	};
+
+	pinctrl_ecspi1_ss0: ecspi1ss0grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19			0x74
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins =
+			<MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO		0x7c>,
+			<MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI		0x74>,
+			<MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK		0x74>,
+			<MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0		0x74>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins =
+			<MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x02>,
+			<MX7D_PAD_GPIO1_IO11__ENET1_MDC				0x00>,
+			<MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71>,
+			<MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x79>;
+	};
+
+	pinctrl_enet1_phy: enet1phygrp {
+		fsl,pins =
+			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
+			<MX7D_PAD_ENET1_COL__GPIO7_IO15				0x40000070>,
+			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
+			<MX7D_PAD_GPIO1_IO09__GPIO1_IO9				0x40000078>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins =
+			<MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x5a>,
+			<MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x52>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins =
+			<MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x5a>,
+			<MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x52>;
+	};
+
+	pinctrl_hog_mba7_1: hogmba71grp {
+		fsl,pins =
+			/* Limitation: WDOG2_B / WDOG2_RESET not usable */
+			<MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13	0x4000007c>,
+			<MX7D_PAD_ENET1_CRS__GPIO7_IO14		0x40000074>,
+			/* #BOOT_EN */
+			<MX7D_PAD_UART2_TX_DATA__GPIO4_IO3	0x40000010>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins =
+			<MX7D_PAD_I2C2_SCL__I2C2_SCL		0x40000078>,
+			<MX7D_PAD_I2C2_SDA__I2C2_SDA		0x40000078>;
+	};
+
+	pinctrl_i2c2_recovery: i2c2recoverygrp {
+		fsl,pins =
+			<MX7D_PAD_I2C2_SCL__GPIO4_IO10		0x40000078>,
+			<MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x40000078>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins =
+			<MX7D_PAD_I2C3_SCL__I2C3_SCL		0x40000078>,
+			<MX7D_PAD_I2C3_SDA__I2C3_SDA		0x40000078>;
+	};
+
+	pinctrl_i2c3_recovery: i2c3recoverygrp {
+		fsl,pins =
+			<MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x40000078>,
+			<MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x40000078>;
+	};
+
+	pinctrl_pca9555: pca95550grp {
+		fsl,pins =
+			<MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x78>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins =
+			<MX7D_PAD_SAI1_MCLK__SAI1_MCLK		0x11>,
+			<MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK	0x1c>,
+			<MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1c>,
+			<MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC	0x1c>,
+
+			<MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1c>,
+			<MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x14>,
+			<MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x14>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins =
+			<MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x7e>,
+			<MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x76>,
+			<MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x76>,
+			<MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x7e>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins =
+			<MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX	0x7e>,
+			<MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX	0x76>,
+			<MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS	0x76>,
+			<MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS	0x7e>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins =
+			<MX7D_PAD_I2C4_SCL__UART5_DCE_RX	0x7e>,
+			<MX7D_PAD_I2C4_SDA__UART5_DCE_TX	0x76>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins =
+			<MX7D_PAD_EPDC_DATA08__UART6_DCE_RX	0x7d>,
+			<MX7D_PAD_EPDC_DATA09__UART6_DCE_TX	0x75>,
+			<MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS	0x75>,
+			<MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS	0x7d>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins =
+			<MX7D_PAD_EPDC_DATA12__UART7_DCE_RX	0x7e>,
+			<MX7D_PAD_EPDC_DATA13__UART7_DCE_TX	0x76>,
+			<MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS	0x76>,
+			/* Limitation: RTS is not connected */
+			<MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS	0x7e>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1_gpiogrp {
+		fsl,pins =
+			/* WP */
+			<MX7D_PAD_SD1_WP__GPIO5_IO1		0x7c>,
+			/* CD */
+			<MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x7c>,
+			/* VSELECT */
+			<MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins =
+			<MX7D_PAD_SD1_CMD__SD1_CMD		0x5e>,
+			<MX7D_PAD_SD1_CLK__SD1_CLK		0x57>,
+			<MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5e>,
+			<MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5e>,
+			<MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5e>,
+			<MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5e>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1_100mhzgrp {
+		fsl,pins =
+			<MX7D_PAD_SD1_CMD__SD1_CMD		0x5a>,
+			<MX7D_PAD_SD1_CLK__SD1_CLK		0x57>,
+			<MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a>,
+			<MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a>,
+			<MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a>,
+			<MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1_200mhzgrp {
+		fsl,pins =
+			<MX7D_PAD_SD1_CMD__SD1_CMD		0x5b>,
+			<MX7D_PAD_SD1_CLK__SD1_CLK		0x57>,
+			<MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b>,
+			<MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b>,
+			<MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b>,
+			<MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins =
+			/* LCD_CONTRAST */
+			<MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT	0x50>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins =
+			<MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x5c>,
+			<MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x59>;
+	};
+
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins =
+			<MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <36864000>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+&usbh {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	over-current-active-low;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_mba_3v3>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
new file mode 100644
index 000000000000..2966a33bc528
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Include file for TQ-Systems TQMa7x boards with full mounted PCB.
+ *
+ * Copyright (C) 2016 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 512 MB - default configuration */
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&gpio2 {
+	/* Configured as pullup by QSPI pin group */
+	qspi-reset-hog {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "qspi-reset";
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery>;
+	scl-gpios = <&gpio4 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pfuze3000: pmic@8 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic1>;
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	/* LM75A temperature sensor, TQMa7x 01xx */
+	lm75a: temperature-sensor@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+		vs-supply = <&vgen4_reg>;
+	};
+
+	/* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
+	se97b: temperature-sensor@1e {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1e>;
+	};
+
+	/* ST M24C64 */
+	m24c64: eeprom@50 {
+		compatible = "atmel,24c64";
+		read-only;
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&vgen4_reg>;
+	};
+
+	at24c02: eeprom@56 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x56>;
+		pagesize = <16>;
+		vcc-supply = <&vgen4_reg>;
+	};
+
+	ds1339: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins =
+			<MX7D_PAD_I2C1_SDA__I2C1_SDA	0x40000078>,
+			<MX7D_PAD_I2C1_SCL__I2C1_SCL	0x40000078>;
+	};
+
+	pinctrl_i2c1_recovery: i2c1recoverygrp {
+		fsl,pins =
+			<MX7D_PAD_I2C1_SDA__GPIO4_IO9	0x40000078>,
+			<MX7D_PAD_I2C1_SCL__GPIO4_IO8	0x40000078>;
+	};
+
+	pinctrl_pmic1: pmic1grp {
+		fsl,pins =
+			<MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x4000005C>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins =
+			<MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0	0x5A>,
+			<MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1	0x5A>,
+			<MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2	0x5A>,
+			<MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3	0x5A>,
+			<MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK	0x11>,
+			<MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B	0x54>,
+			<MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B	0x54>;
+	};
+
+	pinctrl_qspi_reset: qspi_resetgrp {
+		fsl,pins =
+			/* #QSPI_RESET */
+			<MX7D_PAD_EPDC_DATA04__GPIO2_IO4	0x52>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins =
+			<MX7D_PAD_SD3_CMD__SD3_CMD		0x59>,
+			<MX7D_PAD_SD3_CLK__SD3_CLK		0x56>,
+			<MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59>,
+			<MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59>,
+			<MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59>,
+			<MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59>,
+			<MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59>,
+			<MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59>,
+			<MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59>,
+			<MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59>,
+			<MX7D_PAD_SD3_STROBE__SD3_STROBE	0x19>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3_100mhzgrp {
+		fsl,pins =
+			<MX7D_PAD_SD3_CMD__SD3_CMD               0x5a>,
+			<MX7D_PAD_SD3_CLK__SD3_CLK               0x51>,
+			<MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5a>,
+			<MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5a>,
+			<MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5a>,
+			<MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5a>,
+			<MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5a>,
+			<MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5a>,
+			<MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5a>,
+			<MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5a>,
+			<MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1a>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3_200mhzgrp {
+		fsl,pins =
+			<MX7D_PAD_SD3_CMD__SD3_CMD               0x5b>,
+			<MX7D_PAD_SD3_CLK__SD3_CLK               0x51>,
+			<MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5b>,
+			<MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5b>,
+			<MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5b>,
+			<MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5b>,
+			<MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5b>,
+			<MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5b>,
+			<MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5b>,
+			<MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5b>,
+			<MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1b>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins =
+			<MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30>;
+	};
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi &pinctrl_qspi_reset>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <29000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		vcc-supply = <&vgen4_reg>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	vmmc-supply = <&vgen4_reg>;
+	vqmmc-supply = <&sw2_reg>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	/*
+	 * Errata e10574:
+	 * WDOG reset needs to run with WDOG_RESET_B signal enabled.
+	 * X1-51 (WDOG1#) signal needs carrier board handling to reset
+	 * TQMa7 on X1-22 (RESET_IN#).
+	 */
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-cl-som-imx7.dts
index 713483c39c9d..713483c39c9d 100644
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-cl-som-imx7.dts
diff --git a/arch/arm/boot/dts/imx7d-colibri-aster.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-aster.dts
index 90aaeddfb4f6..00ab92e56da4 100644
--- a/arch/arm/boot/dts/imx7d-colibri-aster.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-aster.dts
@@ -36,5 +36,6 @@
 
 /* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-aster.dts
index 3ec9ef6baaa4..212e0685585d 100644
--- a/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-aster.dts
@@ -12,11 +12,11 @@
 	model = "Toradex Colibri iMX7D 1GB (eMMC) on Aster Carrier Board";
 	compatible = "toradex,colibri-imx7d-emmc-aster",
 		     "toradex,colibri-imx7d-emmc",
-		     "toradex,colibri-imx7d",
 		     "fsl,imx7d";
 };
 
 /* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-eval-v3.dts
index 6d505cb02aad..1deece7e7129 100644
--- a/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-eval-v3.dts
@@ -11,11 +11,11 @@
 	model = "Toradex Colibri iMX7D 1GB (eMMC) on Colibri Evaluation Board V3";
 	compatible = "toradex,colibri-imx7d-emmc-eval-v3",
 		     "toradex,colibri-imx7d-emmc",
-		     "toradex,colibri-imx7d",
 		     "fsl,imx7d";
 };
 
 /* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris-v2.dts
index 7347659557f3..22e7863c2e80 100644
--- a/arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris-v2.dts
@@ -11,11 +11,11 @@
 	model = "Toradex Colibri iMX7D 1GB on Iris V2 Carrier Board";
 	compatible = "toradex,colibri-imx7d-emmc-iris-v2",
 		     "toradex,colibri-imx7d-emmc",
-		     "toradex,colibri-imx7d",
 		     "fsl,imx7d";
 };
 
 /* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris.dts
index 5324c92e368d..a3cf8f50e3dc 100644
--- a/arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris.dts
@@ -11,11 +11,11 @@
 	model = "Toradex Colibri iMX7D 1GB on Iris Carrier Board";
 	compatible = "toradex,colibri-imx7d-emmc-iris",
 		     "toradex,colibri-imx7d-emmc",
-		     "toradex,colibri-imx7d",
 		     "fsl,imx7d";
 };
 
 /* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi
index 2fb4d2133a1b..9670f45eab3b 100644
--- a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi
@@ -11,6 +11,10 @@
 		/* Required to properly pass MAC addresses from bootloader. */
 		ethernet0 = &fec1;
 		ethernet1 = &fec2;
+		mmc0 = &usdhc3; /* eMMC */
+		mmc1 = &usdhc1; /* MMC/SD slot */
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
 	};
 
 	memory@80000000 {
@@ -51,6 +55,7 @@
 
 /* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	dr_mode = "host";
 	vbus-supply = <&reg_usbh_vbus>;
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-eval-v3.dts
index c7a8b5aa2408..33d787617db0 100644
--- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-eval-v3.dts
@@ -52,5 +52,6 @@
 
 /* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-iris-v2.dts
index 5762f51d5f0f..afdb1d06c7f6 100644
--- a/arch/arm/boot/dts/imx7d-colibri-iris-v2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-iris-v2.dts
@@ -79,5 +79,6 @@
 
 /* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-iris.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-iris.dts
index 9c63cb9d9a64..531b0b99bd5a 100644
--- a/arch/arm/boot/dts/imx7d-colibri-iris.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-iris.dts
@@ -52,5 +52,6 @@
 
 /* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-colibri.dtsi
index 531a45b176a1..531a45b176a1 100644
--- a/arch/arm/boot/dts/imx7d-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri.dtsi
diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator-mfg.dts
index a6d68165fb1e..a6d68165fb1e 100644
--- a/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator-mfg.dts
diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
index bd6b5285aa8d..9984b343cdf0 100644
--- a/arch/arm/boot/dts/imx7d-flex-concentrator.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
@@ -107,7 +107,6 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
-	num-chipselects = <1>;
 	cs-gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
@@ -122,7 +121,6 @@
 &ecspi4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi4>;
-	num-chipselects = <1>;
 	cs-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
@@ -132,7 +130,7 @@
 	 * TCG specification - Section 6.4.1 Clocking:
 	 * TPM shall support a SPI clock frequency range of 10-24 MHz.
 	 */
-	st33htph: tpm-tis@0 {
+	st33htph: tpm@0 {
 		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <24000000>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts
new file mode 100644
index 000000000000..e3ee16f1aaa9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Source for TQ-Systems TQMa7D board on MBa7 carrier board.
+ *
+ * Copyright (C) 2016 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "imx7d-tqma7.dtsi"
+#include "imx7-mba7.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa7D board on MBa7 carrier board";
+	compatible = "tq,imx7d-mba7", "tq,imx7d-tqma7", "fsl,imx7d";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy2_0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy2_0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet2_phy>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <500>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+};
+
+&gpio2 {
+	pcie-dis-hog {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "pcie-dis";
+	};
+
+	pcie-rst-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "pcie-rst";
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_mba7_1>, <&pinctrl_hog_pcie>;
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins =
+			<MX7D_PAD_SD2_CD_B__ENET2_MDIO			0x02>,
+			<MX7D_PAD_SD2_WP__ENET2_MDC			0x00>,
+			<MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x71>,
+			<MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x71>,
+			<MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x71>,
+			<MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x71>,
+			<MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x71>,
+			<MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x71>,
+			<MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x79>,
+			<MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x79>,
+			<MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x79>,
+			<MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x79>,
+			<MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x79>,
+			<MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL	0x79>;
+	};
+
+	pinctrl_enet2_phy: enet2phygrp {
+		fsl,pins =
+			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
+			<MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x40000070>,
+			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
+			<MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x40000078>;
+	};
+
+	pinctrl_hog_pcie: hogpciegrp {
+		fsl,pins =
+			/* #pcie_rst */
+			<MX7D_PAD_SD2_CLK__GPIO5_IO12			0x70>,
+			/* #pcie_dis */
+			<MX7D_PAD_EPDC_BDR1__GPIO2_IO29			0x70>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins =
+			/* #pcie_wake */
+			<MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30		0x70>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins =
+			<MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC	0x5c>,
+			<MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	/* 1.5V logically from 3.3V */
+	/* probe deferral not supported */
+	/* pcie-bus-supply = <&reg_mpcie_1v5>; */
+	reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-meerkat96.dts b/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts
index dd8003bd1fc0..f0fda15f3020 100644
--- a/arch/arm/boot/dts/imx7d-meerkat96.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts
@@ -212,7 +212,7 @@
 	keep-power-in-suspend;
 	wakeup-source;
 	vmmc-supply = <&reg_wlreg_on>;
-	vqmmc-supply =<&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
 	status = "okay";
 
 	brcmf: wifi@1 {
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts
index a31de900139d..7acd28658e6f 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts
@@ -159,7 +159,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
@@ -270,7 +270,7 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	touch@48 {
+	touchscreen@48 {
 		compatible = "ti,tsc2004";
 		reg = <0x48>;
 		pinctrl-names = "default";
@@ -419,7 +419,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>;
 
-	pinctrl_hog_1: hoggrp-1 {
+	pinctrl_hog_1: hoggrp {
 		fsl,pins = <
 			MX7D_PAD_SD3_RESET_B__GPIO6_IO11	0x5d
 			MX7D_PAD_GPIO1_IO13__GPIO1_IO13		0x7d
@@ -665,7 +665,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog_2>;
 
-	pinctrl_hog_2: hoggrp-2 {
+	pinctrl_hog_2: hoggrp {
 		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x7d
 			MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2	0x7d
diff --git a/arch/arm/boot/dts/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
index 5162fe227d1e..1b965652291b 100644
--- a/arch/arm/boot/dts/imx7d-pico-dwarf.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
@@ -32,7 +32,7 @@
 };
 
 &i2c1 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -40,6 +40,7 @@
 	sgtl5000: audio-codec@a {
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
 		clocks = <&sys_mclk>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
@@ -52,7 +53,7 @@
 };
 
 &i2c4 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -62,6 +63,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		#interrupt-cells = <2>;
+		interrupt-controller;
 		reg = <0x25>;
 	};
 
diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-hobbit.dts
index d917dc4f2f22..6ad39dca7009 100644
--- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-hobbit.dts
@@ -64,7 +64,7 @@
 		interrupt-parent = <&gpio2>;
 		interrupts = <7 0>;
 		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio2 7 0>;
+		pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&reg_3p3v>;
 		ti,x-min = /bits/ 16 <0>;
 		ti,x-max = /bits/ 16 <4095>;
diff --git a/arch/arm/boot/dts/imx7d-pico-nymph.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-nymph.dts
index 104a85254adb..af26284297a2 100644
--- a/arch/arm/boot/dts/imx7d-pico-nymph.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-nymph.dts
@@ -43,7 +43,7 @@
 };
 
 &i2c1 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -51,6 +51,7 @@
 	sgtl5000: audio-codec@a {
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
 		clocks = <&sys_mclk>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
@@ -64,7 +65,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-pi.dts
index f263e391e24c..62221131336f 100644
--- a/arch/arm/boot/dts/imx7d-pico-pi.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-pi.dts
@@ -61,6 +61,10 @@
 	};
 };
 
+&usdhc1 {
+	status = "disabled";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi
index e519897fae08..a1574ccec89c 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi
@@ -41,7 +41,7 @@
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
-        };
+	};
 
 	reg_wlreg_on: regulator-wlreg_on {
 		compatible = "regulator-fixed";
@@ -108,6 +108,14 @@
 	assigned-clock-rates = <0>, <32768>;
 };
 
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
 &ecspi3 {
 	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
@@ -170,7 +178,7 @@
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
@@ -432,18 +440,18 @@
 			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
 			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
 			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
-			MX7D_PAD_SD3_RESET_B__GPIO6_IO11                0x1  /* Ethernet reset */
+			MX7D_PAD_SD3_RESET_B__GPIO6_IO11		0x1  /* Ethernet reset */
 		>;
 	};
 
-	pinctrl_can1: can1frp {
+	pinctrl_can1: can1frpgrp {
 		fsl,pins = <
 			MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX	0x59
 			MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX	0x59
 		>;
 	};
 
-	pinctrl_can2: can2frp {
+	pinctrl_can2: can2frpgrp {
 		fsl,pins = <
 			MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX	0x59
 			MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX	0x59
@@ -491,25 +499,25 @@
 		>;
 	};
 
-	pinctrl_pwm1: pwm1 {
+	pinctrl_pwm1: pwm1grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO08__PWM1_OUT   0x7f
+			MX7D_PAD_GPIO1_IO08__PWM1_OUT	0x7f
 		>;
 	};
 
-	pinctrl_pwm2: pwm2 {
+	pinctrl_pwm2: pwm2grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO09__PWM2_OUT   0x7f
+			MX7D_PAD_GPIO1_IO09__PWM2_OUT	0x7f
 		>;
 	};
 
-	pinctrl_pwm3: pwm3 {
+	pinctrl_pwm3: pwm3grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__PWM3_OUT   0x7f
+			MX7D_PAD_GPIO1_IO10__PWM3_OUT	0x7f
 		>;
 	};
 
-	pinctrl_pwm4: pwm4grp{
+	pinctrl_pwm4: pwm4grp {
 		fsl,pins = <
 			MX7D_PAD_GPIO1_IO11__PWM4_OUT	0x7f
 		>;
@@ -555,7 +563,7 @@
 		>;
 	};
 
-	pinctrl_usbotg1_pwr: usbotg_pwr {
+	pinctrl_usbotg1_pwr: usbotgpwrgrp {
 		fsl,pins = <
 			MX7D_PAD_UART3_TX_DATA__GPIO4_IO5	0x14
 		>;
@@ -573,7 +581,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
 		fsl,pins = <
 			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
 			MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
@@ -585,7 +593,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
 		fsl,pins = <
 			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
 			MX7D_PAD_SD1_CLK__SD1_CLK		0x1b
@@ -623,7 +631,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
 			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
@@ -638,7 +646,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
 			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx7d-pinfunc.h
index 69f2c1ec8254..69f2c1ec8254 100644
--- a/arch/arm/boot/dts/imx7d-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pinfunc.h
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts
new file mode 100644
index 000000000000..ff9d50942884
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts
@@ -0,0 +1,595 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+ *
+ */
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "reMarkable 2.0";
+	compatible = "remarkable,imx7d-remarkable2", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart6;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	thermal-zones {
+		epd-thermal {
+			thermal-sensors = <&sy7636a>;
+			polling-delay-passive = <30000>;
+			polling-delay = <30000>;
+
+			trips {
+				trip0 {
+					temperature = <49000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		gpio = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <150>;
+	};
+
+	reg_digitizer: regulator-digitizer {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_DIGITIZER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pinctrl_digitizer_reg>;
+		pinctrl-1 = <&pinctrl_digitizer_reg>;
+		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>; /* 100 ms */
+	};
+
+	reg_touch: regulator-touch {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_TOUCH";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_reg>;
+		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi>;
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&buck1>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+			  <&clks IMX7D_CLKO2_ROOT_DIV>;
+	assigned-clock-parents = <&clks IMX7D_CKIL>;
+	assigned-clock-rates = <0>, <32768>;
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	wacom_digitizer: digitizer@9 {
+		compatible = "hid-over-i2c";
+		reg = <0x09>;
+		hid-descr-addr = <0x01>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wacom>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		vdd-supply = <&reg_digitizer>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	bd71815: pmic@4b {
+		compatible = "rohm,bd71815";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bd71815>;
+		interrupt-parent = <&gpio6>; /* PMIC_INT_B GPIO6_IO16 */
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		clocks = <&clks IMX7D_CLKO2_ROOT_SRC>;
+		clock-output-names = "bd71815-32k-out";
+		#clock-cells = <0>;
+		#gpio-cells = <2>;
+
+		regulators {
+			buck1: buck1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2: buck2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck3: buck3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <2700000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: buck4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: buck5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: ldo1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: ldo2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: ldo3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: ldo4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: ldo5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6: ldodvref {
+				regulator-name = "ldodvref";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo7: ldolpsr {
+				regulator-name = "ldolpsr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			boost: wled {
+				regulator-name = "wled";
+				regulator-min-microamp = <10>;
+				regulator-max-microamp = <25000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_touch>;
+		touchscreen-size-x = <880>;
+		touchscreen-size-y = <1280>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			reg = <0>;
+			linux,keycodes = <KEY_HOMEPAGE>;
+		};
+
+		button@1 {
+			reg = <1>;
+			linux,keycodes = <KEY_MENU>;
+		};
+
+		button@2 {
+			reg = <2>;
+			linux,keycodes = <KEY_BACK>;
+		};
+
+		button@3 {
+			reg = <3>;
+			linux,keycodes = <KEY_SEARCH>;
+		};
+
+		button@4 {
+			reg = <4>;
+			linux,keycodes = <KEY_VOLUMEDOWN>;
+		};
+
+		button@5 {
+			reg = <5>;
+			linux,keycodes = <KEY_VOLUMEUP>;
+		};
+
+		button@6 {
+			reg = <6>;
+			linux,keycodes = <KEY_CAMERA>;
+		};
+
+		button@7 {
+			reg = <7>;
+			linux,keycodes = <KEY_POWER>;
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	sy7636a: pmic@62 {
+		compatible = "silergy,sy7636a";
+		reg = <0x62>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_epdpmic>;
+		#thermal-sensor-cells = <0>;
+		epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			reg_epdpmic: vcom {
+				regulator-name = "vcom";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&usbotg2 {
+	srp-disable;
+	hnp-disable;
+	status = "okay";
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	vmmc-supply = <&reg_brcm>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc_lpsr {
+	pinctrl_digitizer_reg: digitizerreggrp {
+		fsl,pins = <
+			/* DIGITIZER_PWR_EN */
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14
+		>;
+	};
+
+	pinctrl_wacom: wacomgrp {
+		fsl,pins = <
+			/*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x00000014 FWE */
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x00000074 /* PDCTB */
+			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x00000034 /* WACOM INT */
+			/*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x00000014 WACOM PWR ENABLE */
+			/*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x00000074 WACOM RESET */
+		>;
+	};
+};
+
+&iomuxc {
+	pinctrl_bd71815: bd71815grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x59
+		>;
+	};
+
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			/* WIFI_PWR_EN */
+			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
+		>;
+	};
+
+	pinctrl_epdpmic: epdpmicgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21	0x00000074
+			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11	0x00000014
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* CYTTSP interrupt */
+			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x54
+			/* CYTTSP reset */
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13		0x04
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
+			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_touch_reg: touchreggrp {
+		fsl,pins = <
+			/* TOUCH_PWR_EN */
+			MX7D_PAD_GPIO1_IO11__GPIO1_IO11		0x14
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA09__UART6_DCE_TX		0x79
+			MX7D_PAD_EPDC_DATA08__UART6_DCE_RX		0x79
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY	0x74
+		>;
+	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <
+			/* WiFi Reg On */
+			MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x00000014
+			/* WiFi Sleep 32k */
+			MX7D_PAD_SD1_WP__CCM_CLKO2		0x00000014
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sbc-imx7.dts
index f8a868552707..f8a868552707 100644
--- a/arch/arm/boot/dts/imx7d-sbc-imx7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-sbc-imx7.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts
new file mode 100644
index 000000000000..40156cd9195f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx7d-sdb.dts"
+
+/ {
+	model = "Freescale i.MX7 SabreSD RevA Board";
+	compatible = "fsl,imx7d-sdb-reva", "fsl,imx7d";
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&fec2 {
+	/delete-property/phy-supply;
+};
+
+&iomuxc {
+	pinctrl_tsc2046_pendown: tsc2046-pendowngrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x59
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
+		>;
+	};
+
+	pinctrl_usb_otg2_vbus_reg_reva: usbotg2vbusregrevagrp {
+		fsl,pins = <
+			MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-sdb-sht11.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb-sht11.dts
index 996555596d40..996555596d40 100644
--- a/arch/arm/boot/dts/imx7d-sdb-sht11.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb-sht11.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts
new file mode 100644
index 000000000000..17236f90ab33
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts
@@ -0,0 +1,939 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	model = "Freescale i.MX7 SabreSD Board";
+	compatible = "fsl,imx7d-sdb", "fsl,imx7d";
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	spi-4 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi4>;
+		sck-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		extended_io: gpio-expander@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SD1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <200000>;
+		off-on-delay-us = <20000>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "brcm_reg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&extended_io 7 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_3v3: regulator-can2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-3v3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan2_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_fec2_3v3: regulator-fec2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec2-3v3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enet2_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_audio_5v: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	panel {
+		compatible = "innolux,at043tn24";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx7d-evk-wm8960",
+			     "fsl,imx-audio-wm8960";
+		model = "wm8960-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&codec>;
+		hp-det-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+		audio-routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Ext Spk", "SPK_LP",
+			"Ext Spk", "SPK_LN",
+			"Ext Spk", "SPK_RP",
+			"Ext Spk", "SPK_RN",
+			"LINPUT1", "AMIC",
+			"AMIC", "MICB";
+	};
+
+	sound-hdmi {
+		compatible = "fsl,imx-audio-sii902x";
+		model = "sii902x-audio";
+		audio-cpu = <&sai3>;
+		hdmi-out;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&adc2 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tsc2046@0 {
+		compatible = "ti,tsc2046";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <29 0>;
+		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
+		touchscreen-max-pressure = <255>;
+		wakeup-source;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	phy-reset-gpios = <&extended_io 5 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_fec2_3v3>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_3v3>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	mpl3115@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+		wlf,hp-cfg = <2 2 3>;
+		wlf,gpio-cfg = <1 3>;
+		assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
+				  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
+				  <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+		assigned-clock-rates = <0>, <884736000>, <12288000>;
+		AVDD-supply = <&reg_audio_3v3>;
+		DBVDD-supply = <&reg_audio_1v8>;
+		DCVDD-supply = <&reg_audio_1v8>;
+		SPKVDD1-supply = <&reg_audio_5v>;
+		SPKVDD2-supply = <&reg_audio_5v>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&reg_1p0d {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_1p2 {
+	vin-supply = <&sw2_reg>;
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <884736000>, <36864000>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3 &pinctrl_sai3_mclk>;
+	assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>,
+			  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
+			  <&clks IMX7D_SAI3_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <884736000>, <36864000>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	wakeup-source;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	wakeup-source;
+	keep-power-in-suspend;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	fsl,tuning-step = <2>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x14
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO	0x2
+			MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI	0x2
+			MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK	0x2
+			MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x59
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
+			MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x1
+			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x1
+			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x1
+			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x1
+			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x1
+			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x1
+			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x1
+			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x1
+			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x1
+			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x1
+			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x1
+			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x1
+		>;
+	};
+
+	pinctrl_enet2_reg: enet2reggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x14
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x59
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x59
+		>;
+	};
+
+	pinctrl_flexcan2_reg: flexcan2reggrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x59	/* CAN_STBY */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x59
+			MX7D_PAD_SD2_WP__GPIO5_IO10		0x59
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
+			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x59  /* headphone detect */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
+			MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+			MX7D_PAD_LCD_RESET__LCD_RESET		0x79
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
+			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
+			MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC	0x1f
+			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
+			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK     0x1f
+			MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC     0x1f
+			MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0    0x30
+			MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0    0x1f
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK   0x1f
+			MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC     0x1f
+			MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0    0x30
+		>;
+	};
+
+	pinctrl_spi4: spi4grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x59
+			MX7D_PAD_GPIO1_IO12__GPIO1_IO12	0x59
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x59
+		>;
+	};
+
+	pinctrl_tsc2046_pendown: tsc2046-pendowngrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x59
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX	0x79
+			MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX	0x79
+			MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS	0x79
+			MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS	0x79
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX	0x79
+			MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX	0x79
+			MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS	0x79
+			MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS	0x79
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1-gpiogrp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
+			MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
+			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59 /* vmmc */
+			MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59 /* VSELECT */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x1b
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
+		>;
+	};
+
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
+		>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B		0x74
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT		0x30
+		>;
+	};
+
+	pinctrl_usb_otg2_vbus_reg: usbotg2vbusreggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	  0x14
+		>;
+	};
+
+	pinctrl_sai3_mclk: sai3-mclk-grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK	0x1f
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-smegw01.dts b/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts
index 546268b8d0b1..7ed27c7ad726 100644
--- a/arch/arm/boot/dts/imx7d-smegw01.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts
@@ -13,6 +13,8 @@
 	compatible = "storopack,imx7d-smegw01", "fsl,imx7d";
 
 	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc3;
 		mmc2 = &usdhc2;
@@ -67,7 +69,7 @@
 	reg_wlan_rfkill: regulator-wlan-rfkill {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
-		pinctrl-2 = <&pinctrl_rfkill>;
+		pinctrl-0 = <&pinctrl_rfkill>;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-name = "wlan_rfkill";
@@ -97,8 +99,6 @@
 	sram@0 {
 		compatible = "microchip,48l640";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <16000000>;
 	};
 };
@@ -149,7 +149,7 @@
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 =<&pinctrl_i2c2>;
+	pinctrl-0 = <&pinctrl_i2c2>;
 	clock-frequency = <100000>;
 	status = "okay";
 
@@ -198,6 +198,7 @@
 &usbotg2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg2>;
+	over-current-active-low;
 	dr_mode = "host";
 	status = "okay";
 };
@@ -328,7 +329,7 @@
 		>;
 	};
 
-	pinctrl_rfkill: rfkillrp {
+	pinctrl_rfkill: rfkillgrp {
 		fsl,pins = <
 			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x17059
 		>;
@@ -354,19 +355,19 @@
 		>;
 	};
 
-	pinctrl_usbotg1_lpsr: usbotg1 {
+	pinctrl_usbotg1_lpsr: usbotg1grp {
 		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x04
 		>;
 	};
 
-	pinctrl_usbotg1_pwr: usbotg1-pwr {
+	pinctrl_usbotg1_pwr: usbotg1-pwrgrp {
 		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR	0x04
 		>;
 	};
 
-	pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpio {
+	pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpiogrp {
 		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x04
 		>;
@@ -374,7 +375,7 @@
 
 	pinctrl_usbotg2: usbotg2grp {
 		fsl,pins = <
-			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x04
+			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x5c
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx7d-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-tqma7.dtsi
index 3ee2017c1ab3..3ee2017c1ab3 100644
--- a/arch/arm/boot/dts/imx7d-tqma7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-tqma7.dtsi
diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-zii-rmu2.dts
index 1065941807e8..8f5566027c25 100644
--- a/arch/arm/boot/dts/imx7d-zii-rmu2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-zii-rmu2.dts
@@ -24,7 +24,7 @@
 		pinctrl-0 = <&pinctrl_leds_debug>;
 		pinctrl-names = "default";
 
-		debug {
+		led-debug {
 			label = "zii:green:debug1";
 			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -204,7 +204,7 @@
 	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu2";
 		current-speed = <1000000>;
 		#address-cells = <1>;
@@ -350,7 +350,7 @@
 
 &iomuxc_lpsr {
 	pinctrl_enet1_phy_interrupt: enet1phyinterruptgrp {
-		fsl,phy = <
+		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x08
 		>;
 	};
diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-zii-rpu2.dts
index 893bd30aa2a3..decc19af3b83 100644
--- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-zii-rpu2.dts
@@ -36,7 +36,7 @@
 		pinctrl-0 = <&pinctrl_leds_debug>;
 		pinctrl-names = "default";
 
-		debug {
+		led-debug {
 			label = "zii:green:debug1";
 			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -607,7 +607,7 @@
 	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu2";
 		current-speed = <1000000>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
index 7ceb7c09f7ad..d961c61a93af 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
@@ -48,7 +48,7 @@
 
 		opp-792000000 {
 			opp-hz = /bits/ 64 <792000000>;
-			opp-microvolt = <1000000>;
+			opp-microvolt = <1000000 950000 1250000>;
 			clock-latency-ns = <150000>;
 			opp-supported-hw = <0xd>, <0x7>;
 			opp-suspend;
@@ -56,7 +56,7 @@
 
 		opp-996000000 {
 			opp-hz = /bits/ 64 <996000000>;
-			opp-microvolt = <1100000>;
+			opp-microvolt = <1100000 1045000 1250000>;
 			clock-latency-ns = <150000>;
 			opp-supported-hw = <0xc>, <0x7>;
 			opp-suspend;
@@ -64,7 +64,7 @@
 
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1225000>;
+			opp-microvolt = <1225000 1200000 1250000>;
 			clock-latency-ns = <150000>;
 			opp-supported-hw = <0x8>, <0x3>;
 			opp-suspend;
@@ -165,6 +165,15 @@
 		  reg = <0x306d0000 0x10000>;
 		  status = "disabled";
 	};
+
+	pxp: pxp@30700000 {
+		compatible = "fsl,imx7d-pxp";
+		reg = <0x30700000 0x10000>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_PXP_CLK>;
+		clock-names = "axi";
+	};
 };
 
 &aips3 {
@@ -208,9 +217,6 @@
 };
 
 &ca_funnel_in_ports {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
 	port@1 {
 		reg = <1>;
 		ca_funnel_in_port1: endpoint {
diff --git a/arch/arm/boot/dts/imx7s-colibri-aster.dts b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-aster.dts
index 58ebb02d948a..58ebb02d948a 100644
--- a/arch/arm/boot/dts/imx7s-colibri-aster.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-aster.dts
diff --git a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-eval-v3.dts
index 38de76630d6a..38de76630d6a 100644
--- a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-eval-v3.dts
diff --git a/arch/arm/boot/dts/imx7s-colibri-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-iris-v2.dts
index 72b5c17ab1ab..72b5c17ab1ab 100644
--- a/arch/arm/boot/dts/imx7s-colibri-iris-v2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-iris-v2.dts
diff --git a/arch/arm/boot/dts/imx7s-colibri-iris.dts b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-iris.dts
index 26ba72c17feb..26ba72c17feb 100644
--- a/arch/arm/boot/dts/imx7s-colibri-iris.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-iris.dts
diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s-colibri.dtsi
index ef51395d3537..ef51395d3537 100644
--- a/arch/arm/boot/dts/imx7s-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-colibri.dtsi
diff --git a/arch/arm/boot/dts/imx7s-mba7.dts b/arch/arm/boot/dts/nxp/imx/imx7s-mba7.dts
index 8e4cf589c92c..8e4cf589c92c 100644
--- a/arch/arm/boot/dts/imx7s-mba7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-mba7.dts
diff --git a/arch/arm/boot/dts/imx7s-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s-tqma7.dtsi
index 7a190fdb2d30..7a190fdb2d30 100644
--- a/arch/arm/boot/dts/imx7s-tqma7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-tqma7.dtsi
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
index e8734d218b9d..56dedd4fb8f0 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
@@ -23,7 +23,7 @@
 		pinctrl-0 = <&pinctrl_gpio>;
 		autorepeat;
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_BACK>;
@@ -31,30 +31,6 @@
 		};
 	};
 
-	reg_brcm: regulator-brcm {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_brcm_reg>;
-		regulator-name = "brcm_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <200000>;
-	};
-
-	reg_bt: regulator-bt {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_bt_reg>;
-		enable-active-high;
-		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
-		regulator-name = "bt_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
 	reg_peri_3p15v: regulator-peri-3p15v {
 		compatible = "regulator-fixed";
 		regulator-name = "peri_3p15v_reg";
@@ -63,6 +39,14 @@
 		regulator-always-on;
 	};
 
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "imx7-sgtl5000";
@@ -94,7 +78,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
@@ -210,6 +194,7 @@
 				remote-endpoint = <&mipi_from_sensor>;
 				clock-lanes = <0>;
 				data-lanes = <1>;
+				link-frequencies = /bits/ 64 <330000000>;
 			};
 		};
 	};
@@ -287,6 +272,14 @@
 	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
 	uart-has-rtscts;
 	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_reg>;
+		shutdown-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		max-speed = <3000000>;
+	};
 };
 
 &uart6 {
@@ -304,14 +297,21 @@
 };
 
 &usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	bus-width = <4>;
 	keep-power-in-suspend;
 	no-1-8-v;
 	non-removable;
-	vmmc-supply = <&reg_brcm>;
+	mmc-pwrseq = <&sdio_pwrseq>;
 	status = "okay";
+
+	wifi@0 {
+		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+		reg = <0>;
+	};
 };
 
 &usdhc3 {
@@ -458,7 +458,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
 			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
@@ -474,7 +474,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
 			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
index 29148285f9fc..9235dd7e93bb 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
@@ -73,7 +73,6 @@
 			device_type = "cpu";
 			reg = <0>;
 			clock-frequency = <792000000>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clks IMX7D_CLK_ARM>;
 			cpu-idle-states = <&cpu_sleep_wait>;
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -176,6 +175,34 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	video_mux: csi-mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+		};
+
+		port@1 {
+			reg = <1>;
+
+			csi_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_csi_mux>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			csi_mux_to_csi: endpoint {
+				remote-endpoint = <&csi_from_csi_mux>;
+			};
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -183,6 +210,15 @@
 		interrupt-parent = <&gpc>;
 		ranges;
 
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX7D_OCRAM_CLK>;
+		};
+
 		funnel@30041000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x30041000 0x1000>;
@@ -190,7 +226,11 @@
 			clock-names = "apb_pclk";
 
 			ca_funnel_in_ports: in-ports {
-				port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
 					ca_funnel_in_port0: endpoint {
 						remote-endpoint = <&etm0_out_port>;
 					};
@@ -454,7 +494,7 @@
 			};
 
 			gpt1: timer@302d0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x302d0000 0x10000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT1_ROOT_CLK>,
@@ -463,7 +503,7 @@
 			};
 
 			gpt2: timer@302e0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x302e0000 0x10000>;
 				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT2_ROOT_CLK>,
@@ -473,7 +513,7 @@
 			};
 
 			gpt3: timer@302f0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x302f0000 0x10000>;
 				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT3_ROOT_CLK>,
@@ -483,7 +523,7 @@
 			};
 
 			gpt4: timer@30300000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x30300000 0x10000>;
 				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT4_ROOT_CLK>,
@@ -513,37 +553,9 @@
 
 				mux: mux-controller {
 					compatible = "mmio-mux";
-					#mux-control-cells = <0>;
+					#mux-control-cells = <1>;
 					mux-reg-masks = <0x14 0x00000010>;
 				};
-
-				video_mux: csi-mux {
-					compatible = "video-mux";
-					mux-controls = <&mux 0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					status = "disabled";
-
-					port@0 {
-						reg = <0>;
-					};
-
-					port@1 {
-						reg = <1>;
-
-						csi_mux_from_mipi_vc0: endpoint {
-							remote-endpoint = <&mipi_vc0_to_csi_mux>;
-						};
-					};
-
-					port@2 {
-						reg = <2>;
-
-						csi_mux_to_csi: endpoint {
-							remote-endpoint = <&csi_from_csi_mux>;
-						};
-					};
-				};
 			};
 
 			ocotp: efuse@30350000 {
@@ -605,6 +617,7 @@
 					nvmem-cells = <&tempmon_calib>,	<&fuse_grade>;
 					nvmem-cell-names = "calib", "temp_grade";
 					clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+					#thermal-sensor-cells = <0>;
 				};
 			};
 
@@ -622,6 +635,15 @@
 					clock-names = "snvs-rtc";
 				};
 
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					value = <0x60>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+
 				snvs_pwrkey: snvs-powerkey {
 					compatible = "fsl,sec-v4.0-pwrkey";
 					regmap = <&snvs>;
@@ -658,7 +680,6 @@
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <3>;
 				interrupt-parent = <&intc>;
-				#power-domain-cells = <1>;
 
 				pgc {
 					#address-cells = <1>;
@@ -721,6 +742,8 @@
 				clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
 					<&clks IMX7D_ECSPI4_ROOT_CLK>;
 				clock-names = "ipg", "per";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 6 7 1>, <&sdma 7 7 2>;
 				status = "disabled";
 			};
 
@@ -800,10 +823,8 @@
 				compatible = "fsl,imx7-csi";
 				reg = <0x30710000 0x10000>;
 				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_CSI_MCLK_ROOT_CLK>,
-					 <&clks IMX7D_CLK_DUMMY>;
-				clock-names = "axi", "mclk", "dcic";
+				clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>;
+				clock-names = "mclk";
 				status = "disabled";
 
 				port {
@@ -814,7 +835,7 @@
 			};
 
 			lcdif: lcdif@30730000 {
-				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+				compatible = "fsl,imx7d-lcdif", "fsl,imx6sx-lcdif";
 				reg = <0x30730000 0x10000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
@@ -853,6 +874,26 @@
 					};
 				};
 			};
+
+			mipi_dsi: dsi@30760000 {
+				compatible = "fsl,imx7d-mipi-dsim", "fsl,imx8mm-mipi-dsim";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30760000 0x400>;
+				clocks = <&clks IMX7D_MIPI_DSI_ROOT_CLK>,
+					 <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+				clock-names = "bus_clk", "sclk_mipi";
+				assigned-clocks = <&clks IMX7D_MIPI_DSI_ROOT_SRC>,
+						  <&clks IMX7D_PLL_SYS_PFD5_CLK>;
+				assigned-clock-parents = <&clks IMX7D_PLL_SYS_PFD5_CLK>;
+				assigned-clock-rates = <0>, <333000000>;
+				power-domains = <&pgc_mipi_phy>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				samsung,burst-clock-frequency = <891000000>;
+				samsung,esc-clock-frequency = <20000000>;
+				samsung,pll-clock-frequency = <24000000>;
+				status = "disabled";
+			};
 		};
 
 		aips3: bus@30800000 {
@@ -878,6 +919,8 @@
 					clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
 						<&clks IMX7D_ECSPI1_ROOT_CLK>;
 					clock-names = "ipg", "per";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 0 7 1>, <&sdma 1 7 2>;
 					status = "disabled";
 				};
 
@@ -890,6 +933,8 @@
 					clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
 						<&clks IMX7D_ECSPI2_ROOT_CLK>;
 					clock-names = "ipg", "per";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 2 7 1>, <&sdma 3 7 2>;
 					status = "disabled";
 				};
 
@@ -902,6 +947,8 @@
 					clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
 						<&clks IMX7D_ECSPI3_ROOT_CLK>;
 					clock-names = "ipg", "per";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 4 7 1>, <&sdma 5 7 2>;
 					status = "disabled";
 				};
 
@@ -1184,6 +1231,8 @@
 					<&clks IMX7D_USDHC1_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1196,6 +1245,8 @@
 					<&clks IMX7D_USDHC2_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1208,6 +1259,8 @@
 					<&clks IMX7D_USDHC3_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1224,7 +1277,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@30bd0000 {
+			sdma: dma-controller@30bd0000 {
 				compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -1257,23 +1310,22 @@
 			};
 		};
 
-		dma_apbh: dma-apbh@33000000 {
+		dma_apbh: dma-controller@33000000 {
 			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x33000000 0x2000>;
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 			#dma-cells = <1>;
 			dma-channels = <4>;
 			clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
 		};
 
-		gpmi: nand-controller@33002000{
+		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx7ulp-com.dts b/arch/arm/boot/dts/nxp/imx/imx7ulp-com.dts
index d76fea3b35c6..d76fea3b35c6 100644
--- a/arch/arm/boot/dts/imx7ulp-com.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7ulp-com.dts
diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts
index eff51e113db4..eff51e113db4 100644
--- a/arch/arm/boot/dts/imx7ulp-evk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts
diff --git a/arch/arm/boot/dts/imx7ulp-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx7ulp-pinfunc.h
index c0148d79b62d..c0148d79b62d 100644
--- a/arch/arm/boot/dts/imx7ulp-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx7ulp-pinfunc.h
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi
index bcec98b96411..880b9a4f32b0 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi
@@ -189,7 +189,7 @@
 		};
 
 		usbotg1: usb@40330000 {
-			compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+			compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", "fsl,imx27-usb";
 			reg = <0x40330000 0x200>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_USB0>;
@@ -202,21 +202,23 @@
 		};
 
 		usbmisc1: usbmisc@40330200 {
-			compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc";
+			compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
 			#index-cells = <1>;
 			reg = <0x40330200 0x200>;
 		};
 
 		usbphy1: usb-phy@40350000 {
-			compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy";
+			compatible = "fsl,imx7ulp-usbphy";
 			reg = <0x40350000 0x1000>;
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>;
 			#phy-cells = <0>;
+			nxp,sim = <&sim>;
 		};
 
 		usdhc0: mmc@40370000 {
-			compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
+			compatible = "fsl,imx7ulp-usdhc";
 			reg = <0x40370000 0x10000>;
 			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
@@ -230,7 +232,7 @@
 		};
 
 		usdhc1: mmc@40380000 {
-			compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
+			compatible = "fsl,imx7ulp-usdhc";
 			reg = <0x40380000 0x10000>;
 			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
@@ -328,8 +330,9 @@
 			compatible = "fsl,imx7ulp-lpi2c";
 			reg = <0x40a40000 0x10000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>;
-			clock-names = "ipg";
+			clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>,
+				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
+			clock-names = "per", "ipg";
 			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>;
 			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
 			assigned-clock-rates = <48000000>;
@@ -340,8 +343,9 @@
 			compatible = "fsl,imx7ulp-lpi2c";
 			reg = <0x40a50000 0x10000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>;
-			clock-names = "ipg";
+			clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>,
+				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
+			clock-names = "per", "ipg";
 			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>;
 			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
 			assigned-clock-rates = <48000000>;
@@ -395,6 +399,7 @@
 				 <&pcc3 IMX7ULP_CLK_PCTLC>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc1 0 0 20>;
+			ngpios = <20>;
 		};
 
 		gpio_ptd: gpio@40af0000 {
@@ -409,6 +414,7 @@
 				 <&pcc3 IMX7ULP_CLK_PCTLD>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc1 0 32 12>;
+			ngpios = <12>;
 		};
 
 		gpio_pte: gpio@40b00000 {
@@ -423,6 +429,7 @@
 				 <&pcc3 IMX7ULP_CLK_PCTLE>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc1 0 64 16>;
+			ngpios = <16>;
 		};
 
 		gpio_ptf: gpio@40b10000 {
@@ -437,6 +444,7 @@
 				 <&pcc3 IMX7ULP_CLK_PCTLF>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc1 0 96 20>;
+			ngpios = <20>;
 		};
 	};
 
@@ -456,6 +464,8 @@
 			compatible = "fsl,imx7ulp-ocotp", "syscon";
 			reg = <0x410a6000 0x4000>;
 			clocks = <&scg1 IMX7ULP_CLK_DUMMY>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imxrt1050-evk.dts b/arch/arm/boot/dts/nxp/imx/imxrt1050-evk.dts
index 6a9c10decf52..6a9c10decf52 100644
--- a/arch/arm/boot/dts/imxrt1050-evk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imxrt1050-evk.dts
diff --git a/arch/arm/boot/dts/imxrt1050-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imxrt1050-pinfunc.h
index 22c14a3262ad..22c14a3262ad 100644
--- a/arch/arm/boot/dts/imxrt1050-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imxrt1050-pinfunc.h
diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi
index 03e6a858a7be..b0bad0d1ba36 100644
--- a/arch/arm/boot/dts/imxrt1050.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi
@@ -4,7 +4,7 @@
  * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
  */
 
-#include "armv7-m.dtsi"
+#include "../../armv7-m.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/imxrt1050-clock.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -87,13 +87,13 @@
 			reg = <0x402c0000 0x4000>;
 			interrupts = <110>;
 			clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
-				<&clks IMXRT1050_CLK_OSC>,
+				<&clks IMXRT1050_CLK_AHB_PODF>,
 				<&clks IMXRT1050_CLK_USDHC1>;
 			clock-names = "ipg", "ahb", "per";
 			bus-width = <4>;
 			fsl,wp-controller;
 			no-1-8-v;
-			max-frequency = <4000000>;
+			max-frequency = <200000000>;
 			fsl,tuning-start-tap = <20>;
 			fsl,tuning-step = <2>;
 			status = "disabled";
diff --git a/arch/arm/boot/dts/imxrt1170-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imxrt1170-pinfunc.h
index 3b9fff2f08e1..3b9fff2f08e1 100644
--- a/arch/arm/boot/dts/imxrt1170-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imxrt1170-pinfunc.h
diff --git a/arch/arm/boot/dts/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
index aac42df9ecf6..65fde4f52587 100644
--- a/arch/arm/boot/dts/mba6ulx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
@@ -35,29 +35,32 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_buttons>;
 
-		button1 {
+		button-1 {
 			label = "s14";
 			linux,code = <KEY_1>;
 			gpios = <&expander_in0 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 
-		button2 {
+		button-2 {
 			label = "s6";
 			linux,code = <KEY_2>;
 			gpios = <&expander_in0 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 
-		button3 {
+		button-3 {
 			label = "s7";
 			linux,code = <KEY_3>;
 			gpios = <&expander_in0 2 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 
 		power-button {
 			label = "POWER";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -139,10 +142,17 @@
 
 	sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
 		ssi-controller = <&sai1>;
 		audio-codec = <&tlv320aic32x4>;
 		audio-asrc = <&asrc>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"IN1_L", "Line In Jack",
+			"IN1_R", "Line In Jack",
+			"Line Out Jack", "LOL",
+			"Line Out Jack", "LOR";
 	};
 };
 
@@ -226,7 +236,7 @@
 	};
 
 	jc42: temperature-sensor@19 {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x19>;
 	};
 
@@ -235,6 +245,7 @@
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		vcc-supply = <&reg_mba6ul_3v3>;
 	};
 
 	expander_in0: gpio-expander@21 {
@@ -248,6 +259,7 @@
 		#interrupt-cells = <2>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		vcc-supply = <&reg_mba6ul_3v3>;
 
 		enet1_int-hog {
 			gpio-hog;
@@ -267,6 +279,7 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		vcc-supply = <&reg_mba6ul_3v3>;
 	};
 
 	analog_touch: touchscreen@41 {
@@ -274,10 +287,9 @@
 		reg = <0x41>;
 		interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-parent = <&gpio4>;
-		interrupt-controller;
 		status = "disabled";
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			st,adc-freq = <1>;      /* 3.25 MHz ADC clock speed */
 			st,ave-ctrl = <3>;      /* 8 sample average control */
@@ -300,6 +312,7 @@
 		compatible = "nxp,se97b", "atmel,24c02";
 		reg = <0x51>;
 		pagesize = <16>;
+		vcc-supply = <&reg_mba6ul_3v3>;
 	};
 };
 
@@ -461,7 +474,7 @@
 
 	pinctrl_pwm2: pwm2grp {
 		fsl,pins = <
-			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
 			MX6UL_PAD_GPIO1_IO09__PWM2_OUT		0x00003050
 		>;
 	};
@@ -499,7 +512,7 @@
 		>;
 	};
 
-	pinctrl_uart6dte: uart6dte {
+	pinctrl_uart6dte: uart6dtegrp {
 		fsl,pins = <
 			MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX	0x1b0b1
 			MX6UL_PAD_CSI_MCLK__UART6_DTE_RX	0x1b0b1
@@ -531,7 +544,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x00017069
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x000170b9
@@ -546,7 +559,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x00017069
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x000170f9
diff --git a/arch/arm/boot/dts/nxp/lpc/Makefile b/arch/arm/boot/dts/nxp/lpc/Makefile
new file mode 100644
index 000000000000..56b9a0ebb917
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/lpc/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_LPC18XX) += \
+	lpc4337-ciaa.dtb \
+	lpc4350-hitex-eval.dtb \
+	lpc4357-ea4357-devkit.dtb \
+	lpc4357-myd-lpc4357.dtb
+dtb-$(CONFIG_ARCH_LPC32XX) += \
+	lpc3250-ea3250.dtb \
+	lpc3250-phy3250.dtb
diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
index 1bb686a7b3ec..152e98cf0c4e 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
@@ -11,7 +11,7 @@
  *
  */
 
-#include "armv7-m.dtsi"
+#include "../../armv7-m.dtsi"
 
 #include "dt-bindings/clock/lpc18xx-cgu.h"
 #include "dt-bindings/clock/lpc18xx-ccu.h"
@@ -74,7 +74,7 @@
 		sct_pwm: pwm@40000000 {
 			compatible = "nxp,lpc1850-sct-pwm";
 			reg = <0x40000000 0x1000>;
-			clocks =<&ccu1 CLK_CPU_SCT>;
+			clocks = <&ccu1 CLK_CPU_SCT>;
 			clock-names = "pwm";
 			resets = <&rgu 37>;
 			#pwm-cells = <3>;
@@ -100,23 +100,25 @@
 			memcpy-bus-width = <32>;
 		};
 
-		spifi: flash-controller@40003000 {
+		spifi: spi@40003000 {
 			compatible = "nxp,lpc1773-spifi";
 			reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
 			reg-names = "spifi", "flash";
 			interrupts = <30>;
 			clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
 			clock-names = "spifi", "reg";
+			#address-cells = <1>;
+			#size-cells = <0>;
 			resets = <&rgu 53>;
 			status = "disabled";
 		};
 
-		mmcsd: mmcsd@40004000 {
+		mmcsd: mmc@40004000 {
 			compatible = "snps,dw-mshc";
 			reg = <0x40004000 0x1000>;
 			interrupts = <6>;
-			clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>;
-			clock-names = "ciu", "biu";
+			clocks = <&ccu1 CLK_CPU_SDIO>, <&ccu2 CLK_SDIO>;
+			clock-names = "biu", "ciu";
 			resets = <&rgu 20>;
 			status = "disabled";
 		};
@@ -535,3 +537,7 @@
 		};
 	};
 };
+
+&nvic {
+	arm,num-irq-priority-bits = <3>;
+};
diff --git a/arch/arm/boot/dts/lpc3250-ea3250.dts b/arch/arm/boot/dts/nxp/lpc/lpc3250-ea3250.dts
index 63c6f17bb7c9..63c6f17bb7c9 100644
--- a/arch/arm/boot/dts/lpc3250-ea3250.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc3250-ea3250.dts
diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts
index 21a6d0bca1e8..21a6d0bca1e8 100644
--- a/arch/arm/boot/dts/lpc3250-phy3250.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
index c87066d6c995..2236901a0031 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
@@ -77,12 +77,13 @@
 			status = "disabled";
 		};
 
-		dma: dma@31000000 {
+		dma: dma-controller@31000000 {
 			compatible = "arm,pl080", "arm,primecell";
 			reg = <0x31000000 0x1000>;
 			interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk LPC32XX_CLK_DMA>;
 			clock-names = "apb_pclk";
+			#dma-cells = <2>;
 		};
 
 		usb {
@@ -94,7 +95,7 @@
 			/*
 			 * Enable either ohci or usbd (gadget)!
 			 */
-			ohci: ohci@0 {
+			ohci: usb@0 {
 				compatible = "nxp,ohci-nxp", "usb-ohci";
 				reg = <0x0 0x300>;
 				interrupt-parent = <&sic1>;
@@ -224,8 +225,8 @@
 				status = "disabled";
 			};
 
-			sd: sd@20098000 {
-				compatible = "arm,pl18x", "arm,primecell";
+			sd: mmc@20098000 {
+				compatible = "arm,pl180", "arm,primecell";
 				reg = <0x20098000 0x1000>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
 					     <13 IRQ_TYPE_LEVEL_HIGH>;
@@ -298,11 +299,11 @@
 				clocks = <&clk LPC32XX_CLK_I2C2>;
 			};
 
-			mpwm: mpwm@400e8000 {
+			mpwm: pwm@400e8000 {
 				compatible = "nxp,lpc3220-motor-pwm";
 				reg = <0x400e8000 0x78>;
+				#pwm-cells = <3>;
 				status = "disabled";
-				#pwm-cells = <2>;
 			};
 		};
 
@@ -315,7 +316,7 @@
 			/* System Control Block */
 			scb {
 				compatible = "simple-bus";
-				ranges = <0x0 0x040004000 0x00001000>;
+				ranges = <0x0 0x40004000 0x00001000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 
@@ -481,6 +482,7 @@
 				compatible = "nxp,lpc3220-pwm";
 				reg = <0x4005c000 0x4>;
 				clocks = <&clk LPC32XX_CLK_PWM1>;
+				#pwm-cells = <3>;
 				assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
 				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 				status = "disabled";
@@ -490,6 +492,7 @@
 				compatible = "nxp,lpc3220-pwm";
 				reg = <0x4005c004 0x4>;
 				clocks = <&clk LPC32XX_CLK_PWM2>;
+				#pwm-cells = <3>;
 				assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
 				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/lpc4337-ciaa.dts b/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts
index beddaba85393..5ff43c825944 100644
--- a/arch/arm/boot/dts/lpc4337-ciaa.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts
@@ -108,14 +108,14 @@
 	};
 
 	ssp_pins: ssp-pins {
-		ssp1_cs {
+		ssp1_cs_cfg {
 			pins = "p6_7";
 			function = "gpio";
 			bias-pull-up;
 			bias-disable;
 		};
 
-		ssp1_miso_mosi {
+		ssp1_miso_mosi_cfg {
 			pins = "p1_3", "p1_4";
 			function = "ssp1";
 			slew-rate = <1>;
@@ -124,7 +124,7 @@
 			input-schmitt-disable;
 		};
 
-		ssp1_sck {
+		ssp1_sck_cfg {
 			pins = "pf_4";
 			function = "ssp1";
 			slew-rate = <1>;
diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts
index 93d0c2e99e7c..18f757c56905 100644
--- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts
@@ -43,50 +43,50 @@
 		poll-interval = <100>;
 		autorepeat;
 
-		button0 {
+		button-0 {
 			label = "joy:right";
 			linux,code = <KEY_RIGHT>;
 			gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
 		};
 
-		button1 {
+		button-1 {
 			label = "joy:up";
 			linux,code = <KEY_UP>;
 			gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
 		};
 
 
-		button2 {
+		button-2 {
 			label = "joy:enter";
 			linux,code = <KEY_ENTER>;
 			gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
 		};
 
-		button3 {
+		button-3 {
 			label = "joy:left";
 			linux,code = <KEY_LEFT>;
 			gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
 		};
 
-		button4 {
+		button-4 {
 			label = "joy:down";
 			linux,code = <KEY_DOWN>;
 			gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
 		};
 
-		button5 {
+		button-5 {
 			label = "user:sw3";
 			linux,code = <KEY_F1>;
 			gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
 		};
 
-		button6 {
+		button-6 {
 			label = "user:sw4";
 			linux,code = <KEY_F2>;
 			gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
 		};
 
-		button7 {
+		button-7 {
 			label = "user:sw5";
 			linux,code = <KEY_F3>;
 			gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>;
@@ -406,6 +406,9 @@
 		ext_sram: sram@2,0 {
 			compatible = "mmio-sram";
 			reg = <2 0 0x80000>; /* 512 KiB SRAM on IS62WV25616 */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 2 0 0x80000>;
 		};
 	};
 };
@@ -451,8 +454,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spifi_pins>;
 
-	flash {
+	flash@0 {
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		spi-rx-bus-width = <4>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/lpc4350.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi
index c4422f587055..707d22a219d8 100644
--- a/arch/arm/boot/dts/lpc4350.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi
@@ -24,16 +24,25 @@
 		sram0: sram@10000000 {
 			compatible = "mmio-sram";
 			reg = <0x10000000 0x20000>; /* 96 + 32 KiB local SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 
 		sram1: sram@10080000 {
 			compatible = "mmio-sram";
 			reg = <0x10080000 0x12000>; /* 64 + 8 KiB local SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 
 		sram2: sram@20000000 {
 			compatible = "mmio-sram";
 			reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
index 224f80a4a31d..7ccb4c2ca571 100644
--- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
@@ -60,31 +60,31 @@
 		poll-interval = <100>;
 		autorepeat;
 
-		button0 {
+		button-0 {
 			label = "joy_enter";
 			linux,code = <KEY_ENTER>;
 			gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
 		};
 
-		button1 {
+		button-1 {
 			label = "joy_left";
 			linux,code = <KEY_LEFT>;
 			gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>;
 		};
 
-		button2 {
+		button-2 {
 			label = "joy_up";
 			linux,code = <KEY_UP>;
 			gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>;
 		};
 
-		button3 {
+		button-3 {
 			label = "joy_right";
 			linux,code = <KEY_RIGHT>;
 			gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>;
 		};
 
-		button4 {
+		button-4 {
 			label = "joy_down";
 			linux,code = <KEY_DOWN>;
 			gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>;
@@ -403,7 +403,7 @@
 	};
 
 	ssp0_pins: ssp0-pins {
-		ssp0_sck_miso_mosi {
+		ssp0_sck_miso_mosi_cfg {
 			pins = "pf_0", "pf_2", "pf_3";
 			function = "ssp0";
 			slew-rate = <1>;
@@ -412,7 +412,7 @@
 			input-schmitt-disable;
 		};
 
-		ssp0_ssel {
+		ssp0_ssel_cfg {
 			pins = "pf_1";
 			function = "ssp0";
 			bias-pull-up;
@@ -452,12 +452,12 @@
 	};
 
 	usb0_pins: usb0-pins {
-		usb0_pwr_enable {
+		usb0_pwr_enable_cfg {
 			pins = "p2_3";
 			function = "usb0";
 		};
 
-		usb0_pwr_fault {
+		usb0_pwr_fault_cfg {
 			pins = "p8_0";
 			function = "usb0";
 			bias-disable;
@@ -482,8 +482,8 @@
 		reg = <0x1d>;
 	};
 
-	lm75@48 {
-		compatible = "nxp,lm75";
+	temperature-sensor@48 {
+		compatible = "national,lm75b";
 		reg = <0x48>;
 	};
 
@@ -582,8 +582,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spifi_pins>;
 
-	flash {
+	flash@0 {
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		spi-cpol;
 		spi-cpha;
 		spi-rx-bus-width = <4>;
diff --git a/arch/arm/boot/dts/lpc4357-myd-lpc4357.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
index 1f84654df50c..d18f2b2caf68 100644
--- a/arch/arm/boot/dts/lpc4357-myd-lpc4357.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
@@ -63,6 +63,7 @@
 
 	panel: panel {
 		compatible = "innolux,at070tn92";
+		power-supply = <&vcc>;
 
 		port {
 			panel_input: endpoint {
@@ -511,7 +512,7 @@
 	clock-frequency = <400000>;
 
 	sensor@49 {
-		compatible = "lm75";
+		compatible = "national,lm75";
 		reg = <0x49>;
 	};
 
@@ -543,7 +544,7 @@
 	pinctrl-0 = <&enet_rmii_pins>;
 	phy-handle = <&phy1>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -569,8 +570,9 @@
 	pinctrl-0 = <&spifi_pins>;
 
 	/* Atmel AT25DF321A */
-	flash {
+	flash@0 {
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		spi-max-frequency = <51000000>;
 		spi-cpol;
 		spi-cpha;
diff --git a/arch/arm/boot/dts/lpc4357.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi
index 72f12db8d53a..d138ee7869ff 100644
--- a/arch/arm/boot/dts/lpc4357.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi
@@ -24,16 +24,25 @@
 		sram0: sram@10000000 {
 			compatible = "mmio-sram";
 			reg = <0x10000000 0x8000>; /* 32 KiB local SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 
 		sram1: sram@10080000 {
 			compatible = "mmio-sram";
 			reg = <0x10080000 0xa000>; /* 32 + 8 KiB local SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 
 		sram2: sram@20000000 {
 			compatible = "mmio-sram";
 			reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/ls/Makefile b/arch/arm/boot/dts/nxp/ls/Makefile
new file mode 100644
index 000000000000..53240b04c968
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_LS1021A) += \
+	ls1021a-iot.dtb \
+	ls1021a-moxa-uc-8410a.dtb \
+	ls1021a-qds.dtb \
+	ls1021a-tqmls1021a-mbls1021a.dtb \
+	ls1021a-tsn.dtb \
+	ls1021a-twr.dtb
+
+ls1021a-tqmls1021a-mbls1021a-hdmi-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-hdmi.dtbo
+ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtbo
+ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtbo
+ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtbo
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-hdmi.dtb
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtb
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtb
diff --git a/arch/arm/boot/dts/ls1021a-iot.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts
index ce8e26d7791f..e13ccae629a7 100644
--- a/arch/arm/boot/dts/ls1021a-iot.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts
@@ -62,19 +62,19 @@
 	};
 };
 
-&can0{
+&can0 {
 	status = "disabled";
 };
 
-&can1{
+&can1 {
 	status = "disabled";
 };
 
-&can2{
+&can2 {
 	status = "disabled";
 };
 
-&can3{
+&can3 {
 	status = "okay";
 };
 
@@ -125,7 +125,7 @@
 	status = "okay";
 };
 
-&esdhc{
+&esdhc {
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-moxa-uc-8410a.dts
index f3ddea934f1b..d2cae8c7d7a6 100644
--- a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-moxa-uc-8410a.dts
@@ -30,11 +30,11 @@
 	};
 
 	reg_3p3v: regulator-3p3v {
-		  compatible = "regulator-fixed";
-		  regulator-name = "3P3V";
-		  regulator-min-microvolt = <3300000>;
-		  regulator-max-microvolt = <3300000>;
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts
index f1acb97aee69..a880875ced83 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts
@@ -66,7 +66,7 @@
 	bus-num = <0>;
 	status = "okay";
 
-	dspiflash: at45db021d@0 {
+	dspiflash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
@@ -187,7 +187,7 @@
 		 <0x3 0x0 0x0 0x7fb00000 0x00000100>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
@@ -211,8 +211,8 @@
 		device-width = <1>;
 		ranges = <0 3 0 0x100>;
 
-		mdio-mux-emi1 {
-			compatible = "mdio-mux-mmioreg";
+		mdio-mux@54 {
+			compatible = "mdio-mux-mmioreg", "mdio-mux";
 			mdio-parent-bus = <&mdio0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso
new file mode 100644
index 000000000000..e713a2ecbfc2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&sii9022a_in>;
+		};
+	};
+};
+
+&hdmi_out {
+	status = "okay";
+};
+
+&sii9022a {
+	status = "okay";
+};
+
+&sii9022a_in {
+	remote-endpoint = <&dcu_out>;
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
new file mode 100644
index 000000000000..e9708f3c6740
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&lvds_encoder_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "tianma,tm070jvhg33";
+	status = "okay";
+};
+
+&lvds_encoder {
+	status = "okay";
+};
+
+&lvds_encoder_in {
+	remote-endpoint = <&dcu_out>;
+};
+
+&lvds_encoder_out {
+	remote-endpoint = <&panel_in>;
+};
+
+&panel_in {
+	remote-endpoint = <&lvds_encoder_out>;
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso
new file mode 100644
index 000000000000..66cedc2dcd96
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "cdtech,s070swv29hg-dc44";
+	status = "okay";
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pca9554_0>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		/* LCD_PWR_EN -> TSC_WAKE */
+		wake-gpios = <&pca9554_1 4 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&reg_3p3v>;
+		vcc-supply = <&reg_3p3v>;
+		gain = <20>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&panel_in {
+	remote-endpoint = <&dcu_out>;
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso
new file mode 100644
index 000000000000..8b9455bffbd2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "cdtech,s070pws19hp-fc21";
+	status = "okay";
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pca9554_0>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		/* LCD_PWR_EN -> TSC_WAKE */
+		wake-gpios = <&pca9554_1 4 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&reg_3p3v>;
+		vcc-supply = <&reg_3p3v>;
+		gain = <20>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&panel_in {
+	remote-endpoint = <&dcu_out>;
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts
new file mode 100644
index 000000000000..5606585dd560
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+#include "ls1021a-tqmls1021a.dtsi"
+
+/ {
+	model = "TQMLS102xA SOM on MBLS102xA";
+	compatible = "tq,ls1021a-tqmls1021a-mbls102xa", "tq,ls1021a-tqmls1021a", "fsl,ls1021a";
+
+	audio_mclk: audio-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	backlight_dcu: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&pca9530 0 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-1 {
+			label = "S6";
+			linux,code = <BTN_0>;
+			gpios = <&pca9554_0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		btn2: switch-2 {
+			label = "S7";
+			linux,code = <BTN_1>;
+			gpios = <&pca9554_0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-3 {
+			label = "S8";
+			linux,code = <BTN_2>;
+			gpios = <&pca9554_0 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <0>;
+			gpios = <&pca9554_2 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&pca9554_2 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&pca9554_2 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <0>;
+			gpios = <&pca9554_2 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	lvds_encoder: lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+		power-supply = <&reg_3p3v>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_in: endpoint {};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_out: endpoint {};
+			};
+		};
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&reg_3p3v>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	hdmi_out: hdmi {
+		compatible = "hdmi-connector";
+		type = "a";
+		ddc-i2c-bus = <&i2c0>;
+		status = "disabled";
+
+		port {
+			hdmi_in: endpoint {
+				remote-endpoint = <&sii9022a_out>;
+			};
+		};
+	};
+
+	display: panel {
+		backlight = <&backlight_dcu>;
+		enable-gpios = <&pca9554_1 3 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3p3v>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		ssi-controller = <&sai1>;
+		audio-codec = <&tlv320aic32x4>;
+	};
+
+};
+
+&can0 {
+	xceiver-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&can1 {
+	xceiver-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&dspi0 {
+	status = "okay";
+};
+
+&enet0 {
+	phy-handle = <&rgmii_phy0c>;
+	phy-mode = "rgmii-id";
+	mac-address = [ 00 00 00 00 00 00 ];
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy03>;
+	phy-mode = "sgmii";
+	mac-address = [ 00 00 00 00 00 00 ];
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy04>;
+	phy-mode = "rgmii-id";
+	mac-address = [ 00 00 00 00 00 00 ];
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&audio_mclk>;
+		clock-names = "mclk";
+		ldoin-supply = <&reg_3p3v>;
+		iov-supply = <&reg_3p3v>;
+	};
+
+	pca9554_0: gpio-expander@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_3p3v>;
+		gpio-line-names = "BUTTON0", "BUTTON1",
+				  "BUTTON2", "EMMC_SEL",
+				  "DIP2", "DIP3",
+				  "EXT_TOUCH_INT", "GPIO_1";
+	};
+
+	pca9554_1: gpio-expander@21 {
+		compatible = "nxp,pca9554";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_3p3v>;
+		gpio-line-names = "PCIE_PWR_EN", "MPCIE_DISABLE#",
+				  "MPCIE_WAKE#", "LCD_BLT_EN",
+				  "LCD_PWR_EN", "EC1_PHY_PWDN",
+				  "EC3_PHY_PWDN", "SGMII_PHY_PWDN";
+	};
+
+	pca9554_2: gpio-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&extirq>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_3p3v>;
+		gpio-line-names = "MUX_SEL0", "MUX_SEL1",
+				  "MUX_SEL2", "MUX_SEL3",
+				  "V95", "V96", "V97", "V98";
+	};
+
+	sii9022a: hdmi-transmitter@3b {
+		compatible = "sil,sii9022";
+		reg = <0x3b>;
+		iovcc-supply = <&reg_3p3v>;
+		cvcc12-supply = <&reg_1p2v>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>;
+		#sound-dai-cells = <0>;
+		sil,i2s-data-lanes = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022a_in: endpoint {};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022a_out: endpoint {
+					remote-endpoint = <&hdmi_in>;
+				};
+			};
+		};
+	};
+
+	stmpe811: port-expander@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&reg_3p3v>;
+		vio-supply = <&reg_3p3v>;
+
+		gpio {
+			compatible = "st,stmpe-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			/* GPIO 5-7 used for touch */
+			st,norequest-mask = <0xf0>;
+			gpio-line-names = "GPIO_ADC_I2C1_1",
+					  "GPIO_ADC_I2C1_2",
+					  "GPIO_ADC_I2C1_3",
+					  "GPIO_ADC_I2C1_4";
+		};
+
+		touchscreen {
+			compatible = "st,stmpe-ts";
+			status = "disabled";
+		};
+	};
+
+	pca9530: leds@60 {
+		compatible = "nxp,pca9530";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "PWM_0", "PWM_1";
+
+		led-0 {
+			type = <PCA9532_TYPE_GPIO>;
+		};
+
+		led-1 {
+			type = <PCA9532_TYPE_GPIO>;
+		};
+	};
+
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&lpuart0 {
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&mdio0 {
+	sgmii_phy03: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x03>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+
+	rgmii_phy04: ethernet-phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x04>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	rgmii_phy0c: ethernet-phy@c {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0c>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&pwm6 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&sai1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb3 {
+	/*
+	 * Although DR connector, VBUS is always driven, so
+	 * restrict to host mode.
+	 */
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi
new file mode 100644
index 000000000000..167559521ae1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "ls1021a.dtsi"
+
+/ {
+	model = "TQMLS102xA SOM";
+	compatible = "tq,ls1021a-tqmls1021a", "fsl,ls1021a";
+
+	reg_3p3v_som: regulator-3p3v-som {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V_SOM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&esdhc {
+	/* e-MMC over 8 data lines */
+	bus-width = <8>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* MC34VR500 DC/DC regulator at 0x8, managed by PMIC */
+	/* On-board PMC at 0x11 */
+
+	sa56004: temperature-sensor@4c {
+		compatible = "nxp,sa56004";
+		reg = <0x4c>;
+		vcc-supply = <&reg_3p3v_som>;
+	};
+
+	rtc0: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
+	};
+
+	m24c64_54: eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+		read-only;
+		vcc-supply = <&reg_3p3v_som>;
+	};
+};
+
+&mdio0 {
+	tbi1: tbi-phy@8 {
+		reg = <0x8>;
+		device_type = "tbi-phy";
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	qflash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <0>;
+		vcc-supply = <&reg_3p3v_som>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uboot@0 {
+				label = "U-Boot-PBL";
+				reg = <0x0 0xe0000>;
+			};
+
+			env@e0000 {
+				label = "U-Boot Environment";
+				reg = <0xe0000 0x10000>;
+			};
+
+			dtb@f0000 {
+				label = "DTB";
+				reg = <0xf0000 0x10000>;
+			};
+
+			linux@100000 {
+				label = "Linux";
+				reg = <0x100000 0x700000>;
+			};
+
+			rootfs@800000 {
+				label = "RootFS";
+				reg = <0x800000 0x3800000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts
index 1ea32fff4120..da76566f3510 100644
--- a/arch/arm/boot/dts/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts
@@ -40,8 +40,6 @@
 	/* ADG704BRMZ 1:4 SPI mux/demux */
 	sja1105: ethernet-switch@1 {
 		reg = <0x1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		compatible = "nxp,sja1105t";
 		/* 12 MHz */
 		spi-max-frequency = <12000000>;
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts
index f5c03871b205..38281b904301 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts
@@ -151,7 +151,7 @@
 	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
index fa761620f073..e0b9ea6dd510 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
@@ -93,10 +93,9 @@
 			compatible = "fsl,qoriq-memory-controller";
 			reg = <0x0 0x1080000 0x0 0x1000>;
 			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-			big-endian;
 		};
 
-		gic: interrupt-controller@1400000 {
+		gic: interrupt-controller@1401000 {
 			compatible = "arm,gic-400", "arm,cortex-a7-gic";
 			#interrupt-cells = <3>;
 			interrupt-controller;
@@ -112,7 +111,7 @@
 			compatible = "fsl,ls1021a-msi";
 			reg = <0x0 0x1570e00 0x0 0x8>;
 			msi-controller;
-			interrupts =  <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		msi2: msi-controller@1570e08 {
@@ -155,14 +154,13 @@
 			status = "disabled";
 		};
 
-		esdhc: esdhc@1560000 {
+		esdhc: mmc@1560000 {
 			compatible = "fsl,ls1021a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
-			big-endian;
 			bus-width = <4>;
 			status = "disabled";
 		};
@@ -611,11 +609,10 @@
 		};
 
 		wdog0: watchdog@2ad0000 {
-			compatible = "fsl,imx21-wdt";
+			compatible = "fsl,ls1021a-wdt", "fsl,imx21-wdt";
 			reg = <0x0 0x2ad0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
-			clock-names = "wdog-en";
 			big-endian;
 		};
 
@@ -627,9 +624,9 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
 				 <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 47>,
-			       <&edma0 1 46>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 46>,
+			       <&edma0 1 47>;
 			status = "disabled";
 		};
 
@@ -641,13 +638,13 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
 				 <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 45>,
-			       <&edma0 1 44>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 44>,
+			       <&edma0 1 45>;
 			status = "disabled";
 		};
 
-		edma0: edma@2c00000 {
+		edma0: dma-controller@2c00000 {
 			#dma-cells = <2>;
 			compatible = "fsl,vf610-edma";
 			reg = <0x0 0x2c00000 0x0 0x10000>,
@@ -707,6 +704,7 @@
 
 		enet0: ethernet@2d10000 {
 			compatible = "fsl,etsec2";
+			reg = <0x0 0x2d10000 0x0 0x5000>;
 			device_type = "network";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -717,8 +715,6 @@
 			dma-coherent;
 
 			queue-group@2d10000 {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d10000 0x0 0x1000>;
 				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
@@ -726,8 +722,6 @@
 			};
 
 			queue-group@2d14000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d14000 0x0 0x1000>;
 				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
@@ -737,6 +731,7 @@
 
 		enet1: ethernet@2d50000 {
 			compatible = "fsl,etsec2";
+			reg = <0x0 0x2d50000 0x0 0x5000>;
 			device_type = "network";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -746,8 +741,6 @@
 			dma-coherent;
 
 			queue-group@2d50000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d50000 0x0 0x1000>;
 				interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
@@ -755,8 +748,6 @@
 			};
 
 			queue-group@2d54000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d54000 0x0 0x1000>;
 				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
@@ -766,6 +757,7 @@
 
 		enet2: ethernet@2d90000 {
 			compatible = "fsl,etsec2";
+			reg = <0x0 0x2d90000 0x0 0x5000>;
 			device_type = "network";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -775,8 +767,6 @@
 			dma-coherent;
 
 			queue-group@2d90000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d90000 0x0 0x1000>;
 				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
@@ -784,8 +774,6 @@
 			};
 
 			queue-group@2d94000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d94000 0x0 0x1000>;
 				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
@@ -808,6 +796,7 @@
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
+			usb3-lpm-capable;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 		};
 
@@ -866,6 +855,7 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "ipg", "per";
 			big-endian;
+			status = "disabled";
 		};
 
 		can1: can@2a80000 {
@@ -875,6 +865,7 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "ipg", "per";
 			big-endian;
+			status = "disabled";
 		};
 
 		can2: can@2a90000 {
@@ -884,6 +875,7 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "ipg", "per";
 			big-endian;
+			status = "disabled";
 		};
 
 		can3: can@2aa0000 {
@@ -893,6 +885,7 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "ipg", "per";
 			big-endian;
+			status = "disabled";
 		};
 
 		ocram1: sram@10000000 {
@@ -911,7 +904,7 @@
 			ranges = <0x0 0x0 0x10010000 0x10000>;
 		};
 
-		qdma: dma-controller@8390000 {
+		qdma: dma-controller@8388000 {
 			compatible = "fsl,ls1021a-qdma";
 			reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
 			      <0x0 0x8389000 0x0 0x1000>, /* Status regs */
@@ -931,17 +924,15 @@
 			big-endian;
 		};
 
-		rcpm: power-controller@1ee2140 {
+		rcpm: wakeup-controller@1ee2140 {
 			compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1ee2140 0x0 0x8>;
 			#fsl,rcpm-wakeup-cells = <2>;
-			#power-domain-cells = <0>;
 		};
 
-		ftm_alarm0: timer0@29d0000 {
+		ftm_alarm0: rtc@29d0000 {
 			compatible = "fsl,ls1021a-ftm-alarm";
 			reg = <0x0 0x29d0000 0x0 0x10000>;
-			reg-names = "ftm";
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>;
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			big-endian;
diff --git a/arch/arm/boot/dts/nxp/mxs/Makefile b/arch/arm/boot/dts/nxp/mxs/Makefile
new file mode 100644
index 000000000000..d72ba702b6fa
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/Makefile
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MXS) += \
+	imx23-evk.dtb \
+	imx23-olinuxino.dtb \
+	imx23-sansa.dtb \
+	imx23-stmp378x_devb.dtb \
+	imx23-xfi3.dtb \
+	imx28-amarula-rmm.dtb \
+	imx28-apf28.dtb \
+	imx28-apf28dev.dtb \
+	imx28-apx4devkit.dtb \
+	imx28-btt3-0.dtb \
+	imx28-btt3-1.dtb \
+	imx28-btt3-2.dtb \
+	imx28-cfa10036.dtb \
+	imx28-cfa10037.dtb \
+	imx28-cfa10049.dtb \
+	imx28-cfa10055.dtb \
+	imx28-cfa10056.dtb \
+	imx28-cfa10057.dtb \
+	imx28-cfa10058.dtb \
+	imx28-duckbill-2-485.dtb \
+	imx28-duckbill-2.dtb \
+	imx28-duckbill-2-enocean.dtb \
+	imx28-duckbill-2-spi.dtb \
+	imx28-duckbill.dtb \
+	imx28-eukrea-mbmx283lc.dtb \
+	imx28-eukrea-mbmx287lc.dtb \
+	imx28-evk.dtb \
+	imx28-m28cu3.dtb \
+	imx28-m28evk.dtb \
+	imx28-sps1.dtb \
+	imx28-ts4600.dtb \
+	imx28-tx28.dtb \
+	imx28-xea.dtb
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts
index 3b609d987d88..33b36af1656f 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts
@@ -52,7 +52,7 @@
 	};
 
 	apb@80000000 {
-		apbh@80000000 {
+		apbh-bus@80000000 {
 			nand-controller@8000c000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
@@ -99,7 +99,7 @@
 			};
 		};
 
-		apbx@80040000 {
+		apbx-bus@80040000 {
 			lradc@80050000 {
 				status = "okay";
 				fsl,lradc-touchscreen-wires = <4>;
@@ -137,7 +137,7 @@
 
 	backlight_display: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
+		pwms = <&pwm 2 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 	};
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts
index 0729e72f2283..e372e9327a47 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts
@@ -19,7 +19,7 @@
 	};
 
 	apb@80000000 {
-		apbh@80000000 {
+		apbh-bus@80000000 {
 			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
@@ -64,7 +64,7 @@
 			};
 		};
 
-		apbx@80040000 {
+		apbx-bus@80040000 {
 			lradc@80050000 {
 				status = "okay";
 			};
@@ -101,21 +101,14 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
-			gpio = <&gpio0 17 0>;
-		};
+	reg_usb0_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
+		gpio = <&gpio0 17 0>;
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/imx23-pinfunc.h b/arch/arm/boot/dts/nxp/mxs/imx23-pinfunc.h
index 468c079f3c2b..468c079f3c2b 100644
--- a/arch/arm/boot/dts/imx23-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-pinfunc.h
diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
index 46057d9bf555..613f13b6c8a8 100644
--- a/arch/arm/boot/dts/imx23-sansa.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
@@ -55,7 +55,7 @@
 	};
 
 	apb@80000000 {
-		apbh@80000000 {
+		apbh-bus@80000000 {
 			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
@@ -93,14 +93,14 @@
 						MX23_PAD_LCD_HSYNC__GPIO_1_24
 						MX23_PAD_PWM3__GPIO_1_29
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 		};
 
-		apbx@80040000 {
+		apbx-bus@80040000 {
 			pwm: pwm@80064000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pwm2_pins_a>;
@@ -166,7 +166,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
+		pwms = <&pwm 2 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 	};
@@ -175,10 +175,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio1 24 0		/* SDA */
-			&gpio1 22 0		/* SCL */
-		>;
+		sda-gpios = <&gpio1 24 0>;
+		scl-gpios = <&gpio1 22 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	};
 
@@ -186,10 +184,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio0 31 0		/* SDA */
-			&gpio0 30 0		/* SCL */
-		>;
+		sda-gpios = <&gpio0 31 0>;
+		scl-gpios = <&gpio0 30 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 
 		touch: touch@20 {
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts
index da4b88f32eaa..b2b6f8514999 100644
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts
@@ -16,7 +16,7 @@
 	};
 
 	apb@80000000 {
-		apbh@80000000 {
+		apbh-bus@80000000 {
 			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
@@ -44,7 +44,7 @@
 			};
 		};
 
-		apbx@80040000 {
+		apbx-bus@80040000 {
 			auart0: serial@8006c000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&auart0_pins_a>;
@@ -59,18 +59,11 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_vddio_sd0: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 29 0>;
-		};
+	reg_vddio_sd0: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 29 0>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts
index a6213c590f94..fad08f6c008f 100644
--- a/arch/arm/boot/dts/imx23-xfi3.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts
@@ -54,7 +54,7 @@
 	};
 
 	apb@80000000 {
-		apbh@80000000 {
+		apbh-bus@80000000 {
 			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
@@ -83,9 +83,9 @@
 					fsl,pinmux-ids = <
 						MX23_PAD_GPMI_D07__GPIO_0_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				key_pins_a: keys@0 {
@@ -94,14 +94,14 @@
 						MX23_PAD_ROTARYA__GPIO_2_7
 						MX23_PAD_ROTARYB__GPIO_2_8
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 		};
 
-		apbx@80040000 {
+		apbx-bus@80040000 {
 			i2c: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c_pins_a>;
@@ -153,24 +153,24 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
+		pwms = <&pwm 2 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&key_pins_a>;
 
-		voldown {
+		key-voldown {
 			label = "volume-down";
 			linux,code = <114>;
 			gpios = <&gpio2 7 0>;
 			debounce-interval = <20>;
 		};
 
-		volup {
+		key-volup {
 			label = "volume-up";
 			linux,code = <115>;
 			gpios = <&gpio2 8 0>;
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
index 7f4c602454a5..5e21252fb7c9 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
@@ -45,7 +45,7 @@
 		reg = <0x80000000 0x80000>;
 		ranges;
 
-		apbh@80000000 {
+		apbh-bus@80000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -59,13 +59,11 @@
 				reg = <0x80000000 0x2000>;
 			};
 
-			dma_apbh: dma-apbh@80004000 {
+			dma_apbh: dma-controller@80004000 {
 				compatible = "fsl,imx23-dma-apbh";
 				reg = <0x80004000 0x2000>;
-				interrupts = <0 14 20 0
-					      13 13 13 13>;
-				interrupt-names = "empty", "ssp0", "ssp1", "empty",
-						  "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+				interrupts = <0>, <14>, <20>, <0>,
+					     <13>, <13>, <13>, <13>;
 				#dma-cells = <1>;
 				dma-channels = <8>;
 				clocks = <&clks 15>;
@@ -112,7 +110,7 @@
 				reg = <0x80018000 0x2000>;
 
 				gpio0: gpio@0 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx23-gpio";
 					reg = <0>;
 					interrupts = <16>;
 					gpio-controller;
@@ -122,7 +120,7 @@
 				};
 
 				gpio1: gpio@1 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx23-gpio";
 					reg = <1>;
 					interrupts = <17>;
 					gpio-controller;
@@ -132,7 +130,7 @@
 				};
 
 				gpio2: gpio@2 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx23-gpio";
 					reg = <2>;
 					interrupts = <18>;
 					gpio-controller;
@@ -414,13 +412,13 @@
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx23-dma-apbx";
 				reg = <0x80024000 0x2000>;
-				interrupts = <7 5 9 26
-					      19 0 25 23
-					      60 58 9 0
-					      0 0 0 0>;
+				interrupts = <7>, <5>, <9>, <26>,
+					     <19>, <0>, <25>, <23>,
+					     <60>, <58>, <9>, <0>,
+					     <0>, <0>, <0>, <0>;
 				interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c",
 						  "saif0", "empty", "auart0-rx", "auart0-tx",
 						  "auart1-rx", "auart1-tx", "saif1", "empty",
@@ -433,7 +431,7 @@
 			dcp: crypto@80028000 {
 				compatible = "fsl,imx23-dcp";
 				reg = <0x80028000 0x2000>;
-				interrupts = <53 54>;
+				interrupts = <53>, <54>;
 				status = "okay";
 			};
 
@@ -458,7 +456,7 @@
 			lcdif@80030000 {
 				compatible = "fsl,imx23-lcdif";
 				reg = <0x80030000 2000>;
-				interrupts = <46 45>;
+				interrupts = <46>, <45>;
 				clocks = <&clks 38>;
 				status = "disabled";
 			};
@@ -478,7 +476,7 @@
 			};
 		};
 
-		apbx@80040000 {
+		apbx-bus@80040000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -486,7 +484,7 @@
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
+				compatible = "fsl,imx23-clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
@@ -527,7 +525,8 @@
 			lradc: lradc@80050000 {
 				compatible = "fsl,imx23-lradc";
 				reg = <0x80050000 0x2000>;
-				interrupts = <36 37 38 39 40 41 42 43 44>;
+				interrupts = <36>, <37>, <38>, <39>, <40>,
+					     <41>, <42>, <43>, <44>;
 				status = "disabled";
 				clocks = <&clks 26>;
 				#io-channel-cells = <1>;
@@ -562,7 +561,7 @@
 				compatible = "fsl,imx23-pwm";
 				reg = <0x80064000 0x2000>;
 				clocks = <&clks 30>;
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				fsl,pwm-number = <5>;
 				status = "disabled";
 			};
@@ -570,7 +569,7 @@
 			timrot@80068000 {
 				compatible = "fsl,imx23-timrot", "fsl,timrot";
 				reg = <0x80068000 0x2000>;
-				interrupts = <28 29 30 31>;
+				interrupts = <28>, <29>, <30>, <31>;
 				clocks = <&clks 28>;
 			};
 
@@ -599,7 +598,7 @@
 				reg = <0x80070000 0x2000>;
 				interrupts = <0>;
 				clocks = <&clks 32>, <&clks 16>;
-				clock-names = "uart", "apb_pclk";
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts b/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts
new file mode 100644
index 000000000000..af59211842fb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "amarula,imx28-rmm", "fsl,imx28";
+	model = "Amarula i.MX28 rmm";
+
+	memory@40000000 {
+		reg = <0x40000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 5000000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <255>;
+		power-supply = <&reg_5v>;
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm 7 100000 0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		led-0 {
+			gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_fec_3v3: regulator-fec-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&fec_3v3_enable_pin>;
+		regulator-name = "fec-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <300000>;
+		vin-supply = <&reg_5v>;
+	};
+
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_vbus_enable_pin>;
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_vbus_enable_pin>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_pins_a>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_b>;
+	status = "okay";
+};
+
+&duart_pins_b {
+	fsl,voltage = <MXS_VOLTAGE_LOW>;
+};
+
+&gpmi {
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	touchscreen: touchscreen@38 {
+		compatible = "edt,edt-ft5306";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edt_ft5x06_pins &edt_ft5x06_wake_pin>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&lradc {
+	status = "okay";
+};
+
+&mac0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_fec_3v3>;
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			max-speed = <100>;
+			reset-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <4000>;
+			reset-deassert-us = <4000>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	edt_ft5x06_pins: edt-ft5x06@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDY1__GPIO_0_21 /* Reset */
+			MX28_PAD_GPMI_CE3N__GPIO_0_19 /* Interrupt */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	edt_ft5x06_wake_pin: edt-ft5x06-wake@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <MX28_PAD_GPMI_CE2N__GPIO_0_18>;
+		fsl,drive-strength = <MXS_DRIVE_16mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	fec_3v3_enable_pin: fec-3v3-enable@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <MX28_PAD_SPDIF__GPIO_3_27>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS1__GPIO_2_20  /* External power */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	leds_pins: leds@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__GPIO_2_7
+			MX28_PAD_PWM0__GPIO_3_16
+			MX28_PAD_PWM1__GPIO_3_17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	usb0_vbus_enable_pin: usb0-vbus-enable@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <MX28_PAD_SSP0_DATA5__GPIO_2_5>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	usb1_vbus_enable_pin: usb1-vbus-enable@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <MX28_PAD_SSP0_DATA6__GPIO_2_6>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a &pwm7_pins_a>;
+	status = "okay";
+};
+
+/* microSD */
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
+	broken-cd;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-apf28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-apf28.dts
new file mode 100644
index 000000000000..98672932e41b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-apf28.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "Armadeus Systems APF28 module";
+	compatible = "armadeus,imx28-apf28", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0 0x300000>;
+	};
+
+	partition@300000 {
+		label = "env";
+		reg = <0x300000 0x80000>;
+	};
+
+	partition@380000 {
+		label = "env2";
+		reg = <0x380000 0x80000>;
+	};
+
+	partition@400000 {
+		label = "dtb";
+		reg = <0x400000 0x80000>;
+	};
+
+	partition@480000 {
+		label = "splash";
+		reg = <0x480000 0x80000>;
+	};
+
+	partition@500000 {
+		label = "kernel";
+		reg = <0x500000 0x800000>;
+	};
+
+	partition@d00000 {
+		label = "rootfs";
+		reg = <0xd00000 0xf300000>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts b/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts
new file mode 100644
index 000000000000..6c87266eb135
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ */
+
+/* APF28Dev is a docking board for the APF28 SOM */
+#include "imx28-apf28.dts"
+
+/ {
+	model = "Armadeus Systems APF28Dev docking/development board";
+	compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
+
+	reg_usb0_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 23 1>;
+		enable-active-high;
+	};
+
+	reg_can0_vcc: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "can0_vcc";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio0 21 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+
+		pwms = <&pwm 3 191000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-button {
+			label = "User button";
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can0_vcc>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_16bit_pins_a
+		     &lcdif_pins_apf28dev>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <16>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_apf28dev>;
+
+	hog_pins_apf28dev: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D16__GPIO_1_16
+			MX28_PAD_LCD_D17__GPIO_1_17
+			MX28_PAD_LCD_D18__GPIO_1_18
+			MX28_PAD_LCD_D19__GPIO_1_19
+			MX28_PAD_LCD_D20__GPIO_1_20
+			MX28_PAD_LCD_D21__GPIO_1_21
+			MX28_PAD_LCD_D22__GPIO_1_22
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_apf28dev: lcdif-apf28dev@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	usb0_otg_apf28dev: otg-apf28dev@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D23__GPIO_1_23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_otg_apf28dev
+		     &usb0_id_pins_b>;
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts b/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts
new file mode 100644
index 000000000000..0d845ca81e89
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "Bluegiga APX4 Development Kit";
+	compatible = "bluegiga,apx4devkit", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x04000000>;
+	};
+
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "bluegiga,apx4devkit-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "apx4devkit-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio3 28 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	status = "okay";
+};
+
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_2pins_a>;
+	status = "okay";
+};
+
+&auart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart2_2pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_apx4>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hfront-porch = <40>;
+				vback-porch = <32>;
+				vfront-porch = <13>;
+				hsync-len = <48>;
+				vsync-len = <3>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_RDY1__GPIO_0_21
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
+			MX28_PAD_PWM3__GPIO_3_28
+			MX28_PAD_LCD_RESET__GPIO_3_30
+			MX28_PAD_JTAG_RTCK__GPIO_4_20
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_apx4: lcdif-apx4@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA4__SSP2_D0
+			MX28_PAD_SSP0_DATA5__SSP2_D3
+			MX28_PAD_SSP0_DATA6__SSP2_CMD
+			MX28_PAD_SSP0_DATA7__SSP2_SCK
+			MX28_PAD_SSP2_SS1__SSP2_D1
+			MX28_PAD_SSP2_SS2__SSP2_D2
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__SSP2_SCK
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usb1 {
+      status = "okay";
+};
+
+&usbphy1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dts b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dts
new file mode 100644
index 000000000000..6ac46e4b21bb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28-btt3.dtsi"
+
+&hog_pins_rev {
+	fsl,pull-up = <MXS_PULL_ENABLE>;
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3-1.dts b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-1.dts
new file mode 100644
index 000000000000..213fe931c58b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28-btt3.dtsi"
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3-2.dts b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-2.dts
new file mode 100644
index 000000000000..4bccd784d065
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-2.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28-btt3.dtsi"
+
+/ {
+	panel {
+		compatible = "powertip,st7272", "panel-dpi";
+		power-supply = <&reg_3v3>;
+		width-mm = <70>;
+		height-mm = <52>;
+
+		panel-timing {
+			clock-frequency = <6500000>;
+			hactive = <320>;
+			vactive = <240>;
+			hfront-porch = <20>;
+			hback-porch = <68>;
+			hsync-len = <30>;
+			vfront-porch = <4>;
+			vback-porch = <14>;
+			vsync-len = <4>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi
new file mode 100644
index 000000000000..a6903ef2b093
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+/dts-v1/;
+#include "imx28-lwe.dtsi"
+
+/ {
+	model = "BTT3";
+
+	compatible = "lwn,imx28-btt3", "fsl,imx28";
+
+	chosen {
+	       bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro rootwait console=ttyAMA0,115200 panic=1 quiet";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x10000000>;
+		device_type = "memory";
+	};
+
+	panel {
+		compatible = "powertip,hx8238a", "panel-dpi";
+		power-supply = <&reg_3v3>;
+		width-mm = <70>;
+		height-mm = <52>;
+
+		panel-timing {
+			clock-frequency = <6500000>;
+			hactive = <320>;
+			vactive = <240>;
+			hfront-porch = <20>;
+			hback-porch = <38>;
+			hsync-len = <30>;
+			vfront-porch = <4>;
+			vback-porch = <14>;
+			vsync-len = <4>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <0>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "BTTC Audio";
+		simple-audio-card,widgets = "Speaker", "BTTC Speaker";
+		simple-audio-card,routing = "BTTC Speaker", "SPKOUTN", "BTTC Speaker", "SPKOUTP";
+
+		simple-audio-card,dai-link@0 {
+			format = "left_j";
+			bitclock-master = <&dai0_master>;
+			frame-master = <&dai0_master>;
+			mclk-fs = <256>;
+
+			dai0_master: cpu {
+				sound-dai = <&saif0>;
+			};
+
+			codec {
+				sound-dai = <&wm89xx>;
+				clocks = <&saif0>;
+			};
+		};
+	};
+
+	wifi_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_en_pin_bttc>;
+		reset-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		/* W1-163 needs 60us for WL_EN to be low and */
+		/* 150ms after high before downloading FW is possible */
+		post-power-on-delay-ms = <200>;
+		power-off-delay-us = <100>;
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&i2c0 {
+	wm89xx: audio-codec@1a {
+		compatible = "wlf,wm8940";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a>, <&lcdif_sync_pins_bttc>,
+		    <&lcdif_reset_pins_bttc>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&mac0 {
+	clocks = <&clks 57>, <&clks 57>, <&clks 64>;
+	clock-names = "ipg", "ahb", "enet_out";
+	phy-handle = <&mac0_phy>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_3v3>;
+	/*
+	 * This MAC address is adjusted during production.
+	 * Value specified below is used as a fallback during recovery.
+	 */
+	local-mac-address = [ 00 11 B8 00 BF 8A ];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mac0_phy: ethernet-phy@0 {
+			/* LAN8720Ai - PHY ID */
+			compatible = "ethernet-phy-id0007.c0f0","ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			smsc,disable-energy-detect;
+			max-speed = <100>;
+			reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>, <&hog_pins_rev>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDY2__GPIO_0_22
+			MX28_PAD_GPMI_RDY3__GPIO_0_23
+			MX28_PAD_GPMI_RDN__GPIO_0_24
+			MX28_PAD_LCD_VSYNC__GPIO_1_28
+			MX28_PAD_SSP2_SS1__GPIO_2_20
+			MX28_PAD_SSP2_SS2__GPIO_2_21
+			MX28_PAD_AUART2_CTS__GPIO_3_10
+			MX28_PAD_AUART2_RTS__GPIO_3_11
+			MX28_PAD_GPMI_WRN__GPIO_0_25
+			MX28_PAD_ENET0_RXD2__GPIO_4_9
+			MX28_PAD_ENET0_TXD2__GPIO_4_11
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	hog_pins_rev: hog@1 {
+		reg = <1>;
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_RXD3__GPIO_4_10
+			MX28_PAD_ENET0_TX_CLK__GPIO_4_5
+			MX28_PAD_ENET0_COL__GPIO_4_14
+			MX28_PAD_ENET0_CRS__GPIO_4_15
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	keypad_pins_bttc: keypad-bttc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D00__GPIO_0_0
+			MX28_PAD_AUART0_CTS__GPIO_3_2
+			MX28_PAD_AUART0_RTS__GPIO_3_3
+			MX28_PAD_GPMI_D03__GPIO_0_3
+			MX28_PAD_GPMI_D04__GPIO_0_4
+			MX28_PAD_GPMI_D05__GPIO_0_5
+			MX28_PAD_GPMI_D06__GPIO_0_6
+			MX28_PAD_GPMI_D07__GPIO_0_7
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_CE2N__GPIO_0_18
+			MX28_PAD_GPMI_CE3N__GPIO_0_19
+			MX28_PAD_GPMI_RDY0__GPIO_0_20
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_sync_pins_bttc: lcdif-bttc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_ENABLE__LCD_ENABLE
+			MX28_PAD_LCD_HSYNC__LCD_HSYNC
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_reset_pins_bttc: lcdif-bttc@1 {
+		reg = <1>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	ssp1_sdio_pins_a: ssp1-sdio@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP1_DATA0__SSP1_D0
+			MX28_PAD_GPMI_D01__SSP1_D1
+			MX28_PAD_GPMI_D02__SSP1_D2
+			MX28_PAD_SSP1_DATA3__SSP1_D3
+			MX28_PAD_SSP1_CMD__SSP1_CMD
+			MX28_PAD_SSP1_SCK__SSP1_SCK
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	wifi_en_pin_bttc: wifi-en-pin@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CLE__GPIO_0_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_a>;
+	status = "okay";
+};
+
+&reg_usb_5v {
+	gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clks 53>;
+	assigned-clock-rates = <12000000>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	#sound-dai-cells = <0>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp1 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssp1_sdio_pins_a>;
+	bus-width = <4>;
+	no-1-8-v;       /* force 3.3V VIO */
+	non-removable;
+	vmmc-supply = <&reg_3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	keep-power-in-suspend;
+	status = "okay";
+
+	wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts
new file mode 100644
index 000000000000..f170df37b3f8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Free Electrons
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Crystalfontz CFA-10036 Board";
+	compatible = "crystalfontz,cfa10036", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cfa10036>;
+
+		power {
+			gpios = <&gpio3 4 1>;
+			default-state = "on";
+		};
+	};
+
+	reg_vddio_sd0: vddio-sd0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc_pwr_cfa10036>;
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 28 0>;
+	};
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_b>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_b>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ssd1306: oled@3c {
+		compatible = "solomon,ssd1306fb-i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ssd1306_cfa10036>;
+		reg = <0x3c>;
+		reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+		solomon,height = <32>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,com-lrremap;
+		solomon,com-invdir;
+		solomon,com-offset = <32>;
+	};
+};
+
+&pinctrl {
+	ssd1306_cfa10036: ssd1306-10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__GPIO_2_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins_cfa10036: leds-10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART1_RX__GPIO_3_4
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	usb0_otg_cfa10036: otg-10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDY0__USB0_ID
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			0x31c3 /*
+			MX28_PAD_PWM3__GPIO_3_28 */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_otg_cfa10036>;
+	dr_mode = "peripheral";
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts
index d3e9a731525b..fd177daa6385 100644
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts
@@ -14,7 +14,7 @@
 	compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
 
 	apb@80000000 {
-		apbh@80000000 {
+		apbh-bus@80000000 {
 			pinctrl@80018000 {
 				usb_pins_cfa10037: usb-10037@0 {
 					reg = <0>;
@@ -38,7 +38,7 @@
 			};
 		};
 
-		apbx@80040000 {
+		apbx-bus@80040000 {
 			usbphy1: usbphy@8007e000 {
 				status = "okay";
 			};
@@ -64,20 +64,13 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10037>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
+	reg_usb1_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_pins_cfa10037>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio0 7 1>;
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts
new file mode 100644
index 000000000000..f0ce897b9d5c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts
@@ -0,0 +1,411 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Free Electrons
+ */
+
+/*
+ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10049 Board";
+	compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2cmux_pins_cfa10049>;
+		mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
+		i2c-parent = <&i2c1>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adc0: nau7802@2a {
+				compatible = "nuvoton,nau7802";
+				reg = <0x2a>;
+				nuvoton,vldo = <3000>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			adc1: nau7802@2a {
+				compatible = "nuvoton,nau7802";
+				reg = <0x2a>;
+				nuvoton,vldo = <3000>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+				adc2: nau7802@2a {
+				compatible = "nuvoton,nau7802";
+				reg = <0x2a>;
+				nuvoton,vldo = <3000>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pca9555: pca9555@20 {
+				compatible = "nxp,pca9555";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pca_pins_cfa10049>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <19 0x2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x20>;
+			};
+		};
+	};
+
+	reg_usb1_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_pins_cfa10049>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio0 7 1>;
+	};
+
+	spi-2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10049>;
+		status = "okay";
+		sck-gpios = <&gpio2 16 0>;
+		mosi-gpios = <&gpio2 17 0>;
+		miso-gpios = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8357: hx8357@0 {
+			compatible = "himax,hx8357b", "himax,hx8357";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+			im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>;
+		};
+	};
+
+	spi-3 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi3_pins_cfa10049>;
+		status = "okay";
+		sck-gpios = <&gpio0 24 0>;
+		mosi-gpios = <&gpio0 28 0>;
+		cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>;
+		num-chipselects = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio5: gpio5@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <2>;
+			spi-max-frequency = <100000>;
+		};
+
+		gpio6: gpio6@1 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <1>;
+			registers-number = <4>;
+			spi-max-frequency = <100000>;
+		};
+
+		dac0: dh2228@2 {
+			compatible = "rohm,dh2228fv";
+			reg = <2>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rotary_btn_pins_cfa10049>;
+
+		rotary-button {
+			label = "rotary_button";
+			gpios = <&gpio3 26 1>;
+			debounce-interval = <10>;
+			linux,code = <28>;
+		};
+	};
+
+	rotary {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rotary_pins_cfa10049>;
+		gpios = <&gpio3 24 1>, <&gpio3 25 1>;
+		linux,axis = <1>; /* REL_Y */
+		rotary-encoder,relative-axis;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&w1_gpio_pins>;
+		status = "okay";
+		gpios = <&gpio1 21 0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_cfa10049
+		     &lcdif_pins_cfa10049
+		     &lcdif_pins_cfa10049_pullup>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9216000>;
+				hactive = <320>;
+				vactive = <480>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vfront-porch = <2>;
+				hsync-len = <15>;
+				vsync-len = <15>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a
+		&mac0_pins_cfa10049>;
+	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_pins_cfa10049: usb-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	i2cmux_pins_cfa10049: i2cmux-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D22__GPIO_1_22
+			MX28_PAD_LCD_D23__GPIO_1_23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_pins_cfa10049: mac0-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS2__GPIO_2_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	pca_pins_cfa10049: pca-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS0__GPIO_2_19
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	rotary_pins_cfa10049: rotary-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_I2C0_SCL__GPIO_3_24
+			MX28_PAD_I2C0_SDA__GPIO_3_25
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF1_SDATA0__GPIO_3_26
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	spi2_pins_cfa10049: spi2-cfa10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SCK__GPIO_2_16
+			MX28_PAD_SSP2_MOSI__GPIO_2_17
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	spi3_pins_cfa10049: spi3-cfa10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDN__GPIO_0_24
+			MX28_PAD_GPMI_RESETN__GPIO_0_28
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_ALE__GPIO_0_26
+			MX28_PAD_GPMI_CLE__GPIO_0_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__LCD_D0
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10049: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	w1_gpio_pins: w1-gpio@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D21__GPIO_1_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_b>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-0 = <&usb1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dts
new file mode 100644
index 000000000000..cb68edd6101b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * 				  Free Electrons
+ */
+
+/*
+ * The CFA-10055 is an expansion board for the CFA-10036 module and
+ * CFA-10037, thus we need to include the CFA-10037 DTS.
+ */
+#include "imx28-cfa10037.dts"
+
+/ {
+	model = "Crystalfontz CFA-10055 Board";
+	compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	spi-2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10055>;
+		status = "okay";
+		sck-gpios = <&gpio2 16 0>;
+		mosi-gpios = <&gpio2 17 0>;
+		miso-gpios = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8357: hx8357@0 {
+			compatible = "himax,hx8357b", "himax,hx8357";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_cfa10055
+		     &lcdif_pins_cfa10055
+		     &lcdif_pins_cfa10055_pullup>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9216000>;
+				hactive = <320>;
+				vactive = <480>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vfront-porch = <2>;
+				hsync-len = <15>;
+				vsync-len = <15>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&pinctrl {
+	spi2_pins_cfa10055: spi2-cfa10055@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SCK__GPIO_2_16
+			MX28_PAD_SSP2_MOSI__GPIO_2_17
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__LCD_D0
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10055: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_b>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10056.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10056.dts
new file mode 100644
index 000000000000..bc2d6fcad12f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10056.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Free Electrons
+ */
+
+/*
+ * The CFA-10055 is an expansion board for the CFA-10036 module and
+ * CFA-10037, thus we need to include the CFA-10037 DTS.
+ */
+#include "imx28-cfa10037.dts"
+
+/ {
+	model = "Crystalfontz CFA-10056 Board";
+	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	spi-2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10056>;
+		status = "okay";
+		sck-gpios = <&gpio2 16 0>;
+		mosi-gpios = <&gpio2 17 0>;
+		miso-gpios = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8369: hx8369@0 {
+			compatible = "himax,hx8369a", "himax,hx8369";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+		};
+	};
+};
+
+&pinctrl {
+	spi2_pins_cfa10056: spi2-cfa10056@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SCK__GPIO_2_16
+			MX28_PAD_SSP2_MOSI__GPIO_2_17
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	lcdif_pins_cfa10056: lcdif-10056@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+			&lcdif_pins_cfa10056
+			&lcdif_pins_cfa10056_pullup >;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <32000000>;
+				hactive = <480>;
+				vactive = <800>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vfront-porch = <2>;
+				hsync-len = <5>;
+				vsync-len = <5>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts
new file mode 100644
index 000000000000..5875c3d7ba97
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Copyright 2012 Free Electrons
+ */
+
+/*
+ * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10057 Board";
+	compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
+
+	reg_usb1_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_pins_cfa10057>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio0 7 1>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_cfa10057
+		     &lcdif_pins_cfa10057>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <30000000>;
+				hactive = <480>;
+				vactive = <800>;
+				hfront-porch = <12>;
+				hback-porch = <2>;
+				vfront-porch = <5>;
+				vback-porch = <3>;
+				hsync-len = <2>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_pins_cfa10057: usb-10057@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__LCD_D0
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10057: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-0 = <&usb1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts
new file mode 100644
index 000000000000..b414e67ef379
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Copyright 2013 Free Electrons
+ */
+
+/*
+ * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10058 Board";
+	compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
+
+	reg_usb1_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_pins_cfa10058>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio0 7 1>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+			 &lcdif_pins_cfa10058>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <40>;
+				vback-porch = <13>;
+				vfront-porch = <29>;
+				hsync-len = <8>;
+				vsync-len = <8>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_pins_cfa10058: usb-10058@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10058: lcdif-10058@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_b>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-0 = <&usb1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-485.dts
new file mode 100644
index 000000000000..b73020ff1053
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-485.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include "imx28-duckbill-2.dts"
+
+/ {
+	model = "I2SE Duckbill 2 485";
+	compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
+
+	leds {
+		rs485-red {
+			label = "duckbill:red:rs485";
+			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+		};
+
+		rs485-green {
+			label = "duckbill:green:rs485";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&led_pins {
+	fsl,pinmux-ids = <
+		MX28_PAD_SAIF0_MCLK__GPIO_3_20
+		MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+		MX28_PAD_I2C0_SCL__GPIO_3_24
+		MX28_PAD_I2C0_SDA__GPIO_3_25
+	>;
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-enocean.dts
new file mode 100644
index 000000000000..473d99b9b42f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-enocean.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "imx28-duckbill-2.dts"
+
+/ {
+	model = "I2SE Duckbill 2 EnOcean";
+	compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
+
+	leds {
+		enocean-blue {
+			label = "duckbill:blue:enocean";
+			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+		};
+
+		enocean-red {
+			label = "duckbill:red:enocean";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+		};
+
+		enocean-green {
+			label = "duckbill:green:enocean";
+			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&enocean_button>;
+
+		key-enocean {
+			label = "EnOcean";
+			linux,code = <KEY_NEW>;
+			gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&led_pins {
+	fsl,pinmux-ids = <
+		MX28_PAD_SAIF0_MCLK__GPIO_3_20
+		MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+		MX28_PAD_AUART0_CTS__GPIO_3_2
+		MX28_PAD_I2C0_SCL__GPIO_3_24
+		MX28_PAD_I2C0_SDA__GPIO_3_25
+	>;
+};
+
+&pinctrl {
+	enocean_button: enocean-button@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART0_RTS__GPIO_3_3
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-spi.dts
new file mode 100644
index 000000000000..859d97a5a775
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-spi.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include "imx28-duckbill-2.dts"
+
+/ {
+	model = "I2SE Duckbill 2 SPI";
+	compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28";
+
+	aliases {
+		ethernet1 = &qca7000;
+	};
+};
+
+&auart0 {
+	status = "disabled";
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&pinctrl {
+	qca7000_pins: qca7000@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART0_RTS__GPIO_3_3    /* Interrupt */
+			MX28_PAD_LCD_D13__GPIO_1_13      /* QCA7K reset */
+			MX28_PAD_LCD_D14__GPIO_1_14      /* GPIO 0 */
+			MX28_PAD_LCD_D15__GPIO_1_15      /* GPIO 1 */
+			MX28_PAD_LCD_D18__GPIO_1_18      /* GPIO 2 */
+			MX28_PAD_LCD_D21__GPIO_1_21      /* GPIO 3 */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	/delete-property/ bus-width;
+	/delete-property/ vmmc-supply;
+	status = "okay";
+
+	qca7000: ethernet@0 {
+		reg = <0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&qca7000_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <8000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2.dts
new file mode 100644
index 000000000000..4e28212e9626
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+	model = "I2SE Duckbill 2";
+	compatible = "i2se,duckbill-2", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		status-red {
+			label = "duckbill:red:status";
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		status-green {
+			label = "duckbill:green:status";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+	phy-supply = <&reg_3p3v>;
+	phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_phy_int_pin>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+			max-speed = <100>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_phy_reset_pin: mac0-phy-reset@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_phy_int_pin: mac0-phy-int@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins: leds@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF0_MCLK__GPIO_3_20
+			MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+	non-removable;
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins_b
+		&mmc2_cd_cfg &mmc2_sck_cfg_b>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill.dts
new file mode 100644
index 000000000000..13ffd533fdea
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei@heimpold.de>
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+	model = "I2SE Duckbill";
+	compatible = "i2se,duckbill", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		status-red {
+			label = "duckbill:red:status";
+			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		status-green {
+			label = "duckbill:green:status";
+			gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+	phy-supply = <&reg_3p3v>;
+	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_phy_reset_pin: mac0-phy-reset@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__GPIO_2_7    /* PHY Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins: leds@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART1_RX__GPIO_3_4
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx283lc.dts
index 29f8a3a245d4..7ae2d4ca8ef0 100644
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx283lc.dts
@@ -47,7 +47,7 @@
 	status = "okay";
 };
 
-&pinctrl{
+&pinctrl {
 	pinctrl-names = "default";
 	pinctrl-0 = <&hog_pins_cpuimx283>;
 
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx287lc.dts
index cd875ace168d..cd875ace168d 100644
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx287lc.dts
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi
index 3280fddaaf0d..652fc9e57a55 100644
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi
@@ -14,17 +14,17 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 4 1000000>;
+		pwms = <&pwm 4 1000000 0>;
 		brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>;
 		default-brightness-level = <10>;
 	};
 
-	button-sw3 {
+	gpio-keys-0 {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
 
-		sw3 {
+		switch-sw3 {
 			label = "SW3";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
@@ -32,12 +32,12 @@
 		};
 	};
 
-	button-sw4 {
+	gpio-keys-1 {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
 
-		sw4 {
+		switch-sw4 {
 			label = "SW4";
 			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
@@ -69,55 +69,45 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		reg_lcd_3v3: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_lcd_3v3: regulator-1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		reg_usb0_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usb0_vbus: regulator-2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usb1_vbus: regulator-3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts b/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts
new file mode 100644
index 000000000000..330d3aff6b6c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts
@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "Freescale i.MX28 Evaluation Kit";
+	compatible = "fsl,imx28-evk", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 28 0>;
+	};
+
+	reg_fec_3v3: regulator-fec-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 15 0>;
+	};
+
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 9 0>;
+		enable-active-high;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 8 0>;
+		enable-active-high;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 30 0>;
+		enable-active-high;
+	};
+
+	reg_can_3v3: regulator-can-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 13 0>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx28-evk-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-evk-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio3_5>;
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio3 5 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight_display: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_pins_a>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
+		     &gpmi_pins_evk>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_evk>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	fsl,ave-ctrl = <4>;
+	fsl,ave-delay = <2>;
+	fsl,settling = <10>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x51>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-supply = <&reg_fec_3v3>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP1_CMD__GPIO_2_13
+			MX28_PAD_SSP1_DATA3__GPIO_2_15
+			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+			MX28_PAD_SSP1_SCK__GPIO_2_12
+			MX28_PAD_PWM3__GPIO_3_28
+			MX28_PAD_LCD_RESET__GPIO_3_30
+			MX28_PAD_AUART2_RX__GPIO_3_8
+			MX28_PAD_AUART2_TX__GPIO_3_9
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pin_gpio3_5: led_gpio3_5@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	gpmi_pins_evk: gpmi-nand-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE1N__GPMI_CE1N
+			MX28_PAD_GPMI_RDY1__GPMI_READY1
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_evk: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <8>;
+	wp-gpios = <&gpio2 12 0>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
+
+&ssp1 {
+	compatible = "fsl,imx28-mmc";
+	bus-width = <8>;
+	wp-gpios = <&gpio0 28 0>;
+};
+
+&ssp2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	flash: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pins_a>;
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-lwe.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi
index bb971e660db8..410dfe17f8ca 100644
--- a/arch/arm/boot/dts/imx28-lwe.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi
@@ -18,6 +18,7 @@
 
 	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
+		device_type = "memory";
 	};
 
 	reg_3v3: regulator-reg-3v3 {
@@ -54,23 +55,6 @@
 	status = "okay";
 };
 
-&saif0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif0_pins_a>;
-	#sound-dai-cells = <0>;
-	assigned-clocks = <&clks 53>;
-	assigned-clock-rates = <12000000>;
-	status = "okay";
-};
-
-&saif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif1_pins_a>;
-	fsl,saif-master = <&saif0>;
-	#sound-dai-cells = <0>;
-	status = "okay";
-};
-
 &spi3_pins_a {
 	fsl,pinmux-ids = <
 		MX28_PAD_AUART2_RX__SSP3_D4
@@ -108,7 +92,7 @@
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
-		spi-max-frequency = <40000000>;
+		spi-max-frequency = <20000000>;
 		reg = <0>;
 
 		partitions {
@@ -132,14 +116,21 @@
 				reg = <0x90000 0x10000>;
 			};
 
-			partition@100000 {
-				label = "kernel";
-				reg = <0x100000 0x400000>;
+			partition@a0000 {
+				label = "rescue";
+				reg = <0xa0000 0xf40000>;
+			};
+
+			partition@fe0000 {
+				/* 1st sector for SPL boot img source data */
+				label = "spl-boot-data1";
+				reg = <0xfe0000 0x10000>;
 			};
 
-			partition@500000 {
-				label = "swupdate";
-				reg = <0x500000 0x800000>;
+			partition@ff0000 {
+				/* 2nd sector for SPL boot img source data */
+				label = "spl-boot-data2";
+				reg = <0xff0000 0x10000>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi
new file mode 100644
index 000000000000..66facef10ba9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx28.dtsi"
+
+/ {
+	model = "Aries/DENX M28";
+	compatible = "aries,m28", "denx,m28", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	reg_3p3v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&gpmi {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts b/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts
new file mode 100644
index 000000000000..34b4d3246db1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "MSR M28CU3";
+	compatible = "msr,m28cu3", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_gpio>;
+
+		user1 {
+			label = "sd0-led";
+			gpios = <&gpio2 26 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user2 {
+			label = "sd1-led";
+			gpios = <&gpio2 24 0>;
+			linux,default-trigger = "mmc2";
+		};
+	};
+
+	reg_3p3v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vddio_sd0: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 29 0>;
+	};
+
+	reg_vddio_sd1: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 0>;
+	};
+
+	reg_usb1_vbus: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 8 0>;
+		enable-active-high;
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_2pins_b>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_b>;
+	status = "okay";
+};
+
+&gpmi {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+
+	partition@0 {
+		label = "gpmi-nfc-0-boot";
+		reg = <0x00000000 0x01400000>;
+		read-only;
+	};
+
+	partition@1 {
+		label = "gpmi-nfc-general-use";
+		reg = <0x01400000 0x0ec00000>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_m28>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <6410256>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vfront-porch = <5>;
+				hsync-len = <30>;
+				vsync-len = <3>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&ocotp {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS0__GPIO_2_19
+			MX28_PAD_PWM4__GPIO_3_29
+			MX28_PAD_AUART2_RX__GPIO_3_8
+			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_m28: lcdif-m28@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_VSYNC__LCD_VSYNC
+			MX28_PAD_LCD_HSYNC__LCD_HSYNC
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_RESET__LCD_RESET
+			MX28_PAD_LCD_CS__LCD_ENABLE
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins_gpio: leds-m28@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP3_MISO__GPIO_2_26
+			MX28_PAD_SSP3_SCK__GPIO_2_24
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins_a
+		     &mmc2_cd_cfg
+		     &mmc2_sck_cfg_a>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vddio_sd1>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_a>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts b/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts
new file mode 100644
index 000000000000..13070ca08cff
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx28-m28.dtsi"
+
+/ {
+	model = "Aries/DENX M28EVK";
+	compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	reg_vddio_sd0: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 28 0>;
+	};
+
+	reg_usb0_vbus: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 12 0>;
+	};
+
+	reg_usb1_vbus: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 13 0>;
+	};
+
+	sound {
+		compatible = "denx,m28evk-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "m28evk-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	status = "okay";
+};
+
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_pins_a>;
+	status = "okay";
+};
+
+&auart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart2_2pins_b>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+
+	eeprom: eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_m28>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33260000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <0>;
+				hfront-porch = <256>;
+				vback-porch = <0>;
+				vfront-porch = <45>;
+				hsync-len = <1>;
+				vsync-len = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	status = "okay";
+	fsl,lradc-touchscreen-wires = <4>;
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	clocks = <&clks 57>, <&clks 57>;
+	clock-names = "ipg", "ahb";
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+			MX28_PAD_AUART2_CTS__GPIO_3_10
+			MX28_PAD_AUART2_RTS__GPIO_3_11
+			MX28_PAD_AUART3_RX__GPIO_3_12
+			MX28_PAD_AUART3_TX__GPIO_3_13
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_m28: lcdif-m28@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_ENABLE__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <8>;
+	wp-gpios = <&gpio3 10 0>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
+
+&ssp2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_a>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_a>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-pinfunc.h b/arch/arm/boot/dts/nxp/mxs/imx28-pinfunc.h
index d427e6c2fa78..d427e6c2fa78 100644
--- a/arch/arm/boot/dts/imx28-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-pinfunc.h
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts b/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts
new file mode 100644
index 000000000000..ca62e7933116
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "SchulerControl GmbH, SC SPS 1";
+	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	reg_usb0_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 9 0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led-1 {
+			label = "sps1-1:yellow:user";
+			gpios = <&gpio0 6 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			label = "sps1-2:red:user";
+			gpios = <&gpio0 3 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-3 {
+			label = "sps1-3:red:user";
+			gpios = <&gpio0 0 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog-gpios@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D00__GPIO_0_0
+			MX28_PAD_GPMI_D03__GPIO_0_3
+			MX28_PAD_GPMI_D06__GPIO_0_6
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "everspin,mr25h256", "mr25h256";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_b>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-ts4600.dts b/arch/arm/boot/dts/nxp/mxs/imx28-ts4600.dts
new file mode 100644
index 000000000000..ae6ed5c41be3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-ts4600.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Savoir-Faire Linux
+ * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+
+	model = "Technologic Systems i.MX28 TS-4600";
+	compatible = "technologic,imx28-ts4600", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x10000000>;   /* 256MB */
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpio = <&gpio3 28 GPIO_ACTIVE_LOW>;
+	};
+
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	en_sd_pwr: en-sd-pwr@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_sck_cfg
+		     &en_sd_pwr>;
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
index 6d7b044fec5b..9290635352f1 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 /*
  * Copyright 2012 Shawn Guo <shawn.guo@linaro.org>
  * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -167,7 +131,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 0 500000>;
+		pwms = <&pwm 0 500000 0>;
 		/*
 		 * a silly way to create a 1:1 relationship between the
 		 * PWM value and the actual duty cycle
@@ -221,16 +185,16 @@
 		linux,no-autorepeat;
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_spi_gpio_pins>;
 
-		gpio-sck = <&gpio2 24 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio2 25 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <3>;
 		cs-gpios = <
 			&gpio2 27 GPIO_ACTIVE_LOW
@@ -296,6 +260,7 @@
 	sgtl5000: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 		clocks = <&mclk>;
@@ -358,7 +323,6 @@
 		display-timings {
 			native-mode = <&timing5>;
 			timing0: timing0 {
-				panel-name = "VGA";
 				clock-frequency = <25175000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -375,7 +339,6 @@
 			};
 
 			timing1: timing1 {
-				panel-name = "ETV570";
 				clock-frequency = <25175000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -392,7 +355,6 @@
 			};
 
 			timing2: timing2 {
-				panel-name = "ET0350";
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
@@ -409,7 +371,6 @@
 			};
 
 			timing3: timing3 {
-				panel-name = "ET0430";
 				clock-frequency = <9000000>;
 				hactive = <480>;
 				vactive = <272>;
@@ -426,7 +387,6 @@
 			};
 
 			timing4: timing4 {
-				panel-name = "ET0500", "ET0700";
 				clock-frequency = <33260000>;
 				hactive = <800>;
 				vactive = <480>;
@@ -443,7 +403,6 @@
 			};
 
 			timing5: timing5 {
-				panel-name = "ETQ570";
 				clock-frequency = <6400000>;
 				hactive = <320>;
 				vactive = <240>;
@@ -656,13 +615,13 @@
 &saif0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&saif0_pins_b>;
-	fsl,saif-master;
 	status = "okay";
 };
 
 &saif1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
 	status = "okay";
 };
 
@@ -688,6 +647,7 @@
 	vbus-supply = <&reg_usb0_vbus>;
 	disable-over-current;
 	dr_mode = "peripheral";
+	phy_type = "utmi";
 	status = "okay";
 };
 
@@ -695,19 +655,18 @@
 	vbus-supply = <&reg_usb1_vbus>;
 	disable-over-current;
 	dr_mode = "host";
+	phy_type = "utmi";
 	status = "okay";
 };
 
 &usbphy0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&tx28_usbphy0_pins>;
-	phy_type = "utmi";
 	status = "okay";
 };
 
 &usbphy1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&tx28_usbphy1_pins>;
-	phy_type = "utmi";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx28-xea.dts b/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts
index a400c108f66a..6c5e6856648a 100644
--- a/arch/arm/boot/dts/imx28-xea.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts
@@ -8,6 +8,7 @@
 #include "imx28-lwe.dtsi"
 
 / {
+	model = "Liebherr XEA board";
 	compatible = "lwn,imx28-xea", "fsl,imx28";
 };
 
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
index 130b4145af82..ece46d0e7c7f 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
@@ -56,7 +56,7 @@
 		reg = <0x80000000 0x80000>;
 		ranges;
 
-		apbh@80000000 {
+		apbh-bus@80000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -78,17 +78,13 @@
 				status = "disabled";
 			};
 
-			dma_apbh: dma-apbh@80004000 {
+			dma_apbh: dma-controller@80004000 {
 				compatible = "fsl,imx28-dma-apbh";
 				reg = <0x80004000 0x2000>;
-				interrupts = <82 83 84 85
-					      88 88 88 88
-					      88 88 88 88
-					      87 86 0 0>;
-				interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
-						  "gpmi0", "gmpi1", "gpmi2", "gmpi3",
-						  "gpmi4", "gmpi5", "gpmi6", "gmpi7",
-						  "hsadc", "lcdif", "empty", "empty";
+				interrupts = <82>, <83>, <84>, <85>,
+					     <88>, <88>, <88>, <88>,
+					     <88>, <88>, <88>, <88>,
+					     <87>, <86>, <0>, <0>;
 				#dma-cells = <1>;
 				dma-channels = <16>;
 				clocks = <&clks 25>;
@@ -168,7 +164,7 @@
 				reg = <0x80018000 0x2000>;
 
 				gpio0: gpio@0 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <0>;
 					interrupts = <127>;
 					gpio-controller;
@@ -178,7 +174,7 @@
 				};
 
 				gpio1: gpio@1 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <1>;
 					interrupts = <126>;
 					gpio-controller;
@@ -188,7 +184,7 @@
 				};
 
 				gpio2: gpio@2 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <2>;
 					interrupts = <125>;
 					gpio-controller;
@@ -198,7 +194,7 @@
 				};
 
 				gpio3: gpio@3 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <3>;
 					interrupts = <124>;
 					gpio-controller;
@@ -208,7 +204,7 @@
 				};
 
 				gpio4: gpio@4 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <4>;
 					interrupts = <123>;
 					gpio-controller;
@@ -759,6 +755,16 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				pwm7_pins_a: pwm7@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF1_SDATA0__PWM_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -994,26 +1000,22 @@
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx28-dma-apbx";
 				reg = <0x80024000 0x2000>;
-				interrupts = <78 79 66 0
-					      80 81 68 69
-					      70 71 72 73
-					      74 75 76 77>;
-				interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
-						  "saif0", "saif1", "i2c0", "i2c1",
-						  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
-						  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
+				interrupts = <78>, <79>, <66>, <0>,
+					     <80>, <81>, <68>, <69>,
+					     <70>, <71>, <72>, <73>,
+					     <74>, <75>, <76>, <77>;
 				#dma-cells = <1>;
 				dma-channels = <16>;
 				clocks = <&clks 26>;
 			};
 
 			dcp: crypto@80028000 {
-				compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
+				compatible = "fsl,imx28-dcp";
 				reg = <0x80028000 0x2000>;
-				interrupts = <52 53 54>;
+				interrupts = <52>, <53>, <54>;
 				status = "okay";
 			};
 
@@ -1100,7 +1102,7 @@
 			};
 		};
 
-		apbx@80040000 {
+		apbx-bus@80040000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -1108,7 +1110,7 @@
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
+				compatible = "fsl,imx28-clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
@@ -1144,8 +1146,8 @@
 			lradc: lradc@80050000 {
 				compatible = "fsl,imx28-lradc";
 				reg = <0x80050000 0x2000>;
-				interrupts = <10 14 15 16 17 18 19
-						20 21 22 23 24 25>;
+				interrupts = <10>, <14>, <15>, <16>, <17>, <18>, <19>,
+					     <20>, <21>, <22>, <23>, <24>, <25>;
 				status = "disabled";
 				clocks = <&clks 41>;
 				#io-channel-cells = <1>;
@@ -1193,7 +1195,7 @@
 				compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
 				reg = <0x80064000 0x2000>;
 				clocks = <&clks 44>;
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				fsl,pwm-number = <8>;
 				status = "disabled";
 			};
@@ -1201,7 +1203,7 @@
 			timer: timrot@80068000 {
 				compatible = "fsl,imx28-timrot", "fsl,timrot";
 				reg = <0x80068000 0x2000>;
-				interrupts = <48 49 50 51>;
+				interrupts = <48>, <49>, <50>, <51>;
 				clocks = <&clks 26>;
 			};
 
@@ -1260,7 +1262,7 @@
 				reg = <0x80074000 0x1000>;
 				interrupts = <47>;
 				clocks = <&clks 45>, <&clks 26>;
-				clock-names = "uart", "apb_pclk";
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/mxs-pinfunc.h b/arch/arm/boot/dts/nxp/mxs/mxs-pinfunc.h
index 31297abcbc71..31297abcbc71 100644
--- a/arch/arm/boot/dts/mxs-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/mxs/mxs-pinfunc.h
diff --git a/arch/arm/boot/dts/nxp/vf/Makefile b/arch/arm/boot/dts/nxp/vf/Makefile
new file mode 100644
index 000000000000..0a4a7f9dd43e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/Makefile
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_VF610) += \
+	vf500-colibri-eval-v3.dtb \
+	vf610-bk4.dtb \
+	vf610-colibri-eval-v3.dtb \
+	vf610m4-colibri.dtb \
+	vf610-cosmic.dtb \
+	vf610m4-cosmic.dtb \
+	vf610-twr.dtb \
+	vf610-zii-cfu1.dtb \
+	vf610-zii-dev-rev-b.dtb \
+	vf610-zii-dev-rev-c.dtb \
+	vf610-zii-scu4-aib.dtb \
+	vf610-zii-spb4.dtb \
+	vf610-zii-ssmb-dtu.dtb \
+	vf610-zii-ssmb-spu3.dtb
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi
index 14c411f146f5..86c360868e4b 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi
@@ -17,6 +17,7 @@
 	panel: panel {
 		compatible = "edt,et057090dhu";
 		backlight = <&bl>;
+		power-supply = <&reg_3v3>;
 
 		port {
 			panel_in: endpoint {
@@ -55,7 +56,7 @@
 	brightness-levels = <0 4 8 16 32 64 128 255>;
 	default-brightness-level = <6>;
 	power-supply = <&reg_3v3>;
-	status  = "okay";
+	status = "okay";
 };
 
 &dcu0 {
@@ -142,11 +143,9 @@
 };
 
 &iomuxc {
-	vf610-colibri {
-		pinctrl_can_int: can_int {
-			fsl,pins = <
-				VF610_PAD_PTB21__GPIO_43	0x22ed
-			>;
-		};
+	pinctrl_can_int: can_intgrp {
+		fsl,pins = <
+			VF610_PAD_PTB21__GPIO_43	0x22ed
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi
new file mode 100644
index 000000000000..98f9ee1b0030
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ *
+ */
+
+/ {
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec0;
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		pwms = <&pwm0 0 5000000 0>;
+		enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&reg_module_3v3_avdd>;
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&reg_module_3v3_avdd>;
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan0>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&clks {
+	assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
+			  <&clks VF610_CLK_ENET_TS_SEL>;
+	assigned-clock-parents = <&clks VF610_CLK_ENET_50M>,
+				 <&clks VF610_CLK_ENET_50M>;
+};
+
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	disable-wp;
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	phy-supply = <&reg_module_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	status = "okay";
+
+	nand@0 {
+		compatible = "fsl,vf610-nfc-nandcs";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <32>;
+		nand-ecc-step-size = <2048>;
+		nand-on-flash-bbt;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&usbdev0 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbmisc0 {
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexcan0: can0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__CAN0_RX	0x31F1
+			VF610_PAD_PTB15__CAN0_TX	0x31F2
+		>;
+	};
+
+	pinctrl_flexcan1: can1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__CAN1_RX	0x31F1
+			VF610_PAD_PTB17__CAN1_TX	0x31F2
+		>;
+	};
+
+	pinctrl_gpio_ext: gpio_extgrp {
+		fsl,pins = <
+			VF610_PAD_PTD10__GPIO_89	0x22ed /* EXT_IO_0 */
+			VF610_PAD_PTD9__GPIO_88		0x22ed /* EXT_IO_1 */
+			VF610_PAD_PTD26__GPIO_68	0x22ed /* EXT_IO_2 */
+		>;
+	};
+
+	pinctrl_dcu0_1: dcu01grp {
+		fsl,pins = <
+			VF610_PAD_PTE0__DCU0_HSYNC	0x1902
+			VF610_PAD_PTE1__DCU0_VSYNC	0x1902
+			VF610_PAD_PTE2__DCU0_PCLK	0x1902
+			VF610_PAD_PTE4__DCU0_DE		0x1902
+			VF610_PAD_PTE5__DCU0_R0		0x1902
+			VF610_PAD_PTE6__DCU0_R1		0x1902
+			VF610_PAD_PTE7__DCU0_R2		0x1902
+			VF610_PAD_PTE8__DCU0_R3		0x1902
+			VF610_PAD_PTE9__DCU0_R4		0x1902
+			VF610_PAD_PTE10__DCU0_R5	0x1902
+			VF610_PAD_PTE11__DCU0_R6	0x1902
+			VF610_PAD_PTE12__DCU0_R7	0x1902
+			VF610_PAD_PTE13__DCU0_G0	0x1902
+			VF610_PAD_PTE14__DCU0_G1	0x1902
+			VF610_PAD_PTE15__DCU0_G2	0x1902
+			VF610_PAD_PTE16__DCU0_G3	0x1902
+			VF610_PAD_PTE17__DCU0_G4	0x1902
+			VF610_PAD_PTE18__DCU0_G5	0x1902
+			VF610_PAD_PTE19__DCU0_G6	0x1902
+			VF610_PAD_PTE20__DCU0_G7	0x1902
+			VF610_PAD_PTE21__DCU0_B0	0x1902
+			VF610_PAD_PTE22__DCU0_B1	0x1902
+			VF610_PAD_PTE23__DCU0_B2	0x1902
+			VF610_PAD_PTE24__DCU0_B3	0x1902
+			VF610_PAD_PTE25__DCU0_B4	0x1902
+			VF610_PAD_PTE26__DCU0_B5	0x1902
+			VF610_PAD_PTE27__DCU0_B6	0x1902
+			VF610_PAD_PTE28__DCU0_B7	0x1902
+		>;
+	};
+
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x33e2
+			VF610_PAD_PTD6__DSPI1_SIN		0x33e1
+			VF610_PAD_PTD7__DSPI1_SOUT		0x33e2
+			VF610_PAD_PTD8__DSPI1_SCK		0x33e2
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+			VF610_PAD_PTB20__GPIO_42	0x219d
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKOUT		0x30d2
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpio_bl_ongrp {
+		fsl,pins = <
+			VF610_PAD_PTC0__GPIO_45		0x22ef
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c0_gpio: i2c0gpiogrp {
+		fsl,pins = <
+			VF610_PAD_PTB14__GPIO_36		0x37ff
+			VF610_PAD_PTB15__GPIO_37		0x37ff
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			VF610_PAD_PTD23__NF_IO7		0x28df
+			VF610_PAD_PTD22__NF_IO6		0x28df
+			VF610_PAD_PTD21__NF_IO5		0x28df
+			VF610_PAD_PTD20__NF_IO4		0x28df
+			VF610_PAD_PTD19__NF_IO3		0x28df
+			VF610_PAD_PTD18__NF_IO2		0x28df
+			VF610_PAD_PTD17__NF_IO1		0x28df
+			VF610_PAD_PTD16__NF_IO0		0x28df
+			VF610_PAD_PTB24__NF_WE_B	0x28c2
+			VF610_PAD_PTB25__NF_CE0_B	0x28c2
+			VF610_PAD_PTB27__NF_RE_B	0x28c2
+			VF610_PAD_PTC26__NF_RB_B	0x283d
+			VF610_PAD_PTC27__NF_ALE		0x28c2
+			VF610_PAD_PTC28__NF_CLE		0x28c2
+		>;
+	};
+
+	pinctrl_pwm0: pwm0grp {
+		fsl,pins = <
+			VF610_PAD_PTB0__FTM0_CH0		0x1182
+			VF610_PAD_PTB1__FTM0_CH1		0x1182
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			VF610_PAD_PTB8__FTM1_CH0		0x1182
+			VF610_PAD_PTB9__FTM1_CH1		0x1182
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+			VF610_PAD_PTB12__UART0_RTS		0x21a2
+			VF610_PAD_PTB13__UART0_CTS		0x21a1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB4__UART1_TX		0x21a2
+			VF610_PAD_PTB5__UART1_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTD0__UART2_TX		0x21a2
+			VF610_PAD_PTD1__UART2_RX		0x21a1
+			VF610_PAD_PTD2__UART2_RTS		0x21a2
+			VF610_PAD_PTD3__UART2_CTS		0x21a1
+		>;
+	};
+
+	pinctrl_usbh1_reg: gpio_usb_vbusgrp {
+		fsl,pins = <
+			VF610_PAD_PTD4__GPIO_83			0x22ed
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/nxp/vf/vf500-colibri-eval-v3.dts
index 088964f8dc4b..088964f8dc4b 100644
--- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf500-colibri-eval-v3.dts
diff --git a/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi
new file mode 100644
index 000000000000..ae3403c766d6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ */
+
+#include "vf500.dtsi"
+#include "vf-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri VF50 COM";
+	compatible = "toradex,vf500-colibri_vf50", "fsl,vf500";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;
+	};
+
+	touchscreen: vf50-touchscreen {
+		compatible = "toradex,vf50-touchscreen";
+		io-channels = <&adc1 0>,<&adc0 0>,
+				<&adc0 1>,<&adc1 2>;
+		xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "idle","default","gpios";
+		pinctrl-0 = <&pinctrl_touchctrl_idle>;
+		pinctrl-1 = <&pinctrl_touchctrl_default>;
+		pinctrl-2 = <&pinctrl_touchctrl_gpios>;
+		vf50-ts-min-pressure = <200>;
+		status = "disabled";
+	};
+};
+
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <33000000>;
+};
+
+&iomuxc {
+	pinctrl_touchctrl_idle: touchctrl_idlegrp {
+		fsl,pins = <
+			VF610_PAD_PTA18__GPIO_8		0x006d
+			VF610_PAD_PTA19__GPIO_9		0x006c
+			>;
+	};
+
+	pinctrl_touchctrl_default: touchctrl_defaultgrp {
+		fsl,pins = <
+			VF610_PAD_PTA18__ADC0_SE0	0x0040
+			VF610_PAD_PTA19__ADC0_SE1	0x0040
+			VF610_PAD_PTA16__ADC1_SE0	0x0040
+			VF610_PAD_PTB2__ADC1_SE2	0x0040
+			>;
+	};
+
+	pinctrl_touchctrl_gpios: touchctrl_gpiosgrp {
+		fsl,pins = <
+			VF610_PAD_PTA23__GPIO_13	0x22e9
+			VF610_PAD_PTB23__GPIO_93	0x22e9
+			VF610_PAD_PTA22__GPIO_12	0x22e9
+			VF610_PAD_PTA11__GPIO_4		0x22e9
+			>;
+	};
+};
diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/nxp/vf/vf500.dtsi
index 0c0dd442300a..71ccdaa6f269 100644
--- a/arch/arm/boot/dts/vf500.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf500.dtsi
@@ -43,15 +43,13 @@
 			};
 		};
 
-		bus@40080000 {
-			pmu@40089000 {
-				compatible = "arm,cortex-a5-pmu";
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-affinity = <&a5_cpu>;
-				reg = <0x40089000 0x1000>;
-			};
-		};
+	};
 
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a5_cpu>;
+		interrupt-parent = <&mscm_ir>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
index 830c85476b3d..e36c854dc297 100644
--- a/arch/arm/boot/dts/vf610-bk4.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
@@ -38,7 +38,7 @@
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
 		/* LED D5 */
-		led0: heartbeat {
+		led0: led-heartbeat {
 			label = "heartbeat";
 			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -61,14 +61,14 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	spi-gpio {
+	spi {
 		compatible = "spi-gpio";
 		pinctrl-0 = <&pinctrl_gpio_spi>;
 		pinctrl-names = "default";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		/* PTD12 ->RPIO[91] */
-		sck-gpios  = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
 		/* PTD10 ->RPIO[89] */
 		miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <0>;
@@ -79,7 +79,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			/* PTB18 -> RGPIO[40] */
-			load-gpios  = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 			spi-max-frequency = <100000>;
 		};
 	};
@@ -119,7 +119,7 @@
 	status = "okay";
 
 	spidev0@0 {
-		compatible = "lwn,bk4";
+		compatible = "lwn,bk4-spi";
 		spi-max-frequency = <30000000>;
 		reg = <0>;
 		fsl,spi-cs-sck-delay = <200>;
@@ -136,7 +136,7 @@
 	#address-cells = <0>;
 
 	slave {
-		compatible = "lwn,bk4";
+		compatible = "lwn,bk4-spi";
 		spi-max-frequency = <30000000>;
 	};
 };
@@ -458,7 +458,7 @@
 		>;
 	};
 
-	pinctrl_gpio_spi: pinctrl-gpio-spi {
+	pinctrl_gpio_spi: pinctrl-gpio-spigrp {
 		fsl,pins = <
 			VF610_PAD_PTB18__GPIO_40        0x1183
 			VF610_PAD_PTD10__GPIO_89        0x1183
diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/nxp/vf/vf610-colibri-eval-v3.dts
index fb661e8a2dc6..fb661e8a2dc6 100644
--- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-colibri-eval-v3.dts
diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi
index 607cec2df861..20aed3946214 100644
--- a/arch/arm/boot/dts/vf610-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi
@@ -8,7 +8,6 @@
 
 / {
 	model = "Toradex Colibri VF61 COM";
-	compatible = "toradex,vf610-colibri_vf61", "fsl,vf610";
 
 	memory@80000000 {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts b/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts
new file mode 100644
index 000000000000..f1e6344b0c69
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013 Linaro Limited
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "PHYTEC Cosmic/Cosmic+ Board";
+	compatible = "phytec,vf610-cosmic", "fsl,vf610";
+
+	chosen {
+		bootargs = "console=ttyLP1,115200";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	enet_ext: enet_ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+};
+
+&clks {
+	clocks = <&sxosc>, <&fxosc>, <&enet_ext>;
+	clock-names = "sxosc", "fxosc", "enet_ext";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+			VF610_PAD_PTB28__GPIO_98	0x219d
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB4__UART1_TX		0x21a2
+			VF610_PAD_PTB5__UART1_RX		0x21a1
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/vf610-pinfunc.h b/arch/arm/boot/dts/nxp/vf/vf610-pinfunc.h
index f1e5a7cf58a9..b7b7322a2d1b 100644
--- a/arch/arm/boot/dts/vf610-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/vf/vf610-pinfunc.h
@@ -420,7 +420,7 @@
 #define VF610_PAD_PTD29__FTM3_CH2		0x104 0x000 ALT4 0x0
 #define VF610_PAD_PTD29__DSPI2_SIN		0x104 0x000 ALT5 0x0
 #define VF610_PAD_PTD29__DEBUG_OUT11		0x104 0x000 ALT7 0x0
-#define VF610_PAD_PTD28__GPIO_66	 	0x108 0x000 ALT0 0x0
+#define VF610_PAD_PTD28__GPIO_66		0x108 0x000 ALT0 0x0
 #define VF610_PAD_PTD28__FB_AD28		0x108 0x000 ALT1 0x0
 #define VF610_PAD_PTD28__NF_IO12		0x108 0x000 ALT2 0x0
 #define VF610_PAD_PTD28__I2C2_SCL		0x108 0x34C ALT3 0x1
@@ -802,5 +802,55 @@
 #define VF610_PAD_PTE28__EWM_OUT		0x214 0x000 ALT7 0x0
 #define VF610_PAD_PTA7__GPIO_134		0x218 0x000 ALT0 0x0
 #define VF610_PAD_PTA7__VIU_PIX_CLK		0x218 0x3AC ALT1 0x1
+#define VF610_PAD_DDR_RESETB			0x21c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A15__DDR_A_15		0x220 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A14__DDR_A_14		0x224 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A13__DDR_A_13		0x228 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A12__DDR_A_12		0x22c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A11__DDR_A_11		0x230 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A10__DDR_A_10		0x234 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A9__DDR_A_9		0x238 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A8__DDR_A_8		0x23c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A7__DDR_A_7		0x240 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A6__DDR_A_6		0x244 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A5__DDR_A_5		0x248 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A4__DDR_A_4		0x24c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A3__DDR_A_3		0x250 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A2__DDR_A_2		0x254 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A1__DDR_A_1		0x258 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A0__DDR_A_0		0x25c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA2__DDR_BA_2		0x260 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA1__DDR_BA_1		0x264 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA0__DDR_BA_0		0x268 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CAS__DDR_CAS_B		0x26c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CKE__DDR_CKE_0		0x270 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CLK__DDR_CLK_0		0x274 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CS__DDR_CS_B_0		0x278 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D15__DDR_D_15		0x27c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D14__DDR_D_14		0x280 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D13__DDR_D_13		0x284 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D12__DDR_D_12		0x288 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D11__DDR_D_11		0x28c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D10__DDR_D_10		0x290 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D9__DDR_D_9		0x294 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D8__DDR_D_8		0x298 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D7__DDR_D_7		0x29c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D6__DDR_D_6		0x2a0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D5__DDR_D_5		0x2a4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D4__DDR_D_4		0x2a8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D3__DDR_D_3		0x2ac 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D2__DDR_D_2		0x2b0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D1__DDR_D_1		0x2b4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D0__DDR_D_0		0x2b8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQM1__DDR_DQM_1		0x2bc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQM0__DDR_DQM_0		0x2c0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQS1__DDR_DQS_1		0x2c4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQS0__DDR_DQS_0		0x2c8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_RAS__DDR_RAS_B		0x2cc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_WE__DDR_WE_B		0x2d0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_ODT1__DDR_ODT_0		0x2d4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_ODT0__DDR_ODT_1		0x2d8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1	0x2dc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2	0x2e0 0x000 ALT0 0x0
 
 #endif
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-twr.dts b/arch/arm/boot/dts/nxp/vf/vf610-twr.dts
new file mode 100644
index 000000000000..e7c2f6d46ab2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-twr.dts
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "VF610 Tower Board";
+	compatible = "fsl,vf610-twr", "fsl,vf610";
+
+	chosen {
+		bootargs = "console=ttyLP1,115200";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;
+	};
+
+	audio_ext: mclk_osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	enet_ext: eth_osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
+	clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
+	assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
+			  <&clks VF610_CLK_ENET_TS_SEL>;
+	assigned-clock-parents = <&clks VF610_CLK_ENET_EXT>,
+				 <&clks VF610_CLK_ENET_EXT>;
+};
+
+&dspi0 {
+	bus-num = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi0>;
+	status = "okay";
+
+	sflash: at26df081a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at26df081a";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	cd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec0 {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+	       #sound-dai-cells = <0>;
+	       compatible = "fsl,sgtl5000";
+	       reg = <0x0a>;
+	       VDDA-supply = <&reg_3p3v>;
+	       VDDIO-supply = <&reg_3p3v>;
+	       clocks = <&clks VF610_CLK_SAI2>;
+	};
+};
+
+&iomuxc {
+	pinctrl_adc0_ad5: adc0ad5grp {
+		fsl,pins = <
+			VF610_PAD_PTC30__ADC0_SE5		0xa1
+		>;
+	};
+
+	pinctrl_dspi0: dspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTB19__DSPI0_CS0		0x1182
+			VF610_PAD_PTB20__DSPI0_SIN		0x1181
+			VF610_PAD_PTB21__DSPI0_SOUT		0x1182
+			VF610_PAD_PTB22__DSPI0_SCK		0x1182
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+			VF610_PAD_PTA7__GPIO_134	0x219d
+		>;
+	};
+
+	pinctrl_fec0: fec0grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC0__ENET_RMII0_MDC		0x30d3
+			VF610_PAD_PTC1__ENET_RMII0_MDIO		0x30d1
+			VF610_PAD_PTC2__ENET_RMII0_CRS		0x30d1
+			VF610_PAD_PTC3__ENET_RMII0_RXD1		0x30d1
+			VF610_PAD_PTC4__ENET_RMII0_RXD0		0x30d1
+			VF610_PAD_PTC5__ENET_RMII0_RXER		0x30d1
+			VF610_PAD_PTC6__ENET_RMII0_TXD1		0x30d2
+			VF610_PAD_PTC7__ENET_RMII0_TXD0		0x30d2
+			VF610_PAD_PTC8__ENET_RMII0_TXEN		0x30d2
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x30d3
+			VF610_PAD_PTB15__I2C0_SDA		0x30d3
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			VF610_PAD_PTD31__NF_IO15	0x28df
+			VF610_PAD_PTD30__NF_IO14	0x28df
+			VF610_PAD_PTD29__NF_IO13	0x28df
+			VF610_PAD_PTD28__NF_IO12	0x28df
+			VF610_PAD_PTD27__NF_IO11	0x28df
+			VF610_PAD_PTD26__NF_IO10	0x28df
+			VF610_PAD_PTD25__NF_IO9		0x28df
+			VF610_PAD_PTD24__NF_IO8		0x28df
+			VF610_PAD_PTD23__NF_IO7		0x28df
+			VF610_PAD_PTD22__NF_IO6		0x28df
+			VF610_PAD_PTD21__NF_IO5		0x28df
+			VF610_PAD_PTD20__NF_IO4		0x28df
+			VF610_PAD_PTD19__NF_IO3		0x28df
+			VF610_PAD_PTD18__NF_IO2		0x28df
+			VF610_PAD_PTD17__NF_IO1		0x28df
+			VF610_PAD_PTD16__NF_IO0		0x28df
+			VF610_PAD_PTB24__NF_WE_B	0x28c2
+			VF610_PAD_PTB25__NF_CE0_B	0x28c2
+			VF610_PAD_PTB27__NF_RE_B	0x28c2
+			VF610_PAD_PTC26__NF_RB_B	0x283d
+			VF610_PAD_PTC27__NF_ALE		0x28c2
+			VF610_PAD_PTC28__NF_CLE		0x28c2
+		>;
+	};
+
+	pinctrl_pwm0: pwm0grp {
+		fsl,pins = <
+			VF610_PAD_PTB0__FTM0_CH0		0x1582
+			VF610_PAD_PTB1__FTM0_CH1		0x1582
+			VF610_PAD_PTB2__FTM0_CH2		0x1582
+			VF610_PAD_PTB3__FTM0_CH3		0x1582
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			VF610_PAD_PTA16__SAI2_TX_BCLK		0x02ed
+			VF610_PAD_PTA18__SAI2_TX_DATA		0x02ee
+			VF610_PAD_PTA19__SAI2_TX_SYNC		0x02ed
+			VF610_PAD_PTA21__SAI2_RX_BCLK		0x02ed
+			VF610_PAD_PTA22__SAI2_RX_DATA		0x02ed
+			VF610_PAD_PTA23__SAI2_RX_SYNC		0x02ed
+			VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x02ed
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB4__UART1_TX		0x21a2
+			VF610_PAD_PTB5__UART1_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTB6__UART2_TX		0x21a2
+			VF610_PAD_PTB7__UART2_RX		0x21a1
+		>;
+	};
+};
+
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <33000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	status = "okay";
+
+	nand@0 {
+		compatible = "fsl,vf610-nfc-nandcs";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-bus-width = <16>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <2048>;
+		nand-on-flash-bbt;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+	status = "okay";
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbdev0 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbmisc0 {
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
index 96495d965163..929426c1299c 100644
--- a/arch/arm/boot/dts/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
@@ -68,8 +68,8 @@
 		pinctrl-0 = <&pinctrl_optical>;
 		pinctrl-names = "default";
 		i2c-bus = <&i2c0>;
-		los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 	};
 
 	supply-voltage-monitor {
@@ -162,7 +162,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6085";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_switch>;
@@ -173,26 +173,26 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_1000_2";
 				};
 
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "eth_cu_1000_3";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_fc_1000_1";
 					phy-mode = "1000base-x";
@@ -200,9 +200,9 @@
 					sfp = <&sff>;
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
-					label = "cpu";
+					phy-mode = "rmii";
 					ethernet = <&fec1>;
 
 					fixed-link {
@@ -333,7 +333,7 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debuggrp {
 		fsl,pins = <
 			VF610_PAD_PTD3__GPIO_82			0x31c2
 			VF610_PAD_PTE3__GPIO_108		0x31c2
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
index 1f9686c33a84..be6147239362 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
@@ -75,7 +75,7 @@
 
 					port@6 {
 						reg = <6>;
-						label = "cpu";
+						phy-mode = "rmii";
 						ethernet = <&fec1>;
 
 						fixed-link {
@@ -288,17 +288,17 @@
 		};
 	};
 
-	spi0 {
+	spi-0 {
 		compatible = "spi-gpio";
 		pinctrl-0 = <&pinctrl_gpio_spi0>;
 		pinctrl-names = "default";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		gpio-sck  = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		cs-gpios  = <&gpio1  9 GPIO_ACTIVE_LOW
-			     &gpio1  8 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW
+			    &gpio1 8 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <2>;
 
 		flash@0 {
@@ -338,6 +338,7 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
 		interrupt-controller;
 		interrupt-parent = <&gpio3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
@@ -345,7 +346,7 @@
 };
 
 &i2c2 {
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
 		pinctrl-names = "default";
@@ -411,13 +412,13 @@
 };
 
 &iomuxc {
-	pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 {
+	pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0-grp {
 		fsl,pins = <
 			VF610_PAD_PTE27__GPIO_132	0x33e2
 		>;
 	};
 
-	pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
+	pinctrl_gpio_spi0: pinctrl-gpio-spi0-grp {
 		fsl,pins = <
 			VF610_PAD_PTB22__GPIO_44	0x33e2
 			VF610_PAD_PTB21__GPIO_43	0x33e2
@@ -427,7 +428,7 @@
 		>;
 	};
 
-	pinctrl_mdio_mux: pinctrl-mdio-mux {
+	pinctrl_mdio_mux: pinctrl-mdio-mux-grp {
 		fsl,pins = <
 			VF610_PAD_PTA18__GPIO_8		0x31c2
 			VF610_PAD_PTA19__GPIO_9		0x31c2
@@ -436,7 +437,7 @@
 		>;
 	};
 
-	pinctrl_pca9554_22: pinctrl-pca95540-22 {
+	pinctrl_pca9554_22: pinctrl-pca95540-22-grp {
 		fsl,pins = <
 			VF610_PAD_PTB28__GPIO_98	0x219d
 		>;
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts
index de79dcfd32e6..79ea7cf57a4d 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts
@@ -44,7 +44,7 @@
 
 					port@0 {
 						reg = <0>;
-						label = "cpu";
+						phy-mode = "rmii";
 						ethernet = <&fec1>;
 
 						fixed-link {
@@ -82,6 +82,11 @@
 						label = "dsa";
 						phy-mode = "xaui";
 						link = <&switch1port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 
@@ -174,6 +179,11 @@
 						label = "dsa";
 						phy-mode = "xaui";
 						link = <&switch0port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 				mdio {
@@ -259,7 +269,7 @@
 		xtal-trim = /bits/ 8 <0x06>;
 
 		sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-		reset-gpio = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+		reset-gpio = <&gpio6 10 GPIO_ACTIVE_LOW>;
 
 		fsl,spi-cs-sck-delay = <180>;
 		fsl,spi-sck-cs-delay = <250>;
@@ -301,7 +311,7 @@
 	 *    I/O14 - OPT1_TX_DIS
 	 *    I/O15 - OPT2_TX_DIS
 	 */
-	gpio6: sx1503@20 {
+	gpio6: pinctrl@20 {
 		compatible = "semtech,sx1503q";
 
 		pinctrl-names = "default";
@@ -340,7 +350,7 @@
 };
 
 &i2c2 {
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
 		pinctrl-names = "default";
@@ -382,7 +392,7 @@
 };
 
 &gpio0 {
-	eth0_intrp {
+	eth0-intrp-hog {
 		gpio-hog;
 		gpios = <23 GPIO_ACTIVE_HIGH>;
 		input;
@@ -391,7 +401,7 @@
 };
 
 &gpio3 {
-	eth0_intrp {
+	eth0-intrp-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_HIGH>;
 		input;
@@ -419,7 +429,7 @@
 };
 
 &iomuxc {
-	pinctr_atzb_rf_233: pinctrl-atzb-rf-233 {
+	pinctr_atzb_rf_233: pinctrl-atzb-rf-233grp {
 		fsl,pins = <
 			VF610_PAD_PTB2__GPIO_24		0x31c2
 			VF610_PAD_PTE27__GPIO_132	0x33e2
@@ -427,7 +437,7 @@
 	};
 
 
-	pinctrl_sx1503_20: pinctrl-sx1503-20 {
+	pinctrl_sx1503_20: pinctrl-sx1503-20grp {
 		fsl,pins = <
 			VF610_PAD_PTB1__GPIO_23		0x219d
 		>;
@@ -440,7 +450,7 @@
 		>;
 	};
 
-	pinctrl_mdio_mux: pinctrl-mdio-mux {
+	pinctrl_mdio_mux: pinctrl-mdio-muxgrp {
 		fsl,pins = <
 			VF610_PAD_PTA18__GPIO_8		0x31c2
 			VF610_PAD_PTA19__GPIO_9		0x31c2
@@ -448,7 +458,7 @@
 		>;
 	};
 
-	pinctrl_fec0_phy_int: pinctrl-fec0-phy-int {
+	pinctrl_fec0_phy_int: pinctrl-fec0-phy-intgrp {
 		fsl,pins = <
 			VF610_PAD_PTB28__GPIO_98	0x219d
 		>;
diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi
index f8299f33a692..91cc496ffb90 100644
--- a/arch/arm/boot/dts/vf610-zii-dev.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi
@@ -59,7 +59,7 @@
 		pinctrl-0 = <&pinctrl_leds_debug>;
 		pinctrl-names = "default";
 
-		debug {
+		led-debug {
 			label = "zii:green:debug1";
 			gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -335,7 +335,7 @@
 		>;
 	};
 
-	pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
+	pinctrl_gpio_spi0: pinctrl-gpio-spi0-grp {
 		fsl,pins = <
 			VF610_PAD_PTB22__GPIO_44	0x33e2
 			VF610_PAD_PTB21__GPIO_43	0x33e2
@@ -345,19 +345,19 @@
 		>;
 	};
 
-	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0-grp {
 		fsl,pins = <
 			VF610_PAD_PTB5__GPIO_27		0x219d
 		>;
 	};
 
-	pinctrl_gpio_switch1: pinctrl-gpio-switch1 {
+	pinctrl_gpio_switch1: pinctrl-gpio-switch1-grp {
 		fsl,pins = <
 			VF610_PAD_PTB4__GPIO_26		0x219d
 		>;
 	};
 
-	pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
+	pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset-grp {
 		fsl,pins = <
 			 VF610_PAD_PTE14__GPIO_119	0x31c2
 			 >;
@@ -370,7 +370,7 @@
 		>;
 	};
 
-	pinctrl_i2c0_gpio: i2c0grp-gpio {
+	pinctrl_i2c0_gpio: i2c0-gpio-grp {
 		fsl,pins = <
 			VF610_PAD_PTB14__GPIO_36	0x31c2
 			VF610_PAD_PTB15__GPIO_37	0x31c2
@@ -392,7 +392,7 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debug-grp {
 		fsl,pins = <
 			 VF610_PAD_PTD20__GPIO_74	0x31c2
 			 >;
@@ -436,7 +436,7 @@
 		>;
 	};
 
-	pinctrl_usb_vbus: pinctrl-usb-vbus {
+	pinctrl_usb_vbus: pinctrl-usb-vbus-grp {
 		fsl,pins = <
 			VF610_PAD_PTA16__GPIO_6	0x31c2
 		>;
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
index 040a1f8b6130..8020a644dd9d 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
@@ -23,7 +23,7 @@
 		pinctrl-0 = <&pinctrl_leds_debug>;
 		pinctrl-names = "default";
 
-		debug {
+		led-debug {
 			label = "zii:green:debug1";
 			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -47,19 +47,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0: switch0@0 {
+			switch0: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 0>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
+					ethernet-port@0 {
 						reg = <0>;
-						label = "cpu";
+						phy-mode = "rmii";
 						ethernet = <&fec1>;
 
 						fixed-link {
@@ -68,37 +68,37 @@
 						};
 					};
 
-					port@1 {
+					ethernet-port@1 {
 						reg = <1>;
 						label = "aib2main_1";
 					};
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "aib2main_2";
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_cu_1000_5";
 					};
 
-					port@4 {
+					ethernet-port@4 {
 						reg = <4>;
 						label = "eth_cu_1000_6";
 					};
 
-					port@5 {
+					ethernet-port@5 {
 						reg = <5>;
 						label = "eth_cu_1000_4";
 					};
 
-					port@6 {
+					ethernet-port@6 {
 						reg = <6>;
 						label = "eth_cu_1000_7";
 					};
 
-					port@7 {
+					ethernet-port@7 {
 						reg = <7>;
 						label = "modem_pic";
 
@@ -108,13 +108,18 @@
 						};
 					};
 
-					switch0port10: port@10 {
+					switch0port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "xgmii";
 						link = <&switch1port10
 							&switch3port10
 							&switch2port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 			};
@@ -125,44 +130,54 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch1: switch1@0 {
+			switch1: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 1>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@1 {
+					ethernet-port@1 {
 						reg = <1>;
 						label = "eth_cu_1000_3";
 					};
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "eth_cu_100_2";
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_cu_100_3";
 					};
 
-					switch1port9: port@9 {
+					switch1port9: ethernet-port@9 {
 						reg = <9>;
 						label = "dsa";
 						phy-mode = "xgmii";
 						link = <&switch3port10
 							&switch2port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 
-					switch1port10: port@10 {
+					switch1port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "xgmii";
 						link = <&switch0port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 			};
@@ -173,17 +188,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch2: switch2@0 {
+			switch2: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 2>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "eth_fc_1000_2";
 						phy-mode = "1000base-x";
@@ -191,7 +206,7 @@
 						sfp = <&sff1>;
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_fc_1000_3";
 						phy-mode = "1000base-x";
@@ -199,7 +214,7 @@
 						sfp = <&sff2>;
 					};
 
-					port@4 {
+					ethernet-port@4 {
 						reg = <4>;
 						label = "eth_fc_1000_4";
 						phy-mode = "1000base-x";
@@ -207,7 +222,7 @@
 						sfp = <&sff3>;
 					};
 
-					port@5 {
+					ethernet-port@5 {
 						reg = <5>;
 						label = "eth_fc_1000_5";
 						phy-mode = "1000base-x";
@@ -215,7 +230,7 @@
 						sfp = <&sff4>;
 					};
 
-					port@6 {
+					ethernet-port@6 {
 						reg = <6>;
 						label = "eth_fc_1000_6";
 						phy-mode = "1000base-x";
@@ -223,7 +238,7 @@
 						sfp = <&sff5>;
 					};
 
-					port@7 {
+					ethernet-port@7 {
 						reg = <7>;
 						label = "eth_fc_1000_7";
 						phy-mode = "1000base-x";
@@ -231,7 +246,7 @@
 						sfp = <&sff6>;
 					};
 
-					port@9 {
+					ethernet-port@9 {
 						reg = <9>;
 						label = "eth_fc_1000_1";
 						phy-mode = "1000base-x";
@@ -239,13 +254,18 @@
 						sfp = <&sff0>;
 					};
 
-					switch2port10: port@10 {
+					switch2port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "2500base-x";
 						link = <&switch3port9
 							&switch1port9
 							&switch0port10>;
+
+						fixed-link {
+							speed = <2500>;
+							full-duplex;
+						};
 					};
 				};
 			};
@@ -256,17 +276,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch3: switch3@0 {
+			switch3: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 3>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "eth_fc_1000_8";
 						phy-mode = "1000base-x";
@@ -274,7 +294,7 @@
 						sfp = <&sff7>;
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_fc_1000_9";
 						phy-mode = "1000base-x";
@@ -282,7 +302,7 @@
 						sfp = <&sff8>;
 					};
 
-					port@4 {
+					ethernet-port@4 {
 						reg = <4>;
 						label = "eth_fc_1000_10";
 						phy-mode = "1000base-x";
@@ -290,19 +310,29 @@
 						sfp = <&sff9>;
 					};
 
-					switch3port9: port@9 {
+					switch3port9: ethernet-port@9 {
 						reg = <9>;
 						label = "dsa";
 						phy-mode = "2500base-x";
 						link = <&switch2port10>;
+
+						fixed-link {
+							speed = <2500>;
+							full-duplex;
+						};
 					};
 
-					switch3port10: port@10 {
+					switch3port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "xgmii";
 						link = <&switch1port9
 							&switch0port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 			};
@@ -553,7 +583,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	gpio9: io-expander@20 {
+	gpio9: pinctrl@20 {
 		compatible = "semtech,sx1503q";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sx1503_20>;
@@ -593,7 +623,6 @@
 
 	i2c-mux@70 {
 		compatible = "nxp,pca9548";
-		pinctrl-names = "default";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x70>;
@@ -632,7 +661,6 @@
 
 	i2c-mux@71 {
 		compatible = "nxp,pca9548";
-		pinctrl-names = "default";
 		reg = <0x71>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -717,7 +745,7 @@
 		>;
 	};
 
-	pinctrl_dspi2: dspi2gpio {
+	pinctrl_dspi2: dspi2gpiogrp {
 		fsl,pins = <
 			VF610_PAD_PTD30__GPIO_64		0x33e2
 			VF610_PAD_PTD29__GPIO_65		0x33e1
@@ -789,13 +817,13 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debuggrp {
 		fsl,pins = <
 			 VF610_PAD_PTB26__GPIO_96		0x31c2
 		   >;
 	};
 
-	pinctrl_mdio_mux: pinctrl-mdio-mux {
+	pinctrl_mdio_mux: pinctrl-mdio-muxgrp {
 		fsl,pins = <
 			VF610_PAD_PTE27__GPIO_132		0x31c2
 			VF610_PAD_PTE28__GPIO_133		0x31c2
@@ -815,7 +843,7 @@
 		>;
 	};
 
-	pinctrl_sx1503_20: pinctrl-sx1503-20 {
+	pinctrl_sx1503_20: pinctrl-sx1503-20grp {
 		fsl,pins = <
 			VF610_PAD_PTD31__GPIO_63		0x219d
 			>;
diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts
index 6c6ec46fd015..423d185c971f 100644
--- a/arch/arm/boot/dts/vf610-zii-spb4.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts
@@ -123,7 +123,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6190";
 			pinctrl-0 = <&pinctrl_gpio_switch0>;
 			pinctrl-names = "default";
@@ -134,13 +134,13 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
-					label = "cpu";
+					phy-mode = "rmii";
 					ethernet = <&fec1>;
 
 					fixed-link {
@@ -149,32 +149,32 @@
 					};
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "eth_cu_1000_2";
 				};
 
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "eth_cu_1000_3";
 				};
 
-				port@4 {
+				ethernet-port@4 {
 					reg = <4>;
 					label = "eth_cu_1000_4";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_cu_1000_5";
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					label = "eth_cu_1000_6";
 				};
@@ -241,7 +241,7 @@
 	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu2";
 		current-speed = <1000000>;
 		#address-cells = <1>;
@@ -323,7 +323,7 @@
 		>;
 	};
 
-	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0grp {
 		fsl,pins = <
 			VF610_PAD_PTB28__GPIO_98		0x219d
 		>;
@@ -343,7 +343,7 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debuggrp {
 		fsl,pins = <
 			VF610_PAD_PTD3__GPIO_82			0x31c2
 		>;
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
index 73fdace4cb42..d5c7f710c314 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
@@ -112,7 +112,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6190";
 			pinctrl-0 = <&pinctrl_gpio_switch0>;
 			pinctrl-names = "default";
@@ -123,13 +123,13 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
-					label = "cpu";
+					phy-mode = "rmii";
 					ethernet = <&fec1>;
 
 					fixed-link {
@@ -138,27 +138,27 @@
 					};
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_100_3";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_cu_1000_4";
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					label = "eth_cu_1000_5";
 				};
 
-				port@8 {
+				ethernet-port@8 {
 					reg = <8>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@9 {
+				ethernet-port@9 {
 					reg = <9>;
 					label = "eth_cu_1000_2";
 					phy-handle = <&phy9>;
@@ -167,12 +167,12 @@
 				};
 			};
 
-			mdio1 {
+			mdio-external {
 				compatible = "marvell,mv88e6xxx-mdio-external";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				phy9: phy9@0 {
+				phy9: ethernet-phy@0 {
 					compatible = "ethernet-phy-ieee802.3-c45";
 					pinctrl-0 = <&pinctrl_gpio_phy9>;
 					pinctrl-names = "default";
@@ -284,13 +284,13 @@
 		>;
 	};
 
-	pinctrl_gpio_phy9: pinctrl-gpio-phy9 {
+	pinctrl_gpio_phy9: pinctrl-gpio-phy9grp {
 		fsl,pins = <
 			VF610_PAD_PTB24__GPIO_94		0x219d
 		>;
 	};
 
-	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0grp {
 		fsl,pins = <
 			VF610_PAD_PTB28__GPIO_98		0x219d
 		>;
@@ -310,7 +310,7 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debuggrp {
 		fsl,pins = <
 			VF610_PAD_PTD3__GPIO_82			0x31c2
 		>;
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts
index fe600ab2e4bd..344cc2b4d0ad 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts
@@ -137,7 +137,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6190";
 			pinctrl-0 = <&pinctrl_gpio_switch0>;
 			pinctrl-names = "default";
@@ -148,13 +148,13 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
-					label = "cpu";
+					phy-mode = "rmii";
 					ethernet = <&fec1>;
 
 					fixed-link {
@@ -163,32 +163,32 @@
 					};
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "eth_cu_1000_2";
 				};
 
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "eth_cu_1000_3";
 				};
 
-				port@4 {
+				ethernet-port@4 {
 					reg = <4>;
 					label = "eth_cu_1000_4";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_cu_1000_5";
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					label = "eth_cu_1000_6";
 				};
@@ -254,7 +254,7 @@
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu2";
 		current-speed = <1000000>;
 		#address-cells = <1>;
@@ -330,7 +330,7 @@
 		>;
 	};
 
-	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0grp {
 		fsl,pins = <
 			VF610_PAD_PTB28__GPIO_98		0x219d
 		>;
@@ -350,7 +350,7 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debuggrp {
 		fsl,pins = <
 			VF610_PAD_PTD3__GPIO_82			0x31c2
 		>;
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/nxp/vf/vf610.dtsi
index 956182d08e74..2fba923821d0 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf610.dtsi
@@ -2,7 +2,6 @@
 //
 // Copyright 2013 Freescale Semiconductor, Inc.
 
-
 #include "vf500.dtsi"
 
 &a5_cpu {
diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts
index 2c2db47af441..86d32f54c250 100644
--- a/arch/arm/boot/dts/vf610m4-colibri.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts
@@ -50,14 +50,12 @@
 };
 
 &iomuxc {
-	vf610-colibri {
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				VF610_PAD_PTD0__UART2_TX		0x21a2
-				VF610_PAD_PTD1__UART2_RX		0x21a1
-				VF610_PAD_PTD2__UART2_RTS		0x21a2
-				VF610_PAD_PTD3__UART2_CTS		0x21a1
-			>;
-		};
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTD0__UART2_TX		0x21a2
+			VF610_PAD_PTD1__UART2_RX		0x21a1
+			VF610_PAD_PTD2__UART2_RTS		0x21a2
+			VF610_PAD_PTD3__UART2_CTS		0x21a1
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/vf610m4-cosmic.dts b/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts
index f7474c11aabd..454b484368cb 100644
--- a/arch/arm/boot/dts/vf610m4-cosmic.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts
@@ -79,12 +79,10 @@
 };
 
 &iomuxc {
-	vf610-cosmic {
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				VF610_PAD_PTA20__UART3_TX		0x21a2
-				VF610_PAD_PTA21__UART3_RX		0x21a1
-			>;
-		};
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			VF610_PAD_PTA20__UART3_TX		0x21a2
+			VF610_PAD_PTA21__UART3_RX		0x21a1
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/vf610m4.dtsi b/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi
index 76bbfd5e32b6..648d219e1d0e 100644
--- a/arch/arm/boot/dts/vf610m4.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi
@@ -42,7 +42,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "armv7-m.dtsi"
+#include "../../armv7-m.dtsi"
 #include "vfxxx.dtsi"
 
 / {
@@ -55,3 +55,7 @@
 &mscm_ir {
 	interrupt-parent = <&nvic>;
 };
+
+&nvic {
+	arm,num-irq-priority-bits = <4>;
+};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
index d53f9c9db8bf..568d81807c81 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
@@ -111,8 +111,7 @@
 				interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART0>;
 				clock-names = "ipg";
-				dmas = <&edma0 0 2>,
-					<&edma0 0 3>;
+				dmas = <&edma0 0 2>, <&edma0 0 3>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
@@ -123,8 +122,7 @@
 				interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART1>;
 				clock-names = "ipg";
-				dmas = <&edma0 0 4>,
-					<&edma0 0 5>;
+				dmas = <&edma0 0 4>, <&edma0 0 5>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
@@ -135,8 +133,7 @@
 				interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART2>;
 				clock-names = "ipg";
-				dmas = <&edma0 0 6>,
-					<&edma0 0 7>;
+				dmas = <&edma0 0 6>, <&edma0 0 7>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
@@ -147,8 +144,7 @@
 				interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART3>;
 				clock-names = "ipg";
-				dmas = <&edma0 0 8>,
-					<&edma0 0 9>;
+				dmas = <&edma0 0 8>, <&edma0 0 9>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
@@ -162,9 +158,8 @@
 				clocks = <&clks VF610_CLK_DSPI0>;
 				clock-names = "dspi";
 				spi-num-chipselects = <6>;
-				dmas = <&edma1 1 12>,
-					<&edma1 1 13>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 1 13>, <&edma1 1 12>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -177,9 +172,8 @@
 				clocks = <&clks VF610_CLK_DSPI1>;
 				clock-names = "dspi";
 				spi-num-chipselects = <4>;
-				dmas = <&edma1 1 14>,
-					<&edma1 1 15>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 1 15>, <&edma1 1 14>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -191,9 +185,8 @@
 					<&clks VF610_CLK_SAI0_DIV>,
 					<&clks 0>, <&clks 0>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "tx", "rx";
-				dmas = <&edma0 0 17>,
-					<&edma0 0 16>;
+				dma-names = "rx", "tx";
+				dmas = <&edma0 0 16>, <&edma0 0 17>;
 				status = "disabled";
 			};
 
@@ -205,9 +198,8 @@
 					<&clks VF610_CLK_SAI1_DIV>,
 					<&clks 0>, <&clks 0>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "tx", "rx";
-				dmas = <&edma0 0 19>,
-					<&edma0 0 18>;
+				dma-names = "rx", "tx";
+				dmas = <&edma0 0 18>, <&edma0 0 19>;
 				status = "disabled";
 			};
 
@@ -219,9 +211,8 @@
 					<&clks VF610_CLK_SAI2_DIV>,
 					<&clks 0>, <&clks 0>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "tx", "rx";
-				dmas = <&edma0 0 21>,
-					<&edma0 0 20>;
+				dma-names = "rx", "tx";
+				dmas = <&edma0 0 20>, <&edma0 0 21>;
 				status = "disabled";
 			};
 
@@ -233,9 +224,8 @@
 					<&clks VF610_CLK_SAI3_DIV>,
 					<&clks 0>, <&clks 0>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "tx", "rx";
-				dmas = <&edma0 1 9>,
-					<&edma0 1 8>;
+				dma-names = "rx", "tx";
+				dmas = <&edma0 1 8>, <&edma0 1 9>;
 				status = "disabled";
 			};
 
@@ -298,7 +288,6 @@
 				reg = <0x4003e000 0x1000>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_WDT>;
-				clock-names = "wdog";
 				status = "disabled";
 			};
 
@@ -315,7 +304,7 @@
 				status = "disabled";
 			};
 
-			iomuxc: iomuxc@40048000 {
+			iomuxc: pinctrl@40048000 {
 				compatible = "fsl,vf610-iomuxc";
 				reg = <0x40048000 0x1000>;
 			};
@@ -329,6 +318,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 0 32>;
+				ngpios = <32>;
 			};
 
 			gpio1: gpio@4004a000 {
@@ -340,6 +330,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 32 32>;
+				ngpios = <32>;
 			};
 
 			gpio2: gpio@4004b000 {
@@ -351,6 +342,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 64 32>;
+				ngpios = <32>;
 			};
 
 			gpio3: gpio@4004c000 {
@@ -362,6 +354,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 96 32>;
+				ngpios = <32>;
 			};
 
 			gpio4: gpio@4004d000 {
@@ -373,6 +366,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 128 7>;
+				ngpios = <7>;
 			};
 
 			anatop: anatop@40050000 {
@@ -431,8 +425,7 @@
 				interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_I2C1>;
 				clock-names = "ipg";
-				dmas = <&edma0 0 52>,
-					<&edma0 0 53>;
+				dmas = <&edma0 0 52>, <&edma0 0 53>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
@@ -541,9 +534,8 @@
 				clocks = <&clks VF610_CLK_DSPI2>;
 				clock-names = "dspi";
 				spi-num-chipselects = <2>;
-				dmas = <&edma1 0 10>,
-					<&edma1 0 11>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 0 11>, <&edma1 0 10>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -556,9 +548,8 @@
 				clocks = <&clks VF610_CLK_DSPI3>;
 				clock-names = "dspi";
 				spi-num-chipselects = <2>;
-				dmas = <&edma1 0 12>,
-					<&edma1 0 13>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 0 13>, <&edma1 0 12>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -574,7 +565,7 @@
 							<20000000>;
 			};
 
-			esdhc0: esdhc@400b1000 {
+			esdhc0: mmc@400b1000 {
 				compatible = "fsl,imx53-esdhc";
 				reg = <0x400b1000 0x1000>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
@@ -585,7 +576,7 @@
 				status = "disabled";
 			};
 
-			esdhc1: esdhc@400b2000 {
+			esdhc1: mmc@400b2000 {
 				compatible = "fsl,imx53-esdhc";
 				reg = <0x400b2000 0x1000>;
 				interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
@@ -617,7 +608,7 @@
 
 			ftm: ftm@400b8000 {
 				compatible = "fsl,ftm-timer";
-				reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+				reg = <0x400b8000 0x1000>, <0x400b9000 0x1000>;
 				interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "ftm-evt", "ftm-src",
 					"ftm-evt-counter-en", "ftm-src-counter-en";
@@ -691,7 +682,7 @@
 				status = "disabled";
 			};
 
-			nfc: nand@400e0000 {
+			nfc: nand-controller@400e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-nfc";
@@ -724,8 +715,7 @@
 				interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_I2C3>;
 				clock-names = "ipg";
-				dmas = <&edma0 1 38>,
-					<&edma0 1 39>;
+				dmas = <&edma0 1 38>, <&edma0 1 39>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
@@ -739,13 +729,13 @@
 				clocks = <&clks VF610_CLK_CAAM>;
 				clock-names = "ipg";
 
-				sec_jr0: jr0@1000 {
+				sec_jr0: jr@1000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x1000 0x1000>;
 					interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr1: jr1@2000 {
+				sec_jr1: jr@2000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x2000 0x1000>;
 					interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
deleted file mode 100644
index 0482676d1830..000000000000
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ /dev/null
@@ -1,231 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "omap-zoom-common.dtsi"
-
-/ {
-	model = "TI Zoom3";
-	compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap36xx", "ti,omap3";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
-
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-};
-
-&omap3_pmx_core {
-	/* REVISIT: twl gpio0 is mmc0_cd */
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 WLAN IRQ */
-			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs1.sdmmc3_cmd */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
-                        OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
-                        OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
-                        OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-                        OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-                        OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
-                        OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-                        OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-                        OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-                        OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	/* wl12xx GPIO output for WLAN_EN */
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x211a, PIN_OUTPUT| MUX_MODE4)		/* cam_d2.gpio_101 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	mmc3_2_pins: pinmux_mmc3_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
-			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
-			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d5.sdmmc3_dat1 */
-			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
-			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
-		>;
-	};
-};
-
-&omap3_pmx_wkup {
-	wlan_host_wkup: pinmux_wlan_host_wkup_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-#include "twl4030.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-
-	/*
-	 * TVP5146 Video decoder-in for analog input support.
-	 */
-	tvp5146@5c {
-		compatible = "ti,tvp5146m2";
-		reg = <0x5c>;
-	};
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vqmmc-supply = <&vsim>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-};
-/*
-&mmc2 {
-	vmmc-supply = <&vmmc2>;
-	ti,non-removable;
-	bus-width = <8>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-};
-*/
-&mmc3 {
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins &mmc3_2_pins>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 162 */
-		ref-clock-frequency = <26000000>;
-	};
-};
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_pins>;
-};
-
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart3_pins>;
-};
-
-&uart4 {
-       status = "disabled";
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	mode = <3>;
-	power = <50>;
-};
diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
deleted file mode 100644
index 4d7eeb133dad..000000000000
--- a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP4/5 SoC CPU thermal
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-cpu_thermal: cpu_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <1000>; /* milliseconds */
-
-			/* sensor       ID */
-        thermal-sensors = <&bandgap     0>;
-
-	cpu_trips: trips {
-                cpu_alert0: cpu_alert {
-                        temperature = <100000>; /* millicelsius */
-                        hysteresis = <2000>; /* millicelsius */
-                        type = "passive";
-                };
-                cpu_crit: cpu_crit {
-                        temperature = <125000>; /* millicelsius */
-                        hysteresis = <2000>; /* millicelsius */
-                        type = "critical";
-                };
-        };
-
-	cpu_cooling_maps: cooling-maps {
-		map0 {
-			trip = <&cpu_alert0>;
-			cooling-device =
-				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
deleted file mode 100644
index 7c6886cd738f..000000000000
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap4460.dtsi"
-#include "omap4-panda-common.dtsi"
-
-/ {
-	model = "TI OMAP4 PandaBoard-ES";
-	compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4";
-};
-
-/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
-&sound {
-	ti,model = "PandaBoardES";
-
-	/* Audio routing */
-	ti,audio-routing =
-		"Headset Stereophone", "HSOL",
-		"Headset Stereophone", "HSOR",
-		"Ext Spk", "HFL",
-		"Ext Spk", "HFR",
-		"Line Out", "AUXL",
-		"Line Out", "AUXR",
-		"AFML", "Line In",
-		"AFMR", "Line In";
-};
-
-/* PandaboardES has external pullups on SCL & SDA */
-&dss_hdmi_pins {
-	pinctrl-single,pins = <
-		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
-		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
-		>;
-};
-
-&omap4_pmx_core {
-	led_gpio_pins: gpio_led_pmx {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
-		>;
-	};
-
-	bt_pins: pinmux_bt_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 - BTEN */
-			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 - BTWAKEUP */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts - HCI */
-			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-};
-
-&led_wkgpio_pins {
-	pinctrl-single,pins = <
-		OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
-	>;
-};
-
-&leds {
-	pinctrl-0 = <
-		&led_gpio_pins
-		&led_wkgpio_pins
-	>;
-
-	heartbeat {
-		gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
-	};
-	mmc {
-		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&gpio_keys {
-	buttonS2 {
-		gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* gpio_113 */
-	};
-};
-
-&gpio1_target {
-	 ti,no-reset-on-init;
-};
-
-&wl12xx_gpio {
-	pinctrl-single,pins = <
-		OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
-		OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
-	>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins &bt_pins>;
-	bluetooth: tiwi {
-		compatible = "ti,wl1271-st";
-		enable-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;	/* GPIO_46 */
-	};
-};
diff --git a/arch/arm/boot/dts/ox810se-wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts
deleted file mode 100644
index c59e06ff2423..000000000000
--- a/arch/arm/boot/dts/ox810se-wd-mbwe.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-/dts-v1/;
-#include "ox810se.dtsi"
-
-/ {
-	model = "Western Digital My Book World Edition";
-
-	compatible = "wd,mbwe", "oxsemi,ox810se";
-
-	chosen {
-		bootargs = "console=ttyS1,115200n8 earlyprintk=serial";
-	};
-
-	memory {
-		/* 128Mbytes DDR */
-		reg = <0x48000000 0x8000000>;
-	};
-
-	aliases {
-		serial1 = &uart1;
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		power {
-			label = "power";
-			gpios = <&gpio0 0 1>;
-			linux,code = <0x198>;
-		};
-
-		recovery {
-			label = "recovery";
-			gpios = <&gpio0 4 1>;
-			linux,code = <0xab>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		a0 {
-			label = "activity0";
-			gpios = <&gpio0 25 0>;
-			default-state = "keep";
-		};
-
-		a1 {
-			label = "activity1";
-			gpios = <&gpio0 26 0>;
-			default-state = "keep";
-		};
-
-		a2 {
-			label = "activity2";
-			gpios = <&gpio0 5 0>;
-			default-state = "keep";
-		};
-
-		a3 {
-			label = "activity3";
-			gpios = <&gpio0 6 0>;
-			default-state = "keep";
-		};
-
-		a4 {
-			label = "activity4";
-			gpios = <&gpio0 7 0>;
-			default-state = "keep";
-		};
-
-		a5 {
-			label = "activity5";
-			gpios = <&gpio1 2 0>;
-			default-state = "keep";
-		};
-	};
-
-	i2c-gpio {
-		compatible = "i2c-gpio";
-		gpios = <&gpio0 3 0 /* sda */
-			 &gpio0 2 0 /* scl */
-			 >;
-		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc0: rtc@48 {
-			compatible = "st,m41t00";
-			reg = <0x68>;
-		};
-	};
-};
-
-&etha {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-};
diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi
deleted file mode 100644
index 96c0745f7b70..000000000000
--- a/arch/arm/boot/dts/ox810se.dtsi
+++ /dev/null
@@ -1,357 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * ox810se.dtsi - Device tree file for Oxford Semiconductor OX810SE SoC
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include <dt-bindings/clock/oxsemi,ox810se.h>
-#include <dt-bindings/reset/oxsemi,ox810se.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "oxsemi,ox810se";
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-			clocks = <&armclk>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		/* Max 256MB @ 0x48000000 */
-		reg = <0x48000000 0x10000000>;
-	};
-
-	clocks {
-		osc: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		gmacclk: gmacclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		rpsclk: rpsclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <1>;
-			clock-mult = <1>;
-			clocks = <&osc>;
-		};
-
-		pll400: pll400 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <733333333>;
-		};
-
-		sysclk: sysclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clocks = <&pll400>;
-		};
-
-		armclk: armclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clocks = <&pll400>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&intc>;
-
-		etha: ethernet@40400000 {
-			compatible = "oxsemi,ox810se-dwmac", "snps,dwmac";
-			reg = <0x40400000 0x2000>;
-			interrupts = <8>;
-			interrupt-names = "macirq";
-			mac-address = [000000000000]; /* Filled in by U-Boot */
-			phy-mode = "rgmii";
-
-			clocks = <&stdclk 6>, <&gmacclk>;
-			clock-names = "gmac", "stmmaceth";
-			resets = <&reset 6>;
-
-			/* Regmap for sys registers */
-			oxsemi,sys-ctrl = <&sys>;
-
-			status = "disabled";
-		};
-
-		apb-bridge@44000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x44000000 0x1000000>;
-
-			pinctrl: pinctrl {
-				compatible = "oxsemi,ox810se-pinctrl";
-
-				/* Regmap for sys registers */
-				oxsemi,sys-ctrl = <&sys>;
-
-				pinctrl_uart0: uart0 {
-					uart0a {
-						pins = "gpio31";
-						function = "fct3";
-					};
-					uart0b {
-						pins = "gpio32";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart0_modem: uart0_modem {
-					uart0c {
-						pins = "gpio27";
-						function = "fct3";
-					};
-					uart0d {
-						pins = "gpio28";
-						function = "fct3";
-					};
-					uart0e {
-						pins = "gpio29";
-						function = "fct3";
-					};
-					uart0f {
-						pins = "gpio30";
-						function = "fct3";
-					};
-					uart0g {
-						pins = "gpio33";
-						function = "fct3";
-					};
-					uart0h {
-						pins = "gpio34";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart1: uart1 {
-					uart1a {
-						pins = "gpio20";
-						function = "fct3";
-					};
-					uart1b {
-						pins = "gpio22";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart1_modem: uart1_modem {
-					uart1c {
-						pins = "gpio8";
-						function = "fct3";
-					};
-					uart1d {
-						pins = "gpio9";
-						function = "fct3";
-					};
-					uart1e {
-						pins = "gpio23";
-						function = "fct3";
-					};
-					uart1f {
-						pins = "gpio24";
-						function = "fct3";
-					};
-					uart1g {
-						pins = "gpio25";
-						function = "fct3";
-					};
-					uart1h {
-						pins = "gpio26";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart2: uart2 {
-					uart2a {
-						pins = "gpio6";
-						function = "fct3";
-					};
-					uart2b {
-						pins = "gpio7";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart2_modem: uart2_modem {
-					uart2c {
-						pins = "gpio0";
-						function = "fct3";
-					};
-					uart2d {
-						pins = "gpio1";
-						function = "fct3";
-					};
-					uart2e {
-						pins = "gpio2";
-						function = "fct3";
-					};
-					uart2f {
-						pins = "gpio3";
-						function = "fct3";
-					};
-					uart2g {
-						pins = "gpio4";
-						function = "fct3";
-					};
-					uart2h {
-						pins = "gpio5";
-						function = "fct3";
-					};
-				};
-			};
-
-			gpio0: gpio@0 {
-				compatible = "oxsemi,ox810se-gpio";
-				reg = <0x000000 0x100000>;
-				interrupts = <21>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <32>;
-				oxsemi,gpio-bank = <0>;
-				gpio-ranges = <&pinctrl 0 0 32>;
-			};
-
-			gpio1: gpio@100000 {
-				compatible = "oxsemi,ox810se-gpio";
-				reg = <0x100000 0x100000>;
-				interrupts = <22>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <3>;
-				oxsemi,gpio-bank = <1>;
-				gpio-ranges = <&pinctrl 0 32 3>;
-			};
-
-			uart0: serial@200000 {
-			       compatible = "ns16550a";
-			       reg = <0x200000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <23>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART1>;
-			};
-
-			uart1: serial@300000 {
-			       compatible = "ns16550a";
-			       reg = <0x300000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <24>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART2>;
-			};
-
-			uart2: serial@900000 {
-			       compatible = "ns16550a";
-			       reg = <0x900000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <29>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART3>;
-			};
-
-			uart3: serial@a00000 {
-			       compatible = "ns16550a";
-			       reg = <0xa00000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <30>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART4>;
-			};
-		};
-
-		apb-bridge@45000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x45000000 0x1000000>;
-
-			sys: sys-ctrl@0 {
-				compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd";
-				reg = <0x000000 0x100000>;
-
-				reset: reset-controller {
-					compatible = "oxsemi,ox810se-reset";
-					#reset-cells = <1>;
-				};
-
-				stdclk: stdclk {
-					compatible = "oxsemi,ox810se-stdclk";
-					#clock-cells = <1>;
-				};
-			};
-
-			rps@300000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "simple-bus";
-				ranges = <0 0x300000 0x100000>;
-
-				intc: interrupt-controller@0 {
-					compatible = "oxsemi,ox810se-rps-irq";
-					interrupt-controller;
-					reg = <0 0x200>;
-					#interrupt-cells = <1>;
-					valid-mask = <0xffffffff>;
-					clear-mask = <0xffffffff>;
-				};
-
-				timer0: timer@200 {
-					compatible = "oxsemi,ox810se-rps-timer";
-					reg = <0x200 0x40>;
-					clocks = <&rpsclk>;
-					interrupts = <4 5>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
deleted file mode 100644
index c3daceccde55..000000000000
--- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-/dts-v1/;
-#include "ox820.dtsi"
-
-/ {
-	model = "Cloud Engines PogoPlug Series 3";
-
-	compatible = "cloudengines,pogoplugv3", "oxsemi,ox820";
-
-	chosen {
-		bootargs = "earlyprintk";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		/* 128Mbytes DDR */
-		reg = <0x60000000 0x8000000>;
-	};
-
-	aliases {
-		serial0 = &uart0;
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		blue {
-			label = "pogoplug:blue";
-			gpios = <&gpio0 2 0>;
-			default-state = "keep";
-		};
-
-		orange {
-			label = "pogoplug:orange";
-			gpios = <&gpio1 16 1>;
-			default-state = "keep";
-		};
-
-		green {
-			label = "pogoplug:green";
-			gpios = <&gpio1 17 1>;
-			default-state = "keep";
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart0>;
-};
-
-&nandc {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-
-	nand@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		nand-ecc-mode = "soft";
-		nand-ecc-algo = "hamming";
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x00e00000>;
-			read-only;
-		};
-
-		partition@e00000 {
-			label = "ubi";
-			reg = <0x00e00000 0x07200000>;
-		};
-	};
-};
-
-&etha {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_etha_mdio>;
-};
diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi
deleted file mode 100644
index dde4364892bf..000000000000
--- a/arch/arm/boot/dts/ox820.dtsi
+++ /dev/null
@@ -1,299 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * ox820.dtsi - Device tree file for Oxford Semiconductor OX820 SoC
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/oxsemi,ox820.h>
-#include <dt-bindings/reset/oxsemi,ox820.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "oxsemi,ox820";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "oxsemi,ox820-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm11mpcore";
-			clocks = <&armclk>;
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,arm11mpcore";
-			clocks = <&armclk>;
-			reg = <1>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		/* Max 512MB @ 0x60000000 */
-		reg = <0x60000000 0x20000000>;
-	};
-
-	clocks {
-		osc: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		gmacclk: gmacclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		sysclk: sysclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clocks = <&osc>;
-		};
-
-		plla: plla {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <850000000>;
-		};
-
-		armclk: armclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clocks = <&plla>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&gic>;
-
-		nandc: nand-controller@41000000 {
-			compatible = "oxsemi,ox820-nand";
-			reg = <0x41000000 0x100000>;
-			clocks = <&stdclk CLK_820_NAND>;
-			resets = <&reset RESET_NAND>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		etha: ethernet@40400000 {
-			compatible = "oxsemi,ox820-dwmac", "snps,dwmac";
-			reg = <0x40400000 0x2000>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq", "eth_wake_irq";
-			mac-address = [000000000000]; /* Filled in by U-Boot */
-			phy-mode = "rgmii";
-
-			clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>;
-			clock-names = "gmac", "stmmaceth";
-			resets = <&reset RESET_MAC>;
-
-			/* Regmap for sys registers */
-			oxsemi,sys-ctrl = <&sys>;
-
-			status = "disabled";
-		};
-
-		apb-bridge@44000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x44000000 0x1000000>;
-
-			pinctrl: pinctrl {
-				compatible = "oxsemi,ox820-pinctrl";
-
-				/* Regmap for sys registers */
-				oxsemi,sys-ctrl = <&sys>;
-
-				pinctrl_uart0: uart0 {
-					uart0 {
-						pins = "gpio30", "gpio31";
-						function = "fct5";
-					};
-				};
-
-				pinctrl_uart0_modem: uart0_modem {
-					uart0_modem_a {
-						pins = "gpio24", "gpio24", "gpio26", "gpio27";
-						function = "fct4";
-					};
-					uart0_modem_b {
-						pins = "gpio28", "gpio29";
-						function = "fct5";
-					};
-				};
-
-				pinctrl_uart1: uart1 {
-					uart1 {
-						pins = "gpio7", "gpio8";
-						function = "fct4";
-					};
-				};
-
-				pinctrl_uart1_modem: uart1_modem {
-					uart1_modem {
-						pins = "gpio5", "gpio6", "gpio40", "gpio41", "gpio42", "gpio43";
-						function = "fct4";
-					};
-				};
-
-				pinctrl_etha_mdio: etha_mdio {
-					etha_mdio {
-						pins = "gpio3", "gpio4";
-						function = "fct1";
-					};
-				};
-
-				pinctrl_nand: nand {
-					nand {
-						pins = "gpio12", "gpio13", "gpio14", "gpio15",
-						     "gpio16", "gpio17", "gpio18", "gpio19",
-						     "gpio20", "gpio21", "gpio22", "gpio23",
-						     "gpio24";
-						function = "fct1";
-					};
-				};
-			};
-
-			gpio0: gpio@0 {
-				compatible = "oxsemi,ox820-gpio";
-				reg = <0x000000 0x100000>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <32>;
-				oxsemi,gpio-bank = <0>;
-				gpio-ranges = <&pinctrl 0 0 32>;
-			};
-
-			gpio1: gpio@100000 {
-				compatible = "oxsemi,ox820-gpio";
-				reg = <0x100000 0x100000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <18>;
-				oxsemi,gpio-bank = <1>;
-				gpio-ranges = <&pinctrl 0 32 18>;
-			};
-
-			uart0: serial@200000 {
-			       compatible = "ns16550a";
-			       reg = <0x200000 0x100000>;
-			       interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       clocks = <&sysclk>;
-			       resets = <&reset RESET_UART1>;
-			};
-
-			uart1: serial@300000 {
-			       compatible = "ns16550a";
-			       reg = <0x200000 0x100000>;
-			       interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       clocks = <&sysclk>;
-			       resets = <&reset RESET_UART2>;
-			};
-
-			rps@400000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "simple-bus";
-				ranges = <0 0x400000 0x100000>;
-
-				intc: interrupt-controller@0 {
-					compatible = "oxsemi,ox820-rps-irq", "oxsemi,ox810se-rps-irq";
-					interrupt-controller;
-					reg = <0 0x200>;
-					interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-					#interrupt-cells = <1>;
-					valid-mask = <0xffffffff>;
-					clear-mask = <0xffffffff>;
-				};
-
-				timer0: timer@200 {
-					compatible = "oxsemi,ox820-rps-timer";
-					reg = <0x200 0x40>;
-					clocks = <&sysclk>;
-					interrupt-parent = <&intc>;
-					interrupts = <4>;
-				};
-			};
-
-			sys: sys-ctrl@e00000 {
-				compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd";
-				reg = <0xe00000 0x200000>;
-
-				reset: reset-controller {
-					compatible = "oxsemi,ox820-reset", "oxsemi,ox810se-reset";
-					#reset-cells = <1>;
-				};
-
-				stdclk: stdclk {
-					compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk";
-					#clock-cells = <1>;
-				};
-			};
-		};
-
-		apb-bridge@47000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x47000000 0x1000000>;
-
-			scu: scu@0 {
-				compatible = "arm,arm11mp-scu";
-				reg = <0x0 0x100>;
-			};
-
-			local-timer@600 {
-				compatible = "arm,arm11mp-twd-timer";
-				reg = <0x600 0x20>;
-				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>;
-				clocks = <&armclk>;
-			};
-
-			gic: interrupt-controller@1000 {
-				compatible = "arm,arm11mp-gic";
-				interrupt-controller;
-				#interrupt-cells = <3>;
-				reg = <0x1000 0x1000>,
-				      <0x100 0x500>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
deleted file mode 100644
index 70a1dd629c7a..000000000000
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ /dev/null
@@ -1,942 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
-#include "qcom-msm8660.dtsi"
-
-/ {
-	model = "Qualcomm APQ8060 Dragonboard";
-	compatible = "qcom,apq8060-dragonboard", "qcom,msm8660";
-
-	aliases {
-		serial0 = &gsbi12_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		/* Main power of the board: 3.7V */
-		vph: regulator-fixed {
-			compatible = "regulator-fixed";
-			regulator-min-microvolt = <3700000>;
-			regulator-max-microvolt = <3700000>;
-			regulator-name = "VPH";
-			regulator-type = "voltage";
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		/* GPIO controlled ethernet power regulator */
-		dragon_veth: xc622a331mrg {
-			compatible = "regulator-fixed";
-			regulator-name = "XC6222A331MR-G";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			vin-supply = <&vph>;
-			gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			pinctrl-names = "default";
-			pinctrl-0 = <&dragon_veth_gpios>;
-			regulator-always-on;
-		};
-
-		/* VDDvario fixed regulator */
-		dragon_vario: nds332p {
-			compatible = "regulator-fixed";
-			regulator-name = "NDS332P";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			vin-supply = <&pm8058_s3>;
-		};
-
-		/* This is a levelshifter for SDCC5 */
-		dragon_vio_txb: txb0104rgyr {
-			compatible = "regulator-fixed";
-			regulator-name = "Dragon SDCC levelshifter";
-			vin-supply = <&pm8058_l14>;
-			regulator-always-on;
-		};
-	};
-
-	/*
-	 * Capella CM3605 light and proximity sensor mounted directly
-	 * on the sensor board.
-	 */
-	cm3605 {
-		compatible = "capella,cm3605";
-		vdd-supply = <&pm8058_l14>; // 2.85V
-		aset-gpios = <&pm8058_gpio 35 GPIO_ACTIVE_LOW>;
-		capella,aset-resistance-ohms = <100000>;
-		/* Trig on both edges - getting close or far away */
-		interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
-		/* MPP05 analog input to the XOADC */
-		io-channels = <&xoadc 0x00 0x05>;
-		io-channel-names = "aout";
-		pinctrl-names = "default";
-		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
-	};
-
-	soc {
-		pinctrl@800000 {
-			/* eMMC pins, all 8 data lines connected */
-			dragon_sdcc1_pins: sdcc1 {
-				mux {
-					pins = "gpio159", "gpio160", "gpio161",
-					     "gpio162", "gpio163", "gpio164",
-					     "gpio165", "gpio166", "gpio167",
-					     "gpio168";
-					     function = "sdc1";
-				};
-				clk {
-					pins = "gpio167"; /* SDC1 CLK */
-					drive-strength = <16>;
-					bias-disable;
-				};
-				cmd {
-					pins = "gpio168"; /* SDC1 CMD */
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-				data {
-					/* SDC1 D0 to D7 */
-					pins = "gpio159", "gpio160", "gpio161", "gpio162",
-					     "gpio163", "gpio164", "gpio165", "gpio166";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
-
-			/*
-			 * The SDCC3 pins are hardcoded (non-muxable) but need some pin
-			 * configuration.
-			 */
-			dragon_sdcc3_pins: sdcc3 {
-				clk {
-					pins = "sdc3_clk";
-					drive-strength = <8>;
-					bias-disable;
-				};
-				cmd {
-					pins = "sdc3_cmd";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				data {
-					pins = "sdc3_data";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
-
-			/* Second SD card slot pins */
-			dragon_sdcc5_pins: sdcc5 {
-				mux {
-					pins = "gpio95", "gpio96", "gpio97",
-					    "gpio98", "gpio99", "gpio100";
-					function = "sdc5";
-				};
-				clk {
-					pins = "gpio97"; /* SDC5 CLK */
-					drive-strength = <16>;
-					bias-disable;
-				};
-				cmd {
-					pins = "gpio95"; /* SDC5 CMD */
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-				data {
-					/* SDC5 D0 to D3 */
-					pins = "gpio96", "gpio98", "gpio99", "gpio100";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
-
-			dragon_gsbi8_i2c_pins: gsbi8_i2c {
-				mux {
-					pins = "gpio64", "gpio65";
-					function = "gsbi8";
-				};
-				pinconf {
-					pins = "gpio64", "gpio65";
-					drive-strength = <16>;
-					/* These have external pull-up 2.2kOhm to 1.8V */
-					bias-disable;
-				};
-			};
-
-			dragon_gsbi12_i2c_pins: gsbi12_i2c {
-				mux {
-					pins = "gpio115", "gpio116";
-					function = "gsbi12";
-				};
-				pinconf {
-					pins = "gpio115", "gpio116";
-					drive-strength = <16>;
-					/* These have external pull-up 4.7kOhm to 1.8V */
-					bias-disable;
-				};
-			};
-
-			/* Primary serial port uart 0 pins */
-			dragon_gsbi12_serial_pins: gsbi12_serial {
-				mux {
-					pins = "gpio117", "gpio118";
-					function = "gsbi12";
-				};
-				tx {
-					pins = "gpio117";
-					drive-strength = <8>;
-					bias-disable;
-				};
-				rx {
-					pins = "gpio118";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			dragon_ebi2_pins: ebi2 {
-				/*
-				 * Pins used by EBI2 on the Dragonboard, actually only
-				 * CS2 is used by a real peripheral. CS0 is just
-				 * routed to a test point.
-				 */
-				mux0 {
-					pins =
-					    /* "gpio39", CS1A_N this is not good to mux */
-					    "gpio40", /* CS2A_N */
-					    "gpio134"; /* CS0_N testpoint TP29 */
-					function = "ebi2cs";
-				};
-				mux1 {
-					pins =
-					    /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
-					    "gpio123", "gpio124", "gpio125", "gpio126",
-					    "gpio127", "gpio128", "gpio129", "gpio130",
-					    /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */
-					    "gpio135", "gpio136", "gpio137", "gpio138",
-					    "gpio139", "gpio140", "gpio141", "gpio142",
-					    "gpio143", "gpio144", "gpio145", "gpio146",
-					    "gpio147", "gpio148", "gpio149", "gpio150",
-					    "gpio151", /* EBI2_OE_N */
-					    "gpio153", /* EBI2_ADV */
-					    "gpio157"; /* EBI2_WE_N */
-					function = "ebi2";
-				};
-			};
-
-			/* Interrupt line for the KXSD9 accelerometer */
-			dragon_kxsd9_gpios: kxsd9 {
-				irq {
-					pins = "gpio57"; /* IRQ line */
-					bias-pull-up;
-				};
-			};
-		};
-
-		qcom,ssbi@500000 {
-			pmic@0 {
-				keypad@148 {
-					linux,keymap = <
-					MATRIX_KEY(0, 0, KEY_MENU)
-					MATRIX_KEY(0, 2, KEY_1)
-					MATRIX_KEY(0, 3, KEY_4)
-					MATRIX_KEY(0, 4, KEY_7)
-					MATRIX_KEY(1, 0, KEY_UP)
-					MATRIX_KEY(1, 1, KEY_LEFT)
-					MATRIX_KEY(1, 2, KEY_DOWN)
-					MATRIX_KEY(1, 3, KEY_5)
-					MATRIX_KEY(1, 3, KEY_8)
-					MATRIX_KEY(2, 0, KEY_HOME)
-					MATRIX_KEY(2, 1, KEY_REPLY)
-					MATRIX_KEY(2, 2, KEY_2)
-					MATRIX_KEY(2, 3, KEY_6)
-					MATRIX_KEY(3, 0, KEY_VOLUMEUP)
-					MATRIX_KEY(3, 1, KEY_RIGHT)
-					MATRIX_KEY(3, 2, KEY_3)
-					MATRIX_KEY(3, 3, KEY_9)
-					MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE)
-					MATRIX_KEY(4, 0, KEY_VOLUMEDOWN)
-					MATRIX_KEY(4, 1, KEY_BACK)
-					MATRIX_KEY(4, 2, KEY_CAMERA)
-					MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
-					>;
-					keypad,num-rows = <6>;
-					keypad,num-columns = <5>;
-				};
-
-				gpio@150 {
-					dragon_ethernet_gpios: ethernet-state {
-						pinconf {
-							pins = "gpio7";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_bmp085_gpios: bmp085-state {
-						pinconf {
-							pins = "gpio16";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_mpu3050_gpios: mpu3050-state {
-						pinconf {
-							pins = "gpio17";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_sdcc3_gpios: sdcc3-state {
-						pinconf {
-							pins = "gpio22";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_sdcc5_gpios: sdcc5-state {
-						pinconf {
-							pins = "gpio26";
-							function = "normal";
-							input-enable;
-							bias-pull-up;
-							qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_ak8975_gpios: ak8975-state {
-						pinconf {
-							pins = "gpio33";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_cm3605_gpios: cm3605-state {
-						/* Pin 34 connected to the proxy IRQ */
-						gpio34-pins {
-							pins = "gpio34";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-						/* Pin 35 connected to ASET */
-						gpio35-pins {
-							pins = "gpio35";
-							function = "normal";
-							output-high;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_veth_gpios: veth-state {
-						pinconf {
-							pins = "gpio40";
-							function = "normal";
-							bias-disable;
-							drive-push-pull;
-						};
-					};
-				};
-
-				mpps@50 {
-					dragon_cm3605_mpps: cm3605-mpps-state {
-						mpp5 {
-							pins = "mpp5";
-							function = "analog";
-							input-enable;
-							bias-high-impedance;
-							/* Let's use channel 5 */
-							qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-				};
-
-				xoadc@197 {
-					/* Reference voltage 2.2 V */
-					xoadc-ref-supply = <&pm8058_l18>;
-
-					/* Board-specific channels */
-					mpp5@5 {
-						/* Connected to AOUT of ALS sensor */
-						reg = <0x00 0x05>;
-					};
-					mpp6@6 {
-						/* Connected to test point TP43 */
-						reg = <0x00 0x06>;
-					};
-					mpp7@7 {
-						/* Connected to battery thermistor */
-						reg = <0x00 0x07>;
-					};
-					mpp8@8 {
-						/* Connected to battery ID detector */
-						reg = <0x00 0x08>;
-					};
-					mpp9@9 {
-						/* Connected to XO thermistor */
-						reg = <0x00 0x09>;
-					};
-				};
-
-				led@48 {
-					/*
-					 * The keypad LED @0x48 is routed to
-					 * the sensor board where it is
-					 * connected to an infrared LED
-					 * SFH4650 (60mW, @850nm) next to the
-					 * ambient light and proximity sensor
-					 * Capella Microsystems CM3605.
-					 */
-					compatible = "qcom,pm8058-keypad-led";
-					reg = <0x48>;
-					label = "pm8058:infrared:proximitysensor";
-					default-state = "off";
-					linux,default-trigger = "cm3605";
-				};
-				led@131 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x131>;
-					label = "pm8058:red";
-					color = <LED_COLOR_ID_RED>;
-					default-state = "off";
-				};
-				led@132 {
-					/*
-					 * This is actually green too on my
-					 * board, but documented as yellow.
-					 */
-					compatible = "qcom,pm8058-led";
-					reg = <0x132>;
-					label = "pm8058:yellow";
-					color = <LED_COLOR_ID_YELLOW>;
-					default-state = "off";
-					linux,default-trigger = "mmc0";
-				};
-				led@133 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x133>;
-					label = "pm8058:green";
-					function = LED_FUNCTION_HEARTBEAT;
-					color = <LED_COLOR_ID_GREEN>;
-					default-state = "on";
-					linux,default-trigger = "heartbeat";
-				};
-			};
-		};
-
-		gsbi@19800000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-
-			i2c@19880000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_gsbi8_i2c_pins>;
-
-				eeprom@52 {
-					/* A 16KiB Platform ID EEPROM on the CPU carrier board */
-					compatible = "atmel,24c128";
-					reg = <0x52>;
-					vcc-supply = <&pm8058_s3>;
-					pagesize = <64>;
-				};
-				wm8903: wm8903@1a {
-					/* This Woolfson Micro device has an unrouted interrupt line */
-					compatible = "wlf,wm8903";
-					reg = <0x1a>;
-
-					AVDD-supply = <&pm8058_l16>;
-					CPVDD-supply = <&pm8058_l16>;
-					DBVDD-supply = <&pm8058_s3>;
-					DCVDD-supply = <&pm8058_l0>;
-
-					gpio-controller;
-					#gpio-cells = <2>;
-
-					micdet-cfg = <0>;
-					micdet-delay = <100>;
-					gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
-				};
-			};
-		};
-
-		gsbi@19c00000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-
-			serial@19c40000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_gsbi12_serial_pins>;
-			};
-
-			i2c@19c80000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
-
-				ak8975@c {
-					compatible = "asahi-kasei,ak8975";
-					reg = <0x0c>;
-					interrupt-parent = <&pm8058_gpio>;
-					interrupts = <33 IRQ_TYPE_EDGE_RISING>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&dragon_ak8975_gpios>;
-					vid-supply = <&pm8058_lvs0>; // 1.8V
-					vdd-supply = <&pm8058_l14>; // 2.85V
-				};
-				bmp085@77 {
-					compatible = "bosch,bmp085";
-					reg = <0x77>;
-					interrupt-parent = <&pm8058_gpio>;
-					interrupts = <16 IRQ_TYPE_EDGE_RISING>;
-					reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&dragon_bmp085_gpios>;
-					vddd-supply = <&pm8058_lvs0>; // 1.8V
-					vdda-supply = <&pm8058_l14>; // 2.85V
-				};
-				mpu3050@68 {
-					compatible = "invensense,mpu3050";
-					reg = <0x68>;
-					/*
-					 * GPIO17 is pulled high by a 10k
-					 * resistor to VLOGIC so needs to be
-					 * active low/falling edge.
-					 */
-					interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&dragon_mpu3050_gpios>;
-					vlogic-supply = <&pm8058_lvs0>; // 1.8V
-					vdd-supply = <&pm8058_l14>; // 2.85V
-
-					/*
-					 * The MPU-3050 acts as a hub for the
-					 * accelerometer.
-					 */
-					i2c-gate {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						kxsd9@18 {
-							compatible = "kionix,kxsd9";
-							reg = <0x18>;
-							interrupt-parent = <&tlmm>;
-							interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
-							pinctrl-names = "default";
-							pinctrl-0 = <&dragon_kxsd9_gpios>;
-							iovdd-supply = <&pm8058_lvs0>; // 1.8V
-							vdd-supply = <&pm8058_l14>; // 2.85V
-						};
-					};
-				};
-			};
-		};
-
-		external-bus@1a100000 {
-			/* The EBI2 will instantiate first, then populate its children */
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&dragon_ebi2_pins>;
-
-			/*
-			 * An on-board SMSC LAN9221 chip for "debug ethernet",
-			 * which is actually just an ordinary ethernet on the
-			 * EBI2. This has a 25MHz chrystal next to it, so no
-			 * clocking is needed.
-			 */
-			ethernet@2,0 {
-				compatible = "smsc,lan9221", "smsc,lan9115";
-				reg = <2 0x0 0x100>;
-				/*
-				 * The second interrupt is the PME interrupt
-				 * for network wakeup, connected to the TLMM.
-				 */
-				interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
-						    <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
-				reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
-				vdd33a-supply = <&dragon_veth>;
-				vddvario-supply = <&dragon_vario>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_ethernet_gpios>;
-				phy-mode = "mii";
-				reg-io-width = <2>;
-				smsc,force-external-phy;
-				smsc,irq-push-pull;
-
-				/*
-				 * SLOW chipselect config
-				 * Delay 9 cycles (140ns@64MHz) between SMSC
-				 * LAN9221 Ethernet controller reads and writes
-				 * on CS2.
-				 */
-				qcom,xmem-recovery-cycles = <0>;
-				qcom,xmem-write-hold-cycles = <3>;
-				qcom,xmem-write-delta-cycles = <31>;
-				qcom,xmem-read-delta-cycles = <28>;
-				qcom,xmem-write-wait-cycles = <9>;
-				qcom,xmem-read-wait-cycles = <9>;
-			};
-		};
-
-		rpm@104000 {
-			/*
-			 * Set up of the PMIC RPM regulators for this board
-			 * PM8901 supplies "preliminary regulators" whatever
-			 * that means
-			 */
-			pm8901-regulators {
-				vdd_l0-supply = <&pm8901_s4>;
-				vdd_l1-supply = <&vph>;
-				vdd_l2-supply = <&vph>;
-				vdd_l3-supply = <&vph>;
-				vdd_l4-supply = <&vph>;
-				vdd_l5-supply = <&vph>;
-				vdd_l6-supply = <&vph>;
-				/* vdd_s0-supply, vdd_s1-supply: SAW regulators */
-				vdd_s2-supply = <&vph>;
-				vdd_s3-supply = <&vph>;
-				vdd_s4-supply = <&vph>;
-				lvs0_in-supply = <&pm8058_s3>;
-				lvs1_in-supply = <&pm8901_s4>;
-				lvs2_in-supply = <&pm8058_l0>;
-				lvs3_in-supply = <&pm8058_s2>;
-				mvs_in-supply = <&pm8058_s3>;
-
-				l0 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l1 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-				l2 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-				l3 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-				l4 {
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l5 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l6 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					bias-pull-down;
-				};
-
-				/* s0 and s1 are SAW regulators controlled over SPM */
-				s2 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s3 {
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s4 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				/* LVS0 thru 3 and mvs are just switches */
-				lvs0 {
-					regulator-always-on;
-				};
-				lvs1 { };
-				lvs2 { };
-				lvs3 { };
-				mvs { };
-
-			};
-
-			pm8058-regulators {
-				vdd_l0_l1_lvs-supply = <&pm8058_s3>;
-				vdd_l2_l11_l12-supply = <&vph>;
-				vdd_l3_l4_l5-supply = <&vph>;
-				vdd_l6_l7-supply = <&vph>;
-				vdd_l8-supply = <&vph>;
-				vdd_l9-supply = <&vph>;
-				vdd_l10-supply = <&vph>;
-				vdd_l13_l16-supply = <&pm8058_s4>;
-				vdd_l14_l15-supply = <&vph>;
-				vdd_l17_l18-supply = <&vph>;
-				vdd_l19_l20-supply = <&vph>;
-				vdd_l21-supply = <&pm8058_s3>;
-				vdd_l22-supply = <&pm8058_s3>;
-				vdd_l23_l24_l25-supply = <&pm8058_s3>;
-				vdd_s0-supply = <&vph>;
-				vdd_s1-supply = <&vph>;
-				vdd_s2-supply = <&vph>;
-				vdd_s3-supply = <&vph>;
-				vdd_s4-supply = <&vph>;
-				vdd_ncp-supply = <&vph>;
-
-				l0 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l1 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l2 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l3 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l4 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l5 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l6 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3600000>;
-					bias-pull-down;
-				};
-				l7 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l8 {
-					regulator-min-microvolt = <2900000>;
-					regulator-max-microvolt = <3050000>;
-					bias-pull-down;
-				};
-				l9 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l10 {
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l11 {
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					bias-pull-down;
-				};
-				l12 {
-					regulator-min-microvolt = <2900000>;
-					regulator-max-microvolt = <2900000>;
-					bias-pull-down;
-				};
-				l13 {
-					regulator-min-microvolt = <2050000>;
-					regulator-max-microvolt = <2050000>;
-					bias-pull-down;
-				};
-				l14 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-				};
-				l15 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l16 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-					regulator-always-on;
-				};
-				l17 {
-					// 1.5V according to schematic
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l18 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					bias-pull-down;
-				};
-				l19 {
-					regulator-min-microvolt = <2500000>;
-					regulator-max-microvolt = <2500000>;
-					bias-pull-down;
-				};
-				l20 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l21 {
-					// 1.1 V according to schematic
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-					regulator-always-on;
-				};
-				l22 {
-					// 1.2 V according to schematic
-					regulator-min-microvolt = <1150000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-				l23 {
-					// Unused
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l24 {
-					// Unused
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l25 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				s0 {
-					// regulator-min-microvolt = <500000>;
-					// regulator-max-microvolt = <1325000>;
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s1 {
-					// regulator-min-microvolt = <500000>;
-					// regulator-max-microvolt = <1250000>;
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s2 {
-					// 1.3 V according to schematic
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1400000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s3 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					regulator-always-on;
-					bias-pull-down;
-				};
-				s4 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					qcom,switch-mode-frequency = <1600000>;
-					regulator-always-on;
-					bias-pull-down;
-				};
-
-				/* LVS0 and LVS1 are just switches */
-				lvs0 {
-					bias-pull-down;
-				};
-				lvs1 {
-					bias-pull-down;
-				};
-
-				ncp {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-				};
-			};
-		};
-		amba {
-			/* Internal 3.69 GiB eMMC */
-			mmc@12400000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_sdcc1_pins>;
-				vmmc-supply = <&pm8901_l5>;
-				vqmmc-supply = <&pm8901_lvs0>;
-			};
-
-			/* External micro SD card, directly connected, pulled up to 2.85 V */
-			mmc@12180000 {
-				status = "okay";
-				/* Enable SSBI GPIO 22 as input, use for card detect */
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>;
-				cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>;
-				wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
-				vmmc-supply = <&pm8058_l14>;
-			};
-
-			/*
-			 * Second external micro SD card, using two TXB104RGYR levelshifters
-			 * to lift from 1.8 V to 2.85 V
-			 */
-			mmc@12200000 {
-				status = "okay";
-				/* Enable SSBI GPIO 26 as input, use for card detect */
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>;
-				cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>;
-				wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>;
-				vmmc-supply = <&pm8058_l14>;
-				vqmmc-supply = <&dragon_vio_txb>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
deleted file mode 100644
index fee278e32cb6..000000000000
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ /dev/null
@@ -1,358 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-/ {
-	model = "Asus Nexus7(flo)";
-	compatible = "asus,nexus7-flo", "qcom,apq8064";
-
-	aliases {
-		serial0 = &gsbi7_serial;
-		serial1 = &gsbi6_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		ramoops@88d00000{
-			compatible = "ramoops";
-			reg = <0x88d00000 0x100000>;
-			record-size = <0x00020000>;
-			console-size = <0x00020000>;
-			ftrace-size = <0x00020000>;
-		};
-	};
-
-	ext_3p3v: regulator-fixed@1 {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-name = "ext_3p3v";
-		regulator-type = "voltage";
-		startup-delay-us = <0>;
-		gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	soc {
-		rpm@108000 {
-			regulators {
-				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vin_lvs1_3_6-supply = <&pm8921_s4>;
-				vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-
-				vdd_l24-supply = <&pm8921_s1>;
-				vdd_l25-supply = <&pm8921_s1>;
-				vin_lvs2-supply = <&pm8921_s1>;
-
-				vdd_l26-supply = <&pm8921_s7>;
-				vdd_l27-supply = <&pm8921_s7>;
-				vdd_l28-supply = <&pm8921_s7>;
-
-				vdd_ncp-supply = <&pm8921_l6>;
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				/* msm otg HSUSB_VDDCX */
-				s3 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <4800000>;
-				};
-
-				/*
-				 * msm_sdcc.1-sdc-vdd_io
-				 * tabla2x-slim-CDC_VDDA_RX
-				 * tabla2x-slim-CDC_VDDA_TX
-				 * tabla2x-slim-CDC_VDD_CP
-				 * tabla2x-slim-VDDIO_CDC
-				 */
-				s4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <3200000>;
-					regulator-always-on;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				/* mipi_dsi.1-dsi1_pll_vdda */
-				l2 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				/* msm_otg-HSUSB_3p3 */
-				l3 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3075000>;
-					bias-pull-down;
-				};
-
-				/* msm_otg-HSUSB_1p8 */
-				l4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				/* msm_sdcc.1-sdc_vdd */
-				l5 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					regulator-always-on;
-					bias-pull-down;
-				};
-
-				l6 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-				};
-
-				/* mipi_dsi.1-dsi1_avdd */
-				l11 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-					regulator-always-on;
-				};
-
-				/* pwm_power for backlight */
-				l17 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-				};
-
-				/* camera, qdsp6 */
-				l23 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				/*
-				 * tabla2x-slim-CDC_VDDA_A_1P2V
-				 * tabla2x-slim-VDDD_CDC_D
-				 */
-				l25 {
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-					bias-pull-down;
-				};
-
-				lvs1 {
-					bias-pull-down;
-				};
-
-				lvs4 {
-					bias-pull-down;
-				};
-
-				lvs5 {
-					bias-pull-down;
-				};
-
-				lvs6 {
-					bias-pull-down;
-				};
-				/*
-				 * mipi_dsi.1-dsi1_vddio
-				 * pil_riva-pll_vdd
-				 */
-				lvs7 {
-					bias-pull-down;
-				};
-			};
-		};
-
-		mdp@5100000 {
-			status = "okay";
-			ports {
-				port@1 {
-					mdp_dsi1_out: endpoint {
-						remote-endpoint = <&dsi0_in>;
-					};
-				};
-			};
-		};
-
-		dsi0: dsi@4700000 {
-			status = "okay";
-			vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
-			vdd-supply = <&pm8921_l8>;
-			vddio-supply = <&pm8921_lvs7>;
-			avdd-supply = <&pm8921_l11>;
-
-			panel@0 {
-				reg = <0>;
-				compatible = "jdi,lt070me05000";
-
-				vddp-supply = <&pm8921_l17>;
-				iovcc-supply = <&pm8921_lvs7>;
-
-				enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
-				reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
-				dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
-
-				port {
-					panel_in: endpoint {
-						remote-endpoint = <&dsi0_out>;
-					};
-				};
-			};
-			ports {
-				port@0 {
-					dsi0_in: endpoint {
-						remote-endpoint = <&mdp_dsi1_out>;
-					};
-				};
-
-				port@1 {
-					dsi0_out: endpoint {
-						remote-endpoint = <&panel_in>;
-						data-lanes = <0 1 2 3>;
-					};
-				};
-			};
-		};
-
-		dsi-phy@4700200 {
-			status = "okay";
-			vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
-		};
-
-		gsbi@16200000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-			i2c@16280000 {
-				status = "okay";
-				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c3_pins>;
-				pinctrl-names = "default";
-
-				trackpad@10 {
-					compatible = "elan,ekth3500";
-					reg = <0x10>;
-					interrupt-parent = <&tlmm_pinmux>;
-					interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-				};
-			};
-		};
-
-
-		gsbi@12440000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-
-			i2c@12460000 {
-				status = "okay";
-				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-names = "default";
-
-				eeprom@52 {
-					compatible = "atmel,24c128";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
-
-				bq27541@55 {
-					compatible = "ti,bq27541";
-					reg = <0x55>;
-				};
-
-			};
-		};
-
-		gsbi@16500000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-
-			serial@16540000 {
-				status = "okay";
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi6_uart_4pins>;
-			};
-		};
-
-		gsbi@16600000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16640000 {
-				status = "okay";
-			};
-		};
-
-		/* OTG */
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
-		};
-
-		amba {
-			/* eMMC */
-			mmc@12400000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
-		};
-
-		sram@2a03f000 {
-			compatible = "qcom,apq8064-imem", "syscon", "simple-mfd";
-			reg = <0x2a03f000 0x1000>;
-
-			reboot-mode {
-				compatible = "syscon-reboot-mode";
-				offset = <0x65c>;
-
-				mode-normal = <0x77665501>;
-				mode-bootloader = <0x77665500>;
-				mode-recovery = <0x77665502>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
deleted file mode 100644
index e3bf57cd7423..000000000000
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ /dev/null
@@ -1,246 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "CompuLab CM-QS600";
-	compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
-
-	aliases {
-		serial0 = &gsbi7_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	pwrseq {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		sdcc4_pwrseq: sdcc4_pwrseq {
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_default_gpios>;
-			compatible = "mmc-pwrseq-simple";
-			reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	soc {
-		pinctrl@800000 {
-			card_detect: card_detect {
-				mux {
-					pins = "gpio26";
-					function = "gpio";
-					bias-disable;
-				};
-			};
-
-			pcie_pins: pcie_pinmux {
-				mux {
-					pins = "gpio27";
-					function = "gpio";
-				};
-				conf {
-					pins = "gpio27";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-		};
-
-		rpm@108000 {
-			regulators {
-				vin_lvs1_3_6-supply = <&pm8921_s4>;
-				vin_lvs2-supply = <&pm8921_s1>;
-				vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vdd_l24-supply = <&pm8921_s1>;
-				vdd_l25-supply = <&pm8921_s1>;
-				vdd_l26-supply = <&pm8921_s7>;
-				vdd_l27-supply = <&pm8921_s7>;
-				vdd_l28-supply = <&pm8921_s7>;
-
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				s3 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1400000>;
-					qcom,switch-mode-frequency = <4800000>;
-				};
-
-				s4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				l3 {
-					regulator-min-microvolt = <3050000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-
-				l4 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l5 {
-					regulator-min-microvolt = <2750000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l23 {
-					regulator-min-microvolt = <1700000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				pm8921_lvs6: lvs6 {
-					bias-pull-down;
-				};
-
-			};
-		};
-
-		gsbi@12440000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-
-			i2c@12460000 {
-				status = "okay";
-				clock-frequency = <200000>;
-
-				eeprom@50 {
-					compatible = "atmel,24c02";
-					reg = <0x50>;
-					pagesize = <32>;
-				};
-			};
-		};
-
-		gsbi@16600000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16640000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi7_uart_2pins>;
-			};
-		};
-
-		/* OTG */
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
-		};
-
-		usb@12520000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
-		};
-
-		usb@12530000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
-		};
-
-		/* on board fixed 3.3v supply */
-		v3p3_fixed: v3p3 {
-			compatible = "regulator-fixed";
-			regulator-name = "PCIE V3P3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		qcom,ssbi@500000 {
-			pmic@0 {
-				gpio@150 {
-					wlan_default_gpios: wlan-gpios-state {
-						pinconf {
-							pins = "gpio43";
-							function = "normal";
-							bias-disable;
-							power-source = <PM8921_GPIO_S4>;
-						};
-					};
-				};
-			};
-		};
-
-		pci@1b500000 {
-			status = "okay";
-			vdda-supply = <&pm8921_s3>;
-			vdda_phy-supply = <&pm8921_lvs6>;
-			vdda_refclk-supply = <&v3p3_fixed>;
-			pinctrl-0 = <&pcie_pins>;
-			pinctrl-names = "default";
-			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
-		};
-
-		amba {
-			/* eMMC */
-			sdcc1: mmc@12400000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
-
-			/* External micro SD card */
-			sdcc3: mmc@12180000 {
-				status = "okay";
-				vmmc-supply = <&v3p3_fixed>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&card_detect>;
-				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-			};
-			/* WLAN */
-			sdcc4: mmc@121c0000 {
-				status = "okay";
-				vmmc-supply = <&v3p3_fixed>;
-				vqmmc-supply = <&v3p3_fixed>;
-				mmc-pwrseq = <&sdcc4_pwrseq>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
deleted file mode 100644
index 0322cb88d448..000000000000
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ /dev/null
@@ -1,382 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "Qualcomm APQ8064/IFC6410";
-	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
-
-	aliases {
-		serial0 = &gsbi7_serial;
-		serial1 = &gsbi6_serial;
-		i2c0 = &gsbi1_i2c;
-		i2c1 = &gsbi2_i2c;
-		i2c2 = &gsbi3_i2c;
-		i2c3 = &gsbi4_i2c;
-		spi0 = &gsbi5_spi;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	pwrseq {
-		compatible = "simple-bus";
-
-		sdcc4_pwrseq: sdcc4_pwrseq {
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_default_gpios>;
-			compatible = "mmc-pwrseq-simple";
-			reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&notify_led>;
-
-		led@1 {
-			label = "apq8064:green:user1";
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "d";
-
-		port {
-			hdmi_con: endpoint {
-				remote-endpoint = <&hdmi_out>;
-			};
-		};
-	};
-
-	soc {
-		pinctrl@800000 {
-			card_detect: card_detect {
-				mux {
-					pins = "gpio26";
-					function = "gpio";
-					bias-disable;
-				};
-			};
-
-			pcie_pins: pcie_pinmux {
-				mux {
-					pins = "gpio27";
-					function = "gpio";
-				};
-				conf {
-					pins = "gpio27";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-		};
-
-		rpm@108000 {
-			regulators {
-				vin_lvs1_3_6-supply = <&pm8921_s4>;
-				vin_lvs2-supply = <&pm8921_s1>;
-				vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vdd_l24-supply = <&pm8921_s1>;
-				vdd_l25-supply = <&pm8921_s1>;
-				vdd_l26-supply = <&pm8921_s7>;
-				vdd_l27-supply = <&pm8921_s7>;
-				vdd_l28-supply = <&pm8921_s7>;
-
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				s3 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1400000>;
-					qcom,switch-mode-frequency = <4800000>;
-				};
-
-				s4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				l3 {
-					regulator-min-microvolt = <3050000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-
-				l4 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l5 {
-					regulator-min-microvolt = <2750000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l6 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l23 {
-					regulator-min-microvolt = <1700000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				lvs1 {
-					bias-pull-down;
-				};
-
-				lvs6 {
-					bias-pull-down;
-				};
-			};
-		};
-
-		ext_3p3v: regulator-fixed@1 {
-			compatible = "regulator-fixed";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-name = "ext_3p3v";
-			regulator-type = "voltage";
-			startup-delay-us = <0>;
-			gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-boot-on;
-		};
-
-		gsbi3: gsbi@16200000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-			i2c@16280000 {
-				status = "okay";
-			};
-		};
-
-		gsbi@16300000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-			/* CAM I2C MIPI-CSI connector */
-			i2c@16380000 {
-				status = "okay";
-			};
-		};
-
-		gsbi@12440000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-
-			i2c@12460000 {
-				status = "okay";
-				clock-frequency = <200000>;
-
-				eeprom@52 {
-					compatible = "atmel,24c128";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
-			};
-		};
-
-		gsbi@1a200000 {
-			qcom,mode = <GSBI_PROT_SPI>;
-			status = "okay";
-			spi4: spi@1a280000 {
-				status = "okay";
-				num-cs = <1>;
-				cs-gpios = <&tlmm_pinmux 53 0>;
-			};
-		};
-
-		gsbi@16500000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_UART_W_FC>;
-
-			serial@16540000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi6_uart_4pins>;
-			};
-		};
-
-		gsbi@16600000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16640000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi7_uart_2pins>;
-			};
-		};
-
-		sata_phy0: phy@1b400000 {
-			status = "okay";
-		};
-
-		sata0: sata@29000000 {
-			status = "okay";
-			target-supply = <&pm8921_s4>;
-		};
-
-		/* OTG */
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
-		};
-
-		usb@12520000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
-		};
-
-		usb@12530000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
-		};
-
-		pci@1b500000 {
-			status = "okay";
-			vdda-supply = <&pm8921_s3>;
-			vdda_phy-supply = <&pm8921_lvs6>;
-			vdda_refclk-supply = <&ext_3p3v>;
-			pinctrl-0 = <&pcie_pins>;
-			pinctrl-names = "default";
-			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
-		};
-
-		qcom,ssbi@500000 {
-			pmic@0 {
-				gpio@150 {
-					wlan_default_gpios: wlan-gpios-state {
-						pinconf {
-							pins = "gpio43";
-							function = "normal";
-							bias-disable;
-							power-source = <PM8921_GPIO_S4>;
-						};
-					};
-
-					notify_led: nled-state {
-						pinconf {
-							pins = "gpio18";
-							function = "normal";
-							bias-disable;
-							power-source = <PM8921_GPIO_S4>;
-						};
-					};
-				};
-			};
-		};
-
-		amba {
-			/* eMMC */
-			sdcc1: mmc@12400000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
-
-			/* External micro SD card */
-			sdcc3: mmc@12180000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l6>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&card_detect>;
-				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-			};
-			/* WLAN */
-			sdcc4: mmc@121c0000 {
-				status = "okay";
-				vmmc-supply = <&ext_3p3v>;
-				vqmmc-supply = <&pm8921_lvs1>;
-				mmc-pwrseq = <&sdcc4_pwrseq>;
-			};
-		};
-
-		hdmi-tx@4a00000 {
-			status = "okay";
-
-			core-vdda-supply = <&pm8921_hdmi_switch>;
-
-			hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
-
-			ports {
-				port@0 {
-					endpoint {
-						remote-endpoint = <&mdp_dtv_out>;
-					};
-				};
-
-				port@1 {
-					endpoint {
-						remote-endpoint = <&hdmi_con>;
-					};
-				};
-			};
-		};
-
-		hdmi-phy@4a00400 {
-			status = "okay";
-
-			core-vdda-supply = <&pm8921_hdmi_switch>;
-		};
-
-		mdp@5100000 {
-			status = "okay";
-
-			ports {
-				port@3 {
-					endpoint {
-						remote-endpoint = <&hdmi_in>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
deleted file mode 100644
index b4d286a6fab1..000000000000
--- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
+++ /dev/null
@@ -1,325 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-&tlmm_pinmux {
-	sdc4_gpios: sdc4-gpios {
-		pios {
-			pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
-			function = "sdc4";
-		};
-	};
-
-	sdcc1_pins: sdcc1-pin-active {
-		clk {
-			pins = "sdc1_clk";
-			drive-strengh = <16>;
-			bias-disable;
-		};
-
-		cmd {
-			pins = "sdc1_cmd";
-			drive-strengh = <10>;
-			bias-pull-up;
-		};
-
-		data {
-			pins = "sdc1_data";
-			drive-strengh = <10>;
-			bias-pull-up;
-		};
-	};
-
-	sdcc3_pins: sdcc3-pin-active {
-		clk {
-			pins = "sdc3_clk";
-			drive-strengh = <8>;
-			bias-disable;
-		};
-
-		cmd {
-			pins = "sdc3_cmd";
-			drive-strengh = <8>;
-			bias-pull-up;
-		};
-
-		data {
-			pins = "sdc3_data";
-			drive-strengh = <8>;
-			bias-pull-up;
-		};
-	};
-
-	ps_hold: ps_hold {
-		mux {
-			pins = "gpio78";
-			function = "ps_hold";
-		};
-	};
-
-	i2c1_pins: i2c1 {
-		mux {
-			pins = "gpio20", "gpio21";
-			function = "gsbi1";
-		};
-
-		pinconf {
-			pins = "gpio20", "gpio21";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c1_pins_sleep: i2c1_pins_sleep {
-		mux {
-			pins = "gpio20", "gpio21";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio20", "gpio21";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	gsbi1_uart_2pins: gsbi1_uart_2pins {
-		mux {
-			pins = "gpio18", "gpio19";
-			function = "gsbi1";
-		};
-	};
-
-	gsbi1_uart_4pins: gsbi1_uart_4pins {
-		mux {
-			pins = "gpio18", "gpio19", "gpio20", "gpio21";
-			function = "gsbi1";
-		};
-	};
-
-	i2c2_pins: i2c2 {
-		mux {
-			pins = "gpio24", "gpio25";
-			function = "gsbi2";
-		};
-
-		pinconf {
-			pins = "gpio24", "gpio25";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c2_pins_sleep: i2c2_pins_sleep {
-		mux {
-			pins = "gpio24", "gpio25";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio24", "gpio25";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	i2c3_pins: i2c3 {
-		mux {
-			pins = "gpio8", "gpio9";
-			function = "gsbi3";
-		};
-
-		pinconf {
-			pins = "gpio8", "gpio9";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c3_pins_sleep: i2c3_pins_sleep {
-		mux {
-			pins = "gpio8", "gpio9";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio8", "gpio9";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	i2c4_pins: i2c4 {
-		mux {
-			pins = "gpio12", "gpio13";
-			function = "gsbi4";
-		};
-
-		pinconf {
-			pins = "gpio12", "gpio13";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c4_pins_sleep: i2c4_pins_sleep {
-		mux {
-			pins = "gpio12", "gpio13";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio12", "gpio13";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	spi5_default: spi5_default {
-		pinmux {
-			pins = "gpio51", "gpio52", "gpio54";
-			function = "gsbi5";
-		};
-
-		pinmux_cs {
-			function = "gpio";
-			pins = "gpio53";
-		};
-
-		pinconf {
-			pins = "gpio51", "gpio52", "gpio54";
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		pinconf_cs {
-			pins = "gpio53";
-			drive-strength = <16>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	spi5_sleep: spi5_sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio51", "gpio52", "gpio53", "gpio54";
-		};
-
-		pinconf {
-			pins = "gpio51", "gpio52", "gpio53", "gpio54";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-
-	i2c6_pins: i2c6 {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "gsbi6";
-		};
-
-		pinconf {
-			pins = "gpio16", "gpio17";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c6_pins_sleep: i2c6_pins_sleep {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio16", "gpio17";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	gsbi6_uart_2pins: gsbi6_uart_2pins {
-		mux {
-			pins = "gpio14", "gpio15";
-			function = "gsbi6";
-		};
-	};
-
-	gsbi6_uart_4pins: gsbi6_uart_4pins {
-		mux {
-			pins = "gpio14", "gpio15", "gpio16", "gpio17";
-			function = "gsbi6";
-		};
-	};
-
-	gsbi7_uart_2pins: gsbi7_uart_2pins {
-		mux {
-			pins = "gpio82", "gpio83";
-			function = "gsbi7";
-		};
-	};
-
-	gsbi7_uart_4pins: gsbi7_uart_4pins {
-		mux {
-			pins = "gpio82", "gpio83", "gpio84", "gpio85";
-			function = "gsbi7";
-		};
-	};
-
-	i2c7_pins: i2c7 {
-		mux {
-			pins = "gpio84", "gpio85";
-			function = "gsbi7";
-		};
-
-		pinconf {
-			pins = "gpio84", "gpio85";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c7_pins_sleep: i2c7_pins_sleep {
-		mux {
-			pins = "gpio84", "gpio85";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio84", "gpio85";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	riva_fm_pin_a: riva-fm-active {
-		pins = "gpio14", "gpio15";
-		function = "riva_fm";
-	};
-
-	riva_bt_pin_a: riva-bt-active {
-		pins = "gpio16", "gpio17";
-		function = "riva_bt";
-	};
-
-	riva_wlan_pin_a: riva-wlan-active {
-		pins = "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
-		function = "riva_wlan";
-
-		drive-strength = <6>;
-		bias-pull-down;
-	};
-
-	hdmi_pinctrl: hdmi-pinctrl {
-		mux {
-			pins = "gpio70", "gpio71", "gpio72";
-			function = "hdmi";
-		};
-
-		pinconf_ddc {
-			pins = "gpio70", "gpio71";
-			bias-pull-up;
-			drive-strength = <2>;
-		};
-
-		pinconf_hpd {
-			pins = "gpio72";
-			bias-pull-down;
-			drive-strength = <16>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
deleted file mode 100644
index c07c5474750d..000000000000
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ /dev/null
@@ -1,401 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mfd/qcom-rpm.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "Sony Xperia Z";
-	compatible = "sony,xperia-yuga", "qcom,apq8064";
-
-	aliases {
-		serial0 = &gsbi5_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		key-camera-focus {
-			label = "camera_focus";
-			gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA_FOCUS>;
-		};
-
-		key-camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA>;
-		};
-
-		key-volume-down {
-			label = "volume_down";
-			gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		key-volume-up {
-			label = "volume_up";
-			gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	soc {
-		pinctrl@800000 {
-			gsbi5_uart_pin_a: gsbi5-uart-pin-active {
-				rx {
-					pins = "gpio52";
-					function = "gsbi5";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-
-				tx {
-					pins = "gpio51";
-					function = "gsbi5";
-					drive-strength = <4>;
-					bias-disable;
-				};
-			};
-
-
-			sdcc3_cd_pin_a: sdcc3-cd-pin-active {
-				pins = "gpio26";
-				function = "gpio";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-
-		rpm@108000 {
-			regulators {
-				vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vin_lvs_1_3_6-supply = <&pm8921_s4>;
-				vin_lvs_4_5_7-supply = <&pm8921_s4>;
-				vin_ncp-supply = <&pm8921_l6>;
-				vin_lvs2-supply = <&pm8921_s4>;
-				vin_l24-supply = <&pm8921_s1>;
-				vin_l25-supply = <&pm8921_s1>;
-				vin_l27-supply = <&pm8921_s7>;
-				vin_l28-supply = <&pm8921_s7>;
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				s2 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				s3 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <4800000>;
-					bias-pull-down;
-				};
-
-				s4 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				s8 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					qcom,switch-mode-frequency = <1600000>;
-				};
-
-				/* PMOS LDO */
-				l1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					bias-pull-down;
-				};
-
-				l2 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				l3 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3075000>;
-					bias-pull-down;
-				};
-
-				l4 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l5 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l6 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l7 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l8 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					bias-pull-down;
-				};
-
-				l9 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l10 {
-					regulator-min-microvolt = <2900000>;
-					regulator-max-microvolt = <2900000>;
-					bias-pull-down;
-				};
-
-				l11 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l12 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				l14 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l15 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l16 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					bias-pull-down;
-				};
-
-				l17 {
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					bias-pull-down;
-				};
-
-				l18 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				l21 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				l22 {
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-
-				l23 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l24 {
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-
-				l25 {
-					regulator-always-on;
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-					bias-pull-down;
-				};
-
-				l27 {
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-				};
-
-				l28 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				l29 {
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					bias-pull-down;
-				};
-
-				/* Low Voltage Switch */
-				lvs1 {
-					bias-pull-down;
-				};
-
-				lvs2 {
-					bias-pull-down;
-				};
-
-				lvs3 {
-					bias-pull-down;
-				};
-
-				lvs4 {
-					bias-pull-down;
-				};
-
-				lvs5 {
-					bias-pull-down;
-				};
-
-				lvs6 {
-					bias-pull-down;
-				};
-
-				lvs7 {
-					bias-pull-down;
-				};
-
-				usb-switch {};
-
-				hdmi-switch {};
-
-				ncp {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-				};
-			};
-		};
-
-		qcom,ssbi@500000 {
-			pmic@0 {
-				gpio@150 {
-					gpio_keys_pin_a: gpio-keys-active-state {
-						pins = "gpio3", "gpio4", "gpio29", "gpio35";
-						function = "normal";
-
-						bias-pull-up;
-						drive-push-pull;
-						input-enable;
-						power-source = <2>;
-						qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-						qcom,pull-up-strength = <0>;
-					};
-				};
-			};
-		};
-
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
-		};
-
-		gsbi@1a200000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-
-			serial@1a240000 {
-				status = "okay";
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi5_uart_pin_a>;
-			};
-		};
-
-		amba {
-			sdcc1: mmc@12400000 {
-				status = "okay";
-
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
-
-			sdcc3: mmc@12180000 {
-				status = "okay";
-
-				vmmc-supply = <&pm8921_l6>;
-				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
-			};
-		};
-
-		riva-pil@3204000 {
-			status = "okay";
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
deleted file mode 100644
index ada4c828bf2f..000000000000
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ /dev/null
@@ -1,1773 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/clock/qcom,gcc-msm8960.h>
-#include <dt-bindings/reset/qcom,gcc-msm8960.h>
-#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Qualcomm APQ8064";
-	compatible = "qcom,apq8064";
-	interrupt-parent = <&intc>;
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		smem_region: smem@80000000 {
-			reg = <0x80000000 0x200000>;
-			no-map;
-		};
-
-		wcnss_mem: wcnss@8f000000 {
-			reg = <0x8f000000 0x700000>;
-			no-map;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CPU0: cpu@0 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		CPU1: cpu@1 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		CPU2: cpu@2 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <2>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc2>;
-			qcom,saw = <&saw2>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		CPU3: cpu@3 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <3>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc3>;
-			qcom,saw = <&saw3>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-
-		idle-states {
-			CPU_SPC: spc {
-				compatible = "qcom,idle-state-spc",
-						"arm,idle-state";
-				entry-latency-us = <400>;
-				exit-latency-us = <900>;
-				min-residency-us = <3000>;
-			};
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	thermal-zones {
-		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 7>;
-			coefficients = <1199 0>;
-
-			trips {
-				cpu_alert0: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit0: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 8>;
-			coefficients = <1132 0>;
-
-			trips {
-				cpu_alert1: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit1: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 9>;
-			coefficients = <1199 0>;
-
-			trips {
-				cpu_alert2: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit2: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 10>;
-			coefficients = <1132 0>;
-
-			trips {
-				cpu_alert3: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit3: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <1 10 0x304>;
-	};
-
-	clocks {
-		cxo_board: cxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-		};
-
-		pxo_board: pxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <27000000>;
-		};
-
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	sfpb_mutex: hwmutex {
-		compatible = "qcom,sfpb-mutex";
-		syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
-		#hwlock-cells = <1>;
-	};
-
-	smem {
-		compatible = "qcom,smem";
-		memory-region = <&smem_region>;
-
-		hwlocks = <&sfpb_mutex 3>;
-	};
-
-	smd {
-		compatible = "qcom,smd";
-
-		modem-edge {
-			interrupts = <0 37 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&l2cc 8 3>;
-			qcom,smd-edge = <0>;
-
-			status = "disabled";
-		};
-
-		q6-edge {
-			interrupts = <0 90 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&l2cc 8 15>;
-			qcom,smd-edge = <1>;
-
-			status = "disabled";
-		};
-
-		dsps-edge {
-			interrupts = <0 138 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&sps_sic_non_secure 0x4080 0>;
-			qcom,smd-edge = <3>;
-
-			status = "disabled";
-		};
-
-		riva-edge {
-			interrupts = <0 198 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&l2cc 8 25>;
-			qcom,smd-edge = <6>;
-
-			status = "disabled";
-		};
-	};
-
-	smsm {
-		compatible = "qcom,smsm";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		qcom,ipc-1 = <&l2cc 8 4>;
-		qcom,ipc-2 = <&l2cc 8 14>;
-		qcom,ipc-3 = <&l2cc 8 23>;
-		qcom,ipc-4 = <&sps_sic_non_secure 0x4094 0>;
-
-		apps_smsm: apps@0 {
-			reg = <0>;
-			#qcom,smem-state-cells = <1>;
-		};
-
-		modem_smsm: modem@1 {
-			reg = <1>;
-			interrupts = <0 38 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		q6_smsm: q6@2 {
-			reg = <2>;
-			interrupts = <0 89 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		wcnss_smsm: wcnss@3 {
-			reg = <3>;
-			interrupts = <0 204 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		dsps_smsm: dsps@4 {
-			reg = <4>;
-			interrupts = <0 137 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-apq8064", "qcom,scm";
-
-			clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
-			clock-names = "core";
-		};
-	};
-
-
-	/*
-	 * These channels from the ADC are simply hardware monitors.
-	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
-	 * ADC.
-	 */
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Charger temperature */
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		tlmm_pinmux: pinctrl@800000 {
-			compatible = "qcom,apq8064-pinctrl";
-			reg = <0x800000 0x4000>;
-
-			gpio-controller;
-			gpio-ranges = <&tlmm_pinmux 0 0 90>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&ps_hold>;
-		};
-
-		sfpb_wrapper_mutex: syscon@1200000 {
-			compatible = "syscon";
-			reg = <0x01200000 0x8000>;
-		};
-
-		intc: interrupt-controller@2000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x02000000 0x1000>,
-			      <0x02002000 0x1000>;
-		};
-
-		timer@200a000 {
-			compatible = "qcom,kpss-timer",
-				     "qcom,kpss-wdt-apq8064", "qcom,msm-timer";
-			interrupts = <1 1 0x301>,
-				     <1 2 0x301>,
-				     <1 3 0x301>;
-			reg = <0x0200a000 0x100>;
-			clock-frequency = <27000000>,
-					  <32768>;
-			cpu-offset = <0x80000>;
-		};
-
-		acc0: clock-controller@2088000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		acc1: clock-controller@2098000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		acc2: clock-controller@20a8000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		acc3: clock-controller@20b8000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		saw0: power-controller@2089000 {
-			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
-			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw1: power-controller@2099000 {
-			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
-			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw2: power-controller@20a9000 {
-			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
-			reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw3: power-controller@20b9000 {
-			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
-			reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		sps_sic_non_secure: sps-sic-non-secure@12100000 {
-			compatible = "syscon";
-			reg = <0x12100000 0x10000>;
-		};
-
-		gsbi1: gsbi@12440000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <1>;
-			reg = <0x12440000 0x100>;
-			clocks = <&gcc GSBI1_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi1_serial: serial@12450000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x12450000 0x100>,
-				      <0x12400000 0x03>;
-				interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi1_i2c: i2c@12460000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-1 = <&i2c1_pins_sleep>;
-				pinctrl-names = "default", "sleep";
-				reg = <0x12460000 0x1000>;
-				interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-		};
-
-		gsbi2: gsbi@12480000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <2>;
-			reg = <0x12480000 0x100>;
-			clocks = <&gcc GSBI2_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi2_i2c: i2c@124a0000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x124a0000 0x1000>;
-				pinctrl-0 = <&i2c2_pins>;
-				pinctrl-1 = <&i2c2_pins_sleep>;
-				pinctrl-names = "default", "sleep";
-				interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		gsbi3: gsbi@16200000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <3>;
-			reg = <0x16200000 0x100>;
-			clocks = <&gcc GSBI3_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			gsbi3_i2c: i2c@16280000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c3_pins>;
-				pinctrl-1 = <&i2c3_pins_sleep>;
-				pinctrl-names = "default", "sleep";
-				reg = <0x16280000 0x1000>;
-				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI3_QUP_CLK>,
-					 <&gcc GSBI3_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		gsbi4: gsbi@16300000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <4>;
-			reg = <0x16300000 0x03>;
-			clocks = <&gcc GSBI4_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			gsbi4_i2c: i2c@16380000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c4_pins>;
-				pinctrl-1 = <&i2c4_pins_sleep>;
-				pinctrl-names = "default", "sleep";
-				reg = <0x16380000 0x1000>;
-				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI4_QUP_CLK>,
-					 <&gcc GSBI4_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		gsbi5: gsbi@1a200000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <5>;
-			reg = <0x1a200000 0x03>;
-			clocks = <&gcc GSBI5_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			gsbi5_serial: serial@1a240000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x1a240000 0x100>,
-				      <0x1a200000 0x03>;
-				interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi5_spi: spi@1a280000 {
-				compatible = "qcom,spi-qup-v1.1.1";
-				reg = <0x1a280000 0x1000>;
-				interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-0 = <&spi5_default>;
-				pinctrl-1 = <&spi5_sleep>;
-				pinctrl-names = "default", "sleep";
-				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		gsbi6: gsbi@16500000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <6>;
-			reg = <0x16500000 0x03>;
-			clocks = <&gcc GSBI6_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			gsbi6_serial: serial@16540000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16540000 0x100>,
-				      <0x16500000 0x03>;
-				interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi6_i2c: i2c@16580000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c6_pins>;
-				pinctrl-1 = <&i2c6_pins_sleep>;
-				pinctrl-names = "default", "sleep";
-				reg = <0x16580000 0x1000>;
-				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI6_QUP_CLK>,
-					 <&gcc GSBI6_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		gsbi7: gsbi@16600000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <7>;
-			reg = <0x16600000 0x100>;
-			clocks = <&gcc GSBI7_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			syscon-tcsr = <&tcsr>;
-
-			gsbi7_serial: serial@16640000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16640000 0x1000>,
-				      <0x16600000 0x1000>;
-				interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi7_i2c: i2c@16680000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c7_pins>;
-				pinctrl-1 = <&i2c7_pins_sleep>;
-				pinctrl-names = "default", "sleep";
-				reg = <0x16680000 0x1000>;
-				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI7_QUP_CLK>,
-					 <&gcc GSBI7_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		rng@1a500000 {
-			compatible = "qcom,prng";
-			reg = <0x1a500000 0x200>;
-			clocks = <&gcc PRNG_CLK>;
-			clock-names = "core";
-		};
-
-		ssbi@c00000 {
-			compatible = "qcom,ssbi";
-			reg = <0x00c00000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-
-			pm8821: pmic@1 {
-				compatible = "qcom,pm8821";
-				interrupt-parent = <&tlmm_pinmux>;
-				interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8821_mpps: mpps@50 {
-					compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
-					reg = <0x50>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8821_mpps 0 0 4>;
-				};
-			};
-		};
-
-		qcom,ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x00500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic@0 {
-				compatible = "qcom,pm8921";
-				interrupt-parent = <&tlmm_pinmux>;
-				interrupts = <74 8>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8921_gpio: gpio@150 {
-
-					compatible = "qcom,pm8921-gpio",
-						     "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pm8921_gpio 0 0 44>;
-					#gpio-cells = <2>;
-
-				};
-
-				pm8921_mpps: mpps@50 {
-					compatible = "qcom,pm8921-mpp",
-						     "qcom,ssbi-mpp";
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8921_mpps 0 0 12>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 1>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-
-				pwrkey@1c {
-					compatible = "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 1>, <51 1>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				xoadc: xoadc@197 {
-					compatible = "qcom,pm8921-adc";
-					reg = <197>;
-					interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-					#io-channel-cells = <2>;
-
-					vcoin: adc-channel@0 {
-						reg = <0x00 0x00>;
-					};
-					vbat: adc-channel@1 {
-						reg = <0x00 0x01>;
-					};
-					dcin: adc-channel@2 {
-						reg = <0x00 0x02>;
-					};
-					vph_pwr: adc-channel@4 {
-						reg = <0x00 0x04>;
-					};
-					batt_therm: adc-channel@8 {
-						reg = <0x00 0x08>;
-					};
-					batt_id: adc-channel@9 {
-						reg = <0x00 0x09>;
-					};
-					usb_vbus: adc-channel@a {
-						reg = <0x00 0x0a>;
-					};
-					die_temp: adc-channel@b {
-						reg = <0x00 0x0b>;
-					};
-					ref_625mv: adc-channel@c {
-						reg = <0x00 0x0c>;
-					};
-					ref_1250mv: adc-channel@d {
-						reg = <0x00 0x0d>;
-					};
-					chg_temp: adc-channel@e {
-						reg = <0x00 0x0e>;
-					};
-					ref_muxoff: adc-channel@f {
-						reg = <0x00 0x0f>;
-					};
-				};
-			};
-		};
-
-		qfprom: qfprom@700000 {
-			compatible = "qcom,apq8064-qfprom", "qcom,qfprom";
-			reg = <0x00700000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			tsens_calib: calib@404 {
-				reg = <0x404 0x10>;
-			};
-			tsens_backup: backup_calib@414 {
-				reg = <0x414 0x10>;
-			};
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-apq8064", "syscon";
-			reg = <0x00900000 0x4000>;
-			#clock-cells = <1>;
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-
-			tsens: thermal-sensor {
-				compatible = "qcom,msm8960-tsens";
-
-				nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-				nvmem-cell-names = "calib", "calib_backup";
-				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "uplow";
-
-				#qcom,sensors = <11>;
-				#thermal-sensor-cells = <1>;
-			};
-		};
-
-		lcc: clock-controller@28000000 {
-			compatible = "qcom,lcc-apq8064";
-			reg = <0x28000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		mmcc: clock-controller@4000000 {
-			compatible = "qcom,mmcc-apq8064";
-			reg = <0x4000000 0x1000>;
-			#clock-cells = <1>;
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		l2cc: clock-controller@2011000 {
-			compatible = "qcom,kpss-gcc", "syscon";
-			reg = <0x2011000 0x1000>;
-		};
-
-		rpm@108000 {
-			compatible = "qcom,rpm-apq8064";
-			reg = <0x108000 0x1000>;
-			qcom,ipc = <&l2cc 0x8 2>;
-
-			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ack", "err", "wakeup";
-
-			rpmcc: clock-controller {
-				compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc";
-				#clock-cells = <1>;
-				clocks = <&pxo_board>, <&cxo_board>;
-				clock-names = "pxo", "cxo";
-			};
-
-			regulators {
-				compatible = "qcom,rpm-pm8921-regulators";
-
-				pm8921_s1: s1 {};
-				pm8921_s2: s2 {};
-				pm8921_s3: s3 {};
-				pm8921_s4: s4 {};
-				pm8921_s7: s7 {};
-				pm8921_s8: s8 {};
-
-				pm8921_l1: l1 {};
-				pm8921_l2: l2 {};
-				pm8921_l3: l3 {};
-				pm8921_l4: l4 {};
-				pm8921_l5: l5 {};
-				pm8921_l6: l6 {};
-				pm8921_l7: l7 {};
-				pm8921_l8: l8 {};
-				pm8921_l9: l9 {};
-				pm8921_l10: l10 {};
-				pm8921_l11: l11 {};
-				pm8921_l12: l12 {};
-				pm8921_l14: l14 {};
-				pm8921_l15: l15 {};
-				pm8921_l16: l16 {};
-				pm8921_l17: l17 {};
-				pm8921_l18: l18 {};
-				pm8921_l21: l21 {};
-				pm8921_l22: l22 {};
-				pm8921_l23: l23 {};
-				pm8921_l24: l24 {};
-				pm8921_l25: l25 {};
-				pm8921_l26: l26 {};
-				pm8921_l27: l27 {};
-				pm8921_l28: l28 {};
-				pm8921_l29: l29 {};
-
-				pm8921_lvs1: lvs1 {};
-				pm8921_lvs2: lvs2 {};
-				pm8921_lvs3: lvs3 {};
-				pm8921_lvs4: lvs4 {};
-				pm8921_lvs5: lvs5 {};
-				pm8921_lvs6: lvs6 {};
-				pm8921_lvs7: lvs7 {};
-
-				pm8921_usb_switch: usb-switch {};
-
-				pm8921_hdmi_switch: hdmi-switch {
-					bias-pull-down;
-				};
-
-				pm8921_ncp: ncp {};
-			};
-		};
-
-		usb1: usb@12500000 {
-			compatible = "qcom,ci-hdrc";
-			reg = <0x12500000 0x200>,
-			      <0x12500200 0x200>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
-			clock-names = "core", "iface";
-			assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
-			assigned-clock-rates = <60000000>;
-			resets = <&gcc USB_HS1_RESET>;
-			reset-names = "core";
-			phy_type = "ulpi";
-			ahb-burst-config = <0>;
-			phys = <&usb_hs1_phy>;
-			phy-names = "usb-phy";
-			status = "disabled";
-			#reset-cells = <1>;
-
-			ulpi {
-				usb_hs1_phy: phy {
-					compatible = "qcom,usb-hs-phy-apq8064",
-						     "qcom,usb-hs-phy";
-					clocks = <&sleep_clk>, <&cxo_board>;
-					clock-names = "sleep", "ref";
-					resets = <&usb1 0>;
-					reset-names = "por";
-					#phy-cells = <0>;
-				};
-			};
-		};
-
-		usb3: usb@12520000 {
-			compatible = "qcom,ci-hdrc";
-			reg = <0x12520000 0x200>,
-			      <0x12520200 0x200>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc USB_HS3_XCVR_CLK>, <&gcc USB_HS3_H_CLK>;
-			clock-names = "core", "iface";
-			assigned-clocks = <&gcc USB_HS3_XCVR_CLK>;
-			assigned-clock-rates = <60000000>;
-			resets = <&gcc USB_HS3_RESET>;
-			reset-names = "core";
-			phy_type = "ulpi";
-			ahb-burst-config = <0>;
-			phys = <&usb_hs3_phy>;
-			phy-names = "usb-phy";
-			status = "disabled";
-			#reset-cells = <1>;
-
-			ulpi {
-				usb_hs3_phy: phy {
-					compatible = "qcom,usb-hs-phy-apq8064",
-						     "qcom,usb-hs-phy";
-					#phy-cells = <0>;
-					clocks = <&sleep_clk>, <&cxo_board>;
-					clock-names = "sleep", "ref";
-					resets = <&usb3 0>;
-					reset-names = "por";
-				};
-			};
-		};
-
-		usb4: usb@12530000 {
-			compatible = "qcom,ci-hdrc";
-			reg = <0x12530000 0x200>,
-			      <0x12530200 0x200>;
-			interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc USB_HS4_XCVR_CLK>, <&gcc USB_HS4_H_CLK>;
-			clock-names = "core", "iface";
-			assigned-clocks = <&gcc USB_HS4_XCVR_CLK>;
-			assigned-clock-rates = <60000000>;
-			resets = <&gcc USB_HS4_RESET>;
-			reset-names = "core";
-			phy_type = "ulpi";
-			ahb-burst-config = <0>;
-			phys = <&usb_hs4_phy>;
-			phy-names = "usb-phy";
-			status = "disabled";
-			#reset-cells = <1>;
-
-			ulpi {
-				usb_hs4_phy: phy {
-					compatible = "qcom,usb-hs-phy-apq8064",
-						     "qcom,usb-hs-phy";
-					#phy-cells = <0>;
-					clocks = <&sleep_clk>, <&cxo_board>;
-					clock-names = "sleep", "ref";
-					resets = <&usb4 0>;
-					reset-names = "por";
-				};
-			};
-		};
-
-		sata_phy0: phy@1b400000 {
-			compatible = "qcom,apq8064-sata-phy";
-			status = "disabled";
-			reg = <0x1b400000 0x200>;
-			reg-names = "phy_mem";
-			clocks = <&gcc SATA_PHY_CFG_CLK>;
-			clock-names = "cfg";
-			#phy-cells = <0>;
-		};
-
-		sata0: sata@29000000 {
-			compatible = "qcom,apq8064-ahci", "generic-ahci";
-			status	 = "disabled";
-			reg	 = <0x29000000 0x180>;
-			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&gcc SFAB_SATA_S_H_CLK>,
-				 <&gcc SATA_H_CLK>,
-				 <&gcc SATA_A_CLK>,
-				 <&gcc SATA_RXOOB_CLK>,
-				 <&gcc SATA_PMALIVE_CLK>;
-			clock-names = "slave_iface",
-				      "iface",
-				      "bus",
-				      "rxoob",
-				      "core_pmalive";
-
-			assigned-clocks = <&gcc SATA_RXOOB_CLK>,
-					  <&gcc SATA_PMALIVE_CLK>;
-			assigned-clock-rates = <100000000>, <100000000>;
-
-			phys = <&sata_phy0>;
-			phy-names = "sata-phy";
-			ports-implemented = <0x1>;
-		};
-
-		/* Temporary fixed regulator */
-		sdcc1bam: dma-controller@12402000{
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12402000 0x8000>;
-			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC1_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		sdcc3bam: dma-controller@12182000{
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12182000 0x8000>;
-			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC3_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		sdcc4bam: dma-controller@121c2000{
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x121c2000 0x8000>;
-			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC4_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			sdcc1: mmc@12400000 {
-				status = "disabled";
-				compatible = "arm,pl18x", "arm,primecell";
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdcc1_pins>;
-				arm,primecell-periphid = <0x00051180>;
-				reg = <0x12400000 0x2000>;
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				max-frequency = <96000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-				dma-names = "tx", "rx";
-			};
-
-			sdcc3: mmc@12180000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x12180000 0x2000>;
-				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <192000000>;
-				no-1-8-v;
-				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
-				dma-names = "tx", "rx";
-			};
-
-			sdcc4: mmc@121c0000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x121c0000 0x2000>;
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <48000000>;
-				dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
-				dma-names = "tx", "rx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdc4_gpios>;
-			};
-		};
-
-		tcsr: syscon@1a400000 {
-			compatible = "qcom,tcsr-apq8064", "syscon";
-			reg = <0x1a400000 0x100>;
-		};
-
-		gpu: adreno-3xx@4300000 {
-			compatible = "qcom,adreno-320.2", "qcom,adreno";
-			reg = <0x04300000 0x20000>;
-			reg-names = "kgsl_3d0_reg_memory";
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "kgsl_3d0_irq";
-			clock-names =
-			    "core",
-			    "iface",
-			    "mem",
-			    "mem_iface";
-			clocks =
-			    <&mmcc GFX3D_CLK>,
-			    <&mmcc GFX3D_AHB_CLK>,
-			    <&mmcc GFX3D_AXI_CLK>,
-			    <&mmcc MMSS_IMEM_AHB_CLK>;
-
-			iommus = <&gfx3d 0
-				  &gfx3d 1
-				  &gfx3d 2
-				  &gfx3d 3
-				  &gfx3d 4
-				  &gfx3d 5
-				  &gfx3d 6
-				  &gfx3d 7
-				  &gfx3d 8
-				  &gfx3d 9
-				  &gfx3d 10
-				  &gfx3d 11
-				  &gfx3d 12
-				  &gfx3d 13
-				  &gfx3d 14
-				  &gfx3d 15
-				  &gfx3d 16
-				  &gfx3d 17
-				  &gfx3d 18
-				  &gfx3d 19
-				  &gfx3d 20
-				  &gfx3d 21
-				  &gfx3d 22
-				  &gfx3d 23
-				  &gfx3d 24
-				  &gfx3d 25
-				  &gfx3d 26
-				  &gfx3d 27
-				  &gfx3d 28
-				  &gfx3d 29
-				  &gfx3d 30
-				  &gfx3d 31
-				  &gfx3d1 0
-				  &gfx3d1 1
-				  &gfx3d1 2
-				  &gfx3d1 3
-				  &gfx3d1 4
-				  &gfx3d1 5
-				  &gfx3d1 6
-				  &gfx3d1 7
-				  &gfx3d1 8
-				  &gfx3d1 9
-				  &gfx3d1 10
-				  &gfx3d1 11
-				  &gfx3d1 12
-				  &gfx3d1 13
-				  &gfx3d1 14
-				  &gfx3d1 15
-				  &gfx3d1 16
-				  &gfx3d1 17
-				  &gfx3d1 18
-				  &gfx3d1 19
-				  &gfx3d1 20
-				  &gfx3d1 21
-				  &gfx3d1 22
-				  &gfx3d1 23
-				  &gfx3d1 24
-				  &gfx3d1 25
-				  &gfx3d1 26
-				  &gfx3d1 27
-				  &gfx3d1 28
-				  &gfx3d1 29
-				  &gfx3d1 30
-				  &gfx3d1 31>;
-
-			operating-points-v2 = <&gpu_opp_table>;
-
-			gpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				opp-320000000 {
-					opp-hz = /bits/ 64 <450000000>;
-				};
-
-				opp-27000000 {
-					opp-hz = /bits/ 64 <27000000>;
-				};
-			};
-		};
-
-		mmss_sfpb: syscon@5700000 {
-			compatible = "syscon";
-			reg = <0x5700000 0x70>;
-		};
-
-		dsi0: dsi@4700000 {
-			compatible = "qcom,mdss-dsi-ctrl";
-			label = "MDSS DSI CTRL->0";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x04700000 0x200>;
-			reg-names = "dsi_ctrl";
-
-			clocks = <&mmcc DSI_M_AHB_CLK>,
-				<&mmcc DSI_S_AHB_CLK>,
-				<&mmcc AMP_AHB_CLK>,
-				<&mmcc DSI_CLK>,
-				<&mmcc DSI1_BYTE_CLK>,
-				<&mmcc DSI_PIXEL_CLK>,
-				<&mmcc DSI1_ESC_CLK>;
-			clock-names = "iface", "bus", "core_mmss",
-					"src", "byte", "pixel",
-					"core";
-
-			assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
-					<&mmcc DSI1_ESC_SRC>,
-					<&mmcc DSI_SRC>,
-					<&mmcc DSI_PIXEL_SRC>;
-			assigned-clock-parents = <&dsi0_phy 0>,
-						<&dsi0_phy 0>,
-						<&dsi0_phy 1>,
-						<&dsi0_phy 1>;
-			syscon-sfpb = <&mmss_sfpb>;
-			phys = <&dsi0_phy>;
-			phy-names = "dsi";
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					dsi0_in: endpoint {
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					dsi0_out: endpoint {
-					};
-				};
-			};
-		};
-
-
-		dsi0_phy: dsi-phy@4700200 {
-			compatible = "qcom,dsi-phy-28nm-8960";
-			#clock-cells = <1>;
-			#phy-cells = <0>;
-
-			reg = <0x04700200 0x100>,
-				<0x04700300 0x200>,
-				<0x04700500 0x5c>;
-			reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
-			clock-names = "iface", "ref";
-			clocks = <&mmcc DSI_M_AHB_CLK>,
-				 <&pxo_board>;
-			status = "disabled";
-		};
-
-
-		mdp_port0: iommu@7500000 {
-			compatible = "qcom,apq8064-iommu";
-			#iommu-cells = <1>;
-			clock-names =
-			    "smmu_pclk",
-			    "iommu_clk";
-			clocks =
-			    <&mmcc SMMU_AHB_CLK>,
-			    <&mmcc MDP_AXI_CLK>;
-			reg = <0x07500000 0x100000>;
-			interrupts =
-			    <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
-			    <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ncb = <2>;
-		};
-
-		mdp_port1: iommu@7600000 {
-			compatible = "qcom,apq8064-iommu";
-			#iommu-cells = <1>;
-			clock-names =
-			    "smmu_pclk",
-			    "iommu_clk";
-			clocks =
-			    <&mmcc SMMU_AHB_CLK>,
-			    <&mmcc MDP_AXI_CLK>;
-			reg = <0x07600000 0x100000>;
-			interrupts =
-			    <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
-			    <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ncb = <2>;
-		};
-
-		gfx3d: iommu@7c00000 {
-			compatible = "qcom,apq8064-iommu";
-			#iommu-cells = <1>;
-			clock-names =
-			    "smmu_pclk",
-			    "iommu_clk";
-			clocks =
-			    <&mmcc SMMU_AHB_CLK>,
-			    <&mmcc GFX3D_AXI_CLK>;
-			reg = <0x07c00000 0x100000>;
-			interrupts =
-			    <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			    <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ncb = <3>;
-		};
-
-		gfx3d1: iommu@7d00000 {
-			compatible = "qcom,apq8064-iommu";
-			#iommu-cells = <1>;
-			clock-names =
-			    "smmu_pclk",
-			    "iommu_clk";
-			clocks =
-			    <&mmcc SMMU_AHB_CLK>,
-			    <&mmcc GFX3D_AXI_CLK>;
-			reg = <0x07d00000 0x100000>;
-			interrupts =
-			    <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-			    <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ncb = <3>;
-		};
-
-		pcie: pci@1b500000 {
-			compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
-			reg = <0x1b500000 0x1000>,
-			      <0x1b502000 0x80>,
-			      <0x1b600000 0x100>,
-			      <0x0ff00000 0x100000>;
-			reg-names = "dbi", "elbi", "parf", "config";
-			device_type = "pci";
-			linux,pci-domain = <0>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			ranges = <0x81000000 0 0          0x0fe00000 0 0x00100000>, /* I/O */
-				 <0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* mem */
-			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-			clocks = <&gcc PCIE_A_CLK>,
-				 <&gcc PCIE_H_CLK>,
-				 <&gcc PCIE_PHY_REF_CLK>;
-			clock-names = "core", "iface", "phy";
-			resets = <&gcc PCIE_ACLK_RESET>,
-				 <&gcc PCIE_HCLK_RESET>,
-				 <&gcc PCIE_POR_RESET>,
-				 <&gcc PCIE_PCI_RESET>,
-				 <&gcc PCIE_PHY_RESET>;
-			reset-names = "axi", "ahb", "por", "pci", "phy";
-			status = "disabled";
-		};
-
-		hdmi: hdmi-tx@4a00000 {
-			compatible = "qcom,hdmi-tx-8960";
-			pinctrl-names = "default";
-			pinctrl-0 = <&hdmi_pinctrl>;
-			reg = <0x04a00000 0x2f0>;
-			reg-names = "core_physical";
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mmcc HDMI_APP_CLK>,
-				 <&mmcc HDMI_M_AHB_CLK>,
-				 <&mmcc HDMI_S_AHB_CLK>;
-			clock-names = "core",
-				      "master_iface",
-				      "slave_iface";
-
-			phys = <&hdmi_phy>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					hdmi_in: endpoint {
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					hdmi_out: endpoint {
-					};
-				};
-			};
-		};
-
-		hdmi_phy: hdmi-phy@4a00400 {
-			compatible = "qcom,hdmi-phy-8960";
-			reg = <0x4a00400 0x60>,
-			      <0x4a00500 0x100>;
-			reg-names = "hdmi_phy",
-				    "hdmi_pll";
-
-			clocks = <&mmcc HDMI_S_AHB_CLK>;
-			clock-names = "slave_iface";
-			#phy-cells = <0>;
-		};
-
-		mdp: mdp@5100000 {
-			compatible = "qcom,mdp4";
-			reg = <0x05100000 0xf0000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mmcc MDP_CLK>,
-				 <&mmcc MDP_AHB_CLK>,
-				 <&mmcc MDP_AXI_CLK>,
-				 <&mmcc MDP_LUT_CLK>,
-				 <&mmcc HDMI_TV_CLK>,
-				 <&mmcc MDP_TV_CLK>;
-			clock-names = "core_clk",
-				      "iface_clk",
-				      "bus_clk",
-				      "lut_clk",
-				      "hdmi_clk",
-				      "tv_clk";
-
-			iommus = <&mdp_port0 0
-				  &mdp_port0 2
-				  &mdp_port1 0
-				  &mdp_port1 2>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					mdp_lvds_out: endpoint {
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					mdp_dsi1_out: endpoint {
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-					mdp_dsi2_out: endpoint {
-					};
-				};
-
-				port@3 {
-					reg = <3>;
-					mdp_dtv_out: endpoint {
-					};
-				};
-			};
-		};
-
-		riva: riva-pil@3204000 {
-			compatible = "qcom,riva-pil";
-
-			reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
-			reg-names = "ccu", "dxe", "pmu";
-
-			interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal";
-
-			memory-region = <&wcnss_mem>;
-
-			vddcx-supply = <&pm8921_s3>;
-			vddmx-supply = <&pm8921_l24>;
-			vddpx-supply = <&pm8921_s4>;
-
-			status = "disabled";
-
-			iris {
-				compatible = "qcom,wcn3660";
-
-				clocks = <&cxo_board>;
-				clock-names = "xo";
-
-				vddxo-supply = <&pm8921_l4>;
-				vddrfa-supply = <&pm8921_s2>;
-				vddpa-supply = <&pm8921_l10>;
-				vdddig-supply = <&pm8921_lvs2>;
-			};
-
-			smd-edge {
-				interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
-
-				qcom,ipc = <&l2cc 8 25>;
-				qcom,smd-edge = <6>;
-
-				label = "riva";
-
-				wcnss {
-					compatible = "qcom,wcnss";
-					qcom,smd-channels = "WCNSS_CTRL";
-
-					qcom,mmio = <&riva>;
-
-					bluetooth {
-						compatible = "qcom,wcnss-bt";
-					};
-
-					wifi {
-						compatible = "qcom,wcnss-wlan";
-
-						interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-							     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
-						interrupt-names = "tx", "rx";
-
-						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
-						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
-					};
-				};
-			};
-		};
-
-		etb@1a01000 {
-			compatible = "coresight-etb10", "arm,primecell";
-			reg = <0x1a01000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			in-ports {
-				port {
-					etb_in: endpoint {
-						remote-endpoint = <&replicator_out0>;
-					};
-				};
-			};
-		};
-
-		tpiu@1a03000 {
-			compatible = "arm,coresight-tpiu", "arm,primecell";
-			reg = <0x1a03000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			in-ports {
-				port {
-					tpiu_in: endpoint {
-						remote-endpoint = <&replicator_out1>;
-					};
-				};
-			};
-		};
-
-		replicator {
-			compatible = "arm,coresight-static-replicator";
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					replicator_out0: endpoint {
-						remote-endpoint = <&etb_in>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					replicator_out1: endpoint {
-						remote-endpoint = <&tpiu_in>;
-					};
-				};
-			};
-
-			in-ports {
-				port {
-					replicator_in: endpoint {
-						remote-endpoint = <&funnel_out>;
-					};
-				};
-			};
-		};
-
-		funnel@1a04000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x1a04000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/*
-				 * Not described input ports:
-				 * 2 - connected to STM component
-				 * 3 - not-connected
-				 * 6 - not-connected
-				 * 7 - not-connected
-				 */
-				port@0 {
-					reg = <0>;
-					funnel_in0: endpoint {
-						remote-endpoint = <&etm0_out>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					funnel_in1: endpoint {
-						remote-endpoint = <&etm1_out>;
-					};
-				};
-				port@4 {
-					reg = <4>;
-					funnel_in4: endpoint {
-						remote-endpoint = <&etm2_out>;
-					};
-				};
-				port@5 {
-					reg = <5>;
-					funnel_in5: endpoint {
-						remote-endpoint = <&etm3_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					funnel_out: endpoint {
-						remote-endpoint = <&replicator_in>;
-					};
-				};
-			};
-		};
-
-		etm@1a1c000 {
-			compatible = "arm,coresight-etm3x", "arm,primecell";
-			reg = <0x1a1c000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU0>;
-
-			out-ports {
-				port {
-					etm0_out: endpoint {
-						remote-endpoint = <&funnel_in0>;
-					};
-				};
-			};
-		};
-
-		etm@1a1d000 {
-			compatible = "arm,coresight-etm3x", "arm,primecell";
-			reg = <0x1a1d000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU1>;
-
-			out-ports {
-				port {
-					etm1_out: endpoint {
-						remote-endpoint = <&funnel_in1>;
-					};
-				};
-			};
-		};
-
-		etm@1a1e000 {
-			compatible = "arm,coresight-etm3x", "arm,primecell";
-			reg = <0x1a1e000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU2>;
-
-			out-ports {
-				port {
-					etm2_out: endpoint {
-						remote-endpoint = <&funnel_in4>;
-					};
-				};
-			};
-		};
-
-		etm@1a1f000 {
-			compatible = "arm,coresight-etm3x", "arm,primecell";
-			reg = <0x1a1f000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU3>;
-
-			out-ports {
-				port {
-					etm3_out: endpoint {
-						remote-endpoint = <&funnel_in5>;
-					};
-				};
-			};
-		};
-	};
-};
-#include "qcom-apq8064-pins.dtsi"
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
deleted file mode 100644
index 3051a861ff0c..000000000000
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ /dev/null
@@ -1,308 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-
-/ {
-	model = "Qualcomm APQ8074 Dragonboard";
-	compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-		usid0 = &pm8941_0;
-		usid4 = &pm8841_0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_uart2 {
-	status = "okay";
-};
-
-&blsp2_i2c5 {
-	status = "okay";
-	clock-frequency = <200000>;
-
-	eeprom: eeprom@52 {
-		compatible = "atmel,24c128";
-		reg = <0x52>;
-		pagesize = <32>;
-		read-only;
-	};
-};
-
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs2_phy>;
-	phy-select = <&tcsr 0xb000 1>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@b {
-			status = "okay";
-			v3p3-supply = <&pm8941_l24>;
-			v1p8-supply = <&pm8941_l6>;
-			extcon = <&smbb>;
-			qcom,init-seq = /bits/ 8 <0x1 0x63>;
-		};
-	};
-};
-
-&rpm_requests {
-	pm8841-regulators {
-		compatible = "qcom,rpm-pm8841-regulators";
-
-		pm8841_s1: s1 {
-			regulator-min-microvolt = <675000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s2: s2 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s3: s3 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s4: s4 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-	};
-
-	pm8941-regulators {
-		compatible = "qcom,rpm-pm8941-regulators";
-
-		vdd_l1_l3-supply = <&pm8941_s1>;
-		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-		vdd_l4_l11-supply = <&pm8941_s1>;
-		vdd_l5_l7-supply = <&pm8941_s2>;
-		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-		vin_5vs-supply = <&pm8941_5v>;
-
-		pm8941_s1: s1 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_s2: s2 {
-			regulator-min-microvolt = <2150000>;
-			regulator-max-microvolt = <2150000>;
-			regulator-boot-on;
-		};
-
-		pm8941_s3: s3 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8941_l3: l3 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8941_l4: l4 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8941_l5: l5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l7: l7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l9: l9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8941_l10: l10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		pm8941_l11: l11 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		pm8941_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l13: l13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l14: l14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l15: l15 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pm8941_l16: l16 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pm8941_l17: l17 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pm8941_l18: l18 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pm8941_l19: l19 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		pm8941_l20: l20 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-system-load = <200000>;
-			regulator-allow-set-load;
-			regulator-boot-on;
-		};
-
-		pm8941_l21: l21 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l22: l22 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8941_l23: l23 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8941_l24: l24 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-			regulator-boot-on;
-		};
-	};
-};
-
-&sdhc_1 {
-	status = "okay";
-
-	vmmc-supply = <&pm8941_l20>;
-	vqmmc-supply = <&pm8941_s3>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-};
-
-&sdhc_2 {
-	status = "okay";
-
-	cd-gpios = <&tlmm 62 0x1>;
-	vmmc-supply = <&pm8941_l21>;
-	vqmmc-supply = <&pm8941_l13>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
-};
-
-&tlmm {
-	sdc1_on: sdc1-on {
-		clk {
-			pins = "sdc1_clk";
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		cmd-data {
-			pins = "sdc1_cmd", "sdc1_data";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
-
-	sdc2_on: sdc2-on {
-		clk {
-			pins = "sdc2_clk";
-			drive-strength = <10>;
-			bias-disable;
-		};
-
-		cmd-data {
-			pins = "sdc2_cmd", "sdc2_data";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-
-		cd {
-			pins = "gpio62";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
deleted file mode 100644
index 44cd72f1b1be..000000000000
--- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
-
-/ {
-	model = "Qualcomm APQ8084/IFC6540";
-	compatible = "qcom,apq8084-sbc", "qcom,apq8084";
-
-	aliases {
-		serial0 = &blsp2_uart2;
-		usid0 = &pma8084_0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		serial@f995e000 {
-			status = "okay";
-		};
-
-		sdhci@f9824900 {
-			bus-width = <8>;
-			non-removable;
-			status = "okay";
-		};
-
-		sdhci@f98a4900 {
-			cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
-			bus-width = <4>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
deleted file mode 100644
index 72f9255855a1..000000000000
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ /dev/null
@@ -1,531 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-apq8084.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Qualcomm APQ 8084";
-	compatible = "qcom,apq8084";
-	interrupt-parent = <&intc>;
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		smem_mem: smem_region@fa00000 {
-			reg = <0xfa00000 0x200000>;
-			no-map;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <0>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <1>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <2>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc2>;
-			qcom,saw = <&saw2>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <3>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc3>;
-			qcom,saw = <&saw3>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		L2: l2-cache {
-			compatible = "qcom,arch-cache";
-			cache-level = <2>;
-			qcom,saw = <&saw_l2>;
-		};
-
-		idle-states {
-			CPU_SPC: spc {
-				compatible = "qcom,idle-state-spc",
-						"arm,idle-state";
-				entry-latency-us = <150>;
-				exit-latency-us = <200>;
-				min-residency-us = <2000>;
-			};
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-apq8084", "qcom,scm";
-			clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
-			clock-names = "core", "bus", "iface";
-		};
-	};
-
-	thermal-zones {
-		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 5>;
-
-			trips {
-				cpu_alert0: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit0: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 6>;
-
-			trips {
-				cpu_alert1: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit1: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 7>;
-
-			trips {
-				cpu_alert2: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit2: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 8>;
-
-			trips {
-				cpu_alert3: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit3: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <GIC_PPI 7 0xf04>;
-	};
-
-	clocks {
-		xo_board: xo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-		};
-
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 2 0xf08>,
-			     <GIC_PPI 3 0xf08>,
-			     <GIC_PPI 4 0xf08>,
-			     <GIC_PPI 1 0xf08>;
-		clock-frequency = <19200000>;
-	};
-
-	smem {
-		compatible = "qcom,smem";
-
-		qcom,rpm-msg-ram = <&rpm_msg_ram>;
-		memory-region = <&smem_mem>;
-
-		hwlocks = <&tcsr_mutex 3>;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@f9000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0xf9000000 0x1000>,
-			      <0xf9002000 0x1000>;
-		};
-
-		apcs: syscon@f9011000 {
-			compatible = "syscon";
-			reg = <0xf9011000 0x1000>;
-		};
-
-		qfprom: qfprom@fc4bc000 {
-			compatible = "qcom,apq8084-qfprom", "qcom,qfprom";
-			reg = <0xfc4bc000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			tsens_calib: calib@d0 {
-				reg = <0xd0 0x18>;
-			};
-			tsens_backup: backup@440 {
-				reg = <0x440 0x10>;
-			};
-		};
-
-		tsens: thermal-sensor@fc4a8000 {
-			compatible = "qcom,msm8974-tsens";
-			reg = <0xfc4a9000 0x1000>, /* TM */
-			      <0xfc4a8000 0x1000>; /* SROT */
-			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-			nvmem-cell-names = "calib", "calib_backup";
-			#qcom,sensors = <11>;
-			#thermal-sensor-cells = <1>;
-		};
-		timer@f9020000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0xf9020000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame@f9021000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9021000 0x1000>,
-				      <0xf9022000 0x1000>;
-			};
-
-			frame@f9023000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9023000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9024000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9024000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9025000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9025000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9026000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9026000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9027000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9027000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9028000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9028000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		saw0: power-controller@f9089000 {
-			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw1: power-controller@f9099000 {
-			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw2: power-controller@f90a9000 {
-			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw3: power-controller@f90b9000 {
-			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw_l2: power-controller@f9012000 {
-			compatible = "qcom,saw2";
-			reg = <0xf9012000 0x1000>;
-			regulator;
-		};
-
-		acc0: clock-controller@f9088000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf9088000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		acc1: clock-controller@f9098000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf9098000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		acc2: clock-controller@f90a8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf90a8000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		acc3: clock-controller@f90b8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf90b8000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		restart@fc4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0xfc4ab000 0x4>;
-		};
-
-		gcc: clock-controller@fc400000 {
-			compatible = "qcom,gcc-apq8084";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0xfc400000 0x4000>;
-		};
-
-		tcsr_mutex_regs: syscon@fd484000 {
-			compatible = "syscon";
-			reg = <0xfd484000 0x2000>;
-		};
-
-		tcsr_mutex: hwlock {
-			compatible = "qcom,tcsr-mutex";
-			syscon = <&tcsr_mutex_regs 0 0x80>;
-			#hwlock-cells = <1>;
-		};
-
-		rpm_msg_ram: memory@fc428000 {
-			compatible = "qcom,rpm-msg-ram";
-			reg = <0xfc428000 0x4000>;
-		};
-
-		tlmm: pinctrl@fd510000 {
-			compatible = "qcom,apq8084-pinctrl";
-			reg = <0xfd510000 0x4000>;
-			gpio-controller;
-			gpio-ranges = <&tlmm 0 0 147>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		blsp2_uart2: serial@f995e000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf995e000 0x1000>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		mmc@f9824900 {
-			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_SDCC1_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
-			status = "disabled";
-		};
-
-		mmc@f98a4900 {
-			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&gcc GCC_SDCC2_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
-			status = "disabled";
-		};
-
-		spmi_bus: spmi@fc4cf000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg-names = "core", "intr", "cnfg";
-			reg = <0xfc4cf000 0x1000>,
-			      <0xfc4cb000 0x1000>,
-			      <0xfc4ca000 0x1000>;
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
-	};
-
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm-requests {
-				compatible = "qcom,rpm-apq8084";
-				qcom,smd-channels = "rpm_requests";
-
-				pma8084-regulators {
-					compatible = "qcom,rpm-pma8084-regulators";
-
-					pma8084_s1: s1 {};
-					pma8084_s2: s2 {};
-					pma8084_s3: s3 {};
-					pma8084_s4: s4 {};
-					pma8084_s5: s5 {};
-					pma8084_s6: s6 {};
-					pma8084_s7: s7 {};
-					pma8084_s8: s8 {};
-					pma8084_s9: s9 {};
-					pma8084_s10: s10 {};
-					pma8084_s11: s11 {};
-					pma8084_s12: s12 {};
-
-					pma8084_l1: l1 {};
-					pma8084_l2: l2 {};
-					pma8084_l3: l3 {};
-					pma8084_l4: l4 {};
-					pma8084_l5: l5 {};
-					pma8084_l6: l6 {};
-					pma8084_l7: l7 {};
-					pma8084_l8: l8 {};
-					pma8084_l9: l9 {};
-					pma8084_l10: l10 {};
-					pma8084_l11: l11 {};
-					pma8084_l12: l12 {};
-					pma8084_l13: l13 {};
-					pma8084_l14: l14 {};
-					pma8084_l15: l15 {};
-					pma8084_l16: l16 {};
-					pma8084_l17: l17 {};
-					pma8084_l18: l18 {};
-					pma8084_l19: l19 {};
-					pma8084_l20: l20 {};
-					pma8084_l21: l21 {};
-					pma8084_l22: l22 {};
-					pma8084_l23: l23 {};
-					pma8084_l24: l24 {};
-					pma8084_l25: l25 {};
-					pma8084_l26: l26 {};
-					pma8084_l27: l27 {};
-
-					pma8084_lvs1: lvs1 {};
-					pma8084_lvs2: lvs2 {};
-					pma8084_lvs3: lvs3 {};
-					pma8084_lvs4: lvs4 {};
-
-					pma8084_5vs1: 5vs1 {};
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
deleted file mode 100644
index 03bb9e1768c4..000000000000
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ /dev/null
@@ -1,112 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
-
-	aliases {
-		serial0 = &blsp1_uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		pinctrl@1000000 {
-			serial_pins: serial_pinmux {
-				mux {
-					pins = "gpio60", "gpio61";
-					function = "blsp_uart0";
-					bias-disable;
-				};
-			};
-
-			spi_0_pins: spi_0_pinmux {
-				pinmux {
-					function = "blsp_spi0";
-					pins = "gpio55", "gpio56", "gpio57";
-				};
-				pinmux_cs {
-					function = "gpio";
-					pins = "gpio54";
-				};
-				pinconf {
-					pins = "gpio55", "gpio56", "gpio57";
-					drive-strength = <12>;
-					bias-disable;
-				};
-				pinconf_cs {
-					pins = "gpio54";
-					drive-strength = <2>;
-					bias-disable;
-					output-high;
-				};
-			};
-		};
-
-		blsp_dma: dma-controller@7884000 {
-			status = "okay";
-		};
-
-		spi@78b5000 {
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-			cs-gpios = <&tlmm 54 0>;
-
-			mx25l25635e@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "mx25l25635e";
-				spi-max-frequency = <24000000>;
-			};
-		};
-
-		serial@78af000 {
-			pinctrl-0 = <&serial_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		cryptobam: dma-controller@8e04000 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		wifi@a000000 {
-			status = "okay";
-		};
-
-		wifi@a800000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
deleted file mode 100644
index a654d3c22c4f..000000000000
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-ipq8064-v1.0.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
-	compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
-
-	soc {
-		pinmux@800000 {
-			buttons_pins: buttons_pins {
-				mux {
-					pins = "gpio54", "gpio65";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-		};
-
-		gsbi@16300000 {
-			i2c@16380000 {
-				status = "okay";
-				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c4_pins>;
-				pinctrl-names = "default";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
deleted file mode 100644
index 5a65cce2500c..000000000000
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ /dev/null
@@ -1,359 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-ipq8064.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "MikroTik RB3011UiAS-RM";
-	compatible = "mikrotik,rb3011";
-
-	aliases {
-		serial0 = &gsbi7_serial;
-		ethernet0 = &gmac0;
-		ethernet1 = &gmac3;
-		mdio-gpio0 = &mdio0;
-		mdio-gpio1 = &mdio1;
-	};
-
-	chosen {
-		bootargs = "loglevel=8 console=ttyMSM0,115200";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@42000000 {
-		reg = <0x42000000 0x3e000000>;
-		device_type = "memory";
-	};
-
-	mdio0: mdio-0 {
-		status = "okay";
-		compatible = "virtual,mdio-gpio";
-		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
-			<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pinctrl-0 = <&mdio0_pins>;
-		pinctrl-names = "default";
-
-		switch0: switch@10 {
-			compatible = "qca,qca8337";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			dsa,member = <0 0>;
-
-			pinctrl-0 = <&sw0_reset_pin>;
-			pinctrl-names = "default";
-
-			reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-			reg = <0x10>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				switch0cpu: port@0 {
-					reg = <0>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "rgmii-id";
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "sw1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "sw2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "sw3";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "sw4";
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "sw5";
-				};
-			};
-		};
-	};
-
-	mdio1: mdio-1 {
-		status = "okay";
-		compatible = "virtual,mdio-gpio";
-		gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
-			<&qcom_pinmux 10 GPIO_ACTIVE_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pinctrl-0 = <&mdio1_pins>;
-		pinctrl-names = "default";
-
-		switch1: switch@14 {
-			compatible = "qca,qca8337";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			dsa,member = <1 0>;
-
-			pinctrl-0 = <&sw1_reset_pin>;
-			pinctrl-names = "default";
-
-			reset-gpios = <&qcom_pinmux 17 GPIO_ACTIVE_LOW>;
-			reg = <0x10>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				switch1cpu: port@0 {
-					reg = <0>;
-					label = "cpu";
-					ethernet = <&gmac3>;
-					phy-mode = "sgmii";
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "sw6";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "sw7";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "sw8";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "sw9";
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "sw10";
-				};
-			};
-		};
-	};
-
-	soc {
-		gsbi5: gsbi@1a200000 {
-			qcom,mode = <GSBI_PROT_SPI>;
-			status = "okay";
-
-			spi4: spi@1a280000 {
-				status = "okay";
-				spi-max-frequency = <50000000>;
-
-				pinctrl-0 = <&spi_pins>;
-				pinctrl-names = "default";
-
-				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-				norflash: flash@0 {
-					compatible = "jedec,spi-nor";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-
-					partition@0 {
-						label = "RouterBoot";
-						reg = <0x0 0x40000>;
-					};
-				};
-			};
-		};
-
-		gpio-keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&buttons_pins>;
-			pinctrl-names = "default";
-
-			button {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&leds_pins>;
-			pinctrl-names = "default";
-
-			led@7 {
-				label = "rb3011:green:user";
-				color = <LED_COLOR_ID_GREEN>;
-				gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-		};
-
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&gmac0 {
-	status = "okay";
-
-	phy-mode = "rgmii";
-	qcom,id = <0>;
-	phy-handle = <&switch0cpu>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac3 {
-	status = "okay";
-
-	phy-mode = "sgmii";
-	qcom,id = <3>;
-	phy-handle = <&switch1cpu>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gsbi7 {
-	status = "okay";
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-};
-
-&gsbi7_serial {
-	status = "okay";
-};
-
-&hs_phy_1 {
-	status = "okay";
-};
-
-&nand {
-	status = "okay";
-
-	nandcs@0 {
-		compatible = "qcom,nandcs";
-		reg = <0>;
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			boot@0 {
-				label = "RouterBoard NAND 1 Boot";
-				reg = <0x0000000 0x0800000>;
-			};
-
-			main@800000 {
-				label = "RouterBoard NAND 1 Main";
-				reg = <0x0800000 0x7800000>;
-			};
-		};
-	};
-};
-
-&qcom_pinmux {
-	buttons_pins: buttons_pins {
-		mux {
-			pins = "gpio66";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	leds_pins: leds_pins {
-		mux {
-			pins = "gpio33";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio1_pins {
-		mux {
-			pins = "gpio10", "gpio11";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	sw0_reset_pin: sw0_reset_pin {
-		mux {
-			pins = "gpio16";
-			drive-strength = <16>;
-			function = "gpio";
-			bias-disable;
-			input-disable;
-		};
-	};
-
-	sw1_reset_pin: sw1_reset_pin {
-		mux {
-			pins = "gpio17";
-			drive-strength = <16>;
-			function = "gpio";
-			bias-disable;
-			input-disable;
-		};
-	};
-
-	usb1_pwr_en_pins: usb1_pwr_en_pins {
-		mux {
-			pins = "gpio4";
-			function = "gpio";
-			drive-strength = <16>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&ss_phy_1 {
-	status = "okay";
-};
-
-&usb3_1 {
-	pinctrl-0 = <&usb1_pwr_en_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
deleted file mode 100644
index 411c8d63c38e..000000000000
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ /dev/null
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-ipq8064.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ8064-v1.0";
-
-	aliases {
-		serial0 = &gsbi4_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		gsbi@16300000 {
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "okay";
-
-			serial@16340000 {
-				status = "okay";
-			};
-		};
-
-		gsbi5: gsbi@1a200000 {
-			qcom,mode = <GSBI_PROT_SPI>;
-			status = "okay";
-
-			spi4: spi@1a280000 {
-				status = "okay";
-				spi-max-frequency = <50000000>;
-
-				pinctrl-0 = <&spi_pins>;
-				pinctrl-names = "default";
-
-				cs-gpios = <&qcom_pinmux 20 0>;
-
-				flash: flash@0 {
-					compatible = "s25fl256s1";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-
-					partition@0 {
-						label = "rootfs";
-						reg = <0x0 0x1000000>;
-					};
-
-					partition@1 {
-						label = "scratch";
-						reg = <0x1000000 0x1000000>;
-					};
-				};
-			};
-		};
-
-		sata-phy@1b400000 {
-			status = "okay";
-		};
-
-		sata@29000000 {
-			ports-implemented = <0x1>;
-			status = "okay";
-		};
-
-		gpio-keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&buttons_pins>;
-			pinctrl-names = "default";
-
-			button-1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-			button-2 {
-				label = "wps";
-				linux,code = <KEY_WPS_BUTTON>;
-				gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&leds_pins>;
-			pinctrl-names = "default";
-
-			led@7 {
-				label = "led_usb1";
-				gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "usbdev";
-				default-state = "off";
-			};
-
-			led@8 {
-				label = "led_usb3";
-				gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "usbdev";
-				default-state = "off";
-			};
-
-			led@9 {
-				label = "status_led_fail";
-				function = LED_FUNCTION_STATUS;
-				gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-
-			led@26 {
-				label = "sata_led";
-				gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-
-			led@53 {
-				label = "status_led_pass";
-				function = LED_FUNCTION_STATUS;
-				gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
deleted file mode 100644
index 0827de5426c1..000000000000
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * Device Tree Source for mangOH Green Board with WP8548 Module
- *
- * Copyright (C) 2016 BayLibre, SAS.
- * Author : Neil Armstrong <narmstrong@baylibre.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/input/input.h>
-
-#include "qcom-mdm9615-wp8548.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "MangOH Green with WP8548 Module";
-	compatible = "swir,mangoh-green-wp8548", "swir,wp8548", "qcom,mdm9615";
-
-	aliases {
-		spi0 = &gsbi3_spi;
-		serial0 = &gsbi4_serial;
-		serial1 = &gsbi5_serial;
-		i2c0 = &gsbi5_i2c;
-		mmc0 = &sdcc1;
-	};
-
-	chosen {
-		stdout-path = "serial1:115200n8";
-	};
-};
-
-&msmgpio {
-	/* MangOH GPIO Mapping :
-	 * - 2 : GPIOEXP_INT2
-	 * - 7 : IOT1_GPIO2
-	 * - 8 : IOT0_GPIO4
-	 * - 13: IOT0_GPIO3
-	 * - 21: IOT1_GPIO4
-	 * - 22: IOT2_GPIO1
-	 * - 23: IOT2_GPIO2
-	 * - 24: IOT2_GPIO3
-	 * - 25: IOT1_GPIO1
-	 * - 32: IOT1_GPIO3
-	 * - 33: IOT0_GPIO2
-	 * - 42: IOT0_GPIO1 and SD Card Detect
-	 */
-
-	gpioext1_pins: gpioext1_pins {
-		pins {
-			pins = "gpio2";
-			function = "gpio";
-			input-enable;
-			bias-disable;
-		};
-	};
-
-	sdc_cd_pins: sdc_cd_pins {
-		pins {
-			pins = "gpio42";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-};
-
-&gsbi3_spi {
-	spi@0 {
-		compatible = "swir,mangoh-iotport-spi";
-		spi-max-frequency = <24000000>;
-		reg = <0>;
-	};
-};
-
-&gsbi5_i2c {
-	mux@71 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-
-		i2c_iot0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c_iot1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		i2c_iot2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			usbhub: hub@8 {
-				compatible = "smsc,usb3503a";
-				reg = <0x8>;
-				connect-gpios = <&gpioext2 1 GPIO_ACTIVE_HIGH>;
-				intn-gpios = <&gpioext2 0 GPIO_ACTIVE_HIGH>;
-				initial-mode = <1>;
-			};
-		};
-
-		i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			gpioext0: gpio@3e {
-				/* GPIO Expander 0 Mapping :
-				 * - 0: ARDUINO_RESET_Level shift
-				 * - 1: BattChrgr_PG_N
-				 * - 2: BattGauge_GPIO
-				 * - 3: LED_ON (out active high)
-				 * - 4: ATmega_reset_GPIO
-				 * - 5: X
-				 * - 6: PCM_ANALOG_SELECT (out active high)
-				 * - 7: X
-				 * - 8: Board_rev_res1 (in)
-				 * - 9: Board_rev_res2 (in)
-				 * - 10: UART_EXP1_ENn (out active low / pull-down)
-				 * - 11: UART_EXP1_IN (out pull-down)
-				 * - 12: UART_EXP2_IN (out pull-down)
-				 * - 13: SDIO_SEL (out pull-down)
-				 * - 14: SPI_EXP1_ENn (out active low / pull-down)
-				 * - 15: SPI_EXP1_IN (out pull-down)
-				 */
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "semtech,sx1509q";
-				reg = <0x3e>;
-				interrupt-parent = <&gpioext1>;
-				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-
-				probe-reset;
-
-				gpio-controller;
-				interrupt-controller;
-			};
-		};
-
-		i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-
-			gpioext1: gpio@3f {
-				/* GPIO Expander 1 Mapping :
-				 * - 0: GPIOEXP_INT1
-				 * - 1: Battery detect
-				 * - 2: GPIO_SCF3_RESET
-				 * - 3: LED_CARD_DETECT_IOT0 (in)
-				 * - 4: LED_CARD_DETECT_IOT1 (in)
-				 * - 5: LED_CARD_DETECT_IOT2 (in)
-				 * - 6: UIM2_PWM_SELECT
-				 * - 7: UIM2_M2_S_SELECT
-				 * - 8: TP900
-				 * - 9: SENSOR_INT1 (in)
-				 * - 10: SENSOR_INT2 (in)
-				 * - 11: CARD_DETECT_IOT0 (in pull-up)
-				 * - 12: CARD_DETECT_IOT2 (in pull-up)
-				 * - 13: CARD_DETECT_IOT1 (in pull-up)
-				 * - 14: GPIOEXP_INT3 (in active low / pull-up)
-				 * - 15: BattChrgr_INT_N
-				 */
-				pinctrl-0 = <&gpioext1_pins>;
-				pinctrl-names = "default";
-
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "semtech,sx1509q";
-				reg = <0x3f>;
-				interrupt-parent = <&msmgpio>;
-				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-
-				probe-reset;
-
-				gpio-controller;
-				interrupt-controller;
-			};
-		};
-
-		i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-
-			gpioext2: gpio@70 {
-				/* GPIO Expander 2 Mapping :
-				 * - 0: USB_HUB_INTn
-				 * - 1: HUB_CONNECT
-				 * - 2: GPIO_IOT2_RESET (out active low / pull-up)
-				 * - 3: GPIO_IOT1_RESET (out active low / pull-up)
-				 * - 4: GPIO_IOT0_RESET (out active low / pull-up)
-				 * - 5: TP901
-				 * - 6: TP902
-				 * - 7: TP903
-				 * - 8: UART_EXP2_ENn (out active low / pull-down)
-				 * - 9: PCM_EXP1_ENn (out active low)
-				 * - 10: PCM_EXP1_SEL (out)
-				 * - 11: ARD_FTDI
-				 * - 12: TP904
-				 * - 13: TP905
-				 * - 14: TP906
-				 * - 15: RS232_Enable (out active high / pull-up)
-				 */
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "semtech,sx1509q";
-				reg = <0x70>;
-				interrupt-parent = <&gpioext1>;
-				interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
-
-				probe-reset;
-
-				gpio-controller;
-				interrupt-controller;
-			};
-		};
-
-		i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&sdcc1 {
-	pinctrl-0 = <&sdc_cd_pins>;
-	pinctrl-names = "default";
-	disable-wp;
-	cd-gpios = <&msmgpio 42 GPIO_ACTIVE_LOW>; /* Active low CD */
-};
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
deleted file mode 100644
index 49de1821ac3a..000000000000
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Device Tree Source for Sierra Wireless WP8548 Module
- *
- * Copyright (C) 2016 BayLibre, SAS.
- * Author : Neil Armstrong <narmstrong@baylibre.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "qcom-mdm9615.dtsi"
-
-/ {
-	model = "Sierra Wireless WP8548 Module";
-	compatible = "swir,wp8548", "qcom,mdm9615";
-
-	memory@48000000 {
-		device_type = "memory";
-		reg = <0x48000000 0x7F00000>;
-	};
-};
-
-&msmgpio {
-	pinctrl-0 = <&reset_out_pins>;
-	pinctrl-names = "default";
-
-	gsbi3_pins: gsbi3_pins {
-		mux {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "gsbi3";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	gsbi4_pins: gsbi4_pins {
-		mux {
-			pins = "gpio12", "gpio13", "gpio14", "gpio15";
-			function = "gsbi4";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	gsbi5_i2c_pins: gsbi5_i2c_pins {
-		pin16 {
-			pins = "gpio16";
-			function = "gsbi5_i2c";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		pin17 {
-			pins = "gpio17";
-			function = "gsbi5_i2c";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	gsbi5_uart_pins: gsbi5_uart_pins {
-		mux {
-			pins = "gpio18", "gpio19";
-			function = "gsbi5_uart";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	reset_out_pins: reset_out_pins {
-		pins {
-			pins = "gpio66";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-			output-high;
-		};
-	};
-};
-
-&pmicgpio {
-	usb_vbus_5v_pins: usb-vbus-5v-state {
-		pins = "gpio4";
-		function = "normal";
-		output-high;
-		bias-disable;
-		qcom,drive-strength = <1>;
-		power-source = <2>;
-	};
-};
-
-&gsbi3 {
-	status = "okay";
-	qcom,mode = <GSBI_PROT_SPI>;
-};
-
-&gsbi3_spi {
-	status = "okay";
-	pinctrl-0 = <&gsbi3_pins>;
-	pinctrl-names = "default";
-	assigned-clocks = <&gcc GSBI3_QUP_CLK>;
-	assigned-clock-rates = <24000000>;
-};
-
-&gsbi4 {
-	status = "okay";
-	qcom,mode = <GSBI_PROT_UART_W_FC>;
-};
-
-&gsbi4_serial {
-	status = "okay";
-	pinctrl-0 = <&gsbi4_pins>;
-	pinctrl-names = "default";
-};
-
-&gsbi5 {
-	status = "okay";
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-};
-
-&gsbi5_i2c {
-	status = "okay";
-	clock-frequency = <200000>;
-	pinctrl-0 = <&gsbi5_i2c_pins>;
-	pinctrl-names = "default";
-};
-
-&gsbi5_serial {
-	status = "okay";
-	pinctrl-0 = <&gsbi5_uart_pins>;
-	pinctrl-names = "default";
-};
-
-&sdcc1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
deleted file mode 100644
index b47c86412de2..000000000000
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ /dev/null
@@ -1,552 +0,0 @@
-/*
- * Device Tree Source for Qualcomm MDM9615 SoC
- *
- * Copyright (C) 2016 BayLibre, SAS.
- * Author : Neil Armstrong <narmstrong@baylibre.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-mdm9615.h>
-#include <dt-bindings/reset/qcom,gcc-mdm9615.h>
-#include <dt-bindings/mfd/qcom-rpm.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Qualcomm MDM9615";
-	compatible = "qcom,mdm9615";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a5";
-			device_type = "cpu";
-			next-level-cache = <&L2>;
-		};
-	};
-
-	cpu-pmu {
-		compatible = "arm,cortex-a5-pmu";
-		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	clocks {
-		cxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-		};
-	};
-
-	regulators {
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
-		};
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		L2: cache-controller@2040000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x02040000 0x1000>;
-			arm,data-latency = <2 2 0>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		intc: interrupt-controller@2000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x02000000 0x1000>,
-			      <0x02002000 0x1000>;
-		};
-
-		timer@200a000 {
-			compatible = "qcom,kpss-timer", "qcom,msm-timer";
-			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
-				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
-				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
-			reg = <0x0200a000 0x100>;
-			clock-frequency = <27000000>,
-					  <32768>;
-			cpu-offset = <0x80000>;
-		};
-
-		msmgpio: pinctrl@800000 {
-			compatible = "qcom,mdm9615-pinctrl";
-			gpio-controller;
-			gpio-ranges = <&msmgpio 0 0 88>;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x800000 0x4000>;
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-mdm9615";
-			#clock-cells = <1>;
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0x900000 0x4000>;
-		};
-
-		lcc: clock-controller@28000000 {
-			compatible = "qcom,lcc-mdm9615";
-			reg = <0x28000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		l2cc: clock-controller@2011000 {
-			compatible = "qcom,kpss-gcc", "syscon";
-			reg = <0x02011000 0x1000>;
-		};
-
-		rng@1a500000 {
-			compatible = "qcom,prng";
-			reg = <0x1a500000 0x200>;
-			clocks = <&gcc PRNG_CLK>;
-			clock-names = "core";
-			assigned-clocks = <&gcc PRNG_CLK>;
-			assigned-clock-rates = <32000000>;
-		};
-
-		gsbi2: gsbi@16100000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <2>;
-			reg = <0x16100000 0x100>;
-			clocks = <&gcc GSBI2_H_CLK>;
-			clock-names = "iface";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			gsbi2_i2c: i2c@16180000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x16180000 0x1000>;
-				interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		gsbi3: gsbi@16200000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <3>;
-			reg = <0x16200000 0x100>;
-			clocks = <&gcc GSBI3_H_CLK>;
-			clock-names = "iface";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			gsbi3_spi: spi@16280000 {
-				compatible = "qcom,spi-qup-v1.1.1";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x16280000 0x1000>;
-				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-				spi-max-frequency = <24000000>;
-
-				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		gsbi4: gsbi@16300000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <4>;
-			reg = <0x16300000 0x100>;
-			clocks = <&gcc GSBI4_H_CLK>;
-			clock-names = "iface";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi4_serial: serial@16340000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16340000 0x1000>,
-				      <0x16300000 0x1000>;
-				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		gsbi5: gsbi@16400000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <5>;
-			reg = <0x16400000 0x100>;
-			clocks = <&gcc GSBI5_H_CLK>;
-			clock-names = "iface";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi5_i2c: i2c@16480000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x16480000 0x1000>;
-				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-
-				/* QUP clock is not initialized, set rate */
-				assigned-clocks = <&gcc GSBI5_QUP_CLK>;
-				assigned-clock-rates = <24000000>;
-
-				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi5_serial: serial@16440000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16440000 0x1000>,
-				      <0x16400000 0x1000>;
-				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		qcom,ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic@0 {
-				compatible = "qcom,pm8018", "qcom,pm8921";
-				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pwrkey@1c {
-					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
-						     <51 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				pmicmpp: mpps@50 {
-					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pmicmpp 0 0 6>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-
-				pmicgpio: gpio@150 {
-					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pmicgpio 0 0 6>;
-					#gpio-cells = <2>;
-				};
-			};
-		};
-
-		sdcc1bam: dma-controller@12182000{
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12182000 0x8000>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC1_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		sdcc2bam: dma-controller@12142000{
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12142000 0x8000>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC2_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			sdcc1: mmc@12180000 {
-				status = "disabled";
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg = <0x12180000 0x2000>;
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				max-frequency = <48000000>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				vmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-				dma-names = "tx", "rx";
-				assigned-clocks = <&gcc SDC1_CLK>;
-				assigned-clock-rates = <400000>;
-			};
-
-			sdcc2: mmc@12140000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x12140000 0x2000>;
-				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <48000000>;
-				no-1-8-v;
-				vmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
-				dma-names = "tx", "rx";
-				assigned-clocks = <&gcc SDC2_CLK>;
-				assigned-clock-rates = <400000>;
-			};
-		};
-
-		tcsr: syscon@1a400000 {
-			compatible = "qcom,tcsr-mdm9615", "syscon";
-			reg = <0x1a400000 0x100>;
-		};
-
-		rpm: rpm@108000 {
-			compatible = "qcom,rpm-mdm9615";
-			reg = <0x108000 0x1000>;
-
-			qcom,ipc = <&l2cc 0x8 2>;
-
-			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ack", "err", "wakeup";
-
-			regulators {
-				compatible = "qcom,rpm-pm8018-regulators";
-
-				vin_lvs1-supply = <&pm8018_s3>;
-
-				vdd_l7-supply = <&pm8018_s4>;
-				vdd_l8-supply = <&pm8018_s3>;
-				vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
-
-				/* Buck SMPS */
-				pm8018_s1: s1 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s2: s2 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s3: s3 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s4: s4 {
-					regulator-min-microvolt = <2100000>;
-					regulator-max-microvolt = <2200000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s5: s5 {
-					regulator-always-on;
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				/* PMOS LDO */
-				pm8018_l2: l2 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8018_l3: l3 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8018_l4: l4 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-
-				pm8018_l5: l5 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8018_l6: l6 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8018_l7: l7 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				pm8018_l8: l8 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				pm8018_l9: l9 {
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-
-				pm8018_l10: l10 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l11: l11 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l12: l12 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l13: l13 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8018_l14: l14 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				/* Low Voltage Switch */
-				pm8018_lvs1: lvs1 {
-					bias-pull-down;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
deleted file mode 100644
index 0b5effdb269a..000000000000
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ /dev/null
@@ -1,528 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2020, The Linux Foundation. All rights reserved.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-msm8974.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/reset/qcom,gcc-msm8974.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	chosen { };
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	clocks {
-		xo_board: xo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-		};
-
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-msm8226", "qcom,scm";
-			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
-			clock-names = "core", "bus", "iface";
-		};
-	};
-
-	tcsr_mutex: hwlock {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_block 0 0x80>;
-
-		#hwlock-cells = <1>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		smem_region: smem@3000000 {
-			reg = <0x3000000 0x100000>;
-			no-map;
-		};
-	};
-
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8226";
-				qcom,smd-channels = "rpm_requests";
-
-				rpmpd: power-controller {
-					compatible = "qcom,msm8226-rpmpd";
-					#power-domain-cells = <1>;
-					operating-points-v2 = <&rpmpd_opp_table>;
-
-					rpmpd_opp_table: opp-table {
-						compatible = "operating-points-v2";
-
-						rpmpd_opp_ret: opp1 {
-							opp-level = <1>;
-						};
-						rpmpd_opp_svs_krait: opp2 {
-							opp-level = <2>;
-						};
-						rpmpd_opp_svs_soc: opp3 {
-							opp-level = <3>;
-						};
-						rpmpd_opp_nom: opp4 {
-							opp-level = <4>;
-						};
-						rpmpd_opp_turbo: opp5 {
-							opp-level = <5>;
-						};
-						rpmpd_opp_super_turbo: opp6 {
-							opp-level = <6>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	smem {
-		compatible = "qcom,smem";
-
-		memory-region = <&smem_region>;
-		qcom,rpm-msg-ram = <&rpm_msg_ram>;
-
-		hwlocks = <&tcsr_mutex 3>;
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		intc: interrupt-controller@f9000000 {
-			compatible = "qcom,msm-qgic2";
-			reg = <0xf9000000 0x1000>,
-			      <0xf9002000 0x1000>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-		};
-
-		apcs: syscon@f9011000 {
-			compatible = "syscon";
-			reg = <0xf9011000 0x1000>;
-		};
-
-		sdhc_1: mmc@f9824900 {
-			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_SDCC1_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdhc1_default_state>;
-			status = "disabled";
-		};
-
-		sdhc_2: mmc@f98a4900 {
-			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&gcc GCC_SDCC2_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdhc2_default_state>;
-			status = "disabled";
-		};
-
-		sdhc_3: mmc@f9864900 {
-			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC3_APPS_CLK>,
-				 <&gcc GCC_SDCC3_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdhc3_default_state>;
-			status = "disabled";
-		};
-
-		blsp1_uart1: serial@f991d000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf991d000 0x1000>;
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		blsp1_uart3: serial@f991f000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf991f000 0x1000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		blsp1_uart4: serial@f9920000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf9920000 0x1000>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		blsp1_i2c1: i2c@f9923000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9923000 0x1000>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_i2c1_pins>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp1_i2c2: i2c@f9924000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9924000 0x1000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_i2c2_pins>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp1_i2c3: i2c@f9925000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9925000 0x1000>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_i2c3_pins>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp1_i2c4: i2c@f9926000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9926000 0x1000>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_i2c4_pins>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp1_i2c5: i2c@f9927000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9927000 0x1000>;
-			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_i2c5_pins>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		usb: usb@f9a55000 {
-			compatible = "qcom,ci-hdrc";
-			reg = <0xf9a55000 0x200>,
-			      <0xf9a55200 0x200>;
-			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
-				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
-			clock-names = "iface", "core";
-			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
-			assigned-clock-rates = <75000000>;
-			resets = <&gcc GCC_USB_HS_BCR>;
-			reset-names = "core";
-			phy_type = "ulpi";
-			dr_mode = "otg";
-			hnp-disable;
-			srp-disable;
-			adp-disable;
-			ahb-burst-config = <0>;
-			phy-names = "usb-phy";
-			phys = <&usb_hs_phy>;
-			status = "disabled";
-			#reset-cells = <1>;
-
-			ulpi {
-				usb_hs_phy: phy {
-					compatible = "qcom,usb-hs-phy-msm8226",
-						     "qcom,usb-hs-phy";
-					#phy-cells = <0>;
-					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
-					clock-names = "ref", "sleep";
-					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
-					reset-names = "phy", "por";
-					qcom,init-seq = /bits/ 8 <0x0 0x44
-						0x1 0x68 0x2 0x24 0x3 0x13>;
-				};
-			};
-		};
-
-		gcc: clock-controller@fc400000 {
-			compatible = "qcom,gcc-msm8226";
-			reg = <0xfc400000 0x4000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-		};
-
-		tlmm: pinctrl@fd510000 {
-			compatible = "qcom,msm8226-pinctrl";
-			reg = <0xfd510000 0x4000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 117>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-
-			blsp1_i2c1_pins: blsp1-i2c1 {
-				pins = "gpio2", "gpio3";
-				function = "blsp_i2c1";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c2_pins: blsp1-i2c2 {
-				pins = "gpio6", "gpio7";
-				function = "blsp_i2c2";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c3_pins: blsp1-i2c3 {
-				pins = "gpio10", "gpio11";
-				function = "blsp_i2c3";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c4_pins: blsp1-i2c4 {
-				pins = "gpio14", "gpio15";
-				function = "blsp_i2c4";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c5_pins: blsp1-i2c5 {
-				pins = "gpio18", "gpio19";
-				function = "blsp_i2c5";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			sdhc1_default_state: sdhc1-default-state {
-				clk {
-					pins = "sdc1_clk";
-					drive-strength = <10>;
-					bias-disable;
-				};
-
-				cmd-data {
-					pins = "sdc1_cmd", "sdc1_data";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
-
-			sdhc2_default_state: sdhc2-default-state {
-				clk {
-					pins = "sdc2_clk";
-					drive-strength = <10>;
-					bias-disable;
-				};
-
-				cmd-data {
-					pins = "sdc2_cmd", "sdc2_data";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
-
-			sdhc3_default_state: sdhc3-default-state {
-				clk {
-					pins = "gpio44";
-					function = "sdc3";
-					drive-strength = <8>;
-					bias-disable;
-				};
-
-				cmd {
-					pins = "gpio43";
-					function = "sdc3";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-
-				data {
-					pins = "gpio39", "gpio40", "gpio41", "gpio42";
-					function = "sdc3";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
-		};
-
-		restart@fc4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0xfc4ab000 0x4>;
-		};
-
-		spmi_bus: spmi@fc4cf000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg-names = "core", "intr", "cnfg";
-			reg = <0xfc4cf000 0x1000>,
-			      <0xfc4cb000 0x1000>,
-			      <0xfc4ca000 0x1000>;
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
-
-		rng@f9bff000 {
-			compatible = "qcom,prng";
-			reg = <0xf9bff000 0x200>;
-			clocks = <&gcc GCC_PRNG_AHB_CLK>;
-			clock-names = "core";
-		};
-
-		timer@f9020000 {
-			compatible = "arm,armv7-timer-mem";
-			reg = <0xf9020000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			frame@f9021000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9021000 0x1000>,
-				      <0xf9022000 0x1000>;
-			};
-
-			frame@f9023000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9023000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9024000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9024000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9025000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9025000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9026000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9026000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9027000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9027000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9028000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9028000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		rpm_msg_ram: memory@fc428000 {
-			compatible = "qcom,rpm-msg-ram";
-			reg = <0xfc428000 0x4000>;
-		};
-
-		tcsr_mutex_block: syscon@fd484000 {
-			compatible = "syscon";
-			reg = <0xfd484000 0x2000>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 2
-				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 3
-				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 4
-				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 1
-				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
deleted file mode 100644
index 414280d9bdba..000000000000
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/input/input.h>
-
-#include "qcom-msm8660.dtsi"
-
-/ {
-	model = "Qualcomm MSM8660 SURF";
-	compatible = "qcom,msm8660-surf", "qcom,msm8660";
-
-	aliases {
-		serial0 = &gsbi12_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		gsbi@19c00000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@19c40000 {
-				status = "okay";
-			};
-		};
-
-		/* Temporary fixed regulator */
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
-		};
-
-		amba {
-			/* eMMC */
-			sdcc1: mmc@12400000 {
-				status = "okay";
-				vmmc-supply = <&vsdcc_fixed>;
-			};
-
-			/* External micro SD card */
-			sdcc3: mmc@12180000 {
-				status = "okay";
-				vmmc-supply = <&vsdcc_fixed>;
-			};
-		};
-	};
-};
-
-&pm8058 {
-	keypad@148 {
-		linux,keymap = <
-			MATRIX_KEY(0, 0, KEY_FN_F1)
-			MATRIX_KEY(0, 1, KEY_UP)
-			MATRIX_KEY(0, 2, KEY_LEFT)
-			MATRIX_KEY(0, 3, KEY_VOLUMEUP)
-			MATRIX_KEY(1, 0, KEY_FN_F2)
-			MATRIX_KEY(1, 1, KEY_RIGHT)
-			MATRIX_KEY(1, 2, KEY_DOWN)
-			MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
-			MATRIX_KEY(2, 3, KEY_ENTER)
-			MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
-			MATRIX_KEY(4, 1, KEY_UP)
-			MATRIX_KEY(4, 2, KEY_LEFT)
-			MATRIX_KEY(4, 3, KEY_HOME)
-			MATRIX_KEY(4, 4, KEY_FN_F3)
-			MATRIX_KEY(5, 0, KEY_CAMERA)
-			MATRIX_KEY(5, 1, KEY_RIGHT)
-			MATRIX_KEY(5, 2, KEY_DOWN)
-			MATRIX_KEY(5, 3, KEY_BACK)
-			MATRIX_KEY(5, 4, KEY_MENU)
-			>;
-		keypad,num-rows = <6>;
-		keypad,num-columns = <5>;
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
deleted file mode 100644
index 63a501c63cf8..000000000000
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ /dev/null
@@ -1,574 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-msm8660.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Qualcomm MSM8660";
-	compatible = "qcom,msm8660";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "qcom,scorpion";
-			enable-method = "qcom,gcc-msm8660";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@1 {
-			compatible = "qcom,scorpion";
-			enable-method = "qcom,gcc-msm8660";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	cpu-pmu {
-		compatible = "qcom,scorpion-mp-pmu";
-		interrupts = <1 9 0x304>;
-	};
-
-	clocks {
-		cxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-		};
-
-		pxo_board: pxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <27000000>;
-		};
-
-		sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	/*
-	 * These channels from the ADC are simply hardware monitors.
-	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
-	 * ADC.
-	 */
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@2080000 {
-			compatible = "qcom,msm-8660-qgic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = < 0x02080000 0x1000 >,
-			      < 0x02081000 0x1000 >;
-		};
-
-		timer@2000000 {
-			compatible = "qcom,scss-timer", "qcom,msm-timer";
-			interrupts = <1 0 0x301>,
-				     <1 1 0x301>,
-				     <1 2 0x301>;
-			reg = <0x02000000 0x100>;
-			clock-frequency = <27000000>,
-					  <32768>;
-			cpu-offset = <0x40000>;
-		};
-
-		tlmm: pinctrl@800000 {
-			compatible = "qcom,msm8660-pinctrl";
-			reg = <0x800000 0x4000>;
-
-			gpio-controller;
-			gpio-ranges = <&tlmm 0 0 173>;
-			#gpio-cells = <2>;
-			interrupts = <0 16 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-msm8660";
-			#clock-cells = <1>;
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0x900000 0x4000>;
-		};
-
-		gsbi6: gsbi@16500000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <12>;
-			reg = <0x16500000 0x100>;
-			clocks = <&gcc GSBI6_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi6_serial: serial@16540000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16540000 0x1000>,
-				      <0x16500000 0x1000>;
-				interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi6_i2c: i2c@16580000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x16580000 0x1000>;
-				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		gsbi7: gsbi@16600000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <12>;
-			reg = <0x16600000 0x100>;
-			clocks = <&gcc GSBI7_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi7_serial: serial@16640000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16640000 0x1000>,
-				      <0x16600000 0x1000>;
-				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi7_i2c: i2c@16680000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x16680000 0x1000>;
-				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		gsbi8: gsbi@19800000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <12>;
-			reg = <0x19800000 0x100>;
-			clocks = <&gcc GSBI8_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-			status = "disabled";
-
-			gsbi8_i2c: i2c@19880000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x19880000 0x1000>;
-				interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		gsbi12: gsbi@19c00000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <12>;
-			reg = <0x19c00000 0x100>;
-			clocks = <&gcc GSBI12_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi12_serial: serial@19c40000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x19c40000 0x1000>,
-				      <0x19c00000 0x1000>;
-				interrupts = <0 195 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi12_i2c: i2c@19c80000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x19c80000 0x1000>;
-				interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		external-bus@1a100000 {
-			compatible = "qcom,msm8660-ebi2";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0x0 0x1a800000 0x00800000>,
-				 <1 0x0 0x1b000000 0x00800000>,
-				 <2 0x0 0x1b800000 0x00800000>,
-				 <3 0x0 0x1d000000 0x08000000>,
-				 <4 0x0 0x1c800000 0x00800000>,
-				 <5 0x0 0x1c000000 0x00800000>;
-			reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
-			reg-names = "ebi2", "xmem";
-			clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
-			clock-names = "ebi2x", "ebi2";
-			status = "disabled";
-		};
-
-		qcom,ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-
-			pm8058: pmic@0 {
-				compatible = "qcom,pm8058";
-				interrupt-parent = <&tlmm>;
-				interrupts = <88 8>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8058_gpio: gpio@150 {
-					compatible = "qcom,pm8058-gpio",
-						     "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pm8058_gpio 0 0 44>;
-					#gpio-cells = <2>;
-
-				};
-
-				pm8058_mpps: mpps@50 {
-					compatible = "qcom,pm8058-mpp",
-						     "qcom,ssbi-mpp";
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8058_mpps 0 0 12>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				pwrkey@1c {
-					compatible = "qcom,pm8058-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <50 1>, <51 1>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				keypad@148 {
-					compatible = "qcom,pm8058-keypad";
-					reg = <0x148>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <74 1>, <75 1>;
-					debounce = <15>;
-					scan-delay = <32>;
-					row-hold = <91500>;
-				};
-
-				xoadc: xoadc@197 {
-					compatible = "qcom,pm8058-adc";
-					reg = <0x197>;
-					interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-					#io-channel-cells = <2>;
-
-					vcoin: adc-channel@0 {
-						reg = <0x00 0x00>;
-					};
-					vbat: adc-channel@1 {
-						reg = <0x00 0x01>;
-					};
-					dcin: adc-channel@2 {
-						reg = <0x00 0x02>;
-					};
-					ichg: adc-channel@3 {
-						reg = <0x00 0x03>;
-					};
-					vph_pwr: adc-channel@4 {
-						reg = <0x00 0x04>;
-					};
-					usb_vbus: adc-channel@a {
-						reg = <0x00 0x0a>;
-					};
-					die_temp: adc-channel@b {
-						reg = <0x00 0x0b>;
-					};
-					ref_625mv: adc-channel@c {
-						reg = <0x00 0x0c>;
-					};
-					ref_1250mv: adc-channel@d {
-						reg = <0x00 0x0d>;
-					};
-					ref_325mv: adc-channel@e {
-						reg = <0x00 0x0e>;
-					};
-					ref_muxoff: adc-channel@f {
-						reg = <0x00 0x0f>;
-					};
-				};
-
-				rtc@1e8 {
-					compatible = "qcom,pm8058-rtc";
-					reg = <0x1e8>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <39 1>;
-					allow-set-time;
-				};
-
-				vibrator@4a {
-					compatible = "qcom,pm8058-vib";
-					reg = <0x4a>;
-				};
-			};
-		};
-
-		l2cc: clock-controller@2082000 {
-			compatible = "qcom,kpss-gcc", "syscon";
-			reg = <0x02082000 0x1000>;
-		};
-
-		rpm: rpm@104000 {
-			compatible = "qcom,rpm-msm8660";
-			reg = <0x00104000 0x1000>;
-			qcom,ipc = <&l2cc 0x8 2>;
-
-			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ack", "err", "wakeup";
-			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
-			clock-names = "ram";
-
-			rpmcc: clock-controller {
-				compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc";
-				#clock-cells = <1>;
-				clocks = <&pxo_board>;
-				clock-names = "pxo";
-			};
-
-			pm8901-regulators {
-				compatible = "qcom,rpm-pm8901-regulators";
-
-				pm8901_l0: l0 {};
-				pm8901_l1: l1 {};
-				pm8901_l2: l2 {};
-				pm8901_l3: l3 {};
-				pm8901_l4: l4 {};
-				pm8901_l5: l5 {};
-				pm8901_l6: l6 {};
-
-				/* S0 and S1 Handled as SAW regulators by SPM */
-				pm8901_s2: s2 {};
-				pm8901_s3: s3 {};
-				pm8901_s4: s4 {};
-
-				pm8901_lvs0: lvs0 {};
-				pm8901_lvs1: lvs1 {};
-				pm8901_lvs2: lvs2 {};
-				pm8901_lvs3: lvs3 {};
-
-				pm8901_mvs: mvs {};
-			};
-
-			pm8058-regulators {
-				compatible = "qcom,rpm-pm8058-regulators";
-
-				pm8058_l0: l0 {};
-				pm8058_l1: l1 {};
-				pm8058_l2: l2 {};
-				pm8058_l3: l3 {};
-				pm8058_l4: l4 {};
-				pm8058_l5: l5 {};
-				pm8058_l6: l6 {};
-				pm8058_l7: l7 {};
-				pm8058_l8: l8 {};
-				pm8058_l9: l9 {};
-				pm8058_l10: l10 {};
-				pm8058_l11: l11 {};
-				pm8058_l12: l12 {};
-				pm8058_l13: l13 {};
-				pm8058_l14: l14 {};
-				pm8058_l15: l15 {};
-				pm8058_l16: l16 {};
-				pm8058_l17: l17 {};
-				pm8058_l18: l18 {};
-				pm8058_l19: l19 {};
-				pm8058_l20: l20 {};
-				pm8058_l21: l21 {};
-				pm8058_l22: l22 {};
-				pm8058_l23: l23 {};
-				pm8058_l24: l24 {};
-				pm8058_l25: l25 {};
-
-				pm8058_s0: s0 {};
-				pm8058_s1: s1 {};
-				pm8058_s2: s2 {};
-				pm8058_s3: s3 {};
-				pm8058_s4: s4 {};
-
-				pm8058_lvs0: lvs0 {};
-				pm8058_lvs1: lvs1 {};
-
-				pm8058_ncp: ncp {};
-			};
-		};
-
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			sdcc1: mmc@12400000 {
-				status = "disabled";
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg = <0x12400000 0x8000>;
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				max-frequency = <48000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-			};
-
-			sdcc2: mmc@12140000 {
-				status = "disabled";
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg = <0x12140000 0x8000>;
-				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				max-frequency = <48000000>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-			};
-
-			sdcc3: mmc@12180000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x12180000 0x8000>;
-				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <48000000>;
-				no-1-8-v;
-			};
-
-			sdcc4: mmc@121c0000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x121c0000 0x8000>;
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				max-frequency = <48000000>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-			};
-
-			sdcc5: mmc@12200000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x12200000 0x8000>;
-				interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <48000000>;
-			};
-		};
-
-		tcsr: syscon@1a400000 {
-			compatible = "qcom,tcsr-msm8660", "syscon";
-			reg = <0x1a400000 0x100>;
-		};
-	};
-
-};
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
deleted file mode 100644
index d1fd0fe12ffe..000000000000
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ /dev/null
@@ -1,354 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/input/input.h>
-
-#include "qcom-msm8960.dtsi"
-
-/ {
-	model = "Qualcomm MSM8960 CDP";
-	compatible = "qcom,msm8960-cdp", "qcom,msm8960";
-
-	aliases {
-		serial0 = &gsbi5_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		gsbi@16400000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16440000 {
-				status = "okay";
-			};
-		};
-
-		amba {
-			/* eMMC */
-			sdcc1: mmc@12400000 {
-				status = "okay";
-			};
-
-			/* External micro SD card */
-			sdcc3: mmc@12180000 {
-				status = "okay";
-			};
-		};
-
-		rpm@108000 {
-			regulators {
-				compatible = "qcom,rpm-pm8921-regulators";
-				vin_lvs1_3_6-supply = <&pm8921_s4>;
-				vin_lvs2-supply = <&pm8921_s4>;
-				vin_lvs4_5_7-supply = <&pm8921_s4>;
-				vdd_ncp-supply = <&pm8921_l6>;
-				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vdd_l21_l23_l29-supply = <&pm8921_s8>;
-				vdd_l24-supply = <&pm8921_s1>;
-				vdd_l25-supply = <&pm8921_s1>;
-				vdd_l27-supply = <&pm8921_s7>;
-				vdd_l28-supply = <&pm8921_s7>;
-
-				/* Buck SMPS */
-				pm8921_s1: s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				pm8921_s2: s2 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8921_s3: s3 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <4800000>;
-					bias-pull-down;
-				};
-
-				pm8921_s4: s4 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
-				};
-
-				pm8921_s7: s7 {
-					regulator-min-microvolt = <1150000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				pm8921_s8: s8 {
-					regulator-always-on;
-					regulator-min-microvolt = <2050000>;
-					regulator-max-microvolt = <2050000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				/* PMOS LDO */
-				pm8921_l1: l1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8921_l2: l2 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				pm8921_l3: l3 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3075000>;
-					bias-pull-down;
-				};
-
-				pm8921_l4: l4 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8921_l5: l5 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8921_l6: l6 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8921_l7: l7 {
-					regulator-always-on;
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8921_l8: l8 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				pm8921_l9: l9 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				pm8921_l10: l10 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				pm8921_l11: l11 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8921_l12: l12 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				pm8921_l14: l14 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8921_l15: l15 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8921_l16: l16 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					bias-pull-down;
-				};
-
-				pm8921_l17: l17 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8921_l18: l18 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					bias-pull-down;
-				};
-
-				pm8921_l21: l21 {
-					regulator-min-microvolt = <1900000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				pm8921_l22: l22 {
-					regulator-min-microvolt = <2750000>;
-					regulator-max-microvolt = <2750000>;
-					bias-pull-down;
-				};
-
-				pm8921_l23: l23 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8921_l24: l24 {
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-
-				pm8921_l25: l25 {
-					regulator-always-on;
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-					bias-pull-down;
-				};
-
-				/* Low Voltage Switch */
-				pm8921_lvs1: lvs1 {
-					bias-pull-down;
-				};
-
-				pm8921_lvs2: lvs2 {
-					bias-pull-down;
-				};
-
-				pm8921_lvs3: lvs3 {
-					bias-pull-down;
-				};
-
-				pm8921_lvs4: lvs4 {
-					bias-pull-down;
-				};
-
-				pm8921_lvs5: lvs5 {
-					bias-pull-down;
-				};
-
-				pm8921_lvs6: lvs6 {
-					bias-pull-down;
-				};
-
-				pm8921_lvs7: lvs7 {
-					bias-pull-down;
-				};
-
-				pm8921_ncp: ncp {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-				};
-			};
-		};
-
-		gsbi@16000000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_SPI>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_default>;
-			spi@16080000 {
-				status = "okay";
-				ethernet@0 {
-					compatible = "micrel,ks8851";
-					reg = <0>;
-					interrupt-parent = <&msmgpio>;
-					interrupts = <90 8>;
-					spi-max-frequency = <5400000>;
-					vdd-supply = <&ext_l2>;
-					vdd-io-supply = <&pm8921_lvs6>;
-					reset-gpios = <&msmgpio 89 0>;
-				};
-			};
-		};
-
-		pinctrl@800000 {
-			spi1_default: spi1_default {
-				mux {
-					pins = "gpio6", "gpio7", "gpio9";
-					function = "gsbi1";
-				};
-
-				mosi {
-					pins = "gpio6";
-					drive-strength = <12>;
-					bias-disable;
-				};
-
-				miso {
-					pins = "gpio7";
-					drive-strength = <12>;
-					bias-disable;
-				};
-
-				cs {
-					pins = "gpio8";
-					drive-strength = <12>;
-					bias-disable;
-					output-low;
-				};
-
-				clk {
-					pins = "gpio9";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		ext_l2: gpio-regulator@91 {
-			compatible = "regulator-fixed";
-			regulator-name = "ext_l2";
-			gpio = <&msmgpio 91 0>;
-			startup-delay-us = <10000>;
-			enable-active-high;
-		};
-	};
-};
-
-&pmicintc {
-	keypad@148 {
-		linux,keymap = <
-			MATRIX_KEY(0, 0, KEY_VOLUMEUP)
-			MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
-			MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
-			MATRIX_KEY(0, 3, KEY_CAMERA)
-			>;
-		keypad,num-rows = <1>;
-		keypad,num-columns = <5>;
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
deleted file mode 100644
index 19554f3b5196..000000000000
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ /dev/null
@@ -1,335 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-msm8960.h>
-#include <dt-bindings/mfd/qcom-rpm.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Qualcomm MSM8960";
-	compatible = "qcom,msm8960";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <1 14 0x304>;
-
-		cpu@0 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
-		};
-
-		cpu@1 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <1 10 0x304>;
-		qcom,no-pc-write;
-	};
-
-	clocks {
-		cxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-			clock-output-names = "cxo_board";
-		};
-
-		pxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <27000000>;
-			clock-output-names = "pxo_board";
-		};
-
-		sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "sleep_clk";
-		};
-	};
-
-	/* Temporary fixed regulator */
-	vsdcc_fixed: vsdcc-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "SDCC Power";
-		regulator-min-microvolt = <2700000>;
-		regulator-max-microvolt = <2700000>;
-		regulator-always-on;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@2000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x02000000 0x1000>,
-			      <0x02002000 0x1000>;
-		};
-
-		timer@200a000 {
-			compatible = "qcom,kpss-timer",
-				     "qcom,kpss-wdt-msm8960", "qcom,msm-timer";
-			interrupts = <1 1 0x301>,
-				     <1 2 0x301>,
-				     <1 3 0x301>;
-			reg = <0x0200a000 0x100>;
-			clock-frequency = <27000000>,
-					  <32768>;
-			cpu-offset = <0x80000>;
-		};
-
-		msmgpio: pinctrl@800000 {
-			compatible = "qcom,msm8960-pinctrl";
-			gpio-controller;
-			gpio-ranges = <&msmgpio 0 0 152>;
-			#gpio-cells = <2>;
-			interrupts = <0 16 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x800000 0x4000>;
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-msm8960";
-			#clock-cells = <1>;
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0x900000 0x4000>;
-		};
-
-		lcc: clock-controller@28000000 {
-			compatible = "qcom,lcc-msm8960";
-			reg = <0x28000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		clock-controller@4000000 {
-			compatible = "qcom,mmcc-msm8960";
-			reg = <0x4000000 0x1000>;
-			#clock-cells = <1>;
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		l2cc: clock-controller@2011000 {
-			compatible = "qcom,kpss-gcc", "syscon";
-			reg = <0x2011000 0x1000>;
-		};
-
-		rpm@108000 {
-			compatible = "qcom,rpm-msm8960";
-			reg = <0x108000 0x1000>;
-			qcom,ipc = <&l2cc 0x8 2>;
-
-			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ack", "err", "wakeup";
-
-			regulators {
-				compatible = "qcom,rpm-pm8921-regulators";
-			};
-		};
-
-		acc0: clock-controller@2088000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		acc1: clock-controller@2098000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		saw0: regulator@2089000 {
-			compatible = "qcom,saw2";
-			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw1: regulator@2099000 {
-			compatible = "qcom,saw2";
-			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		gsbi5: gsbi@16400000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <5>;
-			reg = <0x16400000 0x100>;
-			clocks = <&gcc GSBI5_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi5_serial: serial@16440000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16440000 0x1000>,
-				      <0x16400000 0x1000>;
-				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		qcom,ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic@0 {
-				compatible = "qcom,pm8921";
-				interrupt-parent = <&msmgpio>;
-				interrupts = <104 8>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pwrkey@1c {
-					compatible = "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 1>, <51 1>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				keypad@148 {
-					compatible = "qcom,pm8921-keypad";
-					reg = <0x148>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <74 1>, <75 1>;
-					debounce = <15>;
-					scan-delay = <32>;
-					row-hold = <91500>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 1>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-			};
-		};
-
-		rng@1a500000 {
-			compatible = "qcom,prng";
-			reg = <0x1a500000 0x200>;
-			clocks = <&gcc PRNG_CLK>;
-			clock-names = "core";
-		};
-
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			sdcc1: mmc@12400000 {
-				status = "disabled";
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg = <0x12400000 0x8000>;
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				max-frequency = <96000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				vmmc-supply = <&vsdcc_fixed>;
-			};
-
-			sdcc3: mmc@12180000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x12180000 0x8000>;
-				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <192000000>;
-				no-1-8-v;
-				vmmc-supply = <&vsdcc_fixed>;
-			};
-		};
-
-		tcsr: syscon@1a400000 {
-			compatible = "qcom,tcsr-msm8960", "syscon";
-			reg = <0x1a400000 0x100>;
-		};
-
-		gsbi@16000000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <1>;
-			reg = <0x16000000 0x100>;
-			clocks = <&gcc GSBI1_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			spi@16080000 {
-				compatible = "qcom,spi-qup-v1.1.1";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x16080000 0x1000>;
-				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-				spi-max-frequency = <24000000>;
-				cs-gpios = <&msmgpio 8 0>;
-
-				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts
deleted file mode 100644
index 68d5626bf491..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974-sony-xperia-rhine.dtsi"
-
-/ {
-	model = "Sony Xperia Z1 Compact";
-	compatible = "sony,xperia-amami", "qcom,msm8974";
-};
-
-&smbb {
-	qcom,fast-charge-safe-current = <1300000>;
-	qcom,fast-charge-current-limit = <1300000>;
-	qcom,dc-current-limit = <1300000>;
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts
deleted file mode 100644
index ea6a941d8f8c..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts
+++ /dev/null
@@ -1,7 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974-sony-xperia-rhine.dtsi"
-
-/ {
-	model = "Sony Xperia Z1";
-	compatible = "sony,xperia-honami", "qcom,msm8974";
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
deleted file mode 100644
index 8baca2a77717..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ /dev/null
@@ -1,1931 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/interconnect/qcom,msm8974.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-msm8974.h>
-#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
-#include <dt-bindings/reset/qcom,gcc-msm8974.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	clocks {
-		xo_board: xo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-		};
-
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_PPI 9 0xf04>;
-
-		CPU0: cpu@0 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v2";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		CPU1: cpu@1 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v2";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		CPU2: cpu@2 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v2";
-			device_type = "cpu";
-			reg = <2>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc2>;
-			qcom,saw = <&saw2>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		CPU3: cpu@3 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v2";
-			device_type = "cpu";
-			reg = <3>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc3>;
-			qcom,saw = <&saw3>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-			qcom,saw = <&saw_l2>;
-		};
-
-		idle-states {
-			CPU_SPC: spc {
-				compatible = "qcom,idle-state-spc",
-						"arm,idle-state";
-				entry-latency-us = <150>;
-				exit-latency-us = <200>;
-				min-residency-us = <2000>;
-			};
-		};
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-msm8974", "qcom,scm";
-			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
-			clock-names = "core", "bus", "iface";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <GIC_PPI 7 0xf04>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mpss_region: mpss@8000000 {
-			reg = <0x08000000 0x5100000>;
-			no-map;
-		};
-
-		mba_region: mba@d100000 {
-			reg = <0x0d100000 0x100000>;
-			no-map;
-		};
-
-		wcnss_region: wcnss@d200000 {
-			reg = <0x0d200000 0xa00000>;
-			no-map;
-		};
-
-		adsp_region: adsp@dc00000 {
-			reg = <0x0dc00000 0x1900000>;
-			no-map;
-		};
-
-		venus_region: memory@f500000 {
-			reg = <0x0f500000 0x500000>;
-			no-map;
-		};
-
-		smem_region: smem@fa00000 {
-			reg = <0xfa00000 0x200000>;
-			no-map;
-		};
-
-		tz_region: memory@fc00000 {
-			reg = <0x0fc00000 0x160000>;
-			no-map;
-		};
-
-		rfsa_mem: memory@fd60000 {
-			reg = <0x0fd60000 0x20000>;
-			no-map;
-		};
-
-		rmtfs@fd80000 {
-			compatible = "qcom,rmtfs-mem";
-			reg = <0x0fd80000 0x180000>;
-			no-map;
-
-			qcom,client-id = <1>;
-		};
-	};
-
-	smem {
-		compatible = "qcom,smem";
-
-		memory-region = <&smem_region>;
-		qcom,rpm-msg-ram = <&rpm_msg_ram>;
-
-		hwlocks = <&tcsr_mutex 3>;
-	};
-
-	smp2p-adsp {
-		compatible = "qcom,smp2p";
-		qcom,smem = <443>, <429>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
-
-		qcom,ipc = <&apcs 8 10>;
-
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <2>;
-
-		adsp_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		adsp_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	smp2p-modem {
-		compatible = "qcom,smp2p";
-		qcom,smem = <435>, <428>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
-
-		qcom,ipc = <&apcs 8 14>;
-
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <1>;
-
-		modem_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		modem_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	smp2p-wcnss {
-		compatible = "qcom,smp2p";
-		qcom,smem = <451>, <431>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
-
-		qcom,ipc = <&apcs 8 18>;
-
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <4>;
-
-		wcnss_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-
-			#qcom,smem-state-cells = <1>;
-		};
-
-		wcnss_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	smsm {
-		compatible = "qcom,smsm";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		qcom,ipc-1 = <&apcs 8 13>;
-		qcom,ipc-2 = <&apcs 8 9>;
-		qcom,ipc-3 = <&apcs 8 19>;
-
-		apps_smsm: apps@0 {
-			reg = <0>;
-
-			#qcom,smem-state-cells = <1>;
-		};
-
-		modem_smsm: modem@1 {
-			reg = <1>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		adsp_smsm: adsp@2 {
-			reg = <2>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		wcnss_smsm: wcnss@7 {
-			reg = <7>;
-			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests: rpm_requests {
-				compatible = "qcom,rpm-msm8974";
-				qcom,smd-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
-					#clock-cells = <1>;
-				};
-			};
-		};
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@f9000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0xf9000000 0x1000>,
-			      <0xf9002000 0x1000>;
-		};
-
-		apcs: syscon@f9011000 {
-			compatible = "syscon";
-			reg = <0xf9011000 0x1000>;
-		};
-
-		timer@f9020000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0xf9020000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame@f9021000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9021000 0x1000>,
-				      <0xf9022000 0x1000>;
-			};
-
-			frame@f9023000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9023000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9024000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9024000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9025000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9025000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9026000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9026000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9027000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9027000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9028000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9028000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		saw0: power-controller@f9089000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw1: power-controller@f9099000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw2: power-controller@f90a9000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw3: power-controller@f90b9000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw_l2: power-controller@f9012000 {
-			compatible = "qcom,saw2";
-			reg = <0xf9012000 0x1000>;
-			regulator;
-		};
-
-		acc0: clock-controller@f9088000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
-		};
-
-		acc1: clock-controller@f9098000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
-		};
-
-		acc2: clock-controller@f90a8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
-		};
-
-		acc3: clock-controller@f90b8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
-		};
-
-		sdhc_1: mmc@f9824900 {
-			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_SDCC1_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
-			bus-width = <8>;
-			non-removable;
-
-			status = "disabled";
-		};
-
-		sdhc_3: mmc@f9864900 {
-			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC3_APPS_CLK>,
-				 <&gcc GCC_SDCC3_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
-			bus-width = <4>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			status = "disabled";
-		};
-
-		sdhc_2: mmc@f98a4900 {
-			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&gcc GCC_SDCC2_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
-			bus-width = <4>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			status = "disabled";
-		};
-
-		blsp1_uart1: serial@f991d000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf991d000 0x1000>;
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		blsp1_uart2: serial@f991e000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf991e000 0x1000>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_uart2_default>;
-			status = "disabled";
-		};
-
-		blsp1_i2c1: i2c@f9923000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9923000 0x1000>;
-			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_i2c1_default>;
-			pinctrl-1 = <&blsp1_i2c1_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp1_i2c2: i2c@f9924000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9924000 0x1000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_i2c2_default>;
-			pinctrl-1 = <&blsp1_i2c2_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp1_i2c3: i2c@f9925000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9925000 0x1000>;
-			interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_i2c3_default>;
-			pinctrl-1 = <&blsp1_i2c3_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp1_i2c6: i2c@f9928000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9928000 0x1000>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_i2c6_default>;
-			pinctrl-1 = <&blsp1_i2c6_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp2_dma: dma-controller@f9944000 {
-			compatible = "qcom,bam-v1.4.0";
-			reg = <0xf9944000 0x19000>;
-			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		blsp2_uart1: serial@f995d000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf995d000 0x1000>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_uart1_default>;
-			pinctrl-1 = <&blsp2_uart1_sleep>;
-			status = "disabled";
-		};
-
-		blsp2_uart2: serial@f995e000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf995e000 0x1000>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		blsp2_uart4: serial@f9960000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf9960000 0x1000>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp2_uart4_default>;
-			status = "disabled";
-		};
-
-		blsp2_i2c2: i2c@f9964000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9964000 0x1000>;
-			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_i2c2_default>;
-			pinctrl-1 = <&blsp2_i2c2_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp2_i2c5: i2c@f9967000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9967000 0x1000>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_i2c5_default>;
-			pinctrl-1 = <&blsp2_i2c5_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp2_i2c6: i2c@f9968000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9968000 0x1000>;
-			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_i2c6_default>;
-			pinctrl-1 = <&blsp2_i2c6_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		otg: usb@f9a55000 {
-			compatible = "qcom,ci-hdrc";
-			reg = <0xf9a55000 0x200>,
-			      <0xf9a55200 0x200>;
-			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
-				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
-			clock-names = "iface", "core";
-			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
-			assigned-clock-rates = <75000000>;
-			resets = <&gcc GCC_USB_HS_BCR>;
-			reset-names = "core";
-			phy_type = "ulpi";
-			dr_mode = "otg";
-			ahb-burst-config = <0>;
-			phy-names = "usb-phy";
-			status = "disabled";
-			#reset-cells = <1>;
-
-			ulpi {
-				usb_hs1_phy: phy@a {
-					compatible = "qcom,usb-hs-phy-msm8974",
-						     "qcom,usb-hs-phy";
-					#phy-cells = <0>;
-					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
-					clock-names = "ref", "sleep";
-					resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
-					reset-names = "phy", "por";
-					status = "disabled";
-				};
-
-				usb_hs2_phy: phy@b {
-					compatible = "qcom,usb-hs-phy-msm8974",
-						     "qcom,usb-hs-phy";
-					#phy-cells = <0>;
-					clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
-					clock-names = "ref", "sleep";
-					resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>;
-					reset-names = "phy", "por";
-					status = "disabled";
-				};
-			};
-		};
-
-		rng@f9bff000 {
-			compatible = "qcom,prng";
-			reg = <0xf9bff000 0x200>;
-			clocks = <&gcc GCC_PRNG_AHB_CLK>;
-			clock-names = "core";
-		};
-
-		pronto: remoteproc@fb21b000 {
-			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
-			reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
-			reg-names = "ccu", "dxe", "pmu";
-
-			memory-region = <&wcnss_region>;
-
-			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
-			qcom,smem-states = <&wcnss_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			iris {
-				compatible = "qcom,wcn3680";
-
-				clocks = <&rpmcc RPM_SMD_CXO_A2>;
-				clock-names = "xo";
-			};
-
-			smd-edge {
-				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
-
-				qcom,ipc = <&apcs 8 17>;
-				qcom,smd-edge = <6>;
-
-				wcnss {
-					compatible = "qcom,wcnss";
-					qcom,smd-channels = "WCNSS_CTRL";
-					status = "disabled";
-
-					qcom,mmio = <&pronto>;
-
-					bt {
-						compatible = "qcom,wcnss-bt";
-					};
-
-					wifi {
-						compatible = "qcom,wcnss-wlan";
-
-						interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
-							     <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
-						interrupt-names = "tx", "rx";
-
-						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
-						qcom,smem-state-names = "tx-enable",
-									"tx-rings-empty";
-					};
-				};
-			};
-		};
-
-		etf@fc307000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0xfc307000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			out-ports {
-				port {
-					etf_out: endpoint {
-						remote-endpoint = <&replicator_in>;
-					};
-				};
-			};
-
-			in-ports {
-				port {
-					etf_in: endpoint {
-						remote-endpoint = <&merger_out>;
-					};
-				};
-			};
-		};
-
-		tpiu@fc318000 {
-			compatible = "arm,coresight-tpiu", "arm,primecell";
-			reg = <0xfc318000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				port {
-					tpiu_in: endpoint {
-						remote-endpoint = <&replicator_out1>;
-					};
-				 };
-			};
-		};
-
-		funnel@fc31a000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0xfc31a000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/*
-				 * Not described input ports:
-				 * 0 - not-connected
-				 * 1 - connected trought funnel to Multimedia CPU
-				 * 2 - connected to Wireless CPU
-				 * 3 - not-connected
-				 * 4 - not-connected
-				 * 6 - not-connected
-				 * 7 - connected to STM
-				 */
-				port@5 {
-					reg = <5>;
-					funnel1_in5: endpoint {
-						remote-endpoint = <&kpss_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					funnel1_out: endpoint {
-						remote-endpoint = <&merger_in1>;
-					};
-				};
-			};
-		};
-
-		funnel@fc31b000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0xfc31b000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/*
-				 * Not described input ports:
-				 * 0 - connected trought funnel to Audio, Modem and
-				 *     Resource and Power Manager CPU's
-				 * 2...7 - not-connected
-				 */
-				port@1 {
-					reg = <1>;
-					merger_in1: endpoint {
-						remote-endpoint = <&funnel1_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					merger_out: endpoint {
-						remote-endpoint = <&etf_in>;
-					};
-				};
-			};
-		};
-
-		replicator@fc31c000 {
-			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
-			reg = <0xfc31c000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					replicator_out0: endpoint {
-						remote-endpoint = <&etr_in>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					replicator_out1: endpoint {
-						remote-endpoint = <&tpiu_in>;
-					};
-				};
-			};
-
-			in-ports {
-				port {
-					replicator_in: endpoint {
-						remote-endpoint = <&etf_out>;
-					};
-				};
-			};
-		};
-
-		etr@fc322000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0xfc322000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				port {
-					etr_in: endpoint {
-						remote-endpoint = <&replicator_out0>;
-					};
-				};
-			};
-		};
-
-		etm@fc33c000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0xfc33c000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			cpu = <&CPU0>;
-
-			out-ports {
-				port {
-					etm0_out: endpoint {
-						remote-endpoint = <&kpss_in0>;
-					};
-				};
-			};
-		};
-
-		etm@fc33d000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0xfc33d000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			cpu = <&CPU1>;
-
-			out-ports {
-				port {
-					etm1_out: endpoint {
-						remote-endpoint = <&kpss_in1>;
-					};
-				};
-			};
-		};
-
-		etm@fc33e000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0xfc33e000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			cpu = <&CPU2>;
-
-			out-ports {
-				port {
-					etm2_out: endpoint {
-						remote-endpoint = <&kpss_in2>;
-					};
-				};
-			};
-		};
-
-		etm@fc33f000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0xfc33f000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			cpu = <&CPU3>;
-
-			out-ports {
-				port {
-					etm3_out: endpoint {
-						remote-endpoint = <&kpss_in3>;
-					};
-				};
-			};
-		};
-
-		/* KPSS funnel, only 4 inputs are used */
-		funnel@fc345000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0xfc345000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					kpss_in0: endpoint {
-						remote-endpoint = <&etm0_out>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					kpss_in1: endpoint {
-						remote-endpoint = <&etm1_out>;
-					};
-				};
-				port@2 {
-					reg = <2>;
-					kpss_in2: endpoint {
-						remote-endpoint = <&etm2_out>;
-					};
-				};
-				port@3 {
-					reg = <3>;
-					kpss_in3: endpoint {
-						remote-endpoint = <&etm3_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					kpss_out: endpoint {
-						remote-endpoint = <&funnel1_in5>;
-					};
-				};
-			};
-		};
-
-		gcc: clock-controller@fc400000 {
-			compatible = "qcom,gcc-msm8974";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0xfc400000 0x4000>;
-		};
-
-		rpm_msg_ram: memory@fc428000 {
-			compatible = "qcom,rpm-msg-ram";
-			reg = <0xfc428000 0x4000>;
-		};
-
-		bimc: interconnect@fc380000 {
-			reg = <0xfc380000 0x6a000>;
-			compatible = "qcom,msm8974-bimc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-			         <&rpmcc RPM_SMD_BIMC_A_CLK>;
-		};
-
-		snoc: interconnect@fc460000 {
-			reg = <0xfc460000 0x4000>;
-			compatible = "qcom,msm8974-snoc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-			         <&rpmcc RPM_SMD_SNOC_A_CLK>;
-		};
-
-		pnoc: interconnect@fc468000 {
-			reg = <0xfc468000 0x4000>;
-			compatible = "qcom,msm8974-pnoc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
-			         <&rpmcc RPM_SMD_PNOC_A_CLK>;
-		};
-
-		ocmemnoc: interconnect@fc470000 {
-			reg = <0xfc470000 0x4000>;
-			compatible = "qcom,msm8974-ocmemnoc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
-			         <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
-		};
-
-		mmssnoc: interconnect@fc478000 {
-			reg = <0xfc478000 0x4000>;
-			compatible = "qcom,msm8974-mmssnoc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&mmcc MMSS_S0_AXI_CLK>,
-			         <&mmcc MMSS_S0_AXI_CLK>;
-		};
-
-		cnoc: interconnect@fc480000 {
-			reg = <0xfc480000 0x4000>;
-			compatible = "qcom,msm8974-cnoc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-			         <&rpmcc RPM_SMD_CNOC_A_CLK>;
-		};
-
-		tsens: thermal-sensor@fc4a9000 {
-			compatible = "qcom,msm8974-tsens";
-			reg = <0xfc4a9000 0x1000>, /* TM */
-			      <0xfc4a8000 0x1000>; /* SROT */
-			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-			nvmem-cell-names = "calib", "calib_backup";
-			#qcom,sensors = <11>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
-			#thermal-sensor-cells = <1>;
-		};
-
-		restart@fc4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0xfc4ab000 0x4>;
-		};
-
-		qfprom: qfprom@fc4bc000 {
-			compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
-			reg = <0xfc4bc000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			tsens_calib: calib@d0 {
-				reg = <0xd0 0x18>;
-			};
-			tsens_backup: backup@440 {
-				reg = <0x440 0x10>;
-			};
-		};
-
-		spmi_bus: spmi@fc4cf000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg-names = "core", "intr", "cnfg";
-			reg = <0xfc4cf000 0x1000>,
-			      <0xfc4cb000 0x1000>,
-			      <0xfc4ca000 0x1000>;
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
-
-		bam_dmux_dma: dma-controller@fc834000 {
-			compatible = "qcom,bam-v1.4.0";
-			reg = <0xfc834000 0x7000>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-
-			num-channels = <6>;
-			qcom,num-ees = <1>;
-			qcom,powered-remotely;
-		};
-
-		remoteproc_mss: remoteproc@fc880000 {
-			compatible = "qcom,msm8974-mss-pil";
-			reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
-			reg-names = "qdsp6", "rmb";
-
-			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
-			clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
-				 <&gcc GCC_MSS_CFG_AHB_CLK>,
-				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "iface", "bus", "mem", "xo";
-
-			resets = <&gcc GCC_MSS_RESTART>;
-			reset-names = "mss_restart";
-
-			qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
-
-			qcom,smem-states = <&modem_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			mba {
-				memory-region = <&mba_region>;
-			};
-
-			mpss {
-				memory-region = <&mpss_region>;
-			};
-
-			bam_dmux: bam-dmux {
-				compatible = "qcom,bam-dmux";
-
-				interrupt-parent = <&modem_smsm>;
-				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
-				interrupt-names = "pc", "pc-ack";
-
-				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
-				qcom,smem-state-names = "pc", "pc-ack";
-
-				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
-				dma-names = "tx", "rx";
-			};
-
-			smd-edge {
-				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
-
-				qcom,ipc = <&apcs 8 12>;
-				qcom,smd-edge = <0>;
-
-				label = "modem";
-			};
-		};
-
-		tcsr_mutex_block: syscon@fd484000 {
-			compatible = "syscon";
-			reg = <0xfd484000 0x2000>;
-		};
-
-		tcsr: syscon@fd4a0000 {
-			compatible = "syscon";
-			reg = <0xfd4a0000 0x10000>;
-		};
-
-		tlmm: pinctrl@fd510000 {
-			compatible = "qcom,msm8974-pinctrl";
-			reg = <0xfd510000 0x4000>;
-			gpio-controller;
-			gpio-ranges = <&tlmm 0 0 146>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-
-			sdc1_off: sdc1-off {
-				clk {
-					pins = "sdc1_clk";
-					bias-disable;
-					drive-strength = <2>;
-				};
-
-				cmd {
-					pins = "sdc1_cmd";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				data {
-					pins = "sdc1_data";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-			};
-
-			sdc2_off: sdc2-off {
-				clk {
-					pins = "sdc2_clk";
-					bias-disable;
-					drive-strength = <2>;
-				};
-
-				cmd {
-					pins = "sdc2_cmd";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				data {
-					pins = "sdc2_data";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				cd {
-					pins = "gpio54";
-					bias-disable;
-					drive-strength = <2>;
-				};
-			};
-
-			blsp1_uart2_default: blsp1-uart2-default {
-				rx {
-					pins = "gpio5";
-					function = "blsp_uart2";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-
-				tx {
-					pins = "gpio4";
-					function = "blsp_uart2";
-					drive-strength = <4>;
-					bias-disable;
-				};
-			};
-
-			blsp2_uart1_default: blsp2-uart1-default {
-				tx-rts {
-					pins = "gpio41", "gpio44";
-					function = "blsp_uart7";
-					drive-strength = <2>;
-					bias-disable;
-				};
-
-				rx-cts {
-					pins = "gpio42", "gpio43";
-					function = "blsp_uart7";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			blsp2_uart1_sleep: blsp2-uart1-sleep {
-				pins = "gpio41", "gpio42", "gpio43", "gpio44";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			blsp2_uart4_default: blsp2-uart4-default {
-				tx-rts {
-					pins = "gpio53", "gpio56";
-					function = "blsp_uart10";
-					drive-strength = <2>;
-					bias-disable;
-				};
-
-				rx-cts {
-					pins = "gpio54", "gpio55";
-					function = "blsp_uart10";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			blsp1_i2c1_default: blsp1-i2c1-default {
-				pins = "gpio2", "gpio3";
-				function = "blsp_i2c1";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c1_sleep: blsp1-i2c1-sleep {
-				pins = "gpio2", "gpio3";
-				function = "blsp_i2c1";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			blsp1_i2c2_default: blsp1-i2c2-default {
-				pins = "gpio6", "gpio7";
-				function = "blsp_i2c2";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c2_sleep: blsp1-i2c2-sleep {
-				pins = "gpio6", "gpio7";
-				function = "blsp_i2c2";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			blsp1_i2c3_default: blsp1-i2c3-default {
-				pins = "gpio10", "gpio11";
-				function = "blsp_i2c3";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c3_sleep: blsp1-i2c3-sleep {
-				pins = "gpio10", "gpio11";
-				function = "blsp_i2c3";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			/* BLSP1_I2C4 info is missing */
-
-			/* BLSP1_I2C5 info is missing */
-
-			blsp1_i2c6_default: blsp1-i2c6-default {
-				pins = "gpio29", "gpio30";
-				function = "blsp_i2c6";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c6_sleep: blsp1-i2c6-sleep {
-				pins = "gpio29", "gpio30";
-				function = "blsp_i2c6";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-			/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
-
-			/* BLSP2_I2C1 info is missing */
-
-			blsp2_i2c2_default: blsp2-i2c2-default {
-				pins = "gpio47", "gpio48";
-				function = "blsp_i2c8";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp2_i2c2_sleep: blsp2-i2c2-sleep {
-				pins = "gpio47", "gpio48";
-				function = "blsp_i2c8";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			/* BLSP2_I2C3 info is missing */
-
-			/* BLSP2_I2C4 info is missing */
-
-			blsp2_i2c5_default: blsp2-i2c5-default {
-				pins = "gpio83", "gpio84";
-				function = "blsp_i2c11";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp2_i2c5_sleep: blsp2-i2c5-sleep {
-				pins = "gpio83", "gpio84";
-				function = "blsp_i2c11";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			blsp2_i2c6_default: blsp2-i2c6-default {
-				pins = "gpio87", "gpio88";
-				function = "blsp_i2c12";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp2_i2c6_sleep: blsp2-i2c6-sleep {
-				pins = "gpio87", "gpio88";
-				function = "blsp_i2c12";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			spi8_default: spi8_default {
-				mosi {
-					pins = "gpio45";
-					function = "blsp_spi8";
-				};
-				miso {
-					pins = "gpio46";
-					function = "blsp_spi8";
-				};
-				cs {
-					pins = "gpio47";
-					function = "blsp_spi8";
-				};
-				clk {
-					pins = "gpio48";
-					function = "blsp_spi8";
-				};
-			};
-		};
-
-		mmcc: clock-controller@fd8c0000 {
-			compatible = "qcom,mmcc-msm8974";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0xfd8c0000 0x6000>;
-		};
-
-		mdss: mdss@fd900000 {
-			compatible = "qcom,mdss";
-			reg = <0xfd900000 0x100>, <0xfd924000 0x1000>;
-			reg-names = "mdss_phys", "vbif_phys";
-
-			power-domains = <&mmcc MDSS_GDSC>;
-
-			clocks = <&mmcc MDSS_AHB_CLK>,
-				 <&mmcc MDSS_AXI_CLK>,
-				 <&mmcc MDSS_VSYNC_CLK>;
-			clock-names = "iface", "bus", "vsync";
-
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			status = "disabled";
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			mdp: mdp@fd900000 {
-				compatible = "qcom,mdp5";
-				reg = <0xfd900100 0x22000>;
-				reg-names = "mdp_phys";
-
-				interrupt-parent = <&mdss>;
-				interrupts = <0>;
-
-				clocks = <&mmcc MDSS_AHB_CLK>,
-					 <&mmcc MDSS_AXI_CLK>,
-					 <&mmcc MDSS_MDP_CLK>,
-					 <&mmcc MDSS_VSYNC_CLK>;
-				clock-names = "iface", "bus", "core", "vsync";
-
-				interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
-				interconnect-names = "mdp0-mem";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-						mdp5_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
-						};
-					};
-				};
-			};
-
-			dsi0: dsi@fd922800 {
-				compatible = "qcom,mdss-dsi-ctrl";
-				reg = <0xfd922800 0x1f8>;
-				reg-names = "dsi_ctrl";
-
-				interrupt-parent = <&mdss>;
-				interrupts = <4>;
-
-				assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
-
-				clocks = <&mmcc MDSS_MDP_CLK>,
-					 <&mmcc MDSS_AHB_CLK>,
-					 <&mmcc MDSS_AXI_CLK>,
-					 <&mmcc MDSS_BYTE0_CLK>,
-					 <&mmcc MDSS_PCLK0_CLK>,
-					 <&mmcc MDSS_ESC0_CLK>,
-					 <&mmcc MMSS_MISC_AHB_CLK>;
-				clock-names = "mdp_core",
-					      "iface",
-					      "bus",
-					      "byte",
-					      "pixel",
-					      "core",
-					      "core_mmss";
-
-				phys = <&dsi0_phy>;
-				phy-names = "dsi-phy";
-
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-						dsi0_in: endpoint {
-							remote-endpoint = <&mdp5_intf1_out>;
-						};
-					};
-
-					port@1 {
-						reg = <1>;
-						dsi0_out: endpoint {
-						};
-					};
-				};
-			};
-
-			dsi0_phy: dsi-phy@fd922a00 {
-				compatible = "qcom,dsi-phy-28nm-hpm";
-				reg = <0xfd922a00 0xd4>,
-				      <0xfd922b00 0x280>,
-				      <0xfd922d80 0x30>;
-				reg-names = "dsi_pll",
-					    "dsi_phy",
-					    "dsi_phy_regulator";
-
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-
-				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
-				clock-names = "iface", "ref";
-
-				status = "disabled";
-			};
-		};
-
-		gpu: adreno@fdb00000 {
-			compatible = "qcom,adreno-330.1", "qcom,adreno";
-			reg = <0xfdb00000 0x10000>;
-			reg-names = "kgsl_3d0_reg_memory";
-
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "kgsl_3d0_irq";
-
-			clocks = <&mmcc OXILI_GFX3D_CLK>,
-				 <&mmcc OXILICX_AHB_CLK>,
-				 <&mmcc OXILICX_AXI_CLK>;
-			clock-names = "core", "iface", "mem_iface";
-
-			sram = <&gmu_sram>;
-			power-domains = <&mmcc OXILICX_GDSC>;
-			operating-points-v2 = <&gpu_opp_table>;
-
-			interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
-					<&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
-			interconnect-names = "gfx-mem", "ocmem";
-
-			// iommus = <&gpu_iommu 0>;
-
-			status = "disabled";
-
-			gpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				opp-320000000 {
-					opp-hz = /bits/ 64 <320000000>;
-				};
-
-				opp-200000000 {
-					opp-hz = /bits/ 64 <200000000>;
-				};
-
-				opp-27000000 {
-					opp-hz = /bits/ 64 <27000000>;
-				};
-			};
-		};
-
-		sram@fdd00000 {
-			compatible = "qcom,msm8974-ocmem";
-			reg = <0xfdd00000 0x2000>,
-			      <0xfec00000 0x180000>;
-			reg-names = "ctrl", "mem";
-			ranges = <0 0xfec00000 0x180000>;
-			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
-				 <&mmcc OCMEMCX_OCMEMNOC_CLK>;
-			clock-names = "core", "iface";
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			gmu_sram: gmu-sram@0 {
-				reg = <0x0 0x100000>;
-			};
-		};
-
-		remoteproc_adsp: remoteproc@fe200000 {
-			compatible = "qcom,msm8974-adsp-pil";
-			reg = <0xfe200000 0x100>;
-
-			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
-					       <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					       <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					       <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					       <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
-			clocks = <&xo_board>;
-			clock-names = "xo";
-
-			memory-region = <&adsp_region>;
-
-			qcom,smem-states = <&adsp_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			smd-edge {
-				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
-				qcom,ipc = <&apcs 8 8>;
-				qcom,smd-edge = <1>;
-				label = "lpass";
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		imem: sram@fe805000 {
-			compatible = "qcom,msm8974-imem", "syscon", "simple-mfd";
-			reg = <0xfe805000 0x1000>;
-
-			reboot-mode {
-				compatible = "syscon-reboot-mode";
-				offset = <0x65c>;
-			};
-		};
-	};
-
-	tcsr_mutex: tcsr-mutex {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_block 0 0x80>;
-
-		#hwlock-cells = <1>;
-	};
-
-	thermal-zones {
-		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 5>;
-
-			trips {
-				cpu_alert0: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit0: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 6>;
-
-			trips {
-				cpu_alert1: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit1: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 7>;
-
-			trips {
-				cpu_alert2: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit2: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 8>;
-
-			trips {
-				cpu_alert3: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit3: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		q6-dsp-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 1>;
-
-			trips {
-				q6_dsp_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		modemtx-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 2>;
-
-			trips {
-				modemtx_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		video-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 3>;
-
-			trips {
-				video_alert0: trip-point0 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		wlan-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 4>;
-
-			trips {
-				wlan_alert0: trip-point0 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		gpu-top-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 9>;
-
-			trips {
-				gpu1_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		gpu-bottom-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 10>;
-
-			trips {
-				gpu2_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 2 0xf08>,
-			     <GIC_PPI 3 0xf08>,
-			     <GIC_PPI 4 0xf08>,
-			     <GIC_PPI 1 0xf08>;
-		clock-frequency = <19200000>;
-	};
-
-	vreg_boost: vreg-boost {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vreg-boost";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&boost_bypass_n_pin>;
-	};
-
-	vreg_vph_pwr: vreg-vph-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "vph-pwr";
-
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-
-		regulator-always-on;
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
deleted file mode 100644
index 983e10c3d863..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
+++ /dev/null
@@ -1,815 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974pro.dtsi"
-#include "qcom-pma8084.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "Samsung Galaxy S5";
-	compatible = "samsung,klte", "qcom,msm8974";
-
-	aliases {
-		serial0 = &blsp1_uart1;
-		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
-		mmc1 = &sdhc_3; /* SDC2 SD card slot */
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		key-volume-down {
-			label = "volume_down";
-			gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <15>;
-		};
-
-		key-home {
-			label = "home_key";
-			gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_HOMEPAGE>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-
-		key-volume-up {
-			label = "volume_up";
-			gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <15>;
-		};
-	};
-
-	i2c-gpio-touchkey {
-		compatible = "i2c-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c_touchkey_pins>;
-
-		touchkey@20 {
-			compatible = "cypress,tm2-touchkey";
-			reg = <0x20>;
-
-			interrupt-parent = <&pma8084_gpios>;
-			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&touchkey_pin>;
-
-			vcc-supply = <&max77826_ldo15>;
-			vdd-supply = <&pma8084_l19>;
-
-			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
-		};
-	};
-
-	i2c-gpio-led {
-		compatible = "i2c-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c_led_gpioex_pins>;
-
-		i2c-gpio,delay-us = <2>;
-
-		gpio_expander: gpio@20 {
-			compatible = "nxp,pcal6416";
-			reg = <0x20>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			vcc-supply = <&pma8084_s4>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpioex_pin>;
-
-			reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
-		};
-
-		led-controller@30 {
-			compatible = "panasonic,an30259a";
-			reg = <0x30>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			led@1 {
-				reg = <1>;
-				function = LED_FUNCTION_STATUS;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@2 {
-				reg = <2>;
-				function = LED_FUNCTION_STATUS;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@3 {
-				reg = <3>;
-				function = LED_FUNCTION_STATUS;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-		};
-	};
-
-	vreg_wlan: wlan-regulator {
-		compatible = "regulator-fixed";
-
-		regulator-name = "wl-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vreg_panel: panel-regulator {
-		compatible = "regulator-fixed";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_en_pin>;
-
-		regulator-name = "panel-vddr-reg";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-
-		gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	/delete-node/ vreg-boost;
-};
-
-&blsp1_i2c2 {
-	status = "okay";
-
-	touchscreen@20 {
-		compatible = "syna,rmi4-i2c";
-		reg = <0x20>;
-
-		interrupt-parent = <&pma8084_gpios>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		vdd-supply = <&max77826_ldo13>;
-		vio-supply = <&pma8084_lvs2>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&touch_pin>;
-
-		syna,startup-delay-ms = <100>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rmi4-f01@1 {
-			reg = <0x1>;
-			syna,nosleep-mode = <1>;
-		};
-
-		rmi4-f12@12 {
-			reg = <0x12>;
-			syna,sensor-type = <1>;
-		};
-	};
-};
-
-&blsp1_i2c6 {
-	status = "okay";
-
-	pmic@60 {
-		reg = <0x60>;
-		compatible = "maxim,max77826";
-
-		regulators {
-			max77826_ldo1: LDO1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			max77826_ldo2: LDO2 {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			max77826_ldo3: LDO3 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			max77826_ldo4: LDO4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_ldo5: LDO5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_ldo6: LDO6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo7: LDO7 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_ldo8: LDO8 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo9: LDO9 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_ldo10: LDO10 {
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2950000>;
-			};
-
-			max77826_ldo11: LDO11 {
-				regulator-min-microvolt = <2700000>;
-				regulator-max-microvolt = <2950000>;
-			};
-
-			max77826_ldo12: LDO12 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo13: LDO13 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo14: LDO14 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo15: LDO15 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_buck: BUCK {
-				regulator-min-microvolt = <1225000>;
-				regulator-max-microvolt = <1225000>;
-			};
-
-			max77826_buckboost: BUCKBOOST {
-				regulator-min-microvolt = <3400000>;
-				regulator-max-microvolt = <3400000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart2 {
-	status = "okay";
-};
-
-&blsp2_i2c6 {
-	status = "okay";
-
-	fuelgauge@36 {
-		compatible = "maxim,max17048";
-		reg = <0x36>;
-
-		maxim,double-soc;
-		maxim,rcomp = /bits/ 8 <0x56>;
-
-		interrupt-parent = <&pma8084_gpios>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&fuelgauge_pin>;
-	};
-};
-
-&blsp2_uart2 {
-	status = "okay";
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&blsp2_uart2_pins_active>;
-	pinctrl-1 = <&blsp2_uart2_pins_sleep>;
-
-	bluetooth {
-		compatible = "brcm,bcm43540-bt";
-		max-speed = <3000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_pins>;
-		device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wakeup";
-	};
-};
-
-&dsi0 {
-	status = "okay";
-
-	vdda-supply = <&pma8084_l2>;
-	vdd-supply = <&pma8084_l22>;
-	vddio-supply = <&pma8084_l12>;
-
-	panel: panel@0 {
-		reg = <0>;
-		compatible = "samsung,s6e3fa2";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
-
-		iovdd-supply = <&pma8084_lvs4>;
-		vddr-supply = <&vreg_panel>;
-
-		reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
-		te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
-			};
-		};
-	};
-};
-
-&dsi0_out {
-	remote-endpoint = <&panel_in>;
-	data-lanes = <0 1 2 3>;
-};
-
-&dsi0_phy {
-	status = "okay";
-
-	vddio-supply = <&pma8084_l12>;
-};
-
-&gpu {
-	status = "okay";
-};
-
-&mdss {
-	status = "okay";
-};
-
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@a {
-			status = "okay";
-
-			v1p8-supply = <&pma8084_l6>;
-			v3p3-supply = <&pma8084_l24>;
-
-			qcom,init-seq = /bits/ 8 <0x1 0x64>;
-		};
-	};
-};
-
-&pma8084_gpios {
-	gpio_keys_pin_a: gpio-keys-active-state {
-		pins = "gpio2", "gpio3", "gpio5";
-		function = "normal";
-
-		bias-pull-up;
-		power-source = <PMA8084_GPIO_S4>;
-	};
-
-	touchkey_pin: touchkey-int-state {
-		pins = "gpio6";
-		function = "normal";
-		bias-disable;
-		input-enable;
-		power-source = <PMA8084_GPIO_S4>;
-	};
-
-	touch_pin: touchscreen-int-state {
-		pins = "gpio8";
-		function = "normal";
-		bias-disable;
-		input-enable;
-		power-source = <PMA8084_GPIO_S4>;
-	};
-
-	panel_en_pin: panel-en-state {
-		pins = "gpio14";
-		function = "normal";
-		bias-pull-up;
-		power-source = <PMA8084_GPIO_S4>;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-	};
-
-	wlan_sleep_clk_pin: wlan-sleep-clk-state {
-		pins = "gpio16";
-		function = "func2";
-
-		output-high;
-		power-source = <PMA8084_GPIO_S4>;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
-	};
-
-	panel_rst_pin: panel-rst-state {
-		pins = "gpio17";
-		function = "normal";
-		bias-disable;
-		power-source = <PMA8084_GPIO_S4>;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-	};
-
-	fuelgauge_pin: fuelgauge-int-state {
-		pins = "gpio21";
-		function = "normal";
-		bias-disable;
-		input-enable;
-		power-source = <PMA8084_GPIO_S4>;
-	};
-};
-
-&remoteproc_adsp {
-	status = "okay";
-	cx-supply = <&pma8084_s2>;
-};
-
-&remoteproc_mss {
-	status = "okay";
-	cx-supply = <&pma8084_s2>;
-	mss-supply = <&pma8084_s6>;
-	mx-supply = <&pma8084_s1>;
-	pll-supply = <&pma8084_l12>;
-};
-
-&rpm_requests {
-	pma8084-regulators {
-		compatible = "qcom,rpm-pma8084-regulators";
-
-		pma8084_s1: s1 {
-			regulator-min-microvolt = <675000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-always-on;
-		};
-
-		pma8084_s2: s2 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pma8084_s3: s3 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		pma8084_s4: s4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_s5: s5 {
-			regulator-min-microvolt = <2150000>;
-			regulator-max-microvolt = <2150000>;
-		};
-
-		pma8084_s6: s6 {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pma8084_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pma8084_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pma8084_l3: l3 {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pma8084_l4: l4 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pma8084_l5: l5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l7: l7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l9: l9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pma8084_l10: l10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pma8084_l11: l11 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		pma8084_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		pma8084_l13: l13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pma8084_l14: l14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l15: l15 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pma8084_l16: l16 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pma8084_l17: l17 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pma8084_l18: l18 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pma8084_l19: l19 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pma8084_l20: l20 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-system-load = <200000>;
-			regulator-allow-set-load;
-		};
-
-		pma8084_l21: l21 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-system-load = <200000>;
-			regulator-allow-set-load;
-		};
-
-		pma8084_l22: l22 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pma8084_l23: l23 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pma8084_l24: l24 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-		};
-
-		pma8084_l25: l25 {
-			regulator-min-microvolt = <2100000>;
-			regulator-max-microvolt = <2100000>;
-		};
-
-		pma8084_l26: l26 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pma8084_l27: l27 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pma8084_lvs1: lvs1 {};
-		pma8084_lvs2: lvs2 {};
-		pma8084_lvs3: lvs3 {};
-		pma8084_lvs4: lvs4 {};
-
-		pma8084_5vs1: 5vs1 {};
-	};
-};
-
-&sdhc_1 {
-	status = "okay";
-
-	vmmc-supply = <&pma8084_l20>;
-	vqmmc-supply = <&pma8084_s4>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-};
-
-&sdhc_2 {
-	status = "okay";
-	max-frequency = <100000000>;
-	vmmc-supply = <&vreg_wlan>;
-	vqmmc-supply = <&pma8084_s4>;
-	non-removable;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
-
-	wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
-	};
-};
-
-&sdhc_3 {
-	status = "okay";
-	max-frequency = <100000000>;
-	vmmc-supply = <&pma8084_l21>;
-	vqmmc-supply = <&pma8084_l13>;
-
-	/*
-	 * cd-gpio is intentionally disabled. If enabled, an SD card
-	 * present during boot is not initialized correctly. Without
-	 * cd-gpios the driver resorts to polling, so hotplug works.
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>;
-	/* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
-};
-
-&tlmm {
-	/* This seems suspicious, but somebody with this device should look into it. */
-	blsp2_uart2_pins_active: blsp2-uart2-pins-active {
-		pins = "gpio45", "gpio46", "gpio47", "gpio48";
-		function = "blsp_uart8";
-		drive-strength = <8>;
-		bias-disable;
-	};
-
-	blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep {
-		pins = "gpio45", "gpio46", "gpio47", "gpio48";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	bt_pins: bt-pins {
-		hostwake {
-			pins = "gpio75";
-			function = "gpio";
-			drive-strength = <16>;
-			input-enable;
-		};
-
-		devwake {
-			pins = "gpio91";
-			function = "gpio";
-			drive-strength = <2>;
-		};
-	};
-
-	sdc1_on: sdhc1-on {
-		clk {
-			pins = "sdc1_clk";
-			drive-strength = <4>;
-			bias-disable;
-		};
-
-		cmd-data {
-			pins = "sdc1_cmd", "sdc1_data";
-			drive-strength = <4>;
-			bias-pull-up;
-		};
-	};
-
-	sdc3_on: sdc3-on {
-		pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
-		function = "sdc3";
-		drive-strength = <8>;
-		bias-disable;
-	};
-
-	sdhc3_cd_pin: sdc3-cd-on {
-		pins = "gpio62";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	sdc2_on: sdhc2-on {
-		clk {
-			pins = "sdc2_clk";
-			drive-strength = <6>;
-			bias-disable;
-		};
-
-		cmd-data {
-			pins = "sdc2_cmd", "sdc2_data";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-	};
-
-	i2c_touchkey_pins: i2c-touchkey {
-		pins = "gpio95", "gpio96";
-		function = "gpio";
-		input-enable;
-		bias-pull-up;
-	};
-
-	i2c_led_gpioex_pins: i2c-led-gpioex {
-		pins = "gpio120", "gpio121";
-		function = "gpio";
-		input-enable;
-		bias-pull-down;
-	};
-
-	gpioex_pin: gpioex {
-		pins = "gpio145";
-		function = "gpio";
-		bias-pull-up;
-		drive-strength = <2>;
-	};
-
-	wifi_pin: wifi {
-		pins = "gpio92";
-		function = "gpio";
-		input-enable;
-		bias-pull-down;
-	};
-
-	panel_te_pin: panel {
-		pins = "gpio12";
-		function = "mdp_vsync";
-		drive-strength = <2>;
-		bias-disable;
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
deleted file mode 100644
index 3f45f5c5d37b..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ /dev/null
@@ -1,638 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "Sony Xperia Z2 Tablet";
-	compatible = "sony,xperia-castor", "qcom,msm8974";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-		serial1 = &blsp2_uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		key-volume-down {
-			label = "volume_down";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		key-camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA>;
-		};
-
-		key-camera-focus {
-			label = "camera_focus";
-			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA_FOCUS>;
-		};
-
-		key-volume-up {
-			label = "volume_up";
-			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	vreg_bl_vddio: lcd-backlight-vddio {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_bl_vddio";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-
-		gpio = <&tlmm 69 0>;
-		enable-active-high;
-
-		vin-supply = <&pm8941_s3>;
-		startup-delay-us = <70000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_backlight_en_pin_a>;
-	};
-
-	vreg_vsp: lcd-dcdc-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_vsp";
-		regulator-min-microvolt = <5600000>;
-		regulator-max-microvolt = <5600000>;
-
-		gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
-	};
-
-	vreg_wlan: wlan-regulator {
-		compatible = "regulator-fixed";
-
-		regulator-name = "wl-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_regulator_pin>;
-	};
-};
-
-&blsp1_uart2 {
-	status = "okay";
-};
-
-&blsp2_i2c2 {
-	status = "okay";
-	clock-frequency = <355000>;
-
-	synaptics@2c {
-		compatible = "syna,rmi4-i2c";
-		reg = <0x2c>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd-supply = <&pm8941_l22>;
-		vio-supply = <&pm8941_lvs3>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_pin>;
-
-		syna,startup-delay-ms = <10>;
-
-		rmi-f01@1 {
-			reg = <0x1>;
-			syna,nosleep = <1>;
-		};
-
-		rmi-f11@11 {
-			reg = <0x11>;
-			syna,f11-flip-x = <1>;
-			syna,sensor-type = <1>;
-		};
-	};
-};
-
-&blsp2_i2c5 {
-	status = "okay";
-	clock-frequency = <355000>;
-
-	lp8566_wled: backlight@2c {
-		compatible = "ti,lp8556";
-		reg = <0x2c>;
-		power-supply = <&vreg_bl_vddio>;
-
-		bl-name = "backlight";
-		dev-ctrl = /bits/ 8 <0x05>;
-		init-brt = /bits/ 8 <0x3f>;
-		rom_a0h {
-			rom-addr = /bits/ 8 <0xa0>;
-			rom-val = /bits/ 8 <0xff>;
-		};
-		rom_a1h {
-			rom-addr = /bits/ 8 <0xa1>;
-			rom-val = /bits/ 8 <0x3f>;
-		};
-		rom_a2h {
-			rom-addr = /bits/ 8 <0xa2>;
-			rom-val = /bits/ 8 <0x20>;
-		};
-		rom_a3h {
-			rom-addr = /bits/ 8 <0xa3>;
-			rom-val = /bits/ 8 <0x5e>;
-		};
-		rom_a4h {
-			rom-addr = /bits/ 8 <0xa4>;
-			rom-val = /bits/ 8 <0x02>;
-		};
-		rom_a5h {
-			rom-addr = /bits/ 8 <0xa5>;
-			rom-val = /bits/ 8 <0x04>;
-		};
-		rom_a6h {
-			rom-addr = /bits/ 8 <0xa6>;
-			rom-val = /bits/ 8 <0x80>;
-		};
-		rom_a7h {
-			rom-addr = /bits/ 8 <0xa7>;
-			rom-val = /bits/ 8 <0xf7>;
-		};
-		rom_a9h {
-			rom-addr = /bits/ 8 <0xa9>;
-			rom-val = /bits/ 8 <0x80>;
-		};
-		rom_aah {
-			rom-addr = /bits/ 8 <0xaa>;
-			rom-val = /bits/ 8 <0x0f>;
-		};
-		rom_aeh {
-			rom-addr = /bits/ 8 <0xae>;
-			rom-val = /bits/ 8 <0x0f>;
-		};
-	};
-};
-
-&blsp2_uart1 {
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <3000000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
-
-		host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@a {
-			status = "okay";
-
-			v1p8-supply = <&pm8941_l6>;
-			v3p3-supply = <&pm8941_l24>;
-
-			extcon = <&smbb>;
-			qcom,init-seq = /bits/ 8 <0x1 0x64>;
-		};
-	};
-};
-
-&pm8941_coincell {
-	status = "okay";
-
-	qcom,rset-ohms = <2100>;
-	qcom,vset-millivolts = <3000>;
-};
-
-&pm8941_gpios {
-	gpio_keys_pin_a: gpio-keys-active-state {
-		pins = "gpio2", "gpio5";
-		function = "normal";
-
-		bias-pull-up;
-		power-source = <PM8941_GPIO_S3>;
-	};
-
-	bt_reg_on_pin: bt-reg-on-state {
-		pins = "gpio16";
-		function = "normal";
-
-		output-low;
-		power-source = <PM8941_GPIO_S3>;
-	};
-
-	wlan_sleep_clk_pin: wl-sleep-clk-state {
-		pins = "gpio17";
-		function = "func2";
-
-		output-high;
-		power-source = <PM8941_GPIO_S3>;
-	};
-
-	wlan_regulator_pin: wl-reg-active-state {
-		pins = "gpio18";
-		function = "normal";
-
-		bias-disable;
-		power-source = <PM8941_GPIO_S3>;
-	};
-
-	lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
-		pins = "gpio20";
-		function = "normal";
-
-		bias-disable;
-		power-source = <PM8941_GPIO_S3>;
-		input-disable;
-		output-low;
-	};
-
-};
-
-&pm8941_lpg {
-	status = "okay";
-
-	qcom,power-source = <1>;
-
-	rgb-led {
-		color = <LED_COLOR_ID_RGB>;
-		function = LED_FUNCTION_STATUS;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		led@5 {
-			reg = <5>;
-			color = <LED_COLOR_ID_BLUE>;
-		};
-
-		led@6 {
-			reg = <6>;
-			color = <LED_COLOR_ID_GREEN>;
-		};
-
-		led@7 {
-			reg = <7>;
-			color = <LED_COLOR_ID_RED>;
-		};
-	};
-};
-
-&rpm_requests {
-	pm8941-regulators {
-		compatible = "qcom,rpm-pm8941-regulators";
-
-		vdd_l1_l3-supply = <&pm8941_s1>;
-		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-		vdd_l4_l11-supply = <&pm8941_s1>;
-		vdd_l5_l7-supply = <&pm8941_s2>;
-		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-		vdd_l21-supply = <&vreg_boost>;
-
-		pm8941_s1: s1 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_s2: s2 {
-			regulator-min-microvolt = <2150000>;
-			regulator-max-microvolt = <2150000>;
-			regulator-boot-on;
-		};
-
-		pm8941_s3: s3 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-system-load = <154000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_s4: s4 {
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-
-		pm8941_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8941_l3: l3 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8941_l4: l4 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8941_l5: l5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l7: l7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l9: l9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8941_l11: l11 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1350000>;
-		};
-
-		pm8941_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l13: l13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l14: l14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l15: l15 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pm8941_l16: l16 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pm8941_l17: l17 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pm8941_l18: l18 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pm8941_l19: l19 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pm8941_l20: l20 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-system-load = <500000>;
-			regulator-allow-set-load;
-			regulator-boot-on;
-		};
-
-		pm8941_l21: l21 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l22: l22 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8941_l23: l23 {
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-		};
-
-		pm8941_l24: l24 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-			regulator-boot-on;
-		};
-
-		pm8941_lvs3: lvs3 {};
-	};
-};
-
-&sdhc_1 {
-	status = "okay";
-
-	vmmc-supply = <&pm8941_l20>;
-	vqmmc-supply = <&pm8941_s3>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-};
-
-&sdhc_2 {
-	status = "okay";
-
-	vmmc-supply = <&pm8941_l21>;
-	vqmmc-supply = <&pm8941_l13>;
-
-	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
-};
-
-&sdhc_3 {
-	status = "okay";
-
-	max-frequency = <100000000>;
-	vmmc-supply = <&vreg_wlan>;
-	non-removable;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdc3_on>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	bcrmf@1 {
-		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
-		reg = <1>;
-
-		brcm,drive-strength = <10>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_sleep_clk_pin>;
-	};
-};
-
-&smbb {
-	qcom,fast-charge-safe-current = <1500000>;
-	qcom,fast-charge-current-limit = <1500000>;
-	qcom,dc-current-limit = <1800000>;
-	qcom,fast-charge-safe-voltage = <4400000>;
-	qcom,fast-charge-high-threshold-voltage = <4350000>;
-	qcom,fast-charge-low-threshold-voltage = <3400000>;
-	qcom,auto-recharge-threshold-voltage = <4200000>;
-	qcom,minimum-input-voltage = <4300000>;
-};
-
-&tlmm {
-	lcd_backlight_en_pin_a: lcd-backlight-vddio {
-		pins = "gpio69";
-		drive-strength = <10>;
-		output-low;
-		bias-disable;
-	};
-
-	sdc1_on: sdc1-on {
-		clk {
-			pins = "sdc1_clk";
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		cmd-data {
-			pins = "sdc1_cmd", "sdc1_data";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
-
-	sdc2_on: sdc2-on {
-		clk {
-			pins = "sdc2_clk";
-			drive-strength = <6>;
-			bias-disable;
-		};
-
-		cmd-data {
-			pins = "sdc2_cmd", "sdc2_data";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-
-		cd {
-			pins = "gpio62";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	sdc3_on: sdc3-on {
-		clk {
-			pins = "gpio40";
-			function = "sdc3";
-			drive-strength = <10>;
-			bias-disable;
-		};
-
-		cmd {
-			pins = "gpio39";
-			function = "sdc3";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-
-		data {
-			pins = "gpio35", "gpio36", "gpio37", "gpio38";
-			function = "sdc3";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
-
-	ts_int_pin: ts-int-pin {
-		pins = "gpio86";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-		input-enable;
-	};
-
-	bt_host_wake_pin: bt-host-wake {
-		pins = "gpio95";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-		output-low;
-	};
-
-	bt_dev_wake_pin: bt-dev-wake {
-		pins = "gpio96";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom-msm8974pro.dtsi
deleted file mode 100644
index 1e882e16a221..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974pro.dtsi
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974.dtsi"
-
-&gcc {
-	compatible = "qcom,gcc-msm8974pro";
-};
-
-&gpu {
-	compatible = "qcom,adreno-330.2", "qcom,adreno";
-};
-
-&sdhc_1 {
-	clocks = <&gcc GCC_SDCC1_APPS_CLK>,
-		 <&gcc GCC_SDCC1_AHB_CLK>,
-		 <&xo_board>,
-		 <&gcc GCC_SDCC1_CDCCAL_FF_CLK>,
-		 <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>;
-	clock-names = "core", "iface", "xo", "cal", "sleep";
-};
diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi
deleted file mode 100644
index 9b7d9d04ded6..000000000000
--- a/arch/arm/boot/dts/qcom-pm8226.dtsi
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-
-&spmi_bus {
-	pm8226_0: pm8226@0 {
-		compatible = "qcom,pm8226", "qcom,spmi-pmic";
-		reg = <0x0 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pwrkey@800 {
-			compatible = "qcom,pm8941-pwrkey";
-			reg = <0x800>;
-			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-			debounce = <15625>;
-			bias-pull-up;
-		};
-
-		smbb: charger@1000 {
-			compatible = "qcom,pm8226-charger";
-			reg = <0x1000>;
-			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "chg-done",
-					  "chg-fast",
-					  "chg-trkl",
-					  "bat-temp-ok",
-					  "bat-present",
-					  "chg-gone",
-					  "usb-valid",
-					  "dc-valid";
-
-			chg_otg: otg-vbus { };
-		};
-
-		rtc@6000 {
-			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>, <0x6100>;
-			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		pm8226_vadc: adc@3100 {
-			compatible = "qcom,spmi-vadc";
-			reg = <0x3100>;
-			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#io-channel-cells = <1>;
-
-			adc-chan@7 {
-				reg = <VADC_VSYS>;
-				qcom,pre-scaling = <1 3>;
-				label = "vph_pwr";
-			};
-			adc-chan@8 {
-				reg = <VADC_DIE_TEMP>;
-				label = "die_temp";
-			};
-			adc-chan@9 {
-				reg = <VADC_REF_625MV>;
-				label = "ref_625mv";
-			};
-			adc-chan@a {
-				reg = <VADC_REF_1250MV>;
-				label = "ref_1250mv";
-			};
-			adc-chan@e {
-				reg = <VADC_GND_REF>;
-			};
-			adc-chan@f {
-				reg = <VADC_VDD_VADC>;
-			};
-		};
-
-		pm8226_mpps: mpps@a000 {
-			compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp";
-			reg = <0xa000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pm8226_mpps 0 0 8>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	pm8226_1: pm8226@1 {
-		compatible = "qcom,pm8226", "qcom,spmi-pmic";
-		reg = <0x1 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pm8226_spmi_regulators: pm8226-regulators {
-			compatible = "qcom,pm8226-regulators";
-		};
-
-		pm8226_vib: vibrator@c000 {
-			compatible = "qcom,pm8916-vib";
-			reg = <0xc000>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi
deleted file mode 100644
index b5cdde034d18..000000000000
--- a/arch/arm/boot/dts/qcom-pm8841.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-&spmi_bus {
-
-	pm8841_0: pm8841@4 {
-		compatible = "qcom,pm8841", "qcom,spmi-pmic";
-		reg = <0x4 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pm8841_mpps: mpps@a000 {
-			compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
-			reg = <0xa000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pm8841_mpps 0 0 4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		temp-alarm@2400 {
-			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400>;
-			interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
-			#thermal-sensor-cells = <0>;
-		};
-	};
-
-	pm8841_1: pm8841@5 {
-		compatible = "qcom,pm8841", "qcom,spmi-pmic";
-		reg = <0x5 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
deleted file mode 100644
index 59d0cde63251..000000000000
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ /dev/null
@@ -1,198 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-&spmi_bus {
-
-	pm8941_0: pm8941@0 {
-		compatible = "qcom,pm8941", "qcom,spmi-pmic";
-		reg = <0x0 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc@6000 {
-			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>,
-			      <0x6100>;
-			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		pwrkey@800 {
-			compatible = "qcom,pm8941-pwrkey";
-			reg = <0x800>;
-			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-			debounce = <15625>;
-			bias-pull-up;
-		};
-
-		usb_id: misc@900 {
-			compatible = "qcom,pm8941-misc";
-			reg = <0x900>;
-			interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "usb_id";
-		};
-
-		smbb: charger@1000 {
-			compatible = "qcom,pm8941-charger";
-			reg = <0x1000>;
-			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
-				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "chg-done",
-					  "chg-fast",
-					  "chg-trkl",
-					  "bat-temp-ok",
-					  "bat-present",
-					  "chg-gone",
-					  "usb-valid",
-					  "dc-valid";
-
-			usb-otg-in-supply = <&pm8941_5vs1>;
-
-			chg_otg: otg-vbus { };
-		};
-
-		pm8941_gpios: gpios@c000 {
-			compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			gpio-ranges = <&pm8941_gpios 0 0 36>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			boost_bypass_n_pin: boost-bypass-state {
-				pins = "gpio21";
-				function = "normal";
-			};
-		};
-
-		pm8941_mpps: mpps@a000 {
-			compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
-			reg = <0xa000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pm8941_mpps 0 0 8>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pm8941_temp: temp-alarm@2400 {
-			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400>;
-			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
-			io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
-			io-channel-names = "thermal";
-			#thermal-sensor-cells = <0>;
-		};
-
-		pm8941_vadc: vadc@3100 {
-			compatible = "qcom,spmi-vadc";
-			reg = <0x3100>;
-			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#io-channel-cells = <1>;
-
-			bat_temp {
-				reg = <VADC_LR_MUX1_BAT_THERM>;
-			};
-			die_temp {
-				reg = <VADC_DIE_TEMP>;
-			};
-			ref_625mv {
-				reg = <VADC_REF_625MV>;
-			};
-			ref_1250v {
-				reg = <VADC_REF_1250MV>;
-			};
-			ref_gnd {
-				reg = <VADC_GND_REF>;
-			};
-			ref_vdd {
-				reg = <VADC_VDD_VADC>;
-			};
-			vbat_sns {
-				reg = <VADC_VBAT_SNS>;
-			};
-		};
-
-		pm8941_iadc: iadc@3600 {
-			compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
-			reg = <0x3600>;
-			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
-			qcom,external-resistor-micro-ohms = <10000>;
-		};
-
-		pm8941_coincell: coincell@2800 {
-			compatible = "qcom,pm8941-coincell";
-			reg = <0x2800>;
-			status = "disabled";
-		};
-	};
-
-	pm8941_1: pm8941@1 {
-		compatible = "qcom,pm8941", "qcom,spmi-pmic";
-		reg = <0x1 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pm8941_lpg: lpg {
-			compatible = "qcom,pm8941-lpg";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#pwm-cells = <2>;
-
-			status = "disabled";
-		};
-
-		pm8941_wled: wled@d800 {
-			compatible = "qcom,pm8941-wled";
-			reg = <0xd800>;
-			label = "backlight";
-
-			status = "disabled";
-		};
-
-		regulators {
-			compatible = "qcom,pm8941-regulators";
-			interrupts = <0x1 0x83 0x2 0>, <0x1 0x84 0x2 0>;
-			interrupt-names = "ocp-5vs1", "ocp-5vs2";
-			vin_5vs-supply = <&pm8941_5v>;
-
-			pm8941_5v: s4 {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5000000>;
-				regulator-enable-ramp-delay = <500>;
-			};
-
-			pm8941_5vs1: 5vs1 {
-				regulator-enable-ramp-delay = <1000>;
-				regulator-pull-down;
-				regulator-over-current-protection;
-				qcom,ocp-max-retries = <10>;
-				qcom,ocp-retry-delay = <30>;
-				qcom,vs-soft-start-strength = <0>;
-				regulator-initial-mode = <1>;
-			};
-
-			pm8941_5vs2: 5vs2 {
-				regulator-enable-ramp-delay = <1000>;
-				regulator-pull-down;
-				regulator-over-current-protection;
-				qcom,ocp-max-retries = <10>;
-				qcom,ocp-retry-delay = <30>;
-				qcom,vs-soft-start-strength = <0>;
-				regulator-initial-mode = <1>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
deleted file mode 100644
index 7b8a8d9695da..000000000000
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-&spmi_bus {
-
-	pma8084_0: pma8084@0 {
-		compatible = "qcom,pma8084", "qcom,spmi-pmic";
-		reg = <0x0 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc@6000 {
-			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>,
-			      <0x6100>;
-			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		pwrkey@800 {
-			compatible = "qcom,pm8941-pwrkey";
-			reg = <0x800>;
-			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-			debounce = <15625>;
-			bias-pull-up;
-		};
-
-		pma8084_gpios: gpios@c000 {
-			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			gpio-ranges = <&pma8084_gpios 0 0 22>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pma8084_mpps: mpps@a000 {
-			compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
-			reg = <0xa000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pma8084_mpps 0 0 8>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pma8084_temp: temp-alarm@2400 {
-			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400>;
-			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
-			#thermal-sensor-cells = <0>;
-			io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
-			io-channel-names = "thermal";
-		};
-
-		pma8084_vadc: vadc@3100 {
-			compatible = "qcom,spmi-vadc";
-			reg = <0x3100>;
-			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#io-channel-cells = <1>;
-
-			die_temp {
-				reg = <VADC_DIE_TEMP>;
-			};
-			ref_625mv {
-				reg = <VADC_REF_625MV>;
-			};
-			ref_1250v {
-				reg = <VADC_REF_1250MV>;
-			};
-			ref_buf_625mv {
-				reg = <VADC_SPARE1>;
-			};
-			ref_gnd {
-				reg = <VADC_GND_REF>;
-			};
-			ref_vdd {
-				reg = <VADC_VDD_VADC>;
-			};
-		};
-	};
-
-	pma8084_1: pma8084@1 {
-		compatible = "qcom,pma8084", "qcom,spmi-pmic";
-		reg = <0x1 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-pmx55.dtsi b/arch/arm/boot/dts/qcom-pmx55.dtsi
deleted file mode 100644
index 9de7578a4c5f..000000000000
--- a/arch/arm/boot/dts/qcom-pmx55.dtsi
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-
-/*
- * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
- * Copyright (c) 2020, Linaro Limited
- */
-
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-&spmi_bus {
-	pmic@8 {
-		compatible = "qcom,pmx55", "qcom,spmi-pmic";
-		reg = <0x8 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		power-on@800 {
-			compatible = "qcom,pm8916-pon";
-			reg = <0x0800>;
-
-			status = "disabled";
-		};
-
-		pmx55_temp: temp-alarm@2400 {
-			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400>;
-			interrupts = <0x8 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
-			io-channels = <&pmx55_adc ADC5_DIE_TEMP>;
-			io-channel-names = "thermal";
-			#thermal-sensor-cells = <0>;
-		};
-
-		pmx55_adc: adc@3100 {
-			compatible = "qcom,spmi-adc5";
-			reg = <0x3100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#io-channel-cells = <1>;
-			interrupts = <0x8 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
-
-			ref-gnd@0 {
-				reg = <ADC5_REF_GND>;
-				qcom,pre-scaling = <1 1>;
-				label = "ref_gnd";
-			};
-
-			vref-1p25@1 {
-				reg = <ADC5_1P25VREF>;
-				qcom,pre-scaling = <1 1>;
-				label = "vref_1p25";
-			};
-
-			die-temp@6 {
-				reg = <ADC5_DIE_TEMP>;
-				qcom,pre-scaling = <1 1>;
-				label = "die_temp";
-			};
-
-			chg-temp@9 {
-				reg = <ADC5_CHG_TEMP>;
-				qcom,pre-scaling = <1 1>;
-				label = "chg_temp";
-			};
-		};
-
-		pmx55_gpios: gpio@c000 {
-			compatible = "qcom,pmx55-gpio", "qcom,spmi-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			gpio-ranges = <&pmx55_gpios 0 0 11>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	pmic@9 {
-		compatible = "qcom,pmx55", "qcom,spmi-pmic";
-		reg = <0x9 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom-pmx65.dtsi
deleted file mode 100644
index abf229a8b75a..000000000000
--- a/arch/arm/boot/dts/qcom-pmx65.dtsi
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-&spmi_bus {
-	pmic@1 {
-		compatible = "qcom,pmx65", "qcom,spmi-pmic";
-		reg = <1 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pmx65_temp: temp-alarm@a00 {
-			compatible = "qcom,spmi-temp-alarm";
-			reg = <0xa00>;
-			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
-			#thermal-sensor-cells = <0>;
-		};
-
-		pmx65_gpios: pinctrl@8800 {
-			compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio";
-			reg = <0x8800>;
-			gpio-controller;
-			gpio-ranges = <&pmx65_gpios 0 0 16>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
deleted file mode 100644
index 8daefd50217a..000000000000
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ /dev/null
@@ -1,682 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * SDX65 SoC device tree source
- *
- * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
- *
- */
-
-#include <dt-bindings/clock/qcom,gcc-sdx65.h>
-#include <dt-bindings/clock/qcom,rpmh.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/power/qcom-rpmpd.h>
-#include <dt-bindings/soc/qcom,rpmh-rsc.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	qcom,msm-id = <458 0x10000>, <483 0x10000>, <509 0x10000>;
-	interrupt-parent = <&intc>;
-
-	memory {
-		device_type = "memory";
-		reg = <0 0>;
-	};
-
-	clocks {
-		xo_board: xo-board {
-			compatible = "fixed-clock";
-			clock-frequency = <76800000>;
-			clock-output-names = "xo_board";
-			#clock-cells = <0>;
-		};
-
-		sleep_clk: sleep-clk {
-			compatible = "fixed-clock";
-			clock-frequency = <32764>;
-			clock-output-names = "sleep_clk";
-			#clock-cells = <0>;
-		};
-
-		nand_clk_dummy: nand-clk-dummy {
-			compatible = "fixed-clock";
-			clock-frequency = <32764>;
-			#clock-cells = <0>;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-			enable-method = "psci";
-			clocks = <&apcs>;
-			power-domains = <&rpmhpd SDX65_CX_AO>;
-			power-domain-names = "rpmhpd";
-			operating-points-v2 = <&cpu_opp_table>;
-		};
-	};
-
-	cpu_opp_table: cpu-opp-table {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-345600000 {
-			opp-hz = /bits/ 64 <345600000>;
-			required-opps = <&rpmhpd_opp_low_svs>;
-		};
-
-		opp-576000000 {
-			opp-hz = /bits/ 64 <576000000>;
-			required-opps = <&rpmhpd_opp_svs>;
-		};
-
-		opp-1094400000 {
-			opp-hz = /bits/ 64 <1094400000>;
-			required-opps = <&rpmhpd_opp_nom>;
-		};
-
-		opp-1497600000 {
-			opp-hz = /bits/ 64 <1497600000>;
-			required-opps = <&rpmhpd_opp_turbo>;
-		};
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-sdx65", "qcom,scm";
-		};
-	};
-
-	mc_virt: interconnect-mc-virt {
-		compatible = "qcom,sdx65-mc-virt";
-		#interconnect-cells = <1>;
-		qcom,bcm-voters = <&apps_bcm_voter>;
-	};
-
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-	};
-
-	reserved_memory: reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		tz_heap_mem: memory@8fcad000 {
-			no-map;
-			reg = <0x8fcad000 0x40000>;
-		};
-
-		secdata_mem: memory@8fcfd000 {
-			no-map;
-			reg = <0x8fcfd000 0x1000>;
-		};
-
-		hyp_mem: memory@8fd00000 {
-			no-map;
-			reg = <0x8fd00000 0x80000>;
-		};
-
-		access_control_mem: memory@8fd80000 {
-			no-map;
-			reg = <0x8fd80000 0x80000>;
-		};
-
-		aop_mem: memory@8fe00000 {
-			no-map;
-			reg = <0x8fe00000 0x20000>;
-		};
-
-		smem_mem: memory@8fe20000 {
-			compatible = "qcom,smem";
-			reg = <0x8fe20000 0xc0000>;
-			hwlocks = <&tcsr_mutex 3>;
-			no-map;
-		};
-
-		cmd_db: reserved-memory@8fee0000 {
-			compatible = "qcom,cmd-db";
-			reg = <0x8fee0000 0x20000>;
-			no-map;
-		};
-
-		tz_mem: memory@8ff00000 {
-			no-map;
-			reg = <0x8ff00000 0x100000>;
-		};
-
-		tz_apps_mem: memory@90000000 {
-			no-map;
-			reg = <0x90000000 0x500000>;
-		};
-
-		llcc_tcm_mem: memory@15800000 {
-			no-map;
-			reg = <0x15800000 0x800000>;
-		};
-	};
-
-	smp2p-mpss {
-		compatible = "qcom,smp2p";
-		qcom,smem = <435>, <428>;
-		interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
-		mboxes = <&apcs 14>;
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <1>;
-
-		modem_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		modem_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		ipa_smp2p_out: ipa-ap-to-modem {
-			qcom,entry-name = "ipa";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		ipa_smp2p_in: ipa-modem-to-ap {
-			qcom,entry-name = "ipa";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		gcc: clock-controller@100000 {
-			compatible = "qcom,gcc-sdx65";
-			reg = <0x00100000 0x001f7400>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
-			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
-			#power-domain-cells = <1>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		blsp1_uart3: serial@831000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x00831000 0x200>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		usb_hsphy: phy@ff4000 {
-			compatible = "qcom,usb-snps-hs-7nm-phy";
-			reg = <0xff4000 0x120>;
-			#phy-cells = <0>;
-			status = "disabled";
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "ref";
-			resets = <&gcc GCC_QUSB2PHY_BCR>;
-		};
-
-		usb_qmpphy: phy@ff6000 {
-			compatible = "qcom,sdx65-qmp-usb3-uni-phy";
-			reg = <0x00ff6000 0x1c8>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_PRIM_CLKREF_EN>;
-			clock-names = "aux", "cfg_ahb", "ref";
-
-			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
-				 <&gcc GCC_USB3_PHY_BCR>;
-			reset-names = "phy", "common";
-
-			usb_ssphy: phy@ff6200 {
-				reg = <0x00ff6e00 0x160>,
-				      <0x00ff7000 0x1ec>,
-				      <0x00ff6200 0x1e00>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
-		};
-
-		system_noc: interconnect@1620000 {
-			compatible = "qcom,sdx65-system-noc";
-			reg = <0x01620000 0x31200>;
-			#interconnect-cells = <1>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
-		qpic_bam: dma-controller@1b04000 {
-			compatible = "qcom,bam-v1.7.0";
-			reg = <0x01b04000 0x1c000>;
-			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rpmhcc RPMH_QPIC_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-			qcom,controlled-remotely;
-			status = "disabled";
-		};
-
-		qpic_nand: nand-controller@1b30000 {
-			compatible = "qcom,sdx55-nand";
-			reg = <0x01b30000 0x10000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&rpmhcc RPMH_QPIC_CLK>,
-				 <&nand_clk_dummy>;
-			clock-names = "core", "aon";
-
-			dmas = <&qpic_bam 0>,
-			       <&qpic_bam 1>,
-			       <&qpic_bam 2>;
-			dma-names = "tx", "rx", "cmd";
-			status = "disabled";
-		};
-
-		tcsr_mutex: hwlock@1f40000 {
-			compatible = "qcom,tcsr-mutex";
-			reg = <0x01f40000 0x40000>;
-			#hwlock-cells = <1>;
-		};
-
-		remoteproc_mpss: remoteproc@4080000 {
-			compatible = "qcom,sdx55-mpss-pas";
-			reg = <0x04080000 0x4040>;
-
-			interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover",
-					  "stop-ack", "shutdown-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd SDX65_CX>,
-					<&rpmhpd SDX65_MSS>;
-			power-domain-names = "cx", "mss";
-
-			qcom,smem-states = <&modem_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
-				label = "mpss";
-				qcom,remote-pid = <1>;
-				mboxes = <&apcs 15>;
-			};
-		};
-
-		sdhc_1: mmc@8804000 {
-			compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5";
-			reg = <0x08804000 0x1000>;
-			reg-names = "hc_mem";
-			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_SDCC1_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		mem_noc: interconnect@9680000 {
-			compatible = "qcom,sdx65-mem-noc";
-			reg = <0x09680000 0x27200>;
-			#interconnect-cells = <1>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
-		usb: usb@a6f8800 {
-			compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
-			reg = <0x0a6f8800 0x400>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
-				 <&gcc GCC_USB30_MASTER_CLK>,
-				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
-				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-				 <&gcc GCC_USB30_SLEEP_CLK>;
-			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
-					"sleep";
-
-			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <200000000>;
-
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 76 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 18 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 19 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
-					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
-
-			power-domains = <&gcc USB30_GDSC>;
-
-			resets = <&gcc GCC_USB30_BCR>;
-
-			usb_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0x0a600000 0xcd00>;
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x1a0 0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				phys = <&usb_hsphy>, <&usb_ssphy>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		restart@c264000 {
-			compatible = "qcom,pshold";
-			reg = <0x0c264000 0x1000>;
-		};
-
-		spmi_bus: qcom,spmi@c440000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0xc440000 0xd00>,
-				<0xc600000 0x2000000>,
-				<0xe600000 0x100000>,
-				<0xe700000 0xa0000>,
-				<0xc40a000 0x26000>;
-			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "periph_irq";
-			interrupt-controller;
-			#interrupt-cells = <4>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			qcom,channel = <0>;
-			qcom,ee = <0>;
-		};
-
-		tlmm: pinctrl@f100000 {
-			compatible = "qcom,sdx65-tlmm";
-			reg = <0xf100000 0x300000>;
-			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 109>;
-			interrupt-controller;
-			interrupt-parent = <&intc>;
-			#interrupt-cells = <2>;
-		};
-
-		pdc: interrupt-controller@b210000 {
-			compatible = "qcom,sdx65-pdc", "qcom,pdc";
-			reg = <0xb210000 0x10000>;
-			qcom,pdc-ranges = <0 147 52>, <52 266 32>;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&intc>;
-			interrupt-controller;
-		};
-
-		imem@1468f000 {
-			compatible = "simple-mfd";
-			reg = <0x1468f000 0x1000>;
-			ranges = <0x0 0x1468f000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			pil-reloc@94c {
-				compatible = "qcom,pil-reloc-info";
-				reg = <0x94c 0xc8>;
-			};
-		};
-
-		apps_smmu: iommu@15000000 {
-			compatible = "qcom,sdx65-smmu-500", "arm,mmu-500";
-			reg = <0x15000000 0x40000>;
-			#iommu-cells = <2>;
-			#global-interrupts = <1>;
-			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		intc: interrupt-controller@17800000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			interrupt-parent = <&intc>;
-			#interrupt-cells = <3>;
-			reg = <0x17800000 0x1000>,
-			      <0x17802000 0x1000>;
-		};
-
-		a7pll: clock@17808000 {
-			compatible = "qcom,sdx55-a7pll";
-			reg = <0x17808000 0x1000>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "bi_tcxo";
-			#clock-cells = <0>;
-		};
-
-		apcs: mailbox@17810000 {
-			compatible = "qcom,sdx55-apcs-gcc", "syscon";
-			reg = <0x17810000 0x2000>;
-			#mbox-cells = <1>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>;
-			clock-names = "ref", "pll", "aux";
-			#clock-cells = <0>;
-		};
-
-		watchdog@17817000 {
-			compatible = "qcom,apss-wdt-sdx65", "qcom,kpss-wdt";
-			reg = <0x17817000 0x1000>;
-			clocks = <&sleep_clk>;
-		};
-
-		timer@17820000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0x17820000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame@17821000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 7 0x4>,
-					     <GIC_SPI 6 0x4>;
-				reg = <0x17821000 0x1000>,
-				      <0x17822000 0x1000>;
-			};
-
-			frame@17823000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 8 0x4>;
-				reg = <0x17823000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17824000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 9 0x4>;
-				reg = <0x17824000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17825000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 10 0x4>;
-				reg = <0x17825000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17826000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 11 0x4>;
-				reg = <0x17826000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17827000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 12 0x4>;
-				reg = <0x17827000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17828000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 13 0x4>;
-				reg = <0x17828000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@17829000 {
-				frame-number = <7>;
-				interrupts = <GIC_SPI 14 0x4>;
-				reg = <0x17829000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		apps_rsc: rsc@17830000 {
-			label = "apps_rsc";
-			compatible = "qcom,rpmh-rsc";
-			reg = <0x17830000 0x10000>,
-			    <0x17840000 0x10000>;
-			reg-names = "drv-0", "drv-1";
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				   <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,tcs-offset = <0xd00>;
-			qcom,drv-id = <1>;
-			qcom,tcs-config = <ACTIVE_TCS  2>,
-				<SLEEP_TCS   2>,
-				<WAKE_TCS    2>,
-				<CONTROL_TCS 1>;
-
-			rpmhcc: clock-controller {
-				compatible = "qcom,sdx65-rpmh-clk";
-				#clock-cells = <1>;
-				clock-names = "xo";
-				clocks = <&xo_board>;
-			};
-
-			rpmhpd: power-controller {
-				compatible = "qcom,sdx65-rpmhpd";
-				#power-domain-cells = <1>;
-				operating-points-v2 = <&rpmhpd_opp_table>;
-
-				rpmhpd_opp_table: opp-table {
-					compatible = "operating-points-v2";
-
-					rpmhpd_opp_ret: opp1 {
-						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
-					};
-
-					rpmhpd_opp_min_svs: opp2 {
-						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
-					};
-
-					rpmhpd_opp_low_svs: opp3 {
-						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-					};
-
-					rpmhpd_opp_svs: opp4 {
-						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-					};
-
-					rpmhpd_opp_svs_l1: opp5 {
-						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-					};
-
-					rpmhpd_opp_nom: opp6 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
-					};
-
-					rpmhpd_opp_nom_l1: opp7 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
-					};
-
-					rpmhpd_opp_nom_l2: opp8 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
-					};
-
-					rpmhpd_opp_turbo: opp9 {
-						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
-					};
-
-					rpmhpd_opp_turbo_l1: opp10 {
-						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-					};
-				};
-			};
-
-			apps_bcm_voter: bcm-voter {
-				compatible = "qcom,bcm-voter";
-			};
-
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			<1 12 0xf08>,
-			<1 10 0xf08>,
-			<1 11 0xf08>;
-		clock-frequency = <19200000>;
-	};
-};
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
new file mode 100644
index 000000000000..c7873dcef154
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_QCOM) += \
+	msm8226-motorola-falcon.dtb \
+	qcom-apq8016-sbc.dtb \
+	qcom-apq8026-asus-sparrow.dtb \
+	qcom-apq8026-huawei-sturgeon.dtb \
+	qcom-apq8026-lg-lenok.dtb \
+	qcom-apq8026-samsung-matisse-wifi.dtb \
+	qcom-apq8026-samsung-milletwifi.dtb \
+	qcom-apq8060-dragonboard.dtb \
+	qcom-apq8064-cm-qs600.dtb \
+	qcom-apq8064-ifc6410.dtb \
+	qcom-apq8064-sony-xperia-lagan-yuga.dtb \
+	qcom-apq8064-asus-nexus7-flo.dtb \
+	qcom-apq8064-lg-nexus4-mako.dtb \
+	qcom-apq8074-dragonboard.dtb \
+	qcom-apq8084-ifc6540.dtb \
+	qcom-apq8084-mtp.dtb \
+	qcom-ipq4018-ap120c-ac.dtb \
+	qcom-ipq4018-ap120c-ac-bit.dtb \
+	qcom-ipq4018-jalapeno.dtb \
+	qcom-ipq4019-ap.dk01.1-c1.dtb \
+	qcom-ipq4019-ap.dk04.1-c1.dtb \
+	qcom-ipq4019-ap.dk04.1-c3.dtb \
+	qcom-ipq4019-ap.dk07.1-c1.dtb \
+	qcom-ipq4019-ap.dk07.1-c2.dtb \
+	qcom-ipq8064-ap148.dtb \
+	qcom-ipq8064-rb3011.dtb \
+	qcom-msm8226-microsoft-dempsey.dtb \
+	qcom-msm8226-microsoft-makepeace.dtb \
+	qcom-msm8226-microsoft-moneypenny.dtb \
+	qcom-msm8226-samsung-ms013g.dtb \
+	qcom-msm8226-samsung-s3ve3g.dtb \
+	qcom-msm8660-surf.dtb \
+	qcom-msm8916-samsung-e5.dtb \
+	qcom-msm8916-samsung-e7.dtb \
+	qcom-msm8916-samsung-grandmax.dtb \
+	qcom-msm8916-samsung-serranove.dtb \
+	qcom-msm8926-htc-memul.dtb \
+	qcom-msm8926-microsoft-superman-lte.dtb \
+	qcom-msm8926-microsoft-tesla.dtb \
+	qcom-msm8926-motorola-peregrine.dtb \
+	qcom-msm8926-samsung-matisselte.dtb \
+	qcom-msm8960-cdp.dtb \
+	qcom-msm8960-samsung-expressatt.dtb \
+	qcom-msm8960-sony-huashan.dtb \
+	qcom-msm8974-lge-nexus5-hammerhead.dtb \
+	qcom-msm8974-samsung-hlte.dtb \
+	qcom-msm8974-sony-xperia-rhine-amami.dtb \
+	qcom-msm8974-sony-xperia-rhine-honami.dtb \
+	qcom-msm8974-sony-xperia-rhine-togari.dtb \
+	qcom-msm8974pro-fairphone-fp2.dtb \
+	qcom-msm8974pro-htc-m8.dtb \
+	qcom-msm8974pro-oneplus-bacon.dtb \
+	qcom-msm8974pro-samsung-klte.dtb \
+	qcom-msm8974pro-samsung-kltechn.dtb \
+	qcom-msm8974pro-sony-xperia-shinano-aries.dtb \
+	qcom-msm8974pro-sony-xperia-shinano-castor.dtb \
+	qcom-msm8974pro-sony-xperia-shinano-leo.dtb \
+	qcom-mdm9615-wp8548-mangoh-green.dtb \
+	qcom-sdx55-mtp.dtb \
+	qcom-sdx55-t55.dtb \
+	qcom-sdx55-telit-fn980-tlb.dtb \
+	qcom-sdx65-mtp.dtb
diff --git a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
new file mode 100644
index 000000000000..e6392f7d14c7
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+	model = "Motorola Moto G (2013)";
+	compatible = "motorola,falcon", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+			vsp-supply = <&reg_lcd_pos>;
+			vsn-supply = <&reg_lcd_neg>;
+			vddio-supply = <&vddio_disp_vreg>;
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_BYTE0_CLK>,
+				 <&mmcc MDSS_ESC0_CLK>,
+				 <&mmcc MDSS_MDP_CLK>,
+				 <&mmcc MMSS_MISC_AHB_CLK>,
+				 <&mmcc MDSS_PCLK0_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>;
+			power-domains = <&mmcc MDSS_GDSC>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	/* TI TPS22902 */
+	vddio_disp_vreg: regulator-vddio-disp {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio_disp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pm8226_l8>;
+		startup-delay-us = <300>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		dhob@f500000 {
+			reg = <0x0f500000 0x40000>;
+			no-map;
+		};
+
+		shob@f540000 {
+			reg = <0x0f540000 0x2000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		/* Actually <0x0fa00000 0x500000>, but first 100000 is smem */
+		reserved@fb00000 {
+			reg = <0x0fb00000 0x400000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	magnetometer@c {
+		compatible = "asahi-kasei,ak8963";
+		reg = <0xc>;
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&pm8226_l19>;
+		vid-supply = <&pm8226_lvs1>;
+		pinctrl-0 = <&mag_int_default &mag_reset_default>;
+		pinctrl-names = "default";
+	};
+
+	accelerometer@19 {
+		compatible = "st,lis3dh-accel";
+		reg = <0x19>;
+		interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l19>;
+		vddio-supply = <&pm8226_lvs1>;
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+		mount-matrix = "0", "1", "0",
+			       "1", "0", "0",
+			       "0", "0", "-1";
+		st,drdy-int-pin = <1>;
+	};
+};
+
+&blsp1_i2c3 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	regulator@3e {
+		compatible = "ti,tps65132";
+		reg = <0x3e>;
+		pinctrl-0 = <&reg_lcd_default>;
+		pinctrl-names = "default";
+
+		reg_lcd_pos: outp {
+			regulator-name = "outp";
+			regulator-min-microvolt = <5400000>;
+			regulator-max-microvolt = <5400000>;
+			regulator-active-discharge = <1>;
+			regulator-boot-on;
+			enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_lcd_neg: outn {
+			regulator-name = "outn";
+			regulator-min-microvolt = <5400000>;
+			regulator-max-microvolt = <5400000>;
+			regulator-active-discharge = <1>;
+			regulator-boot-on;
+			enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp108";
+		reg = <0x48>;
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&temp_alert_default>;
+		pinctrl-names = "default";
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&pm8226_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-boot-on;
+		};
+
+		pm8226_lvs1: lvs1 {
+			regulator-always-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <2000000>;
+	qcom,fast-charge-current-limit = <1900000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio63";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-disable;
+	};
+
+	mag_int_default: mag-int-default-state {
+		pins = "gpio66";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-disable;
+	};
+
+	mag_reset_default: mag-reset-default-state {
+		pins = "gpio62";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	reg_lcd_default: reg-lcd-default-state {
+		pins = "gpio31", "gpio33";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	reg_vddio_disp_default: reg-vddio-disp-default-state {
+		pins = "gpio34";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	temp_alert_default: temp-alert-default-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-disable;
+	};
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom/msm8926.dtsi b/arch/arm/boot/dts/qcom/msm8926.dtsi
new file mode 100644
index 000000000000..629654c525b4
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/msm8926.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Luca Weiss <luca@lucaweiss.eu>
+ */
+
+#include "qcom-msm8226.dtsi"
+
+&modem {
+	compatible = "qcom,msm8926-mss-pil";
+	/delete-property/ qcom,ext-bhs-reg;
+};
diff --git a/arch/arm/boot/dts/qcom/pm8018.dtsi b/arch/arm/boot/dts/qcom/pm8018.dtsi
new file mode 100644
index 000000000000..22f3c7bac522
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8018.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device Tree Source for Qualcomm PM8018
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+&ssbi {
+	pm8018: pmic {
+		compatible = "qcom,pm8018", "qcom,pm8921";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8018-pwrkey",
+				     "qcom,pm8921-pwrkey";
+			reg = <0x1c>;
+			interrupts-extended = <&pm8018 50 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8018 51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8018_mpps: mpps@50 {
+			compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+			reg = <0x50>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8018_mpps 0 0 6>;
+		};
+
+		rtc@11d {
+			compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+			reg = <0x11d>;
+			interrupts-extended = <&pm8018 39 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+
+		pm8018_gpio: gpio@150 {
+			compatible = "qcom,pm8058-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8018_gpio 0 0 6>;
+			#gpio-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/pm8058.dtsi b/arch/arm/boot/dts/qcom/pm8058.dtsi
new file mode 100644
index 000000000000..984b79777984
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8058.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+	pm8058: pmic {
+		compatible = "qcom,pm8058";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8058-pwrkey";
+			reg = <0x1c>;
+			interrupts-extended = <&pm8058 50 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8058 51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8058_led48: led@48 {
+			compatible = "qcom,pm8058-keypad-led";
+			reg = <0x48>;
+			status = "disabled";
+		};
+
+		vibrator@4a {
+			compatible = "qcom,pm8058-vib";
+			reg = <0x4a>;
+		};
+
+		pm8058_mpps: mpps@50 {
+			compatible = "qcom,pm8058-mpp",
+				     "qcom,ssbi-mpp";
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8058_mpps 0 0 12>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8058_led131: led@131 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x131>;
+			status = "disabled";
+		};
+
+		pm8058_led132: led@132 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x132>;
+			status = "disabled";
+		};
+
+		pm8058_led133: led@133 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x133>;
+			status = "disabled";
+		};
+
+		pm8058_keypad: keypad@148 {
+			compatible = "qcom,pm8058-keypad";
+			reg = <0x148>;
+			interrupts-extended = <&pm8058 74 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8058 75 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15>;
+			scan-delay = <32>;
+			row-hold = <91500>;
+		};
+
+		pm8058_gpio: gpio@150 {
+			compatible = "qcom,pm8058-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8058_gpio 0 0 44>;
+			#gpio-cells = <2>;
+		};
+
+		pm8058_xoadc: xoadc@197 {
+			compatible = "qcom,pm8058-adc";
+			reg = <0x197>;
+			interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#io-channel-cells = <2>;
+
+			vcoin: adc-channel@0 {
+				reg = <0x00 0x00>;
+			};
+
+			vbat: adc-channel@1 {
+				reg = <0x00 0x01>;
+			};
+
+			dcin: adc-channel@2 {
+				reg = <0x00 0x02>;
+			};
+
+			ichg: adc-channel@3 {
+				reg = <0x00 0x03>;
+			};
+
+			vph_pwr: adc-channel@4 {
+				reg = <0x00 0x04>;
+			};
+
+			usb_vbus: adc-channel@a {
+				reg = <0x00 0x0a>;
+			};
+
+			die_temp: adc-channel@b {
+				reg = <0x00 0x0b>;
+			};
+
+			ref_625mv: adc-channel@c {
+				reg = <0x00 0x0c>;
+			};
+
+			ref_1250mv: adc-channel@d {
+				reg = <0x00 0x0d>;
+			};
+
+			ref_325mv: adc-channel@e {
+				reg = <0x00 0x0e>;
+			};
+
+			ref_muxoff: adc-channel@f {
+				reg = <0x00 0x0f>;
+			};
+		};
+
+		rtc@1e8 {
+			compatible = "qcom,pm8058-rtc";
+			reg = <0x1e8>;
+			interrupts-extended = <&pm8058 39 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+	};
+};
+
+/ {
+	/*
+	 * These channels from the ADC are simply hardware monitors.
+	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
+	 * ADC.
+	 */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
+			      <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
+			      <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
+			      <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
+			      <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			      <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			      <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/pm8226.dtsi b/arch/arm/boot/dts/qcom/pm8226.dtsi
new file mode 100644
index 000000000000..2fd4f135ed84
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8226.dtsi
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: BSD-3-Clause
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8226-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8226_temp>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				crit {
+					temperature = <145000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm8226_0: pm8226@0 {
+		compatible = "qcom,pm8226", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm8226_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		smbb: charger@1000 {
+			compatible = "qcom,pm8226-charger";
+			reg = <0x1000>;
+			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "chg-done",
+					  "chg-fast",
+					  "chg-trkl",
+					  "bat-temp-ok",
+					  "bat-present",
+					  "chg-gone",
+					  "usb-valid",
+					  "dc-valid";
+
+			status = "disabled";
+
+			chg_otg: otg-vbus { };
+		};
+
+		pm8226_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8226_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8226_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@7 {
+				reg = <VADC_VSYS>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+			channel@8 {
+				reg = <VADC_DIE_TEMP>;
+				label = "die_temp";
+			};
+			channel@9 {
+				reg = <VADC_REF_625MV>;
+				label = "ref_625mv";
+			};
+			channel@a {
+				reg = <VADC_REF_1250MV>;
+				label = "ref_1250mv";
+			};
+			channel@e {
+				reg = <VADC_GND_REF>;
+			};
+			channel@f {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+
+		pm8226_iadc: adc@3600 {
+			compatible = "qcom,pm8226-iadc", "qcom,spmi-iadc";
+			reg = <0x3600>;
+			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm8226_mpps: mpps@a000 {
+			compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8226_mpps 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8226_gpios: gpio@c000 {
+			compatible = "qcom,pm8226-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8226_gpios 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8226_1: pm8226@1 {
+		compatible = "qcom,pm8226", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8226_spmi_regulators: regulators {
+			compatible = "qcom,pm8226-regulators";
+		};
+
+		pm8226_vib: vibrator@c000 {
+			compatible = "qcom,pm8916-vib";
+			reg = <0xc000>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/pm8821.dtsi b/arch/arm/boot/dts/qcom/pm8821.dtsi
new file mode 100644
index 000000000000..064e3ba54e18
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8821.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This PMIC is used on a secondary SSBI bus */
+&ssbi2 {
+	pm8821: pmic {
+		compatible = "qcom,pm8821";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8821_mpps: mpps@50 {
+			compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8821_mpps 0 0 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/pm8841.dtsi b/arch/arm/boot/dts/qcom/pm8841.dtsi
new file mode 100644
index 000000000000..3bf2ce5c86a6
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8841.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+
+/ {
+	thermal-zones {
+		pm8841-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8841_temp>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				crit {
+					temperature = <140000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+
+	pm8841_0: pm8841@4 {
+		compatible = "qcom,pm8841", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8841_mpps: mpps@a000 {
+			compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8841_mpps 0 0 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8841_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	pm8841_1: pm8841@5 {
+		compatible = "qcom,pm8841", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
new file mode 100644
index 000000000000..535cb6a2543f
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+	pm8921: pmic {
+		compatible = "qcom,pm8921";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8921-pwrkey";
+			reg = <0x1c>;
+			interrupts-extended = <&pm8921 50 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8921 51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8921_vibrator: vibrator@4a {
+			compatible = "qcom,pm8921-vib";
+			reg = <0x4a>;
+			status = "disabled";
+		};
+
+		pm8921_mpps: mpps@50 {
+			compatible = "qcom,pm8921-mpp",
+				     "qcom,ssbi-mpp";
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8921_mpps 0 0 12>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		rtc@11d {
+			compatible = "qcom,pm8921-rtc";
+			reg = <0x11d>;
+			interrupts-extended = <&pm8921 39 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+
+		pm8921_keypad: keypad@148 {
+			compatible = "qcom,pm8921-keypad";
+			reg = <0x148>;
+			interrupts-extended = <&pm8921 74 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8921 75 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15>;
+			scan-delay = <32>;
+			row-hold = <91500>;
+			status = "disabled";
+		};
+
+		pm8921_gpio: gpio@150 {
+
+			compatible = "qcom,pm8921-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8921_gpio 0 0 44>;
+			#gpio-cells = <2>;
+
+		};
+
+		pm8921_xoadc: xoadc@197 {
+			compatible = "qcom,pm8921-adc";
+			reg = <0x197>;
+			interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#io-channel-cells = <2>;
+
+			vcoin: adc-channel@0 {
+				reg = <0x00 0x00>;
+			};
+
+			vbat: adc-channel@1 {
+				reg = <0x00 0x01>;
+			};
+
+			dcin: adc-channel@2 {
+				reg = <0x00 0x02>;
+			};
+
+			vph_pwr: adc-channel@4 {
+				reg = <0x00 0x04>;
+			};
+
+			batt_therm: adc-channel@8 {
+				reg = <0x00 0x08>;
+			};
+
+			batt_id: adc-channel@9 {
+				reg = <0x00 0x09>;
+			};
+
+			usb_vbus: adc-channel@a {
+				reg = <0x00 0x0a>;
+			};
+
+			die_temp: adc-channel@b {
+				reg = <0x00 0x0b>;
+			};
+
+			ref_625mv: adc-channel@c {
+				reg = <0x00 0x0c>;
+			};
+
+			ref_1250mv: adc-channel@d {
+				reg = <0x00 0x0d>;
+			};
+
+			chg_temp: adc-channel@e {
+				reg = <0x00 0x0e>;
+			};
+
+			ref_muxoff: adc-channel@f {
+				reg = <0x00 0x0f>;
+			};
+		};
+	};
+};
+
+/ {
+	/*
+	 * These channels from the ADC are simply hardware monitors.
+	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
+	 * ADC.
+	 */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */
+			      <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */
+			      <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */
+			      <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */
+			      <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			      <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			      <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/pm8941.dtsi b/arch/arm/boot/dts/qcom/pm8941.dtsi
new file mode 100644
index 000000000000..aca0052a02b7
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8941.dtsi
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+
+/ {
+	thermal-zones {
+		pm8941-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8941_temp>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				crit {
+					temperature = <145000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+
+	pm8941_0: pm8941@0 {
+		compatible = "qcom,pm8941", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>,
+			      <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pon@800 {
+			compatible = "qcom,pm8941-pon";
+			reg = <0x800>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+			};
+
+			pm8941_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		usb_id: usb-detect@900 {
+			compatible = "qcom,pm8941-misc";
+			reg = <0x900>;
+			interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "usb_id";
+		};
+
+		smbb: charger@1000 {
+			compatible = "qcom,pm8941-charger";
+			reg = <0x1000>;
+			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "chg-done",
+					  "chg-fast",
+					  "chg-trkl",
+					  "bat-temp-ok",
+					  "bat-present",
+					  "chg-gone",
+					  "usb-valid",
+					  "dc-valid";
+
+			usb-otg-in-supply = <&pm8941_5vs1>;
+
+			status = "disabled";
+
+			chg_otg: otg-vbus { };
+		};
+
+		pm8941_gpios: gpio@c000 {
+			compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8941_gpios 0 0 36>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			boost_bypass_n_pin: boost-bypass-state {
+				pins = "gpio21";
+				function = "normal";
+			};
+		};
+
+		pm8941_mpps: mpps@a000 {
+			compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8941_mpps 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8941_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8941_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+
+			channel@6 {
+				reg = <VADC_VBAT_SNS>;
+			};
+
+			channel@8 {
+				reg = <VADC_DIE_TEMP>;
+			};
+
+			channel@9 {
+				reg = <VADC_REF_625MV>;
+			};
+
+			channel@a {
+				reg = <VADC_REF_1250MV>;
+			};
+
+			channel@e {
+				reg = <VADC_GND_REF>;
+			};
+
+			channel@f {
+				reg = <VADC_VDD_VADC>;
+			};
+
+			channel@30 {
+				reg = <VADC_LR_MUX1_BAT_THERM>;
+			};
+		};
+
+		pm8941_iadc: adc@3600 {
+			compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
+			reg = <0x3600>;
+			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+			qcom,external-resistor-micro-ohms = <10000>;
+		};
+
+		pm8941_coincell: charger@2800 {
+			compatible = "qcom,pm8941-coincell";
+			reg = <0x2800>;
+			status = "disabled";
+		};
+	};
+
+	pm8941_1: pm8941@1 {
+		compatible = "qcom,pm8941", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8941_lpg: pwm {
+			compatible = "qcom,pm8941-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
+		pm8941_vib: vibrator@c000 {
+			compatible = "qcom,pm8916-vib";
+			reg = <0xc000>;
+			status = "disabled";
+		};
+
+		pm8941_wled: wled@d800 {
+			compatible = "qcom,pm8941-wled";
+			reg = <0xd800>;
+			label = "backlight";
+
+			status = "disabled";
+		};
+
+		regulators {
+			compatible = "qcom,pm8941-regulators";
+			interrupts = <0x1 0x83 0x2 0>, <0x1 0x84 0x2 0>;
+			interrupt-names = "ocp-5vs1", "ocp-5vs2";
+			vin_5vs-supply = <&pm8941_5v>;
+
+			pm8941_5v: s4 {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-enable-ramp-delay = <500>;
+			};
+
+			pm8941_5vs1: 5vs1 {
+				regulator-enable-ramp-delay = <1000>;
+				regulator-pull-down;
+				regulator-over-current-protection;
+				qcom,ocp-max-retries = <10>;
+				qcom,ocp-retry-delay = <30>;
+				qcom,vs-soft-start-strength = <0>;
+				regulator-initial-mode = <1>;
+			};
+
+			pm8941_5vs2: 5vs2 {
+				regulator-enable-ramp-delay = <1000>;
+				regulator-pull-down;
+				regulator-over-current-protection;
+				qcom,ocp-max-retries = <10>;
+				qcom,ocp-retry-delay = <30>;
+				qcom,vs-soft-start-strength = <0>;
+				regulator-initial-mode = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/pma8084.dtsi b/arch/arm/boot/dts/qcom/pma8084.dtsi
new file mode 100644
index 000000000000..309f5256754b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pma8084.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pma8084_0: pma8084@0 {
+		compatible = "qcom,pma8084", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>,
+			      <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pon@800 {
+			compatible = "qcom,pm8941-pon";
+			reg = <0x800>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+		};
+
+		pma8084_gpios: gpio@c000 {
+			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pma8084_gpios 0 0 22>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pma8084_mpps: mpps@a000 {
+			compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pma8084_mpps 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pma8084_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
+			io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+		};
+
+		pma8084_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@8 {
+				reg = <VADC_DIE_TEMP>;
+			};
+
+			channel@9 {
+				reg = <VADC_REF_625MV>;
+			};
+
+			channel@a {
+				reg = <VADC_REF_1250MV>;
+			};
+
+			channel@c {
+				reg = <VADC_SPARE1>;
+			};
+
+			channel@e {
+				reg = <VADC_GND_REF>;
+			};
+
+			channel@f {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+	};
+
+	pma8084_1: pma8084@1 {
+		compatible = "qcom,pma8084", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/pmx55.dtsi b/arch/arm/boot/dts/qcom/pmx55.dtsi
new file mode 100644
index 000000000000..da0851173c69
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pmx55.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020, Linaro Limited
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@8 {
+		compatible = "qcom,pmx55", "qcom,spmi-pmic";
+		reg = <0x8 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+
+			status = "disabled";
+		};
+
+		pmx55_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x8 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pmx55_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmx55_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x8 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@9 {
+				reg = <ADC5_CHG_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "chg_temp";
+			};
+		};
+
+		pmx55_gpios: gpio@c000 {
+			compatible = "qcom,pmx55-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmx55_gpios 0 0 11>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@9 {
+		compatible = "qcom,pmx55", "qcom,spmi-pmic";
+		reg = <0x9 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/pmx65.dtsi b/arch/arm/boot/dts/qcom/pmx65.dtsi
new file mode 100644
index 000000000000..1c7fdf59c1f5
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pmx65.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@1 {
+		compatible = "qcom,pmx65", "qcom,spmi-pmic";
+		reg = <1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmx65_temp: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmx65_gpios: gpio@8800 {
+			compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmx65_gpios 0 0 16>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8016-sbc.dts b/arch/arm/boot/dts/qcom/qcom-apq8016-sbc.dts
index 4ccd2dca74a2..4ccd2dca74a2 100644
--- a/arch/arm/boot/dts/qcom-apq8016-sbc.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8016-sbc.dts
diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
index ace8cea27949..a2ca456012f1 100644
--- a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
@@ -6,7 +6,9 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &adsp_region;
 
 / {
 	model = "ASUS ZenWatch 2";
@@ -57,6 +59,10 @@
 	};
 };
 
+&adsp {
+	status = "okay";
+};
+
 &blsp1_uart1 {
 	status = "okay";
 
@@ -81,7 +87,7 @@
 };
 
 &rpm_requests {
-	pm8226-regulators {
+	regulators {
 		compatible = "qcom,rpm-pm8226-regulators";
 
 		pm8226_s3: s3 {
@@ -247,6 +253,8 @@
 	qcom,fast-charge-high-threshold-voltage = <4400000>;
 	qcom,auto-recharge-threshold-voltage = <4300000>;
 	qcom,minimum-input-voltage = <4400000>;
+
+	status = "okay";
 };
 
 &tlmm {
@@ -262,7 +270,6 @@
 		function = "gpio";
 		drive-strength = <8>;
 		bias-disable;
-		input-enable;
 	};
 
 	wlan_hostwake_default_state: wlan-hostwake-default-state {
@@ -270,7 +277,6 @@
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	wlan_regulator_default_state: wlan-regulator-default-state {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
new file mode 100644
index 000000000000..ac228965a485
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+#include <dt-bindings/input/ti-drv260x.h>
+
+/delete-node/ &adsp_region;
+
+/ {
+	model = "Huawei Watch";
+	compatible = "huawei,sturgeon", "qcom,apq8026";
+	chassis-type = "watch";
+	qcom,msm-id = <199 0x20000>;
+	qcom,board-id = <8 4>;
+
+	reserved-memory {
+		sbl_region: sbl@2f00000 {
+			reg = <0x02f00000 0x100000>;
+			no-map;
+		};
+
+		external_image_region: external-image@3100000 {
+			reg = <0x3100000 0x200000>;
+			no-map;
+		};
+
+		peripheral_region: peripheral@3300000 {
+			reg = <0x3300000 0x600000>;
+			no-map;
+		};
+
+		adsp_region: adsp@3900000 {
+			reg = <0x3900000 0x1400000>;
+			no-map;
+		};
+
+		modem_region: modem@4d00000 {
+			reg = <0x4d00000 0x1b00000>;
+			no-map;
+		};
+
+		modem_efs_region: modem-efs@7f00000 {
+			reg = <0x7f00000 0x100000>;
+			no-map;
+		};
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_default_state>;
+	};
+};
+
+&adsp {
+	status = "okay";
+};
+
+&blsp1_i2c2 {
+	clock-frequency = <384000>;
+
+	status = "okay";
+
+	vibrator@5a {
+		compatible = "ti,drv2605";
+		reg = <0x5a>;
+		enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+
+		mode = <DRV260X_ERM_MODE>;
+		library-sel = <DRV260X_ERM_LIB_D>;
+		vib-rated-mv = <2765>;
+		vib-overdrive-mv = <3525>;
+
+		pinctrl-0 = <&vibrator_default_state>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp1_i2c5 {
+	clock-frequency = <384000>;
+
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l19>;
+		vio-supply = <&pm8226_lvs1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_default_state>;
+
+		syna,startup-delay-ms = <160>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&blsp1_uart4_default_state>;
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43430a0-bt";
+		max-speed = <3000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bluetooth_default_state>;
+
+		host-wakeup-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_3 {
+	max-frequency = <100000000>;
+	non-removable;
+
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_hostwake_default_state>;
+	};
+};
+
+&smbb {
+	qcom,fast-charge-safe-voltage = <4370000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,minimum-input-voltage = <4350000>;
+	qcom,fast-charge-current-limit = <300000>;
+	qcom,fast-charge-safe-current = <600000>;
+	qcom,auto-recharge-threshold-voltage = <4240000>;
+
+	status = "okay";
+};
+
+&tlmm {
+	blsp1_uart4_default_state: blsp1-uart4-default-state {
+		pins = "gpio12", "gpio13", "gpio14", "gpio15";
+		function = "blsp_uart4";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	bluetooth_default_state: bluetooth-default-state {
+		pins = "gpio63", "gpio64";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	touch_default_state: touch-default-state {
+		irq-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		reset-pins {
+			pins = "gpio16";
+			function = "gpio";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	vibrator_default_state: vibrator-default-state {
+		pins = "gpio59", "gpio60";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	wlan_hostwake_default_state: wlan-hostwake-default-state {
+		pins = "gpio66";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wlan_regulator_default_state: wlan-regulator-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
index 2b7e52fda6a7..a70de21bf139 100644
--- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
@@ -6,11 +6,15 @@
 /dts-v1/;
 
 #include "qcom-msm8226.dtsi"
-#include "qcom-pm8226.dtsi"
+#include "pm8226.dtsi"
+#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
+
+/delete-node/ &adsp_region;
 
 / {
 	model = "LG G Watch R";
 	compatible = "lg,lenok", "qcom,apq8026";
+	chassis-type = "watch";
 	qcom,board-id = <132 0x0a>;
 	qcom,msm-id = <199 0x20000>;
 
@@ -23,6 +27,23 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	reserved-memory {
+		sbl_region: sbl@2f00000 {
+			reg = <0x02f00000 0x100000>;
+			no-map;
+		};
+
+		external_image_region: external-image@3100000 {
+			reg = <0x03100000 0x200000>;
+			no-map;
+		};
+
+		adsp_region: adsp@3300000 {
+			reg = <0x03300000 0x1400000>;
+			no-map;
+		};
+	};
+
 	vreg_wlan: wlan-regulator {
 		compatible = "regulator-fixed";
 
@@ -36,6 +57,33 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&wlan_regulator_default_state>;
 	};
+
+	pwm_vibrator: pwm {
+		compatible = "clk-pwm";
+		clocks = <&mmcc CAMSS_GP0_CLK>;
+
+		pinctrl-0 = <&vibrator_clk_default_state>;
+		pinctrl-names = "default";
+
+		#pwm-cells = <2>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+
+		pwms = <&pwm_vibrator 0 10000>;
+		pwm-names = "enable";
+
+		vcc-supply = <&pm8226_l28>;
+		enable-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&vibrator_en_default_state>;
+		pinctrl-names = "default";
+	};
+};
+
+&adsp {
+	status = "okay";
 };
 
 &blsp1_i2c1 {
@@ -102,7 +150,7 @@
 };
 
 &rpm_requests {
-	pm8226-regulators {
+	regulators {
 		compatible = "qcom,rpm-pm8226-regulators";
 
 		pm8226_s3: s3 {
@@ -268,6 +316,8 @@
 	qcom,fast-charge-high-threshold-voltage = <4350000>;
 	qcom,auto-recharge-threshold-voltage = <4240000>;
 	qcom,minimum-input-voltage = <4450000>;
+
+	status = "okay";
 };
 
 &tlmm {
@@ -283,20 +333,18 @@
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
-	touch_pins: touch {
-		irq {
+	touch_pins: touch-state {
+		irq-pins {
 			pins = "gpio17";
 			function = "gpio";
 
 			drive-strength = <8>;
 			bias-pull-down;
-			input-enable;
 		};
 
-		reset {
+		reset-pins {
 			pins = "gpio16";
 			function = "gpio";
 
@@ -306,12 +354,25 @@
 		};
 	};
 
+	vibrator_clk_default_state: vibrator-clk-default-state {
+		pins = "gpio33";
+		function = "gp0_clk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	vibrator_en_default_state: vibrator-en-default-state {
+		pins = "gpio62";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	wlan_hostwake_default_state: wlan-hostwake-default-state {
 		pins = "gpio37";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	wlan_regulator_default_state: wlan-regulator-default-state {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
new file mode 100644
index 000000000000..4546fa8beba4
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "qcom-msm8226-samsung-matisse-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab 4 10.1";
+	compatible = "samsung,matisse-wifi", "qcom,apq8026";
+	chassis-type = "tablet";
+
+	reg_tsp_3p3v: regulator-tsp-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en1_default_state>;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2hh12";
+		reg = <0x1d>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int_default_state>;
+
+		st,drdy-int-pin = <1>;
+
+		vdd-supply = <&pm8226_l19>;
+		vddio-supply = <&pm8226_lvs1>;
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+		linux,keycodes = <KEY_RESERVED>,
+				 <KEY_RESERVED>,
+				 <KEY_RESERVED>,
+				 <KEY_RESERVED>,
+				 <KEY_APPSELECT>,
+				 <KEY_BACK>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_int_rst_default_state>;
+
+		reset-gpios = <&pm8226_gpios 6 GPIO_ACTIVE_LOW>;
+
+		vdd-supply = <&reg_tsp_1p8v>;
+		vdda-supply = <&reg_tsp_3p3v>;
+	};
+};
+
+&pm8226_l3 {
+	regulator-max-microvolt = <1337500>;
+};
+
+&pm8226_s4 {
+	regulator-max-microvolt = <1800000>;
+};
+
+&tlmm {
+	tsp_en1_default_state: tsp-en1-default-state {
+		pins = "gpio73";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
new file mode 100644
index 000000000000..a8543ca7b556
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
@@ -0,0 +1,575 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
+ * Copyright (c) 2023, Bryant Mairs <bryant@mai.rs>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/power/summit,smb347-charger.h>
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &mba_region;
+/delete-node/ &mpss_region;
+/delete-node/ &smem_region;
+
+/ {
+	model = "Samsung Galaxy Tab 4 8.0 Wi-Fi";
+	compatible = "samsung,milletwifi", "qcom,apq8026";
+	chassis-type = "tablet";
+
+	aliases {
+		display0 = &framebuffer0;
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = "display0";
+
+		framebuffer0: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <800>;
+			height = <1280>;
+			stride = <(800 * 3)>;
+			format = "r8g8b8";
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Cover";
+			gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-home {
+			label = "Home";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	i2c-backlight {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&backlight_i2c_default_state>;
+		pinctrl-names = "default";
+
+		i2c-gpio,delay-us = <4>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		backlight@2c {
+			compatible = "ti,lp8556";
+			reg = <0x2c>;
+			enable-supply = <&reg_backlight_vddio>;
+
+			dev-ctrl = /bits/ 8 <0x80>;
+			init-brt = /bits/ 8 <0x3f>;
+
+			/*
+			 * Change transition duration: 200ms, Change
+			 * transition strength: heavy, PWM hysteresis:
+			 * 1-bit w/ 8-bit resolution
+			 */
+			rom-a3h {
+				rom-addr = /bits/ 8 <0xa3>;
+				rom-val = /bits/ 8 <0x5e>;
+			};
+
+			/*
+			 * PWM phase configuration: 3-phase/3 drivers
+			 * (0, 120deg, 240deg, -, -, -),
+			 * PWM frequency: 9616Hz (10-bit)
+			 */
+			rom-a5h {
+				rom-addr = /bits/ 8 <0xa5>;
+				rom-val = /bits/ 8 <0x34>;
+			};
+
+			/*
+			 * Enable LED drivers 2 & 3, Boot inductor
+			 * current limit: 1.5A/2.6A
+			 */
+			rom-a7h {
+				rom-addr = /bits/ 8 <0xa7>;
+				rom-val = /bits/ 8 <0xfa>;
+			};
+		};
+	};
+
+	reg_backlight_vddio: regulator-backlight-vddio {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight_vddio";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&backlight_vddio_default_state>;
+		pinctrl-names = "default";
+	};
+
+	reg_tsp_1p8v: regulator-tsp-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_1p8v";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tsp_en1_default_state>;
+		pinctrl-names = "default";
+	};
+
+	reg_tsp_3p3v: regulator-tsp-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tsp_en_default_state>;
+		pinctrl-names = "default";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8400000 {
+			reg = <0x08400000 0x1f00000>;
+			no-map;
+		};
+
+		mba_region: mba@a300000 {
+			reg = <0x0a300000 0x100000>;
+			no-map;
+		};
+
+		reserved@cb00000 {
+			reg = <0x0cb00000 0x700000>;
+			no-map;
+		};
+
+		wcnss_region: wcnss@d200000 {
+			reg = <0x0d200000 0x700000>;
+			no-map;
+		};
+
+		adsp_region: adsp@d900000 {
+			reg = <0x0d900000 0x1800000>;
+			no-map;
+		};
+
+		venus@f100000 {
+			reg = <0x0f100000 0x500000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		reserved@fb00000 {
+			reg = <0x0fb00000 0x260000>;
+			no-map;
+		};
+
+		rfsa@fd60000 {
+			reg = <0x0fd60000 0x20000>;
+			no-map;
+		};
+
+		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0fd80000 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2hh12";
+		reg = <0x1d>;
+
+		interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
+
+		pinctrl-0 = <&accel_int_default_state>;
+		pinctrl-names = "default";
+
+		vdd-supply = <&pm8226_l19>;
+		vddio-supply = <&pm8226_lvs1>;
+
+		mount-matrix = "0", "1", "0",
+			       "-1", "0", "0",
+			       "0", "0", "1";
+
+		st,drdy-int-pin = <1>;
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	charger@6a {
+		compatible = "summit,smb358";
+		reg = <0x6a>;
+
+		interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&charger_int_default_state>;
+		pinctrl-names = "default";
+
+		summit,enable-usb-charging;
+		summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
+		summit,fast-voltage-threshold-microvolt = <3000000>;
+		summit,chip-temperature-threshold-celsius = <130>;
+		summit,usb-current-limit-microamp = <1500000>;
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	muic: usb-switch@25 {
+		compatible = "siliconmitus,sm5502-muic";
+		reg = <0x25>;
+
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&muic_int_default_state>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "melfas,mms252", "melfas,mms114";
+		reg = <0x48>;
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <1280>;
+		avdd-supply = <&reg_tsp_3p3v>;
+		vdd-supply = <&reg_tsp_1p8v>;
+		linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+
+		pinctrl-0 = <&tsp_int_rst_default_state>;
+		pinctrl-names = "default";
+	};
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+			regulator-always-on;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&sdhc2_default_state>, <&sdc2_cd_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default_state: accel-int-default-state {
+		pins = "gpio54";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	backlight_i2c_default_state: backlight-i2c-default-state {
+		pins = "gpio20", "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	backlight_vddio_default_state: backlight-vddio-default-state {
+		pins = "gpio74";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	charger_int_default_state: charger-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	muic_int_default_state: muic-int-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default_state: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default_state: tsp-en-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en1_default_state: tsp-en1-default-state {
+		pins = "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_rst_default_state: tsp-int-rst-default-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <10>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
new file mode 100644
index 000000000000..009afd8212c2
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -0,0 +1,1024 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+#include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
+
+/ {
+	model = "Qualcomm APQ8060 Dragonboard";
+	compatible = "qcom,apq8060-dragonboard", "qcom,msm8660";
+
+	aliases {
+		serial0 = &gsbi12_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* Main power of the board: 3.7V */
+	vph: regulator-fixed {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-name = "VPH";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* GPIO controlled ethernet power regulator */
+	dragon_veth: xc622a331mrg {
+		compatible = "regulator-fixed";
+		regulator-name = "XC6222A331MR-G";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vph>;
+		gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_veth_gpios>;
+		regulator-always-on;
+	};
+
+	/* VDDvario fixed regulator */
+	dragon_vario: nds332p {
+		compatible = "regulator-fixed";
+		regulator-name = "NDS332P";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&pm8058_s3>;
+	};
+
+	/* This is a levelshifter for SDCC5 */
+	dragon_vio_txb: txb0104rgyr {
+		compatible = "regulator-fixed";
+		regulator-name = "Dragon SDCC levelshifter";
+		vin-supply = <&pm8058_l14>;
+		regulator-always-on;
+	};
+
+	/*
+	 * Capella CM3605 light and proximity sensor mounted directly
+	 * on the sensor board.
+	 */
+	cm3605 {
+		compatible = "capella,cm3605";
+		vdd-supply = <&pm8058_l14>; // 2.85V
+		aset-gpios = <&pm8058_gpio 35 GPIO_ACTIVE_LOW>;
+		capella,aset-resistance-ohms = <100000>;
+		/* Trig on both edges - getting close or far away */
+		interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
+		/* MPP05 analog input to the XOADC */
+		io-channels = <&pm8058_xoadc 0x00 0x05>;
+		io-channel-names = "aout";
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
+	};
+};
+
+&ebi2 {
+	/* The EBI2 will instantiate first, then populate its children */
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_ebi2_pins>;
+	status = "okay";
+
+	/*
+	 * An on-board SMSC LAN9221 chip for "debug ethernet",
+	 * which is actually just an ordinary ethernet on the
+	 * EBI2. This has a 25MHz chrystal next to it, so no
+	 * clocking is needed.
+	 */
+	ethernet@2,0 {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		reg = <2 0x0 0x100>;
+		/*
+		 * The second interrupt is the PME interrupt
+		 * for network wakeup, connected to the TLMM.
+		 */
+		interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
+				    <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
+		vdd33a-supply = <&dragon_veth>;
+		vddvario-supply = <&dragon_vario>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_ethernet_gpios>;
+		phy-mode = "mii";
+		reg-io-width = <2>;
+		smsc,force-external-phy;
+		smsc,irq-push-pull;
+
+		/*
+		 * SLOW chipselect config
+		 * Delay 9 cycles (140ns@64MHz) between SMSC
+		 * LAN9221 Ethernet controller reads and writes
+		 * on CS2.
+		 */
+		qcom,xmem-recovery-cycles = <0>;
+		qcom,xmem-write-hold-cycles = <3>;
+		qcom,xmem-write-delta-cycles = <31>;
+		qcom,xmem-read-delta-cycles = <28>;
+		qcom,xmem-write-wait-cycles = <9>;
+		qcom,xmem-read-wait-cycles = <9>;
+	};
+};
+
+&gsbi3 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi3_i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi3_i2c_pins>;
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,cy8ctma340";
+		reg = <0x24>;
+		/* Certainly we can do at least 400 kHz */
+		clock-frequency = <400000>;
+		/* IRQ on GPIO61 called /CTP_INT */
+		interrupt-parent = <&tlmm>;
+		interrupts = <61 IRQ_TYPE_EDGE_FALLING>;
+		/*
+		 * The I2C bus is using a PCA9306 level translator from L16A
+		 * to L2B so these two voltages are needed and L16A is
+		 * kind of the IO voltage, however L16Aisn't really fed to
+		 * the TMA340, which relies entirely on L2B (PM8901 L2).
+		 */
+		vcpin-supply = <&pm8058_l16>;
+		vdd-supply = <&pm8901_l2>;
+		/* GPIO58, called WAKE_CTP */
+		reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <800>;
+		active-interval-ms = <0>;
+		touch-timeout-ms = <255>;
+		lowpower-interval-ms = <10>;
+		bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_tma340_gpios>;
+	};
+};
+
+&gsbi8 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi8_i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi8_i2c_pins>;
+	status = "okay";
+
+	eeprom@52 {
+		/* A 16KiB Platform ID EEPROM on the CPU carrier board */
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		vcc-supply = <&pm8058_s3>;
+		pagesize = <64>;
+	};
+	wm8903: wm8903@1a {
+		/* This Woolfson Micro device has an unrouted interrupt line */
+		compatible = "wlf,wm8903";
+		reg = <0x1a>;
+
+		AVDD-supply = <&pm8058_l16>;
+		CPVDD-supply = <&pm8058_l16>;
+		DBVDD-supply = <&pm8058_s3>;
+		DCVDD-supply = <&pm8058_l0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		micdet-cfg = <0>;
+		micdet-delay = <100>;
+		gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+	};
+};
+
+&gsbi12 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi12_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi12_serial_pins>;
+	status = "okay";
+};
+
+&gsbi12_i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
+	status = "okay";
+
+	ak8975@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+		interrupt-parent = <&pm8058_gpio>;
+		interrupts = <33 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_ak8975_gpios>;
+		vid-supply = <&pm8058_lvs0>; // 1.8V
+		vdd-supply = <&pm8058_l14>; // 2.85V
+	};
+	bmp085@77 {
+		compatible = "bosch,bmp085";
+		reg = <0x77>;
+		interrupt-parent = <&pm8058_gpio>;
+		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_bmp085_gpios>;
+		vddd-supply = <&pm8058_lvs0>; // 1.8V
+		vdda-supply = <&pm8058_l14>; // 2.85V
+	};
+	mpu3050@68 {
+		compatible = "invensense,mpu3050";
+		reg = <0x68>;
+		/*
+		 * GPIO17 is pulled high by a 10k
+		 * resistor to VLOGIC so needs to be
+		 * active low/falling edge.
+		 */
+		interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_mpu3050_gpios>;
+		vlogic-supply = <&pm8058_lvs0>; // 1.8V
+		vdd-supply = <&pm8058_l14>; // 2.85V
+
+		/*
+		 * The MPU-3050 acts as a hub for the
+		 * accelerometer.
+		 */
+		i2c-gate {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			kxsd9@18 {
+				compatible = "kionix,kxsd9";
+				reg = <0x18>;
+				interrupt-parent = <&tlmm>;
+				interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_kxsd9_gpios>;
+				iovdd-supply = <&pm8058_lvs0>; // 1.8V
+				vdd-supply = <&pm8058_l14>; // 2.85V
+			};
+		};
+	};
+};
+
+&pm8058 {
+	interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8058_gpio {
+	dragon_ethernet_gpios: ethernet-state {
+		pinconf {
+			pins = "gpio7";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_bmp085_gpios: bmp085-state {
+		pinconf {
+			pins = "gpio16";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_mpu3050_gpios: mpu3050-state {
+		pinconf {
+			pins = "gpio17";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_sdcc3_gpios: sdcc3-state {
+		pinconf {
+			pins = "gpio22";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_sdcc5_gpios: sdcc5-state {
+		pinconf {
+			pins = "gpio26";
+			function = "normal";
+			input-enable;
+			bias-pull-up;
+			qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_ak8975_gpios: ak8975-state {
+		pinconf {
+			pins = "gpio33";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_cm3605_gpios: cm3605-state {
+		/* Pin 34 connected to the proxy IRQ */
+		gpio34-pins {
+			pins = "gpio34";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+		/* Pin 35 connected to ASET */
+		gpio35-pins {
+			pins = "gpio35";
+			function = "normal";
+			output-high;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_veth_gpios: veth-state {
+		pinconf {
+			pins = "gpio40";
+			function = "normal";
+			bias-disable;
+			drive-push-pull;
+		};
+	};
+};
+
+&pm8058_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_MENU)
+		MATRIX_KEY(0, 2, KEY_1)
+		MATRIX_KEY(0, 3, KEY_4)
+		MATRIX_KEY(0, 4, KEY_7)
+		MATRIX_KEY(1, 0, KEY_UP)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+		MATRIX_KEY(1, 2, KEY_DOWN)
+		MATRIX_KEY(1, 3, KEY_5)
+		MATRIX_KEY(1, 3, KEY_8)
+		MATRIX_KEY(2, 0, KEY_HOME)
+		MATRIX_KEY(2, 1, KEY_REPLY)
+		MATRIX_KEY(2, 2, KEY_2)
+		MATRIX_KEY(2, 3, KEY_6)
+		MATRIX_KEY(3, 0, KEY_VOLUMEUP)
+		MATRIX_KEY(3, 1, KEY_RIGHT)
+		MATRIX_KEY(3, 2, KEY_3)
+		MATRIX_KEY(3, 3, KEY_9)
+		MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE)
+		MATRIX_KEY(4, 0, KEY_VOLUMEDOWN)
+		MATRIX_KEY(4, 1, KEY_BACK)
+		MATRIX_KEY(4, 2, KEY_CAMERA)
+		MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
+	>;
+	keypad,num-rows = <6>;
+	keypad,num-columns = <5>;
+};
+
+&pm8058_led48 {
+	/*
+	 * The keypad LED @0x48 is routed to
+	 * the sensor board where it is
+	 * connected to an infrared LED
+	 * SFH4650 (60mW, @850nm) next to the
+	 * ambient light and proximity sensor
+	 * Capella Microsystems CM3605.
+	 */
+	label = "pm8058:infrared:proximitysensor";
+	default-state = "off";
+	linux,default-trigger = "cm3605";
+	status = "okay";
+};
+
+&pm8058_led131 {
+	label = "pm8058:red";
+	color = <LED_COLOR_ID_RED>;
+	default-state = "off";
+	status = "okay";
+};
+
+&pm8058_led132 {
+	/*
+	 * This is actually green too on my
+	 * board, but documented as yellow.
+	 */
+	label = "pm8058:yellow";
+	color = <LED_COLOR_ID_YELLOW>;
+	default-state = "off";
+	linux,default-trigger = "mmc0";
+	status = "okay";
+};
+
+&pm8058_led133 {
+	label = "pm8058:green";
+	function = LED_FUNCTION_HEARTBEAT;
+	color = <LED_COLOR_ID_GREEN>;
+	default-state = "on";
+	linux,default-trigger = "heartbeat";
+	status = "okay";
+};
+
+&pm8058_mpps {
+	dragon_cm3605_mpps: cm3605-mpps-state {
+		pins = "mpp5";
+		function = "analog";
+		input-enable;
+		bias-high-impedance;
+		/* Let's use channel 5 */
+		qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
+		power-source = <PM8058_GPIO_S3>;
+	};
+};
+
+&rpm {
+	/*
+	 * Set up of the PMIC RPM regulators for this board
+	 * PM8901 supplies "preliminary regulators" whatever
+	 * that means
+	 */
+	regulators-0 {
+		compatible = "qcom,rpm-pm8901-regulators";
+
+		vdd_l0-supply = <&pm8901_s4>;
+		vdd_l1-supply = <&vph>;
+		vdd_l2-supply = <&vph>;
+		vdd_l3-supply = <&vph>;
+		vdd_l4-supply = <&vph>;
+		vdd_l5-supply = <&vph>;
+		vdd_l6-supply = <&vph>;
+		/* vdd_s0-supply, vdd_s1-supply: SAW regulators */
+		vdd_s2-supply = <&vph>;
+		vdd_s3-supply = <&vph>;
+		vdd_s4-supply = <&vph>;
+		lvs0_in-supply = <&pm8058_s3>;
+		lvs1_in-supply = <&pm8901_s4>;
+		lvs2_in-supply = <&pm8058_l0>;
+		lvs3_in-supply = <&pm8058_s2>;
+		mvs_in-supply = <&pm8058_s3>;
+
+		pm8901_l0: l0 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8901_l1: l1 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		pm8901_l2: l2 {
+			/* TMA340 requires strictly 3.3V */
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		pm8901_l3: l3 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		pm8901_l4: l4 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+
+		pm8901_l5: l5 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8901_l6: l6 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			bias-pull-down;
+		};
+
+		/* s0 and s1 are SAW regulators controlled over SPM */
+		pm8901_s2: s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		pm8901_s3: s3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		pm8901_s4: s4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* LVS0 thru 3 and mvs are just switches */
+		pm8901_lvs0: lvs0 {
+			regulator-always-on;
+		};
+
+		pm8901_lvs1: lvs1 { };
+
+		pm8901_lvs2: lvs2 { };
+
+		pm8901_lvs3: lvs3 { };
+
+		pm8901_mvs: mvs { };
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8058-regulators";
+
+		vdd_l0_l1_lvs-supply = <&pm8058_s3>;
+		vdd_l2_l11_l12-supply = <&vph>;
+		vdd_l3_l4_l5-supply = <&vph>;
+		vdd_l6_l7-supply = <&vph>;
+		vdd_l8-supply = <&vph>;
+		vdd_l9-supply = <&vph>;
+		vdd_l10-supply = <&vph>;
+		vdd_l13_l16-supply = <&pm8058_s4>;
+		vdd_l14_l15-supply = <&vph>;
+		vdd_l17_l18-supply = <&vph>;
+		vdd_l19_l20-supply = <&vph>;
+		vdd_l21-supply = <&pm8058_s3>;
+		vdd_l22-supply = <&pm8058_s3>;
+		vdd_l23_l24_l25-supply = <&pm8058_s3>;
+		vdd_s0-supply = <&vph>;
+		vdd_s1-supply = <&vph>;
+		vdd_s2-supply = <&vph>;
+		vdd_s3-supply = <&vph>;
+		vdd_s4-supply = <&vph>;
+		vdd_ncp-supply = <&vph>;
+
+		pm8058_l0: l0 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8058_l1: l1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8058_l2: l2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+
+		pm8058_l3: l3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8058_l4: l4 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8058_l5: l5 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8058_l6: l6 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3600000>;
+			bias-pull-down;
+		};
+
+		pm8058_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8058_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <3050000>;
+			bias-pull-down;
+		};
+
+		pm8058_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8058_l10: l10 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+
+		pm8058_l11: l11 {
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			bias-pull-down;
+		};
+
+		pm8058_l12: l12 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			bias-pull-down;
+		};
+
+		pm8058_l13: l13 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+			bias-pull-down;
+		};
+
+		pm8058_l14: l14 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8058_l15: l15 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8058_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+			regulator-always-on;
+		};
+
+		pm8058_l17: l17 {
+			// 1.5V according to schematic
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+
+		pm8058_l18: l18 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			bias-pull-down;
+		};
+
+		pm8058_l19: l19 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			bias-pull-down;
+		};
+
+		pm8058_l20: l20 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8058_l21: l21 {
+			// 1.1 V according to schematic
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+			regulator-always-on;
+		};
+
+		pm8058_l22: l22 {
+			// 1.2 V according to schematic
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8058_l23: l23 {
+			// Unused
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8058_l24: l24 {
+			// Unused
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8058_l25: l25 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8058_s0: s0 {
+			// regulator-min-microvolt = <500000>;
+			// regulator-max-microvolt = <1325000>;
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8058_s1: s1 {
+			// regulator-min-microvolt = <500000>;
+			// regulator-max-microvolt = <1250000>;
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8058_s2: s2 {
+			// 1.3 V according to schematic
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1400000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8058_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			regulator-always-on;
+			bias-pull-down;
+		};
+
+		pm8058_s4: s4 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+			regulator-always-on;
+			bias-pull-down;
+		};
+
+		/* LVS0 and LVS1 are just switches */
+		pm8058_lvs0: lvs0 {
+			bias-pull-down;
+		};
+
+		pm8058_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		pm8058_ncp: ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
+
+/* Internal 3.69 GiB eMMC */
+&sdcc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_sdcc1_pins>;
+	vmmc-supply = <&pm8901_l5>;
+	vqmmc-supply = <&pm8901_lvs0>;
+	status = "okay";
+};
+
+/* External micro SD card, directly connected, pulled up to 2.85 V */
+&sdcc3 {
+	/* Enable SSBI GPIO 22 as input, use for card detect */
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>;
+	cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8058_l14>;
+	status = "okay";
+};
+
+/*
+ * Second external micro SD card, using two TXB104RGYR levelshifters
+ * to lift from 1.8 V to 2.85 V
+ */
+&sdcc5 {
+	/* Enable SSBI GPIO 26 as input, use for card detect */
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>;
+	cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8058_l14>;
+	vqmmc-supply = <&dragon_vio_txb>;
+	status = "okay";
+};
+
+&tlmm {
+	/* eMMC pins, all 8 data lines connected */
+	dragon_sdcc1_pins: sdcc1-state {
+		clk-pins {
+			pins = "gpio167"; /* SDC1 CLK */
+			function = "sdc1";
+			drive-strength = <16>;
+			bias-disable;
+		};
+		cmd-pins {
+			pins = "gpio168"; /* SDC1 CMD */
+			function = "sdc1";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+		data-pins {
+			/* SDC1 D0 to D7 */
+			pins = "gpio159", "gpio160", "gpio161", "gpio162",
+			     "gpio163", "gpio164", "gpio165", "gpio166";
+			function = "sdc1";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	/*
+	 * The SDCC3 pins are hardcoded (non-muxable) but need some pin
+	 * configuration.
+	 */
+	dragon_sdcc3_pins: sdcc3-state {
+		clk-pins {
+			pins = "sdc3_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		cmd-pins {
+			pins = "sdc3_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		data-pins {
+			pins = "sdc3_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	/* Second SD card slot pins */
+	dragon_sdcc5_pins: sdcc5-state {
+		clk-pins {
+			pins = "gpio97"; /* SDC5 CLK */
+			function = "sdc5";
+			drive-strength = <16>;
+			bias-disable;
+		};
+		cmd-pins {
+			pins = "gpio95"; /* SDC5 CMD */
+			function = "sdc5";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+		data-pins {
+			/* SDC5 D0 to D3 */
+			pins = "gpio96", "gpio98", "gpio99", "gpio100";
+			function = "sdc5";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	dragon_gsbi3_i2c_pins: gsbi3-i2c-state {
+		pins = "gpio43", "gpio44";
+		function = "gsbi3";
+		drive-strength = <8>;
+		/* These have external pull-up 2.2kOhm to 1.8V */
+		bias-disable;
+	};
+
+	dragon_gsbi8_i2c_pins: gsbi8-i2c-state {
+		pins = "gpio64", "gpio65";
+		function = "gsbi8";
+		drive-strength = <16>;
+		/* These have external pull-up 2.2kOhm to 1.8V */
+		bias-disable;
+	};
+
+	dragon_gsbi12_i2c_pins: gsbi12-i2c-state {
+		pins = "gpio115", "gpio116";
+		function = "gsbi12";
+		drive-strength = <16>;
+		/* These have external pull-up 4.7kOhm to 1.8V */
+		bias-disable;
+	};
+
+	/* Primary serial port uart 0 pins */
+	dragon_gsbi12_serial_pins: gsbi12-serial-state {
+		tx-pins {
+			pins = "gpio117";
+			function = "gsbi12";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		rx-pins {
+			pins = "gpio118";
+			function = "gsbi12";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	dragon_ebi2_pins: ebi2-state {
+		/*
+		 * Pins used by EBI2 on the Dragonboard, actually only
+		 * CS2 is used by a real peripheral. CS0 is just
+		 * routed to a test point.
+		 */
+		mux0-pins {
+			pins =
+			    /* "gpio39", CS1A_N this is not good to mux */
+			    "gpio40", /* CS2A_N */
+			    "gpio134"; /* CS0_N testpoint TP29 */
+			function = "ebi2cs";
+		};
+		mux1-pins {
+			pins =
+			    /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
+			    "gpio123", "gpio124", "gpio125", "gpio126",
+			    "gpio127", "gpio128", "gpio129", "gpio130",
+			    /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */
+			    "gpio135", "gpio136", "gpio137", "gpio138",
+			    "gpio139", "gpio140", "gpio141", "gpio142",
+			    "gpio143", "gpio144", "gpio145", "gpio146",
+			    "gpio147", "gpio148", "gpio149", "gpio150",
+			    "gpio151", /* EBI2_OE_N */
+			    "gpio153", /* EBI2_ADV */
+			    "gpio157"; /* EBI2_WE_N */
+			function = "ebi2";
+		};
+	};
+
+	/* Interrupt line for the KXSD9 accelerometer */
+	dragon_kxsd9_gpios: kxsd9-state {
+		pins = "gpio57"; /* IRQ line */
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	dragon_tma340_gpios: tma340-state {
+		reset-pins {
+			/* RESET line, TS_ATTN, WAKE_CTP */
+			pins = "gpio58";
+			function = "gpio";
+			drive-strength = <6>;
+			bias-disable;
+		};
+		irq-pins {
+			pins = "gpio61"; /* IRQ line */
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&pm8058_xoadc {
+	/* Reference voltage 2.2 V */
+	xoadc-ref-supply = <&pm8058_l18>;
+
+	/* Board-specific channels */
+	adc-channel@5 {
+		/* Connected to AOUT of ALS sensor */
+		reg = <0x00 0x05>;
+	};
+
+	adc-channel@6 {
+		/* Connected to test point TP43 */
+		reg = <0x00 0x06>;
+	};
+
+	adc-channel@7 {
+		/* Connected to battery thermistor */
+		reg = <0x00 0x07>;
+	};
+
+	adc-channel@8 {
+		/* Connected to battery ID detector */
+		reg = <0x00 0x08>;
+	};
+
+	adc-channel@9 {
+		/* Connected to XO thermistor */
+		reg = <0x00 0x09>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
new file mode 100644
index 000000000000..947183992850
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
+/ {
+	model = "Asus Nexus7(flo)";
+	compatible = "asus,nexus7-flo", "qcom,apq8064";
+	chassis-type = "tablet";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+		serial1 = &gsbi6_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@88d00000 {
+			compatible = "ramoops";
+			reg = <0x88d00000 0x100000>;
+			record-size = <0x00020000>;
+			console-size = <0x00020000>;
+			ftrace-size = <0x00020000>;
+		};
+	};
+
+	ext_3p3v: regulator-ext-3p3v {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "ext_3p3v";
+		startup-delay-us = <0>;
+		gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	soc {
+		sram@2a03f000 {
+			compatible = "qcom,apq8064-imem", "syscon", "simple-mfd";
+			reg = <0x2a03f000 0x1000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x65c>;
+
+				mode-normal = <0x77665501>;
+				mode-bootloader = <0x77665500>;
+				mode-recovery = <0x77665502>;
+			};
+		};
+	};
+};
+
+&dsi0 {
+	vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
+	vdd-supply = <&pm8921_l8>;
+	vddio-supply = <&pm8921_lvs7>;
+	avdd-supply = <&pm8921_l11>;
+	status = "okay";
+
+	panel@0 {
+		reg = <0>;
+		compatible = "jdi,lt070me05000";
+
+		vddp-supply = <&pm8921_l17>;
+		iovcc-supply = <&pm8921_lvs7>;
+
+		enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+		dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+};
+
+&dsi0_in {
+	remote-endpoint = <&mdp_dsi1_out>;
+};
+
+&dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+	vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
+	status = "okay";
+};
+
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi1_i2c {
+	status = "okay";
+	clock-frequency = <200000>;
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+
+	bq27541@55 {
+		compatible = "ti,bq27541";
+		reg = <0x55>;
+	};
+
+};
+
+&gsbi3 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi3_i2c {
+	clock-frequency = <200000>;
+	status = "okay";
+
+	trackpad@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&tlmm_pinmux>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&gsbi6 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi6_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi6_uart_4pins>;
+	status = "okay";
+};
+
+&gsbi7 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi7_serial {
+	status = "okay";
+};
+
+&mdp {
+	status = "okay";
+};
+
+&mdp_dsi1_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vin_lvs2-supply = <&pm8921_s1>;
+
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
+		vdd_ncp-supply = <&pm8921_l6>;
+
+		/* Buck SMPS */
+		pm8921_s1: s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		/* msm otg HSUSB_VDDCX */
+		pm8921_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+		};
+
+		/*
+		 * msm_sdcc.1-sdc-vdd_io
+		 * tabla2x-slim-CDC_VDDA_RX
+		 * tabla2x-slim-CDC_VDDA_TX
+		 * tabla2x-slim-CDC_VDD_CP
+		 * tabla2x-slim-VDDIO_CDC
+		 */
+		pm8921_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <3200000>;
+			regulator-always-on;
+		};
+
+		pm8921_s7: s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
+
+		/* mipi_dsi.1-dsi1_pll_vdda */
+		pm8921_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+		};
+
+		/* msm_otg-HSUSB_3p3 */
+		pm8921_l3: l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			bias-pull-down;
+		};
+
+		/* msm_otg-HSUSB_1p8 */
+		pm8921_l4: l4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		/* msm_sdcc.1-sdc_vdd */
+		pm8921_l5: l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			bias-pull-down;
+		};
+
+		pm8921_l6: l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8921_l8: l8 {
+		};
+
+		/* mipi_dsi.1-dsi1_avdd */
+		pm8921_l11: l11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+			regulator-always-on;
+		};
+
+		/* pwm_power for backlight */
+		pm8921_l17: l17 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+		};
+
+		/* camera, qdsp6 */
+		pm8921_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		/*
+		 * tabla2x-slim-CDC_VDDA_A_1P2V
+		 * tabla2x-slim-VDDD_CDC_D
+		 */
+		pm8921_l25: l25 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			bias-pull-down;
+		};
+
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs4: lvs4 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs5: lvs5 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs6: lvs6 {
+			bias-pull-down;
+		};
+		/*
+		 * mipi_dsi.1-dsi1_vddio
+		 * pil_riva-pll_vdd
+		 */
+		pm8921_lvs7: lvs7 {
+			bias-pull-down;
+		};
+	};
+};
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+/* OTG */
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
new file mode 100644
index 000000000000..178c55c1efeb
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
+/ {
+	model = "CompuLab CM-QS600";
+	compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sdcc4_pwrseq: pwrseq-sdcc4 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_default_gpios>;
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+	};
+
+	/* on board fixed 3.3v supply */
+	v3p3_fixed: regulator-v3p3 {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIE V3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi1_i2c {
+	clock-frequency = <200000>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&gsbi7 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi7_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi7_uart_2pins>;
+	status = "okay";
+};
+
+&pcie {
+	vdda-supply = <&pm8921_s3>;
+	vdda_phy-supply = <&pm8921_lvs6>;
+	vdda_refclk-supply = <&v3p3_fixed>;
+	pinctrl-0 = <&pcie_pins>;
+	pinctrl-names = "default";
+	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_gpio {
+	wlan_default_gpios: wlan-gpios-state {
+		pinconf {
+			pins = "gpio43";
+			function = "normal";
+			bias-disable;
+			power-source = <PM8921_GPIO_S4>;
+		};
+	};
+};
+
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s1>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
+		/* Buck SMPS */
+		pm8921_s1: s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s3: s3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1400000>;
+			qcom,switch-mode-frequency = <4800000>;
+		};
+
+		pm8921_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
+
+		pm8921_s7: s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
+
+		pm8921_l3: l3 {
+			regulator-min-microvolt = <3050000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		pm8921_l4: l4 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l5: l5 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l23: l23 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		pm8921_lvs6: lvs6 {
+			bias-pull-down;
+		};
+	};
+};
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+/* External micro SD card */
+&sdcc3 {
+	vmmc-supply = <&v3p3_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&card_detect>;
+	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* WLAN */
+&sdcc4 {
+	status = "okay";
+	vmmc-supply = <&v3p3_fixed>;
+	vqmmc-supply = <&v3p3_fixed>;
+	mmc-pwrseq = <&sdcc4_pwrseq>;
+};
+
+&tlmm_pinmux {
+	card_detect: card-detect-state {
+		pins = "gpio26";
+		function = "gpio";
+		bias-disable;
+	};
+
+	pcie_pins: pcie-state {
+		pins = "gpio27";
+		function = "gpio";
+		drive-strength = <12>;
+		bias-disable;
+	};
+};
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb_hs3_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+&usb_hs4_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+/* OTG */
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb4 {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
new file mode 100644
index 000000000000..717bfd74edb7
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
+/ {
+	model = "Qualcomm APQ8064/IFC6410";
+	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+		serial1 = &gsbi6_serial;
+		i2c0 = &gsbi1_i2c;
+		i2c1 = &gsbi2_i2c;
+		i2c2 = &gsbi3_i2c;
+		i2c3 = &gsbi4_i2c;
+		spi0 = &gsbi5_spi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&notify_led>;
+
+		led-user1 {
+			label = "apq8064:green:user1";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+
+	sdcc4_pwrseq: pwrseq-sdcc4 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_default_gpios>;
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+	};
+
+	ext_3p3v: regulator-ext-3p3v {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "ext_3p3v";
+		startup-delay-us = <0>;
+		gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi1_i2c {
+	clock-frequency = <200000>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+&gsbi3 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi3_i2c {
+	status = "okay";
+};
+
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+/* CAM I2C MIPI-CSI connector */
+&gsbi4_i2c {
+	status = "okay";
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_SPI>;
+	status = "okay";
+};
+
+&gsbi5_spi {
+	num-cs = <1>;
+	cs-gpios = <&tlmm_pinmux 53 0>;
+	status = "okay";
+};
+
+&gsbi6 {
+	qcom,mode = <GSBI_PROT_UART_W_FC>;
+	status = "okay";
+};
+
+&gsbi6_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi6_uart_4pins>;
+	status = "okay";
+};
+
+&gsbi7 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi7_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi7_uart_2pins>;
+	status = "okay";
+};
+
+&hdmi {
+	core-vdda-supply = <&pm8921_hdmi_switch>;
+	status = "okay";
+};
+
+&hdmi_in {
+	remote-endpoint = <&mdp_dtv_out>;
+};
+
+&hdmi_out {
+	remote-endpoint = <&hdmi_con>;
+};
+
+&hdmi_phy {
+	status = "okay";
+	core-vdda-supply = <&pm8921_hdmi_switch>;
+};
+
+&mdp {
+	status = "okay";
+};
+
+&mdp_dtv_out {
+	remote-endpoint = <&hdmi_in>;
+};
+
+&pcie {
+	status = "okay";
+	vdda-supply = <&pm8921_s3>;
+	vdda_phy-supply = <&pm8921_lvs6>;
+	vdda_refclk-supply = <&ext_3p3v>;
+	pinctrl-0 = <&pcie_pins>;
+	pinctrl-names = "default";
+	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+};
+
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_gpio {
+	wlan_default_gpios: wlan-gpios-state {
+		pinconf {
+			pins = "gpio43";
+			function = "normal";
+			bias-disable;
+			power-source = <PM8921_GPIO_S4>;
+		};
+	};
+
+	notify_led: nled-state {
+		pinconf {
+			pins = "gpio18";
+			function = "normal";
+			bias-disable;
+			power-source = <PM8921_GPIO_S4>;
+		};
+	};
+};
+
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s1>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
+		/* Buck SMPS */
+		pm8921_s1: s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s3: s3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1400000>;
+			qcom,switch-mode-frequency = <4800000>;
+		};
+
+		pm8921_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
+
+		pm8921_s7: s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
+
+		pm8921_l3: l3 {
+			regulator-min-microvolt = <3050000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		pm8921_l4: l4 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l5: l5 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l6: l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l23: l23 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs6: lvs6 {
+			bias-pull-down;
+		};
+
+		pm8921_hdmi_switch: hdmi-switch {
+			bias-pull-down;
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata0 {
+	target-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+/* External micro SD card */
+&sdcc3 {
+	vmmc-supply = <&pm8921_l6>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&card_detect>;
+	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* WLAN */
+&sdcc4 {
+	vmmc-supply = <&ext_3p3v>;
+	vqmmc-supply = <&pm8921_lvs1>;
+	mmc-pwrseq = <&sdcc4_pwrseq>;
+	status = "okay";
+};
+
+&tlmm_pinmux {
+	card_detect: card-detect-state {
+		pins = "gpio26";
+		function = "gpio";
+		bias-disable;
+	};
+
+	pcie_pins: pcie-state {
+		pins = "gpio27";
+		function = "gpio";
+		drive-strength = <12>;
+		bias-disable;
+	};
+};
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb_hs3_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+&usb_hs4_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+/* OTG */
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb4 {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts
new file mode 100644
index 000000000000..fdbbc1389297
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
+/ {
+	model = "LG Nexus 4 (mako)";
+	compatible = "lg,nexus4-mako", "qcom,apq8064";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+		serial1 = &gsbi6_serial;
+		serial2 = &gsbi4_serial;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	battery_cell: battery-cell {
+		compatible = "simple-battery";
+		constant-charge-current-max-microamp = <900000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@88d00000 {
+			compatible = "ramoops";
+			reg = <0x88d00000 0x100000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			ftrace-size = <0x20000>;
+		};
+	};
+};
+
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_I2C>;
+
+	status = "okay";
+};
+
+&gsbi1_i2c {
+	clock-frequency = <200000>;
+
+	status = "okay";
+};
+
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+
+	status = "okay";
+};
+
+&gsbi4_serial {
+	status = "okay";
+};
+
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0, 1, KEY_VOLUMEUP)
+	>;
+
+	keypad,num-rows = <1>;
+	keypad,num-columns = <5>;
+
+	status = "okay";
+};
+
+&riva {
+	pinctrl-names = "default";
+	pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+
+	vddcx-supply = <&pm8921_s3>;
+	vddmx-supply = <&pm8921_l24>;
+	vddpx-supply = <&pm8921_s4>;
+
+	status = "okay";
+
+	iris {
+		vddxo-supply = <&pm8921_l4>;
+		vddrfa-supply = <&pm8921_s2>;
+		vddpa-supply = <&pm8921_l10>;
+		vdddig-supply = <&pm8921_lvs2>;
+	};
+};
+
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s1>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+		pm8921_l1: l1 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-always-on;
+			bias-pull-down;
+		};
+
+		/* mipi_dsi.1-dsi1_pll_vdda */
+		pm8921_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		/* msm_otg-HSUSB_3p3 */
+		pm8921_l3: l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3500000>;
+			bias-pull-down;
+		};
+
+		/* msm_otg-HSUSB_1p8 */
+		pm8921_l4: l4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		/* msm_sdcc.1-sdc_vdd */
+		pm8921_l5: l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		/* earjack_debug */
+		pm8921_l6: l6 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		/* mipi_dsi.1-dsi_vci */
+		pm8921_l8: l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		/* wcnss_wlan.0-iris_vddpa */
+		pm8921_l10: l10 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			bias-pull-down;
+		};
+
+		/* mipi_dsi.1-dsi1_avdd */
+		pm8921_l11: l11 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		/* touch_vdd */
+		pm8921_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		/* slimport_dvdd */
+		pm8921_l18: l18 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			bias-pull-down;
+		};
+
+		/* touch_io */
+		pm8921_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		/*
+		 * mipi_dsi.1-dsi_vddio
+		 * pil_qdsp6v4.1-pll_vdd
+		 * pil_qdsp6v4.2-pll_vdd
+		 * msm_ehci_host.0-HSUSB_1p8
+		 * msm_ehci_host.1-HSUSB_1p8
+		 */
+		pm8921_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		/*
+		 * tabla2x-slim-CDC_VDDA_A_1P2V
+		 * tabla2x-slim-VDDD_CDC_D
+		 */
+		pm8921_l24: l24 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8921_l25: l25 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-always-on;
+			bias-pull-down;
+		};
+
+		pm8921_l26: l26 {
+			regulator-min-microvolt = <375000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			bias-pull-down;
+		};
+
+		pm8921_l27: l27 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8921_l28: l28 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		/* wcnss_wlan.0-iris_vddio */
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		/* wcnss_wlan.0-iris_vdddig */
+		pm8921_lvs2: lvs2 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs3: lvs3 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs4: lvs4 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs5: lvs5 {
+			bias-pull-down;
+		};
+
+		/* mipi_dsi.1-dsi_iovcc */
+		pm8921_lvs6: lvs6 {
+			bias-pull-down;
+		};
+
+		/*
+		 * pil_riva-pll_vdd
+		 * lvds.0-lvds_vdda
+		 * mipi_dsi.1-dsi1_vddio
+		 * hdmi_msm.0-hdmi_vdda
+		 */
+		pm8921_lvs7: lvs7 {
+			bias-pull-down;
+		};
+
+		pm8921_ncp: ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+
+		/* Buck SMPS */
+		pm8921_s1: s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s2: s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* msm otg HSUSB_VDDCX */
+		pm8921_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+			bias-pull-down;
+		};
+
+		/*
+		 * msm_sdcc.1-sdc-vdd_io
+		 * tabla2x-slim-CDC_VDDA_RX
+		 * tabla2x-slim-CDC_VDDA_TX
+		 * tabla2x-slim-CDC_VDD_CP
+		 * tabla2x-slim-VDDIO_CDC
+		 */
+		pm8921_s4: s4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+		};
+
+		/*
+		 * supply vdd_l26, vdd_l27, vdd_l28
+		 */
+		pm8921_s7: s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
+
+		pm8921_s8: s8 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
new file mode 100644
index 000000000000..e53de709e9d1
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&tlmm_pinmux {
+	sdcc1_default_state: sdcc1-default-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc1_cmd";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdcc3_default_state: sdcc3-default-state {
+		clk-pins {
+			pins = "sdc3_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc3_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc3_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	sdc4_default_state: sdc4-default-state {
+		pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
+		function = "sdc4";
+	};
+
+	gsbi1_uart_2pins: gsbi1-uart-2pins-state {
+		pins = "gpio18", "gpio19";
+		function = "gsbi1";
+	};
+
+	gsbi1_uart_4pins: gsbi1-uart-4pins-state {
+		pins = "gpio18", "gpio19", "gpio20", "gpio21";
+		function = "gsbi1";
+	};
+
+	gsbi4_uart_pin_a: gsbi4-uart-pin-active-state {
+		rx-pins {
+			pins = "gpio11";
+			function = "gsbi4";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "gsbi4";
+			drive-strength = <4>;
+			bias-disable;
+		};
+	};
+
+	gsbi6_uart_2pins: gsbi6-uart-2pins-state {
+		pins = "gpio14", "gpio15";
+		function = "gsbi6";
+	};
+
+	gsbi6_uart_4pins: gsbi6-uart-4pins-state {
+		pins = "gpio14", "gpio15", "gpio16", "gpio17";
+		function = "gsbi6";
+	};
+
+	gsbi7_uart_2pins: gsbi7-uart-2pins-state {
+		pins = "gpio82", "gpio83";
+		function = "gsbi7";
+	};
+
+	gsbi7_uart_4pins: gsbi7_uart_4pins-state {
+		pins = "gpio82", "gpio83", "gpio84", "gpio85";
+		function = "gsbi7";
+	};
+
+	i2c1_default_state: i2c1-default-state {
+		pins = "gpio20", "gpio21";
+		function = "gsbi1";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	i2c1_sleep_state: i2c1-sleep-state {
+		pins = "gpio20", "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	i2c2_default_state: i2c2-default-state {
+		pins = "gpio24", "gpio25";
+		function = "gsbi2";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	i2c2_sleep_state: i2c2-sleep-state {
+		pins = "gpio24", "gpio25";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	i2c3_default_state: i2c3-default-state {
+		pins = "gpio8", "gpio9";
+		function = "gsbi3";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	i2c3_sleep_state: i2c3-sleep-state {
+		pins = "gpio8", "gpio9";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	i2c4_default_state: i2c4-default-state {
+		pins = "gpio12", "gpio13";
+		function = "gsbi4";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	i2c4_sleep_state: i2c4-sleep-state {
+		pins = "gpio12", "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	i2c6_default_state: i2c6-default-state {
+		pins = "gpio16", "gpio17";
+		function = "gsbi6";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	i2c6_sleep_state: i2c6-sleep-state {
+		pins = "gpio16", "gpio17";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	i2c7_default_state: i2c7-default-state {
+		pins = "gpio84", "gpio85";
+		function = "gsbi7";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	i2c7_sleep_state: i2c7-sleep-state {
+		pins = "gpio84", "gpio85";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	spi5_default_state: spi5-default-state {
+		spi5-pins {
+			pins = "gpio51", "gpio52", "gpio54";
+			function = "gsbi5";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		spi5-cs-pins {
+			pins = "gpio53";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spi5_sleep_state: spi5-sleep-state {
+		spi5-pins {
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	riva_fm_pin_a: riva-fm-active-state {
+		pins = "gpio14", "gpio15";
+		function = "riva_fm";
+	};
+
+	riva_bt_pin_a: riva-bt-active-state {
+		pins = "gpio16", "gpio17";
+		function = "riva_bt";
+	};
+
+	riva_wlan_pin_a: riva-wlan-active-state {
+		pins = "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
+		function = "riva_wlan";
+
+		drive-strength = <6>;
+		bias-pull-down;
+	};
+
+	hdmi_pinctrl: hdmi-pinctrl-state {
+		ddc-pins {
+			pins = "gpio70", "gpio71";
+			function = "hdmi";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		hpd-pins {
+			pins = "gpio72";
+			function = "hdmi";
+			bias-pull-down;
+			drive-strength = <16>;
+		};
+	};
+
+	ps_hold_default_state: ps-hold-default-state {
+		pins = "gpio78";
+		function = "ps_hold";
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
new file mode 100644
index 000000000000..7752f07973f9
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
+/ {
+	model = "Sony Xperia Z";
+	compatible = "sony,xperia-yuga", "qcom,apq8064";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &gsbi5_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi5_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi5_uart_pin_a>;
+	status = "okay";
+};
+
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_gpio {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio3", "gpio4", "gpio29", "gpio35";
+		function = "normal";
+
+		bias-pull-up;
+		drive-push-pull;
+		input-enable;
+		power-source = <2>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+		qcom,pull-up-strength = <0>;
+	};
+};
+
+&riva {
+	pinctrl-names = "default";
+	pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+
+	vddcx-supply = <&pm8921_s3>;
+	vddmx-supply = <&pm8921_l24>;
+	vddpx-supply = <&pm8921_s4>;
+
+	status = "okay";
+
+	iris {
+		vddxo-supply = <&pm8921_l4>;
+		vddrfa-supply = <&pm8921_s2>;
+		vddpa-supply = <&pm8921_l10>;
+		vdddig-supply = <&pm8921_lvs2>;
+	};
+};
+
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
+		vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vin_lvs_1_3_6-supply = <&pm8921_s4>;
+		vin_lvs_4_5_7-supply = <&pm8921_s4>;
+		vin_ncp-supply = <&pm8921_l6>;
+		vin_lvs2-supply = <&pm8921_s4>;
+		vin_l24-supply = <&pm8921_s1>;
+		vin_l25-supply = <&pm8921_s1>;
+		vin_l27-supply = <&pm8921_s7>;
+		vin_l28-supply = <&pm8921_s7>;
+
+		/* Buck SMPS */
+		pm8921_s1: s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s2: s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8921_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+			bias-pull-down;
+		};
+
+		pm8921_s4: s4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+		};
+
+		pm8921_s7: s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
+
+		pm8921_s8: s8 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+
+		/* PMOS LDO */
+		pm8921_l1: l1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			bias-pull-down;
+		};
+
+		pm8921_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l3: l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			bias-pull-down;
+		};
+
+		pm8921_l4: l4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l5: l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l6: l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l8: l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l10: l10 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			bias-pull-down;
+		};
+
+		pm8921_l11: l11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l12: l12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l16: l16 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l17: l17 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <2000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l18: l18 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l21: l21 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8921_l22: l22 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+
+		pm8921_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l24: l24 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8921_l25: l25 {
+			regulator-always-on;
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			bias-pull-down;
+		};
+
+		pm8921_l27: l27 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8921_l28: l28 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8921_l29: l29 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <2000000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs2: lvs2 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs3: lvs3 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs4: lvs4 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs5: lvs5 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs6: lvs6 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs7: lvs7 {
+			bias-pull-down;
+		};
+
+		pm8921_usb_switch: usb-switch {};
+
+		pm8921_hdmi_switch: hdmi-switch {
+			bias-pull-down;
+		};
+
+		pm8921_ncp: ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
+
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+&sdcc3 {
+	vmmc-supply = <&pm8921_l6>;
+	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdcc3_default_state>, <&sdcc3_cd_pin_a>;
+
+	status = "okay";
+};
+
+&tlmm_pinmux {
+	gsbi5_uart_pin_a: gsbi5-uart-pin-active-state {
+		rx-pins {
+			pins = "gpio52";
+			function = "gsbi5";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		tx-pins {
+			pins = "gpio51";
+			function = "gsbi5";
+			drive-strength = <4>;
+			bias-disable;
+		};
+	};
+
+
+	sdcc3_cd_pin_a: sdcc3-cd-pin-active-state {
+		pins = "gpio26";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064-v2.0.dtsi
index 46ed48f0244f..46ed48f0244f 100644
--- a/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-v2.0.dtsi
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
new file mode 100644
index 000000000000..09062b2ad8ba
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -0,0 +1,1701 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/clock/qcom,lcc-msm8960.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm APQ8064";
+	compatible = "qcom,apq8064";
+	interrupt-parent = <&intc>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smem_region: smem@80000000 {
+			reg = <0x80000000 0x200000>;
+			no-map;
+		};
+
+		wcnss_mem: wcnss@8f000000 {
+			reg = <0x8f000000 0x700000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&l2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+			cpu-idle-states = <&cpu_spc>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&l2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+			cpu-idle-states = <&cpu_spc>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&l2>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+			cpu-idle-states = <&cpu_spc>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&l2>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+			cpu-idle-states = <&cpu_spc>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		idle-states {
+			cpu_spc: cpu-spc {
+				compatible = "qcom,idle-state-spc",
+						"arm,idle-state";
+				entry-latency-us = <400>;
+				exit-latency-us = <900>;
+				min-residency-us = <3000>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+			coefficients = <1199 0>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+			coefficients = <1132 0>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+			coefficients = <1199 0>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 10>;
+			coefficients = <1132 0>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	clocks {
+		cxo_board: cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		pxo_board: pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_region>;
+
+		hwlocks = <&sfpb_mutex 3>;
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&l2cc 8 4>;
+		qcom,ipc-2 = <&l2cc 8 14>;
+		qcom,ipc-3 = <&l2cc 8 23>;
+		qcom,ipc-4 = <&sps_sic_non_secure 0x4094 0>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smsm: modem@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		q6_smsm: q6@2 {
+			reg = <2>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@3 {
+			reg = <3>;
+			interrupts = <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		dsps_smsm: dsps@4 {
+			reg = <4>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-apq8064", "qcom,scm";
+
+			clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
+			clock-names = "core";
+		};
+	};
+
+	replicator {
+		compatible = "arm,coresight-static-replicator";
+
+		clocks = <&rpmcc RPM_QDSS_CLK>;
+		clock-names = "apb_pclk";
+
+		in-ports {
+			port {
+				replicator_in: endpoint {
+					remote-endpoint = <&funnel_out>;
+				};
+			};
+		};
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				replicator_out0: endpoint {
+					remote-endpoint = <&etb_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out1: endpoint {
+					remote-endpoint = <&tpiu_in>;
+				};
+			};
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		tlmm_pinmux: pinctrl@800000 {
+			compatible = "qcom,apq8064-pinctrl";
+			reg = <0x800000 0x4000>;
+
+			gpio-controller;
+			gpio-ranges = <&tlmm_pinmux 0 0 90>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&ps_hold_default_state>;
+		};
+
+		sfpb_mutex: hwmutex@1200600 {
+			compatible = "qcom,sfpb-mutex";
+			reg = <0x01200600 0x100>;
+			#hwlock-cells = <1>;
+		};
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-wdt-apq8064", "qcom,kpss-timer",
+				     "qcom,msm-timer";
+			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>;
+			clocks = <&sleep_clk>;
+			clock-names = "sleep";
+			cpu-offset = <0x80000>;
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu0_aux";
+			#clock-cells = <0>;
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu1_aux";
+			#clock-cells = <0>;
+		};
+
+		acc2: clock-controller@20a8000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu2_aux";
+			#clock-cells = <0>;
+		};
+
+		acc3: clock-controller@20b8000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu3_aux";
+			#clock-cells = <0>;
+		};
+
+		saw0: power-manager@2089000 {
+			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+
+			saw0_vreg: regulator {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+			};
+		};
+
+		saw1: power-manager@2099000 {
+			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+
+			saw1_vreg: regulator {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+			};
+		};
+
+		saw2: power-manager@20a9000 {
+			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
+			reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
+
+			saw2_vreg: regulator {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+			};
+		};
+
+		saw3: power-manager@20b9000 {
+			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
+			reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
+
+			saw3_vreg: regulator {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+			};
+		};
+
+		sps_sic_non_secure: interrupt-controller@12100000 {
+			compatible = "qcom,apq8064-sps-sic", "syscon";
+			reg = <0x12100000 0x10000>;
+		};
+
+		gsbi1: gsbi@12440000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <1>;
+			reg = <0x12440000 0x100>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi1_serial: serial@12450000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x12450000 0x100>,
+				      <0x12400000 0x03>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi1_i2c: i2c@12460000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c1_default_state>;
+				pinctrl-1 = <&i2c1_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x12460000 0x1000>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+		};
+
+		gsbi2: gsbi@12480000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <2>;
+			reg = <0x12480000 0x100>;
+			clocks = <&gcc GSBI2_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi2_i2c: i2c@124a0000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x124a0000 0x1000>;
+				pinctrl-0 = <&i2c2_default_state>;
+				pinctrl-1 = <&i2c2_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi3: gsbi@16200000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <3>;
+			reg = <0x16200000 0x100>;
+			clocks = <&gcc GSBI3_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			gsbi3_i2c: i2c@16280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c3_default_state>;
+				pinctrl-1 = <&i2c3_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16280000 0x1000>;
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI3_QUP_CLK>,
+					 <&gcc GSBI3_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi4: gsbi@16300000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <4>;
+			reg = <0x16300000 0x03>;
+			clocks = <&gcc GSBI4_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi4_serial: serial@16340000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16340000 0x100>,
+				      <0x16300000 0x3>;
+				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&gsbi4_uart_pin_a>;
+				pinctrl-names = "default";
+				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi4_i2c: i2c@16380000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c4_default_state>;
+				pinctrl-1 = <&i2c4_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16380000 0x1000>;
+				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI4_QUP_CLK>,
+					 <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi5: gsbi@1a200000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x1a200000 0x03>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi5_serial: serial@1a240000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x1a240000 0x100>,
+				      <0x1a200000 0x03>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi5_spi: spi@1a280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi5_default_state>;
+				pinctrl-1 = <&spi5_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gsbi6: gsbi@16500000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <6>;
+			reg = <0x16500000 0x03>;
+			clocks = <&gcc GSBI6_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi6_serial: serial@16540000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16540000 0x100>,
+				      <0x16500000 0x03>;
+				interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi6_i2c: i2c@16580000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c6_default_state>;
+				pinctrl-1 = <&i2c6_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16580000 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI6_QUP_CLK>,
+					 <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi7: gsbi@16600000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <7>;
+			reg = <0x16600000 0x100>;
+			clocks = <&gcc GSBI7_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			syscon-tcsr = <&tcsr>;
+
+			gsbi7_serial: serial@16640000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16640000 0x1000>,
+				      <0x16600000 0x1000>;
+				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi7_i2c: i2c@16680000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c7_default_state>;
+				pinctrl-1 = <&i2c7_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16680000 0x1000>;
+				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI7_QUP_CLK>,
+					 <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+		};
+
+		ssbi2: ssbi@c00000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00c00000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		ssbi: ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		qfprom: efuse@700000 {
+			compatible = "qcom,apq8064-qfprom", "qcom,qfprom";
+			reg = <0x00700000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_calib: calib@404 {
+				reg = <0x404 0x10>;
+			};
+			tsens_backup: backup-calib@414 {
+				reg = <0x414 0x10>;
+			};
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-apq8064", "syscon";
+			reg = <0x00900000 0x4000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&cxo_board>,
+				 <&pxo_board>,
+				 <&lcc PLL4>;
+			clock-names = "cxo", "pxo", "pll4";
+
+			tsens: thermal-sensor {
+				compatible = "qcom,msm8960-tsens";
+
+				nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+				nvmem-cell-names = "calib", "calib_backup";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "uplow";
+
+				#qcom,sensors = <11>;
+				#thermal-sensor-cells = <1>;
+			};
+		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-apq8064";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL4_VOTE>,
+				 <0>,
+				 <0>, <0>,
+				 <0>, <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll4_vote",
+				      "mi2s_codec_clk",
+				      "codec_i2s_mic_codec_clk",
+				      "spare_i2s_mic_codec_clk",
+				      "codec_i2s_spkr_codec_clk",
+				      "spare_i2s_spkr_codec_clk",
+				      "pcm_codec_clk";
+		};
+
+		mmcc: clock-controller@4000000 {
+			compatible = "qcom,mmcc-apq8064";
+			reg = <0x4000000 0x1000>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL3>,
+				 <&gcc PLL8_VOTE>,
+				 <&dsi0_phy 1>,
+				 <&dsi0_phy 0>,
+				 <&dsi1_phy 1>,
+				 <&dsi1_phy 0>,
+				 <&hdmi_phy>,
+				 <&mdp>;
+			clock-names = "pxo",
+				      "pll3",
+				      "pll8_vote",
+				      "dsi1pll",
+				      "dsi1pllbyte",
+				      "dsi2pll",
+				      "dsi2pllbyte",
+				      "hdmipll",
+				      "lvdspll";
+		};
+
+		l2cc: clock-controller@2011000 {
+			compatible = "qcom,kpss-gcc-apq8064", "qcom,kpss-gcc", "syscon";
+			reg = <0x2011000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			#clock-cells = <0>;
+		};
+
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-apq8064";
+			reg = <0x108000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ack", "err", "wakeup";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc";
+				#clock-cells = <1>;
+				clocks = <&pxo_board>, <&cxo_board>;
+				clock-names = "pxo", "cxo";
+			};
+		};
+
+		usb1: usb@12500000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x12500000 0x200>,
+			      <0x12500200 0x200>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
+			assigned-clock-rates = <60000000>;
+			resets = <&gcc USB_HS1_RESET>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			ahb-burst-config = <0>;
+			phys = <&usb_hs1_phy>;
+			phy-names = "usb-phy";
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs1_phy: phy {
+					compatible = "qcom,usb-hs-phy-apq8064",
+						     "qcom,usb-hs-phy";
+					clocks = <&sleep_clk>, <&cxo_board>;
+					clock-names = "sleep", "ref";
+					resets = <&usb1 0>;
+					reset-names = "por";
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		usb3: usb@12520000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x12520000 0x200>,
+			      <0x12520200 0x200>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc USB_HS3_XCVR_CLK>, <&gcc USB_HS3_H_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc USB_HS3_XCVR_CLK>;
+			assigned-clock-rates = <60000000>;
+			resets = <&gcc USB_HS3_RESET>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			ahb-burst-config = <0>;
+			phys = <&usb_hs3_phy>;
+			phy-names = "usb-phy";
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs3_phy: phy {
+					compatible = "qcom,usb-hs-phy-apq8064",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&sleep_clk>, <&cxo_board>;
+					clock-names = "sleep", "ref";
+					resets = <&usb3 0>;
+					reset-names = "por";
+				};
+			};
+		};
+
+		usb4: usb@12530000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x12530000 0x200>,
+			      <0x12530200 0x200>;
+			interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc USB_HS4_XCVR_CLK>, <&gcc USB_HS4_H_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc USB_HS4_XCVR_CLK>;
+			assigned-clock-rates = <60000000>;
+			resets = <&gcc USB_HS4_RESET>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			ahb-burst-config = <0>;
+			phys = <&usb_hs4_phy>;
+			phy-names = "usb-phy";
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs4_phy: phy {
+					compatible = "qcom,usb-hs-phy-apq8064",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&sleep_clk>, <&cxo_board>;
+					clock-names = "sleep", "ref";
+					resets = <&usb4 0>;
+					reset-names = "por";
+				};
+			};
+		};
+
+		sata_phy0: phy@1b400000 {
+			compatible = "qcom,apq8064-sata-phy";
+			status = "disabled";
+			reg = <0x1b400000 0x200>;
+			clocks = <&gcc SATA_PHY_CFG_CLK>;
+			clock-names = "cfg";
+			#phy-cells = <0>;
+		};
+
+		sata0: sata@29000000 {
+			compatible = "qcom,apq8064-ahci", "generic-ahci";
+			status	 = "disabled";
+			reg	 = <0x29000000 0x180>;
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc SFAB_SATA_S_H_CLK>,
+				 <&gcc SATA_H_CLK>,
+				 <&gcc SATA_A_CLK>,
+				 <&gcc SATA_RXOOB_CLK>,
+				 <&gcc SATA_PMALIVE_CLK>;
+			clock-names = "slave_iface",
+				      "iface",
+				      "core",
+				      "rxoob",
+				      "pmalive";
+
+			assigned-clocks = <&gcc SATA_RXOOB_CLK>,
+					  <&gcc SATA_PMALIVE_CLK>;
+			assigned-clock-rates = <100000000>, <100000000>;
+
+			phys = <&sata_phy0>;
+			phy-names = "sata-phy";
+			ports-implemented = <0x1>;
+		};
+
+		sdcc3: mmc@12180000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x12180000 0x2000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <192000000>;
+			no-1-8-v;
+			dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+			dma-names = "tx", "rx";
+		};
+
+		sdcc3bam: dma-controller@12182000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x8000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc4: mmc@121c0000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x121c0000 0x2000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <48000000>;
+			dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdc4_default_state>;
+		};
+
+		sdcc4bam: dma-controller@121c2000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x121c2000 0x8000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC4_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc1: mmc@12400000 {
+			status = "disabled";
+			compatible = "arm,pl18x", "arm,primecell";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdcc1_default_state>;
+			arm,primecell-periphid = <0x00051180>;
+			reg = <0x12400000 0x2000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <8>;
+			max-frequency = <96000000>;
+			non-removable;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+			dma-names = "tx", "rx";
+		};
+
+		sdcc1bam: dma-controller@12402000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x8000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-apq8064", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
+		gpu: gpu@4300000 {
+			compatible = "qcom,adreno-320.2", "qcom,adreno";
+			reg = <0x04300000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+			clock-names =
+			    "core",
+			    "iface",
+			    "mem",
+			    "mem_iface";
+			clocks =
+			    <&mmcc GFX3D_CLK>,
+			    <&mmcc GFX3D_AHB_CLK>,
+			    <&mmcc GFX3D_AXI_CLK>,
+			    <&mmcc MMSS_IMEM_AHB_CLK>;
+
+			iommus = <&gfx3d 0
+				  &gfx3d 1
+				  &gfx3d 2
+				  &gfx3d 3
+				  &gfx3d 4
+				  &gfx3d 5
+				  &gfx3d 6
+				  &gfx3d 7
+				  &gfx3d 8
+				  &gfx3d 9
+				  &gfx3d 10
+				  &gfx3d 11
+				  &gfx3d 12
+				  &gfx3d 13
+				  &gfx3d 14
+				  &gfx3d 15
+				  &gfx3d 16
+				  &gfx3d 17
+				  &gfx3d 18
+				  &gfx3d 19
+				  &gfx3d 20
+				  &gfx3d 21
+				  &gfx3d 22
+				  &gfx3d 23
+				  &gfx3d 24
+				  &gfx3d 25
+				  &gfx3d 26
+				  &gfx3d 27
+				  &gfx3d 28
+				  &gfx3d 29
+				  &gfx3d 30
+				  &gfx3d 31
+				  &gfx3d1 0
+				  &gfx3d1 1
+				  &gfx3d1 2
+				  &gfx3d1 3
+				  &gfx3d1 4
+				  &gfx3d1 5
+				  &gfx3d1 6
+				  &gfx3d1 7
+				  &gfx3d1 8
+				  &gfx3d1 9
+				  &gfx3d1 10
+				  &gfx3d1 11
+				  &gfx3d1 12
+				  &gfx3d1 13
+				  &gfx3d1 14
+				  &gfx3d1 15
+				  &gfx3d1 16
+				  &gfx3d1 17
+				  &gfx3d1 18
+				  &gfx3d1 19
+				  &gfx3d1 20
+				  &gfx3d1 21
+				  &gfx3d1 22
+				  &gfx3d1 23
+				  &gfx3d1 24
+				  &gfx3d1 25
+				  &gfx3d1 26
+				  &gfx3d1 27
+				  &gfx3d1 28
+				  &gfx3d1 29
+				  &gfx3d1 30
+				  &gfx3d1 31>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
+				};
+
+				opp-27000000 {
+					opp-hz = /bits/ 64 <27000000>;
+				};
+			};
+		};
+
+		mmss_sfpb: syscon@5700000 {
+			compatible = "qcom,apq8064-mmss-sfpb", "syscon";
+			reg = <0x5700000 0x70>;
+		};
+
+		dsi0: dsi@4700000 {
+			compatible = "qcom,apq8064-dsi-ctrl",
+				     "qcom,mdss-dsi-ctrl";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x04700000 0x200>;
+			reg-names = "dsi_ctrl";
+
+			clocks = <&mmcc DSI_M_AHB_CLK>,
+				<&mmcc DSI_S_AHB_CLK>,
+				<&mmcc AMP_AHB_CLK>,
+				<&mmcc DSI_CLK>,
+				<&mmcc DSI1_BYTE_CLK>,
+				<&mmcc DSI_PIXEL_CLK>,
+				<&mmcc DSI1_ESC_CLK>;
+			clock-names = "iface", "bus", "core_mmss",
+					"src", "byte", "pixel",
+					"core";
+
+			assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
+					<&mmcc DSI1_ESC_SRC>,
+					<&mmcc DSI_SRC>,
+					<&mmcc DSI_PIXEL_SRC>;
+			assigned-clock-parents = <&dsi0_phy 0>,
+						<&dsi0_phy 0>,
+						<&dsi0_phy 1>,
+						<&dsi0_phy 1>;
+			syscon-sfpb = <&mmss_sfpb>;
+			phys = <&dsi0_phy>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi0_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dsi0_out: endpoint {
+					};
+				};
+			};
+		};
+
+
+		dsi0_phy: phy@4700200 {
+			compatible = "qcom,dsi-phy-28nm-8960";
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			reg = <0x04700200 0x100>,
+				<0x04700300 0x200>,
+				<0x04700500 0x5c>;
+			reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
+			clock-names = "iface", "ref";
+			clocks = <&mmcc DSI_M_AHB_CLK>,
+				 <&pxo_board>;
+			status = "disabled";
+		};
+
+		dsi1: dsi@5800000 {
+			compatible = "qcom,mdss-dsi-ctrl";
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x05800000 0x200>;
+			reg-names = "dsi_ctrl";
+
+			clocks = <&mmcc DSI2_M_AHB_CLK>,
+				 <&mmcc DSI2_S_AHB_CLK>,
+				 <&mmcc AMP_AHB_CLK>,
+				 <&mmcc DSI2_CLK>,
+				 <&mmcc DSI2_BYTE_CLK>,
+				 <&mmcc DSI2_PIXEL_CLK>,
+				 <&mmcc DSI2_ESC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "core_mmss",
+				      "src",
+				      "byte",
+				      "pixel",
+				      "core";
+
+			assigned-clocks = <&mmcc DSI2_BYTE_SRC>,
+					  <&mmcc DSI2_ESC_SRC>,
+					  <&mmcc DSI2_SRC>,
+					  <&mmcc DSI2_PIXEL_SRC>;
+			assigned-clock-parents = <&dsi1_phy 0>,
+						 <&dsi1_phy 0>,
+						 <&dsi1_phy 1>,
+						 <&dsi1_phy 1>;
+
+			syscon-sfpb = <&mmss_sfpb>;
+			phys = <&dsi1_phy>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi1_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dsi1_out: endpoint {
+					};
+				};
+			};
+		};
+
+
+		dsi1_phy: dsi-phy@5800200 {
+			compatible = "qcom,dsi-phy-28nm-8960";
+			reg = <0x05800200 0x100>,
+			      <0x05800300 0x200>,
+			      <0x05800500 0x5c>;
+			reg-names = "dsi_pll",
+				    "dsi_phy",
+				    "dsi_phy_regulator";
+			clock-names = "iface",
+				      "ref";
+			clocks = <&mmcc DSI2_M_AHB_CLK>,
+				 <&pxo_board>;
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdp_port0: iommu@7500000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc MDP_AXI_CLK>;
+			reg = <0x07500000 0x100000>;
+			interrupts =
+			    <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+			    <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ncb = <2>;
+		};
+
+		mdp_port1: iommu@7600000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc MDP_AXI_CLK>;
+			reg = <0x07600000 0x100000>;
+			interrupts =
+			    <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+			    <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ncb = <2>;
+		};
+
+		gfx3d: iommu@7c00000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc GFX3D_AXI_CLK>;
+			reg = <0x07c00000 0x100000>;
+			interrupts =
+			    <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			    <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ncb = <3>;
+		};
+
+		gfx3d1: iommu@7d00000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc GFX3D_AXI_CLK>;
+			reg = <0x07d00000 0x100000>;
+			interrupts =
+			    <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+			    <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ncb = <3>;
+		};
+
+		pcie: pcie@1b500000 {
+			compatible = "qcom,pcie-apq8064";
+			reg = <0x1b500000 0x1000>,
+			      <0x1b502000 0x80>,
+			      <0x1b600000 0x100>,
+			      <0x0ff00000 0x100000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00100000>, /* I/O */
+				 <0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* mem */
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			clocks = <&gcc PCIE_A_CLK>,
+				 <&gcc PCIE_H_CLK>,
+				 <&gcc PCIE_PHY_REF_CLK>;
+			clock-names = "core", "iface", "phy";
+			resets = <&gcc PCIE_ACLK_RESET>,
+				 <&gcc PCIE_HCLK_RESET>,
+				 <&gcc PCIE_POR_RESET>,
+				 <&gcc PCIE_PCI_RESET>,
+				 <&gcc PCIE_PHY_RESET>;
+			reset-names = "axi", "ahb", "por", "pci", "phy";
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		hdmi: hdmi-tx@4a00000 {
+			compatible = "qcom,hdmi-tx-8960";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pinctrl>;
+			reg = <0x04a00000 0x2f0>;
+			reg-names = "core_physical";
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mmcc HDMI_APP_CLK>,
+				 <&mmcc HDMI_M_AHB_CLK>,
+				 <&mmcc HDMI_S_AHB_CLK>;
+			clock-names = "core",
+				      "master_iface",
+				      "slave_iface";
+
+			phys = <&hdmi_phy>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					hdmi_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					hdmi_out: endpoint {
+					};
+				};
+			};
+		};
+
+		hdmi_phy: phy@4a00400 {
+			compatible = "qcom,hdmi-phy-8960";
+			reg = <0x4a00400 0x60>,
+			      <0x4a00500 0x100>;
+			reg-names = "hdmi_phy",
+				    "hdmi_pll";
+
+			clocks = <&mmcc HDMI_S_AHB_CLK>;
+			clock-names = "slave_iface";
+			#phy-cells = <0>;
+			#clock-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdp: display-controller@5100000 {
+			compatible = "qcom,mdp4";
+			reg = <0x05100000 0xf0000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mmcc MDP_CLK>,
+				 <&mmcc MDP_AHB_CLK>,
+				 <&mmcc MDP_AXI_CLK>,
+				 <&mmcc MDP_LUT_CLK>,
+				 <&mmcc HDMI_TV_CLK>,
+				 <&mmcc MDP_TV_CLK>,
+				 <&mmcc LVDS_CLK>,
+				 <&rpmcc RPM_PXO_CLK>;
+			clock-names = "core_clk",
+				      "iface_clk",
+				      "bus_clk",
+				      "lut_clk",
+				      "hdmi_clk",
+				      "tv_clk",
+				      "lcdc_clk",
+				      "pxo";
+
+			#clock-cells = <0>;
+
+			iommus = <&mdp_port0 0
+				  &mdp_port0 2
+				  &mdp_port1 0
+				  &mdp_port1 2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					mdp_lvds_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					mdp_dsi1_out: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					mdp_dsi2_out: endpoint {
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					mdp_dtv_out: endpoint {
+					};
+				};
+			};
+		};
+
+		riva: riva-pil@3200800 {
+			compatible = "qcom,riva-pil";
+
+			reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal";
+
+			memory-region = <&wcnss_mem>;
+
+			status = "disabled";
+
+			iris {
+				compatible = "qcom,wcn3660";
+
+				clocks = <&cxo_board>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&l2cc 8 25>;
+				qcom,smd-edge = <6>;
+
+				label = "riva";
+
+				wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&riva>;
+
+					bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		etb@1a01000 {
+			compatible = "arm,coresight-etb10", "arm,primecell";
+			reg = <0x1a01000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etb_in: endpoint {
+						remote-endpoint = <&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		tpiu@1a03000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x1a03000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tpiu_in: endpoint {
+						remote-endpoint = <&replicator_out1>;
+					};
+				};
+			};
+		};
+
+		funnel@1a04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x1a04000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * Not described input ports:
+				 * 2 - connected to STM component
+				 * 3 - not-connected
+				 * 6 - not-connected
+				 * 7 - not-connected
+				 */
+				port@0 {
+					reg = <0>;
+					funnel_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					funnel_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+				port@4 {
+					reg = <4>;
+					funnel_in4: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+				port@5 {
+					reg = <5>;
+					funnel_in5: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+		};
+
+		etm@1a1c000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x1a1c000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu0>;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@1a1d000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x1a1d000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu1>;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@1a1e000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x1a1e000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu2>;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm@1a1f000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x1a1f000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu3>;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&funnel_in5>;
+					};
+				};
+			};
+		};
+	};
+};
+#include "qcom-apq8064-pins.dtsi"
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
new file mode 100644
index 000000000000..34b0cf35fdac
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
@@ -0,0 +1,492 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-msm8974.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
+
+/delete-node/ &mpss_region;
+
+/ {
+	model = "Qualcomm APQ8074 Dragonboard";
+	compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+		usid0 = &pm8941_0;
+		usid4 = &pm8841_0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-0 = <&msm_keys_default>;
+		pinctrl-names = "default";
+
+		button-volup {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+		};
+
+		button-general {
+			label = "General";
+			linux,code = <KEY_PROG1>;
+			gpios = <&pm8941_gpios 23 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reserved-memory {
+		mpss_region: mpss@ac00000 {
+			reg = <0x0ac00000 0x2500000>;
+			no-map;
+		};
+	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_dma {
+	qcom,controlled-remotely;
+};
+
+&blsp2_i2c5 {
+	status = "okay";
+	clock-frequency = <200000>;
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		pagesize = <32>;
+		read-only;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm8941_l2>;
+	vdd-supply = <&pm8941_l22>;
+	vddio-supply = <&pm8941_l12>;
+
+	status = "okay";
+
+	panel: panel@0 {
+		compatible = "sharp,ls043t1le01-qhd";
+		reg = <0>;
+
+		avdd-supply = <&pm8941_l22>;
+		backlight = <&pm8941_wled>;
+		reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+
+	vddio-supply = <&pm8941_l12>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&pm8941_gpios {
+	msm_keys_default: pm8941-gpio-keys-state {
+		pins = "gpio5", "gpio23";
+		function = "normal";
+		input-enable;
+		drive-push-pull;
+		bias-pull-up;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+		power-source = <PM8941_GPIO_S3>; /* 1.8V */
+	};
+};
+
+&pm8941_lpg {
+	qcom,power-source = <1>;
+	status = "okay";
+
+	led@5 {
+		reg = <5>;
+		color = <LED_COLOR_ID_BLUE>;
+		function = LED_FUNCTION_INDICATOR;
+	};
+
+	led@6 {
+		reg = <6>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_INDICATOR;
+	};
+
+	led@7 {
+		reg = <7>;
+		color = <LED_COLOR_ID_RED>;
+		function = LED_FUNCTION_INDICATOR;
+	};
+};
+
+&pm8941_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8941_wled {
+	qcom,cs-out;
+	qcom,switching-freq = <3200>;
+	qcom,ovp = <32>;
+	qcom,num-strings = <1>;
+
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+
+	firmware-name = "qcom/apq8074/adsp.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mss {
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+
+	firmware-name = "qcom/apq8074/mba.mbn", "qcom/apq8074/modem.mbn";
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vin_5vs-supply = <&pm8941_5v>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l13>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+};
+
+&smbb {
+	status = "okay";
+};
+
+&tlmm {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+
+		cd-pins {
+			pins = "gpio62";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+};
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs2_phy>;
+	phy-select = <&tcsr 0xb000 1>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs2_phy {
+	status = "okay";
+	v3p3-supply = <&pm8941_l24>;
+	v1p8-supply = <&pm8941_l6>;
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x63>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
new file mode 100644
index 000000000000..1df24c922be9
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-apq8084.dtsi"
+#include "pma8084.dtsi"
+
+/ {
+	model = "Qualcomm APQ8084/IFC6540";
+	compatible = "qcom,apq8084-sbc", "qcom,apq8084";
+
+	aliases {
+		serial0 = &blsp2_uart2;
+		usid0 = &pma8084_0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		serial@f995e000 {
+			status = "okay";
+		};
+	};
+};
+
+&sdhc_1 {
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
index c6b6680248a6..d4e6aee034af 100644
--- a/arch/arm/boot/dts/qcom-apq8084-mtp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
+#include "pma8084.dtsi"
 
 / {
 	model = "Qualcomm APQ 8084-MTP";
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi
new file mode 100644
index 000000000000..cee0694ef127
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi
@@ -0,0 +1,852 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-apq8084.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm APQ 8084";
+	compatible = "qcom,apq8084";
+	interrupt-parent = <&intc>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smem_mem: smem-region@fa00000 {
+			reg = <0xfa00000 0x200000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <0>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&l2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+			cpu-idle-states = <&cpu_spc>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <1>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&l2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+			cpu-idle-states = <&cpu_spc>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <2>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&l2>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+			cpu-idle-states = <&cpu_spc>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <3>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&l2>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+			cpu-idle-states = <&cpu_spc>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			qcom,saw = <&saw_l2>;
+		};
+
+		idle-states {
+			cpu_spc: cpu-spc {
+				compatible = "qcom,idle-state-spc",
+						"arm,idle-state";
+				entry-latency-us = <150>;
+				exit-latency-us = <200>;
+				min-residency-us = <2000>;
+			};
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-apq8084", "qcom,scm";
+			clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <GIC_PPI 7 0xf04>;
+	};
+
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 2 0xf08>,
+			     <GIC_PPI 3 0xf08>,
+			     <GIC_PPI 4 0xf08>,
+			     <GIC_PPI 1 0xf08>;
+		clock-frequency = <19200000>;
+	};
+
+	smem {
+		compatible = "qcom,smem";
+
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		memory-region = <&smem_mem>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xf9000000 0x1000>,
+			      <0xf9002000 0x1000>;
+		};
+
+		apcs: syscon@f9011000 {
+			compatible = "syscon";
+			reg = <0xf9011000 0x1000>;
+		};
+
+		sram@fc190000 {
+			compatible = "qcom,apq8084-rpm-stats";
+			reg = <0xfc190000 0x10000>;
+		};
+
+		qfprom: efuse@fc4bc000 {
+			compatible = "qcom,apq8084-qfprom", "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@d0 {
+				reg = <0xd0 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s0_p1: s0-p1@d1 {
+				reg = <0xd1 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s1_p1: s1-p1@d2 {
+				reg = <0xd1 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s2_p1: s2-p1@d2 {
+				reg = <0xd2 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p1: s3-p1@d3 {
+				reg = <0xd3 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s4_p1: s4-p1@d4 {
+				reg = <0xd4 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p1: s5-p1@d4 {
+				reg = <0xd4 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1: s6-p1@d5 {
+				reg = <0xd5 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s7_p1: s7-p1@d6 {
+				reg = <0xd6 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s8_p1: s8-p1@d7 {
+				reg = <0xd7 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_mode: mode@d7 {
+				reg = <0xd7 0x1>;
+				bits = <6 2>;
+			};
+
+			tsens_s9_p1: s9-p1@d8 {
+				reg = <0xd8 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s10_p1: s10-p1@d8 {
+				reg = <0xd8 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_base2: base2@d9 {
+				reg = <0xd9 0x2>;
+				bits = <4 8>;
+			};
+
+			tsens_s0_p2: s0-p2@da {
+				reg = <0xda 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s1_p2: s1-p2@db {
+				reg = <0xdb 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s2_p2: s2-p2@dc {
+				reg = <0xdc 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s3_p2: s3-p2@dc {
+				reg = <0xdc 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s4_p2: s4-p2@dd {
+				reg = <0xdd 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s5_p2: s5-p2@de {
+				reg = <0xde 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s6_p2: s6-p2@df {
+				reg = <0xdf 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2: s7-p2@e0 {
+				reg = <0xe0 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s8_p2: s8-p2@e0 {
+				reg = <0xe0 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s9_p2: s9-p2@e1 {
+				reg = <0xe1 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s10_p2: s10-p2@e2 {
+				reg = <0xe2 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s5_p2_backup: s5-p2-backup@e3 {
+				reg = <0xe3 0x2>;
+				bits = <0 6>;
+			};
+
+			tsens_mode_backup: mode-backup@e3 {
+				reg = <0xe3 0x1>;
+				bits = <6 2>;
+			};
+
+			tsens_s6_p2_backup: s6-p2-backup@e4 {
+				reg = <0xe4 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2_backup: s7-p2-backup@e4 {
+				reg = <0xe4 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s8_p2_backup: s8-p2-backup@e5 {
+				reg = <0xe5 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s9_p2_backup: s9-p2-backup@e6 {
+				reg = <0xe6 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s10_p2_backup: s10-p2-backup@e7 {
+				reg = <0xe7 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_base1_backup: base1-backup@440 {
+				reg = <0x440 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s0_p1_backup: s0-p1-backup@441 {
+				reg = <0x441 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s1_p1_backup: s1-p1-backup@442 {
+				reg = <0x441 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s2_p1_backup: s2-p1-backup@442 {
+				reg = <0x442 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p1_backup: s3-p1-backup@443 {
+				reg = <0x443 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s4_p1_backup: s4-p1-backup@444 {
+				reg = <0x444 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p1_backup: s5-p1-backup@444 {
+				reg = <0x444 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1_backup: s6-p1-backup@445 {
+				reg = <0x445 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s7_p1_backup: s7-p1-backup@446 {
+				reg = <0x446 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_use_backup: use-backup@447 {
+				reg = <0x447 0x1>;
+				bits = <5 3>;
+			};
+
+			tsens_s8_p1_backup: s8-p1-backup@448 {
+				reg = <0x448 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s9_p1_backup: s9-p1-backup@448 {
+				reg = <0x448 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s10_p1_backup: s10-p1-backup@449 {
+				reg = <0x449 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_base2_backup: base2-backup@44a {
+				reg = <0x44a 0x2>;
+				bits = <2 8>;
+			};
+
+			tsens_s0_p2_backup: s0-p2-backup@44b {
+				reg = <0x44b 0x3>;
+				bits = <2 6>;
+			};
+
+			tsens_s1_p2_backup: s1-p2-backup@44c {
+				reg = <0x44c 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s2_p2_backup: s2-p2-backup@44c {
+				reg = <0x44c 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s3_p2_backup: s3-p2-backup@44d {
+				reg = <0x44d 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s4_p2_backup: s4-p2-backup@44e {
+				reg = <0x44e 0x1>;
+				bits = <2 6>;
+			};
+		};
+
+		tsens: thermal-sensor@fc4a9000 {
+			compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
+			reg = <0xfc4a9000 0x1000>, /* TM */
+			      <0xfc4a8000 0x1000>; /* SROT */
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_use_backup>,
+				      <&tsens_mode_backup>,
+				      <&tsens_base1_backup>, <&tsens_base2_backup>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>,
+				      <&tsens_s10_p1>, <&tsens_s10_p2>,
+				      <&tsens_s0_p1_backup>, <&tsens_s0_p2_backup>,
+				      <&tsens_s1_p1_backup>, <&tsens_s1_p2_backup>,
+				      <&tsens_s2_p1_backup>, <&tsens_s2_p2_backup>,
+				      <&tsens_s3_p1_backup>, <&tsens_s3_p2_backup>,
+				      <&tsens_s4_p1_backup>, <&tsens_s4_p2_backup>,
+				      <&tsens_s5_p1_backup>, <&tsens_s5_p2_backup>,
+				      <&tsens_s6_p1_backup>, <&tsens_s6_p2_backup>,
+				      <&tsens_s7_p1_backup>, <&tsens_s7_p2_backup>,
+				      <&tsens_s8_p1_backup>, <&tsens_s8_p2_backup>,
+				      <&tsens_s9_p1_backup>, <&tsens_s9_p2_backup>,
+				      <&tsens_s10_p1_backup>, <&tsens_s10_p2_backup>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "use_backup",
+					   "mode_backup",
+					   "base1_backup", "base2_backup",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2",
+					   "s10_p1", "s10_p2",
+					   "s0_p1_backup", "s0_p2_backup",
+					   "s1_p1_backup", "s1_p2_backup",
+					   "s2_p1_backup", "s2_p2_backup",
+					   "s3_p1_backup", "s3_p2_backup",
+					   "s4_p1_backup", "s4_p2_backup",
+					   "s5_p1_backup", "s5_p2_backup",
+					   "s6_p1_backup", "s6_p2_backup",
+					   "s7_p1_backup", "s7_p2_backup",
+					   "s8_p1_backup", "s8_p2_backup",
+					   "s9_p1_backup", "s9_p2_backup",
+					   "s10_p1_backup", "s10_p2_backup";
+			#qcom,sensors = <11>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+		timer@f9020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		saw0: power-manager@f9089000 {
+			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw1: power-manager@f9099000 {
+			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw2: power-manager@f90a9000 {
+			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw3: power-manager@f90b9000 {
+			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw_l2: power-manager@f9012000 {
+			compatible = "qcom,apq8084-saw2-v2.1-l2", "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+		};
+
+		acc0: power-manager@f9088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9088000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc1: power-manager@f9098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9098000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc2: power-manager@f90a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90a8000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc3: power-manager@f90b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90b8000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-apq8084";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfc400000 0x4000>;
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <0>, /* ufs */
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>, /* sata */
+				 <0>,
+				 <0>; /* pcie */
+			clock-names = "xo",
+				      "sleep_clk",
+				      "ufs_rx_symbol_0_clk_src",
+				      "ufs_rx_symbol_1_clk_src",
+				      "ufs_tx_symbol_0_clk_src",
+				      "ufs_tx_symbol_1_clk_src",
+				      "sata_asic0_clk",
+				      "sata_rx_clk",
+				      "pcie_pipe";
+		};
+
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,apq8084-tcsr-mutex", "qcom,tcsr-mutex";
+			reg = <0xfd484000 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		rpm_msg_ram: sram@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+		};
+
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,apq8084-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 147>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		blsp2_uart2: serial@f995e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995e000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		sdhc_1: mmc@f9824900 {
+			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@f98a4900 {
+			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			status = "disabled";
+		};
+
+		spmi_bus: spmi@fc4cf000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg-names = "core", "intr", "cnfg";
+			reg = <0xfc4cf000 0x1000>,
+			      <0xfc4cb000 0x1000>,
+			      <0xfc4ca000 0x1000>;
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,apq8084-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm-requests {
+				compatible = "qcom,rpm-apq8084", "qcom,smd-rpm";
+				qcom,smd-channels = "rpm_requests";
+
+				regulators-0 {
+					compatible = "qcom,rpm-pma8084-regulators";
+
+					pma8084_s1: s1 {};
+					pma8084_s2: s2 {};
+					pma8084_s3: s3 {};
+					pma8084_s4: s4 {};
+					pma8084_s5: s5 {};
+					pma8084_s6: s6 {};
+					pma8084_s7: s7 {};
+					pma8084_s8: s8 {};
+					pma8084_s9: s9 {};
+					pma8084_s10: s10 {};
+					pma8084_s11: s11 {};
+					pma8084_s12: s12 {};
+
+					pma8084_l1: l1 {};
+					pma8084_l2: l2 {};
+					pma8084_l3: l3 {};
+					pma8084_l4: l4 {};
+					pma8084_l5: l5 {};
+					pma8084_l6: l6 {};
+					pma8084_l7: l7 {};
+					pma8084_l8: l8 {};
+					pma8084_l9: l9 {};
+					pma8084_l10: l10 {};
+					pma8084_l11: l11 {};
+					pma8084_l12: l12 {};
+					pma8084_l13: l13 {};
+					pma8084_l14: l14 {};
+					pma8084_l15: l15 {};
+					pma8084_l16: l16 {};
+					pma8084_l17: l17 {};
+					pma8084_l18: l18 {};
+					pma8084_l19: l19 {};
+					pma8084_l20: l20 {};
+					pma8084_l21: l21 {};
+					pma8084_l22: l22 {};
+					pma8084_l23: l23 {};
+					pma8084_l24: l24 {};
+					pma8084_l25: l25 {};
+					pma8084_l26: l26 {};
+					pma8084_l27: l27 {};
+
+					pma8084_lvs1: lvs1 {};
+					pma8084_lvs2: lvs2 {};
+					pma8084_lvs3: lvs3 {};
+					pma8084_lvs4: lvs4 {};
+
+					pma8084_5vs1: 5vs1 {};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac-bit.dts
index cf7da1ab177c..1b27edce9d4f 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac-bit.dts
@@ -9,7 +9,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "ap120c-ac:green:power";
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_GREEN>;
@@ -17,14 +17,14 @@
 			default-state = "on";
 		};
 
-		wlan {
+		led-wlan {
 			label = "ap120c-ac:green:wlan";
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 		};
 
-		support {
+		led-support {
 			label = "ap120c-ac:green:support";
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dts
index c4f89b712fd9..a707057c887d 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dts
@@ -7,7 +7,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status: status {
+		status: led-status {
 			label = "ap120c-ac:blue:status";
 			function = LED_FUNCTION_STATUS;
 			color = <LED_COLOR_ID_BLUE>;
@@ -15,7 +15,7 @@
 			default-state = "keep";
 		};
 
-		wlan2g {
+		led-wlan2g {
 			label = "ap120c-ac:green:wlan2g";
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_GREEN>;
@@ -23,7 +23,7 @@
 			linux,default-trigger = "phy0tpt";
 		};
 
-		wlan5g {
+		led-wlan5g {
 			label = "ap120c-ac:red:wlan5g";
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_RED>;
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
index af9a26fb5d4a..be76bc39ac27 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
@@ -6,7 +6,15 @@
 
 / {
 	model = "ALFA Network AP120C-AC";
-	compatible = "alfa-network,ap120c-ac";
+	compatible = "alfa-network,ap120c-ac", "qcom,ipq4018";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 
 	keys {
 		compatible = "gpio-keys";
@@ -20,46 +28,42 @@
 };
 
 &tlmm {
-	i2c0_pins: i2c0_pinmux {
-		mux_i2c {
-			function = "blsp_i2c0";
-			pins = "gpio58", "gpio59";
-			drive-strength = <16>;
-			bias-disable;
-		};
+	i2c0_pins: i2c0-state {
+		function = "blsp_i2c0";
+		pins = "gpio58", "gpio59";
+		drive-strength = <16>;
+		bias-disable;
 	};
 
-	mdio_pins: mdio_pinmux {
-		mux_mdio {
+	mdio_pins: mdio-state {
+		mdio-pins {
 			pins = "gpio53";
 			function = "mdio";
 			bias-pull-up;
 		};
 
-		mux_mdc {
+		mdc-pins {
 			pins = "gpio52";
 			function = "mdc";
 			bias-pull-up;
 		};
 	};
 
-	serial0_pins: serial0_pinmux {
-		mux_uart {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
+	serial0_pins: serial0-state {
+		pins = "gpio60", "gpio61";
+		function = "blsp_uart0";
+		bias-disable;
 	};
 
-	spi0_pins: spi0_pinmux {
-		mux_spi {
+	spi0_pins: spi0-state {
+		spi0-pins {
 			function = "blsp_spi0";
 			pins = "gpio55", "gpio56", "gpio57";
 			drive-strength = <12>;
 			bias-disable;
 		};
 
-		mux_cs {
+		spi0-cs-pins {
 			function = "gpio";
 			pins = "gpio54", "gpio4";
 			drive-strength = <2>;
@@ -68,7 +72,7 @@
 		};
 	};
 
-	usb-power {
+	usb-power-hog {
 		line-name = "USB-power";
 		gpios = <1 GPIO_ACTIVE_HIGH>;
 		gpio-hog;
@@ -162,6 +166,20 @@
 				label = "ART";
 				reg = <0x00170000 0x00010000>;
 				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					precal_art_1000: precal@1000 {
+						reg = <0x1000 0x2f20>;
+					};
+
+					precal_art_5000: precal@5000 {
+						reg = <0x5000 0x2f20>;
+					};
+				};
 			};
 
 			partition@180000 {
@@ -178,7 +196,7 @@
 		};
 	};
 
-	nand@1 {
+	flash@1 {
 		compatible = "spi-nand";
 		reg = <1>;
 		spi-max-frequency = <40000000>;
@@ -225,11 +243,15 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 };
 
 &wifi1 {
 	status = "okay";
-	qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
+	qcom,calibration-variant = "ALFA-Network-AP120C-AC";
 };
 
 &usb3_hs_phy {
@@ -239,10 +261,11 @@
 &usb3 {
 	status = "okay";
 
-	dwc3@8a00000 {
-		phys = <&usb3_hs_phy>;
-		phy-names = "usb2-phy";
 	};
+
+&usb3_dwc {
+	phys = <&usb3_hs_phy>;
+	phy-names = "usb2-phy";
 };
 
 &usb2_hs_phy {
diff --git a/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts
index 394412619894..15baaf0d1529 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts
@@ -7,44 +7,39 @@
 
 / {
 	model = "8devices Jalapeno";
-	compatible = "8dev,jalapeno";
+	compatible = "8dev,jalapeno", "qcom,ipq4018";
 };
 
 &tlmm {
-	mdio_pins: mdio_pinmux {
-		pinmux_1 {
+	mdio_pins: mdio-state {
+		mdio-pins {
 			pins = "gpio53";
 			function = "mdio";
+			bias-pull-up;
 		};
 
-		pinmux_2 {
+		mdc-pins {
 			pins = "gpio52";
 			function = "mdc";
-		};
-
-		pinconf {
-			pins = "gpio52", "gpio53";
 			bias-pull-up;
 		};
 	};
 
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
+	serial_pins: serial-state {
+		pins = "gpio60", "gpio61";
+		function = "blsp_uart0";
+		bias-disable;
 	};
 
-	spi_0_pins: spi_0_pinmux {
-		pin {
+	spi_0_pins: spi-0-state {
+		spi0-pins {
 			function = "blsp_spi0";
 			pins = "gpio55", "gpio56", "gpio57";
 			drive-strength = <2>;
 			bias-disable;
 		};
 
-		pin_cs {
+		spi0-cs-pins {
 			function = "gpio";
 			pins = "gpio54", "gpio59";
 			drive-strength = <2>;
@@ -184,13 +179,13 @@
 &wifi0 {
 	status = "okay";
 
-	qcom,ath10k-calibration-variant = "8devices-Jalapeno";
+	qcom,calibration-variant = "8devices-Jalapeno";
 };
 
 &wifi1 {
 	status = "okay";
 
-	qcom,ath10k-calibration-variant = "8devices-Jalapeno";
+	qcom,calibration-variant = "8devices-Jalapeno";
 };
 
 &usb3_ss_phy {
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1-c1.dts
index ddaa273f72ca..ddaa273f72ca 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1-c1.dts
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
new file mode 100644
index 000000000000..efbe89dd4793
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
@@ -0,0 +1,101 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "qcom-ipq4019.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&prng {
+	status = "okay";
+};
+
+&tlmm {
+	serial_pins: serial-state {
+		pins = "gpio60", "gpio61";
+		function = "blsp_uart0";
+		bias-disable;
+	};
+
+	spi_0_pins: spi-0-state {
+		spi0-pins {
+			pins = "gpio55", "gpio56", "gpio57";
+			function = "blsp_spi0";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		spi0-cs-pins {
+			pins = "gpio54";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <24000000>;
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi0 {
+	status = "okay";
+};
+
+&wifi1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1-c1.dts
index 79b0c6318e52..0993f840d1fc 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1-c1.dts
@@ -11,9 +11,9 @@
 		dma-controller@7984000 {
 			status = "okay";
 		};
-
-		qpic-nand@79b0000 {
-			status = "okay";
-		};
 	};
 };
+
+&nand {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1-c3.dts
index 7765247125e4..7765247125e4 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1-c3.dts
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
index 44a9597d8bfd..91e296d2ea82 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
@@ -24,26 +24,26 @@
 
 	soc {
 		pinctrl@1000000 {
-			serial_0_pins: serial0-pinmux {
+			serial_0_pins: serial0-state {
 				pins = "gpio16", "gpio17";
 				function = "blsp_uart0";
 				bias-disable;
 			};
 
-			serial_1_pins: serial1-pinmux {
+			serial_1_pins: serial1-state {
 				pins = "gpio8", "gpio9",
 					"gpio10", "gpio11";
 				function = "blsp_uart1";
 				bias-disable;
 			};
 
-			spi_0_pins: spi-0-pinmux {
-				pinmux {
+			spi_0_pins: spi-0-state {
+				spi0-pins {
 					function = "blsp_spi0";
 					pins = "gpio13", "gpio14", "gpio15";
 					bias-disable;
 				};
-				pinmux_cs {
+				spi0-cs-pins {
 					function = "gpio";
 					pins = "gpio12";
 					bias-disable;
@@ -51,13 +51,13 @@
 				};
 			};
 
-			i2c_0_pins: i2c-0-pinmux {
+			i2c_0_pins: i2c-0-state {
 				pins = "gpio20", "gpio21";
 				function = "blsp_i2c0";
 				bias-disable;
 			};
 
-			nand_pins: nand-pins {
+			nand_pins: nand-state {
 				pins = "gpio53", "gpio55", "gpio56",
 					"gpio57", "gpio58", "gpio59",
 					"gpio60", "gpio62", "gpio63",
@@ -87,7 +87,7 @@
 			pinctrl-0 = <&spi_0_pins>;
 			pinctrl-names = "default";
 			status = "okay";
-			cs-gpios = <&tlmm 12 0>;
+			cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
 
 			flash@0 {
 				#address-cells = <1>;
@@ -98,14 +98,14 @@
 			};
 		};
 
-		pci@40000000 {
+		pcie@40000000 {
 			status = "okay";
-			perst-gpio = <&tlmm 38 0x1>;
-		};
-
-		qpic-nand@79b0000 {
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
+			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
+
+&nand {
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts
index c7a6e77da272..41c5874f6f97 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 // Copyright (c) 2018, The Linux Foundation. All rights reserved.
 
+#include <dt-bindings/gpio/gpio.h>
 #include "qcom-ipq4019-ap.dk07.1.dtsi"
 
 / {
@@ -10,7 +11,7 @@
 	soc {
 		pci@40000000 {
 			status = "okay";
-			perst-gpio = <&tlmm 38 0x1>;
+			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 		};
 
 		spi@78b6000 {
@@ -18,20 +19,20 @@
 		};
 
 		pinctrl@1000000 {
-			serial_1_pins: serial1-pinmux {
+			serial_1_pins: serial1-state {
 				pins = "gpio8", "gpio9",
 					"gpio10", "gpio11";
 				function = "blsp_uart1";
 				bias-disable;
 			};
 
-			spi_0_pins: spi-0-pinmux {
-				pinmux {
+			spi_0_pins: spi-0-state {
+				spi0-pins {
 					function = "blsp_spi0";
 					pins = "gpio13", "gpio14", "gpio15";
 					bias-disable;
 				};
-				pinmux_cs {
+				spio-cs-pins {
 					function = "gpio";
 					pins = "gpio12";
 					bias-disable;
@@ -50,7 +51,7 @@
 			pinctrl-0 = <&spi_0_pins>;
 			pinctrl-names = "default";
 			status = "okay";
-			cs-gpios = <&tlmm 12 0>;
+			cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
 
 			flash@0 {
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts
index bd3553dd2070..67ee99d69757 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts
@@ -9,7 +9,7 @@
 
 	soc {
 		pinctrl@1000000 {
-			serial_1_pins: serial1-pinmux {
+			serial_1_pins: serial1-state {
 				pins = "gpio8", "gpio9";
 				function = "blsp_uart1";
 				bias-disable;
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi
index 0107f552f520..5a95a2d03c42 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi
@@ -24,26 +24,26 @@
 
 	soc {
 		pinctrl@1000000 {
-			serial_0_pins: serial0-pinmux {
+			serial_0_pins: serial0-state {
 				pins = "gpio16", "gpio17";
 				function = "blsp_uart0";
 				bias-disable;
 			};
 
-			i2c_0_pins: i2c-0-pinmux {
+			i2c_0_pins: i2c-0-state {
 				pins = "gpio20", "gpio21";
 				function = "blsp_i2c0";
 				bias-disable;
 			};
 
-			nand_pins: nand-pins {
+			nand_pins: nand-state {
 				pins = "gpio53", "gpio55", "gpio56",
 				       "gpio57", "gpio58", "gpio59",
 				       "gpio60", "gpio62", "gpio63",
 				       "gpio64", "gpio65", "gpio66",
 				       "gpio67", "gpio68", "gpio69";
 				function = "qpic";
-                        };
+			};
 		};
 
 		serial@78af000 {
@@ -65,11 +65,11 @@
 		dma-controller@7984000 {
 			status = "okay";
 		};
-
-		qpic-nand@79b0000 {
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
 	};
 };
+
+&nand {
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index bb307b8f678c..8eeaab1c0be1 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -47,13 +47,12 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc0>;
 			qcom,saw = <&saw0>;
 			reg = <0x0>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			clock-latency = <256000>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
@@ -61,13 +60,12 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc1>;
 			qcom,saw = <&saw1>;
 			reg = <0x1>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			clock-latency = <256000>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
@@ -75,13 +73,12 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc2>;
 			qcom,saw = <&saw2>;
 			reg = <0x2>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			clock-latency = <256000>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
@@ -89,24 +86,24 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc3>;
 			qcom,saw = <&saw3>;
 			reg = <0x3>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			clock-latency = <256000>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
-		L2: l2-cache {
+		l2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			qcom,saw = <&saw_l2>;
 		};
 	};
 
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -125,7 +122,7 @@
 		opp-716000000 {
 			opp-hz = /bits/ 64 <716000000>;
 			clock-latency-ns = <256000>;
- 		};
+		};
 	};
 
 	memory {
@@ -143,7 +140,6 @@
 		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
 			clock-frequency = <32000>;
-			clock-output-names = "gcc_sleep_clk_src";
 			#clock-cells = <0>;
 		};
 
@@ -162,10 +158,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 2 0xf08>,
-			     <1 3 0xf08>,
-			     <1 4 0xf08>,
-			     <1 1 0xf08>;
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		clock-frequency = <48000000>;
 		always-on;
 	};
@@ -179,6 +175,7 @@
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x0b000000 0x1000>,
 			<0x0b002000 0x1000>;
@@ -187,9 +184,10 @@
 		gcc: clock-controller@1800000 {
 			compatible = "qcom,gcc-ipq4019";
 			#clock-cells = <1>;
-			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x1800000 0x60000>;
+			clocks = <&xo>, <&sleep_clk>;
+			clock-names = "xo", "sleep_clk";
 		};
 
 		prng: rng@22000 {
@@ -222,14 +220,18 @@
 		};
 
 		sdhci: mmc@7824900 {
-			compatible = "qcom,sdhci-msm-v4";
+			compatible = "qcom,ipq4019-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0x7824900 0x11c>, <0x7824000 0x800>;
+			reg-names = "hc", "core";
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			bus-width = <8>;
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>,
-				 <&gcc GCC_DCD_XO_CLK>;
-			clock-names = "core", "iface", "xo";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
 			status = "disabled";
 		};
 
@@ -324,54 +326,49 @@
 			status = "disabled";
 		};
 
-		acc0: clock-controller@b088000 {
+		acc0: power-manager@b088000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
 		};
 
-		acc1: clock-controller@b098000 {
+		acc1: power-manager@b098000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
 		};
 
-		acc2: clock-controller@b0a8000 {
+		acc2: power-manager@b0a8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
 		};
 
-		acc3: clock-controller@b0b8000 {
+		acc3: power-manager@b0b8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
 		};
 
-		saw0: regulator@b089000 {
-			compatible = "qcom,saw2";
+		saw0: power-manager@b089000 {
+			compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
 			reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
-                        regulator;
 		};
 
-		saw1: regulator@b099000 {
-			compatible = "qcom,saw2";
+		saw1: power-manager@b099000 {
+			compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
 			reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
-		saw2: regulator@b0a9000 {
-			compatible = "qcom,saw2";
+		saw2: power-manager@b0a9000 {
+			compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
 			reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
-		saw3: regulator@b0b9000 {
-			compatible = "qcom,saw2";
+		saw3: power-manager@b0b9000 {
+			compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
 			reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
-		saw_l2: regulator@b012000 {
-			compatible = "qcom,saw2";
+		saw_l2: power-manager@b012000 {
+			compatible = "qcom,ipq4019-saw2-l2", "qcom,saw2";
 			reg = <0xb012000 0x1000>;
-			regulator;
 		};
 
 		blsp1_uart1: serial@78af000 {
@@ -399,7 +396,7 @@
 		};
 
 		watchdog: watchdog@b017000 {
-			compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019";
+			compatible = "qcom,kpss-wdt-ipq4019", "qcom,kpss-wdt";
 			reg = <0xb017000 0x40>;
 			clocks = <&sleep_clk>;
 			timeout-sec = <10>;
@@ -411,12 +408,12 @@
 			reg = <0x4ab000 0x4>;
 		};
 
-		pcie0: pci@40000000 {
-			compatible = "qcom,pcie-ipq4019", "snps,dw-pcie";
-			reg =  <0x40000000 0xf1d
-				0x40000f20 0xa8
-				0x80000 0x2000
-				0x40100000 0x1000>;
+		pcie0: pcie@40000000 {
+			compatible = "qcom,pcie-ipq4019";
+			reg = <0x40000000 0xf1d>,
+			      <0x40000f20 0xa8>,
+			      <0x80000 0x2000>,
+			      <0x40100000 0x1000>;
 			reg-names = "dbi", "elbi", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <0>;
@@ -425,17 +422,17 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
-				 <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
+			ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>,
+				 <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 			clocks = <&gcc GCC_PCIE_AHB_CLK>,
 				 <&gcc GCC_PCIE_AXI_M_CLK>,
 				 <&gcc GCC_PCIE_AXI_S_CLK>;
@@ -469,6 +466,16 @@
 				      "phy_ahb";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		qpic_bam: dma-controller@7984000 {
@@ -540,9 +547,9 @@
 				     <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names =  "msi0",  "msi1",  "msi2",  "msi3",
-					   "msi4",  "msi5",  "msi6",  "msi7",
-					   "msi8",  "msi9", "msi10", "msi11",
+			interrupt-names = "msi0",  "msi1",  "msi2",  "msi3",
+					  "msi4",  "msi5",  "msi6",  "msi7",
+					  "msi8",  "msi9", "msi10", "msi11",
 					  "msi12", "msi13", "msi14", "msi15",
 					  "legacy";
 			status = "disabled";
@@ -582,9 +589,9 @@
 				     <GIC_SPI 62 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 63 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names =  "msi0",  "msi1",  "msi2",  "msi3",
-					   "msi4",  "msi5",  "msi6",  "msi7",
-					   "msi8",  "msi9", "msi10", "msi11",
+			interrupt-names = "msi0",  "msi1",  "msi2",  "msi3",
+					  "msi4",  "msi5",  "msi6",  "msi7",
+					  "msi8",  "msi9", "msi10", "msi11",
 					  "msi12", "msi13", "msi14", "msi15",
 					  "legacy";
 			status = "disabled";
@@ -597,28 +604,37 @@
 			reg = <0x90000 0x64>;
 			status = "disabled";
 
-			ethphy0: ethernet-phy@0 {
+			ethernet-phy-package@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "qcom,qca8075-package";
 				reg = <0>;
-			};
 
-			ethphy1: ethernet-phy@1 {
-				reg = <1>;
-			};
+				qcom,tx-drive-strength-milliwatt = <300>;
 
-			ethphy2: ethernet-phy@2 {
-				reg = <2>;
-			};
+				ethphy0: ethernet-phy@0 {
+					reg = <0>;
+				};
 
-			ethphy3: ethernet-phy@3 {
-				reg = <3>;
-			};
+				ethphy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				ethphy2: ethernet-phy@2 {
+					reg = <2>;
+				};
 
-			ethphy4: ethernet-phy@4 {
-				reg = <4>;
+				ethphy3: ethernet-phy@3 {
+					reg = <3>;
+				};
+
+				ethphy4: ethernet-phy@4 {
+					reg = <4>;
+				};
 			};
 		};
 
-		usb3_ss_phy: ssphy@9a000 {
+		usb3_ss_phy: usb-phy@9a000 {
 			compatible = "qcom,usb-ss-ipq4019-phy";
 			#phy-cells = <0>;
 			reg = <0x9a000 0x800>;
@@ -628,7 +644,7 @@
 			status = "disabled";
 		};
 
-		usb3_hs_phy: hsphy@a6000 {
+		usb3_hs_phy: usb-phy@a6000 {
 			compatible = "qcom,usb-hs-ipq4019-phy";
 			#phy-cells = <0>;
 			reg = <0xa6000 0x40>;
@@ -638,7 +654,7 @@
 			status = "disabled";
 		};
 
-		usb3: usb3@8af8800 {
+		usb3: usb@8af8800 {
 			compatible = "qcom,ipq4019-dwc3", "qcom,dwc3";
 			reg = <0x8af8800 0x100>;
 			#address-cells = <1>;
@@ -650,7 +666,7 @@
 			ranges;
 			status = "disabled";
 
-			dwc3@8a00000 {
+			usb3_dwc: usb@8a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x8a00000 0xf8000>;
 				interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
@@ -660,7 +676,7 @@
 			};
 		};
 
-		usb2_hs_phy: hsphy@a8000 {
+		usb2_hs_phy: usb-phy@a8000 {
 			compatible = "qcom,usb-hs-ipq4019-phy";
 			#phy-cells = <0>;
 			reg = <0xa8000 0x40>;
@@ -670,7 +686,7 @@
 			status = "disabled";
 		};
 
-		usb2: usb2@60f8800 {
+		usb2: usb@60f8800 {
 			compatible = "qcom,ipq4019-dwc3", "qcom,dwc3";
 			reg = <0x60f8800 0x100>;
 			#address-cells = <1>;
@@ -678,11 +694,11 @@
 			clocks = <&gcc GCC_USB2_MASTER_CLK>,
 				 <&gcc GCC_USB2_SLEEP_CLK>,
 				 <&gcc GCC_USB2_MOCK_UTMI_CLK>;
-			clock-names = "master", "sleep", "mock_utmi";
+			clock-names = "core", "sleep", "mock_utmi";
 			ranges;
 			status = "disabled";
 
-			dwc3@6000000 {
+			usb@6000000 {
 				compatible = "snps,dwc3";
 				reg = <0x6000000 0xf8000>;
 				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8062-smb208.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8062-smb208.dtsi
new file mode 100644
index 000000000000..9d06255104c7
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8062-smb208.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "qcom-ipq8062.dtsi"
+
+&rpm {
+	smb208_regulators: regulators {
+		compatible = "qcom,rpm-smb208-regulators";
+
+		smb208_s1a: s1a {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s1b: s1b {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2a: s2a {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2b: s2b {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8062.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8062.dtsi
new file mode 100644
index 000000000000..5d3ebd3e2e51
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8062.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8062";
+	compatible = "qcom,ipq8062", "qcom,ipq8064";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts
new file mode 100644
index 000000000000..5a8bf1a6f559
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
+	compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
+
+	soc {
+		pinmux@800000 {
+			buttons_pins: buttons-state {
+				pins = "gpio54", "gpio65";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
+
+		gsbi@16300000 {
+			i2c@16380000 {
+				status = "okay";
+				clock-frequency = <200000>;
+				pinctrl-0 = <&i2c4_pins>;
+				pinctrl-names = "default";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts
new file mode 100644
index 000000000000..f09da9460c86
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts
@@ -0,0 +1,462 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-ipq8064.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "MikroTik RB3011UiAS-RM";
+	compatible = "mikrotik,rb3011", "qcom,ipq8064";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac3;
+		mdio-gpio0 = &mdio0;
+		mdio-gpio1 = &mdio1;
+	};
+
+	chosen {
+		bootargs = "loglevel=8 console=ttyMSM0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&buttons_pins>;
+		pinctrl-names = "default";
+
+		button {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led-0 {
+			label = "rb3011:green:user";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	memory@42000000 {
+		reg = <0x42000000 0x3e000000>;
+		device_type = "memory";
+	};
+
+	mdio0: mdio-0 {
+		status = "okay";
+		compatible = "virtual,mdio-gpio";
+		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
+			<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-0 = <&mdio0_pins>;
+		pinctrl-names = "default";
+
+		switch0: switch@10 {
+			compatible = "qca,qca8337";
+
+			dsa,member = <0 0>;
+
+			pinctrl-0 = <&sw0_reset_pin>;
+			pinctrl-names = "default";
+
+			reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+			reg = <0x10>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch0cpu: port@0 {
+					reg = <0>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "rgmii-id";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "sw1";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "sw2";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "sw3";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "sw4";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "sw5";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+			};
+		};
+	};
+
+	mdio1: mdio-1 {
+		status = "okay";
+		compatible = "virtual,mdio-gpio";
+		gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
+			<&qcom_pinmux 10 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-0 = <&mdio1_pins>;
+		pinctrl-names = "default";
+
+		switch1: switch@14 {
+			compatible = "qca,qca8337";
+
+			dsa,member = <1 0>;
+
+			pinctrl-0 = <&sw1_reset_pin>;
+			pinctrl-names = "default";
+
+			reset-gpios = <&qcom_pinmux 17 GPIO_ACTIVE_LOW>;
+			reg = <0x10>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch1cpu: port@0 {
+					reg = <0>;
+					label = "cpu";
+					ethernet = <&gmac3>;
+					phy-mode = "sgmii";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "sw6";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "sw7";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "sw8";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "sw9";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "sw10";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
+				};
+			};
+		};
+	};
+
+	soc {
+		gsbi5: gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "okay";
+
+			spi4: spi@1a280000 {
+				status = "okay";
+
+				pinctrl-0 = <&spi_pins>;
+				pinctrl-names = "default";
+
+				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+				norflash: flash@0 {
+					compatible = "jedec,spi-nor";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+
+					partition@0 {
+						label = "RouterBoot";
+						reg = <0x0 0x40000>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};
+
+&gmac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	qcom,id = <0>;
+	phy-handle = <&switch0cpu>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac3 {
+	status = "okay";
+
+	phy-mode = "sgmii";
+	qcom,id = <3>;
+	phy-handle = <&switch1cpu>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gsbi7 {
+	status = "okay";
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+};
+
+&gsbi7_serial {
+	status = "okay";
+};
+
+&hs_phy_1 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				label = "RouterBoard NAND 1 Boot";
+				reg = <0x0000000 0x0800000>;
+			};
+
+			main@800000 {
+				label = "RouterBoard NAND 1 Main";
+				reg = <0x0800000 0x7800000>;
+			};
+		};
+	};
+};
+
+&qcom_pinmux {
+	buttons_pins: buttons-state {
+		pins = "gpio66";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	leds_pins: leds-state {
+		pins = "gpio33";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	mdio1_pins: mdio1-state {
+		pins = "gpio10", "gpio11";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sw0_reset_pin: sw0-reset-state {
+		pins = "gpio16";
+		drive-strength = <16>;
+		function = "gpio";
+		bias-disable;
+		input-disable;
+	};
+
+	sw1_reset_pin: sw1-reset-state {
+		pins = "gpio17";
+		drive-strength = <16>;
+		function = "gpio";
+		bias-disable;
+		input-disable;
+	};
+
+	usb1_pwr_en_pins: usb1-pwr-en-state {
+		pins = "gpio4";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-high;
+	};
+};
+
+&ss_phy_1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	pinctrl-0 = <&usb1_pwr_en_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064-smb208.dtsi
index ac9c44f0c164..ac9c44f0c164 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-smb208.dtsi
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi
new file mode 100644
index 000000000000..49de9752632f
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-ipq8064.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8064-v1.0";
+
+	aliases {
+		serial0 = &gsbi4_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&buttons_pins>;
+		pinctrl-names = "default";
+
+		button-1 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+		button-2 {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led-0 {
+			label = "led_usb1";
+			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usbdev";
+			default-state = "off";
+		};
+
+		led-1 {
+			label = "led_usb3";
+			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usbdev";
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "status_led_fail";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-3 {
+			label = "sata_led";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-4 {
+			label = "status_led_pass";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	soc {
+		gsbi@16300000 {
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			status = "okay";
+
+			serial@16340000 {
+				status = "okay";
+			};
+		};
+
+		gsbi5: gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "okay";
+
+			spi4: spi@1a280000 {
+				status = "okay";
+
+				pinctrl-0 = <&spi_pins>;
+				pinctrl-names = "default";
+
+				cs-gpios = <&qcom_pinmux 20 0>;
+
+				flash: flash@0 {
+					compatible = "s25fl256s1";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+
+					partition@0 {
+						label = "rootfs";
+						reg = <0x0 0x1000000>;
+					};
+
+					partition@1 {
+						label = "scratch";
+						reg = <0x1000000 0x1000000>;
+					};
+				};
+			};
+		};
+
+		sata-phy@1b400000 {
+			status = "okay";
+		};
+
+		sata@29000000 {
+			ports-implemented = <0x1>;
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0-smb208.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0-smb208.dtsi
new file mode 100644
index 000000000000..0442580b22de
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0-smb208.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+&rpm {
+	smb208_regulators: regulators {
+		compatible = "qcom,rpm-smb208-regulators";
+
+		smb208_s1a: s1a {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s1b: s1b {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2a: s2a {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1250000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2b: s2b {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1250000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0.dtsi
new file mode 100644
index 000000000000..2f117d576daf
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8064.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8064-v2.0";
+
+	aliases {
+		serial0 = &gsbi4_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+};
+
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+
+	serial@16340000 {
+		status = "okay";
+	};
+	/*
+	 * The i2c device on gsbi4 should not be enabled.
+	 * On ipq806x designs gsbi4 i2c is meant for exclusive
+	 * RPM usage. Turning this on in kernel manifests as
+	 * i2c failure for the RPM.
+	 */
+};
+
+&pcie0 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie1 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie2 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&sata {
+	ports-implemented = <0x1>;
+};
+
+&ss_phy_0 {
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
+};
+
+&ss_phy_1 {
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index c8337c870bdb..adedcc6da1da 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -27,7 +27,7 @@
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
 			reg = <0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc0>;
 			qcom,saw = <&saw0>;
 		};
@@ -37,14 +37,15 @@
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
 			reg = <1>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc1>;
 			qcom,saw = <&saw1>;
 		};
 
-		L2: l2-cache {
+		l2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -326,30 +327,70 @@
 		};
 	};
 
+	stmmac_axi_setup: stmmac-axi-config {
+		snps,wr_osr_lmt = <7>;
+		snps,rd_osr_lmt = <7>;
+		snps,blen = <16 0 0 0 0 0 0>;
+	};
+
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 		compatible = "simple-bus";
 
-		lpass@28100000 {
-			compatible = "qcom,lpass-cpu";
-			status = "disabled";
-			clocks = <&lcc AHBIX_CLK>,
-					<&lcc MI2S_OSR_CLK>,
-					<&lcc MI2S_BIT_CLK>;
-			clock-names = "ahbix-clk",
-					"mi2s-osr-clk",
-					"mi2s-bit-clk";
-			interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "lpass-irq-lpaif";
-			reg = <0x28100000 0x10000>;
-			reg-names = "lpass-lpaif";
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-ipq8064";
+			reg = <0x00108000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ack", "err", "wakeup";
+
+			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
+			clock-names = "ram";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+		};
+
+		ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		qfprom: efuse@700000 {
+			compatible = "qcom,ipq8064-qfprom", "qcom,qfprom";
+			reg = <0x00700000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			speedbin_efuse: speedbin@c0 {
+				reg = <0xc0 0x4>;
+			};
+			tsens_calib: calib@400 {
+				reg = <0x400 0xb>;
+			};
+			tsens_calib_backup: calib-backup@410 {
+				reg = <0x410 0xb>;
+			};
 		};
 
 		qcom_pinmux: pinmux@800000 {
 			compatible = "qcom,ipq8064-pinctrl";
-			reg = <0x800000 0x4000>;
+			reg = <0x00800000 0x4000>;
 
 			gpio-controller;
 			gpio-ranges = <&qcom_pinmux 0 0 69>;
@@ -358,70 +399,58 @@
 			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 
-			pcie0_pins: pcie0_pinmux {
-				mux {
-					pins = "gpio3";
-					function = "pcie1_rst";
-					drive-strength = <12>;
-					bias-disable;
-				};
+			pcie0_pins: pcie0-state {
+				pins = "gpio3";
+				function = "pcie1_rst";
+				drive-strength = <12>;
+				bias-disable;
 			};
 
-			pcie1_pins: pcie1_pinmux {
-				mux {
-					pins = "gpio48";
-					function = "pcie2_rst";
-					drive-strength = <12>;
-					bias-disable;
-				};
+			pcie1_pins: pcie1-state {
+				pins = "gpio48";
+				function = "pcie2_rst";
+				drive-strength = <12>;
+				bias-disable;
 			};
 
-			pcie2_pins: pcie2_pinmux {
-				mux {
-					pins = "gpio63";
-					function = "pcie3_rst";
-					drive-strength = <12>;
-					bias-disable;
-				};
+			pcie2_pins: pcie2-state {
+				pins = "gpio63";
+				function = "pcie3_rst";
+				drive-strength = <12>;
+				bias-disable;
 			};
 
-			i2c4_pins: i2c4-default {
+			i2c4_pins: i2c4-state {
 				pins = "gpio12", "gpio13";
 				function = "gsbi4";
 				drive-strength = <12>;
 				bias-disable;
 			};
 
-			spi_pins: spi_pins {
-				mux {
-					pins = "gpio18", "gpio19", "gpio21";
-					function = "gsbi5";
-					drive-strength = <10>;
-					bias-none;
-				};
+			spi_pins: spi-state {
+				pins = "gpio18", "gpio19", "gpio21";
+				function = "gsbi5";
+				drive-strength = <10>;
+				bias-disable;
 			};
 
-			leds_pins: leds_pins {
-				mux {
-					pins = "gpio7", "gpio8", "gpio9",
-					       "gpio26", "gpio53";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-down;
-					output-low;
-				};
+			leds_pins: leds-state {
+				pins = "gpio7", "gpio8", "gpio9",
+					"gpio26", "gpio53";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+				output-low;
 			};
 
-			buttons_pins: buttons_pins {
-				mux {
-					pins = "gpio54";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
+			buttons_pins: buttons-state {
+				pins = "gpio54";
+				drive-strength = <2>;
+				bias-pull-up;
 			};
 
-			nand_pins: nand_pins {
-				mux {
+			nand_pins: nand-state {
+				nand-pins {
 					pins = "gpio34", "gpio35", "gpio36",
 					       "gpio37", "gpio38", "gpio39",
 					       "gpio40", "gpio41", "gpio42",
@@ -432,14 +461,14 @@
 					bias-disable;
 				};
 
-				pullups {
+				nand-pullup-pins {
 					pins = "gpio39";
 					function = "nand";
 					drive-strength = <10>;
 					bias-pull-up;
 				};
 
-				hold {
+				nand-hold-pins {
 					pins = "gpio40", "gpio41", "gpio42",
 					       "gpio43", "gpio44", "gpio45",
 					       "gpio46", "gpio47";
@@ -449,39 +478,64 @@
 				};
 			};
 
-			mdio0_pins: mdio0-pins {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "mdio";
-					drive-strength = <8>;
-					bias-disable;
-				};
+			mdio0_pins: mdio0-state {
+				pins = "gpio0", "gpio1";
+				function = "mdio";
+				drive-strength = <8>;
+				bias-disable;
 			};
 
-			rgmii2_pins: rgmii2-pins {
-				mux {
-					pins = "gpio27", "gpio28", "gpio29",
-					       "gpio30", "gpio31", "gpio32",
-					       "gpio51", "gpio52", "gpio59",
-					       "gpio60", "gpio61", "gpio62";
-					function = "rgmii2";
-					drive-strength = <8>;
-					bias-disable;
-				};
+			rgmii2_pins: rgmii2-state {
+				pins = "gpio27", "gpio28", "gpio29",
+					"gpio30", "gpio31", "gpio32",
+					"gpio51", "gpio52", "gpio59",
+					"gpio60", "gpio61", "gpio62";
+				function = "rgmii2";
+				drive-strength = <8>;
+				bias-disable;
 			};
 		};
 
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-ipq8064", "syscon";
+			clocks = <&pxo_board>, <&cxo_board>, <&lcc PLL4>;
+			clock-names = "pxo", "cxo", "pll4";
+			reg = <0x00900000 0x4000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			tsens: thermal-sensor {
+				compatible = "qcom,ipq8064-tsens";
+
+				nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+				nvmem-cell-names = "calib", "calib_backup";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "uplow";
+
+				#qcom,sensors = <11>;
+				#thermal-sensor-cells = <1>;
+			};
+		};
+
+		sfpb_mutex: hwlock@1200600 {
+			compatible = "qcom,sfpb-mutex";
+			reg = <0x01200600 0x100>;
+
+			#hwlock-cells = <1>;
+		};
+
 		intc: interrupt-controller@2000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x02000000 0x1000>,
 			      <0x02002000 0x1000>;
 		};
 
 		timer@200a000 {
-			compatible = "qcom,kpss-timer",
-				     "qcom,kpss-wdt-ipq8064", "qcom,msm-timer";
+			compatible = "qcom,kpss-wdt-ipq8064", "qcom,kpss-timer",
+				     "qcom,msm-timer";
 			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) |
 						 IRQ_TYPE_EDGE_RISING)>,
 				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) |
@@ -493,53 +547,205 @@
 				     <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) |
 						 IRQ_TYPE_EDGE_RISING)>;
 			reg = <0x0200a000 0x100>;
-			clock-frequency = <25000000>,
-					  <32768>;
+			clock-frequency = <25000000>;
 			clocks = <&sleep_clk>;
 			clock-names = "sleep";
 			cpu-offset = <0x80000>;
 		};
 
+		l2cc: clock-controller@2011000 {
+			compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon";
+			reg = <0x02011000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			#clock-cells = <0>;
+		};
+
 		acc0: clock-controller@2088000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu0_aux";
+			#clock-cells = <0>;
+		};
+
+		saw0: power-manager@2089000 {
+			compatible = "qcom,ipq8064-saw2-cpu", "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
 		};
 
 		acc1: clock-controller@2098000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu1_aux";
+			#clock-cells = <0>;
 		};
 
-		adm_dma: dma-controller@18300000 {
-			compatible = "qcom,adm";
-			reg = <0x18300000 0x100000>;
-			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
+		saw1: power-manager@2099000 {
+			compatible = "qcom,ipq8064-saw2-cpu", "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+		};
 
-			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
-			clock-names = "core", "iface";
+		nss_common: syscon@3000000 {
+			compatible = "syscon";
+			reg = <0x03000000 0x0000FFFF>;
+		};
 
-			resets = <&gcc ADM0_RESET>,
-				 <&gcc ADM0_PBUS_RESET>,
-				 <&gcc ADM0_C0_RESET>,
-				 <&gcc ADM0_C1_RESET>,
-				 <&gcc ADM0_C2_RESET>;
-			reset-names = "clk", "pbus", "c0", "c1", "c2";
-			qcom,ee = <0>;
+		usb3_0: usb@100f8800 {
+			compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x100f8800 0x8000>;
+			clocks = <&gcc USB30_0_MASTER_CLK>;
+			clock-names = "core";
+
+			ranges;
+
+			resets = <&gcc USB30_0_MASTER_RESET>;
 
 			status = "disabled";
+
+			dwc3_0: usb@10000000 {
+				compatible = "snps,dwc3";
+				reg = <0x10000000 0xcd00>;
+				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hs_phy_0>, <&ss_phy_0>;
+				phy-names = "usb2-phy", "usb3-phy";
+				dr_mode = "host";
+				snps,dis_u3_susphy_quirk;
+			};
 		};
 
-		saw0: regulator@2089000 {
-			compatible = "qcom,saw2";
-			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
+		hs_phy_0: phy@100f8800 {
+			compatible = "qcom,ipq806x-usb-phy-hs";
+			reg = <0x100f8800 0x30>;
+			clocks = <&gcc USB30_0_UTMI_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
-		saw1: regulator@2099000 {
-			compatible = "qcom,saw2";
-			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
+		ss_phy_0: phy@100f8830 {
+			compatible = "qcom,ipq806x-usb-phy-ss";
+			reg = <0x100f8830 0x30>;
+			clocks = <&gcc USB30_0_MASTER_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb3_1: usb@110f8800 {
+			compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x110f8800 0x8000>;
+			clocks = <&gcc USB30_1_MASTER_CLK>;
+			clock-names = "core";
+
+			ranges;
+
+			resets = <&gcc USB30_1_MASTER_RESET>;
+
+			status = "disabled";
+
+			dwc3_1: usb@11000000 {
+				compatible = "snps,dwc3";
+				reg = <0x11000000 0xcd00>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hs_phy_1>, <&ss_phy_1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				dr_mode = "host";
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		hs_phy_1: phy@110f8800 {
+			compatible = "qcom,ipq806x-usb-phy-hs";
+			reg = <0x110f8800 0x30>;
+			clocks = <&gcc USB30_1_UTMI_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ss_phy_1: phy@110f8830 {
+			compatible = "qcom,ipq806x-usb-phy-ss";
+			reg = <0x110f8830 0x30>;
+			clocks = <&gcc USB30_1_MASTER_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		sdcc3bam: dma-controller@12182000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x8000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc1bam: dma-controller@12402000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x8000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		amba: amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sdcc3: mmc@12180000 {
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status = "disabled";
+				reg = <0x12180000 0x2000>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <192000000>;
+				sd-uhs-sdr104;
+				sd-uhs-ddr50;
+				vqmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+				dma-names = "tx", "rx";
+			};
+
+			sdcc1: mmc@12400000 {
+				status = "disabled";
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg = <0x12400000 0x2000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				max-frequency = <96000000>;
+				non-removable;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				vmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+				dma-names = "tx", "rx";
+			};
 		};
 
 		gsbi1: gsbi@12440000 {
@@ -654,56 +860,6 @@
 			};
 		};
 
-		gsbi5: gsbi@1a200000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <5>;
-			reg = <0x1a200000 0x100>;
-			clocks = <&gcc GSBI5_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi5_serial: serial@1a240000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x1a240000 0x1000>,
-				      <0x1a200000 0x1000>;
-				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			i2c@1a280000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x1a280000 0x1000>;
-				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			spi@1a280000 {
-				compatible = "qcom,spi-qup-v1.1.1";
-				reg = <0x1a280000 0x1000>;
-				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
 		gsbi6: gsbi@16500000 {
 			compatible = "qcom,gsbi-v1.0.0";
 			reg = <0x16500000 0x100>;
@@ -784,6 +940,82 @@
 			};
 		};
 
+		adm_dma: dma-controller@18300000 {
+			compatible = "qcom,adm";
+			reg = <0x18300000 0x100000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+
+			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+			clock-names = "core", "iface";
+
+			resets = <&gcc ADM0_RESET>,
+				 <&gcc ADM0_PBUS_RESET>,
+				 <&gcc ADM0_C0_RESET>,
+				 <&gcc ADM0_C1_RESET>,
+				 <&gcc ADM0_C2_RESET>;
+			reset-names = "clk", "pbus", "c0", "c1", "c2";
+			qcom,ee = <0>;
+
+			status = "disabled";
+		};
+
+		gsbi5: gsbi@1a200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x1a200000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi5_serial: serial@1a240000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x1a240000 0x1000>,
+				      <0x1a200000 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			i2c@1a280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			spi@1a280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-ipq8064", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
 		rng@1a500000 {
 			compatible = "qcom,prng";
 			reg = <0x1a500000 0x200>;
@@ -791,17 +1023,6 @@
 			clock-names = "core";
 		};
 
-		sata_phy: sata-phy@1b400000 {
-			compatible = "qcom,ipq806x-sata-phy";
-			reg = <0x1b400000 0x200>;
-
-			clocks = <&gcc SATA_PHY_CFG_CLK>;
-			clock-names = "cfg";
-
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
 		nand: nand-controller@1ac00000 {
 			compatible = "qcom,ipq806x-nand";
 			reg = <0x1ac00000 0x800>;
@@ -824,114 +1045,18 @@
 			status = "disabled";
 		};
 
-		sata: sata@29000000 {
-			compatible = "qcom,ipq806x-ahci", "generic-ahci";
-			reg = <0x29000000 0x180>;
-
-			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&gcc SFAB_SATA_S_H_CLK>,
-				 <&gcc SATA_H_CLK>,
-				 <&gcc SATA_A_CLK>,
-				 <&gcc SATA_RXOOB_CLK>,
-				 <&gcc SATA_PMALIVE_CLK>;
-			clock-names = "slave_face", "iface", "core",
-					"rxoob", "pmalive";
+		sata_phy: sata-phy@1b400000 {
+			compatible = "qcom,ipq806x-sata-phy";
+			reg = <0x1b400000 0x200>;
 
-			assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
-			assigned-clock-rates = <100000000>, <100000000>;
+			clocks = <&gcc SATA_PHY_CFG_CLK>;
+			clock-names = "cfg";
 
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
+			#phy-cells = <0>;
 			status = "disabled";
 		};
 
-		qcom,ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x00500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-		};
-
-		qfprom: qfprom@700000 {
-			compatible = "qcom,ipq8064-qfprom", "qcom,qfprom";
-			reg = <0x00700000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			speedbin_efuse: speedbin@c0 {
-				reg = <0xc0 0x4>;
-			};
-			tsens_calib: calib@400 {
-				reg = <0x400 0xb>;
-			};
-			tsens_calib_backup: calib_backup@410 {
-				reg = <0x410 0xb>;
-			};
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-ipq8064", "syscon";
-			clocks = <&pxo_board>, <&cxo_board>;
-			clock-names = "pxo", "cxo";
-			reg = <0x00900000 0x4000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-
-			tsens: thermal-sensor@900000 {
-				compatible = "qcom,ipq8064-tsens";
-
-				nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
-				nvmem-cell-names = "calib", "calib_backup";
-				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "uplow";
-
-				#qcom,sensors = <11>;
-				#thermal-sensor-cells = <1>;
-			};
-		};
-
-		rpm: rpm@108000 {
-			compatible = "qcom,rpm-ipq8064";
-			reg = <0x108000 0x1000>;
-			qcom,ipc = <&l2cc 0x8 2>;
-
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ack", "err", "wakeup";
-
-			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
-			clock-names = "ram";
-
-			rpmcc: clock-controller {
-				compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
-				#clock-cells = <1>;
-				clocks = <&pxo_board>;
-				clock-names = "pxo";
-			};
-		};
-
-		tcsr: syscon@1a400000 {
-			compatible = "qcom,tcsr-ipq8064", "syscon";
-			reg = <0x1a400000 0x100>;
-		};
-
-		l2cc: clock-controller@2011000 {
-			compatible = "qcom,kpss-gcc", "syscon";
-			reg = <0x2011000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-			clock-names = "pll8_vote", "pxo";
-			clock-output-names = "acpu_l2_aux";
-		};
-
-		lcc: clock-controller@28000000 {
-			compatible = "qcom,lcc-ipq8064";
-			reg = <0x28000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		pcie0: pci@1b500000 {
+		pcie0: pcie@1b500000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b500000 0x1000
 			       0x1b502000 0x80
@@ -945,17 +1070,17 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000   /* downstream I/O */
-				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc PCIE_A_CLK>,
 				 <&gcc PCIE_H_CLK>,
@@ -979,10 +1104,20 @@
 			pinctrl-names = "default";
 
 			status = "disabled";
-			perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
-		pcie1: pci@1b700000 {
+		pcie1: pcie@1b700000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b700000 0x1000
 			       0x1b702000 0x80
@@ -996,17 +1131,17 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000   /* downstream I/O */
-				  0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc PCIE_1_A_CLK>,
 				 <&gcc PCIE_1_H_CLK>,
@@ -1030,10 +1165,20 @@
 			pinctrl-names = "default";
 
 			status = "disabled";
-			perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
-		pcie2: pci@1b900000 {
+		pcie2: pcie@1b900000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b900000 0x1000
 			       0x1b902000 0x80
@@ -1047,17 +1192,17 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000   /* downstream I/O */
-				  0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc PCIE_2_A_CLK>,
 				 <&gcc PCIE_2_H_CLK>,
@@ -1081,12 +1226,17 @@
 			pinctrl-names = "default";
 
 			status = "disabled";
-			perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
-		};
+			perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
 
-		nss_common: syscon@03000000 {
-			compatible = "syscon";
-			reg = <0x03000000 0x0000FFFF>;
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		qsgmii_csr: syscon@1bb00000 {
@@ -1094,10 +1244,48 @@
 			reg = <0x1bb00000 0x000001FF>;
 		};
 
-		stmmac_axi_setup: stmmac-axi-config {
-			snps,wr_osr_lmt = <7>;
-			snps,rd_osr_lmt = <7>;
-			snps,blen = <16 0 0 0 0 0 0>;
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-ipq8064";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		lpass@28100000 {
+			compatible = "qcom,lpass-cpu";
+			status = "disabled";
+			clocks = <&lcc AHBIX_CLK>,
+					<&lcc MI2S_OSR_CLK>,
+					<&lcc MI2S_BIT_CLK>;
+			clock-names = "ahbix-clk",
+					"mi2s-osr-clk",
+					"mi2s-bit-clk";
+			interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "lpass-irq-lpaif";
+			reg = <0x28100000 0x10000>;
+			reg-names = "lpass-lpaif";
+		};
+
+		sata: sata@29000000 {
+			compatible = "qcom,ipq806x-ahci", "generic-ahci";
+			reg = <0x29000000 0x180>;
+
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc SFAB_SATA_S_H_CLK>,
+				 <&gcc SATA_H_CLK>,
+				 <&gcc SATA_A_CLK>,
+				 <&gcc SATA_RXOOB_CLK>,
+				 <&gcc SATA_PMALIVE_CLK>;
+			clock-names = "slave_iface", "iface", "core",
+					"rxoob", "pmalive";
+
+			assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
+			assigned-clock-rates = <100000000>, <100000000>;
+
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			status = "disabled";
 		};
 
 		gmac0: ethernet@37000000 {
@@ -1195,179 +1383,5 @@
 
 			status = "disabled";
 		};
-
-		hs_phy_0: phy@100f8800 {
-			compatible = "qcom,ipq806x-usb-phy-hs";
-			reg = <0x100f8800 0x30>;
-			clocks = <&gcc USB30_0_UTMI_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		ss_phy_0: phy@100f8830 {
-			compatible = "qcom,ipq806x-usb-phy-ss";
-			reg = <0x100f8830 0x30>;
-			clocks = <&gcc USB30_0_MASTER_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb3_0: usb3@100f8800 {
-			compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x100f8800 0x8000>;
-			clocks = <&gcc USB30_0_MASTER_CLK>;
-			clock-names = "core";
-
-			ranges;
-
-			resets = <&gcc USB30_0_MASTER_RESET>;
-			reset-names = "master";
-
-			status = "disabled";
-
-			dwc3_0: dwc3@10000000 {
-				compatible = "snps,dwc3";
-				reg = <0x10000000 0xcd00>;
-				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hs_phy_0>, <&ss_phy_0>;
-				phy-names = "usb2-phy", "usb3-phy";
-				dr_mode = "host";
-				snps,dis_u3_susphy_quirk;
-			};
-		};
-
-		hs_phy_1: phy@110f8800 {
-			compatible = "qcom,ipq806x-usb-phy-hs";
-			reg = <0x110f8800 0x30>;
-			clocks = <&gcc USB30_1_UTMI_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		ss_phy_1: phy@110f8830 {
-			compatible = "qcom,ipq806x-usb-phy-ss";
-			reg = <0x110f8830 0x30>;
-			clocks = <&gcc USB30_1_MASTER_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb3_1: usb3@110f8800 {
-			compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x110f8800 0x8000>;
-			clocks = <&gcc USB30_1_MASTER_CLK>;
-			clock-names = "core";
-
-			ranges;
-
-			resets = <&gcc USB30_1_MASTER_RESET>;
-			reset-names = "master";
-
-			status = "disabled";
-
-			dwc3_1: dwc3@11000000 {
-				compatible = "snps,dwc3";
-				reg = <0x11000000 0xcd00>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hs_phy_1>, <&ss_phy_1>;
-				phy-names = "usb2-phy", "usb3-phy";
-				dr_mode = "host";
-				snps,dis_u3_susphy_quirk;
-			};
-		};
-
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		sdcc1bam: dma-controller@12402000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12402000 0x8000>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC1_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		sdcc3bam: dma-controller@12182000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12182000 0x8000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC3_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		amba: amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			sdcc1: mmc@12400000 {
-				status = "disabled";
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg = <0x12400000 0x2000>;
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				max-frequency = <96000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				mmc-ddr-1_8v;
-				vmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-				dma-names = "tx", "rx";
-			};
-
-			sdcc3: mmc@12180000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x12180000 0x2000>;
-				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <192000000>;
-				sd-uhs-sdr104;
-				sd-uhs-ddr50;
-				vqmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		sfpb_mutex: hwlock@1200600 {
-			compatible = "qcom,sfpb-mutex";
-			reg = <0x01200600 0x100>;
-
-			#hwlock-cells = <1>;
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8065-smb208.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8065-smb208.dtsi
new file mode 100644
index 000000000000..803e6ff99ef8
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8065-smb208.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8065.dtsi"
+
+&rpm {
+	smb208_regulators: regulators {
+		compatible = "qcom,rpm-smb208-regulators";
+
+		smb208_s1a: s1a {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s1b: s1b {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2a: s2a {
+			regulator-min-microvolt = <775000>;
+			regulator-max-microvolt = <1275000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2b: s2b {
+			regulator-min-microvolt = <775000>;
+			regulator-max-microvolt = <1275000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8065.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8065.dtsi
new file mode 100644
index 000000000000..ea49f6cc416d
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8065.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8065";
+	compatible = "qcom,ipq8065", "qcom,ipq8064";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
new file mode 100644
index 000000000000..e3b4b93c3d38
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device Tree Source for mangOH Green Board with WP8548 Module
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "qcom-mdm9615-wp8548.dtsi"
+
+/ {
+	model = "MangOH Green with WP8548 Module";
+	compatible = "swir,mangoh-green-wp8548", "swir,wp8548", "qcom,mdm9615";
+
+	aliases {
+		spi0 = &gsbi3_spi;
+		serial0 = &gsbi4_serial;
+		serial1 = &gsbi5_serial;
+		i2c0 = &gsbi5_i2c;
+		mmc0 = &sdcc1;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&msmgpio {
+	/* MangOH GPIO Mapping :
+	 * - 2 : GPIOEXP_INT2
+	 * - 7 : IOT1_GPIO2
+	 * - 8 : IOT0_GPIO4
+	 * - 13: IOT0_GPIO3
+	 * - 21: IOT1_GPIO4
+	 * - 22: IOT2_GPIO1
+	 * - 23: IOT2_GPIO2
+	 * - 24: IOT2_GPIO3
+	 * - 25: IOT1_GPIO1
+	 * - 32: IOT1_GPIO3
+	 * - 33: IOT0_GPIO2
+	 * - 42: IOT0_GPIO1 and SD Card Detect
+	 */
+
+	gpioext1_pins: gpioext1-state {
+		gpioext1-pins {
+			pins = "gpio2";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	sdc_cd_pins: sdc-cd-state {
+		sdc-cd-pins {
+			pins = "gpio42";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&gsbi3_spi {
+	spi@0 {
+		compatible = "swir,mangoh-iotport-spi";
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+	};
+};
+
+&gsbi5_i2c {
+	mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		i2c_iot0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_iot1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_iot2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			usbhub: hub@8 {
+				compatible = "smsc,usb3503a";
+				reg = <0x8>;
+				connect-gpios = <&gpioext2 1 GPIO_ACTIVE_HIGH>;
+				intn-gpios = <&gpioext2 0 GPIO_ACTIVE_HIGH>;
+				initial-mode = <1>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			gpioext0: pinctrl@3e {
+				/* GPIO Expander 0 Mapping :
+				 * - 0: ARDUINO_RESET_Level shift
+				 * - 1: BattChrgr_PG_N
+				 * - 2: BattGauge_GPIO
+				 * - 3: LED_ON (out active high)
+				 * - 4: ATmega_reset_GPIO
+				 * - 5: X
+				 * - 6: PCM_ANALOG_SELECT (out active high)
+				 * - 7: X
+				 * - 8: Board_rev_res1 (in)
+				 * - 9: Board_rev_res2 (in)
+				 * - 10: UART_EXP1_ENn (out active low / pull-down)
+				 * - 11: UART_EXP1_IN (out pull-down)
+				 * - 12: UART_EXP2_IN (out pull-down)
+				 * - 13: SDIO_SEL (out pull-down)
+				 * - 14: SPI_EXP1_ENn (out active low / pull-down)
+				 * - 15: SPI_EXP1_IN (out pull-down)
+				 */
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1509q";
+				reg = <0x3e>;
+				interrupt-parent = <&gpioext1>;
+				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+				semtech,probe-reset;
+
+				gpio-controller;
+				interrupt-controller;
+			};
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			gpioext1: pinctrl@3f {
+				/* GPIO Expander 1 Mapping :
+				 * - 0: GPIOEXP_INT1
+				 * - 1: Battery detect
+				 * - 2: GPIO_SCF3_RESET
+				 * - 3: LED_CARD_DETECT_IOT0 (in)
+				 * - 4: LED_CARD_DETECT_IOT1 (in)
+				 * - 5: LED_CARD_DETECT_IOT2 (in)
+				 * - 6: UIM2_PWM_SELECT
+				 * - 7: UIM2_M2_S_SELECT
+				 * - 8: TP900
+				 * - 9: SENSOR_INT1 (in)
+				 * - 10: SENSOR_INT2 (in)
+				 * - 11: CARD_DETECT_IOT0 (in pull-up)
+				 * - 12: CARD_DETECT_IOT2 (in pull-up)
+				 * - 13: CARD_DETECT_IOT1 (in pull-up)
+				 * - 14: GPIOEXP_INT3 (in active low / pull-up)
+				 * - 15: BattChrgr_INT_N
+				 */
+				pinctrl-0 = <&gpioext1_pins>;
+				pinctrl-names = "default";
+
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1509q";
+				reg = <0x3f>;
+				interrupt-parent = <&msmgpio>;
+				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+				semtech,probe-reset;
+
+				gpio-controller;
+				interrupt-controller;
+			};
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			gpioext2: pinctrl@70 {
+				/* GPIO Expander 2 Mapping :
+				 * - 0: USB_HUB_INTn
+				 * - 1: HUB_CONNECT
+				 * - 2: GPIO_IOT2_RESET (out active low / pull-up)
+				 * - 3: GPIO_IOT1_RESET (out active low / pull-up)
+				 * - 4: GPIO_IOT0_RESET (out active low / pull-up)
+				 * - 5: TP901
+				 * - 6: TP902
+				 * - 7: TP903
+				 * - 8: UART_EXP2_ENn (out active low / pull-down)
+				 * - 9: PCM_EXP1_ENn (out active low)
+				 * - 10: PCM_EXP1_SEL (out)
+				 * - 11: ARD_FTDI
+				 * - 12: TP904
+				 * - 13: TP905
+				 * - 14: TP906
+				 * - 15: RS232_Enable (out active high / pull-up)
+				 */
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1509q";
+				reg = <0x70>;
+				interrupt-parent = <&gpioext1>;
+				interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+
+				semtech,probe-reset;
+
+				gpio-controller;
+				interrupt-controller;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&sdcc1 {
+	pinctrl-0 = <&sdc_cd_pins>;
+	pinctrl-names = "default";
+	disable-wp;
+	cd-gpios = <&msmgpio 42 GPIO_ACTIVE_LOW>; /* Active low CD */
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
new file mode 100644
index 000000000000..0dd52cac0e2e
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device Tree Source for Sierra Wireless WP8548 Module
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "qcom-mdm9615.dtsi"
+#include "pm8018.dtsi"
+
+/ {
+	model = "Sierra Wireless WP8548 Module";
+	compatible = "swir,wp8548", "qcom,mdm9615";
+
+	memory@48000000 {
+		device_type = "memory";
+		reg = <0x48000000 0x7F00000>;
+	};
+};
+
+&msmgpio {
+	pinctrl-0 = <&reset_out_pins>;
+	pinctrl-names = "default";
+
+	gsbi3_pins: gsbi3-state {
+		gsbi3-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "gsbi3";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	gsbi4_pins: gsbi4-state {
+		gsbi4-pins {
+			pins = "gpio12", "gpio13", "gpio14", "gpio15";
+			function = "gsbi4";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	gsbi5_i2c_pins: gsbi5-i2c-state {
+		sda-pins {
+			pins = "gpio16";
+			function = "gsbi5_i2c";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		scl-pins {
+			pins = "gpio17";
+			function = "gsbi5_i2c";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	gsbi5_uart_pins: gsbi5-uart-state {
+		gsbi5-uart-pins {
+			pins = "gpio18", "gpio19";
+			function = "gsbi5_uart";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	reset_out_pins: reset-out-state {
+		reset-out-pins {
+			pins = "gpio66";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+			output-high;
+		};
+	};
+};
+
+&pm8018 {
+	interrupts-extended = <&intc GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pm8018_gpio {
+	usb_vbus_5v_pins: usb-vbus-5v-state {
+		pins = "gpio4";
+		function = "normal";
+		output-high;
+		bias-disable;
+		qcom,drive-strength = <1>;
+		power-source = <2>;
+	};
+};
+
+&gsbi3 {
+	status = "okay";
+	qcom,mode = <GSBI_PROT_SPI>;
+};
+
+&gsbi3_spi {
+	status = "okay";
+	pinctrl-0 = <&gsbi3_pins>;
+	pinctrl-names = "default";
+	assigned-clocks = <&gcc GSBI3_QUP_CLK>;
+	assigned-clock-rates = <24000000>;
+};
+
+&gsbi4 {
+	status = "okay";
+	qcom,mode = <GSBI_PROT_UART_W_FC>;
+};
+
+&gsbi4_serial {
+	status = "okay";
+	pinctrl-0 = <&gsbi4_pins>;
+	pinctrl-names = "default";
+};
+
+&gsbi5 {
+	status = "okay";
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+};
+
+&gsbi5_i2c {
+	status = "okay";
+	clock-frequency = <200000>;
+	pinctrl-0 = <&gsbi5_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&gsbi5_serial {
+	status = "okay";
+	pinctrl-0 = <&gsbi5_uart_pins>;
+	pinctrl-names = "default";
+};
+
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8018-regulators";
+
+		vin_lvs1-supply = <&pm8018_s3>;
+
+		vdd_l7-supply = <&pm8018_s4>;
+		vdd_l8-supply = <&pm8018_s3>;
+		vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
+
+		/* Buck SMPS */
+		pm8018_s1: s1 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s2: s2 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s3: s3 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s4: s4 {
+			regulator-min-microvolt = <2100000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s5: s5 {
+			regulator-always-on;
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1350000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* PMOS LDO */
+		pm8018_l2: l2 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8018_l3: l3 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8018_l4: l4 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		pm8018_l5: l5 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8018_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8018_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		pm8018_l8: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8018_l9: l9 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8018_l10: l10 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l11: l11 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l12: l12 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l13: l13 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8018_l14: l14 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		pm8018_lvs1: lvs1 {
+			bias-pull-down;
+		};
+	};
+};
+
+&sdcc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
new file mode 100644
index 000000000000..7de8d6c55016
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device Tree Source for Qualcomm MDM9615 SoC
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-mdm9615.h>
+#include <dt-bindings/clock/qcom,lcc-msm8960.h>
+#include <dt-bindings/reset/qcom,gcc-mdm9615.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm MDM9615";
+	compatible = "qcom,mdm9615";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	clocks {
+		cxo_board: cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+	};
+
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		l2: cache-controller@2040000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x02040000 0x1000>;
+			arm,data-latency = <2 2 0>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-wdt-mdm9615", "qcom,kpss-timer",
+				     "qcom,msm-timer";
+			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>;
+			cpu-offset = <0x80000>;
+		};
+
+		msmgpio: pinctrl@800000 {
+			compatible = "qcom,mdm9615-pinctrl";
+			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 88>;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x800000 0x4000>;
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-mdm9615";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+			clocks = <&cxo_board>,
+				 <&lcc PLL4>;
+		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-mdm9615";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&cxo_board>,
+				 <&gcc PLL4_VOTE>,
+				 <0>,
+				 <0>, <0>,
+				 <0>, <0>,
+				 <0>;
+			clock-names = "cxo",
+				      "pll4_vote",
+				      "mi2s_codec_clk",
+				      "codec_i2s_mic_codec_clk",
+				      "spare_i2s_mic_codec_clk",
+				      "codec_i2s_spkr_codec_clk",
+				      "spare_i2s_spkr_codec_clk",
+				      "pcm_codec_clk";
+		};
+
+		l2cc: clock-controller@2011000 {
+			compatible = "qcom,kpss-gcc-mdm9615", "qcom,kpss-gcc", "syscon";
+			reg = <0x02011000 0x1000>;
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+			assigned-clocks = <&gcc PRNG_CLK>;
+			assigned-clock-rates = <32000000>;
+		};
+
+		gsbi2: gsbi@16100000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <2>;
+			reg = <0x16100000 0x100>;
+			clocks = <&gcc GSBI2_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi2_i2c: i2c@16180000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16180000 0x1000>;
+				interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi3: gsbi@16200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <3>;
+			reg = <0x16200000 0x100>;
+			clocks = <&gcc GSBI3_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi3_spi: spi@16280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16280000 0x1000>;
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi4: gsbi@16300000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <4>;
+			reg = <0x16300000 0x100>;
+			clocks = <&gcc GSBI4_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi4_serial: serial@16340000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16340000 0x1000>,
+				      <0x16300000 0x1000>;
+				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi5: gsbi@16400000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x16400000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi5_i2c: i2c@16480000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16480000 0x1000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+				/* QUP clock is not initialized, set rate */
+				assigned-clocks = <&gcc GSBI5_QUP_CLK>;
+				assigned-clock-rates = <24000000>;
+
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi5_serial: serial@16440000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16440000 0x1000>,
+				      <0x16400000 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		ssbi: ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		sdcc1bam: dma-controller@12182000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x8000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc2bam: dma-controller@12142000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12142000 0x8000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC2_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc1: mmc@12180000 {
+			status = "disabled";
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			reg = <0x12180000 0x2000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <8>;
+			max-frequency = <48000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			vmmc-supply = <&vsdcc_fixed>;
+			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+			dma-names = "tx", "rx";
+			assigned-clocks = <&gcc SDC1_CLK>;
+			assigned-clock-rates = <400000>;
+		};
+
+		sdcc2: mmc@12140000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x12140000 0x2000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <48000000>;
+			no-1-8-v;
+			vmmc-supply = <&vsdcc_fixed>;
+			dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
+			dma-names = "tx", "rx";
+			assigned-clocks = <&gcc SDC2_CLK>;
+			assigned-clock-rates = <400000>;
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-mdm9615", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-mdm9615";
+			reg = <0x108000 0x1000>;
+
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ack", "err", "wakeup";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
new file mode 100644
index 000000000000..d4a32af0ef8f
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common Board Device Tree for Microsoft MSM8x26-based Lumias
+ *
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/*
+ * The .dts should first include qcom-msm8226.dtsi or msm8926.dtsi depending on
+ * the SoC on the given device.
+ */
+
+#include "pm8226.dtsi"
+#include <dt-bindings/input/input.h>
+
+/*
+ * Delete all generic (msm8226.dtsi) reserved
+ * memory mappings which are different on these devices.
+ */
+/delete-node/ &smem_region;
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* microSD */
+		display0 = &framebuffer;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = "display0";
+
+		framebuffer: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x3200000 0x800000>;
+			format = "a8r8g8b8";
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 4)>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_BYTE0_CLK>,
+				 <&mmcc MDSS_MDP_CLK>,
+				 <&mmcc MDSS_PCLK0_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>;
+			power-domains = <&mmcc MDSS_GDSC>;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	/*
+	 * This device being a WP platform has a different
+	 * memory layout than other Android based devices.
+	 * This smem memory region is directly copied from
+	 * the original UEFI firmware.
+	 */
+	reserved-memory {
+		display_reserved: framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	magnetometer: magnetometer@c {
+		compatible = "asahi-kasei,ak09911";
+		reg = <0x0c>;
+
+		vdd-supply = <&pm8226_l15>;
+		vid-supply = <&pm8226_l6>;
+	};
+
+	accelerometer: accelerometer@1e {
+		compatible = "kionix,kx022-1020";
+		reg = <0x1e>;
+
+		interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8226_l15>;
+		vddio-supply = <&pm8226_l6>;
+
+		mount-matrix = "1",  "0",  "0",
+			       "0", "-1",  "0",
+			       "0",  "0",  "1";
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen: touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l6>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&pm8226_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		/* These values were taken from the original firmware DSDT */
+		pm8226_s1: s1 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2100000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2075000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	status = "okay";
+};
+
+&smbb {
+	status = "okay";
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio106", "gpio107", "gpio108";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		irq-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		reset-pins {
+			pins = "gpio16";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts
new file mode 100644
index 000000000000..f448c9088416
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+	model = "Microsoft Lumia 640";
+	compatible = "microsoft,dempsey", "qcom,msm8226";
+	chassis-type = "handset";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts
new file mode 100644
index 000000000000..94bf3b1ad1bd
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+	model = "Microsoft Lumia 640 XL";
+	compatible = "microsoft,makepeace", "qcom,msm8226";
+	chassis-type = "handset";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts
new file mode 100644
index 000000000000..d8cdb75dfbb8
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/* This device has no magnetometer */
+/delete-node/ &magnetometer;
+
+/ {
+	model = "Nokia Lumia 630";
+	compatible = "microsoft,moneypenny", "qcom,msm8226";
+	chassis-type = "handset";
+};
+
+&framebuffer {
+	width = <480>;
+	height = <854>;
+	stride = <(480 * 4)>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
new file mode 100644
index 000000000000..f1544a7e8369
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
@@ -0,0 +1,470 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
+ */
+
+/*
+ * The .dts should first include qcom-msm8226.dtsi or msm8926.dtsi depending on
+ * the SoC on the given device.
+ */
+
+#include <dt-bindings/input/input.h>
+#include "pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &mba_region;
+/delete-node/ &mpss_region;
+/delete-node/ &smem_region;
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		display0 = &framebuffer0;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = "display0";
+
+		framebuffer0: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <1280>;
+			height = <800>;
+			stride = <(1280 * 3)>;
+			format = "r8g8b8";
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 110 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-home {
+			label = "Home";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	i2c-backlight {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&backlight_i2c_default_state>;
+		pinctrl-names = "default";
+
+		i2c-gpio,delay-us = <4>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		backlight@2c {
+			compatible = "ti,lp8556";
+			reg = <0x2c>;
+
+			dev-ctrl = /bits/ 8 <0x80>;
+			init-brt = /bits/ 8 <0x3f>;
+
+			pwms = <&backlight_pwm 0 100000>;
+			pwm-names = "lp8556";
+
+			rom-a0h {
+				rom-addr = /bits/ 8 <0xa0>;
+				rom-val = /bits/ 8 <0x44>;
+			};
+
+			rom-a1h {
+				rom-addr = /bits/ 8 <0xa1>;
+				rom-val = /bits/ 8 <0x6c>;
+			};
+
+			rom-a5h {
+				rom-addr = /bits/ 8 <0xa5>;
+				rom-val = /bits/ 8 <0x24>;
+			};
+		};
+	};
+
+	backlight_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+		clocks = <&mmcc CAMSS_GP0_CLK>;
+		pinctrl-0 = <&backlight_pwm_default_state>;
+		pinctrl-names = "default";
+	};
+
+	reg_tsp_1p8v: regulator-tsp-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_1p8v";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en_default_state>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8400000 {
+			reg = <0x08400000 0x1f00000>;
+			no-map;
+		};
+
+		mba_region: mba@a300000 {
+			reg = <0x0a300000 0x100000>;
+			no-map;
+		};
+
+		reserved@cb00000 {
+			reg = <0x0cb00000 0x700000>;
+			no-map;
+		};
+
+		wcnss@d200000 {
+			reg = <0x0d200000 0x700000>;
+			no-map;
+		};
+
+		adsp_region: adsp@d900000 {
+			reg = <0x0d900000 0x1800000>;
+			no-map;
+		};
+
+		venus@f100000 {
+			reg = <0x0f100000 0x500000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		reserved@fb00000 {
+			reg = <0x0fb00000 0x260000>;
+			no-map;
+		};
+
+		rfsa@fd60000 {
+			reg = <0x0fd60000 0x20000>;
+			no-map;
+		};
+
+		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0fd80000 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+};
+
+&adsp {
+	status = "okay";
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	muic: usb-switch@25 {
+		compatible = "siliconmitus,sm5502-muic";
+		reg = <0x25>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&muic_int_default_state>;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&modem {
+	mx-supply = <&pm8226_l3>;
+	pll-supply = <&pm8226_l8>;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-always-on;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default_state: accel-int-default-state {
+		pins = "gpio54";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	backlight_i2c_default_state: backlight-i2c-default-state {
+		pins = "gpio20", "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	backlight_pwm_default_state: backlight-pwm-default-state {
+		pins = "gpio33";
+		function = "gp0_clk";
+	};
+
+	muic_int_default_state: muic-int-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default_state: tsp-en-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_rst_default_state: tsp-int-rst-default-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <10>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
new file mode 100644
index 000000000000..08b50dc63923
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+	model = "Samsung Galaxy Grand 2";
+	compatible = "samsung,ms013g", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		serial0 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-home {
+			label = "Home Key";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	reg_motor_vdd: regulator-motor-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "motor_vdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 111 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&motor_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_vdd_tsp_a: regulator-vdd-tsp-a {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tsp_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reserved-memory {
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+	};
+
+	vibrator {
+		compatible = "regulator-haptic";
+		haptic-supply = <&reg_motor_vdd>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	accelerometer@18 {
+		compatible = "bosch,bma255";
+		reg = <0x18>;
+		interrupts-extended = <&tlmm 64 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8226_l19>;
+		vddio-supply = <&pm8226_lvs1>;
+
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+
+		mount-matrix = "0", "1", "0",
+			       "-1", "0", "0",
+			       "0", "0", "-1";
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "zinitix,bt541";
+
+		reg = <0x20>;
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		vcca-supply = <&reg_vdd_tsp_a>;
+		vdd-supply = <&pm8226_lvs1>;
+
+		pinctrl-0 = <&tsp_int_default>;
+		pinctrl-names = "default";
+
+		linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&sdhc2_default_state &sdhc2_cd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio50";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio106", "gpio107", "gpio108";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	motor_en_default: motor-en-default-state {
+		pins = "gpio111";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdhc2_cd_default: sdhc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default: tsp-en-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_default: tsp-int-default-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-s3ve3g.dts
index d159188c8b95..288cacd5d1fa 100644
--- a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-s3ve3g.dts
@@ -8,6 +8,7 @@
 / {
 	model = "Samsung Galaxy S III Neo";
 	compatible = "samsung,s3ve3g", "qcom,msm8226";
+	chassis-type = "handset";
 
 	aliases {
 		serial0 = &blsp1_uart3;
@@ -18,8 +19,6 @@
 	};
 };
 
-&soc {
-	serial@f991f000 {
-		status = "ok";
-	};
+&blsp1_uart3 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
new file mode 100644
index 000000000000..51a7a3fb36d8
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -0,0 +1,1488 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
+#include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,gcc-msm8974.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,msm8226-smp";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&l2>;
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,msm8226-smp";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&l2>;
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,msm8226-smp";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&l2>;
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,msm8226-smp";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&l2>;
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8226", "qcom,scm";
+			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+		};
+
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+		};
+
+		opp-787200000 {
+			opp-hz = /bits/ 64 <787200000>;
+		};
+
+		/* Higher CPU frequencies need speedbin support */
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
+					 IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8226-rpm-proc", "qcom,rpm-proc";
+
+		master-stats {
+			compatible = "qcom,rpm-master-stats";
+			qcom,rpm-msg-ram = <&apss_master_stats>,
+					   <&mpss_master_stats>,
+					   <&lpss_master_stats>,
+					   <&pronto_master_stats>;
+			qcom,master-names = "APSS",
+					    "MPSS",
+					    "LPSS",
+					    "PRONTO";
+		};
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apcs 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8226", "qcom,smd-rpm";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8226", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8226-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <1>;
+						};
+						rpmpd_opp_svs_krait: opp2 {
+							opp-level = <2>;
+						};
+						rpmpd_opp_svs_soc: opp3 {
+							opp-level = <3>;
+						};
+						rpmpd_opp_nom: opp4 {
+							opp-level = <4>;
+						};
+						rpmpd_opp_turbo: opp5 {
+							opp-level = <5>;
+						};
+						rpmpd_opp_super_turbo: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smem_region: smem@3000000 {
+			reg = <0x3000000 0x100000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8000000 {
+			reg = <0x08000000 0x5100000>;
+			no-map;
+			status = "disabled";
+		};
+
+		mba_region: mba@d100000 {
+			reg = <0x0d100000 0x100000>;
+			no-map;
+			status = "disabled";
+		};
+
+		adsp_region: adsp@dc00000 {
+			reg = <0x0dc00000 0x1900000>;
+			no-map;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+
+		memory-region = <&smem_region>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mboxes = <0>, <&apcs 13>, <&apcs 9>, <&apcs 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smsm: modem@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		adsp_smsm: adsp@2 {
+			reg = <2>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@7 {
+			reg = <7>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0xf9000000 0x1000>,
+			      <0xf9002000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apcs: mailbox@f9011000 {
+			compatible = "qcom,msm8226-apcs-kpss-global",
+				     "qcom,msm8916-apcs-kpss-global", "syscon";
+			reg = <0xf9011000 0x1000>;
+			#mbox-cells = <1>;
+			clocks = <&a7pll>, <&gcc GPLL0_VOTE>;
+			clock-names = "pll", "aux";
+			#clock-cells = <0>;
+		};
+
+		a7pll: clock@f9016000 {
+			compatible = "qcom,msm8226-a7pll";
+			reg = <0xf9016000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo_board>;
+			clock-names = "xo";
+			operating-points-v2 = <&a7pll_opp_table>;
+
+			a7pll_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-768000000 {
+					opp-hz = /bits/ 64 <768000000>;
+				};
+
+				opp-787200000 {
+					opp-hz = /bits/ 64 <787200000>;
+				};
+
+				opp-998400000 {
+					opp-hz = /bits/ 64 <998400000>;
+				};
+
+				opp-1094400000 {
+					opp-hz = /bits/ 64 <1094400000>;
+				};
+
+				opp-1190400000 {
+					opp-hz = /bits/ 64 <1190400000>;
+				};
+
+				opp-1305600000 {
+					opp-hz = /bits/ 64 <1305600000>;
+				};
+
+				opp-1344000000 {
+					opp-hz = /bits/ 64 <1344000000>;
+				};
+
+				opp-1401600000 {
+					opp-hz = /bits/ 64 <1401600000>;
+				};
+
+				opp-1497600000 {
+					opp-hz = /bits/ 64 <1497600000>;
+				};
+
+				opp-1593600000 {
+					opp-hz = /bits/ 64 <1593600000>;
+				};
+
+				opp-1689600000 {
+					opp-hz = /bits/ 64 <1689600000>;
+				};
+
+				opp-1785600000 {
+					opp-hz = /bits/ 64 <1785600000>;
+				};
+			};
+		};
+
+		saw_l2: power-manager@f9012000 {
+			compatible = "qcom,msm8226-saw2-v2.1-l2", "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+		};
+
+		watchdog@f9017000 {
+			compatible = "qcom,apss-wdt-msm8226", "qcom,kpss-wdt";
+			reg = <0xf9017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@f9020000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		acc0: power-manager@f9088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw0: power-manager@f9089000 {
+			compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9089000 0x1000>;
+		};
+
+		acc1: power-manager@f9098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw1: power-manager@f9099000 {
+			compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9099000 0x1000>;
+		};
+
+		acc2: power-manager@f90a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw2: power-manager@f90a9000 {
+			compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90a9000 0x1000>;
+		};
+
+		acc3: power-manager@f90b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw3: power-manager@f90b9000 {
+			compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90b9000 0x1000>;
+		};
+
+		sdhc_1: mmc@f9824900 {
+			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc1_default_state>;
+			status = "disabled";
+		};
+
+		sdhc_3: mmc@f9864900 {
+			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
+				 <&gcc GCC_SDCC3_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc3_default_state>;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@f98a4900 {
+			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc2_default_state>;
+			status = "disabled";
+		};
+
+		blsp1_uart1: serial@f991d000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991d000 0x1000>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@f991e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991e000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart3: serial@f991f000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991f000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart4: serial@f9920000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf9920000 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_i2c1: i2c@f9923000 {
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9923000 0x1000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c1_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@f9924000 {
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9924000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c2_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@f9925000 {
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9925000 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c3_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c4: i2c@f9926000 {
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9926000 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c4_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c5: i2c@f9927000 {
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9927000 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c5_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c6: i2c@f9928000 {
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9928000 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			pinctrl-0 = <&blsp1_i2c6_pins>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@f9a55000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0xf9a55000 0x200>,
+			      <0xf9a55200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <75000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			hnp-disable;
+			srp-disable;
+			adp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs_phy: phy {
+					compatible = "qcom,usb-hs-phy-msm8226",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+						 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+					reset-names = "phy", "por";
+					qcom,init-seq = /bits/ 8 <0x0 0x44
+						0x1 0x68 0x2 0x24 0x3 0x13>;
+				};
+			};
+		};
+
+		rng@f9bff000 {
+			compatible = "qcom,prng";
+			reg = <0xf9bff000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		sram@fc190000 {
+			compatible = "qcom,msm8226-rpm-stats";
+			reg = <0xfc190000 0x10000>;
+		};
+
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8226";
+			reg = <0xfc400000 0x4000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			clocks = <&xo_board>,
+				 <&sleep_clk>;
+			clock-names = "xo",
+				      "sleep_clk";
+		};
+
+		rpm_msg_ram: sram@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xfc428000 0x4000>;
+
+			apss_master_stats: sram@150 {
+				reg = <0x150 0x14>;
+			};
+
+			mpss_master_stats: sram@b50 {
+				reg = <0xb50 0x14>;
+			};
+
+			lpss_master_stats: sram@1550 {
+				reg = <0x1550 0x14>;
+			};
+
+			pronto_master_stats: sram@1f50 {
+				reg = <0x1f50 0x14>;
+			};
+		};
+
+		tsens: thermal-sensor@fc4a9000 {
+			compatible = "qcom,msm8226-tsens", "qcom,tsens-v0_1";
+			reg = <0xfc4a9000 0x1000>, /* TM */
+			      <0xfc4a8000 0x1000>; /* SROT */
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2";
+			#qcom,sensors = <6>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		qfprom: efuse@fc4bc000 {
+			compatible = "qcom,msm8226-qfprom", "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@1c1 {
+				reg = <0x1c1 0x2>;
+				bits = <5 8>;
+			};
+
+			tsens_s0_p1: s0-p1@1c2 {
+				reg = <0x1c2 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s1_p1: s1-p1@1c4 {
+				reg = <0x1c4 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s2_p1: s2-p1@1c4 {
+				reg = <0x1c4 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s3_p1: s3-p1@1c5 {
+				reg = <0x1c5 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s4_p1: s4-p1@1c6 {
+				reg = <0x1c6 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s5_p1: s5-p1@1c7 {
+				reg = <0x1c7 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s6_p1: s6-p1@1ca {
+				reg = <0x1ca 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_base2: base2@1cc {
+				reg = <0x1cc 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s0_p2: s0-p2@1cd {
+				reg = <0x1cd 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s1_p2: s1-p2@1cd {
+				reg = <0x1cd 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s2_p2: s2-p2@1ce {
+				reg = <0x1ce 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p2: s3-p2@1cf {
+				reg = <0x1cf 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s4_p2: s4-p2@446 {
+				reg = <0x446 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s5_p2: s5-p2@447 {
+				reg = <0x447 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s6_p2: s6-p2@44e {
+				reg = <0x44e 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_mode: mode@44f {
+				reg = <0x44f 0x1>;
+				bits = <5 3>;
+			};
+		};
+
+		spmi_bus: spmi@fc4cf000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg-names = "core", "intr", "cnfg";
+			reg = <0xfc4cf000 0x1000>,
+			      <0xfc4cb000 0x1000>,
+			      <0xfc4ca000 0x1000>;
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		bam_dmux_dma: dma-controller@fc834000 {
+			compatible = "qcom,bam-v1.4.0";
+			reg = <0xfc834000 0x7000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+		};
+
+		modem: remoteproc@fc880000 {
+			compatible = "qcom,msm8226-mss-pil";
+			reg = <0xfc880000 0x4040>,
+			      <0xfc820000 0x10000>;
+			reg-names = "qdsp6",
+				    "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface",
+				      "bus",
+				      "mem",
+				      "xo";
+
+			resets = <&gcc GCC_MSS_RESTART>;
+			reset-names = "mss_restart";
+
+			power-domains = <&rpmpd MSM8226_VDDCX>;
+			power-domain-names = "cx";
+
+			qcom,ext-bhs-reg = <&tcsr_regs_1 0x194>;
+			qcom,halt-regs = <&tcsr_regs_1 0x180 0x200 0x280>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			memory-region = <&mba_region>, <&mpss_region>;
+
+			status = "disabled";
+
+			bam_dmux: bam-dmux {
+				compatible = "qcom,bam-dmux";
+
+				interrupt-parent = <&modem_smsm>;
+				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+				interrupt-names = "pc", "pc-ack";
+
+				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+				qcom,smem-state-names = "pc", "pc-ack";
+
+				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+				dma-names = "tx", "rx";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&apcs 12>;
+				qcom,smd-edge = <0>;
+
+				label = "modem";
+			};
+		};
+
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex";
+			reg = <0xfd484000 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr_regs_1: syscon@fd485000 {
+			compatible = "qcom,tcsr-msm8226", "syscon";
+			reg = <0xfd485000 0x1000>;
+		};
+
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,msm8226-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 117>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			blsp1_i2c1_pins: blsp1-i2c1-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_pins: blsp1-i2c2-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_pins: blsp1-i2c3-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_pins: blsp1-i2c4-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c5_pins: blsp1-i2c5-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c6_pins: blsp1-i2c6-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cci_default: cci-default-state {
+				pins = "gpio29", "gpio30";
+				function = "cci_i2c0";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cci_sleep: cci-sleep-state {
+				pins = "gpio29", "gpio30";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdhc1_default_state: sdhc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
+
+				cmd-data-pins {
+					pins = "sdc1_cmd", "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdhc2_default_state: sdhc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
+
+				cmd-data-pins {
+					pins = "sdc2_cmd", "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdhc3_default_state: sdhc3-default-state {
+				clk-pins {
+					pins = "gpio44";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "gpio43";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "gpio39", "gpio40", "gpio41", "gpio42";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		mmcc: clock-controller@fd8c0000 {
+			compatible = "qcom,mmcc-msm8226";
+			reg = <0xfd8c0000 0x6000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_MMSS_GPLL0_CLK_SRC>,
+				 <&gcc GPLL0_VOTE>,
+				 <&gcc GPLL1_VOTE>,
+				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>;
+			clock-names = "xo",
+				      "mmss_gpll0_vote",
+				      "gpll0_vote",
+				      "gpll1_vote",
+				      "gfx3d_clk_src",
+				      "dsi0pll",
+				      "dsi0pllbyte";
+		};
+
+		mdss: display-subsystem@fd900000 {
+			compatible = "qcom,mdss";
+			reg = <0xfd900000 0x100>, <0xfd924000 0x1000>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@fd900000 {
+				compatible = "qcom,msm8226-mdp5", "qcom,mdp5";
+				reg = <0xfd900100 0x22000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_mdp_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@fd922800 {
+				compatible = "qcom,msm8226-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0xfd922800 0x1f8>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+						  <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_BYTE0_CLK>,
+					 <&mmcc MDSS_PCLK0_CLK>,
+					 <&mmcc MDSS_ESC0_CLK>,
+					 <&mmcc MMSS_MISC_AHB_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core",
+					      "core_mmss";
+
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdss_mdp_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@fd922a00 {
+				compatible = "qcom,dsi-phy-28nm-8226";
+				reg = <0xfd922a00 0xd4>,
+				      <0xfd922b00 0x280>,
+				      <0xfd922d80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface",
+					      "ref";
+			};
+		};
+
+		cci: cci@fda0c000 {
+			compatible = "qcom,msm8226-cci";
+			reg = <0xfda0c000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci_default>;
+			pinctrl-1 = <&cci_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gpu: gpu@fdb00000 {
+			compatible = "qcom,adreno-305.18", "qcom,adreno";
+			reg = <0xfdb00000 0x10000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+
+			clocks = <&mmcc OXILI_GFX3D_CLK>,
+				 <&mmcc OXILICX_AHB_CLK>,
+				 <&mmcc OXILICX_AXI_CLK>;
+			clock-names = "core", "iface", "mem_iface";
+
+			sram = <&gmu_sram>;
+			power-domains = <&mmcc OXILICX_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
+				};
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+				};
+
+				opp-19000000 {
+					opp-hz = /bits/ 64 <19000000>;
+				};
+			};
+		};
+
+		sram@fdd00000 {
+			compatible = "qcom,msm8226-ocmem";
+			reg = <0xfdd00000 0x2000>,
+			      <0xfec00000 0x20000>;
+			reg-names = "ctrl", "mem";
+			ranges = <0 0xfec00000 0x20000>;
+			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>;
+			clock-names = "core";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gmu_sram: gmu-sram@0 {
+				reg = <0x0 0x20000>;
+			};
+		};
+
+		adsp: remoteproc@fe200000 {
+			compatible = "qcom,msm8226-adsp-pil";
+			reg = <0xfe200000 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8226_VDDCX>;
+			power-domain-names = "cx";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_region>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			smd-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&apcs 8>;
+				qcom,smd-edge = <1>;
+
+				label = "lpass";
+			};
+		};
+
+		sram@fe805000 {
+			compatible = "qcom,msm8226-imem", "syscon", "simple-mfd";
+			reg = <0xfe805000 0x1000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x65c>;
+
+				mode-bootloader = <0x77665500>;
+				mode-normal = <0x77665501>;
+				mode-recovery = <0x77665502>;
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 2
+				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3
+				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4
+				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1
+				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
new file mode 100644
index 000000000000..69fe651f564d
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/input.h>
+
+#include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
+
+/ {
+	model = "Qualcomm MSM8660 SURF";
+	compatible = "qcom,msm8660-surf", "qcom,msm8660";
+
+	aliases {
+		serial0 = &gsbi12_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* Temporary fixed regulator */
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
+	};
+};
+
+&gsbi12 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi12_serial {
+	status = "okay";
+};
+
+&pm8058 {
+	interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8058_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_FN_F1)
+		MATRIX_KEY(0, 1, KEY_UP)
+		MATRIX_KEY(0, 2, KEY_LEFT)
+		MATRIX_KEY(0, 3, KEY_VOLUMEUP)
+		MATRIX_KEY(1, 0, KEY_FN_F2)
+		MATRIX_KEY(1, 1, KEY_RIGHT)
+		MATRIX_KEY(1, 2, KEY_DOWN)
+		MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
+		MATRIX_KEY(2, 3, KEY_ENTER)
+		MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
+		MATRIX_KEY(4, 1, KEY_UP)
+		MATRIX_KEY(4, 2, KEY_LEFT)
+		MATRIX_KEY(4, 3, KEY_HOME)
+		MATRIX_KEY(4, 4, KEY_FN_F3)
+		MATRIX_KEY(5, 0, KEY_CAMERA)
+		MATRIX_KEY(5, 1, KEY_RIGHT)
+		MATRIX_KEY(5, 2, KEY_DOWN)
+		MATRIX_KEY(5, 3, KEY_BACK)
+		MATRIX_KEY(5, 4, KEY_MENU)
+		>;
+	keypad,num-rows = <6>;
+	keypad,num-columns = <5>;
+};
+
+&rpm {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8901-regulators";
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8058-regulators";
+	};
+};
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&vsdcc_fixed>;
+	status = "okay";
+};
+
+/* External micro SD card */
+&sdcc3 {
+	vmmc-supply = <&vsdcc_fixed>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
new file mode 100644
index 000000000000..3f69b98d0041
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -0,0 +1,434 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8660.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm MSM8660";
+	compatible = "qcom,msm8660";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "qcom,scorpion";
+			enable-method = "qcom,gcc-msm8660";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,scorpion";
+			enable-method = "qcom,gcc-msm8660";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	cpu-pmu {
+		compatible = "qcom,scorpion-mp-pmu";
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	clocks {
+		cxo_board: cxo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "cxo_board";
+		};
+
+		pxo_board: pxo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+			clock-output-names = "pxo_board";
+		};
+
+		sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@2080000 {
+			compatible = "qcom,msm-8660-qgic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = < 0x02080000 0x1000 >,
+			      < 0x02081000 0x1000 >;
+		};
+
+		timer@2000000 {
+			compatible = "qcom,scss-timer", "qcom,msm-timer";
+			interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+			reg = <0x02000000 0x100>;
+			clock-frequency = <27000000>;
+			cpu-offset = <0x40000>;
+		};
+
+		tlmm: pinctrl@800000 {
+			compatible = "qcom,msm8660-pinctrl";
+			reg = <0x800000 0x4000>;
+
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 173>;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-msm8660";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+			clocks = <&pxo_board>, <&cxo_board>;
+			clock-names = "pxo", "cxo";
+		};
+
+		gsbi1: gsbi@16000000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x16000000 0x100>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			status = "disabled";
+
+			gsbi1_spi: spi@16080000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x16080000 0x1000>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi3: gsbi@16200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x16200000 0x100>;
+			clocks = <&gcc GSBI3_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+			status = "disabled";
+
+			gsbi3_i2c: i2c@16280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16280000 0x1000>;
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi6: gsbi@16500000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x16500000 0x100>;
+			clocks = <&gcc GSBI6_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi6_serial: serial@16540000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16540000 0x1000>,
+				      <0x16500000 0x1000>;
+				interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi6_i2c: i2c@16580000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16580000 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi7: gsbi@16600000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x16600000 0x100>;
+			clocks = <&gcc GSBI7_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi7_serial: serial@16640000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16640000 0x1000>,
+				      <0x16600000 0x1000>;
+				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi7_i2c: i2c@16680000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16680000 0x1000>;
+				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi8: gsbi@19800000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x19800000 0x100>;
+			clocks = <&gcc GSBI8_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+			status = "disabled";
+
+			gsbi8_i2c: i2c@19880000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x19880000 0x1000>;
+				interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi12: gsbi@19c00000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x19c00000 0x100>;
+			clocks = <&gcc GSBI12_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi12_serial: serial@19c40000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x19c40000 0x1000>,
+				      <0x19c00000 0x1000>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi12_i2c: i2c@19c80000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x19c80000 0x1000>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		ebi2: external-bus@1a100000 {
+			compatible = "qcom,msm8660-ebi2";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x1a800000 0x00800000>,
+				 <1 0x0 0x1b000000 0x00800000>,
+				 <2 0x0 0x1b800000 0x00800000>,
+				 <3 0x0 0x1d000000 0x08000000>,
+				 <4 0x0 0x1c800000 0x00800000>,
+				 <5 0x0 0x1c000000 0x00800000>;
+			reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
+			reg-names = "ebi2", "xmem";
+			clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
+			clock-names = "ebi2x", "ebi2";
+			status = "disabled";
+		};
+
+		ssbi: ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		l2cc: clock-controller@2082000 {
+			compatible = "qcom,kpss-gcc-msm8660", "qcom,kpss-gcc", "syscon";
+			reg = <0x02082000 0x1000>;
+		};
+
+		rpm: rpm@104000 {
+			compatible = "qcom,rpm-msm8660";
+			reg = <0x00104000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ack", "err", "wakeup";
+			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
+			clock-names = "ram";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc";
+				#clock-cells = <1>;
+				clocks = <&pxo_board>;
+				clock-names = "pxo";
+			};
+		};
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			sdcc1: mmc@12400000 {
+				status = "disabled";
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg = <0x12400000 0x8000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				max-frequency = <48000000>;
+				non-removable;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+			};
+
+			sdcc2: mmc@12140000 {
+				status = "disabled";
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg = <0x12140000 0x8000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				max-frequency = <48000000>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+			};
+
+			sdcc3: mmc@12180000 {
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status = "disabled";
+				reg = <0x12180000 0x8000>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <48000000>;
+				no-1-8-v;
+			};
+
+			sdcc4: mmc@121c0000 {
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status = "disabled";
+				reg = <0x121c0000 0x8000>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
+				max-frequency = <48000000>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+			};
+
+			sdcc5: mmc@12200000 {
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status = "disabled";
+				reg = <0x12200000 0x8000>;
+				interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <48000000>;
+			};
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-msm8660", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+	};
+
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-e5.dts b/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-e5.dts
new file mode 100644
index 000000000000..c8d34de8a71e
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-e5.dts
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "arm64/qcom/msm8916-samsung-e5.dts"
+#include "qcom-msm8916-smp.dtsi"
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-e7.dts b/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-e7.dts
new file mode 100644
index 000000000000..85be286c8608
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-e7.dts
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "arm64/qcom/msm8916-samsung-e7.dts"
+#include "qcom-msm8916-smp.dtsi"
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-grandmax.dts b/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-grandmax.dts
new file mode 100644
index 000000000000..d3abe0536238
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-grandmax.dts
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "arm64/qcom/msm8916-samsung-grandmax.dts"
+#include "qcom-msm8916-smp.dtsi"
diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts b/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-serranove.dts
index dee2c20af355..dee2c20af355 100644
--- a/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8916-samsung-serranove.dts
diff --git a/arch/arm/boot/dts/qcom-msm8916-smp.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi
index 36328dbe4212..94b7694eeeff 100644
--- a/arch/arm/boot/dts/qcom-msm8916-smp.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi
@@ -25,8 +25,8 @@
 	};
 };
 
-&CPU_SLEEP_0 {
-	compatible = "qcom,idle-state-spc";
+&cpu_sleep_0 {
+	compatible = "qcom,idle-state-spc", "arm,idle-state";
 };
 
 &cpu0_acc {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
new file mode 100644
index 000000000000..cb571aa13c11
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
@@ -0,0 +1,397 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "msm8926.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &mba_region;
+/delete-node/ &mpss_region;
+/delete-node/ &smem_region;
+
+/ {
+	model = "HTC One Mini 2";
+	compatible = "htc,memul", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		unknown@5b00000 {
+			reg = <0x05b00000 0x200000>;
+			no-map;
+		};
+
+		unknown@7500000 {
+			reg = <0x07500000 0xb00000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8000000 {
+			reg = <0x08000000 0x4f00000>;
+			no-map;
+		};
+
+		unknown@cf00000 {
+			reg = <0x0cf00000 0x200000>;
+			no-map;
+		};
+
+		mba_region: mba@d100000 {
+			reg = <0x0d100000 0x3a000>;
+			no-map;
+		};
+
+		unknown@d13a000 {
+			reg = <0x0d13a000 0xc6000>;
+			no-map;
+		};
+
+		wcnss_region: wcnss@d200000 {
+			reg = <0x0d200000 0x650000>;
+			no-map;
+		};
+
+		unknown@d850000 {
+			reg = <0x0d850000 0x3b0000>;
+			no-map;
+		};
+
+		adsp_region: adsp@dc00000 {
+			reg = <0x0dc00000 0x1400000>;
+			no-map;
+		};
+
+		unknown@f000000 {
+			reg = <0x0f000000 0x500000>;
+			no-map;
+		};
+
+		venus_region: venus@f500000 {
+			reg = <0x0f500000 0x500000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		unknown@fb00000 {
+			reg = <0x0fb00000 0x280000>;
+			no-map;
+		};
+
+		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0fd80000 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		unknown@ff00000 {
+			reg = <0x0ff00000 0x1700000>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	firmware-name = "qcom/msm8926/memul/adsp.mbn";
+	status = "okay";
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	magnetometer@d {
+		compatible = "asahi-kasei,ak8963";
+		reg = <0x0d>;
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_RISING>;
+		vdd-supply = <&pm8226_l19>;
+		vid-supply = <&pm8226_l28>;
+	};
+
+	accelerometer@18 {
+		compatible = "bosch,bma250e";
+		reg = <0x18>;
+		interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>;
+		vdd-supply = <&pm8226_l19>;
+		vddio-supply = <&pm8226_l28>;
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	/* TFA9887 @ 34 */
+	/* TFA9887 @ 35 */
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l19>;
+
+		syna,startup-delay-ms = <160>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	/* NCP6924 Camera Regulators @ 10 */
+	/* PN544 NFC @ 28 */
+	/* TPS61310 Flash/Torch @ 33 */
+};
+
+&modem {
+	mx-supply = <&pm8226_l3>;
+	pll-supply = <&pm8226_l8>;
+	mss-supply = <&pm8226_s5>;
+
+	firmware-name = "qcom/msm8926/memul/mba.b00", "qcom/msm8926/memul/modem.mdt";
+
+	status = "okay";
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1750000>;
+	qcom,fast-charge-current-limit = <1750000>;
+	qcom,fast-charge-safe-voltage = <4360000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4300000>;
+	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts
new file mode 100644
index 000000000000..eea4fd8cd972
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "msm8926.dtsi"
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/* This device has touchscreen on i2c3 instead */
+/delete-node/ &touchscreen;
+
+/ {
+	model = "Nokia Lumia 735";
+	compatible = "microsoft,superman-lte", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	touchscreen: touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l6>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c5 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts
new file mode 100644
index 000000000000..f23bbb94cc5e
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "msm8926.dtsi"
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/* This device has touchscreen on i2c1 instead */
+/delete-node/ &touchscreen;
+
+/* The magnetometer used on this device is currently unknown */
+/delete-node/ &magnetometer;
+
+/ {
+	model = "Nokia Lumia 830";
+	compatible = "microsoft,tesla", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+
+	touchscreen: touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l6>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c5 {
+	status = "disabled";
+};
+
+&gpio_keys {
+	key-camera-snapshot {
+		label = "Camera Snapshot";
+		gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_CAMERA>;
+	};
+
+	key-camera-focus {
+		label = "Camera Focus";
+		gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_CAMERA_FOCUS>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
new file mode 100644
index 000000000000..db3273c755c2
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
@@ -0,0 +1,412 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "msm8926.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+	model = "Motorola Moto G 4G (2013)";
+	compatible = "motorola,peregrine", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer0: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+			vsp-supply = <&reg_lcd_pos>;
+			vsn-supply = <&reg_lcd_neg>;
+			vdd-supply = <&pm8226_l28>;
+			vddio-supply = <&vddio_disp_vreg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	vddio_disp_vreg: regulator-vddio-disp {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio_disp";
+		gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <300>;
+		enable-active-high;
+		regulator-boot-on;
+		vin-supply = <&pm8226_l8>;
+		pinctrl-0 = <&disp_vddio_default>;
+		pinctrl-names = "default";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	magnetometer@c {
+		compatible = "asahi-kasei,ak8963";
+		reg = <0xc>;
+		interrupts-extended = <&tlmm 38 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&pm8226_l19>;
+		pinctrl-0 = <&mag_int_default &mag_reset_default>;
+		pinctrl-names = "default";
+	};
+
+	accelerometer@18 {
+		compatible = "st,lis3dh-accel";
+		reg = <0x18>;
+		interrupts-extended = <&tlmm 1 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l19>;
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+		st,drdy-int-pin = <1>;
+	};
+};
+
+&blsp1_i2c3 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	regulator@3e {
+		compatible = "ti,tps65132";
+		reg = <0x3e>;
+		pinctrl-0 = <&reg_lcd_default>;
+		pinctrl-names = "default";
+
+		reg_lcd_pos: outp {
+			regulator-name = "outp";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+			regulator-active-discharge = <1>;
+			regulator-boot-on;
+			enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_lcd_neg: outn {
+			regulator-name = "outn";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+			regulator-active-discharge = <1>;
+			regulator-boot-on;
+			enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sensor@48 {
+		compatible = "ti,tmp108";
+		reg = <0x48>;
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&temp_alert_default>;
+		pinctrl-names = "default";
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&pm8226_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-boot-on;
+		};
+
+		pm8226_lvs1: lvs1 {
+			/* Pull-up for I2C lines */
+			regulator-always-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 115 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <2000000>;
+	qcom,fast-charge-current-limit = <1900000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio1";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-disable;
+	};
+
+	disp_vddio_default: disp-vddio-default-state {
+		pins = "gpio34";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	mag_int_default: mag-int-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-disable;
+	};
+
+	mag_reset_default: mag-reset-default-state {
+		pins = "gpio62";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	reg_lcd_default: reg-lcd-default-state {
+		pins = "gpio31", "gpio33";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	temp_alert_default: temp-alert-default-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-disable;
+	};
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts
new file mode 100644
index 000000000000..73e19176eb97
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
+ * Copyright (c) 2023, Stefan Hansson <newbyte@postmarketos.org>
+ */
+
+/dts-v1/;
+
+#include "msm8926.dtsi"
+#include "qcom-msm8226-samsung-matisse-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab 4 10.1 LTE";
+	compatible = "samsung,matisselte", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "tablet";
+
+	reg_tsp_3p3v: regulator-tsp-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en1_default_state>;
+	};
+};
+
+&modem {
+	mss-supply = <&pm8226_s5>;
+};
+
+&tlmm {
+	tsp_en1_default_state: tsp-en1-default-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
new file mode 100644
index 000000000000..36f4c997b0b3
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/input.h>
+
+#include "qcom-msm8960.dtsi"
+#include "pm8921.dtsi"
+
+/ {
+	model = "Qualcomm MSM8960 CDP";
+	compatible = "qcom,msm8960-cdp", "qcom,msm8960";
+
+	aliases {
+		serial0 = &gsbi5_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_l2: gpio-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ext_l2";
+		gpio = <&msmgpio 91 0>;
+		startup-delay-us = <10000>;
+		enable-active-high;
+	};
+};
+
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_SPI>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_default>;
+	status = "okay";
+};
+
+&gsbi1_spi {
+	status = "okay";
+
+	ethernet@0 {
+		compatible = "micrel,ks8851";
+		reg = <0>;
+		interrupt-parent = <&msmgpio>;
+		interrupts = <90 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <5400000>;
+		vdd-supply = <&ext_l2>;
+		vdd-io-supply = <&pm8921_lvs6>;
+		reset-gpios = <&msmgpio 89 0>;
+	};
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi5_serial {
+	status = "okay";
+};
+
+&msmgpio {
+	spi1_default: spi1-default-state {
+		 mosi-pins {
+			pins = "gpio6";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+		 };
+
+		 miso-pins {
+			pins = "gpio7";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+		 };
+
+		 cs-pins {
+			pins = "gpio8";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+			output-low;
+		 };
+
+		 clk-pins {
+			pins = "gpio9";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+		 };
+	};
+};
+
+&pm8921 {
+	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+		MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+		MATRIX_KEY(0, 3, KEY_CAMERA)
+		>;
+	keypad,num-rows = <1>;
+	keypad,num-columns = <5>;
+
+	status = "okay";
+};
+
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s4>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+		vdd_ncp-supply = <&pm8921_l6>;
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l21_l23_l29-supply = <&pm8921_s8>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
+		/* Buck SMPS */
+		pm8921_s1: s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s2: s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8921_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+			bias-pull-down;
+		};
+
+		pm8921_s4: s4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+		};
+
+		pm8921_s7: s7 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s8: s8 {
+			regulator-always-on;
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* PMOS LDO */
+		pm8921_l1: l1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8921_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l3: l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			bias-pull-down;
+		};
+
+		pm8921_l4: l4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l5: l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l6: l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l7: l7 {
+			regulator-always-on;
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l8: l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l10: l10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l11: l11 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8921_l12: l12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l16: l16 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l17: l17 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l18: l18 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			bias-pull-down;
+		};
+
+		pm8921_l21: l21 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		pm8921_l22: l22 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+			bias-pull-down;
+		};
+
+		pm8921_l23: l23 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l24: l24 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8921_l25: l25 {
+			regulator-always-on;
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs2: lvs2 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs3: lvs3 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs4: lvs4 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs5: lvs5 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs6: lvs6 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs7: lvs7 {
+			bias-pull-down;
+		};
+
+		pm8921_ncp: ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
+
+/* eMMC */
+&sdcc1 {
+	status = "okay";
+};
+
+/* External micro SD card */
+&sdcc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi
new file mode 100644
index 000000000000..f18753e9f5ef
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+&msmgpio {
+	i2c3_default_state: i2c3-default-state {
+		i2c3-pins {
+			pins = "gpio16", "gpio17";
+			function = "gsbi3";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	i2c3_sleep_state: i2c3-sleep-state {
+		i2c3-pins {
+			pins = "gpio16", "gpio17";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+	};
+
+	sdcc3_default_state: sdcc3-default-state {
+		clk-pins {
+			pins = "sdc3_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc3_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc3_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	sdcc3_sleep_state: sdcc3-sleep-state {
+		clk-pins {
+			pins = "sdc3_clk";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc3_cmd";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc3_data";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
new file mode 100644
index 000000000000..49d117ea033a
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -0,0 +1,410 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+
+#include "qcom-msm8960.dtsi"
+#include "pm8921.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	model = "Samsung Galaxy Express SGH-I437";
+	compatible = "samsung,expressatt", "qcom,msm8960";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &gsbi5_serial;
+		mmc0 = &sdcc1; /* SDCC1 eMMC slot */
+		mmc1 = &sdcc3; /* SDCC3 SD card slot */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-home {
+			label = "Home";
+			gpios = <&msmgpio 40 GPIO_ACTIVE_LOW>;
+			debounce-interval = <5>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&msmgpio 50 GPIO_ACTIVE_LOW>;
+			debounce-interval = <5>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&msmgpio 81 GPIO_ACTIVE_LOW>;
+			debounce-interval = <5>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi5_serial {
+	status = "okay";
+};
+
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	status = "okay";
+};
+
+&sdcc3 {
+	vmmc-supply = <&pm8921_l6>;
+	vqmmc-supply = <&pm8921_l7>;
+
+	pinctrl-0 = <&sdcc3_default_state>;
+	pinctrl-1 = <&sdcc3_sleep_state>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_SPI>;
+	pinctrl-0 = <&spi1_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gsbi1_spi {
+	status = "okay";
+};
+
+&gsbi3 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi3_i2c {
+	status = "okay";
+
+	// Atmel mXT224S touchscreen
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&msmgpio>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		vdda-supply = <&pm8921_lvs6>;
+		vdd-supply = <&pm8921_l17>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen>;
+	};
+};
+
+&msmgpio {
+	spi1_default: spi1-default-state {
+		mosi-pins {
+			pins = "gpio6";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+		};
+
+		miso-pins {
+			pins = "gpio7";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+		};
+
+		cs-pins {
+			pins = "gpio8";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+			output-low;
+		};
+
+		clk-pins {
+			pins = "gpio9";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+		};
+	};
+
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio40", "gpio50", "gpio81";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	touchscreen: touchscreen-int-state {
+		pins = "gpio11";
+		function = "gpio";
+		output-enable;
+		bias-disable;
+		drive-strength = <2>;
+	};
+};
+
+&pm8921 {
+	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s4>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+		vdd_ncp-supply = <&pm8921_l6>;
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l21_l23_l29-supply = <&pm8921_s8>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
+		/* Buck SMPS */
+		pm8921_s1: s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s2: s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8921_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+			bias-pull-down;
+		};
+
+		pm8921_s4: s4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+		};
+
+		pm8921_s7: s7 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s8: s8 {
+			regulator-always-on;
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* PMOS LDO */
+		pm8921_l1: l1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8921_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l3: l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		pm8921_l4: l4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l5: l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l6: l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l7: l7 {
+			regulator-always-on;
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l8: l8 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3100000>;
+			bias-pull-down;
+		};
+
+		pm8921_l9: l9 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8921_l10: l10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l11: l11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		pm8921_l12: l12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l16: l16 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l17: l17 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		pm8921_l18: l18 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			bias-pull-down;
+		};
+
+		pm8921_l21: l21 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		pm8921_l22: l22 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+			bias-pull-down;
+		};
+
+		pm8921_l23: l23 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l24: l24 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8921_l25: l25 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs2: lvs2 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs3: lvs3 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs4: lvs4 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs5: lvs5 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs6: lvs6 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs7: lvs7 {
+			bias-pull-down;
+		};
+
+		pm8921_ncp: ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts
new file mode 100644
index 000000000000..f2f59fc8b9b6
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2025, Antony Kurniawan Soemardi <linux@smankusors.com>
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+
+#include "qcom-msm8960.dtsi"
+#include "pm8921.dtsi"
+
+/ {
+	model = "Sony Xperia SP";
+	compatible = "sony,huashan", "qcom,msm8960t", "qcom,msm8960";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &gsbi8_serial;
+		mmc0 = &sdcc1; /* SDCC1 eMMC slot */
+		mmc1 = &sdcc3; /* SDCC3 SD card slot */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm8921_gpio 21 GPIO_ACTIVE_LOW>;
+			debounce-interval = <10>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&pm8921_gpio 20 GPIO_ACTIVE_LOW>;
+			debounce-interval = <10>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&gsbi8 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi8_serial {
+	status = "okay";
+};
+
+&pm8921 {
+	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_gpio {
+	keypad_default_state: keypad-default-state {
+		keypad-sense-pins {
+			pins = "gpio1", "gpio2", "gpio3", "gpio4", "gpio5";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			bias-pull-up;
+			input-enable;
+			power-source = <PM8921_GPIO_S4>;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_31P5>;
+		};
+
+		keypad-drive-pins {
+			pins = "gpio9", "gpio10";
+			function = PMIC_GPIO_FUNC_FUNC1;
+			bias-disable;
+			drive-open-drain;
+			output-low;
+			power-source = <PM8921_GPIO_S4>;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		};
+	};
+};
+
+&pm8921_keypad {
+	linux,keymap = <
+		MATRIX_KEY(1, 0, KEY_CAMERA_FOCUS)
+		MATRIX_KEY(1, 1, KEY_CAMERA)
+	>;
+	keypad,num-rows = <2>;
+	keypad,num-columns = <5>;
+
+	pinctrl-0 = <&keypad_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s4>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+		vdd_ncp-supply = <&pm8921_l6>;
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l21_l23_l29-supply = <&pm8921_s8>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+		vdd_l29-supply = <&pm8921_s8>;
+
+		/* Buck SMPS */
+		pm8921_s1: s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s2: s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8921_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+			bias-pull-down;
+		};
+
+		pm8921_s4: s4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+		};
+
+		pm8921_s7: s7 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s8: s8 {
+			regulator-always-on;
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* PMOS LDO */
+		pm8921_l1: l1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8921_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l3: l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			bias-pull-down;
+		};
+
+		pm8921_l4: l4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l5: l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l6: l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l7: l7 {
+			regulator-always-on;
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l8: l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l9: l9 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8921_l10: l10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l11: l11 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l12: l12 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l16: l16 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l17: l17 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l18: l18 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l21: l21 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		pm8921_l22: l22 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+			bias-pull-down;
+		};
+
+		pm8921_l23: l23 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l24: l24 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8921_l25: l25 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs2: lvs2 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs3: lvs3 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs4: lvs4 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs5: lvs5 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs6: lvs6 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs7: lvs7 {
+			bias-pull-down;
+		};
+
+		pm8921_ncp: ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
+
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	status = "okay";
+};
+
+&sdcc3 {
+	vmmc-supply = <&pm8921_l6>;
+	vqmmc-supply = <&pm8921_l7>;
+
+	pinctrl-0 = <&sdcc3_default_state>;
+	pinctrl-1 = <&sdcc3_sleep_state>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
new file mode 100644
index 000000000000..6e272d5345a8
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -0,0 +1,525 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+#include <dt-bindings/clock/qcom,lcc-msm8960.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm MSM8960";
+	compatible = "qcom,msm8960";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+
+		cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&l2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&l2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+
+				cpu_crit1: trip1 {
+					temperature = <95000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		qcom,no-pc-write;
+	};
+
+	clocks {
+		cxo_board: cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "cxo_board";
+		};
+
+		pxo_board: pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+			clock-output-names = "pxo_board";
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	/* Temporary fixed regulator */
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer",
+				     "qcom,msm-timer";
+			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>;
+			clocks = <&sleep_clk>;
+			clock-names = "sleep";
+			cpu-offset = <0x80000>;
+		};
+
+		qfprom: efuse@700000 {
+			compatible = "qcom,msm8960-qfprom", "qcom,qfprom";
+			reg = <0x00700000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_calib: calib@404 {
+				reg = <0x404 0x10>;
+			};
+
+			tsens_backup: backup-calib@414 {
+				reg = <0x414 0x10>;
+			};
+		};
+
+		msmgpio: pinctrl@800000 {
+			compatible = "qcom,msm8960-pinctrl";
+			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 152>;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x800000 0x4000>;
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-msm8960", "syscon";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+			clocks = <&cxo_board>,
+				 <&pxo_board>,
+				 <&lcc PLL4>;
+			clock-names = "cxo", "pxo", "pll4";
+
+			tsens: thermal-sensor {
+				compatible = "qcom,msm8960-tsens";
+
+				nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+				nvmem-cell-names = "calib", "calib_backup";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "uplow";
+
+				#qcom,sensors = <5>;
+				#thermal-sensor-cells = <1>;
+			};
+		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-msm8960";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL4_VOTE>,
+				 <0>,
+				 <0>, <0>,
+				 <0>, <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll4_vote",
+				      "mi2s_codec_clk",
+				      "codec_i2s_mic_codec_clk",
+				      "spare_i2s_mic_codec_clk",
+				      "codec_i2s_spkr_codec_clk",
+				      "spare_i2s_spkr_codec_clk",
+				      "pcm_codec_clk";
+		};
+
+		clock-controller@4000000 {
+			compatible = "qcom,mmcc-msm8960";
+			reg = <0x4000000 0x1000>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL3>,
+				 <&gcc PLL8_VOTE>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll3",
+				      "pll8_vote",
+				      "dsi1pll",
+				      "dsi1pllbyte",
+				      "dsi2pll",
+				      "dsi2pllbyte",
+				      "hdmipll";
+		};
+
+		l2cc: clock-controller@2011000 {
+			compatible = "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc", "syscon";
+			reg = <0x2011000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			#clock-cells = <0>;
+		};
+
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-msm8960";
+			reg = <0x108000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ack", "err", "wakeup";
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu0_aux";
+			#clock-cells = <0>;
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu1_aux";
+			#clock-cells = <0>;
+		};
+
+		saw0: power-manager@2089000 {
+			compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+
+			saw0_vreg: regulator {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+			};
+		};
+
+		saw1: power-manager@2099000 {
+			compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+
+			saw1_vreg: regulator {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+			};
+		};
+
+		gsbi5: gsbi@16400000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x16400000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			status = "disabled";
+
+			gsbi5_serial: serial@16440000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16440000 0x1000>,
+				      <0x16400000 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi8: gsbi@1a000000  {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <8>;
+			reg = <0x1a000000 0x100>;
+			clocks = <&gcc GSBI8_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			status = "disabled";
+
+			gsbi8_serial: serial@1a040000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x1a040000 0x1000>,
+				      <0x1a000000 0x1000>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI8_UART_CLK>,
+					 <&gcc GSBI8_H_CLK>;
+				clock-names = "core",
+					      "iface";
+
+				status = "disabled";
+			};
+		};
+
+		ssbi: ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+		};
+
+		sdcc3: mmc@12180000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x12180000 0x2000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <192000000>;
+			no-1-8-v;
+			vmmc-supply = <&vsdcc_fixed>;
+			dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+			dma-names = "tx", "rx";
+		};
+
+		sdcc3bam: dma-controller@12182000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x4000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc1: mmc@12400000 {
+			status = "disabled";
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			reg = <0x12400000 0x2000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <8>;
+			max-frequency = <96000000>;
+			non-removable;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			vmmc-supply = <&vsdcc_fixed>;
+			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+			dma-names = "tx", "rx";
+		};
+
+		sdcc1bam: dma-controller@12402000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x4000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-msm8960", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
+		gsbi1: gsbi@16000000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <1>;
+			reg = <0x16000000 0x100>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			gsbi1_spi: spi@16080000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16080000 0x1000>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&msmgpio 8 0>;
+
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		usb1: usb@12500000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x12500000 0x200>,
+			      <0x12500200 0x200>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
+			assigned-clock-rates = <60000000>;
+			resets = <&gcc USB_HS1_RESET>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			ahb-burst-config = <0>;
+			phys = <&usb_hs1_phy>;
+			phy-names = "usb-phy";
+			#reset-cells = <1>;
+			status = "disabled";
+
+			ulpi {
+				usb_hs1_phy: phy {
+					compatible = "qcom,usb-hs-phy-msm8960",
+						     "qcom,usb-hs-phy";
+					clocks = <&sleep_clk>, <&cxo_board>;
+					clock-names = "sleep", "ref";
+					resets = <&usb1 0>;
+					reset-names = "por";
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		gsbi3: gsbi@16200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x16200000 0x100>;
+			ranges;
+			cell-index = <3>;
+			clocks = <&gcc GSBI3_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			gsbi3_i2c: i2c@16280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16280000 0x1000>;
+				pinctrl-0 = <&i2c3_default_state>;
+				pinctrl-1 = <&i2c3_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI3_QUP_CLK>,
+					 <&gcc GSBI3_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+};
+#include "qcom-msm8960-pins.dtsi"
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index ec5d340562b6..b3127f0383cf 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -9,8 +9,10 @@
 / {
 	model = "LGE MSM 8974 HAMMERHEAD";
 	compatible = "lge,hammerhead", "qcom,msm8974";
+	chassis-type = "handset";
 
 	aliases {
+		mmc0 = &sdhc_1;
 		serial0 = &blsp1_uart1;
 		serial1 = &blsp2_uart4;
 	};
@@ -40,6 +42,52 @@
 		};
 	};
 
+	clk_pwm: pwm {
+		compatible = "clk-pwm";
+		clocks = <&mmcc CAMSS_GP1_CLK>;
+
+		pinctrl-0 = <&vibrator_pin>;
+		pinctrl-names = "default";
+
+		#pwm-cells = <2>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&clk_pwm 0 100000>;
+		pwm-names = "enable";
+
+		vcc-supply = <&pm8941_l19>;
+		enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+
 	vreg_wlan: wlan-regulator {
 		compatible = "regulator-fixed";
 
@@ -120,7 +168,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 
-	avago_apds993@39 {
+	sensor@39 {
 		compatible = "avago,apds9930";
 		reg = <0x39>;
 		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
@@ -135,7 +183,7 @@
 	status = "okay";
 	clock-frequency = <355000>;
 
-	led-controller@38 {
+	backlight: led-controller@38 {
 		compatible = "ti,lm3630a";
 		status = "okay";
 		reg = <0x38>;
@@ -175,7 +223,7 @@
 			ak8963@f {
 				compatible = "asahi-kasei,ak8963";
 				reg = <0x0f>;
-				gpios = <&tlmm 67 0>;
+				gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>;
 				vid-supply = <&pm8941_lvs1>;
 				vdd-supply = <&pm8941_l17>;
 			};
@@ -210,7 +258,11 @@
 	};
 };
 
-&dsi0 {
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
 	status = "okay";
 
 	vdda-supply = <&pm8941_l2>;
@@ -221,57 +273,30 @@
 		reg = <0>;
 		compatible = "lg,acx467akm-7";
 
+		backlight = <&backlight>;
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&panel_pin>;
 
 		port {
 			panel_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
+				remote-endpoint = <&mdss_dsi0_out>;
 			};
 		};
 	};
 };
 
-&dsi0_out {
+&mdss_dsi0_out {
 	remote-endpoint = <&panel_in>;
 	data-lanes = <0 1 2 3>;
 };
 
-&dsi0_phy {
+&mdss_dsi0_phy {
 	status = "okay";
 
 	vddio-supply = <&pm8941_l12>;
 };
 
-&mdss {
-	status = "okay";
-};
-
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-
-	extcon = <&charger>, <&usb_id>;
-	vbus-supply = <&usb_otg_vbus>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@a {
-			status = "okay";
-
-			v1p8-supply = <&pm8941_l6>;
-			v3p3-supply = <&pm8941_l24>;
-
-			qcom,init-seq = /bits/ 8 <0x1 0x64>;
-		};
-	};
-};
-
 &pm8941_gpios {
 	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio2", "gpio3";
@@ -306,7 +331,7 @@
 		power-source = <PM8941_GPIO_S3>;
 	};
 
-	otg {
+	otg-hog {
 		gpio-hog;
 		gpios = <35 GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -343,8 +368,21 @@
 	};
 };
 
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+	status = "okay";
+};
+
+&remoteproc_mss {
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+	status = "okay";
+};
+
 &rpm_requests {
-	pm8841-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8841-regulators";
 
 		pm8841_s1: s1 {
@@ -368,7 +406,7 @@
 		};
 	};
 
-	pm8941-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pm8941-regulators";
 
 		vdd_l1_l3-supply = <&pm8941_s1>;
@@ -561,7 +599,7 @@
 	pinctrl-0 = <&sdc2_on>;
 	pinctrl-1 = <&sdc2_off>;
 
-	bcrmf@1 {
+	wifi@1 {
 		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
 		reg = <1>;
 
@@ -573,52 +611,50 @@
 };
 
 &tlmm {
-	sdc1_on: sdc1-on {
-		clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			drive-strength = <16>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc1_cmd", "sdc1_data";
 			drive-strength = <10>;
 			bias-pull-up;
 		};
 	};
 
-	sdc2_on: sdc2-on {
-		clk {
+	sdc2_on: sdc2-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <6>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc2_cmd", "sdc2_data";
 			drive-strength = <6>;
 			bias-pull-up;
 		};
 	};
 
-	mpu6515_pin: mpu6515 {
+	mpu6515_pin: mpu6515-state {
 		pins = "gpio73";
 		function = "gpio";
 		bias-disable;
-		input-enable;
 	};
 
-	touch_pin: touch {
-		int {
+	touch_pin: touch-state {
+		int-pins {
 			pins = "gpio5";
 			function = "gpio";
 
 			drive-strength = <2>;
 			bias-disable;
-			input-enable;
 		};
 
-		reset {
+		reset-pins {
 			pins = "gpio8";
 			function = "gpio";
 
@@ -627,27 +663,66 @@
 		};
 	};
 
-	panel_pin: panel {
+	panel_pin: panel-state {
 		pins = "gpio12";
 		function = "mdp_vsync";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	bt_pin: bt {
-		hostwake {
+	bt_pin: bt-state {
+		hostwake-pins {
 			pins = "gpio42";
 			function = "gpio";
 		};
 
-		devwake {
+		devwake-pins {
 			pins = "gpio62";
 			function = "gpio";
 		};
 
-		shutdown {
+		shutdown-pins {
 			pins = "gpio41";
 			function = "gpio";
 		};
 	};
+
+	vibrator_pin: vibrator-state {
+		core-pins {
+			pins = "gpio27";
+			function = "gp1_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
+
+		enable-pins {
+			pins = "gpio60";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+};
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+
+	extcon = <&charger>, <&usb_id>;
+	vbus-supply = <&usb_otg_vbus>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
 };
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
new file mode 100644
index 000000000000..b7a1367d3470
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
@@ -0,0 +1,446 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Samsung Galaxy Note 3";
+	compatible = "samsung,hlte", "qcom,msm8974";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_3; /* SDC3 SD card slot */
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_pin_a>;
+		pinctrl-names = "default";
+
+		key-home {
+			label = "Home Key";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	i2c-touchkey {
+		compatible = "i2c-gpio";
+
+		sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&i2c_touchkey_pins>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkey@20 {
+			compatible = "cypress,midas-touchkey";
+			reg = <0x20>;
+
+			interrupts-extended = <&pm8941_gpios 29 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-0 = <&touchkey_pin>;
+			pinctrl-names = "default";
+
+			vcc-supply = <&pm8941_lvs3>;
+			vdd-supply = <&pm8941_l13>;
+
+			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+		};
+	};
+
+	touch_ldo: regulator-touch {
+		compatible = "regulator-fixed";
+		regulator-name = "touch-ldo";
+
+		gpio = <&pm8941_gpios 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+
+		pinctrl-0 = <&touch_ldo_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupt-parent = <&pm8941_gpios>;
+		interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pm8941_l10>;
+		vio-supply = <&touch_ldo>;
+
+		pinctrl-0 = <&touch_pin>;
+		pinctrl-names = "default";
+
+		syna,startup-delay-ms = <100>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp2_i2c6 {
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max17048";
+		reg = <0x36>;
+
+		maxim,double-soc;
+		maxim,rcomp = /bits/ 8 <0x56>;
+
+		interrupt-parent = <&pm8941_gpios>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&fuelgauge_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&pm8941_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio3", "gpio5";
+		function = "normal";
+		bias-pull-up;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	fuelgauge_pin: fuelgauge-int-state {
+		pins = "gpio26";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	touch_pin: touchscreen-int-state {
+		pins = "gpio30";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	touch_ldo_pin: touchscreen-ldo-state {
+		pins = "gpio9";
+		function = "normal";
+		output-high;
+		power-source = <PM8941_GPIO_S3>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+
+	touchkey_pin: touchkey-int-state {
+		pins = "gpio29";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+};
+
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+	status = "okay";
+};
+
+&remoteproc_mss {
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <815000>;
+			regulator-max-microvolt = <900000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8941_lvs1: lvs1 {};
+		pm8941_lvs3: lvs3 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-0 = <&sdhc1_pin_a>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhc_3 {
+	max-frequency = <100000000>;
+
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l21>;
+
+	pinctrl-0 = <&sdhc3_pin_a>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&tlmm {
+	sdhc1_pin_a: sdhc1-pin-active-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <4>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+	};
+
+	sdhc3_pin_a: sdhc3-pin-active-state {
+		pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+		function = "sdc3";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	i2c_touchkey_pins: i2c-touchkey-state {
+		pins = "gpio95", "gpio96";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&usb {
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+
+	status = "okay";
+};
+
+&usb_hs1_phy {
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-amami.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-amami.dts
new file mode 100644
index 000000000000..472a45408add
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-amami.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974-sony-xperia-rhine.dtsi"
+
+/ {
+	model = "Sony Xperia Z1 Compact";
+	compatible = "sony,xperia-amami", "qcom,msm8974";
+	chassis-type = "handset";
+
+	gpio-keys {
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+	};
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1300000>;
+	qcom,fast-charge-current-limit = <1300000>;
+	qcom,dc-current-limit = <1300000>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-honami.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-honami.dts
new file mode 100644
index 000000000000..c3d69641fc1d
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-honami.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974-sony-xperia-rhine.dtsi"
+
+/ {
+	model = "Sony Xperia Z1";
+	compatible = "sony,xperia-honami", "qcom,msm8974";
+	chassis-type = "handset";
+
+	gpio-keys {
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-togari.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-togari.dts
new file mode 100644
index 000000000000..f60f7304d35e
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-togari.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974-sony-xperia-rhine.dtsi"
+
+/* Togari uses a different touchscreen compared to other rhine devices */
+/delete-node/ &touchscreen;
+
+/ {
+	model = "Sony Xperia Z Ultra";
+	compatible = "sony,xperia-togari", "qcom,msm8974";
+	chassis-type = "handset";
+};
+
+&pm8941_l23 {
+	regulator-min-microvolt = <2600000>;
+	regulator-max-microvolt = <2600000>;
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
index 5a70683d9103..d7322fc6a095 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -1,13 +1,15 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
 		serial0 = &blsp1_uart2;
 	};
 
@@ -28,20 +30,6 @@
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
-		key-camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA>;
-		};
-
-		key-camera-focus {
-			label = "camera_focus";
-			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA_FOCUS>;
-		};
-
 		key-volume-up {
 			label = "volume_up";
 			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
@@ -65,13 +53,40 @@
 			pmsg-size = <0x80000>;
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c2 {
 	status = "okay";
 	clock-frequency = <355000>;
 
-	synaptics@2c {
+	touchscreen: synaptics@2c {
 		compatible = "syna,rmi4-i2c";
 		reg = <0x2c>;
 
@@ -132,31 +147,6 @@
 	/* sii8334 MHL HDMI bridge */
 };
 
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@a {
-			status = "okay";
-
-			v1p8-supply = <&pm8941_l6>;
-			v3p3-supply = <&pm8941_l24>;
-
-			extcon = <&smbb>;
-			qcom,init-seq = /bits/ 8 <0x1 0x64>;
-		};
-	};
-};
-
 &pm8941_coincell {
 	status = "okay";
 	qcom,rset-ohms = <2100>;
@@ -178,7 +168,7 @@
 
 	qcom,power-source = <1>;
 
-	rgb-led {
+	multi-led {
 		color = <LED_COLOR_ID_RGB>;
 		function = LED_FUNCTION_STATUS;
 
@@ -213,8 +203,21 @@
 	qcom,num-strings = <2>;
 };
 
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+	status = "okay";
+};
+
+&remoteproc_mss {
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+	status = "okay";
+};
+
 &rpm_requests {
-	pm8841-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8841-regulators";
 
 		pm8841_s1: s1 {
@@ -238,7 +241,7 @@
 		};
 	};
 
-	pm8941-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pm8941-regulators";
 
 		vdd_l1_l3-supply = <&pm8941_s1>;
@@ -431,6 +434,8 @@
 };
 
 &smbb {
+	usb-charge-current-limit = <1800000>;
+
 	qcom,fast-charge-safe-current = <1500000>;
 	qcom,fast-charge-current-limit = <1500000>;
 	qcom,dc-current-limit = <1800000>;
@@ -439,45 +444,46 @@
 	qcom,fast-charge-low-threshold-voltage = <3400000>;
 	qcom,auto-recharge-threshold-voltage = <4200000>;
 	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
 };
 
 &tlmm {
-	ts_int_pin: touch-int {
+	ts_int_pin: touch-int-state {
 		pins = "gpio61";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
-	sdc1_on: sdc1-on {
-		clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			drive-strength = <16>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc1_cmd", "sdc1_data";
 			drive-strength = <10>;
 			bias-pull-up;
 		};
 	};
 
-	sdc2_on: sdc-on {
-		clk {
+	sdc2_on: sdc-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <10>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc2_cmd", "sdc2_data";
 			drive-strength = <6>;
 			bias-pull-up;
 		};
 
-		cd {
+		cd-pins {
 			pins = "gpio62";
 			function = "gpio";
 			drive-strength = <2>;
@@ -485,3 +491,26 @@
 		};
 	};
 };
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
new file mode 100644
index 000000000000..7e119370f337
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -0,0 +1,2418 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/interconnect/qcom,msm8974.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
+#include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/reset/qcom,gcc-msm8974.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+
+		cpu0: cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&l2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+			cpu-idle-states = <&cpu_spc>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&l2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+			cpu-idle-states = <&cpu_spc>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&l2>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+			cpu-idle-states = <&cpu_spc>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&l2>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+			cpu-idle-states = <&cpu_spc>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			qcom,saw = <&saw_l2>;
+		};
+
+		idle-states {
+			cpu_spc: cpu-spc {
+				compatible = "qcom,idle-state-spc",
+						"arm,idle-state";
+				entry-latency-us = <150>;
+				exit-latency-us = <200>;
+				min-residency-us = <2000>;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8974", "qcom,scm";
+			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8974-rpm-proc", "qcom,rpm-proc";
+
+		master-stats {
+			compatible = "qcom,rpm-master-stats";
+			qcom,rpm-msg-ram = <&apss_master_stats>,
+					   <&mpss_master_stats>,
+					   <&lpss_master_stats>,
+					   <&pronto_master_stats>;
+			qcom,master-names = "APSS",
+					    "MPSS",
+					    "LPSS",
+					    "PRONTO";
+		};
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apcs 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8974", "qcom,smd-rpm";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+			};
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mpss_region: mpss@8000000 {
+			reg = <0x08000000 0x5100000>;
+			no-map;
+		};
+
+		mba_region: mba@d100000 {
+			reg = <0x0d100000 0x100000>;
+			no-map;
+		};
+
+		wcnss_region: wcnss@d200000 {
+			reg = <0x0d200000 0xa00000>;
+			no-map;
+		};
+
+		adsp_region: adsp@dc00000 {
+			reg = <0x0dc00000 0x1900000>;
+			no-map;
+		};
+
+		venus_region: memory@f500000 {
+			reg = <0x0f500000 0x500000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0xfa00000 0x200000>;
+			no-map;
+		};
+
+		tz_region: memory@fc00000 {
+			reg = <0x0fc00000 0x160000>;
+			no-map;
+		};
+
+		rfsa_mem: memory@fd60000 {
+			reg = <0x0fd60000 0x20000>;
+			no-map;
+		};
+
+		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0fd80000 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+
+		memory-region = <&smem_region>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mboxes = <0>, <&apcs 13>, <&apcs 9>, <&apcs 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smsm: modem@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		adsp_smsm: adsp@2 {
+			reg = <2>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@7 {
+			reg = <7>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xf9000000 0x1000>,
+			      <0xf9002000 0x1000>;
+		};
+
+		apcs: mailbox@f9011000 {
+			compatible = "qcom,msm8974-apcs-kpss-global",
+				     "qcom,msm8994-apcs-kpss-global", "syscon";
+			reg = <0xf9011000 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		saw_l2: power-manager@f9012000 {
+			compatible = "qcom,msm8974-saw2-v2.1-l2", "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+		};
+
+		watchdog@f9017000 {
+			compatible = "qcom,apss-wdt-msm8974", "qcom,kpss-wdt";
+			reg = <0xf9017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@f9020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		acc0: power-manager@f9088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw0: power-manager@f9089000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		acc1: power-manager@f9098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw1: power-manager@f9099000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		acc2: power-manager@f90a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw2: power-manager@f90a9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		acc3: power-manager@f90b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw3: power-manager@f90b9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		sdhc_1: mmc@f9824900 {
+			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			bus-width = <8>;
+			non-removable;
+
+			status = "disabled";
+		};
+
+		sdhc_3: mmc@f9864900 {
+			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
+				 <&gcc GCC_SDCC3_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			bus-width = <4>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@f98a4900 {
+			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			bus-width = <4>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		blsp1_uart1: serial@f991d000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991d000 0x1000>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@f991e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991e000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			status = "disabled";
+		};
+
+		blsp1_i2c1: i2c@f9923000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9923000 0x1000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c1_default>;
+			pinctrl-1 = <&blsp1_i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c2: i2c@f9924000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9924000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c3: i2c@f9925000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9925000 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c3_default>;
+			pinctrl-1 = <&blsp1_i2c3_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c6: i2c@f9928000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9928000 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c6_default>;
+			pinctrl-1 = <&blsp1_i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_dma: dma-controller@f9944000 {
+			compatible = "qcom,bam-v1.4.0";
+			reg = <0xf9944000 0x19000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp2_uart1: serial@f995d000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995d000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart1_default>;
+			pinctrl-1 = <&blsp2_uart1_sleep>;
+			status = "disabled";
+		};
+
+		blsp2_uart2: serial@f995e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995e000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp2_uart4: serial@f9960000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf9960000 0x1000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_uart4_default>;
+			status = "disabled";
+		};
+
+		blsp2_i2c2: i2c@f9964000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9964000 0x1000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c2_default>;
+			pinctrl-1 = <&blsp2_i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_i2c5: i2c@f9967000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9967000 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c5_default>;
+			pinctrl-1 = <&blsp2_i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_i2c6: i2c@f9968000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9968000 0x1000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c6_default>;
+			pinctrl-1 = <&blsp2_i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb: usb@f9a55000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0xf9a55000 0x200>,
+			      <0xf9a55200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <75000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs1_phy: phy-0 {
+					compatible = "qcom,usb-hs-phy-msm8974",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+					reset-names = "phy", "por";
+					status = "disabled";
+				};
+
+				usb_hs2_phy: phy-1 {
+					compatible = "qcom,usb-hs-phy-msm8974",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2B_PHY_BCR>, <&usb 1>;
+					reset-names = "phy", "por";
+					status = "disabled";
+				};
+			};
+		};
+
+		rng@f9bff000 {
+			compatible = "qcom,prng";
+			reg = <0xf9bff000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		pronto: remoteproc@fb204000 {
+			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+			reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			memory-region = <&wcnss_region>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			iris {
+				compatible = "qcom,wcn3680";
+
+				clocks = <&rpmcc RPM_SMD_CXO_A2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&apcs 17>;
+				qcom,smd-edge = <6>;
+
+				wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+					status = "disabled";
+
+					qcom,mmio = <&pronto>;
+
+					bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+							     <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		sram@fc190000 {
+			compatible = "qcom,msm8974-rpm-stats";
+			reg = <0xfc190000 0x10000>;
+		};
+
+		etf@fc307000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0xfc307000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint = <&merger_out>;
+					};
+				};
+			};
+		};
+
+		tpiu@fc318000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0xfc318000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				port {
+					tpiu_in: endpoint {
+						remote-endpoint = <&replicator_out1>;
+					};
+				 };
+			};
+		};
+
+		funnel@fc31a000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0xfc31a000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * Not described input ports:
+				 * 0 - not-connected
+				 * 1 - connected trought funnel to Multimedia CPU
+				 * 2 - connected to Wireless CPU
+				 * 3 - not-connected
+				 * 4 - not-connected
+				 * 6 - not-connected
+				 * 7 - connected to STM
+				 */
+				port@5 {
+					reg = <5>;
+					funnel1_in5: endpoint {
+						remote-endpoint = <&kpss_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&merger_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@fc31b000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0xfc31b000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * Not described input ports:
+				 * 0 - connected trought funnel to Audio, Modem and
+				 *     Resource and Power Manager CPU's
+				 * 2...7 - not-connected
+				 */
+				port@1 {
+					reg = <1>;
+					merger_in1: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					merger_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+		};
+
+		replicator@fc31c000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0xfc31c000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint = <&tpiu_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etr@fc322000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0xfc322000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		etm@fc33c000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0xfc33c000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&cpu0>;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&kpss_in0>;
+					};
+				};
+			};
+		};
+
+		etm@fc33d000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0xfc33d000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&cpu1>;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&kpss_in1>;
+					};
+				};
+			};
+		};
+
+		etm@fc33e000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0xfc33e000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&cpu2>;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&kpss_in2>;
+					};
+				};
+			};
+		};
+
+		etm@fc33f000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0xfc33f000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&cpu3>;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&kpss_in3>;
+					};
+				};
+			};
+		};
+
+		/* KPSS funnel, only 4 inputs are used */
+		funnel@fc345000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0xfc345000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					kpss_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					kpss_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					kpss_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+				port@3 {
+					reg = <3>;
+					kpss_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					kpss_out: endpoint {
+						remote-endpoint = <&funnel1_in5>;
+					};
+				};
+			};
+		};
+
+		bimc: interconnect@fc380000 {
+			reg = <0xfc380000 0x6a000>;
+			compatible = "qcom,msm8974-bimc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8974";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfc400000 0x4000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>;
+			clock-names = "xo",
+				      "sleep_clk";
+		};
+
+		rpm_msg_ram: sram@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xfc428000 0x4000>;
+
+			apss_master_stats: sram@150 {
+				reg = <0x150 0x14>;
+			};
+
+			mpss_master_stats: sram@b50 {
+				reg = <0xb50 0x14>;
+			};
+
+			lpss_master_stats: sram@1550 {
+				reg = <0x1550 0x14>;
+			};
+
+			pronto_master_stats: sram@1f50 {
+				reg = <0x1f50 0x14>;
+			};
+		};
+
+		snoc: interconnect@fc460000 {
+			reg = <0xfc460000 0x4000>;
+			compatible = "qcom,msm8974-snoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
+		pnoc: interconnect@fc468000 {
+			reg = <0xfc468000 0x4000>;
+			compatible = "qcom,msm8974-pnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+				 <&rpmcc RPM_SMD_PNOC_A_CLK>;
+		};
+
+		ocmemnoc: interconnect@fc470000 {
+			reg = <0xfc470000 0x4000>;
+			compatible = "qcom,msm8974-ocmemnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+				 <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
+		};
+
+		mmssnoc: interconnect@fc478000 {
+			reg = <0xfc478000 0x4000>;
+			compatible = "qcom,msm8974-mmssnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&mmcc MMSS_S0_AXI_CLK>,
+				 <&mmcc MMSS_S0_AXI_CLK>;
+		};
+
+		cnoc: interconnect@fc480000 {
+			reg = <0xfc480000 0x4000>;
+			compatible = "qcom,msm8974-cnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
+		};
+
+		tsens: thermal-sensor@fc4a9000 {
+			compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
+			reg = <0xfc4a9000 0x1000>, /* TM */
+			      <0xfc4a8000 0x1000>; /* SROT */
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_use_backup>,
+				      <&tsens_mode_backup>,
+				      <&tsens_base1_backup>, <&tsens_base2_backup>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>,
+				      <&tsens_s10_p1>, <&tsens_s10_p2>,
+				      <&tsens_s0_p1_backup>, <&tsens_s0_p2_backup>,
+				      <&tsens_s1_p1_backup>, <&tsens_s1_p2_backup>,
+				      <&tsens_s2_p1_backup>, <&tsens_s2_p2_backup>,
+				      <&tsens_s3_p1_backup>, <&tsens_s3_p2_backup>,
+				      <&tsens_s4_p1_backup>, <&tsens_s4_p2_backup>,
+				      <&tsens_s5_p1_backup>, <&tsens_s5_p2_backup>,
+				      <&tsens_s6_p1_backup>, <&tsens_s6_p2_backup>,
+				      <&tsens_s7_p1_backup>, <&tsens_s7_p2_backup>,
+				      <&tsens_s8_p1_backup>, <&tsens_s8_p2_backup>,
+				      <&tsens_s9_p1_backup>, <&tsens_s9_p2_backup>,
+				      <&tsens_s10_p1_backup>, <&tsens_s10_p2_backup>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "use_backup",
+					   "mode_backup",
+					   "base1_backup", "base2_backup",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2",
+					   "s10_p1", "s10_p2",
+					   "s0_p1_backup", "s0_p2_backup",
+					   "s1_p1_backup", "s1_p2_backup",
+					   "s2_p1_backup", "s2_p2_backup",
+					   "s3_p1_backup", "s3_p2_backup",
+					   "s4_p1_backup", "s4_p2_backup",
+					   "s5_p1_backup", "s5_p2_backup",
+					   "s6_p1_backup", "s6_p2_backup",
+					   "s7_p1_backup", "s7_p2_backup",
+					   "s8_p1_backup", "s8_p2_backup",
+					   "s9_p1_backup", "s9_p2_backup",
+					   "s10_p1_backup", "s10_p2_backup";
+			#qcom,sensors = <11>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		qfprom: efuse@fc4bc000 {
+			compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
+			reg = <0xfc4bc000 0x2100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@d0 {
+				reg = <0xd0 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s0_p1: s0-p1@d1 {
+				reg = <0xd1 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s1_p1: s1-p1@d2 {
+				reg = <0xd1 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s2_p1: s2-p1@d2 {
+				reg = <0xd2 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p1: s3-p1@d3 {
+				reg = <0xd3 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s4_p1: s4-p1@d4 {
+				reg = <0xd4 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p1: s5-p1@d4 {
+				reg = <0xd4 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1: s6-p1@d5 {
+				reg = <0xd5 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s7_p1: s7-p1@d6 {
+				reg = <0xd6 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s8_p1: s8-p1@d7 {
+				reg = <0xd7 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_mode: mode@d7 {
+				reg = <0xd7 0x1>;
+				bits = <6 2>;
+			};
+
+			tsens_s9_p1: s9-p1@d8 {
+				reg = <0xd8 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s10_p1: s10-p1@d8 {
+				reg = <0xd8 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_base2: base2@d9 {
+				reg = <0xd9 0x2>;
+				bits = <4 8>;
+			};
+
+			tsens_s0_p2: s0-p2@da {
+				reg = <0xda 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s1_p2: s1-p2@db {
+				reg = <0xdb 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s2_p2: s2-p2@dc {
+				reg = <0xdc 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s3_p2: s3-p2@dc {
+				reg = <0xdc 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s4_p2: s4-p2@dd {
+				reg = <0xdd 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s5_p2: s5-p2@de {
+				reg = <0xde 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s6_p2: s6-p2@df {
+				reg = <0xdf 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2: s7-p2@e0 {
+				reg = <0xe0 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s8_p2: s8-p2@e0 {
+				reg = <0xe0 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s9_p2: s9-p2@e1 {
+				reg = <0xe1 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s10_p2: s10-p2@e2 {
+				reg = <0xe2 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s5_p2_backup: s5-p2-backup@e3 {
+				reg = <0xe3 0x2>;
+				bits = <0 6>;
+			};
+
+			tsens_mode_backup: mode-backup@e3 {
+				reg = <0xe3 0x1>;
+				bits = <6 2>;
+			};
+
+			tsens_s6_p2_backup: s6-p2-backup@e4 {
+				reg = <0xe4 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2_backup: s7-p2-backup@e4 {
+				reg = <0xe4 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s8_p2_backup: s8-p2-backup@e5 {
+				reg = <0xe5 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s9_p2_backup: s9-p2-backup@e6 {
+				reg = <0xe6 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s10_p2_backup: s10-p2-backup@e7 {
+				reg = <0xe7 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_base1_backup: base1-backup@440 {
+				reg = <0x440 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s0_p1_backup: s0-p1-backup@441 {
+				reg = <0x441 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s1_p1_backup: s1-p1-backup@442 {
+				reg = <0x441 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s2_p1_backup: s2-p1-backup@442 {
+				reg = <0x442 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p1_backup: s3-p1-backup@443 {
+				reg = <0x443 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s4_p1_backup: s4-p1-backup@444 {
+				reg = <0x444 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p1_backup: s5-p1-backup@444 {
+				reg = <0x444 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1_backup: s6-p1-backup@445 {
+				reg = <0x445 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s7_p1_backup: s7-p1-backup@446 {
+				reg = <0x446 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_use_backup: use-backup@447 {
+				reg = <0x447 0x1>;
+				bits = <5 3>;
+			};
+
+			tsens_s8_p1_backup: s8-p1-backup@448 {
+				reg = <0x448 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s9_p1_backup: s9-p1-backup@448 {
+				reg = <0x448 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s10_p1_backup: s10-p1-backup@449 {
+				reg = <0x449 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_base2_backup: base2-backup@44a {
+				reg = <0x44a 0x2>;
+				bits = <2 8>;
+			};
+
+			tsens_s0_p2_backup: s0-p2-backup@44b {
+				reg = <0x44b 0x3>;
+				bits = <2 6>;
+			};
+
+			tsens_s1_p2_backup: s1-p2-backup@44c {
+				reg = <0x44c 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s2_p2_backup: s2-p2-backup@44c {
+				reg = <0x44c 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s3_p2_backup: s3-p2-backup@44d {
+				reg = <0x44d 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s4_p2_backup: s4-p2-backup@44e {
+				reg = <0x44e 0x1>;
+				bits = <2 6>;
+			};
+		};
+
+		spmi_bus: spmi@fc4cf000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg-names = "core", "intr", "cnfg";
+			reg = <0xfc4cf000 0x1000>,
+			      <0xfc4cb000 0x1000>,
+			      <0xfc4ca000 0x1000>;
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		bam_dmux_dma: dma-controller@fc834000 {
+			compatible = "qcom,bam-v1.4.0";
+			reg = <0xfc834000 0x7000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+		};
+
+		remoteproc_mss: remoteproc@fc880000 {
+			compatible = "qcom,msm8974-mss-pil";
+			reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "bus", "mem", "xo";
+
+			resets = <&gcc GCC_MSS_RESTART>;
+			reset-names = "mss_restart";
+
+			qcom,halt-regs = <&tcsr_mutex 0x1180 0x1200 0x1280>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_region>;
+			};
+
+			mpss {
+				memory-region = <&mpss_region>;
+			};
+
+			bam_dmux: bam-dmux {
+				compatible = "qcom,bam-dmux";
+
+				interrupt-parent = <&modem_smsm>;
+				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+				interrupt-names = "pc", "pc-ack";
+
+				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+				qcom,smem-state-names = "pc", "pc-ack";
+
+				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+				dma-names = "tx", "rx";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&apcs 12>;
+				qcom,smd-edge = <0>;
+
+				label = "modem";
+			};
+		};
+
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,msm8974-tcsr-mutex", "qcom,tcsr-mutex", "syscon";
+			reg = <0xfd484000 0x2000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@fd4a0000 {
+			compatible = "qcom,tcsr-msm8974", "syscon";
+			reg = <0xfd4a0000 0x10000>;
+		};
+
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,msm8974-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			sdc1_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			sdc2_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				rx-pins {
+					pins = "gpio5";
+					function = "blsp_uart2";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				tx-pins {
+					pins = "gpio4";
+					function = "blsp_uart2";
+					drive-strength = <4>;
+					bias-disable;
+				};
+			};
+
+			blsp2_uart1_default: blsp2-uart1-default-state {
+				tx-rts-pins {
+					pins = "gpio41", "gpio44";
+					function = "blsp_uart7";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-cts-pins {
+					pins = "gpio42", "gpio43";
+					function = "blsp_uart7";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			blsp2_uart1_sleep: blsp2-uart1-sleep-state {
+				pins = "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp2_uart4_default: blsp2-uart4-default-state {
+				tx-rts-pins {
+					pins = "gpio53", "gpio56";
+					function = "blsp_uart10";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-cts-pins {
+					pins = "gpio54", "gpio55";
+					function = "blsp_uart10";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			blsp1_i2c1_default: blsp1-i2c1-default-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c1_sleep: blsp1-i2c1-sleep-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			/* BLSP1_I2C4 info is missing */
+
+			/* BLSP1_I2C5 info is missing */
+
+			blsp1_i2c6_default: blsp1-i2c6-default-state {
+				pins = "gpio29", "gpio30";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
+				pins = "gpio29", "gpio30";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+			/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
+
+			/* BLSP2_I2C1 info is missing */
+
+			blsp2_i2c2_default: blsp2-i2c2-default-state {
+				pins = "gpio47", "gpio48";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
+				pins = "gpio47", "gpio48";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			/* BLSP2_I2C3 info is missing */
+
+			/* BLSP2_I2C4 info is missing */
+
+			blsp2_i2c5_default: blsp2-i2c5-default-state {
+				pins = "gpio83", "gpio84";
+				function = "blsp_i2c11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
+				pins = "gpio83", "gpio84";
+				function = "blsp_i2c11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp2_i2c6_default: blsp2-i2c6-default-state {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci_default: cci-default-state {
+				cci_i2c0_default: cci-i2c0-default-pins {
+					pins = "gpio19", "gpio20";
+					function = "cci_i2c0";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cci_i2c1_default: cci-i2c1-default-pins {
+					pins = "gpio21", "gpio22";
+					function = "cci_i2c1";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cci_sleep: cci-sleep-state {
+				cci_i2c0_sleep: cci-i2c0-sleep-pins {
+					pins = "gpio19", "gpio20";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cci_i2c1_sleep: cci-i2c1-sleep-pins {
+					pins = "gpio21", "gpio22";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			spi8_default: spi8_default-state {
+				mosi-pins {
+					pins = "gpio45";
+					function = "blsp_spi8";
+				};
+				miso-pins {
+					pins = "gpio46";
+					function = "blsp_spi8";
+				};
+				cs-pins {
+					pins = "gpio47";
+					function = "blsp_spi8";
+				};
+				clk-pins {
+					pins = "gpio48";
+					function = "blsp_spi8";
+				};
+			};
+		};
+
+		mmcc: clock-controller@fd8c0000 {
+			compatible = "qcom,mmcc-msm8974";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfd8c0000 0x6000>;
+			clocks = <&xo_board>,
+				 <&gcc GCC_MMSS_GPLL0_CLK_SRC>,
+				 <&gcc GPLL0_VOTE>,
+				 <&gcc GPLL1_VOTE>,
+				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "xo",
+				      "mmss_gpll0_vote",
+				      "gpll0_vote",
+				      "gpll1_vote",
+				      "gfx3d_clk_src",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "dsi1pll",
+				      "dsi1pllbyte",
+				      "hdmipll",
+				      "edp_link_clk",
+				      "edp_vco_div";
+		};
+
+		mdss: display-subsystem@fd900000 {
+			compatible = "qcom,mdss";
+			reg = <0xfd900000 0x100>, <0xfd924000 0x1000>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>;
+			clock-names = "iface", "bus", "vsync";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mdp: display-controller@fd900000 {
+				compatible = "qcom,msm8974-mdp5", "qcom,mdp5";
+				reg = <0xfd900100 0x22000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_VSYNC_CLK>;
+				clock-names = "iface", "bus", "core", "vsync";
+
+				interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
+				interconnect-names = "mdp0-mem";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdp5_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@fd922800 {
+				compatible = "qcom,msm8974-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0xfd922800 0x1f8>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+						  <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_BYTE0_CLK>,
+					 <&mmcc MDSS_PCLK0_CLK>,
+					 <&mmcc MDSS_ESC0_CLK>,
+					 <&mmcc MMSS_MISC_AHB_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core",
+					      "core_mmss";
+
+				phys = <&mdss_dsi0_phy>;
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@fd922a00 {
+				compatible = "qcom,dsi-phy-28nm-hpm";
+				reg = <0xfd922a00 0xd4>,
+				      <0xfd922b00 0x280>,
+				      <0xfd922d80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@fd922e00 {
+				compatible = "qcom,msm8974-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0xfd922e00 0x1f8>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
+						  <&mmcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_BYTE1_CLK>,
+					 <&mmcc MDSS_PCLK1_CLK>,
+					 <&mmcc MDSS_ESC1_CLK>,
+					 <&mmcc MMSS_MISC_AHB_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core",
+					      "core_mmss";
+
+				phys = <&mdss_dsi1_phy>;
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&mdp5_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@fd923000 {
+				compatible = "qcom,dsi-phy-28nm-hpm";
+				reg = <0xfd923000 0xd4>,
+				      <0xfd923100 0x280>,
+				      <0xfd923380 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		cci: cci@fda0c000 {
+			compatible = "qcom,msm8974-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfda0c000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci_default>;
+			pinctrl-1 = <&cci_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <100000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <100000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gpu: gpu@fdb00000 {
+			compatible = "qcom,adreno-330.1", "qcom,adreno";
+			reg = <0xfdb00000 0x10000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+
+			clocks = <&mmcc OXILI_GFX3D_CLK>,
+				 <&mmcc OXILICX_AHB_CLK>,
+				 <&mmcc OXILICX_AXI_CLK>;
+			clock-names = "core", "iface", "mem_iface";
+
+			sram = <&gmu_sram>;
+			power-domains = <&mmcc OXILICX_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
+					<&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
+			interconnect-names = "gfx-mem", "ocmem";
+
+			// iommus = <&gpu_iommu 0>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+				};
+
+				opp-27000000 {
+					opp-hz = /bits/ 64 <27000000>;
+				};
+			};
+		};
+
+		sram@fdd00000 {
+			compatible = "qcom,msm8974-ocmem";
+			reg = <0xfdd00000 0x2000>,
+			      <0xfec00000 0x180000>;
+			reg-names = "ctrl", "mem";
+			ranges = <0 0xfec00000 0x180000>;
+			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+				 <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+			clock-names = "core", "iface";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gmu_sram: gmu-sram@0 {
+				reg = <0x0 0x100000>;
+			};
+		};
+
+		remoteproc_adsp: remoteproc@fe200000 {
+			compatible = "qcom,msm8974-adsp-pil";
+			reg = <0xfe200000 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			clocks = <&xo_board>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_region>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			smd-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&apcs 8>;
+				qcom,smd-edge = <1>;
+				label = "lpass";
+			};
+		};
+
+		imem: sram@fe805000 {
+			compatible = "qcom,msm8974-imem", "syscon", "simple-mfd";
+			reg = <0xfe805000 0x1000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x65c>;
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				q6_dsp_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modemtx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				modemtx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <19200000>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
index ff6e0066768b..fe227fd3f908 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
@@ -1,14 +1,15 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "Fairphone 2";
-	compatible = "fairphone,fp2", "qcom,msm8974";
+	compatible = "fairphone,fp2", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
 
 	aliases {
 		mmc0 = &sdhc_1;
@@ -56,6 +57,33 @@
 		enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
 		vcc-supply = <&pm8941_l18>;
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c2 {
@@ -85,31 +113,6 @@
 	};
 };
 
-&otg {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-
-	ulpi {
-		phy@a {
-			status = "okay";
-
-			v1p8-supply = <&pm8941_l6>;
-			v3p3-supply = <&pm8941_l24>;
-
-			extcon = <&smbb>;
-			qcom,init-seq = /bits/ 8 <0x1 0x64>;
-		};
-	};
-};
-
 &pm8941_gpios {
 	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio1", "gpio2", "gpio5";
@@ -190,7 +193,7 @@
 };
 
 &rpm_requests {
-	pm8841-regulators {
+	regulators-0 {
 		compatible = "qcom,rpm-pm8841-regulators";
 
 		pm8841_s1: s1 {
@@ -209,7 +212,7 @@
 		};
 	};
 
-	pm8941-regulators {
+	regulators-1 {
 		compatible = "qcom,rpm-pm8941-regulators";
 
 		vdd_l1_l3-supply = <&pm8941_s1>;
@@ -405,47 +408,49 @@
 	qcom,fast-charge-high-threshold-voltage = <4350000>;
 	qcom,auto-recharge-threshold-voltage = <4240000>;
 	qcom,minimum-input-voltage = <4450000>;
+
+	status = "okay";
 };
 
 &tlmm {
-	sdc1_on: sdc1-on {
-		clk {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
 			pins = "sdc1_clk";
 			drive-strength = <16>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc1_cmd", "sdc1_data";
 			drive-strength = <10>;
 			bias-pull-up;
 		};
 	};
 
-	sdc2_on: sdc2-on {
-		clk {
+	sdc2_on: sdc2-on-state {
+		clk-pins {
 			pins = "sdc2_clk";
 			drive-strength = <10>;
 			bias-disable;
 		};
 
-		cmd-data {
+		cmd-data-pins {
 			pins = "sdc2_cmd", "sdc2_data";
 			drive-strength = <6>;
 			bias-pull-up;
 		};
 	};
 
-	wcnss_pin_a: wcnss-pin-active {
-		wlan {
-			pins =  "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+	wcnss_pin_a: wcnss-pin-active-state {
+		wlan-pins {
+			pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
 			function = "wlan";
 
 			drive-strength = <6>;
 			bias-pull-down;
 		};
 
-		bt {
+		bt-pins {
 			pins = "gpio35", "gpio43", "gpio44";
 			function = "bt";
 
@@ -453,7 +458,7 @@
 			bias-pull-down;
 		};
 
-		fm {
+		fm-pins {
 			pins = "gpio41", "gpio42";
 			function = "fm";
 
@@ -462,3 +467,26 @@
 		};
 	};
 };
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
new file mode 100644
index 000000000000..b896cc1ad6f7
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "qcom-msm8974pro.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "HTC One (M8)";
+	compatible = "htc,m8", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <20>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <20>;
+			wakeup-source;
+		};
+	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&boost_bypass_n_pin>;
+		pinctrl-names = "default";
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+};
+
+&pm8941_vib {
+	status = "okay";
+};
+
+&pronto {
+	vddmx-supply = <&pm8841_s1>;
+	vddcx-supply = <&pm8841_s2>;
+	vddpx-supply = <&pm8941_s3>;
+
+	pinctrl-0 = <&wcnss_pin_a>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	iris {
+		vddxo-supply = <&pm8941_l6>;
+		vddrfa-supply = <&pm8941_l11>;
+		vddpa-supply = <&pm8941_l19>;
+		vdddig-supply = <&pm8941_s3>;
+	};
+
+	smd-edge {
+		qcom,remote-pid = <4>;
+		label = "pronto";
+
+		wcnss {
+			status = "okay";
+		};
+	};
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <815000>;
+			regulator-max-microvolt = <900000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&smbb {
+	status = "okay";
+};
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio27", "gpio28";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	wcnss_pin_a: wcnss-pin-active-state {
+		pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+		function = "wlan";
+		drive-strength = <6>;
+		bias-pull-down;
+	};
+};
+
+&usb {
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+
+	status = "okay";
+};
+
+&usb_hs1_phy {
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x63>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
new file mode 100644
index 000000000000..88ff6535477b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
@@ -0,0 +1,544 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "OnePlus One";
+	compatible = "oneplus,bacon", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
+	qcom,msm-id = <194 0x10000>;
+	qcom,board-id = <8 0>;
+
+	aliases {
+		mmc0 = &sdhc_1;
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>, <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			debounce-interval = <150>;
+		};
+	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27541";
+		reg = <0x55>;
+		power-supplies = <&bq24196_charger>;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	rmi4-i2c-dev@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		syna,startup-delay-ms = <100>;
+
+		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8941_l22>;
+		vio-supply = <&pm8941_lvs3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_default_state>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			/*
+			 * Touchscreen size is 2040x1080, y-values between
+			 * 1920-2040 are used for touchkey (menu, home & back).
+			 * For now clip it off so we don't get touch events
+			 * outside of the display area.
+			 */
+			syna,clip-y-high = <1920>;
+		};
+	};
+
+	led-controller@36 {
+		compatible = "ti,lm3630a";
+		reg = <0x36>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0 1>;
+			label = "lcd-backlight";
+			default-brightness = <80>;
+		};
+	};
+
+	led-controller@68 {
+		compatible = "si-en,sn3193";
+		reg = <0x68>;
+
+		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			label = "red:status";
+			led-max-microamp = <17500>;
+		};
+
+		led@2 {
+			reg = <2>;
+			label = "green:status";
+			led-max-microamp = <17500>;
+		};
+
+		led@3 {
+			reg = <3>;
+			label = "blue:status";
+			led-max-microamp = <17500>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	bq24196_charger: charger@6b {
+		compatible = "ti,bq24196";
+		reg = <0x6b>;
+		interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+		omit-battery-class;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&gcc {
+	compatible = "qcom,gcc-msm8974pro-ac";
+};
+
+&pm8941_coincell {
+	qcom,rset-ohms = <800>;
+	qcom,vset-millivolts = <3200>;
+
+	status = "okay";
+};
+
+&pm8941_gpios {
+	gpio_keys_default: gpio-keys-active-state {
+		pins = "gpio2", "gpio5";
+		function = "normal";
+		input-enable;
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+};
+
+&pm8941_vib {
+	status = "okay";
+};
+
+&pronto {
+	vddmx-supply = <&pm8841_s1>;
+	vddcx-supply = <&pm8841_s2>;
+	vddpx-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&wcnss_pin_a>;
+
+	status = "okay";
+
+	iris {
+		vddxo-supply = <&pm8941_l6>;
+		vddrfa-supply = <&pm8941_l11>;
+		vddpa-supply = <&pm8941_l19>;
+		vdddig-supply = <&pm8941_s3>;
+	};
+
+	smd-edge {
+		qcom,remote-pid = <4>;
+		label = "pronto";
+
+		wcnss {
+			status = "okay";
+		};
+	};
+};
+
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <875000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <154000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_lvs3: lvs3 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+
+	status = "okay";
+};
+
+&smbb {
+	status = "okay";
+};
+
+&tlmm {
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio68";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <4>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+	};
+
+	touch_default_state: touch-default-state {
+		int-pins {
+			pins = "gpio61";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		reset-pins {
+			pins = "gpio60";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	wcnss_pin_a: wcnss-pin-active-state {
+		wlan-pins {
+			pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+			function = "wlan";
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+
+		bt-pins {
+			pins = "gpio35", "gpio43", "gpio44";
+			function = "bt";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
+
+&usb {
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+
+	status = "okay";
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi
new file mode 100644
index 000000000000..d3959741d2ea
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi
@@ -0,0 +1,831 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "pma8084.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_3; /* SDC2 SD card slot */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-home {
+			label = "home_key";
+			gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	i2c-gpio-touchkey {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_touchkey_pins>;
+
+		touchkey@20 {
+			compatible = "cypress,tm2-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&pma8084_gpios>;
+			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&touchkey_pin>;
+
+			vcc-supply = <&max77826_ldo15>;
+			vdd-supply = <&pma8084_l19>;
+
+			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+		};
+	};
+
+	i2c_led_gpio: i2c-gpio-led {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_led_gpioex_pins>;
+
+		i2c-gpio,delay-us = <2>;
+
+		gpio_expander: gpio@20 {
+			compatible = "nxp,pcal6416";
+			reg = <0x20>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			vcc-supply = <&pma8084_s4>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpioex_pin>;
+
+			reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+		};
+
+		led-controller@30 {
+			compatible = "panasonic,an30259a";
+			reg = <0x30>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@1 {
+				reg = <1>;
+				function = LED_FUNCTION_STATUS;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@2 {
+				reg = <2>;
+				function = LED_FUNCTION_STATUS;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@3 {
+				reg = <3>;
+				function = LED_FUNCTION_STATUS;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vreg_panel: panel-regulator {
+		compatible = "regulator-fixed";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_en_pin>;
+
+		regulator-name = "panel-vddr-reg";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupt-parent = <&pma8084_gpios>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&max77826_ldo13>;
+		vio-supply = <&pma8084_lvs2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pin>;
+
+		syna,startup-delay-ms = <100>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	pmic@60 {
+		reg = <0x60>;
+		compatible = "maxim,max77826";
+
+		regulators {
+			max77826_ldo1: LDO1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			max77826_ldo2: LDO2 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			max77826_ldo3: LDO3 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			max77826_ldo4: LDO4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo5: LDO5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo6: LDO6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo7: LDO7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo8: LDO8 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo9: LDO9 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo10: LDO10 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2950000>;
+			};
+
+			max77826_ldo11: LDO11 {
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2950000>;
+			};
+
+			max77826_ldo12: LDO12 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo13: LDO13 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo14: LDO14 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo15: LDO15 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_buck: BUCK {
+				regulator-min-microvolt = <1225000>;
+				regulator-max-microvolt = <1225000>;
+			};
+
+			max77826_buckboost: BUCKBOOST {
+				regulator-min-microvolt = <3400000>;
+				regulator-max-microvolt = <3400000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c6 {
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max17048";
+		reg = <0x36>;
+
+		maxim,double-soc;
+		maxim,rcomp = /bits/ 8 <0x56>;
+
+		interrupt-parent = <&pma8084_gpios>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fuelgauge_pin>;
+	};
+};
+
+&blsp2_uart2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_pins_active>;
+	pinctrl-1 = <&blsp2_uart2_pins_sleep>;
+
+	bluetooth {
+		compatible = "brcm,bcm43540-bt";
+		max-speed = <3000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins>;
+		device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wakeup";
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+
+	vdda-supply = <&pma8084_l2>;
+	vdd-supply = <&pma8084_l22>;
+	vddio-supply = <&pma8084_l12>;
+
+	panel: panel@0 {
+		reg = <0>;
+		compatible = "samsung,s6e3fa2";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
+
+		iovdd-supply = <&pma8084_lvs4>;
+		vddr-supply = <&vreg_panel>;
+
+		reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+
+	vddio-supply = <&pma8084_l12>;
+};
+
+&pma8084_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio3", "gpio5";
+		function = "normal";
+
+		bias-pull-up;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+
+	touchkey_pin: touchkey-int-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+
+	touch_pin: touchscreen-int-state {
+		pins = "gpio8";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+
+	panel_en_pin: panel-en-state {
+		pins = "gpio14";
+		function = "normal";
+		bias-pull-up;
+		power-source = <PMA8084_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+
+	wlan_sleep_clk_pin: wlan-sleep-clk-state {
+		pins = "gpio16";
+		function = "func2";
+
+		output-high;
+		power-source = <PMA8084_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+
+	panel_rst_pin: panel-rst-state {
+		pins = "gpio17";
+		function = "normal";
+		bias-disable;
+		power-source = <PMA8084_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+
+	fuelgauge_pin: fuelgauge-int-state {
+		pins = "gpio21";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+};
+
+&reserved_memory {
+	ramoops@3e8e0000 {
+		compatible = "ramoops";
+		reg = <0x3e8e0000 0x200000>;
+
+		console-size = <0x100000>;
+		record-size = <0x10000>;
+		ftrace-size = <0x10000>;
+		pmsg-size = <0x80000>;
+		ecc-size = <8>;
+	};
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	cx-supply = <&pma8084_s2>;
+};
+
+&remoteproc_mss {
+	status = "okay";
+	cx-supply = <&pma8084_s2>;
+	mss-supply = <&pma8084_s6>;
+	mx-supply = <&pma8084_s1>;
+	pll-supply = <&pma8084_l12>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pma8084-regulators";
+
+		pma8084_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+		};
+
+		pma8084_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pma8084_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pma8084_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pma8084_s6: s6 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pma8084_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pma8084_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pma8084_l3: l3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pma8084_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pma8084_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pma8084_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pma8084_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pma8084_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pma8084_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pma8084_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pma8084_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pma8084_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pma8084_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pma8084_l19: l19 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pma8084_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pma8084_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pma8084_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pma8084_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pma8084_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pma8084_l25: l25 {
+			regulator-min-microvolt = <2100000>;
+			regulator-max-microvolt = <2100000>;
+		};
+
+		pma8084_l26: l26 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pma8084_l27: l27 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pma8084_lvs1: lvs1 {};
+		pma8084_lvs2: lvs2 {};
+		pma8084_lvs3: lvs3 {};
+		pma8084_lvs4: lvs4 {};
+
+		pma8084_5vs1: 5vs1 {};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pma8084_l20>;
+	vqmmc-supply = <&pma8084_s4>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+	max-frequency = <100000000>;
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pma8084_s4>;
+	non-removable;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+
+	wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+
+		/*
+		 * Allow all klte* variants to load the same NVRAM file,
+		 * as they have little difference in the WiFi part.
+		 */
+		brcm,board-type = "samsung,klte";
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
+	};
+};
+
+&sdhc_3 {
+	status = "okay";
+	max-frequency = <100000000>;
+	vmmc-supply = <&pma8084_l21>;
+	vqmmc-supply = <&pma8084_l13>;
+
+	/*
+	 * cd-gpio is intentionally disabled. If enabled, an SD card
+	 * present during boot is not initialized correctly. Without
+	 * cd-gpios the driver resorts to polling, so hotplug works.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>;
+	/* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
+};
+
+&tlmm {
+	/* This seems suspicious, but somebody with this device should look into it. */
+	blsp2_uart2_pins_active: blsp2-uart2-pins-active-state {
+		pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		function = "blsp_uart8";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state {
+		pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	bt_pins: bt-pins-state {
+		hostwake-pins {
+			pins = "gpio75";
+			function = "gpio";
+			drive-strength = <16>;
+		};
+
+		devwake-pins {
+			pins = "gpio91";
+			function = "gpio";
+			drive-strength = <2>;
+		};
+	};
+
+	sdc1_on: sdhc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <4>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+	};
+
+	sdc3_on: sdc3-on-state {
+		pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+		function = "sdc3";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sdhc3_cd_pin: sdc3-cd-on-state {
+		pins = "gpio62";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_on: sdhc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	i2c_touchkey_pins: i2c-touchkey-state {
+		pins = "gpio95", "gpio96";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	i2c_led_gpioex_pins: i2c-led-gpioex-state {
+		function = "gpio";
+		bias-pull-down;
+	};
+
+	gpioex_pin: gpioex-state {
+		pins = "gpio145";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	wifi_pin: wifi-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-pull-down;
+	};
+
+	panel_te_pin: panel-state {
+		pins = "gpio12";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pma8084_l6>;
+	v3p3-supply = <&pma8084_l24>;
+
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
new file mode 100644
index 000000000000..954665f3a9dd
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro-samsung-klte-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy S5";
+	compatible = "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";
+};
+
+&i2c_led_gpio {
+	scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c_led_gpioex_pins {
+	pins = "gpio120", "gpio121";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-kltechn.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-kltechn.dts
new file mode 100644
index 000000000000..b902e31b16c2
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-kltechn.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro-samsung-klte-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy S5 China";
+	compatible = "samsung,kltechn", "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";
+};
+
+&i2c_led_gpio {
+	scl-gpios = <&tlmm 61 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&tlmm 60 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c_led_gpioex_pins {
+	pins = "gpio60", "gpio61";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-aries.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-aries.dts
new file mode 100644
index 000000000000..2621c5928b6a
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-aries.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi"
+
+/ {
+	model = "Sony Xperia Z3 Compact";
+	compatible = "sony,xperia-aries", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
+
+	gpio-keys {
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+		};
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+		};
+	};
+};
+
+&gpio_keys_pin_a {
+	pins = "gpio2", "gpio3", "gpio4", "gpio5";
+};
+
+&smbb {
+	usb-charge-current-limit = <1500000>;
+	qcom,fast-charge-safe-current = <2100000>;
+	qcom,fast-charge-current-limit = <1800000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4280000>;
+	qcom,minimum-input-voltage = <4200000>;
+
+	status = "okay";
+};
+
+&synaptics_touchscreen {
+	vio-supply = <&pm8941_s3>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
new file mode 100644
index 000000000000..409d1798de34
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi"
+
+/ {
+	model = "Sony Xperia Z2 Tablet";
+	compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "tablet";
+
+	vreg_bl_vddio: lcd-backlight-vddio {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bl_vddio";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		gpio = <&tlmm 69 0>;
+		enable-active-high;
+
+		vin-supply = <&pm8941_s3>;
+		startup-delay-us = <70000>;
+
+		pinctrl-0 = <&lcd_backlight_en_pin_a>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp2_i2c5 {
+	clock-frequency = <355000>;
+
+	status = "okay";
+
+	lp8566_wled: backlight@2c {
+		compatible = "ti,lp8556";
+		reg = <0x2c>;
+		power-supply = <&vreg_bl_vddio>;
+
+		bl-name = "backlight";
+		dev-ctrl = /bits/ 8 <0x05>;
+		init-brt = /bits/ 8 <0x3f>;
+
+		rom-a0h {
+			rom-addr = /bits/ 8 <0xa0>;
+			rom-val = /bits/ 8 <0xff>;
+		};
+
+		rom-a1h {
+			rom-addr = /bits/ 8 <0xa1>;
+			rom-val = /bits/ 8 <0x3f>;
+		};
+
+		rom-a2h {
+			rom-addr = /bits/ 8 <0xa2>;
+			rom-val = /bits/ 8 <0x20>;
+		};
+
+		rom-a3h {
+			rom-addr = /bits/ 8 <0xa3>;
+			rom-val = /bits/ 8 <0x5e>;
+		};
+
+		rom-a4h {
+			rom-addr = /bits/ 8 <0xa4>;
+			rom-val = /bits/ 8 <0x02>;
+		};
+
+		rom-a5h {
+			rom-addr = /bits/ 8 <0xa5>;
+			rom-val = /bits/ 8 <0x04>;
+		};
+
+		rom-a6h {
+			rom-addr = /bits/ 8 <0xa6>;
+			rom-val = /bits/ 8 <0x80>;
+		};
+
+		rom-a7h {
+			rom-addr = /bits/ 8 <0xa7>;
+			rom-val = /bits/ 8 <0xf7>;
+		};
+
+		rom-a9h {
+			rom-addr = /bits/ 8 <0xa9>;
+			rom-val = /bits/ 8 <0x80>;
+		};
+
+		rom-aah {
+			rom-addr = /bits/ 8 <0xaa>;
+			rom-val = /bits/ 8 <0x0f>;
+		};
+
+		rom-aeh {
+			rom-addr = /bits/ 8 <0xae>;
+			rom-val = /bits/ 8 <0x0f>;
+		};
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+
+		pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
+		pinctrl-names = "default";
+
+		host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pm8941_gpios {
+	bt_reg_on_pin: bt-reg-on-state {
+		pins = "gpio16";
+		function = "normal";
+		output-low;
+		power-source = <PM8941_GPIO_S3>;
+	};
+};
+
+&rpm_requests {
+	regulators-1 {
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+	};
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1500000>;
+	qcom,fast-charge-current-limit = <1500000>;
+	qcom,dc-current-limit = <1800000>;
+	usb-charge-current-limit = <1800000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,fast-charge-low-threshold-voltage = <3400000>;
+	qcom,auto-recharge-threshold-voltage = <4200000>;
+	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
+};
+
+&synaptics_touchscreen {
+	vio-supply = <&pm8941_lvs3>;
+};
+
+&tlmm {
+	bt_dev_wake_pin: bt-dev-wake-state {
+		pins = "gpio96";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	bt_host_wake_pin: bt-host-wake-state {
+		pins = "gpio95";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
+		pins = "gpio69";
+		function = "gpio";
+		drive-strength = <10>;
+		output-low;
+		bias-disable;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi
new file mode 100644
index 000000000000..6af7c71c7158
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi
@@ -0,0 +1,541 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+		serial0 = &blsp1_uart2;
+		serial1 = &blsp2_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_pin_a>;
+		pinctrl-names = "default";
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	vreg_vsp: lcd-dcdc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_vsp";
+		regulator-min-microvolt = <5600000>;
+		regulator-max-microvolt = <5600000>;
+
+		gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
+		pinctrl-names = "default";
+	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wlan_regulator_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c2 {
+	clock-frequency = <355000>;
+
+	status = "okay";
+
+	synaptics_touchscreen: synaptics@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd-supply = <&pm8941_l22>;
+		/* vio-supply is set in dts */
+
+		pinctrl-0 = <&ts_int_pin>;
+		pinctrl-names = "default";
+
+		syna,startup-delay-ms = <100>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+			touchscreen-inverted-x;
+		};
+	};
+};
+
+&pm8941_coincell {
+	qcom,rset-ohms = <2100>;
+	qcom,vset-millivolts = <3000>;
+
+	status = "okay";
+};
+
+&pm8941_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio5";
+		function = "normal";
+		bias-pull-up;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	wlan_sleep_clk_pin: wl-sleep-clk-state {
+		pins = "gpio17";
+		function = "func2";
+		output-high;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	wlan_regulator_pin: wl-reg-active-state {
+		pins = "gpio18";
+		function = "normal";
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
+		pins = "gpio20";
+		function = "normal";
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+		input-disable;
+		output-low;
+	};
+};
+
+&pm8941_lpg {
+	qcom,power-source = <1>;
+
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@6 {
+			reg = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@7 {
+			reg = <7>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
+&pm8941_vib {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+	status = "okay";
+};
+
+&remoteproc_mss {
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <154000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s4: s4 {
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <500000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <500000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
+		};
+
+		pm8941_lvs3: lvs3 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l13>;
+
+	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sdhc_3 {
+	max-frequency = <100000000>;
+	vmmc-supply = <&vreg_wlan>;
+	non-removable;
+
+	pinctrl-0 = <&sdc3_on>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		brcm,drive-strength = <10>;
+
+		pinctrl-0 = <&wlan_sleep_clk_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&tlmm {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+
+		cd-pins {
+			pins = "gpio62";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	sdc3_on: sdc3-on-state {
+		clk-pins {
+			pins = "gpio40";
+			function = "sdc3";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio39";
+			function = "sdc3";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio35", "gpio36", "gpio37", "gpio38";
+			function = "sdc3";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	ts_int_pin: ts-int-pin-state {
+		pins = "gpio86";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb {
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+
+	status = "okay";
+};
+
+&usb_hs1_phy {
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts
new file mode 100644
index 000000000000..1ed6e1cc21d5
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi"
+
+/ {
+	model = "Sony Xperia Z3";
+	compatible = "sony,xperia-leo", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
+
+	gpio-keys {
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+		};
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+		};
+	};
+};
+
+&gpio_keys_pin_a {
+	pins = "gpio2", "gpio3", "gpio4", "gpio5";
+};
+
+&smbb {
+	usb-charge-current-limit = <1500000>;
+	qcom,fast-charge-safe-current = <3000000>;
+	qcom,fast-charge-current-limit = <2150000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4280000>;
+	qcom,minimum-input-voltage = <4200000>;
+
+	status = "okay";
+};
+
+&synaptics_touchscreen {
+	vio-supply = <&pm8941_s3>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974pro.dtsi
new file mode 100644
index 000000000000..58df6e75ab6d
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974.dtsi"
+
+&gcc {
+	compatible = "qcom,gcc-msm8974pro";
+};
+
+&gpu {
+	compatible = "qcom,adreno-330.2", "qcom,adreno";
+};
+
+&sdhc_1 {
+	clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+		 <&gcc GCC_SDCC1_APPS_CLK>,
+		 <&xo_board>,
+		 <&gcc GCC_SDCC1_CDCCAL_FF_CLK>,
+		 <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>;
+	clock-names = "iface", "core", "xo", "cal", "sleep";
+};
diff --git a/arch/arm/boot/dts/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
index 9649c1e11311..247069361909 100644
--- a/arch/arm/boot/dts/qcom-sdx55-mtp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts
@@ -9,7 +9,7 @@
 #include "qcom-sdx55.dtsi"
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <arm64/qcom/pm8150b.dtsi>
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDX55 MTP";
@@ -75,7 +75,7 @@
 };
 
 &apps_rsc {
-	pmx55-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pmx55-rpmh-regulators";
 		qcom,pmic-id = "e";
 
@@ -229,6 +229,10 @@
 	};
 };
 
+&remoteproc_mpss {
+	memory-region = <&mpss_adsp_mem>;
+};
+
 &usb {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
index 7ed8feb99afb..082f7ed1a01f 100644
--- a/arch/arm/boot/dts/qcom-sdx55-t55.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Thundercomm T55 Development Kit";
@@ -98,7 +98,7 @@
 };
 
 &apps_rsc {
-	pmx55-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pmx55-rpmh-regulators";
 		qcom,pmic-id = "e";
 
@@ -233,21 +233,38 @@
 };
 
 &blsp1_uart3 {
-	status = "ok";
+	status = "okay";
 };
 
 &ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
 	status = "okay";
+};
 
-	memory-region = <&ipa_fw_mem>;
+&pcie_phy {
+	vdda-phy-supply = <&vreg_l1e_bb_1p2>;
+	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
+
+	status = "okay";
+};
+
+&pcie_rc {
+	perst-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
 };
 
 &qpic_bam {
-	status = "ok";
+	status = "okay";
 };
 
 &qpic_nand {
-	status = "ok";
+	status = "okay";
 
 	nand@0 {
 		reg = <0>;
@@ -261,21 +278,48 @@
 };
 
 &remoteproc_mpss {
-	status = "okay";
 	memory-region = <&mpss_adsp_mem>;
+	status = "okay";
+};
+
+&tlmm {
+	pcie_default: pcie-default-state {
+		clkreq-pins {
+			pins = "gpio56";
+			function = "pcie_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio57";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-pins {
+		       pins = "gpio53";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+	       };
+	};
 };
 
 &usb_hsphy {
-	status = "okay";
 	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
 	vdda33-supply = <&vreg_l10e_3p1>;
 	vdda18-supply = <&vreg_l5e_bb_1p7>;
+
+	status = "okay";
 };
 
 &usb_qmpphy {
-	status = "okay";
 	vdda-phy-supply = <&vreg_l4e_bb_0p875>;
 	vdda-pll-supply = <&vreg_l1e_bb_1p2>;
+
+	status = "okay";
 };
 
 &usb {
diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
index a4fa468a095f..e336a15b45c4 100644
--- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts
@@ -8,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "qcom-sdx55.dtsi"
-#include "qcom-pmx55.dtsi"
+#include "pmx55.dtsi"
 
 / {
 	model = "Telit FN980 TLB";
@@ -98,7 +98,7 @@
 };
 
 &apps_rsc {
-	pmx55-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pmx55-rpmh-regulators";
 		qcom,pmic-id = "e";
 
@@ -233,36 +233,39 @@
 };
 
 &blsp1_uart3 {
-	status = "ok";
+	status = "okay";
 };
 
 &ipa {
-	status = "okay";
-
+	qcom,gsi-loader = "self";
 	memory-region = <&ipa_fw_mem>;
-};
-
-&pcie0_phy {
 	status = "okay";
+};
 
+&pcie_phy {
 	vdda-phy-supply = <&vreg_l1e_bb_1p2>;
 	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
-};
 
-&pcie_ep {
 	status = "okay";
+};
 
+&pcie_ep {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_ep_clkreq_default &pcie_ep_perst_default
 		     &pcie_ep_wake_default>;
+
+	reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
 };
 
 &qpic_bam {
-	status = "ok";
+	status = "okay";
 };
 
 &qpic_nand {
-	status = "ok";
+	status = "okay";
 
 	nand@0 {
 		reg = <0>;
@@ -277,59 +280,46 @@
 };
 
 &remoteproc_mpss {
-	status = "okay";
 	memory-region = <&mpss_adsp_mem>;
+	status = "okay";
 };
 
 &tlmm {
-	pcie_ep_clkreq_default: pcie_ep_clkreq_default {
-		mux {
-			pins = "gpio56";
-			function = "pcie_clkreq";
-		};
-		config {
-			pins = "gpio56";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	pcie_ep_clkreq_default: pcie-ep-clkreq-default-state {
+		pins = "gpio56";
+		function = "pcie_clkreq";
+		drive-strength = <2>;
+		bias-disable;
 	};
 
-	pcie_ep_perst_default: pcie_ep_perst_default {
-		mux {
-			pins = "gpio57";
-			function = "gpio";
-		};
-		config {
-			pins = "gpio57";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+	pcie_ep_perst_default: pcie-ep-perst-default-state {
+		pins = "gpio57";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
-	pcie_ep_wake_default: pcie_ep_wake_default {
-		mux {
-			pins = "gpio53";
-			function = "gpio";
-		};
-		config {
-			pins = "gpio53";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	pcie_ep_wake_default: pcie-ep-wake-default-state {
+		pins = "gpio53";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
 
 &usb_hsphy {
-	status = "okay";
 	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
 	vdda33-supply = <&vreg_l10e_3p1>;
 	vdda18-supply = <&vreg_l5e_bb_1p7>;
+
+	status = "okay";
 };
 
 &usb_qmpphy {
-	status = "okay";
 	vdda-phy-supply = <&vreg_l4e_bb_0p875>;
 	vdda-pll-supply = <&vreg_l1e_bb_1p2>;
+
+	status = "okay";
 };
 
 &usb {
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index c72540223fa9..05b79281df57 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -57,12 +57,18 @@
 			enable-method = "psci";
 			clocks = <&apcs>;
 			power-domains = <&rpmhpd SDX55_CX>;
-			power-domain-names = "rpmhpd";
+			power-domain-names = "perf";
 			operating-points-v2 = <&cpu_opp_table>;
 		};
 	};
 
-	cpu_opp_table: cpu-opp-table {
+	firmware {
+		scm {
+			compatible = "qcom,scm-sdx55", "qcom,scm";
+		};
+	};
+
+	cpu_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -87,12 +93,6 @@
 		};
 	};
 
-	firmware {
-		scm {
-			compatible = "qcom,scm-sdx55", "qcom,scm";
-		};
-	};
-
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -214,7 +214,8 @@
 		};
 
 		usb_hsphy: phy@ff4000 {
-			compatible = "qcom,usb-snps-hs-7nm-phy";
+			compatible = "qcom,sdx55-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
 			reg = <0x00ff4000 0x114>;
 			status = "disabled";
 			#phy-cells = <0>;
@@ -227,31 +228,26 @@
 
 		usb_qmpphy: phy@ff6000 {
 			compatible = "qcom,sdx55-qmp-usb3-uni-phy";
-			reg = <0x00ff6000 0x1c0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00ff6000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
-
-			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
-				 <&gcc GCC_USB3_PHY_BCR>;
-			reset-names = "phy", "common";
-
-			usb_ssphy: phy@ff6200 {
-				reg = <0x00ff6200 0x170>,
-				      <0x00ff6400 0x200>,
-				      <0x00ff6800 0x800>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			status = "disabled";
 		};
 
 		mc_virt: interconnect@1100000 {
@@ -303,17 +299,171 @@
 			status = "disabled";
 		};
 
-		pcie0_phy: phy@1c07000 {
+		pcie_rc: pcie@1c00000 {
+			compatible = "qcom,pcie-sdx55";
+			reg = <0x01c00000 0x3000>,
+			      <0x40000000 0xf1d>,
+			      <0x40000f20 0xc8>,
+			      <0x40001000 0x1000>,
+			      <0x40100000 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x40300000 0x0 0x3fd00000>;
+
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "msi8";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_PIPE_CLK>,
+				 <&gcc GCC_PCIE_AUX_CLK>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLEEP_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "sleep";
+
+			assigned-clocks = <&gcc GCC_PCIE_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommu-map = <0x0   &apps_smmu 0x0200 0x1>,
+				    <0x100 &apps_smmu 0x0201 0x1>,
+				    <0x200 &apps_smmu 0x0202 0x1>,
+				    <0x300 &apps_smmu 0x0203 0x1>,
+				    <0x400 &apps_smmu 0x0204 0x1>;
+
+			resets = <&gcc GCC_PCIE_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_GDSC>;
+
+			phys = <&pcie_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie_ep: pcie-ep@1c00000 {
+			compatible = "qcom,sdx55-pcie-ep";
+			reg = <0x01c00000 0x3000>,
+			      <0x40000000 0xf1d>,
+			      <0x40000f20 0xc8>,
+			      <0x40001000 0x1000>,
+			      <0x40200000 0x100000>,
+			      <0x01c03000 0x3000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "addr_space",
+				    "mmio";
+
+			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
+
+			clocks = <&gcc GCC_PCIE_AUX_CLK>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLEEP_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "sleep",
+				      "ref";
+
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global",
+					  "doorbell";
+
+			interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>,
+					<&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_PCIE_0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_BCR>;
+			reset-names = "core";
+			power-domains = <&gcc PCIE_GDSC>;
+			phys = <&pcie_phy>;
+			phy-names = "pciephy";
+			max-link-speed = <3>;
+			num-lanes = <2>;
+			linux,pci-domain = <0>;
+
+			status = "disabled";
+		};
+
+		pcie_phy: phy@1c06000 {
 			compatible = "qcom,sdx55-qmp-pcie-phy";
-			reg = <0x01c07000 0x1c4>;
+			reg = <0x01c06000 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 			clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>,
 				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
-				 <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE_RCHNG_PHY_CLK>,
+				 <&gcc GCC_PCIE_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+
+			clock-output-names = "pcie_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_PHY_BCR>;
 			reset-names = "phy";
@@ -322,20 +472,6 @@
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie0_lane: lanes@1c06000 {
-				reg = <0x01c06000 0x104>, /* tx0 */
-				      <0x01c06200 0x328>, /* rx0 */
-				      <0x01c07200 0x1e8>, /* pcs */
-				      <0x01c06800 0x104>, /* tx1 */
-				      <0x01c06a00 0x328>, /* rx1 */
-				      <0x01c07600 0x800>; /* pcs_misc */
-				clocks = <&gcc GCC_PCIE_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#phy-cells = <0>;
-				clock-output-names = "pcie_pipe_clk";
-			};
 		};
 
 		ipa: ipa@1e40000 {
@@ -383,8 +519,8 @@
 			#hwlock-cells = <1>;
 		};
 
-		tcsr: syscon@1fcb000 {
-			compatible = "syscon";
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sdx55-tcsr", "syscon";
 			reg = <0x01fc0000 0x1000>;
 		};
 
@@ -400,45 +536,6 @@
 			status = "disabled";
 		};
 
-		pcie_ep: pcie-ep@40000000 {
-			compatible = "qcom,sdx55-pcie-ep";
-			reg = <0x01c00000 0x3000>,
-			      <0x40000000 0xf1d>,
-			      <0x40000f20 0xc8>,
-			      <0x40001000 0x1000>,
-			      <0x40200000 0x100000>,
-			      <0x01c03000 0x3000>;
-			reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
-				    "mmio";
-
-			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
-
-			clocks = <&gcc GCC_PCIE_AUX_CLK>,
-				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
-				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_PCIE_SLEEP_CLK>,
-				 <&gcc GCC_PCIE_0_CLKREF_CLK>;
-			clock-names = "aux", "cfg", "bus_master", "bus_slave",
-				      "slave_q2a", "sleep", "ref";
-
-			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "global", "doorbell";
-			reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
-			wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
-			resets = <&gcc GCC_PCIE_BCR>;
-			reset-names = "core";
-			power-domains = <&gcc PCIE_GDSC>;
-			phys = <&pcie0_lane>;
-			phy-names = "pciephy";
-			max-link-speed = <3>;
-			num-lanes = <2>;
-
-			status = "disabled";
-		};
-
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sdx55-mpss-pas";
 			reg = <0x04080000 0x4040>;
@@ -495,25 +592,31 @@
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 51 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_GDSC>;
 
 			resets = <&gcc GCC_USB30_BCR>;
 
-			usb_dwc3: dwc3@a600000 {
+			usb_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0x0a600000 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x1a0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_hsphy>, <&usb_ssphy>;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -522,7 +625,7 @@
 			compatible = "qcom,sdx55-pdc", "qcom,pdc";
 			reg = <0x0b210000 0x30000>;
 			qcom,pdc-ranges = <0 179 52>;
-			#interrupt-cells = <3>;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&intc>;
 			interrupt-controller;
 		};
@@ -548,7 +651,6 @@
 			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
-			cell-index = <0>;
 		};
 
 		tlmm: pinctrl@f100000 {
@@ -559,6 +661,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 108>;
 		};
 
 		sram@1468f000 {
@@ -577,7 +680,7 @@
 		};
 
 		apps_smmu: iommu@15000000 {
-			compatible = "qcom,sdx55-smmu-500", "arm,mmu-500";
+			compatible = "qcom,sdx55-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x15000000 0x20000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
@@ -604,6 +707,7 @@
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
 			interrupt-parent = <&intc>;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x17800000 0x1000>,
 			      <0x17802000 0x1000>;
@@ -642,63 +746,63 @@
 
 			frame@17821000 {
 				frame-number = <0>;
-				interrupts = <GIC_SPI 7 0x4>,
-					     <GIC_SPI 6 0x4>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17821000 0x1000>,
 				      <0x17822000 0x1000>;
 			};
 
 			frame@17823000 {
 				frame-number = <1>;
-				interrupts = <GIC_SPI 8 0x4>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17823000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17824000 {
 				frame-number = <2>;
-				interrupts = <GIC_SPI 9 0x4>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17824000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17825000 {
 				frame-number = <3>;
-				interrupts = <GIC_SPI 10 0x4>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17825000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17826000 {
 				frame-number = <4>;
-				interrupts = <GIC_SPI 11 0x4>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17826000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17827000 {
 				frame-number = <5>;
-				interrupts = <GIC_SPI 12 0x4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17827000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17828000 {
 				frame-number = <6>;
-				interrupts = <GIC_SPI 13 0x4>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17828000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17829000 {
 				frame-number = <7>;
-				interrupts = <GIC_SPI 14 0x4>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17829000 0x1000>;
 				status = "disabled";
 			};
 		};
 
-		apps_rsc: rsc@17840000 {
+		apps_rsc: rsc@17830000 {
 			compatible = "qcom,rpmh-rsc";
 			reg = <0x17830000 0x10000>, <0x17840000 0x10000>;
 			reg-names = "drv-0", "drv-1";
diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
index 85ea02d8362d..07c10c84eefa 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
@@ -4,11 +4,15 @@
  */
 /dts-v1/;
 
+/* PM7250B is configured to use SID2/3 */
+#define PM7250B_SID 2
+#define PM7250B_SID1 3
+
 #include "qcom-sdx65.dtsi"
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <arm64/qcom/pmk8350.dtsi>
-#include <arm64/qcom/pm8150b.dtsi>
-#include "qcom-pmx65.dtsi"
+#include <arm64/qcom/pm7250b.dtsi>
+#include "pmx65.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDX65 MTP";
@@ -65,7 +69,7 @@
 };
 
 &apps_rsc {
-	pmx65-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pmx65-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -245,6 +249,30 @@
 	status = "okay";
 };
 
+&ipa {
+	qcom,gsi-loader = "skip";
+	status = "okay";
+};
+
+&pcie_ep {
+	pinctrl-0 = <&pcie_ep_clkreq_default
+		     &pcie_ep_perst_default
+		     &pcie_ep_wake_default>;
+	pinctrl-names = "default";
+
+	reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie_phy {
+	vdda-phy-supply = <&vreg_l1b_1p2>;
+	vdda-pll-supply = <&vreg_l4b_0p88>;
+
+	status = "okay";
+};
+
 &qpic_bam {
 	status = "okay";
 };
@@ -265,8 +293,31 @@
 };
 
 &remoteproc_mpss {
-	status = "okay";
 	memory-region = <&mpss_adsp_mem>;
+	status = "okay";
+};
+
+&tlmm {
+	pcie_ep_clkreq_default: pcie-ep-clkreq-default-state {
+		pins = "gpio56";
+		function = "pcie_clkreq";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie_ep_perst_default: pcie-ep-perst-default-state {
+		pins = "gpio57";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	pcie_ep_wake_default: pcie-ep-wake-default-state {
+		pins = "gpio53";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
 
 &usb {
@@ -278,14 +329,14 @@
 };
 
 &usb_hsphy {
-	status = "okay";
 	vdda-pll-supply = <&vreg_l4b_0p88>;
 	vdda33-supply = <&vreg_l10b_3p08>;
 	vdda18-supply = <&vreg_l5b_1p8>;
+	status = "okay";
 };
 
 &usb_qmpphy {
-	status = "okay";
 	vdda-phy-supply = <&vreg_l4b_0p88>;
 	vdda-pll-supply = <&vreg_l1b_1p2>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
new file mode 100644
index 000000000000..c8e312dcd26b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
@@ -0,0 +1,822 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SDX65 SoC device tree source
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdx65.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/interconnect/qcom,sdx65.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	qcom,msm-id = <458 0x10000>, <483 0x10000>, <509 0x10000>;
+	interrupt-parent = <&intc>;
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			clock-output-names = "xo_board";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+			#clock-cells = <0>;
+		};
+
+		nand_clk_dummy: nand-clk-dummy {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			power-domains = <&rpmhpd SDX65_CX_AO>;
+			power-domain-names = "perf";
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sdx65", "qcom,scm";
+		};
+	};
+
+	mc_virt: interconnect-mc-virt {
+		compatible = "qcom,sdx65-mc-virt";
+		#interconnect-cells = <1>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-345600000 {
+			opp-hz = /bits/ 64 <345600000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			required-opps = <&rpmhpd_opp_turbo>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		tz_heap_mem: memory@8fcad000 {
+			no-map;
+			reg = <0x8fcad000 0x40000>;
+		};
+
+		secdata_mem: memory@8fcfd000 {
+			no-map;
+			reg = <0x8fcfd000 0x1000>;
+		};
+
+		hyp_mem: memory@8fd00000 {
+			no-map;
+			reg = <0x8fd00000 0x80000>;
+		};
+
+		access_control_mem: memory@8fd80000 {
+			no-map;
+			reg = <0x8fd80000 0x80000>;
+		};
+
+		aop_mem: memory@8fe00000 {
+			no-map;
+			reg = <0x8fe00000 0x20000>;
+		};
+
+		smem_mem: memory@8fe20000 {
+			compatible = "qcom,smem";
+			reg = <0x8fe20000 0xc0000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		cmd_db: reserved-memory@8fee0000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x8fee0000 0x20000>;
+			no-map;
+		};
+
+		tz_mem: memory@8ff00000 {
+			no-map;
+			reg = <0x8ff00000 0x100000>;
+		};
+
+		tz_apps_mem: memory@90000000 {
+			no-map;
+			reg = <0x90000000 0x500000>;
+		};
+
+		llcc_tcm_mem: memory@15800000 {
+			no-map;
+			reg = <0x15800000 0x800000>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdx65";
+			reg = <0x00100000 0x001f7400>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>,
+				 <&pcie_phy>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk",
+				      "pcie_pipe_clk",
+				      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
+			#power-domain-cells = <1>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		blsp1_uart3: serial@831000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x00831000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		usb_hsphy: phy@ff4000 {
+			compatible = "qcom,sdx65-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0xff4000 0x120>;
+			#phy-cells = <0>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_BCR>;
+			status = "disabled";
+		};
+
+		usb_qmpphy: phy@ff6000 {
+			compatible = "qcom,sdx65-qmp-usb3-uni-phy";
+			reg = <0x00ff6000 0x2000>;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_EN>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			status = "disabled";
+
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sdx65-system-noc";
+			reg = <0x01620000 0x31200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		qpic_bam: dma-controller@1b04000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x01b04000 0x1c000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			status = "disabled";
+		};
+
+		qpic_nand: nand-controller@1b30000 {
+			compatible = "qcom,sdx55-nand";
+			reg = <0x01b30000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>,
+				 <&nand_clk_dummy>;
+			clock-names = "core", "aon";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+			status = "disabled";
+		};
+
+		pcie_ep: pcie-ep@1c00000 {
+			compatible = "qcom,sdx65-pcie-ep", "qcom,sdx55-pcie-ep";
+			reg = <0x01c00000 0x3000>,
+			      <0x40000000 0xf1d>,
+			      <0x40000f20 0xa8>,
+			      <0x40001000 0x1000>,
+			      <0x40200000 0x100000>,
+			      <0x01c03000 0x3000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "addr_space",
+				    "mmio";
+
+			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
+
+			clocks = <&gcc GCC_PCIE_AUX_CLK>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLEEP_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_EN>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "sleep",
+				      "ref";
+
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global", "doorbell";
+
+			interconnects = <&system_noc MASTER_PCIE_0 &mc_virt SLAVE_EBI1>,
+					<&mem_noc MASTER_APPSS_PROC &system_noc SLAVE_PCIE_0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_BCR>;
+			reset-names = "core";
+
+			power-domains = <&gcc PCIE_GDSC>;
+
+			phys = <&pcie_phy>;
+			phy-names = "pciephy";
+
+			max-link-speed = <3>;
+			num-lanes = <2>;
+			linux,pci-domain = <0>;
+
+			status = "disabled";
+		};
+
+		pcie_phy: phy@1c06000 {
+			compatible = "qcom,sdx65-qmp-gen4x2-pcie-phy";
+			reg = <0x01c06000 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_RCHNG_PHY_CLK>,
+				 <&gcc GCC_PCIE_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01f40000 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1fcb000 {
+			compatible = "qcom,sdx65-tcsr", "syscon";
+			reg = <0x01fc0000 0x1000>;
+		};
+
+		ipa: ipa@3f40000 {
+			compatible = "qcom,sdx65-ipa";
+
+			reg = <0x03f40000 0x10000>,
+			      <0x03f50000 0x5000>,
+			      <0x03e04000 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			iommus = <&apps_smmu 0x5e0 0x0>,
+				 <&apps_smmu 0x5e2 0x0>;
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI1>,
+					<&mem_noc MASTER_APPSS_PROC &system_noc SLAVE_IPA_CFG>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sdx55-mpss-pas";
+			reg = <0x04080000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SDX65_CX>,
+					<&rpmhpd SDX65_MSS>;
+			power-domain-names = "cx", "mss";
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
+				label = "mpss";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs 15>;
+			};
+		};
+
+		sdhc_1: mmc@8804000 {
+			compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x08804000 0x1000>;
+			reg-names = "hc";
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>;
+			clock-names = "iface", "core";
+			status = "disabled";
+		};
+
+		mem_noc: interconnect@9680000 {
+			compatible = "qcom,sdx65-mem-noc";
+			reg = <0x09680000 0x27200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		usb: usb@a6f8800 {
+			compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
+			reg = <0x0a6f8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 19 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 18 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 76 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_GDSC>;
+
+			resets = <&gcc GCC_USB30_BCR>;
+
+			status = "disabled";
+
+			usb_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0a600000 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x1a0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		restart@c264000 {
+			compatible = "qcom,pshold";
+			reg = <0x0c264000 0x1000>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0xc440000 0xd00>,
+				<0xc600000 0x2000000>,
+				<0xe600000 0x100000>,
+				<0xe700000 0xa0000>,
+				<0xc40a000 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			qcom,channel = <0>;
+			qcom,ee = <0>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sdx65-tlmm";
+			reg = <0xf100000 0x300000>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 109>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <2>;
+		};
+
+		pdc: interrupt-controller@b210000 {
+			compatible = "qcom,sdx65-pdc", "qcom,pdc";
+			reg = <0xb210000 0x10000>;
+			qcom,pdc-ranges = <0 147 52>, <52 266 32>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		sram@1468f000 {
+			compatible = "qcom,sdx65-imem", "syscon", "simple-mfd";
+			reg = <0x1468f000 0x1000>;
+			ranges = <0x0 0x1468f000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sdx65-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x15000000 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17800000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <3>;
+			reg = <0x17800000 0x1000>,
+			      <0x17802000 0x1000>;
+		};
+
+		a7pll: clock@17808000 {
+			compatible = "qcom,sdx55-a7pll";
+			reg = <0x17808000 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			#clock-cells = <0>;
+		};
+
+		apcs: mailbox@17810000 {
+			compatible = "qcom,sdx55-apcs-gcc", "syscon";
+			reg = <0x17810000 0x2000>;
+			#mbox-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>;
+			clock-names = "ref", "pll", "aux";
+			#clock-cells = <0>;
+		};
+
+		watchdog@17817000 {
+			compatible = "qcom,apss-wdt-sdx65", "qcom,kpss-wdt";
+			reg = <0x17817000 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@17820000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x17820000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17821000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17821000 0x1000>,
+				      <0x17822000 0x1000>;
+			};
+
+			frame@17823000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17823000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17824000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17824000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17825000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17825000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17826000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17826000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17827000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17827000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17828000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17828000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17829000 {
+				frame-number = <7>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17829000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17830000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x17830000 0x10000>,
+			    <0x17840000 0x10000>;
+			reg-names = "drv-0", "drv-1";
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <1>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+				<SLEEP_TCS   2>,
+				<WAKE_TCS    2>,
+				<CONTROL_TCS 1>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sdx65-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sdx65-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <19200000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
deleted file mode 100644
index 1e8447176b10..000000000000
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the Genmai board
- *
- * Copyright (C) 2013-14 Renesas Solutions Corp.
- * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
- */
-
-/dts-v1/;
-#include "r7s72100.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
-
-/ {
-	model = "Genmai";
-	compatible = "renesas,genmai", "renesas,r7s72100";
-
-	aliases {
-		serial0 = &scif2;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@8000000 {
-		device_type = "memory";
-		reg = <0x08000000 0x08000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	leds {
-		status = "okay";
-		compatible = "gpio-leds";
-
-		led1 {
-			gpios = <&port4 10 GPIO_ACTIVE_LOW>;
-		};
-
-		led2 {
-			gpios = <&port4 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pinctrl {
-
-	scif2_pins: serial2 {
-		/* P3_0 as TxD2; P3_2 as RxD2 */
-		pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
-	};
-
-	i2c2_pins: i2c2 {
-		/* RIIC2: P1_4 as SCL, P1_5 as SDA */
-		pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
-	};
-
-	ether_pins: ether {
-		/* Ethernet on Ports 1,2,3,5 */
-		pinmux = <RZA1_PINMUX(1, 14, 4)>,/* P1_14 = ET_COL  */
-			 <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC   */
-			 <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */
-			 <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */
-			 <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER  */
-			 <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV  */
-			 <RZA1_PINMUX(2, 0, 2)>, /* P2_0 = ET_TXCLK */
-			 <RZA1_PINMUX(2, 1, 2)>, /* P2_1 = ET_TXER  */
-			 <RZA1_PINMUX(2, 2, 2)>, /* P2_2 = ET_TXEN  */
-			 <RZA1_PINMUX(2, 3, 2)>, /* P2_3 = ET_CRS   */
-			 <RZA1_PINMUX(2, 4, 2)>, /* P2_4 = ET_TXD0  */
-			 <RZA1_PINMUX(2, 5, 2)>, /* P2_5 = ET_TXD1  */
-			 <RZA1_PINMUX(2, 6, 2)>, /* P2_6 = ET_TXD2  */
-			 <RZA1_PINMUX(2, 7, 2)>, /* P2_7 = ET_TXD3  */
-			 <RZA1_PINMUX(2, 8, 2)>, /* P2_8 = ET_RXD0  */
-			 <RZA1_PINMUX(2, 9, 2)>, /* P2_9 = ET_RXD1  */
-			 <RZA1_PINMUX(2, 10, 2)>,/* P2_10 = ET_RXD2 */
-			 <RZA1_PINMUX(2, 11, 2)>;/* P2_11 = ET_RXD3 */
-	};
-};
-
-&extal_clk {
-	clock-frequency = <13330000>;
-};
-
-&usb_x1_clk {
-	clock-frequency = <48000000>;
-};
-
-&rtc_x1_clk {
-	clock-frequency = <32768>;
-};
-
-&mtu2 {
-	status = "okay";
-};
-
-&ether {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ether_pins>;
-
-	status = "okay";
-
-	renesas,no-ether-link;
-	phy-handle = <&phy0>;
-	phy0: ethernet-phy@0 {
-		compatible = "ethernet-phy-idb824.2814",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	eeprom@50 {
-		compatible = "renesas,r1ex24128", "atmel,24c128";
-		reg = <0x50>;
-		pagesize = <64>;
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&scif2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&scif2_pins>;
-
-	status = "okay";
-};
-
-&spi4 {
-	status = "okay";
-
-	codec: codec@0 {
-		compatible = "wlf,wm8978";
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
deleted file mode 100644
index 5f05f2b44a48..000000000000
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ /dev/null
@@ -1,264 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the R-Car H1 (R8A77790) Marzen board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- */
-
-/dts-v1/;
-#include "r8a7779.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "marzen";
-	compatible = "renesas,marzen", "renesas,r8a7779";
-
-	aliases {
-		serial0 = &scif2;
-		serial1 = &scif4;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
-	fixedregulator3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vccq_sdhi0: regulator-vccq-sdhi0 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	ethernet@18000000 {
-		compatible = "smsc,lan89218", "smsc,lan9115";
-		reg = <0x18000000 0x100>;
-		pinctrl-0 = <&ethernet_pins>;
-		pinctrl-names = "default";
-
-		phy-mode = "mii";
-		interrupt-parent = <&irqpin0>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		smsc,irq-push-pull;
-		reg-io-width = <4>;
-		vddvario-supply = <&fixedregulator3v3>;
-		vdd33a-supply = <&fixedregulator3v3>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led2 {
-			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-		};
-		led3 {
-			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-		};
-		led4 {
-			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	vga-encoder {
-		compatible = "adi,adv7123";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				vga_enc_in: endpoint {
-					remote-endpoint = <&du_out_rgb0>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				vga_enc_out: endpoint {
-					remote-endpoint = <&vga_in>;
-				};
-			};
-		};
-	};
-
-	vga {
-		compatible = "vga-connector";
-
-		port {
-			vga_in: endpoint {
-				remote-endpoint = <&vga_enc_out>;
-			};
-		};
-	};
-
-	lvds-encoder {
-		compatible = "thine,thc63lvdm83d";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				lvds_enc_in: endpoint {
-					remote-endpoint = <&du_out_rgb1>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				lvds_connector: endpoint {
-				};
-			};
-		};
-	};
-
-	x3_clk: x3-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <65000000>;
-	};
-};
-
-&du {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>;
-	clock-names = "du.0", "dclkin.0";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&vga_enc_in>;
-			};
-		};
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lvds_enc_in>;
-			};
-		};
-	};
-};
-
-&irqpin0 {
-	status = "okay";
-};
-
-&extal_clk {
-	clock-frequency = <31250000>;
-};
-
-&tmu0 {
-	status = "okay";
-};
-
-&pfc {
-	pinctrl-0 = <&scif_clk_pins>;
-	pinctrl-names = "default";
-
-	du_pins: du {
-		du0 {
-			groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0", "du0_clk_in";
-			function = "du0";
-		};
-		du1 {
-			groups = "du1_rgb666", "du1_sync_1", "du1_clk_out";
-			function = "du1";
-		};
-	};
-
-	scif_clk_pins: scif_clk {
-		groups = "scif_clk_b";
-		function = "scif_clk";
-	};
-
-	ethernet_pins: ethernet {
-		intc {
-			groups = "intc_irq1_b";
-			function = "intc";
-		};
-		lbsc {
-			groups = "lbsc_ex_cs0";
-			function = "lbsc";
-		};
-	};
-
-	scif2_pins: scif2 {
-		groups = "scif2_data_c";
-		function = "scif2";
-	};
-
-	scif4_pins: scif4 {
-		groups = "scif4_data";
-		function = "scif4";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
-		function = "sdhi0";
-	};
-
-	hspi0_pins: hspi0 {
-		groups = "hspi0";
-		function = "hspi0";
-	};
-};
-
-&sata {
-	status = "okay";
-};
-
-&scif2 {
-	pinctrl-0 = <&scif2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif4 {
-	pinctrl-0 = <&scif4_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif_clk {
-	clock-frequency = <14745600>;
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&hspi0 {
-	pinctrl-0 = <&hspi0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
deleted file mode 100644
index 4bf813335e21..000000000000
--- a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for the RZN1D-DB Board
- *
- * Copyright (C) 2018 Renesas Electronics Europe Limited
- *
- */
-
-/dts-v1/;
-
-#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
-#include <dt-bindings/net/pcs-rzn1-miic.h>
-
-#include "r9a06g032.dtsi"
-
-/ {
-	model = "RZN1D-DB Board";
-	compatible = "renesas,rzn1d400-db", "renesas,r9a06g032";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart0;
-	};
-};
-
-&eth_miic {
-	status = "okay";
-	renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
-};
-
-&gmac2 {
-	status = "okay";
-	phy-mode = "gmii";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&mii_conv4 {
-	renesas,miic-input = <MIIC_SWITCH_PORTB>;
-	status = "okay";
-};
-
-&mii_conv5 {
-	renesas,miic-input = <MIIC_SWITCH_PORTA>;
-	status = "okay";
-};
-
-&pinctrl{
-	pins_eth3: pins_eth3 {
-		pinmux = <RZN1_PINMUX(36, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(37, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(38, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(39, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(40, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(41, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(42, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(43, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(44, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(45, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(46, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(47, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
-		drive-strength = <6>;
-		bias-disable;
-	};
-
-	pins_eth4: pins_eth4 {
-		pinmux = <RZN1_PINMUX(48, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(49, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(50, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(51, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(52, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(53, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(54, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(55, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(56, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(57, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(58, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
-			 <RZN1_PINMUX(59, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
-		drive-strength = <6>;
-		bias-disable;
-	};
-
-	pins_mdio1: pins_mdio1 {
-		pinmux = <RZN1_PINMUX(152, RZN1_FUNC_MDIO1_SWITCH)>,
-			 <RZN1_PINMUX(153, RZN1_FUNC_MDIO1_SWITCH)>;
-	};
-};
-
-&rtc0 {
-	status = "okay";
-};
-
-&switch {
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pins_eth3>, <&pins_eth4>, <&pins_mdio1>;
-
-	dsa,member = <0 0>;
-
-	mdio {
-		clock-frequency = <2500000>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch0phy4: ethernet-phy@4 {
-			reg = <4>;
-			micrel,led-mode = <1>;
-		};
-
-		switch0phy5: ethernet-phy@5 {
-			reg = <5>;
-			micrel,led-mode = <1>;
-		};
-	};
-};
-
-&switch_port0 {
-	label = "lan0";
-	phy-mode = "mii";
-	phy-handle = <&switch0phy5>;
-	status = "okay";
-};
-
-&switch_port1 {
-	label = "lan1";
-	phy-mode = "mii";
-	phy-handle = <&switch0phy4>;
-	status = "okay";
-};
-
-&switch_port4 {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&wdt0 {
-	timeout-sec = <60>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/realtek/Makefile b/arch/arm/boot/dts/realtek/Makefile
new file mode 100644
index 000000000000..c83671b5560f
--- /dev/null
+++ b/arch/arm/boot/dts/realtek/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_REALTEK) += \
+	rtd1195-horseradish.dtb \
+	rtd1195-mele-x1000.dtb
diff --git a/arch/arm/boot/dts/rtd1195-horseradish.dts b/arch/arm/boot/dts/realtek/rtd1195-horseradish.dts
index 9d06d3d34c74..9d06d3d34c74 100644
--- a/arch/arm/boot/dts/rtd1195-horseradish.dts
+++ b/arch/arm/boot/dts/realtek/rtd1195-horseradish.dts
diff --git a/arch/arm/boot/dts/rtd1195-mele-x1000.dts b/arch/arm/boot/dts/realtek/rtd1195-mele-x1000.dts
index c7951b9a2c97..c7951b9a2c97 100644
--- a/arch/arm/boot/dts/rtd1195-mele-x1000.dts
+++ b/arch/arm/boot/dts/realtek/rtd1195-mele-x1000.dts
diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/realtek/rtd1195.dtsi
index 21897210d9d0..21897210d9d0 100644
--- a/arch/arm/boot/dts/rtd1195.dtsi
+++ b/arch/arm/boot/dts/realtek/rtd1195.dtsi
diff --git a/arch/arm/boot/dts/renesas/Makefile b/arch/arm/boot/dts/renesas/Makefile
new file mode 100644
index 000000000000..947c7fe02803
--- /dev/null
+++ b/arch/arm/boot/dts/renesas/Makefile
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_RENESAS) += \
+	emev2-kzm9d.dtb \
+	r7s72100-genmai.dtb \
+	r7s72100-gr-peach.dtb \
+	r7s72100-rskrza1.dtb \
+	r7s9210-rza2mevb.dtb \
+	r8a73a4-ape6evm.dtb \
+	r8a7740-armadillo800eva.dtb \
+	r8a7742-iwg21d-q7.dtb \
+	r8a7742-iwg21d-q7-dbcm-ca.dtb \
+	r8a7743-iwg20d-q7.dtb \
+	r8a7743-iwg20d-q7-dbcm-ca.dtb \
+	r8a7743-sk-rzg1m.dtb \
+	r8a7744-iwg20d-q7.dtb \
+	r8a7744-iwg20d-q7-dbcm-ca.dtb \
+	r8a7745-iwg22d-sodimm.dtb \
+	r8a7745-iwg22d-sodimm-dbhd-ca.dtb \
+	r8a7745-sk-rzg1e.dtb \
+	r8a77470-iwg23s-sbc.dtb \
+	r8a7778-bockw.dtb \
+	r8a7779-marzen.dtb \
+	r8a7790-lager.dtb \
+	r8a7790-stout.dtb \
+	r8a7791-koelsch.dtb \
+	r8a7791-porter.dtb \
+	r8a7792-blanche.dtb \
+	r8a7792-wheat.dtb \
+	r8a7793-gose.dtb \
+	r8a7794-alt.dtb \
+	r8a7794-silk.dtb \
+	r9a06g032-rzn1d400-db.dtb \
+	r9a06g032-rzn1d400-eb.dtb \
+	sh73a0-kzm9g.dtb
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/renesas/emev2-kzm9d.dts
index 89495dd37358..9b64f98310f3 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/renesas/emev2-kzm9d.dts
@@ -31,28 +31,28 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		one {
+		key-1 {
 			debounce-interval = <50>;
 			wakeup-source;
 			label = "DSW2-1";
 			linux,code = <KEY_1>;
 			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 		};
-		two {
+		key-2 {
 			debounce-interval = <50>;
 			wakeup-source;
 			label = "DSW2-2";
 			linux,code = <KEY_2>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		three {
+		key-3 {
 			debounce-interval = <50>;
 			wakeup-source;
 			label = "DSW2-3";
 			linux,code = <KEY_3>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 		};
-		four {
+		key-4 {
 			debounce-interval = <50>;
 			wakeup-source;
 			label = "DSW2-4";
@@ -83,8 +83,7 @@
 		compatible = "smsc,lan9221", "smsc,lan9115";
 		reg = <0x20000000 0x10000>;
 		phy-mode = "mii";
-		interrupt-parent = <&gpio0>;
-		interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+		interrupts-extended = <&gpio0 1 IRQ_TYPE_EDGE_RISING>;
 		reg-io-width = <4>;
 		smsc,irq-active-high;
 		smsc,irq-push-pull;
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/renesas/emev2.dtsi
index ecfaa0b7523e..ecfaa0b7523e 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/renesas/emev2.dtsi
diff --git a/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi b/arch/arm/boot/dts/renesas/gr-peach-audiocamerashield.dtsi
index 8d77579807ec..8d77579807ec 100644
--- a/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi
+++ b/arch/arm/boot/dts/renesas/gr-peach-audiocamerashield.dtsi
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/renesas/iwg20d-q7-common.dtsi
index 03caea6fc6ff..2cc2908b48ca 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/renesas/iwg20d-q7-common.dtsi
@@ -49,7 +49,7 @@
 	lcd_backlight: backlight {
 		compatible = "pwm-backlight";
 
-		pwms = <&pwm3 0 5000000 0>;
+		pwms = <&pwm3 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
@@ -219,8 +219,7 @@
 	touch: touchpanel@38 {
 		compatible = "edt,edt-ft5406";
 		reg = <0x38>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&gpio2 12 IRQ_TYPE_EDGE_FALLING>;
 		vcc-supply = <&vcc_3v3_tft1>;
 	};
 };
diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi
index e10f99278c77..ca58ea93f58f 100644
--- a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
+++ b/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi
@@ -27,6 +27,15 @@
 			};
 		};
 	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &can1 {
@@ -64,11 +73,16 @@
 	hdmi@39 {
 		compatible = "adi,adv7511w";
 		reg = <0x39>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio0 13 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&cec_clock>;
 		clock-names = "cec";
 
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		dvdd-3v-supply = <&reg_3p3v>;
+		bgvdd-supply = <&reg_1p8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
new file mode 100644
index 000000000000..3c3756509714
--- /dev/null
+++ b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Genmai board
+ *
+ * Copyright (C) 2013-14 Renesas Solutions Corp.
+ * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ */
+
+/dts-v1/;
+#include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
+
+/ {
+	model = "Genmai";
+	compatible = "renesas,genmai", "renesas,r7s72100";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	flash@18000000 {
+		compatible = "mtd-rom";
+		reg = <0x18000000 0x08000000>;
+		bank-width = <4>;
+		device-width = <1>;
+
+		clocks = <&mstp9_clks R7S72100_CLK_SPIBSC0>;
+		power-domains = <&cpg_clocks>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "user";
+				reg = <0x00000000 0x04000000>;
+			};
+
+			partition@4000000 {
+				label = "user1";
+				reg = <0x04000000 0x04000000>;
+			};
+		};
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&keyboard_pins>;
+
+		key-1 {
+			/* JP3 must be set to 1-2 (default) */
+			interrupts-extended = <&irqc 6 IRQ_TYPE_EDGE_BOTH>;
+			linux,code = <KEY_1>;
+			label = "SW6,SW7";
+			wakeup-source;
+		};
+	};
+
+	leds {
+		/* Needs SDHI0 to be disabled */
+		status = "disabled";
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&port4 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			gpios = <&port4 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@8000000 {
+		device_type = "memory";
+		reg = <0x08000000 0x08000000>;
+	};
+
+	cvcc2: regulator-mmc {
+		compatible = "regulator-fixed";
+		regulator-name = "Cvcc2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&bsc {
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0x00000000 0x04000000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000000 0x00040000>;
+			};
+
+			partition@40000 {
+				label = "uboot-env";
+				reg = <0x00040000 0x00020000>;
+			};
+
+			partition@60000 {
+				label = "flash";
+				reg = <0x00060000 0x03fa0000>;
+			};
+		};
+	};
+
+	flash@4000000 {
+		compatible = "cfi-flash";
+		reg = <0x04000000 0x04000000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot1";
+				reg = <0x00000000 0x00040000>;
+			};
+
+			partition@40000 {
+				label = "uboot-env1";
+				reg = <0x00040000 0x00020000>;
+			};
+
+			partition@60000 {
+				label = "flash1";
+				reg = <0x00060000 0x03fa0000>;
+			};
+		};
+	};
+};
+
+&ether {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ether_pins>;
+
+	status = "okay";
+
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-idb824.2814",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <13330000>;
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	eeprom@50 {
+		compatible = "renesas,r1ex24128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&mmcif {
+	pinctrl-0 = <&mmcif_pins>;
+	pinctrl-names = "default";
+	cd-gpios = <&port3 8 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&cvcc2>;
+	vqmmc-supply = <&cvcc2>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&mtu2 {
+	status = "okay";
+};
+
+&ostm0 {
+	bootph-all;
+	status = "okay";
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&pinctrl {
+	ether_pins: ether {
+		/* Ethernet on Ports 1,2,3,5 */
+		pinmux = <RZA1_PINMUX(1, 14, 4)>,/* P1_14 = ET_COL  */
+			 <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC   */
+			 <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */
+			 <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */
+			 <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER  */
+			 <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV  */
+			 <RZA1_PINMUX(2, 0, 2)>, /* P2_0 = ET_TXCLK */
+			 <RZA1_PINMUX(2, 1, 2)>, /* P2_1 = ET_TXER  */
+			 <RZA1_PINMUX(2, 2, 2)>, /* P2_2 = ET_TXEN  */
+			 <RZA1_PINMUX(2, 3, 2)>, /* P2_3 = ET_CRS   */
+			 <RZA1_PINMUX(2, 4, 2)>, /* P2_4 = ET_TXD0  */
+			 <RZA1_PINMUX(2, 5, 2)>, /* P2_5 = ET_TXD1  */
+			 <RZA1_PINMUX(2, 6, 2)>, /* P2_6 = ET_TXD2  */
+			 <RZA1_PINMUX(2, 7, 2)>, /* P2_7 = ET_TXD3  */
+			 <RZA1_PINMUX(2, 8, 2)>, /* P2_8 = ET_RXD0  */
+			 <RZA1_PINMUX(2, 9, 2)>, /* P2_9 = ET_RXD1  */
+			 <RZA1_PINMUX(2, 10, 2)>,/* P2_10 = ET_RXD2 */
+			 <RZA1_PINMUX(2, 11, 2)>;/* P2_11 = ET_RXD3 */
+	};
+
+	i2c2_pins: i2c2 {
+		/* RIIC2: P1_4 as SCL, P1_5 as SDA */
+		pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
+	};
+
+	keyboard_pins: keyboard {
+		/* P3_1 as IRQ6 */
+		pinmux = <RZA1_PINMUX(3, 1, 3)>;
+	};
+
+	mmcif_pins: mmcif {
+		/* MMCIF: P3_8 is CD_GPIO, P3_10 up to P3_15, P4_0 up to P4_3 */
+		pinmux = <RZA1_PINMUX(3, 10, 8)>,	/* MMC_D1 */
+			 <RZA1_PINMUX(3, 11, 8)>,	/* MMC_D0 */
+			 <RZA1_PINMUX(3, 12, 8)>,	/* MMC_CLK */
+			 <RZA1_PINMUX(3, 13, 8)>,	/* MMC_CMD */
+			 <RZA1_PINMUX(3, 14, 8)>,	/* MMC_D3 */
+			 <RZA1_PINMUX(3, 15, 8)>,	/* MMC_D2 */
+			 <RZA1_PINMUX(4, 0, 8)>,	/* MMC_D4 */
+			 <RZA1_PINMUX(4, 1, 8)>,	/* MMC_D5 */
+			 <RZA1_PINMUX(4, 2, 8)>,	/* MMC_D6 */
+			 <RZA1_PINMUX(4, 3, 8)>;	/* MMC_D7 */
+	};
+
+	scif2_pins: serial2 {
+		bootph-all;
+		/* P3_0 as TxD2; P3_2 as RxD2 */
+		pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
+	};
+
+	sdhi0_pins: sdhi0 {
+		/* SDHI0: P4_8 up to P4_15 */
+		pinmux = <RZA1_PINMUX(4, 8, 3)>,	/* SD_CD_0 */
+			 <RZA1_PINMUX(4, 9, 3)>,	/* SD_WP_0 */
+			 <RZA1_PINMUX(4, 10, 3)>,	/* SD_D1_0 */
+			 <RZA1_PINMUX(4, 11, 3)>,	/* SD_D0_0 */
+			 <RZA1_PINMUX(4, 12, 3)>,	/* SD_CLK_0 */
+			 <RZA1_PINMUX(4, 13, 3)>,	/* SD_CMD_0 */
+			 <RZA1_PINMUX(4, 14, 3)>,	/* SD_D3_0 */
+			 <RZA1_PINMUX(4, 15, 3)>;	/* SD_D2_0 */
+	};
+};
+
+&rtc_x1_clk {
+	clock-frequency = <32768>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scif2_pins>;
+	bootph-all;
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi0_pins>;
+
+	bus-width = <4>;
+	status = "okay";
+};
+
+&spi4 {
+	status = "okay";
+
+	codec: codec@0 {
+		compatible = "wlf,wm8978";
+		reg = <0>;
+		spi-max-frequency = <500000>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&usb_x1_clk {
+	clock-frequency = <48000000>;
+};
+
+&wdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts
index 105f9c71f9fd..23ddec217685 100644
--- a/arch/arm/boot/dts/r7s72100-gr-peach.dts
+++ b/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts
@@ -29,14 +29,8 @@
 		reg = <0x20000000 0x00a00000>;
 	};
 
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
 	flash@18000000 {
 		compatible = "mtd-rom";
-		probe-type = "map_rom";
 		reg = <0x18000000 0x00800000>;
 		bank-width = <4>;
 		device-width = <1>;
@@ -65,6 +59,7 @@
 
 &pinctrl {
 	scif2_pins: serial2 {
+		bootph-all;
 		/* P6_2 as RxD2; P6_3 as TxD2 */
 		pinmux = <RZA1_PINMUX(6, 2, 7)>, <RZA1_PINMUX(6, 3, 7)>;
 	};
@@ -105,6 +100,7 @@
 };
 
 &ostm0 {
+	bootph-all;
 	status = "okay";
 };
 
@@ -115,7 +111,7 @@
 &scif2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&scif2_pins>;
-
+	bootph-all;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts
index 1c5acf694407..91178fb9e721 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts
@@ -29,6 +29,48 @@
 		reg = <0x08000000 0x02000000>;
 	};
 
+	flash@18000000 {
+		compatible = "mtd-rom";
+		reg = <0x18000000 0x08000000>;
+		clocks = <&mstp9_clks R7S72100_CLK_SPIBSC0>;
+		power-domains = <&cpg_clocks>;
+		bank-width = <4>;
+		device-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000000 0x00080000>;
+			};
+
+			partition@80000 {
+				label = "uboot-env";
+				reg = <0x00080000 0x00040000>;
+			};
+
+			partition@c0000 {
+				label = "dt";
+				reg = <0x000c0000 0x00040000>;
+			};
+
+			partition@100000 {
+				label = "kernel";
+				reg = <0x00100000 0x00280000>;
+			};
+
+			partition@400000 {
+				label = "rootfs";
+				reg = <0x00400000 0x01c00000>;
+			};
+		};
+	};
+
 	keyboard {
 		compatible = "gpio-keys";
 
@@ -36,35 +78,27 @@
 		pinctrl-0 = <&keyboard_pins>;
 
 		key-1 {
-			interrupt-parent = <&irqc>;
-			interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+			interrupts-extended = <&irqc 3 IRQ_TYPE_EDGE_BOTH>;
 			linux,code = <KEY_1>;
 			label = "SW1";
 			wakeup-source;
 		};
 
 		key-2 {
-			interrupt-parent = <&irqc>;
-			interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
+			interrupts-extended = <&irqc 2 IRQ_TYPE_EDGE_BOTH>;
 			linux,code = <KEY_2>;
 			label = "SW2";
 			wakeup-source;
 		};
 
 		key-3 {
-			interrupt-parent = <&irqc>;
-			interrupts = <5 IRQ_TYPE_EDGE_BOTH>;
+			interrupts-extended = <&irqc 5 IRQ_TYPE_EDGE_BOTH>;
 			linux,code = <KEY_3>;
 			label = "SW3";
 			wakeup-source;
 		};
 	};
 
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
 	leds {
 		compatible = "gpio-leds";
 
@@ -118,6 +152,30 @@
 	};
 };
 
+&bsc {
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0x00000000 0x4000000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "apps";
+				reg = <0x00000000 0x01000000>;
+			};
+
+			partition@1000000 {
+				label = "data";
+				reg = <0x01000000 0x03000000>;
+			};
+		};
+	};
+};
+
 &usb_x1_clk {
 	clock-frequency = <48000000>;
 };
@@ -141,6 +199,7 @@
 
 	/* Serial Console */
 	scif2_pins: serial2 {
+		bootph-all;
 		pinmux = <RZA1_PINMUX(3, 0, 6)>,	/* TxD2 */
 			 <RZA1_PINMUX(3, 2, 4)>;	/* RxD2 */
 	};
@@ -206,6 +265,7 @@
 };
 
 &ostm0 {
+	bootph-all;
 	status = "okay";
 };
 
@@ -220,5 +280,11 @@
 &scif2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&scif2_pins>;
+	bootph-all;
+	status = "okay";
+};
+
+&wdt {
+	timeout-sec = <60>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/renesas/r7s72100.dtsi
index b07b71307f24..a1e4e9ac8f62 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/renesas/r7s72100.dtsi
@@ -36,6 +36,14 @@
 		clock-div = <3>;
 	};
 
+	bsc: bus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x18000000>;
+		bootph-all;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -100,6 +108,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
+		bootph-all;
 
 		L2: cache-controller@3ffff000 {
 			compatible = "arm,pl310-cache";
@@ -118,6 +127,7 @@
 				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "bri";
 			clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
 			clock-names = "fck";
 			power-domains = <&cpg_clocks>;
@@ -131,6 +141,7 @@
 				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "bri";
 			clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
 			clock-names = "fck";
 			power-domains = <&cpg_clocks>;
@@ -144,6 +155,7 @@
 				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "bri";
 			clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
 			clock-names = "fck";
 			power-domains = <&cpg_clocks>;
@@ -157,6 +169,7 @@
 				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "bri";
 			clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
 			clock-names = "fck";
 			power-domains = <&cpg_clocks>;
@@ -170,6 +183,7 @@
 				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "bri";
 			clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
 			clock-names = "fck";
 			power-domains = <&cpg_clocks>;
@@ -183,6 +197,7 @@
 				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "bri";
 			clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
 			clock-names = "fck";
 			power-domains = <&cpg_clocks>;
@@ -196,6 +211,7 @@
 				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "bri";
 			clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
 			clock-names = "fck";
 			power-domains = <&cpg_clocks>;
@@ -209,6 +225,7 @@
 				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "bri";
 			clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
 			clock-names = "fck";
 			power-domains = <&cpg_clocks>;
@@ -223,6 +240,8 @@
 				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
+			dmas = <&dmac 0x2d21>, <&dmac 0x2d22>;
+			dma-names = "tx", "rx";
 			power-domains = <&cpg_clocks>;
 			num-cs = <1>;
 			#address-cells = <1>;
@@ -238,6 +257,8 @@
 				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
+			dmas = <&dmac 0x2d25>, <&dmac 0x2d26>;
+			dma-names = "tx", "rx";
 			power-domains = <&cpg_clocks>;
 			num-cs = <1>;
 			#address-cells = <1>;
@@ -253,6 +274,8 @@
 				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
+			dmas = <&dmac 0x2d29>, <&dmac 0x2d2a>;
+			dma-names = "tx", "rx";
 			power-domains = <&cpg_clocks>;
 			num-cs = <1>;
 			#address-cells = <1>;
@@ -268,6 +291,8 @@
 				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
+			dmas = <&dmac 0x2d2d>, <&dmac 0x2d2e>;
+			dma-names = "tx", "rx";
 			power-domains = <&cpg_clocks>;
 			num-cs = <1>;
 			#address-cells = <1>;
@@ -283,6 +308,8 @@
 				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
+			dmas = <&dmac 0x2d31>, <&dmac 0x2d32>;
+			dma-names = "tx", "rx";
 			power-domains = <&cpg_clocks>;
 			num-cs = <1>;
 			#address-cells = <1>;
@@ -317,9 +344,9 @@
 				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&mstp8_clks R7S72100_CLK_MMCIF>;
+			dmas = <&dmac 0x2cc9>, <&dmac 0x2cca>;
+			dma-names = "tx", "rx";
 			power-domains = <&cpg_clocks>;
-			reg-io-width = <4>;
-			bus-width = <8>;
 			status = "disabled";
 		};
 
@@ -355,6 +382,37 @@
 			status = "disabled";
 		};
 
+		dmac: dma-controller@e8200000 {
+			compatible = "renesas,r7s72100-dmac",
+				     "renesas,rz-dmac";
+			reg = <0xe8200000 0x1000>,
+			      <0xfcfe1000 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 9 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 12 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 13 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 14 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 16 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 17 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 18 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 24 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
 		gic: interrupt-controller@e8201000 {
 			compatible = "arm,pl390";
 			#interrupt-cells = <3>;
@@ -501,6 +559,7 @@
 
 		pinctrl: pinctrl@fcfe3000 {
 			compatible = "renesas,r7s72100-ports";
+			bootph-all;
 
 			reg = <0xfcfe3000 0x4230>;
 
diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/renesas/r7s9210-rza2mevb.dts
index 69a5a44b8a2f..f69a7fe56b6e 100644
--- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts
+++ b/arch/arm/boot/dts/renesas/r7s9210-rza2mevb.dts
@@ -55,19 +55,13 @@
 		pinctrl-0 = <&keyboard_pins>;
 
 		key-3 {
-			interrupt-parent = <&irqc>;
-			interrupts = <0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts-extended = <&irqc 0 IRQ_TYPE_EDGE_BOTH>;
 			linux,code = <KEY_3>;
 			label = "SW3";
 			wakeup-source;
 		};
 	};
 
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
 	leds {
 		compatible = "gpio-leds";
 
diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/renesas/r7s9210.dtsi
index fdeb0bc12cb7..fdeb0bc12cb7 100644
--- a/arch/arm/boot/dts/r7s9210.dtsi
+++ b/arch/arm/boot/dts/renesas/r7s9210.dtsi
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts
index e81a7213d304..58becc9fbffd 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts
@@ -164,7 +164,7 @@
 
 &bsc {
 	flash@0 {
-		compatible = "cfi-flash", "mtd-rom";
+		compatible = "cfi-flash";
 		reg = <0x0 0x08000000>;
 		bank-width = <2>;
 
@@ -193,8 +193,7 @@
 	ethernet@8000000 {
 		compatible = "smsc,lan9220", "smsc,lan9115";
 		reg = <0x08000000 0x1000>;
-		interrupt-parent = <&irqc1>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&irqc1 8 IRQ_TYPE_LEVEL_HIGH>;
 		phy-mode = "mii";
 		reg-io-width = <4>;
 		smsc,irq-active-high;
@@ -209,6 +208,18 @@
 	status = "okay";
 };
 
+&extal1_clk {
+	clock-frequency = <26000000>;
+};
+
+&extal2_clk {
+	clock-frequency = <48000000>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
 &pfc {
 	scifa0_pins: scifa0 {
 		groups = "scifa0_data";
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/renesas/r8a73a4.dtsi
index c39066967053..2e19ebf9e2ba 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a73a4.dtsi
@@ -58,6 +58,33 @@
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
+	};
+
+	tmu0: timer@e61e0000 {
+		compatible = "renesas,tmu-r8a73a4", "renesas,tmu";
+		reg = <0 0xe61e0000 0 0x30>;
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2";
+		clocks = <&mstp1_clks R8A73A4_CLK_TMU0>;
+		clock-names = "fck";
+		power-domains = <&pd_c5>;
+		status = "disabled";
+	};
+
+	tmu3: timer@fff80000 {
+		compatible = "renesas,tmu-r8a73a4", "renesas,tmu";
+		reg = <0 0xfff80000 0 0x30>;
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2";
+		clocks = <&mstp1_clks R8A73A4_CLK_TMU3>;
+		clock-names = "fck";
+		power-domains = <&pd_a3r>;
+		status = "disabled";
 	};
 
 	dbsc1: memory-controller@e6790000 {
@@ -401,7 +428,6 @@
 		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>;
 		power-domains = <&pd_a3sp>;
-		reg-io-width = <4>;
 		status = "disabled";
 	};
 
@@ -411,7 +437,6 @@
 		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>;
 		power-domains = <&pd_a3sp>;
-		reg-io-width = <4>;
 		status = "disabled";
 	};
 
@@ -450,17 +475,20 @@
 		extalr_clk: extalr {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal1_clk: extal1 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <25000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal2_clk: extal2 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <48000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		fsiack_clk: fsiack {
 			compatible = "fixed-clock";
@@ -621,6 +649,13 @@
 			clock-div = <2>;
 			clock-mult = <1>;
 		};
+		cp_clk: cp {
+			compatible = "fixed-factor-clock";
+			clocks = <&main_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
 		pll0_div2_clk: pll0_div2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A73A4_CLK_PLL0>;
@@ -644,6 +679,17 @@
 		};
 
 		/* Gate clocks */
+		mstp1_clks: mstp1_clks@e6150134 {
+			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+			clocks = <&cp_clk>, <&mp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A73A4_CLK_TMU0 R8A73A4_CLK_TMU3
+			>;
+			clock-output-names =
+				"tmu0", "tmu3";
+		};
 		mstp2_clks: mstp2_clks@e6150138 {
 			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
@@ -686,9 +732,8 @@
 		mstp4_clks: mstp4_clks@e6150140 {
 			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
-			clocks = <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_ZS>,
-				 <&main_div2_clk>,
-				 <&cpg_clocks R8A73A4_CLK_HP>,
+			clocks = <&cp_clk>, <&cpg_clocks R8A73A4_CLK_ZS>,
+				 <&cp_clk>, <&cpg_clocks R8A73A4_CLK_HP>,
 				 <&cpg_clocks R8A73A4_CLK_HP>;
 			#clock-cells = <1>;
 			clock-indices = <
@@ -702,7 +747,7 @@
 		mstp5_clks: mstp5_clks@e6150144 {
 			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
-			clocks = <&extal2_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
+			clocks = <&cp_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A73A4_CLK_THERMAL R8A73A4_CLK_IIC8
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts
index 0af63ddc4473..04d24b6d8056 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts
@@ -58,7 +58,7 @@
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_sdhi0>;
 
-		enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&pfc 74 GPIO_ACTIVE_HIGH>;
 		gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
 		states = <3300000 0>, <1800000 1>;
 
@@ -132,7 +132,7 @@
 		i2c-gpio,delay-us = <5>;
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
@@ -143,6 +143,18 @@
 		enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
 	};
 
+	panel {
+		compatible = "ampire,am-800480l1tmqw-t00h";
+		backlight = <&backlight>;
+		power-supply = <&reg_5p0v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdc0_rgb>;
+			};
+		};
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 
@@ -196,21 +208,27 @@
 
 &i2c0 {
 	status = "okay";
+
+	wm8978: codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8978";
+		reg = <0x1a>;
+	};
+
+	eeprom@50 {
+		compatible = "st,24c01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
 	touchscreen@55 {
 		compatible = "sitronix,st1232";
 		reg = <0x55>;
-		interrupt-parent = <&irqpin1>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqpin1 2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&st1232_pins>;
 		pinctrl-names = "default";
 		gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
 	};
-
-	wm8978: codec@1a {
-		#sound-dai-cells = <0>;
-		compatible = "wlf,wm8978";
-		reg = <0x1a>;
-	};
 };
 
 &i2c2 {
@@ -221,10 +239,22 @@
 	};
 };
 
-&pfc {
+&lcdc0 {
 	pinctrl-0 = <&lcd0_pins>;
 	pinctrl-names = "default";
 
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pfc {
 	ether_pins: ether {
 		groups = "gether_mii", "gether_int";
 		function = "gether";
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/renesas/r8a7740.dtsi
index 1b2cf5fa322b..d13ab86c3ab4 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7740.dtsi
@@ -398,12 +398,68 @@
 		status = "disabled";
 	};
 
+	lcdc0: lcd-controller@fe940000 {
+		compatible = "renesas,r8a7740-lcdc";
+		reg = <0xfe940000 0x4000>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_LCDC0>,
+			 <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk0_clk>,
+			 <&vou_clk>;
+		clock-names = "fck", "media", "lclk", "video";
+		power-domains = <&pd_a4lc>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lcdc0_rgb: endpoint {
+				};
+			};
+		};
+	};
+
+	lcdc1: lcd-controller@fe944000 {
+		compatible = "renesas,r8a7740-lcdc";
+		reg = <0xfe944000 0x4000>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_LCDC1>,
+			 <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk1_clk>,
+			 <&vou_clk>;
+		clock-names = "fck", "media", "lclk", "video";
+		power-domains = <&pd_a4lc>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lcdc1_rgb: endpoint {
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lcdc1_hdmi: endpoint {
+				};
+			};
+		};
+	};
+
 	tmu0: timer@fff80000 {
 		compatible = "renesas,tmu-r8a7740", "renesas,tmu";
 		reg = <0xfff80000 0x2c>;
 		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2";
 		clocks = <&mstp1_clks R8A7740_CLK_TMU0>;
 		clock-names = "fck";
 		power-domains = <&pd_a4r>;
@@ -419,6 +475,7 @@
 		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2";
 		clocks = <&mstp1_clks R8A7740_CLK_TMU1>;
 		clock-names = "fck";
 		power-domains = <&pd_a4r>;
@@ -474,6 +531,16 @@
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
+		lcdlclk0_clk: lcdlclk0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		lcdlclk1_clk: lcdlclk1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
 
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7-dbcm-ca.dts
index 4e58c54cde17..33ac4bd1e63b 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -7,6 +7,9 @@
  */
 
 /dts-v1/;
+
+#include <dt-bindings/media/video-interfaces.h>
+
 #include "r8a7742-iwg21d-q7.dts"
 
 / {
@@ -242,7 +245,7 @@
 		vin0ep: endpoint {
 			remote-endpoint = <&cam0ep>;
 			bus-width = <8>;
-			bus-type = <6>;
+			bus-type = <MEDIA_BUS_TYPE_BT656>;
 		};
 	};
 };
@@ -273,7 +276,7 @@
 		vin1ep: endpoint {
 			remote-endpoint = <&cam1ep>;
 			bus-width = <8>;
-			bus-type = <6>;
+			bus-type = <MEDIA_BUS_TYPE_BT656>;
 		};
 	};
 };
@@ -305,7 +308,7 @@
 			remote-endpoint = <&cam2ep>;
 			bus-width = <8>;
 			data-shift = <8>;
-			bus-type = <6>;
+			bus-type = <MEDIA_BUS_TYPE_BT656>;
 		};
 	};
 };
@@ -335,7 +338,7 @@
 		vin3ep: endpoint {
 			remote-endpoint = <&cam3ep>;
 			bus-width = <8>;
-			bus-type = <6>;
+			bus-type = <MEDIA_BUS_TYPE_BT656>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
index 40cef0b1d1e6..c73160df619d 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
@@ -7,6 +7,8 @@
  * Copyright (C) 2020 Renesas Electronics Corp.
  */
 
+#include <dt-bindings/media/video-interfaces.h>
+
 #define CAM_ENABLED	1
 
 &CAM_PARENT_I2C {
@@ -26,7 +28,7 @@
 			CAM_EP: endpoint {
 				bus-width = <8>;
 				data-shift = <2>;
-				bus-type = <6>;
+				bus-type = <MEDIA_BUS_TYPE_BT656>;
 				pclk-sample = <1>;
 				remote-endpoint = <&VIN_EP>;
 			};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi b/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
index f5e77f024251..a7f5cfec64b8 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
@@ -7,6 +7,8 @@
  * Copyright (C) 2020 Renesas Electronics Corp.
  */
 
+#include <dt-bindings/media/video-interfaces.h>
+
 #define CAM_ENABLED	1
 
 &CAM_PARENT_I2C {
@@ -21,7 +23,7 @@
 		port {
 			CAM_EP: endpoint {
 				bus-width = <8>;
-				bus-type = <6>;
+				bus-type = <MEDIA_BUS_TYPE_BT656>;
 				remote-endpoint = <&VIN_EP>;
 			};
 		};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7.dts
index 64102b664055..6a8a0d2113b0 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/renesas/r8a7742-iwg21d-q7.dts
@@ -202,8 +202,7 @@
 	touch: touchpanel@38 {
 		compatible = "edt,edt-ft5406";
 		reg = <0x38>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&gpio0 24 IRQ_TYPE_EDGE_FALLING>;
 		/* GP1_29 is also shared with audio codec reset pin */
 		reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&vcc_3v3_tft1>;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi b/arch/arm/boot/dts/renesas/r8a7742-iwg21m.dtsi
index b281a4d164b0..661cc5357b57 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7742-iwg21m.dtsi
@@ -55,8 +55,7 @@
 	rtc@68 {
 		compatible = "ti,bq32000";
 		reg = <0x68>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&gpio1 1 IRQ_TYPE_EDGE_FALLING>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/renesas/r8a7742.dtsi
index 420e0b3259d4..9083d288cc33 100644
--- a/arch/arm/boot/dts/r8a7742.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7742.dtsi
@@ -404,6 +404,64 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7742", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a7742", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a7742", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a7742", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		thermal: thermal@e61f0000 {
 			compatible = "renesas,thermal-r8a7742",
 				     "renesas,rcar-gen2-thermal";
@@ -633,7 +691,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7742",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -645,11 +703,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
@@ -1155,7 +1213,7 @@
 
 		rcar_sound: sound@ec500000 {
 			/*
-			 * #sound-dai-cells is required
+			 * #sound-dai-cells is required if simple-card
 			 *
 			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
 			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
@@ -1298,7 +1356,7 @@
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi1: ssi-1 {
-					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>,
 					       <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
@@ -1593,7 +1651,6 @@
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
 			resets = <&cpg 315>;
-			reg-io-width = <4>;
 			status = "disabled";
 			max-frequency = <97500000>;
 		};
@@ -1609,7 +1666,6 @@
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
 			resets = <&cpg 305>;
-			reg-io-width = <4>;
 			status = "disabled";
 			max-frequency = <97500000>;
 		};
@@ -1880,6 +1936,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clock - can be overridden by the board */
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/renesas/r8a7743-iwg20d-q7-dbcm-ca.dts
index 0d006aea99da..0d006aea99da 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/renesas/r8a7743-iwg20d-q7-dbcm-ca.dts
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/renesas/r8a7743-iwg20d-q7.dts
index 498e223a5f93..498e223a5f93 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
+++ b/arch/arm/boot/dts/renesas/r8a7743-iwg20d-q7.dts
diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/renesas/r8a7743-iwg20m.dtsi
index b3fee1d61c87..b3fee1d61c87 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7743-iwg20m.dtsi
diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/renesas/r8a7743-sk-rzg1m.dts
index ff274bfcb664..9b16fe7ce713 100644
--- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
+++ b/arch/arm/boot/dts/renesas/r8a7743-sk-rzg1m.dts
@@ -73,8 +73,7 @@
 		compatible = "ethernet-phy-id0022.1537",
 			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
-		interrupt-parent = <&irqc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc 0 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
 		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 	};
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/renesas/r8a7743.dtsi
index c0c145a5fe8d..58a06cf37784 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7743.dtsi
@@ -329,6 +329,64 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7743", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a7743", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a7743", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a7743", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		thermal: thermal@e61f0000 {
 			compatible = "renesas,thermal-r8a7743",
 				     "renesas,rcar-gen2-thermal";
@@ -584,7 +642,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7743",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -596,11 +654,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
@@ -1190,7 +1248,7 @@
 
 		rcar_sound: sound@ec500000 {
 			/*
-			 * #sound-dai-cells is required
+			 * #sound-dai-cells is required if simple-card
 			 *
 			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
 			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
@@ -1581,7 +1639,6 @@
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
 			resets = <&cpg 315>;
-			reg-io-width = <4>;
 			max-frequency = <97500000>;
 			status = "disabled";
 		};
@@ -1788,6 +1845,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clock - can be overridden by the board */
diff --git a/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/renesas/r8a7744-iwg20d-q7-dbcm-ca.dts
index 3e58c2e92e03..3e58c2e92e03 100644
--- a/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/renesas/r8a7744-iwg20d-q7-dbcm-ca.dts
diff --git a/arch/arm/boot/dts/r8a7744-iwg20d-q7.dts b/arch/arm/boot/dts/renesas/r8a7744-iwg20d-q7.dts
index 1fdac528f274..1fdac528f274 100644
--- a/arch/arm/boot/dts/r8a7744-iwg20d-q7.dts
+++ b/arch/arm/boot/dts/renesas/r8a7744-iwg20d-q7.dts
diff --git a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi b/arch/arm/boot/dts/renesas/r8a7744-iwg20m.dtsi
index 82ee3c1140ef..82ee3c1140ef 100644
--- a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7744-iwg20m.dtsi
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/renesas/r8a7744.dtsi
index 3f4fb53dd6df..034244648d18 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7744.dtsi
@@ -329,6 +329,64 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7744", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a7744", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a7744", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a7744", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		thermal: thermal@e61f0000 {
 			compatible = "renesas,thermal-r8a7744",
 				     "renesas,rcar-gen2-thermal";
@@ -584,7 +642,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7744",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -596,11 +654,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
@@ -1190,7 +1248,7 @@
 
 		rcar_sound: sound@ec500000 {
 			/*
-			 * #sound-dai-cells is required
+			 * #sound-dai-cells is required if simple-card
 			 *
 			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
 			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
@@ -1581,7 +1639,6 @@
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
 			resets = <&cpg 315>;
-			reg-io-width = <4>;
 			max-frequency = <97500000>;
 			status = "disabled";
 		};
@@ -1774,6 +1831,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clock - can be overridden by the board */
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts
index b1f679da36b2..5903c1f1356f 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
+++ b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts
@@ -34,6 +34,15 @@
 			};
 		};
 	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &du {
@@ -75,12 +84,17 @@
 	hdmi@39 {
 		compatible = "adi,adv7511w";
 		reg = <0x39>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio1 0 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&cec_clock>;
 		clock-names = "cec";
 		pd-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
 
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		dvdd-3v-supply = <&reg_3p3v>;
+		bgvdd-supply = <&reg_1p8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts
index c105932f642e..3ac2526a24a1 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts
@@ -182,11 +182,10 @@
 		VDDIO-supply = <&reg_3p3v>;
 	};
 
-	stmpe811@44 {
+	port-expander@44 {
 		compatible = "st,stmpe811";
 		reg = <0x44>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_LOW>;
 
 		/* 3.25 MHz ADC clock speed */
 		st,adc-freq = <1>;
@@ -197,7 +196,7 @@
 		/* internal ADC reference */
 		st,ref-sel = <0>;
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
diff --git a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi b/arch/arm/boot/dts/renesas/r8a7745-iwg22m.dtsi
index 41f111b99a75..41f111b99a75 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7745-iwg22m.dtsi
diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/renesas/r8a7745-sk-rzg1e.dts
index 0a75e8c79acc..571615a50620 100644
--- a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
+++ b/arch/arm/boot/dts/renesas/r8a7745-sk-rzg1e.dts
@@ -68,8 +68,7 @@
 		compatible = "ethernet-phy-id0022.1537",
 			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
-		interrupt-parent = <&irqc>;
-		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc 8 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
 		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 	};
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/renesas/r8a7745.dtsi
index fe8e98a66d93..704fa6f3cbd0 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7745.dtsi
@@ -304,6 +304,64 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7745", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a7745", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a7745", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a7745", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
@@ -525,7 +583,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7745",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -537,11 +595,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
@@ -1120,7 +1178,7 @@
 
 		rcar_sound: sound@ec500000 {
 			/*
-			 * #sound-dai-cells is required
+			 * #sound-dai-cells is required if simple-card
 			 *
 			 * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
 			 * Multi  DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
@@ -1455,7 +1513,6 @@
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
 			resets = <&cpg 315>;
-			reg-io-width = <4>;
 			max-frequency = <97500000>;
 			status = "disabled";
 		};
@@ -1578,6 +1635,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clock - can be overridden by the board */
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/renesas/r8a77470-iwg23s-sbc.dts
index 644802285249..e511eb425bc5 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/renesas/r8a77470-iwg23s-sbc.dts
@@ -82,8 +82,7 @@
 		compatible = "ethernet-phy-id0022.1622",
 			     "ethernet-phy-ieee802.3-c22";
 		reg = <3>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio5 16 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
 	};
 };
@@ -151,8 +150,7 @@
 	hdmi@39 {
 		compatible = "sil,sii9022";
 		reg = <0x39>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio2 29 IRQ_TYPE_LEVEL_LOW>;
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/renesas/r8a77470.dtsi
index c90f2a270214..a8a12275c98a 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a77470.dtsi
@@ -241,6 +241,50 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a77470", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a77470", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a77470", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
@@ -357,7 +401,7 @@
 			status = "disabled";
 		};
 
-		usbphy0: usb-phy@e6590100 {
+		usbphy0: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a77470",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -369,7 +413,7 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
@@ -393,7 +437,7 @@
 			status = "disabled";
 		};
 
-		usbphy1: usb-phy@e6598100 {
+		usbphy1: usb-phy-controller@e6598100 {
 			compatible = "renesas,usb-phy-r8a77470",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6598100 0 0x100>;
@@ -405,7 +449,7 @@
 			resets = <&cpg 706>;
 			status = "disabled";
 
-			usb1: usb-channel@0 {
+			usb1: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
@@ -1017,6 +1061,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clock - can be overridden by the board */
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/renesas/r8a7778-bockw.dts
index 9b65d246e583..a99d226f41a6 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/renesas/r8a7778-bockw.dts
@@ -61,14 +61,42 @@
 	};
 };
 
-&bsc {
+&lbsc {
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x04000000>;
+		pinctrl-0 = <&flash_pins>;
+		pinctrl-names = "default";
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "uboot-env";
+				reg = <0x00040000 0x00040000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "flash";
+				reg = <0x00080000 0x03f80000>;
+			};
+		};
+	};
+
 	ethernet@18300000 {
 		compatible = "smsc,lan89218", "smsc,lan9115";
 		reg = <0x18300000 0x1000>;
 
 		phy-mode = "mii";
-		interrupt-parent = <&irqpin>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&irqpin 0 IRQ_TYPE_EDGE_FALLING>;
 		reg-io-width = <4>;
 		vddvario-supply = <&fixedregulator3v3>;
 		vdd33a-supply = <&fixedregulator3v3>;
@@ -126,6 +154,11 @@
 	pinctrl-0 = <&scif_clk_pins>;
 	pinctrl-names = "default";
 
+	flash_pins: flash {
+		groups = "lbsc_cs0";
+		function = "lbsc";
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data_a", "scif0_ctrl";
 		function = "scif0";
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/renesas/r8a7778.dtsi
index 95efbafb0b70..859dd29dfce3 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7778.dtsi
@@ -40,7 +40,7 @@
 		spi2 = &hspi2;
 	};
 
-	bsc: bus@1c000000 {
+	lbsc: bus {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -199,7 +199,9 @@
 		reg = <0xffd80000 0x30>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 		clocks = <&mstp0_clks R8A7778_CLK_TMU0>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -214,7 +216,9 @@
 		reg = <0xffd81000 0x30>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 		clocks = <&mstp0_clks R8A7778_CLK_TMU1>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -230,6 +234,7 @@
 		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2";
 		clocks = <&mstp0_clks R8A7778_CLK_TMU2>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -241,7 +246,7 @@
 
 	rcar_sound: sound@ffd90000 {
 		/*
-		 * #sound-dai-cells is required
+		 * #sound-dai-cells is required if simple-card
 		 *
 		 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
 		 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
@@ -250,6 +255,8 @@
 		reg =	<0xffd90000 0x1000>,	/* SRU */
 			<0xffd91000 0x240>,	/* SSI */
 			<0xfffe0000 0x24>;	/* ADG */
+		reg-names = "sru", "ssi", "adg";
+
 		clocks = <&mstp3_clks R8A7778_CLK_SSI8>,
 			<&mstp3_clks R8A7778_CLK_SSI7>,
 			<&mstp3_clks R8A7778_CLK_SSI6>,
diff --git a/arch/arm/boot/dts/renesas/r8a7779-marzen.dts b/arch/arm/boot/dts/renesas/r8a7779-marzen.dts
new file mode 100644
index 000000000000..2920d87ea6ff
--- /dev/null
+++ b/arch/arm/boot/dts/renesas/r8a7779-marzen.dts
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car H1 (R8A77790) Marzen board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ */
+
+/dts-v1/;
+#include "r8a7779.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "marzen";
+	compatible = "renesas,marzen", "renesas,r8a7779";
+
+	aliases {
+		serial0 = &scif2;
+		serial1 = &scif4;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	fixedregulator3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	keypad-0 {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&keypad0_pins>;
+		pinctrl-names = "default";
+
+		key-1 {
+			interrupts-extended = <&gpio0 17 IRQ_TYPE_EDGE_FALLING>;
+			linux,code = <KEY_1>;
+			label = "SW1-1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			interrupts-extended = <&gpio0 18 IRQ_TYPE_EDGE_FALLING>;
+			linux,code = <KEY_2>;
+			label = "SW1-2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	keypad-1 {
+		compatible = "gpio-keys-polled";
+		poll-interval = <50>;
+
+		pinctrl-0 = <&keypad1_pins>;
+		pinctrl-names = "default";
+
+		key-3 {
+			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW1-3";
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW1-4";
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led2 {
+			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		};
+		led3 {
+			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		};
+		led4 {
+			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				vga_enc_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				vga_enc_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&vga_enc_out>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "thine,thc63lvdm83d";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				lvds_enc_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				lvds_connector: endpoint {
+				};
+			};
+		};
+	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <65000000>;
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>;
+	clock-names = "du.0", "dclkin.0";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&vga_enc_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lvds_enc_in>;
+			};
+		};
+	};
+};
+
+&gpio0 {
+	keypad0-hog {
+		gpio-hog;
+		gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <100000>;
+};
+
+&irqpin0 {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <31250000>;
+};
+
+&lbsc {
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x04000000>;
+		pinctrl-0 = <&flash_pins>;
+		pinctrl-names = "default";
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "uboot-env";
+				reg = <0x00040000 0x00040000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "flash";
+				reg = <0x00080000 0x03f80000>;
+			};
+		};
+	};
+
+	ethernet@18000000 {
+		compatible = "smsc,lan89218", "smsc,lan9115";
+		reg = <0x18000000 0x100>;
+		pinctrl-0 = <&ethernet_pins>;
+		pinctrl-names = "default";
+
+		phy-mode = "mii";
+		interrupts-extended = <&irqpin0 1 IRQ_TYPE_EDGE_FALLING>;
+		smsc,irq-push-pull;
+		reg-io-width = <4>;
+		vddvario-supply = <&fixedregulator3v3>;
+		vdd33a-supply = <&fixedregulator3v3>;
+	};
+};
+
+&tmu0 {
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	du_pins: du {
+		du0 {
+			groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0", "du0_clk_in";
+			function = "du0";
+		};
+		du1 {
+			groups = "du1_rgb666", "du1_sync_1", "du1_clk_out";
+			function = "du1";
+		};
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_b";
+		function = "scif_clk";
+	};
+
+	ethernet_pins: ethernet {
+		intc {
+			groups = "intc_irq1_b";
+			function = "intc";
+		};
+		lbsc {
+			groups = "lbsc_ex_cs0";
+			function = "lbsc";
+		};
+	};
+
+	flash_pins: flash {
+		groups = "lbsc_cs0";
+		function = "lbsc";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_c";
+		function = "scif2";
+	};
+
+	scif4_pins: scif4 {
+		groups = "scif4_data";
+		function = "scif4";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
+		function = "sdhi0";
+	};
+
+	hspi0_pins: hspi0 {
+		groups = "hspi0";
+		function = "hspi0";
+	};
+
+	keypad0_pins: keypad-0 {
+		pins = "GP_0_17", "GP_0_18";
+		bias-pull-up;
+	};
+	keypad1_pins: keypad-1 {
+		pins = "GP_0_19", "GP_0_20";
+		bias-pull-up;
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif4 {
+	pinctrl-0 = <&scif4_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&fixedregulator3v3>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&hspi0 {
+	pinctrl-0 = <&hspi0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/renesas/r8a7779.dtsi
index 39fc58f32df6..e437c22f452d 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7779.dtsi
@@ -324,6 +324,69 @@
 		status = "disabled";
 	};
 
+	pwm0: pwm@ffe50000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe50000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ffe51000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe51000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ffe52000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe52000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ffe53000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe53000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	pwm4: pwm@ffe54000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe54000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	pwm5: pwm@ffe55000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe55000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	pwm6: pwm@ffe56000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe56000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
 	pfc: pinctrl@fffc0000 {
 		compatible = "renesas,pfc-r8a7779";
 		reg = <0xfffc0000 0x23c>;
@@ -339,7 +402,9 @@
 		reg = <0xffd80000 0x30>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 		clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
 		clock-names = "fck";
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
@@ -354,7 +419,9 @@
 		reg = <0xffd81000 0x30>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 		clocks = <&mstp0_clks R8A7779_CLK_TMU1>;
 		clock-names = "fck";
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
@@ -370,6 +437,7 @@
 		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2";
 		clocks = <&mstp0_clks R8A7779_CLK_TMU2>;
 		clock-names = "fck";
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
@@ -554,7 +622,8 @@
 			compatible = "renesas,r8a7779-mstp-clocks",
 				     "renesas,cpg-mstp-clocks";
 			reg = <0xffc80030 4>;
-			clocks = <&cpg_clocks R8A7779_CLK_S>,
+			clocks = <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_S>,
 				 <&cpg_clocks R8A7779_CLK_P>,
 				 <&cpg_clocks R8A7779_CLK_P>,
 				 <&cpg_clocks R8A7779_CLK_P>,
@@ -572,20 +641,21 @@
 				 <&cpg_clocks R8A7779_CLK_P>;
 			#clock-cells = <1>;
 			clock-indices = <
-				R8A7779_CLK_HSPI R8A7779_CLK_TMU2
-				R8A7779_CLK_TMU1 R8A7779_CLK_TMU0
-				R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0
-				R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4
-				R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2
-				R8A7779_CLK_SCIF1 R8A7779_CLK_SCIF0
-				R8A7779_CLK_I2C3 R8A7779_CLK_I2C2
-				R8A7779_CLK_I2C1 R8A7779_CLK_I2C0
+				R8A7779_CLK_PWM R8A7779_CLK_HSPI
+				R8A7779_CLK_TMU2 R8A7779_CLK_TMU1
+				R8A7779_CLK_TMU0 R8A7779_CLK_HSCIF1
+				R8A7779_CLK_HSCIF0 R8A7779_CLK_SCIF5
+				R8A7779_CLK_SCIF4 R8A7779_CLK_SCIF3
+				R8A7779_CLK_SCIF2 R8A7779_CLK_SCIF1
+				R8A7779_CLK_SCIF0 R8A7779_CLK_I2C3
+				R8A7779_CLK_I2C2 R8A7779_CLK_I2C1
+				R8A7779_CLK_I2C0
 			>;
 			clock-output-names =
-				"hspi", "tmu2", "tmu1", "tmu0", "hscif1",
-				"hscif0", "scif5", "scif4", "scif3", "scif2",
-				"scif1", "scif0", "i2c3", "i2c2", "i2c1",
-				"i2c0";
+				"pwm", "hspi", "tmu2", "tmu1", "tmu0",
+				"hscif1", "hscif0", "scif5", "scif4", "scif3",
+				"scif2", "scif1", "scif0", "i2c3", "i2c2",
+				"i2c1", "i2c0";
 		};
 		mstp1_clks: clocks@ffc80034 {
 			compatible = "renesas,r8a7779-mstp-clocks",
@@ -634,6 +704,13 @@
 		};
 	};
 
+	lbsc: bus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x1c000000>;
+	};
+
 	prr: chipid@ff000044 {
 		compatible = "renesas,prr";
 		reg = <0xff000044 4>;
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/renesas/r8a7790-lager.dts
index 5ad5349a50dc..4f002aa7fbaf 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/renesas/r8a7790-lager.dts
@@ -73,39 +73,34 @@
 		reg = <1 0x40000000 0 0xc0000000>;
 	};
 
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
 	keyboard {
 		compatible = "gpio-keys";
 
 		pinctrl-0 = <&keyboard_pins>;
 		pinctrl-names = "default";
 
-		one {
+		key-1 {
 			linux,code = <KEY_1>;
 			label = "SW2-1";
 			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
-		two {
+		key-2 {
 			linux,code = <KEY_2>;
 			label = "SW2-2";
 			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 		};
-		three {
+		key-3 {
 			linux,code = <KEY_3>;
 			label = "SW2-3";
 			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
 		};
-		four {
+		key-4 {
 			linux,code = <KEY_4>;
 			label = "SW2-4";
 			wakeup-source;
@@ -127,6 +122,15 @@
 		};
 	};
 
+	fixedregulator1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	fixedregulator3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
@@ -308,7 +312,7 @@
 	 *
 	 * IIC0/I2C0 does not appear to support fallback to GPIO.
 	 */
-	i2cexio0: i2c-10 {
+	i2cexio0: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&iic0>, <&i2c0>;
 		i2c-bus-name = "i2c-exio0";
@@ -321,7 +325,7 @@
 	 * This is similar to the arangement described for i2cexio0 (above)
 	 * with a fallback to GPIO also provided.
 	 */
-	i2cexio1: i2c-11 {
+	i2cexio1: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-exio1";
@@ -333,7 +337,7 @@
 	 * IIC2 and I2C2 may be switched using pinmux.
 	 * A fallback to GPIO is also provided.
 	 */
-	i2chdmi: i2c-12 {
+	i2chdmi: i2c-mux3 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -361,11 +365,16 @@
 		hdmi@39 {
 			compatible = "adi,adv7511w";
 			reg = <0x39>;
-			interrupt-parent = <&gpio1>;
-			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+			interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&cec_clock>;
 			clock-names = "cec";
 
+			avdd-supply = <&fixedregulator1v8>;
+			dvdd-supply = <&fixedregulator1v8>;
+			pvdd-supply = <&fixedregulator1v8>;
+			dvdd-3v-supply = <&fixedregulator3v3>;
+			bgvdd-supply = <&fixedregulator1v8>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -393,8 +402,7 @@
 		hdmi-in@4c {
 			compatible = "adi,adv7612";
 			reg = <0x4c>;
-			interrupt-parent = <&gpio1>;
-			interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+			interrupts-extended = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>;
 			default-input = <0>;
 
 			ports {
@@ -422,7 +430,7 @@
 	 * IIC3 and I2C3 may be switched using pinmux.
 	 * IIC3/I2C3 does not appear to support fallback to GPIO.
 	 */
-	i2cpwr: i2c-13 {
+	i2cpwr: i2c-mux4 {
 		compatible = "i2c-demux-pinctrl";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_irq_pins>;
@@ -434,9 +442,9 @@
 		pmic@58 {
 			compatible = "dlg,da9063";
 			reg = <0x58>;
-			interrupt-parent = <&irqc0>;
-			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 
 			rtc {
 				compatible = "dlg,da9063-rtc";
@@ -450,8 +458,7 @@
 		vdd_dvfs: regulator@68 {
 			compatible = "dlg,da9210";
 			reg = <0x68>;
-			interrupt-parent = <&irqc0>;
-			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;
 
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
@@ -681,8 +688,7 @@
 		compatible = "ethernet-phy-id0022.1537",
 			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
 		reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
 	};
@@ -748,6 +754,7 @@
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
@@ -879,7 +886,7 @@
 	status = "okay";
 	pinctrl-0 = <&hsusb_pins>;
 	pinctrl-names = "default";
-	renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+	renesas,enable-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
 };
 
 &usbphy {
diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/renesas/r8a7790-stout.dts
index fe14727eefe1..b1e20579e071 100644
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/renesas/r8a7790-stout.dts
@@ -44,6 +44,15 @@
 		};
 	};
 
+	fixedregulator1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	fixedregulator3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
@@ -202,8 +211,7 @@
 		compatible = "ethernet-phy-id0022.1537",
 			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc0 1 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
 		reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 	};
@@ -260,6 +268,7 @@
 &scifa0 {
 	pinctrl-0 = <&scifa0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
@@ -291,11 +300,16 @@
 	hdmi@39 {
 		compatible = "adi,adv7511w";
 		reg = <0x39>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&osc4_clk>;
 		clock-names = "cec";
 
+		avdd-supply = <&fixedregulator1v8>;
+		dvdd-supply = <&fixedregulator1v8>;
+		pvdd-supply = <&fixedregulator1v8>;
+		dvdd-3v-supply = <&fixedregulator3v3>;
+		bgvdd-supply = <&fixedregulator1v8>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
@@ -329,9 +343,9 @@
 	pmic@58 {
 		compatible = "dlg,da9063";
 		reg = <0x58>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
@@ -349,8 +363,7 @@
 	vdd_dvfs: regulator@68 {
 		compatible = "dlg,da9210";
 		reg = <0x68>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;
 
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <1000000>;
@@ -361,8 +374,7 @@
 	vdd: regulator@70 {
 		compatible = "dlg,da9210";
 		reg = <0x70>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;
 
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <1000000>;
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/renesas/r8a7790.dtsi
index a640488d513b..4f97c09dbc9f 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7790.dtsi
@@ -227,6 +227,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board. */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	/* External PCIe clock - can be overridden by the board */
@@ -265,6 +266,7 @@
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
+		bootph-all;
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -374,6 +376,18 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a7790";
 			reg = <0 0xe6060000 0 0x250>;
+			bootph-all;
+		};
+
+		tpu: pwm@e60f0000 {
+			compatible = "renesas,tpu-r8a7790", "renesas,tpu";
+			reg = <0 0xe60f0000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
 		};
 
 		cpg: clock-controller@e6150000 {
@@ -384,6 +398,7 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		apmu@e6151000 {
@@ -401,6 +416,7 @@
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a7790-rst";
 			reg = <0 0xe6160000 0 0x0100>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -423,6 +439,64 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7790", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a7790", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a7790", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a7790", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		thermal: thermal@e61f0000 {
 			compatible = "renesas,thermal-r8a7790",
 				     "renesas,rcar-gen2-thermal",
@@ -654,7 +728,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7790",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -666,11 +740,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
@@ -1037,6 +1111,76 @@
 			status = "disabled";
 		};
 
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
 		can0: can@e6e80000 {
 			compatible = "renesas,can-r8a7790",
 				     "renesas,rcar-gen2-can";
@@ -1109,7 +1253,7 @@
 
 		rcar_sound: sound@ec500000 {
 			/*
-			 * #sound-dai-cells is required
+			 * #sound-dai-cells is required if simple-card
 			 *
 			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
 			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
@@ -1252,7 +1396,7 @@
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi1: ssi-1 {
-					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>,
 					       <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
@@ -1547,7 +1691,6 @@
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 			resets = <&cpg 315>;
-			reg-io-width = <4>;
 			status = "disabled";
 			max-frequency = <97500000>;
 		};
@@ -1563,7 +1706,6 @@
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 			resets = <&cpg 305>;
-			reg-io-width = <4>;
 			status = "disabled";
 			max-frequency = <97500000>;
 		};
@@ -1811,6 +1953,7 @@
 		prr: chipid@ff000044 {
 			compatible = "renesas,prr";
 			reg = <0 0xff000044 0 4>;
+			bootph-all;
 		};
 
 		cmt0: timer@ffca0000 {
@@ -1873,6 +2016,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clock - can be overridden by the board */
@@ -1880,5 +2024,6 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
+		bootph-all;
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
index 26a40782cc89..e9f90fa44d55 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
@@ -73,11 +73,6 @@
 		reg = <2 0x00000000 0 0x40000000>;
 	};
 
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
 	keyboard {
 		compatible = "gpio-keys";
 
@@ -179,6 +174,24 @@
 		};
 	};
 
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -345,7 +358,7 @@
 	 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio1: i2c-12 {
+	i2cexio1: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-exio1";
@@ -356,7 +369,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C2.
 	 */
-	i2chdmi: i2c-13 {
+	i2chdmi: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -384,11 +397,16 @@
 		hdmi@39 {
 			compatible = "adi,adv7511w";
 			reg = <0x39>;
-			interrupt-parent = <&gpio3>;
-			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+			interrupts-extended = <&gpio3 29 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&cec_clock>;
 			clock-names = "cec";
 
+			avdd-supply = <&reg_1p8v>;
+			dvdd-supply = <&reg_1p8v>;
+			pvdd-supply = <&reg_1p8v>;
+			dvdd-3v-supply = <&reg_3p3v>;
+			bgvdd-supply = <&reg_1p8v>;
+
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
@@ -416,8 +434,7 @@
 		hdmi-in@4c {
 			compatible = "adi,adv7612";
 			reg = <0x4c>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupts-extended = <&gpio4 2 IRQ_TYPE_LEVEL_LOW>;
 			default-input = <0>;
 
 			ports {
@@ -451,7 +468,7 @@
 	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio4: i2c-14 {
+	i2cexio4: i2c-mux3 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c4>, <&gpioi2c4>;
 		i2c-bus-name = "i2c-exio4";
@@ -640,8 +657,7 @@
 		compatible = "ethernet-phy-id0022.1537",
 			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
 		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 	};
@@ -663,6 +679,7 @@
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
@@ -797,9 +814,9 @@
 	pmic@58 {
 		compatible = "dlg,da9063";
 		reg = <0x58>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
@@ -813,8 +830,7 @@
 	vdd_dvfs: regulator@68 {
 		compatible = "dlg,da9210";
 		reg = <0x68>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;
 
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <1000000>;
@@ -839,7 +855,7 @@
 	status = "okay";
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
-	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+	renesas,enable-gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
 };
 
 &usbphy {
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/renesas/r8a7791-porter.dts
index ec0a20d5130d..81b3c5d74e9b 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/renesas/r8a7791-porter.dts
@@ -47,6 +47,24 @@
 		reg = <2 0x00000000 0 0x40000000>;
 	};
 
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -148,7 +166,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C2.
 	 */
-	i2chdmi: i2c-10 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -176,8 +194,13 @@
 		hdmi@39 {
 			compatible = "adi,adv7511w";
 			reg = <0x39>;
-			interrupt-parent = <&gpio3>;
-			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+			interrupts-extended = <&gpio3 29 IRQ_TYPE_LEVEL_LOW>;
+
+			avdd-supply = <&reg_1p8v>;
+			dvdd-supply = <&reg_1p8v>;
+			pvdd-supply = <&reg_1p8v>;
+			dvdd-3v-supply = <&reg_3p3v>;
+			bgvdd-supply = <&reg_1p8v>;
 
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
@@ -266,7 +289,7 @@
 	};
 
 	can0_pins: can0 {
-		groups = "can0_data";
+		groups = "can0_data_b";
 		function = "can0";
 	};
 
@@ -289,6 +312,7 @@
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
@@ -305,8 +329,7 @@
 		compatible = "ethernet-phy-id0022.1537",
 			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
 		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 	};
@@ -386,9 +409,9 @@
 	pmic@5a {
 		compatible = "dlg,da9063l";
 		reg = <0x5a>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		watchdog {
 			compatible = "dlg,da9063-watchdog";
@@ -398,8 +421,7 @@
 	vdd_dvfs: regulator@68 {
 		compatible = "dlg,da9210";
 		reg = <0x68>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;
 
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <1000000>;
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/renesas/r8a7791.dtsi
index 542ed0a71872..5023b41c28b3 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7791.dtsi
@@ -125,6 +125,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board. */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	/* External PCIe clock - can be overridden by the board */
@@ -152,6 +153,7 @@
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
+		bootph-all;
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -291,6 +293,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a7791";
 			reg = <0 0xe6060000 0 0x250>;
+			bootph-all;
 		};
 
 		tpu: pwm@e60f0000 {
@@ -312,6 +315,7 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		apmu@e6152000 {
@@ -323,6 +327,7 @@
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a7791-rst";
 			reg = <0 0xe6160000 0 0x0100>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -351,6 +356,64 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7791", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a7791", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a7791", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a7791", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		thermal: thermal@e61f0000 {
 			compatible = "renesas,thermal-r8a7791",
 				     "renesas,rcar-gen2-thermal",
@@ -608,7 +671,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7791",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -620,11 +683,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
@@ -1223,7 +1286,7 @@
 
 		rcar_sound: sound@ec500000 {
 			/*
-			 * #sound-dai-cells is required
+			 * #sound-dai-cells is required if simple-card
 			 *
 			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
 			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
@@ -1365,7 +1428,7 @@
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi1: ssi-1 {
-					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>,
 					       <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
@@ -1622,7 +1685,6 @@
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 			resets = <&cpg 315>;
-			reg-io-width = <4>;
 			status = "disabled";
 			max-frequency = <97500000>;
 		};
@@ -1818,6 +1880,7 @@
 		prr: chipid@ff000044 {
 			compatible = "renesas,prr";
 			reg = <0 0xff000044 0 4>;
+			bootph-all;
 		};
 
 		cmt0: timer@ffca0000 {
@@ -1880,6 +1943,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clock - can be overridden by the board */
@@ -1887,5 +1951,6 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
+		bootph-all;
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
index c66de9dd12df..23ec0f8a6651 100644
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
@@ -30,6 +30,15 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
+	d1_8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3_3v: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "D3.3V";
@@ -39,21 +48,6 @@
 		regulator-always-on;
 	};
 
-	ethernet@18000000 {
-		compatible = "smsc,lan89218", "smsc,lan9115";
-		reg = <0 0x18000000 0 0x100>;
-		phy-mode = "mii";
-		interrupt-parent = <&irqc>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-		smsc,irq-push-pull;
-		reg-io-width = <4>;
-		vddvario-supply = <&d3_3v>;
-		vdd33a-supply = <&d3_3v>;
-
-		pinctrl-0 = <&lan89218_pins>;
-		pinctrl-names = "default";
-	};
-
 	vga-encoder {
 		compatible = "adi,adv7123";
 
@@ -196,6 +190,51 @@
 	clock-frequency = <48000000>;
 };
 
+&lbsc {
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0x00000000 0x04000000>;
+		pinctrl-0 = <&flash_pins>;
+		pinctrl-names = "default";
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "uboot-env";
+				reg = <0x00040000 0x00040000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "flash";
+				reg = <0x00080000 0x03f80000>;
+			};
+		};
+	};
+
+	ethernet@18000000 {
+		compatible = "smsc,lan89218", "smsc,lan9115";
+		reg = <0x18000000 0x100>;
+		phy-mode = "mii";
+		interrupts-extended = <&irqc 0 IRQ_TYPE_EDGE_FALLING>;
+		smsc,irq-push-pull;
+		reg-io-width = <4>;
+		vddvario-supply = <&d3_3v>;
+		vdd33a-supply = <&d3_3v>;
+
+		pinctrl-0 = <&lan89218_pins>;
+		pinctrl-names = "default";
+	};
+};
+
 &pfc {
 	scif0_pins: scif0 {
 		groups = "scif0_data";
@@ -238,8 +277,13 @@
 		function = "du1";
 	};
 
+	flash_pins: flash {
+		groups = "lbsc_cs0";
+		function = "lbsc";
+	};
+
 	keyboard_pins: keyboard {
-		pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_02";
+		pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_2";
 		bias-pull-up;
 	};
 
@@ -257,6 +301,7 @@
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
@@ -291,8 +336,13 @@
 	hdmi@39 {
 		compatible = "adi,adv7511w";
 		reg = <0x39>;
-		interrupt-parent = <&irqc>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&irqc 3 IRQ_TYPE_EDGE_FALLING>;
+
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+		bgvdd-supply = <&d1_8v>;
 
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
@@ -327,9 +377,9 @@
 		reg = <0x58>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_irq_pins>;
-		interrupt-parent = <&irqc>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc 2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/renesas/r8a7792-wheat.dts
index 434e4655be9d..93bd81723c8f 100644
--- a/arch/arm/boot/dts/r8a7792-wheat.dts
+++ b/arch/arm/boot/dts/renesas/r8a7792-wheat.dts
@@ -29,6 +29,15 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
+	d1_8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3_3v: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "D3.3V";
@@ -38,22 +47,6 @@
 		regulator-always-on;
 	};
 
-	ethernet@18000000 {
-		compatible = "smsc,lan89218", "smsc,lan9115";
-		reg = <0 0x18000000 0 0x100>;
-		phy-mode = "mii";
-		interrupt-parent = <&irqc>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-		smsc,irq-push-pull;
-		smsc,save-mac-address;
-		reg-io-width = <4>;
-		vddvario-supply = <&d3_3v>;
-		vdd33a-supply = <&d3_3v>;
-
-		pinctrl-0 = <&lan89218_pins>;
-		pinctrl-names = "default";
-	};
-
 	keyboard {
 		compatible = "gpio-keys";
 
@@ -117,6 +110,23 @@
 	clock-frequency = <20000000>;
 };
 
+&lbsc {
+	ethernet@18000000 {
+		compatible = "smsc,lan89218", "smsc,lan9115";
+		reg = <0x18000000 0x100>;
+		phy-mode = "mii";
+		interrupts-extended = <&irqc 0 IRQ_TYPE_EDGE_FALLING>;
+		smsc,irq-push-pull;
+		smsc,save-mac-address;
+		reg-io-width = <4>;
+		vddvario-supply = <&d3_3v>;
+		vdd33a-supply = <&d3_3v>;
+
+		pinctrl-0 = <&lan89218_pins>;
+		pinctrl-names = "default";
+	};
+};
+
 &pfc {
 	scif0_pins: scif0 {
 		groups = "scif0_data";
@@ -173,6 +183,7 @@
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
@@ -252,6 +263,12 @@
 		reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
 		reg-names = "main", "edid", "cec", "packet";
 
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+		bgvdd-supply = <&d1_8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
@@ -281,6 +298,12 @@
 		reg = <0x39>, <0x49>, <0x29>, <0x59>;
 		reg-names = "main", "edid", "cec", "packet";
 
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+		bgvdd-supply = <&d1_8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/renesas/r8a7792.dtsi
index a6d9367f8fa0..7513afc1c958 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7792.dtsi
@@ -82,6 +82,14 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board. */
 		clock-frequency = <0>;
+		bootph-all;
+	};
+
+	lbsc: bus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x1c000000>;
 	};
 
 	pmu {
@@ -102,6 +110,7 @@
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
+		bootph-all;
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -301,6 +310,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a7792";
 			reg = <0 0xe6060000 0 0x144>;
+			bootph-all;
 		};
 
 		cpg: clock-controller@e6150000 {
@@ -311,6 +321,7 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		apmu@e6152000 {
@@ -322,6 +333,7 @@
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a7792-rst";
 			reg = <0 0xe6160000 0 0x0100>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -344,6 +356,65 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7792", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a7792", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a7792", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a7792", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
@@ -881,6 +952,7 @@
 		prr: chipid@ff000044 {
 			compatible = "renesas,prr";
 			reg = <0 0xff000044 0 4>;
+			bootph-all;
 		};
 
 		cmt0: timer@ffca0000 {
@@ -924,5 +996,6 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/renesas/r8a7793-gose.dts
index 79b537b24642..45b267ec2679 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/renesas/r8a7793-gose.dts
@@ -165,6 +165,24 @@
 		};
 	};
 
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -324,7 +342,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C2.
 	 */
-	i2chdmi: i2c-11 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c2>, <&gpioi2c2>;
 		i2c-bus-name = "i2c-hdmi";
@@ -365,8 +383,13 @@
 		hdmi@39 {
 			compatible = "adi,adv7511w";
 			reg = <0x39>;
-			interrupt-parent = <&gpio3>;
-			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+			interrupts-extended = <&gpio3 29 IRQ_TYPE_LEVEL_LOW>;
+
+			avdd-supply = <&reg_1p8v>;
+			dvdd-supply = <&reg_1p8v>;
+			pvdd-supply = <&reg_1p8v>;
+			dvdd-3v-supply = <&reg_3p3v>;
+			bgvdd-supply = <&reg_1p8v>;
 
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
@@ -395,8 +418,7 @@
 		hdmi-in@4c {
 			compatible = "adi,adv7612";
 			reg = <0x4c>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupts-extended = <&gpio4 2 IRQ_TYPE_LEVEL_LOW>;
 			default-input = <0>;
 
 			ports {
@@ -430,7 +452,7 @@
 	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio4: i2c-12 {
+	i2cexio4: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c4>, <&gpioi2c4>;
 		i2c-bus-name = "i2c-exio4";
@@ -598,8 +620,7 @@
 		compatible = "ethernet-phy-id0022.1537",
 			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
 		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 	};
@@ -621,6 +642,7 @@
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
@@ -732,9 +754,9 @@
 	pmic@58 {
 		compatible = "dlg,da9063";
 		reg = <0x58>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
@@ -748,8 +770,7 @@
 	vdd_dvfs: regulator@68 {
 		compatible = "dlg,da9210";
 		reg = <0x68>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;
 
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <1000000>;
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/renesas/r8a7793.dtsi
index 9ebe7bfaf0ed..fc6d3bcca296 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7793.dtsi
@@ -117,6 +117,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board. */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	pmu {
@@ -137,6 +138,7 @@
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
+		bootph-all;
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -276,6 +278,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a7793";
 			reg = <0 0xe6060000 0 0x250>;
+			bootph-all;
 		};
 
 		/* Special CPG clocks */
@@ -287,6 +290,7 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		apmu@e6152000 {
@@ -298,6 +302,7 @@
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a7793-rst";
 			reg = <0 0xe6160000 0 0x0100>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -326,6 +331,64 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7793", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a7793", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a7793", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a7793", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		thermal: thermal@e61f0000 {
 			compatible = "renesas,thermal-r8a7793",
 				     "renesas,rcar-gen2-thermal",
@@ -988,7 +1051,7 @@
 
 		rcar_sound: sound@ec500000 {
 			/*
-			 * #sound-dai-cells is required
+			 * #sound-dai-cells is required if simple-card
 			 *
 			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
 			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
@@ -1111,7 +1174,7 @@
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi1: ssi-1 {
-					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>,
 					       <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
@@ -1285,7 +1348,6 @@
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 			resets = <&cpg 315>;
-			reg-io-width = <4>;
 			status = "disabled";
 			max-frequency = <97500000>;
 		};
@@ -1397,6 +1459,7 @@
 		prr: chipid@ff000044 {
 			compatible = "renesas,prr";
 			reg = <0 0xff000044 0 4>;
+			bootph-all;
 		};
 
 		cmt0: timer@ffca0000 {
@@ -1459,6 +1522,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clock - can be overridden by the board */
@@ -1466,5 +1530,6 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
+		bootph-all;
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/renesas/r8a7794-alt.dts
index 4d93319674c6..3f06a7f67d62 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/renesas/r8a7794-alt.dts
@@ -90,39 +90,34 @@
 		states = <3300000 1>, <1800000 0>;
 	};
 
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
 	keyboard {
 		compatible = "gpio-keys";
 
 		pinctrl-0 = <&keyboard_pins>;
 		pinctrl-names = "default";
 
-		one {
+		key-1 {
 			linux,code = <KEY_1>;
 			label = "SW2-1";
 			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
 		};
-		two {
+		key-2 {
 			linux,code = <KEY_2>;
 			label = "SW2-2";
 			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
 		};
-		three {
+		key-3 {
 			linux,code = <KEY_3>;
 			label = "SW2-3";
 			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
 		};
-		four {
+		key-4 {
 			linux,code = <KEY_4>;
 			label = "SW2-4";
 			wakeup-source;
@@ -197,7 +192,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C1.
 	 */
-	i2chdmi: i2c-11 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-hdmi";
@@ -227,7 +222,7 @@
 	 * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
 	 * A fallback to GPIO is provided.
 	 */
-	i2cexio4: i2c-14 {
+	i2cexio4: i2c-mux2 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c4>, <&gpioi2c4>;
 		i2c-bus-name = "i2c-exio4";
@@ -386,8 +381,7 @@
 		compatible = "ethernet-phy-id0022.1537",
 			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc0 8 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
 		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 	};
@@ -455,9 +449,9 @@
 	pmic@58 {
 		compatible = "dlg,da9063";
 		reg = <0x58>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio3 31 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
@@ -485,6 +479,7 @@
 &scif2 {
 	pinctrl-0 = <&scif2_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/renesas/r8a7794-silk.dts
index b7af1befa126..342825605768 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/renesas/r8a7794-silk.dts
@@ -102,6 +102,15 @@
 		};
 	};
 
+	d1_8v: regulator-d1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3_3v: regulator-d3-3v {
 		compatible = "regulator-fixed";
 		regulator-name = "D3.3V";
@@ -225,7 +234,7 @@
 	/*
 	 * A fallback to GPIO is provided for I2C1.
 	 */
-	i2chdmi: i2c-10 {
+	i2chdmi: i2c-mux1 {
 		compatible = "i2c-demux-pinctrl";
 		i2c-parent = <&i2c1>, <&gpioi2c1>;
 		i2c-bus-name = "i2c-hdmi";
@@ -253,8 +262,13 @@
 		hdmi@39 {
 			compatible = "adi,adv7511w";
 			reg = <0x39>;
-			interrupt-parent = <&gpio5>;
-			interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+			interrupts-extended = <&gpio5 23 IRQ_TYPE_LEVEL_LOW>;
+
+			avdd-supply = <&d1_8v>;
+			dvdd-supply = <&d1_8v>;
+			pvdd-supply = <&d1_8v>;
+			dvdd-3v-supply = <&d3_3v>;
+			bgvdd-supply = <&d1_8v>;
 
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
@@ -380,6 +394,7 @@
 &scif2 {
 	pinctrl-0 = <&scif2_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
@@ -400,8 +415,7 @@
 		compatible = "ethernet-phy-id0022.1537",
 			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&irqc0 8 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
 		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 	};
@@ -421,9 +435,9 @@
 	pmic@58 {
 		compatible = "dlg,da9063";
 		reg = <0x58>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio3 31 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/renesas/r8a7794.dtsi
index b601ee6f7580..92010d09f6c4 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7794.dtsi
@@ -99,6 +99,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board. */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	pmu {
@@ -119,6 +120,7 @@
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
+		bootph-all;
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -243,6 +245,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a7794";
 			reg = <0 0xe6060000 0 0x11c>;
+			bootph-all;
 		};
 
 		cpg: clock-controller@e6150000 {
@@ -253,6 +256,7 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		apmu@e6151000 {
@@ -264,6 +268,7 @@
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a7794-rst";
 			reg = <0 0xe6160000 0 0x0100>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -292,6 +297,64 @@
 			resets = <&cpg 407>;
 		};
 
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7794", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@fff60000 {
+			compatible = "renesas,tmu-r8a7794", "renesas,tmu";
+			reg = <0 0xfff60000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 111>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 111>;
+			status = "disabled";
+		};
+
+		tmu2: timer@fff70000 {
+			compatible = "renesas,tmu-r8a7794", "renesas,tmu";
+			reg = <0 0xfff70000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu3: timer@fff80000 {
+			compatible = "renesas,tmu-r8a7794", "renesas,tmu";
+			reg = <0 0xfff80000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
 		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
@@ -506,7 +569,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7794",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -518,11 +581,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
@@ -955,7 +1018,7 @@
 
 		rcar_sound: sound@ec500000 {
 			/*
-			 * #sound-dai-cells is required
+			 * #sound-dai-cells is required if simple-card
 			 *
 			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
 			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
@@ -1291,7 +1354,6 @@
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 			resets = <&cpg 315>;
-			reg-io-width = <4>;
 			status = "disabled";
 		};
 
@@ -1383,6 +1445,7 @@
 		prr: chipid@ff000044 {
 			compatible = "renesas,prr";
 			reg = <0 0xff000044 0 4>;
+			bootph-all;
 		};
 
 		cmt0: timer@ffca0000 {
@@ -1426,6 +1489,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clock - can be overridden by the board */
@@ -1433,5 +1497,6 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
+		bootph-all;
 	};
 };
diff --git a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi b/arch/arm/boot/dts/renesas/r8a77xx-aa121td01-panel.dtsi
index 6e7589ea7562..6e7589ea7562 100644
--- a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a77xx-aa121td01-panel.dtsi
diff --git a/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts
new file mode 100644
index 000000000000..3258b2e27434
--- /dev/null
+++ b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZN1D-DB Board
+ *
+ * Copyright (C) 2018 Renesas Electronics Europe Limited
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/pcs-rzn1-miic.h>
+#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
+
+#include "r9a06g032.dtsi"
+
+/ {
+	model = "RZN1D-DB Board";
+	compatible = "renesas,rzn1d400-db", "renesas,r9a06g032";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	keyboard {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		switch-1 {
+			linux,code = <KEY_1>;
+			label = "SW1-1";
+			debounce-interval = <20>;
+			gpios = <&pca9698 8 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-2 {
+			linux,code = <KEY_2>;
+			label = "SW1-2";
+			debounce-interval = <20>;
+			gpios = <&pca9698 9 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-3 {
+			linux,code = <KEY_3>;
+			label = "SW1-3";
+			debounce-interval = <20>;
+			gpios = <&pca9698 10 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-4 {
+			linux,code = <KEY_4>;
+			label = "SW1-4";
+			debounce-interval = <20>;
+			gpios = <&pca9698 11 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-5 {
+			linux,code = <KEY_5>;
+			label = "SW1-5";
+			debounce-interval = <20>;
+			gpios = <&pca9698 12 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-6 {
+			linux,code = <KEY_6>;
+			label = "SW1-6";
+			debounce-interval = <20>;
+			gpios = <&pca9698 13 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-7 {
+			linux,code = <KEY_7>;
+			label = "SW1-7";
+			debounce-interval = <20>;
+			gpios = <&pca9698 14 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-8 {
+			linux,code = <KEY_8>;
+			label = "SW1-8";
+			debounce-interval = <20>;
+			gpios = <&pca9698 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-dbg0 {
+			gpios = <&pca9698 0 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <0>;
+		};
+
+		led-dbg1 {
+			gpios = <&pca9698 1 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+		};
+
+		led-dbg2 {
+			gpios = <&pca9698 2 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+		};
+
+		led-dbg3 {
+			gpios = <&pca9698 3 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <3>;
+		};
+
+		led-dbg4 {
+			gpios = <&pca9698 4 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <4>;
+		};
+
+		led-dbg5 {
+			gpios = <&pca9698 5 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <5>;
+		};
+
+		led-dbg6 {
+			gpios = <&pca9698 6 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <6>;
+		};
+
+		led-dbg7 {
+			gpios = <&pca9698 7 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <7>;
+		};
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&pins_can0>;
+	pinctrl-names = "default";
+
+	/* Assuming CN10/CN11 are wired for CAN1 */
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&pins_can1>;
+	pinctrl-names = "default";
+
+	/* Please only enable can0 or can1, depending on CN10/CN11 */
+	/* status = "okay"; */
+};
+
+&eth_miic {
+	status = "okay";
+	renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
+};
+
+&ext_rtc_clk {
+	clock-frequency = <32768>;
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "gmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&pins_i2c2>;
+	pinctrl-names = "default";
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pca9698: gpio@20 {
+		compatible = "nxp,pca9698";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		/* configure the analog switch to let i2c2 access the eeprom */
+		max4662-in1-hog {
+			gpio-hog;
+			gpios = <16 0>;
+			output-high;
+		};
+		max4662-in2-hog {
+			gpio-hog;
+			gpios = <17 0>;
+			output-low;
+		};
+		max4662-in3-hog {
+			gpio-hog;
+			gpios = <18 0>;
+			output-low;
+		};
+	};
+
+	/* Some revisions may have a 24cs64 at address 0x58 */
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+};
+
+&mii_conv4 {
+	renesas,miic-input = <MIIC_SWITCH_PORTB>;
+	status = "okay";
+};
+
+&mii_conv5 {
+	renesas,miic-input = <MIIC_SWITCH_PORTA>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_cpld>;
+
+	pins_can0: pins_can0 {
+		pinmux = <RZN1_PINMUX(162, RZN1_FUNC_CAN)>,	/* CAN0_TXD */
+			 <RZN1_PINMUX(163, RZN1_FUNC_CAN)>;	/* CAN0_RXD */
+		drive-strength = <6>;
+	};
+
+	pins_can1: pins_can1 {
+		pinmux = <RZN1_PINMUX(109, RZN1_FUNC_CAN)>,	/* CAN1_TXD */
+			 <RZN1_PINMUX(110, RZN1_FUNC_CAN)>;	/* CAN1_RXD */
+		drive-strength = <6>;
+	};
+
+	pins_cpld: pins-cpld {
+		pinmux = <RZN1_PINMUX(119, RZN1_FUNC_USB)>,
+			 <RZN1_PINMUX(120, RZN1_FUNC_USB)>,
+			 <RZN1_PINMUX(121, RZN1_FUNC_USB)>,
+			 <RZN1_PINMUX(122, RZN1_FUNC_USB)>;
+	};
+
+	pins_eth3: pins_eth3 {
+		pinmux = <RZN1_PINMUX(36, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(37, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(38, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(39, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(40, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(41, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(42, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(43, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(44, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(45, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(46, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(47, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	pins_eth4: pins_eth4 {
+		pinmux = <RZN1_PINMUX(48, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(49, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(50, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(51, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(52, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(53, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(54, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(55, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(56, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(57, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(58, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(59, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	pins_i2c2: pins_i2c2 {
+		pinmux = <RZN1_PINMUX(115, RZN1_FUNC_I2C)>,
+			 <RZN1_PINMUX(116, RZN1_FUNC_I2C)>;
+		drive-strength = <12>;
+	};
+
+	pins_mdio1: pins_mdio1 {
+		pinmux = <RZN1_PINMUX(152, RZN1_FUNC_MDIO1_SWITCH)>,
+			 <RZN1_PINMUX(153, RZN1_FUNC_MDIO1_SWITCH)>;
+	};
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_eth3>, <&pins_eth4>, <&pins_mdio1>;
+
+	dsa,member = <0 0>;
+
+	mdio {
+		clock-frequency = <2500000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch0phy4: ethernet-phy@4 {
+			reg = <4>;
+			micrel,led-mode = <1>;
+		};
+
+		switch0phy5: ethernet-phy@5 {
+			reg = <5>;
+			micrel,led-mode = <1>;
+		};
+	};
+};
+
+&switch_port0 {
+	label = "lan0";
+	phy-mode = "mii";
+	phy-handle = <&switch0phy5>;
+	status = "okay";
+};
+
+&switch_port1 {
+	label = "lan1";
+	phy-mode = "mii";
+	phy-handle = <&switch0phy4>;
+	status = "okay";
+};
+
+&switch_port4 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&udc {
+	status = "okay";
+};
+
+&wdt0 {
+	timeout-sec = <60>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-eb.dts b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-eb.dts
new file mode 100644
index 000000000000..97a339b30d76
--- /dev/null
+++ b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-eb.dts
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZN1D-EB Board
+ *
+ * Copyright (C) 2023 Schneider-Electric
+ *
+ */
+
+#include <dt-bindings/leds/common.h>
+#include "r9a06g032-rzn1d400-db.dts"
+
+/ {
+	model = "RZN1D-EB Board";
+	compatible = "renesas,rzn1d400-eb", "renesas,rzn1d400-db",
+		     "renesas,r9a06g032";
+};
+
+&gmac1 {
+	pinctrl-0 = <&pins_eth0>, <&pins_mdio0>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy_mii0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy_mii0: ethernet-phy@8 {
+			reg = <8>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_ORANGE>;
+					function = LED_FUNCTION_ACTIVITY;
+					default-state = "keep";
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	/* Sensors are different across revisions. All are LM75B compatible */
+	sensor@49 {
+		compatible = "national,lm75b";
+		reg = <0x49>;
+	};
+};
+
+&mii_conv1 {
+	renesas,miic-input = <MIIC_GMAC1_PORT>;
+	status = "okay";
+};
+
+&mii_conv2 {
+	renesas,miic-input = <MIIC_SWITCH_PORTD>;
+	status = "okay";
+};
+
+&mii_conv3 {
+	renesas,miic-input = <MIIC_SWITCH_PORTC>;
+	status = "okay";
+};
+
+&pci_usb {
+	status = "okay";
+};
+
+&pinctrl {
+	pins_eth0: pins-eth0 {
+		pinmux = <RZN1_PINMUX(0, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(1, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(2, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(3, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(4, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(5, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(6, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(7, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(8, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(9, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(10, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(11, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	pins_eth1: pins-eth1 {
+		pinmux = <RZN1_PINMUX(12, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(13, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(14, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(15, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(16, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(17, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(18, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(19, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(20, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(21, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(22, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(23, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	pins_eth2: pins-eth2 {
+		pinmux = <RZN1_PINMUX(24, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(25, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(26, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(27, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(28, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(29, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(30, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(31, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(32, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(33, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(34, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(35, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	pins_mdio0: pins-mdio0 {
+		pinmux = <RZN1_PINMUX(150, RZN1_FUNC_MDIO0_GMAC0)>,
+			 <RZN1_PINMUX(151, RZN1_FUNC_MDIO0_GMAC0)>;
+	};
+
+	pins_sdio1: pins-sdio1 {
+		pinmux = <RZN1_PINMUX(95, RZN1_FUNC_SDIO)>,
+			 <RZN1_PINMUX(97, RZN1_FUNC_SDIO)>,
+			 <RZN1_PINMUX(98, RZN1_FUNC_SDIO)>,
+			 <RZN1_PINMUX(99, RZN1_FUNC_SDIO)>,
+			 <RZN1_PINMUX(100, RZN1_FUNC_SDIO)>,
+			 <RZN1_PINMUX(101, RZN1_FUNC_SDIO_E)>,
+			 <RZN1_PINMUX(102, RZN1_FUNC_SDIO_E)>;
+	};
+
+	pins_sdio1_clk: pins-sdio1-clk {
+		pinmux = <RZN1_PINMUX(96, RZN1_FUNC_SDIO)>;
+		drive-strength = <12>;
+	};
+
+	pins_uart2: pins-uart2 {
+		pinmux = <RZN1_PINMUX(105, RZN1_FUNC_UART2)>,
+			 <RZN1_PINMUX(106, RZN1_FUNC_UART2)>,
+			 <RZN1_PINMUX(107, RZN1_FUNC_UART2)>,
+			 <RZN1_PINMUX(108, RZN1_FUNC_UART2)>;
+		bias-disable;
+	};
+};
+
+&sdio1 {
+	pinctrl-0 = <&pins_sdio1>, <&pins_sdio1_clk>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&switch {
+	pinctrl-0 = <&pins_eth1>, <&pins_eth2>, <&pins_eth3>, <&pins_eth4>,
+		    <&pins_mdio1>;
+
+	mdio {
+		/* CN15 and CN16 switches must be configured in MDIO2 mode */
+		switch0phy1: ethernet-phy@1 {
+			reg = <1>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_ORANGE>;
+					function = LED_FUNCTION_ACTIVITY;
+					default-state = "keep";
+				};
+			};
+		};
+
+		switch0phy10: ethernet-phy@10 {
+			reg = <10>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_ORANGE>;
+					function = LED_FUNCTION_ACTIVITY;
+					default-state = "keep";
+				};
+			};
+		};
+	};
+};
+
+&switch_port2 {
+	label = "lan2";
+	phy-mode = "rgmii-id";
+	phy-handle = <&switch0phy10>;
+	status = "okay";
+};
+
+&switch_port3 {
+	label = "lan3";
+	phy-mode = "rgmii-id";
+	phy-handle = <&switch0phy1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&pins_uart2>;
+	pinctrl-names = "default";
+	status = "okay";
+	uart-has-rtscts;
+};
diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
index 5b97fa85474f..13a60656b044 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
@@ -73,8 +73,8 @@
 				     <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "alarm", "timer", "pps";
-			clocks = <&sysctrl R9A06G032_HCLK_RTC>;
-			clock-names = "hclk";
+			clocks = <&sysctrl R9A06G032_HCLK_RTC>, <&ext_rtc_clk>;
+			clock-names = "hclk", "xtal";
 			power-domains = <&sysctrl>;
 			status = "disabled";
 		};
@@ -117,6 +117,18 @@
 			};
 		};
 
+		udc: usb@4001e000 {
+			compatible = "renesas,r9a06g032-usbf", "renesas,rzn1-usbf";
+			reg = <0x4001e000 0x2000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl R9A06G032_HCLK_USBF>,
+				 <&sysctrl R9A06G032_HCLK_USBPM>;
+			clock-names = "hclkf", "hclkpm";
+			power-domains = <&sysctrl>;
+			status = "disabled";
+		};
+
 		pci_usb: pci@40030000 {
 			compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1";
 			device_type = "pci";
@@ -199,8 +211,8 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas =  <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>;
-			dma-names = "rx", "tx";
+			dmas = <&dmamux 1 0 0 0 1 1>, <&dmamux 0 0 0 0 0 1>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -212,8 +224,8 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas =  <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>;
-			dma-names = "rx", "tx";
+			dmas = <&dmamux 3 0 0 0 3 1>, <&dmamux 2 0 0 0 2 1>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -225,8 +237,8 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas =  <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>;
-			dma-names = "rx", "tx";
+			dmas = <&dmamux 5 0 0 0 5 1>, <&dmamux 4 0 0 0 4 1>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -238,8 +250,8 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas =  <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>;
-			dma-names = "rx", "tx";
+			dmas = <&dmamux 7 0 0 0 7 1>, <&dmamux 6 0 0 0 6 1>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -251,8 +263,30 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas =  <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>;
-			dma-names = "rx", "tx";
+			dmas = <&dmamux 5 0 0 0 21 1>, <&dmamux 4 0 0 0 20 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c1: i2c@40063000 {
+			compatible = "renesas,r9a06g032-i2c", "renesas,rzn1-i2c", "snps,designware-i2c";
+			reg = <0x40063000 0x100>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl R9A06G032_HCLK_I2C0>, <&sysctrl R9A06G032_CLK_I2C0>;
+			clock-names = "ref", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@40064000 {
+			compatible = "renesas,r9a06g032-i2c", "renesas,rzn1-i2c", "snps,designware-i2c";
+			reg = <0x40064000 0x100>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl R9A06G032_HCLK_I2C1>, <&sysctrl R9A06G032_CLK_I2C1>;
+			clock-names = "ref", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -264,6 +298,30 @@
 			status = "okay";
 		};
 
+		sdio1: mmc@40100000 {
+			compatible = "renesas,r9a06g032-sdhci", "renesas,rzn1-sdhci", "arasan,sdhci-8.9a";
+			reg = <0x40100000 0x1000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int", "wakeup";
+			clocks = <&sysctrl R9A06G032_CLK_SDIO0>, <&sysctrl R9A06G032_HCLK_SDIO0>;
+			clock-names = "clk_xin", "clk_ahb";
+			no-1-8-v;
+			status = "disabled";
+		};
+
+		sdio2: mmc@40101000 {
+			compatible = "renesas,r9a06g032-sdhci", "renesas,rzn1-sdhci", "arasan,sdhci-8.9a";
+			reg = <0x40101000 0x1000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int", "wakeup";
+			clocks = <&sysctrl R9A06G032_CLK_SDIO1>, <&sysctrl R9A06G032_HCLK_SDIO1>;
+			clock-names = "clk_xin", "clk_ahb";
+			no-1-8-v;
+			status = "disabled";
+		};
+
 		nand_controller: nand-controller@40102000 {
 			compatible = "renesas,r9a06g032-nandc", "renesas,rzn1-nandc";
 			reg = <0x40102000 0x2000>;
@@ -304,10 +362,27 @@
 			data-width = <8>;
 		};
 
+		gmac1: ethernet@44000000 {
+			compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
+			reg = <0x44000000 0x2000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+			clocks = <&sysctrl R9A06G032_HCLK_GMAC0>;
+			clock-names = "stmmaceth";
+			power-domains = <&sysctrl>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <2048>;
+			rx-fifo-depth = <4096>;
+			pcs-handle = <&mii_conv1>;
+			status = "disabled";
+		};
+
 		gmac2: ethernet@44002000 {
 			compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
 			reg = <0x44002000 0x2000>;
-			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -423,6 +498,26 @@
 			interrupts =
 				<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
+
+		can0: can@52104000 {
+			compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
+			reg = <0x52104000 0x800>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl R9A06G032_HCLK_CAN0>;
+			power-domains = <&sysctrl>;
+			status = "disabled";
+		};
+
+		can1: can@52105000 {
+			compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
+			reg = <0x52105000 0x800>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl R9A06G032_HCLK_CAN1>;
+			power-domains = <&sysctrl>;
+			status = "disabled";
+		};
 	};
 
 	timer {
@@ -435,6 +530,7 @@
 			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	usbphy: usb-phy {
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts
index 98897f710063..1ce07d0878dc 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts
@@ -172,8 +172,7 @@
 		compatible = "smsc,lan9221", "smsc,lan9115";
 		reg = <0x10000000 0x100>;
 		phy-mode = "mii";
-		interrupt-parent = <&irqpin0>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&irqpin0 3 IRQ_TYPE_EDGE_FALLING>;
 		reg-io-width = <4>;
 		smsc,irq-push-pull;
 		smsc,save-mac-address;
@@ -196,8 +195,7 @@
 	compass@c {
 		compatible = "asahi-kasei,ak8975";
 		reg = <0x0c>;
-		interrupt-parent = <&irqpin3>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&irqpin3 4 IRQ_TYPE_EDGE_FALLING>;
 	};
 
 	ak4648: codec@12 {
@@ -209,9 +207,8 @@
 	accelerometer@1d {
 		compatible = "adi,adxl345";
 		reg = <0x1d>;
-		interrupt-parent = <&irqpin3>;
-		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
-			     <3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&irqpin3 2 IRQ_TYPE_LEVEL_HIGH>,
+				      <&irqpin3 3 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	rtc@32 {
@@ -297,8 +294,7 @@
 	touchscreen@55 {
 		compatible = "sitronix,st1232";
 		reg = <0x55>;
-		interrupt-parent = <&irqpin1>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&irqpin1 0 IRQ_TYPE_EDGE_FALLING>;
 	};
 };
 
@@ -310,8 +306,7 @@
 	pcf8575: gpio@20 {
 		compatible = "nxp,pcf8575";
 		reg = <0x20>;
-		interrupt-parent = <&irqpin2>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&irqpin2 3 IRQ_TYPE_EDGE_FALLING>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/renesas/sh73a0.dtsi
index 30c67acc4e35..c7cc17e3c3c5 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/renesas/sh73a0.dtsi
@@ -273,7 +273,6 @@
 			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>;
 		power-domains = <&pd_a3sp>;
-		reg-io-width = <4>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile
new file mode 100644
index 000000000000..716f5540e438
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/Makefile
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+	rv1108-elgin-r1.dtb \
+	rv1108-evb.dtb \
+	rv1109-relfor-saib.dtb \
+	rv1109-sonoff-ihost.dtb \
+	rv1126-edgeble-neu2-io.dtb \
+	rv1126-sonoff-ihost.dtb \
+	rk3036-evb.dtb \
+	rk3036-kylin.dtb \
+	rk3066a-bqcurie2.dtb \
+	rk3066a-marsboard.dtb \
+	rk3066a-mk808.dtb \
+	rk3066a-rayeager.dtb \
+	rk3128-evb.dtb \
+	rk3128-xpi-3128.dtb \
+	rk3188-bqedison2qc.dtb \
+	rk3188-px3-evb.dtb \
+	rk3188-radxarock.dtb \
+	rk3228-evb.dtb \
+	rk3229-evb.dtb \
+	rk3229-xms6.dtb \
+	rk3288-evb-act8846.dtb \
+	rk3288-evb-rk808.dtb \
+	rk3288-firefly-beta.dtb \
+	rk3288-firefly.dtb \
+	rk3288-firefly-reload.dtb \
+	rk3288-miqi.dtb \
+	rk3288-phycore-rdk.dtb \
+	rk3288-popmetal.dtb \
+	rk3288-r89.dtb \
+	rk3288-rock2-square.dtb \
+	rk3288-rock-pi-n8.dtb \
+	rk3288-tinker.dtb \
+	rk3288-tinker-s.dtb \
+	rk3288-veyron-brain.dtb \
+	rk3288-veyron-fievel.dtb \
+	rk3288-veyron-jaq.dtb \
+	rk3288-veyron-jerry.dtb \
+	rk3288-veyron-mickey.dtb \
+	rk3288-veyron-mighty.dtb \
+	rk3288-veyron-minnie.dtb \
+	rk3288-veyron-pinky.dtb \
+	rk3288-veyron-speedy.dtb \
+	rk3288-veyron-tiger.dtb \
+	rk3288-vyasa.dtb
diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rockchip/rk3036-evb.dts
index 2a7e6624efb9..becdc0b664bf 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rockchip/rk3036-evb.dts
@@ -15,27 +15,30 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
 	phy = <&phy0>;
-	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
 	phy-reset-duration = <10>; /* millisecond */
-
+	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
 	status = "okay";
 
-	phy0: ethernet-phy@0 {
-		reg = <0>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
 	};
 };
 
 &i2c1 {
 	status = "okay";
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 };
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
index e817eba8c622..ae2f84a4e922 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
@@ -8,11 +8,32 @@
 	model = "Rockchip RK3036 KylinBoard";
 	compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
 
+	aliases {
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
 	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x20000000>;
 	};
 
+	hdmi_con: hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds: gpio-leds {
 		compatible = "gpio-leds";
 
@@ -65,7 +86,7 @@
 		};
 	};
 
-	vcc_sys: vsys-regulator {
+	vcc_sys: regulator-vsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
 		regulator-min-microvolt = <5000000>;
@@ -80,16 +101,20 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
 	phy = <&phy0>;
-	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
 	phy-reset-duration = <10>; /* millisecond */
-
+	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
 	status = "okay";
 
-	phy0: ethernet-phy@0 {
-		reg = <0>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
 	};
 };
 
@@ -106,6 +131,12 @@
 	status = "okay";
 };
 
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 
@@ -300,8 +331,8 @@
 &i2c2 {
 	status = "okay";
 
-	rt5616: rt5616@1b {
-		compatible = "rt5616";
+	rt5616: audio-codec@1b {
+		compatible = "realtek,rt5616";
 		reg = <0x1b>;
 		clocks = <&cru SCLK_I2S_OUT>;
 		clock-names = "mclk";
@@ -357,6 +388,18 @@
 	status = "okay";
 };
 
+&usb2phy {
+	status = "okay";
+};
+
+&usb2phy_host {
+	status = "okay";
+};
+
+&usb2phy_otg {
+	status = "okay";
+};
+
 &vop {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rockchip/rk3036.dtsi
index 9b0f0497567d..fca21ebb224b 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi
@@ -17,6 +17,9 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -210,6 +213,8 @@
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <275>;
 		g-tx-fifo-size = <256 128 128 64 64 32>;
+		phys = <&usb2phy_otg>;
+		phy-names = "usb2-phy";
 		status = "disabled";
 	};
 
@@ -221,15 +226,15 @@
 		clocks = <&cru HCLK_OTG1>;
 		clock-names = "otg";
 		dr_mode = "host";
+		phys = <&usb2phy_host>;
+		phy-names = "usb2-phy";
 		status = "disabled";
 	};
 
 	emac: ethernet@10200000 {
-		compatible = "rockchip,rk3036-emac", "snps,arc-emac";
+		compatible = "rockchip,rk3036-emac";
 		reg = <0x10200000 0x4000>;
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		rockchip,grf = <&grf>;
 		clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
 		clock-names = "hclk", "macref", "macclk";
@@ -284,7 +289,6 @@
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
-		rockchip,default-sample-phase = <158>;
 		disable-wp;
 		dmas = <&pdma 12>;
 		dma-names = "rx-tx";
@@ -342,6 +346,37 @@
 	grf: syscon@20008000 {
 		compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
 		reg = <0x20008000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		usb2phy: usb2phy@17c {
+			compatible = "rockchip,rk3036-usb2phy";
+			reg = <0x017c 0x20>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy";
+			assigned-clocks = <&cru SCLK_USB480M>;
+			assigned-clock-parents = <&usb2phy>;
+			#clock-cells = <0>;
+			status = "disabled";
+
+			usb2phy_host: host-port {
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			usb2phy_otg: otg-port {
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
 
 		power: power-controller {
 			compatible = "rockchip,rk3036-power-controller";
@@ -384,12 +419,13 @@
 		};
 	};
 
-	acodec: acodec-ana@20030000 {
-		compatible = "rk3036-codec";
+	acodec: audio-codec@20030000 {
+		compatible = "rockchip,rk3036-codec";
 		reg = <0x20030000 0x4000>;
-		rockchip,grf = <&grf>;
 		clock-names = "acodec_pclk";
 		clocks = <&cru PCLK_ACODEC>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -397,19 +433,28 @@
 		compatible = "rockchip,rk3036-inno-hdmi";
 		reg = <0x20034000 0x4000>;
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru  PCLK_HDMI>;
-		clock-names = "pclk";
+		clocks = <&cru PCLK_HDMI>, <&cru SCLK_LCDC>;
+		clock-names = "pclk", "ref";
 		rockchip,grf = <&grf>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmi_ctl>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
-		hdmi_in: port {
+		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			hdmi_in_vop: endpoint@0 {
+
+			hdmi_in: port@0 {
 				reg = <0>;
-				remote-endpoint = <&vop_out_hdmi>;
+
+				hdmi_in_vop: endpoint {
+					remote-endpoint = <&vop_out_hdmi>;
+				};
+			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
 			};
 		};
 	};
@@ -544,11 +589,11 @@
 	};
 
 	spi: spi@20074000 {
-		compatible = "rockchip,rockchip-spi";
+		compatible = "rockchip,rk3036-spi";
 		reg = <0x20074000 0x1000>;
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru PCLK_SPI>, <&cru SCLK_SPI>;
-		clock-names = "apb-pclk","spi_pclk";
+		clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>;
+		clock-names = "spiclk", "apb_pclk";
 		dmas = <&pdma 8>, <&pdma 9>;
 		dma-names = "tx", "rx";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rockchip/rk3066a-bqcurie2.dts
index 962b4d1291db..c227691013ea 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rockchip/rk3066a-bqcurie2.dts
@@ -22,7 +22,7 @@
 		reg = <0x60000000 0x40000000>;
 	};
 
-	vdd_log: vdd-log {
+	vdd_log: regulator-vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm3 0 1000>;
 		regulator-name = "vdd_log";
@@ -34,7 +34,7 @@
 		status = "okay";
 	};
 
-	vcc_sd0: fixed-regulator {
+	vcc_sd0: regulator-fixed {
 		compatible = "regulator-fixed";
 		regulator-name = "sdmmc-supply";
 		regulator-min-microvolt = <3000000>;
@@ -159,7 +159,7 @@
 };
 
 /* must be included after &tps gets defined */
-#include "tps65910.dtsi"
+#include "../tps65910.dtsi"
 
 &mmc0 { /* sdmmc */
 	status = "okay";
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts
index a66d915aa0f6..de42d1855121 100644
--- a/arch/arm/boot/dts/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts
@@ -19,7 +19,18 @@
 		reg = <0x60000000 0x40000000>;
 	};
 
-	vdd_log: vdd-log {
+	hdmi_con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vdd_log: regulator-vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm3 0 1000>;
 		regulator-name = "vdd_log";
@@ -31,7 +42,7 @@
 		status = "okay";
 	};
 
-	vcc_sd0: sdmmc-regulator {
+	vcc_sd0: regulator-sdmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "sdmmc-supply";
 		regulator-min-microvolt = <3000000>;
@@ -41,7 +52,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vsys: vsys-regulator {
+	vsys: regulator-vsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vsys";
 		regulator-min-microvolt = <5000000>;
@@ -58,6 +69,28 @@
 	cpu-supply = <&vdd_arm>;
 };
 
+&gpu {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in_vop1 {
+	status = "disabled";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
 &i2c1 {
 	status = "okay";
 	clock-frequency = <400000>;
@@ -147,21 +180,24 @@
 };
 
 /* must be included after &tps gets defined */
-#include "tps65910.dtsi"
+#include "../tps65910.dtsi"
 
 &emac {
-	status = "okay";
-
 	phy = <&phy0>;
 	phy-supply = <&vcc_rmii>;
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+	status = "okay";
 
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+		};
 	};
 };
 
@@ -213,6 +249,10 @@
 	status = "okay";
 };
 
+&vop0 {
+	status = "okay";
+};
+
 &wdt {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rockchip/rk3066a-mk808.dts
index cfa318a506eb..25c0bcf85a56 100644
--- a/arch/arm/boot/dts/rk3066a-mk808.dts
+++ b/arch/arm/boot/dts/rockchip/rk3066a-mk808.dts
@@ -32,7 +32,7 @@
 		keyup-threshold-microvolt = <2500000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <0>;
@@ -61,21 +61,21 @@
 		};
 	};
 
-	vcc_2v5: vcc-2v5 {
+	vcc_2v5: regulator-vcc-2v5 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_2v5";
 		regulator-min-microvolt = <2500000>;
 		regulator-max-microvolt = <2500000>;
 	};
 
-	vcc_io: vcc-io {
+	vcc_io: regulator-vcc-io {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_io";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_host: usb-host-regulator {
+	vcc_host: regulator-usb-host {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
@@ -89,7 +89,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vcc_otg: usb-otg-regulator {
+	vcc_otg: regulator-usb-otg {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
@@ -103,7 +103,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vcc_sd: sdmmc-regulator {
+	vcc_sd: regulator-sdmmc {
 		compatible = "regulator-fixed";
 		gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
 		pinctrl-0 = <&sdmmc_pwr>;
@@ -115,7 +115,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vcc_wifi: sdio-regulator {
+	vcc_wifi: regulator-sdio {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;
@@ -143,6 +143,14 @@
 	};
 };
 
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2s0 {
+	status = "okay";
+};
+
 &mmc0 {
 	bus-width = <4>;
 	cap-mmc-highspeed;
@@ -157,7 +165,14 @@
 	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
 	pinctrl-names = "default";
 	vmmc-supply = <&vcc_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
 };
 
 &nfc {
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts
index dbbc5170094e..b0b029f14643 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts
@@ -42,7 +42,7 @@
 		};
 	};
 
-	vdd_log: vdd-log {
+	vdd_log: regulator-vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm3 0 1000>;
 		regulator-name = "vdd_log";
@@ -54,7 +54,7 @@
 		status = "okay";
 	};
 
-	vsys: vsys-regulator {
+	vsys: regulator-vsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vsys";
 		regulator-min-microvolt = <5000000>;
@@ -64,7 +64,7 @@
 	};
 
 	/* input for 5V_STDBY is VSYS or DC5V, selectable by jumper J4 */
-	vcc_stdby: stdby-regulator {
+	vcc_stdby: regulator-stdby {
 		compatible = "regulator-fixed";
 		regulator-name = "5v_stdby";
 		regulator-min-microvolt = <5000000>;
@@ -73,7 +73,7 @@
 		regulator-boot-on;
 	};
 
-	vcc_emmc: emmc-regulator {
+	vcc_emmc: regulator-emmc {
 		compatible = "regulator-fixed";
 		regulator-name = "emmc_vccq";
 		regulator-min-microvolt = <3000000>;
@@ -81,7 +81,7 @@
 		vin-supply = <&vsys>;
 	};
 
-	vcc_sata: sata-regulator {
+	vcc_sata: regulator-sata {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
@@ -94,7 +94,7 @@
 		vin-supply = <&vcc_stdby>;
 	};
 
-	vcc_sd: sdmmc-regulator {
+	vcc_sd: regulator-sdmmc {
 		compatible = "regulator-fixed";
 		gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
@@ -106,7 +106,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vcc_host: usb-host-regulator {
+	vcc_host: regulator-usb-host {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
@@ -119,7 +119,7 @@
 		vin-supply = <&vcc_stdby>;
 	};
 
-	vcc_otg: usb-otg-regulator {
+	vcc_otg: regulator-usb-otg {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
@@ -142,15 +142,20 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
 	phy = <&phy0>;
 	phy-supply = <&vcc_rmii>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
 	status = "okay";
 
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
+		};
 	};
 };
 
@@ -291,7 +296,7 @@
 	};
 };
 
-#include "tps65910.dtsi"
+#include "../tps65910.dtsi"
 
 &i2c2 {
 	status = "okay";
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rockchip/rk3066a.dtsi
index de9915d946f7..3f6d49459734 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3066a.dtsi
@@ -13,6 +13,11 @@
 / {
 	compatible = "rockchip,rk3066a";
 
+	aliases {
+		gpio4 = &gpio4;
+		gpio6 = &gpio6;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -48,6 +53,22 @@
 		ports = <&vop0_out>, <&vop1_out>;
 	};
 
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "HDMI";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		status = "disabled";
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0>;
+		};
+	};
+
 	sram: sram@10080000 {
 		compatible = "mmio-sram";
 		reg = <0x10080000 0x10000>;
@@ -123,6 +144,7 @@
 		pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
 		power-domains = <&power RK3066_PD_VIO>;
 		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
@@ -874,7 +896,3 @@
 &wdt {
 	compatible = "rockchip,rk3066-wdt", "snps,dw-wdt";
 };
-
-&emac {
-	compatible = "rockchip,rk3066-emac";
-};
diff --git a/arch/arm/boot/dts/rockchip/rk3128-evb.dts b/arch/arm/boot/dts/rockchip/rk3128-evb.dts
new file mode 100644
index 000000000000..3d27d921de76
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rk3128-evb.dts
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+
+#include "rk3128.dtsi"
+
+/ {
+	model = "Rockchip RK3128 Evaluation board";
+	compatible = "rockchip,rk3128-evb", "rockchip,rk3128";
+
+	aliases {
+		mmc0 = &emmc;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	vcc5v0_otg: regulator-vcc5v0-otg {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc5v0_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&usb2phy {
+	status = "okay";
+};
+
+&usb2phy_host {
+	status = "okay";
+};
+
+&usb2phy_otg {
+	status = "okay";
+};
+
+&usb_host_ehci {
+	status = "okay";
+};
+
+&usb_host_ohci {
+	status = "okay";
+};
+
+&usb_otg {
+	vbus-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb-host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <2 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
new file mode 100644
index 000000000000..decbf2726ec4
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
@@ -0,0 +1,454 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3128.dtsi"
+
+/ {
+	model = "Geniatech XPI-3128";
+	compatible = "geniatech,xpi-3128", "rockchip,rk3128";
+
+	aliases {
+		ethernet0 = &gmac;
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <3300000>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	dc_5v: regulator-dc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	hdmi-connnector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_connector_out>;
+			};
+		};
+	};
+
+	/*
+	 * This is a vbus-supply, which also supplies the GL852G usb hub,
+	 * thus has to be always-on
+	 */
+	host_pwr_5v: regulator-host-pwr-5v {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <1500>;
+		regulator-name = "HOST_PWR_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_5v>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_drv>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&power_led>;
+		};
+
+		led-spd {
+			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			/*
+			 * currently not allowed to be set as per
+			 * https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/common.yaml
+			 * and needs to set in userspace:
+			 *
+			 * linux,default-trigger = "netdev";
+			 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&spd_led>;
+		};
+	};
+
+	mcu3v3: regulator-mcu3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MCU3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_ddr: regulator-vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_DDR";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_io: regulator-vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_IO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_lan: regulator-vcc-lan {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_LAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd: regulator-vcc-sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <500>;
+		regulator-name = "VCC_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwren>;
+	};
+
+	vcc_sys: regulator-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_5v>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc33_hdmi: regulator-vcc33-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC33_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcca_33>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcca_33: regulator-vcca-33 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCA_33";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_11: regulator-vdd-11 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_11";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd11_hdmi: regulator-vdd11-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD11_HDMI";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vdd_11>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_arm: regulator-vdd-arm {
+		compatible = "pwm-regulator";
+		regulator-name = "VDD_ARM";
+		pwms = <&pwm1 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * As per schematics vdd_log is minimum 900 mV, maximum 1400 mV.
+	 * Since there are HW blocks in PD_LOGIC (which are all driven by
+	 * this supply), that either do not have a driver at all or the
+	 * driver does not implement regulator support we have to make
+	 * sure here that the voltage never drops below 1050 mV.
+	 */
+	vdd_log: regulator-vdd-log {
+		compatible = "pwm-regulator";
+		regulator-name = "VDD_LOG";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-dutycycle-range = <30 100>;
+		pwm-supply = <&vcc_sys>;
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-ramp-delay = <4000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&emmc {
+	bus-width = <8>;
+	vmmc-supply = <&vcc_io>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	cap-mmc-highspeed;
+	mmc-ddr-3_3v;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&gmac {
+	clock_in_out = "output";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
+	assigned-clocks = <&cru SCLK_MAC_SRC>;
+	assigned-clock-rates = <50000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names = /* GPIO0 A0-A7 */
+			  "", "", "HEADER_5", "HEADER_3",
+			  "", "", "", "",
+			  /* GPIO0 B0-B7 */
+			  "HEADER_22", "HEADER_23", "", "HEADER_19",
+			  "HEADER_26", "HEADER_21", "HEADER_24", "",
+			  /* GPIO0 C0-C7 */
+			  "", "HEADER_18", "", "",
+			  "", "", "", "",
+			  /* GPIO0 D0-D7 */
+			  "HEADER_36", "", "", "",
+			  "", "", "HEADER_13", "";
+};
+
+&gpio1 {
+	gpio-line-names = /* GPIO1 A0-A7 */
+			  "HEADER_7", "HEADER_35", "HEADER_33", "HEADER_37",
+			  "HEADER_40", "HEADER_38", "", "",
+			  /* GPIO1 B0-B7 */
+			  "HEADER_11", "", "", "HEADER_29",
+			  "HEADER_31", "", "", "",
+			  /* GPIO1 C0-C7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO1 D0-D7 */
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names = /* GPIO2 A0-A7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO2 B0-B7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO2 C0-C7 */
+			  "", "", "", "",
+			  "HEADER_27", "", "", "",
+			  /* GPIO2 D0-D7 */
+			  "", "", "HEADER_8", "HEADER_10",
+			  "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names = /* GPIO3 A0-A7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO3 B0-B7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO3 C0-C7 */
+			  "", "HEADER_32", "", "",
+			  "", "", "", "HEADER_12",
+			  /* GPIO3 D0-D7 */
+			  "", "", "", "HEADER_15",
+			  "", "", "", "";
+};
+
+&gpu {
+	mali-supply = <&vdd_log>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_connector_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		max-speed = <100>;
+		/* T2.2.4 min. 1 us */
+		reset-assert-us = <10>;
+		/* T2.2.1 + T2.2.2 + T2.2.3 min. 6.05 us */
+		reset-deassert-us = <20>;
+		reset-gpios = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp83848c_rst>;
+	};
+};
+
+&pinctrl {
+	dp83848c {
+		dp83848c_rst: dp83848c-rst {
+			rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ir-receiver {
+		ir_int: ir-int {
+			rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		power_led: power-led {
+			rockchip,pins = <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		spd_led: spd-led {
+			rockchip,pins = <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb2 {
+		host_drv: host-drv {
+			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	vmmc-supply = <&vcc_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
+	disable-wp;
+	cap-sd-highspeed;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb_host_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	vusb_a-supply = <&vcc_io>;
+	vusb_d-supply = <&vdd_11>;
+	status = "okay";
+};
+
+&usb2phy {
+	status = "okay";
+};
+
+&usb2phy_host {
+	status = "okay";
+};
+
+&usb2phy_otg {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi
new file mode 100644
index 000000000000..c49099954c28
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi
@@ -0,0 +1,1374 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/clock/rk3128-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3128-power.h>
+
+/ {
+	compatible = "rockchip,rk3128";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "rockchip,rk3036-smp";
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			clocks = <&cru ARMCLK>;
+			resets = <&cru SRST_CORE0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			resets = <&cru SRST_CORE1>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+
+		cpu2: cpu@f02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			resets = <&cru SRST_CORE2>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+
+		cpu3: cpu@f03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			resets = <&cru SRST_CORE3>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+	};
+
+	cpu_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-216000000 {
+			opp-hz = /bits/ 64 <216000000>;
+			opp-microvolt = <950000 950000 1325000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <950000 950000 1325000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <950000 950000 1325000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-696000000 {
+			opp-hz = /bits/ 64 <696000000>;
+			opp-microvolt = <975000 975000 1325000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1075000 1075000 1325000>;
+			opp-suspend;
+			clock-latency-ns = <40000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000 1200000 1325000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1325000 1325000 1325000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+		status = "disabled";
+	};
+
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <975000 975000 1250000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1050000 1050000 1250000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1150000 1150000 1250000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <1250000 1250000 1250000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		arm,cpu-registers-not-fw-configured;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	imem: sram@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x10080000 0x2000>;
+
+		smp-sram@0 {
+			compatible = "rockchip,rk3066-smp-sram";
+			reg = <0x00 0x10>;
+		};
+	};
+
+	gpu: gpu@10090000 {
+		compatible = "rockchip,rk3128-mali", "arm,mali-400";
+		reg = <0x10090000 0x10000>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp",
+				  "gpmmu",
+				  "pp0",
+				  "ppmmu0",
+				  "pp1",
+				  "ppmmu1";
+		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
+		clock-names = "bus", "core";
+		operating-points-v2 = <&gpu_opp_table>;
+		resets = <&cru SRST_GPU>;
+		power-domains = <&power RK3128_PD_GPU>;
+		status = "disabled";
+	};
+
+	pmu: syscon@100a0000 {
+		compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd";
+		reg = <0x100a0000 0x1000>;
+
+		power: power-controller {
+			compatible = "rockchip,rk3128-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-domain@RK3128_PD_VIO {
+				reg = <RK3128_PD_VIO>;
+				clocks = <&cru ACLK_CIF>,
+					 <&cru HCLK_CIF>,
+					 <&cru DCLK_EBC>,
+					 <&cru HCLK_EBC>,
+					 <&cru ACLK_IEP>,
+					 <&cru HCLK_IEP>,
+					 <&cru ACLK_LCDC0>,
+					 <&cru HCLK_LCDC0>,
+					 <&cru PCLK_MIPI>,
+					 <&cru PCLK_MIPIPHY>,
+					 <&cru SCLK_MIPI_24M>,
+					 <&cru ACLK_RGA>,
+					 <&cru HCLK_RGA>,
+					 <&cru ACLK_VIO0>,
+					 <&cru ACLK_VIO1>,
+					 <&cru HCLK_VIO>,
+					 <&cru HCLK_VIO_H2P>,
+					 <&cru DCLK_VOP>,
+					 <&cru SCLK_VOP>;
+				pm_qos = <&qos_ebc>,
+					 <&qos_iep>,
+					 <&qos_lcdc>,
+					 <&qos_rga>,
+					 <&qos_vip>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3128_PD_VIDEO {
+				reg = <RK3128_PD_VIDEO>;
+				clocks = <&cru ACLK_VDPU>,
+					 <&cru HCLK_VDPU>,
+					 <&cru ACLK_VEPU>,
+					 <&cru HCLK_VEPU>,
+					 <&cru SCLK_HEVC_CORE>;
+				pm_qos = <&qos_vpu>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3128_PD_GPU {
+				reg = <RK3128_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+				pm_qos = <&qos_gpu>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	vpu: video-codec@10106000 {
+		compatible = "rockchip,rk3128-vpu", "rockchip,rk3066-vpu";
+		reg = <0x10106000 0x800>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vepu", "vdpu";
+		clocks = <&cru ACLK_VDPU>, <&cru HCLK_VDPU>,
+			 <&cru ACLK_VEPU>, <&cru HCLK_VEPU>;
+		clock-names = "aclk_vdpu", "hclk_vdpu",
+			      "aclk_vepu", "hclk_vepu";
+		iommus = <&vpu_mmu>;
+		power-domains = <&power RK3128_PD_VIDEO>;
+	};
+
+	vpu_mmu: iommu@10106800 {
+		compatible = "rockchip,iommu";
+		reg = <0x10106800 0x100>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VEPU>, <&cru HCLK_VDPU>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3128_PD_VIDEO>;
+		#iommu-cells = <0>;
+	};
+
+	vop: vop@1010e000 {
+		compatible = "rockchip,rk3126-vop";
+		reg = <0x1010e000 0x300>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC0>, <&cru DCLK_VOP>,
+			 <&cru HCLK_LCDC0>;
+		clock-names = "aclk_vop", "dclk_vop",
+			      "hclk_vop";
+		resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>,
+			 <&cru SRST_VOP_D>;
+		reset-names = "axi", "ahb",
+			      "dclk";
+		power-domains = <&power RK3128_PD_VIO>;
+		status = "disabled";
+
+		vop_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vop_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vop>;
+			};
+
+			vop_out_dsi: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dsi_in_vop>;
+			};
+		};
+	};
+
+	dsi: dsi@10110000 {
+		compatible = "rockchip,rk3128-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x10110000 0x4000>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_MIPI>;
+		clock-names = "pclk";
+		phys = <&dphy>;
+		phy-names = "dphy";
+		power-domains = <&power RK3128_PD_VIO>;
+		resets = <&cru SRST_VIO_MIPI_DSI>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi_in: port@0 {
+				reg = <0>;
+
+				dsi_in_vop: endpoint {
+					remote-endpoint = <&vop_out_dsi>;
+				};
+			};
+
+			dsi_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	qos_gpu: qos@1012d000 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012d000 0x20>;
+	};
+
+	qos_vpu: qos@1012e000 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012e000 0x20>;
+	};
+
+	qos_rga: qos@1012f000 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f000 0x20>;
+	};
+
+	qos_ebc: qos@1012f080 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f080 0x20>;
+	};
+
+	qos_iep: qos@1012f100 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f100 0x20>;
+	};
+
+	qos_lcdc: qos@1012f180 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f180 0x20>;
+	};
+
+	qos_vip: qos@1012f200 {
+		compatible = "rockchip,rk3128-qos", "syscon";
+		reg = <0x1012f200 0x20>;
+	};
+
+	gic: interrupt-controller@10139000 {
+		compatible = "arm,cortex-a7-gic";
+		reg = <0x10139000 0x1000>,
+		      <0x1013a000 0x1000>,
+		      <0x1013c000 0x2000>,
+		      <0x1013e000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+	};
+
+	usb_otg: usb@10180000 {
+		compatible = "rockchip,rk3128-usb", "rockchip,rk3066-usb", "snps,dwc2";
+		reg = <0x10180000 0x40000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
+		phys = <&usb2phy_otg>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usb_host_ehci: usb@101c0000 {
+		compatible = "generic-ehci";
+		reg = <0x101c0000 0x20000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST2>;
+		phys = <&usb2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host_ohci: usb@101e0000 {
+		compatible = "generic-ohci";
+		reg = <0x101e0000 0x20000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST2>;
+		phys = <&usb2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	i2s_8ch: i2s@10200000 {
+		compatible = "rockchip,rk3128-i2s", "rockchip,rk3066-i2s";
+		reg = <0x10200000 0x1000>;
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S_8CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&pdma 14>, <&pdma 15>;
+		dma-names = "tx", "rx";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	spdif: spdif@10204000 {
+		compatible = "rockchip,rk3128-spdif", "rockchip,rk3066-spdif";
+		reg = <0x10204000 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>;
+		clock-names = "mclk", "hclk";
+		dmas = <&pdma 13>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_tx>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	sfc: spi@1020c000 {
+		compatible = "rockchip,sfc";
+		reg = <0x1020c000 0x8000>;
+		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		status = "disabled";
+	};
+
+	sdmmc: mmc@10214000 {
+		compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x10214000 0x4000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		dmas = <&pdma 10>;
+		dma-names = "rx-tx";
+		fifo-depth = <256>;
+		max-frequency = <150000000>;
+		resets = <&cru SRST_SDMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sdio: mmc@10218000 {
+		compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x10218000 0x4000>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		dmas = <&pdma 11>;
+		dma-names = "rx-tx";
+		fifo-depth = <256>;
+		max-frequency = <150000000>;
+		resets = <&cru SRST_SDIO>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	emmc: mmc@1021c000 {
+		compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x1021c000 0x4000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		dmas = <&pdma 12>;
+		dma-names = "rx-tx";
+		fifo-depth = <256>;
+		max-frequency = <150000000>;
+		resets = <&cru SRST_EMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	i2s_2ch: i2s@10220000 {
+		compatible = "rockchip,rk3128-i2s", "rockchip,rk3066-i2s";
+		reg = <0x10220000 0x1000>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S_2CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&pdma 0>, <&pdma 1>;
+		dma-names = "tx", "rx";
+		rockchip,playback-channels = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s_bus>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	nfc: nand-controller@10500000 {
+		compatible = "rockchip,rk3128-nfc", "rockchip,rk2928-nfc";
+		reg = <0x10500000 0x4000>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+		clock-names = "ahb", "nfc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_cs0
+			     &flash_dqs &flash_rdn &flash_rdy &flash_wrn>;
+		status = "disabled";
+	};
+
+	cru: clock-controller@20000000 {
+		compatible = "rockchip,rk3128-cru";
+		reg = <0x20000000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>;
+		assigned-clock-rates = <594000000>;
+	};
+
+	grf: syscon@20008000 {
+		compatible = "rockchip,rk3128-grf", "syscon", "simple-mfd";
+		reg = <0x20008000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		usb2phy: usb2phy@17c {
+			compatible = "rockchip,rk3128-usb2phy";
+			reg = <0x017c 0x0c>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy";
+			assigned-clocks = <&cru SCLK_USB480M>;
+			assigned-clock-parents = <&usb2phy>;
+			#clock-cells = <0>;
+			status = "disabled";
+
+			usb2phy_host: host-port {
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			usb2phy_otg: otg-port {
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	hdmi: hdmi@20034000 {
+		compatible = "rockchip,rk3128-inno-hdmi";
+		reg = <0x20034000 0x4000>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_HDMI>, <&cru DCLK_VOP>;
+		clock-names = "pclk", "ref";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>;
+		power-domains = <&power RK3128_PD_VIO>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+				hdmi_in_vop: endpoint {
+					remote-endpoint = <&vop_out_hdmi>;
+				};
+			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	dphy: phy@20038000 {
+		compatible = "rockchip,rk3128-dsi-dphy";
+		reg = <0x20038000 0x4000>;
+		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPIPHY>;
+		clock-names = "ref", "pclk";
+		#phy-cells = <0>;
+		power-domains = <&power RK3128_PD_VIO>;
+		resets = <&cru SRST_MIPIPHY_P>;
+		reset-names = "apb";
+		status = "disabled";
+	};
+
+	timer0: timer@20044000 {
+		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
+		reg = <0x20044000 0x20>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>;
+		clock-names = "pclk", "timer";
+	};
+
+	timer1: timer@20044020 {
+		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
+		reg = <0x20044020 0x20>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER1>;
+		clock-names = "pclk", "timer";
+	};
+
+	timer2: timer@20044040 {
+		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
+		reg = <0x20044040 0x20>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER2>;
+		clock-names = "pclk", "timer";
+	};
+
+	timer3: timer@20044060 {
+		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
+		reg = <0x20044060 0x20>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER3>;
+		clock-names = "pclk", "timer";
+	};
+
+	timer4: timer@20044080 {
+		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
+		reg = <0x20044080 0x20>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER4>;
+		clock-names = "pclk", "timer";
+	};
+
+	timer5: timer@200440a0 {
+		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
+		reg = <0x200440a0 0x20>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER5>;
+		clock-names = "pclk", "timer";
+	};
+
+	watchdog: watchdog@2004c000 {
+		compatible = "rockchip,rk3128-wdt", "snps,dw-wdt";
+		reg = <0x2004c000 0x100>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_WDT>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@20050000 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050000 0x10>;
+		clocks = <&cru PCLK_PWM>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@20050010 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050010 0x10>;
+		clocks = <&cru PCLK_PWM>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@20050020 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050020 0x10>;
+		clocks = <&cru PCLK_PWM>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@20050030 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050030 0x10>;
+		clocks = <&cru PCLK_PWM>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@20056000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <0x20056000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@2005a000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <0x2005a000 0x1000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@2005e000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <0x2005e000 0x1000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart0: serial@20060000 {
+		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+		reg = <0x20060000 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&pdma 2>, <&pdma 3>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart1: serial@20064000 {
+		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+		reg = <0x20064000 0x100>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&pdma 4>, <&pdma 5>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart2: serial@20068000 {
+		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+		reg = <0x20068000 0x100>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&pdma 6>, <&pdma 7>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	saradc: saradc@2006c000 {
+		compatible = "rockchip,saradc";
+		reg = <0x2006c000 0x100>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
+		#io-channel-cells = <1>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@20072000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <0x20072000 0x1000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi0: spi@20074000 {
+		compatible = "rockchip,rk3128-spi", "rockchip,rk3066-spi";
+		reg = <0x20074000 0x1000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&pdma 8>, <&pdma 9>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_tx &spi0_rx &spi0_clk &spi0_cs0 &spi0_cs1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	pdma: dma-controller@20078000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x20078000 0x4000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		arm,pl330-broken-no-flushp;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	gmac: ethernet@2008c000 {
+		compatible = "rockchip,rk3128-gmac";
+		reg = <0x2008c000 0x4000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		clocks = <&cru SCLK_MAC>,
+			 <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+			 <&cru SCLK_MAC_REF>, <&cru SCLK_MAC_REFOUT>,
+			 <&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth",
+			      "mac_clk_rx", "mac_clk_tx",
+			      "clk_mac_ref", "clk_mac_refout",
+			      "aclk_mac", "pclk_mac";
+		resets = <&cru SRST_GMAC>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		rx-fifo-depth = <4096>;
+		tx-fifo-depth = <2048>;
+		status = "disabled";
+
+		mdio: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+		};
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3128-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio@2007c000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2007c000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@20080000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20080000 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@20084000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20084000 0x100>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@20088000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20088000 0x100>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_default: pcfg-pull-default {
+			bias-pull-pin-default;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 RK_PA7 2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <1 RK_PC6 2 &pcfg_pull_default>;
+			};
+
+			emmc_cmd1: emmc-cmd1 {
+				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_default>;
+			};
+
+			emmc_pwr: emmc-pwr {
+				rockchip,pins = <2 RK_PA5 2 &pcfg_pull_default>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>,
+						<1 RK_PD1 2 &pcfg_pull_default>,
+						<1 RK_PD2 2 &pcfg_pull_default>,
+						<1 RK_PD3 2 &pcfg_pull_default>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>,
+						<1 RK_PD1 2 &pcfg_pull_default>,
+						<1 RK_PD2 2 &pcfg_pull_default>,
+						<1 RK_PD3 2 &pcfg_pull_default>,
+						<1 RK_PD4 2 &pcfg_pull_default>,
+						<1 RK_PD5 2 &pcfg_pull_default>,
+						<1 RK_PD6 2 &pcfg_pull_default>,
+						<1 RK_PD7 2 &pcfg_pull_default>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins = <2 RK_PB0 3 &pcfg_pull_default>,
+						<2 RK_PB1 3 &pcfg_pull_default>,
+						<2 RK_PB3 3 &pcfg_pull_default>,
+						<2 RK_PB4 3 &pcfg_pull_default>,
+						<2 RK_PB5 3 &pcfg_pull_default>,
+						<2 RK_PB6 3 &pcfg_pull_default>,
+						<2 RK_PC0 3 &pcfg_pull_default>,
+						<2 RK_PC1 3 &pcfg_pull_default>,
+						<2 RK_PC2 3 &pcfg_pull_default>,
+						<2 RK_PC3 3 &pcfg_pull_default>,
+						<2 RK_PD1 3 &pcfg_pull_default>,
+						<2 RK_PC4 4 &pcfg_pull_default>,
+						<2 RK_PC5 4 &pcfg_pull_default>,
+						<2 RK_PC6 4 &pcfg_pull_default>,
+						<2 RK_PC7 4 &pcfg_pull_default>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins = <2 RK_PB0 3 &pcfg_pull_default>,
+						<2 RK_PB4 3 &pcfg_pull_default>,
+						<2 RK_PB5 3 &pcfg_pull_default>,
+						<2 RK_PB6 3 &pcfg_pull_default>,
+						<2 RK_PB7 3 &pcfg_pull_default>,
+						<2 RK_PC0 3 &pcfg_pull_default>,
+						<2 RK_PC1 3 &pcfg_pull_default>,
+						<2 RK_PC2 3 &pcfg_pull_default>,
+						<2 RK_PC3 3 &pcfg_pull_default>,
+						<2 RK_PD1 3 &pcfg_pull_default>;
+			};
+		};
+
+		hdmi {
+			hdmii2c_xfer: hdmii2c-xfer {
+				rockchip,pins = <0 RK_PA6 2 &pcfg_pull_none>,
+						<0 RK_PA7 2 &pcfg_pull_none>;
+			};
+
+			hdmi_hpd: hdmi-hpd {
+				rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			hdmi_cec: hdmi-cec {
+				rockchip,pins = <0 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>,
+						<0 RK_PA1 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>,
+						<0 RK_PA3 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <2 RK_PC4 3 &pcfg_pull_none>,
+						<2 RK_PC5 3 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>,
+						<0 RK_PA7 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s {
+			i2s_bus: i2s-bus {
+				rockchip,pins = <0 RK_PB0 1 &pcfg_pull_none>,
+						<0 RK_PB1 1 &pcfg_pull_none>,
+						<0 RK_PB3 1 &pcfg_pull_none>,
+						<0 RK_PB4 1 &pcfg_pull_none>,
+						<0 RK_PB5 1 &pcfg_pull_none>,
+						<0 RK_PB6 1 &pcfg_pull_none>;
+			};
+
+			i2s1_bus: i2s1-bus {
+				rockchip,pins = <1 RK_PA0 1 &pcfg_pull_none>,
+						<1 RK_PA1 1 &pcfg_pull_none>,
+						<1 RK_PA2 1 &pcfg_pull_none>,
+						<1 RK_PA3 1 &pcfg_pull_none>,
+						<1 RK_PA4 1 &pcfg_pull_none>,
+						<1 RK_PA5 1 &pcfg_pull_none>;
+			};
+		};
+
+		lcdc {
+			lcdc_dclk: lcdc-dclk {
+				rockchip,pins = <2 RK_PB0 1 &pcfg_pull_none>;
+			};
+
+			lcdc_den: lcdc-den {
+				rockchip,pins = <2 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			lcdc_hsync: lcdc-hsync {
+				rockchip,pins = <2 RK_PB1 1 &pcfg_pull_none>;
+			};
+
+			lcdc_vsync: lcdc-vsync {
+				rockchip,pins = <2 RK_PB2 1 &pcfg_pull_none>;
+			};
+
+			lcdc_rgb24: lcdc-rgb24 {
+				rockchip,pins = <2 RK_PB4 1 &pcfg_pull_none>,
+						<2 RK_PB5 1 &pcfg_pull_none>,
+						<2 RK_PB6 1 &pcfg_pull_none>,
+						<2 RK_PB7 1 &pcfg_pull_none>,
+						<2 RK_PC0 1 &pcfg_pull_none>,
+						<2 RK_PC1 1 &pcfg_pull_none>,
+						<2 RK_PC2 1 &pcfg_pull_none>,
+						<2 RK_PC3 1 &pcfg_pull_none>,
+						<2 RK_PC4 1 &pcfg_pull_none>,
+						<2 RK_PC5 1 &pcfg_pull_none>,
+						<2 RK_PC6 1 &pcfg_pull_none>,
+						<2 RK_PC7 1 &pcfg_pull_none>,
+						<2 RK_PD0 1 &pcfg_pull_none>,
+						<2 RK_PD1 1 &pcfg_pull_none>;
+			};
+		};
+
+		nfc {
+			flash_ale: flash-ale {
+				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>;
+			};
+
+			flash_cle: flash-cle {
+				rockchip,pins = <2 RK_PA1 1 &pcfg_pull_none>;
+			};
+
+			flash_wrn: flash-wrn {
+				rockchip,pins = <2 RK_PA2 1 &pcfg_pull_none>;
+			};
+
+			flash_rdn: flash-rdn {
+				rockchip,pins = <2 RK_PA3 1 &pcfg_pull_none>;
+			};
+
+			flash_rdy: flash-rdy {
+				rockchip,pins = <2 RK_PA4 1 &pcfg_pull_none>;
+			};
+
+			flash_cs0: flash-cs0 {
+				rockchip,pins = <2 RK_PA6 1 &pcfg_pull_none>;
+			};
+
+			flash_dqs: flash-dqs {
+				rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>;
+			};
+
+			flash_bus8: flash-bus8 {
+				rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>,
+						<1 RK_PD1 1 &pcfg_pull_none>,
+						<1 RK_PD2 1 &pcfg_pull_none>,
+						<1 RK_PD3 1 &pcfg_pull_none>,
+						<1 RK_PD4 1 &pcfg_pull_none>,
+						<1 RK_PD5 1 &pcfg_pull_none>,
+						<1 RK_PD6 1 &pcfg_pull_none>,
+						<1 RK_PD7 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <0 RK_PD2 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <0 RK_PD4 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <3 RK_PD2 1 &pcfg_pull_none>;
+			};
+		};
+
+		sdio {
+			sdio_clk: sdio-clk {
+				rockchip,pins = <1 RK_PA0 2 &pcfg_pull_none>;
+			};
+
+			sdio_cmd: sdio-cmd {
+				rockchip,pins = <0 RK_PA3 2 &pcfg_pull_default>;
+			};
+
+			sdio_pwren: sdio-pwren {
+				rockchip,pins = <0 RK_PD6 1 &pcfg_pull_default>;
+			};
+
+			sdio_bus4: sdio-bus4 {
+				rockchip,pins = <1 RK_PA1 2 &pcfg_pull_default>,
+						<1 RK_PA2 2 &pcfg_pull_default>,
+						<1 RK_PA4 2 &pcfg_pull_default>,
+						<1 RK_PA5 2 &pcfg_pull_default>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>;
+			};
+
+			sdmmc_det: sdmmc-det {
+				rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>;
+			};
+
+			sdmmc_wp: sdmmc-wp {
+				rockchip,pins = <1 RK_PA7 1 &pcfg_pull_default>;
+			};
+
+			sdmmc_pwren: sdmmc-pwren {
+				rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_default>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>,
+						<1 RK_PC3 1 &pcfg_pull_default>,
+						<1 RK_PC4 1 &pcfg_pull_default>,
+						<1 RK_PC5 1 &pcfg_pull_default>;
+			};
+		};
+
+		sfc {
+			sfc_bus2: sfc-bus2 {
+				rockchip,pins = <1 RK_PD0 3 &pcfg_pull_default>,
+						<1 RK_PD1 3 &pcfg_pull_default>;
+			};
+
+			sfc_bus4: sfc-bus4 {
+				rockchip,pins = <1 RK_PD0 3 &pcfg_pull_default>,
+						<1 RK_PD1 3 &pcfg_pull_default>,
+						<1 RK_PD2 3 &pcfg_pull_default>,
+						<1 RK_PD3 3 &pcfg_pull_default>;
+			};
+
+			sfc_clk: sfc-clk {
+				rockchip,pins = <2 RK_PA4 3 &pcfg_pull_none>;
+			};
+
+			sfc_cs0: sfc-cs0 {
+				rockchip,pins = <2 RK_PA2 2 &pcfg_pull_default>;
+			};
+
+			sfc_cs1: sfc-cs1 {
+				rockchip,pins = <2 RK_PA3 2 &pcfg_pull_default>;
+			};
+		};
+
+		spdif {
+			spdif_tx: spdif-tx {
+				rockchip,pins = <3 RK_PD3 1 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>;
+			};
+
+			spi0_cs0: spi0-cs0 {
+				rockchip,pins = <1 RK_PB3 1 &pcfg_pull_default>;
+			};
+
+			spi0_tx: spi0-tx {
+				rockchip,pins = <1 RK_PB1 1 &pcfg_pull_default>;
+			};
+
+			spi0_rx: spi0-rx {
+				rockchip,pins = <1 RK_PB2 1 &pcfg_pull_default>;
+			};
+
+			spi0_cs1: spi0-cs1 {
+				rockchip,pins = <1 RK_PB4 1 &pcfg_pull_default>;
+			};
+
+			spi1_clk: spi1-clk {
+				rockchip,pins = <2 RK_PA0 2 &pcfg_pull_default>;
+			};
+
+			spi1_cs0: spi1-cs0 {
+				rockchip,pins = <1 RK_PD6 3 &pcfg_pull_default>;
+			};
+
+			spi1_tx: spi1-tx {
+				rockchip,pins = <1 RK_PD5 3 &pcfg_pull_default>;
+			};
+
+			spi1_rx: spi1-rx {
+				rockchip,pins = <1 RK_PD4 3 &pcfg_pull_default>;
+			};
+
+			spi1_cs1: spi1-cs1 {
+				rockchip,pins = <1 RK_PD7 3 &pcfg_pull_default>;
+			};
+
+			spi2_clk: spi2-clk {
+				rockchip,pins = <0 RK_PB1 2 &pcfg_pull_default>;
+			};
+
+			spi2_cs0: spi2-cs0 {
+				rockchip,pins = <0 RK_PB6 2 &pcfg_pull_default>;
+			};
+
+			spi2_tx: spi2-tx {
+				rockchip,pins = <0 RK_PB3 2 &pcfg_pull_default>;
+			};
+
+			spi2_rx: spi2-rx {
+				rockchip,pins = <0 RK_PB5 2 &pcfg_pull_default>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <2 RK_PD2 2 &pcfg_pull_default>,
+						<2 RK_PD3 2 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <2 RK_PD5 2 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <0 RK_PC1 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <1 RK_PB1 2 &pcfg_pull_default>,
+						<1 RK_PB2 2 &pcfg_pull_default>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <1 RK_PB0 2 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <1 RK_PB3 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <1 RK_PC2 2 &pcfg_pull_default>,
+						<1 RK_PC3 2 &pcfg_pull_none>;
+			};
+
+			uart2_cts: uart2-cts {
+				rockchip,pins = <0 RK_PD1 1 &pcfg_pull_none>;
+			};
+
+			uart2_rts: uart2-rts {
+				rockchip,pins = <0 RK_PD0 1 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rockchip/rk3188-bqedison2qc.dts
index 9312be362a7a..edc2b7f9112d 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rockchip/rk3188-bqedison2qc.dts
@@ -130,7 +130,7 @@
 		reset-gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
 	};
 
-	avdd_cif: cif-avdd-regulator {
+	avdd_cif: regulator-cif-avdd {
 		compatible = "regulator-fixed";
 		regulator-name = "avdd-cif";
 		regulator-min-microvolt = <2800000>;
@@ -142,7 +142,7 @@
 		vin-supply = <&vcc28_cif>;
 	};
 
-	vcc_5v: vcc-5v-regulator {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc-5v";
 		regulator-min-microvolt = <5000000>;
@@ -154,7 +154,7 @@
 		vin-supply = <&vsys>;
 	};
 
-	vcc_lcd: lcd-regulator {
+	vcc_lcd: regulator-lcd {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc-lcd";
 		gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
@@ -164,7 +164,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vcc_otg: usb-otg-regulator {
+	vcc_otg: regulator-usb-otg {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc-otg";
 		regulator-min-microvolt = <5000000>;
@@ -177,7 +177,7 @@
 		vin-supply = <&vcc_5v>;
 	};
 
-	vcc_sd: sdmmc-regulator {
+	vcc_sd: regulator-sdmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc-sd";
 		regulator-min-microvolt = <3300000>;
@@ -189,7 +189,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vccq_emmc: emmc-vccq-regulator {
+	vccq_emmc: regulator-emmc-vccq {
 		compatible = "regulator-fixed";
 		regulator-name = "vccq-emmc";
 		regulator-min-microvolt = <2800000>;
@@ -198,7 +198,7 @@
 	};
 
 	/* supplied from the bq24196 */
-	vsys: vsys-regulator {
+	vsys: regulator-vsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vsys";
 		regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rockchip/rk3188-px3-evb.dts
index 0a1ae689b162..32f36d7a7d28 100644
--- a/arch/arm/boot/dts/rk3188-px3-evb.dts
+++ b/arch/arm/boot/dts/rockchip/rk3188-px3-evb.dts
@@ -39,7 +39,7 @@
 		};
 	};
 
-	vcc_sys: vsys-regulator {
+	vcc_sys: regulator-vsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vsys";
 		regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rockchip/rk3188-radxarock.dts
index a9ed3cd2c2da..1f31c0a6774f 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rockchip/rk3188-radxarock.dts
@@ -71,14 +71,14 @@
 		#sound-dai-cells = <0>;
 	};
 
-	ir_recv: gpio-ir-receiver {
+	ir_recv: ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ir_recv_pin>;
 	};
 
-	vcc_otg: usb-otg-regulator {
+	vcc_otg: regulator-usb-otg {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
@@ -91,7 +91,7 @@
 		regulator-boot-on;
 	};
 
-	vcc_sd0: sdmmc-regulator {
+	vcc_sd0: regulator-sdmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "sdmmc-supply";
 		regulator-min-microvolt = <3300000>;
@@ -103,7 +103,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vcc_host: usb-host-regulator {
+	vcc_host: regulator-usb-host {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
@@ -116,7 +116,7 @@
 		regulator-boot-on;
 	};
 
-	vsys: vsys-regulator {
+	vsys: regulator-vsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vsys";
 		regulator-min-microvolt = <5000000>;
@@ -126,18 +126,21 @@
 };
 
 &emac {
-	status = "okay";
-
+	phy = <&phy0>;
+	phy-supply = <&vcc_rmii>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+	status = "okay";
 
-	phy = <&phy0>;
-	phy-supply = <&vcc_rmii>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rockchip/rk3188.dtsi
index cdd4a0bd5133..850bd6e67895 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3188.dtsi
@@ -23,7 +23,6 @@
 			compatible = "arm,cortex-a9";
 			next-level-cache = <&L2>;
 			reg = <0x0>;
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			resets = <&cru SRST_CORE0>;
@@ -379,7 +378,7 @@
 				rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>;
 			};
 
-			lcdc1_rgb24: ldcd1-rgb24 {
+			lcdc1_rgb24: lcdc1-rgb24 {
 				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
 						<2 RK_PA1 1 &pcfg_pull_none>,
 						<2 RK_PA2 1 &pcfg_pull_none>,
@@ -607,7 +606,6 @@
 
 &global_timer {
 	interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-	status = "disabled";
 };
 
 &local_timer {
diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rockchip/rk3228-evb.dts
index 69a5e239ed1a..a450cf31a0be 100644
--- a/arch/arm/boot/dts/rk3228-evb.dts
+++ b/arch/arm/boot/dts/rockchip/rk3228-evb.dts
@@ -17,7 +17,7 @@
 		reg = <0x60000000 0x40000000>;
 	};
 
-	vcc_phy: vcc-phy-regulator {
+	vcc_phy: regulator-vcc-phy {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		regulator-name = "vcc_phy";
diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rockchip/rk3229-evb.dts
index 5c3d08e3eea3..c35757d2b5dc 100644
--- a/arch/arm/boot/dts/rk3229-evb.dts
+++ b/arch/arm/boot/dts/rockchip/rk3229-evb.dts
@@ -18,7 +18,7 @@
 		reg = <0x60000000 0x40000000>;
 	};
 
-	dc_12v: dc-12v-regulator {
+	dc_12v: regulator-dc-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "dc_12v";
 		regulator-always-on;
@@ -34,7 +34,7 @@
 		#clock-cells = <0>;
 	};
 
-	vcc_host: vcc-host-regulator {
+	vcc_host: regulator-vcc-host {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
@@ -46,7 +46,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	vcc_phy: vcc-phy-regulator {
+	vcc_phy: regulator-vcc-phy {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		regulator-name = "vcc_phy";
@@ -57,7 +57,7 @@
 		vin-supply = <&vccio_1v8>;
 	};
 
-	vcc_sys: vcc-sys-regulator {
+	vcc_sys: regulator-vcc-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
 		regulator-always-on;
@@ -67,7 +67,7 @@
 		vin-supply = <&dc_12v>;
 	};
 
-	vccio_1v8: vccio-1v8-regulator {
+	vccio_1v8: regulator-vccio-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vccio_1v8";
 		regulator-min-microvolt = <1800000>;
@@ -76,7 +76,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	vccio_3v3: vccio-3v3-regulator {
+	vccio_3v3: regulator-vccio-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vccio_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -85,7 +85,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	vdd_arm: vdd-arm-regulator {
+	vdd_arm: regulator-vdd-arm {
 		compatible = "pwm-regulator";
 		pwms = <&pwm1 0 25000 1>;
 		pwm-supply = <&vcc_sys>;
@@ -96,7 +96,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_log: vdd-log-regulator {
+	vdd_log: regulator-vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm2 0 25000 1>;
 		pwm-supply = <&vcc_sys>;
diff --git a/arch/arm/boot/dts/rk3229-xms6.dts b/arch/arm/boot/dts/rockchip/rk3229-xms6.dts
index 7bfbfd11fb55..28333449c43a 100644
--- a/arch/arm/boot/dts/rk3229-xms6.dts
+++ b/arch/arm/boot/dts/rockchip/rk3229-xms6.dts
@@ -20,7 +20,7 @@
 		reg = <0x60000000 0x40000000>;
 	};
 
-	dc_12v: dc-12v-regulator {
+	dc_12v: regulator-dc-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "dc_12v";
 		regulator-always-on;
@@ -51,7 +51,7 @@
 		              <&gpio2 29 GPIO_ACTIVE_LOW>;
 	};
 
-	vcc_host: vcc-host-regulator {
+	vcc_host: regulator-vcc-host {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
@@ -63,7 +63,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	vcc_phy: vcc-phy-regulator {
+	vcc_phy: regulator-vcc-phy {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		regulator-name = "vcc_phy";
@@ -74,7 +74,7 @@
 		vin-supply = <&vccio_1v8>;
 	};
 
-	vcc_sys: vcc-sys-regulator {
+	vcc_sys: regulator-vcc-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
 		regulator-always-on;
@@ -84,7 +84,7 @@
 		vin-supply = <&dc_12v>;
 	};
 
-	vccio_1v8: vccio-1v8-regulator {
+	vccio_1v8: regulator-vccio-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vccio_1v8";
 		regulator-min-microvolt = <1800000>;
@@ -93,7 +93,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	vccio_3v3: vccio-3v3-regulator {
+	vccio_3v3: regulator-vccio-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vccio_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -102,7 +102,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	vdd_arm: vdd-arm-regulator {
+	vdd_arm: regulator-vdd-arm {
 		compatible = "pwm-regulator";
 		pwms = <&pwm1 0 25000 1>;
 		pwm-supply = <&vcc_sys>;
@@ -113,7 +113,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_log: vdd-log-regulator {
+	vdd_log: regulator-vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm2 0 25000 1>;
 		pwm-supply = <&vcc_sys>;
diff --git a/arch/arm/boot/dts/rk3229.dtsi b/arch/arm/boot/dts/rockchip/rk3229.dtsi
index c340fb30e775..c340fb30e775 100644
--- a/arch/arm/boot/dts/rk3229.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3229.dtsi
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rockchip/rk322x.dtsi
index ffc16d6b97e1..cd11a018105b 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk322x.dtsi
@@ -15,6 +15,10 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -32,7 +36,6 @@
 			resets = <&cru SRST_CORE0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			enable-method = "psci";
 		};
@@ -215,9 +218,9 @@
 
 			power-domain@RK3228_PD_VOP {
 				reg = <RK3228_PD_VOP>;
-				clocks =<&cru ACLK_VOP>,
-					<&cru DCLK_VOP>,
-					<&cru HCLK_VOP>;
+				clocks = <&cru ACLK_VOP>,
+					 <&cru DCLK_VOP>,
+					 <&cru HCLK_VOP>;
 				pm_qos = <&qos_vop>;
 				#power-domain-cells = <0>;
 			};
@@ -732,14 +735,20 @@
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				hdmi_in_vop: endpoint@0 {
-					reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+
+				hdmi_in_vop: endpoint {
 					remote-endpoint = <&vop_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rockchip/rk3288-evb-act8846.dts
index be695b8c1f67..e1821fadbe7a 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-evb-act8846.dts
@@ -7,7 +7,7 @@
 	model = "Rockchip RK3288 EVB ACT8846";
 	compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
 
-	vcc_lcd: vcc-lcd {
+	vcc_lcd: regulator-vcc-lcd {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio7 RK_PA3 GPIO_ACTIVE_HIGH>;
@@ -17,7 +17,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vcc_wl: vcc-wl {
+	vcc_wl: regulator-vcc-wl {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio7 RK_PB1 GPIO_ACTIVE_HIGH>;
@@ -54,7 +54,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563@51 {
+	rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rockchip/rk3288-evb-rk808.dts
index 42384ea4ca21..42384ea4ca21 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-evb-rk808.dts
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rockchip/rk3288-evb.dtsi
index 399d6b9c5fd4..11bb970c6112 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288-evb.dtsi
@@ -28,19 +28,19 @@
 			press-threshold-microvolt = <300000>;
 		};
 
-		menu {
+		button-menu {
 			label = "Menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <640000>;
 		};
 
-		esc {
+		button-esc {
 			label = "Esc";
 			linux,code = <KEY_ESC>;
 			press-threshold-microvolt = <1000000>;
 		};
 
-		home  {
+		button-home  {
 			label = "Home";
 			linux,code = <KEY_HOME>;
 			press-threshold-microvolt = <1300000>;
@@ -129,7 +129,7 @@
 	};
 
 	/* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */
-	vcc_host: vcc-host-regulator {
+	vcc_host: regulator-vcc-host {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
@@ -140,7 +140,7 @@
 		regulator-boot-on;
 	};
 
-	vcc_phy: vcc-phy-regulator {
+	vcc_phy: regulator-vcc-phy {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
@@ -153,7 +153,7 @@
 		regulator-boot-on;
 	};
 
-	vcc_sys: vsys-regulator {
+	vcc_sys: regulator-vsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
 		regulator-min-microvolt = <5000000>;
@@ -167,7 +167,7 @@
 	 * vcc_io directly.  Those boards won't be able to power cycle SD cards
 	 * but it shouldn't hurt to toggle this pin there anyway.
 	 */
-	vcc_sd: sdmmc-regulator {
+	vcc_sd: regulator-sdmmc {
 		compatible = "regulator-fixed";
 		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts b/arch/arm/boot/dts/rockchip/rk3288-firefly-beta.dts
index 135e8832141f..135e8832141f 100644
--- a/arch/arm/boot/dts/rk3288-firefly-beta.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-firefly-beta.dts
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rockchip/rk3288-firefly-reload-core.dtsi
index 36efa36b7190..59029483741b 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288-firefly-reload-core.dtsi
@@ -21,7 +21,7 @@
 	};
 
 
-	vcc_flash: flash-regulator {
+	vcc_flash: regulator-flash {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_flash";
 		regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rockchip/rk3288-firefly-reload.dts
index a5a0826341e6..a55270672732 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-firefly-reload.dts
@@ -85,7 +85,7 @@
 		#sound-dai-cells = <0>;
 	};
 
-	vcc_host_5v: usb-host-regulator {
+	vcc_host_5v: regulator-usb-host {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
@@ -98,7 +98,7 @@
 		vin-supply = <&vcc_5v>;
 	};
 
-	vcc_5v: vcc_sys: vsys-regulator {
+	vcc_5v: vcc_sys: regulator-vsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_5v";
 		regulator-min-microvolt = <5000000>;
@@ -107,7 +107,7 @@
 		regulator-boot-on;
 	};
 
-	vcc_sd: sdmmc-regulator {
+	vcc_sd: regulator-sdmmc {
 		compatible = "regulator-fixed";
 		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
@@ -119,7 +119,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vcc_otg_5v: usb-otg-regulator {
+	vcc_otg_5v: regulator-usb-otg {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
@@ -132,7 +132,7 @@
 		vin-supply = <&vcc_5v>;
 	};
 
-	dovdd_1v8: dovdd-1v8-regulator {
+	dovdd_1v8: regulator-dovdd-1v8 {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
@@ -144,7 +144,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vcc28_dvp: vcc28-dvp-regulator {
+	vcc28_dvp: regulator-vcc28-dvp {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
@@ -156,7 +156,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	af_28: af_28-regulator {
+	af_28: regulator-af-28 {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
@@ -168,7 +168,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	dvdd_1v2: af_28-regulator {
+	dvdd_1v2: regulator-dvdd-1v2 {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>;
@@ -180,7 +180,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vbat_wl: wifi-regulator {
+	vbat_wl: regulator-wifi {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat_wl";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/rk3288-firefly.dts b/arch/arm/boot/dts/rockchip/rk3288-firefly.dts
index 313459dab2e4..313459dab2e4 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-firefly.dts
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rockchip/rk3288-firefly.dtsi
index 052afe5543e2..187d4f0a52eb 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288-firefly.dtsi
@@ -25,7 +25,7 @@
 		};
 	};
 
-	dovdd_1v8: dovdd-1v8-regulator {
+	dovdd_1v8: regulator-dovdd-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "dovdd_1v8";
 		regulator-min-microvolt = <1800000>;
@@ -79,7 +79,7 @@
 		};
 	};
 
-	vbat_wl: vcc_sys: vsys-regulator {
+	vbat_wl: vcc_sys:  regulator-vsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
 		regulator-min-microvolt = <5000000>;
@@ -88,7 +88,7 @@
 		regulator-boot-on;
 	};
 
-	vcc_sd: sdmmc-regulator {
+	vcc_sd: regulator-sdmmc {
 		compatible = "regulator-fixed";
 		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
@@ -100,7 +100,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vcc_flash: flash-regulator {
+	vcc_flash: regulator-flash {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_flash";
 		regulator-min-microvolt = <1800000>;
@@ -108,7 +108,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vcc_5v: usb-regulator {
+	vcc_5v: regulator-usb {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_5v";
 		regulator-min-microvolt = <5000000>;
@@ -118,7 +118,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	vcc_host_5v: usb-host-regulator {
+	vcc_host_5v: regulator-usb-host {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
@@ -131,7 +131,7 @@
 		vin-supply = <&vcc_5v>;
 	};
 
-	vcc_otg_5v: usb-otg-regulator {
+	vcc_otg_5v: regulator-usb-otg {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
@@ -148,7 +148,7 @@
 	 * A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled
 	 * by the dvp_pwr pin.
 	 */
-	vcc28_dvp: vcc28-dvp-regulator {
+	vcc28_dvp: regulator-vcc28-dvp {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
@@ -233,11 +233,10 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		interrupt-parent = <&gpio7>;
 		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rockchip/rk3288-miqi.dts
index 713f55e143c6..a5f5c6d38f80 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-miqi.dts
@@ -37,7 +37,7 @@
 		};
 	};
 
-	vcc_flash: flash-regulator {
+	vcc_flash: regulator-flash {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_flash";
 		regulator-min-microvolt = <1800000>;
@@ -45,7 +45,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vcc_host: usb-host-regulator {
+	vcc_host: regulator-usb-host {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
@@ -58,7 +58,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	vcc_sd: sdmmc-regulator {
+	vcc_sd: regulator-sdmmc {
 		compatible = "regulator-fixed";
 		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
@@ -70,7 +70,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vcc_sys: vsys-regulator {
+	vcc_sys: regulator-vsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
 		regulator-min-microvolt = <5000000>;
@@ -78,6 +78,21 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "HDMI";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s>;
+		};
+	};
 };
 
 &cpu0 {
@@ -130,6 +145,8 @@
 
 &hdmi {
 	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec_c0>;
 	status = "okay";
 };
 
@@ -162,11 +179,10 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 
@@ -284,6 +300,11 @@
 	status = "okay";
 };
 
+&i2s {
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
 &io_domains {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rockchip/rk3288-phycore-rdk.dts
index 1a5156951492..10ce0554d4fc 100644
--- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-phycore-rdk.dts
@@ -35,7 +35,7 @@
 		};
 	};
 
-	vcc_host0_5v: usb-host0-regulator {
+	vcc_host0_5v: regulator-usb-host0 {
 		compatible = "regulator-fixed";
 		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
@@ -47,7 +47,7 @@
 		vin-supply = <&vdd_in_otg_out>;
 	};
 
-	vcc_host1_5v: usb-host1-regulator {
+	vcc_host1_5v: regulator-usb-host1 {
 		compatible = "regulator-fixed";
 		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
@@ -59,7 +59,7 @@
 		vin-supply = <&vdd_in_otg_out>;
 	};
 
-	vcc_otg_5v: usb-otg-regulator {
+	vcc_otg_5v: regulator-usb-otg {
 		compatible = "regulator-fixed";
 		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rockchip/rk3288-phycore-som.dtsi
index e43887c9635f..12ab10c4adde 100644
--- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288-phycore-som.dtsi
@@ -46,7 +46,7 @@
 		};
 	};
 
-	vdd_emmc_io: vdd-emmc-io {
+	vdd_emmc_io: regulator-vdd-emmc-io {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_emmc_io";
 		regulator-min-microvolt = <1800000>;
@@ -54,7 +54,7 @@
 		vin-supply = <&vdd_3v3_io>;
 	};
 
-	vdd_in_otg_out: vdd-in-otg-out {
+	vdd_in_otg_out: regulator-vdd-in-otg-out {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_in_otg_out";
 		regulator-always-on;
@@ -63,7 +63,7 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	vdd_misc_1v8: vdd-misc-1v8 {
+	vdd_misc_1v8: regulator-vdd-misc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_misc_1v8";
 		regulator-always-on;
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rockchip/rk3288-popmetal.dts
index fd90f3b8fc32..560bc23c33b1 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-popmetal.dts
@@ -47,7 +47,7 @@
 		pinctrl-0 = <&ir_int>;
 	};
 
-	vcc_flash: flash-regulator {
+	vcc_flash: regulator-flash {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_flash";
 		regulator-min-microvolt = <1800000>;
@@ -55,7 +55,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vcc_sd: sdmmc-regulator {
+	vcc_sd: regulator-sdmmc {
 		compatible = "regulator-fixed";
 		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
@@ -67,7 +67,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vcc_sys: vsys-regulator {
+	vcc_sys: regulator-vsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
 		regulator-min-microvolt = <5000000>;
@@ -80,7 +80,7 @@
 	 * A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled
 	 * by the dvp_pwr pin.
 	 */
-	vcc18_dvp: vcc18-dvp-regulator {
+	vcc18_dvp: regulator-vcc18-dvp {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc18-dvp";
 		regulator-min-microvolt = <1800000>;
@@ -88,7 +88,7 @@
 		vin-supply = <&vcc28_dvp>;
 	};
 
-	vcc28_dvp: vcc28-dvp-regulator {
+	vcc28_dvp: regulator-vcc28-dvp {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rockchip/rk3288-r89.dts
index 633e5a032463..40c65dbfb1cd 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-r89.dts
@@ -48,7 +48,7 @@
 		pinctrl-0 = <&ir_int>;
 	};
 
-	vcc_host: vcc-host-regulator {
+	vcc_host: regulator-vcc-host {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
@@ -59,7 +59,7 @@
 		regulator-boot-on;
 	};
 
-	vcc_otg: vcc-otg-regulator {
+	vcc_otg: regulator-vcc-otg {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
@@ -70,7 +70,7 @@
 		regulator-boot-on;
 	};
 
-	vcc_sdmmc: sdmmc-regulator {
+	vcc_sdmmc: regulator-sdmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "sdmmc-supply";
 		regulator-min-microvolt = <3300000>;
@@ -80,7 +80,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vcc_sys: sys-regulator {
+	vcc_sys: regulator-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "sys-supply";
 		regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/rk3288-rock-pi-n8.dts b/arch/arm/boot/dts/rockchip/rk3288-rock-pi-n8.dts
index b19593021713..673466d264be 100644
--- a/arch/arm/boot/dts/rk3288-rock-pi-n8.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-rock-pi-n8.dts
@@ -7,7 +7,7 @@
 
 /dts-v1/;
 #include "rk3288.dtsi"
-#include <arm/rockchip-radxa-dalang-carrier.dtsi>
+#include <arm/rockchip/rockchip-radxa-dalang-carrier.dtsi>
 #include "rk3288-vmarc-som.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rockchip/rk3288-rock2-som.dtsi
index 76363b8afcb9..30f914f22a50 100644
--- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288-rock2-som.dtsi
@@ -23,7 +23,7 @@
 		clock-output-names = "ext_gmac";
 	};
 
-	vcc_flash: flash-regulator {
+	vcc_flash: regulator-flash {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_flash";
 		regulator-min-microvolt = <1800000>;
@@ -32,7 +32,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vcc_sys: vsys-regulator {
+	vcc_sys: regulator-vsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
 		regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rockchip/rk3288-rock2-square.dts
index 80e0f07c8e87..58a7270b87da 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-rock2-square.dts
@@ -70,7 +70,7 @@
 		};
 	};
 
-	sata_pwr: sata-prw-regulator {
+	sata_pwr: regulator-sata-prw {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
@@ -108,7 +108,7 @@
 		reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
 	};
 
-	vcc_usb_host: vcc-host-regulator {
+	vcc_usb_host: regulator-vcc-host {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
@@ -117,7 +117,7 @@
 		regulator-name = "vcc_host";
 	};
 
-	vcc_sd: sdmmc-regulator {
+	vcc_sd: regulator-sdmmc {
 		compatible = "regulator-fixed";
 		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
@@ -165,11 +165,10 @@
 };
 
 &i2c0 {
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/rk3288-tinker-s.dts b/arch/arm/boot/dts/rockchip/rk3288-tinker-s.dts
index 970e13859198..970e13859198 100644
--- a/arch/arm/boot/dts/rk3288-tinker-s.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-tinker-s.dts
diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rockchip/rk3288-tinker.dts
index 1e43527aa196..1e43527aa196 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-tinker.dts
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
index 09618bb7d872..8e27a20f2845 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi
@@ -85,7 +85,7 @@
 		};
 	};
 
-	vcc_sys: vsys-regulator {
+	vcc_sys: regulator-vsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
 		regulator-min-microvolt = <5000000>;
@@ -94,7 +94,7 @@
 		regulator-boot-on;
 	};
 
-	vcc_sd: sdmmc-regulator {
+	vcc_sd: regulator-sdmmc {
 		compatible = "regulator-fixed";
 		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rockchip/rk3288-veyron-analog-audio.dtsi
index 51208d161d65..51208d161d65 100644
--- a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-analog-audio.dtsi
diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rockchip/rk3288-veyron-brain.dts
index aa33d09184ad..ade9cc291813 100644
--- a/arch/arm/boot/dts/rk3288-veyron-brain.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-brain.dts
@@ -14,11 +14,11 @@
 	compatible = "google,veyron-brain-rev0", "google,veyron-brain",
 		     "google,veyron", "rockchip,rk3288";
 
-	vcc33_sys: vcc33-sys {
+	vcc33_sys: regulator-vcc33-sys {
 		vin-supply = <&vcc_5v>;
 	};
 
-	vcc33_io: vcc33_io {
+	vcc33_io: regulator-vcc33-io {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc33_io";
 		regulator-always-on;
@@ -28,7 +28,7 @@
 	};
 
 	/* This turns on vbus for host2 and otg (dwc2) */
-	vcc5_host2: vcc5-host2-regulator {
+	vcc5_host2: regulator-vcc5-host2 {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi b/arch/arm/boot/dts/rockchip/rk3288-veyron-broadcom-bluetooth.dtsi
index f9dde0eef527..f9dde0eef527 100644
--- a/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-broadcom-bluetooth.dtsi
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rockchip/rk3288-veyron-chromebook.dtsi
index 700bb548d6b2..3677571b4d82 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-chromebook.dtsi
@@ -43,23 +43,23 @@
 	};
 
 	/* A non-regulated voltage from power supply or battery */
-	vccsys: vccsys {
+	vccsys: regulator-vccsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vccsys";
 		regulator-boot-on;
 		regulator-always-on;
 	};
 
-	vcc33_sys: vcc33-sys {
+	vcc33_sys: regulator-vcc33-sys {
 		vin-supply = <&vccsys>;
 	};
 
-	vcc_5v: vcc-5v {
+	vcc_5v: regulator-vcc-5v {
 		vin-supply = <&vccsys>;
 	};
 
 	/* This turns on vbus for host1 (dwc2) */
-	vcc5_host1: vcc5-host1-regulator {
+	vcc5_host1: regulator-vcc5-host1 {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
@@ -71,7 +71,7 @@
 	};
 
 	/* This turns on vbus for otg for host mode (dwc2) */
-	vcc5v_otg: vcc5v-otg-regulator {
+	vcc5v_otg: regulator-vcc5v-otg {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
@@ -181,4 +181,4 @@
 	};
 };
 
-#include "cros-ec-keyboard.dtsi"
+#include "../cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi b/arch/arm/boot/dts/rockchip/rk3288-veyron-edp.dtsi
index 32c0f10765dd..fb031964fa2b 100644
--- a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-edp.dtsi
@@ -6,7 +6,7 @@
  */
 
 / {
-	backlight_regulator: backlight-regulator {
+	backlight_regulator: regulator-backlight {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
@@ -17,7 +17,7 @@
 		startup-delay-us = <15000>;
 	};
 
-	panel_regulator: panel-regulator {
+	panel_regulator: regulator-panel {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rockchip/rk3288-veyron-fievel.dts
index 309b122b4d0d..6a0844e16279 100644
--- a/arch/arm/boot/dts/rk3288-veyron-fievel.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-fievel.dts
@@ -18,7 +18,7 @@
 		     "google,veyron-fievel-rev0", "google,veyron-fievel",
 		     "google,veyron", "rockchip,rk3288";
 
-	vccsys: vccsys {
+	vccsys: regulator-vccsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vccsys";
 		regulator-boot-on;
@@ -29,14 +29,14 @@
 	 * vcc33_pmuio and vcc33_io is sourced directly from vcc33_sys,
 	 * enabled by vcc_18
 	 */
-	vcc33_io: vcc33-io {
+	vcc33_io: regulator-vcc33-io {
 		compatible = "regulator-fixed";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-name = "vcc33_io";
 	};
 
-	vcc5_host1: vcc5-host1-regulator {
+	vcc5_host1: regulator-vcc5-host1 {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>;
@@ -47,7 +47,7 @@
 		regulator-boot-on;
 	};
 
-	vcc5_host2: vcc5-host2-regulator {
+	vcc5_host2: regulator-vcc5-host2 {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio5 RK_PB6 GPIO_ACTIVE_HIGH>;
@@ -58,7 +58,7 @@
 		regulator-boot-on;
 	};
 
-	vcc5v_otg: vcc5v-otg-regulator {
+	vcc5v_otg: regulator-vcc5v-otg {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rockchip/rk3288-veyron-jaq.dts
index 4a148cf1defc..0d4c50e05558 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-jaq.dts
@@ -8,7 +8,7 @@
 /dts-v1/;
 
 #include "rk3288-veyron-chromebook.dtsi"
-#include "cros-ec-sbs.dtsi"
+#include "../cros-ec-sbs.dtsi"
 
 / {
 	model = "Google Jaq";
diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rockchip/rk3288-veyron-jerry.dts
index 2c916c50dda5..6894763979f0 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-jerry.dts
@@ -7,7 +7,7 @@
 
 /dts-v1/;
 #include "rk3288-veyron-chromebook.dtsi"
-#include "cros-ec-sbs.dtsi"
+#include "../cros-ec-sbs.dtsi"
 
 / {
 	model = "Google Jerry";
diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rockchip/rk3288-veyron-mickey.dts
index ffd1121d19be..d665c3e8862c 100644
--- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-mickey.dts
@@ -18,11 +18,11 @@
 		     "google,veyron-mickey-rev0", "google,veyron-mickey",
 		     "google,veyron", "rockchip,rk3288";
 
-	vcc_5v: vcc-5v {
+	vcc_5v: regulator-vcc-5v {
 		vin-supply = <&vcc33_sys>;
 	};
 
-	vcc33_io: vcc33_io {
+	vcc33_io: regulator-vcc33-io {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc33_io";
 		regulator-always-on;
diff --git a/arch/arm/boot/dts/rk3288-veyron-mighty.dts b/arch/arm/boot/dts/rockchip/rk3288-veyron-mighty.dts
index fa695a88f236..fa695a88f236 100644
--- a/arch/arm/boot/dts/rk3288-veyron-mighty.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-mighty.dts
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rockchip/rk3288-veyron-minnie.dts
index dcdcc55c4098..dcdcc55c4098 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-minnie.dts
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rockchip/rk3288-veyron-pinky.dts
index e2a4e6232eb5..cc27d116d025 100644
--- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-pinky.dts
@@ -7,15 +7,15 @@
 
 /dts-v1/;
 #include "rk3288-veyron-chromebook.dtsi"
-#include "cros-ec-sbs.dtsi"
+#include "../cros-ec-sbs.dtsi"
 
 / {
 	model = "Google Pinky";
 	compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
 		     "google,veyron", "rockchip,rk3288";
 
-	/delete-node/backlight-regulator;
-	/delete-node/panel-regulator;
+	/delete-node/regulator-backlight;
+	/delete-node/regulator-panel;
 	/delete-node/emmc-pwrseq;
 	/delete-node/vcc18-lcd;
 };
diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rockchip/rk3288-veyron-sdmmc.dtsi
index 27fb06ce907e..8b58773e592e 100644
--- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-sdmmc.dtsi
@@ -5,6 +5,12 @@
  * Copyright 2015 Google, Inc
  */
 
+/ {
+	aliases {
+		mmc1 = &sdmmc;
+	};
+};
+
 &io_domains {
 	sdcard-supply = <&vccio_sd>;
 };
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rockchip/rk3288-veyron-speedy.dts
index 4a3ea934d03e..336cd2be5265 100644
--- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-speedy.dts
@@ -8,7 +8,7 @@
 /dts-v1/;
 #include "rk3288-veyron-chromebook.dtsi"
 #include "rk3288-veyron-broadcom-bluetooth.dtsi"
-#include "cros-ec-sbs.dtsi"
+#include "../cros-ec-sbs.dtsi"
 
 / {
 	model = "Google Speedy";
diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rockchip/rk3288-veyron-tiger.dts
index 52a84cbe7a90..52a84cbe7a90 100644
--- a/arch/arm/boot/dts/rk3288-veyron-tiger.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-veyron-tiger.dts
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi
index e406c8c7c7e5..260d6c92cfd1 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi
@@ -10,6 +10,10 @@
 #include "rk3288.dtsi"
 
 / {
+	aliases {
+		mmc0 = &emmc;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -71,7 +75,7 @@
 		reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
 	};
 
-	vcc_5v: vcc-5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_5v";
 		regulator-always-on;
@@ -80,7 +84,7 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	vcc33_sys: vcc33-sys {
+	vcc33_sys: regulator-vcc33-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc33_sys";
 		regulator-always-on;
@@ -89,7 +93,7 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc50_hdmi: vcc50-hdmi {
+	vcc50_hdmi: regulator-vcc50-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc50_hdmi";
 		regulator-always-on;
@@ -97,7 +101,7 @@
 		vin-supply = <&vcc_5v>;
 	};
 
-	vdd_logic: vdd-logic {
+	vdd_logic: regulator-vdd-logic {
 		compatible = "pwm-regulator";
 		regulator-name = "vdd_logic";
 
diff --git a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi b/arch/arm/boot/dts/rockchip/rk3288-vmarc-som.dtsi
index 0ae2bd150e37..44a9efc68f42 100644
--- a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288-vmarc-som.dtsi
@@ -11,7 +11,7 @@
 / {
 	compatible = "vamrs,rk3288-vmarc-som", "rockchip,rk3288";
 
-	vccio_flash: vccio-flash-regulator {
+	vccio_flash: regulator-vccio-flash {
 		compatible = "regulator-fixed";
 		regulator-name = "vccio_flash";
 		regulator-min-microvolt = <1800000>;
@@ -241,7 +241,6 @@
 		interrupt-parent = <&gpio5>;
 		interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "hym8563";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hym8563_int>;
diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rockchip/rk3288-vyasa.dts
index b156a83eb7d7..1954475c69b6 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-vyasa.dts
@@ -19,7 +19,7 @@
 		device_type = "memory";
 	};
 
-	dc12_vbat: dc12-vbat {
+	dc12_vbat: regulator-dc12-vbat {
 		compatible = "regulator-fixed";
 		regulator-name = "dc12_vbat";
 		regulator-min-microvolt = <12000000>;
@@ -28,7 +28,7 @@
 		regulator-boot-on;
 	};
 
-	vboot_3v3: vboot-3v3 {
+	vboot_3v3: regulator-vboot-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vboot_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -38,7 +38,7 @@
 		vin-supply = <&dc12_vbat>;
 	};
 
-	vcc_sys: vsys-regulator {
+	vcc_sys: regulator-vsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
 		regulator-min-microvolt = <3700000>;
@@ -48,7 +48,7 @@
 		vin-supply = <&dc12_vbat>;
 	};
 
-	vboot_5v: vboot-5v {
+	vboot_5v: regulator-vboot-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "vboot_sv";
 		regulator-min-microvolt = <5000000>;
@@ -58,7 +58,7 @@
 		vin-supply = <&dc12_vbat>;
 	};
 
-	v3g_3v3: v3g-3v3 {
+	v3g_3v3: regulator-v3g-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "v3g_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -68,7 +68,7 @@
 		vin-supply = <&dc12_vbat>;
 	};
 
-	vsus_5v: vsus-5v {
+	vsus_5v: regulator-vsus-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "vsus_5v";
 		regulator-min-microvolt = <5000000>;
@@ -78,7 +78,7 @@
 		vin-supply = <&vcc_io>;
 	};
 
-	vcc50_hdmi: vcc50-hdmi {
+	vcc50_hdmi: regulator-vcc50-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc50_hdmi";
 		enable-active-high;
@@ -90,7 +90,7 @@
 		vin-supply = <&vsus_5v>;
 	};
 
-	vusb1_5v: vusb1-5v {
+	vusb1_5v: regulator-vusb1-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "vusb1_5v";
 		enable-active-high;
@@ -102,7 +102,7 @@
 		vin-supply = <&vsus_5v>;
 	};
 
-	vusb2_5v: vusb2-5v {
+	vusb2_5v: regulator-vusb2-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "vusb2_5v";
 		enable-active-high;
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rockchip/rk3288.dtsi
index 487b0e03d4b4..42d705b544ec 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288.dtsi
@@ -19,6 +19,15 @@
 
 	aliases {
 		ethernet0 = &gmac;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		gpio5 = &gpio5;
+		gpio6 = &gpio6;
+		gpio7 = &gpio7;
+		gpio8 = &gpio8;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -61,7 +70,6 @@
 			resets = <&cru SRST_CORE0>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			dynamic-power-coefficient = <370>;
 		};
@@ -72,7 +80,6 @@
 			resets = <&cru SRST_CORE1>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			dynamic-power-coefficient = <370>;
 		};
@@ -83,7 +90,6 @@
 			resets = <&cru SRST_CORE2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			dynamic-power-coefficient = <370>;
 		};
@@ -94,7 +100,6 @@
 			resets = <&cru SRST_CORE3>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			dynamic-power-coefficient = <370>;
 		};
@@ -107,6 +112,7 @@
 		opp-126000000 {
 			opp-hz = /bits/ 64 <126000000>;
 			opp-microvolt = <900000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-216000000 {
 			opp-hz = /bits/ 64 <216000000>;
@@ -942,7 +948,7 @@
 		status = "disabled";
 	};
 
-	spdif: sound@ff88b0000 {
+	spdif: sound@ff8b0000 {
 		compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
 		reg = <0x0 0xff8b0000 0x0 0x10000>;
 		#sound-dai-cells = <0>;
@@ -1114,7 +1120,7 @@
 		status = "disabled";
 	};
 
-	mipi_dsi: mipi@ff960000 {
+	mipi_dsi: dsi@ff960000 {
 		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
 		reg = <0x0 0xff960000 0x0 0x4000>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -1125,18 +1131,28 @@
 		status = "disabled";
 
 		ports {
-			mipi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi_in: port@0 {
+				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+
 				mipi_in_vopb: endpoint@0 {
 					reg = <0>;
 					remote-endpoint = <&vopb_out_mipi>;
 				};
+
 				mipi_in_vopl: endpoint@1 {
 					reg = <1>;
 					remote-endpoint = <&vopl_out_mipi>;
 				};
 			};
+
+			mipi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
@@ -1157,7 +1173,6 @@
 
 			lvds_in: port@0 {
 				reg = <0>;
-
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -1165,11 +1180,16 @@
 					reg = <0>;
 					remote-endpoint = <&vopb_out_lvds>;
 				};
+
 				lvds_in_vopl: endpoint@1 {
 					reg = <1>;
 					remote-endpoint = <&vopl_out_lvds>;
 				};
 			};
+
+			lvds_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
@@ -1181,6 +1201,7 @@
 		clock-names = "dp", "pclk";
 		phys = <&edp_phy>;
 		phy-names = "dp";
+		power-domains = <&power RK3288_PD_VIO>;
 		resets = <&cru SRST_EDP>;
 		reset-names = "dp";
 		rockchip,grf = <&grf>;
@@ -1189,19 +1210,26 @@
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
+
 			edp_in: port@0 {
 				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+
 				edp_in_vopb: endpoint@0 {
 					reg = <0>;
 					remote-endpoint = <&vopb_out_edp>;
 				};
+
 				edp_in_vopl: endpoint@1 {
 					reg = <1>;
 					remote-endpoint = <&vopl_out_edp>;
 				};
 			};
+
+			edp_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
@@ -1209,27 +1237,37 @@
 		compatible = "rockchip,rk3288-dw-hdmi";
 		reg = <0x0 0xff980000 0x0 0x20000>;
 		reg-io-width = <4>;
-		#sound-dai-cells = <0>;
-		rockchip,grf = <&grf>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
 		clock-names = "iahb", "isfr", "cec";
 		power-domains = <&power RK3288_PD_VIO>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+
 				hdmi_in_vopb: endpoint@0 {
 					reg = <0>;
 					remote-endpoint = <&vopb_out_hdmi>;
 				};
+
 				hdmi_in_vopl: endpoint@1 {
 					reg = <1>;
 					remote-endpoint = <&vopl_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rockchip/rk3xxx.dtsi
index 616a828e0c6e..e6a78bcf9163 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3xxx.dtsi
@@ -16,6 +16,10 @@
 
 	aliases {
 		ethernet0 = &emac;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -76,6 +80,13 @@
 		reg = <0x1013c200 0x20>;
 		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 		clocks = <&cru CORE_PERI>;
+		status = "disabled";
+		/* The clock source and the sched_clock provided by the arm_global_timer
+		 * on Rockchip rk3066a/rk3188 are quite unstable because their rates
+		 * depend on the CPU frequency.
+		 * Keep the arm_global_timer disabled in order to have the
+		 * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
+		 */
 	};
 
 	local_timer: local-timer@1013c600 {
@@ -183,19 +194,14 @@
 	};
 
 	emac: ethernet@10204000 {
-		compatible = "snps,arc-emac";
+		compatible = "rockchip,rk3066-emac";
 		reg = <0x10204000 0x3c>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rockchip,grf = <&grf>;
-
 		clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
 		clock-names = "hclk", "macref";
 		max-speed = <100>;
 		phy-mode = "rmii";
-
+		rockchip,grf = <&grf>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/boot/dts/rockchip/rockchip-radxa-dalang-carrier.dtsi
index da1d548b7330..cf5e2ed356ef 100644
--- a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
+++ b/arch/arm/boot/dts/rockchip/rockchip-radxa-dalang-carrier.dtsi
@@ -23,7 +23,7 @@
 		pinctrl-0 = <&wifi_enable_h>;
 	};
 
-	vcc12v_dcin: vcc12v-dcin-regulator {
+	vcc12v_dcin: regulator-vcc12v-dcin {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc12v_dcin";
 		regulator-always-on;
@@ -32,7 +32,7 @@
 		regulator-max-microvolt = <12000000>;
 	};
 
-	vcc5v0_sys: vcc5v0-sys-regulator {
+	vcc5v0_sys: regulator-vcc5v0-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
 		regulator-always-on;
@@ -42,7 +42,7 @@
 		vin-supply = <&vcc12v_dcin>;
 	};
 
-	vbus_host: vbus-host {
+	vbus_host: regulator-vbus-host {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb1_en_oc>;
@@ -51,7 +51,7 @@
 		vin-supply = <&vcc5v0_sys>;
 	};
 
-	vbus_typec: vbus-typec {
+	vbus_typec: regulator-vbus-typec {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb0_en_oc>;
diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dts
index 2d9994379eb2..3c64f0cca9eb 100644
--- a/arch/arm/boot/dts/rv1108-elgin-r1.dts
+++ b/arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dts
@@ -25,7 +25,7 @@
 		stdout-path = "serial2:1500000n8";
 	};
 
-	vcc_sys: vsys-regulator {
+	vcc_sys: regulator-vsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vsys";
 		regulator-min-microvolt = <5000000>;
@@ -168,8 +168,8 @@
 	pinctrl-0 = <&spim1_clk &spim1_cs0 &spim1_tx &spim1_rx>;
 	status = "okay";
 
-	dh2228fv: dac@0 {
-		compatible = "rohm,dh2228fv";
+	display: display@0 {
+		compatible = "elgin,jg10309-01";
 		reg = <0>;
 		spi-max-frequency = <24000000>;
 		spi-cpha;
diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rockchip/rv1108-evb.dts
index ef150f4ee99d..0b04a8325d54 100644
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rockchip/rv1108-evb.dts
@@ -60,7 +60,7 @@
 		pwms = <&pwm0 0 25000 0>;
 	};
 
-	vcc_sys: vsys-regulator {
+	vcc_sys: regulator-vsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vsys";
 		regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rockchip/rv1108.dtsi
index abf3006f0a84..42a4d72597a5 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rockchip/rv1108.dtsi
@@ -32,7 +32,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0xf00>;
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <75>;
@@ -196,7 +195,6 @@
 	pwm4: pwm@10280000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280000 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -208,7 +206,6 @@
 	pwm5: pwm@10280010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280010 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -220,7 +217,6 @@
 	pwm6: pwm@10280020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280020 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -232,7 +228,6 @@
 	pwm7: pwm@10280030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280030 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -386,7 +381,6 @@
 	pwm0: pwm@20040000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040000 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -398,7 +392,6 @@
 	pwm1: pwm@20040010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040010 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -410,7 +403,6 @@
 	pwm2: pwm@20040020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040020 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -422,7 +414,6 @@
 	pwm3: pwm@20040030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040030 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts b/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts
new file mode 100644
index 000000000000..8a92700349b4
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Relfor Labs Pvt. Ltd.
+ */
+
+
+/dts-v1/;
+#include "rv1109.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Rockchip RV1109 Relfor Saib Board";
+	compatible = "relfor,saib", "rockchip,rv1109";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button {
+			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_DATA>;
+			label = "GPIO User Switch";
+			linux,input-type = <1>;
+		};
+	};
+
+	ir_receiver: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3  RK_PB4 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_rx>;
+	};
+
+	ir_transmitter: ir-transmitter {
+		compatible = "pwm-ir-tx";
+		pwms = <&pwm11 0 10000000 1>;
+	};
+
+	led-controller {
+		compatible = "pwm-leds-multicolor";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_INDICATOR;
+			max-brightness = <65535>;
+
+			led-0 {
+				active-low;
+				color = <LED_COLOR_ID_BLUE>;
+				pwms = <&pwm9 0 50000 0>;
+			};
+
+			led-1 {
+				active-low;
+				color = <LED_COLOR_ID_GREEN>;
+				pwms = <&pwm6 0 50000 0>;
+			};
+
+			led-2 {
+				active-low;
+				color = <LED_COLOR_ID_RED>;
+				pwms = <&pwm10 0 50000 0>;
+			};
+		};
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led-0 {
+			pwms = <&pwm2 0 50000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "none";
+		};
+
+		led-1 {
+			pwms = <&pwm8 0 50000 0>;
+			max-brightness = <0>;
+			linux,default-trigger = "none";
+		};
+
+		led-2 {
+			pwms = <&pwm5 0 50000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "none";
+		};
+	};
+
+	sdio_pwrseq: pwrseq-sdio {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc0>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_0v8: regulator-vcc-0v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v8";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		startup-delay-us = <150>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v2_ddr: regulator-vcc-1v2-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v2_ddr";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		startup-delay-us = <75000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		startup-delay-us = <51000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc1v8_ir: regulator-vcc1v8-ir {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_ir";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_2v5_ddr: regulator-vcc-2v5-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_2v5_ddr";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: regulator-vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		startup-delay-us = <75000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_arm: regulator-vdd-arm {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		regulator-name = "vdd_arm";
+		regulator-min-microvolt = <720000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-settling-time-up-us = <18000>;
+		regulator-always-on;
+		regulator-boot-on;
+		pwm-supply = <&vcc3v3_sys>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_npu_vepu: regulator-vdd-npu-vepu {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 1>;
+		regulator-name = "vdd_npu_vepu";
+		regulator-min-microvolt = <650000>;
+		regulator-max-microvolt = <950000>;
+		regulator-settling-time-up-us = <18000>;
+		regulator-always-on;
+		regulator-boot-on;
+		pwm-supply = <&vcc3v3_sys>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	thermal_sensor1: thermal-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&saradc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <(-40000) 826
+					     85000 609>;
+	};
+
+	thermal_sensor2: thermal-sensor2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&saradc 2>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <(-40000) 826
+					     85000 609>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk>;
+	pinctrl-names = "default";
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3m2_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	rtc0: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		#clock-cells = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&rtc_int>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2s0 {
+	/delete-property/ pinctrl-0;
+	rockchip,trcm-sync-rx-only;
+	pinctrl-0 = <&i2s0m0_sclk_rx>,
+		    <&i2s0m0_lrck_rx>,
+		    <&i2s0m0_sdi0>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pinctrl {
+	bluetooth-pins {
+		bt_reset: bt-reset {
+			rockchip,pins =
+			<1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		bt_wake_dev: bt-wake-dev {
+			rockchip,pins =
+			<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		bt_wake_host: bt-wake-host {
+			rockchip,pins =
+			<1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	buttons {
+		switch: switch {
+			rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir {
+		ir_rx: ir-rx {
+			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pwm {
+		pwm0m0_pins_pull_up: pwm0m0-pins-pull-up {
+			rockchip,pins =
+			/* pwm0_pin_m0 */
+			<0 RK_PB6 3 &pcfg_pull_up>;
+		};
+		pwm1m0_pins_pull_up: pwm1m0-pins-pull-up {
+			rockchip,pins =
+			/* pwm1_pin_m0 */
+			<0 RK_PB7 3 &pcfg_pull_up>;
+		};
+	};
+
+	rtc {
+		rtc_int: rtc-int {
+			rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio0-supply = <&vcc3v3_sys>;
+	pmuio1-supply = <&vcc3v3_sys>;
+	vccio4-supply = <&vcc3v3_sys>;
+	vccio5-supply = <&vcc3v3_sys>;
+	vccio6-supply = <&vcc3v3_sys>;
+	vccio7-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&pwm0 {
+	/delete-property/ pinctrl-0;
+	pinctrl-0 = <&pwm0m0_pins_pull_up>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm1 {
+	/delete-property/ pinctrl-0;
+	pinctrl-0 = <&pwm1m0_pins_pull_up>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm2 {
+	/delete-property/ pinctrl-0;
+	pinctrl-0 = <&pwm2m1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm5 {
+	pinctrl-0 = <&pwm5m0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm6 {
+	pinctrl-0 = <&pwm6m0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-0 = <&pwm8m1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm9 {
+	pinctrl-0 = <&pwm9m1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm10 {
+	pinctrl-0 = <&pwm10m1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm11 {
+	/delete-property/ pinctrl-0;
+	pinctrl-0 = <&pwm11m1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	max-frequency = <100000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	no-mmc;
+	no-sd;
+	non-removable;
+	pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		device-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&bt_reset>, <&bt_wake_dev>, <&bt_wake_host>;
+		pinctrl-names = "default";
+	};
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts b/arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts
new file mode 100644
index 000000000000..45dced8087a3
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rv1109.dtsi"
+#include "rv1126-sonoff-ihost.dtsi"
+
+/ {
+	model = "Sonoff iHost 2G";
+	compatible = "itead,sonoff-ihost", "rockchip,rv1109";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
diff --git a/arch/arm/boot/dts/rockchip/rv1109.dtsi b/arch/arm/boot/dts/rockchip/rv1109.dtsi
new file mode 100644
index 000000000000..9cbaa08ab1b8
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1109.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rv1126.dtsi"
+
+/ {
+	compatible = "rockchip,rv1109";
+
+	cpus {
+		/delete-node/ cpu@f02;
+		/delete-node/ cpu@f03;
+	};
+
+	arm-pmu {
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git a/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts
new file mode 100644
index 000000000000..d4e93d7c57a6
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/dts-v1/;
+#include "rv1126.dtsi"
+#include "rv1126-edgeble-neu2.dtsi"
+
+/ {
+	model = "Edgeble Neu2 IO Board";
+	compatible = "edgeble,neural-compute-module-2-io",
+		     "edgeble,neural-compute-module-2", "rockchip,rv1126";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	vcc12v_dcin: regulator-vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	v3v3_sys: regulator-v3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&gmac {
+	assigned-clocks = <&cru CLK_GMAC_SRC>, <&cru CLK_GMAC_TX_RX>,
+			  <&cru CLK_GMAC_ETHERNET_OUT>;
+	assigned-clock-parents = <&cru CLK_GMAC_SRC_M1>, <&cru RGMII_MODE_CLK>;
+	assigned-clock-rates = <125000000>, <0>, <25000000>;
+	clock_in_out = "input";
+	phy-handle = <&phy>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_miim &rgmiim1_bus2 &rgmiim1_bus4 &clk_out_ethernetm1_pins>;
+	tx_delay = <0x2a>;
+	rx_delay = <0x1a>;
+	status = "okay";
+};
+
+&mdio {
+	phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	ethernet {
+		eth_phy_rst: eth-phy-rst {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&pwm11 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2.dtsi b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2.dtsi
new file mode 100644
index 000000000000..5c1b60deb51b
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2.dtsi
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/ {
+	compatible = "edgeble,neural-compute-module-2", "rockchip,rv1126";
+
+	aliases {
+		mmc0 = &emmc;
+	};
+
+	vccio_flash: regulator-vccio-flash {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&flash_vol_sel>;
+		regulator-name = "vccio_flash";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	sdio_pwrseq: pwrseq-sdio {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk>;
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccio_flash>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_npu_vepu: DCDC_REG1 {
+				regulator-name = "vdd_npu_vepu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcc_0v8: LDO_REG1 {
+				regulator-name = "vcc_0v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG2 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd0v8_pmu: LDO_REG3 {
+				regulator-name = "vcc0v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <800000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_dovdd: LDO_REG5 {
+				regulator-name = "vcc_dovdd";
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_dvdd: LDO_REG6 {
+				regulator-name = "vcc_dvdd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_avdd: LDO_REG7 {
+				regulator-name = "vcc_avdd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: LDO_REG9 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_5v0: SWITCH_REG1 {
+				regulator-name = "vcc_5v0";
+			};
+
+			vcc_3v3: SWITCH_REG2 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	bt {
+		bt_enable: bt-enable {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	flash {
+		flash_vol_sel: flash-vol-sel {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio0-supply = <&vcc1v8_pmu>;
+	pmuio1-supply = <&vcc3v3_sys>;
+	vccio1-supply = <&vccio_flash>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_1v8>;
+	vccio4-supply = <&vcc_dovdd>;
+	vccio5-supply = <&vcc_1v8>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_dovdd>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspi_pins>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <100000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca9377-bt";
+		clocks = <&rk809 1>;
+		enable-gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; /* BT_RST */
+		max-speed = <2000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_enable>;
+		vddxo-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
diff --git a/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi b/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi
new file mode 100644
index 000000000000..35ef6732281f
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi
@@ -0,0 +1,597 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <arm64/rockchip/rockchip-pinconf.dtsi>
+
+/*
+ * This file is auto generated by pin2dts tool, please keep these code
+ * by adding changes at end of this file.
+ */
+&pinctrl {
+	clk_out_ethernet {
+		/omit-if-no-ref/
+		clk_out_ethernetm1_pins: clk-out-ethernetm1-pins {
+			rockchip,pins =
+				/* clk_out_ethernet_m1 */
+				<2 RK_PC5 2 &pcfg_pull_none>;
+		};
+	};
+	emmc {
+		/omit-if-no-ref/
+		emmc_rstnout: emmc-rstnout {
+			rockchip,pins =
+				/* emmc_rstn */
+				<1 RK_PA3 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins =
+				/* emmc_d0 */
+				<0 RK_PC4 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d1 */
+				<0 RK_PC5 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d2 */
+				<0 RK_PC6 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d3 */
+				<0 RK_PC7 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d4 */
+				<0 RK_PD0 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d5 */
+				<0 RK_PD1 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d6 */
+				<0 RK_PD2 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d7 */
+				<0 RK_PD3 2 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		emmc_clk: emmc-clk {
+			rockchip,pins =
+				/* emmc_clko */
+				<0 RK_PD7 2 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		emmc_cmd: emmc-cmd {
+			rockchip,pins =
+				/* emmc_cmd */
+				<0 RK_PD5 2 &pcfg_pull_up_drv_level_2>;
+		};
+	};
+	fspi {
+		/omit-if-no-ref/
+		fspi_pins: fspi-pins {
+			rockchip,pins =
+				/* fspi_clk */
+				<1 RK_PA3 3 &pcfg_pull_down>,
+				/* fspi_cs0n */
+				<0 RK_PD4 3 &pcfg_pull_up>,
+				/* fspi_d0 */
+				<1 RK_PA0 3 &pcfg_pull_up>,
+				/* fspi_d1 */
+				<1 RK_PA1 3 &pcfg_pull_up>,
+				/* fspi_d2 */
+				<0 RK_PD6 3 &pcfg_pull_up>,
+				/* fspi_d3 */
+				<1 RK_PA2 3 &pcfg_pull_up>;
+		};
+	};
+	i2c0 {
+		/omit-if-no-ref/
+		i2c0_xfer: i2c0-xfer {
+			rockchip,pins =
+				/* i2c0_scl */
+				<0 RK_PB4 1 &pcfg_pull_none_drv_level_0_smt>,
+				/* i2c0_sda */
+				<0 RK_PB5 1 &pcfg_pull_none_drv_level_0_smt>;
+		};
+	};
+	i2c2 {
+		/omit-if-no-ref/
+		i2c2_xfer: i2c2-xfer {
+			rockchip,pins =
+				/* i2c2_scl */
+				<0 RK_PC2 1 &pcfg_pull_none_drv_level_0_smt>,
+				/* i2c2_sda */
+				<0 RK_PC3 1 &pcfg_pull_none_drv_level_0_smt>;
+		};
+	};
+	i2c3 {
+		/omit-if-no-ref/
+		i2c3m0_xfer: i2c3m0-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m0 */
+				<3 RK_PA4 5 &pcfg_pull_none>,
+				/* i2c3_sda_m0 */
+				<3 RK_PA5 5 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		i2c3m1_xfer: i2c3m1-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m1 */
+				<2 RK_PD4 7 &pcfg_pull_none>,
+				/* i2c3_sda_m1 */
+				<2 RK_PD5 7 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		i2c3m2_xfer: i2c3m2-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m2 */
+				<1 RK_PD6 3 &pcfg_pull_none>,
+				/* i2c3_sda_m2 */
+				<1 RK_PD7 3 &pcfg_pull_none>;
+		};
+	};
+	i2s0 {
+		i2s0m0_lrck_tx: i2s0m0-lrck-tx {
+			rockchip,pins =
+			/* i2s0_lrck_tx_m0 */
+			<3 RK_PD3 1 &pcfg_pull_none>;
+		};
+		i2s0m0_lrck_rx: i2s0m0-lrck-rx {
+			rockchip,pins =
+			/* i2s0_lrck_rx_m0 */
+			<3 RK_PD4 1 &pcfg_pull_none>;
+		};
+		i2s0m0_mclk: i2s0m0-mclk {
+			rockchip,pins =
+			/* i2s0_mclk_m0 */
+			<3 RK_PD2 1 &pcfg_pull_none>;
+		};
+		i2s0m0_sclk_rx: i2s0m0-sclk-rx {
+			rockchip,pins =
+			/* i2s0_sclk_rx_m0 */
+			<3 RK_PD1 1 &pcfg_pull_none>;
+		};
+		i2s0m0_sclk_tx: i2s0m0-sclk-tx {
+			rockchip,pins =
+			/* i2s0_sclk_tx_m0 */
+			<3 RK_PD0 1 &pcfg_pull_none>;
+		};
+		i2s0m0_sdi0: i2s0m0-sdi0 {
+			rockchip,pins =
+			/* i2s0_sdi0_m0 */
+			<3 RK_PD6 1 &pcfg_pull_none>;
+		};
+		i2s0m0_sdo0: i2s0m0-sdo0 {
+			rockchip,pins =
+			/* i2s0_sdo0_m0 */
+			<3 RK_PD5 1 &pcfg_pull_none>;
+		};
+		i2s0m0_sdo1_sdi3: i2s0m0-sdo1-sdi3 {
+			rockchip,pins =
+			/* i2s0_sdo1_sdi3_m0 */
+			<3 RK_PD7 1 &pcfg_pull_none>;
+		};
+		i2s0m0_sdo2_sdi2: i2s0m0-sdo2-sdi2 {
+			rockchip,pins =
+			/* i2s0_sdo2_sdi2_m0 */
+			<4 RK_PA0 1 &pcfg_pull_none>;
+		};
+		i2s0m0_sdo3_sdi1: i2s0m0-sdo3-sdi1 {
+			rockchip,pins =
+			/* i2s0_sdo3_sdi1_m0 */
+			<4 RK_PA1 1 &pcfg_pull_none>;
+		};
+		i2s0m1_lrck_tx: i2s0m1-lrck-tx {
+			rockchip,pins =
+			/* i2s0_lrck_tx_m1 */
+			<3 RK_PA5 3 &pcfg_pull_none>;
+		};
+		i2s0m1_lrck_rx: i2s0m1-lrck-rx {
+			rockchip,pins =
+			/* i2s0_lrck_rx_m1 */
+			<3 RK_PB2 3 &pcfg_pull_none>;
+		};
+		i2s0m1_mclk: i2s0m1-mclk {
+			rockchip,pins =
+			/* i2s0_mclk_m1 */
+			<3 RK_PB0 3 &pcfg_pull_none>;
+		};
+		i2s0m1_sclk_rx: i2s0m1-sclk-rx {
+			rockchip,pins =
+			/* i2s0_sclk_rx_m1 */
+			<3 RK_PB1 3 &pcfg_pull_none>;
+		};
+		i2s0m1_sclk_tx: i2s0m1-sclk-tx {
+			rockchip,pins =
+			/* i2s0_sclk_tx_m1 */
+			<3 RK_PA4 3 &pcfg_pull_none>;
+		};
+		i2s0m1_sdi0: i2s0m1-sdi0 {
+			rockchip,pins =
+			/* i2s0_sdi0_m1 */
+			<3 RK_PA7 3 &pcfg_pull_none>;
+		};
+		i2s0m1_sdo0: i2s0m1-sdo0 {
+			rockchip,pins =
+			/* i2s0_sdo0_m1 */
+			<3 RK_PA6 3 &pcfg_pull_none>;
+		};
+		i2s0m1_sdo1_sdi3: i2s0m1-sdo1-sdi3 {
+			rockchip,pins =
+			/* i2s0_sdo1_sdi3_m1 */
+			<3 RK_PB3 3 &pcfg_pull_none>;
+		};
+		i2s0m1_sdo2_sdi2: i2s0m1-sdo2-sdi2 {
+			rockchip,pins =
+			/* i2s0_sdo2_sdi2_m1 */
+			<3 RK_PB4 3 &pcfg_pull_none>;
+		};
+		i2s0m1_sdo3_sdi1: i2s0m1-sdo3-sdi1 {
+			rockchip,pins =
+			/* i2s0_sdo3_sdi1_m1 */
+			<3 RK_PB5 3 &pcfg_pull_none>;
+		};
+	};
+	pwm0 {
+		/omit-if-no-ref/
+		pwm0m0_pins: pwm0m0-pins {
+			rockchip,pins =
+				/* pwm0_pin_m0 */
+				<0 RK_PB6 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		pwm0m1_pins: pwm0m1-pins {
+			rockchip,pins =
+				/* pwm0_pin_m1 */
+				<2 RK_PB3 5 &pcfg_pull_none>;
+		};
+	};
+	pwm1 {
+		/omit-if-no-ref/
+		pwm1m0_pins: pwm1m0-pins {
+			rockchip,pins =
+				/* pwm1_pin_m0 */
+				<0 RK_PB7 3 &pcfg_pull_none>;
+		};
+	};
+	pwm2 {
+		/omit-if-no-ref/
+		pwm2m0_pins: pwm2m0-pins {
+			rockchip,pins =
+				/* pwm2_pin_m0 */
+				<0 RK_PC0 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		pwm2m1_pins: pwm2m1-pins {
+			rockchip,pins =
+				/* pwm2_pin_m1 */
+				<2 RK_PB1 5 &pcfg_pull_none>;
+		};
+	};
+	pwm3 {
+		/omit-if-no-ref/
+		pwm3m0_pins: pwm3m0-pins {
+			rockchip,pins =
+				/* pwm3_pin_m0 */
+				<0 RK_PC1 3 &pcfg_pull_none>;
+		};
+	};
+	pwm4 {
+		/omit-if-no-ref/
+		pwm4m0_pins: pwm4m0-pins {
+			rockchip,pins =
+				/* pwm4_pin_m0 */
+				<0 RK_PC2 3 &pcfg_pull_none>;
+		};
+	};
+	pwm5 {
+		/omit-if-no-ref/
+		pwm5m0_pins: pwm5m0-pins {
+			rockchip,pins =
+				/* pwm5_pin_m0 */
+				<0 RK_PC3 3 &pcfg_pull_none>;
+		};
+	};
+	pwm6 {
+		/omit-if-no-ref/
+		pwm6m0_pins: pwm6m0-pins {
+			rockchip,pins =
+				/* pwm6_pin_m0 */
+				<0 RK_PB2 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		pwm6m1_pins: pwm6m1-pins {
+			rockchip,pins =
+				/* pwm6_pin_m1 */
+				<2 RK_PD4 5 &pcfg_pull_none>;
+		};
+	};
+	pwm7 {
+		/omit-if-no-ref/
+		pwm7m0_pins: pwm7m0-pins {
+			rockchip,pins =
+				/* pwm7_pin_m0 */
+				<0 RK_PB1 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		pwm7m1_pins: pwm7m1-pins {
+			rockchip,pins =
+				/* pwm7_pin_m1 */
+				<3 RK_PA0 5 &pcfg_pull_none>;
+		};
+	};
+	pwm8 {
+		/omit-if-no-ref/
+		pwm8m0_pins: pwm8m0-pins {
+			rockchip,pins =
+				/* pwm8_pin_m0 */
+				<3 RK_PA4 6 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		pwm8m1_pins: pwm8m1-pins {
+			rockchip,pins =
+				/* pwm8_pin_m1 */
+				<2 RK_PD7 5 &pcfg_pull_none>;
+		};
+	};
+	pwm9 {
+		/omit-if-no-ref/
+		pwm9m0_pins: pwm9m0-pins {
+			rockchip,pins =
+				/* pwm9_pin_m0 */
+				<3 RK_PA5 6 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		pwm9m1_pins: pwm9m1-pins {
+			rockchip,pins =
+				/* pwm9_pin_m1 */
+				<2 RK_PD6 5 &pcfg_pull_none>;
+		};
+	};
+	pwm10 {
+		/omit-if-no-ref/
+		pwm10m0_pins: pwm10m0-pins {
+			rockchip,pins =
+				/* pwm10_pin_m0 */
+				<3 RK_PA6 6 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		pwm10m1_pins: pwm10m1-pins {
+			rockchip,pins =
+				/* pwm10_pin_m1 */
+				<2 RK_PD5 5 &pcfg_pull_none>;
+		};
+	};
+	pwm11 {
+		/omit-if-no-ref/
+		pwm11m0_pins: pwm11m0-pins {
+			rockchip,pins =
+				/* pwm11_pin_m0 */
+				<3 RK_PA7 6 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		pwm11m1_pins: pwm11m1-pins {
+			rockchip,pins =
+				/* pwm11_pin_m1 */
+				<3 RK_PA1 5 &pcfg_pull_none>;
+		};
+	};
+	rgmii {
+		/omit-if-no-ref/
+		rgmiim1_miim: rgmiim1-miim {
+			rockchip,pins =
+				/* rgmii_mdc_m1 */
+				<2 RK_PC2 2 &pcfg_pull_none>,
+				/* rgmii_mdio_m1 */
+				<2 RK_PC1 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_rxer: rgmiim1-rxer {
+			rockchip,pins =
+				/* rgmii_rxer_m1 */
+				<2 RK_PC0 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_bus2: rgmiim1-bus2 {
+			rockchip,pins =
+				/* rgmii_rxd0_m1 */
+				<2 RK_PB5 2 &pcfg_pull_none>,
+				/* rgmii_rxd1_m1 */
+				<2 RK_PB6 2 &pcfg_pull_none>,
+				/* rgmii_rxdv_m1 */
+				<2 RK_PB4 2 &pcfg_pull_none>,
+				/* rgmii_txd0_m1 */
+				<2 RK_PC3 2 &pcfg_pull_none_drv_level_3>,
+				/* rgmii_txd1_m1 */
+				<2 RK_PC4 2 &pcfg_pull_none_drv_level_3>,
+				/* rgmii_txen_m1 */
+				<2 RK_PC6 2 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_bus4: rgmiim1-bus4 {
+			rockchip,pins =
+				/* rgmii_rxclk_m1 */
+				<2 RK_PD3 2 &pcfg_pull_none>,
+				/* rgmii_rxd2_m1 */
+				<2 RK_PC7 2 &pcfg_pull_none>,
+				/* rgmii_rxd3_m1 */
+				<2 RK_PD0 2 &pcfg_pull_none>,
+				/* rgmii_txclk_m1 */
+				<2 RK_PD2 2 &pcfg_pull_none_drv_level_3>,
+				/* rgmii_txd2_m1 */
+				<2 RK_PD1 2 &pcfg_pull_none_drv_level_3>,
+				/* rgmii_txd3_m1 */
+				<2 RK_PA4 2 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		rgmiim1_mclkinout: rgmiim1-mclkinout {
+			rockchip,pins =
+				/* rgmii_clk_m1 */
+				<2 RK_PB7 2 &pcfg_pull_none>;
+		};
+	};
+	sdmmc0 {
+		/omit-if-no-ref/
+		sdmmc0_bus4: sdmmc0-bus4 {
+			rockchip,pins =
+				/* sdmmc0_d0 */
+				<1 RK_PA4 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d1 */
+				<1 RK_PA5 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d2 */
+				<1 RK_PA6 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d3 */
+				<1 RK_PA7 1 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		sdmmc0_clk: sdmmc0-clk {
+			rockchip,pins =
+				/* sdmmc0_clk */
+				<1 RK_PB0 1 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		sdmmc0_cmd: sdmmc0-cmd {
+			rockchip,pins =
+				/* sdmmc0_cmd */
+				<1 RK_PB1 1 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		sdmmc0_det: sdmmc0-det {
+			rockchip,pins =
+				<0 RK_PA3 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		sdmmc0_pwr: sdmmc0-pwr {
+			rockchip,pins =
+				<0 RK_PC0 1 &pcfg_pull_none>;
+		};
+	};
+	sdmmc1 {
+		/omit-if-no-ref/
+		sdmmc1_bus4: sdmmc1-bus4 {
+			rockchip,pins =
+				/* sdmmc1_d0 */
+				<1 RK_PB4 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d1 */
+				<1 RK_PB5 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d2 */
+				<1 RK_PB6 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d3 */
+				<1 RK_PB7 1 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		sdmmc1_clk: sdmmc1-clk {
+			rockchip,pins =
+				/* sdmmc1_clk */
+				<1 RK_PB2 1 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		sdmmc1_cmd: sdmmc1-cmd {
+			rockchip,pins =
+				/* sdmmc1_cmd */
+				<1 RK_PB3 1 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		sdmmc1_det: sdmmc1-det {
+			rockchip,pins =
+				<1 RK_PD0 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		sdmmc1_pwr: sdmmc1-pwr {
+			rockchip,pins =
+				<1 RK_PD1 2 &pcfg_pull_none>;
+		};
+	};
+	uart0 {
+		/omit-if-no-ref/
+		uart0_xfer: uart0-xfer {
+			rockchip,pins =
+				/* uart0_rx */
+				<1 RK_PC2 1 &pcfg_pull_up>,
+				/* uart0_tx */
+				<1 RK_PC3 1 &pcfg_pull_up>;
+		};
+		/omit-if-no-ref/
+		uart0_ctsn: uart0-ctsn {
+			rockchip,pins =
+				<1 RK_PC1 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart0_rtsn: uart0-rtsn {
+			rockchip,pins =
+				<1 RK_PC0 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart0_rtsn_gpio: uart0-rts-pin {
+			rockchip,pins =
+				<1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+	uart1 {
+		/omit-if-no-ref/
+		uart1m0_xfer: uart1m0-xfer {
+			rockchip,pins =
+				/* uart1_rx_m0 */
+				<0 RK_PB7 2 &pcfg_pull_up>,
+				/* uart1_tx_m0 */
+				<0 RK_PB6 2 &pcfg_pull_up>;
+		};
+	};
+	uart2 {
+		/omit-if-no-ref/
+		uart2m1_xfer: uart2m1-xfer {
+			rockchip,pins =
+				/* uart2_rx_m1 */
+				<3 RK_PA3 1 &pcfg_pull_up>,
+				/* uart2_tx_m1 */
+				<3 RK_PA2 1 &pcfg_pull_up>;
+		};
+	};
+	uart3 {
+		/omit-if-no-ref/
+		uart3m0_xfer: uart3m0-xfer {
+			rockchip,pins =
+				/* uart3_rx_m0 */
+				<3 RK_PC7 4 &pcfg_pull_up>,
+				/* uart3_tx_m0 */
+				<3 RK_PC6 4 &pcfg_pull_up>;
+		};
+		/omit-if-no-ref/
+		uart3m2_xfer: uart3m2-xfer {
+			rockchip,pins =
+				/* uart3_rx_m2 */
+				<3 RK_PA1 4 &pcfg_pull_up>,
+				/* uart3_tx_m2 */
+				<3 RK_PA0 4 &pcfg_pull_up>;
+		};
+	};
+	uart4 {
+		/omit-if-no-ref/
+		uart4m0_xfer: uart4m0-xfer {
+			rockchip,pins =
+				/* uart4_rx_m0 */
+				<3 RK_PA5 4 &pcfg_pull_up>,
+				/* uart4_tx_m0 */
+				<3 RK_PA4 4 &pcfg_pull_up>;
+		};
+		/omit-if-no-ref/
+		uart4m2_xfer: uart4m2-xfer {
+			rockchip,pins =
+				/* uart4_rx_m2 */
+				<1 RK_PD4 3 &pcfg_pull_up>,
+				/* uart4_tx_m2 */
+				<1 RK_PD5 3 &pcfg_pull_up>;
+		};
+	};
+	uart5 {
+		/omit-if-no-ref/
+		uart5m0_xfer: uart5m0-xfer {
+			rockchip,pins =
+				/* uart5_rx_m0 */
+				<3 RK_PA7 4 &pcfg_pull_up>,
+				/* uart5_tx_m0 */
+				<3 RK_PA6 4 &pcfg_pull_up>;
+		};
+		/omit-if-no-ref/
+		uart5m2_xfer: uart5m2-xfer {
+			rockchip,pins =
+				/* uart5_rx_m2 */
+				<2 RK_PA1 3 &pcfg_pull_up>,
+				/* uart5_tx_m2 */
+				<2 RK_PA0 3 &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts
new file mode 100644
index 000000000000..77386a48d81e
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rv1126.dtsi"
+#include "rv1126-sonoff-ihost.dtsi"
+
+/ {
+	model = "Sonoff iHost 4G";
+	compatible = "itead,sonoff-ihost", "rockchip,rv1126";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
diff --git a/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
new file mode 100644
index 000000000000..1aedcd3a2167
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/ {
+	aliases {
+		ethernet0 = &gmac;
+		mmc0 = &emmc;
+		mmc1 = &sdio;
+		mmc2 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sdio_pwrseq: pwrseq-sdio {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>;
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_npu_vepu: DCDC_REG1 {
+				regulator-name = "vdd_npu_vepu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcc_0v8: LDO_REG1 {
+				regulator-name = "vcc_0v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG2 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd0v8_pmu: LDO_REG3 {
+				regulator-name = "vcc0v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <800000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_dovdd: LDO_REG5 {
+				regulator-name = "vcc_dovdd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_dvdd: LDO_REG6 {
+				regulator-name = "vcc_dvdd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_avdd: LDO_REG7 {
+				regulator-name = "vcc_avdd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: LDO_REG9 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_5v0: SWITCH_REG1 {
+				regulator-name = "vcc_5v0";
+			};
+
+			vcc_3v3: SWITCH_REG2 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&gmac {
+	assigned-clocks = <&cru CLK_GMAC_SRC_M1>, <&cru CLK_GMAC_SRC>,
+			  <&cru CLK_GMAC_TX_RX>;
+	assigned-clock-parents = <&cru CLK_GMAC_RGMII_M1>, <&cru CLK_GMAC_SRC_M1>,
+				 <&cru RMII_MODE_CLK>;
+	assigned-clock-rates = <0>, <50000000>;
+	clock_in_out = "output";
+	phy-handle = <&phy>;
+	phy-mode = "rmii";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_miim &rgmiim1_rxer &rgmiim1_bus2 &rgmiim1_mclkinout>;
+	status = "okay";
+};
+
+&mdio {
+	phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_rst>;
+		reset-active-low;
+		reset-assert-us = <50000>;
+		reset-deassert-us = <10000>;
+		reset-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	ethernet {
+		eth_phy_rst: eth-phy-rst {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+	bt {
+		bt_enable: bt-enable {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_dev: bt-wake-dev {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio0-supply = <&vcc3v3_sys>;
+	pmuio1-supply = <&vcc3v3_sys>;
+	vccio1-supply = <&vcc_1v8>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc3v3_sd>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <25000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723ds-bt";
+		device-wake-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; /* BT_WAKE */
+		enable-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; /* BT_RST */
+		host-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; /* BT_WAKE_HOST */
+		max-speed = <2000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_enable>, <&bt_wake_dev>, <&bt_wake_host>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3m2_xfer>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4m2_xfer>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rockchip/rv1126.dtsi b/arch/arm/boot/dts/rockchip/rv1126.dtsi
new file mode 100644
index 000000000000..d6e8b63daa42
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1126.dtsi
@@ -0,0 +1,782 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/clock/rockchip,rv1126-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rockchip,rv1126-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	compatible = "rockchip,rv1126";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu1: cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu2: cpu@f02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu3: cpu@f03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	display_subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	grf: syscon@fe000000 {
+		compatible = "rockchip,rv1126-grf", "syscon", "simple-mfd";
+		reg = <0xfe000000 0x20000>;
+	};
+
+	pmugrf: syscon@fe020000 {
+		compatible = "rockchip,rv1126-pmugrf", "syscon", "simple-mfd";
+		reg = <0xfe020000 0x1000>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rv1126-pmu-io-voltage-domain";
+			status = "disabled";
+		};
+	};
+
+	qos_emmc: qos@fe860000 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe860000 0x20>;
+	};
+
+	qos_nandc: qos@fe860080 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe860080 0x20>;
+	};
+
+	qos_sfc: qos@fe860200 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe860200 0x20>;
+	};
+
+	qos_sdio: qos@fe86c000 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe86c000 0x20>;
+	};
+
+	qos_iep: qos@fe8a0000 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe8a0000 0x20>;
+	};
+
+	qos_rga_rd: qos@fe8a0080 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe8a0080 0x20>;
+	};
+
+	qos_rga_wr: qos@fe8a0100 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe8a0100 0x20>;
+	};
+
+	qos_vop: qos@fe8a0180 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe8a0180 0x20>;
+	};
+
+	gic: interrupt-controller@feff0000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0xfeff1000 0x1000>,
+		      <0xfeff2000 0x2000>,
+		      <0xfeff4000 0x2000>,
+		      <0xfeff6000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pmu: power-management@ff3e0000 {
+		compatible = "rockchip,rv1126-pmu", "syscon", "simple-mfd";
+		reg = <0xff3e0000 0x1000>;
+
+		power: power-controller {
+			compatible = "rockchip,rv1126-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-domain@RV1126_PD_NVM {
+				reg = <RV1126_PD_NVM>;
+				clocks = <&cru HCLK_EMMC>,
+					 <&cru CLK_EMMC>,
+					 <&cru HCLK_NANDC>,
+					 <&cru CLK_NANDC>,
+					 <&cru HCLK_SFC>,
+					 <&cru HCLK_SFCXIP>,
+					 <&cru SCLK_SFC>;
+				pm_qos = <&qos_emmc>,
+					 <&qos_nandc>,
+					 <&qos_sfc>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RV1126_PD_SDIO {
+				reg = <RV1126_PD_SDIO>;
+				clocks = <&cru HCLK_SDIO>,
+					 <&cru CLK_SDIO>;
+				pm_qos = <&qos_sdio>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RV1126_PD_VO {
+				reg = <RV1126_PD_VO>;
+				clocks = <&cru ACLK_RGA>,
+					 <&cru HCLK_RGA>,
+					 <&cru CLK_RGA_CORE>,
+					 <&cru ACLK_VOP>,
+					 <&cru HCLK_VOP>,
+					 <&cru DCLK_VOP>,
+					 <&cru PCLK_DSIHOST>,
+					 <&cru ACLK_IEP>,
+					 <&cru HCLK_IEP>,
+					 <&cru CLK_IEP_CORE>;
+				pm_qos = <&qos_rga_rd>,
+					 <&qos_rga_wr>,
+					 <&qos_vop>,
+					 <&qos_iep>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	i2c0: i2c@ff3f0000 {
+		compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
+		reg = <0xff3f0000 0x1000>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,grf = <&pmugrf>;
+		clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff400000 {
+		compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
+		reg = <0xff400000 0x1000>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,grf = <&pmugrf>;
+		clocks = <&pmucru CLK_I2C2>, <&pmucru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff410000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff410000 0x100>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&pmucru SCLK_UART1>, <&pmucru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 7>, <&dmac 6>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1m0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@ff430000 {
+		compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+		reg = <0xff430000 0x10>;
+		clock-names = "pwm", "pclk";
+		clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0m0_pins>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff430010 {
+		compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+		reg = <0xff430010 0x10>;
+		clock-names = "pwm", "pclk";
+		clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1m0_pins>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff430020 {
+		compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+		reg = <0xff430020 0x10>;
+		clock-names = "pwm", "pclk";
+		clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2m0_pins>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff430030 {
+		compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+		reg = <0xff430030 0x10>;
+		clock-names = "pwm", "pclk";
+		clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3m0_pins>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm4: pwm@ff440000 {
+		compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+		reg = <0xff440000 0x10>;
+		clock-names = "pwm", "pclk";
+		clocks = <&pmucru CLK_PWM1>, <&pmucru PCLK_PWM1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm4m0_pins>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm5: pwm@ff440010 {
+		compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+		reg = <0xff440010 0x10>;
+		clock-names = "pwm", "pclk";
+		clocks = <&pmucru CLK_PWM1>, <&pmucru PCLK_PWM1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm5m0_pins>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm6: pwm@ff440020 {
+		compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+		reg = <0xff440020 0x10>;
+		clock-names = "pwm", "pclk";
+		clocks = <&pmucru CLK_PWM1>, <&pmucru PCLK_PWM1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm6m0_pins>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm7: pwm@ff440030 {
+		compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+		reg = <0xff440030 0x10>;
+		clock-names = "pwm", "pclk";
+		clocks = <&pmucru CLK_PWM1>, <&pmucru PCLK_PWM1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm7m0_pins>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pmucru: clock-controller@ff480000 {
+		compatible = "rockchip,rv1126-pmucru";
+		reg = <0xff480000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	cru: clock-controller@ff490000 {
+		compatible = "rockchip,rv1126-cru";
+		reg = <0xff490000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	dmac: dma-controller@ff4e0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0xff4e0000 0x4000>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC>;
+		clock-names = "apb_pclk";
+	};
+
+	i2c3: i2c@ff520000 {
+		compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
+		reg = <0xff520000 0x1000>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3m0_xfer>;
+		rockchip,grf = <&pmugrf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	pwm8: pwm@ff550000 {
+		compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+		reg = <0xff550000 0x10>;
+		clock-names = "pwm", "pclk";
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		pinctrl-0 = <&pwm8m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm9: pwm@ff550010 {
+		compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+		reg = <0xff550010 0x10>;
+		clock-names = "pwm", "pclk";
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		pinctrl-0 = <&pwm9m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm10: pwm@ff550020 {
+		compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+		reg = <0xff550020 0x10>;
+		clock-names = "pwm", "pclk";
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		pinctrl-0 = <&pwm10m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm11: pwm@ff550030 {
+		compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm";
+		reg = <0xff550030 0x10>;
+		clock-names = "pwm", "pclk";
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		pinctrl-0 = <&pwm11m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	uart0: serial@ff560000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff560000 0x100>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 5>, <&dmac 4>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff570000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff570000 0x100>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 9>, <&dmac 8>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m1_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff580000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff580000 0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 11>, <&dmac 10>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3m0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff590000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff590000 0x100>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 13>, <&dmac 12>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart4m0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart5: serial@ff5a0000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff5a0000 0x100>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 15>, <&dmac 14>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart5m0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	saradc: adc@ff5e0000 {
+		compatible = "rockchip,rv1126-saradc", "rockchip,rk3399-saradc";
+		reg = <0xff5e0000 0x100>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC_P>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	timer0: timer@ff660000 {
+		compatible = "rockchip,rv1126-timer", "rockchip,rk3288-timer";
+		reg = <0xff660000 0x20>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&cru CLK_TIMER0>;
+		clock-names = "pclk", "timer";
+	};
+
+	wdt: watchdog@ff680000 {
+		compatible = "rockchip,rv1126-wdt", "snps,dw-wdt";
+		reg = <0xff680000 0x100>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_WDT>;
+		status = "disabled";
+	};
+
+	i2s0: i2s@ff800000 {
+		compatible = "rockchip,rv1126-i2s-tdm";
+		reg = <0xff800000 0x1000>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru MCLK_I2S0_TX>, <&cru MCLK_I2S0_RX>, <&cru HCLK_I2S0>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		dmas = <&dmac 20>, <&dmac 19>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0m0_sclk_tx>,
+			     <&i2s0m0_sclk_rx>,
+			     <&i2s0m0_mclk>,
+			     <&i2s0m0_lrck_tx>,
+			     <&i2s0m0_lrck_rx>,
+			     <&i2s0m0_sdi0>,
+			     <&i2s0m0_sdo0>,
+			     <&i2s0m0_sdo1_sdi3>,
+			     <&i2s0m0_sdo2_sdi2>,
+			     <&i2s0m0_sdo3_sdi1>;
+		resets = <&cru SRST_I2S0_TX_M>, <&cru SRST_I2S0_RX_M>;
+		reset-names = "tx-m", "rx-m";
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	vop: vop@ffb00000 {
+		compatible = "rockchip,rv1126-vop";
+		reg = <0xffb00000 0x200>, <0xffb00a00 0x400>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		clocks = <&cru ACLK_VOP>, <&cru DCLK_VOP>, <&cru HCLK_VOP>;
+		reset-names = "axi", "ahb", "dclk";
+		resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
+		iommus = <&vop_mmu>;
+		power-domains = <&power RV1126_PD_VO>;
+		status = "disabled";
+
+		vop_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vop_out_rgb: endpoint@0 {
+				reg = <0>;
+			};
+
+			vop_out_dsi: endpoint@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@ffb00f00 {
+		compatible = "rockchip,iommu";
+		reg = <0xffb00f00 0x100>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "aclk", "iface";
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		#iommu-cells = <0>;
+		power-domains = <&power RV1126_PD_VO>;
+		status = "disabled";
+	};
+
+	gmac: ethernet@ffc40000 {
+		compatible = "rockchip,rv1126-gmac", "snps,dwmac-4.20a";
+		reg = <0xffc40000 0x4000>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		rockchip,grf = <&grf>;
+		clocks = <&cru CLK_GMAC_SRC>, <&cru CLK_GMAC_TX_RX>,
+			 <&cru CLK_GMAC_TX_RX>, <&cru CLK_GMAC_REF>,
+			 <&cru ACLK_GMAC>, <&cru PCLK_GMAC>,
+			 <&cru CLK_GMAC_TX_RX>, <&cru CLK_GMAC_PTPREF>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "aclk_mac", "pclk_mac",
+			      "clk_mac_speed", "ptp_ref";
+		resets = <&cru SRST_GMAC_A>;
+		reset-names = "stmmaceth";
+
+		snps,mixed-burst;
+		snps,tso;
+
+		snps,axi-config = <&stmmac_axi_setup>;
+		snps,mtl-rx-config = <&mtl_rx_setup>;
+		snps,mtl-tx-config = <&mtl_tx_setup>;
+		status = "disabled";
+
+		mdio: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+		};
+
+		stmmac_axi_setup: stmmac-axi-config {
+			snps,wr_osr_lmt = <4>;
+			snps,rd_osr_lmt = <8>;
+			snps,blen = <0 0 0 0 16 8 4>;
+		};
+
+		mtl_rx_setup: rx-queues-config {
+			snps,rx-queues-to-use = <1>;
+			queue0 {};
+		};
+
+		mtl_tx_setup: tx-queues-config {
+			snps,tx-queues-to-use = <1>;
+			queue0 {};
+		};
+	};
+
+	emmc: mmc@ffc50000 {
+		compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0xffc50000 0x4000>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru CLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <200000000>;
+		power-domains = <&power RV1126_PD_NVM>;
+		status = "disabled";
+	};
+
+	sdmmc: mmc@ffc60000 {
+		compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0xffc60000 0x4000>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru CLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <200000000>;
+		status = "disabled";
+	};
+
+	sdio: mmc@ffc70000 {
+		compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0xffc70000 0x4000>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru CLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <200000000>;
+		power-domains = <&power RV1126_PD_SDIO>;
+		status = "disabled";
+	};
+
+	sfc: spi@ffc90000  {
+		compatible = "rockchip,sfc";
+		reg = <0xffc90000 0x4000>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_SFC>;
+		assigned-clock-rates = <80000000>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+		power-domains = <&power RV1126_PD_NVM>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rv1126-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio@ff460000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff460000 0x100>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@ff620000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff620000 0x100>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@ff630000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff630000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@ff640000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff640000 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@ff650000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff650000 0x100>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
+
+#include "rv1126-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/s3c2410-pinctrl.h b/arch/arm/boot/dts/s3c2410-pinctrl.h
deleted file mode 100644
index 76b6171ae149..000000000000
--- a/arch/arm/boot/dts/s3c2410-pinctrl.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Samsung S3C2410 DTS pinctrl constants
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2022 Linaro Ltd
- * Author: Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#ifndef __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__
-#define __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__
-
-#define S3C2410_PIN_FUNC_INPUT		0
-#define S3C2410_PIN_FUNC_OUTPUT		1
-#define S3C2410_PIN_FUNC_2		2
-#define S3C2410_PIN_FUNC_3		3
-
-#endif /* __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
deleted file mode 100644
index 3268366bd8bc..000000000000
--- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung S3C2416 pinctrl settings
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- */
-
-#include "s3c2410-pinctrl.h"
-
-&pinctrl_0 {
-	/*
-	 * Pin banks
-	 */
-
-	gpa: gpa-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpb: gpb-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpc: gpc-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpd: gpd-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpe: gpe-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpf: gpf-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg: gpg-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gph: gph-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpj: gpj-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpk: gpk-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpl: gpl-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpm: gpm-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	/*
-	 * Pin groups
-	 */
-
-	uart0_data: uart0-data-pins {
-		samsung,pins = "gph-0", "gph-1";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	uart0_fctl: uart0-fctl-pins {
-		samsung,pins = "gph-8", "gph-9";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	uart1_data: uart1-data-pins {
-		samsung,pins = "gph-2", "gph-3";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	uart1_fctl: uart1-fctl-pins {
-		samsung,pins = "gph-10", "gph-11";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	uart2_data: uart2-data-pins {
-		samsung,pins = "gph-4", "gph-5";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	uart2_fctl: uart2-fctl-pins {
-		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	uart3_data: uart3-data-pins {
-		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	extuart_clk: extuart-clk-pins {
-		samsung,pins = "gph-12";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	i2c0_bus: i2c0-bus-pins {
-		samsung,pins = "gpe-14", "gpe-15";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	spi0_bus: spi0-bus-pins {
-		samsung,pins = "gpe-11", "gpe-12", "gpe-13";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	sd0_clk: sd0-clk-pins {
-		samsung,pins = "gpe-5";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	sd0_cmd: sd0-cmd-pins {
-		samsung,pins = "gpe-6";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	sd0_bus1: sd0-bus1-pins {
-		samsung,pins = "gpe-7";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	sd0_bus4: sd0-bus4-pins {
-		samsung,pins = "gpe-8", "gpe-9", "gpe-10";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	sd1_cmd: sd1-cmd-pins {
-		samsung,pins = "gpl-8";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	sd1_clk: sd1-clk-pins {
-		samsung,pins = "gpl-9";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	sd1_bus1: sd1-bus1-pins {
-		samsung,pins = "gpl-0";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	sd1_bus4: sd1-bus4-pins {
-		samsung,pins = "gpl-1", "gpl-2", "gpl-3";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-};
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
deleted file mode 100644
index e7c379a9842e..000000000000
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung SMDK2416 board device tree source
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- */
-
-/dts-v1/;
-#include "s3c2416.dtsi"
-
-/ {
-	model = "SMDK2416";
-	compatible = "samsung,smdk2416", "samsung,s3c2416";
-
-	memory@30000000 {
-		device_type = "memory";
-		reg =  <0x30000000 0x4000000>;
-	};
-
-	xti: clock-0 {
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-		clock-output-names = "xti";
-		#clock-cells = <0>;
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sdhci_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>,
-			<&sd1_bus1>, <&sd1_bus4>;
-	bus-width = <4>;
-	broken-cd;
-	status = "okay";
-};
-
-&sdhci_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>,
-			<&sd0_bus1>, <&sd0_bus4>;
-	bus-width = <4>;
-	cd-gpios = <&gpf 1 0>;
-	cd-inverted;
-	status = "okay";
-};
-
-&uart_0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
-};
-
-&uart_1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
-};
-
-&uart_2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_data>;
-};
-
-&uart_3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_data>;
-};
-
-&watchdog {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
deleted file mode 100644
index 4660751cb207..000000000000
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's S3C2416 SoC device tree source
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- */
-
-#include <dt-bindings/clock/s3c2443.h>
-#include "s3c24xx.dtsi"
-#include "s3c2416-pinctrl.dtsi"
-
-/ {
-	model = "Samsung S3C2416 SoC";
-	compatible = "samsung,s3c2416";
-
-	aliases {
-		serial3 = &uart_3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-			reg = <0x0>;
-		};
-	};
-
-	clocks: clock-controller@4c000000 {
-		compatible = "samsung,s3c2416-clock";
-		reg = <0x4c000000 0x40>;
-		#clock-cells = <1>;
-	};
-
-	uart_3: serial@5000c000 {
-		compatible = "samsung,s3c2440-uart";
-		reg = <0x5000C000 0x4000>;
-		interrupts = <1 18 24 4>, <1 18 25 4>;
-		clock-names = "uart", "clk_uart_baud2",
-				"clk_uart_baud3";
-		clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
-				<&clocks SCLK_UART>;
-		status = "disabled";
-	};
-
-	sdhci_1: mmc@4ac00000 {
-		compatible = "samsung,s3c6410-sdhci";
-		reg = <0x4AC00000 0x100>;
-		interrupts = <0 0 21 3>;
-		clock-names = "hsmmc", "mmc_busclk.0",
-				"mmc_busclk.2";
-		clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
-				<&clocks MUX_HSMMC0>;
-		status = "disabled";
-	};
-
-	sdhci_0: mmc@4a800000 {
-		compatible = "samsung,s3c6410-sdhci";
-		reg = <0x4A800000 0x100>;
-		interrupts = <0 0 20 3>;
-		clock-names = "hsmmc", "mmc_busclk.0",
-				"mmc_busclk.2";
-		clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
-				<&clocks MUX_HSMMC1>;
-		status = "disabled";
-	};
-};
-
-&i2c {
-	compatible = "samsung,s3c2440-i2c";
-	clocks = <&clocks PCLK_I2C0>;
-	clock-names = "i2c";
-};
-
-&intc {
-	compatible = "samsung,s3c2416-irq";
-};
-
-&pinctrl_0 {
-	compatible = "samsung,s3c2416-pinctrl";
-};
-
-&rtc {
-	compatible = "samsung,s3c2416-rtc";
-	clocks = <&clocks PCLK_RTC>;
-	clock-names = "rtc";
-};
-
-&timer {
-	clocks = <&clocks PCLK_PWM>;
-	clock-names = "timers";
-};
-
-&uart_0 {
-	compatible = "samsung,s3c2440-uart";
-	clock-names = "uart", "clk_uart_baud2",
-			"clk_uart_baud3";
-	clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
-			<&clocks SCLK_UART>;
-};
-
-&uart_1 {
-	compatible = "samsung,s3c2440-uart";
-	clock-names = "uart", "clk_uart_baud2",
-			"clk_uart_baud3";
-	clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
-			<&clocks SCLK_UART>;
-};
-
-&uart_2 {
-	compatible = "samsung,s3c2440-uart";
-	clock-names = "uart", "clk_uart_baud2",
-			"clk_uart_baud3";
-	clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
-			<&clocks SCLK_UART>;
-};
-
-&watchdog {
-	interrupts = <1 9 27 3>;
-	clocks = <&clocks PCLK_WDT>;
-	clock-names = "watchdog";
-};
diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi
deleted file mode 100644
index 06f82c7e458e..000000000000
--- a/arch/arm/boot/dts/s3c24xx.dtsi
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's S3C24XX family device tree source
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- */
-
-/ {
-	compatible = "samsung,s3c24xx";
-	interrupt-parent = <&intc>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		serial0 = &uart_0;
-		serial1 = &uart_1;
-		serial2 = &uart_2;
-	};
-
-	intc: interrupt-controller@4a000000 {
-		compatible = "samsung,s3c2410-irq";
-		reg = <0x4a000000 0x100>;
-		interrupt-controller;
-		#interrupt-cells = <4>;
-	};
-
-	pinctrl_0: pinctrl@56000000 {
-		reg = <0x56000000 0x1000>;
-
-		wakeup-interrupt-controller {
-			compatible = "samsung,s3c2410-wakeup-eint";
-			interrupts = <0 0 0 3>,
-				     <0 0 1 3>,
-				     <0 0 2 3>,
-				     <0 0 3 3>,
-				     <0 0 4 4>,
-				     <0 0 5 4>;
-		};
-	};
-
-	timer: pwm@51000000 {
-		compatible = "samsung,s3c2410-pwm";
-		reg = <0x51000000 0x1000>;
-		interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>;
-		#pwm-cells = <3>;
-	};
-
-	uart_0: serial@50000000 {
-		compatible = "samsung,s3c2410-uart";
-		reg = <0x50000000 0x4000>;
-		interrupts = <1 28 0 4>, <1 28 1 4>;
-		status = "disabled";
-	};
-
-	uart_1: serial@50004000 {
-		compatible = "samsung,s3c2410-uart";
-		reg = <0x50004000 0x4000>;
-		interrupts = <1 23 3 4>, <1 23 4 4>;
-		status = "disabled";
-	};
-
-	uart_2: serial@50008000 {
-		compatible = "samsung,s3c2410-uart";
-		reg = <0x50008000 0x4000>;
-		interrupts = <1 15 6 4>, <1 15 7 4>;
-		status = "disabled";
-	};
-
-	watchdog: watchdog@53000000 {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x53000000 0x100>;
-		interrupts = <0 0 9 3>;
-		status = "disabled";
-	};
-
-	rtc: rtc@57000000 {
-		compatible = "samsung,s3c2410-rtc";
-		reg = <0x57000000 0x100>;
-		interrupts = <0 0 30 3>, <0 0 8 3>;
-		status = "disabled";
-	};
-
-	i2c: i2c@54000000 {
-		compatible = "samsung,s3c2410-i2c";
-		reg = <0x54000000 0x100>;
-		interrupts = <0 0 27 3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
deleted file mode 100644
index d3f60f6a456d..000000000000
--- a/arch/arm/boot/dts/sam9x60.dtsi
+++ /dev/null
@@ -1,729 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * sam9x60.dtsi - Device Tree Include file for Microchip SAM9X60 SoC
- *
- * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
- *
- * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
- */
-
-#include <dt-bindings/dma/at91.h>
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
-#include <dt-bindings/mfd/atmel-flexcom.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Microchip SAM9X60 SoC";
-	compatible = "microchip,sam9x60";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		gpio3 = &pioD;
-		tcb0 = &tcb0;
-		tcb1 = &tcb1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x10000000>;
-	};
-
-	clocks {
-		slow_xtal: slow_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-		};
-
-		main_xtal: main_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-		};
-	};
-
-	sram: sram@300000 {
-		compatible = "mmio-sram";
-		reg = <0x00300000 0x100000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x00300000 0x100000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		usb0: gadget@500000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "microchip,sam9x60-udc";
-			reg = <0x00500000 0x100000
-				0xf803c000 0x400>;
-			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
-			clock-names = "pclk", "hclk";
-			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
-			assigned-clock-rates = <480000000>;
-			status = "disabled";
-		};
-
-		usb1: ohci@600000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00600000 0x100000>;
-			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
-			clock-names = "ohci_clk", "hclk", "uhpck";
-			status = "disabled";
-		};
-
-		usb2: ehci@700000 {
-			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
-			reg = <0x00700000 0x100000>;
-			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
-			clock-names = "usb_clk", "ehci_clk";
-			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
-			assigned-clock-rates = <480000000>;
-			status = "disabled";
-		};
-
-		ebi: ebi@10000000 {
-			compatible = "microchip,sam9x60-ebi";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			atmel,smc = <&smc>;
-			microchip,sfr = <&sfr>;
-			reg = <0x10000000 0x60000000>;
-			ranges = <0x0 0x0 0x10000000 0x10000000
-				  0x1 0x0 0x20000000 0x10000000
-				  0x2 0x0 0x30000000 0x10000000
-				  0x3 0x0 0x40000000 0x10000000
-				  0x4 0x0 0x50000000 0x10000000
-				  0x5 0x0 0x60000000 0x10000000>;
-			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-			status = "disabled";
-
-			nand_controller: nand-controller {
-				compatible = "microchip,sam9x60-nand-controller";
-				ecc-engine = <&pmecc>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				ranges;
-				status = "disabled";
-			};
-		};
-
-		sdmmc0: sdio-host@80000000 {
-			compatible = "microchip,sam9x60-sdhci";
-			reg = <0x80000000 0x300>;
-			interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
-			clock-names = "hclock", "multclk";
-			assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
-			assigned-clock-rates = <100000000>;
-			status = "disabled";
-		};
-
-		sdmmc1: sdio-host@90000000 {
-			compatible = "microchip,sam9x60-sdhci";
-			reg = <0x90000000 0x300>;
-			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
-			clock-names = "hclock", "multclk";
-			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
-			assigned-clock-rates = <100000000>;
-			status = "disabled";
-		};
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			flx4: flexcom@f0000000 {
-				compatible = "atmel,sama5d2-flexcom";
-				reg = <0xf0000000 0x200>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0xf0000000 0x800>;
-				status = "disabled";
-			};
-
-			flx5: flexcom@f0004000 {
-				compatible = "atmel,sama5d2-flexcom";
-				reg = <0xf0004000 0x200>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0xf0004000 0x800>;
-				status = "disabled";
-			};
-
-			dma0: dma-controller@f0008000 {
-				compatible = "microchip,sam9x60-dma", "atmel,sama5d4-dma";
-				reg = <0xf0008000 0x1000>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
-				#dma-cells = <1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
-				clock-names = "dma_clk";
-			};
-
-			ssc: ssc@f0010000 {
-				compatible = "atmel,at91sam9g45-ssc";
-				reg = <0xf0010000 0x4000>;
-				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
-				dmas = <&dma0
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-					 AT91_XDMAC_DT_PERID(38))>,
-				       <&dma0
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-					 AT91_XDMAC_DT_PERID(39))>;
-				dma-names = "tx", "rx";
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			qspi: spi@f0014000 {
-				compatible = "microchip,sam9x60-qspi";
-				reg = <0xf0014000 0x100>, <0x70000000 0x10000000>;
-				reg-names = "qspi_base", "qspi_mmap";
-				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>;
-				dmas = <&dma0
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-					 AT91_XDMAC_DT_PERID(26))>,
-				       <&dma0
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-					 AT91_XDMAC_DT_PERID(27))>;
-				dma-names = "tx", "rx";
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 19>;
-				clock-names = "pclk", "qspick";
-				atmel,pmc = <&pmc>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			i2s: i2s@f001c000 {
-				compatible = "microchip,sam9x60-i2smcc";
-				reg = <0xf001c000 0x100>;
-				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
-				dmas = <&dma0
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-					 AT91_XDMAC_DT_PERID(36))>,
-				       <&dma0
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-					 AT91_XDMAC_DT_PERID(37))>;
-				dma-names = "tx", "rx";
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
-				clock-names = "pclk", "gclk";
-				status = "disabled";
-			};
-
-			flx11: flexcom@f0020000 {
-				compatible = "atmel,sama5d2-flexcom";
-				reg = <0xf0020000 0x200>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0xf0020000 0x800>;
-				status = "disabled";
-			};
-
-			flx12: flexcom@f0024000 {
-				compatible = "atmel,sama5d2-flexcom";
-				reg = <0xf0024000 0x200>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0xf0024000 0x800>;
-				status = "disabled";
-			};
-
-			pit64b: timer@f0028000 {
-				compatible = "microchip,sam9x60-pit64b";
-				reg = <0xf0028000 0x100>;
-				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
-				clock-names = "pclk", "gclk";
-			};
-
-			sha: crypto@f002c000 {
-				compatible = "atmel,at91sam9g46-sha";
-				reg = <0xf002c000 0x100>;
-				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma0
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-					 AT91_XDMAC_DT_PERID(34))>;
-				dma-names = "tx";
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
-				clock-names = "sha_clk";
-			};
-
-			trng: trng@f0030000 {
-				compatible = "microchip,sam9x60-trng";
-				reg = <0xf0030000 0x100>;
-				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
-			};
-
-			aes: crypto@f0034000 {
-				compatible = "atmel,at91sam9g46-aes";
-				reg = <0xf0034000 0x100>;
-				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma0
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-					 AT91_XDMAC_DT_PERID(32))>,
-				       <&dma0
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-					 AT91_XDMAC_DT_PERID(33))>;
-				dma-names = "tx", "rx";
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
-				clock-names = "aes_clk";
-			};
-
-			tdes: crypto@f0038000 {
-				compatible = "atmel,at91sam9g46-tdes";
-				reg = <0xf0038000 0x100>;
-				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma0
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-					 AT91_XDMAC_DT_PERID(31))>,
-				       <&dma0
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-					 AT91_XDMAC_DT_PERID(30))>;
-				dma-names = "tx", "rx";
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
-				clock-names = "tdes_clk";
-			};
-
-			classd: classd@f003c000 {
-				compatible = "atmel,sama5d2-classd";
-				reg = <0xf003c000 0x100>;
-				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
-				dmas = <&dma0
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-					 AT91_XDMAC_DT_PERID(35))>;
-				dma-names = "tx";
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
-				clock-names = "pclk", "gclk";
-				status = "disabled";
-			};
-
-			can0: can@f8000000 {
-				compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
-				reg = <0xf8000000 0x300>;
-				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
-				clock-names = "can_clk";
-				status = "disabled";
-			};
-
-			can1: can@f8004000 {
-				compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
-				reg = <0xf8004000 0x300>;
-				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
-				clock-names = "can_clk";
-				status = "disabled";
-			};
-
-			tcb0: timer@f8008000 {
-				compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xf8008000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k 0>;
-				clock-names = "t0_clk", "slow_clk";
-			};
-
-			tcb1: timer@f800c000 {
-				compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xf800c000 0x100>;
-				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&clk32k 0>;
-				clock-names = "t0_clk", "slow_clk";
-			};
-
-			flx6: flexcom@f8010000 {
-				compatible = "atmel,sama5d2-flexcom";
-				reg = <0xf8010000 0x200>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0xf8010000 0x800>;
-				status = "disabled";
-			};
-
-			flx7: flexcom@f8014000 {
-				compatible = "atmel,sama5d2-flexcom";
-				reg = <0xf8014000 0x200>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0xf8014000 0x800>;
-				status = "disabled";
-			};
-
-			flx8: flexcom@f8018000 {
-				compatible = "atmel,sama5d2-flexcom";
-				reg = <0xf8018000 0x200>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0xf8018000 0x800>;
-				status = "disabled";
-			};
-
-			flx0: flexcom@f801c000 {
-				compatible = "atmel,sama5d2-flexcom";
-				reg = <0xf801c000 0x200>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0xf801c000 0x800>;
-				status = "disabled";
-			};
-
-			flx1: flexcom@f8020000 {
-				compatible = "atmel,sama5d2-flexcom";
-				reg = <0xf8020000 0x200>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0xf8020000 0x800>;
-				status = "disabled";
-			};
-
-			flx2: flexcom@f8024000 {
-				compatible = "atmel,sama5d2-flexcom";
-				reg = <0xf8024000 0x200>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0xf8024000 0x800>;
-				status = "disabled";
-			};
-
-			flx3: flexcom@f8028000 {
-				compatible = "atmel,sama5d2-flexcom";
-				reg = <0xf8028000 0x200>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0xf8028000 0x800>;
-				status = "disabled";
-			};
-
-			macb0: ethernet@f802c000 {
-				compatible = "cdns,sam9x60-macb", "cdns,macb";
-				reg = <0xf802c000 0x1000>;
-				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
-				clock-names = "hclk", "pclk";
-				status = "disabled";
-			};
-
-			macb1: ethernet@f8030000 {
-				compatible = "cdns,sam9x60-macb", "cdns,macb";
-				reg = <0xf8030000 0x1000>;
-				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
-				clock-names = "hclk", "pclk";
-				status = "disabled";
-			};
-
-			pwm0: pwm@f8034000 {
-				compatible = "microchip,sam9x60-pwm";
-				reg = <0xf8034000 0x300>;
-				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			hlcdc: hlcdc@f8038000 {
-				compatible = "microchip,sam9x60-hlcdc";
-				reg = <0xf8038000 0x4000>;
-				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>;
-				clock-names = "periph_clk","sys_clk", "slow_clk";
-				assigned-clocks = <&pmc PMC_TYPE_GCK 25>;
-				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK>;
-				status = "disabled";
-
-				hlcdc-display-controller {
-					compatible = "atmel,hlcdc-display-controller";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						reg = <0>;
-					};
-				};
-
-				hlcdc_pwm: hlcdc-pwm {
-					compatible = "atmel,hlcdc-pwm";
-					#pwm-cells = <3>;
-				};
-			};
-
-			flx9: flexcom@f8040000 {
-				compatible = "atmel,sama5d2-flexcom";
-				reg = <0xf8040000 0x200>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0xf8040000 0x800>;
-				status = "disabled";
-			};
-
-			flx10: flexcom@f8044000 {
-				compatible = "atmel,sama5d2-flexcom";
-				reg = <0xf8044000 0x200>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0xf8044000 0x800>;
-				status = "disabled";
-			};
-
-			isi: isi@f8048000 {
-				compatible = "microchip,sam9x60-isi", "atmel,at91sam9g45-isi";
-				reg = <0xf8048000 0x100>;
-				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 5>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
-				clock-names = "isi_clk";
-				status = "disabled";
-				port {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-			};
-
-			adc: adc@f804c000 {
-				compatible = "microchip,sam9x60-adc", "atmel,sama5d2-adc";
-				reg = <0xf804c000 0x100>;
-				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
-				clock-names = "adc_clk";
-				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>;
-				dma-names = "rx";
-				atmel,min-sample-rate-hz = <200000>;
-				atmel,max-sample-rate-hz = <20000000>;
-				atmel,startup-time-ms = <4>;
-				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
-				#io-channel-cells = <1>;
-				status = "disabled";
-			};
-
-			sfr: sfr@f8050000 {
-				compatible = "microchip,sam9x60-sfr", "syscon";
-				reg = <0xf8050000 0x100>;
-			};
-
-			matrix: matrix@ffffde00 {
-				compatible = "microchip,sam9x60-matrix", "atmel,at91sam9x5-matrix", "syscon";
-				reg = <0xffffde00 0x200>;
-			};
-
-			pmecc: ecc-engine@ffffe000 {
-				compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc";
-				reg = <0xffffe000 0x300>,
-				      <0xffffe600 0x100>;
-			};
-
-			mpddrc: mpddrc@ffffe800 {
-				compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc";
-				reg = <0xffffe800 0x200>;
-				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
-				clock-names = "ddrck", "mpddr";
-			};
-
-			smc: smc@ffffea00 {
-				compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon";
-				reg = <0xffffea00 0x100>;
-			};
-
-			aic: interrupt-controller@fffff100 {
-				compatible = "microchip,sam9x60-aic";
-				#interrupt-cells = <3>;
-				interrupt-controller;
-				reg = <0xfffff100 0x100>;
-				atmel,external-irqs = <31>;
-			};
-
-			dbgu: serial@fffff200 {
-				compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
-				reg = <0xfffff200 0x200>;
-				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
-				dmas = <&dma0
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-					 AT91_XDMAC_DT_PERID(28))>,
-				       <&dma0
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-					 AT91_XDMAC_DT_PERID(29))>;
-				dma-names = "tx", "rx";
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			pinctrl: pinctrl@fffff400 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
-				ranges = <0xfffff400 0xfffff400 0x800>;
-
-				/* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */
-				atmel,mux-mask = <
-						 /*	A	B	C	*/
-						 0xffffffff 0xffe03fff 0xef00019d	/* pioA */
-						 0x03ffffff 0x02fc7e7f 0x00780000	/* pioB */
-						 0xffffffff 0xffffffff 0xf83fffff	/* pioC */
-						 0x003fffff 0x003f8000 0x00000000	/* pioD */
-						 >;
-
-				pioA: gpio@fffff400 {
-					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffff400 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
-				};
-
-				pioB: gpio@fffff600 {
-					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffff600 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					#gpio-lines = <26>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
-				};
-
-				pioC: gpio@fffff800 {
-					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffff800 0x200>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
-				};
-
-				pioD: gpio@fffffa00 {
-					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffffa00 0x200>;
-					interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					#gpio-lines = <22>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
-				};
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "microchip,sam9x60-pmc", "syscon";
-				reg = <0xfffffc00 0x200>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				#clock-cells = <2>;
-				clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
-				clock-names = "td_slck", "md_slck", "main_xtal";
-			};
-
-			reset_controller: reset-controller@fffffe00 {
-				compatible = "microchip,sam9x60-rstc";
-				reg = <0xfffffe00 0x10>;
-				clocks = <&clk32k 0>;
-			};
-
-			shutdown_controller: shdwc@fffffe10 {
-				compatible = "microchip,sam9x60-shdwc";
-				reg = <0xfffffe10 0x10>;
-				clocks = <&clk32k 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				atmel,wakeup-rtc-timer;
-				atmel,wakeup-rtt-timer;
-				status = "disabled";
-			};
-
-			rtt: rtc@fffffe20 {
-				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
-				reg = <0xfffffe20 0x20>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k 0>;
-			};
-
-			pit: timer@fffffe40 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffe40 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
-			};
-
-			clk32k: sckc@fffffe50 {
-				compatible = "microchip,sam9x60-sckc";
-				reg = <0xfffffe50 0x4>;
-				clocks = <&slow_xtal>;
-				#clock-cells = <1>;
-			};
-
-			gpbr: syscon@fffffe60 {
-				compatible = "microchip,sam9x60-gpbr", "atmel,at91sam9260-gpbr", "syscon";
-				reg = <0xfffffe60 0x10>;
-			};
-
-			rtc: rtc@fffffea8 {
-				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
-				reg = <0xfffffea8 0x100>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k 0>;
-			};
-
-			watchdog: watchdog@ffffff80 {
-				compatible = "microchip,sam9x60-wdt";
-				reg = <0xffffff80 0x24>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k 0>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/samsung/Makefile b/arch/arm/boot/dts/samsung/Makefile
new file mode 100644
index 000000000000..7becf36656b1
--- /dev/null
+++ b/arch/arm/boot/dts/samsung/Makefile
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_EXYNOS3) += \
+	exynos3250-artik5-eval.dtb \
+	exynos3250-monk.dtb \
+	exynos3250-rinato.dtb
+dtb-$(CONFIG_ARCH_EXYNOS4) += \
+	exynos4210-i9100.dtb \
+	exynos4210-origen.dtb \
+	exynos4210-smdkv310.dtb \
+	exynos4210-trats.dtb \
+	exynos4210-universal_c210.dtb \
+	exynos4212-tab3-3g8.dtb \
+	exynos4212-tab3-lte8.dtb \
+	exynos4212-tab3-wifi8.dtb \
+	exynos4412-i9300.dtb \
+	exynos4412-i9305.dtb \
+	exynos4412-itop-elite.dtb \
+	exynos4412-n710x.dtb \
+	exynos4412-odroidu3.dtb \
+	exynos4412-odroidx.dtb \
+	exynos4412-odroidx2.dtb \
+	exynos4412-origen.dtb \
+	exynos4412-p4note-n8010.dtb \
+	exynos4412-smdk4412.dtb \
+	exynos4412-tiny4412.dtb \
+	exynos4412-trats2.dtb
+dtb-$(CONFIG_ARCH_EXYNOS5) += \
+	exynos5250-arndale.dtb \
+	exynos5250-smdk5250.dtb \
+	exynos5250-snow.dtb \
+	exynos5250-snow-rev5.dtb \
+	exynos5250-spring.dtb \
+	exynos5260-xyref5260.dtb \
+	exynos5410-odroidxu.dtb \
+	exynos5410-smdk5410.dtb \
+	exynos5420-arndale-octa.dtb \
+	exynos5420-peach-pit.dtb \
+	exynos5420-smdk5420.dtb \
+	exynos5420-chagall-wifi.dtb \
+	exynos5420-klimt-wifi.dtb \
+	exynos5422-odroidhc1.dtb \
+	exynos5422-odroidxu3.dtb \
+	exynos5422-odroidxu3-lite.dtb \
+	exynos5422-odroidxu4.dtb \
+	exynos5422-samsung-k3g.dtb \
+	exynos5800-peach-pi.dtb
+dtb-$(CONFIG_ARCH_S3C64XX) += \
+	s3c6410-mini6410.dtb \
+	s3c6410-smdk6410.dtb
+dtb-$(CONFIG_ARCH_S5PV210) += \
+	s5pv210-aquila.dtb \
+	s5pv210-fascinate4g.dtb \
+	s5pv210-galaxys.dtb \
+	s5pv210-goni.dtb \
+	s5pv210-smdkc110.dtb \
+	s5pv210-smdkv210.dtb \
+	s5pv210-torbreck.dtb
diff --git a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi b/arch/arm/boot/dts/samsung/exynos-mfc-reserved-memory.dtsi
index 597ade3e252f..597ade3e252f 100644
--- a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos-mfc-reserved-memory.dtsi
diff --git a/arch/arm/boot/dts/exynos-pinctrl.h b/arch/arm/boot/dts/samsung/exynos-pinctrl.h
index e3a6df95281c..e3a6df95281c 100644
--- a/arch/arm/boot/dts/exynos-pinctrl.h
+++ b/arch/arm/boot/dts/samsung/exynos-pinctrl.h
diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/samsung/exynos-syscon-restart.dtsi
index ecf416690a15..bc9a78f6d4b7 100644
--- a/arch/arm/boot/dts/exynos-syscon-restart.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos-syscon-restart.dtsi
@@ -7,7 +7,7 @@
 	poweroff: syscon-poweroff {
 		compatible = "syscon-poweroff";
 		regmap = <&pmu_system_controller>;
-		offset = <0x330C>; /* PS_HOLD_CONTROL */
+		offset = <0x330c>; /* PS_HOLD_CONTROL */
 		mask = <0x5200>; /* reset value */
 	};
 
diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/samsung/exynos3250-artik5-eval.dts
index a1e22f630638..660cc7fac4db 100644
--- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts
+++ b/arch/arm/boot/dts/samsung/exynos3250-artik5-eval.dts
@@ -16,6 +16,10 @@
 	model = "Samsung ARTIK5 evaluation board";
 	compatible = "samsung,artik5-eval", "samsung,artik5",
 			"samsung,exynos3250", "samsung,exynos3";
+
+	aliases {
+		mmc0 = &mshc_2;
+	};
 };
 
 &mshc_2 {
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/samsung/exynos3250-artik5.dtsi
index 0ac3f284fbb8..3fdd922e635c 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos3250-artik5.dtsi
@@ -17,6 +17,11 @@
 / {
 	compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3";
 
+	aliases {
+		mmc0 = &mshc_0;
+		mmc1 = &mshc_1;
+	};
+
 	chosen {
 		stdout-path = &serial_2;
 	};
@@ -321,6 +326,7 @@
 	vmmc-supply = <&ldo12_reg>;
 	clock-frequency = <100000000>;
 	max-frequency = <100000000>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/samsung/exynos3250-monk.dts
index 02a9dc479d34..68236c7297d7 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/samsung/exynos3250-monk.dts
@@ -22,6 +22,7 @@
 
 	aliases {
 		i2c7 = &i2c_max77836;
+		mmc0 = &mshc_0;
 	};
 
 	memory@40000000 {
@@ -31,7 +32,7 @@
 
 	firmware@205f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0205F000 0x1000>;
+		reg = <0x0205f000 0x1000>;
 	};
 
 	gpio-keys {
@@ -55,7 +56,7 @@
 		enable-active-high;
 	};
 
-	i2c_max77836: i2c-gpio-0 {
+	i2c_max77836: i2c-8 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -438,12 +439,12 @@
 	broken-cd;
 	non-removable;
 	cap-mmc-highspeed;
-	desc-num = <4>;
 	mmc-hs200-1_8v;
 	card-detect-delay = <200>;
 	vmmc-supply = <&vemmc_reg>;
 	clock-frequency = <100000000>;
 	max-frequency = <100000000>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/samsung/exynos3250-pinctrl.dtsi
index 011ba2eff29e..07828551d4b3 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos3250-pinctrl.dtsi
@@ -5,8 +5,8 @@
  * Copyright (c) 2014 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
+ * Samsung's Exynos3250 SoCs pin-mux and pin-config options are listed as device
+ * tree nodes in this file.
  */
 
 #include "exynos-pinctrl.h"
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/samsung/exynos3250-rinato.dts
index 6d2c7bb19184..36d2171c1ce8 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/samsung/exynos3250-rinato.dts
@@ -23,6 +23,8 @@
 
 	aliases {
 		i2c7 = &i2c_max77836;
+		mmc0 = &mshc_0;
+		mmc1 = &mshc_1;
 	};
 
 	chosen {
@@ -36,7 +38,7 @@
 
 	firmware@205f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0205F000 0x1000>;
+		reg = <0x0205f000 0x1000>;
 	};
 
 	gpio-keys {
@@ -56,7 +58,7 @@
 		reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
 	};
 
-	i2c_max77836: i2c-gpio-0 {
+	i2c_max77836: i2c-8 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -250,7 +252,7 @@
 	i80-if-timings {
 		cs-setup = <0>;
 		wr-setup = <0>;
-		wr-act = <1>;
+		wr-active = <1>;
 		wr-hold = <0>;
 	};
 };
@@ -619,12 +621,12 @@
 	broken-cd;
 	non-removable;
 	cap-mmc-highspeed;
-	desc-num = <4>;
 	mmc-hs200-1_8v;
 	card-detect-delay = <200>;
 	vmmc-supply = <&ldo12_reg>;
 	clock-frequency = <100000000>;
 	max-frequency = <100000000>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/samsung/exynos3250.dtsi
index 326b9e0ed8d3..b6c3826a9424 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos3250.dtsi
@@ -6,7 +6,7 @@
  *		http://www.samsung.com
  *
  * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250
- * based board files can include this file and provide values for board specfic
+ * based board files can include this file and provide values for board specific
  * bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
@@ -28,9 +28,6 @@
 	aliases {
 		pinctrl0 = &pinctrl_0;
 		pinctrl1 = &pinctrl_1;
-		mshc0 = &mshc_0;
-		mshc1 = &mshc_1;
-		mshc2 = &mshc_2;
 		spi0 = &spi_0;
 		spi1 = &spi_1;
 		i2c0 = &i2c_0;
@@ -46,6 +43,157 @@
 		serial2 = &serial_2;
 	};
 
+	bus_dmc: bus-dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_dmc CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+
+		bus_dmc_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+				opp-microvolt = <800000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				opp-microvolt = <800000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+				opp-microvolt = <800000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+				opp-microvolt = <825000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <875000>;
+			};
+		};
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_200>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_isp: bus-isp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_266>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_isp_opp_table>;
+		status = "disabled";
+
+		bus_isp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+			};
+		};
+	};
+
+	bus_lcd0: bus-lcd0 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_160>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_leftbus: bus-leftbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_GDL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mcuisp: bus-mcuisp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_mcuisp_opp_table>;
+		status = "disabled";
+
+		bus_mcuisp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+			};
+		};
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_SCLK_MFC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peril: bus-peril {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_100>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peril_opp_table>;
+		status = "disabled";
+
+		bus_peril_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+	};
+
+	bus_rightbus: bus-rightbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_GDR>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -129,6 +277,31 @@
 		clock-output-names = "xtcxo";
 	};
 
+	bus_leftbus_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-80000000 {
+			opp-hz = /bits/ 64 <80000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1000000>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -170,7 +343,7 @@
 		};
 
 		pmu_system_controller: system-controller@10020000 {
-			compatible = "samsung,exynos3250-pmu", "syscon";
+			compatible = "samsung,exynos3250-pmu", "simple-mfd", "syscon";
 			reg = <0x10020000 0x4000>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -178,45 +351,44 @@
 			clock-names = "clkout8";
 			clocks = <&cmu CLK_FIN_PLL>;
 			#clock-cells = <1>;
-		};
 
-		mipi_phy: video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			#phy-cells = <1>;
-			syscon = <&pmu_system_controller>;
+			mipi_phy: mipi-phy {
+				compatible = "samsung,s5pv210-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
 
 		pd_cam: power-domain@10023c00 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C00 0x20>;
+			reg = <0x10023c00 0x20>;
 			#power-domain-cells = <0>;
 			label = "CAM";
 		};
 
 		pd_mfc: power-domain@10023c40 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C40 0x20>;
+			reg = <0x10023c40 0x20>;
 			#power-domain-cells = <0>;
 			label = "MFC";
 		};
 
 		pd_g3d: power-domain@10023c60 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C60 0x20>;
+			reg = <0x10023c60 0x20>;
 			#power-domain-cells = <0>;
 			label = "G3D";
 		};
 
 		pd_lcd0: power-domain@10023c80 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C80 0x20>;
+			reg = <0x10023c80 0x20>;
 			#power-domain-cells = <0>;
 			label = "LCD0";
 		};
 
 		pd_isp: power-domain@10023ca0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
+			reg = <0x10023ca0 0x20>;
 			#power-domain-cells = <0>;
 			label = "ISP";
 		};
@@ -233,7 +405,7 @@
 
 		cmu_dmc: clock-controller@105c0000 {
 			compatible = "samsung,exynos3250-cmu-dmc";
-			reg = <0x105C0000 0x2000>;
+			reg = <0x105c0000 0x2000>;
 			#clock-cells = <1>;
 		};
 
@@ -248,7 +420,7 @@
 
 		tmu: tmu@100c0000 {
 			compatible = "samsung,exynos3250-tmu";
-			reg = <0x100C0000 0x100>;
+			reg = <0x100c0000 0x100>;
 			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_TMU_APBIF>;
 			clock-names = "tmu_apbif";
@@ -342,7 +514,7 @@
 
 		dsi_0: dsi@11c80000 {
 			compatible = "samsung,exynos3250-mipi-dsi";
-			reg = <0x11C80000 0x10000>;
+			reg = <0x11c80000 0x10000>;
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,phy-type = <0>;
 			power-domains = <&pd_lcd0>;
@@ -365,7 +537,7 @@
 			#iommu-cells = <0>;
 		};
 
-		hsotg: hsotg@12480000 {
+		hsotg: usb@12480000 {
 			compatible = "samsung,s3c6400-hsotg";
 			reg = <0x12480000 0x20000>;
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
@@ -412,9 +584,9 @@
 			status = "disabled";
 		};
 
-		exynos_usbphy: exynos-usbphy@125b0000 {
+		exynos_usbphy: usb-phy@125b0000 {
 			compatible = "samsung,exynos3250-usb2-phy";
-			reg = <0x125B0000 0x100>;
+			reg = <0x125b0000 0x100>;
 			samsung,pmureg-phandle = <&pmu_system_controller>;
 			clocks = <&cmu CLK_USBOTG>, <&cmu CLK_SCLK_UPLL>;
 			clock-names = "phy", "ref";
@@ -442,7 +614,7 @@
 
 		adc: adc@126c0000 {
 			compatible = "samsung,exynos3250-adc";
-			reg = <0x126C0000 0x100>;
+			reg = <0x126c0000 0x100>;
 			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "adc", "sclk";
 			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
@@ -485,7 +657,7 @@
 		};
 
 		mfc: codec@13400000 {
-			compatible = "samsung,mfc-v7";
+			compatible = "samsung,exynos3250-mfc", "samsung,mfc-v7";
 			reg = <0x13400000 0x10000>;
 			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "mfc", "sclk_mfc";
@@ -593,7 +765,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138A0000 0x100>;
+			reg = <0x138a0000 0x100>;
 			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C4>;
 			clock-names = "i2c";
@@ -606,7 +778,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138B0000 0x100>;
+			reg = <0x138b0000 0x100>;
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C5>;
 			clock-names = "i2c";
@@ -619,7 +791,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138C0000 0x100>;
+			reg = <0x138c0000 0x100>;
 			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C6>;
 			clock-names = "i2c";
@@ -632,7 +804,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138D0000 0x100>;
+			reg = <0x138d0000 0x100>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C7>;
 			clock-names = "i2c";
@@ -654,6 +826,7 @@
 			samsung,spi-src-clk = <0>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi0_bus>;
+			fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -670,6 +843,7 @@
 			samsung,spi-src-clk = <0>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi1_bus>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
@@ -688,7 +862,7 @@
 
 		pwm: pwm@139d0000 {
 			compatible = "samsung,exynos4210-pwm";
-			reg = <0x139D0000 0x1000>;
+			reg = <0x139d0000 0x1000>;
 			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
@@ -771,182 +945,6 @@
 			clock-names = "ppmu";
 			status = "disabled";
 		};
-
-		bus_dmc: bus-dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu_dmc CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_dmc_opp_table: opp-table1 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-				opp-microvolt = <800000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <800000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <800000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-microvolt = <825000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <875000>;
-			};
-		};
-
-		bus_leftbus: bus-leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_rightbus: bus-rightbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_GDR>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_lcd0: bus-lcd0 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_fsys: bus-fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_200>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mcuisp: bus-mcuisp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_mcuisp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_isp: bus-isp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_266>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_isp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_peril: bus-peril {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_100>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_peril_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mfc: bus-mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_SCLK_MFC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_leftbus_opp_table: opp-table2 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <1000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <1000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-microvolt = <1000000>;
-			};
-		};
-
-		bus_mcuisp_opp_table: opp-table3 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-			};
-		};
-
-		bus_isp_opp_table: opp-table4 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp-300000000 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-		};
-
-		bus_peril_opp_table: opp-table5 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi b/arch/arm/boot/dts/samsung/exynos4-cpu-thermal.dtsi
index 021d9fc1b492..27a1a8952665 100644
--- a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4-cpu-thermal.dtsi
@@ -10,7 +10,7 @@
 / {
 thermal-zones {
 	cpu_thermal: cpu-thermal {
-		thermal-sensors = <&tmu 0>;
+		thermal-sensors = <&tmu>;
 		polling-delay-passive = <0>;
 		polling-delay = <0>;
 		trips {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/samsung/exynos4.dtsi
index 5c4ecda27a47..ed47d0ce04e1 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4.dtsi
@@ -9,7 +9,7 @@
  *
  * Samsung's Exynos4 SoC series device nodes are listed in this file.  Particular
  * SoCs from Exynos4 series can include this file and provide values for SoCs
- * specfic bindings.
+ * specific bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
  * Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional
@@ -65,7 +65,7 @@
 
 		clock_audss: clock-controller@3810000 {
 			compatible = "samsung,exynos4210-audss-clock";
-			reg = <0x03810000 0x0C>;
+			reg = <0x03810000 0x0c>;
 			#clock-cells = <1>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
 				 <&clock CLK_SCLK_AUDIO0>,
@@ -105,36 +105,30 @@
 			reg = <0x12570000 0x14>;
 		};
 
-		mipi_phy: video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			#phy-cells = <1>;
-			syscon = <&pmu_system_controller>;
-		};
-
 		pd_mfc: power-domain@10023c40 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C40 0x20>;
+			reg = <0x10023c40 0x20>;
 			#power-domain-cells = <0>;
 			label = "MFC";
 		};
 
 		pd_g3d: power-domain@10023c60 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C60 0x20>;
+			reg = <0x10023c60 0x20>;
 			#power-domain-cells = <0>;
 			label = "G3D";
 		};
 
 		pd_lcd0: power-domain@10023c80 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C80 0x20>;
+			reg = <0x10023c80 0x20>;
 			#power-domain-cells = <0>;
 			label = "LCD0";
 		};
 
 		pd_tv: power-domain@10023c20 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C20 0x20>;
+			reg = <0x10023c20 0x20>;
 			#power-domain-cells = <0>;
 			power-domains = <&pd_lcd0>;
 			label = "TV";
@@ -142,21 +136,21 @@
 
 		pd_cam: power-domain@10023c00 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C00 0x20>;
+			reg = <0x10023c00 0x20>;
 			#power-domain-cells = <0>;
 			label = "CAM";
 		};
 
 		pd_gps: power-domain@10023ce0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CE0 0x20>;
+			reg = <0x10023ce0 0x20>;
 			#power-domain-cells = <0>;
 			label = "GPS";
 		};
 
 		pd_gps_alive: power-domain@10023d00 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023D00 0x20>;
+			reg = <0x10023d00 0x20>;
 			#power-domain-cells = <0>;
 			label = "GPS alive";
 		};
@@ -181,16 +175,21 @@
 		};
 
 		pmu_system_controller: system-controller@10020000 {
-			compatible = "samsung,exynos4210-pmu", "syscon";
+			compatible = "samsung,exynos4210-pmu", "simple-mfd", "syscon";
 			reg = <0x10020000 0x4000>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
+
+			mipi_phy: mipi-phy {
+				compatible = "samsung,s5pv210-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
 
 		dsi_0: dsi@11c80000 {
 			compatible = "samsung,exynos4210-mipi-dsi";
-			reg = <0x11C80000 0x10000>;
+			reg = <0x11c80000 0x10000>;
 			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_lcd0>;
 			phys = <&mipi_phy 1>;
@@ -202,18 +201,18 @@
 			#size-cells = <0>;
 		};
 
-		camera: camera {
-			compatible = "samsung,fimc", "simple-bus";
+		camera: camera@11800000 {
+			compatible = "samsung,fimc";
+			ranges = <0x0 0x11800000 0xa0000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#clock-cells = <1>;
 			clock-output-names = "cam_a_clkout", "cam_b_clkout";
-			ranges;
 
-			fimc_0: fimc@11800000 {
+			fimc_0: fimc@0 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11800000 0x1000>;
+				reg = <0x0 0x1000>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC0>,
 					 <&clock CLK_SCLK_FIMC0>;
@@ -224,9 +223,9 @@
 				status = "disabled";
 			};
 
-			fimc_1: fimc@11810000 {
+			fimc_1: fimc@10000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11810000 0x1000>;
+				reg = <0x00010000 0x1000>;
 				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC1>,
 					 <&clock CLK_SCLK_FIMC1>;
@@ -237,9 +236,9 @@
 				status = "disabled";
 			};
 
-			fimc_2: fimc@11820000 {
+			fimc_2: fimc@20000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11820000 0x1000>;
+				reg = <0x00020000 0x1000>;
 				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC2>,
 					 <&clock CLK_SCLK_FIMC2>;
@@ -250,9 +249,9 @@
 				status = "disabled";
 			};
 
-			fimc_3: fimc@11830000 {
+			fimc_3: fimc@30000 {
 				compatible = "samsung,exynos4210-fimc";
-				reg = <0x11830000 0x1000>;
+				reg = <0x00030000 0x1000>;
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_FIMC3>,
 					 <&clock CLK_SCLK_FIMC3>;
@@ -263,9 +262,9 @@
 				status = "disabled";
 			};
 
-			csis_0: csis@11880000 {
+			csis_0: csis@80000 {
 				compatible = "samsung,exynos4210-csis";
-				reg = <0x11880000 0x4000>;
+				reg = <0x00080000 0x4000>;
 				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_CSIS0>,
 					 <&clock CLK_SCLK_CSIS0>;
@@ -279,9 +278,9 @@
 				#size-cells = <0>;
 			};
 
-			csis_1: csis@11890000 {
+			csis_1: csis@90000 {
 				compatible = "samsung,exynos4210-csis";
-				reg = <0x11890000 0x4000>;
+				reg = <0x00090000 0x4000>;
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clock CLK_CSIS1>,
 					 <&clock CLK_SCLK_CSIS1>;
@@ -309,7 +308,7 @@
 
 		keypad: keypad@100a0000 {
 			compatible = "samsung,s5pv210-keypad";
-			reg = <0x100A0000 0x100>;
+			reg = <0x100a0000 0x100>;
 			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_KEYIF>;
 			clock-names = "keypad";
@@ -352,9 +351,9 @@
 			status = "disabled";
 		};
 
-		exynos_usbphy: exynos-usbphy@125b0000 {
+		exynos_usbphy: usb-phy@125b0000 {
 			compatible = "samsung,exynos4210-usb2-phy";
-			reg = <0x125B0000 0x100>;
+			reg = <0x125b0000 0x100>;
 			samsung,pmureg-phandle = <&pmu_system_controller>;
 			clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>;
 			clock-names = "phy", "ref";
@@ -362,7 +361,7 @@
 			status = "disabled";
 		};
 
-		hsotg: hsotg@12480000 {
+		hsotg: usb@12480000 {
 			compatible = "samsung,s3c6400-hsotg";
 			reg = <0x12480000 0x20000>;
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
@@ -546,7 +545,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138A0000 0x100>;
+			reg = <0x138a0000 0x100>;
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C4>;
 			clock-names = "i2c";
@@ -559,7 +558,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138B0000 0x100>;
+			reg = <0x138b0000 0x100>;
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C5>;
 			clock-names = "i2c";
@@ -572,7 +571,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138C0000 0x100>;
+			reg = <0x138c0000 0x100>;
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C6>;
 			clock-names = "i2c";
@@ -585,7 +584,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138D0000 0x100>;
+			reg = <0x138d0000 0x100>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C7>;
 			clock-names = "i2c";
@@ -598,14 +597,14 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-hdmiphy-i2c";
-			reg = <0x138E0000 0x100>;
+			reg = <0x138e0000 0x100>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C_HDMI>;
 			clock-names = "i2c";
 			status = "disabled";
 
-			hdmi_i2c_phy: hdmiphy@38 {
-				compatible = "exynos4210-hdmiphy";
+			hdmi_i2c_phy: hdmi-phy@38 {
+				compatible = "samsung,exynos4210-hdmiphy";
 				reg = <0x38>;
 			};
 		};
@@ -622,6 +621,7 @@
 			clock-names = "spi", "spi_busclk0";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi0_bus>;
+			fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -637,6 +637,7 @@
 			clock-names = "spi", "spi_busclk0";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi1_bus>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
@@ -652,12 +653,13 @@
 			clock-names = "spi", "spi_busclk0";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi2_bus>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
 		pwm: pwm@139d0000 {
 			compatible = "samsung,exynos4210-pwm";
-			reg = <0x139D0000 0x1000>;
+			reg = <0x139d0000 0x1000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
@@ -712,7 +714,7 @@
 
 		tmu: tmu@100c0000 {
 			interrupt-parent = <&combiner>;
-			reg = <0x100C0000 0x100>;
+			reg = <0x100c0000 0x100>;
 			interrupts = <2 4>;
 			status = "disabled";
 			#thermal-sensor-cells = <0>;
@@ -739,7 +741,7 @@
 
 		hdmi: hdmi@12d00000 {
 			compatible = "samsung,exynos4210-hdmi";
-			reg = <0x12D00000 0x70000>;
+			reg = <0x12d00000 0x70000>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
 				      "sclk_hdmiphy", "mout_hdmi";
@@ -756,7 +758,7 @@
 
 		hdmicec: cec@100b0000 {
 			compatible = "samsung,s5p-cec";
-			reg = <0x100B0000 0x200>;
+			reg = <0x100b0000 0x200>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_HDMI_CEC>;
 			clock-names = "hdmicec";
@@ -770,7 +772,7 @@
 		mixer: mixer@12c10000 {
 			compatible = "samsung,exynos4210-mixer";
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
+			reg = <0x12c10000 0x2100>, <0x12c00000 0x300>;
 			power-domains = <&pd_tv>;
 			iommus = <&sysmmu_tv>;
 			status = "disabled";
@@ -902,7 +904,7 @@
 
 		sysmmu_tv: sysmmu@12e20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12E20000 0x1000>;
+			reg = <0x12e20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 4>;
 			clock-names = "sysmmu", "master";
@@ -913,7 +915,7 @@
 
 		sysmmu_fimc0: sysmmu@11a20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A20000 0x1000>;
+			reg = <0x11a20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 2>;
 			clock-names = "sysmmu", "master";
@@ -924,7 +926,7 @@
 
 		sysmmu_fimc1: sysmmu@11a30000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A30000 0x1000>;
+			reg = <0x11a30000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 3>;
 			clock-names = "sysmmu", "master";
@@ -935,7 +937,7 @@
 
 		sysmmu_fimc2: sysmmu@11a40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A40000 0x1000>;
+			reg = <0x11a40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 4>;
 			clock-names = "sysmmu", "master";
@@ -946,7 +948,7 @@
 
 		sysmmu_fimc3: sysmmu@11a50000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A50000 0x1000>;
+			reg = <0x11a50000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 5>;
 			clock-names = "sysmmu", "master";
@@ -957,7 +959,7 @@
 
 		sysmmu_jpeg: sysmmu@11a60000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A60000 0x1000>;
+			reg = <0x11a60000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 6>;
 			clock-names = "sysmmu", "master";
@@ -968,7 +970,7 @@
 
 		sysmmu_rotator: sysmmu@12a30000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12A30000 0x1000>;
+			reg = <0x12a30000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 0>;
 			clock-names = "sysmmu", "master";
@@ -979,7 +981,7 @@
 
 		sysmmu_fimd0: sysmmu@11e20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11E20000 0x1000>;
+			reg = <0x11e20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 2>;
 			clock-names = "sysmmu", "master";
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
index bba85011ecc9..df229fb8a16b 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
@@ -25,6 +25,12 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_0;
+		mmc1 = &sdhci_2;
+		mmc2 = &sdhci_3;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -124,7 +130,7 @@
 		reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
 	};
 
-	i2c_max17042_fuel: i2c-gpio-0 {
+	i2c_max17042_fuel: i2c-9 {
 		compatible = "i2c-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -148,7 +154,7 @@
 		};
 	};
 
-	i2c_s5k5baf: i2c-gpio-1 {
+	i2c_s5k5baf: i2c-10 {
 		compatible = "i2c-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -178,6 +184,28 @@
 		};
 	};
 
+	i2c-11 {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sda-gpios = <&gpk1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpk1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+
+		touchscreen@20 {
+			compatible = "cypress,aries-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&gpl0>;
+			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+			vdd-supply = <&vtouchled_reg>;
+			vcc-supply = <&vtouch_reg>;
+			linux,keycodes = <KEY_MENU>, <KEY_BACK>;
+		};
+	};
+
 	spi-3 {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
@@ -201,8 +229,8 @@
 			power-on-delay = <10>;
 			reset-delay = <10>;
 
-			panel-width-mm = <90>;
-			panel-height-mm = <154>;
+			panel-width-mm = <56>;
+			panel-height-mm = <93>;
 
 			display-timings {
 				timing {
@@ -374,6 +402,23 @@
 	vusb_a-supply = <&vusbdac_reg>;
 };
 
+&i2c_1 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+
+	lis3dh: accelerometer@19 {
+		compatible = "st,lis3dh-accel";
+		reg = <0x19>;
+
+		mount-matrix = "0", "-1", "0",
+			       "1", "0", "0",
+			       "0", "0", "1";
+	};
+};
+
 &i2c_3 {
 	status = "okay";
 
@@ -507,7 +552,6 @@
 				regulator-name = "TOUCH_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
 			};
 
 			vpll_reg: LDO10 {
@@ -521,6 +565,14 @@
 				regulator-name = "VT_CAM_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+
+				/*
+				 * Force-enable this regulator; otherwise the
+				 * kernel hangs very early in the boot process
+				 * for about 12 seconds, without apparent
+				 * reason.
+				 */
+				regulator-always-on;
 			};
 
 			vcclcd_reg: LDO13 {
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/samsung/exynos4210-origen.dts
index 5f37b751f700..f1927ca15e08 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/samsung/exynos4210-origen.dts
@@ -30,6 +30,11 @@
 		       0x70000000 0x10000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_0;
+		mmc1 = &sdhci_2;
+	};
+
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
 		stdout-path = "serial2:115200n8";
@@ -85,7 +90,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		status {
+		led-status {
 			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
 			function = LED_FUNCTION_HEARTBEAT;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/samsung/exynos4210-pinctrl.dtsi
index 76f44ae0de46..70d268f9fcb1 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4210-pinctrl.dtsi
@@ -7,8 +7,8 @@
  * Copyright (c) 2011-2012 Linaro Ltd.
  *		www.linaro.org
  *
- * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
+ * Samsung's Exynos4210 SoC pin-mux and pin-config options are listed as device
+ * tree nodes in this file.
  */
 
 #include "exynos-pinctrl.h"
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/samsung/exynos4210-smdkv310.dts
index a5dfd7fd49b3..18f4f494093b 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/samsung/exynos4210-smdkv310.dts
@@ -25,6 +25,10 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_2;
+	};
+
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
 		stdout-path = "serial1:115200n8";
@@ -84,7 +88,7 @@
 &keypad {
 	samsung,keypad-num-rows = <2>;
 	samsung,keypad-num-columns = <8>;
-	linux,keypad-no-autorepeat;
+	linux,input-no-autorepeat;
 	wakeup-source;
 	pinctrl-names = "default";
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
@@ -203,7 +207,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "w25x80";
+		compatible = "winbond,w25x80", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
 
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/samsung/exynos4210-trats.dts
index b8e9dd23fc51..95e0e01b6ff6 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/samsung/exynos4210-trats.dts
@@ -20,10 +20,16 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000
-			0x60000000 0x10000000
-			0x70000000 0x10000000>;
+		reg = <0x40000000 0x10000000
+		       0x50000000 0x10000000
+		       0x60000000 0x10000000
+		       0x70000000 0x10000000>;
+	};
+
+	aliases {
+		mmc0 = &sdhci_0;
+		mmc1 = &sdhci_2;
+		mmc2 = &sdhci_3;
 	};
 
 	chosen {
@@ -144,8 +150,6 @@
 };
 
 &camera {
-	pinctrl-names = "default";
-	pinctrl-0 = <>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/samsung/exynos4210-universal_c210.dts
index 62bf335d5bed..bdc30f8cf748 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/samsung/exynos4210-universal_c210.dts
@@ -20,8 +20,14 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000>;
+		reg = <0x40000000 0x10000000
+		       0x50000000 0x10000000>;
+	};
+
+	aliases {
+		mmc0 = &sdhci_0;
+		mmc1 = &sdhci_2;
+		mmc2 = &sdhci_3;
 	};
 
 	chosen {
@@ -191,9 +197,6 @@
 
 &camera {
 	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <>;
 };
 
 &cpu0 {
@@ -516,7 +519,7 @@
 };
 
 &mct {
-	compatible = "none";
+	status = "disabled";
 };
 
 &mdma1 {
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/samsung/exynos4210.dtsi
index 2c25cc37934e..510e8665d1a2 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4210.dtsi
@@ -28,6 +28,151 @@
 		pinctrl2 = &pinctrl_2;
 	};
 
+	bus_acp: bus-acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_ACP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_acp_opp_table>;
+		status = "disabled";
+
+		bus_acp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+		};
+	};
+
+	bus_display: bus-display {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK160>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_display_opp_table>;
+		status = "disabled";
+
+		bus_display_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+		};
+	};
+
+	bus_dmc: bus-dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+
+		bus_dmc_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+				opp-microvolt = <1025000>;
+			};
+			opp-267000000 {
+				opp-hz = /bits/ 64 <267000000>;
+				opp-microvolt = <1050000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <1150000>;
+				opp-suspend;
+			};
+		};
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK133>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_fsys_opp_table>;
+		status = "disabled";
+
+		bus_fsys_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-10000000 {
+				opp-hz = /bits/ 64 <10000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+		};
+	};
+
+	bus_lcd0: bus-lcd0 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK200>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_leftbus: bus-leftbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_SCLK_MFC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peri: bus-peri {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK100>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peri_opp_table>;
+		status = "disabled";
+
+		bus_peri_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-5000000 {
+				opp-hz = /bits/ 64 <5000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+	};
+
+	bus_rightbus: bus-rightbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDR>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -82,6 +227,22 @@
 		};
 	};
 
+	bus_leftbus_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-suspend;
+		};
+	};
+
 	soc: soc {
 		sysram: sram@2020000 {
 			compatible = "mmio-sram";
@@ -103,7 +264,7 @@
 
 		pd_lcd1: power-domain@10023ca0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
+			reg = <0x10023ca0 0x20>;
 			#power-domain-cells = <0>;
 			label = "LCD1";
 		};
@@ -195,7 +356,7 @@
 
 		sysmmu_g2d: sysmmu@12a20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12A20000 0x1000>;
+			reg = <0x12a20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 7>;
 			clock-names = "sysmmu", "master";
@@ -214,167 +375,6 @@
 			power-domains = <&pd_lcd1>;
 			#iommu-cells = <0>;
 		};
-
-		bus_dmc: bus-dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_acp: bus-acp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_ACP>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_acp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_peri: bus-peri {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK100>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_peri_opp_table>;
-			status = "disabled";
-		};
-
-		bus_fsys: bus-fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK133>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_opp_table>;
-			status = "disabled";
-		};
-
-		bus_display: bus-display {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_display_opp_table>;
-			status = "disabled";
-		};
-
-		bus_lcd0: bus-lcd0 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK200>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_leftbus: bus-leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_rightbus: bus-rightbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDR>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mfc: bus-mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_SCLK_MFC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_dmc_opp_table: opp-table1 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <1025000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-				opp-microvolt = <1050000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <1150000>;
-				opp-suspend;
-			};
-		};
-
-		bus_acp_opp_table: opp-table2 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_peri_opp_table: opp-table3 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-5000000 {
-				opp-hz = /bits/ 64 <5000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
-
-		bus_fsys_opp_table: opp-table4 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-10000000 {
-				opp-hz = /bits/ 64 <10000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-		};
-
-		bus_display_opp_table: opp-table5 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-		};
-
-		bus_leftbus_opp_table: opp-table6 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-suspend;
-			};
-		};
 	};
 };
 
@@ -391,9 +391,16 @@
 };
 
 &cpu_thermal {
-	polling-delay-passive = <0>;
-	polling-delay = <0>;
-	thermal-sensors = <&tmu 0>;
+	/*
+	 * Exynos 4210 supports thermal interrupts, but only for the rising
+	 * threshold.  This means that polling is not needed for preventing
+	 * overheating, but only for decreasing cooling when possible. Hence we
+	 * poll with a high delay.  Ideally, we would disable polling for the
+	 * first trip point, but this isn't really possible without outrageous
+	 * hacks.
+	 */
+	polling-delay-passive = <5000>;
+	polling-delay = <5000>;
 };
 
 &gic {
diff --git a/arch/arm/boot/dts/samsung/exynos4212-tab3-3g8.dts b/arch/arm/boot/dts/samsung/exynos4212-tab3-3g8.dts
new file mode 100644
index 000000000000..d96b2dd44608
--- /dev/null
+++ b/arch/arm/boot/dts/samsung/exynos4212-tab3-3g8.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4212 based Galaxy Tab 3 8.0 3G board device tree
+ * source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4212-tab3.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab 3 8.0 3G (SM-T311) based on Exynos4212";
+	compatible = "samsung,t311", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
+	chassis-type = "tablet";
+};
+
+/* Pin control sleep state overrides */
+&sleep0 {
+	PIN_SLP(gpb-5, INPUT, UP);
+};
+
+&sleep1 {
+	PIN_SLP(gpl0-0, OUT0, NONE);
+	PIN_SLP(gpl1-0, OUT0, NONE);
+	PIN_SLP(gpl2-4, OUT0, NONE);
+	PIN_SLP(gpm3-3, OUT1, NONE);
+};
diff --git a/arch/arm/boot/dts/samsung/exynos4212-tab3-lte8.dts b/arch/arm/boot/dts/samsung/exynos4212-tab3-lte8.dts
new file mode 100644
index 000000000000..bbb398eca7b0
--- /dev/null
+++ b/arch/arm/boot/dts/samsung/exynos4212-tab3-lte8.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4212 based Galaxy Tab 3 8.0 LTE board device tree
+ * source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4212-tab3.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab 3 8.0 LTE (SM-T315) based on Exynos4212";
+	compatible = "samsung,t315", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
+	chassis-type = "tablet";
+};
+
+/* Pin control sleep state overrides */
+&sleep0 {
+	PIN_SLP(gpa0-4, INPUT, UP);
+	PIN_SLP(gpa0-5, INPUT, UP);
+
+	PIN_SLP(gpb-5, INPUT, UP);
+
+	PIN_SLP(gpc0-0, PREV, NONE);
+	PIN_SLP(gpc1-3, INPUT, NONE);
+
+	PIN_SLP(gpf1-6, INPUT, NONE);
+	PIN_SLP(gpf2-2, PREV, NONE);
+};
+
+&sleep1 {
+	PIN_SLP(gpl0-0, PREV, NONE);
+
+	PIN_SLP(gpl1-0, PREV, NONE);
+
+	PIN_SLP(gpl2-1, INPUT, DOWN);
+	PIN_SLP(gpl2-2, INPUT, DOWN);
+	PIN_SLP(gpl2-4, OUT0, NONE);
+	PIN_SLP(gpl2-5, PREV, NONE);
+
+	PIN_SLP(gpm3-3, OUT1, NONE);
+};
diff --git a/arch/arm/boot/dts/samsung/exynos4212-tab3-wifi8.dts b/arch/arm/boot/dts/samsung/exynos4212-tab3-wifi8.dts
new file mode 100644
index 000000000000..54cb01703b60
--- /dev/null
+++ b/arch/arm/boot/dts/samsung/exynos4212-tab3-wifi8.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4212 based Galaxy Tab 3 8.0 WiFi board device tree
+ * source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4212-tab3.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab 3 8.0 WiFi (SM-T310) based on Exynos4212";
+	compatible = "samsung,t310", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
+	chassis-type = "tablet";
+};
+
+&i2c_lightsensor {
+	status = "okay";
+
+	lightsensor@10 {
+		compatible = "capella,cm3323";
+		reg = <0x10>;
+	};
+};
diff --git a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
new file mode 100644
index 000000000000..12b7f252b24d
--- /dev/null
+++ b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
@@ -0,0 +1,1339 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4212 based Galaxy Tab 3 board common source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4212.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "exynos-pinctrl.h"
+
+/ {
+	compatible = "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+
+		/*
+		 * Technically 1.5GB is available, but the latter 512MB is handled
+		 * in a special way by downstream (every second page is skipped),
+		 * and thus doesn't initialize correctly on mainline. Only 1020M is
+		 * used for now.
+		 */
+		reg = <0x40000000 0x3fc00000>;
+	};
+
+	aliases {
+		mmc0 = &mshc_0;   /* Internal storage */
+		mmc1 = &sdhci_2;  /* SD card */
+		mmc2 = &sdhci_3;  /* WiFi */
+	};
+
+	chosen {
+		stdout-path = &serial_2;
+
+		/* Default S-BOOT bootloader loads initramfs here */
+		linux,initrd-start = <0x42000000>;
+		linux,initrd-end = <0x42800000>;
+
+		/*
+		 * Stock bootloader provides incorrect memory size in ATAG_MEM;
+		 * override it here
+		 */
+		linux,usable-memory-range = <0x40000000 0x3fc00000>;
+	};
+
+	firmware@204f000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0204F000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
+
+		key-power {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		key-up {
+			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume down";
+			debounce-interval = <10>;
+		};
+
+		key-down {
+			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume up";
+			debounce-interval = <10>;
+		};
+
+		key-home {
+			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			label = "home";
+			debounce-interval = <10>;
+		};
+
+		switch-hall-sensor {
+			gpios = <&gpx2 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			label = "hall effect sensor";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	led-touchkeys {
+		compatible = "regulator-led";
+		vled-supply = <&ldo20_reg>;
+		default-state = "off";
+		function = LED_FUNCTION_KBD_BACKLIGHT;
+		color = <LED_COLOR_ID_WHITE>;
+	};
+
+	i2c_max77693: i2c-9 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@66 {
+			compatible = "maxim,max77693";
+			reg = <0x66>;
+			interrupt-parent = <&gpx1>;
+			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77693_irq>;
+
+			regulators {
+				esafeout1_reg: ESAFEOUT1 {
+					regulator-name = "ESAFEOUT1";
+					regulator-boot-on;
+				};
+
+				esafeout2_reg: ESAFEOUT2 {
+					regulator-name = "ESAFEOUT2";
+				};
+
+				charger_reg: CHARGER {
+					regulator-name = "CHARGER";
+					regulator-min-microamp = <60000>;
+					regulator-max-microamp = <2580000>;
+					regulator-boot-on;
+				};
+			};
+
+			charger {
+				compatible = "maxim,max77693-charger";
+
+				maxim,constant-microvolt = <4350000>;
+				maxim,min-system-microvolt = <3600000>;
+				maxim,thermal-regulation-celsius = <100>;
+				maxim,battery-overcurrent-microamp = <3500000>;
+				maxim,charge-input-threshold-microvolt = <4300000>;
+			};
+		};
+	};
+
+	i2c_max77693_fuel: i2c-10 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fuel-gauge@36 {
+			compatible = "maxim,max17050";
+			reg = <0x36>;
+			interrupt-parent = <&gpx2>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77693_fuel_irq>;
+
+			maxim,over-heat-temp = <500>;
+			maxim,over-volt = <4500>;
+		};
+	};
+
+	i2c_magnetometer: i2c-11 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		magnetometer@2e {
+			compatible = "yamaha,yas532";
+			reg = <0x2e>;
+			iovdd-supply = <&ldo3_reg>;
+			mount-matrix = "-1", "0", "0",
+					  "0", "1", "0",
+					  "0", "0", "-1";
+		};
+	};
+
+	i2c_lightsensor: i2c-12 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		/* WiFi model uses CM3323, 3G/LTE use CM36653 */
+	};
+
+	i2c_bl: i2c-13 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpm4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpm4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		backlight: backlight@2c {
+			compatible = "ti,lp8556";
+			reg = <0x2c>;
+
+			bl-name = "lcd-bl";
+			dev-ctrl = /bits/ 8 <0x80>;
+			init-brt = /bits/ 8 <0x78>; /* 120 */
+
+			power-supply = <&vbatt_reg>;
+			enable-supply = <&backlight_reset_supply>;
+
+			pwms = <&pwm 1 78770 0>;
+			pwm-names = "lp8556";
+
+			rom-a3h {
+				rom-addr = /bits/ 8 <0xa3>;
+				rom-val = /bits/ 8 <0x5e>;
+			};
+
+			rom-a5h {
+				rom-addr = /bits/ 8 <0xa5>;
+				rom-val = /bits/ 8 <0x34>;
+			};
+
+			rom-a7h {
+				rom-addr = /bits/ 8 <0xa7>;
+				rom-val = /bits/ 8 <0xfa>;
+			};
+		};
+	};
+
+	vbatt_reg: voltage-regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBATT";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	backlight_reset_supply: voltage-regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "BACKLIGHT_ENVDDIO";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_reset>;
+		gpio = <&gpm0 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	display_3v3_supply: voltage-regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "DISPLAY_3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_en>;
+		gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; /* LCD_EN */
+		enable-active-high;
+	};
+
+	mic_bias_reg: voltage-regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "MICBIAS_LDO_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	submic_bias_reg: voltage-regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "SUB_MICBIAS_LDO_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	earmic_bias_reg: voltage-regulator-6 {
+		compatible = "regulator-fixed";
+		regulator-name = "EAR_MICBIAS_LDO_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound: sound {
+		compatible = "samsung,midas-audio";
+		model = "TAB3";
+		mic-bias-supply = <&mic_bias_reg>;
+		submic-bias-supply = <&submic_bias_reg>;
+
+		lineout-sel-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
+
+		headset-mic-bias-supply = <&earmic_bias_reg>;
+		headset-detect-gpios = <&gpx0 4 GPIO_ACTIVE_LOW>;
+		headset-key-gpios = <&gpx3 6 GPIO_ACTIVE_LOW>;
+		samsung,headset-4pole-threshold-microvolt = <710 2000>;
+		samsung,headset-button-threshold-microvolt = <0 130 260>;
+		io-channel-names = "headset-detect";
+		io-channels = <&adc 0>;
+
+		audio-routing = "HP", "HPOUT1L",
+				"HP", "HPOUT1R",
+
+				"SPK", "SPKOUTLN",
+				"SPK", "SPKOUTLP",
+				"SPK", "SPKOUTRN",
+				"SPK", "SPKOUTRP",
+
+				"RCV", "HPOUT2N",
+				"RCV", "HPOUT2P",
+
+				"LINE", "LINEOUT2N",
+				"LINE", "LINEOUT2P",
+
+				"HDMI", "LINEOUT1N",
+				"HDMI", "LINEOUT1P",
+
+				"IN2LP:VXRN", "MICBIAS1",
+				"IN2LN", "MICBIAS1",
+				"Main Mic", "MICBIAS1",
+
+				"IN1RP", "MICBIAS2",
+				"IN1RN", "MICBIAS2",
+				"Sub Mic", "MICBIAS2",
+
+				"IN1LP", "Headset Mic",
+				"IN1LN", "Headset Mic";
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&wm1811>;
+		};
+	};
+
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
+		clocks = <&s5m8767_osc S2MPS11_CLK_BT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&bus_acp {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_c2c {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_display {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_leftbus {
+	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+	vdd-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_peri {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_rightbus {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>;
+		};
+		map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>;
+		};
+	};
+};
+
+&dsi_0 {
+	vddcore-supply = <&ldo8_reg>;
+	vddio-supply = <&ldo10_reg>;
+	samsung,burst-clock-frequency = <500000000>;
+	samsung,esc-clock-frequency = <20000000>;
+	samsung,pll-clock-frequency = <24000000>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "samsung,lsl080al02", "samsung,s6d7aa0";
+		reg = <0>;
+		power-supply = <&display_3v3_supply>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_nrst>;
+		reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>;
+		backlight = <&backlight>;
+	};
+};
+
+&exynos_usbphy {
+	vbus-supply = <&esafeout1_reg>;
+	status = "okay";
+};
+
+&fimd {
+	samsung,invert-vclk;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&buck4_reg>;
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo15_reg>;
+	vusb_a-supply = <&ldo12_reg>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c_1 {
+	pinctrl-0 = <&i2c1_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	lis3dh: accelerometer@19 {
+		/* K2DH seems to be the same as lis2dh12 in terms of registers */
+		compatible = "st,lis2dh12-accel";
+		reg = <0x19>;
+
+		interrupt-parent = <&gpx0>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&ldo17_reg>;
+		vddio-supply = <&ldo3_reg>;
+
+		mount-matrix = "-1", "0", "0",
+				  "0", "1", "0",
+				  "0", "0", "-1";
+	};
+};
+
+&i2c_3 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	touchscreen@48 {
+		/* MELFAS MMS252, using MMS114 compatible for now */
+		compatible = "melfas,mms114";
+		reg = <0x48>;
+		interrupt-parent = <&gpb>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <1280>;
+		avdd-supply = <&ldo21_reg>;
+		vdd-supply = <&ldo25_reg>;
+		linux,keycodes = <KEY_MENU KEY_BACK>;
+	};
+};
+
+&i2c_4 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c4_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	wm1811: audio-codec@1a {
+		compatible = "wlf,wm1811";
+		reg = <0x1a>;
+		clocks = <&pmu_system_controller 0>,
+			 <&s5m8767_osc S2MPS11_CLK_BT>;
+		clock-names = "MCLK1", "MCLK2";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		#sound-dai-cells = <0>;
+
+		wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0
+			0x0 0x8000 0x0 0x0 0x0>;
+		wlf,micbias-cfg = <0x25 0x2f>;
+
+		wlf,lineout1-feedback;
+		wlf,lineout1-se;
+		wlf,lineout2-se;
+		wlf,ldoena-always-driven;
+
+		AVDD2-supply = <&ldo3_reg>;
+		CPVDD-supply = <&ldo3_reg>;
+		DBVDD1-supply = <&ldo3_reg>;
+		DBVDD2-supply = <&ldo3_reg>;
+		DBVDD3-supply = <&ldo3_reg>;
+		SPKVDD1-supply = <&vbatt_reg>;
+		SPKVDD2-supply = <&vbatt_reg>;
+		wlf,ldo1ena-gpios = <&gpm4 4 GPIO_ACTIVE_HIGH>;
+		wlf,ldo2ena-gpios = <&gpm4 4 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c_7 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c7_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	s5m8767: pmic@66 {
+		compatible = "samsung,s5m8767-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+		wakeup-source;
+
+		s5m8767,pmic-buck-default-dvs-idx = <1>;
+
+		s5m8767,pmic-buck-dvs-gpios = <&gpm3 0 GPIO_ACTIVE_HIGH>,
+						 <&gpm3 1 GPIO_ACTIVE_HIGH>,
+						 <&gpm3 2 GPIO_ACTIVE_HIGH>;
+
+		s5m8767,pmic-buck-ds-gpios = <&gpf3 1 GPIO_ACTIVE_HIGH>,
+						 <&gpf3 2 GPIO_ACTIVE_HIGH>,
+						 <&gpf3 3 GPIO_ACTIVE_HIGH>;
+
+		s5m8767,pmic-buck2-dvs-voltage = <1100000>, <1100000>,
+						<1100000>, <1100000>,
+						<1100000>, <1100000>,
+						<1100000>, <1100000>;
+
+		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+						<1100000>, <1100000>,
+						<1100000>, <1100000>,
+						<1100000>, <1100000>;
+
+		s5m8767,pmic-buck4-dvs-voltage = <1100000>, <1100000>,
+						<1100000>, <1100000>,
+						<1100000>, <1100000>,
+						<1100000>, <1100000>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VALIVE_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VM1M2_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VCC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VCC_3.3V_MHL";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				op_mode = <1>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VMIPI_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				op_mode = <3>;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VSIL_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				op_mode = <1>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <3>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VUOTG_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				op_mode = <1>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VCC_1.8V_MHL";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VHSIC_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				op_mode = <1>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VCC_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>;
+				regulator-always-on;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VLED_IC_1.9V";
+				regulator-min-microvolt = <1900000>;
+				regulator-max-microvolt = <1900000>;
+				op_mode = <1>;
+				regulator-always-on;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VTOUCH_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				op_mode = <1>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "TSP_VDD_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				op_mode = <1>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "5M_AF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <3>;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "LEDA_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "TSP_VDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "CAM_IO_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "VTCAM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_INT";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_G3D";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VMEM_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt	= <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "CAM_ISP_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				op_mode = <1>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		s5m8767_osc: clocks {
+			compatible = "samsung,s5m8767-clk";
+			#clock-cells = <1>;
+			clock-output-names = "en32khz_ap",
+					     "en32khz_cp",
+					     "en32khz_bt";
+		};
+	};
+};
+
+&i2s0 {
+	pinctrl-0 = <&i2s0_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mshc_0 {
+	broken-cd;
+	non-removable;
+	card-detect-delay = <200>;
+	vmmc-supply = <&ldo22_reg>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <0>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+	pinctrl-names = "default";
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	status = "okay";
+};
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep0>;
+
+	lcd_en: lcd-en-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	lcd_nrst: lcd-nrst-pins {
+		samsung,pins = "gpf0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	s5m8767_ds: s5m8767-ds-pins {
+		samsung,pins = "gpf3-1", "gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	sleep0: sleep-state {
+		PIN_SLP(gpa0-0, INPUT, NONE);
+		PIN_SLP(gpa0-1, OUT0, NONE);
+		PIN_SLP(gpa0-2, INPUT, NONE);
+		PIN_SLP(gpa0-3, INPUT, UP);
+		PIN_SLP(gpa0-4, INPUT, DOWN);
+		PIN_SLP(gpa0-5, INPUT, DOWN);
+		PIN_SLP(gpa0-6, INPUT, DOWN);
+		PIN_SLP(gpa0-7, INPUT, DOWN);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, INPUT, DOWN);
+		PIN_SLP(gpa1-2, INPUT, DOWN);
+		PIN_SLP(gpa1-3, INPUT, DOWN);
+		PIN_SLP(gpa1-4, INPUT, DOWN);
+		PIN_SLP(gpa1-5, INPUT, DOWN);
+
+		PIN_SLP(gpb-0, INPUT, NONE);
+		PIN_SLP(gpb-1, INPUT, NONE);
+		PIN_SLP(gpb-2, INPUT, NONE);
+		PIN_SLP(gpb-3, INPUT, NONE);
+		PIN_SLP(gpb-4, INPUT, DOWN);
+		PIN_SLP(gpb-5, INPUT, DOWN);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, INPUT, DOWN);
+
+		PIN_SLP(gpc0-0, INPUT, DOWN);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, INPUT, NONE);
+		PIN_SLP(gpc0-3, INPUT, NONE);
+		PIN_SLP(gpc0-4, INPUT, NONE);
+
+		PIN_SLP(gpc1-0, INPUT, DOWN);
+		PIN_SLP(gpc1-1, INPUT, DOWN);
+		PIN_SLP(gpc1-2, INPUT, DOWN);
+		PIN_SLP(gpc1-3, INPUT, DOWN);
+		PIN_SLP(gpc1-4, INPUT, DOWN);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, OUT0, NONE);
+		PIN_SLP(gpd0-2, INPUT, NONE);
+		PIN_SLP(gpd0-3, INPUT, NONE);
+
+		PIN_SLP(gpd1-0, INPUT, DOWN);
+		PIN_SLP(gpd1-1, INPUT, DOWN);
+		PIN_SLP(gpd1-2, INPUT, NONE);
+		PIN_SLP(gpd1-3, INPUT, NONE);
+
+		PIN_SLP(gpf0-0, INPUT, DOWN);
+		PIN_SLP(gpf0-1, INPUT, DOWN);
+		PIN_SLP(gpf0-2, INPUT, DOWN);
+		PIN_SLP(gpf0-3, INPUT, DOWN);
+		PIN_SLP(gpf0-4, OUT0, NONE);
+		PIN_SLP(gpf0-5, OUT0, NONE);
+		PIN_SLP(gpf0-6, INPUT, DOWN);
+		PIN_SLP(gpf0-7, INPUT, DOWN);
+
+		PIN_SLP(gpf1-0, INPUT, DOWN);
+		PIN_SLP(gpf1-1, INPUT, DOWN);
+		PIN_SLP(gpf1-2, INPUT, DOWN);
+		PIN_SLP(gpf1-3, INPUT, DOWN);
+		PIN_SLP(gpf1-4, INPUT, DOWN);
+		PIN_SLP(gpf1-5, INPUT, DOWN);
+		PIN_SLP(gpf1-6, INPUT, DOWN);
+		PIN_SLP(gpf1-7, INPUT, DOWN);
+
+		PIN_SLP(gpf2-0, INPUT, DOWN);
+		PIN_SLP(gpf2-1, INPUT, DOWN);
+		PIN_SLP(gpf2-2, INPUT, DOWN);
+		PIN_SLP(gpf2-3, INPUT, DOWN);
+		PIN_SLP(gpf2-4, INPUT, DOWN);
+		PIN_SLP(gpf2-5, INPUT, DOWN);
+		PIN_SLP(gpf2-6, INPUT, DOWN);
+		PIN_SLP(gpf2-7, INPUT, DOWN);
+
+		PIN_SLP(gpf3-0, INPUT, DOWN);
+		PIN_SLP(gpf3-1, INPUT, DOWN);
+		PIN_SLP(gpf3-2, INPUT, DOWN);
+		PIN_SLP(gpf3-3, INPUT, DOWN);
+		PIN_SLP(gpf3-4, PREV, NONE);
+		PIN_SLP(gpf3-5, OUT0, DOWN);
+
+		PIN_SLP(gpj0-0, INPUT, DOWN);
+		PIN_SLP(gpj0-1, INPUT, DOWN);
+		PIN_SLP(gpj0-2, INPUT, DOWN);
+		PIN_SLP(gpj0-3, OUT0, NONE);
+		PIN_SLP(gpj0-4, INPUT, DOWN);
+		PIN_SLP(gpj0-5, INPUT, DOWN);
+		PIN_SLP(gpj0-6, OUT0, NONE);
+		PIN_SLP(gpj0-7, OUT0, NONE);
+
+		PIN_SLP(gpj1-0, OUT0, NONE);
+		PIN_SLP(gpj1-1, INPUT, DOWN);
+		PIN_SLP(gpj1-2, PREV, NONE);
+		PIN_SLP(gpj1-3, INPUT, DOWN);
+		PIN_SLP(gpj1-4, INPUT, DOWN);
+	};
+};
+
+&pinctrl_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep1>;
+
+	bt_shutdown: bt-shutdown-pins {
+		samsung,pins = "gpl0-6";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_host_wakeup: bt-host-wakeup-pins {
+		samsung,pins = "gpx2-6";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_device_wakeup: bt-device-wakeup-pins {
+		samsung,pins = "gpx3-1";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	backlight_reset: backlight-reset-pins {
+		samsung,pins = "gpm0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	gpio_keys: gpio-keys-pins {
+		samsung,pins = "gpx1-2", "gpx2-2", "gpx2-4", "gpx2-7", "gpx3-3";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max77693_irq: max77693-irq-pins {
+		samsung,pins = "gpx1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	max77693_fuel_irq: max77693-fuel-irq-pins {
+		samsung,pins = "gpx2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	sdhci2_cd: sdhci2-cd-irq-pins {
+		samsung,pins = "gpx3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	s5m8767_dvs: s5m8767-dvs-pins {
+		samsung,pins = "gpm3-0", "gpm3-1", "gpm3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	s5m8767_irq: s5m8767-irq-pins {
+		samsung,pins = "gpx0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	sleep1: sleep-state {
+		PIN_SLP(gpk0-0, PREV, NONE);
+		PIN_SLP(gpk0-1, PREV, NONE);
+		PIN_SLP(gpk0-2, PREV, NONE);
+		PIN_SLP(gpk0-3, PREV, NONE);
+		PIN_SLP(gpk0-4, PREV, NONE);
+		PIN_SLP(gpk0-5, PREV, NONE);
+		PIN_SLP(gpk0-6, PREV, NONE);
+
+		PIN_SLP(gpk1-0, INPUT, DOWN);
+		PIN_SLP(gpk1-1, INPUT, DOWN);
+		PIN_SLP(gpk1-2, INPUT, DOWN);
+		PIN_SLP(gpk1-3, PREV, NONE);
+		PIN_SLP(gpk1-4, PREV, NONE);
+		PIN_SLP(gpk1-5, PREV, NONE);
+		PIN_SLP(gpk1-6, PREV, NONE);
+
+		PIN_SLP(gpk2-0, INPUT, DOWN);
+		PIN_SLP(gpk2-1, INPUT, DOWN);
+		PIN_SLP(gpk2-2, INPUT, DOWN);
+		PIN_SLP(gpk2-3, INPUT, DOWN);
+		PIN_SLP(gpk2-4, INPUT, DOWN);
+		PIN_SLP(gpk2-5, INPUT, DOWN);
+		PIN_SLP(gpk2-6, INPUT, DOWN);
+
+		PIN_SLP(gpk3-0, OUT0, NONE);
+		PIN_SLP(gpk3-1, INPUT, NONE);
+		PIN_SLP(gpk3-2, INPUT, DOWN);
+		PIN_SLP(gpk3-3, INPUT, NONE);
+		PIN_SLP(gpk3-4, INPUT, NONE);
+		PIN_SLP(gpk3-5, INPUT, NONE);
+		PIN_SLP(gpk3-6, INPUT, NONE);
+
+		PIN_SLP(gpl0-0, INPUT, DOWN);
+		PIN_SLP(gpl0-1, INPUT, NONE);
+		PIN_SLP(gpl0-2, INPUT, NONE);
+		PIN_SLP(gpl0-3, INPUT, DOWN);
+		PIN_SLP(gpl0-4, INPUT, DOWN);
+		PIN_SLP(gpl0-6, PREV, NONE);
+
+		PIN_SLP(gpl1-0, INPUT, DOWN);
+		PIN_SLP(gpl1-1, OUT0, NONE);
+		PIN_SLP(gpl2-0, INPUT, DOWN);
+		PIN_SLP(gpl2-1, PREV, NONE);
+		PIN_SLP(gpl2-2, PREV, NONE);
+		PIN_SLP(gpl2-3, INPUT, DOWN);
+		PIN_SLP(gpl2-4, INPUT, DOWN);
+		PIN_SLP(gpl2-5, INPUT, DOWN);
+		PIN_SLP(gpl2-6, INPUT, DOWN);
+		PIN_SLP(gpl2-7, INPUT, DOWN);
+
+		PIN_SLP(gpm0-0, PREV, NONE);
+		PIN_SLP(gpm0-1, OUT0, NONE);
+		PIN_SLP(gpm0-2, INPUT, DOWN);
+		PIN_SLP(gpm0-3, INPUT, DOWN);
+		PIN_SLP(gpm0-4, INPUT, DOWN);
+		PIN_SLP(gpm0-5, INPUT, DOWN);
+		PIN_SLP(gpm0-6, INPUT, DOWN);
+		PIN_SLP(gpm0-7, INPUT, DOWN);
+
+		PIN_SLP(gpm1-0, INPUT, DOWN);
+		PIN_SLP(gpm1-1, INPUT, DOWN);
+		PIN_SLP(gpm1-2, INPUT, NONE);
+		PIN_SLP(gpm1-3, INPUT, NONE);
+		PIN_SLP(gpm1-4, INPUT, NONE);
+		PIN_SLP(gpm1-5, INPUT, NONE);
+		PIN_SLP(gpm1-6, OUT0, NONE);
+
+		PIN_SLP(gpm2-0, INPUT, NONE);
+		PIN_SLP(gpm2-1, INPUT, NONE);
+		PIN_SLP(gpm2-2, OUT0, NONE);
+		PIN_SLP(gpm2-3, INPUT, DOWN);
+		PIN_SLP(gpm2-4, INPUT, DOWN);
+
+		PIN_SLP(gpm3-0, PREV, NONE);
+		PIN_SLP(gpm3-1, PREV, NONE);
+		PIN_SLP(gpm3-2, PREV, NONE);
+		PIN_SLP(gpm3-3, INPUT, DOWN);
+		PIN_SLP(gpm3-4, INPUT, DOWN);
+		PIN_SLP(gpm3-5, PREV, NONE);
+		PIN_SLP(gpm3-6, INPUT, DOWN);
+		PIN_SLP(gpm3-7, OUT0, NONE);
+
+		PIN_SLP(gpm4-0, INPUT, DOWN);
+		PIN_SLP(gpm4-1, INPUT, DOWN);
+		PIN_SLP(gpm4-2, INPUT, DOWN);
+		PIN_SLP(gpm4-3, INPUT, DOWN);
+		PIN_SLP(gpm4-4, PREV, NONE);
+		PIN_SLP(gpm4-5, INPUT, NONE);
+		PIN_SLP(gpm4-6, INPUT, DOWN);
+		PIN_SLP(gpm4-7, INPUT, DOWN);
+
+		PIN_SLP(gpy0-0, INPUT, DOWN);
+		PIN_SLP(gpy0-1, INPUT, DOWN);
+		PIN_SLP(gpy0-2, INPUT, NONE);
+		PIN_SLP(gpy0-3, INPUT, NONE);
+		PIN_SLP(gpy0-4, INPUT, DOWN);
+		PIN_SLP(gpy0-5, INPUT, DOWN);
+
+		PIN_SLP(gpy1-0, INPUT, DOWN);
+		PIN_SLP(gpy1-1, INPUT, DOWN);
+		PIN_SLP(gpy1-2, INPUT, DOWN);
+		PIN_SLP(gpy1-3, INPUT, DOWN);
+
+		PIN_SLP(gpy2-0, PREV, NONE);
+		PIN_SLP(gpy2-1, INPUT, DOWN);
+		PIN_SLP(gpy2-2, INPUT, NONE);
+		PIN_SLP(gpy2-3, INPUT, NONE);
+		PIN_SLP(gpy2-4, INPUT, NONE);
+		PIN_SLP(gpy2-5, INPUT, NONE);
+
+		PIN_SLP(gpy3-0, INPUT, DOWN);
+		PIN_SLP(gpy3-1, INPUT, DOWN);
+		PIN_SLP(gpy3-2, INPUT, DOWN);
+		PIN_SLP(gpy3-3, INPUT, DOWN);
+		PIN_SLP(gpy3-4, INPUT, DOWN);
+		PIN_SLP(gpy3-5, INPUT, DOWN);
+		PIN_SLP(gpy3-6, INPUT, DOWN);
+		PIN_SLP(gpy3-7, INPUT, DOWN);
+
+		PIN_SLP(gpy4-0, INPUT, DOWN);
+		PIN_SLP(gpy4-1, INPUT, DOWN);
+		PIN_SLP(gpy4-2, INPUT, DOWN);
+		PIN_SLP(gpy4-3, INPUT, DOWN);
+		PIN_SLP(gpy4-4, INPUT, DOWN);
+		PIN_SLP(gpy4-5, INPUT, DOWN);
+		PIN_SLP(gpy4-6, INPUT, DOWN);
+		PIN_SLP(gpy4-7, INPUT, DOWN);
+
+		PIN_SLP(gpy5-0, INPUT, DOWN);
+		PIN_SLP(gpy5-1, INPUT, DOWN);
+		PIN_SLP(gpy5-2, INPUT, DOWN);
+		PIN_SLP(gpy5-3, INPUT, DOWN);
+		PIN_SLP(gpy5-4, INPUT, DOWN);
+		PIN_SLP(gpy5-5, INPUT, DOWN);
+		PIN_SLP(gpy5-6, INPUT, DOWN);
+		PIN_SLP(gpy5-7, INPUT, DOWN);
+
+		PIN_SLP(gpy6-0, INPUT, DOWN);
+		PIN_SLP(gpy6-1, INPUT, DOWN);
+		PIN_SLP(gpy6-2, INPUT, DOWN);
+		PIN_SLP(gpy6-3, INPUT, DOWN);
+		PIN_SLP(gpy6-4, INPUT, DOWN);
+		PIN_SLP(gpy6-5, INPUT, DOWN);
+		PIN_SLP(gpy6-6, INPUT, DOWN);
+		PIN_SLP(gpy6-7, INPUT, DOWN);
+	};
+};
+
+&pinctrl_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep2>;
+
+	sleep2: sleep-state {
+		PIN_SLP(gpz-0, INPUT, DOWN);
+		PIN_SLP(gpz-1, INPUT, DOWN);
+		PIN_SLP(gpz-2, INPUT, DOWN);
+		PIN_SLP(gpz-3, INPUT, DOWN);
+		PIN_SLP(gpz-4, INPUT, DOWN);
+		PIN_SLP(gpz-5, INPUT, DOWN);
+		PIN_SLP(gpz-6, INPUT, DOWN);
+	};
+};
+
+&pinctrl_3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep3>;
+
+	sleep3: sleep-state {
+		PIN_SLP(gpv0-0, INPUT, DOWN);
+		PIN_SLP(gpv0-1, INPUT, DOWN);
+		PIN_SLP(gpv0-2, INPUT, DOWN);
+		PIN_SLP(gpv0-3, INPUT, DOWN);
+		PIN_SLP(gpv0-4, INPUT, DOWN);
+		PIN_SLP(gpv0-5, INPUT, DOWN);
+		PIN_SLP(gpv0-6, INPUT, DOWN);
+		PIN_SLP(gpv0-7, INPUT, DOWN);
+
+		PIN_SLP(gpv1-0, INPUT, DOWN);
+		PIN_SLP(gpv1-1, INPUT, DOWN);
+		PIN_SLP(gpv1-2, INPUT, DOWN);
+		PIN_SLP(gpv1-3, INPUT, DOWN);
+		PIN_SLP(gpv1-4, INPUT, DOWN);
+		PIN_SLP(gpv1-5, INPUT, DOWN);
+		PIN_SLP(gpv1-6, INPUT, DOWN);
+		PIN_SLP(gpv1-7, INPUT, DOWN);
+
+		PIN_SLP(gpv2-0, INPUT, DOWN);
+		PIN_SLP(gpv2-1, INPUT, DOWN);
+		PIN_SLP(gpv2-2, INPUT, DOWN);
+		PIN_SLP(gpv2-3, INPUT, DOWN);
+		PIN_SLP(gpv2-4, INPUT, DOWN);
+		PIN_SLP(gpv2-5, INPUT, DOWN);
+		PIN_SLP(gpv2-6, INPUT, DOWN);
+		PIN_SLP(gpv2-7, INPUT, DOWN);
+
+		PIN_SLP(gpv3-0, INPUT, DOWN);
+		PIN_SLP(gpv3-1, INPUT, DOWN);
+		PIN_SLP(gpv3-2, INPUT, DOWN);
+		PIN_SLP(gpv3-3, INPUT, DOWN);
+		PIN_SLP(gpv3-4, INPUT, DOWN);
+		PIN_SLP(gpv3-5, INPUT, DOWN);
+		PIN_SLP(gpv3-6, INPUT, DOWN);
+		PIN_SLP(gpv3-7, INPUT, DOWN);
+
+		PIN_SLP(gpv4-0, INPUT, DOWN);
+		PIN_SLP(gpv4-1, INPUT, DOWN);
+	};
+};
+
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_XUSBXTI>;
+};
+
+&pwm {
+	pinctrl-0 = <&pwm1_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <1>;
+	status = "okay";
+};
+
+/*
+ * The internal RTC does not work; instead, the RTC provided by the
+ * S5M8766 PMIC is used. Disable the RTC to make sure the working
+ * one gets used.
+ *
+ * We add this node to avoid DTB check warnings, as the Exynos4 RTC
+ * requires two clocks, and only one is set up by default.
+ */
+&rtc {
+	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+	status = "disabled";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
+	pinctrl-names = "default";
+	vmmc-supply = <&ldo23_reg>;
+	status = "okay";
+};
+
+&sdhci_3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	non-removable;
+	bus-width = <4>;
+
+	mmc-pwrseq = <&wlan_pwrseq>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&serial_0 {
+	pinctrl-0 = <&uart0_data &uart0_fctl>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt"; /* BCM4334B0 */
+		pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
+		pinctrl-names = "default";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+		clocks = <&s5m8767_osc S2MPS11_CLK_BT>;
+	};
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&tmu {
+	vtmu-supply = <&ldo10_reg>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/samsung/exynos4212.dtsi b/arch/arm/boot/dts/samsung/exynos4212.dtsi
new file mode 100644
index 000000000000..aa984601ee06
--- /dev/null
+++ b/arch/arm/boot/dts/samsung/exynos4212.dtsi
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4212 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212
+ * based board files can include this file and provide values for board specific
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4212 SoC. As device tree coverage for Exynos4212 increases, additional
+ * nodes can be added to this file.
+ */
+
+#include "exynos4x12.dtsi"
+
+/ {
+	compatible = "samsung,exynos4212", "samsung,exynos4";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@a00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xa00>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@a01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xa01>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu0_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <987500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <200000>;
+			opp-suspend;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1037500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1087500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1137500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1187500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1250000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1287500>;
+			clock-latency-ns = <200000>;
+		};
+		cpu0_opp_1500: opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1350000>;
+			clock-latency-ns = <200000>;
+			turbo-mode;
+		};
+	};
+};
+
+&clock {
+	compatible = "samsung,exynos4212-clock";
+};
+
+&combiner {
+	samsung,combiner-nr = <18>;
+};
+
+&gic {
+	cpu-offset = <0x8000>;
+};
+
+&pmu {
+	interrupts = <2 2>, <3 2>;
+	interrupt-affinity = <&cpu0>, <&cpu1>;
+	status = "okay";
+};
+
+&pmu_system_controller {
+	compatible = "samsung,exynos4212-pmu", "simple-mfd", "syscon";
+};
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/samsung/exynos4412-galaxy-s3.dtsi
index 94122e9c6625..3248be990059 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4412-galaxy-s3.dtsi
@@ -53,7 +53,7 @@
 		enable-active-high;
 	};
 
-	i2c_ak8975: i2c-gpio-0 {
+	i2c_ak8975: i2c-13 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -68,7 +68,7 @@
 		};
 	};
 
-	i2c_cm36651: i2c-gpio-2 {
+	i2c_cm36651: i2c-14 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpf0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpf0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -173,36 +173,35 @@
 };
 
 &sound {
-	samsung,audio-routing =
-		"HP", "HPOUT1L",
-		"HP", "HPOUT1R",
+	audio-routing = "HP", "HPOUT1L",
+			"HP", "HPOUT1R",
 
-		"SPK", "SPKOUTLN",
-		"SPK", "SPKOUTLP",
-		"SPK", "SPKOUTRN",
-		"SPK", "SPKOUTRP",
+			"SPK", "SPKOUTLN",
+			"SPK", "SPKOUTLP",
+			"SPK", "SPKOUTRN",
+			"SPK", "SPKOUTRP",
 
-		"RCV", "HPOUT2N",
-		"RCV", "HPOUT2P",
+			"RCV", "HPOUT2N",
+			"RCV", "HPOUT2P",
 
-		"HDMI", "LINEOUT1N",
-		"HDMI", "LINEOUT1P",
+			"HDMI", "LINEOUT1N",
+			"HDMI", "LINEOUT1P",
 
-		"LINE", "LINEOUT2N",
-		"LINE", "LINEOUT2P",
+			"LINE", "LINEOUT2N",
+			"LINE", "LINEOUT2P",
 
-		"IN1LP", "MICBIAS1",
-		"IN1LN", "MICBIAS1",
-		"Main Mic", "MICBIAS1",
+			"IN1LP", "MICBIAS1",
+			"IN1LN", "MICBIAS1",
+			"Main Mic", "MICBIAS1",
 
-		"IN1RP", "Sub Mic",
-		"IN1RN", "Sub Mic",
+			"IN1RP", "Sub Mic",
+			"IN1RN", "Sub Mic",
 
-		"IN2LP:VXRN", "MICBIAS2",
-		"Headset Mic", "MICBIAS2",
+			"IN2LP:VXRN", "MICBIAS2",
+			"Headset Mic", "MICBIAS2",
 
-		"IN2RN", "FM In",
-		"IN2RP:VXRP", "FM In";
+			"IN2RN", "FM In",
+			"IN2RP:VXRP", "FM In";
 };
 
 &submic_bias_reg {
diff --git a/arch/arm/boot/dts/exynos4412-i9300.dts b/arch/arm/boot/dts/samsung/exynos4412-i9300.dts
index 61aca5798f38..b79d456e976d 100644
--- a/arch/arm/boot/dts/exynos4412-i9300.dts
+++ b/arch/arm/boot/dts/samsung/exynos4412-i9300.dts
@@ -18,7 +18,7 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x40000000>;
+		reg = <0x40000000 0x3fc00000>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos4412-i9305.dts b/arch/arm/boot/dts/samsung/exynos4412-i9305.dts
index 77083f1a8273..1048ef5d9bc3 100644
--- a/arch/arm/boot/dts/exynos4412-i9305.dts
+++ b/arch/arm/boot/dts/samsung/exynos4412-i9305.dts
@@ -11,7 +11,7 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
+		reg = <0x40000000 0x7fc00000>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/samsung/exynos4412-itop-elite.dts
index 202ab0fee3b7..ded232b04e0d 100644
--- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ b/arch/arm/boot/dts/samsung/exynos4412-itop-elite.dts
@@ -20,6 +20,10 @@
 	model = "TOPEET iTop 4412 Elite board based on Exynos4412";
 	compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4";
 
+	aliases {
+		mmc1 = &sdhci_2;
+	};
+
 	chosen {
 		bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=1 rootwait";
 		stdout-path = "serial2:115200n8";
@@ -182,7 +186,7 @@
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		clocks = <&pmu_system_controller 0>;
-		clock-names = "MCLK1";
+		clock-names = "mclk";
 		wlf,shared-lrclk;
 		#sound-dai-cells = <0>;
 	};
@@ -214,7 +218,7 @@
 	bus-width = <4>;
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
 	pinctrl-names = "default";
-	cd-gpio = <&gpx0 7 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&gpx0 7 GPIO_ACTIVE_LOW>;
 	cap-sd-highspeed;
 	vmmc-supply = <&ldo23_reg>;
 	vqmmc-supply = <&ldo17_reg>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/samsung/exynos4412-itop-scp-core.dtsi
index a67cb61e3cbb..7bc6968af9c3 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4412-itop-scp-core.dtsi
@@ -23,9 +23,13 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
+	aliases {
+		mmc0 = &mshc_0;
+	};
+
 	firmware@203f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0203F000 0x1000>;
+		reg = <0x0203f000 0x1000>;
 	};
 
 	fixed-rate-clocks {
@@ -476,6 +480,7 @@
 	vmmc-supply = <&buck9_reg>;
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
index b967397a46c5..05ddddb565ee 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
@@ -25,6 +25,9 @@
 	aliases {
 		i2c11 = &i2c_max77693;
 		i2c12 = &i2c_max77693_fuel;
+		mmc0 = &mshc_0;
+		mmc2 = &sdhci_2;
+		mmc3 = &sdhci_3;
 	};
 
 	chosen {
@@ -33,7 +36,7 @@
 
 	firmware@204f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
+		reg = <0x0204f000 0x1000>;
 	};
 
 	fixed-rate-clocks {
@@ -134,21 +137,21 @@
 
 		key-down {
 			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
-			linux,code = <114>;
+			linux,code = <KEY_VOLUMEDOWN>;
 			label = "volume down";
 			debounce-interval = <10>;
 		};
 
 		key-up {
 			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <115>;
+			linux,code = <KEY_VOLUMEUP>;
 			label = "volume up";
 			debounce-interval = <10>;
 		};
 
 		key-power {
 			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			label = "power";
 			debounce-interval = <10>;
 			wakeup-source;
@@ -156,14 +159,14 @@
 
 		key-ok {
 			gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
-			linux,code = <139>;
+			linux,code = <KEY_OK>;
 			label = "ok";
 			debounce-interval = <10>;
 			wakeup-source;
 		};
 	};
 
-	i2c_max77693: i2c-gpio-1 {
+	i2c_max77693: i2c-9 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -179,6 +182,38 @@
 			pinctrl-0 = <&max77693_irq>;
 			reg = <0x66>;
 
+			muic {
+				compatible = "maxim,max77693-muic";
+
+				connector {
+					compatible = "samsung,usb-connector-11pin",
+						     "usb-b-connector";
+					label = "micro-USB";
+					type = "micro";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							muic_to_usb: endpoint {
+								remote-endpoint = <&usb_to_muic>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							muic_to_mhl: endpoint {
+								remote-endpoint = <&mhl_to_muic>;
+							};
+						};
+					};
+				};
+			};
+
 			regulators {
 				esafeout1_reg: ESAFEOUT1 {
 					regulator-name = "ESAFEOUT1";
@@ -211,7 +246,7 @@
 		};
 	};
 
-	i2c_max77693_fuel: i2c-gpio-3 {
+	i2c_max77693_fuel: i2c-10 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -232,7 +267,7 @@
 		};
 	};
 
-	i2c-gpio-4 {
+	i2c-11 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -251,7 +286,7 @@
 		};
 	};
 
-	i2c-mhl {
+	i2c-12 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -273,9 +308,24 @@
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x39>;
 
-			port {
-				mhl_to_hdmi: endpoint {
-					remote-endpoint = <&hdmi_to_mhl>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					mhl_to_hdmi: endpoint {
+						remote-endpoint = <&hdmi_to_mhl>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					mhl_to_muic: endpoint {
+						remote-endpoint = <&muic_to_mhl>;
+					};
 				};
 			};
 		};
@@ -490,8 +540,7 @@
 	pinctrl-0 = <&fimc_is_uart>;
 	pinctrl-names = "default";
 	status = "okay";
-
-	};
+};
 
 &fimc_lite_0 {
 	status = "okay";
@@ -536,8 +585,16 @@
 &hsotg {
 	vusb_d-supply = <&ldo15_reg>;
 	vusb_a-supply = <&ldo12_reg>;
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	role-switch-default-mode = "peripheral";
+	usb-role-switch;
 	status = "okay";
+
+	port {
+		usb_to_muic: endpoint {
+			remote-endpoint = <&muic_to_usb>;
+		};
+	};
 };
 
 &i2c_0 {
@@ -585,8 +642,7 @@
 		/* CAM_B_CLKOUT */
 		clocks = <&camera 1>;
 		clock-names = "extclk";
-		samsung,camclk-out = <1>;
-		gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
 
 		port {
 			is_s5k6a3_ep: endpoint {
@@ -646,8 +702,8 @@
 		CPVDD-supply = <&vbatt_reg>;
 		SPKVDD1-supply = <&vbatt_reg>;
 		SPKVDD2-supply = <&vbatt_reg>;
-		wlf,ldo1ena = <&gpj0 4 0>;
-		wlf,ldo2ena = <&gpj0 4 0>;
+		wlf,ldo1ena-gpios = <&gpj0 4 GPIO_ACTIVE_HIGH>;
+		wlf,ldo2ena-gpios = <&gpj0 4 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -972,6 +1028,7 @@
 	samsung,dw-mshc-ciu-div = <0>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
+	mmc-ddr-1_8v;
 	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -981,7 +1038,7 @@
 
 &pmu_system_controller {
 	assigned-clocks = <&pmu_system_controller 0>;
-	assigned-clock-parents =  <&clock CLK_XUSBXTI>;
+	assigned-clock-parents = <&clock CLK_XUSBXTI>;
 };
 
 &pinctrl_0 {
diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/samsung/exynos4412-n710x.dts
index 9ae05b0d684c..eee1000dea92 100644
--- a/arch/arm/boot/dts/exynos4412-n710x.dts
+++ b/arch/arm/boot/dts/samsung/exynos4412-n710x.dts
@@ -9,7 +9,7 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
+		reg = <0x40000000 0x7fc00000>;
 	};
 
 	/* bootargs are passed in by bootloader */
@@ -76,34 +76,33 @@
 };
 
 &sound {
-	samsung,audio-routing =
-		"HP", "HPOUT1L",
-		"HP", "HPOUT1R",
+	audio-routing = "HP", "HPOUT1L",
+			"HP", "HPOUT1R",
 
-		"SPK", "SPKOUTLN",
-		"SPK", "SPKOUTLP",
+			"SPK", "SPKOUTLN",
+			"SPK", "SPKOUTLP",
 
-		"RCV", "HPOUT2N",
-		"RCV", "HPOUT2P",
+			"RCV", "HPOUT2N",
+			"RCV", "HPOUT2P",
 
-		"HDMI", "LINEOUT1N",
-		"HDMI", "LINEOUT1P",
+			"HDMI", "LINEOUT1N",
+			"HDMI", "LINEOUT1P",
 
-		"LINE", "LINEOUT2N",
-		"LINE", "LINEOUT2P",
+			"LINE", "LINEOUT2N",
+			"LINE", "LINEOUT2P",
 
-		"IN1LP", "MICBIAS2",
-		"IN1LN", "MICBIAS2",
-		"Headset Mic", "MICBIAS2",
+			"IN1LP", "MICBIAS2",
+			"IN1LN", "MICBIAS2",
+			"Headset Mic", "MICBIAS2",
 
-		"IN1RP", "Sub Mic",
-		"IN1RN", "Sub Mic",
+			"IN1RP", "Sub Mic",
+			"IN1RN", "Sub Mic",
 
-		"IN2LP:VXRN", "Main Mic",
-		"IN2LN", "Main Mic",
+			"IN2LP:VXRN", "Main Mic",
+			"IN2LN", "Main Mic",
 
-		"IN2RN", "FM In",
-		"IN2RP:VXRP", "FM In";
+			"IN2RN", "FM In",
+			"IN2RP:VXRP", "FM In";
 };
 
 &submic_bias_reg {
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/samsung/exynos4412-odroid-common.dtsi
index e7669b9e9edb..93ddbd4b0a18 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4412-odroid-common.dtsi
@@ -13,13 +13,18 @@
 #include "exynos-mfc-reserved-memory.dtsi"
 
 / {
+	aliases {
+		mmc0 = &mshc_0;
+		mmc2 = &sdhci_2;
+	};
+
 	chosen {
 		stdout-path = &serial_1;
 	};
 
 	firmware@204f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
+		reg = <0x0204f000 0x1000>;
 	};
 
 	gpio_keys: gpio-keys {
@@ -117,8 +122,6 @@
 
 &camera {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <>;
 };
 
 &clock {
@@ -533,6 +536,7 @@
 
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/samsung/exynos4412-odroidu3.dts
index a5ad88b897ff..b1b0916b1505 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/samsung/exynos4412-odroidu3.dts
@@ -23,7 +23,7 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x7FF00000>;
+		reg = <0x40000000 0x7ff00000>;
 	};
 
 	vbus_otg_reg: regulator-1 {
@@ -138,13 +138,12 @@
 	samsung,audio-widgets =
 		"Headphone", "Headphone Jack",
 		"Speakers", "Speakers";
-	samsung,audio-routing =
-		"Headphone Jack", "HPL",
-		"Headphone Jack", "HPR",
-		"Headphone Jack", "MICBIAS",
-		"IN1", "Headphone Jack",
-		"Speakers", "SPKL",
-		"Speakers", "SPKR";
+	audio-routing = "Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Headphone Jack", "MICBIAS",
+			"IN1", "Headphone Jack",
+			"Speakers", "SPKL",
+			"Speakers", "SPKR";
 };
 
 &spi_1 {
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/samsung/exynos4412-odroidx.dts
index 68d589e081bc..0eb8a2680a20 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/samsung/exynos4412-odroidx.dts
@@ -22,7 +22,7 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x3FF00000>;
+		reg = <0x40000000 0x3ff00000>;
 	};
 
 	leds {
@@ -135,9 +135,8 @@
 		"Headphone", "Headphone Jack",
 		"Microphone", "Mic Jack",
 		"Microphone", "DMIC";
-	samsung,audio-routing =
-		"Headphone Jack", "HPL",
-		"Headphone Jack", "HPR",
-		"IN1", "Mic Jack",
-		"Mic Jack", "MICBIAS";
+	audio-routing = "Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"IN1", "Mic Jack",
+			"Mic Jack", "MICBIAS";
 };
diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/samsung/exynos4412-odroidx2.dts
index f4b68c75c962..7be4cbdc4413 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx2.dts
+++ b/arch/arm/boot/dts/samsung/exynos4412-odroidx2.dts
@@ -17,6 +17,6 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x7FF00000>;
+		reg = <0x40000000 0x7ff00000>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/samsung/exynos4412-origen.dts
index 6db09dba07ff..10ab7bc90f50 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/samsung/exynos4412-origen.dts
@@ -25,13 +25,18 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
+	aliases {
+		mmc0 = &mshc_0;
+		mmc1 = &sdhci_2;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
 
 	firmware@203f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0203F000 0x1000>;
+		reg = <0x0203f000 0x1000>;
 	};
 
 	mmc_reg: regulator-0 {
@@ -95,7 +100,7 @@
 };
 
 &ehci {
-	samsung,vbus-gpio = <&gpx3 5 1>;
+	samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
 	phy-names = "hsic0", "hsic1";
@@ -448,7 +453,7 @@
 &keypad {
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <2>;
-	linux,keypad-no-autorepeat;
+	linux,input-no-autorepeat;
 	wakeup-source;
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	pinctrl-names = "default";
@@ -498,6 +503,7 @@
 
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos4412-p4note-n8010.dts b/arch/arm/boot/dts/samsung/exynos4412-p4note-n8010.dts
index 0932ec5866cc..0932ec5866cc 100644
--- a/arch/arm/boot/dts/exynos4412-p4note-n8010.dts
+++ b/arch/arm/boot/dts/samsung/exynos4412-p4note-n8010.dts
diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/samsung/exynos4412-p4note.dtsi
index 7a515b87bc7c..8d52aa13b862 100644
--- a/arch/arm/boot/dts/exynos4412-p4note.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4412-p4note.dtsi
@@ -23,7 +23,13 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
+		reg = <0x40000000 0x7fc00000>;
+	};
+
+	aliases {
+		mmc0 = &mshc_0;
+		mmc2 = &sdhci_2;
+		mmc3 = &sdhci_3;
 	};
 
 	chosen {
@@ -32,7 +38,7 @@
 
 	firmware@204f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
+		reg = <0x0204f000 0x1000>;
 	};
 
 	fixed-rate-clocks {
@@ -132,11 +138,9 @@
 		precharge-current-microamp = <250000>;
 		charge-term-current-microamp = <250000>;
 		constant-charge-voltage-max-microvolt = <4200000>;
-
-		power-supplies = <&power_supply>;
 	};
 
-	i2c-gpio-1 {
+	i2c-9 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -154,7 +158,7 @@
 		};
 	};
 
-	i2c-gpio-2 {
+	i2c-10 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -175,7 +179,7 @@
 		};
 	};
 
-	i2c-gpio-3 {
+	i2c-11 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpm4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpm4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -190,22 +194,20 @@
 			pinctrl-names = "default";
 			interrupt-parent = <&gpx0>;
 			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-controller;
-			irq-trigger = <0x1>;
 			st,adc-freq = <3>;
 			st,mod-12b = <1>;
 			st,ref-sel = <0>;
 			st,sample-time = <3>;
 
-			stmpe_adc {
+			adc {
 				compatible = "st,stmpe-adc";
 				#io-channel-cells = <1>;
-				st,norequest-mask = <0x2F>;
+				st,norequest-mask = <0x2f>;
 			};
 		};
 	};
 
-	i2c-gpio-4 {
+	i2c-12 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -247,6 +249,7 @@
 		pinctrl-0 = <&led_bl_reset>;
 		pinctrl-names = "default";
 		enable-gpios = <&gpm0 1 GPIO_ACTIVE_HIGH>;
+		power-supply = <&panel_vdd>;
 		pwms = <&pwm 1 78770 0>;
 		brightness-levels = <0 48 128 255>;
 		num-interpolated-steps = <8>;
@@ -359,6 +362,39 @@
 	status = "okay";
 };
 
+&i2c_1 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c1_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lsm330dlc-accel";
+		reg = <0x19>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-0 = <&accelerometer_irq>;
+		pinctrl-names = "default";
+		mount-matrix =	"1",  "0",  "0",
+				"0", "-1",  "0",
+				"0",  "0", "-1";
+	};
+
+	gyro@6b {
+		compatible = "st,lsm330dlc-gyro";
+		reg = <0x6b>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <6 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-0 = <&gyro_data_enable &gyro_irq>;
+		pinctrl-names = "default";
+		mount-matrix =	"1",  "0",  "0",
+				"0", "-1",  "0",
+				"0",  "0", "-1";
+	};
+};
+
 &i2c_3 {
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-slave-addr = <0x10>;
@@ -696,6 +732,7 @@
 	samsung,dw-mshc-ciu-div = <0>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
+	mmc-ddr-1_8v;
 	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 	pinctrl-names = "default";
 	bus-width = <4>;
@@ -840,6 +877,12 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
+	gyro_data_enable: gyro-data-enable-pins {
+		samsung,pins = "gpl2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
 	uart_sel: uart-sel-pins {
 		samsung,pins = "gpl2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -890,12 +933,24 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
 
+	accelerometer_irq: accelerometer-irq-pins {
+		samsung,pins = "gpx0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
 	stmpe_adc_irq: stmpe-adc-irq-pins {
 		samsung,pins = "gpx0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
+	gyro_irq: gyro-irq-pins {
+		samsung,pins = "gpx0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
 	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx0-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi b/arch/arm/boot/dts/samsung/exynos4412-ppmu-common.dtsi
index 7f187a3dedcc..7f187a3dedcc 100644
--- a/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4412-ppmu-common.dtsi
diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/samsung/exynos4412-prime.dtsi
index 3731a225f779..3731a225f779 100644
--- a/arch/arm/boot/dts/exynos4412-prime.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4412-prime.dtsi
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/samsung/exynos4412-smdk4412.dts
index a40ff394977c..c83fb250e664 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/samsung/exynos4412-smdk4412.dts
@@ -22,6 +22,10 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_2;
+	};
+
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
 		stdout-path = "serial1:115200n8";
@@ -65,7 +69,7 @@
 &keypad {
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <8>;
-	linux,keypad-no-autorepeat;
+	linux,input-no-autorepeat;
 	wakeup-source;
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	pinctrl-names = "default";
@@ -101,31 +105,31 @@
 		linux,code = <6>;
 	};
 
-	key-A {
+	key-a {
 		keypad,row = <2>;
 		keypad,column = <6>;
 		linux,code = <30>;
 	};
 
-	key-B {
+	key-b {
 		keypad,row = <2>;
 		keypad,column = <7>;
 		linux,code = <48>;
 	};
 
-	key-C {
+	key-c {
 		keypad,row = <0>;
 		keypad,column = <5>;
 		linux,code = <46>;
 	};
 
-	key-D {
+	key-d {
 		keypad,row = <2>;
 		keypad,column = <5>;
 		linux,code = <32>;
 	};
 
-	key-E {
+	key-e {
 		keypad,row = <0>;
 		keypad,column = <7>;
 		linux,code = <18>;
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/samsung/exynos4412-tiny4412.dts
index 04388c575efe..5a2dcdc5c28b 100644
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ b/arch/arm/boot/dts/samsung/exynos4412-tiny4412.dts
@@ -17,6 +17,10 @@
 	model = "FriendlyARM TINY4412 board based on Exynos4412";
 	compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4";
 
+	aliases {
+		mmc0 = &sdhci_2;
+	};
+
 	chosen {
 		stdout-path = &serial_0;
 	};
@@ -79,6 +83,7 @@
 
 	panel {
 		compatible = "innolux,at070tn92";
+		power-supply = <&vddq_lcd>;
 
 		port {
 			panel_input: endpoint {
@@ -86,6 +91,13 @@
 			};
 		};
 	};
+
+	vddq_lcd: regulator-vddq-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "vddq-lcd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
 };
 
 &cpu_thermal {
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/samsung/exynos4412-trats2.dts
index 3c2d2a7836da..3c2d2a7836da 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/samsung/exynos4412-trats2.dts
diff --git a/arch/arm/boot/dts/samsung/exynos4412.dtsi b/arch/arm/boot/dts/samsung/exynos4412.dtsi
new file mode 100644
index 000000000000..dcbe0ce6180f
--- /dev/null
+++ b/arch/arm/boot/dts/samsung/exynos4412.dtsi
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4412 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412
+ * based board files can include this file and provide values for board specific
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional
+ * nodes can be added to this file.
+ */
+
+#include "exynos4x12.dtsi"
+
+/ {
+	compatible = "samsung,exynos4412", "samsung,exynos4";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@a00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xa00>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@a01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xa01>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu2: cpu@a02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xa02>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu3: cpu@a03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xa03>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu0_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <987500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <200000>;
+			opp-suspend;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1037500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1087500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1137500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1187500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1250000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1287500>;
+			clock-latency-ns = <200000>;
+		};
+		cpu0_opp_1500: opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1350000>;
+			clock-latency-ns = <200000>;
+			turbo-mode;
+		};
+	};
+};
+
+&clock {
+	compatible = "samsung,exynos4412-clock";
+};
+
+&combiner {
+	samsung,combiner-nr = <20>;
+};
+
+&gic {
+	cpu-offset = <0x4000>;
+};
+
+&pmu {
+	interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
+	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	status = "okay";
+};
+
+&pmu_system_controller {
+	compatible = "samsung,exynos4412-pmu", "simple-mfd", "syscon";
+};
diff --git a/arch/arm/boot/dts/samsung/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/samsung/exynos4x12-pinctrl.dtsi
new file mode 100644
index 000000000000..04935fbe2f2a
--- /dev/null
+++ b/arch/arm/boot/dts/samsung/exynos4x12-pinctrl.dtsi
@@ -0,0 +1,979 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config options are listed as device
+ * tree nodes in this file.
+ */
+
+#include "exynos-pinctrl.h"
+
+#define PIN_SLP(_pin, _mode, _pull)					\
+	pin- ## _pin {							\
+		samsung,pins = #_pin;					\
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
+	}
+
+&pinctrl_0 {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj0: gpj0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj1: gpj1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data-pins {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart0_fctl: uart0-fctl-pins {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart1_data: uart1-data-pins {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart1_fctl: uart1-fctl-pins {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c2_bus: i2c2-bus-pins {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart2_data: uart2-data-pins {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart2_fctl: uart2-fctl-pins {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart_audio_a: uart-audio-a-pins {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c3_bus: i2c3-bus-pins {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart3_data: uart3-data-pins {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart_audio_b: uart-audio-b-pins {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c4_bus: i2c4-bus-pins {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c5_bus: i2c5-bus-pins {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s1_bus: i2s1-bus-pins {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm1_bus: pcm1-bus-pins {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	ac97_bus: ac97-bus-pins {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s2_bus: i2s2-bus-pins {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm2_bus: pcm2-bus-pins {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spdif_bus: spdif-bus-pins {
+		samsung,pins = "gpc1-0", "gpc1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c6_bus: i2c6-bus-pins {
+		samsung,pins = "gpc1-3", "gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm0_out: pwm0-out-pins {
+		samsung,pins = "gpd0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm1_out: pwm1-out-pins {
+		samsung,pins = "gpd0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_ctrl: lcd-ctrl-pins {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c7_bus: i2c7-bus-pins {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm2_out: pwm2-out-pins {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm3_out: pwm3-out-pins {
+		samsung,pins = "gpd0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c0_bus: i2c0-bus-pins {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	mipi0_clk: mipi0-clk-pins {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c1_bus: i2c1-bus-pins {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	mipi1_clk: mipi1-clk-pins {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_clk: lcd-clk-pins {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_data16: lcd-data-width16-pins {
+		samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
+				"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
+				"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
+				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_data18: lcd-data-width18-pins {
+		samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
+				"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
+				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+				"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
+				"gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_data24: lcd-data-width24-pins {
+		samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_ldi: lcd-ldi-pins {
+		samsung,pins = "gpf3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_a_io: cam-port-a-io-pins {
+		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
+				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
+				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_a_clk_active: cam-port-a-clk-active-pins {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_1 {
+	gpk0: gpk0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk3: gpk3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl0: gpl0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl1: gpl1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl2: gpl2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm0: gpm0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm1: gpm1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm2: gpm2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm3: gpm3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm4: gpm4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpy0: gpy0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpx0: gpx0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx1: gpx1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx2: gpx2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk-pins {
+		samsung,pins = "gpk0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd: sd0-cmd-pins {
+		samsung,pins = "gpk0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_cd: sd0-cd-pins {
+		samsung,pins = "gpk0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1: sd0-bus-width1-pins {
+		samsung,pins = "gpk0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4: sd0-bus-width4-pins {
+		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8: sd0-bus-width8-pins {
+		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_clk: sd4-clk-pins {
+		samsung,pins = "gpk0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_cmd: sd4-cmd-pins {
+		samsung,pins = "gpk0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_cd: sd4-cd-pins {
+		samsung,pins = "gpk0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_bus1: sd4-bus-width1-pins {
+		samsung,pins = "gpk0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_bus4: sd4-bus-width4-pins {
+		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_bus8: sd4-bus-width8-pins {
+		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_clk: sd1-clk-pins {
+		samsung,pins = "gpk1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_cmd: sd1-cmd-pins {
+		samsung,pins = "gpk1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_cd: sd1-cd-pins {
+		samsung,pins = "gpk1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_bus1: sd1-bus-width1-pins {
+		samsung,pins = "gpk1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_bus4: sd1-bus-width4-pins {
+		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpk2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpk2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cd: sd2-cd-pins {
+		samsung,pins = "gpk2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpk2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus8: sd2-bus-width8-pins {
+		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_clk: sd3-clk-pins {
+		samsung,pins = "gpk3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_cmd: sd3-cmd-pins {
+		samsung,pins = "gpk3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_cd: sd3-cd-pins {
+		samsung,pins = "gpk3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_bus1: sd3-bus-width1-pins {
+		samsung,pins = "gpk3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_bus4: sd3-bus-width4-pins {
+		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	cam_port_b_io: cam-port-b-io-pins {
+		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
+				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
+				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_b_clk_active: cam-port-b-clk-active-pins {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint0: ext-int0-pins {
+		samsung,pins = "gpx0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint8: ext-int8-pins {
+		samsung,pins = "gpx1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint15: ext-int15-pins {
+		samsung,pins = "gpx1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint16: ext-int16-pins {
+		samsung,pins = "gpx2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint31: ext-int31-pins {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fimc_is_i2c0: fimc-is-i2c0-pins {
+		samsung,pins = "gpm4-0", "gpm4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fimc_is_i2c1: fimc-is-i2c1-pins {
+		samsung,pins = "gpm4-2", "gpm4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fimc_is_uart: fimc-is-uart-pins {
+		samsung,pins = "gpm3-5", "gpm3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hdmi_cec: hdmi-cec-pins {
+		samsung,pins = "gpx3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_2 {
+	gpz: gpz-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s0_bus: i2s0-bus-pins {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4", "gpz-5", "gpz-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm0_bus: pcm0-bus-pins {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_3 {
+	gpv0: gpv0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv1: gpv1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv2: gpv2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv3: gpv3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv4: gpv4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	c2c_bus: c2c-bus-pins {
+		samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
+				"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
+				"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
+				"gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7",
+				"gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
+				"gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
+				"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
+				"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
+				"gpv4-0", "gpv4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm/boot/dts/samsung/exynos4x12.dtsi b/arch/arm/boot/dts/samsung/exynos4x12.dtsi
new file mode 100644
index 000000000000..b4b5e769145b
--- /dev/null
+++ b/arch/arm/boot/dts/samsung/exynos4x12.dtsi
@@ -0,0 +1,662 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4412 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4x12 SoC series device nodes are listed in this file.
+ * Particular SoCs from Exynos4x12 series can include this file and provide
+ * values for SoCs specific bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4x12 SoCs. As device tree coverage for Exynos4x12 increases, additional
+ * nodes can be added to this file.
+ */
+
+#include "exynos4.dtsi"
+
+#include "exynos4-cpu-thermal.dtsi"
+
+/ {
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
+		fimc-lite0 = &fimc_lite_0;
+		fimc-lite1 = &fimc_lite_1;
+	};
+
+	bus_acp: bus-acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_ACP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_acp_opp_table>;
+		status = "disabled";
+
+		bus_acp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-267000000 {
+				opp-hz = /bits/ 64 <267000000>;
+			};
+		};
+	};
+
+	bus_c2c: bus-c2c {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_C2C>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_dmc: bus-dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		samsung,data-clock-ratio = <4>;
+		#interconnect-cells = <0>;
+		status = "disabled";
+	};
+
+	bus_display: bus-display {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK160>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_display_opp_table>;
+		interconnects = <&bus_leftbus &bus_dmc>;
+		#interconnect-cells = <0>;
+		status = "disabled";
+
+		bus_display_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+		};
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK133>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_fsys_opp_table>;
+		status = "disabled";
+
+		bus_fsys_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+		};
+	};
+
+	bus_leftbus: bus-leftbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		interconnects = <&bus_dmc>;
+		#interconnect-cells = <0>;
+		status = "disabled";
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_SCLK_MFC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peri: bus-peri {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK100>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peri_opp_table>;
+		status = "disabled";
+
+		bus_peri_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+	};
+
+	bus_rightbus: bus-rightbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDR>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_dmc_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1050000>;
+			opp-suspend;
+		};
+	};
+
+	bus_leftbus_opp_table: opp-table-2 {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <925000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1000000>;
+			opp-suspend;
+		};
+	};
+
+	soc: soc {
+
+		pinctrl_0: pinctrl@11400000 {
+			compatible = "samsung,exynos4x12-pinctrl";
+			reg = <0x11400000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_1: pinctrl@11000000 {
+			compatible = "samsung,exynos4x12-pinctrl";
+			reg = <0x11000000 0x1000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+
+			wakup_eint: wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_2: pinctrl@3860000 {
+			compatible = "samsung,exynos4x12-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <10 0>;
+		};
+
+		pinctrl_3: pinctrl@106e0000 {
+			compatible = "samsung,exynos4x12-pinctrl";
+			reg = <0x106e0000 0x1000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		sram@2020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x40000>;
+
+			smp-sram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sram@2f000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x2f000 0x1000>;
+			};
+		};
+
+		pd_isp: power-domain@10023ca0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023ca0 0x20>;
+			#power-domain-cells = <0>;
+			label = "ISP";
+		};
+
+		l2c: cache-controller@10502000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x10502000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			arm,tag-latency = <2 2 1>;
+			arm,data-latency = <3 2 1>;
+			arm,double-linefill = <1>;
+			arm,double-linefill-incr = <0>;
+			arm,double-linefill-wrap = <1>;
+			arm,prefetch-drop = <1>;
+			arm,prefetch-offset = <7>;
+		};
+
+		clock: clock-controller@10030000 {
+			reg = <0x10030000 0x18000>;
+			#clock-cells = <1>;
+		};
+
+		isp_clock: clock-controller@10048000 {
+			compatible = "samsung,exynos4412-isp-clock";
+			reg = <0x10048000 0x1000>;
+			#clock-cells = <1>;
+			power-domains = <&pd_isp>;
+			clocks = <&clock CLK_ACLK200>,
+				 <&clock CLK_ACLK400_MCUISP>;
+			clock-names = "aclk200", "aclk400_mcuisp";
+		};
+
+		timer@10050000 {
+			compatible = "samsung,exynos4412-mct";
+			reg = <0x10050000 0x800>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+			interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					      <&combiner 12 5>,
+					      <&combiner 12 6>,
+					      <&combiner 12 7>,
+					      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog: watchdog@10060000 {
+			compatible = "samsung,exynos5250-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_WDT>;
+			clock-names = "watchdog";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+		};
+
+		adc: adc@126c0000 {
+			compatible = "samsung,exynos4212-adc";
+			reg = <0x126c0000 0x100>;
+			interrupt-parent = <&combiner>;
+			interrupts = <10 3>;
+			clocks = <&clock CLK_TSADC>;
+			clock-names = "adc";
+			#io-channel-cells = <1>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		g2d: g2d@10800000 {
+			compatible = "samsung,exynos4212-g2d";
+			reg = <0x10800000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
+			clock-names = "sclk_fimg2d", "fimg2d";
+			iommus = <&sysmmu_g2d>;
+		};
+
+		mshc_0: mmc@12550000 {
+			compatible = "samsung,exynos4412-dw-mshc";
+			reg = <0x12550000 0x1000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			fifo-depth = <0x80>;
+			clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
+			clock-names = "biu", "ciu";
+			status = "disabled";
+		};
+
+		sysmmu_g2d: sysmmu@10a40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x10a40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 7>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_isp: sysmmu@12260000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12260000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 2>;
+			power-domains = <&pd_isp>;
+			clock-names = "sysmmu";
+			clocks = <&isp_clock CLK_ISP_SMMU_ISP>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_drc: sysmmu@12270000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12270000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 3>;
+			power-domains = <&pd_isp>;
+			clock-names = "sysmmu";
+			clocks = <&isp_clock CLK_ISP_SMMU_DRC>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_fd: sysmmu@122a0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x122a0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 4>;
+			power-domains = <&pd_isp>;
+			clock-names = "sysmmu";
+			clocks = <&isp_clock CLK_ISP_SMMU_FD>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_mcuctl: sysmmu@122b0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x122b0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 5>;
+			power-domains = <&pd_isp>;
+			clock-names = "sysmmu";
+			clocks = <&isp_clock CLK_ISP_SMMU_ISPCX>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_lite0: sysmmu@123b0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x123b0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 0>;
+			power-domains = <&pd_isp>;
+			clock-names = "sysmmu", "master";
+			clocks = <&isp_clock CLK_ISP_SMMU_LITE0>,
+				 <&isp_clock CLK_ISP_FIMC_LITE0>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_lite1: sysmmu@123c0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x123c0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 1>;
+			power-domains = <&pd_isp>;
+			clock-names = "sysmmu", "master";
+			clocks = <&isp_clock CLK_ISP_SMMU_LITE1>,
+				 <&isp_clock CLK_ISP_FIMC_LITE1>;
+			#iommu-cells = <0>;
+		};
+	};
+};
+
+&combiner {
+	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&camera {
+	ranges = <0x0 0x11800000 0xba1000>;
+	clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+		 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
+	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+
+	/* fimc_[0-3] are configured outside, under phandles */
+	fimc_lite_0: fimc-lite@b90000 {
+		compatible = "samsung,exynos4212-fimc-lite";
+		reg = <0x00b90000 0x1000>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd_isp>;
+		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
+		clock-names = "flite";
+		iommus = <&sysmmu_fimc_lite0>;
+		status = "disabled";
+	};
+
+	fimc_lite_1: fimc-lite@ba0000 {
+		compatible = "samsung,exynos4212-fimc-lite";
+		reg = <0x00ba0000 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd_isp>;
+		clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
+		clock-names = "flite";
+		iommus = <&sysmmu_fimc_lite1>;
+		status = "disabled";
+	};
+
+	fimc_is: fimc-is@800000 {
+		compatible = "samsung,exynos4212-fimc-is";
+		reg = <0x00800000 0x260000>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd_isp>;
+		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
+			 <&isp_clock CLK_ISP_FIMC_LITE1>,
+			 <&isp_clock CLK_ISP_PPMUISPX>,
+			 <&isp_clock CLK_ISP_PPMUISPMX>,
+			 <&isp_clock CLK_ISP_FIMC_ISP>,
+			 <&isp_clock CLK_ISP_FIMC_DRC>,
+			 <&isp_clock CLK_ISP_FIMC_FD>,
+			 <&isp_clock CLK_ISP_MCUISP>,
+			 <&isp_clock CLK_ISP_GICISP>,
+			 <&isp_clock CLK_ISP_MCUCTL_ISP>,
+			 <&isp_clock CLK_ISP_PWM_ISP>,
+			 <&isp_clock CLK_ISP_DIV_ISP0>,
+			 <&isp_clock CLK_ISP_DIV_ISP1>,
+			 <&isp_clock CLK_ISP_DIV_MCUISP0>,
+			 <&isp_clock CLK_ISP_DIV_MCUISP1>,
+			 <&clock CLK_MOUT_MPLL_USER_T>,
+			 <&clock CLK_ACLK200>,
+			 <&clock CLK_ACLK400_MCUISP>,
+			 <&clock CLK_DIV_ACLK200>,
+			 <&clock CLK_DIV_ACLK400_MCUISP>,
+			 <&clock CLK_UART_ISP_SCLK>;
+		clock-names = "lite0", "lite1", "ppmuispx",
+			      "ppmuispmx", "isp",
+			      "drc", "fd", "mcuisp",
+			      "gicisp", "mcuctl_isp", "pwm_isp",
+			      "ispdiv0", "ispdiv1", "mcuispdiv0",
+			      "mcuispdiv1", "mpll", "aclk200",
+			      "aclk400mcuisp", "div_aclk200",
+			      "div_aclk400mcuisp", "uart";
+		iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
+			 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
+		iommu-names = "isp", "drc", "fd", "mcuctl";
+		samsung,pmu-syscon = <&pmu_system_controller>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		status = "disabled";
+
+		i2c1_isp: i2c-isp@940000 {
+			compatible = "samsung,exynos4212-i2c-isp";
+			reg = <0x00940000 0x100>;
+			clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
+			clock-names = "i2c_isp";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&exynos_usbphy {
+	compatible = "samsung,exynos4x12-usb2-phy";
+	samsung,sysreg-phandle = <&sys_reg>;
+};
+
+&fimc_0 {
+	compatible = "samsung,exynos4212-fimc";
+	samsung,pix-limits = <4224 8192 1920 4224>;
+	samsung,mainscaler-ext;
+	samsung,isp-wb;
+	samsung,cam-if;
+};
+
+&fimc_1 {
+	compatible = "samsung,exynos4212-fimc";
+	samsung,pix-limits = <4224 8192 1920 4224>;
+	samsung,mainscaler-ext;
+	samsung,isp-wb;
+	samsung,cam-if;
+};
+
+&fimc_2 {
+	compatible = "samsung,exynos4212-fimc";
+	samsung,pix-limits = <4224 8192 1920 4224>;
+	samsung,mainscaler-ext;
+	samsung,isp-wb;
+	samsung,lcd-wb;
+	samsung,cam-if;
+};
+
+&fimc_3 {
+	compatible = "samsung,exynos4212-fimc";
+	samsung,pix-limits = <1920 8192 1366 1920>;
+	samsung,rotators = <0>;
+	samsung,mainscaler-ext;
+	samsung,isp-wb;
+	samsung,lcd-wb;
+};
+
+&gpu {
+	interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "gp",
+			  "gpmmu",
+			  "pp0",
+			  "ppmmu0",
+			  "pp1",
+			  "ppmmu1",
+			  "pp2",
+			  "ppmmu2",
+			  "pp3",
+			  "ppmmu3",
+			  "pmu";
+	operating-points-v2 = <&gpu_opp_table>;
+
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <875000>;
+		};
+		opp-267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-350000000 {
+			opp-hz = /bits/ 64 <350000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-440000000 {
+			opp-hz = /bits/ 64 <440000000>;
+			opp-microvolt = <1025000>;
+		};
+	};
+};
+
+&hdmi {
+	compatible = "samsung,exynos4212-hdmi";
+};
+
+&jpeg_codec {
+	compatible = "samsung,exynos4212-jpeg";
+};
+
+&rotator {
+	compatible = "samsung,exynos4212-rotator";
+};
+
+&mixer {
+	compatible = "samsung,exynos4212-mixer";
+	clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
+	clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+		 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
+	interconnects = <&bus_display &bus_dmc>;
+};
+
+&pmu_system_controller {
+	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
+			"clkout4", "clkout8", "clkout9";
+	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
+		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
+		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
+	#clock-cells = <1>;
+};
+
+&tmu {
+	compatible = "samsung,exynos4412-tmu";
+	interrupt-parent = <&combiner>;
+	interrupts = <2 4>;
+	reg = <0x100c0000 0x100>;
+	clocks = <&clock CLK_TMU_APBIF>;
+	clock-names = "tmu_apbif";
+	status = "disabled";
+};
+
+#include "exynos4x12-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/samsung/exynos5.dtsi
index c8da0d4b1b33..4a17a19586bb 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5.dtsi
@@ -7,7 +7,7 @@
  *
  * Samsung's Exynos5 SoC series device nodes are listed in this file. Particular
  * SoCs from Exynos5 series can include this file and provide values for SoCs
- * specfic bindings.
+ * specific bindings.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -104,31 +104,31 @@
 
 		serial_0: serial@12c00000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
+			reg = <0x12c00000 0x100>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial_1: serial@12c10000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
+			reg = <0x12c10000 0x100>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial_2: serial@12c20000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
+			reg = <0x12c20000 0x100>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial_3: serial@12c30000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C30000 0x100>;
+			reg = <0x12c30000 0x100>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		i2c_0: i2c@12c60000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12C60000 0x100>;
+			reg = <0x12c60000 0x100>;
 			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -138,7 +138,7 @@
 
 		i2c_1: i2c@12c70000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12C70000 0x100>;
+			reg = <0x12c70000 0x100>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -148,7 +148,7 @@
 
 		i2c_2: i2c@12c80000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12C80000 0x100>;
+			reg = <0x12c80000 0x100>;
 			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -158,7 +158,7 @@
 
 		i2c_3: i2c@12c90000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12C90000 0x100>;
+			reg = <0x12c90000 0x100>;
 			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -168,7 +168,7 @@
 
 		pwm: pwm@12dd0000 {
 			compatible = "samsung,exynos4210-pwm";
-			reg = <0x12DD0000 0x100>;
+			reg = <0x12dd0000 0x100>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
@@ -180,7 +180,7 @@
 
 		rtc: rtc@101e0000 {
 			compatible = "samsung,s3c6410-rtc";
-			reg = <0x101E0000 0x100>;
+			reg = <0x101e0000 0x100>;
 			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -198,7 +198,7 @@
 
 		dp: dp-controller@145b0000 {
 			compatible = "samsung,exynos5-dp";
-			reg = <0x145B0000 0x1000>;
+			reg = <0x145b0000 0x1000>;
 			interrupts = <10 3>;
 			interrupt-parent = <&combiner>;
 			status = "disabled";
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/samsung/exynos5250-arndale.dts
index 71c0e87d3a1d..d586189966da 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/samsung/exynos5250-arndale.dts
@@ -23,6 +23,11 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -73,6 +78,19 @@
 		};
 	};
 
+	/*
+	 * For unknown reasons HDMI-DDC does not work with Exynos I2C
+	 * controllers. Lets use software I2C over GPIO pins as a workaround.
+	 */
+	i2c_ddc: i2c-10 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_gpio_bus>;
+		sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+	};
+
 	panel: panel {
 		compatible = "boe,hv070wsa-100";
 		power-supply = <&vcc_3v3_reg>;
@@ -179,12 +197,15 @@
 		vddio-supply = <&vcc_1v8_reg>;
 		vddlvds-supply = <&vcc_3v3_reg>;
 		reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@1 {
-			reg = <1>;
-			bridge_out_ep: endpoint {
-				remote-endpoint = <&panel_ep>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@1 {
+				reg = <1>;
+				bridge_out_ep: endpoint {
+					remote-endpoint = <&panel_ep>;
+				};
 			};
 		};
 	};
@@ -524,8 +545,8 @@
 		SPKVDD1-supply = <&main_dc_reg>;
 		SPKVDD2-supply = <&main_dc_reg>;
 
-		wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
-		wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
+		wlf,ldo1ena-gpios = <&gpb0 0 GPIO_ACTIVE_HIGH>;
+		wlf,ldo2ena-gpios = <&gpb0 1 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -573,6 +594,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 };
 
 &mmc_2 {
@@ -615,24 +637,6 @@
 	status = "okay";
 };
 
-&soc {
-	/*
-	 * For unknown reasons HDMI-DDC does not work with Exynos I2C
-	 * controllers. Lets use software I2C over GPIO pins as a workaround.
-	 */
-	i2c_ddc: i2c-10 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_gpio_bus>;
-		status = "okay";
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};
-
 &usbdrd {
 	vdd10-supply = <&ldo15_reg>;
 	vdd33-supply = <&ldo12_reg>;
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/samsung/exynos5250-pinctrl.dtsi
index 48732edadff1..d956540a2d88 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5250-pinctrl.dtsi
@@ -5,8 +5,8 @@
  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
+ * Samsung's Exynos5250 SoC pin-mux and pin-config options are listed as device
+ * tree nodes in this file.
  */
 
 #include "exynos-pinctrl.h"
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts
index 71293749ac48..6af1f64c984b 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts
@@ -17,6 +17,8 @@
 	compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5";
 
 	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
 	};
 
 	memory@40000000 {
@@ -350,6 +352,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 };
 
 &mmc_2 {
@@ -391,7 +394,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "w25x80";
+		compatible = "winbond,w25x80", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
 
@@ -419,6 +422,43 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
+
+	srom_ctl: srom-ctl-pins {
+		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
+			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	srom_ebi: srom-ebi-pins {
+		samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
+			       "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
+			       "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
+			       "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
+			       "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
+			       "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&sromc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
+
+	ethernet@1,0 {
+		compatible = "smsc,lan9115";
+		reg = <1 0 0x100>;
+		phy-mode = "mii";
+		smsc,irq-push-pull;
+		interrupt-parent = <&gpx0>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		reg-io-width = <2>;
+
+		samsung,srom-page-mode;
+		samsung,srom-timing = <9 12 1 6 1 1>;
+	};
 };
 
 &usbdrd {
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/samsung/exynos5250-snow-common.dtsi
index 3d84b9c6dea3..65b000df176e 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5250-snow-common.dtsi
@@ -15,6 +15,9 @@
 / {
 	aliases {
 		i2c104 = &i2c_104;
+		mmc0 = &mmc_0; /* eMMC */
+		mmc1 = &mmc_2; /* SD */
+		mmc2 = &mmc_3; /* WiFi */
 	};
 
 	memory@40000000 {
@@ -57,12 +60,9 @@
 
 	i2c-arbitrator {
 		compatible = "i2c-arb-gpio-challenge";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		i2c-parent = <&i2c_4>;
 
-		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+		our-claim-gpios = <&gpf0 3 GPIO_ACTIVE_LOW>;
 		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
 		slew-delay-us = <10>;
 		wait-retry-us = <3000>;
@@ -72,8 +72,7 @@
 		pinctrl-0 = <&arb_our_claim &arb_their_claim>;
 
 		/* Use ID 104 as a hint that we're on physical bus 4 */
-		i2c_104: i2c@0 {
-			reg = <0>;
+		i2c_104: i2c-arb {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
@@ -549,6 +548,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 };
 
 /* uSD card */
@@ -711,4 +711,4 @@
 	vbus-supply = <&usb3_vbus_reg>;
 };
 
-#include "cros-ec-keyboard.dtsi"
+#include "../cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/samsung/exynos5250-snow-rev5.dts
index 0a47597d6f0d..3d32c3476e84 100644
--- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
+++ b/arch/arm/boot/dts/samsung/exynos5250-snow-rev5.dts
@@ -27,7 +27,7 @@
 		};
 
 		codec {
-			sound-dai = <&max98090 0>, <&hdmi>;
+			sound-dai = <&max98090>, <&hdmi>;
 		};
 	};
 };
@@ -42,7 +42,7 @@
 		pinctrl-0 = <&max98090_irq>;
 		clocks = <&pmu_system_controller 0>;
 		clock-names = "mclk";
-		#sound-dai-cells = <1>;
+		#sound-dai-cells = <0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/samsung/exynos5250-snow.dts
index 906aa7aae710..906aa7aae710 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/samsung/exynos5250-snow.dts
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/samsung/exynos5250-spring.dts
index 5eca10ecd550..d126fccdcaf3 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/samsung/exynos5250-spring.dts
@@ -23,6 +23,11 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_1;
+	};
+
 	chosen {
 		bootargs = "console=tty1";
 		stdout-path = "serial3:115200n8";
@@ -431,6 +436,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 };
 
 /*
@@ -558,4 +564,4 @@
 	vdd33-supply = <&ldo12_reg>;
 };
 
-#include "cros-ec-keyboard.dtsi"
+#include "../cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/samsung/exynos5250.dtsi
index 4708dcd575a7..4616794b19e8 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5250.dtsi
@@ -7,7 +7,7 @@
  *
  * Samsung Exynos5250 SoC device nodes are listed in this file.
  * Exynos5250 based board files can include this file and provide
- * values for board specfic bindings.
+ * values for board specific bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
  * Exynos5250 SoC. As device tree coverage for Exynos5250 increases,
@@ -30,10 +30,6 @@
 		gsc1 = &gsc_1;
 		gsc2 = &gsc_2;
 		gsc3 = &gsc_3;
-		mshc0 = &mmc_0;
-		mshc1 = &mmc_1;
-		mshc2 = &mmc_2;
-		mshc3 = &mmc_3;
 		i2c4 = &i2c_4;
 		i2c5 = &i2c_5;
 		i2c6 = &i2c_6;
@@ -81,7 +77,7 @@
 		};
 	};
 
-	cpu0_opp_table: opp-table0 {
+	cpu0_opp_table: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -216,14 +212,14 @@
 
 		pd_disp1: power-domain@100440a0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440A0 0x20>;
+			reg = <0x100440a0 0x20>;
 			#power-domain-cells = <0>;
 			label = "DISP1";
 		};
 
 		pd_mau: power-domain@100440c0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440C0 0x20>;
+			reg = <0x100440c0 0x20>;
 			#power-domain-cells = <0>;
 			label = "MAU";
 		};
@@ -236,7 +232,7 @@
 
 		clock_audss: audss-clock-controller@3810000 {
 			compatible = "samsung,exynos5250-audss-clock";
-			reg = <0x03810000 0x0C>;
+			reg = <0x03810000 0x0c>;
 			#clock-cells = <1>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
 				 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
@@ -247,7 +243,7 @@
 		timer@101c0000 {
 			compatible = "samsung,exynos5250-mct",
 				     "samsung,exynos4210-mct";
-			reg = <0x101C0000 0x800>;
+			reg = <0x101c0000 0x800>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 			clock-names = "fin_pll", "mct";
 			interrupts-extended = <&combiner 23 3>,
@@ -290,7 +286,7 @@
 		};
 
 		pmu_system_controller: system-controller@10040000 {
-			compatible = "samsung,exynos5250-pmu", "syscon";
+			compatible = "samsung,exynos5250-pmu", "simple-mfd", "syscon";
 			reg = <0x10040000 0x5000>;
 			clock-names = "clkout16";
 			clocks = <&clock CLK_FIN_PLL>;
@@ -298,11 +294,21 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
+
+			dp_phy: dp-phy {
+				compatible = "samsung,exynos5250-dp-video-phy";
+				#phy-cells = <0>;
+			};
+
+			mipi_phy: mipi-phy {
+				compatible = "samsung,s5pv210-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
 
 		watchdog@101d0000 {
 			compatible = "samsung,exynos5250-wdt";
-			reg = <0x101D0000 0x100>;
+			reg = <0x101d0000 0x100>;
 			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_WDT>;
 			clock-names = "watchdog";
@@ -322,7 +328,7 @@
 
 		rotator: rotator@11c00000 {
 			compatible = "samsung,exynos5250-rotator";
-			reg = <0x11C00000 0x64>;
+			reg = <0x11c00000 0x64>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_ROTATOR>;
 			clock-names = "rotator";
@@ -387,10 +393,10 @@
 
 		sata: sata@122f0000 {
 			compatible = "snps,dwc-ahci";
-			reg = <0x122F0000 0x1ff>;
+			reg = <0x122f0000 0x1ff>;
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
-			clock-names = "sata", "sclk_sata";
+			clock-names = "sata", "pclk";
 			phys = <&sata_phy>;
 			phy-names = "sata-phy";
 			ports-implemented = <0x1>;
@@ -410,7 +416,7 @@
 		/* i2c_0-3 are defined in exynos5.dtsi */
 		i2c_4: i2c@12ca0000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CA0000 0x100>;
+			reg = <0x12ca0000 0x100>;
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -423,7 +429,7 @@
 
 		i2c_5: i2c@12cb0000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CB0000 0x100>;
+			reg = <0x12cb0000 0x100>;
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -436,7 +442,7 @@
 
 		i2c_6: i2c@12cc0000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CC0000 0x100>;
+			reg = <0x12cc0000 0x100>;
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -449,7 +455,7 @@
 
 		i2c_7: i2c@12cd0000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CD0000 0x100>;
+			reg = <0x12cd0000 0x100>;
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -462,7 +468,7 @@
 
 		i2c_8: i2c@12ce0000 {
 			compatible = "samsung,s3c2440-hdmiphy-i2c";
-			reg = <0x12CE0000 0x1000>;
+			reg = <0x12ce0000 0x1000>;
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -470,7 +476,7 @@
 			clock-names = "i2c";
 			status = "disabled";
 
-			hdmiphy: hdmiphy@38 {
+			hdmiphy: hdmi-phy@38 {
 				compatible = "samsung,exynos4212-hdmiphy";
 				reg = <0x38>;
 			};
@@ -478,7 +484,7 @@
 
 		i2c_9: i2c@121d0000 {
 			compatible = "samsung,exynos5-sata-phy-i2c";
-			reg = <0x121D0000 0x100>;
+			reg = <0x121d0000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_SATA_PHYI2C>;
@@ -505,6 +511,7 @@
 			clock-names = "spi", "spi_busclk0";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi0_bus>;
+			fifo-depth = <256>;
 		};
 
 		spi_1: spi@12d30000 {
@@ -520,6 +527,7 @@
 			clock-names = "spi", "spi_busclk0";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi1_bus>;
+			fifo-depth = <64>;
 		};
 
 		spi_2: spi@12d40000 {
@@ -535,6 +543,7 @@
 			clock-names = "spi", "spi_busclk0";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi2_bus>;
+			fifo-depth = <64>;
 		};
 
 		mmc_0: mmc@12200000 {
@@ -608,7 +617,7 @@
 		i2s1: i2s@12d60000 {
 			compatible = "samsung,s3c6410-i2s";
 			status = "disabled";
-			reg = <0x12D60000 0x100>;
+			reg = <0x12d60000 0x100>;
 			dmas = <&pdma1 12>,
 				<&pdma1 11>;
 			dma-names = "tx", "rx";
@@ -623,7 +632,7 @@
 		i2s2: i2s@12d70000 {
 			compatible = "samsung,s3c6410-i2s";
 			status = "disabled";
-			reg = <0x12D70000 0x100>;
+			reg = <0x12d70000 0x100>;
 			dmas = <&pdma0 12>,
 				<&pdma0 11>;
 			dma-names = "tx", "rx";
@@ -635,17 +644,17 @@
 			#sound-dai-cells = <1>;
 		};
 
-		usbdrd: usb3 {
+		usbdrd: usb@12000000 {
 			compatible = "samsung,exynos5250-dwusb3";
 			clocks = <&clock CLK_USB3>;
 			clock-names = "usbdrd30";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x12000000 0x10000>;
 
-			usbdrd_dwc3: usb@12000000 {
+			usbdrd_dwc3: usb@0 {
 				compatible = "snps,dwc3";
-				reg = <0x12000000 0x10000>;
+				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
@@ -695,7 +704,7 @@
 
 		pdma0: dma-controller@121a0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
+			reg = <0x121a0000 0x1000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
@@ -704,7 +713,7 @@
 
 		pdma1: dma-controller@121b0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
+			reg = <0x121b0000 0x1000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
@@ -722,7 +731,7 @@
 
 		mdma1: dma-controller@11c10000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
+			reg = <0x11c10000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA1>;
 			clock-names = "apb_pclk";
@@ -787,7 +796,7 @@
 
 		hdmicec: cec@101b0000 {
 			compatible = "samsung,s5p-cec";
-			reg = <0x101B0000 0x200>;
+			reg = <0x101b0000 0x200>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_HDMI_CEC>;
 			clock-names = "hdmicec";
@@ -810,18 +819,6 @@
 			status = "disabled";
 		};
 
-		dp_phy: video-phy-0 {
-			compatible = "samsung,exynos5250-dp-video-phy";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <0>;
-		};
-
-		mipi_phy: video-phy-1 {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			#phy-cells = <1>;
-			syscon = <&pmu_system_controller>;
-		};
-
 		dsi_0: dsi@14500000 {
 			compatible = "samsung,exynos4210-mipi-dsi";
 			reg = <0x14500000 0x10000>;
@@ -838,7 +835,7 @@
 
 		adc: adc@12d10000 {
 			compatible = "samsung,exynos-adc-v1";
-			reg = <0x12D10000 0x100>;
+			reg = <0x12d10000 0x100>;
 			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_ADC>;
 			clock-names = "adc";
@@ -849,7 +846,7 @@
 
 		sysmmu_g2d: sysmmu@10a60000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A60000 0x1000>;
+			reg = <0x10a60000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <24 5>;
 			clock-names = "sysmmu", "master";
@@ -881,7 +878,7 @@
 
 		sysmmu_rotator: sysmmu@11d40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11D40000 0x1000>;
+			reg = <0x11d40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 0>;
 			clock-names = "sysmmu", "master";
@@ -891,7 +888,7 @@
 
 		sysmmu_jpeg: sysmmu@11f20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11F20000 0x1000>;
+			reg = <0x11f20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 2>;
 			power-domains = <&pd_gsc>;
@@ -922,7 +919,7 @@
 
 		sysmmu_fimc_fd: sysmmu@132a0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132A0000 0x1000>;
+			reg = <0x132a0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 0>;
 			clock-names = "sysmmu";
@@ -952,7 +949,7 @@
 
 		sysmmu_fimc_mcuctl: sysmmu@132b0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132B0000 0x1000>;
+			reg = <0x132b0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 4>;
 			clock-names = "sysmmu";
@@ -962,7 +959,7 @@
 
 		sysmmu_fimc_odc: sysmmu@132c0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132C0000 0x1000>;
+			reg = <0x132c0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <11 0>;
 			clock-names = "sysmmu";
@@ -972,7 +969,7 @@
 
 		sysmmu_fimc_dis0: sysmmu@132d0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132D0000 0x1000>;
+			reg = <0x132d0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <10 4>;
 			clock-names = "sysmmu";
@@ -982,7 +979,7 @@
 
 		sysmmu_fimc_dis1: sysmmu@132e0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132E0000 0x1000>;
+			reg = <0x132e0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <9 4>;
 			clock-names = "sysmmu";
@@ -992,7 +989,7 @@
 
 		sysmmu_fimc_3dnr: sysmmu@132f0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132F0000 0x1000>;
+			reg = <0x132f0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 6>;
 			clock-names = "sysmmu";
@@ -1002,7 +999,7 @@
 
 		sysmmu_fimc_lite0: sysmmu@13c40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C40000 0x1000>;
+			reg = <0x13c40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <3 4>;
 			power-domains = <&pd_gsc>;
@@ -1013,7 +1010,7 @@
 
 		sysmmu_fimc_lite1: sysmmu@13c50000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C50000 0x1000>;
+			reg = <0x13c50000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <24 1>;
 			power-domains = <&pd_gsc>;
@@ -1024,7 +1021,7 @@
 
 		sysmmu_gsc0: sysmmu@13e80000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E80000 0x1000>;
+			reg = <0x13e80000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 0>;
 			power-domains = <&pd_gsc>;
@@ -1035,7 +1032,7 @@
 
 		sysmmu_gsc1: sysmmu@13e90000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E90000 0x1000>;
+			reg = <0x13e90000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 2>;
 			power-domains = <&pd_gsc>;
@@ -1046,7 +1043,7 @@
 
 		sysmmu_gsc2: sysmmu@13ea0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13EA0000 0x1000>;
+			reg = <0x13ea0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 4>;
 			power-domains = <&pd_gsc>;
@@ -1057,7 +1054,7 @@
 
 		sysmmu_gsc3: sysmmu@13eb0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13EB0000 0x1000>;
+			reg = <0x13eb0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 6>;
 			power-domains = <&pd_gsc>;
@@ -1107,7 +1104,7 @@
 &cpu_thermal {
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
-	thermal-sensors = <&tmu 0>;
+	thermal-sensors = <&tmu>;
 
 	cooling-maps {
 		map0 {
@@ -1217,6 +1214,15 @@
 	dma-names = "rx", "tx";
 };
 
+&sromc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x04000000 0x20000>,
+		 <1 0 0x05000000 0x20000>,
+		 <2 0 0x06000000 0x20000>,
+		 <3 0 0x07000000 0x20000>;
+};
+
 &sss {
 	clocks = <&clock CLK_SSS>;
 	clock-names = "secss";
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/samsung/exynos5260-pinctrl.dtsi
index 43e4a541f479..d15494b4bda9 100644
--- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5260-pinctrl.dtsi
@@ -6,7 +6,7 @@
  *		http://www.samsung.com
  *
  * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device
- * tree nodes are listed in this file.
+ * tree nodes in this file.
  */
 
 #include "exynos-pinctrl.h"
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/samsung/exynos5260-xyref5260.dts
index 3c3b751d4360..d072a7398866 100644
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ b/arch/arm/boot/dts/samsung/exynos5260-xyref5260.dts
@@ -18,6 +18,11 @@
 		reg = <0x20000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -87,8 +92,9 @@
 	status = "okay";
 	broken-cd;
 	cap-mmc-highspeed;
-	supports-hs200-mode; /* 200 MHz */
+	mmc-hs200-1_8v;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/samsung/exynos5260.dtsi
index ff1ee409eff3..a97449b4640c 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5260.dtsi
@@ -177,7 +177,7 @@
 
 		clock_g2d: clock-controller@10a00000 {
 			compatible = "samsung,exynos5260-clock-g2d";
-			reg = <0x10A00000 0x10000>;
+			reg = <0x10a00000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>,
 				 <&clock_top TOP_DOUT_ACLK_G2D_333>;
@@ -187,7 +187,7 @@
 
 		clock_mif: clock-controller@10ce0000 {
 			compatible = "samsung,exynos5260-clock-mif";
-			reg = <0x10CE0000 0x10000>;
+			reg = <0x10ce0000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>;
 			clock-names = "fin_pll";
@@ -213,7 +213,7 @@
 
 		clock_fsys: clock-controller@122e0000 {
 			compatible = "samsung,exynos5260-clock-fsys";
-			reg = <0x122E0000 0x10000>;
+			reg = <0x122e0000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>,
 				 <&fin_pll>,
@@ -233,7 +233,7 @@
 
 		clock_aud: clock-controller@128c0000 {
 			compatible = "samsung,exynos5260-clock-aud";
-			reg = <0x128C0000 0x10000>;
+			reg = <0x128c0000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>,
 				 <&clock_top TOP_FOUT_AUD_PLL>,
@@ -247,7 +247,7 @@
 
 		clock_isp: clock-controller@133c0000 {
 			compatible = "samsung,exynos5260-clock-isp";
-			reg = <0x133C0000 0x10000>;
+			reg = <0x133c0000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>,
 				 <&clock_top TOP_DOUT_ACLK_ISP1_266>,
@@ -261,7 +261,7 @@
 
 		clock_gscl: clock-controller@13f00000 {
 			compatible = "samsung,exynos5260-clock-gscl";
-			reg = <0x13F00000 0x10000>;
+			reg = <0x13f00000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>,
 				 <&clock_top TOP_DOUT_ACLK_GSCL_400>,
@@ -335,7 +335,7 @@
 		mct: timer@100b0000 {
 			compatible = "samsung,exynos5260-mct",
 				     "samsung,exynos4210-mct";
-			reg = <0x100B0000 0x1000>;
+			reg = <0x100b0000 0x1000>;
 			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
 			clock-names = "fin_pll", "mct";
 			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -356,8 +356,8 @@
 			compatible = "arm,cci-400";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			reg = <0x10F00000 0x1000>;
-			ranges = <0x0 0x10F00000 0x6000>;
+			reg = <0x10f00000 0x1000>;
+			ranges = <0x0 0x10f00000 0x6000>;
 
 			cci_control0: slave-if@4000 {
 				compatible = "arm,cci-400-ctrl-if";
@@ -392,18 +392,18 @@
 
 		pinctrl_2: pinctrl@128b0000 {
 			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x128B0000 0x1000>;
+			reg = <0x128b0000 0x1000>;
 			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pmu_system_controller: system-controller@10d50000 {
 			compatible = "samsung,exynos5260-pmu", "syscon";
-			reg = <0x10D50000 0x10000>;
+			reg = <0x10d50000 0x10000>;
 		};
 
 		uart0: serial@12c00000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
+			reg = <0x12c00000 0x100>;
 			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -412,7 +412,7 @@
 
 		uart1: serial@12c10000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
+			reg = <0x12c10000 0x100>;
 			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -421,7 +421,7 @@
 
 		uart2: serial@12c20000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
+			reg = <0x12c20000 0x100>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -499,7 +499,7 @@
 
 		hsi2c_0: i2c@12da0000 {
 			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DA0000 0x1000>;
+			reg = <0x12da0000 0x1000>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -512,7 +512,7 @@
 
 		hsi2c_1: i2c@12db0000 {
 			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DB0000 0x1000>;
+			reg = <0x12db0000 0x1000>;
 			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -525,7 +525,7 @@
 
 		hsi2c_2: i2c@12dc0000 {
 			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DC0000 0x1000>;
+			reg = <0x12dc0000 0x1000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -538,7 +538,7 @@
 
 		hsi2c_3: i2c@12dd0000 {
 			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DD0000 0x1000>;
+			reg = <0x12dd0000 0x1000>;
 			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/samsung/exynos5410-odroidxu.dts
index d1cbc6b8a570..882fc77c4bc4 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/samsung/exynos5410-odroidxu.dts
@@ -21,6 +21,8 @@
 
 	aliases {
 		ethernet = &ethernet;
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
 	};
 
 	memory@40000000 {
@@ -120,7 +122,6 @@
 };
 
 &cpu0_thermal {
-	thermal-sensors = <&tmu_cpu0 0>;
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
 
@@ -164,8 +165,7 @@
 };
 
 &hsi2c_4 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <400000>;
+	clock-frequency = <400000>;
 	status = "okay";
 
 	usb3503: usb-hub@8 {
@@ -515,6 +515,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	vmmc-supply = <&ldo20_reg>;
 	vqmmc-supply = <&ldo11_reg>;
diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/samsung/exynos5410-pinctrl.dtsi
index f7b923382892..f7b923382892 100644
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5410-pinctrl.dtsi
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/samsung/exynos5410-smdk5410.dts
index b8f953c41c73..bb29b76f6f6a 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/samsung/exynos5410-smdk5410.dts
@@ -18,6 +18,11 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -61,6 +66,7 @@
 	cap-mmc-highspeed;
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/samsung/exynos5410.dtsi
index 8a6b890fb8f7..350bc8d6aa5c 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5410.dtsi
@@ -7,7 +7,7 @@
  *
  * Samsung Exynos5410 SoC device nodes are listed in this file.
  * Exynos5410 based board files can include this file and provide
- * values for board specfic bindings.
+ * values for board specific bindings.
  */
 
 #include "exynos54xx.dtsi"
@@ -81,7 +81,7 @@
 
 		clock_audss: audss-clock-controller@3810000 {
 			compatible = "samsung,exynos5410-audss-clock";
-			reg = <0x03810000 0x0C>;
+			reg = <0x03810000 0x0c>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>, <&clock CLK_FOUT_EPLL>;
 			clock-names = "pll_ref", "pll_in";
@@ -372,10 +372,10 @@
 &sromc {
 	#address-cells = <2>;
 	#size-cells = <1>;
-	ranges = <0 0 0x04000000 0x20000
-		  1 0 0x05000000 0x20000
-		  2 0 0x06000000 0x20000
-		  3 0 0x07000000 0x20000>;
+	ranges = <0 0 0x04000000 0x20000>,
+		 <1 0 0x05000000 0x20000>,
+		 <2 0 0x06000000 0x20000>,
+		 <3 0 0x07000000 0x20000>;
 };
 
 &trng {
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/samsung/exynos5420-arndale-octa.dts
index 55b7759682a9..809ddda02e53 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/samsung/exynos5420-arndale-octa.dts
@@ -23,6 +23,11 @@
 		reg = <0x20000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
 		stdout-path = "serial3:115200n8";
 	};
@@ -778,6 +783,7 @@
 	status = "okay";
 	non-removable;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
diff --git a/arch/arm/boot/dts/exynos5420-chagall-wifi.dts b/arch/arm/boot/dts/samsung/exynos5420-chagall-wifi.dts
index 1319344a2c74..1319344a2c74 100644
--- a/arch/arm/boot/dts/exynos5420-chagall-wifi.dts
+++ b/arch/arm/boot/dts/samsung/exynos5420-chagall-wifi.dts
diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/samsung/exynos5420-cpus.dtsi
index e9f4eb75b50f..e9f4eb75b50f 100644
--- a/arch/arm/boot/dts/exynos5420-cpus.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5420-cpus.dtsi
diff --git a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi b/arch/arm/boot/dts/samsung/exynos5420-galaxy-tab-common.dtsi
index d19bc3d266fa..246040967082 100644
--- a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5420-galaxy-tab-common.dtsi
@@ -28,13 +28,19 @@
 	 * for more details.
 	 */
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_1;
+		mmc2 = &mmc_2;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
 
 	memory@20000000 {
 		device_type = "memory";
-		reg = <0x20000000 0xc0000000>;
+		reg = <0x20000000 0xbfa00000>;
 	};
 
 	firmware@2073000 {
@@ -51,7 +57,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		pinctrl-names = "default";
 
 		key-power {
 			debounce-interval = <10>;
@@ -83,6 +88,13 @@
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 	};
+
+	mmc1_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpy7 7 GPIO_ACTIVE_LOW>;
+		clocks = <&s2mps11_osc S2MPS11_CLK_BT>;
+		clock-names = "ext_clock";
+	};
 };
 
 &cci {
@@ -605,6 +617,7 @@
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	non-removable;
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
@@ -615,6 +628,25 @@
 	vqmmc-supply = <&ldo3_reg>;
 };
 
+/* WiFi */
+&mmc_1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	card-detect-delay = <200>;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&mmc1_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>,
+		    <&sd1_bus4>, <&wifi_en>;
+	pinctrl-names = "default";
+	vqmmc-supply = <&ldo2_reg>;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	status = "okay";
+};
+
 /* External sdcard */
 &mmc_2 {
 	status = "okay";
@@ -644,6 +676,11 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
+
+	wifi_en: wifi-en-pins {
+		samsung,pins = "gpy7-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
 };
 
 &rtc {
diff --git a/arch/arm/boot/dts/exynos5420-klimt-wifi.dts b/arch/arm/boot/dts/samsung/exynos5420-klimt-wifi.dts
index 011787b1bbf0..011787b1bbf0 100644
--- a/arch/arm/boot/dts/exynos5420-klimt-wifi.dts
+++ b/arch/arm/boot/dts/samsung/exynos5420-klimt-wifi.dts
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/samsung/exynos5420-peach-pit.dts
index 9e2123470cad..3759742d38ca 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/samsung/exynos5420-peach-pit.dts
@@ -31,6 +31,9 @@
 	aliases {
 		/* Assign 20 so we don't get confused w/ builtin ones */
 		i2c20 = &i2c_tunnel;
+		mmc0 = &mmc_0; /* eMMC */
+		mmc1 = &mmc_2; /* uSD */
+		mmc2 = &mmc_1; /* WiFi */
 	};
 
 	backlight: backlight {
@@ -722,6 +725,7 @@
 /* eMMC flash */
 &mmc_0 {
 	status = "okay";
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	cap-mmc-highspeed;
 	non-removable;
@@ -963,6 +967,7 @@
 		reg = <0>;
 		spi-max-frequency = <3125000>;
 		google,has-vbc-nvram;
+		wakeup-source;
 
 		controller-data {
 			samsung,spi-feedback-delay = <1>;
@@ -1118,5 +1123,5 @@
 	timeout-sec = <32>;
 };
 
-#include "cros-ec-keyboard.dtsi"
-#include "cros-adc-thermistors.dtsi"
+#include "../cros-ec-keyboard.dtsi"
+#include "../cros-adc-thermistors.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/samsung/exynos5420-pinctrl.dtsi
index 14cf9c4ca0ed..93b9873fa84f 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5420-pinctrl.dtsi
@@ -6,7 +6,7 @@
  *		http://www.samsung.com
  *
  * Samsung's Exynos5420 SoC pin-mux and pin-config options are listed as device
- * tree nodes are listed in this file.
+ * tree nodes in this file.
  */
 
 #include "exynos-pinctrl.h"
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/samsung/exynos5420-smdk5420.dts
index 4d7b6d9008a7..e299344e427a 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/samsung/exynos5420-smdk5420.dts
@@ -21,6 +21,11 @@
 		reg = <0x20000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
 		bootargs = "init=/linuxrc";
 		stdout-path = "serial2:115200n8";
@@ -355,6 +360,7 @@
 	status = "okay";
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/samsung/exynos5420-trip-points.dtsi
index a67a380717ec..a67a380717ec 100644
--- a/arch/arm/boot/dts/exynos5420-trip-points.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5420-trip-points.dtsi
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/samsung/exynos5420.dtsi
index 9f2523a873d9..196c6d04675a 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5420.dtsi
@@ -7,7 +7,7 @@
  *
  * Samsung Exynos5420 SoC device nodes are listed in this file.
  * Exynos5420 based board files can include this file and provide
- * values for board specfic bindings.
+ * values for board specific bindings.
  */
 
 #include "exynos54xx.dtsi"
@@ -19,9 +19,6 @@
 	compatible = "samsung,exynos5420", "samsung,exynos5";
 
 	aliases {
-		mshc0 = &mmc_0;
-		mshc1 = &mmc_1;
-		mshc2 = &mmc_2;
 		pinctrl0 = &pinctrl_0;
 		pinctrl1 = &pinctrl_1;
 		pinctrl2 = &pinctrl_2;
@@ -37,12 +34,123 @@
 		spi2 = &spi_2;
 	};
 
+	bus_disp1: bus-disp1 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_disp1_fimd: bus-disp1-fimd {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_fsys2: bus-fsys2 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_fsys_apb: bus-fsys-apb {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_g2d: bus-g2d {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK333_G2D>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_g2d_acp: bus-g2d-acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK266_G2D>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+	bus_gen: bus-gen {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK266>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_gscl_scaler: bus-gscl-scaler {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_jpeg: bus-jpeg {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_jpeg_apb: bus-jpeg-apb {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK166>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK333>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_mscl: bus-mscl {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_noc: bus-noc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK100_NOC>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_peri: bus-peri {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK66>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_wcore: bus-wcore {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
 	/*
 	 * The 'cpus' node is not present here but instead it is provided
 	 * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
 	 */
 
-	cluster_a15_opp_table: opp-table0 {
+	cluster_a15_opp_table: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -108,7 +216,7 @@
 		};
 	};
 
-	cluster_a7_opp_table: opp-table1 {
+	cluster_a7_opp_table: opp-table-1 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -182,7 +290,7 @@
 
 		clock_audss: audss-clock-controller@3810000 {
 			compatible = "samsung,exynos5420-audss-clock";
-			reg = <0x03810000 0x0C>;
+			reg = <0x03810000 0x0c>;
 			#clock-cells = <1>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
 				 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
@@ -262,37 +370,37 @@
 
 		nocp_mem0_0: nocp@10ca1000 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1000 0x200>;
+			reg = <0x10ca1000 0x200>;
 			status = "disabled";
 		};
 
 		nocp_mem0_1: nocp@10ca1400 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1400 0x200>;
+			reg = <0x10ca1400 0x200>;
 			status = "disabled";
 		};
 
 		nocp_mem1_0: nocp@10ca1800 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1800 0x200>;
+			reg = <0x10ca1800 0x200>;
 			status = "disabled";
 		};
 
 		nocp_mem1_1: nocp@10ca1c00 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1C00 0x200>;
+			reg = <0x10ca1c00 0x200>;
 			status = "disabled";
 		};
 
 		nocp_g3d_0: nocp@11a51000 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x11A51000 0x200>;
+			reg = <0x11a51000 0x200>;
 			status = "disabled";
 		};
 
 		nocp_g3d_1: nocp@11a51400 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x11A51400 0x200>;
+			reg = <0x11a51400 0x200>;
 			status = "disabled";
 		};
 
@@ -374,14 +482,14 @@
 
 		disp_pd: power-domain@100440c0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440C0 0x20>;
+			reg = <0x100440c0 0x20>;
 			#power-domain-cells = <0>;
 			label = "DISP";
 		};
 
 		mau_pd: power-domain@100440e0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440E0 0x20>;
+			reg = <0x100440e0 0x20>;
 			#power-domain-cells = <0>;
 			label = "MAU";
 		};
@@ -442,7 +550,7 @@
 
 		pdma0: dma-controller@121a0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
+			reg = <0x121a0000 0x1000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
@@ -451,7 +559,7 @@
 
 		pdma1: dma-controller@121b0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
+			reg = <0x121b0000 0x1000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
@@ -469,7 +577,7 @@
 
 		mdma1: dma-controller@11c10000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
+			reg = <0x11c10000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA1>;
 			clock-names = "apb_pclk";
@@ -507,7 +615,7 @@
 
 		i2s1: i2s@12d60000 {
 			compatible = "samsung,exynos5420-i2s";
-			reg = <0x12D60000 0x100>;
+			reg = <0x12d60000 0x100>;
 			dmas = <&pdma1 12>,
 				<&pdma1 11>;
 			dma-names = "tx", "rx";
@@ -523,7 +631,7 @@
 
 		i2s2: i2s@12d70000 {
 			compatible = "samsung,exynos5420-i2s";
-			reg = <0x12D70000 0x100>;
+			reg = <0x12d70000 0x100>;
 			dmas = <&pdma0 12>,
 				<&pdma0 11>;
 			dma-names = "tx", "rx";
@@ -550,6 +658,7 @@
 			pinctrl-0 = <&spi0_bus>;
 			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
 			clock-names = "spi", "spi_busclk0";
+			fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -566,6 +675,7 @@
 			pinctrl-0 = <&spi1_bus>;
 			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
 			clock-names = "spi", "spi_busclk0";
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
@@ -582,22 +692,11 @@
 			pinctrl-0 = <&spi2_bus>;
 			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
 			clock-names = "spi", "spi_busclk0";
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
-		dp_phy: dp-video-phy {
-			compatible = "samsung,exynos5420-dp-video-phy";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <0>;
-		};
-
-		mipi_phy: mipi-video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			syscon = <&pmu_system_controller>;
-			#phy-cells = <1>;
-		};
-
-		dsi@14500000 {
+		dsi: dsi@14500000 {
 			compatible = "samsung,exynos5410-mipi-dsi";
 			reg = <0x14500000 0x10000>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -612,7 +711,7 @@
 
 		hsi2c_8: i2c@12e00000 {
 			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12E00000 0x1000>;
+			reg = <0x12e00000 0x1000>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -625,7 +724,7 @@
 
 		hsi2c_9: i2c@12e10000 {
 			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12E10000 0x1000>;
+			reg = <0x12e10000 0x1000>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -638,7 +737,7 @@
 
 		hsi2c_10: i2c@12e20000 {
 			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12E20000 0x1000>;
+			reg = <0x12e20000 0x1000>;
 			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -665,13 +764,13 @@
 			#sound-dai-cells = <0>;
 		};
 
-		hdmiphy: hdmiphy@145d0000 {
-			reg = <0x145D0000 0x20>;
+		hdmiphy: hdmi-phy@145d0000 {
+			reg = <0x145d0000 0x20>;
 		};
 
 		hdmicec: cec@101b0000 {
 			compatible = "samsung,s5p-cec";
-			reg = <0x101B0000 0x200>;
+			reg = <0x101b0000 0x200>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_HDMI_CEC>;
 			clock-names = "hdmicec";
@@ -696,7 +795,7 @@
 
 		rotator: rotator@11c00000 {
 			compatible = "samsung,exynos5250-rotator";
-			reg = <0x11C00000 0x64>;
+			reg = <0x11c00000 0x64>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_ROTATOR>;
 			clock-names = "rotator";
@@ -805,7 +904,7 @@
 
 		jpeg_0: jpeg@11f50000 {
 			compatible = "samsung,exynos5420-jpeg";
-			reg = <0x11F50000 0x1000>;
+			reg = <0x11f50000 0x1000>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "jpeg";
 			clocks = <&clock CLK_JPEG>;
@@ -814,7 +913,7 @@
 
 		jpeg_1: jpeg@11f60000 {
 			compatible = "samsung,exynos5420-jpeg";
-			reg = <0x11F60000 0x1000>;
+			reg = <0x11f60000 0x1000>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "jpeg";
 			clocks = <&clock CLK_JPEG2>;
@@ -822,7 +921,7 @@
 		};
 
 		pmu_system_controller: system-controller@10040000 {
-			compatible = "samsung,exynos5420-pmu", "syscon";
+			compatible = "samsung,exynos5420-pmu", "simple-mfd", "syscon";
 			reg = <0x10040000 0x5000>;
 			clock-names = "clkout16";
 			clocks = <&clock CLK_FIN_PLL>;
@@ -830,6 +929,16 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
+
+			dp_phy: dp-phy {
+				compatible = "samsung,exynos5420-dp-video-phy";
+				#phy-cells = <0>;
+			};
+
+			mipi_phy: mipi-phy {
+				compatible = "samsung,exynos5420-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
 
 		tmu_cpu0: tmu@10060000 {
@@ -879,7 +988,7 @@
 
 		sysmmu_g2dr: sysmmu@10a60000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A60000 0x1000>;
+			reg = <0x10a60000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <24 5>;
 			clock-names = "sysmmu", "master";
@@ -889,7 +998,7 @@
 
 		sysmmu_g2dw: sysmmu@10a70000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A70000 0x1000>;
+			reg = <0x10a70000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <22 2>;
 			clock-names = "sysmmu", "master";
@@ -910,7 +1019,7 @@
 
 		sysmmu_gscl0: sysmmu@13e80000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E80000 0x1000>;
+			reg = <0x13e80000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 0>;
 			clock-names = "sysmmu", "master";
@@ -921,7 +1030,7 @@
 
 		sysmmu_gscl1: sysmmu@13e90000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E90000 0x1000>;
+			reg = <0x13e90000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 2>;
 			clock-names = "sysmmu", "master";
@@ -953,7 +1062,7 @@
 
 		sysmmu_scaler2r: sysmmu@128a0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128A0000 0x1000>;
+			reg = <0x128a0000 0x1000>;
 			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
@@ -963,7 +1072,7 @@
 
 		sysmmu_scaler0w: sysmmu@128c0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128C0000 0x1000>;
+			reg = <0x128c0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <27 2>;
 			clock-names = "sysmmu", "master";
@@ -974,7 +1083,7 @@
 
 		sysmmu_scaler1w: sysmmu@128d0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128D0000 0x1000>;
+			reg = <0x128d0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <22 6>;
 			clock-names = "sysmmu", "master";
@@ -985,7 +1094,7 @@
 
 		sysmmu_scaler2w: sysmmu@128e0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128E0000 0x1000>;
+			reg = <0x128e0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <19 6>;
 			clock-names = "sysmmu", "master";
@@ -996,7 +1105,7 @@
 
 		sysmmu_rotator: sysmmu@11d40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11D40000 0x1000>;
+			reg = <0x11d40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 0>;
 			clock-names = "sysmmu", "master";
@@ -1006,7 +1115,7 @@
 
 		sysmmu_jpeg0: sysmmu@11f10000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11F10000 0x1000>;
+			reg = <0x11f10000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 2>;
 			clock-names = "sysmmu", "master";
@@ -1016,7 +1125,7 @@
 
 		sysmmu_jpeg1: sysmmu@11f20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11F20000 0x1000>;
+			reg = <0x11f20000 0x1000>;
 			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
@@ -1066,118 +1175,6 @@
 			power-domains = <&disp_pd>;
 			#iommu-cells = <0>;
 		};
-
-		bus_wcore: bus-wcore {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_noc: bus-noc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK100_NOC>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_fsys_apb: bus-fsys-apb {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_fsys: bus-fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_fsys2: bus-fsys2 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_mfc: bus-mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK333>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_gen: bus-gen {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK266>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_peri: bus-peri {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK66>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_g2d: bus-g2d {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK333_G2D>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_g2d_acp: bus-g2d-acp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK266_G2D>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_jpeg: bus-jpeg {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_jpeg_apb: bus-jpeg-apb {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK166>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_disp1_fimd: bus-disp1-fimd {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_disp1: bus-disp1 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_gscl_scaler: bus-gscl-scaler {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_mscl: bus-mscl {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
-			clock-names = "bus";
-			status = "disabled";
-		};
 	};
 
 	thermal-zones {
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/samsung/exynos5422-cpus.dtsi
index 412a0bb4b988..412a0bb4b988 100644
--- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5422-cpus.dtsi
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/samsung/exynos5422-odroid-core.dtsi
index 35818c4cd852..2f5b8602e020 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5422-odroid-core.dtsi
@@ -16,7 +16,11 @@
 / {
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x7EA00000>;
+		reg = <0x40000000 0x7ea00000>;
+	};
+
+	aliases {
+		mmc2 = &mmc_2;
 	};
 
 	chosen {
@@ -35,7 +39,7 @@
 		};
 	};
 
-	bus_wcore_opp_table: opp-table2 {
+	bus_wcore_opp_table: opp-table-2 {
 		compatible = "operating-points-v2";
 
 		/* derived from 532MHz MPLL */
@@ -61,7 +65,7 @@
 		};
 	};
 
-	bus_noc_opp_table: opp-table3 {
+	bus_noc_opp_table: opp-table-3 {
 		compatible = "operating-points-v2";
 
 		/* derived from 666MHz CPLL */
@@ -79,7 +83,7 @@
 		};
 	};
 
-	bus_fsys_apb_opp_table: opp-table4 {
+	bus_fsys_apb_opp_table: opp-table-4 {
 		compatible = "operating-points-v2";
 
 		/* derived from 666MHz CPLL */
@@ -91,7 +95,7 @@
 		};
 	};
 
-	bus_fsys2_opp_table: opp-table5 {
+	bus_fsys2_opp_table: opp-table-5 {
 		compatible = "operating-points-v2";
 
 		/* derived from 600MHz DPLL */
@@ -106,7 +110,7 @@
 		};
 	};
 
-	bus_mfc_opp_table: opp-table6 {
+	bus_mfc_opp_table: opp-table-6 {
 		compatible = "operating-points-v2";
 
 		/* derived from 666MHz CPLL */
@@ -127,7 +131,7 @@
 		};
 	};
 
-	bus_gen_opp_table: opp-table7 {
+	bus_gen_opp_table: opp-table-7 {
 		compatible = "operating-points-v2";
 
 		/* derived from 532MHz MPLL */
@@ -145,7 +149,7 @@
 		};
 	};
 
-	bus_peri_opp_table: opp-table8 {
+	bus_peri_opp_table: opp-table-8 {
 		compatible = "operating-points-v2";
 
 		/* derived from 666MHz CPLL */
@@ -154,7 +158,7 @@
 		};
 	};
 
-	bus_g2d_opp_table: opp-table9 {
+	bus_g2d_opp_table: opp-table-9 {
 		compatible = "operating-points-v2";
 
 		/* derived from 666MHz CPLL */
@@ -175,7 +179,7 @@
 		};
 	};
 
-	bus_g2d_acp_opp_table: opp-table10 {
+	bus_g2d_acp_opp_table: opp-table-10 {
 		compatible = "operating-points-v2";
 
 		/* derived from 532MHz MPLL */
@@ -193,7 +197,7 @@
 		};
 	};
 
-	bus_jpeg_opp_table: opp-table11 {
+	bus_jpeg_opp_table: opp-table-11 {
 		compatible = "operating-points-v2";
 
 		/* derived from 600MHz DPLL */
@@ -211,7 +215,7 @@
 		};
 	};
 
-	bus_jpeg_apb_opp_table: opp-table12 {
+	bus_jpeg_apb_opp_table: opp-table-12 {
 		compatible = "operating-points-v2";
 
 		/* derived from 666MHz CPLL */
@@ -229,7 +233,7 @@
 		};
 	};
 
-	bus_disp1_fimd_opp_table: opp-table13 {
+	bus_disp1_fimd_opp_table: opp-table-13 {
 		compatible = "operating-points-v2";
 
 		/* derived from 600MHz DPLL */
@@ -241,7 +245,7 @@
 		};
 	};
 
-	bus_disp1_opp_table: opp-table14 {
+	bus_disp1_opp_table: opp-table-14 {
 		compatible = "operating-points-v2";
 
 		/* derived from 600MHz DPLL */
@@ -256,7 +260,7 @@
 		};
 	};
 
-	bus_gscl_opp_table: opp-table15 {
+	bus_gscl_opp_table: opp-table-15 {
 		compatible = "operating-points-v2";
 
 		/* derived from 600MHz DPLL */
@@ -271,7 +275,7 @@
 		};
 	};
 
-	bus_mscl_opp_table: opp-table16 {
+	bus_mscl_opp_table: opp-table-16 {
 		compatible = "operating-points-v2";
 
 		/* derived from 666MHz CPLL */
@@ -292,7 +296,7 @@
 		};
 	};
 
-	dmc_opp_table: opp-table17 {
+	dmc_opp_table: opp-table-17 {
 		compatible = "operating-points-v2";
 
 		opp00 {
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/samsung/exynos5422-odroidhc1.dts
index 3de7019572a2..5e4280393706 100644
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/samsung/exynos5422-odroidhc1.dts
@@ -31,7 +31,7 @@
 
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
+			thermal-sensors = <&tmu_cpu0>;
 			trips {
 				cpu0_alert0: cpu-alert-0 {
 					temperature = <70000>; /* millicelsius */
@@ -86,7 +86,7 @@
 			};
 		};
 		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1 0>;
+			thermal-sensors = <&tmu_cpu1>;
 			trips {
 				cpu1_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -130,7 +130,7 @@
 			};
 		};
 		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2 0>;
+			thermal-sensors = <&tmu_cpu2>;
 			trips {
 				cpu2_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -174,7 +174,7 @@
 			};
 		};
 		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3 0>;
+			thermal-sensors = <&tmu_cpu3>;
 			trips {
 				cpu3_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -218,7 +218,7 @@
 			};
 		};
 		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu 0>;
+			thermal-sensors = <&tmu_gpu>;
 			trips {
 				gpu_alert0: gpu-alert-0 {
 					temperature = <70000>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/samsung/exynos5422-odroidxu3-audio.dtsi
index 86b96f9706db..52a1d8fd5452 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5422-odroidxu3-audio.dtsi
@@ -18,16 +18,15 @@
 		samsung,audio-widgets =
 			"Headphone", "Headphone Jack",
 			"Speakers", "Speakers";
-		samsung,audio-routing =
-			"Headphone Jack", "HPL",
-			"Headphone Jack", "HPR",
-			"Headphone Jack", "MICBIAS",
-			"IN12", "Headphone Jack",
-			"Speakers", "SPKL",
-			"Speakers", "SPKR",
-			"I2S Playback", "Mixer DAI TX",
-			"HiFi Playback", "Mixer DAI TX",
-			"Mixer DAI RX", "HiFi Capture";
+		audio-routing = "Headphone Jack", "HPL",
+				"Headphone Jack", "HPR",
+				"Headphone Jack", "MICBIAS",
+				"IN12", "Headphone Jack",
+				"Speakers", "SPKL",
+				"Speakers", "SPKR",
+				"I2S Playback", "Mixer DAI TX",
+				"HiFi Playback", "Mixer DAI TX",
+				"Mixer DAI RX", "HiFi Capture";
 
 		cpu {
 			sound-dai = <&i2s0 0>, <&i2s0 1>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/samsung/exynos5422-odroidxu3-common.dtsi
index a6961ff24030..4a4c55a4beb3 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5422-odroidxu3-common.dtsi
@@ -13,6 +13,10 @@
 #include "exynos5422-odroid-core.dtsi"
 
 / {
+	aliases {
+		mmc0 = &mmc_0;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -50,8 +54,8 @@
 
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
-			polling-delay-passive = <250>;
+			thermal-sensors = <&tmu_cpu0>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				cpu0_alert0: cpu-alert-0 {
@@ -74,12 +78,6 @@
 					hysteresis = <0>; /* millicelsius */
 					type = "critical";
 				};
-				/*
-				 * Exynos542x supports only 4 trip-points
-				 * so for these polling mode is required.
-				 * Start polling at temperature level of last
-				 * interrupt-driven trip: cpu0_alert2
-				 */
 				cpu0_alert3: cpu-alert-3 {
 					temperature = <70000>; /* millicelsius */
 					hysteresis = <10000>; /* millicelsius */
@@ -139,8 +137,8 @@
 			};
 		};
 		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1 0>;
-			polling-delay-passive = <250>;
+			thermal-sensors = <&tmu_cpu1>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				cpu1_alert0: cpu-alert-0 {
@@ -212,8 +210,8 @@
 			};
 		};
 		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2 0>;
-			polling-delay-passive = <250>;
+			thermal-sensors = <&tmu_cpu2>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				cpu2_alert0: cpu-alert-0 {
@@ -285,8 +283,8 @@
 			};
 		};
 		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3 0>;
-			polling-delay-passive = <250>;
+			thermal-sensors = <&tmu_cpu3>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				cpu3_alert0: cpu-alert-0 {
@@ -358,8 +356,8 @@
 			};
 		};
 		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu 0>;
-			polling-delay-passive = <250>;
+			thermal-sensors = <&tmu_gpu>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				gpu_alert0: gpu-alert-0 {
@@ -472,6 +470,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	max-frequency = <200000000>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/samsung/exynos5422-odroidxu3-lite.dts
index e3154a1cae23..e3154a1cae23 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/samsung/exynos5422-odroidxu3-lite.dts
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/samsung/exynos5422-odroidxu3.dts
index a378d4937ff7..a378d4937ff7 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/samsung/exynos5422-odroidxu3.dts
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/samsung/exynos5422-odroidxu4.dts
index f5fb617f46bd..363786f032cc 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
+++ b/arch/arm/boot/dts/samsung/exynos5422-odroidxu4.dts
@@ -35,7 +35,7 @@
 		compatible = "samsung,odroid-xu3-audio";
 		model = "Odroid-XU4";
 
-		samsung,audio-routing = "I2S Playback", "Mixer DAI TX";
+		audio-routing = "I2S Playback", "Mixer DAI TX";
 
 		cpu {
 			sound-dai = <&i2s0 0>, <&i2s0 1>;
diff --git a/arch/arm/boot/dts/samsung/exynos5422-samsung-k3g.dts b/arch/arm/boot/dts/samsung/exynos5422-samsung-k3g.dts
new file mode 100644
index 000000000000..c35261a338ff
--- /dev/null
+++ b/arch/arm/boot/dts/samsung/exynos5422-samsung-k3g.dts
@@ -0,0 +1,679 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy S5 (SM-G900H) device-tree source
+ *
+ * Copyright (c) 2023 Markuss Broks
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "exynos5800.dtsi"
+#include "exynos5422-cpus.dtsi"
+
+/ {
+	model = "Samsung Galaxy S5 (SM-G900H)";
+	compatible = "samsung,k3g", "samsung,exynos5800", \
+		     "samsung,exynos5";
+
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc_0;
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x80000000>; /* 2 GiB */
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	firmware@2073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+
+	tsp_vdd: regulator-tsp-vdd-en {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_vdd_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpy3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&buck4_reg>;
+};
+
+&hsi2c_7 {
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+
+		interrupt-parent = <&gpx0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&s2mps11_irq>;
+
+		s2mps11_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps11_ap",
+					     "s2mps11_cp", "s2mps11_bt";
+		};
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_INT";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_G3D";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDD_MEM";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "VDD_KFC";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VIN_LLDO";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "VIN_MLDO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-always-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VIN_HLDO";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-always-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "VDD_CAM_ISP";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3550000>;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_APIO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDD_APIO_MMC01";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDD_ADC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDD_HRM_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD_MIPI";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD_MIPI_PLL_ABB1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD_VTF";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD_UOTG";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDDQ_PRE";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD_HSIC_1V0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD_HSIC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDD_APIO_MMC2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD_MOTOR";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD_CAM1_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				/* Unused */
+				regulator-name = "VDD_LDO17";
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "VDD_CODEC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VDD_VMMC";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VDD_CAM1_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VDD_CAM_IO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VDD_CAM0_S_CORE";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "VDD_MIFS";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VDD_MHL_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "VDD_LCD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "VDD_CAM0_AF";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "VDD_G3DS";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "VDD_LCD_3V0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo29_reg: LDO29 {
+				/* Unused */
+				regulator-name = "VDD_LDO29";
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "VDD_TOUCH";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo31_reg: LDO31 {
+				regulator-name = "VDD_COMP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo32_reg: LDO32 {
+				regulator-name = "VDD_TOUCH_IO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "VDD_MHL_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "VDD_HRM_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "VDD_SIL";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo36_reg: LDO36 {
+				/* Unused */
+				regulator-name = "VDD_LDO36";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo37_reg: LDO37 {
+				/* Unused */
+				regulator-name = "VDD_LDO37";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo38_reg: LDO38 {
+				regulator-name = "VDD_KEY_LED";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c_0 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		interrupt-parent = <&gpx1>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		vio-supply = <&ldo32_reg>;
+		vdd-supply = <&tsp_vdd>;
+		syna,startup-delay-ms = <100>;
+
+		pinctrl-0 = <&touch_irq>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+/* eMMC flash */
+&mmc_0 {
+	status = "okay";
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	cap-mmc-highspeed;
+	non-removable;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+	samsung,read-strobe-delay = <90>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
+	bus-width = <8>;
+};
+
+&pinctrl_0 {
+	s2mps11_irq: s2mps11-irq-pins {
+		samsung,pins = "gpx0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	touch_irq: touch-irq-pins {
+		samsung,pins = "gpx1-6";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&timer {
+	arm,cpu-registers-not-fw-configured;
+};
+
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd3_0 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/samsung/exynos54xx-odroidxu-leds.dtsi
index 8c0e1716c0b3..8c0e1716c0b3 100644
--- a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos54xx-odroidxu-leds.dtsi
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/samsung/exynos54xx.dtsi
index 3ec43761d8b9..5c799886c275 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos54xx.dtsi
@@ -142,15 +142,15 @@
 			status = "disabled";
 		};
 
-		usbdrd3_0: usb3-0 {
+		usbdrd3_0: usb@12000000 {
 			compatible = "samsung,exynos5250-dwusb3";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x12000000 0x10000>;
 
-			usbdrd_dwc3_0: usb@12000000 {
+			usbdrd_dwc3_0: usb@0 {
 				compatible = "snps,dwc3";
-				reg = <0x12000000 0x10000>;
+				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
 				phy-names = "usb2-phy", "usb3-phy";
@@ -164,15 +164,15 @@
 			#phy-cells = <1>;
 		};
 
-		usbdrd3_1: usb3-1 {
+		usbdrd3_1: usb@12400000 {
 			compatible = "samsung,exynos5250-dwusb3";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x12400000 0x10000>;
 
-			usbdrd_dwc3_1: usb@12400000 {
+			usbdrd_dwc3_1: usb@0 {
 				compatible = "snps,dwc3";
-				reg = <0x12400000 0x10000>;
+				reg = <0x0 0x10000>;
 				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,dis_u3_susphy_quirk;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/samsung/exynos5800-peach-pi.dts
index 0ebcb66c6319..bb019868b996 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/samsung/exynos5800-peach-pi.dts
@@ -29,6 +29,9 @@
 	aliases {
 		/* Assign 20 so we don't get confused w/ builtin ones */
 		i2c20 = &i2c_tunnel;
+		mmc0 = &mmc_0; /* eMMC */
+		mmc1 = &mmc_2; /* SD */
+		mmc2 = &mmc_1; /* WiFi */
 	};
 
 	backlight: backlight {
@@ -182,7 +185,7 @@
 	samsung,color-depth = <1>;
 	samsung,link-rate = <0x0a>;
 	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
 
 	ports {
 		port {
@@ -703,6 +706,7 @@
 /* eMMC flash */
 &mmc_0 {
 	status = "okay";
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	cap-mmc-highspeed;
@@ -945,6 +949,7 @@
 		reg = <0>;
 		spi-max-frequency = <3125000>;
 		google,has-vbc-nvram;
+		wakeup-source;
 
 		controller-data {
 			samsung,spi-feedback-delay = <1>;
@@ -1100,5 +1105,5 @@
 	timeout-sec = <32>;
 };
 
-#include "cros-ec-keyboard.dtsi"
-#include "cros-adc-thermistors.dtsi"
+#include "../cros-ec-keyboard.dtsi"
+#include "../cros-adc-thermistors.dtsi"
diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/samsung/exynos5800.dtsi
index 526729dad53f..72d3a3535a7a 100644
--- a/arch/arm/boot/dts/exynos5800.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5800.dtsi
@@ -7,7 +7,7 @@
  *
  * Samsung Exynos5800 SoC device nodes are listed in this file.
  * Exynos5800 based board files can include this file and provide
- * values for board specfic bindings.
+ * values for board specific bindings.
  */
 
 #include "exynos5420.dtsi"
@@ -148,6 +148,10 @@
 	};
 };
 
+&dsi {
+	compatible = "samsung,exynos5422-mipi-dsi";
+};
+
 &mfc {
 	compatible = "samsung,mfc-v8";
 };
diff --git a/arch/arm/boot/dts/s3c6400.dtsi b/arch/arm/boot/dts/samsung/s3c6400.dtsi
index 8c28e8a0c824..7cc785a63866 100644
--- a/arch/arm/boot/dts/s3c6400.dtsi
+++ b/arch/arm/boot/dts/samsung/s3c6400.dtsi
@@ -5,7 +5,7 @@
  * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
  *
  * Samsung's S3C6400 SoC device nodes are listed in this file. S3C6400
- * based board files can include this file and provide values for board specfic
+ * based board files can include this file and provide values for board specific
  * bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/samsung/s3c6410-mini6410.dts
index 17097da36f5e..0b07b3c31960 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/samsung/s3c6410-mini6410.dts
@@ -51,7 +51,7 @@
 
 		ethernet@18000000 {
 			compatible = "davicom,dm9000";
-			reg = <0x18000000 0x2 0x18000004 0x2>;
+			reg = <0x18000000 0x2>, <0x18000004 0x2>;
 			interrupt-parent = <&gpn>;
 			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 			davicom,no-eeprom;
diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/samsung/s3c6410-smdk6410.dts
index 581309e7f15e..581309e7f15e 100644
--- a/arch/arm/boot/dts/s3c6410-smdk6410.dts
+++ b/arch/arm/boot/dts/samsung/s3c6410-smdk6410.dts
diff --git a/arch/arm/boot/dts/s3c6410.dtsi b/arch/arm/boot/dts/samsung/s3c6410.dtsi
index a766d6de696c..13e9cc69b8a8 100644
--- a/arch/arm/boot/dts/s3c6410.dtsi
+++ b/arch/arm/boot/dts/samsung/s3c6410.dtsi
@@ -5,7 +5,7 @@
  * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
  *
  * Samsung's S3C6410 SoC device nodes are listed in this file. S3C6410
- * based board files can include this file and provide values for board specfic
+ * based board files can include this file and provide values for board specific
  * bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/samsung/s3c64xx-pinctrl.dtsi
index f53959b7d031..f53959b7d031 100644
--- a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
+++ b/arch/arm/boot/dts/samsung/s3c64xx-pinctrl.dtsi
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.h b/arch/arm/boot/dts/samsung/s3c64xx-pinctrl.h
index 645c591db357..645c591db357 100644
--- a/arch/arm/boot/dts/s3c64xx-pinctrl.h
+++ b/arch/arm/boot/dts/samsung/s3c64xx-pinctrl.h
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/samsung/s3c64xx.dtsi
index c03df6355500..0b59135ffe88 100644
--- a/arch/arm/boot/dts/s3c64xx.dtsi
+++ b/arch/arm/boot/dts/samsung/s3c64xx.dtsi
@@ -6,7 +6,7 @@
  *
  * Samsung's S3C64xx SoC series device nodes are listed in this file.
  * Particular SoCs from S3C64xx series can include this file and provide
- * values for SoCs specfic bindings.
+ * values for SoCs specific bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
  * S3C64xx SoCs. As device tree coverage for S3C64xx increases, additional
diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/samsung/s5pv210-aquila.dts
index 0f5c6cd0f3a1..e9ec2cc718e0 100644
--- a/arch/arm/boot/dts/s5pv210-aquila.dts
+++ b/arch/arm/boot/dts/samsung/s5pv210-aquila.dts
@@ -62,7 +62,7 @@
 		regulator-max-microvolt = <3700000>;
 	};
 
-	i2c_pmic: i2c-pmic {
+	i2c_pmic: i2c-3 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>;
 		scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/samsung/s5pv210-aries.dtsi
index 5541df4df628..0a1a35f4f7cc 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/samsung/s5pv210-aries.dtsi
@@ -102,7 +102,7 @@
 		power-off-delay-us = <500>;
 	};
 
-	i2c_sound: i2c-gpio-0 {
+	i2c_sound: i2c-3 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&mp05 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&mp05 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -135,8 +135,8 @@
 					0xa101 0x0100 0x8100 0x0100 0x0100
 					0x0100>;
 
-			wlf,ldo1ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
-			wlf,ldo2ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
+			wlf,ldo1ena-gpios = <&gpf3 4 GPIO_ACTIVE_HIGH>;
+			wlf,ldo2ena-gpios = <&gpf3 4 GPIO_ACTIVE_HIGH>;
 
 			wlf,lineout1-se;
 			wlf,lineout2-se;
@@ -150,7 +150,7 @@
 		};
 	};
 
-	i2c_accel: i2c-gpio-1 {
+	i2c_accel: i2c-4 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -170,7 +170,7 @@
 		};
 	};
 
-	i2c_pmic: i2c-gpio-2 {
+	i2c_pmic: i2c-5 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -420,7 +420,7 @@
 		};
 	};
 
-	i2c_musb: i2c-gpio-3 {
+	i2c_musb: i2c-6 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpj3 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpj3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -442,7 +442,7 @@
 		};
 	};
 
-	i2c_fuel: i2c-gpio-4 {
+	i2c_fuel: i2c-7 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -459,7 +459,7 @@
 		};
 	};
 
-	i2c_touchkey: i2c-gpio-5 {
+	i2c_touchkey: i2c-8 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpj3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpj3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -485,7 +485,7 @@
 		};
 	};
 
-	i2c_prox: i2c-gpio-6 {
+	i2c_prox: i2c-9 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -513,7 +513,7 @@
 		};
 	};
 
-	i2c_magnetometer: i2c-gpio-7 {
+	i2c_magnetometer: i2c-10 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -738,7 +738,7 @@
 		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 	};
 
-	magnetometer_i2c_pins: yas529-i2c-pins-pins {
+	magnetometer_i2c_pins: yas529-i2c-pins {
 		samsung,pins = "gpj0-0", "gpj0-1";
 		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
@@ -788,7 +788,7 @@
 		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	pmic_i2c_pins: pmic-i2c-pins-pins {
+	pmic_i2c_pins: pmic-i2c-pins {
 		samsung,pins = "gpj4-0", "gpj4-3";
 		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
@@ -855,7 +855,7 @@
 	assigned-clock-rates = <0>, <50000000>;
 	assigned-clock-parents = <&clocks MOUT_MPLL>;
 
-	wlan@1 {
+	wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gph2>;
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/samsung/s5pv210-fascinate4g.dts
index eaa7c4f0e257..149e488f8e74 100644
--- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ b/arch/arm/boot/dts/samsung/s5pv210-fascinate4g.dts
@@ -74,30 +74,29 @@
 		headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_HIGH>;
 		headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>;
 
-		samsung,audio-routing =
-			"HP", "HPOUT1L",
-			"HP", "HPOUT1R",
+		audio-routing = "HP", "HPOUT1L",
+				"HP", "HPOUT1R",
 
-			"SPK", "SPKOUTLN",
-			"SPK", "SPKOUTLP",
+				"SPK", "SPKOUTLN",
+				"SPK", "SPKOUTLP",
 
-			"RCV", "HPOUT2N",
-			"RCV", "HPOUT2P",
+				"RCV", "HPOUT2N",
+				"RCV", "HPOUT2P",
 
-			"LINE", "LINEOUT2N",
-			"LINE", "LINEOUT2P",
+				"LINE", "LINEOUT2N",
+				"LINE", "LINEOUT2P",
 
-			"IN1LP", "Main Mic",
-			"IN1LN", "Main Mic",
+				"IN1LP", "Main Mic",
+				"IN1LN", "Main Mic",
 
-			"IN1RP", "Headset Mic",
-			"IN1RN", "Headset Mic",
+				"IN1RP", "Headset Mic",
+				"IN1RN", "Headset Mic",
 
-			"Modem Out", "Modem TX",
-			"Modem RX", "Modem In",
+				"Modem Out", "Modem TX",
+				"Modem RX", "Modem In",
 
-			"Bluetooth SPK", "TX",
-			"RX", "Bluetooth Mic";
+				"Bluetooth SPK", "TX",
+				"RX", "Bluetooth Mic";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&headset_det &earpath_sel>;
diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/samsung/s5pv210-galaxys.dts
index cdd3653d487f..5863a1300cc1 100644
--- a/arch/arm/boot/dts/s5pv210-galaxys.dts
+++ b/arch/arm/boot/dts/samsung/s5pv210-galaxys.dts
@@ -51,7 +51,7 @@
 		};
 	};
 
-	i2c_fmradio: i2c-gpio-8 {
+	i2c_fmradio: i2c-11 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpd1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpd1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -101,33 +101,32 @@
 		headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_LOW>;
 		headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>;
 
-		samsung,audio-routing =
-			"HP", "HPOUT1L",
-			"HP", "HPOUT1R",
+		audio-routing = "HP", "HPOUT1L",
+				"HP", "HPOUT1R",
 
-			"SPK", "SPKOUTLN",
-			"SPK", "SPKOUTLP",
+				"SPK", "SPKOUTLN",
+				"SPK", "SPKOUTLP",
 
-			"RCV", "HPOUT2N",
-			"RCV", "HPOUT2P",
+				"RCV", "HPOUT2N",
+				"RCV", "HPOUT2P",
 
-			"LINE", "LINEOUT2N",
-			"LINE", "LINEOUT2P",
+				"LINE", "LINEOUT2N",
+				"LINE", "LINEOUT2P",
 
-			"IN1LP", "Main Mic",
-			"IN1LN", "Main Mic",
+				"IN1LP", "Main Mic",
+				"IN1LN", "Main Mic",
 
-			"IN1RP", "Headset Mic",
-			"IN1RN", "Headset Mic",
+				"IN1RP", "Headset Mic",
+				"IN1RN", "Headset Mic",
 
-			"IN2LN", "FM In",
-			"IN2RN", "FM In",
+				"IN2LN", "FM In",
+				"IN2RN", "FM In",
 
-			"Modem Out", "Modem TX",
-			"Modem RX", "Modem In",
+				"Modem Out", "Modem TX",
+				"Modem RX", "Modem In",
 
-			"Bluetooth SPK", "TX",
-			"RX", "Bluetooth Mic";
+				"Bluetooth SPK", "TX",
+				"RX", "Bluetooth Mic";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&headset_det &earpath_sel>;
@@ -150,7 +149,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep_cfg>;
 
-	fm_i2c_pins: fm-i2c-pins-pins {
+	fm_i2c_pins: fm-i2c-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
 		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/samsung/s5pv210-goni.dts
index d32f42dd1bf5..079581f4dfec 100644
--- a/arch/arm/boot/dts/s5pv210-goni.dts
+++ b/arch/arm/boot/dts/samsung/s5pv210-goni.dts
@@ -74,7 +74,7 @@
 		enable-active-high;
 	};
 
-	i2c_pmic: i2c-pmic {
+	i2c_pmic: i2c-3 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>;
 		scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/samsung/s5pv210-pinctrl.dtsi
index 6d6daef9fb7a..6ecdd504e5f4 100644
--- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/samsung/s5pv210-pinctrl.dtsi
@@ -1,25 +1,21 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Samsung's S5PV210 SoC device tree source
+ * Samsung's S5PV210 SoC device tree source - pin control-related
+ * definitions
  *
  * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
  *
  * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
  * Tomasz Figa <t.figa@samsung.com>
  *
- * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
- * nodes can be added to this file.
+ * Samsung's S5PV210 SoC pin banks, pin-mux and pin-config options are
+ * listed as device tree nodes in this file.
  */
 
 #include "s5pv210-pinctrl.h"
 
 #define PIN_SLP(_pin, _mode, _pull)					\
-	_pin {								\
+	pin- ## _pin {							\
 		samsung,pins = #_pin;					\
 		samsung,pin-con-pdn = <S5PV210_PIN_PDN_ ##_mode>;	\
 		samsung,pin-pud-pdn = <S5PV210_PIN_PULL_ ##_pull>;	\
@@ -836,12 +832,12 @@
 	};
 
 	lcd_data24: lcd-data-width24-pins {
-		samsung,pins =  "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
-				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
-				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
-				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
-				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+		samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+			       "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+			       "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+			       "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+			       "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
 		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
 		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.h b/arch/arm/boot/dts/samsung/s5pv210-pinctrl.h
index 29bdf376d8f1..29bdf376d8f1 100644
--- a/arch/arm/boot/dts/s5pv210-pinctrl.h
+++ b/arch/arm/boot/dts/samsung/s5pv210-pinctrl.h
diff --git a/arch/arm/boot/dts/s5pv210-smdkc110.dts b/arch/arm/boot/dts/samsung/s5pv210-smdkc110.dts
index 0c623b78af72..0c623b78af72 100644
--- a/arch/arm/boot/dts/s5pv210-smdkc110.dts
+++ b/arch/arm/boot/dts/samsung/s5pv210-smdkc110.dts
diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/samsung/s5pv210-smdkv210.dts
index fbae768d65e2..901e7197b136 100644
--- a/arch/arm/boot/dts/s5pv210-smdkv210.dts
+++ b/arch/arm/boot/dts/samsung/s5pv210-smdkv210.dts
@@ -41,7 +41,7 @@
 
 	ethernet@a8000000 {
 		compatible = "davicom,dm9000";
-		reg = <0xA8000000 0x2 0xA8000002 0x2>;
+		reg = <0xa8000000 0x2>, <0xa8000002 0x2>;
 		interrupt-parent = <&gph1>;
 		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 		local-mac-address = [00 00 de ad be ef];
@@ -55,6 +55,14 @@
 		default-brightness-level = <6>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm3_out>;
+		power-supply = <&dc5v_reg>;
+	};
+
+	dc5v_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "DC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/s5pv210-torbreck.dts b/arch/arm/boot/dts/samsung/s5pv210-torbreck.dts
index e18259737684..e18259737684 100644
--- a/arch/arm/boot/dts/s5pv210-torbreck.dts
+++ b/arch/arm/boot/dts/samsung/s5pv210-torbreck.dts
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/samsung/s5pv210.dtsi
index 12e90a1cc6a1..34e8a3d5efa5 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/samsung/s5pv210.dtsi
@@ -8,7 +8,7 @@
  * Tomasz Figa <t.figa@samsung.com>
  *
  * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
- * based board files can include this file and provide values for board specfic
+ * based board files can include this file and provide values for board specific
  * bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
@@ -72,7 +72,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		onenand: onenand@b0600000 {
+		onenand: nand-controller@b0600000 {
 			compatible = "samsung,s5pv210-onenand";
 			reg = <0xb0600000 0x2000>,
 				<0xb0000000 0x20000>,
@@ -82,7 +82,7 @@
 			clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>;
 			clock-names = "bus", "onenand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -161,6 +161,7 @@
 			pinctrl-0 = <&spi0_bus>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -177,6 +178,7 @@
 			pinctrl-0 = <&spi1_bus>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
@@ -401,7 +403,7 @@
 			status = "disabled";
 		};
 
-		hsotg: hsotg@ec000000 {
+		hsotg: usb@ec000000 {
 			compatible = "samsung,s3c6400-hsotg";
 			reg = <0xec000000 0x20000>;
 			interrupt-parent = <&vic1>;
@@ -452,8 +454,8 @@
 			reg = <0xf1700000 0x10000>;
 			interrupt-parent = <&vic2>;
 			interrupts = <14>;
-			clocks = <&clocks DOUT_MFC>, <&clocks CLK_MFC>;
-			clock-names = "sclk_mfc", "mfc";
+			clocks = <&clocks CLK_MFC>, <&clocks DOUT_MFC>;
+			clock-names = "mfc", "sclk_mfc";
 		};
 
 		vic0: interrupt-controller@f2000000 {
@@ -547,26 +549,24 @@
 			status = "disabled";
 		};
 
-		camera: camera {
-			compatible = "samsung,fimc", "simple-bus";
-			pinctrl-names = "default";
-			pinctrl-0 = <>;
+		camera: camera@fa600000 {
+			compatible = "samsung,fimc";
+			ranges = <0x0 0xfa600000 0xe01000>;
 			clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>;
 			clock-names = "sclk_cam0", "sclk_cam1";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#clock-cells = <1>;
 			clock-output-names = "cam_a_clkout", "cam_b_clkout";
-			ranges;
 
-			csis0: csis@fa600000 {
+			csis0: csis@0 {
 				compatible = "samsung,s5pv210-csis";
-				reg = <0xfa600000 0x4000>;
+				reg = <0x00000000 0x4000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <29>;
 				clocks = <&clocks CLK_CSIS>,
 						<&clocks SCLK_CSIS>;
-				clock-names = "clk_csis",
+				clock-names = "csis",
 						"sclk_csis";
 				bus-width = <4>;
 				status = "disabled";
@@ -574,9 +574,9 @@
 				#size-cells = <0>;
 			};
 
-			fimc0: fimc@fb200000 {
+			fimc0: fimc@c00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb200000 0x1000>;
+				reg = <0x00c00000 0x1000>;
 				interrupts = <5>;
 				interrupt-parent = <&vic2>;
 				clocks = <&clocks CLK_FIMC0>,
@@ -588,9 +588,9 @@
 				samsung,cam-if;
 			};
 
-			fimc1: fimc@fb300000 {
+			fimc1: fimc@d00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb300000 0x1000>;
+				reg = <0x00d00000 0x1000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <6>;
 				clocks = <&clocks CLK_FIMC1>,
@@ -604,9 +604,9 @@
 				samsung,lcd-wb;
 			};
 
-			fimc2: fimc@fb400000 {
+			fimc2: fimc@e00000 {
 				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb400000 0x1000>;
+				reg = <0x00e00000 0x1000>;
 				interrupt-parent = <&vic2>;
 				interrupts = <7>;
 				clocks = <&clocks CLK_FIMC2>,
diff --git a/arch/arm/boot/dts/sigmastar/Makefile b/arch/arm/boot/dts/sigmastar/Makefile
new file mode 100644
index 000000000000..b07eaf5d8add
--- /dev/null
+++ b/arch/arm/boot/dts/sigmastar/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MSTARV7) += \
+	mstar-infinity-msc313-breadbee_crust.dtb \
+	mstar-infinity2m-ssd202d-100ask-dongshanpione.dtb \
+	mstar-infinity2m-ssd202d-miyoo-mini.dtb \
+	mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dtb \
+	mstar-infinity2m-ssd202d-ssd201htv2.dtb \
+	mstar-infinity2m-ssd202d-unitv2.dtb \
+	mstar-infinity3-msc313e-breadbee.dtb \
+	mstar-mercury5-ssc8336n-midrived08.dtb
diff --git a/arch/arm/boot/dts/mstar-infinity-breadbee-common.dtsi b/arch/arm/boot/dts/sigmastar/mstar-infinity-breadbee-common.dtsi
index 507ff2fba837..507ff2fba837 100644
--- a/arch/arm/boot/dts/mstar-infinity-breadbee-common.dtsi
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity-breadbee-common.dtsi
diff --git a/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts b/arch/arm/boot/dts/sigmastar/mstar-infinity-msc313-breadbee_crust.dts
index db4910dcb8a7..db4910dcb8a7 100644
--- a/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity-msc313-breadbee_crust.dts
diff --git a/arch/arm/boot/dts/mstar-infinity-msc313.dtsi b/arch/arm/boot/dts/sigmastar/mstar-infinity-msc313.dtsi
index 3499fde263be..3499fde263be 100644
--- a/arch/arm/boot/dts/mstar-infinity-msc313.dtsi
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity-msc313.dtsi
diff --git a/arch/arm/boot/dts/mstar-infinity.dtsi b/arch/arm/boot/dts/sigmastar/mstar-infinity.dtsi
index 441a917b88ba..441a917b88ba 100644
--- a/arch/arm/boot/dts/mstar-infinity.dtsi
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity.dtsi
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd201-som2d01.dtsi
index 34df472fed71..34df472fed71 100644
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd201-som2d01.dtsi
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts
index f25a04c98ccb..f25a04c98ccb 100644
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-miyoo-mini.dts b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd202d-miyoo-mini.dts
index 1bbbf47132dc..1bbbf47132dc 100644
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-miyoo-mini.dts
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd202d-miyoo-mini.dts
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-ssd201htv2.dts b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd202d-ssd201htv2.dts
index 5d81641414a2..5d81641414a2 100644
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-ssd201htv2.dts
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd202d-ssd201htv2.dts
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-unitv2.dts b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd202d-unitv2.dts
index a81684002e45..a81684002e45 100644
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-unitv2.dts
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd202d-unitv2.dts
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
index b15c40762bc0..b15c40762bc0 100644
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
index d877aff85033..d877aff85033 100644
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d.dtsi b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd202d.dtsi
index 176e10a29896..176e10a29896 100644
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd202d.dtsi
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd202d.dtsi
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd20xd.dtsi
index 6f067da61ba3..6f067da61ba3 100644
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity2m-ssd20xd.dtsi
diff --git a/arch/arm/boot/dts/mstar-infinity2m.dtsi b/arch/arm/boot/dts/sigmastar/mstar-infinity2m.dtsi
index 1b485efd7156..1b485efd7156 100644
--- a/arch/arm/boot/dts/mstar-infinity2m.dtsi
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity2m.dtsi
diff --git a/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts b/arch/arm/boot/dts/sigmastar/mstar-infinity3-msc313e-breadbee.dts
index e64ca4ce1830..e64ca4ce1830 100644
--- a/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity3-msc313e-breadbee.dts
diff --git a/arch/arm/boot/dts/mstar-infinity3-msc313e.dtsi b/arch/arm/boot/dts/sigmastar/mstar-infinity3-msc313e.dtsi
index f581b6f89555..f581b6f89555 100644
--- a/arch/arm/boot/dts/mstar-infinity3-msc313e.dtsi
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity3-msc313e.dtsi
diff --git a/arch/arm/boot/dts/mstar-infinity3.dtsi b/arch/arm/boot/dts/sigmastar/mstar-infinity3.dtsi
index a56cf29e5d82..a56cf29e5d82 100644
--- a/arch/arm/boot/dts/mstar-infinity3.dtsi
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity3.dtsi
diff --git a/arch/arm/boot/dts/mstar-mercury5-ssc8336n-midrived08.dts b/arch/arm/boot/dts/sigmastar/mstar-mercury5-ssc8336n-midrived08.dts
index 7306b737d9c4..7306b737d9c4 100644
--- a/arch/arm/boot/dts/mstar-mercury5-ssc8336n-midrived08.dts
+++ b/arch/arm/boot/dts/sigmastar/mstar-mercury5-ssc8336n-midrived08.dts
diff --git a/arch/arm/boot/dts/mstar-mercury5-ssc8336n.dtsi b/arch/arm/boot/dts/sigmastar/mstar-mercury5-ssc8336n.dtsi
index 3f5a4c029744..3f5a4c029744 100644
--- a/arch/arm/boot/dts/mstar-mercury5-ssc8336n.dtsi
+++ b/arch/arm/boot/dts/sigmastar/mstar-mercury5-ssc8336n.dtsi
diff --git a/arch/arm/boot/dts/mstar-mercury5.dtsi b/arch/arm/boot/dts/sigmastar/mstar-mercury5.dtsi
index a7d0dd9d6132..a7d0dd9d6132 100644
--- a/arch/arm/boot/dts/mstar-mercury5.dtsi
+++ b/arch/arm/boot/dts/sigmastar/mstar-mercury5.dtsi
diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/sigmastar/mstar-v7.dtsi
index c26ba9b7b6dd..3eeafd8c7121 100644
--- a/arch/arm/boot/dts/mstar-v7.dtsi
+++ b/arch/arm/boot/dts/sigmastar/mstar-v7.dtsi
@@ -174,7 +174,7 @@
 				status = "disabled";
 			};
 
-			pm_uart: uart@221000 {
+			pm_uart: serial@221000 {
 				compatible = "ns16550a";
 				reg = <0x221000 0x100>;
 				reg-shift = <3>;
diff --git a/arch/arm/boot/dts/socionext/Makefile b/arch/arm/boot/dts/socionext/Makefile
new file mode 100644
index 000000000000..dab4275f6bd6
--- /dev/null
+++ b/arch/arm/boot/dts/socionext/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER) += \
+	uniphier-ld4-ref.dtb \
+	uniphier-ld6b-ref.dtb \
+	uniphier-pro4-ace.dtb \
+	uniphier-pro4-ref.dtb \
+	uniphier-pro4-sanji.dtb \
+	uniphier-pro5-epcore.dtb \
+	uniphier-pro5-proex.dtb \
+	uniphier-pxs2-gentil.dtb \
+	uniphier-pxs2-vodka.dtb \
+	uniphier-sld8-ref.dtb
diff --git a/arch/arm/boot/dts/milbeaut-m10v-evb.dts b/arch/arm/boot/dts/socionext/milbeaut-m10v-evb.dts
index 614f60c6b0a2..614f60c6b0a2 100644
--- a/arch/arm/boot/dts/milbeaut-m10v-evb.dts
+++ b/arch/arm/boot/dts/socionext/milbeaut-m10v-evb.dts
diff --git a/arch/arm/boot/dts/milbeaut-m10v.dtsi b/arch/arm/boot/dts/socionext/milbeaut-m10v.dtsi
index 75f0c0af2270..75f0c0af2270 100644
--- a/arch/arm/boot/dts/milbeaut-m10v.dtsi
+++ b/arch/arm/boot/dts/socionext/milbeaut-m10v.dtsi
diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/socionext/uniphier-ld4-ref.dts
index c46c2e8a10a7..e007db084787 100644
--- a/arch/arm/boot/dts/uniphier-ld4-ref.dts
+++ b/arch/arm/boot/dts/socionext/uniphier-ld4-ref.dts
@@ -36,11 +36,11 @@
 };
 
 &ethsc {
-	interrupts = <1 8>;
+	interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serialsc {
-	interrupts = <1 8>;
+	interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serial0 {
@@ -56,7 +56,7 @@
 };
 
 &gpio {
-	xirq1 {
+	xirq1-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(1) 0>;
 		input;
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/socionext/uniphier-ld4.dtsi
index b52957ccda0d..df2de7a40211 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/socionext/uniphier-ld4.dtsi
@@ -6,6 +6,7 @@
 //   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
 
 #include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "socionext,uniphier-ld4";
@@ -55,7 +56,8 @@
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
 			      <0x506c0000 0x400>;
-			interrupts = <0 174 4>, <0 175 4>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-size = <(512 * 1024)>;
 			cache-sets = <256>;
@@ -69,7 +71,7 @@
 			reg = <0x54006000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 39 4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
 			clocks = <&peri_clk 11>;
@@ -80,7 +82,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006800 0x40>;
-			interrupts = <0 33 4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
 			clocks = <&peri_clk 0>;
@@ -91,7 +93,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006900 0x40>;
-			interrupts = <0 35 4>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
 			clocks = <&peri_clk 1>;
@@ -102,7 +104,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006a00 0x40>;
-			interrupts = <0 37 4>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
 			clocks = <&peri_clk 2>;
@@ -113,7 +115,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006b00 0x40>;
-			interrupts = <0 29 4>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
 			clocks = <&peri_clk 3>;
@@ -140,7 +142,7 @@
 			reg = <0x58400000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 41 1>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
 			clocks = <&peri_clk 4>;
@@ -154,7 +156,7 @@
 			reg = <0x58480000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 42 1>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
 			clocks = <&peri_clk 5>;
@@ -168,7 +170,7 @@
 			reg = <0x58500000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 43 1>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2>;
 			clocks = <&peri_clk 6>;
@@ -182,7 +184,7 @@
 			reg = <0x58580000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 44 1>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
 			clocks = <&peri_clk 7>;
@@ -205,33 +207,33 @@
 			reg = <0x59801000 0x400>;
 		};
 
-		mioctrl@59810000 {
+		syscon@59810000 {
 			compatible = "socionext,uniphier-ld4-mioctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59810000 0x800>;
 
-			mio_clk: clock {
+			mio_clk: clock-controller {
 				compatible = "socionext,uniphier-ld4-mio-clock";
 				#clock-cells = <1>;
 			};
 
-			mio_rst: reset {
+			mio_rst: reset-controller {
 				compatible = "socionext,uniphier-ld4-mio-reset";
 				#reset-cells = <1>;
 			};
 		};
 
-		perictrl@59820000 {
+		syscon@59820000 {
 			compatible = "socionext,uniphier-ld4-perictrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59820000 0x200>;
 
-			peri_clk: clock {
+			peri_clk: clock-controller {
 				compatible = "socionext,uniphier-ld4-peri-clock";
 				#clock-cells = <1>;
 			};
 
-			peri_rst: reset {
+			peri_rst: reset-controller {
 				compatible = "socionext,uniphier-ld4-peri-reset";
 				#reset-cells = <1>;
 			};
@@ -240,8 +242,13 @@
 		dmac: dma-controller@5a000000 {
 			compatible = "socionext,uniphier-mio-dmac";
 			reg = <0x5a000000 0x1000>;
-			interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
-				     <0 71 4>, <0 72 4>, <0 73 4>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&mio_clk 7>;
 			resets = <&mio_rst 7>;
 			#dma-cells = <1>;
@@ -251,7 +258,7 @@
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a400000 0x200>;
-			interrupts = <0 76 4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default", "uhs";
 			pinctrl-0 = <&pinctrl_sd>;
 			pinctrl-1 = <&pinctrl_sd_uhs>;
@@ -271,7 +278,7 @@
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a500000 0x200>;
-			interrupts = <0 78 4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&mio_clk 1>;
@@ -289,7 +296,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a800100 0x100>;
-			interrupts = <0 80 4>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
@@ -303,7 +310,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a810100 0x100>;
-			interrupts = <0 81 4>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
@@ -317,7 +324,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a820100 0x100>;
-			interrupts = <0 82 4>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb2>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
@@ -327,7 +334,7 @@
 			has-transaction-translator;
 		};
 
-		soc-glue@5f800000 {
+		syscon@5f800000 {
 			compatible = "socionext,uniphier-ld4-soc-glue",
 				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
@@ -337,9 +344,10 @@
 			};
 		};
 
-		soc-glue@5f900000 {
+		syscon@5f900000 {
 			compatible = "socionext,uniphier-ld4-soc-glue-debug",
-				     "simple-mfd";
+				     "simple-mfd", "syscon";
+			reg = <0x5f900000 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x5f900000 0x2000>;
@@ -358,14 +366,16 @@
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x104>;
+			interrupts = <GIC_PPI 11
+				(GIC_CPU_MASK_RAW(1) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
 		timer@60000600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x104>;
+			interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_RAW(1) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
@@ -384,17 +394,17 @@
 			#interrupt-cells = <2>;
 		};
 
-		sysctrl@61840000 {
+		syscon@61840000 {
 			compatible = "socionext,uniphier-ld4-sysctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x61840000 0x10000>;
 
-			sys_clk: clock {
+			sys_clk: clock-controller {
 				compatible = "socionext,uniphier-ld4-clock";
 				#clock-cells = <1>;
 			};
 
-			sys_rst: reset {
+			sys_rst: reset-controller {
 				compatible = "socionext,uniphier-ld4-reset";
 				#reset-cells = <1>;
 			};
@@ -407,7 +417,7 @@
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 65 4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/socionext/uniphier-ld6b-ref.dts
index 5bc7fe11b517..223a78b4a761 100644
--- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts
+++ b/arch/arm/boot/dts/socionext/uniphier-ld6b-ref.dts
@@ -40,11 +40,11 @@
 };
 
 &ethsc {
-	interrupts = <4 8>;
+	interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serialsc {
-	interrupts = <4 8>;
+	interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serial0 {
@@ -60,7 +60,7 @@
 };
 
 &gpio {
-	xirq4 {
+	xirq4-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(4) 0>;
 		input;
diff --git a/arch/arm/boot/dts/uniphier-ld6b.dtsi b/arch/arm/boot/dts/socionext/uniphier-ld6b.dtsi
index 4d07a94c6b34..4d07a94c6b34 100644
--- a/arch/arm/boot/dts/uniphier-ld6b.dtsi
+++ b/arch/arm/boot/dts/socionext/uniphier-ld6b.dtsi
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/socionext/uniphier-pinctrl.dtsi
index c0fd029b37e5..f909ec2e5333 100644
--- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi
+++ b/arch/arm/boot/dts/socionext/uniphier-pinctrl.dtsi
@@ -196,11 +196,21 @@
 		function = "usb0";
 	};
 
+	pinctrl_usb0_device: usb0-device {
+		groups = "usb0_device";
+		function = "usb0";
+	};
+
 	pinctrl_usb1: usb1 {
 		groups = "usb1";
 		function = "usb1";
 	};
 
+	pinctrl_usb1_device: usb1-device {
+		groups = "usb1_device";
+		function = "usb1";
+	};
+
 	pinctrl_usb2: usb2 {
 		groups = "usb2";
 		function = "usb2";
diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/socionext/uniphier-pro4-ace.dts
index 27ff2b7b9d0e..6baee4410d9c 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ace.dts
+++ b/arch/arm/boot/dts/socionext/uniphier-pro4-ace.dts
@@ -99,3 +99,11 @@
 &usb1 {
 	status = "okay";
 };
+
+&ahci0 {
+	status = "okay";
+};
+
+&ahci1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/socionext/uniphier-pro4-ref.dts
index 3b9b61314d01..d2ce5c039865 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ref.dts
+++ b/arch/arm/boot/dts/socionext/uniphier-pro4-ref.dts
@@ -39,11 +39,11 @@
 };
 
 &ethsc {
-	interrupts = <2 8>;
+	interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serialsc {
-	interrupts = <2 8>;
+	interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serial0 {
@@ -59,7 +59,7 @@
 };
 
 &gpio {
-	xirq2 {
+	xirq2-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(2) 0>;
 		input;
@@ -108,3 +108,11 @@
 		reg = <0>;
 	};
 };
+
+&ahci0 {
+	status = "okay";
+};
+
+&ahci1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pro4-sanji.dts b/arch/arm/boot/dts/socionext/uniphier-pro4-sanji.dts
index 7b6faf2e795e..7b6faf2e795e 100644
--- a/arch/arm/boot/dts/uniphier-pro4-sanji.dts
+++ b/arch/arm/boot/dts/socionext/uniphier-pro4-sanji.dts
diff --git a/arch/arm/boot/dts/socionext/uniphier-pro4.dtsi b/arch/arm/boot/dts/socionext/uniphier-pro4.dtsi
new file mode 100644
index 000000000000..ba55af30e904
--- /dev/null
+++ b/arch/arm/boot/dts/socionext/uniphier-pro4.dtsi
@@ -0,0 +1,734 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier Pro4 SoC
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "socionext,uniphier-pro4";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		arm_timer_clk: arm-timer {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		l2: cache-controller@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-size = <(768 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>;
+			gpio-ranges-group-names = "gpio_range";
+			ngpios = <248>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		/* i2c4 does not exist */
+
+		/* chip-internal connection for DMD */
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&peri_clk 9>;
+			resets = <&peri_rst 9>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&peri_clk 10>;
+			resets = <&peri_rst 10>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		mioctrl: syscon@59810000 {
+			compatible = "socionext,uniphier-pro4-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock-controller {
+				compatible = "socionext,uniphier-pro4-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset-controller {
+				compatible = "socionext,uniphier-pro4-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		syscon@59820000 {
+			compatible = "socionext,uniphier-pro4-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock-controller {
+				compatible = "socionext,uniphier-pro4-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset-controller {
+				compatible = "socionext,uniphier-pro4-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		dmac: dma-controller@5a000000 {
+			compatible = "socionext,uniphier-mio-dmac";
+			reg = <0x5a000000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mio_clk 7>;
+			resets = <&mio_rst 7>;
+			#dma-cells = <1>;
+		};
+
+		sd: mmc@5a400000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a400000 0x200>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&mio_clk 0>;
+			reset-names = "host", "bridge";
+			resets = <&mio_rst 0>, <&mio_rst 3>;
+			dma-names = "rx-tx";
+			dmas = <&dmac 4>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			socionext,syscon-uhs-mode = <&mioctrl 0>;
+		};
+
+		emmc: mmc@5a500000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a500000 0x200>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&mio_clk 1>;
+			reset-names = "host", "bridge", "hw";
+			resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+			dma-names = "rx-tx";
+			dmas = <&dmac 5>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+			non-removable;
+		};
+
+		sd1: mmc@5a600000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a600000 0x200>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sd1>;
+			clocks = <&mio_clk 2>;
+			reset-names = "host", "bridge";
+			resets = <&mio_rst 2>, <&mio_rst 5>;
+			dma-names = "rx-tx";
+			dmas = <&dmac 6>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+		};
+
+		usb2: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+				 <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+			phy-names = "usb";
+			phys = <&usb_phy0>;
+			has-transaction-translator;
+		};
+
+		usb3: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb3>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+				 <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+			phy-names = "usb";
+			phys = <&usb_phy1>;
+			has-transaction-translator;
+		};
+
+		soc_glue: syscon@5f800000 {
+			compatible = "socionext,uniphier-pro4-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-pro4-pinctrl";
+			};
+
+			usb-hub {
+				compatible = "socionext,uniphier-pro4-usb2-phy";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb_phy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <0>;
+					vbus-supply = <&usb0_vbus>;
+				};
+
+				usb_phy3: phy@3 {
+					reg = <3>;
+					#phy-cells = <0>;
+					vbus-supply = <&usb1_vbus>;
+				};
+			};
+
+			sg_clk: clock-controller {
+				compatible = "socionext,uniphier-pro4-sg-clock";
+				#clock-cells = <1>;
+			};
+		};
+
+		syscon@5f900000 {
+			compatible = "socionext,uniphier-pro4-soc-glue-debug",
+				     "simple-mfd", "syscon";
+			reg = <0x5f900000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@130 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x130 0x8>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x14>;
+			};
+		};
+
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
+		aidet: interrupt-controller@5fc20000 {
+			compatible = "socionext,uniphier-pro4-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <GIC_PPI 11
+				(GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		syscon@61840000 {
+			compatible = "socionext,uniphier-pro4-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock-controller {
+				compatible = "socionext,uniphier-pro4-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset-controller {
+				compatible = "socionext,uniphier-pro4-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		eth: ethernet@65000000 {
+			compatible = "socionext,uniphier-pro4-ave4";
+			status = "disabled";
+			reg = <0x65000000 0x8500>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ether_rgmii>;
+			clock-names = "gio", "ether", "ether-gb", "ether-phy";
+			clocks = <&sys_clk 12>, <&sys_clk 6>, <&sys_clk 7>,
+				 <&sys_clk 10>;
+			reset-names = "gio", "ether";
+			resets = <&sys_rst 12>, <&sys_rst 6>;
+			phy-mode = "rgmii";
+			local-mac-address = [00 00 00 00 00 00];
+			socionext,syscon-phy-mode = <&soc_glue 0>;
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		ahci0: sata@65600000 {
+			compatible = "socionext,uniphier-pro4-ahci",
+				     "generic-ahci";
+			status = "disabled";
+			reg = <0x65600000 0x10000>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_clk 12>, <&sys_clk 28>;
+			resets = <&sys_rst 12>, <&sys_rst 28>, <&ahci0_rst 3>;
+			ports-implemented = <1>;
+			phys = <&ahci0_phy>;
+			assigned-clocks = <&sg_clk 0>;
+			assigned-clock-rates = <25000000>;
+		};
+
+		sata-controller@65700000 {
+			compatible = "socionext,uniphier-pxs2-ahci-glue",
+				     "simple-mfd";
+			reg = <0x65700000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65700000 0x100>;
+
+			ahci0_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pro4-ahci-reset";
+				reg = <0x0 0x4>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 28>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 28>;
+				#reset-cells = <1>;
+			};
+
+			ahci0_phy: phy@10 {
+				compatible = "socionext,uniphier-pro4-ahci-phy";
+				reg = <0x10 0x40>;
+				clock-names = "link", "gio";
+				clocks = <&sys_clk 28>, <&sys_clk 12>;
+				reset-names = "link", "gio", "phy",
+					      "pm", "tx", "rx";
+				resets = <&sys_rst 28>, <&sys_rst 12>,
+					 <&sys_rst 30>,
+					 <&ahci0_rst 0>, <&ahci0_rst 1>,
+					 <&ahci0_rst 2>;
+				#phy-cells = <0>;
+			};
+		};
+
+		ahci1: sata@65800000 {
+			compatible = "socionext,uniphier-pro4-ahci",
+				     "generic-ahci";
+			status = "disabled";
+			reg = <0x65800000 0x10000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_clk 12>, <&sys_clk 29>;
+			resets = <&sys_rst 12>, <&sys_rst 29>, <&ahci1_rst 3>;
+			ports-implemented = <1>;
+			phys = <&ahci1_phy>;
+			assigned-clocks = <&sg_clk 0>;
+			assigned-clock-rates = <25000000>;
+		};
+
+		sata-controller@65900000 {
+			compatible = "socionext,uniphier-pro4-ahci-glue",
+				     "simple-mfd";
+			reg = <0x65900000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65900000 0x100>;
+
+			ahci1_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pro4-ahci-reset";
+				reg = <0x0 0x4>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 29>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 29>;
+				#reset-cells = <1>;
+			};
+
+			ahci1_phy: phy@10 {
+				compatible = "socionext,uniphier-pro4-ahci-phy";
+				reg = <0x10 0x40>;
+				clock-names = "link", "gio";
+				clocks = <&sys_clk 29>, <&sys_clk 12>;
+				reset-names = "link", "gio", "phy",
+					      "pm", "tx", "rx";
+				resets = <&sys_rst 29>, <&sys_rst 12>,
+					 <&sys_rst 30>,
+					 <&ahci1_rst 0>, <&ahci1_rst 1>,
+					 <&ahci1_rst 2>;
+				#phy-cells = <0>;
+			};
+		};
+
+		usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb0_rst 4>;
+			phys = <&usb_phy2>, <&usb0_ssphy>;
+			dr_mode = "host";
+		};
+
+		usb-controller@65b00000 {
+			compatible = "socionext,uniphier-pro4-dwc3-glue",
+				     "simple-mfd";
+			reg = <0x65b00000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x100>;
+
+			usb0_vbus: regulator@0 {
+				compatible = "socionext,uniphier-pro4-usb3-regulator";
+				reg = <0 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+
+			usb0_ssphy: phy@10 {
+				compatible = "socionext,uniphier-pro4-usb3-ssphy";
+				reg = <0x10 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+				vbus-supply = <&usb0_vbus>;
+			};
+
+			usb0_rst: reset-controller@40 {
+				compatible = "socionext,uniphier-pro4-usb3-reset";
+				reg = <0x40 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+		};
+
+		usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb1_rst 4>;
+			phys = <&usb_phy3>;
+			dr_mode = "host";
+		};
+
+		usb-controller@65d00000 {
+			compatible = "socionext,uniphier-pro4-dwc3-glue",
+				     "simple-mfd";
+			reg = <0x65d00000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x100>;
+
+			usb1_vbus: regulator@0 {
+				compatible = "socionext,uniphier-pro4-usb3-regulator";
+				reg = <0 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+
+			usb1_rst: reset-controller@40 {
+				compatible = "socionext,uniphier-pro4-usb3-reset";
+				reg = <0x40 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5a";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/socionext/uniphier-pro5-epcore.dts b/arch/arm/boot/dts/socionext/uniphier-pro5-epcore.dts
new file mode 100644
index 000000000000..ed759dcc3216
--- /dev/null
+++ b/arch/arm/boot/dts/socionext/uniphier-pro5-epcore.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Source for UniPhier Pro5 EP-CORE Board (Pro5-PCIe_EP-CORE)
+ *
+ * Copyright (C) 2021 Socionext Inc.
+ *   Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+ */
+
+/dts-v1/;
+#include "uniphier-pro5.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier Pro5 EP-CORE Board";
+	compatible = "socionext,uniphier-pro5-epcore", "socionext,uniphier-pro5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&serialsc {
+	interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&sd {
+	status = "okay";
+};
+
+&pcie_ep {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socionext/uniphier-pro5-proex.dts b/arch/arm/boot/dts/socionext/uniphier-pro5-proex.dts
new file mode 100644
index 000000000000..2cfb84f73cc0
--- /dev/null
+++ b/arch/arm/boot/dts/socionext/uniphier-pro5-proex.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Source for UniPhier Pro5 ProEX Board
+ *
+ * Copyright (C) 2021 Socionext Inc.
+ *   Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+ */
+
+/dts-v1/;
+#include "uniphier-pro5.dtsi"
+
+/ {
+	model = "UniPhier Pro5 ProEX Board";
+	compatible = "socionext,uniphier-pro5-proex", "socionext,uniphier-pro5";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&pcie_ep {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/socionext/uniphier-pro5.dtsi
index 3525125832dd..2d8591cdddb8 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/socionext/uniphier-pro5.dtsi
@@ -5,6 +5,8 @@
 // Copyright (C) 2015-2016 Socionext Inc.
 //   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
 
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
 / {
 	compatible = "socionext,uniphier-pro5";
 	#address-cells = <1>;
@@ -135,7 +137,8 @@
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
 			      <0x506c0000 0x400>;
-			interrupts = <0 190 4>, <0 191 4>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-size = <(2 * 1024 * 1024)>;
 			cache-sets = <512>;
@@ -148,7 +151,8 @@
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
 			      <0x506c8000 0x400>;
-			interrupts = <0 174 4>, <0 175 4>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-size = <(2 * 1024 * 1024)>;
 			cache-sets = <512>;
@@ -162,7 +166,7 @@
 			reg = <0x54006000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 39 4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
 			clocks = <&peri_clk 11>;
@@ -175,7 +179,7 @@
 			reg = <0x54006100 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 216 4>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
 			clocks = <&peri_clk 11>;	/* common with spi0 */
@@ -186,7 +190,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006800 0x40>;
-			interrupts = <0 33 4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
 			clocks = <&peri_clk 0>;
@@ -197,7 +201,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006900 0x40>;
-			interrupts = <0 35 4>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
 			clocks = <&peri_clk 1>;
@@ -208,7 +212,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006a00 0x40>;
-			interrupts = <0 37 4>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
 			clocks = <&peri_clk 2>;
@@ -219,7 +223,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006b00 0x40>;
-			interrupts = <0 177 4>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
 			clocks = <&peri_clk 3>;
@@ -246,7 +250,7 @@
 			reg = <0x58780000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 41 4>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
 			clocks = <&peri_clk 4>;
@@ -260,7 +264,7 @@
 			reg = <0x58781000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 42 4>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
 			clocks = <&peri_clk 5>;
@@ -274,7 +278,7 @@
 			reg = <0x58782000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 43 4>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2>;
 			clocks = <&peri_clk 6>;
@@ -288,7 +292,7 @@
 			reg = <0x58783000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 44 4>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
 			clocks = <&peri_clk 7>;
@@ -304,7 +308,7 @@
 			reg = <0x58785000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 25 4>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 9>;
 			resets = <&peri_rst 9>;
 			clock-frequency = <400000>;
@@ -316,7 +320,7 @@
 			reg = <0x58786000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 26 4>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 10>;
 			resets = <&peri_rst 10>;
 			clock-frequency = <400000>;
@@ -337,39 +341,39 @@
 			reg = <0x59801000 0x400>;
 		};
 
-		sdctrl@59810000 {
+		sdctrl: syscon@59810000 {
 			compatible = "socionext,uniphier-pro5-sdctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59810000 0x400>;
 
-			sd_clk: clock {
+			sd_clk: clock-controller {
 				compatible = "socionext,uniphier-pro5-sd-clock";
 				#clock-cells = <1>;
 			};
 
-			sd_rst: reset {
+			sd_rst: reset-controller {
 				compatible = "socionext,uniphier-pro5-sd-reset";
 				#reset-cells = <1>;
 			};
 		};
 
-		perictrl@59820000 {
+		syscon@59820000 {
 			compatible = "socionext,uniphier-pro5-perictrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59820000 0x200>;
 
-			peri_clk: clock {
+			peri_clk: clock-controller {
 				compatible = "socionext,uniphier-pro5-peri-clock";
 				#clock-cells = <1>;
 			};
 
-			peri_rst: reset {
+			peri_rst: reset-controller {
 				compatible = "socionext,uniphier-pro5-peri-reset";
 				#reset-cells = <1>;
 			};
 		};
 
-		soc-glue@5f800000 {
+		syscon@5f800000 {
 			compatible = "socionext,uniphier-pro5-soc-glue",
 				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
@@ -379,9 +383,10 @@
 			};
 		};
 
-		soc-glue@5f900000 {
+		syscon@5f900000 {
 			compatible = "socionext,uniphier-pro5-soc-glue-debug",
-				     "simple-mfd";
+				     "simple-mfd", "syscon";
+			reg = <0x5f900000 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x5f900000 0x2000>;
@@ -415,7 +420,7 @@
 		xdmac: dma-controller@5fc10000 {
 			compatible = "socionext,uniphier-xdmac";
 			reg = <0x5fc10000 0x5300>;
-			interrupts = <0 188 4>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 			dma-channels = <16>;
 			#dma-cells = <2>;
 		};
@@ -430,14 +435,16 @@
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x304>;
+			interrupts = <GIC_PPI 11
+				(GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
 		timer@60000600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x304>;
+			interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
@@ -449,17 +456,17 @@
 			interrupt-controller;
 		};
 
-		sysctrl@61840000 {
+		syscon@61840000 {
 			compatible = "socionext,uniphier-pro5-sysctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x61840000 0x10000>;
 
-			sys_clk: clock {
+			sys_clk: clock-controller {
 				compatible = "socionext,uniphier-pro5-clock";
 				#clock-cells = <1>;
 			};
 
-			sys_rst: reset {
+			sys_rst: reset-controller {
 				compatible = "socionext,uniphier-pro5-reset";
 				#reset-cells = <1>;
 			};
@@ -470,7 +477,7 @@
 			status = "disabled";
 			reg = <0x65a00000 0xcd00>;
 			interrupt-names = "host";
-			interrupts = <0 134 4>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -480,14 +487,15 @@
 			dr_mode = "host";
 		};
 
-		usb-glue@65b00000 {
+		usb-controller@65b00000 {
 			compatible = "socionext,uniphier-pro5-dwc3-glue",
 				     "simple-mfd";
+			reg = <0x65b00000 0x400>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x65b00000 0x400>;
 
-			usb0_rst: reset@0 {
+			usb0_rst: reset-controller@0 {
 				compatible = "socionext,uniphier-pro5-usb3-reset";
 				reg = <0x0 0x4>;
 				#reset-cells = <1>;
@@ -506,7 +514,7 @@
 				resets = <&sys_rst 12>, <&sys_rst 14>;
 			};
 
-			usb0_hsphy0: hs-phy@280 {
+			usb0_hsphy0: phy@280 {
 				compatible = "socionext,uniphier-pro5-usb3-hsphy";
 				reg = <0x280 0x10>;
 				#phy-cells = <0>;
@@ -517,7 +525,7 @@
 				vbus-supply = <&usb0_vbus0>;
 			};
 
-			usb0_ssphy0: ss-phy@380 {
+			usb0_ssphy0: phy@380 {
 				compatible = "socionext,uniphier-pro5-usb3-ssphy";
 				reg = <0x380 0x10>;
 				#phy-cells = <0>;
@@ -534,7 +542,7 @@
 			status = "disabled";
 			reg = <0x65c00000 0xcd00>;
 			interrupt-names = "host";
-			interrupts = <0 137 4>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb2>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -544,14 +552,15 @@
 			dr_mode = "host";
 		};
 
-		usb-glue@65d00000 {
+		usb-controller@65d00000 {
 			compatible = "socionext,uniphier-pro5-dwc3-glue",
 				     "simple-mfd";
+			reg = <0x65d00000 0x400>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x65d00000 0x400>;
 
-			usb1_rst: reset@0 {
+			usb1_rst: reset-controller@0 {
 				compatible = "socionext,uniphier-pro5-usb3-reset";
 				reg = <0x0 0x4>;
 				#reset-cells = <1>;
@@ -579,7 +588,7 @@
 				resets = <&sys_rst 12>, <&sys_rst 15>;
 			};
 
-			usb1_hsphy0: hs-phy@280 {
+			usb1_hsphy0: phy@280 {
 				compatible = "socionext,uniphier-pro5-usb3-hsphy";
 				reg = <0x280 0x10>;
 				#phy-cells = <0>;
@@ -590,7 +599,7 @@
 				vbus-supply = <&usb1_vbus0>;
 			};
 
-			usb1_hsphy1: hs-phy@290 {
+			usb1_hsphy1: phy@290 {
 				compatible = "socionext,uniphier-pro5-usb3-hsphy";
 				reg = <0x290 0x10>;
 				#phy-cells = <0>;
@@ -601,7 +610,7 @@
 				vbus-supply = <&usb1_vbus1>;
 			};
 
-			usb1_ssphy0: ss-phy@380 {
+			usb1_ssphy0: phy@380 {
 				compatible = "socionext,uniphier-pro5-usb3-ssphy";
 				reg = <0x380 0x10>;
 				#phy-cells = <0>;
@@ -614,8 +623,7 @@
 		};
 
 		pcie_ep: pcie-ep@66000000 {
-			compatible = "socionext,uniphier-pro5-pcie-ep",
-				     "snps,dw-pcie-ep";
+			compatible = "socionext,uniphier-pro5-pcie-ep";
 			status = "disabled";
 			reg-names = "dbi", "dbi2", "link", "addr_space";
 			reg = <0x66000000 0x1000>, <0x66001000 0x1000>,
@@ -650,7 +658,7 @@
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 65 4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
@@ -663,7 +671,7 @@
 			compatible = "socionext,uniphier-sd-v3.1";
 			status = "disabled";
 			reg = <0x68400000 0x800>;
-			interrupts = <0 78 4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&sd_clk 1>;
@@ -679,7 +687,7 @@
 			compatible = "socionext,uniphier-sd-v3.1";
 			status = "disabled";
 			reg = <0x68800000 0x800>;
-			interrupts = <0 76 4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default", "uhs";
 			pinctrl-0 = <&pinctrl_sd>;
 			pinctrl-1 = <&pinctrl_sd_uhs>;
@@ -691,6 +699,7 @@
 			sd-uhs-sdr12;
 			sd-uhs-sdr25;
 			sd-uhs-sdr50;
+			socionext,syscon-uhs-mode = <&sdctrl 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/socionext/uniphier-pxs2-gentil.dts
index 759384b60663..5f18b926c50a 100644
--- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
+++ b/arch/arm/boot/dts/socionext/uniphier-pxs2-gentil.dts
@@ -99,3 +99,7 @@
 &usb1 {
 	status = "okay";
 };
+
+&ahci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/socionext/uniphier-pxs2-vodka.dts
index 7e08a459f7d8..ab910e1b5e6a 100644
--- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
+++ b/arch/arm/boot/dts/socionext/uniphier-pxs2-vodka.dts
@@ -43,7 +43,7 @@
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 
-		port@0 {
+		port {
 			spdif_tx: endpoint {
 				remote-endpoint = <&spdif_hiecout1>;
 			};
@@ -54,7 +54,7 @@
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 
-		port@0 {
+		port {
 			comp_spdif_tx: endpoint {
 				remote-endpoint = <&comp_spdif_hiecout1>;
 			};
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/socionext/uniphier-pxs2.dtsi
index 03301ddb3403..f97a57222101 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/socionext/uniphier-pxs2.dtsi
@@ -6,6 +6,7 @@
 //   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
 
 #include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -161,7 +162,10 @@
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
 			      <0x506c0000 0x400>;
-			interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-size = <(1280 * 1024)>;
 			cache-sets = <512>;
@@ -175,7 +179,7 @@
 			reg = <0x54006000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 39 4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
 			clocks = <&peri_clk 11>;
@@ -188,7 +192,7 @@
 			reg = <0x54006100 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 216 4>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
 			clocks = <&peri_clk 12>;
@@ -199,7 +203,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006800 0x40>;
-			interrupts = <0 33 4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
 			clocks = <&peri_clk 0>;
@@ -210,7 +214,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006900 0x40>;
-			interrupts = <0 35 4>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
 			clocks = <&peri_clk 1>;
@@ -221,7 +225,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006a00 0x40>;
-			interrupts = <0 37 4>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
 			clocks = <&peri_clk 2>;
@@ -232,7 +236,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006b00 0x40>;
-			interrupts = <0 177 4>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
 			clocks = <&peri_clk 3>;
@@ -259,7 +263,7 @@
 		audio@56000000 {
 			compatible = "socionext,uniphier-pxs2-aio";
 			reg = <0x56000000 0x80000>;
-			interrupts = <0 144 4>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_ain1>,
 				    <&pinctrl_ain2>,
@@ -317,7 +321,7 @@
 			reg = <0x58780000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 41 4>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
 			clocks = <&peri_clk 4>;
@@ -331,7 +335,7 @@
 			reg = <0x58781000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 42 4>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
 			clocks = <&peri_clk 5>;
@@ -345,7 +349,7 @@
 			reg = <0x58782000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 43 4>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2>;
 			clocks = <&peri_clk 6>;
@@ -359,7 +363,7 @@
 			reg = <0x58783000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 44 4>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
 			clocks = <&peri_clk 7>;
@@ -373,7 +377,7 @@
 			reg = <0x58784000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 45 4>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 8>;
 			resets = <&peri_rst 8>;
 			clock-frequency = <400000>;
@@ -385,7 +389,7 @@
 			reg = <0x58785000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 25 4>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 9>;
 			resets = <&peri_rst 9>;
 			clock-frequency = <400000>;
@@ -397,7 +401,7 @@
 			reg = <0x58786000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 26 4>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 10>;
 			resets = <&peri_rst 10>;
 			clock-frequency = <400000>;
@@ -418,33 +422,33 @@
 			reg = <0x59801000 0x400>;
 		};
 
-		sdctrl@59810000 {
+		sdctrl: syscon@59810000 {
 			compatible = "socionext,uniphier-pxs2-sdctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59810000 0x400>;
 
-			sd_clk: clock {
+			sd_clk: clock-controller {
 				compatible = "socionext,uniphier-pxs2-sd-clock";
 				#clock-cells = <1>;
 			};
 
-			sd_rst: reset {
+			sd_rst: reset-controller {
 				compatible = "socionext,uniphier-pxs2-sd-reset";
 				#reset-cells = <1>;
 			};
 		};
 
-		perictrl@59820000 {
+		syscon@59820000 {
 			compatible = "socionext,uniphier-pxs2-perictrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59820000 0x200>;
 
-			peri_clk: clock {
+			peri_clk: clock-controller {
 				compatible = "socionext,uniphier-pxs2-peri-clock";
 				#clock-cells = <1>;
 			};
 
-			peri_rst: reset {
+			peri_rst: reset-controller {
 				compatible = "socionext,uniphier-pxs2-peri-reset";
 				#reset-cells = <1>;
 			};
@@ -454,7 +458,7 @@
 			compatible = "socionext,uniphier-sd-v3.1.1";
 			status = "disabled";
 			reg = <0x5a000000 0x800>;
-			interrupts = <0 78 4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&sd_clk 1>;
@@ -470,7 +474,7 @@
 			compatible = "socionext,uniphier-sd-v3.1.1";
 			status = "disabled";
 			reg = <0x5a400000 0x800>;
-			interrupts = <0 76 4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default", "uhs";
 			pinctrl-0 = <&pinctrl_sd>;
 			pinctrl-1 = <&pinctrl_sd_uhs>;
@@ -482,9 +486,10 @@
 			sd-uhs-sdr12;
 			sd-uhs-sdr25;
 			sd-uhs-sdr50;
+			socionext,syscon-uhs-mode = <&sdctrl 0>;
 		};
 
-		soc_glue: soc-glue@5f800000 {
+		soc_glue: syscon@5f800000 {
 			compatible = "socionext,uniphier-pxs2-soc-glue",
 				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
@@ -494,9 +499,10 @@
 			};
 		};
 
-		soc-glue@5f900000 {
+		syscon@5f900000 {
 			compatible = "socionext,uniphier-pxs2-soc-glue-debug",
-				     "simple-mfd";
+				     "simple-mfd", "syscon";
+			reg = <0x5f900000 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x5f900000 0x2000>;
@@ -515,7 +521,7 @@
 		xdmac: dma-controller@5fc10000 {
 			compatible = "socionext,uniphier-xdmac";
 			reg = <0x5fc10000 0x5300>;
-			interrupts = <0 188 4>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 			dma-channels = <16>;
 			#dma-cells = <2>;
 		};
@@ -530,14 +536,16 @@
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0xf04>;
+			interrupts = <GIC_PPI 11
+				(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
 		timer@60000600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0xf04>;
+			interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
@@ -549,24 +557,24 @@
 			interrupt-controller;
 		};
 
-		sysctrl@61840000 {
+		syscon@61840000 {
 			compatible = "socionext,uniphier-pxs2-sysctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x61840000 0x10000>;
 
-			sys_clk: clock {
+			sys_clk: clock-controller {
 				compatible = "socionext,uniphier-pxs2-clock";
 				#clock-cells = <1>;
 			};
 
-			sys_rst: reset {
+			sys_rst: reset-controller {
 				compatible = "socionext,uniphier-pxs2-reset";
 				#reset-cells = <1>;
 			};
 
-			pvtctl: pvtctl {
+			pvtctl: thermal-sensor {
 				compatible = "socionext,uniphier-pxs2-thermal";
-				interrupts = <0 3 4>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 				#thermal-sensor-cells = <0>;
 				socionext,tmod-calibration = <0x0f86 0x6844>;
 			};
@@ -576,7 +584,7 @@
 			compatible = "socionext,uniphier-pxs2-ave4";
 			status = "disabled";
 			reg = <0x65000000 0x8500>;
-			interrupts = <0 66 4>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_ether_rgmii>;
 			clock-names = "ether";
@@ -593,12 +601,53 @@
 			};
 		};
 
+		ahci: sata@65600000 {
+			compatible = "socionext,uniphier-pxs2-ahci",
+				     "generic-ahci";
+			status = "disabled";
+			reg = <0x65600000 0x10000>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_clk 28>;
+			resets = <&sys_rst 28>, <&ahci_rst 0>;
+			ports-implemented = <1>;
+			phys = <&ahci_phy>;
+		};
+
+		sata-controller@65700000 {
+			compatible = "socionext,uniphier-pxs2-ahci-glue",
+				     "simple-mfd";
+			reg = <0x65700000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65700000 0x100>;
+
+			ahci_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pxs2-ahci-reset";
+				reg = <0x0 0x4>;
+				clock-names = "link";
+				clocks = <&sys_clk 28>;
+				reset-names = "link";
+				resets = <&sys_rst 28>;
+				#reset-cells = <1>;
+			};
+
+			ahci_phy: phy@10 {
+				compatible = "socionext,uniphier-pxs2-ahci-phy";
+				reg = <0x10 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 28>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 28>, <&sys_rst 30>;
+				#phy-cells = <0>;
+			};
+		};
+
 		usb0: usb@65a00000 {
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65a00000 0xcd00>;
 			interrupt-names = "dwc_usb3";
-			interrupts = <0 134 4>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -609,14 +658,15 @@
 			dr_mode = "host";
 		};
 
-		usb-glue@65b00000 {
+		usb-controller@65b00000 {
 			compatible = "socionext,uniphier-pxs2-dwc3-glue",
 				     "simple-mfd";
+			reg = <0x65b00000 0x400>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x65b00000 0x400>;
 
-			usb0_rst: reset@0 {
+			usb0_rst: reset-controller@0 {
 				compatible = "socionext,uniphier-pxs2-usb3-reset";
 				reg = <0x0 0x4>;
 				#reset-cells = <1>;
@@ -644,7 +694,7 @@
 				resets = <&sys_rst 14>;
 			};
 
-			usb0_hsphy0: hs-phy@200 {
+			usb0_hsphy0: phy@200 {
 				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
 				reg = <0x200 0x10>;
 				#phy-cells = <0>;
@@ -655,7 +705,7 @@
 				vbus-supply = <&usb0_vbus0>;
 			};
 
-			usb0_hsphy1: hs-phy@210 {
+			usb0_hsphy1: phy@210 {
 				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
 				reg = <0x210 0x10>;
 				#phy-cells = <0>;
@@ -666,7 +716,7 @@
 				vbus-supply = <&usb0_vbus1>;
 			};
 
-			usb0_ssphy0: ss-phy@300 {
+			usb0_ssphy0: phy@300 {
 				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
 				reg = <0x300 0x10>;
 				#phy-cells = <0>;
@@ -677,7 +727,7 @@
 				vbus-supply = <&usb0_vbus0>;
 			};
 
-			usb0_ssphy1: ss-phy@310 {
+			usb0_ssphy1: phy@310 {
 				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
 				reg = <0x310 0x10>;
 				#phy-cells = <0>;
@@ -694,7 +744,7 @@
 			status = "disabled";
 			reg = <0x65c00000 0xcd00>;
 			interrupt-names = "dwc_usb3";
-			interrupts = <0 137 4>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -704,14 +754,15 @@
 			dr_mode = "host";
 		};
 
-		usb-glue@65d00000 {
+		usb-controller@65d00000 {
 			compatible = "socionext,uniphier-pxs2-dwc3-glue",
 				     "simple-mfd";
+			reg = <0x65d00000 0x400>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x65d00000 0x400>;
 
-			usb1_rst: reset@0 {
+			usb1_rst: reset-controller@0 {
 				compatible = "socionext,uniphier-pxs2-usb3-reset";
 				reg = <0x0 0x4>;
 				#reset-cells = <1>;
@@ -739,7 +790,7 @@
 				resets = <&sys_rst 15>;
 			};
 
-			usb1_hsphy0: hs-phy@200 {
+			usb1_hsphy0: phy@200 {
 				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
 				reg = <0x200 0x10>;
 				#phy-cells = <0>;
@@ -750,7 +801,7 @@
 				vbus-supply = <&usb1_vbus0>;
 			};
 
-			usb1_hsphy1: hs-phy@210 {
+			usb1_hsphy1: phy@210 {
 				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
 				reg = <0x210 0x10>;
 				#phy-cells = <0>;
@@ -761,7 +812,7 @@
 				vbus-supply = <&usb1_vbus1>;
 			};
 
-			usb1_ssphy0: ss-phy@300 {
+			usb1_ssphy0: phy@300 {
 				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
 				reg = <0x300 0x10>;
 				#phy-cells = <0>;
@@ -780,7 +831,7 @@
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 65 4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
diff --git a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi b/arch/arm/boot/dts/socionext/uniphier-ref-daughter.dtsi
index a11897669c26..a11897669c26 100644
--- a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
+++ b/arch/arm/boot/dts/socionext/uniphier-ref-daughter.dtsi
diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/socionext/uniphier-sld8-ref.dts
index 6db949ec7411..2446f9e15360 100644
--- a/arch/arm/boot/dts/uniphier-sld8-ref.dts
+++ b/arch/arm/boot/dts/socionext/uniphier-sld8-ref.dts
@@ -36,11 +36,11 @@
 };
 
 &ethsc {
-	interrupts = <0 8>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serialsc {
-	interrupts = <0 8>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serial0 {
@@ -56,7 +56,7 @@
 };
 
 &gpio {
-	xirq0 {
+	xirq0-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
 		input;
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/socionext/uniphier-sld8.dtsi
index 96a766deb8d1..f876282760e9 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/socionext/uniphier-sld8.dtsi
@@ -6,6 +6,7 @@
 //   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
 
 #include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "socionext,uniphier-sld8";
@@ -55,7 +56,8 @@
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
 			      <0x506c0000 0x400>;
-			interrupts = <0 174 4>, <0 175 4>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-size = <(256 * 1024)>;
 			cache-sets = <256>;
@@ -69,7 +71,7 @@
 			reg = <0x54006000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 39 4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
 			clocks = <&peri_clk 11>;
@@ -80,7 +82,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006800 0x40>;
-			interrupts = <0 33 4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
 			clocks = <&peri_clk 0>;
@@ -91,7 +93,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006900 0x40>;
-			interrupts = <0 35 4>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
 			clocks = <&peri_clk 1>;
@@ -102,7 +104,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006a00 0x40>;
-			interrupts = <0 37 4>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
 			clocks = <&peri_clk 2>;
@@ -113,7 +115,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006b00 0x40>;
-			interrupts = <0 29 4>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
 			clocks = <&peri_clk 3>;
@@ -144,7 +146,7 @@
 			reg = <0x58400000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 41 1>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
 			clocks = <&peri_clk 4>;
@@ -158,7 +160,7 @@
 			reg = <0x58480000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 42 1>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
 			clocks = <&peri_clk 5>;
@@ -172,7 +174,7 @@
 			reg = <0x58500000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 43 1>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2>;
 			clocks = <&peri_clk 6>;
@@ -186,7 +188,7 @@
 			reg = <0x58580000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 44 1>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
 			clocks = <&peri_clk 7>;
@@ -209,33 +211,33 @@
 			reg = <0x59801000 0x400>;
 		};
 
-		mioctrl@59810000 {
+		mioctrl: syscon@59810000 {
 			compatible = "socionext,uniphier-sld8-mioctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59810000 0x800>;
 
-			mio_clk: clock {
+			mio_clk: clock-controller {
 				compatible = "socionext,uniphier-sld8-mio-clock";
 				#clock-cells = <1>;
 			};
 
-			mio_rst: reset {
+			mio_rst: reset-controller {
 				compatible = "socionext,uniphier-sld8-mio-reset";
 				#reset-cells = <1>;
 			};
 		};
 
-		perictrl@59820000 {
+		syscon@59820000 {
 			compatible = "socionext,uniphier-sld8-perictrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59820000 0x200>;
 
-			peri_clk: clock {
+			peri_clk: clock-controller {
 				compatible = "socionext,uniphier-sld8-peri-clock";
 				#clock-cells = <1>;
 			};
 
-			peri_rst: reset {
+			peri_rst: reset-controller {
 				compatible = "socionext,uniphier-sld8-peri-reset";
 				#reset-cells = <1>;
 			};
@@ -244,8 +246,13 @@
 		dmac: dma-controller@5a000000 {
 			compatible = "socionext,uniphier-mio-dmac";
 			reg = <0x5a000000 0x1000>;
-			interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
-				     <0 71 4>, <0 72 4>, <0 73 4>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&mio_clk 7>;
 			resets = <&mio_rst 7>;
 			#dma-cells = <1>;
@@ -255,7 +262,7 @@
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a400000 0x200>;
-			interrupts = <0 76 4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default", "uhs";
 			pinctrl-0 = <&pinctrl_sd>;
 			pinctrl-1 = <&pinctrl_sd_uhs>;
@@ -269,13 +276,14 @@
 			sd-uhs-sdr12;
 			sd-uhs-sdr25;
 			sd-uhs-sdr50;
+			socionext,syscon-uhs-mode = <&mioctrl 0>;
 		};
 
 		emmc: mmc@5a500000 {
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a500000 0x200>;
-			interrupts = <0 78 4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&mio_clk 1>;
@@ -293,7 +301,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a800100 0x100>;
-			interrupts = <0 80 4>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
@@ -307,7 +315,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a810100 0x100>;
-			interrupts = <0 81 4>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
@@ -321,7 +329,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a820100 0x100>;
-			interrupts = <0 82 4>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb2>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
@@ -331,7 +339,7 @@
 			has-transaction-translator;
 		};
 
-		soc-glue@5f800000 {
+		syscon@5f800000 {
 			compatible = "socionext,uniphier-sld8-soc-glue",
 				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
@@ -341,9 +349,10 @@
 			};
 		};
 
-		soc-glue@5f900000 {
+		syscon@5f900000 {
 			compatible = "socionext,uniphier-sld8-soc-glue-debug",
-				     "simple-mfd";
+				     "simple-mfd", "syscon";
+			reg = <0x5f900000 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x5f900000 0x2000>;
@@ -362,14 +371,16 @@
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x104>;
+			interrupts = <GIC_PPI 11
+				(GIC_CPU_MASK_RAW(1) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
 		timer@60000600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x104>;
+			interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_RAW(1) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
@@ -388,17 +399,17 @@
 			#interrupt-cells = <2>;
 		};
 
-		sysctrl@61840000 {
+		syscon@61840000 {
 			compatible = "socionext,uniphier-sld8-sysctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x61840000 0x10000>;
 
-			sys_clk: clock {
+			sys_clk: clock-controller {
 				compatible = "socionext,uniphier-sld8-clock";
 				#clock-cells = <1>;
 			};
 
-			sys_rst: reset {
+			sys_rst: reset-controller {
 				compatible = "socionext,uniphier-sld8-reset";
 				#reset-cells = <1>;
 			};
@@ -411,7 +422,7 @@
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 65 4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/socionext/uniphier-support-card.dtsi
index 444802fee9fb..97e7d5db8eb8 100644
--- a/arch/arm/boot/dts/uniphier-support-card.dtsi
+++ b/arch/arm/boot/dts/socionext/uniphier-support-card.dtsi
@@ -8,13 +8,13 @@
 &system_bus {
 	status = "okay";
 	ranges = <1 0x00000000 0x42000000 0x02000000>;
-	interrupt-parent = <&gpio>;
 
 	ethsc: ethernet@1,1f00000 {
 		compatible = "smsc,lan9118", "smsc,lan9115";
 		reg = <1 0x01f00000 0x1000>;
 		phy-mode = "mii";
 		reg-io-width = <4>;
+		interrupt-parent = <&gpio>;
 	};
 
 	serialsc: serial@1,1fb0000 {
@@ -22,5 +22,6 @@
 		reg = <1 0x01fb0000 0x20>;
 		clock-frequency = <12288000>;
 		reg-shift = <1>;
+		interrupt-parent = <&gpio>;
 	};
 };
diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile
new file mode 100644
index 000000000000..e906bf6ba004
--- /dev/null
+++ b/arch/arm/boot/dts/st/Makefile
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_NOMADIK) += \
+	ste-nomadik-s8815.dtb \
+	ste-nomadik-nhk15.dtb
+dtb-$(CONFIG_ARCH_SPEAR13XX) += \
+	spear1310-evb.dtb \
+	spear1340-evb.dtb
+dtb-$(CONFIG_ARCH_SPEAR3XX) += \
+	spear300-evb.dtb \
+	spear310-evb.dtb \
+	spear320-evb.dtb \
+	spear320-hmi.dtb
+dtb-$(CONFIG_ARCH_SPEAR6XX) += \
+	spear600-evb.dtb
+dtb-$(CONFIG_ARCH_STI) += \
+	stih410-b2260.dtb \
+	stih418-b2199.dtb \
+	stih418-b2264.dtb
+dtb-$(CONFIG_ARCH_STM32) += \
+	stm32f429-disco.dtb \
+	stm32f469-disco.dtb \
+	stm32f746-disco.dtb \
+	stm32f769-disco.dtb \
+	stm32f769-disco-mb1166-reva09.dtb \
+	stm32429i-eval.dtb \
+	stm32746g-eval.dtb \
+	stm32h743i-eval.dtb \
+	stm32h743i-disco.dtb \
+	stm32h747i-disco.dtb \
+	stm32h750i-art-pi.dtb \
+	stm32mp133c-prihmb.dtb \
+	stm32mp135f-dhcor-dhsbc.dtb \
+	stm32mp135f-dk.dtb \
+	stm32mp151a-prtt1a.dtb \
+	stm32mp151a-prtt1c.dtb \
+	stm32mp151a-prtt1s.dtb \
+	stm32mp151a-dhcor-testbench.dtb \
+	stm32mp151c-mecio1r0.dtb \
+	stm32mp151c-mect1s.dtb \
+	stm32mp151c-plyaqm.dtb \
+	stm32mp153c-dhcom-drc02.dtb \
+	stm32mp153c-dhcor-drc-compact.dtb \
+	stm32mp153c-lxa-fairytux2-gen1.dtb \
+	stm32mp153c-lxa-fairytux2-gen2.dtb \
+	stm32mp153c-lxa-tac-gen3.dtb \
+	stm32mp153c-mecio1r1.dtb \
+	stm32mp157a-avenger96.dtb \
+	stm32mp157a-dhcor-avenger96.dtb \
+	stm32mp157a-dk1.dtb \
+	stm32mp157a-dk1-scmi.dtb \
+	stm32mp157a-iot-box.dtb \
+	stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
+	stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
+	stm32mp157a-icore-stm32mp1-ctouch2.dtb \
+	stm32mp157a-icore-stm32mp1-ctouch2-of10.dtb \
+	stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
+	stm32mp157a-stinger96.dtb \
+	stm32mp157c-dhcom-pdk2.dtb \
+	stm32mp157c-dhcom-picoitx.dtb \
+	stm32mp157c-dk2.dtb \
+	stm32mp157c-dk2-scmi.dtb \
+	stm32mp157c-ed1.dtb \
+	stm32mp157c-ed1-scmi.dtb \
+	stm32mp157c-emsbc-argon.dtb \
+	stm32mp157c-ev1.dtb \
+	stm32mp157c-ev1-scmi.dtb \
+	stm32mp157c-lxa-mc1.dtb \
+	stm32mp157c-lxa-tac-gen1.dtb \
+	stm32mp157c-lxa-tac-gen2.dtb \
+	stm32mp157c-odyssey.dtb \
+	stm32mp157c-osd32mp1-red.dtb \
+	stm32mp157c-phycore-stm32mp1-3.dtb \
+	stm32mp157c-ultra-fly-sbc.dtb \
+	stm32mp157f-dk2.dtb
+dtb-$(CONFIG_ARCH_U8500) += \
+	ste-snowball.dtb \
+	ste-hrefprev60-stuib.dtb \
+	ste-hrefprev60-tvk.dtb \
+	ste-hrefv60plus-stuib.dtb \
+	ste-hrefv60plus-tvk.dtb \
+	ste-href520-tvk.dtb \
+	ste-ux500-samsung-golden.dtb \
+	ste-ux500-samsung-janice.dtb \
+	ste-ux500-samsung-gavini.dtb \
+	ste-ux500-samsung-codina.dtb \
+	ste-ux500-samsung-codina-tmo.dtb \
+	ste-ux500-samsung-skomer.dtb \
+	ste-ux500-samsung-kyle.dtb
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/st/spear1310-evb.dts
index 05408df38203..417a064db11e 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/st/spear1310-evb.dts
@@ -159,7 +159,7 @@
 			};
 		};
 
-		gmac0: eth@e2000000 {
+		gmac0: ethernet@e2000000 {
 			phy-mode = "gmii";
 			status = "okay";
 		};
@@ -205,19 +205,19 @@
 			};
 		};
 
-		ehci@e4800000 {
+		usb@e4800000 {
 			status = "okay";
 		};
 
-		ehci@e5800000 {
+		usb@e5800000 {
 			status = "okay";
 		};
 
-		ohci@e4000000 {
+		usb@e4000000 {
 			status = "okay";
 		};
 
-		ohci@e5000000 {
+		usb@e5000000 {
 			status = "okay";
 		};
 
@@ -352,9 +352,7 @@
 					#size-cells = <0>;
 					spi-max-frequency = <1000000>;
 					spi-cpha;
-					pl022,hierarchy = <0>;
 					pl022,interface = <0>;
-					pl022,slave-tx-disable;
 					pl022,com-mode = <0>;
 					pl022,rx-level-trig = <0>;
 					pl022,tx-level-trig = <0>;
@@ -385,9 +383,7 @@
 					spi-max-frequency = <12000000>;
 					spi-cpol;
 					spi-cpha;
-					pl022,hierarchy = <0>;
 					pl022,interface = <0>;
-					pl022,slave-tx-disable;
 					pl022,com-mode = <0x2>;
 					pl022,rx-level-trig = <0>;
 					pl022,tx-level-trig = <0>;
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/st/spear1310.dtsi
index 2f746a9428a7..1498996be14e 100644
--- a/arch/arm/boot/dts/spear1310.dtsi
+++ b/arch/arm/boot/dts/st/spear1310.dtsi
@@ -11,7 +11,7 @@
 	compatible = "st,spear1310";
 
 	ahb {
-		spics: spics@e0700000{
+		spics: spics@e0700000 {
 			compatible = "st,spear-spics-gpio";
 			reg = <0xe0700000 0x1000>;
 			st-spics,peripcfg-reg = <0x3b0>;
@@ -128,7 +128,7 @@
 			status = "disabled";
 		};
 
-		gmac1: eth@5c400000 {
+		gmac1: ethernet@5c400000 {
 			compatible = "st,spear600-gmac";
 			reg = <0x5c400000 0x8000>;
 			interrupts = <0 95 0x4>;
@@ -137,7 +137,7 @@
 			status = "disabled";
 		};
 
-		gmac2: eth@5c500000 {
+		gmac2: ethernet@5c500000 {
 			compatible = "st,spear600-gmac";
 			reg = <0x5c500000 0x8000>;
 			interrupts = <0 96 0x4>;
@@ -146,7 +146,7 @@
 			status = "disabled";
 		};
 
-		gmac3: eth@5c600000 {
+		gmac3: ethernet@5c600000 {
 			compatible = "st,spear600-gmac";
 			reg = <0x5c600000 0x8000>;
 			interrupts = <0 97 0x4>;
@@ -155,7 +155,7 @@
 			status = "disabled";
 		};
 
-		gmac4: eth@5c700000 {
+		gmac4: ethernet@5c700000 {
 			compatible = "st,spear600-gmac";
 			reg = <0x5c700000 0x8000>;
 			interrupts = <0 98 0x4>;
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/st/spear1340-evb.dts
index 7700f2afc128..9e7c356b1d9e 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/st/spear1340-evb.dts
@@ -157,7 +157,7 @@
 			};
 		};
 
-		gmac0: eth@e2000000 {
+		gmac0: ethernet@e2000000 {
 			phy-mode = "rgmii";
 			status = "okay";
 		};
@@ -203,7 +203,7 @@
 			};
 		};
 
-		ehci@e4800000 {
+		usb@e4800000 {
 			status = "okay";
 		};
 
@@ -221,7 +221,7 @@
 			};
 		};
 
-		ehci@e5800000 {
+		usb@e5800000 {
 			status = "okay";
 		};
 
@@ -238,11 +238,11 @@
 			status = "okay";
 		};
 
-		ohci@e4000000 {
+		usb@e4000000 {
 			status = "okay";
 		};
 
-		ohci@e5000000 {
+		usb@e5000000 {
 			status = "okay";
 		};
 
@@ -445,9 +445,7 @@
 					spi-max-frequency = <12000000>;
 					spi-cpol;
 					spi-cpha;
-					pl022,hierarchy = <0>;
 					pl022,interface = <0>;
-					pl022,slave-tx-disable;
 					pl022,com-mode = <0x2>;
 					pl022,rx-level-trig = <0>;
 					pl022,tx-level-trig = <0>;
@@ -461,9 +459,7 @@
 					spi-max-frequency = <1000000>;
 					spi-cpha;
 					reg = <1>;
-					pl022,hierarchy = <0>;
 					pl022,interface = <0>;
-					pl022,slave-tx-disable;
 					pl022,com-mode = <0>;
 					pl022,rx-level-trig = <0>;
 					pl022,tx-level-trig = <0>;
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/st/spear1340.dtsi
index 818886e11713..51f6ffd08b42 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/st/spear1340.dtsi
@@ -12,7 +12,7 @@
 
 	ahb {
 
-		spics: spics@e0700000{
+		spics: spics@e0700000 {
 			compatible = "st,spear-spics-gpio";
 			reg = <0xe0700000 0x1000>;
 			st-spics,peripcfg-reg = <0x42c>;
@@ -63,8 +63,8 @@
 			compatible = "snps,designware-i2s";
 			reg = <0xb2400000 0x10000>;
 			interrupt-names = "play_irq";
-			interrupts = <0 98 0x4
-				      0 99 0x4>;
+			interrupts = <0 98 0x4>,
+				     <0 99 0x4>;
 			play;
 			channel = <8>;
 			status = "disabled";
@@ -74,8 +74,8 @@
 			compatible = "snps,designware-i2s";
 			reg = <0xb2000000 0x10000>;
 			interrupt-names = "record_irq";
-			interrupts = <0 100  0x4
-				      0 101 0x4>;
+			interrupts = <0 100 0x4>,
+				     <0 101 0x4>;
 			record;
 			channel = <8>;
 			status = "disabled";
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/st/spear13xx.dtsi
index 913553367687..159e941708ca 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/st/spear13xx.dtsi
@@ -39,8 +39,8 @@
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 6 0x04
-			      0 7 0x04>;
+		interrupts = <0 6 0x04>,
+			     <0 7 0x04>;
 	};
 
 	L2: cache-controller {
@@ -141,19 +141,19 @@
 			       0xb0820000 0x0010	/* NAND Base ADDR */
 			       0xb0810000 0x0010>;	/* NAND Base CMD */
 			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
-			interrupts = <0 20 0x4
-				      0 21 0x4
-				      0 22 0x4
-				      0 23 0x4>;
+			interrupts = <0 20 0x4>,
+				     <0 21 0x4>,
+				     <0 22 0x4>,
+				     <0 23 0x4>;
 			st,mode = <2>;
 			status = "disabled";
 		};
 
-		gmac0: eth@e2000000 {
+		gmac0: ethernet@e2000000 {
 			compatible = "st,spear600-gmac";
 			reg = <0xe2000000 0x8000>;
-			interrupts = <0 33 0x4
-				      0 34 0x4>;
+			interrupts = <0 33 0x4>,
+				     <0 34 0x4>;
 			interrupt-names = "macirq", "eth_wake_irq";
 			status = "disabled";
 		};
@@ -174,7 +174,7 @@
 			status = "disabled";
 		};
 
-		ehci@e4800000 {
+		usb@e4800000 {
 			compatible = "st,spear600-ehci", "usb-ehci";
 			reg = <0xe4800000 0x1000>;
 			interrupts = <0 64 0x4>;
@@ -182,7 +182,7 @@
 			status = "disabled";
 		};
 
-		ehci@e5800000 {
+		usb@e5800000 {
 			compatible = "st,spear600-ehci", "usb-ehci";
 			reg = <0xe5800000 0x1000>;
 			interrupts = <0 66 0x4>;
@@ -190,7 +190,7 @@
 			status = "disabled";
 		};
 
-		ohci@e4000000 {
+		usb@e4000000 {
 			compatible = "st,spear600-ohci", "usb-ohci";
 			reg = <0xe4000000 0x1000>;
 			interrupts = <0 65 0x4>;
@@ -198,7 +198,7 @@
 			status = "disabled";
 		};
 
-		ohci@e5000000 {
+		usb@e5000000 {
 			compatible = "st,spear600-ohci", "usb-ohci";
 			reg = <0xe5000000 0x1000>;
 			interrupts = <0 67 0x4>;
@@ -263,8 +263,8 @@
 				compatible = "st,designware-i2s";
 				reg = <0xe0180000 0x1000>;
 				interrupt-names = "play_irq", "record_irq";
-				interrupts = <0 10 0x4
-					      0 11 0x4 >;
+				interrupts = <0 10 0x4>,
+					     <0 11 0x4>;
 				status = "disabled";
 			};
 
@@ -272,8 +272,8 @@
 				compatible = "st,designware-i2s";
 				reg = <0xe0200000 0x1000>;
 				interrupt-names = "play_irq", "record_irq";
-				interrupts = <0 26 0x4
-					      0 53 0x4>;
+				interrupts = <0 26 0x4>,
+					     <0 53 0x4>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/st/spear300-evb.dts
index 303ef29fb805..80fae76d4610 100644
--- a/arch/arm/boot/dts/spear300-evb.dts
+++ b/arch/arm/boot/dts/st/spear300-evb.dts
@@ -69,7 +69,7 @@
 			status = "okay";
 		};
 
-		gmac: eth@e0800000 {
+		gmac: ethernet@e0800000 {
 			status = "okay";
 		};
 
@@ -119,15 +119,15 @@
 			status = "okay";
 		};
 
-		ehci@e1800000 {
+		usb@e1800000 {
 			status = "okay";
 		};
 
-		ohci@e1900000 {
+		usb@e1900000 {
 			status = "okay";
 		};
 
-		ohci@e2100000 {
+		usb@e2100000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/st/spear300.dtsi
index b39bd5a22627..f1135e887f7b 100644
--- a/arch/arm/boot/dts/spear300.dtsi
+++ b/arch/arm/boot/dts/st/spear300.dtsi
@@ -46,7 +46,7 @@
 			status = "disabled";
 		};
 
-		shirq: interrupt-controller@0x50000000 {
+		shirq: interrupt-controller@50000000 {
 			compatible = "st,spear300-shirq";
 			reg = <0x50000000 0x1000>;
 			interrupts = <28>;
diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/st/spear310-evb.dts
index ea0b53036f7b..a3449eb7e59b 100644
--- a/arch/arm/boot/dts/spear310-evb.dts
+++ b/arch/arm/boot/dts/st/spear310-evb.dts
@@ -88,7 +88,7 @@
 			status = "okay";
 		};
 
-		gmac: eth@e0800000 {
+		gmac: ethernet@e0800000 {
 			status = "okay";
 		};
 
@@ -133,15 +133,15 @@
 			status = "okay";
 		};
 
-		ehci@e1800000 {
+		usb@e1800000 {
 			status = "okay";
 		};
 
-		ohci@e1900000 {
+		usb@e1900000 {
 			status = "okay";
 		};
 
-		ohci@e2100000 {
+		usb@e2100000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/st/spear310.dtsi
index 77570833d46b..ce08d8820940 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/st/spear310.dtsi
@@ -34,7 +34,7 @@
 			status = "disabled";
 		};
 
-		shirq: interrupt-controller@0xb4000000 {
+		shirq: interrupt-controller@b4000000 {
 			compatible = "st,spear310-shirq";
 			reg = <0xb4000000 0x1000>;
 			interrupts = <28 29 30 1>;
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/st/spear320-evb.dts
index 3c026d021c92..984075e60634 100644
--- a/arch/arm/boot/dts/spear320-evb.dts
+++ b/arch/arm/boot/dts/st/spear320-evb.dts
@@ -84,7 +84,7 @@
 			status = "okay";
 		};
 
-		gmac: eth@e0800000 {
+		gmac: ethernet@e0800000 {
 			status = "okay";
 		};
 
@@ -142,15 +142,15 @@
 			status = "okay";
 		};
 
-		ehci@e1800000 {
+		usb@e1800000 {
 			status = "okay";
 		};
 
-		ohci@e1900000 {
+		usb@e1900000 {
 			status = "okay";
 		};
 
-		ohci@e2100000 {
+		usb@e2100000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/st/spear320-hmi.dts
index 34503ac9c51c..8010918e5257 100644
--- a/arch/arm/boot/dts/spear320-hmi.dts
+++ b/arch/arm/boot/dts/st/spear320-hmi.dts
@@ -92,7 +92,7 @@
 			status = "okay";
 		};
 
-		ehci@e1800000 {
+		usb@e1800000 {
 			status = "okay";
 		};
 
@@ -147,11 +147,11 @@
 			};
 		};
 
-		ohci@e1900000 {
+		usb@e1900000 {
 			status = "okay";
 		};
 
-		ohci@e2100000 {
+		usb@e2100000 {
 			status = "okay";
 		};
 
@@ -241,7 +241,7 @@
 					irq-trigger = <0x1>;
 
 					stmpegpio: stmpe-gpio {
-						compatible = "stmpe,gpio";
+						compatible = "st,stmpe-gpio";
 						reg = <0>;
 						gpio-controller;
 						#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/st/spear320.dtsi
index b12474446a48..56f141297ea3 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/st/spear320.dtsi
@@ -49,7 +49,7 @@
 			status = "disabled";
 		};
 
-		shirq: interrupt-controller@0xb3000000 {
+		shirq: interrupt-controller@b3000000 {
 			compatible = "st,spear320-shirq";
 			reg = <0xb3000000 0x1000>;
 			interrupts = <30 28 29 1>;
diff --git a/arch/arm/boot/dts/spear320s.dtsi b/arch/arm/boot/dts/st/spear320s.dtsi
index 133236dc190d..133236dc190d 100644
--- a/arch/arm/boot/dts/spear320s.dtsi
+++ b/arch/arm/boot/dts/st/spear320s.dtsi
diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/st/spear3xx.dtsi
index cc88ebe7a60c..54e87ac98164 100644
--- a/arch/arm/boot/dts/spear3xx.dtsi
+++ b/arch/arm/boot/dts/st/spear3xx.dtsi
@@ -46,7 +46,7 @@
 			status = "disabled";
 		};
 
-		gmac: eth@e0800000 {
+		gmac: ethernet@e0800000 {
 			compatible = "snps,dwmac-3.40a";
 			reg = <0xe0800000 0x8000>;
 			interrupts = <23 22>;
@@ -73,21 +73,21 @@
 			status = "disabled";
 		};
 
-		ehci@e1800000 {
+		usb@e1800000 {
 			compatible = "st,spear600-ehci", "usb-ehci";
 			reg = <0xe1800000 0x1000>;
 			interrupts = <26>;
 			status = "disabled";
 		};
 
-		ohci@e1900000 {
+		usb@e1900000 {
 			compatible = "st,spear600-ohci", "usb-ohci";
 			reg = <0xe1900000 0x1000>;
 			interrupts = <25>;
 			status = "disabled";
 		};
 
-		ohci@e2100000 {
+		usb@e2100000 {
 			compatible = "st,spear600-ohci", "usb-ohci";
 			reg = <0xe2100000 0x1000>;
 			interrupts = <27>;
diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/st/spear600-evb.dts
index a25b86d149ad..a25b86d149ad 100644
--- a/arch/arm/boot/dts/spear600-evb.dts
+++ b/arch/arm/boot/dts/st/spear600-evb.dts
diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/st/spear600.dtsi
index fd41243a0b2c..9a93367445ca 100644
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/st/spear600.dtsi
@@ -47,7 +47,7 @@
 			compatible = "arm,pl110", "arm,primecell";
 			reg = <0xfc200000 0x1000>;
 			interrupt-parent = <&vic1>;
-			interrupts = <12>;
+			interrupts = <13>;
 			status = "disabled";
 		};
 
@@ -91,7 +91,7 @@
 			status = "disabled";
 		};
 
-		ehci_usb0: ehci@e1800000 {
+		ehci_usb0: usb@e1800000 {
 			compatible = "st,spear600-ehci", "usb-ehci";
 			reg = <0xe1800000 0x1000>;
 			interrupt-parent = <&vic1>;
@@ -99,7 +99,7 @@
 			status = "disabled";
 		};
 
-		ehci_usb1: ehci@e2000000 {
+		ehci_usb1: usb@e2000000 {
 			compatible = "st,spear600-ehci", "usb-ehci";
 			reg = <0xe2000000 0x1000>;
 			interrupt-parent = <&vic1>;
@@ -107,7 +107,7 @@
 			status = "disabled";
 		};
 
-		ohci_usb0: ohci@e1900000 {
+		ohci_usb0: usb@e1900000 {
 			compatible = "st,spear600-ohci", "usb-ohci";
 			reg = <0xe1900000 0x1000>;
 			interrupt-parent = <&vic1>;
@@ -115,7 +115,7 @@
 			status = "disabled";
 		};
 
-		ohci_usb1: ohci@e2100000 {
+		ohci_usb1: usb@e2100000 {
 			compatible = "st,spear600-ohci", "usb-ohci";
 			reg = <0xe2100000 0x1000>;
 			interrupt-parent = <&vic1>;
@@ -207,6 +207,36 @@
 				interrupts = <6>;
 				status = "disabled";
 			};
+
+			ssp1: spi@d0100000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0xd0100000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-parent = <&vic0>;
+				interrupts = <26>;
+				status = "disabled";
+			};
+
+			ssp2: spi@d0180000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0xd0180000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-parent = <&vic0>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			ssp3: spi@d8180000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0xd8180000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-parent = <&vic1>;
+				interrupts = <5>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/st-pincfg.h b/arch/arm/boot/dts/st/st-pincfg.h
index d80551202292..d80551202292 100644
--- a/arch/arm/boot/dts/st-pincfg.h
+++ b/arch/arm/boot/dts/st/st-pincfg.h
diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/st/ste-ab8500.dtsi
index dd30d08ccb9b..dd30d08ccb9b 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/st/ste-ab8500.dtsi
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/st/ste-ab8505.dtsi
index 131c82508e82..131c82508e82 100644
--- a/arch/arm/boot/dts/ste-ab8505.dtsi
+++ b/arch/arm/boot/dts/st/ste-ab8505.dtsi
diff --git a/arch/arm/boot/dts/ste-db8500.dtsi b/arch/arm/boot/dts/st/ste-db8500.dtsi
index f1ff3f4835d7..f1ff3f4835d7 100644
--- a/arch/arm/boot/dts/ste-db8500.dtsi
+++ b/arch/arm/boot/dts/st/ste-db8500.dtsi
diff --git a/arch/arm/boot/dts/ste-db8520.dtsi b/arch/arm/boot/dts/st/ste-db8520.dtsi
index e4e8d5fc1f8a..e4e8d5fc1f8a 100644
--- a/arch/arm/boot/dts/ste-db8520.dtsi
+++ b/arch/arm/boot/dts/st/ste-db8520.dtsi
diff --git a/arch/arm/boot/dts/ste-db9500.dtsi b/arch/arm/boot/dts/st/ste-db9500.dtsi
index 4273d36e881d..4273d36e881d 100644
--- a/arch/arm/boot/dts/ste-db9500.dtsi
+++ b/arch/arm/boot/dts/st/ste-db9500.dtsi
diff --git a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi b/arch/arm/boot/dts/st/ste-dbx5x0-pinctrl.dtsi
index 31a86606beda..9a6304b7ab25 100644
--- a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/ste-dbx5x0-pinctrl.dtsi
@@ -454,6 +454,31 @@
 			};
 		};
 
+		/* MC2 without feedback clock on A8 */
+		mc2_a_2_default: mc2_a_2_default {
+			default_mux {
+				function = "mc2";
+				groups = "mc2_a_2";
+			};
+			default_cfg1 {
+				pins = "GPIO128_A5"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg2 {
+				pins =
+				"GPIO129_B4", /* CMD */
+				"GPIO131_A12", /* DAT0 */
+				"GPIO132_C10", /* DAT1 */
+				"GPIO133_B10", /* DAT2 */
+				"GPIO134_B9", /* DAT3 */
+				"GPIO135_A9", /* DAT4 */
+				"GPIO136_C7", /* DAT5 */
+				"GPIO137_A7", /* DAT6 */
+				"GPIO138_C5"; /* DAT7 */
+				ste,config = <&in_pu>;
+			};
+		};
+
 		mc2_a_1_sleep: mc2_a_1_sleep {
 			sleep_cfg1 {
 				pins = "GPIO128_A5"; /* CLK */
@@ -478,6 +503,30 @@
 				ste,config = <&in_wkup_pdis>;
 			};
 		};
+
+		mc2_a_2_sleep: mc2_a_2_sleep {
+			sleep_cfg1 {
+				pins = "GPIO128_A5"; /* CLK */
+				ste,config = <&out_lo_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins =
+				"GPIO129_B4"; /* CMD */
+				ste,config = <&in_wkup_pdis_en>;
+			};
+			sleep_cfg3 {
+				pins =
+				"GPIO131_A12", /* DAT0 */
+				"GPIO132_C10", /* DAT1 */
+				"GPIO133_B10", /* DAT2 */
+				"GPIO134_B9", /* DAT3 */
+				"GPIO135_A9", /* DAT4 */
+				"GPIO136_C7", /* DAT5 */
+				"GPIO137_A7", /* DAT6 */
+				"GPIO138_C5"; /* DAT7 */
+				ste,config = <&in_wkup_pdis>;
+			};
+		};
 	};
 
 	sdi4 {
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/st/ste-dbx5x0.dtsi
index 9afe8301bd47..0f87abeddc33 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/st/ste-dbx5x0.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/ste-db8500-clkout.h>
 #include <dt-bindings/reset/stericsson,db8500-prcc-reset.h>
 #include <dt-bindings/mfd/dbx500-prcmu.h>
 #include <dt-bindings/arm/ux500_pm_domains.h>
@@ -109,6 +110,74 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
+		/*
+		 * 640KB ESRAM (embedded static random access memory), divided
+		 * into 5 banks of 128 KB each. This is a fast memory usually
+		 * used by different accelerators. We group these according to
+		 * their power domains: ESRAM0 (always on) ESRAM 1+2 and
+		 * ESRAM 3+4.
+		 */
+		sram@40000000 {
+			/* The first (always on) ESRAM 0, 128 KB */
+			compatible = "mmio-sram";
+			reg = <0x40000000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x40000000 0x20000>;
+
+			sram@0 {
+				compatible = "stericsson,u8500-esram";
+				reg = <0x0 0x10000>;
+				pool;
+			};
+			lcpa: sram@10000 {
+				/*
+				 * This eSRAM is used by the DMA40 DMA controller
+				 * for Logical Channel Paramers (LCP), the address
+				 * where these parameters are stored is called "LCPA".
+				 * This is addressed directly by the driver so no
+				 * pool is used.
+				 */
+				compatible = "stericsson,u8500-esram";
+				label = "DMA40-LCPA";
+				reg = <0x10000 0x800>;
+			};
+			sram@10800 {
+				compatible = "stericsson,u8500-esram";
+				reg = <0x10800 0xf800>;
+				pool;
+			};
+		};
+		sram@40020000 {
+			/* ESRAM 1+2, 256 KB */
+			compatible = "mmio-sram";
+			reg = <0x40020000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x40020000 0x40000>;
+		};
+		sram@40060000 {
+			/* ESRAM 3+4, 256 KB */
+			compatible = "mmio-sram";
+			reg = <0x40060000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x40060000 0x40000>;
+
+			lcla: sram@20000 {
+				/*
+				 * This eSRAM is used by the DMA40 DMA controller
+				 * for Logical Channel Logical Addresses (LCLA), the address
+				 * where these parameters are stored is called "LCLA".
+				 * This is addressed directly by the driver so no
+				 * pool is used.
+				 */
+				compatible = "stericsson,u8500-esram";
+				label = "DMA40-LCLA";
+				reg = <0x20000 0x2000>;
+			};
+		};
+
 		ptm@801ae000 {
 			compatible = "arm,coresight-etm3x", "arm,primecell";
 			reg = <0x801ae000 0x1000>;
@@ -312,6 +381,11 @@
 			smp_twd_clk: smp-twd-clock {
 				#clock-cells = <0>;
 			};
+
+			clkout_clk: clkout-clock {
+				/* Cell 1 id, cell 2 source, cell 3 div */
+				#clock-cells = <3>;
+			};
 		};
 
 		mtu@a03c6000 {
@@ -351,7 +425,7 @@
 		gpio0: gpio@8012e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8012e000 0x80>;
+			reg = <0x8012e000 0x80>;
 			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -366,7 +440,7 @@
 		gpio1: gpio@8012e080 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8012e080 0x80>;
+			reg = <0x8012e080 0x80>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -381,7 +455,7 @@
 		gpio2: gpio@8000e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e000 0x80>;
+			reg = <0x8000e000 0x80>;
 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -396,7 +470,7 @@
 		gpio3: gpio@8000e080 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e080 0x80>;
+			reg = <0x8000e080 0x80>;
 			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -411,7 +485,7 @@
 		gpio4: gpio@8000e100 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e100 0x80>;
+			reg = <0x8000e100 0x80>;
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -426,7 +500,7 @@
 		gpio5: gpio@8000e180 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8000e180 0x80>;
+			reg = <0x8000e180 0x80>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -441,7 +515,7 @@
 		gpio6: gpio@8011e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8011e000 0x80>;
+			reg = <0x8011e000 0x80>;
 			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -456,7 +530,7 @@
 		gpio7: gpio@8011e080 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0x8011e080 0x80>;
+			reg = <0x8011e080 0x80>;
 			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -471,7 +545,7 @@
 		gpio8: gpio@a03fe000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
-			reg =  <0xa03fe000 0x80>;
+			reg = <0xa03fe000 0x80>;
 			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -530,9 +604,10 @@
 
 		dma: dma-controller@801C0000 {
 			compatible = "stericsson,db8500-dma40", "stericsson,dma40";
-			reg = <0x801C0000 0x1000 0x40010000 0x800>;
-			reg-names = "base", "lcpa";
+			reg = <0x801C0000 0x1000>;
+			reg-names = "base";
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			sram = <&lcpa>, <&lcla>;
 
 			#dma-cells = <3>;
 			memcpy-channels = <56 57 58 59 60>;
@@ -846,7 +921,7 @@
 			status = "disabled";
 		};
 
-		serial0: uart@80120000 {
+		serial0: serial@80120000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80120000 0x1000>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -862,7 +937,7 @@
 			status = "disabled";
 		};
 
-		serial1: uart@80121000 {
+		serial1: serial@80121000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80121000 0x1000>;
 			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -878,7 +953,7 @@
 			status = "disabled";
 		};
 
-		serial2: uart@80007000 {
+		serial2: serial@80007000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80007000 0x1000>;
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -1149,17 +1224,15 @@
 			compatible = "stericsson,ux500-cryp";
 			reg = <0xa03cb000 0x1000>;
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-
-			v-ape-supply = <&db8500_vape_reg>;
 			clocks = <&prcc_pclk 6 1>;
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
 		hash@a03c2000 {
 			compatible = "stericsson,ux500-hash";
 			reg = <0xa03c2000 0x1000>;
-
-			v-ape-supply = <&db8500_vape_reg>;
 			clocks = <&prcc_pclk 6 2>;
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/st/ste-href-ab8500.dtsi
index 9fa024900d53..5eeb44c5e932 100644
--- a/arch/arm/boot/dts/ste-href-ab8500.dtsi
+++ b/arch/arm/boot/dts/st/ste-href-ab8500.dtsi
@@ -9,6 +9,54 @@
 	soc {
 		prcmu@80157000 {
 			ab8500 {
+				phy {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				regulator {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+
 				gpio {
 					/* Hog a few default settings */
 					pinctrl-names = "default";
@@ -418,6 +466,24 @@
 						};
 					};
 				};
+				/*
+				 * Charging is not working on the HREF unless an actual battery is
+				 * mounted, most HREFs have a DC cable in to the "battery power"
+				 * which means this will only be cofusing. So do not enable charging
+				 * of the HREFs.
+				 */
+				ab8500_fg {
+					status = "disabled";
+				};
+				ab8500_btemp {
+					status = "disabled";
+				};
+				ab8500_charger {
+					status = "disabled";
+				};
+				ab8500_chargalg {
+					status = "disabled";
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/st/ste-href-ab8505.dtsi b/arch/arm/boot/dts/st/ste-href-ab8505.dtsi
new file mode 100644
index 000000000000..268db68ccf87
--- /dev/null
+++ b/arch/arm/boot/dts/st/ste-href-ab8505.dtsi
@@ -0,0 +1,490 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2023 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include "ste-ab8505.dtsi"
+
+/ {
+	soc {
+		prcmu@80157000 {
+			ab8505 {
+				phy {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				regulator {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+
+				gpio {
+					/* Hog a few default settings */
+					pinctrl-names = "default";
+					pinctrl-0 = <&gpio2_default_mode>,
+						    <&gpio4_default_mode>,
+						    <&gpio10_default_mode>,
+						    <&gpio11_default_mode>,
+						    <&gpio12_default_mode>,
+						    <&gpio13_default_mode>,
+						    <&gpio16_default_mode>,
+						    <&gpio24_default_mode>,
+						    <&gpio25_default_mode>,
+						    <&gpio36_default_mode>,
+						    <&gpio37_default_mode>,
+						    <&gpio38_default_mode>,
+						    <&gpio39_default_mode>,
+						    <&gpio42_default_mode>,
+						    <&gpio26_default_mode>,
+						    <&gpio35_default_mode>,
+						    <&ycbcr_default_mode>,
+						    <&pwm_default_mode>,
+						    <&adi1_default_mode>,
+						    <&usbuicc_default_mode>,
+						    <&dmic_default_mode>,
+						    <&extcpena_default_mode>,
+						    <&modsclsda_default_mode>;
+
+					/*
+					 * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
+					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
+					 */
+					gpio2 {
+						gpio2_default_mode: gpio2_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio2_a_1";
+							};
+							default_cfg {
+								pins = "GPIO2_T9";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio4 {
+						gpio4_default_mode: gpio4_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio4_a_1";
+							};
+							default_cfg {
+								pins = "GPIO4_W2";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio10 {
+						gpio10_default_mode: gpio10_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio10_d_1";
+							};
+							default_cfg {
+								pins = "GPIO10_U17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio11 {
+						gpio11_default_mode: gpio11_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio11_d_1";
+							};
+							default_cfg {
+								pins = "GPIO11_AA18";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio12 {
+						gpio12_default_mode: gpio12_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio12_d_1";
+							};
+							default_cfg {
+								pins = "GPIO12_U16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio13 {
+						gpio13_default_mode: gpio13_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio13_d_1";
+							};
+							default_cfg {
+								pins = "GPIO13_W17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio16 {
+						gpio16_default_mode: gpio16_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio16_a_1";
+							};
+							default_cfg {
+								pins = "GPIO16_F15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio24 {
+						gpio24_default_mode: gpio24_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio24_a_1";
+							};
+							default_cfg {
+								pins = "GPIO24_T14";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio25 {
+						gpio25_default_mode: gpio25_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio25_a_1";
+							};
+							default_cfg {
+								pins = "GPIO25_R16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio36 {
+						gpio36_default_mode: gpio36_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio36_a_1";
+							};
+							default_cfg {
+								pins = "GPIO36_A17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio37 {
+						gpio37_default_mode: gpio37_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio37_a_1";
+							};
+							default_cfg {
+								pins = "GPIO37_E15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio38 {
+						gpio38_default_mode: gpio38_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio38_a_1";
+							};
+							default_cfg {
+								pins = "GPIO38_C17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio39 {
+						gpio39_default_mode: gpio39_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio39_a_1";
+							};
+							default_cfg {
+								pins = "GPIO39_E16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio42 {
+						gpio42_default_mode: gpio42_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio42_a_1";
+							};
+							default_cfg {
+								pins = "GPIO42_U2";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
+					 */
+					gpio26 {
+						gpio26_default_mode: gpio26_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio26_d_1";
+							};
+							default_cfg {
+								pins = "GPIO26_M16";
+								output-low;
+							};
+						};
+					};
+					gpio35 {
+						gpio35_default_mode: gpio35_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio35_d_1";
+							};
+							default_cfg {
+								pins = "GPIO35_W15";
+								output-low;
+							};
+						};
+					};
+					/*
+					 * This sets up the YCBCR connector pins, i.e. analog video out.
+					 * Set as input with no bias.
+					 */
+					ycbcr {
+						ycbcr_default_mode: ycbcr_default {
+							default_mux {
+								function = "ycbcr";
+								groups = "ycbcr0123_d_1";
+							};
+							default_cfg {
+								pins = "GPIO6_Y18",
+									 "GPIO7_AA20",
+									 "GPIO8_W18",
+									 "GPIO9_AA19";
+								input-enable;
+								bias-disable;
+							};
+						};
+					};
+					/* This sets up the PWM pins 14 and 15 */
+					pwm {
+						pwm_default_mode: pwm_default {
+							default_mux {
+								function = "pwmout";
+								groups = "pwmout1_d_1", "pwmout2_d_1";
+							};
+							default_cfg {
+								pins = "GPIO14_F14",
+									 "GPIO15_B17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up audio interface 1 */
+					adi1 {
+						adi1_default_mode: adi1_default {
+							default_mux {
+								function = "adi1";
+								groups = "adi1_d_1";
+							};
+							default_cfg {
+								pins = "GPIO17_P5",
+									 "GPIO18_R5",
+									 "GPIO19_U5",
+									 "GPIO20_T5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up the USB UICC pins */
+					usbuicc {
+						usbuicc_default_mode: usbuicc_default {
+							default_mux {
+								function = "usbuicc";
+								groups = "usbuicc_d_1";
+							};
+							default_cfg {
+								pins = "GPIO21_H19",
+									 "GPIO22_G20",
+									 "GPIO23_G19";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up the microphone pins */
+					dmic {
+						dmic_default_mode: dmic_default {
+							default_mux {
+								function = "dmic";
+								groups = "dmic12_d_1",
+									 "dmic34_d_1",
+									 "dmic56_d_1";
+							};
+							default_cfg {
+								pins = "GPIO27_J6",
+									 "GPIO28_K6",
+									 "GPIO29_G6",
+									 "GPIO30_H6",
+									 "GPIO31_F5",
+									 "GPIO32_G5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					extcpena {
+						extcpena_default_mode: extcpena_default {
+							default_mux {
+								function = "extcpena";
+								groups = "extcpena_d_1";
+							};
+							default_cfg {
+								pins = "GPIO34_R17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* Modem I2C setup (SCL and SDA pins) */
+					modsclsda {
+						modsclsda_default_mode: modsclsda_default {
+							default_mux {
+								function = "modsclsda";
+								groups = "modsclsda_d_1";
+							};
+							default_cfg {
+								pins = "GPIO40_T19",
+									"GPIO41_U19";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Clock output pins associated with regulators.
+					 */
+					sysclkreq2 {
+						sysclkreq2_default_mode: sysclkreq2_default {
+							default_mux {
+								function = "sysclkreq";
+								groups = "sysclkreq2_d_1";
+							};
+							default_cfg {
+								pins = "GPIO1_T10";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq2_sleep_mode: sysclkreq2_sleep {
+							default_mux {
+								function = "gpio";
+								groups = "gpio1_a_1";
+							};
+							default_cfg {
+								pins = "GPIO1_T10";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					sysclkreq4 {
+						sysclkreq4_default_mode: sysclkreq4_default {
+							default_mux {
+								function = "sysclkreq";
+								groups = "sysclkreq4_d_1";
+							};
+							default_cfg {
+								pins = "GPIO3_U9";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq4_sleep_mode: sysclkreq4_sleep {
+							default_mux {
+								function = "gpio";
+								groups = "gpio3_a_1";
+							};
+							default_cfg {
+								pins = "GPIO3_U9";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+				};
+				/*
+				 * Charging is not working on the HREF unless an actual battery is
+				 * mounted, most HREFs have a DC cable in to the "battery power"
+				 * which means this will only be cofusing. So do not enable charging
+				 * of the HREFs.
+				 */
+				ab8500_fg {
+					status = "disabled";
+				};
+				ab8500_btemp {
+					status = "disabled";
+				};
+				ab8500_charger {
+					status = "disabled";
+				};
+				ab8500_chargalg {
+					status = "disabled";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/st/ste-href-family-pinctrl.dtsi
index 434fa6baf71f..434fa6baf71f 100644
--- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/ste-href-family-pinctrl.dtsi
diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/st/ste-href-stuib.dtsi
index e32d0c36feb8..79c2be36acae 100644
--- a/arch/arm/boot/dts/ste-href-stuib.dtsi
+++ b/arch/arm/boot/dts/st/ste-href-stuib.dtsi
@@ -30,12 +30,11 @@
 
 	soc {
 		i2c@80004000 {
-			stmpe1601: stmpe1601@40 {
+			stmpe1601: port-expander@40 {
 				compatible = "st,stmpe1601";
 				reg = <0x40>;
 				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
 				interrupt-parent = <&gpio6>;
-				interrupt-controller;
 				vcc-supply = <&db8500_vsmps2_reg>;
 				vio-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
@@ -44,7 +43,7 @@
 				wakeup-source;
 				st,autosleep-timeout = <1024>;
 
-				stmpe_keypad {
+				keyboard-controller {
 					compatible = "st,stmpe-keypad";
 
 					debounce-interval = <64>;
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/st/ste-href-tvk1281618-r2.dtsi
index 37e59403c01f..7448135e25f6 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
+++ b/arch/arm/boot/dts/st/ste-href-tvk1281618-r2.dtsi
@@ -192,7 +192,7 @@
 				#size-cells = <0>;
 				reg = <0x4b>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
+				vio-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&synaptics_tvk_mode>;
 				interrupt-parent = <&gpio2>;
@@ -200,7 +200,7 @@
 
 				rmi4-f01@1 {
 					reg = <0x1>;
-					syna,nosleep = <1>;
+					syna,nosleep-mode = <1>;
 				};
 				rmi4-f11@11 {
 					reg = <0x11>;
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/st/ste-href-tvk1281618-r3.dtsi
index 00ce9d79f540..00ce9d79f540 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
+++ b/arch/arm/boot/dts/st/ste-href-tvk1281618-r3.dtsi
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/st/ste-href.dtsi
index fbaa0ce46427..fbf0309e108f 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/st/ste-href.dtsi
@@ -24,6 +24,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
@@ -37,7 +45,7 @@
 	};
 
 	soc {
-		uart@80120000 {
+		serial@80120000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u0_a_1_default>;
 			pinctrl-1 = <&u0_a_1_sleep>;
@@ -45,13 +53,13 @@
 		};
 
 		/* This UART is unused and thus left disabled */
-		uart@80121000 {
+		serial@80121000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u1rxtx_a_1_default>;
 			pinctrl-1 = <&u1rxtx_a_1_sleep>;
 		};
 
-		uart@80007000 {
+		serial@80007000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u2rxtx_c_1_default>;
 			pinctrl-1 = <&u2rxtx_c_1_sleep>;
@@ -84,20 +92,20 @@
 				clock-mode = /bits/ 8 <2>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				chan@0 {
+				led@0 {
 					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 					color = <LED_COLOR_ID_BLUE>;
 					linux,default-trigger = "heartbeat";
 				};
-				chan@1 {
+				led@1 {
 					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 					color = <LED_COLOR_ID_BLUE>;
 				};
-				chan@2 {
+				led@2 {
 					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
@@ -111,19 +119,19 @@
 				clock-mode = /bits/ 8 <2>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				chan@0 {
+				led@0 {
 					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 					color = <LED_COLOR_ID_BLUE>;
 				};
-				chan@1 {
+				led@1 {
 					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 					color = <LED_COLOR_ID_BLUE>;
 				};
-				chan@2 {
+				led@2 {
 					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
@@ -234,61 +242,6 @@
 			status = "okay";
 		};
 
-		prcmu@80157000 {
-			ab8500 {
-				gpio {
-				};
-
-				phy {
-					pinctrl-names = "default", "sleep";
-					pinctrl-0 = <&usb_a_1_default>;
-					pinctrl-1 = <&usb_a_1_sleep>;
-				};
-
-				regulator {
-					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-name = "V-DISPLAY";
-					};
-
-					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-name = "V-eMMC1";
-					};
-
-					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-name = "V-MMC-SD";
-					};
-
-					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
-						regulator-name = "V-INTCORE";
-					};
-
-					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-name = "V-TVOUT";
-					};
-
-					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-name = "V-AUD";
-					};
-
-					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-name = "V-AMIC1";
-					};
-
-					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
-						regulator-name = "V-AMIC2";
-					};
-
-					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-name = "V-DMIC";
-					};
-
-					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-name = "V-CSI/DSI";
-					};
-				};
-			};
-		};
-
 		pinctrl {
 			sdi0 {
 				sdi0_default_mode: sdi0_default {
diff --git a/arch/arm/boot/dts/ste-href520-tvk.dts b/arch/arm/boot/dts/st/ste-href520-tvk.dts
index 4201547c5988..5677df43c3ac 100644
--- a/arch/arm/boot/dts/ste-href520-tvk.dts
+++ b/arch/arm/boot/dts/st/ste-href520-tvk.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "ste-db8520.dtsi"
+#include "ste-href-ab8505.dtsi"
 #include "ste-hrefv60plus.dtsi"
 #include "ste-href-tvk1281618-r3.dtsi"
 
@@ -28,7 +29,7 @@
 			  2900000 0x0>;
 
 		gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-		enable-gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts
index dfc933214c1a..b142bb2d38d8 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
+++ b/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefprev60.dtsi"
 #include "ste-href-stuib.dtsi"
 
@@ -27,7 +28,7 @@
 			  2900000 0x0>;
 
 		gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
-		enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts
index 75506339a93c..5da1ff41b00e 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
+++ b/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefprev60.dtsi"
 #include "ste-href-tvk1281618-r2.dtsi"
 
@@ -27,7 +28,7 @@
 			  2900000 0x0>;
 
 		gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
-		enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/st/ste-hrefprev60.dtsi
index 29b67abfc461..c87fd27b4434 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/st/ste-hrefprev60.dtsi
@@ -17,7 +17,7 @@
 
 	soc {
 		/* Enable UART1 on this board */
-		uart@80121000 {
+		serial@80121000 {
 			status = "okay";
 		};
 
@@ -62,7 +62,7 @@
 
 		// External Micro SD slot
 		mmc@80126000 {
-			cd-gpios  = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
+			cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
 		};
 
 		pinctrl {
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts
index 52c56ed17ae6..c4abe24a7cd0 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
+++ b/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefv60plus.dtsi"
 #include "ste-href-stuib.dtsi"
 
@@ -29,7 +30,7 @@
 			  2900000 0x0>;
 
 		gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-		enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts
index 2db2f8be8b03..f55e8de2b516 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
+++ b/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "ste-db8500.dtsi"
+#include "ste-href-ab8500.dtsi"
 #include "ste-hrefv60plus.dtsi"
 #include "ste-href-tvk1281618-r2.dtsi"
 
@@ -29,7 +30,7 @@
 			  2900000 0x0>;
 
 		gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-		enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi
index e66fa59c2de6..b23966c16a32 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi
@@ -3,7 +3,6 @@
  * Copyright 2012 ST-Ericsson AB
  */
 
-#include "ste-href-ab8500.dtsi"
 #include "ste-href.dtsi"
 
 / {
@@ -191,7 +190,7 @@
 
 		// External Micro SD slot
 		mmc@80126000 {
-			cd-gpios  = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
+			cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
 		};
 
 		pinctrl {
diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/st/ste-nomadik-nhk15.dts
index 8142c017882c..cdff33063d6f 100644
--- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts
+++ b/arch/arm/boot/dts/st/ste-nomadik-nhk15.dts
@@ -99,17 +99,16 @@
 			pinctrl-names = "default";
 			reg = <0x1d>;
 		};
-		stmpe0: stmpe2401@43 {
+		stmpe0: port-expander@43 {
 			compatible = "st,stmpe2401";
 			reg = <0x43>;
 			reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; // GPIO77
 			interrupts = <12 IRQ_TYPE_EDGE_FALLING>; // GPIO76
 			interrupt-parent = <&gpio2>;
-			interrupt-controller;
 			wakeup-source;
 			pinctrl-names = "default";
 			pinctrl-0 = <&stmpe2401_1_nhk_mode>;
-			stmpe_gpio43: stmpe_gpio {
+			stmpe_gpio43: gpio {
 				compatible = "st,stmpe-gpio";
 				gpio-controller;
 				#gpio-cells = <2>;
@@ -118,7 +117,7 @@
 				/* Some pins in alternate functions */
 				st,norequest-mask = <0xf0f002>;
 			};
-			stmpe_keypad {
+			keyboard-controller {
 				compatible = "st,stmpe-keypad";
 				debounce-interval = <64>;
 				st,scan-count = <8>;
@@ -140,22 +139,21 @@
 						0x03020067 // Up
 						0x0303006c>; // Down
 			};
-			stmpe0_pwm: stmpe_pwm {
+			stmpe0_pwm: pwm {
 				compatible = "st,stmpe-pwm";
 				#pwm-cells = <2>;
 			};
 		};
-		stmpe1: stmpe2401@44 {
+		stmpe1: port-expander@44 {
 			compatible = "st,stmpe2401";
 			reg = <0x44>;
 			reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; // GPIO79
 			interrupts = <14 IRQ_TYPE_EDGE_FALLING>; // GPIO78
 			interrupt-parent = <&gpio2>;
-			interrupt-controller;
 			wakeup-source;
 			pinctrl-names = "default";
 			pinctrl-0 = <&stmpe2401_2_nhk_mode>;
-			stmpe_gpio44: stmpe_gpio {
+			stmpe_gpio44: gpio {
 				compatible = "st,stmpe-gpio";
 				gpio-controller;
 				#gpio-cells = <2>;
@@ -165,7 +163,7 @@
 				 * This will turn off SATA so that MMC/SD
 				 * can thrive
 				 */
-				mmcsd-gpio {
+				mmcsd-hog {
 					gpio-hog;
 					gpios = <2 0x0>;
 					output-low;
@@ -190,7 +188,7 @@
 		};
 
 		/* Activate RX/TX and CTS/RTS on UART 0 */
-		uart0: uart@101fd000 {
+		uart0: serial@101fd000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_nhk_mode>;
 			status = "okay";
@@ -210,8 +208,8 @@
 		 * As we're dealing with 3wire SPI, we only define SCK
 		 * and MOSI (in the spec MOSI is called "SDA").
 		 */
-		gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
 		cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 
diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/st/ste-nomadik-pinctrl.dtsi
index bfdb5d9a014f..bfdb5d9a014f 100644
--- a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/ste-nomadik-pinctrl.dtsi
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/st/ste-nomadik-s8815.dts
index f16314ffbf4b..7c7a53604204 100644
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/st/ste-nomadik-s8815.dts
@@ -23,7 +23,7 @@
 
 	gpio3: gpio@101e7000 {
 		/* This hog will bias the MMC/SD card detect line */
-		mmcsd-gpio {
+		mmcsd-hog {
 			gpio-hog;
 			gpios = <16 0x0>;
 			output-low;
@@ -117,8 +117,8 @@
 	/* GPIO I2C connected to the USB portions of the STw4811 only */
 	gpio-i2c {
 		compatible = "i2c-gpio";
-		gpios = <&gpio2 10 0>, /* sda */
-			<&gpio2 9 0>; /* scl */
+		sda-gpios = <&gpio2 10 0>;
+		scl-gpios = <&gpio2 9 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		pinctrl-names = "default";
@@ -133,7 +133,7 @@
 
 	amba {
 		/* Activate RXTX on UART 0 */
-		uart0: uart@101fd000 {
+		uart0: serial@101fd000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_s8815_mode>;
 			status = "okay";
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi
index 1815361fe73c..4d37c5fb553c 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi
@@ -52,7 +52,7 @@
 
 	gpio0: gpio@101e4000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e4000 0x80>;
+		reg = <0x101e4000 0x80>;
 		interrupt-parent = <&vica>;
 		interrupts = <6>;
 		interrupt-controller;
@@ -66,7 +66,7 @@
 
 	gpio1: gpio@101e5000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e5000 0x80>;
+		reg = <0x101e5000 0x80>;
 		interrupt-parent = <&vica>;
 		interrupts = <7>;
 		interrupt-controller;
@@ -80,7 +80,7 @@
 
 	gpio2: gpio@101e6000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e6000 0x80>;
+		reg = <0x101e6000 0x80>;
 		interrupt-parent = <&vica>;
 		interrupts = <8>;
 		interrupt-controller;
@@ -94,7 +94,7 @@
 
 	gpio3: gpio@101e7000 {
 		compatible = "st,nomadik-gpio";
-		reg =  <0x101e7000 0x80>;
+		reg = <0x101e7000 0x80>;
 		ngpio = <28>;
 		interrupt-parent = <&vica>;
 		interrupts = <9>;
@@ -769,7 +769,7 @@
 			reg = <0x10140020 0x20>;
 		};
 
-		uart0: uart@101fd000 {
+		uart0: serial@101fd000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101fd000 0x1000>;
 			interrupt-parent = <&vica>;
@@ -782,7 +782,7 @@
 			dma-names = "rx", "tx";
 		};
 
-		uart1: uart@101fb000 {
+		uart1: serial@101fb000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101fb000 0x1000>;
 			interrupt-parent = <&vica>;
@@ -796,7 +796,7 @@
 			dma-names = "rx", "tx";
 		};
 
-		uart2: uart@101f2000 {
+		uart2: serial@101f2000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101f2000 0x1000>;
 			interrupt-parent = <&vica>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/st/ste-snowball.dts
index 1c9094f24893..1322abfc7acf 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/st/ste-snowball.dts
@@ -28,6 +28,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
@@ -221,7 +229,7 @@
 			/* GPIO228 SD_SEL */
 			gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
 			/* GPIO217 MMC_EN */
-			enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>;
+			enable-gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 
 			regulator-min-microvolt = <1800000>;
@@ -258,7 +266,7 @@
 			pinctrl-1 = <&mc0_a_1_sleep>;
 
 			/* GPIO218 MMC_CD */
-			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>;
+			cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
 
 			status = "okay";
 		};
@@ -300,7 +308,7 @@
 			status = "okay";
 		};
 
-		uart@80120000 {
+		serial@80120000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u0_a_1_default>;
 			pinctrl-1 = <&u0_a_1_sleep>;
@@ -308,13 +316,13 @@
 		};
 
 		/* This UART is unused and thus left disabled */
-		uart@80121000 {
+		serial@80121000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u1rxtx_a_1_default>;
 			pinctrl-1 = <&u1rxtx_a_1_sleep>;
 		};
 
-		uart@80007000 {
+		serial@80007000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u2rxtx_c_1_default>;
 			pinctrl-1 = <&u2rxtx_c_1_sleep>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
index d6940e0afa86..8f1780d560ff 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
@@ -44,6 +44,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
@@ -239,7 +247,7 @@
 		};
 	};
 
-	spi-gpio-0 {
+	spi {
 		compatible = "spi-gpio";
 		/* Clock on GPIO220, pin SCL */
 		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
@@ -302,7 +310,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
@@ -361,7 +369,7 @@
 		};
 
 		/* GBF (Bluetooth) UART */
-		uart@80120000 {
+		serial@80120000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u0_a_1_default>;
 			pinctrl-1 = <&u0_a_1_sleep>;
@@ -375,8 +383,9 @@
 				/* BT_WAKE on GPIO199 */
 				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 				/* BT_HOST_WAKE on GPIO97 */
-				/* FIXME: convert to interrupt */
-				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				interrupt-parent = <&gpio3>;
+				interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "host-wakeup";
 				/* BT_RST_N on GPIO209 */
 				reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
 				pinctrl-names = "default";
@@ -385,7 +394,7 @@
 		};
 
 		/* GPS UART */
-		uart@80121000 {
+		serial@80121000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			/* CTS/RTS is not used, CTS is repurposed as GPIO */
@@ -395,7 +404,7 @@
 		};
 
 		/* Debugging console UART connected to AB8505 */
-		uart@80007000 {
+		serial@80007000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u2rxtx_c_1_default>;
@@ -536,6 +545,7 @@
 				touchscreen-size-y = <800>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&tsp_default>;
+				linux,keycodes = <KEY_MENU>, <KEY_BACK>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
index 5f41256d7f4b..9f58a3c2d06d 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
@@ -57,6 +57,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
@@ -325,7 +333,7 @@
 		};
 	};
 
-	spi-gpio-0 {
+	spi {
 		compatible = "spi-gpio";
 		/* Clock on GPIO220, pin SCL */
 		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
@@ -394,7 +402,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
@@ -443,18 +451,22 @@
 			no-sdio;
 			no-sd;
 			vmmc-supply = <&ldo_3v3_reg>;
+			vqmmc-supply = <&db8500_vsmps2_reg>;
 			pinctrl-names = "default", "sleep";
 			/*
-			 * GPIO130 will be set to input no pull-up resulting in a resistor
-			 * pulling the reset high and taking the memory out of reset.
+			 * This muxing excludes the feedback clock on GPIO130
+			 * which is instead used for reset of the eMMC.
+			 * GPIO130 will be set to input no pull-up resulting in
+			 * a resistor pulling the reset high and taking the
+			 * memory out of reset.
 			 */
-			pinctrl-0 = <&mc2_a_1_default>;
-			pinctrl-1 = <&mc2_a_1_sleep>;
+			pinctrl-0 = <&mc2_a_2_default>;
+			pinctrl-1 = <&mc2_a_2_sleep>;
 			status = "okay";
 		};
 
 		/* GBF (Bluetooth) UART */
-		uart@80120000 {
+		serial@80120000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u0_a_1_default>;
 			pinctrl-1 = <&u0_a_1_sleep>;
@@ -467,8 +479,9 @@
 				/* BT_WAKE on GPIO199 */
 				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 				/* BT_HOST_WAKE on GPIO97 */
-				/* FIXME: convert to interrupt */
-				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				interrupt-parent = <&gpio3>;
+				interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "host-wakeup";
 				/* BT_RST_N on GPIO209 */
 				reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
 				pinctrl-names = "default";
@@ -477,7 +490,7 @@
 		};
 
 		/* GPS UART */
-		uart@80121000 {
+		serial@80121000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
@@ -497,7 +510,7 @@
 		};
 
 		/* Debugging console UART connected to TSU6111RSVR (FSA880) */
-		uart@80007000 {
+		serial@80007000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u2rxtx_c_1_default>;
@@ -636,6 +649,7 @@
 				touchscreen-size-y = <800>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&tsp_default>;
+				linux,keycodes = <KEY_MENU>, <KEY_BACK>;
 			};
 		};
 
@@ -669,14 +683,14 @@
 	sdi2 {
 		/*
 		 * This will make the resistor mounted in R0.0 pull up
-		 * the reset line and take the eMMC out of reset. On
-		 * R0.4 variants, GPIO130 should be set in GPIO mode and
-		 * pulled down. (Not connected.)
+		 * the reset line and take the eMMC out of reset so set to
+		 * GPIO input mode, no pull-up. On R0.4 variants, GPIO130
+		 * could be set in GPIO mode and pulled down. (Not connected.)
 		 */
-		mc2_a_1_default {
-			default_cfg2 {
-				pins = "GPIO130_C8"; /* FBCLK */
-				ste,config = <&in_nopull>;
+		mc2_a_2_default {
+			default_cfg3 {
+				pins = "GPIO130_C8"; /* RST_N */
+				ste,config = <&gpio_in_nopull>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts
index 806da3fc33cd..ad9a20ccaaeb 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts
@@ -30,6 +30,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
@@ -269,7 +277,7 @@
 	/*
 	 * TODO: See if we can use the PL023 for this instead.
 	 */
-	spi-gpio-0 {
+	spi {
 		compatible = "spi-gpio";
 		/* Clock on GPIO220, pin SCL */
 		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
@@ -354,7 +362,7 @@
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
 			/* "flash detect" actually card detect */
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>;
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>;
 			status = "okay";
 		};
 
@@ -409,7 +417,7 @@
 		};
 
 		/* GBF (Bluetooth) UART */
-		uart@80120000 {
+		serial@80120000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u0_a_1_default>;
 			pinctrl-1 = <&u0_a_1_sleep>;
@@ -431,7 +439,7 @@
 		};
 
 		/* GPS UART */
-		uart@80121000 {
+		serial@80121000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			/* CTS/RTS is not used, CTS is repurposed as GPIO */
@@ -441,7 +449,7 @@
 		};
 
 		/* Debugging console UART connected to TSU6111RSVR (FSA880) */
-		uart@80007000 {
+		serial@80007000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u2rxtx_c_1_default>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-golden.dts
index b0dce91aff4b..f736888474e7 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-golden.dts
@@ -35,6 +35,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
@@ -178,7 +186,7 @@
 		};
 
 		/* BT UART */
-		uart@80120000 {
+		serial@80120000 {
 			status = "okay";
 
 			pinctrl-names = "default", "sleep";
@@ -201,7 +209,7 @@
 		};
 
 		/* GPF UART */
-		uart@80121000 {
+		serial@80121000 {
 			status = "okay";
 
 			pinctrl-names = "default", "sleep";
@@ -210,7 +218,7 @@
 		};
 
 		/* Debugging console UART */
-		uart@80007000 {
+		serial@80007000 {
 			status = "okay";
 
 			pinctrl-names = "default", "sleep";
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
index ed5c79c3d04b..64562a3a262c 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
@@ -30,6 +30,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
@@ -263,7 +271,7 @@
 	 * this derivative is 3wire support, so it cannot be used to drive
 	 * this panel interface. We have to use GPIO bit-banging instead.
 	 */
-	spi-gpio-0 {
+	spi {
 		compatible = "spi-gpio";
 		/* Clock on GPIO220 */
 		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
@@ -365,9 +373,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		nfc@30 {
-			compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
-			reg = <0x30>;
+		/* This is only mounted on the GT-I9070P */
+		nfc@2b { /* 0x30? */
+			/* NXP NFC circuit PN544 C1 marked NXP 44501  */
+			compatible = "nxp,pn544-i2c";
+			/* IF0, IF1 high, gives I2C address 0x2B */
+			reg = <0x2b>;
+			clock-frequency = <400000>;
 			/* NFC IRQ on GPIO32 */
 			interrupt-parent = <&gpio1>;
 			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
@@ -376,7 +388,7 @@
 			/* GPIO88 */
 			enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&pn547_janice_default>;
+			pinctrl-0 = <&pn544_janice_default>;
 		};
 	};
 
@@ -400,7 +412,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_2_default>;
 			pinctrl-1 = <&mc0_a_2_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
@@ -455,7 +467,7 @@
 		};
 
 		/* GBF (Bluetooth) UART */
-		uart@80120000 {
+		serial@80120000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u0_a_1_default>;
 			pinctrl-1 = <&u0_a_1_sleep>;
@@ -469,8 +481,9 @@
 				/* BT_WAKE on GPIO199 */
 				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 				/* BT_HOST_WAKE on GPIO97 */
-				/* FIXME: convert to interrupt */
-				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				interrupt-parent = <&gpio3>;
+				interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "host-wakeup";
 				/* BT_RST_N on GPIO209 */
 				reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
 				pinctrl-names = "default";
@@ -479,7 +492,7 @@
 		};
 
 		/* GPS UART */
-		uart@80121000 {
+		serial@80121000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			/* CTS/RTS is not used, CTS is repurposed as GPIO */
@@ -508,7 +521,7 @@
 		};
 
 		/* Debugging console UART connected to TSU6111RSVR (FSA880) */
-		uart@80007000 {
+		serial@80007000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u2rxtx_c_1_default>;
@@ -951,7 +964,7 @@
 		};
 	};
 	nfc {
-		pn547_janice_default: pn547_janice {
+		pn544_janice_default: pn544_janice {
 			/* Interrupt line */
 			janice_cfg1 {
 				pins = "GPIO32_V2";
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts
index c57676faf181..cdb147dcc1db 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts
@@ -34,6 +34,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
@@ -230,7 +238,7 @@
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc0_a_1_default>;
 			pinctrl-1 = <&mc0_a_1_sleep>;
-			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
 			status = "okay";
 		};
 
@@ -284,7 +292,7 @@
 		};
 
 		/* GBF (Bluetooth) UART */
-		uart@80120000 {
+		serial@80120000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u0_a_1_default>;
 			pinctrl-1 = <&u0_a_1_sleep>;
@@ -302,15 +310,30 @@
 		};
 
 		/* GPF UART */
-		uart@80121000 {
+		serial@80121000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
 			pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+
+			gnss {
+				/* The CSRG05TA03-ICJE-R is a SirfStarV 5t chip */
+				compatible = "csr,csrg05ta03-icje-r";
+				/* GPS_RSTN on GPIO21 */
+				reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+				/* GPS_ON_OFF on GPIO86 */
+				sirf,onoff-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+				/* GPS_1V8 (VSMPS2) */
+				vcc-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&g05ta03_kyle_default>;
+				/* According to /etc/sirfgps.conf */
+				current-speed = <460800>;
+			};
 		};
 
 		/* Debugging console UART connected to AB8505 USB */
-		uart@80007000 {
+		serial@80007000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u2rxtx_c_1_default>;
@@ -666,6 +689,20 @@
 			};
 		};
 	};
+	g05ta03 {
+		g05ta03_kyle_default: g05ta03 {
+			/* Reset line, start out de-asserted */
+			kyle_cfg1 {
+				pins = "GPIO21_AB3";
+				ste,config = <&gpio_out_hi>;
+			};
+			/* GPS_ON_OFF, start out deasserted (off) */
+			kyle_cfg2 {
+				pins = "GPIO86_C6";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
 };
 
 &ab8505_gpio {
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-skomer.dts
index 81b341a5ae45..064d6fee8821 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-skomer.dts
@@ -30,6 +30,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
@@ -263,7 +271,7 @@
 		};
 
 		/* GBF (Bluetooth) UART */
-		uart@80120000 {
+		serial@80120000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u0_a_1_default>;
 			pinctrl-1 = <&u0_a_1_sleep>;
@@ -282,7 +290,7 @@
 		};
 
 		/* GPS UART */
-		uart@80121000 {
+		serial@80121000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
@@ -305,7 +313,7 @@
 		};
 
 		/* Debugging console UART connected to AB8505 USB */
-		uart@80007000 {
+		serial@80007000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u2rxtx_c_1_default>;
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/st/stih407-family.dtsi
index 5ebb77947fd9..3e6a0542e3ae 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/st/stih407-family.dtsi
@@ -33,7 +33,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
@@ -52,8 +52,9 @@
 			clock-latency = <100000>;
 			cpu0-supply = <&pwm_regulator>;
 			st,syscfg = <&syscfg_core 0x8e0>;
+			#cooling-cells = <2>;
 		};
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
@@ -66,6 +67,7 @@
 					    1200000 0
 					    800000  0
 					    500000  0>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -111,7 +113,6 @@
 		regulator-min-microvolt = <784000>;
 		regulator-max-microvolt = <1299000>;
 		regulator-always-on;
-		max-duty-cycle = <255>;
 		status = "okay";
 	};
 
@@ -645,7 +646,7 @@
 			st,lpc-mode = <ST_LPC_MODE_CLKSRC>;
 		};
 
-		spifsm: spifsm@9022000{
+		spifsm: spifsm@9022000 {
 			compatible = "st,spi-fsm";
 			reg = <0x9022000 0x1000>;
 			reg-names = "spi-fsm";
@@ -668,7 +669,7 @@
 			interrupt-names = "hostc";
 
 			phys = <&phy_port0 PHY_TYPE_SATA>;
-			phy-names = "ahci_phy";
+			phy-names = "sata-phy";
 
 			resets = <&powerdown STIH407_SATA0_POWERDOWN>,
 				 <&softreset STIH407_SATA0_SOFTRESET>,
@@ -691,7 +692,7 @@
 			interrupt-names = "hostc";
 
 			phys = <&phy_port1 PHY_TYPE_SATA>;
-			phy-names = "ahci_phy";
+			phy-names = "sata-phy";
 
 			resets = <&powerdown STIH407_SATA1_POWERDOWN>,
 				 <&softreset STIH407_SATA1_SOFTRESET>,
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/st/stih407-pinctrl.dtsi
index 2cf335714ca2..dcb821f567fa 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stih407-pinctrl.dtsi
@@ -462,14 +462,14 @@
 			serial0 {
 				pinctrl_serial0: serial0-0 {
 					st,pins {
-						tx =  <&pio17 0 ALT1 OUT>;
-						rx =  <&pio17 1 ALT1 IN>;
+						tx = <&pio17 0 ALT1 OUT>;
+						rx = <&pio17 1 ALT1 IN>;
 					};
 				};
 				pinctrl_serial0_hw_flowctrl: serial0-0_hw_flowctrl {
 					st,pins {
-						tx =  <&pio17 0 ALT1 OUT>;
-						rx =  <&pio17 1 ALT1 IN>;
+						tx = <&pio17 0 ALT1 OUT>;
+						rx = <&pio17 1 ALT1 IN>;
 						cts = <&pio17 2 ALT1 IN>;
 						rts = <&pio17 3 ALT1 OUT>;
 					};
@@ -1090,7 +1090,7 @@
 			};
 
 			i2s_out {
-				pinctrl_i2s_8ch_out: i2s_8ch_out{
+				pinctrl_i2s_8ch_out: i2s_8ch_out {
 					st,pins {
 						mclk = <&pio33 5 ALT1 OUT>;
 						lrclk = <&pio33 7 ALT1 OUT>;
@@ -1102,7 +1102,7 @@
 					};
 				};
 
-				pinctrl_i2s_2ch_out: i2s_2ch_out{
+				pinctrl_i2s_2ch_out: i2s_2ch_out {
 					st,pins {
 						mclk = <&pio33 5 ALT1 OUT>;
 						lrclk = <&pio33 7 ALT1 OUT>;
@@ -1113,7 +1113,7 @@
 			};
 
 			i2s_in {
-				pinctrl_i2s_8ch_in: i2s_8ch_in{
+				pinctrl_i2s_8ch_in: i2s_8ch_in {
 					st,pins {
 						mclk = <&pio32 5 ALT1 IN>;
 						lrclk = <&pio32 7 ALT1 IN>;
@@ -1126,7 +1126,7 @@
 					};
 				};
 
-				pinctrl_i2s_2ch_in: i2s_2ch_in{
+				pinctrl_i2s_2ch_in: i2s_2ch_in {
 					st,pins {
 						mclk = <&pio32 5 ALT1 IN>;
 						lrclk = <&pio32 7 ALT1 IN>;
@@ -1137,7 +1137,7 @@
 			};
 
 			spdif_out {
-				pinctrl_spdif_out: spdif_out{
+				pinctrl_spdif_out: spdif_out {
 					st,pins {
 						spdif_out = <&pio34 7 ALT1 OUT>;
 					};
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/st/stih410-b2260.dts
index 26d93f26f6d0..736b1e059b0a 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/st/stih410-b2260.dts
@@ -27,26 +27,26 @@
 
 	leds {
 		compatible = "gpio-leds";
-		user_green_1 {
+		led-user-green-1 {
 			label = "User_green_1";
 			gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		user_green_2 {
+		led-user-green-2 {
 			label = "User_green_2";
 			gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		user_green_3 {
+		led-user-green-3 {
 			label = "User_green_3";
 			gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		user_green_4 {
+		led-user-green-4 {
 			label = "User_green_4";
 			gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
 			default-state = "off";
@@ -206,5 +206,9 @@
 		sata1: sata@9b28000 {
 			status = "okay";
 		};
+
+		gpu: gpu@9f00000 {
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/st/stih410-clock.dtsi
index abac98a1810b..abac98a1810b 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/st/stih410-clock.dtsi
diff --git a/arch/arm/boot/dts/stih410-pinctrl.dtsi b/arch/arm/boot/dts/st/stih410-pinctrl.dtsi
index e6eadd124416..e6eadd124416 100644
--- a/arch/arm/boot/dts/stih410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stih410-pinctrl.dtsi
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/st/stih410.dtsi
index a39dd5f7bcae..d56343f44fda 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/st/stih410.dtsi
@@ -270,9 +270,10 @@
 			clock-names = "thermal";
 			clocks = <&clk_sysin>;
 			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
 		};
 
-		sti-cec@94a087c {
+		cec@94a087c {
 			compatible = "st,stih-cec";
 			reg = <0x94a087c 0x64>;
 			clocks = <&clk_sysin>;
@@ -284,5 +285,39 @@
 			resets = <&softreset STIH407_LPM_SOFTRESET>;
 			hdmi-phandle = <&sti_hdmi>;
 		};
+
+		gpu: gpu@9f00000 {
+			compatible = "st,stih410-mali", "arm,mali-400";
+			reg = <0x9f00000 0x10000>;
+			/* LIMA driver needs 2 clocks, use the same for both */
+			clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>,
+				 <&clk_s_c0_flexgen CLK_ICN_GPU>;
+			clock-names = "bus", "core";
+			assigned-clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>;
+			assigned-clock-rates = <400000000>;
+			resets = <&softreset STIH407_GPU_SOFTRESET>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pp2",
+					  "ppmmu2",
+					  "pp3",
+					  "ppmmu3";
+
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/st/stih418-b2199.dts
index d21bcc7c1271..53ac6c2b7b7d 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/st/stih418-b2199.dts
@@ -26,12 +26,12 @@
 
 	leds {
 		compatible = "gpio-leds";
-		red {
+		led-red {
 			label = "Front Panel LED";
 			gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
-		green {
+		led-green {
 			gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
diff --git a/arch/arm/boot/dts/stih418-b2264.dts b/arch/arm/boot/dts/st/stih418-b2264.dts
index a99604bebf8c..fdc16e9f5822 100644
--- a/arch/arm/boot/dts/stih418-b2264.dts
+++ b/arch/arm/boot/dts/st/stih418-b2264.dts
@@ -42,7 +42,7 @@
 		};
 	};
 
-	cpu_opp_table: opp_table {
+	cpu_opp_table: opp-table {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -69,19 +69,19 @@
 	};
 
 	aliases {
-		ttyAS0 = &sbc_serial0;
+		serial0 = &sbc_serial0;
 		ethernet0 = &ethernet0;
 	};
 
-	soc {
-		leds {
-			compatible = "gpio-leds";
-			green {
-				gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
+	leds {
+		compatible = "gpio-leds";
+		led-green {
+			gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
 		};
+	};
 
+	soc {
 		pin-controller-sbc@961f080 {
 			gmac1 {
 				rgmii1-0 {
diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/st/stih418-clock.dtsi
index e1749e92a2e7..e1749e92a2e7 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/st/stih418-clock.dtsi
diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/st/stih418.dtsi
index b35b9b7a7ccc..8fb8b3af5e49 100644
--- a/arch/arm/boot/dts/stih418.dtsi
+++ b/arch/arm/boot/dts/st/stih418.dtsi
@@ -6,23 +6,26 @@
 #include "stih418-clock.dtsi"
 #include "stih407-family.dtsi"
 #include "stih410-pinctrl.dtsi"
+#include <dt-bindings/thermal/thermal.h>
 / {
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <2>;
 			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
 			cpu-release-addr = <0x94100A4>;
+			#cooling-cells = <2>;
 		};
-		cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <3>;
 			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
 			cpu-release-addr = <0x94100A4>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -44,6 +47,38 @@
 		reset-names = "global", "port";
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;  /* 250ms */
+			polling-delay = <1000>;         /* 1000ms */
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu_crit: cpu-crit {
+					temperature = <95000>;  /* 95C */
+					hysteresis = <2000>;
+					type = "critical";
+				};
+				cpu_alert: cpu-alert {
+					temperature = <85000>;  /* 85C */
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	soc {
 		rng11: rng@8a8a000 {
 			status = "disabled";
@@ -107,12 +142,13 @@
 			assigned-clock-rates = <200000000>;
 		};
 
-		thermal@91a0000 {
+		thermal: thermal@91a0000 {
 			compatible = "st,stih407-thermal";
 			reg = <0x91a0000 0x28>;
 			clock-names = "thermal";
 			clocks = <&clk_sysin>;
 			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/st/stm32429i-eval.dts
index 3de0e9dbe030..afa417b34b25 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/st/stm32429i-eval.dts
@@ -50,6 +50,7 @@
 #include "stm32f429-pinctrl.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
 
 / {
 	model = "STMicroelectronics STM32429i-EVAL board";
@@ -186,7 +187,7 @@
 	port {
 		dcmi_0: endpoint {
 			remote-endpoint = <&ov2640_0>;
-			bus-type = <5>;
+			bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
 			bus-width = <8>;
 			hsync-active = <0>;
 			vsync-active = <0>;
@@ -221,7 +222,6 @@
 		reg = <0x42>;
 		interrupts = <8 3>;
 		interrupt-parent = <&gpioi>;
-		interrupt-controller;
 		wakeup-source;
 
 		stmpegpio: stmpe_gpio {
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/st/stm32746g-eval.dts
index a293e65141c6..e9ac37b6eca0 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/st/stm32746g-eval.dts
@@ -188,9 +188,10 @@
 	status = "okay";
 	vmmc-supply = <&mmc_vcard>;
 	broken-cd;
-	pinctrl-names = "default", "opendrain";
+	pinctrl-names = "default", "opendrain", "sleep";
 	pinctrl-0 = <&sdio_pins_a>;
 	pinctrl-1 = <&sdio_pins_od_a>;
+	pinctrl-2 = <&sdio_pins_sleep_a>;
 	bus-width = <4>;
 };
 
diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32f4-pinctrl.dtsi
index 500bcc302d42..3bb812d6399e 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32f4-pinctrl.dtsi
@@ -51,7 +51,6 @@
 			ranges = <0 0x40020000 0x3000>;
 			interrupt-parent = <&exti>;
 			st,syscfg = <&syscfg 0x8>;
-			pins-are-numbered;
 
 			gpioa: gpio@40020000 {
 				gpio-controller;
@@ -448,6 +447,36 @@
 					slew-rate = <2>;
 				};
 			};
+
+			can1_pins_a: can1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can2_pins_a: can2-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can2_pins_b: can2-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/st/stm32f429-disco.dts
index 3b81228d46a2..a3cb4aabdd5a 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/st/stm32f429-disco.dts
@@ -190,7 +190,7 @@
 		status = "okay";
 	};
 
-	display: display@1{
+	display: display@1 {
 		/* Connect panel-ilitek-9341 to ltdc */
 		compatible = "st,sf-tc240t-9370-t", "ilitek,ili9341";
 		reg = <1>;
diff --git a/arch/arm/boot/dts/stm32f429-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32f429-pinctrl.dtsi
index e10d7a1f3207..e10d7a1f3207 100644
--- a/arch/arm/boot/dts/stm32f429-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32f429-pinctrl.dtsi
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/st/stm32f429.dtsi
index c31ceb821231..ad91b74ddd0d 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/st/stm32f429.dtsi
@@ -45,7 +45,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "armv7-m.dtsi"
+#include "../armv7-m.dtsi"
 #include <dt-bindings/clock/stm32fx-clock.h>
 #include <dt-bindings/mfd/stm32f4-rcc.h>
 
@@ -362,6 +362,36 @@
 			status = "disabled";
 		};
 
+		can1: can@40006400 {
+			compatible = "st,stm32f4-bxcan";
+			reg = <0x40006400 0x200>;
+			interrupts = <19>, <20>, <21>, <22>;
+			interrupt-names = "tx", "rx0", "rx1", "sce";
+			resets = <&rcc STM32F4_APB1_RESET(CAN1)>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN1)>;
+			st,can-primary;
+			st,gcan = <&gcan>;
+			status = "disabled";
+		};
+
+		gcan: gcan@40006600 {
+			compatible = "st,stm32f4-gcan", "syscon";
+			reg = <0x40006600 0x200>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN1)>;
+		};
+
+		can2: can@40006800 {
+			compatible = "st,stm32f4-bxcan";
+			reg = <0x40006800 0x200>;
+			interrupts = <63>, <64>, <65>, <66>;
+			interrupt-names = "tx", "rx0", "rx1", "sce";
+			resets = <&rcc STM32F4_APB1_RESET(CAN2)>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN2)>;
+			st,can-secondary;
+			st,gcan = <&gcan>;
+			status = "disabled";
+		};
+
 		dac: dac@40007400 {
 			compatible = "st,stm32f4-dac-core";
 			reg = <0x40007400 0x400>;
@@ -549,6 +579,7 @@
 		syscfg: syscon@40013800 {
 			compatible = "st,stm32-syscfg", "syscon";
 			reg = <0x40013800 0x400>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(SYSCFG)>;
 		};
 
 		exti: interrupt-controller@40013c00 {
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/st/stm32f469-disco.dts
index 5a0daf8e8b11..8a4f8ddd083d 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/st/stm32f469-disco.dts
@@ -69,16 +69,9 @@
 		serial0 = &usart3;
 	};
 
-	mmc_vcard: mmc_vcard {
+	vcc_3v3: vcc-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "mmc_vcard";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	vdd_dsi: vdd-dsi {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_dsi";
+		regulator-name = "vcc_3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
@@ -160,11 +153,11 @@
 		};
 	};
 
-	panel-dsi@0 {
+	panel@0 {
 		compatible = "orisetech,otm8009a";
 		reg = <0>; /* dsi virtual channel (0..3) */
 		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
-		power-supply = <&vdd_dsi>;
+		power-supply = <&vcc_3v3>;
 		status = "okay";
 
 		port {
@@ -179,7 +172,7 @@
 	status = "okay";
 
 	port {
-		ltdc_out_dsi: endpoint@0 {
+		ltdc_out_dsi: endpoint {
 			remote-endpoint = <&dsi_in>;
 		};
 	};
@@ -219,7 +212,7 @@
 
 &sdio {
 	status = "okay";
-	vmmc-supply = <&mmc_vcard>;
+	vmmc-supply = <&vcc_3v3>;
 	cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
 	broken-cd;
 	pinctrl-names = "default", "opendrain";
diff --git a/arch/arm/boot/dts/stm32f469-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32f469-pinctrl.dtsi
index 6bf60263dff8..6bf60263dff8 100644
--- a/arch/arm/boot/dts/stm32f469-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32f469-pinctrl.dtsi
diff --git a/arch/arm/boot/dts/stm32f469.dtsi b/arch/arm/boot/dts/st/stm32f469.dtsi
index be002e8a78ac..be002e8a78ac 100644
--- a/arch/arm/boot/dts/stm32f469.dtsi
+++ b/arch/arm/boot/dts/st/stm32f469.dtsi
diff --git a/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi
new file mode 100644
index 000000000000..97fc3fb5a9ca
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi
@@ -0,0 +1,436 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Alexandre Torgue  <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+#include <dt-bindings/mfd/stm32f7-rcc.h>
+
+/ {
+	soc {
+		pinctrl: pinctrl@40020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x40020000 0x3000>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&syscfg 0x8>;
+
+			gpioa: gpio@40020000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>;
+				st,bank-name = "GPIOA";
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x400 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>;
+				st,bank-name = "GPIOB";
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x800 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>;
+				st,bank-name = "GPIOC";
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xc00 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>;
+				st,bank-name = "GPIOD";
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>;
+				st,bank-name = "GPIOE";
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1400 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>;
+				st,bank-name = "GPIOF";
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1800 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>;
+				st,bank-name = "GPIOG";
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1c00 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>;
+				st,bank-name = "GPIOH";
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>;
+				st,bank-name = "GPIOI";
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2400 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>;
+				st,bank-name = "GPIOJ";
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2800 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>;
+				st,bank-name = "GPIOK";
+			};
+
+			cec_pins_a: cec-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */
+					slew-rate = <0>;
+					drive-open-drain;
+					bias-disable;
+				};
+			};
+
+			usart1_pins_a: usart1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
+					bias-disable;
+				};
+			};
+
+			usart1_pins_b: usart1-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 7, AF7)>; /* USART1_RX */
+					bias-disable;
+				};
+			};
+
+			i2c1_pins_b: i2c1-0 {
+				pins {
+					pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */
+						 <STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <0>;
+				};
+			};
+
+			i2c3_pins_a: i2c3-0 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 8, AF4)>, /* I2C3_SDA */
+						 <STM32_PINMUX('H', 7, AF4)>; /* I2C3_SCL */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <0>;
+				};
+			};
+
+			usbotg_hs_pins_a: usbotg-hs-0 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
+						 <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
+						 <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
+						 <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
+						 <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
+						 <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
+						 <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
+						 <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
+						 <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
+						 <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
+						 <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
+						 <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_hs_pins_b: usbotg-hs-1 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
+						 <STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */
+						 <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
+						 <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
+						 <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
+						 <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
+						 <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
+						 <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
+						 <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
+						 <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
+						 <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
+						 <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_fs_pins_a: usbotg-fs-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
+						 <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
+						 <STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_a: sdio-pins-a-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1 D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1 D3 */
+						 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1 CLK */
+						 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1 CMD */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_od_a: sdio-pins-od-a-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1 D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1 D3 */
+						 <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1 CLK */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1 CMD */
+					drive-open-drain;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_sleep_a: sdio-pins-sleep-a-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1 D0 */
+						 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1 D1 */
+						 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1 D2 */
+						 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1 D3 */
+						 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1 CLK */
+						 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1 CMD */
+				};
+			};
+
+			sdio_pins_b: sdio-pins-b-0 {
+				pins {
+					pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
+						 <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
+						 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2 D2 */
+						 <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2 D3 */
+						 <STM32_PINMUX('D', 6, AF11)>, /* SDMMC2 CLK */
+						 <STM32_PINMUX('D', 7, AF11)>; /* SDMMC2 CMD */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_od_b: sdio-pins-od-b-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
+						 <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
+						 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2 D2 */
+						 <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2 D3 */
+						 <STM32_PINMUX('D', 6, AF11)>; /* SDMMC2 CLK */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC2 CMD */
+					drive-open-drain;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_sleep_b: sdio-pins-sleep-b-0 {
+				pins {
+					pinmux = <STM32_PINMUX('G', 9, ANALOG)>, /* SDMMC2 D0 */
+						 <STM32_PINMUX('G', 10, ANALOG)>, /* SDMMC2 D1 */
+						 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2 D2 */
+						 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2 D3 */
+						 <STM32_PINMUX('D', 6, ANALOG)>, /* SDMMC2 CLK */
+						 <STM32_PINMUX('D', 7, ANALOG)>; /* SDMMC2 CMD */
+				};
+			};
+
+			can1_pins_a: can1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can1_pins_b: can1-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can1_pins_c: can1-2 {
+				pins1 {
+					pinmux = <STM32_PINMUX('D', 1, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+
+				};
+			};
+
+			can1_pins_d: can1-3 {
+				pins1 {
+					pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+
+				};
+			};
+
+			can2_pins_a: can2-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 6, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can2_pins_b: can2-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can3_pins_a: can3-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 15, AF11)>; /* CAN3_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 8, AF11)>; /* CAN3_RX */
+					bias-pull-up;
+				};
+			};
+
+			can3_pins_b: can3-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 4, AF11)>;  /* CAN3_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 3, AF11)>; /* CAN3_RX */
+					bias-pull-up;
+				};
+			};
+
+			ltdc_pins_a: ltdc-0 {
+				pins {
+					pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */
+						 <STM32_PINMUX('G',12, AF9)>,  /* LCD_B4 */
+						 <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
+						 <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */
+						 <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */
+						 <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */
+						 <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
+						 <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
+						 <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
+						 <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
+						 <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
+						 <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */
+						 <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
+						 <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
+						 <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
+						 <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
+						 <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */
+						 <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */
+						 <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */
+						 <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */
+						 <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */
+						 <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
+						 <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
+						 <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
+						 <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
+						 <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
+						 <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
+						 <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
+					slew-rate = <2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32f746-disco.dts b/arch/arm/boot/dts/st/stm32f746-disco.dts
new file mode 100644
index 000000000000..b57dbdce2f40
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32f746-disco.dts
@@ -0,0 +1,224 @@
+/*
+ * Copyright 2017 - Vikas MANOCHA <vikas.manocha@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f746.dtsi"
+#include "stm32f746-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "STMicroelectronics STM32F746-DISCO board";
+	compatible = "st,stm32f746-disco", "st,stm32f746";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xC0000000 0x800000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			no-map;
+			size = <0x80000>;
+			linux,dma-default;
+		};
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-usr {
+			gpios = <&gpioi 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		button-0 {
+			label = "User";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpioi 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usbotg_hs_phy: usb-phy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>;
+		clock-names = "main_clk";
+	};
+
+	/* This turns on vbus for otg fs for host mode (dwc2) */
+	vcc5v_otg_fs: vcc5v-otg-fs-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpiod 5 0>;
+		regulator-name = "vcc5_host1";
+		regulator-always-on;
+	};
+
+	vcc_3v3: vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiok 3 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	panel_rgb: panel-rgb {
+		compatible = "rocktech,rk043fn48h";
+		power-supply = <&vcc_3v3>;
+		backlight = <&backlight>;
+		enable-gpios = <&gpioi 12 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+		port {
+			panel_in_rgb: endpoint {
+				remote-endpoint = <&ltdc_out_rgb>;
+			};
+		};
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins_b>;
+	pinctrl-names = "default";
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins_a>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5306";
+		reg = <0x38>;
+		interrupt-parent = <&gpioi>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <272>;
+	};
+};
+
+&ltdc {
+	pinctrl-0 = <&ltdc_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	port {
+		ltdc_out_rgb: endpoint {
+			remote-endpoint = <&panel_in_rgb>;
+		};
+	};
+};
+
+&sdio1 {
+	status = "okay";
+	vmmc-supply = <&vcc_3v3>;
+	cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdio_pins_a>;
+	pinctrl-1 = <&sdio_pins_od_a>;
+	pinctrl-2 = <&sdio_pins_sleep_a>;
+	bus-width = <4>;
+};
+
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_b>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_fs {
+	dr_mode = "host";
+	pinctrl-0 = <&usbotg_fs_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "host";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	pinctrl-0 = <&usbotg_hs_pins_b>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/st/stm32f746-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32f746-pinctrl.dtsi
new file mode 100644
index 000000000000..139f72b790c0
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32f746-pinctrl.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Alexandre Torgue  <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32f7-pinctrl.dtsi"
+
+&pinctrl {
+	compatible = "st,stm32f746-pinctrl";
+
+	gpioa: gpio@40020000 {
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@40020400 {
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@40020800 {
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@40020c00 {
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@40021000 {
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@40021400 {
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@40021800 {
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@40021c00 {
+		gpio-ranges = <&pinctrl 0 112 16>;
+	};
+
+	gpioi: gpio@40022000 {
+		gpio-ranges = <&pinctrl 0 128 16>;
+	};
+
+	gpioj: gpio@40022400 {
+		gpio-ranges = <&pinctrl 0 144 16>;
+	};
+
+	gpiok: gpio@40022800 {
+		gpio-ranges = <&pinctrl 0 160 8>;
+	};
+};
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/st/stm32f746.dtsi
index dc868e6da40e..208f8c6dfc9d 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/st/stm32f746.dtsi
@@ -40,9 +40,10 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "armv7-m.dtsi"
+#include "../armv7-m.dtsi"
 #include <dt-bindings/clock/stm32fx-clock.h>
 #include <dt-bindings/mfd/stm32f7-rcc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	#address-cells = <1>;
@@ -245,6 +246,39 @@
 			};
 		};
 
+		lptimer1: timer@40002400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x40002400 0x400>;
+			interrupts-extended = <&exti 23 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&rcc 1 CLK_LPTIMER>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@0 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-lptimer-counter";
+				status = "disabled";
+			};
+
+			timer {
+				compatible = "st,stm32-lptimer-timer";
+				status = "disabled";
+			};
+		};
+
 		rtc: rtc@40002800 {
 			compatible = "st,stm32-rtc";
 			reg = <0x40002800 0x400>;
@@ -257,6 +291,26 @@
 			status = "disabled";
 		};
 
+		spi2: spi@40003800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40003800 0x400>;
+			interrupts = <36>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI2)>;
+			status = "disabled";
+		};
+
+		spi3: spi@40003c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40003c00 0x400>;
+			interrupts = <51>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI3)>;
+			status = "disabled";
+		};
+
 		usart2: serial@40004400 {
 			compatible = "st,stm32f7-uart";
 			reg = <0x40004400 0x400>;
@@ -337,6 +391,36 @@
 			status = "disabled";
 		};
 
+		can1: can@40006400 {
+			compatible = "st,stm32f4-bxcan";
+			reg = <0x40006400 0x200>;
+			interrupts = <19>, <20>, <21>, <22>;
+			interrupt-names = "tx", "rx0", "rx1", "sce";
+			resets = <&rcc STM32F7_APB1_RESET(CAN1)>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN1)>;
+			st,can-primary;
+			st,gcan = <&gcan1>;
+			status = "disabled";
+		};
+
+		gcan1: gcan@40006600 {
+			compatible = "st,stm32f4-gcan", "syscon";
+			reg = <0x40006600 0x200>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN1)>;
+		};
+
+		can2: can@40006800 {
+			compatible = "st,stm32f4-bxcan";
+			reg = <0x40006800 0x200>;
+			interrupts = <63>, <64>, <65>, <66>;
+			interrupt-names = "tx", "rx0", "rx1", "sce";
+			resets = <&rcc STM32F7_APB1_RESET(CAN2)>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN2)>;
+			st,can-secondary;
+			st,gcan = <&gcan1>;
+			status = "disabled";
+		};
+
 		cec: cec@40006c00 {
 			compatible = "st,stm32-cec";
 			reg = <0x40006C00 0x400>;
@@ -444,9 +528,30 @@
 			status = "disabled";
 		};
 
+		spi1: spi@40013000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40013000 0x400>;
+			interrupts = <35>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI1)>;
+			status = "disabled";
+		};
+
+		spi4: spi@40013400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40013400 0x400>;
+			interrupts = <84>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI4)>;
+			status = "disabled";
+		};
+
 		syscfg: syscon@40013800 {
 			compatible = "st,stm32-syscfg", "syscon";
 			reg = <0x40013800 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SYSCFG)>;
 		};
 
 		exti: interrupt-controller@40013c00 {
@@ -507,6 +612,36 @@
 			};
 		};
 
+		spi5: spi@40015000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40015000 0x400>;
+			interrupts = <85>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI5)>;
+			status = "disabled";
+		};
+
+		spi6: spi@40015400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f7-spi";
+			reg = <0x40015400 0x400>;
+			interrupts = <86>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI6)>;
+			status = "disabled";
+		};
+
+		ltdc: display-controller@40016800 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x40016800 0x200>;
+			interrupts = <88>, <89>;
+			resets = <&rcc STM32F7_APB2_RESET(LTDC)>;
+			clocks = <&rcc 1 CLK_LCD>;
+			clock-names = "lcd";
+			status = "disabled";
+		};
+
 		pwrcfg: power-config@40007000 {
 			compatible = "st,stm32-power-config", "syscon";
 			reg = <0x40007000 0x400>;
@@ -515,7 +650,7 @@
 		crc: crc@40023000 {
 			compatible = "st,stm32f7-crc";
 			reg = <0x40023000 0x400>;
-			clocks = <&rcc 0 12>;
+			clocks = <&rcc 0 STM32F7_AHB1_CLOCK(CRC)>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/st/stm32f769-disco-mb1166-reva09.dts b/arch/arm/boot/dts/st/stm32f769-disco-mb1166-reva09.dts
new file mode 100644
index 000000000000..ff7ff32371d0
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32f769-disco-mb1166-reva09.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023 Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ */
+
+#include "stm32f769-disco.dts"
+
+&panel0 {
+	compatible = "frida,frd400b25025", "novatek,nt35510";
+	vddi-supply = <&vcc_3v3>;
+	vdd-supply = <&vcc_3v3>;
+	/delete-property/power-supply;
+};
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/st/stm32f769-disco.dts
index b038d0ed39e8..535cfdc4681c 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/st/stm32f769-disco.dts
@@ -41,7 +41,7 @@
  */
 
 /dts-v1/;
-#include "stm32f746.dtsi"
+#include "stm32f769.dtsi"
 #include "stm32f769-pinctrl.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -60,19 +60,35 @@
 		reg = <0xC0000000 0x1000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,dma {
+			compatible = "shared-dma-pool";
+			linux,dma-default;
+			no-map;
+			size = <0x100000>;
+		};
+	};
+
 	aliases {
 		serial0 = &usart1;
 	};
 
 	leds {
 		compatible = "gpio-leds";
-		led-green {
+		led-usr2 {
 			gpios = <&gpioj 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
-		led-red {
+		led-usr1 {
 			gpios = <&gpioj 13 GPIO_ACTIVE_HIGH>;
 		};
+		led-usr3 {
+			gpios = <&gpioa 12 GPIO_ACTIVE_HIGH>;
+		};
 	};
 
 	gpio-keys {
@@ -92,9 +108,9 @@
 		clock-names = "main_clk";
 	};
 
-	mmc_vcard: mmc_vcard {
+	vcc_3v3: vcc-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "mmc_vcard";
+		regulator-name = "vcc_3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
@@ -114,6 +130,45 @@
 	clock-frequency = <25000000>;
 };
 
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_out_dsi>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+
+	panel0: panel@0 {
+		compatible = "orisetech,otm8009a";
+		reg = <0>; /* dsi virtual channel (0..3) */
+		reset-gpios = <&gpioj 15 GPIO_ACTIVE_LOW>;
+		power-supply = <&vcc_3v3>;
+		status = "okay";
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
 &i2c1 {
 	pinctrl-0 = <&i2c1_pins_b>;
 	pinctrl-names = "default";
@@ -122,18 +177,29 @@
 	status = "okay";
 };
 
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_out_dsi: endpoint {
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
 &rtc {
 	status = "okay";
 };
 
 &sdio2 {
 	status = "okay";
-	vmmc-supply = <&mmc_vcard>;
+	vmmc-supply = <&vcc_3v3>;
 	cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
 	broken-cd;
-	pinctrl-names = "default", "opendrain";
+	pinctrl-names = "default", "opendrain", "sleep";
 	pinctrl-0 = <&sdio_pins_b>;
 	pinctrl-1 = <&sdio_pins_od_b>;
+	pinctrl-2 = <&sdio_pins_sleep_b>;
 	bus-width = <4>;
 };
 
diff --git a/arch/arm/boot/dts/st/stm32f769-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32f769-pinctrl.dtsi
new file mode 100644
index 000000000000..02c2a8b08468
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32f769-pinctrl.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Alexandre Torgue  <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32f7-pinctrl.dtsi"
+
+&pinctrl {
+	compatible = "st,stm32f769-pinctrl";
+
+	gpioa: gpio@40020000 {
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@40020400 {
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@40020800 {
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@40020c00 {
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@40021000 {
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@40021400 {
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@40021800 {
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@40021c00 {
+		gpio-ranges = <&pinctrl 0 112 16>;
+	};
+
+	gpioi: gpio@40022000 {
+		gpio-ranges = <&pinctrl 0 128 16>;
+	};
+
+	gpioj: gpio@40022400 {
+		gpio-ranges = <&pinctrl 0 144 16>;
+	};
+
+	gpiok: gpio@40022800 {
+		gpio-ranges = <&pinctrl 0 160 8>;
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32f769.dtsi b/arch/arm/boot/dts/st/stm32f769.dtsi
new file mode 100644
index 000000000000..e8cbb99e81a6
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32f769.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023 Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ */
+
+#include "stm32f746.dtsi"
+
+/ {
+	soc {
+		can3: can@40003400 {
+			compatible = "st,stm32f4-bxcan";
+			reg = <0x40003400 0x200>;
+			interrupts = <104>, <105>, <106>, <107>;
+			interrupt-names = "tx", "rx0", "rx1", "sce";
+			resets = <&rcc STM32F7_APB1_RESET(CAN3)>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
+			st,gcan = <&gcan3>;
+			status = "disabled";
+		};
+
+		gcan3: gcan@40003600 {
+			compatible = "st,stm32f4-gcan", "syscon";
+			reg = <0x40003600 0x200>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
+		};
+
+		dsi: dsi@40016c00 {
+			compatible = "st,stm32-dsi";
+			reg = <0x40016c00 0x800>;
+			clocks = <&rcc 1 CLK_F769_DSI>, <&clk_hse>;
+			clock-names = "pclk", "ref";
+			resets = <&rcc STM32F7_APB2_RESET(DSI)>;
+			reset-names = "apb";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32h7-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32h7-pinctrl.dtsi
index aa1bc3e10a49..8a6db484383d 100644
--- a/arch/arm/boot/dts/stm32h7-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32h7-pinctrl.dtsi
@@ -94,7 +94,7 @@
 			drive-push-pull;
 			bias-disable;
 		};
-		pins2{
+		pins2 {
 			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
 			slew-rate = <3>;
 			drive-open-drain;
@@ -122,7 +122,7 @@
 			drive-push-pull;
 			bias-pull-up;
 		};
-		pins2{
+		pins2 {
 			pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */
 			bias-pull-up;
 		};
@@ -162,7 +162,7 @@
 			drive-push-pull;
 			bias-disable;
 		};
-		pins2{
+		pins2 {
 			pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */
 			slew-rate = <3>;
 			drive-open-drain;
@@ -198,7 +198,7 @@
 		};
 	};
 
-	uart4_pins: uart4-0 {
+	uart4_pins_a: uart4-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('A', 0, AF8)>; /* UART4_TX */
 			bias-disable;
@@ -211,7 +211,20 @@
 		};
 	};
 
-	usart1_pins: usart1-0 {
+	uart8_pins_a: uart8-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('J', 8, AF8)>; /* UART8_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('J', 9, AF8)>; /* UART8_RX */
+			bias-disable;
+		};
+	};
+
+	usart1_pins_a: usart1-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
 			bias-disable;
@@ -224,7 +237,20 @@
 		};
 	};
 
-	usart2_pins: usart2-0 {
+	usart1_pins_b: usart1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_pins_a: usart2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
 			bias-disable;
@@ -237,7 +263,7 @@
 		};
 	};
 
-	usart3_pins: usart3-0 {
+	usart3_pins_a: usart3-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
 				 <STM32_PINMUX('D', 12, AF7)>; /* USART3_RTS_DE */
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/st/stm32h743.dtsi
index 2059593da21d..2f19cfbc57ad 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/st/stm32h743.dtsi
@@ -40,7 +40,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "armv7-m.dtsi"
+#include "../armv7-m.dtsi"
 #include <dt-bindings/clock/stm32h7-clks.h>
 #include <dt-bindings/mfd/stm32h7-rcc.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -211,6 +211,14 @@
 			};
 		};
 
+		uart8: serial@40007c00 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40007c00 0x400>;
+			interrupts = <83>;
+			status = "disabled";
+			clocks = <&rcc UART8_CK>;
+		};
+
 		usart1: serial@40011000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x40011000 0x400>;
@@ -375,7 +383,6 @@
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x52007000 0x1000>;
 			interrupts = <49>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC1_CK>;
 			clock-names = "apb_pclk";
 			resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>;
@@ -389,7 +396,6 @@
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x48022400 0x400>;
 			interrupts = <124>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC2_CK>;
 			clock-names = "apb_pclk";
 			resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>;
@@ -590,7 +596,6 @@
 			ranges = <0 0x58020000 0x3000>;
 			interrupt-parent = <&exti>;
 			st,syscfg = <&syscfg 0x8>;
-			pins-are-numbered;
 
 			gpioa: gpio@58020000 {
 				gpio-controller;
diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/st/stm32h743i-disco.dts
index 2b452883a708..8451a54a9a08 100644
--- a/arch/arm/boot/dts/stm32h743i-disco.dts
+++ b/arch/arm/boot/dts/st/stm32h743i-disco.dts
@@ -105,7 +105,7 @@
 };
 
 &usart2 {
-	pinctrl-0 = <&usart2_pins>;
+	pinctrl-0 = <&usart2_pins_a>;
 	pinctrl-names = "default";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/st/stm32h743i-eval.dts
index 5c5d8059bdc7..4b0ced27b80e 100644
--- a/arch/arm/boot/dts/stm32h743i-eval.dts
+++ b/arch/arm/boot/dts/st/stm32h743i-eval.dts
@@ -145,7 +145,7 @@
 };
 
 &usart1 {
-	pinctrl-0 = <&usart1_pins>;
+	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/st/stm32h747i-disco.dts b/arch/arm/boot/dts/st/stm32h747i-disco.dts
new file mode 100644
index 000000000000..99f0255dae8e
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32h747i-disco.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ */
+
+/dts-v1/;
+#include "stm32h743.dtsi"
+#include "stm32h7-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "STMicroelectronics STM32H747i-Discovery board";
+	compatible = "st,stm32h747i-disco", "st,stm32h747";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@d0000000 {
+		device_type = "memory";
+		reg = <0xd0000000 0x2000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+		serial1 = &uart8;
+	};
+
+	v3v3: regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green {
+			gpios = <&gpioi 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+		led-orange {
+			gpios = <&gpioi 13 GPIO_ACTIVE_LOW>;
+		};
+		led-red {
+			gpios = <&gpioi 14 GPIO_ACTIVE_LOW>;
+		};
+		led-blue {
+			gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		button-0 {
+			label = "User";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>;
+		};
+		button-1 {
+			label = "JoySel";
+			linux,code = <KEY_ENTER>;
+			gpios = <&gpiok 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+		button-2 {
+			label = "JoyDown";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpiok 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+		button-3 {
+			label = "JoyUp";
+			linux,code = <KEY_UP>;
+			gpios = <&gpiok 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+		button-4 {
+			label = "JoyLeft";
+			linux,code = <KEY_LEFT>;
+			gpios = <&gpiok 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+		button-5 {
+			label = "JoyRight";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&gpiok 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&mac {
+	status = "disabled";
+	pinctrl-0 = <&ethernet_rmii>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpioi 8 GPIO_ACTIVE_LOW>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_b>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-0 = <&uart8_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32h750.dtsi b/arch/arm/boot/dts/st/stm32h750.dtsi
index 41e3b1e3a874..41e3b1e3a874 100644
--- a/arch/arm/boot/dts/stm32h750.dtsi
+++ b/arch/arm/boot/dts/st/stm32h750.dtsi
diff --git a/arch/arm/boot/dts/stm32h750i-art-pi.dts b/arch/arm/boot/dts/st/stm32h750i-art-pi.dts
index f3e70d3b65ac..56c53e262da7 100644
--- a/arch/arm/boot/dts/stm32h750i-art-pi.dts
+++ b/arch/arm/boot/dts/st/stm32h750i-art-pi.dts
@@ -167,7 +167,7 @@
 
 	#address-cells = <1>;
 	#size-cells = <0>;
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
@@ -197,18 +197,18 @@
 };
 
 &usart2 {
-	pinctrl-0 = <&usart2_pins>;
+	pinctrl-0 = <&usart2_pins_a>;
 	pinctrl-names = "default";
 	status = "disabled";
 };
 
 &usart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&usart3_pins>;
+	pinctrl-0 = <&usart3_pins_a>;
 	dmas = <&dmamux1 45 0x400 0x05>,
 	       <&dmamux1 46 0x400 0x05>;
 	dma-names = "rx", "tx";
-	st,hw-flow-ctrl;
+	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {
@@ -221,7 +221,7 @@
 };
 
 &uart4 {
-	pinctrl-0 = <&uart4_pins>;
+	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-names = "default";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
new file mode 100644
index 000000000000..a422b32d71d1
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
@@ -0,0 +1,1163 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com>
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+	/omit-if-no-ref/
+	adc1_pins_a: adc1-pins-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* ADC1 in12 */
+		};
+	};
+
+	/omit-if-no-ref/
+	adc1_usb_cc_pins_a: adc1-usb-cc-pins-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+				 <STM32_PINMUX('A', 3, ANALOG)>; /* ADC1 in12 */
+		};
+	};
+
+	/omit-if-no-ref/
+	adc1_usb_cc_pins_b: adc1-usb-cc-pins-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 5, ANALOG)>, /* ADC1_INP2 */
+				 <STM32_PINMUX('F', 13, ANALOG)>; /* ADC1_INP11 */
+		};
+	};
+
+	/omit-if-no-ref/
+	dcmipp_pins_a: dcmi-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H',  8,  AF13)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('G',  9,  AF13)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('B',  7,  AF14)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('A',  9,  AF13)>,/* DCMI_D0 */
+				 <STM32_PINMUX('D',  0,  AF13)>,/* DCMI_D1 */
+				 <STM32_PINMUX('G', 10,  AF13)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E',  4,  AF13)>,/* DCMI_D3 */
+				 <STM32_PINMUX('D', 11,  AF14)>,/* DCMI_D4 */
+				 <STM32_PINMUX('D',  3,  AF13)>,/* DCMI_D5 */
+				 <STM32_PINMUX('B',  8,  AF13)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 14,  AF13)>;/* DCMI_D7 */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	dcmipp_sleep_pins_a: dcmi-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H',  8,  ANALOG)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('G',  9,  ANALOG)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('B',  7,  ANALOG)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('A',  9,  ANALOG)>,/* DCMI_D0 */
+				 <STM32_PINMUX('D',  0,  ANALOG)>,/* DCMI_D1 */
+				 <STM32_PINMUX('G', 10,  ANALOG)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E',  4,  ANALOG)>,/* DCMI_D3 */
+				 <STM32_PINMUX('D', 11,  ANALOG)>,/* DCMI_D4 */
+				 <STM32_PINMUX('D',  3,  ANALOG)>,/* DCMI_D5 */
+				 <STM32_PINMUX('B',  8,  ANALOG)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 14,  ANALOG)>;/* DCMI_D7 */
+		};
+	};
+
+	/omit-if-no-ref/
+	eth1_rgmii_pins_a: eth1-rgmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 5, AF10)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 7, AF11)>, /* ETH_RGMII_RX_CTL */
+				 <STM32_PINMUX('D', 7, AF10)>; /* ETH_RGMII_RX_CLK */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	eth1_rgmii_sleep_pins_a: eth1-rgmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 5, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('A', 7, ANALOG)>, /* ETH_RGMII_RX_CTL */
+				 <STM32_PINMUX('D', 7, ANALOG)>; /* ETH_RGMII_RX_CLK */
+		};
+	};
+
+	/omit-if-no-ref/
+	eth1_rmii_pins_a: eth1-rmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RMII_RXD1 */
+				 <STM32_PINMUX('C', 1, AF10)>; /* ETH_RMII_CRS_DV */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	eth1_rmii_sleep_pins_a: eth1-rmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 2, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RMII_RXD1 */
+				 <STM32_PINMUX('C', 1, ANALOG)>; /* ETH_RMII_CRS_DV */
+		};
+	};
+
+	/omit-if-no-ref/
+	eth2_rgmii_pins_a: eth2-rgmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 11, AF10)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('G', 1, AF10)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 6, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('F', 6, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('G', 3, AF10)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 6, AF11)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 5, AF10)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('E', 2, AF10)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF12)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('A', 8, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 12, AF11)>, /* ETH_RGMII_RX_CTL */
+				 <STM32_PINMUX('H', 11, AF11)>; /* ETH_RGMII_RX_CLK */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	eth2_rgmii_sleep_pins_a: eth2-rgmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 6, AF11)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 5, AF10)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('G', 1, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 6, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('G', 3, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('A', 8, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 12, ANALOG)>, /* ETH_RGMII_RX_CTL */
+				 <STM32_PINMUX('H', 11, ANALOG)>; /* ETH_RGMII_RX_CLK */
+		};
+	};
+
+	/omit-if-no-ref/
+	eth2_rmii_pins_a: eth2-rmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, AF11)>, /* ETH_RMII_TXD0 */
+				 <STM32_PINMUX('G', 11, AF10)>, /* ETH_RMII_TXD1 */
+				 <STM32_PINMUX('G', 8, AF13)>, /* ETH_RMII_ETHCK */
+				 <STM32_PINMUX('F', 6, AF11)>, /* ETH_RMII_TX_EN */
+				 <STM32_PINMUX('B', 2, AF11)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 5, AF10)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 4, AF11)>, /* ETH_RMII_RXD0 */
+				 <STM32_PINMUX('E', 2, AF10)>, /* ETH_RMII_RXD1 */
+				 <STM32_PINMUX('A', 12, AF11)>; /* ETH_RMII_CRS_DV */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	eth2_rmii_sleep_pins_a: eth2-rmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RMII_TXD0 */
+				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RMII_TXD1 */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* ETH_RMII_ETHCK */
+				 <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RMII_TX_EN */
+				 <STM32_PINMUX('B', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RMII_RXD0 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RMII_RXD1 */
+				 <STM32_PINMUX('A', 12, ANALOG)>; /* ETH_RMII_CRS_DV */
+		};
+	};
+
+	/omit-if-no-ref/
+	goodix_pins_a: goodix-0 {
+		/*
+		 * touchscreen reset needs to be configured
+		 * via the pinctrl not the driver (a pull-down resistor
+		 * has been soldered onto the reset line which forces
+		 * the touchscreen to reset state).
+		 */
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 2, GPIO)>;
+			output-high;
+			bias-pull-up;
+		};
+		/*
+		 * Interrupt line must have a pull-down resistor
+		 * in order to freeze the i2c address at 0x5D
+		 */
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 5, GPIO)>;
+			bias-pull-down;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c1_pins_a: i2c1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('E', 8, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c1_sleep_pins_a: i2c1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('E', 8, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c5_pins_a: i2c5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 1, AF4)>, /* I2C5_SCL */
+				 <STM32_PINMUX('H', 6, AF4)>; /* I2C5_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c5_sleep_pins_a: i2c5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* I2C5_SCL */
+				 <STM32_PINMUX('H', 6, ANALOG)>; /* I2C5_SDA */
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c5_pins_b: i2c5-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 1, AF4)>, /* I2C5_SCL */
+				 <STM32_PINMUX('E', 13, AF4)>; /* I2C5_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c5_sleep_pins_b: i2c5-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* I2C5_SCL */
+				 <STM32_PINMUX('E', 13, ANALOG)>; /* I2C5_SDA */
+		};
+	};
+
+	/omit-if-no-ref/
+	ltdc_pins_a: ltdc-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D',  9, AF13)>, /* LCD_CLK */
+				 <STM32_PINMUX('C',  6, AF14)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('G',  4, AF11)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('H',  9, AF11)>, /* LCD_DE */
+				 <STM32_PINMUX('G',  7, AF14)>, /* LCD_R2 */
+				 <STM32_PINMUX('B', 12, AF13)>, /* LCD_R3 */
+				 <STM32_PINMUX('D', 14, AF14)>, /* LCD_R4 */
+				 <STM32_PINMUX('E',  7, AF14)>, /* LCD_R5 */
+				 <STM32_PINMUX('E', 13, AF14)>, /* LCD_R6 */
+				 <STM32_PINMUX('E',  9, AF14)>, /* LCD_R7 */
+				 <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+				 <STM32_PINMUX('F',  3, AF14)>, /* LCD_G3 */
+				 <STM32_PINMUX('D',  5, AF14)>, /* LCD_G4 */
+				 <STM32_PINMUX('G',  0, AF14)>, /* LCD_G5 */
+				 <STM32_PINMUX('C',  7, AF14)>, /* LCD_G6 */
+				 <STM32_PINMUX('A', 15, AF11)>, /* LCD_G7 */
+				 <STM32_PINMUX('D', 10, AF14)>, /* LCD_B2 */
+				 <STM32_PINMUX('F',  2, AF14)>, /* LCD_B3 */
+				 <STM32_PINMUX('H', 14, AF11)>, /* LCD_B4 */
+				 <STM32_PINMUX('E',  0, AF14)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  6, AF7)>,  /* LCD_B6 */
+				 <STM32_PINMUX('F',  1, AF13)>; /* LCD_B7 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	ltdc_sleep_pins_a: ltdc-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D',  9, ANALOG)>, /* LCD_CLK */
+				 <STM32_PINMUX('C',  6, ANALOG)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('G',  4, ANALOG)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('H',  9, ANALOG)>, /* LCD_DE */
+				 <STM32_PINMUX('G',  7, ANALOG)>, /* LCD_R2 */
+				 <STM32_PINMUX('B', 12, ANALOG)>, /* LCD_R3 */
+				 <STM32_PINMUX('D', 14, ANALOG)>, /* LCD_R4 */
+				 <STM32_PINMUX('E',  7, ANALOG)>, /* LCD_R5 */
+				 <STM32_PINMUX('E', 13, ANALOG)>, /* LCD_R6 */
+				 <STM32_PINMUX('E',  9, ANALOG)>, /* LCD_R7 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+				 <STM32_PINMUX('F',  3, ANALOG)>, /* LCD_G3 */
+				 <STM32_PINMUX('D',  5, ANALOG)>, /* LCD_G4 */
+				 <STM32_PINMUX('G',  0, ANALOG)>, /* LCD_G5 */
+				 <STM32_PINMUX('C',  7, ANALOG)>, /* LCD_G6 */
+				 <STM32_PINMUX('A', 15, ANALOG)>, /* LCD_G7 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B2 */
+				 <STM32_PINMUX('F',  2, ANALOG)>, /* LCD_B3 */
+				 <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_B4 */
+				 <STM32_PINMUX('E',  0, ANALOG)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  6, ANALOG)>, /* LCD_B6 */
+				 <STM32_PINMUX('F',  1, ANALOG)>; /* LCD_B7 */
+		};
+	};
+
+	/omit-if-no-ref/
+	m_can1_pins_a: m-can1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 10, AF9)>; /* CAN1_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	m_can1_sleep_pins_a: m_can1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 10, ANALOG)>, /* CAN1_TX */
+				 <STM32_PINMUX('D', 0, ANALOG)>; /* CAN1_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	m_can2_pins_a: m-can2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 0, AF9)>; /* CAN2_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 0, AF9)>; /* CAN2_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	m_can2_sleep_pins_a: m_can2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 0, ANALOG)>, /* CAN2_TX */
+				 <STM32_PINMUX('E', 0, ANALOG)>; /* CAN2_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	mcp23017_pins_a: mcp23017-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 12, GPIO)>;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm3_pins_a: pwm3-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 1, AF2)>; /* TIM3_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm3_sleep_pins_a: pwm3-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 1, ANALOG)>; /* TIM3_CH4 */
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm4_pins_a: pwm4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm4_sleep_pins_a: pwm4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm5_pins_a: pwm5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 12, AF2)>; /* TIM5_CH3 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm5_sleep_pins_a: pwm5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 12, ANALOG)>; /* TIM5_CH3 */
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm8_pins_a: pwm8-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 5, AF3)>; /* TIM8_CH3 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm8_sleep_pins_a: pwm8-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 5, ANALOG)>; /* TIM8_CH3 */
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm13_pins_a: pwm13-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 6, AF9)>; /* TIM13_CH1 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm13_sleep_pins_a: pwm13-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 6, ANALOG)>; /* TIM13_CH1 */
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm14_pins_a: pwm14-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 9, AF9)>; /* TIM14_CH1 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm14_sleep_pins_a: pwm14-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 9, ANALOG)>; /* TIM14_CH1 */
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_clk_pins_a: qspi-clk-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_bk1_pins_a: qspi-bk1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('D', 11, AF9)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('H', 7, AF13)>; /* QSPI_BK1_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('D', 11, ANALOG)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('H', 7, ANALOG)>; /* QSPI_BK1_IO3 */
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_cs1_pins_a: qspi-cs1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 2, AF9)>; /* QSPI_BK1_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_cs1_sleep_pins_a: qspi-cs1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 2, ANALOG)>; /* QSPI_BK1_NCS */
+		};
+	};
+
+	/omit-if-no-ref/
+	rtc_rsvd_pins_a: rtc-rsvd-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 1, ANALOG)>; /* RTC_OUT2_RMP */
+		};
+	};
+
+	/omit-if-no-ref/
+	sai1a_pins_a: sai1a-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, AF12)>, /* SAI1_SCK_A */
+				 <STM32_PINMUX('D', 6, AF6)>, /* SAI1_SD_A */
+				 <STM32_PINMUX('E', 11, AF6)>; /* SAI1_FS_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sai1a_sleep_pins_a: sai1a-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* SAI1_SCK_A */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* SAI1_SD_A */
+				 <STM32_PINMUX('E', 11, ANALOG)>; /* SAI1_FS_A */
+		};
+	};
+
+	/omit-if-no-ref/
+	sai1b_pins_a: sai1b-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 0, AF6)>; /* SAI1_SD_B */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sai1b_sleep_pins_a: sai1b-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* SAI1_SD_B */
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc1_clk_pins_a: sdmmc1-clk-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF10)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+				 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_clk_pins_a: sdmmc2-clk-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC2_CK */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_d47_pins_a: sdmmc2-d47-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 0, AF10)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('B', 9, AF10)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	/omit-if-no-ref/
+	spi2_pins_a: spi2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF6)>, /* SPI2_SCK */
+				 <STM32_PINMUX('H', 10, AF6)>; /* SPI2_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 5, AF5)>; /* SPI2_MISO */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	spi2_sleep_pins_a: spi2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* SPI2_SCK */
+				 <STM32_PINMUX('B', 5, ANALOG)>, /* SPI2_MISO */
+				 <STM32_PINMUX('H', 10, ANALOG)>; /* SPI2_MOSI */
+		};
+	};
+
+	/omit-if-no-ref/
+	spi3_pins_a: spi3-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 13, AF6)>, /* SPI3_SCK */
+				 <STM32_PINMUX('F', 1, AF5)>; /* SPI3_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 4, AF5)>; /* SPI3_MISO */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	spi3_sleep_pins_a: spi3-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* SPI3_SCK */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* SPI3_MISO */
+				 <STM32_PINMUX('F', 1, ANALOG)>; /* SPI3_MOSI */
+		};
+	};
+
+	/omit-if-no-ref/
+	spi5_pins_a: spi5-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 7, AF6)>, /* SPI5_SCK */
+				 <STM32_PINMUX('H', 3, AF5)>; /* SPI5_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 8, AF5)>; /* SPI5_MISO */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	spi5_sleep_pins_a: spi5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 7, ANALOG)>, /* SPI5_SCK */
+				 <STM32_PINMUX('A', 8, ANALOG)>, /* SPI5_MISO */
+				 <STM32_PINMUX('H', 3, ANALOG)>; /* SPI5_MOSI */
+		};
+	};
+
+	/omit-if-no-ref/
+	stm32g0_intn_pins_a: stm32g0-intn-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 2, GPIO)>;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_pins_a: uart4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_idle_pins_a: uart4-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 6, ANALOG)>; /* UART4_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_sleep_pins_a: uart4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 6, ANALOG)>, /* UART4_TX */
+				 <STM32_PINMUX('D', 8, ANALOG)>; /* UART4_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_pins_b: uart4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 9, AF8)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_idle_pins_b: uart4-idle-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 9, ANALOG)>; /* UART4_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_sleep_pins_b: uart4-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 9, ANALOG)>, /* UART4_TX */
+				 <STM32_PINMUX('D', 8, ANALOG)>; /* UART4_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	uart7_pins_a: uart7-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 2, AF8)>, /* UART7_TX */
+				 <STM32_PINMUX('B', 12, AF7)>; /* UART7_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 10, AF7)>, /* UART7_RX */
+				 <STM32_PINMUX('G', 7, AF8)>; /* UART7_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart7_idle_pins_a: uart7-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* UART7_TX */
+				 <STM32_PINMUX('G', 7, ANALOG)>; /* UART7_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF7)>; /* UART7_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('E', 10, AF7)>; /* UART7_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart7_sleep_pins_a: uart7-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* UART7_TX */
+				 <STM32_PINMUX('B', 12, ANALOG)>, /* UART7_RTS */
+				 <STM32_PINMUX('E', 10, ANALOG)>, /* UART7_RX */
+				 <STM32_PINMUX('G', 7, ANALOG)>; /* UART7_CTS_NSS */
+		};
+	};
+
+	/omit-if-no-ref/
+	uart8_pins_a: uart8-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart8_idle_pins_a: uart8-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 1, ANALOG)>; /* UART8_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart8_sleep_pins_a: uart8-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 1, ANALOG)>, /* UART8_TX */
+				 <STM32_PINMUX('F', 9, ANALOG)>; /* UART8_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	usart1_pins_a: usart1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 0, AF7)>, /* USART1_TX */
+				 <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 0, AF4)>, /* USART1_RX */
+				 <STM32_PINMUX('A', 7, AF7)>; /* USART1_CTS_NSS */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart1_idle_pins_a: usart1-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* USART1_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('B', 0, AF4)>; /* USART1_RX */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart1_sleep_pins_a: usart1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* USART1_RTS */
+				 <STM32_PINMUX('A', 7, ANALOG)>, /* USART1_CTS_NSS */
+				 <STM32_PINMUX('B', 0, ANALOG)>; /* USART1_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	usart1_pins_b: usart1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 0, AF7)>; /* USART1_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 14, AF7)>; /* USART1_RX */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart1_idle_pins_b: usart1-idle-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>; /* USART1_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 14, AF7)>; /* USART1_RX */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart1_sleep_pins_b: usart1-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */
+				 <STM32_PINMUX('D', 14, ANALOG)>; /* USART1_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	usart2_pins_a: usart2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 12, AF1)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 15, AF1)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 11, AF2)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart2_idle_pins_a: usart2-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 15, AF1)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart2_sleep_pins_a: usart2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 15, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
+
+	/omit-if-no-ref/
+	usart2_pins_b: usart2-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 11, AF1)>, /* USART2_TX */
+				 <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 15, AF1)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 15, AF3)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart2_idle_pins_b: usart2-idle-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 15, AF1)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart2_sleep_pins_b: usart2-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 15, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
new file mode 100644
index 000000000000..fd730aa37c22
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -0,0 +1,1783 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/stm32mp13-clks.h>
+#include <dt-bindings/reset/stm32mp13-resets.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+		interrupt-parent = <&intc>;
+	};
+
+	firmware {
+		optee {
+			method = "smc";
+			compatible = "linaro,optee-tz";
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		scmi: scmi {
+			compatible = "linaro,scmi-optee";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linaro,optee-channel-id = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+
+			scmi_voltd: protocol@17 {
+				reg = <0x17>;
+
+				scmi_regu: regulators {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					scmi_reg11: regulator@0 {
+						reg = <VOLTD_SCMI_REG11>;
+						regulator-name = "reg11";
+					};
+					scmi_reg18: regulator@1 {
+						reg = <VOLTD_SCMI_REG18>;
+						regulator-name = "reg18";
+					};
+					scmi_usb33: regulator@2 {
+						reg = <VOLTD_SCMI_USB33>;
+						regulator-name = "usb33";
+					};
+				};
+			};
+		};
+	};
+
+	intc: interrupt-controller@a0021000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xa0021000 0x1000>,
+		      <0xa0022000 0x2000>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&intc>;
+		always-on;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&dts>;
+
+			trips {
+				cpu_alert1: cpu-alert1 {
+					temperature = <85000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+
+		timers2: timer@40000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000000 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
+			clocks = <&rcc TIM2_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 18 0x400 0x1>,
+			       <&dmamux1 19 0x400 0x1>,
+			       <&dmamux1 20 0x400 0x1>,
+			       <&dmamux1 21 0x400 0x1>,
+			       <&dmamux1 22 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4", "up";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@1 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <1>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers3: timer@40001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001000 0x400>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
+			clocks = <&rcc TIM3_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 23 0x400 0x1>,
+			       <&dmamux1 24 0x400 0x1>,
+			       <&dmamux1 25 0x400 0x1>,
+			       <&dmamux1 26 0x400 0x1>,
+			       <&dmamux1 27 0x400 0x1>,
+			       <&dmamux1 28 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@2 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <2>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers4: timer@40002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40002000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
+			clocks = <&rcc TIM4_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 29 0x400 0x1>,
+			       <&dmamux1 30 0x400 0x1>,
+			       <&dmamux1 31 0x400 0x1>,
+			       <&dmamux1 32 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "up";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@3 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <3>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers5: timer@40003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40003000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
+			clocks = <&rcc TIM5_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 55 0x400 0x1>,
+			       <&dmamux1 56 0x400 0x1>,
+			       <&dmamux1 57 0x400 0x1>,
+			       <&dmamux1 58 0x400 0x1>,
+			       <&dmamux1 59 0x400 0x1>,
+			       <&dmamux1 60 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@4 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <4>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers6: timer@40004000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40004000 0x400>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
+			clocks = <&rcc TIM6_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 69 0x400 0x1>;
+			dma-names = "up";
+			status = "disabled";
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+
+			timer@5 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <5>;
+				status = "disabled";
+			};
+		};
+
+		timers7: timer@40005000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40005000 0x400>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
+			clocks = <&rcc TIM7_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 70 0x400 0x1>;
+			dma-names = "up";
+			status = "disabled";
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+
+			timer@6 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <6>;
+				status = "disabled";
+			};
+		};
+
+		lptimer1: timer@40009000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x40009000 0x400>;
+			interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LPTIM1_K>;
+			clock-names = "mux";
+			wakeup-source;
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@0 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-lptimer-counter";
+				status = "disabled";
+			};
+
+			timer {
+				compatible = "st,stm32-lptimer-timer";
+				status = "disabled";
+			};
+		};
+
+		i2s2: audio-controller@4000b000 {
+			compatible = "st,stm32h7-i2s";
+			reg = <0x4000b000 0x400>;
+			#sound-dai-cells = <0>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmamux1 39 0x400 0x01>,
+			       <&dmamux1 40 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi2: spi@4000b000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x4000b000 0x400>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI2_K>;
+			resets = <&rcc SPI2_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 39 0x400 0x01>,
+			       <&dmamux1 40 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s3: audio-controller@4000c000 {
+			compatible = "st,stm32h7-i2s";
+			reg = <0x4000c000 0x400>;
+			#sound-dai-cells = <0>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmamux1 61 0x400 0x01>,
+			       <&dmamux1 62 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi3: spi@4000c000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x4000c000 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI3_K>;
+			resets = <&rcc SPI3_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 61 0x400 0x01>,
+			       <&dmamux1 62 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spdifrx: audio-controller@4000d000 {
+			compatible = "st,stm32h7-spdifrx";
+			reg = <0x4000d000 0x400>;
+			#sound-dai-cells = <0>;
+			clocks = <&rcc SPDIF_K>;
+			clock-names = "kclk";
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmamux1 93 0x400 0x01>,
+			       <&dmamux1 94 0x400 0x01>;
+			dma-names = "rx", "rx-ctrl";
+			status = "disabled";
+		};
+
+		usart3: serial@4000f000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4000f000 0x400>;
+			interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART3_K>;
+			resets = <&rcc USART3_R>;
+			wakeup-source;
+			dmas = <&dmamux1 45 0x400 0x5>,
+			       <&dmamux1 46 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart4: serial@40010000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40010000 0x400>;
+			interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART4_K>;
+			resets = <&rcc UART4_R>;
+			wakeup-source;
+			dmas = <&dmamux1 63 0x400 0x5>,
+			       <&dmamux1 64 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart5: serial@40011000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40011000 0x400>;
+			interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART5_K>;
+			resets = <&rcc UART5_R>;
+			wakeup-source;
+			dmas = <&dmamux1 65 0x400 0x5>,
+			       <&dmamux1 66 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c1: i2c@40012000 {
+			compatible = "st,stm32mp13-i2c";
+			reg = <0x40012000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C1_K>;
+			resets = <&rcc I2C1_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 33 0x400 0x1>,
+			       <&dmamux1 34 0x400 0x1>;
+			dma-names = "rx", "tx";
+			st,syscfg-fmp = <&syscfg 0x4 0x1>;
+			i2c-analog-filter;
+			status = "disabled";
+		};
+
+		i2c2: i2c@40013000 {
+			compatible = "st,stm32mp13-i2c";
+			reg = <0x40013000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C2_K>;
+			resets = <&rcc I2C2_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 35 0x400 0x1>,
+			       <&dmamux1 36 0x400 0x1>;
+			dma-names = "rx", "tx";
+			st,syscfg-fmp = <&syscfg 0x4 0x2>;
+			i2c-analog-filter;
+			status = "disabled";
+		};
+
+		uart7: serial@40018000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40018000 0x400>;
+			interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART7_K>;
+			resets = <&rcc UART7_R>;
+			wakeup-source;
+			dmas = <&dmamux1 79 0x400 0x5>,
+			       <&dmamux1 80 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart8: serial@40019000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40019000 0x400>;
+			interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART8_K>;
+			resets = <&rcc UART8_R>;
+			wakeup-source;
+			dmas = <&dmamux1 81 0x400 0x5>,
+			       <&dmamux1 82 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		timers1: timer@44000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x44000000 0x400>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "brk", "up", "trg-com", "cc";
+			clocks = <&rcc TIM1_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 11 0x400 0x1>,
+			       <&dmamux1 12 0x400 0x1>,
+			       <&dmamux1 13 0x400 0x1>,
+			       <&dmamux1 14 0x400 0x1>,
+			       <&dmamux1 15 0x400 0x1>,
+			       <&dmamux1 16 0x400 0x1>,
+			       <&dmamux1 17 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4",
+				    "up", "trig", "com";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@0 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers8: timer@44001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x44001000 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "brk", "up", "trg-com", "cc";
+			clocks = <&rcc TIM8_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 47 0x400 0x1>,
+			       <&dmamux1 48 0x400 0x1>,
+			       <&dmamux1 49 0x400 0x1>,
+			       <&dmamux1 50 0x400 0x1>,
+			       <&dmamux1 51 0x400 0x1>,
+			       <&dmamux1 52 0x400 0x1>,
+			       <&dmamux1 53 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4",
+				    "up", "trig", "com";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@7 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <7>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		usart6: serial@44003000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x44003000 0x400>;
+			interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART6_K>;
+			resets = <&rcc USART6_R>;
+			wakeup-source;
+			dmas = <&dmamux1 71 0x400 0x5>,
+			       <&dmamux1 72 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: audio-controller@44004000 {
+			compatible = "st,stm32h7-i2s";
+			reg = <0x44004000 0x400>;
+			#sound-dai-cells = <0>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmamux1 37 0x400 0x01>,
+			       <&dmamux1 38 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi1: spi@44004000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x44004000 0x400>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI1_K>;
+			resets = <&rcc SPI1_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 37 0x400 0x01>,
+			       <&dmamux1 38 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sai1: sai@4400a000 {
+			compatible = "st,stm32h7-sai";
+			reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
+			ranges = <0 0x4400a000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc SAI1_R>;
+			status = "disabled";
+
+			sai1a: audio-controller@4400a004 {
+				compatible = "st,stm32-sai-sub-a";
+				reg = <0x4 0x20>;
+				#sound-dai-cells = <0>;
+				clocks = <&rcc SAI1_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 87 0x400 0x01>;
+				status = "disabled";
+			};
+
+			sai1b: audio-controller@4400a024 {
+				compatible = "st,stm32-sai-sub-b";
+				reg = <0x24 0x20>;
+				#sound-dai-cells = <0>;
+				clocks = <&rcc SAI1_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 88 0x400 0x01>;
+				status = "disabled";
+			};
+		};
+
+		sai2: sai@4400b000 {
+			compatible = "st,stm32h7-sai";
+			reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
+			ranges = <0 0x4400b000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc SAI2_R>;
+			status = "disabled";
+
+			sai2a: audio-controller@4400b004 {
+				compatible = "st,stm32-sai-sub-a";
+				reg = <0x4 0x20>;
+				#sound-dai-cells = <0>;
+				clocks = <&rcc SAI2_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 89 0x400 0x01>;
+				status = "disabled";
+			};
+
+			sai2b: audio-controller@4400b024 {
+				compatible = "st,stm32-sai-sub-b";
+				reg = <0x24 0x20>;
+				#sound-dai-cells = <0>;
+				clocks = <&rcc SAI2_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 90 0x400 0x01>;
+				status = "disabled";
+			};
+		};
+
+		dfsdm: dfsdm@4400d000 {
+			compatible = "st,stm32mp1-dfsdm";
+			reg = <0x4400d000 0x800>;
+			clocks = <&rcc DFSDM_K>;
+			clock-names = "dfsdm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			dfsdm0: filter@0 {
+				compatible = "st,stm32-dfsdm-adc";
+				reg = <0>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 101 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dfsdm1: filter@1 {
+				compatible = "st,stm32-dfsdm-adc";
+				reg = <1>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 102 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+		};
+
+		dma1: dma-controller@48000000 {
+			compatible = "st,stm32-dma";
+			reg = <0x48000000 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc DMA1>;
+			resets = <&rcc DMA1_R>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			dma-requests = <8>;
+		};
+
+		dma2: dma-controller@48001000 {
+			compatible = "st,stm32-dma";
+			reg = <0x48001000 0x400>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc DMA2>;
+			resets = <&rcc DMA2_R>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			dma-requests = <8>;
+		};
+
+		dmamux1: dma-router@48002000 {
+			compatible = "st,stm32h7-dmamux";
+			reg = <0x48002000 0x40>;
+			clocks = <&rcc DMAMUX1>;
+			resets = <&rcc DMAMUX1_R>;
+			#dma-cells = <3>;
+			dma-masters = <&dma1 &dma2>;
+			dma-requests = <128>;
+			dma-channels = <16>;
+		};
+
+		rcc: rcc@50000000 {
+			compatible = "st,stm32mp13-rcc", "syscon";
+			reg = <0x50000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clock-names = "hse", "hsi", "csi", "lse", "lsi";
+			clocks = <&scmi_clk CK_SCMI_HSE>,
+				 <&scmi_clk CK_SCMI_HSI>,
+				 <&scmi_clk CK_SCMI_CSI>,
+				 <&scmi_clk CK_SCMI_LSE>,
+				 <&scmi_clk CK_SCMI_LSI>;
+		};
+
+		pwr_regulators: pwr@50001000 {
+			compatible = "st,stm32mp1,pwr-reg";
+			reg = <0x50001000 0x10>;
+			status = "disabled";
+
+			reg11: reg11 {
+				regulator-name = "reg11";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			reg18: reg18 {
+				regulator-name = "reg18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			usb33: usb33 {
+				regulator-name = "usb33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+
+		exti: interrupt-controller@5000d000 {
+			compatible = "st,stm32mp1-exti", "syscon";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x5000d000 0x400>;
+			interrupts-extended =
+				<&intc GIC_SPI 6   IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_0 */
+				<&intc GIC_SPI 7   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 8   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 9   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 10  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 24  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 65  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 66  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 67  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 68  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 41  IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_10 */
+				<&intc GIC_SPI 43  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 77  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 78  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 1   IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 3   IRQ_TYPE_LEVEL_HIGH>,
+				<0>,						/* EXTI_20 */
+				<&intc GIC_SPI 32  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 34  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 73  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 93  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 38  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 39  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 40  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 72  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 53  IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_30 */
+				<&intc GIC_SPI 54  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 83  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 84  IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,						/* EXTI_40 */
+				<0>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 96  IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 92  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_50 */
+				<0>,
+				<&intc GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,						/* EXTI_60 */
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 63  IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 98  IRQ_TYPE_LEVEL_HIGH>;	/* EXTI_70 */
+		};
+
+		syscfg: syscon@50020000 {
+			compatible = "st,stm32mp157-syscfg", "syscon";
+			reg = <0x50020000 0x400>;
+			clocks = <&rcc SYSCFG>;
+		};
+
+		lptimer4: timer@50023000 {
+			compatible = "st,stm32-lptimer";
+			reg = <0x50023000 0x400>;
+			interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LPTIM4_K>;
+			clock-names = "mux";
+			wakeup-source;
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer {
+				compatible = "st,stm32-lptimer-timer";
+				status = "disabled";
+			};
+		};
+
+		lptimer5: timer@50024000 {
+			compatible = "st,stm32-lptimer";
+			reg = <0x50024000 0x400>;
+			interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LPTIM5_K>;
+			clock-names = "mux";
+			wakeup-source;
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer {
+				compatible = "st,stm32-lptimer-timer";
+				status = "disabled";
+			};
+		};
+
+		dts: thermal@50028000 {
+			compatible = "st,stm32-thermal";
+			reg = <0x50028000 0x100>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc DTS>;
+			clock-names = "pclk";
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		hdp: pinctrl@5002a000 {
+			compatible = "st,stm32mp131-hdp";
+			reg = <0x5002a000 0x400>;
+			clocks = <&rcc HDP>;
+			status = "disabled";
+		};
+
+		mdma: dma-controller@58000000 {
+			compatible = "st,stm32h7-mdma";
+			reg = <0x58000000 0x1000>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc MDMA>;
+			#dma-cells = <5>;
+			dma-channels = <32>;
+			dma-requests = <48>;
+		};
+
+		crc1: crc@58009000 {
+			compatible = "st,stm32f7-crc";
+			reg = <0x58009000 0x400>;
+			clocks = <&rcc CRC1>;
+			status = "disabled";
+		};
+
+		usbh_ohci: usb@5800c000 {
+			compatible = "generic-ohci";
+			reg = <0x5800c000 0x1000>;
+			clocks = <&usbphyc>, <&rcc USBH>;
+			resets = <&rcc USBH_R>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		usbh_ehci: usb@5800d000 {
+			compatible = "generic-ehci";
+			reg = <0x5800d000 0x1000>;
+			clocks = <&usbphyc>, <&rcc USBH>;
+			resets = <&rcc USBH_R>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			companion = <&usbh_ohci>;
+			status = "disabled";
+		};
+
+		iwdg2: watchdog@5a002000 {
+			compatible = "st,stm32mp1-iwdg";
+			reg = <0x5a002000 0x400>;
+			clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+			clock-names = "pclk", "lsi";
+			status = "disabled";
+		};
+
+		rtc: rtc@5c004000 {
+			compatible = "st,stm32mp1-rtc";
+			reg = <0x5c004000 0x400>;
+			interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk CK_SCMI_RTCAPB>,
+				 <&scmi_clk CK_SCMI_RTC>;
+			clock-names = "pclk", "rtc_ck";
+			status = "disabled";
+		};
+
+		bsec: efuse@5c005000 {
+			compatible = "st,stm32mp13-bsec";
+			reg = <0x5c005000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			part_number_otp: part_number_otp@4 {
+				reg = <0x4 0x2>;
+				bits = <0 12>;
+			};
+			vrefint: vrefin-cal@52 {
+				reg = <0x52 0x2>;
+			};
+			ts_cal1: calib@5c {
+				reg = <0x5c 0x2>;
+			};
+			ts_cal2: calib@5e {
+				reg = <0x5e 0x2>;
+			};
+			ethernet_mac1_address: mac1@e4 {
+				reg = <0xe4 0x6>;
+			};
+			ethernet_mac2_address: mac2@ea {
+				reg = <0xea 0x6>;
+			};
+		};
+
+		etzpc: bus@5c007000 {
+			compatible = "st,stm32-etzpc", "simple-bus";
+			reg = <0x5c007000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#access-controller-cells = <1>;
+			ranges;
+
+			adc_2: adc@48004000 {
+				compatible = "st,stm32mp13-adc-core";
+				reg = <0x48004000 0x400>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc ADC2>, <&rcc ADC2_K>;
+				clock-names = "bus", "adc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&etzpc 33>;
+				status = "disabled";
+
+				adc2: adc@0 {
+					compatible = "st,stm32mp13-adc";
+					#io-channel-cells = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+					interrupt-parent = <&adc_2>;
+					interrupts = <0>;
+					dmas = <&dmamux1 10 0x400 0x80000001>;
+					dma-names = "rx";
+					nvmem-cells = <&vrefint>;
+					nvmem-cell-names = "vrefint";
+					status = "disabled";
+
+					channel@13 {
+						reg = <13>;
+						label = "vrefint";
+					};
+					channel@14 {
+						reg = <14>;
+						label = "vddcore";
+					};
+					channel@16 {
+						reg = <16>;
+						label = "vddcpu";
+					};
+					channel@17 {
+						reg = <17>;
+						label = "vddq_ddr";
+					};
+				};
+			};
+
+			usbotg_hs: usb@49000000 {
+				compatible = "st,stm32mp15-hsotg", "snps,dwc2";
+				reg = <0x49000000 0x40000>;
+				clocks = <&rcc USBO_K>;
+				clock-names = "otg";
+				resets = <&rcc USBO_R>;
+				reset-names = "dwc2";
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				g-rx-fifo-size = <512>;
+				g-np-tx-fifo-size = <32>;
+				g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+				dr_mode = "otg";
+				otg-rev = <0x200>;
+				usb33d-supply = <&scmi_usb33>;
+				access-controllers = <&etzpc 34>;
+				status = "disabled";
+			};
+
+			usart1: serial@4c000000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x4c000000 0x400>;
+				interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc USART1_K>;
+				resets = <&rcc USART1_R>;
+				wakeup-source;
+				dmas = <&dmamux1 41 0x400 0x5>,
+				<&dmamux1 42 0x400 0x1>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 16>;
+				status = "disabled";
+			};
+
+			usart2: serial@4c001000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x4c001000 0x400>;
+				interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc USART2_K>;
+				resets = <&rcc USART2_R>;
+				wakeup-source;
+				dmas = <&dmamux1 43 0x400 0x5>,
+				<&dmamux1 44 0x400 0x1>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 17>;
+				status = "disabled";
+			};
+
+			i2s4: audio-controller@4c002000 {
+				compatible = "st,stm32h7-i2s";
+				reg = <0x4c002000 0x400>;
+				#sound-dai-cells = <0>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 83 0x400 0x01>,
+				<&dmamux1 84 0x400 0x01>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 13>;
+				status = "disabled";
+			};
+
+			spi4: spi@4c002000 {
+				compatible = "st,stm32h7-spi";
+				reg = <0x4c002000 0x400>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SPI4_K>;
+				resets = <&rcc SPI4_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dmamux1 83 0x400 0x01>,
+				       <&dmamux1 84 0x400 0x01>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 18>;
+				status = "disabled";
+			};
+
+			spi5: spi@4c003000 {
+				compatible = "st,stm32h7-spi";
+				reg = <0x4c003000 0x400>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SPI5_K>;
+				resets = <&rcc SPI5_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dmamux1 85 0x400 0x01>,
+				       <&dmamux1 86 0x400 0x01>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 19>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@4c004000 {
+				compatible = "st,stm32mp13-i2c";
+				reg = <0x4c004000 0x400>;
+				interrupt-names = "event", "error";
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc I2C3_K>;
+				resets = <&rcc I2C3_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dmamux1 73 0x400 0x1>,
+				       <&dmamux1 74 0x400 0x1>;
+				dma-names = "rx", "tx";
+				st,syscfg-fmp = <&syscfg 0x4 0x4>;
+				i2c-analog-filter;
+				access-controllers = <&etzpc 20>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@4c005000 {
+				compatible = "st,stm32mp13-i2c";
+				reg = <0x4c005000 0x400>;
+				interrupt-names = "event", "error";
+				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc I2C4_K>;
+				resets = <&rcc I2C4_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dmamux1 75 0x400 0x1>,
+				       <&dmamux1 76 0x400 0x1>;
+				dma-names = "rx", "tx";
+				st,syscfg-fmp = <&syscfg 0x4 0x8>;
+				i2c-analog-filter;
+				access-controllers = <&etzpc 21>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@4c006000 {
+				compatible = "st,stm32mp13-i2c";
+				reg = <0x4c006000 0x400>;
+				interrupt-names = "event", "error";
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc I2C5_K>;
+				resets = <&rcc I2C5_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dmamux1 115 0x400 0x1>,
+				       <&dmamux1 116 0x400 0x1>;
+				dma-names = "rx", "tx";
+				st,syscfg-fmp = <&syscfg 0x4 0x10>;
+				i2c-analog-filter;
+				access-controllers = <&etzpc 22>;
+				status = "disabled";
+			};
+
+			timers12: timer@4c007000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x4c007000 0x400>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM12_K>;
+				clock-names = "int";
+				access-controllers = <&etzpc 23>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@11 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <11>;
+					status = "disabled";
+				};
+			};
+
+			timers13: timer@4c008000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x4c008000 0x400>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM13_K>;
+				clock-names = "int";
+				access-controllers = <&etzpc 24>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@12 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <12>;
+					status = "disabled";
+				};
+			};
+
+			timers14: timer@4c009000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x4c009000 0x400>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM14_K>;
+				clock-names = "int";
+				access-controllers = <&etzpc 25>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@13 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <13>;
+					status = "disabled";
+				};
+			};
+
+			timers15: timer@4c00a000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x4c00a000 0x400>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM15_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 105 0x400 0x1>,
+				<&dmamux1 106 0x400 0x1>,
+				<&dmamux1 107 0x400 0x1>,
+				<&dmamux1 108 0x400 0x1>;
+				dma-names = "ch1", "up", "trig", "com";
+				access-controllers = <&etzpc 26>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@14 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <14>;
+					status = "disabled";
+				};
+			};
+
+			timers16: timer@4c00b000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x4c00b000 0x400>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM16_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 109 0x400 0x1>,
+				<&dmamux1 110 0x400 0x1>;
+				dma-names = "ch1", "up";
+				access-controllers = <&etzpc 27>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@15 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <15>;
+					status = "disabled";
+				};
+			};
+
+			timers17: timer@4c00c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x4c00c000 0x400>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM17_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 111 0x400 0x1>,
+				       <&dmamux1 112 0x400 0x1>;
+				dma-names = "ch1", "up";
+				access-controllers = <&etzpc 28>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@16 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <16>;
+					status = "disabled";
+				};
+			};
+
+			lptimer2: timer@50021000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-lptimer";
+				reg = <0x50021000 0x400>;
+				interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc LPTIM2_K>;
+				clock-names = "mux";
+				wakeup-source;
+				access-controllers = <&etzpc 1>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				trigger@1 {
+					compatible = "st,stm32-lptimer-trigger";
+					reg = <1>;
+					status = "disabled";
+				};
+
+				counter {
+					compatible = "st,stm32-lptimer-counter";
+					status = "disabled";
+				};
+
+				timer {
+					compatible = "st,stm32-lptimer-timer";
+					status = "disabled";
+				};
+			};
+
+			lptimer3: timer@50022000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-lptimer";
+				reg = <0x50022000 0x400>;
+				interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc LPTIM3_K>;
+				clock-names = "mux";
+				wakeup-source;
+				access-controllers = <&etzpc 2>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				trigger@2 {
+					compatible = "st,stm32-lptimer-trigger";
+					reg = <2>;
+					status = "disabled";
+				};
+
+				timer {
+					compatible = "st,stm32-lptimer-timer";
+					status = "disabled";
+				};
+			};
+
+			hash: hash@54003000 {
+				compatible = "st,stm32mp13-hash";
+				reg = <0x54003000 0x400>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc HASH1>;
+				resets = <&rcc HASH1_R>;
+				dmas = <&mdma 30 0x2 0x1000a02 0x0 0x0>;
+				dma-names = "in";
+				access-controllers = <&etzpc 41>;
+				status = "disabled";
+			};
+
+			rng: rng@54004000 {
+				compatible = "st,stm32mp13-rng";
+				reg = <0x54004000 0x400>;
+				clocks = <&rcc RNG1_K>;
+				resets = <&rcc RNG1_R>;
+				access-controllers = <&etzpc 40>;
+				status = "disabled";
+			};
+
+			fmc: memory-controller@58002000 {
+				compatible = "st,stm32mp1-fmc2-ebi";
+				reg = <0x58002000 0x1000>;
+				ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+					 <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+					 <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+					 <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+					 <4 0 0x80000000 0x10000000>; /* NAND */
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clocks = <&rcc FMC_K>;
+				resets = <&rcc FMC_R>;
+				access-controllers = <&etzpc 54>;
+				status = "disabled";
+
+				nand-controller@4,0 {
+					compatible = "st,stm32mp1-fmc2-nfc";
+					reg = <4 0x00000000 0x1000>,
+					      <4 0x08010000 0x1000>,
+					      <4 0x08020000 0x1000>,
+					      <4 0x01000000 0x1000>,
+					      <4 0x09010000 0x1000>,
+					      <4 0x09020000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>,
+					       <&mdma 24 0x2 0x12000a08 0x0 0x0>,
+					       <&mdma 25 0x2 0x12000a0a 0x0 0x0>;
+					dma-names = "tx", "rx", "ecc";
+					status = "disabled";
+				};
+			};
+
+			qspi: spi@58003000 {
+				compatible = "st,stm32f469-qspi";
+				reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+				reg-names = "qspi", "qspi_mm";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>,
+				       <&mdma 26 0x2 0x10100008 0x0 0x0>;
+				dma-names = "tx", "rx";
+				clocks = <&rcc QSPI_K>;
+				resets = <&rcc QSPI_R>;
+				access-controllers = <&etzpc 55>;
+				status = "disabled";
+			};
+
+			sdmmc1: mmc@58005000 {
+				compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x20253180>;
+				reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SDMMC1_K>;
+				clock-names = "apb_pclk";
+				resets = <&rcc SDMMC1_R>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <130000000>;
+				access-controllers = <&etzpc 50>;
+				status = "disabled";
+			};
+
+			sdmmc2: mmc@58007000 {
+				compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x20253180>;
+				reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SDMMC2_K>;
+				clock-names = "apb_pclk";
+				resets = <&rcc SDMMC2_R>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <130000000>;
+				access-controllers = <&etzpc 51>;
+				status = "disabled";
+			};
+
+			ethernet1: ethernet@5800a000 {
+				compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
+				reg = <0x5800a000 0x2000>;
+				reg-names = "stmmaceth";
+				interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+						      <&exti 68 1>;
+				interrupt-names = "macirq", "eth_wake_irq";
+				clock-names = "stmmaceth",
+					      "mac-clk-tx",
+					      "mac-clk-rx",
+					      "ethstp",
+					      "ptp_ref",
+					      "eth-ck";
+				clocks = <&rcc ETH1MAC>,
+					 <&rcc ETH1TX>,
+					 <&rcc ETH1RX>,
+					 <&rcc ETH1STP>,
+					 <&rcc ETH1PTP_K>,
+					 <&rcc ETH1CK_K>;
+				st,syscon = <&syscfg 0x4 0xff0000>;
+				snps,mixed-burst;
+				snps,pbl = <2>;
+				snps,axi-config = <&stmmac_axi_config_1>;
+				snps,tso;
+				access-controllers = <&etzpc 48>;
+				nvmem-cells = <&ethernet_mac1_address>;
+				nvmem-cell-names = "mac-address";
+				status = "disabled";
+
+				stmmac_axi_config_1: stmmac-axi-config {
+					snps,blen = <0 0 0 0 16 8 4>;
+					snps,rd_osr_lmt = <0x7>;
+					snps,wr_osr_lmt = <0x7>;
+				};
+			};
+
+			usbphyc: usbphyc@5a006000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#clock-cells = <0>;
+				compatible = "st,stm32mp1-usbphyc";
+				reg = <0x5a006000 0x1000>;
+				clocks = <&rcc USBPHY_K>;
+				resets = <&rcc USBPHY_R>;
+				vdda1v1-supply = <&scmi_reg11>;
+				vdda1v8-supply = <&scmi_reg18>;
+				access-controllers = <&etzpc 5>;
+				status = "disabled";
+
+				usbphyc_port0: usb-phy@0 {
+					#phy-cells = <0>;
+					reg = <0>;
+				};
+
+				usbphyc_port1: usb-phy@1 {
+					#phy-cells = <1>;
+					reg = <1>;
+				};
+			};
+		};
+
+		/*
+		 * Break node order to solve dependency probe issue between
+		 * pinctrl and exti.
+		 */
+		pinctrl: pinctrl@50002000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp135-pinctrl";
+			ranges = <0 0x50002000 0x8400>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
+
+			gpioa: gpio@50002000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc GPIOA>;
+				st,bank-name = "GPIOA";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 0 16>;
+			};
+
+			gpiob: gpio@50003000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc GPIOB>;
+				st,bank-name = "GPIOB";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			gpioc: gpio@50004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc GPIOC>;
+				st,bank-name = "GPIOC";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			gpiod: gpio@50005000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x400>;
+				clocks = <&rcc GPIOD>;
+				st,bank-name = "GPIOD";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			gpioe: gpio@50006000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x400>;
+				clocks = <&rcc GPIOE>;
+				st,bank-name = "GPIOE";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			gpiof: gpio@50007000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x400>;
+				clocks = <&rcc GPIOF>;
+				st,bank-name = "GPIOF";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 80 16>;
+			};
+
+			gpiog: gpio@50008000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x400>;
+				clocks = <&rcc GPIOG>;
+				st,bank-name = "GPIOG";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			gpioh: gpio@50009000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x400>;
+				clocks = <&rcc GPIOH>;
+				st,bank-name = "GPIOH";
+				ngpios = <15>;
+				gpio-ranges = <&pinctrl 0 112 15>;
+			};
+
+			gpioi: gpio@5000a000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x400>;
+				clocks = <&rcc GPIOI>;
+				st,bank-name = "GPIOI";
+				ngpios = <8>;
+				gpio-ranges = <&pinctrl 0 128 8>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi
new file mode 100644
index 000000000000..053fc6691205
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp133.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp131.dtsi"
+
+/ {
+	soc {
+		m_can1: can@4400e000 {
+			compatible = "bosch,m_can";
+			reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+			status = "disabled";
+		};
+
+		m_can2: can@4400f000 {
+			compatible = "bosch,m_can";
+			reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
+			status = "disabled";
+		};
+	};
+};
+
+&etzpc {
+	adc_1: adc@48003000 {
+		compatible = "st,stm32mp13-adc-core";
+		reg = <0x48003000 0x400>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rcc ADC1>, <&rcc ADC1_K>;
+		clock-names = "bus", "adc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		access-controllers = <&etzpc 32>;
+		status = "disabled";
+
+		adc1: adc@0 {
+			compatible = "st,stm32mp13-adc";
+			#io-channel-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+			interrupt-parent = <&adc_1>;
+			interrupts = <0>;
+			dmas = <&dmamux1 9 0x400 0x80000001>;
+			dma-names = "rx";
+			nvmem-cells = <&vrefint>;
+			nvmem-cell-names = "vrefint";
+			status = "disabled";
+
+			channel@18 {
+				reg = <18>;
+				label = "vrefint";
+			};
+		};
+	};
+
+	ethernet2: ethernet@5800e000 {
+		compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
+		reg = <0x5800e000 0x2000>;
+		reg-names = "stmmaceth";
+		interrupts-extended = <&intc GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clock-names = "stmmaceth",
+			      "mac-clk-tx",
+			      "mac-clk-rx",
+			      "ethstp",
+			      "ptp_ref",
+			      "eth-ck";
+		clocks = <&rcc ETH2MAC>,
+			 <&rcc ETH2TX>,
+			 <&rcc ETH2RX>,
+			 <&rcc ETH2STP>,
+			 <&rcc ETH2PTP_K>,
+			 <&rcc ETH2CK_K>;
+		st,syscon = <&syscfg 0x4 0xff000000>;
+		snps,mixed-burst;
+		snps,pbl = <2>;
+		snps,axi-config = <&stmmac_axi_config_2>;
+		snps,tso;
+		access-controllers = <&etzpc 49>;
+		nvmem-cells = <&ethernet_mac2_address>;
+		nvmem-cell-names = "mac-address";
+		status = "disabled";
+
+		stmmac_axi_config_2: stmmac-axi-config {
+			snps,blen = <0 0 0 0 16 8 4>;
+			snps,rd_osr_lmt = <0x7>;
+			snps,wr_osr_lmt = <0x7>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp133c-prihmb.dts b/arch/arm/boot/dts/st/stm32mp133c-prihmb.dts
new file mode 100644
index 000000000000..663b6de1b814
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp133c-prihmb.dts
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/st,stm32mp13-regulator.h>
+#include "stm32mp133.dtsi"
+#include "stm32mp13xc.dtsi"
+#include "stm32mp13-pinctrl.dtsi"
+
+/ {
+	model = "Priva E-Measuringbox board";
+	compatible = "pri,prihmb", "st,stm32mp133";
+
+	aliases {
+		ethernet0 = &ethernet1;
+		mdio-gpio0 = &mdio0;
+		mmc0 = &sdmmc1;
+		mmc1 = &sdmmc2;
+		serial0 = &uart4;
+		serial1 = &usart6;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	counter-0 {
+		compatible = "interrupt-counter";
+		gpios = <&gpioa 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-reset {
+			label = "reset-button";
+			linux,code = <BTN_1>;
+			gpios = <&gpioi 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	led-controller-0 {
+		compatible = "pwm-leds-multicolor";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+			max-brightness = <255>;
+
+			led-red {
+				active-low;
+				color = <LED_COLOR_ID_RED>;
+				pwms = <&pwm2 2 1000000 1>;
+			};
+
+			led-green {
+				active-low;
+				color = <LED_COLOR_ID_GREEN>;
+				pwms = <&pwm1 1 1000000 1>;
+			};
+
+			led-blue {
+				active-low;
+				color = <LED_COLOR_ID_BLUE>;
+				pwms = <&pwm1 2 1000000 1>;
+			};
+		};
+	};
+
+	led-controller-1 {
+		compatible = "pwm-leds-multicolor";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+			max-brightness = <255>;
+
+			led-red {
+				active-low;
+				color = <LED_COLOR_ID_RED>;
+				pwms = <&pwm1 0 1000000 1>;
+			};
+
+			led-green {
+				active-low;
+				color = <LED_COLOR_ID_GREEN>;
+				pwms = <&pwm2 0 1000000 1>;
+			};
+
+			led-blue {
+				active-low;
+				color = <LED_COLOR_ID_BLUE>;
+				pwms = <&pwm2 1 1000000 1>;
+			};
+		};
+	};
+
+	/* DP83TD510E PHYs have max MDC rate of 1.75MHz. Since we can't reduce
+	 * stmmac MDC clock without reducing system bus rate, we need to use
+	 * gpio based MDIO bus.
+	 */
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&gpiog 2 GPIO_ACTIVE_HIGH
+			 &gpioa 2 GPIO_ACTIVE_HIGH>;
+
+		/* TI DP83TD510E */
+		phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-id2000.0181";
+			reg = <0>;
+			interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10>;
+			reset-deassert-us = <35>;
+		};
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x10000000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		optee@ce000000 {
+			reg = <0xce000000 0x02000000>;
+			no-map;
+		};
+	};
+};
+
+&adc_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc_1_pins_a>;
+	vdda-supply = <&reg_3v3>;
+	vref-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+
+	channel@0 { /* Fan current PC0*/
+		reg = <0>;
+		st,min-sample-time-ns = <10000>;  /* 10µs sampling time */
+	};
+	channel@11 { /* Fan voltage */
+		reg = <11>;
+		st,min-sample-time-ns = <10000>;  /* 10µs sampling time */
+	};
+	channel@15 { /* Supply voltage */
+		reg = <15>;
+		st,min-sample-time-ns = <10000>;  /* 10µs sampling time */
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&ethernet1 {
+	status = "okay";
+	pinctrl-0 = <&ethernet1_rmii_pins_a>;
+	pinctrl-1 = <&ethernet1_rmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	clock-frequency = <100000>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	board-sensor@48 {
+		compatible = "ti,tmp1075";
+		reg = <0x48>;
+		vs-supply = <&reg_3v3>;
+	};
+};
+
+&{i2c1_pins_a/pins} {
+	pinmux = <STM32_PINMUX('D', 3, AF5)>, /* I2C1_SCL */
+		 <STM32_PINMUX('B', 8, AF4)>; /* I2C1_SDA */
+	bias-disable;
+	drive-open-drain;
+	slew-rate = <0>;
+};
+
+&{i2c1_sleep_pins_a/pins} {
+	pinmux = <STM32_PINMUX('D', 3, ANALOG)>, /* I2C1_SCL */
+		 <STM32_PINMUX('B', 8, ANALOG)>; /* I2C1_SDA */
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+/* SD card without Card-detect */
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	broken-cd;
+	no-sdio;
+	no-1-8-v;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+/* EMMC */
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	no-1-8-v;
+	st,neg-edge;
+	mmc-ddr-3_3v;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&timers1 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pwm1: pwm {
+		pinctrl-0 = <&pwm1_pins_a>;
+		pinctrl-1 = <&pwm1_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+};
+
+&timers4 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pwm2: pwm {
+		pinctrl-0 = <&pwm4_pins_a>;
+		pinctrl-1 = <&pwm4_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+};
+
+/* Fan PWM */
+&timers5 {
+	status = "okay";
+
+	pwm3: pwm {
+		pinctrl-0 = <&pwm5_pins_a>;
+		pinctrl-1 = <&pwm5_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+};
+
+&timers2 {
+	status = "okay";
+
+	timer@1 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart7_pins_a>;
+	pinctrl-1 = <&uart7_sleep_pins_a>;
+	pinctrl-2 = <&uart7_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&usart6 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart6_pins_a>;
+	pinctrl-1 = <&usart6_sleep_pins_a>;
+	pinctrl-2 = <&usart6_idle_pins_a>;
+	linux,rs485-enabled-at-boot-time;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&pinctrl {
+	adc_1_pins_a: adc1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* ADC1 in0 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ADC1 in15 */
+				 <STM32_PINMUX('F', 13, ANALOG)>; /* ADC1 in11 */
+		};
+	};
+
+	ethernet1_rmii_pins_a: rmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, AF11)>;   /* ETH1_RMII_REF_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
+			bias-disable;
+		};
+	};
+
+	ethernet1_rmii_sleep_pins_a: rmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
+		};
+	};
+
+	pwm1_pins_a: pwm1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */
+				 <STM32_PINMUX('E', 11, AF1)>, /* TIM1_CH2 */
+				 <STM32_PINMUX('E', 13, AF1)>; /* TIM1_CH3 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm1_sleep_pins_a: pwm1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, ANALOG)>, /* TIM1_CH1 */
+				 <STM32_PINMUX('E', 11, ANALOG)>, /* TIM1_CH2 */
+				 <STM32_PINMUX('E', 13, ANALOG)>; /* TIM1_CH3 */
+		};
+	};
+
+	pwm4_pins_a: pwm4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, AF2)>, /* TIM4_CH1 */
+				 <STM32_PINMUX('B', 7, AF2)>, /* TIM4_CH2 */
+				 <STM32_PINMUX('D', 14, AF2)>; /* TIM4_CH3 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm4_sleep_pins_a: pwm4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* TIM4_CH1 */
+				 <STM32_PINMUX('B', 7, ANALOG)>, /* TIM4_CH2 */
+				 <STM32_PINMUX('D', 14, ANALOG)>; /* TIM4_CH3 */
+		};
+	};
+	pwm5_pins_a: pwm5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
+		};
+	};
+
+	pwm5_sleep_pins_a: pwm5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */
+		};
+	};
+
+	uart7_pins_a: uart7-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 10, AF7)>; /* UART7_RX */
+			bias-pull-up;
+		};
+	};
+
+	uart7_idle_pins_a: uart7-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>; /* UART7_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 10, AF7)>; /* UART7_RX */
+			bias-pull-up;
+		};
+	};
+
+	uart7_sleep_pins_a: uart7-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>, /* UART7_TX */
+				 <STM32_PINMUX('E', 10, ANALOG)>; /* UART7_RX */
+		};
+	};
+
+	usart6_pins_a: usart6-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 8, AF7)>, /* USART6_TX */
+				 <STM32_PINMUX('F', 10, AF7)>; /* USART6_DE */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('H', 11, AF7)>; /* USART6_RX */
+			bias-disable;
+		};
+	};
+
+	usart6_idle_pins_a: usart6-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 8, ANALOG)>; /* USART6_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 10, AF7)>; /* USART6_DE */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('H', 11, AF7)>; /* USART6_RX */
+			bias-disable;
+		};
+	};
+
+	usart6_sleep_pins_a: usart6-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* USART6_TX */
+				 <STM32_PINMUX('F', 10, ANALOG)>, /* USART6_DE */
+				 <STM32_PINMUX('H', 11, ANALOG)>; /* USART6_RX */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp135.dtsi b/arch/arm/boot/dts/st/stm32mp135.dtsi
new file mode 100644
index 000000000000..834a4d545fe4
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp135.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp133.dtsi"
+
+/ {
+	soc {
+		dcmipp: dcmipp@5a000000 {
+			compatible = "st,stm32mp13-dcmipp";
+			reg = <0x5a000000 0x400>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc DCMIPP_R>;
+			clocks = <&rcc DCMIPP_K>;
+			status = "disabled";
+
+			port {
+			};
+		};
+
+		ltdc: display-controller@5a001000 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x5a001000 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LTDC_PX>;
+			clock-names = "lcd";
+			resets = <&scmi_reset RST_SCMI_LTDC>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts
new file mode 100644
index 000000000000..9902849ed040
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts
@@ -0,0 +1,447 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2024 Marek Vasut <marex@denx.de>
+ *
+ * DHCOR STM32MP13 variant:
+ * DHCR-STM32MP135F-C100-R051-EE-F0409-SPI4-RTC-WBT-I-01LG
+ * DHCOR PCB number: 718-100 or newer
+ * DHSBC PCB number: 719-100 or newer
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/st,stm32mp13-regulator.h>
+#include "stm32mp135.dtsi"
+#include "stm32mp13xf.dtsi"
+#include "stm32mp13xx-dhcor-som.dtsi"
+
+/ {
+	model = "DH electronics STM32MP135F DHCOR DHSBC";
+	compatible = "dh,stm32mp135f-dhcor-dhsbc",
+		     "dh,stm32mp135f-dhcor-som",
+		     "st,stm32mp135";
+
+	aliases {
+		ethernet0 = &ethernet1;
+		ethernet1 = &ethernet2;
+		serial2 = &usart1;
+		serial3 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&adc_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc1_pins_a &adc1_usb_cc_pins_b>;
+	vdda-supply = <&vdd_adc>;
+	vref-supply = <&vdd_adc>;
+	status = "okay";
+
+	adc1: adc@0 {
+		status = "okay";
+
+		/*
+		 * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in2 & in11.
+		 * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
+		 * 5 * (5.1 + 47kOhms) * 5pF => 1.3us.
+		 * Use arbitrary margin here (e.g. 5us).
+		 *
+		 * The pinmux pins must be set as ANALOG, use datasheet
+		 * DS13483 Table 7. STM32MP135C/F ball definitions to
+		 * find out which 'pin name' maps to which 'additional
+		 * functions', which lists the mapping between pin and
+		 * ADC channel. In this case, PA5 maps to ADC1_INP2 and
+		 * PF13 maps to ADC1_INP11 .
+		 */
+		channel@2 {
+			reg = <2>;
+			st,min-sample-time-ns = <5000>;
+		};
+
+		channel@11 {
+			reg = <11>;
+			st,min-sample-time-ns = <5000>;
+		};
+
+		/* Expansion connector: INP12:pin29 */
+		channel@12 {
+			reg = <12>;
+			st,min-sample-time-ns = <5000>;
+		};
+	};
+};
+
+&ethernet1 {
+	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&ethernet_mac1_address>;
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&eth1_rgmii_pins_a>;
+	pinctrl-1 = <&eth1_rgmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	st,ext-phyclk;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		ethphy1: ethernet-phy@1 {
+			/* RTL8211F */
+			compatible = "ethernet-phy-id001c.c916";
+			interrupt-parent = <&gpiog>;
+			interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+			reg = <1>;
+			realtek,clkout-disable;
+			reset-assert-us = <15000>;
+			reset-deassert-us = <55000>;
+			reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_WAN;
+					linux,default-trigger = "netdev";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_YELLOW>;
+					function = LED_FUNCTION_WAN;
+					linux,default-trigger = "netdev";
+				};
+			};
+		};
+	};
+};
+
+&ethernet2 {
+	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&ethernet_mac2_address>;
+	phy-handle = <&ethphy2>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&eth2_rgmii_pins_a>;
+	pinctrl-1 = <&eth2_rgmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	st,ext-phyclk;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		ethphy2: ethernet-phy@1 {
+			/* RTL8211F */
+			compatible = "ethernet-phy-id001c.c916";
+			interrupt-parent = <&gpiog>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+			reg = <1>;
+			realtek,clkout-disable;
+			reset-assert-us = <15000>;
+			reset-deassert-us = <55000>;
+			reset-gpios = <&gpiog 8 GPIO_ACTIVE_LOW>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "netdev";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_YELLOW>;
+					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "netdev";
+				};
+			};
+		};
+	};
+};
+
+&gpioa {
+	gpio-line-names = "", "", "", "",
+			  "", "DHSBC_USB_PWR_CC1", "", "",
+			  "", "", "", "DHSBC_nETH1_RST",
+			  "", "DHCOR_HW-CODING_0", "", "DHSBC_HW-CODE_2";
+};
+
+&gpiob {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "DHCOR_BT_HOST_WAKE",
+			  "", "", "", "",
+			  "", "DHSBC_nTPM_CS", "", "";
+};
+
+&gpioc {
+	gpio-line-names = "", "", "", "DHSBC_USB_5V_MEAS",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpiod {
+	gpio-line-names = "", "", "", "",
+			  "", "DHCOR_RAM-CODING_0", "", "",
+			  "", "DHCOR_RAM-CODING_1", "", "",
+			  "", "DHSBC_HW-CODE_1", "", "";
+};
+
+&gpioe {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "DHSBC_nTPM_RST", "", "",
+			  "DHSBC_nTPM_PIRQ", "", "DHCOR_WL_HOST_WAKE", "";
+};
+
+&gpiof {
+	gpio-line-names = "", "", "DHSBC_USB_PWR_nFLT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "DHCOR_WL_REG_ON", "DHSBC_USB_PWR_CC2", "", "";
+};
+
+&gpiog {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "DHSBC_nETH2_RST", "DHCOR_BT_DEV_WAKE", "", "",
+			  "DHSBC_ETH1_INTB", "", "", "DHSBC_ETH2_INTB";
+};
+
+&gpioh {
+	gpio-line-names = "", "", "", "DHSBC_HW-CODE_0",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpioi {
+	gpio-line-names = "DHCOR_RTC_nINT", "DHCOR_HW-CODING_1",
+			  "DHCOR_BT_REG_ON", "DHCOR_PMIC_nINT",
+			  "DHSBC_BOOT0", "DHSBC_BOOT1",
+			  "DHSBC_BOOT2", "DHSBC_USB-C_DATA_VBUS";
+};
+
+&i2c1 { /* Expansion connector: SDA:pin27 SCL:pin28 */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <96>;
+	i2c-scl-falling-time-ns = <3>;
+	clock-frequency = <400000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c5 { /* Expansion connector: SDA:pin3 SCL:pin5 */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_b>;
+	pinctrl-1 = <&i2c5_sleep_pins_b>;
+	i2c-scl-rising-time-ns = <96>;
+	i2c-scl-falling-time-ns = <3>;
+	clock-frequency = <400000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&m_can1 { /* Expansion connector: TX:pin16 RX:pin18 */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can1_pins_a>;
+	pinctrl-1 = <&m_can1_sleep_pins_a>;
+	status = "okay";
+};
+
+&m_can2 { /* Expansion connector: TX:pin22 RX:pin26 */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can2_pins_a>;
+	pinctrl-1 = <&m_can2_sleep_pins_a>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+	status = "okay";
+};
+
+&sai1 { /* Expansion connector: SCK-A:pin12 FS-A:pin35 SD-A:pin38 SD-B:pin40 */
+	clocks = <&rcc SAI1>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sai1a_pins_a &sai1b_pins_a>;
+	pinctrl-1 = <&sai1a_sleep_pins_a &sai1b_sleep_pins_a>;
+};
+
+&scmi_voltd {
+	status = "disabled";
+};
+
+&spi2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi2_pins_a>;
+	pinctrl-1 = <&spi2_sleep_pins_a>;
+	cs-gpios = <&gpiob 13 0>;
+	status = "okay";
+
+	st33htph: tpm@0 {
+		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
+		reg = <0>;
+		interrupt-parent = <&gpioe>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpioe 12 GPIO_ACTIVE_LOW>;
+		spi-max-frequency = <24000000>;
+	};
+};
+
+&spi3 { /* Expansion connector: MOSI:pin19 MISO:pin21 SCK:pin22 nCS:pin24 */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi3_pins_a>;
+	pinctrl-1 = <&spi3_sleep_pins_a>;
+	cs-gpios = <&gpiof 3 0>;
+	status = "disabled";
+};
+
+&timers5 { /* Expansion connector: CH3:pin31 */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm5_pins_a>;
+		pinctrl-1 = <&pwm5_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@4 {
+		status = "okay";
+	};
+};
+
+&timers13 { /* Expansion connector: CH1:pin32 */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm13_pins_a>;
+		pinctrl-1 = <&pwm13_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@12 {
+		status = "okay";
+	};
+};
+
+&usart1 { /* Expansion connector: RX:pin33 TX:pin37 */
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart1_pins_b>;
+	pinctrl-1 = <&usart1_sleep_pins_b>;
+	pinctrl-2 = <&usart1_idle_pins_b>;
+	status = "okay";
+};
+
+&usart2 { /* Expansion connector: RX:pin10 TX:pin8 RTS:pin11 CTS:pin36 */
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart2_pins_b>;
+	pinctrl-1 = <&usart2_sleep_pins_b>;
+	pinctrl-2 = <&usart2_idle_pins_b>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbh_ohci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "peripheral";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	usb33d-supply = <&usb33>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	st,current-boost-microamp = <1000>;
+	st,decrease-hs-slew-rate;
+	st,tune-hs-dc-level = <2>;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <11>;
+	st,trim-hs-impedance = <2>;
+	st,tune-squelch-level = <1>;
+	st,enable-hs-rx-gain-eq;
+	st,no-hs-ftime-ctrl;
+	st,no-lsfs-sc;
+	connector {
+		compatible = "usb-a-connector";
+		vbus-supply = <&vbus_sw>;
+	};
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	st,current-boost-microamp = <1000>;
+	st,decrease-hs-slew-rate;
+	st,tune-hs-dc-level = <2>;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <11>;
+	st,trim-hs-impedance = <2>;
+	st,tune-squelch-level = <1>;
+	st,enable-hs-rx-gain-eq;
+	st,no-hs-ftime-ctrl;
+	st,no-lsfs-sc;
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		vbus-gpios = <&gpioi 7 GPIO_ACTIVE_HIGH>;
+		label = "Type-C";
+		self-powered;
+		type = "micro";
+	};
+};
+
+/* LDO2 is expansion connector 3V3 supply on STM32MP13xx DHCOR DHSBC rev.200 */
+&vdd_ldo2 {
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+/* LDO5 is carrier board 3V3 supply on STM32MP13xx DHCOR DHSBC rev.200 */
+&vdd_sd {
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
new file mode 100644
index 000000000000..9764a6bfa5b4
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
@@ -0,0 +1,615 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/st,stm32mp13-regulator.h>
+#include "stm32mp135.dtsi"
+#include "stm32mp13xf.dtsi"
+#include "stm32mp13-pinctrl.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP135F-DK Discovery Board";
+	compatible = "st,stm32mp135f-dk", "st,stm32mp135";
+
+	aliases {
+		ethernet0 = &ethernet1;
+		serial0 = &uart4;
+		serial1 = &usart1;
+		serial2 = &uart8;
+		serial3 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		clk_ext_camera: clk-ext-camera {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		clk_mco1: clk-mco1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		optee@dd000000 {
+			reg = <0xdd000000 0x3000000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-user {
+			label = "User-PA13";
+			linux,code = <BTN_1>;
+			gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	panel_backlight: panel-backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpioe 12 GPIO_ACTIVE_HIGH>;
+		default-on;
+		status = "okay";
+	};
+
+	panel_rgb: panel-rgb {
+		compatible = "rocktech,rk043fn48h";
+		enable-gpios = <&gpioi 7 GPIO_ACTIVE_HIGH>;
+		backlight = <&panel_backlight>;
+		power-supply = <&scmi_v3v3_sw>;
+		status = "okay";
+
+		width-mm = <105>;
+		height-mm = <67>;
+
+		panel-timing {
+			clock-frequency = <10000000>;
+			hactive = <480>;
+			hback-porch = <43>;
+			hfront-porch = <10>;
+			hsync-len = <1>;
+			hsync-active = <0>;
+			vactive = <272>;
+			vback-porch = <26>;
+			vfront-porch = <4>;
+			vsync-len = <10>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			panel_in_rgb: endpoint {
+				remote-endpoint = <&ltdc_out_rgb>;
+			};
+		};
+	};
+
+	v3v3_ao: v3v3-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3_ao";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&mcp23017 11 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&adc_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc1_usb_cc_pins_a>;
+	vdda-supply = <&scmi_vdd_adc>;
+	vref-supply = <&scmi_vdd_adc>;
+	status = "okay";
+	adc1: adc@0 {
+		status = "okay";
+		/*
+		 * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in6 & in12.
+		 * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
+		 * 5 * (5.1 + 47kOhms) * 5pF => 1.3us.
+		 * Use arbitrary margin here (e.g. 5us).
+		 */
+		channel@6 {
+			reg = <6>;
+			st,min-sample-time-ns = <5000>;
+		};
+		channel@12 {
+			reg = <12>;
+			st,min-sample-time-ns = <5000>;
+		};
+	};
+};
+
+&crc1 {
+	status = "okay";
+};
+
+&cryp {
+	status = "okay";
+};
+
+&dcmipp {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dcmipp_pins_a>;
+	pinctrl-1 = <&dcmipp_sleep_pins_a>;
+	status = "okay";
+
+	port {
+		dcmipp_0: endpoint {
+			remote-endpoint = <&mipid02_2>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <0>;
+		};
+	};
+};
+
+&ethernet1 {
+	status = "okay";
+	pinctrl-0 = <&eth1_rmii_pins_a>;
+	pinctrl-1 = <&eth1_rmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rmii";
+	phy-handle = <&phy0_eth1>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0_eth1: ethernet-phy@0 {
+			compatible = "ethernet-phy-id0007.c131";
+			reg = <0>;
+			reset-gpios = <&mcp23017 9 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <96>;
+	i2c-scl-falling-time-ns = <3>;
+	clock-frequency = <1000000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	mcp23017: pinctrl@21 {
+		compatible = "microchip,mcp23017";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpiog>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcp23017_pins_a>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		microchip,irq-mirror;
+	};
+
+	typec@53 {
+		compatible = "st,stm32g0-typec";
+		reg = <0x53>;
+		/* Alert pin on PI2 */
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpioi>;
+		/* Internal pull-up on PI2 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&stm32g0_intn_pins_a>;
+		firmware-name = "stm32g0-ucsi.mp135f-dk.fw";
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+
+			port {
+				con_usb_c_g0_ep: endpoint {
+					remote-endpoint = <&usbotg_hs_ep>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_a>;
+	pinctrl-1 = <&i2c5_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <170>;
+	i2c-scl-falling-time-ns = <5>;
+	clock-frequency = <400000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	stmipi: csi2rx@14 {
+		compatible = "st,st-mipid02";
+		reg = <0x14>;
+		clocks = <&clk_mco1>;
+		clock-names = "xclk";
+		VDDE-supply = <&scmi_v1v8_periph>;
+		VDDIN-supply = <&scmi_v1v8_periph>;
+		reset-gpios = <&mcp23017 2 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+
+				mipid02_0: endpoint {
+					data-lanes = <1 2>;
+					lane-polarities = <0 0 0>;
+					remote-endpoint = <&gc2145_ep>;
+				};
+			};
+			port@2 {
+				reg = <2>;
+
+				mipid02_2: endpoint {
+					bus-width = <8>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					pclk-sample = <0>;
+					remote-endpoint = <&dcmipp_0>;
+				};
+			};
+		};
+	};
+
+	gc2145: camera@3c {
+		compatible = "galaxycore,gc2145";
+		reg = <0x3c>;
+		clocks = <&clk_ext_camera>;
+		iovdd-supply = <&scmi_v3v3_sw>;
+		avdd-supply = <&scmi_v3v3_sw>;
+		dvdd-supply = <&scmi_v3v3_sw>;
+		powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+		reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+		status = "okay";
+
+		port {
+			gc2145_ep: endpoint {
+				remote-endpoint = <&mipid02_0>;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <120000000 192000000 240000000>;
+			};
+		};
+	};
+
+	goodix: goodix-ts@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&goodix_pins_a>;
+		interrupt-parent = <&gpiof>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		AVDD28-supply = <&scmi_v3v3_sw>;
+		VDDIO-supply = <&scmi_v3v3_sw>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <272>;
+		status = "okay" ;
+	};
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_a>;
+	pinctrl-1 = <&ltdc_sleep_pins_a>;
+	status = "okay";
+
+	port {
+		ltdc_out_rgb: endpoint {
+			remote-endpoint = <&panel_in_rgb>;
+		};
+	};
+};
+
+&rtc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtc_rsvd_pins_a>;
+	status = "okay";
+
+	rtc_lsco_pins_a: rtc-lsco-0 {
+		pins = "out2_rmp";
+		function = "lsco";
+	};
+};
+
+&scmi_regu {
+	scmi_vdd_adc: regulator@10 {
+		reg = <VOLTD_SCMI_STPMIC1_LDO1>;
+		regulator-name = "vdd_adc";
+	};
+	scmi_vdd_usb: regulator@13 {
+		reg = <VOLTD_SCMI_STPMIC1_LDO4>;
+		regulator-name = "vdd_usb";
+	};
+	scmi_vdd_sd: regulator@14 {
+		reg = <VOLTD_SCMI_STPMIC1_LDO5>;
+		regulator-name = "vdd_sd";
+	};
+	scmi_v1v8_periph: regulator@15 {
+		reg = <VOLTD_SCMI_STPMIC1_LDO6>;
+		regulator-name = "v1v8_periph";
+	};
+	scmi_v3v3_sw: regulator@19 {
+		reg = <VOLTD_SCMI_STPMIC1_PWR_SW2>;
+		regulator-name = "v3v3_sw";
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpioh 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&scmi_vdd_sd>;
+	status = "okay";
+};
+
+/* Wifi */
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_clk_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_clk_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+	non-removable;
+	cap-sdio-irq;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3_ao>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_lsco_pins_a>;
+	};
+};
+
+&spi5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi5_pins_a>;
+	pinctrl-1 = <&spi5_sleep_pins_a>;
+	status = "disabled";
+};
+
+&timers3 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	counter {
+		status = "okay";
+	};
+	pwm {
+		/* PWM output on pin 7 of the expansion connector (CN8.7) using TIM3_CH4 func */
+		pinctrl-0 = <&pwm3_pins_a>;
+		pinctrl-1 = <&pwm3_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@2 {
+		status = "okay";
+	};
+};
+
+&timers4 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	counter {
+		status = "okay";
+	};
+	pwm {
+		/* PWM output on pin 31 of the expansion connector (CN8.31) using TIM4_CH2 func */
+		pinctrl-0 = <&pwm4_pins_a>;
+		pinctrl-1 = <&pwm4_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@3 {
+		status = "okay";
+	};
+};
+
+&timers8 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	counter {
+		status = "okay";
+	};
+	pwm {
+		/* PWM output on pin 32 of the expansion connector (CN8.32) using TIM8_CH3 func */
+		pinctrl-0 = <&pwm8_pins_a>;
+		pinctrl-1 = <&pwm8_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@7 {
+		status = "okay";
+	};
+};
+
+&timers14 {
+	status = "disabled";
+	counter {
+		status = "okay";
+	};
+	pwm {
+		/* PWM output on pin 33 of the expansion connector (CN8.33) using TIM14_CH1 func */
+		pinctrl-0 = <&pwm14_pins_a>;
+		pinctrl-1 = <&pwm14_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@13 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart8_pins_a>;
+	pinctrl-1 = <&uart8_sleep_pins_a>;
+	pinctrl-2 = <&uart8_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+};
+
+&usart1 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-1 = <&usart1_sleep_pins_a>;
+	pinctrl-2 = <&usart1_idle_pins_a>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Bluetooth */
+&usart2 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart2_pins_a>;
+	pinctrl-1 = <&usart2_sleep_pins_a>;
+	pinctrl-2 = <&usart2_idle_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		shutdown-gpios = <&mcp23017 13 GPIO_ACTIVE_HIGH>;
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+		vbat-supply = <&v3v3_ao>;
+		vddio-supply = <&v3v3_ao>;
+	};
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	/* onboard HUB */
+	hub@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		vdd-supply = <&scmi_v3v3_sw>;
+	};
+};
+
+&usbotg_hs {
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	usb-role-switch;
+	status = "okay";
+	port {
+		usbotg_hs_ep: endpoint {
+			remote-endpoint = <&con_usb_c_g0_ep>;
+		};
+	};
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&scmi_vdd_usb>;
+	st,current-boost-microamp = <1000>;
+	st,decrease-hs-slew-rate;
+	st,tune-hs-dc-level = <2>;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <11>;
+	st,trim-hs-impedance = <2>;
+	st,tune-squelch-level = <1>;
+	st,enable-hs-rx-gain-eq;
+	st,no-hs-ftime-ctrl;
+	st,no-lsfs-sc;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&scmi_vdd_usb>;
+	st,current-boost-microamp = <1000>;
+	st,decrease-hs-slew-rate;
+	st,tune-hs-dc-level = <2>;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <11>;
+	st,trim-hs-impedance = <2>;
+	st,tune-squelch-level = <1>;
+	st,enable-hs-rx-gain-eq;
+	st,no-hs-ftime-ctrl;
+	st,no-lsfs-sc;
+};
diff --git a/arch/arm/boot/dts/st/stm32mp13xc.dtsi b/arch/arm/boot/dts/st/stm32mp13xc.dtsi
new file mode 100644
index 000000000000..a8bd5fe6536c
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp13xc.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+&etzpc {
+	cryp: crypto@54002000 {
+		compatible = "st,stm32mp1-cryp";
+		reg = <0x54002000 0x400>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rcc CRYP1>;
+		resets = <&rcc CRYP1_R>;
+		access-controllers = <&etzpc 42>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp13xf.dtsi b/arch/arm/boot/dts/st/stm32mp13xf.dtsi
new file mode 100644
index 000000000000..a8bd5fe6536c
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp13xf.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+&etzpc {
+	cryp: crypto@54002000 {
+		compatible = "st,stm32mp1-cryp";
+		reg = <0x54002000 0x400>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rcc CRYP1>;
+		resets = <&rcc CRYP1_R>;
+		access-controllers = <&etzpc 42>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi b/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi
new file mode 100644
index 000000000000..c18156807027
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2024 Marek Vasut <marex@denx.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+#include <dt-bindings/regulator/st,stm32mp13-regulator.h>
+#include "stm32mp13-pinctrl.dtsi"
+
+/ {
+	model = "DH electronics STM32MP13xx DHCOR SoM";
+	compatible = "dh,stm32mp131a-dhcor-som",
+		     "st,stm32mp131";
+
+	aliases {
+		mmc0 = &sdmmc2;
+		mmc1 = &sdmmc1;
+		serial0 = &uart4;
+		serial1 = &uart7;
+		rtc0 = &rv3032;
+		spi0 = &qspi;
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		optee@dd000000 {
+			reg = <0xdd000000 0x3000000>;
+			no-map;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpiof 12 GPIO_ACTIVE_LOW>;
+	};
+
+	vin: vin {
+		compatible = "regulator-fixed";
+		regulator-name = "vin";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <96>;
+	i2c-scl-falling-time-ns = <3>;
+	clock-frequency = <400000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioi 3 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+
+			ldo1-supply = <&vin>;
+			ldo2-supply = <&vin>;
+			ldo3-supply = <&vin>;
+			ldo4-supply = <&vin>;
+			ldo5-supply = <&vin>;
+			ldo6-supply = <&vin>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcpu: buck1 { /* VDD_CPU_1V2 */
+				regulator-name = "vddcpu";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 { /* VDD_DDR_1V35 */
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 { /* VDD_3V3_1V8 */
+				regulator-name = "vdd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vddcore: buck4 { /* VDD_CORE_1V2 */
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_adc: ldo1 { /* VDD_ADC_1V8 */
+				regulator-name = "vdd_adc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			vdd_ldo2: ldo2 { /* LDO2_OUT_1V8 */
+				regulator-name = "vdd_ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vdd_ldo3: ldo3 { /* LDO3_OUT */
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				interrupts = <IT_CURLIM_LDO3 0>;
+			};
+
+			vdd_usb: ldo4 { /* VDD_USB_3V3 */
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdd_sd: ldo5 { /* VDD_SD_3V3_1V8 */
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+			};
+
+			vdd_sd2: ldo6 { /* VDD_SD2_3V3_1V8 */
+				regulator-name = "vdd_sd2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr { /* VREF_DDR_0V675 */
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+			};
+
+			bst_out: boost { /* BST_OUT_5V2 */
+				regulator-name = "bst_out";
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+			};
+
+			vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			};
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c256";	/* ST M24256 */
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+
+	rv3032: rtc@51 {
+		compatible = "microcrystal,rv3032";
+		reg = <0x51>;
+		interrupts-extended = <&gpioi 0 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	eeprom0wl: eeprom@58 {
+		compatible = "st,24256e-wl";	/* ST M24256E WL page of 0x50 */
+		pagesize = <64>;
+		reg = <0x58>;
+	};
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+/* Console UART */
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_b>;
+	pinctrl-1 = <&uart4_sleep_pins_b>;
+	pinctrl-2 = <&uart4_idle_pins_b>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+/* Bluetooth */
+&uart7 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart7_pins_a>;
+	pinctrl-1 = <&uart7_sleep_pins_a>;
+	pinctrl-2 = <&uart7_idle_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "infineon,cyw43439-bt", "brcm,bcm4329-bt";
+		max-speed = <3000000>;
+		device-wakeup-gpios = <&gpiog 9 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpioi 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* SDIO WiFi */
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	bus-width = <4>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	non-removable;
+	st,neg-edge;
+	vmmc-supply = <&vdd>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	brcmf: wifi@1 {	/* muRata 1YN */
+		reg = <1>;
+		compatible = "infineon,cyw43439-fmac", "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpioe>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+/* eMMC */
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
+	bus-width = <8>;
+	mmc-ddr-3_3v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	st,neg-edge;
+	vmmc-supply = <&vdd>;
+	vqmmc-supply = <&vdd>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
new file mode 100644
index 000000000000..8613a6a17ee9
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
@@ -0,0 +1,3509 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&hdp {
+	/omit-if-no-ref/
+	hdp2_gpo: hdp2-pins {
+		function = "gpoval2";
+		pins = "HDP2";
+	};
+};
+
+&pinctrl {
+	/omit-if-no-ref/
+	adc1_ain_pins_a: adc1-ain-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* ADC1_INP2 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ADC1_INP5 */
+				 <STM32_PINMUX('B', 0, ANALOG)>, /* ADC1_INP9 */
+				 <STM32_PINMUX('C', 0, ANALOG)>, /* ADC1_INP10 */
+				 <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1_INP13 */
+				 <STM32_PINMUX('A', 3, ANALOG)>; /* ADC1_INP15 */
+		};
+	};
+
+	/omit-if-no-ref/
+	adc1_in6_pins_a: adc1-in6-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 12, ANALOG)>;
+		};
+	};
+
+	/omit-if-no-ref/
+	adc1_in10_pins_a: adc1-in10-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>;
+		};
+	};
+
+	/omit-if-no-ref/
+	adc12_ain_pins_a: adc12-ain-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */
+				 <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+				 <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */
+				 <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */
+		};
+	};
+
+	/omit-if-no-ref/
+	adc12_ain_pins_b: adc12-ain-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+				 <STM32_PINMUX('F', 13, ANALOG)>; /* ADC2 in2 */
+		};
+	};
+
+	/omit-if-no-ref/
+	adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
+				 <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */
+		};
+	};
+
+	/omit-if-no-ref/
+	cec_pins_a: cec-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 15, AF4)>;
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	cec_sleep_pins_a: cec-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
+		};
+	};
+
+	/omit-if-no-ref/
+	cec_pins_b: cec-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, AF5)>;
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	cec_sleep_pins_b: cec-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */
+		};
+	};
+
+	/omit-if-no-ref/
+	dac_ch1_pins_a: dac-ch1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
+		};
+	};
+
+	/omit-if-no-ref/
+	dac_ch2_pins_a: dac-ch2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
+		};
+	};
+
+	/omit-if-no-ref/
+	dcmi_pins_a: dcmi-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 8,  AF13)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('H', 9,  AF13)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+				 <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
+				 <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */
+				 <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
+				 <STM32_PINMUX('I', 4,  AF13)>,/* DCMI_D5 */
+				 <STM32_PINMUX('B', 8,  AF13)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 6,  AF13)>,/* DCMI_D7 */
+				 <STM32_PINMUX('I', 1,  AF13)>,/* DCMI_D8 */
+				 <STM32_PINMUX('H', 7,  AF13)>,/* DCMI_D9 */
+				 <STM32_PINMUX('I', 3,  AF13)>,/* DCMI_D10 */
+				 <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	dcmi_sleep_pins_a: dcmi-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 8,  ANALOG)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('H', 9,  ANALOG)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+				 <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
+				 <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */
+				 <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
+				 <STM32_PINMUX('I', 4,  ANALOG)>,/* DCMI_D5 */
+				 <STM32_PINMUX('B', 8,  ANALOG)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 6,  ANALOG)>,/* DCMI_D7 */
+				 <STM32_PINMUX('I', 1,  ANALOG)>,/* DCMI_D8 */
+				 <STM32_PINMUX('H', 7,  ANALOG)>,/* DCMI_D9 */
+				 <STM32_PINMUX('I', 3,  ANALOG)>,/* DCMI_D10 */
+				 <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */
+		};
+	};
+
+	/omit-if-no-ref/
+	dcmi_pins_b: dcmi-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4,  AF13)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('C', 6,  AF13)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+				 <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E', 1,  AF13)>,/* DCMI_D3 */
+				 <STM32_PINMUX('E', 11, AF13)>,/* DCMI_D4 */
+				 <STM32_PINMUX('D', 3,  AF13)>,/* DCMI_D5 */
+				 <STM32_PINMUX('E', 13, AF13)>,/* DCMI_D6 */
+				 <STM32_PINMUX('B', 9,  AF13)>;/* DCMI_D7 */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	dcmi_sleep_pins_b: dcmi-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4,  ANALOG)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('C', 6,  ANALOG)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+				 <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E', 1,  ANALOG)>,/* DCMI_D3 */
+				 <STM32_PINMUX('E', 11, ANALOG)>,/* DCMI_D4 */
+				 <STM32_PINMUX('D', 3,  ANALOG)>,/* DCMI_D5 */
+				 <STM32_PINMUX('E', 13, ANALOG)>,/* DCMI_D6 */
+				 <STM32_PINMUX('B', 9,  ANALOG)>;/* DCMI_D7 */
+		};
+	};
+
+	/omit-if-no-ref/
+	dcmi_pins_c: dcmi-2 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4,  AF13)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('A', 9,  AF13)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+				 <STM32_PINMUX('E', 0, AF13)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E', 1, AF13)>,/* DCMI_D3 */
+				 <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
+				 <STM32_PINMUX('I', 4,  AF13)>,/* DCMI_D5 */
+				 <STM32_PINMUX('I', 6,  AF13)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 6,  AF13)>,/* DCMI_D7 */
+				 <STM32_PINMUX('I', 1,  AF13)>,/* DCMI_D8 */
+				 <STM32_PINMUX('H', 7,  AF13)>;/* DCMI_D9 */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	dcmi_sleep_pins_c: dcmi-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4,  ANALOG)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('A', 9,  ANALOG)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+				 <STM32_PINMUX('E', 0, ANALOG)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E', 1, ANALOG)>,/* DCMI_D3 */
+				 <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
+				 <STM32_PINMUX('I', 4,  ANALOG)>,/* DCMI_D5 */
+				 <STM32_PINMUX('I', 6,  ANALOG)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 6,  ANALOG)>,/* DCMI_D7 */
+				 <STM32_PINMUX('I', 1,  ANALOG)>,/* DCMI_D8 */
+				 <STM32_PINMUX('H', 7,  ANALOG)>;/* DCMI_D9 */
+		};
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rgmii_pins_a: rgmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rgmii_sleep_pins_a: rgmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		};
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rgmii_pins_b: rgmii-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rgmii_sleep_pins_b: rgmii-sleep-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		 };
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rgmii_pins_c: rgmii-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('G', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rgmii_sleep_pins_c: rgmii-sleep-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 12, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		};
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rgmii_pins_d: rgmii-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 13, AF11)>,	/* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>,	/* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>,	/* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rgmii_sleep_pins_d: rgmii-sleep-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		};
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rgmii_pins_e: rgmii-4 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>; /* ETH_RGMII_TX_CTL */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rgmii_sleep_pins_e: rgmii-sleep-4 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		};
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rmii_pins_a: rmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, AF0)>,   /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 2, AF11)>,  /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, AF11)>;  /* ETH1_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rmii_sleep_pins_a: rmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 2, ANALOG)>,  /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>,  /* ETH1_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
+		};
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rmii_pins_b: rmii-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 5, AF0)>, /* ETH1_CLK */
+				<STM32_PINMUX('C', 1, AF11)>, /* ETH1_MDC */
+				<STM32_PINMUX('G', 13, AF11)>, /* ETH1_TXD0 */
+				<STM32_PINMUX('G', 14, AF11)>; /* ETH1_TXD1 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH1_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('A', 7, AF11)>, /* ETH1_CRS_DV */
+				<STM32_PINMUX('C', 4, AF11)>, /* ETH1_RXD0 */
+				<STM32_PINMUX('C', 5, AF11)>; /* ETH1_RXD1 */
+			bias-disable;
+		};
+		pins4 {
+			pinmux = <STM32_PINMUX('B', 11, AF11)>; /* ETH1_TX_EN */
+		};
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rmii_sleep_pins_b: rmii-sleep-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */
+				<STM32_PINMUX('A', 7, ANALOG)>, /* ETH1_CRS_DV */
+				<STM32_PINMUX('B', 5, ANALOG)>, /* ETH1_CLK */
+				<STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_TX_EN */
+				<STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */
+				<STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RXD0 */
+				<STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RXD1 */
+				<STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_TXD0 */
+				<STM32_PINMUX('G', 14, ANALOG)>; /* ETH1_TXD1 */
+		};
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rmii_pins_c: rmii-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, AF11)>,  /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 2, AF11)>,  /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, AF11)>;  /* ETH1_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rmii_sleep_pins_c: rmii-sleep-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 2, ANALOG)>,  /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>,  /* ETH1_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
+		};
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rmii_pins_d: rmii-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rmii_sleep_pins_d: rmii-sleep-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */
+		};
+	};
+
+	/omit-if-no-ref/
+	fmc_pins_a: fmc-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+				 <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+				 <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
+				 <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
+				 <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+				 <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+				 <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+				 <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+				 <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+				 <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+				 <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+				 <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+				 <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	fmc_sleep_pins_a: fmc-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
+				 <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
+				 <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */
+				 <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */
+				 <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
+				 <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
+				 <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
+				 <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
+				 <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
+				 <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
+				 <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
+				 <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */
+				 <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */
+		};
+	};
+
+	/omit-if-no-ref/
+	fmc_pins_b: fmc-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+				 <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+				 <STM32_PINMUX('B', 7, AF12)>, /* FMC_NL */
+				 <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+				 <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+				 <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+				 <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+				 <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+				 <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+				 <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+				 <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+				 <STM32_PINMUX('E', 11, AF12)>, /* FMC_D8 */
+				 <STM32_PINMUX('E', 12, AF12)>, /* FMC_D9 */
+				 <STM32_PINMUX('E', 13, AF12)>, /* FMC_D10 */
+				 <STM32_PINMUX('E', 14, AF12)>, /* FMC_D11 */
+				 <STM32_PINMUX('E', 15, AF12)>, /* FMC_D12 */
+				 <STM32_PINMUX('D', 8, AF12)>, /* FMC_D13 */
+				 <STM32_PINMUX('D', 9, AF12)>, /* FMC_D14 */
+				 <STM32_PINMUX('D', 10, AF12)>, /* FMC_D15 */
+				 <STM32_PINMUX('G', 9, AF12)>, /* FMC_NE2_FMC_NCE */
+				 <STM32_PINMUX('G', 12, AF12)>; /* FMC_NE4 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+	};
+
+	/omit-if-no-ref/
+	fmc_sleep_pins_b: fmc-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
+				 <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
+				 <STM32_PINMUX('B', 7, ANALOG)>, /* FMC_NL */
+				 <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
+				 <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
+				 <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
+				 <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
+				 <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
+				 <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
+				 <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
+				 <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
+				 <STM32_PINMUX('E', 11, ANALOG)>, /* FMC_D8 */
+				 <STM32_PINMUX('E', 12, ANALOG)>, /* FMC_D9 */
+				 <STM32_PINMUX('E', 13, ANALOG)>, /* FMC_D10 */
+				 <STM32_PINMUX('E', 14, ANALOG)>, /* FMC_D11 */
+				 <STM32_PINMUX('E', 15, ANALOG)>, /* FMC_D12 */
+				 <STM32_PINMUX('D', 8, ANALOG)>, /* FMC_D13 */
+				 <STM32_PINMUX('D', 9, ANALOG)>, /* FMC_D14 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* FMC_D15 */
+				 <STM32_PINMUX('G', 9, ANALOG)>, /* FMC_NE2_FMC_NCE */
+				 <STM32_PINMUX('G', 12, ANALOG)>; /* FMC_NE4 */
+		};
+	};
+
+	/omit-if-no-ref/
+	hdp2_pins_a: hdp2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 13, AF0)>; /* HDP2 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+	};
+
+	/omit-if-no-ref/
+	hdp2_sleep_pins_a: hdp2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 13, ANALOG)>; /* HDP2 */
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c1_pins_a: i2c1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c1_sleep_pins_a: i2c1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c1_pins_b: i2c1-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c1_sleep_pins_b: i2c1-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c1_pins_c: i2c1-2 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c1_sleep_pins_c: i2c1-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c2_pins_a: i2c2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
+				 <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c2_sleep_pins_a: i2c2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */
+				 <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c2_pins_b1: i2c2-1 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c2_sleep_pins_b1: i2c2-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c2_pins_c: i2c2-2 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 1, AF4)>, /* I2C2_SCL */
+				 <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c2_pins_sleep_c: i2c2-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 1, ANALOG)>, /* I2C2_SCL */
+				 <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c5_pins_a: i2c5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
+				 <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c5_sleep_pins_a: i2c5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */
+				 <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */
+
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c5_pins_b: i2c5-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 0, AF4)>, /* I2C5_SCL */
+				 <STM32_PINMUX('D', 1, AF4)>; /* I2C5_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c5_sleep_pins_b: i2c5-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 0, ANALOG)>, /* I2C5_SCL */
+				 <STM32_PINMUX('D', 1, ANALOG)>; /* I2C5_SDA */
+		};
+	};
+
+	/omit-if-no-ref/
+	i2s1_pins_a: i2s1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 6, AF5)>, /* I2S2_SDI */
+				 <STM32_PINMUX('A', 4, AF5)>, /* I2S2_WS */
+				 <STM32_PINMUX('A', 5, AF5)>; /* I2S2_CK */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2s1_sleep_pins_a: i2s1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 6, ANALOG)>, /* I2S2_SDI */
+				 <STM32_PINMUX('A', 4, ANALOG)>, /* I2S2_WS */
+				 <STM32_PINMUX('A', 5, ANALOG)>; /* I2S2_CK */
+		};
+	};
+
+	/omit-if-no-ref/
+	i2s2_pins_a: i2s2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */
+				 <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */
+				 <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2s2_sleep_pins_a: i2s2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */
+				 <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */
+		};
+	};
+
+	/omit-if-no-ref/
+	i2s2_pins_b: i2s2-1 {
+		pins {
+			pinmux = <STM32_PINMUX('C',  3, AF5)>, /* I2S2_SDO */
+				 <STM32_PINMUX('B', 12, AF5)>, /* I2S2_WS */
+				 <STM32_PINMUX('B', 13, AF5)>; /* I2S2_CK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2s2_sleep_pins_b: i2s2-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* I2S2_SDO */
+				 <STM32_PINMUX('B', 12, ANALOG)>, /* I2S2_WS */
+				 <STM32_PINMUX('B', 13, ANALOG)>; /* I2S2_CK */
+		};
+	};
+
+	/omit-if-no-ref/
+	ltdc_pins_a: ltdc-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G',  7, AF14)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I',  9, AF14)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */
+				 <STM32_PINMUX('H',  2, AF14)>, /* LCD_R0 */
+				 <STM32_PINMUX('H',  3, AF14)>, /* LCD_R1 */
+				 <STM32_PINMUX('H',  8, AF14)>, /* LCD_R2 */
+				 <STM32_PINMUX('H',  9, AF14)>, /* LCD_R3 */
+				 <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */
+				 <STM32_PINMUX('C',  0, AF14)>, /* LCD_R5 */
+				 <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
+				 <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
+				 <STM32_PINMUX('E',  5, AF14)>, /* LCD_G0 */
+				 <STM32_PINMUX('E',  6, AF14)>, /* LCD_G1 */
+				 <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+				 <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */
+				 <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
+				 <STM32_PINMUX('I',  0, AF14)>, /* LCD_G5 */
+				 <STM32_PINMUX('I',  1, AF14)>, /* LCD_G6 */
+				 <STM32_PINMUX('I',  2, AF14)>, /* LCD_G7 */
+				 <STM32_PINMUX('D',  9, AF14)>, /* LCD_B0 */
+				 <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
+				 <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
+				 <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
+				 <STM32_PINMUX('I',  4, AF14)>, /* LCD_B4 */
+				 <STM32_PINMUX('A',  3, AF14)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  8, AF14)>, /* LCD_B6 */
+				 <STM32_PINMUX('D',  8, AF14)>; /* LCD_B7 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	/omit-if-no-ref/
+	ltdc_sleep_pins_a: ltdc-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G',  7, ANALOG)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I',  9, ANALOG)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */
+				 <STM32_PINMUX('H',  2, ANALOG)>, /* LCD_R0 */
+				 <STM32_PINMUX('H',  3, ANALOG)>, /* LCD_R1 */
+				 <STM32_PINMUX('H',  8, ANALOG)>, /* LCD_R2 */
+				 <STM32_PINMUX('H',  9, ANALOG)>, /* LCD_R3 */
+				 <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */
+				 <STM32_PINMUX('C',  0, ANALOG)>, /* LCD_R5 */
+				 <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
+				 <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
+				 <STM32_PINMUX('E',  5, ANALOG)>, /* LCD_G0 */
+				 <STM32_PINMUX('E',  6, ANALOG)>, /* LCD_G1 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+				 <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */
+				 <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
+				 <STM32_PINMUX('I',  0, ANALOG)>, /* LCD_G5 */
+				 <STM32_PINMUX('I',  1, ANALOG)>, /* LCD_G6 */
+				 <STM32_PINMUX('I',  2, ANALOG)>, /* LCD_G7 */
+				 <STM32_PINMUX('D',  9, ANALOG)>, /* LCD_B0 */
+				 <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
+				 <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
+				 <STM32_PINMUX('I',  4, ANALOG)>, /* LCD_B4 */
+				 <STM32_PINMUX('A',  3, ANALOG)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  8, ANALOG)>, /* LCD_B6 */
+				 <STM32_PINMUX('D',  8, ANALOG)>; /* LCD_B7 */
+		};
+	};
+
+	/omit-if-no-ref/
+	ltdc_pins_b: ltdc-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('K',  7, AF14)>, /* LCD_DE */
+				 <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
+				 <STM32_PINMUX('J',  0, AF14)>, /* LCD_R1 */
+				 <STM32_PINMUX('J',  1, AF14)>, /* LCD_R2 */
+				 <STM32_PINMUX('J',  2, AF14)>, /* LCD_R3 */
+				 <STM32_PINMUX('J',  3, AF14)>, /* LCD_R4 */
+				 <STM32_PINMUX('J',  4, AF14)>, /* LCD_R5 */
+				 <STM32_PINMUX('J',  5, AF14)>, /* LCD_R6 */
+				 <STM32_PINMUX('J',  6, AF14)>, /* LCD_R7 */
+				 <STM32_PINMUX('J',  7, AF14)>, /* LCD_G0 */
+				 <STM32_PINMUX('J',  8, AF14)>, /* LCD_G1 */
+				 <STM32_PINMUX('J',  9, AF14)>, /* LCD_G2 */
+				 <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
+				 <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
+				 <STM32_PINMUX('K',  0, AF14)>, /* LCD_G5 */
+				 <STM32_PINMUX('K',  1, AF14)>, /* LCD_G6 */
+				 <STM32_PINMUX('K',  2, AF14)>, /* LCD_G7 */
+				 <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
+				 <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
+				 <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
+				 <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */
+				 <STM32_PINMUX('K',  3, AF14)>, /* LCD_B4 */
+				 <STM32_PINMUX('K',  4, AF14)>, /* LCD_B5 */
+				 <STM32_PINMUX('K',  5, AF14)>, /* LCD_B6 */
+				 <STM32_PINMUX('K',  6, AF14)>; /* LCD_B7 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	/omit-if-no-ref/
+	ltdc_sleep_pins_b: ltdc-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('K',  7, ANALOG)>, /* LCD_DE */
+				 <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */
+				 <STM32_PINMUX('J',  0, ANALOG)>, /* LCD_R1 */
+				 <STM32_PINMUX('J',  1, ANALOG)>, /* LCD_R2 */
+				 <STM32_PINMUX('J',  2, ANALOG)>, /* LCD_R3 */
+				 <STM32_PINMUX('J',  3, ANALOG)>, /* LCD_R4 */
+				 <STM32_PINMUX('J',  4, ANALOG)>, /* LCD_R5 */
+				 <STM32_PINMUX('J',  5, ANALOG)>, /* LCD_R6 */
+				 <STM32_PINMUX('J',  6, ANALOG)>, /* LCD_R7 */
+				 <STM32_PINMUX('J',  7, ANALOG)>, /* LCD_G0 */
+				 <STM32_PINMUX('J',  8, ANALOG)>, /* LCD_G1 */
+				 <STM32_PINMUX('J',  9, ANALOG)>, /* LCD_G2 */
+				 <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */
+				 <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */
+				 <STM32_PINMUX('K',  0, ANALOG)>, /* LCD_G5 */
+				 <STM32_PINMUX('K',  1, ANALOG)>, /* LCD_G6 */
+				 <STM32_PINMUX('K',  2, ANALOG)>, /* LCD_G7 */
+				 <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */
+				 <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */
+				 <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */
+				 <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */
+				 <STM32_PINMUX('K',  3, ANALOG)>, /* LCD_B4 */
+				 <STM32_PINMUX('K',  4, ANALOG)>, /* LCD_B5 */
+				 <STM32_PINMUX('K',  5, ANALOG)>, /* LCD_B6 */
+				 <STM32_PINMUX('K',  6, ANALOG)>; /* LCD_B7 */
+		};
+	};
+
+	/omit-if-no-ref/
+	ltdc_pins_c: ltdc-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B',  1, AF9)>,  /* LTDC_R6 */
+				 <STM32_PINMUX('B',  9, AF14)>, /* LTDC_B7 */
+				 <STM32_PINMUX('C',  0, AF14)>, /* LTDC_R5 */
+				 <STM32_PINMUX('D',  3, AF14)>, /* LTDC_G7 */
+				 <STM32_PINMUX('D',  6, AF14)>, /* LTDC_B2 */
+				 <STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */
+				 <STM32_PINMUX('E', 11, AF14)>, /* LTDC_G3 */
+				 <STM32_PINMUX('E', 12, AF14)>, /* LTDC_B4 */
+				 <STM32_PINMUX('E', 13, AF14)>, /* LTDC_DE */
+				 <STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */
+				 <STM32_PINMUX('H',  4, AF9)>,  /* LTDC_G5 */
+				 <STM32_PINMUX('H',  8, AF14)>, /* LTDC_R2 */
+				 <STM32_PINMUX('H',  9, AF14)>, /* LTDC_R3 */
+				 <STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */
+				 <STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */
+				 <STM32_PINMUX('H', 15, AF14)>, /* LTDC_G4 */
+				 <STM32_PINMUX('I',  1, AF14)>, /* LTDC_G6 */
+				 <STM32_PINMUX('I',  5, AF14)>, /* LTDC_B5 */
+				 <STM32_PINMUX('I',  6, AF14)>, /* LTDC_B6 */
+				 <STM32_PINMUX('I',  9, AF14)>, /* LTDC_VSYNC */
+				 <STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 14, AF14)>; /* LTDC_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	/omit-if-no-ref/
+	ltdc_sleep_pins_c: ltdc-sleep-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 1, ANALOG)>,  /* LTDC_R6 */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* LTDC_B7 */
+				 <STM32_PINMUX('C', 0, ANALOG)>, /* LTDC_R5 */
+				 <STM32_PINMUX('D', 3, ANALOG)>, /* LTDC_G7 */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* LTDC_B2 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* LTDC_B3 */
+				 <STM32_PINMUX('E', 11, ANALOG)>, /* LTDC_G3 */
+				 <STM32_PINMUX('E', 12, ANALOG)>, /* LTDC_B4 */
+				 <STM32_PINMUX('E', 13, ANALOG)>, /* LTDC_DE */
+				 <STM32_PINMUX('E', 15, ANALOG)>, /* LTDC_R7 */
+				 <STM32_PINMUX('H', 4, ANALOG)>,  /* LTDC_G5 */
+				 <STM32_PINMUX('H', 8, ANALOG)>, /* LTDC_R2 */
+				 <STM32_PINMUX('H', 9, ANALOG)>, /* LTDC_R3 */
+				 <STM32_PINMUX('H', 10, ANALOG)>, /* LTDC_R4 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* LTDC_G2 */
+				 <STM32_PINMUX('H', 15, ANALOG)>, /* LTDC_G4 */
+				 <STM32_PINMUX('I', 1, ANALOG)>, /* LTDC_G6 */
+				 <STM32_PINMUX('I', 5, ANALOG)>, /* LTDC_B5 */
+				 <STM32_PINMUX('I', 6, ANALOG)>, /* LTDC_B6 */
+				 <STM32_PINMUX('I', 9, ANALOG)>, /* LTDC_VSYNC */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* LTDC_HSYNC */
+				 <STM32_PINMUX('E', 14, ANALOG)>; /* LTDC_CLK */
+		};
+	};
+
+	/omit-if-no-ref/
+	ltdc_pins_d: ltdc-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G',  7, AF14)>; /* LCD_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I',  9, AF14)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('E', 13, AF14)>, /* LCD_DE */
+				 <STM32_PINMUX('G', 13, AF14)>, /* LCD_R0 */
+				 <STM32_PINMUX('H',  3, AF14)>, /* LCD_R1 */
+				 <STM32_PINMUX('H',  8, AF14)>, /* LCD_R2 */
+				 <STM32_PINMUX('H',  9, AF14)>, /* LCD_R3 */
+				 <STM32_PINMUX('A',  5, AF14)>, /* LCD_R4 */
+				 <STM32_PINMUX('H', 11, AF14)>, /* LCD_R5 */
+				 <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
+				 <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
+				 <STM32_PINMUX('E',  5, AF14)>, /* LCD_G0 */
+				 <STM32_PINMUX('B',  0, AF14)>, /* LCD_G1 */
+				 <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+				 <STM32_PINMUX('E', 11, AF14)>, /* LCD_G3 */
+				 <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
+				 <STM32_PINMUX('H',  4,  AF9)>, /* LCD_G5 */
+				 <STM32_PINMUX('I', 11,  AF9)>, /* LCD_G6 */
+				 <STM32_PINMUX('G',  8, AF14)>, /* LCD_G7 */
+				 <STM32_PINMUX('D',  9, AF14)>, /* LCD_B0 */
+				 <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
+				 <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
+				 <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
+				 <STM32_PINMUX('E', 12, AF14)>, /* LCD_B4 */
+				 <STM32_PINMUX('A',  3, AF14)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  8, AF14)>, /* LCD_B6 */
+				 <STM32_PINMUX('I',  7, AF14)>; /* LCD_B7 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+	};
+
+	/omit-if-no-ref/
+	ltdc_sleep_pins_d: ltdc-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('G',  7, ANALOG)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I',  9, ANALOG)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('E', 13, ANALOG)>, /* LCD_DE */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* LCD_R0 */
+				 <STM32_PINMUX('H',  3, ANALOG)>, /* LCD_R1 */
+				 <STM32_PINMUX('H',  8, ANALOG)>, /* LCD_R2 */
+				 <STM32_PINMUX('H',  9, ANALOG)>, /* LCD_R3 */
+				 <STM32_PINMUX('A',  5, ANALOG)>, /* LCD_R4 */
+				 <STM32_PINMUX('H', 11, ANALOG)>, /* LCD_R5 */
+				 <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
+				 <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
+				 <STM32_PINMUX('E',  5, ANALOG)>, /* LCD_G0 */
+				 <STM32_PINMUX('B',  0, ANALOG)>, /* LCD_G1 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+				 <STM32_PINMUX('E', 11, ANALOG)>, /* LCD_G3 */
+				 <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
+				 <STM32_PINMUX('H',  4, ANALOG)>, /* LCD_G5 */
+				 <STM32_PINMUX('I', 11, ANALOG)>, /* LCD_G6 */
+				 <STM32_PINMUX('G',  8, ANALOG)>, /* LCD_G7 */
+				 <STM32_PINMUX('D',  9, ANALOG)>, /* LCD_B0 */
+				 <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
+				 <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
+				 <STM32_PINMUX('E', 12, ANALOG)>, /* LCD_B4 */
+				 <STM32_PINMUX('A',  3, ANALOG)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  8, ANALOG)>, /* LCD_B6 */
+				 <STM32_PINMUX('I',  7, ANALOG)>; /* LCD_B7 */
+		};
+	};
+
+	/omit-if-no-ref/
+	ltdc_pins_e: ltdc-4 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H',  2, AF14)>, /* LTDC_R0 */
+				 <STM32_PINMUX('H',  3, AF14)>, /* LTDC_R1 */
+				 <STM32_PINMUX('H',  8, AF14)>, /* LTDC_R2 */
+				 <STM32_PINMUX('H',  9, AF14)>, /* LTDC_R3 */
+				 <STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */
+				 <STM32_PINMUX('C',  0, AF14)>, /* LTDC_R5 */
+				 <STM32_PINMUX('H', 12, AF14)>, /* LTDC_R6 */
+				 <STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */
+				 <STM32_PINMUX('E', 14, AF13)>, /* LTDC_G0 */
+				 <STM32_PINMUX('E',  6, AF14)>, /* LTDC_G1 */
+				 <STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */
+				 <STM32_PINMUX('H', 14, AF14)>, /* LTDC_G3 */
+				 <STM32_PINMUX('H',  4, AF14)>, /* LTDC_G4 */
+				 <STM32_PINMUX('I',  0, AF14)>, /* LTDC_G5 */
+				 <STM32_PINMUX('I',  1, AF14)>, /* LTDC_G6 */
+				 <STM32_PINMUX('I',  2, AF14)>, /* LTDC_G7 */
+				 <STM32_PINMUX('D',  9, AF14)>, /* LTDC_B0 */
+				 <STM32_PINMUX('G', 12, AF14)>, /* LTDC_B1 */
+				 <STM32_PINMUX('G', 10, AF14)>, /* LTDC_B2 */
+				 <STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */
+				 <STM32_PINMUX('E', 12, AF14)>, /* LTDC_B4 */
+				 <STM32_PINMUX('A',  3, AF14)>, /* LTDC_B5 */
+				 <STM32_PINMUX('B',  8, AF14)>, /* LTDC_B6 */
+				 <STM32_PINMUX('D',  8, AF14)>, /* LTDC_B7 */
+				 <STM32_PINMUX('F', 10, AF14)>, /* LTDC_DE */
+				 <STM32_PINMUX('I',  9, AF14)>, /* LTDC_VSYNC */
+				 <STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 7, AF14)>; /* LTDC_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	/omit-if-no-ref/
+	ltdc_sleep_pins_e: ltdc-sleep-4 {
+		pins {
+			pinmux = <STM32_PINMUX('H',  2, ANALOG)>, /* LTDC_R0 */
+				 <STM32_PINMUX('H',  3, ANALOG)>, /* LTDC_R1 */
+				 <STM32_PINMUX('H',  8, ANALOG)>, /* LTDC_R2 */
+				 <STM32_PINMUX('H',  9, ANALOG)>, /* LTDC_R3 */
+				 <STM32_PINMUX('H', 10, ANALOG)>, /* LTDC_R4 */
+				 <STM32_PINMUX('C',  0, ANALOG)>, /* LTDC_R5 */
+				 <STM32_PINMUX('H', 12, ANALOG)>, /* LTDC_R6 */
+				 <STM32_PINMUX('E', 15, ANALOG)>, /* LTDC_R7 */
+				 <STM32_PINMUX('D',  9, ANALOG)>, /* LTDC_B0 */
+				 <STM32_PINMUX('G', 12, ANALOG)>, /* LTDC_B1 */
+				 <STM32_PINMUX('G', 10, ANALOG)>, /* LTDC_B2 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* LTDC_B3 */
+				 <STM32_PINMUX('E', 12, ANALOG)>, /* LTDC_B4 */
+				 <STM32_PINMUX('A',  3, ANALOG)>, /* LTDC_B5 */
+				 <STM32_PINMUX('B',  8, ANALOG)>, /* LTDC_B6 */
+				 <STM32_PINMUX('D',  8, ANALOG)>, /* LTDC_B7 */
+				 <STM32_PINMUX('E', 14, ANALOG)>, /* LTDC_G0 */
+				 <STM32_PINMUX('E',  6, ANALOG)>, /* LTDC_G1 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* LTDC_G2 */
+				 <STM32_PINMUX('H', 14, ANALOG)>, /* LTDC_G3 */
+				 <STM32_PINMUX('H',  4, ANALOG)>, /* LTDC_G4 */
+				 <STM32_PINMUX('I',  0, ANALOG)>, /* LTDC_G5 */
+				 <STM32_PINMUX('I',  1, ANALOG)>, /* LTDC_G6 */
+				 <STM32_PINMUX('I',  2, ANALOG)>, /* LTDC_G7 */
+				 <STM32_PINMUX('F', 10, ANALOG)>, /* LTDC_DE */
+				 <STM32_PINMUX('I',  9, ANALOG)>, /* LTDC_VSYNC */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* LTDC_HSYNC */
+				 <STM32_PINMUX('G',  7, ANALOG)>; /* LTDC_CLK */
+		};
+	};
+
+	/omit-if-no-ref/
+	m4_leds_orange_pins_a: m4-leds-orange-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 7, RSVD)>;
+		};
+	};
+
+	/omit-if-no-ref/
+	m4_leds_orange_pins_b: m4-leds-orange-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 8, RSVD)>;
+		};
+	};
+
+	/omit-if-no-ref/
+	mco1_pins_a: mco1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 13, AF2)>; /* MCO1 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	/omit-if-no-ref/
+	mco1_sleep_pins_a: mco1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 13, ANALOG)>; /* MCO1 */
+		};
+	};
+
+	/omit-if-no-ref/
+	mco2_pins_a: mco2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+	};
+
+	/omit-if-no-ref/
+	mco2_sleep_pins_a: mco2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 2, ANALOG)>; /* MCO2 */
+		};
+	};
+
+	/omit-if-no-ref/
+	m_can1_pins_a: m-can1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	m_can1_sleep_pins_a: m_can1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
+				 <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	m_can1_pins_b: m-can1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	m_can1_sleep_pins_b: m_can1-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 12, ANALOG)>, /* CAN1_TX */
+				 <STM32_PINMUX('A', 11, ANALOG)>; /* CAN1_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	m_can1_pins_c: m-can1-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	m_can1_sleep_pins_c: m_can1-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
+				 <STM32_PINMUX('H', 14, ANALOG)>; /* CAN1_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	m_can1_pins_d: m-can1-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 1, AF9)>; /* CAN1_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	m_can1_sleep_pins_d: m_can1-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* CAN1_TX */
+				 <STM32_PINMUX('D', 0, ANALOG)>; /* CAN1_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	m_can2_pins_a: m-can2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	m_can2_sleep_pins_a: m_can2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 13, ANALOG)>, /* CAN2_TX */
+				 <STM32_PINMUX('B', 5, ANALOG)>; /* CAN2_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm1_pins_a: pwm1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */
+				 <STM32_PINMUX('E', 11, AF1)>, /* TIM1_CH2 */
+				 <STM32_PINMUX('E', 14, AF1)>; /* TIM1_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm1_sleep_pins_a: pwm1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, ANALOG)>, /* TIM1_CH1 */
+				 <STM32_PINMUX('E', 11, ANALOG)>, /* TIM1_CH2 */
+				 <STM32_PINMUX('E', 14, ANALOG)>; /* TIM1_CH4 */
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm1_pins_b: pwm1-1 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, AF1)>; /* TIM1_CH1 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm1_sleep_pins_b: pwm1-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, ANALOG)>; /* TIM1_CH1 */
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm1_pins_c: pwm1-2 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 11, AF1)>; /* TIM1_CH2 */
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm1_sleep_pins_c: pwm1-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 11, ANALOG)>; /* TIM1_CH2 */
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm1_pins_d: pwm1-3 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm1_sleep_pins_d: pwm1-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 0, ANALOG)>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm2_pins_a: pwm2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm2_sleep_pins_a: pwm2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* TIM2_CH4 */
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm3_pins_a: pwm3-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 7, AF2)>; /* TIM3_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm3_sleep_pins_a: pwm3-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 7, ANALOG)>; /* TIM3_CH2 */
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm3_pins_b: pwm3-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm3_sleep_pins_b: pwm3-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* TIM3_CH2 */
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm4_pins_a: pwm4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */
+				 <STM32_PINMUX('D', 15, AF2)>; /* TIM4_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm4_sleep_pins_a: pwm4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 14, ANALOG)>, /* TIM4_CH3 */
+				 <STM32_PINMUX('D', 15, ANALOG)>; /* TIM4_CH4 */
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm4_pins_b: pwm4-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm4_sleep_pins_b: pwm4-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm5_pins_a: pwm5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 11, AF2)>; /* TIM5_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm5_sleep_pins_a: pwm5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 11, ANALOG)>; /* TIM5_CH2 */
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm5_pins_b: pwm5-1 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 11, AF2)>, /* TIM5_CH2 */
+				 <STM32_PINMUX('H', 12, AF2)>, /* TIM5_CH3 */
+				 <STM32_PINMUX('I', 0, AF2)>; /* TIM5_CH4 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm5_sleep_pins_b: pwm5-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 11, ANALOG)>, /* TIM5_CH2 */
+				 <STM32_PINMUX('H', 12, ANALOG)>, /* TIM5_CH3 */
+				 <STM32_PINMUX('I', 0, ANALOG)>; /* TIM5_CH4 */
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm8_pins_a: pwm8-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm8_sleep_pins_a: pwm8-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 2, ANALOG)>; /* TIM8_CH4 */
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm8_pins_b: pwm8-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, AF3)>, /* TIM8_CH1 */
+				 <STM32_PINMUX('I', 6, AF3)>, /* TIM8_CH2 */
+				 <STM32_PINMUX('I', 7, AF3)>, /* TIM8_CH3 */
+				 <STM32_PINMUX('C', 9, AF3)>; /* TIM8_CH4 */
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm8_sleep_pins_b: pwm8-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* TIM8_CH1 */
+				 <STM32_PINMUX('I', 6, ANALOG)>, /* TIM8_CH2 */
+				 <STM32_PINMUX('I', 7, ANALOG)>, /* TIM8_CH3 */
+				 <STM32_PINMUX('C', 9, ANALOG)>; /* TIM8_CH4 */
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm12_pins_a: pwm12-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm12_sleep_pins_a: pwm12-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 6, ANALOG)>; /* TIM12_CH1 */
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_clk_pins_a: qspi-clk-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_bk1_pins_a: qspi-bk1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('F', 6, ANALOG)>; /* QSPI_BK1_IO3 */
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_bk2_pins_a: qspi-bk2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
+				 <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
+				 <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
+				 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
+				 <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
+				 <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
+				 <STM32_PINMUX('G', 7, ANALOG)>; /* QSPI_BK2_IO3 */
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_cs1_pins_a: qspi-cs1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_cs1_sleep_pins_a: qspi-cs1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_cs2_pins_a: qspi-cs2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_cs2_sleep_pins_a: qspi-cs2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
+		};
+	};
+
+	/omit-if-no-ref/
+	rtc_rsvd_pins_a: rtc-rsvd-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 8, ANALOG)>; /* RTC_OUT2_RMP */
+		};
+	};
+
+	/omit-if-no-ref/
+	sai2a_pins_a: sai2a-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
+				 <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sai2a_sleep_pins_a: sai2a-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
+				 <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
+		};
+	};
+
+	/omit-if-no-ref/
+	sai2a_pins_b: sai2a-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('I', 6, AF10)>,	/* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, AF10)>,	/* SAI2_FS_A */
+				 <STM32_PINMUX('D', 13, AF10)>;	/* SAI2_SCK_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sai2a_sleep_pins_b: sai2a-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 6, ANALOG)>,  /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, ANALOG)>,  /* SAI2_FS_A */
+				 <STM32_PINMUX('D', 13, ANALOG)>; /* SAI2_SCK_A */
+		};
+	};
+
+	/omit-if-no-ref/
+	sai2a_pins_c: sai2a-2 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('D', 12, AF10)>; /* SAI2_FS_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sai2a_sleep_pins_c: sai2a-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('D', 12, ANALOG)>; /* SAI2_FS_A */
+		};
+	};
+
+	/omit-if-no-ref/
+	sai2b_pins_a: sai2b-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
+				 <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */
+				 <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sai2b_sleep_pins_a: sai2b-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */
+				 <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */
+				 <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */
+				 <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */
+		};
+	};
+
+	/omit-if-no-ref/
+	sai2b_pins_b: sai2b-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sai2b_sleep_pins_b: sai2b-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
+		};
+	};
+
+	/omit-if-no-ref/
+	sai2b_pins_c: sai2b-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sai2b_sleep_pins_c: sai2b-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
+		};
+	};
+
+	/omit-if-no-ref/
+	sai2b_pins_d: sai2b-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 2, AF10)>, /* SAI2_SCK_B */
+				 <STM32_PINMUX('C', 0, AF8)>, /* SAI2_FS_B */
+				 <STM32_PINMUX('H', 3, AF10)>; /* SAI2_MCLK_B */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sai2b_sleep_pins_d: sai2b-sleep-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* SAI2_SCK_B */
+				 <STM32_PINMUX('C', 0, ANALOG)>, /* SAI2_FS_B */
+				 <STM32_PINMUX('H', 3, ANALOG)>, /* SAI2_MCLK_B */
+				 <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
+		};
+	};
+
+	/omit-if-no-ref/
+	sai4a_pins_a: sai4a-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sai4a_sleep_pins_a: sai4a-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc1_b4_init_pins_a: sdmmc1-b4-init-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc1_b4_pins_b: sdmmc1-b4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('E', 6, AF8)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc1_b4_od_pins_b: sdmmc1-b4-od-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('E', 6, AF8)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc1_b4_sleep_pins_b: sdmmc1-b4-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('E', 6, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc1_dir_init_pins_a: sdmmc1-dir-init-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+				 <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc1_dir_pins_b: sdmmc1-dir-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('E', 14, AF11)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc1_dir_sleep_pins_b: sdmmc1-dir-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('E', 14, ANALOG)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+				 <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+				 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_b4_pins_b: sdmmc2-b4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_b4_od_pins_b: sdmmc2-b4-od-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_b4_pins_c: sdmmc2-b4-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_b4_od_pins_c: sdmmc2-b4-od-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+
+		pins3 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_b4_sleep_pins_c: sdmmc2-b4-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+				 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_d47_pins_a: sdmmc2-d47-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_d47_pins_b: sdmmc2-d47-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>,  /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_d47_sleep_pins_b: sdmmc2-d47-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_d47_pins_c: sdmmc2-d47-2 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 15, AF9)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_d47_sleep_pins_c: sdmmc2-d47-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 15, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_d47_pins_d: sdmmc2-d47-3 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_d47_sleep_pins_d: sdmmc2-d47-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_d47_pins_e: sdmmc2-d47-4 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>,	/* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, AF10)>,	/* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, AF10)>,	/* SDMMC2_D6 */
+				 <STM32_PINMUX('D', 3, AF9)>;	/* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_d47_sleep_pins_e: sdmmc2-d47-sleep-4 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc3_b4_pins_a: sdmmc3-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('F', 1, AF9)>; /* SDMMC3_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc3_b4_od_pins_a: sdmmc3-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('F', 1, AF9)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc3_b4_sleep_pins_a: sdmmc3-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('F', 5, ANALOG)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+				 <STM32_PINMUX('F', 1, ANALOG)>; /* SDMMC3_CMD */
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc3_b4_pins_b: sdmmc3-b4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc3_b4_od_pins_b: sdmmc3-b4-od-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 0, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc3_b4_sleep_pins_b: sdmmc3-b4-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+				 <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc3_b4_pins_c: sdmmc3-b4-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc3_b4_od_pins_c: sdmmc3-b4-od-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc3_b4_sleep_pins_c: sdmmc3-b4-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+				 <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
+		};
+	};
+
+	/omit-if-no-ref/
+	spdifrx_pins_a: spdifrx-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	spdifrx_sleep_pins_a: spdifrx-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */
+		};
+	};
+
+	/omit-if-no-ref/
+	spi1_pins_b: spi1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
+				 <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	spi2_pins_a: spi2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
+				 <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	spi2_pins_b: spi2-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('I', 1, AF5)>, /* SPI2_SCK */
+				 <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	spi2_pins_c: spi2-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('I', 1, AF5)>, /* SPI2_SCK */
+				 <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
+			bias-disable;
+			drive-push-pull;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
+			bias-pull-down;
+		};
+	};
+
+	/omit-if-no-ref/
+	spi4_pins_a: spi4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
+				 <STM32_PINMUX('E', 6, AF5)>;  /* SPI4_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	spi5_pins_a: spi5-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, AF5)>, /* SPI5_SCK */
+				 <STM32_PINMUX('F', 9, AF5)>; /* SPI5_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 8, AF5)>; /* SPI5_MISO */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	stusb1600_pins_a: stusb1600-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 11, GPIO)>;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_pins_a: uart4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_idle_pins_a: uart4-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_sleep_pins_a: uart4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
+				 <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_pins_b: uart4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_pins_c: uart4-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_pins_d: uart4-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 13, AF8)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_idle_pins_d: uart4-idle-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 13, ANALOG)>; /* UART4_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_sleep_pins_d: uart4-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 13, ANALOG)>, /* UART4_TX */
+				 <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_pins_e: uart4-4 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 8, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_idle_pins_e: uart4-idle-4 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 8, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_sleep_pins_e: uart4-sleep-4 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
+				 <STM32_PINMUX('B', 8, ANALOG)>; /* UART4_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	uart5_pins_a: uart5-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 13, AF14)>; /* UART5_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 5, AF12)>; /* UART5_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart7_pins_a: uart7-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART7_RX */
+				 <STM32_PINMUX('E', 10, AF7)>, /* UART7_CTS */
+				 <STM32_PINMUX('E', 9, AF7)>; /* UART7_RTS */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart7_pins_b: uart7-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart7_pins_c: uart7-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart7_idle_pins_c: uart7-idle-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>; /* UART7_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart7_sleep_pins_c: uart7-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>, /* UART7_TX */
+				 <STM32_PINMUX('E', 7, ANALOG)>; /* UART7_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	uart7_pins_d: uart7-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, AF7)>, /* UART7_TX */
+				 <STM32_PINMUX('F', 8, AF7)>; /* UART7_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART7_RX */
+				 <STM32_PINMUX('F', 9, AF7)>; /* UART7_CTS */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart8_pins_a: uart8-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart8_rtscts_pins_a: uart8rtscts-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 7, AF8)>, /* UART8_RTS */
+				 <STM32_PINMUX('G', 10, AF8)>; /* UART8_CTS */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart1_pins_a: usart1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 12, AF7)>; /* USART1_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 11, AF7)>; /* USART1_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart1_idle_pins_a: usart1-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 12, ANALOG)>, /* USART1_RTS */
+				 <STM32_PINMUX('A', 11, AF7)>; /* USART1_CTS_NSS */
+		};
+	};
+
+	/omit-if-no-ref/
+	usart1_sleep_pins_a: usart1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 12, ANALOG)>, /* USART1_RTS */
+				 <STM32_PINMUX('A', 11, ANALOG)>; /* USART1_CTS_NSS */
+		};
+	};
+
+	/omit-if-no-ref/
+	usart2_pins_a: usart2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart2_sleep_pins_a: usart2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
+
+	/omit-if-no-ref/
+	usart2_pins_b: usart2-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
+				 <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 4, AF7)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 15, AF7)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart2_sleep_pins_b: usart2-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
+
+	/omit-if-no-ref/
+	usart2_pins_c: usart2-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 5, AF7)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart2_idle_pins_c: usart2-idle-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart2_sleep_pins_c: usart2-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
+
+	/omit-if-no-ref/
+	usart3_pins_a: usart3-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart3_idle_pins_a: usart3-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>; /* USART3_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart3_sleep_pins_a: usart3-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	usart3_pins_b: usart3-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+				 <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart3_idle_pins_b: usart3-idle-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('I', 10, ANALOG)>; /* USART3_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart3_sleep_pins_b: usart3-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* USART3_CTS_NSS */
+				 <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	usart3_pins_c: usart3-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+				 <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart3_idle_pins_c: usart3-idle-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('B', 13, ANALOG)>; /* USART3_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart3_sleep_pins_c: usart3-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('B', 13, ANALOG)>, /* USART3_CTS_NSS */
+				 <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	usart3_pins_d: usart3-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 9, AF7)>, /* USART3_RX */
+				 <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart3_idle_pins_d: usart3-idle-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('D', 11, ANALOG)>; /* USART3_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 9, AF7)>; /* USART3_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart3_sleep_pins_d: usart3-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('D', 11, ANALOG)>, /* USART3_CTS_NSS */
+				 <STM32_PINMUX('D', 9, ANALOG)>; /* USART3_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	usart3_pins_e: usart3-4 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 11, AF7)>, /* USART3_RX */
+				 <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart3_idle_pins_e: usart3-idle-4 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('D', 11, ANALOG)>; /* USART3_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('B', 11, AF7)>; /* USART3_RX */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart3_sleep_pins_e: usart3-sleep-4 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('D', 11, ANALOG)>, /* USART3_CTS_NSS */
+				 <STM32_PINMUX('B', 11, ANALOG)>; /* USART3_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	usart3_pins_f: usart3-5 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('D', 12, AF7)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+				 <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usbotg_hs_pins_a: usbotg-hs-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
+		};
+	};
+
+	/omit-if-no-ref/
+	usbotg_fs_dp_dm_pins_a: usbotg-fs-dp-dm-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* OTG_FS_DM */
+				 <STM32_PINMUX('A', 12, ANALOG)>; /* OTG_FS_DP */
+		};
+	};
+};
+
+&pinctrl_z {
+	/omit-if-no-ref/
+	i2c2_pins_b2: i2c2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c2_sleep_pins_b2: i2c2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c4_pins_a: i2c4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+				 <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c4_sleep_pins_a: i2c4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
+				 <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c6_pins_a: i2c6-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 6, AF2)>, /* I2C6_SCL */
+				 <STM32_PINMUX('Z', 7, AF2)>; /* I2C6_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c6_sleep_pins_a: i2c6-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 6, ANALOG)>, /* I2C6_SCL */
+				 <STM32_PINMUX('Z', 7, ANALOG)>; /* I2C6_SDA */
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c6_pins_b: i2c6-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, AF2)>, /* I2C6_SCL */
+				 <STM32_PINMUX('A', 12, AF2)>; /* I2C6_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c6_sleep_pins_b: i2c6-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C6_SCL */
+				 <STM32_PINMUX('A', 12, ANALOG)>; /* I2C6_SDA */
+		};
+	};
+
+	/omit-if-no-ref/
+	spi1_pins_a: spi1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
+				 <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	spi1_sleep_pins_a: spi1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 0, ANALOG)>, /* SPI1_SCK */
+				 <STM32_PINMUX('Z', 1, ANALOG)>, /* SPI1_MISO */
+				 <STM32_PINMUX('Z', 2, ANALOG)>; /* SPI1_MOSI */
+		};
+	};
+
+	/omit-if-no-ref/
+	usart1_pins_b: usart1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('Z', 7, AF7)>; /* USART1_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('Z', 6, AF7)>; /* USART1_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart1_idle_pins_b: usart1-idle-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('Z', 7, ANALOG)>; /* USART1_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('Z', 6, AF7)>; /* USART1_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart1_sleep_pins_b: usart1-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 7, ANALOG)>, /* USART1_TX */
+				 <STM32_PINMUX('Z', 6, ANALOG)>; /* USART1_RX */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp15-scmi.dtsi b/arch/arm/boot/dts/st/stm32mp15-scmi.dtsi
index 543f24c2f4f6..98552fe45d4e 100644
--- a/arch/arm/boot/dts/stm32mp15-scmi.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15-scmi.dtsi
@@ -4,11 +4,15 @@
  * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
  */
 
+#include <dt-bindings/regulator/st,stm32mp15-regulator.h>
+
 / {
 	firmware {
 		optee: optee {
 			compatible = "linaro,optee-tz";
 			method = "smc";
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 		};
 
 		scmi: scmi {
@@ -16,7 +20,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			linaro,optee-channel-id = <0>;
-			shmem = <&scmi_shm>;
 
 			scmi_clk: protocol@14 {
 				reg = <0x14>;
@@ -35,23 +38,22 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					scmi_reg11: reg11@0 {
-						reg = <0>;
+					scmi_reg11: regulator@0 {
+						reg = <VOLTD_SCMI_REG11>;
 						regulator-name = "reg11";
 						regulator-min-microvolt = <1100000>;
 						regulator-max-microvolt = <1100000>;
 					};
 
-					scmi_reg18: reg18@1 {
-						voltd-name = "reg18";
-						reg = <1>;
+					scmi_reg18: regulator@1 {
+						reg = <VOLTD_SCMI_REG18>;
 						regulator-name = "reg18";
 						regulator-min-microvolt = <1800000>;
 						regulator-max-microvolt = <1800000>;
 					};
 
-					scmi_usb33: usb33@2 {
-						reg = <2>;
+					scmi_usb33: regulator@2 {
+						reg = <VOLTD_SCMI_USB33>;
 						regulator-name = "usb33";
 						regulator-min-microvolt = <3300000>;
 						regulator-max-microvolt = <3300000>;
@@ -60,21 +62,6 @@
 			};
 		};
 	};
-
-	soc {
-		scmi_sram: sram@2ffff000 {
-			compatible = "mmio-sram";
-			reg = <0x2ffff000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x2ffff000 0x1000>;
-
-			scmi_shm: scmi-sram@0 {
-				compatible = "arm,scmi-shmem";
-				reg = <0 0x80>;
-			};
-		};
-	};
 };
 
 &reg11 {
diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi
new file mode 100644
index 000000000000..b1b568dfd126
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -0,0 +1,2047 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/stm32mp1-clks.h>
+#include <dt-bindings/reset/stm32mp1-resets.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			clock-frequency = <650000000>;
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+		interrupt-parent = <&intc>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	intc: interrupt-controller@a0021000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xa0021000 0x1000>,
+		      <0xa0022000 0x2000>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&intc>;
+		arm,no-tick-in-suspend;
+	};
+
+	clocks {
+		clk_hse: clk-hse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		clk_hsi: clk-hsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <64000000>;
+		};
+
+		clk_lse: clk-lse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		clk_lsi: clk-lsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+		};
+
+		clk_csi: clk-csi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <4000000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&dts>;
+
+			trips {
+				cpu_alert1: cpu-alert1 {
+					temperature = <85000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
+	booster: regulator-booster {
+		compatible = "st,stm32mp1-booster";
+		st,syscfg = <&syscfg>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+
+		ipcc: mailbox@4c001000 {
+			compatible = "st,stm32mp1-ipcc";
+			#mbox-cells = <1>;
+			reg = <0x4c001000 0x400>;
+			st,proc-id = <0>;
+			interrupts-extended =
+				<&exti 61 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "rx", "tx";
+			clocks = <&rcc IPCC>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		rcc: rcc@50000000 {
+			compatible = "st,stm32mp1-rcc", "syscon";
+			reg = <0x50000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pwr_regulators: pwr@50001000 {
+			compatible = "st,stm32mp1,pwr-reg";
+			reg = <0x50001000 0x10>;
+
+			reg11: reg11 {
+				regulator-name = "reg11";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			reg18: reg18 {
+				regulator-name = "reg18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			usb33: usb33 {
+				regulator-name = "usb33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+
+		pwr_mcu: pwr_mcu@50001014 {
+			compatible = "st,stm32mp151-pwr-mcu", "syscon";
+			reg = <0x50001014 0x4>;
+		};
+
+		exti: interrupt-controller@5000d000 {
+			compatible = "st,stm32mp1-exti", "syscon";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x5000d000 0x400>;
+			interrupts-extended =
+				<&intc GIC_SPI 6   IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_0 */
+				<&intc GIC_SPI 7   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 8   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 9   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 10  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 23  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 64  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 65  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 66  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 67  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 40  IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_10 */
+				<&intc GIC_SPI 42  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 76  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 77  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 1   IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 3   IRQ_TYPE_LEVEL_HIGH>,
+				<0>,						/* EXTI_20 */
+				<&intc GIC_SPI 31  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 33  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 72  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 95  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 37  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 38  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 39  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 71  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 52  IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_30 */
+				<&intc GIC_SPI 53  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 82  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 83  IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,						/* EXTI_40 */
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 93  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_50 */
+				<0>,
+				<&intc GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,						/* EXTI_60 */
+				<&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 62  IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_70 */
+				<0>,
+				<0>,
+				<&intc GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		syscfg: syscon@50020000 {
+			compatible = "st,stm32mp157-syscfg", "syscon";
+			reg = <0x50020000 0x400>;
+			clocks = <&rcc SYSCFG>;
+		};
+
+		dts: thermal@50028000 {
+			compatible = "st,stm32-thermal";
+			reg = <0x50028000 0x100>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc TMPSENS>;
+			clock-names = "pclk";
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		hdp: pinctrl@5002a000 {
+			compatible = "st,stm32mp151-hdp";
+			reg = <0x5002a000 0x400>;
+			clocks = <&rcc HDP>;
+			status = "disabled";
+		};
+
+		mdma1: dma-controller@58000000 {
+			compatible = "st,stm32h7-mdma";
+			reg = <0x58000000 0x1000>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc MDMA>;
+			resets = <&rcc MDMA_R>;
+			#dma-cells = <5>;
+			dma-channels = <32>;
+			dma-requests = <48>;
+		};
+
+		sdmmc1: mmc@58005000 {
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00253180>;
+			reg = <0x58005000 0x1000>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SDMMC1_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC1_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
+		sdmmc2: mmc@58007000 {
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00253180>;
+			reg = <0x58007000 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SDMMC2_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC2_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
+		crc1: crc@58009000 {
+			compatible = "st,stm32f7-crc";
+			reg = <0x58009000 0x400>;
+			clocks = <&rcc CRC1>;
+			status = "disabled";
+		};
+
+		usbh_ohci: usb@5800c000 {
+			compatible = "generic-ohci";
+			reg = <0x5800c000 0x1000>;
+			clocks = <&usbphyc>, <&rcc USBH>;
+			resets = <&rcc USBH_R>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphyc_port0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbh_ehci: usb@5800d000 {
+			compatible = "generic-ehci";
+			reg = <0x5800d000 0x1000>;
+			clocks = <&usbphyc>, <&rcc USBH>;
+			resets = <&rcc USBH_R>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			companion = <&usbh_ohci>;
+			phys = <&usbphyc_port0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ltdc: display-controller@5a001000 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x5a001000 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LTDC_PX>;
+			clock-names = "lcd";
+			resets = <&rcc LTDC_R>;
+			status = "disabled";
+		};
+
+		iwdg2: watchdog@5a002000 {
+			compatible = "st,stm32mp1-iwdg";
+			reg = <0x5a002000 0x400>;
+			clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
+			clock-names = "pclk", "lsi";
+			interrupts-extended = <&exti 46 IRQ_TYPE_LEVEL_HIGH>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		usbphyc: usbphyc@5a006000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <0>;
+			compatible = "st,stm32mp1-usbphyc";
+			reg = <0x5a006000 0x1000>;
+			clocks = <&rcc USBPHY_K>;
+			resets = <&rcc USBPHY_R>;
+			vdda1v1-supply = <&reg11>;
+			vdda1v8-supply = <&reg18>;
+			status = "disabled";
+
+			usbphyc_port0: usb-phy@0 {
+				#phy-cells = <0>;
+				reg = <0>;
+			};
+
+			usbphyc_port1: usb-phy@1 {
+				#phy-cells = <1>;
+				reg = <1>;
+			};
+		};
+
+		rtc: rtc@5c004000 {
+			compatible = "st,stm32mp1-rtc";
+			reg = <0x5c004000 0x400>;
+			clocks = <&rcc RTCAPB>, <&rcc RTC>;
+			clock-names = "pclk", "rtc_ck";
+			interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		bsec: efuse@5c005000 {
+			compatible = "st,stm32mp15-bsec";
+			reg = <0x5c005000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			part_number_otp: part-number-otp@4 {
+				reg = <0x4 0x1>;
+			};
+			vrefint: vrefin-cal@52 {
+				reg = <0x52 0x2>;
+			};
+			ts_cal1: calib@5c {
+				reg = <0x5c 0x2>;
+			};
+			ts_cal2: calib@5e {
+				reg = <0x5e 0x2>;
+			};
+		};
+
+		etzpc: bus@5c007000 {
+			compatible = "st,stm32-etzpc", "simple-bus";
+			reg = <0x5c007000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#access-controller-cells = <1>;
+			ranges;
+
+			timers2: timer@40000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x40000000 0x400>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM2_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 18 0x400 0x1>,
+				       <&dmamux1 19 0x400 0x1>,
+				       <&dmamux1 20 0x400 0x1>,
+				       <&dmamux1 21 0x400 0x1>,
+				       <&dmamux1 22 0x400 0x1>;
+				dma-names = "ch1", "ch2", "ch3", "ch4", "up";
+				access-controllers = <&etzpc 16>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@1 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <1>;
+					status = "disabled";
+				};
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+			};
+
+			timers3: timer@40001000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x40001000 0x400>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM3_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 23 0x400 0x1>,
+				       <&dmamux1 24 0x400 0x1>,
+				       <&dmamux1 25 0x400 0x1>,
+				       <&dmamux1 26 0x400 0x1>,
+				       <&dmamux1 27 0x400 0x1>,
+				       <&dmamux1 28 0x400 0x1>;
+				dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
+				access-controllers = <&etzpc 17>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@2 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <2>;
+					status = "disabled";
+				};
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+			};
+
+			timers4: timer@40002000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x40002000 0x400>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM4_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 29 0x400 0x1>,
+				       <&dmamux1 30 0x400 0x1>,
+				       <&dmamux1 31 0x400 0x1>,
+				       <&dmamux1 32 0x400 0x1>;
+				dma-names = "ch1", "ch2", "ch3", "ch4";
+				access-controllers = <&etzpc 18>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@3 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <3>;
+					status = "disabled";
+				};
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+			};
+
+			timers5: timer@40003000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x40003000 0x400>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM5_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 55 0x400 0x1>,
+				       <&dmamux1 56 0x400 0x1>,
+				       <&dmamux1 57 0x400 0x1>,
+				       <&dmamux1 58 0x400 0x1>,
+				       <&dmamux1 59 0x400 0x1>,
+				       <&dmamux1 60 0x400 0x1>;
+				dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
+				access-controllers = <&etzpc 19>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@4 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <4>;
+					status = "disabled";
+				};
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+			};
+
+			timers6: timer@40004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x40004000 0x400>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM6_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 69 0x400 0x1>;
+				dma-names = "up";
+				access-controllers = <&etzpc 20>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
+				timer@5 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <5>;
+					status = "disabled";
+				};
+			};
+
+			timers7: timer@40005000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x40005000 0x400>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM7_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 70 0x400 0x1>;
+				dma-names = "up";
+				access-controllers = <&etzpc 21>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
+				timer@6 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <6>;
+					status = "disabled";
+				};
+			};
+
+			timers12: timer@40006000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x40006000 0x400>;
+				interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM12_K>;
+				clock-names = "int";
+				access-controllers = <&etzpc 22>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@11 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <11>;
+					status = "disabled";
+				};
+			};
+
+			timers13: timer@40007000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x40007000 0x400>;
+				interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM13_K>;
+				clock-names = "int";
+				access-controllers = <&etzpc 23>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@12 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <12>;
+					status = "disabled";
+				};
+			};
+
+			timers14: timer@40008000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x40008000 0x400>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM14_K>;
+				clock-names = "int";
+				access-controllers = <&etzpc 24>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@13 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <13>;
+					status = "disabled";
+				};
+			};
+
+			lptimer1: timer@40009000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-lptimer";
+				reg = <0x40009000 0x400>;
+				interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc LPTIM1_K>;
+				clock-names = "mux";
+				wakeup-source;
+				access-controllers = <&etzpc 25>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				trigger@0 {
+					compatible = "st,stm32-lptimer-trigger";
+					reg = <0>;
+					status = "disabled";
+				};
+
+				counter {
+					compatible = "st,stm32-lptimer-counter";
+					status = "disabled";
+				};
+			};
+
+			i2s2: audio-controller@4000b000 {
+				compatible = "st,stm32h7-i2s";
+				#sound-dai-cells = <0>;
+				reg = <0x4000b000 0x400>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 39 0x400 0x01>,
+				       <&dmamux1 40 0x400 0x01>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 27>;
+				status = "disabled";
+			};
+
+			spi2: spi@4000b000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32h7-spi";
+				reg = <0x4000b000 0x400>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SPI2_K>;
+				resets = <&rcc SPI2_R>;
+				dmas = <&dmamux1 39 0x400 0x05>,
+				       <&dmamux1 40 0x400 0x05>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 27>;
+				status = "disabled";
+			};
+
+			i2s3: audio-controller@4000c000 {
+				compatible = "st,stm32h7-i2s";
+				#sound-dai-cells = <0>;
+				reg = <0x4000c000 0x400>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 61 0x400 0x01>,
+				       <&dmamux1 62 0x400 0x01>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 28>;
+				status = "disabled";
+			};
+
+			spi3: spi@4000c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32h7-spi";
+				reg = <0x4000c000 0x400>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SPI3_K>;
+				resets = <&rcc SPI3_R>;
+				dmas = <&dmamux1 61 0x400 0x05>,
+				       <&dmamux1 62 0x400 0x05>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 28>;
+				status = "disabled";
+			};
+
+			spdifrx: audio-controller@4000d000 {
+				compatible = "st,stm32h7-spdifrx";
+				#sound-dai-cells = <0>;
+				reg = <0x4000d000 0x400>;
+				clocks = <&rcc SPDIF_K>;
+				clock-names = "kclk";
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 93 0x400 0x01>,
+				       <&dmamux1 94 0x400 0x01>;
+				dma-names = "rx", "rx-ctrl";
+				access-controllers = <&etzpc 29>;
+				status = "disabled";
+			};
+
+			usart2: serial@4000e000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x4000e000 0x400>;
+				interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc USART2_K>;
+				wakeup-source;
+				dmas = <&dmamux1 43 0x400 0x15>,
+				       <&dmamux1 44 0x400 0x11>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 30>;
+				status = "disabled";
+			};
+
+			usart3: serial@4000f000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x4000f000 0x400>;
+				interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc USART3_K>;
+				wakeup-source;
+				dmas = <&dmamux1 45 0x400 0x15>,
+				       <&dmamux1 46 0x400 0x11>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 31>;
+				status = "disabled";
+			};
+
+			uart4: serial@40010000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40010000 0x400>;
+				interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc UART4_K>;
+				wakeup-source;
+				dmas = <&dmamux1 63 0x400 0x15>,
+				       <&dmamux1 64 0x400 0x11>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 32>;
+				status = "disabled";
+			};
+
+			uart5: serial@40011000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40011000 0x400>;
+				interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc UART5_K>;
+				wakeup-source;
+				dmas = <&dmamux1 65 0x400 0x15>,
+				       <&dmamux1 66 0x400 0x11>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 33>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@40012000 {
+				compatible = "st,stm32mp15-i2c";
+				reg = <0x40012000 0x400>;
+				interrupt-names = "event", "error";
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc I2C1_K>;
+				resets = <&rcc I2C1_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				st,syscfg-fmp = <&syscfg 0x4 0x1>;
+				wakeup-source;
+				i2c-analog-filter;
+				access-controllers = <&etzpc 34>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@40013000 {
+				compatible = "st,stm32mp15-i2c";
+				reg = <0x40013000 0x400>;
+				interrupt-names = "event", "error";
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc I2C2_K>;
+				resets = <&rcc I2C2_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				st,syscfg-fmp = <&syscfg 0x4 0x2>;
+				wakeup-source;
+				i2c-analog-filter;
+				access-controllers = <&etzpc 35>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@40014000 {
+				compatible = "st,stm32mp15-i2c";
+				reg = <0x40014000 0x400>;
+				interrupt-names = "event", "error";
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc I2C3_K>;
+				resets = <&rcc I2C3_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				st,syscfg-fmp = <&syscfg 0x4 0x4>;
+				wakeup-source;
+				i2c-analog-filter;
+				access-controllers = <&etzpc 36>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@40015000 {
+				compatible = "st,stm32mp15-i2c";
+				reg = <0x40015000 0x400>;
+				interrupt-names = "event", "error";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc I2C5_K>;
+				resets = <&rcc I2C5_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				st,syscfg-fmp = <&syscfg 0x4 0x10>;
+				wakeup-source;
+				i2c-analog-filter;
+				access-controllers = <&etzpc 37>;
+				status = "disabled";
+			};
+
+			cec: cec@40016000 {
+				compatible = "st,stm32-cec";
+				reg = <0x40016000 0x400>;
+				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CEC_K>, <&rcc CEC>;
+				clock-names = "cec", "hdmi-cec";
+				access-controllers = <&etzpc 38>;
+				status = "disabled";
+			};
+
+			dac: dac@40017000 {
+				compatible = "st,stm32h7-dac-core";
+				reg = <0x40017000 0x400>;
+				clocks = <&rcc DAC12>;
+				clock-names = "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&etzpc 39>;
+				status = "disabled";
+
+				dac1: dac@1 {
+					compatible = "st,stm32-dac";
+					#io-channel-cells = <1>;
+					reg = <1>;
+					status = "disabled";
+				};
+
+				dac2: dac@2 {
+					compatible = "st,stm32-dac";
+					#io-channel-cells = <1>;
+					reg = <2>;
+					status = "disabled";
+				};
+			};
+
+			uart7: serial@40018000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40018000 0x400>;
+				interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc UART7_K>;
+				wakeup-source;
+				dmas = <&dmamux1 79 0x400 0x15>,
+				       <&dmamux1 80 0x400 0x11>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 40>;
+				status = "disabled";
+			};
+
+			uart8: serial@40019000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40019000 0x400>;
+				interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc UART8_K>;
+				wakeup-source;
+				dmas = <&dmamux1 81 0x400 0x15>,
+				       <&dmamux1 82 0x400 0x11>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 41>;
+				status = "disabled";
+			};
+
+			timers1: timer@44000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x44000000 0x400>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "brk", "up", "trg-com", "cc";
+				clocks = <&rcc TIM1_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 11 0x400 0x1>,
+				       <&dmamux1 12 0x400 0x1>,
+				       <&dmamux1 13 0x400 0x1>,
+				       <&dmamux1 14 0x400 0x1>,
+				       <&dmamux1 15 0x400 0x1>,
+				       <&dmamux1 16 0x400 0x1>,
+				       <&dmamux1 17 0x400 0x1>;
+				dma-names = "ch1", "ch2", "ch3", "ch4",
+					    "up", "trig", "com";
+				access-controllers = <&etzpc 48>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@0 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <0>;
+					status = "disabled";
+				};
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+			};
+
+			timers8: timer@44001000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x44001000 0x400>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "brk", "up", "trg-com", "cc";
+				clocks = <&rcc TIM8_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 47 0x400 0x1>,
+				       <&dmamux1 48 0x400 0x1>,
+				       <&dmamux1 49 0x400 0x1>,
+				       <&dmamux1 50 0x400 0x1>,
+				       <&dmamux1 51 0x400 0x1>,
+				       <&dmamux1 52 0x400 0x1>,
+				       <&dmamux1 53 0x400 0x1>;
+				dma-names = "ch1", "ch2", "ch3", "ch4",
+					    "up", "trig", "com";
+				access-controllers = <&etzpc 49>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@7 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <7>;
+					status = "disabled";
+				};
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+			};
+
+			usart6: serial@44003000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x44003000 0x400>;
+				interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc USART6_K>;
+				wakeup-source;
+				dmas = <&dmamux1 71 0x400 0x15>,
+				<&dmamux1 72 0x400 0x11>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 51>;
+				status = "disabled";
+			};
+
+			i2s1: audio-controller@44004000 {
+				compatible = "st,stm32h7-i2s";
+				#sound-dai-cells = <0>;
+				reg = <0x44004000 0x400>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 37 0x400 0x01>,
+				<&dmamux1 38 0x400 0x01>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 52>;
+				status = "disabled";
+			};
+
+			spi1: spi@44004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32h7-spi";
+				reg = <0x44004000 0x400>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SPI1_K>;
+				resets = <&rcc SPI1_R>;
+				dmas = <&dmamux1 37 0x400 0x05>,
+				<&dmamux1 38 0x400 0x05>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 52>;
+				status = "disabled";
+			};
+
+			spi4: spi@44005000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32h7-spi";
+				reg = <0x44005000 0x400>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SPI4_K>;
+				resets = <&rcc SPI4_R>;
+				dmas = <&dmamux1 83 0x400 0x05>,
+				<&dmamux1 84 0x400 0x05>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 53>;
+				status = "disabled";
+			};
+
+			timers15: timer@44006000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x44006000 0x400>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM15_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 105 0x400 0x1>,
+				       <&dmamux1 106 0x400 0x1>,
+				       <&dmamux1 107 0x400 0x1>,
+				       <&dmamux1 108 0x400 0x1>;
+				dma-names = "ch1", "up", "trig", "com";
+				access-controllers = <&etzpc 54>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@14 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <14>;
+					status = "disabled";
+				};
+			};
+
+			timers16: timer@44007000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x44007000 0x400>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM16_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 109 0x400 0x1>,
+				<&dmamux1 110 0x400 0x1>;
+				dma-names = "ch1", "up";
+				access-controllers = <&etzpc 55>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@15 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <15>;
+					status = "disabled";
+				};
+			};
+
+			timers17: timer@44008000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-timers";
+				reg = <0x44008000 0x400>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc TIM17_K>;
+				clock-names = "int";
+				dmas = <&dmamux1 111 0x400 0x1>,
+				<&dmamux1 112 0x400 0x1>;
+				dma-names = "ch1", "up";
+				access-controllers = <&etzpc 56>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@16 {
+					compatible = "st,stm32h7-timer-trigger";
+					reg = <16>;
+					status = "disabled";
+				};
+			};
+
+			spi5: spi@44009000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32h7-spi";
+				reg = <0x44009000 0x400>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SPI5_K>;
+				resets = <&rcc SPI5_R>;
+				dmas = <&dmamux1 85 0x400 0x05>,
+				<&dmamux1 86 0x400 0x05>;
+				dma-names = "rx", "tx";
+				access-controllers = <&etzpc 57>;
+				status = "disabled";
+			};
+
+			sai1: sai@4400a000 {
+				compatible = "st,stm32h7-sai";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x4400a000 0x400>;
+				reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc SAI1_R>;
+				access-controllers = <&etzpc 58>;
+				status = "disabled";
+
+				sai1a: audio-controller@4400a004 {
+					#sound-dai-cells = <0>;
+
+					compatible = "st,stm32-sai-sub-a";
+					reg = <0x4 0x20>;
+					clocks = <&rcc SAI1_K>;
+					clock-names = "sai_ck";
+					dmas = <&dmamux1 87 0x400 0x01>;
+					status = "disabled";
+				};
+
+				sai1b: audio-controller@4400a024 {
+					#sound-dai-cells = <0>;
+					compatible = "st,stm32-sai-sub-b";
+					reg = <0x24 0x20>;
+					clocks = <&rcc SAI1_K>;
+					clock-names = "sai_ck";
+					dmas = <&dmamux1 88 0x400 0x01>;
+					status = "disabled";
+				};
+			};
+
+			sai2: sai@4400b000 {
+				compatible = "st,stm32h7-sai";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x4400b000 0x400>;
+				reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc SAI2_R>;
+				access-controllers = <&etzpc 59>;
+				status = "disabled";
+
+				sai2a: audio-controller@4400b004 {
+					#sound-dai-cells = <0>;
+					compatible = "st,stm32-sai-sub-a";
+					reg = <0x4 0x20>;
+					clocks = <&rcc SAI2_K>;
+					clock-names = "sai_ck";
+					dmas = <&dmamux1 89 0x400 0x01>;
+					status = "disabled";
+				};
+
+				sai2b: audio-controller@4400b024 {
+					#sound-dai-cells = <0>;
+					compatible = "st,stm32-sai-sub-b";
+					reg = <0x24 0x20>;
+					clocks = <&rcc SAI2_K>;
+					clock-names = "sai_ck";
+					dmas = <&dmamux1 90 0x400 0x01>;
+					status = "disabled";
+				};
+			};
+
+			sai3: sai@4400c000 {
+				compatible = "st,stm32h7-sai";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x4400c000 0x400>;
+				reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc SAI3_R>;
+				access-controllers = <&etzpc 60>;
+				status = "disabled";
+
+				sai3a: audio-controller@4400c004 {
+					#sound-dai-cells = <0>;
+					compatible = "st,stm32-sai-sub-a";
+					reg = <0x04 0x20>;
+					clocks = <&rcc SAI3_K>;
+					clock-names = "sai_ck";
+					dmas = <&dmamux1 113 0x400 0x01>;
+					status = "disabled";
+				};
+
+				sai3b: audio-controller@4400c024 {
+					#sound-dai-cells = <0>;
+					compatible = "st,stm32-sai-sub-b";
+					reg = <0x24 0x20>;
+					clocks = <&rcc SAI3_K>;
+					clock-names = "sai_ck";
+					dmas = <&dmamux1 114 0x400 0x01>;
+					status = "disabled";
+				};
+			};
+
+			dfsdm: dfsdm@4400d000 {
+				compatible = "st,stm32mp1-dfsdm";
+				reg = <0x4400d000 0x800>;
+				clocks = <&rcc DFSDM_K>;
+				clock-names = "dfsdm";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&etzpc 61>;
+				status = "disabled";
+
+				dfsdm0: filter@0 {
+					compatible = "st,stm32-dfsdm-adc";
+					#io-channel-cells = <1>;
+					reg = <0>;
+					interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&dmamux1 101 0x400 0x01>;
+					dma-names = "rx";
+					status = "disabled";
+				};
+
+				dfsdm1: filter@1 {
+					compatible = "st,stm32-dfsdm-adc";
+					#io-channel-cells = <1>;
+					reg = <1>;
+					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&dmamux1 102 0x400 0x01>;
+					dma-names = "rx";
+					status = "disabled";
+				};
+
+				dfsdm2: filter@2 {
+					compatible = "st,stm32-dfsdm-adc";
+					#io-channel-cells = <1>;
+					reg = <2>;
+					interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&dmamux1 103 0x400 0x01>;
+					dma-names = "rx";
+					status = "disabled";
+				};
+
+				dfsdm3: filter@3 {
+					compatible = "st,stm32-dfsdm-adc";
+					#io-channel-cells = <1>;
+					reg = <3>;
+					interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&dmamux1 104 0x400 0x01>;
+					dma-names = "rx";
+					status = "disabled";
+				};
+
+				dfsdm4: filter@4 {
+					compatible = "st,stm32-dfsdm-adc";
+					#io-channel-cells = <1>;
+					reg = <4>;
+					interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&dmamux1 91 0x400 0x01>;
+					dma-names = "rx";
+					status = "disabled";
+				};
+
+				dfsdm5: filter@5 {
+					compatible = "st,stm32-dfsdm-adc";
+					#io-channel-cells = <1>;
+					reg = <5>;
+					interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&dmamux1 92 0x400 0x01>;
+					dma-names = "rx";
+					status = "disabled";
+				};
+			};
+
+			dma1: dma-controller@48000000 {
+				compatible = "st,stm32-dma";
+				reg = <0x48000000 0x400>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc DMA1>;
+				resets = <&rcc DMA1_R>;
+				#dma-cells = <4>;
+				st,mem2mem;
+				dma-requests = <8>;
+				access-controllers = <&etzpc 88>;
+			};
+
+			dma2: dma-controller@48001000 {
+				compatible = "st,stm32-dma";
+				reg = <0x48001000 0x400>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc DMA2>;
+				resets = <&rcc DMA2_R>;
+				#dma-cells = <4>;
+				st,mem2mem;
+				dma-requests = <8>;
+				access-controllers = <&etzpc 89>;
+			};
+
+			dmamux1: dma-router@48002000 {
+				compatible = "st,stm32h7-dmamux";
+				reg = <0x48002000 0x40>;
+				#dma-cells = <3>;
+				dma-requests = <128>;
+				dma-masters = <&dma1 &dma2>;
+				dma-channels = <16>;
+				clocks = <&rcc DMAMUX>;
+				resets = <&rcc DMAMUX_R>;
+				access-controllers = <&etzpc 90>;
+			};
+
+			adc: adc@48003000 {
+				compatible = "st,stm32mp1-adc-core";
+				reg = <0x48003000 0x400>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc ADC12>, <&rcc ADC12_K>;
+				clock-names = "bus", "adc";
+				interrupt-controller;
+				st,syscfg = <&syscfg>;
+				#interrupt-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&etzpc 72>;
+				status = "disabled";
+
+				adc1: adc@0 {
+					compatible = "st,stm32mp1-adc";
+					#io-channel-cells = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+					interrupt-parent = <&adc>;
+					interrupts = <0>;
+					dmas = <&dmamux1 9 0x400 0x01>;
+					dma-names = "rx";
+					status = "disabled";
+				};
+
+				adc2: adc@100 {
+					compatible = "st,stm32mp1-adc";
+					#io-channel-cells = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x100>;
+					interrupt-parent = <&adc>;
+					interrupts = <1>;
+					dmas = <&dmamux1 10 0x400 0x01>;
+					dma-names = "rx";
+					nvmem-cells = <&vrefint>;
+					nvmem-cell-names = "vrefint";
+					status = "disabled";
+					channel@13 {
+						reg = <13>;
+						label = "vrefint";
+					};
+					channel@14 {
+						reg = <14>;
+						label = "vddcore";
+					};
+				};
+			};
+
+			sdmmc3: mmc@48004000 {
+				compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00253180>;
+				reg = <0x48004000 0x400>;
+				interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SDMMC3_K>;
+				clock-names = "apb_pclk";
+				resets = <&rcc SDMMC3_R>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <120000000>;
+				access-controllers = <&etzpc 86>;
+				status = "disabled";
+			};
+
+			usbotg_hs: usb-otg@49000000 {
+				compatible = "st,stm32mp15-hsotg", "snps,dwc2";
+				reg = <0x49000000 0x10000>;
+				clocks = <&rcc USBO_K>, <&usbphyc>;
+				clock-names = "otg", "utmi";
+				resets = <&rcc USBO_R>;
+				reset-names = "dwc2";
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				g-rx-fifo-size = <512>;
+				g-np-tx-fifo-size = <32>;
+				g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+				dr_mode = "otg";
+				otg-rev = <0x200>;
+				usb33d-supply = <&usb33>;
+				access-controllers = <&etzpc 85>;
+				status = "disabled";
+			};
+
+			dcmi: dcmi@4c006000 {
+				compatible = "st,stm32-dcmi";
+				reg = <0x4c006000 0x400>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc CAMITF_R>;
+				clocks = <&rcc DCMI>;
+				clock-names = "mclk";
+				dmas = <&dmamux1 75 0x400 0x01>;
+				dma-names = "tx";
+				access-controllers = <&etzpc 70>;
+				status = "disabled";
+			};
+
+			lptimer2: timer@50021000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-lptimer";
+				reg = <0x50021000 0x400>;
+				interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc LPTIM2_K>;
+				clock-names = "mux";
+				wakeup-source;
+				access-controllers = <&etzpc 64>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				trigger@1 {
+					compatible = "st,stm32-lptimer-trigger";
+					reg = <1>;
+					status = "disabled";
+				};
+
+				counter {
+					compatible = "st,stm32-lptimer-counter";
+					status = "disabled";
+				};
+			};
+
+			lptimer3: timer@50022000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32-lptimer";
+				reg = <0x50022000 0x400>;
+				interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc LPTIM3_K>;
+				clock-names = "mux";
+				wakeup-source;
+				access-controllers = <&etzpc 65>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				trigger@2 {
+					compatible = "st,stm32-lptimer-trigger";
+					reg = <2>;
+					status = "disabled";
+				};
+			};
+
+			lptimer4: timer@50023000 {
+				compatible = "st,stm32-lptimer";
+				reg = <0x50023000 0x400>;
+				interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc LPTIM4_K>;
+				clock-names = "mux";
+				wakeup-source;
+				access-controllers = <&etzpc 66>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+			};
+
+			lptimer5: timer@50024000 {
+				compatible = "st,stm32-lptimer";
+				reg = <0x50024000 0x400>;
+				interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc LPTIM5_K>;
+				clock-names = "mux";
+				wakeup-source;
+				access-controllers = <&etzpc 67>;
+				status = "disabled";
+
+				pwm {
+					compatible = "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+			};
+
+			vrefbuf: vrefbuf@50025000 {
+				compatible = "st,stm32-vrefbuf";
+				reg = <0x50025000 0x8>;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2500000>;
+				clocks = <&rcc VREF>;
+				access-controllers = <&etzpc 69>;
+				status = "disabled";
+			};
+
+			sai4: sai@50027000 {
+				compatible = "st,stm32h7-sai";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x50027000 0x400>;
+				reg = <0x50027000 0x4>, <0x500273f0 0x10>;
+				interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc SAI4_R>;
+				access-controllers = <&etzpc 68>;
+				status = "disabled";
+
+				sai4a: audio-controller@50027004 {
+					#sound-dai-cells = <0>;
+					compatible = "st,stm32-sai-sub-a";
+					reg = <0x04 0x20>;
+					clocks = <&rcc SAI4_K>;
+					clock-names = "sai_ck";
+					dmas = <&dmamux1 99 0x400 0x01>;
+					status = "disabled";
+				};
+
+				sai4b: audio-controller@50027024 {
+					#sound-dai-cells = <0>;
+					compatible = "st,stm32-sai-sub-b";
+					reg = <0x24 0x20>;
+					clocks = <&rcc SAI4_K>;
+					clock-names = "sai_ck";
+					dmas = <&dmamux1 100 0x400 0x01>;
+					status = "disabled";
+				};
+			};
+
+			hash1: hash@54002000 {
+				compatible = "st,stm32f756-hash";
+				reg = <0x54002000 0x400>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc HASH1>;
+				resets = <&rcc HASH1_R>;
+				dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>;
+				dma-names = "in";
+				dma-maxburst = <2>;
+				access-controllers = <&etzpc 8>;
+				status = "disabled";
+			};
+
+			rng1: rng@54003000 {
+				compatible = "st,stm32-rng";
+				reg = <0x54003000 0x400>;
+				clocks = <&rcc RNG1_K>;
+				resets = <&rcc RNG1_R>;
+				access-controllers = <&etzpc 7>;
+				status = "disabled";
+			};
+
+			fmc: memory-controller@58002000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "st,stm32mp1-fmc2-ebi";
+				reg = <0x58002000 0x1000>;
+				clocks = <&rcc FMC_K>;
+				resets = <&rcc FMC_R>;
+				access-controllers = <&etzpc 91>;
+				status = "disabled";
+
+				ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+					 <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+					 <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+					 <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+					 <4 0 0x80000000 0x10000000>; /* NAND */
+
+				nand-controller@4,0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "st,stm32mp1-fmc2-nfc";
+					reg = <4 0x00000000 0x1000>,
+					      <4 0x08010000 0x1000>,
+					      <4 0x08020000 0x1000>,
+					      <4 0x01000000 0x1000>,
+					      <4 0x09010000 0x1000>,
+					      <4 0x09020000 0x1000>;
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
+					       <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
+					       <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
+					dma-names = "tx", "rx", "ecc";
+					status = "disabled";
+				};
+			};
+
+			qspi: spi@58003000 {
+				compatible = "st,stm32f469-qspi";
+				reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+				reg-names = "qspi", "qspi_mm";
+				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>,
+				       <&mdma1 22 0x2 0x10100008 0x0 0x0>;
+				dma-names = "tx", "rx";
+				clocks = <&rcc QSPI_K>;
+				resets = <&rcc QSPI_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&etzpc 92>;
+				status = "disabled";
+			};
+
+			ethernet0: ethernet@5800a000 {
+				compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
+				reg = <0x5800a000 0x2000>;
+				reg-names = "stmmaceth";
+				interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq";
+				clock-names = "stmmaceth",
+					      "mac-clk-tx",
+					      "mac-clk-rx",
+					      "eth-ck",
+					      "ptp_ref",
+					      "ethstp";
+				clocks = <&rcc ETHMAC>,
+					 <&rcc ETHTX>,
+					 <&rcc ETHRX>,
+					 <&rcc ETHCK_K>,
+					 <&rcc ETHPTP_K>,
+					 <&rcc ETHSTP>;
+				st,syscon = <&syscfg 0x4>;
+				snps,mixed-burst;
+				snps,pbl = <2>;
+				snps,axi-config = <&stmmac_axi_config_0>;
+				snps,tso;
+				access-controllers = <&etzpc 94>;
+				status = "disabled";
+
+				stmmac_axi_config_0: stmmac-axi-config {
+					snps,wr_osr_lmt = <0x7>;
+					snps,rd_osr_lmt = <0x7>;
+					snps,blen = <0 0 0 0 16 8 4>;
+				};
+			};
+
+			usart1: serial@5c000000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x5c000000 0x400>;
+				interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc USART1_K>;
+				wakeup-source;
+				access-controllers = <&etzpc 3>;
+				status = "disabled";
+			};
+
+			spi6: spi@5c001000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32h7-spi";
+				reg = <0x5c001000 0x400>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc SPI6_K>;
+				resets = <&rcc SPI6_R>;
+				dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
+				       <&mdma1 35 0x0 0x40002 0x0 0x0>;
+				access-controllers = <&etzpc 4>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			i2c4: i2c@5c002000 {
+				compatible = "st,stm32mp15-i2c";
+				reg = <0x5c002000 0x400>;
+				interrupt-names = "event", "error";
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc I2C4_K>;
+				resets = <&rcc I2C4_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				st,syscfg-fmp = <&syscfg 0x4 0x8>;
+				wakeup-source;
+				i2c-analog-filter;
+				access-controllers = <&etzpc 5>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@5c009000 {
+				compatible = "st,stm32mp15-i2c";
+				reg = <0x5c009000 0x400>;
+				interrupt-names = "event", "error";
+				interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc I2C6_K>;
+				resets = <&rcc I2C6_R>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				st,syscfg-fmp = <&syscfg 0x4 0x20>;
+				wakeup-source;
+				i2c-analog-filter;
+				access-controllers = <&etzpc 12>;
+				status = "disabled";
+			};
+		};
+
+		tamp: tamp@5c00a000 {
+			compatible = "st,stm32-tamp", "syscon", "simple-mfd";
+			reg = <0x5c00a000 0x400>;
+		};
+
+		/*
+		 * Break node order to solve dependency probe issue between
+		 * pinctrl and exti.
+		 */
+		pinctrl: pinctrl@50002000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp157-pinctrl";
+			ranges = <0 0x50002000 0xa400>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
+
+			gpioa: gpio@50002000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc GPIOA>;
+				st,bank-name = "GPIOA";
+				status = "disabled";
+			};
+
+			gpiob: gpio@50003000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc GPIOB>;
+				st,bank-name = "GPIOB";
+				status = "disabled";
+			};
+
+			gpioc: gpio@50004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc GPIOC>;
+				st,bank-name = "GPIOC";
+				status = "disabled";
+			};
+
+			gpiod: gpio@50005000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x400>;
+				clocks = <&rcc GPIOD>;
+				st,bank-name = "GPIOD";
+				status = "disabled";
+			};
+
+			gpioe: gpio@50006000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x400>;
+				clocks = <&rcc GPIOE>;
+				st,bank-name = "GPIOE";
+				status = "disabled";
+			};
+
+			gpiof: gpio@50007000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x400>;
+				clocks = <&rcc GPIOF>;
+				st,bank-name = "GPIOF";
+				status = "disabled";
+			};
+
+			gpiog: gpio@50008000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x400>;
+				clocks = <&rcc GPIOG>;
+				st,bank-name = "GPIOG";
+				status = "disabled";
+			};
+
+			gpioh: gpio@50009000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x400>;
+				clocks = <&rcc GPIOH>;
+				st,bank-name = "GPIOH";
+				status = "disabled";
+			};
+
+			gpioi: gpio@5000a000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x400>;
+				clocks = <&rcc GPIOI>;
+				st,bank-name = "GPIOI";
+				status = "disabled";
+			};
+
+			gpioj: gpio@5000b000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x9000 0x400>;
+				clocks = <&rcc GPIOJ>;
+				st,bank-name = "GPIOJ";
+				status = "disabled";
+			};
+
+			gpiok: gpio@5000c000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xa000 0x400>;
+				clocks = <&rcc GPIOK>;
+				st,bank-name = "GPIOK";
+				status = "disabled";
+			};
+		};
+
+		pinctrl_z: pinctrl@54004000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp157-z-pinctrl";
+			ranges = <0 0x54004000 0x400>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
+
+			gpioz: gpio@54004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x400>;
+				clocks = <&rcc GPIOZ>;
+				st,bank-name = "GPIOZ";
+				st,bank-ioport = <11>;
+				status = "disabled";
+			};
+		};
+	};
+
+	mlahb: ahb {
+		compatible = "st,mlahb", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		dma-ranges = <0x00000000 0x38000000 0x10000>,
+			     <0x10000000 0x10000000 0x60000>,
+			     <0x30000000 0x30000000 0x60000>;
+
+		m4_rproc: m4@10000000 {
+			compatible = "st,stm32mp1-m4";
+			reg = <0x10000000 0x40000>,
+			      <0x30000000 0x40000>,
+			      <0x38000000 0x10000>;
+			resets = <&rcc MCU_R>;
+			reset-names = "mcu_rst";
+			st,syscfg-holdboot = <&rcc 0x10C 0x1>;
+			st,syscfg-pdds = <&pwr_mcu 0x0 0x1>;
+			st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
+			st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp151a-dhcor-testbench.dts b/arch/arm/boot/dts/st/stm32mp151a-dhcor-testbench.dts
new file mode 100644
index 000000000000..e0f828ecc2fa
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp151a-dhcor-testbench.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include "stm32mp151.dtsi"
+#include "stm32mp15xx-dhcor-som.dtsi"
+#include "stm32mp15xx-dhcor-testbench.dtsi"
+
+/ {
+	model = "DH electronics STM32MP151A DHCOR Testbench";
+	compatible = "dh,stm32mp151a-dhcor-testbench",
+		     "dh,stm32mp151a-dhcor-som",
+		     "st,stm32mp151";
+};
diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1a.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts
index 75874eafde11..8e1dd84e0c0a 100644
--- a/arch/arm/boot/dts/stm32mp151a-prtt1a.dts
+++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts
@@ -28,16 +28,12 @@
 	};
 };
 
-&pwm5_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
-	};
+&{pwm5_pins_a/pins} {
+	pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
 };
 
-&pwm5_sleep_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */
-	};
+&{pwm5_sleep_pins_a/pins} {
+	pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */
 };
 
 &timers5 {
diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts
new file mode 100644
index 000000000000..3b33b7093b68
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151a-prtt1l.dtsi"
+
+/ {
+	model = "Protonic PRTT1C";
+	compatible = "prt,prtt1c", "st,stm32mp151";
+
+	clock_ksz9031: clock-ksz9031 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	clock_sja1105: clock-sja1105 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	pse_t1l1: ethernet-pse-1 {
+		compatible = "podl-pse-regulator";
+		pse-supply = <&reg_t1l1>;
+		#pse-cells = <0>;
+	};
+
+	pse_t1l2: ethernet-pse-2 {
+		compatible = "podl-pse-regulator";
+		pse-supply = <&reg_t1l2>;
+		#pse-cells = <0>;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&gpioc 1 GPIO_ACTIVE_HIGH
+			 &gpioa 2 GPIO_ACTIVE_HIGH>;
+
+	};
+
+	reg_t1l1: regulator-pse-t1l1 {
+		compatible = "regulator-fixed";
+		regulator-name = "pse-t1l1";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpiog 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_t1l2: regulator-pse-t1l2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pse-t1l2";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpiog 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpiod 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ethernet0 {
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&gpioa {
+	gpio-line-names =
+		"", "", "", "PHY0_nRESET", "PHY0_nINT", "", "", "",
+		"", "", "", "", "", "", "", "SPI1_nSS";
+};
+
+&gpiod {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"WFM_RESET", "", "", "", "", "", "", "";
+};
+
+&gpioe {
+	gpio-line-names =
+		"SDMMC2_nRESET", "", "", "", "", "", "SPI1_nRESET", "",
+		"", "", "", "", "WFM_nIRQ", "", "", "";
+};
+
+&gpiog {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "PHY3_nINT",
+		"PHY1_nINT", "PHY3_nRESET", "PHY2_nINT", "PHY2_nRESET",
+		"PHY1_nRESET", "SPE1_PWR", "SPE0_PWR", "";
+};
+
+&mdio0 {
+	/* All this DP83TD510E PHYs can't be probed before switch@0 is
+	 * probed so we need to use compatible with PHYid
+	 */
+	/* TI DP83TD510E */
+	t1l0_phy: ethernet-phy@6 {
+		compatible = "ethernet-phy-id2000.0181";
+		reg = <6>;
+		interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+	};
+
+	/* TI DP83TD510E */
+	t1l1_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-id2000.0181";
+		reg = <7>;
+		interrupts-extended = <&gpiog 8 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpiog 12 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+		pses = <&pse_t1l1>;
+	};
+
+	/* TI DP83TD510E */
+	t1l2_phy: ethernet-phy@10 {
+		compatible = "ethernet-phy-id2000.0181";
+		reg = <10>;
+		interrupts-extended = <&gpiog 10 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpiog 11 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+		pses = <&pse_t1l2>;
+	};
+
+	/* Micrel KSZ9031 */
+	rj45_phy: ethernet-phy@2 {
+		reg = <2>;
+		interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <1000>;
+
+		clocks = <&clock_ksz9031>;
+	};
+};
+
+&qspi {
+	status = "disabled";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	no-1-8-v;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&{sdmmc2_b4_od_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+		 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+		 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+		 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+};
+
+&{sdmmc2_b4_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+		 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+		 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+		 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+		 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+};
+
+&{sdmmc2_b4_sleep_pins_a/pins} {
+	pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+		 <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */
+		 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+		 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+		 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+		 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+};
+
+&{sdmmc2_d47_pins_a/pins} {
+	pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+		 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+		 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+		 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+};
+
+&{sdmmc2_d47_sleep_pins_a/pins} {
+	pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+		 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+		 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+		 <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+};
+
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_b>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_b>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>;
+	non-removable;
+	no-1-8-v;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	mmc@1 {
+		compatible = "prt,prtt1c-wfm200", "silabs,wf200";
+		reg = <1>;
+	};
+};
+
+&{sdmmc3_b4_od_pins_b/pins1} {
+	pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+		 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+		 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+		 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
+};
+
+&{sdmmc3_b4_pins_b/pins1} {
+	pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+		 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+		 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+		 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+		 <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
+};
+
+&{sdmmc3_b4_sleep_pins_b/pins} {
+	pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */
+		 <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */
+		 <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
+		 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+		 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+		 <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pins_b>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	switch@0 {
+		compatible = "nxp,sja1105q";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+		spi-rx-delay-us = <1>;
+		spi-tx-delay-us = <1>;
+		spi-cpha;
+
+		reset-gpios = <&gpioe 6 GPIO_ACTIVE_LOW>;
+
+		clocks = <&clock_sja1105>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "t1l0";
+				phy-mode = "rmii";
+				phy-handle = <&t1l0_phy>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "t1l1";
+				phy-mode = "rmii";
+				phy-handle = <&t1l1_phy>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "t1l2";
+				phy-mode = "rmii";
+				phy-handle = <&t1l2_phy>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "rj45";
+				phy-handle = <&rj45_phy>;
+				phy-mode = "rgmii-id";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "cpu";
+				ethernet = <&ethernet0>;
+				phy-mode = "rmii";
+
+				fixed-link {
+					speed = <100>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
new file mode 100644
index 000000000000..98a31c2b5d45
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxad-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		mdio-gpio0 = &mdio0;
+		serial0 = &uart4;
+	};
+
+	led-controller-0 {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+
+	/* DP83TD510E PHYs have max MDC rate of 1.75MHz. Since we can't reduce
+	 * stmmac MDC clock without reducing system bus rate, we need to use
+	 * gpio based MDIO bus.
+	 */
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&gpioc 1 GPIO_ACTIVE_HIGH
+			 &gpioa 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&ethernet0 {
+	pinctrl-0 = <&ethernet0_rmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&{ethernet0_rmii_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
+		 <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
+		 <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */
+};
+
+&{ethernet0_rmii_pins_a/pins2} {
+	pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
+		 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
+		 <STM32_PINMUX('A', 1, AF11)>,  /* ETH1_RMII_REF_CLK input */
+		 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
+};
+
+&{ethernet0_rmii_sleep_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
+		 <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
+		 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+		 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
+		 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
+		 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
+		 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
+};
+
+&iwdg2 {
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <104000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&{qspi_bk1_pins_a/pins} {
+	/delete-property/ bias-disable;
+	bias-pull-up;
+	drive-push-pull;
+	slew-rate = <1>;
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&{sdmmc1_b4_od_pins_a/pins1} {
+	/delete-property/ bias-disable;
+	bias-pull-up;
+};
+
+&{sdmmc1_b4_od_pins_a/pins2} {
+	/delete-property/ bias-disable;
+	bias-pull-up;
+};
+
+&{sdmmc1_b4_pins_a/pins1} {
+	/delete-property/ bias-disable;
+	bias-pull-up;
+};
+
+&{sdmmc1_b4_pins_a/pins2} {
+	/delete-property/ bias-disable;
+	bias-pull-up;
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&{uart4_idle_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */
+};
+
+&{uart4_idle_pins_a/pins2} {
+	pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+	/delete-property/ bias-disable;
+	bias-pull-up;
+};
+
+&{uart4_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
+	slew-rate = <0>;
+};
+
+&{uart4_pins_a/pins2} {
+	pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+	/delete-property/ bias-disable;
+	bias-pull-up;
+};
+
+&{uart4_sleep_pins_a/pins} {
+	pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */
+		<STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+};
+
+&usbh_ehci {
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "host";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&reg_3v3>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&reg_3v3>;
+};
diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1s.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts
index ad25929e64e6..b6be61b159e7 100644
--- a/arch/arm/boot/dts/stm32mp151a-prtt1s.dts
+++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts
@@ -36,18 +36,14 @@
 	};
 };
 
-&i2c1_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
-			 <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */
-	};
+&{i2c1_pins_a/pins} {
+	pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+		 <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */
 };
 
-&i2c1_sleep_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
-			 <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */
-	};
+&{i2c1_sleep_pins_a/pins} {
+	pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+		 <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */
 };
 
 &mdio0 {
diff --git a/arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts b/arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts
new file mode 100644
index 000000000000..a5ea1431c399
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include "stm32mp15x-mecio1-io.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Protonic MECIO1r0";
+	compatible = "prt,mecio1r0", "st,stm32mp151";
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			gpios = <&gpioa 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			gpios = <&gpioa 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&ethernet0 {
+	assigned-clocks = <&rcc ETHCK_K>, <&rcc PLL3_Q>;
+	assigned-clock-parents = <&rcc PLL3_Q>;
+	assigned-clock-rates = <125000000>; /* Clock PLL3 to 625Mhz in tf-a. */
+	st,eth-clk-sel;
+};
diff --git a/arch/arm/boot/dts/st/stm32mp151c-mect1s.dts b/arch/arm/boot/dts/st/stm32mp151c-mect1s.dts
new file mode 100644
index 000000000000..a1b8c3646e98
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp151c-mect1s.dts
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Protonic MECT1S";
+	compatible = "prt,mect1s", "st,stm32mp151";
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	aliases {
+		serial0 = &uart4;
+		ethernet0 = &ethernet0;
+		ethernet1 = &ethernet1;
+		ethernet2 = &ethernet2;
+		ethernet3 = &ethernet3;
+		ethernet4 = &ethernet4;
+	};
+
+	v3v3: regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	v5v: regulator-v5v {
+		compatible = "regulator-fixed";
+		regulator-name = "v5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&clk_hse {
+	clock-frequency = <24000000>;
+};
+
+&clk_lse {
+	status = "disabled";
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rmii";
+	max-speed = <100>;
+	st,eth-clk-sel;
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	mdio0: mdio {
+		 #address-cells = <1>;
+		 #size-cells = <0>;
+		 compatible = "snps,dwmac-mdio";
+	};
+};
+
+&{ethernet0_rmii_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
+		 <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
+		 <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+		 <STM32_PINMUX('A', 2, AF11)>,  /* ETH1_MDIO */
+		 <STM32_PINMUX('C', 1, AF11)>;  /* ETH1_MDC */
+};
+
+&{ethernet0_rmii_pins_a/pins2} {
+	pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
+		 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
+		 <STM32_PINMUX('A', 1, AF11)>,  /* ETH1_RMII_REF_CLK input */
+		 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
+};
+
+&{ethernet0_rmii_sleep_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
+		 <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
+		 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+		 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
+		 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
+		 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
+		 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
+};
+
+&mdio0 {
+	/* All this DP83TG720R PHYs can't be probed before switch@0 is
+	 * probed so we need to use compatible with PHYid
+	 */
+	/* TI DP83TG720R */
+	t1_phy0: ethernet-phy@8 {
+		compatible = "ethernet-phy-id2000.a284";
+		reg = <8>;
+		interrupts-extended = <&gpioi 5 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpioh 13 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+	};
+
+	/* TI DP83TG720R */
+	t1_phy1: ethernet-phy@c {
+		compatible = "ethernet-phy-id2000.a284";
+		reg = <12>;
+		interrupts-extended = <&gpioj 0 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpioh 14 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+	};
+
+	/* TI DP83TG720R */
+	t1_phy2: ethernet-phy@4 {
+		compatible = "ethernet-phy-id2000.a284";
+		reg = <4>;
+		interrupts-extended = <&gpioi 7 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+	};
+
+	/* TI DP83TG720R */
+	t1_phy3: ethernet-phy@d {
+		compatible = "ethernet-phy-id2000.a284";
+		reg = <13>;
+		interrupts-extended = <&gpioi 15 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpioi 13 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <1000>;
+	};
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&{qspi_bk1_pins_a/pins} {
+	/delete-property/ bias-disable;
+	bias-pull-up;
+	drive-push-pull;
+	slew-rate = <1>;
+};
+
+&spi2 {
+	pinctrl-0 = <&spi2_pins_b>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpioj 3 GPIO_ACTIVE_LOW>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	switch@0 {
+		compatible = "nxp,sja1105q";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-rx-delay-us = <1>;
+		spi-tx-delay-us = <1>;
+		spi-cpha;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet1: port@0 {
+				reg = <0>;
+				label = "t10";
+				phy-mode = "rgmii-id";
+				phy-handle = <&t1_phy0>;
+			};
+
+			ethernet2: port@1 {
+				reg = <1>;
+				label = "t11";
+				phy-mode = "rgmii-id";
+				phy-handle = <&t1_phy1>;
+			};
+
+			ethernet3: port@2 {
+				reg = <2>;
+				label = "t12";
+				phy-mode = "rgmii-id";
+				phy-handle = <&t1_phy2>;
+			};
+
+			ethernet4: port@3 {
+				reg = <3>;
+				label = "t13";
+				phy-mode = "rgmii-id";
+				phy-handle = <&t1_phy3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "cpu";
+				ethernet = <&ethernet0>;
+				phy-mode = "rmii";
+
+				/* RGMII mode is not working properly, using RMII instead. */
+				fixed-link {
+					speed = <100>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&usbh_ehci {
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "host";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	vbus-supply = <&v5v>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&v3v3>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&v3v3>;
+};
diff --git a/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts b/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts
new file mode 100644
index 000000000000..5d219a448763
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/dts-v1/;
+
+#include <arm/st/stm32mp151.dtsi>
+#include <arm/st/stm32mp15xc.dtsi>
+#include <arm/st/stm32mp15-pinctrl.dtsi>
+#include <arm/st/stm32mp15xxad-pinctrl.dtsi>
+#include <arm/st/stm32mp15-scmi.dtsi>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Plymovent AQM board";
+	compatible = "ply,plyaqm", "st,stm32mp151";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+		serial1 = &uart7;
+	};
+
+	codec {
+		compatible = "invensense,ics43432";
+
+		port {
+			codec_endpoint: endpoint {
+				remote-endpoint = <&i2s1_endpoint>;
+				dai-format = "i2s";
+			};
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>; /* WHITE_EN */
+			color = <LED_COLOR_ID_WHITE>;
+			default-state = "on";
+		};
+	};
+
+	v3v3: fixed-regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	v5v_sw: fixed-regulator-v5sw {
+		compatible = "regulator-fixed";
+		regulator-name = "5v-switched";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpioe 10 GPIO_ACTIVE_HIGH>; /* 5V_SWITCHED_EN */
+		startup-delay-us = <100000>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		optee@cfd00000 {
+			reg = <0xcfd00000 0x300000>;
+			no-map;
+		};
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "STM32MP15";
+		dais = <&i2s1_port>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpioe 12 GPIO_ACTIVE_LOW>; /* WLAN_REG_ON */
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc1_in10_pins_a>;
+	vdda-supply = <&v3v3>;
+	vref-supply = <&v3v3>;
+	status = "okay";
+
+	adc@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		channel@10 { /* NTC */
+			reg = <10>;
+			st,min-sample-time-ns = <10000>;  /* 10µs sampling time */
+		};
+	};
+};
+
+&cpu0 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cryp1 {
+	clocks = <&scmi_clk CK_SCMI_CRYP1>;
+	resets = <&scmi_reset RST_SCMI_CRYP1>;
+	status = "okay";
+};
+
+&ethernet0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ethernet0_rmii_pins_d>;
+	pinctrl-1 = <&ethernet0_rmii_sleep_pins_d>;
+	phy-mode = "rmii";
+	max-speed = <100>;
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		/* KSZ8081RNA PHY */
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpiob 0 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpiob 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&gpioa {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "HWID_PL_N", "HWID_CP", "";
+};
+
+&gpiob {
+	gpio-line-names =
+		"", "", "", "", "", "", "LED_LATCH", "",
+		"", "RELAY1_EN", "", "", "", "", "", "";
+};
+
+&gpioc {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "HWID_Q7", "", "";
+};
+
+&gpioe {
+	gpio-line-names =
+		"", "", "", "", "RELAY2_EN", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpiog {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "SW1",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpioz {
+	clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+	clocks = <&scmi_clk CK_SCMI_HASH1>;
+	resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_c>;
+	pinctrl-1 = <&i2c1_sleep_pins_c>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c4 {
+	clocks = <&scmi_clk CK_SCMI_I2C4>;
+	resets = <&scmi_reset RST_SCMI_I2C4>;
+};
+
+&i2c6 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c6_pins_b>;
+	pinctrl-1 = <&i2c6_sleep_pins_b>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	clocks = <&scmi_clk CK_SCMI_I2C6>;
+	resets = <&scmi_reset RST_SCMI_I2C6>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pressure-sensor@47 {
+		compatible = "bosch,bmp580";
+		reg = <0x47>;
+		vdda-supply = <&v5v_sw>;
+		vddd-supply = <&v5v_sw>;
+	};
+
+	co2-sensor@62 {
+		compatible = "sensirion,scd41";
+		reg = <0x62>;
+		vdd-supply = <&v5v_sw>;
+	};
+
+	pm-sensor@69 {
+		compatible = "sensirion,sps30";
+		reg = <0x69>;
+	};
+};
+
+&i2s1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2s1_pins_a>;
+	pinctrl-1 = <&i2s1_sleep_pins_a>;
+	clocks = <&rcc SPI1>, <&rcc SPI1_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "i2sclk", "x8k", "x11k";
+	#clock-cells = <0>; /* Set I2S2 as master clock provider */
+	status = "okay";
+
+	i2s1_port: port {
+		i2s1_endpoint: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&codec_endpoint>;
+		};
+	};
+};
+
+&iwdg2 {
+	clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+	status = "okay";
+};
+
+&m4_rproc {
+	/delete-property/ st,syscfg-holdboot;
+	resets = <&scmi_reset RST_SCMI_MCU>,
+		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
+	reset-names = "mcu_rst", "hold_boot";
+};
+
+&mdma1 {
+	resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&rcc {
+	compatible = "st,stm32mp1-rcc-secure", "syscon";
+	clock-names = "hse", "hsi", "csi", "lse", "lsi";
+	clocks = <&scmi_clk CK_SCMI_HSE>,
+		 <&scmi_clk CK_SCMI_HSI>,
+		 <&scmi_clk CK_SCMI_CSI>,
+		 <&scmi_clk CK_SCMI_LSE>,
+		 <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+	clocks = <&scmi_clk CK_SCMI_RNG1>;
+	resets = <&scmi_reset RST_SCMI_RNG1>;
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
+
+/* SD card without Card-detect */
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	broken-cd;
+	no-sdio;
+	no-1-8-v;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+/* EMMC */
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_c &sdmmc2_d47_pins_b>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_c &sdmmc2_d47_pins_b>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_c &sdmmc2_d47_sleep_pins_b>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	no-1-8-v;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+/* Wifi */
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_c>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_c>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_c>;
+	non-removable;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&timers5 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pwm {
+		pinctrl-0 = <&pwm1_pins_d>;
+		pinctrl-1 = <&pwm1_sleep_pins_d>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_e>;
+	pinctrl-1 = <&uart4_idle_pins_e>;
+	pinctrl-2 = <&uart4_sleep_pins_e>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_d>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpioe 11 GPIO_ACTIVE_HIGH>; /* BT_REG_ON */
+		max-speed = <4000000>;
+		vbat-supply = <&v3v3>;
+		vddio-supply = <&v3v3>;
+		interrupt-parent = <&gpiog>;
+		interrupts = <12 IRQ_TYPE_EDGE_RISING>; /* BT_HOST_WAKE */
+		interrupt-names = "host-wakeup";
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp153.dtsi b/arch/arm/boot/dts/st/stm32mp153.dtsi
new file mode 100644
index 000000000000..92794b942ab2
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp153.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp151.dtsi"
+
+/ {
+	cpus {
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			clock-frequency = <650000000>;
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	arm-pmu {
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	timer {
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+&etzpc {
+	m_can1: can@4400e000 {
+		compatible = "bosch,m_can";
+		reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
+		reg-names = "m_can", "message_ram";
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+		clock-names = "hclk", "cclk";
+		resets = <&rcc FDCAN_R>;
+		bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+		access-controllers = <&etzpc 62>;
+		status = "disabled";
+	};
+
+	m_can2: can@4400f000 {
+		compatible = "bosch,m_can";
+		reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
+		reg-names = "m_can", "message_ram";
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+		clock-names = "hclk", "cclk";
+		resets = <&rcc FDCAN_R>;
+		bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
+		access-controllers = <&etzpc 62>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts b/arch/arm/boot/dts/st/stm32mp153c-dhcom-drc02.dts
index b4e504f026ce..b4e504f026ce 100644
--- a/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts
+++ b/arch/arm/boot/dts/st/stm32mp153c-dhcom-drc02.dts
diff --git a/arch/arm/boot/dts/stm32mp153c-dhcor-drc-compact.dts b/arch/arm/boot/dts/st/stm32mp153c-dhcor-drc-compact.dts
index c8b9818499ea..c8b9818499ea 100644
--- a/arch/arm/boot/dts/stm32mp153c-dhcor-drc-compact.dts
+++ b/arch/arm/boot/dts/st/stm32mp153c-dhcor-drc-compact.dts
diff --git a/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2-gen1.dts b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2-gen1.dts
new file mode 100644
index 000000000000..3a0e84262424
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2-gen1.dts
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) 2024 Leonard Göhrs, Pengutronix
+ */
+
+/dts-v1/;
+
+#include "stm32mp153c-lxa-fairytux2.dtsi"
+
+/ {
+	model = "Linux Automation GmbH FairyTux 2 Gen 1";
+	compatible = "lxa,stm32mp153c-fairytux2-gen1", "oct,stm32mp153x-osd32", "st,stm32mp153";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-left {
+			label = "USER_BTN1";
+			linux,code = <KEY_ESC>;
+			gpios = <&gpioi 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+
+		button-right {
+			label = "USER_BTN2";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpioe 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+};
+
+&gpiof {
+	gpio-line-names = "GPIO1", "GPIO2", "", "", "",			/*  0 */
+			  "", "", "", "", "",				/*  5 */
+			  "", "", "", "", "",				/* 10 */
+			  "";						/* 15 */
+};
+
+&gpioh {
+	gpio-line-names = "", "", "", "", "LCD_RESET",			/*  0 */
+			  "", "", "", "", "",				/*  5 */
+			  "", "", "", "GPIO3", "",			/* 10 */
+			  "";						/* 15 */
+};
+
+&gpioi {
+	gpio-line-names = "", "", "", "", "",				/*  0 */
+			  "", "", "", "ETH_", "",			/*  5 */
+			  "", "USER_BTN1";				/* 10 */
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_b>;
+	pinctrl-1 = <&i2c1_sleep_pins_b>;
+	status = "okay";
+
+	io_board_gpio: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&v3v3_hdmi>;
+		gpio-line-names = "LED1_GA_YK", "LED2_GA_YK", "LED1_GK_YA", "LED2_GK_YA",
+				  "RS485_EN", "RS485_120R", "", "CAN_120R";
+	};
+};
+
+&led_controller_io {
+	/*
+	 * led-2 and led-3 are internally connected antiparallel to one
+	 * another inside the ethernet jack like this:
+	 * GPIO1 ---+---|led-2|>--+--- GPIO3
+	 *          +--<|led-3|---+
+	 * E.g. only one of the LEDs can be illuminated at a time while
+	 * the other output must be driven low.
+	 * This should likely be implemented using a multi color LED
+	 * driver for antiparallel LEDs.
+	 */
+	led-2 {
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_ACTIVITY;
+		gpios = <&io_board_gpio 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	led-3 {
+		color = <LED_COLOR_ID_ORANGE>;
+		function = LED_FUNCTION_ACTIVITY;
+		gpios = <&io_board_gpio 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usart3 {
+	/*
+	 * On Gen 1 FairyTux 2 only RTS can be used and not CTS as well,
+	 * Because pins PD11 (CTS) and PI11 (USER_BTN1) share the same
+	 * interrupt and only one of them can be used at a time.
+	 */
+	rts-gpios = <&gpiod 12 GPIO_ACTIVE_LOW>;
+};
+
+&usbotg_hs {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2-gen2.dts b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2-gen2.dts
new file mode 100644
index 000000000000..66e6da912508
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2-gen2.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) 2024 Leonard Göhrs, Pengutronix
+ */
+
+/dts-v1/;
+
+#include "stm32mp153c-lxa-fairytux2.dtsi"
+
+/ {
+	model = "Linux Automation GmbH FairyTux 2 Gen 2";
+	compatible = "lxa,stm32mp153c-fairytux2-gen2", "oct,stm32mp153x-osd32", "st,stm32mp153";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-left {
+			label = "USER_BTN1";
+			linux,code = <KEY_ESC>;
+			gpios = <&gpioi 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+
+		button-right {
+			label = "USER_BTN2";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpioe 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+};
+
+&gpiof {
+	gpio-line-names = "", "", "", "", "",				/*  0 */
+			  "", "", "", "", "",				/*  5 */
+			  "", "", "", "", "",				/* 10 */
+			  "";						/* 15 */
+};
+
+&gpioh {
+	gpio-line-names = "", "", "", "", "LCD_RESET",			/*  0 */
+			  "", "", "", "", "",				/*  5 */
+			  "", "", "GPIO1", "GPIO_INT", "",		/* 10 */
+			  "";						/* 15 */
+};
+
+&gpioi {
+	gpio-line-names = "GPIO2", "", "", "", "",			/*  0 */
+			  "", "", "", "ETH_", "",			/*  5 */
+			  "", "USER_BTN1";				/* 10 */
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_b>;
+	pinctrl-1 = <&i2c1_sleep_pins_b>;
+	status = "okay";
+
+	io_board_gpio: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpioh>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&board_tca6408_pins>;
+		#interrupt-cells = <2>;
+		vcc-supply = <&v3v3_hdmi>;
+		gpio-line-names = "LED1_GA_YK", "LED2_GA_YK", "LED1_GK_YA", "USB_CC_ALERT",
+				  "RS485_EN", "RS485_120R", "USB_CC_RESET", "CAN_120R";
+	};
+
+	usb_c: typec@28 {
+		compatible = "st,stusb1600";
+		reg = <0x28>;
+		interrupt-parent = <&io_board_gpio>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&reg_5v>;
+		vsys-supply = <&v3v3_hdmi>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			typec-power-opmode = "default";
+
+			port {
+				con_usbotg_hs_ep: endpoint {
+					remote-endpoint = <&usbotg_hs_ep>;
+				};
+			};
+		};
+	};
+
+	temperature-sensor@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+		/*
+		 * The sensor itself is powered by a voltage divider from the
+		 * always-on 5V supply.
+		 * The required pull-up resistors however are on v3v3_hdmi.
+		 */
+		vs-supply = <&v3v3_hdmi>;
+	};
+
+	io_board_eeprom: eeprom@56 {
+		compatible = "atmel,24c04";
+		reg = <0x56>;
+		vcc-supply = <&v3v3_hdmi>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_controller_io {
+	led-2 {
+		color = <LED_COLOR_ID_ORANGE>;
+		function = LED_FUNCTION_ACTIVITY;
+		gpios = <&io_board_gpio 1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&usart3 {
+	rts-gpios = <&gpiod 12 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpiod 11 GPIO_ACTIVE_LOW>;
+};
+
+&usbotg_hs {
+	usb-role-switch;
+
+	port {
+		usbotg_hs_ep: endpoint {
+			remote-endpoint = <&con_usbotg_hs_ep>;
+		};
+	};
+};
+
+&pinctrl {
+	board_tca6408_pins: stusb1600-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 13, GPIO)>;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2.dtsi b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2.dtsi
new file mode 100644
index 000000000000..9eeb9d6b5eb0
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2.dtsi
@@ -0,0 +1,397 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2021 Rouven Czerwinski, Pengutronix
+ * Copyright (C) 2023, 2024 Leonard Göhrs, Pengutronix
+ */
+
+#include "stm32mp153.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xx-osd32.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		can0 = &m_can1;
+		ethernet0 = &ethernet0;
+		i2c0 = &i2c1;
+		i2c1 = &i2c4;
+		mmc1 = &sdmmc2;
+		serial0 = &uart4;
+		serial1 = &usart3;
+		spi0 = &spi4;
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&v3v3>;
+
+		brightness-levels = <0 31 63 95 127 159 191 223 255>;
+		default-brightness-level = <7>;
+		pwms = <&led_pwm 3 1000000 0>;
+	};
+
+	led-controller-cpu {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpioa 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	led_controller_io: led-controller-io {
+		compatible = "gpio-leds";
+
+		/*
+		 * led-0 and led-1 are internally connected antiparallel to one
+		 * another inside the ethernet jack like this:
+		 * GPIO0 ---+---|led-0|>--+--- GPIO2
+		 *          +--<|led-1|---+
+		 * E.g. only one of the LEDs can be illuminated at a time while
+		 * the other output must be driven low.
+		 * This should likely be implemented using a multi color LED
+		 * driver for antiparallel LEDs.
+		 */
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&io_board_gpio 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&io_board_gpio 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_1v2: regulator-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&reg_5v>;
+	};
+};
+
+baseboard_eeprom: &sip_eeprom {
+};
+
+&crc1 {
+	status = "okay";
+};
+
+&cryp1 {
+	status = "okay";
+};
+
+&dts {
+	status = "okay";
+};
+
+&ethernet0 {
+	assigned-clocks = <&rcc ETHCK_K>, <&rcc PLL4_P>;
+	assigned-clock-parents = <&rcc PLL4_P>;
+	assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF */
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ethernet0_rgmii_pins_b>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_b>;
+
+	st,eth-clk-sel;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 { /* KSZ9031RN */
+			reg = <3>;
+			reset-gpios = <&gpioe 11 GPIO_ACTIVE_LOW>; /* ETH_RST# */
+			interrupt-parent = <&gpioa>;
+			interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+			micrel,force-master;
+		};
+	};
+};
+
+&gpioa {
+	gpio-line-names = "", "", "", "", "",				/*  0 */
+			  "", "ETH_INT", "", "", "",			/*  5 */
+			  "", "", "", "BOOTROM_LED", "",		/* 10 */
+			  "";						/* 15 */
+};
+
+&gpiob {
+	gpio-line-names = "", "", "", "", "",				/*  0 */
+			  "", "", "", "", "",				/*  5 */
+			  "", "", "", "", "",				/* 10 */
+			  "";						/* 15 */
+};
+
+&gpioc {
+	gpio-line-names = "", "", "", "", "",				/*  0 */
+			  "", "", "", "", "",				/*  5 */
+			  "", "";					/* 10 */
+};
+
+&gpiod {
+	gpio-line-names = "", "", "", "", "",				/*  0 */
+			  "", "", "LCD_TE", "", "",			/*  5 */
+			  "LCD_DC", "", "", "", "",			/* 10 */
+			  "";						/* 15 */
+};
+
+&gpioe {
+	gpio-line-names = "LCD_CS", "", "", "", "",			/*  0 */
+			  "", "", "", "", "",				/*  5 */
+			  "", "", "", "", "",				/* 10 */
+			  "";						/* 15 */
+};
+
+&gpiof {
+	gpio-line-names = "GPIO1", "GPIO2", "", "", "",			/*  0 */
+			  "", "", "", "", "",				/*  5 */
+			  "", "", "", "", "",				/* 10 */
+			  "";						/* 15 */
+};
+
+&gpiog {
+	gpio-line-names = "", "", "", "", "",				/*  0 */
+			  "", "", "", "", "",				/*  5 */
+			  "", "", "", "", "",				/* 10 */
+			  "";						/* 15 */
+};
+
+&gpioz {
+	gpio-line-names = "HWID0", "HWID1", "HWID2", "HWID3", "",	/*  0 */
+			  "", "HWID4", "HWID5";				/*  5 */
+};
+
+&hash1 {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <8>;
+	status = "okay";
+};
+
+&m_can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can1_pins_b>;
+	pinctrl-1 = <&m_can1_sleep_pins_b>;
+	status = "okay";
+	termination-gpios = <&io_board_gpio 7 GPIO_ACTIVE_HIGH>;
+	termination-ohms = <120>;
+};
+
+&pmic {
+	regulators {
+		buck1-supply = <&reg_5v>;	/* VIN */
+		buck2-supply = <&reg_5v>;	/* VIN */
+		buck3-supply = <&reg_5v>;	/* VIN */
+		buck4-supply = <&reg_5v>;	/* VIN */
+		ldo2-supply = <&reg_5v>;	/* PMIC_LDO25IN */
+		ldo4-supply = <&reg_5v>;	/* VIN */
+		ldo5-supply = <&reg_5v>;	/* PMIC_LDO25IN */
+		vref_ddr-supply = <&reg_5v>;	/* VIN */
+		boost-supply = <&reg_5v>;	/* PMIC_BSTIN */
+		pwr_sw2-supply = <&bst_out>;	/* PMIC_SWIN */
+	};
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>;
+	vmmc-supply = <&v3v3>;
+
+	bus-width = <8>;
+	mmc-ddr-3_3v;
+	no-1-8-v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+
+	status = "okay";
+};
+
+&spi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi4_pins_a>;
+	cs-gpios = <&gpioe 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	lcd: display@0 {
+		compatible = "shineworld,lh133k", "panel-mipi-dbi-spi";
+		reg = <0>;
+		power-supply = <&v3v3>;
+		io-supply = <&v3v3>;
+		backlight = <&backlight>;
+		dc-gpios = <&gpiod 10 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpioh 4 GPIO_ACTIVE_HIGH>;
+		spi-3wire;
+		spi-max-frequency = <32000000>;
+
+		width-mm = <23>;
+		height-mm = <23>;
+		rotation = <180>;
+
+		panel-timing {
+			hactive = <240>;
+			vactive = <240>;
+			hback-porch = <0>;
+			vback-porch = <0>;
+
+			clock-frequency = <0>;
+			hfront-porch = <0>;
+			hsync-len = <0>;
+			vfront-porch = <0>;
+			vsync-len = <0>;
+		};
+	};
+};
+
+&timers2 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+
+	timer@1 {
+		status = "okay";
+	};
+};
+
+&timers3 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+
+	timer@2 {
+		status = "okay";
+	};
+};
+
+&timers4 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+
+	timer@3 {
+		status = "okay";
+	};
+};
+
+&timers8 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+
+	led_pwm: pwm {
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pwm8_pins_b>;
+		pinctrl-1 = <&pwm8_sleep_pins_b>;
+		status = "okay";
+	};
+};
+
+&uart4 {
+	label = "debug";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+};
+
+&usart3 {
+	label = "external";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&usart3_pins_a>;
+
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+
+	status = "okay";
+};
+
+&usbotg_hs {
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+
+	vusb_d-supply = <&vdd_usb>;
+	vusb_a-supply = <&reg18>;
+
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
+
+&v3v3_hdmi {
+	regulator-enable-ramp-delay = <1000>;
+};
diff --git a/arch/arm/boot/dts/st/stm32mp153c-lxa-tac-gen3.dts b/arch/arm/boot/dts/st/stm32mp153c-lxa-tac-gen3.dts
new file mode 100644
index 000000000000..a40b0eae8da3
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp153c-lxa-tac-gen3.dts
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2021 Rouven Czerwinski, Pengutronix
+ * Copyright (C) 2023, 2024 Leonard Göhrs, Pengutronix
+ */
+
+/dts-v1/;
+
+#include "stm32mp153.dtsi"
+#include "stm32mp15xc-lxa-tac.dtsi"
+
+/ {
+	model = "Linux Automation Test Automation Controller (TAC) Gen 3";
+	compatible = "lxa,stm32mp153c-tac-gen3", "oct,stm32mp153x-osd32", "st,stm32mp153";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&v3v3>;
+
+		brightness-levels = <0 31 63 95 127 159 191 223 255>;
+		default-brightness-level = <7>;
+		pwms = <&led_pwm 3 1000000 0>;
+	};
+
+	reg_iobus_12v: regulator-iobus-12v {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_12v>;
+		gpio = <&gpioh 13 GPIO_ACTIVE_LOW>;
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "12V_IOBUS";
+	};
+
+	led-controller-1 {
+		compatible = "pwm-leds-multicolor";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+			max-brightness = <65535>;
+
+			led-red {
+				active-low;
+				color = <LED_COLOR_ID_RED>;
+				pwms = <&led_pwm 0 1000000 0>;
+			};
+
+			led-green {
+				active-low;
+				color = <LED_COLOR_ID_GREEN>;
+				pwms = <&led_pwm 2 1000000 0>;
+			};
+
+			led-blue {
+				active-low;
+				color = <LED_COLOR_ID_BLUE>;
+				pwms = <&led_pwm 1 1000000 0>;
+			};
+		};
+	};
+
+	led-controller-2 {
+		compatible = "gpio-leds";
+
+		led-5 {
+			label = "tac:green:iobus";
+			gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-6 {
+			label = "tac:green:can";
+			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-7 {
+			label = "tac:green:out0";
+			gpios = <&gpiob 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-8 {
+			label = "tac:green:out1";
+			gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-9 {
+			label = "tac:green:uarttx";
+			gpios = <&gpiod 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-10 {
+			label = "tac:green:uartrx";
+			gpios = <&gpiof 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-11 {
+			label = "tac:green:usbh1";
+			gpios = <&gpioc 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-12 {
+			label = "tac:green:usbh2";
+			gpios = <&gpiod 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-13 {
+			label = "tac:green:usbh3";
+			gpios = <&gpiob 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-14 {
+			label = "tac:green:usbg";
+			gpios = <&gpiod 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usb-gadget";
+		};
+
+		led-15 {
+			label = "tac:green:dutpwr";
+			gpios = <&gpioa 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&board_adc1_ain_pins>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vrefbuf>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,adc-channels = <2 5 9 10 13 14 15 18>;
+		st,min-sample-time-nsecs = <5000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		channel@2 {
+			reg = <2>;
+			label = "OUT_0_FB";
+		};
+
+		channel@5 {
+			reg = <5>;
+			label = "IOBUS_CURR_FB";
+		};
+
+		channel@9 {
+			reg = <9>;
+			label = "IOBUS_VOLT_FB";
+		};
+
+		channel@10 {
+			reg = <10>;
+			label = "OUT_1_FB";
+		};
+
+		channel@13 {
+			reg = <13>;
+			label = "HOST_CURR_FB";
+		};
+
+		channel@14 {
+			reg = <14>;
+			label = "HOST_3_CURR_FB";
+		};
+
+		channel@15 {
+			reg = <15>;
+			label = "HOST_1_CURR_FB";
+		};
+
+		channel@18 {
+			reg = <18>;
+			label = "HOST_2_CURR_FB";
+		};
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <12>;
+		st,min-sample-time-nsecs = <500000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		channel@12 {
+			reg = <12>;
+			label = "TEMP_INTERNAL";
+		};
+	};
+};
+
+&gpioa {
+	gpio-line-names = "", "", "", "", "",              /*  0 */
+	"ETH_GPIO1", "ETH_INT", "", "", "",                /*  5 */
+	"", "", "", "BOOTROM_LED", "ETH_LAB_LEDRP",        /* 10 */
+	"";                                                /* 15 */
+};
+
+&gpioc {
+	gpio-line-names = "", "DUT_PWR_DISCH", "", "", "", /*  0 */
+	"", "", "", "", "",                                /*  5 */
+	"", "";                                            /* 10 */
+};
+
+&gpioe {
+	gpio-line-names = "TP35", "", "", "", "CAN_1_120R", /*  0 */
+	"", "", "USER_BTN2", "DUT_PWR_EN", "UART_TX_EN",    /*  5 */
+	"UART_RX_EN", "TP24", "", "TP25", "TP26",           /* 10 */
+	"TP27";                                             /* 15 */
+};
+
+&gpiog {
+	gpio-line-names = "ETH_RESET", "", "", "", "",               /*  0 */
+	"IOBUS_FLT_FB", "", "USER_LED2", "ETH1_PPS_A", "CAN_0_120R", /*  5 */
+	"POWER_ADC_RESET", "", "", "", "",                           /* 10 */
+	"";                                                          /* 15 */
+};
+
+&m_can2 {
+	termination-gpios = <&gpioe 4 GPIO_ACTIVE_HIGH>;
+	termination-ohms = <120>;
+};
+
+&pinctrl {
+	board_adc1_ain_pins: board-adc1-ain-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* ADC1_INP2 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ADC1_INP5 */
+				 <STM32_PINMUX('B', 0, ANALOG)>, /* ADC1_INP9 */
+				 <STM32_PINMUX('C', 0, ANALOG)>, /* ADC1_INP10 */
+				 <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1_INP13 */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ADC1_INP14 */
+				 <STM32_PINMUX('A', 3, ANALOG)>, /* ADC1_INP15 */
+				 <STM32_PINMUX('A', 4, ANALOG)>; /* ADC1_INP18 */
+		};
+	};
+};
+
+&spi2 {
+	adc@0 {
+		compatible = "ti,lmp92064";
+		reg = <0>;
+
+		reset-gpios = <&gpiog 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		shunt-resistor-micro-ohms = <15000>;
+		spi-max-frequency = <5000000>;
+		vdd-supply = <&reg_pb_3v3>;
+		vdig-supply = <&reg_pb_3v3>;
+	};
+};
+
+&timers8 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+
+	led_pwm: pwm {
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pwm8_pins_b>;
+		pinctrl-1 = <&pwm8_sleep_pins_b>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts b/arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts
new file mode 100644
index 000000000000..16b814c19350
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp153.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include "stm32mp15x-mecio1-io.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Protonic MECIO1r1";
+	compatible = "prt,mecio1r1", "st,stm32mp153";
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&clk_hse {
+	clock-frequency = <24000000>;
+};
+
+&m_can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can1_pins_b>;
+	pinctrl-1 = <&m_can1_sleep_pins_b>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157.dtsi b/arch/arm/boot/dts/st/stm32mp157.dtsi
index 54e73ccea446..97cd24227cef 100644
--- a/arch/arm/boot/dts/stm32mp157.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp157.dtsi
@@ -20,17 +20,28 @@
 		dsi: dsi@5a000000 {
 			compatible = "st,stm32-dsi";
 			reg = <0x5a000000 0x800>;
-			clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
+			clocks = <&rcc DSI>, <&clk_hse>, <&rcc DSI_PX>;
 			clock-names = "pclk", "ref", "px_clk";
+			phy-dsi-supply = <&reg18>;
 			resets = <&rcc DSI_R>;
 			reset-names = "apb";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dsi_out: endpoint {
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/st/stm32mp157a-avenger96.dts
index 8a6eaca994d1..8a6eaca994d1 100644
--- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/boot/dts/st/stm32mp157a-avenger96.dts
diff --git a/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts b/arch/arm/boot/dts/st/stm32mp157a-dhcor-avenger96.dts
index 2e3c9fbb4eb3..275167f26fd9 100644
--- a/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
+++ b/arch/arm/boot/dts/st/stm32mp157a-dhcor-avenger96.dts
@@ -13,7 +13,6 @@
 /dts-v1/;
 
 #include "stm32mp157.dtsi"
-#include "stm32mp15xc.dtsi"
 #include "stm32mp15xx-dhcor-som.dtsi"
 #include "stm32mp15xx-dhcor-avenger96.dtsi"
 
diff --git a/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
index e539cc80bef8..847b360f02fc 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts
+++ b/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board";
-	compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157a-dk1", "st,stm32mp157";
+	compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@de000000 {
@@ -30,7 +30,7 @@
 };
 
 &dsi {
-	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+	clocks = <&rcc DSI>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
 };
 
 &gpioz {
@@ -55,8 +55,16 @@
 	resets = <&scmi_reset RST_SCMI_MDMA>;
 };
 
-&mlahb {
-	resets = <&scmi_reset RST_SCMI_MCU>;
+&m4_rproc {
+	/delete-property/ st,syscfg-holdboot;
+	resets = <&scmi_reset RST_SCMI_MCU>,
+		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
+	reset-names = "mcu_rst", "hold_boot";
+};
+
+&optee {
+	interrupt-parent = <&intc>;
+	interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 };
 
 &rcc {
diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/st/stm32mp157a-dk1.dts
index 4c8be9c8eb20..0da3667ab1e0 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157a-dk1.dts
@@ -17,9 +17,6 @@
 
 	aliases {
 		ethernet0 = &ethernet0;
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart7;
 	};
 
 	chosen {
diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts b/arch/arm/boot/dts/st/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts
index 2a2829283456..df97e03d2a5a 100644
--- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts
+++ b/arch/arm/boot/dts/st/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
  * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 /dts-v1/;
@@ -46,23 +46,14 @@
 
 &dsi {
 	status = "okay";
-	phy-dsi-supply = <&reg18>;
+};
 
-	ports {
-		port@0 {
-			reg = <0>;
-			dsi_in: endpoint {
-				remote-endpoint = <&ltdc_ep0_out>;
-			};
-		};
+&dsi_in {
+	remote-endpoint = <&ltdc_ep0_out>;
+};
 
-		port@1 {
-			reg = <1>;
-			dsi_out: endpoint {
-				remote-endpoint = <&bridge_in>;
-			};
-		};
-	};
+&dsi_out {
+	remote-endpoint = <&bridge_in>;
 };
 
 &i2c6 {
@@ -104,8 +95,7 @@
 	status = "okay";
 
 	port {
-		ltdc_ep0_out: endpoint@0 {
-			reg = <0>;
+		ltdc_ep0_out: endpoint {
 			remote-endpoint = <&dsi_in>;
 		};
 	};
diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts b/arch/arm/boot/dts/st/stm32mp157a-icore-stm32mp1-ctouch2.dts
index 1f75f1d45181..60ce4425a7fd 100644
--- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
+++ b/arch/arm/boot/dts/st/stm32mp157a-icore-stm32mp1-ctouch2.dts
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
  * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts b/arch/arm/boot/dts/st/stm32mp157a-icore-stm32mp1-edimm2.2.dts
index ba92d7d8ed00..f8e404346396 100644
--- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
+++ b/arch/arm/boot/dts/st/stm32mp157a-icore-stm32mp1-edimm2.2.dts
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
  * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 /dts-v1/;
@@ -46,23 +46,14 @@
 
 &dsi {
 	status = "okay";
-	phy-dsi-supply = <&reg18>;
+};
 
-	ports {
-		port@0 {
-			reg = <0>;
-			dsi_in_ltdc: endpoint {
-				remote-endpoint = <&ltdc_out_dsi>;
-			};
-		};
+&dsi_in {
+	remote-endpoint = <&ltdc_out_dsi>;
+};
 
-		port@1 {
-			reg = <1>;
-			dsi_out_bridge: endpoint {
-				remote-endpoint = <&bridge_in_dsi>;
-			};
-		};
-	};
+&dsi_out {
+	remote-endpoint = <&bridge_in_dsi>;
 };
 
 &i2c6 {
@@ -85,7 +76,7 @@
 			port@0 {
 				reg = <0>;
 				bridge_in_dsi: endpoint {
-					remote-endpoint = <&dsi_out_bridge>;
+					remote-endpoint = <&dsi_out>;
 					data-lanes = <1 2>;
 				};
 			};
@@ -104,9 +95,8 @@
 	status = "okay";
 
 	port {
-		ltdc_out_dsi: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&dsi_in_ltdc>;
+		ltdc_out_dsi: endpoint {
+			remote-endpoint = <&dsi_in>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi b/arch/arm/boot/dts/st/stm32mp157a-icore-stm32mp1.dtsi
index 01166ccacf2b..569a7e940ecc 100644
--- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp157a-icore-stm32mp1.dtsi
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
  * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 / {
@@ -165,12 +165,12 @@
 	status = "okay";
 };
 
-&iwdg2{
+&iwdg2 {
 	timeout-sec = <32>;
 	status = "okay";
 };
 
-&m4_rproc{
+&m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
 	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
@@ -184,7 +184,7 @@
 	status = "okay";
 };
 
-&rtc{
+&rtc {
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp157a-iot-box.dts b/arch/arm/boot/dts/st/stm32mp157a-iot-box.dts
index 6a5a4af25bd9..84497026a106 100644
--- a/arch/arm/boot/dts/stm32mp157a-iot-box.dts
+++ b/arch/arm/boot/dts/st/stm32mp157a-iot-box.dts
@@ -46,7 +46,7 @@
 
 	#address-cells = <1>;
 	#size-cells = <0>;
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/boot/dts/st/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
index fae656edd820..5116a7785201 100644
--- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
+++ b/arch/arm/boot/dts/st/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
  * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 /dts-v1/;
@@ -81,8 +81,7 @@
 	status = "okay";
 
 	port {
-		ltdc_ep0_out: endpoint@0 {
-			reg = <0>;
+		ltdc_ep0_out: endpoint {
 			remote-endpoint = <&panel_in>;
 		};
 	};
diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts b/arch/arm/boot/dts/st/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
index b9d0d3d6ad15..d949559be020 100644
--- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
+++ b/arch/arm/boot/dts/st/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
  * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi b/arch/arm/boot/dts/st/stm32mp157a-microgea-stm32mp1.dtsi
index 0b85175f151e..a75f50cf7123 100644
--- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp157a-microgea-stm32mp1.dtsi
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
  * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 / {
@@ -117,12 +117,12 @@
 	status = "okay";
 };
 
-&iwdg2{
+&iwdg2 {
 	timeout-sec = <32>;
 	status = "okay";
 };
 
-&m4_rproc{
+&m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
 	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
@@ -136,7 +136,7 @@
 	status = "okay";
 };
 
-&rtc{
+&rtc {
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dts b/arch/arm/boot/dts/st/stm32mp157a-stinger96.dts
index 249a53877512..249a53877512 100644
--- a/arch/arm/boot/dts/stm32mp157a-stinger96.dts
+++ b/arch/arm/boot/dts/st/stm32mp157a-stinger96.dts
diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi
index 3a36f7fe0a2c..5c1cc48e5199 100644
--- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi
@@ -287,7 +287,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&usart2_pins_b>;
 	pinctrl-1 = <&usart2_sleep_pins_b>;
-	st,hw-flow-ctrl;
+	uart-has-rtscts;
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "okay";
@@ -297,7 +297,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_c>;
-	st,hw-flow-ctrl;
+	uart-has-rtscts;
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "okay";
@@ -313,8 +313,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dhcom-pdk2.dts
index 6dd8216c235e..6dd8216c235e 100644
--- a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-dhcom-pdk2.dts
diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts b/arch/arm/boot/dts/st/stm32mp157c-dhcom-picoitx.dts
index 7067a860aaff..7067a860aaff 100644
--- a/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-dhcom-picoitx.dts
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
index 97e4f94b0a24..43280289759d 100644
--- a/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board";
-	compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157";
+	compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@de000000 {
@@ -36,7 +36,7 @@
 
 &dsi {
 	phy-dsi-supply = <&scmi_reg18>;
-	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+	clocks = <&rcc DSI>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
 };
 
 &gpioz {
@@ -61,8 +61,16 @@
 	resets = <&scmi_reset RST_SCMI_MDMA>;
 };
 
-&mlahb {
-	resets = <&scmi_reset RST_SCMI_MCU>;
+&m4_rproc {
+	/delete-property/ st,syscfg-holdboot;
+	resets = <&scmi_reset RST_SCMI_MCU>,
+		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
+	reset-names = "mcu_rst", "hold_boot";
+};
+
+&optee {
+	interrupt-parent = <&intc>;
+	interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 };
 
 &rcc {
diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
new file mode 100644
index 000000000000..1ec3b8f2faa9
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
+	compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial3 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpioh 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cryp1 {
+	status = "okay";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "orisetech,otm8009a";
+		reg = <0>;
+		reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
+		power-supply = <&v3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_in {
+	remote-endpoint = <&ltdc_ep1_out>;
+};
+
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
+
+&hdp {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&hdp2_gpo &hdp2_pins_a>;
+	pinctrl-1 = <&hdp2_sleep_pins_a>;
+};
+
+&i2c1 {
+	touchscreen@38 {
+		compatible = "focaltech,ft6236";
+		reg = <0x38>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpiof>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <800>;
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ltdc_ep1_out: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
+&rtc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtc_rsvd_pins_a>;
+
+	rtc_lsco_pins_a: rtc-lsco-0 {
+		pins = "out2_rmp";
+		function = "lsco";
+	};
+};
+
+/* Wifi */
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+	non-removable;
+	cap-sdio-irq;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_lsco_pins_a>;
+	};
+};
+
+/* Bluetooth */
+&usart2 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart2_pins_c>;
+	pinctrl-1 = <&usart2_sleep_pins_c>;
+	pinctrl-2 = <&usart2_idle_pins_c>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+		vbat-supply = <&v3v3>;
+		vddio-supply = <&v3v3>;
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
index 9cf0a44d2f47..6f27d794d270 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter";
-	compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
+	compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157";
 
 	reserved-memory {
 		optee@fe000000 {
@@ -35,7 +35,7 @@
 };
 
 &dsi {
-	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+	clocks = <&rcc DSI>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
 };
 
 &gpioz {
@@ -60,8 +60,16 @@
 	resets = <&scmi_reset RST_SCMI_MDMA>;
 };
 
-&mlahb {
-	resets = <&scmi_reset RST_SCMI_MCU>;
+&m4_rproc {
+	/delete-property/ st,syscfg-holdboot;
+	resets = <&scmi_reset RST_SCMI_MCU>,
+		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
+	reset-names = "mcu_rst", "hold_boot";
+};
+
+&optee {
+	interrupt-parent = <&intc>;
+	interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 };
 
 &rcc {
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
index b1eb688a278a..f6c478dbd041 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
@@ -10,12 +10,17 @@
 #include "stm32mp15-pinctrl.dtsi"
 #include "stm32mp15xxaa-pinctrl.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/mfd/st,stpmic1.h>
 
 / {
 	model = "STMicroelectronics STM32MP157C eval daughter";
 	compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
 
+	aliases {
+		serial0 = &uart4;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -65,15 +70,17 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@e8000000 {
-			reg = <0xe8000000 0x8000000>;
-			no-map;
-		};
 	};
 
-	aliases {
-		serial0 = &uart4;
+	led {
+		compatible = "gpio-leds";
+		led-blue {
+			gpios = <&gpiod 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+		};
 	};
 
 	sd_switch: regulator-sd_switch {
@@ -108,10 +115,20 @@
 	vref-supply = <&vdda>;
 	status = "disabled";
 	adc1: adc@0 {
-		st,adc-channels = <0 1 6>;
-		/* 16.5 ck_cycles sampling time */
-		st,min-sample-time-nsecs = <400>;
 		status = "okay";
+		channel@0 {
+			reg = <0>;
+			/* 16.5 ck_cycles sampling time */
+			st,min-sample-time-ns = <400>;
+		};
+		channel@1 {
+			reg = <1>;
+			st,min-sample-time-ns = <400>;
+		};
+		channel@6 {
+			reg = <6>;
+			st,min-sample-time-ns = <400>;
+		};
 	};
 };
 
@@ -140,10 +157,6 @@
 	status = "okay";
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-};
-
 &hash1 {
 	status = "okay";
 };
@@ -315,6 +328,8 @@
 			<&vdev0vring1>, <&vdev0buffer>;
 	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
 	mbox-names = "vq0", "vq1", "shutdown", "detach";
+	pinctrl-names = "default";
+	pinctrl-0 = <&m4_leds_orange_pins_b>;
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts b/arch/arm/boot/dts/st/stm32mp157c-emsbc-argon.dts
index 33b3f11d24bb..a19c488cf7c8 100644
--- a/arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-emsbc-argon.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 or MIT)
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 //
 // Copyright (c) 2021 emtrion GmbH
 // Author: Reinhold Müller <reinhold.mueller@emtrion.de>.
diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
index ac53ee3c496b..4792004cab0c 100644
--- a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 or MIT)
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 //
 // Copyright (c) 2021 emtrion GmbH
 // Author: Reinhold Müller <reinhold.mueller@emtrion.de>.
@@ -68,11 +68,6 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@dc000000 {
-			reg = <0xdc000000 0x4000000>;
-			no-map;
-		};
 	};
 
 	led: gpio_leds {
@@ -102,9 +97,11 @@
 	adc1: adc@0 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&adc1_in6_pins_a>;
-		st,min-sample-time-nsecs = <5000>;
-		st,adc-channels = <6>;
 		status = "disabled";
+		channel@6 {
+			reg = <6>;
+			st,min-sample-time-ns = <5000>;
+		};
 	};
 
 	adc2: adc@100 {
@@ -173,7 +170,7 @@
 	phy-handle = <&phy0>;
 	st,eth-ref-clk-sel;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -183,10 +180,6 @@
 	};
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-};
-
 &hash1 {
 	status = "okay";
 };
@@ -317,7 +310,6 @@
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -328,7 +320,7 @@
 			vbus_otg: pwr_sw1 {
 				regulator-name = "vbus_otg";
 				interrupts = <IT_OCP_OTG 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 
 			vbus_usbh: pwr_sw2 {
@@ -375,8 +367,8 @@
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	interrupt-names = "wdg";
@@ -391,8 +383,12 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -435,12 +431,6 @@
 	pinctrl-0 = <&spi1_pins_a>;
 	cs-gpios = <&gpioz 3 0>;
 	status = "disabled";
-
-	spidev@0  {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <100000>;
-	};
 };
 
 &timers1 {
@@ -510,14 +500,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
index 3b9dd6f4ccc9..6ae391bffee5 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
@@ -11,8 +11,7 @@
 
 / {
 	model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother";
-	compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ev1", "st,stm32mp157c-ed1",
-		     "st,stm32mp157";
+	compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
 
 	reserved-memory {
 		optee@fe000000 {
@@ -37,7 +36,7 @@
 
 &dsi {
 	phy-dsi-supply = <&scmi_reg18>;
-	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+	clocks = <&rcc DSI>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
 };
 
 &gpioz {
@@ -66,8 +65,16 @@
 	resets = <&scmi_reset RST_SCMI_MDMA>;
 };
 
-&mlahb {
-	resets = <&scmi_reset RST_SCMI_MCU>;
+&m4_rproc {
+	/delete-property/ st,syscfg-holdboot;
+	resets = <&scmi_reset RST_SCMI_MCU>,
+		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
+	reset-names = "mcu_rst", "hold_boot";
+};
+
+&optee {
+	interrupt-parent = <&intc>;
+	interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 };
 
 &rcc {
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
index d142dd30e16b..8f99c30f1af1 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
@@ -8,21 +8,21 @@
 #include "stm32mp157c-ed1.dts"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/media/video-interfaces.h>
 
 / {
 	model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
 	compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
 
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	aliases {
-		serial0 = &uart4;
 		serial1 = &usart3;
 		ethernet0 = &ethernet0;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	clocks {
 		clk_ext_camera: clk-ext-camera {
 			#clock-cells = <0>;
@@ -90,7 +90,7 @@
 	port {
 		dcmi_0: endpoint {
 			remote-endpoint = <&ov5640_0>;
-			bus-type = <5>;
+			bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
 			bus-width = <8>;
 			hsync-active = <0>;
 			vsync-active = <0>;
@@ -100,26 +100,11 @@
 };
 
 &dsi {
-	phy-dsi-supply = <&reg18>;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
-	ports {
-		port@0 {
-			reg = <0>;
-			dsi_in: endpoint {
-				remote-endpoint = <&ltdc_ep0_out>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			dsi_out: endpoint {
-				remote-endpoint = <&dsi_panel_in>;
-			};
-		};
-	};
-
-	panel-dsi@0 {
+	panel@0 {
 		compatible = "raydium,rm68200";
 		reg = <0>;
 		reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
@@ -135,6 +120,14 @@
 	};
 };
 
+&dsi_in {
+	remote-endpoint = <&ltdc_ep0_out>;
+};
+
+&dsi_out {
+	remote-endpoint = <&dsi_panel_in>;
+};
+
 &ethernet0 {
 	status = "okay";
 	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
@@ -144,7 +137,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -185,7 +178,9 @@
 		reg = <0x3c>;
 		clocks = <&clk_ext_camera>;
 		clock-names = "xclk";
+		AVDD-supply = <&v2v8>;
 		DOVDD-supply = <&v2v8>;
+		DVDD-supply = <&v2v8>;
 		powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>;
 		reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
 		rotation = <180>;
@@ -239,8 +234,7 @@
 	status = "okay";
 
 	port {
-		ltdc_ep0_out: endpoint@0 {
-			reg = <0>;
+		ltdc_ep0_out: endpoint {
 			remote-endpoint = <&dsi_in>;
 		};
 	};
@@ -255,8 +249,16 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a
+		     &qspi_bk2_pins_a
+		     &qspi_cs2_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a
+		     &qspi_bk2_sleep_pins_a
+		     &qspi_cs2_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -304,6 +306,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		pinctrl-0 = <&pwm2_pins_a>;
 		pinctrl-1 = <&pwm2_sleep_pins_a>;
@@ -319,6 +324,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		pinctrl-0 = <&pwm8_pins_a>;
 		pinctrl-1 = <&pwm8_sleep_pins_a>;
@@ -334,6 +342,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		pinctrl-0 = <&pwm12_pins_a>;
 		pinctrl-1 = <&pwm12_sleep_pins_a>;
@@ -360,8 +371,15 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	/* onboard HUB */
+	hub@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		vdd-supply = <&v3v3>;
+	};
 };
 
 &usbotg_hs {
@@ -385,6 +403,11 @@
 	st,tune-squelch-level = <3>;
 	st,tune-hs-rx-offset = <2>;
 	st,no-lsfs-sc;
+
+	connector {
+		compatible = "usb-a-connector";
+		vbus-supply = <&vbus_sw>;
+	};
 };
 
 &usbphyc_port1 {
diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/st/stm32mp157c-lxa-mc1.dts
index e8d2ec41d537..eada9cf257be 100644
--- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-lxa-mc1.dts
@@ -73,7 +73,7 @@
 	};
 
 	panel: panel {
-		compatible = "edt,etm0700g0edh6", "simple-panel";
+		compatible = "edt,etm0700g0edh6";
 		backlight = <&backlight>;
 		enable-gpios = <&gpiod 4 GPIO_ACTIVE_HIGH>;
 		power-supply = <&reg_3v3>;
@@ -112,7 +112,7 @@
 	phy-handle = <&ethphy>;
 	status = "okay";
 
-	mdio0 {
+	mdio {
 		compatible = "snps,dwmac-mdio";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -161,8 +161,7 @@
 	status = "okay";
 
 	port {
-		ltdc_ep0_out: endpoint@0 {
-			reg = <0>;
+		ltdc_ep0_out: endpoint {
 			remote-endpoint = <&panel_input>;
 		};
 	};
diff --git a/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen1.dts b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen1.dts
new file mode 100644
index 000000000000..e72e42eb0eb4
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen1.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2021 Rouven Czerwinski, Pengutronix
+ * Copyright (C) 2023 Leonard Göhrs, Pengutronix
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc-lxa-tac.dtsi"
+
+/ {
+	model = "Linux Automation Test Automation Controller (TAC) Gen 1";
+	compatible = "lxa,stm32mp157c-tac-gen1", "oct,stm32mp15xx-osd32", "st,stm32mp157";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&v3v3>;
+
+		brightness-levels = <0 31 63 95 127 159 191 223 255>;
+		default-brightness-level = <7>;
+		pwms = <&backlight_pwm 1 1000000 0>;
+	};
+
+	reg_iobus_12v: regulator-iobus-12v {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_12v>;
+
+		gpio = <&gpioh 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "12V_IOBUS";
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc1_ain_pins_a>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vrefbuf>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,adc-channels = <0 1 2 5 9 10 13 15>;
+		st,min-sample-time-nsecs = <5000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		channel@0 {
+			reg = <0>;
+			label = "HOST_2_CURR_FB";
+		};
+
+		channel@1 {
+			reg = <1>;
+			label = "HOST_3_CURR_FB";
+		};
+
+		channel@2 {
+			reg = <2>;
+			label = "OUT_0_FB";
+		};
+
+		channel@5 {
+			reg = <5>;
+			label = "IOBUS_CURR_FB";
+		};
+
+		channel@9 {
+			reg = <9>;
+			label = "IOBUS_VOLT_FB";
+		};
+
+		channel@10 {
+			reg = <10>;
+			label = "OUT_1_FB";
+		};
+
+		channel@13 {
+			reg = <13>;
+			label = "HOST_CURR_FB";
+		};
+
+		channel@15 {
+			reg = <15>;
+			label = "HOST_1_CURR_FB";
+		};
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <12>;
+		st,min-sample-time-nsecs = <500000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		channel@12 {
+			reg = <12>;
+			label = "TEMP_INTERNAL";
+		};
+	};
+};
+
+&gpioa {
+	gpio-line-names = "", "", "STACK_CS2", "", "STACK_CS3", /*  0 */
+	"ETH_GPIO1", "ETH_INT", "", "", "",                     /*  5 */
+	"", "", "", "BOOTROM_LED", "ETH_LAB_LEDRP",             /* 10 */
+	"";                                                     /* 15 */
+};
+
+&gpioc {
+	gpio-line-names = "", "STACK_CS1", "", "", "", /*  0 */
+	"", "", "", "", "",                            /*  5 */
+	"", "";                                        /* 10 */
+};
+
+&gpioe {
+	gpio-line-names = "TP35", "", "", "", "CAN_1_120R", /*  0 */
+	"", "", "USER_BTN2", "TP48", "UART_TX_EN",          /*  5 */
+	"UART_RX_EN", "TP24", "", "TP25", "TP26",           /* 10 */
+	"TP27";                                             /* 15 */
+};
+
+&gpiog {
+	gpio-line-names = "ETH_RESET", "", "", "", "",               /*  0 */
+	"IOBUS_FLT_FB", "", "USER_LED2", "ETH1_PPS_A", "CAN_0_120R", /*  5 */
+	"TP49", "", "", "", "",                                      /* 10 */
+	"";                                                          /* 15 */
+};
+
+&gpu {
+	status = "disabled";
+};
+
+&i2c1 {
+	powerboard_gpio: gpio@24 {
+		compatible = "nxp,pca9570";
+		reg = <0x24>;
+
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "DUT_PWR_EN", "DUT_PWR_DISCH", "DUT_PWR_ADCRST", "";
+	};
+};
+
+&spi2 {
+	adc@0 {
+		compatible = "ti,lmp92064";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		vdd-supply = <&reg_pb_3v3>;
+		vdig-supply = <&reg_pb_3v3>;
+		reset-gpios = <&powerboard_gpio 2 GPIO_ACTIVE_HIGH>;
+
+		shunt-resistor-micro-ohms = <15000>;
+	};
+};
+
+&timers1 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+
+	backlight_pwm: pwm {
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pwm1_pins_c>;
+		pinctrl-1 = <&pwm1_sleep_pins_c>;
+
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts
new file mode 100644
index 000000000000..2ae281725a48
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2021 Rouven Czerwinski, Pengutronix
+ * Copyright (C) 2023 Leonard Göhrs, Pengutronix
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc-lxa-tac.dtsi"
+
+/ {
+	model = "Linux Automation Test Automation Controller (TAC) Gen 2";
+	compatible = "lxa,stm32mp157c-tac-gen2", "oct,stm32mp15xx-osd32", "st,stm32mp157";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&v3v3>;
+
+		brightness-levels = <0 31 63 95 127 159 191 223 255>;
+		default-brightness-level = <7>;
+		pwms = <&led_pwm 3 1000000 0>;
+	};
+
+	reg_iobus_12v: regulator-iobus-12v {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_12v>;
+		gpio = <&gpioh 13 GPIO_ACTIVE_LOW>;
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "12V_IOBUS";
+	};
+
+	led-controller-1 {
+		compatible = "pwm-leds-multicolor";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+			max-brightness = <65535>;
+
+			led-red {
+				active-low;
+				color = <LED_COLOR_ID_RED>;
+				pwms = <&led_pwm 0 1000000 0>;
+			};
+
+			led-green {
+				active-low;
+				color = <LED_COLOR_ID_GREEN>;
+				pwms = <&led_pwm 2 1000000 0>;
+			};
+
+			led-blue {
+				active-low;
+				color = <LED_COLOR_ID_BLUE>;
+				pwms = <&led_pwm 1 1000000 0>;
+			};
+		};
+	};
+
+	led-controller-2 {
+		compatible = "gpio-leds";
+
+		led-5 {
+			label = "tac:green:iobus";
+			gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-6 {
+			label = "tac:green:can";
+			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-7 {
+			label = "tac:green:out0";
+			gpios = <&gpiob 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-8 {
+			label = "tac:green:out1";
+			gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-9 {
+			label = "tac:green:uarttx";
+			gpios = <&gpiod 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-10 {
+			label = "tac:green:uartrx";
+			gpios = <&gpiof 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-11 {
+			label = "tac:green:usbh1";
+			gpios = <&gpioc 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-12 {
+			label = "tac:green:usbh2";
+			gpios = <&gpiod 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-13 {
+			label = "tac:green:usbh3";
+			gpios = <&gpiob 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-14 {
+			label = "tac:green:usbg";
+			gpios = <&gpiod 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usb-gadget";
+		};
+
+		led-15 {
+			label = "tac:green:dutpwr";
+			gpios = <&gpioa 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc1_ain_pins_a>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vrefbuf>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,adc-channels = <0 1 2 5 9 10 13 15>;
+		st,min-sample-time-nsecs = <5000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		channel@0 {
+			reg = <0>;
+			label = "HOST_2_CURR_FB";
+		};
+
+		channel@1 {
+			reg = <1>;
+			label = "HOST_3_CURR_FB";
+		};
+
+		channel@2 {
+			reg = <2>;
+			label = "OUT_0_FB";
+		};
+
+		channel@5 {
+			reg = <5>;
+			label = "IOBUS_CURR_FB";
+		};
+
+		channel@9 {
+			reg = <9>;
+			label = "IOBUS_VOLT_FB";
+		};
+
+		channel@10 {
+			reg = <10>;
+			label = "OUT_1_FB";
+		};
+
+		channel@13 {
+			reg = <13>;
+			label = "HOST_CURR_FB";
+		};
+
+		channel@15 {
+			reg = <15>;
+			label = "HOST_1_CURR_FB";
+		};
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <12>;
+		st,min-sample-time-nsecs = <500000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		channel@12 {
+			reg = <12>;
+			label = "TEMP_INTERNAL";
+		};
+	};
+};
+
+&gpioa {
+	gpio-line-names = "", "", "DUT_PWR_EN", "", "STACK_CS3", /*  0 */
+	"ETH_GPIO1", "ETH_INT", "", "", "",                      /*  5 */
+	"", "", "", "BOOTROM_LED", "ETH_LAB_LEDRP",              /* 10 */
+	"";                                                      /* 15 */
+};
+
+&gpioc {
+	gpio-line-names = "", "DUT_PWR_DISCH", "", "", "", /*  0 */
+	"", "", "", "", "",                                /*  5 */
+	"", "";                                            /* 10 */
+};
+
+&gpioe {
+	gpio-line-names = "TP35", "", "", "", "CAN_1_120R", /*  0 */
+	"", "", "USER_BTN2", "TP48", "UART_TX_EN",          /*  5 */
+	"UART_RX_EN", "TP24", "", "TP25", "TP26",           /* 10 */
+	"TP27";                                             /* 15 */
+};
+
+&gpiog {
+	gpio-line-names = "ETH_RESET", "", "", "", "",               /*  0 */
+	"IOBUS_FLT_FB", "", "USER_LED2", "ETH1_PPS_A", "CAN_0_120R", /*  5 */
+	"TP49", "", "", "", "",                                      /* 10 */
+	"";                                                          /* 15 */
+};
+
+&gpu {
+	status = "disabled";
+};
+
+&m_can2 {
+	termination-gpios = <&gpioe 4 GPIO_ACTIVE_HIGH>;
+	termination-ohms = <120>;
+};
+
+&spi2 {
+	adc@0 {
+		compatible = "ti,lmp92064";
+		reg = <0>;
+
+		reset-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		shunt-resistor-micro-ohms = <15000>;
+		spi-max-frequency = <5000000>;
+		vdd-supply = <&reg_pb_3v3>;
+		vdig-supply = <&reg_pb_3v3>;
+	};
+};
+
+&timers8 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+
+	led_pwm: pwm {
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pwm8_pins_b>;
+		pinctrl-1 = <&pwm8_sleep_pins_b>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/st/stm32mp157c-odyssey-som.dtsi
index 2d9461006810..cf7485251490 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp157c-odyssey-som.dtsi
@@ -62,11 +62,6 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@d4000000 {
-			reg = <0xd4000000 0x4000000>;
-			no-map;
-		};
 	};
 
 	led {
@@ -80,11 +75,6 @@
 	};
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-	status = "okay";
-};
-
 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
@@ -240,8 +230,8 @@
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/st/stm32mp157c-odyssey.dts
index ed66d25b8bf3..a8b3f7a54703 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-odyssey.dts
@@ -41,7 +41,7 @@
 	assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF/U-Boot */
 	st,eth-clk-sel;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
diff --git a/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts b/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts
new file mode 100644
index 000000000000..36e6055b5665
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Geanix ApS 2023 - All Rights Reserved
+ * Author: Sean Nyekjaer <sean@geanix.com>
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xx-osd32.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+/ {
+	model = "Octavo OSD32MP1 RED board";
+	compatible = "oct,stm32mp157c-osd32-red", "oct,stm32mp15xx-osd32", "st,stm32mp157";
+
+	aliases {
+		serial0 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	led-controller-0 {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "heartbeat";
+			gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&crc1 {
+	status = "okay";
+};
+
+&dts {
+	status = "okay";
+};
+
+&ethernet0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
+	phy-mode = "rgmii-id";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+	st,eth-clk-sel;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@3 {
+			reg = <3>;
+		};
+	};
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	status = "okay";
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	hdmi-transmitter@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+		reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpiog>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&ltdc_pins_e>;
+		pinctrl-1 = <&ltdc_sleep_pins_e>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sii9022_in: endpoint {
+					remote-endpoint = <&ltdc_ep0_out>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				sii9022_tx_endpoint: endpoint {
+					remote-endpoint = <&i2s2_endpoint>;
+				};
+			};
+		};
+	};
+};
+
+&i2s2 {
+	clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc CK_PER>, <&rcc PLL3_R>;
+	clock-names = "pclk", "i2sclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2s2_pins_b>;
+	pinctrl-1 = <&i2s2_sleep_pins_b>;
+	status = "okay";
+
+	i2s2_port: port {
+		i2s2_endpoint: endpoint {
+			remote-endpoint = <&sii9022_tx_endpoint>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+		};
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_ep0_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
+&m_can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can1_pins_d>;
+	pinctrl-1 = <&m_can1_sleep_pins_d>;
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpioe 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_d>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_d>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&vdd>;
+	mmc-ddr-3_3v;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&usbh_ehci {
+	status = "okay";
+};
+
+&usbh_ohci {
+	status = "okay";
+};
+
+&usbotg_hs {
+	vbus-supply = <&vbus_otg>;
+};
+
+&usbphyc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp1-3.dts b/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp1-3.dts
new file mode 100644
index 000000000000..28d7203264ce
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp1-3.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
+ * Author: Dom VOVARD <dom.vovard@linrt.com>.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp157c-phycore-stm32mp15-som.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-STM32MP1-3 Dev Board";
+	compatible = "phytec,phycore-stm32mp1-3",
+		     "phytec,phycore-stm32mp157c-som", "st,stm32mp157";
+
+	aliases {
+		mmc0 = &sdmmc1;
+		mmc1 = &sdmmc2;
+		mmc2 = &sdmmc3;
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &usart1;
+	};
+};
+
+&cryp1 {
+	status = "okay";
+};
+
+&dts {
+	status = "okay";
+};
+
+&fmc {
+	status = "disabled";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c4_eeprom {
+	status = "okay";
+};
+
+&i2c4_rtc {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+};
+
+&sdmmc2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi b/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi
new file mode 100644
index 000000000000..bf0c32027baf
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi
@@ -0,0 +1,573 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2022-2023 Steffen Trumtrar <kernel@pengutronix.de>
+ * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
+ * Author: Dom VOVARD <dom.vovard@linrt.com>.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "stm32mp15-pinctrl.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-STM32MP15 SOM";
+	compatible = "phytec,phycore-stm32mp157c-som", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		rtc0 = &i2c4_rtc;
+		rtc1 = &rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-home {
+			label = "Home";
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key-enter {
+			label = "Enter";
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "STM32MP1-PHYCORE";
+		routing =
+			"Playback", "MCLK", /* Set a route between "MCLK" and "playback" widgets */
+			"Capture", "MCLK";
+		dais = <&sai2b_port>,
+		       <&sai2a_port>;
+	};
+
+	regulator_vin: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vin";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&ethernet0 {
+	pinctrl-0 = <&ethernet0_rgmii_pins_d>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_d>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii-id";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+	st,eth-clk-sel;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			interrupt-parent = <&gpiog>;
+			interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,min-output-impedance;
+			enet-phy-lane-no-swap;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_b>;
+	pinctrl-1 = <&i2c1_sleep_pins_b>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	status = "okay";
+
+	codec@18 {
+		compatible = "ti,tlv320aic3007";
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+
+		ai3x-micbias-vg = <2>;
+
+		AVDD-supply = <&v3v3>;
+		IOVDD-supply = <&v3v3>;
+		DRVDD-supply = <&v3v3>;
+		DVDD-supply = <&v1v8_audio>;
+
+		clocks = <&sai2b>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tlv320_tx_endpoint: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&sai2b_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+
+			tlv320_rx_endpoint: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&sai2a_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+		};
+	};
+
+	touch@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpioi>;
+		vio-supply = <&v3v3>;
+		vcc-supply = <&v3v3>;
+
+		touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <1>;
+			st,touch-det-delay = <2>;
+			st,settling = <2>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+
+	leds@62 {
+		compatible = "nxp,pca9533";
+		reg = <0x62>;
+
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			type = <PCA9532_TYPE_LED>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c4_pins_a>;
+	pinctrl-1 = <&i2c4_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	pmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			buck1-supply = <&regulator_vin>;
+			buck2-supply = <&regulator_vin>;
+			buck3-supply = <&regulator_vin>;
+			buck4-supply = <&regulator_vin>;
+			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo4-supply = <&regulator_vin>;
+			ldo5-supply = <&v3v3>;
+			ldo6-supply = <&v3v3>;
+			boost-supply = <&regulator_vin>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+			};
+
+			v1v8_audio: ldo1 {
+				regulator-name = "v1v8_audio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO1 0>;
+
+			};
+
+			vdd_eth_2v5: ldo2 {
+				regulator-name = "dd_eth_2v5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO2 0>;
+
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdda: ldo5 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			vdd_eth_1v0: ldo6 {
+				regulator-name = "vdd_eth_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+				regulator-active-discharge = <1>;
+			};
+
+			vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			};
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>,
+				     <IT_PONKEY_R 0>;
+			interrupt-names = "onkey-falling",
+					  "onkey-rising";
+			power-off-time-sec = <10>;
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+		};
+	};
+
+	i2c4_eeprom: eeprom@50 {
+		compatible = "microchip,24c32",
+			     "atmel,24c32";
+		reg = <0x50>;
+	};
+
+	i2c4_rtc: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m_can2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can2_pins_a>;
+	pinctrl-1 = <&m_can2_sleep_pins_a>;
+	status = "okay";
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sai2 {
+	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sai2a_pins_b>, <&sai2b_pins_d>;
+	pinctrl-1 = <&sai2a_sleep_pins_b>, <&sai2b_sleep_pins_d>;
+	status = "okay";
+};
+
+&sai2a {
+	dma-names = "rx";
+	st,sync = <&sai2b 2>;
+	clocks = <&rcc SAI2_K>, <&sai2b>;
+	clock-names = "sai_ck", "MCLK";
+	#clock-cells = <0>;
+
+	sai2a_port: port {
+		sai2a_endpoint: endpoint {
+			remote-endpoint = <&tlv320_rx_endpoint>;
+			mclk-fs = <256>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+	};
+};
+
+&sai2b {
+	dma-names = "tx";
+	#clock-cells = <0>;
+
+	sai2b_port: port {
+		sai2b_endpoint: endpoint {
+			remote-endpoint = <&tlv320_tx_endpoint>;
+			mclk-fs = <256>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_b>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_b>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_b>;
+	cd-gpios = <&gpiof 3 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_e>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_e>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_e>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	mmc-ddr-3_3v;
+};
+
+&spi1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi1_pins_a>;
+	pinctrl-1 = <&spi1_sleep_pins_a>;
+	cs-gpios = <&gpioz 3 0>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	pinctrl-3 = <&uart4_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&usart1 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart1_pins_b &usart1_pins_a>;
+	pinctrl-1 = <&usart1_sleep_pins_b &usart1_sleep_pins_a>;
+	pinctrl-2 = <&usart1_idle_pins_b &usart1_idle_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usart3 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart3_pins_a>;
+	pinctrl-1 = <&usart3_sleep_pins_a>;
+	pinctrl-2 = <&usart3_idle_pins_a>;
+	status = "okay";
+};
+
+&usbh_ehci {
+	status = "okay";
+};
+
+&usbh_ohci {
+	status = "okay";
+};
+
+&usbotg_hs {
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts b/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts
new file mode 100644
index 000000000000..2531f4bc8ca4
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts
@@ -0,0 +1,1152 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Ultratronik GmbH 2024-2025 - All Rights Reserved
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STM STM32MP15x Ultratronik MMI_A7 board";
+	compatible = "ultratronik,stm32mp157c-ultra-fly-sbc", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+		serial1 = &uart5;
+		serial2 = &uart7;
+		serial3 = &usart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xC0000000 0x40000000>;
+	};
+
+	usb_otg_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpioh 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x2000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x2000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10044000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10044000 0x4000>;
+			no-map;
+		};
+
+		gpu_reserved: gpu@f8000000 {
+			reg = <0xf8000000 0x8000000>;
+			no-map;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "buzzer";
+			gpios = <&gpiof 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "none";
+		};
+
+		led1 {
+			label = "led1";
+			gpios = <&gpioa 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "led3";
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		key-1 {
+			label = "KEY1";
+			gpios = <&gpiod 1 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+			linux,code = <2>;
+		};
+
+		key-2 {
+			label = "KEY2";
+			gpios = <&gpiod 7 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+			linux,code = <3>;
+		};
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc1_ux_ain_pins_a>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdd>;
+	vref-supply = <&vrefbuf>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,min-sample-time-nsecs = <5000>;
+		st,adc-channels = <0 1 6 13>; /* ANA0 ANA1 PF12 PC3 */
+		status = "okay";
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <0 1 12>; /* ANA0 ANA1 INT_TEMP*/
+		st,min-sample-time-nsecs = <10000>;
+		status = "okay";
+
+		channel@12 {
+			reg = <12>;  /* Channel 12 = internal temperature sensor */
+			label = "internal_temp";
+		};
+	};
+};
+
+&dac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dac_ux_ch1_pins_a &dac_ux_ch2_pins_a>;
+	vref-supply = <&vrefbuf>;
+	status = "okay";
+
+	dac1: dac@1 {
+		status = "okay";
+	};
+
+	dac2: dac@2 {
+		status = "okay";
+	};
+};
+
+&dts {
+	compatible = "st,stm32-thermal";
+	status = "okay";
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_ux_rgmii_pins_a>;
+	pinctrl-1 = <&ethernet0_ux_rgmii_pins_sleep_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy1>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&gpioa {
+	gpio-line-names =
+	"#PMIC_IRQ", "", "", "", "DAC1", "DAC2", "", "",
+	"", "", "OTG_ID", "TIM1_4", "#LED1", "#LED2", "#LED3", "";
+};
+
+&gpiob {
+	gpio-line-names =
+	"", "", "", "", "", "", "", "",
+	"", "", "", "", "", "", "", "";
+};
+
+&gpioc {
+	gpio-line-names =
+	"#AMP_SD", "", "", "ANA5", "", "", "", "",
+	"", "", "", "", "", "PMIC_WAKEUP", "", "";
+};
+
+&gpiod {
+	gpio-line-names =
+	"#G_INT", "#TASTER1", "", "", "GPIO1", "GPIO2", "", "#TASTER2",
+	"", "", "", "", "", "", "TIM4_3", "TIM4_4";
+};
+
+&gpioe {
+	gpio-line-names =
+	"", "", "", "", "", "", "", "",
+	"", "", "PWM2", "", "", "", "", "";
+};
+
+&gpiof {
+	gpio-line-names =
+	"#SD1_CD", "SD1_WP", "BUZZER", "#DISP_POW", "BKL_POW", "#CAM_RES", "", "",
+	"", "TIM17_1N", "", "CAM_PWDN", "ANA6", "ENA_USB", "", "";
+};
+
+&gpiog {
+	gpio-line-names =
+	"#ESP_RES", "#ESP_BOOT", "GPIO3", "GPIO4", "", "", "", "",
+	"", "#TOUCH_IRQ", "", "", "", "", "", "#PCAP_RES";
+};
+
+&gpioh {
+	gpio-line-names =
+	"", "CAM_LED", "", "USB_OTG_PWR", "", "USB_OTG_OC", "", "",
+	"", "", "", "", "", "", "", "";
+};
+
+&gpioi {
+	gpio-line-names =
+	"BKL_PWM", "", "", "", "", "", "", "",
+	"#SPI_CS0", "", "", "#SPI_CS1", "", "", "", "";
+};
+
+&gpioj {
+	gpio-line-names =
+	"", "", "", "", "", "", "", "",
+	"", "", "", "", "", "", "", "";
+};
+
+&gpiok {
+	gpio-line-names =
+	"", "", "", "", "", "", "", "",
+	"", "", "", "", "", "", "", "";
+};
+
+&gpioz {
+	gpio-line-names =
+	"", "", "", "#SPI_CS2", "", "", "", "",
+	"", "", "", "", "", "", "", "";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_ux_pins_a>;
+	pinctrl-1 = <&i2c1_ux_pins_sleep_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+		epson,vdet-disable;
+		trickle-diode-disable;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c4_ux_pins_a>;
+	pinctrl-1 = <&i2c4_ux_pins_sleep_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: pmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&exti 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+
+			ldo1-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			v1v8: ldo6 {
+				regulator-name = "v1v8";
+				regulator-min-microvolt = <1600000>;/* offset +200 mv ??? */
+				regulator-max-microvolt = <1600000>;/* real 1800000 */
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+				regulator-active-discharge = <1>;
+			 };
+
+			 vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			 };
+		};
+	};
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m_can2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can2_ux_pins_a>;
+	pinctrl-1 = <&m_can2_ux_sleep_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+
+	adc1_ux_ain_pins_a: adc1-ux-ain-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F',12, ANALOG)>, /* ADC1 in6 */
+				 <STM32_PINMUX('C', 3, ANALOG)>; /* ADC2 in13 */
+		};
+	};
+
+	dac_ux_ch1_pins_a: dac-ux-ch1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
+		};
+	};
+
+	dac_ux_ch2_pins_a: dac-ux-ch2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
+		};
+	};
+
+	ethernet0_ux_rgmii_pins_a: rgmii-ux-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>; /* ETH_RGMII_TX_CTL */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins4 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	ethernet0_ux_rgmii_pins_sleep_a: rgmii-ux-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		};
+	};
+
+	i2c1_ux_pins_a: i2c1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c1_ux_pins_sleep_a: i2c1-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	m_can2_ux_pins_a: m-can2-ux-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 6, AF9)>; /* CAN1_TX */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN1_RX */
+			bias-disable;
+		};
+	};
+
+	m_can2_ux_sleep_pins_a: m-can2-ux-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, ANALOG)>, /* CAN1_TX */
+				 <STM32_PINMUX('B', 5, ANALOG)>; /* CAN1_RX */
+		};
+	};
+	pwm1_ux_pins_a: pwm1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A',11, AF1)>, /* TIM1_CH4 */
+				 <STM32_PINMUX('E',10, AF1)>; /* TIM1_CH2N */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm1_ux_sleep_pins_a: pwm1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A',11, ANALOG)>, /* TIM1_CH4 */
+				 <STM32_PINMUX('E',10, ANALOG)>; /* TIM1_CH2N */
+		};
+	};
+
+	pwm4_ux_pins_a: pwm4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */
+				 <STM32_PINMUX('D', 15, AF2)>; /* TIM4_CH4 */
+			bias-disable;
+		};
+	};
+
+	pwm4_ux_sleep_pins_a: pwm4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 14, ANALOG)>, /* TIM4_CH3 */
+				 <STM32_PINMUX('D', 15, ANALOG)>; /* TIM4_CH4 */
+		};
+	};
+
+	pwm5_ux_pins_a: pwm5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 0, AF2)>; /* TIM5_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm5_ux_sleep_pins_a: pwm5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 0, ANALOG)>; /* TIM5_CH4 */
+		};
+	};
+
+	pwm17_ux_pins_a: pwm17-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 9, AF1)>; /* TIM17_CH1N */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm17_ux_sleep_pins_a: pwm17-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 9, ANALOG)>; /* TIM17_CH1N */
+		};
+	};
+
+	qspi_bk1_ux_pins_a: qspi-bk1-ux-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('D',12, AF9)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('B',10, AF9)>; /* QSPI_BK1_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	qspi_bk1_ux_sleep_pins_a: qspi-bk1-ux-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('D',12, ANALOG)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
+				 <STM32_PINMUX('B',10, ANALOG)>; /* QSPI_BK1_NCS */
+		};
+	};
+
+	qspi_clk_ux_pins_a: qspi-clk_ux-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 7, AF9)>; /* QSPI_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+	};
+
+	qspi_clk_ux_sleep_pins_a: qspi-clk-ux-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 7, ANALOG)>; /* QSPI_CLK */
+		};
+	};
+
+	sai2a_ux_pins_a: sai2a-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('D',11, AF10)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
+				 <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sai2a_ux_sleep_pins_a: sai2a-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('D',11, ANALOG)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
+				 <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
+		};
+	};
+
+	sdmmc1_ux_b4_pins_a: sdmmc1-ux-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C',10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C',11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_ux_b4_od_pins_a: sdmmc1-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_ux_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	sdmmc2_ux_b4_pins_a: sdmmc2-ux-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				<STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				<STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				<STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+				<STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_ux_b4_od_pins_a: sdmmc2-ux-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				<STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				<STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				<STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_ux_b4_sleep_pins_a: sdmmc2-ux-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+				<STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
+				<STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+				<STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+				<STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+				<STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+		};
+	};
+
+	sdmmc2_ux_d47_pins_a: sdmmc2-ux-d47-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+				<STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+				<STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+				<STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_ux_d47_sleep_pins_a: sdmmc2-ux-d47-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				<STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+				<STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
+				<STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	uart4_ux_pins_a: uart4-ux-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_ux_idle_pins_a: uart4-ux-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+		};
+
+	uart4_ux_sleep_pins_a: uart4-ux-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
+				<STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+		};
+	};
+
+	uart5_ux_pins_a: uart5-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 13, AF14)>; /* UART5_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF14)>; /* UART5_RX */
+			bias-disable;
+		};
+	};
+
+	uart5_ux_idle_pins_a: uart5-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 13, ANALOG)>; /* UART5_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF14)>; /* UART5_RX*/
+			bias-disable;
+		};
+	};
+
+	uart5_ux_sleep_pins_a: uart5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 13, ANALOG)>, /* UART5_TX */
+				 <STM32_PINMUX('B', 12, ANALOG)>; /* UART5_RX */
+		};
+	};
+
+	uart7_ux_pins_a: uart7-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* USART7_TX */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* USART7_RX */
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('E', 9, AF7)>; /* USART7_RTS/DE */
+		};
+	};
+
+	uart7_ux_idle_pins_a: uart7-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>, /* USART7_TX */
+				 <STM32_PINMUX('E', 9, AF7)>; /* USART7_RTS/DE */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* USART7_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_ux_sleep_pins_a: uart7-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>, /* USART7_TX */
+				 <STM32_PINMUX('E', 9, AF7)>, /* USART7_RTS/DE */
+				 <STM32_PINMUX('E', 7, ANALOG)>; /* USART7_RX */
+		};
+	};
+};
+
+&pinctrl_z {
+
+	i2c4_ux_pins_a: i2c4-ux-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+				<STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c4_ux_pins_sleep_a: i2c4-1 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
+				<STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
+		};
+	};
+
+	spi1_ux_pins_a: spi1-ux-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
+				<STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+
+	spi1_ux_sleep_pins_a: spi1-ux-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 0, ANALOG)>, /* SPI1_SCK */
+				<STM32_PINMUX('Z', 1, ANALOG)>, /* SPI1_MISO */
+				<STM32_PINMUX('Z', 2, ANALOG)>; /* SPI1_MOSI */
+		};
+	};
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_ux_pins_a &qspi_bk1_ux_pins_a>;
+	pinctrl-1 = <&qspi_clk_ux_sleep_pins_a &qspi_bk1_ux_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x1000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <133000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_ux_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_ux_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_ux_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_ux_b4_pins_a &sdmmc2_ux_d47_pins_a>;
+	pinctrl-1 = <&sdmmc2_ux_b4_od_pins_a &sdmmc2_ux_d47_pins_a>;
+	pinctrl-2 = <&sdmmc2_ux_b4_sleep_pins_a &sdmmc2_ux_d47_sleep_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	mmc-ddr-3_3v;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi1_ux_pins_a>;
+	pinctrl-1 = <&spi1_ux_sleep_pins_a>;
+	status = "okay";
+	cs-gpios = <&gpioi 8 0>, <&gpioi 11 0>, <&gpioz 3 0>;
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&timers1 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm1_ux_pins_a>;
+		pinctrl-1 = <&pwm1_ux_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+
+	timer@0 {
+		status = "okay";
+	};
+};
+
+&timers4 {
+	dmas = <&dmamux1 31 0x400 0x5>;
+	dma-names = "ch3";
+	status = "okay";
+
+	pwm4_4: pwm {
+		pinctrl-0 = <&pwm4_ux_pins_a>;
+		pinctrl-1 = <&pwm4_ux_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+};
+
+&timers5 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	pwm5_4: pwm {
+		pinctrl-0 = <&pwm5_ux_pins_a>;
+		pinctrl-1 = <&pwm5_ux_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+
+	timer@4 {
+		status = "okay";
+	};
+};
+
+&timers17 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	pwm17_4: pwm {
+		pinctrl-0 = <&pwm17_ux_pins_a>;
+		pinctrl-1 = <&pwm17_ux_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+
+	timer@16 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	pinctrl-names = "default", "sleep", "idle", "no_console_suspend";
+	pinctrl-0 = <&uart4_ux_pins_a>;
+	pinctrl-1 = <&uart4_ux_sleep_pins_a>;
+	pinctrl-2 = <&uart4_ux_idle_pins_a>;
+	pinctrl-3 = <&uart4_ux_pins_a>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart5_ux_pins_a>;
+	pinctrl-1 = <&uart5_ux_sleep_pins_a>;
+	pinctrl-2 = <&uart5_ux_idle_pins_a>;
+	status = "okay";
+};
+
+&uart7 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart7_ux_pins_a>;
+	pinctrl-1 = <&uart7_ux_sleep_pins_a>;
+	pinctrl-2 = <&uart7_ux_idle_pins_a>;
+	status = "okay";
+};
+
+&usart1 {
+	/*Muxing happens in uboot*/
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbh_ohci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbotg_hs {
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	vbus-supply = <&usb_otg_vbus>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	st,tune-hs-dc-level = <2>;
+	st,enable-fs-rftime-tuning;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <15>;
+	st,trim-hs-impedance = <1>;
+	st,tune-squelch-level = <3>;
+	st,tune-hs-rx-offset = <2>;
+	st,no-lsfs-sc;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	st,tune-hs-dc-level = <2>;
+	st,enable-fs-rftime-tuning;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <15>;
+	st,trim-hs-impedance = <1>;
+	st,tune-squelch-level = <3>;
+	st,tune-hs-rx-offset = <2>;
+	st,no-lsfs-sc;
+};
+
+&vrefbuf {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	vdda-supply = <&vdd>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/st/stm32mp157f-dk2-scmi.dtsi b/arch/arm/boot/dts/st/stm32mp157f-dk2-scmi.dtsi
new file mode 100644
index 000000000000..89de85a2eff3
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp157f-dk2-scmi.dtsi
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Amelie Delaunay <amelie.delaunay@foss.st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp15-scmi.dtsi"
+
+/ {
+	reserved-memory {
+		optee@de000000 {
+			reg = <0xde000000 0x2000000>;
+			no-map;
+		};
+	};
+
+	arm_wdt: watchdog {
+		compatible = "arm,smc-wdt";
+		arm,smc-id = <0xbc000000>;
+		status = "disabled";
+	};
+
+};
+
+&adc {
+	vdd-supply = <&scmi_vdd>;
+	vdda-supply = <&scmi_vdd>;
+};
+
+&cpu0 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cryp1 {
+	clocks = <&scmi_clk CK_SCMI_CRYP1>;
+	resets = <&scmi_reset RST_SCMI_CRYP1>;
+};
+
+&cs42l51 {
+	VL-supply = <&scmi_v3v3>;
+	VD-supply = <&scmi_v1v8_audio>;
+	VA-supply = <&scmi_v1v8_audio>;
+	VAHP-supply = <&scmi_v1v8_audio>;
+};
+
+&dsi {
+	phy-dsi-supply = <&scmi_reg18>;
+	clocks = <&rcc DSI>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+};
+
+&gpioz {
+	clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+	clocks = <&scmi_clk CK_SCMI_HASH1>;
+	resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c1 {
+	hdmi-transmitter@39 {
+		iovcc-supply = <&scmi_v3v3_hdmi>;
+		cvcc12-supply = <&scmi_v1v2_hdmi>;
+	};
+};
+
+&iwdg2 {
+	clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+	status = "disabled";
+};
+
+&m4_rproc {
+	/delete-property/ st,syscfg-holdboot;
+	resets = <&scmi_reset RST_SCMI_MCU>,
+		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
+	reset-names = "mcu_rst", "hold_boot";
+};
+
+&mdma1 {
+	resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&optee {
+	interrupt-parent = <&intc>;
+	interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+};
+
+&pwr_regulators {
+	vdd-supply = <&scmi_vdd>;
+	vdd_3v3_usbfs-supply = <&scmi_vdd_usb>;
+	status = "disabled";
+};
+
+&rcc {
+	compatible = "st,stm32mp1-rcc-secure", "syscon";
+	clock-names = "hse", "hsi", "csi", "lse", "lsi";
+	clocks = <&scmi_clk CK_SCMI_HSE>,
+		 <&scmi_clk CK_SCMI_HSI>,
+		 <&scmi_clk CK_SCMI_CSI>,
+		 <&scmi_clk CK_SCMI_LSE>,
+		 <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+	clocks = <&scmi_clk CK_SCMI_RNG1>;
+	resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
+
+&scmi_reguls {
+	scmi_vddcore: regulator@3 {
+		reg = <VOLTD_SCMI_STPMIC1_BUCK1>;
+		regulator-name = "vddcore";
+	};
+
+	scmi_vdd: regulator@5 {
+		reg = <VOLTD_SCMI_STPMIC1_BUCK3>;
+		regulator-name = "vdd";
+	};
+
+	scmi_v3v3: regulator@6 {
+		reg = <VOLTD_SCMI_STPMIC1_BUCK4>;
+		regulator-name = "v3v3";
+	};
+
+	scmi_v1v8_audio: regulator@7 {
+		reg = <VOLTD_SCMI_STPMIC1_LDO1>;
+		regulator-name = "v1v8_audio";
+	};
+
+	scmi_v3v3_hdmi: regulator@8 {
+		reg = <VOLTD_SCMI_STPMIC1_LDO2>;
+		regulator-name = "v3v3_hdmi";
+	};
+
+	scmi_vdd_usb: regulator@a {
+		reg = <VOLTD_SCMI_STPMIC1_LDO4>;
+		regulator-name = "vdd_usb";
+	};
+
+	scmi_vdda: regulator@b {
+		reg = <VOLTD_SCMI_STPMIC1_LDO5>;
+		regulator-name = "vdda";
+	};
+
+	scmi_v1v2_hdmi: regulator@c {
+		reg = <VOLTD_SCMI_STPMIC1_LDO6>;
+		regulator-name = "v1v2_hdmi";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	scmi_vbus_otg: regulator@f {
+		reg = <VOLTD_SCMI_STPMIC1_PWR_SW1>;
+		regulator-name = "vbus_otg";
+	 };
+
+	 scmi_vbus_sw: regulator@10 {
+		reg = <VOLTD_SCMI_STPMIC1_PWR_SW2>;
+		regulator-name = "vbus_sw";
+	 };
+};
+
+&sdmmc1 {
+	vmmc-supply = <&scmi_v3v3>;
+};
+
+&sdmmc3 {
+	vmmc-supply = <&scmi_v3v3>;
+};
+
+&usbh_ehci {
+	hub@1 {
+		vdd-supply = <&scmi_v3v3>;
+	};
+};
+
+&usbphyc_port0 {
+	phy-supply = <&scmi_vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&scmi_vdd_usb>;
+};
+
+&vrefbuf {
+	vdda-supply = <&scmi_vdd>;
+};
diff --git a/arch/arm/boot/dts/st/stm32mp157f-dk2.dts b/arch/arm/boot/dts/st/stm32mp157f-dk2.dts
new file mode 100644
index 000000000000..8fa61e54d026
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp157f-dk2.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Amelie Delaunay <amelie.delaunay@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xf.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
+#include "stm32mp157f-dk2-scmi.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157F-DK2 Discovery Board";
+	compatible = "st,stm32mp157f-dk2", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial3 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpioh 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&arm_wdt {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&cryp1 {
+	status = "okay";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "orisetech,otm8009a";
+		reg = <0>;
+		reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
+		power-supply = <&scmi_v3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_in {
+	remote-endpoint = <&ltdc_ep1_out>;
+};
+
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
+
+&i2c1 {
+	touchscreen@38 {
+		compatible = "focaltech,ft6236";
+		reg = <0x38>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpiof>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <800>;
+	};
+};
+
+/* I2C4 is managed by OP-TEE */
+&i2c4 {
+	status = "disabled";
+
+	/* i2c4 subnodes, which won't be managed by Linux */
+	typec@28 {
+		status = "disabled";
+		connector {
+			status = "disabled";
+		};
+	};
+
+	stpmic@33 {
+		status = "disabled";
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ltdc_ep1_out: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
+&rtc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtc_rsvd_pins_a>;
+
+	rtc_lsco_pins_a: rtc-lsco-0 {
+		pins = "out2_rmp";
+		function = "lsco";
+	};
+};
+
+/* Wifi */
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+	non-removable;
+	cap-sdio-irq;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&scmi_v3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_lsco_pins_a>;
+	};
+};
+
+/* Bluetooth */
+&usart2 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart2_pins_c>;
+	pinctrl-1 = <&usart2_sleep_pins_c>;
+	pinctrl-2 = <&usart2_idle_pins_c>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+		vbat-supply = <&scmi_v3v3>;
+		vddio-supply = <&scmi_v3v3>;
+	};
+};
+
+/* Since I2C4 is disabled, STUSB1600 is also disabled so there is no Type-C support */
+&usbotg_hs {
+	dr_mode = "peripheral";
+	role-switch-default-mode = "peripheral";
+	/*
+	 * Forcing dr_mode = "peripheral"/"role-switch-default-mode = "peripheral";
+	 * will cause the pull-up on D+/D- to be raised as soon as the OTG is configured at runtime,
+	 * regardless of the presence of VBUS. Notice that on self-powered devices like
+	 * stm32mp157f-dk2, this isn't compliant with the USB standard. That's why usbotg_hs is kept
+	 * disabled here.
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi b/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi
new file mode 100644
index 000000000000..915ba2526f45
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi
@@ -0,0 +1,527 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	aliases {
+		serial0 = &uart4;
+		ethernet0 = &ethernet0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+		spi5 = &spi5;
+		spi6 = &spi6;
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xC0000000 0x10000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+	};
+
+	v3v3: regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	v5v: regulator-v5v {
+		compatible = "regulator-fixed";
+		regulator-name = "v5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&adc {
+	/* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */
+	pinctrl-0 = <&adc12_pins_mecsbc>;
+	pinctrl-names = "default";
+	vdd-supply = <&v3v3>;
+	vdda-supply = <&v3v3>;
+	vref-supply = <&v3v3>;
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+
+	channel@0 {
+		reg = <0>;
+		/* 16.5 ck_cycles sampling time */
+		st,min-sample-time-ns = <5000>;
+		label = "p24v_stp";
+	};
+
+	channel@1 {
+		reg = <1>;
+		st,min-sample-time-ns = <5000>;
+		label = "p24v_hpdcm";
+	};
+
+	channel@2 {
+		reg = <2>;
+		st,min-sample-time-ns = <5000>;
+		label = "ain0";
+	};
+
+	channel@3 {
+		reg = <3>;
+		st,min-sample-time-ns = <5000>;
+		label = "hpdcm1_i2";
+	};
+
+	channel@5 {
+		reg = <5>;
+		st,min-sample-time-ns = <5000>;
+		label = "hpout1_i";
+	};
+
+	channel@6 {
+		reg = <6>;
+		st,min-sample-time-ns = <5000>;
+		label = "ain1";
+	};
+
+	channel@9 {
+		reg = <9>;
+		st,min-sample-time-ns = <5000>;
+		label = "hpout0_i";
+	};
+
+	channel@10 {
+		reg = <10>;
+		st,min-sample-time-ns = <5000>;
+		label = "phint0_ain";
+	};
+
+	channel@13 {
+		reg = <13>;
+		st,min-sample-time-ns = <5000>;
+		label = "phint1_ain";
+	};
+
+	channel@15 {
+		reg = <15>;
+		st,min-sample-time-ns = <5000>;
+		label = "hpdcm0_i1";
+	};
+
+	channel@16 {
+		reg = <16>;
+		st,min-sample-time-ns = <5000>;
+		label = "lsin";
+	};
+
+	channel@18 {
+		reg = <18>;
+		st,min-sample-time-ns = <5000>;
+		label = "hpdcm0_i2";
+	};
+
+	channel@19 {
+		reg = <19>;
+		st,min-sample-time-ns = <5000>;
+		label = "hpdcm1_i1";
+	};
+};
+
+&adc2 {
+	status = "okay";
+
+	channel@2 {
+		reg = <2>;
+		/* 16.5 ck_cycles sampling time */
+		st,min-sample-time-ns = <5000>;
+		label = "ain2";
+	};
+
+	channel@6 {
+		reg = <6>;
+		st,min-sample-time-ns = <5000>;
+		label = "ain3";
+	};
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_x>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_x>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii-id";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+	st,eth-clk-sel;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@8 {
+			reg = <8>;
+			interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpiog 10 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10>;
+			reset-deassert-us = <35>;
+		};
+	};
+};
+
+&gpiod {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "STP_RESETN", "STP_ENABLEN", "HPOUT0", "HPOUT0_ALERTN";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_d_mecsbc>;
+};
+
+&gpioe {
+	gpio-line-names = "HPOUT0_RESETN", "HPOUT1", "HPOUT1_ALERTN", "",
+			  "", "", "HPOUT1_RESETN",
+			  "LPOUT0", "LPOUT0_ALERTN", "GPOUT0_RESETN",
+			  "LPOUT1", "LPOUT1_ALERTN", "GPOUT1_RESETN",
+			  "LPOUT2", "LPOUT2_ALERTN", "GPOUT2_RESETN";
+};
+
+&gpiof {
+	gpio-line-names = "LPOUT3", "LPOUT3_ALERTN", "GPOUT3_RESETN",
+			  "LPOUT4", "LPOUT4_ALERTN", "GPOUT4_RESETN",
+			  "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpiog {
+	gpio-line-names = "LPOUT5", "LPOUT5_ALERTN", "", "LPOUT5_RESETN",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpioh {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "GPIO0_RESETN", "", "", "",
+			  "", "", "", "";
+};
+
+&gpioi {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "HPDCM0_SLEEPN", "HPDCM1_SLEEPN", "GPIO1_RESETN", "",
+			  "", "", "", "";
+};
+
+&gpioj {
+	gpio-line-names = "HSIN10", "HSIN11", "HSIN12", "HSIN13",
+			  "HSIN14", "HSIN15", "", "",
+			  "", "", "", "",
+			  "", "RTD_RESETN", "", "";
+};
+
+&gpiok {
+	gpio-line-names = "", "", "HSIN0", "HSIN1",
+			  "HSIN2", "HSIN3", "HSIN4", "HSIN5";
+};
+
+&gpioz {
+	gpio-line-names = "", "", "", "HSIN6",
+			  "HSIN7", "HSIN8", "HSIN9", "";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-1 = <&i2c2_sleep_pins_a>;
+	status = "okay";
+
+	gpio0: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "HSIN0_BIAS", "HSIN1_BIAS", "HSIN2_BIAS", "HSIN3_BIAS",
+				  "", "", "HSIN_VREF0_LVL", "HSIN_VREF1_LVL",
+				  "HSIN4_BIAS", "HSIN5_BIAS", "HSIN6_BIAS", "HSIN9_BIAS",
+				  "", "", "", "";
+	};
+
+	gpio1: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "HSIN8_BIAS", "HSIN9_BIAS", "HSIN10_BIAS", "HSIN11_BIAS",
+				  "", "", "HSIN_VREF2_LVL", "HSIN_VREF3_LVL",
+				  "HSIN12_BIAS", "HSIN13_BIAS", "HSIN14_BIAS", "HSIN15_BIAS",
+				  "", "", "LSIN8_BIAS", "LSIN9_BIAS";
+	};
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <104000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&{qspi_bk1_pins_a/pins} {
+	pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+		 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+		 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+		 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+	/delete-property/ bias-disable;
+	bias-pull-up;
+};
+
+&timers1 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	hpdcm0_pwm: pwm {
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pwm1_pins_mecio1>;
+		pinctrl-1 = <&pwm1_sleep_pins_mecio1>;
+		status = "okay";
+	};
+};
+
+&timers8 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	hpdcm1_pwm: pwm {
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pwm8_pins_mecio1>;
+		pinctrl-1 = <&pwm8_sleep_pins_mecio1>;
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&{uart4_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
+};
+
+&{uart4_pins_a/pins2} {
+	pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+	/delete-property/ bias-disable;
+	bias-pull-up;
+};
+
+&usbotg_hs {
+	dr_mode = "host";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	vbus-supply = <&v5v>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&v3v3>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&v3v3>;
+};
+
+&pinctrl {
+	adc12_pins_mecsbc: adc12-ain-mecsbc-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* ADC1_INP2 */
+				 <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1_INP6 */
+				 <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2_INP2 */
+				 <STM32_PINMUX('F', 14, ANALOG)>, /* ADC2_INP6 */
+				 <STM32_PINMUX('A', 0, ANALOG)>, /* ADC1_INP16 */
+				 <STM32_PINMUX('A', 3, ANALOG)>, /* ADC1_INP15 */
+				 <STM32_PINMUX('A', 4, ANALOG)>, /* ADC1_INP18 */
+				 <STM32_PINMUX('A', 5, ANALOG)>, /* ADC1_INP19 */
+				 <STM32_PINMUX('A', 6, ANALOG)>, /* ADC1_INP3 */
+				 <STM32_PINMUX('B', 0, ANALOG)>, /* ADC1_INP9 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ADC1_INP5 */
+				 <STM32_PINMUX('C', 0, ANALOG)>, /* ADC1_INP10 */
+				 <STM32_PINMUX('C', 3, ANALOG)>; /* ADC1_INP13 */
+		};
+	};
+
+	pinctrl_hog_d_mecsbc: hog-d-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, GPIO)>; /* STP_RESETn */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm1_pins_mecio1: pwm1-mecio1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */
+				 <STM32_PINMUX('A', 8, AF1)>; /* TIM1_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm1_sleep_pins_mecio1: pwm1-sleep-mecio1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* TIM1_CH1 */
+				 <STM32_PINMUX('A', 8, ANALOG)>; /* TIM1_CH2 */
+		};
+	};
+
+	pwm8_pins_mecio1: pwm8-mecio1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, AF3)>, /* TIM8_CH1 */
+				 <STM32_PINMUX('I', 6, AF3)>; /* TIM8_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm8_sleep_pins_mecio1: pwm8-sleep-mecio1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* TIM8_CH1 */
+				 <STM32_PINMUX('I', 6, ANALOG)>; /* TIM8_CH2 */
+		};
+	};
+
+	ethernet0_rgmii_pins_x: rgmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('B', 13, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('B', 8, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rgmii_sleep_pins_x: rgmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 12, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('B', 13, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('B', 8, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
new file mode 100644
index 000000000000..154698f87b0e
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
@@ -0,0 +1,518 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2021 Rouven Czerwinski, Pengutronix
+ * Copyright (C) 2023 Leonard Göhrs, Pengutronix
+ */
+
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xx-osd32.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		can0 = &m_can1;
+		can1 = &m_can2;
+		ethernet0 = &ethernet0;
+		ethernet1 = &port_uplink;
+		ethernet2 = &port_dut;
+		i2c0 = &i2c1;
+		i2c1 = &i2c4;
+		i2c2 = &i2c5;
+		mmc1 = &sdmmc2;
+		serial0 = &uart4;
+		serial1 = &usart3;
+		spi0 = &spi2;
+		spi1 = &spi4;
+		spi2 = &spi5;
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	led-controller-0 {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "tac:green:user1";
+			gpios = <&gpiof 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "tac:green:user2";
+			gpios = <&gpiog 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "tac:green:statusdut";
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+		};
+
+		/* led-3 and led-4 are internally connected antiparallel to one
+		 * another inside the ethernet jack like this:
+		 * GPIOA14 ---+---|led-3|>--+--- GPIOD15
+		 *            +--<|led-4|---+
+		 * E.g. only one of the LEDs can be illuminated at a time while
+		 * the other output must be driven low.
+		 * This should likely be implemented using a multi color LED
+		 * driver for antiparallel LEDs.
+		 */
+		led-3 {
+			label = "tac:green:statuslab";
+			gpios = <&gpioa 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			label = "tac:orange:statuslab";
+			gpios = <&gpiod 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-lower {
+			label = "USER_BTN2";
+			linux,code = <KEY_ESC>;
+			gpios = <&gpioe 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+
+		button-upper {
+			label = "USER_BTN";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpioi 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+
+	/* supplied by either barrel connector or PoE */
+	reg_12v: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_12v>;
+	};
+
+	reg_1v2: regulator-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&reg_5v>;
+	};
+
+	reg_pb_5v: regulator-pb-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_POWERBOARD";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_5v>;
+	};
+
+	reg_pb_3v3: regulator-pb-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_POWERBOARD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_pb_5v>;
+	};
+
+	output-iobus-12v {
+		compatible = "regulator-output";
+		vout-supply = <&reg_iobus_12v>;
+	};
+
+	output-vuart {
+		compatible = "regulator-output";
+		vout-supply = <&v3v3_hdmi>;
+	};
+};
+
+baseboard_eeprom: &sip_eeprom {
+};
+
+&crc1 {
+	status = "okay";
+};
+
+&cryp1 {
+	status = "okay";
+};
+
+&dts {
+	status = "okay";
+};
+
+&ethernet0 {
+	assigned-clocks = <&rcc ETHCK_K>, <&rcc PLL4_P>;
+	assigned-clock-parents = <&rcc PLL4_P>;
+	assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF */
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ethernet0_rgmii_pins_e>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_e>;
+
+	st,eth-clk-sel;
+	phy-mode = "rgmii-id";
+
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&ethernet0_rgmii_pins_e {
+	pins1 {
+		/* Reduce EMI emission by reducing RGMII drive strength */
+		slew-rate = <1>;
+	};
+};
+
+&gpiob {
+	gpio-line-names = "", "", "", "", "", /*  0 */
+	"", "USB_RESET", "", "", "",          /*  5 */
+	"", "", "", "", "",                   /* 10 */
+	"";                                   /* 15 */
+};
+
+&gpiod {
+	gpio-line-names = "", "", "", "", "TP38", /*  0 */
+	"TP39", "", "", "TP41", "TP42",           /*  5 */
+	"OLED_DC", "", "", "ETH_CS", "",          /* 10 */
+	"ETH_LAB_LEDRN";                          /* 15 */
+};
+
+&gpiof {
+	gpio-line-names = "TP36", "TP37", "", "", "OLED_CS", /*  0 */
+	"", "", "", "", "",                                  /*  5 */
+	"USER_LED1", "", "STACK_CS0", "", "",                /* 10 */
+	"";                                                  /* 15 */
+};
+
+&gpioh {
+	gpio-line-names = "", "", "OUT_1", "OUT_0", "OLED_RESET", /*  0 */
+	"", "", "", "", "",                                       /*  5 */
+	"ETH1_PPS_B", "ETH_GPIO2", "", "IOBUS_PWR_EN", "",        /* 10 */
+	"TP33";                                                   /* 15 */
+};
+
+&gpioi {
+	gpio-line-names = "TIM_RTS", "", "", "", "DEVICE_DATA_EN", /*  0 */
+	"", "", "", "ETH_WOL", "TP43",                             /*  5 */
+	"", "USER_BTN";                                            /* 10 */
+};
+
+&gpioz {
+	gpio-line-names = "HWID0", "HWID1", "HWID2", "HWID3", "", /*  0 */
+	"", "HWID4", "HWID5";                                     /*  5 */
+};
+
+&hash1 {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_b>;
+	pinctrl-1 = <&i2c1_sleep_pins_b>;
+	status = "okay";
+
+	powerboard_eeprom: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		vcc-supply = <&v3v3>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+		status = "disabled";
+	};
+};
+
+&i2c5 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_b>;
+	pinctrl-1 = <&i2c5_sleep_pins_b>;
+
+	status = "okay";
+
+	usbhub: usbhub@2c {
+		compatible = "microchip,usb2514b";
+		reg = <0x2c>;
+		vdd-supply = <&v3v3>;
+		reset-gpios = <&gpiob 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&iwdg2 {
+	timeout-sec = <8>;
+	status = "okay";
+};
+
+&m_can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can1_pins_b>;
+	pinctrl-1 = <&m_can1_sleep_pins_b>;
+	status = "okay";
+};
+
+&m_can2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can2_pins_a>;
+	pinctrl-1 = <&m_can2_sleep_pins_a>;
+	status = "okay";
+};
+
+&pmic {
+	regulators {
+		buck1-supply = <&reg_5v>;	/* VIN */
+		buck2-supply = <&reg_5v>;	/* VIN */
+		buck3-supply = <&reg_5v>;	/* VIN */
+		buck4-supply = <&reg_5v>;	/* VIN */
+		ldo2-supply = <&reg_5v>;	/* PMIC_LDO25IN */
+		ldo4-supply = <&reg_5v>;	/* VIN */
+		ldo5-supply = <&reg_5v>;	/* PMIC_LDO25IN */
+		vref_ddr-supply = <&reg_5v>;	/* VIN */
+		boost-supply = <&reg_5v>;	/* PMIC_BSTIN */
+		pwr_sw2-supply = <&bst_out>;	/* PMIC_SWIN */
+	};
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>;
+	vmmc-supply = <&v3v3>;
+
+	bus-width = <8>;
+	mmc-ddr-3_3v;
+	no-1-8-v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_c>;
+	cs-gpios = <&gpiof 12 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&spi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi4_pins_a>;
+	cs-gpios = <&gpiof 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	lcd: display@0 {
+		compatible = "shineworld,lh133k", "panel-mipi-dbi-spi";
+		reg = <0>;
+		power-supply = <&v3v3>;
+		io-supply = <&v3v3>;
+		backlight = <&backlight>;
+		dc-gpios = <&gpiod 10 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpioh 4 GPIO_ACTIVE_HIGH>;
+		spi-3wire;
+		spi-max-frequency = <32000000>;
+
+		width-mm = <23>;
+		height-mm = <23>;
+		rotation = <180>;
+
+		panel-timing {
+			hactive = <240>;
+			vactive = <240>;
+			hback-porch = <0>;
+			vback-porch = <0>;
+
+			clock-frequency = <0>;
+			hfront-porch = <0>;
+			hsync-len = <0>;
+			vfront-porch = <0>;
+			vsync-len = <0>;
+		};
+	};
+};
+
+&spi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi5_pins_a>;
+
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	cs-gpios = <&gpiod 13 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+
+	switch: switch@0 {
+		compatible = "microchip,ksz9563";
+		reg = <0>;
+
+		reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>;
+		spi-max-frequency = <44000000>;
+
+		interrupt-parent = <&gpioa>;
+		interrupts = <6 IRQ_TYPE_EDGE_RISING>;
+
+		/* Reduce RGMII EMI emissions by reducing drive strength */
+		microchip,hi-drive-strength-microamp = <2000>;
+		microchip,lo-drive-strength-microamp = <8000>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port_dut: port@0 {
+				reg = <0>;
+				label = "dut";
+			};
+
+			port_uplink: port@1 {
+				reg = <1>;
+				label = "uplink";
+			};
+
+			port_cpu: port@2 {
+				reg = <2>;
+				label = "cpu";
+
+				ethernet = <&ethernet0>;
+
+				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <2000>;
+				tx-internal-delay-ps = <2000>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&timers2 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+
+	timer@1 {
+		status = "okay";
+	};
+};
+
+&timers3 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+
+	timer@2 {
+		status = "okay";
+	};
+};
+
+&timers4 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+
+	timer@3 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	label = "debug";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+};
+
+&usart3 {
+	label = "dut";
+	uart-has-rtscts;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&usart3_pins_f>;
+
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+};
+
+&usbh_ehci {
+	status = "okay";
+};
+
+&usbotg_hs {
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+
+	vusb_d-supply = <&vdd_usb>;
+	vusb_a-supply = <&reg18>;
+
+	g-rx-fifo-size = <512>;
+	g-np-tx-fifo-size = <32>;
+	g-tx-fifo-size = <128 128 64 16 16 16 16 16>;
+
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&vrefbuf {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	vdda-supply = <&vdda>;
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/st/stm32mp15xc.dtsi b/arch/arm/boot/dts/st/stm32mp15xc.dtsi
new file mode 100644
index 000000000000..97465717f932
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp15xc.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&etzpc {
+	cryp1: cryp@54001000 {
+		compatible = "st,stm32mp1-cryp";
+		reg = <0x54001000 0x400>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rcc CRYP1>;
+		resets = <&rcc CRYP1_R>;
+		access-controllers = <&etzpc 9>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp15xf.dtsi b/arch/arm/boot/dts/st/stm32mp15xf.dtsi
new file mode 100644
index 000000000000..ffa55d64bea3
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp15xf.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+&etzpc {
+	cryp1: cryp@54001000 {
+		compatible = "st,stm32mp1-cryp";
+		reg = <0x54001000 0x400>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rcc CRYP1>;
+		resets = <&rcc CRYP1_R>;
+		access-controllers = <&etzpc 9>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
index 35b1034aa3cf..52c4e69597a4 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
@@ -6,18 +6,6 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pwm/pwm.h>
 
-/ {
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart8;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
 &adc {
 	status = "disabled";
 };
@@ -74,7 +62,6 @@
 	pinctrl-0 = <&i2c2_pins_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
 	/* spare dmas for other usage */
 	/delete-property/dmas;
 	/delete-property/dma-names;
@@ -152,7 +139,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
index 5f586f024060..5c77202ee196 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
@@ -7,16 +7,6 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart8;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	clk_ext_audio_codec: clock-codec {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -30,7 +20,6 @@
 		default-brightness-level = <8>;
 		enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
 		power-supply = <&reg_panel_bl>;
-		status = "okay";
 	};
 
 	gpio-keys-polled {
@@ -137,12 +126,14 @@
 
 	sound {
 		compatible = "audio-graph-card";
-		routing =
-			"MIC_IN", "Capture",
-			"Capture", "Mic Bias",
-			"Playback", "HP_OUT";
+		widgets = "Headphone", "Headphone Jack",
+			  "Line", "Line In Jack",
+			  "Microphone", "Microphone Jack";
+		routing = "Headphone Jack", "HP_OUT",
+			  "LINE_IN", "Line In Jack",
+			  "MIC_IN", "Microphone Jack",
+			  "Microphone Jack", "Mic Bias";
 		dais = <&sai2a_port &sai2b_port>;
-		status = "okay";
 	};
 };
 
@@ -157,7 +148,6 @@
 	pinctrl-0 = <&i2c2_pins_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
 	/* spare dmas for other usage */
 	/delete-property/dmas;
 	/delete-property/dma-names;
@@ -189,15 +179,11 @@
 			sgtl5000_tx_endpoint: endpoint@0 {
 				reg = <0>;
 				remote-endpoint = <&sai2a_endpoint>;
-				frame-master = <&sgtl5000_tx_endpoint>;
-				bitclock-master = <&sgtl5000_tx_endpoint>;
 			};
 
 			sgtl5000_rx_endpoint: endpoint@1 {
 				reg = <1>;
 				remote-endpoint = <&sai2b_endpoint>;
-				frame-master = <&sgtl5000_rx_endpoint>;
-				bitclock-master = <&sgtl5000_rx_endpoint>;
 			};
 		};
 
@@ -242,10 +228,12 @@
 		sai2a_port: port {
 			sai2a_endpoint: endpoint {
 				remote-endpoint = <&sgtl5000_tx_endpoint>;
-				format = "i2s";
-				mclk-fs = <512>;
+				bitclock-master;
+				dai-format = "i2s";
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <16>;
+				frame-master;
+				mclk-fs = <256>;
 			};
 		};
 	};
@@ -260,10 +248,12 @@
 		sai2b_port: port {
 			sai2b_endpoint: endpoint {
 				remote-endpoint = <&sgtl5000_rx_endpoint>;
-				format = "i2s";
-				mclk-fs = <512>;
+				bitclock-master;
+				dai-format = "i2s";
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <16>;
+				frame-master;
+				mclk-fs = <256>;
 			};
 		};
 	};
@@ -302,7 +292,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
index abc595350e71..01c693cc0344 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
@@ -7,16 +7,6 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart8;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	led {
 		compatible = "gpio-leds";
 
@@ -119,12 +109,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
index 238a611192e7..4cc633683c6b 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
@@ -14,6 +14,13 @@
 		ethernet1 = &ksz8851;
 		rtc0 = &hwrtc;
 		rtc1 = &rtc;
+		serial0 = &uart4;
+		serial1 = &uart8;
+		serial2 = &usart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@c0000000 {
@@ -80,17 +87,19 @@
 	vdda-supply = <&vdda>;
 	vref-supply = <&vdda>;
 	status = "okay";
+};
 
-	adc1: adc@0 {
-		st,min-sample-time-nsecs = <5000>;
-		st,adc-channels = <0>;
-		status = "okay";
+&adc1 {
+	channel@0 {
+		reg = <0>;
+		st,min-sample-time-ns = <5000>;
 	};
+};
 
-	adc2: adc@100 {
-		st,adc-channels = <1>;
-		st,min-sample-time-nsecs = <5000>;
-		status = "okay";
+&adc2 {
+	channel@1 {
+		reg = <1>;
+		st,min-sample-time-ns = <5000>;
 	};
 };
 
@@ -125,7 +134,7 @@
 	max-speed = <100>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -260,7 +269,6 @@
 		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		status = "okay";
 
 		regulators {
 			compatible = "st,stpmic1-regulators";
@@ -379,7 +387,6 @@
 			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
 			interrupt-names = "onkey-falling", "onkey-rising";
 			power-off-time-sec = <10>;
-			status = "okay";
 		};
 
 		watchdog {
@@ -414,8 +421,8 @@
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
@@ -428,8 +435,12 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi
index 90933077d66d..aceeff6c38ba 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi
@@ -66,7 +66,6 @@
 		led4 {
 			label = "green:user3";
 			gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
 			default-state = "off";
 			panic-indicator;
 		};
@@ -88,7 +87,7 @@
 
 	sound {
 		compatible = "audio-graph-card";
-		label = "STM32MP1-AV96-HDMI";
+		label = "STM32-AV96-HDMI";
 		dais = <&sai2a_port>;
 		status = "okay";
 	};
@@ -100,7 +99,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpioz 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
@@ -112,17 +111,39 @@
 	vdda-supply = <&vdda>;
 	vref-supply = <&vdda>;
 	status = "okay";
+};
 
-	adc1: adc@0 {
-		st,adc-channels = <0 1 6>;
-		st,min-sample-time-nsecs = <5000>;
-		status = "okay";
+&adc1 {
+	channel@0 {
+		reg = <0>;
+		st,min-sample-time-ns = <5000>;
 	};
 
-	adc2: adc@100 {
-		st,adc-channels = <0 1 2>;
-		st,min-sample-time-nsecs = <5000>;
-		status = "okay";
+	channel@1 {
+		reg = <1>;
+		st,min-sample-time-ns = <5000>;
+	};
+
+	channel@6 {
+		reg = <6>;
+		st,min-sample-time-ns = <5000>;
+	};
+};
+
+&adc2 {
+	channel@0 {
+		reg = <0>;
+		st,min-sample-time-ns = <5000>;
+	};
+
+	channel@1 {
+		reg = <1>;
+		st,min-sample-time-ns = <5000>;
+	};
+
+	channel@2 {
+		reg = <2>;
+		st,min-sample-time-ns = <5000>;
 	};
 };
 
@@ -151,7 +172,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -322,6 +343,12 @@
 			};
 		};
 	};
+
+	dh_mac_eeprom: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
 };
 
 &ltdc {
@@ -331,11 +358,7 @@
 	status = "okay";
 
 	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ltdc_ep0_out: endpoint@0 {
-			reg = <0>;
+		ltdc_ep0_out: endpoint {
 			remote-endpoint = <&adv7513_in>;
 		};
 	};
@@ -359,7 +382,7 @@
 		sai2a_port: port {
 			sai2a_endpoint: endpoint {
 				remote-endpoint = <&adv7513_i2s0>;
-				format = "i2s";
+				dai-format = "i2s";
 				mclk-fs = <256>;
 			};
 		};
@@ -412,7 +435,7 @@
 
 	#address-cells = <1>;
 	#size-cells = <0>;
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
@@ -453,7 +476,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&usart2_pins_a>;
 	pinctrl-1 = <&usart2_sleep_pins_a>;
-	st,hw-flow-ctrl;
+	uart-has-rtscts;
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "okay";
@@ -466,8 +489,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi
index 27477bb219de..bc4ddcbdd5cf 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi
@@ -57,15 +57,35 @@
 	status = "okay";
 
 	adc1: adc@0 {
-		st,adc-channels = <0 1 6>;
-		st,min-sample-time-nsecs = <5000>;
 		status = "okay";
+		channel@0 {
+			reg = <0>;
+			st,min-sample-time-ns = <5000>;
+		};
+		channel@1 {
+			reg = <1>;
+			st,min-sample-time-ns = <5000>;
+		};
+		channel@6 {
+			reg = <6>;
+			st,min-sample-time-ns = <5000>;
+		};
 	};
 
 	adc2: adc@100 {
-		st,adc-channels = <0 1 2>;
-		st,min-sample-time-nsecs = <5000>;
 		status = "okay";
+		channel@0 {
+			reg = <0>;
+			st,min-sample-time-ns = <5000>;
+		};
+		channel@1 {
+			reg = <1>;
+			st,min-sample-time-ns = <5000>;
+		};
+		channel@2 {
+			reg = <2>;
+			st,min-sample-time-ns = <5000>;
+		};
 	};
 };
 
@@ -78,7 +98,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -192,6 +212,12 @@
 		reg = <0x50>;
 		pagesize = <16>;
 	};
+
+	dh_mac_eeprom: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
 };
 
 &sdmmc1 {	/* MicroSD */
@@ -286,12 +312,10 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
 &usbh_ohci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-io1v8.dtsi
index 9937b28548c2..9937b28548c2 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-io1v8.dtsi
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-som.dtsi
index 134a798ad3f2..89881a26c614 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-som.dtsi
@@ -213,12 +213,6 @@
 			status = "disabled";
 		};
 	};
-
-	eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
 };
 
 &ipcc {
@@ -233,8 +227,8 @@
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
@@ -247,8 +241,12 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x200000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi
new file mode 100644
index 000000000000..6e79c4b6fe32
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		mmc0 = &sdmmc1;
+		mmc1 = &sdmmc2;
+		serial0 = &uart4;
+		serial1 = &uart7;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sd_switch: regulator-sd_switch {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_switch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+		regulator-always-on;
+
+		gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1>,
+			 <2900000 0x0>;
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc12_ain_pins_b>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vdda>;
+	status = "okay";
+
+	adc1: adc@0 {
+		status = "okay";
+		channel@0 {
+			reg = <0>;
+			st,min-sample-time-ns = <5000>;
+		};
+		channel@1 {
+			reg = <1>;
+			st,min-sample-time-ns = <5000>;
+		};
+		channel@6 {
+			reg = <6>;
+			st,min-sample-time-ns = <5000>;
+		};
+	};
+
+	adc2: adc@100 {
+		status = "okay";
+		channel@0 {
+			reg = <0>;
+			st,min-sample-time-ns = <5000>;
+		};
+		channel@1 {
+			reg = <1>;
+			st,min-sample-time-ns = <5000>;
+		};
+		channel@2 {
+			reg = <2>;
+			st,min-sample-time-ns = <5000>;
+		};
+	};
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_c>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_c>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <1000>;
+		reset-post-delay-us = <1000>;
+
+		phy0: ethernet-phy@7 {
+			reg = <7>;
+
+			rxc-skew-ps = <1500>;
+			rxdv-skew-ps = <540>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <420>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <420>;
+
+			txc-skew-ps = <1440>;
+			txen-skew-ps = <540>;
+			txd0-skew-ps = <420>;
+			txd1-skew-ps = <420>;
+			txd2-skew-ps = <420>;
+			txd3-skew-ps = <420>;
+		};
+	};
+};
+
+&i2c4 {
+	dh_mac_eeprom: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
+	cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	vqmmc-supply = <&sd_switch>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_b>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	uart-has-rtscts;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&usbh_ehci {
+	status = "okay";
+};
+
+&usbh_ohci {
+	status = "okay";
+};
+
+&usbotg_hs {
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phy-names = "usb2-phy";
+	phys = <&usbphyc_port1 0>;
+	status = "okay";
+	vbus-supply = <&vbus_otg>;
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
index 8b48d3c89a04..8cea6facd27b 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
@@ -8,6 +8,12 @@
 #include <dt-bindings/mfd/st,stpmic1.h>
 
 / {
+	aliases {
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart7;
+	};
+
 	memory@c0000000 {
 		device_type = "memory";
 		reg = <0xc0000000 0x20000000>;
@@ -53,11 +59,6 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@d4000000 {
-			reg = <0xd4000000 0x4000000>;
-			no-map;
-		};
 	};
 
 	led {
@@ -72,7 +73,7 @@
 
 	sound {
 		compatible = "audio-graph-card";
-		label = "STM32MP1-DK";
+		label = "STM32MP15-DK";
 		routing =
 			"Playback" , "MCLK",
 			"Capture" , "MCLK",
@@ -92,28 +93,39 @@
 
 &adc {
 	pinctrl-names = "default";
-	pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
+	pinctrl-0 = <&adc12_usb_cc_pins_a>;
 	vdd-supply = <&vdd>;
 	vdda-supply = <&vdd>;
 	vref-supply = <&vrefbuf>;
-	status = "disabled";
+	status = "okay";
 	adc1: adc@0 {
+		status = "okay";
 		/*
 		 * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
 		 * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
 		 * 5 * (56 + 47kOhms) * 5pF => 2.5us.
 		 * Use arbitrary margin here (e.g. 5us).
 		 */
-		st,min-sample-time-nsecs = <5000>;
-		/* AIN connector, USB Type-C CC1 & CC2 */
-		st,adc-channels = <0 1 6 13 18 19>;
-		status = "okay";
+		channel@18 {
+			reg = <18>;
+			st,min-sample-time-ns = <5000>;
+		};
+		channel@19 {
+			reg = <19>;
+			st,min-sample-time-ns = <5000>;
+		};
 	};
 	adc2: adc@100 {
-		/* AIN connector, USB Type-C CC1 & CC2 */
-		st,adc-channels = <0 1 2 6 18 19>;
-		st,min-sample-time-nsecs = <5000>;
 		status = "okay";
+		/* USB Type-C CC1 & CC2 */
+		channel@18 {
+			reg = <18>;
+			st,min-sample-time-ns = <5000>;
+		};
+		channel@19 {
+			reg = <19>;
+			st,min-sample-time-ns = <5000>;
+		};
 	};
 };
 
@@ -141,7 +153,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -151,10 +163,6 @@
 	};
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-};
-
 &hash1 {
 	status = "okay";
 };
@@ -246,7 +254,7 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 
-	stusb1600@28 {
+	stusb1600: typec@28 {
 		compatible = "st,stusb1600";
 		reg = <0x28>;
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
@@ -382,21 +390,21 @@
 				regulator-always-on;
 			};
 
-			 bst_out: boost {
+			bst_out: boost {
 				regulator-name = "bst_out";
 				interrupts = <IT_OCP_BOOST 0>;
-			 };
+			};
 
 			vbus_otg: pwr_sw1 {
 				regulator-name = "vbus_otg";
 				interrupts = <IT_OCP_OTG 0>;
-			 };
+			};
 
-			 vbus_sw: pwr_sw2 {
+			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
 				regulator-active-discharge = <1>;
-			 };
+			};
 		};
 
 		onkey {
@@ -438,7 +446,7 @@
 	i2s2_port: port {
 		i2s2_endpoint: endpoint {
 			remote-endpoint = <&sii9022_tx_endpoint>;
-			format = "i2s";
+			dai-format = "i2s";
 			mclk-fs = <256>;
 		};
 	};
@@ -460,8 +468,7 @@
 	status = "okay";
 
 	port {
-		ltdc_ep0_out: endpoint@0 {
-			reg = <0>;
+		ltdc_ep0_out: endpoint {
 			remote-endpoint = <&sii9022_in>;
 		};
 	};
@@ -472,6 +479,8 @@
 			<&vdev0vring1>, <&vdev0buffer>;
 	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
 	mbox-names = "vq0", "vq1", "shutdown", "detach";
+	pinctrl-names = "default";
+	pinctrl-0 = <&m4_leds_orange_pins_a>;
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
@@ -501,15 +510,14 @@
 	sai2a: audio-controller@4400b004 {
 		#clock-cells = <0>;
 		dma-names = "tx";
-		clocks = <&rcc SAI2_K>;
-		clock-names = "sai_ck";
 		status = "okay";
 
 		sai2a_port: port {
 			sai2a_endpoint: endpoint {
 				remote-endpoint = <&cs42l51_tx_endpoint>;
-				format = "i2s";
+				dai-format = "i2s";
 				mclk-fs = <256>;
+				system-clock-direction-out;
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <32>;
 			};
@@ -526,7 +534,7 @@
 		sai2b_port: port {
 			sai2b_endpoint: endpoint {
 				remote-endpoint = <&cs42l51_rx_endpoint>;
-				format = "i2s";
+				dai-format = "i2s";
 				mclk-fs = <256>;
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <32>;
@@ -565,6 +573,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		pinctrl-0 = <&pwm1_pins_a>;
 		pinctrl-1 = <&pwm1_sleep_pins_a>;
@@ -580,6 +591,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		pinctrl-0 = <&pwm3_pins_a>;
 		pinctrl-1 = <&pwm3_sleep_pins_a>;
@@ -595,6 +609,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
 		pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
@@ -610,6 +627,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		pinctrl-0 = <&pwm5_pins_a>;
 		pinctrl-1 = <&pwm5_sleep_pins_a>;
@@ -625,6 +645,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	timer@5 {
 		status = "okay";
 	};
@@ -634,6 +657,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		pinctrl-0 = <&pwm12_pins_a>;
 		pinctrl-1 = <&pwm12_sleep_pins_a>;
@@ -675,7 +701,6 @@
 };
 
 &usbh_ehci {
-	phys = <&usbphyc_port0>;
 	status = "okay";
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-osd32.dtsi
index 935b7084b5a2..2022a1fa31ca 100644
--- a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-osd32.dtsi
@@ -117,18 +117,14 @@
 				regulator-name = "v1v8_audio";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
 				interrupts = <IT_CURLIM_LDO1 0>;
-
 			};
 
 			v3v3_hdmi: ldo2 {
 				regulator-name = "v3v3_hdmi";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
 				interrupts = <IT_CURLIM_LDO2 0>;
-
 			};
 
 			vtt_ddr: ldo3 {
@@ -156,9 +152,7 @@
 				regulator-name = "v1v2_hdmi";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
 				interrupts = <IT_CURLIM_LDO6 0>;
-
 			};
 
 			vref_ddr: vref_ddr {
@@ -210,8 +204,8 @@
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
@@ -220,3 +214,16 @@
 &rng1 {
 	status = "okay";
 };
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
diff --git a/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp15xxaa-pinctrl.dtsi
index 04f7a43ad66f..04f7a43ad66f 100644
--- a/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xxaa-pinctrl.dtsi
diff --git a/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp15xxab-pinctrl.dtsi
index 328dad140e9b..328dad140e9b 100644
--- a/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xxab-pinctrl.dtsi
diff --git a/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp15xxac-pinctrl.dtsi
index 7eaa245f44db..7eaa245f44db 100644
--- a/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xxac-pinctrl.dtsi
diff --git a/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp15xxad-pinctrl.dtsi
index b63e207de216..b63e207de216 100644
--- a/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xxad-pinctrl.dtsi
diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts
deleted file mode 100644
index 9c79982ee7ba..000000000000
--- a/arch/arm/boot/dts/stih407-b2120.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
- */
-/dts-v1/;
-#include "stih407.dtsi"
-#include "stihxxx-b2120.dtsi"
-/ {
-	model = "STiH407 B2120";
-	compatible = "st,stih407-b2120", "st,stih407";
-
-	chosen {
-		stdout-path = &sbc_serial0;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	aliases {
-		serial0 = &sbc_serial0;
-		ethernet0 = &ethernet0;
-	};
-
-};
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
deleted file mode 100644
index 350bcfcf498b..000000000000
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ /dev/null
@@ -1,210 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics R&D Limited
- */
-#include <dt-bindings/clock/stih407-clks.h>
-/ {
-	/*
-	 * Fixed 30MHz oscillator inputs to SoC
-	 */
-	clk_sysin: clk-sysin {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <30000000>;
-	};
-
-	clk_tmdsout_hdmi: clk-tmdsout-hdmi {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * A9 PLL.
-		 */
-		clockgen-a9@92b0000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x92b0000 0x10000>;
-
-			clockgen_a9_pll: clockgen-a9-pll {
-				#clock-cells = <1>;
-				compatible = "st,stih407-clkgen-plla9";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_m_a9: clk-m-a9 {
-				#clock-cells = <0>;
-				compatible = "st,stih407-clkgen-a9-mux";
-
-				clocks = <&clockgen_a9_pll 0>,
-					 <&clockgen_a9_pll 0>,
-					 <&clk_s_c0_flexgen 13>,
-					 <&clk_m_a9_ext2f_div2>;
-
-				/*
-				 * ARM Peripheral clock for timers
-				 */
-				arm_periph_clk: clk-m-a9-periphs {
-					#clock-cells = <0>;
-					compatible = "fixed-factor-clock";
-
-					clocks = <&clk_m_a9>;
-					clock-div = <2>;
-					clock-mult = <1>;
-				};
-			};
-		};
-
-		clockgen-a@90ff000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x90ff000 0x1000>;
-
-			clk_s_a0_pll: clk-s-a0-pll {
-				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0-a0";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_a0_flexgen: clk-s-a0-flexgen {
-				compatible = "st,flexgen", "st,flexgen-stih407-a0";
-
-				#clock-cells = <1>;
-
-				clocks = <&clk_s_a0_pll 0>,
-					 <&clk_sysin>;
-			};
-		};
-
-		clk_s_c0: clockgen-c@9103000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x9103000 0x1000>;
-
-			clk_s_c0_pll0: clk-s-c0-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0-c0";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_c0_pll1: clk-s-c0-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgen-pll1-c0";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_c0_quadfs: clk-s-c0-quadfs {
-				#clock-cells = <1>;
-				compatible = "st,quadfs-pll";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_c0_flexgen: clk-s-c0-flexgen {
-				#clock-cells = <1>;
-				compatible = "st,flexgen", "st,flexgen-stih407-c0";
-
-				clocks = <&clk_s_c0_pll0 0>,
-					 <&clk_s_c0_pll1 0>,
-					 <&clk_s_c0_quadfs 0>,
-					 <&clk_s_c0_quadfs 1>,
-					 <&clk_s_c0_quadfs 2>,
-					 <&clk_s_c0_quadfs 3>,
-					 <&clk_sysin>;
-
-				/*
-				 * ARM Peripheral clock for timers
-				 */
-				clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
-					#clock-cells = <0>;
-					compatible = "fixed-factor-clock";
-
-					clocks = <&clk_s_c0_flexgen 13>;
-
-					clock-output-names = "clk-m-a9-ext2f-div2";
-
-					clock-div = <2>;
-					clock-mult = <1>;
-				};
-			};
-		};
-
-		clockgen-d0@9104000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x9104000 0x1000>;
-
-			clk_s_d0_quadfs: clk-s-d0-quadfs {
-				#clock-cells = <1>;
-				compatible = "st,quadfs-d0";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_d0_flexgen: clk-s-d0-flexgen {
-				#clock-cells = <1>;
-				compatible = "st,flexgen", "st,flexgen-stih407-d0";
-
-				clocks = <&clk_s_d0_quadfs 0>,
-					 <&clk_s_d0_quadfs 1>,
-					 <&clk_s_d0_quadfs 2>,
-					 <&clk_s_d0_quadfs 3>,
-					 <&clk_sysin>;
-			};
-		};
-
-		clockgen-d2@9106000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x9106000 0x1000>;
-
-			clk_s_d2_quadfs: clk-s-d2-quadfs {
-				#clock-cells = <1>;
-				compatible = "st,quadfs-d2";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_d2_flexgen: clk-s-d2-flexgen {
-				#clock-cells = <1>;
-				compatible = "st,flexgen", "st,flexgen-stih407-d2";
-
-				clocks = <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>,
-					 <&clk_s_d2_quadfs 2>,
-					 <&clk_s_d2_quadfs 3>,
-					 <&clk_sysin>,
-					 <&clk_sysin>,
-					 <&clk_tmdsout_hdmi>;
-			};
-		};
-
-		clockgen-d3@9107000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x9107000 0x1000>;
-
-			clk_s_d3_quadfs: clk-s-d3-quadfs {
-				#clock-cells = <1>;
-				compatible = "st,quadfs-d3";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_d3_flexgen: clk-s-d3-flexgen {
-				#clock-cells = <1>;
-				compatible = "st,flexgen", "st,flexgen-stih407-d3";
-
-				clocks = <&clk_s_d3_quadfs 0>,
-					 <&clk_s_d3_quadfs 1>,
-					 <&clk_s_d3_quadfs 2>,
-					 <&clk_s_d3_quadfs 3>,
-					 <&clk_sysin>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
deleted file mode 100644
index aca43d2bdaad..000000000000
--- a/arch/arm/boot/dts/stih407.dtsi
+++ /dev/null
@@ -1,145 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 STMicroelectronics Limited.
- * Author: Gabriel Fernandez <gabriel.fernandez@linaro.org>
- */
-#include "stih407-clock.dtsi"
-#include "stih407-family.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-/ {
-	soc {
-		sti-display-subsystem@0 {
-			compatible = "st,sti-display-subsystem";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0>;
-			assigned-clocks = <&clk_s_d2_quadfs 0>,
-					  <&clk_s_d2_quadfs 1>,
-					  <&clk_s_c0_pll1 0>,
-					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
-					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
-					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
-					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP2>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP3>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP4>;
-
-			assigned-clock-parents = <0>,
-						 <0>,
-						 <0>,
-						 <&clk_s_c0_pll1 0>,
-						 <&clk_s_c0_pll1 0>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 1>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>;
-
-			assigned-clock-rates = <297000000>,
-					       <108000000>,
-					       <0>,
-					       <400000000>,
-					       <400000000>;
-
-			ranges;
-
-			sti-compositor@9d11000 {
-				compatible = "st,stih407-compositor";
-				reg = <0x9d11000 0x1000>;
-
-				clock-names = "compo_main",
-					      "compo_aux",
-					      "pix_main",
-					      "pix_aux",
-					      "pix_gdp1",
-					      "pix_gdp2",
-					      "pix_gdp3",
-					      "pix_gdp4",
-					      "main_parent",
-					      "aux_parent";
-
-				clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
-					 <&clk_s_c0_flexgen CLK_COMPO_DVP>,
-					 <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
-					 <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP1>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP2>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP3>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP4>,
-					 <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>;
-
-				reset-names = "compo-main", "compo-aux";
-				resets = <&softreset STIH407_COMPO_SOFTRESET>,
-					 <&softreset STIH407_COMPO_SOFTRESET>;
-				st,vtg = <&vtg_main>, <&vtg_aux>;
-			};
-
-			sti-tvout@8d08000 {
-				compatible = "st,stih407-tvout";
-				reg = <0x8d08000 0x1000>;
-				reg-names = "tvout-reg";
-				reset-names = "tvout";
-				resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
-						  <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
-						  <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
-						  <&clk_s_d0_flexgen CLK_PCM_0>,
-						  <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
-						  <&clk_s_d2_flexgen CLK_HDDAC>;
-
-				assigned-clock-parents = <&clk_s_d2_quadfs 0>,
-							 <&clk_tmdsout_hdmi>,
-							 <&clk_s_d2_quadfs 0>,
-							 <&clk_s_d0_quadfs 0>,
-							 <&clk_s_d2_quadfs 0>,
-							 <&clk_s_d2_quadfs 0>;
-			};
-
-			sti_hdmi: sti-hdmi@8d04000 {
-				compatible = "st,stih407-hdmi";
-				reg = <0x8d04000 0x1000>;
-				reg-names = "hdmi-reg";
-				#sound-dai-cells = <0>;
-				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "irq";
-				clock-names = "pix",
-					      "tmds",
-					      "phy",
-					      "audio",
-					      "main_parent",
-					      "aux_parent";
-
-				clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
-					 <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
-					 <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
-					 <&clk_s_d0_flexgen CLK_PCM_0>,
-					 <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>;
-
-				hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
-				reset-names = "hdmi";
-				resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
-				ddc = <&hdmiddc>;
-			};
-
-			sti-hda@8d02000 {
-				compatible = "st,stih407-hda";
-				reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
-				reg-names = "hda-reg", "video-dacs-ctrl";
-				clock-names = "pix",
-					      "hddac",
-					      "main_parent",
-					      "aux_parent";
-				clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
-					 <&clk_s_d2_flexgen CLK_HDDAC>,
-					 <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
deleted file mode 100644
index 538ff98ca1b1..000000000000
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Peter Griffin <peter.griffin@linaro.org>
- */
-/dts-v1/;
-#include "stih410.dtsi"
-#include "stihxxx-b2120.dtsi"
-/ {
-	model = "STiH410 B2120";
-	compatible = "st,stih410-b2120", "st,stih410";
-
-	chosen {
-		stdout-path = &sbc_serial0;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	aliases {
-		serial0 = &sbc_serial0;
-		ethernet0 = &ethernet0;
-	};
-
-	usb2_picophy1: phy2 {
-		status = "okay";
-	};
-
-	usb2_picophy2: phy3 {
-		status = "okay";
-	};
-
-	soc {
-
-		mmc0: sdhci@9060000 {
-			max-frequency = <200000000>;
-			sd-uhs-sdr50;
-			sd-uhs-sdr104;
-			sd-uhs-ddr50;
-		};
-
-		ohci0: usb@9a03c00 {
-			status = "okay";
-		};
-
-		ehci0: usb@9a03e00 {
-			status = "okay";
-		};
-
-		ohci1: usb@9a83c00 {
-			status = "okay";
-		};
-
-		ehci1: usb@9a83e00 {
-			status = "okay";
-		};
-
-		sti-display-subsystem@0 {
-			sti-hda@8d02000 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
deleted file mode 100644
index 2aa94605d3d4..000000000000
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ /dev/null
@@ -1,206 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
- */
-#include <dt-bindings/clock/stih407-clks.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/media/c8sectpfe.h>
-/ {
-	leds {
-		compatible = "gpio-leds";
-		red {
-			label = "Front Panel LED";
-			gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-		green {
-			gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	sound: sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "STI-B2120";
-		status = "okay";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		simple-audio-card,dai-link@0 {
-			reg = <0>;
-			/* HDMI */
-			format = "i2s";
-			mclk-fs = <128>;
-			cpu {
-				sound-dai = <&sti_uni_player0>;
-			};
-
-			codec {
-				sound-dai = <&sti_hdmi>;
-			};
-		};
-
-		simple-audio-card,dai-link@1 {
-			reg = <1>;
-			/* DAC */
-			format = "i2s";
-			mclk-fs = <256>;
-			frame-inversion;
-			cpu {
-				sound-dai = <&sti_uni_player2>;
-			};
-
-			codec {
-				sound-dai = <&sti_sasg_codec 1>;
-			};
-		};
-
-		simple-audio-card,dai-link@2 {
-			reg = <2>;
-			/* SPDIF */
-			format = "left_j";
-			mclk-fs = <128>;
-			cpu {
-				sound-dai = <&sti_uni_player3>;
-			};
-
-			codec {
-				sound-dai = <&sti_sasg_codec 0>;
-			};
-		};
-	};
-
-	miphy28lp_phy: miphy28lp {
-
-		phy_port0: port@9b22000 {
-			st,osc-rdy;
-		};
-
-		phy_port1: port@9b2a000 {
-			st,osc-force-ext;
-		};
-	};
-
-	soc {
-		sbc_serial0: serial@9530000 {
-			status = "okay";
-		};
-
-		pwm0: pwm@9810000 {
-			status = "okay";
-		};
-
-		pwm1: pwm@9510000 {
-			status = "okay";
-		};
-
-		ssc2: i2c@9842000 {
-			status = "okay";
-			clock-frequency = <100000>;
-			st,i2c-min-scl-pulse-width-us = <0>;
-			st,i2c-min-sda-pulse-width-us = <5>;
-		};
-
-		ssc3: i2c@9843000 {
-			status = "okay";
-			clock-frequency = <100000>;
-			st,i2c-min-scl-pulse-width-us = <0>;
-			st,i2c-min-sda-pulse-width-us = <5>;
-		};
-
-		i2c@9844000 {
-			status = "okay";
-		};
-
-		i2c@9845000 {
-			status = "okay";
-		};
-
-		i2c@9540000 {
-			status = "okay";
-		};
-
-		mmc0: sdhci@9060000 {
-			non-removable;
-			status = "okay";
-		};
-
-		mmc1: sdhci@9080000 {
-			status = "okay";
-		};
-
-		/* SSC11 to HDMI */
-		hdmiddc: i2c@9541000 {
-			status = "okay";
-			/* HDMI V1.3a supports Standard mode only */
-			clock-frequency = <100000>;
-			st,i2c-min-scl-pulse-width-us = <0>;
-			st,i2c-min-sda-pulse-width-us = <5>;
-		};
-
-		st_dwc3: dwc3@8f94000 {
-			status = "okay";
-		};
-
-		ethernet0: dwmac@9630000 {
-			st,tx-retime-src = "clkgen";
-			status = "okay";
-			phy-mode = "rgmii";
-			fixed-link = <0 1 1000 0 0>;
-		};
-
-		demux@8a20000 {
-			compatible	= "st,stih407-c8sectpfe";
-			status		= "okay";
-			reg		= <0x08a20000 0x10000>,
-					  <0x08a00000 0x4000>;
-			reg-names	= "c8sectpfe", "c8sectpfe-ram";
-			interrupts	= <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-					  <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "c8sectpfe-error-irq",
-					  "c8sectpfe-idle-irq";
-			pinctrl-0	= <&pinctrl_tsin0_serial>;
-			pinctrl-1	= <&pinctrl_tsin0_parallel>;
-			pinctrl-2	= <&pinctrl_tsin3_serial>;
-			pinctrl-3	= <&pinctrl_tsin4_serial_alt3>;
-			pinctrl-4	= <&pinctrl_tsin5_serial_alt1>;
-			pinctrl-names	= "tsin0-serial",
-					  "tsin0-parallel",
-					  "tsin3-serial",
-					  "tsin4-serial",
-					  "tsin5-serial";
-			clocks		= <&clk_s_c0_flexgen CLK_PROC_STFE>;
-			clock-names	= "c8sectpfe";
-
-			/* tsin0 is TSA on NIMA */
-			tsin0: port {
-				tsin-num = <0>;
-				serial-not-parallel;
-				i2c-bus = <&ssc2>;
-				reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
-				dvb-card = <STV0367_TDA18212_NIMA_1>;
-			};
-		};
-
-		sti_uni_player0: sti-uni-player@8d80000 {
-			status = "okay";
-		};
-
-		sti_uni_player2: sti-uni-player@8d82000 {
-			status = "okay";
-		};
-
-		sti_uni_player3: sti-uni-player@8d85000 {
-			status = "okay";
-		};
-
-		syscfg_core: core-syscfg@92b0000 {
-			sti_sasg_codec: sti-sasg-codec {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spdif_out>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
deleted file mode 100644
index 8f37aefa7315..000000000000
--- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
+++ /dev/null
@@ -1,289 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
- * Author: Alexandre Torgue  <alexandre.torgue@st.com> for STMicroelectronics.
- */
-
-#include <dt-bindings/pinctrl/stm32-pinfunc.h>
-#include <dt-bindings/mfd/stm32f7-rcc.h>
-
-/ {
-	soc {
-		pinctrl: pinctrl@40020000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x40020000 0x3000>;
-			interrupt-parent = <&exti>;
-			st,syscfg = <&syscfg 0x8>;
-			pins-are-numbered;
-
-			gpioa: gpio@40020000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>;
-				st,bank-name = "GPIOA";
-			};
-
-			gpiob: gpio@40020400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x400 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>;
-				st,bank-name = "GPIOB";
-			};
-
-			gpioc: gpio@40020800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x800 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>;
-				st,bank-name = "GPIOC";
-			};
-
-			gpiod: gpio@40020c00 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0xc00 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>;
-				st,bank-name = "GPIOD";
-			};
-
-			gpioe: gpio@40021000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1000 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>;
-				st,bank-name = "GPIOE";
-			};
-
-			gpiof: gpio@40021400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1400 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>;
-				st,bank-name = "GPIOF";
-			};
-
-			gpiog: gpio@40021800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1800 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>;
-				st,bank-name = "GPIOG";
-			};
-
-			gpioh: gpio@40021c00 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1c00 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>;
-				st,bank-name = "GPIOH";
-			};
-
-			gpioi: gpio@40022000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2000 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>;
-				st,bank-name = "GPIOI";
-			};
-
-			gpioj: gpio@40022400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2400 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>;
-				st,bank-name = "GPIOJ";
-			};
-
-			gpiok: gpio@40022800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2800 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>;
-				st,bank-name = "GPIOK";
-			};
-
-			cec_pins_a: cec-0 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */
-					slew-rate = <0>;
-					drive-open-drain;
-					bias-disable;
-				};
-			};
-
-			usart1_pins_a: usart1-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
-					bias-disable;
-				};
-			};
-
-			usart1_pins_b: usart1-1 {
-				pins1 {
-					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('B', 7, AF7)>; /* USART1_RX */
-					bias-disable;
-				};
-			};
-
-			i2c1_pins_b: i2c1-0 {
-				pins {
-					pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */
-						 <STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			usbotg_hs_pins_a: usbotg-hs-0 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
-						 <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
-						 <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
-						 <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
-						 <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
-						 <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
-						 <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
-						 <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
-						 <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
-						 <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
-						 <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
-						 <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-
-			usbotg_hs_pins_b: usbotg-hs-1 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
-						 <STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */
-						 <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
-						 <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
-						 <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
-						 <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
-						 <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
-						 <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
-						 <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
-						 <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
-						 <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
-						 <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-
-			usbotg_fs_pins_a: usbotg-fs-0 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
-						 <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
-						 <STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-
-			sdio_pins_a: sdio-pins-a-0 {
-				pins {
-					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
-						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
-						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1 D2 */
-						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1 D3 */
-						 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1 CLK */
-						 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1 CMD */
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-
-			sdio_pins_od_a: sdio-pins-od-a-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
-						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
-						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1 D2 */
-						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1 D3 */
-						 <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1 CLK */
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-
-				pins2 {
-					pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1 CMD */
-					drive-open-drain;
-					slew-rate = <2>;
-				};
-			};
-
-			sdio_pins_b: sdio-pins-b-0 {
-				pins {
-					pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
-						 <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
-						 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2 D2 */
-						 <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2 D3 */
-						 <STM32_PINMUX('D', 6, AF11)>, /* SDMMC2 CLK */
-						 <STM32_PINMUX('D', 7, AF11)>; /* SDMMC2 CMD */
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-
-			sdio_pins_od_b: sdio-pins-od-b-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
-						 <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
-						 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2 D2 */
-						 <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2 D3 */
-						 <STM32_PINMUX('D', 6, AF11)>; /* SDMMC2 CLK */
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-
-				pins2 {
-					pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC2 CMD */
-					drive-open-drain;
-					slew-rate = <2>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts
deleted file mode 100644
index c11616ed5fc6..000000000000
--- a/arch/arm/boot/dts/stm32f746-disco.dts
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright 2017 - Vikas MANOCHA <vikas.manocha@st.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "stm32f746.dtsi"
-#include "stm32f746-pinctrl.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "STMicroelectronics STM32F746-DISCO board";
-	compatible = "st,stm32f746-disco", "st,stm32f746";
-
-	chosen {
-		bootargs = "root=/dev/ram";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@c0000000 {
-		device_type = "memory";
-		reg = <0xC0000000 0x800000>;
-	};
-
-	aliases {
-		serial0 = &usart1;
-	};
-
-	usbotg_hs_phy: usb-phy {
-		#phy-cells = <0>;
-		compatible = "usb-nop-xceiv";
-		clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>;
-		clock-names = "main_clk";
-	};
-
-	/* This turns on vbus for otg fs for host mode (dwc2) */
-	vcc5v_otg_fs: vcc5v-otg-fs-regulator {
-		compatible = "regulator-fixed";
-		gpio = <&gpiod 5 0>;
-		regulator-name = "vcc5_host1";
-		regulator-always-on;
-	};
-
-	mmc_vcard: mmc_vcard {
-		compatible = "regulator-fixed";
-		regulator-name = "mmc_vcard";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&clk_hse {
-	clock-frequency = <25000000>;
-};
-
-&i2c1 {
-	pinctrl-0 = <&i2c1_pins_b>;
-	pinctrl-names = "default";
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-};
-
-&sdio1 {
-	status = "okay";
-	vmmc-supply = <&mmc_vcard>;
-	cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default", "opendrain";
-	pinctrl-0 = <&sdio_pins_a>;
-	pinctrl-1 = <&sdio_pins_od_a>;
-	bus-width = <4>;
-};
-
-&timers5 {
-	/* Override timer5 to act as clockevent */
-	compatible = "st,stm32-timer";
-	interrupts = <50>;
-	status = "okay";
-	/delete-property/#address-cells;
-	/delete-property/#size-cells;
-	/delete-property/clock-names;
-	/delete-node/pwm;
-	/delete-node/timer@4;
-};
-
-&usart1 {
-	pinctrl-0 = <&usart1_pins_b>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usbotg_fs {
-	dr_mode = "host";
-	pinctrl-0 = <&usbotg_fs_pins_a>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usbotg_hs {
-	dr_mode = "host";
-	phys = <&usbotg_hs_phy>;
-	phy-names = "usb2-phy";
-	pinctrl-0 = <&usbotg_hs_pins_b>;
-	pinctrl-names = "default";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/stm32f746-pinctrl.dtsi b/arch/arm/boot/dts/stm32f746-pinctrl.dtsi
deleted file mode 100644
index fcfd2ac7239b..000000000000
--- a/arch/arm/boot/dts/stm32f746-pinctrl.dtsi
+++ /dev/null
@@ -1,11 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
- * Author: Alexandre Torgue  <alexandre.torgue@st.com> for STMicroelectronics.
- */
-
-#include "stm32f7-pinctrl.dtsi"
-
-&pinctrl{
-	compatible = "st,stm32f746-pinctrl";
-};
diff --git a/arch/arm/boot/dts/stm32f769-pinctrl.dtsi b/arch/arm/boot/dts/stm32f769-pinctrl.dtsi
deleted file mode 100644
index 31005dd9929c..000000000000
--- a/arch/arm/boot/dts/stm32f769-pinctrl.dtsi
+++ /dev/null
@@ -1,11 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
- * Author: Alexandre Torgue  <alexandre.torgue@st.com> for STMicroelectronics.
- */
-
-#include "stm32f7-pinctrl.dtsi"
-
-&pinctrl{
-	compatible = "st,stm32f769-pinctrl";
-};
diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
deleted file mode 100644
index d2472cd8f1d0..000000000000
--- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@foss.st.com>
- */
-#include <dt-bindings/pinctrl/stm32-pinfunc.h>
-
-&pinctrl {
-	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
-		pins {
-			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
-				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
-				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
-				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
-				 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-disable;
-		};
-	};
-
-	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
-				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
-				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
-				 <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-disable;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
-			slew-rate = <1>;
-			drive-open-drain;
-			bias-disable;
-		};
-	};
-
-	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
-				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
-				 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
-				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
-				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
-				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
-		};
-	};
-
-	sdmmc1_clk_pins_a: sdmmc1-clk-0 {
-		pins {
-			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-disable;
-		};
-	};
-
-	sdmmc2_b4_pins_a: sdmmc2-b4-0 {
-		pins {
-			pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
-				 <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
-				 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
-				 <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2_D3 */
-				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-	};
-
-	sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
-				 <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
-				 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
-				 <STM32_PINMUX('B', 4, AF10)>; /* SDMMC2_D3 */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
-			slew-rate = <1>;
-			drive-open-drain;
-			bias-pull-up;
-		};
-	};
-
-	sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
-				 <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
-				 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
-				 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
-				 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
-				 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
-		};
-	};
-
-	sdmmc2_clk_pins_a: sdmmc2-clk-0 {
-		pins {
-			pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC2_CK */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-	};
-
-	uart4_pins_a: uart4-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */
-			bias-disable;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
deleted file mode 100644
index 3a921db23e9f..000000000000
--- a/arch/arm/boot/dts/stm32mp131.dtsi
+++ /dev/null
@@ -1,379 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
- */
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/stm32mp13-clks.h>
-#include <dt-bindings/reset/stm32mp13-resets.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>;
-		interrupt-parent = <&intc>;
-	};
-
-	firmware {
-		optee {
-			method = "smc";
-			compatible = "linaro,optee-tz";
-		};
-
-		scmi: scmi {
-			compatible = "linaro,scmi-optee";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			linaro,optee-channel-id = <0>;
-			shmem = <&scmi_shm>;
-
-			scmi_clk: protocol@14 {
-				reg = <0x14>;
-				#clock-cells = <1>;
-			};
-
-			scmi_reset: protocol@16 {
-				reg = <0x16>;
-				#reset-cells = <1>;
-			};
-		};
-	};
-
-	intc: interrupt-controller@a0021000 {
-		compatible = "arm,cortex-a7-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xa0021000 0x1000>,
-		      <0xa0022000 0x2000>;
-	};
-
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
-		interrupt-parent = <&intc>;
-		always-on;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&intc>;
-		ranges;
-
-		scmi_sram: sram@2ffff000 {
-			compatible = "mmio-sram";
-			reg = <0x2ffff000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x2ffff000 0x1000>;
-
-			scmi_shm: scmi-sram@0 {
-				compatible = "arm,scmi-shmem";
-				reg = <0 0x80>;
-			};
-		};
-
-		uart4: serial@40010000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x40010000 0x400>;
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc UART4_K>;
-			resets = <&rcc UART4_R>;
-			status = "disabled";
-		};
-
-		dma1: dma-controller@48000000 {
-			compatible = "st,stm32-dma";
-			reg = <0x48000000 0x400>;
-			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc DMA1>;
-			resets = <&rcc DMA1_R>;
-			#dma-cells = <4>;
-			st,mem2mem;
-			dma-requests = <8>;
-		};
-
-		dma2: dma-controller@48001000 {
-			compatible = "st,stm32-dma";
-			reg = <0x48001000 0x400>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc DMA2>;
-			resets = <&rcc DMA2_R>;
-			#dma-cells = <4>;
-			st,mem2mem;
-			dma-requests = <8>;
-		};
-
-		dmamux1: dma-router@48002000 {
-			compatible = "st,stm32h7-dmamux";
-			reg = <0x48002000 0x40>;
-			clocks = <&rcc DMAMUX1>;
-			resets = <&rcc DMAMUX1_R>;
-			#dma-cells = <3>;
-			dma-masters = <&dma1 &dma2>;
-			dma-requests = <128>;
-			dma-channels = <16>;
-		};
-
-		rcc: rcc@50000000 {
-			compatible = "st,stm32mp13-rcc", "syscon";
-			reg = <0x50000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			clock-names = "hse", "hsi", "csi", "lse", "lsi";
-			clocks = <&scmi_clk CK_SCMI_HSE>,
-				 <&scmi_clk CK_SCMI_HSI>,
-				 <&scmi_clk CK_SCMI_CSI>,
-				 <&scmi_clk CK_SCMI_LSE>,
-				 <&scmi_clk CK_SCMI_LSI>;
-		};
-
-		exti: interrupt-controller@5000d000 {
-			compatible = "st,stm32mp13-exti", "syscon";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x5000d000 0x400>;
-		};
-
-		syscfg: syscon@50020000 {
-			compatible = "st,stm32mp157-syscfg", "syscon";
-			reg = <0x50020000 0x400>;
-			clocks = <&rcc SYSCFG>;
-		};
-
-		mdma: dma-controller@58000000 {
-			compatible = "st,stm32h7-mdma";
-			reg = <0x58000000 0x1000>;
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc MDMA>;
-			#dma-cells = <5>;
-			dma-channels = <32>;
-			dma-requests = <48>;
-		};
-
-		sdmmc1: mmc@58005000 {
-			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x20253180>;
-			reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
-			clocks = <&rcc SDMMC1_K>;
-			clock-names = "apb_pclk";
-			resets = <&rcc SDMMC1_R>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			max-frequency = <130000000>;
-			status = "disabled";
-		};
-
-		sdmmc2: mmc@58007000 {
-			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x20253180>;
-			reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
-			clocks = <&rcc SDMMC2_K>;
-			clock-names = "apb_pclk";
-			resets = <&rcc SDMMC2_R>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			max-frequency = <130000000>;
-			status = "disabled";
-		};
-
-		iwdg2: watchdog@5a002000 {
-			compatible = "st,stm32mp1-iwdg";
-			reg = <0x5a002000 0x400>;
-			clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
-			clock-names = "pclk", "lsi";
-			status = "disabled";
-		};
-
-		rtc: rtc@5c004000 {
-			compatible = "st,stm32mp1-rtc";
-			reg = <0x5c004000 0x400>;
-			interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&scmi_clk CK_SCMI_RTCAPB>,
-				 <&scmi_clk CK_SCMI_RTC>;
-			clock-names = "pclk", "rtc_ck";
-			status = "disabled";
-		};
-
-		bsec: efuse@5c005000 {
-			compatible = "st,stm32mp15-bsec";
-			reg = <0x5c005000 0x400>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			part_number_otp: part_number_otp@4 {
-				reg = <0x4 0x2>;
-			};
-			ts_cal1: calib@5c {
-				reg = <0x5c 0x2>;
-			};
-			ts_cal2: calib@5e {
-				reg = <0x5e 0x2>;
-			};
-		};
-
-		/*
-		 * Break node order to solve dependency probe issue between
-		 * pinctrl and exti.
-		 */
-		pinctrl: pinctrl@50002000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stm32mp135-pinctrl";
-			ranges = <0 0x50002000 0x8400>;
-			interrupt-parent = <&exti>;
-			st,syscfg = <&exti 0x60 0xff>;
-			pins-are-numbered;
-
-			gpioa: gpio@50002000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x400>;
-				clocks = <&rcc GPIOA>;
-				st,bank-name = "GPIOA";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 0 16>;
-			};
-
-			gpiob: gpio@50003000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1000 0x400>;
-				clocks = <&rcc GPIOB>;
-				st,bank-name = "GPIOB";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 16 16>;
-			};
-
-			gpioc: gpio@50004000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2000 0x400>;
-				clocks = <&rcc GPIOC>;
-				st,bank-name = "GPIOC";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 32 16>;
-			};
-
-			gpiod: gpio@50005000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x3000 0x400>;
-				clocks = <&rcc GPIOD>;
-				st,bank-name = "GPIOD";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 48 16>;
-			};
-
-			gpioe: gpio@50006000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x4000 0x400>;
-				clocks = <&rcc GPIOE>;
-				st,bank-name = "GPIOE";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 64 16>;
-			};
-
-			gpiof: gpio@50007000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x5000 0x400>;
-				clocks = <&rcc GPIOF>;
-				st,bank-name = "GPIOF";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 80 16>;
-			};
-
-			gpiog: gpio@50008000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x6000 0x400>;
-				clocks = <&rcc GPIOG>;
-				st,bank-name = "GPIOG";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 96 16>;
-			};
-
-			gpioh: gpio@50009000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x7000 0x400>;
-				clocks = <&rcc GPIOH>;
-				st,bank-name = "GPIOH";
-				ngpios = <15>;
-				gpio-ranges = <&pinctrl 0 112 15>;
-			};
-
-			gpioi: gpio@5000a000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x8000 0x400>;
-				clocks = <&rcc GPIOI>;
-				st,bank-name = "GPIOI";
-				ngpios = <8>;
-				gpio-ranges = <&pinctrl 0 128 8>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stm32mp133.dtsi b/arch/arm/boot/dts/stm32mp133.dtsi
deleted file mode 100644
index 531c263c9f46..000000000000
--- a/arch/arm/boot/dts/stm32mp133.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
- */
-
-#include "stm32mp131.dtsi"
-
-/ {
-	soc {
-		m_can1: can@4400e000 {
-			compatible = "bosch,m_can";
-			reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
-			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "int0", "int1";
-			clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
-			clock-names = "hclk", "cclk";
-			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
-			status = "disabled";
-		};
-
-		m_can2: can@4400f000 {
-			compatible = "bosch,m_can";
-			reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
-			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "int0", "int1";
-			clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
-			clock-names = "hclk", "cclk";
-			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stm32mp135.dtsi b/arch/arm/boot/dts/stm32mp135.dtsi
deleted file mode 100644
index abf2acd37b4e..000000000000
--- a/arch/arm/boot/dts/stm32mp135.dtsi
+++ /dev/null
@@ -1,12 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
- */
-
-#include "stm32mp133.dtsi"
-
-/ {
-	soc {
-	};
-};
diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
deleted file mode 100644
index e6b8ffd332c7..000000000000
--- a/arch/arm/boot/dts/stm32mp135f-dk.dts
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "stm32mp135.dtsi"
-#include "stm32mp13xf.dtsi"
-#include "stm32mp13-pinctrl.dtsi"
-
-/ {
-	model = "STMicroelectronics STM32MP135F-DK Discovery Board";
-	compatible = "st,stm32mp135f-dk", "st,stm32mp135";
-
-	aliases {
-		serial0 = &uart4;
-	};
-
-	memory@c0000000 {
-		device_type = "memory";
-		reg = <0xc0000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		optee@dd000000 {
-			reg = <0xdd000000 0x3000000>;
-			no-map;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-pa13 {
-			label = "User-PA13";
-			linux,code = <BTN_1>;
-			gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-blue {
-			function = LED_FUNCTION_HEARTBEAT;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	vdd_sd: vdd-sd {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_sd";
-		regulator-min-microvolt = <2900000>;
-		regulator-max-microvolt = <2900000>;
-		regulator-always-on;
-	};
-};
-
-&iwdg2 {
-	timeout-sec = <32>;
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sdmmc1 {
-	pinctrl-names = "default", "opendrain", "sleep";
-	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
-	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
-	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	broken-cd;
-	disable-wp;
-	st,neg-edge;
-	bus-width = <4>;
-	vmmc-supply = <&vdd_sd>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins_a>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/stm32mp13xc.dtsi b/arch/arm/boot/dts/stm32mp13xc.dtsi
deleted file mode 100644
index 4d00e7592882..000000000000
--- a/arch/arm/boot/dts/stm32mp13xc.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
- */
-
-/ {
-	soc {
-		cryp: crypto@54002000 {
-			compatible = "st,stm32mp1-cryp";
-			reg = <0x54002000 0x400>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CRYP1>;
-			resets = <&rcc CRYP1_R>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stm32mp13xf.dtsi b/arch/arm/boot/dts/stm32mp13xf.dtsi
deleted file mode 100644
index 4d00e7592882..000000000000
--- a/arch/arm/boot/dts/stm32mp13xf.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
- */
-
-/ {
-	soc {
-		cryp: crypto@54002000 {
-			compatible = "st,stm32mp1-cryp";
-			reg = <0x54002000 0x400>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CRYP1>;
-			resets = <&rcc CRYP1_R>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
deleted file mode 100644
index 2cc9341d43d2..000000000000
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ /dev/null
@@ -1,2450 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
- * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
- */
-#include <dt-bindings/pinctrl/stm32-pinfunc.h>
-
-&pinctrl {
-	adc1_in6_pins_a: adc1-in6-0 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 12, ANALOG)>;
-		};
-	};
-
-	adc12_ain_pins_a: adc12-ain-0 {
-		pins {
-			pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */
-				 <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
-				 <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */
-				 <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */
-		};
-	};
-
-	adc12_ain_pins_b: adc12-ain-1 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
-				 <STM32_PINMUX('F', 13, ANALOG)>; /* ADC2 in2 */
-		};
-	};
-
-	adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
-				 <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */
-		};
-	};
-
-	cec_pins_a: cec-0 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 15, AF4)>;
-			bias-disable;
-			drive-open-drain;
-			slew-rate = <0>;
-		};
-	};
-
-	cec_sleep_pins_a: cec-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
-		};
-	};
-
-	cec_pins_b: cec-1 {
-		pins {
-			pinmux = <STM32_PINMUX('B', 6, AF5)>;
-			bias-disable;
-			drive-open-drain;
-			slew-rate = <0>;
-		};
-	};
-
-	cec_sleep_pins_b: cec-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */
-		};
-	};
-
-	dac_ch1_pins_a: dac-ch1-0 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
-		};
-	};
-
-	dac_ch2_pins_a: dac-ch2-0 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
-		};
-	};
-
-	dcmi_pins_a: dcmi-0 {
-		pins {
-			pinmux = <STM32_PINMUX('H', 8,  AF13)>,/* DCMI_HSYNC */
-				 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
-				 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
-				 <STM32_PINMUX('H', 9,  AF13)>,/* DCMI_D0 */
-				 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
-				 <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
-				 <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */
-				 <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
-				 <STM32_PINMUX('I', 4,  AF13)>,/* DCMI_D5 */
-				 <STM32_PINMUX('B', 8,  AF13)>,/* DCMI_D6 */
-				 <STM32_PINMUX('E', 6,  AF13)>,/* DCMI_D7 */
-				 <STM32_PINMUX('I', 1,  AF13)>,/* DCMI_D8 */
-				 <STM32_PINMUX('H', 7,  AF13)>,/* DCMI_D9 */
-				 <STM32_PINMUX('I', 3,  AF13)>,/* DCMI_D10 */
-				 <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */
-			bias-disable;
-		};
-	};
-
-	dcmi_sleep_pins_a: dcmi-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('H', 8,  ANALOG)>,/* DCMI_HSYNC */
-				 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
-				 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
-				 <STM32_PINMUX('H', 9,  ANALOG)>,/* DCMI_D0 */
-				 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
-				 <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
-				 <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */
-				 <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
-				 <STM32_PINMUX('I', 4,  ANALOG)>,/* DCMI_D5 */
-				 <STM32_PINMUX('B', 8,  ANALOG)>,/* DCMI_D6 */
-				 <STM32_PINMUX('E', 6,  ANALOG)>,/* DCMI_D7 */
-				 <STM32_PINMUX('I', 1,  ANALOG)>,/* DCMI_D8 */
-				 <STM32_PINMUX('H', 7,  ANALOG)>,/* DCMI_D9 */
-				 <STM32_PINMUX('I', 3,  ANALOG)>,/* DCMI_D10 */
-				 <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */
-		};
-	};
-
-	dcmi_pins_b: dcmi-1 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 4,  AF13)>,/* DCMI_HSYNC */
-				 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
-				 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
-				 <STM32_PINMUX('C', 6,  AF13)>,/* DCMI_D0 */
-				 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
-				 <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
-				 <STM32_PINMUX('E', 1,  AF13)>,/* DCMI_D3 */
-				 <STM32_PINMUX('E', 11, AF13)>,/* DCMI_D4 */
-				 <STM32_PINMUX('D', 3,  AF13)>,/* DCMI_D5 */
-				 <STM32_PINMUX('E', 13, AF13)>,/* DCMI_D6 */
-				 <STM32_PINMUX('B', 9,  AF13)>;/* DCMI_D7 */
-			bias-disable;
-		};
-	};
-
-	dcmi_sleep_pins_b: dcmi-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 4,  ANALOG)>,/* DCMI_HSYNC */
-				 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
-				 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
-				 <STM32_PINMUX('C', 6,  ANALOG)>,/* DCMI_D0 */
-				 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
-				 <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
-				 <STM32_PINMUX('E', 1,  ANALOG)>,/* DCMI_D3 */
-				 <STM32_PINMUX('E', 11, ANALOG)>,/* DCMI_D4 */
-				 <STM32_PINMUX('D', 3,  ANALOG)>,/* DCMI_D5 */
-				 <STM32_PINMUX('E', 13, ANALOG)>,/* DCMI_D6 */
-				 <STM32_PINMUX('B', 9,  ANALOG)>;/* DCMI_D7 */
-		};
-	};
-
-	dcmi_pins_c: dcmi-2 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 4,  AF13)>,/* DCMI_HSYNC */
-				 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
-				 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
-				 <STM32_PINMUX('A', 9,  AF13)>,/* DCMI_D0 */
-				 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
-				 <STM32_PINMUX('E', 0, AF13)>,/* DCMI_D2 */
-				 <STM32_PINMUX('E', 1, AF13)>,/* DCMI_D3 */
-				 <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
-				 <STM32_PINMUX('I', 4,  AF13)>,/* DCMI_D5 */
-				 <STM32_PINMUX('I', 6,  AF13)>,/* DCMI_D6 */
-				 <STM32_PINMUX('E', 6,  AF13)>,/* DCMI_D7 */
-				 <STM32_PINMUX('I', 1,  AF13)>,/* DCMI_D8 */
-				 <STM32_PINMUX('H', 7,  AF13)>;/* DCMI_D9 */
-			bias-pull-up;
-		};
-	};
-
-	dcmi_sleep_pins_c: dcmi-sleep-2 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 4,  ANALOG)>,/* DCMI_HSYNC */
-				 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
-				 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
-				 <STM32_PINMUX('A', 9,  ANALOG)>,/* DCMI_D0 */
-				 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
-				 <STM32_PINMUX('E', 0, ANALOG)>,/* DCMI_D2 */
-				 <STM32_PINMUX('E', 1, ANALOG)>,/* DCMI_D3 */
-				 <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
-				 <STM32_PINMUX('I', 4,  ANALOG)>,/* DCMI_D5 */
-				 <STM32_PINMUX('I', 6,  ANALOG)>,/* DCMI_D6 */
-				 <STM32_PINMUX('E', 6,  ANALOG)>,/* DCMI_D7 */
-				 <STM32_PINMUX('I', 1,  ANALOG)>,/* DCMI_D8 */
-				 <STM32_PINMUX('H', 7,  ANALOG)>;/* DCMI_D9 */
-		};
-	};
-
-	ethernet0_rgmii_pins_a: rgmii-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
-				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
-				 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
-				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
-				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
-				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
-				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
-				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <2>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins3 {
-			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
-				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
-				 <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
-				 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
-				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
-				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
-			bias-disable;
-		};
-	};
-
-	ethernet0_rgmii_sleep_pins_a: rgmii-sleep-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
-				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
-				 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
-				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
-				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
-				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
-				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
-				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
-				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
-				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
-				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
-				 <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
-				 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
-				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
-				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
-		};
-	};
-
-	ethernet0_rgmii_pins_b: rgmii-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
-				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
-				 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
-				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
-				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
-				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
-				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
-				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <2>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins3 {
-			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
-				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
-				 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
-				 <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
-				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
-				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
-			bias-disable;
-		};
-	};
-
-	ethernet0_rgmii_sleep_pins_b: rgmii-sleep-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
-				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
-				 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
-				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
-				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
-				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
-				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
-				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
-				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
-				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
-				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
-				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
-				 <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */
-				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
-				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
-		 };
-	};
-
-	ethernet0_rgmii_pins_c: rgmii-2 {
-		pins1 {
-			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
-				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
-				 <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */
-				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
-				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
-				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
-				 <STM32_PINMUX('G', 11, AF11)>, /* ETH_RGMII_TX_CTL */
-				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <2>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins3 {
-			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
-				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
-				 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
-				 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
-				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
-				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
-			bias-disable;
-		};
-	};
-
-	ethernet0_rgmii_sleep_pins_c: rgmii-sleep-2 {
-		pins1 {
-			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
-				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
-				 <STM32_PINMUX('B', 12, ANALOG)>, /* ETH_RGMII_TXD0 */
-				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
-				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
-				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
-				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
-				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
-				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
-				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
-				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
-				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
-				 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
-				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
-				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
-		};
-	};
-
-	ethernet0_rmii_pins_a: rmii-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
-				 <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
-				 <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
-				 <STM32_PINMUX('A', 1, AF0)>,   /* ETH1_RMII_REF_CLK */
-				 <STM32_PINMUX('A', 2, AF11)>,  /* ETH1_MDIO */
-				 <STM32_PINMUX('C', 1, AF11)>;  /* ETH1_MDC */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <2>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
-				 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
-				 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
-			bias-disable;
-		};
-	};
-
-	ethernet0_rmii_sleep_pins_a: rmii-sleep-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */
-				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */
-				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
-				 <STM32_PINMUX('A', 2, ANALOG)>,  /* ETH1_MDIO */
-				 <STM32_PINMUX('C', 1, ANALOG)>,  /* ETH1_MDC */
-				 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
-				 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
-				 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
-				 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
-		};
-	};
-
-	ethernet0_rmii_pins_b: rmii-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 5, AF0)>, /* ETH1_CLK */
-				<STM32_PINMUX('C', 1, AF11)>, /* ETH1_MDC */
-				<STM32_PINMUX('G', 13, AF11)>, /* ETH1_TXD0 */
-				<STM32_PINMUX('G', 14, AF11)>; /* ETH1_TXD1 */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH1_MDIO */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins3 {
-			pinmux = <STM32_PINMUX('A', 7, AF11)>, /* ETH1_CRS_DV */
-				<STM32_PINMUX('C', 4, AF11)>, /* ETH1_RXD0 */
-				<STM32_PINMUX('C', 5, AF11)>; /* ETH1_RXD1 */
-			bias-disable;
-		};
-		pins4 {
-			pinmux = <STM32_PINMUX('B', 11, AF11)>; /* ETH1_TX_EN */
-		};
-	};
-
-	ethernet0_rmii_sleep_pins_b: rmii-sleep-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */
-				<STM32_PINMUX('A', 7, ANALOG)>, /* ETH1_CRS_DV */
-				<STM32_PINMUX('B', 5, ANALOG)>, /* ETH1_CLK */
-				<STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_TX_EN */
-				<STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */
-				<STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RXD0 */
-				<STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RXD1 */
-				<STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_TXD0 */
-				<STM32_PINMUX('G', 14, ANALOG)>; /* ETH1_TXD1 */
-		};
-	};
-
-	ethernet0_rmii_pins_c: rmii-2 {
-		pins1 {
-			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
-				 <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
-				 <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
-				 <STM32_PINMUX('A', 1, AF11)>,  /* ETH1_RMII_REF_CLK */
-				 <STM32_PINMUX('A', 2, AF11)>,  /* ETH1_MDIO */
-				 <STM32_PINMUX('C', 1, AF11)>;  /* ETH1_MDC */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <2>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
-				 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
-				 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
-			bias-disable;
-		};
-	};
-
-	ethernet0_rmii_sleep_pins_c: rmii-sleep-2 {
-		pins1 {
-			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */
-				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */
-				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
-				 <STM32_PINMUX('A', 2, ANALOG)>,  /* ETH1_MDIO */
-				 <STM32_PINMUX('C', 1, ANALOG)>,  /* ETH1_MDC */
-				 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
-				 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
-				 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
-				 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
-		};
-	};
-
-	fmc_pins_a: fmc-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
-				 <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
-				 <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
-				 <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
-				 <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
-				 <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
-				 <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
-				 <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
-				 <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
-				 <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
-				 <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
-				 <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
-				 <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
-			bias-pull-up;
-		};
-	};
-
-	fmc_sleep_pins_a: fmc-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
-				 <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
-				 <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */
-				 <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */
-				 <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
-				 <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
-				 <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
-				 <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
-				 <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
-				 <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
-				 <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
-				 <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
-				 <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */
-				 <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */
-		};
-	};
-
-	fmc_pins_b: fmc-1 {
-		pins {
-			pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
-				 <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
-				 <STM32_PINMUX('B', 7, AF12)>, /* FMC_NL */
-				 <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
-				 <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
-				 <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
-				 <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
-				 <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
-				 <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
-				 <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
-				 <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
-				 <STM32_PINMUX('E', 11, AF12)>, /* FMC_D8 */
-				 <STM32_PINMUX('E', 12, AF12)>, /* FMC_D9 */
-				 <STM32_PINMUX('E', 13, AF12)>, /* FMC_D10 */
-				 <STM32_PINMUX('E', 14, AF12)>, /* FMC_D11 */
-				 <STM32_PINMUX('E', 15, AF12)>, /* FMC_D12 */
-				 <STM32_PINMUX('D', 8, AF12)>, /* FMC_D13 */
-				 <STM32_PINMUX('D', 9, AF12)>, /* FMC_D14 */
-				 <STM32_PINMUX('D', 10, AF12)>, /* FMC_D15 */
-				 <STM32_PINMUX('G', 9, AF12)>, /* FMC_NE2_FMC_NCE */
-				 <STM32_PINMUX('G', 12, AF12)>; /* FMC_NE4 */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <3>;
-		};
-	};
-
-	fmc_sleep_pins_b: fmc-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
-				 <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
-				 <STM32_PINMUX('B', 7, ANALOG)>, /* FMC_NL */
-				 <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
-				 <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
-				 <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
-				 <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
-				 <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
-				 <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
-				 <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
-				 <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
-				 <STM32_PINMUX('E', 11, ANALOG)>, /* FMC_D8 */
-				 <STM32_PINMUX('E', 12, ANALOG)>, /* FMC_D9 */
-				 <STM32_PINMUX('E', 13, ANALOG)>, /* FMC_D10 */
-				 <STM32_PINMUX('E', 14, ANALOG)>, /* FMC_D11 */
-				 <STM32_PINMUX('E', 15, ANALOG)>, /* FMC_D12 */
-				 <STM32_PINMUX('D', 8, ANALOG)>, /* FMC_D13 */
-				 <STM32_PINMUX('D', 9, ANALOG)>, /* FMC_D14 */
-				 <STM32_PINMUX('D', 10, ANALOG)>, /* FMC_D15 */
-				 <STM32_PINMUX('G', 9, ANALOG)>, /* FMC_NE2_FMC_NCE */
-				 <STM32_PINMUX('G', 12, ANALOG)>; /* FMC_NE4 */
-		};
-	};
-
-	i2c1_pins_a: i2c1-0 {
-		pins {
-			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
-				 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
-			bias-disable;
-			drive-open-drain;
-			slew-rate = <0>;
-		};
-	};
-
-	i2c1_sleep_pins_a: i2c1-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
-				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
-		};
-	};
-
-	i2c1_pins_b: i2c1-1 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
-				 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
-			bias-disable;
-			drive-open-drain;
-			slew-rate = <0>;
-		};
-	};
-
-	i2c1_sleep_pins_b: i2c1-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
-				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
-		};
-	};
-
-	i2c2_pins_a: i2c2-0 {
-		pins {
-			pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
-				 <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
-			bias-disable;
-			drive-open-drain;
-			slew-rate = <0>;
-		};
-	};
-
-	i2c2_sleep_pins_a: i2c2-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */
-				 <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
-		};
-	};
-
-	i2c2_pins_b1: i2c2-1 {
-		pins {
-			pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
-			bias-disable;
-			drive-open-drain;
-			slew-rate = <0>;
-		};
-	};
-
-	i2c2_sleep_pins_b1: i2c2-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
-		};
-	};
-
-	i2c2_pins_c: i2c2-2 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 1, AF4)>, /* I2C2_SCL */
-				 <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
-			bias-disable;
-			drive-open-drain;
-			slew-rate = <0>;
-		};
-	};
-
-	i2c2_pins_sleep_c: i2c2-sleep-2 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 1, ANALOG)>, /* I2C2_SCL */
-				 <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
-		};
-	};
-
-	i2c5_pins_a: i2c5-0 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
-				 <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */
-			bias-disable;
-			drive-open-drain;
-			slew-rate = <0>;
-		};
-	};
-
-	i2c5_sleep_pins_a: i2c5-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */
-				 <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */
-
-		};
-	};
-
-	i2c5_pins_b: i2c5-1 {
-		pins {
-			pinmux = <STM32_PINMUX('D', 0, AF4)>, /* I2C5_SCL */
-				 <STM32_PINMUX('D', 1, AF4)>; /* I2C5_SDA */
-			bias-disable;
-			drive-open-drain;
-			slew-rate = <0>;
-		};
-	};
-
-	i2c5_sleep_pins_b: i2c5-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('D', 0, ANALOG)>, /* I2C5_SCL */
-				 <STM32_PINMUX('D', 1, ANALOG)>; /* I2C5_SDA */
-		};
-	};
-
-	i2s2_pins_a: i2s2-0 {
-		pins {
-			pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */
-				 <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */
-				 <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-disable;
-		};
-	};
-
-	i2s2_sleep_pins_a: i2s2-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */
-				 <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */
-				 <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */
-		};
-	};
-
-	ltdc_pins_a: ltdc-0 {
-		pins {
-			pinmux = <STM32_PINMUX('G',  7, AF14)>, /* LCD_CLK */
-				 <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
-				 <STM32_PINMUX('I',  9, AF14)>, /* LCD_VSYNC */
-				 <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */
-				 <STM32_PINMUX('H',  2, AF14)>, /* LCD_R0 */
-				 <STM32_PINMUX('H',  3, AF14)>, /* LCD_R1 */
-				 <STM32_PINMUX('H',  8, AF14)>, /* LCD_R2 */
-				 <STM32_PINMUX('H',  9, AF14)>, /* LCD_R3 */
-				 <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */
-				 <STM32_PINMUX('C',  0, AF14)>, /* LCD_R5 */
-				 <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
-				 <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
-				 <STM32_PINMUX('E',  5, AF14)>, /* LCD_G0 */
-				 <STM32_PINMUX('E',  6, AF14)>, /* LCD_G1 */
-				 <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
-				 <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */
-				 <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
-				 <STM32_PINMUX('I',  0, AF14)>, /* LCD_G5 */
-				 <STM32_PINMUX('I',  1, AF14)>, /* LCD_G6 */
-				 <STM32_PINMUX('I',  2, AF14)>, /* LCD_G7 */
-				 <STM32_PINMUX('D',  9, AF14)>, /* LCD_B0 */
-				 <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
-				 <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
-				 <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
-				 <STM32_PINMUX('I',  4, AF14)>, /* LCD_B4 */
-				 <STM32_PINMUX('A',  3, AF14)>, /* LCD_B5 */
-				 <STM32_PINMUX('B',  8, AF14)>, /* LCD_B6 */
-				 <STM32_PINMUX('D',  8, AF14)>; /* LCD_B7 */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-	};
-
-	ltdc_sleep_pins_a: ltdc-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('G',  7, ANALOG)>, /* LCD_CLK */
-				 <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
-				 <STM32_PINMUX('I',  9, ANALOG)>, /* LCD_VSYNC */
-				 <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */
-				 <STM32_PINMUX('H',  2, ANALOG)>, /* LCD_R0 */
-				 <STM32_PINMUX('H',  3, ANALOG)>, /* LCD_R1 */
-				 <STM32_PINMUX('H',  8, ANALOG)>, /* LCD_R2 */
-				 <STM32_PINMUX('H',  9, ANALOG)>, /* LCD_R3 */
-				 <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */
-				 <STM32_PINMUX('C',  0, ANALOG)>, /* LCD_R5 */
-				 <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
-				 <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
-				 <STM32_PINMUX('E',  5, ANALOG)>, /* LCD_G0 */
-				 <STM32_PINMUX('E',  6, ANALOG)>, /* LCD_G1 */
-				 <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
-				 <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */
-				 <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
-				 <STM32_PINMUX('I',  0, ANALOG)>, /* LCD_G5 */
-				 <STM32_PINMUX('I',  1, ANALOG)>, /* LCD_G6 */
-				 <STM32_PINMUX('I',  2, ANALOG)>, /* LCD_G7 */
-				 <STM32_PINMUX('D',  9, ANALOG)>, /* LCD_B0 */
-				 <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
-				 <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
-				 <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
-				 <STM32_PINMUX('I',  4, ANALOG)>, /* LCD_B4 */
-				 <STM32_PINMUX('A',  3, ANALOG)>, /* LCD_B5 */
-				 <STM32_PINMUX('B',  8, ANALOG)>, /* LCD_B6 */
-				 <STM32_PINMUX('D',  8, ANALOG)>; /* LCD_B7 */
-		};
-	};
-
-	ltdc_pins_b: ltdc-1 {
-		pins {
-			pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
-				 <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
-				 <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
-				 <STM32_PINMUX('K',  7, AF14)>, /* LCD_DE */
-				 <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
-				 <STM32_PINMUX('J',  0, AF14)>, /* LCD_R1 */
-				 <STM32_PINMUX('J',  1, AF14)>, /* LCD_R2 */
-				 <STM32_PINMUX('J',  2, AF14)>, /* LCD_R3 */
-				 <STM32_PINMUX('J',  3, AF14)>, /* LCD_R4 */
-				 <STM32_PINMUX('J',  4, AF14)>, /* LCD_R5 */
-				 <STM32_PINMUX('J',  5, AF14)>, /* LCD_R6 */
-				 <STM32_PINMUX('J',  6, AF14)>, /* LCD_R7 */
-				 <STM32_PINMUX('J',  7, AF14)>, /* LCD_G0 */
-				 <STM32_PINMUX('J',  8, AF14)>, /* LCD_G1 */
-				 <STM32_PINMUX('J',  9, AF14)>, /* LCD_G2 */
-				 <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
-				 <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
-				 <STM32_PINMUX('K',  0, AF14)>, /* LCD_G5 */
-				 <STM32_PINMUX('K',  1, AF14)>, /* LCD_G6 */
-				 <STM32_PINMUX('K',  2, AF14)>, /* LCD_G7 */
-				 <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
-				 <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
-				 <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
-				 <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */
-				 <STM32_PINMUX('K',  3, AF14)>, /* LCD_B4 */
-				 <STM32_PINMUX('K',  4, AF14)>, /* LCD_B5 */
-				 <STM32_PINMUX('K',  5, AF14)>, /* LCD_B6 */
-				 <STM32_PINMUX('K',  6, AF14)>; /* LCD_B7 */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-	};
-
-	ltdc_sleep_pins_b: ltdc-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */
-				 <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */
-				 <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */
-				 <STM32_PINMUX('K',  7, ANALOG)>, /* LCD_DE */
-				 <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */
-				 <STM32_PINMUX('J',  0, ANALOG)>, /* LCD_R1 */
-				 <STM32_PINMUX('J',  1, ANALOG)>, /* LCD_R2 */
-				 <STM32_PINMUX('J',  2, ANALOG)>, /* LCD_R3 */
-				 <STM32_PINMUX('J',  3, ANALOG)>, /* LCD_R4 */
-				 <STM32_PINMUX('J',  4, ANALOG)>, /* LCD_R5 */
-				 <STM32_PINMUX('J',  5, ANALOG)>, /* LCD_R6 */
-				 <STM32_PINMUX('J',  6, ANALOG)>, /* LCD_R7 */
-				 <STM32_PINMUX('J',  7, ANALOG)>, /* LCD_G0 */
-				 <STM32_PINMUX('J',  8, ANALOG)>, /* LCD_G1 */
-				 <STM32_PINMUX('J',  9, ANALOG)>, /* LCD_G2 */
-				 <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */
-				 <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */
-				 <STM32_PINMUX('K',  0, ANALOG)>, /* LCD_G5 */
-				 <STM32_PINMUX('K',  1, ANALOG)>, /* LCD_G6 */
-				 <STM32_PINMUX('K',  2, ANALOG)>, /* LCD_G7 */
-				 <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */
-				 <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */
-				 <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */
-				 <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */
-				 <STM32_PINMUX('K',  3, ANALOG)>, /* LCD_B4 */
-				 <STM32_PINMUX('K',  4, ANALOG)>, /* LCD_B5 */
-				 <STM32_PINMUX('K',  5, ANALOG)>, /* LCD_B6 */
-				 <STM32_PINMUX('K',  6, ANALOG)>; /* LCD_B7 */
-		};
-	};
-
-	ltdc_pins_c: ltdc-2 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B',  1, AF9)>,  /* LTDC_R6 */
-				 <STM32_PINMUX('B',  9, AF14)>, /* LTDC_B7 */
-				 <STM32_PINMUX('C',  0, AF14)>, /* LTDC_R5 */
-				 <STM32_PINMUX('D',  3, AF14)>, /* LTDC_G7 */
-				 <STM32_PINMUX('D',  6, AF14)>, /* LTDC_B2 */
-				 <STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */
-				 <STM32_PINMUX('E', 11, AF14)>, /* LTDC_G3 */
-				 <STM32_PINMUX('E', 12, AF14)>, /* LTDC_B4 */
-				 <STM32_PINMUX('E', 13, AF14)>, /* LTDC_DE */
-				 <STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */
-				 <STM32_PINMUX('H',  4, AF9)>,  /* LTDC_G5 */
-				 <STM32_PINMUX('H',  8, AF14)>, /* LTDC_R2 */
-				 <STM32_PINMUX('H',  9, AF14)>, /* LTDC_R3 */
-				 <STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */
-				 <STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */
-				 <STM32_PINMUX('H', 15, AF14)>, /* LTDC_G4 */
-				 <STM32_PINMUX('I',  1, AF14)>, /* LTDC_G6 */
-				 <STM32_PINMUX('I',  5, AF14)>, /* LTDC_B5 */
-				 <STM32_PINMUX('I',  6, AF14)>, /* LTDC_B6 */
-				 <STM32_PINMUX('I',  9, AF14)>, /* LTDC_VSYNC */
-				 <STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 14, AF14)>; /* LTDC_CLK */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-	};
-
-	ltdc_sleep_pins_c: ltdc-sleep-2 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 1, ANALOG)>,  /* LTDC_R6 */
-				 <STM32_PINMUX('B', 9, ANALOG)>, /* LTDC_B7 */
-				 <STM32_PINMUX('C', 0, ANALOG)>, /* LTDC_R5 */
-				 <STM32_PINMUX('D', 3, ANALOG)>, /* LTDC_G7 */
-				 <STM32_PINMUX('D', 6, ANALOG)>, /* LTDC_B2 */
-				 <STM32_PINMUX('D', 10, ANALOG)>, /* LTDC_B3 */
-				 <STM32_PINMUX('E', 11, ANALOG)>, /* LTDC_G3 */
-				 <STM32_PINMUX('E', 12, ANALOG)>, /* LTDC_B4 */
-				 <STM32_PINMUX('E', 13, ANALOG)>, /* LTDC_DE */
-				 <STM32_PINMUX('E', 15, ANALOG)>, /* LTDC_R7 */
-				 <STM32_PINMUX('H', 4, ANALOG)>,  /* LTDC_G5 */
-				 <STM32_PINMUX('H', 8, ANALOG)>, /* LTDC_R2 */
-				 <STM32_PINMUX('H', 9, ANALOG)>, /* LTDC_R3 */
-				 <STM32_PINMUX('H', 10, ANALOG)>, /* LTDC_R4 */
-				 <STM32_PINMUX('H', 13, ANALOG)>, /* LTDC_G2 */
-				 <STM32_PINMUX('H', 15, ANALOG)>, /* LTDC_G4 */
-				 <STM32_PINMUX('I', 1, ANALOG)>, /* LTDC_G6 */
-				 <STM32_PINMUX('I', 5, ANALOG)>, /* LTDC_B5 */
-				 <STM32_PINMUX('I', 6, ANALOG)>, /* LTDC_B6 */
-				 <STM32_PINMUX('I', 9, ANALOG)>, /* LTDC_VSYNC */
-				 <STM32_PINMUX('I', 10, ANALOG)>, /* LTDC_HSYNC */
-				 <STM32_PINMUX('E', 14, ANALOG)>; /* LTDC_CLK */
-		};
-	};
-
-	ltdc_pins_d: ltdc-3 {
-		pins1 {
-			pinmux = <STM32_PINMUX('G',  7, AF14)>; /* LCD_CLK */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <3>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
-				 <STM32_PINMUX('I',  9, AF14)>, /* LCD_VSYNC */
-				 <STM32_PINMUX('E', 13, AF14)>, /* LCD_DE */
-				 <STM32_PINMUX('G', 13, AF14)>, /* LCD_R0 */
-				 <STM32_PINMUX('H',  3, AF14)>, /* LCD_R1 */
-				 <STM32_PINMUX('H',  8, AF14)>, /* LCD_R2 */
-				 <STM32_PINMUX('H',  9, AF14)>, /* LCD_R3 */
-				 <STM32_PINMUX('A',  5, AF14)>, /* LCD_R4 */
-				 <STM32_PINMUX('H', 11, AF14)>, /* LCD_R5 */
-				 <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
-				 <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
-				 <STM32_PINMUX('E',  5, AF14)>, /* LCD_G0 */
-				 <STM32_PINMUX('B',  0, AF14)>, /* LCD_G1 */
-				 <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
-				 <STM32_PINMUX('E', 11, AF14)>, /* LCD_G3 */
-				 <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
-				 <STM32_PINMUX('H',  4,  AF9)>, /* LCD_G5 */
-				 <STM32_PINMUX('I', 11,  AF9)>, /* LCD_G6 */
-				 <STM32_PINMUX('G',  8, AF14)>, /* LCD_G7 */
-				 <STM32_PINMUX('D',  9, AF14)>, /* LCD_B0 */
-				 <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
-				 <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
-				 <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
-				 <STM32_PINMUX('E', 12, AF14)>, /* LCD_B4 */
-				 <STM32_PINMUX('A',  3, AF14)>, /* LCD_B5 */
-				 <STM32_PINMUX('B',  8, AF14)>, /* LCD_B6 */
-				 <STM32_PINMUX('I',  7, AF14)>; /* LCD_B7 */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <2>;
-		};
-	};
-
-	ltdc_sleep_pins_d: ltdc-sleep-3 {
-		pins {
-			pinmux = <STM32_PINMUX('G',  7, ANALOG)>, /* LCD_CLK */
-				 <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
-				 <STM32_PINMUX('I',  9, ANALOG)>, /* LCD_VSYNC */
-				 <STM32_PINMUX('E', 13, ANALOG)>, /* LCD_DE */
-				 <STM32_PINMUX('G', 13, ANALOG)>, /* LCD_R0 */
-				 <STM32_PINMUX('H',  3, ANALOG)>, /* LCD_R1 */
-				 <STM32_PINMUX('H',  8, ANALOG)>, /* LCD_R2 */
-				 <STM32_PINMUX('H',  9, ANALOG)>, /* LCD_R3 */
-				 <STM32_PINMUX('A',  5, ANALOG)>, /* LCD_R4 */
-				 <STM32_PINMUX('H', 11, ANALOG)>, /* LCD_R5 */
-				 <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
-				 <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
-				 <STM32_PINMUX('E',  5, ANALOG)>, /* LCD_G0 */
-				 <STM32_PINMUX('B',  0, ANALOG)>, /* LCD_G1 */
-				 <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
-				 <STM32_PINMUX('E', 11, ANALOG)>, /* LCD_G3 */
-				 <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
-				 <STM32_PINMUX('H',  4, ANALOG)>, /* LCD_G5 */
-				 <STM32_PINMUX('I', 11, ANALOG)>, /* LCD_G6 */
-				 <STM32_PINMUX('G',  8, ANALOG)>, /* LCD_G7 */
-				 <STM32_PINMUX('D',  9, ANALOG)>, /* LCD_B0 */
-				 <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
-				 <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
-				 <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
-				 <STM32_PINMUX('E', 12, ANALOG)>, /* LCD_B4 */
-				 <STM32_PINMUX('A',  3, ANALOG)>, /* LCD_B5 */
-				 <STM32_PINMUX('B',  8, ANALOG)>, /* LCD_B6 */
-				 <STM32_PINMUX('I',  7, ANALOG)>; /* LCD_B7 */
-		};
-	};
-
-	mco1_pins_a: mco1-0 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 13, AF2)>; /* MCO1 */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-	};
-
-	mco1_sleep_pins_a: mco1-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 13, ANALOG)>; /* MCO1 */
-		};
-	};
-
-	mco2_pins_a: mco2-0 {
-		pins {
-			pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <2>;
-		};
-	};
-
-	mco2_sleep_pins_a: mco2-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('G', 2, ANALOG)>; /* MCO2 */
-		};
-	};
-
-	m_can1_pins_a: m-can1-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-disable;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */
-			bias-disable;
-		};
-	};
-
-	m_can1_sleep_pins_a: m_can1-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
-				 <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */
-		};
-	};
-
-	m_can1_pins_b: m-can1-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-disable;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */
-			bias-disable;
-		};
-	};
-
-	m_can1_sleep_pins_b: m_can1-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 12, ANALOG)>, /* CAN1_TX */
-				 <STM32_PINMUX('A', 11, ANALOG)>; /* CAN1_RX */
-		};
-	};
-
-	m_can1_pins_c: m-can1-2 {
-		pins1 {
-			pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-disable;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */
-			bias-disable;
-		};
-	};
-
-	m_can1_sleep_pins_c: m_can1-sleep-2 {
-		pins {
-			pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
-				 <STM32_PINMUX('H', 14, ANALOG)>; /* CAN1_RX */
-		};
-	};
-
-	m_can2_pins_a: m-can2-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-disable;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */
-			bias-disable;
-		};
-	};
-
-	m_can2_sleep_pins_a: m_can2-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('B', 13, ANALOG)>, /* CAN2_TX */
-				 <STM32_PINMUX('B', 5, ANALOG)>; /* CAN2_RX */
-		};
-	};
-
-	pwm1_pins_a: pwm1-0 {
-		pins {
-			pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */
-				 <STM32_PINMUX('E', 11, AF1)>, /* TIM1_CH2 */
-				 <STM32_PINMUX('E', 14, AF1)>; /* TIM1_CH4 */
-			bias-pull-down;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-	};
-
-	pwm1_sleep_pins_a: pwm1-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('E', 9, ANALOG)>, /* TIM1_CH1 */
-				 <STM32_PINMUX('E', 11, ANALOG)>, /* TIM1_CH2 */
-				 <STM32_PINMUX('E', 14, ANALOG)>; /* TIM1_CH4 */
-		};
-	};
-
-	pwm1_pins_b: pwm1-1 {
-		pins {
-			pinmux = <STM32_PINMUX('E', 9, AF1)>; /* TIM1_CH1 */
-			bias-pull-down;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-	};
-
-	pwm1_sleep_pins_b: pwm1-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('E', 9, ANALOG)>; /* TIM1_CH1 */
-		};
-	};
-
-	pwm2_pins_a: pwm2-0 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
-			bias-pull-down;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-	};
-
-	pwm2_sleep_pins_a: pwm2-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* TIM2_CH4 */
-		};
-	};
-
-	pwm3_pins_a: pwm3-0 {
-		pins {
-			pinmux = <STM32_PINMUX('C', 7, AF2)>; /* TIM3_CH2 */
-			bias-pull-down;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-	};
-
-	pwm3_sleep_pins_a: pwm3-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('C', 7, ANALOG)>; /* TIM3_CH2 */
-		};
-	};
-
-	pwm3_pins_b: pwm3-1 {
-		pins {
-			pinmux = <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-	};
-
-	pwm3_sleep_pins_b: pwm3-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* TIM3_CH2 */
-		};
-	};
-
-	pwm4_pins_a: pwm4-0 {
-		pins {
-			pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */
-				 <STM32_PINMUX('D', 15, AF2)>; /* TIM4_CH4 */
-			bias-pull-down;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-	};
-
-	pwm4_sleep_pins_a: pwm4-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('D', 14, ANALOG)>, /* TIM4_CH3 */
-				 <STM32_PINMUX('D', 15, ANALOG)>; /* TIM4_CH4 */
-		};
-	};
-
-	pwm4_pins_b: pwm4-1 {
-		pins {
-			pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */
-			bias-pull-down;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-	};
-
-	pwm4_sleep_pins_b: pwm4-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */
-		};
-	};
-
-	pwm5_pins_a: pwm5-0 {
-		pins {
-			pinmux = <STM32_PINMUX('H', 11, AF2)>; /* TIM5_CH2 */
-			bias-pull-down;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-	};
-
-	pwm5_sleep_pins_a: pwm5-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('H', 11, ANALOG)>; /* TIM5_CH2 */
-		};
-	};
-
-	pwm5_pins_b: pwm5-1 {
-		pins {
-			pinmux = <STM32_PINMUX('H', 11, AF2)>, /* TIM5_CH2 */
-				 <STM32_PINMUX('H', 12, AF2)>, /* TIM5_CH3 */
-				 <STM32_PINMUX('I', 0, AF2)>; /* TIM5_CH4 */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-	};
-
-	pwm5_sleep_pins_b: pwm5-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('H', 11, ANALOG)>, /* TIM5_CH2 */
-				 <STM32_PINMUX('H', 12, ANALOG)>, /* TIM5_CH3 */
-				 <STM32_PINMUX('I', 0, ANALOG)>; /* TIM5_CH4 */
-		};
-	};
-
-	pwm8_pins_a: pwm8-0 {
-		pins {
-			pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
-			bias-pull-down;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-	};
-
-	pwm8_sleep_pins_a: pwm8-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('I', 2, ANALOG)>; /* TIM8_CH4 */
-		};
-	};
-
-	pwm12_pins_a: pwm12-0 {
-		pins {
-			pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
-			bias-pull-down;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-	};
-
-	pwm12_sleep_pins_a: pwm12-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('H', 6, ANALOG)>; /* TIM12_CH1 */
-		};
-	};
-
-	qspi_clk_pins_a: qspi-clk-0 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <3>;
-		};
-	};
-
-	qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
-		};
-	};
-
-	qspi_bk1_pins_a: qspi-bk1-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
-				 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
-				 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
-				 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
-			bias-pull-up;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-	};
-
-	qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
-				 <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
-				 <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
-				 <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
-				 <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
-		};
-	};
-
-	qspi_bk2_pins_a: qspi-bk2-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
-				 <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
-				 <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
-				 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
-			bias-pull-up;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-	};
-
-	qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
-				 <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
-				 <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
-				 <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
-				 <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
-		};
-	};
-
-	sai2a_pins_a: sai2a-0 {
-		pins {
-			pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
-				 <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */
-				 <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
-				 <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
-			slew-rate = <0>;
-			drive-push-pull;
-			bias-disable;
-		};
-	};
-
-	sai2a_sleep_pins_a: sai2a-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
-				 <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */
-				 <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
-				 <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
-		};
-	};
-
-	sai2a_pins_b: sai2a-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('I', 6, AF10)>,	/* SAI2_SD_A */
-				 <STM32_PINMUX('I', 7, AF10)>,	/* SAI2_FS_A */
-				 <STM32_PINMUX('D', 13, AF10)>;	/* SAI2_SCK_A */
-			slew-rate = <0>;
-			drive-push-pull;
-			bias-disable;
-		};
-	};
-
-	sai2a_sleep_pins_b: sai2a-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('I', 6, ANALOG)>,  /* SAI2_SD_A */
-				 <STM32_PINMUX('I', 7, ANALOG)>,  /* SAI2_FS_A */
-				 <STM32_PINMUX('D', 13, ANALOG)>; /* SAI2_SCK_A */
-		};
-	};
-
-	sai2a_pins_c: sai2a-2 {
-		pins {
-			pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */
-				 <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */
-				 <STM32_PINMUX('D', 12, AF10)>; /* SAI2_FS_A */
-			slew-rate = <0>;
-			drive-push-pull;
-			bias-disable;
-		};
-	};
-
-	sai2a_sleep_pins_c: sai2a-sleep-2 {
-		pins {
-			pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
-				 <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
-				 <STM32_PINMUX('D', 12, ANALOG)>; /* SAI2_FS_A */
-		};
-	};
-
-	sai2b_pins_a: sai2b-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
-				 <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */
-				 <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */
-			slew-rate = <0>;
-			drive-push-pull;
-			bias-disable;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
-			bias-disable;
-		};
-	};
-
-	sai2b_sleep_pins_a: sai2b-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */
-				 <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */
-				 <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */
-				 <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */
-		};
-	};
-
-	sai2b_pins_b: sai2b-1 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
-			bias-disable;
-		};
-	};
-
-	sai2b_sleep_pins_b: sai2b-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
-		};
-	};
-
-	sai2b_pins_c: sai2b-2 {
-		pins1 {
-			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
-			bias-disable;
-		};
-	};
-
-	sai2b_sleep_pins_c: sai2b-sleep-2 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
-		};
-	};
-
-	sai4a_pins_a: sai4a-0 {
-		pins {
-			pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */
-			slew-rate = <0>;
-			drive-push-pull;
-			bias-disable;
-		};
-	};
-
-	sai4a_sleep_pins_a: sai4a-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */
-		};
-	};
-
-	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
-				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
-				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
-				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
-				 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-disable;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
-			slew-rate = <2>;
-			drive-push-pull;
-			bias-disable;
-		};
-	};
-
-	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
-				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
-				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
-				 <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-disable;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
-			slew-rate = <2>;
-			drive-push-pull;
-			bias-disable;
-		};
-		pins3 {
-			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
-			slew-rate = <1>;
-			drive-open-drain;
-			bias-disable;
-		};
-	};
-
-	sdmmc1_b4_init_pins_a: sdmmc1-b4-init-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
-				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
-				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
-				 <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-disable;
-		};
-	};
-
-	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
-				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
-				 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
-				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
-				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
-				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
-		};
-	};
-
-	sdmmc1_dir_pins_a: sdmmc1-dir-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
-				 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
-				 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-		pins2{
-			pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
-			bias-pull-up;
-		};
-	};
-
-	sdmmc1_dir_init_pins_a: sdmmc1-dir-init-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
-				 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
-				 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-	};
-
-	sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
-				 <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
-				 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
-				 <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
-		};
-	};
-
-	sdmmc1_dir_pins_b: sdmmc1-dir-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
-				 <STM32_PINMUX('E', 14, AF11)>, /* SDMMC1_D123DIR */
-				 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-		pins2{
-			pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
-			bias-pull-up;
-		};
-	};
-
-	sdmmc1_dir_sleep_pins_b: sdmmc1-dir-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
-				 <STM32_PINMUX('E', 14, ANALOG)>, /* SDMMC1_D123DIR */
-				 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
-				 <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
-		};
-	};
-
-	sdmmc2_b4_pins_a: sdmmc2-b4-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
-				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
-				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
-				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
-				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
-			slew-rate = <2>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-	};
-
-	sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
-				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
-				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
-				 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
-			slew-rate = <2>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-		pins3 {
-			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
-			slew-rate = <1>;
-			drive-open-drain;
-			bias-pull-up;
-		};
-	};
-
-	sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
-				 <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
-				 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
-				 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
-				 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
-				 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
-		};
-	};
-
-	sdmmc2_b4_pins_b: sdmmc2-b4-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
-				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
-				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
-				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
-				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-disable;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
-			slew-rate = <2>;
-			drive-push-pull;
-			bias-disable;
-		};
-	};
-
-	sdmmc2_b4_od_pins_b: sdmmc2-b4-od-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
-				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
-				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
-				 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-disable;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
-			slew-rate = <2>;
-			drive-push-pull;
-			bias-disable;
-		};
-		pins3 {
-			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
-			slew-rate = <1>;
-			drive-open-drain;
-			bias-disable;
-		};
-	};
-
-	sdmmc2_d47_pins_a: sdmmc2-d47-0 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
-				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
-				 <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
-				 <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-	};
-
-	sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
-				 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
-				 <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
-				 <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
-		};
-	};
-
-	sdmmc2_d47_pins_b: sdmmc2-d47-1 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 8, AF9)>,  /* SDMMC2_D4 */
-				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
-				 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
-				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-disable;
-		};
-	};
-
-	sdmmc2_d47_sleep_pins_b: sdmmc2-d47-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
-				 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
-				 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
-				 <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
-		};
-	};
-
-	sdmmc2_d47_pins_c: sdmmc2-d47-2 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
-				 <STM32_PINMUX('A', 15, AF9)>, /* SDMMC2_D5 */
-				 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
-				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-	};
-
-	sdmmc2_d47_sleep_pins_c: sdmmc2-d47-sleep-2 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
-				 <STM32_PINMUX('A', 15, ANALOG)>, /* SDMMC2_D5 */
-				 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
-				 <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
-		};
-	};
-
-	sdmmc2_d47_pins_d: sdmmc2-d47-3 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
-				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
-				 <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
-				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
-		};
-	};
-
-	sdmmc2_d47_sleep_pins_d: sdmmc2-d47-sleep-3 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
-				 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
-				 <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
-				 <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
-		};
-	};
-
-	sdmmc3_b4_pins_a: sdmmc3-b4-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
-				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
-				 <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */
-				 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
-				 <STM32_PINMUX('F', 1, AF9)>; /* SDMMC3_CMD */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
-			slew-rate = <2>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-	};
-
-	sdmmc3_b4_od_pins_a: sdmmc3-b4-od-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
-				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
-				 <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */
-				 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
-			slew-rate = <2>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-		pins3 {
-			pinmux = <STM32_PINMUX('F', 1, AF9)>; /* SDMMC2_CMD */
-			slew-rate = <1>;
-			drive-open-drain;
-			bias-pull-up;
-		};
-	};
-
-	sdmmc3_b4_sleep_pins_a: sdmmc3-b4-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */
-				 <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */
-				 <STM32_PINMUX('F', 5, ANALOG)>, /* SDMMC3_D2 */
-				 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
-				 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
-				 <STM32_PINMUX('F', 1, ANALOG)>; /* SDMMC3_CMD */
-		};
-	};
-
-	sdmmc3_b4_pins_b: sdmmc3-b4-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
-				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
-				 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
-				 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
-				 <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
-			slew-rate = <2>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-	};
-
-	sdmmc3_b4_od_pins_b: sdmmc3-b4-od-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
-				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
-				 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
-				 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
-			slew-rate = <2>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-		pins3 {
-			pinmux = <STM32_PINMUX('D', 0, AF10)>; /* SDMMC2_CMD */
-			slew-rate = <1>;
-			drive-open-drain;
-			bias-pull-up;
-		};
-	};
-
-	sdmmc3_b4_sleep_pins_b: sdmmc3-b4-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */
-				 <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */
-				 <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
-				 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
-				 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
-				 <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
-		};
-	};
-
-	spdifrx_pins_a: spdifrx-0 {
-		pins {
-			pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */
-			bias-disable;
-		};
-	};
-
-	spdifrx_sleep_pins_a: spdifrx-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */
-		};
-	};
-
-	spi2_pins_a: spi2-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
-				 <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-
-		pins2 {
-			pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
-			bias-disable;
-		};
-	};
-
-	spi2_pins_b: spi2-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('I', 1, AF5)>, /* SPI2_SCK */
-				 <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-
-		pins2 {
-			pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
-			bias-disable;
-		};
-	};
-
-	spi4_pins_a: spi4-0 {
-		pins {
-			pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
-				 <STM32_PINMUX('E', 6, AF5)>;  /* SPI4_MOSI */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
-			bias-disable;
-		};
-	};
-
-	stusb1600_pins_a: stusb1600-0 {
-		pins {
-			pinmux = <STM32_PINMUX('I', 11, GPIO)>;
-			bias-pull-up;
-		};
-	};
-
-	uart4_pins_a: uart4-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-			bias-disable;
-		};
-	};
-
-	uart4_idle_pins_a: uart4-idle-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-			bias-disable;
-		};
-	};
-
-	uart4_sleep_pins_a: uart4-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
-				 <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
-		};
-	};
-
-	uart4_pins_b: uart4-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-			bias-disable;
-		};
-	};
-
-	uart4_pins_c: uart4-2 {
-		pins1 {
-			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-			bias-disable;
-		};
-	};
-
-	uart4_pins_d: uart4-3 {
-		pins1 {
-			pinmux = <STM32_PINMUX('A', 13, AF8)>; /* UART4_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-			bias-disable;
-		};
-	};
-
-	uart4_idle_pins_d: uart4-idle-3 {
-		pins1 {
-			pinmux = <STM32_PINMUX('A', 13, ANALOG)>; /* UART4_TX */
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-			bias-disable;
-		};
-	};
-
-	uart4_sleep_pins_d: uart4-sleep-3 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 13, ANALOG)>, /* UART4_TX */
-				 <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
-		};
-	};
-
-	uart5_pins_a: uart5-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 13, AF14)>; /* UART5_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 5, AF12)>; /* UART5_RX */
-			bias-disable;
-		};
-	};
-
-	uart7_pins_a: uart7-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART7_RX */
-				 <STM32_PINMUX('E', 10, AF7)>, /* UART7_CTS */
-				 <STM32_PINMUX('E', 9, AF7)>; /* UART7_RTS */
-			bias-disable;
-		};
-	};
-
-	uart7_pins_b: uart7-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */
-			bias-disable;
-		};
-	};
-
-	uart7_pins_c: uart7-2 {
-		pins1 {
-			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
-			bias-pull-up;
-		};
-	};
-
-	uart7_idle_pins_c: uart7-idle-2 {
-		pins1 {
-			pinmux = <STM32_PINMUX('E', 8, ANALOG)>; /* UART7_TX */
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
-			bias-pull-up;
-		};
-	};
-
-	uart7_sleep_pins_c: uart7-sleep-2 {
-		pins {
-			pinmux = <STM32_PINMUX('E', 8, ANALOG)>, /* UART7_TX */
-				 <STM32_PINMUX('E', 7, ANALOG)>; /* UART7_RX */
-		};
-	};
-
-	uart8_pins_a: uart8-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */
-			bias-disable;
-		};
-	};
-
-	uart8_rtscts_pins_a: uart8rtscts-0 {
-		pins {
-			pinmux = <STM32_PINMUX('G', 7, AF8)>, /* UART8_RTS */
-				 <STM32_PINMUX('G', 10, AF8)>; /* UART8_CTS */
-			bias-disable;
-		};
-	};
-
-	usart2_pins_a: usart2-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
-				 <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
-				 <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
-			bias-disable;
-		};
-	};
-
-	usart2_sleep_pins_a: usart2-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
-				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
-				 <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */
-				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
-		};
-	};
-
-	usart2_pins_b: usart2-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
-				 <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('F', 4, AF7)>, /* USART2_RX */
-				 <STM32_PINMUX('E', 15, AF7)>; /* USART2_CTS_NSS */
-			bias-disable;
-		};
-	};
-
-	usart2_sleep_pins_b: usart2-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
-				 <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS */
-				 <STM32_PINMUX('F', 4, ANALOG)>, /* USART2_RX */
-				 <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */
-		};
-	};
-
-	usart2_pins_c: usart2-2 {
-		pins1 {
-			pinmux = <STM32_PINMUX('D', 5, AF7)>, /* USART2_TX */
-				 <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <3>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
-				 <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
-			bias-disable;
-		};
-	};
-
-	usart2_idle_pins_c: usart2-idle-2 {
-		pins1 {
-			pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
-				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <3>;
-		};
-		pins3 {
-			pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
-			bias-disable;
-		};
-	};
-
-	usart2_sleep_pins_c: usart2-sleep-2 {
-		pins {
-			pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
-				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
-				 <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */
-				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
-		};
-	};
-
-	usart3_pins_a: usart3-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
-			bias-disable;
-		};
-	};
-
-	usart3_pins_b: usart3-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
-				 <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
-			bias-pull-up;
-		};
-	};
-
-	usart3_idle_pins_b: usart3-idle-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-				 <STM32_PINMUX('I', 10, ANALOG)>; /* USART3_CTS_NSS */
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins3 {
-			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
-			bias-pull-up;
-		};
-	};
-
-	usart3_sleep_pins_b: usart3-sleep-1 {
-		pins {
-			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
-				 <STM32_PINMUX('I', 10, ANALOG)>, /* USART3_CTS_NSS */
-				 <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
-		};
-	};
-
-	usart3_pins_c: usart3-2 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
-				 <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
-			bias-pull-up;
-		};
-	};
-
-	usart3_idle_pins_c: usart3-idle-2 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-				 <STM32_PINMUX('B', 13, ANALOG)>; /* USART3_CTS_NSS */
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins3 {
-			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
-			bias-pull-up;
-		};
-	};
-
-	usart3_sleep_pins_c: usart3-sleep-2 {
-		pins {
-			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
-				 <STM32_PINMUX('B', 13, ANALOG)>, /* USART3_CTS_NSS */
-				 <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
-		};
-	};
-
-	usart3_pins_d: usart3-3 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('D', 9, AF7)>, /* USART3_RX */
-				 <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
-			bias-disable;
-		};
-	};
-
-	usart3_idle_pins_d: usart3-idle-3 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
-				 <STM32_PINMUX('D', 11, ANALOG)>; /* USART3_CTS_NSS */
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('D', 9, AF7)>; /* USART3_RX */
-			bias-disable;
-		};
-	};
-
-	usart3_sleep_pins_d: usart3-sleep-3 {
-		pins {
-			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
-				 <STM32_PINMUX('D', 11, ANALOG)>, /* USART3_CTS_NSS */
-				 <STM32_PINMUX('D', 9, ANALOG)>; /* USART3_RX */
-		};
-	};
-
-	usart3_pins_e: usart3-4 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 11, AF7)>, /* USART3_RX */
-				 <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
-			bias-pull-up;
-		};
-	};
-
-	usart3_idle_pins_e: usart3-idle-4 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-				 <STM32_PINMUX('D', 11, ANALOG)>; /* USART3_CTS_NSS */
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins3 {
-			pinmux = <STM32_PINMUX('B', 11, AF7)>; /* USART3_RX */
-			bias-pull-up;
-		};
-	};
-
-	usart3_sleep_pins_e: usart3-sleep-4 {
-		pins {
-			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
-				 <STM32_PINMUX('D', 11, ANALOG)>, /* USART3_CTS_NSS */
-				 <STM32_PINMUX('B', 11, ANALOG)>; /* USART3_RX */
-		};
-	};
-
-	usbotg_hs_pins_a: usbotg-hs-0 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
-		};
-	};
-
-	usbotg_fs_dp_dm_pins_a: usbotg-fs-dp-dm-0 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* OTG_FS_DM */
-				 <STM32_PINMUX('A', 12, ANALOG)>; /* OTG_FS_DP */
-		};
-	};
-};
-
-&pinctrl_z {
-	i2c2_pins_b2: i2c2-0 {
-		pins {
-			pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */
-			bias-disable;
-			drive-open-drain;
-			slew-rate = <0>;
-		};
-	};
-
-	i2c2_sleep_pins_b2: i2c2-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */
-		};
-	};
-
-	i2c4_pins_a: i2c4-0 {
-		pins {
-			pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
-				 <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
-			bias-disable;
-			drive-open-drain;
-			slew-rate = <0>;
-		};
-	};
-
-	i2c4_sleep_pins_a: i2c4-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
-				 <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
-		};
-	};
-
-	i2c6_pins_a: i2c6-0 {
-		pins {
-			pinmux = <STM32_PINMUX('Z', 6, AF2)>, /* I2C6_SCL */
-				 <STM32_PINMUX('Z', 7, AF2)>; /* I2C6_SDA */
-			bias-disable;
-			drive-open-drain;
-			slew-rate = <0>;
-		};
-	};
-
-	i2c6_sleep_pins_a: i2c6-sleep-0 {
-		pins {
-			pinmux = <STM32_PINMUX('Z', 6, ANALOG)>, /* I2C6_SCL */
-				 <STM32_PINMUX('Z', 7, ANALOG)>; /* I2C6_SDA */
-		};
-	};
-
-	spi1_pins_a: spi1-0 {
-		pins1 {
-			pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
-				 <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-
-		pins2 {
-			pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
-			bias-disable;
-		};
-	};
-
-	spi1_pins_b: spi1-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
-				 <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-
-		pins2 {
-			pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
-			bias-disable;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
deleted file mode 100644
index 742fdeeff4b6..000000000000
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ /dev/null
@@ -1,1802 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
- * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
- */
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/stm32mp1-clks.h>
-#include <dt-bindings/reset/stm32mp1-resets.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a7";
-			clock-frequency = <650000000>;
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>;
-		interrupt-parent = <&intc>;
-	};
-
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-	};
-
-	intc: interrupt-controller@a0021000 {
-		compatible = "arm,cortex-a7-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xa0021000 0x1000>,
-		      <0xa0022000 0x2000>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
-		interrupt-parent = <&intc>;
-	};
-
-	clocks {
-		clk_hse: clk-hse {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-
-		clk_hsi: clk-hsi {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <64000000>;
-		};
-
-		clk_lse: clk-lse {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		clk_lsi: clk-lsi {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32000>;
-		};
-
-		clk_csi: clk-csi {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <4000000>;
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&dts>;
-
-			trips {
-				cpu_alert1: cpu-alert1 {
-					temperature = <85000>;
-					hysteresis = <0>;
-					type = "passive";
-				};
-
-				cpu-crit {
-					temperature = <120000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-			};
-		};
-	};
-
-	booster: regulator-booster {
-		compatible = "st,stm32mp1-booster";
-		st,syscfg = <&syscfg>;
-		status = "disabled";
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&intc>;
-		ranges;
-
-		timers2: timer@40000000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40000000 0x400>;
-			clocks = <&rcc TIM2_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 18 0x400 0x1>,
-			       <&dmamux1 19 0x400 0x1>,
-			       <&dmamux1 20 0x400 0x1>,
-			       <&dmamux1 21 0x400 0x1>,
-			       <&dmamux1 22 0x400 0x1>;
-			dma-names = "ch1", "ch2", "ch3", "ch4", "up";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@1 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <1>;
-				status = "disabled";
-			};
-
-			counter {
-				compatible = "st,stm32-timer-counter";
-				status = "disabled";
-			};
-		};
-
-		timers3: timer@40001000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40001000 0x400>;
-			clocks = <&rcc TIM3_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 23 0x400 0x1>,
-			       <&dmamux1 24 0x400 0x1>,
-			       <&dmamux1 25 0x400 0x1>,
-			       <&dmamux1 26 0x400 0x1>,
-			       <&dmamux1 27 0x400 0x1>,
-			       <&dmamux1 28 0x400 0x1>;
-			dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@2 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <2>;
-				status = "disabled";
-			};
-
-			counter {
-				compatible = "st,stm32-timer-counter";
-				status = "disabled";
-			};
-		};
-
-		timers4: timer@40002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40002000 0x400>;
-			clocks = <&rcc TIM4_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 29 0x400 0x1>,
-			       <&dmamux1 30 0x400 0x1>,
-			       <&dmamux1 31 0x400 0x1>,
-			       <&dmamux1 32 0x400 0x1>;
-			dma-names = "ch1", "ch2", "ch3", "ch4";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@3 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <3>;
-				status = "disabled";
-			};
-
-			counter {
-				compatible = "st,stm32-timer-counter";
-				status = "disabled";
-			};
-		};
-
-		timers5: timer@40003000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40003000 0x400>;
-			clocks = <&rcc TIM5_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 55 0x400 0x1>,
-			       <&dmamux1 56 0x400 0x1>,
-			       <&dmamux1 57 0x400 0x1>,
-			       <&dmamux1 58 0x400 0x1>,
-			       <&dmamux1 59 0x400 0x1>,
-			       <&dmamux1 60 0x400 0x1>;
-			dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@4 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <4>;
-				status = "disabled";
-			};
-
-			counter {
-				compatible = "st,stm32-timer-counter";
-				status = "disabled";
-			};
-		};
-
-		timers6: timer@40004000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40004000 0x400>;
-			clocks = <&rcc TIM6_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 69 0x400 0x1>;
-			dma-names = "up";
-			status = "disabled";
-
-			timer@5 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <5>;
-				status = "disabled";
-			};
-		};
-
-		timers7: timer@40005000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40005000 0x400>;
-			clocks = <&rcc TIM7_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 70 0x400 0x1>;
-			dma-names = "up";
-			status = "disabled";
-
-			timer@6 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <6>;
-				status = "disabled";
-			};
-		};
-
-		timers12: timer@40006000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40006000 0x400>;
-			clocks = <&rcc TIM12_K>;
-			clock-names = "int";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@11 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <11>;
-				status = "disabled";
-			};
-		};
-
-		timers13: timer@40007000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40007000 0x400>;
-			clocks = <&rcc TIM13_K>;
-			clock-names = "int";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@12 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <12>;
-				status = "disabled";
-			};
-		};
-
-		timers14: timer@40008000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x40008000 0x400>;
-			clocks = <&rcc TIM14_K>;
-			clock-names = "int";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@13 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <13>;
-				status = "disabled";
-			};
-		};
-
-		lptimer1: timer@40009000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-lptimer";
-			reg = <0x40009000 0x400>;
-			interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc LPTIM1_K>;
-			clock-names = "mux";
-			wakeup-source;
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm-lp";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			trigger@0 {
-				compatible = "st,stm32-lptimer-trigger";
-				reg = <0>;
-				status = "disabled";
-			};
-
-			counter {
-				compatible = "st,stm32-lptimer-counter";
-				status = "disabled";
-			};
-		};
-
-		spi2: spi@4000b000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32h7-spi";
-			reg = <0x4000b000 0x400>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SPI2_K>;
-			resets = <&rcc SPI2_R>;
-			dmas = <&dmamux1 39 0x400 0x05>,
-			       <&dmamux1 40 0x400 0x05>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		i2s2: audio-controller@4000b000 {
-			compatible = "st,stm32h7-i2s";
-			#sound-dai-cells = <0>;
-			reg = <0x4000b000 0x400>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&dmamux1 39 0x400 0x01>,
-			       <&dmamux1 40 0x400 0x01>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		spi3: spi@4000c000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32h7-spi";
-			reg = <0x4000c000 0x400>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SPI3_K>;
-			resets = <&rcc SPI3_R>;
-			dmas = <&dmamux1 61 0x400 0x05>,
-			       <&dmamux1 62 0x400 0x05>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		i2s3: audio-controller@4000c000 {
-			compatible = "st,stm32h7-i2s";
-			#sound-dai-cells = <0>;
-			reg = <0x4000c000 0x400>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&dmamux1 61 0x400 0x01>,
-			       <&dmamux1 62 0x400 0x01>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		spdifrx: audio-controller@4000d000 {
-			compatible = "st,stm32h7-spdifrx";
-			#sound-dai-cells = <0>;
-			reg = <0x4000d000 0x400>;
-			clocks = <&rcc SPDIF_K>;
-			clock-names = "kclk";
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&dmamux1 93 0x400 0x01>,
-			       <&dmamux1 94 0x400 0x01>;
-			dma-names = "rx", "rx-ctrl";
-			status = "disabled";
-		};
-
-		usart2: serial@4000e000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x4000e000 0x400>;
-			interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc USART2_K>;
-			wakeup-source;
-			dmas = <&dmamux1 43 0x400 0x15>,
-			       <&dmamux1 44 0x400 0x11>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		usart3: serial@4000f000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x4000f000 0x400>;
-			interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc USART3_K>;
-			wakeup-source;
-			dmas = <&dmamux1 45 0x400 0x15>,
-			       <&dmamux1 46 0x400 0x11>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart4: serial@40010000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x40010000 0x400>;
-			interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc UART4_K>;
-			wakeup-source;
-			dmas = <&dmamux1 63 0x400 0x15>,
-			       <&dmamux1 64 0x400 0x11>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart5: serial@40011000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x40011000 0x400>;
-			interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc UART5_K>;
-			wakeup-source;
-			dmas = <&dmamux1 65 0x400 0x15>,
-			       <&dmamux1 66 0x400 0x11>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		i2c1: i2c@40012000 {
-			compatible = "st,stm32mp15-i2c";
-			reg = <0x40012000 0x400>;
-			interrupt-names = "event", "error";
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc I2C1_K>;
-			resets = <&rcc I2C1_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			st,syscfg-fmp = <&syscfg 0x4 0x1>;
-			wakeup-source;
-			i2c-analog-filter;
-			status = "disabled";
-		};
-
-		i2c2: i2c@40013000 {
-			compatible = "st,stm32mp15-i2c";
-			reg = <0x40013000 0x400>;
-			interrupt-names = "event", "error";
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc I2C2_K>;
-			resets = <&rcc I2C2_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			st,syscfg-fmp = <&syscfg 0x4 0x2>;
-			wakeup-source;
-			i2c-analog-filter;
-			status = "disabled";
-		};
-
-		i2c3: i2c@40014000 {
-			compatible = "st,stm32mp15-i2c";
-			reg = <0x40014000 0x400>;
-			interrupt-names = "event", "error";
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc I2C3_K>;
-			resets = <&rcc I2C3_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			st,syscfg-fmp = <&syscfg 0x4 0x4>;
-			wakeup-source;
-			i2c-analog-filter;
-			status = "disabled";
-		};
-
-		i2c5: i2c@40015000 {
-			compatible = "st,stm32mp15-i2c";
-			reg = <0x40015000 0x400>;
-			interrupt-names = "event", "error";
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc I2C5_K>;
-			resets = <&rcc I2C5_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			st,syscfg-fmp = <&syscfg 0x4 0x10>;
-			wakeup-source;
-			i2c-analog-filter;
-			status = "disabled";
-		};
-
-		cec: cec@40016000 {
-			compatible = "st,stm32-cec";
-			reg = <0x40016000 0x400>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CEC_K>, <&rcc CEC>;
-			clock-names = "cec", "hdmi-cec";
-			status = "disabled";
-		};
-
-		dac: dac@40017000 {
-			compatible = "st,stm32h7-dac-core";
-			reg = <0x40017000 0x400>;
-			clocks = <&rcc DAC12>;
-			clock-names = "pclk";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			dac1: dac@1 {
-				compatible = "st,stm32-dac";
-				#io-channel-cells = <1>;
-				reg = <1>;
-				status = "disabled";
-			};
-
-			dac2: dac@2 {
-				compatible = "st,stm32-dac";
-				#io-channel-cells = <1>;
-				reg = <2>;
-				status = "disabled";
-			};
-		};
-
-		uart7: serial@40018000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x40018000 0x400>;
-			interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc UART7_K>;
-			wakeup-source;
-			dmas = <&dmamux1 79 0x400 0x15>,
-			       <&dmamux1 80 0x400 0x11>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart8: serial@40019000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x40019000 0x400>;
-			interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc UART8_K>;
-			wakeup-source;
-			dmas = <&dmamux1 81 0x400 0x15>,
-			       <&dmamux1 82 0x400 0x11>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		timers1: timer@44000000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x44000000 0x400>;
-			clocks = <&rcc TIM1_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 11 0x400 0x1>,
-			       <&dmamux1 12 0x400 0x1>,
-			       <&dmamux1 13 0x400 0x1>,
-			       <&dmamux1 14 0x400 0x1>,
-			       <&dmamux1 15 0x400 0x1>,
-			       <&dmamux1 16 0x400 0x1>,
-			       <&dmamux1 17 0x400 0x1>;
-			dma-names = "ch1", "ch2", "ch3", "ch4",
-				    "up", "trig", "com";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@0 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <0>;
-				status = "disabled";
-			};
-
-			counter {
-				compatible = "st,stm32-timer-counter";
-				status = "disabled";
-			};
-		};
-
-		timers8: timer@44001000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x44001000 0x400>;
-			clocks = <&rcc TIM8_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 47 0x400 0x1>,
-			       <&dmamux1 48 0x400 0x1>,
-			       <&dmamux1 49 0x400 0x1>,
-			       <&dmamux1 50 0x400 0x1>,
-			       <&dmamux1 51 0x400 0x1>,
-			       <&dmamux1 52 0x400 0x1>,
-			       <&dmamux1 53 0x400 0x1>;
-			dma-names = "ch1", "ch2", "ch3", "ch4",
-				    "up", "trig", "com";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@7 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <7>;
-				status = "disabled";
-			};
-
-			counter {
-				compatible = "st,stm32-timer-counter";
-				status = "disabled";
-			};
-		};
-
-		usart6: serial@44003000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x44003000 0x400>;
-			interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc USART6_K>;
-			wakeup-source;
-			dmas = <&dmamux1 71 0x400 0x15>,
-			       <&dmamux1 72 0x400 0x11>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		spi1: spi@44004000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32h7-spi";
-			reg = <0x44004000 0x400>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SPI1_K>;
-			resets = <&rcc SPI1_R>;
-			dmas = <&dmamux1 37 0x400 0x05>,
-			       <&dmamux1 38 0x400 0x05>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		i2s1: audio-controller@44004000 {
-			compatible = "st,stm32h7-i2s";
-			#sound-dai-cells = <0>;
-			reg = <0x44004000 0x400>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&dmamux1 37 0x400 0x01>,
-			       <&dmamux1 38 0x400 0x01>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		spi4: spi@44005000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32h7-spi";
-			reg = <0x44005000 0x400>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SPI4_K>;
-			resets = <&rcc SPI4_R>;
-			dmas = <&dmamux1 83 0x400 0x05>,
-			       <&dmamux1 84 0x400 0x05>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		timers15: timer@44006000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x44006000 0x400>;
-			clocks = <&rcc TIM15_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 105 0x400 0x1>,
-			       <&dmamux1 106 0x400 0x1>,
-			       <&dmamux1 107 0x400 0x1>,
-			       <&dmamux1 108 0x400 0x1>;
-			dma-names = "ch1", "up", "trig", "com";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@14 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <14>;
-				status = "disabled";
-			};
-		};
-
-		timers16: timer@44007000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x44007000 0x400>;
-			clocks = <&rcc TIM16_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 109 0x400 0x1>,
-			       <&dmamux1 110 0x400 0x1>;
-			dma-names = "ch1", "up";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-			timer@15 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <15>;
-				status = "disabled";
-			};
-		};
-
-		timers17: timer@44008000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-timers";
-			reg = <0x44008000 0x400>;
-			clocks = <&rcc TIM17_K>;
-			clock-names = "int";
-			dmas = <&dmamux1 111 0x400 0x1>,
-			       <&dmamux1 112 0x400 0x1>;
-			dma-names = "ch1", "up";
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			timer@16 {
-				compatible = "st,stm32h7-timer-trigger";
-				reg = <16>;
-				status = "disabled";
-			};
-		};
-
-		spi5: spi@44009000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32h7-spi";
-			reg = <0x44009000 0x400>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SPI5_K>;
-			resets = <&rcc SPI5_R>;
-			dmas = <&dmamux1 85 0x400 0x05>,
-			       <&dmamux1 86 0x400 0x05>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		sai1: sai@4400a000 {
-			compatible = "st,stm32h7-sai";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4400a000 0x400>;
-			reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&rcc SAI1_R>;
-			status = "disabled";
-
-			sai1a: audio-controller@4400a004 {
-				#sound-dai-cells = <0>;
-
-				compatible = "st,stm32-sai-sub-a";
-				reg = <0x4 0x20>;
-				clocks = <&rcc SAI1_K>;
-				clock-names = "sai_ck";
-				dmas = <&dmamux1 87 0x400 0x01>;
-				status = "disabled";
-			};
-
-			sai1b: audio-controller@4400a024 {
-				#sound-dai-cells = <0>;
-				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x20>;
-				clocks = <&rcc SAI1_K>;
-				clock-names = "sai_ck";
-				dmas = <&dmamux1 88 0x400 0x01>;
-				status = "disabled";
-			};
-		};
-
-		sai2: sai@4400b000 {
-			compatible = "st,stm32h7-sai";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4400b000 0x400>;
-			reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&rcc SAI2_R>;
-			status = "disabled";
-
-			sai2a: audio-controller@4400b004 {
-				#sound-dai-cells = <0>;
-				compatible = "st,stm32-sai-sub-a";
-				reg = <0x4 0x20>;
-				clocks = <&rcc SAI2_K>;
-				clock-names = "sai_ck";
-				dmas = <&dmamux1 89 0x400 0x01>;
-				status = "disabled";
-			};
-
-			sai2b: audio-controller@4400b024 {
-				#sound-dai-cells = <0>;
-				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x20>;
-				clocks = <&rcc SAI2_K>;
-				clock-names = "sai_ck";
-				dmas = <&dmamux1 90 0x400 0x01>;
-				status = "disabled";
-			};
-		};
-
-		sai3: sai@4400c000 {
-			compatible = "st,stm32h7-sai";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4400c000 0x400>;
-			reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&rcc SAI3_R>;
-			status = "disabled";
-
-			sai3a: audio-controller@4400c004 {
-				#sound-dai-cells = <0>;
-				compatible = "st,stm32-sai-sub-a";
-				reg = <0x04 0x20>;
-				clocks = <&rcc SAI3_K>;
-				clock-names = "sai_ck";
-				dmas = <&dmamux1 113 0x400 0x01>;
-				status = "disabled";
-			};
-
-			sai3b: audio-controller@4400c024 {
-				#sound-dai-cells = <0>;
-				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x20>;
-				clocks = <&rcc SAI3_K>;
-				clock-names = "sai_ck";
-				dmas = <&dmamux1 114 0x400 0x01>;
-				status = "disabled";
-			};
-		};
-
-		dfsdm: dfsdm@4400d000 {
-			compatible = "st,stm32mp1-dfsdm";
-			reg = <0x4400d000 0x800>;
-			clocks = <&rcc DFSDM_K>;
-			clock-names = "dfsdm";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			dfsdm0: filter@0 {
-				compatible = "st,stm32-dfsdm-adc";
-				#io-channel-cells = <1>;
-				reg = <0>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dmamux1 101 0x400 0x01>;
-				dma-names = "rx";
-				status = "disabled";
-			};
-
-			dfsdm1: filter@1 {
-				compatible = "st,stm32-dfsdm-adc";
-				#io-channel-cells = <1>;
-				reg = <1>;
-				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dmamux1 102 0x400 0x01>;
-				dma-names = "rx";
-				status = "disabled";
-			};
-
-			dfsdm2: filter@2 {
-				compatible = "st,stm32-dfsdm-adc";
-				#io-channel-cells = <1>;
-				reg = <2>;
-				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dmamux1 103 0x400 0x01>;
-				dma-names = "rx";
-				status = "disabled";
-			};
-
-			dfsdm3: filter@3 {
-				compatible = "st,stm32-dfsdm-adc";
-				#io-channel-cells = <1>;
-				reg = <3>;
-				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dmamux1 104 0x400 0x01>;
-				dma-names = "rx";
-				status = "disabled";
-			};
-
-			dfsdm4: filter@4 {
-				compatible = "st,stm32-dfsdm-adc";
-				#io-channel-cells = <1>;
-				reg = <4>;
-				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dmamux1 91 0x400 0x01>;
-				dma-names = "rx";
-				status = "disabled";
-			};
-
-			dfsdm5: filter@5 {
-				compatible = "st,stm32-dfsdm-adc";
-				#io-channel-cells = <1>;
-				reg = <5>;
-				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&dmamux1 92 0x400 0x01>;
-				dma-names = "rx";
-				status = "disabled";
-			};
-		};
-
-		dma1: dma-controller@48000000 {
-			compatible = "st,stm32-dma";
-			reg = <0x48000000 0x400>;
-			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc DMA1>;
-			resets = <&rcc DMA1_R>;
-			#dma-cells = <4>;
-			st,mem2mem;
-			dma-requests = <8>;
-		};
-
-		dma2: dma-controller@48001000 {
-			compatible = "st,stm32-dma";
-			reg = <0x48001000 0x400>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc DMA2>;
-			resets = <&rcc DMA2_R>;
-			#dma-cells = <4>;
-			st,mem2mem;
-			dma-requests = <8>;
-		};
-
-		dmamux1: dma-router@48002000 {
-			compatible = "st,stm32h7-dmamux";
-			reg = <0x48002000 0x40>;
-			#dma-cells = <3>;
-			dma-requests = <128>;
-			dma-masters = <&dma1 &dma2>;
-			dma-channels = <16>;
-			clocks = <&rcc DMAMUX>;
-			resets = <&rcc DMAMUX_R>;
-		};
-
-		adc: adc@48003000 {
-			compatible = "st,stm32mp1-adc-core";
-			reg = <0x48003000 0x400>;
-			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc ADC12>, <&rcc ADC12_K>;
-			clock-names = "bus", "adc";
-			interrupt-controller;
-			st,syscfg = <&syscfg>;
-			#interrupt-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			adc1: adc@0 {
-				compatible = "st,stm32mp1-adc";
-				#io-channel-cells = <1>;
-				reg = <0x0>;
-				interrupt-parent = <&adc>;
-				interrupts = <0>;
-				dmas = <&dmamux1 9 0x400 0x01>;
-				dma-names = "rx";
-				status = "disabled";
-			};
-
-			adc2: adc@100 {
-				compatible = "st,stm32mp1-adc";
-				#io-channel-cells = <1>;
-				reg = <0x100>;
-				interrupt-parent = <&adc>;
-				interrupts = <1>;
-				dmas = <&dmamux1 10 0x400 0x01>;
-				dma-names = "rx";
-				status = "disabled";
-			};
-		};
-
-		sdmmc3: mmc@48004000 {
-			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00253180>;
-			reg = <0x48004000 0x400>;
-			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
-			clocks = <&rcc SDMMC3_K>;
-			clock-names = "apb_pclk";
-			resets = <&rcc SDMMC3_R>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			max-frequency = <120000000>;
-			status = "disabled";
-		};
-
-		usbotg_hs: usb-otg@49000000 {
-			compatible = "st,stm32mp15-hsotg", "snps,dwc2";
-			reg = <0x49000000 0x10000>;
-			clocks = <&rcc USBO_K>;
-			clock-names = "otg";
-			resets = <&rcc USBO_R>;
-			reset-names = "dwc2";
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			g-rx-fifo-size = <512>;
-			g-np-tx-fifo-size = <32>;
-			g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
-			dr_mode = "otg";
-			otg-rev = <0x200>;
-			usb33d-supply = <&usb33>;
-			status = "disabled";
-		};
-
-		ipcc: mailbox@4c001000 {
-			compatible = "st,stm32mp1-ipcc";
-			#mbox-cells = <1>;
-			reg = <0x4c001000 0x400>;
-			st,proc-id = <0>;
-			interrupts-extended =
-				<&exti 61 1>,
-				<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "rx", "tx";
-			clocks = <&rcc IPCC>;
-			wakeup-source;
-			status = "disabled";
-		};
-
-		dcmi: dcmi@4c006000 {
-			compatible = "st,stm32-dcmi";
-			reg = <0x4c006000 0x400>;
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&rcc CAMITF_R>;
-			clocks = <&rcc DCMI>;
-			clock-names = "mclk";
-			dmas = <&dmamux1 75 0x400 0x01>;
-			dma-names = "tx";
-			status = "disabled";
-		};
-
-		rcc: rcc@50000000 {
-			compatible = "st,stm32mp1-rcc", "syscon";
-			reg = <0x50000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		pwr_regulators: pwr@50001000 {
-			compatible = "st,stm32mp1,pwr-reg";
-			reg = <0x50001000 0x10>;
-
-			reg11: reg11 {
-				regulator-name = "reg11";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-			};
-
-			reg18: reg18 {
-				regulator-name = "reg18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			usb33: usb33 {
-				regulator-name = "usb33";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-		};
-
-		pwr_mcu: pwr_mcu@50001014 {
-			compatible = "st,stm32mp151-pwr-mcu", "syscon";
-			reg = <0x50001014 0x4>;
-		};
-
-		exti: interrupt-controller@5000d000 {
-			compatible = "st,stm32mp1-exti", "syscon";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x5000d000 0x400>;
-		};
-
-		syscfg: syscon@50020000 {
-			compatible = "st,stm32mp157-syscfg", "syscon";
-			reg = <0x50020000 0x400>;
-			clocks = <&rcc SYSCFG>;
-		};
-
-		lptimer2: timer@50021000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-lptimer";
-			reg = <0x50021000 0x400>;
-			interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc LPTIM2_K>;
-			clock-names = "mux";
-			wakeup-source;
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm-lp";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			trigger@1 {
-				compatible = "st,stm32-lptimer-trigger";
-				reg = <1>;
-				status = "disabled";
-			};
-
-			counter {
-				compatible = "st,stm32-lptimer-counter";
-				status = "disabled";
-			};
-		};
-
-		lptimer3: timer@50022000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32-lptimer";
-			reg = <0x50022000 0x400>;
-			interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc LPTIM3_K>;
-			clock-names = "mux";
-			wakeup-source;
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm-lp";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			trigger@2 {
-				compatible = "st,stm32-lptimer-trigger";
-				reg = <2>;
-				status = "disabled";
-			};
-		};
-
-		lptimer4: timer@50023000 {
-			compatible = "st,stm32-lptimer";
-			reg = <0x50023000 0x400>;
-			interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc LPTIM4_K>;
-			clock-names = "mux";
-			wakeup-source;
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm-lp";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-		};
-
-		lptimer5: timer@50024000 {
-			compatible = "st,stm32-lptimer";
-			reg = <0x50024000 0x400>;
-			interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc LPTIM5_K>;
-			clock-names = "mux";
-			wakeup-source;
-			status = "disabled";
-
-			pwm {
-				compatible = "st,stm32-pwm-lp";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-		};
-
-		vrefbuf: vrefbuf@50025000 {
-			compatible = "st,stm32-vrefbuf";
-			reg = <0x50025000 0x8>;
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <2500000>;
-			clocks = <&rcc VREF>;
-			status = "disabled";
-		};
-
-		sai4: sai@50027000 {
-			compatible = "st,stm32h7-sai";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x50027000 0x400>;
-			reg = <0x50027000 0x4>, <0x500273f0 0x10>;
-			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&rcc SAI4_R>;
-			status = "disabled";
-
-			sai4a: audio-controller@50027004 {
-				#sound-dai-cells = <0>;
-				compatible = "st,stm32-sai-sub-a";
-				reg = <0x04 0x20>;
-				clocks = <&rcc SAI4_K>;
-				clock-names = "sai_ck";
-				dmas = <&dmamux1 99 0x400 0x01>;
-				status = "disabled";
-			};
-
-			sai4b: audio-controller@50027024 {
-				#sound-dai-cells = <0>;
-				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x20>;
-				clocks = <&rcc SAI4_K>;
-				clock-names = "sai_ck";
-				dmas = <&dmamux1 100 0x400 0x01>;
-				status = "disabled";
-			};
-		};
-
-		dts: thermal@50028000 {
-			compatible = "st,stm32-thermal";
-			reg = <0x50028000 0x100>;
-			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc TMPSENS>;
-			clock-names = "pclk";
-			#thermal-sensor-cells = <0>;
-			status = "disabled";
-		};
-
-		hash1: hash@54002000 {
-			compatible = "st,stm32f756-hash";
-			reg = <0x54002000 0x400>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc HASH1>;
-			resets = <&rcc HASH1_R>;
-			dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>;
-			dma-names = "in";
-			dma-maxburst = <2>;
-			status = "disabled";
-		};
-
-		rng1: rng@54003000 {
-			compatible = "st,stm32-rng";
-			reg = <0x54003000 0x400>;
-			clocks = <&rcc RNG1_K>;
-			resets = <&rcc RNG1_R>;
-			status = "disabled";
-		};
-
-		mdma1: dma-controller@58000000 {
-			compatible = "st,stm32h7-mdma";
-			reg = <0x58000000 0x1000>;
-			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc MDMA>;
-			resets = <&rcc MDMA_R>;
-			#dma-cells = <5>;
-			dma-channels = <32>;
-			dma-requests = <48>;
-		};
-
-		fmc: memory-controller@58002000 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			compatible = "st,stm32mp1-fmc2-ebi";
-			reg = <0x58002000 0x1000>;
-			clocks = <&rcc FMC_K>;
-			resets = <&rcc FMC_R>;
-			status = "disabled";
-
-			ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
-				 <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
-				 <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
-				 <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
-				 <4 0 0x80000000 0x10000000>; /* NAND */
-
-			nand-controller@4,0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "st,stm32mp1-fmc2-nfc";
-				reg = <4 0x00000000 0x1000>,
-				      <4 0x08010000 0x1000>,
-				      <4 0x08020000 0x1000>,
-				      <4 0x01000000 0x1000>,
-				      <4 0x09010000 0x1000>,
-				      <4 0x09020000 0x1000>;
-				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-				dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
-				       <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
-				       <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
-				dma-names = "tx", "rx", "ecc";
-				status = "disabled";
-			};
-		};
-
-		qspi: spi@58003000 {
-			compatible = "st,stm32f469-qspi";
-			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
-			reg-names = "qspi", "qspi_mm";
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>,
-			       <&mdma1 22 0x2 0x10100008 0x0 0x0>;
-			dma-names = "tx", "rx";
-			clocks = <&rcc QSPI_K>;
-			resets = <&rcc QSPI_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		sdmmc1: mmc@58005000 {
-			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00253180>;
-			reg = <0x58005000 0x1000>;
-			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
-			clocks = <&rcc SDMMC1_K>;
-			clock-names = "apb_pclk";
-			resets = <&rcc SDMMC1_R>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			max-frequency = <120000000>;
-			status = "disabled";
-		};
-
-		sdmmc2: mmc@58007000 {
-			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00253180>;
-			reg = <0x58007000 0x1000>;
-			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
-			clocks = <&rcc SDMMC2_K>;
-			clock-names = "apb_pclk";
-			resets = <&rcc SDMMC2_R>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			max-frequency = <120000000>;
-			status = "disabled";
-		};
-
-		crc1: crc@58009000 {
-			compatible = "st,stm32f7-crc";
-			reg = <0x58009000 0x400>;
-			clocks = <&rcc CRC1>;
-			status = "disabled";
-		};
-
-		ethernet0: ethernet@5800a000 {
-			compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
-			reg = <0x5800a000 0x2000>;
-			reg-names = "stmmaceth";
-			interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-			clock-names = "stmmaceth",
-				      "mac-clk-tx",
-				      "mac-clk-rx",
-				      "eth-ck",
-				      "ptp_ref",
-				      "ethstp";
-			clocks = <&rcc ETHMAC>,
-				 <&rcc ETHTX>,
-				 <&rcc ETHRX>,
-				 <&rcc ETHCK_K>,
-				 <&rcc ETHPTP_K>,
-				 <&rcc ETHSTP>;
-			st,syscon = <&syscfg 0x4>;
-			snps,mixed-burst;
-			snps,pbl = <2>;
-			snps,en-tx-lpi-clockgating;
-			snps,axi-config = <&stmmac_axi_config_0>;
-			snps,tso;
-			status = "disabled";
-
-			stmmac_axi_config_0: stmmac-axi-config {
-				snps,wr_osr_lmt = <0x7>;
-				snps,rd_osr_lmt = <0x7>;
-				snps,blen = <0 0 0 0 16 8 4>;
-			};
-		};
-
-		usbh_ohci: usb@5800c000 {
-			compatible = "generic-ohci";
-			reg = <0x5800c000 0x1000>;
-			clocks = <&usbphyc>, <&rcc USBH>;
-			resets = <&rcc USBH_R>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		usbh_ehci: usb@5800d000 {
-			compatible = "generic-ehci";
-			reg = <0x5800d000 0x1000>;
-			clocks = <&usbphyc>, <&rcc USBH>;
-			resets = <&rcc USBH_R>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			companion = <&usbh_ohci>;
-			status = "disabled";
-		};
-
-		ltdc: display-controller@5a001000 {
-			compatible = "st,stm32-ltdc";
-			reg = <0x5a001000 0x400>;
-			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc LTDC_PX>;
-			clock-names = "lcd";
-			resets = <&rcc LTDC_R>;
-			status = "disabled";
-
-			port {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		iwdg2: watchdog@5a002000 {
-			compatible = "st,stm32mp1-iwdg";
-			reg = <0x5a002000 0x400>;
-			clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
-			clock-names = "pclk", "lsi";
-			status = "disabled";
-		};
-
-		usbphyc: usbphyc@5a006000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#clock-cells = <0>;
-			compatible = "st,stm32mp1-usbphyc";
-			reg = <0x5a006000 0x1000>;
-			clocks = <&rcc USBPHY_K>;
-			resets = <&rcc USBPHY_R>;
-			vdda1v1-supply = <&reg11>;
-			vdda1v8-supply = <&reg18>;
-			status = "disabled";
-
-			usbphyc_port0: usb-phy@0 {
-				#phy-cells = <0>;
-				reg = <0>;
-			};
-
-			usbphyc_port1: usb-phy@1 {
-				#phy-cells = <1>;
-				reg = <1>;
-			};
-		};
-
-		usart1: serial@5c000000 {
-			compatible = "st,stm32h7-uart";
-			reg = <0x5c000000 0x400>;
-			interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc USART1_K>;
-			wakeup-source;
-			status = "disabled";
-		};
-
-		spi6: spi@5c001000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "st,stm32h7-spi";
-			reg = <0x5c001000 0x400>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc SPI6_K>;
-			resets = <&rcc SPI6_R>;
-			dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
-			       <&mdma1 35 0x0 0x40002 0x0 0x0>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		i2c4: i2c@5c002000 {
-			compatible = "st,stm32mp15-i2c";
-			reg = <0x5c002000 0x400>;
-			interrupt-names = "event", "error";
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc I2C4_K>;
-			resets = <&rcc I2C4_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			st,syscfg-fmp = <&syscfg 0x4 0x8>;
-			wakeup-source;
-			i2c-analog-filter;
-			status = "disabled";
-		};
-
-		rtc: rtc@5c004000 {
-			compatible = "st,stm32mp1-rtc";
-			reg = <0x5c004000 0x400>;
-			clocks = <&rcc RTCAPB>, <&rcc RTC>;
-			clock-names = "pclk", "rtc_ck";
-			interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		bsec: efuse@5c005000 {
-			compatible = "st,stm32mp15-bsec";
-			reg = <0x5c005000 0x400>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ts_cal1: calib@5c {
-				reg = <0x5c 0x2>;
-			};
-			ts_cal2: calib@5e {
-				reg = <0x5e 0x2>;
-			};
-		};
-
-		i2c6: i2c@5c009000 {
-			compatible = "st,stm32mp15-i2c";
-			reg = <0x5c009000 0x400>;
-			interrupt-names = "event", "error";
-			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc I2C6_K>;
-			resets = <&rcc I2C6_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			st,syscfg-fmp = <&syscfg 0x4 0x20>;
-			wakeup-source;
-			i2c-analog-filter;
-			status = "disabled";
-		};
-
-		tamp: tamp@5c00a000 {
-			compatible = "st,stm32-tamp", "syscon", "simple-mfd";
-			reg = <0x5c00a000 0x400>;
-		};
-
-		/*
-		 * Break node order to solve dependency probe issue between
-		 * pinctrl and exti.
-		 */
-		pinctrl: pinctrl@50002000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stm32mp157-pinctrl";
-			ranges = <0 0x50002000 0xa400>;
-			interrupt-parent = <&exti>;
-			st,syscfg = <&exti 0x60 0xff>;
-			pins-are-numbered;
-
-			gpioa: gpio@50002000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x400>;
-				clocks = <&rcc GPIOA>;
-				st,bank-name = "GPIOA";
-				status = "disabled";
-			};
-
-			gpiob: gpio@50003000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1000 0x400>;
-				clocks = <&rcc GPIOB>;
-				st,bank-name = "GPIOB";
-				status = "disabled";
-			};
-
-			gpioc: gpio@50004000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2000 0x400>;
-				clocks = <&rcc GPIOC>;
-				st,bank-name = "GPIOC";
-				status = "disabled";
-			};
-
-			gpiod: gpio@50005000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x3000 0x400>;
-				clocks = <&rcc GPIOD>;
-				st,bank-name = "GPIOD";
-				status = "disabled";
-			};
-
-			gpioe: gpio@50006000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x4000 0x400>;
-				clocks = <&rcc GPIOE>;
-				st,bank-name = "GPIOE";
-				status = "disabled";
-			};
-
-			gpiof: gpio@50007000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x5000 0x400>;
-				clocks = <&rcc GPIOF>;
-				st,bank-name = "GPIOF";
-				status = "disabled";
-			};
-
-			gpiog: gpio@50008000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x6000 0x400>;
-				clocks = <&rcc GPIOG>;
-				st,bank-name = "GPIOG";
-				status = "disabled";
-			};
-
-			gpioh: gpio@50009000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x7000 0x400>;
-				clocks = <&rcc GPIOH>;
-				st,bank-name = "GPIOH";
-				status = "disabled";
-			};
-
-			gpioi: gpio@5000a000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x8000 0x400>;
-				clocks = <&rcc GPIOI>;
-				st,bank-name = "GPIOI";
-				status = "disabled";
-			};
-
-			gpioj: gpio@5000b000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x9000 0x400>;
-				clocks = <&rcc GPIOJ>;
-				st,bank-name = "GPIOJ";
-				status = "disabled";
-			};
-
-			gpiok: gpio@5000c000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0xa000 0x400>;
-				clocks = <&rcc GPIOK>;
-				st,bank-name = "GPIOK";
-				status = "disabled";
-			};
-		};
-
-		pinctrl_z: pinctrl@54004000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stm32mp157-z-pinctrl";
-			ranges = <0 0x54004000 0x400>;
-			pins-are-numbered;
-			interrupt-parent = <&exti>;
-			st,syscfg = <&exti 0x60 0xff>;
-
-			gpioz: gpio@54004000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0 0x400>;
-				clocks = <&rcc GPIOZ>;
-				st,bank-name = "GPIOZ";
-				st,bank-ioport = <11>;
-				status = "disabled";
-			};
-		};
-	};
-
-	mlahb: ahb {
-		compatible = "st,mlahb", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		dma-ranges = <0x00000000 0x38000000 0x10000>,
-			     <0x10000000 0x10000000 0x60000>,
-			     <0x30000000 0x30000000 0x60000>;
-
-		m4_rproc: m4@10000000 {
-			compatible = "st,stm32mp1-m4";
-			reg = <0x10000000 0x40000>,
-			      <0x30000000 0x40000>,
-			      <0x38000000 0x10000>;
-			resets = <&rcc MCU_R>;
-			st,syscfg-holdboot = <&rcc 0x10C 0x1>;
-			st,syscfg-tz = <&rcc 0x000 0x1>;
-			st,syscfg-pdds = <&pwr_mcu 0x0 0x1>;
-			st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
-			st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1c.dts b/arch/arm/boot/dts/stm32mp151a-prtt1c.dts
deleted file mode 100644
index 7ecf31263abc..000000000000
--- a/arch/arm/boot/dts/stm32mp151a-prtt1c.dts
+++ /dev/null
@@ -1,304 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) Protonic Holland
- * Author: David Jander <david@protonic.nl>
- */
-/dts-v1/;
-
-#include "stm32mp151a-prtt1l.dtsi"
-
-/ {
-	model = "Protonic PRTT1C";
-	compatible = "prt,prtt1c", "st,stm32mp151";
-
-	clock_ksz9031: clock-ksz9031 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	clock_sja1105: clock-sja1105 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	mdio0: mdio {
-		compatible = "virtual,mdio-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpios = <&gpioc 1 GPIO_ACTIVE_HIGH
-			 &gpioa 2 GPIO_ACTIVE_HIGH>;
-
-	};
-
-	wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpiod 8 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&ethernet0 {
-	fixed-link {
-		speed = <100>;
-		full-duplex;
-	};
-};
-
-&gpioa {
-	gpio-line-names =
-		"", "", "", "PHY0_nRESET", "PHY0_nINT", "", "", "",
-		"", "", "", "", "", "", "", "SPI1_nSS";
-};
-
-&gpiod {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"WFM_RESET", "", "", "", "", "", "", "";
-};
-
-&gpioe {
-	gpio-line-names =
-		"SDMMC2_nRESET", "", "", "", "", "", "SPI1_nRESET", "",
-		"", "", "", "", "WFM_nIRQ", "", "", "";
-};
-
-&gpiog {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "PHY3_nINT",
-		"PHY1_nINT", "PHY3_nRESET", "PHY2_nINT", "PHY2_nRESET",
-		"PHY1_nRESET", "SPE1_PWR", "SPE0_PWR", "";
-};
-
-&mdio0 {
-	/* All this DP83TD510E PHYs can't be probed before switch@0 is
-	 * probed so we need to use compatible with PHYid
-	 */
-	/* TI DP83TD510E */
-	t1l0_phy: ethernet-phy@6 {
-		compatible = "ethernet-phy-id2000.0181";
-		reg = <6>;
-		interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <10>;
-		reset-deassert-us = <35>;
-	};
-
-	/* TI DP83TD510E */
-	t1l1_phy: ethernet-phy@7 {
-		compatible = "ethernet-phy-id2000.0181";
-		reg = <7>;
-		interrupts-extended = <&gpiog 8 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpiog 12 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <10>;
-		reset-deassert-us = <35>;
-	};
-
-	/* TI DP83TD510E */
-	t1l2_phy: ethernet-phy@10 {
-		compatible = "ethernet-phy-id2000.0181";
-		reg = <10>;
-		interrupts-extended = <&gpiog 10 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpiog 11 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <10>;
-		reset-deassert-us = <35>;
-	};
-
-	/* Micrel KSZ9031 */
-	rj45_phy: ethernet-phy@2 {
-		reg = <2>;
-		interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <10000>;
-		reset-deassert-us = <1000>;
-
-		clocks = <&clock_ksz9031>;
-	};
-};
-
-&qspi {
-	status = "disabled";
-};
-
-&sdmmc2 {
-	pinctrl-names = "default", "opendrain", "sleep";
-	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
-	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
-	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
-	non-removable;
-	no-sd;
-	no-sdio;
-	no-1-8-v;
-	st,neg-edge;
-	bus-width = <8>;
-	vmmc-supply = <&reg_3v3>;
-	vqmmc-supply = <&reg_3v3>;
-	status = "okay";
-};
-
-&sdmmc2_b4_od_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
-			 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
-			 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
-			 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
-	};
-};
-
-&sdmmc2_b4_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
-			 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
-			 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
-			 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
-			 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
-	};
-};
-
-&sdmmc2_b4_sleep_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
-			 <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */
-			 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
-			 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
-			 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
-			 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
-	};
-};
-
-&sdmmc2_d47_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
-			 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
-			 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
-			 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
-	};
-};
-
-&sdmmc2_d47_sleep_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
-			 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
-			 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
-			 <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
-	};
-};
-
-&sdmmc3 {
-	pinctrl-names = "default", "opendrain", "sleep";
-	pinctrl-0 = <&sdmmc3_b4_pins_b>;
-	pinctrl-1 = <&sdmmc3_b4_od_pins_b>;
-	pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>;
-	non-removable;
-	no-1-8-v;
-	st,neg-edge;
-	bus-width = <4>;
-	vmmc-supply = <&reg_3v3>;
-	vqmmc-supply = <&reg_3v3>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	mmc@1 {
-		compatible = "prt,prtt1c-wfm200", "silabs,wf200";
-		reg = <1>;
-	};
-};
-
-&sdmmc3_b4_od_pins_b {
-	pins1 {
-		pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
-			 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
-			 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
-			 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
-	};
-};
-
-&sdmmc3_b4_pins_b {
-	pins1 {
-		pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
-			 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
-			 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
-			 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
-			 <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
-	};
-};
-
-&sdmmc3_b4_sleep_pins_b {
-	pins {
-		pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */
-			 <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */
-			 <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
-			 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
-			 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
-			 <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
-	};
-};
-
-&spi1 {
-	pinctrl-0 = <&spi1_pins_b>;
-	pinctrl-names = "default";
-	cs-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "okay";
-
-	switch@0 {
-		compatible = "nxp,sja1105q";
-		reg = <0>;
-		spi-max-frequency = <4000000>;
-		spi-rx-delay-us = <1>;
-		spi-tx-delay-us = <1>;
-		spi-cpha;
-
-		reset-gpios = <&gpioe 6 GPIO_ACTIVE_LOW>;
-
-		clocks = <&clock_sja1105>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "t1l0";
-				phy-mode = "rmii";
-				phy-handle = <&t1l0_phy>;
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "t1l1";
-				phy-mode = "rmii";
-				phy-handle = <&t1l1_phy>;
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "t1l2";
-				phy-mode = "rmii";
-				phy-handle = <&t1l2_phy>;
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "rj45";
-				phy-handle = <&rj45_phy>;
-				phy-mode = "rgmii-id";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "cpu";
-				ethernet = <&ethernet0>;
-				phy-mode = "rmii";
-
-				fixed-link {
-					speed = <100>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
deleted file mode 100644
index d865ab5d866b..000000000000
--- a/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
+++ /dev/null
@@ -1,229 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) Protonic Holland
- * Author: David Jander <david@protonic.nl>
- */
-/dts-v1/;
-
-#include "stm32mp151.dtsi"
-#include "stm32mp15-pinctrl.dtsi"
-#include "stm32mp15xxad-pinctrl.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	aliases {
-		ethernet0 = &ethernet0;
-		mdio-gpio0 = &mdio0;
-		serial0 = &uart4;
-	};
-
-	led-controller-0 {
-		compatible = "gpio-leds";
-
-		led-0 {
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_INDICATOR;
-			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
-		};
-
-		led-1 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-
-	/* DP83TD510E PHYs have max MDC rate of 1.75MHz. Since we can't reduce
-	 * stmmac MDC clock without reducing system bus rate, we need to use
-	 * gpio based MDIO bus.
-	 */
-	mdio0: mdio {
-		compatible = "virtual,mdio-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpios = <&gpioc 1 GPIO_ACTIVE_HIGH
-			 &gpioa 2 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&dts {
-	status = "okay";
-};
-
-&ethernet0 {
-	pinctrl-0 = <&ethernet0_rmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>;
-	pinctrl-names = "default", "sleep";
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&ethernet0_rmii_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
-			 <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
-			 <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */
-	};
-	pins2 {
-		pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
-			 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
-			 <STM32_PINMUX('A', 1, AF11)>,  /* ETH1_RMII_REF_CLK input */
-			 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
-	};
-};
-
-&ethernet0_rmii_sleep_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
-			 <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
-			 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
-			 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
-			 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
-			 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
-			 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
-	};
-};
-
-&iwdg2 {
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
-	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "spi-nand";
-		reg = <0>;
-		spi-rx-bus-width = <4>;
-		spi-max-frequency = <104000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&qspi_bk1_pins_a {
-	pins1 {
-		bias-pull-up;
-		drive-push-pull;
-		slew-rate = <1>;
-	};
-};
-
-&rng1 {
-	status = "okay";
-};
-
-&sdmmc1 {
-	pinctrl-names = "default", "opendrain", "sleep";
-	pinctrl-0 = <&sdmmc1_b4_pins_a>;
-	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
-	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	broken-cd;
-	st,neg-edge;
-	bus-width = <4>;
-	vmmc-supply = <&reg_3v3>;
-	vqmmc-supply = <&reg_3v3>;
-	status = "okay";
-};
-
-&sdmmc1_b4_od_pins_a {
-	pins1 {
-		bias-pull-up;
-	};
-	pins2 {
-		bias-pull-up;
-	};
-};
-
-&sdmmc1_b4_pins_a {
-	pins1 {
-		bias-pull-up;
-	};
-	pins2 {
-		bias-pull-up;
-	};
-};
-
-&uart4 {
-	pinctrl-names = "default", "sleep", "idle";
-	pinctrl-0 = <&uart4_pins_a>;
-	pinctrl-1 = <&uart4_sleep_pins_a>;
-	pinctrl-2 = <&uart4_idle_pins_a>;
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "okay";
-};
-
-&uart4_idle_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */
-	};
-	pins2 {
-		pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-		bias-pull-up;
-	};
-};
-
-&uart4_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
-		bias-disable;
-		drive-push-pull;
-		slew-rate = <0>;
-	};
-	pins2 {
-		pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-		bias-pull-up;
-	};
-};
-
-&uart4_sleep_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */
-			<STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
-	};
-};
-
-&usbh_ehci {
-	phys = <&usbphyc_port0>;
-	phy-names = "usb";
-	status = "okay";
-};
-
-&usbotg_hs {
-	dr_mode = "host";
-	pinctrl-0 = <&usbotg_hs_pins_a>;
-	pinctrl-names = "default";
-	phys = <&usbphyc_port1 0>;
-	phy-names = "usb2-phy";
-	status = "okay";
-};
-
-&usbphyc {
-	status = "okay";
-};
-
-&usbphyc_port0 {
-	phy-supply = <&reg_3v3>;
-};
-
-&usbphyc_port1 {
-	phy-supply = <&reg_3v3>;
-};
diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi
deleted file mode 100644
index 486084e0b80b..000000000000
--- a/arch/arm/boot/dts/stm32mp153.dtsi
+++ /dev/null
@@ -1,59 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
- */
-
-#include "stm32mp151.dtsi"
-
-/ {
-	cpus {
-		cpu1: cpu@1 {
-			compatible = "arm,cortex-a7";
-			clock-frequency = <650000000>;
-			device_type = "cpu";
-			reg = <1>;
-		};
-	};
-
-	arm-pmu {
-		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
-	};
-
-	timer {
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	soc {
-		m_can1: can@4400e000 {
-			compatible = "bosch,m_can";
-			reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
-			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "int0", "int1";
-			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
-			clock-names = "hclk", "cclk";
-			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
-			status = "disabled";
-		};
-
-		m_can2: can@4400f000 {
-			compatible = "bosch,m_can";
-			reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
-			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "int0", "int1";
-			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
-			clock-names = "hclk", "cclk";
-			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
deleted file mode 100644
index 2bc92ef3aeb9..000000000000
--- a/arch/arm/boot/dts/stm32mp157c-dk2.dts
+++ /dev/null
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
- */
-
-/dts-v1/;
-
-#include "stm32mp157.dtsi"
-#include "stm32mp15xc.dtsi"
-#include "stm32mp15-pinctrl.dtsi"
-#include "stm32mp15xxac-pinctrl.dtsi"
-#include "stm32mp15xx-dkx.dtsi"
-
-/ {
-	model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
-	compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
-
-	aliases {
-		ethernet0 = &ethernet0;
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart7;
-		serial3 = &usart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&cryp1 {
-	status = "okay";
-};
-
-&dsi {
-	status = "okay";
-	phy-dsi-supply = <&reg18>;
-
-	ports {
-		port@0 {
-			reg = <0>;
-			dsi_in: endpoint {
-				remote-endpoint = <&ltdc_ep1_out>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			dsi_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-
-	panel@0 {
-		compatible = "orisetech,otm8009a";
-		reg = <0>;
-		reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
-		power-supply = <&v3v3>;
-		status = "okay";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dsi_out>;
-			};
-		};
-	};
-};
-
-&i2c1 {
-	touchscreen@38 {
-		compatible = "focaltech,ft6236";
-		reg = <0x38>;
-		interrupts = <2 2>;
-		interrupt-parent = <&gpiof>;
-		interrupt-controller;
-		touchscreen-size-x = <480>;
-		touchscreen-size-y = <800>;
-		status = "okay";
-	};
-};
-
-&ltdc {
-	status = "okay";
-
-	port {
-		ltdc_ep1_out: endpoint@1 {
-			reg = <1>;
-			remote-endpoint = <&dsi_in>;
-		};
-	};
-};
-
-&usart2 {
-	pinctrl-names = "default", "sleep", "idle";
-	pinctrl-0 = <&usart2_pins_c>;
-	pinctrl-1 = <&usart2_sleep_pins_c>;
-	pinctrl-2 = <&usart2_idle_pins_c>;
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/stm32mp15xc.dtsi b/arch/arm/boot/dts/stm32mp15xc.dtsi
deleted file mode 100644
index b06a55a2fa18..000000000000
--- a/arch/arm/boot/dts/stm32mp15xc.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
- */
-
-/ {
-	soc {
-		cryp1: cryp@54001000 {
-			compatible = "st,stm32mp1-cryp";
-			reg = <0x54001000 0x400>;
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CRYP1>;
-			resets = <&rcc CRYP1_R>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
deleted file mode 100644
index 04e59b8381cb..000000000000
--- a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR X11)
-/*
- * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
- */
-
-/dts-v1/;
-#include "suniv-f1c100s.dtsi"
-
-/ {
-	model = "Lichee Pi Nano";
-	compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
-
-	aliases {
-		mmc0 = &mmc0;
-		serial0 = &uart0;
-		spi0 = &spi0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reg_vcc3v3: vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&mmc0 {
-	broken-cd;
-	bus-width = <4>;
-	disable-wp;
-	status = "okay";
-	vmmc-supply = <&reg_vcc3v3>;
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pc_pins>;
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "winbond,w25q128", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pe_pins>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
deleted file mode 100644
index 0edc1724407b..000000000000
--- a/arch/arm/boot/dts/suniv-f1c100s.dtsi
+++ /dev/null
@@ -1,228 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR X11)
-/*
- * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
- * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
- */
-
-#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
-#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	clocks {
-		osc24M: clk-24M {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-			clock-output-names = "osc24M";
-		};
-
-		osc32k: clk-32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0x0>;
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		sram-controller@1c00000 {
-			compatible = "allwinner,suniv-f1c100s-system-control",
-				     "allwinner,sun4i-a10-system-control";
-			reg = <0x01c00000 0x30>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			sram_d: sram@10000 {
-				compatible = "mmio-sram";
-				reg = <0x00010000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x00010000 0x1000>;
-
-				otg_sram: sram-section@0 {
-					compatible = "allwinner,suniv-f1c100s-sram-d",
-						     "allwinner,sun4i-a10-sram-d";
-					reg = <0x0000 0x1000>;
-					status = "disabled";
-				};
-			};
-		};
-
-		spi0: spi@1c05000 {
-			compatible = "allwinner,suniv-f1c100s-spi",
-				     "allwinner,sun8i-h3-spi";
-			reg = <0x01c05000 0x1000>;
-			interrupts = <10>;
-			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>;
-			clock-names = "ahb", "mod";
-			resets = <&ccu RST_BUS_SPI0>;
-			status = "disabled";
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@1c06000 {
-			compatible = "allwinner,suniv-f1c100s-spi",
-				     "allwinner,sun8i-h3-spi";
-			reg = <0x01c06000 0x1000>;
-			interrupts = <11>;
-			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>;
-			clock-names = "ahb", "mod";
-			resets = <&ccu RST_BUS_SPI1>;
-			status = "disabled";
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		mmc0: mmc@1c0f000 {
-			compatible = "allwinner,suniv-f1c100s-mmc",
-				     "allwinner,sun7i-a20-mmc";
-			reg = <0x01c0f000 0x1000>;
-			clocks = <&ccu CLK_BUS_MMC0>,
-				 <&ccu CLK_MMC0>,
-				 <&ccu CLK_MMC0_OUTPUT>,
-				 <&ccu CLK_MMC0_SAMPLE>;
-			clock-names = "ahb", "mmc", "output", "sample";
-			resets = <&ccu RST_BUS_MMC0>;
-			reset-names = "ahb";
-			interrupts = <23>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		mmc1: mmc@1c10000 {
-			compatible = "allwinner,suniv-f1c100s-mmc",
-				     "allwinner,sun7i-a20-mmc";
-			reg = <0x01c10000 0x1000>;
-			clocks = <&ccu CLK_BUS_MMC1>,
-				 <&ccu CLK_MMC1>,
-				 <&ccu CLK_MMC1_OUTPUT>,
-				 <&ccu CLK_MMC1_SAMPLE>;
-			clock-names = "ahb", "mmc", "output", "sample";
-			resets = <&ccu RST_BUS_MMC1>;
-			reset-names = "ahb";
-			interrupts = <24>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		ccu: clock@1c20000 {
-			compatible = "allwinner,suniv-f1c100s-ccu";
-			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&osc32k>;
-			clock-names = "hosc", "losc";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		intc: interrupt-controller@1c20400 {
-			compatible = "allwinner,suniv-f1c100s-ic";
-			reg = <0x01c20400 0x400>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		pio: pinctrl@1c20800 {
-			compatible = "allwinner,suniv-f1c100s-pinctrl";
-			reg = <0x01c20800 0x400>;
-			interrupts = <38>, <39>, <40>;
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
-			clock-names = "apb", "hosc", "losc";
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			#gpio-cells = <3>;
-
-			mmc0_pins: mmc0-pins {
-				pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
-				function = "mmc0";
-				drive-strength = <30>;
-			};
-
-			spi0_pc_pins: spi0-pc-pins {
-				pins = "PC0", "PC1", "PC2", "PC3";
-				function = "spi0";
-			};
-
-			uart0_pe_pins: uart0-pe-pins {
-				pins = "PE0", "PE1";
-				function = "uart0";
-			};
-		};
-
-		timer@1c20c00 {
-			compatible = "allwinner,suniv-f1c100s-timer";
-			reg = <0x01c20c00 0x90>;
-			interrupts = <13>, <14>, <15>;
-			clocks = <&osc24M>;
-		};
-
-		wdt: watchdog@1c20ca0 {
-			compatible = "allwinner,suniv-f1c100s-wdt",
-				     "allwinner,sun6i-a31-wdt";
-			reg = <0x01c20ca0 0x20>;
-			interrupts = <16>;
-			clocks = <&osc32k>;
-		};
-
-		uart0: serial@1c25000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c25000 0x400>;
-			interrupts = <1>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&ccu CLK_BUS_UART0>;
-			resets = <&ccu RST_BUS_UART0>;
-			status = "disabled";
-		};
-
-		uart1: serial@1c25400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c25400 0x400>;
-			interrupts = <2>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&ccu CLK_BUS_UART1>;
-			resets = <&ccu RST_BUS_UART1>;
-			status = "disabled";
-		};
-
-		uart2: serial@1c25800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c25800 0x400>;
-			interrupts = <3>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&ccu CLK_BUS_UART2>;
-			resets = <&ccu RST_BUS_UART2>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/sunplus/Makefile b/arch/arm/boot/dts/sunplus/Makefile
new file mode 100644
index 000000000000..868f2ea0c127
--- /dev/null
+++ b/arch/arm/boot/dts/sunplus/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_SP7021) += \
+	sunplus-sp7021-demo-v3.dtb
+dtb-$(CONFIG_SOC_SP7021) += \
+	sunplus-sp7021-demo-v3.dtb
diff --git a/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi b/arch/arm/boot/dts/sunplus/sunplus-sp7021-achip.dtsi
index 493d32357e4e..493d32357e4e 100644
--- a/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi
+++ b/arch/arm/boot/dts/sunplus/sunplus-sp7021-achip.dtsi
diff --git a/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts b/arch/arm/boot/dts/sunplus/sunplus-sp7021-demo-v3.dts
index d5c5ffc20565..d5c5ffc20565 100644
--- a/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts
+++ b/arch/arm/boot/dts/sunplus/sunplus-sp7021-demo-v3.dts
diff --git a/arch/arm/boot/dts/sunplus-sp7021.dtsi b/arch/arm/boot/dts/sunplus/sunplus-sp7021.dtsi
index 7dc4ce3619c7..ae9bbe0320b8 100644
--- a/arch/arm/boot/dts/sunplus-sp7021.dtsi
+++ b/arch/arm/boot/dts/sunplus/sunplus-sp7021.dtsi
@@ -211,7 +211,6 @@
 			interrupt-names = "dma_w", "master_risc", "slave_risc";
 			clocks = <&clkc CLK_SPI_COMBO_1>;
 			resets = <&rstc RST_SPI_COMBO_1>;
-			spi-max-frequency = <25000000>;
 			status = "disabled";
 		};
 
@@ -225,7 +224,6 @@
 			interrupt-names = "dma_w", "master_risc", "slave_risc";
 			clocks = <&clkc CLK_SPI_COMBO_2>;
 			resets = <&rstc RST_SPI_COMBO_2>;
-			spi-max-frequency = <25000000>;
 			status = "disabled";
 		};
 
@@ -239,7 +237,6 @@
 			interrupt-names = "dma_w", "master_risc", "slave_risc";
 			clocks = <&clkc CLK_SPI_COMBO_3>;
 			resets = <&rstc RST_SPI_COMBO_3>;
-			spi-max-frequency = <25000000>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/synaptics/Makefile b/arch/arm/boot/dts/synaptics/Makefile
new file mode 100644
index 000000000000..0ecccd156d18
--- /dev/null
+++ b/arch/arm/boot/dts/synaptics/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_BERLIN) += \
+	berlin2-sony-nsz-gs7.dtb \
+	berlin2cd-google-chromecast.dtb \
+	berlin2cd-valve-steamlink.dtb \
+	berlin2q-marvell-dmp.dtb
diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/synaptics/berlin2-sony-nsz-gs7.dts
index 64a297759eb9..64a297759eb9 100644
--- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
+++ b/arch/arm/boot/dts/synaptics/berlin2-sony-nsz-gs7.dts
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/synaptics/berlin2.dtsi
index 1114c592e461..1114c592e461 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/synaptics/berlin2.dtsi
diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/synaptics/berlin2cd-google-chromecast.dts
index c1d91424e658..c1d91424e658 100644
--- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
+++ b/arch/arm/boot/dts/synaptics/berlin2cd-google-chromecast.dts
diff --git a/arch/arm/boot/dts/berlin2cd-valve-steamlink.dts b/arch/arm/boot/dts/synaptics/berlin2cd-valve-steamlink.dts
index 79ac842ae461..79ac842ae461 100644
--- a/arch/arm/boot/dts/berlin2cd-valve-steamlink.dts
+++ b/arch/arm/boot/dts/synaptics/berlin2cd-valve-steamlink.dts
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/synaptics/berlin2cd.dtsi
index b2768f7a3185..b2768f7a3185 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/synaptics/berlin2cd.dtsi
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/synaptics/berlin2q-marvell-dmp.dts
index c162f98cb8e8..c162f98cb8e8 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/synaptics/berlin2q-marvell-dmp.dts
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/synaptics/berlin2q.dtsi
index 598a46f96a82..6edaefa617a5 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/synaptics/berlin2q.dtsi
@@ -581,7 +581,7 @@
 				status = "disabled";
 			};
 
-			uart0: uart@9000 {
+			uart0: serial@9000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x9000 0x100>;
 				interrupts = <8>;
@@ -592,7 +592,7 @@
 				status = "disabled";
 			};
 
-			uart1: uart@a000 {
+			uart1: serial@a000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0xa000 0x100>;
 				interrupts = <9>;
diff --git a/arch/arm/boot/dts/tegra114-asus-tf701t.dts b/arch/arm/boot/dts/tegra114-asus-tf701t.dts
deleted file mode 100644
index 284209b0bd96..000000000000
--- a/arch/arm/boot/dts/tegra114-asus-tf701t.dts
+++ /dev/null
@@ -1,807 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-/dts-v1/;
-
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/input.h>
-
-#include "tegra114.dtsi"
-
-/ {
-	model = "Asus Transformer Pad TF701T";
-	compatible = "asus,tf701t", "nvidia,tegra114";
-	chassis-type = "convertible";
-
-	aliases {
-		mmc0 = "/mmc@78000600"; /* eMMC */
-		mmc1 = "/mmc@78000400"; /* uSD slot */
-		mmc2 = "/mmc@78000000"; /* WiFi */
-
-		rtc0 = &palmas;
-		rtc1 = "/rtc@7000e000";
-
-		serial0 = &uartd; /* Console */
-		serial1 = &uartc; /* Bluetooth */
-		serial2 = &uartb; /* GPS */
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x80000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		linux,cma@80000000 {
-			compatible = "shared-dma-pool";
-			alloc-ranges = <0x80000000 0x30000000>;
-			size = <0x10000000>;
-			linux,cma-default;
-			reusable;
-		};
-
-		trustzone@bfe00000 {
-			reg = <0xbfe00000 0x200000>;
-			no-map;
-		};
-	};
-
-	host1x@50000000 {
-		dsi@54300000 {
-			status = "okay";
-
-			avdd-dsi-csi-supply = <&tps65913_ldo2>;
-
-			nvidia,ganged-mode = <&dsib>;
-
-			panel_primary: panel@0 {
-				compatible = "sharp,lq101r1sx01";
-				reg = <0>;
-
-				link2 = <&panel_secondary>;
-
-				power-supply = <&vdd_lcd>;
-				backlight = <&backlight>;
-			};
-		};
-
-		dsi@54400000 {
-			status = "okay";
-
-			avdd-dsi-csi-supply = <&tps65913_ldo2>;
-
-			panel_secondary: panel@0 {
-				compatible = "sharp,lq101r1sx01";
-				reg = <0>;
-			};
-		};
-	};
-
-	pinmux@70000868 {
-		asus_pad_ec_default: asus-pad-ec-default {
-			ec-interrupt {
-				nvidia,pins = "kb_col5_pq5";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			ec-request {
-				nvidia,pins = "kb_col2_pq2";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-		};
-
-		backlight_default: backlight-default {
-			backlight-enable {
-				nvidia,pins = "gmi_ad10_ph2";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-		};
-
-		codec_default: codec-default {
-			ldo1-en {
-				nvidia,pins = "sdmmc1_wp_n_pv3";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-
-			interrupt {
-				nvidia,pins = "gpio_w2_aud_pw2",
-						"gpio_w3_aud_pw3";
-				nvidia,function = "spi6";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-		};
-
-		gpio_keys_default: gpio-keys-default {
-			power {
-				nvidia,pins = "kb_col0_pq0";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			volume {
-				nvidia,pins = "kb_row1_pr1",
-						"kb_row2_pr2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-		};
-
-		gpio_hall_sensor_default: gpio-hall-sensor-default {
-			ulpi_data4_po5 {
-				nvidia,pins = "ulpi_data4_po5";
-				nvidia,function = "spi2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-		};
-
-		hp_det_default: hp-det-default {
-			gmi_iordy_pi5 {
-				nvidia,pins = "kb_row7_pr7";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-		};
-
-		imu_default: imu-default {
-			kb_row3_pr3 {
-				nvidia,pins = "kb_row3_pr3";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-		};
-
-		pwm_default: pwm-default {
-			gmi_ad9_ph1 {
-				nvidia,pins = "gmi_ad9_ph1";
-				nvidia,function = "pwm1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-		};
-
-		/* XXX make this something more sensible */
-		pwm_sleep: pwm-sleep {
-			gmi_ad9_ph1 {
-				nvidia,pins = "gmi_ad9_ph1";
-				nvidia,function = "pwm1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-		};
-
-		sdmmc3_default: sdmmc3-default {
-			sdmmc3_clk_pa6 {
-				nvidia,pins = "sdmmc3_clk_pa6";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			sdmmc3_cmd_pa7 {
-				nvidia,pins = "sdmmc3_cmd_pa7",
-						"sdmmc3_dat0_pb7",
-						"sdmmc3_dat1_pb6",
-						"sdmmc3_dat2_pb5",
-						"sdmmc3_dat3_pb4",
-						"kb_col4_pq4",
-						"sdmmc3_clk_lb_out_pee4",
-						"sdmmc3_clk_lb_in_pee5",
-						"sdmmc3_cd_n_pv2";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			drive_sdio3 {
-				nvidia,pins = "drive_sdio3";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <22>;
-				nvidia,pull-up-strength = <36>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-			};
-		};
-
-		sdmmc3_vdd_default: sdmmc3-vdd-default {
-			gmi_clk_pk1 {
-				nvidia,pins = "gmi_clk_pk1";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-		};
-
-		vdd_lcd_default: vdd-lcd-default {
-			sdmmc4_clk_pcc4 {
-				nvidia,pins = "sdmmc4_clk_pcc4";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-		};
-	};
-
-	serial@70006040 {
-		/* GPS */
-	};
-
-	serial@70006200 {
-		/* Bluetooth */
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	pwm@7000a000 {
-		status = "okay";
-
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&pwm_default>;
-		pinctrl-1 = <&pwm_sleep>;
-	};
-
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		magnetometer@c {
-			compatible = "asahi-kasei,ak09911";
-			reg = <0xc>;
-
-			vdd-supply = <&vdd_3v3_sys>;
-		};
-
-		rt5639: audio-codec@1c {
-			compatible = "realtek,rt5639";
-			reg = <0x1c>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
-
-			realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&codec_default>;
-		};
-
-		motion-tracker@68 {
-			compatible = "invensense,mpu6500";
-			reg = <0x68>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(R, 3) IRQ_TYPE_LEVEL_HIGH>;
-
-			mount-matrix =  "0", "-1", "0",
-					"1",  "0", "0",
-					"0",  "0", "1";
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&imu_default>;
-		};
-
-		temp_sensor: temperature-sensor@4c {
-			compatible = "onnn,nct1008";
-			reg = <0x4c>;
-
-			vcc-supply = <&vdd_3v3_sys>;
-			#thermal-sensor-cells = <1>;
-		};
-	};
-
-	i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		power-sensor@44 {
-			compatible = "ti,ina230";
-			reg = <0x44>;
-		};
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		light-sensor@1c {
-			compatible = "dynaimage,al3320a";
-			reg = <0x1c>;
-
-			vdd-supply = <&vdd_3v3_sys>;
-		};
-	};
-
-	i2c@7000c700 {
-		/* HDMI DDC */
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		palmas: pmic@58 {
-			compatible = "ti,tps65913", "ti,palmas";
-			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			ti,system-power-controller;
-
-			palmas_gpio: gpio {
-				compatible = "ti,palmas-gpio";
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			pmic {
-				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
-
-				ldo1-in-supply = <&tps65913_smps7>;
-				ldo2-in-supply = <&tps65913_smps7>;
-				ldo4-in-supply = <&tps65913_smps8>;
-				ldo5-in-supply = <&tps65913_smps9>;
-				ldo6-in-supply = <&tps65913_smps9>;
-				ldo7-in-supply = <&tps65913_smps9>;
-				ldo9-in-supply = <&tps65913_smps9>;
-
-				regulators {
-					tps65913_smps123: smps123 {
-						regulator-name = "vdd-cpu";
-						regulator-min-microvolt = <900000>;
-						regulator-max-microvolt = <1350000>;
-						regulator-always-on;
-						regulator-boot-on;
-						ti,roof-floor = <1>;
-						ti,mode-sleep = <3>;
-					};
-
-					tps65913_smps45: smps45 {
-						regulator-name = "vdd-core";
-						regulator-min-microvolt = <900000>;
-						regulator-max-microvolt = <1400000>;
-						regulator-always-on;
-						regulator-boot-on;
-						ti,roof-floor = <3>;
-					};
-
-					smps6 {
-						regulator-name = "va-lcd-hv";
-						regulator-min-microvolt = <1000000>;
-						regulator-max-microvolt = <1000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					tps65913_smps7: smps7 {
-						regulator-name = "vdd-ddr";
-						regulator-min-microvolt = <1350000>;
-						regulator-max-microvolt = <1350000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					tps65913_smps8: smps8 {
-						regulator-name = "vdd-1v8";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					tps65913_smps9: smps9 {
-						regulator-name = "vdd-sd";
-						regulator-min-microvolt = <2900000>;
-						regulator-max-microvolt = <2900000>;
-						regulator-always-on;
-					};
-
-					tps65913_smps10_out1: smps10_out1 {
-						regulator-name = "vd-smps10-out1";
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					tps65913_smps10_out2: smps10_out2 {
-						regulator-name = "vd-smps10-out2";
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					tps65913_ldo1: ldo1 {
-						regulator-name = "vdd-hdmi-pll";
-						regulator-min-microvolt = <1050000>;
-						regulator-max-microvolt = <1050000>;
-						regulator-always-on;
-						ti,roof-floor = <3>;
-					};
-
-					tps65913_ldo2: ldo2 {
-						regulator-name = "vdd-2v8-dsi-csi";
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-						regulator-boot-on;
-					};
-
-					ldo3 {
-						regulator-name = "vpp-fuse";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					ldo4 {
-						regulator-name = "vdd-1v2-cam";
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					ldo5 {
-						regulator-name = "vdd-cam";
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-					};
-
-					ldo6 {
-						regulator-name = "vdd-dev";
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-						regulator-boot-on;
-					};
-
-					ldo7 {
-						regulator-name = "vdd-2v8-cam";
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-					};
-
-					tps65913_ldo8: ldo8 {
-						regulator-name = "vdd-rtc";
-						regulator-min-microvolt = <950000>;
-						regulator-max-microvolt = <950000>;
-						regulator-always-on;
-						regulator-boot-on;
-						ti,enable-ldo8-tracking;
-					};
-
-					tps65913_ldo9: ldo9 {
-						regulator-name = "vdd-sdmmc";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2900000>;
-					};
-
-					tps65913_ldoln: ldoln {
-						regulator-name = "vdd-hdmi";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					ldousb {
-						regulator-name = "vdd-usb";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-				};
-			};
-
-			rtc {
-				compatible = "ti,palmas-rtc";
-				interrupt-parent = <&palmas>;
-				interrupts = <8 0>;
-			};
-
-			pinmux {
-				compatible = "ti,tps65913-pinctrl";
-				ti,palmas-enable-dvfs1;
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&palmas_default>;
-
-				palmas_default: pinmux {
-					pin_powergood {
-						pins = "powergood";
-						function = "powergood";
-					};
-
-					pin_vac {
-						pins = "vac";
-						function = "vac";
-					};
-
-					pin_gpio0 {
-						pins = "gpio0";
-						function = "gpio";
-					};
-
-					pin_gpio1 {
-						pins = "gpio1";
-						function = "gpio";
-					};
-
-					pin_gpio2 {
-						pins = "gpio2";
-						function = "gpio";
-					};
-
-					pin_gpio3 {
-						pins = "gpio3";
-						function = "gpio";
-					};
-
-					pin_gpio4 {
-						pins = "gpio4";
-						function = "gpio";
-					};
-
-					pin_gpio5 {
-						pins = "gpio5";
-						function = "gpio";
-					};
-
-					pin_gpio6 {
-						pins = "gpio6";
-						function = "gpio";
-					};
-
-					pin_gpio7 {
-						pins = "gpio7";
-						function = "gpio";
-					};
-				};
-			};
-		};
-	};
-
-	ahub@70080000 {
-		i2s@70080300 {
-			status = "okay";
-		};
-	};
-
-	mmc@78000000 {
-		/* WiFi */
-	};
-
-	/* MicroSD card */
-	mmc@78000400 {
-		status = "okay";
-
-		bus-width = <4>;
-		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-
-		nvidia,default-tap = <0x3>;
-		nvidia,default-trim = <0x3>;
-
-		vmmc-supply = <&vdd_usd>;
-		vqmmc-supply = <&tps65913_ldo9>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc3_default>;
-	};
-
-	mmc@78000600 {
-		/* eMMC */
-	};
-
-	usb@7d000000 {
-		compatible = "nvidia,tegra114-udc";
-		status = "okay";
-		dr_mode = "peripheral";
-
-		/* Peripheral USB via ASUS connector */
-	};
-
-	usb-phy@7d000000 {
-		status = "okay";
-	};
-
-	usb@7d008000 {
-		status = "okay";
-
-		/* Host USB via dock */
-	};
-
-	usb-phy@7d008000 {
-		status = "okay";
-		vbus-supply = <&vdd_5v0_sys>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_5v0_sys>;
-		pwms = <&pwm 1 1000000>;
-
-		brightness-levels = <1 255>;
-		num-interpolated-steps = <254>;
-		default-brightness-level = <224>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight_default>;
-	};
-
-	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
-	clk32k_in: clock-32k {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "pmic-oscillator";
-	};
-
-	firmware {
-		trusted-foundations {
-			compatible = "tlm,trusted-foundations";
-			tlm,version-major = <2>;
-			tlm,version-minor = <8>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		label = "GPIO Buttons";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_default>;
-
-		button-power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-
-		button-volume-up {
-			label = "Volume Up";
-			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <10>;
-		};
-
-		button-volume-down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <10>;
-		};
-	};
-
-	gpio-hall-sensor {
-		compatible = "gpio-keys";
-
-		label = "GPIO Hall Effect Sensor";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_hall_sensor_default>;
-
-		switch-hall-sensor {
-			label = "Hall Effect Sensor";
-			gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LID>;
-			linux,can-disable;
-			wakeup-source;
-		};
-	};
-
-	sound {
-		compatible = "asus,tegra-audio-rt5639-tf701t",
-			     "nvidia,tegra-audio-rt5640";
-		nvidia,model = "Asus Transformer Pad TF701T RT5639";
-
-		nvidia,audio-routing =
-			"Headphones", "HPOR",
-			"Headphones", "HPOL",
-			"Speakers", "SPORP",
-			"Speakers", "SPORN",
-			"Speakers", "SPOLP",
-			"Speakers", "SPOLN",
-			"Mic Jack", "MICBIAS1",
-			"IN2P", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s0>;
-		nvidia,audio-codec = <&rt5639>;
-
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>;
-
-		clocks = <&tegra_car TEGRA114_CLK_PLL_A>,
-			 <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
-			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-
-		assigned-clocks = <&tegra_car TEGRA114_CLK_EXTERN1>,
-				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
-
-		assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
-					 <&tegra_car TEGRA114_CLK_EXTERN1>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&hp_det_default>;
-	};
-
-	vdd_5v0_sys: regulator-5v0-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vdd_3v3_sys: regulator-3v3-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vdd_lcd: regulator-vdd-lcd {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_lcd_1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&tps65913_smps8>;
-		enable-active-high;
-		gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
-		regulator-boot-on;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&vdd_lcd_default>;
-	};
-
-	vdd_usd: regulator-vdd-usd {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_sd_slot";
-		regulator-min-microvolt = <2900000>;
-		regulator-max-microvolt = <2900000>;
-		vin-supply = <&tps65913_smps9>;
-		enable-active-high;
-		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc3_vdd_default>;
-	};
-};
diff --git a/arch/arm/boot/dts/tegra20-asus-tf101.dts b/arch/arm/boot/dts/tegra20-asus-tf101.dts
deleted file mode 100644
index bf797a1f27ea..000000000000
--- a/arch/arm/boot/dts/tegra20-asus-tf101.dts
+++ /dev/null
@@ -1,1290 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/input/atmel-maxtouch.h>
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
-
-#include "tegra20.dtsi"
-#include "tegra20-cpu-opp.dtsi"
-#include "tegra20-cpu-opp-microvolt.dtsi"
-
-/ {
-	model = "ASUS EeePad Transformer TF101";
-	compatible = "asus,tf101", "nvidia,tegra20";
-	chassis-type = "convertible";
-
-	aliases {
-		mmc0 = &sdmmc4; /* eMMC */
-		mmc1 = &sdmmc3; /* MicroSD */
-		mmc2 = &sdmmc1; /* WiFi */
-
-		rtc0 = &pmic;
-		rtc1 = "/rtc@7000e000";
-
-		serial0 = &uartd;
-		serial1 = &uartc; /* Bluetooth */
-		serial2 = &uartb; /* GPS */
-	};
-
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	memory@0 {
-		reg = <0x00000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		ramoops@2ffe0000 {
-			compatible = "ramoops";
-			reg = <0x2ffe0000 0x10000>;	/* 64kB */
-			console-size = <0x8000>;	/* 32kB */
-			record-size = <0x400>;		/*  1kB */
-			ecc-size = <16>;
-		};
-
-		linux,cma@30000000 {
-			compatible = "shared-dma-pool";
-			alloc-ranges = <0x30000000 0x10000000>;
-			size = <0x10000000>; /* 256MiB */
-			linux,cma-default;
-			reusable;
-		};
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-
-				port@0 {
-					lcd_output: endpoint {
-						remote-endpoint = <&lvds_encoder_input>;
-						bus-width = <18>;
-					};
-				};
-			};
-		};
-
-		hdmi@54280000 {
-			status = "okay";
-
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-			hdmi-supply = <&vdd_hdmi_en>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio@6000d000 {
-		charging-enable-hog {
-			gpio-hog;
-			gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
-			output-low;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			ata {
-				nvidia,pins = "ata";
-				nvidia,function = "ide";
-			};
-
-			atb {
-				nvidia,pins = "atb", "gma", "gme";
-				nvidia,function = "sdio4";
-			};
-
-			atc {
-				nvidia,pins = "atc";
-				nvidia,function = "nand";
-			};
-
-			atd {
-				nvidia,pins = "atd", "ate", "gmb", "spia",
-					"spib", "spic";
-				nvidia,function = "gmi";
-			};
-
-			cdev1 {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-			};
-
-			cdev2 {
-				nvidia,pins = "cdev2";
-				nvidia,function = "pllp_out4";
-			};
-
-			crtp {
-				nvidia,pins = "crtp";
-				nvidia,function = "crt";
-			};
-
-			lm1 {
-				nvidia,pins = "lm1";
-				nvidia,function = "rsvd3";
-			};
-
-			csus {
-				nvidia,pins = "csus";
-				nvidia,function = "vi_sensor_clk";
-			};
-
-			dap1 {
-				nvidia,pins = "dap1";
-				nvidia,function = "dap1";
-			};
-
-			dap2 {
-				nvidia,pins = "dap2";
-				nvidia,function = "dap2";
-			};
-
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-			};
-
-			dap4 {
-				nvidia,pins = "dap4";
-				nvidia,function = "dap4";
-			};
-
-			dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
-				nvidia,function = "vi";
-			};
-
-			dtf {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-			};
-
-			gmc {
-				nvidia,pins = "gmc";
-				nvidia,function = "uartd";
-			};
-
-			gmd {
-				nvidia,pins = "gmd";
-				nvidia,function = "sflash";
-			};
-
-			gpu {
-				nvidia,pins = "gpu";
-				nvidia,function = "pwm";
-			};
-
-			gpu7 {
-				nvidia,pins = "gpu7";
-				nvidia,function = "rtck";
-			};
-
-			gpv {
-				nvidia,pins = "gpv", "slxa";
-				nvidia,function = "pcie";
-			};
-
-			hdint {
-				nvidia,pins = "hdint";
-				nvidia,function = "hdmi";
-			};
-
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-			};
-
-			irrx {
-				nvidia,pins = "irrx", "irtx";
-				nvidia,function = "uartb";
-			};
-
-			kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf";
-				nvidia,function = "kbc";
-			};
-
-			lcsn {
-				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
-					"lsdi", "lvp0";
-				nvidia,function = "rsvd4";
-			};
-
-			ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lpp", "lpw0",
-					"lpw2", "lsc0", "lsc1", "lsck", "lsda",
-					"lspi", "lvp1", "lvs";
-				nvidia,function = "displaya";
-			};
-
-			owc {
-				nvidia,pins = "owc", "spdi", "spdo", "uac";
-				nvidia,function = "rsvd2";
-			};
-
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-			};
-
-			rm {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-			};
-
-			sdb {
-				nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk";
-				nvidia,function = "sdio3";
-			};
-
-			sdio1 {
-				nvidia,pins = "sdio1";
-				nvidia,function = "sdio1";
-			};
-
-			slxd {
-				nvidia,pins = "slxd";
-				nvidia,function = "spdif";
-			};
-
-			spid {
-				nvidia,pins = "spid", "spie", "spif";
-				nvidia,function = "spi1";
-			};
-
-			spig {
-				nvidia,pins = "spig", "spih";
-				nvidia,function = "spi2_alt";
-			};
-
-			uaa {
-				nvidia,pins = "uaa", "uab", "uda";
-				nvidia,function = "ulpi";
-			};
-
-			uad {
-				nvidia,pins = "uad";
-				nvidia,function = "irda";
-			};
-
-			uca {
-				nvidia,pins = "uca", "ucb";
-				nvidia,function = "uartc";
-			};
-
-			conf_ata {
-				nvidia,pins = "ata", "atb", "atc", "atd",
-					"cdev1", "cdev2", "dap1", "dap4",
-					"dte", "ddc", "dtf", "gma", "gmc",
-					"gme", "gpu", "gpu7", "gpv", "i2cp",
-					"irrx", "irtx", "pta", "rm", "sdc",
-					"sdd", "slxc", "slxd", "slxk", "spdi",
-					"spdo", "uac", "uad",
-					"uda", "csus";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			conf_ate {
-				nvidia,pins = "ate", "dap2", "dap3", "gmb", "gmd",
-					"owc", "spia", "spib", "spic",
-					"spid", "spie", "spig", "slxa";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-
-			conf_ck32 {
-				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
-					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-			};
-
-			conf_crtp {
-				nvidia,pins = "crtp", "spih";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-
-			conf_dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			conf_spif {
-				nvidia,pins = "spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-
-			conf_hdint {
-				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
-					"lpw1", "lsck", "lsda", "lsdi", "lvp0";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-
-			conf_kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf", "sdio1", "uaa", "uab",
-					"uca", "ucb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			conf_lc {
-				nvidia,pins = "lc", "ls";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-
-			conf_ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lm0", "lpp",
-					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
-					"lvp1", "lvs", "pmc", "sdb";
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			conf_ld17_0 {
-				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
-					"ld23_22";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-			};
-
-			drive_sdio1 {
-				nvidia,pins = "drive_sdio1", "drive_ddc", "drive_vi1";
-				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
-				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
-				nvidia,pull-down-strength = <31>;
-				nvidia,pull-up-strength = <31>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-			};
-
-			drive_csus {
-				nvidia,pins = "drive_csus";
-				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
-				nvidia,pull-down-strength = <31>;
-				nvidia,pull-up-strength = <31>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-			};
-		};
-
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
-
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-			};
-		};
-
-		state_i2cmux_pta: pinmux_i2cmux_pta {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "rsvd4";
-			};
-
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
-			};
-		};
-
-		state_i2cmux_idle: pinmux_i2cmux_idle {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "rsvd4";
-			};
-
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-			};
-		};
-	};
-
-	spdif@70002400 {
-		status = "okay";
-
-		nvidia,fixed-parent-rate;
-	};
-
-	i2s@70002800 {
-		status = "okay";
-
-		nvidia,fixed-parent-rate;
-	};
-
-	serial@70006040 {
-		compatible = "nvidia,tegra20-hsuart";
-		/delete-property/ reg-shift;
-		/* GPS BCM4751 */
-	};
-
-	serial@70006200 {
-		compatible = "nvidia,tegra20-hsuart";
-		/delete-property/ reg-shift;
-		status = "okay";
-
-		/* Azurewave AW-NH615 BCM4329B1 */
-		bluetooth {
-			compatible = "brcm,bcm4329-bt";
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "host-wakeup";
-
-			/* PLLP 216MHz / 16 / 4 */
-			max-speed = <3375000>;
-
-			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
-			clock-names = "txco";
-
-			vbat-supply  = <&vdd_3v3_sys>;
-			vddio-supply = <&vdd_1v8_sys>;
-
-			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
-			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	pwm@7000a000 {
-		status = "okay";
-	};
-
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		/* Aichi AMI306 digital compass */
-		magnetometer@e {
-			compatible = "asahi-kasei,ak8974";
-			reg = <0xe>;
-
-			avdd-supply = <&vdd_3v3_sys>;
-			dvdd-supply = <&vdd_1v8_sys>;
-
-			mount-matrix = "-1",  "0",  "0",
-					"0",  "1",  "0",
-					"0",  "0", "-1";
-		};
-
-		wm8903: audio-codec@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_BOTH>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0x83>;
-			micdet-delay = <100>;
-
-			gpio-cfg = <
-				0xffffffff /* don't touch */
-				0xffffffff /* don't touch */
-				0x00000000 /* Speaker-enable GPIO, output, low */
-				0x00000400 /* Mic bias current detect */
-				0xffffffff /* don't touch */
-			>;
-
-			AVDD-supply  = <&vdd_1v8_sys>;
-			CPVDD-supply = <&vdd_1v8_sys>;
-			DBVDD-supply = <&vdd_1v8_sys>;
-			DCVDD-supply = <&vdd_1v8_sys>;
-		};
-
-		/* Atmel MXT1386 Touchscreen */
-		touchscreen@5b {
-			compatible = "atmel,maxtouch";
-			reg = <0x5b>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>;
-
-			reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
-
-			vdda-supply = <&vdd_3v3_sys>;
-			vdd-supply  = <&vdd_3v3_sys>;
-
-			atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
-		};
-
-		gyroscope@68 {
-			compatible = "invensense,mpu3050";
-			reg = <0x68>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_EDGE_RISING>;
-
-			vdd-supply    = <&vdd_3v3_sys>;
-			vlogic-supply = <&vdd_1v8_sys>;
-
-			mount-matrix =	 "0",  "1",  "0",
-					"-1",  "0",  "0",
-					 "0",  "0",  "1";
-
-			i2c-gate {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				accelerometer@f {
-					compatible = "kionix,kxtf9";
-					reg = <0xf>;
-
-					interrupt-parent = <&gpio>;
-					interrupts = <TEGRA_GPIO(N, 4) IRQ_TYPE_EDGE_RISING>;
-
-					vdd-supply = <&vdd_1v8_sys>;
-					vddio-supply = <&vdd_1v8_sys>;
-
-					mount-matrix =	 "1",  "0",  "0",
-							 "0",  "1",  "0",
-							 "0",  "0",  "1";
-				};
-			};
-		};
-	};
-
-	i2c2: i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		pmic: pmic@34 {
-			compatible = "ti,tps6586x";
-			reg = <0x34>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			sys-supply = <&vdd_5v0_sys>;
-			vin-sm0-supply = <&sys_reg>;
-			vin-sm1-supply = <&sys_reg>;
-			vin-sm2-supply = <&sys_reg>;
-			vinldo01-supply = <&sm2_reg>;
-			vinldo23-supply = <&sm2_reg>;
-			vinldo4-supply = <&sm2_reg>;
-			vinldo678-supply = <&sm2_reg>;
-			vinldo9-supply = <&sm2_reg>;
-
-			regulators {
-				sys_reg: sys {
-					regulator-name = "vdd_sys";
-					regulator-always-on;
-				};
-
-				vdd_core: sm0 {
-					regulator-name = "vdd_sm0,vdd_core";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
-					regulator-coupled-max-spread = <170000 550000>;
-					regulator-always-on;
-					regulator-boot-on;
-
-					nvidia,tegra-core-regulator;
-				};
-
-				vdd_cpu: sm1 {
-					regulator-name = "vdd_sm1,vdd_cpu";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1125000>;
-					regulator-coupled-with = <&vdd_core &rtc_vdd>;
-					regulator-coupled-max-spread = <550000 550000>;
-					regulator-always-on;
-					regulator-boot-on;
-
-					nvidia,tegra-cpu-regulator;
-				};
-
-				sm2_reg: sm2 {
-					regulator-name = "vdd_sm2,vin_ldo*";
-					regulator-min-microvolt = <3700000>;
-					regulator-max-microvolt = <3700000>;
-					regulator-always-on;
-				};
-
-				/* LDO0 is not connected to anything */
-
-				ldo1 {
-					regulator-name = "vdd_ldo1,avdd_pll*";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				rtc_vdd: ldo2 {
-					regulator-name = "vdd_ldo2,vdd_rtc";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-coupled-with = <&vdd_core &vdd_cpu>;
-					regulator-coupled-max-spread = <170000 550000>;
-					regulator-always-on;
-					regulator-boot-on;
-
-					nvidia,tegra-rtc-regulator;
-				};
-
-				ldo3 {
-					regulator-name = "vdd_ldo3,avdd_usb*";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo4 {
-					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				vcore_emmc: ldo5 {
-					regulator-name = "vdd_ldo5,vcore_mmc";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo6 {
-					regulator-name = "vdd_ldo6,avdd_vdac";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				hdmi_vdd_reg: ldo7 {
-					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				hdmi_pll_reg: ldo8 {
-					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo9 {
-					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo_rtc {
-					regulator-name = "vdd_rtc_out,vdd_cell";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		nct1008: temperature-sensor@4c {
-			compatible = "onnn,nct1008";
-			reg = <0x4c>;
-			vcc-supply = <&vdd_3v3_sys>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
-
-			#thermal-sensor-cells = <1>;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <2000>;
-		nvidia,cpu-pwr-off-time = <100>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <458>;
-		nvidia,sys-clock-req-active-high;
-		core-supply = <&vdd_core>;
-	};
-
-	memory-controller@7000f400 {
-		nvidia,use-ram-code;
-
-		emc-tables@3 {
-			reg = <0x3>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			lpddr2 {
-				compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
-				revision-id = <1 0>;
-				density = <2048>;
-				io-width = <16>;
-			};
-
-			emc-table@25000 {
-				reg = <25000>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <25000>;
-				nvidia,emc-registers = <0x00000002 0x00000006
-					0x00000003 0x00000003 0x00000006 0x00000004
-					0x00000002 0x00000009 0x00000003 0x00000003
-					0x00000002 0x00000002 0x00000002 0x00000004
-					0x00000003 0x00000008 0x0000000b 0x0000004d
-					0x00000000 0x00000003 0x00000003 0x00000003
-					0x00000008 0x00000001 0x0000000a 0x00000004
-					0x00000003 0x00000008 0x00000004 0x00000006
-					0x00000002 0x00000068 0x00000000 0x00000003
-					0x00000000 0x00000000 0x00000282 0xa0ae04ae
-					0x00070000 0x00000000 0x00000000 0x00000003
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-
-			emc-table@50000 {
-				reg = <50000>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <50000>;
-				nvidia,emc-registers = <0x00000003 0x00000007
-					0x00000003 0x00000003 0x00000006 0x00000004
-					0x00000002 0x00000009 0x00000003 0x00000003
-					0x00000002 0x00000002 0x00000002 0x00000005
-					0x00000003 0x00000008 0x0000000b 0x0000009f
-					0x00000000 0x00000003 0x00000003 0x00000003
-					0x00000008 0x00000001 0x0000000a 0x00000007
-					0x00000003 0x00000008 0x00000004 0x00000006
-					0x00000002 0x000000d0 0x00000000 0x00000000
-					0x00000000 0x00000000 0x00000282 0xa0ae04ae
-					0x00070000 0x00000000 0x00000000 0x00000005
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-
-			emc-table@75000 {
-				reg = <75000>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <75000>;
-				nvidia,emc-registers = <0x00000005 0x0000000a
-					0x00000004 0x00000003 0x00000006 0x00000004
-					0x00000002 0x00000009 0x00000003 0x00000003
-					0x00000002 0x00000002 0x00000002 0x00000005
-					0x00000003 0x00000008 0x0000000b 0x000000ff
-					0x00000000 0x00000003 0x00000003 0x00000003
-					0x00000008 0x00000001 0x0000000a 0x0000000b
-					0x00000003 0x00000008 0x00000004 0x00000006
-					0x00000002 0x00000138 0x00000000 0x00000000
-					0x00000000 0x00000000 0x00000282 0xa0ae04ae
-					0x00070000 0x00000000 0x00000000 0x00000007
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-
-			emc-table@150000 {
-				reg = <150000>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <150000>;
-				nvidia,emc-registers = <0x00000009 0x00000014
-					0x00000007 0x00000003 0x00000006 0x00000004
-					0x00000002 0x00000009 0x00000003 0x00000003
-					0x00000002 0x00000002 0x00000002 0x00000005
-					0x00000003 0x00000008 0x0000000b 0x0000021f
-					0x00000000 0x00000003 0x00000003 0x00000003
-					0x00000008 0x00000001 0x0000000a 0x00000015
-					0x00000003 0x00000008 0x00000004 0x00000006
-					0x00000002 0x00000270 0x00000000 0x00000001
-					0x00000000 0x00000000 0x00000282 0xa07c04ae
-					0x007dc010 0x00000000 0x00000000 0x0000000e
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-
-			emc-table@300000 {
-				reg = <300000>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <300000>;
-				nvidia,emc-registers = <0x00000012 0x00000027
-					0x0000000d 0x00000006 0x00000007 0x00000005
-					0x00000003 0x00000009 0x00000006 0x00000006
-					0x00000003 0x00000003 0x00000002 0x00000006
-					0x00000003 0x00000009 0x0000000c 0x0000045f
-					0x00000000 0x00000004 0x00000004 0x00000006
-					0x00000008 0x00000001 0x0000000e 0x0000002a
-					0x00000003 0x0000000f 0x00000007 0x00000005
-					0x00000002 0x000004e0 0x00000005 0x00000002
-					0x00000000 0x00000000 0x00000282 0xe059048b
-					0x007e0010 0x00000000 0x00000000 0x0000001b
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-		};
-	};
-
-	/* Peripheral USB via ASUS connector */
-	usb@c5000000 {
-		compatible = "nvidia,tegra20-udc";
-		status = "okay";
-		dr_mode = "peripheral";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-		dr_mode = "peripheral";
-		nvidia,xcvr-setup-use-fuses;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-		vbus-supply = <&vdd_5v0_sys>;
-	};
-
-	/* Dock's USB port */
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-		nvidia,xcvr-setup-use-fuses;
-		vbus-supply = <&vdd_5v0_sys>;
-	};
-
-	sdmmc1: mmc@c8000000 {
-		status = "okay";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
-		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
-		assigned-clock-rates = <40000000>;
-
-		max-frequency = <40000000>;
-		keep-power-in-suspend;
-		bus-width = <4>;
-		non-removable;
-
-		mmc-pwrseq = <&brcm_wifi_pwrseq>;
-		vmmc-supply = <&vdd_3v3_sys>;
-		vqmmc-supply = <&vdd_3v3_sys>;
-
-		/* Azurewave AW-NH615 BCM4329B1 */
-		wifi@1 {
-			compatible = "brcm,bcm4329-fmac";
-			reg = <1>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "host-wake";
-		};
-	};
-
-	sdmmc3: mmc@c8000400 {
-		status = "okay";
-		bus-width = <4>;
-		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
-		vmmc-supply = <&vdd_3v3_sys>;
-		vqmmc-supply = <&vdd_3v3_sys>;
-	};
-
-	sdmmc4: mmc@c8000600 {
-		status = "okay";
-		bus-width = <8>;
-		vmmc-supply = <&vcore_emmc>;
-		vqmmc-supply = <&vdd_3v3_sys>;
-		non-removable;
-	};
-
-	mains: ac-adapter-detect {
-		compatible = "gpio-charger";
-		charger-type = "mains";
-		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_3v3_sys>;
-		pwms = <&pwm 2 4000000>;
-
-		brightness-levels = <7 255>;
-		num-interpolated-steps = <248>;
-		default-brightness-level = <20>;
-	};
-
-	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
-	clk32k_in: clock-32k-in {
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		#clock-cells = <0>;
-	};
-
-	cpus {
-		cpu0: cpu@0 {
-			cpu-supply = <&vdd_cpu>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-		};
-
-		cpu1: cpu@1 {
-			cpu-supply = <&vdd_cpu>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		switch-dock-hall-sensor {
-			label = "Lid";
-			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LID>;
-			debounce-interval = <500>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
-		key-power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-	};
-
-	display-panel {
-		compatible = "panel-lvds";
-
-		/* AUO B101EW05 using custom timings */
-
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&lvds_ddc>;
-		power-supply = <&vdd_pnl_reg>;
-
-		width-mm = <218>;
-		height-mm = <135>;
-
-		data-mapping = "jeida-18";
-
-		panel-timing {
-			clock-frequency = <71200000>;
-			hactive = <1280>;
-			vactive = <800>;
-			hfront-porch = <8>;
-			hback-porch = <18>;
-			hsync-len = <184>;
-			vsync-len = <3>;
-			vfront-porch = <4>;
-			vback-porch = <8>;
-		};
-
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&lvds_encoder_output>;
-			};
-		};
-	};
-
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&i2c2>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		lvds_ddc: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			smart-battery@b {
-				compatible = "ti,bq20z75", "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,i2c-retry-count = <2>;
-				sbs,poll-retry-count = <10>;
-				power-supplies = <&mains>;
-			};
-		};
-	};
-
-	lvds-encoder {
-		compatible = "ti,sn75lvds83", "lvds-encoder";
-
-		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
-		power-supply = <&vdd_3v3_sys>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				lvds_encoder_input: endpoint {
-					remote-endpoint = <&lcd_output>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				lvds_encoder_output: endpoint {
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-	};
-
-	vdd_5v0_sys: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	vdd_3v3_sys: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_3v3_vs";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	regulator-pcie {
-		compatible = "regulator-fixed";
-		regulator-name = "pcie_vdd";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
-		regulator-always-on;
-	};
-
-	vdd_pnl_reg: regulator-panel {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_pnl";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vdd_1v8_sys: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_1v8_vs";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	vdd_hdmi_en: regulator-hdmi {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v0_hdmi_en";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&vdd_5v0_sys>;
-		gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "asus,tegra-audio-wm8903-tf101",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "Asus EeePad Transformer WM8903";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
-		nvidia,headset;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-
-	thermal-zones {
-		/*
-		 * NCT1008 has two sensors:
-		 *
-		 *	0: internal that monitors ambient/skin temperature
-		 *	1: external that is connected to the CPU's diode
-		 *
-		 * Ideally we should use userspace thermal governor,
-		 * but it's a much more complex solution.  The "skin"
-		 * zone is a simpler solution which prevents TF101 from
-		 * getting too hot from a user's tactile perspective.
-		 * The CPU zone is intended to protect silicon from damage.
-		 */
-
-		skin-thermal {
-			polling-delay-passive = <1000>; /* milliseconds */
-			polling-delay = <5000>; /* milliseconds */
-
-			thermal-sensors = <&nct1008 0>;
-
-			trips {
-				trip0: skin-alert {
-					/* start throttling at 60C */
-					temperature = <60000>;
-					hysteresis = <200>;
-					type = "passive";
-				};
-
-				trip1: skin-crit {
-					/* shut down at 70C */
-					temperature = <70000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&trip0>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-
-		cpu-thermal {
-			polling-delay-passive = <1000>; /* milliseconds */
-			polling-delay = <5000>; /* milliseconds */
-
-			thermal-sensors = <&nct1008 1>;
-
-			trips {
-				trip2: cpu-alert {
-					/* throttle at 85C until temperature drops to 84.8C */
-					temperature = <85000>;
-					hysteresis = <200>;
-					type = "passive";
-				};
-
-				trip3: cpu-crit {
-					/* shut down at 90C */
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map1 {
-					trip = <&trip2>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-	};
-
-	brcm_wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-
-		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
-		clock-names = "ext_clock";
-
-		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
-		post-power-on-delay-ms = <200>;
-		power-off-delay-us = <200>;
-	};
-};
-
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp-666000000;
-	/delete-node/ opp-760000000;
-};
diff --git a/arch/arm/boot/dts/ti/Makefile b/arch/arm/boot/dts/ti/Makefile
new file mode 100644
index 000000000000..871079a7bc3b
--- /dev/null
+++ b/arch/arm/boot/dts/ti/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+subdir-y += davinci
+subdir-y += keystone
+subdir-y += omap
diff --git a/arch/arm/boot/dts/ti/davinci/Makefile b/arch/arm/boot/dts/ti/davinci/Makefile
new file mode 100644
index 000000000000..c0e388eb3dd1
--- /dev/null
+++ b/arch/arm/boot/dts/ti/davinci/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_DAVINCI) += \
+	da850-lcdk.dtb \
+	da850-enbw-cmc.dtb \
+	da850-evm.dtb \
+	da850-lego-ev3.dtb
diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/ti/davinci/da850-enbw-cmc.dts
index d4a5237cee0a..d4a5237cee0a 100644
--- a/arch/arm/boot/dts/da850-enbw-cmc.dts
+++ b/arch/arm/boot/dts/ti/davinci/da850-enbw-cmc.dts
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/ti/davinci/da850-evm.dts
index 1fdd9a249165..38a191fb0414 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/ti/davinci/da850-evm.dts
@@ -60,12 +60,12 @@
 			sync-edge = <0>;
 			sync-ctrl = <1>;
 			raster-order = <0>;
-			fifo-th = <0>;
+			fifo-th = <1>;
 		};
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 480x272 {
+			timing0: timing-480x272 {
 				clock-frequency = <9000000>;
 				hactive = <480>;
 				vactive = <272>;
@@ -161,7 +161,7 @@
 &pmx_core {
 	status = "okay";
 
-	mcasp0_pins: pinmux_mcasp0_pins {
+	mcasp0_pins: mcasp0-pins {
 		pinctrl-single,bits = <
 			/*
 			 * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
@@ -172,7 +172,7 @@
 			0x04 0x00011000 0x000ff000
 		>;
 	};
-	nand_pins: nand_pins {
+	nand_pins: nand-pins {
 		pinctrl-single,bits = <
 			/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
 			0x1c 0x10110110  0xf0ff0ff0
@@ -333,7 +333,7 @@
 	status = "okay";
 };
 
-/include/ "tps6507x.dtsi"
+/include/ "../../tps6507x.dtsi"
 
 &tps {
 	vdcdc1_2-supply = <&vbat>;
@@ -415,7 +415,7 @@
 &aemif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_pins>;
-	status = "ok";
+	status = "okay";
 	cs3 {
 		#address-cells = <2>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/ti/davinci/da850-lcdk.dts
index e379d6e7ad49..8390d71b000a 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/ti/davinci/da850-lcdk.dts
@@ -199,7 +199,7 @@
 &pmx_core {
 	status = "okay";
 
-	mcasp0_pins: pinmux_mcasp0_pins {
+	mcasp0_pins: mcasp0-pins {
 		pinctrl-single,bits = <
 			/* AHCLKX AFSX ACLKX */
 			0x00 0x00101010 0x00f0f0f0
@@ -208,7 +208,7 @@
 		>;
 	};
 
-	nand_pins: nand_pins {
+	nand_pins: nand-pins {
 		pinctrl-single,bits = <
 			/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[3] */
 			0x1c 0x10110010  0xf0ff00f0
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts
index afd04a423856..173401c58d53 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts
@@ -234,7 +234,7 @@
 &pmx_core {
 	status = "okay";
 
-	ev3_lcd_pins: pinmux_lcd {
+	ev3_lcd_pins: lcd-pins {
 		pinctrl-single,bits = <
 			/* SIMO, CLK */
 			0x14 0x00100100 0x00f00f00
@@ -391,7 +391,7 @@
 	pinctrl-names = "default";
 	cs-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
 
-	display@0{
+	display@0 {
 		compatible = "lego,ev3-lcd";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
@@ -412,14 +412,14 @@
 	status = "okay";
 
 	/* Don't pull down battery voltage adc io channel */
-	batt_volt_en {
+	batt-volt-en-hog {
 		gpio-hog;
 		gpios = <6 GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
 
 	/* Don't impede Bluetooth clock signal */
-	bt_clock_en {
+	bt-clock-en-hog {
 		gpio-hog;
 		gpios = <5 GPIO_ACTIVE_HIGH>;
 		input;
@@ -433,19 +433,19 @@
 	 * anything, but they are present in the source code from LEGO.
 	 */
 
-	bt_pic_en {
+	bt-pic-en-hog {
 		gpio-hog;
 		gpios = <51 GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
 
-	bt_pic_rst {
+	bt-pic-rst-hog {
 		gpio-hog;
 		gpios = <78 GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
 
-	bt_pic_cts {
+	bt-pic-cts-hog {
 		gpio-hog;
 		gpios = <87 GPIO_ACTIVE_HIGH>;
 		input;
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/ti/davinci/da850.dtsi
index e46e4d22db39..1d3fb5397ce3 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/ti/davinci/da850.dtsi
@@ -170,55 +170,55 @@
 				#pinctrl-single,gpio-range-cells = <3>;
 			};
 
-			serial0_rtscts_pins: pinmux_serial0_rtscts_pins {
+			serial0_rtscts_pins: serial0-rtscts-pins {
 				pinctrl-single,bits = <
 					/* UART0_RTS UART0_CTS */
 					0x0c 0x22000000 0xff000000
 				>;
 			};
-			serial0_rxtx_pins: pinmux_serial0_rxtx_pins {
+			serial0_rxtx_pins: serial0-rxtx-pins {
 				pinctrl-single,bits = <
 					/* UART0_TXD UART0_RXD */
 					0x0c 0x00220000 0x00ff0000
 				>;
 			};
-			serial1_rtscts_pins: pinmux_serial1_rtscts_pins {
+			serial1_rtscts_pins: serial1-rtscts-pins {
 				pinctrl-single,bits = <
 					/* UART1_CTS UART1_RTS */
 					0x00 0x00440000 0x00ff0000
 				>;
 			};
-			serial1_rxtx_pins: pinmux_serial1_rxtx_pins {
+			serial1_rxtx_pins: serial1-rxtx-pins {
 				pinctrl-single,bits = <
 					/* UART1_TXD UART1_RXD */
 					0x10 0x22000000 0xff000000
 				>;
 			};
-			serial2_rtscts_pins: pinmux_serial2_rtscts_pins {
+			serial2_rtscts_pins: serial2-rtscts-pins {
 				pinctrl-single,bits = <
 					/* UART2_CTS UART2_RTS */
 					0x00 0x44000000 0xff000000
 				>;
 			};
-			serial2_rxtx_pins: pinmux_serial2_rxtx_pins {
+			serial2_rxtx_pins: serial2-rxtx-pins {
 				pinctrl-single,bits = <
 					/* UART2_TXD UART2_RXD */
 					0x10 0x00220000 0x00ff0000
 				>;
 			};
-			i2c0_pins: pinmux_i2c0_pins {
+			i2c0_pins: i2c0-pins {
 				pinctrl-single,bits = <
 					/* I2C0_SDA,I2C0_SCL */
 					0x10 0x00002200 0x0000ff00
 				>;
 			};
-			i2c1_pins: pinmux_i2c1_pins {
+			i2c1_pins: i2c1-pins {
 				pinctrl-single,bits = <
 					/* I2C1_SDA, I2C1_SCL */
 					0x10 0x00440000 0x00ff0000
 				>;
 			};
-			mmc0_pins: pinmux_mmc_pins {
+			mmc0_pins: mmc-pins {
 				pinctrl-single,bits = <
 					/* MMCSD0_DAT[3] MMCSD0_DAT[2]
 					 * MMCSD0_DAT[1] MMCSD0_DAT[0]
@@ -227,85 +227,85 @@
 					0x28 0x00222222  0x00ffffff
 				>;
 			};
-			ehrpwm0a_pins: pinmux_ehrpwm0a_pins {
+			ehrpwm0a_pins: ehrpwm0a-pins {
 				pinctrl-single,bits = <
 					/* EPWM0A */
 					0xc 0x00000002 0x0000000f
 				>;
 			};
-			ehrpwm0b_pins: pinmux_ehrpwm0b_pins {
+			ehrpwm0b_pins: ehrpwm0b-pins {
 				pinctrl-single,bits = <
 					/* EPWM0B */
 					0xc 0x00000020 0x000000f0
 				>;
 			};
-			ehrpwm1a_pins: pinmux_ehrpwm1a_pins {
+			ehrpwm1a_pins: ehrpwm1a-pins {
 				pinctrl-single,bits = <
 					/* EPWM1A */
 					0x14 0x00000002 0x0000000f
 				>;
 			};
-			ehrpwm1b_pins: pinmux_ehrpwm1b_pins {
+			ehrpwm1b_pins: ehrpwm1b-pins {
 				pinctrl-single,bits = <
 					/* EPWM1B */
 					0x14 0x00000020 0x000000f0
 				>;
 			};
-			ecap0_pins: pinmux_ecap0_pins {
+			ecap0_pins: ecap0-pins {
 				pinctrl-single,bits = <
 					/* ECAP0_APWM0 */
 					0x8 0x20000000 0xf0000000
 				>;
 			};
-			ecap1_pins: pinmux_ecap1_pins {
+			ecap1_pins: ecap1-pins {
 				pinctrl-single,bits = <
 					/* ECAP1_APWM1 */
 					0x4 0x40000000 0xf0000000
 				>;
 			};
-			ecap2_pins: pinmux_ecap2_pins {
+			ecap2_pins: ecap2-pins {
 				pinctrl-single,bits = <
 					/* ECAP2_APWM2 */
 					0x4 0x00000004 0x0000000f
 				>;
 			};
-			spi0_pins: pinmux_spi0_pins {
+			spi0_pins: spi0-pins {
 				pinctrl-single,bits = <
 					/* SIMO, SOMI, CLK */
 					0xc 0x00001101 0x0000ff0f
 				>;
 			};
-			spi0_cs0_pin: pinmux_spi0_cs0 {
+			spi0_cs0_pin: spi0-cs0-pins {
 				pinctrl-single,bits = <
 					/* CS0 */
 					0x10 0x00000010 0x000000f0
 				>;
 			};
-			spi0_cs3_pin: pinmux_spi0_cs3_pin {
+			spi0_cs3_pin: spi0-cs3-pins {
 				pinctrl-single,bits = <
 					/* CS3 */
 					0xc 0x01000000 0x0f000000
 				>;
 			};
-			spi1_pins: pinmux_spi1_pins {
+			spi1_pins: spi1-pins {
 				pinctrl-single,bits = <
 					/* SIMO, SOMI, CLK */
 					0x14 0x00110100 0x00ff0f00
 				>;
 			};
-			spi1_cs0_pin: pinmux_spi1_cs0 {
+			spi1_cs0_pin: spi1-cs0-pins {
 				pinctrl-single,bits = <
 					/* CS0 */
 					0x14 0x00000010 0x000000f0
 				>;
 			};
-			mdio_pins: pinmux_mdio_pins {
+			mdio_pins: mdio-pins {
 				pinctrl-single,bits = <
 					/* MDIO_CLK, MDIO_D */
 					0x10 0x00000088 0x000000ff
 				>;
 			};
-			mii_pins: pinmux_mii_pins {
+			mii_pins: mii-pins {
 				pinctrl-single,bits = <
 					/*
 					 * MII_TXEN, MII_TXCLK, MII_COL
@@ -321,7 +321,7 @@
 					0xc 0x88888888 0xffffffff
 				>;
 			};
-			lcd_pins: pinmux_lcd_pins {
+			lcd_pins: lcd-pins {
 				pinctrl-single,bits = <
 					/*
 					 * LCD_D[2], LCD_D[3], LCD_D[4], LCD_D[5],
@@ -342,7 +342,7 @@
 					0x4c 0x02000022 0x0f0000ff
 				>;
 			};
-			vpif_capture_pins: vpif_capture_pins {
+			vpif_capture_pins: vpif-capture-pins {
 				pinctrl-single,bits = <
 					/* VP_DIN[2..7], VP_CLKIN1, VP_CLKIN0 */
 					0x38 0x11111111 0xffffffff
@@ -352,7 +352,7 @@
 					0x40 0x00000011 0x000000ff
 				>;
 			};
-			vpif_display_pins: vpif_display_pins {
+			vpif_display_pins: vpif-display-pins {
 				pinctrl-single,bits = <
 					/* VP_DOUT[2..7] */
 					0x40 0x11111100 0xffffff00
@@ -421,7 +421,7 @@
 			/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
 			reg = <0x0 0x8000>;
 			reg-names = "edma3_cc";
-			interrupts = <11 12>;
+			interrupts = <11>, <12>;
 			interrupt-names = "edma3_ccint", "edma3_ccerrint";
 			#dma-cells = <2>;
 
@@ -447,7 +447,7 @@
 			/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
 			reg = <0x230000 0x8000>;
 			reg-names = "edma3_cc";
-			interrupts = <93 94>;
+			interrupts = <93>, <94>;
 			interrupt-names = "edma3_ccint", "edma3_ccerrint";
 			#dma-cells = <2>;
 
@@ -494,8 +494,7 @@
 		rtc0: rtc@23000 {
 			compatible = "ti,da830-rtc";
 			reg = <0x23000 0x1000>;
-			interrupts = <19
-				      19>;
+			interrupts = <19>, <19>;
 			clocks = <&pll0_auxclk>;
 			clock-names = "int-clk";
 			status = "disabled";
@@ -537,7 +536,7 @@
 			reg = <0x40000 0x1000>;
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
-			interrupts = <16>;
+			interrupts = <16>, <17>;
 			dmas = <&edma0 16 0>, <&edma0 17 0>;
 			dma-names = "rx", "tx";
 			clocks = <&psc0 5>;
@@ -567,7 +566,7 @@
 			reg = <0x21b000 0x1000>;
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
-			interrupts = <72>;
+			interrupts = <72>, <73>;
 			dmas = <&edma1 28 0>, <&edma1 29 0>;
 			dma-names = "rx", "tx";
 			clocks = <&psc1 18>;
@@ -725,11 +724,7 @@
 			ti,davinci-ctrl-ram-offset = <0>;
 			ti,davinci-ctrl-ram-size = <0x2000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <33
-					34
-					35
-					36
-					>;
+			interrupts = <33>, <34>, <35>,<36>;
 			clocks = <&psc1 5>;
 			power-domains = <&psc1 5>;
 			status = "disabled";
@@ -748,7 +743,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			reg = <0x226000 0x1000>;
-			interrupts = <42 43 44 45 46 47 48 49 50>;
+			interrupts = <42>, <43>, <44>, <45>, <46>, <47>, <48>, <49>, <50>;
 			ti,ngpio = <144>;
 			ti,davinci-gpio-unbanked = <0>;
 			clocks = <&psc1 3>;
diff --git a/arch/arm/boot/dts/ti/keystone/Makefile b/arch/arm/boot/dts/ti/keystone/Makefile
new file mode 100644
index 000000000000..4b18d08fa57c
--- /dev/null
+++ b/arch/arm/boot/dts/ti/keystone/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_KEYSTONE) += \
+	keystone-k2hk-evm.dtb \
+	keystone-k2l-evm.dtb \
+	keystone-k2e-evm.dtb \
+	keystone-k2g-evm.dtb \
+	keystone-k2g-ice.dtb
diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-clocks.dtsi
index 0397c3423d2d..20bab90ee0ba 100644
--- a/arch/arm/boot/dts/keystone-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-clocks.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for Keystone 2 clock tree
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 clocks {
diff --git a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2e-clocks.dtsi
index cf30e007fea3..74720dbf3110 100644
--- a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2e-clocks.dtsi
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Edison SoC specific device tree
  *
- * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 clocks {
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/ti/keystone/keystone-k2e-evm.dts
index 5d6d074011df..58099ce8d449 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2e-evm.dts
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Edison EVM device tree
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
@@ -78,7 +78,7 @@
 };
 
 &i2c0 {
-	dtt@50 {
+	eeprom@50 {
 		compatible = "atmel,24c1024";
 		reg = <0x50>;
 	};
@@ -130,7 +130,7 @@
 
 			partition@180000 {
 				label = "ubifs";
-				reg = <0x180000 0x1FE80000>;
+				reg = <0x180000 0x1fe80000>;
 			};
 		};
 	};
@@ -159,7 +159,7 @@
 };
 
 &mdio {
-	status = "ok";
+	status = "okay";
 	ethphy0: ethernet-phy@0 {
 		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi
index 42cf74db673c..e586350ae4dc 100644
--- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for Keystone 2 Edison Netcp driver
  *
- * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 qmss: qmss@2a40000 {
@@ -36,9 +36,9 @@ qmss: qmss@2a40000 {
 		qpend {
 			qpend-0 {
 				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
+				interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+					      0 43 0xf04 0 44 0xf04 0 45 0xf04
+					      0 46 0xf04 0 47 0xf04>;
 			};
 			qpend-1 {
 				qrange = <528 16>;
@@ -167,7 +167,7 @@ netcp: netcp@24000000 {
 						 <&tsipclka>, <&tsrefclk>,
 						 <&tsipclkb>;
 					ti,mux-tbl = <0x0>, <0x1>, <0x2>,
-						<0x3>, <0x4>, <0x8>, <0xC>;
+						<0x3>, <0x4>, <0x8>, <0xc>;
 					assigned-clocks = <&cpts_refclk_mux>;
 					assigned-clock-parents = <&chipclk12>;
 				};
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2e.dtsi
index 65c32946c522..662aa33cba11 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2e.dtsi
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Edison soc device tree
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/reset/ti-syscon.h>
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts
index 88be868cf71e..bf5f67d70235 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts
@@ -2,14 +2,14 @@
 /*
  * Device Tree Source for K2G EVM
  *
- * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
 #include "keystone-k2g.dtsi"
 
 / {
-	compatible =  "ti,k2g-evm", "ti,k2g", "ti,keystone";
+	compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone";
 	model = "Texas Instruments K2G General Purpose EVM";
 
 	memory@800000000 {
@@ -120,14 +120,14 @@
 };
 
 &k2g_pinctrl {
-	uart0_pins: pinmux_uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
 			K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 
-	mmc0_pins: pinmux_mmc0_pins {
+	mmc0_pins: mmc0-pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x1300) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)	/* mmc0_dat3.mmc0_dat3 */
 			K2G_CORE_IOPAD(0x1304) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)	/* mmc0_dat2.mmc0_dat2 */
@@ -139,7 +139,7 @@
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x10ec) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat7.mmc1_dat7 */
 			K2G_CORE_IOPAD(0x10f0) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat6.mmc1_dat6 */
@@ -154,27 +154,27 @@
 		>;
 	};
 
-	i2c0_pins: pinmux_i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x137c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 			K2G_CORE_IOPAD(0x1380) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c1_scl.i2c1_scl */
 			K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c1_sda.i2c1_sda */
 		>;
 	};
 
-	ecap0_pins: ecap0_pins {
+	ecap0_pins: ecap0-pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4)	/* pr1_mdio_data.ecap0_in_apwm0_out */
 		>;
 	};
 
-	spi1_pins: pinmux_spi1_pins {
+	spi1_pins: spi1-pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x11a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_scs0.spi1_scs0 */
 			K2G_CORE_IOPAD(0x11ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_clk.spi1_clk */
@@ -183,7 +183,7 @@
 		>;
 	};
 
-	qspi_pins: pinmux_qspi_pins {
+	qspi_pins: qspi-pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x1204) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_clk.qspi_clk */
 			K2G_CORE_IOPAD(0x1208) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_rclk.qspi_rclk */
@@ -195,52 +195,52 @@
 		>;
 	};
 
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x11ec) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)      /* uart2_rxd.uart2_rxd */
 			K2G_CORE_IOPAD(0x11f0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)      /* uart2_txd.uart2_txd */
 		>;
 	};
 
-	dcan0_pins: pinmux_dcan0_pins {
+	dcan0_pins: dcan0-pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x11fc) (BUFFER_CLASS_B | PULL_DISABLE  | MUX_MODE0)	/* dcan0tx.dcan0tx */
 			K2G_CORE_IOPAD(0x1200) (BUFFER_CLASS_B | PIN_PULLDOWN  | MUX_MODE0)	/* dcan0rx.dcan0rx */
 		>;
 	};
 
-	dcan1_pins: pinmux_dcan1_pins {
+	dcan1_pins: dcan1-pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x1224) (BUFFER_CLASS_B | PULL_DISABLE  | MUX_MODE1)	/* qspicsn2.dcan1tx */
 			K2G_CORE_IOPAD(0x1228) (BUFFER_CLASS_B | PIN_PULLDOWN  | MUX_MODE1)	/* qspicsn3.dcan1rx */
 		>;
 	};
 
-	emac_pins: pinmux_emac_pins {
+	emac_pins: emac-pins {
 		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x113C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD1.RGMII_RXD1 */
+			K2G_CORE_IOPAD(0x113c) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD1.RGMII_RXD1 */
 			K2G_CORE_IOPAD(0x1138) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD2.RGMII_RXD2 */
 			K2G_CORE_IOPAD(0x1134) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD3.RGMII_RXD3 */
 			K2G_CORE_IOPAD(0x1140) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD0.RGMII_RXD0 */
 			K2G_CORE_IOPAD(0x1178) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD0.RGMII_TXD0 */
 			K2G_CORE_IOPAD(0x1174) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD1.RGMII_TXD1 */
 			K2G_CORE_IOPAD(0x1170) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD2.RGMII_TXD2 */
-			K2G_CORE_IOPAD(0x116C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD3.RGMII_TXD3 */
+			K2G_CORE_IOPAD(0x116c) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD3.RGMII_TXD3 */
 			K2G_CORE_IOPAD(0x1154) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXCLK.RGMII_TXC */
-			K2G_CORE_IOPAD(0x117C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXEN.RGMII_TXCTL */
+			K2G_CORE_IOPAD(0x117c) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXEN.RGMII_TXCTL */
 			K2G_CORE_IOPAD(0x1120) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXCLK.RGMII_RXC */
 			K2G_CORE_IOPAD(0x1144) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXDV.RGMII_RXCTL */
 		>;
 	};
 
-	mdio_pins: pinmux_mdio_pins {
+	mdio_pins: mdio-pins {
 		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x118C) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_CLK.MDIO_CLK */
+			K2G_CORE_IOPAD(0x118c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_CLK.MDIO_CLK */
 			K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_DATA.MDIO_DATA */
 		>;
 	};
 
-	vout_pins: pinmux_vout_pins {
+	vout_pins: vout-pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x1078) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata23.dssdata23 */
 			K2G_CORE_IOPAD(0x107c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata22.dssdata22 */
@@ -274,7 +274,7 @@
 		>;
 	};
 
-	mcasp2_pins: pinmux_mcasp2_pins {
+	mcasp2_pins: mcasp2-pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x1234) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo2.mcasp2_axr2 */
 			K2G_CORE_IOPAD(0x1238) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo3.mcasp2_axr3 */
@@ -424,11 +424,11 @@
 		};
 		partition@4 {
 			label = "QSPI.kernel";
-			reg = <0x001C0000 0x0800000>;
+			reg = <0x001c0000 0x0800000>;
 		};
 		partition@5 {
 			label = "QSPI.file-system";
-			reg = <0x009C0000 0x3640000>;
+			reg = <0x009c0000 0x3640000>;
 		};
 	};
 };
@@ -534,7 +534,7 @@
 &dss {
 	pinctrl-names = "default";
 	pinctrl-0 = <&vout_pins>;
-	status = "ok";
+	status = "okay";
 
 	port {
 		dpi_out: endpoint {
diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/ti/keystone/keystone-k2g-ice.dts
index bd84d7f0f2fe..264e1e0d23c8 100644
--- a/arch/arm/boot/dts/keystone-k2g-ice.dts
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2g-ice.dts
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for K2G Industrial Communication Engine EVM
  *
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
@@ -218,14 +218,14 @@
 };
 
 &k2g_pinctrl {
-	uart0_pins: pinmux_uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
 			K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 
-	qspi_pins: pinmux_qspi_pins {
+	qspi_pins: qspi-pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x1204) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_clk.qspi_clk */
 			K2G_CORE_IOPAD(0x1208) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_rclk.qspi_rclk */
@@ -237,35 +237,35 @@
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x10FC) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
+			K2G_CORE_IOPAD(0x10fc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
 			K2G_CORE_IOPAD(0x1100) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
 			K2G_CORE_IOPAD(0x1104) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
 			K2G_CORE_IOPAD(0x1108) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
-			K2G_CORE_IOPAD(0x110C) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
+			K2G_CORE_IOPAD(0x110c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
 			K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
 			K2G_CORE_IOPAD(0x1114) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* mmc1_sdcd.gpio0_69 */
 			K2G_CORE_IOPAD(0x1118) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_sdwp.mmc1_sdwp */
-			K2G_CORE_IOPAD(0x111C) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_pow.mmc1_pow */
+			K2G_CORE_IOPAD(0x111c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_pow.mmc1_pow */
 		>;
 	};
 
-	i2c0_pins: pinmux_i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x137c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 			K2G_CORE_IOPAD(0x1380) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c1_scl.i2c1_scl */
 			K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c1_sda.i2c1_sda */
 		>;
 	};
 
-	user_leds: pinmux_user_leds {
+	user_leds: user-leds-pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x102c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_ad11.gpio0_11 */
 			K2G_CORE_IOPAD(0x1030) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_ad12.gpio0_12 */
@@ -283,26 +283,26 @@
 		>;
 	};
 
-	emac_pins: pinmux_emac_pins {
+	emac_pins: emac-pins {
 		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x113C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD1.RGMII_RXD1 */
+			K2G_CORE_IOPAD(0x113c) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD1.RGMII_RXD1 */
 			K2G_CORE_IOPAD(0x1138) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD2.RGMII_RXD2 */
 			K2G_CORE_IOPAD(0x1134) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD3.RGMII_RXD3 */
 			K2G_CORE_IOPAD(0x1140) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD0.RGMII_RXD0 */
 			K2G_CORE_IOPAD(0x1178) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD0.RGMII_TXD0 */
 			K2G_CORE_IOPAD(0x1174) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD1.RGMII_TXD1 */
 			K2G_CORE_IOPAD(0x1170) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD2.RGMII_TXD2 */
-			K2G_CORE_IOPAD(0x116C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD3.RGMII_TXD3 */
+			K2G_CORE_IOPAD(0x116c) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD3.RGMII_TXD3 */
 			K2G_CORE_IOPAD(0x1154) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXCLK.RGMII_TXC */
-			K2G_CORE_IOPAD(0x117C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXEN.RGMII_TXCTL */
+			K2G_CORE_IOPAD(0x117c) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXEN.RGMII_TXCTL */
 			K2G_CORE_IOPAD(0x1120) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXCLK.RGMII_RXC */
 			K2G_CORE_IOPAD(0x1144) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXDV.RGMII_RXCTL */
 		>;
 	};
 
-	mdio_pins: pinmux_mdio_pins {
+	mdio_pins: mdio-pins {
 		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x118C) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_CLK.MDIO_CLK */
+			K2G_CORE_IOPAD(0x118c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_CLK.MDIO_CLK */
 			K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_DATA.MDIO_DATA */
 		>;
 	};
diff --git a/arch/arm/boot/dts/keystone-k2g-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi
index f6306933ff42..974c8f2fa740 100644
--- a/arch/arm/boot/dts/keystone-k2g-netcp.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for K2G Netcp driver
  *
- * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 qmss: qmss@4020000 {
@@ -37,9 +37,9 @@ qmss: qmss@4020000 {
 		qpend {
 			qpend-0 {
 				qrange = <77 8>;
-				interrupts =<0 308 0xf04 0 309 0xf04 0 310 0xf04
-					     0 311 0xf04 0 312 0xf04 0 313 0xf04
-					     0 314 0xf04 0 315 0xf04>;
+				interrupts = <0 308 0xf04 0 309 0xf04 0 310 0xf04
+					      0 311 0xf04 0 312 0xf04 0 313 0xf04
+					      0 314 0xf04 0 315 0xf04>;
 				qalloc-by-id;
 			};
 		};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2g.dtsi
index 380dd9d637ee..dafe485dfe19 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2g.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for K2G SOC
  *
- * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -177,7 +177,7 @@
 
 		dcan0: can@260b200 {
 			compatible = "ti,am4372-d_can", "ti,am3352-d_can";
-			reg = <0x0260B200 0x200>;
+			reg = <0x0260b200 0x200>;
 			interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
 			status = "disabled";
 			power-domains = <&k2g_pds 0x0008>;
@@ -186,7 +186,7 @@
 
 		dcan1: can@260b400 {
 			compatible = "ti,am4372-d_can", "ti,am3352-d_can";
-			reg = <0x0260B400 0x200>;
+			reg = <0x0260b400 0x200>;
 			interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
 			status = "disabled";
 			power-domains = <&k2g_pds 0x0009>;
@@ -256,11 +256,6 @@
 
 		pmmc: system-controller@2921c00 {
 			compatible = "ti,k2g-sci";
-			/*
-			 * In case of rare platforms that does not use k2g as
-			 * system master, use /delete-property/
-			 */
-			ti,system-reboot-controller;
 			mbox-names = "rx", "tx";
 			mboxes = <&msgmgr 5 2>,
 				<&msgmgr 0 0>;
@@ -593,7 +588,7 @@
 
 		spi2: spi@21805c00 {
 			compatible = "ti,keystone-spi";
-			reg = <0x21805C00 0x200>;
+			reg = <0x21805c00 0x200>;
 			num-cs = <4>;
 			ti,davinci-spi-intr-line = <0>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-clocks.dtsi
index 4ba6912176ef..3ca4722087c9 100644
--- a/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-clocks.dtsi
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Kepler/Hawking SoC clock nodes
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 clocks {
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts
index 4a91f5ded402..b824fad9a4ec 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Kepler/Hawking EVM device tree
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
@@ -10,7 +10,7 @@
 #include "keystone-k2hk.dtsi"
 
 / {
-	compatible =  "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
+	compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
 	model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
 
 	reserved-memory {
@@ -28,22 +28,22 @@
 
 	leds {
 		compatible = "gpio-leds";
-		debug1_1 {
+		led-debug-1-1 {
 			label = "keystone:green:debug1";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
 		};
 
-		debug1_2 {
+		led-debug-1-2 {
 			label = "keystone:red:debug1";
 			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
 		};
 
-		debug2 {
+		led-debug-2 {
 			label = "keystone:blue:debug2";
 			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
 		};
 
-		debug3 {
+		led-debug-3 {
 			label = "keystone:blue:debug3";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
 		};
@@ -154,7 +154,7 @@
 };
 
 &i2c0 {
-	dtt@50 {
+	eeprom@50 {
 		compatible = "atmel,24c1024";
 		reg = <0x50>;
 	};
@@ -183,7 +183,7 @@
 };
 
 &mdio {
-	status = "ok";
+	status = "okay";
 	ethphy0: ethernet-phy@0 {
 		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi
index 8a421c65f920..3ab1b5d6f9bc 100644
--- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for Keystone 2 Hawking Netcp driver
  *
- * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 qmss: qmss@2a40000 {
@@ -49,9 +49,9 @@ qmss: qmss@2a40000 {
 		qpend {
 			qpend-0 {
 				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
+				interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+					      0 43 0xf04 0 44 0xf04 0 45 0xf04
+					      0 46 0xf04 0 47 0xf04>;
 			};
 			qpend-1 {
 				qrange = <8704 16>;
diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2hk.dtsi
index da6d3934c2e8..4fdf4b30384f 100644
--- a/arch/arm/boot/dts/keystone-k2hk.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2hk.dtsi
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Kepler/Hawking soc specific device tree
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/reset/ti-syscon.h>
diff --git a/arch/arm/boot/dts/keystone-k2l-clocks.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2l-clocks.dtsi
index 635528064dea..fcfc2fb6cc2d 100644
--- a/arch/arm/boot/dts/keystone-k2l-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2l-clocks.dtsi
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 lamarr SoC clock nodes
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 clocks {
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/ti/keystone/keystone-k2l-evm.dts
index 1c880cf8fa91..ccda63ab12fe 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2l-evm.dts
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Lamarr EVM device tree
  *
- * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
@@ -51,7 +51,7 @@
 };
 
 &i2c0 {
-	dtt@50 {
+	eeprom@50 {
 		compatible = "atmel,24c1024";
 		reg = <0x50>;
 	};
@@ -103,7 +103,7 @@
 
 			partition@180000 {
 				label = "ubifs";
-				reg = <0x180000 0x7FE80000>;
+				reg = <0x180000 0x7fe80000>;
 			};
 		};
 	};
@@ -132,7 +132,7 @@
 };
 
 &mdio {
-	status = "ok";
+	status = "okay";
 	ethphy0: ethernet-phy@0 {
 		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi
index 5ec6680a533d..b8f880faaa31 100644
--- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for Keystone 2 Lamarr Netcp driver
  *
- * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 qmss: qmss@2a40000 {
@@ -36,9 +36,9 @@ qmss: qmss@2a40000 {
 		qpend {
 			qpend-0 {
 				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
+				interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04
+					      0 43 0xf04 0 44 0xf04 0 45 0xf04
+					      0 46 0xf04 0 47 0xf04>;
 			};
 			qpend-1 {
 				qrange = <528 16>;
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2l.dtsi
index 421a02bbc9d3..330b437b667f 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2l.dtsi
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Lamarr SoC specific device tree
  *
- * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/reset/ti-syscon.h>
@@ -116,42 +116,42 @@
 			pinctrl-single,function-mask = <0x1>;
 			status = "disabled";
 
-			uart3_emifa_pins: pinmux_uart3_emifa_pins {
+			uart3_emifa_pins: uart3-emifa-pins {
 				pinctrl-single,bits = <
 					/* UART3_EMIFA_SEL */
 					0x0 0x0  0xc0
 				>;
 			};
 
-			uart2_emifa_pins: pinmux_uart2_emifa_pins {
+			uart2_emifa_pins: uart2-emifa-pins {
 			pinctrl-single,bits = <
 					/* UART2_EMIFA_SEL */
 					0x0 0x0  0x30
 				>;
 			};
 
-			uart01_spi2_pins: pinmux_uart01_spi2_pins {
+			uart01_spi2_pins: uart01-spi2-pins {
 				pinctrl-single,bits = <
 					/* UART01_SPI2_SEL */
 					0x0 0x0 0x4
 				>;
 			};
 
-			dfesync_rp1_pins: pinmux_dfesync_rp1_pins{
+			dfesync_rp1_pins: dfesync-rp1-pins {
 				pinctrl-single,bits = <
 					/* DFESYNC_RP1_SEL */
 					0x0 0x0 0x2
 				>;
 			};
 
-			avsif_pins: pinmux_avsif_pins {
+			avsif_pins: avsif-pins {
 				pinctrl-single,bits = <
 					/* AVSIF_SEL */
 					0x0 0x0 0x1
 				>;
 			};
 
-			gpio_emu_pins: pinmux_gpio_emu_pins {
+			gpio_emu_pins: gpio-emu-pins {
 				pinctrl-single,bits = <
 				/*
 				 * GPIO_EMU_SEL[31]: 0-GPIO31, 1-EMU33
@@ -170,11 +170,11 @@
 				 * GPIO_EMU_SEL[18]: 0-GPIO18, 1-EMU20
 				 * GPIO_EMU_SEL[17]: 0-GPIO17, 1-EMU19
 				 */
-					0x4 0x0000 0xFFFE0000
+					0x4 0x0000 0xfffe0000
 				>;
 			};
 
-			gpio_timio_pins: pinmux_gpio_timio_pins {
+			gpio_timio_pins: gpio-timio-pins {
 				pinctrl-single,bits = <
 				/*
 				 * GPIO_TIMIO_SEL[15]: 0-GPIO15, 1-TIMO7
@@ -190,11 +190,11 @@
 				 * GPIO_TIMIO_SEL[5]: 0-GPIO5, 1-TIMI3
 				 * GPIO_TIMIO_SEL[4]: 0-GPIO4, 1-TIMI2
 				 */
-					0x4 0x0 0xFFF0
+					0x4 0x0 0xfff0
 				>;
 			};
 
-			gpio_spi2cs_pins: pinmux_gpio_spi2cs_pins {
+			gpio_spi2cs_pins: gpio-spi2cs-pins {
 				pinctrl-single,bits = <
 				/*
 				 * GPIO_SPI2CS_SEL[3]: 0-GPIO3, 1-SPI2CS4
@@ -202,11 +202,11 @@
 				 * GPIO_SPI2CS_SEL[1]: 0-GPIO1, 1-SPI2CS2
 				 * GPIO_SPI2CS_SEL[0]: 0-GPIO0, 1-SPI2CS1
 				 */
-					0x4 0x0 0xF
+					0x4 0x0 0xf
 				>;
 			};
 
-			gpio_dfeio_pins: pinmux_gpio_dfeio_pins {
+			gpio_dfeio_pins: gpio-dfeio-pins {
 				pinctrl-single,bits = <
 				/*
 				 * GPIO_DFEIO_SEL[31]: 0-DFEIO17, 1-GPIO63
@@ -226,11 +226,11 @@
 				 * GPIO_DFEIO_SEL[17]: 0-DFEIO3, 1-GPIO49
 				 * GPIO_DFEIO_SEL[16]: 0-DFEIO2, 1-GPIO48
 				 */
-					0x8 0x0 0xFFFF0000
+					0x8 0x0 0xffff0000
 				>;
 			};
 
-			gpio_emifa_pins: pinmux_gpio_emifa_pins {
+			gpio_emifa_pins: gpio-emifa-pins {
 				pinctrl-single,bits = <
 				/*
 				 * GPIO_EMIFA_SEL[15]: 0-EMIFA17, 1-GPIO47
@@ -250,7 +250,7 @@
 				 * GPIO_EMIFA_SEL[1]: 0-EMIFA1, 1-GPIO33
 				 * GPIO_EMIFA_SEL[0]: 0-EMIFA0, 1-GPIO32
 				 */
-					0x8 0x0 0xFFFF
+					0x8 0x0 0xffff
 				>;
 			};
 		};
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/ti/keystone/keystone.dtsi
index 50789f9e2215..ff16428860a9 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -69,9 +69,9 @@
 	};
 
 	soc0: soc@0 {
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "ti,keystone","simple-bus";
 		interrupt-parent = <&gic>;
 		ranges = <0x0 0x0 0x0 0xc0000000>;
 		dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
@@ -282,7 +282,7 @@
 			ti,davinci-gpio-unbanked = <32>;
 		};
 
-		aemif: aemif@21000A00 {
+		aemif: aemif@21000a00 {
 			compatible = "ti,keystone-aemif", "ti,davinci-aemif";
 			#address-cells = <2>;
 			#size-cells = <1>;
@@ -290,9 +290,9 @@
 			clock-names = "aemif";
 			clock-ranges;
 
-			reg = <0x21000A00 0x00000100>;
+			reg = <0x21000a00 0x00000100>;
 			ranges = <0 0 0x30000000 0x10000000
-				  1 0 0x21000A00 0x00000100>;
+				  1 0 0x21000a00 0x00000100>;
 		};
 
 		pcie0: pcie@21800000 {
diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile
new file mode 100644
index 000000000000..1aef60eef671
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/Makefile
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_OMAP2) += \
+	omap2420-h4.dtb \
+	omap2420-n800.dtb \
+	omap2420-n810.dtb \
+	omap2420-n810-wimax.dtb \
+	omap2430-sdp.dtb
+dtb-$(CONFIG_ARCH_OMAP3) += \
+	am3517-craneboard.dtb \
+	am3517-evm.dtb \
+	am3517_mt_ventoux.dtb \
+	logicpd-torpedo-35xx-devkit.dtb \
+	logicpd-torpedo-37xx-devkit.dtb \
+	logicpd-torpedo-37xx-devkit-28.dtb \
+	logicpd-som-lv-35xx-devkit.dtb \
+	logicpd-som-lv-37xx-devkit.dtb \
+	omap3430-sdp.dtb \
+	omap3-beagle.dtb \
+	omap3-beagle-ab4.dtb \
+	omap3-beagle-xm.dtb \
+	omap3-beagle-xm-ab.dtb \
+	omap3-cm-t3517.dtb \
+	omap3-cm-t3530.dtb \
+	omap3-cm-t3730.dtb \
+	omap3-devkit8000.dtb \
+	omap3-devkit8000-lcd43.dtb \
+	omap3-devkit8000-lcd70.dtb \
+	omap3-echo.dtb \
+	omap3-evm.dtb \
+	omap3-evm-37xx.dtb \
+	omap3-gta04a3.dtb \
+	omap3-gta04a4.dtb \
+	omap3-gta04a5.dtb \
+	omap3-gta04a5one.dtb \
+	omap3-ha.dtb \
+	omap3-ha-lcd.dtb \
+	omap3-igep0020.dtb \
+	omap3-igep0020-rev-f.dtb \
+	omap3-igep0030.dtb \
+	omap3-igep0030-rev-g.dtb \
+	omap3-ldp.dtb \
+	omap3-lilly-dbb056.dtb \
+	omap3-n900.dtb \
+	omap3-n9.dtb \
+	omap3-n950.dtb \
+	omap3-overo-alto35.dtb \
+	omap3-overo-chestnut43.dtb \
+	omap3-overo-gallop43.dtb \
+	omap3-overo-palo35.dtb \
+	omap3-overo-palo43.dtb \
+	omap3-overo-storm-alto35.dtb \
+	omap3-overo-storm-chestnut43.dtb \
+	omap3-overo-storm-gallop43.dtb \
+	omap3-overo-storm-palo35.dtb \
+	omap3-overo-storm-palo43.dtb \
+	omap3-overo-storm-summit.dtb \
+	omap3-overo-storm-tobi.dtb \
+	omap3-overo-storm-tobiduo.dtb \
+	omap3-overo-summit.dtb \
+	omap3-overo-tobi.dtb \
+	omap3-overo-tobiduo.dtb \
+	omap3-pandora-600mhz.dtb \
+	omap3-pandora-1ghz.dtb \
+	omap3-sbc-t3517.dtb \
+	omap3-sbc-t3530.dtb \
+	omap3-sbc-t3730.dtb \
+	omap3-sniper.dtb \
+	omap3-thunder.dtb \
+	omap3-zoom3.dtb
+dtb-$(CONFIG_ARCH_OMAP4) += \
+	omap4-droid-bionic-xt875.dtb \
+	omap4-droid4-xt894.dtb \
+	omap4-duovero-parlor.dtb \
+	omap4-epson-embt2ws.dtb \
+	omap4-kc1.dtb \
+	omap4-panda.dtb \
+	omap4-panda-a4.dtb \
+	omap4-panda-es.dtb \
+	omap4-sdp.dtb \
+	omap4-sdp-es23plus.dtb \
+	omap4-var-dvk-om44.dtb \
+	omap4-var-stk-om44.dtb \
+	omap4-xyboard-mz609.dtb \
+	omap4-xyboard-mz617.dtb
+dtb-$(CONFIG_SOC_AM33XX) += \
+	am335x-baltos-ir2110.dtb \
+	am335x-baltos-ir3220.dtb \
+	am335x-baltos-ir5221.dtb \
+	am335x-base0033.dtb \
+	am335x-bone.dtb \
+	am335x-boneblack.dtb \
+	am335x-boneblack-wireless.dtb \
+	am335x-boneblue.dtb \
+	am335x-bonegreen.dtb \
+	am335x-bonegreen-wireless.dtb \
+	am335x-bonegreen-eco.dtb \
+	am335x-chiliboard.dtb \
+	am335x-cm-t335.dtb \
+	am335x-evm.dtb \
+	am335x-evmsk.dtb \
+	am335x-guardian.dtb \
+	am335x-icev2.dtb \
+	am335x-lxm.dtb \
+	am335x-moxa-uc-2101.dtb \
+	am335x-moxa-uc-8100-me-t.dtb \
+	am335x-myirtech-myd.dtb \
+	am335x-nano.dtb \
+	am335x-netcan-plus-1xx.dtb \
+	am335x-netcom-plus-2xx.dtb \
+	am335x-netcom-plus-8xx.dtb \
+	am335x-pdu001.dtb \
+	am335x-pepper.dtb \
+	am335x-phycore-rdk.dtb \
+	am335x-pocketbeagle.dtb \
+	am335x-regor-rdk.dtb \
+	am335x-sancloud-bbe.dtb \
+	am335x-sancloud-bbe-lite.dtb \
+	am335x-sancloud-bbe-extended-wifi.dtb \
+	am335x-shc.dtb \
+	am335x-sbc-t335.dtb \
+	am335x-sl50.dtb \
+	am335x-wega-rdk.dtb \
+	am335x-osd3358-sm-red.dtb
+dtb-$(CONFIG_SOC_AM43XX) += \
+	am43x-epos-evm.dtb \
+	am437x-cm-t43.dtb \
+	am437x-gp-evm.dtb \
+	am437x-idk-evm.dtb \
+	am437x-sbc-t43.dtb \
+	am437x-sk-evm.dtb
+
+am57xx-evm-dtbs := am57xx-beagle-x15.dtb am57xx-evm.dtbo
+am57xx-evm-reva3-dtbs := am57xx-beagle-x15-revc.dtb am57xx-evm.dtbo
+
+am571x-idk-overlays-dtbs := am571x-idk.dtb \
+	am571x-idk-touchscreen.dtbo am57xx-idk-lcd-osd101t2587.dtbo
+am572x-idk-overlays-dtbs := am572x-idk.dtb \
+	am572x-idk-touchscreen.dtbo am57xx-idk-lcd-osd101t2045.dtbo
+
+# Build time test only, enabled by CONFIG_OF_ALL_DTBS
+dtb- += \
+	am571x-idk-overlays.dtb \
+	am572x-idk-overlays.dtb
+
+dtb-$(CONFIG_SOC_DRA7XX) += \
+	am57xx-beagle-x15.dtb \
+	am57xx-beagle-x15-revb1.dtb \
+	am57xx-beagle-x15-revc.dtb \
+	am57xx-evm.dtb \
+	am57xx-evm-reva3.dtb \
+	am5729-beagleboneai.dtb \
+	am57xx-cl-som-am57x.dtb \
+	am57xx-sbc-am57x.dtb \
+	am572x-idk.dtb \
+	am572x-idk-touchscreen.dtbo \
+	am571x-idk.dtb \
+	am571x-idk-touchscreen.dtbo \
+	am574x-idk.dtb \
+	am57xx-idk-lcd-osd101t2045.dtbo \
+	am57xx-idk-lcd-osd101t2587.dtbo \
+	dra7-evm.dtb \
+	dra72-evm.dtb \
+	dra72-evm-revc.dtb \
+	dra71-evm.dtb \
+	dra76-evm.dtb
+dtb-$(CONFIG_SOC_OMAP5) += \
+	omap5-cm-t54.dtb \
+	omap5-igep0050.dtb \
+	omap5-sbc-t54.dtb \
+	omap5-uevm.dtb
+dtb-$(CONFIG_SOC_TI81XX) += \
+	am3874-iceboard.dtb \
+	dm8148-evm.dtb \
+	dm8148-t410.dtb \
+	dm8168-evm.dtb \
+	dra62x-j5eco-evm.dtb
diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/ti/omap/am335x-baltos-ir2110.dts
new file mode 100644
index 000000000000..f82d2231dfaa
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/am335x-baltos-ir2110.dts
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * https://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+	model = "OnRISC Baltos iR 2110";
+};
+
+&am33xx_pinmux {
+	uart1_pins: uart1-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
+		>;
+	};
+
+	mmc1_pins: mmc1-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&davinci_mdio_sw {
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
+	phy-handle = <&phy0>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+	phy-handle = <&phy1>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+};
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"NC",
+		"NC",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART1_CTSN",
+		"UART1_RTSN",
+		"UART1_RX",
+		"UART1_TX",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"NC",
+		"RMII1_TXD1",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"RMII1_TXD0",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"NC",
+		"NC",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"NC",
+		"NC",
+		"NC",
+		"SD_CD",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SW2_0",
+		"SW2_1",
+		"RMII1_RXD1",
+		"RMII1_RXD0",
+		"UART1_DTR",
+		"UART1_DSR",
+		"UART1_DCD",
+		"UART1_RI",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"RMII1_CRS_DV",
+		"RMII1_RXER",
+		"RMII1_TXEN",
+		"NC",
+		"NC",
+		"NC",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"SW2_2",
+		"SW2_3",
+		"NC",
+		"NC",
+		"NC",
+		"ModeA0",
+		"ModeA1",
+		"ModeA2",
+		"ModeA3",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/ti/omap/am335x-baltos-ir3220.dts
new file mode 100644
index 000000000000..74a2191af146
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/am335x-baltos-ir3220.dts
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * https://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+	model = "OnRISC Baltos iR 3220";
+};
+
+&am33xx_pinmux {
+	tca6416_pins: tca6416-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+		>;
+	};
+
+	uart1_pins: uart1-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
+		>;
+	};
+
+	uart2_pins: uart2-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
+
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+		>;
+	};
+
+	mmc1_pins: mmc1-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&i2c1 {
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tca6416_pins>;
+		gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
+				  "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
+				  "ModeA0", "ModeA1", "ModeA2", "ModeA3",
+				  "ModeB0", "ModeB1", "ModeB2", "ModeB3";
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cpsw_port1 {
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+	phy-handle = <&phy1>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+};
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"UART2_RX",
+		"UART2_TX",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"WLAN_BTN",
+		"W_DISABLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART1_CTSN",
+		"UART1_RTSN",
+		"UART1_RX",
+		"UART1_TX",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"TCA6416_INT",
+		"RMII1_TXD1",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"RMII1_TXD0",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"NC",
+		"NC",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"UART2_DTR",
+		"UART2_DSR",
+		"UART2_DCD",
+		"UART2_RI",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SD_CD",
+		"SD_WP",
+		"RMII1_RXD1",
+		"RMII1_RXD0",
+		"UART1_DTR",
+		"UART1_DSR",
+		"UART1_DCD",
+		"UART1_RI",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"RMII1_CRS_DV",
+		"RMII1_RXER",
+		"RMII1_TXEN",
+		"3G_PWR_EN",
+		"UART2_CTSN",
+		"UART2_RTSN",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"USB1_DRVVBUS",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/ti/omap/am335x-baltos-ir5221.dts
new file mode 100644
index 000000000000..723ff88f76ac
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/am335x-baltos-ir5221.dts
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * https://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+	model = "OnRISC Baltos iR 5221";
+};
+
+&am33xx_pinmux {
+	tca6416_pins: tca6416-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+		>;
+	};
+
+
+	dcan1_pins: dcan1-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)      /* uart0_ctsn.dcan1_tx_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)      /* uart0_rtsn.dcan1_rx_mux0 */
+		>;
+	};
+
+	uart1_pins: uart1-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
+		>;
+	};
+
+	uart2_pins: uart2-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
+
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+		>;
+	};
+
+	mmc1_pins: mmc1-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&i2c1 {
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tca6416_pins>;
+		gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
+				  "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
+				  "ModeA0", "ModeA1", "ModeA2", "ModeA3",
+				  "ModeB0", "ModeB1", "ModeB2", "ModeB3";
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cpsw_port1 {
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+	phy-handle = <&phy1>;
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+};
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"UART2_RX",
+		"UART2_TX",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"WLAN_BTN",
+		"W_DISABLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART1_CTSN",
+		"UART1_RTSN",
+		"UART1_RX",
+		"UART1_TX",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"TCA6416_INT",
+		"RMII1_TXD1",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"RMII1_TXD0",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"DCAN1_TX",
+		"DCAN1_RX",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"UART2_DTR",
+		"UART2_DSR",
+		"UART2_DCD",
+		"UART2_RI",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SD_CD",
+		"SD_WP",
+		"RMII1_RXD1",
+		"RMII1_RXD0",
+		"UART1_DTR",
+		"UART1_DSR",
+		"UART1_DCD",
+		"UART1_RI",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"RMII1_CRS_DV",
+		"RMII1_RXER",
+		"RMII1_TXEN",
+		"3G_PWR_EN",
+		"UART2_CTSN",
+		"UART2_RTSN",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"USB1_DRVVBUS",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/ti/omap/am335x-baltos-leds.dtsi
index 9a79f727baf6..049fd8e1b40f 100644
--- a/arch/arm/boot/dts/am335x-baltos-leds.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-baltos-leds.dtsi
@@ -5,7 +5,7 @@
 
 /*
  * VScom OnRISC
- * http://www.vscom.de
+ * https://www.vscom.de
  */
 
 /*#include "am33xx.dtsi"*/
@@ -17,18 +17,18 @@
 
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "onrisc:red:power";
 			linux,default-trigger = "default-on";
 			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
-		wlan {
+		led-wlan {
 			label = "onrisc:blue:wlan";
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		app {
+		led-app {
 			label = "onrisc:green:app";
 			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
@@ -37,7 +37,7 @@
 };
 
 &am33xx_pinmux {
-	user_leds: pinmux_user_leds {
+	user_leds: user-leds-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mii1_col.gpio3_0 PWR LED */
 			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mii1_txd3.gpio0_16 WLAN LED */
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
index d3eafee79a23..ea47f9960c35 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
@@ -5,7 +5,7 @@
 
 /*
  * VScom OnRISC
- * http://www.vscom.de
+ * https://www.vscom.de
  */
 
 #include "am33xx.dtsi"
@@ -48,7 +48,7 @@
 };
 
 &am33xx_pinmux {
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_ad8.mmc1_dat0_mux0 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_ad9.mmc1_dat1_mux0 */
@@ -60,33 +60,33 @@
 		>;
 	};
 
-	wl12xx_gpio: pinmux_wl12xx_gpio {
+	wl12xx_gpio: wl12xx-gpio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_OUTPUT_PULLUP, MUX_MODE7)      /* emu1.gpio3[8] */
 		>;
 	};
 
-	tps65910_pins: pinmux_tps65910_pins {
+	tps65910_pins: tps65910-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE7)      /* gpmc_ben1.gpio1[28] */
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE2)      /* spi0_d1.i2c1_sda_mux3 */
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE2)      /* spi0_cs0.i2c1_scl_mux3 */
 		>;
 	};
 
-	uart0_pins: pinmux_uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	cpsw_default: cpsw_default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 */
 			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)       /* mii1_crs.rmii1_crs_dv */
@@ -114,7 +114,7 @@
 		>;
 	};
 
-	cpsw_sleep: cpsw_sleep {
+	cpsw_sleep: cpsw-sleep-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
 			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -141,7 +141,7 @@
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
+	davinci_mdio_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			/* MDIO */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)	/* mdio_data.mdio_data */
@@ -149,7 +149,7 @@
 		>;
 	};
 
-	davinci_mdio_sleep: davinci_mdio_sleep {
+	davinci_mdio_sleep: davinci-mdio-sleep-pins {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -157,7 +157,7 @@
 		>;
 	};
 
-	nandflash_pins_s0: nandflash_pins_s0 {
+	nandflash_pins_s0: nandflash-s0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
@@ -197,9 +197,8 @@
 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
-		ti,nand-xfer-type = "polled";
+		ti,nand-xfer-type = "prefetch-dma";
 
-		gpmc,device-nand = "true";
 		gpmc,device-width = <1>;
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
@@ -251,14 +250,14 @@
 		pinctrl-0 = <&tps65910_pins>;
 	};
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c02";
 		pagesize = <8>;
 		reg = <0x50>;
 	};
 };
 
-#include "tps65910.dtsi"
+#include "../../tps65910.dtsi"
 
 &tps {
 	vcc1-supply = <&vbat>;
@@ -270,7 +269,7 @@
 	vcc7-supply = <&vbat>;
 	vccio-supply = <&vbat>;
 
-	ti,en-ck32k-xtal = <1>;
+	ti,en-ck32k-xtal;
 
 	regulators {
 		vrtc_reg: regulator@0 {
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/ti/omap/am335x-base0033.dts
index 89c00ce42c26..46078af4b7a3 100644
--- a/arch/arm/boot/dts/am335x-base0033.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-base0033.dts
@@ -2,7 +2,7 @@
 /*
  * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION
  *
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ * Copyright (C) 2013 ISEE 2007 SL - https://www.isee.biz
  */
 
 #include "am335x-igep0033.dtsi"
@@ -41,7 +41,7 @@
 };
 
 &am33xx_pinmux {
-	nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
+	nxp_hdmi_pins: nxp-hdmi-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3)	/* xdma_event_intr0.clkout1 */
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
@@ -66,13 +66,13 @@
 			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
 		>;
 	};
-	nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
+	nxp_hdmi_off_pins: nxp-hdmi-off-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3)	/* xdma_event_intr0.clkout1 */
 		>;
 	};
 
-	leds_base_pins: pinmux_leds_base_pins {
+	leds_base_pins: leds-base-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi
index 02e04a12a270..ad1e60a9b6fd 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi
@@ -66,7 +66,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&clkout2_pin>;
 
-	user_leds_s0: user_leds_s0 {
+	user_leds_s0: user-leds-s0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
@@ -75,34 +75,34 @@
 		>;
 	};
 
-	i2c0_pins: pinmux_i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)	/* i2c0_sda.i2c0_sda */
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
-	i2c2_pins: pinmux_i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
 			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
 		>;
 	};
 
-	uart0_pins: pinmux_uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	clkout2_pin: pinmux_clkout2_pin {
+	clkout2_pin: clkout2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 
-	cpsw_default: cpsw_default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -121,7 +121,7 @@
 		>;
 	};
 
-	cpsw_sleep: cpsw_sleep {
+	cpsw_sleep: cpsw-sleep-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -140,23 +140,27 @@
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
+	davinci_mdio_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			/* MDIO */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			/* Added to support GPIO controlled PHY reset */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE7)
 		>;
 	};
 
-	davinci_mdio_sleep: davinci_mdio_sleep {
+	davinci_mdio_sleep: davinci-mdio-sleep-pins {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			/* Added to support GPIO controlled PHY reset */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* spio0_cs1.gpio0_6 */
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -168,7 +172,7 @@
 		>;
 	};
 
-	emmc_pins: pinmux_emmc_pins {
+	emmc_pins: emmc-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
@@ -208,18 +212,23 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	tps: tps@24 {
+	tps: pmic@24 {
 		reg = <0x24>;
 	};
 
-	baseboard_eeprom: baseboard_eeprom@50 {
+	baseboard_eeprom: eeprom@50 {
 		compatible = "atmel,24c256";
 		reg = <0x50>;
+		vcc-supply = <&ldo4_reg>;
 
-		#address-cells = <1>;
-		#size-cells = <1>;
-		baseboard_data: baseboard_data@0 {
-			reg = <0 0x100>;
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			baseboard_data: baseboard_data@0 {
+				reg = <0 0x100>;
+			};
 		};
 	};
 };
@@ -231,49 +240,69 @@
 	status = "okay";
 	clock-frequency = <100000>;
 
-	cape_eeprom0: cape_eeprom0@54 {
+	cape_eeprom0: eeprom@54 {
 		compatible = "atmel,24c256";
 		reg = <0x54>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		cape0_data: cape_data@0 {
-			reg = <0 0x100>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cape0_data: cape_data@0 {
+				reg = <0 0x100>;
+			};
 		};
 	};
 
-	cape_eeprom1: cape_eeprom1@55 {
+	cape_eeprom1: eeprom@55 {
 		compatible = "atmel,24c256";
 		reg = <0x55>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		cape1_data: cape_data@0 {
-			reg = <0 0x100>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cape1_data: cape_data@0 {
+				reg = <0 0x100>;
+			};
 		};
 	};
 
-	cape_eeprom2: cape_eeprom2@56 {
+	cape_eeprom2: eeprom@56 {
 		compatible = "atmel,24c256";
 		reg = <0x56>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		cape2_data: cape_data@0 {
-			reg = <0 0x100>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cape2_data: cape_data@0 {
+				reg = <0 0x100>;
+			};
 		};
 	};
 
-	cape_eeprom3: cape_eeprom3@57 {
+	cape_eeprom3: eeprom@57 {
 		compatible = "atmel,24c256";
 		reg = <0x57>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		cape3_data: cape_data@0 {
-			reg = <0 0x100>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cape3_data: cape_data@0 {
+				reg = <0 0x100>;
+			};
 		};
 	};
 };
 
 
-/include/ "tps65217.dtsi"
+/include/ "../../tps65217.dtsi"
 
 &tps {
 	/*
@@ -284,8 +313,8 @@
 	 * For details, see linux-omap mailing list May 2015 thread
 	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
 	 * In particular, messages:
-	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
-	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
+	 *	https://www.spinics.net/lists/linux-omap/msg118585.html
+	 *	https://www.spinics.net/lists/linux-omap/msg118615.html
 	 *
 	 * You can override this later with
 	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
@@ -377,6 +406,10 @@
 
 	ethphy0: ethernet-phy@0 {
 		reg = <0>;
+		/* Support GPIO reset on revision C3 boards */
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <300>;
+		reset-deassert-us = <50000>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/ti/omap/am335x-bone.dts
index b5d85ef51a02..b5d85ef51a02 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-bone.dts
diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-boneblack-common.dtsi
index a7a8c61ef9b2..a7a8c61ef9b2 100644
--- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-boneblack-common.dtsi
diff --git a/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi b/arch/arm/boot/dts/ti/omap/am335x-boneblack-hdmi.dtsi
index 7cfddada9348..109f08fd174d 100644
--- a/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-boneblack-hdmi.dtsi
@@ -7,7 +7,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 &am33xx_pinmux {
-	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
+	nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
@@ -33,13 +33,13 @@
 		>;
 	};
 
-	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
+	nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
 		>;
 	};
 
-	mcasp0_pins: mcasp0_pins {
+	mcasp0_pins: mcasp0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
@@ -85,8 +85,13 @@
 		audio-ports = <	TDA998x_I2S	0x03>;
 
 		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
 			port@0 {
-				hdmi_0: endpoint@0 {
+				reg = <0>;
+
+				hdmi_0: endpoint {
 					remote-endpoint = <&lcdc_0>;
 				};
 			};
diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/ti/omap/am335x-boneblack-wireless.dts
index 207d2b63e0eb..b4b4b80df08c 100644
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-boneblack-wireless.dts
@@ -28,13 +28,13 @@
 };
 
 &am33xx_pinmux {
-	bt_pins: pinmux_bt_pins {
+	bt_pins: bt-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gmii1_txd0.gpio0_28 - BT_EN */
 		>;
 	};
 
-	mmc3_pins: pinmux_mmc3_pins {
+	mmc3_pins: mmc3-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */
@@ -45,7 +45,7 @@
 		>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gmii1_rxd3.uart3_rxd */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* gmii1_rxd2.uart3_txd */
@@ -54,7 +54,7 @@
 		>;
 	};
 
-	wl18xx_pins: pinmux_wl18xx_pins {
+	wl18xx_pins: wl18xx-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gmii1_txclk.gpio3_9 WL_EN */
 			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_refclk.gpio0_29 WL_IRQ */
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/ti/omap/am335x-boneblack.dts
index b956e2f60fe0..b4fdcf9c02b5 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-boneblack.dts
@@ -20,7 +20,8 @@
 	 * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
 	 * to support 1GHz OPP so enable it for PG 2.0 on this board.
 	 */
-	oppnitro-1000000000 {
+	opp-1000000000 {
+		/* OPP Nitro */
 		opp-supported-hw = <0x06 0x0100>;
 	};
 };
@@ -34,7 +35,7 @@
 		"P9_18 [spi0_d1]",
 		"P9_17 [spi0_cs0]",
 		"[mmc0_cd]",
-		"P8_42A [ecappwm0]",
+		"P9_42A [ecappwm0]",
 		"P8_35 [lcd d12]",
 		"P8_33 [lcd d13]",
 		"P8_31 [lcd d14]",
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts
index 34579e98636e..f579df4c2c54 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts
@@ -115,7 +115,7 @@
 };
 
 &am33xx_pinmux {
-	user_leds_s0: user_leds_s0 {
+	user_leds_s0: user-leds-s0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
@@ -132,7 +132,7 @@
 		>;
 	};
 
-	i2c2_pins: pinmux_i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D18) uart1_ctsn.I2C2_SDA */
 			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D17) uart1_rtsn.I2C2_SCL */
@@ -140,7 +140,7 @@
 	};
 
 	/* UT0 */
-	uart0_pins: pinmux_uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
@@ -148,7 +148,7 @@
 	};
 
 	/* UT1 */
-	uart1_pins: pinmux_uart1_pins {
+	uart1_pins: uart1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
@@ -156,7 +156,7 @@
 	};
 
 	/* GPS */
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* (A17) spi0_sclk.uart2_rxd */
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* (B17) spi0_d0.uart2_txd */
@@ -164,27 +164,27 @@
 	};
 
 	/* DSM2 */
-	uart4_pins: pinmux_uart4_pins {
+	uart4_pins: uart4-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)	/* (T17) gpmc_wait0.uart4_rxd */
 		>;
 	};
 
 	/* UT5 */
-	uart5_pins: pinmux_uart5_pins {
+	uart5_pins: uart5-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4)	/* (U2) lcd_data9.uart5_rxd */
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT_PULLDOWN, MUX_MODE4)	/* (U1) lcd_data8.uart5_txd */
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* (C15) spi0_cs1.gpio0[6] */
 		>;
 	};
 
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* (U9) gpmc_csn1.mmc1_clk */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* (V9) gpmc_csn2.mmc1_cmd */
@@ -199,7 +199,7 @@
 		>;
 	};
 
-	mmc3_pins: pinmux_mmc3_pins {
+	mmc3_pins: mmc3-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6)	/* (L15) gmii1_rxd1.mmc2_clk */
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6)	/* (J16) gmii1_txen.mmc2_cmd */
@@ -210,13 +210,13 @@
 		>;
 	};
 
-	bt_pins: pinmux_bt_pins {
+	bt_pins: bt-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* (K17) gmii1_txd0.gpio0[28] - BT_EN */
 		>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* (L17) gmii1_rxd3.uart3_rxd */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* (L16) gmii1_rxd2.uart3_txd */
@@ -225,7 +225,7 @@
 		>;
 	};
 
-	wl18xx_pins: pinmux_wl18xx_pins {
+	wl18xx_pins: wl18xx-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* (K18) gmii1_txclk.gpio3[9] - WL_EN */
 			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */
@@ -234,7 +234,7 @@
 	};
 
 	/* DCAN */
-	dcan1_pins: pinmux_dcan1_pins {
+	dcan1_pins: dcan1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)		/* (E17) uart0_rtsn.dcan1_rx */
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)		/* (E18) uart0_ctsn.dcan1_tx */
@@ -243,7 +243,7 @@
 	};
 
 	/* E1 */
-	eqep0_pins: pinmux_eqep0_pins {
+	eqep0_pins: eqep0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT, MUX_MODE1)		/* (B12) mcasp0_aclkr.eQEP0A_in */
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_INPUT, MUX_MODE1)		/* (C13) mcasp0_fsr.eQEP0B_in */
@@ -251,7 +251,7 @@
 	};
 
 	/* E2 */
-	eqep1_pins: pinmux_eqep1_pins {
+	eqep1_pins: eqep1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT, MUX_MODE2)		/* (V2) lcd_data12.eQEP1A_in */
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_INPUT, MUX_MODE2)		/* (V3) lcd_data13.eQEP1B_in */
@@ -259,7 +259,7 @@
 	};
 
 	/* E3 */
-	eqep2_pins: pinmux_eqep2_pins {
+	eqep2_pins: eqep2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE4)		/* (T12) gpmc_ad12.eQEP2A_in */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE4)		/* (R12) gpmc_ad13.eQEP2B_in */
@@ -313,14 +313,18 @@
 };
 
 &i2c0 {
-	baseboard_eeprom: baseboard_eeprom@50 {
+	baseboard_eeprom: eeprom@50 {
 		compatible = "atmel,24c256";
 		reg = <0x50>;
 
-		#address-cells = <1>;
-		#size-cells = <1>;
-		baseboard_data: baseboard_data@0 {
-			reg = <0 0x100>;
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			baseboard_data: baseboard_data@0 {
+				reg = <0 0x100>;
+			};
 		};
 	};
 };
@@ -353,7 +357,7 @@
 	};
 };
 
-/include/ "tps65217.dtsi"
+/include/ "../../tps65217.dtsi"
 
 &tps {
 	/delete-property/ ti,pmic-shutdown-controller;
diff --git a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-bonegreen-common.dtsi
index 9f7fb63744d0..383beeddf595 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-bonegreen-common.dtsi
@@ -22,7 +22,7 @@
 };
 
 &am33xx_pinmux {
-	uart2_pins: uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)	/* spi0_sclk.uart2_rxd */
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)	/* spi0_d0.uart2_txd */
diff --git a/arch/arm/boot/dts/ti/omap/am335x-bonegreen-eco.dts b/arch/arm/boot/dts/ti/omap/am335x-bonegreen-eco.dts
new file mode 100644
index 000000000000..d21118cdb6c2
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/am335x-bonegreen-eco.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2025 Bootlin
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-bonegreen-common.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "Seeed Studio BeagleBone Green Eco";
+	compatible = "seeed,am335x-bone-green-eco", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&buck1>;
+		};
+	};
+
+	sys_5v: regulator-sys-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	v3v3: regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-always-on;
+	};
+};
+
+&usb0 {
+	interrupts-extended = <&intc 18>;
+	interrupt-names = "mc";
+};
+
+&baseboard_eeprom {
+	vcc-supply = <&v3v3>;
+};
+
+&i2c0 {
+	/delete-node/ pmic@24;
+
+	tps65214: pmic@30 {
+		compatible = "ti,tps65214";
+		reg = <0x30>;
+		buck1-supply = <&sys_5v>;
+		buck2-supply = <&sys_5v>;
+		buck3-supply = <&sys_5v>;
+		ldo1-supply = <&sys_5v>;
+		ldo2-supply = <&sys_5v>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <7>;
+		pinctrl-0 = <&pmic_irq_pins_default>;
+
+		regulators {
+			buck1: buck1 {
+				regulator-name = "vdd_mpu";
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <1298500>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck2: buck2 {
+				regulator-name = "vdd_core";
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck3: buck3 {
+				regulator-name = "vdds_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-name = "vdd_1v8_1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "vdd_1v8_2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&dp83867_0>;
+	ti,dual-emac-pvid = <1>;
+};
+
+&mac_sw {
+	pinctrl-0 = <&cpsw_b_default>;
+	pinctrl-1 = <&cpsw_b_sleep>;
+};
+
+&davinci_mdio_sw {
+	/delete-node/ ethernet-phy@0;
+
+	dp83867_0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&am33xx_pinmux {
+	cpsw_b_default: cpsw-b-default-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)
+		>;
+	};
+
+	cpsw_b_sleep: cpsw-b-sleep-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(AM335X_PIN_NNMI, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/ti/omap/am335x-bonegreen-wireless.dts
index d388cffa1a4d..a4f5b5262645 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-bonegreen-wireless.dts
@@ -27,13 +27,13 @@
 };
 
 &am33xx_pinmux {
-	bt_pins: pinmux_bt_pins {
+	bt_pins: bt-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_ad12.gpio1_28 BT_EN */
 		>;
 	};
 
-	mmc3_pins: pinmux_mmc3_pins {
+	mmc3_pins: mmc3-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad12.mmc2_dat0 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad13.mmc2_dat1 */
@@ -44,7 +44,7 @@
 		>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gmii1_rxd3.uart3_rxd */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* gmii1_rxd2.uart3_txd */
@@ -53,7 +53,7 @@
 		>;
 	};
 
-	wl18xx_pins: pinmux_wl18xx_pins {
+	wl18xx_pins: wl18xx-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad10.gpio0_26 WL_EN */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad11.gpio0_27 WL_IRQ */
diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/ti/omap/am335x-bonegreen.dts
index 18cc0f49e999..18cc0f49e999 100644
--- a/arch/arm/boot/dts/am335x-bonegreen.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-bonegreen.dts
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/ti/omap/am335x-chiliboard.dts
index a223cdd3e30e..648e97fe1dfd 100644
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-chiliboard.dts
@@ -36,14 +36,14 @@
 };
 
 &am33xx_pinmux {
-	uart0_pins: pinmux_uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	cpsw_default: cpsw_default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 */
 			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
@@ -57,7 +57,7 @@
 		>;
 	};
 
-	cpsw_sleep: cpsw_sleep {
+	cpsw_sleep: cpsw-sleep-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
 			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -72,7 +72,7 @@
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
+	davinci_mdio_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			/* mdio_data.mdio_data */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
@@ -81,7 +81,7 @@
 		>;
 	};
 
-	davinci_mdio_sleep: davinci_mdio_sleep {
+	davinci_mdio_sleep: davinci-mdio-sleep-pins {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -89,13 +89,13 @@
 		>;
 	};
 
-	usb1_drvvbus: usb1_drvvbus {
+	usb1_drvvbus: usb1-drvvbus-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_USB1_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	sd_pins: pinmux_sd_card {
+	sd_pins: sd-card-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT, MUX_MODE0)
@@ -107,7 +107,7 @@
 		>;
 	};
 
-	led_gpio_pins: led_gpio_pins {
+	led_gpio_pins: led-gpio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_OUTPUT, MUX_MODE7) /* emu0.gpio3_7 */
 			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_OUTPUT, MUX_MODE7) /* emu1.gpio3_8 */
diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/ti/omap/am335x-chilisom.dtsi
index 43b61e43ed1e..bd43da6356b6 100644
--- a/arch/arm/boot/dts/am335x-chilisom.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-chilisom.dtsi
@@ -25,14 +25,14 @@
 &am33xx_pinmux {
 	pinctrl-names = "default";
 
-	i2c0_pins: pinmux_i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
-	nandflash_pins: nandflash_pins {
+	nandflash_pins: nandflash-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLDOWN, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLDOWN, MUX_MODE0)
@@ -66,7 +66,7 @@
 
 };
 
-/include/ "tps65217.dtsi"
+/include/ "../../tps65217.dtsi"
 
 &tps {
 	regulators {
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
index 993b13420699..ece7f7854f6a 100644
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
@@ -2,7 +2,7 @@
 /*
  * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335
  *
- * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - https://www.compulab.co.il/
  */
 
 /dts-v1/;
@@ -88,14 +88,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&bluetooth_pins>;
 
-	i2c0_pins: pinmux_i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			/* uart0_ctsn.i2c1_sda */
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE2)
@@ -104,14 +104,14 @@
 		>;
 	};
 
-	gpio_led_pins: pinmux_gpio_led_pins {
+	gpio_led_pins: gpio-led-pins {
 		pinctrl-single,pins = <
 			/* gpmc_csn3.gpio2_0 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT, MUX_MODE7)
 		>;
 	};
 
-	nandflash_pins: pinmux_nandflash_pins {
+	nandflash_pins: nandflash-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -132,14 +132,14 @@
 		>;
 	};
 
-	uart0_pins: pinmux_uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart1_pins: pinmux_uart1_pins {
+	uart1_pins: uart1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
@@ -148,7 +148,7 @@
 		>;
 	};
 
-	dcan0_pins: pinmux_dcan0_pins {
+	dcan0_pins: dcan0-pins {
 		pinctrl-single,pins = <
 			/* uart1_ctsn.dcan0_tx */
 			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2)
@@ -157,7 +157,7 @@
 		>;
 	};
 
-	dcan1_pins: pinmux_dcan1_pins {
+	dcan1_pins: dcan1-pins {
 		pinctrl-single,pins = <
 			/* uart1_rxd.dcan1_tx */
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT, MUX_MODE2)
@@ -166,13 +166,13 @@
 		>;
 	};
 
-	ecap0_pins: pinmux_ecap0_pins {
+	ecap0_pins: ecap0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, 0x0, MUX_MODE0)
 		>;
 	};
 
-	cpsw_default: cpsw_default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 */
 			/* mii1_tx_en.rgmii1_tctl */
@@ -202,7 +202,7 @@
 		>;
 	};
 
-	cpsw_sleep: cpsw_sleep {
+	cpsw_sleep: cpsw-sleep-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -220,14 +220,14 @@
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
+	davinci_mdio_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
-	davinci_mdio_sleep: davinci_mdio_sleep {
+	davinci_mdio_sleep: davinci-mdio-sleep-pins {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -235,7 +235,7 @@
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -246,7 +246,7 @@
 		>;
 	};
 
-	spi0_pins: pinmux_spi0_pins {
+	spi0_pins: spi0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLUP, MUX_MODE0)
@@ -257,7 +257,7 @@
 	};
 
 	/* wl1271 bluetooth */
-	bluetooth_pins: pinmux_bluetooth_pins {
+	bluetooth_pins: bluetooth-pins {
 		pinctrl-single,pins = <
 			/* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */
 			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLUP, MUX_MODE7)
@@ -265,7 +265,7 @@
 	};
 
 	/* TLV320AIC23B codec */
-	mcasp1_pins: pinmux_mcasp1_pins {
+	mcasp1_pins: mcasp1-pins {
 		pinctrl-single,pins = <
 			/* MII1_CRS.mcasp1_aclkx */
 			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4)
@@ -279,7 +279,7 @@
 	};
 
 	/* wl1271 WiFi */
-	wifi_pins: pinmux_wifi_pins {
+	wifi_pins: wifi-pins {
 		pinctrl-single,pins = <
 			/* EMU1.gpio3_8 - WiFi IRQ */
 			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLUP, MUX_MODE7)
@@ -483,8 +483,6 @@ status = "okay";
 
 		op-mode = <0>;          /* MCASP_IIS_MODE */
 		tdm-slots = <2>;
-		/* 16 serializers */
-		num-serializer = <16>;
 		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 			0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0
 		>;
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/ti/omap/am335x-evm.dts
index 25c6ac9913d2..20222f82f21b 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-evm.dts
@@ -126,7 +126,7 @@
 		backlight = <&backlight>;
 
 		port {
-			panel_0: endpoint@0 {
+			panel_0: endpoint {
 				remote-endpoint = <&lcdc_0>;
 			};
 		};
@@ -163,7 +163,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
 
-	matrix_keypad_s0: matrix_keypad_s0 {
+	matrix_keypad_s0: matrix-keypad-s0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
@@ -173,35 +173,35 @@
 		>;
 	};
 
-	volume_keys_s0: volume_keys_s0 {
+	volume_keys_s0: volume-keys-s0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* spi0_sclk.gpio0_2 */
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* spi0_d0.gpio0_3 */
 		>;
 	};
 
-	i2c0_pins: pinmux_i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)	/* i2c0_sda.i2c0_sda */
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_d1.i2c1_sda */
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_cs0.i2c1_scl */
 		>;
 	};
 
-	uart0_pins: pinmux_uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart1_pins: pinmux_uart1_pins {
+	uart1_pins: uart1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
@@ -210,13 +210,13 @@
 		>;
 	};
 
-	clkout2_pin: pinmux_clkout2_pin {
+	clkout2_pin: clkout2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 
-	nandflash_pins_s0: nandflash_pins_s0 {
+	nandflash_pins_s0: nandflash-s0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -236,13 +236,13 @@
 		>;
 	};
 
-	ecap0_pins: backlight_pins {
+	ecap0_pins: backlight-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, 0x0, MUX_MODE0)
 		>;
 	};
 
-	cpsw_default: cpsw_default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 */
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
@@ -260,7 +260,7 @@
 		>;
 	};
 
-	cpsw_sleep: cpsw_sleep {
+	cpsw_sleep: cpsw-sleep-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -278,7 +278,7 @@
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
+	davinci_mdio_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			/* MDIO */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
@@ -286,7 +286,7 @@
 		>;
 	};
 
-	davinci_mdio_sleep: davinci_mdio_sleep {
+	davinci_mdio_sleep: davinci-mdio-sleep-pins {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -294,7 +294,7 @@
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* spi0_cs1.gpio0_6 */
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -307,7 +307,7 @@
 		>;
 	};
 
-	mmc3_pins: pinmux_mmc3_pins {
+	mmc3_pins: mmc3-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
@@ -318,7 +318,7 @@
 		>;
 	};
 
-	wlan_pins: pinmux_wlan_pins {
+	wlan_pins: wlan-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a0.gpio1_16 */
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT, MUX_MODE7)		/* mcasp0_ahclkr.gpio3_17 */
@@ -326,7 +326,7 @@
 		>;
 	};
 
-	lcd_pins_s0: lcd_pins_s0 {
+	lcd_pins_s0: lcd-s0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
@@ -359,7 +359,7 @@
 		>;
 	};
 
-	mcasp1_pins: mcasp1_pins {
+	mcasp1_pins: mcasp1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
@@ -368,7 +368,7 @@
 		>;
 	};
 
-	mcasp1_pins_sleep: mcasp1_pins_sleep {
+	mcasp1_pins_sleep: mcasp1-sleep-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -377,7 +377,7 @@
 		>;
 	};
 
-	dcan1_pins_default: dcan1_pins_default {
+	dcan1_pins_default: dcan1-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
@@ -388,7 +388,7 @@
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins>;
-
+	wakeup-source;
 	status = "okay";
 };
 
@@ -544,7 +544,7 @@
 		#size-cells = <1>;
 		partition@0 {
 			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
+			reg = <0x00000000 0x00020000>;
 		};
 		partition@1 {
 			label = "NAND.SPL.backup1";
@@ -585,7 +585,7 @@
 	};
 };
 
-#include "tps65910.dtsi"
+#include "../../tps65910.dtsi"
 
 &mcasp1 {
 	#sound-dai-cells = <0>;
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/ti/omap/am335x-evmsk.dts
index 9c458e5a95b7..eba888dcd60e 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-evmsk.dts
@@ -5,7 +5,7 @@
 
 /*
  * AM335x Starter Kit
- * http://www.ti.com/tool/tmdssk3358
+ * https://www.ti.com/tool/tmdssk3358
  */
 
 /dts-v1/;
@@ -191,7 +191,7 @@
 		backlight = <&lcd_bl>;
 
 		port {
-			panel_0: endpoint@0 {
+			panel_0: endpoint {
 				remote-endpoint = <&lcdc_0>;
 			};
 		};
@@ -202,7 +202,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
 
-	lcd_pins_default: lcd_pins_default {
+	lcd_pins_default: lcd-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
@@ -235,7 +235,7 @@
 		>;
 	};
 
-	lcd_pins_sleep: lcd_pins_sleep {
+	lcd_pins_sleep: lcd-sleep-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad8.lcd_data23 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad9.lcd_data22 */
@@ -269,7 +269,7 @@
 	};
 
 
-	user_leds_s0: user_leds_s0 {
+	user_leds_s0: user-leds-s0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
@@ -278,7 +278,7 @@
 		>;
 	};
 
-	gpio_keys_s0: gpio_keys_s0 {
+	gpio_keys_s0: gpio-keys-s0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
@@ -287,33 +287,33 @@
 		>;
 	};
 
-	i2c0_pins: pinmux_i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
-	uart0_pins: pinmux_uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	clkout2_pin: pinmux_clkout2_pin {
+	clkout2_pin: clkout2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 
-	ecap2_pins: backlight_pins {
+	ecap2_pins: backlight-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, 0x0, MUX_MODE4)	/* mcasp0_ahclkr.ecap2_in_pwm2_out */
 		>;
 	};
 
-	cpsw_default: cpsw_default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 */
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
@@ -345,7 +345,7 @@
 		>;
 	};
 
-	cpsw_sleep: cpsw_sleep {
+	cpsw_sleep: cpsw-sleep-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -377,7 +377,7 @@
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
+	davinci_mdio_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			/* MDIO */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
@@ -385,7 +385,7 @@
 		>;
 	};
 
-	davinci_mdio_sleep: davinci_mdio_sleep {
+	davinci_mdio_sleep: davinci-mdio-sleep-pins {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -393,7 +393,7 @@
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) 		/* spi0_cs1.gpio0_6 */
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -406,7 +406,7 @@
 		>;
 	};
 
-	mcasp1_pins: mcasp1_pins {
+	mcasp1_pins: mcasp1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
@@ -415,7 +415,7 @@
 		>;
 	};
 
-	mcasp1_pins_sleep: mcasp1_pins_sleep {
+	mcasp1_pins_sleep: mcasp1-sleep-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -424,7 +424,7 @@
 		>;
 	};
 
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
@@ -436,7 +436,7 @@
 		>;
 	};
 
-	wl12xx_gpio: pinmux_wl12xx_gpio {
+	wl12xx_gpio: wl12xx-gpio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_csn0.gpio1_29 */
 		>;
@@ -517,7 +517,7 @@
 	};
 };
 
-#include "tps65910.dtsi"
+#include "../../tps65910.dtsi"
 
 &tps {
 	vcc1-supply = <&vbat>;
diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/ti/omap/am335x-guardian.dts
index f6356266564c..4b070e634b28 100644
--- a/arch/arm/boot/dts/am335x-guardian.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-guardian.dts
@@ -74,7 +74,7 @@
 		pinctrl-1 = <&lcd_pins_sleep>;
 
 		display-timings {
-			320x240 {
+			timing-320x240 {
 				hactive         = <320>;
 				vactive         = <240>;
 				hback-porch     = <68>;
@@ -103,8 +103,9 @@
 
 	};
 
-	guardian_beeper: dmtimer-pwm@7 {
+	guardian_beeper: pwm-7 {
 		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
 		ti,timers = <&timer7>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&guardian_beeper_pins>;
@@ -291,7 +292,7 @@
 	status = "okay";
 };
 
-#include "tps65217.dtsi"
+#include "../../tps65217.dtsi"
 
 &tps {
   /*
@@ -302,8 +303,8 @@
    * For details, see linux-omap mailing list May 2015 thread
    *  [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
    * In particular, messages:
-   *  http://www.spinics.net/lists/linux-omap/msg118585.html
-   *  http://www.spinics.net/lists/linux-omap/msg118615.html
+   *  https://www.spinics.net/lists/linux-omap/msg118585.html
+   *  https://www.spinics.net/lists/linux-omap/msg118615.html
    *
    * You can override this later with
    *  &tps {  /delete-property/ ti,pmic-shutdown-controller;  }
@@ -480,14 +481,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&clkout2_pin &guardian_interface_pins>;
 
-	clkout2_pin: pinmux_clkout2_pin {
+	clkout2_pin: clkout2-pins {
 		pinctrl-single,pins = <
 			/* xdma_event_intr1.clkout2 */
 			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
 		>;
 	};
 
-	guardian_interface_pins: pinmux_interface_pins {
+	guardian_interface_pins: interface-pins {
 		pinctrl-single,pins = <
 			/* ADC_BATSENSE_EN */
 			/* (A14) MCASP0_AHCLKx.gpio3[21] */
@@ -517,13 +518,13 @@
 		>;
 	};
 
-	guardian_beeper_pins: pinmux_dmtimer7_pins {
+	guardian_beeper_pins: dmtimer7-pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) /* (E18) timer7 */
 		>;
 	};
 
-	guardian_button_pins: pinmux_guardian_button_pins {
+	guardian_button_pins: guardian-button-pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */
 			AM33XX_IOPAD(0x884, PIN_INPUT | MUX_MODE7) /* (V9)  gpmc_csn2.gpio1[31] */
@@ -531,28 +532,28 @@
 	};
 
 
-	i2c0_pins: pinmux_i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
 			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
 		>;
 	};
 
-	led_bl_pins: gpio_led_bl_pins {
+	led_bl_pins: gpio-led-bl-pins {
 		pinctrl-single,pins = <
 			/* P9_14, gpmc_a[2].GPIO1[18] (backlight control) */
 			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
 		>;
 	};
 
-	lcd_disen_pins: pinmux_lcd_disen_pins {
+	lcd_disen_pins: lcd-disen-pins {
 		pinctrl-single,pins = <
 			/* P9_27, mcasp0_fsr.gpio3[19] (lcd_disen) */
 			AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7)
 		>;
 	};
 
-	lcd_pins_default: pinmux_lcd_pins_default {
+	lcd_pins_default: lcd-default-pins {
 		pinctrl-single,pins = <
 			/* (U10) gpmc_ad8.lcd_data23 */
 			AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
@@ -613,7 +614,7 @@
 		>;
 	};
 
-	lcd_pins_sleep: pinmux_lcd_pins_sleep {
+	lcd_pins_sleep: lcd-sleep-pins {
 		pinctrl-single,pins = <
 			/* lcd_data0.lcd_data0 */
 			AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
@@ -658,13 +659,13 @@
 		>;
 	};
 
-	guardian_led_pins: pinmux_guardian_led_pins {
+	guardian_led_pins: guardian-led-pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) /* (T16) gpmc_a10.gpio1[26] */
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_dat3.mmc0_dat3 */
 			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_dat2.mmc0_dat2 */
@@ -676,7 +677,7 @@
 		>;
 	};
 
-	spi0_pins: pinmux_spi0_pins {
+	spi0_pins: spi0-pins {
 		pinctrl-single,pins = <
 			/* SPI0_CLK  - spi0_clk.spi */
 			AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
@@ -689,7 +690,7 @@
 		>;
 	};
 
-	uart0_pins: pinmux_uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			/* uart0_rxd.uart0_rxd */
 			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
@@ -698,7 +699,7 @@
 		>;
 	};
 
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			/* K18 uart2_rxd.mirx_txd */
 			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1)
@@ -707,7 +708,7 @@
 		>;
 	};
 
-	nandflash_pins: pinmux_nandflash_pins {
+	nandflash_pins: nandflash-pins {
 		pinctrl-single,pins = <
 			/* (U7) gpmc_ad0.gpmc_ad0 */
 			AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0)
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/ti/omap/am335x-icev2.dts
index 5835c0cdda50..6f0f4fba043b 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-icev2.dts
@@ -5,7 +5,7 @@
 
 /*
  * AM335x ICE V2 board
- * http://www.ti.com/tool/tmdsice3359
+ * https://www.ti.com/tool/tmdsice3359
  */
 
 /dts-v1/;
@@ -152,7 +152,7 @@
 };
 
 &am33xx_pinmux {
-	user_leds: user_leds {
+	user_leds: user-leds-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT, MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */
 			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT, MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */
@@ -163,7 +163,7 @@
 		>;
 	};
 
-	mmc0_pins_default: mmc0_pins_default {
+	mmc0_pins_default: mmc0-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -174,14 +174,14 @@
 		>;
 	};
 
-	i2c0_pins_default: i2c0_pins_default {
+	i2c0_pins_default: i2c0-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
 		>;
 	};
 
-	spi0_pins_default: spi0_pins_default {
+	spi0_pins_default: spi0-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -192,14 +192,14 @@
 		>;
 	};
 
-	uart3_pins_default: uart3_pins_default {
+	uart3_pins_default: uart3-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLUP, MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
 		>;
 	};
 
-	cpsw_default: cpsw_default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Slave 1, RMII mode */
 			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
@@ -222,7 +222,7 @@
 		>;
 	};
 
-	cpsw_sleep: cpsw_sleep {
+	cpsw_sleep: cpsw-sleep-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
 			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -246,7 +246,7 @@
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
+	davinci_mdio_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			/* MDIO */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
@@ -254,7 +254,7 @@
 		>;
 	};
 
-	davinci_mdio_sleep: davinci_mdio_sleep {
+	davinci_mdio_sleep: davinci-mdio-sleep-pins {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -360,7 +360,7 @@
 	};
 };
 
-#include "tps65910.dtsi"
+#include "../../tps65910.dtsi"
 
 &tps {
 	vcc1-supply = <&vbat>;
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/ti/omap/am335x-igep0033.dtsi
index cc14415a4eb9..c7a4a5476489 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-igep0033.dtsi
@@ -2,7 +2,7 @@
 /*
  * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
  *
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ * Copyright (C) 2013 ISEE 2007 SL - https://www.isee.biz
  */
 
 /dts-v1/;
@@ -52,14 +52,14 @@
 };
 
 &am33xx_pinmux {
-	i2c0_pins: pinmux_i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
-	nandflash_pins: pinmux_nandflash_pins {
+	nandflash_pins: nandflash-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -79,14 +79,14 @@
 		>;
 	};
 
-	uart0_pins: pinmux_uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	leds_pins: pinmux_leds_pins {
+	leds_pins: leds-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a7.gpio1_23 */
 		>;
@@ -168,7 +168,7 @@
 		/* MTD partition table */
 		partition@0 {
 			label = "SPL";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 
 		partition@1 {
@@ -188,7 +188,7 @@
 
 		partition@4 {
 			label = "File System";
-			reg = <0x00780000 0x007880000>;
+			reg = <0x00780000 0x07880000>;
 		};
 	};
 };
@@ -221,7 +221,7 @@
 	dr_mode = "host";
 };
 
-#include "tps65910.dtsi"
+#include "../../tps65910.dtsi"
 
 &tps {
 	vcc1-supply = <&vbat>;
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/ti/omap/am335x-lxm.dts
index 1282dae144dd..be27b5a21b2c 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-lxm.dts
@@ -41,7 +41,7 @@
 };
 
 &am33xx_pinmux {
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -52,14 +52,14 @@
 		>;
 	};
 
-	i2c0_pins: pinmux_i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
 		>;
 	};
 
-	cpsw_default: cpsw_default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_int */
@@ -85,7 +85,7 @@
 		>;
 	};
 
-	cpsw_sleep: cpsw_sleep {
+	cpsw_sleep: cpsw-sleep-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_int */
@@ -111,7 +111,7 @@
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
+	davinci_mdio_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			/* MDIO */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
@@ -119,7 +119,7 @@
 		>;
 	};
 
-	davinci_mdio_sleep: davinci_mdio_sleep {
+	davinci_mdio_sleep: davinci-mdio-sleep-pins {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -127,7 +127,7 @@
 		>;
 	};
 
-	emmc_pins: pinmux_emmc_pins {
+	emmc_pins: emmc-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
@@ -142,7 +142,7 @@
 		>;
 	};
 
-	uart0_pins: pinmux_uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
@@ -177,7 +177,7 @@
 	};
 };
 
-/include/ "tps65910.dtsi"
+/include/ "../../tps65910.dtsi"
 
 &tps {
 	vcc1-supply = <&vbat>;
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi
index 7b40ca9483ca..a59331aa58e5 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi
@@ -16,11 +16,11 @@
 
 	/* Power supply provides a fixed 3.3V @3A */
 	vmmcsd_fixed: vmmcsd-regulator {
-	      compatible = "regulator-fixed";
-	      regulator-name = "vmmcsd_fixed";
-	      regulator-min-microvolt = <3300000>;
-	      regulator-max-microvolt = <3300000>;
-	      regulator-boot-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
 	};
 
 	buttons: push_button {
@@ -31,27 +31,27 @@
 &am33xx_pinmux {
 	pinctrl-names = "default";
 
-	i2c0_pins: pinmux_i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
-	push_button_pins: pinmux_push_button {
+	push_button_pins: push-button-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* lcd_hsync.gpio2_23 */
 		>;
 	};
 
-	uart0_pins: pinmux_uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
+	davinci_mdio_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			/* MDIO */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
@@ -59,7 +59,7 @@
 		>;
 	};
 
-	mmc1_pins_default: pinmux_mmc1_pins {
+	mmc1_pins_default: mmc1-pins {
 		pinctrl-single,pins = <
 			/* eMMC */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad12.mmc1_dat0 */
@@ -75,7 +75,7 @@
 		>;
 	};
 
-	spi0_pins: pinmux_spi0 {
+	spi0_pins: spi0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -217,7 +217,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi1_pins>;
 
-	tpm_spi_tis@0 {
+	tpm@0 {
 		compatible = "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <500000>;
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts b/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2101.dts
index 1cc513ed92cc..e986945ac1b5 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2101.dts
@@ -28,7 +28,7 @@
 &am33xx_pinmux {
 	pinctrl-names = "default";
 
-	cpsw_default: cpsw_default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 */
 			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
@@ -42,7 +42,7 @@
 		>;
 	};
 
-	spi1_pins: pinmux_spi1 {
+	spi1_pins: spi1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4)	 /* ecap0_in_pwm0_out.spi1_sclk */
 			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE4)	 /* uart1_ctsn.spi1_cs0 */
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-8100-common.dtsi
index e0364adb8393..daaa5eee0f0d 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-8100-common.dtsi
@@ -21,11 +21,11 @@
 
 	/* Power supply provides a fixed 3.3V @3A */
 	vmmcsd_fixed: vmmcsd-regulator {
-	      compatible = "regulator-fixed";
-	      regulator-name = "vmmcsd_fixed";
-	      regulator-min-microvolt = <3300000>;
-	      regulator-max-microvolt = <3300000>;
-	      regulator-boot-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
 	};
 
 	buttons: push_button {
@@ -38,7 +38,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&minipcie_pins>;
 
-	minipcie_pins: pinmux_minipcie {
+	minipcie_pins: minipcie-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* lcd_pclk.gpio2_24 */
 			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* lcd_ac_bias_en.gpio2_25 */
@@ -46,13 +46,13 @@
 		>;
 	};
 
-	push_button_pins: pinmux_push_button {
+	push_button_pins: push-button-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_ahcklx.gpio3_21 */
 		>;
 	};
 
-	i2c0_pins: pinmux_i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -60,21 +60,21 @@
 	};
 
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart0_ctsn.i2c1_sda */
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart0_rtsn.i2c1_scl */
 		>;
 	};
 
-	uart0_pins: pinmux_uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart1_pins: pinmux_uart1_pins {
+	uart1_pins: uart1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
@@ -83,7 +83,7 @@
 		>;
 	};
 
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE6)		/* lcd_data14.uart5_ctsn */
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT_PULLDOWN, MUX_MODE6)  /* lcd_data15.uart5_rtsn */
@@ -92,7 +92,7 @@
 		>;
 	};
 
-	cpsw_default: cpsw_default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 */
 			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
@@ -117,7 +117,7 @@
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
+	davinci_mdio_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			/* MDIO */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
@@ -125,7 +125,7 @@
 		>;
 	};
 
-	mmc0_pins_default: pinmux_mmc0_pins {
+	mmc0_pins_default: mmc0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -138,7 +138,7 @@
 		>;
 	};
 
-	mmc2_pins_default: pinmux_mmc2_pins {
+	mmc2_pins_default: mmc2-pins {
 		pinctrl-single,pins = <
 			/* eMMC */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad12.mmc2_dat0 */
@@ -154,7 +154,7 @@
 		>;
 	};
 
-	spi0_pins: pinmux_spi0 {
+	spi0_pins: spi0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -233,7 +233,7 @@
 };
 
 
-#include "tps65910.dtsi"
+#include "../../tps65910.dtsi"
 &tps {
 	vcc1-supply = <&vbat>;
 	vcc2-supply = <&vbat>;
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-8100-me-t.dts
index 0c7949d21bd9..0c7949d21bd9 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-8100-me-t.dts
diff --git a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myc.dtsi
index 6eea18b29355..9c9359844a20 100644
--- a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myc.dtsi
@@ -2,7 +2,7 @@
 /* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */
 
 /* Based on code by myc_c335x.dts, MYiRtech.com */
-/* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */
+/* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */
 
 /dts-v1/;
 
@@ -127,6 +127,7 @@
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-pin = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		ti,elm-id = <&elm>;
@@ -159,21 +160,21 @@
 };
 
 &am33xx_pinmux {
-	mdio_pins_default: pinmux_mdio_pins_default {
+	mdio_pins_default: mdio-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)	/* mdio_data */
 			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)			/* mdio_clk */
 		>;
 	};
 
-	mdio_pins_sleep: pinmux_mdio_pins_sleep {
+	mdio_pins_sleep: mdio-sleep-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
-	eth_slave1_pins_default: pinmux_eth_slave1_pins_default {
+	eth_slave1_pins_default: eth-slave1-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_tctl */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_rctl */
@@ -190,7 +191,7 @@
 		>;
 	};
 
-	eth_slave1_pins_sleep: pinmux_eth_slave1_pins_sleep {
+	eth_slave1_pins_sleep: eth-slave1-sleep-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -207,34 +208,34 @@
 		>;
 	};
 
-	i2c0_pins_default: pinmux_i2c0_pins_default {
+	i2c0_pins_default: i2c0-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE0)	/* I2C0_SDA */
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE0)	/* I2C0_SCL */
 		>;
 	};
 
-	i2c0_pins_gpio: pinmux_i2c0_pins_gpio {
+	i2c0_pins_gpio: i2c0-gpio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE7)			/* gpio3[5] */
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE7)			/* gpio3[6] */
 		>;
 	};
 
-	i2c0_pins_sleep: pinmux_i2c0_pins_sleep {
+	i2c0_pins_sleep: i2c0-sleep-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
-	led_mod_pins: pinmux_led_mod_pins {
+	led_mod_pins: led-mod-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE7)		/* gpio3[18] */
 		>;
 	};
 
-	nand_pins_default: pinmux_nand_pins_default {
+	nand_pins_default: nand-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_ad0 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_ad1 */
@@ -254,7 +255,7 @@
 		>;
 	};
 
-	nand_pins_sleep: pinmux_nand_pins_sleep {
+	nand_pins_sleep: nand-sleep-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
diff --git a/arch/arm/boot/dts/am335x-myirtech-myd.dts b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts
index 9d81d4cc6890..06a352f98b22 100644
--- a/arch/arm/boot/dts/am335x-myirtech-myd.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */
 /* Based on code by myd_c335x.dts, MYiRtech.com */
-/* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */
+/* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */
 
 /dts-v1/;
 
@@ -143,7 +143,7 @@
 
 	sgtl5000: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
-		reg =<0xa>;
+		reg = <0xa>;
 		clocks = <&clk12m>;
 		micbias-resistor-k-ohms = <4>;
 		micbias-voltage-m-volts = <2250>;
@@ -155,14 +155,19 @@
 
 	tda9988: tda9988@70 {
 		compatible = "nxp,tda998x";
-		reg =<0x70>;
+		reg = <0x70>;
 		audio-ports = <TDA998x_I2S 1>;
 
 		#sound-dai-cells = <0>;
 
 		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
 			port@0 {
-				hdmi_0: endpoint@0 {
+				reg = <0>;
+
+				hdmi_0: endpoint {
 					remote-endpoint = <&lcdc_0>;
 				};
 			};
@@ -299,47 +304,47 @@
 };
 
 &am33xx_pinmux {
-	dcan0_pins_default: pinmux_dcan0_pins_default {
+	dcan0_pins_default: dcan0-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2)			/* dcan0_tx_mux2 */
 			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT, MUX_MODE2)			/* dcan0_rx_mux2 */
 		>;
 	};
 
-	dcan0_pins_sleep: pinmux_dcan0_pins_sleep {
+	dcan0_pins_sleep: dcan0-sleep-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
-	dcan1_pins_default: pinmux_dcan1_pins_default {
+	dcan1_pins_default: dcan1-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)			/* dcan1_tx_mux0 */
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)			/* dcan1_rx_mux0 */
 		>;
 	};
 
-	dcan1_pins_sleep: pinmux_dcan1_pins_sleep {
+	dcan1_pins_sleep: dcan1-sleep-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
-	ehrpwm0_pins_default: pinmux_ehrpwm0_pins_default {
+	ehrpwm0_pins_default: ehrpwm0-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_OUTPUT, MUX_MODE3)			/* ehrpwm0A_mux1 */
 		>;
 	};
 
-	ehrpwm0_pins_sleep: pinmux_ehrpwm0_pins_sleep {
+	ehrpwm0_pins_sleep: ehrpwm0-sleep-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
-	eth_slave2_pins_default: pinmux_eth_slave2_pins_default {
+	eth_slave2_pins_default: eth-slave2-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_tctl */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_rctl */
@@ -356,7 +361,7 @@
 		>;
 	};
 
-	eth_slave2_pins_sleep: pinmux_eth_slave2_pins_sleep {
+	eth_slave2_pins_sleep: eth-slave2-sleep-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -373,35 +378,35 @@
 		>;
 	};
 
-	gpio_buttons_pins: pinmux_gpio_buttons_pins {
+	gpio_buttons_pins: gpio-buttons-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* gpio3[0] */
 			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT, MUX_MODE7)			/* gpio0[29] */
 		>;
 	};
 
-	i2c1_pins_default: pinmux_i2c1_pins_default {
+	i2c1_pins_default: i2c1-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE2)	/* I2C1_SDA_mux3 */
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE2)	/* I2C1_SCL_mux3 */
 		>;
 	};
 
-	i2c1_pins_gpio: pinmux_i2c1_pins_gpio {
+	i2c1_pins_gpio: i2c1-gpio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE7)			/* gpio0[4] */
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE7)			/* gpio0[5] */
 		>;
 	};
 
-	i2c1_pins_sleep: pinmux_i2c1_pins_sleep {
+	i2c1_pins_sleep: i2c1-sleep-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLDOWN, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
-	lcdc_pins_default: pinmux_lcdc_pins_default {
+	lcdc_pins_default: lcdc-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)			/* lcd_data0 */
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)			/* lcd_data1 */
@@ -426,7 +431,7 @@
 		>;
 	};
 
-	lcdc_pins_sleep: pinmux_lcdc_pins_sleep {
+	lcdc_pins_sleep: lcdc-sleep-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7)
@@ -451,14 +456,14 @@
 		>;
 	};
 
-	leds_pins: pinmux_leds_pins {
+	leds_pins: leds-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7)			/* gpio0[27] */
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE7)			/* gpio0[3] */
 		>;
 	};
 
-	mcasp0_pins_default: pinmux_mcasp0_pins_default {
+	mcasp0_pins_default: mcasp0-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)		/* mcasp0_aclkx_mux0 */
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)		/* mcasp0_fsx_mux0 */
@@ -467,7 +472,7 @@
 		>;
 	};
 
-	mcasp0_pins_sleep: pinmux_mcasp0_pins_sleep {
+	mcasp0_pins_sleep: mcasp0-sleep-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -476,7 +481,7 @@
 		>;
 	};
 
-	mmc1_pins_default: pinmux_mmc1_pins_default {
+	mmc1_pins_default: mmc1-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)		/* mmc0_dat3 */
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)		/* mmc0_dat2 */
@@ -488,7 +493,7 @@
 		>;
 	};
 
-	mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
+	mmc1_pins_sleep: mmc1-sleep-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLDOWN, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLDOWN, MUX_MODE0)
@@ -500,42 +505,42 @@
 		>;
 	};
 
-	uart0_pins: pinmux_uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)		/* uart0_rxd */
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* uart0_txd */
 		>;
 	};
 
-	uart1_pins_default: pinmux_uart1_pins_default {
+	uart1_pins_default: uart1-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)		/* uart1_rxd */
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* uart1_txd */
 		>;
 	};
 
-	uart1_pins_sleep: pinmux_uart1_pins_sleep {
+	uart1_pins_sleep: uart1-sleep-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLDOWN, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
-	uart2_pins_default: pinmux_uart2_pins_default {
+	uart2_pins_default: uart2-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT, MUX_MODE6)			/* uart2_rxd_mux1 */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_OUTPUT, MUX_MODE6)			/* uart2_txd_mux1 */
 		>;
 	};
 
-	uart2_pins_sleep: pinmux_uart2_pins_sleep {
+	uart2_pins_sleep: uart2-sleep-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
-	usb_pins: pinmux_usb_pins {
+	usb_pins: usb-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_USB0_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* USB0_DRVVBUS */
 			AM33XX_PADCONF(AM335X_PIN_USB1_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* USB1_DRVVBUS */
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/ti/omap/am335x-nano.dts
index b6f2567bd65a..d51cdd6e1ab4 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-nano.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
+ * Copyright (C) 2013 Newflow Ltd - https://www.newflow.co.uk/
  */
 /dts-v1/;
 
@@ -36,13 +36,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&misc_pins>;
 
-	misc_pins: misc_pins {
+	misc_pins: misc-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE7)	/* spi0_cs0.gpio0_5 */
 		>;
 	};
 
-	gpmc_pins: gpmc_pins {
+	gpmc_pins: gpmc-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -86,21 +86,21 @@
 		>;
 	};
 
-	i2c0_pins: i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart0_pins: uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT, MUX_MODE0)
 		>;
 	};
 
-	uart1_pins: uart1_pins {
+	uart1_pins: uart1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT, MUX_MODE7)
@@ -109,7 +109,7 @@
 		>;
 	};
 
-	uart2_pins: uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_INPUT_PULLUP, MUX_MODE7)	/* lcd_data8.gpio2[14] */
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE7)		/* lcd_data9.gpio2[15] */
@@ -118,32 +118,32 @@
 		>;
 	};
 
-	uart3_pins: uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_INPUT_PULLUP, MUX_MODE6)	/* lcd_data10.uart3_ctsn */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE6)		/* lcd_data11.uart3_rtsn */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_INPUT_PULLUP, MUX_MODE7)	/* lcd_data10.gpio2[16] */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE7)		/* lcd_data11.gpio2[17] */
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE1)		/* spi0_cs1.uart3_rxd */
 			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT, MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
 		>;
 	};
 
-	uart4_pins: uart4_pins {
+	uart4_pins: uart4-pins {
 		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT_PULLUP, MUX_MODE6)	/* lcd_data12.uart4_ctsn */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE6)		/* lcd_data13.uart4_rtsn */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT_PULLUP, MUX_MODE7)	/* lcd_data12.gpio0[8] */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE7)		/* lcd_data13.gpio0[9] */
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE1)		/* uart0_rtsn.uart4_txd */
 		>;
 	};
 
-	uart5_pins: uart5_pins {
+	uart5_pins: uart5-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE4)		/* lcd_data14.uart5_rxd */
 			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT, MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
 		>;
 	};
 
-	mmc1_pins: mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -167,7 +167,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>;
 	status = "okay";
-	rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+	rts-gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 	rs485-rts-active-high;
 	rs485-rx-during-tx;
 	rs485-rts-delay = <1 1>;
@@ -178,7 +178,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_pins>;
 	status = "okay";
-	rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+	rts-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
 	rs485-rts-active-high;
 	rs485-rts-delay = <1 1>;
 	linux,rs485-enabled-at-boot-time;
@@ -187,12 +187,22 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
+	rts-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rx-during-tx;
+	rs485-rts-delay = <1 1>;
+	linux,rs485-enabled-at-boot-time;
 	status = "okay";
 };
 
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins>;
+	rts-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rx-during-tx;
+	rs485-rts-delay = <1 1>;
+	linux,rs485-enabled-at-boot-time;
 	status = "okay";
 };
 
@@ -220,6 +230,11 @@
 		reg = <0x24>;
 	};
 
+	temperature-sensor@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
 	eeprom@53 {
 		compatible = "microchip,24c02", "atmel,24c02";
 		reg = <0x53>;
@@ -403,11 +418,16 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	bus-width = <4>;
-	cd-gpios = <&gpio3 8 0>;
-	wp-gpios = <&gpio3 18 0>;
+	cd-debounce-delay-ms = <5>;
+	cd-gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb0 {
+	dr_mode = "host";
 };
 
-#include "tps65217.dtsi"
+#include "../../tps65217.dtsi"
 
 &tps {
 	regulators {
diff --git a/arch/arm/boot/dts/ti/omap/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/ti/omap/am335x-netcan-plus-1xx.dts
new file mode 100644
index 000000000000..546e88f8fbad
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/am335x-netcan-plus-1xx.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * https://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+	model = "NetCAN";
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "can_data";
+			linux,default-trigger = "netdev";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led@2 {
+			label = "can_error";
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	user_leds_s0: user-leds-s0-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* CAN Data LED */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* CAN Error LED */
+		>;
+	};
+
+	dcan1_pins: dcan1-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)	/* CAN TX */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)	/* CAN RX */
+		>;
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&davinci_mdio_sw {
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
+	phy-handle = <&phy0>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+	phy-handle = <&phy1>;
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"NC",
+		"NC",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"can_data",
+		"can_error",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"NC",
+		"NC",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"NC",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"DCAN1_TX",
+		"DCAN1_RX",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SW2_0",
+		"SW2_1",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"SW2_2",
+		"SW2_3",
+		"NC",
+		"NC",
+		"NC",
+		"ModeA0",
+		"ModeA1",
+		"ModeA2",
+		"ModeA3",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts
new file mode 100644
index 000000000000..f66d57bb685e
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * https://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+	model = "NetCom Plus";
+};
+
+&am33xx_pinmux {
+	uart1_pins: uart1-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)			/* RX */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)			/* TX */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)		/* CTS */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* RTS */
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)		/* DTR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* DSR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* DCD */
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* RI */
+		>;
+	};
+
+	uart2_pins: uart2-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)		/* RX */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      		/* TX */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* CTS */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* RTS */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* DTR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* DSR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* DCD */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* RI */
+		>;
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&davinci_mdio_sw {
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
+	phy-handle = <&phy0>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+	phy-handle = <&phy1>;
+};
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"UART2_RX",
+		"UART2_TX",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART1_CTSN",
+		"UART1_RTSN",
+		"UART1_RX",
+		"UART1_TX",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"NC",
+		"NC",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"NC",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"NC",
+		"NC",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"UART2_DTR",
+		"UART2_DSR",
+		"UART2_DCD",
+		"UART2_RI",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SW2_0",
+		"SW2_1",
+		"NC",
+		"NC",
+		"UART1_DTR",
+		"UART1_DSR",
+		"UART1_DCD",
+		"UART1_RI",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART2_CTSN",
+		"UART2_RTSN",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"SW2_2",
+		"SW2_3",
+		"NC",
+		"NC",
+		"NC",
+		"ModeA0",
+		"ModeA1",
+		"ModeA2",
+		"ModeA3",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-8xx.dts
new file mode 100644
index 000000000000..5fb2c629f35c
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-8xx.dts
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * https://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+
+/ {
+	model = "NetCom Plus";
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dip_switches>;
+
+	dip_switches: dip-switches-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	tca6416_pins: tca6416-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+	};
+
+	i2c2_pins: i2c2-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
+		>;
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&i2c1 {
+	tca6416a: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tca6416_pins>;
+		gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
+				  "GP_IN4", "GP_IN5", "GP_IN6", "GP_IN7",
+				  "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
+				  "GP_OUT4", "GP_OUT5", "GP_OUT6", "GP_OUT7";
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tca6416b: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "CH1_M0", "CH1_M1", "CH1_M2", "CH1_M3",
+				  "CH2_M0", "CH2_M1", "CH2_M2", "CH2_M3",
+				  "CH3_M0", "CH3_M1", "CH3_M2", "CH3_M3",
+				  "CH4_M0", "CH4_M1", "CH4_M2", "CH4_M3";
+	};
+
+	tca6416c: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "CH5_M0", "CH5_M1", "CH5_M2", "CH5_M3",
+				  "CH6_M0", "CH6_M1", "CH6_M2", "CH6_M3",
+				  "CH7_M0", "CH7_M1", "CH7_M2", "CH7_M3",
+				  "CH8_M0", "CH8_M1", "CH8_M2", "CH8_M3";
+	};
+};
+
+&davinci_mdio_sw {
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
+	phy-handle = <&phy0>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+	phy-handle = <&phy1>;
+};
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"NC",
+		"NC",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"I2C2_SDA",
+		"I2C2_SCL",
+		"NC",
+		"NC",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"NC",
+		"NC",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"NC",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"NC",
+		"NC",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"SW2_0_alt",
+		"SW2_1_alt",
+		"SW2_2_alt",
+		"SW2_3_alt",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SW2_0",
+		"SW2_1",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"NC",
+		"NC",
+		"NC",
+		"3G_PWR_EN",
+		"NC",
+		"NC",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"SW2_2",
+		"SW2_3",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/ti/omap/am335x-osd3358-sm-red.dts
index b2846cd220f0..d28d39728847 100644
--- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-osd3358-sm-red.dts
@@ -239,25 +239,25 @@
 		>;
 	};
 
-	flash_enable: flash-enable {
+	flash_enable: flash-enable-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* rmii1_ref_clk.gpio0_29 */
 		>;
 	};
 
-	imu_interrupt: imu-interrupt {
+	imu_interrupt: imu-interrupt-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mii1_rx_er.gpio3_2 */
 		>;
 	};
 
-	ethernet_interrupt: ethernet-interrupt{
+	ethernet_interrupt: ethernet-interrupt-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mii1_col.gpio3_0 */
 		>;
 	};
 
-	user_leds_s0: user-leds-s0 {
+	user_leds_s0: user-leds-s0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
@@ -280,13 +280,13 @@
 		>;
 	};
 
-	clkout2_pin: pinmux-clkout2-pin {
+	clkout2_pin: pinmux-clkout2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 
-	cpsw_default: cpsw-default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 */
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
@@ -304,7 +304,7 @@
 		>;
 	};
 
-	cpsw_sleep: cpsw-sleep {
+	cpsw_sleep: cpsw-sleep-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -322,7 +322,7 @@
 		>;
 	};
 
-	davinci_mdio_default: davinci-mdio-default {
+	davinci_mdio_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			/* MDIO */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
@@ -330,7 +330,7 @@
 		>;
 	};
 
-	davinci_mdio_sleep: davinci-mdio-sleep {
+	davinci_mdio_sleep: davinci-mdio-sleep-pins {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
diff --git a/arch/arm/boot/dts/am335x-osd335x-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-osd335x-common.dtsi
index 2888b15999ee..93a3af83feac 100644
--- a/arch/arm/boot/dts/am335x-osd335x-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-osd335x-common.dtsi
@@ -28,7 +28,8 @@
 	* the HW OPP table, the silicon looks like it is Revision 1.0 (ie the
 	* EFUSE_SMA register reads as all zeros).
 	*/
-	oppnitro-1000000000 {
+	opp-1000000000 {
+		/* OPP Nitro */
 		opp-supported-hw = <0x06 0x0100>;
 	};
 };
@@ -54,7 +55,7 @@
 	};
 };
 
-/include/ "tps65217.dtsi"
+/include/ "../../tps65217.dtsi"
 
 &tps {
 	interrupts = <7>; /* NMI */
diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/ti/omap/am335x-pcm-953.dtsi
index dae448040a97..75efe1cf1dd2 100644
--- a/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-pcm-953.dtsi
@@ -12,44 +12,40 @@
 	compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx";
 
 	/* Power */
-	regulators {
-		vcc3v3: fixedregulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
+	vcc3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
 
-		vcc1v8: fixedregulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
+	vcc1v8: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
 	};
 
 	/* User IO */
-	user_leds: user_leds {
+	user_leds: user-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_pins>;
 
 		user-led0 {
 			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
 			default-state = "on";
 		};
 
 		user-led1 {
 			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "gpio";
 			default-state = "on";
 		};
 	};
 
-	user_buttons: user_buttons {
+	user_buttons: user-buttons {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_buttons_pins>;
@@ -72,14 +68,14 @@
 };
 
 &am33xx_pinmux {
-	user_buttons_pins: pinmux_user_buttons {
+	user_buttons_pins: pinmux-user-buttons-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* emu0.gpio3_7 */
 			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* emu1.gpio3_8 */
 		>;
 	};
 
-	user_leds_pins: pinmux_user_leds {
+	user_leds_pins: pinmux-user-leds-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_csn1.gpio1_30 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_csn2.gpio1_31 */
@@ -89,7 +85,7 @@
 
 /* CAN */
 &am33xx_pinmux {
-	dcan1_pins: pinmux_dcan1 {
+	dcan1_pins: pinmux-dcan1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2)	/* uart1_rxd.dcan1_tx_mux2 */
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2)	/* uart1_txd.dcan1_rx_mux2 */
@@ -105,7 +101,7 @@
 
 /* Ethernet */
 &am33xx_pinmux {
-	ethernet1_pins: pinmux_ethernet1 {
+	ethernet1_pins: ethernet1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
@@ -146,7 +142,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&cb_gpio_pins>;
 
-	cb_gpio_pins: pinmux_cb_gpio {
+	cb_gpio_pins: pinmux-cb-gpio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* uart0_ctsn.gpio1_8 */
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* uart0_rtsn.gpio1_9 */
@@ -156,7 +152,7 @@
 
 /* MMC */
 &am33xx_pinmux {
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: pinmux-mmc1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -180,14 +176,14 @@
 
 /* UARTs */
 &am33xx_pinmux {
-	uart0_pins: pinmux_uart0 {
+	uart0_pins: pinmux-uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart1_pins: pinmux_uart1 {
+	uart1_pins: pinmux-uart1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
@@ -196,14 +192,14 @@
 		>;
 	};
 
-	uart2_pins: pinmux_uart2 {
+	uart2_pins: pinmux-uart2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_tx_clk.uart2_rxd */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rx_clk.uart2_txd */
 		>;
 	};
 
-	uart3_pins: pinmux_uart3 {
+	uart3_pins: pinmux-uart3-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_rxd3.uart3_rxd */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rxd2.uart3_txd */
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts
index ce6cc2b96654..c9ccb9de21ad 100644
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts
@@ -3,7 +3,7 @@
  *
  * EETS GmbH PDU001 board device tree file
  *
- * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
+ * Copyright (C) 2018 EETS GmbH - https://www.eets.ch/
  *
  * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
  *
@@ -67,7 +67,7 @@
 		};
 
 		display-timings {
-			240x320p16 {
+			timing-240x320p16 {
 				clock-frequency = <6500000>;
 				hactive = <240>;
 				vactive = <320>;
@@ -90,28 +90,28 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&clkout2_pin>;
 
-	i2c0_pins: pinmux_i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_d1.i2c1_sda */
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_cs0.i2c1_scl */
 		>;
 	};
 
-	i2c2_pins: pinmux_i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_clk.i2c2_sda */
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_d0.i2c2_scl */
 		>;
 	};
 
-	spi1_pins: pinmux_spi1_pins {
+	spi1_pins: spi1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT, MUX_MODE3)		/* mcasp0_aclkx.spi1_sclk */
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT, MUX_MODE3)		/* mcasp0_fsx.spi1_d0 */
@@ -120,7 +120,7 @@
 		>;
 	};
 
-	uart0_pins: pinmux_uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -128,27 +128,27 @@
 		>;
 	};
 
-	uart1_pins: pinmux_uart1_pins {
+	uart1_pins: uart1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE1)	/* spi0_cs1.uart3_rxd */
 			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* ecap0_in_pwm0_out.uart3_txd */
 		>;
 	};
 
-	clkout2_pin: pinmux_clkout2_pin {
+	clkout2_pin: clkout2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 
-	cpsw_default: cpsw_default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Port 1 (emac0) */
 			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT, MUX_MODE0)
@@ -186,14 +186,14 @@
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
+	davinci_mdio_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		/* eMMC */
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -205,7 +205,7 @@
 		>;
 	};
 
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		/* SD cardcage */
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
@@ -219,7 +219,7 @@
 		>;
 	};
 
-	lcd_pins_s0: lcd_pins_s0 {
+	lcd_pins_s0: lcd-s0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
@@ -244,7 +244,7 @@
 		>;
 	};
 
-	dcan0_pins: pinmux_dcan0_pins {
+	dcan0_pins: dcan0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
 			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
@@ -256,8 +256,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins>;
 
-	rts-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	rts-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 	rs485-rts-active-high;
+	rs485-rx-during-tx;
 	rs485-rts-delay = <0 0>;
 	linux,rs485-enabled-at-boot-time;
 
@@ -289,7 +290,7 @@
 		reg = <0x2d>;
 	};
 
-	m2_eeprom: m2_eeprom@50 {
+	m2_eeprom: eeprom@50 {
 		compatible = "atmel,24c256";
 		reg = <0x50>;
 		status = "okay";
@@ -303,12 +304,12 @@
 	status = "okay";
 	clock-frequency = <100000>;
 
-	board_24aa025e48: board_24aa025e48@50 {
+	board_24aa025e48: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
 	};
 
-	backplane_24aa025e48: backplane_24aa025e48@53 {
+	backplane_24aa025e48: eeprom@53 {
 		compatible = "atmel,24c02";
 		reg = <0x53>;
 	};
@@ -400,7 +401,7 @@
 	status = "okay";
 };
 
-#include "tps65910.dtsi"
+#include "../../tps65910.dtsi"
 
 &tps {
 	vcc1-supply = <&vbat>;
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/ti/omap/am335x-pepper.dts
index 8691eec33b61..e7d561a527fd 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-pepper.dts
@@ -26,7 +26,7 @@
 		compatible = "gpio-keys";
 	};
 
-	leds: user_leds {
+	leds: user-leds-pins {
 		compatible = "gpio-leds";
 	};
 
@@ -88,13 +88,13 @@
 };
 
 &am33xx_pinmux {
-	i2c0_pins: pinmux_i2c0 {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
-	i2c1_pins: pinmux_i2c1 {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE3)	/* mii1_crs,i2c1_sda */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE3)	/* mii1_rxerr,i2c1_scl */
@@ -125,7 +125,7 @@
 };
 
 &am33xx_pinmux {
-	accel_pins: pinmux_accel {
+	accel_pins: accel-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_INPUT, MUX_MODE7)   /* gpmc_wen.gpio2_4 */
 		>;
@@ -172,7 +172,7 @@
 };
 
 &am33xx_pinmux {
-	audio_pins: pinmux_audio {
+	audio_pins: audio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
@@ -202,7 +202,7 @@
 	};
 	display-timings {
 		native-mode = <&timing0>;
-		timing0: 480x272 {
+		timing0: timing-480x272 {
 			clock-frequency = <18400000>;
 			hactive = <480>;
 			vactive = <272>;
@@ -223,7 +223,7 @@
 };
 
 &am33xx_pinmux {
-	lcd_pins: pinmux_lcd {
+	lcd_pins: lcd-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
@@ -292,7 +292,7 @@
 };
 
 &am33xx_pinmux {
-	ethernet_pins: pinmux_ethernet {
+	ethernet_pins: ethernet-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
@@ -313,7 +313,7 @@
 		>;
 	};
 
-	mdio_pins: pinmux_mdio {
+	mdio_pins: mdio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
@@ -357,7 +357,7 @@
 
 
 &am33xx_pinmux {
-	sd_pins: pinmux_sd_card {
+	sd_pins: sd-card-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -368,7 +368,7 @@
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* spi0_cs1.gpio0_6 */
 		>;
 	};
-	emmc_pins: pinmux_emmc {
+	emmc_pins: emmc-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
@@ -384,7 +384,7 @@
 			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
 		>;
 	};
-	wireless_pins: pinmux_wireless {
+	wireless_pins: wireless-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a1.mmc2_dat0 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a2.mmc2_dat1 */
@@ -423,7 +423,7 @@
 	vin-supply = <&vbat>;
 };
 
-/include/ "tps65217.dtsi"
+/include/ "../../tps65217.dtsi"
 
 &tps {
 	backlight {
@@ -491,7 +491,7 @@
 };
 
 &am33xx_pinmux {
-	spi0_pins: pinmux_spi0 {
+	spi0_pins: spi0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -532,13 +532,13 @@
 };
 
 &am33xx_pinmux {
-	uart0_pins: pinmux_uart0 {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
-	uart1_pins: pinmux_uart1 {
+	uart1_pins: uart1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
@@ -555,15 +555,15 @@
 };
 
 &usb0 {
-        dr_mode = "host";
+	dr_mode = "host";
 };
 
 &usb1 {
-        dr_mode = "host";
+	dr_mode = "host";
 };
 
 &am33xx_pinmux {
-	usb_pins: pinmux_usb {
+	usb_pins: usb-pins {
 		pinctrl-single,pins = <
 			/* USB0 Over-Current (active low) */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE7)	/* gpmc_a9.gpio1_25 */
@@ -620,14 +620,14 @@
 };
 
 &am33xx_pinmux {
-	user_leds_pins: pinmux_user_leds {
+	user_leds_pins: user-leds-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a4.gpio1_20 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
 		>;
 	};
 
-	user_buttons_pins: pinmux_user_buttons {
+	user_buttons_pins: user-buttons-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_a7.gpio1_21 */
diff --git a/arch/arm/boot/dts/am335x-phycore-rdk.dts b/arch/arm/boot/dts/ti/omap/am335x-phycore-rdk.dts
index 43907d03e675..43907d03e675 100644
--- a/arch/arm/boot/dts/am335x-phycore-rdk.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-phycore-rdk.dts
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/ti/omap/am335x-phycore-som.dtsi
index e2cec1ffaa4c..84c15a44df6a 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-phycore-som.dtsi
@@ -14,6 +14,7 @@
 	aliases {
 		rtc0 = &i2c_rtc;
 		rtc1 = &rtc;
+		rtc2 = &tps;
 	};
 
 	cpus {
@@ -48,7 +49,7 @@
 
 /* EMMC */
 &am33xx_pinmux {
-	emmc_pins: pinmux_emmc_pins {
+	emmc_pins: pinmux-emmc-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
@@ -75,7 +76,7 @@
 
 /* Ethernet */
 &am33xx_pinmux {
-	ethernet0_pins: pinmux_ethernet0 {
+	ethernet0_pins: ethernet0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE1)
@@ -88,7 +89,7 @@
 		>;
 	};
 
-	mdio_pins: pinmux_mdio {
+	mdio_pins: mdio-pins {
 		pinctrl-single,pins = <
 			/* MDIO */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
@@ -124,7 +125,7 @@
 
 /* I2C Busses */
 &am33xx_pinmux {
-	i2c0_pins: pinmux_i2c0 {
+	i2c0_pins: pinmux-i2c0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
@@ -164,7 +165,7 @@
 
 /* NAND memory */
 &am33xx_pinmux {
-		nandflash_pins: pinmux_nandflash {
+		nandflash_pins: pinmux-nandflash-pins {
 			pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -202,7 +203,6 @@
 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
-		gpmc,device-nand = "true";
 		gpmc,device-width = <1>;
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
@@ -233,7 +233,7 @@
 };
 
 /* Power */
-#include "tps65910.dtsi"
+#include "../../tps65910.dtsi"
 
 &tps {
 	vcc1-supply = <&vcc5v>;
@@ -316,7 +316,7 @@
 
 /* SPI Busses */
 &am33xx_pinmux {
-	spi0_pins: pinmux_spi0 {
+	spi0_pins: pinmux-spi0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0)
diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts
index 5e415d8ffdd8..78ce860e59b3 100644
--- a/arch/arm/boot/dts/am335x-pocketbeagle.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts
@@ -8,6 +8,7 @@
 
 #include "am33xx.dtsi"
 #include "am335x-osd335x-common.dtsi"
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "TI AM335x PocketBeagle";
@@ -23,29 +24,37 @@
 
 		compatible = "gpio-leds";
 
-		usr0 {
+		led-usr0 {
 			label = "beaglebone:green:usr0";
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		usr1 {
+		led-usr1 {
 			label = "beaglebone:green:usr1";
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
 			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		usr2 {
+		led-usr2 {
 			label = "beaglebone:green:usr2";
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_CPU;
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
 
-		usr3 {
+		led-usr3 {
 			label = "beaglebone:green:usr3";
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_INDICATOR;
 			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
@@ -112,7 +121,7 @@
 		"P2.24",
 		"P2.33",
 		"P2.22",
-		"P2.18",
+		"P2.18 [PRU0.15i]",
 		"NC",
 		"NC",
 		"P2.01 [PWM1A]",
@@ -208,13 +217,8 @@
 	compatible = "pinconf-single";
 	pinctrl-names = "default";
 
-	pinctrl-0 =   < &P2_03_gpio &P1_34_gpio &P2_19_gpio &P2_24_gpio
-			&P2_33_gpio &P2_22_gpio &P2_18_gpio &P2_10_gpio
-			&P2_06_gpio &P2_04_gpio &P2_02_gpio &P2_08_gpio
-			&P2_17_gpio >;
-
 	/* P2_03 (ZCZ ball T10) gpio0_23 0x824 PIN 9 */
-	P2_03_gpio: pinmux_P2_03_gpio {
+	P2_03_gpio: P2-03-gpio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7)
 		>;
@@ -223,7 +227,7 @@
 	};
 
 	/* P1_34 (ZCZ ball T11) gpio0_26 0x828 PIN 10 */
-	P1_34_gpio: pinmux_P1_34_gpio {
+	P1_34_gpio: P1-34-gpio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE7)
 		>;
@@ -232,7 +236,7 @@
 	};
 
 	/* P2_19 (ZCZ ball U12) gpio0_27 0x82c PIN 11 */
-	P2_19_gpio: pinmux_P2_19_gpio {
+	P2_19_gpio: P2-19-gpio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE7)
 		>;
@@ -241,7 +245,7 @@
 	};
 
 	/* P2_24 (ZCZ ball T12) gpio1_12 0x830 PIN 12 */
-	P2_24_gpio: pinmux_P2_24_gpio {
+	P2_24_gpio: P2-24-gpio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7)
 		>;
@@ -250,7 +254,7 @@
 	};
 
 	/* P2_33 (ZCZ ball R12) gpio1_13 0x834 PIN 13 */
-	P2_33_gpio: pinmux_P2_33_gpio {
+	P2_33_gpio: P2-33-gpio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7)
 		>;
@@ -259,7 +263,7 @@
 	};
 
 	/* P2_22 (ZCZ ball V13) gpio1_14 0x838 PIN 14 */
-	P2_22_gpio: pinmux_P2_22_gpio {
+	P2_22_gpio: P2-22-gpio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7)
 		>;
@@ -267,17 +271,17 @@
 		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
 	};
 
-	/* P2_18 (ZCZ ball U13) gpio1_15 0x83c PIN 15 */
-	P2_18_gpio: pinmux_P2_18_gpio {
+	/* P2_20 (ZCZ ball T13) gpio2_00 0x888 */
+	P2_20_gpio: P2-20-gpio-pins {
 		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE7)
 		>;
 		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
 		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
 	};
 
 	/* P2_10 (ZCZ ball R14) gpio1_20 0x850 PIN 20 */
-	P2_10_gpio: pinmux_P2_10_gpio {
+	P2_10_gpio: P2-10-gpio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLUP, MUX_MODE7)
 		>;
@@ -286,7 +290,7 @@
 	};
 
 	/* P2_06 (ZCZ ball U16) gpio1_25 0x864 PIN 25 */
-	P2_06_gpio: pinmux_P2_06_gpio {
+	P2_06_gpio: P2-06-gpio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLUP, MUX_MODE7)
 		>;
@@ -295,7 +299,7 @@
 	};
 
 	/* P2_04 (ZCZ ball T16) gpio1_26 0x868 PIN 26 */
-	P2_04_gpio: pinmux_P2_04_gpio {
+	P2_04_gpio: P2-04-gpio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLUP, MUX_MODE7)
 		>;
@@ -304,7 +308,7 @@
 	};
 
 	/* P2_02 (ZCZ ball V17) gpio1_27 0x86c PIN 27 */
-	P2_02_gpio: pinmux_P2_02_gpio {
+	P2_02_gpio: P2-02-gpio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLUP, MUX_MODE7)
 		>;
@@ -313,7 +317,7 @@
 	};
 
 	/* P2_08 (ZCZ ball U18) gpio1_28 0x878 PIN 30 */
-	P2_08_gpio: pinmux_P2_08_gpio {
+	P2_08_gpio: P2-08-gpio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
@@ -322,7 +326,7 @@
 	};
 
 	/* P2_17 (ZCZ ball V12) gpio2_1 0x88c PIN 35 */
-	P2_17_gpio: pinmux_P2_17_gpio {
+	P2_17_gpio: P2-17-gpio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE7)
 		>;
@@ -401,6 +405,27 @@
 			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* (U17) gpmc_wpn.uart4_txd */
 		>;
 	};
+
+	pru0_pins: pinmux-pru0-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE5)/* (D14) xdma_event_intr1.pr1_pru0_pru_r31_16 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE5)/* (A14) mcasp0_ahclkx.pr1_pru0_pru_r30_7 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE5)	/* (B12) mcasp0_acklr.pr1_pru0_pru_r30_4 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE5)	/* (B13) mcasp0_fsx.pr1_pru0_pru_r30_1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE6)	/* (U13) gpmc_ad15.pr1_pru0_pru_r31_15 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_OUTPUT_PULLDOWN, MUX_MODE5)	/* (D13) mcasp0_axr1.pr1_pru0_pru_r30_6 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE5)/* (C12) mcasp0_ahclkr.pr1_pru0_pru_r30_3 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_OUTPUT_PULLDOWN, MUX_MODE5)	/* (D12) mcasp0_axr0.pr1_pru0_pru_r30_2 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_OUTPUT_PULLDOWN, MUX_MODE5)	/* (C13) mcasp0_fsr.pr1_pru0_pru_r30_5 */
+		>;
+	};
+
+	pru1_pins: pinmux-pru1-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE5)/*(R6) lcd_ac_bias_en.pr1_pru1_pru_r30_11 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE5)	/* (V5) lcd_pclk.pr1_pru1_pru_r30_10 */
+		>;
+	};
 };
 
 &epwmss0 {
@@ -482,3 +507,17 @@
 &usb1 {
 	dr_mode = "host";
 };
+
+&pruss_tm {
+	status = "okay";
+};
+
+&pru0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pru0_pins>;
+};
+
+&pru1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pru1_pins>;
+};
diff --git a/arch/arm/boot/dts/am335x-regor-rdk.dts b/arch/arm/boot/dts/ti/omap/am335x-regor-rdk.dts
index 66a1360b83d5..66a1360b83d5 100644
--- a/arch/arm/boot/dts/am335x-regor-rdk.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-regor-rdk.dts
diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/ti/omap/am335x-regor.dtsi
index 7b3966ee51b9..287d209a0ea9 100644
--- a/arch/arm/boot/dts/am335x-regor.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-regor.dtsi
@@ -5,6 +5,9 @@
  *
  */
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+
 / {
 	model = "Phytec AM335x phyBOARD-REGOR";
 	compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx";
@@ -18,7 +21,7 @@
 	};
 
 	/* User IO */
-	user_leds: user_leds {
+	user_leds: user-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_pins>;
@@ -39,7 +42,7 @@
 
 /* User Leds */
 &am33xx_pinmux {
-	user_leds_pins: pinmux_user_leds {
+	user_leds_pins: pinmux-user-leds-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* lcd_hsync.gpio2_22 */
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_fsx.gpio3_15 */
@@ -49,7 +52,7 @@
 
 /* CAN Busses */
 &am33xx_pinmux {
-	dcan1_pins: pinmux_dcan1 {
+	dcan1_pins: pinmux-dcan1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2)	/* uart0_ctsn.d_can1_tx */
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2)	/* uart0_rtsn.d_can1_rx */
@@ -65,7 +68,7 @@
 
 /* Ethernet */
 &am33xx_pinmux {
-	ethernet1_pins: pinmux_ethernet1 {
+	ethernet1_pins: pinmux-ethernet1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a0.mii2_txen */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
@@ -108,7 +111,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&user_gpios_pins>;
 
-	user_gpios_pins: pinmux_user_gpios {
+	user_gpios_pins: pinmux-user-gpios-pins {
 		pinctrl-single,pins = <
 			/* DIGIN 1-4 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7)		/* gpmc_ad11.gpio0_27 */
@@ -126,7 +129,7 @@
 
 /* MMC */
 &am33xx_pinmux {
-	mmc1_pins: pinmux_mmc1 {
+	mmc1_pins: pinmux-mmc1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -155,14 +158,14 @@
 
 /* UARTs */
 &am33xx_pinmux {
-	uart0_pins: pinmux_uart0 {
+	uart0_pins: pinmux-uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart2_pins: pinmux_uart2 {
+	uart2_pins: pinmux-uart2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_tx_clk.uart2_rxd */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rx_clk.uart2_txd */
@@ -184,11 +187,11 @@
 
 /* RS485 - UART1 */
 &am33xx_pinmux {
-	uart1_rs485_pins: pinmux_uart1_rs485_pins {
+	uart1_rs485_pins: pinmux-uart1-rs485-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 };
@@ -198,4 +201,9 @@
 	pinctrl-0 = <&uart1_rs485_pins>;
 	status = "okay";
 	linux,rs485-enabled-at-boot-time;
+	/*
+	 * un-intuitively, yet with the default (active-high),
+	 * am335x RTS is high on idle and gets low on active !
+	 */
+	rs485-rts-active-low;
 };
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-common.dtsi
index f9b7e774ac48..a138eb356874 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-common.dtsi
@@ -4,7 +4,7 @@
  */
 
 &am33xx_pinmux {
-	cpsw_default: cpsw_default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 */
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
@@ -22,7 +22,7 @@
 		>;
 	};
 
-	cpsw_sleep: cpsw_sleep {
+	cpsw_sleep: cpsw-sleep-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -40,7 +40,7 @@
 		>;
 	};
 
-	usb_hub_ctrl: usb_hub_ctrl {
+	usb_hub_ctrl: usb-hub-ctrl-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)     /* rmii1_refclk.gpio0_29 */
 		>;
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts b/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-extended-wifi.dts
index a2676d10c24a..7c9f65126c63 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-extended-wifi.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2021 Sancloud Ltd
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
@@ -28,7 +28,7 @@
 };
 
 &am33xx_pinmux {
-	mmc3_pins: pinmux_mmc3_pins {
+	mmc3_pins: mmc3-pins {
 		pinctrl-single,pins = <
 			/* gpmc_a9.gpio1_25: RADIO_EN */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_OUTPUT_PULLUP, MUX_MODE7)
@@ -53,14 +53,14 @@
 		>;
 	};
 
-	bluetooth_pins: pinmux_bluetooth_pins {
+	bluetooth_pins: bluetooth-pins {
 		pinctrl-single,pins = <
 			/* event_intr0.gpio0_19 */
 			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE7)
 		>;
 	};
 
-	uart1_pins: pinmux_uart1_pins {
+	uart1_pins: uart1-pins {
 		pinctrl-single,pins = <
 			/* uart1_rxd */
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts b/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-lite.dts
index d6ef19311a91..c6c96f6182a8 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-lite.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  * Copyright (C) 2021 SanCloud Ltd
  */
 /dts-v1/;
@@ -19,7 +19,7 @@
 };
 
 &am33xx_pinmux {
-	bb_spi0_pins: pinmux_bb_spi0_pins {
+	bb_spi0_pins: bb-spi0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT, MUX_MODE0)
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe.dts
index efbe93135dbe..32669346cefe 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe.dts
@@ -17,13 +17,13 @@
 };
 
 &am33xx_pinmux {
-	mpu6050_pins: pinmux_mpu6050_pins {
+	mpu6050_pins: mpu6050-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE7)    /* uart0_ctsn.gpio1_8 */
 		>;
 	};
 
-	lps3331ap_pins: pinmux_lps3331ap_pins {
+	lps3331ap_pins: lps3331ap-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7)     /* gpmc_a10.gpio1_26 */
 		>;
diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/ti/omap/am335x-sbc-t335.dts
index 81e4453687ba..2841e95d9a09 100644
--- a/arch/arm/boot/dts/am335x-sbc-t335.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-sbc-t335.dts
@@ -2,7 +2,7 @@
 /*
  * am335x-sbc-t335.dts - Device Tree file for Compulab SBC-T335
  *
- * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - https://www.compulab.co.il/
  */
 
 #include "am335x-cm-t335.dts"
@@ -64,7 +64,7 @@
 
 &am33xx_pinmux {
 	/* Display */
-	lcd_pins_default: lcd_pins_default {
+	lcd_pins_default: lcd-default-pins {
 		pinctrl-single,pins = <
 			/* gpmc_ad8.lcd_data23 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)
@@ -105,7 +105,7 @@
 		>;
 	};
 
-	lcd_pins_sleep: lcd_pins_sleep {
+	lcd_pins_sleep: lcd-sleep-pins {
 		pinctrl-single,pins = <
 			/* gpmc_ad8.lcd_data23 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLDOWN, MUX_MODE7)
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/ti/omap/am335x-shc.dts
index c497200f9cb0..597482822608 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-shc.dts
@@ -169,7 +169,7 @@
 		reg = <0x24>;
 	};
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c32";
 		pagesize = <32>;
 		reg = <0x50>;
@@ -366,14 +366,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&clkout2_pin>;
 
-	clkout2_pin: pinmux_clkout2_pin {
+	clkout2_pin: clkout2-pins {
 		pinctrl-single,pins = <
 			/* xdma_event_intr1.clkout2 */
 			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT, MUX_MODE6)
 		>;
 	};
 
-	cpsw_default: cpsw_default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE0)
@@ -392,7 +392,7 @@
 		>;
 	};
 
-	cpsw_sleep: cpsw_sleep {
+	cpsw_sleep: cpsw-sleep-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -411,14 +411,14 @@
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
+	davinci_mdio_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
-	davinci_mdio_sleep: davinci_mdio_sleep {
+	davinci_mdio_sleep: davinci-mdio-sleep-pins {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -426,13 +426,13 @@
 		>;
 	};
 
-	ehrpwm1_pins: pinmux_ehrpwm1 {
+	ehrpwm1_pins: ehrpwm1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6) /* gpmc_a3.gpio1_19 */
 		>;
 	};
 
-	emmc_pins: pinmux_emmc_pins {
+	emmc_pins: emmc-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT, MUX_MODE2)
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)
@@ -447,20 +447,20 @@
 		>;
 	};
 
-	i2c0_pins: pinmux_i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE5)
 		>;
 	};
 
-	mmc3_pins: pinmux_mmc3_pins {
+	mmc3_pins: mmc3-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE3)
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE3)
@@ -471,7 +471,7 @@
 		>;
 	};
 
-	uart0_pins: pinmux_uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE0)
@@ -480,7 +480,7 @@
 		>;
 	};
 
-	uart1_pins: pinmux_uart1 {
+	uart1_pins: uart1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT, MUX_MODE0)
@@ -489,21 +489,21 @@
 		>;
 	};
 
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)
 		>;
 	};
 
-	uart4_pins: pinmux_uart4_pins {
+	uart4_pins: uart4-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)
 			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE6)
 		>;
 	};
 
-	user_leds_s0: user_leds_s0 {
+	user_leds_s0: user-leds-s0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE7)
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts
index 73b5d1a024bd..f3524e5ee43e 100644
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/
+ * Copyright (C) 2015 Toby Churchill - https://www.toby-churchill.com/
+ * url above is defunct
  */
 /dts-v1/;
 
@@ -108,7 +109,7 @@
 		audio_mclk_fixed: oscillator@0 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency  = <24576000>;	/* 24.576MHz */
+			clock-frequency = <24576000>;	/* 24.576MHz */
 		};
 
 		audio_mclk: audio_mclk_gate@0 {
@@ -213,7 +214,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&lwb_pins>;
 
-	audio_pins: pinmux_audio_pins {
+	audio_pins: audio-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
@@ -223,31 +224,31 @@
 		>;
 	};
 
-	audio_pa_pins: pinmux_audio_pa_pins {
+	audio_pa_pins: audio-pa-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* SoundPA_en - mcasp0_aclkr.gpio3_18 */
 		>;
 	};
 
-	audio_mclk_pins: pinmux_audio_mclk_pins {
+	audio_mclk_pins: audio-mclk-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a11.gpio1_27 */
 		>;
 	};
 
-	backlight0_pins: pinmux_backlight0_pins {
+	backlight0_pins: backlight0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE7)	/* gpmc_wen.gpio2_4 */
 		>;
 	};
 
-	backlight1_pins: pinmux_backlight1_pins {
+	backlight1_pins: backlight1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7)     /* gpmc_ad10.gpio0_26 */
 		>;
 	};
 
-	lcd_pins: pinmux_lcd_pins {
+	lcd_pins: lcd-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
@@ -272,7 +273,7 @@
 		>;
 	};
 
-	led_pins: pinmux_led_pins {
+	led_pins: led-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
@@ -281,42 +282,42 @@
 		>;
 	};
 
-	uart0_pins: pinmux_uart0_pins {
+	uart0_pins: uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart1_pins: pinmux_uart1_pins {
+	uart1_pins: uart1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart4_pins: pinmux_uart4_pins {
+	uart4_pins: uart4-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)	/* gpmc_wait0.uart4_rxd */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* gpmc_wpn.uart4_txd */
 		>;
 	};
 
-	i2c0_pins: pinmux_i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
-	i2c2_pins: pinmux_i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
 			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
 		>;
 	};
 
-	cpsw_default: cpsw_default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -335,7 +336,7 @@
 		>;
 	};
 
-	cpsw_sleep: cpsw_sleep {
+	cpsw_sleep: cpsw-sleep-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -354,7 +355,7 @@
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
+	davinci_mdio_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			/* MDIO */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
@@ -364,7 +365,7 @@
 		>;
 	};
 
-	davinci_mdio_sleep: davinci_mdio_sleep {
+	davinci_mdio_sleep: davinci-mdio-sleep-pins {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
@@ -372,19 +373,19 @@
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE7)		/* uart0_rtsn.gpio1_9 */
 		>;
 	};
 
-	emmc_pwrseq_pins: pinmux_emmc_pwrseq_pins {
+	emmc_pwrseq_pins: emmc-pwrseq-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a4.gpio1_20 */
 		>;
 	};
 
-	emmc_pins: pinmux_emmc_pins {
+	emmc_pins: emmc-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
@@ -399,20 +400,20 @@
 		>;
 	};
 
-	ehrpwm1_pins: pinmux_ehrpwm1a_pins {
+	ehrpwm1_pins: ehrpwm1a-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE6)	/* gpmc_a2.ehrpwm1a */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6)	/* gpmc_a3.ehrpwm1b */
 		>;
 	};
 
-	rtc0_irq_pins: pinmux_rtc0_irq_pins {
+	rtc0_irq_pins: rtc0-irq-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7)     /* gpmc_ad9.gpio0_23 */
 		>;
 	};
 
-	spi0_pins: pinmux_spi0_pins {
+	spi0_pins: spi0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)	/* SPI0_MOSI */
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)	/* SPI0_MISO */
@@ -422,7 +423,7 @@
 		>;
 	};
 
-	lwb_pins: pinmux_lwb_pins {
+	lwb_pins: lwb-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7)	/* nKbdInt - gpmc_ad12.gpio1_12 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7)	/* nKbdReset - gpmc_ad13.gpio1_13 */
@@ -597,7 +598,7 @@
 	};
 };
 
-#include "tps65217.dtsi"
+#include "../../tps65217.dtsi"
 
 &tps {
 	ti,pmic-shutdown-controller;
diff --git a/arch/arm/boot/dts/am335x-wega-rdk.dts b/arch/arm/boot/dts/ti/omap/am335x-wega-rdk.dts
index 866b5f0cbfbc..866b5f0cbfbc 100644
--- a/arch/arm/boot/dts/am335x-wega-rdk.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-wega-rdk.dts
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/ti/omap/am335x-wega.dtsi
index f957fea8208e..d0c290d7d062 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-wega.dtsi
@@ -8,8 +8,33 @@
 	model = "Phytec AM335x phyBOARD-WEGA";
 	compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
 
-	sound: sound_iface {
-		compatible = "ti,da830-evm-audio";
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "snd-wega";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_iface_main>;
+		simple-audio-card,frame-master = <&sound_iface_main>;
+		simple-audio-card,mclk-fs = <512>;
+		simple-audio-card,widgets =
+					"Line", "Line In",
+					"Line", "Line Out",
+					"Speaker", "Speaker";
+		simple-audio-card,routing =
+					"Line Out", "LLOUT",
+					"Line Out", "RLOUT",
+					"Speaker", "SPOP",
+					"Speaker", "SPOM",
+					"LINE1L", "Line In",
+					"LINE1R", "Line In";
+
+		sound_iface_main: simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tlv320aic3007>;
+		};
+
 	};
 
 	vcc3v3: fixedregulator1 {
@@ -23,7 +48,7 @@
 
 /* Audio */
 &am33xx_pinmux {
-	mcasp0_pins: pinmux_mcasp0 {
+	mcasp0_pins: pinmux-mcasp0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
@@ -36,6 +61,7 @@
 
 &i2c0 {
 	tlv320aic3007: tlv320aic3007@18 {
+		#sound-dai-cells = <0>;
 		compatible = "ti,tlv320aic3007";
 		reg = <0x18>;
 		AVDD-supply = <&vcc3v3>;
@@ -47,6 +73,7 @@
 };
 
 &mcasp0 {
+	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcasp0_pins>;
 	op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
@@ -59,23 +86,10 @@
 	status = "okay";
 };
 
-&sound {
-	ti,model = "AM335x-Wega";
-	ti,audio-codec = <&tlv320aic3007>;
-	ti,mcasp-controller = <&mcasp0>;
-	ti,audio-routing =
-		"Line Out",		"LLOUT",
-		"Line Out",		"RLOUT",
-		"LINE1L",		"Line In",
-		"LINE1R",		"Line In";
-	clocks = <&mcasp0_fck>;
-	clock-names = "mclk";
-	status = "okay";
-};
 
 /* CAN Busses */
 &am33xx_pinmux {
-	dcan1_pins: pinmux_dcan1 {
+	dcan1_pins: pinmux-dcan1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
@@ -91,7 +105,7 @@
 
 /* Ethernet */
 &am33xx_pinmux {
-	ethernet1_pins: pinmux_ethernet1 {
+	ethernet1_pins: pinmux-ethernet1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a0.mii2_txen */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
@@ -131,7 +145,7 @@
 
 /* MMC */
 &am33xx_pinmux {
-	mmc1_pins: pinmux_mmc1 {
+	mmc1_pins: pinmux-mmc1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -161,14 +175,14 @@
 
 /* UARTs */
 &am33xx_pinmux {
-	uart0_pins: pinmux_uart0 {
+	uart0_pins: pinmux-uart0-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart1_pins: pinmux_uart1_pins {
+	uart1_pins: pinmux-uart1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/am33xx-clocks.dtsi
index d34483ae1778..99b62c6b4ce8 100644
--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am33xx-clocks.dtsi
@@ -108,30 +108,31 @@
 		compatible = "ti,clksel";
 		reg = <0x664>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		ehrpwm0_tbclk: clock-ehrpwm0-tbclk {
+		ehrpwm0_tbclk: clock-ehrpwm0-tbclk@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "ehrpwm0_tbclk";
 			clocks = <&l4ls_gclk>;
-			ti,bit-shift = <0>;
 		};
 
-		ehrpwm1_tbclk: clock-ehrpwm1-tbclk {
+		ehrpwm1_tbclk: clock-ehrpwm1-tbclk@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "ehrpwm1_tbclk";
 			clocks = <&l4ls_gclk>;
-			ti,bit-shift = <1>;
 		};
 
-		ehrpwm2_tbclk: clock-ehrpwm2-tbclk {
+		ehrpwm2_tbclk: clock-ehrpwm2-tbclk@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "ehrpwm2_tbclk";
 			clocks = <&l4ls_gclk>;
-			ti,bit-shift = <2>;
 		};
 	};
 };
@@ -566,17 +567,19 @@
 		compatible = "ti,clksel";
 		reg = <0x52c>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		gfx_fclk_clksel_ck: clock-gfx-fclk-clksel {
+		gfx_fclk_clksel_ck: clock-gfx-fclk-clksel@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,mux-clock";
 			clock-output-names = "gfx_fclk_clksel_ck";
 			clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
-			ti,bit-shift = <1>;
 		};
 
-		gfx_fck_div_ck: clock-gfx-fck-div {
+		gfx_fck_div_ck: clock-gfx-fck-div@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "gfx_fck_div_ck";
@@ -589,30 +592,32 @@
 		compatible = "ti,clksel";
 		reg = <0x700>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		sysclkout_pre_ck: clock-sysclkout-pre {
+		sysclkout_pre_ck: clock-sysclkout-pre@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,mux-clock";
 			clock-output-names = "sysclkout_pre_ck";
 			clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
 		};
 
-		clkout2_div_ck: clock-clkout2-div {
+		clkout2_div_ck: clock-clkout2-div@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "clkout2_div_ck";
 			clocks = <&sysclkout_pre_ck>;
-			ti,bit-shift = <3>;
 			ti,max-div = <8>;
 		};
 
-		clkout2_ck: clock-clkout2 {
+		clkout2_ck: clock-clkout2@7 {
+			reg = <7>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "clkout2_ck";
 			clocks = <&clkout2_div_ck>;
-			ti,bit-shift = <7>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi
index 7da42a5b959c..18ad52e93955 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi
@@ -200,7 +200,7 @@
 			ranges = <0x0 0x9000 0x1000>;
 
 			uart0: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				compatible = "ti,am3352-uart";
 				clock-frequency = <48000000>;
 				reg = <0x0 0x1000>;
 				interrupts = <72>;
@@ -455,8 +455,8 @@
 			rtc: rtc@0 {
 				compatible = "ti,am3352-rtc", "ti,da830-rtc";
 				reg = <0x0 0x1000>;
-				interrupts = <75
-					      76>;
+				interrupts = <75>,
+					     <76>;
 			};
 		};
 
@@ -739,7 +739,7 @@
 				 * c0_tx_pend
 				 * c0_misc_pend
 				 */
-				interrupts = <40 41 42 43>;
+				interrupts = <40>, <41>, <42>, <43>;
 				ranges = <0 0 0x8000>;
 				syscon = <&scm_conf>;
 				status = "disabled";
@@ -779,7 +779,7 @@
 				syscon = <&scm_conf>;
 				status = "disabled";
 
-				interrupts = <40 41 42 43>;
+				interrupts = <40>, <41>, <42>, <43>;
 				interrupt-names = "rx_thresh", "rx", "tx", "misc";
 
 				ethernet-ports {
@@ -899,7 +899,7 @@
 				pruss_intc: interrupt-controller@20000 {
 					compatible = "ti,pruss-intc";
 					reg = <0x20000 0x2000>;
-					interrupts = <20 21 22 23 24 25 26 27>;
+					interrupts = <20>, <21>, <22>, <23>, <24>, <25>, <26>, <27>;
 					interrupt-names = "host_intr0", "host_intr1",
 							  "host_intr2", "host_intr3",
 							  "host_intr4", "host_intr5",
@@ -1108,7 +1108,7 @@
 			ranges = <0x0 0x22000 0x1000>;
 
 			uart1: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				compatible = "ti,am3352-uart";
 				clock-frequency = <48000000>;
 				reg = <0x0 0x1000>;
 				interrupts = <73>;
@@ -1139,7 +1139,7 @@
 			ranges = <0x0 0x24000 0x1000>;
 
 			uart2: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				compatible = "ti,am3352-uart";
 				clock-frequency = <48000000>;
 				reg = <0x0 0x1000>;
 				interrupts = <74>;
@@ -1457,10 +1457,10 @@
 
 			gpio1: gpio@0 {
 				compatible = "ti,omap4-gpio";
-				gpio-ranges =   <&am33xx_pinmux  0  0  8>,
-						<&am33xx_pinmux  8 90  4>,
-						<&am33xx_pinmux 12 12 16>,
-						<&am33xx_pinmux 28 30  4>;
+				gpio-ranges = <&am33xx_pinmux  0  0  8>,
+					      <&am33xx_pinmux  8 90  4>,
+					      <&am33xx_pinmux 12 12 16>,
+					      <&am33xx_pinmux 28 30  4>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -1502,8 +1502,7 @@
 			mmc1: mmc@0 {
 				compatible = "ti,am335-sdhci";
 				ti,needs-special-reset;
-				dmas = <&edma_xbar 24 0 0
-					&edma_xbar 25 0 0>;
+				dmas = <&edma 24 0>, <&edma 25 0>;
 				dma-names = "tx", "rx";
 				interrupts = <64>;
 				reg = <0x0 0x1000>;
@@ -1771,7 +1770,7 @@
 			ranges = <0x0 0xa6000 0x1000>;
 
 			uart3: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				compatible = "ti,am3352-uart";
 				clock-frequency = <48000000>;
 				reg = <0x0 0x1000>;
 				interrupts = <44>;
@@ -1800,7 +1799,7 @@
 			ranges = <0x0 0xa8000 0x1000>;
 
 			uart4: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				compatible = "ti,am3352-uart";
 				clock-frequency = <48000000>;
 				reg = <0x0 0x1000>;
 				interrupts = <45>;
@@ -1829,7 +1828,7 @@
 			ranges = <0x0 0xaa000 0x1000>;
 
 			uart5: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				compatible = "ti,am3352-uart";
 				clock-frequency = <48000000>;
 				reg = <0x0 0x1000>;
 				interrupts = <46>;
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/ti/omap/am33xx.dtsi
index 32d397b3950b..43ec2a95f4bb 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am33xx.dtsi
@@ -80,64 +80,74 @@
 		 * because the can not be enabled simultaneously on a
 		 * single SoC.
 		 */
-		opp50-300000000 {
+		opp-50-300000000 {
+			/* OPP50 */
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <950000 931000 969000>;
 			opp-supported-hw = <0x06 0x0010>;
 			opp-suspend;
 		};
 
-		opp100-275000000 {
+		opp-100-275000000 {
+			/* OPP100-1 */
 			opp-hz = /bits/ 64 <275000000>;
 			opp-microvolt = <1100000 1078000 1122000>;
 			opp-supported-hw = <0x01 0x00FF>;
 			opp-suspend;
 		};
 
-		opp100-300000000 {
+		opp-100-300000000 {
+			/* OPP100-2 */
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <1100000 1078000 1122000>;
 			opp-supported-hw = <0x06 0x0020>;
 			opp-suspend;
 		};
 
-		opp100-500000000 {
+		opp-100-500000000 {
+			/* OPP100-3 */
 			opp-hz = /bits/ 64 <500000000>;
 			opp-microvolt = <1100000 1078000 1122000>;
 			opp-supported-hw = <0x01 0xFFFF>;
 		};
 
-		opp100-600000000 {
+		opp-100-600000000 {
+			/* OPP100-4 */
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1100000 1078000 1122000>;
 			opp-supported-hw = <0x06 0x0040>;
 		};
 
-		opp120-600000000 {
+		opp-120-600000000 {
+			/* OPP120-1 */
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1200000 1176000 1224000>;
 			opp-supported-hw = <0x01 0xFFFF>;
 		};
 
-		opp120-720000000 {
+		opp-120-720000000 {
+			/* OPP120-2 */
 			opp-hz = /bits/ 64 <720000000>;
 			opp-microvolt = <1200000 1176000 1224000>;
 			opp-supported-hw = <0x06 0x0080>;
 		};
 
-		oppturbo-720000000 {
+		opp-720000000 {
+			/* OPP Turbo-1 */
 			opp-hz = /bits/ 64 <720000000>;
 			opp-microvolt = <1260000 1234800 1285200>;
 			opp-supported-hw = <0x01 0xFFFF>;
 		};
 
-		oppturbo-800000000 {
+		opp-800000000 {
+			/* OPP Turbo-2 */
 			opp-hz = /bits/ 64 <800000000>;
 			opp-microvolt = <1260000 1234800 1285200>;
 			opp-supported-hw = <0x06 0x0100>;
 		};
 
-		oppnitro-1000000000 {
+		opp-1000000000 {
+			/* OPP Nitro */
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <1325000 1298500 1351500>;
 			opp-supported-hw = <0x04 0x0200>;
@@ -349,6 +359,7 @@
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
 					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-delay-us = <2>;
 			clocks = <&l3s_clkctrl AM3_L3S_USB_OTG_HS_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
@@ -450,10 +461,10 @@
 
 			cppi41dma: dma-controller@2000 {
 				compatible = "ti,am3359-cppi41";
-				reg =  <0x0000 0x1000>,
-				       <0x2000 0x1000>,
-				       <0x3000 0x1000>,
-				       <0x4000 0x4000>;
+				reg = <0x0000 0x1000>,
+				      <0x2000 0x1000>,
+				      <0x3000 0x1000>,
+				      <0x4000 0x4000>;
 				reg-names = "glue", "controller", "scheduler", "queuemgr";
 				interrupts = <17>;
 				interrupt-names = "glue";
@@ -629,10 +640,11 @@
 			#size-cells = <1>;
 			ranges = <0 0x56000000 0x1000000>;
 
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
+			gpu@0 {
+				compatible = "ti,omap3630-gpu", "img,powervr-sgx530";
+				reg = <0x0 0x10000>; /* 64kB */
+				interrupts = <37>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/ti/omap/am3517-craneboard.dts
index 3642cfc80194..d035c888731f 100644
--- a/arch/arm/boot/dts/am3517-craneboard.dts
+++ b/arch/arm/boot/dts/ti/omap/am3517-craneboard.dts
@@ -69,10 +69,10 @@
 	status = "disabled";
 };
 
-#include "tps65910.dtsi"
+#include "../../tps65910.dtsi"
 
 &omap3_pmx_core {
-	tps_pins: pinmux_tps_pins {
+	tps_pins: tps-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
 		>;
diff --git a/arch/arm/boot/dts/am3517-evm-ui.dtsi b/arch/arm/boot/dts/ti/omap/am3517-evm-ui.dtsi
index 75ad42179aee..16b8968d5be8 100644
--- a/arch/arm/boot/dts/am3517-evm-ui.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am3517-evm-ui.dtsi
@@ -197,7 +197,7 @@
 };
 
 &omap3_pmx_core {
-	mcbsp1_pins: pinmux_mcbsp1_pins {
+	mcbsp1_pins: mcbsp1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dx */
 			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dr */
@@ -206,7 +206,7 @@
 		>;
 	};
 
-	mcbsp2_pins: pinmux_mcbsp2_pins {
+	mcbsp2_pins: mcbsp2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
 			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/ti/omap/am3517-evm.dts
index 35b653014f2b..40f15da81043 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/am3517-evm.dts
@@ -26,12 +26,12 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-        vmmc_fixed: vmmc {
-                compatible = "regulator-fixed";
-                regulator-name = "vmmc_fixed";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-        };
+	vmmc_fixed: vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
 	gpio-keys {
 		compatible = "gpio-keys-polled";
@@ -150,7 +150,7 @@
 		enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
 	};
 
-	pwm11: dmtimer-pwm@11 {
+	pwm11: pwm-11 {
 		compatible = "ti,omap-dmtimer-pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm_pins>;
@@ -172,11 +172,24 @@
 &davinci_emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ethernet_pins>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
 	status = "okay";
 };
 
 &davinci_mdio {
-	     status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&enet_phy_pins>;
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;	/* gpio_58 */
+	};
 };
 
 &dss {
@@ -227,7 +240,7 @@
 };
 
 &mmc3 {
-      status = "disabled";
+	status = "disabled";
 };
 
 &usbhshost {
@@ -242,7 +255,7 @@
 
 &omap3_pmx_core {
 
-	ethernet_pins: pinmux_ethernet_pins {
+	ethernet_pins: ethernet-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
 			OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
@@ -257,28 +270,27 @@
 		>;
 	};
 
-	i2c2_pins: pinmux_i2c2_pins {
+	enet_phy_pins: ethernet-phy-pins {
 		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_scl */
-			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_sda */
+			OMAP3_CORE1_IOPAD(0x20bc, PIN_INPUT | MUX_MODE4)	/* gpmc_ncs7.gpio_57 */
 		>;
 	};
 
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_scl */
-			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_sda */
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_sda */
 		>;
 	};
 
-	leds_pins: pinmux_leds_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 */
-			OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu1.gpio_31 */
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_sda */
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
 			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
@@ -291,19 +303,19 @@
 		>;
 	};
 
-	pwm_pins: pinmux_pwm_pins {
+	pwm_pins: pwm-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE1)       /* mcspi2_cs0.gpt11_pwm */
 		>;
 	};
 
-	backlight_pins: pinmux_backlight_pins {
+	backlight_pins: backlight-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4)       /* mcspi2_cs1.gpio_182 */
 		>;
 	};
 
-	dss_dpi_pins: pinmux_dss_dpi_pins {
+	dss_dpi_pins: dss-dpi-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21d2, PIN_OUTPUT | MUX_MODE4)       /* mcspi1_cs2.gpio_176 */
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)       /* dss_pclk.dss_pclk */
@@ -329,7 +341,7 @@
 		>;
 	};
 
-	hsusb1_rst_pins: pinmux_hsusb1_rst_pins {
+	hsusb1_rst_pins: hsusb1-rst-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs6.gpio_57 */
 		>;
@@ -338,7 +350,7 @@
 
 &omap3_pmx_core2 {
 
-	hsusb1_pins: pinmux_hsusb1_pins {
+	hsusb1_pins: hsusb1-pins {
 		pinctrl-single,pins = <
 			OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)	/* etk_clk.hsusb1_stp */
 			OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)	/* etk_ctl.hsusb1_clk */
@@ -355,3 +367,12 @@
 		>;
 	};
 };
+
+&omap3_pmx_wkup {
+	leds_pins: leds-pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 */
+			OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu1.gpio_31 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/ti/omap/am3517-som.dtsi
index f7b680f6c48a..e36cd98f57fa 100644
--- a/arch/arm/boot/dts/am3517-som.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am3517-som.dtsi
@@ -44,7 +44,6 @@
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";
-		linux,mtd-name = "micron,mt29f4g16abchch";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
@@ -181,20 +180,20 @@
 
 &omap3_pmx_core {
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_scl */
 			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_sda */
 		>;
 	};
 
-	wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
+	wl12xx_buffer_pins: wl12xx-buffer-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */
 		>;
 	};
 
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_clk.mmc2_clk */
 			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_cmd.mmc2_cmd */
@@ -210,19 +209,19 @@
 		>;
 	};
 
-	rtc_pins: pinmux_rtc_pins {
+	rtc_pins: rtc-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */
 		>;
 	};
 
-	tsc2004_pins: pinmux_tsc2004_pins {
+	tsc2004_pins: tsc2004-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */
 		>;
 	};
 
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)		/* uart2_cts */
 			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* uart2_rts */
@@ -235,7 +234,7 @@
 
 &omap3_pmx_wkup {
 
-	wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
+	wl12xx_wkup_pins: wl12xx-wkup-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
 		>;
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/ti/omap/am3517.dtsi
index cb316135bc7c..19aad715dff7 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am3517.dtsi
@@ -15,6 +15,7 @@
 	aliases {
 		serial3 = &uart4;
 		can = &hecc;
+		ethernet = &davinci_emac;
 	};
 
 	cpus {
@@ -34,14 +35,16 @@
 		 * appear to operate at 300MHz as well. Since AM3517 only
 		 * lists one operating voltage, it will remain fixed at 1.2V
 		 */
-		opp50-300000000 {
+		opp-50-300000000 {
+			/* OPP50 */
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <1200000>;
 			opp-supported-hw = <0xffffffff 0xffffffff>;
 			opp-suspend;
 		};
 
-		opp100-600000000 {
+		opp-100-600000000 {
+			/* OPP100 */
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1200000>;
 			opp-supported-hw = <0xffffffff 0xffffffff>;
@@ -49,13 +52,35 @@
 	};
 
 	ocp@68000000 {
-		am35x_otg_hs: am35x_otg_hs@5c040000 {
-			compatible = "ti,omap3-musb";
-			ti,hwmods = "am35x_otg_hs";
-			status = "disabled";
-			reg = <0x5c040000 0x1000>;
-			interrupts = <71>;
-			interrupt-names = "mc";
+		target-module@5c040000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x5c040400 0x4>,
+			      <0x5c040404 0x4>,
+			      <0x5c040408 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&hsotgusb_ick_am35xx>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5c040000 0x1000>;
+
+			am35x_otg_hs: am35x_otg_hs@0 {
+				compatible = "ti,omap3-musb";
+				status = "disabled";
+				reg = <0 0x1000>;
+				interrupts = <71>;
+				interrupt-names = "mc";
+			};
 		};
 
 		davinci_emac: ethernet@5c000000 {
@@ -137,12 +162,13 @@
 			clock-names = "fck", "ick";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0 0x50000000 0x4000>;
+			ranges = <0 0x50000000 0x10000>;
 
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
+			gpu@0 {
+				compatible = "ti,omap3430-gpu", "img,powervr-sgx530";
+				reg = <0x0 0x10000>; /* 64kB */
+				interrupts = <21>;
+			};
 		};
 	};
 };
@@ -154,7 +180,7 @@
 };
 
 /* Table Table 5-79 of the TRM shows 480ab000 is reserved */
-&usb_otg_hs {
+&usb_otg_target {
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/ti/omap/am3517_mt_ventoux.dts
index e7d7124a34ba..e7d7124a34ba 100644
--- a/arch/arm/boot/dts/am3517_mt_ventoux.dts
+++ b/arch/arm/boot/dts/ti/omap/am3517_mt_ventoux.dts
diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/am35xx-clocks.dtsi
index 0ee7afaa0e8e..b521139e6f51 100644
--- a/arch/arm/boot/dts/am35xx-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am35xx-clocks.dtsi
@@ -66,22 +66,23 @@
 		compatible = "ti,clksel";
 		reg = <0xa10>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		ipss_ick: clock-ipss-ick {
+		ipss_ick: clock-ipss-ick@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,am35xx-interface-clock";
 			clock-output-names = "ipss_ick";
 			clocks = <&core_l3_ick>;
-			ti,bit-shift = <4>;
 		};
 
-		uart4_ick_am35xx: clock-uart4-ick-am35xx {
+		uart4_ick_am35xx: clock-uart4-ick-am35xx@23 {
+			reg = <23>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "uart4_ick_am35xx";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <23>;
 		};
 	};
 
@@ -101,14 +102,15 @@
 		compatible = "ti,clksel";
 		reg = <0xa00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		uart4_fck_am35xx: clock-uart4-fck-am35xx {
+		uart4_fck_am35xx: clock-uart4-fck-am35xx@23 {
+			reg = <23>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "uart4_fck_am35xx";
 			clocks = <&core_48m_fck>;
-			ti,bit-shift = <23>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/am3703.dtsi b/arch/arm/boot/dts/ti/omap/am3703.dtsi
index 2b994ae790c9..2b994ae790c9 100644
--- a/arch/arm/boot/dts/am3703.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am3703.dtsi
diff --git a/arch/arm/boot/dts/am3715.dtsi b/arch/arm/boot/dts/ti/omap/am3715.dtsi
index ab328e8c0bd8..ab328e8c0bd8 100644
--- a/arch/arm/boot/dts/am3715.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am3715.dtsi
diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/ti/omap/am3874-iceboard.dts
index d039af879367..bbb9200a1f26 100644
--- a/arch/arm/boot/dts/am3874-iceboard.dts
+++ b/arch/arm/boot/dts/ti/omap/am3874-iceboard.dts
@@ -106,7 +106,7 @@
 	 * "i2c-mux-idle-disconnect" is important.
 	 */
 
-	pca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -249,14 +249,14 @@
 			tmp100@4c { compatible = "ti,tmp100"; reg = <0x4c>; };
 
 			/* EEPROM bank and serial number are treated as separate devices */
-			at24c01@57 { compatible = "atmel,24c01"; reg = <0x57>; };
-			at24cs01@5f { compatible = "atmel,24cs01"; reg = <0x5f>; };
+			eeprom@57 { compatible = "atmel,24c01"; reg = <0x57>; };
+			eeprom@5f { compatible = "atmel,24cs01"; reg = <0x5f>; };
 		};
 	};
 };
 
 &i2c2 {
-	pca9548@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9548";
 		reg = <0x71>;
 		#address-cells = <1>;
@@ -270,8 +270,8 @@
 			multi-master;
 
 			/* All backplanes should have this -- it's how we know they're there. */
-			at24c08@54 { compatible="atmel,24c08"; reg=<0x54>; };
-			at24cs08@5c { compatible="atmel,24cs08"; reg=<0x5c>; };
+			eeprom@54 { compatible="atmel,24c08"; reg=<0x54>; };
+			eeprom@5c { compatible="atmel,24cs08"; reg=<0x5c>; };
 
 			/* 16 slot backplane */
 			tmp421@4d { compatible="ti,tmp421"; reg=<0x4d>; };
@@ -285,7 +285,7 @@
 };
 
 &pincntl {
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
 			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1)	/* SD1_CMD */
@@ -299,19 +299,19 @@
 			>;
 	};
 
-	usb0_pins: pinmux_usb0_pins {
+	usb0_pins: usb0-pins {
 		pinctrl-single,pins = <
 			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
 			>;
 	};
 
-	usb1_pins: pinmux_usb1_pins {
+	usb1_pins: usb1-pins {
 		pinctrl-single,pins = <
 			DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)	/* USB1_DRVVBUS */
 			>;
 	};
 
-	gpio1_pins: pinmux_gpio1_pins {
+	gpio1_pins: gpio1-pins {
 		pinctrl-single,pins = <
 			DM814X_IOPAD(0x081c, PIN_OUTPUT | 0x80)	/* PROGRAM_B */
 			DM814X_IOPAD(0x0820, PIN_INPUT | 0x80)	/* INIT_B */
@@ -336,7 +336,7 @@
 			>;
 	};
 
-	gpio2_pins: pinmux_gpio2_pins {
+	gpio2_pins: gpio2-pins {
 		pinctrl-single,pins = <
 			DM814X_IOPAD(0x090c, PIN_INPUT_PULLUP | 0x80) /* PHY A IRQ */
 			DM814X_IOPAD(0x0910, PIN_INPUT_PULLUP | 0x80) /* PHY A RESET */
@@ -349,7 +349,7 @@
 		>;
 	};
 
-	gpio4_pins: pinmux_gpio4_pins {
+	gpio4_pins: gpio4-pins {
 		pinctrl-single,pins = <
 			/* The PLL doesn't react well to the SPI controller reset, so
 			 * we force the CS lines to pull up as GPIOs until we're ready.
@@ -364,14 +364,14 @@
 		>;
 	};
 
-	spi2_pins: pinmux_spi2_pins {
+	spi2_pins: spi2-pins {
 		pinctrl-single,pins = <
 			DM814X_IOPAD(0x0950, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS1 as GPIO */
 			DM814X_IOPAD(0x0818, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS2 as GPIO */
 		>;
 	};
 
-	spi4_pins: pinmux_spi4_pins {
+	spi4_pins: spi4-pins {
 		pinctrl-single,pins = <
 			DM814X_IOPAD(0x0a7c, 0x20)
 			DM814X_IOPAD(0x0b74, 0x20)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/ti/omap/am4372.dtsi
index 8613355bbd5e..0a1df30f2818 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am4372.dtsi
@@ -70,32 +70,37 @@
 		compatible = "operating-points-v2-ti-cpu";
 		syscon = <&scm_conf>;
 
-		opp50-300000000 {
+		opp-50-300000000 {
+			/* OPP50 */
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <950000 931000 969000>;
 			opp-supported-hw = <0xFF 0x01>;
 			opp-suspend;
 		};
 
-		opp100-600000000 {
+		opp-100-600000000 {
+			/* OPP100 */
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1100000 1078000 1122000>;
 			opp-supported-hw = <0xFF 0x04>;
 		};
 
-		opp120-720000000 {
+		opp-120-720000000 {
+			/* OPP120 */
 			opp-hz = /bits/ 64 <720000000>;
 			opp-microvolt = <1200000 1176000 1224000>;
 			opp-supported-hw = <0xFF 0x08>;
 		};
 
-		oppturbo-800000000 {
+		opp-800000000 {
+			/* OPP Turbo */
 			opp-hz = /bits/ 64 <800000000>;
 			opp-microvolt = <1260000 1234800 1285200>;
 			opp-supported-hw = <0xFF 0x10>;
 		};
 
-		oppnitro-1000000000 {
+		opp-1000000000 {
+			/* OPP Nitro */
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <1325000 1298500 1351500>;
 			opp-supported-hw = <0xFF 0x20>;
@@ -714,6 +719,12 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x56000000 0x1000000>;
+
+			gpu@0 {
+				compatible = "ti,omap3630-gpu", "img,powervr-sgx530";
+				reg = <0x0 0x10000>; /* 64kB */
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/ti/omap/am437x-cm-t43.dts
index 0861e868b75a..e06fc30091c8 100644
--- a/arch/arm/boot/dts/am437x-cm-t43.dts
+++ b/arch/arm/boot/dts/ti/omap/am437x-cm-t43.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2015 CompuLab, Ltd. - https://www.compulab.co.il/
  */
 
 /dts-v1/;
@@ -38,20 +38,20 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&cm_t43_led_pins>;
 
-	cm_t43_led_pins: cm_t43_led_pins {
+	cm_t43_led_pins: cm-t43-led-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0xa78, MUX_MODE7)
 		>;
 	};
 
-	i2c0_pins: i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
 			AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 		>;
 	};
 
-	emmc_pins: emmc_pins {
+	emmc_pins: emmc-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0 */
 			AM4372_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1 */
@@ -66,7 +66,7 @@
 		>;
 	};
 
-	spi0_pins: pinmux_spi0_pins {
+	spi0_pins: spi0-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_sclk.spi0_sclk */
 			AM4372_IOPAD(0x954, PIN_INPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
@@ -75,7 +75,7 @@
 		>;
 	};
 
-	nand_flash_x8: nand_flash_x8 {
+	nand_flash_x8: nand-flash-x8-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x800, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
 			AM4372_IOPAD(0x804, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
@@ -95,7 +95,7 @@
 		>;
 	};
 
-	cpsw_default: cpsw_default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 */
 			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
@@ -128,7 +128,7 @@
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
+	davinci_mdio_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			/* MDIO */
 			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
@@ -254,7 +254,7 @@
 		};
 	};
 
-	eeprom_module: at24@50 {
+	eeprom_module: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
 		pagesize = <16>;
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/ti/omap/am437x-gp-evm.dts
index 46d5361fe876..f7aad0323d19 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/am437x-gp-evm.dts
@@ -153,45 +153,45 @@
 	pinctrl-0 = <&wlan_pins_default &ddr3_vtt_toggle_default &unused_pins &debugss_pins>;
 	pinctrl-1 = <&wlan_pins_sleep>;
 
-	ddr3_vtt_toggle_default: ddr_vtt_toggle_default {
+	ddr3_vtt_toggle_default: ddr-vtt-toggle-default-pins {
 		pinctrl-single,pins = <
 			0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) /* spi0_cs0.gpio5_7 */
 		>;
 	};
 
-	i2c0_pins: i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
 			AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 		>;
 	};
 
-	i2c1_pins: i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
 			AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
-	ecap0_pins: backlight_pins {
+	ecap0_pins: backlight-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x964, MUX_MODE0)       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
 		>;
 	};
 
-	pixcir_ts_pins: pixcir_ts_pins {
+	pixcir_ts_pins: pixcir-ts-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
 		>;
 	};
 
-	cpsw_default: cpsw_default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 */
 			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
@@ -209,7 +209,7 @@
 		>;
 	};
 
-	cpsw_sleep: cpsw_sleep {
+	cpsw_sleep: cpsw-sleep-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
 			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
@@ -227,7 +227,7 @@
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
+	davinci_mdio_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			/* MDIO */
 			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
@@ -235,7 +235,7 @@
 		>;
 	};
 
-	davinci_mdio_sleep: davinci_mdio_sleep {
+	davinci_mdio_sleep: davinci-mdio-sleep-pins {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
 			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
@@ -243,7 +243,7 @@
 		>;
 	};
 
-	nand_flash_x8: nand_flash_x8 {
+	nand_flash_x8: nand-flash-x8-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x800, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
 			AM4372_IOPAD(0x804, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
@@ -263,7 +263,7 @@
 		>;
 	};
 
-	dss_pins: dss_pins {
+	dss_pins: dss-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
 			AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
@@ -297,42 +297,42 @@
 		>;
 	};
 
-	display_mux_pins: display_mux_pins {
+	display_mux_pins: display-mux-pins {
 		pinctrl-single,pins = <
 			/* GPIO 5_8 to select LCD / HDMI */
 			AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7)
 		>;
 	};
 
-	dcan0_default: dcan0_default_pins {
+	dcan0_default: dcan0-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
 			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
 		>;
 	};
 
-	dcan0_sleep: dcan0_sleep_pins {
+	dcan0_sleep: dcan0-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_ctsn.gpio0_12 */
 			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_rtsn.gpio0_13 */
 		>;
 	};
 
-	dcan1_default: dcan1_default_pins {
+	dcan1_default: dcan1-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2)		/* uart1_rxd.d_can1_tx */
 			AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.d_can1_rx */
 		>;
 	};
 
-	dcan1_sleep: dcan1_sleep_pins {
+	dcan1_sleep: dcan1-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_rxd.gpio0_14 */
 			AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_txd.gpio0_15 */
 		>;
 	};
 
-	vpfe0_pins_default: vpfe0_pins_default {
+	vpfe0_pins_default: vpfe0-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
 			AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
@@ -350,7 +350,7 @@
 		>;
 	};
 
-	vpfe0_pins_sleep: vpfe0_pins_sleep {
+	vpfe0_pins_sleep: vpfe0-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
 			AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
@@ -368,7 +368,7 @@
 		>;
 	};
 
-	vpfe1_pins_default: vpfe1_pins_default {
+	vpfe1_pins_default: vpfe1-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
 			AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
@@ -386,7 +386,7 @@
 		>;
 	};
 
-	vpfe1_pins_sleep: vpfe1_pins_sleep {
+	vpfe1_pins_sleep: vpfe1-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
 			AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
@@ -404,7 +404,7 @@
 		>;
 	};
 
-	mmc3_pins_default: pinmux_mmc3_pins_default {
+	mmc3_pins_default: mmc3-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_clk.mmc2_clk */
 			AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_csn3.mmc2_cmd */
@@ -415,7 +415,7 @@
 		>;
 	};
 
-	mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
+	mmc3_pins_sleep: mmc3-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_clk.mmc2_clk */
 			AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.mmc2_cmd */
@@ -426,7 +426,7 @@
 		>;
 	};
 
-	wlan_pins_default: pinmux_wlan_pins_default {
+	wlan_pins_default: wlan-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
 			AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
@@ -434,7 +434,7 @@
 		>;
 	};
 
-	wlan_pins_sleep: pinmux_wlan_pins_sleep {
+	wlan_pins_sleep: wlan-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
 			AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
@@ -442,7 +442,7 @@
 		>;
 	};
 
-	uart3_pins: uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0)		/* uart3_rxd.uart3_rxd */
 			AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
@@ -451,7 +451,7 @@
 		>;
 	};
 
-	mcasp1_pins: mcasp1_pins {
+	mcasp1_pins: mcasp1-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
 			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
@@ -460,7 +460,7 @@
 		>;
 	};
 
-	mcasp1_sleep_pins: mcasp1_sleep_pins {
+	mcasp1_sleep_pins: mcasp1-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
@@ -469,13 +469,13 @@
 		>;
 	};
 
-	gpio0_pins: gpio0_pins {
+	gpio0_pins: gpio0-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
 		>;
 	};
 
-	emmc_pins_default: emmc_pins_default {
+	emmc_pins_default: emmc-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
 			AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
@@ -490,7 +490,7 @@
 		>;
 	};
 
-	emmc_pins_sleep: emmc_pins_sleep {
+	emmc_pins_sleep: emmc-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
 			AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
@@ -505,19 +505,19 @@
 		>;
 	};
 
-	beeper_pins_default: beeper_pins_default {
+	beeper_pins_default: beeper-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* cam1_field.gpio4_12 */
 		>;
 	};
 
-	beeper_pins_sleep: beeper_pins_sleep {
+	beeper_pins_sleep: beeper-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9e0, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* cam1_field.gpio4_12 */
 		>;
 	};
 
-	unused_pins: unused_pins {
+	unused_pins: unused-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
@@ -566,7 +566,7 @@
 		>;
 	};
 
-	debugss_pins: pinmux_debugss_pins {
+	debugss_pins: debugss-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0xa90, PIN_INPUT_PULLDOWN)
 			AM4372_IOPAD(0xa94, PIN_INPUT_PULLDOWN)
@@ -578,7 +578,7 @@
 		>;
 	};
 
-	uart0_pins_default: uart0_pins_default {
+	uart0_pins_default: uart0-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
 			AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
@@ -587,7 +587,7 @@
 		>;
 	};
 
-	uart0_pins_sleep: uart0_pins_sleep {
+	uart0_pins_sleep: uart0-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_ctsn.uart0_ctsn */
 			AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_rtsn.uart0_rtsn */
@@ -596,7 +596,7 @@
 		>;
 	};
 
-	matrix_keypad_default: matrix_keypad_default {
+	matrix_keypad_default: matrix-keypad-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7)
 			AM4372_IOPAD(0x9a8, PIN_OUTPUT | MUX_MODE7)
@@ -605,7 +605,7 @@
 		>;
 	};
 
-	matrix_keypad_sleep: matrix_keypad_sleep {
+	matrix_keypad_sleep: matrix-keypad-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9a4, PULL_UP | MUX_MODE7)
 			AM4372_IOPAD(0x9a8, PULL_UP | MUX_MODE7)
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts
index 123a95f87554..826f687c368a 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts
@@ -58,7 +58,7 @@
 		vin-supply = <&vdd_corereg>;
 	};
 
-	v1_8dreg: fixed-regulator-v1_8dreg{
+	v1_8dreg: fixed-regulator-v1_8dreg {
 		compatible = "regulator-fixed";
 		regulator-name = "V1_8DREG";
 		regulator-min-microvolt = <1800000>;
@@ -68,7 +68,7 @@
 		vin-supply = <&v24_0d>;
 	};
 
-	v1_8d: fixed-regulator-v1_8d{
+	v1_8d: fixed-regulator-v1_8d {
 		compatible = "regulator-fixed";
 		regulator-name = "V1_8D";
 		regulator-min-microvolt = <1800000>;
@@ -78,7 +78,7 @@
 		vin-supply = <&v1_8dreg>;
 	};
 
-	v1_5dreg: fixed-regulator-v1_5dreg{
+	v1_5dreg: fixed-regulator-v1_5dreg {
 		compatible = "regulator-fixed";
 		regulator-name = "V1_5DREG";
 		regulator-min-microvolt = <1500000>;
@@ -88,7 +88,7 @@
 		vin-supply = <&v24_0d>;
 	};
 
-	v1_5d: fixed-regulator-v1_5d{
+	v1_5d: fixed-regulator-v1_5d {
 		compatible = "regulator-fixed";
 		regulator-name = "V1_5D";
 		regulator-min-microvolt = <1500000>;
@@ -171,41 +171,41 @@
 };
 
 &am43xx_pinmux {
-	gpio_keys_pins_default: gpio_keys_pins_default {
+	gpio_keys_pins_default: gpio-keys-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9b8, PIN_INPUT | MUX_MODE7)	/* cam0_field.gpio4_2 */
 		>;
 	};
 
-	i2c0_pins_default: i2c0_pins_default {
+	i2c0_pins_default: i2c0-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
 			AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
 		>;
 	};
 
-	i2c0_pins_sleep: i2c0_pins_sleep {
+	i2c0_pins_sleep: i2c0-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			AM4372_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
-	i2c2_pins_default: i2c2_pins_default {
+	i2c2_pins_default: i2c2-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9e8, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
 			AM4372_IOPAD(0x9ec, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
 		>;
 	};
 
-	i2c2_pins_sleep: i2c2_pins_sleep {
+	i2c2_pins_sleep: i2c2-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			AM4372_IOPAD(0x9ec, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
-	mmc1_pins_default: pinmux_mmc1_pins_default {
+	mmc1_pins_default: mmc1-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
 			AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
@@ -217,7 +217,7 @@
 		>;
 	};
 
-	mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
+	mmc1_pins_sleep: mmc1-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x900, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			AM4372_IOPAD(0x904, PIN_INPUT_PULLDOWN | MUX_MODE7)
@@ -229,7 +229,7 @@
 		>;
 	};
 
-	spi1_pins_default: spi1_pins_default {
+	spi1_pins_default: spi1-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x908, PIN_INPUT | MUX_MODE2)	/* mii1_col.spi1_sclk */
 			AM4372_IOPAD(0x910, PIN_INPUT | MUX_MODE2)	/* mii1_rx_er.spi1_d1 */
@@ -238,7 +238,7 @@
 		>;
 	};
 
-	spi1_pins_sleep: spi1_pins_sleep {
+	spi1_pins_sleep: spi1-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
@@ -247,13 +247,13 @@
 		>;
 	};
 
-	ecap0_pins_default: backlight_pins_default {
+	ecap0_pins_default: backlight-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
 		>;
 	};
 
-	cpsw_default: cpsw_default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
 			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
@@ -270,7 +270,7 @@
 		>;
 	};
 
-	cpsw_sleep: cpsw_sleep {
+	cpsw_sleep: cpsw-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
@@ -287,7 +287,7 @@
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
+	davinci_mdio_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			/* MDIO */
 			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
@@ -295,7 +295,7 @@
 		>;
 	};
 
-	davinci_mdio_sleep: davinci_mdio_sleep {
+	davinci_mdio_sleep: davinci-mdio-sleep-pins {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
 			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
@@ -303,7 +303,7 @@
 		>;
 	};
 
-	qspi_pins_default: qspi_pins_default {
+	qspi_pins_default: qspi-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
 			AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
@@ -314,7 +314,7 @@
 		>;
 	};
 
-	qspi_pins_sleep: qspi_pins_sleep{
+	qspi_pins_sleep: qspi-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x87c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)
@@ -333,7 +333,7 @@
 	pinctrl-1 = <&i2c0_pins_sleep>;
 	clock-frequency = <400000>;
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c256";
 		pagesize = <64>;
 		reg = <0x50>;
@@ -452,7 +452,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 		partition@1 {
 			label = "QSPI.U_BOOT.backup";
@@ -527,11 +527,13 @@
 	 * Supply voltage supervisor on board will not allow opp50 so
 	 * disable it and set opp100 as suspend OPP.
 	 */
-	opp50-300000000 {
+	opp-50-300000000 {
+		/* opp50-300000000 */
 		status = "disabled";
 	};
 
-	opp100-600000000 {
+	opp-100-600000000 {
+		/* opp100-600000000 */
 		opp-suspend;
 	};
 };
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi
index 415210b034ef..fd4634f8c629 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi
@@ -180,8 +180,7 @@
 			      <0x9058 0x4>;
 			reg-names = "rev", "sysc", "syss";
 			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
+					 SYSC_OMAP2_SOFTRESET)>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
@@ -442,8 +441,8 @@
 				compatible = "ti,am4372-rtc", "ti,am3352-rtc",
 					     "ti,da830-rtc";
 				reg = <0x0 0x1000>;
-				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
-					      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk_32768_ck>;
 				clock-names = "int-clk";
 				system-power-controller;
@@ -549,10 +548,10 @@
 				syscon = <&scm_conf>;
 				status = "disabled";
 
-				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
-					      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
-					      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
-					      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "rx_thresh", "rx", "tx", "misc";
 
 				ethernet-ports {
@@ -698,8 +697,7 @@
 			      <0x22058 0x4>;
 			reg-names = "rev", "sysc", "syss";
 			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
+					 SYSC_OMAP2_SOFTRESET)>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
@@ -726,8 +724,7 @@
 			      <0x24058 0x4>;
 			reg-names = "rev", "sysc", "syss";
 			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
+					 SYSC_OMAP2_SOFTRESET)>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
@@ -1385,8 +1382,7 @@
 			      <0xa6058 0x4>;
 			reg-names = "rev", "sysc", "syss";
 			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
+					 SYSC_OMAP2_SOFTRESET)>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
@@ -1413,8 +1409,7 @@
 			      <0xa8058 0x4>;
 			reg-names = "rev", "sysc", "syss";
 			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
+					 SYSC_OMAP2_SOFTRESET)>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
@@ -1441,8 +1436,7 @@
 			      <0xaa058 0x4>;
 			reg-names = "rev", "sysc", "syss";
 			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
+					 SYSC_OMAP2_SOFTRESET)>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
diff --git a/arch/arm/boot/dts/am437x-sbc-t43.dts b/arch/arm/boot/dts/ti/omap/am437x-sbc-t43.dts
index 8ea3780f939d..73badf80b4ff 100644
--- a/arch/arm/boot/dts/am437x-sbc-t43.dts
+++ b/arch/arm/boot/dts/ti/omap/am437x-sbc-t43.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2015 CompuLab, Ltd. - https://www.compulab.co.il/
  */
 
 #include "am437x-cm-t43.dts"
@@ -16,7 +16,7 @@
 };
 
 &am43xx_pinmux {
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
 			AM4372_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
@@ -29,7 +29,7 @@
 		>;
 	};
 
-	dss_pinctrl_default: dss_pinctrl_default {
+	dss_pinctrl_default: dss-pinctrl-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam0 hd -> DSS DATA 23 */
 			AM4372_IOPAD(0x9b4, PIN_OUTPUT_PULLUP | MUX_MODE2)
@@ -64,7 +64,7 @@
 		>;
 	};
 
-	uart0_pins_default: uart0_pins_default {
+	uart0_pins_default: uart0-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0)
 			AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0)
@@ -73,27 +73,27 @@
 		>;
 	};
 
-	i2c1_pins: i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0xa6c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1)  /* spi2_cs0.i2c1_sda  */
 			AM4372_IOPAD(0xa60, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1)  /* spi2_sclk.i2c1_scl */
 		>;
 	};
 
-	i2c2_pins: i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3)  /* uart1_ctsn.i2c2_sda  */
 			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3)  /* uart1_rtsn.i2c2_scl */
 		>;
 	};
 
-	usb2_phy1_default: usb2_phy1_default {
+	usb2_phy1_default: usb2-phy1-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0)
 		>;
 	};
 
-	usb2_phy2_default: usb2_phy2_default {
+	usb2_phy2_default: usb2-phy2-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0)
 		>;
@@ -112,7 +112,7 @@
 		#gpio-cells = <2>;
 	};
 
-	eeprom_base: at24@50 {
+	eeprom_base: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
 		pagesize = <16>;
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/ti/omap/am437x-sk-evm.dts
index 036f3831dc26..4700f9879d2d 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/am437x-sk-evm.dts
@@ -159,7 +159,7 @@
 };
 
 &am43xx_pinmux {
-	matrix_keypad_pins: matrix_keypad_pins {
+	matrix_keypad_pins: matrix-keypad-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0xa4c, PIN_OUTPUT | MUX_MODE7)	/* gpio5_13.gpio5_13 */
 			AM4372_IOPAD(0xa50, PIN_OUTPUT | MUX_MODE7)	/* spi4_sclk.gpio5_4 */
@@ -168,7 +168,7 @@
 		>;
 	};
 
-	leds_pins: leds_pins {
+	leds_pins: leds-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0xa28, PIN_OUTPUT | MUX_MODE7)	/* uart3_rxd.gpio5_2 */
 			AM4372_IOPAD(0xa2c, PIN_OUTPUT | MUX_MODE7)	/* uart3_txd.gpio5_3 */
@@ -177,21 +177,21 @@
 		>;
 	};
 
-	i2c0_pins: i2c0_pins {
+	i2c0_pins: i2c0-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
 			AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 		>;
 	};
 
-	i2c1_pins: i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x95c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
 			AM4372_IOPAD(0x958, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
 			AM4372_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
@@ -203,20 +203,20 @@
 		>;
 	};
 
-	ecap0_pins: backlight_pins {
+	ecap0_pins: backlight-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
 		>;
 	};
 
-	edt_ft5306_ts_pins: edt_ft5306_ts_pins {
+	edt_ft5306_ts_pins: edt-ft5306-ts-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x874, PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
 			AM4372_IOPAD(0x878, PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
 		>;
 	};
 
-	vpfe0_pins_default: vpfe0_pins_default {
+	vpfe0_pins_default: vpfe0-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
 			AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
@@ -236,7 +236,7 @@
 		>;
 	};
 
-	vpfe0_pins_sleep: vpfe0_pins_sleep {
+	vpfe0_pins_sleep: vpfe0-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 			AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
@@ -256,13 +256,13 @@
 		>;
 	};
 
-	clkout1_pin: pinmux_clkout1_pin {
+	clkout1_pin: clkout1-pins {
 		pinctrl-single,pins = <
 			0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* XDMA_EVENT_INTR0/CLKOUT1 */
 		>;
 	};
 
-	cpsw_default: cpsw_default {
+	cpsw_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 */
 			AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
@@ -294,7 +294,7 @@
 		>;
 	};
 
-	cpsw_sleep: cpsw_sleep {
+	cpsw_sleep: cpsw-sleep-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
 			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
@@ -326,7 +326,7 @@
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
+	davinci_mdio_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			/* MDIO */
 			AM4372_IOPAD(0x948, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
@@ -334,7 +334,7 @@
 		>;
 	};
 
-	davinci_mdio_sleep: davinci_mdio_sleep {
+	davinci_mdio_sleep: davinci-mdio-sleep-pins {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
 			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
@@ -342,7 +342,7 @@
 		>;
 	};
 
-	dss_pins: dss_pins {
+	dss_pins: dss-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
 			AM4372_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
@@ -376,7 +376,7 @@
 		>;
 	};
 
-	qspi_pins: qspi_pins {
+	qspi_pins: qspi-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
 			AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2)	/* gpmc_csn3.qspi_clk */
@@ -387,7 +387,7 @@
 		>;
 	};
 
-	mcasp1_pins: mcasp1_pins {
+	mcasp1_pins: mcasp1-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
 			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
@@ -396,7 +396,7 @@
 		>;
 	};
 
-	mcasp1_pins_sleep: mcasp1_pins_sleep {
+	mcasp1_pins_sleep: mcasp1-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
@@ -405,25 +405,25 @@
 		>;
 	};
 
-	lcd_pins: lcd_pins {
+	lcd_pins: lcd-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
 		>;
 	};
 
-	usb1_pins: usb1_pins {
+	usb1_pins: usb1-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0xac0, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
 		>;
 	};
 
-	usb2_pins: usb2_pins {
+	usb2_pins: usb2-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
 		>;
 	};
 
-	mmc3_pins_default: pinmux_mmc3_pins_default {
+	mmc3_pins_default: mmc3-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD21) cam1_data2.mmc2_clk */
 			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE22) cam1_data3.mmc2_cmd */
@@ -434,7 +434,7 @@
 		>;
 	};
 
-	mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
+	mmc3_pins_sleep: mmc3-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD21) cam1_data2.mmc2_clk */
 			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE22) cam1_data3.mmc2_cmd */
@@ -445,21 +445,21 @@
 		>;
 	};
 
-	wlan_pins_default: pinmux_wlan_pins_default {
+	wlan_pins_default: wlan-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* cam1_data8.gpio4_8 WL_EN */
 			AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* cam1_wen.gpio4_13 WL_IRQ */
 		>;
 	};
 
-	wlan_pins_sleep: pinmux_wlan_pins_sleep {
+	wlan_pins_sleep: wlan-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* cam1_data8.gpio4_8 WL_EN */
 			AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* cam1_wen.gpio4_13 WL_IRQ */
 		>;
 	};
 
-	uart1_bt_pins_default: pinmux_uart1_bt_pins_default {
+	uart1_bt_pins_default: uart1-bt-default-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x980, PIN_INPUT | MUX_MODE0)		/* uart1_rxd.uart1_rxd */
 			AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
@@ -469,7 +469,7 @@
 		>;
 	};
 
-	uart1_bt_pins_sleep: pinmux_uart1_bt_pins_sleep {
+	uart1_bt_pins_sleep: uart1-bt-sleep-pins {
 		pinctrl-single,pins = <
 			AM4372_IOPAD(0x980, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_rxd.uart1_rxd */
 			AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_txd.uart1_txd */
@@ -570,7 +570,7 @@
 		};
 	};
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c256";
 		pagesize = <64>;
 		reg = <0x50>;
@@ -763,7 +763,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 		partition@1 {
 			label = "QSPI.U_BOOT.backup";
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/ti/omap/am43x-epos-evm.dts
index 27f4ce855549..4ac94be8d000 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/am43x-epos-evm.dts
@@ -141,7 +141,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&unused_pins>;
 
-		unused_pins: unused_pins {
+		unused_pins: unused-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x848, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
 				AM4372_IOPAD(0x850, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
@@ -175,7 +175,7 @@
 			>;
 		};
 
-		cpsw_default: cpsw_default {
+		cpsw_default: cpsw-default-pins {
 			pinctrl-single,pins = <
 				/* Slave 1 */
 				AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
@@ -190,7 +190,7 @@
 			>;
 		};
 
-		cpsw_sleep: cpsw_sleep {
+		cpsw_sleep: cpsw-sleep-pins {
 			pinctrl-single,pins = <
 				/* Slave 1 reset value */
 				AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
@@ -205,7 +205,7 @@
 			>;
 		};
 
-		davinci_mdio_default: davinci_mdio_default {
+		davinci_mdio_default: davinci-mdio-default-pins {
 			pinctrl-single,pins = <
 				/* MDIO */
 				AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
@@ -213,7 +213,7 @@
 			>;
 		};
 
-		davinci_mdio_sleep: davinci_mdio_sleep {
+		davinci_mdio_sleep: davinci-mdio-sleep-pins {
 			pinctrl-single,pins = <
 				/* MDIO reset value */
 				AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
@@ -221,14 +221,14 @@
 			>;
 		};
 
-		i2c0_pins: pinmux_i2c0_pins {
+		i2c0_pins: i2c0-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
 				AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 			>;
 		};
 
-		nand_flash_x8_default: nand_flash_x8_default {
+		nand_flash_x8_default: nand-flash-x8-default-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
 				AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
@@ -249,7 +249,7 @@
 			>;
 		};
 
-		nand_flash_x8_sleep: nand_flash_x8_sleep {
+		nand_flash_x8_sleep: nand-flash-x8-sleep-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x840, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 				AM4372_IOPAD(0x800, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
@@ -270,26 +270,26 @@
 			>;
 		};
 
-		ecap0_pins_default: backlight_pins_default {
+		ecap0_pins_default: backlight-default-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x964, MUX_MODE0)         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
 			>;
 		};
 
-		ecap0_pins_sleep: backlight_pins_sleep {
+		ecap0_pins_sleep: backlight-sleep-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x964, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
 			>;
 		};
 
-		i2c2_pins: pinmux_i2c2_pins {
+		i2c2_pins: i2c2-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
 				AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
 			>;
 		};
 
-		spi0_pins_default: pinmux_spi0_pins_default {
+		spi0_pins_default: spi0-default-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
 				AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
@@ -298,7 +298,7 @@
 			>;
 		};
 
-		spi0_pins_sleep: pinmux_spi0_pins_sleep {
+		spi0_pins_sleep: spi0-sleep-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x950, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
 				AM4372_IOPAD(0x954, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
@@ -307,7 +307,7 @@
 			>;
 		};
 
-		spi1_pins_default: pinmux_spi1_pins_default {
+		spi1_pins_default: spi1-default-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
 				AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
@@ -316,7 +316,7 @@
 			>;
 		};
 
-		spi1_pins_sleep: pinmux_spi1_pins_sleep {
+		spi1_pins_sleep: spi1-sleep-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x990, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 				AM4372_IOPAD(0x994, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
@@ -325,19 +325,19 @@
 			>;
 		};
 
-		mmc1_pins_default: pinmux_mmc1_pins_default {
+		mmc1_pins_default: mmc1-default-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 			>;
 		};
 
-		mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
+		mmc1_pins_sleep: mmc1-sleep-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x960, DS0_PIN_OUTPUT_PULLUP | PIN_INPUT | MUX_MODE7)
 			>;
 		};
 
-		matrix_keypad_default: matrix_keypad_default {
+		matrix_keypad_default: matrix-keypad-default-pins {
 			pinctrl-single,pins = <
 				 AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7)          /* mii1_tx_clk.gpio3_9 */
 				 AM4372_IOPAD(0x930, PIN_OUTPUT | MUX_MODE7)          /* mii1_rx_clk.gpio3_10 */
@@ -350,7 +350,7 @@
 			>;
 		};
 
-		matrix_keypad_sleep: matrix_keypad_sleep {
+		matrix_keypad_sleep: matrix-keypad-sleep-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE7)
 				AM4372_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE7)
@@ -363,7 +363,7 @@
 			>;
 		};
 
-		qspi1_pins_default: qspi1_pins_default {
+		qspi1_pins_default: qspi1-default-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3)
 				AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2)
@@ -374,7 +374,7 @@
 			>;
 		};
 
-		qspi1_pins_sleep: qspi1_pins_sleep {
+		qspi1_pins_sleep: qspi1-sleep-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
 				AM4372_IOPAD(0x888, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
@@ -385,25 +385,25 @@
 			>;
 		};
 
-		pixcir_ts_pins_default: pixcir_ts_pins_default {
+		pixcir_ts_pins_default: pixcir-ts-default-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
 			>;
 		};
 
-		pixcir_ts_pins_sleep: pixcir_ts_pins_sleep {
+		pixcir_ts_pins_sleep: pixcir-ts-sleep-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x844, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
 			>;
 		};
 
-		hdq_pins: pinmux_hdq_pins {
+		hdq_pins: hdq-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
 			>;
 		};
 
-		dss_pins: dss_pins {
+		dss_pins: dss-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
 				AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
@@ -436,14 +436,14 @@
 			>;
 		};
 
-		display_mux_pins: display_mux_pins {
+		display_mux_pins: display-mux-pins {
 			pinctrl-single,pins = <
 				/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
 				AM4372_IOPAD(0x88C, PIN_OUTPUT_PULLUP | MUX_MODE7)
 			>;
 		};
 
-		vpfe1_pins_default: vpfe1_pins_default {
+		vpfe1_pins_default: vpfe1-default-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
 				AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
@@ -461,7 +461,7 @@
 			>;
 		};
 
-		vpfe1_pins_sleep: vpfe1_pins_sleep {
+		vpfe1_pins_sleep: vpfe1-sleep-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 				AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
@@ -479,7 +479,7 @@
 			>;
 		};
 
-		uart0_pins_default: uart0_pins_default {
+		uart0_pins_default: uart0-default-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
 				AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
@@ -488,7 +488,7 @@
 			>;
 		};
 
-		uart0_pins_sleep: uart0_pins_sleep {
+		uart0_pins_sleep: uart0-sleep-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 				AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
@@ -497,31 +497,31 @@
 			>;
 		};
 
-		usb2_phy1_default: usb2_phy1_default {
+		usb2_phy1_default: usb2-phy1-default-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0xac0, PIN_INPUT_PULLDOWN | MUX_MODE0)
 			>;
 		};
 
-		usb2_phy1_sleep: usb2_phy1_sleep {
+		usb2_phy1_sleep: usb2-phy1-sleep-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 
-		usb2_phy2_default: usb2_phy2_default {
+		usb2_phy2_default: usb2-phy2-default-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0xac4, PIN_INPUT_PULLDOWN | MUX_MODE0)
 			>;
 		};
 
-		usb2_phy2_sleep: usb2_phy2_sleep {
+		usb2_phy2_sleep: usb2-phy2-sleep-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 
-		mcasp1_pins: mcasp1_pins {
+		mcasp1_pins: mcasp1-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
 				AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
@@ -530,7 +530,7 @@
 			>;
 		};
 
-		mcasp1_sleep_pins: mcasp1_sleep_pins {
+		mcasp1_sleep_pins: mcasp1-sleep-pins {
 			pinctrl-single,pins = <
 				AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
 				AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE7)
@@ -651,7 +651,7 @@
 		};
 	};
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c256";
 		pagesize = <64>;
 		reg = <0x50>;
@@ -919,7 +919,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 		partition@1 {
 			label = "QSPI.U_BOOT.backup";
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/am43xx-clocks.dtsi
index 9a5437b3d6a8..9a5437b3d6a8 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am43xx-clocks.dtsi
diff --git a/arch/arm/boot/dts/am57-pruss.dtsi b/arch/arm/boot/dts/ti/omap/am57-pruss.dtsi
index 46c5383f0eee..46c5383f0eee 100644
--- a/arch/arm/boot/dts/am57-pruss.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am57-pruss.dtsi
diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/ti/omap/am5718.dtsi
index 6d7530a48c73..6d7530a48c73 100644
--- a/arch/arm/boot/dts/am5718.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am5718.dtsi
diff --git a/arch/arm/boot/dts/ti/omap/am571x-idk-touchscreen.dtso b/arch/arm/boot/dts/ti/omap/am571x-idk-touchscreen.dtso
new file mode 100644
index 000000000000..c051ee6c1130
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/am571x-idk-touchscreen.dtso
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen: edt-ft5506@38 {
+		compatible = "edt,edt-ft5506", "edt,edt-ft5x06";
+
+		reg = <0x38>;
+
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+
+		/* GPIO line is inverted before going to touch panel */
+		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+
+		touchscreen-size-x = <1920>;
+		touchscreen-size-y = <1200>;
+
+		wakeup-source;
+	};
+};
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/ti/omap/am571x-idk.dts
index 48425020281a..322cf79d22e9 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/ti/omap/am571x-idk.dts
@@ -168,8 +168,8 @@
 };
 
 &extcon_usb2 {
-	id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
-	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+	id-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
 };
 
 &sn65hvs882 {
diff --git a/arch/arm/boot/dts/am5728.dtsi b/arch/arm/boot/dts/ti/omap/am5728.dtsi
index 5e0bdf16d485..5e0bdf16d485 100644
--- a/arch/arm/boot/dts/am5728.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am5728.dtsi
diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
index 149cfafb90bf..e6a18954e449 100644
--- a/arch/arm/boot/dts/am5729-beagleboneai.dts
+++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2014-2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2019 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
@@ -196,8 +196,7 @@
 
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
-		ti,enable-id-detection;
-		id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -415,7 +414,6 @@
 		reg = <0x41>;
 		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio2>;
-		interrupt-controller;
 		id = <0>;
 		blocks = <0x5>;
 		irq-trigger = <0x1>;
@@ -677,12 +675,6 @@
 	clock-frequency = <100000>;
 };
 
-&cpu0_opp_table {
-	opp_slow-500000000 {
-		opp-shared;
-	};
-};
-
 &ipu2 {
 	status = "okay";
 	memory-region = <&ipu2_memory_region>;
diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi
index 1d66278c3a72..3fca84819dc0 100644
--- a/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi
@@ -169,8 +169,8 @@
 };
 
 &extcon_usb2 {
-	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+	id-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>;
 };
 
 &sn65hvs882 {
diff --git a/arch/arm/boot/dts/ti/omap/am572x-idk-touchscreen.dtso b/arch/arm/boot/dts/ti/omap/am572x-idk-touchscreen.dtso
new file mode 100644
index 000000000000..573e932b1239
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/am572x-idk-touchscreen.dtso
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen: edt-ft5506@38 {
+		compatible = "edt,edt-ft5506", "edt,edt-ft5x06";
+
+		reg = <0x38>;
+
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+
+		/* GPIO line is inverted before going to touch panel */
+		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+
+		touchscreen-size-x = <1920>;
+		touchscreen-size-y = <1200>;
+
+		wakeup-source;
+	};
+};
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/ti/omap/am572x-idk.dts
index 94a738cb0a4d..94a738cb0a4d 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/ti/omap/am572x-idk.dts
diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/ti/omap/am5748.dtsi
index c260aa1a85bd..a1f029e9d1f3 100644
--- a/arch/arm/boot/dts/am5748.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am5748.dtsi
@@ -25,6 +25,10 @@
 	status = "disabled";
 };
 
+&usb4_tm {
+	status = "disabled";
+};
+
 &atl_tm {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/ti/omap/am574x-idk.dts
index 47b9174d2353..47b9174d2353 100644
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ b/arch/arm/boot/dts/ti/omap/am574x-idk.dts
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi
index 994e69ab38d7..87b61a98d5e9 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi
@@ -149,7 +149,7 @@
 	gpio_fan: gpio_fan {
 		/* Based on 5v 500mA AFB02505HHB */
 		compatible = "gpio-fan";
-		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
+		gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map = <0     0>,
 				     <13000 1>;
 		#cooling-cells = <2>;
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-revb1.dts
index 83e174e053c7..83e174e053c7 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
+++ b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-revb1.dts
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-revc.dts
index 656dd84460d2..656dd84460d2 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
+++ b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-revc.dts
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15.dts
index 0a8b16505ed9..0a8b16505ed9 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15.dts
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts
index 2fc9a5d5e0c0..3dd898955e76 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts
@@ -2,7 +2,7 @@
 /*
  * Support for CompuLab CL-SOM-AM57x System-on-Module
  *
- * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2015 CompuLab Ltd. - https://www.compulab.co.il/
  * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
  */
 
@@ -77,40 +77,40 @@
 };
 
 &dra7_pmx_core {
-	leds_pins_default: leds_pins_default {
+	leds_pins_default: leds-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x347c, PIN_OUTPUT | MUX_MODE14)	/* gpmc_a15.gpio2_5 */
 		>;
 	};
 
-	i2c1_pins_default: i2c1_pins_default {
+	i2c1_pins_default: i2c1-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
 			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
 		>;
 	};
 
-	i2c3_pins_default: i2c3_pins_default {
+	i2c3_pins_default: i2c3-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
 			DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
 		>;
 	};
 
-	i2c4_pins_default: i2c4_pins_default {
+	i2c4_pins_default: i2c4-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x36ac, PIN_INPUT| MUX_MODE10)	/* mcasp1_acl.i2c4_sda */
 			DRA7XX_CORE_IOPAD(0x36b0, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsr.i2c4_scl */
 		>;
 	};
 
-	tps659038_pins_default: tps659038_pins_default {
+	tps659038_pins_default: tps659038-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
 		>;
 	};
 
-	mmc2_pins_default: mmc2_pins_default {
+	mmc2_pins_default: mmc2-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
@@ -125,7 +125,7 @@
 		>;
 	};
 
-	qspi1_pins: pinmux_qspi1_pins {
+	qspi1_pins: qspi1-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1)	/* gpmc_a13.qspi1_rtclk */
 			DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1)	/* gpmc_a16.qspi1_d0 */
@@ -136,7 +136,7 @@
 		>;
 	};
 
-	cpsw_pins_default: cpsw_pins_default {
+	cpsw_pins_default: cpsw-default-pins {
 		pinctrl-single,pins = <
 			/* Slave at addr 0x0 */
 			DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_tclk */
@@ -168,7 +168,7 @@
 		>;
 	};
 
-	cpsw_pins_sleep: cpsw_pins_sleep {
+	cpsw_pins_sleep: cpsw-sleep-pins {
 		pinctrl-single,pins = <
 			/* Slave 1 */
 			DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
@@ -200,7 +200,7 @@
 		>;
 	};
 
-	davinci_mdio_pins_default: davinci_mdio_pins_default {
+	davinci_mdio_pins_default: davinci-mdio-default-pins {
 		pinctrl-single,pins = <
 			/* MDIO */
 			DRA7XX_CORE_IOPAD(0x3590, PIN_OUTPUT_PULLUP | MUX_MODE3)/* vin2a_d10.mdio_mclk */
@@ -208,20 +208,20 @@
 		>;
 	};
 
-	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
+	davinci_mdio_pins_sleep: davinci-mdio-sleep-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3590, PIN_INPUT | MUX_MODE15)
 			DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT | MUX_MODE15)
 		>;
 	};
 
-	ads7846_pins: pinmux_ads7846_pins {
+	ads7846_pins: ads7846-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3464, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpmc_a9.gpio1_31 */
 		>;
 	};
 
-	mcasp3_pins_default: mcasp3_pins_default {
+	mcasp3_pins_default: mcasp3-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
 			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
@@ -230,7 +230,7 @@
 		>;
 	};
 
-	mcasp3_pins_sleep: mcasp3_pins_sleep {
+	mcasp3_pins_sleep: mcasp3-sleep-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
 			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
@@ -429,7 +429,7 @@
 		reg = <0x56>;
 	};
 
-	eeprom_module: atmel@50 {
+	eeprom_module: eeprom@50 {
 		compatible = "atmel,24c08";
 		reg = <0x50>;
 		pagesize = <16>;
@@ -527,7 +527,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <31 0>;
-		pendown-gpio = <&gpio1 31 0>;
+		pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>;
 
 
 		ti,x-min = /bits/ 16 <0x0>;
diff --git a/arch/arm/boot/dts/am57xx-commercial-grade.dtsi b/arch/arm/boot/dts/ti/omap/am57xx-commercial-grade.dtsi
index 3eed6e09c884..3eed6e09c884 100644
--- a/arch/arm/boot/dts/am57xx-commercial-grade.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am57xx-commercial-grade.dtsi
diff --git a/arch/arm/boot/dts/ti/omap/am57xx-evm.dtso b/arch/arm/boot/dts/ti/omap/am57xx-evm.dtso
new file mode 100644
index 000000000000..12385a31061e
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/am57xx-evm.dtso
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DT overlay for AM57xx GP EVM boards
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+&{/} {
+	compatible = "ti,am5728-evm", "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+	model = "TI AM5728 EVM";
+
+	aliases {
+		display0 = "/display";
+		display1 = "/connector"; // Fixme: &lcd0 and &hdmi0 could be
+					 // resolved here correcly based on
+					 // information in the base dtb symbol
+					 // table with a fix in dtc
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-user1 {
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			label = "USER1";
+			linux,code = <BTN_1>;
+		};
+
+		button-user2 {
+			gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+			label = "USER2";
+			linux,code = <BTN_2>;
+		};
+
+		button-user3 {
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			label = "USER3";
+			linux,code = <BTN_3>;
+		};
+
+		button-user4 {
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+			label = "USER4";
+			linux,code = <BTN_4>;
+		};
+
+		button-user5 {
+			gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+			label = "USER5";
+			linux,code = <BTN_5>;
+		};
+	};
+
+	lcd0: display {
+		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
+		backlight = <&lcd_bl>;
+		enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		label = "lcd";
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 243 245 247 249 251 252 253 255>;
+		default-brightness-level = <8>;
+		pwms = <&ehrpwm1 0 50000 0>;
+	};
+};
+
+&ehrpwm1 {
+	status = "okay";
+};
+
+&epwmss1 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		attb-gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x5c>;
+		reset-gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&dss {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			dpi_out: endpoint {
+				data-lines = <24>;
+				remote-endpoint = <&lcd_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/ti/omap/am57xx-idk-common.dtsi
index c06eda817242..43e3623f079c 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am57xx-idk-common.dtsi
@@ -158,14 +158,14 @@
 };
 
 &dra7_pmx_core {
-	dcan1_pins_default: dcan1_pins_default {
+	dcan1_pins_default: dcan1-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* dcan1_tx */
 			DRA7XX_CORE_IOPAD(0x37d4, PIN_INPUT_PULLUP | MUX_MODE0)		/* dcan1_rx */
 		>;
 	};
 
-	dcan1_pins_sleep: dcan1_pins_sleep {
+	dcan1_pins_sleep: dcan1-sleep-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
 			DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP)	/* dcan1_rx.off */
@@ -542,7 +542,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.SPL";
-			reg = <0x00000000 0x000040000>;
+			reg = <0x00000000 0x00040000>;
 		};
 		partition@1 {
 			label = "QSPI.u-boot";
diff --git a/arch/arm/boot/dts/ti/omap/am57xx-idk-lcd-osd101t2045.dtso b/arch/arm/boot/dts/ti/omap/am57xx-idk-lcd-osd101t2045.dtso
new file mode 100644
index 000000000000..25d74e9f3c9e
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/am57xx-idk-lcd-osd101t2045.dtso
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	aliases {
+		display0 = "/display";
+		display1 = "/connector";
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 1>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+};
+
+&dsi_bridge {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	lcd: display {
+		compatible = "osddisplays,osd101t2045-53ts";
+		reg = <0>;
+
+		label = "lcd";
+
+		backlight = <&lcd_bl>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_bridge_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@1 {
+		reg = <1>;
+		dsi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+		};
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ti/omap/am57xx-idk-lcd-osd101t2587.dtso b/arch/arm/boot/dts/ti/omap/am57xx-idk-lcd-osd101t2587.dtso
new file mode 100644
index 000000000000..8cea7ba32487
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/am57xx-idk-lcd-osd101t2587.dtso
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&{/} {
+	aliases {
+		display0 = "/display";
+		display1 = "/connector";
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 1>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+};
+
+&dsi_bridge {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	lcd: display {
+		compatible = "osddisplays,osd101t2587-53ts";
+		reg = <0>;
+
+		label = "lcd";
+
+		backlight = <&lcd_bl>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_bridge_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@1 {
+		reg = <1>;
+		dsi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+		};
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am57xx-industrial-grade.dtsi b/arch/arm/boot/dts/ti/omap/am57xx-industrial-grade.dtsi
index 422f953fc8d8..422f953fc8d8 100644
--- a/arch/arm/boot/dts/am57xx-industrial-grade.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am57xx-industrial-grade.dtsi
diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/ti/omap/am57xx-sbc-am57x.dts
index beef63e8a005..41bef36c5554 100644
--- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts
+++ b/arch/arm/boot/dts/ti/omap/am57xx-sbc-am57x.dts
@@ -2,7 +2,7 @@
 /*
  * Support for CompuLab SBC-AM57x single board computer
  *
- * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2015 CompuLab Ltd. - https://www.compulab.co.il/
  * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
  */
 
@@ -20,14 +20,14 @@
 };
 
 &dra7_pmx_core {
-	uart3_pins_default: uart3_pins_default {
+	uart3_pins_default: uart3-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0)	/* uart3_rxd */
 			DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0)	/* uart3_txd */
 		>;
 	};
 
-	mmc1_pins_default: mmc1_pins_default {
+	mmc1_pins_default: mmc1-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
@@ -40,33 +40,33 @@
 		>;
 	};
 
-	usb1_pins: pinmux_usb1_pins {
+	usb1_pins: usb1-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
 		>;
 	};
 
-	i2c5_pins_default: i2c5_pins_default {
+	i2c5_pins_default: i2c5-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10)	/* mcasp1_axr0.i2c5_sda */
 			DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10)	/* mcasp1_axr1.i2c5_scl */
 		>;
 	};
 
-	lcd_pins_default: lcd_pins_default {
+	lcd_pins_default: lcd-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3564, PIN_OUTPUT | MUX_MODE14)      /* vin2a_vsync0.gpio4_0 */
 		>;
 	};
 
-	hdmi_pins: pinmux_hdmi_pins {
+	hdmi_pins: hdmi-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1)	/* i2c2_sda.hdmi1_ddc_scl */
 			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1)	/* i2c2_scl.hdmi1_ddc_sda */
 		>;
 	};
 
-	hdmi_conn_pins: pinmux_hdmi_conn_pins {
+	hdmi_conn_pins: hdmi-conn-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT | MUX_MODE14)	/* spi1_cs2.gpio7_12 */
 		>;
@@ -105,7 +105,7 @@
 	pinctrl-0 = <&i2c5_pins_default>;
 	clock-frequency = <400000>;
 
-	eeprom_base: atmel@54 {
+	eeprom_base: eeprom@54 {
 		compatible = "atmel,24c08";
 		reg = <0x54>;
 		pagesize = <16>;
diff --git a/arch/arm/boot/dts/compulab-sb-som.dtsi b/arch/arm/boot/dts/ti/omap/compulab-sb-som.dtsi
index f5e6216718d8..8a8fa1b2b26c 100644
--- a/arch/arm/boot/dts/compulab-sb-som.dtsi
+++ b/arch/arm/boot/dts/ti/omap/compulab-sb-som.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2015 CompuLab, Ltd. - https://www.compulab.co.il/
  */
 
 / {
diff --git a/arch/arm/boot/dts/dm3725.dtsi b/arch/arm/boot/dts/ti/omap/dm3725.dtsi
index d24e906a14b1..d24e906a14b1 100644
--- a/arch/arm/boot/dts/dm3725.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dm3725.dtsi
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/ti/omap/dm8148-evm.dts
index fe3f9a970b18..57a9eef09f6f 100644
--- a/arch/arm/boot/dts/dm8148-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/dm8148-evm.dts
@@ -51,7 +51,6 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>; /* termcount */
-		linux,mtd-name = "micron,mt29f2g16aadwp";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ti,nand-ecc-opt = "bch8";
@@ -116,7 +115,7 @@
 };
 
 &pincntl {
-	sd1_pins: pinmux_sd1_pins {
+	sd1_pins: sd1-pins {
 		pinctrl-single,pins = <
 			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
 			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP |  0x1)	/* SD1_CMD */
@@ -129,13 +128,13 @@
 			>;
 	};
 
-	usb0_pins: pinmux_usb0_pins {
+	usb0_pins: usb0-pins {
 		pinctrl-single,pins = <
 			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
 			>;
 	};
 
-	usb1_pins: pinmux_usb1_pins {
+	usb1_pins: usb1-pins {
 		pinctrl-single,pins = <
 			DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)	/* USB1_DRVVBUS */
 			>;
diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/ti/omap/dm8148-t410.dts
index 79ccdd4470f4..f3e2ecf6d723 100644
--- a/arch/arm/boot/dts/dm8148-t410.dts
+++ b/arch/arm/boot/dts/ti/omap/dm8148-t410.dts
@@ -71,7 +71,7 @@
 };
 
 &pincntl {
-	sd2_pins: pinmux_sd2_pins {
+	sd2_pins: sd2-pins {
 		pinctrl-single,pins = <
 			DM814X_IOPAD(0x09c0, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[7] */
 			DM814X_IOPAD(0x09c4, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[6] */
@@ -87,13 +87,13 @@
 			>;
 	};
 
-	usb0_pins: pinmux_usb0_pins {
+	usb0_pins: usb0-pins {
 		pinctrl-single,pins = <
 			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
 			>;
 	};
 
-	usb1_pins: pinmux_usb1_pins {
+	usb1_pins: usb1-pins {
 		pinctrl-single,pins = <
 			DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)	/* USB1_DRVVBUS */
 			>;
diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/ti/omap/dm814x-clocks.dtsi
index f7939f43413b..f7939f43413b 100644
--- a/arch/arm/boot/dts/dm814x-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dm814x-clocks.dtsi
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/ti/omap/dm814x.dtsi
index 8104969c67c1..27d1f35a31fd 100644
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dm814x.dtsi
@@ -155,10 +155,10 @@
 
 			cppi41dma: dma-controller@47402000 {
 				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
+				reg = <0x47400000 0x1000>,
+				      <0x47402000 0x1000>,
+				      <0x47403000 0x1000>,
+				      <0x47404000 0x4000>;
 				reg-names = "glue", "controller", "scheduler", "queuemgr";
 				interrupts = <17>;
 				interrupt-names = "glue";
@@ -333,7 +333,7 @@
 				};
 			};
 
-			uart1: uart@20000 {
+			uart1: serial@20000 {
 				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				ti,hwmods = "uart1";
 				reg = <0x20000 0x2000>;
@@ -343,7 +343,7 @@
 				dma-names = "tx", "rx";
 			};
 
-			uart2: uart@22000 {
+			uart2: serial@22000 {
 				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				ti,hwmods = "uart2";
 				reg = <0x22000 0x2000>;
@@ -353,7 +353,7 @@
 				dma-names = "tx", "rx";
 			};
 
-			uart3: uart@24000 {
+			uart3: serial@24000 {
 				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				ti,hwmods = "uart3";
 				reg = <0x24000 0x2000>;
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/ti/omap/dm8168-evm.dts
index 244a957f9ba3..6130b9a5f660 100644
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/dm8168-evm.dts
@@ -30,7 +30,7 @@
 };
 
 &dm816x_pinmux {
-	mcspi1_pins: pinmux_mcspi1_pins {
+	mcspi1_pins: mcspi1-pins {
 		pinctrl-single,pins = <
 			DM816X_IOPAD(0x0a94, MUX_MODE0)			/* SPI_SCLK */
 			DM816X_IOPAD(0x0a98, MUX_MODE0)			/* SPI_SCS0 */
@@ -39,7 +39,7 @@
 		>;
 	};
 
-	mmc_pins: pinmux_mmc_pins {
+	mmc_pins: mmc-pins {
 		pinctrl-single,pins = <
 			DM816X_IOPAD(0x0a70, MUX_MODE0)			/* SD_POW */
 			DM816X_IOPAD(0x0a74, MUX_MODE0)			/* SD_CLK */
@@ -53,19 +53,19 @@
 		>;
 	};
 
-	usb0_pins: pinmux_usb0_pins {
+	usb0_pins: usb0-pins {
 		pinctrl-single,pins = <
 			DM816X_IOPAD(0x0d04, MUX_MODE0)			/* USB0_DRVVBUS */
 		>;
 	};
 
-	usb1_pins: pinmux_usb1_pins {
+	usb1_pins: usb1-pins {
 		pinctrl-single,pins = <
 			DM816X_IOPAD(0x0d08, MUX_MODE0)			/* USB1_DRVVBUS */
 		>;
 	};
 
-	nandflash_pins: nandflash_pins {
+	nandflash_pins: nandflash-pins {
 		pinctrl-single,pins = <
 			DM816X_IOPAD(0x0b38, PULL_UP | MUX_MODE0)		/* PINCTRL207 GPMC_CS0*/
 			DM816X_IOPAD(0x0b60, PULL_ENA | MUX_MODE0)		/* PINCTRL217 GPMC_ADV_ALE */
@@ -119,7 +119,6 @@
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";
-		linux,mtd-name = "micron,mt29f2g16aadwp";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
diff --git a/arch/arm/boot/dts/dm816x-clocks.dtsi b/arch/arm/boot/dts/ti/omap/dm816x-clocks.dtsi
index 338449b32a18..338449b32a18 100644
--- a/arch/arm/boot/dts/dm816x-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dm816x-clocks.dtsi
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/ti/omap/dm816x.dtsi
index 649b33194455..407d7bc5b13a 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dm816x.dtsi
@@ -522,7 +522,7 @@
 			ti,timer-pwm;
 		};
 
-		uart1: uart@48020000 {
+		uart1: serial@48020000 {
 			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart1";
 			reg = <0x48020000 0x2000>;
@@ -532,7 +532,7 @@
 			dma-names = "tx", "rx";
 		};
 
-		uart2: uart@48022000 {
+		uart2: serial@48022000 {
 			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart2";
 			reg = <0x48022000 0x2000>;
@@ -542,7 +542,7 @@
 			dma-names = "tx", "rx";
 		};
 
-		uart3: uart@48024000 {
+		uart3: serial@48024000 {
 			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart3";
 			reg = <0x48024000 0x2000>;
@@ -643,10 +643,10 @@
 
 			cppi41dma: dma-controller@47402000 {
 				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
+				reg = <0x47400000 0x1000>,
+				      <0x47402000 0x1000>,
+				      <0x47403000 0x1000>,
+				      <0x47404000 0x4000>;
 				reg-names = "glue", "controller", "scheduler", "queuemgr";
 				interrupts = <17>;
 				interrupt-names = "glue";
diff --git a/arch/arm/boot/dts/dra62x-clocks.dtsi b/arch/arm/boot/dts/ti/omap/dra62x-clocks.dtsi
index 11d1241b0e13..11d1241b0e13 100644
--- a/arch/arm/boot/dts/dra62x-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra62x-clocks.dtsi
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/ti/omap/dra62x-j5eco-evm.dts
index 577114c4c20a..df05a0682322 100644
--- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/dra62x-j5eco-evm.dts
@@ -51,7 +51,6 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>; /* termcount */
-		linux,mtd-name = "micron,mt29f2g16aadwp";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ti,nand-ecc-opt = "bch8";
@@ -108,7 +107,7 @@
 };
 
 &pincntl {
-	sd1_pins: pinmux_sd1_pins {
+	sd1_pins: sd1-pins {
 		pinctrl-single,pins = <
 			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
 			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP |  0x1)	/* SD1_CMD */
@@ -121,7 +120,7 @@
 			>;
 	};
 
-	usb0_pins: pinmux_usb0_pins {
+	usb0_pins: usb0-pins {
 		pinctrl-single,pins = <
 			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
 			>;
diff --git a/arch/arm/boot/dts/dra62x.dtsi b/arch/arm/boot/dts/ti/omap/dra62x.dtsi
index cfefa670515c..cfefa670515c 100644
--- a/arch/arm/boot/dts/dra62x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra62x.dtsi
diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/ti/omap/dra7-dspeve-thermal.dtsi
index 747ff0db90c7..747ff0db90c7 100644
--- a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7-dspeve-thermal.dtsi
diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi
index 68c43eb12c1a..ed5199d7acd8 100644
--- a/arch/arm/boot/dts/dra7-evm-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi
@@ -15,12 +15,12 @@
 
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
 	};
 
 	extcon_usb2: extcon_usb2 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
 	};
 
 	sound0: sound0 {
@@ -151,7 +151,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.SPL";
-			reg = <0x00000000 0x000010000>;
+			reg = <0x00000000 0x00010000>;
 		};
 		partition@1 {
 			label = "QSPI.SPL.backup1";
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/ti/omap/dra7-evm.dts
index 87deb6a76eff..46efbaa67a8e 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/dra7-evm.dts
@@ -152,14 +152,14 @@
 };
 
 &dra7_pmx_core {
-	dcan1_pins_default: dcan1_pins_default {
+	dcan1_pins_default: dcan1-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
 			DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
 		>;
 	};
 
-	dcan1_pins_sleep: dcan1_pins_sleep {
+	dcan1_pins_sleep: dcan1-sleep-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
 			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
@@ -483,7 +483,7 @@
 		#size-cells = <1>;
 		partition@0 {
 			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
+			reg = <0x00000000 0x00020000>;
 		};
 		partition@1 {
 			label = "NAND.SPL.backup1";
diff --git a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi b/arch/arm/boot/dts/ti/omap/dra7-ipu-dsp-common.dtsi
index a5bdc6431d8d..a5bdc6431d8d 100644
--- a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7-ipu-dsp-common.dtsi
diff --git a/arch/arm/boot/dts/dra7-iva-thermal.dtsi b/arch/arm/boot/dts/ti/omap/dra7-iva-thermal.dtsi
index 0a31313065df..0a31313065df 100644
--- a/arch/arm/boot/dts/dra7-iva-thermal.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7-iva-thermal.dtsi
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
index 5733e3a4ea8e..c9282f57ffa5 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
@@ -12,6 +12,7 @@
 	ranges = <0x00000000 0x4a000000 0x100000>,	/* segment 0 */
 		 <0x00100000 0x4a100000 0x100000>,	/* segment 1 */
 		 <0x00200000 0x4a200000 0x100000>;	/* segment 2 */
+	dma-ranges;
 
 	segment@0 {					/* 0x4a000000 */
 		compatible = "simple-pm-bus";
@@ -80,7 +81,7 @@
 						};
 					};
 
-					phy_gmii_sel: phy-gmii-sel {
+					phy_gmii_sel: phy-gmii-sel@554 {
 						compatible = "ti,dra7xx-phy-gmii-sel";
 						reg = <0x554 0x4>;
 						#phy-cells = <1>;
@@ -266,8 +267,8 @@
 					syscon-phy-power = <&scm_conf 0x300>;
 					clocks = <&usb_phy1_always_on_clk32k>,
 						 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
-					clock-names =	"wkupclk",
-							"refclk";
+					clock-names = "wkupclk",
+						      "refclk";
 					#phy-cells = <0>;
 				};
 
@@ -278,8 +279,8 @@
 					syscon-phy-power = <&scm_conf 0xe74>;
 					clocks = <&usb_phy2_always_on_clk32k>,
 						 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 8>;
-					clock-names =	"wkupclk",
-							"refclk";
+					clock-names = "wkupclk",
+						      "refclk";
 					#phy-cells = <0>;
 				};
 
@@ -293,9 +294,9 @@
 					clocks = <&usb_phy3_always_on_clk32k>,
 						 <&sys_clkin1>,
 						 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
-					clock-names =	"wkupclk",
-							"sysclk",
-							"refclk";
+					clock-names = "wkupclk",
+						      "sysclk",
+						      "refclk";
 					#phy-cells = <0>;
 				};
 			};
@@ -557,6 +558,7 @@
 			 <0x0007e000 0x0017e000 0x001000>,	/* ap 124 */
 			 <0x00059000 0x00159000 0x001000>,	/* ap 125 */
 			 <0x0005a000 0x0015a000 0x001000>;	/* ap 126 */
+		dma-ranges;
 
 		target-module@2000 {			/* 0x4a102000, ap 27 3c.0 */
 			compatible = "ti,sysc";
diff --git a/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi b/arch/arm/boot/dts/ti/omap/dra7-mmc-iodelay.dtsi
index aa0947266526..cb1a682c26cd 100644
--- a/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7-mmc-iodelay.dtsi
@@ -6,7 +6,7 @@
  */
 
 &dra7_pmx_core {
-	mmc1_pins_default_no_clk_pu: mmc1_pins_default_no_clk_pu {
+	mmc1_pins_default_no_clk_pu: mmc1-default-no-clk-pu-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/ti/omap/dra7.dtsi
index 97ce0c4f1df7..711ce4c31bb1 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7.dtsi
@@ -9,7 +9,6 @@
 #include <dt-bindings/clock/dra7.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/dra.h>
-#include <dt-bindings/clock/dra7.h>
 
 #define MAX_SOURCES 400
 
@@ -101,7 +100,8 @@
 		compatible = "operating-points-v2-ti-cpu";
 		syscon = <&scm_wkup>;
 
-		opp_nom-1000000000 {
+		opp-1000000000 {
+			/* OPP NOM */
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <1060000 850000 1150000>,
 					<1060000 850000 1150000>;
@@ -109,7 +109,8 @@
 			opp-suspend;
 		};
 
-		opp_od-1176000000 {
+		opp-1176000000 {
+			/* OPP OD */
 			opp-hz = /bits/ 64 <1176000000>;
 			opp-microvolt = <1160000 885000 1160000>,
 					<1160000 885000 1160000>;
@@ -117,7 +118,8 @@
 			opp-supported-hw = <0xFF 0x02>;
 		};
 
-		opp_high@1500000000 {
+		opp-1500000000 {
+			/* OPP High */
 			opp-hz = /bits/ 64 <1500000000>;
 			opp-microvolt = <1210000 950000 1250000>,
 					<1210000 950000 1250000>;
@@ -144,7 +146,7 @@
 
 		l3-noc@44000000 {
 			compatible = "ti,dra7-l3-noc";
-			reg = <0x44000000 0x1000>,
+			reg = <0x44000000 0x1000000>,
 			      <0x45000000 0x1000>;
 			interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
 					      <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
@@ -193,24 +195,22 @@
 			clock-names = "fck", "phy-clk", "phy-clk-div";
 			#size-cells = <1>;
 			#address-cells = <1>;
-			ranges = <0x51000000 0x51000000 0x3000>,
-				 <0x20000000 0x20000000 0x10000000>;
+			ranges = <0x51000000 0x51000000 0x3000
+				  0x0	     0x20000000 0x10000000>;
 			dma-ranges;
 			/**
 			 * To enable PCI endpoint mode, disable the pcie1_rc
 			 * node and enable pcie1_ep mode.
 			 */
 			pcie1_rc: pcie@51000000 {
-				reg = <0x51000000 0x2000>,
-				      <0x51002000 0x14c>,
-				      <0x20001000 0x2000>;
+				reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
 				reg-names = "rc_dbics", "ti_conf", "config";
 				interrupts = <0 232 0x4>, <0 233 0x4>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				device_type = "pci";
-				ranges = <0x81000000 0 0x00000000 0x20003000 0 0x00010000>,
-					 <0x82000000 0 0x20013000 0x20013000 0 0x0ffed000>;
+				ranges = <0x81000000 0 0          0x03000 0 0x00010000
+					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
@@ -233,10 +233,7 @@
 			};
 
 			pcie1_ep: pcie_ep@51000000 {
-				reg = <0x51000000 0x28>,
-				      <0x51002000 0x14c>,
-				      <0x51001000 0x28>,
-				      <0x20001000 0x10000000>;
+				reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
 				reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
 				interrupts = <0 232 0x4>;
 				num-lanes = <1>;
@@ -267,21 +264,19 @@
 			reset-names = "rstctrl";
 			#size-cells = <1>;
 			#address-cells = <1>;
-			ranges = <0x51800000 0x51800000 0x3000>,
-				 <0x30000000 0x30000000 0x10000000>;
+			ranges = <0x51800000 0x51800000 0x3000
+				  0x0	     0x30000000 0x10000000>;
 			dma-ranges;
 			status = "disabled";
 			pcie2_rc: pcie@51800000 {
-				reg = <0x51800000 0x2000>,
-				      <0x51802000 0x14c>,
-				      <0x30001000 0x2000>;
+				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
 				reg-names = "rc_dbics", "ti_conf", "config";
 				interrupts = <0 355 0x4>, <0 356 0x4>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				device_type = "pci";
-				ranges = <0x81000000 0 0x00000000 0x30003000 0 0x00010000>,
-					 <0x82000000 0 0x30013000 0x30013000 0 0x0ffed000>;
+				ranges = <0x81000000 0 0          0x03000 0 0x00010000
+					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
@@ -635,7 +630,7 @@
 			};
 		};
 
-		abb_mpu: regulator-abb-mpu {
+		abb_mpu: regulator-abb-mpu@4ae07ddc {
 			compatible = "ti,abb-v3";
 			regulator-name = "abb_mpu";
 			#address-cells = <0>;
@@ -668,7 +663,7 @@
 			>;
 		};
 
-		abb_ivahd: regulator-abb-ivahd {
+		abb_ivahd: regulator-abb-ivahd@4ae07e34 {
 			compatible = "ti,abb-v3";
 			regulator-name = "abb_ivahd";
 			#address-cells = <0>;
@@ -701,7 +696,7 @@
 			>;
 		};
 
-		abb_dspeve: regulator-abb-dspeve {
+		abb_dspeve: regulator-abb-dspeve@4ae07e30 {
 			compatible = "ti,abb-v3";
 			regulator-name = "abb_dspeve";
 			#address-cells = <0>;
@@ -734,7 +729,7 @@
 			>;
 		};
 
-		abb_gpu: regulator-abb-gpu {
+		abb_gpu: regulator-abb-gpu@4ae07de4 {
 			compatible = "ti,abb-v3";
 			regulator-name = "abb_gpu";
 			#address-cells = <0>;
@@ -847,12 +842,19 @@
 					<SYSC_IDLE_SMART>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
 			clocks = <&gpu_clkctrl DRA7_GPU_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x56000000 0x2000000>;
+
+			gpu@0 {
+				compatible = "ti,am5728-gpu", "img,powervr-sgx544";
+				reg = <0x0 0x10000>; /* 64kB */
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		crossbar_mpu: crossbar@4a002a48 {
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/ti/omap/dra71-evm.dts
index a64364443031..1d2df8128cfe 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/dra71-evm.dts
@@ -83,10 +83,10 @@
 		compatible = "ti,lp8733";
 		reg = <0x60>;
 
-		buck0-in-supply =<&vsys_3v3>;
-		buck1-in-supply =<&vsys_3v3>;
-		ldo0-in-supply =<&evm_5v0>;
-		ldo1-in-supply =<&evm_5v0>;
+		buck0-in-supply = <&vsys_3v3>;
+		buck1-in-supply = <&vsys_3v3>;
+		ldo0-in-supply = <&evm_5v0>;
+		ldo1-in-supply = <&evm_5v0>;
 
 		lp8733_regulators: regulators {
 			lp8733_buck0_reg: buck0 {
@@ -131,10 +131,10 @@
 		compatible = "ti,lp8732";
 		reg = <0x61>;
 
-		buck0-in-supply =<&vsys_3v3>;
-		buck1-in-supply =<&vsys_3v3>;
-		ldo0-in-supply =<&vsys_3v3>;
-		ldo1-in-supply =<&vsys_3v3>;
+		buck0-in-supply = <&vsys_3v3>;
+		buck1-in-supply = <&vsys_3v3>;
+		ldo0-in-supply = <&vsys_3v3>;
+		ldo1-in-supply = <&vsys_3v3>;
 
 		lp8732_regulators: regulators {
 			lp8732_buck0_reg: buck0 {
@@ -293,11 +293,11 @@
 };
 
 &extcon_usb1 {
-	vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
 };
 
 &extcon_usb2 {
-	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
 };
 
 &ipu2 {
diff --git a/arch/arm/boot/dts/dra71x.dtsi b/arch/arm/boot/dts/ti/omap/dra71x.dtsi
index 9c270d8f75d5..9c270d8f75d5 100644
--- a/arch/arm/boot/dts/dra71x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra71x.dtsi
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi
index 8948e10dbeb8..f8151c61488e 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi
@@ -96,12 +96,12 @@
 
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
 	};
 
 	extcon_usb2: extcon_usb2 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
 	};
 
 	hdmi0: connector {
@@ -197,14 +197,14 @@
 };
 
 &dra7_pmx_core {
-	dcan1_pins_default: dcan1_pins_default {
+	dcan1_pins_default: dcan1-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
 			DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1)	/* wakeup0.dcan1_rx */
 		>;
 	};
 
-	dcan1_pins_sleep: dcan1_pins_sleep {
+	dcan1_pins_sleep: dcan1-sleep-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
 			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
@@ -356,7 +356,7 @@
 		#size-cells = <1>;
 		partition@0 {
 			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
+			reg = <0x00000000 0x00020000>;
 		};
 		partition@1 {
 			label = "NAND.SPL.backup1";
@@ -490,7 +490,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.SPL";
-			reg = <0x00000000 0x000010000>;
+			reg = <0x00000000 0x00010000>;
 		};
 		partition@1 {
 			label = "QSPI.SPL.backup1";
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/ti/omap/dra72-evm-revc.dts
index f242b937f88c..f242b937f88c 100644
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ b/arch/arm/boot/dts/ti/omap/dra72-evm-revc.dts
diff --git a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi b/arch/arm/boot/dts/ti/omap/dra72-evm-tps65917.dtsi
index 7b433f549239..7b433f549239 100644
--- a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra72-evm-tps65917.dtsi
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/ti/omap/dra72-evm.dts
index 5f62f92eb96c..5f62f92eb96c 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/dra72-evm.dts
diff --git a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi b/arch/arm/boot/dts/ti/omap/dra72x-mmc-iodelay.dtsi
index 34eea3c048bd..d006f1dfdeb5 100644
--- a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra72x-mmc-iodelay.dtsi
@@ -32,7 +32,7 @@
  */
 
 &dra7_pmx_core {
-	mmc1_pins_default: mmc1_pins_default {
+	mmc1_pins_default: mmc1-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
@@ -43,7 +43,7 @@
 		>;
 	};
 
-	mmc1_pins_sdr12: mmc1_pins_sdr12 {
+	mmc1_pins_sdr12: mmc1-sdr12-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
@@ -54,7 +54,7 @@
 		>;
 	};
 
-	mmc1_pins_hs: mmc1_pins_hs {
+	mmc1_pins_hs: mmc1-hs-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
@@ -65,7 +65,7 @@
 		>;
 	};
 
-	mmc1_pins_sdr25: mmc1_pins_sdr25 {
+	mmc1_pins_sdr25: mmc1-sdr25-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
@@ -76,7 +76,7 @@
 		>;
 	};
 
-	mmc1_pins_sdr50: mmc1_pins_sdr50 {
+	mmc1_pins_sdr50: mmc1-sdr50-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_cmd.cmd */
@@ -87,7 +87,7 @@
 		>;
 	};
 
-	mmc1_pins_ddr50_rev10: mmc1_pins_ddr50_rev10 {
+	mmc1_pins_ddr50_rev10: mmc1-ddr50-rev10-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
@@ -98,7 +98,7 @@
 		>;
 	};
 
-	mmc1_pins_ddr50_rev20: mmc1_pins_ddr50_rev20 {
+	mmc1_pins_ddr50_rev20: mmc1-ddr50-rev20-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
@@ -109,7 +109,7 @@
 		>;
 	};
 
-	mmc1_pins_sdr104: mmc1_pins_sdr104 {
+	mmc1_pins_sdr104: mmc1-sdr104-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
@@ -120,7 +120,7 @@
 		>;
 	};
 
-	mmc2_pins_default: mmc2_pins_default {
+	mmc2_pins_default: mmc2-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
@@ -135,7 +135,7 @@
 		>;
 	};
 
-	mmc2_pins_hs: mmc2_pins_hs {
+	mmc2_pins_hs: mmc2-hs-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
@@ -150,7 +150,7 @@
 		>;
 	};
 
-	mmc2_pins_ddr_rev10: mmc2_pins_ddr_rev10 {
+	mmc2_pins_ddr_rev10: mmc2-ddr-rev10-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a19.mmc2_dat4 */
 			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a20.mmc2_dat5 */
@@ -165,7 +165,7 @@
 		>;
 	};
 
-	mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 {
+	mmc2_pins_ddr_rev20: mmc2-ddr-rev20-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
@@ -180,7 +180,7 @@
 		>;
 	};
 
-	mmc2_pins_hs200: mmc2_pins_hs200 {
+	mmc2_pins_hs200: mmc2-hs200-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
@@ -195,7 +195,7 @@
 		>;
 	};
 
-	mmc4_pins_default: mmc4_pins_default {
+	mmc4_pins_default: mmc4-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
 			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/ti/omap/dra72x.dtsi
index 90617261373c..90617261373c 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra72x.dtsi
diff --git a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi b/arch/arm/boot/dts/ti/omap/dra74-ipu-dsp-common.dtsi
index 3256631510c5..3256631510c5 100644
--- a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra74-ipu-dsp-common.dtsi
diff --git a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi b/arch/arm/boot/dts/ti/omap/dra74x-mmc-iodelay.dtsi
index b9d040135c5f..e2fdb0702f5c 100644
--- a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra74x-mmc-iodelay.dtsi
@@ -30,7 +30,7 @@
  */
 
 &dra7_pmx_core {
-	mmc1_pins_default: mmc1_pins_default {
+	mmc1_pins_default: mmc1-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
@@ -41,7 +41,7 @@
 		>;
 	};
 
-	mmc1_pins_sdr12: mmc1_pins_sdr12 {
+	mmc1_pins_sdr12: mmc1-sdr12-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
@@ -52,7 +52,7 @@
 		>;
 	};
 
-	mmc1_pins_hs: mmc1_pins_hs {
+	mmc1_pins_hs: mmc1-hs-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
@@ -63,7 +63,7 @@
 		>;
 	};
 
-	mmc1_pins_sdr25: mmc1_pins_sdr25 {
+	mmc1_pins_sdr25: mmc1-sdr25-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_cmd.cmd */
@@ -74,7 +74,7 @@
 		>;
 	};
 
-	mmc1_pins_sdr50: mmc1_pins_sdr50 {
+	mmc1_pins_sdr50: mmc1-sdr50-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_cmd.cmd */
@@ -85,7 +85,7 @@
 		>;
 	};
 
-	mmc1_pins_ddr50: mmc1_pins_ddr50 {
+	mmc1_pins_ddr50: mmc1-ddr50-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
@@ -96,7 +96,7 @@
 		>;
 	};
 
-	mmc1_pins_sdr104: mmc1_pins_sdr104 {
+	mmc1_pins_sdr104: mmc1-sdr104-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
@@ -107,7 +107,7 @@
 		>;
 	};
 
-	mmc2_pins_default: mmc2_pins_default {
+	mmc2_pins_default: mmc2-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
@@ -122,7 +122,7 @@
 		>;
 	};
 
-	mmc2_pins_hs: mmc2_pins_hs {
+	mmc2_pins_hs: mmc2-hs-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
@@ -137,7 +137,7 @@
 		>;
 	};
 
-	mmc2_pins_ddr_3_3v_rev11: mmc2_pins_ddr_3_3v_rev11 {
+	mmc2_pins_ddr_3_3v_rev11: mmc2-ddr-3-3v-rev11-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
@@ -152,7 +152,7 @@
 		>;
 	};
 
-	mmc2_pins_ddr_1_8v_rev11: mmc2_pins_ddr_1_8v_rev11 {
+	mmc2_pins_ddr_1_8v_rev11: mmc2-ddr-1-8v-rev11-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
@@ -167,7 +167,7 @@
 		>;
 	};
 
-	mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 {
+	mmc2_pins_ddr_rev20: mmc2-ddr-rev20-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
@@ -182,7 +182,7 @@
 		>;
 	};
 
-	mmc2_pins_hs200: mmc2_pins_hs200 {
+	mmc2_pins_hs200: mmc2-hs200-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
@@ -197,7 +197,7 @@
 		>;
 	};
 
-	mmc4_pins_default: mmc4_pins_default {
+	mmc4_pins_default: mmc4-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
 			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
@@ -208,7 +208,7 @@
 		>;
 	};
 
-	mmc4_pins_hs: mmc4_pins_hs {
+	mmc4_pins_hs: mmc4-hs-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
 			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
@@ -219,7 +219,7 @@
 		>;
 	};
 
-	mmc3_pins_default: mmc3_pins_default {
+	mmc3_pins_default: mmc3-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
 			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
@@ -230,7 +230,7 @@
 		>;
 	};
 
-	mmc3_pins_hs: mmc3_pins_hs {
+	mmc3_pins_hs: mmc3-hs-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
 			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
@@ -241,7 +241,7 @@
 		>;
 	};
 
-	mmc3_pins_sdr12: mmc3_pins_sdr12 {
+	mmc3_pins_sdr12: mmc3-sdr12-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
 			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
@@ -252,7 +252,7 @@
 		>;
 	};
 
-	mmc3_pins_sdr25: mmc3_pins_sdr25 {
+	mmc3_pins_sdr25: mmc3-sdr25-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
 			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
@@ -263,7 +263,7 @@
 		>;
 	};
 
-	mmc3_pins_sdr50: mmc3_pins_sdr50 {
+	mmc3_pins_sdr50: mmc3-sdr50-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
 			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
@@ -274,7 +274,7 @@
 		>;
 	};
 
-	mmc4_pins_sdr12: mmc4_pins_sdr12 {
+	mmc4_pins_sdr12: mmc4-sdr12-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
 			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
@@ -285,7 +285,7 @@
 		>;
 	};
 
-	mmc4_pins_sdr25: mmc4_pins_sdr25 {
+	mmc4_pins_sdr25: mmc4-sdr25-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
 			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
diff --git a/arch/arm/boot/dts/dra74x-p.dtsi b/arch/arm/boot/dts/ti/omap/dra74x-p.dtsi
index 006189dad7a7..bb5239ae164d 100644
--- a/arch/arm/boot/dts/dra74x-p.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra74x-p.dtsi
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/ti/omap/dra74x.dtsi
index cfb39dde4930..cfb39dde4930 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra74x.dtsi
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/ti/omap/dra76-evm.dts
index 57868ac60d29..cf9c3d35b049 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/dra76-evm.dts
@@ -533,11 +533,11 @@
 };
 
 &extcon_usb1 {
-	vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
 };
 
 &extcon_usb2 {
-	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+	vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
 };
 
 &m_can0 {
diff --git a/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi b/arch/arm/boot/dts/ti/omap/dra76x-mmc-iodelay.dtsi
index fdca48186916..4690554dfa6e 100644
--- a/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra76x-mmc-iodelay.dtsi
@@ -27,7 +27,7 @@
  */
 
 &dra7_pmx_core {
-	mmc1_pins_default: mmc1_pins_default {
+	mmc1_pins_default: mmc1-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
@@ -38,7 +38,7 @@
 		>;
 	};
 
-	mmc1_pins_hs: mmc1_pins_hs {
+	mmc1_pins_hs: mmc1-hs-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
@@ -49,7 +49,7 @@
 		>;
 	};
 
-	mmc1_pins_sdr50: mmc1_pins_sdr50 {
+	mmc1_pins_sdr50: mmc1-sdr50-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_cmd.cmd */
@@ -60,7 +60,7 @@
 		>;
 	};
 
-	mmc1_pins_ddr50: mmc1_pins_ddr50 {
+	mmc1_pins_ddr50: mmc1-ddr50-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
 			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
@@ -71,7 +71,7 @@
 		>;
 	};
 
-	mmc2_pins_default: mmc2_pins_default {
+	mmc2_pins_default: mmc2-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
@@ -86,7 +86,7 @@
 		>;
 	};
 
-	mmc2_pins_hs200: mmc2_pins_hs200 {
+	mmc2_pins_hs200: mmc2-hs200-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
@@ -101,7 +101,7 @@
 		>;
 	};
 
-	mmc3_pins_default: mmc3_pins_default {
+	mmc3_pins_default: mmc3-default-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
 			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
@@ -112,7 +112,7 @@
 		>;
 	};
 
-	mmc4_pins_hs: mmc4_pins_hs {
+	mmc4_pins_hs: mmc4-hs-pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
 			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
diff --git a/arch/arm/boot/dts/ti/omap/dra76x.dtsi b/arch/arm/boot/dts/ti/omap/dra76x.dtsi
new file mode 100644
index 000000000000..50a02c393ea2
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/dra76x.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra74x.dtsi"
+
+/ {
+	compatible = "ti,dra762", "ti,dra7";
+
+	ocp {
+		target-module@42c01900 {
+			compatible = "ti,sysc-dra7-mcan", "ti,sysc";
+			ranges = <0x0 0x42c00000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x42c01900 0x4>,
+			      <0x42c01904 0x4>,
+			      <0x42c01908 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET |
+					 SYSC_DRA7_MCAN_ENAWAKEUP)>;
+			ti,syss-mask = <1>;
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_ADC_CLKCTRL 0>;
+			clock-names = "fck";
+
+			m_can0: mcan@1a00 {
+				compatible = "bosch,m_can";
+				reg = <0x1a00 0x4000>, <0x0 0x18FC>;
+				reg-names = "m_can", "message_ram";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "int0", "int1";
+				clocks = <&l3_iclk_div>, <&mcan_clk>;
+				clock-names = "hclk", "cclk";
+				bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+			};
+		};
+	};
+
+};
+
+&l4_per3 {
+	target-module@1b0000 {			/* 0x489b0000, ap 25 34.0 */
+		compatible = "ti,sysc-omap4", "ti,sysc";
+		reg = <0x1b0000 0x4>,
+		      <0x1b0010 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x1b0000 0x10000>;
+
+		cal: cal@0 {
+			compatible = "ti,dra76-cal";
+			reg = <0x0000 0x400>,
+			      <0x0800 0x40>,
+			      <0x0900 0x40>;
+			reg-names = "cal_top",
+				    "cal_rx_core0",
+				    "cal_rx_core1";
+			interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			ti,camerrx-control = <&scm_conf 0x6dc>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_0: port@0 {
+					reg = <0>;
+				};
+				csi2_1: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
+
+&scm_conf_clocks {
+	/* CTRL_CORE_SMA_SW_0 */
+	clock@3fc {
+		compatible = "ti,clksel";
+		reg = <0x3fc>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_gmac_h14x2_ctrl_ck: clock@20 {
+			reg = <20>;
+			clock-output-names = "dpll_gmac_h14x2_ctrl_ck";
+			compatible = "ti,divider-clock";
+			clocks = <&dpll_gmac_x2_ck>;
+			ti,max-div = <63>;
+			ti,latch-bit = <26>;
+			assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
+			assigned-clock-rates = <80000000>;
+			#clock-cells = <0>;
+		};
+
+		mcan_clk: clock@27 {
+			reg = <27>;
+			clock-output-names = "mcan_clk";
+			compatible = "ti,gate-clock";
+			clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
+			#clock-cells = <0>;
+		};
+
+		dpll_gmac_h14x2_ctrl_mux_ck: clock@29 {
+			reg = <29>;
+			clock-output-names = "dpll_gmac_h14x2_ctrl_mux_ck";
+			compatible = "ti,mux-clock";
+			clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
+			ti,latch-bit = <26>;
+			assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
+			assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
+			#clock-cells = <0>;
+		};
+	};
+};
+
+&rtctarget {
+	status = "disabled";
+};
+
+&usb4_tm {
+	status = "disabled";
+};
+
+&mmc3 {
+	/* dra76x is not affected by i887 */
+	max-frequency = <96000000>;
+};
+
+&cpu0_opp_table {
+	opp-1800000000 {
+		/* OPP Plus */
+		opp-hz = /bits/ 64 <1800000000>;
+		opp-microvolt = <1250000 950000 1250000>,
+				<1250000 950000 1250000>;
+		opp-supported-hw = <0xFF 0x08>;
+	};
+};
+
+&opp_supply_mpu {
+	ti,efuse-settings = <
+	/* uV   offset */
+	1060000 0x0
+	1160000 0x4
+	1210000 0x8
+	1250000 0xC
+	>;
+};
+
+&abb_mpu {
+	ti,abb_info = <
+	/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+	1060000		0	0x0	0 0x02000000 0x01F00000
+	1160000		0	0x4	0 0x02000000 0x01F00000
+	1210000		0	0x8	0 0x02000000 0x01F00000
+	1250000		0	0xC	0 0x02000000 0x01F00000
+	>;
+};
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/dra7xx-clocks.dtsi
index 04a7a6d1d529..0de16ee262cf 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7xx-clocks.dtsi
@@ -285,13 +285,21 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_byp_mux: clock-dpll-core-byp-mux-23@12c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_core_byp_mux";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x012c>;
+	/* CM_CLKSEL_DPLL_CORE */
+	clock@12c {
+		compatible = "ti,clksel";
+		reg = <0x12c>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_core_byp_mux: clock@23 {
+			reg = <23>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "dpll_core_byp_mux";
+			clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dpll_core_ck: clock@120 {
@@ -368,13 +376,21 @@
 		clock-div = <1>;
 	};
 
-	dpll_dsp_byp_mux: clock-dpll-dsp-byp-mux-23@240 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_dsp_byp_mux";
-		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x0240>;
+	/* CM_CLKSEL_DPLL_DSP */
+	clock@240 {
+		compatible = "ti,clksel";
+		reg = <0x240>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_dsp_byp_mux: clock@23 {
+			reg = <23>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "dpll_dsp_byp_mux";
+			clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dpll_dsp_ck: clock@234 {
@@ -410,13 +426,21 @@
 		clock-div = <1>;
 	};
 
-	dpll_iva_byp_mux: clock-dpll-iva-byp-mux-23@1ac {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_iva_byp_mux";
-		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x01ac>;
+	/* CM_CLKSEL_DPLL_IVA */
+	clock@1ac {
+		compatible = "ti,clksel";
+		reg = <0x1ac>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_iva_byp_mux: clock@23 {
+			reg = <23>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "dpll_iva_byp_mux";
+			clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dpll_iva_ck: clock@1a0 {
@@ -452,13 +476,21 @@
 		clock-div = <1>;
 	};
 
-	dpll_gpu_byp_mux: clock-dpll-gpu-byp-mux-23@2e4 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_gpu_byp_mux";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x02e4>;
+	/* CM_CLKSEL_DPLL_GPU */
+	clock@2e4 {
+		compatible = "ti,clksel";
+		reg = <0x2e4>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_gpu_byp_mux: clock@23 {
+			reg = <23>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "dpll_gpu_byp_mux";
+			clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dpll_gpu_ck: clock@2d8 {
@@ -506,13 +538,21 @@
 		clock-div = <1>;
 	};
 
-	dpll_ddr_byp_mux: clock-dpll-ddr-byp-mux-23@21c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_ddr_byp_mux";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x021c>;
+	/* CM_CLKSEL_DPLL_DDR */
+	clock@21c {
+		compatible = "ti,clksel";
+		reg = <0x21c>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_ddr_byp_mux: clock@23 {
+			reg = <23>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "dpll_ddr_byp_mux";
+			clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dpll_ddr_ck: clock@210 {
@@ -535,13 +575,21 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_gmac_byp_mux: clock-dpll-gmac-byp-mux-23@2b4 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_gmac_byp_mux";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x02b4>;
+	/* CM_CLKSEL_DPLL_GMAC */
+	clock@2b4 {
+		compatible = "ti,clksel";
+		reg = <0x2b4>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_gmac_byp_mux: clock@23 {
+			reg = <23>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "dpll_gmac_byp_mux";
+			clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dpll_gmac_ck: clock@2a8 {
@@ -618,13 +666,21 @@
 		clock-div = <1>;
 	};
 
-	dpll_eve_byp_mux: clock-dpll-eve-byp-mux-23@290 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_eve_byp_mux";
-		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x0290>;
+	/* CM_CLKSEL_DPLL_EVE */
+	clock@290 {
+		compatible = "ti,clksel";
+		reg = <0x290>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_eve_byp_mux: clock@23 {
+			reg = <23>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "dpll_eve_byp_mux";
+			clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dpll_eve_ck: clock@284 {
@@ -838,15 +894,23 @@
 		clock-div = <1>;
 	};
 
-	l3_iclk_div: clock-l3-iclk-div-4@100 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "l3_iclk_div";
-		ti,max-div = <2>;
-		ti,bit-shift = <4>;
-		reg = <0x0100>;
-		clocks = <&dpll_core_h12x2_ck>;
-		ti,index-power-of-two;
+	/* CM_CLKSEL_CORE */
+	clock@100 {
+		compatible = "ti,clksel";
+		reg = <0x100>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		l3_iclk_div: clock@4 {
+			reg = <4>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "l3_iclk_div";
+			ti,max-div = <2>;
+			clocks = <&dpll_core_h12x2_ck>;
+			ti,index-power-of-two;
+			#clock-cells = <0>;
+		};
 	};
 
 	l4_root_clk_div: clock-l4-root-clk-div {
@@ -911,12 +975,21 @@
 		ti,index-starts-at-one;
 	};
 
-	abe_dpll_sys_clk_mux: clock-abe-dpll-sys-clk-mux@118 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "abe_dpll_sys_clk_mux";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x0118>;
+	/* CM_CLKSEL_ABE_PLL_SYS */
+	clock@118 {
+		compatible = "ti,clksel";
+		reg = <0x118>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		abe_dpll_sys_clk_mux: clock@0 {
+			reg = <0>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "abe_dpll_sys_clk_mux";
+			clocks = <&sys_clkin1>, <&sys_clkin2>;
+			#clock-cells = <0>;
+		};
 	};
 
 	abe_dpll_bypass_clk_mux: clock-abe-dpll-bypass-clk-mux@114 {
@@ -1018,14 +1091,23 @@
 		ti,index-power-of-two;
 	};
 
-	dsp_gclk_div: clock-dsp-gclk-div@18c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clock-output-names = "dsp_gclk_div";
-		clocks = <&dpll_dsp_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x018c>;
-		ti,index-power-of-two;
+	/* CM_CLKSEL_DPLL_USB */
+	clock@18c {
+		compatible = "ti,clksel";
+		reg = <0x18c>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dsp_gclk_div: clock@0 {
+			reg = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "dsp_gclk_div";
+			clocks = <&dpll_dsp_m2_ck>;
+			ti,max-div = <64>;
+			ti,index-power-of-two;
+			#clock-cells = <0>;
+		};
 	};
 
 	gpu_dclk: clock-gpu-dclk@1a0 {
@@ -1294,7 +1376,6 @@
 		clocks = <&apll_pcie_ck>;
 		#clock-cells = <0>;
 		reg = <0x021c>;
-		ti,dividers = <2>, <1>;
 		ti,bit-shift = <8>;
 		ti,max-div = <2>;
 	};
@@ -1326,13 +1407,21 @@
 		clock-div = <1>;
 	};
 
-	dpll_per_byp_mux: clock-dpll-per-byp-mux-23@14c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_per_byp_mux";
-		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x014c>;
+	/* CM_CLKSEL_DPLL_PER */
+	clock@14c {
+		compatible = "ti,clksel";
+		reg = <0x14c>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_per_byp_mux: clock@23 {
+			reg = <23>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "dpll_per_byp_mux";
+			clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dpll_per_ck: clock@140 {
@@ -1364,13 +1453,21 @@
 		clock-div = <1>;
 	};
 
-	dpll_usb_byp_mux: clock-dpll-usb-byp-mux-23@18c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clock-output-names = "dpll_usb_byp_mux";
-		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x018c>;
+	/* CM_CLKSEL_DPLL_USB */
+	clock@18c {
+		compatible = "ti,clksel";
+		reg = <0x18c>;
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpll_usb_byp_mux: clock@23 {
+			reg = <23>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "dpll_usb_byp_mux";
+			clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dpll_usb_ck: clock@180 {
@@ -1685,7 +1782,7 @@
 		reg = <0x0558>;
 	};
 
-	sys_32k_ck: clock-sys-32k {
+	sys_32k_ck: clock-sys-32k@6c4 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clock-output-names = "sys_32k_ck";
diff --git a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi b/arch/arm/boot/dts/ti/omap/elpida_ecb240abacn.dtsi
index 9698801cbcfb..9698801cbcfb 100644
--- a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
+++ b/arch/arm/boot/dts/ti/omap/elpida_ecb240abacn.dtsi
diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/ti/omap/logicpd-som-lv-35xx-devkit.dts
index 3240c67e0c39..c1705f6f3d10 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
+++ b/arch/arm/boot/dts/ti/omap/logicpd-som-lv-35xx-devkit.dts
@@ -15,7 +15,7 @@
 &omap3_pmx_core2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&hsusb2_2_pins>;
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+	hsusb2_2_pins: hsusb2-2-pins {
 		pinctrl-single,pins = <
 			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
 			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/ti/omap/logicpd-som-lv-37xx-devkit.dts
index c757f0d7781c..9dbbcc7ced7c 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+++ b/arch/arm/boot/dts/ti/omap/logicpd-som-lv-37xx-devkit.dts
@@ -15,7 +15,7 @@
 &omap3_pmx_core2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&hsusb2_2_pins>;
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+	hsusb2_2_pins: hsusb2-2-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
 			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/ti/omap/logicpd-som-lv-baseboard.dtsi
index 7d0468a23781..690f2ad50c65 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
+++ b/arch/arm/boot/dts/ti/omap/logicpd-som-lv-baseboard.dtsi
@@ -141,25 +141,25 @@
 };
 
 &omap3_pmx_core {
-	gpio_key_pins: pinmux_gpio_key_pins {
+	gpio_key_pins: gpio-key-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_xclkb.gpio_111 / uP_GPIO_3*/
 		>;
 	};
 
-	led_pins: pinmux_led_pins {
+	led_pins: led-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x215e, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* sdmmc2_dat1.gpio_133 / uP_GPIO_0 */
 		>;
 	};
 
-	lan9221_pins: pinmux_lan9221_pins {
+	lan9221_pins: lan9221-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
 			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
@@ -172,13 +172,13 @@
 		>;
 	};
 
-	lcd_enable_pin: pinmux_lcd_enable_pin {
+	lcd_enable_pin: lcd-enable-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_fs.gpio_155 */
 		>;
 	};
 
-	dss_dpi_pins1: pinmux_dss_dpi_pins1 {
+	dss_dpi_pins1: dss-dpi1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_pclk.dss_pclk */
 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_hsync.dss_hsync */
@@ -206,13 +206,13 @@
 };
 
 &omap3_pmx_wkup {
-	led_pins_wkup: pinmux_led_pins_wkup {
+	led_pins_wkup: led-wkup-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 / uP_GPIO_1 */
 		>;
 	};
 
-	backlight_pins: pinmux_backlight_pins {
+	backlight_pins: backlight-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* sys_boot6.gpio_8 */
 		>;
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/ti/omap/logicpd-som-lv.dtsi
index 9ba0ea4eb48a..d51a436d9774 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/ti/omap/logicpd-som-lv.dtsi
@@ -51,7 +51,6 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name = "micron,mt29f4g16abbda3w";
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
@@ -157,7 +156,7 @@
 
 &omap3_pmx_core {
 
-	mmc3_pins: pinmux_mm3_pins {
+	mmc3_pins: mm3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat4.sdmmc3_dat0 */
 			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat5.sdmmc3_dat1 */
@@ -167,7 +166,7 @@
 			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs2.sdmmc_clk */
 		>;
 	};
-	mcbsp2_pins: pinmux_mcbsp2_pins {
+	mcbsp2_pins: mcbsp2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx */
 			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)        /* mcbsp2_clkx */
@@ -175,7 +174,7 @@
 			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)       /* mcbsp2_dx */
 		>;
 	};
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
 			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
@@ -184,7 +183,7 @@
 			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* GPIO_162,BT_EN */
 		>;
 	};
-	mcspi1_pins: pinmux_mcspi1_pins {
+	mcspi1_pins: mcspi1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)        /* mcspi1_clk.mcspi1_clk */
 			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_simo.mcspi1_simo */
@@ -193,7 +192,7 @@
 		>;
 	};
 
-	hsusb2_pins: pinmux_hsusb2_pins {
+	hsusb2_pins: hsusb2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi1_cs3.hsusb2_data2 */
 			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_clk.hsusb2_data7 */
@@ -204,7 +203,7 @@
 		>;
 	};
 
-	hsusb_otg_pins: pinmux_hsusb_otg_pins {
+	hsusb_otg_pins: hsusb-otg-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
 			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
@@ -221,7 +220,7 @@
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
 			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
@@ -229,21 +228,21 @@
 		>;
 	};
 
-	i2c2_pins: pinmux_i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)	/* i2c2_scl */
 			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
 
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl */
 			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
-	tsc2004_pins: pinmux_tsc2004_pins {
+	tsc2004_pins: tsc2004-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4)	/* mcbsp4_dr.gpio_153 */
 		>;
@@ -252,12 +251,12 @@
 
 &omap3_pmx_wkup {
 
-	hsusb2_reset_pin: pinmux_hsusb1_reset_pin {
+	hsusb2_reset_pin: hsusb1-reset-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
 		>;
 	};
-	wl127x_gpio: pinmux_wl127x_gpio_pin {
+	wl127x_gpio: wl127x-gpio-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4)		/* sys_boot0.gpio_2 */
 			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
diff --git a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-35xx-devkit.dts
index cb08aa62d967..eaa583fdc3d6 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
+++ b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-35xx-devkit.dts
@@ -13,7 +13,7 @@
 };
 
 &omap3_pmx_core {
-	isp1763_pins: pinmux_isp1763_pins {
+	isp1763_pins: isp1763-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2154,  PIN_INPUT_PULLUP | MUX_MODE4)	/* sdmmc1_dat6.gpio_128 */
 		>;
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit-28.dts
index b5536132971f..b5536132971f 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts
+++ b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit-28.dts
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts
index 07ea822fe405..fbff15a0a0fe 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts
@@ -52,7 +52,7 @@
 
 &uart2 {
 	/delete-property/dma-names;
-	bluetooth {
+	bluetooth-gnss {
 		compatible = "ti,wl1283-st";
 		enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio 162 */
 		max-speed = <3000000>;
@@ -65,7 +65,7 @@
 };
 
 &omap3_pmx_core {
-	mmc3_pins: pinmux_mm3_pins {
+	mmc3_pins: mm3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat4.sdmmc3_dat0 */
 			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat5.sdmmc3_dat1 */
@@ -78,7 +78,7 @@
 };
 
 &omap3_pmx_core2 {
-	mmc3_core2_pins: pinmux_mmc3_core2_pins {
+	mmc3_core2_pins: mmc3-core2-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)   /* etk_clk.sdmmc3_clk */
 			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2)   /* etk_ctl.sdmmc3_cmd */
@@ -88,7 +88,7 @@
 
 /* The gpio muxing between omap3530 and dm3730 is different for GPIO_128 */
 &omap3_pmx_wkup {
-	isp1763_pins: pinmux_isp1763_pins {
+	isp1763_pins: isp1763-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a58, PIN_INPUT_PULLUP | MUX_MODE4)	/* reserved.gpio_128 */
 		>;
diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-baseboard.dtsi
index d3da8b1b473b..e0caed539810 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-baseboard.dtsi
@@ -59,7 +59,7 @@
 		};
 	};
 
-	pwm10: dmtimer-pwm {
+	pwm10: pwm-10 {
 		compatible = "ti,omap-dmtimer-pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm_pins>;
@@ -209,33 +209,33 @@
 };
 
 &omap3_pmx_core {
-	gpio_key_pins: pinmux_gpio_key_pins {
+	gpio_key_pins: gpio-key-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcspi2_clk.gpio_178 */
 			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcspi2_cs0.gpio_181 */
 		>;
 	};
 
-	hdq_pins: hdq_pins {
+	hdq_pins: hdq-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* hdq_sio */
 		>;
 	};
 
-	pwm_pins: pinmux_pwm_pins {
+	pwm_pins: pwm-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3)       /* gpmc_ncs5.gpt_10_pwm_evt */
 		>;
 	};
 
-	led_pins: pinmux_led_pins {
+	led_pins: led-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4)	/* gpio_179 */
 			OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4)	/* gpio_180 */
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
 			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
@@ -246,19 +246,19 @@
 		>;
 	};
 
-	tsc2004_pins: pinmux_tsc2004_pins {
+	tsc2004_pins: tsc2004-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4)	/* mcbsp4_dr.gpio_153 */
 		>;
 	};
 
-	backlight_pins: pinmux_backlight_pins {
+	backlight_pins: backlight-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_dx.gpio_154 */
 		>;
 	};
 
-	isp_pins: pinmux_isp_pins {
+	isp_pins: isp-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0)   /* cam_hs.cam_hs */
 			OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0)   /* cam_vs.cam_vs */
@@ -276,13 +276,13 @@
 		>;
 	};
 
-	panel_pwr_pins: pinmux_panel_pwr_pins {
+	panel_pwr_pins: panel-pwr-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_fs.gpio_155 */
 		>;
 	};
 
-	dss_dpi_pins1: pinmux_dss_dpi_pins1 {
+	dss_dpi_pins1: dss-dpi1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_pclk.dss_pclk */
 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_hsync.dss_hsync */
@@ -313,20 +313,20 @@
 };
 
 &omap3_pmx_wkup {
-	gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
+	gpio_key_pins_wkup: gpio-key-wkup-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_boot0.gpio_2 */
 			OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_boot5.gpio_7 */
 		>;
 	};
 
-	lan9221_pins: pinmux_lan9221_pins {
+	lan9221_pins: lan9221-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)		/* reserved.gpio_129 */
 		>;
 	};
 
-	mmc1_cd: pinmux_mmc1_cd {
+	mmc1_cd: mmc1-cd-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4)	/* reserved.gpio_127 */
 		>;
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-som.dtsi
index 3a5228562b0d..0b65ac5b4230 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-som.dtsi
@@ -20,7 +20,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		user0 {
+		led-user0 {
 			label = "user0";
 			gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* LEDA */
 			linux,default-trigger = "none";
@@ -49,7 +49,6 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name = "micron,mt29f4g16abbda3w";
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
@@ -103,7 +102,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c3_pins>;
 	clock-frequency = <400000>;
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c64";
 		readonly;
 		reg = <0x50>;
@@ -111,7 +110,7 @@
 };
 
 &omap3_pmx_core {
-	mcbsp2_pins: pinmux_mcbsp2_pins {
+	mcbsp2_pins: mcbsp2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx */
 			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)        /* mcbsp2_clkx */
@@ -119,7 +118,7 @@
 			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)       /* mcbsp2_dx */
 		>;
 	};
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
 			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
@@ -128,7 +127,7 @@
 			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* GPIO_162,BT_EN */
 		>;
 	};
-	mcspi1_pins: pinmux_mcspi1_pins {
+	mcspi1_pins: mcspi1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)        /* mcspi1_clk.mcspi1_clk */
 			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_simo.mcspi1_simo */
@@ -136,7 +135,7 @@
 			OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_cs0.mcspi1_cs0 */
 		>;
 	};
-	hsusb_otg_pins: pinmux_hsusb_otg_pins {
+	hsusb_otg_pins: hsusb-otg-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
 			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
@@ -153,19 +152,19 @@
 			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
 		>;
 	};
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
 			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
 		>;
 	};
-	i2c2_pins: pinmux_i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)	/* i2c2_scl */
 			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl */
 			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda */
diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/ti/omap/motorola-cpcap-mapphone.dtsi
index ea02fd403a9b..ea02fd403a9b 100644
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/ti/omap/motorola-cpcap-mapphone.dtsi
diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi
new file mode 100644
index 000000000000..a0c53d9c2625
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi
@@ -0,0 +1,458 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "omap443x.dtsi"
+#include "motorola-cpcap-mapphone.dtsi"
+
+/ {
+	/*
+	 * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
+	 * then 1023 - 1024 seems to contain mbm.
+	 */
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x3fd00000>;	/* 1021 MB */
+	};
+
+	/* Poweroff GPIO probably connected to CPCAP */
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff_gpio>;
+		pinctrl-names = "default";
+		gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;	/* gpio50 */
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		pinctrl-0 = <&hdmi_hpd_gpio>;
+		pinctrl-names = "default";
+		label = "hdmi";
+		type = "d";
+
+		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;	/* gpio63 */
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+
+	/*
+	 * HDMI 5V regulator probably sourced from battery. Let's keep
+	 * keep this as always enabled for HDMI to work until we've
+	 * figured what the encoder chip is.
+	 */
+	hdmi_regulator: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>;	/* gpio59 */
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	/* This is probably coming straight from the battery.. */
+	wl12xx_vmmc: regulator-wl12xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1650000>;
+		regulator-max-microvolt = <1650000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;	/* gpio94 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	soundcard {
+		compatible = "audio-graph-card";
+		label = "Mapphone Audio";
+
+		widgets =
+			"Speaker", "Earpiece",
+			"Speaker", "Loudspeaker",
+			"Headphone", "Headphone Jack",
+			"Microphone", "Internal Mic";
+
+		routing =
+			"Earpiece", "EP",
+			"Loudspeaker", "SPKR",
+			"Headphone Jack", "HSL",
+			"Headphone Jack", "HSR",
+			"MICR", "Internal Mic";
+
+		dais = <&mcbsp2_port>, <&mcbsp3_port>;
+	};
+};
+
+&cpu_thermal {
+	polling-delay = <10000>; /* milliseconds */
+};
+
+&cpu_alert0 {
+        temperature = <80000>; /* millicelsius */
+};
+
+&cpu0 {
+        /*
+	 * Note that the 1.2GiHz mode is enabled for all SoC variants for
+	 * the Motorola Android Linux v3.0.8 based kernel.
+	 */
+        operating-points = <
+	        /* kHz    uV */
+	        300000  1025000
+	        600000  1200000
+	        800000  1313000
+	        1008000 1375000
+		1200000 1375000
+        >;
+};
+
+&dss {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+	pinctrl-0 = <&dss_hdmi_pins>;
+	pinctrl-names = "default";
+	vdda-supply = <&vdac>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_connector_in>;
+			lanes = <1 0 3 2 5 4 7 6>;
+		};
+	};
+};
+
+&i2c1 {
+	tmp105@48 {
+		compatible = "ti,tmp105";
+		reg = <0x48>;
+		pinctrl-0 = <&tmp105_irq>;
+		pinctrl-names = "default";
+		/* kpd_row0.gpio_178 */
+		interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING
+				       &omap4_pmx_core 0x14e>;
+		interrupt-names = "irq", "wakeup";
+		wakeup-source;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vwlan2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* gpio176 */
+};
+
+&mmc2 {
+	vmmc-supply = <&vsdio>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	/* uart2_tx.sdmmc3_dat1 pad as wakeirq */
+	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0xde>;
+	interrupt-names = "irq", "wakeup";
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1285";
+		reg = <2>;
+		/* gpio_100 with gpmc_wait2 pad as wakeirq */
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>,
+				      <&omap4_pmx_core 0x4e>;
+		interrupt-names = "irq", "wakeup";
+		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&omap4_pmx_core {
+
+	/* hdmi_hpd.gpio_63 */
+	hdmi_hpd_gpio: hdmi-hpd-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
+		>;
+	};
+
+	/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
+	dss_hdmi_pins: dss-hdmi-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)
+		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)
+		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)
+		>;
+	};
+
+	/*
+	 * Android uses PIN_OFF_INPUT_PULLDOWN | PIN_INPUT_PULLUP | MUX_MODE3
+	 * for gpio_100, but the internal pull makes wlan flakey on some
+	 * devices. Off mode value should be tested if we have off mode working
+	 * later on.
+	 */
+	mmc3_pins: mmc3-pins {
+		pinctrl-single,pins = <
+		/* 0x4a10008e gpmc_wait2.gpio_100 d23 */
+		OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3)
+
+		/* 0x4a100102 abe_mcbsp1_dx.sdmmc3_dat2 ab25 */
+		OMAP4_IOPAD(0x102, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a100104 abe_mcbsp1_fsx.sdmmc3_dat3 ac27 */
+		OMAP4_IOPAD(0x104, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a100118 uart2_cts.sdmmc3_clk ab26 */
+		OMAP4_IOPAD(0x118, PIN_INPUT | MUX_MODE1)
+
+		/* 0x4a10011a uart2_rts.sdmmc3_cmd ab27 */
+		OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a10011c uart2_rx.sdmmc3_dat0 aa25 */
+		OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a10011e uart2_tx.sdmmc3_dat1 aa26 */
+		OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE1)
+		>;
+	};
+
+	/* gpmc_ncs0.gpio_50 */
+	poweroff_gpio: poweroff-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	/* kpd_row0.gpio_178 */
+	tmp105_irq: tmp105-irq-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	usb_gpio_mux_sel1: usb-gpio-mux-sel1-pins {
+		/* gpio_60 */
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)
+		>;
+	};
+
+	usb_ulpi_pins: usb-ulpi-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x196, MUX_MODE7)
+		OMAP4_IOPAD(0x198, MUX_MODE7)
+		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	/* usb0_otg_dp and usb0_otg_dm */
+	usb_utmi_pins: usb-utmi-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)
+		OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)
+		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+
+	/*
+	 * Note that the v3.0.8 stock userspace dynamically remuxes uart1
+	 * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7
+	 * when not used. If needed, we can add rts pin remux later based
+	 * on power measurements.
+	 */
+	uart1_pins: uart1-pins {
+		pinctrl-single,pins = <
+		/* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */
+		OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */
+		OMAP4_IOPAD(0x13e, MUX_MODE1)
+
+		/* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */
+		OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1)
+
+		/* 0x4a1001ca dpm_emu14.uart1_rx aa3 */
+		OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2)
+		>;
+	};
+
+	/* uart3_tx_irtx and uart3_rx_irrx */
+	uart3_pins: uart3-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x196, MUX_MODE7)
+		OMAP4_IOPAD(0x198, MUX_MODE7)
+		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1ba, MUX_MODE2)
+		OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2)
+		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+
+	uart4_pins: uart4-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)		/* uart4_rx */
+		OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)		/* uart4_tx */
+		OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5)	/* uart4_cts */
+		OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5)	/* uart4_rts */
+		>;
+	};
+
+	mcbsp2_pins: mcbsp2-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_clkx */
+		OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_dr */
+		OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0)	/* abe_mcbsp2_dx */
+		OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_fsx */
+		>;
+	};
+
+	mcbsp3_pins: mcbsp3-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_dr */
+		OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1)	/* abe_mcbsp3_dx */
+		OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_clkx */
+		OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_fsx */
+		>;
+	};
+};
+
+&omap4_pmx_wkup {
+	usb_gpio_mux_sel2: usb-gpio-mux-sel2-pins {
+		/* gpio_wk0 */
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+};
+
+/* RNG is used by secure mode and not accessible */
+&rng_target {
+	status = "disabled";
+};
+
+/*
+ * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149
+ * for wake-up events for both the USB PHY and the UART. We can use gpio_149
+ * pad as the shared wakeirq for the UART rather than the RX or CTS pad as we
+ * have gpio_149 trigger before the UART transfer starts.
+ */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0x110>;
+	uart-has-rtscts;
+	current-speed = <115200>;
+};
+
+&uart3 {
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0x17c>;
+	overrun-throttle-ms = <500>;
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+
+	bluetooth {
+		compatible = "ti,wl1285-st";
+		enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */
+		max-speed = <3686400>;
+	};
+};
+
+/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+
+	/*
+	 * Max 300 mA steps based on similar PMIC MC13783UG.pdf "Table 10-4.
+	 * VBUS Regulator Main Characteristics". Binding uses 2 mA units.
+	 */
+	power = <150>;
+};
+
+&mcbsp2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
+
+	mcbsp2_port: port {
+		cpu_dai2: endpoint {
+			dai-format = "i2s";
+			remote-endpoint = <&cpcap_audio_codec0>;
+			frame-master = <&cpcap_audio_codec0>;
+			bitclock-master = <&cpcap_audio_codec0>;
+		};
+	};
+};
+
+&mcbsp3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp3_pins>;
+	status = "okay";
+
+	mcbsp3_port: port {
+		cpu_dai3: endpoint {
+			dai-format = "dsp_a";
+			frame-master = <&cpcap_audio_codec1>;
+			bitclock-master = <&cpcap_audio_codec1>;
+			remote-endpoint = <&cpcap_audio_codec1>;
+		};
+	};
+};
+
+&cpcap_audio_codec0 {
+	remote-endpoint = <&cpu_dai2>;
+};
+
+&cpcap_audio_codec1 {
+	remote-endpoint = <&cpu_dai3>;
+};
diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi
new file mode 100644
index 000000000000..f3f9ff02b35f
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+/ {
+	/* FS USB Host PHY on port 1 for mdm6600 */
+	fsusb1_phy: usb-phy@1 {
+		compatible = "motorola,mapphone-mdm6600";
+		pinctrl-0 = <&usb_mdm6600_pins>;
+		pinctrl-1 = <&usb_mdm6600_sleep_pins>;
+		pinctrl-names = "default", "sleep";
+		enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
+		power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;	/* gpio_54 */
+		reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;	/* gpio_49 */
+		/* mode: gpio_148 gpio_149 */
+		motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
+				      <&gpio5 21 GPIO_ACTIVE_HIGH>;
+		/* cmd: gpio_103 gpio_104 gpio_142 */
+		motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
+				     <&gpio4 8 GPIO_ACTIVE_HIGH>,
+				     <&gpio5 14 GPIO_ACTIVE_HIGH>;
+		/* status: gpio_52 gpio_53 gpio_55 */
+		motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
+					<&gpio2 21 GPIO_ACTIVE_HIGH>,
+					<&gpio2 23 GPIO_ACTIVE_HIGH>;
+		#phy-cells = <0>;
+	};
+
+	/* HS USB host TLL nop-phy on port 2 for w3glte */
+	hsusb2_phy: usb-phy@2 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	pwm8: pwm-8 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_direction_pin>;
+
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer8>;
+		ti,clock-source = <0x01>;
+	};
+
+	pwm9: pwm-9 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_enable_pin>;
+
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer9>;
+		ti,clock-source = <0x01>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
+		pwm-names = "enable", "direction";
+		direction-duty-cycle-ns = <10000000>;
+	};
+};
+
+/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
+&hdqw1w {
+	pinctrl-0 = <&hdq_pins>;
+	pinctrl-names = "default";
+	ti,mode = "1w";
+};
+
+&i2c2 {
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
+
+		/* gpio_183 with sys_nirq2 pad as wakeup */
+		interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
+				      <&omap4_pmx_core 0x160>;
+		interrupt-names = "irq", "wakeup";
+		wakeup-source;
+	};
+
+	isl29030@44 {
+		compatible = "isil,isl29030";
+		reg = <0x44>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&als_proximity_pins>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
+	};
+};
+
+&omap4_pmx_core {
+	hdq_pins: hdq-pins {
+		pinctrl-single,pins = <
+		/* 0x4a100120 hdq_sio.hdq_sio aa27 */
+		OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
+		>;
+	};
+
+	/* kpd_row0.gpio_178 */
+	tmp105_irq: tmp105-irq-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	touchscreen_pins: touchscreen-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	usb_mdm6600_pins: usb-mdm6600-pins {
+		pinctrl-single,pins = <
+		/* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
+		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+
+		/* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
+		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+
+		/* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
+		OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
+
+		/* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
+		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+
+		/* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
+		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+
+		/* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
+		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+
+		/* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
+		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+
+		/* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
+		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+
+		/* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
+		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+
+		/* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
+		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+
+		/* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
+		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+		>;
+	};
+
+	/* Modem sleep pins to keep gpio_49 high with internal pull */
+	usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */
+		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+		>;
+	};
+
+	als_proximity_pins: als-proximity-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	vibrator_direction_pin: vibrator-direction-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)	/* dmtimer8_pwm_evt (gpio_27) */
+		>;
+	};
+
+	vibrator_enable_pin: vibrator-enable-pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)	/* dmtimer9_pwm_evt (gpio_28) */
+		>;
+	};
+};
+
+/* Configure pwm clock source for timers 8 & 9 */
+&timer8 {
+	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&timer9 {
+	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&usbhsohci {
+	phys = <&fsusb1_phy>;
+	phy-names = "usb";
+};
+
+&usbhsehci {
+	phys = <&hsusb2_phy>;
+};
+
+&usbhshost {
+	port1-mode = "ohci-phy-4pin-dpdm";
+	port2-mode = "ehci-tll";
+};
+
+&i2c4 {
+	ak8975: magnetometer@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+
+		vdd-supply = <&vhvio>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
+
+		rotation-matrix = "-1", "0", "0",
+				  "0", "1", "0",
+				  "0", "0", "-1";
+
+	};
+};
diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi
new file mode 100644
index 000000000000..a356b3a2f24e
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+&keypad {
+	keypad,num-rows = <8>;
+	keypad,num-columns = <8>;
+	linux,keymap = <MATRIX_KEY(5, 0, KEY_VOLUMEUP)>,
+		       <MATRIX_KEY(3, 0, KEY_VOLUMEDOWN)>;
+};
+
+/*
+ * On tablets, mmc1 regulator is vsimcard instead of vwlan2 in the stock kernel
+ * dtb. The regulator may not be wired even if a MMC cage is added though.
+ */
+&mmc1 {
+	vmmc-supply = <&vsimcard>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* gpio_176 */
+};
diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi
new file mode 100644
index 000000000000..8b8de92b5424
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-handset.dtsi"
+
+/ {
+	backlight: backlight {
+		compatible = "led-backlight";
+
+		leds = <&backlight_led>;
+		brightness-levels = <31 63 95 127 159 191 223 255>;
+		default-brightness-level = <6>;
+	};
+
+	/* LCD regulator from sw5 source */
+	lcd_regulator: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd";
+		regulator-min-microvolt = <5050000>;
+		regulator-max-microvolt = <5050000>;
+		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;	/* gpio96 */
+		enable-active-high;
+		vin-supply = <&sw5>;
+	};
+};
+
+&dsi1 {
+	status = "okay";
+	vdd-supply = <&vcsi>;
+
+	port {
+		dsi1_out_ep: endpoint {
+			remote-endpoint = <&lcd0_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd0: panel@0 {
+		compatible = "motorola,droid4-panel", "panel-dsi-cm";
+		reg = <0>;
+		label = "lcd0";
+		vddi-supply = <&lcd_regulator>;
+		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
+		backlight = <&backlight>;
+
+		width-mm = <50>;
+		height-mm = <89>;
+		rotation = <90>;
+
+		panel-timing {
+			clock-frequency = <0>;		/* Calculated by dsi */
+
+			hback-porch = <2>;
+			hactive = <540>;
+			hfront-porch = <0>;
+			hsync-len = <2>;
+
+			vback-porch = <1>;
+			vactive = <960>;
+			vfront-porch = <0>;
+			vsync-len = <1>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd0_in: endpoint {
+				remote-endpoint = <&dsi1_out_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/ti/omap/omap-gpmc-smsc911x.dtsi
index ce6c235f68ec..3046ec572632 100644
--- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap-gpmc-smsc911x.dtsi
@@ -8,9 +8,9 @@
 
 / {
 	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
 	};
 
 	vdd33a: regulator-vdd33a {
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/ti/omap/omap-gpmc-smsc9221.dtsi
index e7534fe9c53c..bc8961f3690f 100644
--- a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap-gpmc-smsc9221.dtsi
@@ -12,9 +12,9 @@
 
 / {
 	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
 	};
 
 	vdd33a: regulator-vdd33a {
diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/ti/omap/omap-zoom-common.dtsi
index 1e96c865d41d..8adc0ef01f6c 100644
--- a/arch/arm/boot/dts/omap-zoom-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap-zoom-common.dtsi
@@ -14,7 +14,7 @@
 	 * they probably share the same GPIO IRQ
 	 * REVISIT: Add timing support from slls644g.pdf
 	 */
-	uart@3,0 {
+	serial@3,0 {
 		compatible = "ns16550a";
 		reg = <3 0 8>;	/* CS3, offset 0, IO size 8 */
 		bank-width = <2>;
@@ -50,7 +50,7 @@
 		gpmc,wr-data-mux-bus-ns = <45>;
 		gpmc,wr-access-ns = <145>;
 	};
-	uart@3,1 {
+	serial@3,1 {
 		compatible = "ns16550a";
 		reg = <3 0x100 8>;	/* CS3, offset 0x100, IO size 8 */
 		bank-width = <2>;
@@ -61,7 +61,7 @@
 		clock-frequency = <1843200>;
 		current-speed = <115200>;
 	};
-	uart@3,2 {
+	serial@3,2 {
 		compatible = "ns16550a";
 		reg = <3 0x200 8>;	/* CS3, offset 0x200, IO size 8 */
 		bank-width = <2>;
@@ -72,7 +72,7 @@
 		clock-frequency = <1843200>;
 		current-speed = <115200>;
 	};
-	uart@3,3 {
+	serial@3,3 {
 		compatible = "ns16550a";
 		reg = <3 0x300 8>;	/* CS3, offset 0x300, IO size 8 */
 		bank-width = <2>;
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/ti/omap/omap2.dtsi
index afabb36a8ac1..afabb36a8ac1 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap2.dtsi
diff --git a/arch/arm/boot/dts/omap2420-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap2420-clocks.dtsi
index 00a7a199a91c..00a7a199a91c 100644
--- a/arch/arm/boot/dts/omap2420-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap2420-clocks.dtsi
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/ti/omap/omap2420-h4.dts
index 5acf5dd87c59..5acf5dd87c59 100644
--- a/arch/arm/boot/dts/omap2420-h4.dts
+++ b/arch/arm/boot/dts/ti/omap/omap2420-h4.dts
diff --git a/arch/arm/boot/dts/omap2420-n800.dts b/arch/arm/boot/dts/ti/omap/omap2420-n800.dts
index f06d767e818b..f06d767e818b 100644
--- a/arch/arm/boot/dts/omap2420-n800.dts
+++ b/arch/arm/boot/dts/ti/omap/omap2420-n800.dts
diff --git a/arch/arm/boot/dts/omap2420-n810-wimax.dts b/arch/arm/boot/dts/ti/omap/omap2420-n810-wimax.dts
index ac9acbd609b6..ac9acbd609b6 100644
--- a/arch/arm/boot/dts/omap2420-n810-wimax.dts
+++ b/arch/arm/boot/dts/ti/omap/omap2420-n810-wimax.dts
diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/ti/omap/omap2420-n810.dts
index 09c1dbc0bb69..3bf8175d85a8 100644
--- a/arch/arm/boot/dts/omap2420-n810.dts
+++ b/arch/arm/boot/dts/ti/omap/omap2420-n810.dts
@@ -23,7 +23,7 @@
 };
 
 &omap2420_pmx {
-	mcbsp2_pins: mcbsp2_pins {
+	mcbsp2_pins: mcbsp2-pins {
 		pinctrl-single,pins = <
 			OMAP2420_CORE_IOPAD(0x0124, PIN_INPUT | MUX_MODE1)	/* eac_ac_sclk.mcbsp2_clkx */
 			OMAP2420_CORE_IOPAD(0x0125, PIN_INPUT | MUX_MODE1)	/* eac_ac_fs.mcbsp2_fsx */
@@ -32,7 +32,7 @@
 		>;
 	};
 
-	aic33_pins: aic33_pins {
+	aic33_pins: aic33-pins {
 		pinctrl-single,pins = <
 			OMAP2420_CORE_IOPAD(0x0129, PIN_OUTPUT | MUX_MODE3)	/* eac_ac_rst.gpio118 */
 			OMAP2420_CORE_IOPAD(0x00e8, PIN_OUTPUT | MUX_MODE2)	/* vlynq_tx1.sys_clkout2 */
diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi
index 63b0b4921e4e..63b0b4921e4e 100644
--- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/ti/omap/omap2420.dtsi
index 821da51cb870..821da51cb870 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap2420.dtsi
diff --git a/arch/arm/boot/dts/omap2430-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap2430-clocks.dtsi
index 4e5ab5189476..4e5ab5189476 100644
--- a/arch/arm/boot/dts/omap2430-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap2430-clocks.dtsi
diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/ti/omap/omap2430-sdp.dts
index 207070677e3a..207070677e3a 100644
--- a/arch/arm/boot/dts/omap2430-sdp.dts
+++ b/arch/arm/boot/dts/ti/omap/omap2430-sdp.dts
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/ti/omap/omap2430.dtsi
index b9a9e6e45266..b9a9e6e45266 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap2430.dtsi
diff --git a/arch/arm/boot/dts/omap24xx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap24xx-clocks.dtsi
index 07af87edf0e2..07af87edf0e2 100644
--- a/arch/arm/boot/dts/omap24xx-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap24xx-clocks.dtsi
diff --git a/arch/arm/boot/dts/omap3-beagle-ab4.dts b/arch/arm/boot/dts/ti/omap/omap3-beagle-ab4.dts
index 990ff2d84686..990ff2d84686 100644
--- a/arch/arm/boot/dts/omap3-beagle-ab4.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-beagle-ab4.dts
diff --git a/arch/arm/boot/dts/omap3-beagle-xm-ab.dts b/arch/arm/boot/dts/ti/omap/omap3-beagle-xm-ab.dts
index cb6968a8bce8..cb6968a8bce8 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm-ab.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-beagle-xm-ab.dts
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts
index 35eced6521ef..08ee0f8ea68f 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "TI OMAP3 BeagleBoard xM";
-	compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap3";
 
 	cpus {
 		cpu@0 {
@@ -90,7 +90,7 @@
 	};
 
 	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
+	hsusb2_phy: hsusb2-phy-pins {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
 		vcc-supply = <&hsusb2_power>;
@@ -183,13 +183,13 @@
 };
 
 &omap3_pmx_wkup {
-	gpio1_pins: pinmux_gpio1_pins {
+	gpio1_pins: gpio1-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
 		>;
 	};
 
-	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
+	dss_dpi_pins2: dss-dpi1-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
 			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
@@ -207,14 +207,14 @@
 			&hsusb2_pins
 	>;
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
 			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
 		>;
 	};
 
-	hsusb2_pins: pinmux_hsusb2_pins {
+	hsusb2_pins: hsusb2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
 			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
@@ -225,7 +225,7 @@
 		>;
 	};
 
-	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
+	dss_dpi_pins1: dss-dpi2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
@@ -261,7 +261,7 @@
 			&hsusb2_2_pins
 	>;
 
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+	hsusb2_2_pins: hsusb2-2-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
 			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/ti/omap/omap3-beagle.dts
index 0548b391334f..4d9a8eab6abf 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-beagle.dts
@@ -28,18 +28,18 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pmu_stat {
+		led-pmu-stat {
 			label = "beagleboard::pmu_stat";
 			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
 		};
 
-		heartbeat {
+		led-heartbeat {
 			label = "beagleboard::usr0";
 			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
 			linux,default-trigger = "heartbeat";
 		};
 
-		mmc {
+		led-mmc {
 			label = "beagleboard::usr1";
 			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
 			linux,default-trigger = "mmc0";
@@ -57,7 +57,7 @@
 	};
 
 	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
+	hsusb2_phy: hsusb2-phy-pins {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;	/* gpio_147 */
 		vcc-supply = <&hsusb2_power>;
@@ -170,7 +170,7 @@
 };
 
 &omap3_pmx_wkup {
-	gpio1_pins: pinmux_gpio1_pins {
+	gpio1_pins: gpio1-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
 		>;
@@ -183,7 +183,7 @@
 			&hsusb2_pins
 	>;
 
-	hsusb2_pins: pinmux_hsusb2_pins {
+	hsusb2_pins: hsusb2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
 			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
@@ -194,20 +194,20 @@
 		>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
 			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
-	tfp410_pins: pinmux_tfp410_pins {
+	tfp410_pins: tfp410-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
 		>;
 	};
 
-	dss_dpi_pins: pinmux_dss_dpi_pins {
+	dss_dpi_pins: dss-dpi-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
@@ -247,7 +247,7 @@
 			&hsusb2_2_pins
 	>;
 
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+	hsusb2_2_pins: hsusb2-2-pins {
 		pinctrl-single,pins = <
 			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
 			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/ti/omap/omap3-cm-t3517.dts
index 3b8349094baa..f776e0527049 100644
--- a/arch/arm/boot/dts/omap3-cm-t3517.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-cm-t3517.dts
@@ -11,12 +11,12 @@
 	model = "CompuLab CM-T3517";
 	compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
 
-	vmmc:  regulator-vmmc {
-                compatible = "regulator-fixed";
-                regulator-name = "vmmc";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-        };
+	vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
 	wl12xx_vmmc2: wl12xx_vmmc2 {
 		compatible = "regulator-fixed";
@@ -43,7 +43,7 @@
 
 &omap3_pmx_wkup {
 
-	wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
+	wl12xx_wkup_pins: wl12xx-wkup-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
 			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE4)	/* sys_boot4.gpio_6 */
@@ -53,25 +53,25 @@
 
 &omap3_pmx_core {
 
-	phy1_reset_pins: pinmux_hsusb1_phy_reset_pins {
+	phy1_reset_pins: hsusb1-phy-reset-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE4)	/* uart2_tx.gpio_146 */
 		>;
 	};
 
-	phy2_reset_pins: pinmux_hsusb2_phy_reset_pins {
+	phy2_reset_pins: hsusb2-phy-reset-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x217a, PIN_OUTPUT | MUX_MODE4)	/* uart2_rx.gpio_147 */
 		>;
 	};
 
-	otg_drv_vbus: pinmux_otg_drv_vbus {
+	otg_drv_vbus: otg-drv-vbus-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50MHz_clk.usb0_drvvbus */
 		>;
 	};
 
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
 			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
@@ -82,14 +82,14 @@
 		>;
 	};
 
-	wl12xx_core_pins: pinmux_wl12xx_core_pins {
+	wl12xx_core_pins: wl12xx-core-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs5.gpio_56 */
 			OMAP3_CORE1_IOPAD(0x2176, PIN_INPUT_PULLUP | MUX_MODE4)	/* uart2_rts.gpio_145 */
 		>;
 	};
 
-	usb_hub_pins: pinmux_usb_hub_pins {
+	usb_hub_pins: usb-hub-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2184, PIN_OUTPUT | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 - USB HUB RST */
 		>;
diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/ti/omap/omap3-cm-t3530.dts
index bc545ee23e71..0c6f14963e5e 100644
--- a/arch/arm/boot/dts/omap3-cm-t3530.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-cm-t3530.dts
@@ -23,7 +23,7 @@
 };
 
 &omap3_pmx_core {
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
 			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/ti/omap/omap3-cm-t3730.dts
index 48e48b0c8190..f1a8f0fd7a83 100644
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-cm-t3730.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "CompuLab CM-T3730";
-	compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3";
 
 	wl12xx_vmmc2: wl12xx_vmmc2 {
 		compatible = "regulator-fixed";
@@ -33,7 +33,7 @@
 };
 
 &omap3_pmx_wkup {
-	dss_dpi_pins_cm_t3730: pinmux_dss_dpi_pins_cm_t3730 {
+	dss_dpi_pins_cm_t3730: dss-dpi-cm-t3730-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a08, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
 			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
@@ -47,7 +47,7 @@
 
 &omap3_pmx_core {
 
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
 			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
@@ -58,7 +58,7 @@
 		>;
 	};
 
-	wl12xx_gpio: pinmux_wl12xx_gpio {
+	wl12xx_gpio: wl12xx-gpio-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)	/* dss_data3.gpio_73 */
 			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)	/* sdmmc2_dat4.gpio_136 */
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/ti/omap/omap3-cm-t3x.dtsi
index e61b8a2bfb7d..cd13826d033d 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-cm-t3x.dtsi
@@ -47,7 +47,7 @@
 	};
 
 	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
+	hsusb2_phy: hsusb2-phy-pins {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&hsusb2_power>;
 		#phy-cells = <0>;
@@ -74,14 +74,14 @@
 
 &omap3_pmx_core {
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT  | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
 			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
 			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
@@ -92,13 +92,13 @@
 		>;
 	};
 
-	green_led_pins: pinmux_green_led_pins {
+	green_led_pins: green-led-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4)	/* sys_clkout2.gpio_186 */
 		>;
 	};
 
-	dss_dpi_pins_common: pinmux_dss_dpi_pins_common {
+	dss_dpi_pins_common: dss-dpi-common-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
@@ -126,7 +126,7 @@
 		>;
 	};
 
-	dss_dpi_pins_cm_t35x: pinmux_dss_dpi_pins_cm_t35x {
+	dss_dpi_pins_cm_t35x: dss-dpi-cm-t35x-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
 			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
@@ -137,13 +137,13 @@
 		>;
 	};
 
-	ads7846_pins: pinmux_ads7846_pins {
+	ads7846_pins: ads7846-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20ba, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_ncs6.gpio_57 */
 		>;
 	};
 
-	mcspi1_pins: pinmux_mcspi1_pins {
+	mcspi1_pins: mcspi1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk */
 			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo */
@@ -152,14 +152,14 @@
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
 			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
-	mcbsp2_pins: pinmux_mcbsp2_pins {
+	mcbsp2_pins: mcbsp2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx */
 			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx */
@@ -190,7 +190,7 @@
 
 	clock-frequency = <400000>;
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
@@ -227,7 +227,7 @@
 
 		interrupt-parent = <&gpio2>;
 		interrupts = <25 0>;		/* gpio_57 */
-		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/ti/omap/omap3-cm-t3x30.dtsi
index 5e8943539fcc..0e942513560d 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-cm-t3x30.dtsi
@@ -22,14 +22,14 @@
 
 &omap3_pmx_core {
 
-	smsc1_pins: pinmux_smsc1_pins {
+	smsc1_pins: smsc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0)	/* gpmc_ncs5.gpmc_ncs5 */
 			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4)	/* uart3_cts_rctx.gpio_163 */
 		>;
 	};
 
- 	hsusb0_pins: pinmux_hsusb0_pins {
+ 	hsusb0_pins: hsusb0-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_clk.hsusb0_clk */
 			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_stp.hsusb0_stp */
diff --git a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi b/arch/arm/boot/dts/ti/omap/omap3-cpu-thermal.dtsi
index 0da759f8e2c2..7dd2340bc5e4 100644
--- a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-cpu-thermal.dtsi
@@ -12,8 +12,7 @@ cpu_thermal: cpu-thermal {
 	polling-delay = <1000>; /* milliseconds */
 	coefficients = <0 20000>;
 
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     0>;
+	thermal-sensors = <&bandgap>;
 
 	cpu_trips: trips {
 		cpu_alert0: cpu_alert {
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi
index 54cd37336be7..910e3b54f530 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi
@@ -15,28 +15,28 @@
 	leds {
 		compatible = "gpio-leds";
 
-		heartbeat {
+		led-heartbeat {
 			label = "devkit8000::led1";
 			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;	/* 186 -> LED1 */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		mmc {
+		led-mmc {
 			label = "devkit8000::led2";
 			gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;	/* 163 -> LED2 */
 			default-state = "on";
 			linux,default-trigger = "none";
 		};
 
-		usr {
+		led-usr {
 			label = "devkit8000::led3";
 			gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* 164 -> LED3 */
 			default-state = "on";
 			linux,default-trigger = "usr";
 		};
 
-		pmu_stat {
+		led-pmu-stat {
 			label = "devkit8000::pmu_stat";
 			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
 		};
@@ -275,8 +275,8 @@
 
 	ethernet@6,0 {
 		compatible = "davicom,dm9000";
-		reg =  <6 0x000 2
-			6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
+		reg = <6 0x000 2>,
+		      <6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
 		bank-width = <2>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
@@ -312,7 +312,7 @@
 };
 
 &omap3_pmx_core {
-	dss_dpi_pins: pinmux_dss_dpi_pins {
+	dss_dpi_pins: dss-dpi-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi
index 3decc2d78a6c..78c657429f64 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi
@@ -54,7 +54,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <27 0>;		/* gpio_27 */
-		pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
@@ -65,7 +65,7 @@
 		ti,debounce-max = /bits/ 16 <10>;
 		ti,debounce-tol = /bits/ 16 <5>;
 		ti,debounce-rep = /bits/ 16 <1>;
-		ti,keep-vref-on = <1>;
+		ti,keep-vref-on;
 		ti,settle-delay-usec = /bits/ 16 <150>;
 
 		wakeup-source;
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd43.dts
index afed85078ad8..afed85078ad8 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd43.dts
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd70.dts
index 07c51a105c0d..07c51a105c0d 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd70.dts
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/ti/omap/omap3-devkit8000.dts
index 162d0726b008..162d0726b008 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-devkit8000.dts
diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/ti/omap/omap3-echo.dts
index 8f02ff5e7da6..96011c976f5b 100644
--- a/arch/arm/boot/dts/omap3-echo.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-echo.dts
@@ -146,7 +146,7 @@
 		label = "q1";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-		enable-gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
+		enable-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
 
 		multi-led@0 {
 			#address-cells = <1>;
@@ -521,16 +521,16 @@
 };
 
 
-#include "tps65910.dtsi"
+#include "../../tps65910.dtsi"
 
 &omap3_pmx_core {
-	tps_pins: pinmux_tps_pins {
+	tps_pins: tps-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_INPUT_PULLUP | PIN_OFF_OUTPUT_LOW | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
 		>;
 	};
 
-	button_pins: pinmux_button_pins {
+	button_pins: button-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20dc, PIN_INPUT | MUX_MODE4)	/* dss_data0.gpio_70 */
 			OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4)	/* dss_data2.gpio_72 */
@@ -540,7 +540,7 @@
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
 			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
@@ -551,7 +551,7 @@
 		>;
 	};
 
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
 			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
@@ -566,7 +566,7 @@
 		>;
 	};
 
-	mcbsp2_pins: pinmux_mcbsp2_pins {
+	mcbsp2_pins: mcbsp2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
 			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
@@ -577,7 +577,7 @@
 };
 
 &omap3_pmx_core2 {
-	mmc3_pins: pinmux_mmc3_pins {
+	mmc3_pins: mmc3-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
 			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_ctl.sdmmc3_cmd */
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/ti/omap/omap3-evm-37xx.dts
index abd403c228c7..9c60ac853a40 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-evm-37xx.dts
@@ -17,7 +17,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&hsusb2_2_pins>;
 
-	ehci_phy_pins: pinmux_ehci_phy_pins {
+	ehci_phy_pins: ehci-phy-pins {
 		pinctrl-single,pins = <
 
 		/* EHCI PHY reset GPIO etk_d7.gpio_21 */
@@ -29,7 +29,7 @@
 	};
 
 	/* Used by OHCI and EHCI. OHCI won't work without external phy */
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+	hsusb2_2_pins: hsusb2-2-pins {
 		pinctrl-single,pins = <
 
 		/* etk_d10.hsusb2_clk */
@@ -60,7 +60,6 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name = "hynix,h8kds0un0mer-4em";
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-evm-common.dtsi
index 17c89df6ce6b..1b6023c4cdf3 100644
--- a/arch/arm/boot/dts/omap3-evm-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-evm-common.dtsi
@@ -25,7 +25,7 @@
 	};
 
 	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
+	hsusb2_phy: hsusb2-phy-pins {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
 		vcc-supply = <&hsusb2_power>;
diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-evm-processor-common.dtsi
index e6ba30a21166..70e33cdd519a 100644
--- a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-evm-processor-common.dtsi
@@ -33,7 +33,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>;
 
-	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
+	dss_dpi_pins1: dss-dpi2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
@@ -62,7 +62,7 @@
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
 			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
@@ -78,7 +78,7 @@
 	};
 
 	/* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
 			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
@@ -93,7 +93,7 @@
 		>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
 			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
@@ -101,14 +101,14 @@
 	};
 
 	/* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */
-	on_board_gpio_61: pinmux_ehci_port_select_pins {
+	on_board_gpio_61: ehci-port-select-pins {
 		pinctrl-single,pins = <
 		OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4)
 		>;
 	};
 
 	/* Used by OHCI and EHCI. OHCI won't work without external phy */
-	hsusb2_pins: pinmux_hsusb2_pins {
+	hsusb2_pins: hsusb2-pins {
 		pinctrl-single,pins = <
 
 		/* mcspi1_cs3.hsusb2_data2 */
@@ -135,14 +135,14 @@
 	 * Note that gpio_150 pulled high with internal pull to prevent wlcore
 	 * reset on return from off mode in idle.
 	 */
-	wl12xx_gpio: pinmux_wl12xx_gpio {
+	wl12xx_gpio: wl12xx-gpio-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE7)		/* uart1_cts.gpio_150 */
 			OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
 		>;
 	};
 
-	smsc911x_pins: pinmux_smsc911x_pins {
+	smsc911x_pins: smsc911x-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
 		>;
@@ -150,7 +150,7 @@
 };
 
 &omap3_pmx_wkup {
-	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
+	dss_dpi_pins2: dss-dpi1-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
 			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
@@ -205,7 +205,7 @@
 
 /* T2_GPIO_2 low to route GPIO_61 to on-board devices */
 &twl_gpio {
-	en_on_board_gpio_61 {
+	en-on-board-gpio-61-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/ti/omap/omap3-evm.dts
index f95eea63b355..28caa5d93b87 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-evm.dts
@@ -17,7 +17,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&hsusb2_2_pins>;
 
-	ehci_phy_pins: pinmux_ehci_phy_pins {
+	ehci_phy_pins: ehci-phy-pins {
 		pinctrl-single,pins = <
 
 		/* EHCI PHY reset GPIO etk_d7.gpio_21 */
@@ -29,7 +29,7 @@
 	};
 
 	/* Used by OHCI and EHCI. OHCI won't work without external phy */
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+	hsusb2_2_pins: hsusb2-2-pins {
 		pinctrl-single,pins = <
 
 		/* etk_d10.hsusb2_clk */
@@ -60,7 +60,6 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name = "micron,mt29f2g16abdhc";
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi
index 28a6a9345be5..1b18ed8c1f7a 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi
@@ -11,8 +11,7 @@
 
 / {
 	model = "OMAP3 GTA04";
-	compatible = "ti,omap3-gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3";
-
+	compatible = "goldelico,gta04", "ti,omap3630", "ti,omap3";
 	cpus {
 		cpu@0 {
 			cpu0-supply = <&vcc>;
@@ -147,14 +146,14 @@
 		pinctrl-0 = <&backlight_pins>;
 	};
 
-	pwm11: dmtimer-pwm {
+	pwm11: pwm-11 {
 		compatible = "ti,omap-dmtimer-pwm";
 		ti,timers = <&timer11>;
 		#pwm-cells = <3>;
 		ti,clock-source = <0x01>;
 	};
 
-	hsusb2_phy: hsusb2_phy {
+	hsusb2_phy: hsusb2-phy-pins {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 		#phy-cells = <0>;
@@ -201,7 +200,7 @@
 	};
 
 	/* devconf0 setup for mcbsp1 clock pins */
-	pinmux_mcbsp1@48002274 {
+	pinmux@48002274 {
 		compatible = "pinctrl-single";
 		reg = <0x48002274 4>;   /* CONTROL_DEVCONF0 */
 		#address-cells = <1>;
@@ -212,14 +211,14 @@
 		#pinctrl-cells = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&mcbsp1_devconf0_pins>;
-		mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins {
+		mcbsp1_devconf0_pins: mcbsp1-devconf0-pins {
 			/*                   offset bits mask */
 			pinctrl-single,bits = <0x00 0x08 0x1c>;	/* set MCBSP1_CLKR */
 		};
 	};
 
 	/* devconf1 setup for tvout pins */
-	pinmux_tv_out@480022d8 {
+	pinmux@480022d8 {
 		compatible = "pinctrl-single";
 		reg = <0x480022d8 4>;	/* CONTROL_DEVCONF1 */
 		#address-cells = <1>;
@@ -230,7 +229,7 @@
 		#pinctrl-cells = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tv_acbias_devconf1_pins>;
-		tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins {
+		tv_acbias_devconf1_pins: tv-acbias-devconf1-pins {
 			/*			offset	bits	mask */
 			pinctrl-single,bits = <0x00 0x40800 0x40800>;	/* set TVOUTBYPASS and TVOUTACEN */
 		};
@@ -238,7 +237,7 @@
 };
 
 &omap3_pmx_wkup {
-	gpio1_pins: pinmux_gpio1_pins {
+	gpio1_pins: gpio1-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
 			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_clkout.gpio_10 */
@@ -252,7 +251,7 @@
 			&hsusb2_pins
 	>;
 
-	hsusb2_pins: pinmux_hsusb2_pins {
+	hsusb2_pins: hsusb2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
 			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
@@ -263,28 +262,28 @@
 		>;
 	};
 
-	uart1_pins: pinmux_uart1_pins {
+	uart1_pins: uart1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)		/* uart1_rx.uart1_rx */
 			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
 		>;
 	};
 
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
 			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
 		>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
 			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx.uart3_tx */
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
 			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
@@ -295,13 +294,13 @@
 		>;
 	};
 
-	backlight_pins: backlight_pins_pinmux {
+	backlight_pins: backlight-pinmux-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3)		/* gpt11/gpio57 */
 		>;
 	};
 
-	dss_dpi_pins: pinmux_dss_dpi_pins {
+	dss_dpi_pins: dss-dpi-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
@@ -332,52 +331,52 @@
 			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
 			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
 		>;
-       };
+	};
 
-	gps_pins: pinmux_gps_pins {
+	gps_pins: gps-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */
 		>;
 	};
 
-	hdq_pins: hdq_pins {
+	hdq_pins: hdq-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
 		>;
 	};
 
-	bmp085_pins: pinmux_bmp085_pins {
+	bmp085_pins: bmp085-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */
 		>;
 	};
 
-	bma180_pins: pinmux_bma180_pins {
+	bma180_pins: bma180-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
 		>;
 	};
 
-	itg3200_pins: pinmux_itg3200_pins {
+	itg3200_pins: itg3200-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */
 		>;
 	};
 
-	hmc5843_pins: pinmux_hmc5843_pins {
+	hmc5843_pins: hmc5843-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
 		>;
 	};
 
-	penirq_pins: pinmux_penirq_pins {
+	penirq_pins: penirq-pins {
 		pinctrl-single,pins = <
 			/* here we could enable to wakeup the cpu from suspend by a pen touch */
 			OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
 		>;
 	};
 
-	camera_pins: pinmux_camera_pins {
+	camera_pins: camera-pins {
 		pinctrl-single,pins = <
 			/* set up parallel camera interface */
 			OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */
@@ -403,7 +402,7 @@
 		>;
 	};
 
-	mcbsp1_pins: pinmux_mcbsp1_pins {
+	mcbsp1_pins: mcbsp1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */
 			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_clkr.mcbsp1_fsr */
@@ -416,7 +415,7 @@
 		>;
 	};
 
-	mcbsp2_pins: pinmux_mcbsp2_pins {
+	mcbsp2_pins: mcbsp2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
 			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_clkx */
@@ -425,7 +424,7 @@
 		>;
 	};
 
-	mcbsp3_pins: pinmux_mcbsp3_pins {
+	mcbsp3_pins: mcbsp3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0)	/* mcbsp3_dx.mcbsp3_dx */
 			OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0)	/* mcbsp3_dx.mcbsp3_dr */
@@ -434,7 +433,7 @@
 		>;
 	};
 
-	mcbsp4_pins: pinmux_mcbsp4_pins {
+	mcbsp4_pins: mcbsp4-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcbsp4_clkx.mcbsp4_clkx */
 			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcbsp4_clkx.mcbsp4_dr */
@@ -447,9 +446,10 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <
 			&hsusb2_2_pins
+			&mcspi3hog_pins
 	>;
 
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+	hsusb2_2_pins: hsusb2-2-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
 			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
@@ -460,7 +460,16 @@
 		>;
 	};
 
-	spi_gpio_pins: spi_gpio_pinmux {
+	mcspi3hog_pins: mcspi3hog-pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d0 */
+			OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d1 */
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d2 */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d3 */
+		>;
+	};
+
+	spi_gpio_pins: spi-gpio-pinmux-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
 			OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */
@@ -592,8 +601,10 @@
 		interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
 		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;	/* GPIO_160 */
 		ti,x-plate-ohms = <600>;
-		touchscreen-size-x = <480>;
-		touchscreen-size-y = <640>;
+		touchscreen-size-x = <0xf00>;
+		touchscreen-size-y = <0xf00>;
+		touchscreen-min-x = <0x100>;
+		touchscreen-min-y = <0x100>;
 		touchscreen-max-pressure = <1000>;
 		touchscreen-fuzz-x = <3>;
 		touchscreen-fuzz-y = <8>;
@@ -602,7 +613,7 @@
 	};
 
 	/* RFID EEPROM */
-	m24lr64@50 {
+	eeprom@50 {
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 	};
@@ -612,6 +623,22 @@
 	clock-frequency = <100000>;
 };
 
+&mcspi1 {
+	status = "disabled";
+};
+
+&mcspi2 {
+	status = "disabled";
+};
+
+&mcspi3 {
+	status = "disabled";
+};
+
+&mcspi4 {
+	status = "disabled";
+};
+
 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
@@ -853,8 +880,8 @@
 };
 
 &hdqw1w {
-        pinctrl-names = "default";
-        pinctrl-0 = <&hdq_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdq_pins>;
 };
 
 /* image signal processor within OMAP3 SoC */
diff --git a/arch/arm/boot/dts/omap3-gta04a3.dts b/arch/arm/boot/dts/ti/omap/omap3-gta04a3.dts
index bfae1a9ceeac..bfae1a9ceeac 100644
--- a/arch/arm/boot/dts/omap3-gta04a3.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-gta04a3.dts
diff --git a/arch/arm/boot/dts/omap3-gta04a4.dts b/arch/arm/boot/dts/ti/omap/omap3-gta04a4.dts
index f1cf24d55e6f..f1cf24d55e6f 100644
--- a/arch/arm/boot/dts/omap3-gta04a4.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-gta04a4.dts
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/ti/omap/omap3-gta04a5.dts
index 0b5bd7388877..d3a81f0b880f 100644
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-gta04a5.dts
@@ -45,36 +45,41 @@
 };
 
 &omap3_pmx_core {
-	bt_pins: pinmux_bt_pins {
+	bt_pins: bt-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* mmc2_dat5 = mmc3_dat1 = gpio137 */
 		>;
 	};
 
-	wlan_pins: pinmux_wlan_pins {
+	wlan_pins: wlan-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* mmc2_dat6 = mmc3_dat2 = gpio138 */
 		>;
 	};
 
-	wlan_irq_pin: pinmux_wlan_irq_pin {
+	wlan_irq_pin: wlan-irq-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4)	/* mmc2_dat7 = mmc3_dat3 = gpio139 */
 		>;
 	};
 
-	irda_pins: pinmux_irda {
+	irda_pins: irda-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* mcspi1_cs1 = gpio175 */
 		>;
 	};
 
-	pps_pins: pinmux_pps_pins {
+	pps_pins: pps-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
 		>;
 	};
 
+	bno050_pins: pinmux-bno050-pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT | MUX_MODE4) /* gpin113 */
+		>;
+	};
 };
 
 /*
@@ -109,23 +114,33 @@
 	};
 };
 
+&uart1 {
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins>;
+		enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;	/* GPIO_137 */
+	};
+};
+
+
 &i2c2 {
 	/delete-node/ bmp085@77;
 	/delete-node/ bma180@41;
 	/delete-node/ itg3200@68;
 	/delete-node/ hmc5843@1e;
 
-	bmg160@69 {
+	gyrometer@69 {
 		compatible = "bosch,bmg160";
 		reg = <0x69>;
 	};
 
-	bmc150@10 {
+	accelerometer@10 {
 		compatible = "bosch,bmc150_accel";
 		reg = <0x10>;
 	};
 
-	bmc150@12 {
+	magnetometer@12 {
 		compatible = "bosch,bmc150_magn";
 		reg = <0x12>;
 	};
@@ -136,4 +151,12 @@
 		vdda-supply = <&vio>;
 		vddd-supply = <&vio>;
 	};
+
+	imu@29 {
+		compatible = "bosch,bno055";
+		reg = <0x29>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bno050_pins>;
+		/* interrupt at &gpio4 17 */
+	};
 };
diff --git a/arch/arm/boot/dts/omap3-gta04a5one.dts b/arch/arm/boot/dts/ti/omap/omap3-gta04a5one.dts
index 9db9fe67cd63..1e5703d1b02e 100644
--- a/arch/arm/boot/dts/omap3-gta04a5one.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-gta04a5one.dts
@@ -5,10 +5,12 @@
 
 #include "omap3-gta04a5.dts"
 
-&omap3_pmx_core {
+/ {
 	model = "Goldelico GTA04A5/Letux 2804 with OneNAND";
+};
 
-	gpmc_pins: pinmux_gpmc_pins {
+&omap3_pmx_core {
+	gpmc_pins: gpmc-pins {
 		pinctrl-single,pins = <
 
 			/* address lines */
diff --git a/arch/arm/boot/dts/omap3-ha-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-ha-common.dtsi
index a010585d0302..3a258a692757 100644
--- a/arch/arm/boot/dts/omap3-ha-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-ha-common.dtsi
@@ -17,43 +17,43 @@
 };
 
 &omap3_pmx_core {
-	sound2_pins: pinmux_sound2_pins {
+	sound2_pins: sound2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x209e, PIN_OUTPUT | MUX_MODE4)	/* gpmc_d8 gpio_44 */
 		>;
 	};
 
-	led_blue_pins: pinmux_led_blue_pins {
+	led_blue_pins: led-blue-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE4)	/* cam_xclka gpio_96, LED blue */
 		>;
 	};
 
-	led_green_pins: pinmux_led_green_pins {
+	led_green_pins: led-green-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2126, PIN_OUTPUT | MUX_MODE4)	/* cam_d8 gpio_107, LED green */
 		>;
 	};
 
-	led_red_pins: pinmux_led_red_pins {
+	led_red_pins: led-red-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* cam_xclkb gpio_111, LED red */
 		>;
 	};
 
-	poweroff_pins: pinmux_poweroff_pins {
+	poweroff_pins: poweroff-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* i2c2_scl gpio_168 */
 		>;
 	};
 
-	powerdown_input_pins: pinmux_powerdown_input_pins {
+	powerdown_input_pins: powerdown-input-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE4)	/* i2c2_sda gpio_183 */
 		>;
 	};
 
-	fpga_boot0_pins: fpga_boot0_pins {
+	fpga_boot0_pins: fpga-boot0-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)	/* cam_d2 gpio_101 */
 			OMAP3_CORE1_IOPAD(0x211c, PIN_OUTPUT | MUX_MODE4)	/* cam_d3 gpio_102 */
@@ -62,7 +62,7 @@
 		>;
 	};
 
-	fpga_boot1_pins: fpga_boot1_pins {
+	fpga_boot1_pins: fpga-boot1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE4)	/* gpmc_d10 gpio_46 */
 			OMAP3_CORE1_IOPAD(0x20a4, PIN_OUTPUT | MUX_MODE4)	/* gpmc_d11 gpio_47 */
diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/ti/omap/omap3-ha-lcd.dts
index 643283f0c3db..94f6b7931e33 100644
--- a/arch/arm/boot/dts/omap3-ha-lcd.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-ha-lcd.dts
@@ -24,19 +24,19 @@
 		&touchscreen_wake_pins
 	>;
 
-	touchscreen_irq_pins: pinmux_touchscreen_irq_pins {
+	touchscreen_irq_pins: touchscreen-irq-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpio_136, Touchscreen IRQ */
 		>;
 	};
 
-	touchscreen_wake_pins: pinmux_touchscreen_wake_pins {
+	touchscreen_wake_pins: touchscreen-wake-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x212c, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* gpio_110, Touchscreen Wake */
 		>;
 	};
 
-	dss_dpi_pins: pinmux_dss_dpi_pins {
+	dss_dpi_pins: dss-dpi-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
@@ -69,13 +69,13 @@
 		>;
 	};
 
-	lte430_pins: pinmux_lte430_pins {
+	lte430_pins: lte430-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 */
 		>;
 	};
 
-	backlight_pins: pinmux_backlight_pins {
+	backlight_pins: backlight-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 */
 		>;
diff --git a/arch/arm/boot/dts/omap3-ha.dts b/arch/arm/boot/dts/ti/omap/omap3-ha.dts
index 19e471eb3b4e..19e471eb3b4e 100644
--- a/arch/arm/boot/dts/omap3-ha.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-ha.dts
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/ti/omap/omap3-igep.dtsi
index 219202610463..7346cad84eda 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-igep.dtsi
@@ -34,28 +34,28 @@
 };
 
 &omap3_pmx_core {
-	gpmc_pins: pinmux_gpmc_pins {
+	gpmc_pins: gpmc-pins {
 		pinctrl-single,pins = <
 			/* OneNAND seems to require PIN_INPUT on clock. */
                         OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
 		>;
 	};
 
-	uart1_pins: pinmux_uart1_pins {
+	uart1_pins: uart1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)	/* uart1_rx.uart1_rx */
 			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)	/* uart1_tx.uart1_tx */
 		>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx.uart3_rx */
 			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx.uart3_tx */
 		>;
 	};
 
-	mcbsp2_pins: pinmux_mcbsp2_pins {
+	mcbsp2_pins: mcbsp2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
 			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
@@ -64,7 +64,7 @@
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
 			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
@@ -75,7 +75,7 @@
 		>;
 	};
 
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
 			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
@@ -86,14 +86,14 @@
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)	/* i2c1_scl.i2c1_scl */
 			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)	/* i2c1_sda.i2c1_sda */
 		>;
 	};
 
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
 			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
@@ -111,7 +111,6 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name = "micron,mt29c4g96maz";
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-igep0020-common.dtsi
index 73d8f471b9ec..13f434625407 100644
--- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-igep0020-common.dtsi
@@ -107,13 +107,13 @@
 		&dss_dpi_pins
 	>;
 
-	tfp410_pins: pinmux_tfp410_pins {
+	tfp410_pins: tfp410-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
 		>;
 	};
 
-	dss_dpi_pins: pinmux_dss_dpi_pins {
+	dss_dpi_pins: dss-dpi-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
@@ -146,7 +146,7 @@
 		>;
 	};
 
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
 			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
@@ -155,7 +155,7 @@
 		>;
 	};
 
-	smsc9221_pins: pinmux_smsc9221_pins {
+	smsc9221_pins: smsc9221-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)	/* mcspi1_cs2.gpio_176 */
 		>;
@@ -168,7 +168,7 @@
 		&hsusbb1_pins
 	>;
 
-	hsusbb1_pins: pinmux_hsusbb1_pins {
+	hsusbb1_pins: hsusbb1-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)		/* etk_ctl.hsusb1_clk */
 			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)		/* etk_clk.hsusb1_stp */
@@ -185,7 +185,7 @@
 		>;
 	};
 
-	leds_pins: pinmux_leds_pins {
+	leds_pins: leds-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
 			OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
@@ -193,7 +193,7 @@
 		>;
 	};
 
-	mmc1_wp_pins: pinmux_mmc1_cd_pins {
+	mmc1_wp_pins: mmc1-cd-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4)   /* etk_d15.gpio_29 */
 		>;
diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/ti/omap/omap3-igep0020-rev-f.dts
index 9dca5bfc87ab..316e8e6b39cd 100644
--- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-igep0020-rev-f.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap3";
 
 	/* Regulator to trigger the WL_EN signal of the Wifi module */
 	lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
@@ -24,7 +24,7 @@
 };
 
 &omap3_pmx_core {
-	lbep5clwmc_pins: pinmux_lbep5clwmc_pins {
+	lbep5clwmc_pins: lbep5clwmc-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT | MUX_MODE4)	/* mcspi1_cs3.gpio_177 - W_IRQ */
 			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - BT_EN */
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/ti/omap/omap3-igep0020.dts
index c6f863bc03ad..232cf9187822 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-igep0020.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap3";
 
 	vmmcsdio_fixed: fixedregulator-mmcsdio {
 		compatible = "regulator-fixed";
@@ -27,7 +27,7 @@
 };
 
 &omap3_pmx_core {
-	lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
+	lbee1usjyc_pins: lbee1usjyc-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - RESET_N_W */
 			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 - WIFI_PDN */
diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-igep0030-common.dtsi
index 742e3e147063..d434f75aadac 100644
--- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-igep0030-common.dtsi
@@ -31,7 +31,7 @@
 		};
 	};
 
-	hsusb2_phy: hsusb2_phy {
+	hsusb2_phy: hsusb2-phy-pins {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;		/* gpio_54 */
 		#phy-cells = <0>;
@@ -42,7 +42,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&hsusb2_pins>;
 
-	hsusb2_pins: pinmux_hsusb2_pins {
+	hsusb2_pins: hsusb2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
 			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
@@ -53,7 +53,7 @@
 		>;
 	};
 
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1)	/* mcbsp3_dx.uart2_cts */
 			OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_dr.uart2_rts */
@@ -67,7 +67,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&hsusb2_core2_pins>;
 
-	hsusb2_core2_pins: pinmux_hsusb2_core2_pins {
+	hsusb2_core2_pins: hsusb2-core2-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		      /* etk_d10.hsusb2_clk */
 			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		      /* etk_d11.hsusb2_stp */
@@ -78,7 +78,7 @@
 		>;
 	};
 
-	leds_core2_pins: pinmux_leds_core2_pins {
+	leds_core2_pins: leds-core2-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)	/* etk_d2.gpio_16 */
 		>;
diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/ti/omap/omap3-igep0030-rev-g.dts
index 8e9c12cf51a7..fddd7c86fec4 100644
--- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-igep0030-rev-g.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap3";
 
 	/* Regulator to trigger the WL_EN signal of the Wifi module */
 	lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
@@ -24,7 +24,7 @@
 };
 
 &omap3_pmx_core {
-	lbep5clwmc_pins: pinmux_lbep5clwmc_pins {
+	lbep5clwmc_pins: lbep5clwmc-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)	/* sdmmc2_dat4.gpio_136 - W_IRQ */
 			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - BT_EN */
@@ -32,7 +32,7 @@
 		>;
 	};
 
-	leds_pins: pinmux_leds_pins {
+	leds_pins: leds-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4)	/* i2c2_scl.gpio_168 */
 		>;
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/ti/omap/omap3-igep0030.dts
index 5188f96f431e..e3f99dbef2a1 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-igep0030.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap3";
 
 	vmmcsdio_fixed: fixedregulator-mmcsdio {
 		compatible = "regulator-fixed";
@@ -27,7 +27,7 @@
 };
 
 &omap3_pmx_core {
-	lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
+	lbee1usjyc_pins: lbee1usjyc-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - RESET_N_W */
 			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 - WIFI_PDN */
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/ti/omap/omap3-ldp.dts
index 36fc8805e0c1..cf325f56b464 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-ldp.dts
@@ -103,7 +103,6 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name = "micron,nand";
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
@@ -223,7 +222,7 @@
 };
 
 &omap3_pmx_core {
-	gpio_key_pins: pinmux_gpio_key_pins {
+	gpio_key_pins: gpio-key-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)	/* cam_d2.gpio_101 */
 			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4)	/* cam_d3.gpio_102 */
@@ -237,7 +236,7 @@
 		>;
 	};
 
-	musb_pins: pinmux_musb_pins {
+	musb_pins: musb-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
 			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
@@ -254,7 +253,7 @@
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
 			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
@@ -301,5 +300,5 @@
 
 &vaux1 {
 	/* Needed for ads7846 */
-        regulator-name = "vcc";
+	regulator-name = "vcc";
 };
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/ti/omap/omap3-lilly-a83x.dtsi
index c595afe4181d..565a6c0e7b37 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-lilly-a83x.dtsi
@@ -54,19 +54,19 @@
 &omap3_pmx_wkup {
 	pinctrl-names = "default";
 
-	lan9221_pins: pinmux_lan9221_pins {
+	lan9221_pins: lan9221-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)   /* reserved.gpio_129 */
 		>;
 	};
 
-	tsc2048_pins: pinmux_tsc2048_pins {
+	tsc2048_pins: tsc2048-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4)   /* sys_boot6.gpio_8 */
 		>;
 	};
 
-	mmc1cd_pins: pinmux_mmc1cd_pins {
+	mmc1cd_pins: mmc1cd-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4)   /* reserved.gpio_126 */
 		>;
@@ -76,7 +76,7 @@
 &omap3_pmx_core {
 	pinctrl-names = "default";
 
-	uart1_pins: pinmux_uart1_pins {
+	uart1_pins: uart1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)   /* uart1_tx.uart1_tx */
 			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)   /* uart1_rts.uart1_rts */
@@ -85,42 +85,42 @@
 		>;
 	};
 
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)   /* mcbsp3_clkx.uart2_tx */
 			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)    /* mcbsp3_fsx.uart2_rx */
 		>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)    /* uart3_rx_irrx.uart3_rx_irrx */
 			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)   /* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_scl.i2c1_scl */
 			OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_sda.i2c1_sda */
 		>;
 	};
 
-	i2c2_pins: pinmux_i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)   /* i2c2_scl.i2c2_scl */
 			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)   /* i2c2_sda.i2c2_sda */
 		>;
 	};
 
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
 			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
 		>;
 	};
 
-	hsusb1_pins: pinmux_hsusb1_pins {
+	hsusb1_pins: hsusb1-pins {
 		pinctrl-single,pins = <
 
 			/* GPIO 182 controls USB-Hub reset. But USB-Phy its
@@ -132,7 +132,7 @@
 		>;
 	};
 
-	hsusb_otg_pins: pinmux_hsusb_otg_pins {
+	hsusb_otg_pins: hsusb-otg-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)   /* hsusb0_clk.hsusb0_clk */
 			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)  /* hsusb0_stp.hsusb0_stp */
@@ -149,7 +149,7 @@
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_clk.sdmmc1_clk */
 			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_cmd.sdmmc1_cmd */
@@ -160,7 +160,7 @@
 		>;
 	};
 
-	spi2_pins: pinmux_spi2_pins {
+	spi2_pins: spi2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_clk.mcspi2_clk */
 			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_simo.mcspi2_simo */
@@ -173,7 +173,7 @@
 &omap3_pmx_core2 {
 	pinctrl-names = "default";
 
-	hsusb1_2_pins: pinmux_hsusb1_2_pins {
+	hsusb1_2_pins: hsusb1-2-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)  /* etk_clk.hsusb1_stp */
 			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3)   /* etk_ctl.hsusb1_clk */
@@ -190,7 +190,7 @@
 		>;
 	};
 
-	gpio1_pins: pinmux_gpio1_pins {
+	gpio1_pins: gpio1-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4)   /* etk_d15.gpio_29 */
 		>;
@@ -311,7 +311,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <8 0>;   /* boot6 / gpio_8 */
 		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&reg_vcc3>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tsc2048_pins>;
diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/ti/omap/omap3-lilly-dbb056.dts
index ecb4ef738e07..0891c6682a67 100644
--- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-lilly-dbb056.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "INCOstartec LILLY-DBB056 (DM3730)";
-	compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap3";
 };
 
 &twl {
@@ -24,25 +24,25 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&lcd_pins>;
 
-	lan9117_pins: pinmux_lan9117_pins {
+	lan9117_pins: lan9117-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4)   /* cam_fld.gpio_98 */
 		>;
 	};
 
-	gpio4_pins: pinmux_gpio4_pins {
+	gpio4_pins: gpio4-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4)   /* cam_xclkb.gpio_111 -> sja1000 IRQ */
 		>;
 	};
 
-	gpio5_pins: pinmux_gpio5_pins {
+	gpio5_pins: gpio5-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x218c, PIN_OUTPUT | PIN_OFF_OUTPUT_HIGH | MUX_MODE4)   /* mcbsp1_clk.gpio_156 -> enable DSS */
 		>;
 	};
 
-	lcd_pins: pinmux_lcd_pins {
+	lcd_pins: lcd-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
@@ -69,7 +69,7 @@
 		>;
 	};
 
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_clk.sdmmc2_clk */
 			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_cmd.sdmmc2_cmd */
@@ -86,7 +86,7 @@
 		>;
 	};
 
-	spi1_pins: pinmux_spi1_pins {
+	spi1_pins: spi1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)   /* mcspi1_clk.mcspi1_clk */
 			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)   /* mcspi1_simo.mcspi1_simo */
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/ti/omap/omap3-n9.dts
index d211bcc31174..a3cf3f443785 100644
--- a/arch/arm/boot/dts/omap3-n9.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-n9.dts
@@ -12,7 +12,7 @@
 
 / {
 	model = "Nokia N9";
-	compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap3";
 };
 
 &i2c2 {
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/ti/omap/omap3-n900.dts
index dd7971556449..c50ca572d1b9 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-n900.dts
@@ -9,6 +9,7 @@
 #include "omap34xx.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/video-interfaces.h>
 
 /*
  * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
@@ -49,7 +50,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		heartbeat {
+		led-heartbeat {
 			label = "debug::sleep";
 			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;  /* 162 */
 			linux,default-trigger = "default-on";
@@ -156,7 +157,7 @@
 		io-channel-names = "temp", "bsi", "vbat";
 	};
 
-	pwm9: dmtimer-pwm {
+	pwm9: pwm-9 {
 		compatible = "ti,omap-dmtimer-pwm";
 		#pwm-cells = <3>;
 		ti,timers = <&timer9>;
@@ -194,7 +195,7 @@
 
 			csi_isp: endpoint {
 				remote-endpoint = <&csi_cam1>;
-				bus-type = <3>; /* CCP2 */
+				bus-type = <MEDIA_BUS_TYPE_CCP2>;
 				clock-lanes = <1>;
 				data-lanes = <0>;
 				lane-polarity = <0 0>;
@@ -208,7 +209,7 @@
 &omap3_pmx_core {
 	pinctrl-names = "default";
 
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)		/* uart2_cts */
 			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts */
@@ -217,14 +218,14 @@
 		>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx */
 			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
 		>;
 	};
 
-	ethernet_pins: pinmux_ethernet_pins {
+	ethernet_pins: ethernet-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpmc_ncs3.gpio_54 */
 			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4)		/* dss_data16.gpio_86 */
@@ -232,61 +233,61 @@
 		>;
 	};
 
-	gpmc_pins: pinmux_gpmc_pins {
+	gpmc_pins: gpmc-pins {
 		pinctrl-single,pins = <
 
 			/* address lines */
-                        OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
-                        OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
-                        OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
+			OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
+			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
+			OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
 
 			/* data lines, gpmc_d0..d7 not muxable according to TRM */
-                        OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
-                        OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
-                        OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
-                        OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
-                        OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
-                        OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
-                        OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
-                        OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
+			OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
+			OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
+			OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
+			OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
+			OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
+			OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
+			OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
+			OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
 
 			/*
 			 * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
 			 * according to TRM. OneNAND seems to require PIN_INPUT on clock.
 			 */
-                        OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
-                        OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
-		>;
+			OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
+			OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
+			>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)		/* i2c1_scl */
 			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)		/* i2c1_sda */
 		>;
 	};
 
-	i2c2_pins: pinmux_i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)		/* i2c2_scl */
 			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)		/* i2c2_sda */
 		>;
 	};
 
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)		/* i2c3_scl */
 			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)		/* i2c3_sda */
 		>;
 	};
 
-	debug_leds: pinmux_debug_led_pins {
+	debug_leds: debug-led-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 */
 		>;
 	};
 
-	mcspi4_pins: pinmux_mcspi4_pins {
+	mcspi4_pins: mcspi4-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
 			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
@@ -295,7 +296,7 @@
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
 			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
@@ -306,7 +307,7 @@
 		>;
 	};
 
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
 			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
@@ -321,13 +322,13 @@
 		>;
 	};
 
-	acx565akm_pins: pinmux_acx565akm_pins {
+	acx565akm_pins: acx565akm-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
 		>;
 	};
 
-	dss_sdi_pins: pinmux_dss_sdi_pins {
+	dss_sdi_pins: dss-sdi-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
 			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
@@ -339,14 +340,14 @@
 		>;
 	};
 
-	wl1251_pins: pinmux_wl1251 {
+	wl1251_pins: wl1251-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4)		/* gpio 87 => wl1251 enable */
 			OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4)		/* gpio 42 => wl1251 irq */
 		>;
 	};
 
-	ssi_pins: pinmux_ssi {
+	ssi_pins: ssi-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1)	/* ssi1_rdy_tx */
 			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1)		/* ssi1_flag_tx */
@@ -359,7 +360,7 @@
 		>;
 	};
 
-	modem_pins: pinmux_modem {
+	modem_pins: modem-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4)		/* gpio 70 => cmt_apeslpx */
 			OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4)		/* gpio 72 => ape_rst_rq */
@@ -370,7 +371,7 @@
 		>;
 	};
 
-	camera_pins: pinmux_camera {
+	camera_pins: camera-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x210c, PIN_OUTPUT | MUX_MODE7)       /* cam_hs */
 			OMAP3_CORE1_IOPAD(0x210e, PIN_OUTPUT | MUX_MODE7)       /* cam_vs */
@@ -738,12 +739,12 @@
 
 	si4713: si4713@63 {
 		compatible = "silabs,si4713";
-                reg = <0x63>;
+		reg = <0x63>;
 
-                interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
-                reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
-                vio-supply = <&vio>;
-                vdd-supply = <&vaux1>;
+		interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
+		reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
+		vio-supply = <&vio>;
+		vdd-supply = <&vaux1>;
 	};
 
 	bq24150a: bq24150a@6b {
@@ -753,7 +754,7 @@
 		ti,current-limit = <100>;
 		ti,weak-battery-voltage = <3400>;
 		ti,battery-regulation-voltage = <4200>;
-		ti,charge-current = <650>;
+		ti,charge-current = <950>;
 		ti,termination-current = <100>;
 		ti,resistor-sense = <68>;
 
@@ -767,56 +768,20 @@
 
 	clock-frequency = <400000>;
 
-	lis302dl: lis3lv02d@1d {
-		compatible = "st,lis3lv02d";
+	accelerometer@1d {
+		compatible = "st,lis302dl";
 		reg = <0x1d>;
 
-		Vdd-supply = <&vaux1>;
-		Vdd_IO-supply = <&vio>;
+		vdd-supply = <&vaux1>;
+		vddio-supply = <&vio>;
 
 		interrupt-parent = <&gpio6>;
-		interrupts = <21 20>; /* 181 and 180 */
-
-		/* click flags */
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-
-		/* Limits are 0.5g * value */
-		st,click-threshold-x = <8>;
-		st,click-threshold-y = <8>;
-		st,click-threshold-z = <10>;
-
-		/* Click must be longer than time limit */
-		st,click-time-limit = <9>;
-
-		/* Kind of debounce filter */
-		st,click-latency = <50>;
-
-		/* Interrupt line 2 for click detection */
-		st,irq2-click;
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>,
+			     <20 IRQ_TYPE_EDGE_RISING>; /* 181 and 180 */
 
-		st,wakeup-x-hi;
-		st,wakeup-y-hi;
-		st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
-
-		st,wakeup2-z-hi;
-		st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */
-
-		st,hipass1-disable;
-		st,hipass2-disable;
-
-		st,axis-x = <1>;    /* LIS3_DEV_X */
-		st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
-		st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
-
-		st,min-limit-x = <(-32)>;
-		st,min-limit-y = <3>;
-		st,min-limit-z = <3>;
-
-		st,max-limit-x = <(-3)>;
-		st,max-limit-y = <32>;
-		st,max-limit-z = <32>;
+		mount-matrix =	 "-1",  "0",  "0",
+				  "0",  "1",  "0",
+				  "0",  "0",  "-1";
 	};
 
 	cam1: camera@3e {
@@ -835,7 +800,7 @@
 
 		port {
 			csi_cam1: endpoint {
-				bus-type = <3>; /* CCP2 */
+				bus-type = <MEDIA_BUS_TYPE_CCP2>;
 				strobe = <1>;
 				clock-inv = <0>;
 				crc = <1>;
@@ -851,8 +816,6 @@
 		reg = <0x0c>;
 
 		VANA-supply = <&vaux4>;
-
-		#io-channel-cells = <0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/ti/omap/omap3-n950-n9.dtsi
index f68da828b050..aa4fcdbedd8f 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-n950-n9.dtsi
@@ -57,20 +57,20 @@
 };
 
 &omap3_pmx_core {
-	accelerator_pins: pinmux_accelerator_pins {
+	accelerator_pins: accelerator-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT | MUX_MODE4)	/* mcspi2_somi.gpio_180 -> LIS302 INT1 */
 			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT | MUX_MODE4)	/* mcspi2_cs0.gpio_181 -> LIS302 INT2 */
 		>;
 	};
 
-	debug_leds: pinmux_debug_led_pins {
+	debug_leds: debug-led-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE4)       /* dss_data22.gpio_92 */
 		>;
 	};
 
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
 			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
@@ -81,14 +81,14 @@
 		>;
 	};
 
-	wlan_pins: pinmux_wlan_pins {
+	wlan_pins: wlan-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */
 			OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */
 		>;
 	};
 
-	ssi_pins: pinmux_ssi_pins {
+	ssi_pins: ssi-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1)            /* ssi1_dat_tx */
 			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1)            /* ssi1_flag_tx */
@@ -101,7 +101,7 @@
 		>;
 	};
 
-	ssi_pins_idle: pinmux_ssi_pins_idle {
+	ssi_pins_idle: ssi-idle-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7)            /* ssi1_dat_tx */
 			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7)            /* ssi1_flag_tx */
@@ -114,7 +114,7 @@
 		>;
 	};
 
-	modem_pins1: pinmux_modem_core1_pins {
+	modem_pins1: modem-core1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4)	/* gpio_34 (ape_rst_rq) */
 			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4)            /* gpio_88 (cmt_rst_rq) */
@@ -122,7 +122,7 @@
 		>;
 	};
 
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)		/* uart2_cts */
 			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts */
@@ -133,7 +133,7 @@
 };
 
 &omap3_pmx_core2 {
-	modem_pins2: pinmux_modem_core2_pins {
+	modem_pins2: modem-core2-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)         /* gpio_23 (cmt_en) */
 		>;
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/ti/omap/omap3-n950.dts
index b2f480022ff6..b99f97880204 100644
--- a/arch/arm/boot/dts/omap3-n950.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-n950.dts
@@ -12,7 +12,7 @@
 
 / {
 	model = "Nokia N950";
-	compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap3";
 
 	keys {
 		compatible = "gpio-keys";
@@ -30,7 +30,7 @@
 };
 
 &omap3_pmx_core {
-	keypad_slide_pins: pinmux_debug_led_pins {
+	keypad_slide_pins: debug-led-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4)       /* cam_d10.gpio_109 */
 		>;
@@ -38,7 +38,7 @@
 };
 
 &omap3_pmx_core {
-	spi4_pins: pinmux_spi4_pins {
+	spi4_pins: spi4-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
 			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
@@ -49,7 +49,7 @@
 };
 
 &omap3_pmx_core {
-	dsi_pins: pinmux_dsi_pins {
+	dsi_pins: dsi-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE1) /* dsi_dx0 - data0+ */
 			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE1) /* dsi_dy0 - data0- */
@@ -60,7 +60,7 @@
 		>;
 	};
 
-	display_pins: pinmux_display_pins {
+	display_pins: display-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20ca, PIN_INPUT | MUX_MODE4) /* gpio 62 - display te */
 			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 - display reset */
diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-alto35-common.dtsi
index bb932913c9e3..7f1671bf3dfa 100644
--- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-alto35-common.dtsi
@@ -17,19 +17,19 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		gpio148 {
+		led-gpio148 {
 			label = "overo:red:gpio148";
 			gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>;		/* gpio 148 */
 		};
-		gpio150 {
+		led-gpio150 {
 			label = "overo:yellow:gpio150";
 			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;		/* gpio 150 */
 		};
-		gpio151 {
+		led-gpio151 {
 			label = "overo:blue:gpio151";
 			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;		/* gpio 151 */
 		};
-		gpio170 {
+		led-gpio170 {
 			label = "overo:green:gpio170";
 			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;		/* gpio 170 */
 		};
@@ -51,7 +51,7 @@
 };
 
 &omap3_pmx_core {
-	led_pins: pinmux_led_pins {
+	led_pins: led-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE4)	/* uart1_tx.gpio_148 */
 			OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4)	/* uart1_cts.gpio_150 */
@@ -62,7 +62,7 @@
 };
 
 &omap3_pmx_wkup {
-	button_pins: pinmux_button_pins {
+	button_pins: button-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a18, PIN_INPUT | MUX_MODE4)		/* sys_clkout1.gpio_10 */
 		>;
diff --git a/arch/arm/boot/dts/omap3-overo-alto35.dts b/arch/arm/boot/dts/ti/omap/omap3-overo-alto35.dts
index 37c64dd5f672..37c64dd5f672 100644
--- a/arch/arm/boot/dts/omap3-overo-alto35.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-alto35.dts
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-base.dtsi
index adc714c39825..2793821b2c33 100644
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-base.dtsi
@@ -44,7 +44,7 @@
 	};
 
 	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
+	hsusb2_phy: hsusb2-phy-pins {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;	/* gpio_183 */
 		vcc-supply = <&hsusb2_power>;
@@ -80,7 +80,7 @@
 			&hsusb2_pins
 	>;
 
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1)	/* mcbsp3_dx.uart2_cts */
 			OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_dr.uart2_rts */
@@ -89,14 +89,14 @@
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)		/* i2c1_scl.i2c1_scl */
 			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)		/* i2c1_sda.i2c1_sda */
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
 			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
@@ -107,7 +107,7 @@
 		>;
 	};
 
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
 			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
@@ -119,14 +119,14 @@
 	};
 
 	/* WiFi/BT combo */
-	w3cbw003c_pins: pinmux_w3cbw003c_pins {
+	w3cbw003c_pins: w3cbw003c-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4)		/* gpmc_ncs3.gpio_54 */
 			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4)		/* uart3_rts_sd.gpio_164 */
 		>;
 	};
 
-	hsusb2_pins: pinmux_hsusb2_pins {
+	hsusb2_pins: hsusb2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
 			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
@@ -222,7 +222,6 @@
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";
-		linux,mtd-name = "micron,mt29c4g96maz";
 		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-chestnut43-common.dtsi
index 2d2c61d7aa86..0d0e62c00916 100644
--- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-chestnut43-common.dtsi
@@ -17,12 +17,12 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
 		};
-		gpio22 {
+		led-gpio22 {
 			label = "overo:blue:gpio22";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
 		};
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43.dts b/arch/arm/boot/dts/ti/omap/omap3-overo-chestnut43.dts
index d147d704b89f..bb53c76fff6c 100644
--- a/arch/arm/boot/dts/omap3-overo-chestnut43.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-chestnut43.dts
@@ -18,14 +18,14 @@
 };
 
 &omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
+	led_pins: led-pins {
 		pinctrl-single,pins = <
 			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
 			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
 		>;
 	};
 
-	button_pins: pinmux_button_pins {
+	button_pins: button-pins {
 		pinctrl-single,pins = <
 			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
 			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
diff --git a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-common-dvi.dtsi
index 339a51fa4119..b1a800f2e940 100644
--- a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-common-dvi.dtsi
@@ -8,7 +8,7 @@
  */
 
 &omap3_pmx_core {
-	dss_dpi_pins: pinmux_dss_dpi_pins {
+	dss_dpi_pins: dss-dpi-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd35.dtsi
index 1d6e88f99eb3..0da561a23f36 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd35.dtsi
@@ -8,7 +8,7 @@
  */
 
 &omap3_pmx_core {
-	dss_dpi_pins: pinmux_dss_dpi_pins {
+	dss_dpi_pins: dss-dpi-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
@@ -41,19 +41,19 @@
 		>;
 	};
 
-	lb035_pins: pinmux_lb035_pins {
+	lb035_pins: lb035-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4)	/* uart2_cts.gpio_144 */
 		>;
 	};
 
-	backlight_pins: pinmux_backlight_pins {
+	backlight_pins: backlight-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4)	/* uart2_rts.gpio_145 */
 		>;
 	};
 
-	mcspi1_pins: pinmux_mcspi1_pins {
+	mcspi1_pins: mcspi1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
 			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
@@ -63,7 +63,7 @@
 		>;
 	};
 
-	ads7846_pins: pinmux_ads7846_pins {
+	ads7846_pins: ads7846-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* csi2_dx1.gpio_114 */
 		>;
@@ -149,7 +149,7 @@
 
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd43.dtsi
index 7e30f9d45790..981f02f088f8 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd43.dtsi
@@ -8,7 +8,7 @@
  */
 
 &omap3_pmx_core {
-	dss_dpi_pins: pinmux_dss_dpi_pins {
+	dss_dpi_pins: dss-dpi-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
@@ -41,19 +41,19 @@
 		>;
 	};
 
-	lte430_pins: pinmux_lte430_pins {
+	lte430_pins: lte430-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4)	/* uart2_cts.gpio_144 */
 		>;
 	};
 
-	backlight_pins: pinmux_backlight_pins {
+	backlight_pins: backlight-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4)	/* uart2_rts.gpio_145 */
 		>;
 	};
 
-	mcspi1_pins: pinmux_mcspi1_pins {
+	mcspi1_pins: mcspi1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
 			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
@@ -62,7 +62,7 @@
 		>;
 	};
 
-	ads7846_pins: pinmux_ads7846_pins {
+	ads7846_pins: ads7846-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* csi2_dx1.gpio_114 */
 		>;
@@ -160,7 +160,7 @@
 
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-common-peripherals.dtsi
index 8a4a02472c9a..00369f699e20 100644
--- a/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-common-peripherals.dtsi
@@ -24,14 +24,14 @@
 };
 
 &omap3_pmx_core {
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
 			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
 		>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
 			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-gallop43-common.dtsi
index 155aec121400..5f6721326f86 100644
--- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-gallop43-common.dtsi
@@ -17,12 +17,12 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
 		};
-		gpio22 {
+		led-gpio22 {
 			label = "overo:blue:gpio22";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
 		};
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43.dts b/arch/arm/boot/dts/ti/omap/omap3-overo-gallop43.dts
index 24b40bdf7ea1..d882a58028c1 100644
--- a/arch/arm/boot/dts/omap3-overo-gallop43.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-gallop43.dts
@@ -18,14 +18,14 @@
 };
 
 &omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
+	led_pins: led-pins {
 		pinctrl-single,pins = <
 			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
 			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
 		>;
 	};
 
-	button_pins: pinmux_button_pins {
+	button_pins: button-pins {
 		pinctrl-single,pins = <
 			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
 			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-palo35-common.dtsi
index 82a04466747a..4b66f622ac13 100644
--- a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-palo35-common.dtsi
@@ -17,12 +17,12 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
 		};
-		gpio22 {
+		led-gpio22 {
 			label = "overo:blue:gpio22";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
 		};
diff --git a/arch/arm/boot/dts/omap3-overo-palo35.dts b/arch/arm/boot/dts/ti/omap/omap3-overo-palo35.dts
index 55e08d56b18b..39c8e9ce5776 100644
--- a/arch/arm/boot/dts/omap3-overo-palo35.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-palo35.dts
@@ -18,14 +18,14 @@
 };
 
 &omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
+	led_pins: led-pins {
 		pinctrl-single,pins = <
 			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
 			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
 		>;
 	};
 
-	button_pins: pinmux_button_pins {
+	button_pins: button-pins {
 		pinctrl-single,pins = <
 			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
 			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-palo43-common.dtsi
index 453a55324fa1..a8f163a899f0 100644
--- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-palo43-common.dtsi
@@ -17,12 +17,12 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
 		};
-		gpio22 {
+		led-gpio22 {
 			label = "overo:blue:gpio22";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
 		};
diff --git a/arch/arm/boot/dts/omap3-overo-palo43.dts b/arch/arm/boot/dts/ti/omap/omap3-overo-palo43.dts
index 092c8325a133..2c0f755ec8cc 100644
--- a/arch/arm/boot/dts/omap3-overo-palo43.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-palo43.dts
@@ -18,14 +18,14 @@
 };
 
 &omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
+	led_pins: led-pins {
 		pinctrl-single,pins = <
 			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
 			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
 		>;
 	};
 
-	button_pins: pinmux_button_pins {
+	button_pins: button-pins {
 		pinctrl-single,pins = <
 			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
 			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/ti/omap/omap3-overo-storm-alto35.dts
index 7f04dfad8203..3eb935df04dc 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-storm-alto35.dts
@@ -14,5 +14,5 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35";
-	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/ti/omap/omap3-overo-storm-chestnut43.dts
index bc5a04e03336..25e82efe4f3b 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-storm-chestnut43.dts
@@ -14,18 +14,18 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43";
-	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
+	led_pins: led-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
 			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
 		>;
 	};
 
-	button_pins: pinmux_button_pins {
+	button_pins: button-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
 			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/ti/omap/omap3-overo-storm-gallop43.dts
index 065c31cbf0e2..0c93ea3f9774 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-storm-gallop43.dts
@@ -14,18 +14,18 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43";
-	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
+	led_pins: led-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
 			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
 		>;
 	};
 
-	button_pins: pinmux_button_pins {
+	button_pins: button-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
 			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/ti/omap/omap3-overo-storm-palo35.dts
index e38c1c51392c..9468ef9f9742 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-storm-palo35.dts
@@ -14,18 +14,18 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35";
-	compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
+	led_pins: led-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
 			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
 		>;
 	};
 
-	button_pins: pinmux_button_pins {
+	button_pins: button-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
 			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/ti/omap/omap3-overo-storm-palo43.dts
index e6dc23159c4d..9feead584479 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-storm-palo43.dts
@@ -14,18 +14,18 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43";
-	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
+	led_pins: led-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
 			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
 		>;
 	};
 
-	button_pins: pinmux_button_pins {
+	button_pins: button-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
 			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/ti/omap/omap3-overo-storm-summit.dts
index 587c08ce282d..92f56b9d009d 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-summit.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-storm-summit.dts
@@ -14,11 +14,11 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit";
-	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
+	led_pins: led-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
 		>;
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/ti/omap/omap3-overo-storm-tobi.dts
index f57de6010994..6d14466c180a 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-storm-tobi.dts
@@ -14,6 +14,6 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi";
-	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
 
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/ti/omap/omap3-overo-storm-tobiduo.dts
index 281af6c113be..bcf20ff3f281 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-storm-tobiduo.dts
@@ -14,5 +14,5 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo";
-	compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
diff --git a/arch/arm/boot/dts/omap3-overo-storm.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-storm.dtsi
index 2af15d5f61f9..da583b47ed8d 100644
--- a/arch/arm/boot/dts/omap3-overo-storm.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-storm.dtsi
@@ -12,7 +12,7 @@
 			&hsusb2_2_pins
 	>;
 
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+	hsusb2_2_pins: hsusb2-2-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
 			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
@@ -23,7 +23,7 @@
 		>;
 	};
 
-	w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins {
+	w3cbw003c_2_pins: w3cbw003c-2-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 */
 		>;
diff --git a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-summit-common.dtsi
index df7450f17ffd..ec03ca17e98b 100644
--- a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-summit-common.dtsi
@@ -15,7 +15,7 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/omap3-overo-summit.dts b/arch/arm/boot/dts/ti/omap/omap3-overo-summit.dts
index a6c9799fe491..da5ca80430ae 100644
--- a/arch/arm/boot/dts/omap3-overo-summit.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-summit.dts
@@ -18,7 +18,7 @@
 };
 
 &omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
+	led_pins: led-pins {
 		pinctrl-single,pins = <
 			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
 		>;
diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-tobi-common.dtsi
index 9bf4b88a4b50..5432e4e16ab5 100644
--- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-tobi-common.dtsi
@@ -13,7 +13,7 @@
 / {
 	leds {
 		compatible = "gpio-leds";
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/omap3-overo-tobi.dts b/arch/arm/boot/dts/ti/omap/omap3-overo-tobi.dts
index ce3f2404f329..ce3f2404f329 100644
--- a/arch/arm/boot/dts/omap3-overo-tobi.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-tobi.dts
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-tobiduo-common.dtsi
index 218a10c0d815..218a10c0d815 100644
--- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-tobiduo-common.dtsi
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo.dts b/arch/arm/boot/dts/ti/omap/omap3-overo-tobiduo.dts
index fc6163eae45e..fc6163eae45e 100644
--- a/arch/arm/boot/dts/omap3-overo-tobiduo.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-tobiduo.dts
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo.dtsi
index cc9263e99254..7dc044e87226 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo.dtsi
@@ -12,7 +12,7 @@
 			&hsusb2_2_pins
 	>;
 
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+	hsusb2_2_pins: hsusb2-2-pins {
 		pinctrl-single,pins = <
 			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
 			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
@@ -23,7 +23,7 @@
 		>;
 	};
 
-	w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins {
+	w3cbw003c_2_pins: w3cbw003c-2-pins {
 		pinctrl-single,pins = <
 			OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 */
 		>;
diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/ti/omap/omap3-pandora-1ghz.dts
index ea509956d7ac..8d8c9085e6ff 100644
--- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-pandora-1ghz.dts
@@ -16,7 +16,7 @@
 / {
 	model = "Pandora Handheld Console 1GHz";
 
-	compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
@@ -27,7 +27,7 @@
 		&control_pins
 	>;
 
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+	hsusb2_2_pins: hsusb2-2-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
 			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
@@ -38,7 +38,7 @@
 		>;
 	};
 
-	mmc3_pins: pinmux_mmc3_pins {
+	mmc3_pins: mmc3-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
 			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_ctl.sdmmc3_cmd */
@@ -49,7 +49,7 @@
 		>;
 	};
 
-	control_pins: pinmux_control_pins {
+	control_pins: control-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* etk_d0.gpio_14 =  HP_SHUTDOWN */
 			OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4)		/* etk_d1.gpio_15 =  BT_SHUTDOWN */
diff --git a/arch/arm/boot/dts/omap3-pandora-600mhz.dts b/arch/arm/boot/dts/ti/omap/omap3-pandora-600mhz.dts
index 6bd9041942f2..2d5eac3ffc6c 100644
--- a/arch/arm/boot/dts/omap3-pandora-600mhz.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-pandora-600mhz.dts
@@ -27,7 +27,7 @@
 		&control_pins
 	>;
 
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+	hsusb2_2_pins: hsusb2-2-pins {
 		pinctrl-single,pins = <
 			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
 			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
@@ -38,7 +38,7 @@
 		>;
 	};
 
-	mmc3_pins: pinmux_mmc3_pins {
+	mmc3_pins: mmc3-pins {
 		pinctrl-single,pins = <
 			OMAP3430_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
 			OMAP3430_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_ctl.sdmmc3_cmd */
@@ -49,7 +49,7 @@
 		>;
 	};
 
-	control_pins: pinmux_control_pins {
+	control_pins: control-pins {
 		pinctrl-single,pins = <
 			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* etk_d0.gpio_14 =  HP_SHUTDOWN */
 			OMAP3430_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4)		/* etk_d1.gpio_15 =  BT_SHUTDOWN */
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-pandora-common.dtsi
index 559853764487..06c5b2358999 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-pandora-common.dtsi
@@ -205,7 +205,7 @@
 	};
 
 	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
+	hsusb2_phy: hsusb2-phy-pins {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */
 		vcc-supply = <&vaux2>;
@@ -251,7 +251,7 @@
 
 &omap3_pmx_core {
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
 			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
@@ -262,7 +262,7 @@
 		>;
 	};
 
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
 			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
@@ -277,7 +277,7 @@
 		>;
 	};
 
-	dss_dpi_pins: pinmux_dss_dpi_pins {
+	dss_dpi_pins: dss-dpi-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
@@ -311,14 +311,14 @@
 		>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
 			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
-	led_pins: pinmux_leds_pins {
+	led_pins: leds-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4)	/* GPIO_128 */
 			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)	/* GPIO_129 */
@@ -327,7 +327,7 @@
 		>;
 	};
 
-	button_pins: pinmux_button_pins {
+	button_pins: button-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE4)	/* GPIO_96 */
 			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE4)	/* GPIO_97 */
@@ -349,7 +349,7 @@
 		>;
 	};
 
-	penirq_pins: pinmux_penirq_pins {
+	penirq_pins: penirq-pins {
 		pinctrl-single,pins = <
 			/* here we could enable to wakeup the cpu from suspend by a pen touch */
 			OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE4)	/* GPIO_94 */
@@ -651,7 +651,7 @@
 		pinctrl-0 = <&penirq_pins>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <30 IRQ_TYPE_NONE>;	/* GPIO_94 */
-		pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&vaux4>;
 
 		ti,x-min = /bits/ 16 <0>;
diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/ti/omap/omap3-panel-sharp-ls037v7dw01.dtsi
index 2dbb687d4df2..2dbb687d4df2 100644
--- a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-panel-sharp-ls037v7dw01.dtsi
diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/ti/omap/omap3-sb-t35.dtsi
index 5ec0893415e0..da80d7b7d4b1 100644
--- a/arch/arm/boot/dts/omap3-sb-t35.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-sb-t35.dtsi
@@ -56,27 +56,27 @@
 };
 
 &omap3_pmx_core {
-	smsc2_pins: pinmux_smsc2_pins {
+	smsc2_pins: smsc2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20b6, PIN_OUTPUT | MUX_MODE0)	/* gpmc_ncs4.gpmc_ncs4 */
 			OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_wait3.gpio_65 */
 		>;
 	};
 
-	tfp410_pins: pinmux_tfp410_pins {
+	tfp410_pins: tfp410-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs3.gpio_54 */
 		>;
 	};
 
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
 			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
 		>;
 	};
 
-	sb_t35_audio_amp: pinmux_sb_t35_audio_amp {
+	sb_t35_audio_amp: sb-t35-audio-amp-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) /* gpmc_nbe1.gpio_61 */
 		>;
@@ -89,7 +89,7 @@
 
 	clock-frequency = <400000>;
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
diff --git a/arch/arm/boot/dts/omap3-sbc-t3517.dts b/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts
index a69d32860421..959fdeeb769e 100644
--- a/arch/arm/boot/dts/omap3-sbc-t3517.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts
@@ -36,14 +36,14 @@
 			&usb_hub_pins
 		    >;
 
-	mmc1_aux_pins: pinmux_mmc1_aux_pins {
+	mmc1_aux_pins: mmc1-aux-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59   */
 			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */
 		>;
 	};
 
-	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
+	sb_t35_usb_hub_pins: sb-t35-usb-hub-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */
 		>;
@@ -57,8 +57,8 @@
 		&mmc1_aux_pins
 	>;
 
-	wp-gpios =  <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59  */
-	cd-gpios =  <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
+	wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59  */
+	cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
 };
 
 &dss {
diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/ti/omap/omap3-sbc-t3530.dts
index 24bf3fd86641..1beefc319422 100644
--- a/arch/arm/boot/dts/omap3-sbc-t3530.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-sbc-t3530.dts
@@ -20,7 +20,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sb_t35_usb_hub_pins>;
 
-	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
+	sb_t35_usb_hub_pins: sb-t35-usb-hub-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
 		>;
diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/ti/omap/omap3-sbc-t3730.dts
index eb3893b9535e..aefc1187ebc9 100644
--- a/arch/arm/boot/dts/omap3-sbc-t3730.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-sbc-t3730.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "CompuLab SBC-T3730 with CM-T3730";
-	compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3";
 
 	aliases {
 		display0 = &dvi0;
@@ -20,7 +20,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sb_t35_usb_hub_pins>;
 
-	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
+	sb_t35_usb_hub_pins: sb-t35-usb-hub-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
 		>;
diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/ti/omap/omap3-sniper.dts
index b6879cdc5c13..79e004057482 100644
--- a/arch/arm/boot/dts/omap3-sniper.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-sniper.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "LG Optimus Black";
-	compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap3";
 
 	cpus {
 		cpu@0 {
@@ -26,48 +26,48 @@
 &omap3_pmx_core {
 	pinctrl-names = "default";
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx */
 			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx */
 		>;
 	};
 
-	dp3t_sel_pins: pinmux_dp3t_sel_pins {
+	dp3t_sel_pins: dp3t-sel-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE4)	/* gpio_161 */
 			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* gpio_162 */
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)	/* i2c1_scl */
 			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
-	i2c2_pins: pinmux_i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)	/* i2c2_scl */
 			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
 
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl */
 			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
-	lp8720_en_pin: pinmux_lp8720_en_pin {
+	lp8720_en_pin: lp8720-en-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2080, PIN_OUTPUT | MUX_MODE4)	/* gpio_37 */
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT | MUX_MODE0)	/* sdmmc1_clk */
 			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd */
@@ -78,7 +78,7 @@
 		>;
 	};
 
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT | MUX_MODE0)	/* sdmmc2_clk */
 			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT | MUX_MODE0)	/* sdmmc2_cmd */
@@ -93,7 +93,7 @@
 		>;
 	};
 
-	usb_otg_hs_pins: pinmux_usb_otg_hs_pins {
+	usb_otg_hs_pins: usb-otg-hs-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk */
 			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp */
@@ -114,7 +114,7 @@
 &omap3_pmx_wkup {
 	pinctrl-names = "default";
 
-	mmc1_cd_pin: pinmux_mmc1_cd_pin {
+	mmc1_cd_pin: mmc1-cd-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | MUX_MODE4)		/* gpio_10 */
 		>;
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/ti/omap/omap3-tao3530.dtsi
index 7f440d11f7e7..92a5846048bd 100644
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-tao3530.dtsi
@@ -43,7 +43,7 @@
 	};
 
 	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
+	hsusb2_phy: hsusb2-phy-pins {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;	/* gpio_162 */
 		vcc-supply = <&hsusb2_power>;
@@ -70,7 +70,7 @@
 };
 
 &omap3_pmx_core {
-	hsusbb2_pins: pinmux_hsusbb2_pins {
+	hsusbb2_pins: hsusbb2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
 			OMAP3_CORE1_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
@@ -87,7 +87,7 @@
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
 			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
@@ -102,7 +102,7 @@
 		>;
 	};
 
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
 			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
@@ -114,27 +114,27 @@
 	};
 
 	/* wlan GPIO output for WLAN_EN */
-	wlan_gpio: pinmux_wlan_gpio {
+	wlan_gpio: wlan-gpio-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_fsr gpio_157 */
 		>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
 			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
 			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
 		>;
 	};
 
-	mcspi1_pins: pinmux_mcspi1_pins {
+	mcspi1_pins: mcspi1-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
 			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
@@ -143,7 +143,7 @@
 		>;
 	};
 
-	mcspi3_pins: pinmux_mcspi3_pins {
+	mcspi3_pins: mcspi3-pins {
 		pinctrl-single,pins = <
                         OMAP3_CORE1_IOPAD(0x25dc, PIN_OUTPUT | MUX_MODE1)	/* etk_d0.mcspi3_simo gpio14 INPUT | MODE1 */
                         OMAP3_CORE1_IOPAD(0x25de, PIN_INPUT_PULLUP | MUX_MODE1)	/* etk_d1.mcspi3_somi gpio15 INPUT | MODE1 */
@@ -152,7 +152,7 @@
 		>;
 	};
 
-	mcbsp3_pins: pinmux_mcbsp3_pins {
+	mcbsp3_pins: mcbsp3-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0)	/* mcbsp3_dx.uart2_cts */
 			OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0)	/* mcbsp3_dr.uart2_rts */
diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/ti/omap/omap3-thunder.dts
index d82cab8e213a..c87956c59b08 100644
--- a/arch/arm/boot/dts/omap3-thunder.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-thunder.dts
@@ -12,7 +12,7 @@
 };
 
 &omap3_pmx_core {
-	dss_dpi_pins: pinmux_dss_dpi_pins {
+	dss_dpi_pins: dss-dpi-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
 			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
@@ -45,13 +45,13 @@
 		>;
 	};
 
-	lte430_pins: pinmux_lte430_pins {
+	lte430_pins: lte430-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 */
 		>;
 	};
 
-	backlight_pins: pinmux_backlight_pins {
+	backlight_pins: backlight-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 */
 		>;
diff --git a/arch/arm/boot/dts/ti/omap/omap3-zoom3.dts b/arch/arm/boot/dts/ti/omap/omap3-zoom3.dts
new file mode 100644
index 000000000000..9f1e125fd77b
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap3-zoom3.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap-zoom-common.dtsi"
+
+/ {
+	model = "TI Zoom3";
+	compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	vddvario: regulator-vddvario {
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	/* REVISIT: twl gpio0 is mmc0_cd */
+	mmc1_pins: mmc1-pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: mmc2-pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
+		>;
+	};
+
+	mmc3_pins: mmc3-pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 WLAN IRQ */
+			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs1.sdmmc3_cmd */
+		>;
+	};
+
+	uart1_pins: uart1-pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
+			OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
+		>;
+	};
+
+	uart2_pins: uart2-pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	uart3_pins: uart3-pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	/* wl12xx GPIO output for WLAN_EN */
+	wl12xx_gpio: wl12xx-gpio-pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x211a, PIN_OUTPUT| MUX_MODE4)		/* cam_d2.gpio_101 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	mmc3_2_pins: mmc3-2-pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
+			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
+			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d5.sdmmc3_dat1 */
+			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	wlan_host_wkup: wlan-host-wkup-pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	/*
+	 * TVP5146 Video decoder-in for analog input support.
+	 */
+	tvp5146@5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vqmmc-supply = <&vsim>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+/*
+&mmc2 {
+	vmmc-supply = <&vmmc2>;
+	ti,non-removable;
+	bus-width = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+};
+*/
+&mmc3 {
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins &mmc3_2_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 162 */
+		ref-clock-frequency = <26000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/ti/omap/omap3.dtsi
index 825075ff0e34..817474ee2d13 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3.dtsi
@@ -862,14 +862,14 @@
 			#size-cells = <1>;
 			ranges;
 
-			usbhsohci: ohci@48064400 {
+			usbhsohci: usb@48064400 {
 				compatible = "ti,ohci-omap3";
 				reg = <0x48064400 0x400>;
 				interrupts = <76>;
 				remote-wakeup-connected;
 			};
 
-			usbhsehci: ehci@48064800 {
+			usbhsehci: usb@48064800 {
 				compatible = "ti,ehci-omap";
 				reg = <0x48064800 0x400>;
 				interrupts = <77>;
@@ -893,15 +893,37 @@
 			#gpio-cells = <2>;
 		};
 
-		usb_otg_hs: usb_otg_hs@480ab000 {
-			compatible = "ti,omap3-musb";
-			reg = <0x480ab000 0x1000>;
-			interrupts = <92>, <93>;
-			interrupt-names = "mc", "dma";
-			ti,hwmods = "usb_otg_hs";
-			multipoint = <1>;
-			num-eps = <16>;
-			ram-bits = <12>;
+		usb_otg_target: target-module@480ab000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x480ab400 0x4>,
+			      <0x480ab404 0x4>,
+			      <0x480ab408 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Clock defined in the SoC specific dtsi file */
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x480ab000 0x1000>;
+
+			usb_otg_hs: usb@0 {
+				compatible = "ti,omap3-musb";
+				reg = <0 0x1000>;
+				interrupts = <92>, <93>;
+				interrupt-names = "mc", "dma";
+				multipoint = <1>;
+				num-eps = <16>;
+				ram-bits = <12>;
+			};
 		};
 
 		dss: dss@48050000 {
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/ti/omap/omap3430-sdp.dts
index 258ecd9e4519..cc5e9035ef73 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3430-sdp.dts
@@ -105,7 +105,6 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name = "micron,mt29f1g08abb";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ti,nand-ecc-opt = "sw";
@@ -148,7 +147,6 @@
 	};
 
 	onenand@2,0 {
-		linux,mtd-name = "samsung,kfm2g16q2m-deb8";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "ti,omap2-onenand";
diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap3430es1-clocks.dtsi
index 24adfac26be0..6e754d265f18 100644
--- a/arch/arm/boot/dts/omap3430es1-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3430es1-clocks.dtsi
@@ -50,30 +50,31 @@
 		compatible = "ti,clksel";
 		reg = <0xa00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		d2d_26m_fck: clock-d2d-26m-fck {
+		d2d_26m_fck: clock-d2d-26m-fck@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "d2d_26m_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <3>;
 		};
 
-		fshostusb_fck: clock-fshostusb-fck {
+		fshostusb_fck: clock-fshostusb-fck@5 {
+			reg = <5>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "fshostusb_fck";
 			clocks = <&core_48m_fck>;
-			ti,bit-shift = <5>;
 		};
 
-		ssi_ssr_gate_fck_3430es1: clock-ssi-ssr-gate-fck-3430es1 {
+		ssi_ssr_gate_fck_3430es1: clock-ssi-ssr-gate-fck-3430es1@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-no-wait-gate-clock";
 			clock-output-names = "ssi_ssr_gate_fck_3430es1";
 			clocks = <&corex2_fck>;
-			ti,bit-shift = <0>;
 		};
 	};
 
@@ -81,23 +82,24 @@
 		compatible = "ti,clksel";
 		reg = <0xa40>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		ssi_ssr_div_fck_3430es1: clock-ssi-ssr-div-fck-3430es1 {
+		ssi_ssr_div_fck_3430es1: clock-ssi-ssr-div-fck-3430es1@8 {
+			reg = <8>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-divider-clock";
 			clock-output-names = "ssi_ssr_div_fck_3430es1";
 			clocks = <&corex2_fck>;
-			ti,bit-shift = <8>;
 			ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
 		};
 
-		usb_l4_div_ick: clock-usb-l4-div-ick {
+		usb_l4_div_ick: clock-usb-l4-div-ick@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-divider-clock";
 			clock-output-names = "usb_l4_div_ick";
 			clocks = <&l4_ick>;
-			ti,bit-shift = <4>;
 			ti,max-div = <1>;
 			ti,index-starts-at-one;
 		};
@@ -121,38 +123,39 @@
 		compatible = "ti,clksel";
 		reg = <0xa10>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		hsotgusb_ick_3430es1: clock-hsotgusb-ick-3430es1 {
+		hsotgusb_ick_3430es1: clock-hsotgusb-ick-3430es1@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-no-wait-interface-clock";
 			clock-output-names = "hsotgusb_ick_3430es1";
 			clocks = <&core_l3_ick>;
-			ti,bit-shift = <4>;
 		};
 
-		fac_ick: clock-fac-ick {
+		fac_ick: clock-fac-ick@8 {
+			reg = <8>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "fac_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <8>;
 		};
 
-		ssi_ick: clock-ssi-ick-3430es1 {
+		ssi_ick: clock-ssi-ick-3430es1@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-no-wait-interface-clock";
 			clock-output-names = "ssi_ick_3430es1";
 			clocks = <&ssi_l4_ick>;
-			ti,bit-shift = <0>;
 		};
 
-		usb_l4_gate_ick: clock-usb-l4-gate-ick {
+		usb_l4_gate_ick: clock-usb-l4-gate-ick@5 {
+			reg = <5>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-interface-clock";
 			clock-output-names = "usb_l4_gate_ick";
 			clocks = <&l4_ick>;
-			ti,bit-shift = <5>;
 		};
 	};
 
@@ -174,14 +177,15 @@
 		compatible = "ti,clksel";
 		reg = <0xe00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		dss1_alwon_fck: clock-dss1-alwon-fck-3430es1 {
+		dss1_alwon_fck: clock-dss1-alwon-fck-3430es1@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "dss1_alwon_fck_3430es1";
 			clocks = <&dpll4_m4x2_ck>;
-			ti,bit-shift = <0>;
 			ti,set-rate-parent;
 		};
 	};
diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap34xx-omap36xx-clocks.dtsi
index 8374532f20e2..ca6372711baf 100644
--- a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap34xx-omap36xx-clocks.dtsi
@@ -17,46 +17,47 @@
 		compatible = "ti,clksel";
 		reg = <0xa14>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		aes1_ick: clock-aes1-ick {
+		aes1_ick: clock-aes1-ick@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "aes1_ick";
 			clocks = <&security_l4_ick2>;
-			ti,bit-shift = <3>;
 		};
 
-		rng_ick: clock-rng-ick {
+		rng_ick: clock-rng-ick@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "rng_ick";
 			clocks = <&security_l4_ick2>;
-			ti,bit-shift = <2>;
 		};
 
-		sha11_ick: clock-sha11-ick {
+		sha11_ick: clock-sha11-ick@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "sha11_ick";
 			clocks = <&security_l4_ick2>;
-			ti,bit-shift = <1>;
 		};
 
-		des1_ick: clock-des1-ick {
+		des1_ick: clock-des1-ick@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "des1_ick";
 			clocks = <&security_l4_ick2>;
-			ti,bit-shift = <0>;
 		};
 
-		pka_ick: clock-pka-ick {
+		pka_ick: clock-pka-ick@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "pka_ick";
 			clocks = <&security_l3_ick>;
-			ti,bit-shift = <4>;
 		};
 	};
 
@@ -65,23 +66,24 @@
 		compatible = "ti,clksel";
 		reg = <0xf00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		cam_mclk: clock-cam-mclk {
+		cam_mclk: clock-cam-mclk@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "cam_mclk";
 			clocks = <&dpll4_m5x2_ck>;
-			ti,bit-shift = <0>;
 			ti,set-rate-parent;
 		};
 
-		csi2_96m_fck: clock-csi2-96m-fck {
+		csi2_96m_fck: clock-csi2-96m-fck@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "csi2_96m_fck";
 			clocks = <&core_96m_fck>;
-			ti,bit-shift = <1>;
 		};
 	};
 
@@ -105,46 +107,47 @@
 		compatible = "ti,clksel";
 		reg = <0xa10>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		icr_ick: clock-icr-ick {
+		icr_ick: clock-icr-ick@29 {
+			reg = <29>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "icr_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <29>;
 		};
 
-		des2_ick: clock-des2-ick {
+		des2_ick: clock-des2-ick@26 {
+			reg = <26>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "des2_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <26>;
 		};
 
-		mspro_ick: clock-mspro-ick {
+		mspro_ick: clock-mspro-ick@23 {
+			reg = <23>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mspro_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <23>;
 		};
 
-		mailboxes_ick: clock-mailboxes-ick {
+		mailboxes_ick: clock-mailboxes-ick@7 {
+			reg = <7>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mailboxes_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <7>;
 		};
 
-		sad2d_ick: clock-sad2d-ick {
+		sad2d_ick: clock-sad2d-ick@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "sad2d_ick";
 			clocks = <&l3_ick>;
-			ti,bit-shift = <3>;
 		};
 	};
 
@@ -160,22 +163,23 @@
 		compatible = "ti,clksel";
 		reg = <0xc00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		sr1_fck: clock-sr1-fck {
+		sr1_fck: clock-sr1-fck@6 {
+			reg = <6>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "sr1_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <6>;
 		};
 
-		sr2_fck: clock-sr2-fck {
+		sr2_fck: clock-sr2-fck@7 {
+			reg = <7>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "sr2_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <7>;
 		};
 	};
 
@@ -228,22 +232,23 @@
 		compatible = "ti,clksel";
 		reg = <0xa00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		modem_fck: clock-modem-fck {
+		modem_fck: clock-modem-fck@31 {
+			reg = <31>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "modem_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <31>;
 		};
 
-		mspro_fck: clock-mspro-fck {
+		mspro_fck: clock-mspro-fck@23 {
+			reg = <23>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "mspro_fck";
 			clocks = <&core_96m_fck>;
-			ti,bit-shift = <23>;
 		};
 	};
 
@@ -252,14 +257,15 @@
 		compatible = "ti,clksel";
 		reg = <0xa18>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#ssize-cells = <0>;
 
-		mad2d_ick: clock-mad2d-ick {
+		mad2d_ick: clock-mad2d-ick@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mad2d_ick";
 			clocks = <&l3_ick>;
-			ti,bit-shift = <3>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/ti/omap/omap34xx.dtsi
index 2eb73ae7ef3e..acdd0ee34421 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap34xx.dtsi
@@ -25,7 +25,7 @@
 		compatible = "operating-points-v2-ti-cpu";
 		syscon = <&scm_conf>;
 
-		opp1-125000000 {
+		opp-125000000 {
 			opp-hz = /bits/ 64 <125000000>;
 			/*
 			 * we currently only select the max voltage from table
@@ -40,32 +40,32 @@
 			opp-supported-hw = <0xffffffff 3>;
 		};
 
-		opp2-250000000 {
+		opp-250000000 {
 			opp-hz = /bits/ 64 <250000000>;
 			opp-microvolt = <1075000 1075000 1075000>;
 			opp-supported-hw = <0xffffffff 3>;
 			opp-suspend;
 		};
 
-		opp3-500000000 {
+		opp-500000000 {
 			opp-hz = /bits/ 64 <500000000>;
 			opp-microvolt = <1200000 1200000 1200000>;
 			opp-supported-hw = <0xffffffff 3>;
 		};
 
-		opp4-550000000 {
+		opp-550000000 {
 			opp-hz = /bits/ 64 <550000000>;
 			opp-microvolt = <1275000 1275000 1275000>;
 			opp-supported-hw = <0xffffffff 3>;
 		};
 
-		opp5-600000000 {
+		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1350000 1350000 1350000>;
 			opp-supported-hw = <0xffffffff 3>;
 		};
 
-		opp6-720000000 {
+		opp-720000000 {
 			opp-hz = /bits/ 64 <720000000>;
 			opp-microvolt = <1350000 1350000 1350000>;
 			/* only high-speed grade omap3530 devices */
@@ -164,12 +164,13 @@
 			clock-names = "fck", "ick";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0 0x50000000 0x4000>;
+			ranges = <0 0x50000000 0x10000>;
 
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
+			gpu@0 {
+				compatible = "ti,omap3430-gpu", "img,powervr-sgx530";
+				reg = <0x0 0x10000>; /* 64kB */
+				interrupts = <21>;
+			};
 		};
 	};
 
@@ -189,6 +190,10 @@
 		      "ssi_ick";
 };
 
+&usb_otg_target {
+	clocks = <&hsotgusb_ick_3430es2>;
+};
+
 /include/ "omap34xx-omap36xx-clocks.dtsi"
 /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
index dcc5cfcd1fe6..656cf80f878a 100644
--- a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
@@ -138,14 +138,15 @@
 		compatible = "ti,clksel";
 		reg = <0xa18>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		usbtll_ick: clock-usbtll-ick {
+		usbtll_ick: clock-usbtll-ick@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "usbtll_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <2>;
 		};
 	};
 
@@ -153,14 +154,15 @@
 		compatible = "ti,clksel";
 		reg = <0xa10>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		mmchs3_ick: clock-mmchs3-ick {
+		mmchs3_ick: clock-mmchs3-ick@30 {
+			reg = <30>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mmchs3_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <30>;
 		};
 	};
 
@@ -168,14 +170,15 @@
 		compatible = "ti,clksel";
 		reg = <0xa00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		mmchs3_fck: clock-mmchs3-fck {
+		mmchs3_fck: clock-mmchs3-fck@30 {
+			reg = <30>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "mmchs3_fck";
 			clocks = <&core_96m_fck>;
-			ti,bit-shift = <30>;
 		};
 	};
 
@@ -183,14 +186,15 @@
 		compatible = "ti,clksel";
 		reg = <0xe00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		dss1_alwon_fck: clock-dss1-alwon-fck-3430es2 {
+		dss1_alwon_fck: clock-dss1-alwon-fck-3430es2@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,dss-gate-clock";
 			clock-output-names = "dss1_alwon_fck_3430es2";
 			clocks = <&dpll4_m4x2_ck>;
-			ti,bit-shift = <0>;
 			ti,set-rate-parent;
 		};
 	};
diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap36xx-clocks.dtsi
index c5fdb2bd765d..1e90f2b1ef8b 100644
--- a/arch/arm/boot/dts/omap36xx-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap36xx-clocks.dtsi
@@ -62,14 +62,15 @@
 		compatible = "ti,clksel";
 		reg = <0x1000>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		uart4_fck: clock-uart4-fck {
+		uart4_fck: clock-uart4-fck@18 {
+			reg = <18>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "uart4_fck";
 			clocks = <&per_48m_fck>;
-			ti,bit-shift = <18>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap36xx-omap3430es2plus-clocks.dtsi
index c94eb86d3da7..798acb839db4 100644
--- a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap36xx-omap3430es2plus-clocks.dtsi
@@ -9,14 +9,15 @@
 		compatible = "ti,clksel";
 		reg = <0xa00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		ssi_ssr_gate_fck_3430es2: clock-ssi-ssr-gate-fck-3430es2 {
+		ssi_ssr_gate_fck_3430es2: clock-ssi-ssr-gate-fck-3430es2@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-no-wait-gate-clock";
 			clock-output-names = "ssi_ssr_gate_fck_3430es2";
 			clocks = <&corex2_fck>;
-			ti,bit-shift = <0>;
 		};
 	};
 
@@ -24,14 +25,15 @@
 		compatible = "ti,clksel";
 		reg = <0xa40>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		ssi_ssr_div_fck_3430es2: clock-ssi-ssr-div-fck-3430es2 {
+		ssi_ssr_div_fck_3430es2: clock-ssi-ssr-div-fck-3430es2@8 {
+			reg = <8>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-divider-clock";
 			clock-output-names = "ssi_ssr_div_fck_3430es2";
 			clocks = <&corex2_fck>;
-			ti,bit-shift = <8>;
 			ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
 		};
 	};
@@ -54,22 +56,23 @@
 		compatible = "ti,clksel";
 		reg = <0xa10>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		hsotgusb_ick_3430es2: clock-hsotgusb-ick-3430es2 {
+		hsotgusb_ick_3430es2: clock-hsotgusb-ick-3430es2@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-hsotgusb-interface-clock";
 			clock-output-names = "hsotgusb_ick_3430es2";
 			clocks = <&core_l3_ick>;
-			ti,bit-shift = <4>;
 		};
 
-		ssi_ick: clock-ssi-ick-3430es2 {
+		ssi_ick: clock-ssi-ick-3430es2@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-ssi-interface-clock";
 			clock-output-names = "ssi_ick_3430es2";
 			clocks = <&ssi_l4_ick>;
-			ti,bit-shift = <0>;
 		};
 	};
 
@@ -85,14 +88,15 @@
 		compatible = "ti,clksel";
 		reg = <0xc00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		usim_gate_fck: clock-usim-gate-fck {
+		usim_gate_fck: clock-usim-gate-fck@9 {
+			reg = <9>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "usim_gate_fck";
 			clocks = <&omap_96m_fck>;
-			ti,bit-shift = <9>;
 		};
 	};
 
@@ -172,14 +176,15 @@
 		compatible = "ti,clksel";
 		reg = <0xc40>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		usim_mux_fck: clock-usim-mux-fck {
+		usim_mux_fck: clock-usim-mux-fck@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "usim_mux_fck";
 			clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
-			ti,bit-shift = <3>;
 			ti,index-starts-at-one;
 		};
 	};
@@ -194,14 +199,15 @@
 		compatible = "ti,clksel";
 		reg = <0xc10>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		usim_ick: clock-usim-ick {
+		usim_ick: clock-usim-ick@9 {
+			reg = <9>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "usim_ick";
 			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <9>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/ti/omap/omap36xx.dtsi
index 32ac7924a130..c217094b50ab 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap36xx.dtsi
@@ -30,7 +30,8 @@
 		compatible = "operating-points-v2-ti-cpu";
 		syscon = <&scm_conf>;
 
-		opp50-300000000 {
+		opp-50-300000000 {
+			/* OPP50 */
 			opp-hz = /bits/ 64 <300000000>;
 			/*
 			 * we currently only select the max voltage from table
@@ -48,30 +49,34 @@
 			opp-suspend;
 		};
 
-		opp100-600000000 {
+		opp-100-600000000 {
+			/* OPP100 */
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1200000 1200000 1200000>,
 					 <1200000 1200000 1200000>;
 			opp-supported-hw = <0xffffffff 3>;
 		};
 
-		opp130-800000000 {
+		opp-130-800000000 {
+			/* OPP130 */
 			opp-hz = /bits/ 64 <800000000>;
 			opp-microvolt = <1325000 1325000 1325000>,
 					 <1325000 1325000 1325000>;
 			opp-supported-hw = <0xffffffff 3>;
 		};
 
-		opp1g-1000000000 {
+		opp-1000000000 {
+			/* OPP1G */
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <1375000 1375000 1375000>,
 					 <1375000 1375000 1375000>;
 			/* only on am/dm37x with speed-binned bit set */
 			opp-supported-hw = <0xffffffff 2>;
+			turbo-mode;
 		};
 	};
 
-	opp_supply_mpu_iva: opp_supply {
+	opp_supply_mpu_iva: opp-supply {
 		compatible = "ti,omap-opp-supply";
 		ti,absolute-max-voltage-uv = <1375000>;
 	};
@@ -207,10 +212,11 @@
 			#size-cells = <1>;
 			ranges = <0 0x50000000 0x2000000>;
 
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
+			gpu@0 {
+				compatible = "ti,omap3630-gpu", "img,powervr-sgx530";
+				reg = <0x0 0x2000000>; /* 32MB */
+				interrupts = <21>;
+			};
 		};
 	};
 
@@ -240,6 +246,10 @@
 		      "ssi_ick";
 };
 
+&usb_otg_target {
+	clocks = <&hsotgusb_ick_3430es2>;
+};
+
 /include/ "omap34xx-omap36xx-clocks.dtsi"
 /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap3xxx-clocks.dtsi
index 2e13ca11ceea..901ee79a66f1 100644
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3xxx-clocks.dtsi
@@ -83,29 +83,31 @@
 		compatible = "ti,clksel";
 		reg = <0x68>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		mcbsp5_mux_fck: clock-mcbsp5-mux-fck {
+		mcbsp5_mux_fck: clock-mcbsp5-mux-fck@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "mcbsp5_mux_fck";
 			clocks = <&core_96m_fck>, <&mcbsp_clks>;
-			ti,bit-shift = <4>;
 		};
 
-		mcbsp3_mux_fck: clock-mcbsp3-mux-fck {
+		mcbsp3_mux_fck: clock-mcbsp3-mux-fck@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "mcbsp3_mux_fck";
 			clocks = <&per_96m_fck>, <&mcbsp_clks>;
 		};
 
-		mcbsp4_mux_fck: clock-mcbsp4-mux-fck {
+		mcbsp4_mux_fck: clock-mcbsp4-mux-fck@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "mcbsp4_mux_fck";
 			clocks = <&per_96m_fck>, <&mcbsp_clks>;
-			ti,bit-shift = <2>;
 		};
 	};
 
@@ -120,22 +122,23 @@
 		compatible = "ti,clksel";
 		reg = <0x4>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		mcbsp1_mux_fck: clock-mcbsp1-mux-fck {
+		mcbsp1_mux_fck: clock-mcbsp1-mux-fck@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "mcbsp1_mux_fck";
 			clocks = <&core_96m_fck>, <&mcbsp_clks>;
-			ti,bit-shift = <2>;
 		};
 
-		mcbsp2_mux_fck: clock-mcbsp2-mux-fck {
+		mcbsp2_mux_fck: clock-mcbsp2-mux-fck@6 {
+			reg = <6>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "mcbsp2_mux_fck";
 			clocks = <&per_96m_fck>, <&mcbsp_clks>;
-			ti,bit-shift = <6>;
 		};
 	};
 
@@ -259,79 +262,81 @@
 		compatible = "ti,clksel";
 		reg = <0x1140>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		dpll3_m3_ck: clock-dpll3-m3 {
+		dpll3_m3_ck: clock-dpll3-m3@16 {
+			reg = <16>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "dpll3_m3_ck";
 			clocks = <&dpll3_ck>;
-			ti,bit-shift = <16>;
 			ti,max-div = <31>;
 			ti,index-starts-at-one;
 		};
 
-		dpll4_m6_ck: clock-dpll4-m6 {
+		dpll4_m6_ck: clock-dpll4-m6@24 {
+			reg = <24>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "dpll4_m6_ck";
 			clocks = <&dpll4_ck>;
-			ti,bit-shift = <24>;
 			ti,max-div = <63>;
 			ti,index-starts-at-one;
 		};
 
-		emu_src_mux_ck: clock-emu-src-mux {
+		emu_src_mux_ck: clock-emu-src-mux@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,mux-clock";
 			clock-output-names = "emu_src_mux_ck";
 			clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
 		};
 
-		pclk_fck: clock-pclk-fck {
+		pclk_fck: clock-pclk-fck@8 {
+			reg = <8>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "pclk_fck";
 			clocks = <&emu_src_ck>;
-			ti,bit-shift = <8>;
 			ti,max-div = <7>;
 			ti,index-starts-at-one;
 		};
 
-		pclkx2_fck: clock-pclkx2-fck {
+		pclkx2_fck: clock-pclkx2-fck@6 {
+			reg = <6>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "pclkx2_fck";
 			clocks = <&emu_src_ck>;
-			ti,bit-shift = <6>;
 			ti,max-div = <3>;
 			ti,index-starts-at-one;
 		};
 
-		atclk_fck: clock-atclk-fck {
+		atclk_fck: clock-atclk-fck@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "atclk_fck";
 			clocks = <&emu_src_ck>;
-			ti,bit-shift = <4>;
 			ti,max-div = <3>;
 			ti,index-starts-at-one;
 		};
 
-		traceclk_src_fck: clock-traceclk-src-fck {
+		traceclk_src_fck: clock-traceclk-src-fck@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,mux-clock";
 			clock-output-names = "traceclk_src_fck";
 			clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
-			ti,bit-shift = <2>;
 		};
 
-		traceclk_fck: clock-traceclk-fck {
+		traceclk_fck: clock-traceclk-fck@11 {
+			reg = <11>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "traceclk_fck";
 			clocks = <&traceclk_src_fck>;
-			ti,bit-shift = <11>;
 			ti,max-div = <7>;
 			ti,index-starts-at-one;
 		};
@@ -429,40 +434,41 @@
 		compatible = "ti,clksel";
 		reg = <0xd40>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		dpll3_m2_ck: clock-dpll3-m2 {
+		dpll3_m2_ck: clock-dpll3-m2@27 {
+			reg = <27>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "dpll3_m2_ck";
 			clocks = <&dpll3_ck>;
-			ti,bit-shift = <27>;
 			ti,max-div = <31>;
 			ti,index-starts-at-one;
 		};
 
-		omap_96m_fck: clock-omap-96m-fck {
+		omap_96m_fck: clock-omap-96m-fck@6 {
+			reg = <6>;
 			#clock-cells = <0>;
 			compatible = "ti,mux-clock";
 			clock-output-names = "omap_96m_fck";
 			clocks = <&cm_96m_fck>, <&sys_ck>;
-			ti,bit-shift = <6>;
 		};
 
-		omap_54m_fck: clock-omap-54m-fck {
+		omap_54m_fck: clock-omap-54m-fck@5 {
+			reg = <5>;
 			#clock-cells = <0>;
 			compatible = "ti,mux-clock";
 			clock-output-names = "omap_54m_fck";
 			clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
-			ti,bit-shift = <5>;
 		};
 
-		omap_48m_fck: clock-omap-48m-fck {
+		omap_48m_fck: clock-omap-48m-fck@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,mux-clock";
 			clock-output-names = "omap_48m_fck";
 			clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
-			ti,bit-shift = <3>;
 		};
 	};
 
@@ -471,19 +477,21 @@
 		compatible = "ti,clksel";
 		reg = <0xe40>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		dpll4_m3_ck: clock-dpll4-m3 {
+		dpll4_m3_ck: clock-dpll4-m3@8 {
+			reg = <8>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "dpll4_m3_ck";
 			clocks = <&dpll4_ck>;
-			ti,bit-shift = <8>;
 			ti,max-div = <32>;
 			ti,index-starts-at-one;
 		};
 
-		dpll4_m4_ck: clock-dpll4-m4 {
+		dpll4_m4_ck: clock-dpll4-m4@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "dpll4_m4_ck";
@@ -603,29 +611,31 @@
 		compatible = "ti,clksel";
 		reg = <0xd70>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		clkout2_src_gate_ck: clock-clkout2-src-gate {
+		clkout2_src_gate_ck: clock-clkout2-src-gate@7 {
+			reg = <7>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-no-wait-gate-clock";
 			clock-output-names = "clkout2_src_gate_ck";
 			clocks = <&core_ck>;
-			ti,bit-shift = <7>;
 		};
 
-		clkout2_src_mux_ck: clock-clkout2-src-mux {
+		clkout2_src_mux_ck: clock-clkout2-src-mux@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "clkout2_src_mux_ck";
 			clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
 		};
 
-		sys_clkout2: clock-sys-clkout2 {
+		sys_clkout2: clock-sys-clkout2@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "sys_clkout2";
 			clocks = <&clkout2_src_ck>;
-			ti,bit-shift = <3>;
 			ti,max-div = <64>;
 			ti,index-power-of-two;
 		};
@@ -666,9 +676,11 @@
 		compatible = "ti,clksel";
 		reg = <0xa40>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		l3_ick: clock-l3-ick {
+		l3_ick: clock-l3-ick@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "l3_ick";
@@ -677,30 +689,30 @@
 			ti,index-starts-at-one;
 		};
 
-		l4_ick: clock-l4-ick {
+		l4_ick: clock-l4-ick@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "l4_ick";
 			clocks = <&l3_ick>;
-			ti,bit-shift = <2>;
 			ti,max-div = <3>;
 			ti,index-starts-at-one;
 		};
 
-		gpt10_mux_fck: clock-gpt10-mux-fck {
+		gpt10_mux_fck: clock-gpt10-mux-fck@6 {
+			reg = <6>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt10_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <6>;
 		};
 
-		gpt11_mux_fck: clock-gpt11-mux-fck {
+		gpt11_mux_fck: clock-gpt11-mux-fck@7 {
+			reg = <7>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt11_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <7>;
 		};
 	};
 
@@ -709,19 +721,21 @@
 		compatible = "ti,clksel";
 		reg = <0xc40>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		rm_ick: clock-rm-ick {
+		rm_ick: clock-rm-ick@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "rm_ick";
 			clocks = <&l4_ick>;
-			ti,bit-shift = <1>;
 			ti,max-div = <3>;
 			ti,index-starts-at-one;
 		};
 
-		gpt1_mux_fck: clock-gpt1-mux-fck {
+		gpt1_mux_fck: clock-gpt1-mux-fck@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt1_mux_fck";
@@ -734,134 +748,135 @@
 		compatible = "ti,clksel";
 		reg = <0xa00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		gpt10_gate_fck: clock-gpt10-gate-fck {
+		gpt10_gate_fck: clock-gpt10-gate-fck@11 {
+			reg = <11>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt10_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <11>;
 		};
 
-		gpt11_gate_fck: clock-gpt11-gate-fck {
+		gpt11_gate_fck: clock-gpt11-gate-fck@12 {
+			reg = <12>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt11_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <12>;
 		};
 
-		mmchs2_fck: clock-mmchs2-fck {
+		mmchs2_fck: clock-mmchs2-fck@25 {
+			reg = <25>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "mmchs2_fck";
 			clocks = <&core_96m_fck>;
-			ti,bit-shift = <25>;
 		};
 
-		mmchs1_fck: clock-mmchs1-fck {
+		mmchs1_fck: clock-mmchs1-fck@24 {
+			reg = <24>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "mmchs1_fck";
 			clocks = <&core_96m_fck>;
-			ti,bit-shift = <24>;
 		};
 
-		i2c3_fck: clock-i2c3-fck {
+		i2c3_fck: clock-i2c3-fck@17 {
+			reg = <17>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "i2c3_fck";
 			clocks = <&core_96m_fck>;
-			ti,bit-shift = <17>;
 		};
 
-		i2c2_fck: clock-i2c2-fck {
+		i2c2_fck: clock-i2c2-fck@16 {
+			reg = <16>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "i2c2_fck";
 			clocks = <&core_96m_fck>;
-			ti,bit-shift = <16>;
 		};
 
-		i2c1_fck: clock-i2c1-fck {
+		i2c1_fck: clock-i2c1-fck@15 {
+			reg = <15>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "i2c1_fck";
 			clocks = <&core_96m_fck>;
-			ti,bit-shift = <15>;
 		};
 
-		mcbsp5_gate_fck: clock-mcbsp5-gate-fck {
+		mcbsp5_gate_fck: clock-mcbsp5-gate-fck@10 {
+			reg = <10>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "mcbsp5_gate_fck";
 			clocks = <&mcbsp_clks>;
-			ti,bit-shift = <10>;
 		};
 
-		mcbsp1_gate_fck: clock-mcbsp1-gate-fck {
+		mcbsp1_gate_fck: clock-mcbsp1-gate-fck@9 {
+			reg = <9>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "mcbsp1_gate_fck";
 			clocks = <&mcbsp_clks>;
-			ti,bit-shift = <9>;
 		};
 
-		mcspi4_fck: clock-mcspi4-fck {
+		mcspi4_fck: clock-mcspi4-fck@21 {
+			reg = <21>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "mcspi4_fck";
 			clocks = <&core_48m_fck>;
-			ti,bit-shift = <21>;
 		};
 
-		mcspi3_fck: clock-mcspi3-fck {
+		mcspi3_fck: clock-mcspi3-fck@20 {
+			reg = <20>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "mcspi3_fck";
 			clocks = <&core_48m_fck>;
-			ti,bit-shift = <20>;
 		};
 
-		mcspi2_fck: clock-mcspi2-fck {
+		mcspi2_fck: clock-mcspi2-fck@19 {
+			reg = <19>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "mcspi2_fck";
 			clocks = <&core_48m_fck>;
-			ti,bit-shift = <19>;
 		};
 
-		mcspi1_fck: clock-mcspi1-fck {
+		mcspi1_fck: clock-mcspi1-fck@18 {
+			reg = <18>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "mcspi1_fck";
 			clocks = <&core_48m_fck>;
-			ti,bit-shift = <18>;
 		};
 
-		uart2_fck: clock-uart2-fck {
+		uart2_fck: clock-uart2-fck@14 {
+			reg = <14>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "uart2_fck";
 			clocks = <&core_48m_fck>;
-			ti,bit-shift = <14>;
 		};
 
-		uart1_fck: clock-uart1-fck {
+		uart1_fck: clock-uart1-fck@13 {
+			reg = <13>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "uart1_fck";
 			clocks = <&core_48m_fck>;
-			ti,bit-shift = <13>;
 		};
 
-		hdq_fck: clock-hdq-fck {
+		hdq_fck: clock-hdq-fck@22 {
+			reg = <22>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "hdq_fck";
 			clocks = <&core_12m_fck>;
-			ti,bit-shift = <22>;
 		};
 	};
 
@@ -914,166 +929,167 @@
 		compatible = "ti,clksel";
 		reg = <0xa10>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		sdrc_ick: clock-sdrc-ick {
+		sdrc_ick: clock-sdrc-ick@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "sdrc_ick";
 			clocks = <&core_l3_ick>;
-			ti,bit-shift = <1>;
 		};
 
-		mmchs2_ick: clock-mmchs2-ick {
+		mmchs2_ick: clock-mmchs2-ick@25 {
+			reg = <25>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mmchs2_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <25>;
 		};
 
-		mmchs1_ick: clock-mmchs1-ick {
+		mmchs1_ick: clock-mmchs1-ick@24 {
+			reg = <24>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mmchs1_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <24>;
 		};
 
-		hdq_ick: clock-hdq-ick {
+		hdq_ick: clock-hdq-ick@22 {
+			reg = <22>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "hdq_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <22>;
 		};
 
-		mcspi4_ick: clock-mcspi4-ick {
+		mcspi4_ick: clock-mcspi4-ick@21 {
+			reg = <21>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mcspi4_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <21>;
 		};
 
-		mcspi3_ick: clock-mcspi3-ick {
+		mcspi3_ick: clock-mcspi3-ick@20 {
+			reg = <20>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mcspi3_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <20>;
 		};
 
-		mcspi2_ick: clock-mcspi2-ick {
+		mcspi2_ick: clock-mcspi2-ick@19 {
+			reg = <19>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mcspi2_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <19>;
 		};
 
-		mcspi1_ick: clock-mcspi1-ick {
+		mcspi1_ick: clock-mcspi1-ick@18 {
+			reg = <18>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mcspi1_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <18>;
 		};
 
-		i2c3_ick: clock-i2c3-ick {
+		i2c3_ick: clock-i2c3-ick@17 {
+			reg = <17>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "i2c3_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <17>;
 		};
 
-		i2c2_ick: clock-i2c2-ick {
+		i2c2_ick: clock-i2c2-ick@16 {
+			reg = <16>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "i2c2_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <16>;
 		};
 
-		i2c1_ick: clock-i2c1-ick {
+		i2c1_ick: clock-i2c1-ick@15 {
+			reg = <15>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "i2c1_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <15>;
 		};
 
-		uart2_ick: clock-uart2-ick {
+		uart2_ick: clock-uart2-ick@14 {
+			reg = <14>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "uart2_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <14>;
 		};
 
-		uart1_ick: clock-uart1-ick {
+		uart1_ick: clock-uart1-ick@13 {
+			reg = <13>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "uart1_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <13>;
 		};
 
-		gpt11_ick: clock-gpt11-ick {
+		gpt11_ick: clock-gpt11-ick@12 {
+			reg = <12>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt11_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <12>;
 		};
 
-		gpt10_ick: clock-gpt10-ick {
+		gpt10_ick: clock-gpt10-ick@11 {
+			reg = <11>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt10_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <11>;
 		};
 
-		mcbsp5_ick: clock-mcbsp5-ick {
+		mcbsp5_ick: clock-mcbsp5-ick@10 {
+			reg = <10>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mcbsp5_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <10>;
 		};
 
-		mcbsp1_ick: clock-mcbsp1-ick {
+		mcbsp1_ick: clock-mcbsp1-ick@9 {
+			reg = <9>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mcbsp1_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <9>;
 		};
 
-		omapctrl_ick: clock-omapctrl-ick {
+		omapctrl_ick: clock-omapctrl-ick@6 {
+			reg = <6>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "omapctrl_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <6>;
 		};
 
-		aes2_ick: clock-aes2-ick {
+		aes2_ick: clock-aes2-ick@28 {
+			reg = <28>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "aes2_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <28>;
 		};
 
-		sha12_ick: clock-sha12-ick {
+		sha12_ick: clock-sha12-ick@27 {
+			reg = <27>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "sha12_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <27>;
 		};
 	};
 
@@ -1136,30 +1152,31 @@
 		compatible = "ti,clksel";
 		reg = <0xc00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		gpt1_gate_fck: clock-gpt1-gate-fck {
+		gpt1_gate_fck: clock-gpt1-gate-fck@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt1_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <0>;
 		};
 
-		gpio1_dbck: clock-gpio1-dbck {
+		gpio1_dbck: clock-gpio1-dbck@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "gpio1_dbck";
 			clocks = <&wkup_32k_fck>;
-			ti,bit-shift = <3>;
 		};
 
-		wdt2_fck: clock-wdt2-fck {
+		wdt2_fck: clock-wdt2-fck@5 {
+			reg = <5>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "wdt2_fck";
 			clocks = <&wkup_32k_fck>;
-			ti,bit-shift = <5>;
 		};
 	};
 
@@ -1182,54 +1199,55 @@
 		compatible = "ti,clksel";
 		reg = <0xc10>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		wdt2_ick: clock-wdt2-ick {
+		wdt2_ick: clock-wdt2-ick@5 {
+			reg = <5>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "wdt2_ick";
 			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <5>;
 		};
 
-		wdt1_ick: clock-wdt1-ick {
+		wdt1_ick: clock-wdt1-ick@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "wdt1_ick";
 			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <4>;
 		};
 
-		gpio1_ick: clock-gpio1-ick {
+		gpio1_ick: clock-gpio1-ick@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpio1_ick";
 			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <3>;
 		};
 
-		omap_32ksync_ick: clock-omap-32ksync-ick {
+		omap_32ksync_ick: clock-omap-32ksync-ick@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "omap_32ksync_ick";
 			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <2>;
 		};
 
-		gpt12_ick: clock-gpt12-ick {
+		gpt12_ick: clock-gpt12-ick@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt12_ick";
 			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <1>;
 		};
 
-		gpt1_ick: clock-gpt1-ick {
+		gpt1_ick: clock-gpt1-ick@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt1_ick";
 			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <0>;
 		};
 	};
 
@@ -1254,150 +1272,151 @@
 		compatible = "ti,clksel";
 		reg = <0x1000>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		uart3_fck: clock-uart3-fck {
+		uart3_fck: clock-uart3-fck@11 {
+			reg = <11>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "uart3_fck";
 			clocks = <&per_48m_fck>;
-			ti,bit-shift = <11>;
 		};
 
-		gpt2_gate_fck: clock-gpt2-gate-fck {
+		gpt2_gate_fck: clock-gpt2-gate-fck@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt2_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <3>;
 		};
 
-		gpt3_gate_fck: clock-gpt3-gate-fck {
+		gpt3_gate_fck: clock-gpt3-gate-fck@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt3_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <4>;
 		};
 
-		gpt4_gate_fck: clock-gpt4-gate-fck {
+		gpt4_gate_fck: clock-gpt4-gate-fck@5 {
+			reg = <5>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt4_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <5>;
 		};
 
-		gpt5_gate_fck: clock-gpt5-gate-fck {
+		gpt5_gate_fck: clock-gpt5-gate-fck@6 {
+			reg = <6>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt5_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <6>;
 		};
 
-		gpt6_gate_fck: clock-gpt6-gate-fck {
+		gpt6_gate_fck: clock-gpt6-gate-fck@7 {
+			reg = <7>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt6_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <7>;
 		};
 
-		gpt7_gate_fck: clock-gpt7-gate-fck {
+		gpt7_gate_fck: clock-gpt7-gate-fck@8 {
+			reg = <8>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt7_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <8>;
 		};
 
-		gpt8_gate_fck: clock-gpt8-gate-fck {
+		gpt8_gate_fck: clock-gpt8-gate-fck@9 {
+			reg = <9>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt8_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <9>;
 		};
 
-		gpt9_gate_fck: clock-gpt9-gate-fck {
+		gpt9_gate_fck: clock-gpt9-gate-fck@10 {
+			reg = <10>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt9_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <10>;
 		};
 
-		gpio6_dbck: clock-gpio6-dbck {
+		gpio6_dbck: clock-gpio6-dbck@17 {
+			reg = <17>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "gpio6_dbck";
 			clocks = <&per_32k_alwon_fck>;
-			ti,bit-shift = <17>;
 		};
 
-		gpio5_dbck: clock-gpio5-dbck {
+		gpio5_dbck: clock-gpio5-dbck@16 {
+			reg = <16>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "gpio5_dbck";
 			clocks = <&per_32k_alwon_fck>;
-			ti,bit-shift = <16>;
 		};
 
-		gpio4_dbck: clock-gpio4-dbck {
+		gpio4_dbck: clock-gpio4-dbck@15 {
+			reg = <15>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "gpio4_dbck";
 			clocks = <&per_32k_alwon_fck>;
-			ti,bit-shift = <15>;
 		};
 
-		gpio3_dbck: clock-gpio3-dbck {
+		gpio3_dbck: clock-gpio3-dbck@14 {
+			reg = <14>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "gpio3_dbck";
 			clocks = <&per_32k_alwon_fck>;
-			ti,bit-shift = <14>;
 		};
 
-		gpio2_dbck: clock-gpio2-dbck {
+		gpio2_dbck: clock-gpio2-dbck@13 {
+			reg = <13>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "gpio2_dbck";
 			clocks = <&per_32k_alwon_fck>;
-			ti,bit-shift = <13>;
 		};
 
-		wdt3_fck: clock-wdt3-fck {
+		wdt3_fck: clock-wdt3-fck@12 {
+			reg = <12>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "wdt3_fck";
 			clocks = <&per_32k_alwon_fck>;
-			ti,bit-shift = <12>;
 		};
 
-		mcbsp2_gate_fck: clock-mcbsp2-gate-fck {
+		mcbsp2_gate_fck: clock-mcbsp2-gate-fck@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "mcbsp2_gate_fck";
 			clocks = <&mcbsp_clks>;
-			ti,bit-shift = <0>;
 		};
 
-		mcbsp3_gate_fck: clock-mcbsp3-gate-fck {
+		mcbsp3_gate_fck: clock-mcbsp3-gate-fck@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "mcbsp3_gate_fck";
 			clocks = <&mcbsp_clks>;
-			ti,bit-shift = <1>;
 		};
 
-		mcbsp4_gate_fck: clock-mcbsp4-gate-fck {
+		mcbsp4_gate_fck: clock-mcbsp4-gate-fck@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "mcbsp4_gate_fck";
 			clocks = <&mcbsp_clks>;
-			ti,bit-shift = <2>;
 		};
 	};
 
@@ -1406,69 +1425,71 @@
 		compatible = "ti,clksel";
 		reg = <0x1040>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		gpt2_mux_fck: clock-gpt2-mux-fck {
+		gpt2_mux_fck: clock-gpt2-mux-fck@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt2_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
 		};
 
-		gpt3_mux_fck: clock-gpt3-mux-fck {
+		gpt3_mux_fck: clock-gpt3-mux-fck@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt3_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <1>;
 		};
 
-		gpt4_mux_fck: clock-gpt4-mux-fck {
+		gpt4_mux_fck: clock-gpt4-mux-fck@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt4_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <2>;
 		};
 
-		gpt5_mux_fck: clock-gpt5-mux-fck {
+		gpt5_mux_fck: clock-gpt5-mux-fck@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt5_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <3>;
 		};
 
-		gpt6_mux_fck: clock-gpt6-mux-fck {
+		gpt6_mux_fck: clock-gpt6-mux-fck@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt6_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <4>;
 		};
 
-		gpt7_mux_fck: clock-gpt7-mux-fck {
+		gpt7_mux_fck: clock-gpt7-mux-fck@5 {
+			reg = <5>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt7_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <5>;
 		};
 
-		gpt8_mux_fck: clock-gpt8-mux-fck {
+		gpt8_mux_fck: clock-gpt8-mux-fck@6 {
+			reg = <6>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt8_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <6>;
 		};
 
-		gpt9_mux_fck: clock-gpt9-mux-fck {
+		gpt9_mux_fck: clock-gpt9-mux-fck@7 {
+			reg = <7>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt9_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <7>;
 		};
 	};
 
@@ -1541,158 +1562,159 @@
 		compatible = "ti,clksel";
 		reg = <0x1010>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		gpio6_ick: clock-gpio6-ick {
+		gpio6_ick: clock-gpio6-ick@17 {
+			reg = <17>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpio6_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <17>;
 		};
 
-		gpio5_ick: clock-gpio5-ick {
+		gpio5_ick: clock-gpio5-ick@16 {
+			reg = <16>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpio5_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <16>;
 		};
 
-		gpio4_ick: clock-gpio4-ick {
+		gpio4_ick: clock-gpio4-ick@15 {
+			reg = <15>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpio4_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <15>;
 		};
 
-		gpio3_ick: clock-gpio3-ick {
+		gpio3_ick: clock-gpio3-ick@14 {
+			reg = <14>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpio3_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <14>;
 		};
 
-		gpio2_ick: clock-gpio2-ick {
+		gpio2_ick: clock-gpio2-ick@13 {
+			reg = <13>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpio2_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <13>;
 		};
 
-		wdt3_ick: clock-wdt3-ick {
+		wdt3_ick: clock-wdt3-ick@12 {
+			reg = <12>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "wdt3_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <12>;
 		};
 
-		uart3_ick: clock-uart3-ick {
+		uart3_ick: clock-uart3-ick@11 {
+			reg = <11>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "uart3_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <11>;
 		};
 
-		uart4_ick: clock-uart4-ick {
+		uart4_ick: clock-uart4-ick@18 {
+			reg = <18>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "uart4_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <18>;
 		};
 
-		gpt9_ick: clock-gpt9-ick {
+		gpt9_ick: clock-gpt9-ick@10 {
+			reg = <10>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt9_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <10>;
 		};
 
-		gpt8_ick: clock-gpt8-ick {
+		gpt8_ick: clock-gpt8-ick@9 {
+			reg = <9>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt8_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <9>;
 		};
 
-		gpt7_ick: clock-gpt7-ick {
+		gpt7_ick: clock-gpt7-ick@8 {
+			reg = <8>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt7_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <8>;
 		};
 
-		gpt6_ick: clock-gpt6-ick {
+		gpt6_ick: clock-gpt6-ick@7 {
+			reg = <7>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt6_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <7>;
 		};
 
-		gpt5_ick: clock-gpt5-ick {
+		gpt5_ick: clock-gpt5-ick@6 {
+			reg = <6>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt5_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <6>;
 		};
 
-		gpt4_ick: clock-gpt4-ick {
+		gpt4_ick: clock-gpt4-ick@5 {
+			reg = <5>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt4_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <5>;
 		};
 
-		gpt3_ick: clock-gpt3-ick {
+		gpt3_ick: clock-gpt3-ick@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt3_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <4>;
 		};
 
-		gpt2_ick: clock-gpt2-ick {
+		gpt2_ick: clock-gpt2-ick@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt2_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <3>;
 		};
 
-		mcbsp2_ick: clock-mcbsp2-ick {
+		mcbsp2_ick: clock-mcbsp2-ick@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mcbsp2_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <0>;
 		};
 
-		mcbsp3_ick: clock-mcbsp3-ick {
+		mcbsp3_ick: clock-mcbsp3-ick@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mcbsp3_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <1>;
 		};
 
-		mcbsp4_ick: clock-mcbsp4-ick {
+		mcbsp4_ick: clock-mcbsp4-ick@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mcbsp4_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <2>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/ti/omap/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/ti/omap/omap4-cpu-thermal.dtsi
new file mode 100644
index 000000000000..d484ec1e4fd8
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-cpu-thermal.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP4/5 SoC CPU thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+cpu_thermal: cpu_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <1000>; /* milliseconds */
+
+	/*
+	 * See 44xx files for single sensor addressing, omap5 and dra7 need
+	 * also sensor ID for addressing.
+	 */
+	thermal-sensors = <&bandgap     0>;
+
+	cpu_trips: trips {
+		cpu_alert0: cpu_alert {
+			temperature = <100000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_crit: cpu_crit {
+			temperature = <125000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cpu_cooling_maps: cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device =
+				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts b/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts
index ccf03a743678..1d9000f84f1b 100644
--- a/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts
@@ -1,11 +1,20 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /dts-v1/;
 
-#include "motorola-mapphone-common.dtsi"
+#include "motorola-mapphone-xt8xx.dtsi"
 
 / {
 	model = "Motorola Droid Bionic XT875";
 	compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi0;
+	};
 };
 
 &keypad {
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts
index e833c21f1c01..cc3f3e1b65ea 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts
@@ -1,9 +1,21 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /dts-v1/;
 
-#include "motorola-mapphone-common.dtsi"
+#include "motorola-mapphone-xt8xx.dtsi"
 
 / {
+	model = "Motorola Droid 4 XT894";
+	compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi0;
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 
@@ -33,11 +45,6 @@
 	};
 };
 
-/ {
-	model = "Motorola Droid 4 XT894";
-	compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
-};
-
 &keypad {
 	keypad,num-rows = <8>;
 	keypad,num-columns = <8>;
diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/ti/omap/omap4-duovero-parlor.dts
index b294c22177cb..6d1beb453234 100644
--- a/arch/arm/boot/dts/omap4-duovero-parlor.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-duovero-parlor.dts
@@ -62,33 +62,33 @@
 			&smsc_pins
 	>;
 
-	led_pins: pinmux_led_pins {
+	led_pins: led-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3)		/* abe_dmic_din3.gpio_122 */
 		>;
 	};
 
-	button_pins: pinmux_button_pins {
+	button_pins: button-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* abe_dmic_din2.gpio_121 */
 		>;
 	};
 
-	i2c2_pins: pinmux_i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
 			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
 
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
 			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
-	smsc_pins: pinmux_smsc_pins {
+	smsc_pins: smsc-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x068, PIN_INPUT | MUX_MODE3)		/* gpmc_a20.gpio_44: IRQ */
 			OMAP4_IOPAD(0x06a, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a21.gpio_45: nReset */
@@ -96,7 +96,7 @@
 		>;
 	};
 
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+	dss_hdmi_pins: dss-hdmi-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)		/* hdmi_hpd.gpio_63 */
 			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/ti/omap/omap4-duovero.dtsi
index 805dfd40030d..b8af455b411a 100644
--- a/arch/arm/boot/dts/omap4-duovero.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-duovero.dtsi
@@ -73,14 +73,14 @@
 			&hsusbb1_pins
 	>;
 
-	twl6040_pins: pinmux_twl6040_pins {
+	twl6040_pins: twl6040-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE3)		/* usbb2_ulpitll_nxt.gpio_160 */
 			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
 		>;
 	};
 
-	mcbsp1_pins: pinmux_mcbsp1_pins {
+	mcbsp1_pins: mcbsp1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
 			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
@@ -89,7 +89,7 @@
 		>;
 	};
 
-	hsusbb1_pins: pinmux_hsusbb1_pins {
+	hsusbb1_pins: hsusbb1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
 			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
@@ -106,34 +106,34 @@
 		>;
 	};
 
-	hsusb1phy_pins: pinmux_hsusb1phy_pins {
+	hsusb1phy_pins: hsusb1phy-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x08c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_wait1.gpio_62 */
 		>;
 	};
 
-	w2cbw0015_pins: pinmux_w2cbw0015_pins {
+	w2cbw0015_pins: w2cbw0015-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
 			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
 			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
-	i2c4_pins: pinmux_i2c4_pins {
+	i2c4_pins: i2c4-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
 			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
 			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_cmd */
@@ -144,7 +144,7 @@
 		>;
 	};
 
-	mmc5_pins: pinmux_mmc5_pins {
+	mmc5_pins: mmc5-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk */
 			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc5_cmd */
diff --git a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
new file mode 100644
index 000000000000..c90f43cc2fae
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
@@ -0,0 +1,693 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 Andreas Kemnade
+ */
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include "omap4460.dtsi"
+
+/ {
+	model = "Epson Moverio BT-200";
+	compatible = "epson,embt2ws", "ti,omap4460", "ti,omap4";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1024M */
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion";
+		charge-full-design-microamp-hours = <2720000>;
+		voltage-max-design-microvolt = <4200000>;
+		voltage-min-design-microvolt = <3300000>;
+
+		constant-charge-voltage-max-microvolt = <4200000>;
+		/*
+		 * vendor kernel says max charge 1400000, input limit 900000
+		 * and charges only with dcp chargers. So it is unclear what
+		 * is really allowed. Play safe for now and restrict things
+		 * here. Maybe 900000 is just the limit of the vendor charger?
+		 */
+		constant-charge-current-max-microamp = <900000>;
+		charge-term-current-microamp = <200000>;
+	};
+
+	backlight-left {
+		compatible = "pwm-backlight";
+		pwms = <&twl_pwm 1 7812500>;
+		power-supply = <&lb_v50>;
+	};
+
+	backlight-right {
+		compatible = "pwm-backlight";
+		pwms = <&twl_pwm 0 7812500>;
+		power-supply = <&lb_v50>;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+
+		key-lock {
+			label = "Lock";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_ROTATE_LOCK>; /* SW_TOUCHPAD_LOCK */
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	cb_v18: regulator-cb-v18 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&cb_v18_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "cb_v18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cb_v33: regulator-cb-v33 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&cb_v33_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "cb_v33";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	regulator-cb-v50 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&cb_v50_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "cb_v50";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	lb_v50: regulator-lb-v50 {
+		/* required for many things at the head (probably indirectly) */
+		pinctrl-names = "default";
+		pinctrl-0 = <&lb_v50_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "lb_v50";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wl12xx_pwrseq: wl12xx-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&twl 1>;
+		clock-names = "ext_clock";
+	};
+
+       /* regulator for wl12xx on sdio2 */
+	wl12xx_vmmc: wl12xx-vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_hog_pins &gpio1wk_hog_pins>;
+
+	lb-reset-hog {
+		gpio-hog;
+		gpios = <9 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "lb_reset";
+	};
+
+	power-en-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "power_en";
+	};
+
+	/*
+	 * Name taken from vendor kernel but no evidence of actual usage found
+	 * nor what it really controls.
+	 */
+	panel-power-en-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "panel_power_en";
+	};
+
+	/*
+	 * These two are exported to sysfs in vendor kernel, usage unknown,
+	 * backlight state seems unrelated to these.
+	 */
+	blc-r-hog {
+		gpio-hog;
+		gpios = <17 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "blc_r";
+	};
+
+	blc-l-hog {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "blc_l";
+	};
+
+	high-hog {
+		gpio-hog;
+		gpios = <15 GPIO_ACTIVE_HIGH /* maybe dsi to dpi chip reset? */
+			 21 GPIO_ACTIVE_HIGH
+			 26 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "unknown-high";
+	};
+
+	low-hog {
+		gpio-hog;
+		gpios = <18 GPIO_ACTIVE_HIGH
+			 19 GPIO_ACTIVE_HIGH
+			 20 GPIO_ACTIVE_HIGH
+			 22 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "unknown-low";
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	twl: pmic@48 {
+		compatible = "ti,twl6032";
+		reg = <0x48>;
+		#clock-cells = <1>;
+		/* IRQ# = 7 */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		system-power-controller;
+
+		charger {
+			compatible = "ti,twl6032-charger", "ti,twl6030-charger";
+			interrupts = <2>, <5>;
+			io-channels = <&gpadc 10>;
+			io-channel-names = "vusb";
+			monitored-battery = <&battery>;
+		};
+
+		rtc {
+			compatible = "ti,twl4030-rtc";
+			interrupts = <11>;
+		};
+
+		ldo2: regulator-ldo2 {
+			compatible = "ti,twl6032-ldo2";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		ldo4: regulator-ldo4 {
+			compatible = "ti,twl6032-ldo4";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		ldo3: regulator-ldo3 {
+			compatible = "ti,twl6032-ldo3";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		ldo5: regulator-ldo5 {
+			compatible = "ti,twl6032-ldo5";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <3000000>;
+			ti,retain-on-reset;
+		};
+
+		ldo1: regulator-ldo1 {
+			compatible = "ti,twl6032-ldo1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2500000>;
+		};
+
+		ldo7: regulator-ldo7 {
+			compatible = "ti,twl6032-ldo7";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		ldoln: regulator-ldoln {
+			compatible = "ti,twl6032-ldoln";
+			regulator-always-on;
+		};
+
+		ldo6: regulator-ldo6 {
+			compatible = "ti,twl6032-ldo6";
+			regulator-always-on;
+		};
+
+		ldousb: regulator-ldousb {
+			compatible = "ti,twl6032-ldousb";
+			regulator-always-on;
+		};
+
+		vio: regulator-vio {
+			compatible = "ti,twl6032-vio";
+			regulator-always-on;
+		};
+
+		twl_usb_comparator: usb-comparator {
+			compatible = "ti,twl6030-usb";
+			interrupts = <4>, <10>;
+		};
+
+		twl_pwm: pwm {
+			/* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
+			compatible = "ti,twl6030-pwm";
+			#pwm-cells = <2>;
+		};
+
+		twl_pwmled: pwmled {
+			/* provides one PWM (id 0 for Charging indicator LED) */
+			compatible = "ti,twl6030-pwmled";
+			#pwm-cells = <2>;
+		};
+
+		gpadc: gpadc {
+			compatible = "ti,twl6032-gpadc";
+			interrupts = <3>;
+			#io-channel-cells = <1>;
+		};
+
+	};
+};
+
+#include "twl6030_omap4.dtsi"
+
+&twl_usb_comparator {
+	usb-supply = <&ldousb>;
+};
+
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <200000>;
+
+	/* is sometimes not available, research needed */
+	gpio_head: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	/*
+	 * camera chip at 0x3c, available if <&gpio_head 1> high
+	 * and <&gpio_head 5> low
+	 */
+
+	/* at head/glasses */
+	mpu9150h: imu@68 {
+		compatible = "invensense,mpu9150";
+		reg = <0x68>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mpu9150h_pins>;
+		interrupt-parent = <&gpio2>;
+		interrupt = <19 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <100000>;
+
+	led-controller@66 {
+		compatible = "rohm,bd2606mvv";
+		reg = <0x66>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led@4 {
+			reg = <4>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	clock-frequency = <360000>;
+
+	/* TODO: KXTI9 at 0xf */
+
+	tlv320aic3x: codec@18 {
+		compatible = "ti,tlv320aic3x";
+		reg = <0x18>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tlv320aic3x_pins>;
+		#sound-dai-cells = <0>;
+
+		reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	};
+
+	mpu9150: imu@68 {
+		compatible = "invensense,mpu9150";
+		reg = <0x68>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mpu9150_pins>;
+		interrupt-parent = <&gpio2>;
+		interrupt = <7 IRQ_TYPE_LEVEL_HIGH>;
+		vddio-supply = <&cb_v18>;
+		vdd-supply = <&cb_v33>;
+		invensense,level-shifter;
+	};
+};
+
+&keypad {
+	pinctrl-names = "default";
+	pinctrl-0 = <&keypad_pins>;
+	keypad,num-rows = <2>;
+	keypad,num-columns = <3>;
+	linux,keymap = <MATRIX_KEY(0, 0, KEY_MENU)
+			MATRIX_KEY(0, 1, KEY_HOME)
+			MATRIX_KEY(0, 2, KEY_BACK)
+			MATRIX_KEY(1, 0, KEY_ESC)
+			MATRIX_KEY(1, 1, KEY_VOLUMEDOWN)
+			MATRIX_KEY(1, 2, KEY_VOLUMEUP)>;
+	linux,input-no-autorepeat;
+};
+
+&mcbsp2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
+};
+
+
+&mmc1 {
+	/* sdcard */
+	vmmc-supply = <&ldo5>;
+	broken-cd;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	/* emmc */
+	vmmc-supply = <&ldo2>;
+	bus-width = <8>;
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wl12xx_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	mmc-pwrseq = <&wl12xx_pwrseq>;
+	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0x12e>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1283";
+		reg = <2>;
+		interrupts-extended = <&gpio1 23 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "irq";
+		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "disabled";
+};
+
+&omap4_pmx_core {
+	bt_pins: pinmux-bt-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE3) /* gpio25 */
+		>;
+	};
+
+	cb_v18_pins: pinmux-cb-v18-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE3) /* gpio28 */
+		>;
+	};
+
+	cb_v33_pins: pinmux-cb-v33-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE3) /* gpio190 */
+		>;
+	};
+
+	cb_v50_pins: pinmux-cb-v50-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE3) /* gpio191 */
+		>;
+	};
+
+	gpio_keys_pins: pinmux-gpio-key-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x56, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio35 */
+		>;
+	};
+
+	gpio1_hog_pins: pinmux-gpio1-hog-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE3) /* gpio14 */
+			OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE3) /* gpio16 */
+			OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE3) /* gpio17 */
+
+			OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE3) /* gpio15 */
+			OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE3) /* gpio18 */
+			OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE3) /* gpio19 */
+			OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE3) /* gpio20 */
+			OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE3) /* gpio21 */
+			OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE3) /* gpio22 */
+			OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE3) /* gpio26 */
+		>;
+	};
+
+	i2c1_pins: pinmux-i2c1-pins {
+		pinctrl-single,pins = <
+			   OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			   OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux-i2c2-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x126, PIN_INPUT | MUX_MODE0)	/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux-i2c3-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12a, PIN_INPUT | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux-i2c4-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12e, PIN_INPUT | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	keypad_pins: pinmux-keypad-pins {
+		pinctrl-single,pins = <
+			/* kpd_row0 */
+			OMAP4_IOPAD(0x0050, PIN_INPUT_PULLUP | MUX_MODE1)
+			/* kpd_row1 */
+			OMAP4_IOPAD(0x0052, PIN_INPUT_PULLUP | MUX_MODE1)
+			/* kpd_row2 */
+			OMAP4_IOPAD(0x0054, PIN_INPUT_PULLUP | MUX_MODE1)
+			/* kpd_col0 */
+			OMAP4_IOPAD(0x0058, PIN_OUTPUT | MUX_MODE1)
+			/* kpd_col1 */
+			OMAP4_IOPAD(0x005a, PIN_OUTPUT | MUX_MODE1)
+			/* kpd_col2 */
+			OMAP4_IOPAD(0x005c, PIN_OUTPUT | MUX_MODE1)
+		>;
+	};
+
+	lb_v50_pins: pinmux-lb-v50-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE3) /* gpio27 */
+		>;
+	};
+
+	mcbsp2_pins: pinmux-mcbsp2-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)       /* abe_mcbsp2_clkx */
+			OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0)       /* abe_mcbsp2_dr */
+			OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0)      /* abe_mcbsp2_dx */
+			OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)       /* abe_mcbsp2_fsx */
+		>;
+	};
+
+	mpu9150_pins: pinmux-mpu9150-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x5e, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	mpu9150h_pins: pinmux-mpu9150h-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x76, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	tlv320aic3x_pins: pinmux-tlv320aic3x-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x7e, PIN_OUTPUT | MUX_MODE3)
+		>;
+	};
+
+	uart2_pins: pinmux-uart2-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
+			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)	 /* uart2_rts.uart2_rts */
+			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
+			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)	 /* uart2_tx.uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux-uart3-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)  /* uart3_rx_irrx */
+			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx */
+		>;
+	};
+
+	usb_otg_hs_pins: pinmux-usb-otg-hs-pins {
+		 pinctrl-single,pins = <
+			 OMAP4_IOPAD(0x194, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usba0_otg_ce */
+			 OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)	     /* usba0_otg_dp */
+			 OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)	     /* usba0_otg_dm */
+		 >;
+	};
+
+	wl12xx_pins: pinmux-wl12xx-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x1c6, PIN_INPUT | MUX_MODE3) /* gpio_23 / IRQ */
+			OMAP4_IOPAD(0x16c, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_dat2 */
+			OMAP4_IOPAD(0x16e, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_dat1 */
+			OMAP4_IOPAD(0x170, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_dat0 */
+			OMAP4_IOPAD(0x172, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_dat3 */
+			OMAP4_IOPAD(0x174, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_cmd */
+			OMAP4_IOPAD(0x176, PIN_INPUT_PULLUP | MUX_MODE2) /* sdmmc3_clk */
+		>;
+	};
+
+	wl12xx_gpio: pinmux-wl12xx-gpio-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE3)  /* gpio_24 / WLAN_EN */
+		>;
+	};
+};
+
+&omap4_pmx_wkup {
+	gpio1wk_hog_pins: pinmux-gpio1wk-hog-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x68, PIN_INPUT_PULLDOWN | MUX_MODE3) /* gpio9 */
+			OMAP4_IOPAD(0x6a, PIN_INPUT | MUX_MODE3) /* gpio10 */
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins &bt_pins>;
+	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART2_RX>;
+
+	bluetooth-gnss {
+		compatible = "ti,wl1283-st";
+		enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;	/* GPIO_25 */
+		clocks = <&twl 1>;
+		clock-names = "ext_clock";
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART3_RX>;
+};
+
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_otg_hs_pins>;
+
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+&usbhshost {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap4-kc1.dts b/arch/arm/boot/dts/ti/omap/omap4-kc1.dts
index e59d17b25a1d..df874d5f5327 100644
--- a/arch/arm/boot/dts/omap4-kc1.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-kc1.dts
@@ -35,42 +35,42 @@
 &omap4_pmx_core {
 	pinctrl-names = "default";
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx */
 			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx */
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
 			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
-	i2c2_pins: pinmux_i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
 			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
 
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
 			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
-	i2c4_pins: pinmux_i2c4_pins {
+	i2c4_pins: i2c4-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
 			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
 
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x040, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat0 */
 			OMAP4_IOPAD(0x042, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat1 */
@@ -85,7 +85,7 @@
 		>;
 	};
 
-	usb_otg_hs_pins: pinmux_usb_otg_hs_pins {
+	usb_otg_hs_pins: usb-otg-hs-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x194, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* usba0_otg_ce */
 			OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)		/* usba0_otg_dp */
@@ -112,11 +112,7 @@
 		reg = <0x48>;
 		/* IRQ# = 7 */
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
-
-		twl_power: power {
-			compatible = "ti,twl6030-power";
-			ti,system-power-controller;
-		};
+		system-power-controller;
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/ti/omap/omap4-l4-abe.dtsi
index 7ae8b620515c..59f546a278f8 100644
--- a/arch/arm/boot/dts/omap4-l4-abe.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-l4-abe.dtsi
@@ -109,6 +109,8 @@
 				reg = <0x0 0xff>, /* MPU private access */
 				      <0x49022000 0xff>; /* L3 Interconnect */
 				reg-names = "mpu", "dma";
+				clocks = <&abe_clkctrl OMAP4_MCBSP1_CLKCTRL 24>;
+				clock-names = "fck";
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "common";
 				ti,buffer-size = <128>;
@@ -142,6 +144,8 @@
 				reg = <0x0 0xff>, /* MPU private access */
 				      <0x49024000 0xff>; /* L3 Interconnect */
 				reg-names = "mpu", "dma";
+				clocks = <&abe_clkctrl OMAP4_MCBSP2_CLKCTRL 24>;
+				clock-names = "fck";
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "common";
 				ti,buffer-size = <128>;
@@ -175,6 +179,8 @@
 				reg = <0x0 0xff>, /* MPU private access */
 				      <0x49026000 0xff>; /* L3 Interconnect */
 				reg-names = "mpu", "dma";
+				clocks = <&abe_clkctrl OMAP4_MCBSP3_CLKCTRL 24>;
+				clock-names = "fck";
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "common";
 				ti,buffer-size = <128>;
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi
index 46b8f9efd413..4ee53dfb71b4 100644
--- a/arch/arm/boot/dts/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi
@@ -302,14 +302,14 @@
 					      "refclk_60m_ext_p1",
 					      "refclk_60m_ext_p2";
 
-				usbhsohci: ohci@800 {
+				usbhsohci: usb@800 {
 					compatible = "ti,ohci-omap3";
 					reg = <0x800 0x400>;
 					interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 					remote-wakeup-connected;
 				};
 
-				usbhsehci: ehci@c00 {
+				usbhsehci: usb@c00 {
 					compatible = "ti,ehci-omap";
 					reg = <0xc00 0x400>;
 					interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -1414,7 +1414,7 @@
 			uart3: serial@0 {
 				compatible = "ti,omap4-uart";
 				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
 			};
 		};
@@ -1765,7 +1765,7 @@
 			uart1: serial@0 {
 				compatible = "ti,omap4-uart";
 				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
 			};
 		};
@@ -1794,7 +1794,7 @@
 			uart2: serial@0 {
 				compatible = "ti,omap4-uart";
 				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
 			};
 		};
@@ -1823,7 +1823,7 @@
 			uart4: serial@0 {
 				compatible = "ti,omap4-uart";
 				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
 			};
 		};
@@ -2043,6 +2043,8 @@
 				compatible = "ti,omap4-mcbsp";
 				reg = <0x0 0xff>; /* L4 Interconnect */
 				reg-names = "mpu";
+				clocks = <&l4_per_clkctrl OMAP4_MCBSP4_CLKCTRL 24>;
+				clock-names = "fck";
 				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "common";
 				ti,buffer-size = <128>;
diff --git a/arch/arm/boot/dts/omap4-mcpdm.dtsi b/arch/arm/boot/dts/ti/omap/omap4-mcpdm.dtsi
index 915a9b31a33b..03ade47431fb 100644
--- a/arch/arm/boot/dts/omap4-mcpdm.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-mcpdm.dtsi
@@ -7,7 +7,7 @@
  */
 
 &omap4_pmx_core {
-	mcpdm_pins: pinmux_mcpdm_pins {
+	mcpdm_pins: mcpdm-pins {
 		pinctrl-single,pins = <
 		/* 0x4a100106 abe_pdm_ul_data.abe_pdm_ul_data ag25 */
 		OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)
diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/ti/omap/omap4-panda-a4.dts
index 8fd076e5d1b0..4b8bfd0188ad 100644
--- a/arch/arm/boot/dts/omap4-panda-a4.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-panda-a4.dts
@@ -7,6 +7,11 @@
 #include "omap443x.dtsi"
 #include "omap4-panda-common.dtsi"
 
+/ {
+	model = "TI OMAP4 PandaBoard (A4)";
+	compatible = "ti,omap4-panda-a4", "ti,omap4-panda", "ti,omap4430", "ti,omap4";
+};
+
 /* Pandaboard Rev A4+ have external pullups on SCL & SDA */
 &dss_hdmi_pins {
 	pinctrl-single,pins = <
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/ti/omap/omap4-panda-common.dtsi
index 518652a599bd..05c871d31d7b 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-panda-common.dtsi
@@ -49,13 +49,13 @@
 			&led_wkgpio_pins
 		>;
 
-		heartbeat {
+		led-heartbeat {
 			label = "pandaboard::status1";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		mmc {
+		led-mmc {
 			label = "pandaboard::status2";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
@@ -130,6 +130,12 @@
 		clock-frequency = <19200000>;
 	};
 
+	wl12xx_pwrseq: wl12xx-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&twl 0>;
+		clock-names = "ext_clock";
+	};
+
 	/* regulator for wl12xx on sdio5 */
 	wl12xx_vmmc: wl12xx_vmmc {
 		pinctrl-names = "default";
@@ -237,14 +243,14 @@
 			&hsusbb1_pins
 	>;
 
-	twl6040_pins: pinmux_twl6040_pins {
+	twl6040_pins: twl6040-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
 			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
 		>;
 	};
 
-	mcbsp1_pins: pinmux_mcbsp1_pins {
+	mcbsp1_pins: mcbsp1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
 			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
@@ -253,7 +259,7 @@
 		>;
 	};
 
-	dss_dpi_pins: pinmux_dss_dpi_pins {
+	dss_dpi_pins: dss-dpi-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
 			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
@@ -288,13 +294,13 @@
 		>;
 	};
 
-	tfp410_pins: pinmux_tfp410_pins {
+	tfp410_pins: tfp410-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
 		>;
 	};
 
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+	dss_hdmi_pins: dss-hdmi-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
 			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
@@ -302,7 +308,7 @@
 		>;
 	};
 
-	tpd12s015_pins: pinmux_tpd12s015_pins {
+	tpd12s015_pins: tpd12s015-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
 			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
@@ -310,7 +316,7 @@
 		>;
 	};
 
-	hsusbb1_pins: pinmux_hsusbb1_pins {
+	hsusbb1_pins: hsusbb1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
 			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
@@ -327,28 +333,28 @@
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
 			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
-	i2c2_pins: pinmux_i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
 			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
 
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
 			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
-	i2c4_pins: pinmux_i2c4_pins {
+	i2c4_pins: i2c4-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
 			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
@@ -359,17 +365,15 @@
 	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
 	 * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
 	 */
-	wl12xx_gpio: pinmux_wl12xx_gpio {
+	wl12xx_gpio: wl12xx-gpio-pins {
 		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
-			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
+			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 - WLAN_EN */
 			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
-			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
 		>;
 	};
 
 	/* wl12xx GPIO inputs and SDIO pins */
-	wl12xx_pins: pinmux_wl12xx_pins {
+	wl12xx_pins: wl12xx-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
 			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
@@ -382,15 +386,31 @@
 		>;
 	};
 
-	button_pins: pinmux_button_pins {
+	button_pins: button-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpio_121 */
 		>;
 	};
+
+	bt_pins: bt-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)	  /* gpmc_a22.gpio_46 - BTEN */
+			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 - BTWAKEUP */
+		>;
+	};
+
+	uart2_pins: uart2-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)  /* uart2_cts.uart2_cts - HCI */
+			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)	  /* uart2_rts.uart2_rts */
+			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)  /* uart2_rx.uart2_rx */
+			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)	  /* uart2_tx.uart2_tx */
+		>;
+	};
 };
 
 &omap4_pmx_wkup {
-	led_wkgpio_pins: pinmux_leds_wkpins {
+	led_wkgpio_pins: leds-wkpins-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
 			OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
@@ -408,6 +428,8 @@
 		reg = <0x48>;
 		/* IRQ# = 7 */
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+		#clock-cells = <1>;
+		system-power-controller;
 	};
 
 	twl6040: twl@4b {
@@ -487,6 +509,7 @@
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+	mmc-pwrseq = <&wl12xx_pwrseq>;
 
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -522,8 +545,19 @@
 };
 
 &uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
 	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core OMAP4_UART2_RX>;
+
+	bluetooth {
+		compatible = "ti,wl1271-st";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins>;
+		enable-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;	/* GPIO_46 */
+		clocks = <&twl 0>;
+		clock-names = "ext_clock";
+	};
 };
 
 &uart3 {
diff --git a/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts b/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts
new file mode 100644
index 000000000000..a933fe560834
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap4460.dtsi"
+#include "omap4-panda-common.dtsi"
+
+/ {
+	model = "TI OMAP4 PandaBoard-ES";
+	compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4";
+};
+
+/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
+&sound {
+	ti,model = "PandaBoardES";
+
+	/* Audio routing */
+	ti,audio-routing =
+		"Headset Stereophone", "HSOL",
+		"Headset Stereophone", "HSOR",
+		"Ext Spk", "HFL",
+		"Ext Spk", "HFR",
+		"Line Out", "AUXL",
+		"Line Out", "AUXR",
+		"AFML", "Line In",
+		"AFMR", "Line In";
+};
+
+/* PandaboardES has external pullups on SCL & SDA */
+&dss_hdmi_pins {
+	pinctrl-single,pins = <
+		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
+		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
+		>;
+};
+
+&omap4_pmx_core {
+	led_gpio_pins: gpio-led-pmx-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
+		>;
+	};
+
+	button_pins: button-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
+		>;
+	};
+};
+
+&led_wkgpio_pins {
+	pinctrl-single,pins = <
+		OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
+	>;
+};
+
+&leds {
+	pinctrl-0 = <
+		&led_gpio_pins
+		&led_wkgpio_pins
+	>;
+
+	led-heartbeat {
+		gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+	};
+	led-mmc {
+		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gpio_keys {
+	buttonS2 {
+		gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* gpio_113 */
+	};
+};
+
+&gpio1_target {
+	 ti,no-reset-on-init;
+};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/ti/omap/omap4-panda.dts
index 529d5bcceaaf..529d5bcceaaf 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-panda.dts
diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/ti/omap/omap4-sdp-es23plus.dts
index 869f6279b5be..869f6279b5be 100644
--- a/arch/arm/boot/dts/omap4-sdp-es23plus.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-sdp-es23plus.dts
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/ti/omap/omap4-sdp.dts
index 9e976140f34a..b550105585a1 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-sdp.dts
@@ -214,7 +214,7 @@
 			&tpd12s015_pins
 	>;
 
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
 			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
@@ -223,7 +223,7 @@
 		>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
 			OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
@@ -232,21 +232,21 @@
 		>;
 	};
 
-	uart4_pins: pinmux_uart4_pins {
+	uart4_pins: uart4-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)		/* uart4_rx.uart4_rx */
 			OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)		/* uart4_tx.uart4_tx */
 		>;
 	};
 
-	twl6040_pins: pinmux_twl6040_pins {
+	twl6040_pins: twl6040-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
 			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
 		>;
 	};
 
-	dmic_pins: pinmux_dmic_pins {
+	dmic_pins: dmic-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0)		/* abe_dmic_clk1.abe_dmic_clk1 */
 			OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din1.abe_dmic_din1 */
@@ -255,7 +255,7 @@
 		>;
 	};
 
-	mcbsp1_pins: pinmux_mcbsp1_pins {
+	mcbsp1_pins: mcbsp1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
 			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
@@ -264,7 +264,7 @@
 		>;
 	};
 
-	mcbsp2_pins: pinmux_mcbsp2_pins {
+	mcbsp2_pins: mcbsp2-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
 			OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dr.abe_mcbsp2_dr */
@@ -273,7 +273,7 @@
 		>;
 	};
 
-	mcspi1_pins: pinmux_mcspi1_pins {
+	mcspi1_pins: mcspi1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
 			OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
@@ -282,7 +282,7 @@
 		>;
 	};
 
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+	dss_hdmi_pins: dss-hdmi-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
 			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
@@ -290,7 +290,7 @@
 		>;
 	};
 
-	tpd12s015_pins: pinmux_tpd12s015_pins {
+	tpd12s015_pins: tpd12s015-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
 			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
@@ -298,28 +298,28 @@
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
 			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
-	i2c2_pins: pinmux_i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
 			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
 
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
 			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
-	i2c4_pins: pinmux_i2c4_pins {
+	i2c4_pins: i2c4-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
 			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
@@ -327,14 +327,14 @@
 	};
 
 	/* wl12xx GPIO output for WLAN_EN */
-	wl12xx_gpio: pinmux_wl12xx_gpio {
+	wl12xx_gpio: wl12xx-gpio-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
 		>;
 	};
 
 	/* wl12xx GPIO inputs and SDIO pins */
-	wl12xx_pins: pinmux_wl12xx_pins {
+	wl12xx_pins: wl12xx-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
 			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
@@ -347,13 +347,13 @@
 	};
 
 	/* gpio_48 for ENET_ENABLE */
-	enet_enable_gpio: pinmux_enet_enable_gpio {
+	enet_enable_gpio: enet-enable-gpio-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* gpmc_a24.gpio_48 */
 		>;
 	};
 
-	ks8851_pins: pinmux_ks8851_pins {
+	ks8851_pins: ks8851-pins {
 		pinctrl-single,pins = <
 			/* ENET_INT */
 			OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ad10.gpio_34 */
@@ -439,7 +439,7 @@
 
 	/*
 	 * Ambient Light Sensor
-	 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
+	 * https://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf (defunct)
 	 */
 	bh1780@29 {
 		compatible = "rohm,bh1780";
@@ -467,7 +467,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcspi1_pins>;
 
-	eth@0 {
+	ethernet@0 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ks8851_pins>;
 
diff --git a/arch/arm/boot/dts/omap4-var-dvk-om44.dts b/arch/arm/boot/dts/ti/omap/omap4-var-dvk-om44.dts
index 84fd17fb0822..84fd17fb0822 100644
--- a/arch/arm/boot/dts/omap4-var-dvk-om44.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-var-dvk-om44.dts
diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi
index 458cb53dd3d1..80e89a2f8be1 100644
--- a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi
@@ -60,7 +60,7 @@
 };
 
 &omap4_pmx_core {
-	uart1_pins: pinmux_uart1_pins {
+	uart1_pins: uart1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi1_cs2.uart1_cts */
 			OMAP4_IOPAD(0x13e, PIN_OUTPUT | MUX_MODE1)		/* mcspi1_cs3.uart1_rts */
@@ -69,7 +69,7 @@
 		>;
 	};
 
-	mcspi1_pins: pinmux_mcspi1_pins {
+	mcspi1_pins: mcspi1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
 			OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
@@ -78,13 +78,13 @@
 		>;
 	};
 
-	mcasp_pins: pinmux_mcsasp_pins {
+	mcasp_pins: mcsasp-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0f8, PIN_OUTPUT | MUX_MODE2)		/*  mcbsp2_dr.abe_mcasp_axr */
 		>;
 	};
 
-	dss_dpi_pins: pinmux_dss_dpi_pins {
+	dss_dpi_pins: dss-dpi-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data23 */
 			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data22 */
@@ -117,7 +117,7 @@
 		>;
 	};
 
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+	dss_hdmi_pins: dss-hdmi-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
 			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
@@ -125,14 +125,14 @@
 		>;
 	};
 
-	i2c4_pins: pinmux_i2c4_pins {
+	i2c4_pins: i2c4-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
 			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
 
-	mmc5_pins: pinmux_mmc5_pins {
+	mmc5_pins: mmc5-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE3)		/* abe_mcbsp2_clkx.gpio_110 */
 			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
@@ -144,32 +144,32 @@
 		>;
 	};
 
-	gpio_led_pins: pinmux_gpio_led_pins {
+	gpio_led_pins: gpio-led-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x17e, PIN_OUTPUT | MUX_MODE3)		/* kpd_col4.gpio_172 */
 			OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)		/* kpd_col5.gpio_173 */
 		>;
 	};
 
-	gpio_key_pins: pinmux_gpio_key_pins {
+	gpio_key_pins: gpio-key-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x1a2, PIN_INPUT | MUX_MODE3)		/* sys_boot0.gpio_184 */
 		>;
 	};
 
-	ks8851_irq_pins: pinmux_ks8851_irq_pins {
+	ks8851_irq_pins: ks8851-irq-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x17c, PIN_INPUT_PULLUP | MUX_MODE3)	/* kpd_col3.gpio_171 */
 		>;
 	};
 
-	hdmi_hpd_pins: pinmux_hdmi_hpd_pins {
+	hdmi_hpd_pins: hdmi-hpd-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
 		>;
 	};
 
-	backlight_pins: pinmux_backlight_pins {
+	backlight_pins: backlight-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3)		/* abe_dmic_din3.gpio_122 */
 		>;
@@ -194,7 +194,7 @@
 	pinctrl-0 = <&mcspi1_pins>;
 	status = "okay";
 
-	eth@0 {
+	ethernet@0 {
 		compatible = "ks8851";
 		pinctrl-names = "default";
 		pinctrl-0 = <&ks8851_irq_pins>;
diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/ti/omap/omap4-var-som-om44-wlan.dtsi
index d0032213101e..de779d2d7c3e 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-var-som-om44-wlan.dtsi
@@ -19,7 +19,7 @@
 };
 
 &omap4_pmx_core {
-	uart2_pins: pinmux_uart2_pins {
+	uart2_pins: uart2-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
 			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
@@ -28,7 +28,7 @@
 		>;
 	};
 
-	wl12xx_ctrl_pins: pinmux_wl12xx_ctrl_pins {
+	wl12xx_ctrl_pins: wl12xx-ctrl-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x062, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a17.gpio_41 (WLAN_IRQ) */
 			OMAP4_IOPAD(0x064, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a18.gpio_42 (BT_EN) */
@@ -36,7 +36,7 @@
 		>;
 	};
 
-	mmc4_pins: pinmux_mmc4_pins {
+	mmc4_pins: mmc4-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_clk.sdmmc4_clk */
 			OMAP4_IOPAD(0x156, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_simo.sdmmc4_cmd */
diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/ti/omap/omap4-var-som-om44.dtsi
index 334cbbaa5b8b..37d56b3010cf 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-var-som-om44.dtsi
@@ -65,21 +65,21 @@
 			&hsusbb1_pins
 	>;
 
-	twl6040_pins: pinmux_twl6040_pins {
+	twl6040_pins: twl6040-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x19c, PIN_OUTPUT | MUX_MODE3)		/* fref_clk2_out.gpio_182 */
 			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
 		>;
 	};
 
-	tsc2004_pins: pinmux_tsc2004_pins {
+	tsc2004_pins: tsc2004-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs4.gpio_101 (irq) */
 			OMAP4_IOPAD(0x092, PIN_OUTPUT | MUX_MODE3)		/* gpmc_ncs5.gpio_102 (rst) */
 		>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
 			OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
@@ -88,7 +88,7 @@
 		>;
 	};
 
-	hsusbb1_pins: pinmux_hsusbb1_pins {
+	hsusbb1_pins: hsusbb1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
 			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
@@ -105,27 +105,27 @@
 		>;
 	};
 
-	hsusbb1_phy_rst_pins: pinmux_hsusbb1_phy_rst_pins {
+	hsusbb1_phy_rst_pins: hsusbb1-phy-rst-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x18c, PIN_OUTPUT | MUX_MODE3)		/* kpd_row2.gpio_177 */
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
 			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
-	i2c3_pins: pinmux_i2c3_pins {
+	i2c3_pins: i2c3-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
 			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
 			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
@@ -144,19 +144,19 @@
 		&lan7500_rst_pins
 	>;
 
-	hsusbb1_phy_clk_pins: pinmux_hsusbb1_phy_clk_pins {
+	hsusbb1_phy_clk_pins: hsusbb1-phy-clk-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x058, PIN_OUTPUT | MUX_MODE0)	/* fref_clk3_out */
 		>;
 	};
 
-	hsusbb1_hub_rst_pins: pinmux_hsusbb1_hub_rst_pins {
+	hsusbb1_hub_rst_pins: hsusbb1-hub-rst-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x042, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk1 */
 		>;
 	};
 
-	lan7500_rst_pins: pinmux_lan7500_rst_pins {
+	lan7500_rst_pins: lan7500-rst-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x040, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk0 */
 		>;
diff --git a/arch/arm/boot/dts/omap4-var-stk-om44.dts b/arch/arm/boot/dts/ti/omap/omap4-var-stk-om44.dts
index 656fb29c2a15..656fb29c2a15 100644
--- a/arch/arm/boot/dts/omap4-var-stk-om44.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-var-stk-om44.dts
diff --git a/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts
new file mode 100644
index 000000000000..762934e2d075
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-mz607-mz617.dtsi"
+
+/ {
+	model = "Motorola Xyboard MZ609";
+	compatible = "motorola,xyboard-mz609", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display1 = &hdmi0;
+	};
+
+	backlight: backlight {
+		compatible = "led-backlight";
+
+		leds = <&backlight_led>;
+		brightness-levels = <31 63 95 127 159 191 223 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&i2c1 {
+	led-controller@38 {
+		compatible = "ti,lm3532";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x38>;
+
+		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+
+		ramp-up-us = <1024>;
+		ramp-down-us = <8193>;
+
+		backlight_led: led@0 {
+			reg = <0>;
+			led-sources = <2>;
+			ti,led-mode = <0>;
+			label = ":backlight";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts
new file mode 100644
index 000000000000..b9caea3b7f9d
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-mz607-mz617.dtsi"
+
+/ {
+	model = "Motorola Xyboard MZ617";
+	compatible = "motorola,xyboard-mz617", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display1 = &hdmi0;
+	};
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/ti/omap/omap4.dtsi
index 2bbff9032be3..559b2bfe4ca7 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4.dtsi
@@ -501,10 +501,11 @@
 			#size-cells = <1>;
 			ranges = <0 0x56000000 0x2000000>;
 
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
+			gpu@0 {
+				compatible = "ti,omap4430-gpu", "img,powervr-sgx540";
+				reg = <0x0 0x2000000>; /* 32MB */
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		/*
diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap443x-clocks.dtsi
index 581e088231b5..581e088231b5 100644
--- a/arch/arm/boot/dts/omap443x-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap443x-clocks.dtsi
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/ti/omap/omap443x.dtsi
index 238aceb799f8..2104170fe2cd 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap443x.dtsi
@@ -69,6 +69,7 @@
 };
 
 &cpu_thermal {
+	thermal-sensors = <&bandgap>;
 	coefficients = <0 20000>;
 };
 
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/ti/omap/omap4460.dtsi
index 1b27a862ae81..a6764750d447 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4460.dtsi
@@ -79,6 +79,7 @@
 };
 
 &cpu_thermal {
+	thermal-sensors = <&bandgap>;
 	coefficients = <348 (-9301)>;
 };
 
diff --git a/arch/arm/boot/dts/omap446x-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap446x-clocks.dtsi
index d9362fef6720..d9362fef6720 100644
--- a/arch/arm/boot/dts/omap446x-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap446x-clocks.dtsi
diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap44xx-clocks.dtsi
index 8df73d285638..8df73d285638 100644
--- a/arch/arm/boot/dts/omap44xx-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap44xx-clocks.dtsi
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/ti/omap/omap5-board-common.dtsi
index 373984c130e0..8946b5580cd9 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap5-board-common.dtsi
@@ -56,7 +56,7 @@
 	};
 
 	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
+	hsusb2_phy: hsusb2-phy-pins {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
 		clocks = <&auxclk1_ck>;
@@ -156,13 +156,13 @@
 			&led_gpio_pins
 	>;
 
-	twl6040_pins: pinmux_twl6040_pins {
+	twl6040_pins: twl6040-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
 		>;
 	};
 
-	mcpdm_pins: pinmux_mcpdm_pins {
+	mcpdm_pins: mcpdm-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
 			OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_ul_data.abemcpdm_ul_data */
@@ -172,7 +172,7 @@
 		>;
 	};
 
-	mcbsp1_pins: pinmux_mcbsp1_pins {
+	mcbsp1_pins: mcbsp1-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
 			OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* abedmic_clk3.abemcbsp1_dx */
@@ -181,7 +181,7 @@
 		>;
 	};
 
-	mcbsp2_pins: pinmux_mcbsp2_pins {
+	mcbsp2_pins: mcbsp2-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dr.abemcbsp2_dr */
 			OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dx.abemcbsp2_dx */
@@ -190,14 +190,14 @@
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
 			OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
-	mcspi2_pins: pinmux_mcspi2_pins {
+	mcspi2_pins: mcspi2-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
 			OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
@@ -206,7 +206,7 @@
 		>;
 	};
 
-	mcspi3_pins: pinmux_mcspi3_pins {
+	mcspi3_pins: mcspi3-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */
 			OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */
@@ -215,7 +215,7 @@
 		>;
 	};
 
-	mmc3_pins: pinmux_mmc3_pins {
+	mmc3_pins: mmc3-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
 			OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
@@ -226,20 +226,20 @@
 		>;
 	};
 
-	wlan_pins: pinmux_wlan_pins {
+	wlan_pins: wlan-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */
 		>;
 	};
 
 	/* TI trees use GPIO mode; msecure mode does not work reliably? */
-	palmas_msecure_pins: palmas_msecure_pins {
+	palmas_msecure_pins: palmas-msecure-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
 		>;
 	};
 
-	usbhost_pins: pinmux_usbhost_pins {
+	usbhost_pins: usbhost-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
 			OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
@@ -252,13 +252,13 @@
 		>;
 	};
 
-	led_gpio_pins: pinmux_led_gpio_pins {
+	led_gpio_pins: led-gpio-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
 		>;
 	};
 
-	uart1_pins: pinmux_uart1_pins {
+	uart1_pins: uart1-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
 			OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
@@ -267,14 +267,14 @@
 		>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
+	uart3_pins: uart3-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
 			OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
 		>;
 	};
 
-	uart5_pins: pinmux_uart5_pins {
+	uart5_pins: uart5-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
 			OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
@@ -283,7 +283,7 @@
 		>;
 	};
 
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+	dss_hdmi_pins: dss-hdmi-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x13c, PIN_INPUT | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
 			OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
@@ -291,7 +291,7 @@
 		>;
 	};
 
-	tpd12s015_pins: pinmux_tpd12s015_pins {
+	tpd12s015_pins: tpd12s015-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6)	/* hdmi_hpd.gpio7_193 */
 		>;
@@ -304,20 +304,20 @@
 			&usbhost_wkup_pins
 	>;
 
-	palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
+	palmas_sys_nirq_pins: palmas-sys-nirq-pins {
 		pinctrl-single,pins = <
 			/* sys_nirq1 is pulled down as the SoC is inverting it for GIC */
 			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0)
 		>;
 	};
 
-	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
+	usbhost_wkup_pins: usbhost-wkup-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
 		>;
 	};
 
-	wlcore_irq_pin: pinmux_wlcore_irq_pin {
+	wlcore_irq_pin: wlcore-irq-pin-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6)	/* llia_wakereqin.gpio1_wk14 */
 		>;
@@ -415,9 +415,9 @@
 
 		gpadc: gpadc {
 			compatible = "ti,palmas-gpadc";
-			interrupts = <18 0
-				      16 0
-				      17 0>;
+			interrupts = <18 0>,
+				     <16 0>,
+				     <17 0>;
 			#io-channel-cells = <1>;
 			ti,channel0-current-microamp = <5>;
 			ti,channel3-current-microamp = <10>;
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/ti/omap/omap5-cm-t54.dts
index ca759b7b8a58..2fd8111de903 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/ti/omap/omap5-cm-t54.dts
@@ -60,7 +60,7 @@
 	};
 
 	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
+	hsusb2_phy: hsusb2-phy-pins {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */
 		#phy-cells = <0>;
@@ -84,36 +84,36 @@
 	};
 
 	lcd0: display {
-                compatible = "startek,startek-kd050c", "panel-dpi";
-                label = "lcd";
-
-                pinctrl-names = "default";
-                pinctrl-0 = <&lcd_pins>;
-
-                enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
-
-                panel-timing {
-                        clock-frequency = <33000000>;
-                        hactive = <800>;
-                        vactive = <480>;
-                        hfront-porch = <40>;
-                        hback-porch = <40>;
-                        hsync-len = <43>;
-                        vback-porch = <29>;
-                        vfront-porch = <13>;
-                        vsync-len = <3>;
-                        hsync-active = <0>;
-                        vsync-active = <0>;
-                        de-active = <1>;
-                        pixelclk-active = <1>;
-                };
-
-                port {
-                        lcd_in: endpoint {
-                                remote-endpoint = <&dpi_lcd_out>;
-                        };
-                };
-        };
+		compatible = "startek,startek-kd050c", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			hsync-len = <43>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			vsync-len = <3>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_lcd_out>;
+			};
+		};
+	};
 
 	hdmi0: connector0 {
 		compatible = "hdmi-connector";
@@ -176,13 +176,13 @@
 
 &omap5_pmx_wkup {
 
-	ads7846_pins: pinmux_ads7846_pins {
+	ads7846_pins: ads7846-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x0042, PIN_INPUT_PULLDOWN | MUX_MODE6)  /* llib_wakereqin.gpio1_wk15 */
 		>;
 	};
 
-	palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
+	palmas_sys_nirq_pins: palmas-sys-nirq-pins {
 		pinctrl-single,pins = <
 			/* sys_nirq1 is pulled down as the SoC is inverting it for GIC */
 			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0)
@@ -197,27 +197,27 @@
 			&usbhost_pins
 	>;
 
-	led_gpio_pins: pinmux_led_gpio_pins {
+	led_gpio_pins: led-gpio-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x00b0, PIN_OUTPUT | MUX_MODE6) /* hsi2_caflag.gpio3_80 */
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c1_pins: i2c1-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x01f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_scl */
 			OMAP5_IOPAD(0x01f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_sda */
 		>;
 	};
 
-	i2c2_pins: pinmux_i2c2_pins {
+	i2c2_pins: i2c2-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x01b8, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
 			OMAP5_IOPAD(0x01ba, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */
 			OMAP5_IOPAD(0x01e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_cmd */
@@ -228,7 +228,7 @@
 		>;
 	};
 
-	mmc2_pins: pinmux_mmc2_pins {
+	mmc2_pins: mmc2-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x0040, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_clk */
 			OMAP5_IOPAD(0x0042, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_cmd */
@@ -243,7 +243,7 @@
 		>;
 	};
 
-	mmc3_pins: pinmux_mmc3_pins {
+	mmc3_pins: mmc3-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
 			OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
@@ -254,14 +254,14 @@
 		>;
 	};
 
-	wlan_gpios_pins: pinmux_wlan_gpios_pins {
+	wlan_gpios_pins: wlan-gpios-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_ul_data.gpio4_109 */
 			OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_dl_data.gpio4_110 */
 		>;
 	};
 
-	usbhost_pins: pinmux_usbhost_pins {
+	usbhost_pins: usbhost-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x00c4, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_strobe */
 			OMAP5_IOPAD(0x00c6, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_data */
@@ -274,7 +274,7 @@
 		>;
 	};
 
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+	dss_hdmi_pins: dss-hdmi-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x013c, PIN_INPUT | MUX_MODE0) /* hdmi_cec */
 			OMAP5_IOPAD(0x0140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl */
@@ -282,19 +282,19 @@
 		>;
 	};
 
-	lcd_pins: pinmux_lcd_pins {
+	lcd_pins: lcd-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x0172, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* timer11_pwm_evt.gpio8_227 */
 		>;
 	};
 
-	hdmi_conn_pins: pinmux_hdmi_conn_pins {
+	hdmi_conn_pins: hdmi-conn-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x013e, PIN_INPUT | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
 		>;
 	};
 
-	dss_dpi_pins: pinmux_dss_dpi_pins {
+	dss_dpi_pins: dss-dpi-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x0104, PIN_OUTPUT | MUX_MODE3) /* rfbi_data15.dispc_data15 */
 			OMAP5_IOPAD(0x0106, PIN_OUTPUT | MUX_MODE3) /* rfbi_data14.dispc_data14 */
@@ -327,7 +327,7 @@
 		>;
 	};
 
-	mcspi2_pins: pinmux_mcspi1_pins {
+	mcspi2_pins: mcspi1-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x00fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
 			OMAP5_IOPAD(0x00fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
@@ -354,7 +354,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <15 0>;			/* gpio1_wk15 */
-		pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>;
 
 
 		ti,x-min = /bits/ 16 <0x0>;
@@ -413,7 +413,7 @@
 
 	clock-frequency = <400000>;
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
@@ -644,8 +644,8 @@
 };
 
 &usb3 {
-       extcon = <&extcon_usb3>;
-       vbus-supply = <&smps10_out1_reg>;
+	extcon = <&extcon_usb3>;
+	vbus-supply = <&smps10_out1_reg>;
 };
 
 &cpu0 {
diff --git a/arch/arm/boot/dts/omap5-core-thermal.dtsi b/arch/arm/boot/dts/ti/omap/omap5-core-thermal.dtsi
index e0d8e39a0014..e0d8e39a0014 100644
--- a/arch/arm/boot/dts/omap5-core-thermal.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap5-core-thermal.dtsi
diff --git a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi b/arch/arm/boot/dts/ti/omap/omap5-gpu-thermal.dtsi
index 1b4b7d9136c8..1b4b7d9136c8 100644
--- a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap5-gpu-thermal.dtsi
diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/ti/omap/omap5-igep0050.dts
index 3851120857d7..0368e32f67e7 100644
--- a/arch/arm/boot/dts/omap5-igep0050.dts
+++ b/arch/arm/boot/dts/ti/omap/omap5-igep0050.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz/
+ * Copyright (C) 2013 ISEE 2007 SL - https://www.isee.biz/
  */
 /dts-v1/;
 
@@ -85,14 +85,14 @@
 };
 
 &omap5_pmx_core {
-	i2c4_pins: pinmux_i2c4_pins {
+	i2c4_pins: i2c4-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0)	/* i2c4_scl */
 			OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
 
-	power_button_pin: pinctrl_power_button_pin {
+	power_button_pin: power-button-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x086, PIN_INPUT | MUX_MODE6)	/* gpio4_118 */
 		>;
diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/ti/omap/omap5-l4-abe.dtsi
index a03bca5a3584..97b0c3b5f573 100644
--- a/arch/arm/boot/dts/omap5-l4-abe.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap5-l4-abe.dtsi
@@ -109,6 +109,8 @@
 				reg = <0x0 0xff>, /* MPU private access */
 				      <0x49022000 0xff>; /* L3 Interconnect */
 				reg-names = "mpu", "dma";
+				clocks = <&abe_clkctrl OMAP5_MCBSP1_CLKCTRL 24>;
+				clock-names = "fck";
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "common";
 				ti,buffer-size = <128>;
@@ -142,6 +144,8 @@
 				reg = <0x0 0xff>, /* MPU private access */
 				      <0x49024000 0xff>; /* L3 Interconnect */
 				reg-names = "mpu", "dma";
+				clocks = <&abe_clkctrl OMAP5_MCBSP2_CLKCTRL 24>;
+				clock-names = "fck";
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "common";
 				ti,buffer-size = <128>;
@@ -175,6 +179,8 @@
 				reg = <0x0 0xff>, /* MPU private access */
 				      <0x49026000 0xff>; /* L3 Interconnect */
 				reg-names = "mpu", "dma";
+				clocks = <&abe_clkctrl OMAP5_MCBSP3_CLKCTRL 24>;
+				clock-names = "fck";
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "common";
 				ti,buffer-size = <128>;
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/ti/omap/omap5-l4.dtsi
index 3b505fe415ed..9f6100c7c34d 100644
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap5-l4.dtsi
@@ -331,14 +331,14 @@
 					      "refclk_60m_ext_p1",
 					      "refclk_60m_ext_p2";
 
-				usbhsohci: ohci@800 {
+				usbhsohci: usb@800 {
 					compatible = "ti,ohci-omap3";
 					reg = <0x800 0x400>;
 					interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 					remote-wakeup-connected;
 				};
 
-				usbhsehci: ehci@c00 {
+				usbhsehci: usb@c00 {
 					compatible = "ti,ehci-omap";
 					reg = <0xc00 0x400>;
 					interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/omap5-sbc-t54.dts b/arch/arm/boot/dts/ti/omap/omap5-sbc-t54.dts
index 657df46251c2..7ae60dc198f3 100644
--- a/arch/arm/boot/dts/omap5-sbc-t54.dts
+++ b/arch/arm/boot/dts/ti/omap/omap5-sbc-t54.dts
@@ -11,14 +11,14 @@
 };
 
 &omap5_pmx_core {
-	i2c4_pins: pinmux_i2c4_pins {
+	i2c4_pins: i2c4-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x00f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
 			OMAP5_IOPAD(0x00fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
 		>;
 	};
 
-	mmc1_aux_pins: pinmux_mmc1_aux_pins {
+	mmc1_aux_pins: mmc1-aux-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* timer5_pwm_evt.gpio8_228 */
 			OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* timer6_pwm_evt.gpio8_229 */
@@ -44,7 +44,7 @@
 
 	clock-frequency = <400000>;
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/ti/omap/omap5-uevm.dts
index 453da9f18a99..933de05d3ca1 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/ti/omap/omap5-uevm.dts
@@ -162,20 +162,20 @@
 };
 
 &omap5_pmx_core {
-	evm_keys_pins: pinmux_evm_keys_gpio_pins {
+	evm_keys_pins: evm-keys-gpio-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x0b6, PIN_INPUT | MUX_MODE6)	/* gpio3_83 */
 		>;
 	};
 
-	i2c5_pins: pinmux_i2c5_pins {
+	i2c5_pins: i2c5-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
 			OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0)		/* i2c5_sda */
 		>;
 	};
 
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: mmc1-pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x1d4, PIN_INPUT_PULLUP | MUX_MODE6)	/* gpio5_152 */
 		>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/ti/omap/omap5.dtsi
index bac6fa838793..6a66214ad0e2 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap5.dtsi
@@ -453,10 +453,11 @@
 			#size-cells = <1>;
 			ranges = <0 0x56000000 0x2000000>;
 
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
+			gpu@0 {
+				compatible = "ti,omap5432-gpu", "img,powervr-sgx544";
+				reg = <0x0 0x2000000>; /* 32MB */
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		target-module@58000000 {
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/omap54xx-clocks.dtsi
index 5cf3b0e78c15..5cf3b0e78c15 100644
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap54xx-clocks.dtsi
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/ti/omap/twl4030.dtsi
index 93e07c18781b..07b9ca942e78 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/ti/omap/twl4030.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
@@ -16,7 +16,7 @@
 		interrupts = <11>;
 	};
 
-	charger: bci {
+	charger: charger {
 		compatible = "ti,twl4030-bci";
 		interrupts = <9>, <2>;
 		bci3v1-supply = <&vusb3v1>;
diff --git a/arch/arm/boot/dts/twl4030_omap3.dtsi b/arch/arm/boot/dts/ti/omap/twl4030_omap3.dtsi
index 683419d5c0e5..89433f251df0 100644
--- a/arch/arm/boot/dts/twl4030_omap3.dtsi
+++ b/arch/arm/boot/dts/ti/omap/twl4030_omap3.dtsi
@@ -14,7 +14,7 @@
 	 * to the SYS_NIRQ line on OMAP.  Therefore, configure the
 	 * defaults for the SYS_NIRQ pin here.
 	 */
-	twl4030_pins: pinmux_twl4030_pins {
+	twl4030_pins: twl4030-pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
 		>;
@@ -28,7 +28,7 @@
  * sys_nvmode2 signaling.
  */
 &omap3_pmx_wkup {
-	twl4030_vpins: pinmux_twl4030_vpins {
+	twl4030_vpins: twl4030-vpins-pins {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0)		/* i2c4_scl.i2c4_scl */
 			OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0)		/* i2c4_sda.i2c4_sda */
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/ti/omap/twl6030.dtsi
index 9d588cfaa5cb..8da969035c41 100644
--- a/arch/arm/boot/dts/twl6030.dtsi
+++ b/arch/arm/boot/dts/ti/omap/twl6030.dtsi
@@ -1,11 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
  * Integrated Power Management Chip
- * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ * https://www.ti.com/lit/ds/symlink/twl6030.pdf
  */
 &twl {
 	compatible = "ti,twl6030";
diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/ti/omap/twl6030_omap4.dtsi
index 5730e46b0067..64e38c7c8be7 100644
--- a/arch/arm/boot/dts/twl6030_omap4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/twl6030_omap4.dtsi
@@ -19,7 +19,7 @@
 };
 
 &omap4_pmx_wkup {
-	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+	twl6030_wkup_pins: twl6030-wkup-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
 		>;
@@ -27,7 +27,7 @@
 };
 
 &omap4_pmx_core {
-	twl6030_pins: pinmux_twl6030_pins {
+	twl6030_pins: twl6030-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
 		>;
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
deleted file mode 100644
index a53b73ee93e9..000000000000
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ /dev/null
@@ -1,619 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Device Tree Source for UniPhier Pro4 SoC
-//
-// Copyright (C) 2015-2016 Socionext Inc.
-//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
-
-#include <dt-bindings/gpio/uniphier-gpio.h>
-
-/ {
-	compatible = "socionext,uniphier-pro4";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			enable-method = "psci";
-			next-level-cache = <&l2>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			enable-method = "psci";
-			next-level-cache = <&l2>;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	clocks {
-		refclk: ref {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		arm_timer_clk: arm-timer {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		interrupt-parent = <&intc>;
-
-		l2: cache-controller@500c0000 {
-			compatible = "socionext,uniphier-system-cache";
-			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
-			      <0x506c0000 0x400>;
-			interrupts = <0 174 4>, <0 175 4>;
-			cache-unified;
-			cache-size = <(768 * 1024)>;
-			cache-sets = <256>;
-			cache-line-size = <128>;
-			cache-level = <2>;
-		};
-
-		spi0: spi@54006000 {
-			compatible = "socionext,uniphier-scssi";
-			status = "disabled";
-			reg = <0x54006000 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 39 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_spi0>;
-			clocks = <&peri_clk 11>;
-			resets = <&peri_rst 11>;
-		};
-
-		serial0: serial@54006800 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006800 0x40>;
-			interrupts = <0 33 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart0>;
-			clocks = <&peri_clk 0>;
-			resets = <&peri_rst 0>;
-		};
-
-		serial1: serial@54006900 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006900 0x40>;
-			interrupts = <0 35 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart1>;
-			clocks = <&peri_clk 1>;
-			resets = <&peri_rst 1>;
-		};
-
-		serial2: serial@54006a00 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006a00 0x40>;
-			interrupts = <0 37 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart2>;
-			clocks = <&peri_clk 2>;
-			resets = <&peri_rst 2>;
-		};
-
-		serial3: serial@54006b00 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006b00 0x40>;
-			interrupts = <0 177 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart3>;
-			clocks = <&peri_clk 3>;
-			resets = <&peri_rst 3>;
-		};
-
-		gpio: gpio@55000000 {
-			compatible = "socionext,uniphier-gpio";
-			reg = <0x55000000 0x200>;
-			interrupt-parent = <&aidet>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl 0 0 0>;
-			gpio-ranges-group-names = "gpio_range";
-			ngpios = <248>;
-			socionext,interrupt-ranges = <0 48 16>, <16 154 5>;
-		};
-
-		i2c0: i2c@58780000 {
-			compatible = "socionext,uniphier-fi2c";
-			status = "disabled";
-			reg = <0x58780000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 41 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c0>;
-			clocks = <&peri_clk 4>;
-			resets = <&peri_rst 4>;
-			clock-frequency = <100000>;
-		};
-
-		i2c1: i2c@58781000 {
-			compatible = "socionext,uniphier-fi2c";
-			status = "disabled";
-			reg = <0x58781000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 42 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c1>;
-			clocks = <&peri_clk 5>;
-			resets = <&peri_rst 5>;
-			clock-frequency = <100000>;
-		};
-
-		i2c2: i2c@58782000 {
-			compatible = "socionext,uniphier-fi2c";
-			status = "disabled";
-			reg = <0x58782000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 43 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c2>;
-			clocks = <&peri_clk 6>;
-			resets = <&peri_rst 6>;
-			clock-frequency = <100000>;
-		};
-
-		i2c3: i2c@58783000 {
-			compatible = "socionext,uniphier-fi2c";
-			status = "disabled";
-			reg = <0x58783000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 44 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c3>;
-			clocks = <&peri_clk 7>;
-			resets = <&peri_rst 7>;
-			clock-frequency = <100000>;
-		};
-
-		/* i2c4 does not exist */
-
-		/* chip-internal connection for DMD */
-		i2c5: i2c@58785000 {
-			compatible = "socionext,uniphier-fi2c";
-			reg = <0x58785000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 25 4>;
-			clocks = <&peri_clk 9>;
-			resets = <&peri_rst 9>;
-			clock-frequency = <400000>;
-		};
-
-		/* chip-internal connection for HDMI */
-		i2c6: i2c@58786000 {
-			compatible = "socionext,uniphier-fi2c";
-			reg = <0x58786000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 26 4>;
-			clocks = <&peri_clk 10>;
-			resets = <&peri_rst 10>;
-			clock-frequency = <400000>;
-		};
-
-		system_bus: system-bus@58c00000 {
-			compatible = "socionext,uniphier-system-bus";
-			status = "disabled";
-			reg = <0x58c00000 0x400>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_system_bus>;
-		};
-
-		smpctrl@59801000 {
-			compatible = "socionext,uniphier-smpctrl";
-			reg = <0x59801000 0x400>;
-		};
-
-		mioctrl@59810000 {
-			compatible = "socionext,uniphier-pro4-mioctrl",
-				     "simple-mfd", "syscon";
-			reg = <0x59810000 0x800>;
-
-			mio_clk: clock {
-				compatible = "socionext,uniphier-pro4-mio-clock";
-				#clock-cells = <1>;
-			};
-
-			mio_rst: reset {
-				compatible = "socionext,uniphier-pro4-mio-reset";
-				#reset-cells = <1>;
-			};
-		};
-
-		perictrl@59820000 {
-			compatible = "socionext,uniphier-pro4-perictrl",
-				     "simple-mfd", "syscon";
-			reg = <0x59820000 0x200>;
-
-			peri_clk: clock {
-				compatible = "socionext,uniphier-pro4-peri-clock";
-				#clock-cells = <1>;
-			};
-
-			peri_rst: reset {
-				compatible = "socionext,uniphier-pro4-peri-reset";
-				#reset-cells = <1>;
-			};
-		};
-
-		dmac: dma-controller@5a000000 {
-			compatible = "socionext,uniphier-mio-dmac";
-			reg = <0x5a000000 0x1000>;
-			interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
-				     <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
-			clocks = <&mio_clk 7>;
-			resets = <&mio_rst 7>;
-			#dma-cells = <1>;
-		};
-
-		sd: mmc@5a400000 {
-			compatible = "socionext,uniphier-sd-v2.91";
-			status = "disabled";
-			reg = <0x5a400000 0x200>;
-			interrupts = <0 76 4>;
-			pinctrl-names = "default", "uhs";
-			pinctrl-0 = <&pinctrl_sd>;
-			pinctrl-1 = <&pinctrl_sd_uhs>;
-			clocks = <&mio_clk 0>;
-			reset-names = "host", "bridge";
-			resets = <&mio_rst 0>, <&mio_rst 3>;
-			dma-names = "rx-tx";
-			dmas = <&dmac 4>;
-			bus-width = <4>;
-			cap-sd-highspeed;
-			sd-uhs-sdr12;
-			sd-uhs-sdr25;
-			sd-uhs-sdr50;
-		};
-
-		emmc: mmc@5a500000 {
-			compatible = "socionext,uniphier-sd-v2.91";
-			status = "disabled";
-			reg = <0x5a500000 0x200>;
-			interrupts = <0 78 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_emmc>;
-			clocks = <&mio_clk 1>;
-			reset-names = "host", "bridge", "hw";
-			resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
-			dma-names = "rx-tx";
-			dmas = <&dmac 5>;
-			bus-width = <8>;
-			cap-mmc-highspeed;
-			cap-mmc-hw-reset;
-			non-removable;
-		};
-
-		sd1: mmc@5a600000 {
-			compatible = "socionext,uniphier-sd-v2.91";
-			status = "disabled";
-			reg = <0x5a600000 0x200>;
-			interrupts = <0 85 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_sd1>;
-			clocks = <&mio_clk 2>;
-			reset-names = "host", "bridge";
-			resets = <&mio_rst 2>, <&mio_rst 5>;
-			dma-names = "rx-tx";
-			dmas = <&dmac 6>;
-			bus-width = <4>;
-			cap-sd-highspeed;
-		};
-
-		usb2: usb@5a800100 {
-			compatible = "socionext,uniphier-ehci", "generic-ehci";
-			status = "disabled";
-			reg = <0x5a800100 0x100>;
-			interrupts = <0 80 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb2>;
-			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
-				 <&mio_clk 12>;
-			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
-				 <&mio_rst 12>;
-			phy-names = "usb";
-			phys = <&usb_phy0>;
-			has-transaction-translator;
-		};
-
-		usb3: usb@5a810100 {
-			compatible = "socionext,uniphier-ehci", "generic-ehci";
-			status = "disabled";
-			reg = <0x5a810100 0x100>;
-			interrupts = <0 81 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb3>;
-			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
-				 <&mio_clk 13>;
-			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
-				 <&mio_rst 13>;
-			phy-names = "usb";
-			phys = <&usb_phy1>;
-			has-transaction-translator;
-		};
-
-		soc_glue: soc-glue@5f800000 {
-			compatible = "socionext,uniphier-pro4-soc-glue",
-				     "simple-mfd", "syscon";
-			reg = <0x5f800000 0x2000>;
-
-			pinctrl: pinctrl {
-				compatible = "socionext,uniphier-pro4-pinctrl";
-			};
-
-			usb-phy {
-				compatible = "socionext,uniphier-pro4-usb2-phy";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb_phy0: phy@0 {
-					reg = <0>;
-					#phy-cells = <0>;
-				};
-
-				usb_phy1: phy@1 {
-					reg = <1>;
-					#phy-cells = <0>;
-				};
-
-				usb_phy2: phy@2 {
-					reg = <2>;
-					#phy-cells = <0>;
-					vbus-supply = <&usb0_vbus>;
-				};
-
-				usb_phy3: phy@3 {
-					reg = <3>;
-					#phy-cells = <0>;
-					vbus-supply = <&usb1_vbus>;
-				};
-			};
-		};
-
-		soc-glue@5f900000 {
-			compatible = "socionext,uniphier-pro4-soc-glue-debug",
-				     "simple-mfd";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x5f900000 0x2000>;
-
-			efuse@100 {
-				compatible = "socionext,uniphier-efuse";
-				reg = <0x100 0x28>;
-			};
-
-			efuse@130 {
-				compatible = "socionext,uniphier-efuse";
-				reg = <0x130 0x8>;
-			};
-
-			efuse@200 {
-				compatible = "socionext,uniphier-efuse";
-				reg = <0x200 0x14>;
-			};
-		};
-
-		xdmac: dma-controller@5fc10000 {
-			compatible = "socionext,uniphier-xdmac";
-			reg = <0x5fc10000 0x5300>;
-			interrupts = <0 188 4>;
-			dma-channels = <16>;
-			#dma-cells = <2>;
-		};
-
-		aidet: interrupt-controller@5fc20000 {
-			compatible = "socionext,uniphier-pro4-aidet";
-			reg = <0x5fc20000 0x200>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		timer@60000200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x304>;
-			clocks = <&arm_timer_clk>;
-		};
-
-		timer@60000600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x304>;
-			clocks = <&arm_timer_clk>;
-		};
-
-		intc: interrupt-controller@60001000 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0x60001000 0x1000>,
-			      <0x60000100 0x100>;
-			#interrupt-cells = <3>;
-			interrupt-controller;
-		};
-
-		sysctrl@61840000 {
-			compatible = "socionext,uniphier-pro4-sysctrl",
-				     "simple-mfd", "syscon";
-			reg = <0x61840000 0x10000>;
-
-			sys_clk: clock {
-				compatible = "socionext,uniphier-pro4-clock";
-				#clock-cells = <1>;
-			};
-
-			sys_rst: reset {
-				compatible = "socionext,uniphier-pro4-reset";
-				#reset-cells = <1>;
-			};
-		};
-
-		eth: ethernet@65000000 {
-			compatible = "socionext,uniphier-pro4-ave4";
-			status = "disabled";
-			reg = <0x65000000 0x8500>;
-			interrupts = <0 66 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_ether_rgmii>;
-			clock-names = "gio", "ether", "ether-gb", "ether-phy";
-			clocks = <&sys_clk 12>, <&sys_clk 6>, <&sys_clk 7>,
-				 <&sys_clk 10>;
-			reset-names = "gio", "ether";
-			resets = <&sys_rst 12>, <&sys_rst 6>;
-			phy-mode = "rgmii";
-			local-mac-address = [00 00 00 00 00 00];
-			socionext,syscon-phy-mode = <&soc_glue 0>;
-
-			mdio: mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		usb0: usb@65a00000 {
-			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
-			status = "disabled";
-			reg = <0x65a00000 0xcd00>;
-			interrupt-names = "host", "peripheral";
-			interrupts = <0 134 4>, <0 135 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb0>;
-			clock-names = "ref", "bus_early", "suspend";
-			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
-			resets = <&usb0_rst 4>;
-			phys = <&usb_phy2>, <&usb0_ssphy>;
-			dr_mode = "host";
-		};
-
-		usb-glue@65b00000 {
-			compatible = "socionext,uniphier-pro4-dwc3-glue",
-				     "simple-mfd";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x65b00000 0x100>;
-
-			usb0_vbus: regulator@0 {
-				compatible = "socionext,uniphier-pro4-usb3-regulator";
-				reg = <0 0x10>;
-				clock-names = "gio", "link";
-				clocks = <&sys_clk 12>, <&sys_clk 14>;
-				reset-names = "gio", "link";
-				resets = <&sys_rst 12>, <&sys_rst 14>;
-			};
-
-			usb0_ssphy: ss-phy@10 {
-				compatible = "socionext,uniphier-pro4-usb3-ssphy";
-				reg = <0x10 0x10>;
-				#phy-cells = <0>;
-				clock-names = "gio", "link";
-				clocks = <&sys_clk 12>, <&sys_clk 14>;
-				reset-names = "gio", "link";
-				resets = <&sys_rst 12>, <&sys_rst 14>;
-				vbus-supply = <&usb0_vbus>;
-			};
-
-			usb0_rst: reset@40 {
-				compatible = "socionext,uniphier-pro4-usb3-reset";
-				reg = <0x40 0x4>;
-				#reset-cells = <1>;
-				clock-names = "gio", "link";
-				clocks = <&sys_clk 12>, <&sys_clk 14>;
-				reset-names = "gio", "link";
-				resets = <&sys_rst 12>, <&sys_rst 14>;
-			};
-		};
-
-		usb1: usb@65c00000 {
-			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
-			status = "disabled";
-			reg = <0x65c00000 0xcd00>;
-			interrupt-names = "host", "peripheral";
-			interrupts = <0 137 4>, <0 138 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb1>;
-			clock-names = "ref", "bus_early", "suspend";
-			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
-			resets = <&usb1_rst 4>;
-			phys = <&usb_phy3>;
-			dr_mode = "host";
-		};
-
-		usb-glue@65d00000 {
-			compatible = "socionext,uniphier-pro4-dwc3-glue",
-				     "simple-mfd";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x65d00000 0x100>;
-
-			usb1_vbus: regulator@0 {
-				compatible = "socionext,uniphier-pro4-usb3-regulator";
-				reg = <0 0x10>;
-				clock-names = "gio", "link";
-				clocks = <&sys_clk 12>, <&sys_clk 15>;
-				reset-names = "gio", "link";
-				resets = <&sys_rst 12>, <&sys_rst 15>;
-			};
-
-			usb1_rst: reset@40 {
-				compatible = "socionext,uniphier-pro4-usb3-reset";
-				reg = <0x40 0x4>;
-				#reset-cells = <1>;
-				clock-names = "gio", "link";
-				clocks = <&sys_clk 12>, <&sys_clk 15>;
-				reset-names = "gio", "link";
-				resets = <&sys_rst 12>, <&sys_rst 15>;
-			};
-		};
-
-		nand: nand-controller@68000000 {
-			compatible = "socionext,uniphier-denali-nand-v5a";
-			status = "disabled";
-			reg-names = "nand_data", "denali_reg";
-			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 65 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_nand>;
-			clock-names = "nand", "nand_x", "ecc";
-			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			reset-names = "nand", "reg";
-			resets = <&sys_rst 2>, <&sys_rst 2>;
-		};
-	};
-};
-
-#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/unisoc/Makefile b/arch/arm/boot/dts/unisoc/Makefile
new file mode 100644
index 000000000000..dba5cd874ee7
--- /dev/null
+++ b/arch/arm/boot/dts/unisoc/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_RDA) += \
+	rda8810pl-orangepi-2g-iot.dtb \
+	rda8810pl-orangepi-i96.dtb
diff --git a/arch/arm/boot/dts/rda8810pl-orangepi-2g-iot.dts b/arch/arm/boot/dts/unisoc/rda8810pl-orangepi-2g-iot.dts
index 98e34248ae80..98e34248ae80 100644
--- a/arch/arm/boot/dts/rda8810pl-orangepi-2g-iot.dts
+++ b/arch/arm/boot/dts/unisoc/rda8810pl-orangepi-2g-iot.dts
diff --git a/arch/arm/boot/dts/rda8810pl-orangepi-i96.dts b/arch/arm/boot/dts/unisoc/rda8810pl-orangepi-i96.dts
index 728f76931b99..728f76931b99 100644
--- a/arch/arm/boot/dts/rda8810pl-orangepi-i96.dts
+++ b/arch/arm/boot/dts/unisoc/rda8810pl-orangepi-i96.dts
diff --git a/arch/arm/boot/dts/rda8810pl.dtsi b/arch/arm/boot/dts/unisoc/rda8810pl.dtsi
index f30d6ece49fb..f30d6ece49fb 100644
--- a/arch/arm/boot/dts/rda8810pl.dtsi
+++ b/arch/arm/boot/dts/unisoc/rda8810pl.dtsi
diff --git a/arch/arm/boot/dts/usb_a9260.dts b/arch/arm/boot/dts/usb_a9260.dts
deleted file mode 100644
index 6cfa83921ac2..000000000000
--- a/arch/arm/boot/dts/usb_a9260.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * usb_a9260.dts - Device Tree file for Caloa USB A9260 board
- *
- *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-/dts-v1/;
-#include "at91sam9260.dtsi"
-#include "usb_a9260_common.dtsi"
-
-/ {
-	model = "Calao USB A9260";
-	compatible = "calao,usb-a9260", "atmel,at91sam9260", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	ahb {
-		apb {
-			shdwc@fffffd10 {
-				atmel,wakeup-counter = <10>;
-				atmel,wakeup-rtt-timer;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
deleted file mode 100644
index 2f667b083e81..000000000000
--- a/arch/arm/boot/dts/usb_a9g20.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
- *
- *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-/dts-v1/;
-#include "usb_a9g20_common.dtsi"
-
-/ {
-	model = "Calao USB A9G20";
-	compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
-};
diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi
deleted file mode 100644
index 7d10b36db1ee..000000000000
--- a/arch/arm/boot/dts/usb_a9g20_common.dtsi
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
- *
- *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-
-#include "at91sam9g20.dtsi"
-#include "usb_a9260_common.dtsi"
-
-/ {
-	chosen {
-		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	i2c-gpio-0 {
-		rtc@56 {
-			compatible = "microcrystal,rv3029";
-			reg = <0x56>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/usb_a9g20_lpw.dts b/arch/arm/boot/dts/usb_a9g20_lpw.dts
deleted file mode 100644
index f65712015d40..000000000000
--- a/arch/arm/boot/dts/usb_a9g20_lpw.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * usb_a9g20_lpw.dts - Device Tree file for Caloa USB A9G20 Low Power board
- *
- *  Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-/dts-v1/;
-#include "usb_a9g20_common.dtsi"
-
-/ {
-	model = "Calao USB A9G20 Low Power";
-	compatible = "calao,usb-a9g20-lpw", "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
-
-	ahb {
-		apb {
-			spi1: spi@fffcc000 {
-				cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-				mmc-slot@0 {
-					compatible = "mmc-spi-slot";
-					reg = <0>;
-					voltage-ranges = <3200 3400>;
-					spi-max-frequency = <25000000>;
-					interrupt-parent = <&pioC>;
-					interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
deleted file mode 100644
index 8af4b77fe655..000000000000
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ /dev/null
@@ -1,494 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ARM Ltd. Versatile Express
- *
- * Motherboard Express uATX
- * V2M-P1
- *
- * HBI-0190D
- *
- * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
- * Technical Reference Manual)
- *
- * WARNING! The hardware described in this file is independent from the
- * original variant (vexpress-v2m.dtsi), but there is a strong
- * correspondence between the two configurations.
- *
- * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
- * CHANGES TO vexpress-v2m.dtsi!
- */
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	v2m_fixed_3v3: fixed-regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	v2m_clk24mhz: clk24mhz {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "v2m:clk24mhz";
-	};
-
-	v2m_refclk1mhz: refclk1mhz {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <1000000>;
-		clock-output-names = "v2m:refclk1mhz";
-	};
-
-	v2m_refclk32khz: refclk32khz {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "v2m:refclk32khz";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-1 {
-			label = "v2m:green:user1";
-			gpios = <&v2m_led_gpios 0 0>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-2 {
-			label = "v2m:green:user2";
-			gpios = <&v2m_led_gpios 1 0>;
-			linux,default-trigger = "disk-activity";
-		};
-
-		led-3 {
-			label = "v2m:green:user3";
-			gpios = <&v2m_led_gpios 2 0>;
-			linux,default-trigger = "cpu0";
-		};
-
-		led-4 {
-			label = "v2m:green:user4";
-			gpios = <&v2m_led_gpios 3 0>;
-			linux,default-trigger = "cpu1";
-		};
-
-		led-5 {
-			label = "v2m:green:user5";
-			gpios = <&v2m_led_gpios 4 0>;
-			linux,default-trigger = "cpu2";
-		};
-
-		led-6 {
-			label = "v2m:green:user6";
-			gpios = <&v2m_led_gpios 5 0>;
-			linux,default-trigger = "cpu3";
-		};
-
-		led-7 {
-			label = "v2m:green:user7";
-			gpios = <&v2m_led_gpios 6 0>;
-			linux,default-trigger = "cpu4";
-		};
-
-		led-8 {
-			label = "v2m:green:user8";
-			gpios = <&v2m_led_gpios 7 0>;
-			linux,default-trigger = "cpu5";
-		};
-	};
-
-	bus@8000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 63>;
-		interrupt-map = <0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
-				<0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
-				<0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
-				<0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
-				<0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
-				<0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
-				<0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
-				<0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
-				<0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
-				<0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
-				<0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-				<0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-				<0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				<0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				<0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				<0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-				<0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				<0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-				<0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-				<0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-				<0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-				<0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-				<0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
-				<0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-				<0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-				<0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-				<0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-				<0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
-				<0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
-				<0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-				<0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-				<0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-				<0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-				<0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-				<0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-				<0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
-				<0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
-				<0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-				<0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
-				<0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-				<0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-				<0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-				<0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-
-		motherboard-bus@8000000 {
-			arm,hbi = <0x190>;
-			arm,vexpress,site = <0>;
-			compatible = "arm,vexpress,v2m-p1", "simple-bus";
-			#address-cells = <2>; /* SMB chipselect number and offset */
-			#size-cells = <1>;
-			ranges = <0 0 0x08000000 0x04000000>,
-				 <1 0 0x14000000 0x04000000>,
-				 <2 0 0x18000000 0x04000000>,
-				 <3 0 0x1c000000 0x04000000>,
-				 <4 0 0x0c000000 0x04000000>,
-				 <5 0 0x10000000 0x04000000>;
-
-			nor_flash: flash@0 {
-				compatible = "arm,vexpress-flash", "cfi-flash";
-				reg = <0 0x00000000 0x04000000>,
-				      <4 0x00000000 0x04000000>;
-				bank-width = <4>;
-				partitions {
-					compatible = "arm,arm-firmware-suite";
-				};
-			};
-
-			psram@100000000 {
-				compatible = "arm,vexpress-psram", "mtd-ram";
-				reg = <1 0x00000000 0x02000000>;
-				bank-width = <4>;
-			};
-
-			ethernet@202000000 {
-				compatible = "smsc,lan9118", "smsc,lan9115";
-				reg = <2 0x02000000 0x10000>;
-				interrupts = <15>;
-				phy-mode = "mii";
-				reg-io-width = <4>;
-				smsc,irq-active-high;
-				smsc,irq-push-pull;
-				vdd33a-supply = <&v2m_fixed_3v3>;
-				vddvario-supply = <&v2m_fixed_3v3>;
-			};
-
-			usb@203000000 {
-				compatible = "nxp,usb-isp1761";
-				reg = <2 0x03000000 0x20000>;
-				interrupts = <16>;
-				dr_mode = "peripheral";
-			};
-
-			iofpga-bus@300000000 {
-				compatible = "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 3 0 0x200000>;
-
-				v2m_sysreg: sysreg@10000 {
-					compatible = "arm,vexpress-sysreg";
-					reg = <0x010000 0x1000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x10000 0x1000>;
-
-					v2m_led_gpios: gpio@8 {
-						compatible = "arm,vexpress-sysreg,sys_led";
-						reg = <0x008 4>;
-						gpio-controller;
-						#gpio-cells = <2>;
-					};
-
-					v2m_mmc_gpios: gpio@48 {
-						compatible = "arm,vexpress-sysreg,sys_mci";
-						reg = <0x048 4>;
-						gpio-controller;
-						#gpio-cells = <2>;
-					};
-
-					v2m_flash_gpios: gpio@4c {
-						compatible = "arm,vexpress-sysreg,sys_flash";
-						reg = <0x04c 4>;
-						gpio-controller;
-						#gpio-cells = <2>;
-					};
-				};
-
-				v2m_sysctl: sysctl@20000 {
-					compatible = "arm,sp810", "arm,primecell";
-					reg = <0x020000 0x1000>;
-					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
-					clock-names = "refclk", "timclk", "apb_pclk";
-					#clock-cells = <1>;
-					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
-					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
-					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
-				};
-
-				/* PCI-E I2C bus */
-				v2m_i2c_pcie: i2c@30000 {
-					compatible = "arm,versatile-i2c";
-					reg = <0x030000 0x1000>;
-
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					pcie-switch@60 {
-						compatible = "idt,89hpes32h8";
-						reg = <0x60>;
-					};
-				};
-
-				aaci@40000 {
-					compatible = "arm,pl041", "arm,primecell";
-					reg = <0x040000 0x1000>;
-					interrupts = <11>;
-					clocks = <&smbclk>;
-					clock-names = "apb_pclk";
-				};
-
-				mmc@50000 {
-					compatible = "arm,pl180", "arm,primecell";
-					reg = <0x050000 0x1000>;
-					interrupts = <9>, <10>;
-					cd-gpios = <&v2m_mmc_gpios 0 0>;
-					wp-gpios = <&v2m_mmc_gpios 1 0>;
-					max-frequency = <12000000>;
-					vmmc-supply = <&v2m_fixed_3v3>;
-					clocks = <&v2m_clk24mhz>, <&smbclk>;
-					clock-names = "mclk", "apb_pclk";
-				};
-
-				kmi@60000 {
-					compatible = "arm,pl050", "arm,primecell";
-					reg = <0x060000 0x1000>;
-					interrupts = <12>;
-					clocks = <&v2m_clk24mhz>, <&smbclk>;
-					clock-names = "KMIREFCLK", "apb_pclk";
-				};
-
-				kmi@70000 {
-					compatible = "arm,pl050", "arm,primecell";
-					reg = <0x070000 0x1000>;
-					interrupts = <13>;
-					clocks = <&v2m_clk24mhz>, <&smbclk>;
-					clock-names = "KMIREFCLK", "apb_pclk";
-				};
-
-				v2m_serial0: serial@90000 {
-					compatible = "arm,pl011", "arm,primecell";
-					reg = <0x090000 0x1000>;
-					interrupts = <5>;
-					clocks = <&v2m_oscclk2>, <&smbclk>;
-					clock-names = "uartclk", "apb_pclk";
-				};
-
-				v2m_serial1: serial@a0000 {
-					compatible = "arm,pl011", "arm,primecell";
-					reg = <0x0a0000 0x1000>;
-					interrupts = <6>;
-					clocks = <&v2m_oscclk2>, <&smbclk>;
-					clock-names = "uartclk", "apb_pclk";
-				};
-
-				v2m_serial2: serial@b0000 {
-					compatible = "arm,pl011", "arm,primecell";
-					reg = <0x0b0000 0x1000>;
-					interrupts = <7>;
-					clocks = <&v2m_oscclk2>, <&smbclk>;
-					clock-names = "uartclk", "apb_pclk";
-				};
-
-				v2m_serial3: serial@c0000 {
-					compatible = "arm,pl011", "arm,primecell";
-					reg = <0x0c0000 0x1000>;
-					interrupts = <8>;
-					clocks = <&v2m_oscclk2>, <&smbclk>;
-					clock-names = "uartclk", "apb_pclk";
-				};
-
-				watchdog@f0000 {
-					compatible = "arm,sp805", "arm,primecell";
-					reg = <0x0f0000 0x1000>;
-					interrupts = <0>;
-					clocks = <&v2m_refclk32khz>, <&smbclk>;
-					clock-names = "wdog_clk", "apb_pclk";
-				};
-
-				v2m_timer01: timer@110000 {
-					compatible = "arm,sp804", "arm,primecell";
-					reg = <0x110000 0x1000>;
-					interrupts = <2>;
-					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
-					clock-names = "timclken1", "timclken2", "apb_pclk";
-				};
-
-				v2m_timer23: timer@120000 {
-					compatible = "arm,sp804", "arm,primecell";
-					reg = <0x120000 0x1000>;
-					interrupts = <3>;
-					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
-					clock-names = "timclken1", "timclken2", "apb_pclk";
-				};
-
-				/* DVI I2C bus */
-				v2m_i2c_dvi: i2c@160000 {
-					compatible = "arm,versatile-i2c";
-					reg = <0x160000 0x1000>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					dvi-transmitter@39 {
-						compatible = "sil,sii9022-tpi", "sil,sii9022";
-						reg = <0x39>;
-
-						ports {
-							#address-cells = <1>;
-							#size-cells = <0>;
-
-							port@0 {
-								reg = <0>;
-								dvi_bridge_in: endpoint {
-									remote-endpoint = <&clcd_pads>;
-								};
-							};
-						};
-					};
-
-					dvi-transmitter@60 {
-						compatible = "sil,sii9022-cpi", "sil,sii9022";
-						reg = <0x60>;
-					};
-				};
-
-				rtc@170000 {
-					compatible = "arm,pl031", "arm,primecell";
-					reg = <0x170000 0x1000>;
-					interrupts = <4>;
-					clocks = <&smbclk>;
-					clock-names = "apb_pclk";
-				};
-
-				compact-flash@1a0000 {
-					compatible = "arm,vexpress-cf", "ata-generic";
-					reg = <0x1a0000 0x100
-					       0x1a0100 0xf00>;
-					reg-shift = <2>;
-				};
-
-				clcd@1f0000 {
-					compatible = "arm,pl111", "arm,primecell";
-					reg = <0x1f0000 0x1000>;
-					interrupt-names = "combined";
-					interrupts = <14>;
-					clocks = <&v2m_oscclk1>, <&smbclk>;
-					clock-names = "clcdclk", "apb_pclk";
-					/* 800x600 16bpp @36MHz works fine */
-					max-memory-bandwidth = <54000000>;
-					memory-region = <&vram>;
-
-					port {
-						clcd_pads: endpoint {
-							remote-endpoint = <&dvi_bridge_in>;
-							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-						};
-					};
-				};
-
-				mcc {
-					compatible = "arm,vexpress,config-bus";
-					arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-					oscclk0 {
-						/* MCC static memory clock */
-						compatible = "arm,vexpress-osc";
-						arm,vexpress-sysreg,func = <1 0>;
-						freq-range = <25000000 60000000>;
-						#clock-cells = <0>;
-						clock-output-names = "v2m:oscclk0";
-					};
-
-					v2m_oscclk1: oscclk1 {
-						/* CLCD clock */
-						compatible = "arm,vexpress-osc";
-						arm,vexpress-sysreg,func = <1 1>;
-						freq-range = <23750000 65000000>;
-						#clock-cells = <0>;
-						clock-output-names = "v2m:oscclk1";
-					};
-
-					v2m_oscclk2: oscclk2 {
-						/* IO FPGA peripheral clock */
-						compatible = "arm,vexpress-osc";
-						arm,vexpress-sysreg,func = <1 2>;
-						freq-range = <24000000 24000000>;
-						#clock-cells = <0>;
-						clock-output-names = "v2m:oscclk2";
-					};
-
-					volt-vio {
-						/* Logic level voltage */
-						compatible = "arm,vexpress-volt";
-						arm,vexpress-sysreg,func = <2 0>;
-						regulator-name = "VIO";
-						regulator-always-on;
-						label = "VIO";
-					};
-
-					temp-mcc {
-						/* MCC internal operating temperature */
-						compatible = "arm,vexpress-temp";
-						arm,vexpress-sysreg,func = <4 0>;
-						label = "MCC";
-					};
-
-					reset {
-						compatible = "arm,vexpress-reset";
-						arm,vexpress-sysreg,func = <5 0>;
-					};
-
-					muxfpga {
-						compatible = "arm,vexpress-muxfpga";
-						arm,vexpress-sysreg,func = <7 0>;
-					};
-
-					shutdown {
-						compatible = "arm,vexpress-shutdown";
-						arm,vexpress-sysreg,func = <8 0>;
-					};
-
-					reboot {
-						compatible = "arm,vexpress-reboot";
-						arm,vexpress-sysreg,func = <9 0>;
-					};
-
-					dvimode {
-						compatible = "arm,vexpress-dvimode";
-						arm,vexpress-sysreg,func = <11 0>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
deleted file mode 100644
index cc1e069c44e6..000000000000
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ /dev/null
@@ -1,350 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2014-2020 Toradex
- *
- */
-
-/ {
-	aliases {
-		ethernet0 = &fec1;
-		ethernet1 = &fec0;
-	};
-
-	bl: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		pwms = <&pwm0 0 5000000 0>;
-		enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-	};
-
-	reg_module_3v3: regulator-module-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "+V3.3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_module_3v3_avdd: regulator-module-3v3-avdd {
-		compatible = "regulator-fixed";
-		regulator-name = "+V3.3_AVDD_AUDIO";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&adc0 {
-	status = "okay";
-	vref-supply = <&reg_module_3v3_avdd>;
-};
-
-&adc1 {
-	status = "okay";
-	vref-supply = <&reg_module_3v3_avdd>;
-};
-
-&can0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan0>;
-	status = "disabled";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
-};
-
-&clks {
-	assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
-			  <&clks VF610_CLK_ENET_TS_SEL>;
-	assigned-clock-parents = <&clks VF610_CLK_ENET_50M>,
-				 <&clks VF610_CLK_ENET_50M>;
-};
-
-&dspi1 {
-	bus-num = <1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_dspi1>;
-};
-
-&edma0 {
-	status = "okay";
-};
-
-&edma1 {
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	bus-width = <4>;
-	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-	disable-wp;
-};
-
-&fec1 {
-	phy-mode = "rmii";
-	phy-supply = <&reg_module_3v3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c0>;
-	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	status = "okay";
-
-	nand@0 {
-		compatible = "fsl,vf610-nfc-nandcs";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		nand-bus-width = <8>;
-		nand-ecc-mode = "hw";
-		nand-ecc-strength = <32>;
-		nand-ecc-step-size = <2048>;
-		nand-on-flash-bbt;
-	};
-};
-
-&pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0>;
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart0>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-};
-
-&usbdev0 {
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	status = "okay";
-};
-
-&usbmisc0 {
-	status = "okay";
-};
-
-&usbmisc1 {
-	status = "okay";
-};
-
-&usbphy0 {
-	status = "okay";
-};
-
-&usbphy1 {
-	status = "okay";
-};
-
-&iomuxc {
-	vf610-colibri {
-		pinctrl_flexcan0: can0grp {
-			fsl,pins = <
-				VF610_PAD_PTB14__CAN0_RX	0x31F1
-				VF610_PAD_PTB15__CAN0_TX	0x31F2
-			>;
-		};
-
-		pinctrl_flexcan1: can1grp {
-			fsl,pins = <
-				VF610_PAD_PTB16__CAN1_RX	0x31F1
-				VF610_PAD_PTB17__CAN1_TX	0x31F2
-			>;
-		};
-
-		pinctrl_gpio_ext: gpio_ext {
-			fsl,pins = <
-				VF610_PAD_PTD10__GPIO_89	0x22ed /* EXT_IO_0 */
-				VF610_PAD_PTD9__GPIO_88		0x22ed /* EXT_IO_1 */
-				VF610_PAD_PTD26__GPIO_68	0x22ed /* EXT_IO_2 */
-			>;
-		};
-
-		pinctrl_dcu0_1: dcu0grp_1 {
-			fsl,pins = <
-				VF610_PAD_PTE0__DCU0_HSYNC	0x1902
-				VF610_PAD_PTE1__DCU0_VSYNC	0x1902
-				VF610_PAD_PTE2__DCU0_PCLK	0x1902
-				VF610_PAD_PTE4__DCU0_DE		0x1902
-				VF610_PAD_PTE5__DCU0_R0		0x1902
-				VF610_PAD_PTE6__DCU0_R1		0x1902
-				VF610_PAD_PTE7__DCU0_R2		0x1902
-				VF610_PAD_PTE8__DCU0_R3		0x1902
-				VF610_PAD_PTE9__DCU0_R4		0x1902
-				VF610_PAD_PTE10__DCU0_R5	0x1902
-				VF610_PAD_PTE11__DCU0_R6	0x1902
-				VF610_PAD_PTE12__DCU0_R7	0x1902
-				VF610_PAD_PTE13__DCU0_G0	0x1902
-				VF610_PAD_PTE14__DCU0_G1	0x1902
-				VF610_PAD_PTE15__DCU0_G2	0x1902
-				VF610_PAD_PTE16__DCU0_G3	0x1902
-				VF610_PAD_PTE17__DCU0_G4	0x1902
-				VF610_PAD_PTE18__DCU0_G5	0x1902
-				VF610_PAD_PTE19__DCU0_G6	0x1902
-				VF610_PAD_PTE20__DCU0_G7	0x1902
-				VF610_PAD_PTE21__DCU0_B0	0x1902
-				VF610_PAD_PTE22__DCU0_B1	0x1902
-				VF610_PAD_PTE23__DCU0_B2	0x1902
-				VF610_PAD_PTE24__DCU0_B3	0x1902
-				VF610_PAD_PTE25__DCU0_B4	0x1902
-				VF610_PAD_PTE26__DCU0_B5	0x1902
-				VF610_PAD_PTE27__DCU0_B6	0x1902
-				VF610_PAD_PTE28__DCU0_B7	0x1902
-			>;
-		};
-
-		pinctrl_dspi1: dspi1grp {
-			fsl,pins = <
-				VF610_PAD_PTD5__DSPI1_CS0		0x33e2
-				VF610_PAD_PTD6__DSPI1_SIN		0x33e1
-				VF610_PAD_PTD7__DSPI1_SOUT		0x33e2
-				VF610_PAD_PTD8__DSPI1_SCK		0x33e2
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
-				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
-				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
-				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
-				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
-				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
-				VF610_PAD_PTB20__GPIO_42	0x219d
-			>;
-		};
-
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				VF610_PAD_PTA6__RMII_CLKOUT		0x30d2
-				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
-				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
-				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
-				VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
-				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
-				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
-				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
-				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
-				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
-			>;
-		};
-
-		pinctrl_gpio_bl_on: gpio_bl_on {
-			fsl,pins = <
-				VF610_PAD_PTC0__GPIO_45		0x22ef
-			>;
-		};
-
-		pinctrl_i2c0: i2c0grp {
-			fsl,pins = <
-				VF610_PAD_PTB14__I2C0_SCL		0x37ff
-				VF610_PAD_PTB15__I2C0_SDA		0x37ff
-			>;
-		};
-
-		pinctrl_i2c0_gpio: i2c0gpiogrp {
-			fsl,pins = <
-				VF610_PAD_PTB14__GPIO_36		0x37ff
-				VF610_PAD_PTB15__GPIO_37		0x37ff
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				VF610_PAD_PTD23__NF_IO7		0x28df
-				VF610_PAD_PTD22__NF_IO6		0x28df
-				VF610_PAD_PTD21__NF_IO5		0x28df
-				VF610_PAD_PTD20__NF_IO4		0x28df
-				VF610_PAD_PTD19__NF_IO3		0x28df
-				VF610_PAD_PTD18__NF_IO2		0x28df
-				VF610_PAD_PTD17__NF_IO1		0x28df
-				VF610_PAD_PTD16__NF_IO0		0x28df
-				VF610_PAD_PTB24__NF_WE_B	0x28c2
-				VF610_PAD_PTB25__NF_CE0_B	0x28c2
-				VF610_PAD_PTB27__NF_RE_B	0x28c2
-				VF610_PAD_PTC26__NF_RB_B	0x283d
-				VF610_PAD_PTC27__NF_ALE		0x28c2
-				VF610_PAD_PTC28__NF_CLE		0x28c2
-			>;
-		};
-
-		pinctrl_pwm0: pwm0grp {
-			fsl,pins = <
-				VF610_PAD_PTB0__FTM0_CH0		0x1182
-				VF610_PAD_PTB1__FTM0_CH1		0x1182
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				VF610_PAD_PTB8__FTM1_CH0		0x1182
-				VF610_PAD_PTB9__FTM1_CH1		0x1182
-			>;
-		};
-
-		pinctrl_uart0: uart0grp {
-			fsl,pins = <
-				VF610_PAD_PTB10__UART0_TX		0x21a2
-				VF610_PAD_PTB11__UART0_RX		0x21a1
-				VF610_PAD_PTB12__UART0_RTS		0x21a2
-				VF610_PAD_PTB13__UART0_CTS		0x21a1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				VF610_PAD_PTB4__UART1_TX		0x21a2
-				VF610_PAD_PTB5__UART1_RX		0x21a1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				VF610_PAD_PTD0__UART2_TX		0x21a2
-				VF610_PAD_PTD1__UART2_RX		0x21a1
-				VF610_PAD_PTD2__UART2_RTS		0x21a2
-				VF610_PAD_PTD3__UART2_CTS		0x21a1
-			>;
-		};
-
-		pinctrl_usbh1_reg: gpio_usb_vbus {
-			fsl,pins = <
-				VF610_PAD_PTD4__GPIO_83			0x22ed
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi
deleted file mode 100644
index 8af7ed56e653..000000000000
--- a/arch/arm/boot/dts/vf500-colibri.dtsi
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2014-2020 Toradex
- */
-
-#include "vf500.dtsi"
-#include "vf-colibri.dtsi"
-
-/ {
-	model = "Toradex Colibri VF50 COM";
-	compatible = "toradex,vf500-colibri_vf50", "fsl,vf500";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>;
-	};
-
-	touchscreen: vf50-touchscreen {
-		compatible = "toradex,vf50-touchscreen";
-		io-channels = <&adc1 0>,<&adc0 0>,
-				<&adc0 1>,<&adc1 2>;
-		xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-		xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-		yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-		ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "idle","default","gpios";
-		pinctrl-0 = <&pinctrl_touchctrl_idle>;
-		pinctrl-1 = <&pinctrl_touchctrl_default>;
-		pinctrl-2 = <&pinctrl_touchctrl_gpios>;
-		vf50-ts-min-pressure = <200>;
-		status = "disabled";
-	};
-};
-
-&nfc {
-	assigned-clocks = <&clks VF610_CLK_NFC>;
-	assigned-clock-rates = <33000000>;
-};
-
-&iomuxc {
-	vf610-colibri {
-		pinctrl_touchctrl_idle: touchctrl_idle {
-			fsl,pins = <
-				VF610_PAD_PTA18__GPIO_8		0x006d
-				VF610_PAD_PTA19__GPIO_9		0x006c
-				>;
-		};
-
-		pinctrl_touchctrl_default: touchctrl_default {
-			fsl,pins = <
-				VF610_PAD_PTA18__ADC0_SE0	0x0040
-				VF610_PAD_PTA19__ADC0_SE1	0x0040
-				VF610_PAD_PTA16__ADC1_SE0	0x0040
-				VF610_PAD_PTB2__ADC1_SE2	0x0040
-				>;
-		};
-
-		pinctrl_touchctrl_gpios: touchctrl_gpios {
-			fsl,pins = <
-				VF610_PAD_PTA23__GPIO_13	0x22e9
-				VF610_PAD_PTB23__GPIO_93	0x22e9
-				VF610_PAD_PTA22__GPIO_12	0x22e9
-				VF610_PAD_PTA11__GPIO_4		0x22e9
-				>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts
deleted file mode 100644
index 703f375d7e24..000000000000
--- a/arch/arm/boot/dts/vf610-cosmic.dts
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- * Copyright 2013 Linaro Limited
- */
-
-/dts-v1/;
-#include "vf610.dtsi"
-
-/ {
-	model = "PHYTEC Cosmic/Cosmic+ Board";
-	compatible = "phytec,vf610-cosmic", "fsl,vf610";
-
-	chosen {
-		bootargs = "console=ttyLP1,115200";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-	enet_ext: enet_ext {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-	};
-};
-
-&clks {
-	clocks = <&sxosc>, <&fxosc>, <&enet_ext>;
-	clock-names = "sxosc", "fxosc", "enet_ext";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&fec1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&iomuxc {
-	vf610-cosmic {
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
-				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
-				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
-				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
-				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
-				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
-				VF610_PAD_PTB28__GPIO_98	0x219d
-			>;
-		};
-
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
-				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
-				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
-				VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
-				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
-				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
-				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
-				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
-				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				VF610_PAD_PTB4__UART1_TX		0x21a2
-				VF610_PAD_PTB5__UART1_RX		0x21a1
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
deleted file mode 100644
index dbb5ffcdcec4..000000000000
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ /dev/null
@@ -1,373 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright 2013 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-#include "vf610.dtsi"
-
-/ {
-	model = "VF610 Tower Board";
-	compatible = "fsl,vf610-twr", "fsl,vf610";
-
-	chosen {
-		bootargs = "console=ttyLP1,115200";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>;
-	};
-
-	audio_ext: mclk_osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	enet_ext: eth_osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_vcc_3v3_mcu: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vcc_3v3_mcu";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "Speaker Ext",
-			"Line", "Line In Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"Microphone Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"Speaker Ext", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai2>;
-			frame-master;
-			bitclock-master;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&codec>;
-			frame-master;
-			bitclock-master;
-		};
-	};
-};
-
-&adc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_ad5>;
-	vref-supply = <&reg_vcc_3v3_mcu>;
-	status = "okay";
-};
-
-&clks {
-	clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
-	clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
-	assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
-			  <&clks VF610_CLK_ENET_TS_SEL>;
-	assigned-clock-parents = <&clks VF610_CLK_ENET_EXT>,
-				 <&clks VF610_CLK_ENET_EXT>;
-};
-
-&dspi0 {
-	bus-num = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_dspi0>;
-	status = "okay";
-
-	sflash: at26df081a@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "atmel,at26df081a";
-		spi-max-frequency = <16000000>;
-		spi-cpol;
-		spi-cpha;
-		reg = <0>;
-	};
-};
-
-&edma0 {
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	bus-width = <4>;
-	cd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&fec0 {
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec0>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-		};
-	};
-};
-
-&fec1 {
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c0>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-	       #sound-dai-cells = <0>;
-	       compatible = "fsl,sgtl5000";
-	       reg = <0x0a>;
-	       VDDA-supply = <&reg_3p3v>;
-	       VDDIO-supply = <&reg_3p3v>;
-	       clocks = <&clks VF610_CLK_SAI2>;
-       };
-};
-
-&iomuxc {
-	vf610-twr {
-		pinctrl_adc0_ad5: adc0ad5grp {
-			fsl,pins = <
-				VF610_PAD_PTC30__ADC0_SE5		0xa1
-			>;
-		};
-
-		pinctrl_dspi0: dspi0grp {
-			fsl,pins = <
-				VF610_PAD_PTB19__DSPI0_CS0		0x1182
-				VF610_PAD_PTB20__DSPI0_SIN		0x1181
-				VF610_PAD_PTB21__DSPI0_SOUT		0x1182
-				VF610_PAD_PTB22__DSPI0_SCK		0x1182
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
-				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
-				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
-				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
-				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
-				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
-				VF610_PAD_PTA7__GPIO_134	0x219d
-			>;
-		};
-
-		pinctrl_fec0: fec0grp {
-			fsl,pins = <
-				VF610_PAD_PTA6__RMII_CLKIN		0x30d1
-				VF610_PAD_PTC0__ENET_RMII0_MDC		0x30d3
-				VF610_PAD_PTC1__ENET_RMII0_MDIO		0x30d1
-				VF610_PAD_PTC2__ENET_RMII0_CRS		0x30d1
-				VF610_PAD_PTC3__ENET_RMII0_RXD1		0x30d1
-				VF610_PAD_PTC4__ENET_RMII0_RXD0		0x30d1
-				VF610_PAD_PTC5__ENET_RMII0_RXER		0x30d1
-				VF610_PAD_PTC6__ENET_RMII0_TXD1		0x30d2
-				VF610_PAD_PTC7__ENET_RMII0_TXD0		0x30d2
-				VF610_PAD_PTC8__ENET_RMII0_TXEN		0x30d2
-			>;
-		};
-
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
-				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
-				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
-				VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
-				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
-				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
-				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
-				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
-				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
-			>;
-		};
-
-		pinctrl_i2c0: i2c0grp {
-			fsl,pins = <
-				VF610_PAD_PTB14__I2C0_SCL		0x30d3
-				VF610_PAD_PTB15__I2C0_SDA		0x30d3
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				VF610_PAD_PTD31__NF_IO15	0x28df
-				VF610_PAD_PTD30__NF_IO14	0x28df
-				VF610_PAD_PTD29__NF_IO13	0x28df
-				VF610_PAD_PTD28__NF_IO12	0x28df
-				VF610_PAD_PTD27__NF_IO11	0x28df
-				VF610_PAD_PTD26__NF_IO10	0x28df
-				VF610_PAD_PTD25__NF_IO9		0x28df
-				VF610_PAD_PTD24__NF_IO8		0x28df
-				VF610_PAD_PTD23__NF_IO7		0x28df
-				VF610_PAD_PTD22__NF_IO6		0x28df
-				VF610_PAD_PTD21__NF_IO5		0x28df
-				VF610_PAD_PTD20__NF_IO4		0x28df
-				VF610_PAD_PTD19__NF_IO3		0x28df
-				VF610_PAD_PTD18__NF_IO2		0x28df
-				VF610_PAD_PTD17__NF_IO1		0x28df
-				VF610_PAD_PTD16__NF_IO0		0x28df
-				VF610_PAD_PTB24__NF_WE_B	0x28c2
-				VF610_PAD_PTB25__NF_CE0_B	0x28c2
-				VF610_PAD_PTB27__NF_RE_B	0x28c2
-				VF610_PAD_PTC26__NF_RB_B	0x283d
-				VF610_PAD_PTC27__NF_ALE		0x28c2
-				VF610_PAD_PTC28__NF_CLE		0x28c2
-			>;
-		};
-
-		pinctrl_pwm0: pwm0grp {
-			fsl,pins = <
-				VF610_PAD_PTB0__FTM0_CH0		0x1582
-				VF610_PAD_PTB1__FTM0_CH1		0x1582
-				VF610_PAD_PTB2__FTM0_CH2		0x1582
-				VF610_PAD_PTB3__FTM0_CH3		0x1582
-			>;
-		};
-
-		pinctrl_sai2: sai2grp {
-			fsl,pins = <
-				VF610_PAD_PTA16__SAI2_TX_BCLK		0x02ed
-				VF610_PAD_PTA18__SAI2_TX_DATA		0x02ee
-				VF610_PAD_PTA19__SAI2_TX_SYNC		0x02ed
-				VF610_PAD_PTA21__SAI2_RX_BCLK		0x02ed
-				VF610_PAD_PTA22__SAI2_RX_DATA		0x02ed
-				VF610_PAD_PTA23__SAI2_RX_SYNC		0x02ed
-				VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x02ed
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				VF610_PAD_PTB4__UART1_TX		0x21a2
-				VF610_PAD_PTB5__UART1_RX		0x21a1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				VF610_PAD_PTB6__UART2_TX		0x21a2
-				VF610_PAD_PTB7__UART2_RX		0x21a1
-			>;
-		};
-	};
-};
-
-&nfc {
-	assigned-clocks = <&clks VF610_CLK_NFC>;
-	assigned-clock-rates = <33000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	status = "okay";
-
-	nand@0 {
-		compatible = "fsl,vf610-nfc-nandcs";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		nand-bus-width = <16>;
-		nand-ecc-mode = "hw";
-		nand-ecc-strength = <24>;
-		nand-ecc-step-size = <2048>;
-		nand-on-flash-bbt;
-	};
-};
-
-&pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0>;
-	status = "okay";
-};
-
-&sai2 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai2>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbdev0 {
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	status = "okay";
-};
-
-&usbmisc0 {
-	status = "okay";
-};
-
-&usbmisc1 {
-	status = "okay";
-};
-
-&usbphy0 {
-	status = "okay";
-};
-
-&usbphy1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/vt8500/Makefile b/arch/arm/boot/dts/vt8500/Makefile
new file mode 100644
index 000000000000..6fd29c41f366
--- /dev/null
+++ b/arch/arm/boot/dts/vt8500/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_VT8500) += \
+	vt8500-bv07.dtb \
+	wm8505-ref.dtb \
+	wm8650-mid.dtb \
+	wm8750-apc8750.dtb \
+	wm8850-w70v2.dtb \
+	wm8950-apc-rock.dtb
diff --git a/arch/arm/boot/dts/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500/vt8500-bv07.dts
index e9f55bd30bd4..c8c07c2b4acf 100644
--- a/arch/arm/boot/dts/vt8500-bv07.dts
+++ b/arch/arm/boot/dts/vt8500/vt8500-bv07.dts
@@ -10,13 +10,18 @@
 
 / {
 	model = "Benign BV07 Netbook";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
 };
 
 &fb {
 	bits-per-pixel = <16>;
 	display-timings {
 		native-mode = <&timing0>;
-		timing0: 800x480 {
+		timing0: timing-800x480 {
 			clock-frequency = <0>; /* unused but required */
 			hactive = <800>;
 			vactive = <480>;
diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500/vt8500.dtsi
index b7e09eff5bb2..9b87b1289792 100644
--- a/arch/arm/boot/dts/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500/vt8500.dtsi
@@ -11,20 +11,16 @@
 	compatible = "via,vt8500";
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,arm926ej-s";
+			reg = <0x0>;
 		};
 	};
 
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
 	aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
@@ -55,6 +51,11 @@
 			#gpio-cells = <2>;
 		};
 
+		chipid@d8120000 {
+			compatible = "via,vt8500-scc-id";
+			reg = <0xd8120000 0x4>;
+		};
+
 		pmc@d8130000 {
 			compatible = "via,vt8500-pmc";
 			reg = <0xd8130000 0x1000>;
@@ -106,22 +107,22 @@
 		timer@d8130100 {
 			compatible = "via,vt8500-timer";
 			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
+			interrupts = <36>, <37>, <38>, <39>;
 		};
 
-		ehci@d8007900 {
+		usb@d8007900 {
 			compatible = "via,vt8500-ehci";
 			reg = <0xd8007900 0x200>;
 			interrupts = <43>;
 		};
 
-		uhci@d8007b00 {
+		usb@d8007b00 {
 			compatible = "platform-uhci";
 			reg = <0xd8007b00 0x200>;
 			interrupts = <43>;
 		};
 
-		fb: fb@d8050800 {
+		fb: lcd-controller@d800e400 {
 			compatible = "via,vt8500-fb";
 			reg = <0xd800e400 0x400>;
 			interrupts = <12>;
diff --git a/arch/arm/boot/dts/wm8505-ref.dts b/arch/arm/boot/dts/vt8500/wm8505-ref.dts
index 2d77c087676e..d4ff99c70012 100644
--- a/arch/arm/boot/dts/wm8505-ref.dts
+++ b/arch/arm/boot/dts/vt8500/wm8505-ref.dts
@@ -10,13 +10,18 @@
 
 / {
 	model = "Wondermedia WM8505 Netbook";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
 };
 
 &fb {
 	bits-per-pixel = <32>;
 	display-timings {
 		native-mode = <&timing0>;
-		timing0: 800x480 {
+		timing0: timing-800x480 {
 			clock-frequency = <0>; /* unused but required */
 			hactive = <800>;
 			vactive = <480>;
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/vt8500/wm8505.dtsi
index 168cd12b07bc..915adbf6e1e0 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/vt8500/wm8505.dtsi
@@ -11,20 +11,16 @@
 	compatible = "wm,wm8505";
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,arm926ej-s";
+			reg = <0x0>;
 		};
 	};
 
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
  	aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
@@ -66,6 +62,11 @@
 			#gpio-cells = <2>;
 		};
 
+		chipid@d8120000 {
+			compatible = "via,vt8500-scc-id";
+			reg = <0xd8120000 0x4>;
+		};
+
 		pmc@d8130000 {
 			compatible = "via,vt8500-pmc";
 			reg = <0xd8130000 0x1000>;
@@ -204,16 +205,16 @@
 		timer@d8130100 {
 			compatible = "via,vt8500-timer";
 			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
+			interrupts = <36>, <37>, <38>, <39>;
 		};
 
-		ehci@d8007100 {
+		usb@d8007100 {
 			compatible = "via,vt8500-ehci";
 			reg = <0xd8007100 0x200>;
 			interrupts = <1>;
 		};
 
-		uhci@d8007300 {
+		usb@d8007300 {
 			compatible = "platform-uhci";
 			reg = <0xd8007300 0x200>;
 			interrupts = <0>;
@@ -283,7 +284,7 @@
 			interrupts = <48>;
 		};
 
-		sdhc@d800a000 {
+		mmc@d800a000 {
 			compatible = "wm,wm8505-sdhc";
 			reg = <0xd800a000 0x400>;
 			interrupts = <20>, <21>;
diff --git a/arch/arm/boot/dts/wm8650-mid.dts b/arch/arm/boot/dts/vt8500/wm8650-mid.dts
index f6a42149a0a0..bfc570e80073 100644
--- a/arch/arm/boot/dts/wm8650-mid.dts
+++ b/arch/arm/boot/dts/vt8500/wm8650-mid.dts
@@ -10,6 +10,11 @@
 
 / {
 	model = "Wondermedia WM8650-MID Tablet";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
 };
 
 &fb {
@@ -17,7 +22,7 @@
 
 	display-timings {
 		native-mode = <&timing0>;
-		timing0: 800x480 {
+		timing0: timing-800x480 {
 			clock-frequency = <0>; /* unused but required */
 			hactive = <800>;
 			vactive = <480>;
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/vt8500/wm8650.dtsi
index bc057b6f7d16..82eef7504364 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/vt8500/wm8650.dtsi
@@ -11,20 +11,16 @@
 	compatible = "wm,wm8650";
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,arm926ej-s";
+			reg = <0x0>;
 		};
 	};
 
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
  	aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
@@ -62,6 +58,11 @@
 			#gpio-cells = <2>;
 		};
 
+		chipid@d8120000 {
+			compatible = "via,vt8500-scc-id";
+			reg = <0xd8120000 0x4>;
+		};
+
 		pmc@d8130000 {
 			compatible = "via,vt8500-pmc";
 			reg = <0xd8130000 0x1000>;
@@ -176,22 +177,22 @@
 		timer@d8130100 {
 			compatible = "via,vt8500-timer";
 			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
+			interrupts = <36>, <37>, <38>, <39>;
 		};
 
-		ehci@d8007900 {
+		usb@d8007900 {
 			compatible = "via,vt8500-ehci";
 			reg = <0xd8007900 0x200>;
 			interrupts = <43>;
 		};
 
-		uhci@d8007b00 {
+		usb@d8007b00 {
 			compatible = "platform-uhci";
 			reg = <0xd8007b00 0x200>;
 			interrupts = <43>;
 		};
 
-		sdhc@d800a000 {
+		mmc@d800a000 {
 			compatible = "wm,wm8505-sdhc";
 			reg = <0xd800a000 0x400>;
 			interrupts = <20>, <21>;
diff --git a/arch/arm/boot/dts/wm8750-apc8750.dts b/arch/arm/boot/dts/vt8500/wm8750-apc8750.dts
index 136e812bc1e4..72d633bedff0 100644
--- a/arch/arm/boot/dts/wm8750-apc8750.dts
+++ b/arch/arm/boot/dts/vt8500/wm8750-apc8750.dts
@@ -11,6 +11,11 @@
 
 / {
 	model = "VIA APC8750";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
 };
 
 &pinctrl {
diff --git a/arch/arm/boot/dts/wm8750.dtsi b/arch/arm/boot/dts/vt8500/wm8750.dtsi
index 33aeb37491f4..5342b7fe4ef8 100644
--- a/arch/arm/boot/dts/wm8750.dtsi
+++ b/arch/arm/boot/dts/vt8500/wm8750.dtsi
@@ -11,20 +11,16 @@
 	compatible = "wm,wm8750";
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,arm1176jzf";
+			reg = <0x0>;
 		};
 	};
 
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
 	aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
@@ -68,6 +64,11 @@
 			#gpio-cells = <2>;
 		};
 
+		chipid@d8120000 {
+			compatible = "via,vt8500-scc-id";
+			reg = <0xd8120000 0x4>;
+		};
+
 		pmc@d8130000 {
 			compatible = "via,vt8500-pmc";
 			reg = <0xd8130000 0x1000>;
@@ -248,22 +249,22 @@
 		timer@d8130100 {
 			compatible = "via,vt8500-timer";
 			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
+			interrupts = <36>, <37>, <38>, <39>;
 		};
 
-		ehci@d8007900 {
+		usb@d8007900 {
 			compatible = "via,vt8500-ehci";
 			reg = <0xd8007900 0x200>;
 			interrupts = <26>;
 		};
 
-		uhci@d8007b00 {
+		usb@d8007b00 {
 			compatible = "platform-uhci";
 			reg = <0xd8007b00 0x200>;
 			interrupts = <26>;
 		};
 
-		uhci@d8008d00 {
+		usb@d8008d00 {
 			compatible = "platform-uhci";
 			reg = <0xd8008d00 0x200>;
 			interrupts = <26>;
@@ -323,7 +324,7 @@
 			interrupts = <48>;
 		};
 
-		sdhc@d800a000 {
+		mmc@d800a000 {
 			compatible = "wm,wm8505-sdhc";
 			reg = <0xd800a000 0x1000>;
 			interrupts = <20 21>;
diff --git a/arch/arm/boot/dts/wm8850-w70v2.dts b/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts
index c7a6fe0ce48f..eb16991a2ccc 100644
--- a/arch/arm/boot/dts/wm8850-w70v2.dts
+++ b/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts
@@ -22,13 +22,18 @@
 		brightness-levels = <0 40 60 80 100 130 190 255>;
 		default-brightness-level = <5>;
 	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
 };
 
 &fb {
 	bits-per-pixel = <16>;
 	display-timings {
 		native-mode = <&timing0>;
-		timing0: 800x480 {
+		timing0: timing-800x480 {
 			clock-frequency = <0>; /* unused but required */
 			hactive = <800>;
 			vactive = <480>;
diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/vt8500/wm8850.dtsi
index 65c9271050e6..58109aa05f74 100644
--- a/arch/arm/boot/dts/wm8850.dtsi
+++ b/arch/arm/boot/dts/vt8500/wm8850.dtsi
@@ -18,14 +18,10 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0x0>;
+			next-level-cache = <&l2_cache>;
 		};
 	};
 
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
 	aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
@@ -65,6 +61,11 @@
 			#gpio-cells = <2>;
 		};
 
+		chipid@d8120000 {
+			compatible = "via,vt8500-scc-id";
+			reg = <0xd8120000 0x4>;
+		};
+
 		pmc@d8130000 {
 			compatible = "via,vt8500-pmc";
 			reg = <0xd8130000 0x1000>;
@@ -235,22 +236,22 @@
 		timer@d8130100 {
 			compatible = "via,vt8500-timer";
 			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
+			interrupts = <36>, <37>, <38>, <39>;
 		};
 
-		ehci@d8007900 {
+		usb@d8007900 {
 			compatible = "via,vt8500-ehci";
 			reg = <0xd8007900 0x200>;
 			interrupts = <26>;
 		};
 
-		uhci@d8007b00 {
+		usb@d8007b00 {
 			compatible = "platform-uhci";
 			reg = <0xd8007b00 0x200>;
 			interrupts = <26>;
 		};
 
-		uhci@d8008d00 {
+		usb@d8008d00 {
 			compatible = "platform-uhci";
 			reg = <0xd8008d00 0x200>;
 			interrupts = <26>;
@@ -294,7 +295,7 @@
 			interrupts = <48>;
 		};
 
-		sdhc@d800a000 {
+		mmc@d800a000 {
 			compatible = "wm,wm8505-sdhc";
 			reg = <0xd800a000 0x1000>;
 			interrupts = <20 21>;
@@ -308,5 +309,18 @@
 			reg = <0xd8004000 0x100>;
 			interrupts = <10>;
                 };
+
+		l2_cache: cache-controller@d9000000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xd9000000 0x1000>;
+			arm,double-linefill = <1>;
+			arm,dynamic-clock-gating = <1>;
+			arm,shared-override;
+			arm,standby-mode = <1>;
+			cache-level = <2>;
+			cache-unified;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/vt8500/wm8950-apc-rock.dts b/arch/arm/boot/dts/vt8500/wm8950-apc-rock.dts
new file mode 100644
index 000000000000..58b3c8deb4f2
--- /dev/null
+++ b/arch/arm/boot/dts/vt8500/wm8950-apc-rock.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2025 Alexey Charkov <alchark@gmail.com>
+ */
+
+/dts-v1/;
+/include/ "wm8950.dtsi"
+
+/ {
+	model = "VIA APC Rock";
+	compatible = "via,apc-rock", "wm,wm8950";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/vt8500/wm8950.dtsi b/arch/arm/boot/dts/vt8500/wm8950.dtsi
new file mode 100644
index 000000000000..31fba05d3c3e
--- /dev/null
+++ b/arch/arm/boot/dts/vt8500/wm8950.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2025 Alexey Charkov <alchark@gmail.com>
+ */
+
+/* No differences have been discovered vs. WM8850, but chip markings differ */
+/include/ "wm8850.dtsi"
+
+/ {
+	compatible = "wm,wm8950";
+};
diff --git a/arch/arm/boot/dts/xen/Makefile b/arch/arm/boot/dts/xen/Makefile
new file mode 100644
index 000000000000..26c50f138952
--- /dev/null
+++ b/arch/arm/boot/dts/xen/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_VIRT) += \
+	xenvm-4.2.dtb
diff --git a/arch/arm/boot/dts/xenvm-4.2.dts b/arch/arm/boot/dts/xen/xenvm-4.2.dts
index 384cd92f1f84..384cd92f1f84 100644
--- a/arch/arm/boot/dts/xenvm-4.2.dts
+++ b/arch/arm/boot/dts/xen/xenvm-4.2.dts
diff --git a/arch/arm/boot/dts/xilinx/Makefile b/arch/arm/boot/dts/xilinx/Makefile
new file mode 100644
index 000000000000..9233e539b192
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ZYNQ) += \
+	zynq-cc108.dtb \
+	zynq-ebaz4205.dtb \
+	zynq-microzed.dtb \
+	zynq-parallella.dtb \
+	zynq-zc702.dtb \
+	zynq-zc706.dtb \
+	zynq-zc770-xm010.dtb \
+	zynq-zc770-xm011.dtb \
+	zynq-zc770-xm012.dtb \
+	zynq-zc770-xm013.dtb \
+	zynq-zed.dtb \
+	zynq-zturn.dtb \
+	zynq-zturn-v5.dtb \
+	zynq-zybo.dtb \
+	zynq-zybo-z7.dtb
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/xilinx/zynq-7000.dtsi
index c193264a86ff..153b8d93cbee 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/xilinx/zynq-7000.dtsi
@@ -8,6 +8,13 @@
 	#size-cells = <1>;
 	compatible = "xlnx,zynq-7000";
 
+	options {
+		u-boot {
+			compatible = "u-boot,config";
+			bootscr-address = /bits/ 64 <0x3000000>;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -34,7 +41,7 @@
 		};
 	};
 
-	fpga_full: fpga-full {
+	fpga_full: fpga-region {
 		compatible = "fpga-region";
 		fpga-mgr = <&devcfg>;
 		#address-cells = <1>;
@@ -93,6 +100,7 @@
 	};
 
 	amba: axi {
+		bootph-all;
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -149,6 +157,7 @@
 			clocks = <&clkc 38>;
 			interrupt-parent = <&intc>;
 			interrupts = <0 25 4>;
+			clock-frequency = <400000>;
 			reg = <0xe0004000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -160,6 +169,7 @@
 			clocks = <&clkc 39>;
 			interrupt-parent = <&intc>;
 			interrupts = <0 48 4>;
+			clock-frequency = <400000>;
 			reg = <0xe0005000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -188,6 +198,17 @@
 			reg = <0xf8006000 0x1000>;
 		};
 
+		ocm: sram@fffc0000 {
+			compatible = "mmio-sram";
+			reg = <0xfffc0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xfffc0000 0x10000>;
+			ocm-sram@0 {
+				reg = <0x0 0x10000>;
+			};
+		};
+
 		uart0: serial@e0000000 {
 			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
 			status = "disabled";
@@ -230,8 +251,20 @@
 			#size-cells = <0>;
 		};
 
+		qspi: spi@e000d000 {
+			compatible = "xlnx,zynq-qspi-1.0";
+			reg = <0xe000d000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 19 4>;
+			clocks = <&clkc 10>, <&clkc 43>;
+			clock-names = "ref_clk", "pclk";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		gem0: ethernet@e000b000 {
-			compatible = "cdns,zynq-gem", "cdns,gem";
+			compatible = "xlnx,zynq-gem", "cdns,gem";
 			reg = <0xe000b000 0x1000>;
 			status = "disabled";
 			interrupts = <0 22 4>;
@@ -242,7 +275,7 @@
 		};
 
 		gem1: ethernet@e000c000 {
-			compatible = "cdns,zynq-gem", "cdns,gem";
+			compatible = "xlnx,zynq-gem", "cdns,gem";
 			reg = <0xe000c000 0x1000>;
 			status = "disabled";
 			interrupts = <0 45 4>;
@@ -263,13 +296,18 @@
 				  0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
 			#address-cells = <2>;
 			#size-cells = <1>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 18 4>;
 
 			nfc0: nand-controller@0,0 {
 				compatible = "arm,pl353-nand-r2p1";
 				reg = <0 0 0x1000000>;
 				status = "disabled";
-				#address-cells = <1>;
-				#size-cells = <0>;
+			};
+			nor0: flash@1,0 {
+				status = "disabled";
+				compatible = "cfi-flash";
+				reg = <1 0 0x2000000>;
 			};
 		};
 
@@ -294,12 +332,14 @@
 		};
 
 		slcr: slcr@f8000000 {
+			bootph-all;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
 			reg = <0xF8000000 0x1000>;
 			ranges;
 			clkc: clkc@100 {
+				bootph-all;
 				#clock-cells = <1>;
 				compatible = "xlnx,ps7-clkc";
 				fclk-enable = <0>;
@@ -331,12 +371,14 @@
 			};
 		};
 
-		dmac_s: dmac@f8003000 {
+		dmac_s: dma-controller@f8003000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0xf8003000 0x1000>;
 			interrupt-parent = <&intc>;
-			interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
-				"dma4", "dma5", "dma6", "dma7";
+			/*
+			 * interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
+			 * "dma4", "dma5", "dma6", "dma7";
+			 */
 			interrupts = <0 13 4>,
 			             <0 14 4>, <0 15 4>,
 			             <0 16 4>, <0 17 4>,
@@ -382,6 +424,7 @@
 		};
 
 		scutimer: timer@f8f00600 {
+			bootph-all;
 			interrupt-parent = <&intc>;
 			interrupts = <1 13 0x301>;
 			compatible = "arm,cortex-a9-twd-timer";
diff --git a/arch/arm/boot/dts/xilinx/zynq-cc108.dts b/arch/arm/boot/dts/xilinx/zynq-cc108.dts
new file mode 100644
index 000000000000..f5525c048426
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-cc108.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx CC108 board DTS
+ *
+ * (C) Copyright 2007-2018 Xilinx, Inc.
+ * (C) Copyright 2007-2013 Michal Simek
+ * (C) Copyright 2007-2012 PetaLogix Qld Pty Ltd
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx CC108 board";
+	compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart0;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	usb_phy1: phy1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	num-cs = <1>;
+	flash@0 { /* 16 MB */
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "qspi-fsbl-uboot-bs";
+			reg = <0x0 0x400000>; /* 4MB */
+		};
+		partition@400000 {
+			label = "qspi-linux";
+			reg = <0x400000 0x400000>; /* 4MB */
+		};
+		partition@800000 {
+			label = "qspi-rootfs";
+			reg = <0x800000 0x400000>; /* 4MB */
+		};
+		partition@c00000 {
+			label = "qspi-devicetree";
+			reg = <0xc00000 0x100000>; /* 1MB */
+		};
+		partition@d00000 {
+			label = "qspi-scratch";
+			reg = <0xd00000 0x200000>; /* 2MB */
+		};
+		partition@f00000 {
+			label = "qspi-uboot-env";
+			reg = <0xf00000 0x100000>; /* 1MB */
+		};
+	};
+};
+
+&sdhci1 {
+	status = "okay";
+	broken-cd ;
+	wp-inverted ;
+};
+
+&uart0 {
+	bootph-all;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy1>;
+};
diff --git a/arch/arm/boot/dts/zynq-ebaz4205.dts b/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts
index 53fa6dbfd8fd..14f644156a6f 100644
--- a/arch/arm/boot/dts/zynq-ebaz4205.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts
@@ -51,6 +51,8 @@
 &nfc0 {
 	status = "okay";
 
+	#address-cells = <1>;
+	#size-cells = <0>;
 	nand@0 {
 		reg = <0>;
 	};
diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/xilinx/zynq-microzed.dts
index 6ed84fb15902..68b867e8369e 100644
--- a/arch/arm/boot/dts/zynq-microzed.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-microzed.dts
@@ -11,8 +11,9 @@
 	compatible = "avnet,zynq-microzed", "xlnx,zynq-microzed", "xlnx,zynq-7000";
 
 	aliases {
-		ethernet0 = &gem0;
 		serial0 = &uart1;
+		spi0 = &qspi;
+		mmc0 = &sdhci0;
 	};
 
 	memory@0 {
@@ -35,6 +36,11 @@
 	ps-clk-frequency = <33333333>;
 };
 
+&qspi {
+	bootph-all;
+	status = "okay";
+};
+
 &gem0 {
 	status = "okay";
 	phy-mode = "rgmii-id";
@@ -46,10 +52,12 @@
 };
 
 &sdhci0 {
+	bootph-all;
 	status = "okay";
 };
 
 &uart1 {
+	bootph-all;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/xilinx/zynq-parallella.dts
index 54592aeb92b9..366af4fcf8d9 100644
--- a/arch/arm/boot/dts/zynq-parallella.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-parallella.dts
@@ -46,7 +46,6 @@
 		compatible = "ethernet-phy-id0141.0e90",
 		             "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
-		device_type = "ethernet-phy";
 		marvell,reg-init = <0x3 0x10 0xff00 0x1e>,
 		                   <0x3 0x11 0xfff0 0xa>;
 	};
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/xilinx/zynq-zc702.dts
index d23201ba8cd7..6955637c5b1a 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zc702.dts
@@ -5,6 +5,7 @@
  */
 /dts-v1/;
 #include "zynq-7000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Xilinx ZC702 board";
@@ -14,7 +15,10 @@
 		ethernet0 = &gem0;
 		i2c0 = &i2c0;
 		serial0 = &uart1;
+		spi0 = &qspi;
 		mmc0 = &sdhci0;
+		nvmem0 = &eeprom;
+		rtc0 = &rtc;
 	};
 
 	memory@0 {
@@ -62,19 +66,6 @@
 	};
 };
 
-&amba {
-	ocm: sram@fffc0000 {
-		compatible = "mmio-sram";
-		reg = <0xfffc0000 0x10000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xfffc0000 0x10000>;
-		ocm-sram@0 {
-			reg = <0x0 0x10000>;
-		};
-	};
-};
-
 &can0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -94,7 +85,6 @@
 
 	ethernet_phy: ethernet-phy@7 {
 		reg = <7>;
-		device_type = "ethernet-phy";
 	};
 };
 
@@ -106,8 +96,11 @@
 &i2c0 {
 	status = "okay";
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio0 50 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio0 51 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	i2c-mux@74 {
 		compatible = "nxp,pca9548";
@@ -148,7 +141,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			eeprom@54 {
+			eeprom: eeprom@54 {
 				compatible = "atmel,24c08";
 				reg = <0x54>;
 			};
@@ -170,7 +163,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
-			rtc@51 {
+			rtc: rtc@51 {
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;
 			};
@@ -206,7 +199,7 @@
 		conf {
 			groups = "can0_9_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
@@ -229,7 +222,7 @@
 		conf {
 			groups = "ethernet0_0_grp";
 			slew-rate = <0>;
-			io-standard = <4>;
+			power-source = <4>;
 		};
 
 		conf-rx {
@@ -252,7 +245,7 @@
 		conf-mdio {
 			groups = "mdio0_0_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 			bias-disable;
 		};
 	};
@@ -270,7 +263,7 @@
 				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
 				 "gpio0_13_grp", "gpio0_14_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-pull-up {
@@ -294,7 +287,20 @@
 			groups = "i2c0_10_grp";
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio-grp {
+		mux {
+			groups = "gpio0_50_grp", "gpio0_51_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_50_grp", "gpio0_51_grp";
+			slew-rate = <0>;
+			power-source = <1>;
 		};
 	};
 
@@ -307,7 +313,7 @@
 		conf {
 			groups = "sdio0_2_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 			bias-disable;
 		};
 
@@ -321,7 +327,7 @@
 			bias-high-impedance;
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		mux-wp {
@@ -334,7 +340,7 @@
 			bias-high-impedance;
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 	};
 
@@ -347,7 +353,7 @@
 		conf {
 			groups = "uart1_10_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
@@ -370,7 +376,7 @@
 		conf {
 			groups = "usb0_0_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
@@ -386,13 +392,53 @@
 	};
 };
 
+&qspi {
+	bootph-all;
+	status = "okay";
+	num-cs = <1>;
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "qspi-fsbl-uboot";
+				reg = <0x0 0x100000>;
+			};
+			partition@100000 {
+				label = "qspi-linux";
+				reg = <0x100000 0x500000>;
+			};
+			partition@600000 {
+				label = "qspi-device-tree";
+				reg = <0x600000 0x20000>;
+			};
+			partition@620000 {
+				label = "qspi-rootfs";
+				reg = <0x620000 0x5e0000>;
+			};
+			partition@c00000 {
+				label = "qspi-bitstream";
+				reg = <0xc00000 0x400000>;
+			};
+		};
+	};
+};
+
 &sdhci0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdhci0_default>;
 };
 
 &uart1 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_default>;
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/xilinx/zynq-zc706.dts
index 77943c16d33f..3b803c698473 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zc706.dts
@@ -14,7 +14,10 @@
 		ethernet0 = &gem0;
 		i2c0 = &i2c0;
 		serial0 = &uart1;
+		spi0 = &qspi;
 		mmc0 = &sdhci0;
+		nvmem0 = &eeprom;
+		rtc0 = &rtc;
 	};
 
 	memory@0 {
@@ -46,7 +49,6 @@
 
 	ethernet_phy: ethernet-phy@7 {
 		reg = <7>;
-		device_type = "ethernet-phy";
 	};
 };
 
@@ -100,7 +102,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			eeprom@54 {
+			eeprom: eeprom@54 {
 				compatible = "atmel,24c08";
 				reg = <0x54>;
 			};
@@ -122,7 +124,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
-			rtc@51 {
+			rtc: rtc@51 {
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;
 			};
@@ -150,7 +152,7 @@
 		conf {
 			groups = "ethernet0_0_grp";
 			slew-rate = <0>;
-			io-standard = <4>;
+			power-source = <4>;
 		};
 
 		conf-rx {
@@ -173,7 +175,7 @@
 		conf-mdio {
 			groups = "mdio0_0_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 			bias-disable;
 		};
 	};
@@ -187,7 +189,7 @@
 		conf {
 			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-pull-up {
@@ -211,7 +213,7 @@
 			groups = "i2c0_10_grp";
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 	};
 
@@ -224,7 +226,7 @@
 		conf {
 			groups = "sdio0_2_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 			bias-disable;
 		};
 
@@ -238,7 +240,7 @@
 			bias-high-impedance;
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		mux-wp {
@@ -251,7 +253,7 @@
 			bias-high-impedance;
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 	};
 
@@ -264,7 +266,7 @@
 		conf {
 			groups = "uart1_10_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
@@ -287,7 +289,7 @@
 		conf {
 			groups = "usb0_0_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
@@ -303,13 +305,54 @@
 	};
 };
 
+&qspi {
+	bootph-all;
+	status = "okay";
+	num-cs = <2>;
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>, <1>;
+		parallel-memories = /bits/ 64 <0x1000000 0x1000000>; /* 16MB */
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "qspi-fsbl-uboot";
+				reg = <0x0 0x100000>;
+			};
+			partition@100000 {
+				label = "qspi-linux";
+				reg = <0x100000 0x500000>;
+			};
+			partition@600000 {
+				label = "qspi-device-tree";
+				reg = <0x600000 0x20000>;
+			};
+			partition@620000 {
+				label = "qspi-rootfs";
+				reg = <0x620000 0x5e0000>;
+			};
+			partition@c00000 {
+				label = "qspi-bitstream";
+				reg = <0xc00000 0x400000>;
+			};
+		};
+	};
+};
+
 &sdhci0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdhci0_default>;
 };
 
 &uart1 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_default>;
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts
new file mode 100644
index 000000000000..5fe799c3c7cf
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM010 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC770 XM010 board";
+	compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
+		serial0 = &uart1;
+		spi0 = &qspi;
+		spi1 = &spi1;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	num-cs = <1>;
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "qspi-fsbl-uboot";
+				reg = <0x0 0x100000>;
+			};
+			partition@100000 {
+				label = "qspi-linux";
+				reg = <0x100000 0x500000>;
+			};
+			partition@600000 {
+				label = "qspi-device-tree";
+				reg = <0x600000 0x20000>;
+			};
+			partition@620000 {
+				label = "qspi-rootfs";
+				reg = <0x620000 0x5e0000>;
+			};
+			partition@c00000 {
+				label = "qspi-bitstream";
+				reg = <0xc00000 0x400000>;
+			};
+		};
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+	flash@1 {
+		compatible = "sst25wf080", "jedec,spi-nor";
+		reg = <1>;
+		spi-max-frequency = <1000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "data";
+				reg = <0x0 0x100000>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	bootph-all;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts
new file mode 100644
index 000000000000..f9a086fe66d3
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM011 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC770 XM011 board";
+	compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000";
+
+	aliases {
+		i2c0 = &i2c1;
+		serial0 = &uart1;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	usb_phy1: phy1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+};
+
+&nfc0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	nand@0 {
+		reg = <0>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "nand-fsbl-uboot";
+				reg = <0x0 0x1000000>;
+			};
+			partition@1000000 {
+				label = "nand-linux";
+				reg = <0x1000000 0x2000000>;
+			};
+			partition@3000000 {
+				label = "nand-rootfs";
+				reg = <0x3000000 0x200000>;
+			};
+		};
+	};
+};
+
+&smcc {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+};
+
+&uart1 {
+	bootph-all;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy1>;
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts
new file mode 100644
index 000000000000..24520e7d3965
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM012 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC770 XM012 board";
+	compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &uart1;
+		spi0 = &spi1;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom0: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom1: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+};
+
+&nor0 {
+	status = "okay";
+	bank-width = <1>;
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "nor-fsbl-uboot";
+			reg = <0x0 0x100000>;
+		};
+		partition@100000 {
+			label = "nor-linux";
+			reg = <0x100000 0x500000>;
+		};
+		partition@600000 {
+			label = "nor-device-tree";
+			reg = <0x600000 0x20000>;
+		};
+		partition@620000 {
+			label = "nor-rootfs";
+			reg = <0x620000 0x5e0000>;
+		};
+		partition@c00000 {
+			label = "nor-bitstream";
+			reg = <0xc00000 0x400000>;
+		};
+	};
+};
+
+&smcc {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+};
+
+&uart1 {
+	bootph-all;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts
new file mode 100644
index 000000000000..103e87ea7253
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM013 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC770 XM013 board";
+	compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem1;
+		i2c0 = &i2c1;
+		serial0 = &uart0;
+		spi0 = &qspi;
+		spi1 = &spi0;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&gem1 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	si570: clock-generator@55 {
+		#clock-cells = <0>;
+		compatible = "silabs,si570";
+		temperature-stability = <50>;
+		reg = <0x55>;
+		factory-fout = <156250000>;
+		clock-frequency = <148500000>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	num-cs = <2>;
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>, <1>;
+		parallel-memories = /bits/ 64 <0x1000000 0x1000000>; /* 16MB */
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "qspi-fsbl-uboot";
+				reg = <0x0 0x100000>;
+			};
+			partition@100000 {
+				label = "qspi-linux";
+				reg = <0x100000 0x500000>;
+			};
+			partition@600000 {
+				label = "qspi-device-tree";
+				reg = <0x600000 0x20000>;
+			};
+			partition@620000 {
+				label = "qspi-rootfs";
+				reg = <0x620000 0x5e0000>;
+			};
+			partition@c00000 {
+				label = "qspi-bitstream";
+				reg = <0xc00000 0x400000>;
+			};
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+	eeprom: eeprom@2 {
+		compatible = "atmel,at25";
+		reg = <2>;
+		spi-max-frequency = <1000000>;
+		size = <8192>;
+		address-width = <16>;
+		pagesize = <32>;
+	};
+};
+
+&uart0 {
+	bootph-all;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zed.dts b/arch/arm/boot/dts/xilinx/zynq-zed.dts
new file mode 100644
index 000000000000..52ba569b2b9f
--- /dev/null
+++ b/arch/arm/boot/dts/xilinx/zynq-zed.dts
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Avnet ZedBoard board";
+	compatible = "avnet,zynq-zed", "xlnx,zynq-zed", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+		spi0 = &qspi;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&qspi {
+	bootph-all;
+	status = "okay";
+	num-cs = <1>;
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "qspi-fsbl-uboot";
+				reg = <0x0 0x100000>;
+			};
+			partition@100000 {
+				label = "qspi-linux";
+				reg = <0x100000 0x500000>;
+			};
+			partition@600000 {
+				label = "qspi-device-tree";
+				reg = <0x600000 0x20000>;
+			};
+			partition@620000 {
+				label = "qspi-rootfs";
+				reg = <0x620000 0x5e0000>;
+			};
+			partition@c00000 {
+				label = "qspi-bitstream";
+				reg = <0xc00000 0x400000>;
+			};
+		};
+	};
+};
+
+&sdhci0 {
+	bootph-all;
+	status = "okay";
+};
+
+&uart1 {
+	bootph-all;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
diff --git a/arch/arm/boot/dts/zynq-zturn-common.dtsi b/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
index dfb1fbafe3aa..defef9c8da13 100644
--- a/arch/arm/boot/dts/zynq-zturn-common.dtsi
+++ b/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
@@ -63,6 +63,11 @@
 	ps-clk-frequency = <33333333>;
 };
 
+&qspi {
+	bootph-all;
+	status = "okay";
+};
+
 &gem0 {
 	status = "okay";
 	phy-mode = "rgmii-id";
@@ -73,14 +78,17 @@
 };
 
 &sdhci0 {
+	bootph-all;
 	status = "okay";
 };
 
 &uart0 {
+	bootph-all;
 	status = "okay";
 };
 
 &uart1 {
+	bootph-all;
 	status = "okay";
 };
 
@@ -97,9 +105,9 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	stlm75@49 {
+	temperature-sensor@49 {
 		status = "okay";
-		compatible = "lm75";
+		compatible = "st,stlm75";
 		reg = <0x49>;
 	};
 
diff --git a/arch/arm/boot/dts/zynq-zturn-v5.dts b/arch/arm/boot/dts/xilinx/zynq-zturn-v5.dts
index 536632a09a25..536632a09a25 100644
--- a/arch/arm/boot/dts/zynq-zturn-v5.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zturn-v5.dts
diff --git a/arch/arm/boot/dts/zynq-zturn.dts b/arch/arm/boot/dts/xilinx/zynq-zturn.dts
index 620b24a25e06..620b24a25e06 100644
--- a/arch/arm/boot/dts/zynq-zturn.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zturn.dts
diff --git a/arch/arm/boot/dts/zynq-zybo-z7.dts b/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts
index 7b87e10d3953..56b917eec783 100644
--- a/arch/arm/boot/dts/zynq-zybo-z7.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts
@@ -10,6 +10,8 @@
 	aliases {
 		ethernet0 = &gem0;
 		serial0 = &uart1;
+		spi0 = &qspi;
+		mmc0 = &sdhci0;
 	};
 
 	memory@0 {
@@ -49,15 +51,21 @@
 
 	ethernet_phy: ethernet-phy@0 {
 		reg = <0>;
-		device_type = "ethernet-phy";
 	};
 };
 
+&qspi {
+	bootph-all;
+	status = "okay";
+};
+
 &sdhci0 {
+	bootph-all;
 	status = "okay";
 };
 
 &uart1 {
+	bootph-all;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/xilinx/zynq-zybo.dts
index 755f6f109d5a..fbc7d1b12e94 100644
--- a/arch/arm/boot/dts/zynq-zybo.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zybo.dts
@@ -13,6 +13,7 @@
 	aliases {
 		ethernet0 = &gem0;
 		serial0 = &uart1;
+		spi0 = &qspi;
 		mmc0 = &sdhci0;
 	};
 
@@ -44,15 +45,21 @@
 
 	ethernet_phy: ethernet-phy@0 {
 		reg = <0>;
-		device_type = "ethernet-phy";
 	};
 };
 
+&qspi {
+	bootph-all;
+	status = "okay";
+};
+
 &sdhci0 {
+	bootph-all;
 	status = "okay";
 };
 
 &uart1 {
+	bootph-all;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/zynq-cc108.dts b/arch/arm/boot/dts/zynq-cc108.dts
deleted file mode 100644
index 8b9ab9bba23b..000000000000
--- a/arch/arm/boot/dts/zynq-cc108.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Xilinx CC108 board DTS
- *
- * (C) Copyright 2007-2018 Xilinx, Inc.
- * (C) Copyright 2007-2013 Michal Simek
- * (C) Copyright 2007-2012 PetaLogix Qld Pty Ltd
- *
- * Michal SIMEK <monstr@monstr.eu>
- */
-/dts-v1/;
-/include/ "zynq-7000.dtsi"
-
-/ {
-	model = "Xilinx CC108 board";
-	compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000";
-
-	aliases {
-		ethernet0 = &gem0;
-		serial0 = &uart0;
-	};
-
-	chosen {
-		bootargs = "";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x20000000>;
-	};
-
-	usb_phy0: phy0 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-
-	usb_phy1: phy1 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-};
-
-&gem0 {
-	status = "okay";
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethernet_phy>;
-
-	ethernet_phy: ethernet-phy@1 {
-		reg = <1>;
-		device_type = "ethernet-phy";
-	};
-};
-
-&sdhci1 {
-	status = "okay";
-	broken-cd ;
-	wp-inverted ;
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-	usb-phy = <&usb_phy0>;
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-	usb-phy = <&usb_phy1>;
-};
diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts
deleted file mode 100644
index 0dd352289a45..000000000000
--- a/arch/arm/boot/dts/zynq-zc770-xm010.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Xilinx ZC770 XM010 board DTS
- *
- * Copyright (C) 2013-2018 Xilinx, Inc.
- */
-/dts-v1/;
-#include "zynq-7000.dtsi"
-
-/ {
-	model = "Xilinx ZC770 XM010 board";
-	compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
-
-	aliases {
-		ethernet0 = &gem0;
-		i2c0 = &i2c0;
-		serial0 = &uart1;
-		spi1 = &spi1;
-	};
-
-	chosen {
-		bootargs = "";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x40000000>;
-	};
-
-	usb_phy0: phy0 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-};
-
-&can0 {
-	status = "okay";
-};
-
-&gem0 {
-	status = "okay";
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethernet_phy>;
-
-	ethernet_phy: ethernet-phy@7 {
-		reg = <7>;
-		device_type = "ethernet-phy";
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	eeprom: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-	};
-
-};
-
-&sdhci0 {
-	status = "okay";
-};
-
-&spi1 {
-	status = "okay";
-	num-cs = <4>;
-	is-decoded-cs = <0>;
-	flash@1 {
-		compatible = "sst25wf080", "jedec,spi-nor";
-		reg = <1>;
-		spi-max-frequency = <1000000>;
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "data";
-				reg = <0x0 0x100000>;
-			};
-		};
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-	usb-phy = <&usb_phy0>;
-};
diff --git a/arch/arm/boot/dts/zynq-zc770-xm011.dts b/arch/arm/boot/dts/zynq-zc770-xm011.dts
deleted file mode 100644
index 56732e8f6ca1..000000000000
--- a/arch/arm/boot/dts/zynq-zc770-xm011.dts
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Xilinx ZC770 XM011 board DTS
- *
- * Copyright (C) 2013-2018 Xilinx, Inc.
- */
-/dts-v1/;
-#include "zynq-7000.dtsi"
-
-/ {
-	model = "Xilinx ZC770 XM011 board";
-	compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000";
-
-	aliases {
-		i2c0 = &i2c1;
-		serial0 = &uart1;
-		spi0 = &spi0;
-	};
-
-	chosen {
-		bootargs = "";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x40000000>;
-	};
-
-	usb_phy1: phy1 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-};
-
-&can0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	eeprom: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-	};
-};
-
-&spi0 {
-	status = "okay";
-	num-cs = <4>;
-	is-decoded-cs = <0>;
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-	usb-phy = <&usb_phy1>;
-};
diff --git a/arch/arm/boot/dts/zynq-zc770-xm012.dts b/arch/arm/boot/dts/zynq-zc770-xm012.dts
deleted file mode 100644
index d2359b789eb8..000000000000
--- a/arch/arm/boot/dts/zynq-zc770-xm012.dts
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Xilinx ZC770 XM012 board DTS
- *
- * Copyright (C) 2013-2018 Xilinx, Inc.
- */
-/dts-v1/;
-#include "zynq-7000.dtsi"
-
-/ {
-	model = "Xilinx ZC770 XM012 board";
-	compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000";
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		serial0 = &uart1;
-		spi0 = &spi1;
-	};
-
-	chosen {
-		bootargs = "";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x40000000>;
-	};
-};
-
-&can1 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	eeprom0: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	eeprom1: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-	};
-};
-
-&spi1 {
-	status = "okay";
-	num-cs = <4>;
-	is-decoded-cs = <0>;
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts
deleted file mode 100644
index 38d96adc870c..000000000000
--- a/arch/arm/boot/dts/zynq-zc770-xm013.dts
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Xilinx ZC770 XM013 board DTS
- *
- * Copyright (C) 2013 Xilinx, Inc.
- */
-/dts-v1/;
-#include "zynq-7000.dtsi"
-
-/ {
-	model = "Xilinx ZC770 XM013 board";
-	compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
-
-	aliases {
-		ethernet0 = &gem1;
-		i2c0 = &i2c1;
-		serial0 = &uart0;
-		spi1 = &spi0;
-	};
-
-	chosen {
-		bootargs = "";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x40000000>;
-	};
-};
-
-&can1 {
-	status = "okay";
-};
-
-&gem1 {
-	status = "okay";
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethernet_phy>;
-
-	ethernet_phy: ethernet-phy@7 {
-		reg = <7>;
-		device_type = "ethernet-phy";
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	si570: clock-generator@55 {
-		#clock-cells = <0>;
-		compatible = "silabs,si570";
-		temperature-stability = <50>;
-		reg = <0x55>;
-		factory-fout = <156250000>;
-		clock-frequency = <148500000>;
-	};
-};
-
-&spi0 {
-	status = "okay";
-	num-cs = <4>;
-	is-decoded-cs = <0>;
-	eeprom: eeprom@2 {
-		compatible = "atmel,at25";
-		reg = <2>;
-		spi-max-frequency = <1000000>;
-		size = <8192>;
-		address-width = <16>;
-		pagesize = <32>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts
deleted file mode 100644
index 6a5a93aa6552..000000000000
--- a/arch/arm/boot/dts/zynq-zed.dts
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *  Copyright (C) 2011 - 2014 Xilinx
- *  Copyright (C) 2012 National Instruments Corp.
- */
-/dts-v1/;
-#include "zynq-7000.dtsi"
-
-/ {
-	model = "Avnet ZedBoard board";
-	compatible = "avnet,zynq-zed", "xlnx,zynq-zed", "xlnx,zynq-7000";
-
-	aliases {
-		ethernet0 = &gem0;
-		serial0 = &uart1;
-		mmc0 = &sdhci0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "";
-		stdout-path = "serial0:115200n8";
-	};
-
-	usb_phy0: phy0 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-};
-
-&clkc {
-	ps-clk-frequency = <33333333>;
-};
-
-&gem0 {
-	status = "okay";
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethernet_phy>;
-
-	ethernet_phy: ethernet-phy@0 {
-		reg = <0>;
-		device_type = "ethernet-phy";
-	};
-};
-
-&sdhci0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-	usb-phy = <&usb_phy0>;
-};
diff --git a/arch/arm/boot/install.sh b/arch/arm/boot/install.sh
index 9ec11fac7d8d..34e2c6e31fd1 100755
--- a/arch/arm/boot/install.sh
+++ b/arch/arm/boot/install.sh
@@ -17,6 +17,8 @@
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
 
+set -e
+
 if [ "$(basename $2)" = "zImage" ]; then
 # Compressed install
   echo "Installing compressed kernel"
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 7bae8cbaafe7..9733381074e0 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -13,7 +13,5 @@ obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
 obj-$(CONFIG_CPU_V7)		+= secure_cntvoff.o
 obj-$(CONFIG_MCPM)		+= mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
 CFLAGS_REMOVE_mcpm_entry.o	= -pg
-AFLAGS_mcpm_head.o		:= -march=armv7-a
-AFLAGS_vlock.o			:= -march=armv7-a
 obj-$(CONFIG_BL_SWITCHER)	+= bL_switcher.o
 obj-$(CONFIG_BL_SWITCHER_DUMMY_IF) += bL_switcher_dummy_if.o
diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c
index 9a9aa53547a6..d1e82a318e3b 100644
--- a/arch/arm/common/bL_switcher.c
+++ b/arch/arm/common/bL_switcher.c
@@ -307,13 +307,11 @@ static struct task_struct *bL_switcher_thread_create(int cpu, void *arg)
 {
 	struct task_struct *task;
 
-	task = kthread_create_on_node(bL_switcher_thread, arg,
-				      cpu_to_node(cpu), "kswitcher_%d", cpu);
-	if (!IS_ERR(task)) {
-		kthread_bind(task, cpu);
-		wake_up_process(task);
-	} else
+	task = kthread_run_on_cpu(bL_switcher_thread, arg,
+				  cpu, "kswitcher_%d");
+	if (IS_ERR(task))
 		pr_err("%s failed for CPU %d\n", __func__, cpu);
+
 	return task;
 }
 
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index da30a4d4f35c..cb6ef449b987 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -68,6 +68,8 @@ struct locomo {
 #endif
 };
 
+static const struct bus_type locomo_bus_type;
+
 struct locomo_dev_info {
 	unsigned long	offset;
 	unsigned long	length;
@@ -350,19 +352,6 @@ static int locomo_resume(struct platform_device *dev)
 }
 #endif
 
-
-/**
- *	locomo_probe - probe for a single LoCoMo chip.
- *	@phys_addr: physical address of device.
- *
- *	Probe for a LoCoMo chip.  This must be called
- *	before any other locomo-specific code.
- *
- *	Returns:
- *	%-ENODEV	device not found.
- *	%-EBUSY		physical address already marked in-use.
- *	%0		successful.
- */
 static int
 __locomo_probe(struct device *me, struct resource *mem, int irq)
 {
@@ -479,6 +468,21 @@ static void __locomo_remove(struct locomo *lchip)
 	kfree(lchip);
 }
 
+/**
+ *	locomo_probe - probe for a single LoCoMo chip.
+ *	@dev: platform device
+ *
+ *	Probe for a LoCoMo chip.  This must be called
+ *	before any other locomo-specific code.
+ *
+ *	Returns:
+ *	* %-EINVAL	- device's IORESOURCE_MEM not found
+ *	* %-ENXIO	- could not allocate an IRQ for the device
+ *	* %-ENODEV	- device not found.
+ *	* %-EBUSY	- physical address already marked in-use.
+ *	* %-ENOMEM	- could not allocate or iomap memory.
+ *	* %0		- successful.
+ */
 static int locomo_probe(struct platform_device *dev)
 {
 	struct resource *mem;
@@ -494,7 +498,7 @@ static int locomo_probe(struct platform_device *dev)
 	return __locomo_probe(&dev->dev, mem, irq);
 }
 
-static int locomo_remove(struct platform_device *dev)
+static void locomo_remove(struct platform_device *dev)
 {
 	struct locomo *lchip = platform_get_drvdata(dev);
 
@@ -502,8 +506,6 @@ static int locomo_remove(struct platform_device *dev)
 		__locomo_remove(lchip);
 		platform_set_drvdata(dev, NULL);
 	}
-
-	return 0;
 }
 
 /*
@@ -814,10 +816,10 @@ EXPORT_SYMBOL(locomo_frontlight_set);
  *	We model this as a regular bus type, and hang devices directly
  *	off this.
  */
-static int locomo_match(struct device *_dev, struct device_driver *_drv)
+static int locomo_match(struct device *_dev, const struct device_driver *_drv)
 {
 	struct locomo_dev *dev = LOCOMO_DEV(_dev);
-	struct locomo_driver *drv = LOCOMO_DRV(_drv);
+	const struct locomo_driver *drv = LOCOMO_DRV(_drv);
 
 	return dev->devid == drv->devid;
 }
@@ -842,7 +844,7 @@ static void locomo_bus_remove(struct device *dev)
 		drv->remove(ldev);
 }
 
-struct bus_type locomo_bus_type = {
+static const struct bus_type locomo_bus_type = {
 	.name		= "locomo-bus",
 	.match		= locomo_match,
 	.probe		= locomo_bus_probe,
diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c
index 8a9aeeb504dd..e013ff1168d3 100644
--- a/arch/arm/common/mcpm_entry.c
+++ b/arch/arm/common/mcpm_entry.c
@@ -21,7 +21,7 @@
 /*
  * The public API for this code is documented in arch/arm/include/asm/mcpm.h.
  * For a comprehensive description of the main algorithm used here, please
- * see Documentation/arm/cluster-pm-race-avoidance.rst.
+ * see Documentation/arch/arm/cluster-pm-race-avoidance.rst.
  */
 
 struct sync_struct mcpm_sync;
diff --git a/arch/arm/common/mcpm_head.S b/arch/arm/common/mcpm_head.S
index 291d969bc719..f590e803ca11 100644
--- a/arch/arm/common/mcpm_head.S
+++ b/arch/arm/common/mcpm_head.S
@@ -5,7 +5,7 @@
  * Created by:  Nicolas Pitre, March 2012
  * Copyright:   (C) 2012-2013  Linaro Limited
  *
- * Refer to Documentation/arm/cluster-pm-race-avoidance.rst
+ * Refer to Documentation/arch/arm/cluster-pm-race-avoidance.rst
  * for details of the synchronisation algorithms used here.
  */
 
@@ -15,6 +15,8 @@
 
 #include "vlock.h"
 
+.arch armv7-a
+
 .if MCPM_SYNC_CLUSTER_CPUS
 .error "cpus must be the first member of struct mcpm_sync_struct"
 .endif
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index f5e6990b8856..3389a70e4d49 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -416,9 +416,9 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 	writel_relaxed(~0, irqbase + SA1111_INTSTATCLR0);
 	writel_relaxed(~0, irqbase + SA1111_INTSTATCLR1);
 
-	sachip->irqdomain = irq_domain_add_linear(NULL, SA1111_IRQ_NR,
-						  &sa1111_irqdomain_ops,
-						  sachip);
+	sachip->irqdomain = irq_domain_create_linear(NULL, SA1111_IRQ_NR,
+						     &sa1111_irqdomain_ops,
+						     sachip);
 	if (!sachip->irqdomain) {
 		irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
 		return -ENOMEM;
@@ -563,7 +563,7 @@ static int sa1111_gpio_get(struct gpio_chip *gc, unsigned offset)
 	return !!(readl_relaxed(reg + SA1111_GPIO_PXDRR) & mask);
 }
 
-static void sa1111_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+static int sa1111_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
 {
 	struct sa1111 *sachip = gc_to_sa1111(gc);
 	unsigned long flags;
@@ -574,10 +574,12 @@ static void sa1111_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
 	sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
 	sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
 	spin_unlock_irqrestore(&sachip->lock, flags);
+
+	return 0;
 }
 
-static void sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
-	unsigned long *bits)
+static int sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
+				    unsigned long *bits)
 {
 	struct sa1111 *sachip = gc_to_sa1111(gc);
 	unsigned long flags;
@@ -595,6 +597,8 @@ static void sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
 	sa1111_gpio_modify(reg + SA1111_GPIO_PCDWR, (msk >> 12) & 255, val >> 12);
 	sa1111_gpio_modify(reg + SA1111_GPIO_PCSSR, (msk >> 12) & 255, val >> 12);
 	spin_unlock_irqrestore(&sachip->lock, flags);
+
+	return 0;
 }
 
 static int sa1111_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
@@ -695,7 +699,7 @@ static u32 sa1111_dma_mask[] = {
 /*
  * Configure the SA1111 shared memory controller.
  */
-void
+static void
 sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
 		     unsigned int cas_latency)
 {
@@ -785,19 +789,6 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 	return ret;
 }
 
-/**
- *	sa1111_probe - probe for a single SA1111 chip.
- *	@phys_addr: physical address of device.
- *
- *	Probe for a SA1111 chip.  This must be called
- *	before any other SA1111-specific code.
- *
- *	Returns:
- *	%-ENODEV	device not found.
- *	%-EBUSY		physical address already marked in-use.
- *	%-EINVAL	no platform data passed
- *	%0		successful.
- */
 static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
 {
 	struct sa1111_platform_data *pd = me->platform_data;
@@ -1108,6 +1099,20 @@ static int sa1111_resume_noirq(struct device *dev)
 #define sa1111_resume_noirq  NULL
 #endif
 
+/**
+ *	sa1111_probe - probe for a single SA1111 chip.
+ *	@pdev: platform device.
+ *
+ *	Probe for a SA1111 chip.  This must be called
+ *	before any other SA1111-specific code.
+ *
+ *	Returns:
+ *	* %-ENODEV	- device not found.
+ *	* %-ENOMEM	- memory allocation failure.
+ *	* %-EBUSY	- physical address already marked in-use.
+ *	* %-EINVAL	- no platform data passed
+ *	* %0		- successful.
+ */
 static int sa1111_probe(struct platform_device *pdev)
 {
 	struct resource *mem;
@@ -1123,7 +1128,7 @@ static int sa1111_probe(struct platform_device *pdev)
 	return __sa1111_probe(&pdev->dev, mem, irq);
 }
 
-static int sa1111_remove(struct platform_device *pdev)
+static void sa1111_remove(struct platform_device *pdev)
 {
 	struct sa1111 *sachip = platform_get_drvdata(pdev);
 
@@ -1135,8 +1140,6 @@ static int sa1111_remove(struct platform_device *pdev)
 		__sa1111_remove(sachip);
 		platform_set_drvdata(pdev, NULL);
 	}
-
-	return 0;
 }
 
 static struct dev_pm_ops sa1111_pm_ops = {
@@ -1340,10 +1343,10 @@ EXPORT_SYMBOL_GPL(sa1111_get_irq);
  *	We model this as a regular bus type, and hang devices directly
  *	off this.
  */
-static int sa1111_match(struct device *_dev, struct device_driver *_drv)
+static int sa1111_match(struct device *_dev, const struct device_driver *_drv)
 {
 	struct sa1111_dev *dev = to_sa1111_device(_dev);
-	struct sa1111_driver *drv = SA1111_DRV(_drv);
+	const struct sa1111_driver *drv = SA1111_DRV(_drv);
 
 	return !!(dev->devid & drv->devid);
 }
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index e74c5bfdc6d3..dddb73c96826 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -63,7 +63,8 @@ static void __scoop_gpio_set(struct scoop_dev *sdev,
 	iowrite16(gpwr, sdev->base + SCOOP_GPWR);
 }
 
-static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+static int scoop_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			  int value)
 {
 	struct scoop_dev *sdev = gpiochip_get_data(chip);
 	unsigned long flags;
@@ -73,6 +74,8 @@ static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	__scoop_gpio_set(sdev, offset, value);
 
 	spin_unlock_irqrestore(&sdev->scoop_lock, flags);
+
+	return 0;
 }
 
 static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset)
@@ -236,7 +239,7 @@ err_ioremap:
 	return ret;
 }
 
-static int scoop_remove(struct platform_device *pdev)
+static void scoop_remove(struct platform_device *pdev)
 {
 	struct scoop_dev *sdev = platform_get_drvdata(pdev);
 
@@ -246,8 +249,6 @@ static int scoop_remove(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 	iounmap(sdev->base);
 	kfree(sdev);
-
-	return 0;
 }
 
 static struct platform_driver scoop_driver = {
diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c
index 6237ede2f0c7..1ca26c063f80 100644
--- a/arch/arm/common/sharpsl_param.c
+++ b/arch/arm/common/sharpsl_param.c
@@ -11,7 +11,7 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <asm/mach/sharpsl_param.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 
 /*
  * Certain hardware parameters determined at the time of device manufacture,
diff --git a/arch/arm/common/vlock.S b/arch/arm/common/vlock.S
index f1c7fd44f1b1..c5eaed5a76f0 100644
--- a/arch/arm/common/vlock.S
+++ b/arch/arm/common/vlock.S
@@ -6,12 +6,14 @@
  * Copyright:	(C) 2012-2013  Linaro Limited
  *
  * This algorithm is described in more detail in
- * Documentation/arm/vlocks.rst.
+ * Documentation/arch/arm/vlocks.rst.
  */
 
 #include <linux/linkage.h>
 #include "vlock.h"
 
+.arch armv7-a
+
 /* Select different code if voting flags  can fit in a single word. */
 #if VLOCK_VOTING_SIZE > 4
 #define FEW(x...)
diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig
index 3f633eaf9770..134a559aba3d 100644
--- a/arch/arm/configs/am200epdkit_defconfig
+++ b/arch/arm/configs/am200epdkit_defconfig
@@ -1,6 +1,5 @@
 CONFIG_LOCALVERSION="gum"
 CONFIG_SYSVIPC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_PREEMPT=y
 CONFIG_EXPERT=y
 # CONFIG_EPOLL is not set
@@ -15,7 +14,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SWAP is not set
-CONFIG_SLAB=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=m
@@ -50,7 +48,6 @@ CONFIG_BLK_DEV_SD=m
 CONFIG_ATA=m
 CONFIG_PATA_PCMCIA=m
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=m
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_PXA=y
diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig
index 67feb060bb19..28b724d59e7e 100644
--- a/arch/arm/configs/aspeed_g4_defconfig
+++ b/arch/arm/configs/aspeed_g4_defconfig
@@ -7,15 +7,17 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_CGROUPS=y
+CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZO is not set
 # CONFIG_RD_LZ4 is not set
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSFS_SYSCALL is not set
 # CONFIG_AIO is not set
-CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
+CONFIG_KEXEC=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_ASPEED=y
 CONFIG_MACH_ASPEED_G4=y
@@ -23,12 +25,8 @@ CONFIG_VMSPLIT_2G=y
 CONFIG_AEABI=y
 CONFIG_UACCESS_WITH_MEMCPY=y
 # CONFIG_ATAGS is not set
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_KEXEC=y
 CONFIG_JUMP_LABEL=y
 CONFIG_STRICT_KERNEL_RWX=y
-# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEBUG_FS is not set
 # CONFIG_MQ_IOSCHED_DEADLINE is not set
 # CONFIG_MQ_IOSCHED_KYBER is not set
@@ -47,7 +45,11 @@ CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_DIAG is not set
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
 # CONFIG_IPV6_SIT is not set
+CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_ADVANCED is not set
 CONFIG_VLAN_8021Q=y
@@ -56,7 +58,6 @@ CONFIG_NET_NCSI=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_PARTITIONED_MASTER=y
@@ -66,6 +67,7 @@ CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_MTD_UBI_BLOCK=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
 CONFIG_EEPROM_AT24=y
 CONFIG_NETDEVICES=y
 CONFIG_NETCONSOLE=y
@@ -145,6 +147,7 @@ CONFIG_SENSORS_ASPEED=y
 CONFIG_SENSORS_IIO_HWMON=y
 CONFIG_SENSORS_LM75=y
 CONFIG_SENSORS_NCT7904=y
+CONFIG_SENSORS_OCC_P8_I2C=y
 CONFIG_PMBUS=y
 CONFIG_SENSORS_ADM1275=y
 CONFIG_SENSORS_IBM_CFFPS=y
@@ -249,7 +252,7 @@ CONFIG_DEBUG_INFO_REDUCED=y
 CONFIG_GDB_SCRIPTS=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_WX=y
+CONFIG_ARM_DEBUG_WX=y
 CONFIG_SCHED_STACK_END_CHECK=y
 CONFIG_PANIC_ON_OOPS=y
 CONFIG_PANIC_TIMEOUT=-1
diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig
index 247ab72b2590..61cee1e7ebea 100644
--- a/arch/arm/configs/aspeed_g5_defconfig
+++ b/arch/arm/configs/aspeed_g5_defconfig
@@ -7,15 +7,17 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_CGROUPS=y
+CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZO is not set
 # CONFIG_RD_LZ4 is not set
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSFS_SYSCALL is not set
 # CONFIG_AIO is not set
-CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_ASPEED=y
 CONFIG_MACH_ASPEED_G5=y
@@ -28,12 +30,10 @@ CONFIG_NR_CPUS=2
 CONFIG_HIGHMEM=y
 CONFIG_UACCESS_WITH_MEMCPY=y
 # CONFIG_ATAGS is not set
-CONFIG_KEXEC=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
 CONFIG_JUMP_LABEL=y
-# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEBUG_FS is not set
 # CONFIG_MQ_IOSCHED_DEADLINE is not set
 # CONFIG_MQ_IOSCHED_KYBER is not set
@@ -65,11 +65,11 @@ CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_ADVANCED is not set
 CONFIG_VLAN_8021Q=y
 CONFIG_NET_NCSI=y
+CONFIG_MCTP=y
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_PARTITIONED_MASTER=y
@@ -80,8 +80,12 @@ CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_MTD_UBI_BLOCK=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
+CONFIG_SMPRO_ERRMON=y
+CONFIG_SMPRO_MISC=y
 CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 CONFIG_NETCONSOLE=y
 # CONFIG_NET_VENDOR_ALACRITECH is not set
@@ -119,6 +123,8 @@ CONFIG_FTGMAC100=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_BROADCOM_PHY=y
 CONFIG_REALTEK_PHY=y
+CONFIG_MCTP_SERIAL=y
+CONFIG_MCTP_TRANSPORT_I2C=y
 # CONFIG_USB_NET_DRIVERS is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
@@ -145,7 +151,10 @@ CONFIG_ASPEED_KCS_IPMI_BMC=y
 CONFIG_IPMI_KCS_BMC_CDEV_IPMI=y
 CONFIG_IPMI_KCS_BMC_SERIO=y
 CONFIG_ASPEED_BT_IPMI_BMC=y
+CONFIG_SSIF_IPMI_BMC=y
 CONFIG_HW_RANDOM_TIMERIOMEM=y
+CONFIG_TCG_TPM=y
+CONFIG_TCG_TIS_I2C=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX_GPIO=y
@@ -166,6 +175,7 @@ CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_GPIO=y
 CONFIG_W1_SLAVE_THERM=y
+CONFIG_SENSORS_SMPRO=y
 CONFIG_SENSORS_ADT7475=y
 CONFIG_SENSORS_ASPEED=y
 CONFIG_SENSORS_IIO_HWMON=y
@@ -180,12 +190,14 @@ CONFIG_SENSORS_IR38064=y
 CONFIG_SENSORS_ISL68137=y
 CONFIG_SENSORS_LM25066=y
 CONFIG_SENSORS_MAX31785=y
+CONFIG_SENSORS_MP5023=y
 CONFIG_SENSORS_UCD9000=y
 CONFIG_SENSORS_UCD9200=y
 CONFIG_SENSORS_SBTSI=y
 CONFIG_SENSORS_TMP421=y
 CONFIG_SENSORS_W83773G=y
 CONFIG_WATCHDOG_SYSFS=y
+CONFIG_MFD_SMPRO=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_SUPPORT_FILTER=y
 CONFIG_MEDIA_PLATFORM_SUPPORT=y
@@ -200,6 +212,9 @@ CONFIG_USB_DYNAMIC_MINORS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_PL2303=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ASPEED_VHUB=y
 CONFIG_USB_CONFIGFS=y
@@ -240,12 +255,18 @@ CONFIG_FSI_MASTER_GPIO=y
 CONFIG_FSI_MASTER_HUB=y
 CONFIG_FSI_MASTER_AST_CF=y
 CONFIG_FSI_MASTER_ASPEED=y
+CONFIG_FSI_MASTER_I2CR=y
 CONFIG_FSI_SCOM=y
 CONFIG_FSI_SBEFIFO=y
 CONFIG_FSI_OCC=y
+CONFIG_I2CR_SCOM=y
+CONFIG_PECI=y
+CONFIG_PECI_CPU=y
+CONFIG_PECI_ASPEED=y
 CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
 CONFIG_OVERLAY_FS=y
+CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 # CONFIG_JFFS2_FS_WRITEBUFFER is not set
@@ -261,6 +282,9 @@ CONFIG_PSTORE_PMSG=y
 CONFIG_PSTORE_FTRACE=y
 CONFIG_PSTORE_RAM=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_SECURITYFS is not set
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_FORTIFY_SOURCE=y
 CONFIG_CRYPTO_HMAC=y
@@ -278,7 +302,7 @@ CONFIG_DEBUG_INFO_REDUCED=y
 CONFIG_GDB_SCRIPTS=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_WX=y
+CONFIG_ARM_DEBUG_WX=y
 CONFIG_SCHED_STACK_END_CHECK=y
 CONFIG_PANIC_ON_OOPS=y
 CONFIG_PANIC_TIMEOUT=-1
diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig
index 801383e4135d..07ab9eaac4af 100644
--- a/arch/arm/configs/assabet_defconfig
+++ b/arch/arm/configs/assabet_defconfig
@@ -1,6 +1,8 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_ASSABET=y
 CONFIG_CMDLINE="mem=32M console=ttySA0,38400n8 initrd=0xc0800000,3M root=/dev/ram"
@@ -26,7 +28,6 @@ CONFIG_MTD_SA1100=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_NET_PCMCIA=y
 CONFIG_PCMCIA_PCNET=y
 CONFIG_INPUT_EVDEV=y
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index da90ce9cd42e..ff13e1ecf4bb 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -6,8 +6,9 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
@@ -15,6 +16,7 @@ CONFIG_ARCH_AT91=y
 CONFIG_SOC_AT91RM9200=y
 CONFIG_SOC_AT91SAM9=y
 CONFIG_SOC_SAM9X60=y
+CONFIG_SOC_SAM9X7=y
 # CONFIG_ATMEL_CLOCKSOURCE_PIT is not set
 CONFIG_AEABI=y
 CONFIG_UACCESS_WITH_MEMCPY=y
@@ -22,12 +24,10 @@ CONFIG_UACCESS_WITH_MEMCPY=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
-CONFIG_KEXEC=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_SWAP is not set
-CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -40,7 +40,6 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_DIAG is not set
 CONFIG_IPV6_SIT_6RD=y
 CONFIG_CAN=y
-CONFIG_CAN_AT91=y
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_DEVTMPFS=y
@@ -81,6 +80,7 @@ CONFIG_DM9000=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 CONFIG_DAVICOM_PHY=y
 CONFIG_MICREL_PHY=y
+CONFIG_CAN_AT91=y
 CONFIG_LIBERTAS=m
 CONFIG_LIBERTAS_SDIO=m
 CONFIG_LIBERTAS_SPI=m
@@ -144,6 +144,7 @@ CONFIG_VIDEO_OV2640=m
 CONFIG_VIDEO_OV7740=m
 CONFIG_DRM=y
 CONFIG_DRM_ATMEL_HLCDC=y
+CONFIG_DRM_MICROCHIP_LVDS_SERIALIZER=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
 CONFIG_FB_ATMEL=y
@@ -196,11 +197,11 @@ CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_DMADEVICES=y
 CONFIG_AT_HDMAC=y
 CONFIG_AT_XDMAC=y
-CONFIG_MICROCHIP_PIT64B=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_AT91_ADC=y
 CONFIG_AT91_SAMA5D2_ADC=y
+CONFIG_PAC1934=m
 CONFIG_PWM=y
 CONFIG_PWM_ATMEL=y
 CONFIG_PWM_ATMEL_HLCDC_PWM=y
@@ -218,6 +219,7 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_CFB=y
 CONFIG_CRYPTO_OFB=y
@@ -225,13 +227,11 @@ CONFIG_CRYPTO_XTS=y
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_DEV_ATMEL_AES=y
 CONFIG_CRYPTO_DEV_ATMEL_TDES=y
 CONFIG_CRYPTO_DEV_ATMEL_SHA=y
-CONFIG_CRC_CCITT=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_ACORN_8x8=y
diff --git a/arch/arm/configs/axm55xx_defconfig b/arch/arm/configs/axm55xx_defconfig
index bfbaa2df3be5..516689dc6cf1 100644
--- a/arch/arm/configs/axm55xx_defconfig
+++ b/arch/arm/configs/axm55xx_defconfig
@@ -21,7 +21,7 @@ CONFIG_NAMESPACES=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PROFILING=y
 CONFIG_ARCH_AXXIA=y
 CONFIG_ARM_LPAE=y
@@ -197,7 +197,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT4_FS=y
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS_FS=y
 CONFIG_FUSE_FS=y
 CONFIG_CUSE=y
 CONFIG_FSCACHE=y
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
deleted file mode 100644
index 506f3378da07..000000000000
--- a/arch/arm/configs/badge4_defconfig
+++ /dev/null
@@ -1,104 +0,0 @@
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_BADGE4=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="init=/linuxrc root=/dev/mtdblock3"
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_MODULES=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIVHCI=m
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_SA1100=y
-CONFIG_PARPORT=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_ELEKTOR=m
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_SA1100_WATCHDOG=m
-CONFIG_SOUND=y
-CONFIG_SOUND_PRIME=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_USS720=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=m
-CONFIG_MINIX_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index c4d2e2334b6e..27dc3bf6b124 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -1,13 +1,12 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_CFS_BANDWIDTH=y
-CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CPUSETS=y
 CONFIG_CGROUP_DEVICE=y
@@ -18,17 +17,17 @@ CONFIG_SCHED_AUTOGROUP=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
 CONFIG_PROFILING=y
 CONFIG_CC_STACKPROTECTOR_REGULAR=y
+CONFIG_CRASH_DUMP=y
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM2835=y
 CONFIG_AEABI=y
 CONFIG_SECCOMP=y
 CONFIG_KEXEC=y
-CONFIG_CRASH_DUMP=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
@@ -107,7 +106,8 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_DRM=y
 CONFIG_DRM_V3D=y
 CONFIG_DRM_VC4=y
-CONFIG_FB_SIMPLE=y
+CONFIG_DRM_SIMPLEDRM=y
+CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_SOUND=y
 CONFIG_SND=y
diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig
deleted file mode 100644
index 7e6f7dfa3023..000000000000
--- a/arch/arm/configs/cerfcube_defconfig
+++ /dev/null
@@ -1,71 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_CERF=y
-CONFIG_SA1100_CERF_FLASH_16MB=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttySA0,38400 root=/dev/mtdblock3 rootfstype=jffs2 rw mem=32M init=/linuxrc"
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_FPE_FASTFPE=y
-CONFIG_PM=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_SA1100=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_WATCHDOG=y
-CONFIG_SA1100_WATCHDOG=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_SMB_FS=m
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig
index 92481b2a88fa..6fa3477e6b02 100644
--- a/arch/arm/configs/clps711x_defconfig
+++ b/arch/arm/configs/clps711x_defconfig
@@ -3,18 +3,12 @@ CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_RD_LZMA=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_JUMP_LABEL=y
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_ARCH_CLPS711X=y
-CONFIG_ARCH_AUTCPU12=y
-CONFIG_ARCH_CDB89712=y
-CONFIG_ARCH_CLEP7312=y
-CONFIG_ARCH_EDB7211=y
-CONFIG_ARCH_P720T=y
 CONFIG_AEABI=y
 # CONFIG_COREDUMP is not set
-CONFIG_SLOB=y
+CONFIG_SLUB_TINY=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
deleted file mode 100644
index 31f41159bef2..000000000000
--- a/arch/arm/configs/cm_x300_defconfig
+++ /dev/null
@@ -1,163 +0,0 @@
-CONFIG_LOCALVERSION="-cm-x300"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_CM_X300=y
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_APM_EMULATION=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_LIB80211=m
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_MARVELL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=0
-CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_DA9034 is not set
-CONFIG_TOUCHSCREEN_WM97XX=m
-# CONFIG_TOUCHSCREEN_WM9705 is not set
-# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PCA953X=y
-# CONFIG_HWMON is not set
-CONFIG_PMIC_DA903X=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DA903X=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_TDO24M=y
-CONFIG_BACKLIGHT_DA903X=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_HID_DRAGONRISE=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_TWINHAN=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_GREENASIA=y
-CONFIG_HID_SMARTJOYPLUS=y
-CONFIG_HID_TOPSEED=y
-CONFIG_HID_THRUSTMASTER=y
-CONFIG_HID_ZEROPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=m
-CONFIG_MMC_PXA=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_V3020=y
-CONFIG_RTC_DRV_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_FONTS=y
-CONFIG_FONT_6x11=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig
deleted file mode 100644
index b3aab97c0728..000000000000
--- a/arch/arm/configs/cns3420vb_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_PERF_EVENTS is not set
-CONFIG_PROFILING=y
-CONFIG_ARCH_MULTI_V6=y
-CONFIG_ARCH_CNS3XXX=y
-CONFIG_MACH_CNS3420VB=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait"
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_IOSCHED_BFQ=m
-#CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_DEBUG_CNS3XXX=y
-CONFIG_AEABI=y
-# CONFIG_SWAP is not set
-CONFIG_SLAB=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=20000
-CONFIG_BLK_DEV_SD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ATA=y
-# CONFIG_SATA_PMP is not set
-# CONFIG_ATA_SFF is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FSCACHE=y
-CONFIG_TMPFS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_CRC_CCITT=y
-CONFIG_DEBUG_FS=y
diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
deleted file mode 100644
index 8357d721c69c..000000000000
--- a/arch/arm/configs/colibri_pxa270_defconfig
+++ /dev/null
@@ -1,157 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_PREEMPT=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_COLIBRI=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_VLAN_8021Q=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_CFG80211=y
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_DISKONCHIP=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_PHYLIB=y
-CONFIG_HOSTAP=y
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_SERIAL=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_PXA=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_LOGO=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_MMC=y
-CONFIG_NEW_LEDS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_PCF8583=m
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V4=y
-CONFIG_NLS_DEFAULT="iso8859-15"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig
deleted file mode 100644
index 42adfefdb6dc..000000000000
--- a/arch/arm/configs/colibri_pxa300_defconfig
+++ /dev/null
@@ -1,60 +0,0 @@
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_COLIBRI300=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttyS0,115200 rw"
-CONFIG_CPU_IDLE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_IPV6=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_AX88796=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_DEBUG_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_MON=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_EXT3_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_AES=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index d35cc59ce847..578c6a4af620 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -3,15 +3,17 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
-# CONFIG_BASE_FULL is not set
+CONFIG_BASE_SMALL=y
 # CONFIG_EPOLL is not set
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_COLLIE=y
 CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1"
 CONFIG_FPE_NWFPE=y
 CONFIG_PM=y
 # CONFIG_SWAP is not set
-CONFIG_SLOB=y
+CONFIG_SLUB_TINY=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -57,9 +59,9 @@ CONFIG_MCP_SA11X0=y
 CONFIG_MCP_UCB1200=y
 CONFIG_MCP_UCB1200_TS=y
 CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_SA1100=y
 # CONFIG_VGA_CONSOLE is not set
+CONFIG_FB_MODE_HELPERS=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_NEW_LEDS=y
@@ -76,7 +78,6 @@ CONFIG_ROMFS_FS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_CRC_CCITT=y
 CONFIG_FONTS=y
 CONFIG_FONT_MINI_4x6=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
deleted file mode 100644
index 1f137f74050f..000000000000
--- a/arch/arm/configs/corgi_defconfig
+++ /dev/null
@@ -1,248 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_PREEMPT=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_PROFILING=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_PXA_SHARPSL=y
-CONFIG_MACH_POODLE=y
-CONFIG_MACH_CORGI=y
-CONFIG_MACH_SHEPHERD=y
-CONFIG_MACH_HUSKY=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_SHARPSL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ATA=y
-CONFIG_PATA_PCMCIA=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_NET_PCMCIA=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_FB=y
-CONFIG_FB_W100=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_CORGI=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SOUND_PRIME=y
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB=m
-CONFIG_USB_MON=m
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_NFS_V4=m
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=m
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index fc71a03a9c8c..e2ddaca0f89d 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
@@ -14,7 +14,6 @@ CONFIG_ARCH_MULTIPLATFORM=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_DAVINCI=y
-CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
@@ -148,8 +147,8 @@ CONFIG_DRM_SIMPLE_BRIDGE=m
 CONFIG_DRM_TINYDRM=m
 CONFIG_TINYDRM_ST7586=m
 CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_DA8XX=y
+CONFIG_FIRMWARE_EDID=y
 CONFIG_BACKLIGHT_PWM=m
 CONFIG_BACKLIGHT_GPIO=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -232,7 +231,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_AUTOFS4_FS=m
+CONFIG_AUTOFS_FS=m
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
@@ -249,7 +248,6 @@ CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_T10DIF=m
 CONFIG_DMA_CMA=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_RT_MUTEXES=y
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index 16ed5c110e8d..d76eb12d29a7 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -1,14 +1,12 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EXPERT=y
 # CONFIG_ARCH_MULTI_V6 is not set
 CONFIG_ARCH_MULTI_V7=y
 CONFIG_ARCH_DOVE=y
-CONFIG_MACH_DOVE_DB=y
 CONFIG_MACH_CM_A510=y
-CONFIG_MACH_DOVE_DT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_ARM_APPENDED_DTB=y
@@ -17,7 +15,6 @@ CONFIG_VFP=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -116,8 +113,10 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
 CONFIG_NLS_UTF8=y
 CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
@@ -125,17 +124,13 @@ CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
 CONFIG_PRINTK_TIME=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
diff --git a/arch/arm/configs/dram_0x00000000.config b/arch/arm/configs/dram_0x00000000.config
index db96dcb420ce..8803a0f58343 100644
--- a/arch/arm/configs/dram_0x00000000.config
+++ b/arch/arm/configs/dram_0x00000000.config
@@ -1 +1,2 @@
+# Help: DRAM base at 0x00000000
 CONFIG_DRAM_BASE=0x00000000
diff --git a/arch/arm/configs/dram_0xc0000000.config b/arch/arm/configs/dram_0xc0000000.config
index 343d5333d973..aab8f864686b 100644
--- a/arch/arm/configs/dram_0xc0000000.config
+++ b/arch/arm/configs/dram_0xc0000000.config
@@ -1 +1,2 @@
+# Help: DRAM base at 0xc0000000
 CONFIG_DRAM_BASE=0xc0000000
diff --git a/arch/arm/configs/dram_0xd0000000.config b/arch/arm/configs/dram_0xd0000000.config
index 61ba7045f8a1..4aabce4ea3d4 100644
--- a/arch/arm/configs/dram_0xd0000000.config
+++ b/arch/arm/configs/dram_0xd0000000.config
@@ -1 +1,2 @@
+# Help: DRAM base at 0xd0000000
 CONFIG_DRAM_BASE=0xd0000000
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 3154125321c5..2248afaf35b5 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -24,7 +24,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -79,8 +78,8 @@ CONFIG_SPI_EP93XX=y
 CONFIG_WATCHDOG=y
 CONFIG_EP93XX_WATCHDOG=y
 CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_EP93XX=y
+CONFIG_FB_MODE_HELPERS=y
 CONFIG_LOGO=y
 CONFIG_USB=y
 CONFIG_USB_DYNAMIC_MINORS=y
@@ -114,7 +113,6 @@ CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_LIBCRC32C=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_SLAB=y
 CONFIG_DEBUG_SPINLOCK=y
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
deleted file mode 100644
index b4c2e6457e04..000000000000
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ /dev/null
@@ -1,97 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_PXA_ESERIES=y
-CONFIG_IWMMXT=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_SLAB=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_PCCARD=y
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_PXA2XX=m
-# CONFIG_STANDALONE is not set
-CONFIG_MTD=m
-CONFIG_MTD_RAW_NAND=m
-CONFIG_MTD_NAND_TMIO=m
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=m
-# CONFIG_SATA_PMP is not set
-CONFIG_PATA_PCMCIA=m
-CONFIG_NETDEVICES=y
-CONFIG_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-CONFIG_NET_PCMCIA=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_WM97XX=m
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_PXA=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_MFD_T7L66XB=y
-CONFIG_MFD_TC6387XB=y
-CONFIG_MFD_TC6393XB=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_FB_W100=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_PCMCIA is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_E800=m
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_TMIO=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 1ce74f46e114..84070e9698e8 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_CGROUPS=y
@@ -32,12 +32,6 @@ CONFIG_KERNEL_MODE_NEON=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_ADVANCED_DEBUG=y
 CONFIG_ENERGY_MODEL=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM_NEON=m
-CONFIG_CRYPTO_SHA256_ARM=m
-CONFIG_CRYPTO_SHA512_ARM=m
-CONFIG_CRYPTO_AES_ARM_BS=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -99,7 +93,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_ATA=y
 # CONFIG_SATA_PMP is not set
-CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_DWC=y
 # CONFIG_ATA_SFF is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_DM=y
@@ -173,7 +167,7 @@ CONFIG_MFD_MAX77686=y
 CONFIG_MFD_MAX77693=y
 CONFIG_MFD_MAX8997=y
 CONFIG_MFD_MAX8998=y
-CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SEC_I2C=y
 CONFIG_MFD_STMPE=y
 CONFIG_STMPE_I2C=y
 CONFIG_MFD_TPS65090=y
@@ -324,16 +318,20 @@ CONFIG_EXTCON_MAX77693=y
 CONFIG_EXTCON_MAX8997=y
 CONFIG_EXYNOS5422_DMC=y
 CONFIG_IIO=y
+CONFIG_IIO_ST_ACCEL_3AXIS=m
+# CONFIG_IIO_ST_ACCEL_SPI_3AXIS is not set
 CONFIG_EXYNOS_ADC=y
 CONFIG_STMPE_ADC=y
+CONFIG_IIO_ST_GYRO_3AXIS=m
 CONFIG_CM36651=y
 CONFIG_AK8975=y
+CONFIG_SENSORS_ISL29018=y
 CONFIG_PWM=y
 CONFIG_PWM_SAMSUNG=y
 CONFIG_PHY_EXYNOS5250_SATA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT4_FS=y
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
@@ -351,7 +349,7 @@ CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_CRYPTO_USER=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_XTS=m
@@ -365,17 +363,17 @@ CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
+CONFIG_CRYPTO_AES_ARM_BS=m
 CONFIG_CRYPTO_DEV_EXYNOS_RNG=y
 CONFIG_CRYPTO_DEV_S5P=y
-CONFIG_CRC_CCITT=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=96
 CONFIG_FONTS=y
 CONFIG_FONT_7x14=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
deleted file mode 100644
index 1a41391d7367..000000000000
--- a/arch/arm/configs/ezx_defconfig
+++ /dev/null
@@ -1,390 +0,0 @@
-CONFIG_LOCALVERSION="-ezx200910312315"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_EXPERT=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_PXA_EZX=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
-CONFIG_KEXEC=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_IDLE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_BINFMT_MISC=m
-CONFIG_SLAB=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_SCTP=y
-CONFIG_NF_CT_PROTO_UDPLITE=y
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NF_NAT=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BRIDGE=m
-CONFIG_BT=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-# CONFIG_WIRELESS is not set
-CONFIG_FW_LOADER=m
-CONFIG_CONNECTOR=m
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_OTP=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_WLAN is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_PCAP=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_INPUT_PCAP=y
-# CONFIG_SERIO is not set
-CONFIG_LEGACY_PTY_COUNT=8
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_EZX_PCAP=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-CONFIG_REGULATOR_PCAP=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_MEDIA_TUNER_CUSTOMISE=y
-CONFIG_RADIO_TEA5764=y
-# CONFIG_MEDIA_TUNER_MC44S803 is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_PXA27x=y
-# CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_OVERLAY=y
-CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_PXA2XX_SOC=y
-CONFIG_HID_APPLE=m
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_PXA27X=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_PXA=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_LP3944=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCAP=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_XFS_FS=m
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_ROMFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_PROVE_LOCKING=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig
index 504070812ad0..5f6963687ee4 100644
--- a/arch/arm/configs/footbridge_defconfig
+++ b/arch/arm/configs/footbridge_defconfig
@@ -4,12 +4,13 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_FOOTBRIDGE=y
 CONFIG_ARCH_EBSA285_HOST=y
 CONFIG_ARCH_NETWINDER=y
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-CONFIG_BINFMT_AOUT=y
 CONFIG_MODULES=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ACORN_PARTITION=y
@@ -54,7 +55,6 @@ CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
 CONFIG_NET_PCI=y
@@ -93,7 +93,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_EXT2_FS=y
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS_FS=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_MSDOS_FS=m
diff --git a/arch/arm/configs/gemini_defconfig b/arch/arm/configs/gemini_defconfig
index a80bc8a43091..7b1daec630cb 100644
--- a/arch/arm/configs/gemini_defconfig
+++ b/arch/arm/configs/gemini_defconfig
@@ -7,13 +7,13 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_USER_NS=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_MULTI_V4=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_GEMINI=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_CMDLINE="console=ttyS0,115200n8"
-CONFIG_KEXEC=y
 CONFIG_PM=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
@@ -83,9 +83,9 @@ CONFIG_LOGO=y
 CONFIG_USB=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_FOTG210_HCD=y
 CONFIG_USB_UHCI_HCD=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_FOTG210_HCD=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index 5bd1ec539610..4e272875c797 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -4,6 +4,8 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_H3600=y
 # CONFIG_CPU_FREQ_STAT is not set
diff --git a/arch/arm/configs/h5000_defconfig b/arch/arm/configs/h5000_defconfig
deleted file mode 100644
index d01f1a6bd04d..000000000000
--- a/arch/arm/configs/h5000_defconfig
+++ /dev/null
@@ -1,74 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_UID16 is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_H5000=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="keepinitrd"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SA1100=y
-CONFIG_EXT2_FS=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig
deleted file mode 100644
index b9327b2eacd3..000000000000
--- a/arch/arm/configs/hackkit_defconfig
+++ /dev/null
@@ -1,47 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_HACKKIT=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttySA0,115200 root=/dev/ram0 initrd=0xc0400000,8M init=/rootshell"
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_MODULES=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=3
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/hardening.config b/arch/arm/configs/hardening.config
new file mode 100644
index 000000000000..327349ce6377
--- /dev/null
+++ b/arch/arm/configs/hardening.config
@@ -0,0 +1,7 @@
+# Basic kernel hardening options (specific to arm)
+
+# Make sure PXN/PAN emulation is enabled.
+CONFIG_CPU_SW_DOMAIN_PAN=y
+
+# Dangerous; old interfaces and needless additional attack surface.
+# CONFIG_OABI_COMPAT is not set
diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig
index 1db5356b1ccd..e19c1039fb93 100644
--- a/arch/arm/configs/hisi_defconfig
+++ b/arch/arm/configs/hisi_defconfig
@@ -1,4 +1,4 @@
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_BLK_DEV_INITRD=y
@@ -43,6 +43,7 @@ CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index bfa2a95638af..875c8cdbada7 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -12,11 +12,6 @@ CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MXC=y
-CONFIG_MACH_MX21ADS=y
-CONFIG_MACH_MX27ADS=y
-CONFIG_MACH_MX27_3DS=y
-CONFIG_MACH_IMX27_VISSTRIM_M10=y
-CONFIG_MACH_PCA100=y
 CONFIG_SOC_IMX1=y
 CONFIG_SOC_IMX25=y
 CONFIG_SOC_IMX27=y
@@ -26,7 +21,6 @@ CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_SWAP is not set
-CONFIG_SLAB=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -160,7 +154,7 @@ CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
 CONFIG_DMADEVICES=y
 CONFIG_IMX_DMA=y
-CONFIG_IMX_SDMA=y
+CONFIG_IMX_SDMA=m
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_FSL_MX25_ADC=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 01012537a9b9..9a57763a8d38 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -1,6 +1,5 @@
-CONFIG_KERNEL_LZO=y
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BPF_SYSCALL=y
 CONFIG_PREEMPT_VOLUNTARY=y
@@ -13,6 +12,7 @@ CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_IMX31=y
@@ -31,9 +31,8 @@ CONFIG_SOC_VF610=y
 CONFIG_SMP=y
 CONFIG_ARM_PSCI=y
 CONFIG_HIGHMEM=y
-CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_ARCH_FORCE_MAX_ORDER=13
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
-CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
@@ -65,11 +64,12 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_NETFILTER=y
 CONFIG_CAN=y
-CONFIG_CAN_FLEXCAN=y
 CONFIG_BT=y
 CONFIG_BT_BNEP=m
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_BCM=y
+CONFIG_BT_NXPUART=m
 CONFIG_CFG80211=y
 CONFIG_CFG80211_WEXT=y
 CONFIG_MAC80211=y
@@ -77,12 +77,10 @@ CONFIG_RFKILL=y
 CONFIG_RFKILL_INPUT=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
-CONFIG_PCI_IMX6=y
+CONFIG_PCI_IMX6_HOST=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
-CONFIG_FW_LOADER_USER_HELPER=y
-CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
 CONFIG_IMX_WEIM=y
 CONFIG_CONNECTOR=y
 CONFIG_MTD=y
@@ -129,13 +127,15 @@ CONFIG_CS89x0_PLATFORM=y
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_MICROCHIP is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_QCA7000_SPI=m
 # CONFIG_NET_VENDOR_SEEQ is not set
 CONFIG_SMC91X=y
-CONFIG_SMC911X=y
 CONFIG_SMSC911X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 CONFIG_MICREL_PHY=y
 CONFIG_AT803X_PHY=y
+CONFIG_DP83867_PHY=y
+CONFIG_CAN_FLEXCAN=y
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_RTL8152=y
@@ -153,9 +153,7 @@ CONFIG_MWIFIEX_PCIE=m
 CONFIG_WL12XX=m
 CONFIG_WL18XX=m
 CONFIG_WLCORE_SDIO=m
-# CONFIG_WILINK_PLATFORM_DATA is not set
 CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=m
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_SNVS_PWRKEY=y
 CONFIG_KEYBOARD_IMX=y
@@ -166,6 +164,7 @@ CONFIG_TOUCHSCREEN_ADS7846=y
 CONFIG_TOUCHSCREEN_AD7879=y
 CONFIG_TOUCHSCREEN_AD7879_I2C=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_CYTTSP5=y
 CONFIG_TOUCHSCREEN_DA9052=y
 CONFIG_TOUCHSCREEN_EGALAX=y
 CONFIG_TOUCHSCREEN_GOODIX=y
@@ -181,6 +180,8 @@ CONFIG_TOUCHSCREEN_SX8654=y
 CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MMA8450=y
+CONFIG_INPUT_GPIO_BEEPER=m
+CONFIG_INPUT_PWM_BEEPER=y
 CONFIG_SERIO_SERPORT=m
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_IMX=y
@@ -188,9 +189,7 @@ CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_FSL_LPUART=y
 CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
 CONFIG_SERIAL_DEV_BUS=y
-# CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_GPIO=y
 # CONFIG_I2C_HELPER_AUTO is not set
 CONFIG_I2C_ALGOPCF=m
@@ -202,28 +201,31 @@ CONFIG_SPI_FSL_QUADSPI=y
 CONFIG_SPI_GPIO=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_FSL_DSPI=y
-CONFIG_PINCTRL_IMX8MM=y
-CONFIG_PINCTRL_IMX8MN=y
-CONFIG_PINCTRL_IMX8MP=y
-CONFIG_PINCTRL_IMX8MQ=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_MXC=y
 CONFIG_GPIO_SIOX=m
 CONFIG_GPIO_MAX732X=y
 CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_PCF857X=y
+CONFIG_GPIO_BD71815=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_74X164=y
+CONFIG_W1=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_SLAVE_THERM=m
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_POWER_RESET_SYSCON_POWEROFF=y
-CONFIG_POWER_SUPPLY=y
 CONFIG_RN5T618_POWER=m
 CONFIG_SENSORS_MC13783_ADC=y
 CONFIG_SENSORS_GPIO_FAN=y
 CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_PWM_FAN=y
+CONFIG_SENSORS_SY7636A=y
 CONFIG_THERMAL_STATISTICS=y
-CONFIG_THERMAL_WRITABLE_TRIPS=y
 CONFIG_CPU_THERMAL=y
 CONFIG_IMX_THERMAL=y
 CONFIG_WATCHDOG=y
@@ -237,10 +239,14 @@ CONFIG_MFD_DA9062=y
 CONFIG_MFD_DA9063=y
 CONFIG_MFD_MC13XXX_SPI=y
 CONFIG_MFD_MC13XXX_I2C=y
+CONFIG_MFD_SY7636A=y
 CONFIG_MFD_RN5T618=y
 CONFIG_MFD_STMPE=y
+CONFIG_MFD_ROHM_BD71828=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_ANATOP=y
+CONFIG_REGULATOR_BD71815=y
+CONFIG_REGULATOR_BD71828=y
 CONFIG_REGULATOR_DA9052=y
 CONFIG_REGULATOR_DA9062=y
 CONFIG_REGULATOR_DA9063=y
@@ -250,6 +256,7 @@ CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_REGULATOR_PFUZE100=y
 CONFIG_REGULATOR_RN5T618=y
+CONFIG_REGULATOR_SY7636A=y
 CONFIG_RC_CORE=y
 CONFIG_RC_DEVICES=y
 CONFIG_IR_GPIO_CIR=y
@@ -269,9 +276,13 @@ CONFIG_IMX_IPUV3_CORE=y
 CONFIG_DRM=y
 CONFIG_DRM_MSM=y
 CONFIG_DRM_PANEL_LVDS=y
-CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
+CONFIG_DRM_PANEL_EDP=y
+CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_DISPLAY_CONNECTOR=y
+CONFIG_DRM_I2C_NXP_TDA998X=y
+CONFIG_DRM_LVDS_CODEC=m
+CONFIG_DRM_SII902X=y
 CONFIG_DRM_TI_TFP410=y
 CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
 CONFIG_DRM_DW_HDMI_CEC=y
@@ -287,9 +298,9 @@ CONFIG_FB_MODE_HELPERS=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
 CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_GPIO=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
@@ -300,10 +311,10 @@ CONFIG_SND_IMX_SOC=y
 CONFIG_SND_SOC_EUKREA_TLV320=y
 CONFIG_SND_SOC_IMX_ES8328=y
 CONFIG_SND_SOC_IMX_SGTL5000=y
-CONFIG_SND_SOC_IMX_SPDIF=y
 CONFIG_SND_SOC_FSL_ASOC_CARD=y
 CONFIG_SND_SOC_AC97_CODEC=y
 CONFIG_SND_SOC_CS42XX8_I2C=y
+CONFIG_SND_SOC_SPDIF=y
 CONFIG_SND_SOC_TLV320AIC3X_I2C=y
 CONFIG_SND_SOC_WM8960=y
 CONFIG_SND_SOC_WM8962=y
@@ -325,6 +336,8 @@ CONFIG_USB_SERIAL_FTDI_SIO=m
 CONFIG_USB_SERIAL_OPTION=m
 CONFIG_USB_TEST=m
 CONFIG_USB_EHSET_TEST_FIXTURE=m
+CONFIG_USB_HSIC_USB3503=y
+CONFIG_USB_ONBOARD_DEV=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_MXS_PHY=y
 CONFIG_USB_GADGET=y
@@ -358,11 +371,8 @@ CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
@@ -376,6 +386,7 @@ CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_PCF8523=y
 CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_M41T80=y
+CONFIG_RTC_DRV_BD70528=y
 CONFIG_RTC_DRV_RC5T619=y
 CONFIG_RTC_DRV_RV3029C2=y
 CONFIG_RTC_DRV_DA9063=y
@@ -392,12 +403,15 @@ CONFIG_STAGING=y
 CONFIG_STAGING_MEDIA=y
 CONFIG_VIDEO_IMX_MEDIA=y
 CONFIG_COMMON_CLK_PWM=y
+CONFIG_COMMON_CLK_BD718XX=y
 CONFIG_CLK_IMX8MM=y
 CONFIG_CLK_IMX8MN=y
 CONFIG_CLK_IMX8MP=y
 CONFIG_CLK_IMX8MQ=y
 CONFIG_SOC_IMX8M=y
+CONFIG_EXTCON_USB_GPIO=y
 CONFIG_IIO=y
+CONFIG_IIO_ST_ACCEL_3AXIS=m
 CONFIG_MMA8452=y
 CONFIG_IMX7D_ADC=y
 CONFIG_RN5T618_ADC=y
@@ -411,8 +425,8 @@ CONFIG_PWM_FSL_FTM=y
 CONFIG_PWM_IMX27=y
 CONFIG_PWM_IMX_TPM=y
 CONFIG_NVMEM_IMX_OCOTP=y
-CONFIG_NVMEM_VF610_OCOTP=y
 CONFIG_NVMEM_SNVS_LPGPR=y
+CONFIG_NVMEM_VF610_OCOTP=y
 CONFIG_TEE=y
 CONFIG_OPTEE=y
 CONFIG_MUX_MMIO=y
@@ -427,8 +441,7 @@ CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS_FS=y
 CONFIG_FUSE_FS=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
@@ -455,10 +468,6 @@ CONFIG_SECURITYFS=y
 CONFIG_CRYPTO_DEV_FSL_CAAM=y
 CONFIG_CRYPTO_DEV_SAHARA=y
 CONFIG_CRYPTO_DEV_MXS_DCP=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
@@ -468,6 +477,4 @@ CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 # CONFIG_SLUB_DEBUG is not set
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_PROVE_LOCKING=y
 # CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig
index 9ca43c84b452..61711d4bbf74 100644
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
deleted file mode 100644
index c16e92cdfd00..000000000000
--- a/arch/arm/configs/iop32x_defconfig
+++ /dev/null
@@ -1,127 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_IOP32X=y
-CONFIG_MACH_GLANTANK=y
-CONFIG_ARCH_IQ80321=y
-CONFIG_ARCH_IQ31244=y
-CONFIG_MACH_N2100=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_SATA_VITESSE=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_E100=y
-CONFIG_E1000=y
-CONFIG_R8169=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IOP3XX=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_DMADEVICES=y
-CONFIG_INTEL_IOP_ADMA=y
-CONFIG_NET_DMA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_TMPFS=y
-CONFIG_ECRYPT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_KEYS=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_LIBCRC32C=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index 6b65ac2a72e7..3cb995b9616a 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -99,7 +99,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index 3dcf89d3e1f1..e6ec768f42e2 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -1,12 +1,11 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_JORNADA720=y
 CONFIG_SA1100_JORNADA720_SSP=y
-CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
 CONFIG_PM=y
 CONFIG_MODULES=y
 CONFIG_NET=y
@@ -26,7 +25,6 @@ CONFIG_ATA=y
 CONFIG_PATA_PCMCIA=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_NET_PCMCIA=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 68b89b90ca29..c1291ca290b2 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -12,9 +12,9 @@ CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
+CONFIG_BASE_SMALL=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PROFILING=y
 CONFIG_ARCH_KEYSTONE=y
 CONFIG_ARM_LPAE=y
@@ -98,7 +98,6 @@ CONFIG_IP_NF_MATCH_TTL=y
 CONFIG_IP_NF_FILTER=y
 CONFIG_IP_NF_TARGET_REJECT=y
 CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_CLUSTERIP=y
 CONFIG_IP_NF_TARGET_ECN=y
 CONFIG_IP_NF_TARGET_TTL=y
 CONFIG_IP_NF_RAW=y
@@ -109,8 +108,6 @@ CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP_SCTP=y
 CONFIG_VLAN_8021Q=y
 CONFIG_CAN=m
-CONFIG_CAN_C_CAN=m
-CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
 CONFIG_DEVTMPFS=y
@@ -137,6 +134,8 @@ CONFIG_TI_KEYSTONE_NETCP_ETHSS=y
 CONFIG_MARVELL_PHY=y
 CONFIG_MICREL_PHY=y
 CONFIG_DP83867_PHY=y
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_GPIO_DECODER=m
@@ -152,7 +151,6 @@ CONFIG_SPI=y
 CONFIG_SPI_CADENCE_QUADSPI=y
 CONFIG_SPI_DAVINCI=y
 CONFIG_SPI_SPIDEV=y
-CONFIG_PTP_1588_CLOCK=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
@@ -208,7 +206,7 @@ CONFIG_RESET_TI_SYSCON=m
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_FANOTIFY=y
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
@@ -224,17 +222,17 @@ CONFIG_NFSD=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_CRYPTO_USER=y
 CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_CTR=y
 CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_CRYPTO_USER_API_HASH=y
 CONFIG_CRYPTO_USER_API_SKCIPHER=y
 CONFIG_DMA_CMA=y
 CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig
deleted file mode 100644
index 0c2f19d756c0..000000000000
--- a/arch/arm/configs/lart_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_LART=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttySA0,9600 root=/dev/ram"
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_PM=y
-CONFIG_MODULES=y
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_LART=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFSD=m
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_USER=y
-CONFIG_CRC32=m
diff --git a/arch/arm/configs/lpae.config b/arch/arm/configs/lpae.config
new file mode 100644
index 000000000000..1ab94da8345d
--- /dev/null
+++ b/arch/arm/configs/lpae.config
@@ -0,0 +1,3 @@
+# Help: Enable Large Physical Address Extension mode
+CONFIG_ARM_LPAE=y
+CONFIG_VMSPLIT_2G=y
diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig
index 142c1700f450..2d489186e945 100644
--- a/arch/arm/configs/lpc18xx_defconfig
+++ b/arch/arm/configs/lpc18xx_defconfig
@@ -8,13 +8,13 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_LZ4 is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_UID16 is not set
-# CONFIG_BASE_FULL is not set
+CONFIG_BASE_SMALL=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_MMU is not set
 CONFIG_ARCH_LPC18XX=y
 CONFIG_SET_MEM_PARAM=y
@@ -147,12 +147,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_INOTIFY_USER is not set
 CONFIG_JFFS2_FS=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 # CONFIG_SLUB_DEBUG is not set
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
index 8a41fe4e62f1..9afccd76446b 100644
--- a/arch/arm/configs/lpc32xx_defconfig
+++ b/arch/arm/configs/lpc32xx_defconfig
@@ -1,15 +1,13 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_LPC32XX=y
 CONFIG_AEABI=y
@@ -23,7 +21,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -163,7 +160,7 @@ CONFIG_MAX517=y
 CONFIG_PWM=y
 CONFIG_PWM_LPC32XX=y
 CONFIG_EXT2_FS=y
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
@@ -182,7 +179,6 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
deleted file mode 100644
index b0c21a99a0a8..000000000000
--- a/arch/arm/configs/lpd270_defconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_LOGICPD_PXA270=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_PXA2XX_AC97=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig
deleted file mode 100644
index 4fc744c96196..000000000000
--- a/arch/arm/configs/lubbock_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_LUBBOCK=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=y
-CONFIG_SMC91X=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_SA1111=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_G_SERIAL=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
deleted file mode 100644
index 9cbb63c69436..000000000000
--- a/arch/arm/configs/magician_defconfig
+++ /dev/null
@@ -1,151 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_PREEMPT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_UID16 is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_H4700=y
-CONFIG_MACH_MAGICIAN=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="keepinitrd"
-CONFIG_KEXEC=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NETDEVICES=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_MPPE=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_PXA=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_PXA=y
-CONFIG_W1_MASTER_DS1WM=y
-CONFIG_HTC_EGPIO=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PDA_POWER=y
-CONFIG_BATTERY_DS2760=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_ASIC3=y
-CONFIG_HTC_PASIC3=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_OVERLAY=y
-CONFIG_FB_W100=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_USB=y
-CONFIG_USB_MON=m
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GPIO_VBUS=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_USB_PXA27X=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DEBUG=y
-CONFIG_RTC_DRV_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig
deleted file mode 100644
index 096cd7bc667a..000000000000
--- a/arch/arm/configs/mainstone_defconfig
+++ /dev/null
@@ -1,51 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_MAINSTONE=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig
index 58810e98de3d..a2995eb390c6 100644
--- a/arch/arm/configs/milbeaut_m10v_defconfig
+++ b/arch/arm/configs/milbeaut_m10v_defconfig
@@ -1,9 +1,9 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 CONFIG_ARCH_MILBEAUT=y
 CONFIG_ARCH_MILBEAUT_M10V=y
@@ -26,7 +26,7 @@ CONFIG_THUMB2_KERNEL=y
 # CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11 is not set
 # CONFIG_ARM_PATCH_IDIV is not set
 CONFIG_HIGHMEM=y
-CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=11
 CONFIG_SECCOMP=y
 CONFIG_KEXEC=y
 CONFIG_EFI=y
@@ -44,17 +44,6 @@ CONFIG_ARM_CPUIDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM_NEON=m
-CONFIG_CRYPTO_SHA1_ARM_CE=m
-CONFIG_CRYPTO_SHA2_ARM_CE=m
-CONFIG_CRYPTO_SHA512_ARM=m
-CONFIG_CRYPTO_AES_ARM=m
-CONFIG_CRYPTO_AES_ARM_BS=m
-CONFIG_CRYPTO_AES_ARM_CE=m
-CONFIG_CRYPTO_GHASH_ARM_CE=m
-CONFIG_CRYPTO_CRC32_ARM_CE=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
@@ -92,7 +81,7 @@ CONFIG_SOC_BRCMSTB=y
 CONFIG_MEMORY=y
 # CONFIG_ARM_PMU is not set
 CONFIG_EXT4_FS=y
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
@@ -104,14 +93,15 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_KEYS=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
-CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_SELFTESTS=y
 # CONFIG_CRYPTO_ECHAINIV is not set
 CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_GHASH_ARM_CE=m
+CONFIG_CRYPTO_AES_ARM=m
+CONFIG_CRYPTO_AES_ARM_BS=m
+CONFIG_CRYPTO_AES_ARM_CE=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_ITU_T=m
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_PRINTK_TIME=y
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
deleted file mode 100644
index 86e00f684e16..000000000000
--- a/arch/arm/configs/mini2440_defconfig
+++ /dev/null
@@ -1,338 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_ARCH_MULTI_V4T=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_S3C24XX=y
-CONFIG_S3C_ADC=y
-# CONFIG_CPU_S3C2410 is not set
-CONFIG_CPU_S3C2440=y
-CONFIG_MACH_MINI2440=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_KEXEC=y
-CONFIG_CPU_IDLE=y
-CONFIG_APM_EMULATION=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_BINFMT_MISC=m
-# CONFIG_COMPAT_BRK is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_DIAG=m
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_NET_PKTGEN=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_MESH=y
-CONFIG_MAC80211_LEDS=y
-CONFIG_CONNECTOR=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_NFTL=y
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=y
-CONFIG_RFD_FTL=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_S3C2410=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_LPDDR=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_SENSORS_TSL2550=m
-CONFIG_EEPROM_AT24=y
-CONFIG_SCSI=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_SG=m
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_DM9000=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MPPE=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_ZD1211RW=m
-CONFIG_ZD1211RW_DEBUG=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIO_RAW=y
-CONFIG_LEGACY_PTY_COUNT=128
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_DEV_BUS=m
-CONFIG_IPMI_HANDLER=m
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_S3C2410=y
-CONFIG_I2C_SIMTEC=y
-CONFIG_SPI=y
-CONFIG_SPI_S3C24XX=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_SENSORS_LM75=y
-CONFIG_THERMAL=y
-CONFIG_WATCHDOG=y
-CONFIG_S3C2410_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_S3C2410=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_SOC=y
-CONFIG_HIDRAW=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_TOPSEED=y
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_WDM=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_STORAGE_ALAUDA=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_CP210X=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_S3C2410=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_MMC=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SPI=y
-CONFIG_MMC_S3C=y
-CONFIG_LEDS_S3C24XX=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_S3C=y
-CONFIG_DMADEVICES=y
-CONFIG_S3C24XX_DMAC=y
-CONFIG_PWM=y
-CONFIG_PWM_SAMSUNG=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BOTH=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_LZO=m
-CONFIG_LIBCRC32C=m
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig
index 4d39c615117b..842a989baa27 100644
--- a/arch/arm/configs/mmp2_defconfig
+++ b/arch/arm/configs/mmp2_defconfig
@@ -2,7 +2,6 @@ CONFIG_SYSVIPC=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MMP=y
 CONFIG_AEABI=y
@@ -12,7 +11,6 @@ CONFIG_VFP=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -29,7 +27,6 @@ CONFIG_MTD_ONENAND_GENERIC=y
 CONFIG_MTD_RAW_NAND=y
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -70,13 +67,12 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 # CONFIG_DYNAMIC_DEBUG is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/moxart_defconfig b/arch/arm/configs/moxart_defconfig
index 082a38a14c12..fa06d98e43fc 100644
--- a/arch/arm/configs/moxart_defconfig
+++ b/arch/arm/configs/moxart_defconfig
@@ -1,16 +1,16 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_EXPERT=y
 # CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
+CONFIG_BASE_SMALL=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-CONFIG_EMBEDDED=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MULTI_V4=y
 # CONFIG_ARCH_MULTI_V7 is not set
@@ -118,7 +118,6 @@ CONFIG_TMPFS=y
 CONFIG_CONFIGFS_FS=y
 CONFIG_JFFS2_FS=y
 CONFIG_KEYS=y
-CONFIG_CRC32_BIT=y
 CONFIG_DMA_API_DEBUG=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
@@ -126,8 +125,8 @@ CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_KGDB=y
 CONFIG_DEBUG_PAGEALLOC=y
 # CONFIG_SLUB_DEBUG is not set
-CONFIG_DEBUG_OBJECTS=y
 CONFIG_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_OBJECTS=y
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_SHIRQ=y
diff --git a/arch/arm/configs/mps2_defconfig b/arch/arm/configs/mps2_defconfig
index 700568474549..e995e50537ef 100644
--- a/arch/arm/configs/mps2_defconfig
+++ b/arch/arm/configs/mps2_defconfig
@@ -5,7 +5,7 @@ CONFIG_LOG_BUF_SHIFT=16
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
-# CONFIG_BASE_FULL is not set
+CONFIG_BASE_SMALL=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
@@ -94,9 +94,9 @@ CONFIG_NFS_V4_2=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_FS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_SCHED_DEBUG is not set
diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig
index 6c3e45b71ab5..1a86dc305523 100644
--- a/arch/arm/configs/multi_v4t_defconfig
+++ b/arch/arm/configs/multi_v4t_defconfig
@@ -2,15 +2,15 @@ CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_ARCH_MULTI_V4T=y
 # CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_NSPIRE=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_AT91RM9200=y
 CONFIG_ARCH_CLPS711X=y
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_IMX1=y
-CONFIG_ARCH_NSPIRE=y
 CONFIG_ARCH_INTEGRATOR=y
 CONFIG_ARCH_INTEGRATOR_AP=y
 CONFIG_INTEGRATOR_IMPD1=y
@@ -25,7 +25,7 @@ CONFIG_ARM_CLPS711X_CPUIDLE=y
 CONFIG_JUMP_LABEL=y
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_COREDUMP is not set
-CONFIG_SLOB=y
+CONFIG_SLUB_TINY=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -71,8 +71,6 @@ CONFIG_POWER_RESET_SYSCON_POWEROFF=y
 CONFIG_WATCHDOG=y
 CONFIG_GPIO_WATCHDOG=y
 CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_FB=y
 CONFIG_FB_CLPS711X=y
@@ -93,6 +91,5 @@ CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_CRAMFS=y
 CONFIG_MINIX_FS=y
-CONFIG_CRC_CCITT=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index e0be0e0023f3..b523bc246c09 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=19
@@ -12,7 +12,6 @@ CONFIG_MACH_ASPEED_G4=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_AT91SAM9=y
 CONFIG_ARCH_DAVINCI=y
-CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_IMX25=y
@@ -49,6 +48,7 @@ CONFIG_ARM_KIRKWOOD_CPUIDLE=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
+CONFIG_IOSCHED_BFQ=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -61,8 +61,8 @@ CONFIG_NET_DSA=y
 CONFIG_NET_PKTGEN=m
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
-CONFIG_PCI_MVEBU=y
 CONFIG_PCI_VERSATILE=y
+CONFIG_PCI_MVEBU=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_IMX_WEIM=y
@@ -138,6 +138,7 @@ CONFIG_HW_RANDOM_TIMERIOMEM=m
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_ASPEED=m
 CONFIG_I2C_AT91=y
+CONFIG_I2C_GPIO=m
 CONFIG_I2C_IMX=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_SPI=y
@@ -149,7 +150,6 @@ CONFIG_SPI_SUN6I=y
 CONFIG_GPIO_ASPEED=m
 CONFIG_GPIO_ASPEED_SGPIO=y
 CONFIG_GPIO_MXC=y
-CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_QNAP=y
 CONFIG_SENSORS_ADT7475=y
@@ -288,10 +288,8 @@ CONFIG_NLS_UTF8=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 12b35008571f..12f706e2ded5 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -1,12 +1,15 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_VIRT=y
 CONFIG_ARCH_AIROHA=y
+CONFIG_ARCH_SUNPLUS=y
+CONFIG_ARCH_UNIPHIER=y
 CONFIG_ARCH_ACTIONS=y
 CONFIG_ARCH_ALPINE=y
 CONFIG_ARCH_ARTPEC=y
@@ -17,6 +20,7 @@ CONFIG_ARCH_AT91=y
 CONFIG_SOC_SAMA5D2=y
 CONFIG_SOC_SAMA5D3=y
 CONFIG_SOC_SAMA5D4=y
+CONFIG_SOC_SAMA7D65=y
 CONFIG_SOC_SAMA7G5=y
 CONFIG_SOC_LAN966=y
 CONFIG_ARCH_BCM=y
@@ -83,10 +87,6 @@ CONFIG_SOC_AM33XX=y
 CONFIG_SOC_AM43XX=y
 CONFIG_SOC_DRA7XX=y
 CONFIG_ARCH_QCOM=y
-CONFIG_ARCH_MSM8X60=y
-CONFIG_ARCH_MSM8916=y
-CONFIG_ARCH_MSM8960=y
-CONFIG_ARCH_MSM8974=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_INTEL_SOCFPGA=y
@@ -96,10 +96,8 @@ CONFIG_MACH_SPEAR1310=y
 CONFIG_MACH_SPEAR1340=y
 CONFIG_ARCH_STI=y
 CONFIG_ARCH_STM32=y
-CONFIG_ARCH_SUNPLUS=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_TEGRA=y
-CONFIG_ARCH_UNIPHIER=y
 CONFIG_ARCH_U8500=y
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_VEXPRESS_TC2_PM=y
@@ -109,7 +107,6 @@ CONFIG_SMP=y
 CONFIG_NR_CPUS=16
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_KEXEC=y
 CONFIG_EFI=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=y
@@ -132,21 +129,11 @@ CONFIG_ARM_EXYNOS_CPUIDLE=y
 CONFIG_ARM_TEGRA_CPUIDLE=y
 CONFIG_ARM_QCOM_SPM_CPUIDLE=y
 CONFIG_KERNEL_MODE_NEON=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM_NEON=m
-CONFIG_CRYPTO_SHA1_ARM_CE=m
-CONFIG_CRYPTO_SHA2_ARM_CE=m
-CONFIG_CRYPTO_SHA512_ARM=m
-CONFIG_CRYPTO_AES_ARM=m
-CONFIG_CRYPTO_AES_ARM_BS=m
-CONFIG_CRYPTO_AES_ARM_CE=m
-CONFIG_CRYPTO_GHASH_ARM_CE=m
-CONFIG_CRYPTO_CRC32_ARM_CE=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_CMDLINE_PARTITION=y
+CONFIG_IOSCHED_BFQ=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -167,12 +154,6 @@ CONFIG_NET_DSA=m
 CONFIG_QRTR=m
 CONFIG_QRTR_SMD=m
 CONFIG_CAN=y
-CONFIG_CAN_AT91=m
-CONFIG_CAN_FLEXCAN=m
-CONFIG_CAN_SUN4I=y
-CONFIG_CAN_XILINXCAN=y
-CONFIG_CAN_RCAR=m
-CONFIG_CAN_MCP251X=y
 CONFIG_BT=m
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_BCM=y
@@ -195,9 +176,11 @@ CONFIG_NFC_S3FWRN5_I2C=m
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCI_MVEBU=y
 CONFIG_PCI_TEGRA=y
-CONFIG_PCI_RCAR_GEN2=y
 CONFIG_PCIE_RCAR_HOST=y
+CONFIG_PCI_RCAR_GEN2=y
+CONFIG_PCI_LAYERSCAPE=y
 CONFIG_PCI_DRA7XX_EP=y
+CONFIG_PCI_KEYSTONE_HOST=y
 CONFIG_PCI_ENDPOINT=y
 CONFIG_PCI_ENDPOINT_CONFIGFS=y
 CONFIG_PCI_EPF_TEST=m
@@ -206,6 +189,7 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_OMAP_OCP2SCP=y
 CONFIG_ARM_SCMI_PROTOCOL=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_TI_SCI_PROTOCOL=y
 CONFIG_TRUSTED_FOUNDATIONS=y
 CONFIG_BCM47XX_NVRAM=y
 CONFIG_BCM47XX_SPROM=y
@@ -252,20 +236,22 @@ CONFIG_SATA_AHCI=y
 CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_AHCI_BRCM=y
 CONFIG_AHCI_DM816=y
+CONFIG_AHCI_DWC=m
 CONFIG_AHCI_ST=y
 CONFIG_AHCI_IMX=y
 CONFIG_AHCI_SUNXI=y
 CONFIG_AHCI_TEGRA=y
+CONFIG_AHCI_QORIQ=y
 CONFIG_SATA_HIGHBANK=y
 CONFIG_SATA_MV=y
 CONFIG_SATA_RCAR=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_VENDOR_ASIX=y
 CONFIG_VIRTIO_NET=y
 CONFIG_B53_SPI_DRIVER=m
 CONFIG_B53_MDIO_DRIVER=m
 CONFIG_B53_MMAP_DRIVER=m
 CONFIG_NET_DSA_BCM_SF2=m
+CONFIG_NET_DSA_RZN1_A5PSW=m
 CONFIG_SUN4I_EMAC=y
 CONFIG_SPI_AX88796C=m
 CONFIG_BCMGENET=m
@@ -285,6 +271,7 @@ CONFIG_KS8851=y
 CONFIG_LAN966X_SWITCH=m
 CONFIG_R8169=y
 CONFIG_SH_ETH=y
+CONFIG_RAVB=y
 CONFIG_SMSC911X=y
 CONFIG_SNI_AVE=y
 CONFIG_STMMAC_ETH=y
@@ -292,6 +279,8 @@ CONFIG_DWMAC_DWC_QOS_ETH=y
 CONFIG_TI_CPSW=y
 CONFIG_TI_CPSW_SWITCHDEV=y
 CONFIG_TI_CPTS=y
+CONFIG_TI_KEYSTONE_NETCP=y
+CONFIG_TI_KEYSTONE_NETCP_ETHSS=y
 CONFIG_XILINX_EMACLITE=y
 CONFIG_SFP=m
 CONFIG_BROADCOM_PHY=y
@@ -300,6 +289,14 @@ CONFIG_MARVELL_PHY=y
 CONFIG_AT803X_PHY=y
 CONFIG_ROCKCHIP_PHY=y
 CONFIG_DP83867_PHY=y
+CONFIG_CAN_AT91=m
+CONFIG_CAN_FLEXCAN=m
+CONFIG_CAN_SUN4I=y
+CONFIG_CAN_XILINXCAN=y
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_CAN_RCAR=m
+CONFIG_CAN_MCP251X=y
 CONFIG_MDIO_MSCC_MIIM=m
 CONFIG_USB_PEGASUS=y
 CONFIG_USB_RTL8152=m
@@ -322,6 +319,7 @@ CONFIG_KEYBOARD_PXA27x=m
 CONFIG_KEYBOARD_SAMSUNG=m
 CONFIG_KEYBOARD_ST_KEYSCAN=y
 CONFIG_KEYBOARD_SPEAR=y
+CONFIG_KEYBOARD_TM2_TOUCHKEY=m
 CONFIG_KEYBOARD_CROS_EC=m
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_MOUSE_CYAPA=m
@@ -331,6 +329,7 @@ CONFIG_TOUCHSCREEN_ADC=m
 CONFIG_TOUCHSCREEN_ATMEL_MXT=m
 CONFIG_TOUCHSCREEN_ELAN=m
 CONFIG_TOUCHSCREEN_MMS114=m
+CONFIG_TOUCHSCREEN_EDT_FT5X06=m
 CONFIG_TOUCHSCREEN_WM97XX=m
 CONFIG_TOUCHSCREEN_ST1232=m
 CONFIG_TOUCHSCREEN_STMPE=y
@@ -339,7 +338,9 @@ CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PM8941_PWRKEY=y
 CONFIG_INPUT_MAX77693_HAPTIC=m
 CONFIG_INPUT_MAX8997_HAPTIC=m
+CONFIG_INPUT_GPIO_DECODER=m
 CONFIG_INPUT_CPCAP_PWRBUTTON=m
+CONFIG_INPUT_TPS65219_PWRBUTTON=m
 CONFIG_INPUT_AXP20X_PEK=m
 CONFIG_INPUT_DA9063_ONKEY=m
 CONFIG_INPUT_ADXL34X=m
@@ -378,8 +379,6 @@ CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
 CONFIG_SERIAL_VT8500=y
 CONFIG_SERIAL_VT8500_CONSOLE=y
-CONFIG_SERIAL_OMAP=y
-CONFIG_SERIAL_OMAP_CONSOLE=y
 CONFIG_SERIAL_BCM63XX=y
 CONFIG_SERIAL_BCM63XX_CONSOLE=y
 CONFIG_SERIAL_XILINX_PS_UART=y
@@ -412,6 +411,7 @@ CONFIG_I2C_AT91=m
 CONFIG_I2C_BCM2835=y
 CONFIG_I2C_CADENCE=y
 CONFIG_I2C_DAVINCI=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_I2C_DIGICOLOR=m
 CONFIG_I2C_EMEV2=m
@@ -442,8 +442,10 @@ CONFIG_SPI_ATMEL_QUADSPI=m
 CONFIG_SPI_BCM2835=y
 CONFIG_SPI_BCM2835AUX=y
 CONFIG_SPI_CADENCE=y
+CONFIG_SPI_CADENCE_QUADSPI=y
 CONFIG_SPI_DAVINCI=y
 CONFIG_SPI_FSL_QUADSPI=m
+CONFIG_SPI_GXP=m
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_FSL_DSPI=m
 CONFIG_SPI_OMAP24XX=y
@@ -465,8 +467,8 @@ CONFIG_SPI_TEGRA20_SLINK=y
 CONFIG_SPI_XILINX=y
 CONFIG_SPI_SPIDEV=y
 CONFIG_SPMI=y
-CONFIG_PTP_1588_CLOCK=y
 CONFIG_PINCTRL_AS3722=y
+CONFIG_PINCTRL_MCP23S08=m
 CONFIG_PINCTRL_MICROCHIP_SGPIO=y
 CONFIG_PINCTRL_OCELOT=y
 CONFIG_PINCTRL_PALMAS=y
@@ -484,10 +486,12 @@ CONFIG_PINCTRL_MSM8916=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
 CONFIG_PINCTRL_RZA2=y
+CONFIG_PINCTRL_RZN1=y
 CONFIG_GPIO_ASPEED_SGPIO=y
 CONFIG_GPIO_DAVINCI=y
 CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_EM=y
+CONFIG_GPIO_MPC8XXX=y
 CONFIG_GPIO_MXC=y
 CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_SYSCON=y
@@ -498,6 +502,7 @@ CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_GPIO_PALMAS=y
+CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
 CONFIG_GPIO_TWL4030=y
@@ -527,6 +532,7 @@ CONFIG_CHARGER_TPS65090=y
 CONFIG_BATTERY_ACER_A500=m
 CONFIG_SENSORS_ARM_SCMI=y
 CONFIG_SENSORS_ASPEED=m
+CONFIG_SENSORS_GXP_FAN_CTRL=m
 CONFIG_SENSORS_IIO_HWMON=y
 CONFIG_SENSORS_LAN966X=m
 CONFIG_SENSORS_LM90=y
@@ -538,6 +544,7 @@ CONFIG_SENSORS_INA2XX=m
 CONFIG_CPU_THERMAL=y
 CONFIG_DEVFREQ_THERMAL=y
 CONFIG_IMX_THERMAL=y
+CONFIG_QORIQ_THERMAL=m
 CONFIG_ROCKCHIP_THERMAL=y
 CONFIG_RCAR_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
@@ -569,6 +576,7 @@ CONFIG_MESON_WATCHDOG=y
 CONFIG_DIGICOLOR_WATCHDOG=y
 CONFIG_RENESAS_WDT=m
 CONFIG_RENESAS_RZAWDT=m
+CONFIG_RENESAS_RZN1WDT=m
 CONFIG_STPMIC1_WATCHDOG=y
 CONFIG_PM8916_WATCHDOG=m
 CONFIG_BCM47XX_WDT=y
@@ -599,14 +607,15 @@ CONFIG_MFD_CPCAP=y
 CONFIG_MFD_PM8XXX=y
 CONFIG_MFD_QCOM_RPM=y
 CONFIG_MFD_SPMI_PMIC=y
-CONFIG_MFD_RK808=y
+CONFIG_MFD_RK8XX_I2C=y
 CONFIG_MFD_RN5T618=y
-CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SEC_I2C=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65090=y
 CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TPS65218=y
+CONFIG_MFD_TPS65219=y
 CONFIG_MFD_TPS6586X=y
 CONFIG_MFD_TPS65910=y
 CONFIG_MFD_STM32_LPTIMER=m
@@ -616,6 +625,7 @@ CONFIG_REGULATOR_ACT8865=y
 CONFIG_REGULATOR_ACT8945A=y
 CONFIG_REGULATOR_ANATOP=y
 CONFIG_REGULATOR_AB8500=y
+CONFIG_REGULATOR_ARM_SCMI=y
 CONFIG_REGULATOR_AS3711=y
 CONFIG_REGULATOR_AS3722=y
 CONFIG_REGULATOR_AXP20X=y
@@ -655,6 +665,7 @@ CONFIG_REGULATOR_TPS62360=y
 CONFIG_REGULATOR_TPS65090=y
 CONFIG_REGULATOR_TPS65217=y
 CONFIG_REGULATOR_TPS65218=y
+CONFIG_REGULATOR_TPS65219=y
 CONFIG_REGULATOR_TPS6586X=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_REGULATOR_TWL4030=y
@@ -668,11 +679,11 @@ CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_ASPEED=m
-CONFIG_VIDEO_ATMEL_ISC=m
-CONFIG_VIDEO_ATMEL_XISC=m
 CONFIG_VIDEO_ATMEL_ISI=m
-CONFIG_VIDEO_MICROCHIP_CSI2DC=m
 CONFIG_VIDEO_MMP_CAMERA=m
+CONFIG_VIDEO_MICROCHIP_ISC=m
+CONFIG_VIDEO_MICROCHIP_XISC=m
+CONFIG_VIDEO_MICROCHIP_CSI2DC=m
 CONFIG_VIDEO_TEGRA_VDE=m
 CONFIG_VIDEO_RENESAS_CEU=m
 CONFIG_VIDEO_RCAR_VIN=m
@@ -691,18 +702,21 @@ CONFIG_VIDEO_STI_BDISP=m
 CONFIG_VIDEO_STI_DELTA=m
 CONFIG_VIDEO_STI_HVA=m
 CONFIG_VIDEO_STM32_DCMI=m
+CONFIG_VIDEO_STM32_DCMIPP=m
 CONFIG_V4L_TEST_DRIVERS=y
 CONFIG_VIDEO_VIVID=m
+CONFIG_VIDEO_S5C73M3=m
+CONFIG_VIDEO_S5K6A3=m
 CONFIG_VIDEO_ADV7180=m
 CONFIG_VIDEO_ADV7604=m
 CONFIG_VIDEO_ADV7604_CEC=y
 CONFIG_VIDEO_ML86V7667=m
 CONFIG_IMX_IPUV3_CORE=m
 CONFIG_DRM=y
-# CONFIG_DRM_I2C_CH7006 is not set
-# CONFIG_DRM_I2C_SIL164 is not set
 CONFIG_DRM_I2C_NXP_TDA998X=m
 CONFIG_DRM_NOUVEAU=m
+# CONFIG_DRM_NOUVEAU_CH7006 is not set
+# CONFIG_DRM_NOUVEAU_SIL164 is not set
 CONFIG_DRM_EXYNOS=m
 CONFIG_DRM_EXYNOS_FIMD=y
 CONFIG_DRM_EXYNOS_MIXER=y
@@ -716,8 +730,9 @@ CONFIG_ROCKCHIP_DW_MIPI_DSI=y
 CONFIG_ROCKCHIP_INNO_HDMI=y
 CONFIG_DRM_ATMEL_HLCDC=m
 CONFIG_DRM_RCAR_DU=m
-CONFIG_DRM_RCAR_LVDS=y
 CONFIG_DRM_SUN4I=m
+CONFIG_DRM_OMAP=m
+CONFIG_OMAP5_DSS_HDMI=y
 CONFIG_DRM_MSM=m
 CONFIG_DRM_FSL_DCU=m
 CONFIG_DRM_TEGRA=y
@@ -741,6 +756,8 @@ CONFIG_DRM_SII9234=m
 CONFIG_DRM_SIMPLE_BRIDGE=m
 CONFIG_DRM_TOSHIBA_TC358764=m
 CONFIG_DRM_TOSHIBA_TC358768=m
+CONFIG_DRM_TI_TFP410=m
+CONFIG_DRM_TI_TPD12S015=m
 CONFIG_DRM_I2C_ADV7511=m
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
 CONFIG_DRM_STI=m
@@ -762,6 +779,7 @@ CONFIG_FB_EFI=y
 CONFIG_FB_WM8505=y
 CONFIG_FB_SH_MOBILE_LCDC=y
 CONFIG_FB_SIMPLE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_AS3711=y
 CONFIG_BACKLIGHT_GPIO=y
@@ -773,7 +791,12 @@ CONFIG_SND_HDA_TEGRA=m
 CONFIG_SND_HDA_INPUT_BEEP=y
 CONFIG_SND_HDA_PATCH_LOADER=y
 CONFIG_SND_HDA_CODEC_REALTEK=m
+CONFIG_SND_HDA_CODEC_REALTEK_LIB=m
+CONFIG_SND_HDA_CODEC_ALC269=m
 CONFIG_SND_HDA_CODEC_HDMI=m
+CONFIG_SND_HDA_CODEC_HDMI_GENERIC=m
+CONFIG_SND_HDA_CODEC_HDMI_NVIDIA=m
+CONFIG_SND_HDA_CODEC_HDMI_TEGRA=m
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_SOC=m
 CONFIG_SND_ATMEL_SOC=m
@@ -783,7 +806,6 @@ CONFIG_SND_ATMEL_SOC_I2S=m
 CONFIG_SND_BCM2835_SOC_I2S=m
 CONFIG_SND_IMX_SOC=m
 CONFIG_SND_SOC_FSL_ASOC_CARD=m
-CONFIG_SND_SOC_FSL_SAI=m
 CONFIG_SND_PXA_SOC_SSP=m
 CONFIG_SND_MMP_SOC_SSPA=m
 CONFIG_SND_PXA910_SOC=m
@@ -820,7 +842,7 @@ CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
 CONFIG_SND_SOC_TEGRA_ALC5632=m
 CONFIG_SND_SOC_TEGRA_MAX98090=m
 CONFIG_SND_SOC_DAVINCI_MCASP=m
-CONFIG_SND_SOC_AC97=m
+CONFIG_SND_SOC_AC97_CODEC=m
 CONFIG_SND_SOC_AK4642=m
 CONFIG_SND_SOC_CPCAP=m
 CONFIG_SND_SOC_CS42L51_I2C=m
@@ -828,6 +850,11 @@ CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
 CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
 CONFIG_SND_SOC_SGTL5000=m
 CONFIG_SND_SOC_STI_SAS=m
+CONFIG_SND_SOC_TLV320AIC32X4=m
+CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
+CONFIG_SND_SOC_TLV320AIC3X_I2C=m
+CONFIG_SND_SOC_WM8960=m
+CONFIG_SND_SOC_WM8962=m
 CONFIG_SND_SOC_WM8978=m
 CONFIG_SND_AUDIO_GRAPH_CARD=m
 CONFIG_USB=y
@@ -837,6 +864,7 @@ CONFIG_USB_XHCI_MVEBU=y
 CONFIG_USB_XHCI_TEGRA=m
 CONFIG_USB_BRCMSTB=m
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_FSL=m
 CONFIG_USB_EHCI_HCD_STI=y
 CONFIG_USB_EHCI_EXYNOS=m
 CONFIG_USB_EHCI_MV=m
@@ -851,7 +879,6 @@ CONFIG_USB_MUSB_HDRC=m
 CONFIG_USB_MUSB_SUNXI=m
 CONFIG_USB_MUSB_TUSB6010=m
 CONFIG_USB_MUSB_OMAP2PLUS=m
-CONFIG_USB_MUSB_AM35X=m
 CONFIG_USB_MUSB_DSPS=m
 CONFIG_USB_MUSB_UX500=m
 CONFIG_USB_UX500_DMA=y
@@ -865,7 +892,7 @@ CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_USB_ISP1760=y
 CONFIG_USB_HSIC_USB3503=y
-CONFIG_USB_ONBOARD_HUB=m
+CONFIG_USB_ONBOARD_DEV=m
 CONFIG_AB8500_USB=y
 CONFIG_KEYSTONE_USB_PHY=m
 CONFIG_NOP_USB_XCEIV=y
@@ -875,8 +902,8 @@ CONFIG_USB_GPIO_VBUS=y
 CONFIG_USB_ISP1301=y
 CONFIG_USB_MXS_PHY=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_FSL_USB2=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_RENESAS_USBF=m
 CONFIG_USB_ASPEED_VHUB=m
 CONFIG_USB_CONFIGFS=m
 CONFIG_USB_CONFIGFS_SERIAL=y
@@ -899,6 +926,8 @@ CONFIG_USB_CONFIGFS_F_UVC=y
 CONFIG_USB_CONFIGFS_F_PRINTER=y
 CONFIG_USB_ETH=m
 CONFIG_TYPEC=m
+CONFIG_TYPEC_UCSI=m
+CONFIG_UCSI_STM32G0=m
 CONFIG_TYPEC_STUSB160X=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=16
@@ -939,6 +968,8 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_CLASS_FLASH=m
 CONFIG_LEDS_CPCAP=m
+CONFIG_LEDS_PCA9532=m
+CONFIG_LEDS_PCA9532_GPIO=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
 CONFIG_LEDS_MAX8997=m
@@ -955,6 +986,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_LEDS_TRIGGER_TRANSIENT=y
 CONFIG_LEDS_TRIGGER_CAMERA=y
 CONFIG_EDAC=y
+CONFIG_EDAC_LAYERSCAPE=y
 CONFIG_EDAC_HIGHBANK_MC=y
 CONFIG_EDAC_HIGHBANK_L2=y
 CONFIG_RTC_CLASS=y
@@ -968,6 +1000,7 @@ CONFIG_RTC_DRV_MAX8997=m
 CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_RK808=m
 CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_PCF85063=m
 CONFIG_RTC_DRV_PCF85363=m
 CONFIG_RTC_DRV_BQ32K=m
 CONFIG_RTC_DRV_TWL4030=y
@@ -987,6 +1020,7 @@ CONFIG_RTC_DRV_SH=m
 CONFIG_RTC_DRV_PL031=y
 CONFIG_RTC_DRV_AT91RM9200=m
 CONFIG_RTC_DRV_AT91SAM9=m
+CONFIG_RTC_DRV_RZN1=m
 CONFIG_RTC_DRV_VT8500=y
 CONFIG_RTC_DRV_SUNXI=y
 CONFIG_RTC_DRV_MV=y
@@ -1018,6 +1052,7 @@ CONFIG_UNIPHIER_MDMAC=y
 CONFIG_XILINX_DMA=y
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_DW_DMAC=y
+CONFIG_RZN1_DMAMUX=m
 CONFIG_RCAR_DMAC=y
 CONFIG_RENESAS_USB_DMAC=m
 CONFIG_VIRTIO_PCI=y
@@ -1028,7 +1063,6 @@ CONFIG_KEYBOARD_NVEC=y
 CONFIG_SERIO_NVEC_PS2=y
 CONFIG_NVEC_POWER=y
 CONFIG_NVEC_PAZ00=y
-CONFIG_STAGING_BOARD=y
 CONFIG_CHROME_PLATFORMS=y
 CONFIG_CROS_EC=m
 CONFIG_CROS_EC_I2C=m
@@ -1050,31 +1084,40 @@ CONFIG_MSM_GCC_8916=y
 CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
 CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_OMAP=y
 CONFIG_HWSPINLOCK_QCOM=y
-CONFIG_MICROCHIP_PIT64B=y
+CONFIG_OMAP2PLUS_MBOX=y
 CONFIG_BCM2835_MBOX=y
+CONFIG_TI_MESSAGE_MANAGER=y
 CONFIG_QCOM_APCS_IPC=y
+CONFIG_STM32_IPCC=m
 CONFIG_QCOM_IPCC=y
+CONFIG_OMAP_IOMMU=y
+CONFIG_OMAP_IOMMU_DEBUG=y
 CONFIG_ROCKCHIP_IOMMU=y
-CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_EXYNOS_IOMMU=y
 CONFIG_QCOM_IOMMU=y
 CONFIG_REMOTEPROC=y
+CONFIG_OMAP_REMOTEPROC=m
+CONFIG_OMAP_REMOTEPROC_WATCHDOG=y
+CONFIG_KEYSTONE_REMOTEPROC=m
 CONFIG_QCOM_Q6V5_MSS=m
 CONFIG_QCOM_SYSMON=m
 CONFIG_QCOM_WCNSS_PIL=m
 CONFIG_ST_REMOTEPROC=m
+CONFIG_RPMSG_CHAR=m
+CONFIG_RPMSG_CTRL=m
 CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_RPMSG_VIRTIO=m
 CONFIG_ASPEED_LPC_CTRL=m
 CONFIG_ASPEED_LPC_SNOOP=m
 CONFIG_ASPEED_P2A_CTRL=m
-CONFIG_RASPBERRYPI_POWER=y
-CONFIG_QCOM_CPR=y
+CONFIG_QCOM_COMMAND_DB=m
 CONFIG_QCOM_GSBI=y
+CONFIG_QCOM_OCMEM=m
 CONFIG_QCOM_RMTFS_MEM=m
-CONFIG_QCOM_RPMPD=y
+CONFIG_QCOM_RPMH=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
@@ -1082,31 +1125,20 @@ CONFIG_QCOM_SMSM=y
 CONFIG_QCOM_SOCINFO=m
 CONFIG_QCOM_STATS=m
 CONFIG_QCOM_WCNSS_CTRL=m
-CONFIG_ARCH_EMEV2=y
-CONFIG_ARCH_R8A7794=y
-CONFIG_ARCH_R8A7779=y
-CONFIG_ARCH_R8A7790=y
-CONFIG_ARCH_R8A7778=y
-CONFIG_ARCH_R8A7793=y
-CONFIG_ARCH_R8A7791=y
-CONFIG_ARCH_R8A7792=y
-CONFIG_ARCH_R8A7740=y
-CONFIG_ARCH_R8A73A4=y
-CONFIG_ARCH_R7S72100=y
-CONFIG_ARCH_R7S9210=y
-CONFIG_ARCH_R8A77470=y
-CONFIG_ARCH_R8A7745=y
-CONFIG_ARCH_R8A7742=y
-CONFIG_ARCH_R8A7743=y
-CONFIG_ARCH_R8A7744=y
-CONFIG_ARCH_R9A06G032=y
-CONFIG_ARCH_SH73A0=y
 CONFIG_ROCKCHIP_IODOMAIN=y
-CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_ARCH_TEGRA_2x_SOC=y
 CONFIG_ARCH_TEGRA_3x_SOC=y
 CONFIG_ARCH_TEGRA_114_SOC=y
 CONFIG_ARCH_TEGRA_124_SOC=y
+CONFIG_SOC_TI=y
+CONFIG_KEYSTONE_NAVIGATOR_QMSS=y
+CONFIG_KEYSTONE_NAVIGATOR_DMA=y
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_QCOM_CPR=y
+CONFIG_QCOM_RPMHPD=y
+CONFIG_QCOM_RPMPD=y
+CONFIG_ROCKCHIP_PM_DOMAINS=y
+CONFIG_TI_SCI_PM_DOMAINS=y
 CONFIG_ARM_EXYNOS_BUS_DEVFREQ=m
 CONFIG_ARM_TEGRA_DEVFREQ=m
 CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=m
@@ -1119,6 +1151,8 @@ CONFIG_STM32_FMC2_EBI=y
 CONFIG_EXYNOS5422_DMC=m
 CONFIG_IIO=y
 CONFIG_IIO_SW_TRIGGER=y
+CONFIG_IIO_ST_ACCEL_3AXIS=m
+# CONFIG_IIO_ST_ACCEL_SPI_3AXIS is not set
 CONFIG_ASPEED_ADC=m
 CONFIG_AT91_ADC=m
 CONFIG_AT91_SAMA5D2_ADC=m
@@ -1138,6 +1172,7 @@ CONFIG_IIO_CROS_EC_SENSORS_CORE=m
 CONFIG_IIO_CROS_EC_SENSORS=m
 CONFIG_STM32_DAC=m
 CONFIG_MPU3050_I2C=y
+CONFIG_IIO_ST_GYRO_3AXIS=m
 CONFIG_CM36651=m
 CONFIG_IIO_CROS_EC_LIGHT_PROX=m
 CONFIG_SENSORS_ISL29018=y
@@ -1153,7 +1188,7 @@ CONFIG_PWM_BCM2835=y
 CONFIG_PWM_BRCMSTB=m
 CONFIG_PWM_FSL_FTM=m
 CONFIG_PWM_MESON=m
-CONFIG_PWM_RCAR=m
+CONFIG_PWM_RENESAS_RCAR=m
 CONFIG_PWM_RENESAS_TPU=y
 CONFIG_PWM_ROCKCHIP=m
 CONFIG_PWM_SAMSUNG=m
@@ -1162,9 +1197,13 @@ CONFIG_PWM_STM32=m
 CONFIG_PWM_STM32_LP=m
 CONFIG_PWM_SUN4I=y
 CONFIG_PWM_TEGRA=y
+CONFIG_PWM_TIECAP=m
 CONFIG_PWM_VT8500=y
 CONFIG_KEYSTONE_IRQ=y
 CONFIG_RESET_MCHP_SPARX5=y
+CONFIG_RESET_SCMI=y
+CONFIG_RESET_TI_SCI=m
+CONFIG_RESET_TI_SYSCON=m
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_SUN9I_USB=y
 CONFIG_PHY_BRCM_USB=m
@@ -1179,6 +1218,8 @@ CONFIG_PHY_QCOM_USB_HS=y
 CONFIG_PHY_RCAR_GEN2=m
 CONFIG_PHY_ROCKCHIP_DP=m
 CONFIG_PHY_ROCKCHIP_USB=y
+CONFIG_PHY_EXYNOS_DP_VIDEO=m
+CONFIG_PHY_EXYNOS_MIPI_VIDEO=m
 CONFIG_PHY_SAMSUNG_USB2=m
 CONFIG_PHY_EXYNOS5250_SATA=m
 CONFIG_PHY_UNIPHIER_USB2=y
@@ -1193,12 +1234,13 @@ CONFIG_TI_PIPE3=y
 CONFIG_TWL4030_USB=m
 CONFIG_RAS=y
 CONFIG_NVMEM_IMX_OCOTP=y
-CONFIG_QCOM_QFPROM=y
-CONFIG_ROCKCHIP_EFUSE=m
+CONFIG_NVMEM_MESON_MX_EFUSE=m
+CONFIG_NVMEM_QCOM_QFPROM=y
+CONFIG_NVMEM_RMEM=m
+CONFIG_NVMEM_ROCKCHIP_EFUSE=m
+CONFIG_NVMEM_STM32_ROMEM=m
 CONFIG_NVMEM_SUNXI_SID=y
 CONFIG_NVMEM_VF610_OCOTP=y
-CONFIG_MESON_MX_EFUSE=m
-CONFIG_NVMEM_RMEM=m
 CONFIG_FSI=m
 CONFIG_FSI_MASTER_GPIO=m
 CONFIG_FSI_MASTER_HUB=m
@@ -1206,13 +1248,15 @@ CONFIG_FSI_MASTER_ASPEED=m
 CONFIG_FSI_SCOM=m
 CONFIG_FSI_SBEFIFO=m
 CONFIG_FSI_OCC=m
+CONFIG_TEE=y
+CONFIG_OPTEE=y
 CONFIG_INTERCONNECT_QCOM=y
 CONFIG_INTERCONNECT_QCOM_MSM8916=y
 CONFIG_COUNTER=m
-CONFIG_STM32_TIMER_CNT=m
 CONFIG_STM32_LPTIMER_CNT=m
+CONFIG_STM32_TIMER_CNT=m
 CONFIG_EXT4_FS=y
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
@@ -1239,6 +1283,10 @@ CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
+CONFIG_CRYPTO_GHASH_ARM_CE=m
+CONFIG_CRYPTO_AES_ARM=m
+CONFIG_CRYPTO_AES_ARM_BS=m
+CONFIG_CRYPTO_AES_ARM_CE=m
 CONFIG_CRYPTO_DEV_SUN4I_SS=m
 CONFIG_CRYPTO_DEV_FSL_CAAM=m
 CONFIG_CRYPTO_DEV_EXYNOS_RNG=m
@@ -1250,10 +1298,12 @@ CONFIG_CRYPTO_DEV_MARVELL_CESA=m
 CONFIG_CRYPTO_DEV_QCE=m
 CONFIG_CRYPTO_DEV_QCOM_RNG=m
 CONFIG_CRYPTO_DEV_ROCKCHIP=m
-CONFIG_CRYPTO_DEV_STM32_CRC=m
 CONFIG_CRYPTO_DEV_STM32_HASH=m
 CONFIG_CRYPTO_DEV_STM32_CRYP=m
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_DEBUG_INFO_REDUCED=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index a53ccd49f8ff..3343f72de7ea 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -1,9 +1,8 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
@@ -11,13 +10,10 @@ CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V6 is not set
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MV78XX0=y
-CONFIG_MACH_DB78X00_BP=y
-CONFIG_MACH_RD78X00_MASA=y
 CONFIG_MACH_TERASTATION_WXL=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_FPE_NWFPE=y
-CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_VFP=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
@@ -55,7 +51,6 @@ CONFIG_CHR_DEV_SG=m
 CONFIG_ATA=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_NET_PCI=y
 CONFIG_MV643XX_ETH=y
@@ -118,12 +113,12 @@ CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SLUB_DEBUG is not set
 CONFIG_SCHEDSTATS=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig
index ef3a33ebc29a..23dbb80fcc2e 100644
--- a/arch/arm/configs/mvebu_v5_defconfig
+++ b/arch/arm/configs/mvebu_v5_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_FHANDLE=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=19
@@ -184,13 +184,11 @@ CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
 CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig
index 68a18264f31b..2d2a4dc8f379 100644
--- a/arch/arm/configs/mvebu_v7_defconfig
+++ b/arch/arm/configs/mvebu_v7_defconfig
@@ -23,7 +23,6 @@ CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_SLAB=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 155553ee06f4..3b08c63b6de4 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_TASKSTATS=y
@@ -32,13 +32,9 @@ CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_CAN=m
-CONFIG_CAN_FLEXCAN=m
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -46,7 +42,6 @@ CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_M25P80=y
 CONFIG_MTD_SST25L=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_GPMI_NAND=y
@@ -61,7 +56,7 @@ CONFIG_ENC28J60=y
 CONFIG_ICPLUS_PHY=y
 CONFIG_MICREL_PHY=y
 CONFIG_REALTEK_PHY=y
-CONFIG_SMSC_PHY=y
+CONFIG_CAN_FLEXCAN=m
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC95XX=y
 # CONFIG_WLAN is not set
@@ -69,21 +64,22 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_EDT_FT5X06=y
 CONFIG_TOUCHSCREEN_MXS_LRADC=y
 CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PWM_BEEPER=y
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_MXS_AUART=y
 # CONFIG_HW_RANDOM is not set
-# CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MXS=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_MXS=y
-CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_STMP3XXX_RTC_WATCHDOG=y
@@ -138,9 +134,6 @@ CONFIG_PWM_MXS=y
 CONFIG_NVMEM_MXS_OCOTP=y
 CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
-CONFIG_FSCACHE=m
-CONFIG_FSCACHE_STATS=y
-CONFIG_CACHEFILES=m
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
@@ -159,12 +152,10 @@ CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=y
 CONFIG_CRYPTO_DEV_MXS_DCP=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC7=m
 CONFIG_FONTS=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig
index 907403529e30..2227f86100ad 100644
--- a/arch/arm/configs/neponset_defconfig
+++ b/arch/arm/configs/neponset_defconfig
@@ -1,6 +1,8 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_ASSABET=y
 CONFIG_ASSABET_NEPONSET=y
@@ -9,7 +11,6 @@ CONFIG_ZBOOT_ROM_BSS=0xc1000000
 CONFIG_ZBOOT_ROM=y
 CONFIG_CMDLINE="console=ttySA0,38400n8 cpufreq=221200 rw root=/dev/mtdblock2 mtdparts=sa1100:512K(boot),1M(kernel),2560K(initrd),4M(root) load_ramdisk=1 prompt_ramdisk=0 mem=32M noinitrd initrd=0xc0800000,3M"
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
 CONFIG_PM=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -37,7 +38,6 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_SCSI=m
 CONFIG_BLK_DEV_SD=m
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_NET_VENDOR_SMC=y
 CONFIG_PCMCIA_PCNET=y
 CONFIG_SMC9194=y
diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig
index cf7bbcf9d98a..e639e6ad02cb 100644
--- a/arch/arm/configs/netwinder_defconfig
+++ b/arch/arm/configs/netwinder_defconfig
@@ -1,11 +1,12 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_FOOTBRIDGE=y
 CONFIG_ARCH_NETWINDER=y
 CONFIG_DEPRECATED_PARAM_STRUCT=y
 CONFIG_CMDLINE="root=0x801"
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -26,7 +27,6 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_PATA_WINBOND=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_NET_TULIP=y
 CONFIG_TULIP=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index d5881de42018..ea28ed8991b4 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -16,7 +16,6 @@ CONFIG_AEABI=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_SWAP is not set
-CONFIG_SLAB=y
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -131,9 +130,9 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=y
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_DES=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_FS=y
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 54a9f50122af..661e5d6894bd 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -1,6 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -9,7 +9,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 # CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
+CONFIG_BASE_SMALL=y
 # CONFIG_SHMEM is not set
 # CONFIG_KALLSYMS is not set
 CONFIG_PROFILING=y
@@ -20,8 +20,6 @@ CONFIG_ARCH_OMAP=y
 CONFIG_ARCH_OMAP1=y
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP730=y
-CONFIG_ARCH_OMAP850=y
 CONFIG_ARCH_OMAP16XX=y
 # CONFIG_OMAP_MUX is not set
 CONFIG_OMAP_RESET_CLOCKS=y
@@ -30,7 +28,6 @@ CONFIG_MACH_OMAP_PALMTE=y
 CONFIG_MACH_SX1=y
 CONFIG_MACH_NOKIA770=y
 CONFIG_MACH_AMS_DELTA=y
-CONFIG_MACH_OMAP_GENERIC=y
 CONFIG_AEABI=y
 CONFIG_CMDLINE="root=1f03 rootfstype=jffs2"
 CONFIG_FPE_NWFPE=y
@@ -42,7 +39,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
 # CONFIG_SWAP is not set
-CONFIG_SLOB=y
+CONFIG_SLUB_TINY=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -133,14 +130,14 @@ CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_VIRTUAL=y
 CONFIG_FB_OMAP=y
 CONFIG_FB_OMAP_LCDC_EXTERNAL=y
 CONFIG_FB_OMAP_LCDC_HWA742=y
 CONFIG_FB_OMAP_MANUAL_UPDATE=y
 CONFIG_FB_OMAP_LCD_MIPID=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_MODE_HELPERS=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
@@ -189,7 +186,7 @@ CONFIG_RTC_DRV_OMAP=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_DNOTIFY is not set
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS_FS=y
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_MSDOS_FS=y
@@ -218,20 +215,19 @@ CONFIG_NLS_KOI8_R=y
 CONFIG_NLS_UTF8=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_PCBC=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_LIBCRC32C=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_FONT_6x11=y
 CONFIG_FONT_MINI_4x6=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 99d015cf8919..1d5f75241739 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -2,7 +2,7 @@ CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
@@ -13,7 +13,6 @@ CONFIG_MEMCG=y
 CONFIG_BLK_CGROUP=y
 CONFIG_CGROUP_SCHED=y
 CONFIG_CFS_BANDWIDTH=y
-CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CPUSETS=y
 CONFIG_CGROUP_DEVICE=y
@@ -53,14 +52,6 @@ CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
 CONFIG_KERNEL_MODE_NEON=y
 CONFIG_PM_DEBUG=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM_NEON=m
-CONFIG_CRYPTO_SHA256_ARM=m
-CONFIG_CRYPTO_SHA512_ARM=m
-CONFIG_CRYPTO_AES_ARM=m
-CONFIG_CRYPTO_AES_ARM_BS=m
-CONFIG_CRYPTO_GHASH_ARM_CE=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
@@ -70,7 +61,6 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
-CONFIG_SLAB=y
 CONFIG_CMA=y
 CONFIG_ZSMALLOC=m
 CONFIG_NET=y
@@ -87,7 +77,6 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NETFILTER=y
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_LOG_NETDEV=m
 CONFIG_NF_CONNTRACK_ZONES=y
 CONFIG_NF_CONNTRACK_EVENTS=y
 CONFIG_NF_CONNTRACK_TIMEOUT=y
@@ -101,7 +90,6 @@ CONFIG_NF_TABLES_INET=y
 CONFIG_NF_TABLES_NETDEV=y
 CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
-CONFIG_NFT_COUNTER=m
 CONFIG_NFT_CONNLIMIT=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -109,7 +97,6 @@ CONFIG_NFT_MASQ=m
 CONFIG_NFT_REDIR=m
 CONFIG_NFT_NAT=m
 CONFIG_NFT_TUNNEL=m
-CONFIG_NFT_OBJREF=m
 CONFIG_NFT_QUEUE=m
 CONFIG_NFT_QUOTA=m
 CONFIG_NFT_REJECT=m
@@ -155,7 +142,6 @@ CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_CPU=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
@@ -188,7 +174,6 @@ CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
 CONFIG_NFT_DUP_IPV4=m
 CONFIG_NFT_FIB_IPV4=m
-CONFIG_NF_FLOW_TABLE_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
@@ -202,14 +187,12 @@ CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_SECURITY=m
 CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_FIB_IPV6=m
-CONFIG_NF_FLOW_TABLE_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -234,7 +217,6 @@ CONFIG_IP6_NF_TARGET_NPT=m
 CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
-CONFIG_NF_LOG_BRIDGE=m
 CONFIG_BRIDGE=m
 CONFIG_BRIDGE_VLAN_FILTERING=y
 CONFIG_VLAN_8021Q=m
@@ -249,8 +231,6 @@ CONFIG_NET_ACT_POLICE=m
 CONFIG_NET_ACT_GACT=m
 CONFIG_NET_SWITCHDEV=y
 CONFIG_CAN=m
-CONFIG_CAN_C_CAN=m
-CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_BT=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
@@ -350,6 +330,8 @@ CONFIG_AT803X_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_DP83848_PHY=y
 CONFIG_DP83867_PHY=y
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_DEFLATE=m
@@ -402,6 +384,7 @@ CONFIG_TOUCHSCREEN_TSC2007=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_CPCAP_PWRBUTTON=m
 CONFIG_INPUT_TPS65218_PWRBUTTON=m
+CONFIG_INPUT_TPS65219_PWRBUTTON=m
 CONFIG_INPUT_TWL4030_PWRBUTTON=m
 CONFIG_INPUT_UINPUT=m
 CONFIG_INPUT_PALMAS_PWRBUTTON=m
@@ -419,8 +402,6 @@ CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_8250_OMAP=y
 CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_OMAP=y
-CONFIG_SERIAL_OMAP_CONSOLE=y
 CONFIG_SERIAL_DEV_BUS=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
@@ -430,7 +411,6 @@ CONFIG_SPI_TI_QSPI=m
 CONFIG_HSI=m
 CONFIG_OMAP_SSI=m
 CONFIG_SSI_PROTOCOL=m
-CONFIG_PTP_1588_CLOCK=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
@@ -447,6 +427,7 @@ CONFIG_POWER_RESET_GPIO=y
 CONFIG_BATTERY_BQ27XXX=m
 CONFIG_CHARGER_ISP1704=m
 CONFIG_CHARGER_TWL4030=m
+CONFIG_CHARGER_TWL6030=m
 CONFIG_CHARGER_BQ2415X=m
 CONFIG_CHARGER_BQ24190=m
 CONFIG_CHARGER_BQ24735=m
@@ -473,6 +454,7 @@ CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TI_LP873X=y
 CONFIG_MFD_TI_LP87565=y
 CONFIG_MFD_TPS65218=y
+CONFIG_MFD_TPS65219=y
 CONFIG_MFD_TPS65910=y
 CONFIG_TWL6040_CORE=y
 CONFIG_REGULATOR_CPCAP=y
@@ -489,6 +471,7 @@ CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y
 CONFIG_REGULATOR_TPS65217=y
 CONFIG_REGULATOR_TPS65218=y
+CONFIG_REGULATOR_TPS65219=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_REGULATOR_TWL4030=y
 CONFIG_RC_CORE=m
@@ -496,7 +479,6 @@ CONFIG_LIRC=y
 CONFIG_RC_DEVICES=y
 CONFIG_IR_GPIO_TX=m
 CONFIG_IR_PWM_TX=m
-CONFIG_IR_RX51=m
 CONFIG_IR_SPI=m
 CONFIG_MEDIA_SUPPORT=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
@@ -572,7 +554,6 @@ CONFIG_USB_STORAGE=m
 CONFIG_USB_MUSB_HDRC=m
 CONFIG_USB_MUSB_TUSB6010=m
 CONFIG_USB_MUSB_OMAP2PLUS=m
-CONFIG_USB_MUSB_AM35X=m
 CONFIG_USB_MUSB_DSPS=m
 CONFIG_USB_INVENTRA_DMA=y
 CONFIG_USB_TI_CPPI41_DMA=y
@@ -628,6 +609,8 @@ CONFIG_LEDS_LP55XX_COMMON=m
 CONFIG_LEDS_LP5523=m
 CONFIG_LEDS_PCA963X=m
 CONFIG_LEDS_PWM=m
+CONFIG_LEDS_BD2606MVV=m
+CONFIG_LEDS_TCA6507=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_ONESHOT=m
@@ -645,6 +628,7 @@ CONFIG_RTC_DRV_PALMAS=m
 CONFIG_RTC_DRV_OMAP=m
 CONFIG_RTC_DRV_CPCAP=m
 CONFIG_DMADEVICES=y
+CONFIG_CLK_TWL=m
 CONFIG_CLK_TWL6040=m
 CONFIG_COMMON_CLK_PALMAS=m
 CONFIG_OMAP_IOMMU=y
@@ -661,14 +645,24 @@ CONFIG_TI_EMIF_SRAM=m
 CONFIG_IIO=m
 CONFIG_IIO_SW_DEVICE=m
 CONFIG_IIO_SW_TRIGGER=m
+CONFIG_BMA180=m
+CONFIG_BMC150_ACCEL=m
 CONFIG_IIO_ST_ACCEL_3AXIS=m
 CONFIG_KXCJK1013=m
 CONFIG_CPCAP_ADC=m
 CONFIG_INA2XX_ADC=m
 CONFIG_TI_AM335X_ADC=m
 CONFIG_TWL4030_MADC=m
+CONFIG_TWL6030_GPADC=m
+CONFIG_BMG160=m
+CONFIG_MPU3050_I2C=m
+CONFIG_ITG3200=m
+CONFIG_BOSCH_BNO055_I2C=m
+CONFIG_INV_MPU6050_I2C=m
 CONFIG_SENSORS_ISL29028=m
 CONFIG_AK8975=m
+CONFIG_BMC150_MAGN_I2C=m
+CONFIG_SENSORS_HMC5843_I2C=m
 CONFIG_BMP280=m
 CONFIG_PWM=y
 CONFIG_PWM_OMAP_DMTIMER=m
@@ -690,7 +684,7 @@ CONFIG_EXT4_FS_SECURITY=y
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA=y
 CONFIG_QFMT_V2=y
-CONFIG_AUTOFS4_FS=m
+CONFIG_AUTOFS_FS=m
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
@@ -711,15 +705,13 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_GHASH_ARM_CE=m
+CONFIG_CRYPTO_AES_ARM=m
+CONFIG_CRYPTO_AES_ARM_BS=m
 CONFIG_CRYPTO_DEV_OMAP=m
 CONFIG_CRYPTO_DEV_OMAP_SHAM=m
 CONFIG_CRYPTO_DEV_OMAP_AES=m
 CONFIG_CRYPTO_DEV_OMAP_DES=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=y
 CONFIG_DMA_CMA=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 1311d9583fcc..62b9c6102789 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -136,11 +136,10 @@ CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRC_T10DIF=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 # CONFIG_SLUB_DEBUG is not set
 CONFIG_LATENCYTOP=y
 # CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig
deleted file mode 100644
index 600f78b363dd..000000000000
--- a/arch/arm/configs/oxnas_v6_defconfig
+++ /dev/null
@@ -1,92 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CGROUPS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-CONFIG_STRICT_KERNEL_RWX=y
-CONFIG_STRICT_MODULE_RWX=y
-CONFIG_ARCH_MULTI_V6=y
-CONFIG_ARCH_OXNAS=y
-CONFIG_MACH_OX820=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=16
-CONFIG_FORCE_MAX_ZONEORDER=12
-CONFIG_SECCOMP=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_KEXEC=y
-CONFIG_EFI=y
-CONFIG_CPU_IDLE=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_VFP=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_CMDLINE_PARTITION=y
-CONFIG_CMA=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_OXNAS=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_NETDEVICES=y
-CONFIG_STMMAC_ETH=y
-CONFIG_REALTEK_PHY=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_CLASS_FLASH=m
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_ARM_TIMER_SP804=y
-CONFIG_EXT4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_UBIFS_FS=y
-CONFIG_PSTORE=y
-CONFIG_PSTORE_CONSOLE=y
-CONFIG_PSTORE_PMSG=y
-CONFIG_PSTORE_RAM=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=64
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig
deleted file mode 100644
index a9a808bc2f70..000000000000
--- a/arch/arm/configs/palmz72_defconfig
+++ /dev/null
@@ -1,75 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_PREEMPT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_PXA_PALM=y
-# CONFIG_MACH_PALMTX is not set
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PDA_POWER=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_PXA=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=866
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_TMPFS=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_UTF8=y
-CONFIG_CRC_T10DIF=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig
deleted file mode 100644
index 06bc9a8fef90..000000000000
--- a/arch/arm/configs/pcm027_defconfig
+++ /dev/null
@@ -1,90 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_PCM027=y
-CONFIG_MACH_PCM990_BASEBOARD=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_SWAP is not set
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_BLK_DEV is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PXA2XX_AC97=y
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=m
-CONFIG_RTC_DRV_PXA=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_DNOTIFY is not set
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="iso8859-15"
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig
deleted file mode 100644
index d87263336cb2..000000000000
--- a/arch/arm/configs/pleb_defconfig
+++ /dev/null
@@ -1,51 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_SHMEM is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_PLEB=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M"
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-# CONFIG_SWAP is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NLS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
index 70d327895ccf..4748c7d33cb8 100644
--- a/arch/arm/configs/pxa168_defconfig
+++ b/arch/arm/configs/pxa168_defconfig
@@ -1,10 +1,6 @@
 CONFIG_SYSVIPC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_MACH_ASPENITE=y
-CONFIG_MACH_ZYLONITE2=y
-CONFIG_MACH_AVENGERS_LITE=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
@@ -15,7 +11,6 @@ CONFIG_FPE_NWFPE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -26,7 +21,6 @@ CONFIG_IP_PNP=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -47,12 +41,11 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig
deleted file mode 100644
index ae0444949a87..000000000000
--- a/arch/arm/configs/pxa255-idp_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_PXA_IDP=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig
index d1e83b52e03a..381356faf382 100644
--- a/arch/arm/configs/pxa3xx_defconfig
+++ b/arch/arm/configs/pxa3xx_defconfig
@@ -1,7 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=18
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
@@ -12,7 +11,6 @@ CONFIG_AEABI=y
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
 CONFIG_FPE_NWFPE=y
 CONFIG_MODULES=y
-CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -35,7 +33,6 @@ CONFIG_MTD_NAND_MARVELL=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_KEYBOARD_ATKBD is not set
diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig
index 5072bde71508..49b59c600ae1 100644
--- a/arch/arm/configs/pxa910_defconfig
+++ b/arch/arm/configs/pxa910_defconfig
@@ -1,9 +1,8 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_ARCH_MMP=y
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M earlyprintk"
@@ -11,11 +10,8 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_MACH_TAVOREVB=y
-CONFIG_MACH_TTC_DKB=y
 CONFIG_AEABI=y
 CONFIG_FPE_NWFPE=y
-CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -26,7 +22,6 @@ CONFIG_IP_PNP=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -55,12 +50,11 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_MMP_UART2=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index 104a45722799..70489f3555d0 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -1,7 +1,7 @@
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_FHANDLE=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -10,20 +10,19 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=13
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
 CONFIG_PROFILING=y
+CONFIG_KEXEC=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_ARCH_GUMSTIX=y
 CONFIG_PXA_SHARPSL=y
 CONFIG_MACH_AKITA=y
 CONFIG_MACH_BORZOI=y
-CONFIG_PXA_SYSTEMS_CPLDS=y
 CONFIG_AEABI=y
-CONFIG_FORCE_MAX_ZONEORDER=9
+CONFIG_ARCH_FORCE_MAX_ORDER=8
 CONFIG_CMDLINE="root=/dev/ram0 ro"
-CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
@@ -34,11 +33,6 @@ CONFIG_CPUFREQ_DT=m
 CONFIG_ARM_PXA2xx_CPUFREQ=m
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM=m
-CONFIG_CRYPTO_SHA256_ARM=m
-CONFIG_CRYPTO_SHA512_ARM=m
-CONFIG_CRYPTO_AES_ARM=m
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
@@ -50,7 +44,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_LDM_PARTITION=y
 CONFIG_CMDLINE_PARTITION=y
 CONFIG_BINFMT_MISC=y
-CONFIG_SLOB=y
+CONFIG_SLUB_TINY=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -105,7 +99,6 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_CONNECTOR=y
 CONFIG_MTD=y
-CONFIG_MTD_AR7_PARTS=m
 CONFIG_MTD_CMDLINE_PARTS=m
 CONFIG_MTD_OF_PARTS=m
 CONFIG_MTD_AFS_PARTS=m
@@ -284,6 +277,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_MUX_PCA954x=m
 CONFIG_I2C_MUX_PINCTRL=m
+CONFIG_I2C_DESIGNWARE_CORE=m
 CONFIG_I2C_DESIGNWARE_PLATFORM=m
 CONFIG_I2C_GPIO=y
 CONFIG_I2C_PXA_SLAVE=y
@@ -341,7 +335,7 @@ CONFIG_MFD_MAX77693=y
 CONFIG_MFD_MAX8907=m
 CONFIG_EZX_PCAP=y
 CONFIG_UCB1400_CORE=m
-CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SEC_I2C=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65090=y
 CONFIG_MFD_TPS6586X=y
@@ -386,8 +380,6 @@ CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_PXA27x=m
 CONFIG_DRM=m
 CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
 CONFIG_FB_PXA_PARAMETERS=y
@@ -397,10 +389,10 @@ CONFIG_FB_VIRTUAL=m
 CONFIG_FB_SIMPLE=y
 CONFIG_LCD_CORGI=m
 CONFIG_LCD_PLATFORM=m
-CONFIG_LCD_TOSA=m
 CONFIG_BACKLIGHT_PWM=m
-CONFIG_BACKLIGHT_TOSA=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_TILEBLITTING=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
@@ -506,7 +498,6 @@ CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m
 CONFIG_USB_IDMOUSE=m
-CONFIG_USB_GPIO_VBUS=y
 CONFIG_USB_GPIO_VBUS=m
 CONFIG_USB_ISP1301=m
 CONFIG_USB_GADGET=m
@@ -591,12 +582,8 @@ CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
 CONFIG_XFS_FS=m
-CONFIG_AUTOFS4_FS=m
+CONFIG_AUTOFS_FS=m
 CONFIG_FUSE_FS=m
 CONFIG_CUSE=m
 CONFIG_FSCACHE=y
@@ -646,22 +633,11 @@ CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_TIMER_STATS=y
 CONFIG_SECURITY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
@@ -671,10 +647,17 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=m
+CONFIG_CRYPTO_AES_ARM=m
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -682,6 +665,7 @@ CONFIG_FONT_6x11=y
 CONFIG_FONT_MINI_4x6=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_FRAME_WARN=0
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index 8a59441701a8..fa681a7a49c2 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -1,18 +1,15 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
 CONFIG_PROFILING=y
 CONFIG_ARCH_QCOM=y
-CONFIG_ARCH_MSM8X60=y
-CONFIG_ARCH_MSM8960=y
-CONFIG_ARCH_MSM8974=y
 CONFIG_ARCH_MDM9615=y
 CONFIG_SMP=y
 CONFIG_ARM_PSCI=y
@@ -131,14 +128,19 @@ CONFIG_PINCTRL_APQ8064=y
 CONFIG_PINCTRL_APQ8084=y
 CONFIG_PINCTRL_IPQ4019=y
 CONFIG_PINCTRL_IPQ8064=y
+CONFIG_PINCTRL_MSM8226=y
 CONFIG_PINCTRL_MSM8660=y
 CONFIG_PINCTRL_MSM8960=y
+CONFIG_PINCTRL_MDM9607=y
 CONFIG_PINCTRL_MDM9615=y
 CONFIG_PINCTRL_MSM8X74=y
-CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
-CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
+CONFIG_PINCTRL_MSM8909=y
+CONFIG_PINCTRL_MSM8916=y
 CONFIG_GPIOLIB=y
 CONFIG_PINCTRL_SDX55=y
+CONFIG_PINCTRL_SDX65=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_MSM=y
@@ -182,7 +184,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_OTG=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MSM=y
 CONFIG_USB_ACM=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_CHIPIDEA=y
@@ -245,19 +246,24 @@ CONFIG_QCOM_Q6V5_PAS=y
 CONFIG_QCOM_Q6V5_PIL=y
 CONFIG_QCOM_WCNSS_PIL=y
 CONFIG_RPMSG_CHAR=y
+CONFIG_RPMSG_CTRL=y
 CONFIG_RPMSG_QCOM_GLINK_SMEM=y
 CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_QCOM_COMMAND_DB=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_OCMEM=y
 CONFIG_QCOM_PM=y
+CONFIG_QCOM_RMTFS_MEM=y
 CONFIG_QCOM_RPMH=y
-CONFIG_QCOM_RPMHPD=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
 CONFIG_QCOM_SMSM=y
+CONFIG_QCOM_SOCINFO=y
+CONFIG_QCOM_STATS=y
 CONFIG_QCOM_WCNSS_CTRL=y
+CONFIG_QCOM_RPMHPD=y
+CONFIG_QCOM_RPMPD=y
 CONFIG_EXTCON_QCOM_SPMI_MISC=y
 CONFIG_IIO=y
 CONFIG_IIO_BUFFER_CB=y
@@ -278,7 +284,7 @@ CONFIG_PHY_QCOM_QMP=y
 CONFIG_PHY_QCOM_USB_HS=y
 CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
 CONFIG_PHY_QCOM_USB_HSIC=y
-CONFIG_QCOM_QFPROM=y
+CONFIG_NVMEM_QCOM_QFPROM=y
 CONFIG_INTERCONNECT=y
 CONFIG_INTERCONNECT_QCOM=y
 CONFIG_INTERCONNECT_QCOM_MSM8974=m
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index 92f803c2805c..febea5cf7aaa 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -9,8 +9,6 @@ CONFIG_MACH_REALVIEW_EB=y
 CONFIG_REALVIEW_EB_ARM1136=y
 CONFIG_REALVIEW_EB_ARM1176=y
 CONFIG_REALVIEW_EB_A9MP=y
-CONFIG_REALVIEW_EB_ARM11MP=y
-CONFIG_MACH_REALVIEW_PB11MP=y
 CONFIG_MACH_REALVIEW_PB1176=y
 CONFIG_MACH_REALVIEW_PBA8=y
 CONFIG_MACH_REALVIEW_PBX=y
@@ -20,7 +18,6 @@ CONFIG_VFP=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_SWAP is not set
-CONFIG_SLAB=y
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -59,6 +56,8 @@ CONFIG_GPIOLIB=y
 # CONFIG_HWMON is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_AUXDISPLAY=y
+CONFIG_ARM_CHARLCD=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
@@ -86,8 +85,6 @@ CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_PL031=y
-CONFIG_AUXDISPLAY=y
-CONFIG_ARM_CHARLCD=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index 16d74a1f027a..24f1fa868230 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -2,15 +2,15 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_RPC=y
 CONFIG_CPU_SA110=y
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
-CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -45,7 +45,6 @@ CONFIG_ATA=y
 CONFIG_PATA_ICSIDE=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_ARM_ETHER1=y
 CONFIG_ARM_ETHER3=y
 CONFIG_ARM_ETHERH=y
@@ -79,7 +78,7 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PCF8583=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-CONFIG_AUTOFS4_FS=m
+CONFIG_AUTOFS_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_MSDOS_FS=m
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
deleted file mode 100644
index 41b40863a78e..000000000000
--- a/arch/arm/configs/s3c2410_defconfig
+++ /dev/null
@@ -1,437 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=m
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_ARCH_MULTI_V4T=y
-CONFIG_ARCH_MULTI_V5=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_S3C24XX=y
-CONFIG_S3C_ADC=y
-CONFIG_CPU_S3C2412=y
-CONFIG_CPU_S3C2416=y
-CONFIG_CPU_S3C2440=y
-CONFIG_CPU_S3C2442=y
-CONFIG_CPU_S3C2443=y
-CONFIG_MACH_AML_M5900=y
-CONFIG_ARCH_BAST=y
-CONFIG_ARCH_H1940=y
-CONFIG_MACH_N30=y
-CONFIG_MACH_OTOM=y
-CONFIG_MACH_QT2410=y
-CONFIG_ARCH_SMDK2410=y
-CONFIG_MACH_TCT_HAMMER=y
-CONFIG_MACH_VR1000=y
-CONFIG_MACH_JIVE=y
-CONFIG_MACH_SMDK2412=y
-CONFIG_MACH_VSTMS=y
-CONFIG_MACH_SMDK2416=y
-CONFIG_MACH_ANUBIS=y
-CONFIG_MACH_AT2440EVB=y
-CONFIG_MACH_MINI2440=y
-CONFIG_MACH_NEXCODER_2440=y
-CONFIG_MACH_OSIRIS=y
-CONFIG_MACH_OSIRIS_DVS=m
-CONFIG_MACH_RX3715=y
-CONFIG_ARCH_S3C2440=y
-CONFIG_MACH_NEO1973_GTA02=y
-CONFIG_MACH_RX1950=y
-CONFIG_MACH_SMDK2443=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_APM_EMULATION=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=m
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_HSTCP=m
-CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_SCALABLE=m
-CONFIG_TCP_CONG_LP=m
-CONFIG_TCP_CONG_VENO=m
-CONFIG_TCP_CONG_YEAH=m
-CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_LOG=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_MESH=y
-CONFIG_MAC80211_LEDS=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_S3C2410=y
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_AX88796=m
-CONFIG_PARPORT_1284=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_ATA_OVER_ETH=m
-CONFIG_EEPROM_AT24=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_DM9000=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_BCM5974=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_TWIDJOY=m
-CONFIG_JOYSTICK_ZHENHUA=m
-CONFIG_JOYSTICK_DB9=m
-CONFIG_JOYSTICK_GAMECON=m
-CONFIG_JOYSTICK_TURBOGRAFX=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_JOYSTICK_XPAD=m
-CONFIG_JOYSTICK_XPAD_FF=y
-CONFIG_JOYSTICK_XPAD_LEDS=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_ATI_REMOTE2=m
-CONFIG_INPUT_KEYSPAN_REMOTE=m
-CONFIG_INPUT_POWERMATE=m
-CONFIG_INPUT_YEALINK=m
-CONFIG_INPUT_CM109=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_DEV_BUS=m
-CONFIG_PRINTER=y
-CONFIG_PPDEV=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_S3C2410=y
-CONFIG_I2C_SIMTEC=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=m
-CONFIG_SPI_S3C24XX=m
-CONFIG_SPI_SPIDEV=m
-CONFIG_SPI_TLE62X0=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM85=m
-CONFIG_WATCHDOG=y
-CONFIG_S3C2410_WATCHDOG=y
-CONFIG_MFD_SM501=y
-CONFIG_TPS65010=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_S3C2410=y
-CONFIG_FB_SM501=y
-CONFIG_BACKLIGHT_PWM=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_SOC=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_STORAGE_ALAUDA=m
-CONFIG_USB_STORAGE_ONETOUCH=m
-CONFIG_USB_STORAGE_KARMA=m
-CONFIG_USB_STORAGE_CYPRESS_ATACB=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_USS720=m
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_PL2303=y
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_ADUTUX=m
-CONFIG_USB_SEVSEG=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_FTDI_ELAN=m
-CONFIG_USB_APPLEDISPLAY=m
-CONFIG_USB_LD=m
-CONFIG_USB_TRANCEVIBRATOR=m
-CONFIG_USB_IOWARRIOR=m
-CONFIG_USB_TEST=m
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_TEST=m
-CONFIG_MMC_SDHCI=m
-CONFIG_MMC_SPI=m
-CONFIG_MMC_S3C=y
-CONFIG_LEDS_S3C24XX=m
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_PCA955X=m
-CONFIG_LEDS_DAC124S085=m
-CONFIG_LEDS_PWM=m
-CONFIG_LEDS_BD2802=m
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_S3C=y
-CONFIG_DMADEVICES=y
-CONFIG_S3C24XX_DMAC=y
-CONFIG_PWM=y
-CONFIG_PWM_SAMSUNG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=y
-CONFIG_SQUASHFS=m
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_CIFS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 4f04f583c738..967b1cb22136 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -1,5 +1,3 @@
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_ARCH_MULTI_V6=y
@@ -13,7 +11,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_S3C2410=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_EEPROM_AT24=y
@@ -62,8 +59,8 @@ CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_CRAMFS=y
 CONFIG_ROMFS_FS=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK=y
diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
index 789e900a8a08..02121eec3658 100644
--- a/arch/arm/configs/s5pv210_defconfig
+++ b/arch/arm/configs/s5pv210_defconfig
@@ -1,10 +1,8 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_CGROUPS=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_ARCH_S5PV210=y
@@ -97,13 +95,14 @@ CONFIG_MMC_SDHCI_S3C_DMA=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MAX8998=m
 CONFIG_DMADEVICES=y
+CONFIG_IIO=y
 CONFIG_PWM=y
 CONFIG_PWM_SAMSUNG=y
 CONFIG_PHY_SAMSUNG_USB2=m
 CONFIG_PHY_S5PV210_USB2=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT4_FS=y
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
@@ -114,9 +113,8 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
-CONFIG_CRC_CCITT=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_RT_MUTEXES=y
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index 3a6a4851ef26..2cad045e1d8d 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -5,7 +5,8 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_SAMA5D2=y
 CONFIG_SOC_SAMA5D3=y
@@ -14,7 +15,6 @@ CONFIG_SOC_SAMA5D4=y
 CONFIG_UACCESS_WITH_MEMCPY=y
 # CONFIG_ATAGS is not set
 CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
-CONFIG_KEXEC=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
@@ -26,7 +26,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_SWAP is not set
-CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -43,9 +42,6 @@ CONFIG_BRIDGE_VLAN_FILTERING=y
 CONFIG_NET_DSA=m
 CONFIG_VLAN_8021Q=m
 CONFIG_CAN=y
-CONFIG_CAN_AT91=y
-CONFIG_CAN_M_CAN=y
-CONFIG_CAN_M_CAN_PLATFORM=y
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_MAC80211_LEDS=y
@@ -90,12 +86,16 @@ CONFIG_MACB=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_MICREL_PHY=y
+CONFIG_CAN_AT91=y
+CONFIG_CAN_M_CAN=y
+CONFIG_CAN_M_CAN_PLATFORM=y
 CONFIG_USB_LAN78XX=m
 CONFIG_LIBERTAS_THINFIRM=m
 CONFIG_LIBERTAS_THINFIRM_USB=m
 CONFIG_MWIFIEX=m
 CONFIG_MWIFIEX_SDIO=m
 CONFIG_MWIFIEX_USB=m
+CONFIG_WILC1000_SDIO=m
 CONFIG_RT2X00=m
 CONFIG_RT2500USB=m
 CONFIG_RT73USB=m
@@ -150,8 +150,8 @@ CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VIDEO_ATMEL_ISC=y
 CONFIG_VIDEO_ATMEL_ISI=y
+CONFIG_VIDEO_MICROCHIP_ISC=y
 CONFIG_VIDEO_MT9V032=m
 CONFIG_VIDEO_OV2640=m
 CONFIG_VIDEO_OV5640=m
@@ -213,6 +213,7 @@ CONFIG_VIDEO_HANTRO=m
 CONFIG_IIO=y
 CONFIG_AT91_ADC=y
 CONFIG_AT91_SAMA5D2_ADC=y
+CONFIG_PAC1934=m
 CONFIG_ENVELOPE_DETECTOR=m
 CONFIG_DPOT_DAC=m
 CONFIG_MCP4531=m
@@ -233,6 +234,7 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_CFB=y
 CONFIG_CRYPTO_OFB=y
@@ -240,7 +242,6 @@ CONFIG_CRYPTO_XTS=y
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_DEV_ATMEL_AES=y
diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig
index 0384030d8b25..e14720a9a5ac 100644
--- a/arch/arm/configs/sama7_defconfig
+++ b/arch/arm/configs/sama7_defconfig
@@ -6,20 +6,19 @@ CONFIG_LOG_BUF_SHIFT=16
 CONFIG_CGROUPS=y
 CONFIG_CGROUP_DEBUG=y
 CONFIG_NAMESPACES=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
 # CONFIG_FHANDLE is not set
 # CONFIG_IO_URING is not set
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
 CONFIG_ARCH_AT91=y
+CONFIG_SOC_SAMA7D65=y
 CONFIG_SOC_SAMA7G5=y
 CONFIG_ATMEL_CLOCKSOURCE_TCB=y
 # CONFIG_CACHE_L2X0 is not set
 # CONFIG_ARM_PATCH_IDIV is not set
 # CONFIG_CPU_SW_DOMAIN_PAN is not set
-CONFIG_FORCE_MAX_ZONEORDER=15
+CONFIG_ARCH_FORCE_MAX_ORDER=14
 CONFIG_UACCESS_WITH_MEMCPY=y
 # CONFIG_ATAGS is not set
 CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk ignore_loglevel"
@@ -41,7 +40,6 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_COREDUMP is not set
 # CONFIG_SWAP is not set
-CONFIG_SLAB=y
 # CONFIG_COMPACTION is not set
 CONFIG_CMA=y
 # CONFIG_VM_EVENT_COUNTERS is not set
@@ -59,8 +57,6 @@ CONFIG_BRIDGE_VLAN_FILTERING=y
 CONFIG_NET_DSA=m
 CONFIG_VLAN_8021Q=m
 CONFIG_CAN=y
-CONFIG_CAN_M_CAN=y
-CONFIG_CAN_M_CAN_PLATFORM=y
 CONFIG_BT=y
 CONFIG_BT_RFCOMM=y
 CONFIG_BT_RFCOMM_TTY=y
@@ -107,6 +103,8 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 CONFIG_MACB=y
 CONFIG_MICREL_PHY=y
+CONFIG_CAN_M_CAN=y
+CONFIG_CAN_M_CAN_PLATFORM=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
@@ -128,6 +126,10 @@ CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_AT91_RESET=y
 CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
 # CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_STATISTICS=y
+CONFIG_CPU_THERMAL=y
+CONFIG_GENERIC_ADC_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_SAMA5D4_WATCHDOG=y
 CONFIG_MFD_ATMEL_FLEXCOM=y
@@ -140,7 +142,7 @@ CONFIG_MEDIA_SUPPORT_FILTER=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VIDEO_ATMEL_XISC=y
+CONFIG_VIDEO_MICROCHIP_XISC=y
 CONFIG_VIDEO_MICROCHIP_CSI2DC=y
 CONFIG_VIDEO_IMX219=m
 CONFIG_VIDEO_IMX274=m
@@ -188,15 +190,16 @@ CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_DMADEVICES=y
 CONFIG_AT_XDMAC=y
 CONFIG_STAGING=y
-CONFIG_MICROCHIP_PIT64B=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_IIO_SW_TRIGGER=y
 CONFIG_AT91_SAMA5D2_ADC=y
+CONFIG_PAC1934=m
 CONFIG_PWM=y
 CONFIG_PWM_ATMEL=y
 CONFIG_MCHP_EIC=y
 CONFIG_RESET_CONTROLLER=y
+CONFIG_NVMEM_MICROCHIP_OTPC=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_FANOTIFY=y
@@ -212,20 +215,18 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_LSM="N"
 CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_CFB=y
 CONFIG_CRYPTO_OFB=y
 CONFIG_CRYPTO_XTS=y
+CONFIG_CRYPTO_GCM=y
 CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_DEV_ATMEL_AES=y
 CONFIG_CRYPTO_DEV_ATMEL_TDES=y
 CONFIG_CRYPTO_DEV_ATMEL_SHA=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=32
 CONFIG_CMA_ALIGNMENT=9
diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig
deleted file mode 100644
index 42252e85ee49..000000000000
--- a/arch/arm/configs/shannon_defconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_SHANNON=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttySA0,9600 console=tty1 root=/dev/mtdblock2 init=/linuxrc"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=y
-CONFIG_PCMCIA_SMC91C92=y
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_WATCHDOG=y
-CONFIG_SA1100_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_SA1100=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index a29bebb3742e..e4cb33b2bcee 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -1,11 +1,12 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_PERF_EVENTS=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_RENESAS=y
 CONFIG_PL310_ERRATA_588369=y
 CONFIG_SMP=y
@@ -13,7 +14,7 @@ CONFIG_SCHED_MC=y
 CONFIG_NR_CPUS=8
 CONFIG_HIGHMEM=y
 CONFIG_ARM_APPENDED_DTB=y
-CONFIG_KEXEC=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
@@ -24,7 +25,7 @@ CONFIG_CPUFREQ_DT=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_SLAB=y
+CONFIG_SLAB_FREELIST_HARDENED=y
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -32,12 +33,12 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
+CONFIG_NET_DSA=y
 CONFIG_CAN=y
-CONFIG_CAN_RCAR=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
-CONFIG_PCI_RCAR_GEN2=y
 CONFIG_PCIE_RCAR_HOST=y
+CONFIG_PCI_RCAR_GEN2=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
@@ -52,13 +53,18 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_SATA_RCAR=y
 CONFIG_NETDEVICES=y
+CONFIG_NET_DSA_RZN1_A5PSW=y
 CONFIG_SH_ETH=y
 CONFIG_RAVB=y
 CONFIG_SMSC911X=y
+CONFIG_STMMAC_ETH=y
+# CONFIG_DWMAC_RENESAS_GBETH is not set
 CONFIG_MICREL_PHY=y
 CONFIG_SMSC_PHY=y
+CONFIG_CAN_RCAR=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_EDT_FT5X06=y
@@ -73,12 +79,14 @@ CONFIG_SERIAL_8250=y
 # CONFIG_SERIAL_8250_16550A_VARIANTS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_EXAR is not set
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_8250_EM=y
 # CONFIG_SERIAL_8250_PERICOM is not set
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DEMUX_PINCTRL=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_EMEV2=y
 CONFIG_I2C_GPIO=y
 CONFIG_I2C_RIIC=y
@@ -91,6 +99,7 @@ CONFIG_SPI_SH_MSIOF=y
 CONFIG_SPI_SH_HSPI=y
 CONFIG_PINCTRL_RZA1=y
 CONFIG_PINCTRL_RZA2=y
+CONFIG_PINCTRL_RZN1=y
 CONFIG_GPIO_EM=y
 CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_PCA953X=y
@@ -98,7 +107,7 @@ CONFIG_GPIO_PCF857X=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_RMOBILE=y
 CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
+CONFIG_SENSORS_LM75=y
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_RCAR_THERMAL=y
@@ -131,17 +140,19 @@ CONFIG_VIDEO_ADV7604=y
 CONFIG_VIDEO_ADV7604_CEC=y
 CONFIG_VIDEO_ML86V7667=y
 CONFIG_DRM=y
+CONFIG_DRM_FBDEV_EMULATION=y
 CONFIG_DRM_RCAR_DU=y
-CONFIG_DRM_PANEL_SIMPLE=y
+# CONFIG_DRM_RCAR_USE_MIPI_DSI is not set
+CONFIG_DRM_SHMOBILE=y
 CONFIG_DRM_PANEL_EDP=y
+CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_DISPLAY_CONNECTOR=y
 CONFIG_DRM_LVDS_CODEC=y
 CONFIG_DRM_SII902X=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_I2C_ADV7511=y
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FB_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_AS3711=y
 CONFIG_SOUND=y
@@ -163,8 +174,12 @@ CONFIG_USB_R8A66597_HCD=y
 CONFIG_USB_RENESAS_USBHS=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=y
+CONFIG_USB_RENESAS_USBF=y
 CONFIG_USB_ETH=y
 CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ARASAN=y
 CONFIG_MMC_SDHI=y
 CONFIG_MMC_SH_MMCIF=y
 CONFIG_NEW_LEDS=y
@@ -180,34 +195,16 @@ CONFIG_RTC_DRV_DA9063=y
 CONFIG_RTC_DRV_SH=y
 CONFIG_RTC_DRV_RZN1=y
 CONFIG_DMADEVICES=y
+CONFIG_DW_DMAC=y
+CONFIG_RZN1_DMAMUX=y
 CONFIG_RCAR_DMAC=y
 CONFIG_RENESAS_USB_DMAC=y
-CONFIG_STAGING=y
-CONFIG_STAGING_BOARD=y
+CONFIG_RZ_DMAC=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_ARCH_EMEV2=y
-CONFIG_ARCH_R8A7794=y
-CONFIG_ARCH_R8A7779=y
-CONFIG_ARCH_R8A7790=y
-CONFIG_ARCH_R8A7778=y
-CONFIG_ARCH_R8A7793=y
-CONFIG_ARCH_R8A7791=y
-CONFIG_ARCH_R8A7792=y
-CONFIG_ARCH_R8A7740=y
-CONFIG_ARCH_R8A73A4=y
-CONFIG_ARCH_R7S72100=y
-CONFIG_ARCH_R7S9210=y
-CONFIG_ARCH_R8A77470=y
-CONFIG_ARCH_R8A7745=y
-CONFIG_ARCH_R8A7742=y
-CONFIG_ARCH_R8A7743=y
-CONFIG_ARCH_R8A7744=y
-CONFIG_ARCH_R9A06G032=y
-CONFIG_ARCH_SH73A0=y
 CONFIG_IIO=y
 CONFIG_AK8975=y
 CONFIG_PWM=y
-CONFIG_PWM_RCAR=y
+CONFIG_PWM_RENESAS_RCAR=y
 CONFIG_PWM_RENESAS_TPU=y
 CONFIG_PHY_RCAR_GEN2=y
 CONFIG_PHY_RCAR_GEN3_USB2=y
@@ -228,3 +225,4 @@ CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_FS=y
+CONFIG_ARM_DEBUG_WX=y
diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig
deleted file mode 100644
index cc451728f6d9..000000000000
--- a/arch/arm/configs/simpad_defconfig
+++ /dev/null
@@ -1,98 +0,0 @@
-CONFIG_LOCALVERSION="oe1"
-CONFIG_SYSVIPC=y
-CONFIG_PREEMPT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_SIMPAD=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO=m
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_PROC_INFO=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
index d91ae3f0d698..294906c8f16e 100644
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@@ -7,7 +7,7 @@ CONFIG_CGROUPS=y
 CONFIG_CPUSETS=y
 CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PROFILING=y
 CONFIG_ARCH_INTEL_SOCFPGA=y
 CONFIG_ARM_THUMBEE=y
@@ -33,9 +33,6 @@ CONFIG_NETWORK_PHY_TIMESTAMPING=y
 CONFIG_VLAN_8021Q=y
 CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_CAN=y
-CONFIG_CAN_C_CAN=y
-CONFIG_CAN_C_CAN_PLATFORM=y
-CONFIG_CAN_DEBUG_DEVICES=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
 CONFIG_PCIE_ALTERA=y
@@ -70,6 +67,9 @@ CONFIG_IXGBE=m
 CONFIG_STMMAC_ETH=y
 CONFIG_MARVELL_PHY=y
 CONFIG_MICREL_PHY=y
+CONFIG_CAN_C_CAN=y
+CONFIG_CAN_C_CAN_PLATFORM=y
+CONFIG_CAN_DEBUG_DEVICES=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_STMPE=y
@@ -83,6 +83,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_8250_DW=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
 CONFIG_SPI_CADENCE_QUADSPI=y
@@ -136,7 +137,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT3_FS=y
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_NTFS_RW=y
diff --git a/arch/arm/configs/sp7021_defconfig b/arch/arm/configs/sp7021_defconfig
index 703b9aaa40f0..ec723401b440 100644
--- a/arch/arm/configs/sp7021_defconfig
+++ b/arch/arm/configs/sp7021_defconfig
@@ -13,12 +13,11 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_RD_LZ4 is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
 CONFIG_ARCH_SUNPLUS=y
 # CONFIG_VDSO is not set
 CONFIG_SMP=y
 CONFIG_THUMB2_KERNEL=y
-CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=11
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_MODULES=y
diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig
index 0227dd566c28..a8f992fdb30d 100644
--- a/arch/arm/configs/spear13xx_defconfig
+++ b/arch/arm/configs/spear13xx_defconfig
@@ -62,6 +62,7 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
@@ -85,7 +86,7 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=m
+CONFIG_AUTOFS_FS=m
 CONFIG_FUSE_FS=y
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
@@ -98,7 +99,7 @@ CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig
index 254d970a4011..8dc5a388759c 100644
--- a/arch/arm/configs/spear3xx_defconfig
+++ b/arch/arm/configs/spear3xx_defconfig
@@ -42,6 +42,7 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
@@ -68,7 +69,7 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=m
+CONFIG_AUTOFS_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
@@ -78,7 +79,7 @@ CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig
index 2809c4eb77e7..4e9e1a6ff381 100644
--- a/arch/arm/configs/spear6xx_defconfig
+++ b/arch/arm/configs/spear6xx_defconfig
@@ -11,7 +11,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
 CONFIG_NET=y
 CONFIG_MTD=y
-CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_FSMC=y
@@ -28,23 +27,22 @@ CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_SMSC is not set
 CONFIG_STMMAC_ETH=y
 # CONFIG_WLAN is not set
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_RAW_DRIVER=y
 CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
-CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_DRM=y
+CONFIG_DRM_PL111=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
@@ -57,7 +55,7 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=m
+CONFIG_AUTOFS_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
@@ -67,7 +65,7 @@ CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 1284a1d92ca3..ac2a0f998c73 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -2,7 +2,6 @@ CONFIG_SYSVIPC=y
 CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_PROFILING=y
@@ -13,7 +12,6 @@ CONFIG_MACH_AKITA=y
 CONFIG_MACH_BORZOI=y
 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
@@ -88,7 +86,6 @@ CONFIG_CHR_DEV_SG=m
 CONFIG_ATA=y
 CONFIG_PATA_PCMCIA=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_PCMCIA_PCNET=m
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
@@ -218,14 +215,9 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=m
@@ -237,8 +229,11 @@ CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
index 1f5446cda8b6..dcd9c316072e 100644
--- a/arch/arm/configs/stm32_defconfig
+++ b/arch/arm/configs/stm32_defconfig
@@ -4,25 +4,27 @@ CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
-# CONFIG_BASE_FULL is not set
+# CONFIG_POSIX_TIMERS is not set
+CONFIG_BASE_SMALL=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-CONFIG_EMBEDDED=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IO_URING is not set
+# CONFIG_ADVISE_SYSCALLS is not set
 # CONFIG_MMU is not set
 CONFIG_ARCH_STM32=y
 CONFIG_CPU_V7M_NUM_IRQ=240
 CONFIG_SET_MEM_PARAM=y
 CONFIG_DRAM_BASE=0x90000000
-CONFIG_FLASH_MEM_BASE=0x08000000
-CONFIG_FLASH_SIZE=0x00200000
 # CONFIG_ATAGS is not set
 CONFIG_XIP_KERNEL=y
 CONFIG_XIP_PHYS_ADDR=0x08008000
+# CONFIG_SUSPEND is not set
+# CONFIG_GCC_PLUGINS is not set
 CONFIG_BINFMT_FLAT=y
 # CONFIG_COREDUMP is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
@@ -63,6 +65,7 @@ CONFIG_DMADEVICES=y
 CONFIG_STM32_DMA=y
 CONFIG_STM32_DMAMUX=y
 CONFIG_STM32_MDMA=y
+# CONFIG_COMMON_CLK_STM32MP is not set
 CONFIG_IIO=y
 CONFIG_STM32_ADC_CORE=y
 CONFIG_STM32_ADC=y
@@ -71,13 +74,8 @@ CONFIG_EXT3_FS=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
 CONFIG_NLS=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SLUB_DEBUG is not set
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_CRYPTO=y
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index 3d14827e0a31..a83d29fed175 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -1,4 +1,4 @@
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
@@ -26,7 +26,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_CAN=y
-CONFIG_CAN_SUN4I=y
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -52,6 +51,7 @@ CONFIG_STMMAC_ETH=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_MICREL_PHY=y
 CONFIG_REALTEK_PHY=y
+CONFIG_CAN_SUN4I=y
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_SUN4I_LRADC=y
@@ -110,6 +110,7 @@ CONFIG_DRM_PANEL_LVDS=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
+CONFIG_DRM_DW_HDMI=y
 CONFIG_DRM_LIMA=y
 CONFIG_FB_SIMPLE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
deleted file mode 100644
index 3b29ae1fb750..000000000000
--- a/arch/arm/configs/tct_hammer_defconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_SHMEM is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_KALLSYMS is not set
-CONFIG_ARCH_MULTI_V4T=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_S3C24XX=y
-CONFIG_MACH_TCT_HAMMER=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_SWAP is not set
-CONFIG_SLOB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=10240
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT_CONSOLE is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_S3C2410=y
-CONFIG_USB_ETH=m
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-# CONFIG_PROC_SYSCTL is not set
-CONFIG_JFFS2_FS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_CRC_CCITT=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 71400af6cef4..ba863b445417 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -1,25 +1,24 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
 CONFIG_CGROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_CGROUP_DEBUG=y
 CONFIG_NAMESPACES=y
 CONFIG_USER_NS=y
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
 # CONFIG_ELF_CORE is not set
-CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_SMP=y
 CONFIG_HIGHMEM=y
-CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
@@ -32,7 +31,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_SLAB=y
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -54,7 +52,6 @@ CONFIG_IPV6_MIP6=y
 CONFIG_IPV6_TUNNEL=y
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_CAN=y
-CONFIG_CAN_MCP251X=y
 CONFIG_BT=y
 CONFIG_BT_RFCOMM=y
 CONFIG_BT_BNEP=y
@@ -99,6 +96,7 @@ CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 CONFIG_IGB=y
 CONFIG_R8169=y
+CONFIG_CAN_MCP251X=y
 CONFIG_USB_PEGASUS=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
@@ -227,7 +225,12 @@ CONFIG_SND_HDA_TEGRA=y
 CONFIG_SND_HDA_INPUT_BEEP=y
 CONFIG_SND_HDA_PATCH_LOADER=y
 CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_REALTEK_LIB=y
+CONFIG_SND_HDA_CODEC_ALC269=y
 CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_HDMI_GENERIC=y
+CONFIG_SND_HDA_CODEC_HDMI_NVIDIA=y
+CONFIG_SND_HDA_CODEC_HDMI_TEGRA=y
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
@@ -293,7 +296,6 @@ CONFIG_CHROME_PLATFORMS=y
 CONFIG_CROS_EC=y
 CONFIG_CROS_EC_I2C=m
 CONFIG_CROS_EC_SPI=m
-CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_ARCH_TEGRA_2x_SOC=y
 CONFIG_ARCH_TEGRA_3x_SOC=y
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
deleted file mode 100644
index 009abe1e49ef..000000000000
--- a/arch/arm/configs/trizeps4_defconfig
+++ /dev/null
@@ -1,207 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_PREEMPT=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_TRIZEPS_PXA=y
-CONFIG_MACH_TRIZEPS4=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=fe01 console=ttyS0,38400n8 loglevel=5"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_PM=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_LDM_PARTITION=y
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_VLAN_8021Q=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_CFG80211=y
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_LOAD_CIS is not set
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_DOC2000=y
-CONFIG_MTD_DOC2001=y
-CONFIG_MTD_DOC2001PLUS=y
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x4000000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_DISKONCHIP=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_ATA=m
-CONFIG_PATA_PCMCIA=m
-CONFIG_PATA_PLATFORM=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_PHYLIB=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MPPE=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_HOSTAP=y
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_CS=y
-CONFIG_HERMES=y
-CONFIG_PCMCIA_HERMES=y
-CONFIG_PCMCIA_SPECTRUM=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_SERIAL=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-CONFIG_I2C_PXA_SLAVE=y
-CONFIG_WATCHDOG=y
-CONFIG_SA1100_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_PXA=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_PXA2XX_AC97=y
-CONFIG_SND_USB_AUDIO=m
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_PCF8583=m
-CONFIG_RTC_DRV_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V4=y
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_NLS_DEFAULT="iso8859-15"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 3bdc217667a6..9c8dc6dd5fe3 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -38,6 +38,10 @@ CONFIG_CFG80211_DEBUGFS=y
 CONFIG_MAC80211=y
 CONFIG_MAC80211_LEDS=y
 CONFIG_CAIF=y
+CONFIG_NFC=m
+CONFIG_NFC_HCI=m
+CONFIG_NFC_SHDLC=y
+CONFIG_NFC_PN544_I2C=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_GNSS=y
@@ -180,10 +184,8 @@ CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_CRYPTO_DEV_UX500=y
-CONFIG_CRYPTO_DEV_UX500_CRYP=y
-CONFIG_CRYPTO_DEV_UX500_HASH=y
-CONFIG_CRYPTO_DEV_UX500_DEBUG=y
+CONFIG_CRYPTO_DEV_STM32_HASH=y
+CONFIG_CRYPTO_DEV_STM32_CRYP=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index 67e3f9138306..849118cbbb44 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -14,7 +14,6 @@ CONFIG_VFP=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_SLAB=y
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig
index 4e3a0133e4d3..cdb6065e04fd 100644
--- a/arch/arm/configs/vexpress_defconfig
+++ b/arch/arm/configs/vexpress_defconfig
@@ -1,5 +1,7 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_FULL=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -12,7 +14,6 @@ CONFIG_CPUSETS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PROFILING=y
 CONFIG_ARCH_VEXPRESS=y
-CONFIG_ARCH_VEXPRESS_DCSCB=y
 CONFIG_ARCH_VEXPRESS_TC2_PM=y
 CONFIG_SMP=y
 CONFIG_HAVE_ARM_ARCH_TIMER=y
@@ -42,6 +43,7 @@ CONFIG_NET_9P_VIRTIO=y
 CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
@@ -133,9 +135,8 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_CRYPTO_HW is not set
 CONFIG_DMA_CMA=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/vf610m4_defconfig b/arch/arm/configs/vf610m4_defconfig
index 2e47cc57a928..a5609cbfdfb3 100644
--- a/arch/arm/configs/vf610m4_defconfig
+++ b/arch/arm/configs/vf610m4_defconfig
@@ -4,8 +4,8 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_LZMA is not set
 # CONFIG_RD_XZ is not set
 # CONFIG_RD_LZ4 is not set
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
 # CONFIG_MMU is not set
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_VF610=y
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
deleted file mode 100644
index 02f9849893b2..000000000000
--- a/arch/arm/configs/viper_defconfig
+++ /dev/null
@@ -1,160 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=13
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EXPERT=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_SHMEM is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_VIPER=y
-CONFIG_IWMMXT=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_FPE_FASTFPE=y
-CONFIG_PM=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_SWAP is not set
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ATA=m
-# CONFIG_SATA_PMP is not set
-CONFIG_PATA_PCMCIA=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_NET_PCMCIA=y
-CONFIG_INPUT_MOUSEDEV=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_FUJITSU=m
-CONFIG_TOUCHSCREEN_ELO=m
-CONFIG_TOUCHSCREEN_MTOUCH=m
-CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_HTCPEN=m
-CONFIG_TOUCHSCREEN_PENMOUNT=m
-CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
-CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_TOUCHIT213=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-# CONFIG_VT_CONSOLE is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=5
-CONFIG_SERIAL_8250_RUNTIME_UARTS=5
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_PXA=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_PXA=m
-CONFIG_FB_PXA_PARAMETERS=y
-CONFIG_BACKLIGHT_PWM=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PXA2XX_AC97=m
-CONFIG_USB=m
-CONFIG_USB_ISP116X_HCD=m
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_R8A66597_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_G_PRINTER=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_SA1100=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_VFAT_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRC_T10DIF=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_ARC4=m
diff --git a/arch/arm/configs/vt8500_v6_v7_defconfig b/arch/arm/configs/vt8500_v6_v7_defconfig
index cb8d38e9562a..41607a84abc8 100644
--- a/arch/arm/configs/vt8500_v6_v7_defconfig
+++ b/arch/arm/configs/vt8500_v6_v7_defconfig
@@ -1,4 +1,4 @@
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_ARCH_MULTI_V6=y
diff --git a/arch/arm/configs/wpcm450_defconfig b/arch/arm/configs/wpcm450_defconfig
new file mode 100644
index 000000000000..cd4b3e70ff68
--- /dev/null
+++ b/arch/arm/configs/wpcm450_defconfig
@@ -0,0 +1,208 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_PROFILING=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_NPCM=y
+CONFIG_ARCH_WPCM450=y
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+CONFIG_AEABI=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+# CONFIG_ATAGS is not set
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_CPU_IDLE=y
+CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
+CONFIG_STRICT_KERNEL_RWX=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_TAG_DSA=y
+CONFIG_NET_DSA_TAG_EDSA=y
+CONFIG_NET_DSA_TAG_TRAILER=y
+CONFIG_NET_PKTGEN=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SRAM=y
+CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ALACRITECH is not set
+# CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CADENCE is not set
+# CONFIG_NET_VENDOR_CAVIUM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_CORTINA is not set
+# CONFIG_NET_VENDOR_EZCHIP is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_GOOGLE is not set
+# CONFIG_NET_VENDOR_HISILICON is not set
+# CONFIG_NET_VENDOR_HUAWEI is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_MICROSEMI is not set
+# CONFIG_NET_VENDOR_NI is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
+# CONFIG_NET_VENDOR_PENSANDO is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_RENESAS is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SOLARFLARE is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_SOCIONEXT is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_NET_VENDOR_XILINX is not set
+CONFIG_REALTEK_PHY=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_LEGACY_TIOCSTI is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_NPCM7XX_KCS_IPMI_BMC=y
+CONFIG_IPMI_KCS_BMC_CDEV_IPMI=y
+CONFIG_IPMI_KCS_BMC_SERIO=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_NPCM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_NPCM=y
+CONFIG_SPI=y
+CONFIG_SPI_WPCM_FIU=y
+CONFIG_SPI_NPCM_PSPI=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_WPCM450=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_SENSORS_NPCM7XX=y
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_NPCM7XX_WATCHDOG=y
+CONFIG_MFD_SYSCON=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_HID is not set
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_CONFIGFS=y
+CONFIG_USB_CONFIGFS_SERIAL=y
+CONFIG_USB_CONFIGFS_ACM=y
+CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_CONFIGFS_F_HID=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_DMADEVICES=y
+CONFIG_SYNC_FILE=y
+# CONFIG_VIRTIO_MENU is not set
+# CONFIG_VHOST_MENU is not set
+CONFIG_STAGING=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PWM=y
+CONFIG_GENERIC_PHY=y
+CONFIG_PECI=y
+CONFIG_PECI_CPU=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_SQUASHFS_ZSTD=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_UTF8=y
+CONFIG_KEYS=y
+CONFIG_HARDENED_USERCOPY=y
+CONFIG_FORTIFY_SOURCE=y
+CONFIG_CRYPTO_RSA=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_CMAC=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_ASYMMETRIC_KEY_TYPE=y
+CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
+CONFIG_X509_CERTIFICATE_PARSER=y
+CONFIG_PKCS7_MESSAGE_PARSER=y
+CONFIG_SYSTEM_TRUSTED_KEYRING=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
+CONFIG_IO_STRICT_DEVMEM=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_UART_8250=y
+CONFIG_DEBUG_UART_PHYS=0xb8000000
+CONFIG_DEBUG_UART_VIRT=0x0ff000000
+CONFIG_DEBUG_UART_8250_WORD=y
+CONFIG_EARLY_PRINTK=y
diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig
deleted file mode 100644
index 0453948d52ef..000000000000
--- a/arch/arm/configs/xcep_defconfig
+++ /dev/null
@@ -1,89 +0,0 @@
-CONFIG_LOCALVERSION=".xcep-itech"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_UID16 is not set
-# CONFIG_SHMEM is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_XCEP=y
-CONFIG_IWMMXT=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLOCK is not set
-CONFIG_SLOB=y
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_PXA=m
-CONFIG_HWMON=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_MAX6650=m
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SA1100=m
-CONFIG_DMADEVICES=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_UTF8=m
-# CONFIG_CRYPTO_HW is not set
-CONFIG_LIBCRC32C=m
-CONFIG_PRINTK_TIME=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
deleted file mode 100644
index c4535315e216..000000000000
--- a/arch/arm/configs/zeus_defconfig
+++ /dev/null
@@ -1,173 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_TINY_RCU=y
-CONFIG_LOG_BUF_SHIFT=13
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_ARCOM_ZEUS=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_CFG80211=m
-CONFIG_LIB80211=m
-CONFIG_MAC80211=m
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_EEPROM_AT24=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ATA=m
-# CONFIG_SATA_PMP is not set
-CONFIG_PATA_PCMCIA=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-CONFIG_RT2X00=m
-CONFIG_RT73USB=m
-CONFIG_NET_PCMCIA=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_FUJITSU=m
-CONFIG_TOUCHSCREEN_ELO=m
-CONFIG_TOUCHSCREEN_MTOUCH=m
-CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_HTCPEN=m
-CONFIG_TOUCHSCREEN_PENMOUNT=m
-CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
-CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_TOUCHIT213=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=7
-CONFIG_SERIAL_8250_RUNTIME_UARTS=7
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_SENSORS_LM75=m
-CONFIG_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_PXA=m
-CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_PXA2XX_AC97=m
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_PCMCIA is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_USB=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_PXA27X=y
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_G_PRINTER=m
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_ISL1208=m
-CONFIG_RTC_DRV_PXA=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRC_T10DIF=m
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig
index 149a5bd6b88c..c436eec22d86 100644
--- a/arch/arm/crypto/Kconfig
+++ b/arch/arm/crypto/Kconfig
@@ -1,92 +1,62 @@
 # SPDX-License-Identifier: GPL-2.0
 
-menuconfig ARM_CRYPTO
-	bool "ARM Accelerated Cryptographic Algorithms"
-	depends on ARM
-	help
-	  Say Y here to choose from a selection of cryptographic algorithms
-	  implemented using ARM specific CPU features or instructions.
-
-if ARM_CRYPTO
-
-config CRYPTO_SHA1_ARM
-	tristate "SHA1 digest algorithm (ARM-asm)"
-	select CRYPTO_SHA1
-	select CRYPTO_HASH
-	help
-	  SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
-	  using optimized ARM assembler.
-
-config CRYPTO_SHA1_ARM_NEON
-	tristate "SHA1 digest algorithm (ARM NEON)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_SHA1_ARM
-	select CRYPTO_SHA1
-	select CRYPTO_HASH
-	help
-	  SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
-	  using optimized ARM NEON assembly, when NEON instructions are
-	  available.
+menu "Accelerated Cryptographic Algorithms for CPU (arm)"
 
-config CRYPTO_SHA1_ARM_CE
-	tristate "SHA1 digest algorithm (ARM v8 Crypto Extensions)"
+config CRYPTO_GHASH_ARM_CE
+	tristate "Hash functions: GHASH (PMULL/NEON/ARMv8 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
-	select CRYPTO_SHA1_ARM
+	select CRYPTO_AEAD
 	select CRYPTO_HASH
+	select CRYPTO_CRYPTD
+	select CRYPTO_LIB_AES
+	select CRYPTO_LIB_GF128MUL
 	help
-	  SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
-	  using special ARMv8 Crypto Extensions.
+	  GCM GHASH function (NIST SP800-38D)
 
-config CRYPTO_SHA2_ARM_CE
-	tristate "SHA-224/256 digest algorithm (ARM v8 Crypto Extensions)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_SHA256_ARM
-	select CRYPTO_HASH
-	help
-	  SHA-256 secure hash standard (DFIPS 180-2) implemented
-	  using special ARMv8 Crypto Extensions.
+	  Architecture: arm using
+	  - PMULL (Polynomial Multiply Long) instructions
+	  - NEON (Advanced SIMD) extensions
+	  - ARMv8 Crypto Extensions
 
-config CRYPTO_SHA256_ARM
-	tristate "SHA-224/256 digest algorithm (ARM-asm and NEON)"
-	select CRYPTO_HASH
-	depends on !CPU_V7M
-	help
-	  SHA-256 secure hash standard (DFIPS 180-2) implemented
-	  using optimized ARM assembler and NEON, when available.
+	  Use an implementation of GHASH (used by the GCM AEAD chaining mode)
+	  that uses the 64x64 to 128 bit polynomial multiplication (vmull.p64)
+	  that is part of the ARMv8 Crypto Extensions, or a slower variant that
+	  uses the vmull.p8 instruction that is part of the basic NEON ISA.
 
-config CRYPTO_SHA512_ARM
-	tristate "SHA-384/512 digest algorithm (ARM-asm and NEON)"
-	select CRYPTO_HASH
-	depends on !CPU_V7M
+config CRYPTO_NHPOLY1305_NEON
+	tristate "Hash functions: NHPoly1305 (NEON)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_NHPOLY1305
 	help
-	  SHA-512 secure hash standard (DFIPS 180-2) implemented
-	  using optimized ARM assembler and NEON, when available.
+	  NHPoly1305 hash function (Adiantum)
 
-config CRYPTO_BLAKE2S_ARM
-	bool "BLAKE2s digest algorithm (ARM)"
-	select CRYPTO_ARCH_HAVE_LIB_BLAKE2S
-	help
-	  BLAKE2s digest algorithm optimized with ARM scalar instructions.  This
-	  is faster than the generic implementations of BLAKE2s and BLAKE2b, but
-	  slower than the NEON implementation of BLAKE2b.  (There is no NEON
-	  implementation of BLAKE2s, since NEON doesn't really help with it.)
+	  Architecture: arm using:
+	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_BLAKE2B_NEON
-	tristate "BLAKE2b digest algorithm (ARM NEON)"
+	tristate "Hash functions: BLAKE2b (NEON)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_BLAKE2B
 	help
+	  BLAKE2b cryptographic hash function (RFC 7693)
+
+	  Architecture: arm using
+	  - NEON (Advanced SIMD) extensions
+
 	  BLAKE2b digest algorithm optimized with ARM NEON instructions.
 	  On ARM processors that have NEON support but not the ARMv8
 	  Crypto Extensions, typically this BLAKE2b implementation is
-	  much faster than SHA-2 and slightly faster than SHA-1.
+	  much faster than the SHA-2 family and slightly faster than
+	  SHA-1.
 
 config CRYPTO_AES_ARM
-	tristate "Scalar AES cipher for ARM"
+	tristate "Ciphers: AES"
 	select CRYPTO_ALGAPI
 	select CRYPTO_AES
 	help
-	  Use optimized AES assembler routines for ARM platforms.
+	  Block ciphers: AES cipher algorithms (FIPS-197)
+
+	  Architecture: arm
 
 	  On ARM processors without the Crypto Extensions, this is the
 	  fastest AES implementation for single blocks.  For multiple
@@ -98,76 +68,50 @@ config CRYPTO_AES_ARM
 	  such attacks very difficult.
 
 config CRYPTO_AES_ARM_BS
-	tristate "Bit sliced AES using NEON instructions"
+	tristate "Ciphers: AES, modes: ECB/CBC/CTR/XTS (bit-sliced NEON)"
 	depends on KERNEL_MODE_NEON
+	select CRYPTO_AES_ARM
 	select CRYPTO_SKCIPHER
 	select CRYPTO_LIB_AES
-	select CRYPTO_AES
-	select CRYPTO_CBC
-	select CRYPTO_SIMD
 	help
-	  Use a faster and more secure NEON based implementation of AES in CBC,
-	  CTR and XTS modes
+	  Length-preserving ciphers: AES cipher algorithms (FIPS-197)
+	  with block cipher modes:
+	   - ECB (Electronic Codebook) mode (NIST SP800-38A)
+	   - CBC (Cipher Block Chaining) mode (NIST SP800-38A)
+	   - CTR (Counter) mode (NIST SP800-38A)
+	   - XTS (XOR Encrypt XOR with ciphertext stealing) mode (NIST SP800-38E
+	     and IEEE 1619)
 
 	  Bit sliced AES gives around 45% speedup on Cortex-A15 for CTR mode
 	  and for XTS mode encryption, CBC and XTS mode decryption speedup is
 	  around 25%. (CBC encryption speed is not affected by this driver.)
-	  This implementation does not rely on any lookup tables so it is
-	  believed to be invulnerable to cache timing attacks.
+
+	  The bit sliced AES code does not use lookup tables, so it is believed
+	  to be invulnerable to cache timing attacks. However, since the bit
+	  sliced AES code cannot process single blocks efficiently, in certain
+	  cases table-based code with some countermeasures against cache timing
+	  attacks will still be used as a fallback method; specifically CBC
+	  encryption (not CBC decryption), the encryption of XTS tweaks, XTS
+	  ciphertext stealing when the message isn't a multiple of 16 bytes, and
+	  CTR when invoked in a context in which NEON instructions are unusable.
 
 config CRYPTO_AES_ARM_CE
-	tristate "Accelerated AES using ARMv8 Crypto Extensions"
+	tristate "Ciphers: AES, modes: ECB/CBC/CTS/CTR/XTS (ARMv8 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SKCIPHER
 	select CRYPTO_LIB_AES
-	select CRYPTO_SIMD
 	help
-	  Use an implementation of AES in CBC, CTR and XTS modes that uses
-	  ARMv8 Crypto Extensions
+	  Length-preserving ciphers: AES cipher algorithms (FIPS-197)
+	   with block cipher modes:
+	   - ECB (Electronic Codebook) mode (NIST SP800-38A)
+	   - CBC (Cipher Block Chaining) mode (NIST SP800-38A)
+	   - CTR (Counter) mode (NIST SP800-38A)
+	   - CTS (Cipher Text Stealing) mode (NIST SP800-38A)
+	   - XTS (XOR Encrypt XOR with ciphertext stealing) mode (NIST SP800-38E
+	     and IEEE 1619)
 
-config CRYPTO_GHASH_ARM_CE
-	tristate "PMULL-accelerated GHASH using NEON/ARMv8 Crypto Extensions"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_HASH
-	select CRYPTO_CRYPTD
-	select CRYPTO_GF128MUL
-	help
-	  Use an implementation of GHASH (used by the GCM AEAD chaining mode)
-	  that uses the 64x64 to 128 bit polynomial multiplication (vmull.p64)
-	  that is part of the ARMv8 Crypto Extensions, or a slower variant that
-	  uses the vmull.p8 instruction that is part of the basic NEON ISA.
+	  Architecture: arm using:
+	  - ARMv8 Crypto Extensions
 
-config CRYPTO_CRCT10DIF_ARM_CE
-	tristate "CRCT10DIF digest algorithm using PMULL instructions"
-	depends on KERNEL_MODE_NEON
-	depends on CRC_T10DIF
-	select CRYPTO_HASH
-
-config CRYPTO_CRC32_ARM_CE
-	tristate "CRC32(C) digest algorithm using CRC and/or PMULL instructions"
-	depends on KERNEL_MODE_NEON
-	depends on CRC32
-	select CRYPTO_HASH
-
-config CRYPTO_CHACHA20_NEON
-	tristate "NEON and scalar accelerated ChaCha stream cipher algorithms"
-	select CRYPTO_SKCIPHER
-	select CRYPTO_ARCH_HAVE_LIB_CHACHA
-
-config CRYPTO_POLY1305_ARM
-	tristate "Accelerated scalar and SIMD Poly1305 hash implementations"
-	select CRYPTO_HASH
-	select CRYPTO_ARCH_HAVE_LIB_POLY1305
-
-config CRYPTO_NHPOLY1305_NEON
-	tristate "NEON accelerated NHPoly1305 hash function (for Adiantum)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_NHPOLY1305
-
-config CRYPTO_CURVE25519_NEON
-	tristate "NEON accelerated Curve25519 scalar multiplication library"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_LIB_CURVE25519_GENERIC
-	select CRYPTO_ARCH_HAVE_LIB_CURVE25519
+endmenu
 
-endif
diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile
index 971e74546fb1..6346a73effc0 100644
--- a/arch/arm/crypto/Makefile
+++ b/arch/arm/crypto/Makefile
@@ -5,55 +5,15 @@
 
 obj-$(CONFIG_CRYPTO_AES_ARM) += aes-arm.o
 obj-$(CONFIG_CRYPTO_AES_ARM_BS) += aes-arm-bs.o
-obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o
-obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o
-obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o
-obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o
-obj-$(CONFIG_CRYPTO_BLAKE2S_ARM) += libblake2s-arm.o
 obj-$(CONFIG_CRYPTO_BLAKE2B_NEON) += blake2b-neon.o
-obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
-obj-$(CONFIG_CRYPTO_POLY1305_ARM) += poly1305-arm.o
 obj-$(CONFIG_CRYPTO_NHPOLY1305_NEON) += nhpoly1305-neon.o
-obj-$(CONFIG_CRYPTO_CURVE25519_NEON) += curve25519-neon.o
 
 obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o
-obj-$(CONFIG_CRYPTO_SHA1_ARM_CE) += sha1-arm-ce.o
-obj-$(CONFIG_CRYPTO_SHA2_ARM_CE) += sha2-arm-ce.o
 obj-$(CONFIG_CRYPTO_GHASH_ARM_CE) += ghash-arm-ce.o
-obj-$(CONFIG_CRYPTO_CRCT10DIF_ARM_CE) += crct10dif-arm-ce.o
-obj-$(CONFIG_CRYPTO_CRC32_ARM_CE) += crc32-arm-ce.o
 
 aes-arm-y	:= aes-cipher-core.o aes-cipher-glue.o
 aes-arm-bs-y	:= aes-neonbs-core.o aes-neonbs-glue.o
-sha1-arm-y	:= sha1-armv4-large.o sha1_glue.o
-sha1-arm-neon-y	:= sha1-armv7-neon.o sha1_neon_glue.o
-sha256-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha256_neon_glue.o
-sha256-arm-y	:= sha256-core.o sha256_glue.o $(sha256-arm-neon-y)
-sha512-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha512-neon-glue.o
-sha512-arm-y	:= sha512-core.o sha512-glue.o $(sha512-arm-neon-y)
-libblake2s-arm-y:= blake2s-core.o blake2s-glue.o
 blake2b-neon-y  := blake2b-neon-core.o blake2b-neon-glue.o
-sha1-arm-ce-y	:= sha1-ce-core.o sha1-ce-glue.o
-sha2-arm-ce-y	:= sha2-ce-core.o sha2-ce-glue.o
 aes-arm-ce-y	:= aes-ce-core.o aes-ce-glue.o
 ghash-arm-ce-y	:= ghash-ce-core.o ghash-ce-glue.o
-crct10dif-arm-ce-y	:= crct10dif-ce-core.o crct10dif-ce-glue.o
-crc32-arm-ce-y:= crc32-ce-core.o crc32-ce-glue.o
-chacha-neon-y := chacha-scalar-core.o chacha-glue.o
-chacha-neon-$(CONFIG_KERNEL_MODE_NEON) += chacha-neon-core.o
-poly1305-arm-y := poly1305-core.o poly1305-glue.o
 nhpoly1305-neon-y := nh-neon-core.o nhpoly1305-neon-glue.o
-curve25519-neon-y := curve25519-core.o curve25519-glue.o
-
-quiet_cmd_perl = PERL    $@
-      cmd_perl = $(PERL) $(<) > $(@)
-
-$(obj)/%-core.S: $(src)/%-armv4.pl
-	$(call cmd,perl)
-
-clean-files += poly1305-core.S sha256-core.S sha512-core.S
-
-# massage the perlasm code a bit so we only get the NEON routine if we need it
-poly1305-aflags-$(CONFIG_CPU_V7) := -U__LINUX_ARM_ARCH__ -D__LINUX_ARM_ARCH__=5
-poly1305-aflags-$(CONFIG_KERNEL_MODE_NEON) := -U__LINUX_ARM_ARCH__ -D__LINUX_ARM_ARCH__=7
-AFLAGS_poly1305-core.o += $(poly1305-aflags-y)
diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c
index b668c97663ec..00591895d540 100644
--- a/arch/arm/crypto/aes-ce-glue.c
+++ b/arch/arm/crypto/aes-ce-glue.c
@@ -8,10 +8,8 @@
 #include <asm/hwcap.h>
 #include <asm/neon.h>
 #include <asm/simd.h>
-#include <asm/unaligned.h>
+#include <linux/unaligned.h>
 #include <crypto/aes.h>
-#include <crypto/ctr.h>
-#include <crypto/internal/simd.h>
 #include <crypto/internal/skcipher.h>
 #include <crypto/scatterwalk.h>
 #include <linux/cpufeature.h>
@@ -399,9 +397,9 @@ static int ctr_encrypt(struct skcipher_request *req)
 	}
 	if (walk.nbytes) {
 		u8 __aligned(8) tail[AES_BLOCK_SIZE];
+		const u8 *tsrc = walk.src.virt.addr;
 		unsigned int nbytes = walk.nbytes;
 		u8 *tdst = walk.dst.virt.addr;
-		u8 *tsrc = walk.src.virt.addr;
 
 		/*
 		 * Tell aes_ctr_encrypt() to process a tail block.
@@ -418,29 +416,6 @@ static int ctr_encrypt(struct skcipher_request *req)
 	return err;
 }
 
-static void ctr_encrypt_one(struct crypto_skcipher *tfm, const u8 *src, u8 *dst)
-{
-	struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm);
-	unsigned long flags;
-
-	/*
-	 * Temporarily disable interrupts to avoid races where
-	 * cachelines are evicted when the CPU is interrupted
-	 * to do something else.
-	 */
-	local_irq_save(flags);
-	aes_encrypt(ctx, dst, src);
-	local_irq_restore(flags);
-}
-
-static int ctr_encrypt_sync(struct skcipher_request *req)
-{
-	if (!crypto_simd_usable())
-		return crypto_ctr_encrypt_walk(req, ctr_encrypt_one);
-
-	return ctr_encrypt(req);
-}
-
 static int xts_encrypt(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
@@ -586,10 +561,9 @@ static int xts_decrypt(struct skcipher_request *req)
 }
 
 static struct skcipher_alg aes_algs[] = { {
-	.base.cra_name		= "__ecb(aes)",
-	.base.cra_driver_name	= "__ecb-aes-ce",
+	.base.cra_name		= "ecb(aes)",
+	.base.cra_driver_name	= "ecb-aes-ce",
 	.base.cra_priority	= 300,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct crypto_aes_ctx),
 	.base.cra_module	= THIS_MODULE,
@@ -600,10 +574,9 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= ecb_encrypt,
 	.decrypt		= ecb_decrypt,
 }, {
-	.base.cra_name		= "__cbc(aes)",
-	.base.cra_driver_name	= "__cbc-aes-ce",
+	.base.cra_name		= "cbc(aes)",
+	.base.cra_driver_name	= "cbc-aes-ce",
 	.base.cra_priority	= 300,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct crypto_aes_ctx),
 	.base.cra_module	= THIS_MODULE,
@@ -615,10 +588,9 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= cbc_encrypt,
 	.decrypt		= cbc_decrypt,
 }, {
-	.base.cra_name		= "__cts(cbc(aes))",
-	.base.cra_driver_name	= "__cts-cbc-aes-ce",
+	.base.cra_name		= "cts(cbc(aes))",
+	.base.cra_driver_name	= "cts-cbc-aes-ce",
 	.base.cra_priority	= 300,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct crypto_aes_ctx),
 	.base.cra_module	= THIS_MODULE,
@@ -631,10 +603,9 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= cts_cbc_encrypt,
 	.decrypt		= cts_cbc_decrypt,
 }, {
-	.base.cra_name		= "__ctr(aes)",
-	.base.cra_driver_name	= "__ctr-aes-ce",
+	.base.cra_name		= "ctr(aes)",
+	.base.cra_driver_name	= "ctr-aes-ce",
 	.base.cra_priority	= 300,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 	.base.cra_blocksize	= 1,
 	.base.cra_ctxsize	= sizeof(struct crypto_aes_ctx),
 	.base.cra_module	= THIS_MODULE,
@@ -647,25 +618,9 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= ctr_encrypt,
 	.decrypt		= ctr_encrypt,
 }, {
-	.base.cra_name		= "ctr(aes)",
-	.base.cra_driver_name	= "ctr-aes-ce-sync",
-	.base.cra_priority	= 300 - 1,
-	.base.cra_blocksize	= 1,
-	.base.cra_ctxsize	= sizeof(struct crypto_aes_ctx),
-	.base.cra_module	= THIS_MODULE,
-
-	.min_keysize		= AES_MIN_KEY_SIZE,
-	.max_keysize		= AES_MAX_KEY_SIZE,
-	.ivsize			= AES_BLOCK_SIZE,
-	.chunksize		= AES_BLOCK_SIZE,
-	.setkey			= ce_aes_setkey,
-	.encrypt		= ctr_encrypt_sync,
-	.decrypt		= ctr_encrypt_sync,
-}, {
-	.base.cra_name		= "__xts(aes)",
-	.base.cra_driver_name	= "__xts-aes-ce",
+	.base.cra_name		= "xts(aes)",
+	.base.cra_driver_name	= "xts-aes-ce",
 	.base.cra_priority	= 300,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct crypto_aes_xts_ctx),
 	.base.cra_module	= THIS_MODULE,
@@ -679,51 +634,14 @@ static struct skcipher_alg aes_algs[] = { {
 	.decrypt		= xts_decrypt,
 } };
 
-static struct simd_skcipher_alg *aes_simd_algs[ARRAY_SIZE(aes_algs)];
-
 static void aes_exit(void)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(aes_simd_algs) && aes_simd_algs[i]; i++)
-		simd_skcipher_free(aes_simd_algs[i]);
-
 	crypto_unregister_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
 }
 
 static int __init aes_init(void)
 {
-	struct simd_skcipher_alg *simd;
-	const char *basename;
-	const char *algname;
-	const char *drvname;
-	int err;
-	int i;
-
-	err = crypto_register_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
-	if (err)
-		return err;
-
-	for (i = 0; i < ARRAY_SIZE(aes_algs); i++) {
-		if (!(aes_algs[i].base.cra_flags & CRYPTO_ALG_INTERNAL))
-			continue;
-
-		algname = aes_algs[i].base.cra_name + 2;
-		drvname = aes_algs[i].base.cra_driver_name + 2;
-		basename = aes_algs[i].base.cra_driver_name;
-		simd = simd_skcipher_create_compat(algname, drvname, basename);
-		err = PTR_ERR(simd);
-		if (IS_ERR(simd))
-			goto unregister_simds;
-
-		aes_simd_algs[i] = simd;
-	}
-
-	return 0;
-
-unregister_simds:
-	aes_exit();
-	return err;
+	return crypto_register_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
 }
 
 module_cpu_feature_match(AES, aes_init);
diff --git a/arch/arm/crypto/aes-cipher-glue.c b/arch/arm/crypto/aes-cipher-glue.c
index 8cd00f56800e..29efb7833960 100644
--- a/arch/arm/crypto/aes-cipher-glue.c
+++ b/arch/arm/crypto/aes-cipher-glue.c
@@ -7,11 +7,12 @@
  */
 
 #include <crypto/aes.h>
-#include <linux/crypto.h>
+#include <crypto/algapi.h>
 #include <linux/module.h>
+#include "aes-cipher.h"
 
-asmlinkage void __aes_arm_encrypt(u32 *rk, int rounds, const u8 *in, u8 *out);
-asmlinkage void __aes_arm_decrypt(u32 *rk, int rounds, const u8 *in, u8 *out);
+EXPORT_SYMBOL_GPL(__aes_arm_encrypt);
+EXPORT_SYMBOL_GPL(__aes_arm_decrypt);
 
 static void aes_arm_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 {
diff --git a/arch/arm/crypto/aes-cipher.h b/arch/arm/crypto/aes-cipher.h
new file mode 100644
index 000000000000..d5db2b87eb69
--- /dev/null
+++ b/arch/arm/crypto/aes-cipher.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef ARM_CRYPTO_AES_CIPHER_H
+#define ARM_CRYPTO_AES_CIPHER_H
+
+#include <linux/linkage.h>
+#include <linux/types.h>
+
+asmlinkage void __aes_arm_encrypt(const u32 rk[], int rounds,
+				  const u8 *in, u8 *out);
+asmlinkage void __aes_arm_decrypt(const u32 rk[], int rounds,
+				  const u8 *in, u8 *out);
+
+#endif /* ARM_CRYPTO_AES_CIPHER_H */
diff --git a/arch/arm/crypto/aes-neonbs-glue.c b/arch/arm/crypto/aes-neonbs-glue.c
index f00f042ef357..df5afe601e4a 100644
--- a/arch/arm/crypto/aes-neonbs-glue.c
+++ b/arch/arm/crypto/aes-neonbs-glue.c
@@ -8,24 +8,21 @@
 #include <asm/neon.h>
 #include <asm/simd.h>
 #include <crypto/aes.h>
-#include <crypto/ctr.h>
-#include <crypto/internal/cipher.h>
-#include <crypto/internal/simd.h>
 #include <crypto/internal/skcipher.h>
 #include <crypto/scatterwalk.h>
 #include <crypto/xts.h>
 #include <linux/module.h>
+#include "aes-cipher.h"
 
 MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_DESCRIPTION("Bit sliced AES using NEON instructions");
 MODULE_LICENSE("GPL v2");
 
 MODULE_ALIAS_CRYPTO("ecb(aes)");
-MODULE_ALIAS_CRYPTO("cbc(aes)-all");
+MODULE_ALIAS_CRYPTO("cbc(aes)");
 MODULE_ALIAS_CRYPTO("ctr(aes)");
 MODULE_ALIAS_CRYPTO("xts(aes)");
 
-MODULE_IMPORT_NS(CRYPTO_INTERNAL);
-
 asmlinkage void aesbs_convert_key(u8 out[], u32 const rk[], int rounds);
 
 asmlinkage void aesbs_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[],
@@ -51,18 +48,13 @@ struct aesbs_ctx {
 
 struct aesbs_cbc_ctx {
 	struct aesbs_ctx	key;
-	struct crypto_skcipher	*enc_tfm;
+	struct crypto_aes_ctx	fallback;
 };
 
 struct aesbs_xts_ctx {
 	struct aesbs_ctx	key;
-	struct crypto_cipher	*cts_tfm;
-	struct crypto_cipher	*tweak_tfm;
-};
-
-struct aesbs_ctr_ctx {
-	struct aesbs_ctx	key;		/* must be first member */
 	struct crypto_aes_ctx	fallback;
+	struct crypto_aes_ctx	tweak_key;
 };
 
 static int aesbs_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
@@ -128,37 +120,49 @@ static int aesbs_cbc_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
 			    unsigned int key_len)
 {
 	struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct crypto_aes_ctx rk;
 	int err;
 
-	err = aes_expandkey(&rk, in_key, key_len);
+	err = aes_expandkey(&ctx->fallback, in_key, key_len);
 	if (err)
 		return err;
 
 	ctx->key.rounds = 6 + key_len / 4;
 
 	kernel_neon_begin();
-	aesbs_convert_key(ctx->key.rk, rk.key_enc, ctx->key.rounds);
+	aesbs_convert_key(ctx->key.rk, ctx->fallback.key_enc, ctx->key.rounds);
 	kernel_neon_end();
-	memzero_explicit(&rk, sizeof(rk));
 
-	return crypto_skcipher_setkey(ctx->enc_tfm, in_key, key_len);
+	return 0;
 }
 
 static int cbc_encrypt(struct skcipher_request *req)
 {
-	struct skcipher_request *subreq = skcipher_request_ctx(req);
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
+	const struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct skcipher_walk walk;
+	unsigned int nbytes;
+	int err;
 
-	skcipher_request_set_tfm(subreq, ctx->enc_tfm);
-	skcipher_request_set_callback(subreq,
-				      skcipher_request_flags(req),
-				      NULL, NULL);
-	skcipher_request_set_crypt(subreq, req->src, req->dst,
-				   req->cryptlen, req->iv);
+	err = skcipher_walk_virt(&walk, req, false);
 
-	return crypto_skcipher_encrypt(subreq);
+	while ((nbytes = walk.nbytes) >= AES_BLOCK_SIZE) {
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
+		u8 *prev = walk.iv;
+
+		do {
+			crypto_xor_cpy(dst, src, prev, AES_BLOCK_SIZE);
+			__aes_arm_encrypt(ctx->fallback.key_enc,
+					  ctx->key.rounds, dst, dst);
+			prev = dst;
+			src += AES_BLOCK_SIZE;
+			dst += AES_BLOCK_SIZE;
+			nbytes -= AES_BLOCK_SIZE;
+		} while (nbytes >= AES_BLOCK_SIZE);
+		memcpy(walk.iv, prev, AES_BLOCK_SIZE);
+		err = skcipher_walk_done(&walk, nbytes);
+	}
+	return err;
 }
 
 static int cbc_decrypt(struct skcipher_request *req)
@@ -189,49 +193,6 @@ static int cbc_decrypt(struct skcipher_request *req)
 	return err;
 }
 
-static int cbc_init(struct crypto_skcipher *tfm)
-{
-	struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
-	unsigned int reqsize;
-
-	ctx->enc_tfm = crypto_alloc_skcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC |
-					     CRYPTO_ALG_NEED_FALLBACK);
-	if (IS_ERR(ctx->enc_tfm))
-		return PTR_ERR(ctx->enc_tfm);
-
-	reqsize = sizeof(struct skcipher_request);
-	reqsize += crypto_skcipher_reqsize(ctx->enc_tfm);
-	crypto_skcipher_set_reqsize(tfm, reqsize);
-
-	return 0;
-}
-
-static void cbc_exit(struct crypto_skcipher *tfm)
-{
-	struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
-
-	crypto_free_skcipher(ctx->enc_tfm);
-}
-
-static int aesbs_ctr_setkey_sync(struct crypto_skcipher *tfm, const u8 *in_key,
-				 unsigned int key_len)
-{
-	struct aesbs_ctr_ctx *ctx = crypto_skcipher_ctx(tfm);
-	int err;
-
-	err = aes_expandkey(&ctx->fallback, in_key, key_len);
-	if (err)
-		return err;
-
-	ctx->key.rounds = 6 + key_len / 4;
-
-	kernel_neon_begin();
-	aesbs_convert_key(ctx->key.rk, ctx->fallback.key_enc, ctx->key.rounds);
-	kernel_neon_end();
-
-	return 0;
-}
-
 static int ctr_encrypt(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
@@ -245,7 +206,7 @@ static int ctr_encrypt(struct skcipher_request *req)
 	while (walk.nbytes > 0) {
 		const u8 *src = walk.src.virt.addr;
 		u8 *dst = walk.dst.virt.addr;
-		int bytes = walk.nbytes;
+		unsigned int bytes = walk.nbytes;
 
 		if (unlikely(bytes < AES_BLOCK_SIZE))
 			src = dst = memcpy(buf + sizeof(buf) - bytes,
@@ -267,29 +228,6 @@ static int ctr_encrypt(struct skcipher_request *req)
 	return err;
 }
 
-static void ctr_encrypt_one(struct crypto_skcipher *tfm, const u8 *src, u8 *dst)
-{
-	struct aesbs_ctr_ctx *ctx = crypto_skcipher_ctx(tfm);
-	unsigned long flags;
-
-	/*
-	 * Temporarily disable interrupts to avoid races where
-	 * cachelines are evicted when the CPU is interrupted
-	 * to do something else.
-	 */
-	local_irq_save(flags);
-	aes_encrypt(&ctx->fallback, dst, src);
-	local_irq_restore(flags);
-}
-
-static int ctr_encrypt_sync(struct skcipher_request *req)
-{
-	if (!crypto_simd_usable())
-		return crypto_ctr_encrypt_walk(req, ctr_encrypt_one);
-
-	return ctr_encrypt(req);
-}
-
 static int aesbs_xts_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
 			    unsigned int key_len)
 {
@@ -301,45 +239,23 @@ static int aesbs_xts_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
 		return err;
 
 	key_len /= 2;
-	err = crypto_cipher_setkey(ctx->cts_tfm, in_key, key_len);
+	err = aes_expandkey(&ctx->fallback, in_key, key_len);
 	if (err)
 		return err;
-	err = crypto_cipher_setkey(ctx->tweak_tfm, in_key + key_len, key_len);
+	err = aes_expandkey(&ctx->tweak_key, in_key + key_len, key_len);
 	if (err)
 		return err;
 
 	return aesbs_setkey(tfm, in_key, key_len);
 }
 
-static int xts_init(struct crypto_skcipher *tfm)
-{
-	struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm);
-
-	ctx->cts_tfm = crypto_alloc_cipher("aes", 0, 0);
-	if (IS_ERR(ctx->cts_tfm))
-		return PTR_ERR(ctx->cts_tfm);
-
-	ctx->tweak_tfm = crypto_alloc_cipher("aes", 0, 0);
-	if (IS_ERR(ctx->tweak_tfm))
-		crypto_free_cipher(ctx->cts_tfm);
-
-	return PTR_ERR_OR_ZERO(ctx->tweak_tfm);
-}
-
-static void xts_exit(struct crypto_skcipher *tfm)
-{
-	struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm);
-
-	crypto_free_cipher(ctx->tweak_tfm);
-	crypto_free_cipher(ctx->cts_tfm);
-}
-
 static int __xts_crypt(struct skcipher_request *req, bool encrypt,
 		       void (*fn)(u8 out[], u8 const in[], u8 const rk[],
 				  int rounds, int blocks, u8 iv[], int))
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
 	struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm);
+	const int rounds = ctx->key.rounds;
 	int tail = req->cryptlen % AES_BLOCK_SIZE;
 	struct skcipher_request subreq;
 	u8 buf[2 * AES_BLOCK_SIZE];
@@ -363,7 +279,7 @@ static int __xts_crypt(struct skcipher_request *req, bool encrypt,
 	if (err)
 		return err;
 
-	crypto_cipher_encrypt_one(ctx->tweak_tfm, walk.iv, walk.iv);
+	__aes_arm_encrypt(ctx->tweak_key.key_enc, rounds, walk.iv, walk.iv);
 
 	while (walk.nbytes >= AES_BLOCK_SIZE) {
 		unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE;
@@ -377,7 +293,7 @@ static int __xts_crypt(struct skcipher_request *req, bool encrypt,
 
 		kernel_neon_begin();
 		fn(walk.dst.virt.addr, walk.src.virt.addr, ctx->key.rk,
-		   ctx->key.rounds, blocks, walk.iv, reorder_last_tweak);
+		   rounds, blocks, walk.iv, reorder_last_tweak);
 		kernel_neon_end();
 		err = skcipher_walk_done(&walk,
 					 walk.nbytes - blocks * AES_BLOCK_SIZE);
@@ -395,9 +311,9 @@ static int __xts_crypt(struct skcipher_request *req, bool encrypt,
 	crypto_xor(buf, req->iv, AES_BLOCK_SIZE);
 
 	if (encrypt)
-		crypto_cipher_encrypt_one(ctx->cts_tfm, buf, buf);
+		__aes_arm_encrypt(ctx->fallback.key_enc, rounds, buf, buf);
 	else
-		crypto_cipher_decrypt_one(ctx->cts_tfm, buf, buf);
+		__aes_arm_decrypt(ctx->fallback.key_dec, rounds, buf, buf);
 
 	crypto_xor(buf, req->iv, AES_BLOCK_SIZE);
 
@@ -417,13 +333,12 @@ static int xts_decrypt(struct skcipher_request *req)
 }
 
 static struct skcipher_alg aes_algs[] = { {
-	.base.cra_name		= "__ecb(aes)",
-	.base.cra_driver_name	= "__ecb-aes-neonbs",
+	.base.cra_name		= "ecb(aes)",
+	.base.cra_driver_name	= "ecb-aes-neonbs",
 	.base.cra_priority	= 250,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct aesbs_ctx),
 	.base.cra_module	= THIS_MODULE,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 
 	.min_keysize		= AES_MIN_KEY_SIZE,
 	.max_keysize		= AES_MAX_KEY_SIZE,
@@ -432,14 +347,12 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= ecb_encrypt,
 	.decrypt		= ecb_decrypt,
 }, {
-	.base.cra_name		= "__cbc(aes)",
-	.base.cra_driver_name	= "__cbc-aes-neonbs",
+	.base.cra_name		= "cbc(aes)",
+	.base.cra_driver_name	= "cbc-aes-neonbs",
 	.base.cra_priority	= 250,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct aesbs_cbc_ctx),
 	.base.cra_module	= THIS_MODULE,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL |
-				  CRYPTO_ALG_NEED_FALLBACK,
 
 	.min_keysize		= AES_MIN_KEY_SIZE,
 	.max_keysize		= AES_MAX_KEY_SIZE,
@@ -448,16 +361,13 @@ static struct skcipher_alg aes_algs[] = { {
 	.setkey			= aesbs_cbc_setkey,
 	.encrypt		= cbc_encrypt,
 	.decrypt		= cbc_decrypt,
-	.init			= cbc_init,
-	.exit			= cbc_exit,
 }, {
-	.base.cra_name		= "__ctr(aes)",
-	.base.cra_driver_name	= "__ctr-aes-neonbs",
+	.base.cra_name		= "ctr(aes)",
+	.base.cra_driver_name	= "ctr-aes-neonbs",
 	.base.cra_priority	= 250,
 	.base.cra_blocksize	= 1,
 	.base.cra_ctxsize	= sizeof(struct aesbs_ctx),
 	.base.cra_module	= THIS_MODULE,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 
 	.min_keysize		= AES_MIN_KEY_SIZE,
 	.max_keysize		= AES_MAX_KEY_SIZE,
@@ -468,29 +378,12 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= ctr_encrypt,
 	.decrypt		= ctr_encrypt,
 }, {
-	.base.cra_name		= "ctr(aes)",
-	.base.cra_driver_name	= "ctr-aes-neonbs-sync",
-	.base.cra_priority	= 250 - 1,
-	.base.cra_blocksize	= 1,
-	.base.cra_ctxsize	= sizeof(struct aesbs_ctr_ctx),
-	.base.cra_module	= THIS_MODULE,
-
-	.min_keysize		= AES_MIN_KEY_SIZE,
-	.max_keysize		= AES_MAX_KEY_SIZE,
-	.chunksize		= AES_BLOCK_SIZE,
-	.walksize		= 8 * AES_BLOCK_SIZE,
-	.ivsize			= AES_BLOCK_SIZE,
-	.setkey			= aesbs_ctr_setkey_sync,
-	.encrypt		= ctr_encrypt_sync,
-	.decrypt		= ctr_encrypt_sync,
-}, {
-	.base.cra_name		= "__xts(aes)",
-	.base.cra_driver_name	= "__xts-aes-neonbs",
+	.base.cra_name		= "xts(aes)",
+	.base.cra_driver_name	= "xts-aes-neonbs",
 	.base.cra_priority	= 250,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct aesbs_xts_ctx),
 	.base.cra_module	= THIS_MODULE,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 
 	.min_keysize		= 2 * AES_MIN_KEY_SIZE,
 	.max_keysize		= 2 * AES_MAX_KEY_SIZE,
@@ -499,59 +392,20 @@ static struct skcipher_alg aes_algs[] = { {
 	.setkey			= aesbs_xts_setkey,
 	.encrypt		= xts_encrypt,
 	.decrypt		= xts_decrypt,
-	.init			= xts_init,
-	.exit			= xts_exit,
 } };
 
-static struct simd_skcipher_alg *aes_simd_algs[ARRAY_SIZE(aes_algs)];
-
 static void aes_exit(void)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(aes_simd_algs); i++)
-		if (aes_simd_algs[i])
-			simd_skcipher_free(aes_simd_algs[i]);
-
 	crypto_unregister_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
 }
 
 static int __init aes_init(void)
 {
-	struct simd_skcipher_alg *simd;
-	const char *basename;
-	const char *algname;
-	const char *drvname;
-	int err;
-	int i;
-
 	if (!(elf_hwcap & HWCAP_NEON))
 		return -ENODEV;
 
-	err = crypto_register_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
-	if (err)
-		return err;
-
-	for (i = 0; i < ARRAY_SIZE(aes_algs); i++) {
-		if (!(aes_algs[i].base.cra_flags & CRYPTO_ALG_INTERNAL))
-			continue;
-
-		algname = aes_algs[i].base.cra_name + 2;
-		drvname = aes_algs[i].base.cra_driver_name + 2;
-		basename = aes_algs[i].base.cra_driver_name;
-		simd = simd_skcipher_create_compat(algname, drvname, basename);
-		err = PTR_ERR(simd);
-		if (IS_ERR(simd))
-			goto unregister_simds;
-
-		aes_simd_algs[i] = simd;
-	}
-	return 0;
-
-unregister_simds:
-	aes_exit();
-	return err;
+	return crypto_register_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
 }
 
-late_initcall(aes_init);
+module_init(aes_init);
 module_exit(aes_exit);
diff --git a/arch/arm/crypto/blake2b-neon-glue.c b/arch/arm/crypto/blake2b-neon-glue.c
index 4b59d027ba4a..2ff443a91724 100644
--- a/arch/arm/crypto/blake2b-neon-glue.c
+++ b/arch/arm/crypto/blake2b-neon-glue.c
@@ -7,7 +7,6 @@
 
 #include <crypto/internal/blake2b.h>
 #include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
 
 #include <linux/module.h>
 #include <linux/sizes.h>
@@ -21,11 +20,6 @@ asmlinkage void blake2b_compress_neon(struct blake2b_state *state,
 static void blake2b_compress_arch(struct blake2b_state *state,
 				  const u8 *block, size_t nblocks, u32 inc)
 {
-	if (!crypto_simd_usable()) {
-		blake2b_compress_generic(state, block, nblocks, inc);
-		return;
-	}
-
 	do {
 		const size_t blocks = min_t(size_t, nblocks,
 					    SZ_4K / BLAKE2B_BLOCK_SIZE);
@@ -42,12 +36,14 @@ static void blake2b_compress_arch(struct blake2b_state *state,
 static int crypto_blake2b_update_neon(struct shash_desc *desc,
 				      const u8 *in, unsigned int inlen)
 {
-	return crypto_blake2b_update(desc, in, inlen, blake2b_compress_arch);
+	return crypto_blake2b_update_bo(desc, in, inlen, blake2b_compress_arch);
 }
 
-static int crypto_blake2b_final_neon(struct shash_desc *desc, u8 *out)
+static int crypto_blake2b_finup_neon(struct shash_desc *desc, const u8 *in,
+				     unsigned int inlen, u8 *out)
 {
-	return crypto_blake2b_final(desc, out, blake2b_compress_arch);
+	return crypto_blake2b_finup(desc, in, inlen, out,
+				    blake2b_compress_arch);
 }
 
 #define BLAKE2B_ALG(name, driver_name, digest_size)			\
@@ -55,7 +51,9 @@ static int crypto_blake2b_final_neon(struct shash_desc *desc, u8 *out)
 		.base.cra_name		= name,				\
 		.base.cra_driver_name	= driver_name,			\
 		.base.cra_priority	= 200,				\
-		.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,	\
+		.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY |	\
+					  CRYPTO_AHASH_ALG_BLOCK_ONLY |	\
+					  CRYPTO_AHASH_ALG_FINAL_NONZERO, \
 		.base.cra_blocksize	= BLAKE2B_BLOCK_SIZE,		\
 		.base.cra_ctxsize	= sizeof(struct blake2b_tfm_ctx), \
 		.base.cra_module	= THIS_MODULE,			\
@@ -63,8 +61,9 @@ static int crypto_blake2b_final_neon(struct shash_desc *desc, u8 *out)
 		.setkey			= crypto_blake2b_setkey,	\
 		.init			= crypto_blake2b_init,		\
 		.update			= crypto_blake2b_update_neon,	\
-		.final			= crypto_blake2b_final_neon,	\
+		.finup			= crypto_blake2b_finup_neon,	\
 		.descsize		= sizeof(struct blake2b_state),	\
+		.statesize		= BLAKE2B_STATE_SIZE,		\
 	}
 
 static struct shash_alg blake2b_neon_algs[] = {
diff --git a/arch/arm/crypto/blake2s-core.S b/arch/arm/crypto/blake2s-core.S
deleted file mode 100644
index df40e46601f1..000000000000
--- a/arch/arm/crypto/blake2s-core.S
+++ /dev/null
@@ -1,306 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * BLAKE2s digest algorithm, ARM scalar implementation
- *
- * Copyright 2020 Google LLC
- *
- * Author: Eric Biggers <ebiggers@google.com>
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-	// Registers used to hold message words temporarily.  There aren't
-	// enough ARM registers to hold the whole message block, so we have to
-	// load the words on-demand.
-	M_0		.req	r12
-	M_1		.req	r14
-
-// The BLAKE2s initialization vector
-.Lblake2s_IV:
-	.word	0x6A09E667, 0xBB67AE85, 0x3C6EF372, 0xA54FF53A
-	.word	0x510E527F, 0x9B05688C, 0x1F83D9AB, 0x5BE0CD19
-
-.macro __ldrd		a, b, src, offset
-#if __LINUX_ARM_ARCH__ >= 6
-	ldrd		\a, \b, [\src, #\offset]
-#else
-	ldr		\a, [\src, #\offset]
-	ldr		\b, [\src, #\offset + 4]
-#endif
-.endm
-
-.macro __strd		a, b, dst, offset
-#if __LINUX_ARM_ARCH__ >= 6
-	strd		\a, \b, [\dst, #\offset]
-#else
-	str		\a, [\dst, #\offset]
-	str		\b, [\dst, #\offset + 4]
-#endif
-.endm
-
-.macro _le32_bswap	a, tmp
-#ifdef __ARMEB__
-	rev_l		\a, \tmp
-#endif
-.endm
-
-.macro _le32_bswap_8x	a, b, c, d, e, f, g, h,  tmp
-	_le32_bswap	\a, \tmp
-	_le32_bswap	\b, \tmp
-	_le32_bswap	\c, \tmp
-	_le32_bswap	\d, \tmp
-	_le32_bswap	\e, \tmp
-	_le32_bswap	\f, \tmp
-	_le32_bswap	\g, \tmp
-	_le32_bswap	\h, \tmp
-.endm
-
-// Execute a quarter-round of BLAKE2s by mixing two columns or two diagonals.
-// (a0, b0, c0, d0) and (a1, b1, c1, d1) give the registers containing the two
-// columns/diagonals.  s0-s1 are the word offsets to the message words the first
-// column/diagonal needs, and likewise s2-s3 for the second column/diagonal.
-// M_0 and M_1 are free to use, and the message block can be found at sp + 32.
-//
-// Note that to save instructions, the rotations don't happen when the
-// pseudocode says they should, but rather they are delayed until the values are
-// used.  See the comment above _blake2s_round().
-.macro _blake2s_quarterround  a0, b0, c0, d0,  a1, b1, c1, d1,  s0, s1, s2, s3
-
-	ldr		M_0, [sp, #32 + 4 * \s0]
-	ldr		M_1, [sp, #32 + 4 * \s2]
-
-	// a += b + m[blake2s_sigma[r][2*i + 0]];
-	add		\a0, \a0, \b0, ror #brot
-	add		\a1, \a1, \b1, ror #brot
-	add		\a0, \a0, M_0
-	add		\a1, \a1, M_1
-
-	// d = ror32(d ^ a, 16);
-	eor		\d0, \a0, \d0, ror #drot
-	eor		\d1, \a1, \d1, ror #drot
-
-	// c += d;
-	add		\c0, \c0, \d0, ror #16
-	add		\c1, \c1, \d1, ror #16
-
-	// b = ror32(b ^ c, 12);
-	eor		\b0, \c0, \b0, ror #brot
-	eor		\b1, \c1, \b1, ror #brot
-
-	ldr		M_0, [sp, #32 + 4 * \s1]
-	ldr		M_1, [sp, #32 + 4 * \s3]
-
-	// a += b + m[blake2s_sigma[r][2*i + 1]];
-	add		\a0, \a0, \b0, ror #12
-	add		\a1, \a1, \b1, ror #12
-	add		\a0, \a0, M_0
-	add		\a1, \a1, M_1
-
-	// d = ror32(d ^ a, 8);
-	eor		\d0, \a0, \d0, ror#16
-	eor		\d1, \a1, \d1, ror#16
-
-	// c += d;
-	add		\c0, \c0, \d0, ror#8
-	add		\c1, \c1, \d1, ror#8
-
-	// b = ror32(b ^ c, 7);
-	eor		\b0, \c0, \b0, ror#12
-	eor		\b1, \c1, \b1, ror#12
-.endm
-
-// Execute one round of BLAKE2s by updating the state matrix v[0..15].  v[0..9]
-// are in r0..r9.  The stack pointer points to 8 bytes of scratch space for
-// spilling v[8..9], then to v[9..15], then to the message block.  r10-r12 and
-// r14 are free to use.  The macro arguments s0-s15 give the order in which the
-// message words are used in this round.
-//
-// All rotates are performed using the implicit rotate operand accepted by the
-// 'add' and 'eor' instructions.  This is faster than using explicit rotate
-// instructions.  To make this work, we allow the values in the second and last
-// rows of the BLAKE2s state matrix (rows 'b' and 'd') to temporarily have the
-// wrong rotation amount.  The rotation amount is then fixed up just in time
-// when the values are used.  'brot' is the number of bits the values in row 'b'
-// need to be rotated right to arrive at the correct values, and 'drot'
-// similarly for row 'd'.  (brot, drot) start out as (0, 0) but we make it such
-// that they end up as (7, 8) after every round.
-.macro	_blake2s_round	s0, s1, s2, s3, s4, s5, s6, s7, \
-			s8, s9, s10, s11, s12, s13, s14, s15
-
-	// Mix first two columns:
-	// (v[0], v[4], v[8], v[12]) and (v[1], v[5], v[9], v[13]).
-	__ldrd		r10, r11, sp, 16	// load v[12] and v[13]
-	_blake2s_quarterround	r0, r4, r8, r10,  r1, r5, r9, r11, \
-				\s0, \s1, \s2, \s3
-	__strd		r8, r9, sp, 0
-	__strd		r10, r11, sp, 16
-
-	// Mix second two columns:
-	// (v[2], v[6], v[10], v[14]) and (v[3], v[7], v[11], v[15]).
-	__ldrd		r8, r9, sp, 8		// load v[10] and v[11]
-	__ldrd		r10, r11, sp, 24	// load v[14] and v[15]
-	_blake2s_quarterround	r2, r6, r8, r10,  r3, r7, r9, r11, \
-				\s4, \s5, \s6, \s7
-	str		r10, [sp, #24]		// store v[14]
-	// v[10], v[11], and v[15] are used below, so no need to store them yet.
-
-	.set brot, 7
-	.set drot, 8
-
-	// Mix first two diagonals:
-	// (v[0], v[5], v[10], v[15]) and (v[1], v[6], v[11], v[12]).
-	ldr		r10, [sp, #16]		// load v[12]
-	_blake2s_quarterround	r0, r5, r8, r11,  r1, r6, r9, r10, \
-				\s8, \s9, \s10, \s11
-	__strd		r8, r9, sp, 8
-	str		r11, [sp, #28]
-	str		r10, [sp, #16]
-
-	// Mix second two diagonals:
-	// (v[2], v[7], v[8], v[13]) and (v[3], v[4], v[9], v[14]).
-	__ldrd		r8, r9, sp, 0		// load v[8] and v[9]
-	__ldrd		r10, r11, sp, 20	// load v[13] and v[14]
-	_blake2s_quarterround	r2, r7, r8, r10,  r3, r4, r9, r11, \
-				\s12, \s13, \s14, \s15
-	__strd		r10, r11, sp, 20
-.endm
-
-//
-// void blake2s_compress(struct blake2s_state *state,
-//			 const u8 *block, size_t nblocks, u32 inc);
-//
-// Only the first three fields of struct blake2s_state are used:
-//	u32 h[8];	(inout)
-//	u32 t[2];	(inout)
-//	u32 f[2];	(in)
-//
-	.align		5
-ENTRY(blake2s_compress)
-	push		{r0-r2,r4-r11,lr}	// keep this an even number
-
-.Lnext_block:
-	// r0 is 'state'
-	// r1 is 'block'
-	// r3 is 'inc'
-
-	// Load and increment the counter t[0..1].
-	__ldrd		r10, r11, r0, 32
-	adds		r10, r10, r3
-	adc		r11, r11, #0
-	__strd		r10, r11, r0, 32
-
-	// _blake2s_round is very short on registers, so copy the message block
-	// to the stack to save a register during the rounds.  This also has the
-	// advantage that misalignment only needs to be dealt with in one place.
-	sub		sp, sp, #64
-	mov		r12, sp
-	tst		r1, #3
-	bne		.Lcopy_block_misaligned
-	ldmia		r1!, {r2-r9}
-	_le32_bswap_8x	r2, r3, r4, r5, r6, r7, r8, r9,  r14
-	stmia		r12!, {r2-r9}
-	ldmia		r1!, {r2-r9}
-	_le32_bswap_8x	r2, r3, r4, r5, r6, r7, r8, r9,  r14
-	stmia		r12, {r2-r9}
-.Lcopy_block_done:
-	str		r1, [sp, #68]		// Update message pointer
-
-	// Calculate v[8..15].  Push v[9..15] onto the stack, and leave space
-	// for spilling v[8..9].  Leave v[8..9] in r8-r9.
-	mov		r14, r0			// r14 = state
-	adr		r12, .Lblake2s_IV
-	ldmia		r12!, {r8-r9}		// load IV[0..1]
-	__ldrd		r0, r1, r14, 40		// load f[0..1]
-	ldm		r12, {r2-r7}		// load IV[3..7]
-	eor		r4, r4, r10		// v[12] = IV[4] ^ t[0]
-	eor		r5, r5, r11		// v[13] = IV[5] ^ t[1]
-	eor		r6, r6, r0		// v[14] = IV[6] ^ f[0]
-	eor		r7, r7, r1		// v[15] = IV[7] ^ f[1]
-	push		{r2-r7}			// push v[9..15]
-	sub		sp, sp, #8		// leave space for v[8..9]
-
-	// Load h[0..7] == v[0..7].
-	ldm		r14, {r0-r7}
-
-	// Execute the rounds.  Each round is provided the order in which it
-	// needs to use the message words.
-	.set brot, 0
-	.set drot, 0
-	_blake2s_round	0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
-	_blake2s_round	14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3
-	_blake2s_round	11, 8, 12, 0, 5, 2, 15, 13, 10, 14, 3, 6, 7, 1, 9, 4
-	_blake2s_round	7, 9, 3, 1, 13, 12, 11, 14, 2, 6, 5, 10, 4, 0, 15, 8
-	_blake2s_round	9, 0, 5, 7, 2, 4, 10, 15, 14, 1, 11, 12, 6, 8, 3, 13
-	_blake2s_round	2, 12, 6, 10, 0, 11, 8, 3, 4, 13, 7, 5, 15, 14, 1, 9
-	_blake2s_round	12, 5, 1, 15, 14, 13, 4, 10, 0, 7, 6, 3, 9, 2, 8, 11
-	_blake2s_round	13, 11, 7, 14, 12, 1, 3, 9, 5, 0, 15, 4, 8, 6, 2, 10
-	_blake2s_round	6, 15, 14, 9, 11, 3, 0, 8, 12, 2, 13, 7, 1, 4, 10, 5
-	_blake2s_round	10, 2, 8, 4, 7, 6, 1, 5, 15, 11, 9, 14, 3, 12, 13, 0
-
-	// Fold the final state matrix into the hash chaining value:
-	//
-	//	for (i = 0; i < 8; i++)
-	//		h[i] ^= v[i] ^ v[i + 8];
-	//
-	ldr		r14, [sp, #96]		// r14 = &h[0]
-	add		sp, sp, #8		// v[8..9] are already loaded.
-	pop		{r10-r11}		// load v[10..11]
-	eor		r0, r0, r8
-	eor		r1, r1, r9
-	eor		r2, r2, r10
-	eor		r3, r3, r11
-	ldm		r14, {r8-r11}		// load h[0..3]
-	eor		r0, r0, r8
-	eor		r1, r1, r9
-	eor		r2, r2, r10
-	eor		r3, r3, r11
-	stmia		r14!, {r0-r3}		// store new h[0..3]
-	ldm		r14, {r0-r3}		// load old h[4..7]
-	pop		{r8-r11}		// load v[12..15]
-	eor		r0, r0, r4, ror #brot
-	eor		r1, r1, r5, ror #brot
-	eor		r2, r2, r6, ror #brot
-	eor		r3, r3, r7, ror #brot
-	eor		r0, r0, r8, ror #drot
-	eor		r1, r1, r9, ror #drot
-	eor		r2, r2, r10, ror #drot
-	eor		r3, r3, r11, ror #drot
-	  add		sp, sp, #64		// skip copy of message block
-	stm		r14, {r0-r3}		// store new h[4..7]
-
-	// Advance to the next block, if there is one.  Note that if there are
-	// multiple blocks, then 'inc' (the counter increment amount) must be
-	// 64.  So we can simply set it to 64 without re-loading it.
-	ldm		sp, {r0, r1, r2}	// load (state, block, nblocks)
-	mov		r3, #64			// set 'inc'
-	subs		r2, r2, #1		// nblocks--
-	str		r2, [sp, #8]
-	bne		.Lnext_block		// nblocks != 0?
-
-	pop		{r0-r2,r4-r11,pc}
-
-	// The next message block (pointed to by r1) isn't 4-byte aligned, so it
-	// can't be loaded using ldmia.  Copy it to the stack buffer (pointed to
-	// by r12) using an alternative method.  r2-r9 are free to use.
-.Lcopy_block_misaligned:
-	mov		r2, #64
-1:
-#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
-	ldr		r3, [r1], #4
-	_le32_bswap	r3, r4
-#else
-	ldrb		r3, [r1, #0]
-	ldrb		r4, [r1, #1]
-	ldrb		r5, [r1, #2]
-	ldrb		r6, [r1, #3]
-	add		r1, r1, #4
-	orr		r3, r3, r4, lsl #8
-	orr		r3, r3, r5, lsl #16
-	orr		r3, r3, r6, lsl #24
-#endif
-	subs		r2, r2, #4
-	str		r3, [r12], #4
-	bne		1b
-	b		.Lcopy_block_done
-ENDPROC(blake2s_compress)
diff --git a/arch/arm/crypto/blake2s-glue.c b/arch/arm/crypto/blake2s-glue.c
deleted file mode 100644
index 0238a70d9581..000000000000
--- a/arch/arm/crypto/blake2s-glue.c
+++ /dev/null
@@ -1,7 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include <crypto/internal/blake2s.h>
-#include <linux/module.h>
-
-/* defined in blake2s-core.S */
-EXPORT_SYMBOL(blake2s_compress);
diff --git a/arch/arm/crypto/chacha-glue.c b/arch/arm/crypto/chacha-glue.c
deleted file mode 100644
index cdde8fd01f8f..000000000000
--- a/arch/arm/crypto/chacha-glue.c
+++ /dev/null
@@ -1,358 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ARM NEON accelerated ChaCha and XChaCha stream ciphers,
- * including ChaCha20 (RFC7539)
- *
- * Copyright (C) 2016-2019 Linaro, Ltd. <ard.biesheuvel@linaro.org>
- * Copyright (C) 2015 Martin Willi
- */
-
-#include <crypto/algapi.h>
-#include <crypto/internal/chacha.h>
-#include <crypto/internal/simd.h>
-#include <crypto/internal/skcipher.h>
-#include <linux/jump_label.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/cputype.h>
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-
-asmlinkage void chacha_block_xor_neon(const u32 *state, u8 *dst, const u8 *src,
-				      int nrounds);
-asmlinkage void chacha_4block_xor_neon(const u32 *state, u8 *dst, const u8 *src,
-				       int nrounds, unsigned int nbytes);
-asmlinkage void hchacha_block_arm(const u32 *state, u32 *out, int nrounds);
-asmlinkage void hchacha_block_neon(const u32 *state, u32 *out, int nrounds);
-
-asmlinkage void chacha_doarm(u8 *dst, const u8 *src, unsigned int bytes,
-			     const u32 *state, int nrounds);
-
-static __ro_after_init DEFINE_STATIC_KEY_FALSE(use_neon);
-
-static inline bool neon_usable(void)
-{
-	return static_branch_likely(&use_neon) && crypto_simd_usable();
-}
-
-static void chacha_doneon(u32 *state, u8 *dst, const u8 *src,
-			  unsigned int bytes, int nrounds)
-{
-	u8 buf[CHACHA_BLOCK_SIZE];
-
-	while (bytes > CHACHA_BLOCK_SIZE) {
-		unsigned int l = min(bytes, CHACHA_BLOCK_SIZE * 4U);
-
-		chacha_4block_xor_neon(state, dst, src, nrounds, l);
-		bytes -= l;
-		src += l;
-		dst += l;
-		state[12] += DIV_ROUND_UP(l, CHACHA_BLOCK_SIZE);
-	}
-	if (bytes) {
-		const u8 *s = src;
-		u8 *d = dst;
-
-		if (bytes != CHACHA_BLOCK_SIZE)
-			s = d = memcpy(buf, src, bytes);
-		chacha_block_xor_neon(state, d, s, nrounds);
-		if (d != dst)
-			memcpy(dst, buf, bytes);
-		state[12]++;
-	}
-}
-
-void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds)
-{
-	if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon_usable()) {
-		hchacha_block_arm(state, stream, nrounds);
-	} else {
-		kernel_neon_begin();
-		hchacha_block_neon(state, stream, nrounds);
-		kernel_neon_end();
-	}
-}
-EXPORT_SYMBOL(hchacha_block_arch);
-
-void chacha_init_arch(u32 *state, const u32 *key, const u8 *iv)
-{
-	chacha_init_generic(state, key, iv);
-}
-EXPORT_SYMBOL(chacha_init_arch);
-
-void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src, unsigned int bytes,
-		       int nrounds)
-{
-	if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon_usable() ||
-	    bytes <= CHACHA_BLOCK_SIZE) {
-		chacha_doarm(dst, src, bytes, state, nrounds);
-		state[12] += DIV_ROUND_UP(bytes, CHACHA_BLOCK_SIZE);
-		return;
-	}
-
-	do {
-		unsigned int todo = min_t(unsigned int, bytes, SZ_4K);
-
-		kernel_neon_begin();
-		chacha_doneon(state, dst, src, todo, nrounds);
-		kernel_neon_end();
-
-		bytes -= todo;
-		src += todo;
-		dst += todo;
-	} while (bytes);
-}
-EXPORT_SYMBOL(chacha_crypt_arch);
-
-static int chacha_stream_xor(struct skcipher_request *req,
-			     const struct chacha_ctx *ctx, const u8 *iv,
-			     bool neon)
-{
-	struct skcipher_walk walk;
-	u32 state[16];
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	chacha_init_generic(state, ctx->key, iv);
-
-	while (walk.nbytes > 0) {
-		unsigned int nbytes = walk.nbytes;
-
-		if (nbytes < walk.total)
-			nbytes = round_down(nbytes, walk.stride);
-
-		if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon) {
-			chacha_doarm(walk.dst.virt.addr, walk.src.virt.addr,
-				     nbytes, state, ctx->nrounds);
-			state[12] += DIV_ROUND_UP(nbytes, CHACHA_BLOCK_SIZE);
-		} else {
-			kernel_neon_begin();
-			chacha_doneon(state, walk.dst.virt.addr,
-				      walk.src.virt.addr, nbytes, ctx->nrounds);
-			kernel_neon_end();
-		}
-		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
-	}
-
-	return err;
-}
-
-static int do_chacha(struct skcipher_request *req, bool neon)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-
-	return chacha_stream_xor(req, ctx, req->iv, neon);
-}
-
-static int chacha_arm(struct skcipher_request *req)
-{
-	return do_chacha(req, false);
-}
-
-static int chacha_neon(struct skcipher_request *req)
-{
-	return do_chacha(req, neon_usable());
-}
-
-static int do_xchacha(struct skcipher_request *req, bool neon)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct chacha_ctx subctx;
-	u32 state[16];
-	u8 real_iv[16];
-
-	chacha_init_generic(state, ctx->key, req->iv);
-
-	if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon) {
-		hchacha_block_arm(state, subctx.key, ctx->nrounds);
-	} else {
-		kernel_neon_begin();
-		hchacha_block_neon(state, subctx.key, ctx->nrounds);
-		kernel_neon_end();
-	}
-	subctx.nrounds = ctx->nrounds;
-
-	memcpy(&real_iv[0], req->iv + 24, 8);
-	memcpy(&real_iv[8], req->iv + 16, 8);
-	return chacha_stream_xor(req, &subctx, real_iv, neon);
-}
-
-static int xchacha_arm(struct skcipher_request *req)
-{
-	return do_xchacha(req, false);
-}
-
-static int xchacha_neon(struct skcipher_request *req)
-{
-	return do_xchacha(req, neon_usable());
-}
-
-static struct skcipher_alg arm_algs[] = {
-	{
-		.base.cra_name		= "chacha20",
-		.base.cra_driver_name	= "chacha20-arm",
-		.base.cra_priority	= 200,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= CHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= chacha_arm,
-		.decrypt		= chacha_arm,
-	}, {
-		.base.cra_name		= "xchacha20",
-		.base.cra_driver_name	= "xchacha20-arm",
-		.base.cra_priority	= 200,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= xchacha_arm,
-		.decrypt		= xchacha_arm,
-	}, {
-		.base.cra_name		= "xchacha12",
-		.base.cra_driver_name	= "xchacha12-arm",
-		.base.cra_priority	= 200,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= chacha12_setkey,
-		.encrypt		= xchacha_arm,
-		.decrypt		= xchacha_arm,
-	},
-};
-
-static struct skcipher_alg neon_algs[] = {
-	{
-		.base.cra_name		= "chacha20",
-		.base.cra_driver_name	= "chacha20-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= CHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.walksize		= 4 * CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= chacha_neon,
-		.decrypt		= chacha_neon,
-	}, {
-		.base.cra_name		= "xchacha20",
-		.base.cra_driver_name	= "xchacha20-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.walksize		= 4 * CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= xchacha_neon,
-		.decrypt		= xchacha_neon,
-	}, {
-		.base.cra_name		= "xchacha12",
-		.base.cra_driver_name	= "xchacha12-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.walksize		= 4 * CHACHA_BLOCK_SIZE,
-		.setkey			= chacha12_setkey,
-		.encrypt		= xchacha_neon,
-		.decrypt		= xchacha_neon,
-	}
-};
-
-static int __init chacha_simd_mod_init(void)
-{
-	int err = 0;
-
-	if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER)) {
-		err = crypto_register_skciphers(arm_algs, ARRAY_SIZE(arm_algs));
-		if (err)
-			return err;
-	}
-
-	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON)) {
-		int i;
-
-		switch (read_cpuid_part()) {
-		case ARM_CPU_PART_CORTEX_A7:
-		case ARM_CPU_PART_CORTEX_A5:
-			/*
-			 * The Cortex-A7 and Cortex-A5 do not perform well with
-			 * the NEON implementation but do incredibly with the
-			 * scalar one and use less power.
-			 */
-			for (i = 0; i < ARRAY_SIZE(neon_algs); i++)
-				neon_algs[i].base.cra_priority = 0;
-			break;
-		default:
-			static_branch_enable(&use_neon);
-		}
-
-		if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER)) {
-			err = crypto_register_skciphers(neon_algs, ARRAY_SIZE(neon_algs));
-			if (err)
-				crypto_unregister_skciphers(arm_algs, ARRAY_SIZE(arm_algs));
-		}
-	}
-	return err;
-}
-
-static void __exit chacha_simd_mod_fini(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER)) {
-		crypto_unregister_skciphers(arm_algs, ARRAY_SIZE(arm_algs));
-		if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON))
-			crypto_unregister_skciphers(neon_algs, ARRAY_SIZE(neon_algs));
-	}
-}
-
-module_init(chacha_simd_mod_init);
-module_exit(chacha_simd_mod_fini);
-
-MODULE_DESCRIPTION("ChaCha and XChaCha stream ciphers (scalar and NEON accelerated)");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("chacha20");
-MODULE_ALIAS_CRYPTO("chacha20-arm");
-MODULE_ALIAS_CRYPTO("xchacha20");
-MODULE_ALIAS_CRYPTO("xchacha20-arm");
-MODULE_ALIAS_CRYPTO("xchacha12");
-MODULE_ALIAS_CRYPTO("xchacha12-arm");
-#ifdef CONFIG_KERNEL_MODE_NEON
-MODULE_ALIAS_CRYPTO("chacha20-neon");
-MODULE_ALIAS_CRYPTO("xchacha20-neon");
-MODULE_ALIAS_CRYPTO("xchacha12-neon");
-#endif
diff --git a/arch/arm/crypto/chacha-neon-core.S b/arch/arm/crypto/chacha-neon-core.S
deleted file mode 100644
index 13d12f672656..000000000000
--- a/arch/arm/crypto/chacha-neon-core.S
+++ /dev/null
@@ -1,643 +0,0 @@
-/*
- * ChaCha/XChaCha NEON helper functions
- *
- * Copyright (C) 2016 Linaro, Ltd. <ard.biesheuvel@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Based on:
- * ChaCha20 256-bit cipher algorithm, RFC7539, x64 SSE3 functions
- *
- * Copyright (C) 2015 Martin Willi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
- /*
-  * NEON doesn't have a rotate instruction.  The alternatives are, more or less:
-  *
-  * (a)  vshl.u32 + vsri.u32		(needs temporary register)
-  * (b)  vshl.u32 + vshr.u32 + vorr	(needs temporary register)
-  * (c)  vrev32.16			(16-bit rotations only)
-  * (d)  vtbl.8 + vtbl.8		(multiple of 8 bits rotations only,
-  *					 needs index vector)
-  *
-  * ChaCha has 16, 12, 8, and 7-bit rotations.  For the 12 and 7-bit rotations,
-  * the only choices are (a) and (b).  We use (a) since it takes two-thirds the
-  * cycles of (b) on both Cortex-A7 and Cortex-A53.
-  *
-  * For the 16-bit rotation, we use vrev32.16 since it's consistently fastest
-  * and doesn't need a temporary register.
-  *
-  * For the 8-bit rotation, we use vtbl.8 + vtbl.8.  On Cortex-A7, this sequence
-  * is twice as fast as (a), even when doing (a) on multiple registers
-  * simultaneously to eliminate the stall between vshl and vsri.  Also, it
-  * parallelizes better when temporary registers are scarce.
-  *
-  * A disadvantage is that on Cortex-A53, the vtbl sequence is the same speed as
-  * (a), so the need to load the rotation table actually makes the vtbl method
-  * slightly slower overall on that CPU (~1.3% slower ChaCha20).  Still, it
-  * seems to be a good compromise to get a more significant speed boost on some
-  * CPUs, e.g. ~4.8% faster ChaCha20 on Cortex-A7.
-  */
-
-#include <linux/linkage.h>
-#include <asm/cache.h>
-
-	.text
-	.fpu		neon
-	.align		5
-
-/*
- * chacha_permute - permute one block
- *
- * Permute one 64-byte block where the state matrix is stored in the four NEON
- * registers q0-q3.  It performs matrix operations on four words in parallel,
- * but requires shuffling to rearrange the words after each round.
- *
- * The round count is given in r3.
- *
- * Clobbers: r3, ip, q4-q5
- */
-chacha_permute:
-
-	adr		ip, .Lrol8_table
-	vld1.8		{d10}, [ip, :64]
-
-.Ldoubleround:
-	// x0 += x1, x3 = rotl32(x3 ^ x0, 16)
-	vadd.i32	q0, q0, q1
-	veor		q3, q3, q0
-	vrev32.16	q3, q3
-
-	// x2 += x3, x1 = rotl32(x1 ^ x2, 12)
-	vadd.i32	q2, q2, q3
-	veor		q4, q1, q2
-	vshl.u32	q1, q4, #12
-	vsri.u32	q1, q4, #20
-
-	// x0 += x1, x3 = rotl32(x3 ^ x0, 8)
-	vadd.i32	q0, q0, q1
-	veor		q3, q3, q0
-	vtbl.8		d6, {d6}, d10
-	vtbl.8		d7, {d7}, d10
-
-	// x2 += x3, x1 = rotl32(x1 ^ x2, 7)
-	vadd.i32	q2, q2, q3
-	veor		q4, q1, q2
-	vshl.u32	q1, q4, #7
-	vsri.u32	q1, q4, #25
-
-	// x1 = shuffle32(x1, MASK(0, 3, 2, 1))
-	vext.8		q1, q1, q1, #4
-	// x2 = shuffle32(x2, MASK(1, 0, 3, 2))
-	vext.8		q2, q2, q2, #8
-	// x3 = shuffle32(x3, MASK(2, 1, 0, 3))
-	vext.8		q3, q3, q3, #12
-
-	// x0 += x1, x3 = rotl32(x3 ^ x0, 16)
-	vadd.i32	q0, q0, q1
-	veor		q3, q3, q0
-	vrev32.16	q3, q3
-
-	// x2 += x3, x1 = rotl32(x1 ^ x2, 12)
-	vadd.i32	q2, q2, q3
-	veor		q4, q1, q2
-	vshl.u32	q1, q4, #12
-	vsri.u32	q1, q4, #20
-
-	// x0 += x1, x3 = rotl32(x3 ^ x0, 8)
-	vadd.i32	q0, q0, q1
-	veor		q3, q3, q0
-	vtbl.8		d6, {d6}, d10
-	vtbl.8		d7, {d7}, d10
-
-	// x2 += x3, x1 = rotl32(x1 ^ x2, 7)
-	vadd.i32	q2, q2, q3
-	veor		q4, q1, q2
-	vshl.u32	q1, q4, #7
-	vsri.u32	q1, q4, #25
-
-	// x1 = shuffle32(x1, MASK(2, 1, 0, 3))
-	vext.8		q1, q1, q1, #12
-	// x2 = shuffle32(x2, MASK(1, 0, 3, 2))
-	vext.8		q2, q2, q2, #8
-	// x3 = shuffle32(x3, MASK(0, 3, 2, 1))
-	vext.8		q3, q3, q3, #4
-
-	subs		r3, r3, #2
-	bne		.Ldoubleround
-
-	bx		lr
-ENDPROC(chacha_permute)
-
-ENTRY(chacha_block_xor_neon)
-	// r0: Input state matrix, s
-	// r1: 1 data block output, o
-	// r2: 1 data block input, i
-	// r3: nrounds
-	push		{lr}
-
-	// x0..3 = s0..3
-	add		ip, r0, #0x20
-	vld1.32		{q0-q1}, [r0]
-	vld1.32		{q2-q3}, [ip]
-
-	vmov		q8, q0
-	vmov		q9, q1
-	vmov		q10, q2
-	vmov		q11, q3
-
-	bl		chacha_permute
-
-	add		ip, r2, #0x20
-	vld1.8		{q4-q5}, [r2]
-	vld1.8		{q6-q7}, [ip]
-
-	// o0 = i0 ^ (x0 + s0)
-	vadd.i32	q0, q0, q8
-	veor		q0, q0, q4
-
-	// o1 = i1 ^ (x1 + s1)
-	vadd.i32	q1, q1, q9
-	veor		q1, q1, q5
-
-	// o2 = i2 ^ (x2 + s2)
-	vadd.i32	q2, q2, q10
-	veor		q2, q2, q6
-
-	// o3 = i3 ^ (x3 + s3)
-	vadd.i32	q3, q3, q11
-	veor		q3, q3, q7
-
-	add		ip, r1, #0x20
-	vst1.8		{q0-q1}, [r1]
-	vst1.8		{q2-q3}, [ip]
-
-	pop		{pc}
-ENDPROC(chacha_block_xor_neon)
-
-ENTRY(hchacha_block_neon)
-	// r0: Input state matrix, s
-	// r1: output (8 32-bit words)
-	// r2: nrounds
-	push		{lr}
-
-	vld1.32		{q0-q1}, [r0]!
-	vld1.32		{q2-q3}, [r0]
-
-	mov		r3, r2
-	bl		chacha_permute
-
-	vst1.32		{q0}, [r1]!
-	vst1.32		{q3}, [r1]
-
-	pop		{pc}
-ENDPROC(hchacha_block_neon)
-
-	.align		4
-.Lctrinc:	.word	0, 1, 2, 3
-.Lrol8_table:	.byte	3, 0, 1, 2, 7, 4, 5, 6
-
-	.align		5
-ENTRY(chacha_4block_xor_neon)
-	push		{r4, lr}
-	mov		r4, sp			// preserve the stack pointer
-	sub		ip, sp, #0x20		// allocate a 32 byte buffer
-	bic		ip, ip, #0x1f		// aligned to 32 bytes
-	mov		sp, ip
-
-	// r0: Input state matrix, s
-	// r1: 4 data blocks output, o
-	// r2: 4 data blocks input, i
-	// r3: nrounds
-
-	//
-	// This function encrypts four consecutive ChaCha blocks by loading
-	// the state matrix in NEON registers four times. The algorithm performs
-	// each operation on the corresponding word of each state matrix, hence
-	// requires no word shuffling. The words are re-interleaved before the
-	// final addition of the original state and the XORing step.
-	//
-
-	// x0..15[0-3] = s0..15[0-3]
-	add		ip, r0, #0x20
-	vld1.32		{q0-q1}, [r0]
-	vld1.32		{q2-q3}, [ip]
-
-	adr		lr, .Lctrinc
-	vdup.32		q15, d7[1]
-	vdup.32		q14, d7[0]
-	vld1.32		{q4}, [lr, :128]
-	vdup.32		q13, d6[1]
-	vdup.32		q12, d6[0]
-	vdup.32		q11, d5[1]
-	vdup.32		q10, d5[0]
-	vadd.u32	q12, q12, q4		// x12 += counter values 0-3
-	vdup.32		q9, d4[1]
-	vdup.32		q8, d4[0]
-	vdup.32		q7, d3[1]
-	vdup.32		q6, d3[0]
-	vdup.32		q5, d2[1]
-	vdup.32		q4, d2[0]
-	vdup.32		q3, d1[1]
-	vdup.32		q2, d1[0]
-	vdup.32		q1, d0[1]
-	vdup.32		q0, d0[0]
-
-	adr		ip, .Lrol8_table
-	b		1f
-
-.Ldoubleround4:
-	vld1.32		{q8-q9}, [sp, :256]
-1:
-	// x0 += x4, x12 = rotl32(x12 ^ x0, 16)
-	// x1 += x5, x13 = rotl32(x13 ^ x1, 16)
-	// x2 += x6, x14 = rotl32(x14 ^ x2, 16)
-	// x3 += x7, x15 = rotl32(x15 ^ x3, 16)
-	vadd.i32	q0, q0, q4
-	vadd.i32	q1, q1, q5
-	vadd.i32	q2, q2, q6
-	vadd.i32	q3, q3, q7
-
-	veor		q12, q12, q0
-	veor		q13, q13, q1
-	veor		q14, q14, q2
-	veor		q15, q15, q3
-
-	vrev32.16	q12, q12
-	vrev32.16	q13, q13
-	vrev32.16	q14, q14
-	vrev32.16	q15, q15
-
-	// x8 += x12, x4 = rotl32(x4 ^ x8, 12)
-	// x9 += x13, x5 = rotl32(x5 ^ x9, 12)
-	// x10 += x14, x6 = rotl32(x6 ^ x10, 12)
-	// x11 += x15, x7 = rotl32(x7 ^ x11, 12)
-	vadd.i32	q8, q8, q12
-	vadd.i32	q9, q9, q13
-	vadd.i32	q10, q10, q14
-	vadd.i32	q11, q11, q15
-
-	vst1.32		{q8-q9}, [sp, :256]
-
-	veor		q8, q4, q8
-	veor		q9, q5, q9
-	vshl.u32	q4, q8, #12
-	vshl.u32	q5, q9, #12
-	vsri.u32	q4, q8, #20
-	vsri.u32	q5, q9, #20
-
-	veor		q8, q6, q10
-	veor		q9, q7, q11
-	vshl.u32	q6, q8, #12
-	vshl.u32	q7, q9, #12
-	vsri.u32	q6, q8, #20
-	vsri.u32	q7, q9, #20
-
-	// x0 += x4, x12 = rotl32(x12 ^ x0, 8)
-	// x1 += x5, x13 = rotl32(x13 ^ x1, 8)
-	// x2 += x6, x14 = rotl32(x14 ^ x2, 8)
-	// x3 += x7, x15 = rotl32(x15 ^ x3, 8)
-	vld1.8		{d16}, [ip, :64]
-	vadd.i32	q0, q0, q4
-	vadd.i32	q1, q1, q5
-	vadd.i32	q2, q2, q6
-	vadd.i32	q3, q3, q7
-
-	veor		q12, q12, q0
-	veor		q13, q13, q1
-	veor		q14, q14, q2
-	veor		q15, q15, q3
-
-	vtbl.8		d24, {d24}, d16
-	vtbl.8		d25, {d25}, d16
-	vtbl.8		d26, {d26}, d16
-	vtbl.8		d27, {d27}, d16
-	vtbl.8		d28, {d28}, d16
-	vtbl.8		d29, {d29}, d16
-	vtbl.8		d30, {d30}, d16
-	vtbl.8		d31, {d31}, d16
-
-	vld1.32		{q8-q9}, [sp, :256]
-
-	// x8 += x12, x4 = rotl32(x4 ^ x8, 7)
-	// x9 += x13, x5 = rotl32(x5 ^ x9, 7)
-	// x10 += x14, x6 = rotl32(x6 ^ x10, 7)
-	// x11 += x15, x7 = rotl32(x7 ^ x11, 7)
-	vadd.i32	q8, q8, q12
-	vadd.i32	q9, q9, q13
-	vadd.i32	q10, q10, q14
-	vadd.i32	q11, q11, q15
-
-	vst1.32		{q8-q9}, [sp, :256]
-
-	veor		q8, q4, q8
-	veor		q9, q5, q9
-	vshl.u32	q4, q8, #7
-	vshl.u32	q5, q9, #7
-	vsri.u32	q4, q8, #25
-	vsri.u32	q5, q9, #25
-
-	veor		q8, q6, q10
-	veor		q9, q7, q11
-	vshl.u32	q6, q8, #7
-	vshl.u32	q7, q9, #7
-	vsri.u32	q6, q8, #25
-	vsri.u32	q7, q9, #25
-
-	vld1.32		{q8-q9}, [sp, :256]
-
-	// x0 += x5, x15 = rotl32(x15 ^ x0, 16)
-	// x1 += x6, x12 = rotl32(x12 ^ x1, 16)
-	// x2 += x7, x13 = rotl32(x13 ^ x2, 16)
-	// x3 += x4, x14 = rotl32(x14 ^ x3, 16)
-	vadd.i32	q0, q0, q5
-	vadd.i32	q1, q1, q6
-	vadd.i32	q2, q2, q7
-	vadd.i32	q3, q3, q4
-
-	veor		q15, q15, q0
-	veor		q12, q12, q1
-	veor		q13, q13, q2
-	veor		q14, q14, q3
-
-	vrev32.16	q15, q15
-	vrev32.16	q12, q12
-	vrev32.16	q13, q13
-	vrev32.16	q14, q14
-
-	// x10 += x15, x5 = rotl32(x5 ^ x10, 12)
-	// x11 += x12, x6 = rotl32(x6 ^ x11, 12)
-	// x8 += x13, x7 = rotl32(x7 ^ x8, 12)
-	// x9 += x14, x4 = rotl32(x4 ^ x9, 12)
-	vadd.i32	q10, q10, q15
-	vadd.i32	q11, q11, q12
-	vadd.i32	q8, q8, q13
-	vadd.i32	q9, q9, q14
-
-	vst1.32		{q8-q9}, [sp, :256]
-
-	veor		q8, q7, q8
-	veor		q9, q4, q9
-	vshl.u32	q7, q8, #12
-	vshl.u32	q4, q9, #12
-	vsri.u32	q7, q8, #20
-	vsri.u32	q4, q9, #20
-
-	veor		q8, q5, q10
-	veor		q9, q6, q11
-	vshl.u32	q5, q8, #12
-	vshl.u32	q6, q9, #12
-	vsri.u32	q5, q8, #20
-	vsri.u32	q6, q9, #20
-
-	// x0 += x5, x15 = rotl32(x15 ^ x0, 8)
-	// x1 += x6, x12 = rotl32(x12 ^ x1, 8)
-	// x2 += x7, x13 = rotl32(x13 ^ x2, 8)
-	// x3 += x4, x14 = rotl32(x14 ^ x3, 8)
-	vld1.8		{d16}, [ip, :64]
-	vadd.i32	q0, q0, q5
-	vadd.i32	q1, q1, q6
-	vadd.i32	q2, q2, q7
-	vadd.i32	q3, q3, q4
-
-	veor		q15, q15, q0
-	veor		q12, q12, q1
-	veor		q13, q13, q2
-	veor		q14, q14, q3
-
-	vtbl.8		d30, {d30}, d16
-	vtbl.8		d31, {d31}, d16
-	vtbl.8		d24, {d24}, d16
-	vtbl.8		d25, {d25}, d16
-	vtbl.8		d26, {d26}, d16
-	vtbl.8		d27, {d27}, d16
-	vtbl.8		d28, {d28}, d16
-	vtbl.8		d29, {d29}, d16
-
-	vld1.32		{q8-q9}, [sp, :256]
-
-	// x10 += x15, x5 = rotl32(x5 ^ x10, 7)
-	// x11 += x12, x6 = rotl32(x6 ^ x11, 7)
-	// x8 += x13, x7 = rotl32(x7 ^ x8, 7)
-	// x9 += x14, x4 = rotl32(x4 ^ x9, 7)
-	vadd.i32	q10, q10, q15
-	vadd.i32	q11, q11, q12
-	vadd.i32	q8, q8, q13
-	vadd.i32	q9, q9, q14
-
-	vst1.32		{q8-q9}, [sp, :256]
-
-	veor		q8, q7, q8
-	veor		q9, q4, q9
-	vshl.u32	q7, q8, #7
-	vshl.u32	q4, q9, #7
-	vsri.u32	q7, q8, #25
-	vsri.u32	q4, q9, #25
-
-	veor		q8, q5, q10
-	veor		q9, q6, q11
-	vshl.u32	q5, q8, #7
-	vshl.u32	q6, q9, #7
-	vsri.u32	q5, q8, #25
-	vsri.u32	q6, q9, #25
-
-	subs		r3, r3, #2
-	bne		.Ldoubleround4
-
-	// x0..7[0-3] are in q0-q7, x10..15[0-3] are in q10-q15.
-	// x8..9[0-3] are on the stack.
-
-	// Re-interleave the words in the first two rows of each block (x0..7).
-	// Also add the counter values 0-3 to x12[0-3].
-	  vld1.32	{q8}, [lr, :128]	// load counter values 0-3
-	vzip.32		q0, q1			// => (0 1 0 1) (0 1 0 1)
-	vzip.32		q2, q3			// => (2 3 2 3) (2 3 2 3)
-	vzip.32		q4, q5			// => (4 5 4 5) (4 5 4 5)
-	vzip.32		q6, q7			// => (6 7 6 7) (6 7 6 7)
-	  vadd.u32	q12, q8			// x12 += counter values 0-3
-	vswp		d1, d4
-	vswp		d3, d6
-	  vld1.32	{q8-q9}, [r0]!		// load s0..7
-	vswp		d9, d12
-	vswp		d11, d14
-
-	// Swap q1 and q4 so that we'll free up consecutive registers (q0-q1)
-	// after XORing the first 32 bytes.
-	vswp		q1, q4
-
-	// First two rows of each block are (q0 q1) (q2 q6) (q4 q5) (q3 q7)
-
-	// x0..3[0-3] += s0..3[0-3]	(add orig state to 1st row of each block)
-	vadd.u32	q0, q0, q8
-	vadd.u32	q2, q2, q8
-	vadd.u32	q4, q4, q8
-	vadd.u32	q3, q3, q8
-
-	// x4..7[0-3] += s4..7[0-3]	(add orig state to 2nd row of each block)
-	vadd.u32	q1, q1, q9
-	vadd.u32	q6, q6, q9
-	vadd.u32	q5, q5, q9
-	vadd.u32	q7, q7, q9
-
-	// XOR first 32 bytes using keystream from first two rows of first block
-	vld1.8		{q8-q9}, [r2]!
-	veor		q8, q8, q0
-	veor		q9, q9, q1
-	vst1.8		{q8-q9}, [r1]!
-
-	// Re-interleave the words in the last two rows of each block (x8..15).
-	vld1.32		{q8-q9}, [sp, :256]
-	  mov		sp, r4		// restore original stack pointer
-	  ldr		r4, [r4, #8]	// load number of bytes
-	vzip.32		q12, q13	// => (12 13 12 13) (12 13 12 13)
-	vzip.32		q14, q15	// => (14 15 14 15) (14 15 14 15)
-	vzip.32		q8, q9		// => (8 9 8 9) (8 9 8 9)
-	vzip.32		q10, q11	// => (10 11 10 11) (10 11 10 11)
-	  vld1.32	{q0-q1}, [r0]	// load s8..15
-	vswp		d25, d28
-	vswp		d27, d30
-	vswp		d17, d20
-	vswp		d19, d22
-
-	// Last two rows of each block are (q8 q12) (q10 q14) (q9 q13) (q11 q15)
-
-	// x8..11[0-3] += s8..11[0-3]	(add orig state to 3rd row of each block)
-	vadd.u32	q8,  q8,  q0
-	vadd.u32	q10, q10, q0
-	vadd.u32	q9,  q9,  q0
-	vadd.u32	q11, q11, q0
-
-	// x12..15[0-3] += s12..15[0-3] (add orig state to 4th row of each block)
-	vadd.u32	q12, q12, q1
-	vadd.u32	q14, q14, q1
-	vadd.u32	q13, q13, q1
-	vadd.u32	q15, q15, q1
-
-	// XOR the rest of the data with the keystream
-
-	vld1.8		{q0-q1}, [r2]!
-	subs		r4, r4, #96
-	veor		q0, q0, q8
-	veor		q1, q1, q12
-	ble		.Lle96
-	vst1.8		{q0-q1}, [r1]!
-
-	vld1.8		{q0-q1}, [r2]!
-	subs		r4, r4, #32
-	veor		q0, q0, q2
-	veor		q1, q1, q6
-	ble		.Lle128
-	vst1.8		{q0-q1}, [r1]!
-
-	vld1.8		{q0-q1}, [r2]!
-	subs		r4, r4, #32
-	veor		q0, q0, q10
-	veor		q1, q1, q14
-	ble		.Lle160
-	vst1.8		{q0-q1}, [r1]!
-
-	vld1.8		{q0-q1}, [r2]!
-	subs		r4, r4, #32
-	veor		q0, q0, q4
-	veor		q1, q1, q5
-	ble		.Lle192
-	vst1.8		{q0-q1}, [r1]!
-
-	vld1.8		{q0-q1}, [r2]!
-	subs		r4, r4, #32
-	veor		q0, q0, q9
-	veor		q1, q1, q13
-	ble		.Lle224
-	vst1.8		{q0-q1}, [r1]!
-
-	vld1.8		{q0-q1}, [r2]!
-	subs		r4, r4, #32
-	veor		q0, q0, q3
-	veor		q1, q1, q7
-	blt		.Llt256
-.Lout:
-	vst1.8		{q0-q1}, [r1]!
-
-	vld1.8		{q0-q1}, [r2]
-	veor		q0, q0, q11
-	veor		q1, q1, q15
-	vst1.8		{q0-q1}, [r1]
-
-	pop		{r4, pc}
-
-.Lle192:
-	vmov		q4, q9
-	vmov		q5, q13
-
-.Lle160:
-	// nothing to do
-
-.Lfinalblock:
-	// Process the final block if processing less than 4 full blocks.
-	// Entered with 32 bytes of ChaCha cipher stream in q4-q5, and the
-	// previous 32 byte output block that still needs to be written at
-	// [r1] in q0-q1.
-	beq		.Lfullblock
-
-.Lpartialblock:
-	adr		lr, .Lpermute + 32
-	add		r2, r2, r4
-	add		lr, lr, r4
-	add		r4, r4, r1
-
-	vld1.8		{q2-q3}, [lr]
-	vld1.8		{q6-q7}, [r2]
-
-	add		r4, r4, #32
-
-	vtbl.8		d4, {q4-q5}, d4
-	vtbl.8		d5, {q4-q5}, d5
-	vtbl.8		d6, {q4-q5}, d6
-	vtbl.8		d7, {q4-q5}, d7
-
-	veor		q6, q6, q2
-	veor		q7, q7, q3
-
-	vst1.8		{q6-q7}, [r4]	// overlapping stores
-	vst1.8		{q0-q1}, [r1]
-	pop		{r4, pc}
-
-.Lfullblock:
-	vmov		q11, q4
-	vmov		q15, q5
-	b		.Lout
-.Lle96:
-	vmov		q4, q2
-	vmov		q5, q6
-	b		.Lfinalblock
-.Lle128:
-	vmov		q4, q10
-	vmov		q5, q14
-	b		.Lfinalblock
-.Lle224:
-	vmov		q4, q3
-	vmov		q5, q7
-	b		.Lfinalblock
-.Llt256:
-	vmov		q4, q11
-	vmov		q5, q15
-	b		.Lpartialblock
-ENDPROC(chacha_4block_xor_neon)
-
-	.align		L1_CACHE_SHIFT
-.Lpermute:
-	.byte		0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
-	.byte		0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
-	.byte		0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17
-	.byte		0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f
-	.byte		0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
-	.byte		0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
-	.byte		0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17
-	.byte		0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f
diff --git a/arch/arm/crypto/chacha-scalar-core.S b/arch/arm/crypto/chacha-scalar-core.S
deleted file mode 100644
index 083fe1ab96d0..000000000000
--- a/arch/arm/crypto/chacha-scalar-core.S
+++ /dev/null
@@ -1,443 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2018 Google, Inc.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * Design notes:
- *
- * 16 registers would be needed to hold the state matrix, but only 14 are
- * available because 'sp' and 'pc' cannot be used.  So we spill the elements
- * (x8, x9) to the stack and swap them out with (x10, x11).  This adds one
- * 'ldrd' and one 'strd' instruction per round.
- *
- * All rotates are performed using the implicit rotate operand accepted by the
- * 'add' and 'eor' instructions.  This is faster than using explicit rotate
- * instructions.  To make this work, we allow the values in the second and last
- * rows of the ChaCha state matrix (rows 'b' and 'd') to temporarily have the
- * wrong rotation amount.  The rotation amount is then fixed up just in time
- * when the values are used.  'brot' is the number of bits the values in row 'b'
- * need to be rotated right to arrive at the correct values, and 'drot'
- * similarly for row 'd'.  (brot, drot) start out as (0, 0) but we make it such
- * that they end up as (25, 24) after every round.
- */
-
-	// ChaCha state registers
-	X0	.req	r0
-	X1	.req	r1
-	X2	.req	r2
-	X3	.req	r3
-	X4	.req	r4
-	X5	.req	r5
-	X6	.req	r6
-	X7	.req	r7
-	X8_X10	.req	r8	// shared by x8 and x10
-	X9_X11	.req	r9	// shared by x9 and x11
-	X12	.req	r10
-	X13	.req	r11
-	X14	.req	r12
-	X15	.req	r14
-
-.macro _le32_bswap_4x	a, b, c, d,  tmp
-#ifdef __ARMEB__
-	rev_l		\a,  \tmp
-	rev_l		\b,  \tmp
-	rev_l		\c,  \tmp
-	rev_l		\d,  \tmp
-#endif
-.endm
-
-.macro __ldrd		a, b, src, offset
-#if __LINUX_ARM_ARCH__ >= 6
-	ldrd		\a, \b, [\src, #\offset]
-#else
-	ldr		\a, [\src, #\offset]
-	ldr		\b, [\src, #\offset + 4]
-#endif
-.endm
-
-.macro __strd		a, b, dst, offset
-#if __LINUX_ARM_ARCH__ >= 6
-	strd		\a, \b, [\dst, #\offset]
-#else
-	str		\a, [\dst, #\offset]
-	str		\b, [\dst, #\offset + 4]
-#endif
-.endm
-
-.macro _halfround	a1, b1, c1, d1,  a2, b2, c2, d2
-
-	// a += b; d ^= a; d = rol(d, 16);
-	add		\a1, \a1, \b1, ror #brot
-	add		\a2, \a2, \b2, ror #brot
-	eor		\d1, \a1, \d1, ror #drot
-	eor		\d2, \a2, \d2, ror #drot
-	// drot == 32 - 16 == 16
-
-	// c += d; b ^= c; b = rol(b, 12);
-	add		\c1, \c1, \d1, ror #16
-	add		\c2, \c2, \d2, ror #16
-	eor		\b1, \c1, \b1, ror #brot
-	eor		\b2, \c2, \b2, ror #brot
-	// brot == 32 - 12 == 20
-
-	// a += b; d ^= a; d = rol(d, 8);
-	add		\a1, \a1, \b1, ror #20
-	add		\a2, \a2, \b2, ror #20
-	eor		\d1, \a1, \d1, ror #16
-	eor		\d2, \a2, \d2, ror #16
-	// drot == 32 - 8 == 24
-
-	// c += d; b ^= c; b = rol(b, 7);
-	add		\c1, \c1, \d1, ror #24
-	add		\c2, \c2, \d2, ror #24
-	eor		\b1, \c1, \b1, ror #20
-	eor		\b2, \c2, \b2, ror #20
-	// brot == 32 - 7 == 25
-.endm
-
-.macro _doubleround
-
-	// column round
-
-	// quarterrounds: (x0, x4, x8, x12) and (x1, x5, x9, x13)
-	_halfround	X0, X4, X8_X10, X12,  X1, X5, X9_X11, X13
-
-	// save (x8, x9); restore (x10, x11)
-	__strd		X8_X10, X9_X11, sp, 0
-	__ldrd		X8_X10, X9_X11, sp, 8
-
-	// quarterrounds: (x2, x6, x10, x14) and (x3, x7, x11, x15)
-	_halfround	X2, X6, X8_X10, X14,  X3, X7, X9_X11, X15
-
-	.set brot, 25
-	.set drot, 24
-
-	// diagonal round
-
-	// quarterrounds: (x0, x5, x10, x15) and (x1, x6, x11, x12)
-	_halfround	X0, X5, X8_X10, X15,  X1, X6, X9_X11, X12
-
-	// save (x10, x11); restore (x8, x9)
-	__strd		X8_X10, X9_X11, sp, 8
-	__ldrd		X8_X10, X9_X11, sp, 0
-
-	// quarterrounds: (x2, x7, x8, x13) and (x3, x4, x9, x14)
-	_halfround	X2, X7, X8_X10, X13,  X3, X4, X9_X11, X14
-.endm
-
-.macro _chacha_permute	nrounds
-	.set brot, 0
-	.set drot, 0
-	.rept \nrounds / 2
-	 _doubleround
-	.endr
-.endm
-
-.macro _chacha		nrounds
-
-.Lnext_block\@:
-	// Stack: unused0-unused1 x10-x11 x0-x15 OUT IN LEN
-	// Registers contain x0-x9,x12-x15.
-
-	// Do the core ChaCha permutation to update x0-x15.
-	_chacha_permute	\nrounds
-
-	add		sp, #8
-	// Stack: x10-x11 orig_x0-orig_x15 OUT IN LEN
-	// Registers contain x0-x9,x12-x15.
-	// x4-x7 are rotated by 'brot'; x12-x15 are rotated by 'drot'.
-
-	// Free up some registers (r8-r12,r14) by pushing (x8-x9,x12-x15).
-	push		{X8_X10, X9_X11, X12, X13, X14, X15}
-
-	// Load (OUT, IN, LEN).
-	ldr		r14, [sp, #96]
-	ldr		r12, [sp, #100]
-	ldr		r11, [sp, #104]
-
-	orr		r10, r14, r12
-
-	// Use slow path if fewer than 64 bytes remain.
-	cmp		r11, #64
-	blt		.Lxor_slowpath\@
-
-	// Use slow path if IN and/or OUT isn't 4-byte aligned.  Needed even on
-	// ARMv6+, since ldmia and stmia (used below) still require alignment.
-	tst		r10, #3
-	bne		.Lxor_slowpath\@
-
-	// Fast path: XOR 64 bytes of aligned data.
-
-	// Stack: x8-x9 x12-x15 x10-x11 orig_x0-orig_x15 OUT IN LEN
-	// Registers: r0-r7 are x0-x7; r8-r11 are free; r12 is IN; r14 is OUT.
-	// x4-x7 are rotated by 'brot'; x12-x15 are rotated by 'drot'.
-
-	// x0-x3
-	__ldrd		r8, r9, sp, 32
-	__ldrd		r10, r11, sp, 40
-	add		X0, X0, r8
-	add		X1, X1, r9
-	add		X2, X2, r10
-	add		X3, X3, r11
-	_le32_bswap_4x	X0, X1, X2, X3,  r8
-	ldmia		r12!, {r8-r11}
-	eor		X0, X0, r8
-	eor		X1, X1, r9
-	eor		X2, X2, r10
-	eor		X3, X3, r11
-	stmia		r14!, {X0-X3}
-
-	// x4-x7
-	__ldrd		r8, r9, sp, 48
-	__ldrd		r10, r11, sp, 56
-	add		X4, r8, X4, ror #brot
-	add		X5, r9, X5, ror #brot
-	ldmia		r12!, {X0-X3}
-	add		X6, r10, X6, ror #brot
-	add		X7, r11, X7, ror #brot
-	_le32_bswap_4x	X4, X5, X6, X7,  r8
-	eor		X4, X4, X0
-	eor		X5, X5, X1
-	eor		X6, X6, X2
-	eor		X7, X7, X3
-	stmia		r14!, {X4-X7}
-
-	// x8-x15
-	pop		{r0-r7}			// (x8-x9,x12-x15,x10-x11)
-	__ldrd		r8, r9, sp, 32
-	__ldrd		r10, r11, sp, 40
-	add		r0, r0, r8		// x8
-	add		r1, r1, r9		// x9
-	add		r6, r6, r10		// x10
-	add		r7, r7, r11		// x11
-	_le32_bswap_4x	r0, r1, r6, r7,  r8
-	ldmia		r12!, {r8-r11}
-	eor		r0, r0, r8		// x8
-	eor		r1, r1, r9		// x9
-	eor		r6, r6, r10		// x10
-	eor		r7, r7, r11		// x11
-	stmia		r14!, {r0,r1,r6,r7}
-	ldmia		r12!, {r0,r1,r6,r7}
-	__ldrd		r8, r9, sp, 48
-	__ldrd		r10, r11, sp, 56
-	add		r2, r8, r2, ror #drot	// x12
-	add		r3, r9, r3, ror #drot	// x13
-	add		r4, r10, r4, ror #drot	// x14
-	add		r5, r11, r5, ror #drot	// x15
-	_le32_bswap_4x	r2, r3, r4, r5,  r9
-	  ldr		r9, [sp, #72]		// load LEN
-	eor		r2, r2, r0		// x12
-	eor		r3, r3, r1		// x13
-	eor		r4, r4, r6		// x14
-	eor		r5, r5, r7		// x15
-	  subs		r9, #64			// decrement and check LEN
-	stmia		r14!, {r2-r5}
-
-	beq		.Ldone\@
-
-.Lprepare_for_next_block\@:
-
-	// Stack: x0-x15 OUT IN LEN
-
-	// Increment block counter (x12)
-	add		r8, #1
-
-	// Store updated (OUT, IN, LEN)
-	str		r14, [sp, #64]
-	str		r12, [sp, #68]
-	str		r9, [sp, #72]
-
-	  mov		r14, sp
-
-	// Store updated block counter (x12)
-	str		r8, [sp, #48]
-
-	  sub		sp, #16
-
-	// Reload state and do next block
-	ldmia		r14!, {r0-r11}		// load x0-x11
-	__strd		r10, r11, sp, 8		// store x10-x11 before state
-	ldmia		r14, {r10-r12,r14}	// load x12-x15
-	b		.Lnext_block\@
-
-.Lxor_slowpath\@:
-	// Slow path: < 64 bytes remaining, or unaligned input or output buffer.
-	// We handle it by storing the 64 bytes of keystream to the stack, then
-	// XOR-ing the needed portion with the data.
-
-	// Allocate keystream buffer
-	sub		sp, #64
-	mov		r14, sp
-
-	// Stack: ks0-ks15 x8-x9 x12-x15 x10-x11 orig_x0-orig_x15 OUT IN LEN
-	// Registers: r0-r7 are x0-x7; r8-r11 are free; r12 is IN; r14 is &ks0.
-	// x4-x7 are rotated by 'brot'; x12-x15 are rotated by 'drot'.
-
-	// Save keystream for x0-x3
-	__ldrd		r8, r9, sp, 96
-	__ldrd		r10, r11, sp, 104
-	add		X0, X0, r8
-	add		X1, X1, r9
-	add		X2, X2, r10
-	add		X3, X3, r11
-	_le32_bswap_4x	X0, X1, X2, X3,  r8
-	stmia		r14!, {X0-X3}
-
-	// Save keystream for x4-x7
-	__ldrd		r8, r9, sp, 112
-	__ldrd		r10, r11, sp, 120
-	add		X4, r8, X4, ror #brot
-	add		X5, r9, X5, ror #brot
-	add		X6, r10, X6, ror #brot
-	add		X7, r11, X7, ror #brot
-	_le32_bswap_4x	X4, X5, X6, X7,  r8
-	  add		r8, sp, #64
-	stmia		r14!, {X4-X7}
-
-	// Save keystream for x8-x15
-	ldm		r8, {r0-r7}		// (x8-x9,x12-x15,x10-x11)
-	__ldrd		r8, r9, sp, 128
-	__ldrd		r10, r11, sp, 136
-	add		r0, r0, r8		// x8
-	add		r1, r1, r9		// x9
-	add		r6, r6, r10		// x10
-	add		r7, r7, r11		// x11
-	_le32_bswap_4x	r0, r1, r6, r7,  r8
-	stmia		r14!, {r0,r1,r6,r7}
-	__ldrd		r8, r9, sp, 144
-	__ldrd		r10, r11, sp, 152
-	add		r2, r8, r2, ror #drot	// x12
-	add		r3, r9, r3, ror #drot	// x13
-	add		r4, r10, r4, ror #drot	// x14
-	add		r5, r11, r5, ror #drot	// x15
-	_le32_bswap_4x	r2, r3, r4, r5,  r9
-	stmia		r14, {r2-r5}
-
-	// Stack: ks0-ks15 unused0-unused7 x0-x15 OUT IN LEN
-	// Registers: r8 is block counter, r12 is IN.
-
-	ldr		r9, [sp, #168]		// LEN
-	ldr		r14, [sp, #160]		// OUT
-	cmp		r9, #64
-	  mov		r0, sp
-	movle		r1, r9
-	movgt		r1, #64
-	// r1 is number of bytes to XOR, in range [1, 64]
-
-.if __LINUX_ARM_ARCH__ < 6
-	orr		r2, r12, r14
-	tst		r2, #3			// IN or OUT misaligned?
-	bne		.Lxor_next_byte\@
-.endif
-
-	// XOR a word at a time
-.rept 16
-	subs		r1, #4
-	blt		.Lxor_words_done\@
-	ldr		r2, [r12], #4
-	ldr		r3, [r0], #4
-	eor		r2, r2, r3
-	str		r2, [r14], #4
-.endr
-	b		.Lxor_slowpath_done\@
-.Lxor_words_done\@:
-	ands		r1, r1, #3
-	beq		.Lxor_slowpath_done\@
-
-	// XOR a byte at a time
-.Lxor_next_byte\@:
-	ldrb		r2, [r12], #1
-	ldrb		r3, [r0], #1
-	eor		r2, r2, r3
-	strb		r2, [r14], #1
-	subs		r1, #1
-	bne		.Lxor_next_byte\@
-
-.Lxor_slowpath_done\@:
-	subs		r9, #64
-	add		sp, #96
-	bgt		.Lprepare_for_next_block\@
-
-.Ldone\@:
-.endm	// _chacha
-
-/*
- * void chacha_doarm(u8 *dst, const u8 *src, unsigned int bytes,
- *		     const u32 *state, int nrounds);
- */
-ENTRY(chacha_doarm)
-	cmp		r2, #0			// len == 0?
-	reteq		lr
-
-	ldr		ip, [sp]
-	cmp		ip, #12
-
-	push		{r0-r2,r4-r11,lr}
-
-	// Push state x0-x15 onto stack.
-	// Also store an extra copy of x10-x11 just before the state.
-
-	add		X12, r3, #48
-	ldm		X12, {X12,X13,X14,X15}
-	push		{X12,X13,X14,X15}
-	sub		sp, sp, #64
-
-	__ldrd		X8_X10, X9_X11, r3, 40
-	__strd		X8_X10, X9_X11, sp, 8
-	__strd		X8_X10, X9_X11, sp, 56
-	ldm		r3, {X0-X9_X11}
-	__strd		X0, X1, sp, 16
-	__strd		X2, X3, sp, 24
-	__strd		X4, X5, sp, 32
-	__strd		X6, X7, sp, 40
-	__strd		X8_X10, X9_X11, sp, 48
-
-	beq		1f
-	_chacha		20
-
-0:	add		sp, #76
-	pop		{r4-r11, pc}
-
-1:	_chacha		12
-	b		0b
-ENDPROC(chacha_doarm)
-
-/*
- * void hchacha_block_arm(const u32 state[16], u32 out[8], int nrounds);
- */
-ENTRY(hchacha_block_arm)
-	push		{r1,r4-r11,lr}
-
-	cmp		r2, #12			// ChaCha12 ?
-
-	mov		r14, r0
-	ldmia		r14!, {r0-r11}		// load x0-x11
-	push		{r10-r11}		// store x10-x11 to stack
-	ldm		r14, {r10-r12,r14}	// load x12-x15
-	sub		sp, #8
-
-	beq		1f
-	_chacha_permute	20
-
-	// Skip over (unused0-unused1, x10-x11)
-0:	add		sp, #16
-
-	// Fix up rotations of x12-x15
-	ror		X12, X12, #drot
-	ror		X13, X13, #drot
-	  pop		{r4}			// load 'out'
-	ror		X14, X14, #drot
-	ror		X15, X15, #drot
-
-	// Store (x0-x3,x12-x15) to 'out'
-	stm		r4, {X0,X1,X2,X3,X12,X13,X14,X15}
-
-	pop		{r4-r11,pc}
-
-1:	_chacha_permute	12
-	b		0b
-ENDPROC(hchacha_block_arm)
diff --git a/arch/arm/crypto/crc32-ce-core.S b/arch/arm/crypto/crc32-ce-core.S
deleted file mode 100644
index 3f13a76b9066..000000000000
--- a/arch/arm/crypto/crc32-ce-core.S
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Accelerated CRC32(C) using ARM CRC, NEON and Crypto Extensions instructions
- *
- * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* GPL HEADER START
- *
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 only,
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License version 2 for more details (a copy is included
- * in the LICENSE file that accompanied this code).
- *
- * You should have received a copy of the GNU General Public License
- * version 2 along with this program; If not, see http://www.gnu.org/licenses
- *
- * Please  visit http://www.xyratex.com/contact if you need additional
- * information or have any questions.
- *
- * GPL HEADER END
- */
-
-/*
- * Copyright 2012 Xyratex Technology Limited
- *
- * Using hardware provided PCLMULQDQ instruction to accelerate the CRC32
- * calculation.
- * CRC32 polynomial:0x04c11db7(BE)/0xEDB88320(LE)
- * PCLMULQDQ is a new instruction in Intel SSE4.2, the reference can be found
- * at:
- * https://www.intel.com/products/processor/manuals/
- * Intel(R) 64 and IA-32 Architectures Software Developer's Manual
- * Volume 2B: Instruction Set Reference, N-Z
- *
- * Authors:   Gregory Prestas <Gregory_Prestas@us.xyratex.com>
- *	      Alexander Boyko <Alexander_Boyko@xyratex.com>
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-	.text
-	.align		6
-	.arch		armv8-a
-	.arch_extension	crc
-	.fpu		crypto-neon-fp-armv8
-
-.Lcrc32_constants:
-	/*
-	 * [x4*128+32 mod P(x) << 32)]'  << 1   = 0x154442bd4
-	 * #define CONSTANT_R1  0x154442bd4LL
-	 *
-	 * [(x4*128-32 mod P(x) << 32)]' << 1   = 0x1c6e41596
-	 * #define CONSTANT_R2  0x1c6e41596LL
-	 */
-	.quad		0x0000000154442bd4
-	.quad		0x00000001c6e41596
-
-	/*
-	 * [(x128+32 mod P(x) << 32)]'   << 1   = 0x1751997d0
-	 * #define CONSTANT_R3  0x1751997d0LL
-	 *
-	 * [(x128-32 mod P(x) << 32)]'   << 1   = 0x0ccaa009e
-	 * #define CONSTANT_R4  0x0ccaa009eLL
-	 */
-	.quad		0x00000001751997d0
-	.quad		0x00000000ccaa009e
-
-	/*
-	 * [(x64 mod P(x) << 32)]'       << 1   = 0x163cd6124
-	 * #define CONSTANT_R5  0x163cd6124LL
-	 */
-	.quad		0x0000000163cd6124
-	.quad		0x00000000FFFFFFFF
-
-	/*
-	 * #define CRCPOLY_TRUE_LE_FULL 0x1DB710641LL
-	 *
-	 * Barrett Reduction constant (u64`) = u` = (x**64 / P(x))`
-	 *                                                      = 0x1F7011641LL
-	 * #define CONSTANT_RU  0x1F7011641LL
-	 */
-	.quad		0x00000001DB710641
-	.quad		0x00000001F7011641
-
-.Lcrc32c_constants:
-	.quad		0x00000000740eef02
-	.quad		0x000000009e4addf8
-	.quad		0x00000000f20c0dfe
-	.quad		0x000000014cd00bd6
-	.quad		0x00000000dd45aab8
-	.quad		0x00000000FFFFFFFF
-	.quad		0x0000000105ec76f0
-	.quad		0x00000000dea713f1
-
-	dCONSTANTl	.req	d0
-	dCONSTANTh	.req	d1
-	qCONSTANT	.req	q0
-
-	BUF		.req	r0
-	LEN		.req	r1
-	CRC		.req	r2
-
-	qzr		.req	q9
-
-	/**
-	 * Calculate crc32
-	 * BUF - buffer
-	 * LEN - sizeof buffer (multiple of 16 bytes), LEN should be > 63
-	 * CRC - initial crc32
-	 * return %eax crc32
-	 * uint crc32_pmull_le(unsigned char const *buffer,
-	 *                     size_t len, uint crc32)
-	 */
-ENTRY(crc32_pmull_le)
-	adr		r3, .Lcrc32_constants
-	b		0f
-
-ENTRY(crc32c_pmull_le)
-	adr		r3, .Lcrc32c_constants
-
-0:	bic		LEN, LEN, #15
-	vld1.8		{q1-q2}, [BUF, :128]!
-	vld1.8		{q3-q4}, [BUF, :128]!
-	vmov.i8		qzr, #0
-	vmov.i8		qCONSTANT, #0
-	vmov.32		dCONSTANTl[0], CRC
-	veor.8		d2, d2, dCONSTANTl
-	sub		LEN, LEN, #0x40
-	cmp		LEN, #0x40
-	blt		less_64
-
-	vld1.64		{qCONSTANT}, [r3]
-
-loop_64:		/* 64 bytes Full cache line folding */
-	sub		LEN, LEN, #0x40
-
-	vmull.p64	q5, d3, dCONSTANTh
-	vmull.p64	q6, d5, dCONSTANTh
-	vmull.p64	q7, d7, dCONSTANTh
-	vmull.p64	q8, d9, dCONSTANTh
-
-	vmull.p64	q1, d2, dCONSTANTl
-	vmull.p64	q2, d4, dCONSTANTl
-	vmull.p64	q3, d6, dCONSTANTl
-	vmull.p64	q4, d8, dCONSTANTl
-
-	veor.8		q1, q1, q5
-	vld1.8		{q5}, [BUF, :128]!
-	veor.8		q2, q2, q6
-	vld1.8		{q6}, [BUF, :128]!
-	veor.8		q3, q3, q7
-	vld1.8		{q7}, [BUF, :128]!
-	veor.8		q4, q4, q8
-	vld1.8		{q8}, [BUF, :128]!
-
-	veor.8		q1, q1, q5
-	veor.8		q2, q2, q6
-	veor.8		q3, q3, q7
-	veor.8		q4, q4, q8
-
-	cmp		LEN, #0x40
-	bge		loop_64
-
-less_64:		/* Folding cache line into 128bit */
-	vldr		dCONSTANTl, [r3, #16]
-	vldr		dCONSTANTh, [r3, #24]
-
-	vmull.p64	q5, d3, dCONSTANTh
-	vmull.p64	q1, d2, dCONSTANTl
-	veor.8		q1, q1, q5
-	veor.8		q1, q1, q2
-
-	vmull.p64	q5, d3, dCONSTANTh
-	vmull.p64	q1, d2, dCONSTANTl
-	veor.8		q1, q1, q5
-	veor.8		q1, q1, q3
-
-	vmull.p64	q5, d3, dCONSTANTh
-	vmull.p64	q1, d2, dCONSTANTl
-	veor.8		q1, q1, q5
-	veor.8		q1, q1, q4
-
-	teq		LEN, #0
-	beq		fold_64
-
-loop_16:		/* Folding rest buffer into 128bit */
-	subs		LEN, LEN, #0x10
-
-	vld1.8		{q2}, [BUF, :128]!
-	vmull.p64	q5, d3, dCONSTANTh
-	vmull.p64	q1, d2, dCONSTANTl
-	veor.8		q1, q1, q5
-	veor.8		q1, q1, q2
-
-	bne		loop_16
-
-fold_64:
-	/* perform the last 64 bit fold, also adds 32 zeroes
-	 * to the input stream */
-	vmull.p64	q2, d2, dCONSTANTh
-	vext.8		q1, q1, qzr, #8
-	veor.8		q1, q1, q2
-
-	/* final 32-bit fold */
-	vldr		dCONSTANTl, [r3, #32]
-	vldr		d6, [r3, #40]
-	vmov.i8		d7, #0
-
-	vext.8		q2, q1, qzr, #4
-	vand.8		d2, d2, d6
-	vmull.p64	q1, d2, dCONSTANTl
-	veor.8		q1, q1, q2
-
-	/* Finish up with the bit-reversed barrett reduction 64 ==> 32 bits */
-	vldr		dCONSTANTl, [r3, #48]
-	vldr		dCONSTANTh, [r3, #56]
-
-	vand.8		q2, q1, q3
-	vext.8		q2, qzr, q2, #8
-	vmull.p64	q2, d5, dCONSTANTh
-	vand.8		q2, q2, q3
-	vmull.p64	q2, d4, dCONSTANTl
-	veor.8		q1, q1, q2
-	vmov		r0, s5
-
-	bx		lr
-ENDPROC(crc32_pmull_le)
-ENDPROC(crc32c_pmull_le)
-
-	.macro		__crc32, c
-	subs		ip, r2, #8
-	bmi		.Ltail\c
-
-	tst		r1, #3
-	bne		.Lunaligned\c
-
-	teq		ip, #0
-.Laligned8\c:
-	ldrd		r2, r3, [r1], #8
-ARM_BE8(rev		r2, r2		)
-ARM_BE8(rev		r3, r3		)
-	crc32\c\()w	r0, r0, r2
-	crc32\c\()w	r0, r0, r3
-	bxeq		lr
-	subs		ip, ip, #8
-	bpl		.Laligned8\c
-
-.Ltail\c:
-	tst		ip, #4
-	beq		2f
-	ldr		r3, [r1], #4
-ARM_BE8(rev		r3, r3		)
-	crc32\c\()w	r0, r0, r3
-
-2:	tst		ip, #2
-	beq		1f
-	ldrh		r3, [r1], #2
-ARM_BE8(rev16		r3, r3		)
-	crc32\c\()h	r0, r0, r3
-
-1:	tst		ip, #1
-	bxeq		lr
-	ldrb		r3, [r1]
-	crc32\c\()b	r0, r0, r3
-	bx		lr
-
-.Lunaligned\c:
-	tst		r1, #1
-	beq		2f
-	ldrb		r3, [r1], #1
-	subs		r2, r2, #1
-	crc32\c\()b	r0, r0, r3
-
-	tst		r1, #2
-	beq		0f
-2:	ldrh		r3, [r1], #2
-	subs		r2, r2, #2
-ARM_BE8(rev16		r3, r3		)
-	crc32\c\()h	r0, r0, r3
-
-0:	subs		ip, r2, #8
-	bpl		.Laligned8\c
-	b		.Ltail\c
-	.endm
-
-	.align		5
-ENTRY(crc32_armv8_le)
-	__crc32
-ENDPROC(crc32_armv8_le)
-
-	.align		5
-ENTRY(crc32c_armv8_le)
-	__crc32		c
-ENDPROC(crc32c_armv8_le)
diff --git a/arch/arm/crypto/crc32-ce-glue.c b/arch/arm/crypto/crc32-ce-glue.c
deleted file mode 100644
index 2208445808d7..000000000000
--- a/arch/arm/crypto/crc32-ce-glue.c
+++ /dev/null
@@ -1,246 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Accelerated CRC32(C) using ARM CRC, NEON and Crypto Extensions instructions
- *
- * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <linux/cpufeature.h>
-#include <linux/crc32.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <asm/unaligned.h>
-
-#define PMULL_MIN_LEN		64L	/* minimum size of buffer
-					 * for crc32_pmull_le_16 */
-#define SCALE_F			16L	/* size of NEON register */
-
-asmlinkage u32 crc32_pmull_le(const u8 buf[], u32 len, u32 init_crc);
-asmlinkage u32 crc32_armv8_le(u32 init_crc, const u8 buf[], u32 len);
-
-asmlinkage u32 crc32c_pmull_le(const u8 buf[], u32 len, u32 init_crc);
-asmlinkage u32 crc32c_armv8_le(u32 init_crc, const u8 buf[], u32 len);
-
-static u32 (*fallback_crc32)(u32 init_crc, const u8 buf[], u32 len);
-static u32 (*fallback_crc32c)(u32 init_crc, const u8 buf[], u32 len);
-
-static int crc32_cra_init(struct crypto_tfm *tfm)
-{
-	u32 *key = crypto_tfm_ctx(tfm);
-
-	*key = 0;
-	return 0;
-}
-
-static int crc32c_cra_init(struct crypto_tfm *tfm)
-{
-	u32 *key = crypto_tfm_ctx(tfm);
-
-	*key = ~0;
-	return 0;
-}
-
-static int crc32_setkey(struct crypto_shash *hash, const u8 *key,
-			unsigned int keylen)
-{
-	u32 *mctx = crypto_shash_ctx(hash);
-
-	if (keylen != sizeof(u32))
-		return -EINVAL;
-	*mctx = le32_to_cpup((__le32 *)key);
-	return 0;
-}
-
-static int crc32_init(struct shash_desc *desc)
-{
-	u32 *mctx = crypto_shash_ctx(desc->tfm);
-	u32 *crc = shash_desc_ctx(desc);
-
-	*crc = *mctx;
-	return 0;
-}
-
-static int crc32_update(struct shash_desc *desc, const u8 *data,
-			unsigned int length)
-{
-	u32 *crc = shash_desc_ctx(desc);
-
-	*crc = crc32_armv8_le(*crc, data, length);
-	return 0;
-}
-
-static int crc32c_update(struct shash_desc *desc, const u8 *data,
-			 unsigned int length)
-{
-	u32 *crc = shash_desc_ctx(desc);
-
-	*crc = crc32c_armv8_le(*crc, data, length);
-	return 0;
-}
-
-static int crc32_final(struct shash_desc *desc, u8 *out)
-{
-	u32 *crc = shash_desc_ctx(desc);
-
-	put_unaligned_le32(*crc, out);
-	return 0;
-}
-
-static int crc32c_final(struct shash_desc *desc, u8 *out)
-{
-	u32 *crc = shash_desc_ctx(desc);
-
-	put_unaligned_le32(~*crc, out);
-	return 0;
-}
-
-static int crc32_pmull_update(struct shash_desc *desc, const u8 *data,
-			      unsigned int length)
-{
-	u32 *crc = shash_desc_ctx(desc);
-	unsigned int l;
-
-	if (crypto_simd_usable()) {
-		if ((u32)data % SCALE_F) {
-			l = min_t(u32, length, SCALE_F - ((u32)data % SCALE_F));
-
-			*crc = fallback_crc32(*crc, data, l);
-
-			data += l;
-			length -= l;
-		}
-
-		if (length >= PMULL_MIN_LEN) {
-			l = round_down(length, SCALE_F);
-
-			kernel_neon_begin();
-			*crc = crc32_pmull_le(data, l, *crc);
-			kernel_neon_end();
-
-			data += l;
-			length -= l;
-		}
-	}
-
-	if (length > 0)
-		*crc = fallback_crc32(*crc, data, length);
-
-	return 0;
-}
-
-static int crc32c_pmull_update(struct shash_desc *desc, const u8 *data,
-			       unsigned int length)
-{
-	u32 *crc = shash_desc_ctx(desc);
-	unsigned int l;
-
-	if (crypto_simd_usable()) {
-		if ((u32)data % SCALE_F) {
-			l = min_t(u32, length, SCALE_F - ((u32)data % SCALE_F));
-
-			*crc = fallback_crc32c(*crc, data, l);
-
-			data += l;
-			length -= l;
-		}
-
-		if (length >= PMULL_MIN_LEN) {
-			l = round_down(length, SCALE_F);
-
-			kernel_neon_begin();
-			*crc = crc32c_pmull_le(data, l, *crc);
-			kernel_neon_end();
-
-			data += l;
-			length -= l;
-		}
-	}
-
-	if (length > 0)
-		*crc = fallback_crc32c(*crc, data, length);
-
-	return 0;
-}
-
-static struct shash_alg crc32_pmull_algs[] = { {
-	.setkey			= crc32_setkey,
-	.init			= crc32_init,
-	.update			= crc32_update,
-	.final			= crc32_final,
-	.descsize		= sizeof(u32),
-	.digestsize		= sizeof(u32),
-
-	.base.cra_ctxsize	= sizeof(u32),
-	.base.cra_init		= crc32_cra_init,
-	.base.cra_name		= "crc32",
-	.base.cra_driver_name	= "crc32-arm-ce",
-	.base.cra_priority	= 200,
-	.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,
-	.base.cra_blocksize	= 1,
-	.base.cra_module	= THIS_MODULE,
-}, {
-	.setkey			= crc32_setkey,
-	.init			= crc32_init,
-	.update			= crc32c_update,
-	.final			= crc32c_final,
-	.descsize		= sizeof(u32),
-	.digestsize		= sizeof(u32),
-
-	.base.cra_ctxsize	= sizeof(u32),
-	.base.cra_init		= crc32c_cra_init,
-	.base.cra_name		= "crc32c",
-	.base.cra_driver_name	= "crc32c-arm-ce",
-	.base.cra_priority	= 200,
-	.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,
-	.base.cra_blocksize	= 1,
-	.base.cra_module	= THIS_MODULE,
-} };
-
-static int __init crc32_pmull_mod_init(void)
-{
-	if (elf_hwcap2 & HWCAP2_PMULL) {
-		crc32_pmull_algs[0].update = crc32_pmull_update;
-		crc32_pmull_algs[1].update = crc32c_pmull_update;
-
-		if (elf_hwcap2 & HWCAP2_CRC32) {
-			fallback_crc32 = crc32_armv8_le;
-			fallback_crc32c = crc32c_armv8_le;
-		} else {
-			fallback_crc32 = crc32_le;
-			fallback_crc32c = __crc32c_le;
-		}
-	} else if (!(elf_hwcap2 & HWCAP2_CRC32)) {
-		return -ENODEV;
-	}
-
-	return crypto_register_shashes(crc32_pmull_algs,
-				       ARRAY_SIZE(crc32_pmull_algs));
-}
-
-static void __exit crc32_pmull_mod_exit(void)
-{
-	crypto_unregister_shashes(crc32_pmull_algs,
-				  ARRAY_SIZE(crc32_pmull_algs));
-}
-
-static const struct cpu_feature __maybe_unused crc32_cpu_feature[] = {
-	{ cpu_feature(CRC32) }, { cpu_feature(PMULL) }, { }
-};
-MODULE_DEVICE_TABLE(cpu, crc32_cpu_feature);
-
-module_init(crc32_pmull_mod_init);
-module_exit(crc32_pmull_mod_exit);
-
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("crc32");
-MODULE_ALIAS_CRYPTO("crc32c");
diff --git a/arch/arm/crypto/crct10dif-ce-core.S b/arch/arm/crypto/crct10dif-ce-core.S
deleted file mode 100644
index 46c02c518a30..000000000000
--- a/arch/arm/crypto/crct10dif-ce-core.S
+++ /dev/null
@@ -1,381 +0,0 @@
-//
-// Accelerated CRC-T10DIF using ARM NEON and Crypto Extensions instructions
-//
-// Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org>
-// Copyright (C) 2019 Google LLC <ebiggers@google.com>
-//
-// This program is free software; you can redistribute it and/or modify
-// it under the terms of the GNU General Public License version 2 as
-// published by the Free Software Foundation.
-//
-
-// Derived from the x86 version:
-//
-// Implement fast CRC-T10DIF computation with SSE and PCLMULQDQ instructions
-//
-// Copyright (c) 2013, Intel Corporation
-//
-// Authors:
-//     Erdinc Ozturk <erdinc.ozturk@intel.com>
-//     Vinodh Gopal <vinodh.gopal@intel.com>
-//     James Guilford <james.guilford@intel.com>
-//     Tim Chen <tim.c.chen@linux.intel.com>
-//
-// This software is available to you under a choice of one of two
-// licenses.  You may choose to be licensed under the terms of the GNU
-// General Public License (GPL) Version 2, available from the file
-// COPYING in the main directory of this source tree, or the
-// OpenIB.org BSD license below:
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-// * Redistributions of source code must retain the above copyright
-//   notice, this list of conditions and the following disclaimer.
-//
-// * Redistributions in binary form must reproduce the above copyright
-//   notice, this list of conditions and the following disclaimer in the
-//   documentation and/or other materials provided with the
-//   distribution.
-//
-// * Neither the name of the Intel Corporation nor the names of its
-//   contributors may be used to endorse or promote products derived from
-//   this software without specific prior written permission.
-//
-//
-// THIS SOFTWARE IS PROVIDED BY INTEL CORPORATION ""AS IS"" AND ANY
-// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL CORPORATION OR
-// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-//       Reference paper titled "Fast CRC Computation for Generic
-//	Polynomials Using PCLMULQDQ Instruction"
-//       URL: http://www.intel.com/content/dam/www/public/us/en/documents
-//  /white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf
-//
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-#ifdef CONFIG_CPU_ENDIAN_BE8
-#define CPU_LE(code...)
-#else
-#define CPU_LE(code...)		code
-#endif
-
-	.text
-	.arch		armv8-a
-	.fpu		crypto-neon-fp-armv8
-
-	init_crc	.req	r0
-	buf		.req	r1
-	len		.req	r2
-
-	fold_consts_ptr	.req	ip
-
-	q0l		.req	d0
-	q0h		.req	d1
-	q1l		.req	d2
-	q1h		.req	d3
-	q2l		.req	d4
-	q2h		.req	d5
-	q3l		.req	d6
-	q3h		.req	d7
-	q4l		.req	d8
-	q4h		.req	d9
-	q5l		.req	d10
-	q5h		.req	d11
-	q6l		.req	d12
-	q6h		.req	d13
-	q7l		.req	d14
-	q7h		.req	d15
-	q8l		.req	d16
-	q8h		.req	d17
-	q9l		.req	d18
-	q9h		.req	d19
-	q10l		.req	d20
-	q10h		.req	d21
-	q11l		.req	d22
-	q11h		.req	d23
-	q12l		.req	d24
-	q12h		.req	d25
-
-	FOLD_CONSTS	.req	q10
-	FOLD_CONST_L	.req	q10l
-	FOLD_CONST_H	.req	q10h
-
-	// Fold reg1, reg2 into the next 32 data bytes, storing the result back
-	// into reg1, reg2.
-	.macro		fold_32_bytes, reg1, reg2
-	vld1.64		{q11-q12}, [buf]!
-
-	vmull.p64	q8, \reg1\()h, FOLD_CONST_H
-	vmull.p64	\reg1, \reg1\()l, FOLD_CONST_L
-	vmull.p64	q9, \reg2\()h, FOLD_CONST_H
-	vmull.p64	\reg2, \reg2\()l, FOLD_CONST_L
-
-CPU_LE(	vrev64.8	q11, q11	)
-CPU_LE(	vrev64.8	q12, q12	)
-	vswp		q11l, q11h
-	vswp		q12l, q12h
-
-	veor.8		\reg1, \reg1, q8
-	veor.8		\reg2, \reg2, q9
-	veor.8		\reg1, \reg1, q11
-	veor.8		\reg2, \reg2, q12
-	.endm
-
-	// Fold src_reg into dst_reg, optionally loading the next fold constants
-	.macro		fold_16_bytes, src_reg, dst_reg, load_next_consts
-	vmull.p64	q8, \src_reg\()l, FOLD_CONST_L
-	vmull.p64	\src_reg, \src_reg\()h, FOLD_CONST_H
-	.ifnb		\load_next_consts
-	vld1.64		{FOLD_CONSTS}, [fold_consts_ptr, :128]!
-	.endif
-	veor.8		\dst_reg, \dst_reg, q8
-	veor.8		\dst_reg, \dst_reg, \src_reg
-	.endm
-
-	.macro		__adrl, out, sym
-	movw		\out, #:lower16:\sym
-	movt		\out, #:upper16:\sym
-	.endm
-
-//
-// u16 crc_t10dif_pmull(u16 init_crc, const u8 *buf, size_t len);
-//
-// Assumes len >= 16.
-//
-ENTRY(crc_t10dif_pmull)
-
-	// For sizes less than 256 bytes, we can't fold 128 bytes at a time.
-	cmp		len, #256
-	blt		.Lless_than_256_bytes
-
-	__adrl		fold_consts_ptr, .Lfold_across_128_bytes_consts
-
-	// Load the first 128 data bytes.  Byte swapping is necessary to make
-	// the bit order match the polynomial coefficient order.
-	vld1.64		{q0-q1}, [buf]!
-	vld1.64		{q2-q3}, [buf]!
-	vld1.64		{q4-q5}, [buf]!
-	vld1.64		{q6-q7}, [buf]!
-CPU_LE(	vrev64.8	q0, q0	)
-CPU_LE(	vrev64.8	q1, q1	)
-CPU_LE(	vrev64.8	q2, q2	)
-CPU_LE(	vrev64.8	q3, q3	)
-CPU_LE(	vrev64.8	q4, q4	)
-CPU_LE(	vrev64.8	q5, q5	)
-CPU_LE(	vrev64.8	q6, q6	)
-CPU_LE(	vrev64.8	q7, q7	)
-	vswp		q0l, q0h
-	vswp		q1l, q1h
-	vswp		q2l, q2h
-	vswp		q3l, q3h
-	vswp		q4l, q4h
-	vswp		q5l, q5h
-	vswp		q6l, q6h
-	vswp		q7l, q7h
-
-	// XOR the first 16 data *bits* with the initial CRC value.
-	vmov.i8		q8h, #0
-	vmov.u16	q8h[3], init_crc
-	veor		q0h, q0h, q8h
-
-	// Load the constants for folding across 128 bytes.
-	vld1.64		{FOLD_CONSTS}, [fold_consts_ptr, :128]!
-
-	// Subtract 128 for the 128 data bytes just consumed.  Subtract another
-	// 128 to simplify the termination condition of the following loop.
-	sub		len, len, #256
-
-	// While >= 128 data bytes remain (not counting q0-q7), fold the 128
-	// bytes q0-q7 into them, storing the result back into q0-q7.
-.Lfold_128_bytes_loop:
-	fold_32_bytes	q0, q1
-	fold_32_bytes	q2, q3
-	fold_32_bytes	q4, q5
-	fold_32_bytes	q6, q7
-	subs		len, len, #128
-	bge		.Lfold_128_bytes_loop
-
-	// Now fold the 112 bytes in q0-q6 into the 16 bytes in q7.
-
-	// Fold across 64 bytes.
-	vld1.64		{FOLD_CONSTS}, [fold_consts_ptr, :128]!
-	fold_16_bytes	q0, q4
-	fold_16_bytes	q1, q5
-	fold_16_bytes	q2, q6
-	fold_16_bytes	q3, q7, 1
-	// Fold across 32 bytes.
-	fold_16_bytes	q4, q6
-	fold_16_bytes	q5, q7, 1
-	// Fold across 16 bytes.
-	fold_16_bytes	q6, q7
-
-	// Add 128 to get the correct number of data bytes remaining in 0...127
-	// (not counting q7), following the previous extra subtraction by 128.
-	// Then subtract 16 to simplify the termination condition of the
-	// following loop.
-	adds		len, len, #(128-16)
-
-	// While >= 16 data bytes remain (not counting q7), fold the 16 bytes q7
-	// into them, storing the result back into q7.
-	blt		.Lfold_16_bytes_loop_done
-.Lfold_16_bytes_loop:
-	vmull.p64	q8, q7l, FOLD_CONST_L
-	vmull.p64	q7, q7h, FOLD_CONST_H
-	veor.8		q7, q7, q8
-	vld1.64		{q0}, [buf]!
-CPU_LE(	vrev64.8	q0, q0	)
-	vswp		q0l, q0h
-	veor.8		q7, q7, q0
-	subs		len, len, #16
-	bge		.Lfold_16_bytes_loop
-
-.Lfold_16_bytes_loop_done:
-	// Add 16 to get the correct number of data bytes remaining in 0...15
-	// (not counting q7), following the previous extra subtraction by 16.
-	adds		len, len, #16
-	beq		.Lreduce_final_16_bytes
-
-.Lhandle_partial_segment:
-	// Reduce the last '16 + len' bytes where 1 <= len <= 15 and the first
-	// 16 bytes are in q7 and the rest are the remaining data in 'buf'.  To
-	// do this without needing a fold constant for each possible 'len',
-	// redivide the bytes into a first chunk of 'len' bytes and a second
-	// chunk of 16 bytes, then fold the first chunk into the second.
-
-	// q0 = last 16 original data bytes
-	add		buf, buf, len
-	sub		buf, buf, #16
-	vld1.64		{q0}, [buf]
-CPU_LE(	vrev64.8	q0, q0	)
-	vswp		q0l, q0h
-
-	// q1 = high order part of second chunk: q7 left-shifted by 'len' bytes.
-	__adrl		r3, .Lbyteshift_table + 16
-	sub		r3, r3, len
-	vld1.8		{q2}, [r3]
-	vtbl.8		q1l, {q7l-q7h}, q2l
-	vtbl.8		q1h, {q7l-q7h}, q2h
-
-	// q3 = first chunk: q7 right-shifted by '16-len' bytes.
-	vmov.i8		q3, #0x80
-	veor.8		q2, q2, q3
-	vtbl.8		q3l, {q7l-q7h}, q2l
-	vtbl.8		q3h, {q7l-q7h}, q2h
-
-	// Convert to 8-bit masks: 'len' 0x00 bytes, then '16-len' 0xff bytes.
-	vshr.s8		q2, q2, #7
-
-	// q2 = second chunk: 'len' bytes from q0 (low-order bytes),
-	// then '16-len' bytes from q1 (high-order bytes).
-	vbsl.8		q2, q1, q0
-
-	// Fold the first chunk into the second chunk, storing the result in q7.
-	vmull.p64	q0, q3l, FOLD_CONST_L
-	vmull.p64	q7, q3h, FOLD_CONST_H
-	veor.8		q7, q7, q0
-	veor.8		q7, q7, q2
-
-.Lreduce_final_16_bytes:
-	// Reduce the 128-bit value M(x), stored in q7, to the final 16-bit CRC.
-
-	// Load 'x^48 * (x^48 mod G(x))' and 'x^48 * (x^80 mod G(x))'.
-	vld1.64		{FOLD_CONSTS}, [fold_consts_ptr, :128]!
-
-	// Fold the high 64 bits into the low 64 bits, while also multiplying by
-	// x^64.  This produces a 128-bit value congruent to x^64 * M(x) and
-	// whose low 48 bits are 0.
-	vmull.p64	q0, q7h, FOLD_CONST_H	// high bits * x^48 * (x^80 mod G(x))
-	veor.8		q0h, q0h, q7l		// + low bits * x^64
-
-	// Fold the high 32 bits into the low 96 bits.  This produces a 96-bit
-	// value congruent to x^64 * M(x) and whose low 48 bits are 0.
-	vmov.i8		q1, #0
-	vmov		s4, s3			// extract high 32 bits
-	vmov		s3, s5			// zero high 32 bits
-	vmull.p64	q1, q1l, FOLD_CONST_L	// high 32 bits * x^48 * (x^48 mod G(x))
-	veor.8		q0, q0, q1		// + low bits
-
-	// Load G(x) and floor(x^48 / G(x)).
-	vld1.64		{FOLD_CONSTS}, [fold_consts_ptr, :128]
-
-	// Use Barrett reduction to compute the final CRC value.
-	vmull.p64	q1, q0h, FOLD_CONST_H	// high 32 bits * floor(x^48 / G(x))
-	vshr.u64	q1l, q1l, #32		// /= x^32
-	vmull.p64	q1, q1l, FOLD_CONST_L	// *= G(x)
-	vshr.u64	q0l, q0l, #48
-	veor.8		q0l, q0l, q1l		// + low 16 nonzero bits
-	// Final CRC value (x^16 * M(x)) mod G(x) is in low 16 bits of q0.
-
-	vmov.u16	r0, q0l[0]
-	bx		lr
-
-.Lless_than_256_bytes:
-	// Checksumming a buffer of length 16...255 bytes
-
-	__adrl		fold_consts_ptr, .Lfold_across_16_bytes_consts
-
-	// Load the first 16 data bytes.
-	vld1.64		{q7}, [buf]!
-CPU_LE(	vrev64.8	q7, q7	)
-	vswp		q7l, q7h
-
-	// XOR the first 16 data *bits* with the initial CRC value.
-	vmov.i8		q0h, #0
-	vmov.u16	q0h[3], init_crc
-	veor.8		q7h, q7h, q0h
-
-	// Load the fold-across-16-bytes constants.
-	vld1.64		{FOLD_CONSTS}, [fold_consts_ptr, :128]!
-
-	cmp		len, #16
-	beq		.Lreduce_final_16_bytes		// len == 16
-	subs		len, len, #32
-	addlt		len, len, #16
-	blt		.Lhandle_partial_segment	// 17 <= len <= 31
-	b		.Lfold_16_bytes_loop		// 32 <= len <= 255
-ENDPROC(crc_t10dif_pmull)
-
-	.section	".rodata", "a"
-	.align		4
-
-// Fold constants precomputed from the polynomial 0x18bb7
-// G(x) = x^16 + x^15 + x^11 + x^9 + x^8 + x^7 + x^5 + x^4 + x^2 + x^1 + x^0
-.Lfold_across_128_bytes_consts:
-	.quad		0x0000000000006123	// x^(8*128)	mod G(x)
-	.quad		0x0000000000002295	// x^(8*128+64)	mod G(x)
-// .Lfold_across_64_bytes_consts:
-	.quad		0x0000000000001069	// x^(4*128)	mod G(x)
-	.quad		0x000000000000dd31	// x^(4*128+64)	mod G(x)
-// .Lfold_across_32_bytes_consts:
-	.quad		0x000000000000857d	// x^(2*128)	mod G(x)
-	.quad		0x0000000000007acc	// x^(2*128+64)	mod G(x)
-.Lfold_across_16_bytes_consts:
-	.quad		0x000000000000a010	// x^(1*128)	mod G(x)
-	.quad		0x0000000000001faa	// x^(1*128+64)	mod G(x)
-// .Lfinal_fold_consts:
-	.quad		0x1368000000000000	// x^48 * (x^48 mod G(x))
-	.quad		0x2d56000000000000	// x^48 * (x^80 mod G(x))
-// .Lbarrett_reduction_consts:
-	.quad		0x0000000000018bb7	// G(x)
-	.quad		0x00000001f65a57f8	// floor(x^48 / G(x))
-
-// For 1 <= len <= 15, the 16-byte vector beginning at &byteshift_table[16 -
-// len] is the index vector to shift left by 'len' bytes, and is also {0x80,
-// ..., 0x80} XOR the index vector to shift right by '16 - len' bytes.
-.Lbyteshift_table:
-	.byte		 0x0, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87
-	.byte		0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f
-	.byte		 0x0,  0x1,  0x2,  0x3,  0x4,  0x5,  0x6,  0x7
-	.byte		 0x8,  0x9,  0xa,  0xb,  0xc,  0xd,  0xe , 0x0
diff --git a/arch/arm/crypto/crct10dif-ce-glue.c b/arch/arm/crypto/crct10dif-ce-glue.c
deleted file mode 100644
index e9191a8c87b9..000000000000
--- a/arch/arm/crypto/crct10dif-ce-glue.c
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Accelerated CRC-T10DIF using ARM NEON and Crypto Extensions instructions
- *
- * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <linux/crc-t10dif.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-
-#include <asm/neon.h>
-#include <asm/simd.h>
-
-#define CRC_T10DIF_PMULL_CHUNK_SIZE	16U
-
-asmlinkage u16 crc_t10dif_pmull(u16 init_crc, const u8 *buf, size_t len);
-
-static int crct10dif_init(struct shash_desc *desc)
-{
-	u16 *crc = shash_desc_ctx(desc);
-
-	*crc = 0;
-	return 0;
-}
-
-static int crct10dif_update(struct shash_desc *desc, const u8 *data,
-			    unsigned int length)
-{
-	u16 *crc = shash_desc_ctx(desc);
-
-	if (length >= CRC_T10DIF_PMULL_CHUNK_SIZE && crypto_simd_usable()) {
-		kernel_neon_begin();
-		*crc = crc_t10dif_pmull(*crc, data, length);
-		kernel_neon_end();
-	} else {
-		*crc = crc_t10dif_generic(*crc, data, length);
-	}
-
-	return 0;
-}
-
-static int crct10dif_final(struct shash_desc *desc, u8 *out)
-{
-	u16 *crc = shash_desc_ctx(desc);
-
-	*(u16 *)out = *crc;
-	return 0;
-}
-
-static struct shash_alg crc_t10dif_alg = {
-	.digestsize		= CRC_T10DIF_DIGEST_SIZE,
-	.init			= crct10dif_init,
-	.update			= crct10dif_update,
-	.final			= crct10dif_final,
-	.descsize		= CRC_T10DIF_DIGEST_SIZE,
-
-	.base.cra_name		= "crct10dif",
-	.base.cra_driver_name	= "crct10dif-arm-ce",
-	.base.cra_priority	= 200,
-	.base.cra_blocksize	= CRC_T10DIF_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-};
-
-static int __init crc_t10dif_mod_init(void)
-{
-	if (!(elf_hwcap2 & HWCAP2_PMULL))
-		return -ENODEV;
-
-	return crypto_register_shash(&crc_t10dif_alg);
-}
-
-static void __exit crc_t10dif_mod_exit(void)
-{
-	crypto_unregister_shash(&crc_t10dif_alg);
-}
-
-module_init(crc_t10dif_mod_init);
-module_exit(crc_t10dif_mod_exit);
-
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("crct10dif");
diff --git a/arch/arm/crypto/curve25519-core.S b/arch/arm/crypto/curve25519-core.S
deleted file mode 100644
index b697fa5d059a..000000000000
--- a/arch/arm/crypto/curve25519-core.S
+++ /dev/null
@@ -1,2062 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 OR MIT */
-/*
- * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
- *
- * Based on public domain code from Daniel J. Bernstein and Peter Schwabe. This
- * began from SUPERCOP's curve25519/neon2/scalarmult.s, but has subsequently been
- * manually reworked for use in kernel space.
- */
-
-#include <linux/linkage.h>
-
-.text
-.arch armv7-a
-.fpu neon
-.align 4
-
-ENTRY(curve25519_neon)
-	push		{r4-r11, lr}
-	mov		ip, sp
-	sub		r3, sp, #704
-	and		r3, r3, #0xfffffff0
-	mov		sp, r3
-	movw		r4, #0
-	movw		r5, #254
-	vmov.i32	q0, #1
-	vshr.u64	q1, q0, #7
-	vshr.u64	q0, q0, #8
-	vmov.i32	d4, #19
-	vmov.i32	d5, #38
-	add		r6, sp, #480
-	vst1.8		{d2-d3}, [r6, : 128]!
-	vst1.8		{d0-d1}, [r6, : 128]!
-	vst1.8		{d4-d5}, [r6, : 128]
-	add		r6, r3, #0
-	vmov.i32	q2, #0
-	vst1.8		{d4-d5}, [r6, : 128]!
-	vst1.8		{d4-d5}, [r6, : 128]!
-	vst1.8		d4, [r6, : 64]
-	add		r6, r3, #0
-	movw		r7, #960
-	sub		r7, r7, #2
-	neg		r7, r7
-	sub		r7, r7, r7, LSL #7
-	str		r7, [r6]
-	add		r6, sp, #672
-	vld1.8		{d4-d5}, [r1]!
-	vld1.8		{d6-d7}, [r1]
-	vst1.8		{d4-d5}, [r6, : 128]!
-	vst1.8		{d6-d7}, [r6, : 128]
-	sub		r1, r6, #16
-	ldrb		r6, [r1]
-	and		r6, r6, #248
-	strb		r6, [r1]
-	ldrb		r6, [r1, #31]
-	and		r6, r6, #127
-	orr		r6, r6, #64
-	strb		r6, [r1, #31]
-	vmov.i64	q2, #0xffffffff
-	vshr.u64	q3, q2, #7
-	vshr.u64	q2, q2, #6
-	vld1.8		{d8}, [r2]
-	vld1.8		{d10}, [r2]
-	add		r2, r2, #6
-	vld1.8		{d12}, [r2]
-	vld1.8		{d14}, [r2]
-	add		r2, r2, #6
-	vld1.8		{d16}, [r2]
-	add		r2, r2, #4
-	vld1.8		{d18}, [r2]
-	vld1.8		{d20}, [r2]
-	add		r2, r2, #6
-	vld1.8		{d22}, [r2]
-	add		r2, r2, #2
-	vld1.8		{d24}, [r2]
-	vld1.8		{d26}, [r2]
-	vshr.u64	q5, q5, #26
-	vshr.u64	q6, q6, #3
-	vshr.u64	q7, q7, #29
-	vshr.u64	q8, q8, #6
-	vshr.u64	q10, q10, #25
-	vshr.u64	q11, q11, #3
-	vshr.u64	q12, q12, #12
-	vshr.u64	q13, q13, #38
-	vand		q4, q4, q2
-	vand		q6, q6, q2
-	vand		q8, q8, q2
-	vand		q10, q10, q2
-	vand		q2, q12, q2
-	vand		q5, q5, q3
-	vand		q7, q7, q3
-	vand		q9, q9, q3
-	vand		q11, q11, q3
-	vand		q3, q13, q3
-	add		r2, r3, #48
-	vadd.i64	q12, q4, q1
-	vadd.i64	q13, q10, q1
-	vshr.s64	q12, q12, #26
-	vshr.s64	q13, q13, #26
-	vadd.i64	q5, q5, q12
-	vshl.i64	q12, q12, #26
-	vadd.i64	q14, q5, q0
-	vadd.i64	q11, q11, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q15, q11, q0
-	vsub.i64	q4, q4, q12
-	vshr.s64	q12, q14, #25
-	vsub.i64	q10, q10, q13
-	vshr.s64	q13, q15, #25
-	vadd.i64	q6, q6, q12
-	vshl.i64	q12, q12, #25
-	vadd.i64	q14, q6, q1
-	vadd.i64	q2, q2, q13
-	vsub.i64	q5, q5, q12
-	vshr.s64	q12, q14, #26
-	vshl.i64	q13, q13, #25
-	vadd.i64	q14, q2, q1
-	vadd.i64	q7, q7, q12
-	vshl.i64	q12, q12, #26
-	vadd.i64	q15, q7, q0
-	vsub.i64	q11, q11, q13
-	vshr.s64	q13, q14, #26
-	vsub.i64	q6, q6, q12
-	vshr.s64	q12, q15, #25
-	vadd.i64	q3, q3, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q14, q3, q0
-	vadd.i64	q8, q8, q12
-	vshl.i64	q12, q12, #25
-	vadd.i64	q15, q8, q1
-	add		r2, r2, #8
-	vsub.i64	q2, q2, q13
-	vshr.s64	q13, q14, #25
-	vsub.i64	q7, q7, q12
-	vshr.s64	q12, q15, #26
-	vadd.i64	q14, q13, q13
-	vadd.i64	q9, q9, q12
-	vtrn.32		d12, d14
-	vshl.i64	q12, q12, #26
-	vtrn.32		d13, d15
-	vadd.i64	q0, q9, q0
-	vadd.i64	q4, q4, q14
-	vst1.8		d12, [r2, : 64]!
-	vshl.i64	q6, q13, #4
-	vsub.i64	q7, q8, q12
-	vshr.s64	q0, q0, #25
-	vadd.i64	q4, q4, q6
-	vadd.i64	q6, q10, q0
-	vshl.i64	q0, q0, #25
-	vadd.i64	q8, q6, q1
-	vadd.i64	q4, q4, q13
-	vshl.i64	q10, q13, #25
-	vadd.i64	q1, q4, q1
-	vsub.i64	q0, q9, q0
-	vshr.s64	q8, q8, #26
-	vsub.i64	q3, q3, q10
-	vtrn.32		d14, d0
-	vshr.s64	q1, q1, #26
-	vtrn.32		d15, d1
-	vadd.i64	q0, q11, q8
-	vst1.8		d14, [r2, : 64]
-	vshl.i64	q7, q8, #26
-	vadd.i64	q5, q5, q1
-	vtrn.32		d4, d6
-	vshl.i64	q1, q1, #26
-	vtrn.32		d5, d7
-	vsub.i64	q3, q6, q7
-	add		r2, r2, #16
-	vsub.i64	q1, q4, q1
-	vst1.8		d4, [r2, : 64]
-	vtrn.32		d6, d0
-	vtrn.32		d7, d1
-	sub		r2, r2, #8
-	vtrn.32		d2, d10
-	vtrn.32		d3, d11
-	vst1.8		d6, [r2, : 64]
-	sub		r2, r2, #24
-	vst1.8		d2, [r2, : 64]
-	add		r2, r3, #96
-	vmov.i32	q0, #0
-	vmov.i64	d2, #0xff
-	vmov.i64	d3, #0
-	vshr.u32	q1, q1, #7
-	vst1.8		{d2-d3}, [r2, : 128]!
-	vst1.8		{d0-d1}, [r2, : 128]!
-	vst1.8		d0, [r2, : 64]
-	add		r2, r3, #144
-	vmov.i32	q0, #0
-	vst1.8		{d0-d1}, [r2, : 128]!
-	vst1.8		{d0-d1}, [r2, : 128]!
-	vst1.8		d0, [r2, : 64]
-	add		r2, r3, #240
-	vmov.i32	q0, #0
-	vmov.i64	d2, #0xff
-	vmov.i64	d3, #0
-	vshr.u32	q1, q1, #7
-	vst1.8		{d2-d3}, [r2, : 128]!
-	vst1.8		{d0-d1}, [r2, : 128]!
-	vst1.8		d0, [r2, : 64]
-	add		r2, r3, #48
-	add		r6, r3, #192
-	vld1.8		{d0-d1}, [r2, : 128]!
-	vld1.8		{d2-d3}, [r2, : 128]!
-	vld1.8		{d4}, [r2, : 64]
-	vst1.8		{d0-d1}, [r6, : 128]!
-	vst1.8		{d2-d3}, [r6, : 128]!
-	vst1.8		d4, [r6, : 64]
-.Lmainloop:
-	mov		r2, r5, LSR #3
-	and		r6, r5, #7
-	ldrb		r2, [r1, r2]
-	mov		r2, r2, LSR r6
-	and		r2, r2, #1
-	str		r5, [sp, #456]
-	eor		r4, r4, r2
-	str		r2, [sp, #460]
-	neg		r2, r4
-	add		r4, r3, #96
-	add		r5, r3, #192
-	add		r6, r3, #144
-	vld1.8		{d8-d9}, [r4, : 128]!
-	add		r7, r3, #240
-	vld1.8		{d10-d11}, [r5, : 128]!
-	veor		q6, q4, q5
-	vld1.8		{d14-d15}, [r6, : 128]!
-	vdup.i32	q8, r2
-	vld1.8		{d18-d19}, [r7, : 128]!
-	veor		q10, q7, q9
-	vld1.8		{d22-d23}, [r4, : 128]!
-	vand		q6, q6, q8
-	vld1.8		{d24-d25}, [r5, : 128]!
-	vand		q10, q10, q8
-	vld1.8		{d26-d27}, [r6, : 128]!
-	veor		q4, q4, q6
-	vld1.8		{d28-d29}, [r7, : 128]!
-	veor		q5, q5, q6
-	vld1.8		{d0}, [r4, : 64]
-	veor		q6, q7, q10
-	vld1.8		{d2}, [r5, : 64]
-	veor		q7, q9, q10
-	vld1.8		{d4}, [r6, : 64]
-	veor		q9, q11, q12
-	vld1.8		{d6}, [r7, : 64]
-	veor		q10, q0, q1
-	sub		r2, r4, #32
-	vand		q9, q9, q8
-	sub		r4, r5, #32
-	vand		q10, q10, q8
-	sub		r5, r6, #32
-	veor		q11, q11, q9
-	sub		r6, r7, #32
-	veor		q0, q0, q10
-	veor		q9, q12, q9
-	veor		q1, q1, q10
-	veor		q10, q13, q14
-	veor		q12, q2, q3
-	vand		q10, q10, q8
-	vand		q8, q12, q8
-	veor		q12, q13, q10
-	veor		q2, q2, q8
-	veor		q10, q14, q10
-	veor		q3, q3, q8
-	vadd.i32	q8, q4, q6
-	vsub.i32	q4, q4, q6
-	vst1.8		{d16-d17}, [r2, : 128]!
-	vadd.i32	q6, q11, q12
-	vst1.8		{d8-d9}, [r5, : 128]!
-	vsub.i32	q4, q11, q12
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vadd.i32	q6, q0, q2
-	vst1.8		{d8-d9}, [r5, : 128]!
-	vsub.i32	q0, q0, q2
-	vst1.8		d12, [r2, : 64]
-	vadd.i32	q2, q5, q7
-	vst1.8		d0, [r5, : 64]
-	vsub.i32	q0, q5, q7
-	vst1.8		{d4-d5}, [r4, : 128]!
-	vadd.i32	q2, q9, q10
-	vst1.8		{d0-d1}, [r6, : 128]!
-	vsub.i32	q0, q9, q10
-	vst1.8		{d4-d5}, [r4, : 128]!
-	vadd.i32	q2, q1, q3
-	vst1.8		{d0-d1}, [r6, : 128]!
-	vsub.i32	q0, q1, q3
-	vst1.8		d4, [r4, : 64]
-	vst1.8		d0, [r6, : 64]
-	add		r2, sp, #512
-	add		r4, r3, #96
-	add		r5, r3, #144
-	vld1.8		{d0-d1}, [r2, : 128]
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vld1.8		{d4-d5}, [r5, : 128]!
-	vzip.i32	q1, q2
-	vld1.8		{d6-d7}, [r4, : 128]!
-	vld1.8		{d8-d9}, [r5, : 128]!
-	vshl.i32	q5, q1, #1
-	vzip.i32	q3, q4
-	vshl.i32	q6, q2, #1
-	vld1.8		{d14}, [r4, : 64]
-	vshl.i32	q8, q3, #1
-	vld1.8		{d15}, [r5, : 64]
-	vshl.i32	q9, q4, #1
-	vmul.i32	d21, d7, d1
-	vtrn.32		d14, d15
-	vmul.i32	q11, q4, q0
-	vmul.i32	q0, q7, q0
-	vmull.s32	q12, d2, d2
-	vmlal.s32	q12, d11, d1
-	vmlal.s32	q12, d12, d0
-	vmlal.s32	q12, d13, d23
-	vmlal.s32	q12, d16, d22
-	vmlal.s32	q12, d7, d21
-	vmull.s32	q10, d2, d11
-	vmlal.s32	q10, d4, d1
-	vmlal.s32	q10, d13, d0
-	vmlal.s32	q10, d6, d23
-	vmlal.s32	q10, d17, d22
-	vmull.s32	q13, d10, d4
-	vmlal.s32	q13, d11, d3
-	vmlal.s32	q13, d13, d1
-	vmlal.s32	q13, d16, d0
-	vmlal.s32	q13, d17, d23
-	vmlal.s32	q13, d8, d22
-	vmull.s32	q1, d10, d5
-	vmlal.s32	q1, d11, d4
-	vmlal.s32	q1, d6, d1
-	vmlal.s32	q1, d17, d0
-	vmlal.s32	q1, d8, d23
-	vmull.s32	q14, d10, d6
-	vmlal.s32	q14, d11, d13
-	vmlal.s32	q14, d4, d4
-	vmlal.s32	q14, d17, d1
-	vmlal.s32	q14, d18, d0
-	vmlal.s32	q14, d9, d23
-	vmull.s32	q11, d10, d7
-	vmlal.s32	q11, d11, d6
-	vmlal.s32	q11, d12, d5
-	vmlal.s32	q11, d8, d1
-	vmlal.s32	q11, d19, d0
-	vmull.s32	q15, d10, d8
-	vmlal.s32	q15, d11, d17
-	vmlal.s32	q15, d12, d6
-	vmlal.s32	q15, d13, d5
-	vmlal.s32	q15, d19, d1
-	vmlal.s32	q15, d14, d0
-	vmull.s32	q2, d10, d9
-	vmlal.s32	q2, d11, d8
-	vmlal.s32	q2, d12, d7
-	vmlal.s32	q2, d13, d6
-	vmlal.s32	q2, d14, d1
-	vmull.s32	q0, d15, d1
-	vmlal.s32	q0, d10, d14
-	vmlal.s32	q0, d11, d19
-	vmlal.s32	q0, d12, d8
-	vmlal.s32	q0, d13, d17
-	vmlal.s32	q0, d6, d6
-	add		r2, sp, #480
-	vld1.8		{d18-d19}, [r2, : 128]!
-	vmull.s32	q3, d16, d7
-	vmlal.s32	q3, d10, d15
-	vmlal.s32	q3, d11, d14
-	vmlal.s32	q3, d12, d9
-	vmlal.s32	q3, d13, d8
-	vld1.8		{d8-d9}, [r2, : 128]
-	vadd.i64	q5, q12, q9
-	vadd.i64	q6, q15, q9
-	vshr.s64	q5, q5, #26
-	vshr.s64	q6, q6, #26
-	vadd.i64	q7, q10, q5
-	vshl.i64	q5, q5, #26
-	vadd.i64	q8, q7, q4
-	vadd.i64	q2, q2, q6
-	vshl.i64	q6, q6, #26
-	vadd.i64	q10, q2, q4
-	vsub.i64	q5, q12, q5
-	vshr.s64	q8, q8, #25
-	vsub.i64	q6, q15, q6
-	vshr.s64	q10, q10, #25
-	vadd.i64	q12, q13, q8
-	vshl.i64	q8, q8, #25
-	vadd.i64	q13, q12, q9
-	vadd.i64	q0, q0, q10
-	vsub.i64	q7, q7, q8
-	vshr.s64	q8, q13, #26
-	vshl.i64	q10, q10, #25
-	vadd.i64	q13, q0, q9
-	vadd.i64	q1, q1, q8
-	vshl.i64	q8, q8, #26
-	vadd.i64	q15, q1, q4
-	vsub.i64	q2, q2, q10
-	vshr.s64	q10, q13, #26
-	vsub.i64	q8, q12, q8
-	vshr.s64	q12, q15, #25
-	vadd.i64	q3, q3, q10
-	vshl.i64	q10, q10, #26
-	vadd.i64	q13, q3, q4
-	vadd.i64	q14, q14, q12
-	add		r2, r3, #288
-	vshl.i64	q12, q12, #25
-	add		r4, r3, #336
-	vadd.i64	q15, q14, q9
-	add		r2, r2, #8
-	vsub.i64	q0, q0, q10
-	add		r4, r4, #8
-	vshr.s64	q10, q13, #25
-	vsub.i64	q1, q1, q12
-	vshr.s64	q12, q15, #26
-	vadd.i64	q13, q10, q10
-	vadd.i64	q11, q11, q12
-	vtrn.32		d16, d2
-	vshl.i64	q12, q12, #26
-	vtrn.32		d17, d3
-	vadd.i64	q1, q11, q4
-	vadd.i64	q4, q5, q13
-	vst1.8		d16, [r2, : 64]!
-	vshl.i64	q5, q10, #4
-	vst1.8		d17, [r4, : 64]!
-	vsub.i64	q8, q14, q12
-	vshr.s64	q1, q1, #25
-	vadd.i64	q4, q4, q5
-	vadd.i64	q5, q6, q1
-	vshl.i64	q1, q1, #25
-	vadd.i64	q6, q5, q9
-	vadd.i64	q4, q4, q10
-	vshl.i64	q10, q10, #25
-	vadd.i64	q9, q4, q9
-	vsub.i64	q1, q11, q1
-	vshr.s64	q6, q6, #26
-	vsub.i64	q3, q3, q10
-	vtrn.32		d16, d2
-	vshr.s64	q9, q9, #26
-	vtrn.32		d17, d3
-	vadd.i64	q1, q2, q6
-	vst1.8		d16, [r2, : 64]
-	vshl.i64	q2, q6, #26
-	vst1.8		d17, [r4, : 64]
-	vadd.i64	q6, q7, q9
-	vtrn.32		d0, d6
-	vshl.i64	q7, q9, #26
-	vtrn.32		d1, d7
-	vsub.i64	q2, q5, q2
-	add		r2, r2, #16
-	vsub.i64	q3, q4, q7
-	vst1.8		d0, [r2, : 64]
-	add		r4, r4, #16
-	vst1.8		d1, [r4, : 64]
-	vtrn.32		d4, d2
-	vtrn.32		d5, d3
-	sub		r2, r2, #8
-	sub		r4, r4, #8
-	vtrn.32		d6, d12
-	vtrn.32		d7, d13
-	vst1.8		d4, [r2, : 64]
-	vst1.8		d5, [r4, : 64]
-	sub		r2, r2, #24
-	sub		r4, r4, #24
-	vst1.8		d6, [r2, : 64]
-	vst1.8		d7, [r4, : 64]
-	add		r2, r3, #240
-	add		r4, r3, #96
-	vld1.8		{d0-d1}, [r4, : 128]!
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vld1.8		{d4}, [r4, : 64]
-	add		r4, r3, #144
-	vld1.8		{d6-d7}, [r4, : 128]!
-	vtrn.32		q0, q3
-	vld1.8		{d8-d9}, [r4, : 128]!
-	vshl.i32	q5, q0, #4
-	vtrn.32		q1, q4
-	vshl.i32	q6, q3, #4
-	vadd.i32	q5, q5, q0
-	vadd.i32	q6, q6, q3
-	vshl.i32	q7, q1, #4
-	vld1.8		{d5}, [r4, : 64]
-	vshl.i32	q8, q4, #4
-	vtrn.32		d4, d5
-	vadd.i32	q7, q7, q1
-	vadd.i32	q8, q8, q4
-	vld1.8		{d18-d19}, [r2, : 128]!
-	vshl.i32	q10, q2, #4
-	vld1.8		{d22-d23}, [r2, : 128]!
-	vadd.i32	q10, q10, q2
-	vld1.8		{d24}, [r2, : 64]
-	vadd.i32	q5, q5, q0
-	add		r2, r3, #192
-	vld1.8		{d26-d27}, [r2, : 128]!
-	vadd.i32	q6, q6, q3
-	vld1.8		{d28-d29}, [r2, : 128]!
-	vadd.i32	q8, q8, q4
-	vld1.8		{d25}, [r2, : 64]
-	vadd.i32	q10, q10, q2
-	vtrn.32		q9, q13
-	vadd.i32	q7, q7, q1
-	vadd.i32	q5, q5, q0
-	vtrn.32		q11, q14
-	vadd.i32	q6, q6, q3
-	add		r2, sp, #528
-	vadd.i32	q10, q10, q2
-	vtrn.32		d24, d25
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vshl.i32	q6, q13, #1
-	vst1.8		{d20-d21}, [r2, : 128]!
-	vshl.i32	q10, q14, #1
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vshl.i32	q15, q12, #1
-	vadd.i32	q8, q8, q4
-	vext.32		d10, d31, d30, #0
-	vadd.i32	q7, q7, q1
-	vst1.8		{d16-d17}, [r2, : 128]!
-	vmull.s32	q8, d18, d5
-	vmlal.s32	q8, d26, d4
-	vmlal.s32	q8, d19, d9
-	vmlal.s32	q8, d27, d3
-	vmlal.s32	q8, d22, d8
-	vmlal.s32	q8, d28, d2
-	vmlal.s32	q8, d23, d7
-	vmlal.s32	q8, d29, d1
-	vmlal.s32	q8, d24, d6
-	vmlal.s32	q8, d25, d0
-	vst1.8		{d14-d15}, [r2, : 128]!
-	vmull.s32	q2, d18, d4
-	vmlal.s32	q2, d12, d9
-	vmlal.s32	q2, d13, d8
-	vmlal.s32	q2, d19, d3
-	vmlal.s32	q2, d22, d2
-	vmlal.s32	q2, d23, d1
-	vmlal.s32	q2, d24, d0
-	vst1.8		{d20-d21}, [r2, : 128]!
-	vmull.s32	q7, d18, d9
-	vmlal.s32	q7, d26, d3
-	vmlal.s32	q7, d19, d8
-	vmlal.s32	q7, d27, d2
-	vmlal.s32	q7, d22, d7
-	vmlal.s32	q7, d28, d1
-	vmlal.s32	q7, d23, d6
-	vmlal.s32	q7, d29, d0
-	vst1.8		{d10-d11}, [r2, : 128]!
-	vmull.s32	q5, d18, d3
-	vmlal.s32	q5, d19, d2
-	vmlal.s32	q5, d22, d1
-	vmlal.s32	q5, d23, d0
-	vmlal.s32	q5, d12, d8
-	vst1.8		{d16-d17}, [r2, : 128]
-	vmull.s32	q4, d18, d8
-	vmlal.s32	q4, d26, d2
-	vmlal.s32	q4, d19, d7
-	vmlal.s32	q4, d27, d1
-	vmlal.s32	q4, d22, d6
-	vmlal.s32	q4, d28, d0
-	vmull.s32	q8, d18, d7
-	vmlal.s32	q8, d26, d1
-	vmlal.s32	q8, d19, d6
-	vmlal.s32	q8, d27, d0
-	add		r2, sp, #544
-	vld1.8		{d20-d21}, [r2, : 128]
-	vmlal.s32	q7, d24, d21
-	vmlal.s32	q7, d25, d20
-	vmlal.s32	q4, d23, d21
-	vmlal.s32	q4, d29, d20
-	vmlal.s32	q8, d22, d21
-	vmlal.s32	q8, d28, d20
-	vmlal.s32	q5, d24, d20
-	vst1.8		{d14-d15}, [r2, : 128]
-	vmull.s32	q7, d18, d6
-	vmlal.s32	q7, d26, d0
-	add		r2, sp, #624
-	vld1.8		{d30-d31}, [r2, : 128]
-	vmlal.s32	q2, d30, d21
-	vmlal.s32	q7, d19, d21
-	vmlal.s32	q7, d27, d20
-	add		r2, sp, #592
-	vld1.8		{d26-d27}, [r2, : 128]
-	vmlal.s32	q4, d25, d27
-	vmlal.s32	q8, d29, d27
-	vmlal.s32	q8, d25, d26
-	vmlal.s32	q7, d28, d27
-	vmlal.s32	q7, d29, d26
-	add		r2, sp, #576
-	vld1.8		{d28-d29}, [r2, : 128]
-	vmlal.s32	q4, d24, d29
-	vmlal.s32	q8, d23, d29
-	vmlal.s32	q8, d24, d28
-	vmlal.s32	q7, d22, d29
-	vmlal.s32	q7, d23, d28
-	vst1.8		{d8-d9}, [r2, : 128]
-	add		r2, sp, #528
-	vld1.8		{d8-d9}, [r2, : 128]
-	vmlal.s32	q7, d24, d9
-	vmlal.s32	q7, d25, d31
-	vmull.s32	q1, d18, d2
-	vmlal.s32	q1, d19, d1
-	vmlal.s32	q1, d22, d0
-	vmlal.s32	q1, d24, d27
-	vmlal.s32	q1, d23, d20
-	vmlal.s32	q1, d12, d7
-	vmlal.s32	q1, d13, d6
-	vmull.s32	q6, d18, d1
-	vmlal.s32	q6, d19, d0
-	vmlal.s32	q6, d23, d27
-	vmlal.s32	q6, d22, d20
-	vmlal.s32	q6, d24, d26
-	vmull.s32	q0, d18, d0
-	vmlal.s32	q0, d22, d27
-	vmlal.s32	q0, d23, d26
-	vmlal.s32	q0, d24, d31
-	vmlal.s32	q0, d19, d20
-	add		r2, sp, #608
-	vld1.8		{d18-d19}, [r2, : 128]
-	vmlal.s32	q2, d18, d7
-	vmlal.s32	q5, d18, d6
-	vmlal.s32	q1, d18, d21
-	vmlal.s32	q0, d18, d28
-	vmlal.s32	q6, d18, d29
-	vmlal.s32	q2, d19, d6
-	vmlal.s32	q5, d19, d21
-	vmlal.s32	q1, d19, d29
-	vmlal.s32	q0, d19, d9
-	vmlal.s32	q6, d19, d28
-	add		r2, sp, #560
-	vld1.8		{d18-d19}, [r2, : 128]
-	add		r2, sp, #480
-	vld1.8		{d22-d23}, [r2, : 128]
-	vmlal.s32	q5, d19, d7
-	vmlal.s32	q0, d18, d21
-	vmlal.s32	q0, d19, d29
-	vmlal.s32	q6, d18, d6
-	add		r2, sp, #496
-	vld1.8		{d6-d7}, [r2, : 128]
-	vmlal.s32	q6, d19, d21
-	add		r2, sp, #544
-	vld1.8		{d18-d19}, [r2, : 128]
-	vmlal.s32	q0, d30, d8
-	add		r2, sp, #640
-	vld1.8		{d20-d21}, [r2, : 128]
-	vmlal.s32	q5, d30, d29
-	add		r2, sp, #576
-	vld1.8		{d24-d25}, [r2, : 128]
-	vmlal.s32	q1, d30, d28
-	vadd.i64	q13, q0, q11
-	vadd.i64	q14, q5, q11
-	vmlal.s32	q6, d30, d9
-	vshr.s64	q4, q13, #26
-	vshr.s64	q13, q14, #26
-	vadd.i64	q7, q7, q4
-	vshl.i64	q4, q4, #26
-	vadd.i64	q14, q7, q3
-	vadd.i64	q9, q9, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q15, q9, q3
-	vsub.i64	q0, q0, q4
-	vshr.s64	q4, q14, #25
-	vsub.i64	q5, q5, q13
-	vshr.s64	q13, q15, #25
-	vadd.i64	q6, q6, q4
-	vshl.i64	q4, q4, #25
-	vadd.i64	q14, q6, q11
-	vadd.i64	q2, q2, q13
-	vsub.i64	q4, q7, q4
-	vshr.s64	q7, q14, #26
-	vshl.i64	q13, q13, #25
-	vadd.i64	q14, q2, q11
-	vadd.i64	q8, q8, q7
-	vshl.i64	q7, q7, #26
-	vadd.i64	q15, q8, q3
-	vsub.i64	q9, q9, q13
-	vshr.s64	q13, q14, #26
-	vsub.i64	q6, q6, q7
-	vshr.s64	q7, q15, #25
-	vadd.i64	q10, q10, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q14, q10, q3
-	vadd.i64	q1, q1, q7
-	add		r2, r3, #144
-	vshl.i64	q7, q7, #25
-	add		r4, r3, #96
-	vadd.i64	q15, q1, q11
-	add		r2, r2, #8
-	vsub.i64	q2, q2, q13
-	add		r4, r4, #8
-	vshr.s64	q13, q14, #25
-	vsub.i64	q7, q8, q7
-	vshr.s64	q8, q15, #26
-	vadd.i64	q14, q13, q13
-	vadd.i64	q12, q12, q8
-	vtrn.32		d12, d14
-	vshl.i64	q8, q8, #26
-	vtrn.32		d13, d15
-	vadd.i64	q3, q12, q3
-	vadd.i64	q0, q0, q14
-	vst1.8		d12, [r2, : 64]!
-	vshl.i64	q7, q13, #4
-	vst1.8		d13, [r4, : 64]!
-	vsub.i64	q1, q1, q8
-	vshr.s64	q3, q3, #25
-	vadd.i64	q0, q0, q7
-	vadd.i64	q5, q5, q3
-	vshl.i64	q3, q3, #25
-	vadd.i64	q6, q5, q11
-	vadd.i64	q0, q0, q13
-	vshl.i64	q7, q13, #25
-	vadd.i64	q8, q0, q11
-	vsub.i64	q3, q12, q3
-	vshr.s64	q6, q6, #26
-	vsub.i64	q7, q10, q7
-	vtrn.32		d2, d6
-	vshr.s64	q8, q8, #26
-	vtrn.32		d3, d7
-	vadd.i64	q3, q9, q6
-	vst1.8		d2, [r2, : 64]
-	vshl.i64	q6, q6, #26
-	vst1.8		d3, [r4, : 64]
-	vadd.i64	q1, q4, q8
-	vtrn.32		d4, d14
-	vshl.i64	q4, q8, #26
-	vtrn.32		d5, d15
-	vsub.i64	q5, q5, q6
-	add		r2, r2, #16
-	vsub.i64	q0, q0, q4
-	vst1.8		d4, [r2, : 64]
-	add		r4, r4, #16
-	vst1.8		d5, [r4, : 64]
-	vtrn.32		d10, d6
-	vtrn.32		d11, d7
-	sub		r2, r2, #8
-	sub		r4, r4, #8
-	vtrn.32		d0, d2
-	vtrn.32		d1, d3
-	vst1.8		d10, [r2, : 64]
-	vst1.8		d11, [r4, : 64]
-	sub		r2, r2, #24
-	sub		r4, r4, #24
-	vst1.8		d0, [r2, : 64]
-	vst1.8		d1, [r4, : 64]
-	add		r2, r3, #288
-	add		r4, r3, #336
-	vld1.8		{d0-d1}, [r2, : 128]!
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vsub.i32	q0, q0, q1
-	vld1.8		{d2-d3}, [r2, : 128]!
-	vld1.8		{d4-d5}, [r4, : 128]!
-	vsub.i32	q1, q1, q2
-	add		r5, r3, #240
-	vld1.8		{d4}, [r2, : 64]
-	vld1.8		{d6}, [r4, : 64]
-	vsub.i32	q2, q2, q3
-	vst1.8		{d0-d1}, [r5, : 128]!
-	vst1.8		{d2-d3}, [r5, : 128]!
-	vst1.8		d4, [r5, : 64]
-	add		r2, r3, #144
-	add		r4, r3, #96
-	add		r5, r3, #144
-	add		r6, r3, #192
-	vld1.8		{d0-d1}, [r2, : 128]!
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vsub.i32	q2, q0, q1
-	vadd.i32	q0, q0, q1
-	vld1.8		{d2-d3}, [r2, : 128]!
-	vld1.8		{d6-d7}, [r4, : 128]!
-	vsub.i32	q4, q1, q3
-	vadd.i32	q1, q1, q3
-	vld1.8		{d6}, [r2, : 64]
-	vld1.8		{d10}, [r4, : 64]
-	vsub.i32	q6, q3, q5
-	vadd.i32	q3, q3, q5
-	vst1.8		{d4-d5}, [r5, : 128]!
-	vst1.8		{d0-d1}, [r6, : 128]!
-	vst1.8		{d8-d9}, [r5, : 128]!
-	vst1.8		{d2-d3}, [r6, : 128]!
-	vst1.8		d12, [r5, : 64]
-	vst1.8		d6, [r6, : 64]
-	add		r2, r3, #0
-	add		r4, r3, #240
-	vld1.8		{d0-d1}, [r4, : 128]!
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vld1.8		{d4}, [r4, : 64]
-	add		r4, r3, #336
-	vld1.8		{d6-d7}, [r4, : 128]!
-	vtrn.32		q0, q3
-	vld1.8		{d8-d9}, [r4, : 128]!
-	vshl.i32	q5, q0, #4
-	vtrn.32		q1, q4
-	vshl.i32	q6, q3, #4
-	vadd.i32	q5, q5, q0
-	vadd.i32	q6, q6, q3
-	vshl.i32	q7, q1, #4
-	vld1.8		{d5}, [r4, : 64]
-	vshl.i32	q8, q4, #4
-	vtrn.32		d4, d5
-	vadd.i32	q7, q7, q1
-	vadd.i32	q8, q8, q4
-	vld1.8		{d18-d19}, [r2, : 128]!
-	vshl.i32	q10, q2, #4
-	vld1.8		{d22-d23}, [r2, : 128]!
-	vadd.i32	q10, q10, q2
-	vld1.8		{d24}, [r2, : 64]
-	vadd.i32	q5, q5, q0
-	add		r2, r3, #288
-	vld1.8		{d26-d27}, [r2, : 128]!
-	vadd.i32	q6, q6, q3
-	vld1.8		{d28-d29}, [r2, : 128]!
-	vadd.i32	q8, q8, q4
-	vld1.8		{d25}, [r2, : 64]
-	vadd.i32	q10, q10, q2
-	vtrn.32		q9, q13
-	vadd.i32	q7, q7, q1
-	vadd.i32	q5, q5, q0
-	vtrn.32		q11, q14
-	vadd.i32	q6, q6, q3
-	add		r2, sp, #528
-	vadd.i32	q10, q10, q2
-	vtrn.32		d24, d25
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vshl.i32	q6, q13, #1
-	vst1.8		{d20-d21}, [r2, : 128]!
-	vshl.i32	q10, q14, #1
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vshl.i32	q15, q12, #1
-	vadd.i32	q8, q8, q4
-	vext.32		d10, d31, d30, #0
-	vadd.i32	q7, q7, q1
-	vst1.8		{d16-d17}, [r2, : 128]!
-	vmull.s32	q8, d18, d5
-	vmlal.s32	q8, d26, d4
-	vmlal.s32	q8, d19, d9
-	vmlal.s32	q8, d27, d3
-	vmlal.s32	q8, d22, d8
-	vmlal.s32	q8, d28, d2
-	vmlal.s32	q8, d23, d7
-	vmlal.s32	q8, d29, d1
-	vmlal.s32	q8, d24, d6
-	vmlal.s32	q8, d25, d0
-	vst1.8		{d14-d15}, [r2, : 128]!
-	vmull.s32	q2, d18, d4
-	vmlal.s32	q2, d12, d9
-	vmlal.s32	q2, d13, d8
-	vmlal.s32	q2, d19, d3
-	vmlal.s32	q2, d22, d2
-	vmlal.s32	q2, d23, d1
-	vmlal.s32	q2, d24, d0
-	vst1.8		{d20-d21}, [r2, : 128]!
-	vmull.s32	q7, d18, d9
-	vmlal.s32	q7, d26, d3
-	vmlal.s32	q7, d19, d8
-	vmlal.s32	q7, d27, d2
-	vmlal.s32	q7, d22, d7
-	vmlal.s32	q7, d28, d1
-	vmlal.s32	q7, d23, d6
-	vmlal.s32	q7, d29, d0
-	vst1.8		{d10-d11}, [r2, : 128]!
-	vmull.s32	q5, d18, d3
-	vmlal.s32	q5, d19, d2
-	vmlal.s32	q5, d22, d1
-	vmlal.s32	q5, d23, d0
-	vmlal.s32	q5, d12, d8
-	vst1.8		{d16-d17}, [r2, : 128]!
-	vmull.s32	q4, d18, d8
-	vmlal.s32	q4, d26, d2
-	vmlal.s32	q4, d19, d7
-	vmlal.s32	q4, d27, d1
-	vmlal.s32	q4, d22, d6
-	vmlal.s32	q4, d28, d0
-	vmull.s32	q8, d18, d7
-	vmlal.s32	q8, d26, d1
-	vmlal.s32	q8, d19, d6
-	vmlal.s32	q8, d27, d0
-	add		r2, sp, #544
-	vld1.8		{d20-d21}, [r2, : 128]
-	vmlal.s32	q7, d24, d21
-	vmlal.s32	q7, d25, d20
-	vmlal.s32	q4, d23, d21
-	vmlal.s32	q4, d29, d20
-	vmlal.s32	q8, d22, d21
-	vmlal.s32	q8, d28, d20
-	vmlal.s32	q5, d24, d20
-	vst1.8		{d14-d15}, [r2, : 128]
-	vmull.s32	q7, d18, d6
-	vmlal.s32	q7, d26, d0
-	add		r2, sp, #624
-	vld1.8		{d30-d31}, [r2, : 128]
-	vmlal.s32	q2, d30, d21
-	vmlal.s32	q7, d19, d21
-	vmlal.s32	q7, d27, d20
-	add		r2, sp, #592
-	vld1.8		{d26-d27}, [r2, : 128]
-	vmlal.s32	q4, d25, d27
-	vmlal.s32	q8, d29, d27
-	vmlal.s32	q8, d25, d26
-	vmlal.s32	q7, d28, d27
-	vmlal.s32	q7, d29, d26
-	add		r2, sp, #576
-	vld1.8		{d28-d29}, [r2, : 128]
-	vmlal.s32	q4, d24, d29
-	vmlal.s32	q8, d23, d29
-	vmlal.s32	q8, d24, d28
-	vmlal.s32	q7, d22, d29
-	vmlal.s32	q7, d23, d28
-	vst1.8		{d8-d9}, [r2, : 128]
-	add		r2, sp, #528
-	vld1.8		{d8-d9}, [r2, : 128]
-	vmlal.s32	q7, d24, d9
-	vmlal.s32	q7, d25, d31
-	vmull.s32	q1, d18, d2
-	vmlal.s32	q1, d19, d1
-	vmlal.s32	q1, d22, d0
-	vmlal.s32	q1, d24, d27
-	vmlal.s32	q1, d23, d20
-	vmlal.s32	q1, d12, d7
-	vmlal.s32	q1, d13, d6
-	vmull.s32	q6, d18, d1
-	vmlal.s32	q6, d19, d0
-	vmlal.s32	q6, d23, d27
-	vmlal.s32	q6, d22, d20
-	vmlal.s32	q6, d24, d26
-	vmull.s32	q0, d18, d0
-	vmlal.s32	q0, d22, d27
-	vmlal.s32	q0, d23, d26
-	vmlal.s32	q0, d24, d31
-	vmlal.s32	q0, d19, d20
-	add		r2, sp, #608
-	vld1.8		{d18-d19}, [r2, : 128]
-	vmlal.s32	q2, d18, d7
-	vmlal.s32	q5, d18, d6
-	vmlal.s32	q1, d18, d21
-	vmlal.s32	q0, d18, d28
-	vmlal.s32	q6, d18, d29
-	vmlal.s32	q2, d19, d6
-	vmlal.s32	q5, d19, d21
-	vmlal.s32	q1, d19, d29
-	vmlal.s32	q0, d19, d9
-	vmlal.s32	q6, d19, d28
-	add		r2, sp, #560
-	vld1.8		{d18-d19}, [r2, : 128]
-	add		r2, sp, #480
-	vld1.8		{d22-d23}, [r2, : 128]
-	vmlal.s32	q5, d19, d7
-	vmlal.s32	q0, d18, d21
-	vmlal.s32	q0, d19, d29
-	vmlal.s32	q6, d18, d6
-	add		r2, sp, #496
-	vld1.8		{d6-d7}, [r2, : 128]
-	vmlal.s32	q6, d19, d21
-	add		r2, sp, #544
-	vld1.8		{d18-d19}, [r2, : 128]
-	vmlal.s32	q0, d30, d8
-	add		r2, sp, #640
-	vld1.8		{d20-d21}, [r2, : 128]
-	vmlal.s32	q5, d30, d29
-	add		r2, sp, #576
-	vld1.8		{d24-d25}, [r2, : 128]
-	vmlal.s32	q1, d30, d28
-	vadd.i64	q13, q0, q11
-	vadd.i64	q14, q5, q11
-	vmlal.s32	q6, d30, d9
-	vshr.s64	q4, q13, #26
-	vshr.s64	q13, q14, #26
-	vadd.i64	q7, q7, q4
-	vshl.i64	q4, q4, #26
-	vadd.i64	q14, q7, q3
-	vadd.i64	q9, q9, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q15, q9, q3
-	vsub.i64	q0, q0, q4
-	vshr.s64	q4, q14, #25
-	vsub.i64	q5, q5, q13
-	vshr.s64	q13, q15, #25
-	vadd.i64	q6, q6, q4
-	vshl.i64	q4, q4, #25
-	vadd.i64	q14, q6, q11
-	vadd.i64	q2, q2, q13
-	vsub.i64	q4, q7, q4
-	vshr.s64	q7, q14, #26
-	vshl.i64	q13, q13, #25
-	vadd.i64	q14, q2, q11
-	vadd.i64	q8, q8, q7
-	vshl.i64	q7, q7, #26
-	vadd.i64	q15, q8, q3
-	vsub.i64	q9, q9, q13
-	vshr.s64	q13, q14, #26
-	vsub.i64	q6, q6, q7
-	vshr.s64	q7, q15, #25
-	vadd.i64	q10, q10, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q14, q10, q3
-	vadd.i64	q1, q1, q7
-	add		r2, r3, #288
-	vshl.i64	q7, q7, #25
-	add		r4, r3, #96
-	vadd.i64	q15, q1, q11
-	add		r2, r2, #8
-	vsub.i64	q2, q2, q13
-	add		r4, r4, #8
-	vshr.s64	q13, q14, #25
-	vsub.i64	q7, q8, q7
-	vshr.s64	q8, q15, #26
-	vadd.i64	q14, q13, q13
-	vadd.i64	q12, q12, q8
-	vtrn.32		d12, d14
-	vshl.i64	q8, q8, #26
-	vtrn.32		d13, d15
-	vadd.i64	q3, q12, q3
-	vadd.i64	q0, q0, q14
-	vst1.8		d12, [r2, : 64]!
-	vshl.i64	q7, q13, #4
-	vst1.8		d13, [r4, : 64]!
-	vsub.i64	q1, q1, q8
-	vshr.s64	q3, q3, #25
-	vadd.i64	q0, q0, q7
-	vadd.i64	q5, q5, q3
-	vshl.i64	q3, q3, #25
-	vadd.i64	q6, q5, q11
-	vadd.i64	q0, q0, q13
-	vshl.i64	q7, q13, #25
-	vadd.i64	q8, q0, q11
-	vsub.i64	q3, q12, q3
-	vshr.s64	q6, q6, #26
-	vsub.i64	q7, q10, q7
-	vtrn.32		d2, d6
-	vshr.s64	q8, q8, #26
-	vtrn.32		d3, d7
-	vadd.i64	q3, q9, q6
-	vst1.8		d2, [r2, : 64]
-	vshl.i64	q6, q6, #26
-	vst1.8		d3, [r4, : 64]
-	vadd.i64	q1, q4, q8
-	vtrn.32		d4, d14
-	vshl.i64	q4, q8, #26
-	vtrn.32		d5, d15
-	vsub.i64	q5, q5, q6
-	add		r2, r2, #16
-	vsub.i64	q0, q0, q4
-	vst1.8		d4, [r2, : 64]
-	add		r4, r4, #16
-	vst1.8		d5, [r4, : 64]
-	vtrn.32		d10, d6
-	vtrn.32		d11, d7
-	sub		r2, r2, #8
-	sub		r4, r4, #8
-	vtrn.32		d0, d2
-	vtrn.32		d1, d3
-	vst1.8		d10, [r2, : 64]
-	vst1.8		d11, [r4, : 64]
-	sub		r2, r2, #24
-	sub		r4, r4, #24
-	vst1.8		d0, [r2, : 64]
-	vst1.8		d1, [r4, : 64]
-	add		r2, sp, #512
-	add		r4, r3, #144
-	add		r5, r3, #192
-	vld1.8		{d0-d1}, [r2, : 128]
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vld1.8		{d4-d5}, [r5, : 128]!
-	vzip.i32	q1, q2
-	vld1.8		{d6-d7}, [r4, : 128]!
-	vld1.8		{d8-d9}, [r5, : 128]!
-	vshl.i32	q5, q1, #1
-	vzip.i32	q3, q4
-	vshl.i32	q6, q2, #1
-	vld1.8		{d14}, [r4, : 64]
-	vshl.i32	q8, q3, #1
-	vld1.8		{d15}, [r5, : 64]
-	vshl.i32	q9, q4, #1
-	vmul.i32	d21, d7, d1
-	vtrn.32		d14, d15
-	vmul.i32	q11, q4, q0
-	vmul.i32	q0, q7, q0
-	vmull.s32	q12, d2, d2
-	vmlal.s32	q12, d11, d1
-	vmlal.s32	q12, d12, d0
-	vmlal.s32	q12, d13, d23
-	vmlal.s32	q12, d16, d22
-	vmlal.s32	q12, d7, d21
-	vmull.s32	q10, d2, d11
-	vmlal.s32	q10, d4, d1
-	vmlal.s32	q10, d13, d0
-	vmlal.s32	q10, d6, d23
-	vmlal.s32	q10, d17, d22
-	vmull.s32	q13, d10, d4
-	vmlal.s32	q13, d11, d3
-	vmlal.s32	q13, d13, d1
-	vmlal.s32	q13, d16, d0
-	vmlal.s32	q13, d17, d23
-	vmlal.s32	q13, d8, d22
-	vmull.s32	q1, d10, d5
-	vmlal.s32	q1, d11, d4
-	vmlal.s32	q1, d6, d1
-	vmlal.s32	q1, d17, d0
-	vmlal.s32	q1, d8, d23
-	vmull.s32	q14, d10, d6
-	vmlal.s32	q14, d11, d13
-	vmlal.s32	q14, d4, d4
-	vmlal.s32	q14, d17, d1
-	vmlal.s32	q14, d18, d0
-	vmlal.s32	q14, d9, d23
-	vmull.s32	q11, d10, d7
-	vmlal.s32	q11, d11, d6
-	vmlal.s32	q11, d12, d5
-	vmlal.s32	q11, d8, d1
-	vmlal.s32	q11, d19, d0
-	vmull.s32	q15, d10, d8
-	vmlal.s32	q15, d11, d17
-	vmlal.s32	q15, d12, d6
-	vmlal.s32	q15, d13, d5
-	vmlal.s32	q15, d19, d1
-	vmlal.s32	q15, d14, d0
-	vmull.s32	q2, d10, d9
-	vmlal.s32	q2, d11, d8
-	vmlal.s32	q2, d12, d7
-	vmlal.s32	q2, d13, d6
-	vmlal.s32	q2, d14, d1
-	vmull.s32	q0, d15, d1
-	vmlal.s32	q0, d10, d14
-	vmlal.s32	q0, d11, d19
-	vmlal.s32	q0, d12, d8
-	vmlal.s32	q0, d13, d17
-	vmlal.s32	q0, d6, d6
-	add		r2, sp, #480
-	vld1.8		{d18-d19}, [r2, : 128]!
-	vmull.s32	q3, d16, d7
-	vmlal.s32	q3, d10, d15
-	vmlal.s32	q3, d11, d14
-	vmlal.s32	q3, d12, d9
-	vmlal.s32	q3, d13, d8
-	vld1.8		{d8-d9}, [r2, : 128]
-	vadd.i64	q5, q12, q9
-	vadd.i64	q6, q15, q9
-	vshr.s64	q5, q5, #26
-	vshr.s64	q6, q6, #26
-	vadd.i64	q7, q10, q5
-	vshl.i64	q5, q5, #26
-	vadd.i64	q8, q7, q4
-	vadd.i64	q2, q2, q6
-	vshl.i64	q6, q6, #26
-	vadd.i64	q10, q2, q4
-	vsub.i64	q5, q12, q5
-	vshr.s64	q8, q8, #25
-	vsub.i64	q6, q15, q6
-	vshr.s64	q10, q10, #25
-	vadd.i64	q12, q13, q8
-	vshl.i64	q8, q8, #25
-	vadd.i64	q13, q12, q9
-	vadd.i64	q0, q0, q10
-	vsub.i64	q7, q7, q8
-	vshr.s64	q8, q13, #26
-	vshl.i64	q10, q10, #25
-	vadd.i64	q13, q0, q9
-	vadd.i64	q1, q1, q8
-	vshl.i64	q8, q8, #26
-	vadd.i64	q15, q1, q4
-	vsub.i64	q2, q2, q10
-	vshr.s64	q10, q13, #26
-	vsub.i64	q8, q12, q8
-	vshr.s64	q12, q15, #25
-	vadd.i64	q3, q3, q10
-	vshl.i64	q10, q10, #26
-	vadd.i64	q13, q3, q4
-	vadd.i64	q14, q14, q12
-	add		r2, r3, #144
-	vshl.i64	q12, q12, #25
-	add		r4, r3, #192
-	vadd.i64	q15, q14, q9
-	add		r2, r2, #8
-	vsub.i64	q0, q0, q10
-	add		r4, r4, #8
-	vshr.s64	q10, q13, #25
-	vsub.i64	q1, q1, q12
-	vshr.s64	q12, q15, #26
-	vadd.i64	q13, q10, q10
-	vadd.i64	q11, q11, q12
-	vtrn.32		d16, d2
-	vshl.i64	q12, q12, #26
-	vtrn.32		d17, d3
-	vadd.i64	q1, q11, q4
-	vadd.i64	q4, q5, q13
-	vst1.8		d16, [r2, : 64]!
-	vshl.i64	q5, q10, #4
-	vst1.8		d17, [r4, : 64]!
-	vsub.i64	q8, q14, q12
-	vshr.s64	q1, q1, #25
-	vadd.i64	q4, q4, q5
-	vadd.i64	q5, q6, q1
-	vshl.i64	q1, q1, #25
-	vadd.i64	q6, q5, q9
-	vadd.i64	q4, q4, q10
-	vshl.i64	q10, q10, #25
-	vadd.i64	q9, q4, q9
-	vsub.i64	q1, q11, q1
-	vshr.s64	q6, q6, #26
-	vsub.i64	q3, q3, q10
-	vtrn.32		d16, d2
-	vshr.s64	q9, q9, #26
-	vtrn.32		d17, d3
-	vadd.i64	q1, q2, q6
-	vst1.8		d16, [r2, : 64]
-	vshl.i64	q2, q6, #26
-	vst1.8		d17, [r4, : 64]
-	vadd.i64	q6, q7, q9
-	vtrn.32		d0, d6
-	vshl.i64	q7, q9, #26
-	vtrn.32		d1, d7
-	vsub.i64	q2, q5, q2
-	add		r2, r2, #16
-	vsub.i64	q3, q4, q7
-	vst1.8		d0, [r2, : 64]
-	add		r4, r4, #16
-	vst1.8		d1, [r4, : 64]
-	vtrn.32		d4, d2
-	vtrn.32		d5, d3
-	sub		r2, r2, #8
-	sub		r4, r4, #8
-	vtrn.32		d6, d12
-	vtrn.32		d7, d13
-	vst1.8		d4, [r2, : 64]
-	vst1.8		d5, [r4, : 64]
-	sub		r2, r2, #24
-	sub		r4, r4, #24
-	vst1.8		d6, [r2, : 64]
-	vst1.8		d7, [r4, : 64]
-	add		r2, r3, #336
-	add		r4, r3, #288
-	vld1.8		{d0-d1}, [r2, : 128]!
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vadd.i32	q0, q0, q1
-	vld1.8		{d2-d3}, [r2, : 128]!
-	vld1.8		{d4-d5}, [r4, : 128]!
-	vadd.i32	q1, q1, q2
-	add		r5, r3, #288
-	vld1.8		{d4}, [r2, : 64]
-	vld1.8		{d6}, [r4, : 64]
-	vadd.i32	q2, q2, q3
-	vst1.8		{d0-d1}, [r5, : 128]!
-	vst1.8		{d2-d3}, [r5, : 128]!
-	vst1.8		d4, [r5, : 64]
-	add		r2, r3, #48
-	add		r4, r3, #144
-	vld1.8		{d0-d1}, [r4, : 128]!
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vld1.8		{d4}, [r4, : 64]
-	add		r4, r3, #288
-	vld1.8		{d6-d7}, [r4, : 128]!
-	vtrn.32		q0, q3
-	vld1.8		{d8-d9}, [r4, : 128]!
-	vshl.i32	q5, q0, #4
-	vtrn.32		q1, q4
-	vshl.i32	q6, q3, #4
-	vadd.i32	q5, q5, q0
-	vadd.i32	q6, q6, q3
-	vshl.i32	q7, q1, #4
-	vld1.8		{d5}, [r4, : 64]
-	vshl.i32	q8, q4, #4
-	vtrn.32		d4, d5
-	vadd.i32	q7, q7, q1
-	vadd.i32	q8, q8, q4
-	vld1.8		{d18-d19}, [r2, : 128]!
-	vshl.i32	q10, q2, #4
-	vld1.8		{d22-d23}, [r2, : 128]!
-	vadd.i32	q10, q10, q2
-	vld1.8		{d24}, [r2, : 64]
-	vadd.i32	q5, q5, q0
-	add		r2, r3, #240
-	vld1.8		{d26-d27}, [r2, : 128]!
-	vadd.i32	q6, q6, q3
-	vld1.8		{d28-d29}, [r2, : 128]!
-	vadd.i32	q8, q8, q4
-	vld1.8		{d25}, [r2, : 64]
-	vadd.i32	q10, q10, q2
-	vtrn.32		q9, q13
-	vadd.i32	q7, q7, q1
-	vadd.i32	q5, q5, q0
-	vtrn.32		q11, q14
-	vadd.i32	q6, q6, q3
-	add		r2, sp, #528
-	vadd.i32	q10, q10, q2
-	vtrn.32		d24, d25
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vshl.i32	q6, q13, #1
-	vst1.8		{d20-d21}, [r2, : 128]!
-	vshl.i32	q10, q14, #1
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vshl.i32	q15, q12, #1
-	vadd.i32	q8, q8, q4
-	vext.32		d10, d31, d30, #0
-	vadd.i32	q7, q7, q1
-	vst1.8		{d16-d17}, [r2, : 128]!
-	vmull.s32	q8, d18, d5
-	vmlal.s32	q8, d26, d4
-	vmlal.s32	q8, d19, d9
-	vmlal.s32	q8, d27, d3
-	vmlal.s32	q8, d22, d8
-	vmlal.s32	q8, d28, d2
-	vmlal.s32	q8, d23, d7
-	vmlal.s32	q8, d29, d1
-	vmlal.s32	q8, d24, d6
-	vmlal.s32	q8, d25, d0
-	vst1.8		{d14-d15}, [r2, : 128]!
-	vmull.s32	q2, d18, d4
-	vmlal.s32	q2, d12, d9
-	vmlal.s32	q2, d13, d8
-	vmlal.s32	q2, d19, d3
-	vmlal.s32	q2, d22, d2
-	vmlal.s32	q2, d23, d1
-	vmlal.s32	q2, d24, d0
-	vst1.8		{d20-d21}, [r2, : 128]!
-	vmull.s32	q7, d18, d9
-	vmlal.s32	q7, d26, d3
-	vmlal.s32	q7, d19, d8
-	vmlal.s32	q7, d27, d2
-	vmlal.s32	q7, d22, d7
-	vmlal.s32	q7, d28, d1
-	vmlal.s32	q7, d23, d6
-	vmlal.s32	q7, d29, d0
-	vst1.8		{d10-d11}, [r2, : 128]!
-	vmull.s32	q5, d18, d3
-	vmlal.s32	q5, d19, d2
-	vmlal.s32	q5, d22, d1
-	vmlal.s32	q5, d23, d0
-	vmlal.s32	q5, d12, d8
-	vst1.8		{d16-d17}, [r2, : 128]!
-	vmull.s32	q4, d18, d8
-	vmlal.s32	q4, d26, d2
-	vmlal.s32	q4, d19, d7
-	vmlal.s32	q4, d27, d1
-	vmlal.s32	q4, d22, d6
-	vmlal.s32	q4, d28, d0
-	vmull.s32	q8, d18, d7
-	vmlal.s32	q8, d26, d1
-	vmlal.s32	q8, d19, d6
-	vmlal.s32	q8, d27, d0
-	add		r2, sp, #544
-	vld1.8		{d20-d21}, [r2, : 128]
-	vmlal.s32	q7, d24, d21
-	vmlal.s32	q7, d25, d20
-	vmlal.s32	q4, d23, d21
-	vmlal.s32	q4, d29, d20
-	vmlal.s32	q8, d22, d21
-	vmlal.s32	q8, d28, d20
-	vmlal.s32	q5, d24, d20
-	vst1.8		{d14-d15}, [r2, : 128]
-	vmull.s32	q7, d18, d6
-	vmlal.s32	q7, d26, d0
-	add		r2, sp, #624
-	vld1.8		{d30-d31}, [r2, : 128]
-	vmlal.s32	q2, d30, d21
-	vmlal.s32	q7, d19, d21
-	vmlal.s32	q7, d27, d20
-	add		r2, sp, #592
-	vld1.8		{d26-d27}, [r2, : 128]
-	vmlal.s32	q4, d25, d27
-	vmlal.s32	q8, d29, d27
-	vmlal.s32	q8, d25, d26
-	vmlal.s32	q7, d28, d27
-	vmlal.s32	q7, d29, d26
-	add		r2, sp, #576
-	vld1.8		{d28-d29}, [r2, : 128]
-	vmlal.s32	q4, d24, d29
-	vmlal.s32	q8, d23, d29
-	vmlal.s32	q8, d24, d28
-	vmlal.s32	q7, d22, d29
-	vmlal.s32	q7, d23, d28
-	vst1.8		{d8-d9}, [r2, : 128]
-	add		r2, sp, #528
-	vld1.8		{d8-d9}, [r2, : 128]
-	vmlal.s32	q7, d24, d9
-	vmlal.s32	q7, d25, d31
-	vmull.s32	q1, d18, d2
-	vmlal.s32	q1, d19, d1
-	vmlal.s32	q1, d22, d0
-	vmlal.s32	q1, d24, d27
-	vmlal.s32	q1, d23, d20
-	vmlal.s32	q1, d12, d7
-	vmlal.s32	q1, d13, d6
-	vmull.s32	q6, d18, d1
-	vmlal.s32	q6, d19, d0
-	vmlal.s32	q6, d23, d27
-	vmlal.s32	q6, d22, d20
-	vmlal.s32	q6, d24, d26
-	vmull.s32	q0, d18, d0
-	vmlal.s32	q0, d22, d27
-	vmlal.s32	q0, d23, d26
-	vmlal.s32	q0, d24, d31
-	vmlal.s32	q0, d19, d20
-	add		r2, sp, #608
-	vld1.8		{d18-d19}, [r2, : 128]
-	vmlal.s32	q2, d18, d7
-	vmlal.s32	q5, d18, d6
-	vmlal.s32	q1, d18, d21
-	vmlal.s32	q0, d18, d28
-	vmlal.s32	q6, d18, d29
-	vmlal.s32	q2, d19, d6
-	vmlal.s32	q5, d19, d21
-	vmlal.s32	q1, d19, d29
-	vmlal.s32	q0, d19, d9
-	vmlal.s32	q6, d19, d28
-	add		r2, sp, #560
-	vld1.8		{d18-d19}, [r2, : 128]
-	add		r2, sp, #480
-	vld1.8		{d22-d23}, [r2, : 128]
-	vmlal.s32	q5, d19, d7
-	vmlal.s32	q0, d18, d21
-	vmlal.s32	q0, d19, d29
-	vmlal.s32	q6, d18, d6
-	add		r2, sp, #496
-	vld1.8		{d6-d7}, [r2, : 128]
-	vmlal.s32	q6, d19, d21
-	add		r2, sp, #544
-	vld1.8		{d18-d19}, [r2, : 128]
-	vmlal.s32	q0, d30, d8
-	add		r2, sp, #640
-	vld1.8		{d20-d21}, [r2, : 128]
-	vmlal.s32	q5, d30, d29
-	add		r2, sp, #576
-	vld1.8		{d24-d25}, [r2, : 128]
-	vmlal.s32	q1, d30, d28
-	vadd.i64	q13, q0, q11
-	vadd.i64	q14, q5, q11
-	vmlal.s32	q6, d30, d9
-	vshr.s64	q4, q13, #26
-	vshr.s64	q13, q14, #26
-	vadd.i64	q7, q7, q4
-	vshl.i64	q4, q4, #26
-	vadd.i64	q14, q7, q3
-	vadd.i64	q9, q9, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q15, q9, q3
-	vsub.i64	q0, q0, q4
-	vshr.s64	q4, q14, #25
-	vsub.i64	q5, q5, q13
-	vshr.s64	q13, q15, #25
-	vadd.i64	q6, q6, q4
-	vshl.i64	q4, q4, #25
-	vadd.i64	q14, q6, q11
-	vadd.i64	q2, q2, q13
-	vsub.i64	q4, q7, q4
-	vshr.s64	q7, q14, #26
-	vshl.i64	q13, q13, #25
-	vadd.i64	q14, q2, q11
-	vadd.i64	q8, q8, q7
-	vshl.i64	q7, q7, #26
-	vadd.i64	q15, q8, q3
-	vsub.i64	q9, q9, q13
-	vshr.s64	q13, q14, #26
-	vsub.i64	q6, q6, q7
-	vshr.s64	q7, q15, #25
-	vadd.i64	q10, q10, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q14, q10, q3
-	vadd.i64	q1, q1, q7
-	add		r2, r3, #240
-	vshl.i64	q7, q7, #25
-	add		r4, r3, #144
-	vadd.i64	q15, q1, q11
-	add		r2, r2, #8
-	vsub.i64	q2, q2, q13
-	add		r4, r4, #8
-	vshr.s64	q13, q14, #25
-	vsub.i64	q7, q8, q7
-	vshr.s64	q8, q15, #26
-	vadd.i64	q14, q13, q13
-	vadd.i64	q12, q12, q8
-	vtrn.32		d12, d14
-	vshl.i64	q8, q8, #26
-	vtrn.32		d13, d15
-	vadd.i64	q3, q12, q3
-	vadd.i64	q0, q0, q14
-	vst1.8		d12, [r2, : 64]!
-	vshl.i64	q7, q13, #4
-	vst1.8		d13, [r4, : 64]!
-	vsub.i64	q1, q1, q8
-	vshr.s64	q3, q3, #25
-	vadd.i64	q0, q0, q7
-	vadd.i64	q5, q5, q3
-	vshl.i64	q3, q3, #25
-	vadd.i64	q6, q5, q11
-	vadd.i64	q0, q0, q13
-	vshl.i64	q7, q13, #25
-	vadd.i64	q8, q0, q11
-	vsub.i64	q3, q12, q3
-	vshr.s64	q6, q6, #26
-	vsub.i64	q7, q10, q7
-	vtrn.32		d2, d6
-	vshr.s64	q8, q8, #26
-	vtrn.32		d3, d7
-	vadd.i64	q3, q9, q6
-	vst1.8		d2, [r2, : 64]
-	vshl.i64	q6, q6, #26
-	vst1.8		d3, [r4, : 64]
-	vadd.i64	q1, q4, q8
-	vtrn.32		d4, d14
-	vshl.i64	q4, q8, #26
-	vtrn.32		d5, d15
-	vsub.i64	q5, q5, q6
-	add		r2, r2, #16
-	vsub.i64	q0, q0, q4
-	vst1.8		d4, [r2, : 64]
-	add		r4, r4, #16
-	vst1.8		d5, [r4, : 64]
-	vtrn.32		d10, d6
-	vtrn.32		d11, d7
-	sub		r2, r2, #8
-	sub		r4, r4, #8
-	vtrn.32		d0, d2
-	vtrn.32		d1, d3
-	vst1.8		d10, [r2, : 64]
-	vst1.8		d11, [r4, : 64]
-	sub		r2, r2, #24
-	sub		r4, r4, #24
-	vst1.8		d0, [r2, : 64]
-	vst1.8		d1, [r4, : 64]
-	ldr		r2, [sp, #456]
-	ldr		r4, [sp, #460]
-	subs		r5, r2, #1
-	bge		.Lmainloop
-	add		r1, r3, #144
-	add		r2, r3, #336
-	vld1.8		{d0-d1}, [r1, : 128]!
-	vld1.8		{d2-d3}, [r1, : 128]!
-	vld1.8		{d4}, [r1, : 64]
-	vst1.8		{d0-d1}, [r2, : 128]!
-	vst1.8		{d2-d3}, [r2, : 128]!
-	vst1.8		d4, [r2, : 64]
-	movw		r1, #0
-.Linvertloop:
-	add		r2, r3, #144
-	movw		r4, #0
-	movw		r5, #2
-	cmp		r1, #1
-	moveq		r5, #1
-	addeq		r2, r3, #336
-	addeq		r4, r3, #48
-	cmp		r1, #2
-	moveq		r5, #1
-	addeq		r2, r3, #48
-	cmp		r1, #3
-	moveq		r5, #5
-	addeq		r4, r3, #336
-	cmp		r1, #4
-	moveq		r5, #10
-	cmp		r1, #5
-	moveq		r5, #20
-	cmp		r1, #6
-	moveq		r5, #10
-	addeq		r2, r3, #336
-	addeq		r4, r3, #336
-	cmp		r1, #7
-	moveq		r5, #50
-	cmp		r1, #8
-	moveq		r5, #100
-	cmp		r1, #9
-	moveq		r5, #50
-	addeq		r2, r3, #336
-	cmp		r1, #10
-	moveq		r5, #5
-	addeq		r2, r3, #48
-	cmp		r1, #11
-	moveq		r5, #0
-	addeq		r2, r3, #96
-	add		r6, r3, #144
-	add		r7, r3, #288
-	vld1.8		{d0-d1}, [r6, : 128]!
-	vld1.8		{d2-d3}, [r6, : 128]!
-	vld1.8		{d4}, [r6, : 64]
-	vst1.8		{d0-d1}, [r7, : 128]!
-	vst1.8		{d2-d3}, [r7, : 128]!
-	vst1.8		d4, [r7, : 64]
-	cmp		r5, #0
-	beq		.Lskipsquaringloop
-.Lsquaringloop:
-	add		r6, r3, #288
-	add		r7, r3, #288
-	add		r8, r3, #288
-	vmov.i32	q0, #19
-	vmov.i32	q1, #0
-	vmov.i32	q2, #1
-	vzip.i32	q1, q2
-	vld1.8		{d4-d5}, [r7, : 128]!
-	vld1.8		{d6-d7}, [r7, : 128]!
-	vld1.8		{d9}, [r7, : 64]
-	vld1.8		{d10-d11}, [r6, : 128]!
-	add		r7, sp, #384
-	vld1.8		{d12-d13}, [r6, : 128]!
-	vmul.i32	q7, q2, q0
-	vld1.8		{d8}, [r6, : 64]
-	vext.32		d17, d11, d10, #1
-	vmul.i32	q9, q3, q0
-	vext.32		d16, d10, d8, #1
-	vshl.u32	q10, q5, q1
-	vext.32		d22, d14, d4, #1
-	vext.32		d24, d18, d6, #1
-	vshl.u32	q13, q6, q1
-	vshl.u32	d28, d8, d2
-	vrev64.i32	d22, d22
-	vmul.i32	d1, d9, d1
-	vrev64.i32	d24, d24
-	vext.32		d29, d8, d13, #1
-	vext.32		d0, d1, d9, #1
-	vrev64.i32	d0, d0
-	vext.32		d2, d9, d1, #1
-	vext.32		d23, d15, d5, #1
-	vmull.s32	q4, d20, d4
-	vrev64.i32	d23, d23
-	vmlal.s32	q4, d21, d1
-	vrev64.i32	d2, d2
-	vmlal.s32	q4, d26, d19
-	vext.32		d3, d5, d15, #1
-	vmlal.s32	q4, d27, d18
-	vrev64.i32	d3, d3
-	vmlal.s32	q4, d28, d15
-	vext.32		d14, d12, d11, #1
-	vmull.s32	q5, d16, d23
-	vext.32		d15, d13, d12, #1
-	vmlal.s32	q5, d17, d4
-	vst1.8		d8, [r7, : 64]!
-	vmlal.s32	q5, d14, d1
-	vext.32		d12, d9, d8, #0
-	vmlal.s32	q5, d15, d19
-	vmov.i64	d13, #0
-	vmlal.s32	q5, d29, d18
-	vext.32		d25, d19, d7, #1
-	vmlal.s32	q6, d20, d5
-	vrev64.i32	d25, d25
-	vmlal.s32	q6, d21, d4
-	vst1.8		d11, [r7, : 64]!
-	vmlal.s32	q6, d26, d1
-	vext.32		d9, d10, d10, #0
-	vmlal.s32	q6, d27, d19
-	vmov.i64	d8, #0
-	vmlal.s32	q6, d28, d18
-	vmlal.s32	q4, d16, d24
-	vmlal.s32	q4, d17, d5
-	vmlal.s32	q4, d14, d4
-	vst1.8		d12, [r7, : 64]!
-	vmlal.s32	q4, d15, d1
-	vext.32		d10, d13, d12, #0
-	vmlal.s32	q4, d29, d19
-	vmov.i64	d11, #0
-	vmlal.s32	q5, d20, d6
-	vmlal.s32	q5, d21, d5
-	vmlal.s32	q5, d26, d4
-	vext.32		d13, d8, d8, #0
-	vmlal.s32	q5, d27, d1
-	vmov.i64	d12, #0
-	vmlal.s32	q5, d28, d19
-	vst1.8		d9, [r7, : 64]!
-	vmlal.s32	q6, d16, d25
-	vmlal.s32	q6, d17, d6
-	vst1.8		d10, [r7, : 64]
-	vmlal.s32	q6, d14, d5
-	vext.32		d8, d11, d10, #0
-	vmlal.s32	q6, d15, d4
-	vmov.i64	d9, #0
-	vmlal.s32	q6, d29, d1
-	vmlal.s32	q4, d20, d7
-	vmlal.s32	q4, d21, d6
-	vmlal.s32	q4, d26, d5
-	vext.32		d11, d12, d12, #0
-	vmlal.s32	q4, d27, d4
-	vmov.i64	d10, #0
-	vmlal.s32	q4, d28, d1
-	vmlal.s32	q5, d16, d0
-	sub		r6, r7, #32
-	vmlal.s32	q5, d17, d7
-	vmlal.s32	q5, d14, d6
-	vext.32		d30, d9, d8, #0
-	vmlal.s32	q5, d15, d5
-	vld1.8		{d31}, [r6, : 64]!
-	vmlal.s32	q5, d29, d4
-	vmlal.s32	q15, d20, d0
-	vext.32		d0, d6, d18, #1
-	vmlal.s32	q15, d21, d25
-	vrev64.i32	d0, d0
-	vmlal.s32	q15, d26, d24
-	vext.32		d1, d7, d19, #1
-	vext.32		d7, d10, d10, #0
-	vmlal.s32	q15, d27, d23
-	vrev64.i32	d1, d1
-	vld1.8		{d6}, [r6, : 64]
-	vmlal.s32	q15, d28, d22
-	vmlal.s32	q3, d16, d4
-	add		r6, r6, #24
-	vmlal.s32	q3, d17, d2
-	vext.32		d4, d31, d30, #0
-	vmov		d17, d11
-	vmlal.s32	q3, d14, d1
-	vext.32		d11, d13, d13, #0
-	vext.32		d13, d30, d30, #0
-	vmlal.s32	q3, d15, d0
-	vext.32		d1, d8, d8, #0
-	vmlal.s32	q3, d29, d3
-	vld1.8		{d5}, [r6, : 64]
-	sub		r6, r6, #16
-	vext.32		d10, d6, d6, #0
-	vmov.i32	q1, #0xffffffff
-	vshl.i64	q4, q1, #25
-	add		r7, sp, #480
-	vld1.8		{d14-d15}, [r7, : 128]
-	vadd.i64	q9, q2, q7
-	vshl.i64	q1, q1, #26
-	vshr.s64	q10, q9, #26
-	vld1.8		{d0}, [r6, : 64]!
-	vadd.i64	q5, q5, q10
-	vand		q9, q9, q1
-	vld1.8		{d16}, [r6, : 64]!
-	add		r6, sp, #496
-	vld1.8		{d20-d21}, [r6, : 128]
-	vadd.i64	q11, q5, q10
-	vsub.i64	q2, q2, q9
-	vshr.s64	q9, q11, #25
-	vext.32		d12, d5, d4, #0
-	vand		q11, q11, q4
-	vadd.i64	q0, q0, q9
-	vmov		d19, d7
-	vadd.i64	q3, q0, q7
-	vsub.i64	q5, q5, q11
-	vshr.s64	q11, q3, #26
-	vext.32		d18, d11, d10, #0
-	vand		q3, q3, q1
-	vadd.i64	q8, q8, q11
-	vadd.i64	q11, q8, q10
-	vsub.i64	q0, q0, q3
-	vshr.s64	q3, q11, #25
-	vand		q11, q11, q4
-	vadd.i64	q3, q6, q3
-	vadd.i64	q6, q3, q7
-	vsub.i64	q8, q8, q11
-	vshr.s64	q11, q6, #26
-	vand		q6, q6, q1
-	vadd.i64	q9, q9, q11
-	vadd.i64	d25, d19, d21
-	vsub.i64	q3, q3, q6
-	vshr.s64	d23, d25, #25
-	vand		q4, q12, q4
-	vadd.i64	d21, d23, d23
-	vshl.i64	d25, d23, #4
-	vadd.i64	d21, d21, d23
-	vadd.i64	d25, d25, d21
-	vadd.i64	d4, d4, d25
-	vzip.i32	q0, q8
-	vadd.i64	d12, d4, d14
-	add		r6, r8, #8
-	vst1.8		d0, [r6, : 64]
-	vsub.i64	d19, d19, d9
-	add		r6, r6, #16
-	vst1.8		d16, [r6, : 64]
-	vshr.s64	d22, d12, #26
-	vand		q0, q6, q1
-	vadd.i64	d10, d10, d22
-	vzip.i32	q3, q9
-	vsub.i64	d4, d4, d0
-	sub		r6, r6, #8
-	vst1.8		d6, [r6, : 64]
-	add		r6, r6, #16
-	vst1.8		d18, [r6, : 64]
-	vzip.i32	q2, q5
-	sub		r6, r6, #32
-	vst1.8		d4, [r6, : 64]
-	subs		r5, r5, #1
-	bhi		.Lsquaringloop
-.Lskipsquaringloop:
-	mov		r2, r2
-	add		r5, r3, #288
-	add		r6, r3, #144
-	vmov.i32	q0, #19
-	vmov.i32	q1, #0
-	vmov.i32	q2, #1
-	vzip.i32	q1, q2
-	vld1.8		{d4-d5}, [r5, : 128]!
-	vld1.8		{d6-d7}, [r5, : 128]!
-	vld1.8		{d9}, [r5, : 64]
-	vld1.8		{d10-d11}, [r2, : 128]!
-	add		r5, sp, #384
-	vld1.8		{d12-d13}, [r2, : 128]!
-	vmul.i32	q7, q2, q0
-	vld1.8		{d8}, [r2, : 64]
-	vext.32		d17, d11, d10, #1
-	vmul.i32	q9, q3, q0
-	vext.32		d16, d10, d8, #1
-	vshl.u32	q10, q5, q1
-	vext.32		d22, d14, d4, #1
-	vext.32		d24, d18, d6, #1
-	vshl.u32	q13, q6, q1
-	vshl.u32	d28, d8, d2
-	vrev64.i32	d22, d22
-	vmul.i32	d1, d9, d1
-	vrev64.i32	d24, d24
-	vext.32		d29, d8, d13, #1
-	vext.32		d0, d1, d9, #1
-	vrev64.i32	d0, d0
-	vext.32		d2, d9, d1, #1
-	vext.32		d23, d15, d5, #1
-	vmull.s32	q4, d20, d4
-	vrev64.i32	d23, d23
-	vmlal.s32	q4, d21, d1
-	vrev64.i32	d2, d2
-	vmlal.s32	q4, d26, d19
-	vext.32		d3, d5, d15, #1
-	vmlal.s32	q4, d27, d18
-	vrev64.i32	d3, d3
-	vmlal.s32	q4, d28, d15
-	vext.32		d14, d12, d11, #1
-	vmull.s32	q5, d16, d23
-	vext.32		d15, d13, d12, #1
-	vmlal.s32	q5, d17, d4
-	vst1.8		d8, [r5, : 64]!
-	vmlal.s32	q5, d14, d1
-	vext.32		d12, d9, d8, #0
-	vmlal.s32	q5, d15, d19
-	vmov.i64	d13, #0
-	vmlal.s32	q5, d29, d18
-	vext.32		d25, d19, d7, #1
-	vmlal.s32	q6, d20, d5
-	vrev64.i32	d25, d25
-	vmlal.s32	q6, d21, d4
-	vst1.8		d11, [r5, : 64]!
-	vmlal.s32	q6, d26, d1
-	vext.32		d9, d10, d10, #0
-	vmlal.s32	q6, d27, d19
-	vmov.i64	d8, #0
-	vmlal.s32	q6, d28, d18
-	vmlal.s32	q4, d16, d24
-	vmlal.s32	q4, d17, d5
-	vmlal.s32	q4, d14, d4
-	vst1.8		d12, [r5, : 64]!
-	vmlal.s32	q4, d15, d1
-	vext.32		d10, d13, d12, #0
-	vmlal.s32	q4, d29, d19
-	vmov.i64	d11, #0
-	vmlal.s32	q5, d20, d6
-	vmlal.s32	q5, d21, d5
-	vmlal.s32	q5, d26, d4
-	vext.32		d13, d8, d8, #0
-	vmlal.s32	q5, d27, d1
-	vmov.i64	d12, #0
-	vmlal.s32	q5, d28, d19
-	vst1.8		d9, [r5, : 64]!
-	vmlal.s32	q6, d16, d25
-	vmlal.s32	q6, d17, d6
-	vst1.8		d10, [r5, : 64]
-	vmlal.s32	q6, d14, d5
-	vext.32		d8, d11, d10, #0
-	vmlal.s32	q6, d15, d4
-	vmov.i64	d9, #0
-	vmlal.s32	q6, d29, d1
-	vmlal.s32	q4, d20, d7
-	vmlal.s32	q4, d21, d6
-	vmlal.s32	q4, d26, d5
-	vext.32		d11, d12, d12, #0
-	vmlal.s32	q4, d27, d4
-	vmov.i64	d10, #0
-	vmlal.s32	q4, d28, d1
-	vmlal.s32	q5, d16, d0
-	sub		r2, r5, #32
-	vmlal.s32	q5, d17, d7
-	vmlal.s32	q5, d14, d6
-	vext.32		d30, d9, d8, #0
-	vmlal.s32	q5, d15, d5
-	vld1.8		{d31}, [r2, : 64]!
-	vmlal.s32	q5, d29, d4
-	vmlal.s32	q15, d20, d0
-	vext.32		d0, d6, d18, #1
-	vmlal.s32	q15, d21, d25
-	vrev64.i32	d0, d0
-	vmlal.s32	q15, d26, d24
-	vext.32		d1, d7, d19, #1
-	vext.32		d7, d10, d10, #0
-	vmlal.s32	q15, d27, d23
-	vrev64.i32	d1, d1
-	vld1.8		{d6}, [r2, : 64]
-	vmlal.s32	q15, d28, d22
-	vmlal.s32	q3, d16, d4
-	add		r2, r2, #24
-	vmlal.s32	q3, d17, d2
-	vext.32		d4, d31, d30, #0
-	vmov		d17, d11
-	vmlal.s32	q3, d14, d1
-	vext.32		d11, d13, d13, #0
-	vext.32		d13, d30, d30, #0
-	vmlal.s32	q3, d15, d0
-	vext.32		d1, d8, d8, #0
-	vmlal.s32	q3, d29, d3
-	vld1.8		{d5}, [r2, : 64]
-	sub		r2, r2, #16
-	vext.32		d10, d6, d6, #0
-	vmov.i32	q1, #0xffffffff
-	vshl.i64	q4, q1, #25
-	add		r5, sp, #480
-	vld1.8		{d14-d15}, [r5, : 128]
-	vadd.i64	q9, q2, q7
-	vshl.i64	q1, q1, #26
-	vshr.s64	q10, q9, #26
-	vld1.8		{d0}, [r2, : 64]!
-	vadd.i64	q5, q5, q10
-	vand		q9, q9, q1
-	vld1.8		{d16}, [r2, : 64]!
-	add		r2, sp, #496
-	vld1.8		{d20-d21}, [r2, : 128]
-	vadd.i64	q11, q5, q10
-	vsub.i64	q2, q2, q9
-	vshr.s64	q9, q11, #25
-	vext.32		d12, d5, d4, #0
-	vand		q11, q11, q4
-	vadd.i64	q0, q0, q9
-	vmov		d19, d7
-	vadd.i64	q3, q0, q7
-	vsub.i64	q5, q5, q11
-	vshr.s64	q11, q3, #26
-	vext.32		d18, d11, d10, #0
-	vand		q3, q3, q1
-	vadd.i64	q8, q8, q11
-	vadd.i64	q11, q8, q10
-	vsub.i64	q0, q0, q3
-	vshr.s64	q3, q11, #25
-	vand		q11, q11, q4
-	vadd.i64	q3, q6, q3
-	vadd.i64	q6, q3, q7
-	vsub.i64	q8, q8, q11
-	vshr.s64	q11, q6, #26
-	vand		q6, q6, q1
-	vadd.i64	q9, q9, q11
-	vadd.i64	d25, d19, d21
-	vsub.i64	q3, q3, q6
-	vshr.s64	d23, d25, #25
-	vand		q4, q12, q4
-	vadd.i64	d21, d23, d23
-	vshl.i64	d25, d23, #4
-	vadd.i64	d21, d21, d23
-	vadd.i64	d25, d25, d21
-	vadd.i64	d4, d4, d25
-	vzip.i32	q0, q8
-	vadd.i64	d12, d4, d14
-	add		r2, r6, #8
-	vst1.8		d0, [r2, : 64]
-	vsub.i64	d19, d19, d9
-	add		r2, r2, #16
-	vst1.8		d16, [r2, : 64]
-	vshr.s64	d22, d12, #26
-	vand		q0, q6, q1
-	vadd.i64	d10, d10, d22
-	vzip.i32	q3, q9
-	vsub.i64	d4, d4, d0
-	sub		r2, r2, #8
-	vst1.8		d6, [r2, : 64]
-	add		r2, r2, #16
-	vst1.8		d18, [r2, : 64]
-	vzip.i32	q2, q5
-	sub		r2, r2, #32
-	vst1.8		d4, [r2, : 64]
-	cmp		r4, #0
-	beq		.Lskippostcopy
-	add		r2, r3, #144
-	mov		r4, r4
-	vld1.8		{d0-d1}, [r2, : 128]!
-	vld1.8		{d2-d3}, [r2, : 128]!
-	vld1.8		{d4}, [r2, : 64]
-	vst1.8		{d0-d1}, [r4, : 128]!
-	vst1.8		{d2-d3}, [r4, : 128]!
-	vst1.8		d4, [r4, : 64]
-.Lskippostcopy:
-	cmp		r1, #1
-	bne		.Lskipfinalcopy
-	add		r2, r3, #288
-	add		r4, r3, #144
-	vld1.8		{d0-d1}, [r2, : 128]!
-	vld1.8		{d2-d3}, [r2, : 128]!
-	vld1.8		{d4}, [r2, : 64]
-	vst1.8		{d0-d1}, [r4, : 128]!
-	vst1.8		{d2-d3}, [r4, : 128]!
-	vst1.8		d4, [r4, : 64]
-.Lskipfinalcopy:
-	add		r1, r1, #1
-	cmp		r1, #12
-	blo		.Linvertloop
-	add		r1, r3, #144
-	ldr		r2, [r1], #4
-	ldr		r3, [r1], #4
-	ldr		r4, [r1], #4
-	ldr		r5, [r1], #4
-	ldr		r6, [r1], #4
-	ldr		r7, [r1], #4
-	ldr		r8, [r1], #4
-	ldr		r9, [r1], #4
-	ldr		r10, [r1], #4
-	ldr		r1, [r1]
-	add		r11, r1, r1, LSL #4
-	add		r11, r11, r1, LSL #1
-	add		r11, r11, #16777216
-	mov		r11, r11, ASR #25
-	add		r11, r11, r2
-	mov		r11, r11, ASR #26
-	add		r11, r11, r3
-	mov		r11, r11, ASR #25
-	add		r11, r11, r4
-	mov		r11, r11, ASR #26
-	add		r11, r11, r5
-	mov		r11, r11, ASR #25
-	add		r11, r11, r6
-	mov		r11, r11, ASR #26
-	add		r11, r11, r7
-	mov		r11, r11, ASR #25
-	add		r11, r11, r8
-	mov		r11, r11, ASR #26
-	add		r11, r11, r9
-	mov		r11, r11, ASR #25
-	add		r11, r11, r10
-	mov		r11, r11, ASR #26
-	add		r11, r11, r1
-	mov		r11, r11, ASR #25
-	add		r2, r2, r11
-	add		r2, r2, r11, LSL #1
-	add		r2, r2, r11, LSL #4
-	mov		r11, r2, ASR #26
-	add		r3, r3, r11
-	sub		r2, r2, r11, LSL #26
-	mov		r11, r3, ASR #25
-	add		r4, r4, r11
-	sub		r3, r3, r11, LSL #25
-	mov		r11, r4, ASR #26
-	add		r5, r5, r11
-	sub		r4, r4, r11, LSL #26
-	mov		r11, r5, ASR #25
-	add		r6, r6, r11
-	sub		r5, r5, r11, LSL #25
-	mov		r11, r6, ASR #26
-	add		r7, r7, r11
-	sub		r6, r6, r11, LSL #26
-	mov		r11, r7, ASR #25
-	add		r8, r8, r11
-	sub		r7, r7, r11, LSL #25
-	mov		r11, r8, ASR #26
-	add		r9, r9, r11
-	sub		r8, r8, r11, LSL #26
-	mov		r11, r9, ASR #25
-	add		r10, r10, r11
-	sub		r9, r9, r11, LSL #25
-	mov		r11, r10, ASR #26
-	add		r1, r1, r11
-	sub		r10, r10, r11, LSL #26
-	mov		r11, r1, ASR #25
-	sub		r1, r1, r11, LSL #25
-	add		r2, r2, r3, LSL #26
-	mov		r3, r3, LSR #6
-	add		r3, r3, r4, LSL #19
-	mov		r4, r4, LSR #13
-	add		r4, r4, r5, LSL #13
-	mov		r5, r5, LSR #19
-	add		r5, r5, r6, LSL #6
-	add		r6, r7, r8, LSL #25
-	mov		r7, r8, LSR #7
-	add		r7, r7, r9, LSL #19
-	mov		r8, r9, LSR #13
-	add		r8, r8, r10, LSL #12
-	mov		r9, r10, LSR #20
-	add		r1, r9, r1, LSL #6
-	str		r2, [r0]
-	str		r3, [r0, #4]
-	str		r4, [r0, #8]
-	str		r5, [r0, #12]
-	str		r6, [r0, #16]
-	str		r7, [r0, #20]
-	str		r8, [r0, #24]
-	str		r1, [r0, #28]
-	movw		r0, #0
-	mov		sp, ip
-	pop		{r4-r11, pc}
-ENDPROC(curve25519_neon)
diff --git a/arch/arm/crypto/curve25519-glue.c b/arch/arm/crypto/curve25519-glue.c
deleted file mode 100644
index 9bdafd57888c..000000000000
--- a/arch/arm/crypto/curve25519-glue.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
- *
- * Based on public domain code from Daniel J. Bernstein and Peter Schwabe. This
- * began from SUPERCOP's curve25519/neon2/scalarmult.s, but has subsequently been
- * manually reworked for use in kernel space.
- */
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <crypto/internal/kpp.h>
-#include <crypto/internal/simd.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/jump_label.h>
-#include <linux/scatterlist.h>
-#include <crypto/curve25519.h>
-
-asmlinkage void curve25519_neon(u8 mypublic[CURVE25519_KEY_SIZE],
-				const u8 secret[CURVE25519_KEY_SIZE],
-				const u8 basepoint[CURVE25519_KEY_SIZE]);
-
-static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
-
-void curve25519_arch(u8 out[CURVE25519_KEY_SIZE],
-		     const u8 scalar[CURVE25519_KEY_SIZE],
-		     const u8 point[CURVE25519_KEY_SIZE])
-{
-	if (static_branch_likely(&have_neon) && crypto_simd_usable()) {
-		kernel_neon_begin();
-		curve25519_neon(out, scalar, point);
-		kernel_neon_end();
-	} else {
-		curve25519_generic(out, scalar, point);
-	}
-}
-EXPORT_SYMBOL(curve25519_arch);
-
-void curve25519_base_arch(u8 pub[CURVE25519_KEY_SIZE],
-			  const u8 secret[CURVE25519_KEY_SIZE])
-{
-	return curve25519_arch(pub, secret, curve25519_base_point);
-}
-EXPORT_SYMBOL(curve25519_base_arch);
-
-static int curve25519_set_secret(struct crypto_kpp *tfm, const void *buf,
-				 unsigned int len)
-{
-	u8 *secret = kpp_tfm_ctx(tfm);
-
-	if (!len)
-		curve25519_generate_secret(secret);
-	else if (len == CURVE25519_KEY_SIZE &&
-		 crypto_memneq(buf, curve25519_null_point, CURVE25519_KEY_SIZE))
-		memcpy(secret, buf, CURVE25519_KEY_SIZE);
-	else
-		return -EINVAL;
-	return 0;
-}
-
-static int curve25519_compute_value(struct kpp_request *req)
-{
-	struct crypto_kpp *tfm = crypto_kpp_reqtfm(req);
-	const u8 *secret = kpp_tfm_ctx(tfm);
-	u8 public_key[CURVE25519_KEY_SIZE];
-	u8 buf[CURVE25519_KEY_SIZE];
-	int copied, nbytes;
-	u8 const *bp;
-
-	if (req->src) {
-		copied = sg_copy_to_buffer(req->src,
-					   sg_nents_for_len(req->src,
-							    CURVE25519_KEY_SIZE),
-					   public_key, CURVE25519_KEY_SIZE);
-		if (copied != CURVE25519_KEY_SIZE)
-			return -EINVAL;
-		bp = public_key;
-	} else {
-		bp = curve25519_base_point;
-	}
-
-	curve25519_arch(buf, secret, bp);
-
-	/* might want less than we've got */
-	nbytes = min_t(size_t, CURVE25519_KEY_SIZE, req->dst_len);
-	copied = sg_copy_from_buffer(req->dst, sg_nents_for_len(req->dst,
-								nbytes),
-				     buf, nbytes);
-	if (copied != nbytes)
-		return -EINVAL;
-	return 0;
-}
-
-static unsigned int curve25519_max_size(struct crypto_kpp *tfm)
-{
-	return CURVE25519_KEY_SIZE;
-}
-
-static struct kpp_alg curve25519_alg = {
-	.base.cra_name		= "curve25519",
-	.base.cra_driver_name	= "curve25519-neon",
-	.base.cra_priority	= 200,
-	.base.cra_module	= THIS_MODULE,
-	.base.cra_ctxsize	= CURVE25519_KEY_SIZE,
-
-	.set_secret		= curve25519_set_secret,
-	.generate_public_key	= curve25519_compute_value,
-	.compute_shared_secret	= curve25519_compute_value,
-	.max_size		= curve25519_max_size,
-};
-
-static int __init arm_curve25519_init(void)
-{
-	if (elf_hwcap & HWCAP_NEON) {
-		static_branch_enable(&have_neon);
-		return IS_REACHABLE(CONFIG_CRYPTO_KPP) ?
-			crypto_register_kpp(&curve25519_alg) : 0;
-	}
-	return 0;
-}
-
-static void __exit arm_curve25519_exit(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_KPP) && elf_hwcap & HWCAP_NEON)
-		crypto_unregister_kpp(&curve25519_alg);
-}
-
-module_init(arm_curve25519_init);
-module_exit(arm_curve25519_exit);
-
-MODULE_ALIAS_CRYPTO("curve25519");
-MODULE_ALIAS_CRYPTO("curve25519-neon");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/crypto/ghash-ce-core.S b/arch/arm/crypto/ghash-ce-core.S
index 9f51e3fa4526..858c0d66798b 100644
--- a/arch/arm/crypto/ghash-ce-core.S
+++ b/arch/arm/crypto/ghash-ce-core.S
@@ -2,7 +2,8 @@
 /*
  * Accelerated GHASH implementation with NEON/ARMv8 vmull.p8/64 instructions.
  *
- * Copyright (C) 2015 - 2017 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ * Copyright (C) 2015 - 2017 Linaro Ltd.
+ * Copyright (C) 2023 Google LLC. <ardb@google.com>
  */
 
 #include <linux/linkage.h>
@@ -44,7 +45,7 @@
 	t2q		.req	q7
 	t3q		.req	q8
 	t4q		.req	q9
-	T2		.req	q9
+	XH2		.req	q9
 
 	s1l		.req	d20
 	s1h		.req	d21
@@ -80,7 +81,7 @@
 
 	XL2		.req	q5
 	XM2		.req	q6
-	XH2		.req	q7
+	T2		.req	q7
 	T3		.req	q8
 
 	XL2_L		.req	d10
@@ -192,9 +193,10 @@
 	vshr.u64	XL, XL, #1
 	.endm
 
-	.macro		ghash_update, pn
+	.macro		ghash_update, pn, enc, aggregate=1, head=1
 	vld1.64		{XL}, [r1]
 
+	.if		\head
 	/* do the head block first, if supplied */
 	ldr		ip, [sp]
 	teq		ip, #0
@@ -202,13 +204,32 @@
 	vld1.64		{T1}, [ip]
 	teq		r0, #0
 	b		3f
+	.endif
 
 0:	.ifc		\pn, p64
+	.if		\aggregate
 	tst		r0, #3			// skip until #blocks is a
 	bne		2f			// round multiple of 4
 
 	vld1.8		{XL2-XM2}, [r2]!
-1:	vld1.8		{T3-T2}, [r2]!
+1:	vld1.8		{T2-T3}, [r2]!
+
+	.ifnb		\enc
+	\enc\()_4x	XL2, XM2, T2, T3
+
+	add		ip, r3, #16
+	vld1.64		{HH}, [ip, :128]!
+	vld1.64		{HH3-HH4}, [ip, :128]
+
+	veor		SHASH2_p64, SHASH_L, SHASH_H
+	veor		SHASH2_H, HH_L, HH_H
+	veor		HH34_L, HH3_L, HH3_H
+	veor		HH34_H, HH4_L, HH4_H
+
+	vmov.i8		MASK, #0xe1
+	vshl.u64	MASK, MASK, #57
+	.endif
+
 	vrev64.8	XL2, XL2
 	vrev64.8	XM2, XM2
 
@@ -218,8 +239,8 @@
 	veor		XL2_H, XL2_H, XL_L
 	veor		XL, XL, T1
 
-	vrev64.8	T3, T3
-	vrev64.8	T1, T2
+	vrev64.8	T1, T3
+	vrev64.8	T3, T2
 
 	vmull.p64	XH, HH4_H, XL_H			// a1 * b1
 	veor		XL2_H, XL2_H, XL_H
@@ -267,14 +288,22 @@
 
 	b		1b
 	.endif
+	.endif
+
+2:	vld1.8		{T1}, [r2]!
+
+	.ifnb		\enc
+	\enc\()_1x	T1
+	veor		SHASH2_p64, SHASH_L, SHASH_H
+	vmov.i8		MASK, #0xe1
+	vshl.u64	MASK, MASK, #57
+	.endif
 
-2:	vld1.64		{T1}, [r2]!
 	subs		r0, r0, #1
 
 3:	/* multiply XL by SHASH in GF(2^128) */
-#ifndef CONFIG_CPU_BIG_ENDIAN
 	vrev64.8	T1, T1
-#endif
+
 	vext.8		IN1, T1, T1, #8
 	veor		T1_L, T1_L, XL_H
 	veor		XL, XL, IN1
@@ -293,9 +322,6 @@
 	veor		XL, XL, T1
 
 	bne		0b
-
-	vst1.64		{XL}, [r1]
-	bx		lr
 	.endm
 
 	/*
@@ -316,6 +342,9 @@ ENTRY(pmull_ghash_update_p64)
 	vshl.u64	MASK, MASK, #57
 
 	ghash_update	p64
+	vst1.64		{XL}, [r1]
+
+	bx		lr
 ENDPROC(pmull_ghash_update_p64)
 
 ENTRY(pmull_ghash_update_p8)
@@ -336,4 +365,331 @@ ENTRY(pmull_ghash_update_p8)
 	vmov.i64	k48, #0xffffffffffff
 
 	ghash_update	p8
+	vst1.64		{XL}, [r1]
+
+	bx		lr
 ENDPROC(pmull_ghash_update_p8)
+
+	e0		.req	q9
+	e1		.req	q10
+	e2		.req	q11
+	e3		.req	q12
+	e0l		.req	d18
+	e0h		.req	d19
+	e2l		.req	d22
+	e2h		.req	d23
+	e3l		.req	d24
+	e3h		.req	d25
+	ctr		.req	q13
+	ctr0		.req	d26
+	ctr1		.req	d27
+
+	ek0		.req	q14
+	ek1		.req	q15
+
+	.macro		round, rk:req, regs:vararg
+	.irp		r, \regs
+	aese.8		\r, \rk
+	aesmc.8		\r, \r
+	.endr
+	.endm
+
+	.macro		aes_encrypt, rkp, rounds, regs:vararg
+	vld1.8		{ek0-ek1}, [\rkp, :128]!
+	cmp		\rounds, #12
+	blt		.L\@			// AES-128
+
+	round		ek0, \regs
+	vld1.8		{ek0}, [\rkp, :128]!
+	round		ek1, \regs
+	vld1.8		{ek1}, [\rkp, :128]!
+
+	beq		.L\@			// AES-192
+
+	round		ek0, \regs
+	vld1.8		{ek0}, [\rkp, :128]!
+	round		ek1, \regs
+	vld1.8		{ek1}, [\rkp, :128]!
+
+.L\@:	.rept		4
+	round		ek0, \regs
+	vld1.8		{ek0}, [\rkp, :128]!
+	round		ek1, \regs
+	vld1.8		{ek1}, [\rkp, :128]!
+	.endr
+
+	round		ek0, \regs
+	vld1.8		{ek0}, [\rkp, :128]
+
+	.irp		r, \regs
+	aese.8		\r, ek1
+	.endr
+	.irp		r, \regs
+	veor		\r, \r, ek0
+	.endr
+	.endm
+
+pmull_aes_encrypt:
+	add		ip, r5, #4
+	vld1.8		{ctr0}, [r5]		// load 12 byte IV
+	vld1.8		{ctr1}, [ip]
+	rev		r8, r7
+	vext.8		ctr1, ctr1, ctr1, #4
+	add		r7, r7, #1
+	vmov.32		ctr1[1], r8
+	vmov		e0, ctr
+
+	add		ip, r3, #64
+	aes_encrypt	ip, r6, e0
+	bx		lr
+ENDPROC(pmull_aes_encrypt)
+
+pmull_aes_encrypt_4x:
+	add		ip, r5, #4
+	vld1.8		{ctr0}, [r5]
+	vld1.8		{ctr1}, [ip]
+	rev		r8, r7
+	vext.8		ctr1, ctr1, ctr1, #4
+	add		r7, r7, #1
+	vmov.32		ctr1[1], r8
+	rev		ip, r7
+	vmov		e0, ctr
+	add		r7, r7, #1
+	vmov.32		ctr1[1], ip
+	rev		r8, r7
+	vmov		e1, ctr
+	add		r7, r7, #1
+	vmov.32		ctr1[1], r8
+	rev		ip, r7
+	vmov		e2, ctr
+	add		r7, r7, #1
+	vmov.32		ctr1[1], ip
+	vmov		e3, ctr
+
+	add		ip, r3, #64
+	aes_encrypt	ip, r6, e0, e1, e2, e3
+	bx		lr
+ENDPROC(pmull_aes_encrypt_4x)
+
+pmull_aes_encrypt_final:
+	add		ip, r5, #4
+	vld1.8		{ctr0}, [r5]
+	vld1.8		{ctr1}, [ip]
+	rev		r8, r7
+	vext.8		ctr1, ctr1, ctr1, #4
+	mov		r7, #1 << 24		// BE #1 for the tag
+	vmov.32		ctr1[1], r8
+	vmov		e0, ctr
+	vmov.32		ctr1[1], r7
+	vmov		e1, ctr
+
+	add		ip, r3, #64
+	aes_encrypt	ip, r6, e0, e1
+	bx		lr
+ENDPROC(pmull_aes_encrypt_final)
+
+	.macro		enc_1x, in0
+	bl		pmull_aes_encrypt
+	veor		\in0, \in0, e0
+	vst1.8		{\in0}, [r4]!
+	.endm
+
+	.macro		dec_1x, in0
+	bl		pmull_aes_encrypt
+	veor		e0, e0, \in0
+	vst1.8		{e0}, [r4]!
+	.endm
+
+	.macro		enc_4x, in0, in1, in2, in3
+	bl		pmull_aes_encrypt_4x
+
+	veor		\in0, \in0, e0
+	veor		\in1, \in1, e1
+	veor		\in2, \in2, e2
+	veor		\in3, \in3, e3
+
+	vst1.8		{\in0-\in1}, [r4]!
+	vst1.8		{\in2-\in3}, [r4]!
+	.endm
+
+	.macro		dec_4x, in0, in1, in2, in3
+	bl		pmull_aes_encrypt_4x
+
+	veor		e0, e0, \in0
+	veor		e1, e1, \in1
+	veor		e2, e2, \in2
+	veor		e3, e3, \in3
+
+	vst1.8		{e0-e1}, [r4]!
+	vst1.8		{e2-e3}, [r4]!
+	.endm
+
+	/*
+	 * void pmull_gcm_encrypt(int blocks, u64 dg[], const char *src,
+	 *			  struct gcm_key const *k, char *dst,
+	 *			  char *iv, int rounds, u32 counter)
+	 */
+ENTRY(pmull_gcm_encrypt)
+	push		{r4-r8, lr}
+	ldrd		r4, r5, [sp, #24]
+	ldrd		r6, r7, [sp, #32]
+
+	vld1.64		{SHASH}, [r3]
+
+	ghash_update	p64, enc, head=0
+	vst1.64		{XL}, [r1]
+
+	pop		{r4-r8, pc}
+ENDPROC(pmull_gcm_encrypt)
+
+	/*
+	 * void pmull_gcm_decrypt(int blocks, u64 dg[], const char *src,
+	 *			  struct gcm_key const *k, char *dst,
+	 *			  char *iv, int rounds, u32 counter)
+	 */
+ENTRY(pmull_gcm_decrypt)
+	push		{r4-r8, lr}
+	ldrd		r4, r5, [sp, #24]
+	ldrd		r6, r7, [sp, #32]
+
+	vld1.64		{SHASH}, [r3]
+
+	ghash_update	p64, dec, head=0
+	vst1.64		{XL}, [r1]
+
+	pop		{r4-r8, pc}
+ENDPROC(pmull_gcm_decrypt)
+
+	/*
+	 * void pmull_gcm_enc_final(int bytes, u64 dg[], char *tag,
+	 *			    struct gcm_key const *k, char *head,
+	 *			    char *iv, int rounds, u32 counter)
+	 */
+ENTRY(pmull_gcm_enc_final)
+	push		{r4-r8, lr}
+	ldrd		r4, r5, [sp, #24]
+	ldrd		r6, r7, [sp, #32]
+
+	bl		pmull_aes_encrypt_final
+
+	cmp		r0, #0
+	beq		.Lenc_final
+
+	mov_l		ip, .Lpermute
+	sub		r4, r4, #16
+	add		r8, ip, r0
+	add		ip, ip, #32
+	add		r4, r4, r0
+	sub		ip, ip, r0
+
+	vld1.8		{e3}, [r8]		// permute vector for key stream
+	vld1.8		{e2}, [ip]		// permute vector for ghash input
+
+	vtbl.8		e3l, {e0}, e3l
+	vtbl.8		e3h, {e0}, e3h
+
+	vld1.8		{e0}, [r4]		// encrypt tail block
+	veor		e0, e0, e3
+	vst1.8		{e0}, [r4]
+
+	vtbl.8		T1_L, {e0}, e2l
+	vtbl.8		T1_H, {e0}, e2h
+
+	vld1.64		{XL}, [r1]
+.Lenc_final:
+	vld1.64		{SHASH}, [r3, :128]
+	vmov.i8		MASK, #0xe1
+	veor		SHASH2_p64, SHASH_L, SHASH_H
+	vshl.u64	MASK, MASK, #57
+	mov		r0, #1
+	bne		3f			// process head block first
+	ghash_update	p64, aggregate=0, head=0
+
+	vrev64.8	XL, XL
+	vext.8		XL, XL, XL, #8
+	veor		XL, XL, e1
+
+	sub		r2, r2, #16		// rewind src pointer
+	vst1.8		{XL}, [r2]		// store tag
+
+	pop		{r4-r8, pc}
+ENDPROC(pmull_gcm_enc_final)
+
+	/*
+	 * int pmull_gcm_dec_final(int bytes, u64 dg[], char *tag,
+	 *			   struct gcm_key const *k, char *head,
+	 *			   char *iv, int rounds, u32 counter,
+	 *			   const char *otag, int authsize)
+	 */
+ENTRY(pmull_gcm_dec_final)
+	push		{r4-r8, lr}
+	ldrd		r4, r5, [sp, #24]
+	ldrd		r6, r7, [sp, #32]
+
+	bl		pmull_aes_encrypt_final
+
+	cmp		r0, #0
+	beq		.Ldec_final
+
+	mov_l		ip, .Lpermute
+	sub		r4, r4, #16
+	add		r8, ip, r0
+	add		ip, ip, #32
+	add		r4, r4, r0
+	sub		ip, ip, r0
+
+	vld1.8		{e3}, [r8]		// permute vector for key stream
+	vld1.8		{e2}, [ip]		// permute vector for ghash input
+
+	vtbl.8		e3l, {e0}, e3l
+	vtbl.8		e3h, {e0}, e3h
+
+	vld1.8		{e0}, [r4]
+
+	vtbl.8		T1_L, {e0}, e2l
+	vtbl.8		T1_H, {e0}, e2h
+
+	veor		e0, e0, e3
+	vst1.8		{e0}, [r4]
+
+	vld1.64		{XL}, [r1]
+.Ldec_final:
+	vld1.64		{SHASH}, [r3]
+	vmov.i8		MASK, #0xe1
+	veor		SHASH2_p64, SHASH_L, SHASH_H
+	vshl.u64	MASK, MASK, #57
+	mov		r0, #1
+	bne		3f			// process head block first
+	ghash_update	p64, aggregate=0, head=0
+
+	vrev64.8	XL, XL
+	vext.8		XL, XL, XL, #8
+	veor		XL, XL, e1
+
+	mov_l		ip, .Lpermute
+	ldrd		r2, r3, [sp, #40]	// otag and authsize
+	vld1.8		{T1}, [r2]
+	add		ip, ip, r3
+	vceq.i8		T1, T1, XL		// compare tags
+	vmvn		T1, T1			// 0 for eq, -1 for ne
+
+	vld1.8		{e0}, [ip]
+	vtbl.8		XL_L, {T1}, e0l		// keep authsize bytes only
+	vtbl.8		XL_H, {T1}, e0h
+
+	vpmin.s8	XL_L, XL_L, XL_H	// take the minimum s8 across the vector
+	vpmin.s8	XL_L, XL_L, XL_L
+	vmov.32		r0, XL_L[0]		// fail if != 0x0
+
+	pop		{r4-r8, pc}
+ENDPROC(pmull_gcm_dec_final)
+
+	.section	".rodata", "a", %progbits
+	.align		5
+.Lpermute:
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
+	.byte		0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
diff --git a/arch/arm/crypto/ghash-ce-glue.c b/arch/arm/crypto/ghash-ce-glue.c
index f13401f3e669..a52dcc8c1e33 100644
--- a/arch/arm/crypto/ghash-ce-glue.c
+++ b/arch/arm/crypto/ghash-ce-glue.c
@@ -2,44 +2,52 @@
 /*
  * Accelerated GHASH implementation with ARMv8 vmull.p64 instructions.
  *
- * Copyright (C) 2015 - 2018 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ * Copyright (C) 2015 - 2018 Linaro Ltd.
+ * Copyright (C) 2023 Google LLC.
  */
 
 #include <asm/hwcap.h>
 #include <asm/neon.h>
-#include <asm/simd.h>
-#include <asm/unaligned.h>
+#include <crypto/aes.h>
 #include <crypto/b128ops.h>
-#include <crypto/cryptd.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
+#include <crypto/gcm.h>
 #include <crypto/gf128mul.h>
+#include <crypto/ghash.h>
+#include <crypto/internal/aead.h>
+#include <crypto/internal/hash.h>
+#include <crypto/internal/skcipher.h>
+#include <crypto/scatterwalk.h>
 #include <linux/cpufeature.h>
-#include <linux/crypto.h>
+#include <linux/errno.h>
 #include <linux/jump_label.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/string.h>
+#include <linux/unaligned.h>
 
 MODULE_DESCRIPTION("GHASH hash function using ARMv8 Crypto Extensions");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ard Biesheuvel <ardb@kernel.org>");
+MODULE_LICENSE("GPL");
 MODULE_ALIAS_CRYPTO("ghash");
+MODULE_ALIAS_CRYPTO("gcm(aes)");
+MODULE_ALIAS_CRYPTO("rfc4106(gcm(aes))");
 
-#define GHASH_BLOCK_SIZE	16
-#define GHASH_DIGEST_SIZE	16
+#define RFC4106_NONCE_SIZE	4
 
 struct ghash_key {
 	be128	k;
 	u64	h[][2];
 };
 
-struct ghash_desc_ctx {
-	u64 digest[GHASH_DIGEST_SIZE/sizeof(u64)];
-	u8 buf[GHASH_BLOCK_SIZE];
-	u32 count;
+struct gcm_key {
+	u64	h[4][2];
+	u32	rk[AES_MAX_KEYLENGTH_U32];
+	int	rounds;
+	u8	nonce[];	// for RFC4106 nonce
 };
 
-struct ghash_async_ctx {
-	struct cryptd_ahash *cryptd_tfm;
+struct arm_ghash_desc_ctx {
+	u64 digest[GHASH_DIGEST_SIZE/sizeof(u64)];
 };
 
 asmlinkage void pmull_ghash_update_p64(int blocks, u64 dg[], const char *src,
@@ -52,94 +60,69 @@ static __ro_after_init DEFINE_STATIC_KEY_FALSE(use_p64);
 
 static int ghash_init(struct shash_desc *desc)
 {
-	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
 
-	*ctx = (struct ghash_desc_ctx){};
+	*ctx = (struct arm_ghash_desc_ctx){};
 	return 0;
 }
 
 static void ghash_do_update(int blocks, u64 dg[], const char *src,
 			    struct ghash_key *key, const char *head)
 {
-	if (likely(crypto_simd_usable())) {
-		kernel_neon_begin();
-		if (static_branch_likely(&use_p64))
-			pmull_ghash_update_p64(blocks, dg, src, key->h, head);
-		else
-			pmull_ghash_update_p8(blocks, dg, src, key->h, head);
-		kernel_neon_end();
-	} else {
-		be128 dst = { cpu_to_be64(dg[1]), cpu_to_be64(dg[0]) };
-
-		do {
-			const u8 *in = src;
-
-			if (head) {
-				in = head;
-				blocks++;
-				head = NULL;
-			} else {
-				src += GHASH_BLOCK_SIZE;
-			}
-
-			crypto_xor((u8 *)&dst, in, GHASH_BLOCK_SIZE);
-			gf128mul_lle(&dst, &key->k);
-		} while (--blocks);
-
-		dg[0] = be64_to_cpu(dst.b);
-		dg[1] = be64_to_cpu(dst.a);
-	}
+	kernel_neon_begin();
+	if (static_branch_likely(&use_p64))
+		pmull_ghash_update_p64(blocks, dg, src, key->h, head);
+	else
+		pmull_ghash_update_p8(blocks, dg, src, key->h, head);
+	kernel_neon_end();
 }
 
 static int ghash_update(struct shash_desc *desc, const u8 *src,
 			unsigned int len)
 {
-	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
-	unsigned int partial = ctx->count % GHASH_BLOCK_SIZE;
-
-	ctx->count += len;
+	struct ghash_key *key = crypto_shash_ctx(desc->tfm);
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	int blocks;
 
-	if ((partial + len) >= GHASH_BLOCK_SIZE) {
-		struct ghash_key *key = crypto_shash_ctx(desc->tfm);
-		int blocks;
+	blocks = len / GHASH_BLOCK_SIZE;
+	ghash_do_update(blocks, ctx->digest, src, key, NULL);
+	return len - blocks * GHASH_BLOCK_SIZE;
+}
 
-		if (partial) {
-			int p = GHASH_BLOCK_SIZE - partial;
+static int ghash_export(struct shash_desc *desc, void *out)
+{
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	u8 *dst = out;
 
-			memcpy(ctx->buf + partial, src, p);
-			src += p;
-			len -= p;
-		}
+	put_unaligned_be64(ctx->digest[1], dst);
+	put_unaligned_be64(ctx->digest[0], dst + 8);
+	return 0;
+}
 
-		blocks = len / GHASH_BLOCK_SIZE;
-		len %= GHASH_BLOCK_SIZE;
+static int ghash_import(struct shash_desc *desc, const void *in)
+{
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	const u8 *src = in;
 
-		ghash_do_update(blocks, ctx->digest, src, key,
-				partial ? ctx->buf : NULL);
-		src += blocks * GHASH_BLOCK_SIZE;
-		partial = 0;
-	}
-	if (len)
-		memcpy(ctx->buf + partial, src, len);
+	ctx->digest[1] = get_unaligned_be64(src);
+	ctx->digest[0] = get_unaligned_be64(src + 8);
 	return 0;
 }
 
-static int ghash_final(struct shash_desc *desc, u8 *dst)
+static int ghash_finup(struct shash_desc *desc, const u8 *src,
+		       unsigned int len, u8 *dst)
 {
-	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
-	unsigned int partial = ctx->count % GHASH_BLOCK_SIZE;
+	struct ghash_key *key = crypto_shash_ctx(desc->tfm);
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
 
-	if (partial) {
-		struct ghash_key *key = crypto_shash_ctx(desc->tfm);
+	if (len) {
+		u8 buf[GHASH_BLOCK_SIZE] = {};
 
-		memset(ctx->buf + partial, 0, GHASH_BLOCK_SIZE - partial);
-		ghash_do_update(1, ctx->digest, ctx->buf, key, NULL);
+		memcpy(buf, src, len);
+		ghash_do_update(1, ctx->digest, buf, key, NULL);
+		memzero_explicit(buf, sizeof(buf));
 	}
-	put_unaligned_be64(ctx->digest[1], dst);
-	put_unaligned_be64(ctx->digest[0], dst + 8);
-
-	*ctx = (struct ghash_desc_ctx){};
-	return 0;
+	return ghash_export(desc, dst);
 }
 
 static void ghash_reflect(u64 h[], const be128 *k)
@@ -184,165 +167,393 @@ static struct shash_alg ghash_alg = {
 	.digestsize		= GHASH_DIGEST_SIZE,
 	.init			= ghash_init,
 	.update			= ghash_update,
-	.final			= ghash_final,
+	.finup			= ghash_finup,
 	.setkey			= ghash_setkey,
-	.descsize		= sizeof(struct ghash_desc_ctx),
+	.export			= ghash_export,
+	.import			= ghash_import,
+	.descsize		= sizeof(struct arm_ghash_desc_ctx),
+	.statesize		= sizeof(struct ghash_desc_ctx),
 
 	.base.cra_name		= "ghash",
-	.base.cra_driver_name	= "ghash-ce-sync",
-	.base.cra_priority	= 300 - 1,
+	.base.cra_driver_name	= "ghash-ce",
+	.base.cra_priority	= 300,
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY,
 	.base.cra_blocksize	= GHASH_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct ghash_key) + sizeof(u64[2]),
 	.base.cra_module	= THIS_MODULE,
 };
 
-static int ghash_async_init(struct ahash_request *req)
+void pmull_gcm_encrypt(int blocks, u64 dg[], const char *src,
+		       struct gcm_key const *k, char *dst,
+		       const char *iv, int rounds, u32 counter);
+
+void pmull_gcm_enc_final(int blocks, u64 dg[], char *tag,
+			 struct gcm_key const *k, char *head,
+			 const char *iv, int rounds, u32 counter);
+
+void pmull_gcm_decrypt(int bytes, u64 dg[], const char *src,
+		       struct gcm_key const *k, char *dst,
+		       const char *iv, int rounds, u32 counter);
+
+int pmull_gcm_dec_final(int bytes, u64 dg[], char *tag,
+			struct gcm_key const *k, char *head,
+			const char *iv, int rounds, u32 counter,
+			const char *otag, int authsize);
+
+static int gcm_aes_setkey(struct crypto_aead *tfm, const u8 *inkey,
+			  unsigned int keylen)
 {
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct ahash_request *cryptd_req = ahash_request_ctx(req);
-	struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm;
-	struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
-	struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm);
-
-	desc->tfm = child;
-	return crypto_shash_init(desc);
+	struct gcm_key *ctx = crypto_aead_ctx(tfm);
+	struct crypto_aes_ctx aes_ctx;
+	be128 h, k;
+	int ret;
+
+	ret = aes_expandkey(&aes_ctx, inkey, keylen);
+	if (ret)
+		return -EINVAL;
+
+	aes_encrypt(&aes_ctx, (u8 *)&k, (u8[AES_BLOCK_SIZE]){});
+
+	memcpy(ctx->rk, aes_ctx.key_enc, sizeof(ctx->rk));
+	ctx->rounds = 6 + keylen / 4;
+
+	memzero_explicit(&aes_ctx, sizeof(aes_ctx));
+
+	ghash_reflect(ctx->h[0], &k);
+
+	h = k;
+	gf128mul_lle(&h, &k);
+	ghash_reflect(ctx->h[1], &h);
+
+	gf128mul_lle(&h, &k);
+	ghash_reflect(ctx->h[2], &h);
+
+	gf128mul_lle(&h, &k);
+	ghash_reflect(ctx->h[3], &h);
+
+	return 0;
 }
 
-static int ghash_async_update(struct ahash_request *req)
+static int gcm_aes_setauthsize(struct crypto_aead *tfm, unsigned int authsize)
 {
-	struct ahash_request *cryptd_req = ahash_request_ctx(req);
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm;
-
-	if (!crypto_simd_usable() ||
-	    (in_atomic() && cryptd_ahash_queued(cryptd_tfm))) {
-		memcpy(cryptd_req, req, sizeof(*req));
-		ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base);
-		return crypto_ahash_update(cryptd_req);
-	} else {
-		struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
-		return shash_ahash_update(req, desc);
-	}
+	return crypto_gcm_check_authsize(authsize);
 }
 
-static int ghash_async_final(struct ahash_request *req)
+static void gcm_update_mac(u64 dg[], const u8 *src, int count, u8 buf[],
+			   int *buf_count, struct gcm_key *ctx)
 {
-	struct ahash_request *cryptd_req = ahash_request_ctx(req);
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm;
-
-	if (!crypto_simd_usable() ||
-	    (in_atomic() && cryptd_ahash_queued(cryptd_tfm))) {
-		memcpy(cryptd_req, req, sizeof(*req));
-		ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base);
-		return crypto_ahash_final(cryptd_req);
-	} else {
-		struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
-		return crypto_shash_final(desc, req->result);
+	if (*buf_count > 0) {
+		int buf_added = min(count, GHASH_BLOCK_SIZE - *buf_count);
+
+		memcpy(&buf[*buf_count], src, buf_added);
+
+		*buf_count += buf_added;
+		src += buf_added;
+		count -= buf_added;
+	}
+
+	if (count >= GHASH_BLOCK_SIZE || *buf_count == GHASH_BLOCK_SIZE) {
+		int blocks = count / GHASH_BLOCK_SIZE;
+
+		pmull_ghash_update_p64(blocks, dg, src, ctx->h,
+				       *buf_count ? buf : NULL);
+
+		src += blocks * GHASH_BLOCK_SIZE;
+		count %= GHASH_BLOCK_SIZE;
+		*buf_count = 0;
+	}
+
+	if (count > 0) {
+		memcpy(buf, src, count);
+		*buf_count = count;
 	}
 }
 
-static int ghash_async_digest(struct ahash_request *req)
+static void gcm_calculate_auth_mac(struct aead_request *req, u64 dg[], u32 len)
 {
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct ahash_request *cryptd_req = ahash_request_ctx(req);
-	struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm;
-
-	if (!crypto_simd_usable() ||
-	    (in_atomic() && cryptd_ahash_queued(cryptd_tfm))) {
-		memcpy(cryptd_req, req, sizeof(*req));
-		ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base);
-		return crypto_ahash_digest(cryptd_req);
-	} else {
-		struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
-		struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm);
-
-		desc->tfm = child;
-		return shash_ahash_digest(req, desc);
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct gcm_key *ctx = crypto_aead_ctx(aead);
+	u8 buf[GHASH_BLOCK_SIZE];
+	struct scatter_walk walk;
+	int buf_count = 0;
+
+	scatterwalk_start(&walk, req->src);
+
+	do {
+		unsigned int n;
+
+		n = scatterwalk_next(&walk, len);
+		gcm_update_mac(dg, walk.addr, n, buf, &buf_count, ctx);
+		scatterwalk_done_src(&walk,  n);
+
+		if (unlikely(len / SZ_4K > (len - n) / SZ_4K)) {
+			kernel_neon_end();
+			kernel_neon_begin();
+		}
+
+		len -= n;
+	} while (len);
+
+	if (buf_count) {
+		memset(&buf[buf_count], 0, GHASH_BLOCK_SIZE - buf_count);
+		pmull_ghash_update_p64(1, dg, buf, ctx->h, NULL);
 	}
 }
 
-static int ghash_async_import(struct ahash_request *req, const void *in)
+static int gcm_encrypt(struct aead_request *req, const u8 *iv, u32 assoclen)
 {
-	struct ahash_request *cryptd_req = ahash_request_ctx(req);
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct gcm_key *ctx = crypto_aead_ctx(aead);
+	struct skcipher_walk walk;
+	u8 buf[AES_BLOCK_SIZE];
+	u32 counter = 2;
+	u64 dg[2] = {};
+	be128 lengths;
+	const u8 *src;
+	u8 *tag, *dst;
+	int tail, err;
+
+	err = skcipher_walk_aead_encrypt(&walk, req, false);
+
+	kernel_neon_begin();
+
+	if (assoclen)
+		gcm_calculate_auth_mac(req, dg, assoclen);
+
+	src = walk.src.virt.addr;
+	dst = walk.dst.virt.addr;
+
+	while (walk.nbytes >= AES_BLOCK_SIZE) {
+		int nblocks = walk.nbytes / AES_BLOCK_SIZE;
+
+		pmull_gcm_encrypt(nblocks, dg, src, ctx, dst, iv,
+				  ctx->rounds, counter);
+		counter += nblocks;
+
+		if (walk.nbytes == walk.total) {
+			src += nblocks * AES_BLOCK_SIZE;
+			dst += nblocks * AES_BLOCK_SIZE;
+			break;
+		}
+
+		kernel_neon_end();
+
+		err = skcipher_walk_done(&walk,
+					 walk.nbytes % AES_BLOCK_SIZE);
+		if (err)
+			return err;
+
+		src = walk.src.virt.addr;
+		dst = walk.dst.virt.addr;
+
+		kernel_neon_begin();
+	}
+
+
+	lengths.a = cpu_to_be64(assoclen * 8);
+	lengths.b = cpu_to_be64(req->cryptlen * 8);
+
+	tag = (u8 *)&lengths;
+	tail = walk.nbytes % AES_BLOCK_SIZE;
+
+	/*
+	 * Bounce via a buffer unless we are encrypting in place and src/dst
+	 * are not pointing to the start of the walk buffer. In that case, we
+	 * can do a NEON load/xor/store sequence in place as long as we move
+	 * the plain/ciphertext and keystream to the start of the register. If
+	 * not, do a memcpy() to the end of the buffer so we can reuse the same
+	 * logic.
+	 */
+	if (unlikely(tail && (tail == walk.nbytes || src != dst)))
+		src = memcpy(buf + sizeof(buf) - tail, src, tail);
 
-	desc->tfm = cryptd_ahash_child(ctx->cryptd_tfm);
+	pmull_gcm_enc_final(tail, dg, tag, ctx, (u8 *)src, iv,
+			    ctx->rounds, counter);
+	kernel_neon_end();
 
-	return crypto_shash_import(desc, in);
+	if (unlikely(tail && src != dst))
+		memcpy(dst, src, tail);
+
+	if (walk.nbytes) {
+		err = skcipher_walk_done(&walk, 0);
+		if (err)
+			return err;
+	}
+
+	/* copy authtag to end of dst */
+	scatterwalk_map_and_copy(tag, req->dst, req->assoclen + req->cryptlen,
+				 crypto_aead_authsize(aead), 1);
+
+	return 0;
 }
 
-static int ghash_async_export(struct ahash_request *req, void *out)
+static int gcm_decrypt(struct aead_request *req, const u8 *iv, u32 assoclen)
 {
-	struct ahash_request *cryptd_req = ahash_request_ctx(req);
-	struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct gcm_key *ctx = crypto_aead_ctx(aead);
+	int authsize = crypto_aead_authsize(aead);
+	struct skcipher_walk walk;
+	u8 otag[AES_BLOCK_SIZE];
+	u8 buf[AES_BLOCK_SIZE];
+	u32 counter = 2;
+	u64 dg[2] = {};
+	be128 lengths;
+	const u8 *src;
+	u8 *tag, *dst;
+	int tail, err, ret;
+
+	scatterwalk_map_and_copy(otag, req->src,
+				 req->assoclen + req->cryptlen - authsize,
+				 authsize, 0);
+
+	err = skcipher_walk_aead_decrypt(&walk, req, false);
+
+	kernel_neon_begin();
+
+	if (assoclen)
+		gcm_calculate_auth_mac(req, dg, assoclen);
+
+	src = walk.src.virt.addr;
+	dst = walk.dst.virt.addr;
+
+	while (walk.nbytes >= AES_BLOCK_SIZE) {
+		int nblocks = walk.nbytes / AES_BLOCK_SIZE;
+
+		pmull_gcm_decrypt(nblocks, dg, src, ctx, dst, iv,
+				  ctx->rounds, counter);
+		counter += nblocks;
+
+		if (walk.nbytes == walk.total) {
+			src += nblocks * AES_BLOCK_SIZE;
+			dst += nblocks * AES_BLOCK_SIZE;
+			break;
+		}
+
+		kernel_neon_end();
+
+		err = skcipher_walk_done(&walk,
+					 walk.nbytes % AES_BLOCK_SIZE);
+		if (err)
+			return err;
+
+		src = walk.src.virt.addr;
+		dst = walk.dst.virt.addr;
+
+		kernel_neon_begin();
+	}
 
-	return crypto_shash_export(desc, out);
+	lengths.a = cpu_to_be64(assoclen * 8);
+	lengths.b = cpu_to_be64((req->cryptlen - authsize) * 8);
+
+	tag = (u8 *)&lengths;
+	tail = walk.nbytes % AES_BLOCK_SIZE;
+
+	if (unlikely(tail && (tail == walk.nbytes || src != dst)))
+		src = memcpy(buf + sizeof(buf) - tail, src, tail);
+
+	ret = pmull_gcm_dec_final(tail, dg, tag, ctx, (u8 *)src, iv,
+				  ctx->rounds, counter, otag, authsize);
+	kernel_neon_end();
+
+	if (unlikely(tail && src != dst))
+		memcpy(dst, src, tail);
+
+	if (walk.nbytes) {
+		err = skcipher_walk_done(&walk, 0);
+		if (err)
+			return err;
+	}
+
+	return ret ? -EBADMSG : 0;
 }
 
-static int ghash_async_setkey(struct crypto_ahash *tfm, const u8 *key,
-			      unsigned int keylen)
+static int gcm_aes_encrypt(struct aead_request *req)
 {
-	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct crypto_ahash *child = &ctx->cryptd_tfm->base;
+	return gcm_encrypt(req, req->iv, req->assoclen);
+}
 
-	crypto_ahash_clear_flags(child, CRYPTO_TFM_REQ_MASK);
-	crypto_ahash_set_flags(child, crypto_ahash_get_flags(tfm)
-			       & CRYPTO_TFM_REQ_MASK);
-	return crypto_ahash_setkey(child, key, keylen);
+static int gcm_aes_decrypt(struct aead_request *req)
+{
+	return gcm_decrypt(req, req->iv, req->assoclen);
 }
 
-static int ghash_async_init_tfm(struct crypto_tfm *tfm)
+static int rfc4106_setkey(struct crypto_aead *tfm, const u8 *inkey,
+			  unsigned int keylen)
 {
-	struct cryptd_ahash *cryptd_tfm;
-	struct ghash_async_ctx *ctx = crypto_tfm_ctx(tfm);
+	struct gcm_key *ctx = crypto_aead_ctx(tfm);
+	int err;
 
-	cryptd_tfm = cryptd_alloc_ahash("ghash-ce-sync", 0, 0);
-	if (IS_ERR(cryptd_tfm))
-		return PTR_ERR(cryptd_tfm);
-	ctx->cryptd_tfm = cryptd_tfm;
-	crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
-				 sizeof(struct ahash_request) +
-				 crypto_ahash_reqsize(&cryptd_tfm->base));
+	keylen -= RFC4106_NONCE_SIZE;
+	err = gcm_aes_setkey(tfm, inkey, keylen);
+	if (err)
+		return err;
 
+	memcpy(ctx->nonce, inkey + keylen, RFC4106_NONCE_SIZE);
 	return 0;
 }
 
-static void ghash_async_exit_tfm(struct crypto_tfm *tfm)
+static int rfc4106_setauthsize(struct crypto_aead *tfm, unsigned int authsize)
 {
-	struct ghash_async_ctx *ctx = crypto_tfm_ctx(tfm);
+	return crypto_rfc4106_check_authsize(authsize);
+}
 
-	cryptd_free_ahash(ctx->cryptd_tfm);
+static int rfc4106_encrypt(struct aead_request *req)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct gcm_key *ctx = crypto_aead_ctx(aead);
+	u8 iv[GCM_AES_IV_SIZE];
+
+	memcpy(iv, ctx->nonce, RFC4106_NONCE_SIZE);
+	memcpy(iv + RFC4106_NONCE_SIZE, req->iv, GCM_RFC4106_IV_SIZE);
+
+	return crypto_ipsec_check_assoclen(req->assoclen) ?:
+	       gcm_encrypt(req, iv, req->assoclen - GCM_RFC4106_IV_SIZE);
 }
 
-static struct ahash_alg ghash_async_alg = {
-	.init			= ghash_async_init,
-	.update			= ghash_async_update,
-	.final			= ghash_async_final,
-	.setkey			= ghash_async_setkey,
-	.digest			= ghash_async_digest,
-	.import			= ghash_async_import,
-	.export			= ghash_async_export,
-	.halg.digestsize	= GHASH_DIGEST_SIZE,
-	.halg.statesize		= sizeof(struct ghash_desc_ctx),
-	.halg.base		= {
-		.cra_name	= "ghash",
-		.cra_driver_name = "ghash-ce",
-		.cra_priority	= 300,
-		.cra_flags	= CRYPTO_ALG_ASYNC,
-		.cra_blocksize	= GHASH_BLOCK_SIZE,
-		.cra_ctxsize	= sizeof(struct ghash_async_ctx),
-		.cra_module	= THIS_MODULE,
-		.cra_init	= ghash_async_init_tfm,
-		.cra_exit	= ghash_async_exit_tfm,
-	},
-};
+static int rfc4106_decrypt(struct aead_request *req)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct gcm_key *ctx = crypto_aead_ctx(aead);
+	u8 iv[GCM_AES_IV_SIZE];
+
+	memcpy(iv, ctx->nonce, RFC4106_NONCE_SIZE);
+	memcpy(iv + RFC4106_NONCE_SIZE, req->iv, GCM_RFC4106_IV_SIZE);
+
+	return crypto_ipsec_check_assoclen(req->assoclen) ?:
+	       gcm_decrypt(req, iv, req->assoclen - GCM_RFC4106_IV_SIZE);
+}
+
+static struct aead_alg gcm_aes_algs[] = {{
+	.ivsize			= GCM_AES_IV_SIZE,
+	.chunksize		= AES_BLOCK_SIZE,
+	.maxauthsize		= AES_BLOCK_SIZE,
+	.setkey			= gcm_aes_setkey,
+	.setauthsize		= gcm_aes_setauthsize,
+	.encrypt		= gcm_aes_encrypt,
+	.decrypt		= gcm_aes_decrypt,
+
+	.base.cra_name		= "gcm(aes)",
+	.base.cra_driver_name	= "gcm-aes-ce",
+	.base.cra_priority	= 400,
+	.base.cra_blocksize	= 1,
+	.base.cra_ctxsize	= sizeof(struct gcm_key),
+	.base.cra_module	= THIS_MODULE,
+}, {
+	.ivsize			= GCM_RFC4106_IV_SIZE,
+	.chunksize		= AES_BLOCK_SIZE,
+	.maxauthsize		= AES_BLOCK_SIZE,
+	.setkey			= rfc4106_setkey,
+	.setauthsize		= rfc4106_setauthsize,
+	.encrypt		= rfc4106_encrypt,
+	.decrypt		= rfc4106_decrypt,
+
+	.base.cra_name		= "rfc4106(gcm(aes))",
+	.base.cra_driver_name	= "rfc4106-gcm-aes-ce",
+	.base.cra_priority	= 400,
+	.base.cra_blocksize	= 1,
+	.base.cra_ctxsize	= sizeof(struct gcm_key) + RFC4106_NONCE_SIZE,
+	.base.cra_module	= THIS_MODULE,
+}};
 
 static int __init ghash_ce_mod_init(void)
 {
@@ -352,28 +563,33 @@ static int __init ghash_ce_mod_init(void)
 		return -ENODEV;
 
 	if (elf_hwcap2 & HWCAP2_PMULL) {
+		err = crypto_register_aeads(gcm_aes_algs,
+					    ARRAY_SIZE(gcm_aes_algs));
+		if (err)
+			return err;
 		ghash_alg.base.cra_ctxsize += 3 * sizeof(u64[2]);
 		static_branch_enable(&use_p64);
 	}
 
 	err = crypto_register_shash(&ghash_alg);
 	if (err)
-		return err;
-	err = crypto_register_ahash(&ghash_async_alg);
-	if (err)
-		goto err_shash;
+		goto err_aead;
 
 	return 0;
 
-err_shash:
-	crypto_unregister_shash(&ghash_alg);
+err_aead:
+	if (elf_hwcap2 & HWCAP2_PMULL)
+		crypto_unregister_aeads(gcm_aes_algs,
+					ARRAY_SIZE(gcm_aes_algs));
 	return err;
 }
 
 static void __exit ghash_ce_mod_exit(void)
 {
-	crypto_unregister_ahash(&ghash_async_alg);
 	crypto_unregister_shash(&ghash_alg);
+	if (elf_hwcap2 & HWCAP2_PMULL)
+		crypto_unregister_aeads(gcm_aes_algs,
+					ARRAY_SIZE(gcm_aes_algs));
 }
 
 module_init(ghash_ce_mod_init);
diff --git a/arch/arm/crypto/nh-neon-core.S b/arch/arm/crypto/nh-neon-core.S
index 434d80ab531c..01620a0782ca 100644
--- a/arch/arm/crypto/nh-neon-core.S
+++ b/arch/arm/crypto/nh-neon-core.S
@@ -69,7 +69,7 @@
 
 /*
  * void nh_neon(const u32 *key, const u8 *message, size_t message_len,
- *		u8 hash[NH_HASH_BYTES])
+ *		__le64 hash[NH_NUM_PASSES])
  *
  * It's guaranteed that message_len % 16 == 0.
  */
diff --git a/arch/arm/crypto/nhpoly1305-neon-glue.c b/arch/arm/crypto/nhpoly1305-neon-glue.c
index ffa8d73fe722..62cf7ccdde73 100644
--- a/arch/arm/crypto/nhpoly1305-neon-glue.c
+++ b/arch/arm/crypto/nhpoly1305-neon-glue.c
@@ -14,14 +14,7 @@
 #include <linux/module.h>
 
 asmlinkage void nh_neon(const u32 *key, const u8 *message, size_t message_len,
-			u8 hash[NH_HASH_BYTES]);
-
-/* wrapper to avoid indirect call to assembly, which doesn't work with CFI */
-static void _nh_neon(const u32 *key, const u8 *message, size_t message_len,
-		     __le64 hash[NH_NUM_PASSES])
-{
-	nh_neon(key, message, message_len, (u8 *)hash);
-}
+			__le64 hash[NH_NUM_PASSES]);
 
 static int nhpoly1305_neon_update(struct shash_desc *desc,
 				  const u8 *src, unsigned int srclen)
@@ -33,7 +26,7 @@ static int nhpoly1305_neon_update(struct shash_desc *desc,
 		unsigned int n = min_t(unsigned int, srclen, SZ_4K);
 
 		kernel_neon_begin();
-		crypto_nhpoly1305_update_helper(desc, src, n, _nh_neon);
+		crypto_nhpoly1305_update_helper(desc, src, n, nh_neon);
 		kernel_neon_end();
 		src += n;
 		srclen -= n;
@@ -41,6 +34,14 @@ static int nhpoly1305_neon_update(struct shash_desc *desc,
 	return 0;
 }
 
+static int nhpoly1305_neon_digest(struct shash_desc *desc,
+				  const u8 *src, unsigned int srclen, u8 *out)
+{
+	return crypto_nhpoly1305_init(desc) ?:
+	       nhpoly1305_neon_update(desc, src, srclen) ?:
+	       crypto_nhpoly1305_final(desc, out);
+}
+
 static struct shash_alg nhpoly1305_alg = {
 	.base.cra_name		= "nhpoly1305",
 	.base.cra_driver_name	= "nhpoly1305-neon",
@@ -51,6 +52,7 @@ static struct shash_alg nhpoly1305_alg = {
 	.init			= crypto_nhpoly1305_init,
 	.update			= nhpoly1305_neon_update,
 	.final			= crypto_nhpoly1305_final,
+	.digest			= nhpoly1305_neon_digest,
 	.setkey			= crypto_nhpoly1305_setkey,
 	.descsize		= sizeof(struct nhpoly1305_state),
 };
diff --git a/arch/arm/crypto/poly1305-armv4.pl b/arch/arm/crypto/poly1305-armv4.pl
deleted file mode 100644
index 6d79498d3115..000000000000
--- a/arch/arm/crypto/poly1305-armv4.pl
+++ /dev/null
@@ -1,1236 +0,0 @@
-#!/usr/bin/env perl
-# SPDX-License-Identifier: GPL-1.0+ OR BSD-3-Clause
-#
-# ====================================================================
-# Written by Andy Polyakov, @dot-asm, initially for the OpenSSL
-# project.
-# ====================================================================
-#
-#			IALU(*)/gcc-4.4		NEON
-#
-# ARM11xx(ARMv6)	7.78/+100%		-
-# Cortex-A5		6.35/+130%		3.00
-# Cortex-A8		6.25/+115%		2.36
-# Cortex-A9		5.10/+95%		2.55
-# Cortex-A15		3.85/+85%		1.25(**)
-# Snapdragon S4		5.70/+100%		1.48(**)
-#
-# (*)	this is for -march=armv6, i.e. with bunch of ldrb loading data;
-# (**)	these are trade-off results, they can be improved by ~8% but at
-#	the cost of 15/12% regression on Cortex-A5/A7, it's even possible
-#	to improve Cortex-A9 result, but then A5/A7 loose more than 20%;
-
-$flavour = shift;
-if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
-else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
-
-if ($flavour && $flavour ne "void") {
-    $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-    ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
-    ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
-    die "can't locate arm-xlate.pl";
-
-    open STDOUT,"| \"$^X\" $xlate $flavour $output";
-} else {
-    open STDOUT,">$output";
-}
-
-($ctx,$inp,$len,$padbit)=map("r$_",(0..3));
-
-$code.=<<___;
-#ifndef	__KERNEL__
-# include "arm_arch.h"
-#else
-# define __ARM_ARCH__ __LINUX_ARM_ARCH__
-# define __ARM_MAX_ARCH__ __LINUX_ARM_ARCH__
-# define poly1305_init   poly1305_init_arm
-# define poly1305_blocks poly1305_blocks_arm
-# define poly1305_emit   poly1305_emit_arm
-.globl	poly1305_blocks_neon
-#endif
-
-#if defined(__thumb2__)
-.syntax	unified
-.thumb
-#else
-.code	32
-#endif
-
-.text
-
-.globl	poly1305_emit
-.globl	poly1305_blocks
-.globl	poly1305_init
-.type	poly1305_init,%function
-.align	5
-poly1305_init:
-.Lpoly1305_init:
-	stmdb	sp!,{r4-r11}
-
-	eor	r3,r3,r3
-	cmp	$inp,#0
-	str	r3,[$ctx,#0]		@ zero hash value
-	str	r3,[$ctx,#4]
-	str	r3,[$ctx,#8]
-	str	r3,[$ctx,#12]
-	str	r3,[$ctx,#16]
-	str	r3,[$ctx,#36]		@ clear is_base2_26
-	add	$ctx,$ctx,#20
-
-#ifdef	__thumb2__
-	it	eq
-#endif
-	moveq	r0,#0
-	beq	.Lno_key
-
-#if	__ARM_MAX_ARCH__>=7
-	mov	r3,#-1
-	str	r3,[$ctx,#28]		@ impossible key power value
-# ifndef __KERNEL__
-	adr	r11,.Lpoly1305_init
-	ldr	r12,.LOPENSSL_armcap
-# endif
-#endif
-	ldrb	r4,[$inp,#0]
-	mov	r10,#0x0fffffff
-	ldrb	r5,[$inp,#1]
-	and	r3,r10,#-4		@ 0x0ffffffc
-	ldrb	r6,[$inp,#2]
-	ldrb	r7,[$inp,#3]
-	orr	r4,r4,r5,lsl#8
-	ldrb	r5,[$inp,#4]
-	orr	r4,r4,r6,lsl#16
-	ldrb	r6,[$inp,#5]
-	orr	r4,r4,r7,lsl#24
-	ldrb	r7,[$inp,#6]
-	and	r4,r4,r10
-
-#if	__ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-# if !defined(_WIN32)
-	ldr	r12,[r11,r12]		@ OPENSSL_armcap_P
-# endif
-# if defined(__APPLE__) || defined(_WIN32)
-	ldr	r12,[r12]
-# endif
-#endif
-	ldrb	r8,[$inp,#7]
-	orr	r5,r5,r6,lsl#8
-	ldrb	r6,[$inp,#8]
-	orr	r5,r5,r7,lsl#16
-	ldrb	r7,[$inp,#9]
-	orr	r5,r5,r8,lsl#24
-	ldrb	r8,[$inp,#10]
-	and	r5,r5,r3
-
-#if	__ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-	tst	r12,#ARMV7_NEON		@ check for NEON
-# ifdef	__thumb2__
-	adr	r9,.Lpoly1305_blocks_neon
-	adr	r11,.Lpoly1305_blocks
-	it	ne
-	movne	r11,r9
-	adr	r12,.Lpoly1305_emit
-	orr	r11,r11,#1		@ thumb-ify addresses
-	orr	r12,r12,#1
-# else
-	add	r12,r11,#(.Lpoly1305_emit-.Lpoly1305_init)
-	ite	eq
-	addeq	r11,r11,#(.Lpoly1305_blocks-.Lpoly1305_init)
-	addne	r11,r11,#(.Lpoly1305_blocks_neon-.Lpoly1305_init)
-# endif
-#endif
-	ldrb	r9,[$inp,#11]
-	orr	r6,r6,r7,lsl#8
-	ldrb	r7,[$inp,#12]
-	orr	r6,r6,r8,lsl#16
-	ldrb	r8,[$inp,#13]
-	orr	r6,r6,r9,lsl#24
-	ldrb	r9,[$inp,#14]
-	and	r6,r6,r3
-
-	ldrb	r10,[$inp,#15]
-	orr	r7,r7,r8,lsl#8
-	str	r4,[$ctx,#0]
-	orr	r7,r7,r9,lsl#16
-	str	r5,[$ctx,#4]
-	orr	r7,r7,r10,lsl#24
-	str	r6,[$ctx,#8]
-	and	r7,r7,r3
-	str	r7,[$ctx,#12]
-#if	__ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-	stmia	r2,{r11,r12}		@ fill functions table
-	mov	r0,#1
-#else
-	mov	r0,#0
-#endif
-.Lno_key:
-	ldmia	sp!,{r4-r11}
-#if	__ARM_ARCH__>=5
-	ret				@ bx	lr
-#else
-	tst	lr,#1
-	moveq	pc,lr			@ be binary compatible with V4, yet
-	bx	lr			@ interoperable with Thumb ISA:-)
-#endif
-.size	poly1305_init,.-poly1305_init
-___
-{
-my ($h0,$h1,$h2,$h3,$h4,$r0,$r1,$r2,$r3)=map("r$_",(4..12));
-my ($s1,$s2,$s3)=($r1,$r2,$r3);
-
-$code.=<<___;
-.type	poly1305_blocks,%function
-.align	5
-poly1305_blocks:
-.Lpoly1305_blocks:
-	stmdb	sp!,{r3-r11,lr}
-
-	ands	$len,$len,#-16
-	beq	.Lno_data
-
-	add	$len,$len,$inp		@ end pointer
-	sub	sp,sp,#32
-
-#if __ARM_ARCH__<7
-	ldmia	$ctx,{$h0-$r3}		@ load context
-	add	$ctx,$ctx,#20
-	str	$len,[sp,#16]		@ offload stuff
-	str	$ctx,[sp,#12]
-#else
-	ldr	lr,[$ctx,#36]		@ is_base2_26
-	ldmia	$ctx!,{$h0-$h4}		@ load hash value
-	str	$len,[sp,#16]		@ offload stuff
-	str	$ctx,[sp,#12]
-
-	adds	$r0,$h0,$h1,lsl#26	@ base 2^26 -> base 2^32
-	mov	$r1,$h1,lsr#6
-	adcs	$r1,$r1,$h2,lsl#20
-	mov	$r2,$h2,lsr#12
-	adcs	$r2,$r2,$h3,lsl#14
-	mov	$r3,$h3,lsr#18
-	adcs	$r3,$r3,$h4,lsl#8
-	mov	$len,#0
-	teq	lr,#0
-	str	$len,[$ctx,#16]		@ clear is_base2_26
-	adc	$len,$len,$h4,lsr#24
-
-	itttt	ne
-	movne	$h0,$r0			@ choose between radixes
-	movne	$h1,$r1
-	movne	$h2,$r2
-	movne	$h3,$r3
-	ldmia	$ctx,{$r0-$r3}		@ load key
-	it	ne
-	movne	$h4,$len
-#endif
-
-	mov	lr,$inp
-	cmp	$padbit,#0
-	str	$r1,[sp,#20]
-	str	$r2,[sp,#24]
-	str	$r3,[sp,#28]
-	b	.Loop
-
-.align	4
-.Loop:
-#if __ARM_ARCH__<7
-	ldrb	r0,[lr],#16		@ load input
-# ifdef	__thumb2__
-	it	hi
-# endif
-	addhi	$h4,$h4,#1		@ 1<<128
-	ldrb	r1,[lr,#-15]
-	ldrb	r2,[lr,#-14]
-	ldrb	r3,[lr,#-13]
-	orr	r1,r0,r1,lsl#8
-	ldrb	r0,[lr,#-12]
-	orr	r2,r1,r2,lsl#16
-	ldrb	r1,[lr,#-11]
-	orr	r3,r2,r3,lsl#24
-	ldrb	r2,[lr,#-10]
-	adds	$h0,$h0,r3		@ accumulate input
-
-	ldrb	r3,[lr,#-9]
-	orr	r1,r0,r1,lsl#8
-	ldrb	r0,[lr,#-8]
-	orr	r2,r1,r2,lsl#16
-	ldrb	r1,[lr,#-7]
-	orr	r3,r2,r3,lsl#24
-	ldrb	r2,[lr,#-6]
-	adcs	$h1,$h1,r3
-
-	ldrb	r3,[lr,#-5]
-	orr	r1,r0,r1,lsl#8
-	ldrb	r0,[lr,#-4]
-	orr	r2,r1,r2,lsl#16
-	ldrb	r1,[lr,#-3]
-	orr	r3,r2,r3,lsl#24
-	ldrb	r2,[lr,#-2]
-	adcs	$h2,$h2,r3
-
-	ldrb	r3,[lr,#-1]
-	orr	r1,r0,r1,lsl#8
-	str	lr,[sp,#8]		@ offload input pointer
-	orr	r2,r1,r2,lsl#16
-	add	$s1,$r1,$r1,lsr#2
-	orr	r3,r2,r3,lsl#24
-#else
-	ldr	r0,[lr],#16		@ load input
-	it	hi
-	addhi	$h4,$h4,#1		@ padbit
-	ldr	r1,[lr,#-12]
-	ldr	r2,[lr,#-8]
-	ldr	r3,[lr,#-4]
-# ifdef	__ARMEB__
-	rev	r0,r0
-	rev	r1,r1
-	rev	r2,r2
-	rev	r3,r3
-# endif
-	adds	$h0,$h0,r0		@ accumulate input
-	str	lr,[sp,#8]		@ offload input pointer
-	adcs	$h1,$h1,r1
-	add	$s1,$r1,$r1,lsr#2
-	adcs	$h2,$h2,r2
-#endif
-	add	$s2,$r2,$r2,lsr#2
-	adcs	$h3,$h3,r3
-	add	$s3,$r3,$r3,lsr#2
-
-	umull	r2,r3,$h1,$r0
-	 adc	$h4,$h4,#0
-	umull	r0,r1,$h0,$r0
-	umlal	r2,r3,$h4,$s1
-	umlal	r0,r1,$h3,$s1
-	ldr	$r1,[sp,#20]		@ reload $r1
-	umlal	r2,r3,$h2,$s3
-	umlal	r0,r1,$h1,$s3
-	umlal	r2,r3,$h3,$s2
-	umlal	r0,r1,$h2,$s2
-	umlal	r2,r3,$h0,$r1
-	str	r0,[sp,#0]		@ future $h0
-	 mul	r0,$s2,$h4
-	ldr	$r2,[sp,#24]		@ reload $r2
-	adds	r2,r2,r1		@ d1+=d0>>32
-	 eor	r1,r1,r1
-	adc	lr,r3,#0		@ future $h2
-	str	r2,[sp,#4]		@ future $h1
-
-	mul	r2,$s3,$h4
-	eor	r3,r3,r3
-	umlal	r0,r1,$h3,$s3
-	ldr	$r3,[sp,#28]		@ reload $r3
-	umlal	r2,r3,$h3,$r0
-	umlal	r0,r1,$h2,$r0
-	umlal	r2,r3,$h2,$r1
-	umlal	r0,r1,$h1,$r1
-	umlal	r2,r3,$h1,$r2
-	umlal	r0,r1,$h0,$r2
-	umlal	r2,r3,$h0,$r3
-	ldr	$h0,[sp,#0]
-	mul	$h4,$r0,$h4
-	ldr	$h1,[sp,#4]
-
-	adds	$h2,lr,r0		@ d2+=d1>>32
-	ldr	lr,[sp,#8]		@ reload input pointer
-	adc	r1,r1,#0
-	adds	$h3,r2,r1		@ d3+=d2>>32
-	ldr	r0,[sp,#16]		@ reload end pointer
-	adc	r3,r3,#0
-	add	$h4,$h4,r3		@ h4+=d3>>32
-
-	and	r1,$h4,#-4
-	and	$h4,$h4,#3
-	add	r1,r1,r1,lsr#2		@ *=5
-	adds	$h0,$h0,r1
-	adcs	$h1,$h1,#0
-	adcs	$h2,$h2,#0
-	adcs	$h3,$h3,#0
-	adc	$h4,$h4,#0
-
-	cmp	r0,lr			@ done yet?
-	bhi	.Loop
-
-	ldr	$ctx,[sp,#12]
-	add	sp,sp,#32
-	stmdb	$ctx,{$h0-$h4}		@ store the result
-
-.Lno_data:
-#if	__ARM_ARCH__>=5
-	ldmia	sp!,{r3-r11,pc}
-#else
-	ldmia	sp!,{r3-r11,lr}
-	tst	lr,#1
-	moveq	pc,lr			@ be binary compatible with V4, yet
-	bx	lr			@ interoperable with Thumb ISA:-)
-#endif
-.size	poly1305_blocks,.-poly1305_blocks
-___
-}
-{
-my ($ctx,$mac,$nonce)=map("r$_",(0..2));
-my ($h0,$h1,$h2,$h3,$h4,$g0,$g1,$g2,$g3)=map("r$_",(3..11));
-my $g4=$ctx;
-
-$code.=<<___;
-.type	poly1305_emit,%function
-.align	5
-poly1305_emit:
-.Lpoly1305_emit:
-	stmdb	sp!,{r4-r11}
-
-	ldmia	$ctx,{$h0-$h4}
-
-#if __ARM_ARCH__>=7
-	ldr	ip,[$ctx,#36]		@ is_base2_26
-
-	adds	$g0,$h0,$h1,lsl#26	@ base 2^26 -> base 2^32
-	mov	$g1,$h1,lsr#6
-	adcs	$g1,$g1,$h2,lsl#20
-	mov	$g2,$h2,lsr#12
-	adcs	$g2,$g2,$h3,lsl#14
-	mov	$g3,$h3,lsr#18
-	adcs	$g3,$g3,$h4,lsl#8
-	mov	$g4,#0
-	adc	$g4,$g4,$h4,lsr#24
-
-	tst	ip,ip
-	itttt	ne
-	movne	$h0,$g0
-	movne	$h1,$g1
-	movne	$h2,$g2
-	movne	$h3,$g3
-	it	ne
-	movne	$h4,$g4
-#endif
-
-	adds	$g0,$h0,#5		@ compare to modulus
-	adcs	$g1,$h1,#0
-	adcs	$g2,$h2,#0
-	adcs	$g3,$h3,#0
-	adc	$g4,$h4,#0
-	tst	$g4,#4			@ did it carry/borrow?
-
-#ifdef	__thumb2__
-	it	ne
-#endif
-	movne	$h0,$g0
-	ldr	$g0,[$nonce,#0]
-#ifdef	__thumb2__
-	it	ne
-#endif
-	movne	$h1,$g1
-	ldr	$g1,[$nonce,#4]
-#ifdef	__thumb2__
-	it	ne
-#endif
-	movne	$h2,$g2
-	ldr	$g2,[$nonce,#8]
-#ifdef	__thumb2__
-	it	ne
-#endif
-	movne	$h3,$g3
-	ldr	$g3,[$nonce,#12]
-
-	adds	$h0,$h0,$g0
-	adcs	$h1,$h1,$g1
-	adcs	$h2,$h2,$g2
-	adc	$h3,$h3,$g3
-
-#if __ARM_ARCH__>=7
-# ifdef __ARMEB__
-	rev	$h0,$h0
-	rev	$h1,$h1
-	rev	$h2,$h2
-	rev	$h3,$h3
-# endif
-	str	$h0,[$mac,#0]
-	str	$h1,[$mac,#4]
-	str	$h2,[$mac,#8]
-	str	$h3,[$mac,#12]
-#else
-	strb	$h0,[$mac,#0]
-	mov	$h0,$h0,lsr#8
-	strb	$h1,[$mac,#4]
-	mov	$h1,$h1,lsr#8
-	strb	$h2,[$mac,#8]
-	mov	$h2,$h2,lsr#8
-	strb	$h3,[$mac,#12]
-	mov	$h3,$h3,lsr#8
-
-	strb	$h0,[$mac,#1]
-	mov	$h0,$h0,lsr#8
-	strb	$h1,[$mac,#5]
-	mov	$h1,$h1,lsr#8
-	strb	$h2,[$mac,#9]
-	mov	$h2,$h2,lsr#8
-	strb	$h3,[$mac,#13]
-	mov	$h3,$h3,lsr#8
-
-	strb	$h0,[$mac,#2]
-	mov	$h0,$h0,lsr#8
-	strb	$h1,[$mac,#6]
-	mov	$h1,$h1,lsr#8
-	strb	$h2,[$mac,#10]
-	mov	$h2,$h2,lsr#8
-	strb	$h3,[$mac,#14]
-	mov	$h3,$h3,lsr#8
-
-	strb	$h0,[$mac,#3]
-	strb	$h1,[$mac,#7]
-	strb	$h2,[$mac,#11]
-	strb	$h3,[$mac,#15]
-#endif
-	ldmia	sp!,{r4-r11}
-#if	__ARM_ARCH__>=5
-	ret				@ bx	lr
-#else
-	tst	lr,#1
-	moveq	pc,lr			@ be binary compatible with V4, yet
-	bx	lr			@ interoperable with Thumb ISA:-)
-#endif
-.size	poly1305_emit,.-poly1305_emit
-___
-{
-my ($R0,$R1,$S1,$R2,$S2,$R3,$S3,$R4,$S4) = map("d$_",(0..9));
-my ($D0,$D1,$D2,$D3,$D4, $H0,$H1,$H2,$H3,$H4) = map("q$_",(5..14));
-my ($T0,$T1,$MASK) = map("q$_",(15,4,0));
-
-my ($in2,$zeros,$tbl0,$tbl1) = map("r$_",(4..7));
-
-$code.=<<___;
-#if	__ARM_MAX_ARCH__>=7
-.fpu	neon
-
-.type	poly1305_init_neon,%function
-.align	5
-poly1305_init_neon:
-.Lpoly1305_init_neon:
-	ldr	r3,[$ctx,#48]		@ first table element
-	cmp	r3,#-1			@ is value impossible?
-	bne	.Lno_init_neon
-
-	ldr	r4,[$ctx,#20]		@ load key base 2^32
-	ldr	r5,[$ctx,#24]
-	ldr	r6,[$ctx,#28]
-	ldr	r7,[$ctx,#32]
-
-	and	r2,r4,#0x03ffffff	@ base 2^32 -> base 2^26
-	mov	r3,r4,lsr#26
-	mov	r4,r5,lsr#20
-	orr	r3,r3,r5,lsl#6
-	mov	r5,r6,lsr#14
-	orr	r4,r4,r6,lsl#12
-	mov	r6,r7,lsr#8
-	orr	r5,r5,r7,lsl#18
-	and	r3,r3,#0x03ffffff
-	and	r4,r4,#0x03ffffff
-	and	r5,r5,#0x03ffffff
-
-	vdup.32	$R0,r2			@ r^1 in both lanes
-	add	r2,r3,r3,lsl#2		@ *5
-	vdup.32	$R1,r3
-	add	r3,r4,r4,lsl#2
-	vdup.32	$S1,r2
-	vdup.32	$R2,r4
-	add	r4,r5,r5,lsl#2
-	vdup.32	$S2,r3
-	vdup.32	$R3,r5
-	add	r5,r6,r6,lsl#2
-	vdup.32	$S3,r4
-	vdup.32	$R4,r6
-	vdup.32	$S4,r5
-
-	mov	$zeros,#2		@ counter
-
-.Lsquare_neon:
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
-	@ d1 = h1*r0 + h0*r1   + h4*5*r2 + h3*5*r3 + h2*5*r4
-	@ d2 = h2*r0 + h1*r1   + h0*r2   + h4*5*r3 + h3*5*r4
-	@ d3 = h3*r0 + h2*r1   + h1*r2   + h0*r3   + h4*5*r4
-	@ d4 = h4*r0 + h3*r1   + h2*r2   + h1*r3   + h0*r4
-
-	vmull.u32	$D0,$R0,${R0}[1]
-	vmull.u32	$D1,$R1,${R0}[1]
-	vmull.u32	$D2,$R2,${R0}[1]
-	vmull.u32	$D3,$R3,${R0}[1]
-	vmull.u32	$D4,$R4,${R0}[1]
-
-	vmlal.u32	$D0,$R4,${S1}[1]
-	vmlal.u32	$D1,$R0,${R1}[1]
-	vmlal.u32	$D2,$R1,${R1}[1]
-	vmlal.u32	$D3,$R2,${R1}[1]
-	vmlal.u32	$D4,$R3,${R1}[1]
-
-	vmlal.u32	$D0,$R3,${S2}[1]
-	vmlal.u32	$D1,$R4,${S2}[1]
-	vmlal.u32	$D3,$R1,${R2}[1]
-	vmlal.u32	$D2,$R0,${R2}[1]
-	vmlal.u32	$D4,$R2,${R2}[1]
-
-	vmlal.u32	$D0,$R2,${S3}[1]
-	vmlal.u32	$D3,$R0,${R3}[1]
-	vmlal.u32	$D1,$R3,${S3}[1]
-	vmlal.u32	$D2,$R4,${S3}[1]
-	vmlal.u32	$D4,$R1,${R3}[1]
-
-	vmlal.u32	$D3,$R4,${S4}[1]
-	vmlal.u32	$D0,$R1,${S4}[1]
-	vmlal.u32	$D1,$R2,${S4}[1]
-	vmlal.u32	$D2,$R3,${S4}[1]
-	vmlal.u32	$D4,$R0,${R4}[1]
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ lazy reduction as discussed in "NEON crypto" by D.J. Bernstein
-	@ and P. Schwabe
-	@
-	@ H0>>+H1>>+H2>>+H3>>+H4
-	@ H3>>+H4>>*5+H0>>+H1
-	@
-	@ Trivia.
-	@
-	@ Result of multiplication of n-bit number by m-bit number is
-	@ n+m bits wide. However! Even though 2^n is a n+1-bit number,
-	@ m-bit number multiplied by 2^n is still n+m bits wide.
-	@
-	@ Sum of two n-bit numbers is n+1 bits wide, sum of three - n+2,
-	@ and so is sum of four. Sum of 2^m n-m-bit numbers and n-bit
-	@ one is n+1 bits wide.
-	@
-	@ >>+ denotes Hnext += Hn>>26, Hn &= 0x3ffffff. This means that
-	@ H0, H2, H3 are guaranteed to be 26 bits wide, while H1 and H4
-	@ can be 27. However! In cases when their width exceeds 26 bits
-	@ they are limited by 2^26+2^6. This in turn means that *sum*
-	@ of the products with these values can still be viewed as sum
-	@ of 52-bit numbers as long as the amount of addends is not a
-	@ power of 2. For example,
-	@
-	@ H4 = H4*R0 + H3*R1 + H2*R2 + H1*R3 + H0 * R4,
-	@
-	@ which can't be larger than 5 * (2^26 + 2^6) * (2^26 + 2^6), or
-	@ 5 * (2^52 + 2*2^32 + 2^12), which in turn is smaller than
-	@ 8 * (2^52) or 2^55. However, the value is then multiplied by
-	@ by 5, so we should be looking at 5 * 5 * (2^52 + 2^33 + 2^12),
-	@ which is less than 32 * (2^52) or 2^57. And when processing
-	@ data we are looking at triple as many addends...
-	@
-	@ In key setup procedure pre-reduced H0 is limited by 5*4+1 and
-	@ 5*H4 - by 5*5 52-bit addends, or 57 bits. But when hashing the
-	@ input H0 is limited by (5*4+1)*3 addends, or 58 bits, while
-	@ 5*H4 by 5*5*3, or 59[!] bits. How is this relevant? vmlal.u32
-	@ instruction accepts 2x32-bit input and writes 2x64-bit result.
-	@ This means that result of reduction have to be compressed upon
-	@ loop wrap-around. This can be done in the process of reduction
-	@ to minimize amount of instructions [as well as amount of
-	@ 128-bit instructions, which benefits low-end processors], but
-	@ one has to watch for H2 (which is narrower than H0) and 5*H4
-	@ not being wider than 58 bits, so that result of right shift
-	@ by 26 bits fits in 32 bits. This is also useful on x86,
-	@ because it allows to use paddd in place for paddq, which
-	@ benefits Atom, where paddq is ridiculously slow.
-
-	vshr.u64	$T0,$D3,#26
-	vmovn.i64	$D3#lo,$D3
-	 vshr.u64	$T1,$D0,#26
-	 vmovn.i64	$D0#lo,$D0
-	vadd.i64	$D4,$D4,$T0		@ h3 -> h4
-	vbic.i32	$D3#lo,#0xfc000000	@ &=0x03ffffff
-	 vadd.i64	$D1,$D1,$T1		@ h0 -> h1
-	 vbic.i32	$D0#lo,#0xfc000000
-
-	vshrn.u64	$T0#lo,$D4,#26
-	vmovn.i64	$D4#lo,$D4
-	 vshr.u64	$T1,$D1,#26
-	 vmovn.i64	$D1#lo,$D1
-	 vadd.i64	$D2,$D2,$T1		@ h1 -> h2
-	vbic.i32	$D4#lo,#0xfc000000
-	 vbic.i32	$D1#lo,#0xfc000000
-
-	vadd.i32	$D0#lo,$D0#lo,$T0#lo
-	vshl.u32	$T0#lo,$T0#lo,#2
-	 vshrn.u64	$T1#lo,$D2,#26
-	 vmovn.i64	$D2#lo,$D2
-	vadd.i32	$D0#lo,$D0#lo,$T0#lo	@ h4 -> h0
-	 vadd.i32	$D3#lo,$D3#lo,$T1#lo	@ h2 -> h3
-	 vbic.i32	$D2#lo,#0xfc000000
-
-	vshr.u32	$T0#lo,$D0#lo,#26
-	vbic.i32	$D0#lo,#0xfc000000
-	 vshr.u32	$T1#lo,$D3#lo,#26
-	 vbic.i32	$D3#lo,#0xfc000000
-	vadd.i32	$D1#lo,$D1#lo,$T0#lo	@ h0 -> h1
-	 vadd.i32	$D4#lo,$D4#lo,$T1#lo	@ h3 -> h4
-
-	subs		$zeros,$zeros,#1
-	beq		.Lsquare_break_neon
-
-	add		$tbl0,$ctx,#(48+0*9*4)
-	add		$tbl1,$ctx,#(48+1*9*4)
-
-	vtrn.32		$R0,$D0#lo		@ r^2:r^1
-	vtrn.32		$R2,$D2#lo
-	vtrn.32		$R3,$D3#lo
-	vtrn.32		$R1,$D1#lo
-	vtrn.32		$R4,$D4#lo
-
-	vshl.u32	$S2,$R2,#2		@ *5
-	vshl.u32	$S3,$R3,#2
-	vshl.u32	$S1,$R1,#2
-	vshl.u32	$S4,$R4,#2
-	vadd.i32	$S2,$S2,$R2
-	vadd.i32	$S1,$S1,$R1
-	vadd.i32	$S3,$S3,$R3
-	vadd.i32	$S4,$S4,$R4
-
-	vst4.32		{${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]!
-	vst4.32		{${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]!
-	vst4.32		{${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
-	vst4.32		{${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
-	vst1.32		{${S4}[0]},[$tbl0,:32]
-	vst1.32		{${S4}[1]},[$tbl1,:32]
-
-	b		.Lsquare_neon
-
-.align	4
-.Lsquare_break_neon:
-	add		$tbl0,$ctx,#(48+2*4*9)
-	add		$tbl1,$ctx,#(48+3*4*9)
-
-	vmov		$R0,$D0#lo		@ r^4:r^3
-	vshl.u32	$S1,$D1#lo,#2		@ *5
-	vmov		$R1,$D1#lo
-	vshl.u32	$S2,$D2#lo,#2
-	vmov		$R2,$D2#lo
-	vshl.u32	$S3,$D3#lo,#2
-	vmov		$R3,$D3#lo
-	vshl.u32	$S4,$D4#lo,#2
-	vmov		$R4,$D4#lo
-	vadd.i32	$S1,$S1,$D1#lo
-	vadd.i32	$S2,$S2,$D2#lo
-	vadd.i32	$S3,$S3,$D3#lo
-	vadd.i32	$S4,$S4,$D4#lo
-
-	vst4.32		{${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]!
-	vst4.32		{${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]!
-	vst4.32		{${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
-	vst4.32		{${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
-	vst1.32		{${S4}[0]},[$tbl0]
-	vst1.32		{${S4}[1]},[$tbl1]
-
-.Lno_init_neon:
-	ret				@ bx	lr
-.size	poly1305_init_neon,.-poly1305_init_neon
-
-.type	poly1305_blocks_neon,%function
-.align	5
-poly1305_blocks_neon:
-.Lpoly1305_blocks_neon:
-	ldr	ip,[$ctx,#36]		@ is_base2_26
-
-	cmp	$len,#64
-	blo	.Lpoly1305_blocks
-
-	stmdb	sp!,{r4-r7}
-	vstmdb	sp!,{d8-d15}		@ ABI specification says so
-
-	tst	ip,ip			@ is_base2_26?
-	bne	.Lbase2_26_neon
-
-	stmdb	sp!,{r1-r3,lr}
-	bl	.Lpoly1305_init_neon
-
-	ldr	r4,[$ctx,#0]		@ load hash value base 2^32
-	ldr	r5,[$ctx,#4]
-	ldr	r6,[$ctx,#8]
-	ldr	r7,[$ctx,#12]
-	ldr	ip,[$ctx,#16]
-
-	and	r2,r4,#0x03ffffff	@ base 2^32 -> base 2^26
-	mov	r3,r4,lsr#26
-	 veor	$D0#lo,$D0#lo,$D0#lo
-	mov	r4,r5,lsr#20
-	orr	r3,r3,r5,lsl#6
-	 veor	$D1#lo,$D1#lo,$D1#lo
-	mov	r5,r6,lsr#14
-	orr	r4,r4,r6,lsl#12
-	 veor	$D2#lo,$D2#lo,$D2#lo
-	mov	r6,r7,lsr#8
-	orr	r5,r5,r7,lsl#18
-	 veor	$D3#lo,$D3#lo,$D3#lo
-	and	r3,r3,#0x03ffffff
-	orr	r6,r6,ip,lsl#24
-	 veor	$D4#lo,$D4#lo,$D4#lo
-	and	r4,r4,#0x03ffffff
-	mov	r1,#1
-	and	r5,r5,#0x03ffffff
-	str	r1,[$ctx,#36]		@ set is_base2_26
-
-	vmov.32	$D0#lo[0],r2
-	vmov.32	$D1#lo[0],r3
-	vmov.32	$D2#lo[0],r4
-	vmov.32	$D3#lo[0],r5
-	vmov.32	$D4#lo[0],r6
-	adr	$zeros,.Lzeros
-
-	ldmia	sp!,{r1-r3,lr}
-	b	.Lhash_loaded
-
-.align	4
-.Lbase2_26_neon:
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ load hash value
-
-	veor		$D0#lo,$D0#lo,$D0#lo
-	veor		$D1#lo,$D1#lo,$D1#lo
-	veor		$D2#lo,$D2#lo,$D2#lo
-	veor		$D3#lo,$D3#lo,$D3#lo
-	veor		$D4#lo,$D4#lo,$D4#lo
-	vld4.32		{$D0#lo[0],$D1#lo[0],$D2#lo[0],$D3#lo[0]},[$ctx]!
-	adr		$zeros,.Lzeros
-	vld1.32		{$D4#lo[0]},[$ctx]
-	sub		$ctx,$ctx,#16		@ rewind
-
-.Lhash_loaded:
-	add		$in2,$inp,#32
-	mov		$padbit,$padbit,lsl#24
-	tst		$len,#31
-	beq		.Leven
-
-	vld4.32		{$H0#lo[0],$H1#lo[0],$H2#lo[0],$H3#lo[0]},[$inp]!
-	vmov.32		$H4#lo[0],$padbit
-	sub		$len,$len,#16
-	add		$in2,$inp,#32
-
-# ifdef	__ARMEB__
-	vrev32.8	$H0,$H0
-	vrev32.8	$H3,$H3
-	vrev32.8	$H1,$H1
-	vrev32.8	$H2,$H2
-# endif
-	vsri.u32	$H4#lo,$H3#lo,#8	@ base 2^32 -> base 2^26
-	vshl.u32	$H3#lo,$H3#lo,#18
-
-	vsri.u32	$H3#lo,$H2#lo,#14
-	vshl.u32	$H2#lo,$H2#lo,#12
-	vadd.i32	$H4#hi,$H4#lo,$D4#lo	@ add hash value and move to #hi
-
-	vbic.i32	$H3#lo,#0xfc000000
-	vsri.u32	$H2#lo,$H1#lo,#20
-	vshl.u32	$H1#lo,$H1#lo,#6
-
-	vbic.i32	$H2#lo,#0xfc000000
-	vsri.u32	$H1#lo,$H0#lo,#26
-	vadd.i32	$H3#hi,$H3#lo,$D3#lo
-
-	vbic.i32	$H0#lo,#0xfc000000
-	vbic.i32	$H1#lo,#0xfc000000
-	vadd.i32	$H2#hi,$H2#lo,$D2#lo
-
-	vadd.i32	$H0#hi,$H0#lo,$D0#lo
-	vadd.i32	$H1#hi,$H1#lo,$D1#lo
-
-	mov		$tbl1,$zeros
-	add		$tbl0,$ctx,#48
-
-	cmp		$len,$len
-	b		.Long_tail
-
-.align	4
-.Leven:
-	subs		$len,$len,#64
-	it		lo
-	movlo		$in2,$zeros
-
-	vmov.i32	$H4,#1<<24		@ padbit, yes, always
-	vld4.32		{$H0#lo,$H1#lo,$H2#lo,$H3#lo},[$inp]	@ inp[0:1]
-	add		$inp,$inp,#64
-	vld4.32		{$H0#hi,$H1#hi,$H2#hi,$H3#hi},[$in2]	@ inp[2:3] (or 0)
-	add		$in2,$in2,#64
-	itt		hi
-	addhi		$tbl1,$ctx,#(48+1*9*4)
-	addhi		$tbl0,$ctx,#(48+3*9*4)
-
-# ifdef	__ARMEB__
-	vrev32.8	$H0,$H0
-	vrev32.8	$H3,$H3
-	vrev32.8	$H1,$H1
-	vrev32.8	$H2,$H2
-# endif
-	vsri.u32	$H4,$H3,#8		@ base 2^32 -> base 2^26
-	vshl.u32	$H3,$H3,#18
-
-	vsri.u32	$H3,$H2,#14
-	vshl.u32	$H2,$H2,#12
-
-	vbic.i32	$H3,#0xfc000000
-	vsri.u32	$H2,$H1,#20
-	vshl.u32	$H1,$H1,#6
-
-	vbic.i32	$H2,#0xfc000000
-	vsri.u32	$H1,$H0,#26
-
-	vbic.i32	$H0,#0xfc000000
-	vbic.i32	$H1,#0xfc000000
-
-	bls		.Lskip_loop
-
-	vld4.32		{${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]!	@ load r^2
-	vld4.32		{${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]!	@ load r^4
-	vld4.32		{${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
-	vld4.32		{${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
-	b		.Loop_neon
-
-.align	5
-.Loop_neon:
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2
-	@ ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r
-	@   \___________________/
-	@ ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2
-	@ ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r
-	@   \___________________/ \____________________/
-	@
-	@ Note that we start with inp[2:3]*r^2. This is because it
-	@ doesn't depend on reduction in previous iteration.
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ d4 = h4*r0 + h3*r1   + h2*r2   + h1*r3   + h0*r4
-	@ d3 = h3*r0 + h2*r1   + h1*r2   + h0*r3   + h4*5*r4
-	@ d2 = h2*r0 + h1*r1   + h0*r2   + h4*5*r3 + h3*5*r4
-	@ d1 = h1*r0 + h0*r1   + h4*5*r2 + h3*5*r3 + h2*5*r4
-	@ d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ inp[2:3]*r^2
-
-	vadd.i32	$H2#lo,$H2#lo,$D2#lo	@ accumulate inp[0:1]
-	vmull.u32	$D2,$H2#hi,${R0}[1]
-	vadd.i32	$H0#lo,$H0#lo,$D0#lo
-	vmull.u32	$D0,$H0#hi,${R0}[1]
-	vadd.i32	$H3#lo,$H3#lo,$D3#lo
-	vmull.u32	$D3,$H3#hi,${R0}[1]
-	vmlal.u32	$D2,$H1#hi,${R1}[1]
-	vadd.i32	$H1#lo,$H1#lo,$D1#lo
-	vmull.u32	$D1,$H1#hi,${R0}[1]
-
-	vadd.i32	$H4#lo,$H4#lo,$D4#lo
-	vmull.u32	$D4,$H4#hi,${R0}[1]
-	subs		$len,$len,#64
-	vmlal.u32	$D0,$H4#hi,${S1}[1]
-	it		lo
-	movlo		$in2,$zeros
-	vmlal.u32	$D3,$H2#hi,${R1}[1]
-	vld1.32		${S4}[1],[$tbl1,:32]
-	vmlal.u32	$D1,$H0#hi,${R1}[1]
-	vmlal.u32	$D4,$H3#hi,${R1}[1]
-
-	vmlal.u32	$D0,$H3#hi,${S2}[1]
-	vmlal.u32	$D3,$H1#hi,${R2}[1]
-	vmlal.u32	$D4,$H2#hi,${R2}[1]
-	vmlal.u32	$D1,$H4#hi,${S2}[1]
-	vmlal.u32	$D2,$H0#hi,${R2}[1]
-
-	vmlal.u32	$D3,$H0#hi,${R3}[1]
-	vmlal.u32	$D0,$H2#hi,${S3}[1]
-	vmlal.u32	$D4,$H1#hi,${R3}[1]
-	vmlal.u32	$D1,$H3#hi,${S3}[1]
-	vmlal.u32	$D2,$H4#hi,${S3}[1]
-
-	vmlal.u32	$D3,$H4#hi,${S4}[1]
-	vmlal.u32	$D0,$H1#hi,${S4}[1]
-	vmlal.u32	$D4,$H0#hi,${R4}[1]
-	vmlal.u32	$D1,$H2#hi,${S4}[1]
-	vmlal.u32	$D2,$H3#hi,${S4}[1]
-
-	vld4.32		{$H0#hi,$H1#hi,$H2#hi,$H3#hi},[$in2]	@ inp[2:3] (or 0)
-	add		$in2,$in2,#64
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ (hash+inp[0:1])*r^4 and accumulate
-
-	vmlal.u32	$D3,$H3#lo,${R0}[0]
-	vmlal.u32	$D0,$H0#lo,${R0}[0]
-	vmlal.u32	$D4,$H4#lo,${R0}[0]
-	vmlal.u32	$D1,$H1#lo,${R0}[0]
-	vmlal.u32	$D2,$H2#lo,${R0}[0]
-	vld1.32		${S4}[0],[$tbl0,:32]
-
-	vmlal.u32	$D3,$H2#lo,${R1}[0]
-	vmlal.u32	$D0,$H4#lo,${S1}[0]
-	vmlal.u32	$D4,$H3#lo,${R1}[0]
-	vmlal.u32	$D1,$H0#lo,${R1}[0]
-	vmlal.u32	$D2,$H1#lo,${R1}[0]
-
-	vmlal.u32	$D3,$H1#lo,${R2}[0]
-	vmlal.u32	$D0,$H3#lo,${S2}[0]
-	vmlal.u32	$D4,$H2#lo,${R2}[0]
-	vmlal.u32	$D1,$H4#lo,${S2}[0]
-	vmlal.u32	$D2,$H0#lo,${R2}[0]
-
-	vmlal.u32	$D3,$H0#lo,${R3}[0]
-	vmlal.u32	$D0,$H2#lo,${S3}[0]
-	vmlal.u32	$D4,$H1#lo,${R3}[0]
-	vmlal.u32	$D1,$H3#lo,${S3}[0]
-	vmlal.u32	$D3,$H4#lo,${S4}[0]
-
-	vmlal.u32	$D2,$H4#lo,${S3}[0]
-	vmlal.u32	$D0,$H1#lo,${S4}[0]
-	vmlal.u32	$D4,$H0#lo,${R4}[0]
-	vmov.i32	$H4,#1<<24		@ padbit, yes, always
-	vmlal.u32	$D1,$H2#lo,${S4}[0]
-	vmlal.u32	$D2,$H3#lo,${S4}[0]
-
-	vld4.32		{$H0#lo,$H1#lo,$H2#lo,$H3#lo},[$inp]	@ inp[0:1]
-	add		$inp,$inp,#64
-# ifdef	__ARMEB__
-	vrev32.8	$H0,$H0
-	vrev32.8	$H1,$H1
-	vrev32.8	$H2,$H2
-	vrev32.8	$H3,$H3
-# endif
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ lazy reduction interleaved with base 2^32 -> base 2^26 of
-	@ inp[0:3] previously loaded to $H0-$H3 and smashed to $H0-$H4.
-
-	vshr.u64	$T0,$D3,#26
-	vmovn.i64	$D3#lo,$D3
-	 vshr.u64	$T1,$D0,#26
-	 vmovn.i64	$D0#lo,$D0
-	vadd.i64	$D4,$D4,$T0		@ h3 -> h4
-	vbic.i32	$D3#lo,#0xfc000000
-	  vsri.u32	$H4,$H3,#8		@ base 2^32 -> base 2^26
-	 vadd.i64	$D1,$D1,$T1		@ h0 -> h1
-	  vshl.u32	$H3,$H3,#18
-	 vbic.i32	$D0#lo,#0xfc000000
-
-	vshrn.u64	$T0#lo,$D4,#26
-	vmovn.i64	$D4#lo,$D4
-	 vshr.u64	$T1,$D1,#26
-	 vmovn.i64	$D1#lo,$D1
-	 vadd.i64	$D2,$D2,$T1		@ h1 -> h2
-	  vsri.u32	$H3,$H2,#14
-	vbic.i32	$D4#lo,#0xfc000000
-	  vshl.u32	$H2,$H2,#12
-	 vbic.i32	$D1#lo,#0xfc000000
-
-	vadd.i32	$D0#lo,$D0#lo,$T0#lo
-	vshl.u32	$T0#lo,$T0#lo,#2
-	  vbic.i32	$H3,#0xfc000000
-	 vshrn.u64	$T1#lo,$D2,#26
-	 vmovn.i64	$D2#lo,$D2
-	vaddl.u32	$D0,$D0#lo,$T0#lo	@ h4 -> h0 [widen for a sec]
-	  vsri.u32	$H2,$H1,#20
-	 vadd.i32	$D3#lo,$D3#lo,$T1#lo	@ h2 -> h3
-	  vshl.u32	$H1,$H1,#6
-	 vbic.i32	$D2#lo,#0xfc000000
-	  vbic.i32	$H2,#0xfc000000
-
-	vshrn.u64	$T0#lo,$D0,#26		@ re-narrow
-	vmovn.i64	$D0#lo,$D0
-	  vsri.u32	$H1,$H0,#26
-	  vbic.i32	$H0,#0xfc000000
-	 vshr.u32	$T1#lo,$D3#lo,#26
-	 vbic.i32	$D3#lo,#0xfc000000
-	vbic.i32	$D0#lo,#0xfc000000
-	vadd.i32	$D1#lo,$D1#lo,$T0#lo	@ h0 -> h1
-	 vadd.i32	$D4#lo,$D4#lo,$T1#lo	@ h3 -> h4
-	  vbic.i32	$H1,#0xfc000000
-
-	bhi		.Loop_neon
-
-.Lskip_loop:
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1
-
-	add		$tbl1,$ctx,#(48+0*9*4)
-	add		$tbl0,$ctx,#(48+1*9*4)
-	adds		$len,$len,#32
-	it		ne
-	movne		$len,#0
-	bne		.Long_tail
-
-	vadd.i32	$H2#hi,$H2#lo,$D2#lo	@ add hash value and move to #hi
-	vadd.i32	$H0#hi,$H0#lo,$D0#lo
-	vadd.i32	$H3#hi,$H3#lo,$D3#lo
-	vadd.i32	$H1#hi,$H1#lo,$D1#lo
-	vadd.i32	$H4#hi,$H4#lo,$D4#lo
-
-.Long_tail:
-	vld4.32		{${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]!	@ load r^1
-	vld4.32		{${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]!	@ load r^2
-
-	vadd.i32	$H2#lo,$H2#lo,$D2#lo	@ can be redundant
-	vmull.u32	$D2,$H2#hi,$R0
-	vadd.i32	$H0#lo,$H0#lo,$D0#lo
-	vmull.u32	$D0,$H0#hi,$R0
-	vadd.i32	$H3#lo,$H3#lo,$D3#lo
-	vmull.u32	$D3,$H3#hi,$R0
-	vadd.i32	$H1#lo,$H1#lo,$D1#lo
-	vmull.u32	$D1,$H1#hi,$R0
-	vadd.i32	$H4#lo,$H4#lo,$D4#lo
-	vmull.u32	$D4,$H4#hi,$R0
-
-	vmlal.u32	$D0,$H4#hi,$S1
-	vld4.32		{${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
-	vmlal.u32	$D3,$H2#hi,$R1
-	vld4.32		{${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
-	vmlal.u32	$D1,$H0#hi,$R1
-	vmlal.u32	$D4,$H3#hi,$R1
-	vmlal.u32	$D2,$H1#hi,$R1
-
-	vmlal.u32	$D3,$H1#hi,$R2
-	vld1.32		${S4}[1],[$tbl1,:32]
-	vmlal.u32	$D0,$H3#hi,$S2
-	vld1.32		${S4}[0],[$tbl0,:32]
-	vmlal.u32	$D4,$H2#hi,$R2
-	vmlal.u32	$D1,$H4#hi,$S2
-	vmlal.u32	$D2,$H0#hi,$R2
-
-	vmlal.u32	$D3,$H0#hi,$R3
-	 it		ne
-	 addne		$tbl1,$ctx,#(48+2*9*4)
-	vmlal.u32	$D0,$H2#hi,$S3
-	 it		ne
-	 addne		$tbl0,$ctx,#(48+3*9*4)
-	vmlal.u32	$D4,$H1#hi,$R3
-	vmlal.u32	$D1,$H3#hi,$S3
-	vmlal.u32	$D2,$H4#hi,$S3
-
-	vmlal.u32	$D3,$H4#hi,$S4
-	 vorn		$MASK,$MASK,$MASK	@ all-ones, can be redundant
-	vmlal.u32	$D0,$H1#hi,$S4
-	 vshr.u64	$MASK,$MASK,#38
-	vmlal.u32	$D4,$H0#hi,$R4
-	vmlal.u32	$D1,$H2#hi,$S4
-	vmlal.u32	$D2,$H3#hi,$S4
-
-	beq		.Lshort_tail
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ (hash+inp[0:1])*r^4:r^3 and accumulate
-
-	vld4.32		{${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]!	@ load r^3
-	vld4.32		{${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]!	@ load r^4
-
-	vmlal.u32	$D2,$H2#lo,$R0
-	vmlal.u32	$D0,$H0#lo,$R0
-	vmlal.u32	$D3,$H3#lo,$R0
-	vmlal.u32	$D1,$H1#lo,$R0
-	vmlal.u32	$D4,$H4#lo,$R0
-
-	vmlal.u32	$D0,$H4#lo,$S1
-	vld4.32		{${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
-	vmlal.u32	$D3,$H2#lo,$R1
-	vld4.32		{${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
-	vmlal.u32	$D1,$H0#lo,$R1
-	vmlal.u32	$D4,$H3#lo,$R1
-	vmlal.u32	$D2,$H1#lo,$R1
-
-	vmlal.u32	$D3,$H1#lo,$R2
-	vld1.32		${S4}[1],[$tbl1,:32]
-	vmlal.u32	$D0,$H3#lo,$S2
-	vld1.32		${S4}[0],[$tbl0,:32]
-	vmlal.u32	$D4,$H2#lo,$R2
-	vmlal.u32	$D1,$H4#lo,$S2
-	vmlal.u32	$D2,$H0#lo,$R2
-
-	vmlal.u32	$D3,$H0#lo,$R3
-	vmlal.u32	$D0,$H2#lo,$S3
-	vmlal.u32	$D4,$H1#lo,$R3
-	vmlal.u32	$D1,$H3#lo,$S3
-	vmlal.u32	$D2,$H4#lo,$S3
-
-	vmlal.u32	$D3,$H4#lo,$S4
-	 vorn		$MASK,$MASK,$MASK	@ all-ones
-	vmlal.u32	$D0,$H1#lo,$S4
-	 vshr.u64	$MASK,$MASK,#38
-	vmlal.u32	$D4,$H0#lo,$R4
-	vmlal.u32	$D1,$H2#lo,$S4
-	vmlal.u32	$D2,$H3#lo,$S4
-
-.Lshort_tail:
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ horizontal addition
-
-	vadd.i64	$D3#lo,$D3#lo,$D3#hi
-	vadd.i64	$D0#lo,$D0#lo,$D0#hi
-	vadd.i64	$D4#lo,$D4#lo,$D4#hi
-	vadd.i64	$D1#lo,$D1#lo,$D1#hi
-	vadd.i64	$D2#lo,$D2#lo,$D2#hi
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ lazy reduction, but without narrowing
-
-	vshr.u64	$T0,$D3,#26
-	vand.i64	$D3,$D3,$MASK
-	 vshr.u64	$T1,$D0,#26
-	 vand.i64	$D0,$D0,$MASK
-	vadd.i64	$D4,$D4,$T0		@ h3 -> h4
-	 vadd.i64	$D1,$D1,$T1		@ h0 -> h1
-
-	vshr.u64	$T0,$D4,#26
-	vand.i64	$D4,$D4,$MASK
-	 vshr.u64	$T1,$D1,#26
-	 vand.i64	$D1,$D1,$MASK
-	 vadd.i64	$D2,$D2,$T1		@ h1 -> h2
-
-	vadd.i64	$D0,$D0,$T0
-	vshl.u64	$T0,$T0,#2
-	 vshr.u64	$T1,$D2,#26
-	 vand.i64	$D2,$D2,$MASK
-	vadd.i64	$D0,$D0,$T0		@ h4 -> h0
-	 vadd.i64	$D3,$D3,$T1		@ h2 -> h3
-
-	vshr.u64	$T0,$D0,#26
-	vand.i64	$D0,$D0,$MASK
-	 vshr.u64	$T1,$D3,#26
-	 vand.i64	$D3,$D3,$MASK
-	vadd.i64	$D1,$D1,$T0		@ h0 -> h1
-	 vadd.i64	$D4,$D4,$T1		@ h3 -> h4
-
-	cmp		$len,#0
-	bne		.Leven
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ store hash value
-
-	vst4.32		{$D0#lo[0],$D1#lo[0],$D2#lo[0],$D3#lo[0]},[$ctx]!
-	vst1.32		{$D4#lo[0]},[$ctx]
-
-	vldmia	sp!,{d8-d15}			@ epilogue
-	ldmia	sp!,{r4-r7}
-	ret					@ bx	lr
-.size	poly1305_blocks_neon,.-poly1305_blocks_neon
-
-.align	5
-.Lzeros:
-.long	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-#ifndef	__KERNEL__
-.LOPENSSL_armcap:
-# ifdef	_WIN32
-.word	OPENSSL_armcap_P
-# else
-.word	OPENSSL_armcap_P-.Lpoly1305_init
-# endif
-.comm	OPENSSL_armcap_P,4,4
-.hidden	OPENSSL_armcap_P
-#endif
-#endif
-___
-}	}
-$code.=<<___;
-.asciz	"Poly1305 for ARMv4/NEON, CRYPTOGAMS by \@dot-asm"
-.align	2
-___
-
-foreach (split("\n",$code)) {
-	s/\`([^\`]*)\`/eval $1/geo;
-
-	s/\bq([0-9]+)#(lo|hi)/sprintf "d%d",2*$1+($2 eq "hi")/geo	or
-	s/\bret\b/bx	lr/go						or
-	s/\bbx\s+lr\b/.word\t0xe12fff1e/go;	# make it possible to compile with -march=armv4
-
-	print $_,"\n";
-}
-close STDOUT; # enforce flush
diff --git a/arch/arm/crypto/poly1305-glue.c b/arch/arm/crypto/poly1305-glue.c
deleted file mode 100644
index c31bd8f7c092..000000000000
--- a/arch/arm/crypto/poly1305-glue.c
+++ /dev/null
@@ -1,273 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * OpenSSL/Cryptogams accelerated Poly1305 transform for ARM
- *
- * Copyright (C) 2019 Linaro Ltd. <ard.biesheuvel@linaro.org>
- */
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <asm/unaligned.h>
-#include <crypto/algapi.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/poly1305.h>
-#include <crypto/internal/simd.h>
-#include <linux/cpufeature.h>
-#include <linux/crypto.h>
-#include <linux/jump_label.h>
-#include <linux/module.h>
-
-void poly1305_init_arm(void *state, const u8 *key);
-void poly1305_blocks_arm(void *state, const u8 *src, u32 len, u32 hibit);
-void poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit);
-void poly1305_emit_arm(void *state, u8 *digest, const u32 *nonce);
-
-void __weak poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit)
-{
-}
-
-static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
-
-void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
-{
-	poly1305_init_arm(&dctx->h, key);
-	dctx->s[0] = get_unaligned_le32(key + 16);
-	dctx->s[1] = get_unaligned_le32(key + 20);
-	dctx->s[2] = get_unaligned_le32(key + 24);
-	dctx->s[3] = get_unaligned_le32(key + 28);
-	dctx->buflen = 0;
-}
-EXPORT_SYMBOL(poly1305_init_arch);
-
-static int arm_poly1305_init(struct shash_desc *desc)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	dctx->buflen = 0;
-	dctx->rset = 0;
-	dctx->sset = false;
-
-	return 0;
-}
-
-static void arm_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
-				 u32 len, u32 hibit, bool do_neon)
-{
-	if (unlikely(!dctx->sset)) {
-		if (!dctx->rset) {
-			poly1305_init_arm(&dctx->h, src);
-			src += POLY1305_BLOCK_SIZE;
-			len -= POLY1305_BLOCK_SIZE;
-			dctx->rset = 1;
-		}
-		if (len >= POLY1305_BLOCK_SIZE) {
-			dctx->s[0] = get_unaligned_le32(src +  0);
-			dctx->s[1] = get_unaligned_le32(src +  4);
-			dctx->s[2] = get_unaligned_le32(src +  8);
-			dctx->s[3] = get_unaligned_le32(src + 12);
-			src += POLY1305_BLOCK_SIZE;
-			len -= POLY1305_BLOCK_SIZE;
-			dctx->sset = true;
-		}
-		if (len < POLY1305_BLOCK_SIZE)
-			return;
-	}
-
-	len &= ~(POLY1305_BLOCK_SIZE - 1);
-
-	if (static_branch_likely(&have_neon) && likely(do_neon))
-		poly1305_blocks_neon(&dctx->h, src, len, hibit);
-	else
-		poly1305_blocks_arm(&dctx->h, src, len, hibit);
-}
-
-static void arm_poly1305_do_update(struct poly1305_desc_ctx *dctx,
-				    const u8 *src, u32 len, bool do_neon)
-{
-	if (unlikely(dctx->buflen)) {
-		u32 bytes = min(len, POLY1305_BLOCK_SIZE - dctx->buflen);
-
-		memcpy(dctx->buf + dctx->buflen, src, bytes);
-		src += bytes;
-		len -= bytes;
-		dctx->buflen += bytes;
-
-		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-			arm_poly1305_blocks(dctx, dctx->buf,
-					    POLY1305_BLOCK_SIZE, 1, false);
-			dctx->buflen = 0;
-		}
-	}
-
-	if (likely(len >= POLY1305_BLOCK_SIZE)) {
-		arm_poly1305_blocks(dctx, src, len, 1, do_neon);
-		src += round_down(len, POLY1305_BLOCK_SIZE);
-		len %= POLY1305_BLOCK_SIZE;
-	}
-
-	if (unlikely(len)) {
-		dctx->buflen = len;
-		memcpy(dctx->buf, src, len);
-	}
-}
-
-static int arm_poly1305_update(struct shash_desc *desc,
-			       const u8 *src, unsigned int srclen)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	arm_poly1305_do_update(dctx, src, srclen, false);
-	return 0;
-}
-
-static int __maybe_unused arm_poly1305_update_neon(struct shash_desc *desc,
-						   const u8 *src,
-						   unsigned int srclen)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-	bool do_neon = crypto_simd_usable() && srclen > 128;
-
-	if (static_branch_likely(&have_neon) && do_neon)
-		kernel_neon_begin();
-	arm_poly1305_do_update(dctx, src, srclen, do_neon);
-	if (static_branch_likely(&have_neon) && do_neon)
-		kernel_neon_end();
-	return 0;
-}
-
-void poly1305_update_arch(struct poly1305_desc_ctx *dctx, const u8 *src,
-			  unsigned int nbytes)
-{
-	bool do_neon = IS_ENABLED(CONFIG_KERNEL_MODE_NEON) &&
-		       crypto_simd_usable();
-
-	if (unlikely(dctx->buflen)) {
-		u32 bytes = min(nbytes, POLY1305_BLOCK_SIZE - dctx->buflen);
-
-		memcpy(dctx->buf + dctx->buflen, src, bytes);
-		src += bytes;
-		nbytes -= bytes;
-		dctx->buflen += bytes;
-
-		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-			poly1305_blocks_arm(&dctx->h, dctx->buf,
-					    POLY1305_BLOCK_SIZE, 1);
-			dctx->buflen = 0;
-		}
-	}
-
-	if (likely(nbytes >= POLY1305_BLOCK_SIZE)) {
-		unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE);
-
-		if (static_branch_likely(&have_neon) && do_neon) {
-			do {
-				unsigned int todo = min_t(unsigned int, len, SZ_4K);
-
-				kernel_neon_begin();
-				poly1305_blocks_neon(&dctx->h, src, todo, 1);
-				kernel_neon_end();
-
-				len -= todo;
-				src += todo;
-			} while (len);
-		} else {
-			poly1305_blocks_arm(&dctx->h, src, len, 1);
-			src += len;
-		}
-		nbytes %= POLY1305_BLOCK_SIZE;
-	}
-
-	if (unlikely(nbytes)) {
-		dctx->buflen = nbytes;
-		memcpy(dctx->buf, src, nbytes);
-	}
-}
-EXPORT_SYMBOL(poly1305_update_arch);
-
-void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst)
-{
-	if (unlikely(dctx->buflen)) {
-		dctx->buf[dctx->buflen++] = 1;
-		memset(dctx->buf + dctx->buflen, 0,
-		       POLY1305_BLOCK_SIZE - dctx->buflen);
-		poly1305_blocks_arm(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0);
-	}
-
-	poly1305_emit_arm(&dctx->h, dst, dctx->s);
-	*dctx = (struct poly1305_desc_ctx){};
-}
-EXPORT_SYMBOL(poly1305_final_arch);
-
-static int arm_poly1305_final(struct shash_desc *desc, u8 *dst)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	if (unlikely(!dctx->sset))
-		return -ENOKEY;
-
-	poly1305_final_arch(dctx, dst);
-	return 0;
-}
-
-static struct shash_alg arm_poly1305_algs[] = {{
-	.init			= arm_poly1305_init,
-	.update			= arm_poly1305_update,
-	.final			= arm_poly1305_final,
-	.digestsize		= POLY1305_DIGEST_SIZE,
-	.descsize		= sizeof(struct poly1305_desc_ctx),
-
-	.base.cra_name		= "poly1305",
-	.base.cra_driver_name	= "poly1305-arm",
-	.base.cra_priority	= 150,
-	.base.cra_blocksize	= POLY1305_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-#ifdef CONFIG_KERNEL_MODE_NEON
-}, {
-	.init			= arm_poly1305_init,
-	.update			= arm_poly1305_update_neon,
-	.final			= arm_poly1305_final,
-	.digestsize		= POLY1305_DIGEST_SIZE,
-	.descsize		= sizeof(struct poly1305_desc_ctx),
-
-	.base.cra_name		= "poly1305",
-	.base.cra_driver_name	= "poly1305-neon",
-	.base.cra_priority	= 200,
-	.base.cra_blocksize	= POLY1305_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-#endif
-}};
-
-static int __init arm_poly1305_mod_init(void)
-{
-	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) &&
-	    (elf_hwcap & HWCAP_NEON))
-		static_branch_enable(&have_neon);
-	else if (IS_REACHABLE(CONFIG_CRYPTO_HASH))
-		/* register only the first entry */
-		return crypto_register_shash(&arm_poly1305_algs[0]);
-
-	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
-		crypto_register_shashes(arm_poly1305_algs,
-					ARRAY_SIZE(arm_poly1305_algs)) : 0;
-}
-
-static void __exit arm_poly1305_mod_exit(void)
-{
-	if (!IS_REACHABLE(CONFIG_CRYPTO_HASH))
-		return;
-	if (!static_branch_likely(&have_neon)) {
-		crypto_unregister_shash(&arm_poly1305_algs[0]);
-		return;
-	}
-	crypto_unregister_shashes(arm_poly1305_algs,
-				  ARRAY_SIZE(arm_poly1305_algs));
-}
-
-module_init(arm_poly1305_mod_init);
-module_exit(arm_poly1305_mod_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("poly1305");
-MODULE_ALIAS_CRYPTO("poly1305-arm");
-MODULE_ALIAS_CRYPTO("poly1305-neon");
diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S
deleted file mode 100644
index 1c8b685149f2..000000000000
--- a/arch/arm/crypto/sha1-armv4-large.S
+++ /dev/null
@@ -1,507 +0,0 @@
-#define __ARM_ARCH__ __LINUX_ARM_ARCH__
-@ SPDX-License-Identifier: GPL-2.0
-
-@ This code is taken from the OpenSSL project but the author (Andy Polyakov)
-@ has relicensed it under the GPLv2. Therefore this program is free software;
-@ you can redistribute it and/or modify it under the terms of the GNU General
-@ Public License version 2 as published by the Free Software Foundation.
-@
-@ The original headers, including the original license headers, are
-@ included below for completeness.
-
-@ ====================================================================
-@ Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-@ project. The module is, however, dual licensed under OpenSSL and
-@ CRYPTOGAMS licenses depending on where you obtain it. For further
-@ details see https://www.openssl.org/~appro/cryptogams/.
-@ ====================================================================
-
-@ sha1_block procedure for ARMv4.
-@
-@ January 2007.
-
-@ Size/performance trade-off
-@ ====================================================================
-@ impl		size in bytes	comp cycles[*]	measured performance
-@ ====================================================================
-@ thumb		304		3212		4420
-@ armv4-small	392/+29%	1958/+64%	2250/+96%
-@ armv4-compact	740/+89%	1552/+26%	1840/+22%
-@ armv4-large	1420/+92%	1307/+19%	1370/+34%[***]
-@ full unroll	~5100/+260%	~1260/+4%	~1300/+5%
-@ ====================================================================
-@ thumb		= same as 'small' but in Thumb instructions[**] and
-@		  with recurring code in two private functions;
-@ small		= detached Xload/update, loops are folded;
-@ compact	= detached Xload/update, 5x unroll;
-@ large		= interleaved Xload/update, 5x unroll;
-@ full unroll	= interleaved Xload/update, full unroll, estimated[!];
-@
-@ [*]	Manually counted instructions in "grand" loop body. Measured
-@	performance is affected by prologue and epilogue overhead,
-@	i-cache availability, branch penalties, etc.
-@ [**]	While each Thumb instruction is twice smaller, they are not as
-@	diverse as ARM ones: e.g., there are only two arithmetic
-@	instructions with 3 arguments, no [fixed] rotate, addressing
-@	modes are limited. As result it takes more instructions to do
-@	the same job in Thumb, therefore the code is never twice as
-@	small and always slower.
-@ [***]	which is also ~35% better than compiler generated code. Dual-
-@	issue Cortex A8 core was measured to process input block in
-@	~990 cycles.
-
-@ August 2010.
-@
-@ Rescheduling for dual-issue pipeline resulted in 13% improvement on
-@ Cortex A8 core and in absolute terms ~870 cycles per input block
-@ [or 13.6 cycles per byte].
-
-@ February 2011.
-@
-@ Profiler-assisted and platform-specific optimization resulted in 10%
-@ improvement on Cortex A8 core and 12.2 cycles per byte.
-
-#include <linux/linkage.h>
-
-.text
-
-.align	2
-ENTRY(sha1_block_data_order)
-	stmdb	sp!,{r4-r12,lr}
-	add	r2,r1,r2,lsl#6	@ r2 to point at the end of r1
-	ldmia	r0,{r3,r4,r5,r6,r7}
-.Lloop:
-	ldr	r8,.LK_00_19
-	mov	r14,sp
-	sub	sp,sp,#15*4
-	mov	r5,r5,ror#30
-	mov	r6,r6,ror#30
-	mov	r7,r7,ror#30		@ [6]
-.L_00_15:
-#if __ARM_ARCH__<7
-	ldrb	r10,[r1,#2]
-	ldrb	r9,[r1,#3]
-	ldrb	r11,[r1,#1]
-	add	r7,r8,r7,ror#2			@ E+=K_00_19
-	ldrb	r12,[r1],#4
-	orr	r9,r9,r10,lsl#8
-	eor	r10,r5,r6			@ F_xx_xx
-	orr	r9,r9,r11,lsl#16
-	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
-	orr	r9,r9,r12,lsl#24
-#else
-	ldr	r9,[r1],#4			@ handles unaligned
-	add	r7,r8,r7,ror#2			@ E+=K_00_19
-	eor	r10,r5,r6			@ F_xx_xx
-	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
-#ifdef __ARMEL__
-	rev	r9,r9				@ byte swap
-#endif
-#endif
-	and	r10,r4,r10,ror#2
-	add	r7,r7,r9			@ E+=X[i]
-	eor	r10,r10,r6,ror#2		@ F_00_19(B,C,D)
-	str	r9,[r14,#-4]!
-	add	r7,r7,r10			@ E+=F_00_19(B,C,D)
-#if __ARM_ARCH__<7
-	ldrb	r10,[r1,#2]
-	ldrb	r9,[r1,#3]
-	ldrb	r11,[r1,#1]
-	add	r6,r8,r6,ror#2			@ E+=K_00_19
-	ldrb	r12,[r1],#4
-	orr	r9,r9,r10,lsl#8
-	eor	r10,r4,r5			@ F_xx_xx
-	orr	r9,r9,r11,lsl#16
-	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
-	orr	r9,r9,r12,lsl#24
-#else
-	ldr	r9,[r1],#4			@ handles unaligned
-	add	r6,r8,r6,ror#2			@ E+=K_00_19
-	eor	r10,r4,r5			@ F_xx_xx
-	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
-#ifdef __ARMEL__
-	rev	r9,r9				@ byte swap
-#endif
-#endif
-	and	r10,r3,r10,ror#2
-	add	r6,r6,r9			@ E+=X[i]
-	eor	r10,r10,r5,ror#2		@ F_00_19(B,C,D)
-	str	r9,[r14,#-4]!
-	add	r6,r6,r10			@ E+=F_00_19(B,C,D)
-#if __ARM_ARCH__<7
-	ldrb	r10,[r1,#2]
-	ldrb	r9,[r1,#3]
-	ldrb	r11,[r1,#1]
-	add	r5,r8,r5,ror#2			@ E+=K_00_19
-	ldrb	r12,[r1],#4
-	orr	r9,r9,r10,lsl#8
-	eor	r10,r3,r4			@ F_xx_xx
-	orr	r9,r9,r11,lsl#16
-	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
-	orr	r9,r9,r12,lsl#24
-#else
-	ldr	r9,[r1],#4			@ handles unaligned
-	add	r5,r8,r5,ror#2			@ E+=K_00_19
-	eor	r10,r3,r4			@ F_xx_xx
-	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
-#ifdef __ARMEL__
-	rev	r9,r9				@ byte swap
-#endif
-#endif
-	and	r10,r7,r10,ror#2
-	add	r5,r5,r9			@ E+=X[i]
-	eor	r10,r10,r4,ror#2		@ F_00_19(B,C,D)
-	str	r9,[r14,#-4]!
-	add	r5,r5,r10			@ E+=F_00_19(B,C,D)
-#if __ARM_ARCH__<7
-	ldrb	r10,[r1,#2]
-	ldrb	r9,[r1,#3]
-	ldrb	r11,[r1,#1]
-	add	r4,r8,r4,ror#2			@ E+=K_00_19
-	ldrb	r12,[r1],#4
-	orr	r9,r9,r10,lsl#8
-	eor	r10,r7,r3			@ F_xx_xx
-	orr	r9,r9,r11,lsl#16
-	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
-	orr	r9,r9,r12,lsl#24
-#else
-	ldr	r9,[r1],#4			@ handles unaligned
-	add	r4,r8,r4,ror#2			@ E+=K_00_19
-	eor	r10,r7,r3			@ F_xx_xx
-	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
-#ifdef __ARMEL__
-	rev	r9,r9				@ byte swap
-#endif
-#endif
-	and	r10,r6,r10,ror#2
-	add	r4,r4,r9			@ E+=X[i]
-	eor	r10,r10,r3,ror#2		@ F_00_19(B,C,D)
-	str	r9,[r14,#-4]!
-	add	r4,r4,r10			@ E+=F_00_19(B,C,D)
-#if __ARM_ARCH__<7
-	ldrb	r10,[r1,#2]
-	ldrb	r9,[r1,#3]
-	ldrb	r11,[r1,#1]
-	add	r3,r8,r3,ror#2			@ E+=K_00_19
-	ldrb	r12,[r1],#4
-	orr	r9,r9,r10,lsl#8
-	eor	r10,r6,r7			@ F_xx_xx
-	orr	r9,r9,r11,lsl#16
-	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
-	orr	r9,r9,r12,lsl#24
-#else
-	ldr	r9,[r1],#4			@ handles unaligned
-	add	r3,r8,r3,ror#2			@ E+=K_00_19
-	eor	r10,r6,r7			@ F_xx_xx
-	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
-#ifdef __ARMEL__
-	rev	r9,r9				@ byte swap
-#endif
-#endif
-	and	r10,r5,r10,ror#2
-	add	r3,r3,r9			@ E+=X[i]
-	eor	r10,r10,r7,ror#2		@ F_00_19(B,C,D)
-	str	r9,[r14,#-4]!
-	add	r3,r3,r10			@ E+=F_00_19(B,C,D)
-	cmp	r14,sp
-	bne	.L_00_15		@ [((11+4)*5+2)*3]
-	sub	sp,sp,#25*4
-#if __ARM_ARCH__<7
-	ldrb	r10,[r1,#2]
-	ldrb	r9,[r1,#3]
-	ldrb	r11,[r1,#1]
-	add	r7,r8,r7,ror#2			@ E+=K_00_19
-	ldrb	r12,[r1],#4
-	orr	r9,r9,r10,lsl#8
-	eor	r10,r5,r6			@ F_xx_xx
-	orr	r9,r9,r11,lsl#16
-	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
-	orr	r9,r9,r12,lsl#24
-#else
-	ldr	r9,[r1],#4			@ handles unaligned
-	add	r7,r8,r7,ror#2			@ E+=K_00_19
-	eor	r10,r5,r6			@ F_xx_xx
-	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
-#ifdef __ARMEL__
-	rev	r9,r9				@ byte swap
-#endif
-#endif
-	and	r10,r4,r10,ror#2
-	add	r7,r7,r9			@ E+=X[i]
-	eor	r10,r10,r6,ror#2		@ F_00_19(B,C,D)
-	str	r9,[r14,#-4]!
-	add	r7,r7,r10			@ E+=F_00_19(B,C,D)
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r6,r8,r6,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r4,r5			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	and r10,r3,r10,ror#2					@ F_xx_xx
-						@ F_xx_xx
-	add	r6,r6,r9			@ E+=X[i]
-	eor	r10,r10,r5,ror#2		@ F_00_19(B,C,D)
-	add	r6,r6,r10			@ E+=F_00_19(B,C,D)
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r5,r8,r5,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r3,r4			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	and r10,r7,r10,ror#2					@ F_xx_xx
-						@ F_xx_xx
-	add	r5,r5,r9			@ E+=X[i]
-	eor	r10,r10,r4,ror#2		@ F_00_19(B,C,D)
-	add	r5,r5,r10			@ E+=F_00_19(B,C,D)
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r4,r8,r4,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r7,r3			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	and r10,r6,r10,ror#2					@ F_xx_xx
-						@ F_xx_xx
-	add	r4,r4,r9			@ E+=X[i]
-	eor	r10,r10,r3,ror#2		@ F_00_19(B,C,D)
-	add	r4,r4,r10			@ E+=F_00_19(B,C,D)
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r3,r8,r3,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r6,r7			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	and r10,r5,r10,ror#2					@ F_xx_xx
-						@ F_xx_xx
-	add	r3,r3,r9			@ E+=X[i]
-	eor	r10,r10,r7,ror#2		@ F_00_19(B,C,D)
-	add	r3,r3,r10			@ E+=F_00_19(B,C,D)
-
-	ldr	r8,.LK_20_39		@ [+15+16*4]
-	cmn	sp,#0			@ [+3], clear carry to denote 20_39
-.L_20_39_or_60_79:
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r7,r8,r7,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r5,r6			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	eor r10,r4,r10,ror#2					@ F_xx_xx
-						@ F_xx_xx
-	add	r7,r7,r9			@ E+=X[i]
-	add	r7,r7,r10			@ E+=F_20_39(B,C,D)
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r6,r8,r6,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r4,r5			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	eor r10,r3,r10,ror#2					@ F_xx_xx
-						@ F_xx_xx
-	add	r6,r6,r9			@ E+=X[i]
-	add	r6,r6,r10			@ E+=F_20_39(B,C,D)
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r5,r8,r5,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r3,r4			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	eor r10,r7,r10,ror#2					@ F_xx_xx
-						@ F_xx_xx
-	add	r5,r5,r9			@ E+=X[i]
-	add	r5,r5,r10			@ E+=F_20_39(B,C,D)
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r4,r8,r4,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r7,r3			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	eor r10,r6,r10,ror#2					@ F_xx_xx
-						@ F_xx_xx
-	add	r4,r4,r9			@ E+=X[i]
-	add	r4,r4,r10			@ E+=F_20_39(B,C,D)
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r3,r8,r3,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r6,r7			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	eor r10,r5,r10,ror#2					@ F_xx_xx
-						@ F_xx_xx
-	add	r3,r3,r9			@ E+=X[i]
-	add	r3,r3,r10			@ E+=F_20_39(B,C,D)
- ARM(	teq	r14,sp		)	@ preserve carry
- THUMB(	mov	r11,sp		)
- THUMB(	teq	r14,r11		)	@ preserve carry
-	bne	.L_20_39_or_60_79	@ [+((12+3)*5+2)*4]
-	bcs	.L_done			@ [+((12+3)*5+2)*4], spare 300 bytes
-
-	ldr	r8,.LK_40_59
-	sub	sp,sp,#20*4		@ [+2]
-.L_40_59:
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r7,r8,r7,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r5,r6			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	and r10,r4,r10,ror#2					@ F_xx_xx
-	and r11,r5,r6					@ F_xx_xx
-	add	r7,r7,r9			@ E+=X[i]
-	add	r7,r7,r10			@ E+=F_40_59(B,C,D)
-	add	r7,r7,r11,ror#2
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r6,r8,r6,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r4,r5			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	and r10,r3,r10,ror#2					@ F_xx_xx
-	and r11,r4,r5					@ F_xx_xx
-	add	r6,r6,r9			@ E+=X[i]
-	add	r6,r6,r10			@ E+=F_40_59(B,C,D)
-	add	r6,r6,r11,ror#2
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r5,r8,r5,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r3,r4			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	and r10,r7,r10,ror#2					@ F_xx_xx
-	and r11,r3,r4					@ F_xx_xx
-	add	r5,r5,r9			@ E+=X[i]
-	add	r5,r5,r10			@ E+=F_40_59(B,C,D)
-	add	r5,r5,r11,ror#2
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r4,r8,r4,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r7,r3			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	and r10,r6,r10,ror#2					@ F_xx_xx
-	and r11,r7,r3					@ F_xx_xx
-	add	r4,r4,r9			@ E+=X[i]
-	add	r4,r4,r10			@ E+=F_40_59(B,C,D)
-	add	r4,r4,r11,ror#2
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r3,r8,r3,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r6,r7			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	and r10,r5,r10,ror#2					@ F_xx_xx
-	and r11,r6,r7					@ F_xx_xx
-	add	r3,r3,r9			@ E+=X[i]
-	add	r3,r3,r10			@ E+=F_40_59(B,C,D)
-	add	r3,r3,r11,ror#2
-	cmp	r14,sp
-	bne	.L_40_59		@ [+((12+5)*5+2)*4]
-
-	ldr	r8,.LK_60_79
-	sub	sp,sp,#20*4
-	cmp	sp,#0			@ set carry to denote 60_79
-	b	.L_20_39_or_60_79	@ [+4], spare 300 bytes
-.L_done:
-	add	sp,sp,#80*4		@ "deallocate" stack frame
-	ldmia	r0,{r8,r9,r10,r11,r12}
-	add	r3,r8,r3
-	add	r4,r9,r4
-	add	r5,r10,r5,ror#2
-	add	r6,r11,r6,ror#2
-	add	r7,r12,r7,ror#2
-	stmia	r0,{r3,r4,r5,r6,r7}
-	teq	r1,r2
-	bne	.Lloop			@ [+18], total 1307
-
-	ldmia	sp!,{r4-r12,pc}
-.align	2
-.LK_00_19:	.word	0x5a827999
-.LK_20_39:	.word	0x6ed9eba1
-.LK_40_59:	.word	0x8f1bbcdc
-.LK_60_79:	.word	0xca62c1d6
-ENDPROC(sha1_block_data_order)
-.asciz	"SHA1 block transform for ARMv4, CRYPTOGAMS by <appro@openssl.org>"
-.align	2
diff --git a/arch/arm/crypto/sha1-armv7-neon.S b/arch/arm/crypto/sha1-armv7-neon.S
deleted file mode 100644
index 28d816a6a530..000000000000
--- a/arch/arm/crypto/sha1-armv7-neon.S
+++ /dev/null
@@ -1,634 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/* sha1-armv7-neon.S - ARM/NEON accelerated SHA-1 transform function
- *
- * Copyright © 2013-2014 Jussi Kivilinna <jussi.kivilinna@iki.fi>
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-.syntax unified
-.fpu neon
-
-.text
-
-
-/* Context structure */
-
-#define state_h0 0
-#define state_h1 4
-#define state_h2 8
-#define state_h3 12
-#define state_h4 16
-
-
-/* Constants */
-
-#define K1  0x5A827999
-#define K2  0x6ED9EBA1
-#define K3  0x8F1BBCDC
-#define K4  0xCA62C1D6
-.align 4
-.LK_VEC:
-.LK1:	.long K1, K1, K1, K1
-.LK2:	.long K2, K2, K2, K2
-.LK3:	.long K3, K3, K3, K3
-.LK4:	.long K4, K4, K4, K4
-
-
-/* Register macros */
-
-#define RSTATE r0
-#define RDATA r1
-#define RNBLKS r2
-#define ROLDSTACK r3
-#define RWK lr
-
-#define _a r4
-#define _b r5
-#define _c r6
-#define _d r7
-#define _e r8
-
-#define RT0 r9
-#define RT1 r10
-#define RT2 r11
-#define RT3 r12
-
-#define W0 q0
-#define W1 q7
-#define W2 q2
-#define W3 q3
-#define W4 q4
-#define W5 q6
-#define W6 q5
-#define W7 q1
-
-#define tmp0 q8
-#define tmp1 q9
-#define tmp2 q10
-#define tmp3 q11
-
-#define qK1 q12
-#define qK2 q13
-#define qK3 q14
-#define qK4 q15
-
-#ifdef CONFIG_CPU_BIG_ENDIAN
-#define ARM_LE(code...)
-#else
-#define ARM_LE(code...)		code
-#endif
-
-/* Round function macros. */
-
-#define WK_offs(i) (((i) & 15) * 4)
-
-#define _R_F1(a,b,c,d,e,i,pre1,pre2,pre3,i16,\
-	      W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	ldr RT3, [sp, WK_offs(i)]; \
-		pre1(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \
-	bic RT0, d, b; \
-	add e, e, a, ror #(32 - 5); \
-	and RT1, c, b; \
-		pre2(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \
-	add RT0, RT0, RT3; \
-	add e, e, RT1; \
-	ror b, #(32 - 30); \
-		pre3(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \
-	add e, e, RT0;
-
-#define _R_F2(a,b,c,d,e,i,pre1,pre2,pre3,i16,\
-	      W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	ldr RT3, [sp, WK_offs(i)]; \
-		pre1(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \
-	eor RT0, d, b; \
-	add e, e, a, ror #(32 - 5); \
-	eor RT0, RT0, c; \
-		pre2(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \
-	add e, e, RT3; \
-	ror b, #(32 - 30); \
-		pre3(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \
-	add e, e, RT0; \
-
-#define _R_F3(a,b,c,d,e,i,pre1,pre2,pre3,i16,\
-	      W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	ldr RT3, [sp, WK_offs(i)]; \
-		pre1(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \
-	eor RT0, b, c; \
-	and RT1, b, c; \
-	add e, e, a, ror #(32 - 5); \
-		pre2(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \
-	and RT0, RT0, d; \
-	add RT1, RT1, RT3; \
-	add e, e, RT0; \
-	ror b, #(32 - 30); \
-		pre3(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \
-	add e, e, RT1;
-
-#define _R_F4(a,b,c,d,e,i,pre1,pre2,pre3,i16,\
-	      W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	_R_F2(a,b,c,d,e,i,pre1,pre2,pre3,i16,\
-	      W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28)
-
-#define _R(a,b,c,d,e,f,i,pre1,pre2,pre3,i16,\
-           W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	_R_##f(a,b,c,d,e,i,pre1,pre2,pre3,i16,\
-	       W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28)
-
-#define R(a,b,c,d,e,f,i) \
-	_R_##f(a,b,c,d,e,i,dummy,dummy,dummy,i16,\
-	       W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28)
-
-#define dummy(...)
-
-
-/* Input expansion macros. */
-
-/********* Precalc macros for rounds 0-15 *************************************/
-
-#define W_PRECALC_00_15() \
-	add       RWK, sp, #(WK_offs(0));			\
-	\
-	vld1.32   {W0, W7}, [RDATA]!;				\
- ARM_LE(vrev32.8  W0, W0;	)	/* big => little */	\
-	vld1.32   {W6, W5}, [RDATA]!;				\
-	vadd.u32  tmp0, W0, curK;				\
- ARM_LE(vrev32.8  W7, W7;	)	/* big => little */	\
- ARM_LE(vrev32.8  W6, W6;	)	/* big => little */	\
-	vadd.u32  tmp1, W7, curK;				\
- ARM_LE(vrev32.8  W5, W5;	)	/* big => little */	\
-	vadd.u32  tmp2, W6, curK;				\
-	vst1.32   {tmp0, tmp1}, [RWK]!;				\
-	vadd.u32  tmp3, W5, curK;				\
-	vst1.32   {tmp2, tmp3}, [RWK];				\
-
-#define WPRECALC_00_15_0(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vld1.32   {W0, W7}, [RDATA]!;				\
-
-#define WPRECALC_00_15_1(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	add       RWK, sp, #(WK_offs(0));			\
-
-#define WPRECALC_00_15_2(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
- ARM_LE(vrev32.8  W0, W0;	)	/* big => little */	\
-
-#define WPRECALC_00_15_3(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vld1.32   {W6, W5}, [RDATA]!;				\
-
-#define WPRECALC_00_15_4(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vadd.u32  tmp0, W0, curK;				\
-
-#define WPRECALC_00_15_5(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
- ARM_LE(vrev32.8  W7, W7;	)	/* big => little */	\
-
-#define WPRECALC_00_15_6(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
- ARM_LE(vrev32.8  W6, W6;	)	/* big => little */	\
-
-#define WPRECALC_00_15_7(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vadd.u32  tmp1, W7, curK;				\
-
-#define WPRECALC_00_15_8(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
- ARM_LE(vrev32.8  W5, W5;	)	/* big => little */	\
-
-#define WPRECALC_00_15_9(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vadd.u32  tmp2, W6, curK;				\
-
-#define WPRECALC_00_15_10(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vst1.32   {tmp0, tmp1}, [RWK]!;				\
-
-#define WPRECALC_00_15_11(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vadd.u32  tmp3, W5, curK;				\
-
-#define WPRECALC_00_15_12(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vst1.32   {tmp2, tmp3}, [RWK];				\
-
-
-/********* Precalc macros for rounds 16-31 ************************************/
-
-#define WPRECALC_16_31_0(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	veor      tmp0, tmp0;			\
-	vext.8    W, W_m16, W_m12, #8;		\
-
-#define WPRECALC_16_31_1(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	add       RWK, sp, #(WK_offs(i));	\
-	vext.8    tmp0, W_m04, tmp0, #4;	\
-
-#define WPRECALC_16_31_2(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	veor      tmp0, tmp0, W_m16;		\
-	veor.32   W, W, W_m08;			\
-
-#define WPRECALC_16_31_3(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	veor      tmp1, tmp1;			\
-	veor      W, W, tmp0;			\
-
-#define WPRECALC_16_31_4(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vshl.u32  tmp0, W, #1;			\
-
-#define WPRECALC_16_31_5(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vext.8    tmp1, tmp1, W, #(16-12);	\
-	vshr.u32  W, W, #31;			\
-
-#define WPRECALC_16_31_6(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vorr      tmp0, tmp0, W;		\
-	vshr.u32  W, tmp1, #30;			\
-
-#define WPRECALC_16_31_7(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vshl.u32  tmp1, tmp1, #2;		\
-
-#define WPRECALC_16_31_8(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	veor      tmp0, tmp0, W;		\
-
-#define WPRECALC_16_31_9(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	veor      W, tmp0, tmp1;		\
-
-#define WPRECALC_16_31_10(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vadd.u32  tmp0, W, curK;		\
-
-#define WPRECALC_16_31_11(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vst1.32   {tmp0}, [RWK];
-
-
-/********* Precalc macros for rounds 32-79 ************************************/
-
-#define WPRECALC_32_79_0(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	veor W, W_m28; \
-
-#define WPRECALC_32_79_1(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vext.8 tmp0, W_m08, W_m04, #8; \
-
-#define WPRECALC_32_79_2(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	veor W, W_m16; \
-
-#define WPRECALC_32_79_3(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	veor W, tmp0; \
-
-#define WPRECALC_32_79_4(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	add RWK, sp, #(WK_offs(i&~3)); \
-
-#define WPRECALC_32_79_5(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vshl.u32 tmp1, W, #2; \
-
-#define WPRECALC_32_79_6(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vshr.u32 tmp0, W, #30; \
-
-#define WPRECALC_32_79_7(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vorr W, tmp0, tmp1; \
-
-#define WPRECALC_32_79_8(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vadd.u32 tmp0, W, curK; \
-
-#define WPRECALC_32_79_9(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vst1.32 {tmp0}, [RWK];
-
-
-/*
- * Transform nblks*64 bytes (nblks*16 32-bit words) at DATA.
- *
- * unsigned int
- * sha1_transform_neon (void *ctx, const unsigned char *data,
- *                      unsigned int nblks)
- */
-.align 3
-ENTRY(sha1_transform_neon)
-  /* input:
-   *	r0: ctx, CTX
-   *	r1: data (64*nblks bytes)
-   *	r2: nblks
-   */
-
-  cmp RNBLKS, #0;
-  beq .Ldo_nothing;
-
-  push {r4-r12, lr};
-  /*vpush {q4-q7};*/
-
-  adr RT3, .LK_VEC;
-
-  mov ROLDSTACK, sp;
-
-  /* Align stack. */
-  sub RT0, sp, #(16*4);
-  and RT0, #(~(16-1));
-  mov sp, RT0;
-
-  vld1.32 {qK1-qK2}, [RT3]!; /* Load K1,K2 */
-
-  /* Get the values of the chaining variables. */
-  ldm RSTATE, {_a-_e};
-
-  vld1.32 {qK3-qK4}, [RT3]; /* Load K3,K4 */
-
-#undef curK
-#define curK qK1
-  /* Precalc 0-15. */
-  W_PRECALC_00_15();
-
-.Loop:
-  /* Transform 0-15 + Precalc 16-31. */
-  _R( _a, _b, _c, _d, _e, F1,  0,
-      WPRECALC_16_31_0, WPRECALC_16_31_1, WPRECALC_16_31_2, 16,
-      W4, W5, W6, W7, W0, _, _, _ );
-  _R( _e, _a, _b, _c, _d, F1,  1,
-      WPRECALC_16_31_3, WPRECALC_16_31_4, WPRECALC_16_31_5, 16,
-      W4, W5, W6, W7, W0, _, _, _ );
-  _R( _d, _e, _a, _b, _c, F1,  2,
-      WPRECALC_16_31_6, WPRECALC_16_31_7, WPRECALC_16_31_8, 16,
-      W4, W5, W6, W7, W0, _, _, _ );
-  _R( _c, _d, _e, _a, _b, F1,  3,
-      WPRECALC_16_31_9, WPRECALC_16_31_10,WPRECALC_16_31_11,16,
-      W4, W5, W6, W7, W0, _, _, _ );
-
-#undef curK
-#define curK qK2
-  _R( _b, _c, _d, _e, _a, F1,  4,
-      WPRECALC_16_31_0, WPRECALC_16_31_1, WPRECALC_16_31_2, 20,
-      W3, W4, W5, W6, W7, _, _, _ );
-  _R( _a, _b, _c, _d, _e, F1,  5,
-      WPRECALC_16_31_3, WPRECALC_16_31_4, WPRECALC_16_31_5, 20,
-      W3, W4, W5, W6, W7, _, _, _ );
-  _R( _e, _a, _b, _c, _d, F1,  6,
-      WPRECALC_16_31_6, WPRECALC_16_31_7, WPRECALC_16_31_8, 20,
-      W3, W4, W5, W6, W7, _, _, _ );
-  _R( _d, _e, _a, _b, _c, F1,  7,
-      WPRECALC_16_31_9, WPRECALC_16_31_10,WPRECALC_16_31_11,20,
-      W3, W4, W5, W6, W7, _, _, _ );
-
-  _R( _c, _d, _e, _a, _b, F1,  8,
-      WPRECALC_16_31_0, WPRECALC_16_31_1, WPRECALC_16_31_2, 24,
-      W2, W3, W4, W5, W6, _, _, _ );
-  _R( _b, _c, _d, _e, _a, F1,  9,
-      WPRECALC_16_31_3, WPRECALC_16_31_4, WPRECALC_16_31_5, 24,
-      W2, W3, W4, W5, W6, _, _, _ );
-  _R( _a, _b, _c, _d, _e, F1, 10,
-      WPRECALC_16_31_6, WPRECALC_16_31_7, WPRECALC_16_31_8, 24,
-      W2, W3, W4, W5, W6, _, _, _ );
-  _R( _e, _a, _b, _c, _d, F1, 11,
-      WPRECALC_16_31_9, WPRECALC_16_31_10,WPRECALC_16_31_11,24,
-      W2, W3, W4, W5, W6, _, _, _ );
-
-  _R( _d, _e, _a, _b, _c, F1, 12,
-      WPRECALC_16_31_0, WPRECALC_16_31_1, WPRECALC_16_31_2, 28,
-      W1, W2, W3, W4, W5, _, _, _ );
-  _R( _c, _d, _e, _a, _b, F1, 13,
-      WPRECALC_16_31_3, WPRECALC_16_31_4, WPRECALC_16_31_5, 28,
-      W1, W2, W3, W4, W5, _, _, _ );
-  _R( _b, _c, _d, _e, _a, F1, 14,
-      WPRECALC_16_31_6, WPRECALC_16_31_7, WPRECALC_16_31_8, 28,
-      W1, W2, W3, W4, W5, _, _, _ );
-  _R( _a, _b, _c, _d, _e, F1, 15,
-      WPRECALC_16_31_9, WPRECALC_16_31_10,WPRECALC_16_31_11,28,
-      W1, W2, W3, W4, W5, _, _, _ );
-
-  /* Transform 16-63 + Precalc 32-79. */
-  _R( _e, _a, _b, _c, _d, F1, 16,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 32,
-      W0, W1, W2, W3, W4, W5, W6, W7);
-  _R( _d, _e, _a, _b, _c, F1, 17,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 32,
-      W0, W1, W2, W3, W4, W5, W6, W7);
-  _R( _c, _d, _e, _a, _b, F1, 18,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 32,
-      W0, W1, W2, W3, W4, W5, W6, W7);
-  _R( _b, _c, _d, _e, _a, F1, 19,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 32,
-      W0, W1, W2, W3, W4, W5, W6, W7);
-
-  _R( _a, _b, _c, _d, _e, F2, 20,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 36,
-      W7, W0, W1, W2, W3, W4, W5, W6);
-  _R( _e, _a, _b, _c, _d, F2, 21,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 36,
-      W7, W0, W1, W2, W3, W4, W5, W6);
-  _R( _d, _e, _a, _b, _c, F2, 22,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 36,
-      W7, W0, W1, W2, W3, W4, W5, W6);
-  _R( _c, _d, _e, _a, _b, F2, 23,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 36,
-      W7, W0, W1, W2, W3, W4, W5, W6);
-
-#undef curK
-#define curK qK3
-  _R( _b, _c, _d, _e, _a, F2, 24,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 40,
-      W6, W7, W0, W1, W2, W3, W4, W5);
-  _R( _a, _b, _c, _d, _e, F2, 25,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 40,
-      W6, W7, W0, W1, W2, W3, W4, W5);
-  _R( _e, _a, _b, _c, _d, F2, 26,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 40,
-      W6, W7, W0, W1, W2, W3, W4, W5);
-  _R( _d, _e, _a, _b, _c, F2, 27,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 40,
-      W6, W7, W0, W1, W2, W3, W4, W5);
-
-  _R( _c, _d, _e, _a, _b, F2, 28,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 44,
-      W5, W6, W7, W0, W1, W2, W3, W4);
-  _R( _b, _c, _d, _e, _a, F2, 29,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 44,
-      W5, W6, W7, W0, W1, W2, W3, W4);
-  _R( _a, _b, _c, _d, _e, F2, 30,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 44,
-      W5, W6, W7, W0, W1, W2, W3, W4);
-  _R( _e, _a, _b, _c, _d, F2, 31,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 44,
-      W5, W6, W7, W0, W1, W2, W3, W4);
-
-  _R( _d, _e, _a, _b, _c, F2, 32,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 48,
-      W4, W5, W6, W7, W0, W1, W2, W3);
-  _R( _c, _d, _e, _a, _b, F2, 33,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 48,
-      W4, W5, W6, W7, W0, W1, W2, W3);
-  _R( _b, _c, _d, _e, _a, F2, 34,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 48,
-      W4, W5, W6, W7, W0, W1, W2, W3);
-  _R( _a, _b, _c, _d, _e, F2, 35,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 48,
-      W4, W5, W6, W7, W0, W1, W2, W3);
-
-  _R( _e, _a, _b, _c, _d, F2, 36,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 52,
-      W3, W4, W5, W6, W7, W0, W1, W2);
-  _R( _d, _e, _a, _b, _c, F2, 37,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 52,
-      W3, W4, W5, W6, W7, W0, W1, W2);
-  _R( _c, _d, _e, _a, _b, F2, 38,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 52,
-      W3, W4, W5, W6, W7, W0, W1, W2);
-  _R( _b, _c, _d, _e, _a, F2, 39,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 52,
-      W3, W4, W5, W6, W7, W0, W1, W2);
-
-  _R( _a, _b, _c, _d, _e, F3, 40,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 56,
-      W2, W3, W4, W5, W6, W7, W0, W1);
-  _R( _e, _a, _b, _c, _d, F3, 41,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 56,
-      W2, W3, W4, W5, W6, W7, W0, W1);
-  _R( _d, _e, _a, _b, _c, F3, 42,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 56,
-      W2, W3, W4, W5, W6, W7, W0, W1);
-  _R( _c, _d, _e, _a, _b, F3, 43,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 56,
-      W2, W3, W4, W5, W6, W7, W0, W1);
-
-#undef curK
-#define curK qK4
-  _R( _b, _c, _d, _e, _a, F3, 44,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 60,
-      W1, W2, W3, W4, W5, W6, W7, W0);
-  _R( _a, _b, _c, _d, _e, F3, 45,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 60,
-      W1, W2, W3, W4, W5, W6, W7, W0);
-  _R( _e, _a, _b, _c, _d, F3, 46,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 60,
-      W1, W2, W3, W4, W5, W6, W7, W0);
-  _R( _d, _e, _a, _b, _c, F3, 47,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 60,
-      W1, W2, W3, W4, W5, W6, W7, W0);
-
-  _R( _c, _d, _e, _a, _b, F3, 48,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 64,
-      W0, W1, W2, W3, W4, W5, W6, W7);
-  _R( _b, _c, _d, _e, _a, F3, 49,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 64,
-      W0, W1, W2, W3, W4, W5, W6, W7);
-  _R( _a, _b, _c, _d, _e, F3, 50,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 64,
-      W0, W1, W2, W3, W4, W5, W6, W7);
-  _R( _e, _a, _b, _c, _d, F3, 51,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 64,
-      W0, W1, W2, W3, W4, W5, W6, W7);
-
-  _R( _d, _e, _a, _b, _c, F3, 52,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 68,
-      W7, W0, W1, W2, W3, W4, W5, W6);
-  _R( _c, _d, _e, _a, _b, F3, 53,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 68,
-      W7, W0, W1, W2, W3, W4, W5, W6);
-  _R( _b, _c, _d, _e, _a, F3, 54,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 68,
-      W7, W0, W1, W2, W3, W4, W5, W6);
-  _R( _a, _b, _c, _d, _e, F3, 55,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 68,
-      W7, W0, W1, W2, W3, W4, W5, W6);
-
-  _R( _e, _a, _b, _c, _d, F3, 56,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 72,
-      W6, W7, W0, W1, W2, W3, W4, W5);
-  _R( _d, _e, _a, _b, _c, F3, 57,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 72,
-      W6, W7, W0, W1, W2, W3, W4, W5);
-  _R( _c, _d, _e, _a, _b, F3, 58,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 72,
-      W6, W7, W0, W1, W2, W3, W4, W5);
-  _R( _b, _c, _d, _e, _a, F3, 59,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 72,
-      W6, W7, W0, W1, W2, W3, W4, W5);
-
-  subs RNBLKS, #1;
-
-  _R( _a, _b, _c, _d, _e, F4, 60,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 76,
-      W5, W6, W7, W0, W1, W2, W3, W4);
-  _R( _e, _a, _b, _c, _d, F4, 61,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 76,
-      W5, W6, W7, W0, W1, W2, W3, W4);
-  _R( _d, _e, _a, _b, _c, F4, 62,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 76,
-      W5, W6, W7, W0, W1, W2, W3, W4);
-  _R( _c, _d, _e, _a, _b, F4, 63,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 76,
-      W5, W6, W7, W0, W1, W2, W3, W4);
-
-  beq .Lend;
-
-  /* Transform 64-79 + Precalc 0-15 of next block. */
-#undef curK
-#define curK qK1
-  _R( _b, _c, _d, _e, _a, F4, 64,
-      WPRECALC_00_15_0, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _a, _b, _c, _d, _e, F4, 65,
-      WPRECALC_00_15_1, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _e, _a, _b, _c, _d, F4, 66,
-      WPRECALC_00_15_2, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _d, _e, _a, _b, _c, F4, 67,
-      WPRECALC_00_15_3, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-
-  _R( _c, _d, _e, _a, _b, F4, 68,
-      dummy,            dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _b, _c, _d, _e, _a, F4, 69,
-      dummy,            dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _a, _b, _c, _d, _e, F4, 70,
-      WPRECALC_00_15_4, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _e, _a, _b, _c, _d, F4, 71,
-      WPRECALC_00_15_5, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-
-  _R( _d, _e, _a, _b, _c, F4, 72,
-      dummy,            dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _c, _d, _e, _a, _b, F4, 73,
-      dummy,            dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _b, _c, _d, _e, _a, F4, 74,
-      WPRECALC_00_15_6, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _a, _b, _c, _d, _e, F4, 75,
-      WPRECALC_00_15_7, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-
-  _R( _e, _a, _b, _c, _d, F4, 76,
-      WPRECALC_00_15_8, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _d, _e, _a, _b, _c, F4, 77,
-      WPRECALC_00_15_9, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _c, _d, _e, _a, _b, F4, 78,
-      WPRECALC_00_15_10, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _b, _c, _d, _e, _a, F4, 79,
-      WPRECALC_00_15_11, dummy, WPRECALC_00_15_12, _, _, _, _, _, _, _, _, _ );
-
-  /* Update the chaining variables. */
-  ldm RSTATE, {RT0-RT3};
-  add _a, RT0;
-  ldr RT0, [RSTATE, #state_h4];
-  add _b, RT1;
-  add _c, RT2;
-  add _d, RT3;
-  add _e, RT0;
-  stm RSTATE, {_a-_e};
-
-  b .Loop;
-
-.Lend:
-  /* Transform 64-79 */
-  R( _b, _c, _d, _e, _a, F4, 64 );
-  R( _a, _b, _c, _d, _e, F4, 65 );
-  R( _e, _a, _b, _c, _d, F4, 66 );
-  R( _d, _e, _a, _b, _c, F4, 67 );
-  R( _c, _d, _e, _a, _b, F4, 68 );
-  R( _b, _c, _d, _e, _a, F4, 69 );
-  R( _a, _b, _c, _d, _e, F4, 70 );
-  R( _e, _a, _b, _c, _d, F4, 71 );
-  R( _d, _e, _a, _b, _c, F4, 72 );
-  R( _c, _d, _e, _a, _b, F4, 73 );
-  R( _b, _c, _d, _e, _a, F4, 74 );
-  R( _a, _b, _c, _d, _e, F4, 75 );
-  R( _e, _a, _b, _c, _d, F4, 76 );
-  R( _d, _e, _a, _b, _c, F4, 77 );
-  R( _c, _d, _e, _a, _b, F4, 78 );
-  R( _b, _c, _d, _e, _a, F4, 79 );
-
-  mov sp, ROLDSTACK;
-
-  /* Update the chaining variables. */
-  ldm RSTATE, {RT0-RT3};
-  add _a, RT0;
-  ldr RT0, [RSTATE, #state_h4];
-  add _b, RT1;
-  add _c, RT2;
-  add _d, RT3;
-  /*vpop {q4-q7};*/
-  add _e, RT0;
-  stm RSTATE, {_a-_e};
-
-  pop {r4-r12, pc};
-
-.Ldo_nothing:
-  bx lr
-ENDPROC(sha1_transform_neon)
diff --git a/arch/arm/crypto/sha1-ce-core.S b/arch/arm/crypto/sha1-ce-core.S
deleted file mode 100644
index 8a702e051738..000000000000
--- a/arch/arm/crypto/sha1-ce-core.S
+++ /dev/null
@@ -1,123 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * sha1-ce-core.S - SHA-1 secure hash using ARMv8 Crypto Extensions
- *
- * Copyright (C) 2015 Linaro Ltd.
- * Author: Ard Biesheuvel <ard.biesheuvel@linaro.org>
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-	.text
-	.arch		armv8-a
-	.fpu		crypto-neon-fp-armv8
-
-	k0		.req	q0
-	k1		.req	q1
-	k2		.req	q2
-	k3		.req	q3
-
-	ta0		.req	q4
-	ta1		.req	q5
-	tb0		.req	q5
-	tb1		.req	q4
-
-	dga		.req	q6
-	dgb		.req	q7
-	dgbs		.req	s28
-
-	dg0		.req	q12
-	dg1a0		.req	q13
-	dg1a1		.req	q14
-	dg1b0		.req	q14
-	dg1b1		.req	q13
-
-	.macro		add_only, op, ev, rc, s0, dg1
-	.ifnb		\s0
-	vadd.u32	tb\ev, q\s0, \rc
-	.endif
-	sha1h.32	dg1b\ev, dg0
-	.ifb		\dg1
-	sha1\op\().32	dg0, dg1a\ev, ta\ev
-	.else
-	sha1\op\().32	dg0, \dg1, ta\ev
-	.endif
-	.endm
-
-	.macro		add_update, op, ev, rc, s0, s1, s2, s3, dg1
-	sha1su0.32	q\s0, q\s1, q\s2
-	add_only	\op, \ev, \rc, \s1, \dg1
-	sha1su1.32	q\s0, q\s3
-	.endm
-
-	.align		6
-.Lsha1_rcon:
-	.word		0x5a827999, 0x5a827999, 0x5a827999, 0x5a827999
-	.word		0x6ed9eba1, 0x6ed9eba1, 0x6ed9eba1, 0x6ed9eba1
-	.word		0x8f1bbcdc, 0x8f1bbcdc, 0x8f1bbcdc, 0x8f1bbcdc
-	.word		0xca62c1d6, 0xca62c1d6, 0xca62c1d6, 0xca62c1d6
-
-	/*
-	 * void sha1_ce_transform(struct sha1_state *sst, u8 const *src,
-	 *			  int blocks);
-	 */
-ENTRY(sha1_ce_transform)
-	/* load round constants */
-	adr		ip, .Lsha1_rcon
-	vld1.32		{k0-k1}, [ip, :128]!
-	vld1.32		{k2-k3}, [ip, :128]
-
-	/* load state */
-	vld1.32		{dga}, [r0]
-	vldr		dgbs, [r0, #16]
-
-	/* load input */
-0:	vld1.32		{q8-q9}, [r1]!
-	vld1.32		{q10-q11}, [r1]!
-	subs		r2, r2, #1
-
-#ifndef CONFIG_CPU_BIG_ENDIAN
-	vrev32.8	q8, q8
-	vrev32.8	q9, q9
-	vrev32.8	q10, q10
-	vrev32.8	q11, q11
-#endif
-
-	vadd.u32	ta0, q8, k0
-	vmov		dg0, dga
-
-	add_update	c, 0, k0,  8,  9, 10, 11, dgb
-	add_update	c, 1, k0,  9, 10, 11,  8
-	add_update	c, 0, k0, 10, 11,  8,  9
-	add_update	c, 1, k0, 11,  8,  9, 10
-	add_update	c, 0, k1,  8,  9, 10, 11
-
-	add_update	p, 1, k1,  9, 10, 11,  8
-	add_update	p, 0, k1, 10, 11,  8,  9
-	add_update	p, 1, k1, 11,  8,  9, 10
-	add_update	p, 0, k1,  8,  9, 10, 11
-	add_update	p, 1, k2,  9, 10, 11,  8
-
-	add_update	m, 0, k2, 10, 11,  8,  9
-	add_update	m, 1, k2, 11,  8,  9, 10
-	add_update	m, 0, k2,  8,  9, 10, 11
-	add_update	m, 1, k2,  9, 10, 11,  8
-	add_update	m, 0, k3, 10, 11,  8,  9
-
-	add_update	p, 1, k3, 11,  8,  9, 10
-	add_only	p, 0, k3,  9
-	add_only	p, 1, k3, 10
-	add_only	p, 0, k3, 11
-	add_only	p, 1
-
-	/* update state */
-	vadd.u32	dga, dga, dg0
-	vadd.u32	dgb, dgb, dg1a0
-	bne		0b
-
-	/* store new state */
-	vst1.32		{dga}, [r0]
-	vstr		dgbs, [r0, #16]
-	bx		lr
-ENDPROC(sha1_ce_transform)
diff --git a/arch/arm/crypto/sha1-ce-glue.c b/arch/arm/crypto/sha1-ce-glue.c
deleted file mode 100644
index de9100c67b37..000000000000
--- a/arch/arm/crypto/sha1-ce-glue.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * sha1-ce-glue.c - SHA-1 secure hash using ARMv8 Crypto Extensions
- *
- * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <crypto/sha1.h>
-#include <crypto/sha1_base.h>
-#include <linux/cpufeature.h>
-#include <linux/crypto.h>
-#include <linux/module.h>
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-
-#include "sha1.h"
-
-MODULE_DESCRIPTION("SHA1 secure hash using ARMv8 Crypto Extensions");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-
-asmlinkage void sha1_ce_transform(struct sha1_state *sst, u8 const *src,
-				  int blocks);
-
-static int sha1_ce_update(struct shash_desc *desc, const u8 *data,
-			  unsigned int len)
-{
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable() ||
-	    (sctx->count % SHA1_BLOCK_SIZE) + len < SHA1_BLOCK_SIZE)
-		return sha1_update_arm(desc, data, len);
-
-	kernel_neon_begin();
-	sha1_base_do_update(desc, data, len, sha1_ce_transform);
-	kernel_neon_end();
-
-	return 0;
-}
-
-static int sha1_ce_finup(struct shash_desc *desc, const u8 *data,
-			 unsigned int len, u8 *out)
-{
-	if (!crypto_simd_usable())
-		return sha1_finup_arm(desc, data, len, out);
-
-	kernel_neon_begin();
-	if (len)
-		sha1_base_do_update(desc, data, len, sha1_ce_transform);
-	sha1_base_do_finalize(desc, sha1_ce_transform);
-	kernel_neon_end();
-
-	return sha1_base_finish(desc, out);
-}
-
-static int sha1_ce_final(struct shash_desc *desc, u8 *out)
-{
-	return sha1_ce_finup(desc, NULL, 0, out);
-}
-
-static struct shash_alg alg = {
-	.init			= sha1_base_init,
-	.update			= sha1_ce_update,
-	.final			= sha1_ce_final,
-	.finup			= sha1_ce_finup,
-	.descsize		= sizeof(struct sha1_state),
-	.digestsize		= SHA1_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha1",
-		.cra_driver_name	= "sha1-ce",
-		.cra_priority		= 200,
-		.cra_blocksize		= SHA1_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-};
-
-static int __init sha1_ce_mod_init(void)
-{
-	return crypto_register_shash(&alg);
-}
-
-static void __exit sha1_ce_mod_fini(void)
-{
-	crypto_unregister_shash(&alg);
-}
-
-module_cpu_feature_match(SHA1, sha1_ce_mod_init);
-module_exit(sha1_ce_mod_fini);
diff --git a/arch/arm/crypto/sha1.h b/arch/arm/crypto/sha1.h
deleted file mode 100644
index b1b7e21da2c3..000000000000
--- a/arch/arm/crypto/sha1.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef ASM_ARM_CRYPTO_SHA1_H
-#define ASM_ARM_CRYPTO_SHA1_H
-
-#include <linux/crypto.h>
-#include <crypto/sha1.h>
-
-extern int sha1_update_arm(struct shash_desc *desc, const u8 *data,
-			   unsigned int len);
-
-extern int sha1_finup_arm(struct shash_desc *desc, const u8 *data,
-			   unsigned int len, u8 *out);
-
-#endif
diff --git a/arch/arm/crypto/sha1_glue.c b/arch/arm/crypto/sha1_glue.c
deleted file mode 100644
index 6c2b849e459d..000000000000
--- a/arch/arm/crypto/sha1_glue.c
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Cryptographic API.
- * Glue code for the SHA1 Secure Hash Algorithm assembler implementation
- *
- * This file is based on sha1_generic.c and sha1_ssse3_glue.c
- *
- * Copyright (c) Alan Smithee.
- * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk>
- * Copyright (c) Jean-Francois Dive <jef@linuxbe.org>
- * Copyright (c) Mathias Krause <minipli@googlemail.com>
- */
-
-#include <crypto/internal/hash.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <crypto/sha1.h>
-#include <crypto/sha1_base.h>
-#include <asm/byteorder.h>
-
-#include "sha1.h"
-
-asmlinkage void sha1_block_data_order(u32 *digest,
-		const unsigned char *data, unsigned int rounds);
-
-int sha1_update_arm(struct shash_desc *desc, const u8 *data,
-		    unsigned int len)
-{
-	/* make sure casting to sha1_block_fn() is safe */
-	BUILD_BUG_ON(offsetof(struct sha1_state, state) != 0);
-
-	return sha1_base_do_update(desc, data, len,
-				   (sha1_block_fn *)sha1_block_data_order);
-}
-EXPORT_SYMBOL_GPL(sha1_update_arm);
-
-static int sha1_final(struct shash_desc *desc, u8 *out)
-{
-	sha1_base_do_finalize(desc, (sha1_block_fn *)sha1_block_data_order);
-	return sha1_base_finish(desc, out);
-}
-
-int sha1_finup_arm(struct shash_desc *desc, const u8 *data,
-		   unsigned int len, u8 *out)
-{
-	sha1_base_do_update(desc, data, len,
-			    (sha1_block_fn *)sha1_block_data_order);
-	return sha1_final(desc, out);
-}
-EXPORT_SYMBOL_GPL(sha1_finup_arm);
-
-static struct shash_alg alg = {
-	.digestsize	=	SHA1_DIGEST_SIZE,
-	.init		=	sha1_base_init,
-	.update		=	sha1_update_arm,
-	.final		=	sha1_final,
-	.finup		=	sha1_finup_arm,
-	.descsize	=	sizeof(struct sha1_state),
-	.base		=	{
-		.cra_name	=	"sha1",
-		.cra_driver_name=	"sha1-asm",
-		.cra_priority	=	150,
-		.cra_blocksize	=	SHA1_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-};
-
-
-static int __init sha1_mod_init(void)
-{
-	return crypto_register_shash(&alg);
-}
-
-
-static void __exit sha1_mod_fini(void)
-{
-	crypto_unregister_shash(&alg);
-}
-
-
-module_init(sha1_mod_init);
-module_exit(sha1_mod_fini);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm (ARM)");
-MODULE_ALIAS_CRYPTO("sha1");
-MODULE_AUTHOR("David McCullough <ucdevel@gmail.com>");
diff --git a/arch/arm/crypto/sha1_neon_glue.c b/arch/arm/crypto/sha1_neon_glue.c
deleted file mode 100644
index cfe36ae0f3f5..000000000000
--- a/arch/arm/crypto/sha1_neon_glue.c
+++ /dev/null
@@ -1,104 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Glue code for the SHA1 Secure Hash Algorithm assembler implementation using
- * ARM NEON instructions.
- *
- * Copyright © 2014 Jussi Kivilinna <jussi.kivilinna@iki.fi>
- *
- * This file is based on sha1_generic.c and sha1_ssse3_glue.c:
- *  Copyright (c) Alan Smithee.
- *  Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk>
- *  Copyright (c) Jean-Francois Dive <jef@linuxbe.org>
- *  Copyright (c) Mathias Krause <minipli@googlemail.com>
- *  Copyright (c) Chandramouli Narayanan <mouli@linux.intel.com>
- */
-
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/types.h>
-#include <crypto/sha1.h>
-#include <crypto/sha1_base.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-
-#include "sha1.h"
-
-asmlinkage void sha1_transform_neon(void *state_h, const char *data,
-				    unsigned int rounds);
-
-static int sha1_neon_update(struct shash_desc *desc, const u8 *data,
-			  unsigned int len)
-{
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable() ||
-	    (sctx->count % SHA1_BLOCK_SIZE) + len < SHA1_BLOCK_SIZE)
-		return sha1_update_arm(desc, data, len);
-
-	kernel_neon_begin();
-	sha1_base_do_update(desc, data, len,
-			    (sha1_block_fn *)sha1_transform_neon);
-	kernel_neon_end();
-
-	return 0;
-}
-
-static int sha1_neon_finup(struct shash_desc *desc, const u8 *data,
-			   unsigned int len, u8 *out)
-{
-	if (!crypto_simd_usable())
-		return sha1_finup_arm(desc, data, len, out);
-
-	kernel_neon_begin();
-	if (len)
-		sha1_base_do_update(desc, data, len,
-				    (sha1_block_fn *)sha1_transform_neon);
-	sha1_base_do_finalize(desc, (sha1_block_fn *)sha1_transform_neon);
-	kernel_neon_end();
-
-	return sha1_base_finish(desc, out);
-}
-
-static int sha1_neon_final(struct shash_desc *desc, u8 *out)
-{
-	return sha1_neon_finup(desc, NULL, 0, out);
-}
-
-static struct shash_alg alg = {
-	.digestsize	=	SHA1_DIGEST_SIZE,
-	.init		=	sha1_base_init,
-	.update		=	sha1_neon_update,
-	.final		=	sha1_neon_final,
-	.finup		=	sha1_neon_finup,
-	.descsize	=	sizeof(struct sha1_state),
-	.base		=	{
-		.cra_name		= "sha1",
-		.cra_driver_name	= "sha1-neon",
-		.cra_priority		= 250,
-		.cra_blocksize		= SHA1_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-};
-
-static int __init sha1_neon_mod_init(void)
-{
-	if (!cpu_has_neon())
-		return -ENODEV;
-
-	return crypto_register_shash(&alg);
-}
-
-static void __exit sha1_neon_mod_fini(void)
-{
-	crypto_unregister_shash(&alg);
-}
-
-module_init(sha1_neon_mod_init);
-module_exit(sha1_neon_mod_fini);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm, NEON accelerated");
-MODULE_ALIAS_CRYPTO("sha1");
diff --git a/arch/arm/crypto/sha2-ce-core.S b/arch/arm/crypto/sha2-ce-core.S
deleted file mode 100644
index b6369d2440a1..000000000000
--- a/arch/arm/crypto/sha2-ce-core.S
+++ /dev/null
@@ -1,123 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * sha2-ce-core.S - SHA-224/256 secure hash using ARMv8 Crypto Extensions
- *
- * Copyright (C) 2015 Linaro Ltd.
- * Author: Ard Biesheuvel <ard.biesheuvel@linaro.org>
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-	.text
-	.arch		armv8-a
-	.fpu		crypto-neon-fp-armv8
-
-	k0		.req	q7
-	k1		.req	q8
-	rk		.req	r3
-
-	ta0		.req	q9
-	ta1		.req	q10
-	tb0		.req	q10
-	tb1		.req	q9
-
-	dga		.req	q11
-	dgb		.req	q12
-
-	dg0		.req	q13
-	dg1		.req	q14
-	dg2		.req	q15
-
-	.macro		add_only, ev, s0
-	vmov		dg2, dg0
-	.ifnb		\s0
-	vld1.32		{k\ev}, [rk, :128]!
-	.endif
-	sha256h.32	dg0, dg1, tb\ev
-	sha256h2.32	dg1, dg2, tb\ev
-	.ifnb		\s0
-	vadd.u32	ta\ev, q\s0, k\ev
-	.endif
-	.endm
-
-	.macro		add_update, ev, s0, s1, s2, s3
-	sha256su0.32	q\s0, q\s1
-	add_only	\ev, \s1
-	sha256su1.32	q\s0, q\s2, q\s3
-	.endm
-
-	.align		6
-.Lsha256_rcon:
-	.word		0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5
-	.word		0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5
-	.word		0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3
-	.word		0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174
-	.word		0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc
-	.word		0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da
-	.word		0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7
-	.word		0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967
-	.word		0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13
-	.word		0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85
-	.word		0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3
-	.word		0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070
-	.word		0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5
-	.word		0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3
-	.word		0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208
-	.word		0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2
-
-	/*
-	 * void sha2_ce_transform(struct sha256_state *sst, u8 const *src,
-				  int blocks);
-	 */
-ENTRY(sha2_ce_transform)
-	/* load state */
-	vld1.32		{dga-dgb}, [r0]
-
-	/* load input */
-0:	vld1.32		{q0-q1}, [r1]!
-	vld1.32		{q2-q3}, [r1]!
-	subs		r2, r2, #1
-
-#ifndef CONFIG_CPU_BIG_ENDIAN
-	vrev32.8	q0, q0
-	vrev32.8	q1, q1
-	vrev32.8	q2, q2
-	vrev32.8	q3, q3
-#endif
-
-	/* load first round constant */
-	adr		rk, .Lsha256_rcon
-	vld1.32		{k0}, [rk, :128]!
-
-	vadd.u32	ta0, q0, k0
-	vmov		dg0, dga
-	vmov		dg1, dgb
-
-	add_update	1, 0, 1, 2, 3
-	add_update	0, 1, 2, 3, 0
-	add_update	1, 2, 3, 0, 1
-	add_update	0, 3, 0, 1, 2
-	add_update	1, 0, 1, 2, 3
-	add_update	0, 1, 2, 3, 0
-	add_update	1, 2, 3, 0, 1
-	add_update	0, 3, 0, 1, 2
-	add_update	1, 0, 1, 2, 3
-	add_update	0, 1, 2, 3, 0
-	add_update	1, 2, 3, 0, 1
-	add_update	0, 3, 0, 1, 2
-
-	add_only	1, 1
-	add_only	0, 2
-	add_only	1, 3
-	add_only	0
-
-	/* update state */
-	vadd.u32	dga, dga, dg0
-	vadd.u32	dgb, dgb, dg1
-	bne		0b
-
-	/* store new state */
-	vst1.32		{dga-dgb}, [r0]
-	bx		lr
-ENDPROC(sha2_ce_transform)
diff --git a/arch/arm/crypto/sha2-ce-glue.c b/arch/arm/crypto/sha2-ce-glue.c
deleted file mode 100644
index c62ce89dd3e0..000000000000
--- a/arch/arm/crypto/sha2-ce-glue.c
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * sha2-ce-glue.c - SHA-224/SHA-256 using ARMv8 Crypto Extensions
- *
- * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <crypto/sha2.h>
-#include <crypto/sha256_base.h>
-#include <linux/cpufeature.h>
-#include <linux/crypto.h>
-#include <linux/module.h>
-
-#include <asm/hwcap.h>
-#include <asm/simd.h>
-#include <asm/neon.h>
-#include <asm/unaligned.h>
-
-#include "sha256_glue.h"
-
-MODULE_DESCRIPTION("SHA-224/SHA-256 secure hash using ARMv8 Crypto Extensions");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-
-asmlinkage void sha2_ce_transform(struct sha256_state *sst, u8 const *src,
-				  int blocks);
-
-static int sha2_ce_update(struct shash_desc *desc, const u8 *data,
-			  unsigned int len)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable() ||
-	    (sctx->count % SHA256_BLOCK_SIZE) + len < SHA256_BLOCK_SIZE)
-		return crypto_sha256_arm_update(desc, data, len);
-
-	kernel_neon_begin();
-	sha256_base_do_update(desc, data, len,
-			      (sha256_block_fn *)sha2_ce_transform);
-	kernel_neon_end();
-
-	return 0;
-}
-
-static int sha2_ce_finup(struct shash_desc *desc, const u8 *data,
-			 unsigned int len, u8 *out)
-{
-	if (!crypto_simd_usable())
-		return crypto_sha256_arm_finup(desc, data, len, out);
-
-	kernel_neon_begin();
-	if (len)
-		sha256_base_do_update(desc, data, len,
-				      (sha256_block_fn *)sha2_ce_transform);
-	sha256_base_do_finalize(desc, (sha256_block_fn *)sha2_ce_transform);
-	kernel_neon_end();
-
-	return sha256_base_finish(desc, out);
-}
-
-static int sha2_ce_final(struct shash_desc *desc, u8 *out)
-{
-	return sha2_ce_finup(desc, NULL, 0, out);
-}
-
-static struct shash_alg algs[] = { {
-	.init			= sha224_base_init,
-	.update			= sha2_ce_update,
-	.final			= sha2_ce_final,
-	.finup			= sha2_ce_finup,
-	.descsize		= sizeof(struct sha256_state),
-	.digestsize		= SHA224_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha224",
-		.cra_driver_name	= "sha224-ce",
-		.cra_priority		= 300,
-		.cra_blocksize		= SHA256_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-}, {
-	.init			= sha256_base_init,
-	.update			= sha2_ce_update,
-	.final			= sha2_ce_final,
-	.finup			= sha2_ce_finup,
-	.descsize		= sizeof(struct sha256_state),
-	.digestsize		= SHA256_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha256",
-		.cra_driver_name	= "sha256-ce",
-		.cra_priority		= 300,
-		.cra_blocksize		= SHA256_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-} };
-
-static int __init sha2_ce_mod_init(void)
-{
-	return crypto_register_shashes(algs, ARRAY_SIZE(algs));
-}
-
-static void __exit sha2_ce_mod_fini(void)
-{
-	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-}
-
-module_cpu_feature_match(SHA2, sha2_ce_mod_init);
-module_exit(sha2_ce_mod_fini);
diff --git a/arch/arm/crypto/sha256-armv4.pl b/arch/arm/crypto/sha256-armv4.pl
deleted file mode 100644
index f3a2b54efd4e..000000000000
--- a/arch/arm/crypto/sha256-armv4.pl
+++ /dev/null
@@ -1,724 +0,0 @@
-#!/usr/bin/env perl
-# SPDX-License-Identifier: GPL-2.0
-
-# This code is taken from the OpenSSL project but the author (Andy Polyakov)
-# has relicensed it under the GPLv2. Therefore this program is free software;
-# you can redistribute it and/or modify it under the terms of the GNU General
-# Public License version 2 as published by the Free Software Foundation.
-#
-# The original headers, including the original license headers, are
-# included below for completeness.
-
-# ====================================================================
-# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see https://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-
-# SHA256 block procedure for ARMv4. May 2007.
-
-# Performance is ~2x better than gcc 3.4 generated code and in "abso-
-# lute" terms is ~2250 cycles per 64-byte block or ~35 cycles per
-# byte [on single-issue Xscale PXA250 core].
-
-# July 2010.
-#
-# Rescheduling for dual-issue pipeline resulted in 22% improvement on
-# Cortex A8 core and ~20 cycles per processed byte.
-
-# February 2011.
-#
-# Profiler-assisted and platform-specific optimization resulted in 16%
-# improvement on Cortex A8 core and ~15.4 cycles per processed byte.
-
-# September 2013.
-#
-# Add NEON implementation. On Cortex A8 it was measured to process one
-# byte in 12.5 cycles or 23% faster than integer-only code. Snapdragon
-# S4 does it in 12.5 cycles too, but it's 50% faster than integer-only
-# code (meaning that latter performs sub-optimally, nothing was done
-# about it).
-
-# May 2014.
-#
-# Add ARMv8 code path performing at 2.0 cpb on Apple A7.
-
-while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
-
-$ctx="r0";	$t0="r0";
-$inp="r1";	$t4="r1";
-$len="r2";	$t1="r2";
-$T1="r3";	$t3="r3";
-$A="r4";
-$B="r5";
-$C="r6";
-$D="r7";
-$E="r8";
-$F="r9";
-$G="r10";
-$H="r11";
-@V=($A,$B,$C,$D,$E,$F,$G,$H);
-$t2="r12";
-$Ktbl="r14";
-
-@Sigma0=( 2,13,22);
-@Sigma1=( 6,11,25);
-@sigma0=( 7,18, 3);
-@sigma1=(17,19,10);
-
-sub BODY_00_15 {
-my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_;
-
-$code.=<<___ if ($i<16);
-#if __ARM_ARCH__>=7
-	@ ldr	$t1,[$inp],#4			@ $i
-# if $i==15
-	str	$inp,[sp,#17*4]			@ make room for $t4
-# endif
-	eor	$t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]`
-	add	$a,$a,$t2			@ h+=Maj(a,b,c) from the past
-	eor	$t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]`	@ Sigma1(e)
-# ifndef __ARMEB__
-	rev	$t1,$t1
-# endif
-#else
-	@ ldrb	$t1,[$inp,#3]			@ $i
-	add	$a,$a,$t2			@ h+=Maj(a,b,c) from the past
-	ldrb	$t2,[$inp,#2]
-	ldrb	$t0,[$inp,#1]
-	orr	$t1,$t1,$t2,lsl#8
-	ldrb	$t2,[$inp],#4
-	orr	$t1,$t1,$t0,lsl#16
-# if $i==15
-	str	$inp,[sp,#17*4]			@ make room for $t4
-# endif
-	eor	$t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]`
-	orr	$t1,$t1,$t2,lsl#24
-	eor	$t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]`	@ Sigma1(e)
-#endif
-___
-$code.=<<___;
-	ldr	$t2,[$Ktbl],#4			@ *K256++
-	add	$h,$h,$t1			@ h+=X[i]
-	str	$t1,[sp,#`$i%16`*4]
-	eor	$t1,$f,$g
-	add	$h,$h,$t0,ror#$Sigma1[0]	@ h+=Sigma1(e)
-	and	$t1,$t1,$e
-	add	$h,$h,$t2			@ h+=K256[i]
-	eor	$t1,$t1,$g			@ Ch(e,f,g)
-	eor	$t0,$a,$a,ror#`$Sigma0[1]-$Sigma0[0]`
-	add	$h,$h,$t1			@ h+=Ch(e,f,g)
-#if $i==31
-	and	$t2,$t2,#0xff
-	cmp	$t2,#0xf2			@ done?
-#endif
-#if $i<15
-# if __ARM_ARCH__>=7
-	ldr	$t1,[$inp],#4			@ prefetch
-# else
-	ldrb	$t1,[$inp,#3]
-# endif
-	eor	$t2,$a,$b			@ a^b, b^c in next round
-#else
-	ldr	$t1,[sp,#`($i+2)%16`*4]		@ from future BODY_16_xx
-	eor	$t2,$a,$b			@ a^b, b^c in next round
-	ldr	$t4,[sp,#`($i+15)%16`*4]	@ from future BODY_16_xx
-#endif
-	eor	$t0,$t0,$a,ror#`$Sigma0[2]-$Sigma0[0]`	@ Sigma0(a)
-	and	$t3,$t3,$t2			@ (b^c)&=(a^b)
-	add	$d,$d,$h			@ d+=h
-	eor	$t3,$t3,$b			@ Maj(a,b,c)
-	add	$h,$h,$t0,ror#$Sigma0[0]	@ h+=Sigma0(a)
-	@ add	$h,$h,$t3			@ h+=Maj(a,b,c)
-___
-	($t2,$t3)=($t3,$t2);
-}
-
-sub BODY_16_XX {
-my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_;
-
-$code.=<<___;
-	@ ldr	$t1,[sp,#`($i+1)%16`*4]		@ $i
-	@ ldr	$t4,[sp,#`($i+14)%16`*4]
-	mov	$t0,$t1,ror#$sigma0[0]
-	add	$a,$a,$t2			@ h+=Maj(a,b,c) from the past
-	mov	$t2,$t4,ror#$sigma1[0]
-	eor	$t0,$t0,$t1,ror#$sigma0[1]
-	eor	$t2,$t2,$t4,ror#$sigma1[1]
-	eor	$t0,$t0,$t1,lsr#$sigma0[2]	@ sigma0(X[i+1])
-	ldr	$t1,[sp,#`($i+0)%16`*4]
-	eor	$t2,$t2,$t4,lsr#$sigma1[2]	@ sigma1(X[i+14])
-	ldr	$t4,[sp,#`($i+9)%16`*4]
-
-	add	$t2,$t2,$t0
-	eor	$t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]`	@ from BODY_00_15
-	add	$t1,$t1,$t2
-	eor	$t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]`	@ Sigma1(e)
-	add	$t1,$t1,$t4			@ X[i]
-___
-	&BODY_00_15(@_);
-}
-
-$code=<<___;
-#ifndef __KERNEL__
-# include "arm_arch.h"
-#else
-# define __ARM_ARCH__ __LINUX_ARM_ARCH__
-# define __ARM_MAX_ARCH__ 7
-#endif
-
-.text
-#if __ARM_ARCH__<7
-.code	32
-#else
-.syntax unified
-# ifdef __thumb2__
-.thumb
-# else
-.code   32
-# endif
-#endif
-
-.type	K256,%object
-.align	5
-K256:
-.word	0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5
-.word	0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5
-.word	0xd807aa98,0x12835b01,0x243185be,0x550c7dc3
-.word	0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174
-.word	0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc
-.word	0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da
-.word	0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7
-.word	0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967
-.word	0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13
-.word	0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85
-.word	0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3
-.word	0xd192e819,0xd6990624,0xf40e3585,0x106aa070
-.word	0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5
-.word	0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3
-.word	0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208
-.word	0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
-.size	K256,.-K256
-.word	0				@ terminator
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-.LOPENSSL_armcap:
-.word	OPENSSL_armcap_P-sha256_block_data_order
-#endif
-.align	5
-
-.global	sha256_block_data_order
-.type	sha256_block_data_order,%function
-sha256_block_data_order:
-.Lsha256_block_data_order:
-#if __ARM_ARCH__<7
-	sub	r3,pc,#8		@ sha256_block_data_order
-#else
-	adr	r3,.Lsha256_block_data_order
-#endif
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-	ldr	r12,.LOPENSSL_armcap
-	ldr	r12,[r3,r12]		@ OPENSSL_armcap_P
-	tst	r12,#ARMV8_SHA256
-	bne	.LARMv8
-	tst	r12,#ARMV7_NEON
-	bne	.LNEON
-#endif
-	add	$len,$inp,$len,lsl#6	@ len to point at the end of inp
-	stmdb	sp!,{$ctx,$inp,$len,r4-r11,lr}
-	ldmia	$ctx,{$A,$B,$C,$D,$E,$F,$G,$H}
-	sub	$Ktbl,r3,#256+32	@ K256
-	sub	sp,sp,#16*4		@ alloca(X[16])
-.Loop:
-# if __ARM_ARCH__>=7
-	ldr	$t1,[$inp],#4
-# else
-	ldrb	$t1,[$inp,#3]
-# endif
-	eor	$t3,$B,$C		@ magic
-	eor	$t2,$t2,$t2
-___
-for($i=0;$i<16;$i++)	{ &BODY_00_15($i,@V); unshift(@V,pop(@V)); }
-$code.=".Lrounds_16_xx:\n";
-for (;$i<32;$i++)	{ &BODY_16_XX($i,@V); unshift(@V,pop(@V)); }
-$code.=<<___;
-#if __ARM_ARCH__>=7
-	ite	eq			@ Thumb2 thing, sanity check in ARM
-#endif
-	ldreq	$t3,[sp,#16*4]		@ pull ctx
-	bne	.Lrounds_16_xx
-
-	add	$A,$A,$t2		@ h+=Maj(a,b,c) from the past
-	ldr	$t0,[$t3,#0]
-	ldr	$t1,[$t3,#4]
-	ldr	$t2,[$t3,#8]
-	add	$A,$A,$t0
-	ldr	$t0,[$t3,#12]
-	add	$B,$B,$t1
-	ldr	$t1,[$t3,#16]
-	add	$C,$C,$t2
-	ldr	$t2,[$t3,#20]
-	add	$D,$D,$t0
-	ldr	$t0,[$t3,#24]
-	add	$E,$E,$t1
-	ldr	$t1,[$t3,#28]
-	add	$F,$F,$t2
-	ldr	$inp,[sp,#17*4]		@ pull inp
-	ldr	$t2,[sp,#18*4]		@ pull inp+len
-	add	$G,$G,$t0
-	add	$H,$H,$t1
-	stmia	$t3,{$A,$B,$C,$D,$E,$F,$G,$H}
-	cmp	$inp,$t2
-	sub	$Ktbl,$Ktbl,#256	@ rewind Ktbl
-	bne	.Loop
-
-	add	sp,sp,#`16+3`*4	@ destroy frame
-#if __ARM_ARCH__>=5
-	ldmia	sp!,{r4-r11,pc}
-#else
-	ldmia	sp!,{r4-r11,lr}
-	tst	lr,#1
-	moveq	pc,lr			@ be binary compatible with V4, yet
-	bx	lr			@ interoperable with Thumb ISA:-)
-#endif
-.size	sha256_block_data_order,.-sha256_block_data_order
-___
-######################################################################
-# NEON stuff
-#
-{{{
-my @X=map("q$_",(0..3));
-my ($T0,$T1,$T2,$T3,$T4,$T5)=("q8","q9","q10","q11","d24","d25");
-my $Xfer=$t4;
-my $j=0;
-
-sub Dlo()   { shift=~m|q([1]?[0-9])|?"d".($1*2):"";     }
-sub Dhi()   { shift=~m|q([1]?[0-9])|?"d".($1*2+1):"";   }
-
-sub AUTOLOAD()          # thunk [simplified] x86-style perlasm
-{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./;
-  my $arg = pop;
-    $arg = "#$arg" if ($arg*1 eq $arg);
-    $code .= "\t$opcode\t".join(',',@_,$arg)."\n";
-}
-
-sub Xupdate()
-{ use integer;
-  my $body = shift;
-  my @insns = (&$body,&$body,&$body,&$body);
-  my ($a,$b,$c,$d,$e,$f,$g,$h);
-
-	&vext_8		($T0,@X[0],@X[1],4);	# X[1..4]
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vext_8		($T1,@X[2],@X[3],4);	# X[9..12]
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vshr_u32	($T2,$T0,$sigma0[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vadd_i32	(@X[0],@X[0],$T1);	# X[0..3] += X[9..12]
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vshr_u32	($T1,$T0,$sigma0[2]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vsli_32	($T2,$T0,32-$sigma0[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vshr_u32	($T3,$T0,$sigma0[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&veor		($T1,$T1,$T2);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vsli_32	($T3,$T0,32-$sigma0[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vshr_u32	($T4,&Dhi(@X[3]),$sigma1[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&veor		($T1,$T1,$T3);		# sigma0(X[1..4])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vsli_32	($T4,&Dhi(@X[3]),32-$sigma1[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vshr_u32	($T5,&Dhi(@X[3]),$sigma1[2]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vadd_i32	(@X[0],@X[0],$T1);	# X[0..3] += sigma0(X[1..4])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &veor		($T5,$T5,$T4);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vshr_u32	($T4,&Dhi(@X[3]),$sigma1[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vsli_32	($T4,&Dhi(@X[3]),32-$sigma1[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &veor		($T5,$T5,$T4);		# sigma1(X[14..15])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vadd_i32	(&Dlo(@X[0]),&Dlo(@X[0]),$T5);# X[0..1] += sigma1(X[14..15])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vshr_u32	($T4,&Dlo(@X[0]),$sigma1[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vsli_32	($T4,&Dlo(@X[0]),32-$sigma1[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vshr_u32	($T5,&Dlo(@X[0]),$sigma1[2]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &veor		($T5,$T5,$T4);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vshr_u32	($T4,&Dlo(@X[0]),$sigma1[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vld1_32	("{$T0}","[$Ktbl,:128]!");
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vsli_32	($T4,&Dlo(@X[0]),32-$sigma1[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &veor		($T5,$T5,$T4);		# sigma1(X[16..17])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vadd_i32	(&Dhi(@X[0]),&Dhi(@X[0]),$T5);# X[2..3] += sigma1(X[16..17])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vadd_i32	($T0,$T0,@X[0]);
-	 while($#insns>=2) { eval(shift(@insns)); }
-	&vst1_32	("{$T0}","[$Xfer,:128]!");
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-
-	push(@X,shift(@X));		# "rotate" X[]
-}
-
-sub Xpreload()
-{ use integer;
-  my $body = shift;
-  my @insns = (&$body,&$body,&$body,&$body);
-  my ($a,$b,$c,$d,$e,$f,$g,$h);
-
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vld1_32	("{$T0}","[$Ktbl,:128]!");
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vrev32_8	(@X[0],@X[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vadd_i32	($T0,$T0,@X[0]);
-	 foreach (@insns) { eval; }	# remaining instructions
-	&vst1_32	("{$T0}","[$Xfer,:128]!");
-
-	push(@X,shift(@X));		# "rotate" X[]
-}
-
-sub body_00_15 () {
-	(
-	'($a,$b,$c,$d,$e,$f,$g,$h)=@V;'.
-	'&add	($h,$h,$t1)',			# h+=X[i]+K[i]
-	'&eor	($t1,$f,$g)',
-	'&eor	($t0,$e,$e,"ror#".($Sigma1[1]-$Sigma1[0]))',
-	'&add	($a,$a,$t2)',			# h+=Maj(a,b,c) from the past
-	'&and	($t1,$t1,$e)',
-	'&eor	($t2,$t0,$e,"ror#".($Sigma1[2]-$Sigma1[0]))',	# Sigma1(e)
-	'&eor	($t0,$a,$a,"ror#".($Sigma0[1]-$Sigma0[0]))',
-	'&eor	($t1,$t1,$g)',			# Ch(e,f,g)
-	'&add	($h,$h,$t2,"ror#$Sigma1[0]")',	# h+=Sigma1(e)
-	'&eor	($t2,$a,$b)',			# a^b, b^c in next round
-	'&eor	($t0,$t0,$a,"ror#".($Sigma0[2]-$Sigma0[0]))',	# Sigma0(a)
-	'&add	($h,$h,$t1)',			# h+=Ch(e,f,g)
-	'&ldr	($t1,sprintf "[sp,#%d]",4*(($j+1)&15))	if (($j&15)!=15);'.
-	'&ldr	($t1,"[$Ktbl]")				if ($j==15);'.
-	'&ldr	($t1,"[sp,#64]")			if ($j==31)',
-	'&and	($t3,$t3,$t2)',			# (b^c)&=(a^b)
-	'&add	($d,$d,$h)',			# d+=h
-	'&add	($h,$h,$t0,"ror#$Sigma0[0]");'.	# h+=Sigma0(a)
-	'&eor	($t3,$t3,$b)',			# Maj(a,b,c)
-	'$j++;	unshift(@V,pop(@V)); ($t2,$t3)=($t3,$t2);'
-	)
-}
-
-$code.=<<___;
-#if __ARM_MAX_ARCH__>=7
-.arch	armv7-a
-.fpu	neon
-
-.global	sha256_block_data_order_neon
-.type	sha256_block_data_order_neon,%function
-.align	4
-sha256_block_data_order_neon:
-.LNEON:
-	stmdb	sp!,{r4-r12,lr}
-
-	sub	$H,sp,#16*4+16
-	adr	$Ktbl,.Lsha256_block_data_order
-	sub	$Ktbl,$Ktbl,#.Lsha256_block_data_order-K256
-	bic	$H,$H,#15		@ align for 128-bit stores
-	mov	$t2,sp
-	mov	sp,$H			@ alloca
-	add	$len,$inp,$len,lsl#6	@ len to point at the end of inp
-
-	vld1.8		{@X[0]},[$inp]!
-	vld1.8		{@X[1]},[$inp]!
-	vld1.8		{@X[2]},[$inp]!
-	vld1.8		{@X[3]},[$inp]!
-	vld1.32		{$T0},[$Ktbl,:128]!
-	vld1.32		{$T1},[$Ktbl,:128]!
-	vld1.32		{$T2},[$Ktbl,:128]!
-	vld1.32		{$T3},[$Ktbl,:128]!
-	vrev32.8	@X[0],@X[0]		@ yes, even on
-	str		$ctx,[sp,#64]
-	vrev32.8	@X[1],@X[1]		@ big-endian
-	str		$inp,[sp,#68]
-	mov		$Xfer,sp
-	vrev32.8	@X[2],@X[2]
-	str		$len,[sp,#72]
-	vrev32.8	@X[3],@X[3]
-	str		$t2,[sp,#76]		@ save original sp
-	vadd.i32	$T0,$T0,@X[0]
-	vadd.i32	$T1,$T1,@X[1]
-	vst1.32		{$T0},[$Xfer,:128]!
-	vadd.i32	$T2,$T2,@X[2]
-	vst1.32		{$T1},[$Xfer,:128]!
-	vadd.i32	$T3,$T3,@X[3]
-	vst1.32		{$T2},[$Xfer,:128]!
-	vst1.32		{$T3},[$Xfer,:128]!
-
-	ldmia		$ctx,{$A-$H}
-	sub		$Xfer,$Xfer,#64
-	ldr		$t1,[sp,#0]
-	eor		$t2,$t2,$t2
-	eor		$t3,$B,$C
-	b		.L_00_48
-
-.align	4
-.L_00_48:
-___
-	&Xupdate(\&body_00_15);
-	&Xupdate(\&body_00_15);
-	&Xupdate(\&body_00_15);
-	&Xupdate(\&body_00_15);
-$code.=<<___;
-	teq	$t1,#0				@ check for K256 terminator
-	ldr	$t1,[sp,#0]
-	sub	$Xfer,$Xfer,#64
-	bne	.L_00_48
-
-	ldr		$inp,[sp,#68]
-	ldr		$t0,[sp,#72]
-	sub		$Ktbl,$Ktbl,#256	@ rewind $Ktbl
-	teq		$inp,$t0
-	it		eq
-	subeq		$inp,$inp,#64		@ avoid SEGV
-	vld1.8		{@X[0]},[$inp]!		@ load next input block
-	vld1.8		{@X[1]},[$inp]!
-	vld1.8		{@X[2]},[$inp]!
-	vld1.8		{@X[3]},[$inp]!
-	it		ne
-	strne		$inp,[sp,#68]
-	mov		$Xfer,sp
-___
-	&Xpreload(\&body_00_15);
-	&Xpreload(\&body_00_15);
-	&Xpreload(\&body_00_15);
-	&Xpreload(\&body_00_15);
-$code.=<<___;
-	ldr	$t0,[$t1,#0]
-	add	$A,$A,$t2			@ h+=Maj(a,b,c) from the past
-	ldr	$t2,[$t1,#4]
-	ldr	$t3,[$t1,#8]
-	ldr	$t4,[$t1,#12]
-	add	$A,$A,$t0			@ accumulate
-	ldr	$t0,[$t1,#16]
-	add	$B,$B,$t2
-	ldr	$t2,[$t1,#20]
-	add	$C,$C,$t3
-	ldr	$t3,[$t1,#24]
-	add	$D,$D,$t4
-	ldr	$t4,[$t1,#28]
-	add	$E,$E,$t0
-	str	$A,[$t1],#4
-	add	$F,$F,$t2
-	str	$B,[$t1],#4
-	add	$G,$G,$t3
-	str	$C,[$t1],#4
-	add	$H,$H,$t4
-	str	$D,[$t1],#4
-	stmia	$t1,{$E-$H}
-
-	ittte	ne
-	movne	$Xfer,sp
-	ldrne	$t1,[sp,#0]
-	eorne	$t2,$t2,$t2
-	ldreq	sp,[sp,#76]			@ restore original sp
-	itt	ne
-	eorne	$t3,$B,$C
-	bne	.L_00_48
-
-	ldmia	sp!,{r4-r12,pc}
-.size	sha256_block_data_order_neon,.-sha256_block_data_order_neon
-#endif
-___
-}}}
-######################################################################
-# ARMv8 stuff
-#
-{{{
-my ($ABCD,$EFGH,$abcd)=map("q$_",(0..2));
-my @MSG=map("q$_",(8..11));
-my ($W0,$W1,$ABCD_SAVE,$EFGH_SAVE)=map("q$_",(12..15));
-my $Ktbl="r3";
-
-$code.=<<___;
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-
-# ifdef __thumb2__
-#  define INST(a,b,c,d)	.byte	c,d|0xc,a,b
-# else
-#  define INST(a,b,c,d)	.byte	a,b,c,d
-# endif
-
-.type	sha256_block_data_order_armv8,%function
-.align	5
-sha256_block_data_order_armv8:
-.LARMv8:
-	vld1.32	{$ABCD,$EFGH},[$ctx]
-# ifdef __thumb2__
-	adr	$Ktbl,.LARMv8
-	sub	$Ktbl,$Ktbl,#.LARMv8-K256
-# else
-	adrl	$Ktbl,K256
-# endif
-	add	$len,$inp,$len,lsl#6	@ len to point at the end of inp
-
-.Loop_v8:
-	vld1.8		{@MSG[0]-@MSG[1]},[$inp]!
-	vld1.8		{@MSG[2]-@MSG[3]},[$inp]!
-	vld1.32		{$W0},[$Ktbl]!
-	vrev32.8	@MSG[0],@MSG[0]
-	vrev32.8	@MSG[1],@MSG[1]
-	vrev32.8	@MSG[2],@MSG[2]
-	vrev32.8	@MSG[3],@MSG[3]
-	vmov		$ABCD_SAVE,$ABCD	@ offload
-	vmov		$EFGH_SAVE,$EFGH
-	teq		$inp,$len
-___
-for($i=0;$i<12;$i++) {
-$code.=<<___;
-	vld1.32		{$W1},[$Ktbl]!
-	vadd.i32	$W0,$W0,@MSG[0]
-	sha256su0	@MSG[0],@MSG[1]
-	vmov		$abcd,$ABCD
-	sha256h		$ABCD,$EFGH,$W0
-	sha256h2	$EFGH,$abcd,$W0
-	sha256su1	@MSG[0],@MSG[2],@MSG[3]
-___
-	($W0,$W1)=($W1,$W0);	push(@MSG,shift(@MSG));
-}
-$code.=<<___;
-	vld1.32		{$W1},[$Ktbl]!
-	vadd.i32	$W0,$W0,@MSG[0]
-	vmov		$abcd,$ABCD
-	sha256h		$ABCD,$EFGH,$W0
-	sha256h2	$EFGH,$abcd,$W0
-
-	vld1.32		{$W0},[$Ktbl]!
-	vadd.i32	$W1,$W1,@MSG[1]
-	vmov		$abcd,$ABCD
-	sha256h		$ABCD,$EFGH,$W1
-	sha256h2	$EFGH,$abcd,$W1
-
-	vld1.32		{$W1},[$Ktbl]
-	vadd.i32	$W0,$W0,@MSG[2]
-	sub		$Ktbl,$Ktbl,#256-16	@ rewind
-	vmov		$abcd,$ABCD
-	sha256h		$ABCD,$EFGH,$W0
-	sha256h2	$EFGH,$abcd,$W0
-
-	vadd.i32	$W1,$W1,@MSG[3]
-	vmov		$abcd,$ABCD
-	sha256h		$ABCD,$EFGH,$W1
-	sha256h2	$EFGH,$abcd,$W1
-
-	vadd.i32	$ABCD,$ABCD,$ABCD_SAVE
-	vadd.i32	$EFGH,$EFGH,$EFGH_SAVE
-	it		ne
-	bne		.Loop_v8
-
-	vst1.32		{$ABCD,$EFGH},[$ctx]
-
-	ret		@ bx lr
-.size	sha256_block_data_order_armv8,.-sha256_block_data_order_armv8
-#endif
-___
-}}}
-$code.=<<___;
-.asciz  "SHA256 block transform for ARMv4/NEON/ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
-.align	2
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-.comm   OPENSSL_armcap_P,4,4
-#endif
-___
-
-open SELF,$0;
-while(<SELF>) {
-	next if (/^#!/);
-	last if (!s/^#/@/ and !/^$/);
-	print;
-}
-close SELF;
-
-{   my  %opcode = (
-	"sha256h"	=> 0xf3000c40,	"sha256h2"	=> 0xf3100c40,
-	"sha256su0"	=> 0xf3ba03c0,	"sha256su1"	=> 0xf3200c40	);
-
-    sub unsha256 {
-	my ($mnemonic,$arg)=@_;
-
-	if ($arg =~ m/q([0-9]+)(?:,\s*q([0-9]+))?,\s*q([0-9]+)/o) {
-	    my $word = $opcode{$mnemonic}|(($1&7)<<13)|(($1&8)<<19)
-					 |(($2&7)<<17)|(($2&8)<<4)
-					 |(($3&7)<<1) |(($3&8)<<2);
-	    # since ARMv7 instructions are always encoded little-endian.
-	    # correct solution is to use .inst directive, but older
-	    # assemblers don't implement it:-(
-	    sprintf "INST(0x%02x,0x%02x,0x%02x,0x%02x)\t@ %s %s",
-			$word&0xff,($word>>8)&0xff,
-			($word>>16)&0xff,($word>>24)&0xff,
-			$mnemonic,$arg;
-	}
-    }
-}
-
-foreach (split($/,$code)) {
-
-	s/\`([^\`]*)\`/eval $1/geo;
-
-	s/\b(sha256\w+)\s+(q.*)/unsha256($1,$2)/geo;
-
-	s/\bret\b/bx	lr/go		or
-	s/\bbx\s+lr\b/.word\t0xe12fff1e/go;	# make it possible to compile with -march=armv4
-
-	print $_,"\n";
-}
-
-close STDOUT; # enforce flush
diff --git a/arch/arm/crypto/sha256_glue.c b/arch/arm/crypto/sha256_glue.c
deleted file mode 100644
index 433ee4ddce6c..000000000000
--- a/arch/arm/crypto/sha256_glue.c
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Glue code for the SHA256 Secure Hash Algorithm assembly implementation
- * using optimized ARM assembler and NEON instructions.
- *
- * Copyright © 2015 Google Inc.
- *
- * This file is based on sha256_ssse3_glue.c:
- *   Copyright (C) 2013 Intel Corporation
- *   Author: Tim Chen <tim.c.chen@linux.intel.com>
- */
-
-#include <crypto/internal/hash.h>
-#include <linux/crypto.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <crypto/sha2.h>
-#include <crypto/sha256_base.h>
-#include <asm/simd.h>
-#include <asm/neon.h>
-
-#include "sha256_glue.h"
-
-asmlinkage void sha256_block_data_order(u32 *digest, const void *data,
-					unsigned int num_blks);
-
-int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
-			     unsigned int len)
-{
-	/* make sure casting to sha256_block_fn() is safe */
-	BUILD_BUG_ON(offsetof(struct sha256_state, state) != 0);
-
-	return sha256_base_do_update(desc, data, len,
-				(sha256_block_fn *)sha256_block_data_order);
-}
-EXPORT_SYMBOL(crypto_sha256_arm_update);
-
-static int crypto_sha256_arm_final(struct shash_desc *desc, u8 *out)
-{
-	sha256_base_do_finalize(desc,
-				(sha256_block_fn *)sha256_block_data_order);
-	return sha256_base_finish(desc, out);
-}
-
-int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data,
-			    unsigned int len, u8 *out)
-{
-	sha256_base_do_update(desc, data, len,
-			      (sha256_block_fn *)sha256_block_data_order);
-	return crypto_sha256_arm_final(desc, out);
-}
-EXPORT_SYMBOL(crypto_sha256_arm_finup);
-
-static struct shash_alg algs[] = { {
-	.digestsize	=	SHA256_DIGEST_SIZE,
-	.init		=	sha256_base_init,
-	.update		=	crypto_sha256_arm_update,
-	.final		=	crypto_sha256_arm_final,
-	.finup		=	crypto_sha256_arm_finup,
-	.descsize	=	sizeof(struct sha256_state),
-	.base		=	{
-		.cra_name	=	"sha256",
-		.cra_driver_name =	"sha256-asm",
-		.cra_priority	=	150,
-		.cra_blocksize	=	SHA256_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-}, {
-	.digestsize	=	SHA224_DIGEST_SIZE,
-	.init		=	sha224_base_init,
-	.update		=	crypto_sha256_arm_update,
-	.final		=	crypto_sha256_arm_final,
-	.finup		=	crypto_sha256_arm_finup,
-	.descsize	=	sizeof(struct sha256_state),
-	.base		=	{
-		.cra_name	=	"sha224",
-		.cra_driver_name =	"sha224-asm",
-		.cra_priority	=	150,
-		.cra_blocksize	=	SHA224_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-} };
-
-static int __init sha256_mod_init(void)
-{
-	int res = crypto_register_shashes(algs, ARRAY_SIZE(algs));
-
-	if (res < 0)
-		return res;
-
-	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && cpu_has_neon()) {
-		res = crypto_register_shashes(sha256_neon_algs,
-					      ARRAY_SIZE(sha256_neon_algs));
-
-		if (res < 0)
-			crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-	}
-
-	return res;
-}
-
-static void __exit sha256_mod_fini(void)
-{
-	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-
-	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && cpu_has_neon())
-		crypto_unregister_shashes(sha256_neon_algs,
-					  ARRAY_SIZE(sha256_neon_algs));
-}
-
-module_init(sha256_mod_init);
-module_exit(sha256_mod_fini);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("SHA256 Secure Hash Algorithm (ARM), including NEON");
-
-MODULE_ALIAS_CRYPTO("sha256");
diff --git a/arch/arm/crypto/sha256_glue.h b/arch/arm/crypto/sha256_glue.h
deleted file mode 100644
index 9f0d578bab5f..000000000000
--- a/arch/arm/crypto/sha256_glue.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _CRYPTO_SHA256_GLUE_H
-#define _CRYPTO_SHA256_GLUE_H
-
-#include <linux/crypto.h>
-
-extern struct shash_alg sha256_neon_algs[2];
-
-int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
-			     unsigned int len);
-
-int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data,
-			    unsigned int len, u8 *hash);
-
-#endif /* _CRYPTO_SHA256_GLUE_H */
diff --git a/arch/arm/crypto/sha256_neon_glue.c b/arch/arm/crypto/sha256_neon_glue.c
deleted file mode 100644
index 701706262ef3..000000000000
--- a/arch/arm/crypto/sha256_neon_glue.c
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Glue code for the SHA256 Secure Hash Algorithm assembly implementation
- * using NEON instructions.
- *
- * Copyright © 2015 Google Inc.
- *
- * This file is based on sha512_neon_glue.c:
- *   Copyright © 2014 Jussi Kivilinna <jussi.kivilinna@iki.fi>
- */
-
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <crypto/sha2.h>
-#include <crypto/sha256_base.h>
-#include <asm/byteorder.h>
-#include <asm/simd.h>
-#include <asm/neon.h>
-
-#include "sha256_glue.h"
-
-asmlinkage void sha256_block_data_order_neon(u32 *digest, const void *data,
-					     unsigned int num_blks);
-
-static int crypto_sha256_neon_update(struct shash_desc *desc, const u8 *data,
-				     unsigned int len)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable() ||
-	    (sctx->count % SHA256_BLOCK_SIZE) + len < SHA256_BLOCK_SIZE)
-		return crypto_sha256_arm_update(desc, data, len);
-
-	kernel_neon_begin();
-	sha256_base_do_update(desc, data, len,
-			(sha256_block_fn *)sha256_block_data_order_neon);
-	kernel_neon_end();
-
-	return 0;
-}
-
-static int crypto_sha256_neon_finup(struct shash_desc *desc, const u8 *data,
-				    unsigned int len, u8 *out)
-{
-	if (!crypto_simd_usable())
-		return crypto_sha256_arm_finup(desc, data, len, out);
-
-	kernel_neon_begin();
-	if (len)
-		sha256_base_do_update(desc, data, len,
-			(sha256_block_fn *)sha256_block_data_order_neon);
-	sha256_base_do_finalize(desc,
-			(sha256_block_fn *)sha256_block_data_order_neon);
-	kernel_neon_end();
-
-	return sha256_base_finish(desc, out);
-}
-
-static int crypto_sha256_neon_final(struct shash_desc *desc, u8 *out)
-{
-	return crypto_sha256_neon_finup(desc, NULL, 0, out);
-}
-
-struct shash_alg sha256_neon_algs[] = { {
-	.digestsize	=	SHA256_DIGEST_SIZE,
-	.init		=	sha256_base_init,
-	.update		=	crypto_sha256_neon_update,
-	.final		=	crypto_sha256_neon_final,
-	.finup		=	crypto_sha256_neon_finup,
-	.descsize	=	sizeof(struct sha256_state),
-	.base		=	{
-		.cra_name	=	"sha256",
-		.cra_driver_name =	"sha256-neon",
-		.cra_priority	=	250,
-		.cra_blocksize	=	SHA256_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-}, {
-	.digestsize	=	SHA224_DIGEST_SIZE,
-	.init		=	sha224_base_init,
-	.update		=	crypto_sha256_neon_update,
-	.final		=	crypto_sha256_neon_final,
-	.finup		=	crypto_sha256_neon_finup,
-	.descsize	=	sizeof(struct sha256_state),
-	.base		=	{
-		.cra_name	=	"sha224",
-		.cra_driver_name =	"sha224-neon",
-		.cra_priority	=	250,
-		.cra_blocksize	=	SHA224_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-} };
diff --git a/arch/arm/crypto/sha512-armv4.pl b/arch/arm/crypto/sha512-armv4.pl
deleted file mode 100644
index 2fc3516912fa..000000000000
--- a/arch/arm/crypto/sha512-armv4.pl
+++ /dev/null
@@ -1,657 +0,0 @@
-#!/usr/bin/env perl
-# SPDX-License-Identifier: GPL-2.0
-
-# This code is taken from the OpenSSL project but the author (Andy Polyakov)
-# has relicensed it under the GPLv2. Therefore this program is free software;
-# you can redistribute it and/or modify it under the terms of the GNU General
-# Public License version 2 as published by the Free Software Foundation.
-#
-# The original headers, including the original license headers, are
-# included below for completeness.
-
-# ====================================================================
-# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see https://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-
-# SHA512 block procedure for ARMv4. September 2007.
-
-# This code is ~4.5 (four and a half) times faster than code generated
-# by gcc 3.4 and it spends ~72 clock cycles per byte [on single-issue
-# Xscale PXA250 core].
-#
-# July 2010.
-#
-# Rescheduling for dual-issue pipeline resulted in 6% improvement on
-# Cortex A8 core and ~40 cycles per processed byte.
-
-# February 2011.
-#
-# Profiler-assisted and platform-specific optimization resulted in 7%
-# improvement on Coxtex A8 core and ~38 cycles per byte.
-
-# March 2011.
-#
-# Add NEON implementation. On Cortex A8 it was measured to process
-# one byte in 23.3 cycles or ~60% faster than integer-only code.
-
-# August 2012.
-#
-# Improve NEON performance by 12% on Snapdragon S4. In absolute
-# terms it's 22.6 cycles per byte, which is disappointing result.
-# Technical writers asserted that 3-way S4 pipeline can sustain
-# multiple NEON instructions per cycle, but dual NEON issue could
-# not be observed, see https://www.openssl.org/~appro/Snapdragon-S4.html
-# for further details. On side note Cortex-A15 processes one byte in
-# 16 cycles.
-
-# Byte order [in]dependence. =========================================
-#
-# Originally caller was expected to maintain specific *dword* order in
-# h[0-7], namely with most significant dword at *lower* address, which
-# was reflected in below two parameters as 0 and 4. Now caller is
-# expected to maintain native byte order for whole 64-bit values.
-$hi="HI";
-$lo="LO";
-# ====================================================================
-
-while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
-
-$ctx="r0";	# parameter block
-$inp="r1";
-$len="r2";
-
-$Tlo="r3";
-$Thi="r4";
-$Alo="r5";
-$Ahi="r6";
-$Elo="r7";
-$Ehi="r8";
-$t0="r9";
-$t1="r10";
-$t2="r11";
-$t3="r12";
-############	r13 is stack pointer
-$Ktbl="r14";
-############	r15 is program counter
-
-$Aoff=8*0;
-$Boff=8*1;
-$Coff=8*2;
-$Doff=8*3;
-$Eoff=8*4;
-$Foff=8*5;
-$Goff=8*6;
-$Hoff=8*7;
-$Xoff=8*8;
-
-sub BODY_00_15() {
-my $magic = shift;
-$code.=<<___;
-	@ Sigma1(x)	(ROTR((x),14) ^ ROTR((x),18)  ^ ROTR((x),41))
-	@ LO		lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23
-	@ HI		hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23
-	mov	$t0,$Elo,lsr#14
-	str	$Tlo,[sp,#$Xoff+0]
-	mov	$t1,$Ehi,lsr#14
-	str	$Thi,[sp,#$Xoff+4]
-	eor	$t0,$t0,$Ehi,lsl#18
-	ldr	$t2,[sp,#$Hoff+0]	@ h.lo
-	eor	$t1,$t1,$Elo,lsl#18
-	ldr	$t3,[sp,#$Hoff+4]	@ h.hi
-	eor	$t0,$t0,$Elo,lsr#18
-	eor	$t1,$t1,$Ehi,lsr#18
-	eor	$t0,$t0,$Ehi,lsl#14
-	eor	$t1,$t1,$Elo,lsl#14
-	eor	$t0,$t0,$Ehi,lsr#9
-	eor	$t1,$t1,$Elo,lsr#9
-	eor	$t0,$t0,$Elo,lsl#23
-	eor	$t1,$t1,$Ehi,lsl#23	@ Sigma1(e)
-	adds	$Tlo,$Tlo,$t0
-	ldr	$t0,[sp,#$Foff+0]	@ f.lo
-	adc	$Thi,$Thi,$t1		@ T += Sigma1(e)
-	ldr	$t1,[sp,#$Foff+4]	@ f.hi
-	adds	$Tlo,$Tlo,$t2
-	ldr	$t2,[sp,#$Goff+0]	@ g.lo
-	adc	$Thi,$Thi,$t3		@ T += h
-	ldr	$t3,[sp,#$Goff+4]	@ g.hi
-
-	eor	$t0,$t0,$t2
-	str	$Elo,[sp,#$Eoff+0]
-	eor	$t1,$t1,$t3
-	str	$Ehi,[sp,#$Eoff+4]
-	and	$t0,$t0,$Elo
-	str	$Alo,[sp,#$Aoff+0]
-	and	$t1,$t1,$Ehi
-	str	$Ahi,[sp,#$Aoff+4]
-	eor	$t0,$t0,$t2
-	ldr	$t2,[$Ktbl,#$lo]	@ K[i].lo
-	eor	$t1,$t1,$t3		@ Ch(e,f,g)
-	ldr	$t3,[$Ktbl,#$hi]	@ K[i].hi
-
-	adds	$Tlo,$Tlo,$t0
-	ldr	$Elo,[sp,#$Doff+0]	@ d.lo
-	adc	$Thi,$Thi,$t1		@ T += Ch(e,f,g)
-	ldr	$Ehi,[sp,#$Doff+4]	@ d.hi
-	adds	$Tlo,$Tlo,$t2
-	and	$t0,$t2,#0xff
-	adc	$Thi,$Thi,$t3		@ T += K[i]
-	adds	$Elo,$Elo,$Tlo
-	ldr	$t2,[sp,#$Boff+0]	@ b.lo
-	adc	$Ehi,$Ehi,$Thi		@ d += T
-	teq	$t0,#$magic
-
-	ldr	$t3,[sp,#$Coff+0]	@ c.lo
-#if __ARM_ARCH__>=7
-	it	eq			@ Thumb2 thing, sanity check in ARM
-#endif
-	orreq	$Ktbl,$Ktbl,#1
-	@ Sigma0(x)	(ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39))
-	@ LO		lo>>28^hi<<4  ^ hi>>2^lo<<30 ^ hi>>7^lo<<25
-	@ HI		hi>>28^lo<<4  ^ lo>>2^hi<<30 ^ lo>>7^hi<<25
-	mov	$t0,$Alo,lsr#28
-	mov	$t1,$Ahi,lsr#28
-	eor	$t0,$t0,$Ahi,lsl#4
-	eor	$t1,$t1,$Alo,lsl#4
-	eor	$t0,$t0,$Ahi,lsr#2
-	eor	$t1,$t1,$Alo,lsr#2
-	eor	$t0,$t0,$Alo,lsl#30
-	eor	$t1,$t1,$Ahi,lsl#30
-	eor	$t0,$t0,$Ahi,lsr#7
-	eor	$t1,$t1,$Alo,lsr#7
-	eor	$t0,$t0,$Alo,lsl#25
-	eor	$t1,$t1,$Ahi,lsl#25	@ Sigma0(a)
-	adds	$Tlo,$Tlo,$t0
-	and	$t0,$Alo,$t2
-	adc	$Thi,$Thi,$t1		@ T += Sigma0(a)
-
-	ldr	$t1,[sp,#$Boff+4]	@ b.hi
-	orr	$Alo,$Alo,$t2
-	ldr	$t2,[sp,#$Coff+4]	@ c.hi
-	and	$Alo,$Alo,$t3
-	and	$t3,$Ahi,$t1
-	orr	$Ahi,$Ahi,$t1
-	orr	$Alo,$Alo,$t0		@ Maj(a,b,c).lo
-	and	$Ahi,$Ahi,$t2
-	adds	$Alo,$Alo,$Tlo
-	orr	$Ahi,$Ahi,$t3		@ Maj(a,b,c).hi
-	sub	sp,sp,#8
-	adc	$Ahi,$Ahi,$Thi		@ h += T
-	tst	$Ktbl,#1
-	add	$Ktbl,$Ktbl,#8
-___
-}
-$code=<<___;
-#ifndef __KERNEL__
-# include "arm_arch.h"
-# define VFP_ABI_PUSH	vstmdb	sp!,{d8-d15}
-# define VFP_ABI_POP	vldmia	sp!,{d8-d15}
-#else
-# define __ARM_ARCH__ __LINUX_ARM_ARCH__
-# define __ARM_MAX_ARCH__ 7
-# define VFP_ABI_PUSH
-# define VFP_ABI_POP
-#endif
-
-#ifdef __ARMEL__
-# define LO 0
-# define HI 4
-# define WORD64(hi0,lo0,hi1,lo1)	.word	lo0,hi0, lo1,hi1
-#else
-# define HI 0
-# define LO 4
-# define WORD64(hi0,lo0,hi1,lo1)	.word	hi0,lo0, hi1,lo1
-#endif
-
-.text
-#if __ARM_ARCH__<7
-.code	32
-#else
-.syntax unified
-# ifdef __thumb2__
-.thumb
-# else
-.code   32
-# endif
-#endif
-
-.type	K512,%object
-.align	5
-K512:
-WORD64(0x428a2f98,0xd728ae22, 0x71374491,0x23ef65cd)
-WORD64(0xb5c0fbcf,0xec4d3b2f, 0xe9b5dba5,0x8189dbbc)
-WORD64(0x3956c25b,0xf348b538, 0x59f111f1,0xb605d019)
-WORD64(0x923f82a4,0xaf194f9b, 0xab1c5ed5,0xda6d8118)
-WORD64(0xd807aa98,0xa3030242, 0x12835b01,0x45706fbe)
-WORD64(0x243185be,0x4ee4b28c, 0x550c7dc3,0xd5ffb4e2)
-WORD64(0x72be5d74,0xf27b896f, 0x80deb1fe,0x3b1696b1)
-WORD64(0x9bdc06a7,0x25c71235, 0xc19bf174,0xcf692694)
-WORD64(0xe49b69c1,0x9ef14ad2, 0xefbe4786,0x384f25e3)
-WORD64(0x0fc19dc6,0x8b8cd5b5, 0x240ca1cc,0x77ac9c65)
-WORD64(0x2de92c6f,0x592b0275, 0x4a7484aa,0x6ea6e483)
-WORD64(0x5cb0a9dc,0xbd41fbd4, 0x76f988da,0x831153b5)
-WORD64(0x983e5152,0xee66dfab, 0xa831c66d,0x2db43210)
-WORD64(0xb00327c8,0x98fb213f, 0xbf597fc7,0xbeef0ee4)
-WORD64(0xc6e00bf3,0x3da88fc2, 0xd5a79147,0x930aa725)
-WORD64(0x06ca6351,0xe003826f, 0x14292967,0x0a0e6e70)
-WORD64(0x27b70a85,0x46d22ffc, 0x2e1b2138,0x5c26c926)
-WORD64(0x4d2c6dfc,0x5ac42aed, 0x53380d13,0x9d95b3df)
-WORD64(0x650a7354,0x8baf63de, 0x766a0abb,0x3c77b2a8)
-WORD64(0x81c2c92e,0x47edaee6, 0x92722c85,0x1482353b)
-WORD64(0xa2bfe8a1,0x4cf10364, 0xa81a664b,0xbc423001)
-WORD64(0xc24b8b70,0xd0f89791, 0xc76c51a3,0x0654be30)
-WORD64(0xd192e819,0xd6ef5218, 0xd6990624,0x5565a910)
-WORD64(0xf40e3585,0x5771202a, 0x106aa070,0x32bbd1b8)
-WORD64(0x19a4c116,0xb8d2d0c8, 0x1e376c08,0x5141ab53)
-WORD64(0x2748774c,0xdf8eeb99, 0x34b0bcb5,0xe19b48a8)
-WORD64(0x391c0cb3,0xc5c95a63, 0x4ed8aa4a,0xe3418acb)
-WORD64(0x5b9cca4f,0x7763e373, 0x682e6ff3,0xd6b2b8a3)
-WORD64(0x748f82ee,0x5defb2fc, 0x78a5636f,0x43172f60)
-WORD64(0x84c87814,0xa1f0ab72, 0x8cc70208,0x1a6439ec)
-WORD64(0x90befffa,0x23631e28, 0xa4506ceb,0xde82bde9)
-WORD64(0xbef9a3f7,0xb2c67915, 0xc67178f2,0xe372532b)
-WORD64(0xca273ece,0xea26619c, 0xd186b8c7,0x21c0c207)
-WORD64(0xeada7dd6,0xcde0eb1e, 0xf57d4f7f,0xee6ed178)
-WORD64(0x06f067aa,0x72176fba, 0x0a637dc5,0xa2c898a6)
-WORD64(0x113f9804,0xbef90dae, 0x1b710b35,0x131c471b)
-WORD64(0x28db77f5,0x23047d84, 0x32caab7b,0x40c72493)
-WORD64(0x3c9ebe0a,0x15c9bebc, 0x431d67c4,0x9c100d4c)
-WORD64(0x4cc5d4be,0xcb3e42b6, 0x597f299c,0xfc657e2a)
-WORD64(0x5fcb6fab,0x3ad6faec, 0x6c44198c,0x4a475817)
-.size	K512,.-K512
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-.LOPENSSL_armcap:
-.word	OPENSSL_armcap_P-sha512_block_data_order
-.skip	32-4
-#else
-.skip	32
-#endif
-
-.global	sha512_block_data_order
-.type	sha512_block_data_order,%function
-sha512_block_data_order:
-.Lsha512_block_data_order:
-#if __ARM_ARCH__<7
-	sub	r3,pc,#8		@ sha512_block_data_order
-#else
-	adr	r3,.Lsha512_block_data_order
-#endif
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-	ldr	r12,.LOPENSSL_armcap
-	ldr	r12,[r3,r12]		@ OPENSSL_armcap_P
-	tst	r12,#1
-	bne	.LNEON
-#endif
-	add	$len,$inp,$len,lsl#7	@ len to point at the end of inp
-	stmdb	sp!,{r4-r12,lr}
-	sub	$Ktbl,r3,#672		@ K512
-	sub	sp,sp,#9*8
-
-	ldr	$Elo,[$ctx,#$Eoff+$lo]
-	ldr	$Ehi,[$ctx,#$Eoff+$hi]
-	ldr	$t0, [$ctx,#$Goff+$lo]
-	ldr	$t1, [$ctx,#$Goff+$hi]
-	ldr	$t2, [$ctx,#$Hoff+$lo]
-	ldr	$t3, [$ctx,#$Hoff+$hi]
-.Loop:
-	str	$t0, [sp,#$Goff+0]
-	str	$t1, [sp,#$Goff+4]
-	str	$t2, [sp,#$Hoff+0]
-	str	$t3, [sp,#$Hoff+4]
-	ldr	$Alo,[$ctx,#$Aoff+$lo]
-	ldr	$Ahi,[$ctx,#$Aoff+$hi]
-	ldr	$Tlo,[$ctx,#$Boff+$lo]
-	ldr	$Thi,[$ctx,#$Boff+$hi]
-	ldr	$t0, [$ctx,#$Coff+$lo]
-	ldr	$t1, [$ctx,#$Coff+$hi]
-	ldr	$t2, [$ctx,#$Doff+$lo]
-	ldr	$t3, [$ctx,#$Doff+$hi]
-	str	$Tlo,[sp,#$Boff+0]
-	str	$Thi,[sp,#$Boff+4]
-	str	$t0, [sp,#$Coff+0]
-	str	$t1, [sp,#$Coff+4]
-	str	$t2, [sp,#$Doff+0]
-	str	$t3, [sp,#$Doff+4]
-	ldr	$Tlo,[$ctx,#$Foff+$lo]
-	ldr	$Thi,[$ctx,#$Foff+$hi]
-	str	$Tlo,[sp,#$Foff+0]
-	str	$Thi,[sp,#$Foff+4]
-
-.L00_15:
-#if __ARM_ARCH__<7
-	ldrb	$Tlo,[$inp,#7]
-	ldrb	$t0, [$inp,#6]
-	ldrb	$t1, [$inp,#5]
-	ldrb	$t2, [$inp,#4]
-	ldrb	$Thi,[$inp,#3]
-	ldrb	$t3, [$inp,#2]
-	orr	$Tlo,$Tlo,$t0,lsl#8
-	ldrb	$t0, [$inp,#1]
-	orr	$Tlo,$Tlo,$t1,lsl#16
-	ldrb	$t1, [$inp],#8
-	orr	$Tlo,$Tlo,$t2,lsl#24
-	orr	$Thi,$Thi,$t3,lsl#8
-	orr	$Thi,$Thi,$t0,lsl#16
-	orr	$Thi,$Thi,$t1,lsl#24
-#else
-	ldr	$Tlo,[$inp,#4]
-	ldr	$Thi,[$inp],#8
-#ifdef __ARMEL__
-	rev	$Tlo,$Tlo
-	rev	$Thi,$Thi
-#endif
-#endif
-___
-	&BODY_00_15(0x94);
-$code.=<<___;
-	tst	$Ktbl,#1
-	beq	.L00_15
-	ldr	$t0,[sp,#`$Xoff+8*(16-1)`+0]
-	ldr	$t1,[sp,#`$Xoff+8*(16-1)`+4]
-	bic	$Ktbl,$Ktbl,#1
-.L16_79:
-	@ sigma0(x)	(ROTR((x),1)  ^ ROTR((x),8)  ^ ((x)>>7))
-	@ LO		lo>>1^hi<<31  ^ lo>>8^hi<<24 ^ lo>>7^hi<<25
-	@ HI		hi>>1^lo<<31  ^ hi>>8^lo<<24 ^ hi>>7
-	mov	$Tlo,$t0,lsr#1
-	ldr	$t2,[sp,#`$Xoff+8*(16-14)`+0]
-	mov	$Thi,$t1,lsr#1
-	ldr	$t3,[sp,#`$Xoff+8*(16-14)`+4]
-	eor	$Tlo,$Tlo,$t1,lsl#31
-	eor	$Thi,$Thi,$t0,lsl#31
-	eor	$Tlo,$Tlo,$t0,lsr#8
-	eor	$Thi,$Thi,$t1,lsr#8
-	eor	$Tlo,$Tlo,$t1,lsl#24
-	eor	$Thi,$Thi,$t0,lsl#24
-	eor	$Tlo,$Tlo,$t0,lsr#7
-	eor	$Thi,$Thi,$t1,lsr#7
-	eor	$Tlo,$Tlo,$t1,lsl#25
-
-	@ sigma1(x)	(ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6))
-	@ LO		lo>>19^hi<<13 ^ hi>>29^lo<<3 ^ lo>>6^hi<<26
-	@ HI		hi>>19^lo<<13 ^ lo>>29^hi<<3 ^ hi>>6
-	mov	$t0,$t2,lsr#19
-	mov	$t1,$t3,lsr#19
-	eor	$t0,$t0,$t3,lsl#13
-	eor	$t1,$t1,$t2,lsl#13
-	eor	$t0,$t0,$t3,lsr#29
-	eor	$t1,$t1,$t2,lsr#29
-	eor	$t0,$t0,$t2,lsl#3
-	eor	$t1,$t1,$t3,lsl#3
-	eor	$t0,$t0,$t2,lsr#6
-	eor	$t1,$t1,$t3,lsr#6
-	ldr	$t2,[sp,#`$Xoff+8*(16-9)`+0]
-	eor	$t0,$t0,$t3,lsl#26
-
-	ldr	$t3,[sp,#`$Xoff+8*(16-9)`+4]
-	adds	$Tlo,$Tlo,$t0
-	ldr	$t0,[sp,#`$Xoff+8*16`+0]
-	adc	$Thi,$Thi,$t1
-
-	ldr	$t1,[sp,#`$Xoff+8*16`+4]
-	adds	$Tlo,$Tlo,$t2
-	adc	$Thi,$Thi,$t3
-	adds	$Tlo,$Tlo,$t0
-	adc	$Thi,$Thi,$t1
-___
-	&BODY_00_15(0x17);
-$code.=<<___;
-#if __ARM_ARCH__>=7
-	ittt	eq			@ Thumb2 thing, sanity check in ARM
-#endif
-	ldreq	$t0,[sp,#`$Xoff+8*(16-1)`+0]
-	ldreq	$t1,[sp,#`$Xoff+8*(16-1)`+4]
-	beq	.L16_79
-	bic	$Ktbl,$Ktbl,#1
-
-	ldr	$Tlo,[sp,#$Boff+0]
-	ldr	$Thi,[sp,#$Boff+4]
-	ldr	$t0, [$ctx,#$Aoff+$lo]
-	ldr	$t1, [$ctx,#$Aoff+$hi]
-	ldr	$t2, [$ctx,#$Boff+$lo]
-	ldr	$t3, [$ctx,#$Boff+$hi]
-	adds	$t0,$Alo,$t0
-	str	$t0, [$ctx,#$Aoff+$lo]
-	adc	$t1,$Ahi,$t1
-	str	$t1, [$ctx,#$Aoff+$hi]
-	adds	$t2,$Tlo,$t2
-	str	$t2, [$ctx,#$Boff+$lo]
-	adc	$t3,$Thi,$t3
-	str	$t3, [$ctx,#$Boff+$hi]
-
-	ldr	$Alo,[sp,#$Coff+0]
-	ldr	$Ahi,[sp,#$Coff+4]
-	ldr	$Tlo,[sp,#$Doff+0]
-	ldr	$Thi,[sp,#$Doff+4]
-	ldr	$t0, [$ctx,#$Coff+$lo]
-	ldr	$t1, [$ctx,#$Coff+$hi]
-	ldr	$t2, [$ctx,#$Doff+$lo]
-	ldr	$t3, [$ctx,#$Doff+$hi]
-	adds	$t0,$Alo,$t0
-	str	$t0, [$ctx,#$Coff+$lo]
-	adc	$t1,$Ahi,$t1
-	str	$t1, [$ctx,#$Coff+$hi]
-	adds	$t2,$Tlo,$t2
-	str	$t2, [$ctx,#$Doff+$lo]
-	adc	$t3,$Thi,$t3
-	str	$t3, [$ctx,#$Doff+$hi]
-
-	ldr	$Tlo,[sp,#$Foff+0]
-	ldr	$Thi,[sp,#$Foff+4]
-	ldr	$t0, [$ctx,#$Eoff+$lo]
-	ldr	$t1, [$ctx,#$Eoff+$hi]
-	ldr	$t2, [$ctx,#$Foff+$lo]
-	ldr	$t3, [$ctx,#$Foff+$hi]
-	adds	$Elo,$Elo,$t0
-	str	$Elo,[$ctx,#$Eoff+$lo]
-	adc	$Ehi,$Ehi,$t1
-	str	$Ehi,[$ctx,#$Eoff+$hi]
-	adds	$t2,$Tlo,$t2
-	str	$t2, [$ctx,#$Foff+$lo]
-	adc	$t3,$Thi,$t3
-	str	$t3, [$ctx,#$Foff+$hi]
-
-	ldr	$Alo,[sp,#$Goff+0]
-	ldr	$Ahi,[sp,#$Goff+4]
-	ldr	$Tlo,[sp,#$Hoff+0]
-	ldr	$Thi,[sp,#$Hoff+4]
-	ldr	$t0, [$ctx,#$Goff+$lo]
-	ldr	$t1, [$ctx,#$Goff+$hi]
-	ldr	$t2, [$ctx,#$Hoff+$lo]
-	ldr	$t3, [$ctx,#$Hoff+$hi]
-	adds	$t0,$Alo,$t0
-	str	$t0, [$ctx,#$Goff+$lo]
-	adc	$t1,$Ahi,$t1
-	str	$t1, [$ctx,#$Goff+$hi]
-	adds	$t2,$Tlo,$t2
-	str	$t2, [$ctx,#$Hoff+$lo]
-	adc	$t3,$Thi,$t3
-	str	$t3, [$ctx,#$Hoff+$hi]
-
-	add	sp,sp,#640
-	sub	$Ktbl,$Ktbl,#640
-
-	teq	$inp,$len
-	bne	.Loop
-
-	add	sp,sp,#8*9		@ destroy frame
-#if __ARM_ARCH__>=5
-	ldmia	sp!,{r4-r12,pc}
-#else
-	ldmia	sp!,{r4-r12,lr}
-	tst	lr,#1
-	moveq	pc,lr			@ be binary compatible with V4, yet
-	bx	lr			@ interoperable with Thumb ISA:-)
-#endif
-.size	sha512_block_data_order,.-sha512_block_data_order
-___
-
-{
-my @Sigma0=(28,34,39);
-my @Sigma1=(14,18,41);
-my @sigma0=(1, 8, 7);
-my @sigma1=(19,61,6);
-
-my $Ktbl="r3";
-my $cnt="r12";	# volatile register known as ip, intra-procedure-call scratch
-
-my @X=map("d$_",(0..15));
-my @V=($A,$B,$C,$D,$E,$F,$G,$H)=map("d$_",(16..23));
-
-sub NEON_00_15() {
-my $i=shift;
-my ($a,$b,$c,$d,$e,$f,$g,$h)=@_;
-my ($t0,$t1,$t2,$T1,$K,$Ch,$Maj)=map("d$_",(24..31));	# temps
-
-$code.=<<___ if ($i<16 || $i&1);
-	vshr.u64	$t0,$e,#@Sigma1[0]	@ $i
-#if $i<16
-	vld1.64		{@X[$i%16]},[$inp]!	@ handles unaligned
-#endif
-	vshr.u64	$t1,$e,#@Sigma1[1]
-#if $i>0
-	 vadd.i64	$a,$Maj			@ h+=Maj from the past
-#endif
-	vshr.u64	$t2,$e,#@Sigma1[2]
-___
-$code.=<<___;
-	vld1.64		{$K},[$Ktbl,:64]!	@ K[i++]
-	vsli.64		$t0,$e,#`64-@Sigma1[0]`
-	vsli.64		$t1,$e,#`64-@Sigma1[1]`
-	vmov		$Ch,$e
-	vsli.64		$t2,$e,#`64-@Sigma1[2]`
-#if $i<16 && defined(__ARMEL__)
-	vrev64.8	@X[$i],@X[$i]
-#endif
-	veor		$t1,$t0
-	vbsl		$Ch,$f,$g		@ Ch(e,f,g)
-	vshr.u64	$t0,$a,#@Sigma0[0]
-	veor		$t2,$t1			@ Sigma1(e)
-	vadd.i64	$T1,$Ch,$h
-	vshr.u64	$t1,$a,#@Sigma0[1]
-	vsli.64		$t0,$a,#`64-@Sigma0[0]`
-	vadd.i64	$T1,$t2
-	vshr.u64	$t2,$a,#@Sigma0[2]
-	vadd.i64	$K,@X[$i%16]
-	vsli.64		$t1,$a,#`64-@Sigma0[1]`
-	veor		$Maj,$a,$b
-	vsli.64		$t2,$a,#`64-@Sigma0[2]`
-	veor		$h,$t0,$t1
-	vadd.i64	$T1,$K
-	vbsl		$Maj,$c,$b		@ Maj(a,b,c)
-	veor		$h,$t2			@ Sigma0(a)
-	vadd.i64	$d,$T1
-	vadd.i64	$Maj,$T1
-	@ vadd.i64	$h,$Maj
-___
-}
-
-sub NEON_16_79() {
-my $i=shift;
-
-if ($i&1)	{ &NEON_00_15($i,@_); return; }
-
-# 2x-vectorized, therefore runs every 2nd round
-my @X=map("q$_",(0..7));			# view @X as 128-bit vector
-my ($t0,$t1,$s0,$s1) = map("q$_",(12..15));	# temps
-my ($d0,$d1,$d2) = map("d$_",(24..26));		# temps from NEON_00_15
-my $e=@_[4];					# $e from NEON_00_15
-$i /= 2;
-$code.=<<___;
-	vshr.u64	$t0,@X[($i+7)%8],#@sigma1[0]
-	vshr.u64	$t1,@X[($i+7)%8],#@sigma1[1]
-	 vadd.i64	@_[0],d30			@ h+=Maj from the past
-	vshr.u64	$s1,@X[($i+7)%8],#@sigma1[2]
-	vsli.64		$t0,@X[($i+7)%8],#`64-@sigma1[0]`
-	vext.8		$s0,@X[$i%8],@X[($i+1)%8],#8	@ X[i+1]
-	vsli.64		$t1,@X[($i+7)%8],#`64-@sigma1[1]`
-	veor		$s1,$t0
-	vshr.u64	$t0,$s0,#@sigma0[0]
-	veor		$s1,$t1				@ sigma1(X[i+14])
-	vshr.u64	$t1,$s0,#@sigma0[1]
-	vadd.i64	@X[$i%8],$s1
-	vshr.u64	$s1,$s0,#@sigma0[2]
-	vsli.64		$t0,$s0,#`64-@sigma0[0]`
-	vsli.64		$t1,$s0,#`64-@sigma0[1]`
-	vext.8		$s0,@X[($i+4)%8],@X[($i+5)%8],#8	@ X[i+9]
-	veor		$s1,$t0
-	vshr.u64	$d0,$e,#@Sigma1[0]		@ from NEON_00_15
-	vadd.i64	@X[$i%8],$s0
-	vshr.u64	$d1,$e,#@Sigma1[1]		@ from NEON_00_15
-	veor		$s1,$t1				@ sigma0(X[i+1])
-	vshr.u64	$d2,$e,#@Sigma1[2]		@ from NEON_00_15
-	vadd.i64	@X[$i%8],$s1
-___
-	&NEON_00_15(2*$i,@_);
-}
-
-$code.=<<___;
-#if __ARM_MAX_ARCH__>=7
-.arch	armv7-a
-.fpu	neon
-
-.global	sha512_block_data_order_neon
-.type	sha512_block_data_order_neon,%function
-.align	4
-sha512_block_data_order_neon:
-.LNEON:
-	dmb				@ errata #451034 on early Cortex A8
-	add	$len,$inp,$len,lsl#7	@ len to point at the end of inp
-	VFP_ABI_PUSH
-	adr	$Ktbl,.Lsha512_block_data_order
-	sub	$Ktbl,$Ktbl,.Lsha512_block_data_order-K512
-	vldmia	$ctx,{$A-$H}		@ load context
-.Loop_neon:
-___
-for($i=0;$i<16;$i++)	{ &NEON_00_15($i,@V); unshift(@V,pop(@V)); }
-$code.=<<___;
-	mov		$cnt,#4
-.L16_79_neon:
-	subs		$cnt,#1
-___
-for(;$i<32;$i++)	{ &NEON_16_79($i,@V); unshift(@V,pop(@V)); }
-$code.=<<___;
-	bne		.L16_79_neon
-
-	 vadd.i64	$A,d30		@ h+=Maj from the past
-	vldmia		$ctx,{d24-d31}	@ load context to temp
-	vadd.i64	q8,q12		@ vectorized accumulate
-	vadd.i64	q9,q13
-	vadd.i64	q10,q14
-	vadd.i64	q11,q15
-	vstmia		$ctx,{$A-$H}	@ save context
-	teq		$inp,$len
-	sub		$Ktbl,#640	@ rewind K512
-	bne		.Loop_neon
-
-	VFP_ABI_POP
-	ret				@ bx lr
-.size	sha512_block_data_order_neon,.-sha512_block_data_order_neon
-#endif
-___
-}
-$code.=<<___;
-.asciz	"SHA512 block transform for ARMv4/NEON, CRYPTOGAMS by <appro\@openssl.org>"
-.align	2
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-.comm	OPENSSL_armcap_P,4,4
-#endif
-___
-
-$code =~ s/\`([^\`]*)\`/eval $1/gem;
-$code =~ s/\bbx\s+lr\b/.word\t0xe12fff1e/gm;	# make it possible to compile with -march=armv4
-$code =~ s/\bret\b/bx	lr/gm;
-
-open SELF,$0;
-while(<SELF>) {
-	next if (/^#!/);
-	last if (!s/^#/@/ and !/^$/);
-	print;
-}
-close SELF;
-
-print $code;
-close STDOUT; # enforce flush
diff --git a/arch/arm/crypto/sha512-glue.c b/arch/arm/crypto/sha512-glue.c
deleted file mode 100644
index 0635a65aa488..000000000000
--- a/arch/arm/crypto/sha512-glue.c
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * sha512-glue.c - accelerated SHA-384/512 for ARM
- *
- * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <crypto/internal/hash.h>
-#include <crypto/sha2.h>
-#include <crypto/sha512_base.h>
-#include <linux/crypto.h>
-#include <linux/module.h>
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-
-#include "sha512.h"
-
-MODULE_DESCRIPTION("Accelerated SHA-384/SHA-512 secure hash for ARM");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-
-MODULE_ALIAS_CRYPTO("sha384");
-MODULE_ALIAS_CRYPTO("sha512");
-MODULE_ALIAS_CRYPTO("sha384-arm");
-MODULE_ALIAS_CRYPTO("sha512-arm");
-
-asmlinkage void sha512_block_data_order(u64 *state, u8 const *src, int blocks);
-
-int sha512_arm_update(struct shash_desc *desc, const u8 *data,
-		      unsigned int len)
-{
-	return sha512_base_do_update(desc, data, len,
-		(sha512_block_fn *)sha512_block_data_order);
-}
-
-static int sha512_arm_final(struct shash_desc *desc, u8 *out)
-{
-	sha512_base_do_finalize(desc,
-		(sha512_block_fn *)sha512_block_data_order);
-	return sha512_base_finish(desc, out);
-}
-
-int sha512_arm_finup(struct shash_desc *desc, const u8 *data,
-		     unsigned int len, u8 *out)
-{
-	sha512_base_do_update(desc, data, len,
-		(sha512_block_fn *)sha512_block_data_order);
-	return sha512_arm_final(desc, out);
-}
-
-static struct shash_alg sha512_arm_algs[] = { {
-	.init			= sha384_base_init,
-	.update			= sha512_arm_update,
-	.final			= sha512_arm_final,
-	.finup			= sha512_arm_finup,
-	.descsize		= sizeof(struct sha512_state),
-	.digestsize		= SHA384_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha384",
-		.cra_driver_name	= "sha384-arm",
-		.cra_priority		= 250,
-		.cra_blocksize		= SHA512_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-},  {
-	.init			= sha512_base_init,
-	.update			= sha512_arm_update,
-	.final			= sha512_arm_final,
-	.finup			= sha512_arm_finup,
-	.descsize		= sizeof(struct sha512_state),
-	.digestsize		= SHA512_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha512",
-		.cra_driver_name	= "sha512-arm",
-		.cra_priority		= 250,
-		.cra_blocksize		= SHA512_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-} };
-
-static int __init sha512_arm_mod_init(void)
-{
-	int err;
-
-	err = crypto_register_shashes(sha512_arm_algs,
-				      ARRAY_SIZE(sha512_arm_algs));
-	if (err)
-		return err;
-
-	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && cpu_has_neon()) {
-		err = crypto_register_shashes(sha512_neon_algs,
-					      ARRAY_SIZE(sha512_neon_algs));
-		if (err)
-			goto err_unregister;
-	}
-	return 0;
-
-err_unregister:
-	crypto_unregister_shashes(sha512_arm_algs,
-				  ARRAY_SIZE(sha512_arm_algs));
-
-	return err;
-}
-
-static void __exit sha512_arm_mod_fini(void)
-{
-	crypto_unregister_shashes(sha512_arm_algs,
-				  ARRAY_SIZE(sha512_arm_algs));
-	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && cpu_has_neon())
-		crypto_unregister_shashes(sha512_neon_algs,
-					  ARRAY_SIZE(sha512_neon_algs));
-}
-
-module_init(sha512_arm_mod_init);
-module_exit(sha512_arm_mod_fini);
diff --git a/arch/arm/crypto/sha512-neon-glue.c b/arch/arm/crypto/sha512-neon-glue.c
deleted file mode 100644
index c879ad32db51..000000000000
--- a/arch/arm/crypto/sha512-neon-glue.c
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * sha512-neon-glue.c - accelerated SHA-384/512 for ARM NEON
- *
- * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <crypto/sha2.h>
-#include <crypto/sha512_base.h>
-#include <linux/crypto.h>
-#include <linux/module.h>
-
-#include <asm/simd.h>
-#include <asm/neon.h>
-
-#include "sha512.h"
-
-MODULE_ALIAS_CRYPTO("sha384-neon");
-MODULE_ALIAS_CRYPTO("sha512-neon");
-
-asmlinkage void sha512_block_data_order_neon(u64 *state, u8 const *src,
-					     int blocks);
-
-static int sha512_neon_update(struct shash_desc *desc, const u8 *data,
-			      unsigned int len)
-{
-	struct sha512_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable() ||
-	    (sctx->count[0] % SHA512_BLOCK_SIZE) + len < SHA512_BLOCK_SIZE)
-		return sha512_arm_update(desc, data, len);
-
-	kernel_neon_begin();
-	sha512_base_do_update(desc, data, len,
-		(sha512_block_fn *)sha512_block_data_order_neon);
-	kernel_neon_end();
-
-	return 0;
-}
-
-static int sha512_neon_finup(struct shash_desc *desc, const u8 *data,
-			     unsigned int len, u8 *out)
-{
-	if (!crypto_simd_usable())
-		return sha512_arm_finup(desc, data, len, out);
-
-	kernel_neon_begin();
-	if (len)
-		sha512_base_do_update(desc, data, len,
-			(sha512_block_fn *)sha512_block_data_order_neon);
-	sha512_base_do_finalize(desc,
-		(sha512_block_fn *)sha512_block_data_order_neon);
-	kernel_neon_end();
-
-	return sha512_base_finish(desc, out);
-}
-
-static int sha512_neon_final(struct shash_desc *desc, u8 *out)
-{
-	return sha512_neon_finup(desc, NULL, 0, out);
-}
-
-struct shash_alg sha512_neon_algs[] = { {
-	.init			= sha384_base_init,
-	.update			= sha512_neon_update,
-	.final			= sha512_neon_final,
-	.finup			= sha512_neon_finup,
-	.descsize		= sizeof(struct sha512_state),
-	.digestsize		= SHA384_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha384",
-		.cra_driver_name	= "sha384-neon",
-		.cra_priority		= 300,
-		.cra_blocksize		= SHA384_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-
-	}
-},  {
-	.init			= sha512_base_init,
-	.update			= sha512_neon_update,
-	.final			= sha512_neon_final,
-	.finup			= sha512_neon_finup,
-	.descsize		= sizeof(struct sha512_state),
-	.digestsize		= SHA512_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha512",
-		.cra_driver_name	= "sha512-neon",
-		.cra_priority		= 300,
-		.cra_blocksize		= SHA512_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-} };
diff --git a/arch/arm/crypto/sha512.h b/arch/arm/crypto/sha512.h
deleted file mode 100644
index e14572be76d1..000000000000
--- a/arch/arm/crypto/sha512.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-int sha512_arm_update(struct shash_desc *desc, const u8 *data,
-		      unsigned int len);
-
-int sha512_arm_finup(struct shash_desc *desc, const u8 *data,
-		     unsigned int len, u8 *out);
-
-extern struct shash_alg sha512_neon_algs[2];
diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h
index f82a819eb0db..311e83038bdb 100644
--- a/arch/arm/include/asm/arch_gicv3.h
+++ b/arch/arm/include/asm/arch_gicv3.h
@@ -252,5 +252,10 @@ static inline void gic_arch_enable_irqs(void)
 	WARN_ON_ONCE(true);
 }
 
+static inline bool gic_has_relaxed_pmr_sync(void)
+{
+	return false;
+}
+
 #endif /* !__ASSEMBLY__ */
 #endif /* !__ASM_ARCH_GICV3_H */
diff --git a/arch/arm/include/asm/arm_pmuv3.h b/arch/arm/include/asm/arm_pmuv3.h
new file mode 100644
index 000000000000..2ec0e5e83fc9
--- /dev/null
+++ b/arch/arm/include/asm/arm_pmuv3.h
@@ -0,0 +1,280 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#ifndef __ASM_PMUV3_H
+#define __ASM_PMUV3_H
+
+#include <asm/cp15.h>
+#include <asm/cputype.h>
+
+#define PMCCNTR			__ACCESS_CP15_64(0, c9)
+
+#define PMCR			__ACCESS_CP15(c9,  0, c12, 0)
+#define PMCNTENSET		__ACCESS_CP15(c9,  0, c12, 1)
+#define PMCNTENCLR		__ACCESS_CP15(c9,  0, c12, 2)
+#define PMOVSR			__ACCESS_CP15(c9,  0, c12, 3)
+#define PMSELR			__ACCESS_CP15(c9,  0, c12, 5)
+#define PMCEID0			__ACCESS_CP15(c9,  0, c12, 6)
+#define PMCEID1			__ACCESS_CP15(c9,  0, c12, 7)
+#define PMXEVTYPER		__ACCESS_CP15(c9,  0, c13, 1)
+#define PMXEVCNTR		__ACCESS_CP15(c9,  0, c13, 2)
+#define PMUSERENR		__ACCESS_CP15(c9,  0, c14, 0)
+#define PMINTENSET		__ACCESS_CP15(c9,  0, c14, 1)
+#define PMINTENCLR		__ACCESS_CP15(c9,  0, c14, 2)
+#define PMCEID2			__ACCESS_CP15(c9,  0, c14, 4)
+#define PMCEID3			__ACCESS_CP15(c9,  0, c14, 5)
+#define PMMIR			__ACCESS_CP15(c9,  0, c14, 6)
+#define PMCCFILTR		__ACCESS_CP15(c14, 0, c15, 7)
+
+#define PMEVCNTR0		__ACCESS_CP15(c14, 0, c8, 0)
+#define PMEVCNTR1		__ACCESS_CP15(c14, 0, c8, 1)
+#define PMEVCNTR2		__ACCESS_CP15(c14, 0, c8, 2)
+#define PMEVCNTR3		__ACCESS_CP15(c14, 0, c8, 3)
+#define PMEVCNTR4		__ACCESS_CP15(c14, 0, c8, 4)
+#define PMEVCNTR5		__ACCESS_CP15(c14, 0, c8, 5)
+#define PMEVCNTR6		__ACCESS_CP15(c14, 0, c8, 6)
+#define PMEVCNTR7		__ACCESS_CP15(c14, 0, c8, 7)
+#define PMEVCNTR8		__ACCESS_CP15(c14, 0, c9, 0)
+#define PMEVCNTR9		__ACCESS_CP15(c14, 0, c9, 1)
+#define PMEVCNTR10		__ACCESS_CP15(c14, 0, c9, 2)
+#define PMEVCNTR11		__ACCESS_CP15(c14, 0, c9, 3)
+#define PMEVCNTR12		__ACCESS_CP15(c14, 0, c9, 4)
+#define PMEVCNTR13		__ACCESS_CP15(c14, 0, c9, 5)
+#define PMEVCNTR14		__ACCESS_CP15(c14, 0, c9, 6)
+#define PMEVCNTR15		__ACCESS_CP15(c14, 0, c9, 7)
+#define PMEVCNTR16		__ACCESS_CP15(c14, 0, c10, 0)
+#define PMEVCNTR17		__ACCESS_CP15(c14, 0, c10, 1)
+#define PMEVCNTR18		__ACCESS_CP15(c14, 0, c10, 2)
+#define PMEVCNTR19		__ACCESS_CP15(c14, 0, c10, 3)
+#define PMEVCNTR20		__ACCESS_CP15(c14, 0, c10, 4)
+#define PMEVCNTR21		__ACCESS_CP15(c14, 0, c10, 5)
+#define PMEVCNTR22		__ACCESS_CP15(c14, 0, c10, 6)
+#define PMEVCNTR23		__ACCESS_CP15(c14, 0, c10, 7)
+#define PMEVCNTR24		__ACCESS_CP15(c14, 0, c11, 0)
+#define PMEVCNTR25		__ACCESS_CP15(c14, 0, c11, 1)
+#define PMEVCNTR26		__ACCESS_CP15(c14, 0, c11, 2)
+#define PMEVCNTR27		__ACCESS_CP15(c14, 0, c11, 3)
+#define PMEVCNTR28		__ACCESS_CP15(c14, 0, c11, 4)
+#define PMEVCNTR29		__ACCESS_CP15(c14, 0, c11, 5)
+#define PMEVCNTR30		__ACCESS_CP15(c14, 0, c11, 6)
+
+#define PMEVTYPER0		__ACCESS_CP15(c14, 0, c12, 0)
+#define PMEVTYPER1		__ACCESS_CP15(c14, 0, c12, 1)
+#define PMEVTYPER2		__ACCESS_CP15(c14, 0, c12, 2)
+#define PMEVTYPER3		__ACCESS_CP15(c14, 0, c12, 3)
+#define PMEVTYPER4		__ACCESS_CP15(c14, 0, c12, 4)
+#define PMEVTYPER5		__ACCESS_CP15(c14, 0, c12, 5)
+#define PMEVTYPER6		__ACCESS_CP15(c14, 0, c12, 6)
+#define PMEVTYPER7		__ACCESS_CP15(c14, 0, c12, 7)
+#define PMEVTYPER8		__ACCESS_CP15(c14, 0, c13, 0)
+#define PMEVTYPER9		__ACCESS_CP15(c14, 0, c13, 1)
+#define PMEVTYPER10		__ACCESS_CP15(c14, 0, c13, 2)
+#define PMEVTYPER11		__ACCESS_CP15(c14, 0, c13, 3)
+#define PMEVTYPER12		__ACCESS_CP15(c14, 0, c13, 4)
+#define PMEVTYPER13		__ACCESS_CP15(c14, 0, c13, 5)
+#define PMEVTYPER14		__ACCESS_CP15(c14, 0, c13, 6)
+#define PMEVTYPER15		__ACCESS_CP15(c14, 0, c13, 7)
+#define PMEVTYPER16		__ACCESS_CP15(c14, 0, c14, 0)
+#define PMEVTYPER17		__ACCESS_CP15(c14, 0, c14, 1)
+#define PMEVTYPER18		__ACCESS_CP15(c14, 0, c14, 2)
+#define PMEVTYPER19		__ACCESS_CP15(c14, 0, c14, 3)
+#define PMEVTYPER20		__ACCESS_CP15(c14, 0, c14, 4)
+#define PMEVTYPER21		__ACCESS_CP15(c14, 0, c14, 5)
+#define PMEVTYPER22		__ACCESS_CP15(c14, 0, c14, 6)
+#define PMEVTYPER23		__ACCESS_CP15(c14, 0, c14, 7)
+#define PMEVTYPER24		__ACCESS_CP15(c14, 0, c15, 0)
+#define PMEVTYPER25		__ACCESS_CP15(c14, 0, c15, 1)
+#define PMEVTYPER26		__ACCESS_CP15(c14, 0, c15, 2)
+#define PMEVTYPER27		__ACCESS_CP15(c14, 0, c15, 3)
+#define PMEVTYPER28		__ACCESS_CP15(c14, 0, c15, 4)
+#define PMEVTYPER29		__ACCESS_CP15(c14, 0, c15, 5)
+#define PMEVTYPER30		__ACCESS_CP15(c14, 0, c15, 6)
+
+#define RETURN_READ_PMEVCNTRN(n) \
+	return read_sysreg(PMEVCNTR##n)
+static inline unsigned long read_pmevcntrn(int n)
+{
+	PMEVN_SWITCH(n, RETURN_READ_PMEVCNTRN);
+	return 0;
+}
+
+#define WRITE_PMEVCNTRN(n) \
+	write_sysreg(val, PMEVCNTR##n)
+static inline void write_pmevcntrn(int n, unsigned long val)
+{
+	PMEVN_SWITCH(n, WRITE_PMEVCNTRN);
+}
+
+#define WRITE_PMEVTYPERN(n) \
+	write_sysreg(val, PMEVTYPER##n)
+static inline void write_pmevtypern(int n, unsigned long val)
+{
+	PMEVN_SWITCH(n, WRITE_PMEVTYPERN);
+}
+
+static inline unsigned long read_pmmir(void)
+{
+	return read_sysreg(PMMIR);
+}
+
+static inline u32 read_pmuver(void)
+{
+	/* PMUVers is not a signed field */
+	u32 dfr0 = read_cpuid_ext(CPUID_EXT_DFR0);
+
+	return (dfr0 >> 24) & 0xf;
+}
+
+static inline bool pmuv3_has_icntr(void)
+{
+	/* FEAT_PMUv3_ICNTR not accessible for 32-bit */
+	return false;
+}
+
+static inline void write_pmcr(u32 val)
+{
+	write_sysreg(val, PMCR);
+}
+
+static inline u32 read_pmcr(void)
+{
+	return read_sysreg(PMCR);
+}
+
+static inline void write_pmselr(u32 val)
+{
+	write_sysreg(val, PMSELR);
+}
+
+static inline void write_pmccntr(u64 val)
+{
+	write_sysreg(val, PMCCNTR);
+}
+
+static inline u64 read_pmccntr(void)
+{
+	return read_sysreg(PMCCNTR);
+}
+
+static inline void write_pmicntr(u64 val) {}
+
+static inline u64 read_pmicntr(void)
+{
+	return 0;
+}
+
+static inline void write_pmcntenset(u32 val)
+{
+	write_sysreg(val, PMCNTENSET);
+}
+
+static inline void write_pmcntenclr(u32 val)
+{
+	write_sysreg(val, PMCNTENCLR);
+}
+
+static inline void write_pmintenset(u32 val)
+{
+	write_sysreg(val, PMINTENSET);
+}
+
+static inline void write_pmintenclr(u32 val)
+{
+	write_sysreg(val, PMINTENCLR);
+}
+
+static inline void write_pmccfiltr(u32 val)
+{
+	write_sysreg(val, PMCCFILTR);
+}
+
+static inline void write_pmicfiltr(u64 val) {}
+
+static inline u64 read_pmicfiltr(void)
+{
+	return 0;
+}
+
+static inline void write_pmovsclr(u32 val)
+{
+	write_sysreg(val, PMOVSR);
+}
+
+static inline u32 read_pmovsclr(void)
+{
+	return read_sysreg(PMOVSR);
+}
+
+static inline void write_pmuserenr(u32 val)
+{
+	write_sysreg(val, PMUSERENR);
+}
+
+static inline void write_pmuacr(u64 val) {}
+
+static inline void kvm_set_pmu_events(u32 set, struct perf_event_attr *attr) {}
+static inline void kvm_clr_pmu_events(u32 clr) {}
+static inline bool kvm_pmu_counter_deferred(struct perf_event_attr *attr)
+{
+	return false;
+}
+
+static inline bool kvm_set_pmuserenr(u64 val)
+{
+	return false;
+}
+
+static inline void kvm_vcpu_pmu_resync_el0(void) {}
+
+/* PMU Version in DFR Register */
+#define ARMV8_PMU_DFR_VER_NI        0
+#define ARMV8_PMU_DFR_VER_V3P1      0x4
+#define ARMV8_PMU_DFR_VER_V3P4      0x5
+#define ARMV8_PMU_DFR_VER_V3P5      0x6
+#define ARMV8_PMU_DFR_VER_V3P9      0x9
+#define ARMV8_PMU_DFR_VER_IMP_DEF   0xF
+
+static inline bool pmuv3_implemented(int pmuver)
+{
+	return !(pmuver == ARMV8_PMU_DFR_VER_IMP_DEF ||
+		 pmuver == ARMV8_PMU_DFR_VER_NI);
+}
+
+static inline bool is_pmuv3p4(int pmuver)
+{
+	return pmuver >= ARMV8_PMU_DFR_VER_V3P4;
+}
+
+static inline bool is_pmuv3p5(int pmuver)
+{
+	return pmuver >= ARMV8_PMU_DFR_VER_V3P5;
+}
+
+static inline bool is_pmuv3p9(int pmuver)
+{
+	return pmuver >= ARMV8_PMU_DFR_VER_V3P9;
+}
+
+static inline u64 read_pmceid0(void)
+{
+	u64 val = read_sysreg(PMCEID0);
+
+	if (read_pmuver() >= ARMV8_PMU_DFR_VER_V3P1)
+		val |= (u64)read_sysreg(PMCEID2) << 32;
+
+	return val;
+}
+
+static inline u64 read_pmceid1(void)
+{
+	u64 val = read_sysreg(PMCEID1);
+
+	if (read_pmuver() >= ARMV8_PMU_DFR_VER_V3P1)
+		val |= (u64)read_sysreg(PMCEID3) << 32;
+
+	return val;
+}
+
+#endif
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 90fbe4a3f9c8..d33c1e24e00b 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -21,6 +21,7 @@
 #include <asm/opcodes-virt.h>
 #include <asm/asm-offsets.h>
 #include <asm/page.h>
+#include <asm/pgtable.h>
 #include <asm/thread_info.h>
 #include <asm/uaccess-asm.h>
 
@@ -236,20 +237,12 @@ THUMB(	fpreg	.req	r7	)
 	sub	\tmp, \tmp, #1			@ decrement it
 	str	\tmp, [\ti, #TI_PREEMPT]
 	.endm
-
-	.macro	dec_preempt_count_ti, ti, tmp
-	get_thread_info \ti
-	dec_preempt_count \ti, \tmp
-	.endm
 #else
 	.macro	inc_preempt_count, ti, tmp
 	.endm
 
 	.macro	dec_preempt_count, ti, tmp
 	.endm
-
-	.macro	dec_preempt_count_ti, ti, tmp
-	.endm
 #endif
 
 #define USERL(l, x...)				\
@@ -402,6 +395,23 @@ ALT_UP_B(.L0_\@)
 #endif
 	.endm
 
+/*
+ * Raw SMP data memory barrier
+ */
+	.macro	__smp_dmb mode
+#if __LINUX_ARM_ARCH__ >= 7
+	.ifeqs "\mode","arm"
+	dmb	ish
+	.else
+	W(dmb)	ish
+	.endif
+#elif __LINUX_ARM_ARCH__ == 6
+	mcr	p15, 0, r0, c7, c10, 5	@ dmb
+#else
+	.error "Incompatible SMP platform"
+#endif
+	.endm
+
 #if defined(CONFIG_CPU_V7M)
 	/*
 	 * setmode is used to assert to be in svc mode during boot. For v7-M
@@ -761,6 +771,12 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	.endif
 	.endm
 
+	.if		__LINUX_ARM_ARCH__ < 6
+	.set		.Lrev_l_uses_tmp, 1
+	.else
+	.set		.Lrev_l_uses_tmp, 0
+	.endif
+
 	/*
 	 * bl_r - branch and link to register
 	 *
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index db8512d9a918..f0e3b01afa74 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -197,6 +197,16 @@ static inline int arch_atomic_fetch_##op(int i, atomic_t *v)		\
 	return val;							\
 }
 
+#define arch_atomic_add_return			arch_atomic_add_return
+#define arch_atomic_sub_return			arch_atomic_sub_return
+#define arch_atomic_fetch_add			arch_atomic_fetch_add
+#define arch_atomic_fetch_sub			arch_atomic_fetch_sub
+
+#define arch_atomic_fetch_and			arch_atomic_fetch_and
+#define arch_atomic_fetch_andnot		arch_atomic_fetch_andnot
+#define arch_atomic_fetch_or			arch_atomic_fetch_or
+#define arch_atomic_fetch_xor			arch_atomic_fetch_xor
+
 static inline int arch_atomic_cmpxchg(atomic_t *v, int old, int new)
 {
 	int ret;
@@ -210,8 +220,7 @@ static inline int arch_atomic_cmpxchg(atomic_t *v, int old, int new)
 
 	return ret;
 }
-
-#define arch_atomic_fetch_andnot		arch_atomic_fetch_andnot
+#define arch_atomic_cmpxchg arch_atomic_cmpxchg
 
 #endif /* __LINUX_ARM_ARCH__ */
 
@@ -240,8 +249,6 @@ ATOMIC_OPS(xor, ^=, eor)
 #undef ATOMIC_OP_RETURN
 #undef ATOMIC_OP
 
-#define arch_atomic_xchg(v, new) (arch_xchg(&((v)->counter), new))
-
 #ifndef CONFIG_GENERIC_ATOMIC64
 typedef struct {
 	s64 counter;
diff --git a/arch/arm/include/asm/bugs.h b/arch/arm/include/asm/bugs.h
index 97a312ba0840..fe385551edec 100644
--- a/arch/arm/include/asm/bugs.h
+++ b/arch/arm/include/asm/bugs.h
@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- *  arch/arm/include/asm/bugs.h
- *
  *  Copyright (C) 1995-2003 Russell King
  */
 #ifndef __ASM_BUGS_H
@@ -10,10 +8,8 @@
 extern void check_writebuffer_bugs(void);
 
 #ifdef CONFIG_MMU
-extern void check_bugs(void);
 extern void check_other_bugs(void);
 #else
-#define check_bugs() do { } while (0)
 #define check_other_bugs() do { } while (0)
 #endif
 
diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
index e3ea34558ada..ecbc100d22a5 100644
--- a/arch/arm/include/asm/cache.h
+++ b/arch/arm/include/asm/cache.h
@@ -26,4 +26,10 @@
 
 #define __read_mostly __section(".data..read_mostly")
 
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_ARCH_HAS_CACHE_LINE_SIZE
+int cache_line_size(void);
+#endif
+#endif
+
 #endif
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index a094f964c869..8ed8b9a24efe 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -231,14 +231,15 @@ vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned
 					vma->vm_flags);
 }
 
-static inline void
-vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
+static inline void vivt_flush_cache_pages(struct vm_area_struct *vma,
+		unsigned long user_addr, unsigned long pfn, unsigned int nr)
 {
 	struct mm_struct *mm = vma->vm_mm;
 
 	if (!mm || cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) {
 		unsigned long addr = user_addr & PAGE_MASK;
-		__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
+		__cpuc_flush_user_range(addr, addr + nr * PAGE_SIZE,
+				vma->vm_flags);
 	}
 }
 
@@ -247,15 +248,17 @@ vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig
 		vivt_flush_cache_mm(mm)
 #define flush_cache_range(vma,start,end) \
 		vivt_flush_cache_range(vma,start,end)
-#define flush_cache_page(vma,addr,pfn) \
-		vivt_flush_cache_page(vma,addr,pfn)
+#define flush_cache_pages(vma, addr, pfn, nr) \
+		vivt_flush_cache_pages(vma, addr, pfn, nr)
 #else
-extern void flush_cache_mm(struct mm_struct *mm);
-extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
-extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
+void flush_cache_mm(struct mm_struct *mm);
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
+void flush_cache_pages(struct vm_area_struct *vma, unsigned long user_addr,
+		unsigned long pfn, unsigned int nr);
 #endif
 
 #define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+#define flush_cache_page(vma, addr, pfn) flush_cache_pages(vma, addr, pfn, 1)
 
 /*
  * flush_icache_user_range is used when we want to ensure that the
@@ -280,7 +283,7 @@ extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr
  * flush_dcache_page is used when the kernel has written to the page
  * cache page at virtual address page->virtual.
  *
- * If this page isn't mapped (ie, page_mapping == NULL), or it might
+ * If this page isn't mapped (ie, folio_mapping == NULL), or it might
  * have userspace mappings, then we _must_ always clean + invalidate
  * the dcache entries associated with the kernel mapping.
  *
@@ -289,7 +292,9 @@ extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr
  * See update_mmu_cache for the user space part.
  */
 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
-extern void flush_dcache_page(struct page *);
+void flush_dcache_page(struct page *);
+void flush_dcache_folio(struct folio *folio);
+#define flush_dcache_folio flush_dcache_folio
 
 #define ARCH_IMPLEMENTS_FLUSH_KERNEL_VMAP_RANGE 1
 static inline void flush_kernel_vmap_range(void *addr, int size)
@@ -317,12 +322,6 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
 #define flush_dcache_mmap_unlock(mapping)	xa_unlock_irq(&mapping->i_pages)
 
 /*
- * We don't appear to need to do anything here.  In fact, if we did, we'd
- * duplicate cache flushing elsewhere performed by flush_dcache_page().
- */
-#define flush_icache_page(vma,page)	do { } while (0)
-
-/*
  * flush_cache_vmap() is used when creating mappings (eg, via vmap,
  * vmalloc, ioremap etc) in kernel space for pages.  On non-VIPT
  * caches, since the direct-mappings of these pages may contain cached
@@ -341,6 +340,8 @@ static inline void flush_cache_vmap(unsigned long start, unsigned long end)
 		dsb(ishst);
 }
 
+#define flush_cache_vmap_early(start, end)	do { } while (0)
+
 static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
 {
 	if (!cache_is_vipt_nonaliasing())
diff --git a/arch/arm/include/asm/cachetype.h b/arch/arm/include/asm/cachetype.h
index e8c30430be33..b01c59076b84 100644
--- a/arch/arm/include/asm/cachetype.h
+++ b/arch/arm/include/asm/cachetype.h
@@ -20,6 +20,8 @@ extern unsigned int cacheid;
 #define icache_is_vipt_aliasing()	cacheid_is(CACHEID_VIPT_I_ALIASING)
 #define icache_is_pipt()		cacheid_is(CACHEID_PIPT)
 
+#define cpu_dcache_is_aliasing()	(cache_is_vivt() || cache_is_vipt_aliasing())
+
 /*
  * __LINUX_ARM_ARCH__ is the minimum supported CPU architecture
  * Mask out support which will never be present on newer CPUs.
@@ -81,6 +83,14 @@ static inline unsigned int read_ccsidr(void)
 	asm volatile("mrc p15, 1, %0, c0, c0, 0" : "=r" (val));
 	return val;
 }
+
+static inline unsigned int read_clidr(void)
+{
+	unsigned int val;
+
+	asm volatile("mrc p15, 1, %0, c0, c0, 1" : "=r" (val));
+	return val;
+}
 #else /* CONFIG_CPU_V7M */
 #include <linux/io.h>
 #include "asm/v7m.h"
@@ -94,6 +104,11 @@ static inline unsigned int read_ccsidr(void)
 {
 	return readl(BASEADDR_V7M_SCB + V7M_SCB_CCSIDR);
 }
+
+static inline unsigned int read_clidr(void)
+{
+	return readl(BASEADDR_V7M_SCB + V7M_SCB_CLIDR);
+}
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/checksum.h b/arch/arm/include/asm/checksum.h
index f0f54aef3724..d8a13959bff0 100644
--- a/arch/arm/include/asm/checksum.h
+++ b/arch/arm/include/asm/checksum.h
@@ -11,6 +11,7 @@
 #define __ASM_ARM_CHECKSUM_H
 
 #include <linux/in6.h>
+#include <linux/uaccess.h>
 
 /*
  * computes the checksum of a memory block at buff, length len,
diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h
index 4dfe538dfc68..9beb64d30586 100644
--- a/arch/arm/include/asm/cmpxchg.h
+++ b/arch/arm/include/asm/cmpxchg.h
@@ -5,6 +5,7 @@
 #include <linux/irqflags.h>
 #include <linux/prefetch.h>
 #include <asm/barrier.h>
+#include <linux/cmpxchg-emu.h>
 
 #if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110)
 /*
@@ -25,7 +26,8 @@
 #define swp_is_buggy
 #endif
 
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
+static inline unsigned long
+__arch_xchg(unsigned long x, volatile void *ptr, int size)
 {
 	extern void __bad_xchg(volatile void *, int);
 	unsigned long ret;
@@ -115,8 +117,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 }
 
 #define arch_xchg_relaxed(ptr, x) ({					\
-	(__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr),		\
-				   sizeof(*(ptr)));			\
+	(__typeof__(*(ptr)))__arch_xchg((unsigned long)(x), (ptr),	\
+					sizeof(*(ptr)));		\
 })
 
 #include <asm-generic/cmpxchg-local.h>
@@ -161,7 +163,11 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
 	prefetchw((const void *)ptr);
 
 	switch (size) {
-#ifndef CONFIG_CPU_V6	/* min ARCH >= ARMv6K */
+#ifdef CONFIG_CPU_V6	/* ARCH == ARMv6 */
+	case 1:
+		oldval = cmpxchg_emu_u8((volatile u8 *)ptr, old, new);
+		break;
+#else /* min ARCH > ARMv6 */
 	case 1:
 		do {
 			asm volatile("@ __cmpxchg1\n"
diff --git a/arch/arm/include/asm/cpu.h b/arch/arm/include/asm/cpu.h
index bd6fdb4b922d..9d8863537aa5 100644
--- a/arch/arm/include/asm/cpu.h
+++ b/arch/arm/include/asm/cpu.h
@@ -11,7 +11,6 @@
 #include <linux/cpu.h>
 
 struct cpuinfo_arm {
-	struct cpu	cpu;
 	u32		cpuid;
 #ifdef CONFIG_SMP
 	unsigned int	loops_per_jiffy;
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 775cac3c02bb..0163c3e78a67 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -25,6 +25,8 @@
 #define CPUID_EXT_ISAR3	0x6c
 #define CPUID_EXT_ISAR4	0x70
 #define CPUID_EXT_ISAR5	0x74
+#define CPUID_EXT_ISAR6	0x7c
+#define CPUID_EXT_PFR2	0x90
 #else
 #define CPUID_EXT_PFR0	"c1, 0"
 #define CPUID_EXT_PFR1	"c1, 1"
@@ -40,6 +42,8 @@
 #define CPUID_EXT_ISAR3	"c2, 3"
 #define CPUID_EXT_ISAR4	"c2, 4"
 #define CPUID_EXT_ISAR5	"c2, 5"
+#define CPUID_EXT_ISAR6	"c2, 7"
+#define CPUID_EXT_PFR2	"c3, 4"
 #endif
 
 #define MPIDR_SMP_BITMASK (0x3 << 30)
diff --git a/arch/arm/include/asm/cti.h b/arch/arm/include/asm/cti.h
deleted file mode 100644
index f8500e5d6ea8..000000000000
--- a/arch/arm/include/asm/cti.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASMARM_CTI_H
-#define __ASMARM_CTI_H
-
-#include	<asm/io.h>
-#include	<asm/hardware/coresight.h>
-
-/* The registers' definition is from section 3.2 of
- * Embedded Cross Trigger Revision: r0p0
- */
-#define		CTICONTROL		0x000
-#define		CTISTATUS		0x004
-#define		CTILOCK			0x008
-#define		CTIPROTECTION		0x00C
-#define		CTIINTACK		0x010
-#define		CTIAPPSET		0x014
-#define		CTIAPPCLEAR		0x018
-#define		CTIAPPPULSE		0x01c
-#define		CTIINEN			0x020
-#define		CTIOUTEN		0x0A0
-#define		CTITRIGINSTATUS		0x130
-#define		CTITRIGOUTSTATUS	0x134
-#define		CTICHINSTATUS		0x138
-#define		CTICHOUTSTATUS		0x13c
-#define		CTIPERIPHID0		0xFE0
-#define		CTIPERIPHID1		0xFE4
-#define		CTIPERIPHID2		0xFE8
-#define		CTIPERIPHID3		0xFEC
-#define		CTIPCELLID0		0xFF0
-#define		CTIPCELLID1		0xFF4
-#define		CTIPCELLID2		0xFF8
-#define		CTIPCELLID3		0xFFC
-
-/* The below are from section 3.6.4 of
- * CoreSight v1.0 Architecture Specification
- */
-#define		LOCKACCESS		0xFB0
-#define		LOCKSTATUS		0xFB4
-
-/**
- * struct cti - cross trigger interface struct
- * @base: mapped virtual address for the cti base
- * @irq: irq number for the cti
- * @trig_out_for_irq: triger out number which will cause
- *	the @irq happen
- *
- * cti struct used to operate cti registers.
- */
-struct cti {
-	void __iomem *base;
-	int irq;
-	int trig_out_for_irq;
-};
-
-/**
- * cti_init - initialize the cti instance
- * @cti: cti instance
- * @base: mapped virtual address for the cti base
- * @irq: irq number for the cti
- * @trig_out: triger out number which will cause
- *	the @irq happen
- *
- * called by machine code to pass the board dependent
- * @base, @irq and @trig_out to cti.
- */
-static inline void cti_init(struct cti *cti,
-	void __iomem *base, int irq, int trig_out)
-{
-	cti->base = base;
-	cti->irq  = irq;
-	cti->trig_out_for_irq = trig_out;
-}
-
-/**
- * cti_map_trigger - use the @chan to map @trig_in to @trig_out
- * @cti: cti instance
- * @trig_in: trigger in number
- * @trig_out: trigger out number
- * @channel: channel number
- *
- * This function maps one trigger in of @trig_in to one trigger
- * out of @trig_out using the channel @chan.
- */
-static inline void cti_map_trigger(struct cti *cti,
-	int trig_in, int trig_out, int chan)
-{
-	void __iomem *base = cti->base;
-	unsigned long val;
-
-	val = __raw_readl(base + CTIINEN + trig_in * 4);
-	val |= BIT(chan);
-	__raw_writel(val, base + CTIINEN + trig_in * 4);
-
-	val = __raw_readl(base + CTIOUTEN + trig_out * 4);
-	val |= BIT(chan);
-	__raw_writel(val, base + CTIOUTEN + trig_out * 4);
-}
-
-/**
- * cti_enable - enable the cti module
- * @cti: cti instance
- *
- * enable the cti module
- */
-static inline void cti_enable(struct cti *cti)
-{
-	__raw_writel(0x1, cti->base + CTICONTROL);
-}
-
-/**
- * cti_disable - disable the cti module
- * @cti: cti instance
- *
- * enable the cti module
- */
-static inline void cti_disable(struct cti *cti)
-{
-	__raw_writel(0, cti->base + CTICONTROL);
-}
-
-/**
- * cti_irq_ack - clear the cti irq
- * @cti: cti instance
- *
- * clear the cti irq
- */
-static inline void cti_irq_ack(struct cti *cti)
-{
-	void __iomem *base = cti->base;
-	unsigned long val;
-
-	val = __raw_readl(base + CTIINTACK);
-	val |= BIT(cti->trig_out_for_irq);
-	__raw_writel(val, base + CTIINTACK);
-}
-
-/**
- * cti_unlock - unlock cti module
- * @cti: cti instance
- *
- * unlock the cti module, or else any writes to the cti
- * module is not allowed.
- */
-static inline void cti_unlock(struct cti *cti)
-{
-	__raw_writel(CS_LAR_KEY, cti->base + LOCKACCESS);
-}
-
-/**
- * cti_lock - lock cti module
- * @cti: cti instance
- *
- * lock the cti module, so any writes to the cti
- * module will be not allowed.
- */
-static inline void cti_lock(struct cti *cti)
-{
-	__raw_writel(~CS_LAR_KEY, cti->base + LOCKACCESS);
-}
-#endif
diff --git a/arch/arm/include/asm/current.h b/arch/arm/include/asm/current.h
index 1e1178bf176d..5225cb1c803b 100644
--- a/arch/arm/include/asm/current.h
+++ b/arch/arm/include/asm/current.h
@@ -18,18 +18,12 @@ static __always_inline __attribute_const__ struct task_struct *get_current(void)
 {
 	struct task_struct *cur;
 
-#if __has_builtin(__builtin_thread_pointer) && \
-    defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) && \
-    !(defined(CONFIG_THUMB2_KERNEL) && \
-      defined(CONFIG_CC_IS_CLANG) && CONFIG_CLANG_VERSION < 130001)
+#if __has_builtin(__builtin_thread_pointer) && defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO)
 	/*
 	 * Use the __builtin helper when available - this results in better
 	 * code, especially when using GCC in combination with the per-task
 	 * stack protector, as the compiler will recognize that it needs to
 	 * load the TLS register only once in every function.
-	 *
-	 * Clang < 13.0.1 gets this wrong for Thumb2 builds:
-	 * https://github.com/ClangBuiltLinux/linux/issues/1485
 	 */
 	cur = __builtin_thread_pointer();
 #elif defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h
index 4f80b72372b4..1d069e558d8d 100644
--- a/arch/arm/include/asm/delay.h
+++ b/arch/arm/include/asm/delay.h
@@ -7,7 +7,7 @@
 #ifndef __ASM_ARM_DELAY_H
 #define __ASM_ARM_DELAY_H
 
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/param.h>	/* HZ */
 
 /*
diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h
index 8754c0f5fc90..c6beb1708c64 100644
--- a/arch/arm/include/asm/device.h
+++ b/arch/arm/include/asm/device.h
@@ -9,7 +9,6 @@ struct dev_archdata {
 #ifdef CONFIG_ARM_DMA_USE_IOMMU
 	struct dma_iommu_mapping	*mapping;
 #endif
-	unsigned int dma_coherent:1;
 	unsigned int dma_ops_setup:1;
 };
 
diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h
index 4b69cf850451..d3ef8e416b27 100644
--- a/arch/arm/include/asm/div64.h
+++ b/arch/arm/include/asm/div64.h
@@ -52,10 +52,17 @@ static inline uint32_t __div64_32(uint64_t *n, uint32_t base)
 
 #else
 
-static inline uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias)
+#ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE
+static __always_inline
+#else
+static inline
+#endif
+uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias)
 {
 	unsigned long long res;
 	register unsigned int tmp asm("ip") = 0;
+	bool no_ovf = __builtin_constant_p(m) &&
+		      ((m >> 32) + (m & 0xffffffff) < 0x100000000);
 
 	if (!bias) {
 		asm (	"umull	%Q0, %R0, %Q1, %Q2\n\t"
@@ -63,7 +70,7 @@ static inline uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias)
 			: "=&r" (res)
 			: "r" (m), "r" (n)
 			: "cc");
-	} else if (!(m & ((1ULL << 63) | (1ULL << 31)))) {
+	} else if (no_ovf) {
 		res = m;
 		asm (	"umlal	%Q0, %R0, %Q1, %Q2\n\t"
 			"mov	%Q0, #0"
@@ -80,7 +87,7 @@ static inline uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias)
 			: "cc");
 	}
 
-	if (!(m & ((1ULL << 63) | (1ULL << 31)))) {
+	if (no_ovf) {
 		asm (	"umlal	%R0, %Q0, %R1, %Q2\n\t"
 			"umlal	%R0, %Q0, %Q1, %R2\n\t"
 			"mov	%R0, #0\n\t"
diff --git a/arch/arm/include/asm/dma-direct.h b/arch/arm/include/asm/dma-direct.h
deleted file mode 100644
index 4f7bcde03abb..000000000000
--- a/arch/arm/include/asm/dma-direct.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <mach/dma-direct.h>
diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h
index fe9ef6f79e9c..2ce4c5683e6d 100644
--- a/arch/arm/include/asm/dma-iommu.h
+++ b/arch/arm/include/asm/dma-iommu.h
@@ -24,7 +24,7 @@ struct dma_iommu_mapping {
 };
 
 struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size);
+arm_iommu_create_mapping(struct device *dev, dma_addr_t base, u64 size);
 
 void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping);
 
diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index 05f29a72150b..e2a1916013e7 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -12,6 +12,9 @@
 	extern phys_addr_t arm_dma_zone_size; \
 	arm_dma_zone_size && arm_dma_zone_size < (0x100000000ULL - PAGE_OFFSET) ? \
 		(PAGE_OFFSET + arm_dma_zone_size) : 0xffffffffUL; })
+
+extern phys_addr_t arm_dma_limit;
+#define ARCH_LOW_ADDRESS_LIMIT arm_dma_limit
 #endif
 
 #ifdef CONFIG_ISA_DMA_API
@@ -106,7 +109,7 @@ extern void set_dma_sg(unsigned int chan, struct scatterlist *sg, int nr_sg);
  */
 extern void __set_dma_addr(unsigned int chan, void *addr);
 #define set_dma_addr(chan, addr)				\
-	__set_dma_addr(chan, (void *)__bus_to_virt(addr))
+	__set_dma_addr(chan, (void *)isa_bus_to_virt(addr))
 
 /* Set the DMA byte count for this channel
  *
diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h
index 41536feb4392..d48859fdf32c 100644
--- a/arch/arm/include/asm/domain.h
+++ b/arch/arm/include/asm/domain.h
@@ -8,8 +8,8 @@
 #define __ASM_PROC_DOMAIN_H
 
 #ifndef __ASSEMBLY__
+#include <linux/thread_info.h>
 #include <asm/barrier.h>
-#include <asm/thread_info.h>
 #endif
 
 /*
diff --git a/arch/arm/include/asm/ecard.h b/arch/arm/include/asm/ecard.h
index 4befe8d2ae19..7cbe001bf9cc 100644
--- a/arch/arm/include/asm/ecard.h
+++ b/arch/arm/include/asm/ecard.h
@@ -195,7 +195,7 @@ void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
 			   unsigned long offset, unsigned long maxsize);
 #define ecardm_iounmap(__ec, __addr)	devm_iounmap(&(__ec)->dev, __addr)
 
-extern struct bus_type ecard_bus_type;
+extern const struct bus_type ecard_bus_type;
 
 #define ECARD_DEV(_d)	container_of((_d), struct expansion_card, dev)
 
diff --git a/arch/arm/include/asm/efi.h b/arch/arm/include/asm/efi.h
index 3088ef72704e..e408399d5f0e 100644
--- a/arch/arm/include/asm/efi.h
+++ b/arch/arm/include/asm/efi.h
@@ -14,16 +14,30 @@
 #include <asm/mach/map.h>
 #include <asm/mmu_context.h>
 #include <asm/ptrace.h>
+#include <asm/uaccess.h>
 
 #ifdef CONFIG_EFI
 void efi_init(void);
+void arm_efi_init(void);
 
 int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md);
-int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);
+int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md, bool);
 
 #define arch_efi_call_virt_setup()	efi_virtmap_load()
 #define arch_efi_call_virt_teardown()	efi_virtmap_unload()
 
+#ifdef CONFIG_CPU_TTBR0_PAN
+#undef arch_efi_call_virt
+#define arch_efi_call_virt(p, f, args...) ({				\
+	unsigned int flags = uaccess_save_and_enable();			\
+	efi_status_t res = _Generic((p)->f(args),			\
+			efi_status_t:	(p)->f(args),			\
+			default:	((p)->f(args), EFI_ABORTED));	\
+	uaccess_restore(flags);						\
+	res;								\
+})
+#endif
+
 #define ARCH_EFI_IRQ_FLAGS_MASK \
 	(PSR_J_BIT | PSR_E_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT | \
 	 PSR_T_BIT | MODE_MASK)
@@ -37,14 +51,11 @@ void efi_virtmap_load(void);
 void efi_virtmap_unload(void);
 
 #else
-#define efi_init()
+#define arm_efi_init()
 #endif /* CONFIG_EFI */
 
 /* arch specific definitions used by the stub code */
 
-struct screen_info *alloc_screen_info(void);
-void free_screen_info(struct screen_info *si);
-
 /*
  * A reasonable upper bound for the uncompressed kernel size is 32 MBytes,
  * so we will reserve that amount of memory. We have no easy way to tell what
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index d68101655b74..9f21e170320f 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -4,7 +4,6 @@
 
 #include <asm/auxvec.h>
 #include <asm/hwcap.h>
-#include <asm/vdso_datapage.h>
 
 /*
  * ELF register definitions..
diff --git a/arch/arm/include/asm/exception.h b/arch/arm/include/asm/exception.h
index 58e039a851af..3c82975d46db 100644
--- a/arch/arm/include/asm/exception.h
+++ b/arch/arm/include/asm/exception.h
@@ -10,10 +10,6 @@
 
 #include <linux/interrupt.h>
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
 #define __exception_irq_entry	__irq_entry
-#else
-#define __exception_irq_entry
-#endif
 
 #endif /* __ASM_ARM_EXCEPTION_H */
diff --git a/arch/arm/include/asm/fb.h b/arch/arm/include/asm/fb.h
deleted file mode 100644
index d92e99cd8c8a..000000000000
--- a/arch/arm/include/asm/fb.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
-				unsigned long off)
-{
-	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-}
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h
index e1cb04ed5008..e579f77162e9 100644
--- a/arch/arm/include/asm/floppy.h
+++ b/arch/arm/include/asm/floppy.h
@@ -65,8 +65,6 @@ static unsigned char floppy_selects[4] = { 0x10, 0x21, 0x23, 0x33 };
 #define N_FDC 1
 #define N_DRIVE 4
 
-#define CROSS_64KB(a,s) (0)
-
 /*
  * This allows people to reverse the order of
  * fd0 and fd1, in case their hardware is
diff --git a/arch/arm/include/asm/fpstate.h b/arch/arm/include/asm/fpstate.h
index ca42fd9ae0b3..e29d9c7a5238 100644
--- a/arch/arm/include/asm/fpstate.h
+++ b/arch/arm/include/asm/fpstate.h
@@ -46,9 +46,6 @@ union vfp_state {
 	struct vfp_hard_struct	hard;
 };
 
-extern void vfp_flush_thread(union vfp_state *);
-extern void vfp_release_thread(union vfp_state *);
-
 #define FP_HARD_SIZE 35
 
 struct fp_hard_struct {
diff --git a/arch/arm/include/asm/fpu.h b/arch/arm/include/asm/fpu.h
new file mode 100644
index 000000000000..2ae50bdce59b
--- /dev/null
+++ b/arch/arm/include/asm/fpu.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2023 SiFive
+ */
+
+#ifndef __ASM_FPU_H
+#define __ASM_FPU_H
+
+#include <asm/neon.h>
+
+#define kernel_fpu_available()	cpu_has_neon()
+#define kernel_fpu_begin()	kernel_neon_begin()
+#define kernel_fpu_end()	kernel_neon_end()
+
+#endif /* ! __ASM_FPU_H */
diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index 7e9251ca29fe..5be3ddc96a50 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -75,6 +75,10 @@ static inline bool arch_syscall_match_sym_name(const char *sym,
 	return !strcasecmp(sym, name);
 }
 
+void prepare_ftrace_return(unsigned long *parent, unsigned long self,
+			   unsigned long frame_pointer,
+			   unsigned long stack_pointer);
+
 #endif /* ifndef __ASSEMBLY__ */
 
 #endif /* _ASM_ARM_FTRACE */
diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h
index 724f8dac1e5b..4186fbf7341f 100644
--- a/arch/arm/include/asm/glue-cache.h
+++ b/arch/arm/include/asm/glue-cache.h
@@ -118,6 +118,10 @@
 # define MULTI_CACHE 1
 #endif
 
+#ifdef CONFIG_CPU_CACHE_NOP
+#  define MULTI_CACHE 1
+#endif
+
 #if defined(CONFIG_CPU_V7M)
 #  define MULTI_CACHE 1
 #endif
@@ -126,29 +130,15 @@
 #error Unknown cache maintenance model
 #endif
 
-#ifndef __ASSEMBLER__
-static inline void nop_flush_icache_all(void) { }
-static inline void nop_flush_kern_cache_all(void) { }
-static inline void nop_flush_kern_cache_louis(void) { }
-static inline void nop_flush_user_cache_all(void) { }
-static inline void nop_flush_user_cache_range(unsigned long a,
-		unsigned long b, unsigned int c) { }
-
-static inline void nop_coherent_kern_range(unsigned long a, unsigned long b) { }
-static inline int nop_coherent_user_range(unsigned long a,
-		unsigned long b) { return 0; }
-static inline void nop_flush_kern_dcache_area(void *a, size_t s) { }
-
-static inline void nop_dma_flush_range(const void *a, const void *b) { }
-
-static inline void nop_dma_map_area(const void *s, size_t l, int f) { }
-static inline void nop_dma_unmap_area(const void *s, size_t l, int f) { }
-#endif
-
 #ifndef MULTI_CACHE
 #define __cpuc_flush_icache_all		__glue(_CACHE,_flush_icache_all)
 #define __cpuc_flush_kern_all		__glue(_CACHE,_flush_kern_cache_all)
+/* This function only has a dedicated assembly callback on the v7 cache */
+#ifdef CONFIG_CPU_CACHE_V7
 #define __cpuc_flush_kern_louis		__glue(_CACHE,_flush_kern_cache_louis)
+#else
+#define __cpuc_flush_kern_louis		__glue(_CACHE,_flush_kern_cache_all)
+#endif
 #define __cpuc_flush_user_all		__glue(_CACHE,_flush_user_cache_all)
 #define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
 #define __cpuc_coherent_kern_range	__glue(_CACHE,_coherent_kern_range)
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
deleted file mode 100644
index f3bb8a2bf788..000000000000
--- a/arch/arm/include/asm/gpio.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ARCH_ARM_GPIO_H
-#define _ARCH_ARM_GPIO_H
-
-/* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */
-#include <asm-generic/gpio.h>
-
-/* The trivial gpiolib dispatchers */
-#define gpio_get_value  __gpio_get_value
-#define gpio_set_value  __gpio_set_value
-#define gpio_cansleep   __gpio_cansleep
-
-/*
- * Provide a default gpio_to_irq() which should satisfy every case.
- * However, some platforms want to do this differently, so allow them
- * to override it.
- */
-#ifndef gpio_to_irq
-#define gpio_to_irq	__gpio_to_irq
-#endif
-
-#endif /* _ARCH_ARM_GPIO_H */
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index a6d4ee86ba54..5a7ee70f561c 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -9,6 +9,8 @@
 #define __ASM_ARM_HARDWARE_L2X0_H
 
 #include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/types.h>
 
 #define L2X0_CACHE_ID			0x000
 #define L2X0_CACHE_TYPE			0x004
diff --git a/arch/arm/include/asm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h
index 3f18a56a025d..894f2a635cbb 100644
--- a/arch/arm/include/asm/hardware/dec21285.h
+++ b/arch/arm/include/asm/hardware/dec21285.h
@@ -22,6 +22,13 @@
 #define DC21285_IO(x)		(x)
 #endif
 
+/*
+ * The footbridge is programmed to expose the system RAM at 0xe0000000.
+ * The requirement is that the RAM isn't placed at bus address 0, which
+ * would clash with VGA cards.
+ */
+#define BUS_OFFSET 0xe0000000
+
 #define CSR_PCICMD		DC21285_IO(0x0004)
 #define CSR_CLASSREV		DC21285_IO(0x0008)
 #define CSR_PCICACHELINESIZE	DC21285_IO(0x000c)
@@ -81,19 +88,6 @@
 #define SA110_CNTL_XCSDIR(x)		((x)<<28)
 #define SA110_CNTL_PCICFN		(1 << 31)
 
-/*
- * footbridge_cfn_mode() is used when we want
- * to check whether we are the central function
- */
-#define __footbridge_cfn_mode() (*CSR_SA110_CNTL & SA110_CNTL_PCICFN)
-#if defined(CONFIG_FOOTBRIDGE_HOST) && defined(CONFIG_FOOTBRIDGE_ADDIN)
-#define footbridge_cfn_mode() __footbridge_cfn_mode()
-#elif defined(CONFIG_FOOTBRIDGE_HOST)
-#define footbridge_cfn_mode() (1)
-#else
-#define footbridge_cfn_mode() (0)
-#endif
-
 #define CSR_PCIADDR_EXTN	DC21285_IO(0x0140)
 #define CSR_PREFETCHMEMRANGE	DC21285_IO(0x0144)
 #define CSR_XBUS_CYCLE		DC21285_IO(0x0148)
diff --git a/arch/arm/include/asm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h
index 246a3de25931..3190e1e5067a 100644
--- a/arch/arm/include/asm/hardware/locomo.h
+++ b/arch/arm/include/asm/hardware/locomo.h
@@ -158,8 +158,6 @@
 #define LOCOMO_LPT_TOH(TOH)	((TOH & 0x7) << 4)
 #define LOCOMO_LPT_TOL(TOL)	((TOL & 0x7))
 
-extern struct bus_type locomo_bus_type;
-
 #define LOCOMO_DEVID_KEYBOARD	0
 #define LOCOMO_DEVID_FRONTLIGHT	1
 #define LOCOMO_DEVID_BACKLIGHT	2
@@ -191,11 +189,11 @@ struct locomo_driver {
 	void (*remove)(struct locomo_dev *);
 };
 
-#define LOCOMO_DRV(_d)	container_of((_d), struct locomo_driver, drv)
+#define LOCOMO_DRV(_d)	container_of_const((_d), struct locomo_driver, drv)
 
 #define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name)
 
-void locomo_lcd_power(struct locomo_dev *, int, unsigned int);
+extern void locomolcd_power(int on);
 
 int locomo_driver_register(struct locomo_driver *);
 void locomo_driver_unregister(struct locomo_driver *);
diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index d8c6f8a99dfa..a815f39b4243 100644
--- a/arch/arm/include/asm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -404,7 +404,7 @@ struct sa1111_driver {
 	void (*remove)(struct sa1111_dev *);
 };
 
-#define SA1111_DRV(_d)	container_of((_d), struct sa1111_driver, drv)
+#define SA1111_DRV(_d)	container_of_const((_d), struct sa1111_driver, drv)
 
 #define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name)
 
diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
index b4b66220952d..bdb209e002a4 100644
--- a/arch/arm/include/asm/highmem.h
+++ b/arch/arm/include/asm/highmem.h
@@ -46,9 +46,9 @@ extern pte_t *pkmap_page_table;
 #endif
 
 #ifdef ARCH_NEEDS_KMAP_HIGH_GET
-extern void *kmap_high_get(struct page *page);
+extern void *kmap_high_get(const struct page *page);
 
-static inline void *arch_kmap_local_high_get(struct page *page)
+static inline void *arch_kmap_local_high_get(const struct page *page)
 {
 	if (IS_ENABLED(CONFIG_DEBUG_HIGHMEM) && !cache_is_vivt())
 		return NULL;
@@ -57,7 +57,7 @@ static inline void *arch_kmap_local_high_get(struct page *page)
 #define arch_kmap_local_high_get arch_kmap_local_high_get
 
 #else /* ARCH_NEEDS_KMAP_HIGH_GET */
-static inline void *kmap_high_get(struct page *page)
+static inline void *kmap_high_get(const struct page *page)
 {
 	return NULL;
 }
diff --git a/arch/arm/include/asm/hugetlb-3level.h b/arch/arm/include/asm/hugetlb-3level.h
index a30be5505793..87d48e2d90ad 100644
--- a/arch/arm/include/asm/hugetlb-3level.h
+++ b/arch/arm/include/asm/hugetlb-3level.h
@@ -13,12 +13,12 @@
 
 /*
  * If our huge pte is non-zero then mark the valid bit.
- * This allows pte_present(huge_ptep_get(ptep)) to return true for non-zero
+ * This allows pte_present(huge_ptep_get(mm,addr,ptep)) to return true for non-zero
  * ptes.
  * (The valid bit is automatically cleared by set_pte_at for PROT_NONE ptes).
  */
 #define __HAVE_ARCH_HUGE_PTEP_GET
-static inline pte_t huge_ptep_get(pte_t *ptep)
+static inline pte_t huge_ptep_get(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
 	pte_t retval = *ptep;
 	if (pte_val(retval))
diff --git a/arch/arm/include/asm/hugetlb.h b/arch/arm/include/asm/hugetlb.h
index d02d6ca88e92..700055b1ccb3 100644
--- a/arch/arm/include/asm/hugetlb.h
+++ b/arch/arm/include/asm/hugetlb.h
@@ -10,14 +10,15 @@
 #ifndef _ASM_ARM_HUGETLB_H
 #define _ASM_ARM_HUGETLB_H
 
+#include <asm/cacheflush.h>
 #include <asm/page.h>
 #include <asm/hugetlb-3level.h>
 #include <asm-generic/hugetlb.h>
 
-static inline void arch_clear_hugepage_flags(struct page *page)
+static inline void arch_clear_hugetlb_flags(struct folio *folio)
 {
-	clear_bit(PG_dcache_clean, &page->flags);
+	clear_bit(PG_dcache_clean, &folio->flags.f);
 }
-#define arch_clear_hugepage_flags arch_clear_hugepage_flags
+#define arch_clear_hugetlb_flags arch_clear_hugetlb_flags
 
 #endif /* _ASM_ARM_HUGETLB_H */
diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h
index 62358d3ca0a8..e7f9961c53b2 100644
--- a/arch/arm/include/asm/hw_breakpoint.h
+++ b/arch/arm/include/asm/hw_breakpoint.h
@@ -84,6 +84,7 @@ static inline void decode_ctrl_reg(u32 reg,
 #define ARM_DSCR_MOE(x)			((x >> 2) & 0xf)
 #define ARM_ENTRY_BREAKPOINT		0x1
 #define ARM_ENTRY_ASYNC_WATCHPOINT	0x2
+#define ARM_ENTRY_CFI_BREAKPOINT	0x3
 #define ARM_ENTRY_SYNC_WATCHPOINT	0xa
 
 /* DSCR monitor/halting bits. */
diff --git a/arch/arm/include/asm/hypervisor.h b/arch/arm/include/asm/hypervisor.h
index bd61502b9715..8a648e506540 100644
--- a/arch/arm/include/asm/hypervisor.h
+++ b/arch/arm/include/asm/hypervisor.h
@@ -7,4 +7,6 @@
 void kvm_init_hyp_services(void);
 bool kvm_arm_hyp_service_available(u32 func_id);
 
+static inline void kvm_arch_init_hyp_services(void) { };
+
 #endif
diff --git a/arch/arm/include/asm/ide.h b/arch/arm/include/asm/ide.h
deleted file mode 100644
index a81e0b0d6747..000000000000
--- a/arch/arm/include/asm/ide.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- *  arch/arm/include/asm/ide.h
- *
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- */
-
-/*
- *  This file contains the ARM architecture specific IDE code.
- */
-
-#ifndef __ASMARM_IDE_H
-#define __ASMARM_IDE_H
-
-#ifdef __KERNEL__
-
-#define __ide_mm_insw(port,addr,len)	readsw(port,addr,len)
-#define __ide_mm_insl(port,addr,len)	readsl(port,addr,len)
-#define __ide_mm_outsw(port,addr,len)	writesw(port,addr,len)
-#define __ide_mm_outsl(port,addr,len)	writesl(port,addr,len)
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASMARM_IDE_H */
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 7fcdc785366c..bae5edf348ef 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/types.h>
 #include <asm/byteorder.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm-generic/pci_iomap.h>
 
 /*
@@ -381,7 +381,7 @@ void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size);
 void iounmap(volatile void __iomem *io_addr);
 #define iounmap iounmap
 
-void *arch_memremap_wb(phys_addr_t phys_addr, size_t size);
+void *arch_memremap_wb(phys_addr_t phys_addr, size_t size, unsigned long flags);
 #define arch_memremap_wb arch_memremap_wb
 
 /*
@@ -407,12 +407,6 @@ struct pci_dev;
 #define pci_iounmap pci_iounmap
 extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
 
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
 #include <asm-generic/io.h>
 
 #ifdef CONFIG_MMU
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index a7c2337b0c7d..26c1d2ced4ce 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -27,13 +27,12 @@ struct irqaction;
 struct pt_regs;
 
 void handle_IRQ(unsigned int, struct pt_regs *);
-void init_IRQ(void);
 
 #ifdef CONFIG_SMP
 #include <linux/cpumask.h>
 
 extern void arch_trigger_cpumask_backtrace(const cpumask_t *mask,
-					   bool exclude_self);
+					   int exclude_cpu);
 #define arch_trigger_cpumask_backtrace arch_trigger_cpumask_backtrace
 #endif
 
diff --git a/arch/arm/include/asm/irq_work.h b/arch/arm/include/asm/irq_work.h
index 3149e4dc1b54..8895999834cc 100644
--- a/arch/arm/include/asm/irq_work.h
+++ b/arch/arm/include/asm/irq_work.h
@@ -9,6 +9,4 @@ static inline bool arch_irq_work_has_interrupt(void)
 	return is_smp();
 }
 
-extern void arch_irq_work_raise(void);
-
 #endif /* _ASM_ARM_IRQ_WORK_H */
diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h
index e12d7d096fc0..a35aba7f548c 100644
--- a/arch/arm/include/asm/jump_label.h
+++ b/arch/arm/include/asm/jump_label.h
@@ -9,13 +9,17 @@
 
 #define JUMP_LABEL_NOP_SIZE 4
 
+/* This macro is also expanded on the Rust side. */
+#define ARCH_STATIC_BRANCH_ASM(key, label)		\
+	"1:\n\t"					\
+	WASM(nop) "\n\t"				\
+	".pushsection __jump_table,  \"aw\"\n\t"	\
+	".word 1b, " label ", " key "\n\t"		\
+	".popsection\n\t"				\
+
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
-		 WASM(nop) "\n\t"
-		 ".pushsection __jump_table,  \"aw\"\n\t"
-		 ".word 1b, %l[l_yes], %c0\n\t"
-		 ".popsection\n\t"
+	asm goto(ARCH_STATIC_BRANCH_ASM("%c0", "%l[l_yes]")
 		 : :  "i" (&((char *)key)[branch]) :  : l_yes);
 
 	return false;
@@ -25,7 +29,7 @@ l_yes:
 
 static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
 {
-	asm_volatile_goto("1:\n\t"
+	asm goto("1:\n\t"
 		 WASM(b) " %l[l_yes]\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".word 1b, %l[l_yes], %c0\n\t"
diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h
index e62832dcba76..a8287e7ab9d4 100644
--- a/arch/arm/include/asm/kexec.h
+++ b/arch/arm/include/asm/kexec.h
@@ -2,8 +2,6 @@
 #ifndef _ARM_KEXEC_H
 #define _ARM_KEXEC_H
 
-#ifdef CONFIG_KEXEC
-
 /* Maximum physical address we can use pages from */
 #define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
 /* Maximum address we can reach in physical address mode */
@@ -82,6 +80,4 @@ static inline struct page *boot_pfn_to_page(unsigned long boot_pfn)
 
 #endif /* __ASSEMBLY__ */
 
-#endif /* CONFIG_KEXEC */
-
 #endif /* _ARM_KEXEC_H */
diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h
index e26a278d301a..5b8dbf1b0be4 100644
--- a/arch/arm/include/asm/kprobes.h
+++ b/arch/arm/include/asm/kprobes.h
@@ -40,8 +40,6 @@ struct kprobe_ctlblk {
 
 void arch_remove_kprobe(struct kprobe *);
 int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
-int kprobe_exceptions_notify(struct notifier_block *self,
-			     unsigned long val, void *data);
 
 /* optinsn template addresses */
 extern __visible kprobe_opcode_t optprobe_template_entry[];
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 9349e7a82c9c..2b18a258204d 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -56,7 +56,6 @@ struct machine_desc {
 	void			(*init_time)(void);
 	void			(*init_machine)(void);
 	void			(*init_late)(void);
-	void			(*handle_irq)(struct pt_regs *);
 	void			(*restart)(enum reboot_mode, const char *);
 };
 
diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h
index 1506422af383..5ec11d7f0d04 100644
--- a/arch/arm/include/asm/mach/dma.h
+++ b/arch/arm/include/asm/mach/dma.h
@@ -44,8 +44,3 @@ struct dma_struct {
  * isa_dma_add - add an ISA-style DMA channel
  */
 extern int isa_dma_add(unsigned int, dma_t *dma);
-
-/*
- * Add the ISA DMA controller.  Always takes channels 0-7.
- */
-extern void isa_init_dma(void);
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index a55a9038abc8..7c2fa7dcec6d 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -5,11 +5,16 @@
  *  Copyright (C) 2000-2002 Russell King
  *  modification for nommu, Hyok S. Choi, 2004
  *
- *  Note: this file should not be included by non-asm/.h files
+ *  Note: this file should not be included explicitly, include <asm/page.h>
+ *  to get access to these definitions.
  */
 #ifndef __ASM_ARM_MEMORY_H
 #define __ASM_ARM_MEMORY_H
 
+#ifndef _ASMARM_PAGE_H
+#error "Do not include <asm/memory.h> directly"
+#endif
+
 #include <linux/compiler.h>
 #include <linux/const.h>
 #include <linux/types.h>
@@ -143,12 +148,6 @@ extern unsigned long vectors_base;
 #endif
 
 /*
- * Convert a page to/from a physical address
- */
-#define page_to_phys(page)	(__pfn_to_phys(page_to_pfn(page)))
-#define phys_to_page(phys)	(pfn_to_page(__phys_to_pfn(phys)))
-
-/*
  * PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical
  * memory.  This is used for XIP and NoMMU kernels, and on platforms that don't
  * have CONFIG_ARM_PATCH_PHYS_VIRT. Assembly code must always use
@@ -288,10 +287,12 @@ static inline unsigned long __phys_to_virt(phys_addr_t x)
 
 #endif
 
-#define virt_to_pfn(kaddr) \
-	((((unsigned long)(kaddr) - PAGE_OFFSET) >> PAGE_SHIFT) + \
-	 PHYS_PFN_OFFSET)
-
+static inline unsigned long virt_to_pfn(const void *p)
+{
+	unsigned long kaddr = (unsigned long)p;
+	return (((kaddr - PAGE_OFFSET) >> PAGE_SHIFT) +
+		PHYS_PFN_OFFSET);
+}
 #define __pa_symbol_nodebug(x)	__virt_to_phys_nodebug((x))
 
 #ifdef CONFIG_DEBUG_VIRTUAL
@@ -370,17 +371,6 @@ static inline unsigned long __virt_to_idmap(unsigned long x)
 #define virt_to_idmap(x)	__virt_to_idmap((unsigned long)(x))
 
 /*
- * Virtual <-> DMA view memory address translations
- * Again, these are *only* valid on the kernel direct mapped RAM
- * memory.  Use of these is *deprecated* (and that doesn't mean
- * use the __ prefixed forms instead.)  See dma-mapping.h.
- */
-#ifndef __virt_to_bus
-#define __virt_to_bus	__virt_to_phys
-#define __bus_to_virt	__phys_to_virt
-#endif
-
-/*
  * Conversion between a struct page and a physical address.
  *
  *  page_to_pfn(page)	convert a struct page * to a PFN number
@@ -397,6 +387,4 @@ static inline unsigned long __virt_to_idmap(unsigned long x)
 
 #endif
 
-#include <asm-generic/memory_model.h>
-
 #endif
diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/asm/mman.h
new file mode 100644
index 000000000000..2189e507c8e0
--- /dev/null
+++ b/arch/arm/include/asm/mman.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MMAN_H__
+#define __ASM_MMAN_H__
+
+#include <asm/system_info.h>
+#include <uapi/asm/mman.h>
+
+static inline bool arch_memory_deny_write_exec_supported(void)
+{
+	return cpu_architecture() >= CPU_ARCH_ARMv6;
+}
+#define arch_memory_deny_write_exec_supported arch_memory_deny_write_exec_supported
+
+#endif /* __ASM_MMAN_H__ */
diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h
index 5546c9751478..07c51a34f77d 100644
--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -37,6 +37,11 @@ struct mod_arch_specific {
 
 struct module;
 u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val);
+#ifdef CONFIG_ARM_MODULE_PLTS
+bool in_module_plt(unsigned long loc);
+#else
+static inline bool in_module_plt(unsigned long loc) { return false; }
+#endif
 
 #ifdef CONFIG_THUMB2_KERNEL
 #define HAVE_ARCH_KALLSYMS_SYMBOL_VALUE
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 5fcc8a600e36..ef11b721230e 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -7,10 +7,7 @@
 #ifndef _ASMARM_PAGE_H
 #define _ASMARM_PAGE_H
 
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT		12
-#define PAGE_SIZE		(_AC(1,UL) << PAGE_SHIFT)
-#define PAGE_MASK		(~((1 << PAGE_SHIFT) - 1))
+#include <vdso/page.h>
 
 #ifndef __ASSEMBLY__
 
@@ -113,6 +110,28 @@ struct cpu_user_fns {
 			unsigned long vaddr, struct vm_area_struct *vma);
 };
 
+void fa_copy_user_highpage(struct page *to, struct page *from,
+	unsigned long vaddr, struct vm_area_struct *vma);
+void fa_clear_user_highpage(struct page *page, unsigned long vaddr);
+void feroceon_copy_user_highpage(struct page *to, struct page *from,
+	unsigned long vaddr, struct vm_area_struct *vma);
+void feroceon_clear_user_highpage(struct page *page, unsigned long vaddr);
+void v4_mc_copy_user_highpage(struct page *to, struct page *from,
+	unsigned long vaddr, struct vm_area_struct *vma);
+void v4_mc_clear_user_highpage(struct page *page, unsigned long vaddr);
+void v4wb_copy_user_highpage(struct page *to, struct page *from,
+	unsigned long vaddr, struct vm_area_struct *vma);
+void v4wb_clear_user_highpage(struct page *page, unsigned long vaddr);
+void v4wt_copy_user_highpage(struct page *to, struct page *from,
+	unsigned long vaddr, struct vm_area_struct *vma);
+void v4wt_clear_user_highpage(struct page *page, unsigned long vaddr);
+void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,
+	unsigned long vaddr, struct vm_area_struct *vma);
+void xsc3_mc_clear_user_highpage(struct page *page, unsigned long vaddr);
+void xscale_mc_copy_user_highpage(struct page *to, struct page *from,
+	unsigned long vaddr, struct vm_area_struct *vma);
+void xscale_mc_clear_user_highpage(struct page *page, unsigned long vaddr);
+
 #ifdef MULTI_USER
 extern struct cpu_user_fns cpu_user;
 
@@ -158,14 +177,16 @@ typedef struct page *pgtable_t;
 
 #ifdef CONFIG_HAVE_ARCH_PFN_VALID
 extern int pfn_valid(unsigned long);
+#define pfn_valid pfn_valid
 #endif
 
-#include <asm/memory.h>
-
 #endif /* !__ASSEMBLY__ */
 
+#include <asm/memory.h>
+
 #define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_TSK_EXEC
 
 #include <asm-generic/getorder.h>
+#include <asm-generic/memory_model.h>
 
 #endif
diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
index fe87397c3d8c..c08f16f2e243 100644
--- a/arch/arm/include/asm/perf_event.h
+++ b/arch/arm/include/asm/perf_event.h
@@ -8,16 +8,9 @@
 #ifndef __ARM_PERF_EVENT_H__
 #define __ARM_PERF_EVENT_H__
 
-#ifdef CONFIG_PERF_EVENTS
-struct pt_regs;
-extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
-extern unsigned long perf_misc_flags(struct pt_regs *regs);
-#define perf_misc_flags(regs)	perf_misc_flags(regs)
-#endif
-
 #define perf_arch_fetch_caller_regs(regs, __ip) { \
 	(regs)->ARM_pc = (__ip); \
-	(regs)->ARM_fp = (unsigned long) __builtin_frame_address(0); \
+	frame_pointer((regs)) = (unsigned long) __builtin_frame_address(0); \
 	(regs)->ARM_sp = current_stack_pointer; \
 	(regs)->ARM_cpsr = SVC_MODE; \
 }
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index 92abd4cd8ca2..6b5392e20f41 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -126,6 +126,9 @@
 #define L_PTE_SHARED		(_AT(pteval_t, 1) << 10)	/* shared(v6), coherent(xsc3) */
 #define L_PTE_NONE		(_AT(pteval_t, 1) << 11)
 
+/* We borrow bit 7 to store the exclusive marker in swap PTEs. */
+#define L_PTE_SWP_EXCLUSIVE	L_PTE_RDONLY
+
 /*
  * These are the memory types, defined to be compatible with
  * pre-ARMv6 CPUs cacheable and bufferable bits: n/a,n/a,C,B
@@ -210,9 +213,8 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
 
 #define pmd_pfn(pmd)		(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
 
-#define pmd_large(pmd)		(pmd_val(pmd) & 2)
-#define pmd_leaf(pmd)		(pmd_val(pmd) & 2)
-#define pmd_bad(pmd)		(pmd_val(pmd) & 2)
+#define pmd_leaf(pmd)		(pmd_val(pmd) & PMD_TYPE_SECT)
+#define pmd_bad(pmd)		pmd_leaf(pmd)
 #define pmd_present(pmd)	(pmd_val(pmd))
 
 #define copy_pmd(pmdpd,pmdps)		\
@@ -239,7 +241,6 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
  * define empty stubs for use by pin_page_for_write.
  */
 #define pmd_hugewillfault(pmd)	(0)
-#define pmd_thp_or_huge(pmd)	(0)
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h
index 2f35b4eddaa8..944fc9955528 100644
--- a/arch/arm/include/asm/pgtable-3level-hwdef.h
+++ b/arch/arm/include/asm/pgtable-3level-hwdef.h
@@ -14,6 +14,7 @@
  * + Level 1/2 descriptor
  *   - common
  */
+#define PUD_TABLE_BIT		(_AT(pmdval_t, 1) << 1)
 #define PMD_TYPE_MASK		(_AT(pmdval_t, 3) << 0)
 #define PMD_TYPE_FAULT		(_AT(pmdval_t, 0) << 0)
 #define PMD_TYPE_TABLE		(_AT(pmdval_t, 3) << 0)
@@ -74,6 +75,7 @@
 #define PHYS_MASK_SHIFT		(40)
 #define PHYS_MASK		((1ULL << PHYS_MASK_SHIFT) - 1)
 
+#ifndef CONFIG_CPU_TTBR0_PAN
 /*
  * TTBR0/TTBR1 split (PAGE_OFFSET):
  *   0x40000000: T0SZ = 2, T1SZ = 0 (not used)
@@ -93,5 +95,35 @@
 #endif
 
 #define TTBR1_SIZE	(((PAGE_OFFSET >> 30) - 1) << 16)
+#else
+/*
+ * With CONFIG_CPU_TTBR0_PAN enabled, TTBR1 is only used during uaccess
+ * disabled regions when TTBR0 is disabled.
+ */
+#define TTBR1_OFFSET	0			/* pointing to swapper_pg_dir */
+#define TTBR1_SIZE	0			/* TTBR1 size controlled via TTBCR.T0SZ */
+#endif
+
+/*
+ * TTBCR register bits.
+ *
+ * The ORGN0 and IRGN0 bits enables different forms of caching when
+ * walking the translation table. Clearing these bits (which is claimed
+ * to be the reset default) means "normal memory, [outer|inner]
+ * non-cacheable"
+ */
+#define TTBCR_EAE		(1 << 31)
+#define TTBCR_IMP		(1 << 30)
+#define TTBCR_SH1_MASK		(3 << 28)
+#define TTBCR_ORGN1_MASK	(3 << 26)
+#define TTBCR_IRGN1_MASK	(3 << 24)
+#define TTBCR_EPD1		(1 << 23)
+#define TTBCR_A1		(1 << 22)
+#define TTBCR_T1SZ_MASK		(7 << 16)
+#define TTBCR_SH0_MASK		(3 << 12)
+#define TTBCR_ORGN0_MASK	(3 << 10)
+#define TTBCR_IRGN0_MASK	(3 << 8)
+#define TTBCR_EPD0		(1 << 7)
+#define TTBCR_T0SZ_MASK		(7 << 0)
 
 #endif
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index eabe72ff7381..7b71a3d414b7 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -76,6 +76,9 @@
 #define L_PTE_NONE		(_AT(pteval_t, 1) << 57)	/* PROT_NONE */
 #define L_PTE_RDONLY		(_AT(pteval_t, 1) << 58)	/* READ ONLY */
 
+/* We borrow bit 7 to store the exclusive marker in swap PTEs. */
+#define L_PTE_SWP_EXCLUSIVE	(_AT(pteval_t, 1) << 7)
+
 #define L_PMD_SECT_VALID	(_AT(pmdval_t, 1) << 0)
 #define L_PMD_SECT_DIRTY	(_AT(pmdval_t, 1) << 55)
 #define L_PMD_SECT_NONE		(_AT(pmdval_t, 1) << 57)
@@ -109,13 +112,12 @@
 #ifndef __ASSEMBLY__
 
 #define pud_none(pud)		(!pud_val(pud))
-#define pud_bad(pud)		(!(pud_val(pud) & 2))
+#define pud_bad(pud)		(!(pud_val(pud) & PUD_TABLE_BIT))
 #define pud_present(pud)	(pud_val(pud))
 #define pmd_table(pmd)		((pmd_val(pmd) & PMD_TYPE_MASK) == \
 						 PMD_TYPE_TABLE)
 #define pmd_sect(pmd)		((pmd_val(pmd) & PMD_TYPE_MASK) == \
 						 PMD_TYPE_SECT)
-#define pmd_large(pmd)		pmd_sect(pmd)
 #define pmd_leaf(pmd)		pmd_sect(pmd)
 
 #define pud_clear(pudp)			\
@@ -135,7 +137,7 @@ static inline pmd_t *pud_pgtable(pud_t pud)
 	return __va(pud_val(pud) & PHYS_MASK & (s32)PAGE_MASK);
 }
 
-#define pmd_bad(pmd)		(!(pmd_val(pmd) & 2))
+#define pmd_bad(pmd)		(!(pmd_val(pmd) & PMD_TABLE_BIT))
 
 #define copy_pmd(pmdpd,pmdps)		\
 	do {				\
@@ -188,7 +190,6 @@ static inline pte_t pte_mkspecial(pte_t pte)
 #define pmd_dirty(pmd)		(pmd_isset((pmd), L_PMD_SECT_DIRTY))
 
 #define pmd_hugewillfault(pmd)	(!pmd_young(pmd) || !pmd_write(pmd))
-#define pmd_thp_or_huge(pmd)	(pmd_huge(pmd) || pmd_trans_huge(pmd))
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define pmd_trans_huge(pmd)	(pmd_val(pmd) && !pmd_table(pmd))
@@ -199,7 +200,7 @@ static inline pmd_t pmd_##fn(pmd_t pmd) { pmd_val(pmd) op; return pmd; }
 
 PMD_BIT_FUNC(wrprotect,	|= L_PMD_SECT_RDONLY);
 PMD_BIT_FUNC(mkold,	&= ~PMD_SECT_AF);
-PMD_BIT_FUNC(mkwrite,   &= ~L_PMD_SECT_RDONLY);
+PMD_BIT_FUNC(mkwrite_novma,   &= ~L_PMD_SECT_RDONLY);
 PMD_BIT_FUNC(mkdirty,   |= L_PMD_SECT_DIRTY);
 PMD_BIT_FUNC(mkclean,   &= ~L_PMD_SECT_DIRTY);
 PMD_BIT_FUNC(mkyoung,   |= PMD_SECT_AF);
@@ -208,7 +209,6 @@ PMD_BIT_FUNC(mkyoung,   |= PMD_SECT_AF);
 
 #define pmd_pfn(pmd)		(((pmd_val(pmd) & PMD_MASK) & PHYS_MASK) >> PAGE_SHIFT)
 #define pfn_pmd(pfn,prot)	(__pmd(((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)))
-#define mk_pmd(page,prot)	pfn_pmd(page_to_pfn(page),prot)
 
 /* No hardware dirty/accessed bits -- generic_pmdp_establish() fits */
 #define pmdp_establish generic_pmdp_establish
diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h
index d16aba48fa0a..61480d096054 100644
--- a/arch/arm/include/asm/pgtable-nommu.h
+++ b/arch/arm/include/asm/pgtable-nommu.h
@@ -21,8 +21,6 @@
 #define pgd_none(pgd)		(0)
 #define pgd_bad(pgd)		(0)
 #define pgd_clear(pgdp)
-#define kern_addr_valid(addr)	(1)
-/* FIXME */
 /*
  * PMD_SHIFT determines the size of the area a second-level page table can map
  * PGDIR_SHIFT determines what a third-level page table entry can map
@@ -45,12 +43,6 @@
 typedef pte_t *pte_addr_t;
 
 /*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
-
-/*
  * Mark the prot value as uncacheable and unbufferable.
  */
 #define pgprot_noncached(prot)	(prot)
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 78a532068fec..86378eec7757 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -10,15 +10,23 @@
 #include <linux/const.h>
 #include <asm/proc-fns.h>
 
-#ifndef CONFIG_MMU
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr)	(empty_zero_page)
+#endif
 
 #include <asm-generic/pgtable-nopud.h>
+
+#ifndef CONFIG_MMU
 #include <asm/pgtable-nommu.h>
 
 #else
 
-#include <asm-generic/pgtable-nopud.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/pgtable-hwdef.h>
 
 
@@ -139,16 +147,11 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
  */
 
 #ifndef __ASSEMBLY__
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern struct page *empty_zero_page;
-#define ZERO_PAGE(vaddr)	(empty_zero_page)
-
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
+#define pgdp_get(pgpd)		READ_ONCE(*pgdp)
+
 #define pud_page(pud)		pmd_page(__pmd(pud_val(pud)))
 #define pud_write(pud)		pmd_write(__pmd(pud_val(pud)))
 
@@ -165,7 +168,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 #define pfn_pte(pfn,prot)	__pte(__pfn_to_phys(pfn) | pgprot_val(prot))
 
 #define pte_page(pte)		pfn_to_page(pte_pfn(pte))
-#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page), prot)
 
 #define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
 
@@ -205,8 +207,11 @@ static inline void __sync_icache_dcache(pte_t pteval)
 extern void __sync_icache_dcache(pte_t pteval);
 #endif
 
-void set_pte_at(struct mm_struct *mm, unsigned long addr,
-		      pte_t *ptep, pte_t pteval);
+#define PFN_PTE_SHIFT		PAGE_SHIFT
+
+void set_ptes(struct mm_struct *mm, unsigned long addr,
+		      pte_t *ptep, pte_t pteval, unsigned int nr);
+#define set_ptes set_ptes
 
 static inline pte_t clear_pte_bit(pte_t pte, pgprot_t prot)
 {
@@ -225,7 +230,7 @@ static inline pte_t pte_wrprotect(pte_t pte)
 	return set_pte_bit(pte, __pgprot(L_PTE_RDONLY));
 }
 
-static inline pte_t pte_mkwrite(pte_t pte)
+static inline pte_t pte_mkwrite_novma(pte_t pte)
 {
 	return clear_pte_bit(pte, __pgprot(L_PTE_RDONLY));
 }
@@ -269,27 +274,47 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 }
 
 /*
- * Encode and decode a swap entry.  Swap entries are stored in the Linux
- * page tables as follows:
+ * Encode/decode swap entries and swap PTEs. Swap PTEs are all PTEs that
+ * are !pte_none() && !pte_present().
+ *
+ * Format of swap PTEs:
  *
  *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
  *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <--------------- offset ------------------------> < type -> 0 0
+ *   <------------------- offset ------------------> E < type -> 0 0
+ *
+ *   E is the exclusive marker that is not stored in swap entries.
  *
- * This gives us up to 31 swap files and 128GB per swap file.  Note that
+ * This gives us up to 31 swap files and 64GB per swap file.  Note that
  * the offset field is always non-zero.
  */
 #define __SWP_TYPE_SHIFT	2
 #define __SWP_TYPE_BITS		5
 #define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
-#define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+#define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT + 1)
 
 #define __swp_type(x)		(((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
 #define __swp_offset(x)		((x).val >> __SWP_OFFSET_SHIFT)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
+#define __swp_entry(type, offset) ((swp_entry_t) { (((type) & __SWP_TYPE_MASK) << __SWP_TYPE_SHIFT) | \
+						   ((offset) << __SWP_OFFSET_SHIFT) })
 
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(swp)	__pte((swp).val | PTE_TYPE_FAULT)
+#define __swp_entry_to_pte(swp)	__pte((swp).val)
+
+static inline bool pte_swp_exclusive(pte_t pte)
+{
+	return pte_isset(pte, L_PTE_SWP_EXCLUSIVE);
+}
+
+static inline pte_t pte_swp_mkexclusive(pte_t pte)
+{
+	return set_pte_bit(pte, __pgprot(L_PTE_SWP_EXCLUSIVE));
+}
+
+static inline pte_t pte_swp_clear_exclusive(pte_t pte)
+{
+	return clear_pte_bit(pte, __pgprot(L_PTE_SWP_EXCLUSIVE));
+}
 
 /*
  * It is an error for the kernel to have more swap files than we can
@@ -298,10 +323,6 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
  */
 #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
 
-/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-/* FIXME: this is not correct */
-#define kern_addr_valid(addr)	(1)
-
 /*
  * We provide our own arch_get_unmapped_area to cope with VIPT caches.
  */
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index c82f7a29ec4a..b4986a23d852 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -147,8 +147,6 @@ static inline void init_proc_vtable(const struct processor *p)
 
 extern void cpu_resume(void);
 
-#include <asm/memory.h>
-
 #ifdef CONFIG_MMU
 
 #define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm)
@@ -180,6 +178,18 @@ extern void cpu_resume(void);
 	})
 #endif
 
+static inline unsigned int cpu_get_ttbcr(void)
+{
+	unsigned int ttbcr;
+	asm("mrc p15, 0, %0, c2, c0, 2" : "=r" (ttbcr));
+	return ttbcr;
+}
+
+static inline void cpu_set_ttbcr(unsigned int ttbcr)
+{
+	asm volatile("mcr p15, 0, %0, c2, c0, 2" : : "r" (ttbcr) : "memory");
+}
+
 #else	/*!CONFIG_MMU */
 
 #define cpu_switch_mm(pgd,mm)	{ }
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index bdc35c0e8dfb..326864f79d18 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -81,9 +81,6 @@ static inline void arch_thread_struct_whitelist(unsigned long *offset,
 /* Forward declaration, a strange C thing */
 struct task_struct;
 
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-
 unsigned long __get_wchan(struct task_struct *p);
 
 #define task_pt_regs(p) \
diff --git a/arch/arm/include/asm/ptdump.h b/arch/arm/include/asm/ptdump.h
index 0c2d3d0d4cc6..46a4575146ee 100644
--- a/arch/arm/include/asm/ptdump.h
+++ b/arch/arm/include/asm/ptdump.h
@@ -21,6 +21,7 @@ struct ptdump_info {
 
 void ptdump_walk_pgd(struct seq_file *s, struct ptdump_info *info);
 #ifdef CONFIG_ARM_PTDUMP_DEBUGFS
+#define EFI_RUNTIME_MAP_END	SZ_1G
 void ptdump_debugfs_register(struct ptdump_info *info, const char *name);
 #else
 static inline void ptdump_debugfs_register(struct ptdump_info *info,
@@ -31,10 +32,10 @@ void ptdump_check_wx(void);
 
 #endif /* CONFIG_ARM_PTDUMP_CORE */
 
-#ifdef CONFIG_DEBUG_WX
-#define debug_checkwx() ptdump_check_wx()
+#ifdef CONFIG_ARM_DEBUG_WX
+#define arm_debug_checkwx() ptdump_check_wx()
 #else
-#define debug_checkwx() do { } while (0)
+#define arm_debug_checkwx() do { } while (0)
 #endif
 
 #endif /* __ASM_PTDUMP_H */
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 1408a6a15d0e..6eb311fb2da0 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -10,6 +10,7 @@
 #include <uapi/asm/ptrace.h>
 
 #ifndef __ASSEMBLY__
+#include <linux/bitfield.h>
 #include <linux/types.h>
 
 struct pt_regs {
@@ -19,6 +20,7 @@ struct pt_regs {
 struct svc_pt_regs {
 	struct pt_regs regs;
 	u32 dacr;
+	u32 ttbcr;
 };
 
 #define to_svc_pt_regs(r) container_of(r, struct svc_pt_regs, regs)
@@ -35,8 +37,8 @@ struct svc_pt_regs {
 
 #ifndef CONFIG_CPU_V7M
 #define isa_mode(regs) \
-	((((regs)->ARM_cpsr & PSR_J_BIT) >> (__ffs(PSR_J_BIT) - 1)) | \
-	 (((regs)->ARM_cpsr & PSR_T_BIT) >> (__ffs(PSR_T_BIT))))
+	(FIELD_GET(PSR_J_BIT, (regs)->ARM_cpsr) << 1 | \
+	 FIELD_GET(PSR_T_BIT, (regs)->ARM_cpsr))
 #else
 #define isa_mode(regs) 1 /* Thumb */
 #endif
@@ -163,6 +165,10 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs)
 		((current_stack_pointer | (THREAD_SIZE - 1)) - 7) - 1;	\
 })
 
+static inline void regs_set_return_value(struct pt_regs *regs, unsigned long rc)
+{
+	regs->ARM_r0 = rc;
+}
 
 /*
  * Update ITSTATE after normal execution of an IT block instruction.
@@ -189,5 +195,8 @@ static inline unsigned long it_advance(unsigned long cpsr)
 	return cpsr;
 }
 
+int syscall_trace_enter(struct pt_regs *regs);
+void syscall_trace_exit(struct pt_regs *regs);
+
 #endif /* __ASSEMBLY__ */
 #endif
diff --git a/arch/arm/include/asm/semihost.h b/arch/arm/include/asm/semihost.h
new file mode 100644
index 000000000000..f365787e7c23
--- /dev/null
+++ b/arch/arm/include/asm/semihost.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * Adapted for ARM and earlycon:
+ * Copyright (C) 2014 Linaro Ltd.
+ * Author: Rob Herring <robh@kernel.org>
+ */
+
+#ifndef _ARM_SEMIHOST_H_
+#define _ARM_SEMIHOST_H_
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define SEMIHOST_SWI	"0xab"
+#else
+#define SEMIHOST_SWI	"0x123456"
+#endif
+
+struct uart_port;
+
+static inline void smh_putc(struct uart_port *port, unsigned char c)
+{
+	asm volatile("mov  r1, %0\n"
+		     "mov  r0, #3\n"
+		     "svc  " SEMIHOST_SWI "\n"
+		     : : "r" (&c) : "r0", "r1", "memory");
+}
+
+#endif /* _ARM_SEMIHOST_H_ */
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index ba0872a8dcda..cc106f946c69 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -5,12 +5,13 @@
  *  Copyright (C) 1997-1999 Russell King
  *
  *  Structure passed to kernel to tell it about the
- *  hardware it's running on.  See Documentation/arm/setup.rst
+ *  hardware it's running on.  See Documentation/arch/arm/setup.rst
  *  for more info.
  */
 #ifndef __ASMARM_SETUP_H
 #define __ASMARM_SETUP_H
 
+#include <linux/screen_info.h>
 #include <uapi/asm/setup.h>
 
 
@@ -28,4 +29,15 @@ extern void save_atags(const struct tag *tags);
 static inline void save_atags(const struct tag *tags) { }
 #endif
 
+struct machine_desc;
+void init_default_cache_policy(unsigned long);
+void paging_init(const struct machine_desc *desc);
+void early_mm_init(const struct machine_desc *);
+void adjust_lowmem_bounds(void);
+void setup_dma_zone(const struct machine_desc *desc);
+
+#ifdef CONFIG_VGA_CONSOLE
+extern struct screen_info vgacon_screen_info;
+#endif
+
 #endif
diff --git a/arch/arm/include/asm/signal.h b/arch/arm/include/asm/signal.h
index 430be7774402..8b84092d1518 100644
--- a/arch/arm/include/asm/signal.h
+++ b/arch/arm/include/asm/signal.h
@@ -22,4 +22,9 @@ typedef struct {
 #define __ARCH_HAS_SA_RESTORER
 
 #include <asm/sigcontext.h>
+
+void do_rseq_syscall(struct pt_regs *regs);
+int do_work_pending(struct pt_regs *regs, unsigned int thread_flags,
+		    int syscall);
+
 #endif
diff --git a/arch/arm/include/asm/simd.h b/arch/arm/include/asm/simd.h
new file mode 100644
index 000000000000..be08a8da046f
--- /dev/null
+++ b/arch/arm/include/asm/simd.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_SIMD_H
+#define _ASM_SIMD_H
+
+#include <linux/compiler_attributes.h>
+#include <linux/preempt.h>
+#include <linux/types.h>
+
+static __must_check inline bool may_use_simd(void)
+{
+	return IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && !in_hardirq()
+	       && !irqs_disabled();
+}
+
+#endif	/* _ASM_SIMD_H */
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 7c1c90d9f582..8c05a7f374d8 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -64,7 +64,7 @@ extern void secondary_startup_arm(void);
 
 extern int __cpu_disable(void);
 
-extern void __cpu_die(unsigned int cpu);
+static inline void __cpu_die(unsigned int cpu) { }
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
diff --git a/arch/arm/include/asm/sparsemem.h b/arch/arm/include/asm/sparsemem.h
index d362233856a5..421e3415338a 100644
--- a/arch/arm/include/asm/sparsemem.h
+++ b/arch/arm/include/asm/sparsemem.h
@@ -2,7 +2,7 @@
 #ifndef ASMARM_SPARSEMEM_H
 #define ASMARM_SPARSEMEM_H
 
-#include <asm/memory.h>
+#include <asm/page.h>
 
 /*
  * Two definitions are required for sparsemem:
diff --git a/arch/arm/include/asm/spectre.h b/arch/arm/include/asm/spectre.h
index 85f9e538fb32..d9c28b3b6b62 100644
--- a/arch/arm/include/asm/spectre.h
+++ b/arch/arm/include/asm/spectre.h
@@ -35,4 +35,8 @@ static inline void spectre_v2_update_state(unsigned int state,
 
 int spectre_bhb_update_vectors(unsigned int method);
 
+void cpu_v7_ca8_ibe(void);
+void cpu_v7_ca15_ibe(void);
+void cpu_v7_bugs_init(void);
+
 #endif
diff --git a/arch/arm/include/asm/spinlock_types.h b/arch/arm/include/asm/spinlock_types.h
index 0c14b36ef101..5404a2a96bf3 100644
--- a/arch/arm/include/asm/spinlock_types.h
+++ b/arch/arm/include/asm/spinlock_types.h
@@ -3,7 +3,7 @@
 #define __ASM_SPINLOCK_TYPES_H
 
 #ifndef __LINUX_SPINLOCK_TYPES_RAW_H
-# error "please don't include this file directly"
+# error "Please do not include this file directly."
 #endif
 
 #define TICKET_SHIFT	16
diff --git a/arch/arm/include/asm/stackprotector.h b/arch/arm/include/asm/stackprotector.h
index 088d03161be5..0bd4979759f1 100644
--- a/arch/arm/include/asm/stackprotector.h
+++ b/arch/arm/include/asm/stackprotector.h
@@ -15,9 +15,6 @@
 #ifndef _ASM_STACKPROTECTOR_H
 #define _ASM_STACKPROTECTOR_H 1
 
-#include <linux/random.h>
-#include <linux/version.h>
-
 #include <asm/thread_info.h>
 
 extern unsigned long __stack_chk_guard;
@@ -30,11 +27,7 @@ extern unsigned long __stack_chk_guard;
  */
 static __always_inline void boot_init_stack_canary(void)
 {
-	unsigned long canary;
-
-	/* Try to get a semi random initial value. */
-	get_random_bytes(&canary, sizeof(canary));
-	canary ^= LINUX_VERSION_CODE;
+	unsigned long canary = get_random_canary();
 
 	current->stack_canary = canary;
 #ifndef CONFIG_STACKPROTECTOR_PER_TASK
diff --git a/arch/arm/include/asm/stacktrace.h b/arch/arm/include/asm/stacktrace.h
index 3e78f921b8b2..ba2f771cca23 100644
--- a/arch/arm/include/asm/stacktrace.h
+++ b/arch/arm/include/asm/stacktrace.h
@@ -2,8 +2,9 @@
 #ifndef __ASM_STACKTRACE_H
 #define __ASM_STACKTRACE_H
 
-#include <asm/ptrace.h>
 #include <linux/llist.h>
+#include <asm/ptrace.h>
+#include <asm/sections.h>
 
 struct stackframe {
 	/*
@@ -21,8 +22,18 @@ struct stackframe {
 	struct llist_node *kr_cur;
 	struct task_struct *tsk;
 #endif
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
+	bool ex_frame;
+#endif
 };
 
+static inline bool on_thread_stack(void)
+{
+	unsigned long delta = current_stack_pointer ^ (unsigned long)current->stack;
+
+	return delta < THREAD_SIZE;
+}
+
 static __always_inline
 void arm_get_current_stackframe(struct pt_regs *regs, struct stackframe *frame)
 {
@@ -34,12 +45,17 @@ void arm_get_current_stackframe(struct pt_regs *regs, struct stackframe *frame)
 		frame->kr_cur = NULL;
 		frame->tsk = current;
 #endif
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
+		frame->ex_frame = in_entry_text(frame->pc);
+#endif
 }
 
 extern int unwind_frame(struct stackframe *frame);
 extern void walk_stackframe(struct stackframe *frame,
-			    int (*fn)(struct stackframe *, void *), void *data);
+			    bool (*fn)(void *, unsigned long), void *data);
 extern void dump_mem(const char *lvl, const char *str, unsigned long bottom,
 		     unsigned long top);
+extern void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+			   const char *loglvl);
 
 #endif	/* __ASM_STACKTRACE_H */
diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
index 506314265c6f..be81b9ca2ea1 100644
--- a/arch/arm/include/asm/suspend.h
+++ b/arch/arm/include/asm/suspend.h
@@ -13,5 +13,6 @@ extern void cpu_resume(void);
 extern void cpu_resume_no_hyp(void);
 extern void cpu_resume_arm(void);
 extern int cpu_suspend(unsigned long, int (*)(unsigned long));
+extern void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr);
 
 #endif
diff --git a/arch/arm/include/asm/sync_bitops.h b/arch/arm/include/asm/sync_bitops.h
index 6f5d627c44a3..f46b3c570f92 100644
--- a/arch/arm/include/asm/sync_bitops.h
+++ b/arch/arm/include/asm/sync_bitops.h
@@ -14,14 +14,35 @@
  * ops which are SMP safe even on a UP kernel.
  */
 
+/*
+ * Unordered
+ */
+
 #define sync_set_bit(nr, p)		_set_bit(nr, p)
 #define sync_clear_bit(nr, p)		_clear_bit(nr, p)
 #define sync_change_bit(nr, p)		_change_bit(nr, p)
-#define sync_test_and_set_bit(nr, p)	_test_and_set_bit(nr, p)
-#define sync_test_and_clear_bit(nr, p)	_test_and_clear_bit(nr, p)
-#define sync_test_and_change_bit(nr, p)	_test_and_change_bit(nr, p)
 #define sync_test_bit(nr, addr)		test_bit(nr, addr)
-#define arch_sync_cmpxchg		arch_cmpxchg
 
+/*
+ * Fully ordered
+ */
+
+int _sync_test_and_set_bit(int nr, volatile unsigned long * p);
+#define sync_test_and_set_bit(nr, p)	_sync_test_and_set_bit(nr, p)
+
+int _sync_test_and_clear_bit(int nr, volatile unsigned long * p);
+#define sync_test_and_clear_bit(nr, p)	_sync_test_and_clear_bit(nr, p)
+
+int _sync_test_and_change_bit(int nr, volatile unsigned long * p);
+#define sync_test_and_change_bit(nr, p)	_sync_test_and_change_bit(nr, p)
+
+#define arch_sync_cmpxchg(ptr, old, new)				\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	__smp_mb__before_atomic();					\
+	__ret = arch_cmpxchg_relaxed((ptr), (old), (new));		\
+	__smp_mb__after_atomic();					\
+	__ret;								\
+})
 
 #endif
diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h
index dfeed440254a..18b102a30741 100644
--- a/arch/arm/include/asm/syscall.h
+++ b/arch/arm/include/asm/syscall.h
@@ -25,6 +25,9 @@ static inline int syscall_get_nr(struct task_struct *task,
 	if (IS_ENABLED(CONFIG_AEABI) && !IS_ENABLED(CONFIG_OABI_COMPAT))
 		return task_thread_info(task)->abi_syscall;
 
+	if (task_thread_info(task)->abi_syscall == -1)
+		return -1;
+
 	return task_thread_info(task)->abi_syscall & __NR_SYSCALL_MASK;
 }
 
@@ -65,6 +68,30 @@ static inline void syscall_set_return_value(struct task_struct *task,
 	regs->ARM_r0 = (long) error ? error : val;
 }
 
+static inline void syscall_set_nr(struct task_struct *task,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	if (nr == -1) {
+		task_thread_info(task)->abi_syscall = -1;
+		/*
+		 * When the syscall number is set to -1, the syscall will be
+		 * skipped.  In this case the syscall return value has to be
+		 * set explicitly, otherwise the first syscall argument is
+		 * returned as the syscall return value.
+		 */
+		syscall_set_return_value(task, regs, -ENOSYS, 0);
+		return;
+	}
+	if ((IS_ENABLED(CONFIG_AEABI) && !IS_ENABLED(CONFIG_OABI_COMPAT))) {
+		task_thread_info(task)->abi_syscall = nr;
+		return;
+	}
+	task_thread_info(task)->abi_syscall =
+		(task_thread_info(task)->abi_syscall & ~__NR_SYSCALL_MASK) |
+		(nr & __NR_SYSCALL_MASK);
+}
+
 #define SYSCALL_MAX_ARGS 7
 
 static inline void syscall_get_arguments(struct task_struct *task,
@@ -77,6 +104,19 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	memcpy(args, &regs->ARM_r0 + 1, 5 * sizeof(args[0]));
 }
 
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 const unsigned long *args)
+{
+	memcpy(&regs->ARM_r0, args, 6 * sizeof(args[0]));
+	/*
+	 * Also copy the first argument into ARM_ORIG_r0
+	 * so that syscall_get_arguments() would return it
+	 * instead of the previous value.
+	 */
+	regs->ARM_ORIG_r0 = regs->ARM_r0;
+}
+
 static inline int syscall_get_arch(struct task_struct *task)
 {
 	/* ARM tasks don't change audit architectures on the fly. */
diff --git a/arch/arm/include/asm/syscalls.h b/arch/arm/include/asm/syscalls.h
new file mode 100644
index 000000000000..5912e7cffa6a
--- /dev/null
+++ b/arch/arm/include/asm/syscalls.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __ASM_SYSCALLS_H
+#define __ASM_SYSCALLS_H
+
+#include <linux/linkage.h>
+#include <linux/types.h>
+
+struct pt_regs;
+asmlinkage int sys_sigreturn(struct pt_regs *regs);
+asmlinkage int sys_rt_sigreturn(struct pt_regs *regs);
+asmlinkage long sys_arm_fadvise64_64(int fd, int advice,
+				     loff_t offset, loff_t len);
+
+struct oldabi_stat64;
+asmlinkage long sys_oabi_stat64(const char __user * filename,
+				struct oldabi_stat64 __user * statbuf);
+asmlinkage long sys_oabi_lstat64(const char __user * filename,
+				 struct oldabi_stat64 __user * statbuf);
+asmlinkage long sys_oabi_fstat64(unsigned long fd,
+				 struct oldabi_stat64 __user * statbuf);
+asmlinkage long sys_oabi_fstatat64(int dfd,
+				   const char __user *filename,
+				   struct oldabi_stat64  __user *statbuf,
+				   int flag);
+asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd,
+				 unsigned long arg);
+struct oabi_epoll_event;
+asmlinkage long sys_oabi_epoll_ctl(int epfd, int op, int fd,
+				   struct oabi_epoll_event __user *event);
+struct oabi_sembuf;
+struct old_timespec32;
+asmlinkage long sys_oabi_semtimedop(int semid,
+				    struct oabi_sembuf __user *tsops,
+				    unsigned nsops,
+				    const struct old_timespec32 __user *timeout);
+asmlinkage long sys_oabi_semop(int semid, struct oabi_sembuf __user *tsops,
+			       unsigned nsops);
+asmlinkage int sys_oabi_ipc(uint call, int first, int second, int third,
+			    void __user *ptr, long fifth);
+struct sockaddr;
+asmlinkage long sys_oabi_bind(int fd, struct sockaddr __user *addr, int addrlen);
+asmlinkage long sys_oabi_connect(int fd, struct sockaddr __user *addr, int addrlen);
+asmlinkage long sys_oabi_sendto(int fd, void __user *buff,
+				size_t len, unsigned flags,
+				struct sockaddr __user *addr,
+				int addrlen);
+struct user_msghdr;
+asmlinkage long sys_oabi_sendmsg(int fd, struct user_msghdr __user *msg, unsigned flags);
+asmlinkage long sys_oabi_socketcall(int call, unsigned long __user *args);
+
+#endif
diff --git a/arch/arm/include/asm/tcm.h b/arch/arm/include/asm/tcm.h
index d8bd8a4b0ede..e1f7dca86a22 100644
--- a/arch/arm/include/asm/tcm.h
+++ b/arch/arm/include/asm/tcm.h
@@ -9,9 +9,7 @@
 #ifndef __ASMARM_TCM_H
 #define __ASMARM_TCM_H
 
-#ifndef CONFIG_HAVE_TCM
-#error "You should not be including tcm.h unless you have a TCM!"
-#endif
+#ifdef CONFIG_HAVE_TCM
 
 #include <linux/compiler.h>
 
@@ -29,4 +27,11 @@ void tcm_free(void *addr, size_t len);
 bool tcm_dtcm_present(void);
 bool tcm_itcm_present(void);
 
+void __init tcm_init(void);
+#else
+/* No TCM support, just blank inlines to be optimized out */
+static inline void tcm_init(void)
+{
+}
+#endif
 #endif
diff --git a/arch/arm/include/asm/patch.h b/arch/arm/include/asm/text-patching.h
index 0b48247c4600..0b48247c4600 100644
--- a/arch/arm/include/asm/patch.h
+++ b/arch/arm/include/asm/text-patching.h
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index aecc403b2880..943ffcf069d2 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -40,6 +40,7 @@ struct task_struct;
 DECLARE_PER_CPU(struct task_struct *, __entry_task);
 
 #include <asm/types.h>
+#include <asm/traps.h>
 
 struct cpu_context_save {
 	__u32	r4;
@@ -66,7 +67,6 @@ struct thread_info {
 	__u32			cpu_domain;	/* cpu domain */
 	struct cpu_context_save	cpu_context;	/* cpu context */
 	__u32			abi_syscall;	/* ABI type and syscall nr */
-	__u8			used_cp[16];	/* thread used copro */
 	unsigned long		tp_value[2];	/* TLS registers */
 	union fp_state		fpstate __attribute__((aligned(8)));
 	union vfp_state		vfpstate;
@@ -105,6 +105,21 @@ extern void iwmmxt_task_restore(struct thread_info *, void *);
 extern void iwmmxt_task_release(struct thread_info *);
 extern void iwmmxt_task_switch(struct thread_info *);
 
+extern int iwmmxt_undef_handler(struct pt_regs *, u32);
+
+static inline void register_iwmmxt_undef_handler(void)
+{
+	static struct undef_hook iwmmxt_undef_hook = {
+		.instr_mask	= 0x0c000e00,
+		.instr_val	= 0x0c000000,
+		.cpsr_mask	= MODE_MASK | PSR_T_BIT,
+		.cpsr_val	= USR_MODE,
+		.fn		= iwmmxt_undef_handler,
+	};
+
+	register_undef_hook(&iwmmxt_undef_hook);
+}
+
 extern void vfp_sync_hwstate(struct thread_info *);
 extern void vfp_flush_hwstate(struct thread_info *);
 
@@ -128,15 +143,16 @@ extern int vfp_restore_user_hwstate(struct user_vfp *,
 #define TIF_NEED_RESCHED	1	/* rescheduling necessary */
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_UPROBE		3	/* breakpointed or singlestepping */
-#define TIF_SYSCALL_TRACE	4	/* syscall trace active */
-#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
-#define TIF_SYSCALL_TRACEPOINT	6	/* syscall tracepoint instrumentation */
-#define TIF_SECCOMP		7	/* seccomp syscall filtering active */
-#define TIF_NOTIFY_SIGNAL	8	/* signal notifications exist */
+#define TIF_NOTIFY_SIGNAL	4	/* signal notifications exist */
 
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK	20
+#define TIF_RESTORE_SIGMASK	19
+#define TIF_SYSCALL_TRACE	20	/* syscall trace active */
+#define TIF_SYSCALL_AUDIT	21	/* syscall auditing active */
+#define TIF_SYSCALL_TRACEPOINT	22	/* syscall tracepoint instrumentation */
+#define TIF_SECCOMP		23	/* seccomp syscall filtering active */
+
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index b8cbe03ad260..ea4fbe7b17f6 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -26,20 +26,13 @@
 
 #else /* !CONFIG_MMU */
 
-#include <linux/swap.h>
 #include <asm/tlbflush.h>
-
-static inline void __tlb_remove_table(void *_table)
-{
-	free_page_and_swap_cache((struct page *)_table);
-}
-
 #include <asm-generic/tlb.h>
 
 static inline void
 __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, unsigned long addr)
 {
-	pgtable_pte_page_dtor(pte);
+	struct ptdesc *ptdesc = page_ptdesc(pte);
 
 #ifndef CONFIG_ARM_LPAE
 	/*
@@ -50,17 +43,16 @@ __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, unsigned long addr)
 	__tlb_adjust_range(tlb, addr - PAGE_SIZE, 2 * PAGE_SIZE);
 #endif
 
-	tlb_remove_table(tlb, pte);
+	tlb_remove_ptdesc(tlb, ptdesc);
 }
 
 static inline void
 __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp, unsigned long addr)
 {
 #ifdef CONFIG_ARM_LPAE
-	struct page *page = virt_to_page(pmdp);
+	struct ptdesc *ptdesc = virt_to_ptdesc(pmdp);
 
-	pgtable_pmd_page_dtor(page);
-	tlb_remove_table(tlb, page);
+	tlb_remove_ptdesc(tlb, ptdesc);
 #endif
 }
 
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index 0ccc985b90af..38c6e4a2a0b6 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -619,18 +619,22 @@ extern void flush_bp_all(void);
  * If PG_dcache_clean is not set for the page, we need to ensure that any
  * cache entries for the kernels virtual memory range are written
  * back to the page. On ARMv6 and later, the cache coherency is handled via
- * the set_pte_at() function.
+ * the set_ptes() function.
  */
 #if __LINUX_ARM_ARCH__ < 6
-extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
-	pte_t *ptep);
+void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
+		unsigned long addr, pte_t *ptep, unsigned int nr);
 #else
-static inline void update_mmu_cache(struct vm_area_struct *vma,
-				    unsigned long addr, pte_t *ptep)
+static inline void update_mmu_cache_range(struct vm_fault *vmf,
+		struct vm_area_struct *vma, unsigned long addr, pte_t *ptep,
+		unsigned int nr)
 {
 }
 #endif
 
+#define update_mmu_cache(vma, addr, ptep) \
+	update_mmu_cache_range(NULL, vma, addr, ptep, 1)
+
 #define update_mmu_cache_pmd(vma, address, pmd) do { } while (0)
 
 #endif
diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h
index c7d2510e5a78..ad36b6570067 100644
--- a/arch/arm/include/asm/topology.h
+++ b/arch/arm/include/asm/topology.h
@@ -13,6 +13,7 @@
 #define arch_set_freq_scale topology_set_freq_scale
 #define arch_scale_freq_capacity topology_get_freq_scale
 #define arch_scale_freq_invariant topology_scale_freq_invariant
+#define arch_scale_freq_ref topology_get_freq_ref
 #endif
 
 /* Replace task scheduler's default cpu-invariant accounting */
@@ -21,9 +22,9 @@
 /* Enable topology flag updates */
 #define arch_update_cpu_topology topology_update_cpu_topology
 
-/* Replace task scheduler's default thermal pressure API */
-#define arch_scale_thermal_pressure topology_get_thermal_pressure
-#define arch_update_thermal_pressure	topology_update_thermal_pressure
+/* Replace task scheduler's default HW pressure API */
+#define arch_scale_hw_pressure topology_get_hw_pressure
+#define arch_update_hw_pressure	topology_update_hw_pressure
 
 #else
 
diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h
index 987fefb0a4db..2621b9fb9b19 100644
--- a/arch/arm/include/asm/traps.h
+++ b/arch/arm/include/asm/traps.h
@@ -2,6 +2,7 @@
 #ifndef _ASMARM_TRAP_H
 #define _ASMARM_TRAP_H
 
+#include <linux/linkage.h>
 #include <linux/list.h>
 
 struct pt_regs;
@@ -28,11 +29,20 @@ static inline int __in_irqentry_text(unsigned long ptr)
 	       ptr < (unsigned long)&__irqentry_text_end;
 }
 
-extern void __init early_trap_init(void *);
+extern void early_trap_init(void *);
 extern void dump_backtrace_entry(unsigned long where, unsigned long from,
 				 unsigned long frame, const char *loglvl);
 extern void ptrace_break(struct pt_regs *regs);
 
 extern void *vectors_page;
 
+asmlinkage void dump_backtrace_stm(u32 *stack, u32 instruction, const char *loglvl);
+asmlinkage void do_undefinstr(struct pt_regs *regs);
+asmlinkage void handle_fiq_as_nmi(struct pt_regs *regs);
+asmlinkage void bad_mode(struct pt_regs *regs, int reason);
+asmlinkage int arm_syscall(int no, struct pt_regs *regs);
+asmlinkage void baddataabort(int code, unsigned long instr, struct pt_regs *regs);
+asmlinkage void __div0(void);
+asmlinkage void handle_bad_stack(struct pt_regs *regs);
+
 #endif
diff --git a/arch/arm/include/asm/uaccess-asm.h b/arch/arm/include/asm/uaccess-asm.h
index 6451a433912c..4bccd895d954 100644
--- a/arch/arm/include/asm/uaccess-asm.h
+++ b/arch/arm/include/asm/uaccess-asm.h
@@ -5,7 +5,7 @@
 
 #include <asm/asm-offsets.h>
 #include <asm/domain.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/thread_info.h>
 
 	.macro	csdb
@@ -39,8 +39,9 @@
 #endif
 	.endm
 
+#if defined(CONFIG_CPU_SW_DOMAIN_PAN)
+
 	.macro	uaccess_disable, tmp, isb=1
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
 	/*
 	 * Whenever we re-enter userspace, the domains should always be
 	 * set appropriately.
@@ -50,11 +51,9 @@
 	.if	\isb
 	instr_sync
 	.endif
-#endif
 	.endm
 
 	.macro	uaccess_enable, tmp, isb=1
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
 	/*
 	 * Whenever we re-enter userspace, the domains should always be
 	 * set appropriately.
@@ -64,15 +63,61 @@
 	.if	\isb
 	instr_sync
 	.endif
-#endif
 	.endm
 
+#elif defined(CONFIG_CPU_TTBR0_PAN)
+
+	.macro	uaccess_disable, tmp, isb=1
+	/*
+	 * Disable TTBR0 page table walks (EDP0 = 1), use the reserved ASID
+	 * from TTBR1 (A1 = 1) and enable TTBR1 page table walks for kernel
+	 * addresses by reducing TTBR0 range to 32MB (T0SZ = 7).
+	 */
+	mrc	p15, 0, \tmp, c2, c0, 2		@ read TTBCR
+	orr	\tmp, \tmp, #TTBCR_EPD0 | TTBCR_T0SZ_MASK
+	orr	\tmp, \tmp, #TTBCR_A1
+	mcr	p15, 0, \tmp, c2, c0, 2		@ write TTBCR
+	.if	\isb
+	instr_sync
+	.endif
+	.endm
+
+	.macro	uaccess_enable, tmp, isb=1
+	/*
+	 * Enable TTBR0 page table walks (T0SZ = 0, EDP0 = 0) and ASID from
+	 * TTBR0 (A1 = 0).
+	 */
+	mrc	p15, 0, \tmp, c2, c0, 2		@ read TTBCR
+	bic	\tmp, \tmp, #TTBCR_EPD0 | TTBCR_T0SZ_MASK
+	bic	\tmp, \tmp, #TTBCR_A1
+	mcr	p15, 0, \tmp, c2, c0, 2		@ write TTBCR
+	.if	\isb
+	instr_sync
+	.endif
+	.endm
+
+#else
+
+	.macro	uaccess_disable, tmp, isb=1
+	.endm
+
+	.macro	uaccess_enable, tmp, isb=1
+	.endm
+
+#endif
+
 #if defined(CONFIG_CPU_SW_DOMAIN_PAN) || defined(CONFIG_CPU_USE_DOMAINS)
 #define DACR(x...)	x
 #else
 #define DACR(x...)
 #endif
 
+#ifdef CONFIG_CPU_TTBR0_PAN
+#define PAN(x...)	x
+#else
+#define PAN(x...)
+#endif
+
 	/*
 	 * Save the address limit on entry to a privileged exception.
 	 *
@@ -86,6 +131,8 @@
 	.macro	uaccess_entry, tsk, tmp0, tmp1, tmp2, disable
  DACR(	mrc	p15, 0, \tmp0, c3, c0, 0)
  DACR(	str	\tmp0, [sp, #SVC_DACR])
+ PAN(	mrc	p15, 0, \tmp0, c2, c0, 2)
+ PAN(	str	\tmp0, [sp, #SVC_TTBCR])
 	.if \disable && IS_ENABLED(CONFIG_CPU_SW_DOMAIN_PAN)
 	/* kernel=client, user=no access */
 	mov	\tmp2, #DACR_UACCESS_DISABLE
@@ -104,8 +151,11 @@
 	.macro	uaccess_exit, tsk, tmp0, tmp1
  DACR(	ldr	\tmp0, [sp, #SVC_DACR])
  DACR(	mcr	p15, 0, \tmp0, c3, c0, 0)
+ PAN(	ldr	\tmp0, [sp, #SVC_TTBCR])
+ PAN(	mcr	p15, 0, \tmp0, c2, c0, 2)
 	.endm
 
 #undef DACR
+#undef PAN
 
 #endif /* __ASM_UACCESS_ASM_H__ */
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 2fcbec9c306c..f90be312418e 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -8,11 +8,14 @@
 /*
  * User space memory access functions
  */
+#include <linux/kernel.h>
 #include <linux/string.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/domain.h>
-#include <asm/unaligned.h>
+#include <linux/unaligned.h>
 #include <asm/unified.h>
+#include <asm/pgtable.h>
+#include <asm/proc-fns.h>
 #include <asm/compiler.h>
 
 #include <asm/extable.h>
@@ -23,9 +26,10 @@
  * perform such accesses (eg, via list poison values) which could then
  * be exploited for priviledge escalation.
  */
+#if defined(CONFIG_CPU_SW_DOMAIN_PAN)
+
 static __always_inline unsigned int uaccess_save_and_enable(void)
 {
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
 	unsigned int old_domain = get_domain();
 
 	/* Set the current domain access to permit user accesses */
@@ -33,19 +37,49 @@ static __always_inline unsigned int uaccess_save_and_enable(void)
 		   domain_val(DOMAIN_USER, DOMAIN_CLIENT));
 
 	return old_domain;
-#else
-	return 0;
-#endif
 }
 
 static __always_inline void uaccess_restore(unsigned int flags)
 {
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
 	/* Restore the user access mask */
 	set_domain(flags);
-#endif
 }
 
+#elif defined(CONFIG_CPU_TTBR0_PAN)
+
+static __always_inline unsigned int uaccess_save_and_enable(void)
+{
+	unsigned int old_ttbcr = cpu_get_ttbcr();
+
+	/*
+	 * Enable TTBR0 page table walks (T0SZ = 0, EDP0 = 0) and ASID from
+	 * TTBR0 (A1 = 0).
+	 */
+	cpu_set_ttbcr(old_ttbcr & ~(TTBCR_A1 | TTBCR_EPD0 | TTBCR_T0SZ_MASK));
+	isb();
+
+	return old_ttbcr;
+}
+
+static inline void uaccess_restore(unsigned int flags)
+{
+	cpu_set_ttbcr(flags);
+	isb();
+}
+
+#else
+
+static inline unsigned int uaccess_save_and_enable(void)
+{
+	return 0;
+}
+
+static inline void uaccess_restore(unsigned int flags)
+{
+}
+
+#endif
+
 /*
  * These two are intentionally not defined anywhere - if the kernel
  * code generates any references to them, that's a bug.
@@ -109,16 +143,6 @@ extern int __get_user_64t_1(void *);
 extern int __get_user_64t_2(void *);
 extern int __get_user_64t_4(void *);
 
-#define __GUP_CLOBBER_1	"lr", "cc"
-#ifdef CONFIG_CPU_USE_DOMAINS
-#define __GUP_CLOBBER_2	"ip", "lr", "cc"
-#else
-#define __GUP_CLOBBER_2 "lr", "cc"
-#endif
-#define __GUP_CLOBBER_4	"lr", "cc"
-#define __GUP_CLOBBER_32t_8 "lr", "cc"
-#define __GUP_CLOBBER_8	"lr", "cc"
-
 #define __get_user_x(__r2, __p, __e, __l, __s)				\
 	   __asm__ __volatile__ (					\
 		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
@@ -126,7 +150,7 @@ extern int __get_user_64t_4(void *);
 		"bl	__get_user_" #__s				\
 		: "=&r" (__e), "=r" (__r2)				\
 		: "0" (__p), "r" (__l)					\
-		: __GUP_CLOBBER_##__s)
+		: "ip", "lr", "cc")
 
 /* narrowing a double-word get into a single 32bit word register: */
 #ifdef __ARMEB__
@@ -148,7 +172,7 @@ extern int __get_user_64t_4(void *);
 		"bl	__get_user_64t_" #__s				\
 		: "=&r" (__e), "=r" (__r2)				\
 		: "0" (__p), "r" (__l)					\
-		: __GUP_CLOBBER_##__s)
+		: "ip", "lr", "cc")
 #else
 #define __get_user_x_64t __get_user_x
 #endif
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 3676e82cf95c..9fb00973c608 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -37,7 +37,6 @@
 #define __ARCH_WANT_SYS_FORK
 #define __ARCH_WANT_SYS_VFORK
 #define __ARCH_WANT_SYS_CLONE
-#define __ARCH_WANT_SYS_CLONE3
 
 /*
  * Unimplemented (or alternatively implemented) syscalls
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index b51f85417f58..d60b09a5acfc 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -40,6 +40,10 @@ extern void unwind_table_del(struct unwind_table *tab);
 extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk,
 			     const char *loglvl);
 
+void __aeabi_unwind_cpp_pr0(void);
+void __aeabi_unwind_cpp_pr1(void);
+void __aeabi_unwind_cpp_pr2(void);
+
 #endif	/* !__ASSEMBLY__ */
 
 #ifdef CONFIG_ARM_UNWIND
diff --git a/arch/arm/include/asm/vdso.h b/arch/arm/include/asm/vdso.h
index 5b85889f82ee..88364a6727ff 100644
--- a/arch/arm/include/asm/vdso.h
+++ b/arch/arm/include/asm/vdso.h
@@ -4,6 +4,8 @@
 
 #ifdef __KERNEL__
 
+#define __VDSO_PAGES	4
+
 #ifndef __ASSEMBLY__
 
 struct mm_struct;
diff --git a/arch/arm/include/asm/vdso/gettimeofday.h b/arch/arm/include/asm/vdso/gettimeofday.h
index 2134cbd5469f..1e9f81639c88 100644
--- a/arch/arm/include/asm/vdso/gettimeofday.h
+++ b/arch/arm/include/asm/vdso/gettimeofday.h
@@ -15,8 +15,6 @@
 
 #define VDSO_HAS_CLOCK_GETRES		1
 
-extern struct vdso_data *__get_datapage(void);
-
 static __always_inline int gettimeofday_fallback(
 				struct __kernel_old_timeval *_tv,
 				struct timezone *_tz)
@@ -114,7 +112,7 @@ static inline bool arm_vdso_hres_capable(void)
 #define __arch_vdso_hres_capable arm_vdso_hres_capable
 
 static __always_inline u64 __arch_get_hw_counter(int clock_mode,
-						 const struct vdso_data *vd)
+						 const struct vdso_time_data *vd)
 {
 #ifdef CONFIG_ARM_ARCH_TIMER
 	u64 cycle_now;
@@ -137,11 +135,6 @@ static __always_inline u64 __arch_get_hw_counter(int clock_mode,
 #endif
 }
 
-static __always_inline const struct vdso_data *__arch_get_vdso_data(void)
-{
-	return __get_datapage();
-}
-
 #endif /* !__ASSEMBLY__ */
 
 #endif /* __ASM_VDSO_GETTIMEOFDAY_H */
diff --git a/arch/arm/include/asm/vdso/vsyscall.h b/arch/arm/include/asm/vdso/vsyscall.h
index 47e41ae8ccd0..ff1c729af05f 100644
--- a/arch/arm/include/asm/vdso/vsyscall.h
+++ b/arch/arm/include/asm/vdso/vsyscall.h
@@ -4,29 +4,15 @@
 
 #ifndef __ASSEMBLY__
 
-#include <linux/timekeeper_internal.h>
 #include <vdso/datapage.h>
 #include <asm/cacheflush.h>
 
-extern struct vdso_data *vdso_data;
-extern bool cntvct_ok;
-
-/*
- * Update the vDSO data page to keep in sync with kernel timekeeping.
- */
-static __always_inline
-struct vdso_data *__arm_get_k_vdso_data(void)
-{
-	return vdso_data;
-}
-#define __arch_get_k_vdso_data __arm_get_k_vdso_data
-
 static __always_inline
-void __arm_sync_vdso_data(struct vdso_data *vdata)
+void __arch_sync_vdso_time_data(struct vdso_time_data *vdata)
 {
 	flush_dcache_page(virt_to_page(vdata));
 }
-#define __arch_sync_vdso_data __arm_sync_vdso_data
+#define __arch_sync_vdso_time_data __arch_sync_vdso_time_data
 
 /* The asm-generic header needs to be included after the definitions above */
 #include <asm-generic/vdso/vsyscall.h>
diff --git a/arch/arm/include/asm/vdso_datapage.h b/arch/arm/include/asm/vdso_datapage.h
deleted file mode 100644
index bef68f59928d..000000000000
--- a/arch/arm/include/asm/vdso_datapage.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Adapted from arm64 version.
- *
- * Copyright (C) 2012 ARM Limited
- */
-#ifndef __ASM_VDSO_DATAPAGE_H
-#define __ASM_VDSO_DATAPAGE_H
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-#include <vdso/datapage.h>
-#include <asm/page.h>
-
-union vdso_data_store {
-	struct vdso_data	data[CS_BASES];
-	u8			page[PAGE_SIZE];
-};
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_VDSO_DATAPAGE_H */
diff --git a/arch/arm/include/asm/vfp.h b/arch/arm/include/asm/vfp.h
index 19928bfb4f9c..85ccc422d4d0 100644
--- a/arch/arm/include/asm/vfp.h
+++ b/arch/arm/include/asm/vfp.h
@@ -9,16 +9,6 @@
 #ifndef __ASM_VFP_H
 #define __ASM_VFP_H
 
-#ifndef CONFIG_AS_VFP_VMRS_FPINST
-#define FPSID			cr0
-#define FPSCR			cr1
-#define MVFR1			cr6
-#define MVFR0			cr7
-#define FPEXC			cr8
-#define FPINST			cr9
-#define FPINST2			cr10
-#endif
-
 /* FPSID bits */
 #define FPSID_IMPLEMENTER_BIT	(24)
 #define FPSID_IMPLEMENTER_MASK	(0xff << FPSID_IMPLEMENTER_BIT)
@@ -87,6 +77,12 @@
 #define MVFR0_DP_BIT		(8)
 #define MVFR0_DP_MASK		(0xf << MVFR0_DP_BIT)
 
+/* MVFR1 bits */
+#define MVFR1_ASIMDHP_BIT	(20)
+#define MVFR1_ASIMDHP_MASK	(0xf << MVFR1_ASIMDHP_BIT)
+#define MVFR1_FPHP_BIT		(24)
+#define MVFR1_FPHP_MASK		(0xf << MVFR1_FPHP_BIT)
+
 /* Bit patterns for decoding the packaged operation descriptors */
 #define VFPOPDESC_LENGTH_BIT	(9)
 #define VFPOPDESC_LENGTH_MASK	(0x07 << VFPOPDESC_LENGTH_BIT)
diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h
index ba0d4cb5377e..e2e1d5a3727a 100644
--- a/arch/arm/include/asm/vfpmacros.h
+++ b/arch/arm/include/asm/vfpmacros.h
@@ -8,7 +8,6 @@
 
 #include <asm/vfp.h>
 
-#ifdef CONFIG_AS_VFP_VMRS_FPINST
 	.macro	VFPFMRX, rd, sysreg, cond
 	vmrs\cond	\rd, \sysreg
 	.endm
@@ -16,16 +15,6 @@
 	.macro	VFPFMXR, sysreg, rd, cond
 	vmsr\cond	\sysreg, \rd
 	.endm
-#else
-	@ Macros to allow building with old toolkits (with no VFP support)
-	.macro	VFPFMRX, rd, sysreg, cond
-	MRC\cond	p10, 7, \rd, \sysreg, cr0, 0	@ FMRX	\rd, \sysreg
-	.endm
-
-	.macro	VFPFMXR, sysreg, rd, cond
-	MCR\cond	p10, 7, \rd, \sysreg, cr0, 0	@ FMXR	\sysreg, \rd
-	.endm
-#endif
 
 	@ read all the working registers back into the VFP
 	.macro	VFPFLDMIA, base, tmp
diff --git a/arch/arm/include/asm/vga.h b/arch/arm/include/asm/vga.h
index 7c0bee57855a..6c430ec371df 100644
--- a/arch/arm/include/asm/vga.h
+++ b/arch/arm/include/asm/vga.h
@@ -5,6 +5,7 @@
 #include <linux/io.h>
 
 extern unsigned long vga_base;
+extern struct screen_info vgacon_screen_info;
 
 #define VGA_MAP_MEM(x,s)	(vga_base + (x))
 
diff --git a/arch/arm/include/asm/vmlinux.lds.h b/arch/arm/include/asm/vmlinux.lds.h
index fad45c884e98..0341973e30e1 100644
--- a/arch/arm/include/asm/vmlinux.lds.h
+++ b/arch/arm/include/asm/vmlinux.lds.h
@@ -19,7 +19,7 @@
 #endif
 
 #ifdef CONFIG_MMU
-#define ARM_MMU_KEEP(x)		x
+#define ARM_MMU_KEEP(x)		KEEP(x)
 #define ARM_MMU_DISCARD(x)
 #else
 #define ARM_MMU_KEEP(x)
@@ -34,6 +34,12 @@
 #define NOCROSSREFS
 #endif
 
+#ifdef CONFIG_LD_CAN_USE_KEEP_IN_OVERLAY
+#define OVERLAY_KEEP(x)		KEEP(x)
+#else
+#define OVERLAY_KEEP(x)		x
+#endif
+
 /* Set start/end symbol names to the LMA for the section */
 #define ARM_LMA(sym, section)						\
 	sym##_start = LOADADDR(section);				\
@@ -42,7 +48,7 @@
 #define PROC_INFO							\
 		. = ALIGN(4);						\
 		__proc_info_begin = .;					\
-		*(.proc.info.init)					\
+		KEEP(*(.proc.info.init))				\
 		__proc_info_end = .;
 
 #define IDMAP_TEXT							\
@@ -96,7 +102,6 @@
 		SOFTIRQENTRY_TEXT					\
 		TEXT_TEXT						\
 		SCHED_TEXT						\
-		CPUIDLE_TEXT						\
 		LOCK_TEXT						\
 		KPROBES_TEXT						\
 		ARM_STUBS_TEXT						\
@@ -126,13 +131,13 @@
 	__vectors_lma = .;						\
 	OVERLAY 0xffff0000 : NOCROSSREFS AT(__vectors_lma) {		\
 		.vectors {						\
-			*(.vectors)					\
+			OVERLAY_KEEP(*(.vectors))			\
 		}							\
 		.vectors.bhb.loop8 {					\
-			*(.vectors.bhb.loop8)				\
+			OVERLAY_KEEP(*(.vectors.bhb.loop8))		\
 		}							\
 		.vectors.bhb.bpiall {					\
-			*(.vectors.bhb.bpiall)				\
+			OVERLAY_KEEP(*(.vectors.bhb.bpiall))		\
 		}							\
 	}								\
 	ARM_LMA(__vectors, .vectors);					\
diff --git a/arch/arm/include/asm/word-at-a-time.h b/arch/arm/include/asm/word-at-a-time.h
index 352ab213520d..5023f98d8293 100644
--- a/arch/arm/include/asm/word-at-a-time.h
+++ b/arch/arm/include/asm/word-at-a-time.h
@@ -8,7 +8,8 @@
  * Little-endian word-at-a-time zero byte handling.
  * Heavily based on the x86 algorithm.
  */
-#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/wordpart.h>
 
 struct word_at_a_time {
 	const unsigned long one_bits, high_bits;
@@ -66,7 +67,7 @@ static inline unsigned long find_zero(unsigned long mask)
  */
 static inline unsigned long load_unaligned_zeropad(const void *addr)
 {
-	unsigned long ret, offset;
+	unsigned long ret, tmp;
 
 	/* Load word from unaligned pointer addr */
 	asm(
@@ -74,9 +75,9 @@ static inline unsigned long load_unaligned_zeropad(const void *addr)
 	"2:\n"
 	"	.pushsection .text.fixup,\"ax\"\n"
 	"	.align 2\n"
-	"3:	and	%1, %2, #0x3\n"
-	"	bic	%2, %2, #0x3\n"
-	"	ldr	%0, [%2]\n"
+	"3:	bic	%1, %2, #0x3\n"
+	"	ldr	%0, [%1]\n"
+	"	and	%1, %2, #0x3\n"
 	"	lsl	%1, %1, #0x3\n"
 #ifndef __ARMEB__
 	"	lsr	%0, %0, %1\n"
@@ -89,7 +90,7 @@ static inline unsigned long load_unaligned_zeropad(const void *addr)
 	"	.align	3\n"
 	"	.long	1b, 3b\n"
 	"	.popsection"
-	: "=&r" (ret), "=&r" (offset)
+	: "=&r" (ret), "=&r" (tmp)
 	: "r" (addr), "Qo" (*(unsigned long *)addr));
 
 	return ret;
diff --git a/arch/arm/include/asm/xor.h b/arch/arm/include/asm/xor.h
index 669cad5194d3..934b549905f5 100644
--- a/arch/arm/include/asm/xor.h
+++ b/arch/arm/include/asm/xor.h
@@ -51,7 +51,7 @@ xor_arm4regs_2(unsigned long bytes, unsigned long * __restrict p1,
 	register unsigned int a1 __asm__("r4");
 	register unsigned int a2 __asm__("r5");
 	register unsigned int a3 __asm__("r6");
-	register unsigned int a4 __asm__("r7");
+	register unsigned int a4 __asm__("r10");
 	register unsigned int b1 __asm__("r8");
 	register unsigned int b2 __asm__("r9");
 	register unsigned int b3 __asm__("ip");
@@ -73,7 +73,7 @@ xor_arm4regs_3(unsigned long bytes, unsigned long * __restrict p1,
 	register unsigned int a1 __asm__("r4");
 	register unsigned int a2 __asm__("r5");
 	register unsigned int a3 __asm__("r6");
-	register unsigned int a4 __asm__("r7");
+	register unsigned int a4 __asm__("r10");
 	register unsigned int b1 __asm__("r8");
 	register unsigned int b2 __asm__("r9");
 	register unsigned int b3 __asm__("ip");
diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S
index f6175e6e28cd..3f7d68740ed4 100644
--- a/arch/arm/include/debug/brcmstb.S
+++ b/arch/arm/include/debug/brcmstb.S
@@ -27,6 +27,7 @@
 #define UARTA_72165		UARTA_7278
 #define UARTA_7364		REG_PHYS_ADDR(0x40b000)
 #define UARTA_7366		UARTA_7364
+#define UARTA_74165		UARTA_7278
 #define UARTA_74371		REG_PHYS_ADDR(0x406b00)
 #define UARTA_7439		REG_PHYS_ADDR(0x40a900)
 #define UARTA_7445		REG_PHYS_ADDR(0x40ab00)
@@ -88,9 +89,10 @@ ARM_BE8(	rev	\rv, \rv )
 30:		checkuart(\rp, \rv, 0x72780000, 7278)
 31:		checkuart(\rp, \rv, 0x73640000, 7364)
 32:		checkuart(\rp, \rv, 0x73660000, 7366)
-33:		checkuart(\rp, \rv, 0x07437100, 74371)
-34:		checkuart(\rp, \rv, 0x74390000, 7439)
-35:		checkuart(\rp, \rv, 0x74450000, 7445)
+33:		checkuart(\rp, \rv, 0x07416500, 74165)
+34:		checkuart(\rp, \rv, 0x07437100, 74371)
+35:		checkuart(\rp, \rv, 0x74390000, 7439)
+36:		checkuart(\rp, \rv, 0x74450000, 7445)
 
 		/* No valid UART found */
 90:		mov	\rp, #0
diff --git a/arch/arm/include/debug/s3c24xx.S b/arch/arm/include/debug/s3c24xx.S
index af873b526677..7ab5e577cd42 100644
--- a/arch/arm/include/debug/s3c24xx.S
+++ b/arch/arm/include/debug/s3c24xx.S
@@ -28,16 +28,6 @@
 		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
 	.endm
 
-/* Select the correct implementation depending on the configuration. The
- * S3C2440 will get selected by default, as these are the most widely
- * used variants of these
-*/
-
-#if defined(CONFIG_DEBUG_S3C2410_UART)
-#define fifo_full  fifo_full_s3c2410
-#define fifo_level fifo_level_s3c2410
-#endif
-
 /* include the reset of the code which will do the work */
 
 #include <debug/samsung.S>
diff --git a/arch/arm/include/uapi/asm/hwcap.h b/arch/arm/include/uapi/asm/hwcap.h
index 990199d8b7c6..6b2023e39b6f 100644
--- a/arch/arm/include/uapi/asm/hwcap.h
+++ b/arch/arm/include/uapi/asm/hwcap.h
@@ -28,6 +28,12 @@
 #define HWCAP_IDIV	(HWCAP_IDIVA | HWCAP_IDIVT)
 #define HWCAP_LPAE	(1 << 20)
 #define HWCAP_EVTSTRM	(1 << 21)
+#define HWCAP_FPHP	(1 << 22)
+#define HWCAP_ASIMDHP	(1 << 23)
+#define HWCAP_ASIMDDP	(1 << 24)
+#define HWCAP_ASIMDFHM	(1 << 25)
+#define HWCAP_ASIMDBF16	(1 << 26)
+#define HWCAP_I8MM	(1 << 27)
 
 /*
  * HWCAP2 flags - for elf_hwcap2 (in kernel) and AT_HWCAP2
@@ -37,5 +43,7 @@
 #define HWCAP2_SHA1	(1 << 2)
 #define HWCAP2_SHA2	(1 << 3)
 #define HWCAP2_CRC32	(1 << 4)
+#define HWCAP2_SB	(1 << 5)
+#define HWCAP2_SSBS	(1 << 6)
 
 #endif /* _UAPI__ASMARM_HWCAP_H */
diff --git a/arch/arm/include/uapi/asm/setup.h b/arch/arm/include/uapi/asm/setup.h
index 25ceda63b284..8e50e034fec7 100644
--- a/arch/arm/include/uapi/asm/setup.h
+++ b/arch/arm/include/uapi/asm/setup.h
@@ -9,7 +9,7 @@
  * published by the Free Software Foundation.
  *
  *  Structure passed to kernel to tell it about the
- *  hardware it's running on.  See Documentation/arm/setup.rst
+ *  hardware it's running on.  See Documentation/arch/arm/setup.rst
  *  for more info.
  */
 #ifndef _UAPI__ASMARM_SETUP_H
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 553866751e1a..afc9de7ef9a1 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -40,12 +40,12 @@ obj-y		+= entry-armv.o
 endif
 
 obj-$(CONFIG_MMU)		+= bugs.o
+obj-$(CONFIG_OF)		+= cacheinfo.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
 obj-$(CONFIG_FIQ)		+= fiq.o fiqasm.o
 obj-$(CONFIG_MODULES)		+= armksyms.o module.o
 obj-$(CONFIG_ARM_MODULE_PLTS)	+= module-plts.o
-obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
 obj-$(CONFIG_ARM_CPU_SUSPEND)	+= sleep.o suspend.o
 obj-$(CONFIG_HIBERNATION)	+= hibernate.o
@@ -60,7 +60,8 @@ obj-$(CONFIG_FUNCTION_TRACER)	+= entry-ftrace.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o insn.o patch.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o insn.o patch.o
 obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o insn.o patch.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_KEXEC_CORE)	+= machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_VMCORE_INFO)	+= vmcore_info.o
 # Main staffs in KPROBES are in arch/arm/probes/ .
 obj-$(CONFIG_KPROBES)		+= patch.o insn.o
 obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
@@ -71,25 +72,20 @@ obj-$(CONFIG_HAVE_TCM)		+= tcm.o
 obj-$(CONFIG_OF)		+= devtree.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_SWP_EMULATE)	+= swp_emulate.o
-CFLAGS_swp_emulate.o		:= -Wa,-march=armv7-a
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
 
 obj-$(CONFIG_CPU_XSCALE)	+= xscale-cp0.o
 obj-$(CONFIG_CPU_XSC3)		+= xscale-cp0.o
 obj-$(CONFIG_CPU_MOHAWK)	+= xscale-cp0.o
-obj-$(CONFIG_CPU_PJ4)		+= pj4-cp0.o
-obj-$(CONFIG_CPU_PJ4B)		+= pj4-cp0.o
 obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_regs.o perf_callchain.o
-obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event_xscale.o perf_event_v6.o \
-				   perf_event_v7.o
 AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
 obj-$(CONFIG_ARM_CPU_TOPOLOGY)  += topology.o
 obj-$(CONFIG_VDSO)		+= vdso.o
 obj-$(CONFIG_EFI)		+= efi.o
 obj-$(CONFIG_PARAVIRT)	+= paravirt.o
 
-head-y			:= head$(MMUEXT).o
+obj-y			+= head$(MMUEXT).o
 obj-$(CONFIG_DEBUG_LL)	+= debug.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_ARM_PATCH_PHYS_VIRT)	+= phys2virt.o
@@ -100,7 +96,6 @@ CFLAGS_head-inflate-data.o := $(call cc-option,-Wframe-larger-than=10240)
 obj-$(CONFIG_XIP_DEFLATED_DATA) += head-inflate-data.o
 
 obj-$(CONFIG_ARM_VIRT_EXT)	+= hyp-stub.o
-AFLAGS_hyp-stub.o		:=-Wa,-march=armv7-a
 ifeq ($(CONFIG_ARM_PSCI),y)
 obj-$(CONFIG_SMP)		+= psci_smp.o
 endif
@@ -109,4 +104,4 @@ obj-$(CONFIG_HAVE_ARM_SMCCC)	+= smccc-call.o
 
 obj-$(CONFIG_GENERIC_CPU_VULNERABILITIES) += spectre.o
 
-extra-y := $(head-y) vmlinux.lds
+always-$(KBUILD_BUILTIN) := vmlinux.lds
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 2c8d76fd7c66..2101938d27fc 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -7,6 +7,8 @@
  * This code generates raw asm output which is post-processed to extract
  * and format the required data.
  */
+#define COMPILE_OFFSETS
+
 #include <linux/compiler.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -17,14 +19,16 @@
 #include <asm/glue-pf.h>
 #include <asm/mach/arch.h>
 #include <asm/thread_info.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/mpu.h>
 #include <asm/procinfo.h>
 #include <asm/suspend.h>
-#include <asm/vdso_datapage.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <linux/kbuild.h>
 #include <linux/arm-smccc.h>
+
+#include <vdso/datapage.h>
+
 #include "signal.h"
 
 /*
@@ -47,7 +51,6 @@ int main(void)
   DEFINE(TI_CPU_DOMAIN,		offsetof(struct thread_info, cpu_domain));
   DEFINE(TI_CPU_SAVE,		offsetof(struct thread_info, cpu_context));
   DEFINE(TI_ABI_SYSCALL,	offsetof(struct thread_info, abi_syscall));
-  DEFINE(TI_USED_CP,		offsetof(struct thread_info, used_cp));
   DEFINE(TI_TP_VALUE,		offsetof(struct thread_info, tp_value));
   DEFINE(TI_FPSTATE,		offsetof(struct thread_info, fpstate));
 #ifdef CONFIG_VFP
@@ -56,6 +59,7 @@ int main(void)
   DEFINE(VFP_CPU,		offsetof(union vfp_state, hard.cpu));
 #endif
 #endif
+  DEFINE(SOFTIRQ_DISABLE_OFFSET,SOFTIRQ_DISABLE_OFFSET);
 #ifdef CONFIG_ARM_THUMBEE
   DEFINE(TI_THUMBEE_STATE,	offsetof(struct thread_info, thumbee_state));
 #endif
@@ -83,6 +87,7 @@ int main(void)
   DEFINE(S_OLD_R0,		offsetof(struct pt_regs, ARM_ORIG_r0));
   DEFINE(PT_REGS_SIZE,		sizeof(struct pt_regs));
   DEFINE(SVC_DACR,		offsetof(struct svc_pt_regs, dacr));
+  DEFINE(SVC_TTBCR,		offsetof(struct svc_pt_regs, ttbcr));
   DEFINE(SVC_REGS_SIZE,		sizeof(struct svc_pt_regs));
   BLANK();
   DEFINE(SIGFRAME_RC3_OFFSET,	offsetof(struct sigframe, retcode[3]));
@@ -150,10 +155,6 @@ int main(void)
   DEFINE(CACHE_WRITEBACK_ORDER, __CACHE_WRITEBACK_ORDER);
   DEFINE(CACHE_WRITEBACK_GRANULE, __CACHE_WRITEBACK_GRANULE);
   BLANK();
-#ifdef CONFIG_VDSO
-  DEFINE(VDSO_DATA_SIZE,	sizeof(union vdso_data_store));
-#endif
-  BLANK();
 #ifdef CONFIG_ARM_MPU
   DEFINE(MPU_RNG_INFO_RNGS,	offsetof(struct mpu_rgn_info, rgns));
   DEFINE(MPU_RNG_INFO_USED,	offsetof(struct mpu_rgn_info, used));
diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c
index 373b61f9a4f0..4ec591bde3df 100644
--- a/arch/arm/kernel/atags_parse.c
+++ b/arch/arm/kernel/atags_parse.c
@@ -69,18 +69,18 @@ static int __init parse_tag_mem32(const struct tag *tag)
 
 __tagtable(ATAG_MEM, parse_tag_mem32);
 
-#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
+#if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_VGA_CONSOLE)
 static int __init parse_tag_videotext(const struct tag *tag)
 {
-	screen_info.orig_x            = tag->u.videotext.x;
-	screen_info.orig_y            = tag->u.videotext.y;
-	screen_info.orig_video_page   = tag->u.videotext.video_page;
-	screen_info.orig_video_mode   = tag->u.videotext.video_mode;
-	screen_info.orig_video_cols   = tag->u.videotext.video_cols;
-	screen_info.orig_video_ega_bx = tag->u.videotext.video_ega_bx;
-	screen_info.orig_video_lines  = tag->u.videotext.video_lines;
-	screen_info.orig_video_isVGA  = tag->u.videotext.video_isvga;
-	screen_info.orig_video_points = tag->u.videotext.video_points;
+	vgacon_screen_info.orig_x            = tag->u.videotext.x;
+	vgacon_screen_info.orig_y            = tag->u.videotext.y;
+	vgacon_screen_info.orig_video_page   = tag->u.videotext.video_page;
+	vgacon_screen_info.orig_video_mode   = tag->u.videotext.video_mode;
+	vgacon_screen_info.orig_video_cols   = tag->u.videotext.video_cols;
+	vgacon_screen_info.orig_video_ega_bx = tag->u.videotext.video_ega_bx;
+	vgacon_screen_info.orig_video_lines  = tag->u.videotext.video_lines;
+	vgacon_screen_info.orig_video_isVGA  = tag->u.videotext.video_isvga;
+	vgacon_screen_info.orig_video_points = tag->u.videotext.video_points;
 	return 0;
 }
 
@@ -127,7 +127,7 @@ static int __init parse_tag_cmdline(const struct tag *tag)
 #elif defined(CONFIG_CMDLINE_FORCE)
 	pr_warn("Ignoring tag cmdline (using the default kernel command line)\n");
 #else
-	strlcpy(default_command_line, tag->u.cmdline.cmdline,
+	strscpy(default_command_line, tag->u.cmdline.cmdline,
 		COMMAND_LINE_SIZE);
 #endif
 	return 0;
@@ -224,7 +224,7 @@ setup_machine_tags(void *atags_vaddr, unsigned int machine_nr)
 	}
 
 	/* parse_early_param needs a boot_command_line */
-	strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
+	strscpy(boot_command_line, from, COMMAND_LINE_SIZE);
 
 	return mdesc;
 }
diff --git a/arch/arm/kernel/atags_proc.c b/arch/arm/kernel/atags_proc.c
index 3ec2afe78423..cd09f8ab93e3 100644
--- a/arch/arm/kernel/atags_proc.c
+++ b/arch/arm/kernel/atags_proc.c
@@ -7,7 +7,7 @@
 
 struct buffer {
 	size_t size;
-	char data[];
+	char data[] __counted_by(size);
 };
 
 static ssize_t atags_read(struct file *file, char __user *buf,
@@ -54,7 +54,7 @@ static int __init init_atags_procfs(void)
 
 	WARN_ON(tag->hdr.tag != ATAG_NONE);
 
-	b = kmalloc(sizeof(*b) + size, GFP_KERNEL);
+	b = kmalloc(struct_size(b, data, size), GFP_KERNEL);
 	if (!b)
 		goto nomem;
 
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index e7ef2b5bea9c..b5793e8fbdc1 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/string_choices.h>
 #include <linux/init.h>
 #include <linux/io.h>
 
@@ -142,15 +143,15 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_89C940F,
  */
 static void pci_fixup_dec21285(struct pci_dev *dev)
 {
-	int i;
-
 	if (dev->devfn == 0) {
+		struct resource *r;
+
 		dev->class &= 0xff;
 		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
-		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
+		pci_dev_for_each_resource(dev, r) {
+			r->start = 0;
+			r->end = 0;
+			r->flags = 0;
 		}
 	}
 }
@@ -162,13 +163,11 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, pci_fixup_d
 static void pci_fixup_ide_bases(struct pci_dev *dev)
 {
 	struct resource *r;
-	int i;
 
 	if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
 		return;
 
-	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-		r = dev->resource + i;
+	pci_dev_for_each_resource(dev, r) {
 		if ((r->start & ~0x80) == 0x374) {
 			r->start |= 2;
 			r->end = r->start;
@@ -339,8 +338,8 @@ void pcibios_fixup_bus(struct pci_bus *bus)
 	/*
 	 * Report what we did for this bus
 	 */
-	pr_info("PCI: bus%d: Fast back to back transfers %sabled\n",
-		bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
+	pr_info("PCI: bus%d: Fast back to back transfers %s\n",
+		bus->number, str_enabled_disabled(features & PCI_COMMAND_FAST_BACK));
 }
 EXPORT_SYMBOL(pcibios_fixup_bus);
 
diff --git a/arch/arm/kernel/bugs.c b/arch/arm/kernel/bugs.c
index 14c8dbbb7d2d..087bce6ec8e9 100644
--- a/arch/arm/kernel/bugs.c
+++ b/arch/arm/kernel/bugs.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/init.h>
+#include <linux/cpu.h>
 #include <asm/bugs.h>
 #include <asm/proc-fns.h>
 
@@ -11,7 +12,7 @@ void check_other_bugs(void)
 #endif
 }
 
-void __init check_bugs(void)
+void __init arch_cpu_finalize_init(void)
 {
 	check_writebuffer_bugs();
 	check_other_bugs();
diff --git a/arch/arm/kernel/cacheinfo.c b/arch/arm/kernel/cacheinfo.c
new file mode 100644
index 000000000000..e1469b641780
--- /dev/null
+++ b/arch/arm/kernel/cacheinfo.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ARM cacheinfo support
+ *
+ *  Copyright (C) 2023 Linaro Ltd.
+ *  Copyright (C) 2015 ARM Ltd.
+ *  All Rights Reserved
+ */
+
+#include <linux/bitfield.h>
+#include <linux/cacheinfo.h>
+#include <linux/of.h>
+
+#include <asm/cachetype.h>
+#include <asm/cputype.h>
+#include <asm/system_info.h>
+
+/* Ctypen, bits[3(n - 1) + 2 : 3(n - 1)], for n = 1 to 7 */
+#define CLIDR_CTYPE_SHIFT(level)	(3 * (level - 1))
+#define CLIDR_CTYPE_MASK(level)		(7 << CLIDR_CTYPE_SHIFT(level))
+#define CLIDR_CTYPE(clidr, level)	\
+	(((clidr) & CLIDR_CTYPE_MASK(level)) >> CLIDR_CTYPE_SHIFT(level))
+
+#define MAX_CACHE_LEVEL			7	/* Max 7 level supported */
+
+#define CTR_FORMAT_MASK	GENMASK(31, 29)
+#define CTR_FORMAT_ARMV6 0
+#define CTR_FORMAT_ARMV7 4
+#define CTR_CWG_MASK	GENMASK(27, 24)
+#define CTR_DSIZE_LEN_MASK GENMASK(13, 12)
+#define CTR_ISIZE_LEN_MASK GENMASK(1, 0)
+
+/* Also valid for v7m */
+static inline int cache_line_size_cp15(void)
+{
+	u32 ctr = read_cpuid_cachetype();
+	u32 format = FIELD_GET(CTR_FORMAT_MASK, ctr);
+
+	if (format == CTR_FORMAT_ARMV7) {
+		u32 cwg = FIELD_GET(CTR_CWG_MASK, ctr);
+
+		return cwg ? 4 << cwg : ARCH_DMA_MINALIGN;
+	} else if (WARN_ON_ONCE(format != CTR_FORMAT_ARMV6)) {
+		return ARCH_DMA_MINALIGN;
+	}
+
+	return 8 << max(FIELD_GET(CTR_ISIZE_LEN_MASK, ctr),
+			FIELD_GET(CTR_DSIZE_LEN_MASK, ctr));
+}
+
+int cache_line_size(void)
+{
+	if (coherency_max_size != 0)
+		return coherency_max_size;
+
+	/* CP15 is optional / implementation defined before ARMv6 */
+	if (cpu_architecture() < CPU_ARCH_ARMv6)
+		return ARCH_DMA_MINALIGN;
+
+	return cache_line_size_cp15();
+}
+EXPORT_SYMBOL_GPL(cache_line_size);
+
+static inline enum cache_type get_cache_type(int level)
+{
+	u32 clidr;
+
+	if (level > MAX_CACHE_LEVEL)
+		return CACHE_TYPE_NOCACHE;
+
+	clidr = read_clidr();
+
+	return CLIDR_CTYPE(clidr, level);
+}
+
+static void ci_leaf_init(struct cacheinfo *this_leaf,
+			 enum cache_type type, unsigned int level)
+{
+	this_leaf->level = level;
+	this_leaf->type = type;
+}
+
+static int detect_cache_level(unsigned int *level_p, unsigned int *leaves_p)
+{
+	unsigned int ctype, level, leaves;
+	u32 ctr, format;
+
+	/* CLIDR is not present before ARMv7/v7m */
+	if (cpu_architecture() < CPU_ARCH_ARMv7)
+		return -EOPNOTSUPP;
+
+	/* Don't try reading CLIDR if CTR declares old format */
+	ctr = read_cpuid_cachetype();
+	format = FIELD_GET(CTR_FORMAT_MASK, ctr);
+	if (format != CTR_FORMAT_ARMV7)
+		return -EOPNOTSUPP;
+
+	for (level = 1, leaves = 0; level <= MAX_CACHE_LEVEL; level++) {
+		ctype = get_cache_type(level);
+		if (ctype == CACHE_TYPE_NOCACHE) {
+			level--;
+			break;
+		}
+		/* Separate instruction and data caches */
+		leaves += (ctype == CACHE_TYPE_SEPARATE) ? 2 : 1;
+	}
+
+	*level_p = level;
+	*leaves_p = leaves;
+
+	return 0;
+}
+
+int early_cache_level(unsigned int cpu)
+{
+	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
+
+	return detect_cache_level(&this_cpu_ci->num_levels, &this_cpu_ci->num_leaves);
+}
+
+int init_cache_level(unsigned int cpu)
+{
+	unsigned int level, leaves;
+	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
+	int fw_level;
+	int ret;
+
+	ret = detect_cache_level(&level, &leaves);
+	if (ret)
+		return ret;
+
+	fw_level = of_find_last_cache_level(cpu);
+
+	if (level < fw_level) {
+		/*
+		 * some external caches not specified in CLIDR_EL1
+		 * the information may be available in the device tree
+		 * only unified external caches are considered here
+		 */
+		leaves += (fw_level - level);
+		level = fw_level;
+	}
+
+	this_cpu_ci->num_levels = level;
+	this_cpu_ci->num_leaves = leaves;
+	return 0;
+}
+
+int populate_cache_leaves(unsigned int cpu)
+{
+	unsigned int level, idx;
+	enum cache_type type;
+	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
+	struct cacheinfo *this_leaf = this_cpu_ci->info_list;
+	unsigned int arch = cpu_architecture();
+
+	/* CLIDR is not present before ARMv7/v7m */
+	if (arch < CPU_ARCH_ARMv7)
+		return -EOPNOTSUPP;
+
+	for (idx = 0, level = 1; level <= this_cpu_ci->num_levels &&
+	     idx < this_cpu_ci->num_leaves; idx++, level++) {
+		type = get_cache_type(level);
+		if (type == CACHE_TYPE_SEPARATE) {
+			ci_leaf_init(this_leaf++, CACHE_TYPE_DATA, level);
+			ci_leaf_init(this_leaf++, CACHE_TYPE_INST, level);
+		} else {
+			ci_leaf_init(this_leaf++, type, level);
+		}
+	}
+
+	return 0;
+}
diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c
index e1684623e1b2..fba1f8bb03b5 100644
--- a/arch/arm/kernel/cpuidle.c
+++ b/arch/arm/kernel/cpuidle.c
@@ -5,7 +5,6 @@
 
 #include <linux/cpuidle.h>
 #include <linux/of.h>
-#include <linux/of_device.h>
 #include <asm/cpuidle.h>
 
 extern struct of_cpuidle_method __cpuidle_method_of_table[];
@@ -26,8 +25,8 @@ static struct cpuidle_ops cpuidle_ops[NR_CPUS] __ro_after_init;
  *
  * Returns the index passed as parameter
  */
-int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
-		struct cpuidle_driver *drv, int index)
+__cpuidle int arm_cpuidle_simple_enter(struct cpuidle_device *dev, struct
+				       cpuidle_driver *drv, int index)
 {
 	cpu_do_idle();
 
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index 02839d8b6202..3b78966e750a 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -13,7 +13,6 @@
 #include <linux/of.h>
 #include <linux/of_fdt.h>
 #include <linux/of_irq.h>
-#include <linux/of_platform.h>
 #include <linux/smp.h>
 
 #include <asm/cputype.h>
@@ -194,16 +193,14 @@ const struct machine_desc * __init setup_machine_fdt(void *dt_virt)
 {
 	const struct machine_desc *mdesc, *mdesc_best = NULL;
 
-#if defined(CONFIG_ARCH_MULTIPLATFORM) || defined(CONFIG_ARM_SINGLE_ARMV7M)
 	DT_MACHINE_START(GENERIC_DT, "Generic DT based system")
 		.l2c_aux_val = 0x0,
 		.l2c_aux_mask = ~0x0,
 	MACHINE_END
 
 	mdesc_best = &__mach_desc_GENERIC_DT;
-#endif
 
-	if (!dt_virt || !early_init_dt_verify(dt_virt))
+	if (!dt_virt || !early_init_dt_verify(dt_virt, __pa(dt_virt)))
 		return NULL;
 
 	mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach);
diff --git a/arch/arm/kernel/efi.c b/arch/arm/kernel/efi.c
index e57dbcc89123..6f9ec7d28a71 100644
--- a/arch/arm/kernel/efi.c
+++ b/arch/arm/kernel/efi.c
@@ -4,6 +4,9 @@
  */
 
 #include <linux/efi.h>
+#include <linux/memblock.h>
+#include <linux/screen_info.h>
+
 #include <asm/efi.h>
 #include <asm/mach/map.h>
 #include <asm/mmu_context.h>
@@ -22,7 +25,8 @@ static int __init set_permissions(pte_t *ptep, unsigned long addr, void *data)
 }
 
 int __init efi_set_mapping_permissions(struct mm_struct *mm,
-				       efi_memory_desc_t *md)
+				       efi_memory_desc_t *md,
+				       bool ignored)
 {
 	unsigned long base, size;
 
@@ -70,6 +74,57 @@ int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md)
 	 * If stricter permissions were specified, apply them now.
 	 */
 	if (md->attribute & (EFI_MEMORY_RO | EFI_MEMORY_XP))
-		return efi_set_mapping_permissions(mm, md);
+		return efi_set_mapping_permissions(mm, md, false);
 	return 0;
 }
+
+static unsigned long __initdata cpu_state_table = EFI_INVALID_TABLE_ADDR;
+
+const efi_config_table_type_t efi_arch_tables[] __initconst = {
+	{LINUX_EFI_ARM_CPU_STATE_TABLE_GUID, &cpu_state_table},
+	{}
+};
+
+static void __init load_cpu_state_table(void)
+{
+	if (cpu_state_table != EFI_INVALID_TABLE_ADDR) {
+		struct efi_arm_entry_state *state;
+		bool dump_state = true;
+
+		state = early_memremap_ro(cpu_state_table,
+					  sizeof(struct efi_arm_entry_state));
+		if (state == NULL) {
+			pr_warn("Unable to map CPU entry state table.\n");
+			return;
+		}
+
+		if ((state->sctlr_before_ebs & 1) == 0)
+			pr_warn(FW_BUG "EFI stub was entered with MMU and Dcache disabled, please fix your firmware!\n");
+		else if ((state->sctlr_after_ebs & 1) == 0)
+			pr_warn(FW_BUG "ExitBootServices() returned with MMU and Dcache disabled, please fix your firmware!\n");
+		else
+			dump_state = false;
+
+		if (dump_state || efi_enabled(EFI_DBG)) {
+			pr_info("CPSR at EFI stub entry        : 0x%08x\n",
+				state->cpsr_before_ebs);
+			pr_info("SCTLR at EFI stub entry       : 0x%08x\n",
+				state->sctlr_before_ebs);
+			pr_info("CPSR after ExitBootServices() : 0x%08x\n",
+				state->cpsr_after_ebs);
+			pr_info("SCTLR after ExitBootServices(): 0x%08x\n",
+				state->sctlr_after_ebs);
+		}
+		early_memunmap(state, sizeof(struct efi_arm_entry_state));
+	}
+}
+
+void __init arm_efi_init(void)
+{
+	efi_init();
+
+	/* ARM does not permit early mappings to persist across paging_init() */
+	efi_memmap_unmap();
+
+	load_cpu_state_table();
+}
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index c39303e5c234..ef6a657c8d13 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -15,7 +15,7 @@
 #include <linux/init.h>
 
 #include <asm/assembler.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/glue-df.h>
 #include <asm/glue-pf.h>
 #include <asm/vfpmacros.h>
@@ -25,10 +25,17 @@
 #include <asm/tls.h>
 #include <asm/system_info.h>
 #include <asm/uaccess-asm.h>
+#include <asm/kasan_def.h>
 
 #include "entry-header.S"
 #include <asm/probes.h>
 
+#ifdef CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION
+#define RELOC_TEXT_NONE .reloc  .text, R_ARM_NONE, .
+#else
+#define RELOC_TEXT_NONE
+#endif
+
 /*
  * Interrupt handling.
  */
@@ -446,258 +453,26 @@ ENDPROC(__irq_usr)
 __und_usr:
 	usr_entry uaccess=0
 
-	mov	r2, r4
-	mov	r3, r5
-
-	@ r2 = regs->ARM_pc, which is either 2 or 4 bytes ahead of the
-	@      faulting instruction depending on Thumb mode.
-	@ r3 = regs->ARM_cpsr
-	@
-	@ The emulation code returns using r9 if it has emulated the
-	@ instruction, or the more conventional lr if we are to treat
-	@ this as a real undefined instruction
-	@
-	badr	r9, ret_from_exception
-
 	@ IRQs must be enabled before attempting to read the instruction from
 	@ user space since that could cause a page/translation fault if the
 	@ page table was modified by another CPU.
 	enable_irq
 
-	tst	r3, #PSR_T_BIT			@ Thumb mode?
-	bne	__und_usr_thumb
-	sub	r4, r2, #4			@ ARM instr at LR - 4
-1:	ldrt	r0, [r4]
- ARM_BE8(rev	r0, r0)				@ little endian instruction
-
-	uaccess_disable ip
-
-	@ r0 = 32-bit ARM instruction which caused the exception
-	@ r2 = PC value for the following instruction (:= regs->ARM_pc)
-	@ r4 = PC value for the faulting instruction
-	@ lr = 32-bit undefined instruction function
-	badr	lr, __und_usr_fault_32
-	b	call_fpe
-
-__und_usr_thumb:
-	@ Thumb instruction
-	sub	r4, r2, #2			@ First half of thumb instr at LR - 2
-#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
-/*
- * Thumb-2 instruction handling.  Note that because pre-v6 and >= v6 platforms
- * can never be supported in a single kernel, this code is not applicable at
- * all when __LINUX_ARM_ARCH__ < 6.  This allows simplifying assumptions to be
- * made about .arch directives.
- */
-#if __LINUX_ARM_ARCH__ < 7
-/* If the target CPU may not be Thumb-2-capable, a run-time check is needed: */
-	ldr_va	r5, cpu_architecture
-	cmp	r5, #CPU_ARCH_ARMv7
-	blo	__und_usr_fault_16		@ 16bit undefined instruction
-/*
- * The following code won't get run unless the running CPU really is v7, so
- * coding round the lack of ldrht on older arches is pointless.  Temporarily
- * override the assembler target arch with the minimum required instead:
- */
-	.arch	armv6t2
+	tst	r5, #PSR_T_BIT			@ Thumb mode?
+	mov	r1, #2				@ set insn size to 2 for Thumb
+	bne	0f				@ handle as Thumb undef exception
+#ifdef CONFIG_FPE_NWFPE
+	adr	r9, ret_from_exception
+	bl	call_fpe			@ returns via R9 on success
 #endif
-2:	ldrht	r5, [r4]
-ARM_BE8(rev16	r5, r5)				@ little endian instruction
-	cmp	r5, #0xe800			@ 32bit instruction if xx != 0
-	blo	__und_usr_fault_16_pan		@ 16bit undefined instruction
-3:	ldrht	r0, [r2]
-ARM_BE8(rev16	r0, r0)				@ little endian instruction
+	mov	r1, #4				@ set insn size to 4 for ARM
+0:	mov	r0, sp
 	uaccess_disable ip
-	add	r2, r2, #2			@ r2 is PC + 2, make it PC + 4
-	str	r2, [sp, #S_PC]			@ it's a 2x16bit instr, update
-	orr	r0, r0, r5, lsl #16
-	badr	lr, __und_usr_fault_32
-	@ r0 = the two 16-bit Thumb instructions which caused the exception
-	@ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc)
-	@ r4 = PC value for the first 16-bit Thumb instruction
-	@ lr = 32bit undefined instruction function
-
-#if __LINUX_ARM_ARCH__ < 7
-/* If the target arch was overridden, change it back: */
-#ifdef CONFIG_CPU_32v6K
-	.arch	armv6k
-#else
-	.arch	armv6
-#endif
-#endif /* __LINUX_ARM_ARCH__ < 7 */
-#else /* !(CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7) */
-	b	__und_usr_fault_16
-#endif
+	bl	__und_fault
+	b	ret_from_exception
  UNWIND(.fnend)
 ENDPROC(__und_usr)
 
-/*
- * The out of line fixup for the ldrt instructions above.
- */
-	.pushsection .text.fixup, "ax"
-	.align	2
-4:	str     r4, [sp, #S_PC]			@ retry current instruction
-	ret	r9
-	.popsection
-	.pushsection __ex_table,"a"
-	.long	1b, 4b
-#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
-	.long	2b, 4b
-	.long	3b, 4b
-#endif
-	.popsection
-
-/*
- * Check whether the instruction is a co-processor instruction.
- * If yes, we need to call the relevant co-processor handler.
- *
- * Note that we don't do a full check here for the co-processor
- * instructions; all instructions with bit 27 set are well
- * defined.  The only instructions that should fault are the
- * co-processor instructions.  However, we have to watch out
- * for the ARM6/ARM7 SWI bug.
- *
- * NEON is a special case that has to be handled here. Not all
- * NEON instructions are co-processor instructions, so we have
- * to make a special case of checking for them. Plus, there's
- * five groups of them, so we have a table of mask/opcode pairs
- * to check against, and if any match then we branch off into the
- * NEON handler code.
- *
- * Emulators may wish to make use of the following registers:
- *  r0  = instruction opcode (32-bit ARM or two 16-bit Thumb)
- *  r2  = PC value to resume execution after successful emulation
- *  r9  = normal "successful" return address
- *  r10 = this threads thread_info structure
- *  lr  = unrecognised instruction return address
- * IRQs enabled, FIQs enabled.
- */
-	@
-	@ Fall-through from Thumb-2 __und_usr
-	@
-#ifdef CONFIG_NEON
-	get_thread_info r10			@ get current thread
-	adr	r6, .LCneon_thumb_opcodes
-	b	2f
-#endif
-call_fpe:
-	get_thread_info r10			@ get current thread
-#ifdef CONFIG_NEON
-	adr	r6, .LCneon_arm_opcodes
-2:	ldr	r5, [r6], #4			@ mask value
-	ldr	r7, [r6], #4			@ opcode bits matching in mask
-	cmp	r5, #0				@ end mask?
-	beq	1f
-	and	r8, r0, r5
-	cmp	r8, r7				@ NEON instruction?
-	bne	2b
-	mov	r7, #1
-	strb	r7, [r10, #TI_USED_CP + 10]	@ mark CP#10 as used
-	strb	r7, [r10, #TI_USED_CP + 11]	@ mark CP#11 as used
-	b	do_vfp				@ let VFP handler handle this
-1:
-#endif
-	tst	r0, #0x08000000			@ only CDP/CPRT/LDC/STC have bit 27
-	tstne	r0, #0x04000000			@ bit 26 set on both ARM and Thumb-2
-	reteq	lr
-	and	r8, r0, #0x00000f00		@ mask out CP number
-	mov	r7, #1
-	add	r6, r10, r8, lsr #8		@ add used_cp[] array offset first
-	strb	r7, [r6, #TI_USED_CP]		@ set appropriate used_cp[]
-#ifdef CONFIG_IWMMXT
-	@ Test if we need to give access to iWMMXt coprocessors
-	ldr	r5, [r10, #TI_FLAGS]
-	rsbs	r7, r8, #(1 << 8)		@ CP 0 or 1 only
-	movscs	r7, r5, lsr #(TIF_USING_IWMMXT + 1)
-	bcs	iwmmxt_task_enable
-#endif
- ARM(	add	pc, pc, r8, lsr #6	)
- THUMB(	lsr	r8, r8, #6		)
- THUMB(	add	pc, r8			)
-	nop
-
-	ret.w	lr				@ CP#0
-	W(b)	do_fpe				@ CP#1 (FPE)
-	W(b)	do_fpe				@ CP#2 (FPE)
-	ret.w	lr				@ CP#3
-	ret.w	lr				@ CP#4
-	ret.w	lr				@ CP#5
-	ret.w	lr				@ CP#6
-	ret.w	lr				@ CP#7
-	ret.w	lr				@ CP#8
-	ret.w	lr				@ CP#9
-#ifdef CONFIG_VFP
-	W(b)	do_vfp				@ CP#10 (VFP)
-	W(b)	do_vfp				@ CP#11 (VFP)
-#else
-	ret.w	lr				@ CP#10 (VFP)
-	ret.w	lr				@ CP#11 (VFP)
-#endif
-	ret.w	lr				@ CP#12
-	ret.w	lr				@ CP#13
-	ret.w	lr				@ CP#14 (Debug)
-	ret.w	lr				@ CP#15 (Control)
-
-#ifdef CONFIG_NEON
-	.align	6
-
-.LCneon_arm_opcodes:
-	.word	0xfe000000			@ mask
-	.word	0xf2000000			@ opcode
-
-	.word	0xff100000			@ mask
-	.word	0xf4000000			@ opcode
-
-	.word	0x00000000			@ mask
-	.word	0x00000000			@ opcode
-
-.LCneon_thumb_opcodes:
-	.word	0xef000000			@ mask
-	.word	0xef000000			@ opcode
-
-	.word	0xff100000			@ mask
-	.word	0xf9000000			@ opcode
-
-	.word	0x00000000			@ mask
-	.word	0x00000000			@ opcode
-#endif
-
-do_fpe:
-	add	r10, r10, #TI_FPSTATE		@ r10 = workspace
-	ldr_va	pc, fp_enter, tmp=r4		@ Call FP module USR entry point
-
-/*
- * The FP module is called with these registers set:
- *  r0  = instruction
- *  r2  = PC+4
- *  r9  = normal "successful" return address
- *  r10 = FP workspace
- *  lr  = unrecognised FP instruction return address
- */
-
-	.pushsection .data
-	.align	2
-ENTRY(fp_enter)
-	.word	no_fp
-	.popsection
-
-ENTRY(no_fp)
-	ret	lr
-ENDPROC(no_fp)
-
-__und_usr_fault_32:
-	mov	r1, #4
-	b	1f
-__und_usr_fault_16_pan:
-	uaccess_disable ip
-__und_usr_fault_16:
-	mov	r1, #2
-1:	mov	r0, sp
-	badr	lr, ret_from_exception
-	b	__und_fault
-ENDPROC(__und_usr_fault_32)
-ENDPROC(__und_usr_fault_16)
-
 	.align	5
 __pabt_usr:
 	usr_entry
@@ -787,6 +562,13 @@ ENTRY(__switch_to)
 	@ entries covering the vmalloc region.
 	@
 	ldr	r2, [ip]
+#ifdef CONFIG_KASAN_VMALLOC
+	@ Also dummy read from the KASAN shadow memory for the new stack if we
+	@ are using KASAN
+	mov_l	r2, KASAN_SHADOW_OFFSET
+	add	r2, r2, ip, lsr #KASAN_SHADOW_SCALE_SHIFT
+	ldr	r2, [r2]
+#endif
 #endif
 
 	@ When CONFIG_THREAD_INFO_IN_TASK=n, the update of SP itself is what
@@ -875,7 +657,7 @@ ENDPROC(__bad_stack)
  * existing ones.  This mechanism should be used only for things that are
  * really small and justified, and not be abused freely.
  *
- * See Documentation/arm/kernel_user_helpers.rst for formal definitions.
+ * See Documentation/arch/arm/kernel_user_helpers.rst for formal definitions.
  */
  THUMB(	.arm	)
 
@@ -1297,6 +1079,7 @@ vector_addrexcptn:
 	.globl	vector_fiq
 
 	.section .vectors, "ax", %progbits
+	RELOC_TEXT_NONE
 	W(b)	vector_rst
 	W(b)	vector_und
 ARM(	.reloc	., R_ARM_LDR_PC_G0, .L__vector_swi		)
@@ -1310,6 +1093,7 @@ THUMB(	.reloc	., R_ARM_THM_PC12, .L__vector_swi		)
 
 #ifdef CONFIG_HARDEN_BRANCH_HISTORY
 	.section .vectors.bhb.loop8, "ax", %progbits
+	RELOC_TEXT_NONE
 	W(b)	vector_rst
 	W(b)	vector_bhb_loop8_und
 ARM(	.reloc	., R_ARM_LDR_PC_G0, .L__vector_bhb_loop8_swi	)
@@ -1322,6 +1106,7 @@ THUMB(	.reloc	., R_ARM_THM_PC12, .L__vector_bhb_loop8_swi	)
 	W(b)	vector_bhb_loop8_fiq
 
 	.section .vectors.bhb.bpiall, "ax", %progbits
+	RELOC_TEXT_NONE
 	W(b)	vector_rst
 	W(b)	vector_bhb_bpiall_und
 ARM(	.reloc	., R_ARM_LDR_PC_G0, .L__vector_bhb_bpiall_swi	)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 405a607b754f..88336a1292bb 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -9,22 +9,13 @@
 #include <asm/unistd.h>
 #include <asm/ftrace.h>
 #include <asm/unwind.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #ifdef CONFIG_AEABI
 #include <asm/unistd-oabi.h>
 #endif
 
 	.equ	NR_syscalls, __NR_syscalls
 
-	.macro  arch_ret_to_user, tmp
-#ifdef CONFIG_ARCH_IOP32X
-	mrc	p15, 0, \tmp, c15, c1, 0
-	tst	\tmp, #(1 << 6)
-	bicne	\tmp, \tmp, #(1 << 6)
-	mcrne	p15, 0, \tmp, c15, c1, 0	@ Disable cp6 access
-#endif
-	.endm
-
 #include "entry-header.S"
 
 saved_psr	.req	r8
@@ -55,10 +46,6 @@ __ret_fast_syscall:
 	movs	r1, r1, lsl #16
 	bne	fast_work_pending
 
-
-	/* perform architecture specific actions before user return */
-	arch_ret_to_user r1
-
 	restore_user_regs fast = 1, offset = S_OFF
  UNWIND(.fnend		)
 ENDPROC(ret_fast_syscall)
@@ -103,6 +90,7 @@ slow_work_pending:
 	cmp	r0, #0
 	beq	no_work_pending
 	movlt	scno, #(__NR_restart_syscall - __NR_SYSCALL_BASE)
+	str	scno, [tsk, #TI_ABI_SYSCALL]	@ make sure tracers see update
 	ldmia	sp, {r0 - r6}			@ have to reload r0 - r6
 	b	local_restart			@ ... and off we go
 ENDPROC(ret_fast_syscall)
@@ -129,10 +117,11 @@ ENTRY(ret_to_user_from_irq)
 no_work_pending:
 	asm_trace_hardirqs_on save = 0
 
-	/* perform architecture specific actions before user return */
-	arch_ret_to_user r1
 	ct_user_enter save = 0
 
+#ifdef CONFIG_KSTACK_ERASE
+	bl	stackleak_erase_on_task_stack
+#endif
 	restore_user_regs fast = 0, offset = 0
 ENDPROC(ret_to_user_from_irq)
 ENDPROC(ret_to_user)
diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S
index 3e7bcaca5e07..e24ee559af81 100644
--- a/arch/arm/kernel/entry-ftrace.S
+++ b/arch/arm/kernel/entry-ftrace.S
@@ -257,11 +257,21 @@ ENDPROC(ftrace_graph_regs_caller)
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 ENTRY(return_to_handler)
-	stmdb	sp!, {r0-r3}
-	add	r0, sp, #16		@ sp at exit of instrumented routine
+	mov	ip, sp				@ sp at exit of instrumented routine
+	sub	sp, #PT_REGS_SIZE
+	str	r0, [sp, #S_R0]
+	str	r1, [sp, #S_R1]
+	str	r2, [sp, #S_R2]
+	str	r3, [sp, #S_R3]
+	str	ip, [sp, #S_FP]
+	mov	r0, sp
 	bl	ftrace_return_to_handler
-	mov	lr, r0			@ r0 has real ret addr
-	ldmia	sp!, {r0-r3}
+	mov	lr, r0				@ r0 has real ret addr
+	ldr	r3, [sp, #S_R3]
+	ldr	r2, [sp, #S_R2]
+	ldr	r1, [sp, #S_R1]
+	ldr	r0, [sp, #S_R0]
+	add	sp, sp, #PT_REGS_SIZE		@ restore stack pointer
 	ret	lr
 ENDPROC(return_to_handler)
 #endif
@@ -271,6 +281,10 @@ ENTRY(ftrace_stub)
 	ret	lr
 ENDPROC(ftrace_stub)
 
+ENTRY(ftrace_stub_graph)
+	ret	lr
+ENDPROC(ftrace_stub_graph)
+
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 	__INIT
diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S
index de8a60363c85..52bacf07ba16 100644
--- a/arch/arm/kernel/entry-v7m.S
+++ b/arch/arm/kernel/entry-v7m.S
@@ -6,7 +6,7 @@
  *
  * Low-level vector interface routines for the ARMv7-M architecture
  */
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/glue.h>
 #include <asm/thread_notify.h>
 #include <asm/v7m.h>
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index 98ca3e3fa847..d2c8e5313539 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -45,6 +45,7 @@
 #include <asm/cacheflush.h>
 #include <asm/cp15.h>
 #include <asm/fiq.h>
+#include <asm/mach/irq.h>
 #include <asm/irq.h>
 #include <asm/traps.h>
 
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index a0b6d1e3812f..845acf9ce21e 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -23,7 +23,7 @@
 #include <asm/insn.h>
 #include <asm/set_memory.h>
 #include <asm/stacktrace.h>
-#include <asm/patch.h>
+#include <asm/text-patching.h>
 
 /*
  * The compiler emitted profiling hook consists of
@@ -232,11 +232,24 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	unsigned long old;
 
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+err_out:
 		return;
 
 	if (IS_ENABLED(CONFIG_UNWINDER_FRAME_POINTER)) {
-		/* FP points one word below parent's top of stack */
-		frame_pointer += 4;
+		/*
+		 * Usually, the stack frames are contiguous in memory but cases
+		 * have been observed where the next stack frame does not live
+		 * at 'frame_pointer + 4' as this code used to assume.
+		 *
+		 * Instead, dereference the field in the stack frame that
+		 * stores the SP of the calling frame: to avoid unbounded
+		 * recursion, this cannot involve any ftrace instrumented
+		 * functions, so use the __get_kernel_nofault() primitive
+		 * directly.
+		 */
+		__get_kernel_nofault(&frame_pointer,
+				     (unsigned long *)(frame_pointer - 8),
+				     unsigned long, err_out);
 	} else {
 		struct stackframe frame = {
 			.fp = frame_pointer,
diff --git a/arch/arm/kernel/head-inflate-data.c b/arch/arm/kernel/head-inflate-data.c
index 89a52104d32a..225c0699a12c 100644
--- a/arch/arm/kernel/head-inflate-data.c
+++ b/arch/arm/kernel/head-inflate-data.c
@@ -8,16 +8,13 @@
 
 #include <linux/init.h>
 #include <linux/zutil.h>
+#include "head.h"
 
 /* for struct inflate_state */
 #include "../../../lib/zlib_inflate/inftrees.h"
 #include "../../../lib/zlib_inflate/inflate.h"
 #include "../../../lib/zlib_inflate/infutil.h"
 
-extern char __data_loc[];
-extern char _edata_loc[];
-extern char _sdata[];
-
 /*
  * This code is called very early during the boot process to decompress
  * the .data segment stored compressed in ROM. Therefore none of the global
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index 950bef83339f..b9d6818f1ee1 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -14,12 +14,11 @@
 #include <asm/assembler.h>
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/cp15.h>
 #include <asm/thread_info.h>
 #include <asm/v7m.h>
 #include <asm/mpu.h>
-#include <asm/page.h>
 
 /*
  * Kernel startup entry point.
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 29e2900178a1..f22c50d4bd41 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -17,7 +17,7 @@
 #include <asm/domain.h>
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/thread_info.h>
 
 #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING)
@@ -252,18 +252,23 @@ __create_page_tables:
 	 */
 	add	r0, r4, #KERNEL_OFFSET >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
 	ldr	r6, =(_end - 1)
+
+	/* For XIP, kernel_sec_start/kernel_sec_end are currently in RO memory */
+#ifndef CONFIG_XIP_KERNEL
 	adr_l	r5, kernel_sec_start		@ _pa(kernel_sec_start)
 #if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32
 	str	r8, [r5, #4]			@ Save physical start of kernel (BE)
 #else
 	str	r8, [r5]			@ Save physical start of kernel (LE)
 #endif
+#endif
 	orr	r3, r8, r7			@ Add the MMU flags
 	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ENTRY_ORDER)
 1:	str	r3, [r0], #1 << PMD_ENTRY_ORDER
 	add	r3, r3, #1 << SECTION_SHIFT
 	cmp	r0, r6
 	bls	1b
+#ifndef CONFIG_XIP_KERNEL
 	eor	r3, r3, r7			@ Remove the MMU flags
 	adr_l	r5, kernel_sec_end		@ _pa(kernel_sec_end)
 #if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32
@@ -271,8 +276,7 @@ __create_page_tables:
 #else
 	str	r3, [r5]			@ Save physical end of kernel (LE)
 #endif
-
-#ifdef CONFIG_XIP_KERNEL
+#else
 	/*
 	 * Map the kernel image separately as it is not located in RAM.
 	 */
@@ -344,7 +348,7 @@ __create_page_tables:
 	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
 #endif
 
-#if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
+#if defined(CONFIG_ARCH_NETWINDER)
 	/*
 	 * If we're using the NetWinder or CATS, we also need to map
 	 * in the 16550-type serial port for the debug messages
@@ -407,7 +411,11 @@ ENTRY(secondary_startup)
 	/*
 	 * Use the page tables supplied from  __cpu_up.
 	 */
+#ifdef CONFIG_XIP_KERNEL
+	ldr	r3, =(secondary_data + PLAT_PHYS_OFFSET - PAGE_OFFSET)
+#else
 	adr_l	r3, secondary_data
+#endif
 	mov_l	r12, __secondary_switched
 	ldrd	r4, r5, [r3, #0]		@ get secondary_data.pgdir
 ARM_BE8(eor	r4, r4, r5)			@ Swap r5 and r4 in BE:
diff --git a/arch/arm/kernel/head.h b/arch/arm/kernel/head.h
new file mode 100644
index 000000000000..0eb5accf7141
--- /dev/null
+++ b/arch/arm/kernel/head.h
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+extern char __data_loc[];
+extern char _edata_loc[];
+extern char _sdata[];
+
+int __init __inflate_kernel_data(void);
diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c
index 2373020af965..38a90a3d12b2 100644
--- a/arch/arm/kernel/hibernate.c
+++ b/arch/arm/kernel/hibernate.c
@@ -19,7 +19,7 @@
 #include <asm/system_misc.h>
 #include <asm/idmap.h>
 #include <asm/suspend.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/sections.h>
 #include "reboot.h"
 
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 054e9199f30d..cd4b34c96e35 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -17,6 +17,7 @@
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
 #include <linux/smp.h>
+#include <linux/cfi.h>
 #include <linux/cpu_pm.h>
 #include <linux/coresight.h>
 
@@ -903,6 +904,37 @@ unlock:
 	watchpoint_single_step_handler(addr);
 }
 
+#ifdef CONFIG_CFI
+static void hw_breakpoint_cfi_handler(struct pt_regs *regs)
+{
+	/*
+	 * TODO: implementing target and type to pass to CFI using the more
+	 * elaborate report_cfi_failure() requires compiler work. To be able
+	 * to properly extract target information the compiler needs to
+	 * emit a stable instructions sequence for the CFI checks so we can
+	 * decode the instructions preceding the trap and figure out which
+	 * registers were used.
+	 */
+
+	switch (report_cfi_failure_noaddr(regs, instruction_pointer(regs))) {
+	case BUG_TRAP_TYPE_BUG:
+		die("Oops - CFI", regs, 0);
+		break;
+	case BUG_TRAP_TYPE_WARN:
+		/* Skip the breaking instruction */
+		instruction_pointer(regs) += 4;
+		break;
+	default:
+		die("Unknown CFI error", regs, 0);
+		break;
+	}
+}
+#else
+static void hw_breakpoint_cfi_handler(struct pt_regs *regs)
+{
+}
+#endif
+
 /*
  * Called from either the Data Abort Handler [watchpoint] or the
  * Prefetch Abort Handler [breakpoint] with interrupts disabled.
@@ -932,6 +964,9 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
 	case ARM_ENTRY_SYNC_WATCHPOINT:
 		watchpoint_handler(addr, fsr, regs);
 		break;
+	case ARM_ENTRY_CFI_BREAKPOINT:
+		hw_breakpoint_cfi_handler(regs);
+		break;
 	default:
 		ret = 1; /* Unhandled fault. */
 	}
diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S
index b699b22a4db1..3a506b9095a5 100644
--- a/arch/arm/kernel/hyp-stub.S
+++ b/arch/arm/kernel/hyp-stub.S
@@ -9,6 +9,8 @@
 #include <asm/assembler.h>
 #include <asm/virt.h>
 
+.arch armv7-a
+
 #ifndef ZIMAGE
 /*
  * For the kernel proper, we need to find out the CPU boot mode long after
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 034cb48c9eeb..e1993e28a9ec 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -32,6 +32,7 @@
 #include <linux/kallsyms.h>
 #include <linux/proc_fs.h>
 #include <linux/export.h>
+#include <linux/vmalloc.h>
 
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/cache-uniphier.h>
@@ -70,7 +71,7 @@ static void __init init_irq_stacks(void)
 	}
 }
 
-#ifndef CONFIG_PREEMPT_RT
+#ifdef CONFIG_SOFTIRQ_ON_OWN_STACK
 static void ____do_softirq(void *arg)
 {
 	__do_softirq();
@@ -110,7 +111,7 @@ void handle_IRQ(unsigned int irq, struct pt_regs *regs)
 	 * Some hardware gives randomly wrong interrupts.  Rather
 	 * than crashing, do something sensible.
 	 */
-	if (unlikely(!irq || irq >= nr_irqs))
+	if (unlikely(!irq || irq >= irq_get_nr_irqs()))
 		desc = NULL;
 	else
 		desc = irq_to_desc(irq);
@@ -150,7 +151,6 @@ void __init init_IRQ(void)
 #ifdef CONFIG_SPARSE_IRQ
 int __init arch_probe_nr_irqs(void)
 {
-	nr_irqs = machine_desc->nr_irqs ? machine_desc->nr_irqs : NR_IRQS;
-	return nr_irqs;
+	return irq_set_nr_irqs(machine_desc->nr_irqs ? : NR_IRQS);
 }
 #endif
diff --git a/arch/arm/kernel/isa.c b/arch/arm/kernel/isa.c
index d8a509c5d5bd..db8be609fab2 100644
--- a/arch/arm/kernel/isa.c
+++ b/arch/arm/kernel/isa.c
@@ -16,7 +16,7 @@
 
 static unsigned int isa_membase, isa_portbase, isa_portshift;
 
-static struct ctl_table ctl_isa_vars[4] = {
+static const struct ctl_table ctl_isa_vars[] = {
 	{
 		.procname	= "membase",
 		.data		= &isa_membase, 
@@ -35,32 +35,16 @@ static struct ctl_table ctl_isa_vars[4] = {
 		.maxlen		= sizeof(isa_portshift),
 		.mode		= 0444,
 		.proc_handler	= proc_dointvec,
-	}, {}
+	},
 };
 
 static struct ctl_table_header *isa_sysctl_header;
 
-static struct ctl_table ctl_isa[2] = {
-	{
-		.procname	= "isa",
-		.mode		= 0555,
-		.child		= ctl_isa_vars,
-	}, {}
-};
-
-static struct ctl_table ctl_bus[2] = {
-	{
-		.procname	= "bus",
-		.mode		= 0555,
-		.child		= ctl_isa,
-	}, {}
-};
-
 void __init
 register_isa_ports(unsigned int membase, unsigned int portbase, unsigned int portshift)
 {
 	isa_membase = membase;
 	isa_portbase = portbase;
 	isa_portshift = portshift;
-	isa_sysctl_header = register_sysctl_table(ctl_bus);
+	isa_sysctl_header = register_sysctl("bus/isa", ctl_isa_vars);
 }
diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S
index d2b4ac06e4ed..4a335d3c5969 100644
--- a/arch/arm/kernel/iwmmxt.S
+++ b/arch/arm/kernel/iwmmxt.S
@@ -18,18 +18,6 @@
 #include <asm/assembler.h>
 #include "iwmmxt.h"
 
-#if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B)
-#define PJ4(code...)		code
-#define XSC(code...)
-#elif defined(CONFIG_CPU_MOHAWK) || \
-	defined(CONFIG_CPU_XSC3) || \
-	defined(CONFIG_CPU_XSCALE)
-#define PJ4(code...)
-#define XSC(code...)		code
-#else
-#error "Unsupported iWMMXt architecture"
-#endif
-
 #define MMX_WR0		 	(0x00)
 #define MMX_WR1		 	(0x08)
 #define MMX_WR2		 	(0x10)
@@ -58,9 +46,19 @@
 	.text
 	.arm
 
+ENTRY(iwmmxt_undef_handler)
+	push		{r9, r10, lr}
+	get_thread_info	r10
+	mov		r9, pc
+	b		iwmmxt_task_enable
+	mov		r0, #0
+	pop		{r9, r10, pc}
+ENDPROC(iwmmxt_undef_handler)
+
 /*
  * Lazy switching of Concan coprocessor context
  *
+ * r0  = struct pt_regs pointer
  * r10 = struct thread_info pointer
  * r9  = ret_from_exception
  * lr  = undefined instr exit
@@ -71,25 +69,21 @@
 ENTRY(iwmmxt_task_enable)
 	inc_preempt_count r10, r3
 
-	XSC(mrc	p15, 0, r2, c15, c1, 0)
-	PJ4(mrc p15, 0, r2, c1, c0, 2)
+	mrc	p15, 0, r2, c15, c1, 0
 	@ CP0 and CP1 accessible?
-	XSC(tst	r2, #0x3)
-	PJ4(tst	r2, #0xf)
+	tst	r2, #0x3
 	bne	4f				@ if so no business here
 	@ enable access to CP0 and CP1
-	XSC(orr	r2, r2, #0x3)
-	XSC(mcr	p15, 0, r2, c15, c1, 0)
-	PJ4(orr	r2, r2, #0xf)
-	PJ4(mcr	p15, 0, r2, c1, c0, 2)
+	orr	r2, r2, #0x3
+	mcr	p15, 0, r2, c15, c1, 0
 
 	ldr	r3, =concan_owner
-	add	r0, r10, #TI_IWMMXT_STATE	@ get task Concan save area
-	ldr	r2, [sp, #60]			@ current task pc value
+	ldr	r2, [r0, #S_PC]			@ current task pc value
 	ldr	r1, [r3]			@ get current Concan owner
-	str	r0, [r3]			@ this task now owns Concan regs
 	sub	r2, r2, #4			@ adjust pc back
-	str	r2, [sp, #60]
+	str	r2, [r0, #S_PC]
+	add	r0, r10, #TI_IWMMXT_STATE	@ get task Concan save area
+	str	r0, [r3]			@ this task now owns Concan regs
 
 	mrc	p15, 0, r2, c2, c0, 0
 	mov	r2, r2				@ cpwait
@@ -208,12 +202,9 @@ ENTRY(iwmmxt_task_disable)
 	bne	1f				@ no: quit
 
 	@ enable access to CP0 and CP1
-	XSC(mrc	p15, 0, r4, c15, c1, 0)
-	XSC(orr	r4, r4, #0x3)
-	XSC(mcr	p15, 0, r4, c15, c1, 0)
-	PJ4(mrc p15, 0, r4, c1, c0, 2)
-	PJ4(orr	r4, r4, #0xf)
-	PJ4(mcr	p15, 0, r4, c1, c0, 2)
+	mrc	p15, 0, r4, c15, c1, 0
+	orr	r4, r4, #0x3
+	mcr	p15, 0, r4, c15, c1, 0
 
 	mov	r0, #0				@ nothing to load
 	str	r0, [r3]			@ no more current owner
@@ -222,10 +213,8 @@ ENTRY(iwmmxt_task_disable)
 	bl	concan_save
 
 	@ disable access to CP0 and CP1
-	XSC(bic	r4, r4, #0x3)
-	XSC(mcr	p15, 0, r4, c15, c1, 0)
-	PJ4(bic	r4, r4, #0xf)
-	PJ4(mcr	p15, 0, r4, c1, c0, 2)
+	bic	r4, r4, #0x3
+	mcr	p15, 0, r4, c15, c1, 0
 
 	mrc	p15, 0, r2, c2, c0, 0
 	mov	r2, r2				@ cpwait
@@ -320,11 +309,9 @@ ENDPROC(iwmmxt_task_restore)
  */
 ENTRY(iwmmxt_task_switch)
 
-	XSC(mrc	p15, 0, r1, c15, c1, 0)
-	PJ4(mrc	p15, 0, r1, c1, c0, 2)
+	mrc	p15, 0, r1, c15, c1, 0
 	@ CP0 and CP1 accessible?
-	XSC(tst	r1, #0x3)
-	PJ4(tst	r1, #0xf)
+	tst	r1, #0x3
 	bne	1f				@ yes: block them for next task
 
 	ldr	r2, =concan_owner
@@ -334,10 +321,8 @@ ENTRY(iwmmxt_task_switch)
 	retne	lr				@ no: leave Concan disabled
 
 1:	@ flip Concan access
-	XSC(eor	r1, r1, #0x3)
-	XSC(mcr	p15, 0, r1, c15, c1, 0)
-	PJ4(eor r1, r1, #0xf)
-	PJ4(mcr	p15, 0, r1, c1, c0, 2)
+	eor	r1, r1, #0x3
+	mcr	p15, 0, r1, c15, c1, 0
 
 	mrc	p15, 0, r1, c2, c0, 0
 	sub	pc, lr, r1, lsr #32		@ cpwait and return
diff --git a/arch/arm/kernel/jump_label.c b/arch/arm/kernel/jump_label.c
index eb9c24b6e8e2..a06a92d0f550 100644
--- a/arch/arm/kernel/jump_label.c
+++ b/arch/arm/kernel/jump_label.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/kernel.h>
 #include <linux/jump_label.h>
-#include <asm/patch.h>
+#include <asm/text-patching.h>
 #include <asm/insn.h>
 
 static void __arch_jump_label_transform(struct jump_entry *entry,
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
index 22f937e6f3ff..ab76c55fd610 100644
--- a/arch/arm/kernel/kgdb.c
+++ b/arch/arm/kernel/kgdb.c
@@ -15,7 +15,7 @@
 #include <linux/kgdb.h>
 #include <linux/uaccess.h>
 
-#include <asm/patch.h>
+#include <asm/text-patching.h>
 #include <asm/traps.h>
 
 struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] =
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index f567032a09c0..dd430477e7c1 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -73,10 +73,12 @@ void machine_kexec_cleanup(struct kimage *image)
 {
 }
 
-void machine_crash_nonpanic_core(void *unused)
+static void machine_crash_nonpanic_core(void *unused)
 {
 	struct pt_regs regs;
 
+	local_fiq_disable();
+
 	crash_setup_regs(&regs, get_irq_regs());
 	printk(KERN_DEBUG "CPU %u will stop doing anything useful since another CPU has crashed\n",
 	       smp_processor_id());
@@ -92,16 +94,28 @@ void machine_crash_nonpanic_core(void *unused)
 	}
 }
 
+static DEFINE_PER_CPU(call_single_data_t, cpu_stop_csd) =
+	CSD_INIT(machine_crash_nonpanic_core, NULL);
+
 void crash_smp_send_stop(void)
 {
 	static int cpus_stopped;
 	unsigned long msecs;
+	call_single_data_t *csd;
+	int cpu, this_cpu = raw_smp_processor_id();
 
 	if (cpus_stopped)
 		return;
 
 	atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
-	smp_call_function(machine_crash_nonpanic_core, NULL, false);
+	for_each_online_cpu(cpu) {
+		if (cpu == this_cpu)
+			continue;
+
+		csd = &per_cpu(cpu_stop_csd, cpu);
+		smp_call_function_single_async(cpu, csd);
+	}
+
 	msecs = 1000; /* Wait at most a second for the other cpus to stop */
 	while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) {
 		mdelay(1);
@@ -113,29 +127,6 @@ void crash_smp_send_stop(void)
 	cpus_stopped = 1;
 }
 
-static void machine_kexec_mask_interrupts(void)
-{
-	unsigned int i;
-	struct irq_desc *desc;
-
-	for_each_irq_desc(i, desc) {
-		struct irq_chip *chip;
-
-		chip = irq_desc_get_chip(desc);
-		if (!chip)
-			continue;
-
-		if (chip->irq_eoi && irqd_irq_inprogress(&desc->irq_data))
-			chip->irq_eoi(&desc->irq_data);
-
-		if (chip->irq_mask)
-			chip->irq_mask(&desc->irq_data);
-
-		if (chip->irq_disable && !irqd_irq_disabled(&desc->irq_data))
-			chip->irq_disable(&desc->irq_data);
-	}
-}
-
 void machine_crash_shutdown(struct pt_regs *regs)
 {
 	local_irq_disable();
@@ -184,10 +175,3 @@ void machine_kexec(struct kimage *image)
 
 	soft_restart(reboot_entry_phys);
 }
-
-void arch_crash_save_vmcoreinfo(void)
-{
-#ifdef CONFIG_ARM_LPAE
-	VMCOREINFO_CONFIG(ARM_LPAE);
-#endif
-}
diff --git a/arch/arm/kernel/module-plts.c b/arch/arm/kernel/module-plts.c
index 1fc309b41f94..354ce16d83cb 100644
--- a/arch/arm/kernel/module-plts.c
+++ b/arch/arm/kernel/module-plts.c
@@ -28,11 +28,6 @@ static const u32 fixed_plts[] = {
 #endif
 };
 
-static bool in_init(const struct module *mod, unsigned long loc)
-{
-	return loc - (u32)mod->init_layout.base < mod->init_layout.size;
-}
-
 static void prealloc_fixed(struct mod_plt_sec *pltsec, struct plt_entries *plt)
 {
 	int i;
@@ -50,8 +45,8 @@ static void prealloc_fixed(struct mod_plt_sec *pltsec, struct plt_entries *plt)
 
 u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)
 {
-	struct mod_plt_sec *pltsec = !in_init(mod, loc) ? &mod->arch.core :
-							  &mod->arch.init;
+	struct mod_plt_sec *pltsec = !within_module_init(loc, mod) ?
+						&mod->arch.core : &mod->arch.init;
 	struct plt_entries *plt;
 	int idx;
 
@@ -256,7 +251,7 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 		/* sort by type and symbol index */
 		sort(rels, numrels, sizeof(Elf32_Rel), cmp_rel, NULL);
 
-		if (strncmp(secstrings + dstsec->sh_name, ".init", 5) != 0)
+		if (!module_init_layout_section(secstrings + dstsec->sh_name))
 			core_plts += count_plts(syms, dstsec->sh_addr, rels,
 						numrels, s->sh_info);
 		else
@@ -284,3 +279,15 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 		 mod->arch.core.plt->sh_size, mod->arch.init.plt->sh_size);
 	return 0;
 }
+
+bool in_module_plt(unsigned long loc)
+{
+	struct module *mod;
+	bool ret;
+
+	guard(rcu)();
+	mod = __module_text_address(loc);
+	ret = mod && (loc - (u32)mod->arch.core.plt_ent < mod->arch.core.plt_count * PLT_ENT_SIZE ||
+		      loc - (u32)mod->arch.init.plt_ent < mod->arch.init.plt_count * PLT_ENT_SIZE);
+	return ret;
+}
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index d59c36dc0494..55ca3fcd37e8 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -12,48 +12,14 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/elf.h>
-#include <linux/vmalloc.h>
 #include <linux/fs.h>
 #include <linux/string.h>
-#include <linux/gfp.h>
 
 #include <asm/sections.h>
 #include <asm/smp_plat.h>
 #include <asm/unwind.h>
 #include <asm/opcodes.h>
 
-#ifdef CONFIG_XIP_KERNEL
-/*
- * The XIP kernel text is mapped in the module area for modules and
- * some other stuff to work without any indirect relocations.
- * MODULES_VADDR is redefined here and not in asm/memory.h to avoid
- * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off.
- */
-#undef MODULES_VADDR
-#define MODULES_VADDR	(((unsigned long)_exiprom + ~PMD_MASK) & PMD_MASK)
-#endif
-
-#ifdef CONFIG_MMU
-void *module_alloc(unsigned long size)
-{
-	gfp_t gfp_mask = GFP_KERNEL;
-	void *p;
-
-	/* Silence the initial allocation */
-	if (IS_ENABLED(CONFIG_ARM_MODULE_PLTS))
-		gfp_mask |= __GFP_NOWARN;
-
-	p = __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END,
-				gfp_mask, PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE,
-				__builtin_return_address(0));
-	if (!IS_ENABLED(CONFIG_ARM_MODULE_PLTS) || p)
-		return p;
-	return __vmalloc_node_range(size, 1,  VMALLOC_START, VMALLOC_END,
-				GFP_KERNEL, PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE,
-				__builtin_return_address(0));
-}
-#endif
-
 bool module_init_section(const char *name)
 {
 	return strstarts(name, ".init") ||
@@ -169,8 +135,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 
 			offset = __mem_to_opcode_arm(*(u32 *)loc);
 			offset = (offset & 0x00ffffff) << 2;
-			if (offset & 0x02000000)
-				offset -= 0x04000000;
+			offset = sign_extend32(offset, 25);
 
 			offset += sym->st_value - loc;
 
@@ -236,7 +201,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		case R_ARM_MOVT_PREL:
 			offset = tmp = __mem_to_opcode_arm(*(u32 *)loc);
 			offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
-			offset = (offset ^ 0x8000) - 0x8000;
+			offset = sign_extend32(offset, 15);
 
 			offset += sym->st_value;
 			if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_PREL ||
@@ -344,8 +309,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 				((~(j2 ^ sign) & 1) << 22) |
 				((upper & 0x03ff) << 12) |
 				((lower & 0x07ff) << 1);
-			if (offset & 0x01000000)
-				offset -= 0x02000000;
+			offset = sign_extend32(offset, 24);
 			offset += sym->st_value - loc;
 
 			/*
@@ -401,7 +365,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			offset = ((upper & 0x000f) << 12) |
 				((upper & 0x0400) << 1) |
 				((lower & 0x7000) >> 4) | (lower & 0x00ff);
-			offset = (offset ^ 0x8000) - 0x8000;
+			offset = sign_extend32(offset, 15);
 			offset += sym->st_value;
 
 			if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_PREL ||
@@ -431,11 +395,6 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 	return 0;
 }
 
-struct mod_unwind_map {
-	const Elf_Shdr *unw_sec;
-	const Elf_Shdr *txt_sec;
-};
-
 static const Elf_Shdr *find_mod_section(const Elf32_Ehdr *hdr,
 	const Elf_Shdr *sechdrs, const char *name)
 {
@@ -525,7 +484,7 @@ module_arch_cleanup(struct module *mod)
 #endif
 }
 
-void __weak module_arch_freeing_init(struct module *mod)
+void module_arch_freeing_init(struct module *mod)
 {
 #ifdef CONFIG_ARM_UNWIND
 	struct unwind_table *init = mod->arch.init_table;
diff --git a/arch/arm/kernel/patch.c b/arch/arm/kernel/patch.c
index e9e828b6bb30..4d45e60cd46d 100644
--- a/arch/arm/kernel/patch.c
+++ b/arch/arm/kernel/patch.c
@@ -9,7 +9,7 @@
 #include <asm/fixmap.h>
 #include <asm/smp_plat.h>
 #include <asm/opcodes.h>
-#include <asm/patch.h>
+#include <asm/text-patching.h>
 
 struct patch {
 	void *addr;
diff --git a/arch/arm/kernel/perf_callchain.c b/arch/arm/kernel/perf_callchain.c
index bc6b246ab55e..a2601b1ef318 100644
--- a/arch/arm/kernel/perf_callchain.c
+++ b/arch/arm/kernel/perf_callchain.c
@@ -81,13 +81,11 @@ perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs
  * whist unwinding the stackframe and is like a subroutine return so we use
  * the PC.
  */
-static int
-callchain_trace(struct stackframe *fr,
-		void *data)
+static bool
+callchain_trace(void *data, unsigned long pc)
 {
 	struct perf_callchain_entry_ctx *entry = data;
-	perf_callchain_store(entry, fr->pc);
-	return 0;
+	return perf_callchain_store(entry, pc) == 0;
 }
 
 void
@@ -98,20 +96,3 @@ perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *re
 	arm_get_current_stackframe(regs, &fr);
 	walk_stackframe(&fr, callchain_trace, entry);
 }
-
-unsigned long perf_instruction_pointer(struct pt_regs *regs)
-{
-	return instruction_pointer(regs);
-}
-
-unsigned long perf_misc_flags(struct pt_regs *regs)
-{
-	int misc = 0;
-
-	if (user_mode(regs))
-		misc |= PERF_RECORD_MISC_USER;
-	else
-		misc |= PERF_RECORD_MISC_KERNEL;
-
-	return misc;
-}
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
deleted file mode 100644
index 1ae99deeec54..000000000000
--- a/arch/arm/kernel/perf_event_v6.c
+++ /dev/null
@@ -1,590 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ARMv6 Performance counter handling code.
- *
- * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
- *
- * ARMv6 has 2 configurable performance counters and a single cycle counter.
- * They all share a single reset bit but can be written to zero so we can use
- * that for a reset.
- *
- * The counters can't be individually enabled or disabled so when we remove
- * one event and replace it with another we could get spurious counts from the
- * wrong event. However, we can take advantage of the fact that the
- * performance counters can export events to the event bus, and the event bus
- * itself can be monitored. This requires that we *don't* export the events to
- * the event bus. The procedure for disabling a configurable counter is:
- *	- change the counter to count the ETMEXTOUT[0] signal (0x20). This
- *	  effectively stops the counter from counting.
- *	- disable the counter's interrupt generation (each counter has it's
- *	  own interrupt enable bit).
- * Once stopped, the counter value can be written as 0 to reset.
- *
- * To enable a counter:
- *	- enable the counter's interrupt generation.
- *	- set the new event type.
- *
- * Note: the dedicated cycle counter only counts cycles and can't be
- * enabled/disabled independently of the others. When we want to disable the
- * cycle counter, we have to just disable the interrupt reporting and start
- * ignoring that counter. When re-enabling, we have to reset the value and
- * enable the interrupt.
- */
-
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
-
-#include <asm/cputype.h>
-#include <asm/irq_regs.h>
-
-#include <linux/of.h>
-#include <linux/perf/arm_pmu.h>
-#include <linux/platform_device.h>
-
-enum armv6_perf_types {
-	ARMV6_PERFCTR_ICACHE_MISS	    = 0x0,
-	ARMV6_PERFCTR_IBUF_STALL	    = 0x1,
-	ARMV6_PERFCTR_DDEP_STALL	    = 0x2,
-	ARMV6_PERFCTR_ITLB_MISS		    = 0x3,
-	ARMV6_PERFCTR_DTLB_MISS		    = 0x4,
-	ARMV6_PERFCTR_BR_EXEC		    = 0x5,
-	ARMV6_PERFCTR_BR_MISPREDICT	    = 0x6,
-	ARMV6_PERFCTR_INSTR_EXEC	    = 0x7,
-	ARMV6_PERFCTR_DCACHE_HIT	    = 0x9,
-	ARMV6_PERFCTR_DCACHE_ACCESS	    = 0xA,
-	ARMV6_PERFCTR_DCACHE_MISS	    = 0xB,
-	ARMV6_PERFCTR_DCACHE_WBACK	    = 0xC,
-	ARMV6_PERFCTR_SW_PC_CHANGE	    = 0xD,
-	ARMV6_PERFCTR_MAIN_TLB_MISS	    = 0xF,
-	ARMV6_PERFCTR_EXPL_D_ACCESS	    = 0x10,
-	ARMV6_PERFCTR_LSU_FULL_STALL	    = 0x11,
-	ARMV6_PERFCTR_WBUF_DRAINED	    = 0x12,
-	ARMV6_PERFCTR_CPU_CYCLES	    = 0xFF,
-	ARMV6_PERFCTR_NOP		    = 0x20,
-};
-
-enum armv6_counters {
-	ARMV6_CYCLE_COUNTER = 0,
-	ARMV6_COUNTER0,
-	ARMV6_COUNTER1,
-};
-
-/*
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
-	PERF_MAP_ALL_UNSUPPORTED,
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV6_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV6_PERFCTR_INSTR_EXEC,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV6_PERFCTR_BR_EXEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV6_PERFCTR_BR_MISPREDICT,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= ARMV6_PERFCTR_IBUF_STALL,
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= ARMV6_PERFCTR_LSU_FULL_STALL,
-};
-
-static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					  [PERF_COUNT_HW_CACHE_OP_MAX]
-					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-
-	/*
-	 * The performance counters don't differentiate between read and write
-	 * accesses/misses so this isn't strictly correct, but it's the best we
-	 * can do. Writes and reads get combined.
-	 */
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV6_PERFCTR_DCACHE_ACCESS,
-	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= ARMV6_PERFCTR_DCACHE_MISS,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV6_PERFCTR_DCACHE_ACCESS,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV6_PERFCTR_DCACHE_MISS,
-
-	[C(L1I)][C(OP_READ)][C(RESULT_MISS)]	= ARMV6_PERFCTR_ICACHE_MISS,
-
-	/*
-	 * The ARM performance counters can count micro DTLB misses, micro ITLB
-	 * misses and main TLB misses. There isn't an event for TLB misses, so
-	 * use the micro misses here and if users want the main TLB misses they
-	 * can use a raw counter.
-	 */
-	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV6_PERFCTR_DTLB_MISS,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV6_PERFCTR_DTLB_MISS,
-
-	[C(ITLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV6_PERFCTR_ITLB_MISS,
-	[C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV6_PERFCTR_ITLB_MISS,
-};
-
-enum armv6mpcore_perf_types {
-	ARMV6MPCORE_PERFCTR_ICACHE_MISS	    = 0x0,
-	ARMV6MPCORE_PERFCTR_IBUF_STALL	    = 0x1,
-	ARMV6MPCORE_PERFCTR_DDEP_STALL	    = 0x2,
-	ARMV6MPCORE_PERFCTR_ITLB_MISS	    = 0x3,
-	ARMV6MPCORE_PERFCTR_DTLB_MISS	    = 0x4,
-	ARMV6MPCORE_PERFCTR_BR_EXEC	    = 0x5,
-	ARMV6MPCORE_PERFCTR_BR_NOTPREDICT   = 0x6,
-	ARMV6MPCORE_PERFCTR_BR_MISPREDICT   = 0x7,
-	ARMV6MPCORE_PERFCTR_INSTR_EXEC	    = 0x8,
-	ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
-	ARMV6MPCORE_PERFCTR_DCACHE_RDMISS   = 0xB,
-	ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
-	ARMV6MPCORE_PERFCTR_DCACHE_WRMISS   = 0xD,
-	ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
-	ARMV6MPCORE_PERFCTR_SW_PC_CHANGE    = 0xF,
-	ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS   = 0x10,
-	ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
-	ARMV6MPCORE_PERFCTR_LSU_FULL_STALL  = 0x12,
-	ARMV6MPCORE_PERFCTR_WBUF_DRAINED    = 0x13,
-	ARMV6MPCORE_PERFCTR_CPU_CYCLES	    = 0xFF,
-};
-
-/*
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
-	PERF_MAP_ALL_UNSUPPORTED,
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV6MPCORE_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV6MPCORE_PERFCTR_INSTR_EXEC,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV6MPCORE_PERFCTR_BR_EXEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= ARMV6MPCORE_PERFCTR_IBUF_STALL,
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= ARMV6MPCORE_PERFCTR_LSU_FULL_STALL,
-};
-
-static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					[PERF_COUNT_HW_CACHE_OP_MAX]
-					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
-	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
-
-	[C(L1I)][C(OP_READ)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_ICACHE_MISS,
-
-	/*
-	 * The ARM performance counters can count micro DTLB misses, micro ITLB
-	 * misses and main TLB misses. There isn't an event for TLB misses, so
-	 * use the micro misses here and if users want the main TLB misses they
-	 * can use a raw counter.
-	 */
-	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_DTLB_MISS,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_DTLB_MISS,
-
-	[C(ITLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_ITLB_MISS,
-	[C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV6MPCORE_PERFCTR_ITLB_MISS,
-};
-
-static inline unsigned long
-armv6_pmcr_read(void)
-{
-	u32 val;
-	asm volatile("mrc   p15, 0, %0, c15, c12, 0" : "=r"(val));
-	return val;
-}
-
-static inline void
-armv6_pmcr_write(unsigned long val)
-{
-	asm volatile("mcr   p15, 0, %0, c15, c12, 0" : : "r"(val));
-}
-
-#define ARMV6_PMCR_ENABLE		(1 << 0)
-#define ARMV6_PMCR_CTR01_RESET		(1 << 1)
-#define ARMV6_PMCR_CCOUNT_RESET		(1 << 2)
-#define ARMV6_PMCR_CCOUNT_DIV		(1 << 3)
-#define ARMV6_PMCR_COUNT0_IEN		(1 << 4)
-#define ARMV6_PMCR_COUNT1_IEN		(1 << 5)
-#define ARMV6_PMCR_CCOUNT_IEN		(1 << 6)
-#define ARMV6_PMCR_COUNT0_OVERFLOW	(1 << 8)
-#define ARMV6_PMCR_COUNT1_OVERFLOW	(1 << 9)
-#define ARMV6_PMCR_CCOUNT_OVERFLOW	(1 << 10)
-#define ARMV6_PMCR_EVT_COUNT0_SHIFT	20
-#define ARMV6_PMCR_EVT_COUNT0_MASK	(0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
-#define ARMV6_PMCR_EVT_COUNT1_SHIFT	12
-#define ARMV6_PMCR_EVT_COUNT1_MASK	(0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
-
-#define ARMV6_PMCR_OVERFLOWED_MASK \
-	(ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
-	 ARMV6_PMCR_CCOUNT_OVERFLOW)
-
-static inline int
-armv6_pmcr_has_overflowed(unsigned long pmcr)
-{
-	return pmcr & ARMV6_PMCR_OVERFLOWED_MASK;
-}
-
-static inline int
-armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
-				  enum armv6_counters counter)
-{
-	int ret = 0;
-
-	if (ARMV6_CYCLE_COUNTER == counter)
-		ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
-	else if (ARMV6_COUNTER0 == counter)
-		ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
-	else if (ARMV6_COUNTER1 == counter)
-		ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
-	else
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-
-	return ret;
-}
-
-static inline u64 armv6pmu_read_counter(struct perf_event *event)
-{
-	struct hw_perf_event *hwc = &event->hw;
-	int counter = hwc->idx;
-	unsigned long value = 0;
-
-	if (ARMV6_CYCLE_COUNTER == counter)
-		asm volatile("mrc   p15, 0, %0, c15, c12, 1" : "=r"(value));
-	else if (ARMV6_COUNTER0 == counter)
-		asm volatile("mrc   p15, 0, %0, c15, c12, 2" : "=r"(value));
-	else if (ARMV6_COUNTER1 == counter)
-		asm volatile("mrc   p15, 0, %0, c15, c12, 3" : "=r"(value));
-	else
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-
-	return value;
-}
-
-static inline void armv6pmu_write_counter(struct perf_event *event, u64 value)
-{
-	struct hw_perf_event *hwc = &event->hw;
-	int counter = hwc->idx;
-
-	if (ARMV6_CYCLE_COUNTER == counter)
-		asm volatile("mcr   p15, 0, %0, c15, c12, 1" : : "r"(value));
-	else if (ARMV6_COUNTER0 == counter)
-		asm volatile("mcr   p15, 0, %0, c15, c12, 2" : : "r"(value));
-	else if (ARMV6_COUNTER1 == counter)
-		asm volatile("mcr   p15, 0, %0, c15, c12, 3" : : "r"(value));
-	else
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-}
-
-static void armv6pmu_enable_event(struct perf_event *event)
-{
-	unsigned long val, mask, evt, flags;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-	int idx = hwc->idx;
-
-	if (ARMV6_CYCLE_COUNTER == idx) {
-		mask	= 0;
-		evt	= ARMV6_PMCR_CCOUNT_IEN;
-	} else if (ARMV6_COUNTER0 == idx) {
-		mask	= ARMV6_PMCR_EVT_COUNT0_MASK;
-		evt	= (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
-			  ARMV6_PMCR_COUNT0_IEN;
-	} else if (ARMV6_COUNTER1 == idx) {
-		mask	= ARMV6_PMCR_EVT_COUNT1_MASK;
-		evt	= (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
-			  ARMV6_PMCR_COUNT1_IEN;
-	} else {
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	/*
-	 * Mask out the current event and set the counter to count the event
-	 * that we're interested in.
-	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~mask;
-	val |= evt;
-	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static irqreturn_t
-armv6pmu_handle_irq(struct arm_pmu *cpu_pmu)
-{
-	unsigned long pmcr = armv6_pmcr_read();
-	struct perf_sample_data data;
-	struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events);
-	struct pt_regs *regs;
-	int idx;
-
-	if (!armv6_pmcr_has_overflowed(pmcr))
-		return IRQ_NONE;
-
-	regs = get_irq_regs();
-
-	/*
-	 * The interrupts are cleared by writing the overflow flags back to
-	 * the control register. All of the other bits don't have any effect
-	 * if they are rewritten, so write the whole value back.
-	 */
-	armv6_pmcr_write(pmcr);
-
-	for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		/* Ignore if we don't have an event. */
-		if (!event)
-			continue;
-
-		/*
-		 * We have a single interrupt for all counters. Check that
-		 * each counter has overflowed before we process it.
-		 */
-		if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event);
-		perf_sample_data_init(&data, 0, hwc->last_period);
-		if (!armpmu_event_set_period(event))
-			continue;
-
-		if (perf_event_overflow(event, &data, regs))
-			cpu_pmu->disable(event);
-	}
-
-	/*
-	 * Handle the pending perf events.
-	 *
-	 * Note: this call *must* be run with interrupts disabled. For
-	 * platforms that can have the PMU interrupts raised as an NMI, this
-	 * will not work.
-	 */
-	irq_work_run();
-
-	return IRQ_HANDLED;
-}
-
-static void armv6pmu_start(struct arm_pmu *cpu_pmu)
-{
-	unsigned long flags, val;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val |= ARMV6_PMCR_ENABLE;
-	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void armv6pmu_stop(struct arm_pmu *cpu_pmu)
-{
-	unsigned long flags, val;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~ARMV6_PMCR_ENABLE;
-	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static int
-armv6pmu_get_event_idx(struct pmu_hw_events *cpuc,
-				struct perf_event *event)
-{
-	struct hw_perf_event *hwc = &event->hw;
-	/* Always place a cycle counter into the cycle counter. */
-	if (ARMV6_PERFCTR_CPU_CYCLES == hwc->config_base) {
-		if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
-			return -EAGAIN;
-
-		return ARMV6_CYCLE_COUNTER;
-	} else {
-		/*
-		 * For anything other than a cycle counter, try and use
-		 * counter0 and counter1.
-		 */
-		if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask))
-			return ARMV6_COUNTER1;
-
-		if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask))
-			return ARMV6_COUNTER0;
-
-		/* The counters are all in use. */
-		return -EAGAIN;
-	}
-}
-
-static void armv6pmu_clear_event_idx(struct pmu_hw_events *cpuc,
-				     struct perf_event *event)
-{
-	clear_bit(event->hw.idx, cpuc->used_mask);
-}
-
-static void armv6pmu_disable_event(struct perf_event *event)
-{
-	unsigned long val, mask, evt, flags;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-	int idx = hwc->idx;
-
-	if (ARMV6_CYCLE_COUNTER == idx) {
-		mask	= ARMV6_PMCR_CCOUNT_IEN;
-		evt	= 0;
-	} else if (ARMV6_COUNTER0 == idx) {
-		mask	= ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
-		evt	= ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
-	} else if (ARMV6_COUNTER1 == idx) {
-		mask	= ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
-		evt	= ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
-	} else {
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	/*
-	 * Mask out the current event and set the counter to count the number
-	 * of ETM bus signal assertion cycles. The external reporting should
-	 * be disabled and so this should never increment.
-	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~mask;
-	val |= evt;
-	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void armv6mpcore_pmu_disable_event(struct perf_event *event)
-{
-	unsigned long val, mask, flags, evt = 0;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-	int idx = hwc->idx;
-
-	if (ARMV6_CYCLE_COUNTER == idx) {
-		mask	= ARMV6_PMCR_CCOUNT_IEN;
-	} else if (ARMV6_COUNTER0 == idx) {
-		mask	= ARMV6_PMCR_COUNT0_IEN;
-	} else if (ARMV6_COUNTER1 == idx) {
-		mask	= ARMV6_PMCR_COUNT1_IEN;
-	} else {
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	/*
-	 * Unlike UP ARMv6, we don't have a way of stopping the counters. We
-	 * simply disable the interrupt reporting.
-	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~mask;
-	val |= evt;
-	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static int armv6_map_event(struct perf_event *event)
-{
-	return armpmu_map_event(event, &armv6_perf_map,
-				&armv6_perf_cache_map, 0xFF);
-}
-
-static void armv6pmu_init(struct arm_pmu *cpu_pmu)
-{
-	cpu_pmu->handle_irq	= armv6pmu_handle_irq;
-	cpu_pmu->enable		= armv6pmu_enable_event;
-	cpu_pmu->disable	= armv6pmu_disable_event;
-	cpu_pmu->read_counter	= armv6pmu_read_counter;
-	cpu_pmu->write_counter	= armv6pmu_write_counter;
-	cpu_pmu->get_event_idx	= armv6pmu_get_event_idx;
-	cpu_pmu->clear_event_idx = armv6pmu_clear_event_idx;
-	cpu_pmu->start		= armv6pmu_start;
-	cpu_pmu->stop		= armv6pmu_stop;
-	cpu_pmu->map_event	= armv6_map_event;
-	cpu_pmu->num_events	= 3;
-}
-
-static int armv6_1136_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	armv6pmu_init(cpu_pmu);
-	cpu_pmu->name		= "armv6_1136";
-	return 0;
-}
-
-static int armv6_1156_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	armv6pmu_init(cpu_pmu);
-	cpu_pmu->name		= "armv6_1156";
-	return 0;
-}
-
-static int armv6_1176_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	armv6pmu_init(cpu_pmu);
-	cpu_pmu->name		= "armv6_1176";
-	return 0;
-}
-
-/*
- * ARMv6mpcore is almost identical to single core ARMv6 with the exception
- * that some of the events have different enumerations and that there is no
- * *hack* to stop the programmable counters. To stop the counters we simply
- * disable the interrupt reporting and update the event. When unthrottling we
- * reset the period and enable the interrupt reporting.
- */
-
-static int armv6mpcore_map_event(struct perf_event *event)
-{
-	return armpmu_map_event(event, &armv6mpcore_perf_map,
-				&armv6mpcore_perf_cache_map, 0xFF);
-}
-
-static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	cpu_pmu->name		= "armv6_11mpcore";
-	cpu_pmu->handle_irq	= armv6pmu_handle_irq;
-	cpu_pmu->enable		= armv6pmu_enable_event;
-	cpu_pmu->disable	= armv6mpcore_pmu_disable_event;
-	cpu_pmu->read_counter	= armv6pmu_read_counter;
-	cpu_pmu->write_counter	= armv6pmu_write_counter;
-	cpu_pmu->get_event_idx	= armv6pmu_get_event_idx;
-	cpu_pmu->clear_event_idx = armv6pmu_clear_event_idx;
-	cpu_pmu->start		= armv6pmu_start;
-	cpu_pmu->stop		= armv6pmu_stop;
-	cpu_pmu->map_event	= armv6mpcore_map_event;
-	cpu_pmu->num_events	= 3;
-
-	return 0;
-}
-
-static const struct of_device_id armv6_pmu_of_device_ids[] = {
-	{.compatible = "arm,arm11mpcore-pmu",	.data = armv6mpcore_pmu_init},
-	{.compatible = "arm,arm1176-pmu",	.data = armv6_1176_pmu_init},
-	{.compatible = "arm,arm1136-pmu",	.data = armv6_1136_pmu_init},
-	{ /* sentinel value */ }
-};
-
-static const struct pmu_probe_info armv6_pmu_probe_table[] = {
-	ARM_PMU_PROBE(ARM_CPU_PART_ARM1136, armv6_1136_pmu_init),
-	ARM_PMU_PROBE(ARM_CPU_PART_ARM1156, armv6_1156_pmu_init),
-	ARM_PMU_PROBE(ARM_CPU_PART_ARM1176, armv6_1176_pmu_init),
-	ARM_PMU_PROBE(ARM_CPU_PART_ARM11MPCORE, armv6mpcore_pmu_init),
-	{ /* sentinel value */ }
-};
-
-static int armv6_pmu_device_probe(struct platform_device *pdev)
-{
-	return arm_pmu_device_probe(pdev, armv6_pmu_of_device_ids,
-				    armv6_pmu_probe_table);
-}
-
-static struct platform_driver armv6_pmu_driver = {
-	.driver		= {
-		.name	= "armv6-pmu",
-		.of_match_table = armv6_pmu_of_device_ids,
-	},
-	.probe		= armv6_pmu_device_probe,
-};
-
-builtin_platform_driver(armv6_pmu_driver);
-#endif	/* CONFIG_CPU_V6 || CONFIG_CPU_V6K */
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
deleted file mode 100644
index eb2190477da1..000000000000
--- a/arch/arm/kernel/perf_event_v7.c
+++ /dev/null
@@ -1,2047 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code.
- *
- * ARMv7 support: Jean Pihet <jpihet@mvista.com>
- * 2010 (c) MontaVista Software, LLC.
- *
- * Copied from ARMv6 code, with the low level code inspired
- *  by the ARMv7 Oprofile code.
- *
- * Cortex-A8 has up to 4 configurable performance counters and
- *  a single cycle counter.
- * Cortex-A9 has up to 31 configurable performance counters and
- *  a single cycle counter.
- *
- * All counters can be enabled/disabled and IRQ masked separately. The cycle
- *  counter and all 4 performance counters together can be reset separately.
- */
-
-#ifdef CONFIG_CPU_V7
-
-#include <asm/cp15.h>
-#include <asm/cputype.h>
-#include <asm/irq_regs.h>
-#include <asm/vfp.h>
-#include "../vfp/vfpinstr.h"
-
-#include <linux/of.h>
-#include <linux/perf/arm_pmu.h>
-#include <linux/platform_device.h>
-
-/*
- * Common ARMv7 event types
- *
- * Note: An implementation may not be able to count all of these events
- * but the encodings are considered to be `reserved' in the case that
- * they are not available.
- */
-#define ARMV7_PERFCTR_PMNC_SW_INCR			0x00
-#define ARMV7_PERFCTR_L1_ICACHE_REFILL			0x01
-#define ARMV7_PERFCTR_ITLB_REFILL			0x02
-#define ARMV7_PERFCTR_L1_DCACHE_REFILL			0x03
-#define ARMV7_PERFCTR_L1_DCACHE_ACCESS			0x04
-#define ARMV7_PERFCTR_DTLB_REFILL			0x05
-#define ARMV7_PERFCTR_MEM_READ				0x06
-#define ARMV7_PERFCTR_MEM_WRITE				0x07
-#define ARMV7_PERFCTR_INSTR_EXECUTED			0x08
-#define ARMV7_PERFCTR_EXC_TAKEN				0x09
-#define ARMV7_PERFCTR_EXC_EXECUTED			0x0A
-#define ARMV7_PERFCTR_CID_WRITE				0x0B
-
-/*
- * ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
- * It counts:
- *  - all (taken) branch instructions,
- *  - instructions that explicitly write the PC,
- *  - exception generating instructions.
- */
-#define ARMV7_PERFCTR_PC_WRITE				0x0C
-#define ARMV7_PERFCTR_PC_IMM_BRANCH			0x0D
-#define ARMV7_PERFCTR_PC_PROC_RETURN			0x0E
-#define ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS		0x0F
-#define ARMV7_PERFCTR_PC_BRANCH_MIS_PRED		0x10
-#define ARMV7_PERFCTR_CLOCK_CYCLES			0x11
-#define ARMV7_PERFCTR_PC_BRANCH_PRED			0x12
-
-/* These events are defined by the PMUv2 supplement (ARM DDI 0457A). */
-#define ARMV7_PERFCTR_MEM_ACCESS			0x13
-#define ARMV7_PERFCTR_L1_ICACHE_ACCESS			0x14
-#define ARMV7_PERFCTR_L1_DCACHE_WB			0x15
-#define ARMV7_PERFCTR_L2_CACHE_ACCESS			0x16
-#define ARMV7_PERFCTR_L2_CACHE_REFILL			0x17
-#define ARMV7_PERFCTR_L2_CACHE_WB			0x18
-#define ARMV7_PERFCTR_BUS_ACCESS			0x19
-#define ARMV7_PERFCTR_MEM_ERROR				0x1A
-#define ARMV7_PERFCTR_INSTR_SPEC			0x1B
-#define ARMV7_PERFCTR_TTBR_WRITE			0x1C
-#define ARMV7_PERFCTR_BUS_CYCLES			0x1D
-
-#define ARMV7_PERFCTR_CPU_CYCLES			0xFF
-
-/* ARMv7 Cortex-A8 specific event types */
-#define ARMV7_A8_PERFCTR_L2_CACHE_ACCESS		0x43
-#define ARMV7_A8_PERFCTR_L2_CACHE_REFILL		0x44
-#define ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS		0x50
-#define ARMV7_A8_PERFCTR_STALL_ISIDE			0x56
-
-/* ARMv7 Cortex-A9 specific event types */
-#define ARMV7_A9_PERFCTR_INSTR_CORE_RENAME		0x68
-#define ARMV7_A9_PERFCTR_STALL_ICACHE			0x60
-#define ARMV7_A9_PERFCTR_STALL_DISPATCH			0x66
-
-/* ARMv7 Cortex-A5 specific event types */
-#define ARMV7_A5_PERFCTR_PREFETCH_LINEFILL		0xc2
-#define ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP		0xc3
-
-/* ARMv7 Cortex-A15 specific event types */
-#define ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ		0x40
-#define ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE	0x41
-#define ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ		0x42
-#define ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE	0x43
-
-#define ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ		0x4C
-#define ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE		0x4D
-
-#define ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ		0x50
-#define ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE		0x51
-#define ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ		0x52
-#define ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE		0x53
-
-#define ARMV7_A15_PERFCTR_PC_WRITE_SPEC			0x76
-
-/* ARMv7 Cortex-A12 specific event types */
-#define ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_READ		0x40
-#define ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_WRITE	0x41
-
-#define ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_READ		0x50
-#define ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_WRITE		0x51
-
-#define ARMV7_A12_PERFCTR_PC_WRITE_SPEC			0x76
-
-#define ARMV7_A12_PERFCTR_PF_TLB_REFILL			0xe7
-
-/* ARMv7 Krait specific event types */
-#define KRAIT_PMRESR0_GROUP0				0xcc
-#define KRAIT_PMRESR1_GROUP0				0xd0
-#define KRAIT_PMRESR2_GROUP0				0xd4
-#define KRAIT_VPMRESR0_GROUP0				0xd8
-
-#define KRAIT_PERFCTR_L1_ICACHE_ACCESS			0x10011
-#define KRAIT_PERFCTR_L1_ICACHE_MISS			0x10010
-
-#define KRAIT_PERFCTR_L1_ITLB_ACCESS			0x12222
-#define KRAIT_PERFCTR_L1_DTLB_ACCESS			0x12210
-
-/* ARMv7 Scorpion specific event types */
-#define SCORPION_LPM0_GROUP0				0x4c
-#define SCORPION_LPM1_GROUP0				0x50
-#define SCORPION_LPM2_GROUP0				0x54
-#define SCORPION_L2LPM_GROUP0				0x58
-#define SCORPION_VLPM_GROUP0				0x5c
-
-#define SCORPION_ICACHE_ACCESS				0x10053
-#define SCORPION_ICACHE_MISS				0x10052
-
-#define SCORPION_DTLB_ACCESS				0x12013
-#define SCORPION_DTLB_MISS				0x12012
-
-#define SCORPION_ITLB_MISS				0x12021
-
-/*
- * Cortex-A8 HW events mapping
- *
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
-	PERF_MAP_ALL_UNSUPPORTED,
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV7_PERFCTR_INSTR_EXECUTED,
-	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= ARMV7_A8_PERFCTR_STALL_ISIDE,
-};
-
-static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					  [PERF_COUNT_HW_CACHE_OP_MAX]
-					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-
-	/*
-	 * The performance counters don't differentiate between read and write
-	 * accesses/misses so this isn't strictly correct, but it's the best we
-	 * can do. Writes and reads get combined.
-	 */
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-
-	[C(L1I)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS,
-	[C(L1I)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
-
-	[C(LL)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_A8_PERFCTR_L2_CACHE_ACCESS,
-	[C(LL)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_A8_PERFCTR_L2_CACHE_REFILL,
-	[C(LL)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV7_A8_PERFCTR_L2_CACHE_ACCESS,
-	[C(LL)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_A8_PERFCTR_L2_CACHE_REFILL,
-
-	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-
-	[C(ITLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-	[C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-
-	[C(BPU)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-	[C(BPU)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-	[C(BPU)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-};
-
-/*
- * Cortex-A9 HW events mapping
- */
-static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
-	PERF_MAP_ALL_UNSUPPORTED,
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV7_A9_PERFCTR_INSTR_CORE_RENAME,
-	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= ARMV7_A9_PERFCTR_STALL_ICACHE,
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= ARMV7_A9_PERFCTR_STALL_DISPATCH,
-};
-
-static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					  [PERF_COUNT_HW_CACHE_OP_MAX]
-					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-
-	/*
-	 * The performance counters don't differentiate between read and write
-	 * accesses/misses so this isn't strictly correct, but it's the best we
-	 * can do. Writes and reads get combined.
-	 */
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-
-	[C(L1I)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
-
-	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-
-	[C(ITLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-	[C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-
-	[C(BPU)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-	[C(BPU)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-	[C(BPU)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-};
-
-/*
- * Cortex-A5 HW events mapping
- */
-static const unsigned armv7_a5_perf_map[PERF_COUNT_HW_MAX] = {
-	PERF_MAP_ALL_UNSUPPORTED,
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV7_PERFCTR_INSTR_EXECUTED,
-	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-};
-
-static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					[PERF_COUNT_HW_CACHE_OP_MAX]
-					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[C(L1D)][C(OP_PREFETCH)][C(RESULT_ACCESS)]	= ARMV7_A5_PERFCTR_PREFETCH_LINEFILL,
-	[C(L1D)][C(OP_PREFETCH)][C(RESULT_MISS)]	= ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP,
-
-	[C(L1I)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_ICACHE_ACCESS,
-	[C(L1I)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
-	/*
-	 * The prefetch counters don't differentiate between the I side and the
-	 * D side.
-	 */
-	[C(L1I)][C(OP_PREFETCH)][C(RESULT_ACCESS)]	= ARMV7_A5_PERFCTR_PREFETCH_LINEFILL,
-	[C(L1I)][C(OP_PREFETCH)][C(RESULT_MISS)]	= ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP,
-
-	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-
-	[C(ITLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-	[C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-
-	[C(BPU)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-	[C(BPU)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-	[C(BPU)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-};
-
-/*
- * Cortex-A15 HW events mapping
- */
-static const unsigned armv7_a15_perf_map[PERF_COUNT_HW_MAX] = {
-	PERF_MAP_ALL_UNSUPPORTED,
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV7_PERFCTR_INSTR_EXECUTED,
-	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV7_A15_PERFCTR_PC_WRITE_SPEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]		= ARMV7_PERFCTR_BUS_CYCLES,
-};
-
-static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					[PERF_COUNT_HW_CACHE_OP_MAX]
-					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ,
-	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE,
-
-	/*
-	 * Not all performance counters differentiate between read and write
-	 * accesses/misses so we're not always strictly correct, but it's the
-	 * best we can do. Writes and reads get combined in these cases.
-	 */
-	[C(L1I)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_ICACHE_ACCESS,
-	[C(L1I)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
-
-	[C(LL)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ,
-	[C(LL)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ,
-	[C(LL)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE,
-	[C(LL)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE,
-
-	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE,
-
-	[C(ITLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-	[C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-
-	[C(BPU)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-	[C(BPU)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-	[C(BPU)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-};
-
-/*
- * Cortex-A7 HW events mapping
- */
-static const unsigned armv7_a7_perf_map[PERF_COUNT_HW_MAX] = {
-	PERF_MAP_ALL_UNSUPPORTED,
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV7_PERFCTR_INSTR_EXECUTED,
-	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]		= ARMV7_PERFCTR_BUS_CYCLES,
-};
-
-static const unsigned armv7_a7_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					[PERF_COUNT_HW_CACHE_OP_MAX]
-					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-
-	/*
-	 * The performance counters don't differentiate between read and write
-	 * accesses/misses so this isn't strictly correct, but it's the best we
-	 * can do. Writes and reads get combined.
-	 */
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-
-	[C(L1I)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_ICACHE_ACCESS,
-	[C(L1I)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
-
-	[C(LL)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_CACHE_ACCESS,
-	[C(LL)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACHE_REFILL,
-	[C(LL)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_CACHE_ACCESS,
-	[C(LL)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACHE_REFILL,
-
-	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-
-	[C(ITLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-	[C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-
-	[C(BPU)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-	[C(BPU)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-	[C(BPU)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-};
-
-/*
- * Cortex-A12 HW events mapping
- */
-static const unsigned armv7_a12_perf_map[PERF_COUNT_HW_MAX] = {
-	PERF_MAP_ALL_UNSUPPORTED,
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV7_PERFCTR_INSTR_EXECUTED,
-	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV7_A12_PERFCTR_PC_WRITE_SPEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]		= ARMV7_PERFCTR_BUS_CYCLES,
-};
-
-static const unsigned armv7_a12_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					[PERF_COUNT_HW_CACHE_OP_MAX]
-					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_READ,
-	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_WRITE,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-
-	/*
-	 * Not all performance counters differentiate between read and write
-	 * accesses/misses so we're not always strictly correct, but it's the
-	 * best we can do. Writes and reads get combined in these cases.
-	 */
-	[C(L1I)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_ICACHE_ACCESS,
-	[C(L1I)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
-
-	[C(LL)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_READ,
-	[C(LL)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACHE_REFILL,
-	[C(LL)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_WRITE,
-	[C(LL)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACHE_REFILL,
-
-	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-	[C(DTLB)][C(OP_PREFETCH)][C(RESULT_MISS)]	= ARMV7_A12_PERFCTR_PF_TLB_REFILL,
-
-	[C(ITLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-	[C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-
-	[C(BPU)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-	[C(BPU)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-	[C(BPU)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-};
-
-/*
- * Krait HW events mapping
- */
-static const unsigned krait_perf_map[PERF_COUNT_HW_MAX] = {
-	PERF_MAP_ALL_UNSUPPORTED,
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV7_PERFCTR_INSTR_EXECUTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
-};
-
-static const unsigned krait_perf_map_no_branch[PERF_COUNT_HW_MAX] = {
-	PERF_MAP_ALL_UNSUPPORTED,
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV7_PERFCTR_INSTR_EXECUTED,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
-};
-
-static const unsigned krait_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					  [PERF_COUNT_HW_CACHE_OP_MAX]
-					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-
-	/*
-	 * The performance counters don't differentiate between read and write
-	 * accesses/misses so this isn't strictly correct, but it's the best we
-	 * can do. Writes and reads get combined.
-	 */
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-
-	[C(L1I)][C(OP_READ)][C(RESULT_ACCESS)]	= KRAIT_PERFCTR_L1_ICACHE_ACCESS,
-	[C(L1I)][C(OP_READ)][C(RESULT_MISS)]	= KRAIT_PERFCTR_L1_ICACHE_MISS,
-
-	[C(DTLB)][C(OP_READ)][C(RESULT_ACCESS)]	= KRAIT_PERFCTR_L1_DTLB_ACCESS,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_ACCESS)]	= KRAIT_PERFCTR_L1_DTLB_ACCESS,
-
-	[C(ITLB)][C(OP_READ)][C(RESULT_ACCESS)]	= KRAIT_PERFCTR_L1_ITLB_ACCESS,
-	[C(ITLB)][C(OP_WRITE)][C(RESULT_ACCESS)]	= KRAIT_PERFCTR_L1_ITLB_ACCESS,
-
-	[C(BPU)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-	[C(BPU)][C(OP_READ)][C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-	[C(BPU)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-};
-
-/*
- * Scorpion HW events mapping
- */
-static const unsigned scorpion_perf_map[PERF_COUNT_HW_MAX] = {
-	PERF_MAP_ALL_UNSUPPORTED,
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV7_PERFCTR_INSTR_EXECUTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
-};
-
-static const unsigned scorpion_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					    [PERF_COUNT_HW_CACHE_OP_MAX]
-					    [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-	/*
-	 * The performance counters don't differentiate between read and write
-	 * accesses/misses so this isn't strictly correct, but it's the best we
-	 * can do. Writes and reads get combined.
-	 */
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = SCORPION_ICACHE_ACCESS,
-	[C(L1I)][C(OP_READ)][C(RESULT_MISS)] = SCORPION_ICACHE_MISS,
-	/*
-	 * Only ITLB misses and DTLB refills are supported.  If users want the
-	 * DTLB refills misses a raw counter must be used.
-	 */
-	[C(DTLB)][C(OP_READ)][C(RESULT_ACCESS)] = SCORPION_DTLB_ACCESS,
-	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = SCORPION_DTLB_MISS,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_ACCESS)] = SCORPION_DTLB_ACCESS,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = SCORPION_DTLB_MISS,
-	[C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = SCORPION_ITLB_MISS,
-	[C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = SCORPION_ITLB_MISS,
-	[C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
-	[C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
-	[C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-};
-
-PMU_FORMAT_ATTR(event, "config:0-7");
-
-static struct attribute *armv7_pmu_format_attrs[] = {
-	&format_attr_event.attr,
-	NULL,
-};
-
-static struct attribute_group armv7_pmu_format_attr_group = {
-	.name = "format",
-	.attrs = armv7_pmu_format_attrs,
-};
-
-#define ARMV7_EVENT_ATTR_RESOLVE(m) #m
-#define ARMV7_EVENT_ATTR(name, config) \
-	PMU_EVENT_ATTR_STRING(name, armv7_event_attr_##name, \
-			      "event=" ARMV7_EVENT_ATTR_RESOLVE(config))
-
-ARMV7_EVENT_ATTR(sw_incr, ARMV7_PERFCTR_PMNC_SW_INCR);
-ARMV7_EVENT_ATTR(l1i_cache_refill, ARMV7_PERFCTR_L1_ICACHE_REFILL);
-ARMV7_EVENT_ATTR(l1i_tlb_refill, ARMV7_PERFCTR_ITLB_REFILL);
-ARMV7_EVENT_ATTR(l1d_cache_refill, ARMV7_PERFCTR_L1_DCACHE_REFILL);
-ARMV7_EVENT_ATTR(l1d_cache, ARMV7_PERFCTR_L1_DCACHE_ACCESS);
-ARMV7_EVENT_ATTR(l1d_tlb_refill, ARMV7_PERFCTR_DTLB_REFILL);
-ARMV7_EVENT_ATTR(ld_retired, ARMV7_PERFCTR_MEM_READ);
-ARMV7_EVENT_ATTR(st_retired, ARMV7_PERFCTR_MEM_WRITE);
-ARMV7_EVENT_ATTR(inst_retired, ARMV7_PERFCTR_INSTR_EXECUTED);
-ARMV7_EVENT_ATTR(exc_taken, ARMV7_PERFCTR_EXC_TAKEN);
-ARMV7_EVENT_ATTR(exc_return, ARMV7_PERFCTR_EXC_EXECUTED);
-ARMV7_EVENT_ATTR(cid_write_retired, ARMV7_PERFCTR_CID_WRITE);
-ARMV7_EVENT_ATTR(pc_write_retired, ARMV7_PERFCTR_PC_WRITE);
-ARMV7_EVENT_ATTR(br_immed_retired, ARMV7_PERFCTR_PC_IMM_BRANCH);
-ARMV7_EVENT_ATTR(br_return_retired, ARMV7_PERFCTR_PC_PROC_RETURN);
-ARMV7_EVENT_ATTR(unaligned_ldst_retired, ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS);
-ARMV7_EVENT_ATTR(br_mis_pred, ARMV7_PERFCTR_PC_BRANCH_MIS_PRED);
-ARMV7_EVENT_ATTR(cpu_cycles, ARMV7_PERFCTR_CLOCK_CYCLES);
-ARMV7_EVENT_ATTR(br_pred, ARMV7_PERFCTR_PC_BRANCH_PRED);
-
-static struct attribute *armv7_pmuv1_event_attrs[] = {
-	&armv7_event_attr_sw_incr.attr.attr,
-	&armv7_event_attr_l1i_cache_refill.attr.attr,
-	&armv7_event_attr_l1i_tlb_refill.attr.attr,
-	&armv7_event_attr_l1d_cache_refill.attr.attr,
-	&armv7_event_attr_l1d_cache.attr.attr,
-	&armv7_event_attr_l1d_tlb_refill.attr.attr,
-	&armv7_event_attr_ld_retired.attr.attr,
-	&armv7_event_attr_st_retired.attr.attr,
-	&armv7_event_attr_inst_retired.attr.attr,
-	&armv7_event_attr_exc_taken.attr.attr,
-	&armv7_event_attr_exc_return.attr.attr,
-	&armv7_event_attr_cid_write_retired.attr.attr,
-	&armv7_event_attr_pc_write_retired.attr.attr,
-	&armv7_event_attr_br_immed_retired.attr.attr,
-	&armv7_event_attr_br_return_retired.attr.attr,
-	&armv7_event_attr_unaligned_ldst_retired.attr.attr,
-	&armv7_event_attr_br_mis_pred.attr.attr,
-	&armv7_event_attr_cpu_cycles.attr.attr,
-	&armv7_event_attr_br_pred.attr.attr,
-	NULL,
-};
-
-static struct attribute_group armv7_pmuv1_events_attr_group = {
-	.name = "events",
-	.attrs = armv7_pmuv1_event_attrs,
-};
-
-ARMV7_EVENT_ATTR(mem_access, ARMV7_PERFCTR_MEM_ACCESS);
-ARMV7_EVENT_ATTR(l1i_cache, ARMV7_PERFCTR_L1_ICACHE_ACCESS);
-ARMV7_EVENT_ATTR(l1d_cache_wb, ARMV7_PERFCTR_L1_DCACHE_WB);
-ARMV7_EVENT_ATTR(l2d_cache, ARMV7_PERFCTR_L2_CACHE_ACCESS);
-ARMV7_EVENT_ATTR(l2d_cache_refill, ARMV7_PERFCTR_L2_CACHE_REFILL);
-ARMV7_EVENT_ATTR(l2d_cache_wb, ARMV7_PERFCTR_L2_CACHE_WB);
-ARMV7_EVENT_ATTR(bus_access, ARMV7_PERFCTR_BUS_ACCESS);
-ARMV7_EVENT_ATTR(memory_error, ARMV7_PERFCTR_MEM_ERROR);
-ARMV7_EVENT_ATTR(inst_spec, ARMV7_PERFCTR_INSTR_SPEC);
-ARMV7_EVENT_ATTR(ttbr_write_retired, ARMV7_PERFCTR_TTBR_WRITE);
-ARMV7_EVENT_ATTR(bus_cycles, ARMV7_PERFCTR_BUS_CYCLES);
-
-static struct attribute *armv7_pmuv2_event_attrs[] = {
-	&armv7_event_attr_sw_incr.attr.attr,
-	&armv7_event_attr_l1i_cache_refill.attr.attr,
-	&armv7_event_attr_l1i_tlb_refill.attr.attr,
-	&armv7_event_attr_l1d_cache_refill.attr.attr,
-	&armv7_event_attr_l1d_cache.attr.attr,
-	&armv7_event_attr_l1d_tlb_refill.attr.attr,
-	&armv7_event_attr_ld_retired.attr.attr,
-	&armv7_event_attr_st_retired.attr.attr,
-	&armv7_event_attr_inst_retired.attr.attr,
-	&armv7_event_attr_exc_taken.attr.attr,
-	&armv7_event_attr_exc_return.attr.attr,
-	&armv7_event_attr_cid_write_retired.attr.attr,
-	&armv7_event_attr_pc_write_retired.attr.attr,
-	&armv7_event_attr_br_immed_retired.attr.attr,
-	&armv7_event_attr_br_return_retired.attr.attr,
-	&armv7_event_attr_unaligned_ldst_retired.attr.attr,
-	&armv7_event_attr_br_mis_pred.attr.attr,
-	&armv7_event_attr_cpu_cycles.attr.attr,
-	&armv7_event_attr_br_pred.attr.attr,
-	&armv7_event_attr_mem_access.attr.attr,
-	&armv7_event_attr_l1i_cache.attr.attr,
-	&armv7_event_attr_l1d_cache_wb.attr.attr,
-	&armv7_event_attr_l2d_cache.attr.attr,
-	&armv7_event_attr_l2d_cache_refill.attr.attr,
-	&armv7_event_attr_l2d_cache_wb.attr.attr,
-	&armv7_event_attr_bus_access.attr.attr,
-	&armv7_event_attr_memory_error.attr.attr,
-	&armv7_event_attr_inst_spec.attr.attr,
-	&armv7_event_attr_ttbr_write_retired.attr.attr,
-	&armv7_event_attr_bus_cycles.attr.attr,
-	NULL,
-};
-
-static struct attribute_group armv7_pmuv2_events_attr_group = {
-	.name = "events",
-	.attrs = armv7_pmuv2_event_attrs,
-};
-
-/*
- * Perf Events' indices
- */
-#define	ARMV7_IDX_CYCLE_COUNTER	0
-#define	ARMV7_IDX_COUNTER0	1
-#define	ARMV7_IDX_COUNTER_LAST(cpu_pmu) \
-	(ARMV7_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1)
-
-#define	ARMV7_MAX_COUNTERS	32
-#define	ARMV7_COUNTER_MASK	(ARMV7_MAX_COUNTERS - 1)
-
-/*
- * ARMv7 low level PMNC access
- */
-
-/*
- * Perf Event to low level counters mapping
- */
-#define	ARMV7_IDX_TO_COUNTER(x)	\
-	(((x) - ARMV7_IDX_COUNTER0) & ARMV7_COUNTER_MASK)
-
-/*
- * Per-CPU PMNC: config reg
- */
-#define ARMV7_PMNC_E		(1 << 0) /* Enable all counters */
-#define ARMV7_PMNC_P		(1 << 1) /* Reset all counters */
-#define ARMV7_PMNC_C		(1 << 2) /* Cycle counter reset */
-#define ARMV7_PMNC_D		(1 << 3) /* CCNT counts every 64th cpu cycle */
-#define ARMV7_PMNC_X		(1 << 4) /* Export to ETM */
-#define ARMV7_PMNC_DP		(1 << 5) /* Disable CCNT if non-invasive debug*/
-#define	ARMV7_PMNC_N_SHIFT	11	 /* Number of counters supported */
-#define	ARMV7_PMNC_N_MASK	0x1f
-#define	ARMV7_PMNC_MASK		0x3f	 /* Mask for writable bits */
-
-/*
- * FLAG: counters overflow flag status reg
- */
-#define	ARMV7_FLAG_MASK		0xffffffff	/* Mask for writable bits */
-#define	ARMV7_OVERFLOWED_MASK	ARMV7_FLAG_MASK
-
-/*
- * PMXEVTYPER: Event selection reg
- */
-#define	ARMV7_EVTYPE_MASK	0xc80000ff	/* Mask for writable bits */
-#define	ARMV7_EVTYPE_EVENT	0xff		/* Mask for EVENT bits */
-
-/*
- * Event filters for PMUv2
- */
-#define	ARMV7_EXCLUDE_PL1	BIT(31)
-#define	ARMV7_EXCLUDE_USER	BIT(30)
-#define	ARMV7_INCLUDE_HYP	BIT(27)
-
-/*
- * Secure debug enable reg
- */
-#define ARMV7_SDER_SUNIDEN	BIT(1) /* Permit non-invasive debug */
-
-static inline u32 armv7_pmnc_read(void)
-{
-	u32 val;
-	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
-	return val;
-}
-
-static inline void armv7_pmnc_write(u32 val)
-{
-	val &= ARMV7_PMNC_MASK;
-	isb();
-	asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
-}
-
-static inline int armv7_pmnc_has_overflowed(u32 pmnc)
-{
-	return pmnc & ARMV7_OVERFLOWED_MASK;
-}
-
-static inline int armv7_pmnc_counter_valid(struct arm_pmu *cpu_pmu, int idx)
-{
-	return idx >= ARMV7_IDX_CYCLE_COUNTER &&
-		idx <= ARMV7_IDX_COUNTER_LAST(cpu_pmu);
-}
-
-static inline int armv7_pmnc_counter_has_overflowed(u32 pmnc, int idx)
-{
-	return pmnc & BIT(ARMV7_IDX_TO_COUNTER(idx));
-}
-
-static inline void armv7_pmnc_select_counter(int idx)
-{
-	u32 counter = ARMV7_IDX_TO_COUNTER(idx);
-	asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (counter));
-	isb();
-}
-
-static inline u64 armv7pmu_read_counter(struct perf_event *event)
-{
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-	u32 value = 0;
-
-	if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) {
-		pr_err("CPU%u reading wrong counter %d\n",
-			smp_processor_id(), idx);
-	} else if (idx == ARMV7_IDX_CYCLE_COUNTER) {
-		asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
-	} else {
-		armv7_pmnc_select_counter(idx);
-		asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (value));
-	}
-
-	return value;
-}
-
-static inline void armv7pmu_write_counter(struct perf_event *event, u64 value)
-{
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-
-	if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) {
-		pr_err("CPU%u writing wrong counter %d\n",
-			smp_processor_id(), idx);
-	} else if (idx == ARMV7_IDX_CYCLE_COUNTER) {
-		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" ((u32)value));
-	} else {
-		armv7_pmnc_select_counter(idx);
-		asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" ((u32)value));
-	}
-}
-
-static inline void armv7_pmnc_write_evtsel(int idx, u32 val)
-{
-	armv7_pmnc_select_counter(idx);
-	val &= ARMV7_EVTYPE_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
-}
-
-static inline void armv7_pmnc_enable_counter(int idx)
-{
-	u32 counter = ARMV7_IDX_TO_COUNTER(idx);
-	asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (BIT(counter)));
-}
-
-static inline void armv7_pmnc_disable_counter(int idx)
-{
-	u32 counter = ARMV7_IDX_TO_COUNTER(idx);
-	asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (BIT(counter)));
-}
-
-static inline void armv7_pmnc_enable_intens(int idx)
-{
-	u32 counter = ARMV7_IDX_TO_COUNTER(idx);
-	asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (BIT(counter)));
-}
-
-static inline void armv7_pmnc_disable_intens(int idx)
-{
-	u32 counter = ARMV7_IDX_TO_COUNTER(idx);
-	asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
-	isb();
-	/* Clear the overflow flag in case an interrupt is pending. */
-	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter)));
-	isb();
-}
-
-static inline u32 armv7_pmnc_getreset_flags(void)
-{
-	u32 val;
-
-	/* Read */
-	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
-
-	/* Write to clear flags */
-	val &= ARMV7_FLAG_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
-
-	return val;
-}
-
-#ifdef DEBUG
-static void armv7_pmnc_dump_regs(struct arm_pmu *cpu_pmu)
-{
-	u32 val;
-	unsigned int cnt;
-
-	pr_info("PMNC registers dump:\n");
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
-	pr_info("PMNC  =0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
-	pr_info("CNTENS=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
-	pr_info("INTENS=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
-	pr_info("FLAGS =0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
-	pr_info("SELECT=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
-	pr_info("CCNT  =0x%08x\n", val);
-
-	for (cnt = ARMV7_IDX_COUNTER0;
-			cnt <= ARMV7_IDX_COUNTER_LAST(cpu_pmu); cnt++) {
-		armv7_pmnc_select_counter(cnt);
-		asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
-		pr_info("CNT[%d] count =0x%08x\n",
-			ARMV7_IDX_TO_COUNTER(cnt), val);
-		asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
-		pr_info("CNT[%d] evtsel=0x%08x\n",
-			ARMV7_IDX_TO_COUNTER(cnt), val);
-	}
-}
-#endif
-
-static void armv7pmu_enable_event(struct perf_event *event)
-{
-	unsigned long flags;
-	struct hw_perf_event *hwc = &event->hw;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-	int idx = hwc->idx;
-
-	if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) {
-		pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n",
-			smp_processor_id(), idx);
-		return;
-	}
-
-	/*
-	 * Enable counter and interrupt, and set the counter to count
-	 * the event that we're interested in.
-	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-
-	/*
-	 * Disable counter
-	 */
-	armv7_pmnc_disable_counter(idx);
-
-	/*
-	 * Set event (if destined for PMNx counters)
-	 * We only need to set the event for the cycle counter if we
-	 * have the ability to perform event filtering.
-	 */
-	if (cpu_pmu->set_event_filter || idx != ARMV7_IDX_CYCLE_COUNTER)
-		armv7_pmnc_write_evtsel(idx, hwc->config_base);
-
-	/*
-	 * Enable interrupt for this counter
-	 */
-	armv7_pmnc_enable_intens(idx);
-
-	/*
-	 * Enable counter
-	 */
-	armv7_pmnc_enable_counter(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void armv7pmu_disable_event(struct perf_event *event)
-{
-	unsigned long flags;
-	struct hw_perf_event *hwc = &event->hw;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-	int idx = hwc->idx;
-
-	if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) {
-		pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n",
-			smp_processor_id(), idx);
-		return;
-	}
-
-	/*
-	 * Disable counter and interrupt
-	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-
-	/*
-	 * Disable counter
-	 */
-	armv7_pmnc_disable_counter(idx);
-
-	/*
-	 * Disable interrupt for this counter
-	 */
-	armv7_pmnc_disable_intens(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static irqreturn_t armv7pmu_handle_irq(struct arm_pmu *cpu_pmu)
-{
-	u32 pmnc;
-	struct perf_sample_data data;
-	struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events);
-	struct pt_regs *regs;
-	int idx;
-
-	/*
-	 * Get and reset the IRQ flags
-	 */
-	pmnc = armv7_pmnc_getreset_flags();
-
-	/*
-	 * Did an overflow occur?
-	 */
-	if (!armv7_pmnc_has_overflowed(pmnc))
-		return IRQ_NONE;
-
-	/*
-	 * Handle the counter(s) overflow(s)
-	 */
-	regs = get_irq_regs();
-
-	for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		/* Ignore if we don't have an event. */
-		if (!event)
-			continue;
-
-		/*
-		 * We have a single interrupt for all counters. Check that
-		 * each counter has overflowed before we process it.
-		 */
-		if (!armv7_pmnc_counter_has_overflowed(pmnc, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event);
-		perf_sample_data_init(&data, 0, hwc->last_period);
-		if (!armpmu_event_set_period(event))
-			continue;
-
-		if (perf_event_overflow(event, &data, regs))
-			cpu_pmu->disable(event);
-	}
-
-	/*
-	 * Handle the pending perf events.
-	 *
-	 * Note: this call *must* be run with interrupts disabled. For
-	 * platforms that can have the PMU interrupts raised as an NMI, this
-	 * will not work.
-	 */
-	irq_work_run();
-
-	return IRQ_HANDLED;
-}
-
-static void armv7pmu_start(struct arm_pmu *cpu_pmu)
-{
-	unsigned long flags;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	/* Enable all counters */
-	armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void armv7pmu_stop(struct arm_pmu *cpu_pmu)
-{
-	unsigned long flags;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	/* Disable all counters */
-	armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static int armv7pmu_get_event_idx(struct pmu_hw_events *cpuc,
-				  struct perf_event *event)
-{
-	int idx;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	unsigned long evtype = hwc->config_base & ARMV7_EVTYPE_EVENT;
-
-	/* Always place a cycle counter into the cycle counter. */
-	if (evtype == ARMV7_PERFCTR_CPU_CYCLES) {
-		if (test_and_set_bit(ARMV7_IDX_CYCLE_COUNTER, cpuc->used_mask))
-			return -EAGAIN;
-
-		return ARMV7_IDX_CYCLE_COUNTER;
-	}
-
-	/*
-	 * For anything other than a cycle counter, try and use
-	 * the events counters
-	 */
-	for (idx = ARMV7_IDX_COUNTER0; idx < cpu_pmu->num_events; ++idx) {
-		if (!test_and_set_bit(idx, cpuc->used_mask))
-			return idx;
-	}
-
-	/* The counters are all in use. */
-	return -EAGAIN;
-}
-
-static void armv7pmu_clear_event_idx(struct pmu_hw_events *cpuc,
-				     struct perf_event *event)
-{
-	clear_bit(event->hw.idx, cpuc->used_mask);
-}
-
-/*
- * Add an event filter to a given event. This will only work for PMUv2 PMUs.
- */
-static int armv7pmu_set_event_filter(struct hw_perf_event *event,
-				     struct perf_event_attr *attr)
-{
-	unsigned long config_base = 0;
-
-	if (attr->exclude_idle)
-		return -EPERM;
-	if (attr->exclude_user)
-		config_base |= ARMV7_EXCLUDE_USER;
-	if (attr->exclude_kernel)
-		config_base |= ARMV7_EXCLUDE_PL1;
-	if (!attr->exclude_hv)
-		config_base |= ARMV7_INCLUDE_HYP;
-
-	/*
-	 * Install the filter into config_base as this is used to
-	 * construct the event type.
-	 */
-	event->config_base = config_base;
-
-	return 0;
-}
-
-static void armv7pmu_reset(void *info)
-{
-	struct arm_pmu *cpu_pmu = (struct arm_pmu *)info;
-	u32 idx, nb_cnt = cpu_pmu->num_events, val;
-
-	if (cpu_pmu->secure_access) {
-		asm volatile("mrc p15, 0, %0, c1, c1, 1" : "=r" (val));
-		val |= ARMV7_SDER_SUNIDEN;
-		asm volatile("mcr p15, 0, %0, c1, c1, 1" : : "r" (val));
-	}
-
-	/* The counter and interrupt enable registers are unknown at reset. */
-	for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) {
-		armv7_pmnc_disable_counter(idx);
-		armv7_pmnc_disable_intens(idx);
-	}
-
-	/* Initialize & Reset PMNC: C and P bits */
-	armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
-}
-
-static int armv7_a8_map_event(struct perf_event *event)
-{
-	return armpmu_map_event(event, &armv7_a8_perf_map,
-				&armv7_a8_perf_cache_map, 0xFF);
-}
-
-static int armv7_a9_map_event(struct perf_event *event)
-{
-	return armpmu_map_event(event, &armv7_a9_perf_map,
-				&armv7_a9_perf_cache_map, 0xFF);
-}
-
-static int armv7_a5_map_event(struct perf_event *event)
-{
-	return armpmu_map_event(event, &armv7_a5_perf_map,
-				&armv7_a5_perf_cache_map, 0xFF);
-}
-
-static int armv7_a15_map_event(struct perf_event *event)
-{
-	return armpmu_map_event(event, &armv7_a15_perf_map,
-				&armv7_a15_perf_cache_map, 0xFF);
-}
-
-static int armv7_a7_map_event(struct perf_event *event)
-{
-	return armpmu_map_event(event, &armv7_a7_perf_map,
-				&armv7_a7_perf_cache_map, 0xFF);
-}
-
-static int armv7_a12_map_event(struct perf_event *event)
-{
-	return armpmu_map_event(event, &armv7_a12_perf_map,
-				&armv7_a12_perf_cache_map, 0xFF);
-}
-
-static int krait_map_event(struct perf_event *event)
-{
-	return armpmu_map_event(event, &krait_perf_map,
-				&krait_perf_cache_map, 0xFFFFF);
-}
-
-static int krait_map_event_no_branch(struct perf_event *event)
-{
-	return armpmu_map_event(event, &krait_perf_map_no_branch,
-				&krait_perf_cache_map, 0xFFFFF);
-}
-
-static int scorpion_map_event(struct perf_event *event)
-{
-	return armpmu_map_event(event, &scorpion_perf_map,
-				&scorpion_perf_cache_map, 0xFFFFF);
-}
-
-static void armv7pmu_init(struct arm_pmu *cpu_pmu)
-{
-	cpu_pmu->handle_irq	= armv7pmu_handle_irq;
-	cpu_pmu->enable		= armv7pmu_enable_event;
-	cpu_pmu->disable	= armv7pmu_disable_event;
-	cpu_pmu->read_counter	= armv7pmu_read_counter;
-	cpu_pmu->write_counter	= armv7pmu_write_counter;
-	cpu_pmu->get_event_idx	= armv7pmu_get_event_idx;
-	cpu_pmu->clear_event_idx = armv7pmu_clear_event_idx;
-	cpu_pmu->start		= armv7pmu_start;
-	cpu_pmu->stop		= armv7pmu_stop;
-	cpu_pmu->reset		= armv7pmu_reset;
-};
-
-static void armv7_read_num_pmnc_events(void *info)
-{
-	int *nb_cnt = info;
-
-	/* Read the nb of CNTx counters supported from PMNC */
-	*nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
-
-	/* Add the CPU cycles counter */
-	*nb_cnt += 1;
-}
-
-static int armv7_probe_num_events(struct arm_pmu *arm_pmu)
-{
-	return smp_call_function_any(&arm_pmu->supported_cpus,
-				     armv7_read_num_pmnc_events,
-				     &arm_pmu->num_events, 1);
-}
-
-static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	armv7pmu_init(cpu_pmu);
-	cpu_pmu->name		= "armv7_cortex_a8";
-	cpu_pmu->map_event	= armv7_a8_map_event;
-	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
-		&armv7_pmuv1_events_attr_group;
-	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
-		&armv7_pmu_format_attr_group;
-	return armv7_probe_num_events(cpu_pmu);
-}
-
-static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	armv7pmu_init(cpu_pmu);
-	cpu_pmu->name		= "armv7_cortex_a9";
-	cpu_pmu->map_event	= armv7_a9_map_event;
-	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
-		&armv7_pmuv1_events_attr_group;
-	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
-		&armv7_pmu_format_attr_group;
-	return armv7_probe_num_events(cpu_pmu);
-}
-
-static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	armv7pmu_init(cpu_pmu);
-	cpu_pmu->name		= "armv7_cortex_a5";
-	cpu_pmu->map_event	= armv7_a5_map_event;
-	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
-		&armv7_pmuv1_events_attr_group;
-	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
-		&armv7_pmu_format_attr_group;
-	return armv7_probe_num_events(cpu_pmu);
-}
-
-static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	armv7pmu_init(cpu_pmu);
-	cpu_pmu->name		= "armv7_cortex_a15";
-	cpu_pmu->map_event	= armv7_a15_map_event;
-	cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
-	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
-		&armv7_pmuv2_events_attr_group;
-	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
-		&armv7_pmu_format_attr_group;
-	return armv7_probe_num_events(cpu_pmu);
-}
-
-static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	armv7pmu_init(cpu_pmu);
-	cpu_pmu->name		= "armv7_cortex_a7";
-	cpu_pmu->map_event	= armv7_a7_map_event;
-	cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
-	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
-		&armv7_pmuv2_events_attr_group;
-	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
-		&armv7_pmu_format_attr_group;
-	return armv7_probe_num_events(cpu_pmu);
-}
-
-static int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	armv7pmu_init(cpu_pmu);
-	cpu_pmu->name		= "armv7_cortex_a12";
-	cpu_pmu->map_event	= armv7_a12_map_event;
-	cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
-	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
-		&armv7_pmuv2_events_attr_group;
-	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
-		&armv7_pmu_format_attr_group;
-	return armv7_probe_num_events(cpu_pmu);
-}
-
-static int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	int ret = armv7_a12_pmu_init(cpu_pmu);
-	cpu_pmu->name = "armv7_cortex_a17";
-	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
-		&armv7_pmuv2_events_attr_group;
-	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
-		&armv7_pmu_format_attr_group;
-	return ret;
-}
-
-/*
- * Krait Performance Monitor Region Event Selection Register (PMRESRn)
- *
- *            31   30     24     16     8      0
- *            +--------------------------------+
- *  PMRESR0   | EN |  CC  |  CC  |  CC  |  CC  |   N = 1, R = 0
- *            +--------------------------------+
- *  PMRESR1   | EN |  CC  |  CC  |  CC  |  CC  |   N = 1, R = 1
- *            +--------------------------------+
- *  PMRESR2   | EN |  CC  |  CC  |  CC  |  CC  |   N = 1, R = 2
- *            +--------------------------------+
- *  VPMRESR0  | EN |  CC  |  CC  |  CC  |  CC  |   N = 2, R = ?
- *            +--------------------------------+
- *              EN | G=3  | G=2  | G=1  | G=0
- *
- *  Event Encoding:
- *
- *      hwc->config_base = 0xNRCCG
- *
- *      N  = prefix, 1 for Krait CPU (PMRESRn), 2 for Venum VFP (VPMRESR)
- *      R  = region register
- *      CC = class of events the group G is choosing from
- *      G  = group or particular event
- *
- *  Example: 0x12021 is a Krait CPU event in PMRESR2's group 1 with code 2
- *
- *  A region (R) corresponds to a piece of the CPU (execution unit, instruction
- *  unit, etc.) while the event code (CC) corresponds to a particular class of
- *  events (interrupts for example). An event code is broken down into
- *  groups (G) that can be mapped into the PMU (irq, fiqs, and irq+fiqs for
- *  example).
- */
-
-#define KRAIT_EVENT		(1 << 16)
-#define VENUM_EVENT		(2 << 16)
-#define KRAIT_EVENT_MASK	(KRAIT_EVENT | VENUM_EVENT)
-#define PMRESRn_EN		BIT(31)
-
-#define EVENT_REGION(event)	(((event) >> 12) & 0xf)		/* R */
-#define EVENT_GROUP(event)	((event) & 0xf)			/* G */
-#define EVENT_CODE(event)	(((event) >> 4) & 0xff)		/* CC */
-#define EVENT_VENUM(event)	(!!(event & VENUM_EVENT))	/* N=2 */
-#define EVENT_CPU(event)	(!!(event & KRAIT_EVENT))	/* N=1 */
-
-static u32 krait_read_pmresrn(int n)
-{
-	u32 val;
-
-	switch (n) {
-	case 0:
-		asm volatile("mrc p15, 1, %0, c9, c15, 0" : "=r" (val));
-		break;
-	case 1:
-		asm volatile("mrc p15, 1, %0, c9, c15, 1" : "=r" (val));
-		break;
-	case 2:
-		asm volatile("mrc p15, 1, %0, c9, c15, 2" : "=r" (val));
-		break;
-	default:
-		BUG(); /* Should be validated in krait_pmu_get_event_idx() */
-	}
-
-	return val;
-}
-
-static void krait_write_pmresrn(int n, u32 val)
-{
-	switch (n) {
-	case 0:
-		asm volatile("mcr p15, 1, %0, c9, c15, 0" : : "r" (val));
-		break;
-	case 1:
-		asm volatile("mcr p15, 1, %0, c9, c15, 1" : : "r" (val));
-		break;
-	case 2:
-		asm volatile("mcr p15, 1, %0, c9, c15, 2" : : "r" (val));
-		break;
-	default:
-		BUG(); /* Should be validated in krait_pmu_get_event_idx() */
-	}
-}
-
-static u32 venum_read_pmresr(void)
-{
-	u32 val;
-	asm volatile("mrc p10, 7, %0, c11, c0, 0" : "=r" (val));
-	return val;
-}
-
-static void venum_write_pmresr(u32 val)
-{
-	asm volatile("mcr p10, 7, %0, c11, c0, 0" : : "r" (val));
-}
-
-static void venum_pre_pmresr(u32 *venum_orig_val, u32 *fp_orig_val)
-{
-	u32 venum_new_val;
-	u32 fp_new_val;
-
-	BUG_ON(preemptible());
-	/* CPACR Enable CP10 and CP11 access */
-	*venum_orig_val = get_copro_access();
-	venum_new_val = *venum_orig_val | CPACC_SVC(10) | CPACC_SVC(11);
-	set_copro_access(venum_new_val);
-
-	/* Enable FPEXC */
-	*fp_orig_val = fmrx(FPEXC);
-	fp_new_val = *fp_orig_val | FPEXC_EN;
-	fmxr(FPEXC, fp_new_val);
-}
-
-static void venum_post_pmresr(u32 venum_orig_val, u32 fp_orig_val)
-{
-	BUG_ON(preemptible());
-	/* Restore FPEXC */
-	fmxr(FPEXC, fp_orig_val);
-	isb();
-	/* Restore CPACR */
-	set_copro_access(venum_orig_val);
-}
-
-static u32 krait_get_pmresrn_event(unsigned int region)
-{
-	static const u32 pmresrn_table[] = { KRAIT_PMRESR0_GROUP0,
-					     KRAIT_PMRESR1_GROUP0,
-					     KRAIT_PMRESR2_GROUP0 };
-	return pmresrn_table[region];
-}
-
-static void krait_evt_setup(int idx, u32 config_base)
-{
-	u32 val;
-	u32 mask;
-	u32 vval, fval;
-	unsigned int region = EVENT_REGION(config_base);
-	unsigned int group = EVENT_GROUP(config_base);
-	unsigned int code = EVENT_CODE(config_base);
-	unsigned int group_shift;
-	bool venum_event = EVENT_VENUM(config_base);
-
-	group_shift = group * 8;
-	mask = 0xff << group_shift;
-
-	/* Configure evtsel for the region and group */
-	if (venum_event)
-		val = KRAIT_VPMRESR0_GROUP0;
-	else
-		val = krait_get_pmresrn_event(region);
-	val += group;
-	/* Mix in mode-exclusion bits */
-	val |= config_base & (ARMV7_EXCLUDE_USER | ARMV7_EXCLUDE_PL1);
-	armv7_pmnc_write_evtsel(idx, val);
-
-	if (venum_event) {
-		venum_pre_pmresr(&vval, &fval);
-		val = venum_read_pmresr();
-		val &= ~mask;
-		val |= code << group_shift;
-		val |= PMRESRn_EN;
-		venum_write_pmresr(val);
-		venum_post_pmresr(vval, fval);
-	} else {
-		val = krait_read_pmresrn(region);
-		val &= ~mask;
-		val |= code << group_shift;
-		val |= PMRESRn_EN;
-		krait_write_pmresrn(region, val);
-	}
-}
-
-static u32 clear_pmresrn_group(u32 val, int group)
-{
-	u32 mask;
-	int group_shift;
-
-	group_shift = group * 8;
-	mask = 0xff << group_shift;
-	val &= ~mask;
-
-	/* Don't clear enable bit if entire region isn't disabled */
-	if (val & ~PMRESRn_EN)
-		return val |= PMRESRn_EN;
-
-	return 0;
-}
-
-static void krait_clearpmu(u32 config_base)
-{
-	u32 val;
-	u32 vval, fval;
-	unsigned int region = EVENT_REGION(config_base);
-	unsigned int group = EVENT_GROUP(config_base);
-	bool venum_event = EVENT_VENUM(config_base);
-
-	if (venum_event) {
-		venum_pre_pmresr(&vval, &fval);
-		val = venum_read_pmresr();
-		val = clear_pmresrn_group(val, group);
-		venum_write_pmresr(val);
-		venum_post_pmresr(vval, fval);
-	} else {
-		val = krait_read_pmresrn(region);
-		val = clear_pmresrn_group(val, group);
-		krait_write_pmresrn(region, val);
-	}
-}
-
-static void krait_pmu_disable_event(struct perf_event *event)
-{
-	unsigned long flags;
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-
-	/* Disable counter and interrupt */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-
-	/* Disable counter */
-	armv7_pmnc_disable_counter(idx);
-
-	/*
-	 * Clear pmresr code (if destined for PMNx counters)
-	 */
-	if (hwc->config_base & KRAIT_EVENT_MASK)
-		krait_clearpmu(hwc->config_base);
-
-	/* Disable interrupt for this counter */
-	armv7_pmnc_disable_intens(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void krait_pmu_enable_event(struct perf_event *event)
-{
-	unsigned long flags;
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-
-	/*
-	 * Enable counter and interrupt, and set the counter to count
-	 * the event that we're interested in.
-	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-
-	/* Disable counter */
-	armv7_pmnc_disable_counter(idx);
-
-	/*
-	 * Set event (if destined for PMNx counters)
-	 * We set the event for the cycle counter because we
-	 * have the ability to perform event filtering.
-	 */
-	if (hwc->config_base & KRAIT_EVENT_MASK)
-		krait_evt_setup(idx, hwc->config_base);
-	else
-		armv7_pmnc_write_evtsel(idx, hwc->config_base);
-
-	/* Enable interrupt for this counter */
-	armv7_pmnc_enable_intens(idx);
-
-	/* Enable counter */
-	armv7_pmnc_enable_counter(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void krait_pmu_reset(void *info)
-{
-	u32 vval, fval;
-	struct arm_pmu *cpu_pmu = info;
-	u32 idx, nb_cnt = cpu_pmu->num_events;
-
-	armv7pmu_reset(info);
-
-	/* Clear all pmresrs */
-	krait_write_pmresrn(0, 0);
-	krait_write_pmresrn(1, 0);
-	krait_write_pmresrn(2, 0);
-
-	venum_pre_pmresr(&vval, &fval);
-	venum_write_pmresr(0);
-	venum_post_pmresr(vval, fval);
-
-	/* Reset PMxEVNCTCR to sane default */
-	for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) {
-		armv7_pmnc_select_counter(idx);
-		asm volatile("mcr p15, 0, %0, c9, c15, 0" : : "r" (0));
-	}
-
-}
-
-static int krait_event_to_bit(struct perf_event *event, unsigned int region,
-			      unsigned int group)
-{
-	int bit;
-	struct hw_perf_event *hwc = &event->hw;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-
-	if (hwc->config_base & VENUM_EVENT)
-		bit = KRAIT_VPMRESR0_GROUP0;
-	else
-		bit = krait_get_pmresrn_event(region);
-	bit -= krait_get_pmresrn_event(0);
-	bit += group;
-	/*
-	 * Lower bits are reserved for use by the counters (see
-	 * armv7pmu_get_event_idx() for more info)
-	 */
-	bit += ARMV7_IDX_COUNTER_LAST(cpu_pmu) + 1;
-
-	return bit;
-}
-
-/*
- * We check for column exclusion constraints here.
- * Two events cant use the same group within a pmresr register.
- */
-static int krait_pmu_get_event_idx(struct pmu_hw_events *cpuc,
-				   struct perf_event *event)
-{
-	int idx;
-	int bit = -1;
-	struct hw_perf_event *hwc = &event->hw;
-	unsigned int region = EVENT_REGION(hwc->config_base);
-	unsigned int code = EVENT_CODE(hwc->config_base);
-	unsigned int group = EVENT_GROUP(hwc->config_base);
-	bool venum_event = EVENT_VENUM(hwc->config_base);
-	bool krait_event = EVENT_CPU(hwc->config_base);
-
-	if (venum_event || krait_event) {
-		/* Ignore invalid events */
-		if (group > 3 || region > 2)
-			return -EINVAL;
-		if (venum_event && (code & 0xe0))
-			return -EINVAL;
-
-		bit = krait_event_to_bit(event, region, group);
-		if (test_and_set_bit(bit, cpuc->used_mask))
-			return -EAGAIN;
-	}
-
-	idx = armv7pmu_get_event_idx(cpuc, event);
-	if (idx < 0 && bit >= 0)
-		clear_bit(bit, cpuc->used_mask);
-
-	return idx;
-}
-
-static void krait_pmu_clear_event_idx(struct pmu_hw_events *cpuc,
-				      struct perf_event *event)
-{
-	int bit;
-	struct hw_perf_event *hwc = &event->hw;
-	unsigned int region = EVENT_REGION(hwc->config_base);
-	unsigned int group = EVENT_GROUP(hwc->config_base);
-	bool venum_event = EVENT_VENUM(hwc->config_base);
-	bool krait_event = EVENT_CPU(hwc->config_base);
-
-	armv7pmu_clear_event_idx(cpuc, event);
-	if (venum_event || krait_event) {
-		bit = krait_event_to_bit(event, region, group);
-		clear_bit(bit, cpuc->used_mask);
-	}
-}
-
-static int krait_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	armv7pmu_init(cpu_pmu);
-	cpu_pmu->name		= "armv7_krait";
-	/* Some early versions of Krait don't support PC write events */
-	if (of_property_read_bool(cpu_pmu->plat_device->dev.of_node,
-				  "qcom,no-pc-write"))
-		cpu_pmu->map_event = krait_map_event_no_branch;
-	else
-		cpu_pmu->map_event = krait_map_event;
-	cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
-	cpu_pmu->reset		= krait_pmu_reset;
-	cpu_pmu->enable		= krait_pmu_enable_event;
-	cpu_pmu->disable	= krait_pmu_disable_event;
-	cpu_pmu->get_event_idx	= krait_pmu_get_event_idx;
-	cpu_pmu->clear_event_idx = krait_pmu_clear_event_idx;
-	return armv7_probe_num_events(cpu_pmu);
-}
-
-/*
- * Scorpion Local Performance Monitor Register (LPMn)
- *
- *            31   30     24     16     8      0
- *            +--------------------------------+
- *  LPM0      | EN |  CC  |  CC  |  CC  |  CC  |   N = 1, R = 0
- *            +--------------------------------+
- *  LPM1      | EN |  CC  |  CC  |  CC  |  CC  |   N = 1, R = 1
- *            +--------------------------------+
- *  LPM2      | EN |  CC  |  CC  |  CC  |  CC  |   N = 1, R = 2
- *            +--------------------------------+
- *  L2LPM     | EN |  CC  |  CC  |  CC  |  CC  |   N = 1, R = 3
- *            +--------------------------------+
- *  VLPM      | EN |  CC  |  CC  |  CC  |  CC  |   N = 2, R = ?
- *            +--------------------------------+
- *              EN | G=3  | G=2  | G=1  | G=0
- *
- *
- *  Event Encoding:
- *
- *      hwc->config_base = 0xNRCCG
- *
- *      N  = prefix, 1 for Scorpion CPU (LPMn/L2LPM), 2 for Venum VFP (VLPM)
- *      R  = region register
- *      CC = class of events the group G is choosing from
- *      G  = group or particular event
- *
- *  Example: 0x12021 is a Scorpion CPU event in LPM2's group 1 with code 2
- *
- *  A region (R) corresponds to a piece of the CPU (execution unit, instruction
- *  unit, etc.) while the event code (CC) corresponds to a particular class of
- *  events (interrupts for example). An event code is broken down into
- *  groups (G) that can be mapped into the PMU (irq, fiqs, and irq+fiqs for
- *  example).
- */
-
-static u32 scorpion_read_pmresrn(int n)
-{
-	u32 val;
-
-	switch (n) {
-	case 0:
-		asm volatile("mrc p15, 0, %0, c15, c0, 0" : "=r" (val));
-		break;
-	case 1:
-		asm volatile("mrc p15, 1, %0, c15, c0, 0" : "=r" (val));
-		break;
-	case 2:
-		asm volatile("mrc p15, 2, %0, c15, c0, 0" : "=r" (val));
-		break;
-	case 3:
-		asm volatile("mrc p15, 3, %0, c15, c2, 0" : "=r" (val));
-		break;
-	default:
-		BUG(); /* Should be validated in scorpion_pmu_get_event_idx() */
-	}
-
-	return val;
-}
-
-static void scorpion_write_pmresrn(int n, u32 val)
-{
-	switch (n) {
-	case 0:
-		asm volatile("mcr p15, 0, %0, c15, c0, 0" : : "r" (val));
-		break;
-	case 1:
-		asm volatile("mcr p15, 1, %0, c15, c0, 0" : : "r" (val));
-		break;
-	case 2:
-		asm volatile("mcr p15, 2, %0, c15, c0, 0" : : "r" (val));
-		break;
-	case 3:
-		asm volatile("mcr p15, 3, %0, c15, c2, 0" : : "r" (val));
-		break;
-	default:
-		BUG(); /* Should be validated in scorpion_pmu_get_event_idx() */
-	}
-}
-
-static u32 scorpion_get_pmresrn_event(unsigned int region)
-{
-	static const u32 pmresrn_table[] = { SCORPION_LPM0_GROUP0,
-					     SCORPION_LPM1_GROUP0,
-					     SCORPION_LPM2_GROUP0,
-					     SCORPION_L2LPM_GROUP0 };
-	return pmresrn_table[region];
-}
-
-static void scorpion_evt_setup(int idx, u32 config_base)
-{
-	u32 val;
-	u32 mask;
-	u32 vval, fval;
-	unsigned int region = EVENT_REGION(config_base);
-	unsigned int group = EVENT_GROUP(config_base);
-	unsigned int code = EVENT_CODE(config_base);
-	unsigned int group_shift;
-	bool venum_event = EVENT_VENUM(config_base);
-
-	group_shift = group * 8;
-	mask = 0xff << group_shift;
-
-	/* Configure evtsel for the region and group */
-	if (venum_event)
-		val = SCORPION_VLPM_GROUP0;
-	else
-		val = scorpion_get_pmresrn_event(region);
-	val += group;
-	/* Mix in mode-exclusion bits */
-	val |= config_base & (ARMV7_EXCLUDE_USER | ARMV7_EXCLUDE_PL1);
-	armv7_pmnc_write_evtsel(idx, val);
-
-	asm volatile("mcr p15, 0, %0, c9, c15, 0" : : "r" (0));
-
-	if (venum_event) {
-		venum_pre_pmresr(&vval, &fval);
-		val = venum_read_pmresr();
-		val &= ~mask;
-		val |= code << group_shift;
-		val |= PMRESRn_EN;
-		venum_write_pmresr(val);
-		venum_post_pmresr(vval, fval);
-	} else {
-		val = scorpion_read_pmresrn(region);
-		val &= ~mask;
-		val |= code << group_shift;
-		val |= PMRESRn_EN;
-		scorpion_write_pmresrn(region, val);
-	}
-}
-
-static void scorpion_clearpmu(u32 config_base)
-{
-	u32 val;
-	u32 vval, fval;
-	unsigned int region = EVENT_REGION(config_base);
-	unsigned int group = EVENT_GROUP(config_base);
-	bool venum_event = EVENT_VENUM(config_base);
-
-	if (venum_event) {
-		venum_pre_pmresr(&vval, &fval);
-		val = venum_read_pmresr();
-		val = clear_pmresrn_group(val, group);
-		venum_write_pmresr(val);
-		venum_post_pmresr(vval, fval);
-	} else {
-		val = scorpion_read_pmresrn(region);
-		val = clear_pmresrn_group(val, group);
-		scorpion_write_pmresrn(region, val);
-	}
-}
-
-static void scorpion_pmu_disable_event(struct perf_event *event)
-{
-	unsigned long flags;
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-
-	/* Disable counter and interrupt */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-
-	/* Disable counter */
-	armv7_pmnc_disable_counter(idx);
-
-	/*
-	 * Clear pmresr code (if destined for PMNx counters)
-	 */
-	if (hwc->config_base & KRAIT_EVENT_MASK)
-		scorpion_clearpmu(hwc->config_base);
-
-	/* Disable interrupt for this counter */
-	armv7_pmnc_disable_intens(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void scorpion_pmu_enable_event(struct perf_event *event)
-{
-	unsigned long flags;
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-
-	/*
-	 * Enable counter and interrupt, and set the counter to count
-	 * the event that we're interested in.
-	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-
-	/* Disable counter */
-	armv7_pmnc_disable_counter(idx);
-
-	/*
-	 * Set event (if destined for PMNx counters)
-	 * We don't set the event for the cycle counter because we
-	 * don't have the ability to perform event filtering.
-	 */
-	if (hwc->config_base & KRAIT_EVENT_MASK)
-		scorpion_evt_setup(idx, hwc->config_base);
-	else if (idx != ARMV7_IDX_CYCLE_COUNTER)
-		armv7_pmnc_write_evtsel(idx, hwc->config_base);
-
-	/* Enable interrupt for this counter */
-	armv7_pmnc_enable_intens(idx);
-
-	/* Enable counter */
-	armv7_pmnc_enable_counter(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void scorpion_pmu_reset(void *info)
-{
-	u32 vval, fval;
-	struct arm_pmu *cpu_pmu = info;
-	u32 idx, nb_cnt = cpu_pmu->num_events;
-
-	armv7pmu_reset(info);
-
-	/* Clear all pmresrs */
-	scorpion_write_pmresrn(0, 0);
-	scorpion_write_pmresrn(1, 0);
-	scorpion_write_pmresrn(2, 0);
-	scorpion_write_pmresrn(3, 0);
-
-	venum_pre_pmresr(&vval, &fval);
-	venum_write_pmresr(0);
-	venum_post_pmresr(vval, fval);
-
-	/* Reset PMxEVNCTCR to sane default */
-	for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) {
-		armv7_pmnc_select_counter(idx);
-		asm volatile("mcr p15, 0, %0, c9, c15, 0" : : "r" (0));
-	}
-}
-
-static int scorpion_event_to_bit(struct perf_event *event, unsigned int region,
-			      unsigned int group)
-{
-	int bit;
-	struct hw_perf_event *hwc = &event->hw;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-
-	if (hwc->config_base & VENUM_EVENT)
-		bit = SCORPION_VLPM_GROUP0;
-	else
-		bit = scorpion_get_pmresrn_event(region);
-	bit -= scorpion_get_pmresrn_event(0);
-	bit += group;
-	/*
-	 * Lower bits are reserved for use by the counters (see
-	 * armv7pmu_get_event_idx() for more info)
-	 */
-	bit += ARMV7_IDX_COUNTER_LAST(cpu_pmu) + 1;
-
-	return bit;
-}
-
-/*
- * We check for column exclusion constraints here.
- * Two events cant use the same group within a pmresr register.
- */
-static int scorpion_pmu_get_event_idx(struct pmu_hw_events *cpuc,
-				   struct perf_event *event)
-{
-	int idx;
-	int bit = -1;
-	struct hw_perf_event *hwc = &event->hw;
-	unsigned int region = EVENT_REGION(hwc->config_base);
-	unsigned int group = EVENT_GROUP(hwc->config_base);
-	bool venum_event = EVENT_VENUM(hwc->config_base);
-	bool scorpion_event = EVENT_CPU(hwc->config_base);
-
-	if (venum_event || scorpion_event) {
-		/* Ignore invalid events */
-		if (group > 3 || region > 3)
-			return -EINVAL;
-
-		bit = scorpion_event_to_bit(event, region, group);
-		if (test_and_set_bit(bit, cpuc->used_mask))
-			return -EAGAIN;
-	}
-
-	idx = armv7pmu_get_event_idx(cpuc, event);
-	if (idx < 0 && bit >= 0)
-		clear_bit(bit, cpuc->used_mask);
-
-	return idx;
-}
-
-static void scorpion_pmu_clear_event_idx(struct pmu_hw_events *cpuc,
-				      struct perf_event *event)
-{
-	int bit;
-	struct hw_perf_event *hwc = &event->hw;
-	unsigned int region = EVENT_REGION(hwc->config_base);
-	unsigned int group = EVENT_GROUP(hwc->config_base);
-	bool venum_event = EVENT_VENUM(hwc->config_base);
-	bool scorpion_event = EVENT_CPU(hwc->config_base);
-
-	armv7pmu_clear_event_idx(cpuc, event);
-	if (venum_event || scorpion_event) {
-		bit = scorpion_event_to_bit(event, region, group);
-		clear_bit(bit, cpuc->used_mask);
-	}
-}
-
-static int scorpion_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	armv7pmu_init(cpu_pmu);
-	cpu_pmu->name		= "armv7_scorpion";
-	cpu_pmu->map_event	= scorpion_map_event;
-	cpu_pmu->reset		= scorpion_pmu_reset;
-	cpu_pmu->enable		= scorpion_pmu_enable_event;
-	cpu_pmu->disable	= scorpion_pmu_disable_event;
-	cpu_pmu->get_event_idx	= scorpion_pmu_get_event_idx;
-	cpu_pmu->clear_event_idx = scorpion_pmu_clear_event_idx;
-	return armv7_probe_num_events(cpu_pmu);
-}
-
-static int scorpion_mp_pmu_init(struct arm_pmu *cpu_pmu)
-{
-	armv7pmu_init(cpu_pmu);
-	cpu_pmu->name		= "armv7_scorpion_mp";
-	cpu_pmu->map_event	= scorpion_map_event;
-	cpu_pmu->reset		= scorpion_pmu_reset;
-	cpu_pmu->enable		= scorpion_pmu_enable_event;
-	cpu_pmu->disable	= scorpion_pmu_disable_event;
-	cpu_pmu->get_event_idx	= scorpion_pmu_get_event_idx;
-	cpu_pmu->clear_event_idx = scorpion_pmu_clear_event_idx;
-	return armv7_probe_num_events(cpu_pmu);
-}
-
-static const struct of_device_id armv7_pmu_of_device_ids[] = {
-	{.compatible = "arm,cortex-a17-pmu",	.data = armv7_a17_pmu_init},
-	{.compatible = "arm,cortex-a15-pmu",	.data = armv7_a15_pmu_init},
-	{.compatible = "arm,cortex-a12-pmu",	.data = armv7_a12_pmu_init},
-	{.compatible = "arm,cortex-a9-pmu",	.data = armv7_a9_pmu_init},
-	{.compatible = "arm,cortex-a8-pmu",	.data = armv7_a8_pmu_init},
-	{.compatible = "arm,cortex-a7-pmu",	.data = armv7_a7_pmu_init},
-	{.compatible = "arm,cortex-a5-pmu",	.data = armv7_a5_pmu_init},
-	{.compatible = "qcom,krait-pmu",	.data = krait_pmu_init},
-	{.compatible = "qcom,scorpion-pmu",	.data = scorpion_pmu_init},
-	{.compatible = "qcom,scorpion-mp-pmu",	.data = scorpion_mp_pmu_init},
-	{},
-};
-
-static const struct pmu_probe_info armv7_pmu_probe_table[] = {
-	ARM_PMU_PROBE(ARM_CPU_PART_CORTEX_A8, armv7_a8_pmu_init),
-	ARM_PMU_PROBE(ARM_CPU_PART_CORTEX_A9, armv7_a9_pmu_init),
-	{ /* sentinel value */ }
-};
-
-
-static int armv7_pmu_device_probe(struct platform_device *pdev)
-{
-	return arm_pmu_device_probe(pdev, armv7_pmu_of_device_ids,
-				    armv7_pmu_probe_table);
-}
-
-static struct platform_driver armv7_pmu_driver = {
-	.driver		= {
-		.name	= "armv7-pmu",
-		.of_match_table = armv7_pmu_of_device_ids,
-		.suppress_bind_attrs = true,
-	},
-	.probe		= armv7_pmu_device_probe,
-};
-
-builtin_platform_driver(armv7_pmu_driver);
-#endif	/* CONFIG_CPU_V7 */
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
deleted file mode 100644
index f6cdcacfb96d..000000000000
--- a/arch/arm/kernel/perf_event_xscale.c
+++ /dev/null
@@ -1,776 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ARMv5 [xscale] Performance counter handling code.
- *
- * Copyright (C) 2010, ARM Ltd., Will Deacon <will.deacon@arm.com>
- *
- * Based on the previous xscale OProfile code.
- *
- * There are two variants of the xscale PMU that we support:
- * 	- xscale1pmu: 2 event counters and a cycle counter
- * 	- xscale2pmu: 4 event counters and a cycle counter
- * The two variants share event definitions, but have different
- * PMU structures.
- */
-
-#ifdef CONFIG_CPU_XSCALE
-
-#include <asm/cputype.h>
-#include <asm/irq_regs.h>
-
-#include <linux/of.h>
-#include <linux/perf/arm_pmu.h>
-#include <linux/platform_device.h>
-
-enum xscale_perf_types {
-	XSCALE_PERFCTR_ICACHE_MISS		= 0x00,
-	XSCALE_PERFCTR_ICACHE_NO_DELIVER	= 0x01,
-	XSCALE_PERFCTR_DATA_STALL		= 0x02,
-	XSCALE_PERFCTR_ITLB_MISS		= 0x03,
-	XSCALE_PERFCTR_DTLB_MISS		= 0x04,
-	XSCALE_PERFCTR_BRANCH			= 0x05,
-	XSCALE_PERFCTR_BRANCH_MISS		= 0x06,
-	XSCALE_PERFCTR_INSTRUCTION		= 0x07,
-	XSCALE_PERFCTR_DCACHE_FULL_STALL	= 0x08,
-	XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG	= 0x09,
-	XSCALE_PERFCTR_DCACHE_ACCESS		= 0x0A,
-	XSCALE_PERFCTR_DCACHE_MISS		= 0x0B,
-	XSCALE_PERFCTR_DCACHE_WRITE_BACK	= 0x0C,
-	XSCALE_PERFCTR_PC_CHANGED		= 0x0D,
-	XSCALE_PERFCTR_BCU_REQUEST		= 0x10,
-	XSCALE_PERFCTR_BCU_FULL			= 0x11,
-	XSCALE_PERFCTR_BCU_DRAIN		= 0x12,
-	XSCALE_PERFCTR_BCU_ECC_NO_ELOG		= 0x14,
-	XSCALE_PERFCTR_BCU_1_BIT_ERR		= 0x15,
-	XSCALE_PERFCTR_RMW			= 0x16,
-	/* XSCALE_PERFCTR_CCNT is not hardware defined */
-	XSCALE_PERFCTR_CCNT			= 0xFE,
-	XSCALE_PERFCTR_UNUSED			= 0xFF,
-};
-
-enum xscale_counters {
-	XSCALE_CYCLE_COUNTER	= 0,
-	XSCALE_COUNTER0,
-	XSCALE_COUNTER1,
-	XSCALE_COUNTER2,
-	XSCALE_COUNTER3,
-};
-
-static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
-	PERF_MAP_ALL_UNSUPPORTED,
-	[PERF_COUNT_HW_CPU_CYCLES]		= XSCALE_PERFCTR_CCNT,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= XSCALE_PERFCTR_INSTRUCTION,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= XSCALE_PERFCTR_BRANCH,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= XSCALE_PERFCTR_BRANCH_MISS,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= XSCALE_PERFCTR_ICACHE_NO_DELIVER,
-};
-
-static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					   [PERF_COUNT_HW_CACHE_OP_MAX]
-					   [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	PERF_CACHE_MAP_ALL_UNSUPPORTED,
-
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= XSCALE_PERFCTR_DCACHE_ACCESS,
-	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= XSCALE_PERFCTR_DCACHE_MISS,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= XSCALE_PERFCTR_DCACHE_ACCESS,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= XSCALE_PERFCTR_DCACHE_MISS,
-
-	[C(L1I)][C(OP_READ)][C(RESULT_MISS)]	= XSCALE_PERFCTR_ICACHE_MISS,
-
-	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= XSCALE_PERFCTR_DTLB_MISS,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)]	= XSCALE_PERFCTR_DTLB_MISS,
-
-	[C(ITLB)][C(OP_READ)][C(RESULT_MISS)]	= XSCALE_PERFCTR_ITLB_MISS,
-	[C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)]	= XSCALE_PERFCTR_ITLB_MISS,
-};
-
-#define	XSCALE_PMU_ENABLE	0x001
-#define XSCALE_PMN_RESET	0x002
-#define	XSCALE_CCNT_RESET	0x004
-#define	XSCALE_PMU_RESET	(CCNT_RESET | PMN_RESET)
-#define XSCALE_PMU_CNT64	0x008
-
-#define XSCALE1_OVERFLOWED_MASK	0x700
-#define XSCALE1_CCOUNT_OVERFLOW	0x400
-#define XSCALE1_COUNT0_OVERFLOW	0x100
-#define XSCALE1_COUNT1_OVERFLOW	0x200
-#define XSCALE1_CCOUNT_INT_EN	0x040
-#define XSCALE1_COUNT0_INT_EN	0x010
-#define XSCALE1_COUNT1_INT_EN	0x020
-#define XSCALE1_COUNT0_EVT_SHFT	12
-#define XSCALE1_COUNT0_EVT_MASK	(0xff << XSCALE1_COUNT0_EVT_SHFT)
-#define XSCALE1_COUNT1_EVT_SHFT	20
-#define XSCALE1_COUNT1_EVT_MASK	(0xff << XSCALE1_COUNT1_EVT_SHFT)
-
-static inline u32
-xscale1pmu_read_pmnc(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
-	return val;
-}
-
-static inline void
-xscale1pmu_write_pmnc(u32 val)
-{
-	/* upper 4bits and 7, 11 are write-as-0 */
-	val &= 0xffff77f;
-	asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
-}
-
-static inline int
-xscale1_pmnc_counter_has_overflowed(unsigned long pmnc,
-					enum xscale_counters counter)
-{
-	int ret = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		ret = pmnc & XSCALE1_CCOUNT_OVERFLOW;
-		break;
-	case XSCALE_COUNTER0:
-		ret = pmnc & XSCALE1_COUNT0_OVERFLOW;
-		break;
-	case XSCALE_COUNTER1:
-		ret = pmnc & XSCALE1_COUNT1_OVERFLOW;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-	}
-
-	return ret;
-}
-
-static irqreturn_t
-xscale1pmu_handle_irq(struct arm_pmu *cpu_pmu)
-{
-	unsigned long pmnc;
-	struct perf_sample_data data;
-	struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events);
-	struct pt_regs *regs;
-	int idx;
-
-	/*
-	 * NOTE: there's an A stepping erratum that states if an overflow
-	 *       bit already exists and another occurs, the previous
-	 *       Overflow bit gets cleared. There's no workaround.
-	 *	 Fixed in B stepping or later.
-	 */
-	pmnc = xscale1pmu_read_pmnc();
-
-	/*
-	 * Write the value back to clear the overflow flags. Overflow
-	 * flags remain in pmnc for use below. We also disable the PMU
-	 * while we process the interrupt.
-	 */
-	xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
-
-	if (!(pmnc & XSCALE1_OVERFLOWED_MASK))
-		return IRQ_NONE;
-
-	regs = get_irq_regs();
-
-	for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		if (!event)
-			continue;
-
-		if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event);
-		perf_sample_data_init(&data, 0, hwc->last_period);
-		if (!armpmu_event_set_period(event))
-			continue;
-
-		if (perf_event_overflow(event, &data, regs))
-			cpu_pmu->disable(event);
-	}
-
-	irq_work_run();
-
-	/*
-	 * Re-enable the PMU.
-	 */
-	pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE;
-	xscale1pmu_write_pmnc(pmnc);
-
-	return IRQ_HANDLED;
-}
-
-static void xscale1pmu_enable_event(struct perf_event *event)
-{
-	unsigned long val, mask, evt, flags;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-	int idx = hwc->idx;
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		mask = 0;
-		evt = XSCALE1_CCOUNT_INT_EN;
-		break;
-	case XSCALE_COUNTER0:
-		mask = XSCALE1_COUNT0_EVT_MASK;
-		evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) |
-			XSCALE1_COUNT0_INT_EN;
-		break;
-	case XSCALE_COUNTER1:
-		mask = XSCALE1_COUNT1_EVT_MASK;
-		evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) |
-			XSCALE1_COUNT1_INT_EN;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val &= ~mask;
-	val |= evt;
-	xscale1pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void xscale1pmu_disable_event(struct perf_event *event)
-{
-	unsigned long val, mask, evt, flags;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-	int idx = hwc->idx;
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		mask = XSCALE1_CCOUNT_INT_EN;
-		evt = 0;
-		break;
-	case XSCALE_COUNTER0:
-		mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK;
-		evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER1:
-		mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK;
-		evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val &= ~mask;
-	val |= evt;
-	xscale1pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static int
-xscale1pmu_get_event_idx(struct pmu_hw_events *cpuc,
-				struct perf_event *event)
-{
-	struct hw_perf_event *hwc = &event->hw;
-	if (XSCALE_PERFCTR_CCNT == hwc->config_base) {
-		if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask))
-			return -EAGAIN;
-
-		return XSCALE_CYCLE_COUNTER;
-	} else {
-		if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask))
-			return XSCALE_COUNTER1;
-
-		if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask))
-			return XSCALE_COUNTER0;
-
-		return -EAGAIN;
-	}
-}
-
-static void xscalepmu_clear_event_idx(struct pmu_hw_events *cpuc,
-				     struct perf_event *event)
-{
-	clear_bit(event->hw.idx, cpuc->used_mask);
-}
-
-static void xscale1pmu_start(struct arm_pmu *cpu_pmu)
-{
-	unsigned long flags, val;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val |= XSCALE_PMU_ENABLE;
-	xscale1pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void xscale1pmu_stop(struct arm_pmu *cpu_pmu)
-{
-	unsigned long flags, val;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val &= ~XSCALE_PMU_ENABLE;
-	xscale1pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static inline u64 xscale1pmu_read_counter(struct perf_event *event)
-{
-	struct hw_perf_event *hwc = &event->hw;
-	int counter = hwc->idx;
-	u32 val = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
-		break;
-	}
-
-	return val;
-}
-
-static inline void xscale1pmu_write_counter(struct perf_event *event, u64 val)
-{
-	struct hw_perf_event *hwc = &event->hw;
-	int counter = hwc->idx;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
-		break;
-	}
-}
-
-static int xscale_map_event(struct perf_event *event)
-{
-	return armpmu_map_event(event, &xscale_perf_map,
-				&xscale_perf_cache_map, 0xFF);
-}
-
-static int xscale1pmu_init(struct arm_pmu *cpu_pmu)
-{
-	cpu_pmu->name		= "armv5_xscale1";
-	cpu_pmu->handle_irq	= xscale1pmu_handle_irq;
-	cpu_pmu->enable		= xscale1pmu_enable_event;
-	cpu_pmu->disable	= xscale1pmu_disable_event;
-	cpu_pmu->read_counter	= xscale1pmu_read_counter;
-	cpu_pmu->write_counter	= xscale1pmu_write_counter;
-	cpu_pmu->get_event_idx	= xscale1pmu_get_event_idx;
-	cpu_pmu->clear_event_idx = xscalepmu_clear_event_idx;
-	cpu_pmu->start		= xscale1pmu_start;
-	cpu_pmu->stop		= xscale1pmu_stop;
-	cpu_pmu->map_event	= xscale_map_event;
-	cpu_pmu->num_events	= 3;
-
-	return 0;
-}
-
-#define XSCALE2_OVERFLOWED_MASK	0x01f
-#define XSCALE2_CCOUNT_OVERFLOW	0x001
-#define XSCALE2_COUNT0_OVERFLOW	0x002
-#define XSCALE2_COUNT1_OVERFLOW	0x004
-#define XSCALE2_COUNT2_OVERFLOW	0x008
-#define XSCALE2_COUNT3_OVERFLOW	0x010
-#define XSCALE2_CCOUNT_INT_EN	0x001
-#define XSCALE2_COUNT0_INT_EN	0x002
-#define XSCALE2_COUNT1_INT_EN	0x004
-#define XSCALE2_COUNT2_INT_EN	0x008
-#define XSCALE2_COUNT3_INT_EN	0x010
-#define XSCALE2_COUNT0_EVT_SHFT	0
-#define XSCALE2_COUNT0_EVT_MASK	(0xff << XSCALE2_COUNT0_EVT_SHFT)
-#define XSCALE2_COUNT1_EVT_SHFT	8
-#define XSCALE2_COUNT1_EVT_MASK	(0xff << XSCALE2_COUNT1_EVT_SHFT)
-#define XSCALE2_COUNT2_EVT_SHFT	16
-#define XSCALE2_COUNT2_EVT_MASK	(0xff << XSCALE2_COUNT2_EVT_SHFT)
-#define XSCALE2_COUNT3_EVT_SHFT	24
-#define XSCALE2_COUNT3_EVT_MASK	(0xff << XSCALE2_COUNT3_EVT_SHFT)
-
-static inline u32
-xscale2pmu_read_pmnc(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
-	/* bits 1-2 and 4-23 are read-unpredictable */
-	return val & 0xff000009;
-}
-
-static inline void
-xscale2pmu_write_pmnc(u32 val)
-{
-	/* bits 4-23 are write-as-0, 24-31 are write ignored */
-	val &= 0xf;
-	asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
-}
-
-static inline u32
-xscale2pmu_read_overflow_flags(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void
-xscale2pmu_write_overflow_flags(u32 val)
-{
-	asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val));
-}
-
-static inline u32
-xscale2pmu_read_event_select(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void
-xscale2pmu_write_event_select(u32 val)
-{
-	asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val));
-}
-
-static inline u32
-xscale2pmu_read_int_enable(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val));
-	return val;
-}
-
-static void
-xscale2pmu_write_int_enable(u32 val)
-{
-	asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val));
-}
-
-static inline int
-xscale2_pmnc_counter_has_overflowed(unsigned long of_flags,
-					enum xscale_counters counter)
-{
-	int ret = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		ret = of_flags & XSCALE2_CCOUNT_OVERFLOW;
-		break;
-	case XSCALE_COUNTER0:
-		ret = of_flags & XSCALE2_COUNT0_OVERFLOW;
-		break;
-	case XSCALE_COUNTER1:
-		ret = of_flags & XSCALE2_COUNT1_OVERFLOW;
-		break;
-	case XSCALE_COUNTER2:
-		ret = of_flags & XSCALE2_COUNT2_OVERFLOW;
-		break;
-	case XSCALE_COUNTER3:
-		ret = of_flags & XSCALE2_COUNT3_OVERFLOW;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-	}
-
-	return ret;
-}
-
-static irqreturn_t
-xscale2pmu_handle_irq(struct arm_pmu *cpu_pmu)
-{
-	unsigned long pmnc, of_flags;
-	struct perf_sample_data data;
-	struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events);
-	struct pt_regs *regs;
-	int idx;
-
-	/* Disable the PMU. */
-	pmnc = xscale2pmu_read_pmnc();
-	xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
-
-	/* Check the overflow flag register. */
-	of_flags = xscale2pmu_read_overflow_flags();
-	if (!(of_flags & XSCALE2_OVERFLOWED_MASK))
-		return IRQ_NONE;
-
-	/* Clear the overflow bits. */
-	xscale2pmu_write_overflow_flags(of_flags);
-
-	regs = get_irq_regs();
-
-	for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		if (!event)
-			continue;
-
-		if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event);
-		perf_sample_data_init(&data, 0, hwc->last_period);
-		if (!armpmu_event_set_period(event))
-			continue;
-
-		if (perf_event_overflow(event, &data, regs))
-			cpu_pmu->disable(event);
-	}
-
-	irq_work_run();
-
-	/*
-	 * Re-enable the PMU.
-	 */
-	pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE;
-	xscale2pmu_write_pmnc(pmnc);
-
-	return IRQ_HANDLED;
-}
-
-static void xscale2pmu_enable_event(struct perf_event *event)
-{
-	unsigned long flags, ien, evtsel;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-	int idx = hwc->idx;
-
-	ien = xscale2pmu_read_int_enable();
-	evtsel = xscale2pmu_read_event_select();
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		ien |= XSCALE2_CCOUNT_INT_EN;
-		break;
-	case XSCALE_COUNTER0:
-		ien |= XSCALE2_COUNT0_INT_EN;
-		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER1:
-		ien |= XSCALE2_COUNT1_INT_EN;
-		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER2:
-		ien |= XSCALE2_COUNT2_INT_EN;
-		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER3:
-		ien |= XSCALE2_COUNT3_INT_EN;
-		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	xscale2pmu_write_event_select(evtsel);
-	xscale2pmu_write_int_enable(ien);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void xscale2pmu_disable_event(struct perf_event *event)
-{
-	unsigned long flags, ien, evtsel, of_flags;
-	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-	int idx = hwc->idx;
-
-	ien = xscale2pmu_read_int_enable();
-	evtsel = xscale2pmu_read_event_select();
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		ien &= ~XSCALE2_CCOUNT_INT_EN;
-		of_flags = XSCALE2_CCOUNT_OVERFLOW;
-		break;
-	case XSCALE_COUNTER0:
-		ien &= ~XSCALE2_COUNT0_INT_EN;
-		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
-		of_flags = XSCALE2_COUNT0_OVERFLOW;
-		break;
-	case XSCALE_COUNTER1:
-		ien &= ~XSCALE2_COUNT1_INT_EN;
-		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
-		of_flags = XSCALE2_COUNT1_OVERFLOW;
-		break;
-	case XSCALE_COUNTER2:
-		ien &= ~XSCALE2_COUNT2_INT_EN;
-		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
-		of_flags = XSCALE2_COUNT2_OVERFLOW;
-		break;
-	case XSCALE_COUNTER3:
-		ien &= ~XSCALE2_COUNT3_INT_EN;
-		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
-		of_flags = XSCALE2_COUNT3_OVERFLOW;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	xscale2pmu_write_event_select(evtsel);
-	xscale2pmu_write_int_enable(ien);
-	xscale2pmu_write_overflow_flags(of_flags);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static int
-xscale2pmu_get_event_idx(struct pmu_hw_events *cpuc,
-				struct perf_event *event)
-{
-	int idx = xscale1pmu_get_event_idx(cpuc, event);
-	if (idx >= 0)
-		goto out;
-
-	if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask))
-		idx = XSCALE_COUNTER3;
-	else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask))
-		idx = XSCALE_COUNTER2;
-out:
-	return idx;
-}
-
-static void xscale2pmu_start(struct arm_pmu *cpu_pmu)
-{
-	unsigned long flags, val;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
-	val |= XSCALE_PMU_ENABLE;
-	xscale2pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void xscale2pmu_stop(struct arm_pmu *cpu_pmu)
-{
-	unsigned long flags, val;
-	struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = xscale2pmu_read_pmnc();
-	val &= ~XSCALE_PMU_ENABLE;
-	xscale2pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static inline u64 xscale2pmu_read_counter(struct perf_event *event)
-{
-	struct hw_perf_event *hwc = &event->hw;
-	int counter = hwc->idx;
-	u32 val = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER2:
-		asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER3:
-		asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
-		break;
-	}
-
-	return val;
-}
-
-static inline void xscale2pmu_write_counter(struct perf_event *event, u64 val)
-{
-	struct hw_perf_event *hwc = &event->hw;
-	int counter = hwc->idx;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER2:
-		asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER3:
-		asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
-		break;
-	}
-}
-
-static int xscale2pmu_init(struct arm_pmu *cpu_pmu)
-{
-	cpu_pmu->name		= "armv5_xscale2";
-	cpu_pmu->handle_irq	= xscale2pmu_handle_irq;
-	cpu_pmu->enable		= xscale2pmu_enable_event;
-	cpu_pmu->disable	= xscale2pmu_disable_event;
-	cpu_pmu->read_counter	= xscale2pmu_read_counter;
-	cpu_pmu->write_counter	= xscale2pmu_write_counter;
-	cpu_pmu->get_event_idx	= xscale2pmu_get_event_idx;
-	cpu_pmu->clear_event_idx = xscalepmu_clear_event_idx;
-	cpu_pmu->start		= xscale2pmu_start;
-	cpu_pmu->stop		= xscale2pmu_stop;
-	cpu_pmu->map_event	= xscale_map_event;
-	cpu_pmu->num_events	= 5;
-
-	return 0;
-}
-
-static const struct pmu_probe_info xscale_pmu_probe_table[] = {
-	XSCALE_PMU_PROBE(ARM_CPU_XSCALE_ARCH_V1, xscale1pmu_init),
-	XSCALE_PMU_PROBE(ARM_CPU_XSCALE_ARCH_V2, xscale2pmu_init),
-	{ /* sentinel value */ }
-};
-
-static int xscale_pmu_device_probe(struct platform_device *pdev)
-{
-	return arm_pmu_device_probe(pdev, NULL, xscale_pmu_probe_table);
-}
-
-static struct platform_driver xscale_pmu_driver = {
-	.driver		= {
-		.name	= "xscale-pmu",
-	},
-	.probe		= xscale_pmu_device_probe,
-};
-
-builtin_platform_driver(xscale_pmu_driver);
-#endif	/* CONFIG_CPU_XSCALE */
diff --git a/arch/arm/kernel/pj4-cp0.c b/arch/arm/kernel/pj4-cp0.c
deleted file mode 100644
index 1d1fb22f44f3..000000000000
--- a/arch/arm/kernel/pj4-cp0.c
+++ /dev/null
@@ -1,134 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/kernel/pj4-cp0.c
- *
- * PJ4 iWMMXt coprocessor context switching and handling
- *
- * Copyright (c) 2010 Marvell International Inc.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/thread_notify.h>
-#include <asm/cputype.h>
-
-static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
-{
-	struct thread_info *thread = t;
-
-	switch (cmd) {
-	case THREAD_NOTIFY_FLUSH:
-		/*
-		 * flush_thread() zeroes thread->fpstate, so no need
-		 * to do anything here.
-		 *
-		 * FALLTHROUGH: Ensure we don't try to overwrite our newly
-		 * initialised state information on the first fault.
-		 */
-
-	case THREAD_NOTIFY_EXIT:
-		iwmmxt_task_release(thread);
-		break;
-
-	case THREAD_NOTIFY_SWITCH:
-		iwmmxt_task_switch(thread);
-		break;
-	}
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block __maybe_unused iwmmxt_notifier_block = {
-	.notifier_call	= iwmmxt_do,
-};
-
-
-static u32 __init pj4_cp_access_read(void)
-{
-	u32 value;
-
-	__asm__ __volatile__ (
-		"mrc	p15, 0, %0, c1, c0, 2\n\t"
-		: "=r" (value));
-	return value;
-}
-
-static void __init pj4_cp_access_write(u32 value)
-{
-	u32 temp;
-
-	__asm__ __volatile__ (
-		"mcr	p15, 0, %1, c1, c0, 2\n\t"
-#ifdef CONFIG_THUMB2_KERNEL
-		"isb\n\t"
-#else
-		"mrc	p15, 0, %0, c1, c0, 2\n\t"
-		"mov	%0, %0\n\t"
-		"sub	pc, pc, #4\n\t"
-#endif
-		: "=r" (temp) : "r" (value));
-}
-
-static int __init pj4_get_iwmmxt_version(void)
-{
-	u32 cp_access, wcid;
-
-	cp_access = pj4_cp_access_read();
-	pj4_cp_access_write(cp_access | 0xf);
-
-	/* check if coprocessor 0 and 1 are available */
-	if ((pj4_cp_access_read() & 0xf) != 0xf) {
-		pj4_cp_access_write(cp_access);
-		return -ENODEV;
-	}
-
-	/* read iWMMXt coprocessor id register p1, c0 */
-	__asm__ __volatile__ ("mrc    p1, 0, %0, c0, c0, 0\n" : "=r" (wcid));
-
-	pj4_cp_access_write(cp_access);
-
-	/* iWMMXt v1 */
-	if ((wcid & 0xffffff00) == 0x56051000)
-		return 1;
-	/* iWMMXt v2 */
-	if ((wcid & 0xffffff00) == 0x56052000)
-		return 2;
-
-	return -EINVAL;
-}
-
-/*
- * Disable CP0/CP1 on boot, and let call_fpe() and the iWMMXt lazy
- * switch code handle iWMMXt context switching.
- */
-static int __init pj4_cp0_init(void)
-{
-	u32 __maybe_unused cp_access;
-	int vers;
-
-	if (!cpu_is_pj4())
-		return 0;
-
-	vers = pj4_get_iwmmxt_version();
-	if (vers < 0)
-		return 0;
-
-#ifndef CONFIG_IWMMXT
-	pr_info("PJ4 iWMMXt coprocessor detected, but kernel support is missing.\n");
-#else
-	cp_access = pj4_cp_access_read() & ~0xf;
-	pj4_cp_access_write(cp_access);
-
-	pr_info("PJ4 iWMMXt v%d coprocessor enabled.\n", vers);
-	elf_hwcap |= HWCAP_IWMMXT;
-	thread_register_notifier(&iwmmxt_notifier_block);
-#endif
-
-	return 0;
-}
-
-late_initcall(pj4_cp0_init);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 3d9cace63884..d7aa95225c70 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -78,7 +78,6 @@ void arch_cpu_idle(void)
 		arm_pm_idle();
 	else
 		cpu_do_idle();
-	raw_local_irq_enable();
 }
 
 void arch_cpu_idle_prepare(void)
@@ -201,7 +200,7 @@ void __show_regs(struct pt_regs *regs)
 void show_regs(struct pt_regs * regs)
 {
 	__show_regs(regs);
-	dump_stack();
+	dump_backtrace(regs, NULL, KERN_DEFAULT);
 }
 
 ATOMIC_NOTIFIER_HEAD(thread_notify_head);
@@ -223,7 +222,6 @@ void flush_thread(void)
 
 	flush_ptrace_hw_breakpoint(tsk);
 
-	memset(thread->used_cp, 0, sizeof(thread->used_cp));
 	memset(&tsk->thread.debug, 0, sizeof(struct debug_info));
 	memset(&thread->fpstate, 0, sizeof(union fp_state));
 
@@ -232,15 +230,11 @@ void flush_thread(void)
 	thread_notify(THREAD_NOTIFY_FLUSH, thread);
 }
 
-void release_thread(struct task_struct *dead_task)
-{
-}
-
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long stack_start = args->stack;
 	unsigned long tls = args->tls;
 	struct thread_info *thread = task_thread_info(p);
@@ -320,7 +314,7 @@ static int __init gate_vma_init(void)
 	gate_vma.vm_page_prot = PAGE_READONLY_EXEC;
 	gate_vma.vm_start = 0xffff0000;
 	gate_vma.vm_end	= 0xffff0000 + PAGE_SIZE;
-	gate_vma.vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC;
+	vm_flags_init(&gate_vma, VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC);
 	return 0;
 }
 arch_initcall(gate_vma_init);
@@ -375,7 +369,7 @@ static unsigned long sigpage_addr(const struct mm_struct *mm,
 
 	slots = ((last - first) >> PAGE_SHIFT) + 1;
 
-	offset = get_random_int() % slots;
+	offset = get_random_u32_below(slots);
 
 	addr = first + (offset << PAGE_SHIFT);
 
diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c
index d4392e177484..3bb0c4dcfc5c 100644
--- a/arch/arm/kernel/psci_smp.c
+++ b/arch/arm/kernel/psci_smp.c
@@ -45,8 +45,15 @@ extern void secondary_startup(void);
 static int psci_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	if (psci_ops.cpu_on)
+#ifdef CONFIG_XIP_KERNEL
+		return psci_ops.cpu_on(cpu_logical_map(cpu),
+			((phys_addr_t)(&secondary_startup)
+			- XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+			+ CONFIG_XIP_PHYS_ADDR));
+#else
 		return psci_ops.cpu_on(cpu_logical_map(cpu),
 					virt_to_idmap(&secondary_startup));
+#endif
 	return -ENODEV;
 }
 
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index bfe88c6e60d5..7951b2c06fec 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -584,8 +584,6 @@ static int fpa_set(struct task_struct *target,
 {
 	struct thread_info *thread = task_thread_info(target);
 
-	thread->used_cp[1] = thread->used_cp[2] = 1;
-
 	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 		&thread->fpstate,
 		0, sizeof(struct user_fp));
@@ -651,11 +649,9 @@ static int vfp_set(struct task_struct *target,
 	if (ret)
 		return ret;
 
-	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
-				user_fpregs_offset + sizeof(new_vfp.fpregs),
-				user_fpscr_offset);
-	if (ret)
-		return ret;
+	user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+				  user_fpregs_offset + sizeof(new_vfp.fpregs),
+				  user_fpscr_offset);
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 &new_vfp.fpscr,
@@ -681,7 +677,7 @@ enum arm_regset {
 
 static const struct user_regset arm_regsets[] = {
 	[REGSET_GPR] = {
-		.core_note_type = NT_PRSTATUS,
+		USER_REGSET_NOTE_TYPE(PRSTATUS),
 		.n = ELF_NGREG,
 		.size = sizeof(u32),
 		.align = sizeof(u32),
@@ -693,7 +689,7 @@ static const struct user_regset arm_regsets[] = {
 		 * For the FPA regs in fpstate, the real fields are a mixture
 		 * of sizes, so pretend that the registers are word-sized:
 		 */
-		.core_note_type = NT_PRFPREG,
+		USER_REGSET_NOTE_TYPE(PRFPREG),
 		.n = sizeof(struct user_fp) / sizeof(u32),
 		.size = sizeof(u32),
 		.align = sizeof(u32),
@@ -706,7 +702,7 @@ static const struct user_regset arm_regsets[] = {
 		 * Pretend that the VFP regs are word-sized, since the FPSCR is
 		 * a single word dangling at the end of struct user_vfp:
 		 */
-		.core_note_type = NT_ARM_VFP,
+		USER_REGSET_NOTE_TYPE(ARM_VFP),
 		.n = ARM_VFPREGS_SIZE / sizeof(u32),
 		.size = sizeof(u32),
 		.align = sizeof(u32),
@@ -785,8 +781,9 @@ long arch_ptrace(struct task_struct *child, long request,
 			break;
 
 		case PTRACE_SET_SYSCALL:
-			task_thread_info(child)->abi_syscall = data &
-							__NR_SYSCALL_MASK;
+			if (data != -1)
+				data &= __NR_SYSCALL_MASK;
+			task_thread_info(child)->abi_syscall = data;
 			ret = 0;
 			break;
 
diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
index 8aac1e10b117..ac15db66df4c 100644
--- a/arch/arm/kernel/return_address.c
+++ b/arch/arm/kernel/return_address.c
@@ -16,17 +16,17 @@ struct return_address_data {
 	void *addr;
 };
 
-static int save_return_addr(struct stackframe *frame, void *d)
+static bool save_return_addr(void *d, unsigned long pc)
 {
 	struct return_address_data *data = d;
 
 	if (!data->level) {
-		data->addr = (void *)frame->pc;
+		data->addr = (void *)pc;
 
-		return 1;
+		return false;
 	} else {
 		--data->level;
-		return 0;
+		return true;
 	}
 }
 
@@ -47,6 +47,7 @@ here:
 	frame.kr_cur = NULL;
 	frame.tsk = current;
 #endif
+	frame.ex_frame = false;
 
 	walk_stackframe(&frame, save_return_addr, &data);
 
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 1e8a50a97edf..0bfd66c7ada0 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -15,10 +15,10 @@
 #include <linux/console.h>
 #include <linux/seq_file.h>
 #include <linux/screen_info.h>
-#include <linux/of_platform.h>
 #include <linux/init.h>
 #include <linux/kexec.h>
 #include <linux/libfdt.h>
+#include <linux/of.h>
 #include <linux/of_fdt.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
@@ -76,13 +76,6 @@ static int __init fpe_setup(char *line)
 __setup("fpe=", fpe_setup);
 #endif
 
-extern void init_default_cache_policy(unsigned long);
-extern void paging_init(const struct machine_desc *desc);
-extern void early_mm_init(const struct machine_desc *);
-extern void adjust_lowmem_bounds(void);
-extern enum reboot_mode reboot_mode;
-extern void setup_dma_zone(const struct machine_desc *desc);
-
 unsigned int processor_id;
 EXPORT_SYMBOL(processor_id);
 unsigned int __machine_arch_type __read_mostly;
@@ -450,6 +443,8 @@ static void __init cpuid_init_hwcaps(void)
 {
 	int block;
 	u32 isar5;
+	u32 isar6;
+	u32 pfr2;
 
 	if (cpu_architecture() < CPU_ARCH_ARMv7)
 		return;
@@ -485,6 +480,18 @@ static void __init cpuid_init_hwcaps(void)
 	block = cpuid_feature_extract_field(isar5, 16);
 	if (block >= 1)
 		elf_hwcap2 |= HWCAP2_CRC32;
+
+	/* Check for Speculation barrier instruction */
+	isar6 = read_cpuid_ext(CPUID_EXT_ISAR6);
+	block = cpuid_feature_extract_field(isar6, 12);
+	if (block >= 1)
+		elf_hwcap2 |= HWCAP2_SB;
+
+	/* Check for Speculative Store Bypassing control */
+	pfr2 = read_cpuid_ext(CPUID_EXT_PFR2);
+	block = cpuid_feature_extract_field(pfr2, 4);
+	if (block >= 1)
+		elf_hwcap2 |= HWCAP2_SSBS;
 }
 
 static void __init elf_hwcap_fixup(void)
@@ -873,10 +880,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc)
 		 */
 		boot_alias_start = phys_to_idmap(start);
 		if (arm_has_idmap_alias() && boot_alias_start != IDMAP_INVALID_ADDR) {
-			res = memblock_alloc(sizeof(*res), SMP_CACHE_BYTES);
-			if (!res)
-				panic("%s: Failed to allocate %zu bytes\n",
-				      __func__, sizeof(*res));
+			res = memblock_alloc_or_panic(sizeof(*res), SMP_CACHE_BYTES);
 			res->name = "System RAM (boot alias)";
 			res->start = boot_alias_start;
 			res->end = phys_to_idmap(res_end);
@@ -884,10 +888,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc)
 			request_resource(&iomem_resource, res);
 		}
 
-		res = memblock_alloc(sizeof(*res), SMP_CACHE_BYTES);
-		if (!res)
-			panic("%s: Failed to allocate %zu bytes\n", __func__,
-			      sizeof(*res));
+		res = memblock_alloc_or_panic(sizeof(*res), SMP_CACHE_BYTES);
 		res->name  = "System RAM";
 		res->start = start;
 		res->end = res_end;
@@ -921,9 +922,8 @@ static void __init request_standard_resources(const struct machine_desc *mdesc)
 		request_resource(&ioport_resource, &lp2);
 }
 
-#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) || \
-    defined(CONFIG_EFI)
-struct screen_info screen_info = {
+#if defined(CONFIG_VGA_CONSOLE)
+struct screen_info vgacon_screen_info = {
  .orig_video_lines	= 30,
  .orig_video_cols	= 80,
  .orig_video_mode	= 0,
@@ -973,7 +973,7 @@ static int __init init_machine_late(void)
 }
 late_initcall(init_machine_late);
 
-#ifdef CONFIG_KEXEC
+#ifdef CONFIG_CRASH_RESERVE
 /*
  * The crash region must be aligned to 128MB to avoid
  * zImage relocating below the reserved region.
@@ -1003,7 +1003,8 @@ static void __init reserve_crashkernel(void)
 
 	total_mem = get_total_mem();
 	ret = parse_crashkernel(boot_command_line, total_mem,
-				&crash_size, &crash_base);
+				&crash_size, &crash_base,
+				NULL, NULL, NULL);
 	/* invalid value specified or crashkernel=0 */
 	if (ret || !crash_size)
 		return;
@@ -1059,7 +1060,7 @@ static void __init reserve_crashkernel(void)
 }
 #else
 static inline void reserve_crashkernel(void) {}
-#endif /* CONFIG_KEXEC */
+#endif /* CONFIG_CRASH_RESERVE*/
 
 void __init hyp_mode_check(void)
 {
@@ -1128,7 +1129,7 @@ void __init setup_arch(char **cmdline_p)
 	setup_initial_init_mm(_text, _etext, _edata, _end);
 
 	/* populate cmd_line too for later use, preserving boot_command_line */
-	strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
+	strscpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = cmd_line;
 
 	early_fixmap_init();
@@ -1141,7 +1142,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	setup_dma_zone(mdesc);
 	xen_early_init();
-	efi_init();
+	arm_efi_init();
 	/*
 	 * Make sure the calculation for lowmem/highmem is set appropriately
 	 * before reserving/allocating any memory
@@ -1184,13 +1185,9 @@ void __init setup_arch(char **cmdline_p)
 
 	reserve_crashkernel();
 
-#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
-	handle_arch_irq = mdesc->handle_irq;
-#endif
-
 #ifdef CONFIG_VT
 #if defined(CONFIG_VGA_CONSOLE)
-	conswitchp = &vga_con;
+	vgacon_register_screen(&vgacon_screen_info);
 #endif
 #endif
 
@@ -1198,20 +1195,10 @@ void __init setup_arch(char **cmdline_p)
 		mdesc->init_early();
 }
 
-
-static int __init topology_init(void)
+bool arch_cpu_is_hotpluggable(int num)
 {
-	int cpu;
-
-	for_each_possible_cpu(cpu) {
-		struct cpuinfo_arm *cpuinfo = &per_cpu(cpu_data, cpu);
-		cpuinfo->cpu.hotpluggable = platform_can_hotplug_cpu(cpu);
-		register_cpu(&cpuinfo->cpu, cpu);
-	}
-
-	return 0;
+	return platform_can_hotplug_cpu(num);
 }
-subsys_initcall(topology_init);
 
 #ifdef CONFIG_HAVE_PROC_CPU
 static int __init proc_cpu_init(void)
@@ -1249,6 +1236,12 @@ static const char *hwcap_str[] = {
 	"vfpd32",
 	"lpae",
 	"evtstrm",
+	"fphp",
+	"asimdhp",
+	"asimddp",
+	"asimdfhm",
+	"asimdbf16",
+	"i8mm",
 	NULL
 };
 
@@ -1258,6 +1251,8 @@ static const char *hwcap2_str[] = {
 	"sha1",
 	"sha2",
 	"crc32",
+	"sb",
+	"ssbs",
 	NULL
 };
 
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index ea128e32e8ca..79a6730fa0eb 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -18,6 +18,7 @@
 #include <asm/traps.h>
 #include <asm/unistd.h>
 #include <asm/vfp.h>
+#include <asm/syscalls.h>
 
 #include "signal.h"
 
@@ -655,7 +656,7 @@ struct page *get_signal_page(void)
 		 PAGE_SIZE / sizeof(u32));
 
 	/* Give the signal return code some randomness */
-	offset = 0x200 + (get_random_int() & 0x7fc);
+	offset = 0x200 + (get_random_u16() & 0x7fc);
 	signal_return_offset = offset;
 
 	/* Copy signal return handlers into the page */
@@ -681,7 +682,7 @@ asmlinkage void do_rseq_syscall(struct pt_regs *regs)
  */
 static_assert(NSIGILL	== 11);
 static_assert(NSIGFPE	== 15);
-static_assert(NSIGSEGV	== 9);
+static_assert(NSIGSEGV	== 10);
 static_assert(NSIGBUS	== 5);
 static_assert(NSIGTRAP	== 6);
 static_assert(NSIGCHLD	== 6);
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index a86a1d4f3461..93afd1005b43 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -127,6 +127,10 @@ cpu_resume_after_mmu:
 	instr_sync
 #endif
 	bl	cpu_init		@ restore the und/abt/irq banked regs
+#if defined(CONFIG_KASAN) && defined(CONFIG_KASAN_STACK)
+	mov	r0, sp
+	bl	kasan_unpoison_task_stack_below
+#endif
 	mov	r0, #0			@ return zero on success
 	ldmfd	sp!, {r4 - r11, pc}
 ENDPROC(cpu_resume_after_mmu)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 978db2d96b44..50999886a8b5 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -48,7 +48,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mpu.h>
 
-#define CREATE_TRACE_POINTS
 #include <trace/events/ipi.h>
 
 /*
@@ -289,15 +288,11 @@ int __cpu_disable(void)
 }
 
 /*
- * called on the thread which is asking for a CPU to be shutdown -
- * waits until shutdown has completed, or it is timed out.
+ * called on the thread which is asking for a CPU to be shutdown after the
+ * shutdown completed.
  */
-void __cpu_die(unsigned int cpu)
+void arch_cpuhp_cleanup_dead_cpu(unsigned int cpu)
 {
-	if (!cpu_wait_death(cpu, 5)) {
-		pr_err("CPU%u: cpu didn't die\n", cpu);
-		return;
-	}
 	pr_debug("CPU%u: shutdown\n", cpu);
 
 	clear_tasks_mm_cpumask(cpu);
@@ -320,7 +315,7 @@ void __cpu_die(unsigned int cpu)
  * of the other hotplug-cpu capable cores, so presumably coming
  * out of idle fixes this.
  */
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	unsigned int cpu = smp_processor_id();
 
@@ -337,11 +332,11 @@ void arch_cpu_idle_dead(void)
 	flush_cache_louis();
 
 	/*
-	 * Tell __cpu_die() that this CPU is now safe to dispose of.  Once
-	 * this returns, power and/or clocks can be removed at any point
-	 * from this CPU and its cache by platform_cpu_kill().
+	 * Tell cpuhp_bp_sync_dead() that this CPU is now safe to dispose
+	 * of. Once this returns, power and/or clocks can be removed at
+	 * any point from this CPU and its cache by platform_cpu_kill().
 	 */
-	(void)cpu_report_death();
+	cpuhp_ap_report_dead();
 
 	/*
 	 * Ensure that the cache lines associated with that completion are
@@ -382,6 +377,8 @@ void arch_cpu_idle_dead(void)
 		: "r" (task_stack_page(current) + THREAD_SIZE - 8),
 		  "r" (current)
 		: "r0");
+
+	unreachable();
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
@@ -554,7 +551,8 @@ void show_ipi_list(struct seq_file *p, int prec)
 		if (!ipi_desc[i])
 			continue;
 
-		seq_printf(p, "%*s%u: ", prec - 1, "IPI", i);
+		seq_printf(p, "%*s%u:%s", prec - 1, "IPI", i,
+			   prec >= 4 ? " " : "");
 
 		for_each_online_cpu(cpu)
 			seq_printf(p, "%10u ", irq_desc_kstat_cpu(ipi_desc[i], cpu));
@@ -600,6 +598,8 @@ static DEFINE_RAW_SPINLOCK(stop_lock);
  */
 static void ipi_cpu_stop(unsigned int cpu)
 {
+	local_fiq_disable();
+
 	if (system_state <= SYSTEM_RUNNING) {
 		raw_spin_lock(&stop_lock);
 		pr_crit("CPU%u: stopping\n", cpu);
@@ -609,9 +609,6 @@ static void ipi_cpu_stop(unsigned int cpu)
 
 	set_cpu_online(cpu, false);
 
-	local_fiq_disable();
-	local_irq_disable();
-
 	while (1) {
 		cpu_relax();
 		wfe();
@@ -639,7 +636,7 @@ static void do_handle_IPI(int ipinr)
 	unsigned int cpu = smp_processor_id();
 
 	if ((unsigned)ipinr < NR_IPI)
-		trace_ipi_entry_rcuidle(ipi_types[ipinr]);
+		trace_ipi_entry(ipi_types[ipinr]);
 
 	switch (ipinr) {
 	case IPI_WAKEUP:
@@ -686,7 +683,7 @@ static void do_handle_IPI(int ipinr)
 	}
 
 	if ((unsigned)ipinr < NR_IPI)
-		trace_ipi_exit_rcuidle(ipi_types[ipinr]);
+		trace_ipi_exit(ipi_types[ipinr]);
 }
 
 /* Legacy version, should go away once all irqchips have been converted */
@@ -709,7 +706,7 @@ static irqreturn_t ipi_handler(int irq, void *data)
 
 static void smp_cross_call(const struct cpumask *target, unsigned int ipinr)
 {
-	trace_ipi_raise_rcuidle(target, ipi_types[ipinr]);
+	trace_ipi_raise(target, ipi_types[ipinr]);
 	__ipi_send_mask(ipi_desc[ipinr], target);
 }
 
@@ -748,7 +745,7 @@ void __init set_smp_ipi_range(int ipi_base, int n)
 	ipi_setup(smp_processor_id());
 }
 
-void smp_send_reschedule(int cpu)
+void arch_smp_send_reschedule(int cpu)
 {
 	smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
 }
@@ -778,7 +775,7 @@ void smp_send_stop(void)
  * kdump fails. So split out the panic_smp_self_stop() and add
  * set_cpu_online(smp_processor_id(), false).
  */
-void panic_smp_self_stop(void)
+void __noreturn panic_smp_self_stop(void)
 {
 	pr_debug("CPU %u will stop doing anything useful since another CPU has paniced\n",
 	         smp_processor_id());
@@ -850,7 +847,7 @@ static void raise_nmi(cpumask_t *mask)
 	__ipi_send_mask(ipi_desc[IPI_CPU_BACKTRACE], mask);
 }
 
-void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self)
+void arch_trigger_cpumask_backtrace(const cpumask_t *mask, int exclude_cpu)
 {
-	nmi_trigger_cpumask_backtrace(mask, exclude_self, raise_nmi);
+	nmi_trigger_cpumask_backtrace(mask, exclude_cpu, raise_nmi);
 }
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 9a14f721a2b0..42a3706e16a6 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -93,7 +93,6 @@ static void twd_timer_stop(void)
 {
 	struct clock_event_device *clk = raw_cpu_ptr(twd_evt);
 
-	twd_shutdown(clk);
 	disable_percpu_irq(clk->irq);
 }
 
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index d0fa2037460a..620aa82e3bdd 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -9,6 +9,8 @@
 #include <asm/stacktrace.h>
 #include <asm/traps.h>
 
+#include "reboot.h"
+
 #if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
 /*
  * Unwind the current stack frame and store the new register values in the
@@ -39,29 +41,74 @@
  * Note that with framepointer enabled, even the leaf functions have the same
  * prologue and epilogue, therefore we can ignore the LR value in this case.
  */
-int notrace unwind_frame(struct stackframe *frame)
+
+extern unsigned long call_with_stack_end;
+
+static int frame_pointer_check(struct stackframe *frame)
 {
 	unsigned long high, low;
 	unsigned long fp = frame->fp;
+	unsigned long pc = frame->pc;
+
+	/*
+	 * call_with_stack() is the only place we allow SP to jump from one
+	 * stack to another, with FP and SP pointing to different stacks,
+	 * skipping the FP boundary check at this point.
+	 */
+	if (pc >= (unsigned long)&call_with_stack &&
+			pc < (unsigned long)&call_with_stack_end)
+		return 0;
 
 	/* only go to a higher address on the stack */
 	low = frame->sp;
 	high = ALIGN(low, THREAD_SIZE);
 
-#ifdef CONFIG_CC_IS_CLANG
 	/* check current frame pointer is within bounds */
+#ifdef CONFIG_CC_IS_CLANG
 	if (fp < low + 4 || fp > high - 4)
 		return -EINVAL;
-
-	frame->sp = frame->fp;
-	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp));
-	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 4));
 #else
-	/* check current frame pointer is within bounds */
 	if (fp < low + 12 || fp > high - 4)
 		return -EINVAL;
+#endif
+
+	return 0;
+}
+
+int notrace unwind_frame(struct stackframe *frame)
+{
+	unsigned long fp = frame->fp;
+
+	if (frame_pointer_check(frame))
+		return -EINVAL;
+
+	/*
+	 * When we unwind through an exception stack, include the saved PC
+	 * value into the stack trace.
+	 */
+	if (frame->ex_frame) {
+		struct pt_regs *regs = (struct pt_regs *)frame->sp;
+
+		/*
+		 * We check that 'regs + sizeof(struct pt_regs)' (that is,
+		 * &regs[1]) does not exceed the bottom of the stack to avoid
+		 * accessing data outside the task's stack. This may happen
+		 * when frame->ex_frame is a false positive.
+		 */
+		if ((unsigned long)&regs[1] > ALIGN(frame->sp, THREAD_SIZE))
+			return -EINVAL;
+
+		frame->pc = regs->ARM_pc;
+		frame->ex_frame = false;
+		return 0;
+	}
 
 	/* restore the registers from the stack frame */
+#ifdef CONFIG_CC_IS_CLANG
+	frame->sp = frame->fp;
+	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp));
+	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 4));
+#else
 	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 12));
 	frame->sp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 8));
 	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 4));
@@ -72,17 +119,20 @@ int notrace unwind_frame(struct stackframe *frame)
 					(void *)frame->fp, &frame->kr_cur);
 #endif
 
+	if (in_entry_text(frame->pc))
+		frame->ex_frame = true;
+
 	return 0;
 }
 #endif
 
 void notrace walk_stackframe(struct stackframe *frame,
-		     int (*fn)(struct stackframe *, void *), void *data)
+		     bool (*fn)(void *, unsigned long), void *data)
 {
 	while (1) {
 		int ret;
 
-		if (fn(frame, data))
+		if (!fn(data, frame->pc))
 			break;
 		ret = unwind_frame(frame);
 		if (ret < 0)
@@ -92,55 +142,32 @@ void notrace walk_stackframe(struct stackframe *frame,
 EXPORT_SYMBOL(walk_stackframe);
 
 #ifdef CONFIG_STACKTRACE
-struct stack_trace_data {
-	struct stack_trace *trace;
-	unsigned int no_sched_functions;
-	unsigned int skip;
-};
-
-static int save_trace(struct stackframe *frame, void *d)
+static void start_stack_trace(struct stackframe *frame, struct task_struct *task,
+			      unsigned long fp, unsigned long sp,
+			      unsigned long lr, unsigned long pc)
 {
-	struct stack_trace_data *data = d;
-	struct stack_trace *trace = data->trace;
-	struct pt_regs *regs;
-	unsigned long addr = frame->pc;
-
-	if (data->no_sched_functions && in_sched_functions(addr))
-		return 0;
-	if (data->skip) {
-		data->skip--;
-		return 0;
-	}
-
-	trace->entries[trace->nr_entries++] = addr;
-
-	if (trace->nr_entries >= trace->max_entries)
-		return 1;
-
-	if (!in_entry_text(frame->pc))
-		return 0;
-
-	regs = (struct pt_regs *)frame->sp;
-	if ((unsigned long)&regs[1] > ALIGN(frame->sp, THREAD_SIZE))
-		return 0;
-
-	trace->entries[trace->nr_entries++] = regs->ARM_pc;
-
-	return trace->nr_entries >= trace->max_entries;
+	frame->fp = fp;
+	frame->sp = sp;
+	frame->lr = lr;
+	frame->pc = pc;
+#ifdef CONFIG_KRETPROBES
+	frame->kr_cur = NULL;
+	frame->tsk = task;
+#endif
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
+	frame->ex_frame = in_entry_text(frame->pc);
+#endif
 }
 
-/* This must be noinline to so that our skip calculation works correctly */
-static noinline void __save_stack_trace(struct task_struct *tsk,
-	struct stack_trace *trace, unsigned int nosched)
+void arch_stack_walk(stack_trace_consume_fn consume_entry, void *cookie,
+		     struct task_struct *task, struct pt_regs *regs)
 {
-	struct stack_trace_data data;
 	struct stackframe frame;
 
-	data.trace = trace;
-	data.skip = trace->skip;
-	data.no_sched_functions = nosched;
-
-	if (tsk != current) {
+	if (regs) {
+		start_stack_trace(&frame, NULL, regs->ARM_fp, regs->ARM_sp,
+				  regs->ARM_lr, regs->ARM_pc);
+	} else if (task != current) {
 #ifdef CONFIG_SMP
 		/*
 		 * What guarantees do we have here that 'tsk' is not
@@ -149,58 +176,22 @@ static noinline void __save_stack_trace(struct task_struct *tsk,
 		 */
 		return;
 #else
-		frame.fp = thread_saved_fp(tsk);
-		frame.sp = thread_saved_sp(tsk);
-		frame.lr = 0;		/* recovered from the stack */
-		frame.pc = thread_saved_pc(tsk);
+		start_stack_trace(&frame, task, thread_saved_fp(task),
+				  thread_saved_sp(task), 0,
+				  thread_saved_pc(task));
 #endif
 	} else {
-		/* We don't want this function nor the caller */
-		data.skip += 2;
-		frame.fp = (unsigned long)__builtin_frame_address(0);
-		frame.sp = current_stack_pointer;
-		frame.lr = (unsigned long)__builtin_return_address(0);
 here:
-		frame.pc = (unsigned long)&&here;
+		start_stack_trace(&frame, task,
+				  (unsigned long)__builtin_frame_address(0),
+				  current_stack_pointer,
+				  (unsigned long)__builtin_return_address(0),
+				  (unsigned long)&&here);
+		/* skip this function */
+		if (unwind_frame(&frame))
+			return;
 	}
-#ifdef CONFIG_KRETPROBES
-	frame.kr_cur = NULL;
-	frame.tsk = tsk;
-#endif
 
-	walk_stackframe(&frame, save_trace, &data);
-}
-
-void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace)
-{
-	struct stack_trace_data data;
-	struct stackframe frame;
-
-	data.trace = trace;
-	data.skip = trace->skip;
-	data.no_sched_functions = 0;
-
-	frame.fp = regs->ARM_fp;
-	frame.sp = regs->ARM_sp;
-	frame.lr = regs->ARM_lr;
-	frame.pc = regs->ARM_pc;
-#ifdef CONFIG_KRETPROBES
-	frame.kr_cur = NULL;
-	frame.tsk = current;
-#endif
-
-	walk_stackframe(&frame, save_trace, &data);
-}
-
-void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
-{
-	__save_stack_trace(tsk, trace, 1);
-}
-EXPORT_SYMBOL(save_stack_trace_tsk);
-
-void save_stack_trace(struct stack_trace *trace)
-{
-	__save_stack_trace(current, trace, 0);
+	walk_stackframe(&frame, consume_entry, cookie);
 }
-EXPORT_SYMBOL_GPL(save_stack_trace);
 #endif
diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c
index 43f0a3ebf390..58a6441b58c4 100644
--- a/arch/arm/kernel/suspend.c
+++ b/arch/arm/kernel/suspend.c
@@ -8,10 +8,11 @@
 #include <asm/bugs.h>
 #include <asm/cacheflush.h>
 #include <asm/idmap.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/smp_plat.h>
 #include <asm/suspend.h>
 #include <asm/tlbflush.h>
+#include <asm/uaccess.h>
 
 extern int __cpu_suspend(unsigned long, int (*)(unsigned long), u32 cpuid);
 extern void cpu_resume_mmu(void);
@@ -27,6 +28,13 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 		return -EINVAL;
 
 	/*
+	 * Needed for the MMU disabling/enabing code to be able to run from
+	 * TTBR0 addresses.
+	 */
+	if (IS_ENABLED(CONFIG_CPU_TTBR0_PAN))
+		uaccess_save_and_enable();
+
+	/*
 	 * Function graph tracer state gets incosistent when the kernel
 	 * calls functions that never return (aka suspend finishers) hence
 	 * disable graph tracing during their execution.
diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c
index b74bfcf94fb1..fdce83c95acb 100644
--- a/arch/arm/kernel/swp_emulate.c
+++ b/arch/arm/kernel/swp_emulate.c
@@ -34,6 +34,7 @@
  */
 #define __user_swpX_asm(data, addr, res, temp, B)		\
 	__asm__ __volatile__(					\
+	".arch armv7-a\n"					\
 	"0:	ldrex"B"	%2, [%3]\n"			\
 	"1:	strex"B"	%0, %1, [%3]\n"			\
 	"	cmp		%0, #0\n"			\
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index a5f183cfecb1..0141e9bb02e8 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -24,6 +24,7 @@
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
 #include <linux/slab.h>
+#include <asm/syscalls.h>
 
 /*
  * Since loff_t is a 64 bit type we avoid a lot of ABI hassle
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index 68112c172025..2944721e82a2 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -10,6 +10,8 @@
  *  Copyright:	MontaVista Software, Inc.
  */
 
+#include <asm/syscalls.h>
+
 /*
  * The legacy ABI and the new ARM EABI have different rules making some
  * syscalls incompatible especially with structure arguments.
@@ -73,6 +75,7 @@
 #include <linux/syscalls.h>
 #include <linux/errno.h>
 #include <linux/fs.h>
+#include <linux/filelock.h>
 #include <linux/cred.h>
 #include <linux/fcntl.h>
 #include <linux/eventpoll.h>
@@ -232,23 +235,23 @@ asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd,
 				 unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
-	struct fd f = fdget_raw(fd);
+	CLASS(fd_raw, f)(fd);
 	struct flock64 flock;
-	long err = -EBADF;
+	long err;
 
-	if (!f.file)
-		goto out;
+	if (fd_empty(f))
+		return -EBADF;
 
 	switch (cmd) {
 	case F_GETLK64:
 	case F_OFD_GETLK:
-		err = security_file_fcntl(f.file, cmd, arg);
+		err = security_file_fcntl(fd_file(f), cmd, arg);
 		if (err)
 			break;
 		err = get_oabi_flock(&flock, argp);
 		if (err)
 			break;
-		err = fcntl_getlk64(f.file, cmd, &flock);
+		err = fcntl_getlk64(fd_file(f), cmd, &flock);
 		if (!err)
 		       err = put_oabi_flock(&flock, argp);
 		break;
@@ -256,20 +259,18 @@ asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd,
 	case F_SETLKW64:
 	case F_OFD_SETLK:
 	case F_OFD_SETLKW:
-		err = security_file_fcntl(f.file, cmd, arg);
+		err = security_file_fcntl(fd_file(f), cmd, arg);
 		if (err)
 			break;
 		err = get_oabi_flock(&flock, argp);
 		if (err)
 			break;
-		err = fcntl_setlk64(fd, f.file, cmd, &flock);
+		err = fcntl_setlk64(fd, fd_file(f), cmd, &flock);
 		break;
 	default:
 		err = sys_fcntl64(fd, cmd, arg);
 		break;
 	}
-	fdput(f);
-out:
 	return err;
 }
 
diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c
index d3a85f01b328..f59927bcfbce 100644
--- a/arch/arm/kernel/tcm.c
+++ b/arch/arm/kernel/tcm.c
@@ -15,7 +15,7 @@
 #include <linux/string.h> /* memcpy */
 #include <asm/cputype.h>
 #include <asm/mach/map.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/system_info.h>
 #include <asm/traps.h>
 #include <asm/tcm.h>
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index ef0058de432b..2336ee2aa44a 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -42,7 +42,7 @@
  * can take this difference into account during load balance. A per cpu
  * structure is preferred because each CPU updates its own cpu_capacity field
  * during the load balance except for idle cores. One idle core is selected
- * to run the rebalance_domains for all idle cores and the cpu_capacity can be
+ * to run the sched_balance_domains for all idle cores and the cpu_capacity can be
  * updated during this sequence.
  */
 
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 9283dc65be31..afbd2ebe5c39 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -26,6 +26,7 @@
 #include <linux/sched/debug.h>
 #include <linux/sched/task_stack.h>
 #include <linux/irq.h>
+#include <linux/vmalloc.h>
 
 #include <linux/atomic.h>
 #include <asm/cacheflush.h>
@@ -178,19 +179,22 @@ static void dump_instr(const char *lvl, struct pt_regs *regs)
 	for (i = -4; i < 1 + !!thumb; i++) {
 		unsigned int val, bad;
 
-		if (!user_mode(regs)) {
-			if (thumb) {
-				u16 val16;
-				bad = get_kernel_nofault(val16, &((u16 *)addr)[i]);
-				val = val16;
-			} else {
-				bad = get_kernel_nofault(val, &((u32 *)addr)[i]);
-			}
+		if (thumb) {
+			u16 tmp;
+
+			if (user_mode(regs))
+				bad = get_user(tmp, &((u16 __user *)addr)[i]);
+			else
+				bad = get_kernel_nofault(tmp, &((u16 *)addr)[i]);
+
+			val = __mem_to_opcode_thumb16(tmp);
 		} else {
-			if (thumb)
-				bad = get_user(val, &((u16 *)addr)[i]);
+			if (user_mode(regs))
+				bad = get_user(val, &((u32 __user *)addr)[i]);
 			else
-				bad = get_user(val, &((u32 *)addr)[i]);
+				bad = get_kernel_nofault(val, &((u32 *)addr)[i]);
+
+			val = __mem_to_opcode_arm(val);
 		}
 
 		if (!bad)
@@ -205,19 +209,19 @@ static void dump_instr(const char *lvl, struct pt_regs *regs)
 }
 
 #ifdef CONFIG_ARM_UNWIND
-static inline void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
-				  const char *loglvl)
+void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+		    const char *loglvl)
 {
 	unwind_backtrace(regs, tsk, loglvl);
 }
 #else
-static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
-			   const char *loglvl)
+void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+		    const char *loglvl)
 {
 	unsigned int fp, mode;
 	int ok = 1;
 
-	printk("%sBacktrace: ", loglvl);
+	printk("%sCall trace: ", loglvl);
 
 	if (!tsk)
 		tsk = current;
@@ -254,13 +258,6 @@ void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
 	barrier();
 }
 
-#ifdef CONFIG_PREEMPT
-#define S_PREEMPT " PREEMPT"
-#elif defined(CONFIG_PREEMPT_RT)
-#define S_PREEMPT " PREEMPT_RT"
-#else
-#define S_PREEMPT ""
-#endif
 #ifdef CONFIG_SMP
 #define S_SMP " SMP"
 #else
@@ -278,8 +275,8 @@ static int __die(const char *str, int err, struct pt_regs *regs)
 	static int die_counter;
 	int ret;
 
-	pr_emerg("Internal error: %s: %x [#%d]" S_PREEMPT S_SMP S_ISA "\n",
-	         str, err, ++die_counter);
+	pr_emerg("Internal error: %s: %x [#%d]" S_SMP S_ISA "\n",
+		 str, err, ++die_counter);
 
 	/* trap and error numbers are mostly meaningless on ARM */
 	ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, SIGSEGV);
@@ -487,7 +484,7 @@ asmlinkage void do_undefinstr(struct pt_regs *regs)
 die_sig:
 #ifdef CONFIG_DEBUG_USER
 	if (user_debug & UDBG_UNDEFINED) {
-		pr_info("%s (%d): undefined instruction: pc=%p\n",
+		pr_info("%s (%d): undefined instruction: pc=%px\n",
 			current->comm, task_pid_nr(current), pc);
 		__show_regs(regs);
 		dump_instr(KERN_INFO, regs);
@@ -566,6 +563,7 @@ static int bad_syscall(int n, struct pt_regs *regs)
 static inline int
 __do_cache_op(unsigned long start, unsigned long end)
 {
+	unsigned int ua_flags;
 	int ret;
 
 	do {
@@ -574,7 +572,9 @@ __do_cache_op(unsigned long start, unsigned long end)
 		if (fatal_signal_pending(current))
 			return 0;
 
+		ua_flags = uaccess_save_and_enable();
 		ret = flush_icache_user_range(start, start + chunk);
+		uaccess_restore(ua_flags);
 		if (ret)
 			return ret;
 
@@ -753,6 +753,7 @@ void __readwrite_bug(const char *fn)
 }
 EXPORT_SYMBOL(__readwrite_bug);
 
+#ifdef CONFIG_MMU
 void __pte_error(const char *file, int line, pte_t pte)
 {
 	pr_err("%s:%d: bad pte %08llx.\n", file, line, (long long)pte_val(pte));
@@ -767,6 +768,7 @@ void __pgd_error(const char *file, int line, pgd_t pgd)
 {
 	pr_err("%s:%d: bad pgd %08llx.\n", file, line, (long long)pgd_val(pgd));
 }
+#endif
 
 asmlinkage void __div0(void)
 {
@@ -920,9 +922,9 @@ asmlinkage void handle_bad_stack(struct pt_regs *regs)
 {
 	unsigned long tsk_stk = (unsigned long)current->stack;
 #ifdef CONFIG_IRQSTACKS
-	unsigned long irq_stk = (unsigned long)this_cpu_read(irq_stack_ptr);
+	unsigned long irq_stk = (unsigned long)raw_cpu_read(irq_stack_ptr);
 #endif
-	unsigned long ovf_stk = (unsigned long)this_cpu_read(overflow_stack_ptr);
+	unsigned long ovf_stk = (unsigned long)raw_cpu_read(overflow_stack_ptr);
 
 	console_verbose();
 	pr_emerg("Insufficient stack space to handle exception!");
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index a37ea6c772cd..f60547dadc93 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -28,6 +28,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/list.h>
+#include <linux/module.h>
 
 #include <asm/stacktrace.h>
 #include <asm/traps.h>
@@ -307,6 +308,29 @@ static int unwind_exec_pop_subset_r0_to_r3(struct unwind_ctrl_block *ctrl,
 	return URC_OK;
 }
 
+static unsigned long unwind_decode_uleb128(struct unwind_ctrl_block *ctrl)
+{
+	unsigned long bytes = 0;
+	unsigned long insn;
+	unsigned long result = 0;
+
+	/*
+	 * unwind_get_byte() will advance `ctrl` one instruction at a time, so
+	 * loop until we get an instruction byte where bit 7 is not set.
+	 *
+	 * Note: This decodes a maximum of 4 bytes to output 28 bits data where
+	 * max is 0xfffffff: that will cover a vsp increment of 1073742336, hence
+	 * it is sufficient for unwinding the stack.
+	 */
+	do {
+		insn = unwind_get_byte(ctrl);
+		result |= (insn & 0x7f) << (bytes * 7);
+		bytes++;
+	} while (!!(insn & 0x80) && (bytes != sizeof(result)));
+
+	return result;
+}
+
 /*
  * Execute the current unwind instruction.
  */
@@ -360,7 +384,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 		if (ret)
 			goto error;
 	} else if (insn == 0xb2) {
-		unsigned long uleb128 = unwind_get_byte(ctrl);
+		unsigned long uleb128 = unwind_decode_uleb128(ctrl);
 
 		ctrl->vrs[SP] += 0x204 + (uleb128 << 2);
 	} else {
@@ -395,8 +419,18 @@ int unwind_frame(struct stackframe *frame)
 
 	idx = unwind_find_idx(frame->pc);
 	if (!idx) {
-		if (frame->pc && kernel_text_address(frame->pc))
+		if (frame->pc && kernel_text_address(frame->pc)) {
+			if (in_module_plt(frame->pc) && frame->pc != frame->lr) {
+				/*
+				 * Quoting Ard: Veneers only set PC using a
+				 * PC+immediate LDR, and so they don't affect
+				 * the state of the stack or the register file
+				 */
+				frame->pc = frame->lr;
+				return URC_OK;
+			}
 			pr_warn("unwind: Index not found %08lx\n", frame->pc);
+		}
 		return -URC_FAILURE;
 	}
 
@@ -490,6 +524,8 @@ void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk,
 {
 	struct stackframe frame;
 
+	printk("%sCall trace: ", loglvl);
+
 	pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
 
 	if (!tsk)
diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c
index 3408269d19c7..e38a30477f3d 100644
--- a/arch/arm/kernel/vdso.c
+++ b/arch/arm/kernel/vdso.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/cache.h>
+#include <linux/vdso_datastore.h>
 #include <linux/elf.h>
 #include <linux/err.h>
 #include <linux/kernel.h>
@@ -14,14 +15,12 @@
 #include <linux/of.h>
 #include <linux/printk.h>
 #include <linux/slab.h>
-#include <linux/timekeeper_internal.h>
 #include <linux/vmalloc.h>
 #include <asm/arch_timer.h>
 #include <asm/barrier.h>
 #include <asm/cacheflush.h>
 #include <asm/page.h>
 #include <asm/vdso.h>
-#include <asm/vdso_datapage.h>
 #include <clocksource/arm_arch_timer.h>
 #include <vdso/helpers.h>
 #include <vdso/vsyscall.h>
@@ -35,18 +34,6 @@ extern char vdso_start[], vdso_end[];
 /* Total number of pages needed for the data and text portions of the VDSO. */
 unsigned int vdso_total_pages __ro_after_init;
 
-/*
- * The VDSO data page.
- */
-static union vdso_data_store vdso_data_store __page_aligned_data;
-struct vdso_data *vdso_data = vdso_data_store.data;
-
-static struct page *vdso_data_page __ro_after_init;
-static const struct vm_special_mapping vdso_data_mapping = {
-	.name = "[vvar]",
-	.pages = &vdso_data_page,
-};
-
 static int vdso_mremap(const struct vm_special_mapping *sm,
 		struct vm_area_struct *new_vma)
 {
@@ -67,11 +54,9 @@ struct elfinfo {
 	char		*dynstr;	/* ptr to .dynstr section */
 };
 
-/* Cached result of boot-time check for whether the arch timer exists,
- * and if so, whether the virtual counter is useable.
+/* Boot-time check for whether the arch timer exists, and if so,
+ * whether the virtual counter is usable.
  */
-bool cntvct_ok __ro_after_init;
-
 static bool __init cntvct_functional(void)
 {
 	struct device_node *np;
@@ -135,7 +120,7 @@ static Elf32_Sym * __init find_symbol(struct elfinfo *lib, const char *symname)
 
 		if (lib->dynsym[i].st_name == 0)
 			continue;
-		strlcpy(name, lib->dynstr + lib->dynsym[i].st_name,
+		strscpy(name, lib->dynstr + lib->dynsym[i].st_name,
 			MAX_SYMNAME);
 		c = strchr(name, '@');
 		if (c)
@@ -172,7 +157,7 @@ static void __init patch_vdso(void *ehdr)
 	 * want programs to incur the slight additional overhead of
 	 * dispatching through the VDSO only to fall back to syscalls.
 	 */
-	if (!cntvct_ok) {
+	if (!cntvct_functional()) {
 		vdso_nullpatch_one(&einfo, "__vdso_gettimeofday");
 		vdso_nullpatch_one(&einfo, "__vdso_clock_gettime");
 		vdso_nullpatch_one(&einfo, "__vdso_clock_gettime64");
@@ -197,9 +182,6 @@ static int __init vdso_init(void)
 	if (vdso_text_pagelist == NULL)
 		return -ENOMEM;
 
-	/* Grab the VDSO data page. */
-	vdso_data_page = virt_to_page(vdso_data);
-
 	/* Grab the VDSO text pages. */
 	for (i = 0; i < text_pages; i++) {
 		struct page *page;
@@ -210,27 +192,16 @@ static int __init vdso_init(void)
 
 	vdso_text_mapping.pages = vdso_text_pagelist;
 
-	vdso_total_pages = 1; /* for the data/vvar page */
+	vdso_total_pages = VDSO_NR_PAGES; /* for the data/vvar pages */
 	vdso_total_pages += text_pages;
 
-	cntvct_ok = cntvct_functional();
-
 	patch_vdso(vdso_start);
 
 	return 0;
 }
 arch_initcall(vdso_init);
 
-static int install_vvar(struct mm_struct *mm, unsigned long addr)
-{
-	struct vm_area_struct *vma;
-
-	vma = _install_special_mapping(mm, addr, PAGE_SIZE,
-				       VM_READ | VM_MAYREAD,
-				       &vdso_data_mapping);
-
-	return PTR_ERR_OR_ZERO(vma);
-}
+static_assert(__VDSO_PAGES == VDSO_NR_PAGES);
 
 /* assumes mmap_lock is write-locked */
 void arm_install_vdso(struct mm_struct *mm, unsigned long addr)
@@ -243,12 +214,12 @@ void arm_install_vdso(struct mm_struct *mm, unsigned long addr)
 	if (vdso_text_pagelist == NULL)
 		return;
 
-	if (install_vvar(mm, addr))
+	if (IS_ERR(vdso_install_vvar_mapping(mm, addr)))
 		return;
 
-	/* Account for vvar page. */
-	addr += PAGE_SIZE;
-	len = (vdso_total_pages - 1) << PAGE_SHIFT;
+	/* Account for vvar pages. */
+	addr += VDSO_NR_PAGES * PAGE_SIZE;
+	len = (vdso_total_pages - VDSO_NR_PAGES) << PAGE_SHIFT;
 
 	vma = _install_special_mapping(mm, addr, len,
 		VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
diff --git a/arch/arm/kernel/vmcore_info.c b/arch/arm/kernel/vmcore_info.c
new file mode 100644
index 000000000000..1437aba47787
--- /dev/null
+++ b/arch/arm/kernel/vmcore_info.c
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/vmcore_info.h>
+
+void arch_crash_save_vmcoreinfo(void)
+{
+#ifdef CONFIG_ARM_LPAE
+	VMCOREINFO_CONFIG(ARM_LPAE);
+#endif
+}
diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S
index 76678732c60d..f2e8d4fac068 100644
--- a/arch/arm/kernel/vmlinux-xip.lds.S
+++ b/arch/arm/kernel/vmlinux-xip.lds.S
@@ -12,9 +12,8 @@
 #include <asm/vmlinux.lds.h>
 #include <asm/cache.h>
 #include <asm/thread_info.h>
-#include <asm/memory.h>
-#include <asm/mpu.h>
 #include <asm/page.h>
+#include <asm/mpu.h>
 
 OUTPUT_ARCH(arm)
 ENTRY(stext)
@@ -84,7 +83,7 @@ SECTIONS
 	}
 	.init.arch.info : {
 		__arch_info_begin = .;
-		*(.arch.info.init)
+		KEEP(*(.arch.info.init))
 		__arch_info_end = .;
 	}
 	.init.tagtable : {
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index aa12b65a7fd6..d592a203f9c6 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -12,9 +12,8 @@
 #include <asm/vmlinux.lds.h>
 #include <asm/cache.h>
 #include <asm/thread_info.h>
-#include <asm/memory.h>
-#include <asm/mpu.h>
 #include <asm/page.h>
+#include <asm/mpu.h>
 
 OUTPUT_ARCH(arm)
 ENTRY(stext)
@@ -100,7 +99,7 @@ SECTIONS
 	}
 	.init.arch.info : {
 		__arch_info_begin = .;
-		*(.arch.info.init)
+		KEEP(*(.arch.info.init))
 		__arch_info_end = .;
 	}
 	.init.tagtable : {
@@ -117,7 +116,7 @@ SECTIONS
 #endif
 	.init.pv_table : {
 		__pv_table_begin = .;
-		*(.pv_table)
+		KEEP(*(.pv_table))
 		__pv_table_end = .;
 	}
 
diff --git a/arch/arm/kernel/xscale-cp0.c b/arch/arm/kernel/xscale-cp0.c
index ed4f6e77616d..00d00d3aae97 100644
--- a/arch/arm/kernel/xscale-cp0.c
+++ b/arch/arm/kernel/xscale-cp0.c
@@ -166,6 +166,7 @@ static int __init xscale_cp0_init(void)
 		pr_info("XScale iWMMXt coprocessor detected.\n");
 		elf_hwcap |= HWCAP_IWMMXT;
 		thread_register_notifier(&iwmmxt_notifier_block);
+		register_iwmmxt_undef_handler();
 #endif
 	} else {
 		pr_info("XScale DSP coprocessor detected.\n");
diff --git a/arch/arm/lib/.gitignore b/arch/arm/lib/.gitignore
new file mode 100644
index 000000000000..647d7a922e68
--- /dev/null
+++ b/arch/arm/lib/.gitignore
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+# This now-removed directory used to contain generated files.
+/crypto/
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 6d2ba454f25b..0ca5aae1bcc3 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -36,15 +36,12 @@ else
   lib-y	+= io-readsw-armv4.o io-writesw-armv4.o
 endif
 
-ifeq ($(CONFIG_ARCH_RPC),y)
-  AFLAGS_delay-loop.o		+= -march=armv4
-endif
-
 $(obj)/csumpartialcopy.o:	$(obj)/csumpartialcopygeneric.S
 $(obj)/csumpartialcopyuser.o:	$(obj)/csumpartialcopygeneric.S
 
 ifeq ($(CONFIG_KERNEL_MODE_NEON),y)
-  NEON_FLAGS			:= -march=armv7-a -mfloat-abi=softfp -mfpu=neon
-  CFLAGS_xor-neon.o		+= $(NEON_FLAGS)
+  CFLAGS_xor-neon.o		+= $(CC_FLAGS_FPU)
   obj-$(CONFIG_XOR_BLOCKS)	+= xor-neon.o
 endif
+
+obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index 95bd35991288..f069d1b2318e 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -28,7 +28,7 @@ UNWIND(	.fnend		)
 ENDPROC(\name		)
 	.endm
 
-	.macro	testop, name, instr, store
+	.macro	__testop, name, instr, store, barrier
 ENTRY(	\name		)
 UNWIND(	.fnstart	)
 	ands	ip, r1, #3
@@ -38,7 +38,7 @@ UNWIND(	.fnstart	)
 	mov	r0, r0, lsr #5
 	add	r1, r1, r0, lsl #2	@ Get word offset
 	mov	r3, r2, lsl r3		@ create mask
-	smp_dmb
+	\barrier
 #if __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP)
 	.arch_extension	mp
 	ALT_SMP(W(pldw)	[r1])
@@ -50,13 +50,21 @@ UNWIND(	.fnstart	)
 	strex	ip, r2, [r1]
 	cmp	ip, #0
 	bne	1b
-	smp_dmb
+	\barrier
 	cmp	r0, #0
 	movne	r0, #1
 2:	bx	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
 	.endm
+
+	.macro	testop, name, instr, store
+	__testop \name, \instr, \store, smp_dmb
+	.endm
+
+	.macro	sync_testop, name, instr, store
+	__testop \name, \instr, \store, __smp_dmb
+	.endm
 #else
 	.macro	bitop, name, instr
 ENTRY(	\name		)
diff --git a/arch/arm/lib/call_with_stack.S b/arch/arm/lib/call_with_stack.S
index 0a268a6c513c..5030d4e8d126 100644
--- a/arch/arm/lib/call_with_stack.S
+++ b/arch/arm/lib/call_with_stack.S
@@ -46,4 +46,6 @@ UNWIND( .setfp	fpreg, sp	)
 	pop	{fpreg, pc}
 UNWIND( .fnend			)
 #endif
+	.globl call_with_stack_end
+call_with_stack_end:
 ENDPROC(call_with_stack)
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index 6928781e6bee..c289bde04743 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -13,7 +13,8 @@
 
 		.text
 
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+#if defined(CONFIG_CPU_SW_DOMAIN_PAN)
+
 		.macro	save_regs
 		mrc	p15, 0, ip, c3, c0, 0
 		stmfd	sp!, {r1, r2, r4 - r8, ip, lr}
@@ -25,7 +26,23 @@
 		mcr	p15, 0, ip, c3, c0, 0
 		ret	lr
 		.endm
+
+#elif defined(CONFIG_CPU_TTBR0_PAN)
+
+		.macro	save_regs
+		mrc	p15, 0, ip, c2, c0, 2		@ read TTBCR
+		stmfd	sp!, {r1, r2, r4 - r8, ip, lr}
+		uaccess_enable ip
+		.endm
+
+		.macro	load_regs
+		ldmfd	sp!, {r1, r2, r4 - r8, ip, lr}
+		mcr	p15, 0, ip, c2, c0, 2		@ restore TTBCR
+		ret	lr
+		.endm
+
 #else
+
 		.macro	save_regs
 		stmfd	sp!, {r1, r2, r4 - r8, lr}
 		.endm
@@ -33,6 +50,7 @@
 		.macro	load_regs
 		ldmfd	sp!, {r1, r2, r4 - r8, pc}
 		.endm
+
 #endif
 
 		.macro	load1b,	reg1
diff --git a/arch/arm/lib/delay-loop.S b/arch/arm/lib/delay-loop.S
index 3ccade0f8130..33b08ca1c242 100644
--- a/arch/arm/lib/delay-loop.S
+++ b/arch/arm/lib/delay-loop.S
@@ -5,9 +5,14 @@
  *  Copyright (C) 1995, 1996 Russell King
  */
 #include <linux/linkage.h>
+#include <linux/cfi_types.h>
 #include <asm/assembler.h>
 #include <asm/delay.h>
 
+#ifdef CONFIG_ARCH_RPC
+		.arch	armv4
+#endif
+
 		.text
 
 .LC0:		.word	loops_per_jiffy
@@ -20,21 +25,26 @@
  * HZ  <= 1000
  */
 
-ENTRY(__loop_udelay)
+SYM_TYPED_FUNC_START(__loop_udelay)
 		ldr	r2, .LC1
 		mul	r0, r2, r0		@ r0 = delay_us * UDELAY_MULT
-ENTRY(__loop_const_udelay)			@ 0 <= r0 <= 0xfffffaf0
+		b	__loop_const_udelay
+SYM_FUNC_END(__loop_udelay)
+
+SYM_TYPED_FUNC_START(__loop_const_udelay)	@ 0 <= r0 <= 0xfffffaf0
 		ldr	r2, .LC0
 		ldr	r2, [r2]
 		umull	r1, r0, r2, r0		@ r0-r1 = r0 * loops_per_jiffy
 		adds	r1, r1, #0xffffffff	@ rounding up ...
 		adcs	r0, r0, r0		@ and right shift by 31
 		reteq	lr
+		b	__loop_delay
+SYM_FUNC_END(__loop_const_udelay)
 
 		.align 3
 
 @ Delay routine
-ENTRY(__loop_delay)
+SYM_TYPED_FUNC_START(__loop_delay)
 		subs	r0, r0, #1
 #if 0
 		retls	lr
@@ -54,6 +64,4 @@ ENTRY(__loop_delay)
 #endif
 		bhi	__loop_delay
 		ret	lr
-ENDPROC(__loop_udelay)
-ENDPROC(__loop_const_udelay)
-ENDPROC(__loop_delay)
+SYM_FUNC_END(__loop_delay)
diff --git a/arch/arm/lib/error-inject.c b/arch/arm/lib/error-inject.c
new file mode 100644
index 000000000000..5a5b405792ba
--- /dev/null
+++ b/arch/arm/lib/error-inject.c
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/error-injection.h>
+#include <linux/kprobes.h>
+
+void override_function_with_return(struct pt_regs *regs)
+{
+	instruction_pointer_set(regs, regs->ARM_lr);
+}
+NOKPROBE_SYMBOL(override_function_with_return);
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index 7fd3600db8ef..b7ac2d3c0748 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -12,182 +12,128 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/unwind.h>
                 .text
 
-/*
- * Purpose  : Find a 'zero' bit
- * Prototype: int find_first_zero_bit(void *addr, unsigned int maxbit);
- */
-ENTRY(_find_first_zero_bit_le)
-		teq	r1, #0	
-		beq	3f
-		mov	r2, #0
-1:
- ARM(		ldrb	r3, [r0, r2, lsr #3]	)
- THUMB(		lsr	r3, r2, #3		)
- THUMB(		ldrb	r3, [r0, r3]		)
-		eors	r3, r3, #0xff		@ invert bits
-		bne	.L_found		@ any now set - found zero bit
-		add	r2, r2, #8		@ next bit pointer
-2:		cmp	r2, r1			@ any more?
-		blo	1b
-3:		mov	r0, r1			@ no free bits
-		ret	lr
-ENDPROC(_find_first_zero_bit_le)
-
-/*
- * Purpose  : Find next 'zero' bit
- * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
- */
-ENTRY(_find_next_zero_bit_le)
-		cmp	r2, r1
-		bhs	3b
-		ands	ip, r2, #7
-		beq	1b			@ If new byte, goto old routine
- ARM(		ldrb	r3, [r0, r2, lsr #3]	)
- THUMB(		lsr	r3, r2, #3		)
- THUMB(		ldrb	r3, [r0, r3]		)
-		eor	r3, r3, #0xff		@ now looking for a 1 bit
-		movs	r3, r3, lsr ip		@ shift off unused bits
-		bne	.L_found
-		orr	r2, r2, #7		@ if zero, then no bits here
-		add	r2, r2, #1		@ align bit pointer
-		b	2b			@ loop for next bit
-ENDPROC(_find_next_zero_bit_le)
+#ifdef __ARMEB__
+#define SWAB_ENDIAN le
+#else
+#define SWAB_ENDIAN be
+#endif
 
-/*
- * Purpose  : Find a 'one' bit
- * Prototype: int find_first_bit(const unsigned long *addr, unsigned int maxbit);
- */
-ENTRY(_find_first_bit_le)
-		teq	r1, #0	
+		.macro	find_first, endian, set, name
+ENTRY(_find_first_\name\()bit_\endian)
+	UNWIND(	.fnstart)
+		teq	r1, #0
 		beq	3f
 		mov	r2, #0
-1:
- ARM(		ldrb	r3, [r0, r2, lsr #3]	)
- THUMB(		lsr	r3, r2, #3		)
- THUMB(		ldrb	r3, [r0, r3]		)
-		movs	r3, r3
-		bne	.L_found		@ any now set - found zero bit
-		add	r2, r2, #8		@ next bit pointer
+1:		ldr	r3, [r0], #4
+		.ifeq \set
+		mvns	r3, r3			@ invert/test bits
+		.else
+		movs	r3, r3			@ test bits
+		.endif
+		.ifc \endian, SWAB_ENDIAN
+		bne	.L_found_swab
+		.else
+		bne	.L_found		@ found the bit?
+		.endif
+		add	r2, r2, #32		@ next index
 2:		cmp	r2, r1			@ any more?
 		blo	1b
-3:		mov	r0, r1			@ no free bits
+3:		mov	r0, r1			@ no more bits
 		ret	lr
-ENDPROC(_find_first_bit_le)
+	UNWIND(	.fnend)
+ENDPROC(_find_first_\name\()bit_\endian)
+		.endm
 
-/*
- * Purpose  : Find next 'one' bit
- * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
- */
-ENTRY(_find_next_bit_le)
+		.macro	find_next, endian, set, name
+ENTRY(_find_next_\name\()bit_\endian)
+	UNWIND(	.fnstart)
 		cmp	r2, r1
 		bhs	3b
-		ands	ip, r2, #7
-		beq	1b			@ If new byte, goto old routine
- ARM(		ldrb	r3, [r0, r2, lsr #3]	)
- THUMB(		lsr	r3, r2, #3		)
- THUMB(		ldrb	r3, [r0, r3]		)
+		mov	ip, r2, lsr #5		@ word index
+		add	r0, r0, ip, lsl #2
+		ands	ip, r2, #31		@ bit position
+		beq	1b
+		ldr	r3, [r0], #4
+		.ifeq \set
+		mvn	r3, r3			@ invert bits
+		.endif
+		.ifc \endian, SWAB_ENDIAN
+		rev_l	r3, ip
+		.if	.Lrev_l_uses_tmp
+		@ we need to recompute ip because rev_l will have overwritten
+		@ it.
+		and	ip, r2, #31		@ bit position
+		.endif
+		.endif
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
-		orr	r2, r2, #7		@ if zero, then no bits here
+		orr	r2, r2, #31		@ no zero bits
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(_find_next_bit_le)
+	UNWIND(	.fnend)
+ENDPROC(_find_next_\name\()bit_\endian)
+		.endm
 
-#ifdef __ARMEB__
+		.macro	find_bit, endian, set, name
+		find_first \endian, \set, \name
+		find_next  \endian, \set, \name
+		.endm
 
-ENTRY(_find_first_zero_bit_be)
-		teq	r1, #0
-		beq	3f
-		mov	r2, #0
-1:		eor	r3, r2, #0x18		@ big endian byte ordering
- ARM(		ldrb	r3, [r0, r3, lsr #3]	)
- THUMB(		lsr	r3, #3			)
- THUMB(		ldrb	r3, [r0, r3]		)
-		eors	r3, r3, #0xff		@ invert bits
-		bne	.L_found		@ any now set - found zero bit
-		add	r2, r2, #8		@ next bit pointer
-2:		cmp	r2, r1			@ any more?
-		blo	1b
-3:		mov	r0, r1			@ no free bits
-		ret	lr
-ENDPROC(_find_first_zero_bit_be)
+/* _find_first_zero_bit_le and _find_next_zero_bit_le */
+		find_bit le, 0, zero_
 
-ENTRY(_find_next_zero_bit_be)
-		cmp	r2, r1
-		bhs	3b
-		ands	ip, r2, #7
-		beq	1b			@ If new byte, goto old routine
-		eor	r3, r2, #0x18		@ big endian byte ordering
- ARM(		ldrb	r3, [r0, r3, lsr #3]	)
- THUMB(		lsr	r3, #3			)
- THUMB(		ldrb	r3, [r0, r3]		)
-		eor	r3, r3, #0xff		@ now looking for a 1 bit
-		movs	r3, r3, lsr ip		@ shift off unused bits
-		bne	.L_found
-		orr	r2, r2, #7		@ if zero, then no bits here
-		add	r2, r2, #1		@ align bit pointer
-		b	2b			@ loop for next bit
-ENDPROC(_find_next_zero_bit_be)
+/* _find_first_bit_le and _find_next_bit_le */
+		find_bit le, 1
 
-ENTRY(_find_first_bit_be)
-		teq	r1, #0
-		beq	3f
-		mov	r2, #0
-1:		eor	r3, r2, #0x18		@ big endian byte ordering
- ARM(		ldrb	r3, [r0, r3, lsr #3]	)
- THUMB(		lsr	r3, #3			)
- THUMB(		ldrb	r3, [r0, r3]		)
-		movs	r3, r3
-		bne	.L_found		@ any now set - found zero bit
-		add	r2, r2, #8		@ next bit pointer
-2:		cmp	r2, r1			@ any more?
-		blo	1b
-3:		mov	r0, r1			@ no free bits
-		ret	lr
-ENDPROC(_find_first_bit_be)
+#ifdef __ARMEB__
 
-ENTRY(_find_next_bit_be)
-		cmp	r2, r1
-		bhs	3b
-		ands	ip, r2, #7
-		beq	1b			@ If new byte, goto old routine
-		eor	r3, r2, #0x18		@ big endian byte ordering
- ARM(		ldrb	r3, [r0, r3, lsr #3]	)
- THUMB(		lsr	r3, #3			)
- THUMB(		ldrb	r3, [r0, r3]		)
-		movs	r3, r3, lsr ip		@ shift off unused bits
-		bne	.L_found
-		orr	r2, r2, #7		@ if zero, then no bits here
-		add	r2, r2, #1		@ align bit pointer
-		b	2b			@ loop for next bit
-ENDPROC(_find_next_bit_be)
+/* _find_first_zero_bit_be and _find_next_zero_bit_be */
+		find_bit be, 0, zero_
+
+/* _find_first_bit_be and _find_next_bit_be */
+		find_bit be, 1
 
 #endif
 
 /*
  * One or more bits in the LSB of r3 are assumed to be set.
  */
+.L_found_swab:
+	UNWIND(	.fnstart)
+		rev_l	r3, ip
 .L_found:
-#if __LINUX_ARM_ARCH__ >= 5
+#if __LINUX_ARM_ARCH__ >= 7
+		rbit	r3, r3			@ reverse bits
+		clz	r3, r3			@ count high zero bits
+		add	r0, r2, r3		@ add offset of first set bit
+#elif __LINUX_ARM_ARCH__ >= 5
 		rsb	r0, r3, #0
-		and	r3, r3, r0
-		clz	r3, r3
-		rsb	r3, r3, #31
-		add	r0, r2, r3
+		and	r3, r3, r0		@ mask out lowest bit set
+		clz	r3, r3			@ count high zero bits
+		rsb	r3, r3, #31		@ offset of first set bit
+		add	r0, r2, r3		@ add offset of first set bit
 #else
-		tst	r3, #0x0f
+		mov	ip, #~0
+		tst	r3, ip, lsr #16		@ test bits 0-15
+		addeq	r2, r2, #16
+		moveq	r3, r3, lsr #16
+		tst	r3, #0x00ff
+		addeq	r2, r2, #8
+		moveq	r3, r3, lsr #8
+		tst	r3, #0x000f
 		addeq	r2, r2, #4
-		movne	r3, r3, lsl #4
-		tst	r3, #0x30
+		moveq	r3, r3, lsr #4
+		tst	r3, #0x0003
 		addeq	r2, r2, #2
-		movne	r3, r3, lsl #2
-		tst	r3, #0x40
+		moveq	r3, r3, lsr #2
+		tst	r3, #0x0001
 		addeq	r2, r2, #1
 		mov	r0, r2
 #endif
 		cmp	r1, r0			@ Clamp to maxbit
 		movlo	r0, r1
 		ret	lr
-
+	UNWIND(	.fnend)
diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S
index d71ab61430b2..de75ae4d5ab4 100644
--- a/arch/arm/lib/memset.S
+++ b/arch/arm/lib/memset.S
@@ -17,6 +17,7 @@ ENTRY(__memset)
 ENTRY(mmioset)
 WEAK(memset)
 UNWIND( .fnstart         )
+	and	r1, r1, #255		@ cast to unsigned char
 	ands	r3, r0, #3		@ 1 unaligned?
 	mov	ip, r0			@ preserve r0 as return value
 	bne	6f			@ 1
diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S
index 4ebecc67e6e0..f13fe9bc2399 100644
--- a/arch/arm/lib/testchangebit.S
+++ b/arch/arm/lib/testchangebit.S
@@ -10,3 +10,7 @@
                 .text
 
 testop	_test_and_change_bit, eor, str
+
+#if __LINUX_ARM_ARCH__ >= 6
+sync_testop	_sync_test_and_change_bit, eor, str
+#endif
diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S
index 009afa0f5b4a..4d2c5ca620eb 100644
--- a/arch/arm/lib/testclearbit.S
+++ b/arch/arm/lib/testclearbit.S
@@ -10,3 +10,7 @@
                 .text
 
 testop	_test_and_clear_bit, bicne, strne
+
+#if __LINUX_ARM_ARCH__ >= 6
+sync_testop	_sync_test_and_clear_bit, bicne, strne
+#endif
diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S
index f3192e55acc8..649dbab65d8d 100644
--- a/arch/arm/lib/testsetbit.S
+++ b/arch/arm/lib/testsetbit.S
@@ -10,3 +10,7 @@
                 .text
 
 testop	_test_and_set_bit, orreq, streq
+
+#if __LINUX_ARM_ARCH__ >= 6
+sync_testop	_sync_test_and_set_bit, orreq, streq
+#endif
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
index 14eecaaf295f..c0ac7796d775 100644
--- a/arch/arm/lib/uaccess_with_memcpy.c
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -56,10 +56,10 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
 	 * to see that it's still huge and whether or not we will
 	 * need to fault on write.
 	 */
-	if (unlikely(pmd_thp_or_huge(*pmd))) {
+	if (unlikely(pmd_leaf(*pmd))) {
 		ptl = &current->mm->page_table_lock;
 		spin_lock(ptl);
-		if (unlikely(!pmd_thp_or_huge(*pmd)
+		if (unlikely(!pmd_leaf(*pmd)
 			|| pmd_hugewillfault(*pmd))) {
 			spin_unlock(ptl);
 			return 0;
@@ -74,6 +74,9 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
 		return 0;
 
 	pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl);
+	if (unlikely(!pte))
+		return 0;
+
 	if (unlikely(!pte_present(*pte) || !pte_young(*pte) ||
 	    !pte_write(*pte) || !pte_dirty(*pte))) {
 		pte_unmap_unlock(pte, ptl);
@@ -116,7 +119,7 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
 			tocopy = n;
 
 		ua_flags = uaccess_save_and_enable();
-		memcpy((void *)to, from, tocopy);
+		__memcpy((void *)to, from, tocopy);
 		uaccess_restore(ua_flags);
 		to += tocopy;
 		from += tocopy;
@@ -178,7 +181,7 @@ __clear_user_memset(void __user *addr, unsigned long n)
 			tocopy = n;
 
 		ua_flags = uaccess_save_and_enable();
-		memset((void *)addr, 0, tocopy);
+		__memset((void *)addr, 0, tocopy);
 		uaccess_restore(ua_flags);
 		addr += tocopy;
 		n -= tocopy;
diff --git a/arch/arm/lib/xor-neon.c b/arch/arm/lib/xor-neon.c
index 522510baed49..cf57fca97908 100644
--- a/arch/arm/lib/xor-neon.c
+++ b/arch/arm/lib/xor-neon.c
@@ -8,6 +8,7 @@
 #include <linux/raid/xor.h>
 #include <linux/module.h>
 
+MODULE_DESCRIPTION("NEON accelerated XOR implementation");
 MODULE_LICENSE("GPL");
 
 #ifndef __ARM_NEON__
diff --git a/arch/arm/mach-actions/platsmp.c b/arch/arm/mach-actions/platsmp.c
index f26618b43514..7b208e96fbb6 100644
--- a/arch/arm/mach-actions/platsmp.c
+++ b/arch/arm/mach-actions/platsmp.c
@@ -20,6 +20,8 @@
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 
+#include <trace/events/ipi.h>
+
 #define OWL_CPU1_ADDR	0x50
 #define OWL_CPU1_FLAG	0x5c
 
diff --git a/arch/arm/mach-airoha/Makefile b/arch/arm/mach-airoha/Makefile
deleted file mode 100644
index a5857d0d02eb..000000000000
--- a/arch/arm/mach-airoha/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y			+= airoha.o
diff --git a/arch/arm/mach-airoha/airoha.c b/arch/arm/mach-airoha/airoha.c
deleted file mode 100644
index ea23b5abb478..000000000000
--- a/arch/arm/mach-airoha/airoha.c
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Device Tree support for Airoha SoCs
- *
- * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
- */
-#include <asm/mach/arch.h>
-
-static const char * const airoha_board_dt_compat[] = {
-	"airoha,en7523",
-	NULL,
-};
-
-DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
-	.dt_compat	= airoha_board_dt_compat,
-MACHINE_END
diff --git a/arch/arm/mach-alpine/alpine_cpu_pm.c b/arch/arm/mach-alpine/alpine_cpu_pm.c
index 13ae8412e9ce..b48da6f12b6c 100644
--- a/arch/arm/mach-alpine/alpine_cpu_pm.c
+++ b/arch/arm/mach-alpine/alpine_cpu_pm.c
@@ -29,7 +29,7 @@ int alpine_cpu_wakeup(unsigned int phys_cpu, uint32_t phys_resume_addr)
 	/*
 	 * Set CPU resume address -
 	 * secure firmware running on boot will jump to this address
-	 * after setting proper CPU mode, and initialiing e.g. secure
+	 * after setting proper CPU mode, and initializing e.g. secure
 	 * regs (the same mode all CPUs are booted to - usually HYP)
 	 */
 	writel(phys_resume_addr,
diff --git a/arch/arm/mach-alpine/alpine_machine.c b/arch/arm/mach-alpine/alpine_machine.c
index d256a99e9b99..bc491bbbabf8 100644
--- a/arch/arm/mach-alpine/alpine_machine.c
+++ b/arch/arm/mach-alpine/alpine_machine.c
@@ -5,8 +5,6 @@
  * Copyright (C) 2015 Annapurna Labs Ltd.
  */
 
-#include <linux/of_platform.h>
-
 #include <asm/mach/arch.h>
 
 static const char * const al_match[] __initconst = {
diff --git a/arch/arm/mach-asm9260/Kconfig b/arch/arm/mach-asm9260/Kconfig
deleted file mode 100644
index 74e0f61c74c8..000000000000
--- a/arch/arm/mach-asm9260/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config MACH_ASM9260
-	bool "Alphascale ASM9260"
-	depends on ARCH_MULTI_V5
-	depends on CPU_LITTLE_ENDIAN
-	select CPU_ARM926T
-	select ASM9260_TIMER
-	help
-	  Support for Alphascale ASM9260 based platform.
diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
index cd8a15be0724..fcf287edd0e5 100644
--- a/arch/arm/mach-aspeed/Kconfig
+++ b/arch/arm/mach-aspeed/Kconfig
@@ -2,7 +2,6 @@
 menuconfig ARCH_ASPEED
 	bool "Aspeed BMC architectures"
 	depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V6 || ARCH_MULTI_V7
-	select SRAM
 	select WATCHDOG
 	select ASPEED_WATCHDOG
 	select MFD_SYSCON
@@ -19,9 +18,9 @@ config MACH_ASPEED_G4
 	select PINCTRL_ASPEED_G4
 	select FTTMR010_TIMER
 	help
-	 Say yes if you intend to run on an Aspeed ast2400 or similar
-	 fourth generation BMCs, such as those used by OpenPower Power8
-	 systems.
+	  Say yes if you intend to run on an Aspeed ast2400 or similar
+	  fourth generation BMCs, such as those used by OpenPower Power8
+	  systems.
 
 config MACH_ASPEED_G5
 	bool "Aspeed SoC 5th Generation"
@@ -29,8 +28,8 @@ config MACH_ASPEED_G5
 	select PINCTRL_ASPEED_G5
 	select FTTMR010_TIMER
 	help
-	 Say yes if you intend to run on an Aspeed ast2500 or similar
-	 fifth generation Aspeed BMCs.
+	  Say yes if you intend to run on an Aspeed ast2500 or similar
+	  fifth generation Aspeed BMCs.
 
 config MACH_ASPEED_G6
 	bool "Aspeed SoC 6th Generation"
@@ -40,7 +39,7 @@ config MACH_ASPEED_G6
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER
 	help
-	 Say yes if you intend to run on an Aspeed ast2600 or similar
-	 sixth generation Aspeed BMCs.
+	  Say yes if you intend to run on an Aspeed ast2600 or similar
+	  sixth generation Aspeed BMCs.
 
 endif
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 3dd9e718661b..c5ef27e3cd8f 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,4 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
+config ARCH_MICROCHIP
+	bool
+
 menuconfig ARCH_AT91
 	bool "AT91/Microchip SoCs"
 	depends on (CPU_LITTLE_ENDIAN && (ARCH_MULTI_V4T || ARCH_MULTI_V5)) || \
@@ -8,6 +11,7 @@ menuconfig ARCH_AT91
 	select GPIOLIB
 	select PINCTRL
 	select SOC_BUS
+	select ARCH_MICROCHIP
 
 if ARCH_AT91
 config SOC_SAMV7
@@ -58,6 +62,17 @@ config SOC_SAMA5D4
 	help
 	  Select this if you are using one of Microchip's SAMA5D4 family SoC.
 
+config SOC_SAMA7D65
+	bool "SAMA7D65 family"
+	depends on ARCH_MULTI_V7
+	select HAVE_AT91_GENERATED_CLK
+	select HAVE_AT91_SAM9X60_PLL
+	select HAVE_AT91_USB_CLK
+	select HAVE_AT91_UTMI
+	select SOC_SAMA7
+	help
+	  Select this if you are using one of Microchip's SAMA7D65 family SoC.
+
 config SOC_SAMA7G5
 	bool "SAMA7G5 family"
 	depends on ARCH_MULTI_V7
@@ -97,7 +112,6 @@ config SOC_AT91SAM9
 	depends on ARCH_MULTI_V5
 	select ATMEL_AIC_IRQ
 	select ATMEL_PM if PM
-	select ATMEL_SDRAMC
 	select CPU_ARM926T
 	select HAVE_AT91_SMD
 	select HAVE_AT91_USB_CLK
@@ -131,7 +145,6 @@ config SOC_SAM9X60
 	depends on ARCH_MULTI_V5
 	select ATMEL_AIC5_IRQ
 	select ATMEL_PM if PM
-	select ATMEL_SDRAMC
 	select CPU_ARM926T
 	select HAVE_AT91_USB_CLK
 	select HAVE_AT91_GENERATED_CLK
@@ -143,11 +156,27 @@ config SOC_SAM9X60
 	help
 	  Select this if you are using Microchip's SAM9X60 SoC
 
+config SOC_SAM9X7
+	bool "SAM9X7"
+	depends on ARCH_MULTI_V5
+	select ATMEL_AIC5_IRQ
+	select ATMEL_PM if PM
+	select CPU_ARM926T
+	select HAVE_AT91_USB_CLK
+	select HAVE_AT91_GENERATED_CLK
+	select HAVE_AT91_SAM9X60_PLL
+	select MEMORY
+	select PINCTRL_AT91
+	select SOC_SAM_V4_V5
+	select SRAM if PM
+	help
+	  Select this if you are using Microchip's SAM9X7 SoC
+
 comment "Clocksource driver selection"
 
 config ATMEL_CLOCKSOURCE_PIT
 	bool "Periodic Interval Timer (PIT) support"
-	depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
+	depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5
 	default SOC_AT91SAM9 || SOC_SAMA5
 	select ATMEL_PIT
 	help
@@ -157,7 +186,7 @@ config ATMEL_CLOCKSOURCE_PIT
 
 config ATMEL_CLOCKSOURCE_TCB
 	bool "Timer Counter Blocks (TCB) support"
-	default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
+	default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5
 	select ATMEL_TCB_CLKSRC
 	help
 	  Select this to get a high precision clocksource based on a
@@ -168,7 +197,7 @@ config ATMEL_CLOCKSOURCE_TCB
 
 config MICROCHIP_CLOCKSOURCE_PIT64B
 	bool "64-bit Periodic Interval Timer (PIT64B) support"
-	default SOC_SAM9X60 || SOC_SAMA7
+	default SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA7
 	select MICROCHIP_PIT64B
 	help
 	  Select this to get a high resolution clockevent (SAM9X60) or
@@ -213,7 +242,6 @@ config SOC_SAMA5
 	bool
 	select ATMEL_AIC5_IRQ
 	select ATMEL_PM if PM
-	select ATMEL_SDRAMC
 	select MEMORY
 	select SOC_SAM_V7
 	select SRAM if PM
@@ -234,7 +262,6 @@ config SOC_SAMA7
 	bool
 	select ARM_GIC
 	select ATMEL_PM if PM
-	select ATMEL_SDRAMC
 	select MEMORY
 	select SOC_SAM_V7
 	select SRAM if PM
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 0dcc37180588..7d8a7bc44e65 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -7,6 +7,7 @@
 obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o
 obj-$(CONFIG_SOC_AT91SAM9)	+= at91sam9.o
 obj-$(CONFIG_SOC_SAM9X60)	+= sam9x60.o
+obj-$(CONFIG_SOC_SAM9X7)	+= sam9x7.o
 obj-$(CONFIG_SOC_SAMA5)		+= sama5.o sam_secure.o
 obj-$(CONFIG_SOC_SAMA7)		+= sama7.o
 obj-$(CONFIG_SOC_SAMV7)		+= samv7.o
@@ -14,9 +15,6 @@ obj-$(CONFIG_SOC_SAMV7)		+= samv7.o
 # Power Management
 obj-$(CONFIG_ATMEL_PM)		+= pm.o pm_suspend.o
 
-ifeq ($(CONFIG_CPU_V7),y)
-AFLAGS_pm_suspend.o := -march=armv7-a
-endif
 ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG
 endif
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
deleted file mode 100644
index 5dde7328a7a9..000000000000
--- a/arch/arm/mach-at91/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Empty file waiting for deletion once Makefile.boot isn't needed any more.
-# Patch waits for application at
-# https://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 0c3960a8b3eb..acf0b3c82a30 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -12,6 +12,7 @@
 extern void __init at91rm9200_pm_init(void);
 extern void __init at91sam9_pm_init(void);
 extern void __init sam9x60_pm_init(void);
+extern void __init sam9x7_pm_init(void);
 extern void __init sama5_pm_init(void);
 extern void __init sama5d2_pm_init(void);
 extern void __init sama7_pm_init(void);
@@ -19,6 +20,7 @@ extern void __init sama7_pm_init(void);
 static inline void __init at91rm9200_pm_init(void) { }
 static inline void __init at91sam9_pm_init(void) { }
 static inline void __init sam9x60_pm_init(void) { }
+static inline void __init sam9x7_pm_init(void) { }
 static inline void __init sama5_pm_init(void) { }
 static inline void __init sama5d2_pm_init(void) { }
 static inline void __init sama7_pm_init(void) { }
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index df6d673e83d5..35058b99069c 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -12,6 +12,7 @@
 #include <linux/of.h>
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
+#include <linux/platform_device.h>
 #include <linux/parser.h>
 #include <linux/suspend.h>
 
@@ -19,8 +20,6 @@
 #include <linux/clk/at91_pmc.h>
 #include <linux/platform_data/atmel.h>
 
-#include <soc/at91/pm.h>
-
 #include <asm/cacheflush.h>
 #include <asm/fncpy.h>
 #include <asm/system_misc.h>
@@ -223,17 +222,27 @@ static const struct of_device_id sam9x60_ws_ids[] = {
 	{ /* sentinel */ }
 };
 
-static const struct of_device_id sama7g5_ws_ids[] = {
+static const struct of_device_id sama7_ws_ids[] = {
+	{ .compatible = "microchip,sama7d65-rtc",	.data = &ws_info[1] },
 	{ .compatible = "microchip,sama7g5-rtc",	.data = &ws_info[1] },
 	{ .compatible = "microchip,sama7g5-ohci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
 	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
+	{ .compatible = "microchip,sama7d65-sdhci",	.data = &ws_info[3] },
 	{ .compatible = "microchip,sama7g5-sdhci",	.data = &ws_info[3] },
+	{ .compatible = "microchip,sama7d65-rtt",	.data = &ws_info[4] },
 	{ .compatible = "microchip,sama7g5-rtt",	.data = &ws_info[4] },
 	{ /* sentinel */ }
 };
 
+static const struct of_device_id sam9x7_ws_ids[] = {
+	{ .compatible = "microchip,sam9x7-rtc",		.data = &ws_info[1] },
+	{ .compatible = "microchip,sam9x7-rtt",		.data = &ws_info[4] },
+	{ .compatible = "microchip,sam9x7-gem",		.data = &ws_info[5] },
+	{ /* sentinel */ }
+};
+
 static int at91_pm_config_ws(unsigned int pm_mode, bool set)
 {
 	const struct wakeup_source_info *wsi;
@@ -336,16 +345,14 @@ static bool at91_pm_eth_quirk_is_valid(struct at91_pm_quirk_eth *eth)
 		pdev = of_find_device_by_node(eth->np);
 		if (!pdev)
 			return false;
+		/* put_device(eth->dev) is called at the end of suspend. */
 		eth->dev = &pdev->dev;
 	}
 
 	/* No quirks if device isn't a wakeup source. */
-	if (!device_may_wakeup(eth->dev)) {
-		put_device(eth->dev);
+	if (!device_may_wakeup(eth->dev))
 		return false;
-	}
 
-	/* put_device(eth->dev) is called at the end of suspend. */
 	return true;
 }
 
@@ -441,14 +448,14 @@ clk_unconfigure:
 				pr_err("AT91: PM: failed to enable %s clocks\n",
 				       j == AT91_PM_G_ETH ? "geth" : "eth");
 			}
-		} else {
-			/*
-			 * Release the reference to eth->dev taken in
-			 * at91_pm_eth_quirk_is_valid().
-			 */
-			put_device(eth->dev);
-			eth->dev = NULL;
 		}
+
+		/*
+		 * Release the reference to eth->dev taken in
+		 * at91_pm_eth_quirk_is_valid().
+		 */
+		put_device(eth->dev);
+		eth->dev = NULL;
 	}
 
 	return ret;
@@ -541,10 +548,43 @@ extern u32 at91_pm_suspend_in_sram_sz;
 
 static int at91_suspend_finish(unsigned long val)
 {
+	/* SYNOPSYS workaround to fix a bug in the calibration logic */
+	unsigned char modified_fix_code[] = {
+		0x00, 0x01, 0x01, 0x06, 0x07, 0x0c, 0x06, 0x07, 0x0b, 0x18,
+		0x0a, 0x0b, 0x0c, 0x0d, 0x0d, 0x0a, 0x13, 0x13, 0x12, 0x13,
+		0x14, 0x15, 0x15, 0x12, 0x18, 0x19, 0x19, 0x1e, 0x1f, 0x14,
+		0x1e, 0x1f,
+	};
+	unsigned int tmp, index;
 	int i;
 
 	if (soc_pm.data.mode == AT91_PM_BACKUP && soc_pm.data.ramc_phy) {
 		/*
+		 * Bootloader will perform DDR recalibration and will try to
+		 * restore the ZQ0SR0 with the value saved here. But the
+		 * calibration is buggy and restoring some values from ZQ0SR0
+		 * is forbidden and risky thus we need to provide processed
+		 * values for these.
+		 */
+		tmp = readl(soc_pm.data.ramc_phy + DDR3PHY_ZQ0SR0);
+
+		/* Store pull-down output impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SR0_PDO_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] = modified_fix_code[index] << DDR3PHY_ZQ0SR0_PDO_OFF;
+
+		/* Store pull-up output impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SR0_PUO_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SR0_PUO_OFF;
+
+		/* Store pull-down on-die termination impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SR0_PDODT_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SR0_PDODT_OFF;
+
+		/* Store pull-up on-die termination impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SRO_PUODT_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SRO_PUODT_OFF;
+
+		/*
 		 * The 1st 8 words of memory might get corrupted in the process
 		 * of DDR PHY recalibration; it is saved here in securam and it
 		 * will be restored later, after recalibration, by bootloader
@@ -562,7 +602,21 @@ static int at91_suspend_finish(unsigned long val)
 	return 0;
 }
 
-static void at91_pm_switch_ba_to_vbat(void)
+/**
+ * at91_pm_switch_ba_to_auto() - Configure Backup Unit Power Switch
+ * to automatic/hardware mode.
+ *
+ * The Backup Unit Power Switch can be managed either by software or hardware.
+ * Enabling hardware mode allows the automatic transition of power between
+ * VDDANA (or VDDIN33) and VDDBU (or VBAT, respectively), based on the
+ * availability of these power sources.
+ *
+ * If the Backup Unit Power Switch is already in automatic mode, no action is
+ * required. If it is in software-controlled mode, it is switched to automatic
+ * mode to enhance safety and eliminate the need for toggling between power
+ * sources.
+ */
+static void at91_pm_switch_ba_to_auto(void)
 {
 	unsigned int offset = offsetof(struct at91_pm_sfrbu_regs, pswbu);
 	unsigned int val;
@@ -573,24 +627,19 @@ static void at91_pm_switch_ba_to_vbat(void)
 
 	val = readl(soc_pm.data.sfrbu + offset);
 
-	/* Already on VBAT. */
-	if (!(val & soc_pm.sfrbu_regs.pswbu.state))
+	/* Already on auto/hardware. */
+	if (!(val & soc_pm.sfrbu_regs.pswbu.ctrl))
 		return;
 
-	val &= ~soc_pm.sfrbu_regs.pswbu.softsw;
-	val |= soc_pm.sfrbu_regs.pswbu.key | soc_pm.sfrbu_regs.pswbu.ctrl;
+	val &= ~soc_pm.sfrbu_regs.pswbu.ctrl;
+	val |= soc_pm.sfrbu_regs.pswbu.key;
 	writel(val, soc_pm.data.sfrbu + offset);
-
-	/* Wait for update. */
-	val = readl(soc_pm.data.sfrbu + offset);
-	while (val & soc_pm.sfrbu_regs.pswbu.state)
-		val = readl(soc_pm.data.sfrbu + offset);
 }
 
 static void at91_pm_suspend(suspend_state_t state)
 {
 	if (soc_pm.data.mode == AT91_PM_BACKUP) {
-		at91_pm_switch_ba_to_vbat();
+		at91_pm_switch_ba_to_auto();
 
 		cpu_suspend(0, at91_suspend_finish);
 
@@ -598,6 +647,11 @@ static void at91_pm_suspend(suspend_state_t state)
 		at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
 					     &at91_pm_suspend_in_sram,
 					     at91_pm_suspend_in_sram_sz);
+
+		if (IS_ENABLED(CONFIG_SOC_SAMA7D65)) {
+			/* SHDWC.SR */
+			readl(soc_pm.data.shdwc + 0x08);
+		}
 	} else {
 		at91_suspend_finish(0);
 	}
@@ -624,16 +678,6 @@ static int at91_pm_enter(suspend_state_t state)
 	if (ret)
 		return ret;
 
-#ifdef CONFIG_PINCTRL_AT91
-	/*
-	 * FIXME: this is needed to communicate between the pinctrl driver and
-	 * the PM implementation in the machine. Possibly part of the PM
-	 * implementation should be moved down into the pinctrl driver and get
-	 * called as part of the generic suspend/resume path.
-	 */
-	at91_pinctrl_gpio_suspend();
-#endif
-
 	switch (state) {
 	case PM_SUSPEND_MEM:
 	case PM_SUSPEND_STANDBY:
@@ -658,9 +702,6 @@ static int at91_pm_enter(suspend_state_t state)
 	}
 
 error:
-#ifdef CONFIG_PINCTRL_AT91
-	at91_pinctrl_gpio_resume();
-#endif
 	at91_pm_config_quirks(false);
 	return 0;
 }
@@ -1029,7 +1070,8 @@ static int __init at91_pm_backup_init(void)
 	int ret = -ENODEV, located = 0;
 
 	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2) &&
-	    !IS_ENABLED(CONFIG_SOC_SAMA7G5))
+	    !IS_ENABLED(CONFIG_SOC_SAMA7G5) &&
+	    !IS_ENABLED(CONFIG_SOC_SAMA7D65))
 		return -EPERM;
 
 	if (!at91_is_pm_mode_active(AT91_PM_BACKUP))
@@ -1066,10 +1108,6 @@ static int __init at91_pm_backup_init(void)
 		of_scan_flat_dt(at91_pm_backup_scan_memcs, &located);
 		if (!located)
 			goto securam_fail;
-
-		/* DDR3PHY_ZQ0SR0 */
-		soc_pm.bu->ddr_phy_calibration[0] = readl(soc_pm.data.ramc_phy +
-							  0x188);
 	}
 
 	return 0;
@@ -1091,6 +1129,7 @@ static void __init at91_pm_secure_init(void)
 	if (res.a0 == 0) {
 		pr_info("AT91: Secure PM: suspend mode set to %s\n",
 			pm_modes[suspend_mode].pattern);
+		soc_pm.data.mode = suspend_mode;
 		return;
 	}
 
@@ -1100,6 +1139,7 @@ static void __init at91_pm_secure_init(void)
 	res = sam_smccc_call(SAMA5_SMC_SIP_GET_SUSPEND_MODE, 0, 0);
 	if (res.a0 == 0) {
 		pr_warn("AT91: Secure PM: failed to get default mode\n");
+		soc_pm.data.mode = -1;
 		return;
 	}
 
@@ -1107,6 +1147,7 @@ static void __init at91_pm_secure_init(void)
 		pm_modes[suspend_mode].pattern);
 
 	soc_pm.data.suspend_mode = res.a1;
+	soc_pm.data.mode = soc_pm.data.suspend_mode;
 }
 static const struct of_device_id atmel_shdwc_ids[] = {
 	{ .compatible = "atmel,sama5d2-shdwc" },
@@ -1298,6 +1339,7 @@ struct pmc_info {
 	unsigned long uhp_udp_mask;
 	unsigned long mckr;
 	unsigned long version;
+	unsigned long mcks;
 };
 
 static const struct pmc_info pmc_infos[] __initconst = {
@@ -1322,15 +1364,21 @@ static const struct pmc_info pmc_infos[] __initconst = {
 		.version = AT91_PMC_V1,
 	},
 	{
-		.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP,
 		.mckr = 0x28,
 		.version = AT91_PMC_V2,
 	},
 	{
 		.mckr = 0x28,
 		.version = AT91_PMC_V2,
+		.mcks = 4,
+	},
+	{
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP,
+		.mckr = 0x28,
+		.version = AT91_PMC_V2,
+		.mcks = 9,
 	},
-
 };
 
 static const struct of_device_id atmel_pmc_ids[] __initconst = {
@@ -1346,6 +1394,8 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
 	{ .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
+	{ .compatible = "microchip,sam9x7-pmc", .data = &pmc_infos[4] },
+	{ .compatible = "microchip,sama7d65-pmc", .data = &pmc_infos[6] },
 	{ .compatible = "microchip,sama7g5-pmc", .data = &pmc_infos[5] },
 	{ /* sentinel */ },
 };
@@ -1416,6 +1466,7 @@ static void __init at91_pm_init(void (*pm_idle)(void))
 	soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask;
 	soc_pm.data.pmc_mckr_offset = pmc->mckr;
 	soc_pm.data.pmc_version = pmc->version;
+	soc_pm.data.pmc_mcks = pmc->mcks;
 
 	if (pm_idle)
 		arm_pm_idle = pm_idle;
@@ -1484,6 +1535,27 @@ void __init sam9x60_pm_init(void)
 	soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
 }
 
+void __init sam9x7_pm_init(void)
+{
+	static const int modes[] __initconst = {
+		AT91_PM_STANDBY, AT91_PM_ULP0,
+	};
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_SOC_SAM9X7))
+		return;
+
+	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
+	ret = at91_dt_ramc(false);
+	if (ret)
+		return;
+
+	at91_pm_init(NULL);
+
+	soc_pm.ws_ids = sam9x7_ws_ids;
+	soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
+}
+
 void __init at91sam9_pm_init(void)
 {
 	int ret;
@@ -1618,7 +1690,7 @@ void __init sama7_pm_init(void)
 	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
 	at91_pm_init(NULL);
 
-	soc_pm.ws_ids = sama7g5_ws_ids;
+	soc_pm.ws_ids = sama7_ws_ids;
 	soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
 
 	soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 53bdc9000e44..50c3a425d140 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -39,6 +39,7 @@ struct at91_pm_data {
 	unsigned int suspend_mode;
 	unsigned int pmc_mckr_offset;
 	unsigned int pmc_version;
+	unsigned int pmc_mcks;
 };
 #endif
 
diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c
index 40bd4e8fe40a..0ca5da66dc26 100644
--- a/arch/arm/mach-at91/pm_data-offsets.c
+++ b/arch/arm/mach-at91/pm_data-offsets.c
@@ -18,6 +18,8 @@ int main(void)
 						 pmc_mckr_offset));
 	DEFINE(PM_DATA_PMC_VERSION,	offsetof(struct at91_pm_data,
 						 pmc_version));
+	DEFINE(PM_DATA_PMC_MCKS,	offsetof(struct at91_pm_data,
+						 pmc_mcks));
 
 	return 0;
 }
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index abe4ced33eda..2e639f9ed648 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -12,6 +12,10 @@
 #include "pm.h"
 #include "pm_data-offsets.h"
 
+#ifdef CONFIG_CPU_V7
+.arch armv7-a
+#endif
+
 #define	SRAMC_SELF_FRESH_ACTIVE		0x01
 #define	SRAMC_SELF_FRESH_EXIT		0x00
 
@@ -83,29 +87,6 @@ tmp3	.req	r6
 
 	.endm
 
-/**
- * Set state for 2.5V low power regulator
- * @ena: 0 - disable regulator
- *	 1 - enable regulator
- *
- * Side effects: overwrites r7, r8, r9, r10
- */
-	.macro at91_2_5V_reg_set_low_power ena
-#ifdef CONFIG_SOC_SAMA7
-	ldr	r7, .sfrbu
-	mov	r8, #\ena
-	ldr	r9, [r7, #AT91_SFRBU_25LDOCR]
-	orr	r9, r9, #AT91_SFRBU_25LDOCR_LP
-	cmp	r8, #1
-	beq	lp_done_\ena
-	bic	r9, r9, #AT91_SFRBU_25LDOCR_LP
-lp_done_\ena:
-	ldr	r10, =AT91_SFRBU_25LDOCR_LDOANAKEY
-	orr	r9, r9, r10
-	str	r9, [r7, #AT91_SFRBU_25LDOCR]
-#endif
-	.endm
-
 	.macro at91_backup_set_lpm reg
 #ifdef CONFIG_SOC_SAMA7
 	orr	\reg, \reg, #0x200000
@@ -169,12 +150,23 @@ sr_ena_2:
 	cmp	tmp1, #UDDRC_STAT_SELFREF_TYPE_SW
 	bne	sr_ena_2
 
-	/* Put DDR PHY's DLL in bypass mode for non-backup modes. */
+	/* Disable DX DLLs for non-backup modes. */
 	cmp	r7, #AT91_PM_BACKUP
 	beq	sr_ena_3
-	ldr	tmp1, [r3, #DDR3PHY_PIR]
-	orr	tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
-	str	tmp1, [r3, #DDR3PHY_PIR]
+
+	/* Do not soft reset the AC DLL. */
+	ldr	tmp1, [r3, DDR3PHY_ACDLLCR]
+	bic	tmp1, tmp1, DDR3PHY_ACDLLCR_DLLSRST
+	str	tmp1, [r3, DDR3PHY_ACDLLCR]
+
+	/* Disable DX DLLs. */
+	ldr	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+	orr	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+
+	ldr	tmp1, [r3, #DDR3PHY_DX1DLLCR]
+	orr	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX1DLLCR]
 
 sr_ena_3:
 	/* Power down DDR PHY data receivers. */
@@ -221,10 +213,14 @@ sr_ena_3:
 	bic	tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
 	str	tmp1, [r3, #DDR3PHY_DSGCR]
 
-	/* Take DDR PHY's DLL out of bypass mode. */
-	ldr	tmp1, [r3, #DDR3PHY_PIR]
-	bic	tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
-	str	tmp1, [r3, #DDR3PHY_PIR]
+	/* Enable DX DLLs. */
+	ldr	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+	bic	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+
+	ldr	tmp1, [r3, #DDR3PHY_DX1DLLCR]
+	bic	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX1DLLCR]
 
 	/* Enable quasi-dynamic programming. */
 	mov	tmp1, #0
@@ -670,6 +666,10 @@ sr_dis_exit:
 	bic	tmp2, tmp2, #AT91_PMC_PLL_UPDT_ID
 	str	tmp2, [pmc, #AT91_PMC_PLL_UPDT]
 
+	/* save acr */
+	ldr	tmp2, [pmc, #AT91_PMC_PLL_ACR]
+	str	tmp2, .saved_acr
+
 	/* save div. */
 	mov	tmp1, #0
 	ldr	tmp2, [pmc, #AT91_PMC_PLL_CTRL0]
@@ -739,7 +739,7 @@ sr_dis_exit:
 	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
 
 	/* step 2. */
-	ldr	tmp1, =AT91_PMC_PLL_ACR_DEFAULT_PLLA
+	ldr	tmp1, .saved_acr
 	str	tmp1, [pmc, #AT91_PMC_PLL_ACR]
 
 	/* step 3. */
@@ -795,18 +795,20 @@ sr_dis_exit:
 .endm
 
 /**
- * at91_mckx_ps_enable:	save MCK1..4 settings and switch it to main clock
+ * at91_mckx_ps_enable:	save MCK settings and switch it to main clock
  *
- * Side effects: overwrites tmp1, tmp2
+ * Side effects: overwrites tmp1, tmp2, tmp3
  */
 .macro at91_mckx_ps_enable
 #ifdef CONFIG_SOC_SAMA7
 	ldr	pmc, .pmc_base
+	ldr	tmp3, .mcks
 
-	/* There are 4 MCKs we need to handle: MCK1..4 */
+	/* Start at MCK1 and go until MCKs */
 	mov	tmp1, #1
-e_loop:	cmp	tmp1, #5
-	beq	e_done
+e_loop:
+	cmp	tmp1, tmp3
+	bgt	e_done
 
 	/* Write MCK ID to retrieve the settings. */
 	str	tmp1, [pmc, #AT91_PMC_MCR_V2]
@@ -831,7 +833,37 @@ e_save_mck3:
 	b	e_ps
 
 e_save_mck4:
+	cmp	tmp1, #4
+	bne	e_save_mck5
 	str	tmp2, .saved_mck4
+	b	e_ps
+
+e_save_mck5:
+	cmp	tmp1, #5
+	bne	e_save_mck6
+	str	tmp2, .saved_mck5
+	b	e_ps
+
+e_save_mck6:
+	cmp	tmp1, #6
+	bne	e_save_mck7
+	str	tmp2, .saved_mck6
+	b	e_ps
+
+e_save_mck7:
+	cmp	tmp1, #7
+	bne	e_save_mck8
+	str	tmp2, .saved_mck7
+	b	e_ps
+
+e_save_mck8:
+	cmp	tmp1, #8
+	bne	e_save_mck9
+	str	tmp2, .saved_mck8
+	b	e_ps
+
+e_save_mck9:
+	str	tmp2, .saved_mck9
 
 e_ps:
 	/* Use CSS=MAINCK and DIV=1. */
@@ -851,18 +883,20 @@ e_done:
 .endm
 
 /**
- * at91_mckx_ps_restore: restore MCK1..4 settings
+ * at91_mckx_ps_restore: restore MCKx settings
  *
- * Side effects: overwrites tmp1, tmp2
+ * Side effects: overwrites tmp1, tmp2 and tmp3
  */
 .macro at91_mckx_ps_restore
 #ifdef CONFIG_SOC_SAMA7
 	ldr	pmc, .pmc_base
+	ldr	tmp2, .mcks
 
-	/* There are 4 MCKs we need to handle: MCK1..4 */
+	/* Start from MCK1 and go up to MCKs */
 	mov	tmp1, #1
-r_loop:	cmp	tmp1, #5
-	beq	r_done
+r_loop:
+	cmp	tmp1, tmp2
+	bgt	r_done
 
 r_save_mck1:
 	cmp	tmp1, #1
@@ -883,7 +917,37 @@ r_save_mck3:
 	b	r_ps
 
 r_save_mck4:
+	cmp	tmp1, #4
+	bne	r_save_mck5
 	ldr	tmp2, .saved_mck4
+	b	r_ps
+
+r_save_mck5:
+	cmp	tmp1, #5
+	bne	r_save_mck6
+	ldr	tmp2, .saved_mck5
+	b	r_ps
+
+r_save_mck6:
+	cmp	tmp1, #6
+	bne	r_save_mck7
+	ldr	tmp2, .saved_mck6
+	b	r_ps
+
+r_save_mck7:
+	cmp	tmp1, #7
+	bne	r_save_mck8
+	ldr	tmp2, .saved_mck7
+	b	r_ps
+
+r_save_mck8:
+	cmp	tmp1, #8
+	bne	r_save_mck9
+	ldr	tmp2, .saved_mck8
+	b	r_ps
+
+r_save_mck9:
+	ldr	tmp2, .saved_mck9
 
 r_ps:
 	/* Write MCK ID to retrieve the settings. */
@@ -897,11 +961,12 @@ r_ps:
 	bic	tmp3, tmp3, #AT91_PMC_MCR_V2_ID_MSK
 	orr	tmp3, tmp3, tmp1
 	orr	tmp3, tmp3, #AT91_PMC_MCR_V2_CMD
-	str	tmp2, [pmc, #AT91_PMC_MCR_V2]
+	str	tmp3, [pmc, #AT91_PMC_MCR_V2]
 
 	wait_mckrdy tmp1
 
 	add	tmp1, tmp1, #1
+	ldr	tmp2, .mcks
 	b	r_loop
 r_done:
 #endif
@@ -935,9 +1000,6 @@ save_mck:
 
 	at91_plla_disable
 
-	/* Enable low power mode for 2.5V regulator. */
-	at91_2_5V_reg_set_low_power 1
-
 	ldr	tmp3, .pm_mode
 	cmp	tmp3, #AT91_PM_ULP1
 	beq	ulp1_mode
@@ -950,9 +1012,6 @@ ulp1_mode:
 	b	ulp_exit
 
 ulp_exit:
-	/* Disable low power mode for 2.5V regulator. */
-	at91_2_5V_reg_set_low_power 0
-
 	ldr	pmc, .pmc_base
 
 	at91_plla_enable
@@ -1026,6 +1085,10 @@ ENTRY(at91_pm_suspend_in_sram)
 	str	tmp1, .memtype
 	ldr	tmp1, [r0, #PM_DATA_MODE]
 	str	tmp1, .pm_mode
+#ifdef CONFIG_SOC_SAMA7
+	ldr	tmp1, [r0, #PM_DATA_PMC_MCKS]
+	str	tmp1, .mcks
+#endif
 
 	/*
 	 * ldrne below are here to preload their address in the TLB as access
@@ -1113,8 +1176,14 @@ ENDPROC(at91_pm_suspend_in_sram)
 	.word 0
 .pmc_version:
 	.word 0
+#ifdef CONFIG_SOC_SAMA7
+.mcks:
+	.word 0
+#endif
 .saved_mckr:
 	.word 0
+.saved_acr:
+	.word 0
 .saved_pllar:
 	.word 0
 .saved_sam9_lpr:
@@ -1136,6 +1205,16 @@ ENDPROC(at91_pm_suspend_in_sram)
 	.word 0
 .saved_mck4:
 	.word 0
+.saved_mck5:
+	.word 0
+.saved_mck6:
+	.word 0
+.saved_mck7:
+	.word 0
+.saved_mck8:
+	.word 0
+.saved_mck9:
+	.word 0
 #endif
 
 ENTRY(at91_pm_suspend_in_sram_sz)
diff --git a/arch/arm/mach-at91/sam9x7.c b/arch/arm/mach-at91/sam9x7.c
new file mode 100644
index 000000000000..e1ff30b5b09b
--- /dev/null
+++ b/arch/arm/mach-at91/sam9x7.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Setup code for SAM9X7.
+ *
+ * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Varshini Rajendran <varshini.rajendran@microchip.com>
+ */
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+
+#include "generic.h"
+
+static void __init sam9x7_init(void)
+{
+	of_platform_default_populate(NULL, NULL, NULL);
+
+	sam9x7_pm_init();
+}
+
+static const char * const sam9x7_dt_board_compat[] __initconst = {
+	"microchip,sam9x7",
+	NULL
+};
+
+DT_MACHINE_START(sam9x7_dt, "Microchip SAM9X7")
+	/* Maintainer: Microchip */
+	.init_machine	= sam9x7_init,
+	.dt_compat	= sam9x7_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
index 67ed68fbe3a5..bf2b5c6a18c6 100644
--- a/arch/arm/mach-at91/sama5.c
+++ b/arch/arm/mach-at91/sama5.c
@@ -26,7 +26,7 @@ static void sama5_l2c310_write_sec(unsigned long val, unsigned reg)
 static void __init sama5_secure_cache_init(void)
 {
 	sam_secure_init();
-	if (sam_linux_is_optee_available())
+	if (IS_ENABLED(CONFIG_OUTER_CACHE) && sam_linux_is_optee_available())
 		outer_cache.write_sec = sama5_l2c310_write_sec;
 }
 
diff --git a/arch/arm/mach-at91/samv7.c b/arch/arm/mach-at91/samv7.c
index 28f998f0fba5..22d00005ec09 100644
--- a/arch/arm/mach-at91/samv7.c
+++ b/arch/arm/mach-at91/samv7.c
@@ -5,14 +5,7 @@
  *  Copyright (C) 2013 Atmel,
  *                2016 Andras Szemzo <szemzo.andras@gmail.com>
  */
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/of_address.h>
-#include <linux/slab.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/system_misc.h>
-#include "generic.h"
 
 static const char *const samv7_dt_board_compat[] __initconst = {
 	"atmel,samv7",
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 8789d93a7c04..24bc6e18d806 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -93,7 +93,6 @@ config ARCH_BCM_MOBILE
 	select ARM_ERRATA_775420
 	select ARM_GIC
 	select GPIO_BCM_KONA
-	select TICK_ONESHOT
 	select HAVE_ARM_ARCH_TIMER
 	select PINCTRL
 	select ARCH_BCM_MOBILE_SMP if SMP
@@ -186,6 +185,7 @@ config ARCH_BRCMSTB
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_AMBA
 	select ARM_GIC
+	select ARM_GIC_V3
 	select ARM_ERRATA_798181 if SMP
 	select HAVE_ARM_ARCH_TIMER
 	select ZONE_DMA if ARM_LPAE
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 2e523f29ec3b..6baedf4c6304 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -58,5 +58,6 @@ endif
 
 # BCMBCA
 ifeq ($(CONFIG_ARCH_BCMBCA),y)
+obj-$(CONFIG_DEBUG_BCMBCA)	+= board_bcmbca.o
 obj-$(CONFIG_SMP)		+= bcm63xx_smp.o bcm63xx_pmb.o
 endif
diff --git a/arch/arm/mach-bcm/bcm63xx_smp.c b/arch/arm/mach-bcm/bcm63xx_smp.c
index 641e1f8fcf5e..18d0ffc621aa 100644
--- a/arch/arm/mach-bcm/bcm63xx_smp.c
+++ b/arch/arm/mach-bcm/bcm63xx_smp.c
@@ -142,8 +142,7 @@ static int bcm63138_smp_boot_secondary(unsigned int cpu,
 	 */
 	ret = bcm63xx_pmb_power_on_cpu(dn);
 	of_node_put(dn);
-	if (ret)
-		goto out;
+
 out:
 	iounmap(bootlut_base);
 
diff --git a/arch/arm/mach-bcm/bcm_5301x.c b/arch/arm/mach-bcm/bcm_5301x.c
index fe067f6cebb6..cd29496da1ea 100644
--- a/arch/arm/mach-bcm/bcm_5301x.c
+++ b/arch/arm/mach-bcm/bcm_5301x.c
@@ -5,8 +5,6 @@
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
-#include <linux/of_platform.h>
-#include <asm/hardware/cache-l2x0.h>
 
 #include <asm/mach/arch.h>
 #include <asm/siginfo.h>
diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c
index 185335843bbd..f236e12d7a59 100644
--- a/arch/arm/mach-bcm/bcm_kona_smc.c
+++ b/arch/arm/mach-bcm/bcm_kona_smc.c
@@ -31,34 +31,23 @@ static const struct of_device_id bcm_kona_smc_ids[] __initconst = {
 int __init bcm_kona_smc_init(void)
 {
 	struct device_node *node;
-	const __be32 *prop_val;
-	u64 prop_size = 0;
-	unsigned long buffer_size;
-	u32 buffer_phys;
+	struct resource res;
+	int ret;
 
 	/* Read buffer addr and size from the device tree node */
 	node = of_find_matching_node(NULL, bcm_kona_smc_ids);
 	if (!node)
 		return -ENODEV;
 
-	prop_val = of_get_address(node, 0, &prop_size, NULL);
+	ret = of_address_to_resource(node, 0, &res);
 	of_node_put(node);
-	if (!prop_val)
+	if (ret)
 		return -EINVAL;
 
-	/* We assume space for four 32-bit arguments */
-	if (prop_size < 4 * sizeof(u32) || prop_size > (u64)ULONG_MAX)
-		return -EINVAL;
-	buffer_size = (unsigned long)prop_size;
-
-	buffer_phys = be32_to_cpup(prop_val);
-	if (!buffer_phys)
-		return -EINVAL;
-
-	bcm_smc_buffer = ioremap(buffer_phys, buffer_size);
+	bcm_smc_buffer = ioremap(res.start, resource_size(&res));
 	if (!bcm_smc_buffer)
 		return -ENOMEM;
-	bcm_smc_buffer_phys = buffer_phys;
+	bcm_smc_buffer_phys = res.start;
 
 	pr_info("Kona Secure API initialized\n");
 
diff --git a/arch/arm/mach-bcm/board_bcm23550.c b/arch/arm/mach-bcm/board_bcm23550.c
index dd6e9cb785e0..3784b7372ad8 100644
--- a/arch/arm/mach-bcm/board_bcm23550.c
+++ b/arch/arm/mach-bcm/board_bcm23550.c
@@ -1,8 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 // Copyright (C) 2016 Broadcom
 
-#include <linux/of_platform.h>
-
 #include <asm/mach/arch.h>
 
 static const char * const bcm23550_dt_compat[] = {
diff --git a/arch/arm/mach-bcm/board_bcmbca.c b/arch/arm/mach-bcm/board_bcmbca.c
new file mode 100644
index 000000000000..b510d959870a
--- /dev/null
+++ b/arch/arm/mach-bcm/board_bcmbca.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2024 Linus Walleij <linus.walleij@linaro.org>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+/* This is needed for LL-debug/earlyprintk/debug-macro.S */
+static struct map_desc bcmbca_io_desc[] __initdata = {
+	{
+		.virtual = CONFIG_DEBUG_UART_VIRT,
+		.pfn = __phys_to_pfn(CONFIG_DEBUG_UART_PHYS),
+		.length = SZ_4K,
+		.type = MT_DEVICE,
+	},
+};
+
+static void __init bcmbca_map_io(void)
+{
+	iotable_init(bcmbca_io_desc, ARRAY_SIZE(bcmbca_io_desc));
+}
+
+static const char * const bcmbca_dt_compat[] = {
+	/* TODO: Add other BCMBCA SoCs here to get debug UART support */
+	"brcm,bcm6846",
+	NULL,
+};
+
+DT_MACHINE_START(BCMBCA_DT, "BCMBCA Broadband Access Processors")
+	.map_io = bcmbca_map_io,
+	.dt_compat = bcmbca_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c
index 2e3385ced82a..27948b515993 100644
--- a/arch/arm/mach-bcm/brcmstb.c
+++ b/arch/arm/mach-bcm/brcmstb.c
@@ -3,7 +3,6 @@
 
 #include <linux/init.h>
 #include <linux/irqchip.h>
-#include <linux/of_platform.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -24,11 +23,6 @@ u32 brcmstb_uart_config[3] = {
 	0,
 };
 
-static void __init brcmstb_init_irq(void)
-{
-	irqchip_init();
-}
-
 static const char *const brcmstb_match[] __initconst = {
 	"brcm,bcm7445",
 	"brcm,brcmstb",
@@ -37,5 +31,4 @@ static const char *const brcmstb_match[] __initconst = {
 
 DT_MACHINE_START(BRCMSTB, "Broadcom STB (Flattened Device Tree)")
 	.dt_compat	= brcmstb_match,
-	.init_irq	= brcmstb_init_irq,
 MACHINE_END
diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c
index 8989299ebdd6..07aeda1d66a8 100644
--- a/arch/arm/mach-bcm/platsmp-brcmstb.c
+++ b/arch/arm/mach-bcm/platsmp-brcmstb.c
@@ -10,8 +10,8 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/jiffies.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_platform.h>
 #include <linux/printk.h>
 #include <linux/regmap.h>
 #include <linux/smp.h>
diff --git a/arch/arm/mach-berlin/berlin.c b/arch/arm/mach-berlin/berlin.c
index 2424ad40190c..13d5c899f09e 100644
--- a/arch/arm/mach-berlin/berlin.c
+++ b/arch/arm/mach-berlin/berlin.c
@@ -8,11 +8,6 @@
  *  (c) Marvell International Ltd.
  */
 
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/of_platform.h>
-#include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 
 static const char * const berlin_dt_compat[] = {
diff --git a/arch/arm/mach-berlin/platsmp.c b/arch/arm/mach-berlin/platsmp.c
index 593fc4a69d84..ed94758d30ff 100644
--- a/arch/arm/mach-berlin/platsmp.c
+++ b/arch/arm/mach-berlin/platsmp.c
@@ -12,7 +12,7 @@
 
 #include <asm/cacheflush.h>
 #include <asm/cp15.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
deleted file mode 100644
index 1f85deff2486..000000000000
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ /dev/null
@@ -1,21 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menuconfig ARCH_CNS3XXX
-	bool "Cavium Networks CNS3XXX family"
-	depends on ARCH_MULTI_V6
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select ARM_GIC
-	help
-	  Support for Cavium Networks CNS3XXX platform.
-
-if ARCH_CNS3XXX
-
-config MACH_CNS3420VB
-	bool "Support for CNS3420 Validation Board"
-	depends on ATAGS
-	help
-	  Include support for the Cavium Networks CNS3420 MPCore Platform
-	  Baseboard.
-	  This is a platform with an on-board ARM11 MPCore and has support
-	  for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
-
-endif
diff --git a/arch/arm/mach-cns3xxx/Makefile b/arch/arm/mach-cns3xxx/Makefile
deleted file mode 100644
index 52ca6ed62304..000000000000
--- a/arch/arm/mach-cns3xxx/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx.o
-cns3xxx-y				+= core.o pm.o
-cns3xxx-$(CONFIG_ATAGS)			+= devices.o
-cns3xxx-$(CONFIG_PCI)			+= pcie.o
-cns3xxx-$(CONFIG_MACH_CNS3420VB)	+= cns3420vb.o
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
deleted file mode 100644
index 9099560aa462..000000000000
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ /dev/null
@@ -1,252 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Cavium Networks CNS3420 Validation Board
- *
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2008 ARM Limited
- * Copyright 2008 Cavium Networks
- *		  Scott Shu
- * Copyright 2010 MontaVista Software, LLC.
- *		  Anton Vorontsov <avorontsov@mvista.com>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/compiler.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include "cns3xxx.h"
-#include "pm.h"
-#include "core.h"
-#include "devices.h"
-
-/*
- * NOR Flash
- */
-static struct mtd_partition cns3420_nor_partitions[] = {
-	{
-		.name		= "uboot",
-		.size		= 0x00040000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.size		= 0x004C0000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "filesystem",
-		.size		= 0x7000000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "filesystem2",
-		.size		= 0x0AE0000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "ubootenv",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	},
-};
-
-static struct physmap_flash_data cns3420_nor_pdata = {
-	.width = 2,
-	.parts = cns3420_nor_partitions,
-	.nr_parts = ARRAY_SIZE(cns3420_nor_partitions),
-};
-
-static struct resource cns3420_nor_res = {
-	.start = CNS3XXX_FLASH_BASE,
-	.end = CNS3XXX_FLASH_BASE + SZ_128M - 1,
-	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct platform_device cns3420_nor_pdev = {
-	.name = "physmap-flash",
-	.id = 0,
-	.resource = &cns3420_nor_res,
-	.num_resources = 1,
-	.dev = {
-		.platform_data = &cns3420_nor_pdata,
-	},
-};
-
-/*
- * UART
- */
-static void __init cns3420_early_serial_setup(void)
-{
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	static struct uart_port cns3420_serial_port = {
-		.membase        = (void __iomem *)CNS3XXX_UART0_BASE_VIRT,
-		.mapbase        = CNS3XXX_UART0_BASE,
-		.irq            = IRQ_CNS3XXX_UART0,
-		.iotype         = UPIO_MEM,
-		.flags          = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
-		.regshift       = 2,
-		.uartclk        = 24000000,
-		.line           = 0,
-		.type           = PORT_16550A,
-		.fifosize       = 16,
-	};
-
-	early_serial_setup(&cns3420_serial_port);
-#endif
-}
-
-/*
- * USB
- */
-static struct resource cns3xxx_usb_ehci_resources[] = {
-	[0] = {
-		.start = CNS3XXX_USB_BASE,
-		.end   = CNS3XXX_USB_BASE + SZ_16M - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_CNS3XXX_USB_EHCI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static u64 cns3xxx_usb_ehci_dma_mask = DMA_BIT_MASK(32);
-
-static int csn3xxx_usb_power_on(struct platform_device *pdev)
-{
-	/*
-	 * EHCI and OHCI share the same clock and power,
-	 * resetting twice would cause the 1st controller been reset.
-	 * Therefore only do power up  at the first up device, and
-	 * power down at the last down device.
-	 *
-	 * Set USB AHB INCR length to 16
-	 */
-	if (atomic_inc_return(&usb_pwr_ref) == 1) {
-		cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
-		cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-		cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
-		__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
-			MISC_CHIP_CONFIG_REG);
-	}
-
-	return 0;
-}
-
-static void csn3xxx_usb_power_off(struct platform_device *pdev)
-{
-	/*
-	 * EHCI and OHCI share the same clock and power,
-	 * resetting twice would cause the 1st controller been reset.
-	 * Therefore only do power up  at the first up device, and
-	 * power down at the last down device.
-	 */
-	if (atomic_dec_return(&usb_pwr_ref) == 0)
-		cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-}
-
-static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = {
-	.power_on	= csn3xxx_usb_power_on,
-	.power_off	= csn3xxx_usb_power_off,
-};
-
-static struct platform_device cns3xxx_usb_ehci_device = {
-	.name          = "ehci-platform",
-	.num_resources = ARRAY_SIZE(cns3xxx_usb_ehci_resources),
-	.resource      = cns3xxx_usb_ehci_resources,
-	.dev           = {
-		.dma_mask          = &cns3xxx_usb_ehci_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data     = &cns3xxx_usb_ehci_pdata,
-	},
-};
-
-static struct resource cns3xxx_usb_ohci_resources[] = {
-	[0] = {
-		.start = CNS3XXX_USB_OHCI_BASE,
-		.end   = CNS3XXX_USB_OHCI_BASE + SZ_16M - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_CNS3XXX_USB_OHCI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static u64 cns3xxx_usb_ohci_dma_mask = DMA_BIT_MASK(32);
-
-static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = {
-	.num_ports	= 1,
-	.power_on	= csn3xxx_usb_power_on,
-	.power_off	= csn3xxx_usb_power_off,
-};
-
-static struct platform_device cns3xxx_usb_ohci_device = {
-	.name          = "ohci-platform",
-	.num_resources = ARRAY_SIZE(cns3xxx_usb_ohci_resources),
-	.resource      = cns3xxx_usb_ohci_resources,
-	.dev           = {
-		.dma_mask          = &cns3xxx_usb_ohci_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data	   = &cns3xxx_usb_ohci_pdata,
-	},
-};
-
-/*
- * Initialization
- */
-static struct platform_device *cns3420_pdevs[] __initdata = {
-	&cns3420_nor_pdev,
-	&cns3xxx_usb_ehci_device,
-	&cns3xxx_usb_ohci_device,
-};
-
-static void __init cns3420_init(void)
-{
-	cns3xxx_l2x0_init();
-
-	platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
-
-	cns3xxx_ahci_init();
-	cns3xxx_sdhci_init();
-
-	pm_power_off = cns3xxx_power_off;
-}
-
-static struct map_desc cns3420_io_desc[] __initdata = {
-	{
-		.virtual	= CNS3XXX_UART0_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init cns3420_map_io(void)
-{
-	cns3xxx_map_io();
-	iotable_init(cns3420_io_desc, ARRAY_SIZE(cns3420_io_desc));
-
-	cns3420_early_serial_setup();
-}
-
-MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
-	.atag_offset	= 0x100,
-	.map_io		= cns3420_map_io,
-	.init_irq	= cns3xxx_init_irq,
-	.init_time	= cns3xxx_timer_init,
-	.init_machine	= cns3420_init,
-	.init_late      = cns3xxx_pcie_init_late,
-	.restart	= cns3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/cns3xxx.h b/arch/arm/mach-cns3xxx/cns3xxx.h
deleted file mode 100644
index cbb105a74f90..000000000000
--- a/arch/arm/mach-cns3xxx/cns3xxx.h
+++ /dev/null
@@ -1,593 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2008 Cavium Networks
- */
-
-#ifndef __MACH_BOARD_CNS3XXXH
-#define __MACH_BOARD_CNS3XXXH
-
-/*
- * Memory map
- */
-#define CNS3XXX_FLASH_BASE			0x10000000	/* Flash/SRAM Memory Bank 0 */
-#define CNS3XXX_FLASH_SIZE			SZ_256M
-
-#define CNS3XXX_DDR2SDRAM_BASE			0x20000000	/* DDR2 SDRAM Memory */
-
-#define CNS3XXX_SPI_FLASH_BASE			0x60000000	/* SPI Serial Flash Memory */
-
-#define CNS3XXX_SWITCH_BASE			0x70000000	/* Switch and HNAT Control */
-
-#define CNS3XXX_PPE_BASE			0x70001000	/* HANT	*/
-
-#define CNS3XXX_EMBEDDED_SRAM_BASE		0x70002000	/* HANT Embedded SRAM */
-
-#define CNS3XXX_SSP_BASE			0x71000000	/* Synchronous Serial Port - SPI/PCM/I2C */
-
-#define CNS3XXX_DMC_BASE			0x72000000	/* DMC Control (DDR2 SDRAM) */
-
-#define CNS3XXX_SMC_BASE			0x73000000	/* SMC Control */
-
-#define SMC_MEMC_STATUS_OFFSET			0x000
-#define SMC_MEMIF_CFG_OFFSET			0x004
-#define SMC_MEMC_CFG_SET_OFFSET			0x008
-#define SMC_MEMC_CFG_CLR_OFFSET			0x00C
-#define SMC_DIRECT_CMD_OFFSET			0x010
-#define SMC_SET_CYCLES_OFFSET			0x014
-#define SMC_SET_OPMODE_OFFSET			0x018
-#define SMC_REFRESH_PERIOD_0_OFFSET		0x020
-#define SMC_REFRESH_PERIOD_1_OFFSET		0x024
-#define SMC_SRAM_CYCLES0_0_OFFSET		0x100
-#define SMC_NAND_CYCLES0_0_OFFSET		0x100
-#define SMC_OPMODE0_0_OFFSET			0x104
-#define SMC_SRAM_CYCLES0_1_OFFSET		0x120
-#define SMC_NAND_CYCLES0_1_OFFSET		0x120
-#define SMC_OPMODE0_1_OFFSET			0x124
-#define SMC_USER_STATUS_OFFSET			0x200
-#define SMC_USER_CONFIG_OFFSET			0x204
-#define SMC_ECC_STATUS_OFFSET			0x300
-#define SMC_ECC_MEMCFG_OFFSET			0x304
-#define SMC_ECC_MEMCOMMAND1_OFFSET		0x308
-#define SMC_ECC_MEMCOMMAND2_OFFSET		0x30C
-#define SMC_ECC_ADDR0_OFFSET			0x310
-#define SMC_ECC_ADDR1_OFFSET			0x314
-#define SMC_ECC_VALUE0_OFFSET			0x318
-#define SMC_ECC_VALUE1_OFFSET			0x31C
-#define SMC_ECC_VALUE2_OFFSET			0x320
-#define SMC_ECC_VALUE3_OFFSET			0x324
-#define SMC_PERIPH_ID_0_OFFSET			0xFE0
-#define SMC_PERIPH_ID_1_OFFSET			0xFE4
-#define SMC_PERIPH_ID_2_OFFSET			0xFE8
-#define SMC_PERIPH_ID_3_OFFSET			0xFEC
-#define SMC_PCELL_ID_0_OFFSET			0xFF0
-#define SMC_PCELL_ID_1_OFFSET			0xFF4
-#define SMC_PCELL_ID_2_OFFSET			0xFF8
-#define SMC_PCELL_ID_3_OFFSET			0xFFC
-
-#define CNS3XXX_GPIOA_BASE			0x74000000	/* GPIO port A */
-
-#define CNS3XXX_GPIOB_BASE			0x74800000	/* GPIO port B */
-
-#define CNS3XXX_RTC_BASE			0x75000000	/* Real Time Clock */
-
-#define RTC_SEC_OFFSET				0x00
-#define RTC_MIN_OFFSET				0x04
-#define RTC_HOUR_OFFSET				0x08
-#define RTC_DAY_OFFSET				0x0C
-#define RTC_SEC_ALM_OFFSET			0x10
-#define RTC_MIN_ALM_OFFSET			0x14
-#define RTC_HOUR_ALM_OFFSET			0x18
-#define RTC_REC_OFFSET				0x1C
-#define RTC_CTRL_OFFSET				0x20
-#define RTC_INTR_STS_OFFSET			0x34
-
-#define CNS3XXX_MISC_BASE			0x76000000	/* Misc Control */
-#define CNS3XXX_MISC_BASE_VIRT			0xFB000000	/* Misc Control */
-
-#define CNS3XXX_PM_BASE				0x77000000	/* Power Management Control */
-#define CNS3XXX_PM_BASE_VIRT			0xFB001000
-
-#define PM_CLK_GATE_OFFSET			0x00
-#define PM_SOFT_RST_OFFSET			0x04
-#define PM_HS_CFG_OFFSET			0x08
-#define PM_CACTIVE_STA_OFFSET			0x0C
-#define PM_PWR_STA_OFFSET			0x10
-#define PM_SYS_CLK_CTRL_OFFSET			0x14
-#define PM_PLL_LCD_I2S_CTRL_OFFSET		0x18
-#define PM_PLL_HM_PD_OFFSET			0x1C
-
-#define CNS3XXX_UART0_BASE			0x78000000	/* UART 0 */
-#define CNS3XXX_UART0_BASE_VIRT			0xFB002000
-
-#define CNS3XXX_UART1_BASE			0x78400000	/* UART 1 */
-
-#define CNS3XXX_UART2_BASE			0x78800000	/* UART 2 */
-
-#define CNS3XXX_DMAC_BASE			0x79000000	/* Generic DMA Control */
-
-#define CNS3XXX_CORESIGHT_BASE			0x7A000000	/* CoreSight */
-
-#define CNS3XXX_CRYPTO_BASE			0x7B000000	/* Crypto */
-
-#define CNS3XXX_I2S_BASE			0x7C000000	/* I2S */
-
-#define CNS3XXX_TIMER1_2_3_BASE			0x7C800000	/* Timer */
-#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFB003000
-
-#define TIMER1_COUNTER_OFFSET			0x00
-#define TIMER1_AUTO_RELOAD_OFFSET		0x04
-#define TIMER1_MATCH_V1_OFFSET			0x08
-#define TIMER1_MATCH_V2_OFFSET			0x0C
-
-#define TIMER2_COUNTER_OFFSET			0x10
-#define TIMER2_AUTO_RELOAD_OFFSET		0x14
-#define TIMER2_MATCH_V1_OFFSET			0x18
-#define TIMER2_MATCH_V2_OFFSET			0x1C
-
-#define TIMER1_2_CONTROL_OFFSET			0x30
-#define TIMER1_2_INTERRUPT_STATUS_OFFSET	0x34
-#define TIMER1_2_INTERRUPT_MASK_OFFSET		0x38
-
-#define TIMER_FREERUN_OFFSET			0x40
-#define TIMER_FREERUN_CONTROL_OFFSET		0x44
-
-#define CNS3XXX_HCIE_BASE			0x7D000000	/* HCIE Control */
-
-#define CNS3XXX_RAID_BASE			0x7E000000	/* RAID Control */
-
-#define CNS3XXX_AXI_IXC_BASE			0x7F000000	/* AXI IXC */
-
-#define CNS3XXX_CLCD_BASE			0x80000000	/* LCD Control */
-
-#define CNS3XXX_USBOTG_BASE			0x81000000	/* USB OTG Control */
-
-#define CNS3XXX_USB_BASE			0x82000000	/* USB Host Control */
-
-#define CNS3XXX_SATA2_BASE			0x83000000	/* SATA */
-#define CNS3XXX_SATA2_SIZE			SZ_16M
-
-#define CNS3XXX_CAMERA_BASE			0x84000000	/* Camera Interface */
-
-#define CNS3XXX_SDIO_BASE			0x85000000	/* SDIO */
-
-#define CNS3XXX_I2S_TDM_BASE			0x86000000	/* I2S TDM */
-
-#define CNS3XXX_2DG_BASE			0x87000000	/* 2D Graphic Control */
-
-#define CNS3XXX_USB_OHCI_BASE			0x88000000	/* USB OHCI */
-
-#define CNS3XXX_L2C_BASE			0x92000000	/* L2 Cache Control */
-
-#define CNS3XXX_PCIE0_MEM_BASE			0xA0000000	/* PCIe Port 0 IO/Memory Space */
-
-#define CNS3XXX_PCIE0_HOST_BASE			0xAB000000	/* PCIe Port 0 RC Base */
-#define CNS3XXX_PCIE0_HOST_BASE_VIRT		0xE1000000
-
-#define CNS3XXX_PCIE0_IO_BASE			0xAC000000	/* PCIe Port 0 */
-
-#define CNS3XXX_PCIE0_CFG0_BASE			0xAD000000	/* PCIe Port 0 CFG Type 0 */
-#define CNS3XXX_PCIE0_CFG0_BASE_VIRT		0xE3000000
-
-#define CNS3XXX_PCIE0_CFG1_BASE			0xAE000000	/* PCIe Port 0 CFG Type 1 */
-#define CNS3XXX_PCIE0_CFG1_BASE_VIRT		0xE4000000
-
-#define CNS3XXX_PCIE0_MSG_BASE			0xAF000000	/* PCIe Port 0 Message Space */
-
-#define CNS3XXX_PCIE1_MEM_BASE			0xB0000000	/* PCIe Port 1 IO/Memory Space */
-
-#define CNS3XXX_PCIE1_HOST_BASE			0xBB000000	/* PCIe Port 1 RC Base */
-#define CNS3XXX_PCIE1_HOST_BASE_VIRT		0xE9000000
-
-#define CNS3XXX_PCIE1_IO_BASE			0xBC000000	/* PCIe Port 1 */
-
-#define CNS3XXX_PCIE1_CFG0_BASE			0xBD000000	/* PCIe Port 1 CFG Type 0 */
-#define CNS3XXX_PCIE1_CFG0_BASE_VIRT		0xEB000000
-
-#define CNS3XXX_PCIE1_CFG1_BASE			0xBE000000	/* PCIe Port 1 CFG Type 1 */
-#define CNS3XXX_PCIE1_CFG1_BASE_VIRT		0xEC000000
-
-#define CNS3XXX_PCIE1_MSG_BASE			0xBF000000	/* PCIe Port 1 Message Space */
-
-/*
- * Testchip peripheral and fpga gic regions
- */
-#define CNS3XXX_TC11MP_SCU_BASE			0x90000000	/* IRQ, Test chip */
-#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFB004000
-
-#define CNS3XXX_TC11MP_GIC_CPU_BASE		0x90000100	/* Test chip interrupt controller CPU interface */
-#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100)
-
-#define CNS3XXX_TC11MP_TWD_BASE			0x90000600
-#define CNS3XXX_TC11MP_TWD_BASE_VIRT		(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600)
-
-#define CNS3XXX_TC11MP_GIC_DIST_BASE		0x90001000	/* Test chip interrupt controller distributor */
-#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
-
-#define CNS3XXX_TC11MP_L220_BASE		0x92002000	/* L220 registers */
-
-/*
- * Misc block
- */
-#define MISC_MEM_MAP(offs) (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + (offs))
-
-#define MISC_MEMORY_REMAP_REG			MISC_MEM_MAP(0x00)
-#define MISC_CHIP_CONFIG_REG			MISC_MEM_MAP(0x04)
-#define MISC_DEBUG_PROBE_DATA_REG		MISC_MEM_MAP(0x08)
-#define MISC_DEBUG_PROBE_SELECTION_REG		MISC_MEM_MAP(0x0C)
-#define MISC_IO_PIN_FUNC_SELECTION_REG		MISC_MEM_MAP(0x10)
-#define MISC_GPIOA_PIN_ENABLE_REG		MISC_MEM_MAP(0x14)
-#define MISC_GPIOB_PIN_ENABLE_REG		MISC_MEM_MAP(0x18)
-#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A	MISC_MEM_MAP(0x1C)
-#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B	MISC_MEM_MAP(0x20)
-#define MISC_GPIOA_15_0_PULL_CTRL_REG		MISC_MEM_MAP(0x24)
-#define MISC_GPIOA_16_31_PULL_CTRL_REG		MISC_MEM_MAP(0x28)
-#define MISC_GPIOB_15_0_PULL_CTRL_REG		MISC_MEM_MAP(0x2C)
-#define MISC_GPIOB_16_31_PULL_CTRL_REG		MISC_MEM_MAP(0x30)
-#define MISC_IO_PULL_CTRL_REG			MISC_MEM_MAP(0x34)
-#define MISC_E_FUSE_31_0_REG			MISC_MEM_MAP(0x40)
-#define MISC_E_FUSE_63_32_REG			MISC_MEM_MAP(0x44)
-#define MISC_E_FUSE_95_64_REG			MISC_MEM_MAP(0x48)
-#define MISC_E_FUSE_127_96_REG			MISC_MEM_MAP(0x4C)
-#define MISC_SOFTWARE_TEST_1_REG		MISC_MEM_MAP(0x50)
-#define MISC_SOFTWARE_TEST_2_REG		MISC_MEM_MAP(0x54)
-
-#define MISC_SATA_POWER_MODE			MISC_MEM_MAP(0x310)
-
-#define MISC_USB_CFG_REG			MISC_MEM_MAP(0x800)
-#define MISC_USB_STS_REG			MISC_MEM_MAP(0x804)
-#define MISC_USBPHY00_CFG_REG			MISC_MEM_MAP(0x808)
-#define MISC_USBPHY01_CFG_REG			MISC_MEM_MAP(0x80c)
-#define MISC_USBPHY10_CFG_REG			MISC_MEM_MAP(0x810)
-#define MISC_USBPHY11_CFG_REG			MISC_MEM_MAP(0x814)
-
-#define MISC_PCIEPHY_CMCTL(x)			MISC_MEM_MAP(0x900 + (x) * 0x004)
-#define MISC_PCIEPHY_CTL(x)			MISC_MEM_MAP(0x940 + (x) * 0x100)
-#define MISC_PCIE_AXIS_AWMISC(x)		MISC_MEM_MAP(0x944 + (x) * 0x100)
-#define MISC_PCIE_AXIS_ARMISC(x)		MISC_MEM_MAP(0x948 + (x) * 0x100)
-#define MISC_PCIE_AXIS_RMISC(x)			MISC_MEM_MAP(0x94C + (x) * 0x100)
-#define MISC_PCIE_AXIS_BMISC(x)			MISC_MEM_MAP(0x950 + (x) * 0x100)
-#define MISC_PCIE_AXIM_RMISC(x)			MISC_MEM_MAP(0x954 + (x) * 0x100)
-#define MISC_PCIE_AXIM_BMISC(x)			MISC_MEM_MAP(0x958 + (x) * 0x100)
-#define MISC_PCIE_CTRL(x)			MISC_MEM_MAP(0x95C + (x) * 0x100)
-#define MISC_PCIE_PM_DEBUG(x)			MISC_MEM_MAP(0x960 + (x) * 0x100)
-#define MISC_PCIE_RFC_DEBUG(x)			MISC_MEM_MAP(0x964 + (x) * 0x100)
-#define MISC_PCIE_CXPL_DEBUGL(x)		MISC_MEM_MAP(0x968 + (x) * 0x100)
-#define MISC_PCIE_CXPL_DEBUGH(x)		MISC_MEM_MAP(0x96C + (x) * 0x100)
-#define MISC_PCIE_DIAG_DEBUGH(x)		MISC_MEM_MAP(0x970 + (x) * 0x100)
-#define MISC_PCIE_W1CLR(x)			MISC_MEM_MAP(0x974 + (x) * 0x100)
-#define MISC_PCIE_INT_MASK(x)			MISC_MEM_MAP(0x978 + (x) * 0x100)
-#define MISC_PCIE_INT_STATUS(x)			MISC_MEM_MAP(0x97C + (x) * 0x100)
-
-/*
- * Power management and clock control
- */
-#define PMU_MEM_MAP(offs) (void __iomem *)(CNS3XXX_PM_BASE_VIRT + (offs))
-
-#define PM_CLK_GATE_REG					PMU_MEM_MAP(0x000)
-#define PM_SOFT_RST_REG					PMU_MEM_MAP(0x004)
-#define PM_HS_CFG_REG					PMU_MEM_MAP(0x008)
-#define PM_CACTIVE_STA_REG				PMU_MEM_MAP(0x00C)
-#define PM_PWR_STA_REG					PMU_MEM_MAP(0x010)
-#define PM_CLK_CTRL_REG					PMU_MEM_MAP(0x014)
-#define PM_PLL_LCD_I2S_CTRL_REG				PMU_MEM_MAP(0x018)
-#define PM_PLL_HM_PD_CTRL_REG				PMU_MEM_MAP(0x01C)
-#define PM_REGULAT_CTRL_REG				PMU_MEM_MAP(0x020)
-#define PM_WDT_CTRL_REG					PMU_MEM_MAP(0x024)
-#define PM_WU_CTRL0_REG					PMU_MEM_MAP(0x028)
-#define PM_WU_CTRL1_REG					PMU_MEM_MAP(0x02C)
-#define PM_CSR_REG					PMU_MEM_MAP(0x030)
-
-/* PM_CLK_GATE_REG */
-#define PM_CLK_GATE_REG_OFFSET_SDIO			(25)
-#define PM_CLK_GATE_REG_OFFSET_GPU			(24)
-#define PM_CLK_GATE_REG_OFFSET_CIM			(23)
-#define PM_CLK_GATE_REG_OFFSET_LCDC			(22)
-#define PM_CLK_GATE_REG_OFFSET_I2S			(21)
-#define PM_CLK_GATE_REG_OFFSET_RAID			(20)
-#define PM_CLK_GATE_REG_OFFSET_SATA			(19)
-#define PM_CLK_GATE_REG_OFFSET_PCIE(x)			(17 + (x))
-#define PM_CLK_GATE_REG_OFFSET_USB_HOST			(16)
-#define PM_CLK_GATE_REG_OFFSET_USB_OTG			(15)
-#define PM_CLK_GATE_REG_OFFSET_TIMER			(14)
-#define PM_CLK_GATE_REG_OFFSET_CRYPTO			(13)
-#define PM_CLK_GATE_REG_OFFSET_HCIE			(12)
-#define PM_CLK_GATE_REG_OFFSET_SWITCH			(11)
-#define PM_CLK_GATE_REG_OFFSET_GPIO			(10)
-#define PM_CLK_GATE_REG_OFFSET_UART3			(9)
-#define PM_CLK_GATE_REG_OFFSET_UART2			(8)
-#define PM_CLK_GATE_REG_OFFSET_UART1			(7)
-#define PM_CLK_GATE_REG_OFFSET_RTC			(5)
-#define PM_CLK_GATE_REG_OFFSET_GDMA			(4)
-#define PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C		(3)
-#define PM_CLK_GATE_REG_OFFSET_SMC_NFI			(1)
-#define PM_CLK_GATE_REG_MASK				(0x03FFFFBA)
-
-/* PM_SOFT_RST_REG */
-#define PM_SOFT_RST_REG_OFFST_WARM_RST_FLAG		(31)
-#define PM_SOFT_RST_REG_OFFST_CPU1			(29)
-#define PM_SOFT_RST_REG_OFFST_CPU0			(28)
-#define PM_SOFT_RST_REG_OFFST_SDIO			(25)
-#define PM_SOFT_RST_REG_OFFST_GPU			(24)
-#define PM_SOFT_RST_REG_OFFST_CIM			(23)
-#define PM_SOFT_RST_REG_OFFST_LCDC			(22)
-#define PM_SOFT_RST_REG_OFFST_I2S			(21)
-#define PM_SOFT_RST_REG_OFFST_RAID			(20)
-#define PM_SOFT_RST_REG_OFFST_SATA			(19)
-#define PM_SOFT_RST_REG_OFFST_PCIE(x)			(17 + (x))
-#define PM_SOFT_RST_REG_OFFST_USB_HOST			(16)
-#define PM_SOFT_RST_REG_OFFST_USB_OTG			(15)
-#define PM_SOFT_RST_REG_OFFST_TIMER			(14)
-#define PM_SOFT_RST_REG_OFFST_CRYPTO			(13)
-#define PM_SOFT_RST_REG_OFFST_HCIE			(12)
-#define PM_SOFT_RST_REG_OFFST_SWITCH			(11)
-#define PM_SOFT_RST_REG_OFFST_GPIO			(10)
-#define PM_SOFT_RST_REG_OFFST_UART3			(9)
-#define PM_SOFT_RST_REG_OFFST_UART2			(8)
-#define PM_SOFT_RST_REG_OFFST_UART1			(7)
-#define PM_SOFT_RST_REG_OFFST_RTC			(5)
-#define PM_SOFT_RST_REG_OFFST_GDMA			(4)
-#define PM_SOFT_RST_REG_OFFST_SPI_PCM_I2C		(3)
-#define PM_SOFT_RST_REG_OFFST_DMC			(2)
-#define PM_SOFT_RST_REG_OFFST_SMC_NFI			(1)
-#define PM_SOFT_RST_REG_OFFST_GLOBAL			(0)
-#define PM_SOFT_RST_REG_MASK				(0xF3FFFFBF)
-
-/* PMHS_CFG_REG */
-#define PM_HS_CFG_REG_OFFSET_SDIO			(25)
-#define PM_HS_CFG_REG_OFFSET_GPU			(24)
-#define PM_HS_CFG_REG_OFFSET_CIM			(23)
-#define PM_HS_CFG_REG_OFFSET_LCDC			(22)
-#define PM_HS_CFG_REG_OFFSET_I2S			(21)
-#define PM_HS_CFG_REG_OFFSET_RAID			(20)
-#define PM_HS_CFG_REG_OFFSET_SATA			(19)
-#define PM_HS_CFG_REG_OFFSET_PCIE1			(18)
-#define PM_HS_CFG_REG_OFFSET_PCIE0			(17)
-#define PM_HS_CFG_REG_OFFSET_USB_HOST			(16)
-#define PM_HS_CFG_REG_OFFSET_USB_OTG			(15)
-#define PM_HS_CFG_REG_OFFSET_TIMER			(14)
-#define PM_HS_CFG_REG_OFFSET_CRYPTO			(13)
-#define PM_HS_CFG_REG_OFFSET_HCIE			(12)
-#define PM_HS_CFG_REG_OFFSET_SWITCH			(11)
-#define PM_HS_CFG_REG_OFFSET_GPIO			(10)
-#define PM_HS_CFG_REG_OFFSET_UART3			(9)
-#define PM_HS_CFG_REG_OFFSET_UART2			(8)
-#define PM_HS_CFG_REG_OFFSET_UART1			(7)
-#define PM_HS_CFG_REG_OFFSET_RTC			(5)
-#define PM_HS_CFG_REG_OFFSET_GDMA			(4)
-#define PM_HS_CFG_REG_OFFSET_SPI_PCM_I2S		(3)
-#define PM_HS_CFG_REG_OFFSET_DMC			(2)
-#define PM_HS_CFG_REG_OFFSET_SMC_NFI			(1)
-#define PM_HS_CFG_REG_MASK				(0x03FFFFBE)
-#define PM_HS_CFG_REG_MASK_SUPPORT			(0x01100806)
-
-/* PM_CACTIVE_STA_REG */
-#define PM_CACTIVE_STA_REG_OFFSET_SDIO			(25)
-#define PM_CACTIVE_STA_REG_OFFSET_GPU			(24)
-#define PM_CACTIVE_STA_REG_OFFSET_CIM			(23)
-#define PM_CACTIVE_STA_REG_OFFSET_LCDC			(22)
-#define PM_CACTIVE_STA_REG_OFFSET_I2S			(21)
-#define PM_CACTIVE_STA_REG_OFFSET_RAID			(20)
-#define PM_CACTIVE_STA_REG_OFFSET_SATA			(19)
-#define PM_CACTIVE_STA_REG_OFFSET_PCIE1			(18)
-#define PM_CACTIVE_STA_REG_OFFSET_PCIE0			(17)
-#define PM_CACTIVE_STA_REG_OFFSET_USB_HOST		(16)
-#define PM_CACTIVE_STA_REG_OFFSET_USB_OTG		(15)
-#define PM_CACTIVE_STA_REG_OFFSET_TIMER			(14)
-#define PM_CACTIVE_STA_REG_OFFSET_CRYPTO		(13)
-#define PM_CACTIVE_STA_REG_OFFSET_HCIE			(12)
-#define PM_CACTIVE_STA_REG_OFFSET_SWITCH		(11)
-#define PM_CACTIVE_STA_REG_OFFSET_GPIO			(10)
-#define PM_CACTIVE_STA_REG_OFFSET_UART3			(9)
-#define PM_CACTIVE_STA_REG_OFFSET_UART2			(8)
-#define PM_CACTIVE_STA_REG_OFFSET_UART1			(7)
-#define PM_CACTIVE_STA_REG_OFFSET_RTC			(5)
-#define PM_CACTIVE_STA_REG_OFFSET_GDMA			(4)
-#define PM_CACTIVE_STA_REG_OFFSET_SPI_PCM_I2S		(3)
-#define PM_CACTIVE_STA_REG_OFFSET_DMC			(2)
-#define PM_CACTIVE_STA_REG_OFFSET_SMC_NFI		(1)
-#define PM_CACTIVE_STA_REG_MASK				(0x03FFFFBE)
-
-/* PM_PWR_STA_REG */
-#define PM_PWR_STA_REG_REG_OFFSET_SDIO			(25)
-#define PM_PWR_STA_REG_REG_OFFSET_GPU			(24)
-#define PM_PWR_STA_REG_REG_OFFSET_CIM			(23)
-#define PM_PWR_STA_REG_REG_OFFSET_LCDC			(22)
-#define PM_PWR_STA_REG_REG_OFFSET_I2S			(21)
-#define PM_PWR_STA_REG_REG_OFFSET_RAID			(20)
-#define PM_PWR_STA_REG_REG_OFFSET_SATA			(19)
-#define PM_PWR_STA_REG_REG_OFFSET_PCIE1			(18)
-#define PM_PWR_STA_REG_REG_OFFSET_PCIE0			(17)
-#define PM_PWR_STA_REG_REG_OFFSET_USB_HOST		(16)
-#define PM_PWR_STA_REG_REG_OFFSET_USB_OTG		(15)
-#define PM_PWR_STA_REG_REG_OFFSET_TIMER			(14)
-#define PM_PWR_STA_REG_REG_OFFSET_CRYPTO		(13)
-#define PM_PWR_STA_REG_REG_OFFSET_HCIE			(12)
-#define PM_PWR_STA_REG_REG_OFFSET_SWITCH		(11)
-#define PM_PWR_STA_REG_REG_OFFSET_GPIO			(10)
-#define PM_PWR_STA_REG_REG_OFFSET_UART3			(9)
-#define PM_PWR_STA_REG_REG_OFFSET_UART2			(8)
-#define PM_PWR_STA_REG_REG_OFFSET_UART1			(7)
-#define PM_PWR_STA_REG_REG_OFFSET_RTC			(5)
-#define PM_PWR_STA_REG_REG_OFFSET_GDMA			(4)
-#define PM_PWR_STA_REG_REG_OFFSET_SPI_PCM_I2S		(3)
-#define PM_PWR_STA_REG_REG_OFFSET_DMC			(2)
-#define PM_PWR_STA_REG_REG_OFFSET_SMC_NFI		(1)
-#define PM_PWR_STA_REG_REG_MASK				(0x03FFFFBE)
-
-/* PM_CLK_CTRL_REG */
-#define PM_CLK_CTRL_REG_OFFSET_I2S_MCLK			(31)
-#define PM_CLK_CTRL_REG_OFFSET_DDR2_CHG_EN		(30)
-#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF1_EN		(29)
-#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF0_EN		(28)
-#define PM_CLK_CTRL_REG_OFFSET_TIMER_SIM_MODE		(27)
-#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_DIV		(24)
-#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_SEL		(22)
-#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_DIV		(20)
-#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_SEL		(16)
-#define PM_CLK_CTRL_REG_OFFSET_MDC_DIV			(14)
-#define PM_CLK_CTRL_REG_OFFSET_CRYPTO_CLK_SEL		(12)
-#define PM_CLK_CTRL_REG_OFFSET_CPU_PWR_MODE		(9)
-#define PM_CLK_CTRL_REG_OFFSET_PLL_DDR2_SEL		(7)
-#define PM_CLK_CTRL_REG_OFFSET_DIV_IMMEDIATE		(6)
-#define PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV		(4)
-#define PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL		(0)
-
-#define PM_CPU_CLK_DIV(DIV) { \
-	PM_CLK_CTRL_REG &= ~((0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \
-	PM_CLK_CTRL_REG |= (((DIV)&0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \
-}
-
-#define PM_PLL_CPU_SEL(CPU) { \
-	PM_CLK_CTRL_REG &= ~((0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \
-	PM_CLK_CTRL_REG |= (((CPU)&0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \
-}
-
-/* PM_PLL_LCD_I2S_CTRL_REG */
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_MCLK_SMC_DIV	(22)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_R_SEL		(17)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_P	(11)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_M	(3)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_S	(0)
-
-/* PM_PLL_HM_PD_CTRL_REG */
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1		(11)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0		(10)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2SCD		(6)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2S		(5)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_LCD		(4)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB		(3)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_RGMII		(2)
-#define PM_PLL_HM_PD_CTRL_REG_MASK			(0x00000C7C)
-
-/* PM_WDT_CTRL_REG */
-#define PM_WDT_CTRL_REG_OFFSET_RESET_CPU_ONLY		(0)
-
-/* PM_CSR_REG - Clock Scaling Register*/
-#define PM_CSR_REG_OFFSET_CSR_EN			(30)
-#define PM_CSR_REG_OFFSET_CSR_NUM			(0)
-
-#define CNS3XXX_PWR_CLK_EN(BLOCK) (0x1<<PM_CLK_GATE_REG_OFFSET_##BLOCK)
-
-/* Software reset*/
-#define CNS3XXX_PWR_SOFTWARE_RST(BLOCK) (0x1<<PM_SOFT_RST_REG_OFFST_##BLOCK)
-
-/*
- * CNS3XXX support several power saving mode as following,
- * DFS, IDLE, HALT, DOZE, SLEEP, Hibernate
- */
-#define CNS3XXX_PWR_CPU_MODE_DFS			(0)
-#define CNS3XXX_PWR_CPU_MODE_IDLE			(1)
-#define CNS3XXX_PWR_CPU_MODE_HALT			(2)
-#define CNS3XXX_PWR_CPU_MODE_DOZE			(3)
-#define CNS3XXX_PWR_CPU_MODE_SLEEP			(4)
-#define CNS3XXX_PWR_CPU_MODE_HIBERNATE			(5)
-
-#define CNS3XXX_PWR_PLL(BLOCK)	(0x1<<PM_PLL_HM_PD_CTRL_REG_OFFSET_##BLOCK)
-#define CNS3XXX_PWR_PLL_ALL	PM_PLL_HM_PD_CTRL_REG_MASK
-
-/* Change CPU frequency and divider */
-#define CNS3XXX_PWR_PLL_CPU_300MHZ			(0)
-#define CNS3XXX_PWR_PLL_CPU_333MHZ			(1)
-#define CNS3XXX_PWR_PLL_CPU_366MHZ			(2)
-#define CNS3XXX_PWR_PLL_CPU_400MHZ			(3)
-#define CNS3XXX_PWR_PLL_CPU_433MHZ			(4)
-#define CNS3XXX_PWR_PLL_CPU_466MHZ			(5)
-#define CNS3XXX_PWR_PLL_CPU_500MHZ			(6)
-#define CNS3XXX_PWR_PLL_CPU_533MHZ			(7)
-#define CNS3XXX_PWR_PLL_CPU_566MHZ			(8)
-#define CNS3XXX_PWR_PLL_CPU_600MHZ			(9)
-#define CNS3XXX_PWR_PLL_CPU_633MHZ			(10)
-#define CNS3XXX_PWR_PLL_CPU_666MHZ			(11)
-#define CNS3XXX_PWR_PLL_CPU_700MHZ			(12)
-
-#define CNS3XXX_PWR_CPU_CLK_DIV_BY1			(0)
-#define CNS3XXX_PWR_CPU_CLK_DIV_BY2			(1)
-#define CNS3XXX_PWR_CPU_CLK_DIV_BY4			(2)
-
-/* Change DDR2 frequency */
-#define CNS3XXX_PWR_PLL_DDR2_200MHZ			(0)
-#define CNS3XXX_PWR_PLL_DDR2_266MHZ			(1)
-#define CNS3XXX_PWR_PLL_DDR2_333MHZ			(2)
-#define CNS3XXX_PWR_PLL_DDR2_400MHZ			(3)
-
-void cns3xxx_pwr_soft_rst(unsigned int block);
-void cns3xxx_pwr_clk_en(unsigned int block);
-int cns3xxx_cpu_clock(void);
-
-/*
- * ARM11 MPCore interrupt sources (primary GIC)
- */
-#define IRQ_TC11MP_GIC_START	32
-
-#define IRQ_CNS3XXX_PMU			(IRQ_TC11MP_GIC_START + 0)
-#define IRQ_CNS3XXX_SDIO		(IRQ_TC11MP_GIC_START + 1)
-#define IRQ_CNS3XXX_L2CC		(IRQ_TC11MP_GIC_START + 2)
-#define IRQ_CNS3XXX_RTC			(IRQ_TC11MP_GIC_START + 3)
-#define IRQ_CNS3XXX_I2S			(IRQ_TC11MP_GIC_START + 4)
-#define IRQ_CNS3XXX_PCM			(IRQ_TC11MP_GIC_START + 5)
-#define IRQ_CNS3XXX_SPI			(IRQ_TC11MP_GIC_START + 6)
-#define IRQ_CNS3XXX_I2C			(IRQ_TC11MP_GIC_START + 7)
-#define IRQ_CNS3XXX_CIM			(IRQ_TC11MP_GIC_START + 8)
-#define IRQ_CNS3XXX_GPU			(IRQ_TC11MP_GIC_START + 9)
-#define IRQ_CNS3XXX_LCD			(IRQ_TC11MP_GIC_START + 10)
-#define IRQ_CNS3XXX_GPIOA		(IRQ_TC11MP_GIC_START + 11)
-#define IRQ_CNS3XXX_GPIOB		(IRQ_TC11MP_GIC_START + 12)
-#define IRQ_CNS3XXX_UART0		(IRQ_TC11MP_GIC_START + 13)
-#define IRQ_CNS3XXX_UART1		(IRQ_TC11MP_GIC_START + 14)
-#define IRQ_CNS3XXX_UART2		(IRQ_TC11MP_GIC_START + 15)
-#define IRQ_CNS3XXX_ARM11		(IRQ_TC11MP_GIC_START + 16)
-
-#define IRQ_CNS3XXX_SW_STATUS		(IRQ_TC11MP_GIC_START + 17)
-#define IRQ_CNS3XXX_SW_R0TXC		(IRQ_TC11MP_GIC_START + 18)
-#define IRQ_CNS3XXX_SW_R0RXC		(IRQ_TC11MP_GIC_START + 19)
-#define IRQ_CNS3XXX_SW_R0QE		(IRQ_TC11MP_GIC_START + 20)
-#define IRQ_CNS3XXX_SW_R0QF		(IRQ_TC11MP_GIC_START + 21)
-#define IRQ_CNS3XXX_SW_R1TXC		(IRQ_TC11MP_GIC_START + 22)
-#define IRQ_CNS3XXX_SW_R1RXC		(IRQ_TC11MP_GIC_START + 23)
-#define IRQ_CNS3XXX_SW_R1QE		(IRQ_TC11MP_GIC_START + 24)
-#define IRQ_CNS3XXX_SW_R1QF		(IRQ_TC11MP_GIC_START + 25)
-#define IRQ_CNS3XXX_SW_PPE		(IRQ_TC11MP_GIC_START + 26)
-
-#define IRQ_CNS3XXX_CRYPTO		(IRQ_TC11MP_GIC_START + 27)
-#define IRQ_CNS3XXX_HCIE		(IRQ_TC11MP_GIC_START + 28)
-#define IRQ_CNS3XXX_PCIE0_DEVICE	(IRQ_TC11MP_GIC_START + 29)
-#define IRQ_CNS3XXX_PCIE1_DEVICE	(IRQ_TC11MP_GIC_START + 30)
-#define IRQ_CNS3XXX_USB_OTG		(IRQ_TC11MP_GIC_START + 31)
-#define IRQ_CNS3XXX_USB_EHCI		(IRQ_TC11MP_GIC_START + 32)
-#define IRQ_CNS3XXX_SATA		(IRQ_TC11MP_GIC_START + 33)
-#define IRQ_CNS3XXX_RAID		(IRQ_TC11MP_GIC_START + 34)
-#define IRQ_CNS3XXX_SMC			(IRQ_TC11MP_GIC_START + 35)
-
-#define IRQ_CNS3XXX_DMAC_ABORT		(IRQ_TC11MP_GIC_START + 36)
-#define IRQ_CNS3XXX_DMAC0		(IRQ_TC11MP_GIC_START + 37)
-#define IRQ_CNS3XXX_DMAC1		(IRQ_TC11MP_GIC_START + 38)
-#define IRQ_CNS3XXX_DMAC2		(IRQ_TC11MP_GIC_START + 39)
-#define IRQ_CNS3XXX_DMAC3		(IRQ_TC11MP_GIC_START + 40)
-#define IRQ_CNS3XXX_DMAC4		(IRQ_TC11MP_GIC_START + 41)
-#define IRQ_CNS3XXX_DMAC5		(IRQ_TC11MP_GIC_START + 42)
-#define IRQ_CNS3XXX_DMAC6		(IRQ_TC11MP_GIC_START + 43)
-#define IRQ_CNS3XXX_DMAC7		(IRQ_TC11MP_GIC_START + 44)
-#define IRQ_CNS3XXX_DMAC8		(IRQ_TC11MP_GIC_START + 45)
-#define IRQ_CNS3XXX_DMAC9		(IRQ_TC11MP_GIC_START + 46)
-#define IRQ_CNS3XXX_DMAC10		(IRQ_TC11MP_GIC_START + 47)
-#define IRQ_CNS3XXX_DMAC11		(IRQ_TC11MP_GIC_START + 48)
-#define IRQ_CNS3XXX_DMAC12		(IRQ_TC11MP_GIC_START + 49)
-#define IRQ_CNS3XXX_DMAC13		(IRQ_TC11MP_GIC_START + 50)
-#define IRQ_CNS3XXX_DMAC14		(IRQ_TC11MP_GIC_START + 51)
-#define IRQ_CNS3XXX_DMAC15		(IRQ_TC11MP_GIC_START + 52)
-#define IRQ_CNS3XXX_DMAC16		(IRQ_TC11MP_GIC_START + 53)
-#define IRQ_CNS3XXX_DMAC17		(IRQ_TC11MP_GIC_START + 54)
-
-#define IRQ_CNS3XXX_PCIE0_RC		(IRQ_TC11MP_GIC_START + 55)
-#define IRQ_CNS3XXX_PCIE1_RC		(IRQ_TC11MP_GIC_START + 56)
-#define IRQ_CNS3XXX_TIMER0		(IRQ_TC11MP_GIC_START + 57)
-#define IRQ_CNS3XXX_TIMER1		(IRQ_TC11MP_GIC_START + 58)
-#define IRQ_CNS3XXX_USB_OHCI		(IRQ_TC11MP_GIC_START + 59)
-#define IRQ_CNS3XXX_TIMER2		(IRQ_TC11MP_GIC_START + 60)
-#define IRQ_CNS3XXX_EXTERNAL_PIN0	(IRQ_TC11MP_GIC_START + 61)
-#define IRQ_CNS3XXX_EXTERNAL_PIN1	(IRQ_TC11MP_GIC_START + 62)
-#define IRQ_CNS3XXX_EXTERNAL_PIN2	(IRQ_TC11MP_GIC_START + 63)
-
-#define NR_IRQS_CNS3XXX			(IRQ_TC11MP_GIC_START + 64)
-
-#endif	/* __MACH_BOARD_CNS3XXX_H */
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
deleted file mode 100644
index 3fc4ec830e3a..000000000000
--- a/arch/arm/mach-cns3xxx/core.c
+++ /dev/null
@@ -1,410 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 1999 - 2003 ARM Limited
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2008 Cavium Networks
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/clockchips.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-#include <asm/hardware/cache-l2x0.h>
-#include "cns3xxx.h"
-#include "core.h"
-#include "pm.h"
-
-static struct map_desc cns3xxx_io_desc[] __initdata = {
-	{
-		.virtual	= CNS3XXX_TC11MP_SCU_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TIMER1_2_3_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TIMER1_2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_MISC_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_MISC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PM_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PM_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-#ifdef CONFIG_PCI
-	}, {
-		.virtual	= CNS3XXX_PCIE0_HOST_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PCIE0_CFG0_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE),
-		.length		= SZ_64K, /* really 4 KiB at offset 32 KiB */
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PCIE0_CFG1_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PCIE1_HOST_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PCIE1_CFG0_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE),
-		.length		= SZ_64K, /* really 4 KiB at offset 32 KiB */
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PCIE1_CFG1_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE,
-#endif
-	},
-};
-
-void __init cns3xxx_map_io(void)
-{
-	iotable_init(cns3xxx_io_desc, ARRAY_SIZE(cns3xxx_io_desc));
-}
-
-/* used by entry-macro.S */
-void __init cns3xxx_init_irq(void)
-{
-	gic_init(IOMEM(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT),
-		 IOMEM(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT));
-}
-
-void cns3xxx_power_off(void)
-{
-	u32 __iomem *pm_base = IOMEM(CNS3XXX_PM_BASE_VIRT);
-	u32 clkctrl;
-
-	printk(KERN_INFO "powering system down...\n");
-
-	clkctrl = readl(pm_base + PM_SYS_CLK_CTRL_OFFSET);
-	clkctrl &= 0xfffff1ff;
-	clkctrl |= (0x5 << 9);		/* Hibernate */
-	writel(clkctrl, pm_base + PM_SYS_CLK_CTRL_OFFSET);
-
-}
-
-/*
- * Timer
- */
-static void __iomem *cns3xxx_tmr1;
-
-static int cns3xxx_shutdown(struct clock_event_device *clk)
-{
-	writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	return 0;
-}
-
-static int cns3xxx_set_oneshot(struct clock_event_device *clk)
-{
-	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	/* period set, and timer enabled in 'next_event' hook */
-	ctrl |= (1 << 2) | (1 << 9);
-	writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	return 0;
-}
-
-static int cns3xxx_set_periodic(struct clock_event_device *clk)
-{
-	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	int pclk = cns3xxx_cpu_clock() / 8;
-	int reload;
-
-	reload = pclk * 20 / (3 * HZ) * 0x25000;
-	writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
-	ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
-	writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	return 0;
-}
-
-static int cns3xxx_timer_set_next_event(unsigned long evt,
-					struct clock_event_device *unused)
-{
-	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	writel(evt, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
-	writel(ctrl | (1 << 0), cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	return 0;
-}
-
-static struct clock_event_device cns3xxx_tmr1_clockevent = {
-	.name			= "cns3xxx timer1",
-	.features		= CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_ONESHOT,
-	.set_state_shutdown	= cns3xxx_shutdown,
-	.set_state_periodic	= cns3xxx_set_periodic,
-	.set_state_oneshot	= cns3xxx_set_oneshot,
-	.tick_resume		= cns3xxx_shutdown,
-	.set_next_event		= cns3xxx_timer_set_next_event,
-	.rating			= 350,
-	.cpumask		= cpu_all_mask,
-};
-
-static void __init cns3xxx_clockevents_init(unsigned int timer_irq)
-{
-	cns3xxx_tmr1_clockevent.irq = timer_irq;
-	clockevents_config_and_register(&cns3xxx_tmr1_clockevent,
-					(cns3xxx_cpu_clock() >> 3) * 1000000,
-					0xf, 0xffffffff);
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &cns3xxx_tmr1_clockevent;
-	u32 __iomem *stat = cns3xxx_tmr1 + TIMER1_2_INTERRUPT_STATUS_OFFSET;
-	u32 val;
-
-	/* Clear the interrupt */
-	val = readl(stat);
-	writel(val & ~(1 << 2), stat);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Set up the clock source and clock events devices
- */
-static void __init __cns3xxx_timer_init(unsigned int timer_irq)
-{
-	u32 val;
-	u32 irq_mask;
-
-	/*
-	 * Initialise to a known state (all timers off)
-	 */
-
-	/* disable timer1 and timer2 */
-	writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	/* stop free running timer3 */
-	writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
-
-	/* timer1 */
-	writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
-	writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
-
-	writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET);
-	writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET);
-
-	/* mask irq, non-mask timer1 overflow */
-	irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-	irq_mask &= ~(1 << 2);
-	irq_mask |= 0x03;
-	writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-
-	/* down counter */
-	val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	val |= (1 << 9);
-	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	/* timer2 */
-	writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET);
-	writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET);
-
-	/* mask irq */
-	irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-	irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5));
-	writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-
-	/* down counter */
-	val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	val |= (1 << 10);
-	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	/* Make irqs happen for the system timer */
-	if (request_irq(timer_irq, cns3xxx_timer_interrupt,
-			IRQF_TIMER | IRQF_IRQPOLL, "timer", NULL))
-		pr_err("Failed to request irq %d (timer)\n", timer_irq);
-
-	cns3xxx_clockevents_init(timer_irq);
-}
-
-void __init cns3xxx_timer_init(void)
-{
-	cns3xxx_tmr1 = IOMEM(CNS3XXX_TIMER1_2_3_BASE_VIRT);
-
-	__cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0);
-}
-
-#ifdef CONFIG_CACHE_L2X0
-
-void __init cns3xxx_l2x0_init(void)
-{
-	void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
-	u32 val;
-
-	if (WARN_ON(!base))
-		return;
-
-	/*
-	 * Tag RAM Control register
-	 *
-	 * bit[10:8]	- 1 cycle of write accesses latency
-	 * bit[6:4]	- 1 cycle of read accesses latency
-	 * bit[3:0]	- 1 cycle of setup latency
-	 *
-	 * 1 cycle of latency for setup, read and write accesses
-	 */
-	val = readl(base + L310_TAG_LATENCY_CTRL);
-	val &= 0xfffff888;
-	writel(val, base + L310_TAG_LATENCY_CTRL);
-
-	/*
-	 * Data RAM Control register
-	 *
-	 * bit[10:8]	- 1 cycles of write accesses latency
-	 * bit[6:4]	- 1 cycles of read accesses latency
-	 * bit[3:0]	- 1 cycle of setup latency
-	 *
-	 * 1 cycle of latency for setup, read and write accesses
-	 */
-	val = readl(base + L310_DATA_LATENCY_CTRL);
-	val &= 0xfffff888;
-	writel(val, base + L310_DATA_LATENCY_CTRL);
-
-	/* 32 KiB, 8-way, parity disable */
-	l2x0_init(base, 0x00500000, 0xfe0f0fff);
-}
-
-#endif /* CONFIG_CACHE_L2X0 */
-
-static int csn3xxx_usb_power_on(struct platform_device *pdev)
-{
-	/*
-	 * EHCI and OHCI share the same clock and power,
-	 * resetting twice would cause the 1st controller been reset.
-	 * Therefore only do power up  at the first up device, and
-	 * power down at the last down device.
-	 *
-	 * Set USB AHB INCR length to 16
-	 */
-	if (atomic_inc_return(&usb_pwr_ref) == 1) {
-		cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
-		cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-		cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
-		__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
-			MISC_CHIP_CONFIG_REG);
-	}
-
-	return 0;
-}
-
-static void csn3xxx_usb_power_off(struct platform_device *pdev)
-{
-	/*
-	 * EHCI and OHCI share the same clock and power,
-	 * resetting twice would cause the 1st controller been reset.
-	 * Therefore only do power up  at the first up device, and
-	 * power down at the last down device.
-	 */
-	if (atomic_dec_return(&usb_pwr_ref) == 0)
-		cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-}
-
-static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = {
-	.power_on	= csn3xxx_usb_power_on,
-	.power_off	= csn3xxx_usb_power_off,
-};
-
-static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = {
-	.num_ports	= 1,
-	.power_on	= csn3xxx_usb_power_on,
-	.power_off	= csn3xxx_usb_power_off,
-};
-
-static const struct of_dev_auxdata cns3xxx_auxdata[] __initconst = {
-	{ "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata },
-	{ "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata },
-	{ "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL },
-	{ "cavium,cns3420-sdhci", CNS3XXX_SDIO_BASE, "ahci", NULL },
-	{},
-};
-
-static void __init cns3xxx_init(void)
-{
-	struct device_node *dn;
-
-	cns3xxx_l2x0_init();
-
-	dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-ahci");
-	if (of_device_is_available(dn)) {
-		u32 tmp;
-	
-		tmp = __raw_readl(MISC_SATA_POWER_MODE);
-		tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */
-		tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */
-		__raw_writel(tmp, MISC_SATA_POWER_MODE);
-	
-		/* Enable SATA PHY */
-		cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
-		cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
-	
-		/* Enable SATA Clock */
-		cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
-	
-		/* De-Asscer SATA Reset */
-		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
-	}
-	of_node_put(dn);
-
-	dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci");
-	if (of_device_is_available(dn)) {
-		u32 __iomem *gpioa = IOMEM(CNS3XXX_MISC_BASE_VIRT + 0x0014);
-		u32 gpioa_pins = __raw_readl(gpioa);
-	
-		/* MMC/SD pins share with GPIOA */
-		gpioa_pins |= 0x1fff0004;
-		__raw_writel(gpioa_pins, gpioa);
-	
-		cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
-		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
-	}
-	of_node_put(dn);
-
-	pm_power_off = cns3xxx_power_off;
-
-	of_platform_default_populate(NULL, cns3xxx_auxdata, NULL);
-}
-
-static const char *const cns3xxx_dt_compat[] __initconst = {
-	"cavium,cns3410",
-	"cavium,cns3420",
-	NULL,
-};
-
-DT_MACHINE_START(CNS3XXX_DT, "Cavium Networks CNS3xxx")
-	.dt_compat	= cns3xxx_dt_compat,
-	.map_io		= cns3xxx_map_io,
-	.init_irq	= cns3xxx_init_irq,
-	.init_time	= cns3xxx_timer_init,
-	.init_machine	= cns3xxx_init,
-	.init_late	= cns3xxx_pcie_init_late,
-	.restart	= cns3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
deleted file mode 100644
index a96eabaea301..000000000000
--- a/arch/arm/mach-cns3xxx/core.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2004 ARM Limited
- * Copyright 2008 Cavium Networks
- */
-
-#ifndef __CNS3XXX_CORE_H
-#define __CNS3XXX_CORE_H
-
-#include <linux/reboot.h>
-
-extern void cns3xxx_timer_init(void);
-
-#ifdef CONFIG_CACHE_L2X0
-void __init cns3xxx_l2x0_init(void);
-#else
-static inline void cns3xxx_l2x0_init(void) {}
-#endif /* CONFIG_CACHE_L2X0 */
-
-#ifdef CONFIG_PCI
-extern void __init cns3xxx_pcie_init_late(void);
-#else
-static inline void __init cns3xxx_pcie_init_late(void) {}
-#endif
-
-void __init cns3xxx_map_io(void);
-void __init cns3xxx_init_irq(void);
-void cns3xxx_power_off(void);
-void cns3xxx_restart(enum reboot_mode, const char *);
-
-#endif /* __CNS3XXX_CORE_H */
diff --git a/arch/arm/mach-cns3xxx/devices.c b/arch/arm/mach-cns3xxx/devices.c
deleted file mode 100644
index 0f1ba8a0377d..000000000000
--- a/arch/arm/mach-cns3xxx/devices.c
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * CNS3xxx common devices
- *
- * Copyright 2008 Cavium Networks
- *		  Scott Shu
- * Copyright 2010 MontaVista Software, LLC.
- *		  Anton Vorontsov <avorontsov@mvista.com>
- */
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/compiler.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include "cns3xxx.h"
-#include "pm.h"
-#include "core.h"
-#include "devices.h"
-
-/*
- * AHCI
- */
-static struct resource cns3xxx_ahci_resource[] = {
-	[0] = {
-		.start	= CNS3XXX_SATA2_BASE,
-		.end	= CNS3XXX_SATA2_BASE + CNS3XXX_SATA2_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CNS3XXX_SATA,
-		.end	= IRQ_CNS3XXX_SATA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 cns3xxx_ahci_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device cns3xxx_ahci_pdev = {
-	.name		= "ahci",
-	.id		= 0,
-	.resource	= cns3xxx_ahci_resource,
-	.num_resources	= ARRAY_SIZE(cns3xxx_ahci_resource),
-	.dev		= {
-		.dma_mask		= &cns3xxx_ahci_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init cns3xxx_ahci_init(void)
-{
-	u32 tmp;
-
-	tmp = __raw_readl(MISC_SATA_POWER_MODE);
-	tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */
-	tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */
-	__raw_writel(tmp, MISC_SATA_POWER_MODE);
-
-	/* Enable SATA PHY */
-	cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
-	cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
-
-	/* Enable SATA Clock */
-	cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
-
-	/* De-Asscer SATA Reset */
-	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
-
-	platform_device_register(&cns3xxx_ahci_pdev);
-}
-
-/*
- * SDHCI
- */
-static struct resource cns3xxx_sdhci_resources[] = {
-	[0] = {
-		.start = CNS3XXX_SDIO_BASE,
-		.end   = CNS3XXX_SDIO_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_CNS3XXX_SDIO,
-		.end   = IRQ_CNS3XXX_SDIO,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cns3xxx_sdhci_pdev = {
-	.name		= "sdhci-cns3xxx",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(cns3xxx_sdhci_resources),
-	.resource	= cns3xxx_sdhci_resources,
-};
-
-void __init cns3xxx_sdhci_init(void)
-{
-	u32 __iomem *gpioa = IOMEM(CNS3XXX_MISC_BASE_VIRT + 0x0014);
-	u32 gpioa_pins = __raw_readl(gpioa);
-
-	/* MMC/SD pins share with GPIOA */
-	gpioa_pins |= 0x1fff0004;
-	__raw_writel(gpioa_pins, gpioa);
-
-	cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
-	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
-
-	platform_device_register(&cns3xxx_sdhci_pdev);
-}
diff --git a/arch/arm/mach-cns3xxx/devices.h b/arch/arm/mach-cns3xxx/devices.h
deleted file mode 100644
index ab16530d0116..000000000000
--- a/arch/arm/mach-cns3xxx/devices.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * CNS3xxx common devices
- *
- * Copyright 2008 Cavium Networks
- *		  Scott Shu
- * Copyright 2010 MontaVista Software, LLC.
- *		  Anton Vorontsov <avorontsov@mvista.com>
- */
-
-#ifndef __CNS3XXX_DEVICES_H_
-#define __CNS3XXX_DEVICES_H_
-
-void __init cns3xxx_ahci_init(void);
-void __init cns3xxx_sdhci_init(void);
-
-#endif /* __CNS3XXX_DEVICES_H_ */
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
deleted file mode 100644
index e92fbd679dfb..000000000000
--- a/arch/arm/mach-cns3xxx/pcie.c
+++ /dev/null
@@ -1,290 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * PCI-E support for CNS3xxx
- *
- * Copyright 2008 Cavium Networks
- *		  Richard Liu <richard.liu@caviumnetworks.com>
- * Copyright 2010 MontaVista Software, LLC.
- *		  Anton Vorontsov <avorontsov@mvista.com>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/bug.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <asm/mach/map.h>
-#include "cns3xxx.h"
-#include "core.h"
-
-struct cns3xxx_pcie {
-	void __iomem *host_regs; /* PCI config registers for host bridge */
-	void __iomem *cfg0_regs; /* PCI Type 0 config registers */
-	void __iomem *cfg1_regs; /* PCI Type 1 config registers */
-	unsigned int irqs[2];
-	struct resource res_io;
-	struct resource res_mem;
-	int port;
-	bool linked;
-};
-
-static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata)
-{
-	struct pci_sys_data *root = sysdata;
-
-	return root->private_data;
-}
-
-static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev)
-{
-	return sysdata_to_cnspci(dev->sysdata);
-}
-
-static struct cns3xxx_pcie *pbus_to_cnspci(struct pci_bus *bus)
-{
-	return sysdata_to_cnspci(bus->sysdata);
-}
-
-static void __iomem *cns3xxx_pci_map_bus(struct pci_bus *bus,
-					 unsigned int devfn, int where)
-{
-	struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus);
-	int busno = bus->number;
-	int slot = PCI_SLOT(devfn);
-	void __iomem *base;
-
-	/* If there is no link, just show the CNS PCI bridge. */
-	if (!cnspci->linked && busno > 0)
-		return NULL;
-
-	/*
-	 * The CNS PCI bridge doesn't fit into the PCI hierarchy, though
-	 * we still want to access it.
-	 * We place the host bridge on bus 0, and the directly connected
-	 * device on bus 1, slot 0.
-	 */
-	if (busno == 0) { /* internal PCIe bus, host bridge device */
-		if (devfn == 0) /* device# and function# are ignored by hw */
-			base = cnspci->host_regs;
-		else
-			return NULL; /* no such device */
-
-	} else if (busno == 1) { /* directly connected PCIe device */
-		if (slot == 0) /* device# is ignored by hw */
-			base = cnspci->cfg0_regs;
-		else
-			return NULL; /* no such device */
-	} else /* remote PCI bus */
-		base = cnspci->cfg1_regs + ((busno & 0xf) << 20);
-
-	return base + where + (devfn << 12);
-}
-
-static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-				   int where, int size, u32 *val)
-{
-	int ret;
-	u32 mask = (0x1ull << (size * 8)) - 1;
-	int shift = (where % 4) * 8;
-
-	ret = pci_generic_config_read(bus, devfn, where, size, val);
-
-	if (ret == PCIBIOS_SUCCESSFUL && !bus->number && !devfn &&
-	    (where & 0xffc) == PCI_CLASS_REVISION)
-		/*
-		 * RC's class is 0xb, but Linux PCI driver needs 0x604
-		 * for a PCIe bridge. So we must fixup the class code
-		 * to 0x604 here.
-		 */
-		*val = ((((*val << shift) & 0xff) | (0x604 << 16)) >> shift) & mask;
-
-	return ret;
-}
-
-static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	struct cns3xxx_pcie *cnspci = sysdata_to_cnspci(sys);
-	struct resource *res_io = &cnspci->res_io;
-	struct resource *res_mem = &cnspci->res_mem;
-
-	BUG_ON(request_resource(&iomem_resource, res_io) ||
-	       request_resource(&iomem_resource, res_mem));
-
-	pci_add_resource_offset(&sys->resources, res_io, sys->io_offset);
-	pci_add_resource_offset(&sys->resources, res_mem, sys->mem_offset);
-
-	return 1;
-}
-
-static struct pci_ops cns3xxx_pcie_ops = {
-	.map_bus = cns3xxx_pci_map_bus,
-	.read = cns3xxx_pci_read_config,
-	.write = pci_generic_config_write,
-};
-
-static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev);
-	int irq = cnspci->irqs[!!dev->bus->number];
-
-	pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n",
-		pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn),
-		PCI_FUNC(dev->devfn), slot, pin, irq);
-
-	return irq;
-}
-
-static struct cns3xxx_pcie cns3xxx_pcie[] = {
-	[0] = {
-		.host_regs = (void __iomem *)CNS3XXX_PCIE0_HOST_BASE_VIRT,
-		.cfg0_regs = (void __iomem *)CNS3XXX_PCIE0_CFG0_BASE_VIRT,
-		.cfg1_regs = (void __iomem *)CNS3XXX_PCIE0_CFG1_BASE_VIRT,
-		.res_io = {
-			.name = "PCIe0 I/O space",
-			.start = CNS3XXX_PCIE0_IO_BASE,
-			.end = CNS3XXX_PCIE0_CFG0_BASE - 1, /* 16 MiB */
-			.flags = IORESOURCE_IO,
-		},
-		.res_mem = {
-			.name = "PCIe0 non-prefetchable",
-			.start = CNS3XXX_PCIE0_MEM_BASE,
-			.end = CNS3XXX_PCIE0_HOST_BASE - 1, /* 176 MiB */
-			.flags = IORESOURCE_MEM,
-		},
-		.irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, },
-		.port = 0,
-	},
-	[1] = {
-		.host_regs = (void __iomem *)CNS3XXX_PCIE1_HOST_BASE_VIRT,
-		.cfg0_regs = (void __iomem *)CNS3XXX_PCIE1_CFG0_BASE_VIRT,
-		.cfg1_regs = (void __iomem *)CNS3XXX_PCIE1_CFG1_BASE_VIRT,
-		.res_io = {
-			.name = "PCIe1 I/O space",
-			.start = CNS3XXX_PCIE1_IO_BASE,
-			.end = CNS3XXX_PCIE1_CFG0_BASE - 1, /* 16 MiB */
-			.flags = IORESOURCE_IO,
-		},
-		.res_mem = {
-			.name = "PCIe1 non-prefetchable",
-			.start = CNS3XXX_PCIE1_MEM_BASE,
-			.end = CNS3XXX_PCIE1_HOST_BASE - 1, /* 176 MiB */
-			.flags = IORESOURCE_MEM,
-		},
-		.irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, },
-		.port = 1,
-	},
-};
-
-static void __init cns3xxx_pcie_check_link(struct cns3xxx_pcie *cnspci)
-{
-	int port = cnspci->port;
-	u32 reg;
-	unsigned long time;
-
-	reg = __raw_readl(MISC_PCIE_CTRL(port));
-	/*
-	 * Enable Application Request to 1, it will exit L1 automatically,
-	 * but when chip back, it will use another clock, still can use 0x1.
-	 */
-	reg |= 0x3;
-	__raw_writel(reg, MISC_PCIE_CTRL(port));
-
-	pr_info("PCIe: Port[%d] Enable PCIe LTSSM\n", port);
-	pr_info("PCIe: Port[%d] Check data link layer...", port);
-
-	time = jiffies;
-	while (1) {
-		reg = __raw_readl(MISC_PCIE_PM_DEBUG(port));
-		if (reg & 0x1) {
-			pr_info("Link up.\n");
-			cnspci->linked = 1;
-			break;
-		} else if (time_after(jiffies, time + 50)) {
-			pr_info("Device not found.\n");
-			break;
-		}
-	}
-}
-
-static void cns3xxx_write_config(struct cns3xxx_pcie *cnspci,
-					 int where, int size, u32 val)
-{
-	void __iomem *base = cnspci->host_regs + (where & 0xffc);
-	u32 v;
-	u32 mask = (0x1ull << (size * 8)) - 1;
-	int shift = (where % 4) * 8;
-
-	v = readl_relaxed(base);
-
-	v &= ~(mask << shift);
-	v |= (val & mask) << shift;
-
-	writel_relaxed(v, base);
-	readl_relaxed(base);
-}
-
-static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)
-{
-	u16 mem_base  = cnspci->res_mem.start >> 16;
-	u16 mem_limit = cnspci->res_mem.end   >> 16;
-	u16 io_base   = cnspci->res_io.start  >> 16;
-	u16 io_limit  = cnspci->res_io.end    >> 16;
-
-	cns3xxx_write_config(cnspci, PCI_PRIMARY_BUS, 1, 0);
-	cns3xxx_write_config(cnspci, PCI_SECONDARY_BUS, 1, 1);
-	cns3xxx_write_config(cnspci, PCI_SUBORDINATE_BUS, 1, 1);
-	cns3xxx_write_config(cnspci, PCI_MEMORY_BASE, 2, mem_base);
-	cns3xxx_write_config(cnspci, PCI_MEMORY_LIMIT, 2, mem_limit);
-	cns3xxx_write_config(cnspci, PCI_IO_BASE_UPPER16, 2, io_base);
-	cns3xxx_write_config(cnspci, PCI_IO_LIMIT_UPPER16, 2, io_limit);
-
-	if (!cnspci->linked)
-		return;
-
-	/* Set Device Max_Read_Request_Size to 128 byte */
-	pcie_bus_config = PCIE_BUS_PEER2PEER;
-
-	/* Disable PCIe0 Interrupt Mask INTA to INTD */
-	__raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(cnspci->port));
-}
-
-static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
-				      struct pt_regs *regs)
-{
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-	return 0;
-}
-
-void __init cns3xxx_pcie_init_late(void)
-{
-	int i;
-	void *private_data;
-	struct hw_pci hw_pci = {
-	       .nr_controllers = 1,
-	       .ops = &cns3xxx_pcie_ops,
-	       .setup = cns3xxx_pci_setup,
-	       .map_irq = cns3xxx_pcie_map_irq,
-	       .private_data = &private_data,
-	};
-
-	pcibios_min_io = 0;
-	pcibios_min_mem = 0;
-
-	hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0,
-			"imprecise external abort");
-
-	for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
-		cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i));
-		cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i));
-		cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
-		cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
-		private_data = &cns3xxx_pcie[i];
-		pci_common_init(&hw_pci);
-	}
-
-	pci_assign_unassigned_resources();
-}
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
deleted file mode 100644
index 72e8a7ec7a38..000000000000
--- a/arch/arm/mach-cns3xxx/pm.c
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2008 Cavium Networks
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/atomic.h>
-#include "cns3xxx.h"
-#include "pm.h"
-#include "core.h"
-
-void cns3xxx_pwr_clk_en(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_CLK_GATE_REG);
-
-	reg |= (block & PM_CLK_GATE_REG_MASK);
-	__raw_writel(reg, PM_CLK_GATE_REG);
-}
-EXPORT_SYMBOL(cns3xxx_pwr_clk_en);
-
-void cns3xxx_pwr_clk_dis(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_CLK_GATE_REG);
-
-	reg &= ~(block & PM_CLK_GATE_REG_MASK);
-	__raw_writel(reg, PM_CLK_GATE_REG);
-}
-EXPORT_SYMBOL(cns3xxx_pwr_clk_dis);
-
-void cns3xxx_pwr_power_up(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
-
-	reg &= ~(block & CNS3XXX_PWR_PLL_ALL);
-	__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
-
-	/* Wait for 300us for the PLL output clock locked. */
-	udelay(300);
-};
-EXPORT_SYMBOL(cns3xxx_pwr_power_up);
-
-void cns3xxx_pwr_power_down(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
-
-	/* write '1' to power down */
-	reg |= (block & CNS3XXX_PWR_PLL_ALL);
-	__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
-};
-EXPORT_SYMBOL(cns3xxx_pwr_power_down);
-
-static void cns3xxx_pwr_soft_rst_force(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_SOFT_RST_REG);
-
-	/*
-	 * bit 0, 28, 29 => program low to reset,
-	 * the other else program low and then high
-	 */
-	if (block & 0x30000001) {
-		reg &= ~(block & PM_SOFT_RST_REG_MASK);
-	} else {
-		reg &= ~(block & PM_SOFT_RST_REG_MASK);
-		__raw_writel(reg, PM_SOFT_RST_REG);
-		reg |= (block & PM_SOFT_RST_REG_MASK);
-	}
-
-	__raw_writel(reg, PM_SOFT_RST_REG);
-}
-
-void cns3xxx_pwr_soft_rst(unsigned int block)
-{
-	static unsigned int soft_reset;
-
-	if (soft_reset & block) {
-		/* SPI/I2C/GPIO use the same block, reset once. */
-		return;
-	} else {
-		soft_reset |= block;
-	}
-	cns3xxx_pwr_soft_rst_force(block);
-}
-EXPORT_SYMBOL(cns3xxx_pwr_soft_rst);
-
-void cns3xxx_restart(enum reboot_mode mode, const char *cmd)
-{
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA.
-	 */
-	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(GLOBAL));
-}
-
-/*
- * cns3xxx_cpu_clock - return CPU/L2 clock
- *  aclk: cpu clock/2
- *  hclk: cpu clock/4
- *  pclk: cpu clock/8
- */
-int cns3xxx_cpu_clock(void)
-{
-	u32 reg = __raw_readl(PM_CLK_CTRL_REG);
-	int cpu;
-	int cpu_sel;
-	int div_sel;
-
-	cpu_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf;
-	div_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
-
-	cpu = (300 + ((cpu_sel / 3) * 100) + ((cpu_sel % 3) * 33)) >> div_sel;
-
-	return cpu;
-}
-EXPORT_SYMBOL(cns3xxx_cpu_clock);
-
-atomic_t usb_pwr_ref = ATOMIC_INIT(0);
-EXPORT_SYMBOL(usb_pwr_ref);
diff --git a/arch/arm/mach-cns3xxx/pm.h b/arch/arm/mach-cns3xxx/pm.h
deleted file mode 100644
index 61b73e59f0ff..000000000000
--- a/arch/arm/mach-cns3xxx/pm.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2004 ARM Limited
- * Copyright 2008 Cavium Networks
- */
-
-#ifndef __CNS3XXX_PM_H
-#define __CNS3XXX_PM_H
-
-#include <linux/atomic.h>
-
-void cns3xxx_pwr_clk_en(unsigned int block);
-void cns3xxx_pwr_clk_dis(unsigned int block);
-void cns3xxx_pwr_power_up(unsigned int block);
-void cns3xxx_pwr_power_down(unsigned int block);
-
-extern atomic_t usb_pwr_ref;
-
-#endif /* __CNS3XXX_PM_H */
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index c8cbd9a30791..6cd6d29a2c9d 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -4,174 +4,29 @@ menuconfig ARCH_DAVINCI
 	bool "TI DaVinci"
 	depends on ARCH_MULTI_V5
 	depends on CPU_LITTLE_ENDIAN
+	select ARCH_DAVINCI_DA850
+	select CPU_ARM926T
 	select DAVINCI_TIMER
 	select ZONE_DMA
 	select PM_GENERIC_DOMAINS if PM
 	select PM_GENERIC_DOMAINS_OF if PM && OF
 	select REGMAP_MMIO
 	select RESET_CONTROLLER
+	select PINCTRL
 	select PINCTRL_SINGLE
 
 if ARCH_DAVINCI
 
-config ARCH_DAVINCI_DMx
-	bool
-
 comment "DaVinci Core Type"
 
-config ARCH_DAVINCI_DM355
-	bool "DaVinci 355 based system"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select DAVINCI_AINTC
-	select ARCH_DAVINCI_DMx
-
-config ARCH_DAVINCI_DA830
-	bool "DA830/OMAP-L137/AM17x based system"
-	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
-	depends on ATAGS
-	select ARCH_DAVINCI_DA8XX
-	# needed on silicon revs 1.0, 1.1:
-	select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
-	select DAVINCI_CP_INTC
-
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
-	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
-	depends on ATAGS
 	select ARCH_DAVINCI_DA8XX
 	select DAVINCI_CP_INTC
 
 config ARCH_DAVINCI_DA8XX
 	bool
 
-config ARCH_DAVINCI_DM365
-	bool "DaVinci 365 based system"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select DAVINCI_AINTC
-	select ARCH_DAVINCI_DMx
-
-comment "DaVinci Board Type"
-
-config MACH_DA8XX_DT
-	bool "Support DA8XX platforms using device tree"
-	default y
-	depends on ARCH_DAVINCI_DA850
-	select PINCTRL
-	help
-	  Say y here to include support for TI DaVinci DA850 based using
-	  Flattened Device Tree. More information at Documentation/devicetree
-
-config MACH_DAVINCI_DM355_EVM
-	bool "TI DM355 EVM"
-	default ARCH_DAVINCI_DM355
-	depends on ARCH_DAVINCI_DM355
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a DM355 EVM
-
-config MACH_DM355_LEOPARD
-	bool "DM355 Leopard board"
-	depends on ARCH_DAVINCI_DM355
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a DM355 Leopard board.
-
-config MACH_DAVINCI_DM365_EVM
-	bool "TI DM365 EVM"
-	default ARCH_DAVINCI_DM365
-	depends on ARCH_DAVINCI_DM365
-	help
-	  Configure this option to specify whether the board used
-	  for development is a DM365 EVM
-
-config MACH_DAVINCI_DA830_EVM
-	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
-	default ARCH_DAVINCI_DA830
-	depends on ATAGS && UNUSED_BOARD_FILES
-	depends on ARCH_DAVINCI_DA830
-	select GPIO_PCF857X if I2C
-	help
-	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
-
-choice
-	prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
-	depends on MACH_DAVINCI_DA830_EVM
-	help
-	  The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
-	  detected automatically based on successful probe of the I2C
-	  based GPIO expander on that board. This option selected in this
-	  menu has an effect only in case of a successful UI card detection.
-
-config DA830_UI_LCD
-	bool "LCD"
-	help
-	  Say Y here to use the LCD as a framebuffer or simple character
-	  display.
-
-config DA830_UI_NAND
-	bool "NAND flash"
-	help
-	  Say Y here to use the NAND flash. Do not forget to setup
-	  the switch correctly.
-endchoice
-
-config MACH_DAVINCI_DA850_EVM
-	bool "TI DA850/OMAP-L138/AM18x Reference Platform"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	default ARCH_DAVINCI_DA850
-	depends on ARCH_DAVINCI_DA850
-	help
-	  Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
-
-choice
-	prompt "Select peripherals connected to expander on UI board"
-	depends on MACH_DAVINCI_DA850_EVM
-	help
-	  The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
-	  EVM is detected automatically based on successful probe of the I2C
-	  based GPIO expander on that card. This option selected in this
-	  menu has an effect only in case of a successful UI card detection.
-
-config DA850_UI_NONE
-	bool "No peripheral is enabled"
-	help
-	  Say Y if you do not want to enable any of the peripherals connected
-	  to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
-
-config DA850_UI_RMII
-	bool "RMII Ethernet PHY"
-	help
-	  Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
-	  EVM. This PHY is found on the UI daughter card that is supplied with
-	  the EVM.
-	  NOTE: Please take care while choosing this option, MII PHY will
-	  not be functional if RMII mode is selected.
-
-config DA850_UI_SD_VIDEO_PORT
-	bool "Video Port Interface"
-	help
-	  Say Y if you want to use Video Port Interface (VPIF) on the
-	  DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
-	  UI daughter card that is supplied with the EVM.
-
-endchoice
-
-config MACH_MITYOMAPL138
-	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
-	depends on ARCH_DAVINCI_DA850
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
-	  System on Module.  Information on this SoM may be found at
-	  https://www.mitydsp.com
-
-config MACH_OMAPL138_HAWKBOARD
-	bool "TI AM1808 / OMAPL-138 Hawkboard platform"
-	depends on ARCH_DAVINCI_DA850
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
-
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
 	depends on ARCH_DAVINCI
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 3f4894aa7528..7a210db669f4 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,28 +5,16 @@
 #
 #
 # Common objects
-obj-y 					:= serial.o usb.o common.o sram.o
+obj-y 					:= common.o sram.o devices-da8xx.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
 # Chip specific
-obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DA830)	+= da830.o devices-da8xx.o usb-da8xx.o
-obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= da850.o devices-da8xx.o usb-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= da850.o pdata-quirks.o
 
-# Board specific
-obj-$(CONFIG_MACH_DA8XX_DT)		+= da8xx-dt.o pdata-quirks.o
-obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
-obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
-obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
-obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
-obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
-obj-$(CONFIG_MACH_MITYOMAPL138)		+= board-mityomapl138.o
-obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD)	+= board-omapl138-hawk.o
+obj-y					+= da8xx-dt.o
 
 # Power Management
-obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_HAVE_CLK)			+= pm_domain.o
 ifeq ($(CONFIG_SUSPEND),y)
 obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= pm.o sleep.o
diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot
deleted file mode 100644
index d36b251f325b..000000000000
--- a/arch/arm/mach-davinci/Makefile.boot
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-zreladdr-$(CONFIG_ARCH_DAVINCI_DA8XX)		+= 0xc0008000
-params_phys-$(CONFIG_ARCH_DAVINCI_DA8XX)	:= 0xc0000100
-initrd_phys-$(CONFIG_ARCH_DAVINCI_DA8XX)	:= 0xc0800000
-
-zreladdr-$(CONFIG_ARCH_DAVINCI_DMx)		+= 0x80008000
-params_phys-$(CONFIG_ARCH_DAVINCI_DMx)		:= 0x80000100
-initrd_phys-$(CONFIG_ARCH_DAVINCI_DMx)		:= 0x80800000
diff --git a/arch/arm/mach-davinci/asp.h b/arch/arm/mach-davinci/asp.h
deleted file mode 100644
index d0ecd1d0f084..000000000000
--- a/arch/arm/mach-davinci/asp.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * TI DaVinci Audio definitions
- */
-#ifndef __ASM_ARCH_DAVINCI_ASP_H
-#define __ASM_ARCH_DAVINCI_ASP_H
-
-/* Bases of dm644x and dm355 register banks */
-#define DAVINCI_ASP0_BASE	0x01E02000
-#define DAVINCI_ASP1_BASE	0x01E04000
-
-/* Bases of dm365 register banks */
-#define DAVINCI_DM365_ASP0_BASE	0x01D02000
-
-/* Bases of dm646x register banks */
-#define DAVINCI_DM646X_MCASP0_REG_BASE		0x01D01000
-#define DAVINCI_DM646X_MCASP1_REG_BASE		0x01D01800
-
-/* Bases of da850/da830 McASP0  register banks */
-#define DAVINCI_DA8XX_MCASP0_REG_BASE	0x01D00000
-
-/* Bases of da830 McASP1 register banks */
-#define DAVINCI_DA830_MCASP1_REG_BASE	0x01D04000
-
-/* Bases of da830 McASP2 register banks */
-#define DAVINCI_DA830_MCASP2_REG_BASE	0x01D08000
-
-/* EDMA channels of dm644x and dm355 */
-#define DAVINCI_DMA_ASP0_TX	2
-#define DAVINCI_DMA_ASP0_RX	3
-#define DAVINCI_DMA_ASP1_TX	8
-#define DAVINCI_DMA_ASP1_RX	9
-
-/* EDMA channels of dm646x */
-#define DAVINCI_DM646X_DMA_MCASP0_AXEVT0	6
-#define DAVINCI_DM646X_DMA_MCASP0_AREVT0	9
-#define DAVINCI_DM646X_DMA_MCASP1_AXEVT1	12
-
-/* EDMA channels of da850/da830 McASP0 */
-#define DAVINCI_DA8XX_DMA_MCASP0_AREVT	0
-#define DAVINCI_DA8XX_DMA_MCASP0_AXEVT	1
-
-/* EDMA channels of da830 McASP1 */
-#define DAVINCI_DA830_DMA_MCASP1_AREVT	2
-#define DAVINCI_DA830_DMA_MCASP1_AXEVT	3
-
-/* EDMA channels of da830 McASP2 */
-#define DAVINCI_DA830_DMA_MCASP2_AREVT	4
-#define DAVINCI_DA830_DMA_MCASP2_AXEVT	5
-
-/* Interrupts */
-#define DAVINCI_ASP0_RX_INT	DAVINCI_INTC_IRQ(IRQ_MBRINT)
-#define DAVINCI_ASP0_TX_INT	DAVINCI_INTC_IRQ(IRQ_MBXINT)
-#define DAVINCI_ASP1_RX_INT	DAVINCI_INTC_IRQ(IRQ_MBRINT)
-#define DAVINCI_ASP1_TX_INT	DAVINCI_INTC_IRQ(IRQ_MBXINT)
-
-#endif /* __ASM_ARCH_DAVINCI_ASP_H */
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
deleted file mode 100644
index 6299e5c8f4ea..000000000000
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ /dev/null
@@ -1,690 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DA830/OMAP L137 EVM board
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- * Derived from: arch/arm/mach-davinci/board-dm644x-evm.c
- *
- * 2007, 2009 (c) MontaVista Software, Inc.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/property.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/nvmem-provider.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "mux.h"
-#include "da8xx.h"
-#include "irqs.h"
-
-#define DA830_EVM_PHY_ID		""
-/*
- * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
- */
-#define ON_BD_USB_DRV	GPIO_TO_PIN(1, 15)
-#define ON_BD_USB_OVC	GPIO_TO_PIN(2, 4)
-
-static const short da830_evm_usb11_pins[] = {
-	DA830_GPIO1_15, DA830_GPIO2_4,
-	-1
-};
-
-static struct regulator_consumer_supply da830_evm_usb_supplies[] = {
-	REGULATOR_SUPPLY("vbus", NULL),
-};
-
-static struct regulator_init_data da830_evm_usb_vbus_data = {
-	.consumer_supplies	= da830_evm_usb_supplies,
-	.num_consumer_supplies	= ARRAY_SIZE(da830_evm_usb_supplies),
-	.constraints    = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config da830_evm_usb_vbus = {
-	.supply_name		= "vbus",
-	.microvolts		= 33000000,
-	.init_data		= &da830_evm_usb_vbus_data,
-};
-
-static struct platform_device da830_evm_usb_vbus_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &da830_evm_usb_vbus,
-	},
-};
-
-static struct gpiod_lookup_table da830_evm_usb_oc_gpio_lookup = {
-	.dev_id		= "ohci-da8xx",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table da830_evm_usb_vbus_gpio_lookup = {
-	.dev_id		= "reg-fixed-voltage.0",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, NULL, 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table *da830_evm_usb_gpio_lookups[] = {
-	&da830_evm_usb_oc_gpio_lookup,
-	&da830_evm_usb_vbus_gpio_lookup,
-};
-
-static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = {
-	/* TPS2065 switch @ 5V */
-	.potpgt		= (3 + 1) / 2,	/* 3 ms max */
-};
-
-static __init void da830_evm_usb_init(void)
-{
-	int ret;
-
-	ret = da8xx_register_usb_phy_clocks();
-	if (ret)
-		pr_warn("%s: USB PHY CLK registration failed: %d\n",
-			__func__, ret);
-
-	gpiod_add_lookup_tables(da830_evm_usb_gpio_lookups,
-				ARRAY_SIZE(da830_evm_usb_gpio_lookups));
-
-	ret = da8xx_register_usb_phy();
-	if (ret)
-		pr_warn("%s: USB PHY registration failed: %d\n",
-			__func__, ret);
-
-	ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
-	if (ret)
-		pr_warn("%s: USB 2.0 PinMux setup failed: %d\n", __func__, ret);
-	else {
-		/*
-		 * TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A),
-		 * with the power on to power good time of 3 ms.
-		 */
-		ret = da8xx_register_usb20(1000, 3);
-		if (ret)
-			pr_warn("%s: USB 2.0 registration failed: %d\n",
-				__func__, ret);
-	}
-
-	ret = davinci_cfg_reg_list(da830_evm_usb11_pins);
-	if (ret) {
-		pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	ret = platform_device_register(&da830_evm_usb_vbus_device);
-	if (ret) {
-		pr_warn("%s: Unable to register the vbus supply\n", __func__);
-		return;
-	}
-
-	ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
-	if (ret)
-		pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
-}
-
-static const short da830_evm_mcasp1_pins[] = {
-	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1,
-	DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5,
-	DA830_ACLKR1, DA830_AXR1_6, DA830_AXR1_7, DA830_AXR1_8, DA830_AXR1_10,
-	DA830_AXR1_11,
-	-1
-};
-
-static u8 da830_iis_serializer_direction[] = {
-	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	TX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-};
-
-static struct snd_platform_data da830_evm_snd_data = {
-	.tx_dma_offset  = 0x2000,
-	.rx_dma_offset  = 0x2000,
-	.op_mode        = DAVINCI_MCASP_IIS_MODE,
-	.num_serializer = ARRAY_SIZE(da830_iis_serializer_direction),
-	.tdm_slots      = 2,
-	.serial_dir     = da830_iis_serializer_direction,
-	.asp_chan_q     = EVENTQ_0,
-	.version	= MCASP_VERSION_2,
-	.txnumevt	= 1,
-	.rxnumevt	= 1,
-};
-
-/*
- * GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS.
- */
-static const short da830_evm_mmc_sd_pins[] = {
-	DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
-	DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
-	DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
-	DA830_MMCSD_CMD,   DA830_GPIO2_1,     DA830_GPIO2_2,
-	-1
-};
-
-#define DA830_MMCSD_WP_PIN		GPIO_TO_PIN(2, 1)
-#define DA830_MMCSD_CD_PIN		GPIO_TO_PIN(2, 2)
-
-static struct gpiod_lookup_table mmc_gpios_table = {
-	.dev_id = "da830-mmc.0",
-	.table = {
-		/* gpio chip 1 contains gpio range 32-63 */
-		GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_CD_PIN, "cd",
-			    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp",
-			    GPIO_ACTIVE_LOW),
-		{ }
-	},
-};
-
-static struct davinci_mmc_config da830_evm_mmc_config = {
-	.wires			= 8,
-	.max_freq		= 50000000,
-	.caps			= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static inline void da830_evm_init_mmc(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(da830_evm_mmc_sd_pins);
-	if (ret) {
-		pr_warn("%s: mmc/sd mux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	gpiod_add_lookup_table(&mmc_gpios_table);
-
-	ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
-	if (ret) {
-		pr_warn("%s: mmc/sd registration failed: %d\n", __func__, ret);
-		gpiod_remove_lookup_table(&mmc_gpios_table);
-	}
-}
-
-#define HAS_MMC		IS_ENABLED(CONFIG_MMC_DAVINCI)
-
-#ifdef CONFIG_DA830_UI_NAND
-static struct mtd_partition da830_evm_nand_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	[0] = {
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* bootloader params in the next sector */
-	[1] = {
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* kernel */
-	[2] = {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-		.mask_flags	= 0,
-	},
-	/* file system */
-	[3] = {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-};
-
-/* flash bbt descriptors */
-static uint8_t da830_evm_nand_bbt_pattern[] = { 'B', 'b', 't', '0' };
-static uint8_t da830_evm_nand_mirror_pattern[] = { '1', 't', 'b', 'B' };
-
-static struct nand_bbt_descr da830_evm_nand_bbt_main_descr = {
-	.options	= NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
-			  NAND_BBT_WRITE | NAND_BBT_2BIT |
-			  NAND_BBT_VERSION | NAND_BBT_PERCHIP,
-	.offs		= 2,
-	.len		= 4,
-	.veroffs	= 16,
-	.maxblocks	= 4,
-	.pattern	= da830_evm_nand_bbt_pattern
-};
-
-static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = {
-	.options	= NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
-			  NAND_BBT_WRITE | NAND_BBT_2BIT |
-			  NAND_BBT_VERSION | NAND_BBT_PERCHIP,
-	.offs		= 2,
-	.len		= 4,
-	.veroffs	= 16,
-	.maxblocks	= 4,
-	.pattern	= da830_evm_nand_mirror_pattern
-};
-
-static struct davinci_aemif_timing da830_evm_nandflash_timing = {
-	.wsetup         = 24,
-	.wstrobe        = 21,
-	.whold          = 14,
-	.rsetup         = 19,
-	.rstrobe        = 50,
-	.rhold          = 0,
-	.ta             = 20,
-};
-
-static struct davinci_nand_pdata da830_evm_nand_pdata = {
-	.core_chipsel	= 1,
-	.parts		= da830_evm_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(da830_evm_nand_partitions),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_bits	= 4,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.bbt_td		= &da830_evm_nand_bbt_main_descr,
-	.bbt_md		= &da830_evm_nand_bbt_mirror_descr,
-	.timing         = &da830_evm_nandflash_timing,
-};
-
-static struct resource da830_evm_nand_resources[] = {
-	[0] = {		/* First memory resource is NAND I/O window */
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + PAGE_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {		/* Second memory resource is AEMIF control registers */
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da830_evm_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 1,
-		.dev		= {
-			.platform_data	= &da830_evm_nand_pdata,
-		},
-		.num_resources	= ARRAY_SIZE(da830_evm_nand_resources),
-		.resource	= da830_evm_nand_resources,
-	},
-};
-
-static struct resource da830_evm_aemif_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct aemif_abus_data da830_evm_aemif_abus_data[] = {
-	{
-		.cs	= 3,
-	},
-};
-
-static struct aemif_platform_data da830_evm_aemif_pdata = {
-	.abus_data		= da830_evm_aemif_abus_data,
-	.num_abus_data		= ARRAY_SIZE(da830_evm_aemif_abus_data),
-	.sub_devices		= da830_evm_aemif_devices,
-	.num_sub_devices	= ARRAY_SIZE(da830_evm_aemif_devices),
-	.cs_offset		= 2,
-};
-
-static struct platform_device da830_evm_aemif_device = {
-	.name		= "ti-aemif",
-	.id		= -1,
-	.dev = {
-		.platform_data = &da830_evm_aemif_pdata,
-	},
-	.resource	= da830_evm_aemif_resource,
-	.num_resources	= ARRAY_SIZE(da830_evm_aemif_resource),
-};
-
-/*
- * UI board NAND/NOR flashes only use 8-bit data bus.
- */
-static const short da830_evm_emif25_pins[] = {
-	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
-	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
-	DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
-	DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
-	DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
-	DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE,
-	DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0,
-	-1
-};
-
-static inline void da830_evm_init_nand(int mux_mode)
-{
-	int ret;
-
-	if (HAS_MMC) {
-		pr_warn("WARNING: both MMC/SD and NAND are enabled, but they share AEMIF pins\n"
-			"\tDisable MMC/SD for NAND support\n");
-		return;
-	}
-
-	ret = davinci_cfg_reg_list(da830_evm_emif25_pins);
-	if (ret)
-		pr_warn("%s: emif25 mux setup failed: %d\n", __func__, ret);
-
-	ret = platform_device_register(&da830_evm_aemif_device);
-	if (ret)
-		pr_warn("%s: AEMIF device not registered\n", __func__);
-
-	gpio_direction_output(mux_mode, 1);
-}
-#else
-static inline void da830_evm_init_nand(int mux_mode) { }
-#endif
-
-#ifdef CONFIG_DA830_UI_LCD
-static inline void da830_evm_init_lcdc(int mux_mode)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(da830_lcdcntl_pins);
-	if (ret)
-		pr_warn("%s: lcdcntl mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata);
-	if (ret)
-		pr_warn("%s: lcd setup failed: %d\n", __func__, ret);
-
-	gpio_direction_output(mux_mode, 0);
-}
-#else
-static inline void da830_evm_init_lcdc(int mux_mode) { }
-#endif
-
-static struct nvmem_cell_info da830_evm_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x7f00,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table da830_evm_nvmem_cell_table = {
-	.nvmem_name	= "1-00500",
-	.cells		= da830_evm_nvmem_cells,
-	.ncells		= ARRAY_SIZE(da830_evm_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup da830_evm_nvmem_cell_lookup = {
-	.nvmem_name	= "1-00500",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static const struct property_entry da830_evm_i2c_eeprom_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 64),
-	{ }
-};
-
-static const struct software_node da830_evm_i2c_eeprom_node = {
-	.properties = da830_evm_i2c_eeprom_properties,
-};
-
-static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
-		int gpio, unsigned ngpio, void *context)
-{
-	gpio_request(gpio + 6, "UI MUX_MODE");
-
-	/* Drive mux mode low to match the default without UI card */
-	gpio_direction_output(gpio + 6, 0);
-
-	da830_evm_init_lcdc(gpio + 6);
-
-	da830_evm_init_nand(gpio + 6);
-
-	return 0;
-}
-
-static void da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio,
-		unsigned ngpio, void *context)
-{
-	gpio_free(gpio + 6);
-}
-
-static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
-	.gpio_base	= DAVINCI_N_GPIO,
-	.setup		= da830_evm_ui_expander_setup,
-	.teardown	= da830_evm_ui_expander_teardown,
-};
-
-static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.swnode = &da830_evm_i2c_eeprom_node,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	},
-	{
-		I2C_BOARD_INFO("pcf8574", 0x3f),
-		.platform_data	= &da830_evm_ui_expander_info,
-	},
-};
-
-static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
-	.bus_freq	= 100,	/* kHz */
-	.bus_delay	= 0,	/* usec */
-};
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da830/omap-l137 EVM, hence
- * they are being reserved for codecs on the DSP side.
- */
-static const s16 da830_dma_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 8,  2},
-	{12,  2},
-	{24,  4},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da830_dma_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 8,  2},
-	{12,  2},
-	{24,  4},
-	{30, 26},
-	{-1, -1}
-};
-
-static struct edma_rsv_info da830_edma_rsv[] = {
-	{
-		.rsv_chans	= da830_dma_rsv_chans,
-		.rsv_slots	= da830_dma_rsv_slots,
-	},
-};
-
-static struct mtd_partition da830evm_spiflash_part[] = {
-	[0] = {
-		.name = "DSP-UBL",
-		.offset = 0,
-		.size = SZ_8K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[1] = {
-		.name = "ARM-UBL",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_16K + SZ_8K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[2] = {
-		.name = "U-Boot",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_256K - SZ_32K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[3] = {
-		.name = "U-Boot-Environment",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_16K,
-		.mask_flags = 0,
-	},
-	[4] = {
-		.name = "Kernel",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-		.mask_flags = 0,
-	},
-};
-
-static struct flash_platform_data da830evm_spiflash_data = {
-	.name		= "m25p80",
-	.parts		= da830evm_spiflash_part,
-	.nr_parts	= ARRAY_SIZE(da830evm_spiflash_part),
-	.type		= "w25x32",
-};
-
-static struct davinci_spi_config da830evm_spiflash_cfg = {
-	.io_type	= SPI_IO_TYPE_DMA,
-	.c2tdelay	= 8,
-	.t2cdelay	= 8,
-};
-
-static struct spi_board_info da830evm_spi_info[] = {
-	{
-		.modalias		= "m25p80",
-		.platform_data		= &da830evm_spiflash_data,
-		.controller_data	= &da830evm_spiflash_cfg,
-		.mode			= SPI_MODE_0,
-		.max_speed_hz		= 30000000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-	},
-};
-
-static __init void da830_evm_init(void)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	int ret;
-
-	da830_register_clocks();
-
-	ret = da830_register_gpio();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	ret = da830_register_edma(da830_edma_rsv);
-	if (ret)
-		pr_warn("%s: edma registration failed: %d\n", __func__, ret);
-
-	ret = davinci_cfg_reg_list(da830_i2c0_pins);
-	if (ret)
-		pr_warn("%s: i2c0 mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_i2c(0, &da830_evm_i2c_0_pdata);
-	if (ret)
-		pr_warn("%s: i2c0 registration failed: %d\n", __func__, ret);
-
-	da830_evm_usb_init();
-
-	soc_info->emac_pdata->rmii_en = 1;
-	soc_info->emac_pdata->phy_id = DA830_EVM_PHY_ID;
-
-	ret = davinci_cfg_reg_list(da830_cpgmac_pins);
-	if (ret)
-		pr_warn("%s: cpgmac mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warn("%s: emac registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warn("%s: watchdog registration failed: %d\n",
-			__func__, ret);
-
-	davinci_serial_init(da8xx_serial_device);
-
-	nvmem_add_cell_table(&da830_evm_nvmem_cell_table);
-	nvmem_add_cell_lookups(&da830_evm_nvmem_cell_lookup, 1);
-
-	i2c_register_board_info(1, da830_evm_i2c_devices,
-			ARRAY_SIZE(da830_evm_i2c_devices));
-
-	ret = davinci_cfg_reg_list(da830_evm_mcasp1_pins);
-	if (ret)
-		pr_warn("%s: mcasp1 mux setup failed: %d\n", __func__, ret);
-
-	da8xx_register_mcasp(1, &da830_evm_snd_data);
-
-	da830_evm_init_mmc();
-
-	ret = da8xx_register_rtc();
-	if (ret)
-		pr_warn("%s: rtc setup failed: %d\n", __func__, ret);
-
-	ret = spi_register_board_info(da830evm_spi_info,
-				      ARRAY_SIZE(da830evm_spi_info));
-	if (ret)
-		pr_warn("%s: spi info registration failed: %d\n",
-			__func__, ret);
-
-	ret = da8xx_register_spi_bus(0, ARRAY_SIZE(da830evm_spi_info));
-	if (ret)
-		pr_warn("%s: spi 0 registration failed: %d\n", __func__, ret);
-
-	regulator_has_full_constraints();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init da830_evm_console_init(void)
-{
-	if (!machine_is_davinci_da830_evm())
-		return 0;
-
-	return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(da830_evm_console_init);
-#endif
-
-static void __init da830_evm_map_io(void)
-{
-	da830_init();
-}
-
-MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
-	.atag_offset	= 0x100,
-	.map_io		= da830_evm_map_io,
-	.init_irq	= da830_init_irq,
-	.init_time	= da830_init_time,
-	.init_machine	= da830_evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
deleted file mode 100644
index 92d74bc71967..000000000000
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ /dev/null
@@ -1,1554 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DA850/OMAP-L138 EVM board
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/
- *
- * Derived from: arch/arm/mach-davinci/board-da830-evm.c
- * Original Copyrights follow:
- *
- * 2007, 2009 (c) MontaVista Software, Inc.
- */
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio/machine.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/leds.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/input.h>
-#include <linux/input/tps6507x-ts.h>
-#include <linux/mfd/tps6507x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/nvmem-provider.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_data/uio_pruss.h>
-#include <linux/property.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/tps6507x.h>
-#include <linux/regulator/fixed.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include "common.h"
-#include "da8xx.h"
-#include "mux.h"
-#include "irqs.h"
-#include "sram.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/system_info.h>
-
-#include <media/i2c/tvp514x.h>
-#include <media/i2c/adv7343.h>
-
-#define DA850_EVM_PHY_ID		"davinci_mdio-0:00"
-#define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
-#define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)
-
-#define DA850_MII_MDIO_CLKEN_PIN	GPIO_TO_PIN(2, 6)
-
-static struct mtd_partition da850evm_spiflash_part[] = {
-	[0] = {
-		.name = "UBL",
-		.offset = 0,
-		.size = SZ_64K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[1] = {
-		.name = "U-Boot",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_512K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[2] = {
-		.name = "U-Boot-Env",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_64K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[3] = {
-		.name = "Kernel",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_2M + SZ_512K,
-		.mask_flags = 0,
-	},
-	[4] = {
-		.name = "Filesystem",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_4M,
-		.mask_flags = 0,
-	},
-	[5] = {
-		.name = "MAC-Address",
-		.offset = SZ_8M - SZ_64K,
-		.size = SZ_64K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-};
-
-static struct nvmem_cell_info da850evm_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x0,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table da850evm_nvmem_cell_table = {
-	/*
-	 * The nvmem name differs from the partition name because of the
-	 * internal works of the nvmem framework.
-	 */
-	.nvmem_name	= "MAC-Address0",
-	.cells		= da850evm_nvmem_cells,
-	.ncells		= ARRAY_SIZE(da850evm_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup da850evm_nvmem_cell_lookup = {
-	.nvmem_name	= "MAC-Address0",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static struct flash_platform_data da850evm_spiflash_data = {
-	.name		= "m25p80",
-	.parts		= da850evm_spiflash_part,
-	.nr_parts	= ARRAY_SIZE(da850evm_spiflash_part),
-	.type		= "m25p64",
-};
-
-static struct davinci_spi_config da850evm_spiflash_cfg = {
-	.io_type	= SPI_IO_TYPE_DMA,
-	.c2tdelay	= 8,
-	.t2cdelay	= 8,
-};
-
-static struct spi_board_info da850evm_spi_info[] = {
-	{
-		.modalias		= "m25p80",
-		.platform_data		= &da850evm_spiflash_data,
-		.controller_data	= &da850evm_spiflash_cfg,
-		.mode			= SPI_MODE_0,
-		.max_speed_hz		= 30000000,
-		.bus_num		= 1,
-		.chip_select		= 0,
-	},
-};
-
-static struct mtd_partition da850_evm_norflash_partition[] = {
-	{
-		.name           = "bootloaders + env",
-		.offset         = 0,
-		.size           = SZ_512K,
-		.mask_flags     = MTD_WRITEABLE,
-	},
-	{
-		.name           = "kernel",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = SZ_2M,
-		.mask_flags     = 0,
-	},
-	{
-		.name           = "filesystem",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = MTDPART_SIZ_FULL,
-		.mask_flags     = 0,
-	},
-};
-
-static struct physmap_flash_data da850_evm_norflash_data = {
-	.width		= 2,
-	.parts		= da850_evm_norflash_partition,
-	.nr_parts	= ARRAY_SIZE(da850_evm_norflash_partition),
-};
-
-static struct resource da850_evm_norflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS2_BASE,
-		.end	= DA8XX_AEMIF_CS2_BASE + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-/* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
- * (128K blocks). It may be used instead of the (default) SPI flash
- * to boot, using TI's tools to install the secondary boot loader
- * (UBL) and U-Boot.
- */
-static struct mtd_partition da850_evm_nandflash_partition[] = {
-	{
-		.name		= "u-boot env",
-		.offset		= 0,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	 },
-	{
-		.name		= "UBL",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "u-boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 4 * SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel",
-		.offset		= 0x200000,
-		.size		= SZ_2M,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	},
-};
-
-static struct davinci_aemif_timing da850_evm_nandflash_timing = {
-	.wsetup		= 24,
-	.wstrobe	= 21,
-	.whold		= 14,
-	.rsetup		= 19,
-	.rstrobe	= 50,
-	.rhold		= 0,
-	.ta		= 20,
-};
-
-static struct davinci_nand_pdata da850_evm_nandflash_data = {
-	.core_chipsel	= 1,
-	.parts		= da850_evm_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(da850_evm_nandflash_partition),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_bits	= 4,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.timing		= &da850_evm_nandflash_timing,
-};
-
-static struct resource da850_evm_nandflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource da850_evm_aemif_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct aemif_abus_data da850_evm_aemif_abus_data[] = {
-	{
-		.cs	= 3,
-	}
-};
-
-static struct platform_device da850_evm_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 1,
-		.dev		= {
-			.platform_data	= &da850_evm_nandflash_data,
-		},
-		.num_resources	= ARRAY_SIZE(da850_evm_nandflash_resource),
-		.resource	= da850_evm_nandflash_resource,
-	},
-	{
-		.name		= "physmap-flash",
-		.id		= 0,
-		.dev		= {
-			.platform_data  = &da850_evm_norflash_data,
-		},
-		.num_resources	= 1,
-		.resource	= da850_evm_norflash_resource,
-	}
-};
-
-static struct aemif_platform_data da850_evm_aemif_pdata = {
-	.cs_offset = 2,
-	.abus_data = da850_evm_aemif_abus_data,
-	.num_abus_data = ARRAY_SIZE(da850_evm_aemif_abus_data),
-	.sub_devices = da850_evm_aemif_devices,
-	.num_sub_devices = ARRAY_SIZE(da850_evm_aemif_devices),
-};
-
-static struct platform_device da850_evm_aemif_device = {
-	.name		= "ti-aemif",
-	.id		= -1,
-	.dev = {
-		.platform_data	= &da850_evm_aemif_pdata,
-	},
-	.resource	= da850_evm_aemif_resource,
-	.num_resources	= ARRAY_SIZE(da850_evm_aemif_resource),
-};
-
-static const short da850_evm_nand_pins[] = {
-	DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
-	DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7,
-	DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4,
-	DA850_NEMA_WE, DA850_NEMA_OE,
-	-1
-};
-
-static const short da850_evm_nor_pins[] = {
-	DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2,
-	DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1,
-	DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5,
-	DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9,
-	DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13,
-	DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1,
-	DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5,
-	DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9,
-	DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13,
-	DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17,
-	DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21,
-	DA850_EMA_A_22, DA850_EMA_A_23,
-	-1
-};
-
-#define HAS_MMC		IS_ENABLED(CONFIG_MMC_DAVINCI)
-
-static inline void da850_evm_setup_nor_nand(void)
-{
-	int ret = 0;
-
-	if (!HAS_MMC) {
-		ret = davinci_cfg_reg_list(da850_evm_nand_pins);
-		if (ret)
-			pr_warn("%s: NAND mux setup failed: %d\n",
-				__func__, ret);
-
-		ret = davinci_cfg_reg_list(da850_evm_nor_pins);
-		if (ret)
-			pr_warn("%s: NOR mux setup failed: %d\n",
-				__func__, ret);
-
-		ret = platform_device_register(&da850_evm_aemif_device);
-		if (ret)
-			pr_warn("%s: registering aemif failed: %d\n",
-				__func__, ret);
-	}
-}
-
-#ifdef CONFIG_DA850_UI_RMII
-static inline void da850_evm_setup_emac_rmii(int rmii_sel)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	soc_info->emac_pdata->rmii_en = 1;
-	gpio_set_value_cansleep(rmii_sel, 0);
-}
-#else
-static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
-#endif
-
-
-#define DA850_KEYS_DEBOUNCE_MS	10
-/*
- * At 200ms polling interval it is possible to miss an
- * event by tapping very lightly on the push button but most
- * pushes do result in an event; longer intervals require the
- * user to hold the button whereas shorter intervals require
- * more CPU time for polling.
- */
-#define DA850_GPIO_KEYS_POLL_MS	200
-
-enum da850_evm_ui_exp_pins {
-	DA850_EVM_UI_EXP_SEL_C = 5,
-	DA850_EVM_UI_EXP_SEL_B,
-	DA850_EVM_UI_EXP_SEL_A,
-	DA850_EVM_UI_EXP_PB8,
-	DA850_EVM_UI_EXP_PB7,
-	DA850_EVM_UI_EXP_PB6,
-	DA850_EVM_UI_EXP_PB5,
-	DA850_EVM_UI_EXP_PB4,
-	DA850_EVM_UI_EXP_PB3,
-	DA850_EVM_UI_EXP_PB2,
-	DA850_EVM_UI_EXP_PB1,
-};
-
-static const char * const da850_evm_ui_exp[] = {
-	[DA850_EVM_UI_EXP_SEL_C]        = "sel_c",
-	[DA850_EVM_UI_EXP_SEL_B]        = "sel_b",
-	[DA850_EVM_UI_EXP_SEL_A]        = "sel_a",
-	[DA850_EVM_UI_EXP_PB8]          = "pb8",
-	[DA850_EVM_UI_EXP_PB7]          = "pb7",
-	[DA850_EVM_UI_EXP_PB6]          = "pb6",
-	[DA850_EVM_UI_EXP_PB5]          = "pb5",
-	[DA850_EVM_UI_EXP_PB4]          = "pb4",
-	[DA850_EVM_UI_EXP_PB3]          = "pb3",
-	[DA850_EVM_UI_EXP_PB2]          = "pb2",
-	[DA850_EVM_UI_EXP_PB1]          = "pb1",
-};
-
-#define DA850_N_UI_PB		8
-
-static struct gpio_keys_button da850_evm_ui_keys[] = {
-	[0 ... DA850_N_UI_PB - 1] = {
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= DA850_KEYS_DEBOUNCE_MS,
-		.code			= -1, /* assigned at runtime */
-		.gpio			= -1, /* assigned at runtime */
-		.desc			= NULL, /* assigned at runtime */
-	},
-};
-
-static struct gpio_keys_platform_data da850_evm_ui_keys_pdata = {
-	.buttons = da850_evm_ui_keys,
-	.nbuttons = ARRAY_SIZE(da850_evm_ui_keys),
-	.poll_interval = DA850_GPIO_KEYS_POLL_MS,
-};
-
-static struct platform_device da850_evm_ui_keys_device = {
-	.name = "gpio-keys-polled",
-	.id = 0,
-	.dev = {
-		.platform_data = &da850_evm_ui_keys_pdata
-	},
-};
-
-static void da850_evm_ui_keys_init(unsigned gpio)
-{
-	int i;
-	struct gpio_keys_button *button;
-
-	for (i = 0; i < DA850_N_UI_PB; i++) {
-		button = &da850_evm_ui_keys[i];
-		button->code = KEY_F8 - i;
-		button->desc = da850_evm_ui_exp[DA850_EVM_UI_EXP_PB8 + i];
-		button->gpio = gpio + DA850_EVM_UI_EXP_PB8 + i;
-	}
-}
-
-#ifdef CONFIG_DA850_UI_SD_VIDEO_PORT
-static inline void da850_evm_setup_video_port(int video_sel)
-{
-	gpio_set_value_cansleep(video_sel, 0);
-}
-#else
-static inline void da850_evm_setup_video_port(int video_sel) { }
-#endif
-
-static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
-						unsigned ngpio, void *c)
-{
-	int sel_a, sel_b, sel_c, ret;
-
-	sel_a = gpio + DA850_EVM_UI_EXP_SEL_A;
-	sel_b = gpio + DA850_EVM_UI_EXP_SEL_B;
-	sel_c = gpio + DA850_EVM_UI_EXP_SEL_C;
-
-	ret = gpio_request(sel_a, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_A]);
-	if (ret) {
-		pr_warn("Cannot open UI expander pin %d\n", sel_a);
-		goto exp_setup_sela_fail;
-	}
-
-	ret = gpio_request(sel_b, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_B]);
-	if (ret) {
-		pr_warn("Cannot open UI expander pin %d\n", sel_b);
-		goto exp_setup_selb_fail;
-	}
-
-	ret = gpio_request(sel_c, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_C]);
-	if (ret) {
-		pr_warn("Cannot open UI expander pin %d\n", sel_c);
-		goto exp_setup_selc_fail;
-	}
-
-	/* deselect all functionalities */
-	gpio_direction_output(sel_a, 1);
-	gpio_direction_output(sel_b, 1);
-	gpio_direction_output(sel_c, 1);
-
-	da850_evm_ui_keys_init(gpio);
-	ret = platform_device_register(&da850_evm_ui_keys_device);
-	if (ret) {
-		pr_warn("Could not register UI GPIO expander push-buttons");
-		goto exp_setup_keys_fail;
-	}
-
-	pr_info("DA850/OMAP-L138 EVM UI card detected\n");
-
-	da850_evm_setup_nor_nand();
-
-	da850_evm_setup_emac_rmii(sel_a);
-
-	da850_evm_setup_video_port(sel_c);
-
-	return 0;
-
-exp_setup_keys_fail:
-	gpio_free(sel_c);
-exp_setup_selc_fail:
-	gpio_free(sel_b);
-exp_setup_selb_fail:
-	gpio_free(sel_a);
-exp_setup_sela_fail:
-	return ret;
-}
-
-static int da850_evm_ui_expander_teardown(struct i2c_client *client,
-					unsigned gpio, unsigned ngpio, void *c)
-{
-	platform_device_unregister(&da850_evm_ui_keys_device);
-
-	/* deselect all functionalities */
-	gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_C, 1);
-	gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_B, 1);
-	gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_A, 1);
-
-	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_C);
-	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_B);
-	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_A);
-
-	return 0;
-}
-
-/* assign the baseboard expander's GPIOs after the UI board's */
-#define DA850_UI_EXPANDER_N_GPIOS ARRAY_SIZE(da850_evm_ui_exp)
-#define DA850_BB_EXPANDER_GPIO_BASE (DAVINCI_N_GPIO + DA850_UI_EXPANDER_N_GPIOS)
-
-enum da850_evm_bb_exp_pins {
-	DA850_EVM_BB_EXP_DEEP_SLEEP_EN = 0,
-	DA850_EVM_BB_EXP_SW_RST,
-	DA850_EVM_BB_EXP_TP_23,
-	DA850_EVM_BB_EXP_TP_22,
-	DA850_EVM_BB_EXP_TP_21,
-	DA850_EVM_BB_EXP_USER_PB1,
-	DA850_EVM_BB_EXP_USER_LED2,
-	DA850_EVM_BB_EXP_USER_LED1,
-	DA850_EVM_BB_EXP_USER_SW1,
-	DA850_EVM_BB_EXP_USER_SW2,
-	DA850_EVM_BB_EXP_USER_SW3,
-	DA850_EVM_BB_EXP_USER_SW4,
-	DA850_EVM_BB_EXP_USER_SW5,
-	DA850_EVM_BB_EXP_USER_SW6,
-	DA850_EVM_BB_EXP_USER_SW7,
-	DA850_EVM_BB_EXP_USER_SW8
-};
-
-static const char * const da850_evm_bb_exp[] = {
-	[DA850_EVM_BB_EXP_DEEP_SLEEP_EN]	= "deep_sleep_en",
-	[DA850_EVM_BB_EXP_SW_RST]		= "sw_rst",
-	[DA850_EVM_BB_EXP_TP_23]		= "tp_23",
-	[DA850_EVM_BB_EXP_TP_22]		= "tp_22",
-	[DA850_EVM_BB_EXP_TP_21]		= "tp_21",
-	[DA850_EVM_BB_EXP_USER_PB1]		= "user_pb1",
-	[DA850_EVM_BB_EXP_USER_LED2]		= "user_led2",
-	[DA850_EVM_BB_EXP_USER_LED1]		= "user_led1",
-	[DA850_EVM_BB_EXP_USER_SW1]		= "user_sw1",
-	[DA850_EVM_BB_EXP_USER_SW2]		= "user_sw2",
-	[DA850_EVM_BB_EXP_USER_SW3]		= "user_sw3",
-	[DA850_EVM_BB_EXP_USER_SW4]		= "user_sw4",
-	[DA850_EVM_BB_EXP_USER_SW5]		= "user_sw5",
-	[DA850_EVM_BB_EXP_USER_SW6]		= "user_sw6",
-	[DA850_EVM_BB_EXP_USER_SW7]		= "user_sw7",
-	[DA850_EVM_BB_EXP_USER_SW8]		= "user_sw8",
-};
-
-#define DA850_N_BB_USER_SW	8
-
-static struct gpio_keys_button da850_evm_bb_keys[] = {
-	[0] = {
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= DA850_KEYS_DEBOUNCE_MS,
-		.code			= KEY_PROG1,
-		.desc			= NULL, /* assigned at runtime */
-		.gpio			= -1, /* assigned at runtime */
-	},
-	[1 ... DA850_N_BB_USER_SW] = {
-		.type			= EV_SW,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= DA850_KEYS_DEBOUNCE_MS,
-		.code			= -1, /* assigned at runtime */
-		.desc			= NULL, /* assigned at runtime */
-		.gpio			= -1, /* assigned at runtime */
-	},
-};
-
-static struct gpio_keys_platform_data da850_evm_bb_keys_pdata = {
-	.buttons = da850_evm_bb_keys,
-	.nbuttons = ARRAY_SIZE(da850_evm_bb_keys),
-	.poll_interval = DA850_GPIO_KEYS_POLL_MS,
-};
-
-static struct platform_device da850_evm_bb_keys_device = {
-	.name = "gpio-keys-polled",
-	.id = 1,
-	.dev = {
-		.platform_data = &da850_evm_bb_keys_pdata
-	},
-};
-
-static void da850_evm_bb_keys_init(unsigned gpio)
-{
-	int i;
-	struct gpio_keys_button *button;
-
-	button = &da850_evm_bb_keys[0];
-	button->desc = da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_PB1];
-	button->gpio = gpio + DA850_EVM_BB_EXP_USER_PB1;
-
-	for (i = 0; i < DA850_N_BB_USER_SW; i++) {
-		button = &da850_evm_bb_keys[i + 1];
-		button->code = SW_LID + i;
-		button->desc = da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_SW1 + i];
-		button->gpio = gpio + DA850_EVM_BB_EXP_USER_SW1 + i;
-	}
-}
-
-static struct gpio_led da850_evm_bb_leds[] = {
-	{
-		.name = "user_led2",
-	},
-	{
-		.name = "user_led1",
-	},
-};
-
-static struct gpio_led_platform_data da850_evm_bb_leds_pdata = {
-	.leds = da850_evm_bb_leds,
-	.num_leds = ARRAY_SIZE(da850_evm_bb_leds),
-};
-
-static struct gpiod_lookup_table da850_evm_bb_leds_gpio_table = {
-	.dev_id = "leds-gpio",
-	.table = {
-		GPIO_LOOKUP_IDX("i2c-bb-expander",
-				DA850_EVM_BB_EXP_USER_LED2, NULL,
-				0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("i2c-bb-expander",
-				DA850_EVM_BB_EXP_USER_LED2 + 1, NULL,
-				1, GPIO_ACTIVE_LOW),
-
-		{ },
-	},
-};
-
-static struct platform_device da850_evm_bb_leds_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev = {
-		.platform_data = &da850_evm_bb_leds_pdata
-	}
-};
-
-static int da850_evm_bb_expander_setup(struct i2c_client *client,
-						unsigned gpio, unsigned ngpio,
-						void *c)
-{
-	int ret;
-
-	/*
-	 * Register the switches and pushbutton on the baseboard as a gpio-keys
-	 * device.
-	 */
-	da850_evm_bb_keys_init(gpio);
-	ret = platform_device_register(&da850_evm_bb_keys_device);
-	if (ret) {
-		pr_warn("Could not register baseboard GPIO expander keys");
-		goto io_exp_setup_sw_fail;
-	}
-
-	gpiod_add_lookup_table(&da850_evm_bb_leds_gpio_table);
-	ret = platform_device_register(&da850_evm_bb_leds_device);
-	if (ret) {
-		pr_warn("Could not register baseboard GPIO expander LEDs");
-		goto io_exp_setup_leds_fail;
-	}
-
-	return 0;
-
-io_exp_setup_leds_fail:
-	platform_device_unregister(&da850_evm_bb_keys_device);
-io_exp_setup_sw_fail:
-	return ret;
-}
-
-static int da850_evm_bb_expander_teardown(struct i2c_client *client,
-					unsigned gpio, unsigned ngpio, void *c)
-{
-	platform_device_unregister(&da850_evm_bb_leds_device);
-	platform_device_unregister(&da850_evm_bb_keys_device);
-
-	return 0;
-}
-
-static struct pca953x_platform_data da850_evm_ui_expander_info = {
-	.gpio_base	= DAVINCI_N_GPIO,
-	.setup		= da850_evm_ui_expander_setup,
-	.teardown	= da850_evm_ui_expander_teardown,
-	.names		= da850_evm_ui_exp,
-};
-
-static struct pca953x_platform_data da850_evm_bb_expander_info = {
-	.gpio_base	= DA850_BB_EXPANDER_GPIO_BASE,
-	.setup		= da850_evm_bb_expander_setup,
-	.teardown	= da850_evm_bb_expander_teardown,
-	.names		= da850_evm_bb_exp,
-};
-
-static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	},
-	{
-		I2C_BOARD_INFO("tca6416", 0x20),
-		.dev_name = "ui-expander",
-		.platform_data = &da850_evm_ui_expander_info,
-	},
-	{
-		I2C_BOARD_INFO("tca6416", 0x21),
-		.dev_name = "bb-expander",
-		.platform_data = &da850_evm_bb_expander_info,
-	},
-};
-
-static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
-	.bus_freq	= 100,	/* kHz */
-	.bus_delay	= 0,	/* usec */
-};
-
-/* davinci da850 evm audio machine driver */
-static u8 da850_iis_serializer_direction[] = {
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	TX_MODE,
-	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-};
-
-static struct snd_platform_data da850_evm_snd_data = {
-	.tx_dma_offset		= 0x2000,
-	.rx_dma_offset		= 0x2000,
-	.op_mode		= DAVINCI_MCASP_IIS_MODE,
-	.num_serializer		= ARRAY_SIZE(da850_iis_serializer_direction),
-	.tdm_slots		= 2,
-	.serial_dir		= da850_iis_serializer_direction,
-	.asp_chan_q		= EVENTQ_0,
-	.ram_chan_q		= EVENTQ_1,
-	.version		= MCASP_VERSION_2,
-	.txnumevt		= 1,
-	.rxnumevt		= 1,
-	.sram_size_playback	= SZ_8K,
-	.sram_size_capture	= SZ_8K,
-};
-
-static const short da850_evm_mcasp_pins[] __initconst = {
-	DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
-	DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE,
-	DA850_AXR_11, DA850_AXR_12,
-	-1
-};
-
-#define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
-#define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
-
-static struct gpiod_lookup_table mmc_gpios_table = {
-	.dev_id = "da830-mmc.0",
-	.table = {
-		/* gpio chip 2 contains gpio range 64-95 */
-		GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_CD_PIN, "cd",
-			    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp",
-			    GPIO_ACTIVE_HIGH),
-		{ }
-	},
-};
-
-static struct davinci_mmc_config da850_mmc_config = {
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static const short da850_evm_mmcsd0_pins[] __initconst = {
-	DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
-	DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
-	DA850_GPIO4_0, DA850_GPIO4_1,
-	-1
-};
-
-static struct property_entry da850_lcd_backlight_props[] = {
-	PROPERTY_ENTRY_BOOL("default-on"),
-	{ }
-};
-
-static struct gpiod_lookup_table da850_lcd_backlight_gpio_table = {
-	.dev_id		= "gpio-backlight",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_LCD_BL_PIN, NULL, 0),
-		{ }
-	},
-};
-
-static const struct platform_device_info da850_lcd_backlight_info = {
-	.name		= "gpio-backlight",
-	.id		= PLATFORM_DEVID_NONE,
-	.properties	= da850_lcd_backlight_props,
-};
-
-static struct regulator_consumer_supply da850_lcd_supplies[] = {
-	REGULATOR_SUPPLY("lcd", NULL),
-};
-
-static struct regulator_init_data da850_lcd_supply_data = {
-	.consumer_supplies	= da850_lcd_supplies,
-	.num_consumer_supplies	= ARRAY_SIZE(da850_lcd_supplies),
-	.constraints    = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config da850_lcd_supply = {
-	.supply_name		= "lcd",
-	.microvolts		= 33000000,
-	.init_data		= &da850_lcd_supply_data,
-};
-
-static struct platform_device da850_lcd_supply_device = {
-	.name			= "reg-fixed-voltage",
-	.id			= 1, /* Dummy fixed regulator is 0 */
-	.dev			= {
-		.platform_data = &da850_lcd_supply,
-	},
-};
-
-static struct gpiod_lookup_table da850_lcd_supply_gpio_table = {
-	.dev_id			= "reg-fixed-voltage.1",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_LCD_PWR_PIN, NULL, 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table *da850_lcd_gpio_lookups[] = {
-	&da850_lcd_backlight_gpio_table,
-	&da850_lcd_supply_gpio_table,
-};
-
-static int da850_lcd_hw_init(void)
-{
-	struct platform_device *backlight;
-	int status;
-
-	gpiod_add_lookup_tables(da850_lcd_gpio_lookups,
-				ARRAY_SIZE(da850_lcd_gpio_lookups));
-
-	backlight = platform_device_register_full(&da850_lcd_backlight_info);
-	if (IS_ERR(backlight))
-		return PTR_ERR(backlight);
-
-	status = platform_device_register(&da850_lcd_supply_device);
-	if (status)
-		return status;
-
-	return 0;
-}
-
-/* Fixed regulator support */
-static struct regulator_consumer_supply fixed_supplies[] = {
-	/* Baseboard 3.3V: 5V -> TPS73701DCQ -> 3.3V */
-	REGULATOR_SUPPLY("AVDD", "1-0018"),
-	REGULATOR_SUPPLY("DRVDD", "1-0018"),
-
-	/* Baseboard 1.8V: 5V -> TPS73701DCQ -> 1.8V */
-	REGULATOR_SUPPLY("DVDD", "1-0018"),
-
-	/* UI card 3.3V: 5V -> TPS73701DCQ -> 3.3V */
-	REGULATOR_SUPPLY("vcc", "1-0020"),
-};
-
-/* TPS65070 voltage regulator support */
-
-/* 3.3V */
-static struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
-	{
-		.supply = "usb0_vdda33",
-	},
-	{
-		.supply = "usb1_vdda33",
-	},
-};
-
-/* 3.3V or 1.8V */
-static struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
-	{
-		.supply = "dvdd3318_a",
-	},
-	{
-		.supply = "dvdd3318_b",
-	},
-	{
-		.supply = "dvdd3318_c",
-	},
-	REGULATOR_SUPPLY("IOVDD", "1-0018"),
-};
-
-/* 1.2V */
-static struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
-	{
-		.supply = "cvdd",
-	},
-};
-
-/* 1.8V LDO */
-static struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
-	{
-		.supply = "sata_vddr",
-	},
-	{
-		.supply = "usb0_vdda18",
-	},
-	{
-		.supply = "usb1_vdda18",
-	},
-	{
-		.supply = "ddr_dvdd18",
-	},
-};
-
-/* 1.2V LDO */
-static struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
-	{
-		.supply = "sata_vdd",
-	},
-	{
-		.supply = "pll0_vdda",
-	},
-	{
-		.supply = "pll1_vdda",
-	},
-	{
-		.supply = "usbs_cvdd",
-	},
-	{
-		.supply = "vddarnwa1",
-	},
-};
-
-/* We take advantage of the fact that both defdcdc{2,3} are tied high */
-static struct tps6507x_reg_platform_data tps6507x_platform_data = {
-	.defdcdc_default = true,
-};
-
-static struct regulator_init_data tps65070_regulator_data[] = {
-	/* dcdc1 */
-	{
-		.constraints = {
-			.min_uV = 3150000,
-			.max_uV = 3450000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers),
-		.consumer_supplies = tps65070_dcdc1_consumers,
-	},
-
-	/* dcdc2 */
-	{
-		.constraints = {
-			.min_uV = 1710000,
-			.max_uV = 3450000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-			.always_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
-		.consumer_supplies = tps65070_dcdc2_consumers,
-		.driver_data = &tps6507x_platform_data,
-	},
-
-	/* dcdc3 */
-	{
-		.constraints = {
-			.min_uV = 950000,
-			.max_uV = 1350000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
-		.consumer_supplies = tps65070_dcdc3_consumers,
-		.driver_data = &tps6507x_platform_data,
-	},
-
-	/* ldo1 */
-	{
-		.constraints = {
-			.min_uV = 1710000,
-			.max_uV = 1890000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers),
-		.consumer_supplies = tps65070_ldo1_consumers,
-	},
-
-	/* ldo2 */
-	{
-		.constraints = {
-			.min_uV = 1140000,
-			.max_uV = 1320000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers),
-		.consumer_supplies = tps65070_ldo2_consumers,
-	},
-};
-
-static struct touchscreen_init_data tps6507x_touchscreen_data = {
-	.poll_period =  30,	/* ms between touch samples */
-	.min_pressure = 0x30,	/* minimum pressure to trigger touch */
-	.vendor = 0,		/* /sys/class/input/input?/id/vendor */
-	.product = 65070,	/* /sys/class/input/input?/id/product */
-	.version = 0x100,	/* /sys/class/input/input?/id/version */
-};
-
-static struct tps6507x_board tps_board = {
-	.tps6507x_pmic_init_data = &tps65070_regulator_data[0],
-	.tps6507x_ts_init_data = &tps6507x_touchscreen_data,
-};
-
-static struct i2c_board_info __initdata da850_evm_tps65070_info[] = {
-	{
-		I2C_BOARD_INFO("tps6507x", 0x48),
-		.platform_data = &tps_board,
-	},
-};
-
-static int __init pmic_tps65070_init(void)
-{
-	return i2c_register_board_info(1, da850_evm_tps65070_info,
-					ARRAY_SIZE(da850_evm_tps65070_info));
-}
-
-static const short da850_evm_lcdc_pins[] = {
-	DA850_GPIO2_8, DA850_GPIO2_15,
-	-1
-};
-
-static const short da850_evm_mii_pins[] = {
-	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
-	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
-	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
-	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static const short da850_evm_rmii_pins[] = {
-	DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
-	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
-	DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static struct gpiod_hog da850_evm_emac_gpio_hogs[] = {
-	{
-		.chip_label	= "davinci_gpio",
-		.chip_hwnum	= DA850_MII_MDIO_CLKEN_PIN,
-		.line_name	= "mdio_clk_en",
-		.lflags		= 0,
-		/* dflags set in da850_evm_config_emac() */
-	},
-	{ }
-};
-
-static int __init da850_evm_config_emac(void)
-{
-	void __iomem *cfg_chip3_base;
-	int ret;
-	u32 val;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	u8 rmii_en;
-
-	if (!machine_is_davinci_da850_evm())
-		return 0;
-
-	rmii_en = soc_info->emac_pdata->rmii_en;
-
-	cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
-
-	val = __raw_readl(cfg_chip3_base);
-
-	if (rmii_en) {
-		val |= BIT(8);
-		ret = davinci_cfg_reg_list(da850_evm_rmii_pins);
-		pr_info("EMAC: RMII PHY configured, MII PHY will not be"
-							" functional\n");
-	} else {
-		val &= ~BIT(8);
-		ret = davinci_cfg_reg_list(da850_evm_mii_pins);
-		pr_info("EMAC: MII PHY configured, RMII PHY will not be"
-							" functional\n");
-	}
-
-	if (ret)
-		pr_warn("%s: CPGMAC/RMII mux setup failed: %d\n",
-			__func__, ret);
-
-	/* configure the CFGCHIP3 register for RMII or MII */
-	__raw_writel(val, cfg_chip3_base);
-
-	ret = davinci_cfg_reg(DA850_GPIO2_6);
-	if (ret)
-		pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__);
-
-	da850_evm_emac_gpio_hogs[0].dflags = rmii_en ? GPIOD_OUT_HIGH
-						     : GPIOD_OUT_LOW;
-	gpiod_add_hogs(da850_evm_emac_gpio_hogs);
-
-	soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID;
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
-
-	return 0;
-}
-device_initcall(da850_evm_config_emac);
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM, hence
- * they are being reserved for codecs on the DSP side.
- */
-static const s16 da850_dma0_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma0_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30, 50},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30, 90},
-	{-1, -1}
-};
-
-static struct edma_rsv_info da850_edma_cc0_rsv = {
-	.rsv_chans	= da850_dma0_rsv_chans,
-	.rsv_slots	= da850_dma0_rsv_slots,
-};
-
-static struct edma_rsv_info da850_edma_cc1_rsv = {
-	.rsv_chans	= da850_dma1_rsv_chans,
-	.rsv_slots	= da850_dma1_rsv_slots,
-};
-
-static struct edma_rsv_info *da850_edma_rsv[2] = {
-	&da850_edma_cc0_rsv,
-	&da850_edma_cc1_rsv,
-};
-
-#ifdef CONFIG_CPU_FREQ
-static __init int da850_evm_init_cpufreq(void)
-{
-	switch (system_rev & 0xF) {
-	case 3:
-		da850_max_speed = 456000;
-		break;
-	case 2:
-		da850_max_speed = 408000;
-		break;
-	case 1:
-		da850_max_speed = 372000;
-		break;
-	}
-
-	return da850_register_cpufreq("pll0_sysclk3");
-}
-#else
-static __init int da850_evm_init_cpufreq(void) { return 0; }
-#endif
-
-#if defined(CONFIG_DA850_UI_SD_VIDEO_PORT)
-
-#define TVP5147_CH0		"tvp514x-0"
-#define TVP5147_CH1		"tvp514x-1"
-
-/* VPIF capture configuration */
-static struct tvp514x_platform_data tvp5146_pdata = {
-		.clk_polarity = 0,
-		.hs_polarity  = 1,
-		.vs_polarity  = 1,
-};
-
-#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
-
-static struct vpif_input da850_ch0_inputs[] = {
-	{
-		.input = {
-			.index = 0,
-			.name  = "Composite",
-			.type  = V4L2_INPUT_TYPE_CAMERA,
-			.capabilities = V4L2_IN_CAP_STD,
-			.std   = TVP514X_STD_ALL,
-		},
-		.input_route = INPUT_CVBS_VI2B,
-		.output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-		.subdev_name = TVP5147_CH0,
-	},
-};
-
-static struct vpif_input da850_ch1_inputs[] = {
-	{
-		.input = {
-			.index = 0,
-			.name  = "S-Video",
-			.type  = V4L2_INPUT_TYPE_CAMERA,
-			.capabilities = V4L2_IN_CAP_STD,
-			.std   = TVP514X_STD_ALL,
-		},
-		.input_route = INPUT_SVIDEO_VI2C_VI1C,
-		.output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-		.subdev_name = TVP5147_CH1,
-	},
-};
-
-static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = {
-	{
-		.name = TVP5147_CH0,
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &tvp5146_pdata,
-		},
-	},
-	{
-		.name = TVP5147_CH1,
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5c),
-			.platform_data = &tvp5146_pdata,
-		},
-	},
-};
-
-static struct vpif_capture_config da850_vpif_capture_config = {
-	.subdev_info = da850_vpif_capture_sdev_info,
-	.subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info),
-	.i2c_adapter_id = 1,
-	.chan_config[0] = {
-		.inputs = da850_ch0_inputs,
-		.input_count = ARRAY_SIZE(da850_ch0_inputs),
-		.vpif_if = {
-			.if_type = VPIF_IF_BT656,
-			.hd_pol  = 1,
-			.vd_pol  = 1,
-			.fid_pol = 0,
-		},
-	},
-	.chan_config[1] = {
-		.inputs = da850_ch1_inputs,
-		.input_count = ARRAY_SIZE(da850_ch1_inputs),
-		.vpif_if = {
-			.if_type = VPIF_IF_BT656,
-			.hd_pol  = 1,
-			.vd_pol  = 1,
-			.fid_pol = 0,
-		},
-	},
-	.card_name = "DA850/OMAP-L138 Video Capture",
-};
-
-/* VPIF display configuration */
-
-static struct adv7343_platform_data adv7343_pdata = {
-	.mode_config = {
-		.dac = { 1, 1, 1 },
-	},
-	.sd_config = {
-		.sd_dac_out = { 1 },
-	},
-};
-
-static struct vpif_subdev_info da850_vpif_subdev[] = {
-	{
-		.name = "adv7343",
-		.board_info = {
-			I2C_BOARD_INFO("adv7343", 0x2a),
-			.platform_data = &adv7343_pdata,
-		},
-	},
-};
-
-static const struct vpif_output da850_ch0_outputs[] = {
-	{
-		.output = {
-			.index = 0,
-			.name = "Composite",
-			.type = V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities = V4L2_OUT_CAP_STD,
-			.std = V4L2_STD_ALL,
-		},
-		.subdev_name = "adv7343",
-		.output_route = ADV7343_COMPOSITE_ID,
-	},
-	{
-		.output = {
-			.index = 1,
-			.name = "S-Video",
-			.type = V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities = V4L2_OUT_CAP_STD,
-			.std = V4L2_STD_ALL,
-		},
-		.subdev_name = "adv7343",
-		.output_route = ADV7343_SVIDEO_ID,
-	},
-};
-
-static struct vpif_display_config da850_vpif_display_config = {
-	.subdevinfo   = da850_vpif_subdev,
-	.subdev_count = ARRAY_SIZE(da850_vpif_subdev),
-	.chan_config[0] = {
-		.outputs = da850_ch0_outputs,
-		.output_count = ARRAY_SIZE(da850_ch0_outputs),
-	},
-	.card_name    = "DA850/OMAP-L138 Video Display",
-	.i2c_adapter_id = 1,
-};
-
-static __init void da850_vpif_init(void)
-{
-	int ret;
-
-	ret = da850_register_vpif();
-	if (ret)
-		pr_warn("da850_evm_init: VPIF setup failed: %d\n", ret);
-
-	ret = davinci_cfg_reg_list(da850_vpif_capture_pins);
-	if (ret)
-		pr_warn("da850_evm_init: VPIF capture mux setup failed: %d\n",
-			ret);
-
-	ret = da850_register_vpif_capture(&da850_vpif_capture_config);
-	if (ret)
-		pr_warn("da850_evm_init: VPIF capture setup failed: %d\n", ret);
-
-	ret = davinci_cfg_reg_list(da850_vpif_display_pins);
-	if (ret)
-		pr_warn("da850_evm_init: VPIF display mux setup failed: %d\n",
-			ret);
-
-	ret = da850_register_vpif_display(&da850_vpif_display_config);
-	if (ret)
-		pr_warn("da850_evm_init: VPIF display setup failed: %d\n", ret);
-}
-
-#else
-static __init void da850_vpif_init(void) {}
-#endif
-
-#define DA850EVM_SATA_REFCLKPN_RATE	(100 * 1000 * 1000)
-
-static __init void da850_evm_init(void)
-{
-	int ret;
-
-	da850_register_clocks();
-
-	ret = da850_register_gpio();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	regulator_register_fixed(0, fixed_supplies, ARRAY_SIZE(fixed_supplies));
-
-	ret = pmic_tps65070_init();
-	if (ret)
-		pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);
-
-	ret = da850_register_edma(da850_edma_rsv);
-	if (ret)
-		pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
-
-	ret = davinci_cfg_reg_list(da850_i2c0_pins);
-	if (ret)
-		pr_warn("%s: I2C0 mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
-	if (ret)
-		pr_warn("%s: I2C0 registration failed: %d\n", __func__, ret);
-
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warn("%s: watchdog registration failed: %d\n",
-			__func__, ret);
-
-	if (HAS_MMC) {
-		ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins);
-		if (ret)
-			pr_warn("%s: MMCSD0 mux setup failed: %d\n",
-				__func__, ret);
-
-		gpiod_add_lookup_table(&mmc_gpios_table);
-
-		ret = da8xx_register_mmcsd0(&da850_mmc_config);
-		if (ret)
-			pr_warn("%s: MMCSD0 registration failed: %d\n",
-				__func__, ret);
-	}
-
-	davinci_serial_init(da8xx_serial_device);
-
-	nvmem_add_cell_table(&da850evm_nvmem_cell_table);
-	nvmem_add_cell_lookups(&da850evm_nvmem_cell_lookup, 1);
-
-	i2c_register_board_info(1, da850_evm_i2c_devices,
-			ARRAY_SIZE(da850_evm_i2c_devices));
-
-	/*
-	 * shut down uart 0 and 1; they are not used on the board and
-	 * accessing them causes endless "too much work in irq53" messages
-	 * with arago fs
-	 */
-	__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
-	__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
-
-	ret = davinci_cfg_reg_list(da850_evm_mcasp_pins);
-	if (ret)
-		pr_warn("%s: McASP mux setup failed: %d\n", __func__, ret);
-
-	da850_evm_snd_data.sram_pool = sram_get_gen_pool();
-	da8xx_register_mcasp(0, &da850_evm_snd_data);
-
-	ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
-	if (ret)
-		pr_warn("%s: LCDC mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_uio_pruss();
-	if (ret)
-		pr_warn("da850_evm_init: pruss initialization failed: %d\n",
-				ret);
-
-	/* Handle board specific muxing for LCD here */
-	ret = davinci_cfg_reg_list(da850_evm_lcdc_pins);
-	if (ret)
-		pr_warn("%s: EVM specific LCD mux setup failed: %d\n",
-			__func__, ret);
-
-	ret = da850_lcd_hw_init();
-	if (ret)
-		pr_warn("%s: LCD initialization failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
-	if (ret)
-		pr_warn("%s: LCDC registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_rtc();
-	if (ret)
-		pr_warn("%s: RTC setup failed: %d\n", __func__, ret);
-
-	ret = da850_evm_init_cpufreq();
-	if (ret)
-		pr_warn("%s: cpufreq registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_cpuidle();
-	if (ret)
-		pr_warn("%s: cpuidle registration failed: %d\n", __func__, ret);
-
-	davinci_pm_init();
-	da850_vpif_init();
-
-	ret = spi_register_board_info(da850evm_spi_info,
-				      ARRAY_SIZE(da850evm_spi_info));
-	if (ret)
-		pr_warn("%s: spi info registration failed: %d\n", __func__,
-			ret);
-
-	ret = da8xx_register_spi_bus(1, ARRAY_SIZE(da850evm_spi_info));
-	if (ret)
-		pr_warn("%s: SPI 1 registration failed: %d\n", __func__, ret);
-
-	ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE);
-	if (ret)
-		pr_warn("%s: SATA registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_rproc();
-	if (ret)
-		pr_warn("%s: dsp/rproc registration failed: %d\n",
-			__func__, ret);
-
-	regulator_has_full_constraints();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init da850_evm_console_init(void)
-{
-	if (!machine_is_davinci_da850_evm())
-		return 0;
-
-	return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(da850_evm_console_init);
-#endif
-
-static void __init da850_evm_map_io(void)
-{
-	da850_init();
-}
-
-MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
-	.atag_offset	= 0x100,
-	.map_io		= da850_evm_map_io,
-	.init_irq	= da850_init_irq,
-	.init_time	= da850_init_time,
-	.init_machine	= da850_evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-	.reserve	= da8xx_rproc_reserve_cma,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
deleted file mode 100644
index b48ab1c3e48b..000000000000
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ /dev/null
@@ -1,444 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DaVinci EVM board support
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) MontaVista Software, Inc.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/clk.h>
-#include <linux/dm9000.h>
-#include <linux/videodev2.h>
-#include <media/i2c/tvp514x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "serial.h"
-#include "common.h"
-#include "davinci.h"
-
-/* NOTE:  this is geared for the standard config, with a socketed
- * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
- * swap chips, maybe with a different block size, partitioning may
- * need to be changed.
- */
-#define NAND_BLOCK_SIZE		SZ_128K
-
-static struct mtd_partition davinci_nand_partitions[] = {
-	{
-		/* UBL (a few copies) plus U-Boot */
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 15 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		/* U-Boot environment */
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * NAND_BLOCK_SIZE,
-		.mask_flags	= 0,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem1",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem2",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* two blocks with bad block table (and mirror) at the end */
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
-	.core_chipsel		= 0,
-	.mask_chipsel		= BIT(14),
-	.parts			= davinci_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.bbt_options		= NAND_BBT_USE_FLASH,
-	.ecc_bits		= 4,
-};
-
-static struct resource davinci_nand_resources[] = {
-	{
-		.start		= DM355_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM355_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_nand_device = {
-	.name			= "davinci_nand",
-	.id			= 0,
-
-	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
-	.resource		= davinci_nand_resources,
-
-	.dev			= {
-		.platform_data	= &davinci_nand_data,
-	},
-};
-
-#define DM355_I2C_SDA_PIN	GPIO_TO_PIN(0, 15)
-#define DM355_I2C_SCL_PIN	GPIO_TO_PIN(0, 14)
-
-static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
-	.dev_id = "i2c_davinci.1",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DM355_I2C_SDA_PIN, "sda",
-			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl",
-			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		{ }
-	},
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 400	/* kHz */,
-	.bus_delay	= 0	/* usec */,
-	.gpio_recovery	= true,
-};
-
-static int dm355evm_mmc_gpios = -EINVAL;
-
-static void dm355evm_mmcsd_gpios(unsigned gpio)
-{
-	gpio_request(gpio + 0, "mmc0_ro");
-	gpio_request(gpio + 1, "mmc0_cd");
-	gpio_request(gpio + 2, "mmc1_ro");
-	gpio_request(gpio + 3, "mmc1_cd");
-
-	/* we "know" these are input-only so we don't
-	 * need to call gpio_direction_input()
-	 */
-
-	dm355evm_mmc_gpios = gpio;
-}
-
-static struct i2c_board_info dm355evm_i2c_info[] = {
-	{	I2C_BOARD_INFO("dm355evm_msp", 0x25),
-		.platform_data = dm355evm_mmcsd_gpios,
-	},
-	/* { plus irq  }, */
-	{ I2C_BOARD_INFO("tlv320aic33", 0x1b), },
-};
-
-static void __init evm_init_i2c(void)
-{
-	gpiod_add_lookup_table(&i2c_recovery_gpiod_table);
-	davinci_init_i2c(&i2c_pdata);
-
-	gpio_request(5, "dm355evm_msp");
-	gpio_direction_input(5);
-	dm355evm_i2c_info[0].irq = gpio_to_irq(5);
-
-	i2c_register_board_info(1, dm355evm_i2c_info,
-			ARRAY_SIZE(dm355evm_i2c_info));
-}
-
-static struct resource dm355evm_dm9000_rsrc[] = {
-	{
-		/* addr */
-		.start	= 0x04014000,
-		.end	= 0x04014001,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		/* data */
-		.start	= 0x04014002,
-		.end	= 0x04014003,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_IRQ
-			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
-	},
-};
-
-static struct dm9000_plat_data dm335evm_dm9000_platdata;
-
-static struct platform_device dm355evm_dm9000 = {
-	.name		= "dm9000",
-	.id		= -1,
-	.resource	= dm355evm_dm9000_rsrc,
-	.num_resources	= ARRAY_SIZE(dm355evm_dm9000_rsrc),
-	.dev		= {
-		.platform_data = &dm335evm_dm9000_platdata,
-	},
-};
-
-static struct tvp514x_platform_data tvp5146_pdata = {
-	.clk_polarity = 0,
-	.hs_polarity = 1,
-	.vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-/* Inputs available at the TVP5146 */
-static struct v4l2_input tvp5146_inputs[] = {
-	{
-		.index = 0,
-		.name = "Composite",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-	{
-		.index = 1,
-		.name = "S-Video",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-};
-
-/*
- * this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
- * with tvp5146_inputs
- */
-static struct vpfe_route tvp5146_routes[] = {
-	{
-		.input = INPUT_CVBS_VI2B,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-	{
-		.input = INPUT_SVIDEO_VI2C_VI1C,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-};
-
-static struct vpfe_subdev_info vpfe_sub_devs[] = {
-	{
-		.name = "tvp5146",
-		.grp_id = 0,
-		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
-		.inputs = tvp5146_inputs,
-		.routes = tvp5146_routes,
-		.can_route = 1,
-		.ccdc_if_params = {
-			.if_type = VPFE_BT656,
-			.hdpol = VPFE_PINPOL_POSITIVE,
-			.vdpol = VPFE_PINPOL_POSITIVE,
-		},
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &tvp5146_pdata,
-		},
-	}
-};
-
-static struct vpfe_config vpfe_cfg = {
-	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
-	.i2c_adapter_id = 1,
-	.sub_devs = vpfe_sub_devs,
-	.card_name = "DM355 EVM",
-	.ccdc = "DM355 CCDC",
-};
-
-/* venc standards timings */
-static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = {
-	{
-		.name		= "ntsc",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_NTSC,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 480,
-		.aspect		= {11, 10},
-		.fps		= {30000, 1001},
-		.left_margin	= 0x79,
-		.upper_margin	= 0x10,
-	},
-	{
-		.name		= "pal",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_PAL,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 576,
-		.aspect		= {54, 59},
-		.fps		= {25, 1},
-		.left_margin	= 0x7E,
-		.upper_margin	= 0x16
-	},
-};
-
-#define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-
-/*
- * The outputs available from VPBE + ecnoders. Keep the
- * the order same as that of encoders. First those from venc followed by that
- * from encoders. Index in the output refers to index on a particular encoder.
- * Driver uses this index to pass it to encoder when it supports more than
- * one output. Application uses index of the array to set an output.
- */
-static struct vpbe_output dm355evm_vpbe_outputs[] = {
-	{
-		.output		= {
-			.index		= 0,
-			.name		= "Composite",
-			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.std		= VENC_STD_ALL,
-			.capabilities	= V4L2_OUT_CAP_STD,
-		},
-		.subdev_name	= DM355_VPBE_VENC_SUBDEV_NAME,
-		.default_mode	= "ntsc",
-		.num_modes	= ARRAY_SIZE(dm355evm_enc_preset_timing),
-		.modes		= dm355evm_enc_preset_timing,
-		.if_params	= MEDIA_BUS_FMT_FIXED,
-	},
-};
-
-static struct vpbe_config dm355evm_display_cfg = {
-	.module_name	= "dm355-vpbe-display",
-	.i2c_adapter_id	= 1,
-	.osd		= {
-		.module_name	= DM355_VPBE_OSD_SUBDEV_NAME,
-	},
-	.venc		= {
-		.module_name	= DM355_VPBE_VENC_SUBDEV_NAME,
-	},
-	.num_outputs	= ARRAY_SIZE(dm355evm_vpbe_outputs),
-	.outputs	= dm355evm_vpbe_outputs,
-};
-
-static struct platform_device *davinci_evm_devices[] __initdata = {
-	&dm355evm_dm9000,
-	&davinci_nand_device,
-};
-
-static void __init dm355_evm_map_io(void)
-{
-	dm355_init();
-}
-
-static int dm355evm_mmc_get_cd(int module)
-{
-	if (!gpio_is_valid(dm355evm_mmc_gpios))
-		return -ENXIO;
-	/* low == card present */
-	return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1);
-}
-
-static int dm355evm_mmc_get_ro(int module)
-{
-	if (!gpio_is_valid(dm355evm_mmc_gpios))
-		return -ENXIO;
-	/* high == card's write protect switch active */
-	return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0);
-}
-
-static struct davinci_mmc_config dm355evm_mmc_config = {
-	.get_cd		= dm355evm_mmc_get_cd,
-	.get_ro		= dm355evm_mmc_get_ro,
-	.wires		= 4,
-	.max_freq       = 50000000,
-	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-/* Don't connect anything to J10 unless you're only using USB host
- * mode *and* have to do so with some kind of gender-bender.  If
- * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
- * the ID pin won't need any help.
- */
-#define USB_ID_VALUE	1	/* ID pulled low */
-
-static struct spi_eeprom at25640a = {
-	.byte_len	= SZ_64K / 8,
-	.name		= "at25640a",
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static const struct spi_board_info dm355_evm_spi_info[] __initconst = {
-	{
-		.modalias	= "at25",
-		.platform_data	= &at25640a,
-		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static __init void dm355_evm_init(void)
-{
-	struct clk *aemif;
-	int ret;
-
-	dm355_register_clocks();
-
-	ret = dm355_gpio_register();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	gpio_request(1, "dm9000");
-	gpio_direction_input(1);
-	dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
-
-	aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
-	if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n"))
-		clk_prepare_enable(aemif);
-
-	platform_add_devices(davinci_evm_devices,
-			     ARRAY_SIZE(davinci_evm_devices));
-	evm_init_i2c();
-	davinci_serial_init(dm355_serial_device);
-
-	/* NOTE:  NAND flash timings set by the UBL are slower than
-	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
-	 * but could be 0x0400008c for about 25% faster page reads.
-	 */
-
-	gpio_request(2, "usb_id_toggle");
-	gpio_direction_output(2, USB_ID_VALUE);
-	/* irlml6401 switches over 1A in under 8 msec */
-	davinci_setup_usb(1000, 8);
-
-	davinci_setup_mmc(0, &dm355evm_mmc_config);
-	davinci_setup_mmc(1, &dm355evm_mmc_config);
-
-	dm355_init_video(&vpfe_cfg, &dm355evm_display_cfg);
-
-	dm355_init_spi0(BIT(0), dm355_evm_spi_info,
-			ARRAY_SIZE(dm355_evm_spi_info));
-
-	/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
-	dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN);
-}
-
-MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
-	.atag_offset  = 0x100,
-	.map_io	      = dm355_evm_map_io,
-	.init_irq     = dm355_init_irq,
-	.init_time	= dm355_init_time,
-	.init_machine = dm355_evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
deleted file mode 100644
index 32b9d607d025..000000000000
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ /dev/null
@@ -1,278 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * DM355 leopard board support
- *
- * Based on board-dm355-evm.c
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "serial.h"
-#include "davinci.h"
-
-/* NOTE:  this is geared for the standard config, with a socketed
- * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
- * swap chips, maybe with a different block size, partitioning may
- * need to be changed.
- */
-#define NAND_BLOCK_SIZE		SZ_128K
-
-static struct mtd_partition davinci_nand_partitions[] = {
-	{
-		/* UBL (a few copies) plus U-Boot */
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 15 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		/* U-Boot environment */
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * NAND_BLOCK_SIZE,
-		.mask_flags	= 0,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem1",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem2",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* two blocks with bad block table (and mirror) at the end */
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
-	.core_chipsel		= 0,
-	.mask_chipsel		= BIT(14),
-	.parts			= davinci_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_placement		= NAND_ECC_PLACEMENT_INTERLEAVED,
-	.ecc_bits		= 4,
-	.bbt_options		= NAND_BBT_USE_FLASH,
-};
-
-static struct resource davinci_nand_resources[] = {
-	{
-		.start		= DM355_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM355_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_nand_device = {
-	.name			= "davinci_nand",
-	.id			= 0,
-
-	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
-	.resource		= davinci_nand_resources,
-
-	.dev			= {
-		.platform_data	= &davinci_nand_data,
-	},
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 400	/* kHz */,
-	.bus_delay	= 0	/* usec */,
-};
-
-static int leopard_mmc_gpio = -EINVAL;
-
-static void dm355leopard_mmcsd_gpios(unsigned gpio)
-{
-	gpio_request(gpio + 0, "mmc0_ro");
-	gpio_request(gpio + 1, "mmc0_cd");
-	gpio_request(gpio + 2, "mmc1_ro");
-	gpio_request(gpio + 3, "mmc1_cd");
-
-	/* we "know" these are input-only so we don't
-	 * need to call gpio_direction_input()
-	 */
-
-	leopard_mmc_gpio = gpio;
-}
-
-static struct i2c_board_info dm355leopard_i2c_info[] = {
-	{ I2C_BOARD_INFO("dm355leopard_msp", 0x25),
-		.platform_data = dm355leopard_mmcsd_gpios,
-		/* plus irq */ },
-	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
-	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
-};
-
-static void __init leopard_init_i2c(void)
-{
-	davinci_init_i2c(&i2c_pdata);
-
-	gpio_request(5, "dm355leopard_msp");
-	gpio_direction_input(5);
-	dm355leopard_i2c_info[0].irq = gpio_to_irq(5);
-
-	i2c_register_board_info(1, dm355leopard_i2c_info,
-			ARRAY_SIZE(dm355leopard_i2c_info));
-}
-
-static struct resource dm355leopard_dm9000_rsrc[] = {
-	{
-		/* addr */
-		.start	= 0x04000000,
-		.end	= 0x04000001,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		/* data */
-		.start	= 0x04000016,
-		.end	= 0x04000017,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_IRQ
-			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
-	},
-};
-
-static struct platform_device dm355leopard_dm9000 = {
-	.name		= "dm9000",
-	.id		= -1,
-	.resource	= dm355leopard_dm9000_rsrc,
-	.num_resources	= ARRAY_SIZE(dm355leopard_dm9000_rsrc),
-};
-
-static struct platform_device *davinci_leopard_devices[] __initdata = {
-	&dm355leopard_dm9000,
-	&davinci_nand_device,
-};
-
-static void __init dm355_leopard_map_io(void)
-{
-	dm355_init();
-}
-
-static int dm355leopard_mmc_get_cd(int module)
-{
-	if (!gpio_is_valid(leopard_mmc_gpio))
-		return -ENXIO;
-	/* low == card present */
-	return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1);
-}
-
-static int dm355leopard_mmc_get_ro(int module)
-{
-	if (!gpio_is_valid(leopard_mmc_gpio))
-		return -ENXIO;
-	/* high == card's write protect switch active */
-	return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0);
-}
-
-static struct davinci_mmc_config dm355leopard_mmc_config = {
-	.get_cd		= dm355leopard_mmc_get_cd,
-	.get_ro		= dm355leopard_mmc_get_ro,
-	.wires		= 4,
-	.max_freq       = 50000000,
-	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-/* Don't connect anything to J10 unless you're only using USB host
- * mode *and* have to do so with some kind of gender-bender.  If
- * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
- * the ID pin won't need any help.
- */
-#define USB_ID_VALUE	1	/* ID pulled low */
-
-static struct spi_eeprom at25640a = {
-	.byte_len	= SZ_64K / 8,
-	.name		= "at25640a",
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static const struct spi_board_info dm355_leopard_spi_info[] __initconst = {
-	{
-		.modalias	= "at25",
-		.platform_data	= &at25640a,
-		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static __init void dm355_leopard_init(void)
-{
-	struct clk *aemif;
-	int ret;
-
-	dm355_register_clocks();
-
-	ret = dm355_gpio_register();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	gpio_request(9, "dm9000");
-	gpio_direction_input(9);
-	dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
-
-	aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
-	if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n"))
-		clk_prepare_enable(aemif);
-
-	platform_add_devices(davinci_leopard_devices,
-			     ARRAY_SIZE(davinci_leopard_devices));
-	leopard_init_i2c();
-	davinci_serial_init(dm355_serial_device);
-
-	/* NOTE:  NAND flash timings set by the UBL are slower than
-	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
-	 * but could be 0x0400008c for about 25% faster page reads.
-	 */
-
-	gpio_request(2, "usb_id_toggle");
-	gpio_direction_output(2, USB_ID_VALUE);
-	/* irlml6401 switches over 1A in under 8 msec */
-	davinci_setup_usb(1000, 8);
-
-	davinci_setup_mmc(0, &dm355leopard_mmc_config);
-	davinci_setup_mmc(1, &dm355leopard_mmc_config);
-
-	dm355_init_spi0(BIT(0), dm355_leopard_spi_info,
-			ARRAY_SIZE(dm355_leopard_spi_info));
-}
-
-MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
-	.atag_offset  = 0x100,
-	.map_io	      = dm355_leopard_map_io,
-	.init_irq     = dm355_init_irq,
-	.init_time	= dm355_init_time,
-	.init_machine = dm355_leopard_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
deleted file mode 100644
index d8c6c360818b..000000000000
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ /dev/null
@@ -1,855 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DaVinci DM365 EVM board support
- *
- * Copyright (C) 2009 Texas Instruments Incorporated
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/property.h>
-#include <linux/leds.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/slab.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/nvmem-provider.h>
-#include <linux/input.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/v4l2-dv-timings.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/keyscan-davinci.h>
-
-#include <media/i2c/ths7303.h>
-#include <media/i2c/tvp514x.h>
-
-#include "mux.h"
-#include "common.h"
-#include "serial.h"
-#include "davinci.h"
-
-static inline int have_imager(void)
-{
-	/* REVISIT when it's supported, trigger via Kconfig */
-	return 0;
-}
-
-static inline int have_tvp7002(void)
-{
-	/* REVISIT when it's supported, trigger via Kconfig */
-	return 0;
-}
-
-#define DM365_EVM_PHY_ID		"davinci_mdio-0:01"
-/*
- * A MAX-II CPLD is used for various board control functions.
- */
-#define CPLD_OFFSET(a13a8,a2a1)		(((a13a8) << 10) + ((a2a1) << 3))
-
-#define CPLD_VERSION	CPLD_OFFSET(0,0)	/* r/o */
-#define CPLD_TEST	CPLD_OFFSET(0,1)
-#define CPLD_LEDS	CPLD_OFFSET(0,2)
-#define CPLD_MUX	CPLD_OFFSET(0,3)
-#define CPLD_SWITCH	CPLD_OFFSET(1,0)	/* r/o */
-#define CPLD_POWER	CPLD_OFFSET(1,1)
-#define CPLD_VIDEO	CPLD_OFFSET(1,2)
-#define CPLD_CARDSTAT	CPLD_OFFSET(1,3)	/* r/o */
-
-#define CPLD_DILC_OUT	CPLD_OFFSET(2,0)
-#define CPLD_DILC_IN	CPLD_OFFSET(2,1)	/* r/o */
-
-#define CPLD_IMG_DIR0	CPLD_OFFSET(2,2)
-#define CPLD_IMG_MUX0	CPLD_OFFSET(2,3)
-#define CPLD_IMG_MUX1	CPLD_OFFSET(3,0)
-#define CPLD_IMG_DIR1	CPLD_OFFSET(3,1)
-#define CPLD_IMG_MUX2	CPLD_OFFSET(3,2)
-#define CPLD_IMG_MUX3	CPLD_OFFSET(3,3)
-#define CPLD_IMG_DIR2	CPLD_OFFSET(4,0)
-#define CPLD_IMG_MUX4	CPLD_OFFSET(4,1)
-#define CPLD_IMG_MUX5	CPLD_OFFSET(4,2)
-
-#define CPLD_RESETS	CPLD_OFFSET(4,3)
-
-#define CPLD_CCD_DIR1	CPLD_OFFSET(0x3e,0)
-#define CPLD_CCD_IO1	CPLD_OFFSET(0x3e,1)
-#define CPLD_CCD_DIR2	CPLD_OFFSET(0x3e,2)
-#define CPLD_CCD_IO2	CPLD_OFFSET(0x3e,3)
-#define CPLD_CCD_DIR3	CPLD_OFFSET(0x3f,0)
-#define CPLD_CCD_IO3	CPLD_OFFSET(0x3f,1)
-
-static void __iomem *cpld;
-
-
-/* NOTE:  this is geared for the standard config, with a socketed
- * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
- * swap chips with a different block size, partitioning will
- * need to be changed. This NAND chip MT29F16G08FAA is the default
- * NAND shipped with the Spectrum Digital DM365 EVM
- */
-#define NAND_BLOCK_SIZE		SZ_128K
-
-static struct mtd_partition davinci_nand_partitions[] = {
-	{
-		/* UBL (a few copies) plus U-Boot */
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 30 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		/* U-Boot environment */
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * NAND_BLOCK_SIZE,
-		.mask_flags	= 0,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem1",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem2",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* two blocks with bad block table (and mirror) at the end */
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
-	.core_chipsel		= 0,
-	.mask_chipsel		= BIT(14),
-	.parts			= davinci_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.bbt_options		= NAND_BBT_USE_FLASH,
-	.ecc_bits		= 4,
-};
-
-static struct resource davinci_nand_resources[] = {
-	{
-		.start		= DM365_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM365_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM365_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 0,
-		.num_resources	= ARRAY_SIZE(davinci_nand_resources),
-		.resource	= davinci_nand_resources,
-		.dev		= {
-			.platform_data	= &davinci_nand_data,
-		},
-	}
-};
-
-static struct resource davinci_aemif_resources[] = {
-	{
-		.start		= DM365_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct aemif_abus_data da850_evm_aemif_abus_data[] = {
-	{
-		.cs		= 1,
-	},
-};
-
-static struct aemif_platform_data davinci_aemif_pdata = {
-	.abus_data		= da850_evm_aemif_abus_data,
-	.num_abus_data		= ARRAY_SIZE(da850_evm_aemif_abus_data),
-	.sub_devices		= davinci_aemif_devices,
-	.num_sub_devices	= ARRAY_SIZE(davinci_aemif_devices),
-};
-
-static struct platform_device davinci_aemif_device = {
-	.name			= "ti-aemif",
-	.id			= -1,
-	.dev = {
-		.platform_data	= &davinci_aemif_pdata,
-	},
-	.resource		= davinci_aemif_resources,
-	.num_resources		= ARRAY_SIZE(davinci_aemif_resources),
-};
-
-static struct nvmem_cell_info davinci_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x7f00,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table davinci_nvmem_cell_table = {
-	.nvmem_name	= "1-00500",
-	.cells		= davinci_nvmem_cells,
-	.ncells		= ARRAY_SIZE(davinci_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup davinci_nvmem_cell_lookup = {
-	.nvmem_name	= "1-00500",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static const struct property_entry eeprom_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 64),
-	{ }
-};
-
-static const struct software_node eeprom_node = {
-	.properties = eeprom_properties,
-};
-
-static struct i2c_board_info i2c_info[] = {
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.swnode = &eeprom_node,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	},
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 400	/* kHz */,
-	.bus_delay	= 0	/* usec */,
-};
-
-/* Fixed regulator support */
-static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
-	/* Baseboard 3.3V: 5V -> TPS767D301 -> 3.3V */
-	REGULATOR_SUPPLY("AVDD", "1-0018"),
-	REGULATOR_SUPPLY("DRVDD", "1-0018"),
-	REGULATOR_SUPPLY("IOVDD", "1-0018"),
-};
-
-static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
-	/* Baseboard 1.8V: 5V -> TPS767D301 -> 1.8V */
-	REGULATOR_SUPPLY("DVDD", "1-0018"),
-};
-
-static int dm365evm_keyscan_enable(struct device *dev)
-{
-	return davinci_cfg_reg(DM365_KEYSCAN);
-}
-
-static unsigned short dm365evm_keymap[] = {
-	KEY_KP2,
-	KEY_LEFT,
-	KEY_EXIT,
-	KEY_DOWN,
-	KEY_ENTER,
-	KEY_UP,
-	KEY_KP1,
-	KEY_RIGHT,
-	KEY_MENU,
-	KEY_RECORD,
-	KEY_REWIND,
-	KEY_KPMINUS,
-	KEY_STOP,
-	KEY_FASTFORWARD,
-	KEY_KPPLUS,
-	KEY_PLAYPAUSE,
-	0
-};
-
-static struct davinci_ks_platform_data dm365evm_ks_data = {
-	.device_enable	= dm365evm_keyscan_enable,
-	.keymap		= dm365evm_keymap,
-	.keymapsize	= ARRAY_SIZE(dm365evm_keymap),
-	.rep		= 1,
-	/* Scan period = strobe + interval */
-	.strobe		= 0x5,
-	.interval	= 0x2,
-	.matrix_type	= DAVINCI_KEYSCAN_MATRIX_4X4,
-};
-
-static int cpld_mmc_get_cd(int module)
-{
-	if (!cpld)
-		return -ENXIO;
-
-	/* low == card present */
-	return !(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 4 : 0));
-}
-
-static int cpld_mmc_get_ro(int module)
-{
-	if (!cpld)
-		return -ENXIO;
-
-	/* high == card's write protect switch active */
-	return !!(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 5 : 1));
-}
-
-static struct davinci_mmc_config dm365evm_mmc_config = {
-	.get_cd		= cpld_mmc_get_cd,
-	.get_ro		= cpld_mmc_get_ro,
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static void dm365evm_emac_configure(void)
-{
-	/*
-	 * EMAC pins are multiplexed with GPIO and UART
-	 * Further details are available at the DM365 ARM
-	 * Subsystem Users Guide(sprufg5.pdf) pages 125 - 127
-	 */
-	davinci_cfg_reg(DM365_EMAC_TX_EN);
-	davinci_cfg_reg(DM365_EMAC_TX_CLK);
-	davinci_cfg_reg(DM365_EMAC_COL);
-	davinci_cfg_reg(DM365_EMAC_TXD3);
-	davinci_cfg_reg(DM365_EMAC_TXD2);
-	davinci_cfg_reg(DM365_EMAC_TXD1);
-	davinci_cfg_reg(DM365_EMAC_TXD0);
-	davinci_cfg_reg(DM365_EMAC_RXD3);
-	davinci_cfg_reg(DM365_EMAC_RXD2);
-	davinci_cfg_reg(DM365_EMAC_RXD1);
-	davinci_cfg_reg(DM365_EMAC_RXD0);
-	davinci_cfg_reg(DM365_EMAC_RX_CLK);
-	davinci_cfg_reg(DM365_EMAC_RX_DV);
-	davinci_cfg_reg(DM365_EMAC_RX_ER);
-	davinci_cfg_reg(DM365_EMAC_CRS);
-	davinci_cfg_reg(DM365_EMAC_MDIO);
-	davinci_cfg_reg(DM365_EMAC_MDCLK);
-
-	/*
-	 * EMAC interrupts are multiplexed with GPIO interrupts
-	 * Details are available at the DM365 ARM
-	 * Subsystem Users Guide(sprufg5.pdf) pages 133 - 134
-	 */
-	davinci_cfg_reg(DM365_INT_EMAC_RXTHRESH);
-	davinci_cfg_reg(DM365_INT_EMAC_RXPULSE);
-	davinci_cfg_reg(DM365_INT_EMAC_TXPULSE);
-	davinci_cfg_reg(DM365_INT_EMAC_MISCPULSE);
-}
-
-static void dm365evm_mmc_configure(void)
-{
-	/*
-	 * MMC/SD pins are multiplexed with GPIO and EMIF
-	 * Further details are available at the DM365 ARM
-	 * Subsystem Users Guide(sprufg5.pdf) pages 118, 128 - 131
-	 */
-	davinci_cfg_reg(DM365_SD1_CLK);
-	davinci_cfg_reg(DM365_SD1_CMD);
-	davinci_cfg_reg(DM365_SD1_DATA3);
-	davinci_cfg_reg(DM365_SD1_DATA2);
-	davinci_cfg_reg(DM365_SD1_DATA1);
-	davinci_cfg_reg(DM365_SD1_DATA0);
-}
-
-static struct tvp514x_platform_data tvp5146_pdata = {
-	.clk_polarity = 0,
-	.hs_polarity = 1,
-	.vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL        (V4L2_STD_NTSC | V4L2_STD_PAL)
-/* Inputs available at the TVP5146 */
-static struct v4l2_input tvp5146_inputs[] = {
-	{
-		.index = 0,
-		.name = "Composite",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-	{
-		.index = 1,
-		.name = "S-Video",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-};
-
-/*
- * this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
- * with tvp5146_inputs
- */
-static struct vpfe_route tvp5146_routes[] = {
-	{
-		.input = INPUT_CVBS_VI2B,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-{
-		.input = INPUT_SVIDEO_VI2C_VI1C,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-};
-
-static struct vpfe_subdev_info vpfe_sub_devs[] = {
-	{
-		.name = "tvp5146",
-		.grp_id = 0,
-		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
-		.inputs = tvp5146_inputs,
-		.routes = tvp5146_routes,
-		.can_route = 1,
-		.ccdc_if_params = {
-			.if_type = VPFE_BT656,
-			.hdpol = VPFE_PINPOL_POSITIVE,
-			.vdpol = VPFE_PINPOL_POSITIVE,
-		},
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &tvp5146_pdata,
-		},
-	},
-};
-
-static struct vpfe_config vpfe_cfg = {
-	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
-	.sub_devs = vpfe_sub_devs,
-	.i2c_adapter_id = 1,
-	.card_name = "DM365 EVM",
-	.ccdc = "ISIF",
-};
-
-/* venc standards timings */
-static struct vpbe_enc_mode_info dm365evm_enc_std_timing[] = {
-	{
-		.name		= "ntsc",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_NTSC,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 480,
-		.aspect		= {11, 10},
-		.fps		= {30000, 1001},
-		.left_margin	= 0x79,
-		.upper_margin	= 0x10,
-	},
-	{
-		.name		= "pal",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_PAL,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 576,
-		.aspect		= {54, 59},
-		.fps		= {25, 1},
-		.left_margin	= 0x7E,
-		.upper_margin	= 0x16,
-	},
-};
-
-/* venc dv timings */
-static struct vpbe_enc_mode_info dm365evm_enc_preset_timing[] = {
-	{
-		.name		= "480p59_94",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_720X480P59_94,
-		.interlaced	= 0,
-		.xres		= 720,
-		.yres		= 480,
-		.aspect		= {1, 1},
-		.fps		= {5994, 100},
-		.left_margin	= 0x8F,
-		.upper_margin	= 0x2D,
-	},
-	{
-		.name		= "576p50",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_720X576P50,
-		.interlaced	= 0,
-		.xres		= 720,
-		.yres		= 576,
-		.aspect		= {1, 1},
-		.fps		= {50, 1},
-		.left_margin	= 0x8C,
-		.upper_margin   = 0x36,
-	},
-	{
-		.name		= "720p60",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_1280X720P60,
-		.interlaced	= 0,
-		.xres		= 1280,
-		.yres		= 720,
-		.aspect		= {1, 1},
-		.fps		= {60, 1},
-		.left_margin	= 0x117,
-		.right_margin	= 70,
-		.upper_margin	= 38,
-		.lower_margin	= 3,
-		.hsync_len	= 80,
-		.vsync_len	= 5,
-	},
-	{
-		.name		= "1080i60",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_1920X1080I60,
-		.interlaced	= 1,
-		.xres		= 1920,
-		.yres		= 1080,
-		.aspect		= {1, 1},
-		.fps		= {30, 1},
-		.left_margin	= 0xc9,
-		.right_margin	= 80,
-		.upper_margin	= 30,
-		.lower_margin	= 3,
-		.hsync_len	= 88,
-		.vsync_len	= 5,
-	},
-};
-
-#define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-
-/*
- * The outputs available from VPBE + ecnoders. Keep the
- * the order same as that of encoders. First those from venc followed by that
- * from encoders. Index in the output refers to index on a particular
- * encoder.Driver uses this index to pass it to encoder when it supports more
- * than one output. Application uses index of the array to set an output.
- */
-static struct vpbe_output dm365evm_vpbe_outputs[] = {
-	{
-		.output		= {
-			.index		= 0,
-			.name		= "Composite",
-			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.std		= VENC_STD_ALL,
-			.capabilities	= V4L2_OUT_CAP_STD,
-		},
-		.subdev_name	= DM365_VPBE_VENC_SUBDEV_NAME,
-		.default_mode	= "ntsc",
-		.num_modes	= ARRAY_SIZE(dm365evm_enc_std_timing),
-		.modes		= dm365evm_enc_std_timing,
-		.if_params	= MEDIA_BUS_FMT_FIXED,
-	},
-	{
-		.output		= {
-			.index		= 1,
-			.name		= "Component",
-			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities	= V4L2_OUT_CAP_DV_TIMINGS,
-		},
-		.subdev_name	= DM365_VPBE_VENC_SUBDEV_NAME,
-		.default_mode	= "480p59_94",
-		.num_modes	= ARRAY_SIZE(dm365evm_enc_preset_timing),
-		.modes		= dm365evm_enc_preset_timing,
-		.if_params	= MEDIA_BUS_FMT_FIXED,
-	},
-};
-
-/*
- * Amplifiers on the board
- */
-static struct ths7303_platform_data ths7303_pdata = {
-	.ch_1 = 3,
-	.ch_2 = 3,
-	.ch_3 = 3,
-};
-
-static struct amp_config_info vpbe_amp = {
-	.module_name	= "ths7303",
-	.is_i2c		= 1,
-	.board_info	= {
-		I2C_BOARD_INFO("ths7303", 0x2c),
-		.platform_data = &ths7303_pdata,
-	}
-};
-
-static struct vpbe_config dm365evm_display_cfg = {
-	.module_name	= "dm365-vpbe-display",
-	.i2c_adapter_id	= 1,
-	.amp		= &vpbe_amp,
-	.osd		= {
-		.module_name	= DM365_VPBE_OSD_SUBDEV_NAME,
-	},
-	.venc		= {
-		.module_name	= DM365_VPBE_VENC_SUBDEV_NAME,
-	},
-	.num_outputs	= ARRAY_SIZE(dm365evm_vpbe_outputs),
-	.outputs	= dm365evm_vpbe_outputs,
-};
-
-static void __init evm_init_i2c(void)
-{
-	davinci_init_i2c(&i2c_pdata);
-	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-}
-
-static inline int have_leds(void)
-{
-#ifdef CONFIG_LEDS_CLASS
-	return 1;
-#else
-	return 0;
-#endif
-}
-
-struct cpld_led {
-	struct led_classdev	cdev;
-	u8			mask;
-};
-
-static const struct {
-	const char *name;
-	const char *trigger;
-} cpld_leds[] = {
-	{ "dm365evm::ds2", },
-	{ "dm365evm::ds3", },
-	{ "dm365evm::ds4", },
-	{ "dm365evm::ds5", },
-	{ "dm365evm::ds6", "nand-disk", },
-	{ "dm365evm::ds7", "mmc1", },
-	{ "dm365evm::ds8", "mmc0", },
-	{ "dm365evm::ds9", "heartbeat", },
-};
-
-static void cpld_led_set(struct led_classdev *cdev, enum led_brightness b)
-{
-	struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
-	u8 reg = __raw_readb(cpld + CPLD_LEDS);
-
-	if (b != LED_OFF)
-		reg &= ~led->mask;
-	else
-		reg |= led->mask;
-	__raw_writeb(reg, cpld + CPLD_LEDS);
-}
-
-static enum led_brightness cpld_led_get(struct led_classdev *cdev)
-{
-	struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
-	u8 reg = __raw_readb(cpld + CPLD_LEDS);
-
-	return (reg & led->mask) ? LED_OFF : LED_FULL;
-}
-
-static int __init cpld_leds_init(void)
-{
-	int	i;
-
-	if (!have_leds() ||  !cpld)
-		return 0;
-
-	/* setup LEDs */
-	__raw_writeb(0xff, cpld + CPLD_LEDS);
-	for (i = 0; i < ARRAY_SIZE(cpld_leds); i++) {
-		struct cpld_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = cpld_leds[i].name;
-		led->cdev.brightness_set = cpld_led_set;
-		led->cdev.brightness_get = cpld_led_get;
-		led->cdev.default_trigger = cpld_leds[i].trigger;
-		led->mask = BIT(i);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-/* run after subsys_initcall() for LEDs */
-fs_initcall(cpld_leds_init);
-
-
-static void __init evm_init_cpld(void)
-{
-	u8 mux, resets;
-	const char *label;
-	struct clk *aemif_clk;
-	int rc;
-
-	/* Make sure we can configure the CPLD through CS1.  Then
-	 * leave it on for later access to MMC and LED registers.
-	 */
-	aemif_clk = clk_get(NULL, "aemif");
-	if (IS_ERR(aemif_clk))
-		return;
-	clk_prepare_enable(aemif_clk);
-
-	if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE,
-			"cpld") == NULL)
-		goto fail;
-	cpld = ioremap(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE);
-	if (!cpld) {
-		release_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE,
-				SECTION_SIZE);
-fail:
-		pr_err("ERROR: can't map CPLD\n");
-		clk_disable_unprepare(aemif_clk);
-		return;
-	}
-
-	/* External muxing for some signals */
-	mux = 0;
-
-	/* Read SW5 to set up NAND + keypad _or_ OneNAND (sync read).
-	 * NOTE:  SW4 bus width setting must match!
-	 */
-	if ((__raw_readb(cpld + CPLD_SWITCH) & BIT(5)) == 0) {
-		/* external keypad mux */
-		mux |= BIT(7);
-
-		rc = platform_device_register(&davinci_aemif_device);
-		if (rc)
-			pr_warn("%s(): error registering the aemif device: %d\n",
-				__func__, rc);
-	} else {
-		/* no OneNAND support yet */
-	}
-
-	/* Leave external chips in reset when unused. */
-	resets = BIT(3) | BIT(2) | BIT(1) | BIT(0);
-
-	/* Static video input config with SN74CBT16214 1-of-3 mux:
-	 *  - port b1 == tvp7002 (mux lowbits == 1 or 6)
-	 *  - port b2 == imager (mux lowbits == 2 or 7)
-	 *  - port b3 == tvp5146 (mux lowbits == 5)
-	 *
-	 * Runtime switching could work too, with limitations.
-	 */
-	if (have_imager()) {
-		label = "HD imager";
-		mux |= 2;
-
-		/* externally mux MMC1/ENET/AIC33 to imager */
-		mux |= BIT(6) | BIT(5) | BIT(3);
-	} else {
-		struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-		/* we can use MMC1 ... */
-		dm365evm_mmc_configure();
-		davinci_setup_mmc(1, &dm365evm_mmc_config);
-
-		/* ... and ENET ... */
-		dm365evm_emac_configure();
-		soc_info->emac_pdata->phy_id = DM365_EVM_PHY_ID;
-		resets &= ~BIT(3);
-
-		/* ... and AIC33 */
-		resets &= ~BIT(1);
-
-		if (have_tvp7002()) {
-			mux |= 1;
-			resets &= ~BIT(2);
-			label = "tvp7002 HD";
-		} else {
-			/* default to tvp5146 */
-			mux |= 5;
-			resets &= ~BIT(0);
-			label = "tvp5146 SD";
-		}
-	}
-	__raw_writeb(mux, cpld + CPLD_MUX);
-	__raw_writeb(resets, cpld + CPLD_RESETS);
-	pr_info("EVM: %s video input\n", label);
-
-	/* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */
-}
-
-static void __init dm365_evm_map_io(void)
-{
-	dm365_init();
-}
-
-static struct spi_eeprom at25640 = {
-	.byte_len	= SZ_64K / 8,
-	.name		= "at25640",
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static const struct spi_board_info dm365_evm_spi_info[] __initconst = {
-	{
-		.modalias	= "at25",
-		.platform_data	= &at25640,
-		.max_speed_hz	= 10 * 1000 * 1000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static __init void dm365_evm_init(void)
-{
-	int ret;
-
-	dm365_register_clocks();
-
-	ret = dm365_gpio_register();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v,
-				     ARRAY_SIZE(fixed_supplies_1_8v), 1800000);
-	regulator_register_always_on(1, "fixed-dummy", fixed_supplies_3_3v,
-				     ARRAY_SIZE(fixed_supplies_3_3v), 3300000);
-
-	nvmem_add_cell_table(&davinci_nvmem_cell_table);
-	nvmem_add_cell_lookups(&davinci_nvmem_cell_lookup, 1);
-
-	evm_init_i2c();
-	davinci_serial_init(dm365_serial_device);
-
-	dm365evm_emac_configure();
-	dm365evm_mmc_configure();
-
-	davinci_setup_mmc(0, &dm365evm_mmc_config);
-
-	dm365_init_video(&vpfe_cfg, &dm365evm_display_cfg);
-
-	/* maybe setup mmc1/etc ... _after_ mmc0 */
-	evm_init_cpld();
-
-#ifdef CONFIG_SND_SOC_DM365_AIC3X_CODEC
-	dm365_init_asp();
-#elif defined(CONFIG_SND_SOC_DM365_VOICE_CODEC)
-	dm365_init_vc();
-#endif
-	dm365_init_rtc();
-	dm365_init_ks(&dm365evm_ks_data);
-
-	dm365_init_spi0(BIT(0), dm365_evm_spi_info,
-			ARRAY_SIZE(dm365_evm_spi_info));
-}
-
-MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
-	.atag_offset	= 0x100,
-	.map_io		= dm365_evm_map_io,
-	.init_irq	= dm365_init_irq,
-	.init_time	= dm365_init_time,
-	.init_machine	= dm365_evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
deleted file mode 100644
index a46e7b9ff8e0..000000000000
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ /dev/null
@@ -1,638 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Critical Link MityOMAP-L138 SoM
- *
- * Copyright (C) 2010 Critical Link LLC - https://www.criticallink.com
- */
-
-#define pr_fmt(fmt) "MityOMAPL138: " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/platform_device.h>
-#include <linux/property.h>
-#include <linux/mtd/partitions.h>
-#include <linux/notifier.h>
-#include <linux/nvmem-consumer.h>
-#include <linux/nvmem-provider.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c.h>
-#include <linux/etherdevice.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/io.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "da8xx.h"
-#include "mux.h"
-
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
-
-#define MITYOMAPL138_PHY_ID		""
-
-#define FACTORY_CONFIG_MAGIC	0x012C0138
-#define FACTORY_CONFIG_VERSION	0x00010001
-
-/* Data Held in On-Board I2C device */
-struct factory_config {
-	u32	magic;
-	u32	version;
-	u8	mac[6];
-	u32	fpga_type;
-	u32	spare;
-	u32	serialnumber;
-	char	partnum[32];
-};
-
-static struct factory_config factory_config;
-
-#ifdef CONFIG_CPU_FREQ
-struct part_no_info {
-	const char	*part_no;	/* part number string of interest */
-	int		max_freq;	/* khz */
-};
-
-static struct part_no_info mityomapl138_pn_info[] = {
-	{
-		.part_no	= "L138-C",
-		.max_freq	= 300000,
-	},
-	{
-		.part_no	= "L138-D",
-		.max_freq	= 375000,
-	},
-	{
-		.part_no	= "L138-F",
-		.max_freq	= 456000,
-	},
-	{
-		.part_no	= "1808-C",
-		.max_freq	= 300000,
-	},
-	{
-		.part_no	= "1808-D",
-		.max_freq	= 375000,
-	},
-	{
-		.part_no	= "1808-F",
-		.max_freq	= 456000,
-	},
-	{
-		.part_no	= "1810-D",
-		.max_freq	= 375000,
-	},
-};
-
-static void mityomapl138_cpufreq_init(const char *partnum)
-{
-	int i, ret;
-
-	for (i = 0; partnum && i < ARRAY_SIZE(mityomapl138_pn_info); i++) {
-		/*
-		 * the part number has additional characters beyond what is
-		 * stored in the table.  This information is not needed for
-		 * determining the speed grade, and would require several
-		 * more table entries.  Only check the first N characters
-		 * for a match.
-		 */
-		if (!strncmp(partnum, mityomapl138_pn_info[i].part_no,
-			     strlen(mityomapl138_pn_info[i].part_no))) {
-			da850_max_speed = mityomapl138_pn_info[i].max_freq;
-			break;
-		}
-	}
-
-	ret = da850_register_cpufreq("pll0_sysclk3");
-	if (ret)
-		pr_warn("cpufreq registration failed: %d\n", ret);
-}
-#else
-static void mityomapl138_cpufreq_init(const char *partnum) { }
-#endif
-
-static int read_factory_config(struct notifier_block *nb,
-			       unsigned long event, void *data)
-{
-	int ret;
-	const char *partnum = NULL;
-	struct nvmem_device *nvmem = data;
-
-	if (strcmp(nvmem_dev_name(nvmem), "1-00500") != 0)
-		return NOTIFY_DONE;
-
-	if (!IS_BUILTIN(CONFIG_NVMEM)) {
-		pr_warn("Factory Config not available without CONFIG_NVMEM\n");
-		goto bad_config;
-	}
-
-	ret = nvmem_device_read(nvmem, 0, sizeof(factory_config),
-				&factory_config);
-	if (ret != sizeof(struct factory_config)) {
-		pr_warn("Read Factory Config Failed: %d\n", ret);
-		goto bad_config;
-	}
-
-	if (factory_config.magic != FACTORY_CONFIG_MAGIC) {
-		pr_warn("Factory Config Magic Wrong (%X)\n",
-			factory_config.magic);
-		goto bad_config;
-	}
-
-	if (factory_config.version != FACTORY_CONFIG_VERSION) {
-		pr_warn("Factory Config Version Wrong (%X)\n",
-			factory_config.version);
-		goto bad_config;
-	}
-
-	partnum = factory_config.partnum;
-	pr_info("Part Number = %s\n", partnum);
-
-bad_config:
-	/* default maximum speed is valid for all platforms */
-	mityomapl138_cpufreq_init(partnum);
-
-	return NOTIFY_STOP;
-}
-
-static struct notifier_block mityomapl138_nvmem_notifier = {
-	.notifier_call = read_factory_config,
-};
-
-/*
- * We don't define a cell for factory config as it will be accessed from the
- * board file using the nvmem notifier chain.
- */
-static struct nvmem_cell_info mityomapl138_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x64,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table mityomapl138_nvmem_cell_table = {
-	.nvmem_name	= "1-00500",
-	.cells		= mityomapl138_nvmem_cells,
-	.ncells		= ARRAY_SIZE(mityomapl138_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup mityomapl138_nvmem_cell_lookup = {
-	.nvmem_name	= "1-00500",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static const struct property_entry mityomapl138_fd_chip_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 8),
-	PROPERTY_ENTRY_BOOL("read-only"),
-	{ }
-};
-
-static const struct software_node mityomapl138_fd_chip_node = {
-	.properties = mityomapl138_fd_chip_properties,
-};
-
-static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = {
-	.bus_freq	= 100,	/* kHz */
-	.bus_delay	= 0,	/* usec */
-};
-
-/* TPS65023 voltage regulator support */
-/* 1.2V Core */
-static struct regulator_consumer_supply tps65023_dcdc1_consumers[] = {
-	{
-		.supply = "cvdd",
-	},
-};
-
-/* 1.8V */
-static struct regulator_consumer_supply tps65023_dcdc2_consumers[] = {
-	{
-		.supply = "usb0_vdda18",
-	},
-	{
-		.supply = "usb1_vdda18",
-	},
-	{
-		.supply = "ddr_dvdd18",
-	},
-	{
-		.supply = "sata_vddr",
-	},
-};
-
-/* 1.2V */
-static struct regulator_consumer_supply tps65023_dcdc3_consumers[] = {
-	{
-		.supply = "sata_vdd",
-	},
-	{
-		.supply = "usb_cvdd",
-	},
-	{
-		.supply = "pll0_vdda",
-	},
-	{
-		.supply = "pll1_vdda",
-	},
-};
-
-/* 1.8V Aux LDO, not used */
-static struct regulator_consumer_supply tps65023_ldo1_consumers[] = {
-	{
-		.supply = "1.8v_aux",
-	},
-};
-
-/* FPGA VCC Aux (2.5 or 3.3) LDO */
-static struct regulator_consumer_supply tps65023_ldo2_consumers[] = {
-	{
-		.supply = "vccaux",
-	},
-};
-
-static struct regulator_init_data tps65023_regulator_data[] = {
-	/* dcdc1 */
-	{
-		.constraints = {
-			.min_uV = 1150000,
-			.max_uV = 1350000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc1_consumers),
-		.consumer_supplies = tps65023_dcdc1_consumers,
-	},
-	/* dcdc2 */
-	{
-		.constraints = {
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc2_consumers),
-		.consumer_supplies = tps65023_dcdc2_consumers,
-	},
-	/* dcdc3 */
-	{
-		.constraints = {
-			.min_uV = 1200000,
-			.max_uV = 1200000,
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc3_consumers),
-		.consumer_supplies = tps65023_dcdc3_consumers,
-	},
-	/* ldo1 */
-	{
-		.constraints = {
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_ldo1_consumers),
-		.consumer_supplies = tps65023_ldo1_consumers,
-	},
-	/* ldo2 */
-	{
-		.constraints = {
-			.min_uV = 2500000,
-			.max_uV = 3300000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_ldo2_consumers),
-		.consumer_supplies = tps65023_ldo2_consumers,
-	},
-};
-
-static struct i2c_board_info __initdata mityomap_tps65023_info[] = {
-	{
-		I2C_BOARD_INFO("tps65023", 0x48),
-		.platform_data = &tps65023_regulator_data[0],
-	},
-	{
-		I2C_BOARD_INFO("24c02", 0x50),
-		.swnode = &mityomapl138_fd_chip_node,
-	},
-};
-
-static int __init pmic_tps65023_init(void)
-{
-	return i2c_register_board_info(1, mityomap_tps65023_info,
-					ARRAY_SIZE(mityomap_tps65023_info));
-}
-
-/*
- * SPI Devices:
- *	SPI1_CS0: 8M Flash ST-M25P64-VME6G
- */
-static struct mtd_partition spi_flash_partitions[] = {
-	[0] = {
-		.name		= "ubl",
-		.offset		= 0,
-		.size		= SZ_64K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[1] = {
-		.name		= "u-boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[2] = {
-		.name		= "u-boot-env",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_64K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[3] = {
-		.name		= "periph-config",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_64K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[4] = {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_256K + SZ_64K,
-	},
-	[5] = {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M + SZ_1M,
-	},
-	[6] = {
-		.name		= "fpga",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-	},
-	[7] = {
-		.name		= "spare",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct flash_platform_data mityomapl138_spi_flash_data = {
-	.name		= "m25p80",
-	.parts		= spi_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(spi_flash_partitions),
-	.type		= "m24p64",
-};
-
-static struct davinci_spi_config spi_eprom_config = {
-	.io_type	= SPI_IO_TYPE_DMA,
-	.c2tdelay	= 8,
-	.t2cdelay	= 8,
-};
-
-static struct spi_board_info mityomapl138_spi_flash_info[] = {
-	{
-		.modalias		= "m25p80",
-		.platform_data		= &mityomapl138_spi_flash_data,
-		.controller_data	= &spi_eprom_config,
-		.mode			= SPI_MODE_0,
-		.max_speed_hz		= 30000000,
-		.bus_num		= 1,
-		.chip_select		= 0,
-	},
-};
-
-/*
- * MityDSP-L138 includes a 256 MByte large-page NAND flash
- * (128K blocks).
- */
-static struct mtd_partition mityomapl138_nandflash_partition[] = {
-	{
-		.name		= "rootfs",
-		.offset		= 0,
-		.size		= SZ_128M,
-		.mask_flags	= 0, /* MTD_WRITEABLE, */
-	},
-	{
-		.name		= "homefs",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	},
-};
-
-static struct davinci_nand_pdata mityomapl138_nandflash_data = {
-	.core_chipsel	= 1,
-	.parts		= mityomapl138_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(mityomapl138_nandflash_partition),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.options	= NAND_BUSWIDTH_16,
-	.ecc_bits	= 1, /* 4 bit mode is not supported with 16 bit NAND */
-};
-
-static struct resource mityomapl138_nandflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device mityomapl138_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 1,
-		.dev		= {
-			.platform_data	= &mityomapl138_nandflash_data,
-		},
-		.num_resources	= ARRAY_SIZE(mityomapl138_nandflash_resource),
-		.resource	= mityomapl138_nandflash_resource,
-	},
-};
-
-static struct resource mityomapl138_aemif_resources[] = {
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct aemif_abus_data mityomapl138_aemif_abus_data[] = {
-	{
-		.cs	= 1,
-	},
-};
-
-static struct aemif_platform_data mityomapl138_aemif_pdata = {
-	.abus_data		= mityomapl138_aemif_abus_data,
-	.num_abus_data		= ARRAY_SIZE(mityomapl138_aemif_abus_data),
-	.sub_devices		= mityomapl138_aemif_devices,
-	.num_sub_devices	= ARRAY_SIZE(mityomapl138_aemif_devices),
-};
-
-static struct platform_device mityomapl138_aemif_device = {
-	.name		= "ti-aemif",
-	.id		= -1,
-	.dev = {
-		.platform_data	= &mityomapl138_aemif_pdata,
-	},
-	.resource	= mityomapl138_aemif_resources,
-	.num_resources	= ARRAY_SIZE(mityomapl138_aemif_resources),
-};
-
-static void __init mityomapl138_setup_nand(void)
-{
-	if (platform_device_register(&mityomapl138_aemif_device))
-		pr_warn("%s: Cannot register AEMIF device\n", __func__);
-}
-
-static const short mityomap_mii_pins[] = {
-	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
-	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
-	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
-	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static const short mityomap_rmii_pins[] = {
-	DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
-	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
-	DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static void __init mityomapl138_config_emac(void)
-{
-	void __iomem *cfg_chip3_base;
-	int ret;
-	u32 val;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	soc_info->emac_pdata->rmii_en = 0; /* hardcoded for now */
-
-	cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
-	val = __raw_readl(cfg_chip3_base);
-
-	if (soc_info->emac_pdata->rmii_en) {
-		val |= BIT(8);
-		ret = davinci_cfg_reg_list(mityomap_rmii_pins);
-		pr_info("RMII PHY configured\n");
-	} else {
-		val &= ~BIT(8);
-		ret = davinci_cfg_reg_list(mityomap_mii_pins);
-		pr_info("MII PHY configured\n");
-	}
-
-	if (ret) {
-		pr_warn("mii/rmii mux setup failed: %d\n", ret);
-		return;
-	}
-
-	/* configure the CFGCHIP3 register for RMII or MII */
-	__raw_writel(val, cfg_chip3_base);
-
-	soc_info->emac_pdata->phy_id = MITYOMAPL138_PHY_ID;
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warn("emac registration failed: %d\n", ret);
-}
-
-static void __init mityomapl138_init(void)
-{
-	int ret;
-
-	da850_register_clocks();
-
-	/* for now, no special EDMA channels are reserved */
-	ret = da850_register_edma(NULL);
-	if (ret)
-		pr_warn("edma registration failed: %d\n", ret);
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warn("watchdog registration failed: %d\n", ret);
-
-	davinci_serial_init(da8xx_serial_device);
-
-	nvmem_register_notifier(&mityomapl138_nvmem_notifier);
-	nvmem_add_cell_table(&mityomapl138_nvmem_cell_table);
-	nvmem_add_cell_lookups(&mityomapl138_nvmem_cell_lookup, 1);
-
-	ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
-	if (ret)
-		pr_warn("i2c0 registration failed: %d\n", ret);
-
-	ret = pmic_tps65023_init();
-	if (ret)
-		pr_warn("TPS65023 PMIC init failed: %d\n", ret);
-
-	mityomapl138_setup_nand();
-
-	ret = spi_register_board_info(mityomapl138_spi_flash_info,
-				      ARRAY_SIZE(mityomapl138_spi_flash_info));
-	if (ret)
-		pr_warn("spi info registration failed: %d\n", ret);
-
-	ret = da8xx_register_spi_bus(1,
-				     ARRAY_SIZE(mityomapl138_spi_flash_info));
-	if (ret)
-		pr_warn("spi 1 registration failed: %d\n", ret);
-
-	mityomapl138_config_emac();
-
-	ret = da8xx_register_rtc();
-	if (ret)
-		pr_warn("rtc setup failed: %d\n", ret);
-
-	ret = da8xx_register_cpuidle();
-	if (ret)
-		pr_warn("cpuidle registration failed: %d\n", ret);
-
-	davinci_pm_init();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init mityomapl138_console_init(void)
-{
-	if (!machine_is_mityomapl138())
-		return 0;
-
-	return add_preferred_console("ttyS", 1, "115200");
-}
-console_initcall(mityomapl138_console_init);
-#endif
-
-static void __init mityomapl138_map_io(void)
-{
-	da850_init();
-}
-
-MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
-	.atag_offset	= 0x100,
-	.map_io		= mityomapl138_map_io,
-	.init_irq	= da850_init_irq,
-	.init_time	= da850_init_time,
-	.init_machine	= mityomapl138_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
deleted file mode 100644
index 8a80115999ad..000000000000
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ /dev/null
@@ -1,451 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hawkboard.org based on TI's OMAP-L138 Platform
- *
- * Initial code: Syed Mohammed Khasim
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "da8xx.h"
-#include "mux.h"
-
-#define HAWKBOARD_PHY_ID		"davinci_mdio-0:07"
-
-#define DA850_USB1_VBUS_PIN		GPIO_TO_PIN(2, 4)
-#define DA850_USB1_OC_PIN		GPIO_TO_PIN(6, 13)
-
-static short omapl138_hawk_mii_pins[] __initdata = {
-	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
-	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
-	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
-	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static __init void omapl138_hawk_config_emac(void)
-{
-	void __iomem *cfgchip3 = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
-	int ret;
-	u32 val;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	val = __raw_readl(cfgchip3);
-	val &= ~BIT(8);
-	ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins);
-	if (ret) {
-		pr_warn("%s: CPGMAC/MII mux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	/* configure the CFGCHIP3 register for MII */
-	__raw_writel(val, cfgchip3);
-	pr_info("EMAC: MII PHY configured\n");
-
-	soc_info->emac_pdata->phy_id = HAWKBOARD_PHY_ID;
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
-}
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM/Hawkboard,
- * hence they are being reserved for codecs on the DSP side.
- */
-static const s16 da850_dma0_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma0_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30, 50},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30, 90},
-	{-1, -1}
-};
-
-static struct edma_rsv_info da850_edma_cc0_rsv = {
-	.rsv_chans	= da850_dma0_rsv_chans,
-	.rsv_slots	= da850_dma0_rsv_slots,
-};
-
-static struct edma_rsv_info da850_edma_cc1_rsv = {
-	.rsv_chans	= da850_dma1_rsv_chans,
-	.rsv_slots	= da850_dma1_rsv_slots,
-};
-
-static struct edma_rsv_info *da850_edma_rsv[2] = {
-	&da850_edma_cc0_rsv,
-	&da850_edma_cc1_rsv,
-};
-
-static const short hawk_mmcsd0_pins[] = {
-	DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
-	DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
-	DA850_GPIO3_12, DA850_GPIO3_13,
-	-1
-};
-
-#define DA850_HAWK_MMCSD_CD_PIN		GPIO_TO_PIN(3, 12)
-#define DA850_HAWK_MMCSD_WP_PIN		GPIO_TO_PIN(3, 13)
-
-static struct gpiod_lookup_table mmc_gpios_table = {
-	.dev_id = "da830-mmc.0",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_CD_PIN, "cd",
-			    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_WP_PIN, "wp",
-			    GPIO_ACTIVE_LOW),
-	},
-};
-
-static struct davinci_mmc_config da850_mmc_config = {
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static __init void omapl138_hawk_mmc_init(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(hawk_mmcsd0_pins);
-	if (ret) {
-		pr_warn("%s: MMC/SD0 mux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	gpiod_add_lookup_table(&mmc_gpios_table);
-
-	ret = da8xx_register_mmcsd0(&da850_mmc_config);
-	if (ret) {
-		pr_warn("%s: MMC/SD0 registration failed: %d\n", __func__, ret);
-		goto mmc_setup_mmcsd_fail;
-	}
-
-	return;
-
-mmc_setup_mmcsd_fail:
-	gpiod_remove_lookup_table(&mmc_gpios_table);
-}
-
-static struct mtd_partition omapl138_hawk_nandflash_partition[] = {
-	{
-		.name		= "u-boot env",
-		.offset		= 0,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	 },
-	{
-		.name		= "u-boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "free space",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	},
-};
-
-static struct davinci_aemif_timing omapl138_hawk_nandflash_timing = {
-	.wsetup		= 24,
-	.wstrobe	= 21,
-	.whold		= 14,
-	.rsetup		= 19,
-	.rstrobe	= 50,
-	.rhold		= 0,
-	.ta		= 20,
-};
-
-static struct davinci_nand_pdata omapl138_hawk_nandflash_data = {
-	.core_chipsel	= 1,
-	.parts		= omapl138_hawk_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(omapl138_hawk_nandflash_partition),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_bits	= 4,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.options	= NAND_BUSWIDTH_16,
-	.timing		= &omapl138_hawk_nandflash_timing,
-	.mask_chipsel	= 0,
-	.mask_ale	= 0,
-	.mask_cle	= 0,
-};
-
-static struct resource omapl138_hawk_nandflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + SZ_32M,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource omapl138_hawk_aemif_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct aemif_abus_data omapl138_hawk_aemif_abus_data[] = {
-	{
-		.cs	= 3,
-	}
-};
-
-static struct platform_device omapl138_hawk_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= -1,
-		.dev		= {
-			.platform_data	= &omapl138_hawk_nandflash_data,
-		},
-		.resource	= omapl138_hawk_nandflash_resource,
-		.num_resources	= ARRAY_SIZE(omapl138_hawk_nandflash_resource),
-	}
-};
-
-static struct aemif_platform_data omapl138_hawk_aemif_pdata = {
-	.cs_offset = 2,
-	.abus_data = omapl138_hawk_aemif_abus_data,
-	.num_abus_data = ARRAY_SIZE(omapl138_hawk_aemif_abus_data),
-	.sub_devices = omapl138_hawk_aemif_devices,
-	.num_sub_devices = ARRAY_SIZE(omapl138_hawk_aemif_devices),
-};
-
-static struct platform_device omapl138_hawk_aemif_device = {
-	.name		= "ti-aemif",
-	.id		= -1,
-	.dev = {
-		.platform_data	= &omapl138_hawk_aemif_pdata,
-	},
-	.resource	= omapl138_hawk_aemif_resource,
-	.num_resources	= ARRAY_SIZE(omapl138_hawk_aemif_resource),
-};
-
-static const short omapl138_hawk_nand_pins[] = {
-	DA850_EMA_WAIT_1, DA850_NEMA_OE, DA850_NEMA_WE, DA850_NEMA_CS_3,
-	DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
-	DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7,
-	DA850_EMA_D_8, DA850_EMA_D_9, DA850_EMA_D_10, DA850_EMA_D_11,
-	DA850_EMA_D_12, DA850_EMA_D_13, DA850_EMA_D_14, DA850_EMA_D_15,
-	DA850_EMA_A_1, DA850_EMA_A_2,
-	-1
-};
-
-static int omapl138_hawk_register_aemif(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(omapl138_hawk_nand_pins);
-	if (ret)
-		pr_warn("%s: NAND mux setup failed: %d\n", __func__, ret);
-
-	return platform_device_register(&omapl138_hawk_aemif_device);
-}
-
-static const short da850_hawk_usb11_pins[] = {
-	DA850_GPIO2_4, DA850_GPIO6_13,
-	-1
-};
-
-static struct regulator_consumer_supply hawk_usb_supplies[] = {
-	REGULATOR_SUPPLY("vbus", NULL),
-};
-
-static struct regulator_init_data hawk_usb_vbus_data = {
-	.consumer_supplies	= hawk_usb_supplies,
-	.num_consumer_supplies	= ARRAY_SIZE(hawk_usb_supplies),
-	.constraints    = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config hawk_usb_vbus = {
-	.supply_name		= "vbus",
-	.microvolts		= 3300000,
-	.init_data		= &hawk_usb_vbus_data,
-};
-
-static struct platform_device hawk_usb_vbus_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &hawk_usb_vbus,
-	},
-};
-
-static struct gpiod_lookup_table hawk_usb_oc_gpio_lookup = {
-	.dev_id		= "ohci-da8xx",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table hawk_usb_vbus_gpio_lookup = {
-	.dev_id		= "reg-fixed-voltage.0",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, NULL, 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table *hawk_usb_gpio_lookups[] = {
-	&hawk_usb_oc_gpio_lookup,
-	&hawk_usb_vbus_gpio_lookup,
-};
-
-static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = {
-	/* TPS2087 switch @ 5V */
-	.potpgt         = (3 + 1) / 2,  /* 3 ms max */
-};
-
-static __init void omapl138_hawk_usb_init(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(da850_hawk_usb11_pins);
-	if (ret) {
-		pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	ret = da8xx_register_usb_phy_clocks();
-	if (ret)
-		pr_warn("%s: USB PHY CLK registration failed: %d\n",
-			__func__, ret);
-
-	gpiod_add_lookup_tables(hawk_usb_gpio_lookups,
-				ARRAY_SIZE(hawk_usb_gpio_lookups));
-
-	ret = da8xx_register_usb_phy();
-	if (ret)
-		pr_warn("%s: USB PHY registration failed: %d\n",
-			__func__, ret);
-
-	ret = platform_device_register(&hawk_usb_vbus_device);
-	if (ret) {
-		pr_warn("%s: Unable to register the vbus supply\n", __func__);
-		return;
-	}
-
-	ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
-	if (ret)
-		pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
-
-	return;
-}
-
-static __init void omapl138_hawk_init(void)
-{
-	int ret;
-
-	da850_register_clocks();
-
-	ret = da850_register_gpio();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	davinci_serial_init(da8xx_serial_device);
-
-	omapl138_hawk_config_emac();
-
-	ret = da850_register_edma(da850_edma_rsv);
-	if (ret)
-		pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
-
-	omapl138_hawk_mmc_init();
-
-	omapl138_hawk_usb_init();
-
-	ret = omapl138_hawk_register_aemif();
-	if (ret)
-		pr_warn("%s: aemif registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warn("%s: watchdog registration failed: %d\n",
-			__func__, ret);
-
-	ret = da8xx_register_rproc();
-	if (ret)
-		pr_warn("%s: dsp/rproc registration failed: %d\n",
-			__func__, ret);
-
-	regulator_has_full_constraints();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init omapl138_hawk_console_init(void)
-{
-	if (!machine_is_omapl138_hawkboard())
-		return 0;
-
-	return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(omapl138_hawk_console_init);
-#endif
-
-static void __init omapl138_hawk_map_io(void)
-{
-	da850_init();
-}
-
-MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
-	.atag_offset	= 0x100,
-	.map_io		= omapl138_hawk_map_io,
-	.init_irq	= da850_init_irq,
-	.init_time	= da850_init_time,
-	.init_machine	= omapl138_hawk_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-	.reserve	= da8xx_rproc_reserve_cma,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index c1ce6b2a8d48..7bc7018688de 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -11,6 +11,7 @@
 #include <linux/etherdevice.h>
 #include <linux/davinci_emac.h>
 #include <linux/dma-mapping.h>
+#include <linux/platform_data/davinci-cpufreq.h>
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-davinci/common.h b/arch/arm/mach-davinci/common.h
index 772b51e0ac5e..81a2b06b46e9 100644
--- a/arch/arm/mach-davinci/common.h
+++ b/arch/arm/mach-davinci/common.h
@@ -17,8 +17,8 @@
 
 #include <asm/irq.h>
 
-#define DAVINCI_INTC_START		NR_IRQS
-#define DAVINCI_INTC_IRQ(_irqnum)	(DAVINCI_INTC_START + (_irqnum))
+#define DAVINCI_INTC_START             NR_IRQS
+#define DAVINCI_INTC_IRQ(_irqnum)      (DAVINCI_INTC_START + (_irqnum))
 
 struct davinci_gpio_controller;
 
@@ -45,9 +45,6 @@ struct davinci_soc_info {
 	unsigned			gpio_num;
 	unsigned			gpio_irq;
 	unsigned			gpio_unbanked;
-	struct davinci_gpio_controller	*gpio_ctlrs;
-	int				gpio_ctlrs_num;
-	struct emac_platform_data	*emac_pdata;
 	dma_addr_t			sram_dma;
 	unsigned			sram_len;
 };
@@ -55,15 +52,8 @@ struct davinci_soc_info {
 extern struct davinci_soc_info davinci_soc_info;
 
 extern void davinci_common_init(const struct davinci_soc_info *soc_info);
-extern void davinci_init_ide(void);
 void davinci_init_late(void);
 
-#ifdef CONFIG_CPU_FREQ
-int davinci_cpufreq_init(void);
-#else
-static inline int davinci_cpufreq_init(void) { return 0; }
-#endif
-
 #ifdef CONFIG_SUSPEND
 int davinci_pm_init(void);
 #else
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
deleted file mode 100644
index dd38785536d5..000000000000
--- a/arch/arm/mach-davinci/cpuidle.c
+++ /dev/null
@@ -1,99 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * CPU idle for DaVinci SoCs
- *
- * Copyright (C) 2009 Texas Instruments Incorporated. https://www.ti.com/
- *
- * Derived from Marvell Kirkwood CPU idle code
- * (arch/arm/mach-kirkwood/cpuidle.c)
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/cpuidle.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <asm/cpuidle.h>
-
-#include "cpuidle.h"
-#include "ddr2.h"
-
-#define DAVINCI_CPUIDLE_MAX_STATES	2
-
-static void __iomem *ddr2_reg_base;
-static bool ddr2_pdown;
-
-static void davinci_save_ddr_power(int enter, bool pdown)
-{
-	u32 val;
-
-	val = __raw_readl(ddr2_reg_base + DDR2_SDRCR_OFFSET);
-
-	if (enter) {
-		if (pdown)
-			val |= DDR2_SRPD_BIT;
-		else
-			val &= ~DDR2_SRPD_BIT;
-		val |= DDR2_LPMODEN_BIT;
-	} else {
-		val &= ~(DDR2_SRPD_BIT | DDR2_LPMODEN_BIT);
-	}
-
-	__raw_writel(val, ddr2_reg_base + DDR2_SDRCR_OFFSET);
-}
-
-/* Actual code that puts the SoC in different idle states */
-static int davinci_enter_idle(struct cpuidle_device *dev,
-			      struct cpuidle_driver *drv, int index)
-{
-	davinci_save_ddr_power(1, ddr2_pdown);
-	cpu_do_idle();
-	davinci_save_ddr_power(0, ddr2_pdown);
-
-	return index;
-}
-
-static struct cpuidle_driver davinci_idle_driver = {
-	.name			= "cpuidle-davinci",
-	.owner			= THIS_MODULE,
-	.states[0]		= ARM_CPUIDLE_WFI_STATE,
-	.states[1]		= {
-		.enter			= davinci_enter_idle,
-		.exit_latency		= 10,
-		.target_residency	= 10000,
-		.name			= "DDR SR",
-		.desc			= "WFI and DDR Self Refresh",
-	},
-	.state_count = DAVINCI_CPUIDLE_MAX_STATES,
-};
-
-static int __init davinci_cpuidle_probe(struct platform_device *pdev)
-{
-	struct davinci_cpuidle_config *pdata = pdev->dev.platform_data;
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "cannot get platform data\n");
-		return -ENOENT;
-	}
-
-	ddr2_reg_base = pdata->ddr2_ctlr_base;
-
-	ddr2_pdown = pdata->ddr2_pdown;
-
-	return cpuidle_register(&davinci_idle_driver, NULL);
-}
-
-static struct platform_driver davinci_cpuidle_driver = {
-	.driver = {
-		.name	= "cpuidle-davinci",
-	},
-};
-
-static int __init davinci_cpuidle_init(void)
-{
-	return platform_driver_probe(&davinci_cpuidle_driver,
-						davinci_cpuidle_probe);
-}
-device_initcall(davinci_cpuidle_init);
-
diff --git a/arch/arm/mach-davinci/cpuidle.h b/arch/arm/mach-davinci/cpuidle.h
deleted file mode 100644
index 976d43073597..000000000000
--- a/arch/arm/mach-davinci/cpuidle.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * TI DaVinci cpuidle platform support
- *
- * 2009 (C) Texas Instruments, Inc. https://www.ti.com/
- */
-#ifndef _MACH_DAVINCI_CPUIDLE_H
-#define _MACH_DAVINCI_CPUIDLE_H
-
-struct davinci_cpuidle_config {
-	u32 ddr2_pdown;
-	void __iomem *ddr2_ctlr_base;
-};
-
-#endif
diff --git a/arch/arm/mach-davinci/cputype.h b/arch/arm/mach-davinci/cputype.h
index 4590afdbe449..a8f5330aaad1 100644
--- a/arch/arm/mach-davinci/cputype.h
+++ b/arch/arm/mach-davinci/cputype.h
@@ -25,60 +25,6 @@ struct davinci_id {
 };
 
 /* Can use lower 16 bits of cpu id  for a variant when required */
-#define	DAVINCI_CPU_ID_DM6446		0x64460000
-#define	DAVINCI_CPU_ID_DM6467		0x64670000
-#define	DAVINCI_CPU_ID_DM355		0x03550000
-#define	DAVINCI_CPU_ID_DM365		0x03650000
-#define	DAVINCI_CPU_ID_DA830		0x08300000
 #define	DAVINCI_CPU_ID_DA850		0x08500000
 
-#define IS_DAVINCI_CPU(type, id)					\
-static inline int is_davinci_ ##type(void)				\
-{									\
-	return (davinci_soc_info.cpu_id == (id));			\
-}
-
-IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
-IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
-IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
-IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
-IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830)
-IS_DAVINCI_CPU(da850, DAVINCI_CPU_ID_DA850)
-
-#ifdef CONFIG_ARCH_DAVINCI_DM644x
-#define cpu_is_davinci_dm644x() is_davinci_dm644x()
-#else
-#define cpu_is_davinci_dm644x() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DM646x
-#define cpu_is_davinci_dm646x() is_davinci_dm646x()
-#else
-#define cpu_is_davinci_dm646x() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DM355
-#define cpu_is_davinci_dm355() is_davinci_dm355()
-#else
-#define cpu_is_davinci_dm355() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DM365
-#define cpu_is_davinci_dm365() is_davinci_dm365()
-#else
-#define cpu_is_davinci_dm365() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DA830
-#define cpu_is_davinci_da830() is_davinci_da830()
-#else
-#define cpu_is_davinci_da830() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DA850
-#define cpu_is_davinci_da850() is_davinci_da850()
-#else
-#define cpu_is_davinci_da850() 0
-#endif
-
 #endif
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
deleted file mode 100644
index eab5fac18806..000000000000
--- a/arch/arm/mach-davinci/da830.c
+++ /dev/null
@@ -1,781 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DA830/OMAP L137 chip specific setup
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2009 (c) MontaVista Software, Inc.
- */
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip/irq-davinci-cp-intc.h>
-#include <linux/platform_data/gpio-davinci.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "cputype.h"
-#include "da8xx.h"
-#include "irqs.h"
-#include "mux.h"
-
-/* Offsets of the 8 compare registers on the da830 */
-#define DA830_CMP12_0		0x60
-#define DA830_CMP12_1		0x64
-#define DA830_CMP12_2		0x68
-#define DA830_CMP12_3		0x6c
-#define DA830_CMP12_4		0x70
-#define DA830_CMP12_5		0x74
-#define DA830_CMP12_6		0x78
-#define DA830_CMP12_7		0x7c
-
-#define DA830_REF_FREQ		24000000
-
-/*
- * Device specific mux setup
- *
- *	     soc      description	mux    mode    mode   mux	dbg
- *					reg   offset   mask   mode
- */
-static const struct mux_config da830_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-	MUX_CFG(DA830, GPIO7_14,	0,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, RTCK,		0,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_15,	0,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMU_0,		0,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_SDCKE,	0,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_CLK_GLUE,	0,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_CLK,		0,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, NEMB_CS_0,	0,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_CAS,	0,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_RAS,	0,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE,		0,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_BA_1,	1,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_BA_0,	1,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_0,		1,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_1,		1,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_2,		1,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_3,		1,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_4,		1,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_5,		1,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, GPIO7_0,		1,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_1,		1,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_2,		1,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_3,		1,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_4,		1,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_5,		1,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_6,		1,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_7,		1,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_A_6,		2,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_7,		2,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_8,		2,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_9,		2,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_10,	2,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_11,	2,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_12,	2,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_31,	2,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, GPIO7_8,		2,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_9,		2,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_10,	2,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_11,	2,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_12,	2,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_13,	2,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_13,	2,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_D_30,	3,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_29,	3,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_28,	3,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_27,	3,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_26,	3,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_25,	3,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_24,	3,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_23,	3,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_22,	4,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_21,	4,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_20,	4,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_19,	4,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_18,	4,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_17,	4,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_16,	4,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE_DQM_3,	4,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE_DQM_2,	5,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_0,		5,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_1,		5,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_2,		5,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_3,		5,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_4,		5,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_5,		5,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_6,		5,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, GPIO6_0,		5,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_1,		5,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_2,		5,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_3,		5,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_4,		5,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_5,		5,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_6,		5,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_D_7,		6,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_8,		6,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_9,		6,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_10,	6,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_11,	6,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_12,	6,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_13,	6,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_14,	6,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, GPIO6_7,		6,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_8,		6,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_9,		6,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_10,	6,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_11,	6,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_12,	6,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_13,	6,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_14,	6,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_D_15,	7,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE_DQM_1,	7,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE_DQM_0,	7,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI0_SOMI_0,	7,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI0_SIMO_0,	7,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI0_CLK,	7,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, NSPI0_ENA,	7,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NSPI0_SCS_0,	7,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, EQEP0I,		7,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP0S,		7,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP1I,		7,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, NUART0_CTS,	7,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, NUART0_RTS,	7,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP0A,		7,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, EQEP0B,		7,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO6_15,	7,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_14,	7,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_15,	7,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_0,		7,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_1,		7,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_2,		7,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_3,		7,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_4,		7,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, SPI1_SOMI_0,	8,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI1_SIMO_0,	8,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI1_CLK,	8,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, UART0_RXD,	8,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, UART0_TXD,	8,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_10,		8,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_11,		8,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NSPI1_ENA,	8,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, I2C1_SCL,	8,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, I2C1_SDA,	8,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP1S,		8,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, I2C0_SDA,	8,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, I2C0_SCL,	8,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, UART2_RXD,	8,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, TM64P0_IN12,	8,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, TM64P0_OUT12,	8,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO5_5,		8,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_6,		8,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_7,		8,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_8,		8,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_9,		8,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_10,	8,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_11,	8,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_12,	8,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, NSPI1_SCS_0,	9,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, USB0_DRVVBUS,	9,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, AHCLKX0,		9,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, ACLKX0,		9,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AFSX0,		9,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AHCLKR0,		9,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, ACLKR0,		9,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, AFSR0,		9,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, UART2_TXD,	9,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, AHCLKX2,		9,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, ECAP0_APWM0,	9,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_MHZ_50_CLK,	9,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, ECAP1_APWM1,	9,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, USB_REFCLKIN,	9,	8,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO5_13,	9,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_15,	9,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_11,	9,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_12,	9,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_13,	9,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_14,	9,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_15,	9,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_12,	9,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, AMUTE0,		10,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_0,		10,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_1,		10,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_2,		10,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_3,		10,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_4,		10,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_5,		10,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_6,		10,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, RMII_TXD_0,	10,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_TXD_1,	10,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_TXEN,	10,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_CRS_DV,	10,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_RXD_0,	10,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_RXD_1,	10,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_RXER,	10,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, AFSR2,		10,	4,	0xf,	4,	false)
-	MUX_CFG(DA830, ACLKX2,		10,	8,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR2_3,		10,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR2_2,		10,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR2_1,		10,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, AFSX2,		10,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, ACLKR2,		10,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, NRESETOUT,	10,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_0,		10,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_1,		10,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_2,		10,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_3,		10,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_4,		10,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_5,		10,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_6,		10,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, AXR0_7,		11,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_8,		11,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, UART1_RXD,	11,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, UART1_TXD,	11,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_11,		11,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AHCLKX1,		11,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, ACLKX1,		11,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, AFSX1,		11,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, MDIO_CLK,	11,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, MDIO_D,		11,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, AXR0_9,		11,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, AXR0_10,		11,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM0B,		11,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM0A,		11,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWMSYNCI,	11,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, AXR2_0,		11,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, EPWMSYNC0,	11,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO3_7,		11,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_8,		11,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_9,		11,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_10,	11,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_11,	11,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_14,	11,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_15,	11,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_10,	11,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, AHCLKR1,		12,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, ACLKR1,		12,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, AFSR1,		12,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, AMUTE1,		12,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_0,		12,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_1,		12,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_2,		12,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_3,		12,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, ECAP2_APWM2,	12,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, EHRPWMGLUETZ,	12,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP1A,		12,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, GPIO4_11,	12,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_12,	12,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_13,	12,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_14,	12,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_0,		12,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_1,		12,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_2,		12,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_3,		12,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, AXR1_4,		13,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_5,		13,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_6,		13,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_7,		13,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_8,		13,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_9,		13,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_0,		13,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_1,		13,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, EQEP1B,		13,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM2B,		13,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM2A,		13,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM1B,		13,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM1A,		13,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_0,	13,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_1,	13,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_0,	13,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_1,	13,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO4_4,		13,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_5,		13,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_6,		13,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_7,		13,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_8,		13,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_9,		13,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_0,		13,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_1,		13,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_D_2,		14,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_3,		14,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_4,		14,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_5,		14,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_6,		14,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_7,		14,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_8,		14,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_9,		14,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, MMCSD_DAT_2,	14,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_3,	14,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_4,	14,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_5,	14,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_6,	14,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_7,	14,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_8,	14,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_9,	14,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_2,	14,	0,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_3,	14,	4,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_4,	14,	8,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_5,	14,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_6,	14,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_7,	14,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_8,		14,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_9,		14,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO0_2,		14,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_3,		14,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_4,		14,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_5,		14,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_6,		14,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_7,		14,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_8,		14,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_9,		14,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_D_10,	15,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_11,	15,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_12,	15,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_13,	15,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_14,	15,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_15,	15,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_0,		15,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_1,		15,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, UHPI_HD_10,	15,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_11,	15,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_12,	15,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_13,	15,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_14,	15,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_15,	15,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_7,		15,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_CLK,	15,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_10,	15,	0,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_11,	15,	4,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_12,	15,	8,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_13,	15,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_14,	15,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_15,	15,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HCNTL0,	15,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO0_10,	15,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_11,	15,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_12,	15,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_13,	15,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_14,	15,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_15,	15,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_0,		15,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_1,		15,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_A_2,		16,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_3,		16,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_4,		16,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_5,		16,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_6,		16,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_7,		16,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_8,		16,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_9,		16,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, MMCSD_CMD,	16,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_6,		16,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_3,		16,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_2,		16,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_1,		16,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_0,		16,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_PCLK,	16,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_HSYNC,	16,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HCNTL1,	16,	0,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO1_2,		16,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_3,		16,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_4,		16,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_5,		16,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_6,		16,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_7,		16,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_8,		16,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_9,		16,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_A_10,	17,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_11,	17,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_12,	17,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_BA_1,	17,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_BA_0,	17,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_CLK,		17,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_SDCKE,	17,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CAS,	17,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, LCD_VSYNC,	17,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, NLCD_AC_ENB_CS,	17,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_MCLK,	17,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_5,		17,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_4,		17,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, OBSCLK,		17,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, NEMA_CS_4,	17,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HHWIL,	17,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, AHCLKR2,		17,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO1_10,	17,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_11,	17,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_12,	17,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_13,	17,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_14,	17,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_15,	17,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_0,		17,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_1,		17,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, NEMA_RAS,	18,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_WE,		18,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CS_0,	18,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CS_2,	18,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CS_3,	18,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_OE,		18,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_WE_DQM_1,	18,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_WE_DQM_0,	18,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CS_5,	18,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HRNW,	18,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HAS,	18,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HCS,	18,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HDS1,	18,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HDS2,	18,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HINT,	18,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, AXR0_12,		18,	4,	0xf,	4,	false)
-	MUX_CFG(DA830, AMUTE2,		18,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR0_13,		18,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR0_14,		18,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR0_15,		18,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO2_2,		18,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_3,		18,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_4,		18,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_5,		18,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_6,		18,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_7,		18,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_8,		18,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_9,		18,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_WAIT_0,	19,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, NUHPI_HRDY,	19,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, GPIO2_10,	19,	0,	0xf,	8,	false)
-#endif
-};
-
-const short da830_emif25_pins[] __initconst = {
-	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
-	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
-	DA830_EMA_D_8, DA830_EMA_D_9, DA830_EMA_D_10, DA830_EMA_D_11,
-	DA830_EMA_D_12, DA830_EMA_D_13, DA830_EMA_D_14, DA830_EMA_D_15,
-	DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
-	DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
-	DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
-	DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_EMA_CLK,
-	DA830_EMA_SDCKE, DA830_NEMA_CS_4, DA830_NEMA_CS_5, DA830_NEMA_WE,
-	DA830_NEMA_CS_0, DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE,
-	DA830_NEMA_WE_DQM_1, DA830_NEMA_WE_DQM_0, DA830_EMA_WAIT_0,
-	-1
-};
-
-const short da830_spi0_pins[] __initconst = {
-	DA830_SPI0_SOMI_0, DA830_SPI0_SIMO_0, DA830_SPI0_CLK, DA830_NSPI0_ENA,
-	DA830_NSPI0_SCS_0,
-	-1
-};
-
-const short da830_spi1_pins[] __initconst = {
-	DA830_SPI1_SOMI_0, DA830_SPI1_SIMO_0, DA830_SPI1_CLK, DA830_NSPI1_ENA,
-	DA830_NSPI1_SCS_0,
-	-1
-};
-
-const short da830_mmc_sd_pins[] __initconst = {
-	DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
-	DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
-	DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
-	DA830_MMCSD_CMD,
-	-1
-};
-
-const short da830_uart0_pins[] __initconst = {
-	DA830_NUART0_CTS, DA830_NUART0_RTS, DA830_UART0_RXD, DA830_UART0_TXD,
-	-1
-};
-
-const short da830_uart1_pins[] __initconst = {
-	DA830_UART1_RXD, DA830_UART1_TXD,
-	-1
-};
-
-const short da830_uart2_pins[] __initconst = {
-	DA830_UART2_RXD, DA830_UART2_TXD,
-	-1
-};
-
-const short da830_usb20_pins[] __initconst = {
-	DA830_USB0_DRVVBUS, DA830_USB_REFCLKIN,
-	-1
-};
-
-const short da830_usb11_pins[] __initconst = {
-	DA830_USB_REFCLKIN,
-	-1
-};
-
-const short da830_uhpi_pins[] __initconst = {
-	DA830_UHPI_HD_0, DA830_UHPI_HD_1, DA830_UHPI_HD_2, DA830_UHPI_HD_3,
-	DA830_UHPI_HD_4, DA830_UHPI_HD_5, DA830_UHPI_HD_6, DA830_UHPI_HD_7,
-	DA830_UHPI_HD_8, DA830_UHPI_HD_9, DA830_UHPI_HD_10, DA830_UHPI_HD_11,
-	DA830_UHPI_HD_12, DA830_UHPI_HD_13, DA830_UHPI_HD_14, DA830_UHPI_HD_15,
-	DA830_UHPI_HCNTL0, DA830_UHPI_HCNTL1, DA830_UHPI_HHWIL, DA830_UHPI_HRNW,
-	DA830_NUHPI_HAS, DA830_NUHPI_HCS, DA830_NUHPI_HDS1, DA830_NUHPI_HDS2,
-	DA830_NUHPI_HINT, DA830_NUHPI_HRDY,
-	-1
-};
-
-const short da830_cpgmac_pins[] __initconst = {
-	DA830_RMII_TXD_0, DA830_RMII_TXD_1, DA830_RMII_TXEN, DA830_RMII_CRS_DV,
-	DA830_RMII_RXD_0, DA830_RMII_RXD_1, DA830_RMII_RXER, DA830_MDIO_CLK,
-	DA830_MDIO_D,
-	-1
-};
-
-const short da830_emif3c_pins[] __initconst = {
-	DA830_EMB_SDCKE, DA830_EMB_CLK_GLUE, DA830_EMB_CLK, DA830_NEMB_CS_0,
-	DA830_NEMB_CAS, DA830_NEMB_RAS, DA830_NEMB_WE, DA830_EMB_BA_1,
-	DA830_EMB_BA_0, DA830_EMB_A_0, DA830_EMB_A_1, DA830_EMB_A_2,
-	DA830_EMB_A_3, DA830_EMB_A_4, DA830_EMB_A_5, DA830_EMB_A_6,
-	DA830_EMB_A_7, DA830_EMB_A_8, DA830_EMB_A_9, DA830_EMB_A_10,
-	DA830_EMB_A_11, DA830_EMB_A_12, DA830_NEMB_WE_DQM_3,
-	DA830_NEMB_WE_DQM_2, DA830_EMB_D_0, DA830_EMB_D_1, DA830_EMB_D_2,
-	DA830_EMB_D_3, DA830_EMB_D_4, DA830_EMB_D_5, DA830_EMB_D_6,
-	DA830_EMB_D_7, DA830_EMB_D_8, DA830_EMB_D_9, DA830_EMB_D_10,
-	DA830_EMB_D_11, DA830_EMB_D_12, DA830_EMB_D_13, DA830_EMB_D_14,
-	DA830_EMB_D_15, DA830_EMB_D_16, DA830_EMB_D_17, DA830_EMB_D_18,
-	DA830_EMB_D_19, DA830_EMB_D_20, DA830_EMB_D_21, DA830_EMB_D_22,
-	DA830_EMB_D_23, DA830_EMB_D_24, DA830_EMB_D_25, DA830_EMB_D_26,
-	DA830_EMB_D_27, DA830_EMB_D_28, DA830_EMB_D_29, DA830_EMB_D_30,
-	DA830_EMB_D_31, DA830_NEMB_WE_DQM_1, DA830_NEMB_WE_DQM_0,
-	-1
-};
-
-const short da830_mcasp0_pins[] __initconst = {
-	DA830_AHCLKX0, DA830_ACLKX0, DA830_AFSX0,
-	DA830_AHCLKR0, DA830_ACLKR0, DA830_AFSR0, DA830_AMUTE0,
-	DA830_AXR0_0, DA830_AXR0_1, DA830_AXR0_2, DA830_AXR0_3,
-	DA830_AXR0_4, DA830_AXR0_5, DA830_AXR0_6, DA830_AXR0_7,
-	DA830_AXR0_8, DA830_AXR0_9, DA830_AXR0_10, DA830_AXR0_11,
-	DA830_AXR0_12, DA830_AXR0_13, DA830_AXR0_14, DA830_AXR0_15,
-	-1
-};
-
-const short da830_mcasp1_pins[] __initconst = {
-	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1,
-	DA830_AHCLKR1, DA830_ACLKR1, DA830_AFSR1, DA830_AMUTE1,
-	DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_3,
-	DA830_AXR1_4, DA830_AXR1_5, DA830_AXR1_6, DA830_AXR1_7,
-	DA830_AXR1_8, DA830_AXR1_9, DA830_AXR1_10, DA830_AXR1_11,
-	-1
-};
-
-const short da830_mcasp2_pins[] __initconst = {
-	DA830_AHCLKX2, DA830_ACLKX2, DA830_AFSX2,
-	DA830_AHCLKR2, DA830_ACLKR2, DA830_AFSR2, DA830_AMUTE2,
-	DA830_AXR2_0, DA830_AXR2_1, DA830_AXR2_2, DA830_AXR2_3,
-	-1
-};
-
-const short da830_i2c0_pins[] __initconst = {
-	DA830_I2C0_SDA, DA830_I2C0_SCL,
-	-1
-};
-
-const short da830_i2c1_pins[] __initconst = {
-	DA830_I2C1_SCL, DA830_I2C1_SDA,
-	-1
-};
-
-const short da830_lcdcntl_pins[] __initconst = {
-	DA830_LCD_D_0, DA830_LCD_D_1, DA830_LCD_D_2, DA830_LCD_D_3,
-	DA830_LCD_D_4, DA830_LCD_D_5, DA830_LCD_D_6, DA830_LCD_D_7,
-	DA830_LCD_D_8, DA830_LCD_D_9, DA830_LCD_D_10, DA830_LCD_D_11,
-	DA830_LCD_D_12, DA830_LCD_D_13, DA830_LCD_D_14, DA830_LCD_D_15,
-	DA830_LCD_PCLK, DA830_LCD_HSYNC, DA830_LCD_VSYNC, DA830_NLCD_AC_ENB_CS,
-	DA830_LCD_MCLK,
-	-1
-};
-
-const short da830_pwm_pins[] __initconst = {
-	DA830_ECAP0_APWM0, DA830_ECAP1_APWM1, DA830_EPWM0B, DA830_EPWM0A,
-	DA830_EPWMSYNCI, DA830_EPWMSYNC0, DA830_ECAP2_APWM2, DA830_EHRPWMGLUETZ,
-	DA830_EPWM2B, DA830_EPWM2A, DA830_EPWM1B, DA830_EPWM1A,
-	-1
-};
-
-const short da830_ecap0_pins[] __initconst = {
-	DA830_ECAP0_APWM0,
-	-1
-};
-
-const short da830_ecap1_pins[] __initconst = {
-	DA830_ECAP1_APWM1,
-	-1
-};
-
-const short da830_ecap2_pins[] __initconst = {
-	DA830_ECAP2_APWM2,
-	-1
-};
-
-const short da830_eqep0_pins[] __initconst = {
-	DA830_EQEP0I, DA830_EQEP0S, DA830_EQEP0A, DA830_EQEP0B,
-	-1
-};
-
-const short da830_eqep1_pins[] __initconst = {
-	DA830_EQEP1I, DA830_EQEP1S, DA830_EQEP1A, DA830_EQEP1B,
-	-1
-};
-
-static struct map_desc da830_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= DA8XX_CP_INTC_VIRT,
-		.pfn		= __phys_to_pfn(DA8XX_CP_INTC_BASE),
-		.length		= DA8XX_CP_INTC_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id da830_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb7df,
-		.manufacturer	= 0x017,	/* 0x02f >> 1 */
-		.cpu_id		= DAVINCI_CPU_ID_DA830,
-		.name		= "da830/omap-l137 rev1.0",
-	},
-	{
-		.variant	= 0x8,
-		.part_no	= 0xb7df,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DA830,
-		.name		= "da830/omap-l137 rev1.1",
-	},
-	{
-		.variant	= 0x9,
-		.part_no	= 0xb7df,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DA830,
-		.name		= "da830/omap-l137 rev2.0",
-	},
-};
-
-static struct davinci_gpio_platform_data da830_gpio_platform_data = {
-	.no_auto_base	= true,
-	.base		= 0,
-	.ngpio		= 128,
-};
-
-int __init da830_register_gpio(void)
-{
-	return da8xx_register_gpio(&da830_gpio_platform_data);
-}
-
-/*
- * Bottom half of timer0 is used both for clock even and clocksource.
- * Top half is used by DSP.
- */
-static const struct davinci_timer_cfg da830_timer_cfg = {
-	.reg = DEFINE_RES_IO(DA8XX_TIMER64P0_BASE, SZ_4K),
-	.irq = {
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_DA830_T12CMPINT0_0)),
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_DA8XX_TINT12_0)),
-	},
-	.cmp_off = DA830_CMP12_0,
-};
-
-static const struct davinci_soc_info davinci_soc_info_da830 = {
-	.io_desc		= da830_io_desc,
-	.io_desc_num		= ARRAY_SIZE(da830_io_desc),
-	.jtag_id_reg		= DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG,
-	.ids			= da830_ids,
-	.ids_num		= ARRAY_SIZE(da830_ids),
-	.pinmux_base		= DA8XX_SYSCFG0_BASE + 0x120,
-	.pinmux_pins		= da830_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(da830_pins),
-	.emac_pdata		= &da8xx_emac_pdata,
-};
-
-void __init da830_init(void)
-{
-	davinci_common_init(&davinci_soc_info_da830);
-
-	da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
-	WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module");
-}
-
-static const struct davinci_cp_intc_config da830_cp_intc_config = {
-	.reg = {
-		.start		= DA8XX_CP_INTC_BASE,
-		.end		= DA8XX_CP_INTC_BASE + SZ_8K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	.num_irqs		= DA830_N_CP_INTC_IRQ,
-};
-
-void __init da830_init_irq(void)
-{
-	davinci_cp_intc_init(&da830_cp_intc_config);
-}
-
-void __init da830_init_time(void)
-{
-	void __iomem *pll;
-	struct clk *clk;
-	int rv;
-
-	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA830_REF_FREQ);
-
-	pll = ioremap(DA8XX_PLL0_BASE, SZ_4K);
-
-	da830_pll_init(NULL, pll, NULL);
-
-	clk = clk_get(NULL, "timer0");
-	if (WARN_ON(IS_ERR(clk))) {
-		pr_err("Unable to get the timer clock\n");
-		return;
-	}
-
-	rv = davinci_timer_register(clk, &da830_timer_cfg);
-	WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-static struct resource da830_psc0_resources[] = {
-	{
-		.start	= DA8XX_PSC0_BASE,
-		.end	= DA8XX_PSC0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da830_psc0_device = {
-	.name		= "da830-psc0",
-	.id		= -1,
-	.resource	= da830_psc0_resources,
-	.num_resources	= ARRAY_SIZE(da830_psc0_resources),
-};
-
-static struct resource da830_psc1_resources[] = {
-	{
-		.start	= DA8XX_PSC1_BASE,
-		.end	= DA8XX_PSC1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da830_psc1_device = {
-	.name		= "da830-psc1",
-	.id		= -1,
-	.resource	= da830_psc1_resources,
-	.num_resources	= ARRAY_SIZE(da830_psc1_resources),
-};
-
-void __init da830_register_clocks(void)
-{
-	/* PLL is registered in da830_init_time() */
-	platform_device_register(&da830_psc0_device);
-	platform_device_register(&da830_psc1_device);
-}
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 635e88daf5dd..706f8241b5e7 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -4,25 +4,15 @@
  *
  * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/
  *
- * Derived from: arch/arm/mach-davinci/da830.c
  * Original Copyrights follow:
  *
  * 2009 (c) MontaVista Software, Inc.
  */
 
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/cpufreq.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/irqchip/irq-davinci-cp-intc.h>
 #include <linux/mfd/da8xx-cfgchip.h>
-#include <linux/platform_data/clk-da8xx-cfgchip.h>
-#include <linux/platform_data/clk-davinci-pll.h>
-#include <linux/platform_data/davinci-cpufreq.h>
-#include <linux/platform_data/gpio-davinci.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
@@ -33,6 +23,7 @@
 #include "common.h"
 #include "cputype.h"
 #include "da8xx.h"
+#include "hardware.h"
 #include "pm.h"
 #include "irqs.h"
 #include "mux.h"
@@ -258,45 +249,6 @@ static const struct mux_config da850_pins[] = {
 #endif
 };
 
-const short da850_i2c0_pins[] __initconst = {
-	DA850_I2C0_SDA, DA850_I2C0_SCL,
-	-1
-};
-
-const short da850_i2c1_pins[] __initconst = {
-	DA850_I2C1_SCL, DA850_I2C1_SDA,
-	-1
-};
-
-const short da850_lcdcntl_pins[] __initconst = {
-	DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3,
-	DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7,
-	DA850_LCD_D_8, DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11,
-	DA850_LCD_D_12, DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15,
-	DA850_LCD_PCLK, DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS,
-	-1
-};
-
-const short da850_vpif_capture_pins[] __initconst = {
-	DA850_VPIF_DIN0, DA850_VPIF_DIN1, DA850_VPIF_DIN2, DA850_VPIF_DIN3,
-	DA850_VPIF_DIN4, DA850_VPIF_DIN5, DA850_VPIF_DIN6, DA850_VPIF_DIN7,
-	DA850_VPIF_DIN8, DA850_VPIF_DIN9, DA850_VPIF_DIN10, DA850_VPIF_DIN11,
-	DA850_VPIF_DIN12, DA850_VPIF_DIN13, DA850_VPIF_DIN14, DA850_VPIF_DIN15,
-	DA850_VPIF_CLKIN0, DA850_VPIF_CLKIN1, DA850_VPIF_CLKIN2,
-	DA850_VPIF_CLKIN3,
-	-1
-};
-
-const short da850_vpif_display_pins[] __initconst = {
-	DA850_VPIF_DOUT0, DA850_VPIF_DOUT1, DA850_VPIF_DOUT2, DA850_VPIF_DOUT3,
-	DA850_VPIF_DOUT4, DA850_VPIF_DOUT5, DA850_VPIF_DOUT6, DA850_VPIF_DOUT7,
-	DA850_VPIF_DOUT8, DA850_VPIF_DOUT9, DA850_VPIF_DOUT10,
-	DA850_VPIF_DOUT11, DA850_VPIF_DOUT12, DA850_VPIF_DOUT13,
-	DA850_VPIF_DOUT14, DA850_VPIF_DOUT15, DA850_VPIF_CLKO2,
-	DA850_VPIF_CLKO3,
-	-1
-};
-
 static struct map_desc da850_io_desc[] = {
 	{
 		.virtual	= IO_VIRT,
@@ -330,204 +282,9 @@ static struct davinci_id da850_ids[] = {
 	},
 };
 
-/*
- * Bottom half of timer 0 is used for clock_event, top half for
- * clocksource.
- */
-static const struct davinci_timer_cfg da850_timer_cfg = {
-	.reg = DEFINE_RES_IO(DA8XX_TIMER64P0_BASE, SZ_4K),
-	.irq = {
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_DA8XX_TINT12_0)),
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_DA8XX_TINT34_0)),
-	},
-};
-
-#ifdef CONFIG_CPU_FREQ
-/*
- * Notes:
- * According to the TRM, minimum PLLM results in maximum power savings.
- * The OPP definitions below should keep the PLLM as low as possible.
- *
- * The output of the PLLM must be between 300 to 600 MHz.
- */
-struct da850_opp {
-	unsigned int	freq;	/* in KHz */
-	unsigned int	prediv;
-	unsigned int	mult;
-	unsigned int	postdiv;
-	unsigned int	cvdd_min; /* in uV */
-	unsigned int	cvdd_max; /* in uV */
-};
-
-static const struct da850_opp da850_opp_456 = {
-	.freq		= 456000,
-	.prediv		= 1,
-	.mult		= 19,
-	.postdiv	= 1,
-	.cvdd_min	= 1300000,
-	.cvdd_max	= 1350000,
-};
-
-static const struct da850_opp da850_opp_408 = {
-	.freq		= 408000,
-	.prediv		= 1,
-	.mult		= 17,
-	.postdiv	= 1,
-	.cvdd_min	= 1300000,
-	.cvdd_max	= 1350000,
-};
-
-static const struct da850_opp da850_opp_372 = {
-	.freq		= 372000,
-	.prediv		= 2,
-	.mult		= 31,
-	.postdiv	= 1,
-	.cvdd_min	= 1200000,
-	.cvdd_max	= 1320000,
-};
-
-static const struct da850_opp da850_opp_300 = {
-	.freq		= 300000,
-	.prediv		= 1,
-	.mult		= 25,
-	.postdiv	= 2,
-	.cvdd_min	= 1200000,
-	.cvdd_max	= 1320000,
-};
-
-static const struct da850_opp da850_opp_200 = {
-	.freq		= 200000,
-	.prediv		= 1,
-	.mult		= 25,
-	.postdiv	= 3,
-	.cvdd_min	= 1100000,
-	.cvdd_max	= 1160000,
-};
-
-static const struct da850_opp da850_opp_96 = {
-	.freq		= 96000,
-	.prediv		= 1,
-	.mult		= 20,
-	.postdiv	= 5,
-	.cvdd_min	= 1000000,
-	.cvdd_max	= 1050000,
-};
-
-#define OPP(freq) 		\
-	{				\
-		.driver_data = (unsigned int) &da850_opp_##freq,	\
-		.frequency = freq * 1000, \
-	}
-
-static struct cpufreq_frequency_table da850_freq_table[] = {
-	OPP(456),
-	OPP(408),
-	OPP(372),
-	OPP(300),
-	OPP(200),
-	OPP(96),
-	{
-		.driver_data		= 0,
-		.frequency	= CPUFREQ_TABLE_END,
-	},
-};
-
-#ifdef CONFIG_REGULATOR
-static int da850_set_voltage(unsigned int index);
-static int da850_regulator_init(void);
-#endif
-
-static struct davinci_cpufreq_config cpufreq_info = {
-	.freq_table = da850_freq_table,
-#ifdef CONFIG_REGULATOR
-	.init = da850_regulator_init,
-	.set_voltage = da850_set_voltage,
-#endif
-};
-
-#ifdef CONFIG_REGULATOR
-static struct regulator *cvdd;
-
-static int da850_set_voltage(unsigned int index)
-{
-	struct da850_opp *opp;
-
-	if (!cvdd)
-		return -ENODEV;
-
-	opp = (struct da850_opp *) cpufreq_info.freq_table[index].driver_data;
-
-	return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max);
-}
-
-static int da850_regulator_init(void)
-{
-	cvdd = regulator_get(NULL, "cvdd");
-	if (WARN(IS_ERR(cvdd), "Unable to obtain voltage regulator for CVDD;"
-					" voltage scaling unsupported\n")) {
-		return PTR_ERR(cvdd);
-	}
-
-	return 0;
-}
-#endif
-
-static struct platform_device da850_cpufreq_device = {
-	.name			= "cpufreq-davinci",
-	.dev = {
-		.platform_data	= &cpufreq_info,
-	},
-	.id = -1,
-};
-
-unsigned int da850_max_speed = 300000;
-
-int da850_register_cpufreq(char *async_clk)
-{
-	int i;
-
-	/* cpufreq driver can help keep an "async" clock constant */
-	if (async_clk)
-		clk_add_alias("async", da850_cpufreq_device.name,
-							async_clk, NULL);
-	for (i = 0; i < ARRAY_SIZE(da850_freq_table); i++) {
-		if (da850_freq_table[i].frequency <= da850_max_speed) {
-			cpufreq_info.freq_table = &da850_freq_table[i];
-			break;
-		}
-	}
-
-	return platform_device_register(&da850_cpufreq_device);
-}
-#else
-int __init da850_register_cpufreq(char *async_clk)
-{
-	return 0;
-}
-#endif
-
 /* VPIF resource, platform data */
 static u64 da850_vpif_dma_mask = DMA_BIT_MASK(32);
 
-static struct resource da850_vpif_resource[] = {
-	{
-		.start = DA8XX_VPIF_BASE,
-		.end   = DA8XX_VPIF_BASE + 0xfff,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device da850_vpif_dev = {
-	.name		= "vpif",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &da850_vpif_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= da850_vpif_resource,
-	.num_resources	= ARRAY_SIZE(da850_vpif_resource),
-};
-
 static struct resource da850_vpif_display_resource[] = {
 	{
 		.start = DAVINCI_INTC_IRQ(IRQ_DA850_VPIFINT),
@@ -571,11 +328,6 @@ static struct platform_device da850_vpif_capture_dev = {
 	.num_resources  = ARRAY_SIZE(da850_vpif_capture_resource),
 };
 
-int __init da850_register_vpif(void)
-{
-	return platform_device_register(&da850_vpif_dev);
-}
-
 int __init da850_register_vpif_display(struct vpif_display_config
 						*display_config)
 {
@@ -590,17 +342,6 @@ int __init da850_register_vpif_capture(struct vpif_capture_config
 	return platform_device_register(&da850_vpif_capture_dev);
 }
 
-static struct davinci_gpio_platform_data da850_gpio_platform_data = {
-	.no_auto_base	= true,
-	.base		= 0,
-	.ngpio		= 144,
-};
-
-int __init da850_register_gpio(void)
-{
-	return da8xx_register_gpio(&da850_gpio_platform_data);
-}
-
 static const struct davinci_soc_info davinci_soc_info_da850 = {
 	.io_desc		= da850_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da850_io_desc),
@@ -610,7 +351,6 @@ static const struct davinci_soc_info davinci_soc_info_da850 = {
 	.pinmux_base		= DA8XX_SYSCFG0_BASE + 0x120,
 	.pinmux_pins		= da850_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(da850_pins),
-	.emac_pdata		= &da8xx_emac_pdata,
 	.sram_dma		= DA8XX_SHARED_RAM_BASE,
 	.sram_len		= SZ_128K,
 };
@@ -626,142 +366,3 @@ void __init da850_init(void)
 	da8xx_syscfg1_base = ioremap(DA8XX_SYSCFG1_BASE, SZ_4K);
 	WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module");
 }
-
-static const struct davinci_cp_intc_config da850_cp_intc_config = {
-	.reg = {
-		.start		= DA8XX_CP_INTC_BASE,
-		.end		= DA8XX_CP_INTC_BASE + SZ_8K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	.num_irqs		= DA850_N_CP_INTC_IRQ,
-};
-
-void __init da850_init_irq(void)
-{
-	davinci_cp_intc_init(&da850_cp_intc_config);
-}
-
-void __init da850_init_time(void)
-{
-	void __iomem *pll0;
-	struct regmap *cfgchip;
-	struct clk *clk;
-	int rv;
-
-	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA850_REF_FREQ);
-
-	pll0 = ioremap(DA8XX_PLL0_BASE, SZ_4K);
-	cfgchip = da8xx_get_cfgchip();
-
-	da850_pll0_init(NULL, pll0, cfgchip);
-
-	clk = clk_get(NULL, "timer0");
-	if (WARN_ON(IS_ERR(clk))) {
-		pr_err("Unable to get the timer clock\n");
-		return;
-	}
-
-	rv = davinci_timer_register(clk, &da850_timer_cfg);
-	WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-static struct resource da850_pll1_resources[] = {
-	{
-		.start	= DA850_PLL1_BASE,
-		.end	= DA850_PLL1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct davinci_pll_platform_data da850_pll1_pdata;
-
-static struct platform_device da850_pll1_device = {
-	.name		= "da850-pll1",
-	.id		= -1,
-	.resource	= da850_pll1_resources,
-	.num_resources	= ARRAY_SIZE(da850_pll1_resources),
-	.dev		= {
-		.platform_data	= &da850_pll1_pdata,
-	},
-};
-
-static struct resource da850_psc0_resources[] = {
-	{
-		.start	= DA8XX_PSC0_BASE,
-		.end	= DA8XX_PSC0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da850_psc0_device = {
-	.name		= "da850-psc0",
-	.id		= -1,
-	.resource	= da850_psc0_resources,
-	.num_resources	= ARRAY_SIZE(da850_psc0_resources),
-};
-
-static struct resource da850_psc1_resources[] = {
-	{
-		.start	= DA8XX_PSC1_BASE,
-		.end	= DA8XX_PSC1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da850_psc1_device = {
-	.name		= "da850-psc1",
-	.id		= -1,
-	.resource	= da850_psc1_resources,
-	.num_resources	= ARRAY_SIZE(da850_psc1_resources),
-};
-
-static struct da8xx_cfgchip_clk_platform_data da850_async1_pdata;
-
-static struct platform_device da850_async1_clksrc_device = {
-	.name		= "da850-async1-clksrc",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &da850_async1_pdata,
-	},
-};
-
-static struct da8xx_cfgchip_clk_platform_data da850_async3_pdata;
-
-static struct platform_device da850_async3_clksrc_device = {
-	.name		= "da850-async3-clksrc",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &da850_async3_pdata,
-	},
-};
-
-static struct da8xx_cfgchip_clk_platform_data da850_tbclksync_pdata;
-
-static struct platform_device da850_tbclksync_device = {
-	.name		= "da830-tbclksync",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &da850_tbclksync_pdata,
-	},
-};
-
-void __init da850_register_clocks(void)
-{
-	/* PLL0 is registered in da850_init_time() */
-
-	da850_pll1_pdata.cfgchip = da8xx_get_cfgchip();
-	platform_device_register(&da850_pll1_device);
-
-	da850_async1_pdata.cfgchip = da8xx_get_cfgchip();
-	platform_device_register(&da850_async1_clksrc_device);
-
-	da850_async3_pdata.cfgchip = da8xx_get_cfgchip();
-	platform_device_register(&da850_async3_clksrc_device);
-
-	platform_device_register(&da850_psc0_device);
-
-	platform_device_register(&da850_psc1_device);
-
-	da850_tbclksync_pdata.cfgchip = da8xx_get_cfgchip();
-	platform_device_register(&da850_tbclksync_device);
-}
diff --git a/arch/arm/mach-davinci/da8xx.h b/arch/arm/mach-davinci/da8xx.h
index 382811dbbc3b..70d14f7f3520 100644
--- a/arch/arm/mach-davinci/da8xx.h
+++ b/arch/arm/mach-davinci/da8xx.h
@@ -9,39 +9,21 @@
 #ifndef __ASM_ARCH_DAVINCI_DA8XX_H
 #define __ASM_ARCH_DAVINCI_DA8XX_H
 
-#include <video/da8xx-fb.h>
-
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
-#include <linux/davinci_emac.h>
-#include <linux/spi/spi.h>
-#include <linux/platform_data/davinci_asp.h>
+#include <linux/videodev2.h>
 #include <linux/reboot.h>
 #include <linux/regmap.h>
-#include <linux/videodev2.h>
 
-#include "serial.h"
+#include "hardware.h"
 #include "pm.h"
 
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_data/uio_pruss.h>
-
 #include <media/davinci/vpif_types.h>
 
 extern void __iomem *da8xx_syscfg0_base;
 extern void __iomem *da8xx_syscfg1_base;
 
 /*
- * If the DA850/OMAP-L138/AM18x SoC on board is of a higher speed grade
- * (than the regular 300MHz variant), the board code should set this up
- * with the supported speed before calling da850_register_cpufreq().
- */
-extern unsigned int da850_max_speed;
-
-/*
  * The cp_intc interrupt controller for the da8xx isn't in the same
  * chunk of physical memory space as the other registers (like it is
  * on the davincis) so it needs to be mapped separately.  It will be
@@ -86,84 +68,13 @@ extern unsigned int da850_max_speed;
 #define DA8XX_SHARED_RAM_BASE	0x80000000
 #define DA8XX_ARM_RAM_BASE	0xffff0000
 
-void da830_init(void);
-void da830_init_irq(void);
-void da830_init_time(void);
-void da830_register_clocks(void);
-
 void da850_init(void);
-void da850_init_irq(void);
-void da850_init_time(void);
-void da850_register_clocks(void);
 
-int da830_register_edma(struct edma_rsv_info *rsv);
-int da850_register_edma(struct edma_rsv_info *rsv[2]);
-int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
-int da8xx_register_spi_bus(int instance, unsigned num_chipselect);
-int da8xx_register_watchdog(void);
-int da8xx_register_usb_phy(void);
-int da8xx_register_usb20(unsigned mA, unsigned potpgt);
-int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
-int da8xx_register_usb_phy_clocks(void);
-int da850_register_sata_refclk(int rate);
-int da8xx_register_emac(void);
-int da8xx_register_uio_pruss(void);
-int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata);
-int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
-int da850_register_mmcsd1(struct davinci_mmc_config *config);
-void da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
-int da8xx_register_rtc(void);
-int da8xx_register_gpio(void *pdata);
-int da850_register_cpufreq(char *async_clk);
-int da8xx_register_cpuidle(void);
-void __iomem *da8xx_get_mem_ctlr(void);
-int da850_register_sata(unsigned long refclkpn);
-int da850_register_vpif(void);
 int da850_register_vpif_display
 			(struct vpif_display_config *display_config);
 int da850_register_vpif_capture
 			(struct vpif_capture_config *capture_config);
-void da8xx_rproc_reserve_cma(void);
-int da8xx_register_rproc(void);
-int da850_register_gpio(void);
-int da830_register_gpio(void);
 struct regmap *da8xx_get_cfgchip(void);
-
-extern struct platform_device da8xx_serial_device[];
-extern struct emac_platform_data da8xx_emac_pdata;
-extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
-extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
-
-
-extern const short da830_emif25_pins[];
-extern const short da830_spi0_pins[];
-extern const short da830_spi1_pins[];
-extern const short da830_mmc_sd_pins[];
-extern const short da830_uart0_pins[];
-extern const short da830_uart1_pins[];
-extern const short da830_uart2_pins[];
-extern const short da830_usb20_pins[];
-extern const short da830_usb11_pins[];
-extern const short da830_uhpi_pins[];
-extern const short da830_cpgmac_pins[];
-extern const short da830_emif3c_pins[];
-extern const short da830_mcasp0_pins[];
-extern const short da830_mcasp1_pins[];
-extern const short da830_mcasp2_pins[];
-extern const short da830_i2c0_pins[];
-extern const short da830_i2c1_pins[];
-extern const short da830_lcdcntl_pins[];
-extern const short da830_pwm_pins[];
-extern const short da830_ecap0_pins[];
-extern const short da830_ecap1_pins[];
-extern const short da830_ecap2_pins[];
-extern const short da830_eqep0_pins[];
-extern const short da830_eqep1_pins[];
-extern const short da850_vpif_capture_pins[];
-extern const short da850_vpif_display_pins[];
-
-extern const short da850_i2c0_pins[];
-extern const short da850_i2c1_pins[];
-extern const short da850_lcdcntl_pins[];
+void __iomem *da8xx_get_mem_ctlr(void);
 
 #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
deleted file mode 100644
index b7172797692b..000000000000
--- a/arch/arm/mach-davinci/davinci.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * This file contains the processor specific definitions
- * of the TI DM644x, DM355, DM365, and DM646x.
- *
- * Copyright (C) 2011 Texas Instruments Incorporated
- * Copyright (c) 2007 Deep Root Systems, LLC
- */
-#ifndef __DAVINCI_H
-#define __DAVINCI_H
-
-#include <linux/clk.h>
-#include <linux/videodev2.h>
-#include <linux/davinci_emac.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/platform_data/davinci_asp.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/keyscan-davinci.h>
-
-#include "hardware.h"
-
-#include <media/davinci/vpfe_capture.h>
-#include <media/davinci/vpif_types.h>
-#include <media/davinci/vpss.h>
-#include <media/davinci/vpbe_types.h>
-#include <media/davinci/vpbe_venc.h>
-#include <media/davinci/vpbe.h>
-#include <media/davinci/vpbe_osd.h>
-
-#define DAVINCI_PLL1_BASE		0x01c40800
-#define DAVINCI_PLL2_BASE		0x01c40c00
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE	0x01c41000
-
-#define DAVINCI_SYSTEM_MODULE_BASE	0x01c40000
-#define SYSMOD_VDAC_CONFIG		0x2c
-#define SYSMOD_VIDCLKCTL		0x38
-#define SYSMOD_VPSS_CLKCTL		0x44
-#define SYSMOD_VDD3P3VPWDN		0x48
-#define SYSMOD_VSCLKDIS			0x6c
-#define SYSMOD_PUPDCTL1			0x7c
-
-/* VPSS CLKCTL bit definitions */
-#define VPSS_MUXSEL_EXTCLK_ENABLE	BIT(1)
-#define VPSS_VENCCLKEN_ENABLE		BIT(3)
-#define VPSS_DACCLKEN_ENABLE		BIT(4)
-#define VPSS_PLLC2SYSCLK5_ENABLE	BIT(5)
-
-extern void __iomem *davinci_sysmod_base;
-#define DAVINCI_SYSMOD_VIRT(x)	(davinci_sysmod_base + (x))
-void davinci_map_sysmod(void);
-
-#define DAVINCI_GPIO_BASE 0x01C67000
-int davinci_gpio_register(struct resource *res, int size, void *pdata);
-
-#define DAVINCI_TIMER0_BASE		(IO_PHYS + 0x21400)
-#define DAVINCI_WDOG_BASE		(IO_PHYS + 0x21C00)
-
-/* DM355 base addresses */
-#define DM355_ASYNC_EMIF_CONTROL_BASE	0x01e10000
-#define DM355_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
-
-#define ASP1_TX_EVT_EN	1
-#define ASP1_RX_EVT_EN	2
-
-/* DM365 base addresses */
-#define DM365_ASYNC_EMIF_CONTROL_BASE	0x01d10000
-#define DM365_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
-#define DM365_ASYNC_EMIF_DATA_CE1_BASE	0x04000000
-
-/* DM644x base addresses */
-#define DM644X_ASYNC_EMIF_CONTROL_BASE	0x01e00000
-#define DM644X_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
-#define DM644X_ASYNC_EMIF_DATA_CE1_BASE 0x04000000
-#define DM644X_ASYNC_EMIF_DATA_CE2_BASE 0x06000000
-#define DM644X_ASYNC_EMIF_DATA_CE3_BASE 0x08000000
-
-/* DM646x base addresses */
-#define DM646X_ASYNC_EMIF_CONTROL_BASE	0x20008000
-#define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000
-
-int davinci_init_wdt(void);
-
-/* DM355 function declarations */
-void dm355_init(void);
-void dm355_init_time(void);
-void dm355_init_irq(void);
-void dm355_register_clocks(void);
-void dm355_init_spi0(unsigned chipselect_mask,
-		const struct spi_board_info *info, unsigned len);
-void dm355_init_asp1(u32 evt_enable);
-int dm355_init_video(struct vpfe_config *, struct vpbe_config *);
-int dm355_gpio_register(void);
-
-/* DM365 function declarations */
-void dm365_init(void);
-void dm365_init_irq(void);
-void dm365_init_time(void);
-void dm365_register_clocks(void);
-void dm365_init_asp(void);
-void dm365_init_vc(void);
-void dm365_init_ks(struct davinci_ks_platform_data *pdata);
-void dm365_init_rtc(void);
-void dm365_init_spi0(unsigned chipselect_mask,
-			const struct spi_board_info *info, unsigned len);
-int dm365_init_video(struct vpfe_config *, struct vpbe_config *);
-int dm365_gpio_register(void);
-
-/* DM644x function declarations */
-void dm644x_init(void);
-void dm644x_init_irq(void);
-void dm644x_init_devices(void);
-void dm644x_init_time(void);
-void dm644x_register_clocks(void);
-void dm644x_init_asp(void);
-int dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
-int dm644x_gpio_register(void);
-
-/* DM646x function declarations */
-void dm646x_init(void);
-void dm646x_init_irq(void);
-void dm646x_init_time(unsigned long ref_clk_rate, unsigned long aux_clkin_rate);
-void dm646x_register_clocks(void);
-void dm646x_init_mcasp0(struct snd_platform_data *pdata);
-void dm646x_init_mcasp1(struct snd_platform_data *pdata);
-int dm646x_init_edma(struct edma_rsv_info *rsv);
-void dm646x_video_init(void);
-void dm646x_setup_vpif(struct vpif_display_config *,
-		       struct vpif_capture_config *);
-int dm646x_gpio_register(void);
-
-extern struct platform_device dm365_serial_device[];
-extern struct platform_device dm355_serial_device[];
-extern struct platform_device dm644x_serial_device[];
-extern struct platform_device dm646x_serial_device[];
-#endif /*__DAVINCI_H */
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index ef9593558e5f..4e9ac55ae92d 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -21,8 +21,6 @@
 #include "common.h"
 #include "cputype.h"
 #include "da8xx.h"
-#include "asp.h"
-#include "cpuidle.h"
 #include "irqs.h"
 #include "sram.h"
 
@@ -35,7 +33,6 @@
 #define DA8XX_PRUSS_MEM_BASE		0x01c30000
 #define DA8XX_MMCSD0_BASE		0x01c40000
 #define DA8XX_SPI0_BASE			0x01c41000
-#define DA830_SPI1_BASE			0x01e12000
 #define DA8XX_LCD_CNTRL_BASE		0x01e13000
 #define DA850_SATA_BASE			0x01e18000
 #define DA850_MMCSD1_BASE		0x01e1b000
@@ -57,911 +54,6 @@
 void __iomem *da8xx_syscfg0_base;
 void __iomem *da8xx_syscfg1_base;
 
-static struct plat_serial8250_port da8xx_serial0_pdata[] = {
-	{
-		.mapbase	= DA8XX_UART0_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_DA8XX_UARTINT0),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-					UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port da8xx_serial1_pdata[] = {
-	{
-		.mapbase	= DA8XX_UART1_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_DA8XX_UARTINT1),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-					UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port da8xx_serial2_pdata[] = {
-	{
-		.mapbase	= DA8XX_UART2_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_DA8XX_UARTINT2),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-					UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-
-struct platform_device da8xx_serial_device[] = {
-	{
-		.name	= "serial8250",
-		.id	= PLAT8250_DEV_PLATFORM,
-		.dev	= {
-			.platform_data	= da8xx_serial0_pdata,
-		}
-	},
-	{
-		.name	= "serial8250",
-		.id	= PLAT8250_DEV_PLATFORM1,
-		.dev	= {
-			.platform_data	= da8xx_serial1_pdata,
-		}
-	},
-	{
-		.name	= "serial8250",
-		.id	= PLAT8250_DEV_PLATFORM2,
-		.dev	= {
-			.platform_data	= da8xx_serial2_pdata,
-		}
-	},
-	{
-	}
-};
-
-static s8 da8xx_queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{1, 7},
-	{-1, -1}
-};
-
-static s8 da850_queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{-1, -1}
-};
-
-static struct edma_soc_info da8xx_edma0_pdata = {
-	.queue_priority_mapping	= da8xx_queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
-};
-
-static struct edma_soc_info da850_edma1_pdata = {
-	.queue_priority_mapping	= da850_queue_priority_mapping,
-	.default_queue		= EVENTQ_0,
-};
-
-static struct resource da8xx_edma0_resources[] = {
-	{
-		.name	= "edma3_cc",
-		.start	= DA8XX_TPCC_BASE,
-		.end	= DA8XX_TPCC_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc0",
-		.start	= DA8XX_TPTC0_BASE,
-		.end	= DA8XX_TPTC0_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc1",
-		.start	= DA8XX_TPTC1_BASE,
-		.end	= DA8XX_TPTC1_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_ccint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_CCINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma3_ccerrint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_CCERRINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource da850_edma1_resources[] = {
-	{
-		.name	= "edma3_cc",
-		.start	= DA850_TPCC1_BASE,
-		.end	= DA850_TPCC1_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc0",
-		.start	= DA850_TPTC2_BASE,
-		.end	= DA850_TPTC2_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_ccint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA850_CCINT1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma3_ccerrint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA850_CCERRINT1),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct platform_device_info da8xx_edma0_device __initconst = {
-	.name		= "edma",
-	.id		= 0,
-	.dma_mask	= DMA_BIT_MASK(32),
-	.res		= da8xx_edma0_resources,
-	.num_res	= ARRAY_SIZE(da8xx_edma0_resources),
-	.data		= &da8xx_edma0_pdata,
-	.size_data	= sizeof(da8xx_edma0_pdata),
-};
-
-static const struct platform_device_info da850_edma1_device __initconst = {
-	.name		= "edma",
-	.id		= 1,
-	.dma_mask	= DMA_BIT_MASK(32),
-	.res		= da850_edma1_resources,
-	.num_res	= ARRAY_SIZE(da850_edma1_resources),
-	.data		= &da850_edma1_pdata,
-	.size_data	= sizeof(da850_edma1_pdata),
-};
-
-static const struct dma_slave_map da830_edma_map[] = {
-	{ "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) },
-	{ "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) },
-	{ "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) },
-	{ "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) },
-	{ "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) },
-	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) },
-	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) },
-	{ "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) },
-	{ "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) },
-	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) },
-	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) },
-};
-
-int __init da830_register_edma(struct edma_rsv_info *rsv)
-{
-	struct platform_device *edma_pdev;
-
-	da8xx_edma0_pdata.rsv = rsv;
-
-	da8xx_edma0_pdata.slave_map = da830_edma_map;
-	da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map);
-
-	edma_pdev = platform_device_register_full(&da8xx_edma0_device);
-	return PTR_ERR_OR_ZERO(edma_pdev);
-}
-
-static const struct dma_slave_map da850_edma0_map[] = {
-	{ "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) },
-	{ "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) },
-	{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 3) },
-	{ "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 4) },
-	{ "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 5) },
-	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) },
-	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) },
-	{ "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) },
-	{ "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) },
-	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) },
-	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) },
-};
-
-static const struct dma_slave_map da850_edma1_map[] = {
-	{ "da830-mmc.1", "rx", EDMA_FILTER_PARAM(1, 28) },
-	{ "da830-mmc.1", "tx", EDMA_FILTER_PARAM(1, 29) },
-};
-
-int __init da850_register_edma(struct edma_rsv_info *rsv[2])
-{
-	struct platform_device *edma_pdev;
-
-	if (rsv) {
-		da8xx_edma0_pdata.rsv = rsv[0];
-		da850_edma1_pdata.rsv = rsv[1];
-	}
-
-	da8xx_edma0_pdata.slave_map = da850_edma0_map;
-	da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da850_edma0_map);
-
-	edma_pdev = platform_device_register_full(&da8xx_edma0_device);
-	if (IS_ERR(edma_pdev)) {
-		pr_warn("%s: Failed to register eDMA0\n", __func__);
-		return PTR_ERR(edma_pdev);
-	}
-
-	da850_edma1_pdata.slave_map = da850_edma1_map;
-	da850_edma1_pdata.slavecnt = ARRAY_SIZE(da850_edma1_map);
-
-	edma_pdev = platform_device_register_full(&da850_edma1_device);
-	return PTR_ERR_OR_ZERO(edma_pdev);
-}
-
-static struct resource da8xx_i2c_resources0[] = {
-	{
-		.start	= DA8XX_I2C0_BASE,
-		.end	= DA8XX_I2C0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_I2CINT0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_I2CINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_i2c_device0 = {
-	.name		= "i2c_davinci",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(da8xx_i2c_resources0),
-	.resource	= da8xx_i2c_resources0,
-};
-
-static struct resource da8xx_i2c_resources1[] = {
-	{
-		.start	= DA8XX_I2C1_BASE,
-		.end	= DA8XX_I2C1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_I2CINT1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_I2CINT1),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_i2c_device1 = {
-	.name		= "i2c_davinci",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(da8xx_i2c_resources1),
-	.resource	= da8xx_i2c_resources1,
-};
-
-int __init da8xx_register_i2c(int instance,
-		struct davinci_i2c_platform_data *pdata)
-{
-	struct platform_device *pdev;
-
-	if (instance == 0)
-		pdev = &da8xx_i2c_device0;
-	else if (instance == 1)
-		pdev = &da8xx_i2c_device1;
-	else
-		return -EINVAL;
-
-	pdev->dev.platform_data = pdata;
-	return platform_device_register(pdev);
-}
-
-static struct resource da8xx_watchdog_resources[] = {
-	{
-		.start	= DA8XX_WDOG_BASE,
-		.end	= DA8XX_WDOG_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da8xx_wdt_device = {
-	.name		= "davinci-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(da8xx_watchdog_resources),
-	.resource	= da8xx_watchdog_resources,
-};
-
-int __init da8xx_register_watchdog(void)
-{
-	return platform_device_register(&da8xx_wdt_device);
-}
-
-static struct resource da8xx_emac_resources[] = {
-	{
-		.start	= DA8XX_EMAC_CPPI_PORT_BASE,
-		.end	= DA8XX_EMAC_CPPI_PORT_BASE + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_RX_THRESH_PULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_RX_THRESH_PULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_RX_PULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_RX_PULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_TX_PULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_TX_PULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_MISC_PULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_MISC_PULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct emac_platform_data da8xx_emac_pdata = {
-	.ctrl_reg_offset	= DA8XX_EMAC_CTRL_REG_OFFSET,
-	.ctrl_mod_reg_offset	= DA8XX_EMAC_MOD_REG_OFFSET,
-	.ctrl_ram_offset	= DA8XX_EMAC_RAM_OFFSET,
-	.ctrl_ram_size		= DA8XX_EMAC_CTRL_RAM_SIZE,
-	.version		= EMAC_VERSION_2,
-};
-
-static struct platform_device da8xx_emac_device = {
-	.name		= "davinci_emac",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &da8xx_emac_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(da8xx_emac_resources),
-	.resource	= da8xx_emac_resources,
-};
-
-static struct resource da8xx_mdio_resources[] = {
-	{
-		.start	= DA8XX_EMAC_MDIO_BASE,
-		.end	= DA8XX_EMAC_MDIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da8xx_mdio_device = {
-	.name		= "davinci_mdio",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(da8xx_mdio_resources),
-	.resource	= da8xx_mdio_resources,
-};
-
-int __init da8xx_register_emac(void)
-{
-	int ret;
-
-	ret = platform_device_register(&da8xx_mdio_device);
-	if (ret < 0)
-		return ret;
-
-	return platform_device_register(&da8xx_emac_device);
-}
-
-static struct resource da830_mcasp1_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_DA830_MCASP1_REG_BASE,
-		.end	= DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* TX event */
-	{
-		.name	= "tx",
-		.start	= DAVINCI_DA830_DMA_MCASP1_AXEVT,
-		.end	= DAVINCI_DA830_DMA_MCASP1_AXEVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	/* RX event */
-	{
-		.name	= "rx",
-		.start	= DAVINCI_DA830_DMA_MCASP1_AREVT,
-		.end	= DAVINCI_DA830_DMA_MCASP1_AREVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.name	= "common",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_MCASPINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da830_mcasp1_device = {
-	.name		= "davinci-mcasp",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(da830_mcasp1_resources),
-	.resource	= da830_mcasp1_resources,
-};
-
-static struct resource da830_mcasp2_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_DA830_MCASP2_REG_BASE,
-		.end	= DAVINCI_DA830_MCASP2_REG_BASE + (SZ_1K * 12) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* TX event */
-	{
-		.name	= "tx",
-		.start	= DAVINCI_DA830_DMA_MCASP2_AXEVT,
-		.end	= DAVINCI_DA830_DMA_MCASP2_AXEVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	/* RX event */
-	{
-		.name	= "rx",
-		.start	= DAVINCI_DA830_DMA_MCASP2_AREVT,
-		.end	= DAVINCI_DA830_DMA_MCASP2_AREVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.name	= "common",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_MCASPINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da830_mcasp2_device = {
-	.name		= "davinci-mcasp",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(da830_mcasp2_resources),
-	.resource	= da830_mcasp2_resources,
-};
-
-static struct resource da850_mcasp_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_DA8XX_MCASP0_REG_BASE,
-		.end	= DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* TX event */
-	{
-		.name	= "tx",
-		.start	= DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
-		.end	= DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	/* RX event */
-	{
-		.name	= "rx",
-		.start	= DAVINCI_DA8XX_DMA_MCASP0_AREVT,
-		.end	= DAVINCI_DA8XX_DMA_MCASP0_AREVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.name	= "common",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_MCASPINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da850_mcasp_device = {
-	.name		= "davinci-mcasp",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(da850_mcasp_resources),
-	.resource	= da850_mcasp_resources,
-};
-
-void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
-{
-	struct platform_device *pdev;
-
-	switch (id) {
-	case 0:
-		/* Valid for DA830/OMAP-L137 or DA850/OMAP-L138 */
-		pdev = &da850_mcasp_device;
-		break;
-	case 1:
-		/* Valid for DA830/OMAP-L137 only */
-		if (!cpu_is_davinci_da830())
-			return;
-		pdev = &da830_mcasp1_device;
-		break;
-	case 2:
-		/* Valid for DA830/OMAP-L137 only */
-		if (!cpu_is_davinci_da830())
-			return;
-		pdev = &da830_mcasp2_device;
-		break;
-	default:
-		return;
-	}
-
-	pdev->dev.platform_data = pdata;
-	platform_device_register(pdev);
-}
-
-static struct resource da8xx_pruss_resources[] = {
-	{
-		.start	= DA8XX_PRUSS_MEM_BASE,
-		.end	= DA8XX_PRUSS_MEM_BASE + 0xFFFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT2),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT2),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT3),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT3),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT4),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT4),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT5),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT5),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT6),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT6),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT7),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT7),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct uio_pruss_pdata da8xx_uio_pruss_pdata = {
-	.pintc_base	= 0x4000,
-};
-
-static struct platform_device da8xx_uio_pruss_dev = {
-	.name		= "pruss_uio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(da8xx_pruss_resources),
-	.resource	= da8xx_pruss_resources,
-	.dev		= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &da8xx_uio_pruss_pdata,
-	}
-};
-
-int __init da8xx_register_uio_pruss(void)
-{
-	da8xx_uio_pruss_pdata.sram_pool = sram_get_gen_pool();
-	return platform_device_register(&da8xx_uio_pruss_dev);
-}
-
-static struct lcd_ctrl_config lcd_cfg = {
-	.panel_shade		= COLOR_ACTIVE,
-	.bpp			= 16,
-};
-
-struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata = {
-	.manu_name		= "sharp",
-	.controller_data	= &lcd_cfg,
-	.type			= "Sharp_LCD035Q3DG01",
-};
-
-struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata = {
-	.manu_name		= "sharp",
-	.controller_data	= &lcd_cfg,
-	.type			= "Sharp_LK043T1DG01",
-};
-
-static struct resource da8xx_lcdc_resources[] = {
-	[0] = { /* registers */
-		.start  = DA8XX_LCD_CNTRL_BASE,
-		.end    = DA8XX_LCD_CNTRL_BASE + SZ_4K - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = { /* interrupt */
-		.start  = DAVINCI_INTC_IRQ(IRQ_DA8XX_LCDINT),
-		.end    = DAVINCI_INTC_IRQ(IRQ_DA8XX_LCDINT),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_lcdc_device = {
-	.name		= "da8xx_lcdc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(da8xx_lcdc_resources),
-	.resource	= da8xx_lcdc_resources,
-	.dev		= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata)
-{
-	da8xx_lcdc_device.dev.platform_data = pdata;
-	return platform_device_register(&da8xx_lcdc_device);
-}
-
-static struct resource da8xx_gpio_resources[] = {
-	{ /* registers */
-		.start	= DA8XX_GPIO_BASE,
-		.end	= DA8XX_GPIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{ /* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO2),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO2),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO3),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO3),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO4),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO4),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO5),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO5),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO6),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO6),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO7),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO7),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO8),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO8),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_gpio_device = {
-	.name		= "davinci_gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(da8xx_gpio_resources),
-	.resource	= da8xx_gpio_resources,
-};
-
-int __init da8xx_register_gpio(void *pdata)
-{
-	da8xx_gpio_device.dev.platform_data = pdata;
-	return platform_device_register(&da8xx_gpio_device);
-}
-
-static struct resource da8xx_mmcsd0_resources[] = {
-	{		/* registers */
-		.start	= DA8XX_MMCSD0_BASE,
-		.end	= DA8XX_MMCSD0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{		/* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_MMCSDINT0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_MMCSDINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_mmcsd0_device = {
-	.name		= "da830-mmc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(da8xx_mmcsd0_resources),
-	.resource	= da8xx_mmcsd0_resources,
-};
-
-int __init da8xx_register_mmcsd0(struct davinci_mmc_config *config)
-{
-	da8xx_mmcsd0_device.dev.platform_data = config;
-	return platform_device_register(&da8xx_mmcsd0_device);
-}
-
-#ifdef CONFIG_ARCH_DAVINCI_DA850
-static struct resource da850_mmcsd1_resources[] = {
-	{		/* registers */
-		.start	= DA850_MMCSD1_BASE,
-		.end	= DA850_MMCSD1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{		/* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA850_MMCSDINT0_1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA850_MMCSDINT0_1),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da850_mmcsd1_device = {
-	.name		= "da830-mmc",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(da850_mmcsd1_resources),
-	.resource	= da850_mmcsd1_resources,
-};
-
-int __init da850_register_mmcsd1(struct davinci_mmc_config *config)
-{
-	da850_mmcsd1_device.dev.platform_data = config;
-	return platform_device_register(&da850_mmcsd1_device);
-}
-#endif
-
-static struct resource da8xx_rproc_resources[] = {
-	{ /* DSP boot address */
-		.name		= "host1cfg",
-		.start		= DA8XX_SYSCFG0_BASE + DA8XX_HOST1CFG_REG,
-		.end		= DA8XX_SYSCFG0_BASE + DA8XX_HOST1CFG_REG + 3,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* DSP interrupt registers */
-		.name		= "chipsig",
-		.start		= DA8XX_SYSCFG0_BASE + DA8XX_CHIPSIG_REG,
-		.end		= DA8XX_SYSCFG0_BASE + DA8XX_CHIPSIG_REG + 7,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* DSP L2 RAM */
-		.name		= "l2sram",
-		.start		= DA8XX_DSP_L2_RAM_BASE,
-		.end		= DA8XX_DSP_L2_RAM_BASE + SZ_256K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* DSP L1P RAM */
-		.name		= "l1pram",
-		.start		= DA8XX_DSP_L1P_RAM_BASE,
-		.end		= DA8XX_DSP_L1P_RAM_BASE + SZ_32K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* DSP L1D RAM */
-		.name		= "l1dram",
-		.start		= DA8XX_DSP_L1D_RAM_BASE,
-		.end		= DA8XX_DSP_L1D_RAM_BASE + SZ_32K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* dsp irq */
-		.start		= DAVINCI_INTC_IRQ(IRQ_DA8XX_CHIPINT0),
-		.end		= DAVINCI_INTC_IRQ(IRQ_DA8XX_CHIPINT0),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_dsp = {
-	.name	= "davinci-rproc",
-	.dev	= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(da8xx_rproc_resources),
-	.resource	= da8xx_rproc_resources,
-};
-
-static bool rproc_mem_inited __initdata;
-
-#if IS_ENABLED(CONFIG_DA8XX_REMOTEPROC)
-
-static phys_addr_t rproc_base __initdata;
-static unsigned long rproc_size __initdata;
-
-static int __init early_rproc_mem(char *p)
-{
-	char *endp;
-
-	if (p == NULL)
-		return 0;
-
-	rproc_size = memparse(p, &endp);
-	if (*endp == '@')
-		rproc_base = memparse(endp + 1, NULL);
-
-	return 0;
-}
-early_param("rproc_mem", early_rproc_mem);
-
-void __init da8xx_rproc_reserve_cma(void)
-{
-	struct cma *cma;
-	int ret;
-
-	if (!rproc_base || !rproc_size) {
-		pr_err("%s: 'rproc_mem=nn@address' badly specified\n"
-		       "    'nn' and 'address' must both be non-zero\n",
-		       __func__);
-
-		return;
-	}
-
-	pr_info("%s: reserving 0x%lx @ 0x%lx...\n",
-		__func__, rproc_size, (unsigned long)rproc_base);
-
-	ret = dma_contiguous_reserve_area(rproc_size, rproc_base, 0, &cma,
-			true);
-	if (ret) {
-		pr_err("%s: dma_contiguous_reserve_area failed %d\n",
-			__func__, ret);
-		return;
-	}
-	da8xx_dsp.dev.cma_area = cma;
-	rproc_mem_inited = true;
-}
-#else
-
-void __init da8xx_rproc_reserve_cma(void)
-{
-}
-
-#endif
-
-int __init da8xx_register_rproc(void)
-{
-	int ret;
-
-	if (!rproc_mem_inited) {
-		pr_warn("%s: memory not reserved for DSP, not registering DSP device\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	ret = platform_device_register(&da8xx_dsp);
-	if (ret)
-		pr_err("%s: can't register DSP device: %d\n", __func__, ret);
-
-	return ret;
-};
-
-static struct resource da8xx_rtc_resources[] = {
-	{
-		.start		= DA8XX_RTC_BASE,
-		.end		= DA8XX_RTC_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* timer irq */
-		.start		= DAVINCI_INTC_IRQ(IRQ_DA8XX_RTC),
-		.end		= DAVINCI_INTC_IRQ(IRQ_DA8XX_RTC),
-		.flags		= IORESOURCE_IRQ,
-	},
-	{ /* alarm irq */
-		.start		= DAVINCI_INTC_IRQ(IRQ_DA8XX_RTC),
-		.end		= DAVINCI_INTC_IRQ(IRQ_DA8XX_RTC),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_rtc_device = {
-	.name           = "da830-rtc",
-	.id             = -1,
-	.num_resources	= ARRAY_SIZE(da8xx_rtc_resources),
-	.resource	= da8xx_rtc_resources,
-};
-
-int da8xx_register_rtc(void)
-{
-	return platform_device_register(&da8xx_rtc_device);
-}
-
 static void __iomem *da8xx_ddr2_ctlr_base;
 void __iomem * __init da8xx_get_mem_ctlr(void)
 {
@@ -974,192 +66,3 @@ void __iomem * __init da8xx_get_mem_ctlr(void)
 
 	return da8xx_ddr2_ctlr_base;
 }
-
-static struct resource da8xx_cpuidle_resources[] = {
-	{
-		.start		= DA8XX_DDR2_CTL_BASE,
-		.end		= DA8XX_DDR2_CTL_BASE + SZ_32K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-/* DA8XX devices support DDR2 power down */
-static struct davinci_cpuidle_config da8xx_cpuidle_pdata = {
-	.ddr2_pdown	= 1,
-};
-
-
-static struct platform_device da8xx_cpuidle_device = {
-	.name			= "cpuidle-davinci",
-	.num_resources		= ARRAY_SIZE(da8xx_cpuidle_resources),
-	.resource		= da8xx_cpuidle_resources,
-	.dev = {
-		.platform_data	= &da8xx_cpuidle_pdata,
-	},
-};
-
-int __init da8xx_register_cpuidle(void)
-{
-	da8xx_cpuidle_pdata.ddr2_ctlr_base = da8xx_get_mem_ctlr();
-
-	return platform_device_register(&da8xx_cpuidle_device);
-}
-
-static struct resource da8xx_spi0_resources[] = {
-	[0] = {
-		.start	= DA8XX_SPI0_BASE,
-		.end	= DA8XX_SPI0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_SPINT0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_SPINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource da8xx_spi1_resources[] = {
-	[0] = {
-		.start	= DA830_SPI1_BASE,
-		.end	= DA830_SPI1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_SPINT1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_SPINT1),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_spi_platform_data da8xx_spi_pdata[] = {
-	[0] = {
-		.version	= SPI_VERSION_2,
-		.intr_line	= 1,
-		.dma_event_q	= EVENTQ_0,
-		.prescaler_limit = 2,
-	},
-	[1] = {
-		.version	= SPI_VERSION_2,
-		.intr_line	= 1,
-		.dma_event_q	= EVENTQ_0,
-		.prescaler_limit = 2,
-	},
-};
-
-static struct platform_device da8xx_spi_device[] = {
-	[0] = {
-		.name		= "spi_davinci",
-		.id		= 0,
-		.num_resources	= ARRAY_SIZE(da8xx_spi0_resources),
-		.resource	= da8xx_spi0_resources,
-		.dev		= {
-			.platform_data = &da8xx_spi_pdata[0],
-		},
-	},
-	[1] = {
-		.name		= "spi_davinci",
-		.id		= 1,
-		.num_resources	= ARRAY_SIZE(da8xx_spi1_resources),
-		.resource	= da8xx_spi1_resources,
-		.dev		= {
-			.platform_data = &da8xx_spi_pdata[1],
-		},
-	},
-};
-
-int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect)
-{
-	if (instance < 0 || instance > 1)
-		return -EINVAL;
-
-	da8xx_spi_pdata[instance].num_chipselect = num_chipselect;
-
-	if (instance == 1 && cpu_is_davinci_da850()) {
-		da8xx_spi1_resources[0].start = DA850_SPI1_BASE;
-		da8xx_spi1_resources[0].end = DA850_SPI1_BASE + SZ_4K - 1;
-	}
-
-	return platform_device_register(&da8xx_spi_device[instance]);
-}
-
-#ifdef CONFIG_ARCH_DAVINCI_DA850
-int __init da850_register_sata_refclk(int rate)
-{
-	struct clk *clk;
-
-	clk = clk_register_fixed_rate(NULL, "sata_refclk", NULL, 0, rate);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
-
-	return clk_register_clkdev(clk, "refclk", "ahci_da850");
-}
-
-static struct resource da850_sata_resources[] = {
-	{
-		.start	= DA850_SATA_BASE,
-		.end	= DA850_SATA_BASE + 0x1fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG,
-		.end	= DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG + 0x3,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA850_SATAINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 da850_sata_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device da850_sata_device = {
-	.name	= "ahci_da850",
-	.id	= -1,
-	.dev	= {
-		.dma_mask		= &da850_sata_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(da850_sata_resources),
-	.resource	= da850_sata_resources,
-};
-
-int __init da850_register_sata(unsigned long refclkpn)
-{
-	int ret;
-
-	ret = da850_register_sata_refclk(refclkpn);
-	if (ret)
-		return ret;
-
-	return platform_device_register(&da850_sata_device);
-}
-#endif
-
-static struct regmap *da8xx_cfgchip;
-
-static const struct regmap_config da8xx_cfgchip_config __initconst = {
-	.name		= "cfgchip",
-	.reg_bits	= 32,
-	.val_bits	= 32,
-	.reg_stride	= 4,
-	.max_register	= DA8XX_CFGCHIP4_REG - DA8XX_CFGCHIP0_REG,
-};
-
-/**
- * da8xx_get_cfgchip - Lazy gets CFGCHIP as regmap
- *
- * This is for use on non-DT boards only. For DT boards, use
- * syscon_regmap_lookup_by_compatible("ti,da830-cfgchip")
- *
- * Returns: Pointer to the CFGCHIP regmap or negative error code.
- */
-struct regmap * __init da8xx_get_cfgchip(void)
-{
-	if (IS_ERR_OR_NULL(da8xx_cfgchip))
-		da8xx_cfgchip = regmap_init_mmio(NULL,
-					DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG),
-					&da8xx_cfgchip_config);
-
-	return da8xx_cfgchip;
-}
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
deleted file mode 100644
index 199c26d9a2b6..000000000000
--- a/arch/arm/mach-davinci/devices.c
+++ /dev/null
@@ -1,303 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * mach-davinci/devices.c
- *
- * DaVinci platform device setup/initialization
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/edma.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-
-#include "hardware.h"
-#include "cputype.h"
-#include "mux.h"
-#include "davinci.h"
-#include "irqs.h"
-
-#define DAVINCI_I2C_BASE	     0x01C21000
-#define DAVINCI_ATA_BASE	     0x01C66000
-#define DAVINCI_MMCSD0_BASE	     0x01E10000
-#define DM355_MMCSD0_BASE	     0x01E11000
-#define DM355_MMCSD1_BASE	     0x01E00000
-#define DM365_MMCSD0_BASE	     0x01D11000
-#define DM365_MMCSD1_BASE	     0x01D00000
-
-void __iomem  *davinci_sysmod_base;
-
-void davinci_map_sysmod(void)
-{
-	davinci_sysmod_base = ioremap(DAVINCI_SYSTEM_MODULE_BASE,
-					      0x800);
-	/*
-	 * Throw a bug since a lot of board initialization code depends
-	 * on system module availability. ioremap() failing this early
-	 * need careful looking into anyway.
-	 */
-	BUG_ON(!davinci_sysmod_base);
-}
-
-static struct resource i2c_resources[] = {
-	{
-		.start		= DAVINCI_I2C_BASE,
-		.end		= DAVINCI_I2C_BASE + 0x40,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= DAVINCI_INTC_IRQ(IRQ_I2C),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device davinci_i2c_device = {
-	.name           = "i2c_davinci",
-	.id             = 1,
-	.num_resources	= ARRAY_SIZE(i2c_resources),
-	.resource	= i2c_resources,
-};
-
-void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
-{
-	if (cpu_is_davinci_dm644x())
-		davinci_cfg_reg(DM644X_I2C);
-
-	davinci_i2c_device.dev.platform_data = pdata;
-	(void) platform_device_register(&davinci_i2c_device);
-}
-
-static struct resource ide_resources[] = {
-	{
-		.start		= DAVINCI_ATA_BASE,
-		.end		= DAVINCI_ATA_BASE + 0x7ff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= DAVINCI_INTC_IRQ(IRQ_IDE),
-		.end		= DAVINCI_INTC_IRQ(IRQ_IDE),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static u64 ide_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ide_device = {
-	.name           = "palm_bk3710",
-	.id             = -1,
-	.resource       = ide_resources,
-	.num_resources  = ARRAY_SIZE(ide_resources),
-	.dev = {
-		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-};
-
-void __init davinci_init_ide(void)
-{
-	if (cpu_is_davinci_dm644x()) {
-		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
-		davinci_cfg_reg(DM644X_ATAEN);
-		davinci_cfg_reg(DM644X_HDIREN);
-	} else if (cpu_is_davinci_dm646x()) {
-		/* IRQ_DM646X_IDE is the same as IRQ_IDE */
-		davinci_cfg_reg(DM646X_ATAEN);
-	} else {
-		WARN_ON(1);
-		return;
-	}
-
-	platform_device_register(&ide_device);
-}
-
-#if IS_ENABLED(CONFIG_MMC_DAVINCI)
-
-static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource mmcsd0_resources[] = {
-	{
-		/* different on dm355 */
-		.start = DAVINCI_MMCSD0_BASE,
-		.end   = DAVINCI_MMCSD0_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	/* IRQs:  MMC/SD, then SDIO */
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_MMCINT),
-		.flags = IORESOURCE_IRQ,
-	}, {
-		/* different on dm355 */
-		.start = DAVINCI_INTC_IRQ(IRQ_SDIOINT),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device davinci_mmcsd0_device = {
-	.name = "dm6441-mmc",
-	.id = 0,
-	.dev = {
-		.dma_mask = &mmcsd0_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources = ARRAY_SIZE(mmcsd0_resources),
-	.resource = mmcsd0_resources,
-};
-
-static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource mmcsd1_resources[] = {
-	{
-		.start = DM355_MMCSD1_BASE,
-		.end   = DM355_MMCSD1_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	/* IRQs:  MMC/SD, then SDIO */
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM355_MMCINT1),
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = DAVINCI_INTC_IRQ(IRQ_DM355_SDIOINT1),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device davinci_mmcsd1_device = {
-	.name = "dm6441-mmc",
-	.id = 1,
-	.dev = {
-		.dma_mask = &mmcsd1_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources = ARRAY_SIZE(mmcsd1_resources),
-	.resource = mmcsd1_resources,
-};
-
-
-void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
-{
-	struct platform_device	*pdev = NULL;
-
-	if (WARN_ON(cpu_is_davinci_dm646x()))
-		return;
-
-	/* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too;
-	 * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused.
-	 *
-	 * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are
-	 * not handled right here ...
-	 */
-	switch (module) {
-	case 1:
-		if (cpu_is_davinci_dm355()) {
-			/* REVISIT we may not need all these pins if e.g. this
-			 * is a hard-wired SDIO device...
-			 */
-			davinci_cfg_reg(DM355_SD1_CMD);
-			davinci_cfg_reg(DM355_SD1_CLK);
-			davinci_cfg_reg(DM355_SD1_DATA0);
-			davinci_cfg_reg(DM355_SD1_DATA1);
-			davinci_cfg_reg(DM355_SD1_DATA2);
-			davinci_cfg_reg(DM355_SD1_DATA3);
-		} else if (cpu_is_davinci_dm365()) {
-			/* Configure pull down control */
-			unsigned v;
-
-			v = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
-			__raw_writel(v & ~0xfc0,
-					DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
-
-			mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
-			mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
-							SZ_4K - 1;
-			mmcsd1_resources[2].start = DAVINCI_INTC_IRQ(
-							IRQ_DM365_SDIOINT1);
-			davinci_mmcsd1_device.name = "da830-mmc";
-		} else
-			break;
-
-		pdev = &davinci_mmcsd1_device;
-		break;
-	case 0:
-		if (cpu_is_davinci_dm355()) {
-			mmcsd0_resources[0].start = DM355_MMCSD0_BASE;
-			mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1;
-			mmcsd0_resources[2].start = DAVINCI_INTC_IRQ(
-							IRQ_DM355_SDIOINT0);
-
-			/* expose all 6 MMC0 signals:  CLK, CMD, DATA[0..3] */
-			davinci_cfg_reg(DM355_MMCSD0);
-
-			/* enable RX EDMA */
-			davinci_cfg_reg(DM355_EVT26_MMC0_RX);
-		} else if (cpu_is_davinci_dm365()) {
-			mmcsd0_resources[0].start = DM365_MMCSD0_BASE;
-			mmcsd0_resources[0].end = DM365_MMCSD0_BASE +
-							SZ_4K - 1;
-			mmcsd0_resources[2].start = DAVINCI_INTC_IRQ(
-							IRQ_DM365_SDIOINT0);
-			davinci_mmcsd0_device.name = "da830-mmc";
-		} else if (cpu_is_davinci_dm644x()) {
-			/* REVISIT: should this be in board-init code? */
-			/* Power-on 3.3V IO cells */
-			__raw_writel(0,
-				DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
-			/*Set up the pull regiter for MMC */
-			davinci_cfg_reg(DM644X_MSTK);
-		}
-
-		pdev = &davinci_mmcsd0_device;
-		break;
-	}
-
-	if (WARN_ON(!pdev))
-		return;
-
-	pdev->dev.platform_data = config;
-	platform_device_register(pdev);
-}
-
-#else
-
-void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
-{
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-static struct resource wdt_resources[] = {
-	{
-		.start	= DAVINCI_WDOG_BASE,
-		.end	= DAVINCI_WDOG_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_wdt_device = {
-	.name		= "davinci-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-	.resource	= wdt_resources,
-};
-
-int davinci_init_wdt(void)
-{
-	return platform_device_register(&davinci_wdt_device);
-}
-
-static struct platform_device davinci_gpio_device = {
-	.name	= "davinci_gpio",
-	.id	= -1,
-};
-
-int davinci_gpio_register(struct resource *res, int size, void *pdata)
-{
-	davinci_gpio_device.resource = res;
-	davinci_gpio_device.num_resources = size;
-	davinci_gpio_device.dev.platform_data = pdata;
-	return platform_device_register(&davinci_gpio_device);
-}
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
deleted file mode 100644
index a12ba859beca..000000000000
--- a/arch/arm/mach-davinci/dm355.c
+++ /dev/null
@@ -1,832 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DaVinci DM355 chip specific setup
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC.
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip/irq-davinci-aintc.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/spi/spi.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "cputype.h"
-#include "serial.h"
-#include "asp.h"
-#include "davinci.h"
-#include "irqs.h"
-#include "mux.h"
-
-#define DM355_UART2_BASE	(IO_PHYS + 0x206000)
-#define DM355_OSD_BASE		(IO_PHYS + 0x70200)
-#define DM355_VENC_BASE		(IO_PHYS + 0x70400)
-
-/*
- * Device specific clocks
- */
-#define DM355_REF_FREQ		24000000	/* 24 or 36 MHz */
-
-static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource dm355_spi0_resources[] = {
-	{
-		.start = 0x01c66000,
-		.end   = 0x01c667ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM355_SPINT0_0),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_spi_platform_data dm355_spi0_pdata = {
-	.version 	= SPI_VERSION_1,
-	.num_chipselect = 2,
-	.cshold_bug	= true,
-	.dma_event_q	= EVENTQ_1,
-	.prescaler_limit = 1,
-};
-static struct platform_device dm355_spi0_device = {
-	.name = "spi_davinci",
-	.id = 0,
-	.dev = {
-		.dma_mask = &dm355_spi0_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &dm355_spi0_pdata,
-	},
-	.num_resources = ARRAY_SIZE(dm355_spi0_resources),
-	.resource = dm355_spi0_resources,
-};
-
-void __init dm355_init_spi0(unsigned chipselect_mask,
-		const struct spi_board_info *info, unsigned len)
-{
-	/* for now, assume we need MISO */
-	davinci_cfg_reg(DM355_SPI0_SDI);
-
-	/* not all slaves will be wired up */
-	if (chipselect_mask & BIT(0))
-		davinci_cfg_reg(DM355_SPI0_SDENA0);
-	if (chipselect_mask & BIT(1))
-		davinci_cfg_reg(DM355_SPI0_SDENA1);
-
-	spi_register_board_info(info, len);
-
-	platform_device_register(&dm355_spi0_device);
-}
-
-/*----------------------------------------------------------------------*/
-
-#define INTMUX		0x18
-#define EVTMUX		0x1c
-
-/*
- * Device specific mux setup
- *
- *	soc	description	mux  mode   mode  mux	 dbg
- *				reg  offset mask  mode
- */
-static const struct mux_config dm355_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM355,	MMCSD0,		4,   2,     1,	  0,	 false)
-
-MUX_CFG(DM355,	SD1_CLK,	3,   6,     1,	  1,	 false)
-MUX_CFG(DM355,	SD1_CMD,	3,   7,     1,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA3,	3,   8,     3,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA2,	3,   10,    3,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA1,	3,   12,    3,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA0,	3,   14,    3,	  1,	 false)
-
-MUX_CFG(DM355,	I2C_SDA,	3,   19,    1,	  1,	 false)
-MUX_CFG(DM355,	I2C_SCL,	3,   20,    1,	  1,	 false)
-
-MUX_CFG(DM355,	MCBSP0_BDX,	3,   0,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_X,	3,   1,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_BFSX,	3,   2,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_BDR,	3,   3,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_R,	3,   4,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_BFSR,	3,   5,     1,	  1,	 false)
-
-MUX_CFG(DM355,	SPI0_SDI,	4,   1,     1,    0,	 false)
-MUX_CFG(DM355,	SPI0_SDENA0,	4,   0,     1,    0,	 false)
-MUX_CFG(DM355,	SPI0_SDENA1,	3,   28,    1,    1,	 false)
-
-INT_CFG(DM355,  INT_EDMA_CC,	      2,    1,    1,     false)
-INT_CFG(DM355,  INT_EDMA_TC0_ERR,     3,    1,    1,     false)
-INT_CFG(DM355,  INT_EDMA_TC1_ERR,     4,    1,    1,     false)
-
-EVT_CFG(DM355,  EVT8_ASP1_TX,	      0,    1,    0,     false)
-EVT_CFG(DM355,  EVT9_ASP1_RX,	      1,    1,    0,     false)
-EVT_CFG(DM355,  EVT26_MMC0_RX,	      2,    1,    0,     false)
-
-MUX_CFG(DM355,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
-MUX_CFG(DM355,	VOUT_FIELD_G70,	1,   18,    3,	  0,	 false)
-MUX_CFG(DM355,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
-MUX_CFG(DM355,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
-MUX_CFG(DM355,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
-
-MUX_CFG(DM355,	VIN_PCLK,	0,   14,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CAM_WEN,	0,   13,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CAM_VD,	0,   12,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CAM_HD,	0,   11,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_YIN_EN,	0,   10,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CINL_EN,	0,   0,   0xff, 0x55,	 false)
-MUX_CFG(DM355,	VIN_CINH_EN,	0,   8,     3,    3,	 false)
-#endif
-};
-
-static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_DM355_CCDC_VDINT0]		= 2,
-	[IRQ_DM355_CCDC_VDINT1]		= 6,
-	[IRQ_DM355_CCDC_VDINT2]		= 6,
-	[IRQ_DM355_IPIPE_HST]		= 6,
-	[IRQ_DM355_H3AINT]		= 6,
-	[IRQ_DM355_IPIPE_SDR]		= 6,
-	[IRQ_DM355_IPIPEIFINT]		= 6,
-	[IRQ_DM355_OSDINT]		= 7,
-	[IRQ_DM355_VENCINT]		= 6,
-	[IRQ_ASQINT]			= 6,
-	[IRQ_IMXINT]			= 6,
-	[IRQ_USBINT]			= 4,
-	[IRQ_DM355_RTOINT]		= 4,
-	[IRQ_DM355_UARTINT2]		= 7,
-	[IRQ_DM355_TINT6]		= 7,
-	[IRQ_CCINT0]			= 5,	/* dma */
-	[IRQ_CCERRINT]			= 5,	/* dma */
-	[IRQ_TCERRINT0]			= 5,	/* dma */
-	[IRQ_TCERRINT]			= 5,	/* dma */
-	[IRQ_DM355_SPINT2_1]		= 7,
-	[IRQ_DM355_TINT7]		= 4,
-	[IRQ_DM355_SDIOINT0]		= 7,
-	[IRQ_MBXINT]			= 7,
-	[IRQ_MBRINT]			= 7,
-	[IRQ_MMCINT]			= 7,
-	[IRQ_DM355_MMCINT1]		= 7,
-	[IRQ_DM355_PWMINT3]		= 7,
-	[IRQ_DDRINT]			= 7,
-	[IRQ_AEMIFINT]			= 7,
-	[IRQ_DM355_SDIOINT1]		= 4,
-	[IRQ_TINT0_TINT12]		= 2,	/* clockevent */
-	[IRQ_TINT0_TINT34]		= 2,	/* clocksource */
-	[IRQ_TINT1_TINT12]		= 7,	/* DSP timer */
-	[IRQ_TINT1_TINT34]		= 7,	/* system tick */
-	[IRQ_PWMINT0]			= 7,
-	[IRQ_PWMINT1]			= 7,
-	[IRQ_PWMINT2]			= 7,
-	[IRQ_I2C]			= 3,
-	[IRQ_UARTINT0]			= 3,
-	[IRQ_UARTINT1]			= 3,
-	[IRQ_DM355_SPINT0_0]		= 3,
-	[IRQ_DM355_SPINT0_1]		= 3,
-	[IRQ_DM355_GPIO0]		= 3,
-	[IRQ_DM355_GPIO1]		= 7,
-	[IRQ_DM355_GPIO2]		= 4,
-	[IRQ_DM355_GPIO3]		= 4,
-	[IRQ_DM355_GPIO4]		= 7,
-	[IRQ_DM355_GPIO5]		= 7,
-	[IRQ_DM355_GPIO6]		= 7,
-	[IRQ_DM355_GPIO7]		= 7,
-	[IRQ_DM355_GPIO8]		= 7,
-	[IRQ_DM355_GPIO9]		= 7,
-	[IRQ_DM355_GPIOBNK0]		= 7,
-	[IRQ_DM355_GPIOBNK1]		= 7,
-	[IRQ_DM355_GPIOBNK2]		= 7,
-	[IRQ_DM355_GPIOBNK3]		= 7,
-	[IRQ_DM355_GPIOBNK4]		= 7,
-	[IRQ_DM355_GPIOBNK5]		= 7,
-	[IRQ_DM355_GPIOBNK6]		= 7,
-	[IRQ_COMMTX]			= 7,
-	[IRQ_COMMRX]			= 7,
-	[IRQ_EMUINT]			= 7,
-};
-
-/*----------------------------------------------------------------------*/
-
-static s8 queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{1, 7},
-	{-1, -1},
-};
-
-static const struct dma_slave_map dm355_edma_map[] = {
-	{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) },
-	{ "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 8) },
-	{ "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 9) },
-	{ "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },
-	{ "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) },
-	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) },
-	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) },
-	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) },
-	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
-	{ "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
-	{ "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
-	{ "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
-	{ "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
-};
-
-static struct edma_soc_info dm355_edma_pdata = {
-	.queue_priority_mapping	= queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
-	.slave_map		= dm355_edma_map,
-	.slavecnt		= ARRAY_SIZE(dm355_edma_map),
-};
-
-static struct resource edma_resources[] = {
-	{
-		.name	= "edma3_cc",
-		.start	= 0x01c00000,
-		.end	= 0x01c00000 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc0",
-		.start	= 0x01c10000,
-		.end	= 0x01c10000 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc1",
-		.start	= 0x01c10400,
-		.end	= 0x01c10400 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_ccint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma3_ccerrint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCERRINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* not using (or muxing) TC*_ERR */
-};
-
-static const struct platform_device_info dm355_edma_device __initconst = {
-	.name		= "edma",
-	.id		= 0,
-	.dma_mask	= DMA_BIT_MASK(32),
-	.res		= edma_resources,
-	.num_res	= ARRAY_SIZE(edma_resources),
-	.data		= &dm355_edma_pdata,
-	.size_data	= sizeof(dm355_edma_pdata),
-};
-
-static struct resource dm355_asp1_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_ASP1_BASE,
-		.end	= DAVINCI_ASP1_BASE + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP1_TX,
-		.end	= DAVINCI_DMA_ASP1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP1_RX,
-		.end	= DAVINCI_DMA_ASP1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm355_asp1_device = {
-	.name		= "davinci-mcbsp",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(dm355_asp1_resources),
-	.resource	= dm355_asp1_resources,
-};
-
-static void dm355_ccdc_setup_pinmux(void)
-{
-	davinci_cfg_reg(DM355_VIN_PCLK);
-	davinci_cfg_reg(DM355_VIN_CAM_WEN);
-	davinci_cfg_reg(DM355_VIN_CAM_VD);
-	davinci_cfg_reg(DM355_VIN_CAM_HD);
-	davinci_cfg_reg(DM355_VIN_YIN_EN);
-	davinci_cfg_reg(DM355_VIN_CINL_EN);
-	davinci_cfg_reg(DM355_VIN_CINH_EN);
-}
-
-static struct resource dm355_vpss_resources[] = {
-	{
-		/* VPSS BL Base address */
-		.name		= "vpss",
-		.start          = 0x01c70800,
-		.end            = 0x01c70800 + 0xff,
-		.flags          = IORESOURCE_MEM,
-	},
-	{
-		/* VPSS CLK Base address */
-		.name		= "vpss",
-		.start          = 0x01c70000,
-		.end            = 0x01c70000 + 0xf,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm355_vpss_device = {
-	.name			= "vpss",
-	.id			= -1,
-	.dev.platform_data	= "dm355_vpss",
-	.num_resources		= ARRAY_SIZE(dm355_vpss_resources),
-	.resource		= dm355_vpss_resources,
-};
-
-static struct resource vpfe_resources[] = {
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.flags          = IORESOURCE_IRQ,
-	},
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.flags          = IORESOURCE_IRQ,
-	},
-};
-
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
-static struct resource dm355_ccdc_resource[] = {
-	/* CCDC Base address */
-	{
-		.flags          = IORESOURCE_MEM,
-		.start          = 0x01c70600,
-		.end            = 0x01c70600 + 0x1ff,
-	},
-};
-static struct platform_device dm355_ccdc_dev = {
-	.name           = "dm355_ccdc",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(dm355_ccdc_resource),
-	.resource       = dm355_ccdc_resource,
-	.dev = {
-		.dma_mask               = &vpfe_capture_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-		.platform_data		= dm355_ccdc_setup_pinmux,
-	},
-};
-
-static struct platform_device vpfe_capture_dev = {
-	.name		= CAPTURE_DRV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(vpfe_resources),
-	.resource	= vpfe_resources,
-	.dev = {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource dm355_osd_resources[] = {
-	{
-		.start	= DM355_OSD_BASE,
-		.end	= DM355_OSD_BASE + 0x17f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm355_osd_dev = {
-	.name		= DM355_VPBE_OSD_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm355_osd_resources),
-	.resource	= dm355_osd_resources,
-	.dev		= {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource dm355_venc_resources[] = {
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.end	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* venc registers io space */
-	{
-		.start	= DM355_VENC_BASE,
-		.end	= DM355_VENC_BASE + 0x17f,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* VDAC config register io space */
-	{
-		.start	= DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG,
-		.end	= DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource dm355_v4l2_disp_resources[] = {
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.end	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* venc registers io space */
-	{
-		.start	= DM355_VENC_BASE,
-		.end	= DM355_VENC_BASE + 0x17f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static int dm355_vpbe_setup_pinmux(u32 if_type, int field)
-{
-	switch (if_type) {
-	case MEDIA_BUS_FMT_SGRBG8_1X8:
-		davinci_cfg_reg(DM355_VOUT_FIELD_G70);
-		break;
-	case MEDIA_BUS_FMT_YUYV10_1X20:
-		if (field)
-			davinci_cfg_reg(DM355_VOUT_FIELD);
-		else
-			davinci_cfg_reg(DM355_VOUT_FIELD_G70);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	davinci_cfg_reg(DM355_VOUT_COUTL_EN);
-	davinci_cfg_reg(DM355_VOUT_COUTH_EN);
-
-	return 0;
-}
-
-static int dm355_venc_setup_clock(enum vpbe_enc_timings_type type,
-				   unsigned int pclock)
-{
-	void __iomem *vpss_clk_ctrl_reg;
-
-	vpss_clk_ctrl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL);
-
-	switch (type) {
-	case VPBE_ENC_STD:
-		writel(VPSS_DACCLKEN_ENABLE | VPSS_VENCCLKEN_ENABLE,
-		       vpss_clk_ctrl_reg);
-		break;
-	case VPBE_ENC_DV_TIMINGS:
-		if (pclock > 27000000)
-			/*
-			 * For HD, use external clock source since we cannot
-			 * support HD mode with internal clocks.
-			 */
-			writel(VPSS_MUXSEL_EXTCLK_ENABLE, vpss_clk_ctrl_reg);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct platform_device dm355_vpbe_display = {
-	.name		= "vpbe-v4l2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm355_v4l2_disp_resources),
-	.resource	= dm355_v4l2_disp_resources,
-	.dev		= {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct venc_platform_data dm355_venc_pdata = {
-	.setup_pinmux	= dm355_vpbe_setup_pinmux,
-	.setup_clock	= dm355_venc_setup_clock,
-};
-
-static struct platform_device dm355_venc_dev = {
-	.name		= DM355_VPBE_VENC_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm355_venc_resources),
-	.resource	= dm355_venc_resources,
-	.dev		= {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= (void *)&dm355_venc_pdata,
-	},
-};
-
-static struct platform_device dm355_vpbe_dev = {
-	.name		= "vpbe_controller",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource dm355_gpio_resources[] = {
-	{	/* registers */
-		.start	= DAVINCI_GPIO_BASE,
-		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{	/* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK2),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK2),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK3),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK3),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK4),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK4),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK5),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK5),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK6),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK6),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
-	.no_auto_base	= true,
-	.base		= 0,
-	.ngpio		= 104,
-};
-
-int __init dm355_gpio_register(void)
-{
-	return davinci_gpio_register(dm355_gpio_resources,
-				     ARRAY_SIZE(dm355_gpio_resources),
-				     &dm355_gpio_platform_data);
-}
-/*----------------------------------------------------------------------*/
-
-static struct map_desc dm355_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm355_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb73b,
-		.manufacturer	= 0x00f,
-		.cpu_id		= DAVINCI_CPU_ID_DM355,
-		.name		= "dm355",
-	},
-};
-
-/*
- * Bottom half of timer0 is used for clockevent, top half is used for
- * clocksource.
- */
-static const struct davinci_timer_cfg dm355_timer_cfg = {
-	.reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_4K),
-	.irq = {
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
-	},
-};
-
-static struct plat_serial8250_port dm355_serial0_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT0),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm355_serial1_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART1_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT1),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm355_serial2_platform_data[] = {
-	{
-		.mapbase	= DM355_UART2_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_DM355_UARTINT2),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-
-struct platform_device dm355_serial_device[] = {
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM,
-		.dev			= {
-			.platform_data	= dm355_serial0_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM1,
-		.dev			= {
-			.platform_data	= dm355_serial1_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM2,
-		.dev			= {
-			.platform_data	= dm355_serial2_platform_data,
-		}
-	},
-	{
-	}
-};
-
-static const struct davinci_soc_info davinci_soc_info_dm355 = {
-	.io_desc		= dm355_io_desc,
-	.io_desc_num		= ARRAY_SIZE(dm355_io_desc),
-	.jtag_id_reg		= 0x01c40028,
-	.ids			= dm355_ids,
-	.ids_num		= ARRAY_SIZE(dm355_ids),
-	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
-	.pinmux_pins		= dm355_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(dm355_pins),
-	.sram_dma		= 0x00010000,
-	.sram_len		= SZ_32K,
-};
-
-void __init dm355_init_asp1(u32 evt_enable)
-{
-	/* we don't use ASP1 IRQs, or we'd need to mux them ... */
-	if (evt_enable & ASP1_TX_EVT_EN)
-		davinci_cfg_reg(DM355_EVT8_ASP1_TX);
-
-	if (evt_enable & ASP1_RX_EVT_EN)
-		davinci_cfg_reg(DM355_EVT9_ASP1_RX);
-
-	platform_device_register(&dm355_asp1_device);
-}
-
-void __init dm355_init(void)
-{
-	davinci_common_init(&davinci_soc_info_dm355);
-	davinci_map_sysmod();
-}
-
-void __init dm355_init_time(void)
-{
-	void __iomem *pll1, *psc;
-	struct clk *clk;
-	int rv;
-
-	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM355_REF_FREQ);
-
-	pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
-	dm355_pll1_init(NULL, pll1, NULL);
-
-	psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
-	dm355_psc_init(NULL, psc);
-
-	clk = clk_get(NULL, "timer0");
-	if (WARN_ON(IS_ERR(clk))) {
-		pr_err("Unable to get the timer clock\n");
-		return;
-	}
-
-	rv = davinci_timer_register(clk, &dm355_timer_cfg);
-	WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-static struct resource dm355_pll2_resources[] = {
-	{
-		.start	= DAVINCI_PLL2_BASE,
-		.end	= DAVINCI_PLL2_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm355_pll2_device = {
-	.name		= "dm355-pll2",
-	.id		= -1,
-	.resource	= dm355_pll2_resources,
-	.num_resources	= ARRAY_SIZE(dm355_pll2_resources),
-};
-
-void __init dm355_register_clocks(void)
-{
-	/* PLL1 and PSC are registered in dm355_init_time() */
-	platform_device_register(&dm355_pll2_device);
-}
-
-int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
-				struct vpbe_config *vpbe_cfg)
-{
-	if (vpfe_cfg || vpbe_cfg)
-		platform_device_register(&dm355_vpss_device);
-
-	if (vpfe_cfg) {
-		vpfe_capture_dev.dev.platform_data = vpfe_cfg;
-		platform_device_register(&dm355_ccdc_dev);
-		platform_device_register(&vpfe_capture_dev);
-	}
-
-	if (vpbe_cfg) {
-		dm355_vpbe_dev.dev.platform_data = vpbe_cfg;
-		platform_device_register(&dm355_osd_dev);
-		platform_device_register(&dm355_venc_dev);
-		platform_device_register(&dm355_vpbe_dev);
-		platform_device_register(&dm355_vpbe_display);
-	}
-
-	return 0;
-}
-
-static const struct davinci_aintc_config dm355_aintc_config = {
-	.reg = {
-		.start		= DAVINCI_ARM_INTC_BASE,
-		.end		= DAVINCI_ARM_INTC_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	.num_irqs		= 64,
-	.prios			= dm355_default_priorities,
-};
-
-void __init dm355_init_irq(void)
-{
-	davinci_aintc_init(&dm355_aintc_config);
-}
-
-static int __init dm355_init_devices(void)
-{
-	struct platform_device *edma_pdev;
-	int ret = 0;
-
-	if (!cpu_is_davinci_dm355())
-		return 0;
-
-	davinci_cfg_reg(DM355_INT_EDMA_CC);
-	edma_pdev = platform_device_register_full(&dm355_edma_device);
-	if (IS_ERR(edma_pdev)) {
-		pr_warn("%s: Failed to register eDMA\n", __func__);
-		return PTR_ERR(edma_pdev);
-	}
-
-	ret = davinci_init_wdt();
-	if (ret)
-		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
-
-	return ret;
-}
-postcore_initcall(dm355_init_devices);
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
deleted file mode 100644
index 7538bb87f373..000000000000
--- a/arch/arm/mach-davinci/dm365.c
+++ /dev/null
@@ -1,1094 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DaVinci DM365 chip specific setup
- *
- * Copyright (C) 2009 Texas Instruments
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip/irq-davinci-aintc.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/keyscan-davinci.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/spi/spi.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "cputype.h"
-#include "serial.h"
-#include "asp.h"
-#include "davinci.h"
-#include "irqs.h"
-#include "mux.h"
-
-#define DM365_REF_FREQ		24000000	/* 24 MHz on the DM365 EVM */
-#define DM365_RTC_BASE			0x01c69000
-#define DM365_KEYSCAN_BASE		0x01c69400
-#define DM365_OSD_BASE			0x01c71c00
-#define DM365_VENC_BASE			0x01c71e00
-#define DAVINCI_DM365_VC_BASE		0x01d0c000
-#define DAVINCI_DMA_VC_TX		2
-#define DAVINCI_DMA_VC_RX		3
-#define DM365_EMAC_BASE			0x01d07000
-#define DM365_EMAC_MDIO_BASE		(DM365_EMAC_BASE + 0x4000)
-#define DM365_EMAC_CNTRL_OFFSET		0x0000
-#define DM365_EMAC_CNTRL_MOD_OFFSET	0x3000
-#define DM365_EMAC_CNTRL_RAM_OFFSET	0x1000
-#define DM365_EMAC_CNTRL_RAM_SIZE	0x2000
-
-#define INTMUX		0x18
-#define EVTMUX		0x1c
-
-
-static const struct mux_config dm365_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM365,	MMCSD0,		0,   24,     1,	  0,	 false)
-
-MUX_CFG(DM365,	SD1_CLK,	0,   16,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_CMD,	4,   30,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA3,	4,   28,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA2,	4,   26,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA1,	4,   24,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA0,	4,   22,    3,	  1,	 false)
-
-MUX_CFG(DM365,	I2C_SDA,	3,   23,    3,	  2,	 false)
-MUX_CFG(DM365,	I2C_SCL,	3,   21,    3,	  2,	 false)
-
-MUX_CFG(DM365,	AEMIF_AR_A14,	2,   0,     3,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_AR_BA0,	2,   0,     3,	  2,	 false)
-MUX_CFG(DM365,	AEMIF_A3,	2,   2,     3,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_A7,	2,   4,     3,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_D15_8,	2,   6,     1,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_CE0,	2,   7,     1,	  0,	 false)
-MUX_CFG(DM365,	AEMIF_CE1,	2,   8,     1,    0,     false)
-MUX_CFG(DM365,	AEMIF_WE_OE,	2,   9,     1,    0,     false)
-
-MUX_CFG(DM365,	MCBSP0_BDX,	0,   23,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_X,	0,   22,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_BFSX,	0,   21,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_BDR,	0,   20,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_R,	0,   19,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_BFSR,	0,   18,    1,	  1,	 false)
-
-MUX_CFG(DM365,	SPI0_SCLK,	3,   28,    1,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDI,	3,   26,    3,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDO,	3,   25,    1,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDENA0,	3,   29,    3,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDENA1,	3,   26,    3,    2,	 false)
-
-MUX_CFG(DM365,	UART0_RXD,	3,   20,    1,    1,	 false)
-MUX_CFG(DM365,	UART0_TXD,	3,   19,    1,    1,	 false)
-MUX_CFG(DM365,	UART1_RXD,	3,   17,    3,    2,	 false)
-MUX_CFG(DM365,	UART1_TXD,	3,   15,    3,    2,	 false)
-MUX_CFG(DM365,	UART1_RTS,	3,   23,    3,    1,	 false)
-MUX_CFG(DM365,	UART1_CTS,	3,   21,    3,    1,	 false)
-
-MUX_CFG(DM365,  EMAC_TX_EN,	3,   17,    3,    1,     false)
-MUX_CFG(DM365,  EMAC_TX_CLK,	3,   15,    3,    1,     false)
-MUX_CFG(DM365,  EMAC_COL,	3,   14,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD3,	3,   13,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD2,	3,   12,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD1,	3,   11,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD0,	3,   10,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD3,	3,   9,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD2,	3,   8,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD1,	3,   7,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD0,	3,   6,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RX_CLK,	3,   5,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RX_DV,	3,   4,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RX_ER,	3,   3,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_CRS,	3,   2,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_MDIO,	3,   1,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_MDCLK,	3,   0,     1,    1,     false)
-
-MUX_CFG(DM365,	KEYSCAN,	2,   0,     0x3f, 0x3f,  false)
-
-MUX_CFG(DM365,	PWM0,		1,   0,     3,    2,     false)
-MUX_CFG(DM365,	PWM0_G23,	3,   26,    3,    3,     false)
-MUX_CFG(DM365,	PWM1,		1,   2,     3,    2,     false)
-MUX_CFG(DM365,	PWM1_G25,	3,   29,    3,    2,     false)
-MUX_CFG(DM365,	PWM2_G87,	1,   10,    3,    2,     false)
-MUX_CFG(DM365,	PWM2_G88,	1,   8,     3,    2,     false)
-MUX_CFG(DM365,	PWM2_G89,	1,   6,     3,    2,     false)
-MUX_CFG(DM365,	PWM2_G90,	1,   4,     3,    2,     false)
-MUX_CFG(DM365,	PWM3_G80,	1,   20,    3,    3,     false)
-MUX_CFG(DM365,	PWM3_G81,	1,   18,    3,    3,     false)
-MUX_CFG(DM365,	PWM3_G85,	1,   14,    3,    2,     false)
-MUX_CFG(DM365,	PWM3_G86,	1,   12,    3,    2,     false)
-
-MUX_CFG(DM365,	SPI1_SCLK,	4,   2,     3,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDI,	3,   31,    1,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDO,	4,   0,     3,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDENA0,	4,   4,     3,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDENA1,	4,   0,     3,    2,	 false)
-
-MUX_CFG(DM365,	SPI2_SCLK,	4,   10,    3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDI,	4,   6,     3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDO,	4,   8,     3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDENA0,	4,   12,    3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDENA1,	4,   8,     3,    2,	 false)
-
-MUX_CFG(DM365,	SPI3_SCLK,	0,   0,	    3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDI,	0,   2,     3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDO,	0,   6,     3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDENA0,	0,   4,     3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDENA1,	0,   6,     3,    3,	 false)
-
-MUX_CFG(DM365,	SPI4_SCLK,	4,   18,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDI,	4,   14,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDO,	4,   16,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDENA0,	4,   20,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDENA1,	4,   16,    3,    2,	 false)
-
-MUX_CFG(DM365,	CLKOUT0,	4,   20,    3,    3,     false)
-MUX_CFG(DM365,	CLKOUT1,	4,   16,    3,    3,     false)
-MUX_CFG(DM365,	CLKOUT2,	4,   8,     3,    3,     false)
-
-MUX_CFG(DM365,	GPIO20,		3,   21,    3,    0,	 false)
-MUX_CFG(DM365,	GPIO30,		4,   6,     3,	  0,	 false)
-MUX_CFG(DM365,	GPIO31,		4,   8,     3,	  0,	 false)
-MUX_CFG(DM365,	GPIO32,		4,   10,    3,	  0,	 false)
-MUX_CFG(DM365,	GPIO33,		4,   12,    3,	  0,	 false)
-MUX_CFG(DM365,	GPIO40,		4,   26,    3,	  0,	 false)
-MUX_CFG(DM365,	GPIO64_57,	2,   6,     1,	  0,	 false)
-
-MUX_CFG(DM365,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
-MUX_CFG(DM365,	VOUT_FIELD_G81,	1,   18,    3,	  0,	 false)
-MUX_CFG(DM365,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
-MUX_CFG(DM365,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
-MUX_CFG(DM365,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
-MUX_CFG(DM365,	VIN_CAM_WEN,	0,   14,    3,	  0,	 false)
-MUX_CFG(DM365,	VIN_CAM_VD,	0,   13,    1,	  0,	 false)
-MUX_CFG(DM365,	VIN_CAM_HD,	0,   12,    1,	  0,	 false)
-MUX_CFG(DM365,	VIN_YIN4_7_EN,	0,   0,     0xff, 0,	 false)
-MUX_CFG(DM365,	VIN_YIN0_3_EN,	0,   8,     0xf,  0,	 false)
-
-INT_CFG(DM365,  INT_EDMA_CC,         2,     1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC0_ERR,    3,     1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC1_ERR,    4,     1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC2_ERR,    22,    1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC3_ERR,    23,    1,    1,     false)
-INT_CFG(DM365,  INT_PRTCSS,          10,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_RXTHRESH,   14,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_RXPULSE,    15,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_TXPULSE,    16,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_MISCPULSE,  17,    1,    1,     false)
-INT_CFG(DM365,  INT_IMX0_ENABLE,     0,     1,    0,     false)
-INT_CFG(DM365,  INT_IMX0_DISABLE,    0,     1,    1,     false)
-INT_CFG(DM365,  INT_HDVICP_ENABLE,   0,     1,    1,     false)
-INT_CFG(DM365,  INT_HDVICP_DISABLE,  0,     1,    0,     false)
-INT_CFG(DM365,  INT_IMX1_ENABLE,     24,    1,    1,     false)
-INT_CFG(DM365,  INT_IMX1_DISABLE,    24,    1,    0,     false)
-INT_CFG(DM365,  INT_NSF_ENABLE,      25,    1,    1,     false)
-INT_CFG(DM365,  INT_NSF_DISABLE,     25,    1,    0,     false)
-
-EVT_CFG(DM365,	EVT2_ASP_TX,         0,     1,    0,     false)
-EVT_CFG(DM365,	EVT3_ASP_RX,         1,     1,    0,     false)
-EVT_CFG(DM365,	EVT2_VC_TX,          0,     1,    1,     false)
-EVT_CFG(DM365,	EVT3_VC_RX,          1,     1,    1,     false)
-#endif
-};
-
-static u64 dm365_spi0_dma_mask = DMA_BIT_MASK(32);
-
-static struct davinci_spi_platform_data dm365_spi0_pdata = {
-	.version 	= SPI_VERSION_1,
-	.num_chipselect = 2,
-	.dma_event_q	= EVENTQ_3,
-	.prescaler_limit = 1,
-};
-
-static struct resource dm365_spi0_resources[] = {
-	{
-		.start = 0x01c66000,
-		.end   = 0x01c667ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM365_SPIINT0_0),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_spi0_device = {
-	.name = "spi_davinci",
-	.id = 0,
-	.dev = {
-		.dma_mask = &dm365_spi0_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &dm365_spi0_pdata,
-	},
-	.num_resources = ARRAY_SIZE(dm365_spi0_resources),
-	.resource = dm365_spi0_resources,
-};
-
-void __init dm365_init_spi0(unsigned chipselect_mask,
-		const struct spi_board_info *info, unsigned len)
-{
-	davinci_cfg_reg(DM365_SPI0_SCLK);
-	davinci_cfg_reg(DM365_SPI0_SDI);
-	davinci_cfg_reg(DM365_SPI0_SDO);
-
-	/* not all slaves will be wired up */
-	if (chipselect_mask & BIT(0))
-		davinci_cfg_reg(DM365_SPI0_SDENA0);
-	if (chipselect_mask & BIT(1))
-		davinci_cfg_reg(DM365_SPI0_SDENA1);
-
-	spi_register_board_info(info, len);
-
-	platform_device_register(&dm365_spi0_device);
-}
-
-static struct resource dm365_gpio_resources[] = {
-	{	/* registers */
-		.start	= DAVINCI_GPIO_BASE,
-		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{	/* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO2),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO2),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO3),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO3),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO4),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO4),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO5),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO5),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO6),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO6),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO7),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO7),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
-	.no_auto_base	= true,
-	.base		= 0,
-	.ngpio		= 104,
-	.gpio_unbanked	= 8,
-};
-
-int __init dm365_gpio_register(void)
-{
-	return davinci_gpio_register(dm365_gpio_resources,
-				     ARRAY_SIZE(dm365_gpio_resources),
-				     &dm365_gpio_platform_data);
-}
-
-static struct emac_platform_data dm365_emac_pdata = {
-	.ctrl_reg_offset	= DM365_EMAC_CNTRL_OFFSET,
-	.ctrl_mod_reg_offset	= DM365_EMAC_CNTRL_MOD_OFFSET,
-	.ctrl_ram_offset	= DM365_EMAC_CNTRL_RAM_OFFSET,
-	.ctrl_ram_size		= DM365_EMAC_CNTRL_RAM_SIZE,
-	.version		= EMAC_VERSION_2,
-};
-
-static struct resource dm365_emac_resources[] = {
-	{
-		.start	= DM365_EMAC_BASE,
-		.end	= DM365_EMAC_BASE + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXTHRESH),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXTHRESH),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXPULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXPULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_TXPULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_TXPULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_MISCPULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_MISCPULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_emac_device = {
-	.name		= "davinci_emac",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &dm365_emac_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(dm365_emac_resources),
-	.resource	= dm365_emac_resources,
-};
-
-static struct resource dm365_mdio_resources[] = {
-	{
-		.start	= DM365_EMAC_MDIO_BASE,
-		.end	= DM365_EMAC_MDIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm365_mdio_device = {
-	.name		= "davinci_mdio",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm365_mdio_resources),
-	.resource	= dm365_mdio_resources,
-};
-
-static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_VDINT0]			= 2,
-	[IRQ_VDINT1]			= 6,
-	[IRQ_VDINT2]			= 6,
-	[IRQ_HISTINT]			= 6,
-	[IRQ_H3AINT]			= 6,
-	[IRQ_PRVUINT]			= 6,
-	[IRQ_RSZINT]			= 6,
-	[IRQ_DM365_INSFINT]		= 7,
-	[IRQ_VENCINT]			= 6,
-	[IRQ_ASQINT]			= 6,
-	[IRQ_IMXINT]			= 6,
-	[IRQ_DM365_IMCOPINT]		= 4,
-	[IRQ_USBINT]			= 4,
-	[IRQ_DM365_RTOINT]		= 7,
-	[IRQ_DM365_TINT5]		= 7,
-	[IRQ_DM365_TINT6]		= 5,
-	[IRQ_CCINT0]			= 5,
-	[IRQ_CCERRINT]			= 5,
-	[IRQ_TCERRINT0]			= 5,
-	[IRQ_TCERRINT]			= 7,
-	[IRQ_PSCIN]			= 4,
-	[IRQ_DM365_SPINT2_1]		= 7,
-	[IRQ_DM365_TINT7]		= 7,
-	[IRQ_DM365_SDIOINT0]		= 7,
-	[IRQ_MBXINT]			= 7,
-	[IRQ_MBRINT]			= 7,
-	[IRQ_MMCINT]			= 7,
-	[IRQ_DM365_MMCINT1]		= 7,
-	[IRQ_DM365_PWMINT3]		= 7,
-	[IRQ_AEMIFINT]			= 2,
-	[IRQ_DM365_SDIOINT1]		= 2,
-	[IRQ_TINT0_TINT12]		= 7,
-	[IRQ_TINT0_TINT34]		= 7,
-	[IRQ_TINT1_TINT12]		= 7,
-	[IRQ_TINT1_TINT34]		= 7,
-	[IRQ_PWMINT0]			= 7,
-	[IRQ_PWMINT1]			= 3,
-	[IRQ_PWMINT2]			= 3,
-	[IRQ_I2C]			= 3,
-	[IRQ_UARTINT0]			= 3,
-	[IRQ_UARTINT1]			= 3,
-	[IRQ_DM365_RTCINT]		= 3,
-	[IRQ_DM365_SPIINT0_0]		= 3,
-	[IRQ_DM365_SPIINT3_0]		= 3,
-	[IRQ_DM365_GPIO0]		= 3,
-	[IRQ_DM365_GPIO1]		= 7,
-	[IRQ_DM365_GPIO2]		= 4,
-	[IRQ_DM365_GPIO3]		= 4,
-	[IRQ_DM365_GPIO4]		= 7,
-	[IRQ_DM365_GPIO5]		= 7,
-	[IRQ_DM365_GPIO6]		= 7,
-	[IRQ_DM365_GPIO7]		= 7,
-	[IRQ_DM365_EMAC_RXTHRESH]	= 7,
-	[IRQ_DM365_EMAC_RXPULSE]	= 7,
-	[IRQ_DM365_EMAC_TXPULSE]	= 7,
-	[IRQ_DM365_EMAC_MISCPULSE]	= 7,
-	[IRQ_DM365_GPIO12]		= 7,
-	[IRQ_DM365_GPIO13]		= 7,
-	[IRQ_DM365_GPIO14]		= 7,
-	[IRQ_DM365_GPIO15]		= 7,
-	[IRQ_DM365_KEYINT]		= 7,
-	[IRQ_DM365_TCERRINT2]		= 7,
-	[IRQ_DM365_TCERRINT3]		= 7,
-	[IRQ_DM365_EMUINT]		= 7,
-};
-
-/* Four Transfer Controllers on DM365 */
-static s8 dm365_queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 7},
-	{1, 7},
-	{2, 7},
-	{3, 0},
-	{-1, -1},
-};
-
-static const struct dma_slave_map dm365_edma_map[] = {
-	{ "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) },
-	{ "davinci_voicecodec", "tx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci_voicecodec", "rx", EDMA_FILTER_PARAM(0, 3) },
-	{ "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },
-	{ "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) },
-	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) },
-	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) },
-	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) },
-	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
-	{ "spi_davinci.3", "tx", EDMA_FILTER_PARAM(0, 18) },
-	{ "spi_davinci.3", "rx", EDMA_FILTER_PARAM(0, 19) },
-	{ "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
-	{ "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
-	{ "da830-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
-	{ "da830-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
-};
-
-static struct edma_soc_info dm365_edma_pdata = {
-	.queue_priority_mapping	= dm365_queue_priority_mapping,
-	.default_queue		= EVENTQ_3,
-	.slave_map		= dm365_edma_map,
-	.slavecnt		= ARRAY_SIZE(dm365_edma_map),
-};
-
-static struct resource edma_resources[] = {
-	{
-		.name	= "edma3_cc",
-		.start	= 0x01c00000,
-		.end	= 0x01c00000 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc0",
-		.start	= 0x01c10000,
-		.end	= 0x01c10000 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc1",
-		.start	= 0x01c10400,
-		.end	= 0x01c10400 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc2",
-		.start	= 0x01c10800,
-		.end	= 0x01c10800 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc3",
-		.start	= 0x01c10c00,
-		.end	= 0x01c10c00 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_ccint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma3_ccerrint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCERRINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* not using TC*_ERR */
-};
-
-static const struct platform_device_info dm365_edma_device __initconst = {
-	.name		= "edma",
-	.id		= 0,
-	.dma_mask	= DMA_BIT_MASK(32),
-	.res		= edma_resources,
-	.num_res	= ARRAY_SIZE(edma_resources),
-	.data		= &dm365_edma_pdata,
-	.size_data	= sizeof(dm365_edma_pdata),
-};
-
-static struct resource dm365_asp_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_DM365_ASP0_BASE,
-		.end	= DAVINCI_DM365_ASP0_BASE + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP0_TX,
-		.end	= DAVINCI_DMA_ASP0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP0_RX,
-		.end	= DAVINCI_DMA_ASP0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm365_asp_device = {
-	.name		= "davinci-mcbsp",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm365_asp_resources),
-	.resource	= dm365_asp_resources,
-};
-
-static struct resource dm365_vc_resources[] = {
-	{
-		.start	= DAVINCI_DM365_VC_BASE,
-		.end	= DAVINCI_DM365_VC_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_DMA_VC_TX,
-		.end	= DAVINCI_DMA_VC_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DMA_VC_RX,
-		.end	= DAVINCI_DMA_VC_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm365_vc_device = {
-	.name		= "davinci_voicecodec",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm365_vc_resources),
-	.resource	= dm365_vc_resources,
-};
-
-static struct resource dm365_rtc_resources[] = {
-	{
-		.start = DM365_RTC_BASE,
-		.end = DM365_RTC_BASE + SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM365_RTCINT),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_rtc_device = {
-	.name = "rtc_davinci",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(dm365_rtc_resources),
-	.resource = dm365_rtc_resources,
-};
-
-static struct map_desc dm365_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-static struct resource dm365_ks_resources[] = {
-	{
-		/* registers */
-		.start = DM365_KEYSCAN_BASE,
-		.end = DM365_KEYSCAN_BASE + SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		/* interrupt */
-		.start = DAVINCI_INTC_IRQ(IRQ_DM365_KEYINT),
-		.end = DAVINCI_INTC_IRQ(IRQ_DM365_KEYINT),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_ks_device = {
-	.name		= "davinci_keyscan",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm365_ks_resources),
-	.resource	= dm365_ks_resources,
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm365_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb83e,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM365,
-		.name		= "dm365_rev1.1",
-	},
-	{
-		.variant	= 0x8,
-		.part_no	= 0xb83e,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM365,
-		.name		= "dm365_rev1.2",
-	},
-};
-
-/*
- * Bottom half of timer0 is used for clockevent, top half is used for
- * clocksource.
- */
-static const struct davinci_timer_cfg dm365_timer_cfg = {
-	.reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_128),
-	.irq = {
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
-	},
-};
-
-#define DM365_UART1_BASE	(IO_PHYS + 0x106000)
-
-static struct plat_serial8250_port dm365_serial0_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT0),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm365_serial1_platform_data[] = {
-	{
-		.mapbase	= DM365_UART1_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT1),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-
-struct platform_device dm365_serial_device[] = {
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM,
-		.dev			= {
-			.platform_data	= dm365_serial0_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM1,
-		.dev			= {
-			.platform_data	= dm365_serial1_platform_data,
-		}
-	},
-	{
-	}
-};
-
-static const struct davinci_soc_info davinci_soc_info_dm365 = {
-	.io_desc		= dm365_io_desc,
-	.io_desc_num		= ARRAY_SIZE(dm365_io_desc),
-	.jtag_id_reg		= 0x01c40028,
-	.ids			= dm365_ids,
-	.ids_num		= ARRAY_SIZE(dm365_ids),
-	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
-	.pinmux_pins		= dm365_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(dm365_pins),
-	.emac_pdata		= &dm365_emac_pdata,
-	.sram_dma		= 0x00010000,
-	.sram_len		= SZ_32K,
-};
-
-void __init dm365_init_asp(void)
-{
-	davinci_cfg_reg(DM365_MCBSP0_BDX);
-	davinci_cfg_reg(DM365_MCBSP0_X);
-	davinci_cfg_reg(DM365_MCBSP0_BFSX);
-	davinci_cfg_reg(DM365_MCBSP0_BDR);
-	davinci_cfg_reg(DM365_MCBSP0_R);
-	davinci_cfg_reg(DM365_MCBSP0_BFSR);
-	davinci_cfg_reg(DM365_EVT2_ASP_TX);
-	davinci_cfg_reg(DM365_EVT3_ASP_RX);
-	platform_device_register(&dm365_asp_device);
-}
-
-void __init dm365_init_vc(void)
-{
-	davinci_cfg_reg(DM365_EVT2_VC_TX);
-	davinci_cfg_reg(DM365_EVT3_VC_RX);
-	platform_device_register(&dm365_vc_device);
-}
-
-void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
-{
-	dm365_ks_device.dev.platform_data = pdata;
-	platform_device_register(&dm365_ks_device);
-}
-
-void __init dm365_init_rtc(void)
-{
-	davinci_cfg_reg(DM365_INT_PRTCSS);
-	platform_device_register(&dm365_rtc_device);
-}
-
-void __init dm365_init(void)
-{
-	davinci_common_init(&davinci_soc_info_dm365);
-	davinci_map_sysmod();
-}
-
-void __init dm365_init_time(void)
-{
-	void __iomem *pll1, *pll2, *psc;
-	struct clk *clk;
-	int rv;
-
-	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM365_REF_FREQ);
-
-	pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
-	dm365_pll1_init(NULL, pll1, NULL);
-
-	pll2 = ioremap(DAVINCI_PLL2_BASE, SZ_1K);
-	dm365_pll2_init(NULL, pll2, NULL);
-
-	psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
-	dm365_psc_init(NULL, psc);
-
-	clk = clk_get(NULL, "timer0");
-	if (WARN_ON(IS_ERR(clk))) {
-		pr_err("Unable to get the timer clock\n");
-		return;
-	}
-
-	rv = davinci_timer_register(clk, &dm365_timer_cfg);
-	WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-void __init dm365_register_clocks(void)
-{
-	/* all clocks are currently registered in dm365_init_time() */
-}
-
-static struct resource dm365_vpss_resources[] = {
-	{
-		/* VPSS ISP5 Base address */
-		.name           = "isp5",
-		.start          = 0x01c70000,
-		.end            = 0x01c70000 + 0xff,
-		.flags          = IORESOURCE_MEM,
-	},
-	{
-		/* VPSS CLK Base address */
-		.name           = "vpss",
-		.start          = 0x01c70200,
-		.end            = 0x01c70200 + 0xff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm365_vpss_device = {
-       .name                   = "vpss",
-       .id                     = -1,
-       .dev.platform_data      = "dm365_vpss",
-       .num_resources          = ARRAY_SIZE(dm365_vpss_resources),
-       .resource               = dm365_vpss_resources,
-};
-
-static struct resource vpfe_resources[] = {
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.flags          = IORESOURCE_IRQ,
-	},
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.flags          = IORESOURCE_IRQ,
-	},
-};
-
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
-static struct platform_device vpfe_capture_dev = {
-	.name           = CAPTURE_DRV_NAME,
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(vpfe_resources),
-	.resource       = vpfe_resources,
-	.dev = {
-		.dma_mask               = &vpfe_capture_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-};
-
-static void dm365_isif_setup_pinmux(void)
-{
-	davinci_cfg_reg(DM365_VIN_CAM_WEN);
-	davinci_cfg_reg(DM365_VIN_CAM_VD);
-	davinci_cfg_reg(DM365_VIN_CAM_HD);
-	davinci_cfg_reg(DM365_VIN_YIN4_7_EN);
-	davinci_cfg_reg(DM365_VIN_YIN0_3_EN);
-}
-
-static struct resource isif_resource[] = {
-	/* ISIF Base address */
-	{
-		.start          = 0x01c71000,
-		.end            = 0x01c71000 + 0x1ff,
-		.flags          = IORESOURCE_MEM,
-	},
-	/* ISIF Linearization table 0 */
-	{
-		.start          = 0x1C7C000,
-		.end            = 0x1C7C000 + 0x2ff,
-		.flags          = IORESOURCE_MEM,
-	},
-	/* ISIF Linearization table 1 */
-	{
-		.start          = 0x1C7C400,
-		.end            = 0x1C7C400 + 0x2ff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-static struct platform_device dm365_isif_dev = {
-	.name           = "isif",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(isif_resource),
-	.resource       = isif_resource,
-	.dev = {
-		.dma_mask               = &vpfe_capture_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-		.platform_data		= dm365_isif_setup_pinmux,
-	},
-};
-
-static struct resource dm365_osd_resources[] = {
-	{
-		.start = DM365_OSD_BASE,
-		.end   = DM365_OSD_BASE + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static u64 dm365_video_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device dm365_osd_dev = {
-	.name		= DM365_VPBE_OSD_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm365_osd_resources),
-	.resource	= dm365_osd_resources,
-	.dev		= {
-		.dma_mask		= &dm365_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource dm365_venc_resources[] = {
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.end   = DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.flags = IORESOURCE_IRQ,
-	},
-	/* venc registers io space */
-	{
-		.start = DM365_VENC_BASE,
-		.end   = DM365_VENC_BASE + 0x177,
-		.flags = IORESOURCE_MEM,
-	},
-	/* vdaccfg registers io space */
-	{
-		.start = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG,
-		.end   = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct resource dm365_v4l2_disp_resources[] = {
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.end   = DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.flags = IORESOURCE_IRQ,
-	},
-	/* venc registers io space */
-	{
-		.start = DM365_VENC_BASE,
-		.end   = DM365_VENC_BASE + 0x177,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static int dm365_vpbe_setup_pinmux(u32 if_type, int field)
-{
-	switch (if_type) {
-	case MEDIA_BUS_FMT_SGRBG8_1X8:
-		davinci_cfg_reg(DM365_VOUT_FIELD_G81);
-		davinci_cfg_reg(DM365_VOUT_COUTL_EN);
-		davinci_cfg_reg(DM365_VOUT_COUTH_EN);
-		break;
-	case MEDIA_BUS_FMT_YUYV10_1X20:
-		if (field)
-			davinci_cfg_reg(DM365_VOUT_FIELD);
-		else
-			davinci_cfg_reg(DM365_VOUT_FIELD_G81);
-		davinci_cfg_reg(DM365_VOUT_COUTL_EN);
-		davinci_cfg_reg(DM365_VOUT_COUTH_EN);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int dm365_venc_setup_clock(enum vpbe_enc_timings_type type,
-				  unsigned int pclock)
-{
-	void __iomem *vpss_clkctl_reg;
-	u32 val;
-
-	vpss_clkctl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL);
-
-	switch (type) {
-	case VPBE_ENC_STD:
-		val = VPSS_VENCCLKEN_ENABLE | VPSS_DACCLKEN_ENABLE;
-		break;
-	case VPBE_ENC_DV_TIMINGS:
-		if (pclock <= 27000000) {
-			val = VPSS_VENCCLKEN_ENABLE | VPSS_DACCLKEN_ENABLE;
-		} else {
-			/* set sysclk4 to output 74.25 MHz from pll1 */
-			val = VPSS_PLLC2SYSCLK5_ENABLE | VPSS_DACCLKEN_ENABLE |
-			      VPSS_VENCCLKEN_ENABLE;
-		}
-		break;
-	default:
-		return -EINVAL;
-	}
-	writel(val, vpss_clkctl_reg);
-
-	return 0;
-}
-
-static struct platform_device dm365_vpbe_display = {
-	.name		= "vpbe-v4l2",
-	.id		= -1,
-	.num_resources  = ARRAY_SIZE(dm365_v4l2_disp_resources),
-	.resource	= dm365_v4l2_disp_resources,
-	.dev		= {
-		.dma_mask		= &dm365_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct venc_platform_data dm365_venc_pdata = {
-	.setup_pinmux	= dm365_vpbe_setup_pinmux,
-	.setup_clock	= dm365_venc_setup_clock,
-};
-
-static struct platform_device dm365_venc_dev = {
-	.name		= DM365_VPBE_VENC_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm365_venc_resources),
-	.resource	= dm365_venc_resources,
-	.dev		= {
-		.dma_mask		= &dm365_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= (void *)&dm365_venc_pdata,
-	},
-};
-
-static struct platform_device dm365_vpbe_dev = {
-	.name		= "vpbe_controller",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &dm365_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-int __init dm365_init_video(struct vpfe_config *vpfe_cfg,
-				struct vpbe_config *vpbe_cfg)
-{
-	if (vpfe_cfg || vpbe_cfg)
-		platform_device_register(&dm365_vpss_device);
-
-	if (vpfe_cfg) {
-		vpfe_capture_dev.dev.platform_data = vpfe_cfg;
-		platform_device_register(&dm365_isif_dev);
-		platform_device_register(&vpfe_capture_dev);
-	}
-	if (vpbe_cfg) {
-		dm365_vpbe_dev.dev.platform_data = vpbe_cfg;
-		platform_device_register(&dm365_osd_dev);
-		platform_device_register(&dm365_venc_dev);
-		platform_device_register(&dm365_vpbe_dev);
-		platform_device_register(&dm365_vpbe_display);
-	}
-
-	return 0;
-}
-
-static const struct davinci_aintc_config dm365_aintc_config = {
-	.reg = {
-		.start		= DAVINCI_ARM_INTC_BASE,
-		.end		= DAVINCI_ARM_INTC_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	.num_irqs		= 64,
-	.prios			= dm365_default_priorities,
-};
-
-void __init dm365_init_irq(void)
-{
-	davinci_aintc_init(&dm365_aintc_config);
-}
-
-static int __init dm365_init_devices(void)
-{
-	struct platform_device *edma_pdev;
-	int ret = 0;
-
-	if (!cpu_is_davinci_dm365())
-		return 0;
-
-	davinci_cfg_reg(DM365_INT_EDMA_CC);
-	edma_pdev = platform_device_register_full(&dm365_edma_device);
-	if (IS_ERR(edma_pdev)) {
-		pr_warn("%s: Failed to register eDMA\n", __func__);
-		return PTR_ERR(edma_pdev);
-	}
-
-	platform_device_register(&dm365_mdio_device);
-	platform_device_register(&dm365_emac_device);
-
-	ret = davinci_init_wdt();
-	if (ret)
-		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
-
-	return ret;
-}
-postcore_initcall(dm365_init_devices);
diff --git a/arch/arm/mach-davinci/irqs.h b/arch/arm/mach-davinci/irqs.h
index 8f9fc7a56ce8..23e8da5025ab 100644
--- a/arch/arm/mach-davinci/irqs.h
+++ b/arch/arm/mach-davinci/irqs.h
@@ -27,219 +27,6 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
-/* Base address */
-#define DAVINCI_ARM_INTC_BASE 0x01C48000
-
-/* Interrupt lines */
-#define IRQ_VDINT0       0
-#define IRQ_VDINT1       1
-#define IRQ_VDINT2       2
-#define IRQ_HISTINT      3
-#define IRQ_H3AINT       4
-#define IRQ_PRVUINT      5
-#define IRQ_RSZINT       6
-#define IRQ_VFOCINT      7
-#define IRQ_VENCINT      8
-#define IRQ_ASQINT       9
-#define IRQ_IMXINT       10
-#define IRQ_VLCDINT      11
-#define IRQ_USBINT       12
-#define IRQ_EMACINT      13
-
-#define IRQ_CCINT0       16
-#define IRQ_CCERRINT     17
-#define IRQ_TCERRINT0    18
-#define IRQ_TCERRINT     19
-#define IRQ_PSCIN        20
-
-#define IRQ_IDE          22
-#define IRQ_HPIINT       23
-#define IRQ_MBXINT       24
-#define IRQ_MBRINT       25
-#define IRQ_MMCINT       26
-#define IRQ_SDIOINT      27
-#define IRQ_MSINT        28
-#define IRQ_DDRINT       29
-#define IRQ_AEMIFINT     30
-#define IRQ_VLQINT       31
-#define IRQ_TINT0_TINT12 32
-#define IRQ_TINT0_TINT34 33
-#define IRQ_TINT1_TINT12 34
-#define IRQ_TINT1_TINT34 35
-#define IRQ_PWMINT0      36
-#define IRQ_PWMINT1      37
-#define IRQ_PWMINT2      38
-#define IRQ_I2C          39
-#define IRQ_UARTINT0     40
-#define IRQ_UARTINT1     41
-#define IRQ_UARTINT2     42
-#define IRQ_SPINT0       43
-#define IRQ_SPINT1       44
-
-#define IRQ_DSP2ARM0     46
-#define IRQ_DSP2ARM1     47
-#define IRQ_GPIO0        48
-#define IRQ_GPIO1        49
-#define IRQ_GPIO2        50
-#define IRQ_GPIO3        51
-#define IRQ_GPIO4        52
-#define IRQ_GPIO5        53
-#define IRQ_GPIO6        54
-#define IRQ_GPIO7        55
-#define IRQ_GPIOBNK0     56
-#define IRQ_GPIOBNK1     57
-#define IRQ_GPIOBNK2     58
-#define IRQ_GPIOBNK3     59
-#define IRQ_GPIOBNK4     60
-#define IRQ_COMMTX       61
-#define IRQ_COMMRX       62
-#define IRQ_EMUINT       63
-
-#define DAVINCI_N_AINTC_IRQ	64
-
-#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
-
-/* DaVinci DM6467-specific Interrupts */
-#define IRQ_DM646X_VP_VERTINT0  0
-#define IRQ_DM646X_VP_VERTINT1  1
-#define IRQ_DM646X_VP_VERTINT2  2
-#define IRQ_DM646X_VP_VERTINT3  3
-#define IRQ_DM646X_VP_ERRINT    4
-#define IRQ_DM646X_RESERVED_1   5
-#define IRQ_DM646X_RESERVED_2   6
-#define IRQ_DM646X_WDINT        7
-#define IRQ_DM646X_CRGENINT0    8
-#define IRQ_DM646X_CRGENINT1    9
-#define IRQ_DM646X_TSIFINT0     10
-#define IRQ_DM646X_TSIFINT1     11
-#define IRQ_DM646X_VDCEINT      12
-#define IRQ_DM646X_USBINT       13
-#define IRQ_DM646X_USBDMAINT    14
-#define IRQ_DM646X_PCIINT       15
-#define IRQ_DM646X_TCERRINT2    20
-#define IRQ_DM646X_TCERRINT3    21
-#define IRQ_DM646X_IDE          22
-#define IRQ_DM646X_HPIINT       23
-#define IRQ_DM646X_EMACRXTHINT  24
-#define IRQ_DM646X_EMACRXINT    25
-#define IRQ_DM646X_EMACTXINT    26
-#define IRQ_DM646X_EMACMISCINT  27
-#define IRQ_DM646X_MCASP0TXINT  28
-#define IRQ_DM646X_MCASP0RXINT  29
-#define IRQ_DM646X_MCASP1TXINT  30
-#define IRQ_DM646X_RESERVED_3   31
-#define IRQ_DM646X_VLQINT       38
-#define IRQ_DM646X_UARTINT2     42
-#define IRQ_DM646X_SPINT0       43
-#define IRQ_DM646X_SPINT1       44
-#define IRQ_DM646X_DSP2ARMINT   45
-#define IRQ_DM646X_RESERVED_4   46
-#define IRQ_DM646X_PSCINT       47
-#define IRQ_DM646X_GPIO0        48
-#define IRQ_DM646X_GPIO1        49
-#define IRQ_DM646X_GPIO2        50
-#define IRQ_DM646X_GPIO3        51
-#define IRQ_DM646X_GPIO4        52
-#define IRQ_DM646X_GPIO5        53
-#define IRQ_DM646X_GPIO6        54
-#define IRQ_DM646X_GPIO7        55
-#define IRQ_DM646X_GPIOBNK0     56
-#define IRQ_DM646X_GPIOBNK1     57
-#define IRQ_DM646X_GPIOBNK2     58
-#define IRQ_DM646X_DDRINT       59
-#define IRQ_DM646X_AEMIFINT     60
-
-/* DaVinci DM355-specific Interrupts */
-#define IRQ_DM355_CCDC_VDINT0	0
-#define IRQ_DM355_CCDC_VDINT1	1
-#define IRQ_DM355_CCDC_VDINT2	2
-#define IRQ_DM355_IPIPE_HST	3
-#define IRQ_DM355_H3AINT	4
-#define IRQ_DM355_IPIPE_SDR	5
-#define IRQ_DM355_IPIPEIFINT	6
-#define IRQ_DM355_OSDINT	7
-#define IRQ_DM355_VENCINT	8
-#define IRQ_DM355_IMCOPINT	11
-#define IRQ_DM355_RTOINT	13
-#define IRQ_DM355_TINT4		13
-#define IRQ_DM355_TINT2_TINT12	13
-#define IRQ_DM355_UARTINT2	14
-#define IRQ_DM355_TINT5		14
-#define IRQ_DM355_TINT2_TINT34	14
-#define IRQ_DM355_TINT6		15
-#define IRQ_DM355_TINT3_TINT12	15
-#define IRQ_DM355_SPINT1_0	17
-#define IRQ_DM355_SPINT1_1	18
-#define IRQ_DM355_SPINT2_0	19
-#define IRQ_DM355_SPINT2_1	21
-#define IRQ_DM355_TINT7		22
-#define IRQ_DM355_TINT3_TINT34	22
-#define IRQ_DM355_SDIOINT0	23
-#define IRQ_DM355_MMCINT0	26
-#define IRQ_DM355_MSINT		26
-#define IRQ_DM355_MMCINT1	27
-#define IRQ_DM355_PWMINT3	28
-#define IRQ_DM355_SDIOINT1	31
-#define IRQ_DM355_SPINT0_0	42
-#define IRQ_DM355_SPINT0_1	43
-#define IRQ_DM355_GPIO0		44
-#define IRQ_DM355_GPIO1		45
-#define IRQ_DM355_GPIO2		46
-#define IRQ_DM355_GPIO3		47
-#define IRQ_DM355_GPIO4		48
-#define IRQ_DM355_GPIO5		49
-#define IRQ_DM355_GPIO6		50
-#define IRQ_DM355_GPIO7		51
-#define IRQ_DM355_GPIO8		52
-#define IRQ_DM355_GPIO9		53
-#define IRQ_DM355_GPIOBNK0	54
-#define IRQ_DM355_GPIOBNK1	55
-#define IRQ_DM355_GPIOBNK2	56
-#define IRQ_DM355_GPIOBNK3	57
-#define IRQ_DM355_GPIOBNK4	58
-#define IRQ_DM355_GPIOBNK5	59
-#define IRQ_DM355_GPIOBNK6	60
-
-/* DaVinci DM365-specific Interrupts */
-#define IRQ_DM365_INSFINT	7
-#define IRQ_DM365_IMXINT1	8
-#define IRQ_DM365_IMXINT0	10
-#define IRQ_DM365_KLD_ARMINT	10
-#define IRQ_DM365_IMCOPINT	11
-#define IRQ_DM365_RTOINT	13
-#define IRQ_DM365_TINT5		14
-#define IRQ_DM365_TINT6		15
-#define IRQ_DM365_SPINT2_1	21
-#define IRQ_DM365_TINT7		22
-#define IRQ_DM365_SDIOINT0	23
-#define IRQ_DM365_MMCINT1	27
-#define IRQ_DM365_PWMINT3	28
-#define IRQ_DM365_RTCINT	29
-#define IRQ_DM365_SDIOINT1	31
-#define IRQ_DM365_SPIINT0_0	42
-#define IRQ_DM365_SPIINT3_0	43
-#define IRQ_DM365_GPIO0		44
-#define IRQ_DM365_GPIO1		45
-#define IRQ_DM365_GPIO2		46
-#define IRQ_DM365_GPIO3		47
-#define IRQ_DM365_GPIO4		48
-#define IRQ_DM365_GPIO5		49
-#define IRQ_DM365_GPIO6		50
-#define IRQ_DM365_GPIO7		51
-#define IRQ_DM365_EMAC_RXTHRESH	52
-#define IRQ_DM365_EMAC_RXPULSE	53
-#define IRQ_DM365_EMAC_TXPULSE	54
-#define IRQ_DM365_EMAC_MISCPULSE 55
-#define IRQ_DM365_GPIO12	56
-#define IRQ_DM365_GPIO13	57
-#define IRQ_DM365_GPIO14	58
-#define IRQ_DM365_GPIO15	59
-#define IRQ_DM365_ADCINT	59
-#define IRQ_DM365_KEYINT	60
-#define IRQ_DM365_TCERRINT2	61
-#define IRQ_DM365_TCERRINT3	62
-#define IRQ_DM365_EMUINT	63
-
 /* DA8XX interrupts */
 #define IRQ_DA8XX_COMMTX		0
 #define IRQ_DA8XX_COMMRX		1
@@ -314,33 +101,6 @@
 #define IRQ_DA8XX_ECAP2			71
 #define IRQ_DA8XX_ARMCLKSTOPREQ		90
 
-/* DA830 specific interrupts */
-#define IRQ_DA830_MPUERR		27
-#define IRQ_DA830_IOPUERR		27
-#define IRQ_DA830_BOOTCFGERR		27
-#define IRQ_DA830_EHRPWM2		67
-#define IRQ_DA830_EHRPWM2TZ		68
-#define IRQ_DA830_EQEP0			72
-#define IRQ_DA830_EQEP1			73
-#define IRQ_DA830_T12CMPINT0_0		74
-#define IRQ_DA830_T12CMPINT1_0		75
-#define IRQ_DA830_T12CMPINT2_0		76
-#define IRQ_DA830_T12CMPINT3_0		77
-#define IRQ_DA830_T12CMPINT4_0		78
-#define IRQ_DA830_T12CMPINT5_0		79
-#define IRQ_DA830_T12CMPINT6_0		80
-#define IRQ_DA830_T12CMPINT7_0		81
-#define IRQ_DA830_T12CMPINT0_1		82
-#define IRQ_DA830_T12CMPINT1_1		83
-#define IRQ_DA830_T12CMPINT2_1		84
-#define IRQ_DA830_T12CMPINT3_1		85
-#define IRQ_DA830_T12CMPINT4_1		86
-#define IRQ_DA830_T12CMPINT5_1		87
-#define IRQ_DA830_T12CMPINT6_1		88
-#define IRQ_DA830_T12CMPINT7_1		89
-
-#define DA830_N_CP_INTC_IRQ		96
-
 /* DA850 speicific interrupts */
 #define IRQ_DA850_MPUADDRERR0		27
 #define IRQ_DA850_MPUPROTERR0		27
@@ -398,8 +158,4 @@
 
 #define DA850_N_CP_INTC_IRQ		101
 
-/* da850 currently has the most gpio pins (144) */
-#define DAVINCI_N_GPIO			144
-/* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */
-
 #endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index 814a6b714010..37de35eb6e8b 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -97,18 +97,3 @@ int davinci_cfg_reg(const unsigned long index)
 
 	return 0;
 }
-EXPORT_SYMBOL(davinci_cfg_reg);
-
-int davinci_cfg_reg_list(const short pins[])
-{
-	int i, error = -EINVAL;
-
-	if (pins)
-		for (i = 0; pins[i] >= 0; i++) {
-			error = davinci_cfg_reg(pins[i]);
-			if (error)
-				break;
-		}
-
-	return error;
-}
diff --git a/arch/arm/mach-davinci/mux.h b/arch/arm/mach-davinci/mux.h
index b5effe16402c..6325ea5a2730 100644
--- a/arch/arm/mach-davinci/mux.h
+++ b/arch/arm/mach-davinci/mux.h
@@ -21,725 +21,6 @@ struct mux_config {
 	bool debug;
 };
 
-enum davinci_dm644x_index {
-	/* ATA and HDDIR functions */
-	DM644X_HDIREN,
-	DM644X_ATAEN,
-	DM644X_ATAEN_DISABLE,
-
-	/* HPI functions */
-	DM644X_HPIEN_DISABLE,
-
-	/* AEAW functions */
-	DM644X_AEAW,
-	DM644X_AEAW0,
-	DM644X_AEAW1,
-	DM644X_AEAW2,
-	DM644X_AEAW3,
-	DM644X_AEAW4,
-
-	/* Memory Stick */
-	DM644X_MSTK,
-
-	/* I2C */
-	DM644X_I2C,
-
-	/* ASP function */
-	DM644X_MCBSP,
-
-	/* UART1 */
-	DM644X_UART1,
-
-	/* UART2 */
-	DM644X_UART2,
-
-	/* PWM0 */
-	DM644X_PWM0,
-
-	/* PWM1 */
-	DM644X_PWM1,
-
-	/* PWM2 */
-	DM644X_PWM2,
-
-	/* VLYNQ function */
-	DM644X_VLYNQEN,
-	DM644X_VLSCREN,
-	DM644X_VLYNQWD,
-
-	/* EMAC and MDIO function */
-	DM644X_EMACEN,
-
-	/* GPIO3V[0:16] pins */
-	DM644X_GPIO3V,
-
-	/* GPIO pins */
-	DM644X_GPIO0,
-	DM644X_GPIO3,
-	DM644X_GPIO43_44,
-	DM644X_GPIO46_47,
-
-	/* VPBE */
-	DM644X_RGB666,
-
-	/* LCD */
-	DM644X_LOEEN,
-	DM644X_LFLDEN,
-};
-
-enum davinci_dm646x_index {
-	/* ATA function */
-	DM646X_ATAEN,
-
-	/* AUDIO Clock */
-	DM646X_AUDCK1,
-	DM646X_AUDCK0,
-
-	/* CRGEN Control */
-	DM646X_CRGMUX,
-
-	/* VPIF Control */
-	DM646X_STSOMUX_DISABLE,
-	DM646X_STSIMUX_DISABLE,
-	DM646X_PTSOMUX_DISABLE,
-	DM646X_PTSIMUX_DISABLE,
-
-	/* TSIF Control */
-	DM646X_STSOMUX,
-	DM646X_STSIMUX,
-	DM646X_PTSOMUX_PARALLEL,
-	DM646X_PTSIMUX_PARALLEL,
-	DM646X_PTSOMUX_SERIAL,
-	DM646X_PTSIMUX_SERIAL,
-};
-
-enum davinci_dm355_index {
-	/* MMC/SD 0 */
-	DM355_MMCSD0,
-
-	/* MMC/SD 1 */
-	DM355_SD1_CLK,
-	DM355_SD1_CMD,
-	DM355_SD1_DATA3,
-	DM355_SD1_DATA2,
-	DM355_SD1_DATA1,
-	DM355_SD1_DATA0,
-
-	/* I2C */
-	DM355_I2C_SDA,
-	DM355_I2C_SCL,
-
-	/* ASP0 function */
-	DM355_MCBSP0_BDX,
-	DM355_MCBSP0_X,
-	DM355_MCBSP0_BFSX,
-	DM355_MCBSP0_BDR,
-	DM355_MCBSP0_R,
-	DM355_MCBSP0_BFSR,
-
-	/* SPI0 */
-	DM355_SPI0_SDI,
-	DM355_SPI0_SDENA0,
-	DM355_SPI0_SDENA1,
-
-	/* IRQ muxing */
-	DM355_INT_EDMA_CC,
-	DM355_INT_EDMA_TC0_ERR,
-	DM355_INT_EDMA_TC1_ERR,
-
-	/* EDMA event muxing */
-	DM355_EVT8_ASP1_TX,
-	DM355_EVT9_ASP1_RX,
-	DM355_EVT26_MMC0_RX,
-
-	/* Video Out */
-	DM355_VOUT_FIELD,
-	DM355_VOUT_FIELD_G70,
-	DM355_VOUT_HVSYNC,
-	DM355_VOUT_COUTL_EN,
-	DM355_VOUT_COUTH_EN,
-
-	/* Video In Pin Mux */
-	DM355_VIN_PCLK,
-	DM355_VIN_CAM_WEN,
-	DM355_VIN_CAM_VD,
-	DM355_VIN_CAM_HD,
-	DM355_VIN_YIN_EN,
-	DM355_VIN_CINL_EN,
-	DM355_VIN_CINH_EN,
-};
-
-enum davinci_dm365_index {
-	/* MMC/SD 0 */
-	DM365_MMCSD0,
-
-	/* MMC/SD 1 */
-	DM365_SD1_CLK,
-	DM365_SD1_CMD,
-	DM365_SD1_DATA3,
-	DM365_SD1_DATA2,
-	DM365_SD1_DATA1,
-	DM365_SD1_DATA0,
-
-	/* I2C */
-	DM365_I2C_SDA,
-	DM365_I2C_SCL,
-
-	/* AEMIF */
-	DM365_AEMIF_AR_A14,
-	DM365_AEMIF_AR_BA0,
-	DM365_AEMIF_A3,
-	DM365_AEMIF_A7,
-	DM365_AEMIF_D15_8,
-	DM365_AEMIF_CE0,
-	DM365_AEMIF_CE1,
-	DM365_AEMIF_WE_OE,
-
-	/* ASP0 function */
-	DM365_MCBSP0_BDX,
-	DM365_MCBSP0_X,
-	DM365_MCBSP0_BFSX,
-	DM365_MCBSP0_BDR,
-	DM365_MCBSP0_R,
-	DM365_MCBSP0_BFSR,
-
-	/* SPI0 */
-	DM365_SPI0_SCLK,
-	DM365_SPI0_SDI,
-	DM365_SPI0_SDO,
-	DM365_SPI0_SDENA0,
-	DM365_SPI0_SDENA1,
-
-	/* UART */
-	DM365_UART0_RXD,
-	DM365_UART0_TXD,
-	DM365_UART1_RXD,
-	DM365_UART1_TXD,
-	DM365_UART1_RTS,
-	DM365_UART1_CTS,
-
-	/* EMAC */
-	DM365_EMAC_TX_EN,
-	DM365_EMAC_TX_CLK,
-	DM365_EMAC_COL,
-	DM365_EMAC_TXD3,
-	DM365_EMAC_TXD2,
-	DM365_EMAC_TXD1,
-	DM365_EMAC_TXD0,
-	DM365_EMAC_RXD3,
-	DM365_EMAC_RXD2,
-	DM365_EMAC_RXD1,
-	DM365_EMAC_RXD0,
-	DM365_EMAC_RX_CLK,
-	DM365_EMAC_RX_DV,
-	DM365_EMAC_RX_ER,
-	DM365_EMAC_CRS,
-	DM365_EMAC_MDIO,
-	DM365_EMAC_MDCLK,
-
-	/* Key Scan */
-	DM365_KEYSCAN,
-
-	/* PWM */
-	DM365_PWM0,
-	DM365_PWM0_G23,
-	DM365_PWM1,
-	DM365_PWM1_G25,
-	DM365_PWM2_G87,
-	DM365_PWM2_G88,
-	DM365_PWM2_G89,
-	DM365_PWM2_G90,
-	DM365_PWM3_G80,
-	DM365_PWM3_G81,
-	DM365_PWM3_G85,
-	DM365_PWM3_G86,
-
-	/* SPI1 */
-	DM365_SPI1_SCLK,
-	DM365_SPI1_SDO,
-	DM365_SPI1_SDI,
-	DM365_SPI1_SDENA0,
-	DM365_SPI1_SDENA1,
-
-	/* SPI2 */
-	DM365_SPI2_SCLK,
-	DM365_SPI2_SDO,
-	DM365_SPI2_SDI,
-	DM365_SPI2_SDENA0,
-	DM365_SPI2_SDENA1,
-
-	/* SPI3 */
-	DM365_SPI3_SCLK,
-	DM365_SPI3_SDO,
-	DM365_SPI3_SDI,
-	DM365_SPI3_SDENA0,
-	DM365_SPI3_SDENA1,
-
-	/* SPI4 */
-	DM365_SPI4_SCLK,
-	DM365_SPI4_SDO,
-	DM365_SPI4_SDI,
-	DM365_SPI4_SDENA0,
-	DM365_SPI4_SDENA1,
-
-	/* Clock */
-	DM365_CLKOUT0,
-	DM365_CLKOUT1,
-	DM365_CLKOUT2,
-
-	/* GPIO */
-	DM365_GPIO20,
-	DM365_GPIO30,
-	DM365_GPIO31,
-	DM365_GPIO32,
-	DM365_GPIO33,
-	DM365_GPIO40,
-	DM365_GPIO64_57,
-
-	/* Video */
-	DM365_VOUT_FIELD,
-	DM365_VOUT_FIELD_G81,
-	DM365_VOUT_HVSYNC,
-	DM365_VOUT_COUTL_EN,
-	DM365_VOUT_COUTH_EN,
-	DM365_VIN_CAM_WEN,
-	DM365_VIN_CAM_VD,
-	DM365_VIN_CAM_HD,
-	DM365_VIN_YIN4_7_EN,
-	DM365_VIN_YIN0_3_EN,
-
-	/* IRQ muxing */
-	DM365_INT_EDMA_CC,
-	DM365_INT_EDMA_TC0_ERR,
-	DM365_INT_EDMA_TC1_ERR,
-	DM365_INT_EDMA_TC2_ERR,
-	DM365_INT_EDMA_TC3_ERR,
-	DM365_INT_PRTCSS,
-	DM365_INT_EMAC_RXTHRESH,
-	DM365_INT_EMAC_RXPULSE,
-	DM365_INT_EMAC_TXPULSE,
-	DM365_INT_EMAC_MISCPULSE,
-	DM365_INT_IMX0_ENABLE,
-	DM365_INT_IMX0_DISABLE,
-	DM365_INT_HDVICP_ENABLE,
-	DM365_INT_HDVICP_DISABLE,
-	DM365_INT_IMX1_ENABLE,
-	DM365_INT_IMX1_DISABLE,
-	DM365_INT_NSF_ENABLE,
-	DM365_INT_NSF_DISABLE,
-
-	/* EDMA event muxing */
-	DM365_EVT2_ASP_TX,
-	DM365_EVT3_ASP_RX,
-	DM365_EVT2_VC_TX,
-	DM365_EVT3_VC_RX,
-	DM365_EVT26_MMC0_RX,
-};
-
-enum da830_index {
-	DA830_GPIO7_14,
-	DA830_RTCK,
-	DA830_GPIO7_15,
-	DA830_EMU_0,
-	DA830_EMB_SDCKE,
-	DA830_EMB_CLK_GLUE,
-	DA830_EMB_CLK,
-	DA830_NEMB_CS_0,
-	DA830_NEMB_CAS,
-	DA830_NEMB_RAS,
-	DA830_NEMB_WE,
-	DA830_EMB_BA_1,
-	DA830_EMB_BA_0,
-	DA830_EMB_A_0,
-	DA830_EMB_A_1,
-	DA830_EMB_A_2,
-	DA830_EMB_A_3,
-	DA830_EMB_A_4,
-	DA830_EMB_A_5,
-	DA830_GPIO7_0,
-	DA830_GPIO7_1,
-	DA830_GPIO7_2,
-	DA830_GPIO7_3,
-	DA830_GPIO7_4,
-	DA830_GPIO7_5,
-	DA830_GPIO7_6,
-	DA830_GPIO7_7,
-	DA830_EMB_A_6,
-	DA830_EMB_A_7,
-	DA830_EMB_A_8,
-	DA830_EMB_A_9,
-	DA830_EMB_A_10,
-	DA830_EMB_A_11,
-	DA830_EMB_A_12,
-	DA830_EMB_D_31,
-	DA830_GPIO7_8,
-	DA830_GPIO7_9,
-	DA830_GPIO7_10,
-	DA830_GPIO7_11,
-	DA830_GPIO7_12,
-	DA830_GPIO7_13,
-	DA830_GPIO3_13,
-	DA830_EMB_D_30,
-	DA830_EMB_D_29,
-	DA830_EMB_D_28,
-	DA830_EMB_D_27,
-	DA830_EMB_D_26,
-	DA830_EMB_D_25,
-	DA830_EMB_D_24,
-	DA830_EMB_D_23,
-	DA830_EMB_D_22,
-	DA830_EMB_D_21,
-	DA830_EMB_D_20,
-	DA830_EMB_D_19,
-	DA830_EMB_D_18,
-	DA830_EMB_D_17,
-	DA830_EMB_D_16,
-	DA830_NEMB_WE_DQM_3,
-	DA830_NEMB_WE_DQM_2,
-	DA830_EMB_D_0,
-	DA830_EMB_D_1,
-	DA830_EMB_D_2,
-	DA830_EMB_D_3,
-	DA830_EMB_D_4,
-	DA830_EMB_D_5,
-	DA830_EMB_D_6,
-	DA830_GPIO6_0,
-	DA830_GPIO6_1,
-	DA830_GPIO6_2,
-	DA830_GPIO6_3,
-	DA830_GPIO6_4,
-	DA830_GPIO6_5,
-	DA830_GPIO6_6,
-	DA830_EMB_D_7,
-	DA830_EMB_D_8,
-	DA830_EMB_D_9,
-	DA830_EMB_D_10,
-	DA830_EMB_D_11,
-	DA830_EMB_D_12,
-	DA830_EMB_D_13,
-	DA830_EMB_D_14,
-	DA830_GPIO6_7,
-	DA830_GPIO6_8,
-	DA830_GPIO6_9,
-	DA830_GPIO6_10,
-	DA830_GPIO6_11,
-	DA830_GPIO6_12,
-	DA830_GPIO6_13,
-	DA830_GPIO6_14,
-	DA830_EMB_D_15,
-	DA830_NEMB_WE_DQM_1,
-	DA830_NEMB_WE_DQM_0,
-	DA830_SPI0_SOMI_0,
-	DA830_SPI0_SIMO_0,
-	DA830_SPI0_CLK,
-	DA830_NSPI0_ENA,
-	DA830_NSPI0_SCS_0,
-	DA830_EQEP0I,
-	DA830_EQEP0S,
-	DA830_EQEP1I,
-	DA830_NUART0_CTS,
-	DA830_NUART0_RTS,
-	DA830_EQEP0A,
-	DA830_EQEP0B,
-	DA830_GPIO6_15,
-	DA830_GPIO5_14,
-	DA830_GPIO5_15,
-	DA830_GPIO5_0,
-	DA830_GPIO5_1,
-	DA830_GPIO5_2,
-	DA830_GPIO5_3,
-	DA830_GPIO5_4,
-	DA830_SPI1_SOMI_0,
-	DA830_SPI1_SIMO_0,
-	DA830_SPI1_CLK,
-	DA830_UART0_RXD,
-	DA830_UART0_TXD,
-	DA830_AXR1_10,
-	DA830_AXR1_11,
-	DA830_NSPI1_ENA,
-	DA830_I2C1_SCL,
-	DA830_I2C1_SDA,
-	DA830_EQEP1S,
-	DA830_I2C0_SDA,
-	DA830_I2C0_SCL,
-	DA830_UART2_RXD,
-	DA830_TM64P0_IN12,
-	DA830_TM64P0_OUT12,
-	DA830_GPIO5_5,
-	DA830_GPIO5_6,
-	DA830_GPIO5_7,
-	DA830_GPIO5_8,
-	DA830_GPIO5_9,
-	DA830_GPIO5_10,
-	DA830_GPIO5_11,
-	DA830_GPIO5_12,
-	DA830_NSPI1_SCS_0,
-	DA830_USB0_DRVVBUS,
-	DA830_AHCLKX0,
-	DA830_ACLKX0,
-	DA830_AFSX0,
-	DA830_AHCLKR0,
-	DA830_ACLKR0,
-	DA830_AFSR0,
-	DA830_UART2_TXD,
-	DA830_AHCLKX2,
-	DA830_ECAP0_APWM0,
-	DA830_RMII_MHZ_50_CLK,
-	DA830_ECAP1_APWM1,
-	DA830_USB_REFCLKIN,
-	DA830_GPIO5_13,
-	DA830_GPIO4_15,
-	DA830_GPIO2_11,
-	DA830_GPIO2_12,
-	DA830_GPIO2_13,
-	DA830_GPIO2_14,
-	DA830_GPIO2_15,
-	DA830_GPIO3_12,
-	DA830_AMUTE0,
-	DA830_AXR0_0,
-	DA830_AXR0_1,
-	DA830_AXR0_2,
-	DA830_AXR0_3,
-	DA830_AXR0_4,
-	DA830_AXR0_5,
-	DA830_AXR0_6,
-	DA830_RMII_TXD_0,
-	DA830_RMII_TXD_1,
-	DA830_RMII_TXEN,
-	DA830_RMII_CRS_DV,
-	DA830_RMII_RXD_0,
-	DA830_RMII_RXD_1,
-	DA830_RMII_RXER,
-	DA830_AFSR2,
-	DA830_ACLKX2,
-	DA830_AXR2_3,
-	DA830_AXR2_2,
-	DA830_AXR2_1,
-	DA830_AFSX2,
-	DA830_ACLKR2,
-	DA830_NRESETOUT,
-	DA830_GPIO3_0,
-	DA830_GPIO3_1,
-	DA830_GPIO3_2,
-	DA830_GPIO3_3,
-	DA830_GPIO3_4,
-	DA830_GPIO3_5,
-	DA830_GPIO3_6,
-	DA830_AXR0_7,
-	DA830_AXR0_8,
-	DA830_UART1_RXD,
-	DA830_UART1_TXD,
-	DA830_AXR0_11,
-	DA830_AHCLKX1,
-	DA830_ACLKX1,
-	DA830_AFSX1,
-	DA830_MDIO_CLK,
-	DA830_MDIO_D,
-	DA830_AXR0_9,
-	DA830_AXR0_10,
-	DA830_EPWM0B,
-	DA830_EPWM0A,
-	DA830_EPWMSYNCI,
-	DA830_AXR2_0,
-	DA830_EPWMSYNC0,
-	DA830_GPIO3_7,
-	DA830_GPIO3_8,
-	DA830_GPIO3_9,
-	DA830_GPIO3_10,
-	DA830_GPIO3_11,
-	DA830_GPIO3_14,
-	DA830_GPIO3_15,
-	DA830_GPIO4_10,
-	DA830_AHCLKR1,
-	DA830_ACLKR1,
-	DA830_AFSR1,
-	DA830_AMUTE1,
-	DA830_AXR1_0,
-	DA830_AXR1_1,
-	DA830_AXR1_2,
-	DA830_AXR1_3,
-	DA830_ECAP2_APWM2,
-	DA830_EHRPWMGLUETZ,
-	DA830_EQEP1A,
-	DA830_GPIO4_11,
-	DA830_GPIO4_12,
-	DA830_GPIO4_13,
-	DA830_GPIO4_14,
-	DA830_GPIO4_0,
-	DA830_GPIO4_1,
-	DA830_GPIO4_2,
-	DA830_GPIO4_3,
-	DA830_AXR1_4,
-	DA830_AXR1_5,
-	DA830_AXR1_6,
-	DA830_AXR1_7,
-	DA830_AXR1_8,
-	DA830_AXR1_9,
-	DA830_EMA_D_0,
-	DA830_EMA_D_1,
-	DA830_EQEP1B,
-	DA830_EPWM2B,
-	DA830_EPWM2A,
-	DA830_EPWM1B,
-	DA830_EPWM1A,
-	DA830_MMCSD_DAT_0,
-	DA830_MMCSD_DAT_1,
-	DA830_UHPI_HD_0,
-	DA830_UHPI_HD_1,
-	DA830_GPIO4_4,
-	DA830_GPIO4_5,
-	DA830_GPIO4_6,
-	DA830_GPIO4_7,
-	DA830_GPIO4_8,
-	DA830_GPIO4_9,
-	DA830_GPIO0_0,
-	DA830_GPIO0_1,
-	DA830_EMA_D_2,
-	DA830_EMA_D_3,
-	DA830_EMA_D_4,
-	DA830_EMA_D_5,
-	DA830_EMA_D_6,
-	DA830_EMA_D_7,
-	DA830_EMA_D_8,
-	DA830_EMA_D_9,
-	DA830_MMCSD_DAT_2,
-	DA830_MMCSD_DAT_3,
-	DA830_MMCSD_DAT_4,
-	DA830_MMCSD_DAT_5,
-	DA830_MMCSD_DAT_6,
-	DA830_MMCSD_DAT_7,
-	DA830_UHPI_HD_8,
-	DA830_UHPI_HD_9,
-	DA830_UHPI_HD_2,
-	DA830_UHPI_HD_3,
-	DA830_UHPI_HD_4,
-	DA830_UHPI_HD_5,
-	DA830_UHPI_HD_6,
-	DA830_UHPI_HD_7,
-	DA830_LCD_D_8,
-	DA830_LCD_D_9,
-	DA830_GPIO0_2,
-	DA830_GPIO0_3,
-	DA830_GPIO0_4,
-	DA830_GPIO0_5,
-	DA830_GPIO0_6,
-	DA830_GPIO0_7,
-	DA830_GPIO0_8,
-	DA830_GPIO0_9,
-	DA830_EMA_D_10,
-	DA830_EMA_D_11,
-	DA830_EMA_D_12,
-	DA830_EMA_D_13,
-	DA830_EMA_D_14,
-	DA830_EMA_D_15,
-	DA830_EMA_A_0,
-	DA830_EMA_A_1,
-	DA830_UHPI_HD_10,
-	DA830_UHPI_HD_11,
-	DA830_UHPI_HD_12,
-	DA830_UHPI_HD_13,
-	DA830_UHPI_HD_14,
-	DA830_UHPI_HD_15,
-	DA830_LCD_D_7,
-	DA830_MMCSD_CLK,
-	DA830_LCD_D_10,
-	DA830_LCD_D_11,
-	DA830_LCD_D_12,
-	DA830_LCD_D_13,
-	DA830_LCD_D_14,
-	DA830_LCD_D_15,
-	DA830_UHPI_HCNTL0,
-	DA830_GPIO0_10,
-	DA830_GPIO0_11,
-	DA830_GPIO0_12,
-	DA830_GPIO0_13,
-	DA830_GPIO0_14,
-	DA830_GPIO0_15,
-	DA830_GPIO1_0,
-	DA830_GPIO1_1,
-	DA830_EMA_A_2,
-	DA830_EMA_A_3,
-	DA830_EMA_A_4,
-	DA830_EMA_A_5,
-	DA830_EMA_A_6,
-	DA830_EMA_A_7,
-	DA830_EMA_A_8,
-	DA830_EMA_A_9,
-	DA830_MMCSD_CMD,
-	DA830_LCD_D_6,
-	DA830_LCD_D_3,
-	DA830_LCD_D_2,
-	DA830_LCD_D_1,
-	DA830_LCD_D_0,
-	DA830_LCD_PCLK,
-	DA830_LCD_HSYNC,
-	DA830_UHPI_HCNTL1,
-	DA830_GPIO1_2,
-	DA830_GPIO1_3,
-	DA830_GPIO1_4,
-	DA830_GPIO1_5,
-	DA830_GPIO1_6,
-	DA830_GPIO1_7,
-	DA830_GPIO1_8,
-	DA830_GPIO1_9,
-	DA830_EMA_A_10,
-	DA830_EMA_A_11,
-	DA830_EMA_A_12,
-	DA830_EMA_BA_1,
-	DA830_EMA_BA_0,
-	DA830_EMA_CLK,
-	DA830_EMA_SDCKE,
-	DA830_NEMA_CAS,
-	DA830_LCD_VSYNC,
-	DA830_NLCD_AC_ENB_CS,
-	DA830_LCD_MCLK,
-	DA830_LCD_D_5,
-	DA830_LCD_D_4,
-	DA830_OBSCLK,
-	DA830_NEMA_CS_4,
-	DA830_UHPI_HHWIL,
-	DA830_AHCLKR2,
-	DA830_GPIO1_10,
-	DA830_GPIO1_11,
-	DA830_GPIO1_12,
-	DA830_GPIO1_13,
-	DA830_GPIO1_14,
-	DA830_GPIO1_15,
-	DA830_GPIO2_0,
-	DA830_GPIO2_1,
-	DA830_NEMA_RAS,
-	DA830_NEMA_WE,
-	DA830_NEMA_CS_0,
-	DA830_NEMA_CS_2,
-	DA830_NEMA_CS_3,
-	DA830_NEMA_OE,
-	DA830_NEMA_WE_DQM_1,
-	DA830_NEMA_WE_DQM_0,
-	DA830_NEMA_CS_5,
-	DA830_UHPI_HRNW,
-	DA830_NUHPI_HAS,
-	DA830_NUHPI_HCS,
-	DA830_NUHPI_HDS1,
-	DA830_NUHPI_HDS2,
-	DA830_NUHPI_HINT,
-	DA830_AXR0_12,
-	DA830_AMUTE2,
-	DA830_AXR0_13,
-	DA830_AXR0_14,
-	DA830_AXR0_15,
-	DA830_GPIO2_2,
-	DA830_GPIO2_3,
-	DA830_GPIO2_4,
-	DA830_GPIO2_5,
-	DA830_GPIO2_6,
-	DA830_GPIO2_7,
-	DA830_GPIO2_8,
-	DA830_GPIO2_9,
-	DA830_EMA_WAIT_0,
-	DA830_NUHPI_HRDY,
-	DA830_GPIO2_10,
-};
-
 enum davinci_da850_index {
 	/* UART0 function */
 	DA850_NUART0_CTS,
@@ -969,14 +250,9 @@ enum davinci_da850_index {
 #ifdef CONFIG_DAVINCI_MUX
 /* setup pin muxing */
 extern int davinci_cfg_reg(unsigned long reg_cfg);
-extern int davinci_cfg_reg_list(const short pins[]);
 #else
 /* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
 static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
-static inline int davinci_cfg_reg_list(const short pins[])
-{
-	return 0;
-}
 #endif
 
 
diff --git a/arch/arm/mach-davinci/pdata-quirks.c b/arch/arm/mach-davinci/pdata-quirks.c
index b8b5f1a5e092..b5b5c7bda61e 100644
--- a/arch/arm/mach-davinci/pdata-quirks.c
+++ b/arch/arm/mach-davinci/pdata-quirks.c
@@ -5,7 +5,7 @@
  * Copyright (C) 2016 BayLibre, Inc
  */
 #include <linux/kernel.h>
-#include <linux/of_platform.h>
+#include <linux/of.h>
 
 #include <media/i2c/tvp514x.h>
 #include <media/i2c/adv7343.h>
diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c
index 8aa39db095d7..2c5155bd376b 100644
--- a/arch/arm/mach-davinci/pm.c
+++ b/arch/arm/mach-davinci/pm.c
@@ -61,7 +61,7 @@ static void davinci_pm_suspend(void)
 
 	/* Configure sleep count in deep sleep register */
 	val = __raw_readl(pm_config.deepsleep_reg);
-	val &= ~DEEPSLEEP_SLEEPCOUNT_MASK,
+	val &= ~DEEPSLEEP_SLEEPCOUNT_MASK;
 	val |= pm_config.sleepcount;
 	__raw_writel(val, pm_config.deepsleep_reg);
 
diff --git a/arch/arm/mach-davinci/psc.h b/arch/arm/mach-davinci/psc.h
index 68cd9d3fc82b..6c365a2e87fe 100644
--- a/arch/arm/mach-davinci/psc.h
+++ b/arch/arm/mach-davinci/psc.h
@@ -70,70 +70,6 @@
 #define DAVINCI_LPSC_GEM		39
 #define DAVINCI_LPSC_IMCOP		40
 
-#define DM355_LPSC_TIMER3		5
-#define DM355_LPSC_SPI1			6
-#define DM355_LPSC_MMC_SD1		7
-#define DM355_LPSC_McBSP1		8
-#define DM355_LPSC_PWM3			10
-#define DM355_LPSC_SPI2			11
-#define DM355_LPSC_RTO			12
-#define DM355_LPSC_VPSS_DAC		41
-
-/* DM365 */
-#define DM365_LPSC_TIMER3	5
-#define DM365_LPSC_SPI1		6
-#define DM365_LPSC_MMC_SD1	7
-#define DM365_LPSC_McBSP1	8
-#define DM365_LPSC_PWM3		10
-#define DM365_LPSC_SPI2		11
-#define DM365_LPSC_RTO		12
-#define DM365_LPSC_TIMER4	17
-#define DM365_LPSC_SPI0		22
-#define DM365_LPSC_SPI3		38
-#define DM365_LPSC_SPI4		39
-#define DM365_LPSC_EMAC		40
-#define DM365_LPSC_VOICE_CODEC	44
-#define DM365_LPSC_DAC_CLK	46
-#define DM365_LPSC_VPSSMSTR	47
-#define DM365_LPSC_MJCP		50
-
-/*
- * LPSC Assignments
- */
-#define DM646X_LPSC_ARM		0
-#define DM646X_LPSC_C64X_CPU	1
-#define DM646X_LPSC_HDVICP0	2
-#define DM646X_LPSC_HDVICP1	3
-#define DM646X_LPSC_TPCC	4
-#define DM646X_LPSC_TPTC0	5
-#define DM646X_LPSC_TPTC1	6
-#define DM646X_LPSC_TPTC2	7
-#define DM646X_LPSC_TPTC3	8
-#define DM646X_LPSC_PCI		13
-#define DM646X_LPSC_EMAC	14
-#define DM646X_LPSC_VDCE	15
-#define DM646X_LPSC_VPSSMSTR	16
-#define DM646X_LPSC_VPSSSLV	17
-#define DM646X_LPSC_TSIF0	18
-#define DM646X_LPSC_TSIF1	19
-#define DM646X_LPSC_DDR_EMIF	20
-#define DM646X_LPSC_AEMIF	21
-#define DM646X_LPSC_McASP0	22
-#define DM646X_LPSC_McASP1	23
-#define DM646X_LPSC_CRGEN0	24
-#define DM646X_LPSC_CRGEN1	25
-#define DM646X_LPSC_UART0	26
-#define DM646X_LPSC_UART1	27
-#define DM646X_LPSC_UART2	28
-#define DM646X_LPSC_PWM0	29
-#define DM646X_LPSC_PWM1	30
-#define DM646X_LPSC_I2C		31
-#define DM646X_LPSC_SPI		32
-#define DM646X_LPSC_GPIO	33
-#define DM646X_LPSC_TIMER0	34
-#define DM646X_LPSC_TIMER1	35
-#define DM646X_LPSC_ARM_INTC	45
-
 /* PSC0 defines */
 #define DA8XX_LPSC0_TPCC		0
 #define DA8XX_LPSC0_TPTC0		1
@@ -161,9 +97,7 @@
 #define DA8XX_LPSC1_CPGMAC		5
 #define DA8XX_LPSC1_EMIF3C		6
 #define DA8XX_LPSC1_McASP0		7
-#define DA830_LPSC1_McASP1		8
 #define DA850_LPSC1_SATA		8
-#define DA830_LPSC1_McASP2		9
 #define DA850_LPSC1_VPIF		9
 #define DA8XX_LPSC1_SPI1		10
 #define DA8XX_LPSC1_I2C			11
@@ -175,7 +109,6 @@
 #define DA8XX_LPSC1_PWM			17
 #define DA850_LPSC1_MMC_SD1		18
 #define DA8XX_LPSC1_ECAP		20
-#define DA830_LPSC1_EQEP		21
 #define DA850_LPSC1_TPTC2		21
 #define DA8XX_LPSC1_SCR_P0_SS		24
 #define DA8XX_LPSC1_SCR_P1_SS		25
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
deleted file mode 100644
index 7f7814807bb5..000000000000
--- a/arch/arm/mach-davinci/serial.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * TI DaVinci serial driver
- *
- * Copyright (C) 2006 Texas Instruments.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "serial.h"
-#include "cputype.h"
-
-static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
-				    int value)
-{
-	offset <<= p->regshift;
-
-	WARN_ONCE(!p->membase, "unmapped write: uart[%d]\n", offset);
-
-	__raw_writel(value, p->membase + offset);
-}
-
-static void __init davinci_serial_reset(struct plat_serial8250_port *p)
-{
-	unsigned int pwremu = 0;
-
-	serial_write_reg(p, UART_IER, 0);  /* disable all interrupts */
-
-	/* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
-	serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
-	mdelay(10);
-
-	pwremu |= (0x3 << 13);
-	pwremu |= 0x1;
-	serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
-
-	if (cpu_is_davinci_dm646x())
-		serial_write_reg(p, UART_DM646X_SCR,
-				 UART_DM646X_SCR_TX_WATERMARK);
-}
-
-int __init davinci_serial_init(struct platform_device *serial_dev)
-{
-	int i, ret = 0;
-	struct device *dev;
-	struct plat_serial8250_port *p;
-	struct clk *clk;
-
-	/*
-	 * Make sure the serial ports are muxed on at this point.
-	 * You have to mux them off in device drivers later on if not needed.
-	 */
-	for (i = 0; serial_dev[i].dev.platform_data != NULL; i++) {
-		dev = &serial_dev[i].dev;
-		p = dev->platform_data;
-
-		ret = platform_device_register(&serial_dev[i]);
-		if (ret)
-			continue;
-
-		clk = clk_get(dev, NULL);
-		if (IS_ERR(clk)) {
-			pr_err("%s:%d: failed to get UART%d clock\n",
-			       __func__, __LINE__, i);
-			continue;
-		}
-
-		clk_prepare_enable(clk);
-
-		p->uartclk = clk_get_rate(clk);
-
-		if (!p->membase && p->mapbase) {
-			p->membase = ioremap(p->mapbase, SZ_4K);
-
-			if (p->membase)
-				p->flags &= ~UPF_IOREMAP;
-			else
-				pr_err("uart regs ioremap failed\n");
-		}
-
-		if (p->membase && p->type != PORT_AR7)
-			davinci_serial_reset(p);
-	}
-	return ret;
-}
diff --git a/arch/arm/mach-davinci/serial.h b/arch/arm/mach-davinci/serial.h
deleted file mode 100644
index c4a4ba553d45..000000000000
--- a/arch/arm/mach-davinci/serial.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * DaVinci serial device definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc.
- */
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#include <asm/memory.h>
-
-#include "hardware.h"
-
-#define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
-#define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
-#define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
-
-#define DA8XX_UART0_BASE	(IO_PHYS + 0x042000)
-#define DA8XX_UART1_BASE	(IO_PHYS + 0x10c000)
-#define DA8XX_UART2_BASE	(IO_PHYS + 0x10d000)
-
-/* DaVinci UART register offsets */
-#define UART_DAVINCI_PWREMU		0x0c
-#define UART_DM646X_SCR			0x10
-#define UART_DM646X_SCR_TX_WATERMARK	0x08
-
-#ifndef __ASSEMBLY__
-#include <linux/platform_device.h>
-
-extern int davinci_serial_init(struct platform_device *);
-#endif
-
-#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
deleted file mode 100644
index 9c8fc5031907..000000000000
--- a/arch/arm/mach-davinci/usb-da8xx.c
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * DA8xx USB
- */
-#include <linux/clk-provider.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/mfd/da8xx-cfgchip.h>
-#include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
-#include <linux/platform_data/clk-da8xx-cfgchip.h>
-#include <linux/platform_data/phy-da8xx-usb.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
-
-#include "common.h"
-#include "cputype.h"
-#include "da8xx.h"
-#include "irqs.h"
-
-#define DA8XX_USB0_BASE		0x01e00000
-#define DA8XX_USB1_BASE		0x01e25000
-
-#ifndef CONFIG_COMMON_CLK
-static struct clk *usb20_clk;
-#endif
-
-static struct da8xx_usb_phy_platform_data da8xx_usb_phy_pdata;
-
-static struct platform_device da8xx_usb_phy = {
-	.name		= "da8xx-usb-phy",
-	.id		= -1,
-	.dev		= {
-		/*
-		 * Setting init_name so that clock lookup will work in
-		 * da8xx_register_usb11_phy_clk() even if this device is not
-		 * registered yet.
-		 */
-		.init_name	= "da8xx-usb-phy",
-		.platform_data	= &da8xx_usb_phy_pdata,
-	},
-};
-
-int __init da8xx_register_usb_phy(void)
-{
-	da8xx_usb_phy_pdata.cfgchip = da8xx_get_cfgchip();
-
-	return platform_device_register(&da8xx_usb_phy);
-}
-
-static struct musb_hdrc_config musb_config = {
-	.multipoint	= true,
-	.num_eps	= 5,
-	.ram_bits	= 10,
-};
-
-static struct musb_hdrc_platform_data usb_data = {
-	/* OTG requires a Mini-AB connector */
-	.mode           = MUSB_OTG,
-	.clock		= "usb20",
-	.config		= &musb_config,
-};
-
-static struct resource da8xx_usb20_resources[] = {
-	{
-		.start		= DA8XX_USB0_BASE,
-		.end		= DA8XX_USB0_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= DAVINCI_INTC_IRQ(IRQ_DA8XX_USB_INT),
-		.flags		= IORESOURCE_IRQ,
-		.name		= "mc",
-	},
-};
-
-static u64 usb_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device da8xx_usb20_dev = {
-	.name		= "musb-da8xx",
-	.id             = -1,
-	.dev = {
-		.platform_data		= &usb_data,
-		.dma_mask		= &usb_dmamask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-	.resource	= da8xx_usb20_resources,
-	.num_resources	= ARRAY_SIZE(da8xx_usb20_resources),
-};
-
-int __init da8xx_register_usb20(unsigned int mA, unsigned int potpgt)
-{
-	usb_data.power	= mA > 510 ? 255 : mA / 2;
-	usb_data.potpgt = (potpgt + 1) / 2;
-
-	return platform_device_register(&da8xx_usb20_dev);
-}
-
-static struct resource da8xx_usb11_resources[] = {
-	[0] = {
-		.start	= DA8XX_USB1_BASE,
-		.end	= DA8XX_USB1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_IRQN),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_IRQN),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device da8xx_usb11_device = {
-	.name		= "ohci-da8xx",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &da8xx_usb11_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(da8xx_usb11_resources),
-	.resource	= da8xx_usb11_resources,
-};
-
-int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
-{
-	da8xx_usb11_device.dev.platform_data = pdata;
-	return platform_device_register(&da8xx_usb11_device);
-}
-
-static struct platform_device da8xx_usb_phy_clks_device = {
-	.name		= "da830-usb-phy-clks",
-	.id		= -1,
-};
-
-int __init da8xx_register_usb_phy_clocks(void)
-{
-	struct da8xx_cfgchip_clk_platform_data pdata;
-
-	pdata.cfgchip = da8xx_get_cfgchip();
-	da8xx_usb_phy_clks_device.dev.platform_data = &pdata;
-
-	return platform_device_register(&da8xx_usb_phy_clks_device);
-}
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
deleted file mode 100644
index a9e5c6e91e5d..000000000000
--- a/arch/arm/mach-davinci/usb.c
+++ /dev/null
@@ -1,87 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * USB
- */
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/usb/musb.h>
-
-#include "common.h"
-#include "cputype.h"
-#include "irqs.h"
-
-#define DAVINCI_USB_OTG_BASE	0x01c64000
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-static struct musb_hdrc_config musb_config = {
-	.multipoint	= true,
-
-	.num_eps	= 5,
-	.ram_bits	= 10,
-};
-
-static struct musb_hdrc_platform_data usb_data = {
-	/* OTG requires a Mini-AB connector */
-	.mode           = MUSB_OTG,
-	.clock		= "usb",
-	.config		= &musb_config,
-};
-
-static struct resource usb_resources[] = {
-	{
-		/* physical address */
-		.start          = DAVINCI_USB_OTG_BASE,
-		.end            = DAVINCI_USB_OTG_BASE + 0x5ff,
-		.flags          = IORESOURCE_MEM,
-	},
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_USBINT),
-		.flags          = IORESOURCE_IRQ,
-		.name		= "mc"
-	},
-	{
-		/* placeholder for the dedicated CPPI IRQ */
-		.flags          = IORESOURCE_IRQ,
-		.name		= "dma"
-	},
-};
-
-static u64 usb_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device usb_dev = {
-	.name           = "musb-davinci",
-	.id             = -1,
-	.dev = {
-		.platform_data		= &usb_data,
-		.dma_mask		= &usb_dmamask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-	.resource       = usb_resources,
-	.num_resources  = ARRAY_SIZE(usb_resources),
-};
-
-void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
-{
-	usb_data.power = mA > 510 ? 255 : mA / 2;
-	usb_data.potpgt = (potpgt_ms + 1) / 2;
-
-	if (cpu_is_davinci_dm646x()) {
-		/* Override the defaults as DM6467 uses different IRQs. */
-		usb_dev.resource[1].start = DAVINCI_INTC_IRQ(IRQ_DM646X_USBINT);
-		usb_dev.resource[2].start = DAVINCI_INTC_IRQ(
-							IRQ_DM646X_USBDMAINT);
-	} else	/* other devices don't have dedicated CPPI IRQ */
-		usb_dev.num_resources = 2;
-
-	platform_device_register(&usb_dev);
-}
-
-#else
-
-void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
-{
-}
-
-#endif  /* CONFIG_USB_MUSB_HDRC */
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index 2252f465cafd..996888ffcfe7 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -18,14 +18,6 @@ if ARCH_DOVE
 config DOVE_LEGACY
 	bool
 
-config MACH_DOVE_DB
-	bool "Marvell DB-MV88AP510 Development Board"
-	select DOVE_LEGACY
-	select I2C_BOARDINFO if I2C
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell DB-MV88AP510 Development Board.
-
 config MACH_CM_A510
 	bool "CompuLab CM-A510 Board"
 	select DOVE_LEGACY
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index e83f6492834d..0d31390be069 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -1,8 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+ccflags-y := -I$(srctree)/arch/arm/plat-orion/include
 
 obj-y				+= common.o
 obj-$(CONFIG_DOVE_LEGACY)	+= irq.o mpp.o
 obj-$(CONFIG_PCI)		+= pcie.o
-obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
 obj-$(CONFIG_MACH_CM_A510)	+= cm-a510.o
diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot
deleted file mode 100644
index e4dd1d26038f..000000000000
--- a/arch/arm/mach-dove/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index cd4ae7e4768d..35e978514591 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -9,8 +9,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
 #include <linux/platform_data/dma-mv_xor.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <linux/platform_device.h>
@@ -84,7 +82,7 @@ static void __init dove_clk_init(void)
 {
 	struct clk *usb0, *usb1, *sata, *pex0, *pex1, *sdio0, *sdio1;
 	struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma;
-	struct clk *xor0, *xor1, *ge, *gephy;
+	struct clk *xor0, *xor1, *ge;
 
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, dove_tclk);
 
@@ -104,7 +102,7 @@ static void __init dove_clk_init(void)
 	pdma = dove_register_gate("pdma", "tclk", CLOCK_GATING_BIT_PDMA);
 	xor0 = dove_register_gate("xor0", "tclk", CLOCK_GATING_BIT_XOR0);
 	xor1 = dove_register_gate("xor1", "tclk", CLOCK_GATING_BIT_XOR1);
-	gephy = dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY);
+	dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY);
 	ge = dove_register_gate("ge", "gephy", CLOCK_GATING_BIT_GBE);
 
 	orion_clkdev_add(NULL, "orion_spi.0", tclk);
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
deleted file mode 100644
index d5bf54040577..000000000000
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ /dev/null
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-dove/dove-db-setup.c
- *
- * Marvell DB-MV88AP510-BP Development Board Setup
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/timer.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/pci.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "dove.h"
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dove_db_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR_DEFAULT,
-};
-
-static struct mv_sata_platform_data dove_db_sata_data = {
-	.n_ports        = 1,
-};
-
-/*****************************************************************************
- * SPI Devices:
- * 	SPI0: 4M Flash ST-M25P32-VMF6P
- ****************************************************************************/
-static const struct flash_platform_data dove_db_spi_flash_data = {
-	.type		= "m25p64",
-};
-
-static struct spi_board_info __initdata dove_db_spi_flash_info[] = {
-	{
-		.modalias       = "m25p80",
-		.platform_data  = &dove_db_spi_flash_data,
-		.irq            = -1,
-		.max_speed_hz   = 20000000,
-		.bus_num        = 0,
-		.chip_select    = 0,
-	},
-};
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-static int __init dove_db_pci_init(void)
-{
-	if (machine_is_dove_db())
-		dove_pcie_init(1, 1);
-
-	return 0;
-}
-
-subsys_initcall(dove_db_pci_init);
-
-/*****************************************************************************
- * Board Init
- ****************************************************************************/
-static void __init dove_db_init(void)
-{
-	/*
-	 * Basic Dove setup. Needs to be called early.
-	 */
-	dove_init();
-
-	dove_ge00_init(&dove_db_ge00_data);
-	dove_ehci0_init();
-	dove_ehci1_init();
-	dove_sata_init(&dove_db_sata_data);
-	dove_sdio0_init();
-	dove_sdio1_init();
-	dove_spi0_init();
-	dove_spi1_init();
-	dove_uart0_init();
-	dove_uart1_init();
-	dove_i2c_init();
-	spi_register_board_info(dove_db_spi_flash_info,
-				ARRAY_SIZE(dove_db_spi_flash_info));
-}
-
-MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
-	.atag_offset	= 0x100,
-	.nr_irqs	= DOVE_NR_IRQS,
-	.init_machine	= dove_db_init,
-	.map_io		= dove_map_io,
-	.init_early	= dove_init_early,
-	.init_irq	= dove_init_irq,
-	.init_time	= dove_timer_init,
-	.restart	= dove_restart,
-MACHINE_END
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
index 754ca381f600..3044b7e03890 100644
--- a/arch/arm/mach-dove/pcie.c
+++ b/arch/arm/mach-dove/pcie.c
@@ -142,14 +142,14 @@ static struct pci_ops pcie_ops = {
 static void rc_pci_fixup(struct pci_dev *dev)
 {
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
-		int i;
+		struct resource *r;
 
 		dev->class &= 0xff;
 		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
-		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
+		pci_dev_for_each_resource(dev, r) {
+			r->start = 0;
+			r->end   = 0;
+			r->flags = 0;
 		}
 	}
 }
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 2c40996a444b..812b71dcf60e 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -3,34 +3,27 @@ menuconfig ARCH_EP93XX
 	bool "EP93xx-based"
 	depends on ATAGS
 	depends on ARCH_MULTI_V4T
+	# CONFIG_ARCH_MULTI_V7 is not set
 	depends on CPU_LITTLE_ENDIAN
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_SPARSEMEM_ENABLE
 	select ARM_AMBA
 	select ARM_VIC
+	select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
+	select ARM_ATAG_DTB_COMPAT # we need this to update dt memory node
+	select COMMON_CLK_EP93XX
+	select EP93XX_TIMER
 	select CLKSRC_MMIO
 	select CPU_ARM920T
 	select GPIOLIB
+	select PINCTRL
+	select PINCTRL_EP93XX
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
 if ARCH_EP93XX
 
-menu "Cirrus EP93xx Implementation Options"
-
-config EP93XX_SOC_COMMON
-	bool
-	default y
-	select SOC_BUS
-	select LEDS_GPIO_REGISTER
-
-comment "EP93xx Platforms"
-
-config MACH_ADSSPHERE
-	bool "Support ADS Sphere"
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the ADS
-	  Sphere board.
+# menu "EP93xx Platforms"
 
 config MACH_BK3
 	bool "Support Liebherr BK3.1"
@@ -98,62 +91,6 @@ config MACH_EDB9315A
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9315A Evaluation Board.
 
-config MACH_GESBC9312
-	bool "Support Glomation GESBC-9312-sx"
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the Glomation
-	  GESBC-9312-sx board.
-
-config MACH_MICRO9
-	bool
-
-config MACH_MICRO9H
-	bool "Support Contec Micro9-High"
-	select MACH_MICRO9
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-High board.
-
-config MACH_MICRO9M
-	bool "Support Contec Micro9-Mid"
-	select MACH_MICRO9
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-Mid board.
-
-config MACH_MICRO9L
-	bool "Support Contec Micro9-Lite"
-	select MACH_MICRO9
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-Lite board.
-
-config MACH_MICRO9S
-	bool "Support Contec Micro9-Slim"
-	select MACH_MICRO9
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-Slim board.
-
-config MACH_SIM_ONE
-        bool "Support Simplemachines Sim.One board"
-	depends on UNUSED_BOARD_FILES
-        help
-          Say 'Y' here if you want your kernel to support the
-          Simplemachines Sim.One board.
-
-config MACH_SNAPPER_CL15
-	bool "Support Bluewater Systems Snapper CL15 Module"
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the Bluewater
-	  Systems Snapper CL15 Module.
-
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
 	help
@@ -166,6 +103,6 @@ config MACH_VISION_EP9307
 	  Say 'Y' here if you want your kernel to support the
 	  Vision Engraving Systems EP9307 SoM.
 
-endmenu
+# endmenu
 
 endif
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
deleted file mode 100644
index cfad517fac46..000000000000
--- a/arch/arm/mach-ep93xx/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-obj-y			:= core.o clock.o timer-ep93xx.o
-
-obj-$(CONFIG_EP93XX_DMA)	+= dma.o
-
-obj-$(CONFIG_MACH_ADSSPHERE)	+= adssphere.o
-obj-$(CONFIG_MACH_EDB93XX)	+= edb93xx.o
-obj-$(CONFIG_MACH_GESBC9312)	+= gesbc9312.o
-obj-$(CONFIG_MACH_MICRO9)	+= micro9.o
-obj-$(CONFIG_MACH_SIM_ONE)	+= simone.o
-obj-$(CONFIG_MACH_SNAPPER_CL15)	+= snappercl15.o
-obj-$(CONFIG_MACH_TS72XX)	+= ts72xx.o
-obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
deleted file mode 100644
index 4c0a039a5027..000000000000
--- a/arch/arm/mach-ep93xx/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Empty file waiting for deletion once Makefile.boot isn't needed any more.
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
deleted file mode 100644
index 0c48d3c5b8e7..000000000000
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/adssphere.c
- * ADS Sphere support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/sizes.h>
-
-#include "hardware.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static struct ep93xx_eth_data __initdata adssphere_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init adssphere_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
-	ep93xx_register_eth(&adssphere_eth_data, 1);
-}
-
-MACHINE_START(ADSSPHERE, "ADS Sphere board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= adssphere_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
deleted file mode 100644
index 85a496ddc619..000000000000
--- a/arch/arm/mach-ep93xx/clock.c
+++ /dev/null
@@ -1,733 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/clock.c
- * Clock control for Cirrus EP93xx chips.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
-#include <linux/soc/cirrus/ep93xx.h>
-
-#include "hardware.h"
-
-#include <asm/div64.h>
-
-#include "soc.h"
-
-static DEFINE_SPINLOCK(clk_lock);
-
-static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
-static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
-static char pclk_divisors[] = { 1, 2, 4, 8 };
-
-static char adc_divisors[] = { 16, 4 };
-static char sclk_divisors[] = { 2, 4 };
-static char lrclk_divisors[] = { 32, 64, 128 };
-
-static const char * const mux_parents[] = {
-	"xtali",
-	"pll1",
-	"pll2"
-};
-
-/*
- * PLL rate = 14.7456 MHz * (X1FBD + 1) * (X2FBD + 1) / (X2IPD + 1) / 2^PS
- */
-static unsigned long calc_pll_rate(unsigned long long rate, u32 config_word)
-{
-	int i;
-
-	rate *= ((config_word >> 11) & 0x1f) + 1;		/* X1FBD */
-	rate *= ((config_word >> 5) & 0x3f) + 1;		/* X2FBD */
-	do_div(rate, (config_word & 0x1f) + 1);			/* X2IPD */
-	for (i = 0; i < ((config_word >> 16) & 3); i++)		/* PS */
-		rate >>= 1;
-
-	return (unsigned long)rate;
-}
-
-struct clk_psc {
-	struct clk_hw hw;
-	void __iomem *reg;
-	u8 bit_idx;
-	u32 mask;
-	u8 shift;
-	u8 width;
-	char *div;
-	u8 num_div;
-	spinlock_t *lock;
-};
-
-#define to_clk_psc(_hw) container_of(_hw, struct clk_psc, hw)
-
-static int ep93xx_clk_is_enabled(struct clk_hw *hw)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	u32 val = readl(psc->reg);
-
-	return (val & BIT(psc->bit_idx)) ? 1 : 0;
-}
-
-static int ep93xx_clk_enable(struct clk_hw *hw)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	unsigned long flags = 0;
-	u32 val;
-
-	if (psc->lock)
-		spin_lock_irqsave(psc->lock, flags);
-
-	val = __raw_readl(psc->reg);
-	val |= BIT(psc->bit_idx);
-
-	ep93xx_syscon_swlocked_write(val, psc->reg);
-
-	if (psc->lock)
-		spin_unlock_irqrestore(psc->lock, flags);
-
-	return 0;
-}
-
-static void ep93xx_clk_disable(struct clk_hw *hw)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	unsigned long flags = 0;
-	u32 val;
-
-	if (psc->lock)
-		spin_lock_irqsave(psc->lock, flags);
-
-	val = __raw_readl(psc->reg);
-	val &= ~BIT(psc->bit_idx);
-
-	ep93xx_syscon_swlocked_write(val, psc->reg);
-
-	if (psc->lock)
-		spin_unlock_irqrestore(psc->lock, flags);
-}
-
-static const struct clk_ops clk_ep93xx_gate_ops = {
-	.enable = ep93xx_clk_enable,
-	.disable = ep93xx_clk_disable,
-	.is_enabled = ep93xx_clk_is_enabled,
-};
-
-static struct clk_hw *ep93xx_clk_register_gate(const char *name,
-				    const char *parent_name,
-				    void __iomem *reg,
-				    u8 bit_idx)
-{
-	struct clk_init_data init;
-	struct clk_psc *psc;
-	struct clk *clk;
-
-	psc = kzalloc(sizeof(*psc), GFP_KERNEL);
-	if (!psc)
-		return ERR_PTR(-ENOMEM);
-
-	init.name = name;
-	init.ops = &clk_ep93xx_gate_ops;
-	init.flags = CLK_SET_RATE_PARENT;
-	init.parent_names = (parent_name ? &parent_name : NULL);
-	init.num_parents = (parent_name ? 1 : 0);
-
-	psc->reg = reg;
-	psc->bit_idx = bit_idx;
-	psc->hw.init = &init;
-	psc->lock = &clk_lock;
-
-	clk = clk_register(NULL, &psc->hw);
-	if (IS_ERR(clk)) {
-		kfree(psc);
-		return ERR_CAST(clk);
-	}
-
-	return &psc->hw;
-}
-
-static u8 ep93xx_mux_get_parent(struct clk_hw *hw)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	u32 val = __raw_readl(psc->reg);
-
-	if (!(val & EP93XX_SYSCON_CLKDIV_ESEL))
-		return 0;
-
-	if (!(val & EP93XX_SYSCON_CLKDIV_PSEL))
-		return 1;
-
-	return 2;
-}
-
-static int ep93xx_mux_set_parent_lock(struct clk_hw *hw, u8 index)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	unsigned long flags = 0;
-	u32 val;
-
-	if (index >= ARRAY_SIZE(mux_parents))
-		return -EINVAL;
-
-	if (psc->lock)
-		spin_lock_irqsave(psc->lock, flags);
-
-	val = __raw_readl(psc->reg);
-	val &= ~(EP93XX_SYSCON_CLKDIV_ESEL | EP93XX_SYSCON_CLKDIV_PSEL);
-
-
-	if (index != 0) {
-		val |= EP93XX_SYSCON_CLKDIV_ESEL;
-		val |= (index - 1) ? EP93XX_SYSCON_CLKDIV_PSEL : 0;
-	}
-
-	ep93xx_syscon_swlocked_write(val, psc->reg);
-
-	if (psc->lock)
-		spin_unlock_irqrestore(psc->lock, flags);
-
-	return 0;
-}
-
-static bool is_best(unsigned long rate, unsigned long now,
-		     unsigned long best)
-{
-	return abs(rate - now) < abs(rate - best);
-}
-
-static int ep93xx_mux_determine_rate(struct clk_hw *hw,
-				struct clk_rate_request *req)
-{
-	unsigned long rate = req->rate;
-	struct clk *best_parent = NULL;
-	unsigned long __parent_rate;
-	unsigned long best_rate = 0, actual_rate, mclk_rate;
-	unsigned long best_parent_rate;
-	int __div = 0, __pdiv = 0;
-	int i;
-
-	/*
-	 * Try the two pll's and the external clock
-	 * Because the valid predividers are 2, 2.5 and 3, we multiply
-	 * all the clocks by 2 to avoid floating point math.
-	 *
-	 * This is based on the algorithm in the ep93xx raster guide:
-	 * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf
-	 *
-	 */
-	for (i = 0; i < ARRAY_SIZE(mux_parents); i++) {
-		struct clk *parent = clk_get_sys(mux_parents[i], NULL);
-
-		__parent_rate = clk_get_rate(parent);
-		mclk_rate = __parent_rate * 2;
-
-		/* Try each predivider value */
-		for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
-			__div = mclk_rate / (rate * __pdiv);
-			if (__div < 2 || __div > 127)
-				continue;
-
-			actual_rate = mclk_rate / (__pdiv * __div);
-			if (is_best(rate, actual_rate, best_rate)) {
-				best_rate = actual_rate;
-				best_parent_rate = __parent_rate;
-				best_parent = parent;
-			}
-		}
-	}
-
-	if (!best_parent)
-		return -EINVAL;
-
-	req->best_parent_rate = best_parent_rate;
-	req->best_parent_hw = __clk_get_hw(best_parent);
-	req->rate = best_rate;
-
-	return 0;
-}
-
-static unsigned long ep93xx_ddiv_recalc_rate(struct clk_hw *hw,
-						unsigned long parent_rate)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	unsigned long rate = 0;
-	u32 val = __raw_readl(psc->reg);
-	int __pdiv = ((val >> EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) & 0x03);
-	int __div = val & 0x7f;
-
-	if (__div > 0)
-		rate = (parent_rate * 2) / ((__pdiv + 3) * __div);
-
-	return rate;
-}
-
-static int ep93xx_ddiv_set_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long parent_rate)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	int pdiv = 0, div = 0;
-	unsigned long best_rate = 0, actual_rate, mclk_rate;
-	int __div = 0, __pdiv = 0;
-	u32 val;
-
-	mclk_rate = parent_rate * 2;
-
-	for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
-		__div = mclk_rate / (rate * __pdiv);
-		if (__div < 2 || __div > 127)
-			continue;
-
-		actual_rate = mclk_rate / (__pdiv * __div);
-		if (is_best(rate, actual_rate, best_rate)) {
-			pdiv = __pdiv - 3;
-			div = __div;
-			best_rate = actual_rate;
-		}
-	}
-
-	if (!best_rate)
-		return -EINVAL;
-
-	val = __raw_readl(psc->reg);
-
-	/* Clear old dividers */
-	val &= ~0x37f;
-
-	/* Set the new pdiv and div bits for the new clock rate */
-	val |= (pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div;
-	ep93xx_syscon_swlocked_write(val, psc->reg);
-
-	return 0;
-}
-
-static const struct clk_ops clk_ddiv_ops = {
-	.enable = ep93xx_clk_enable,
-	.disable = ep93xx_clk_disable,
-	.is_enabled = ep93xx_clk_is_enabled,
-	.get_parent = ep93xx_mux_get_parent,
-	.set_parent = ep93xx_mux_set_parent_lock,
-	.determine_rate = ep93xx_mux_determine_rate,
-	.recalc_rate = ep93xx_ddiv_recalc_rate,
-	.set_rate = ep93xx_ddiv_set_rate,
-};
-
-static struct clk_hw *clk_hw_register_ddiv(const char *name,
-					  void __iomem *reg,
-					  u8 bit_idx)
-{
-	struct clk_init_data init;
-	struct clk_psc *psc;
-	struct clk *clk;
-
-	psc = kzalloc(sizeof(*psc), GFP_KERNEL);
-	if (!psc)
-		return ERR_PTR(-ENOMEM);
-
-	init.name = name;
-	init.ops = &clk_ddiv_ops;
-	init.flags = 0;
-	init.parent_names = mux_parents;
-	init.num_parents = ARRAY_SIZE(mux_parents);
-
-	psc->reg = reg;
-	psc->bit_idx = bit_idx;
-	psc->lock = &clk_lock;
-	psc->hw.init = &init;
-
-	clk = clk_register(NULL, &psc->hw);
-	if (IS_ERR(clk)) {
-		kfree(psc);
-		return ERR_CAST(clk);
-	}
-	return &psc->hw;
-}
-
-static unsigned long ep93xx_div_recalc_rate(struct clk_hw *hw,
-					    unsigned long parent_rate)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	u32 val = __raw_readl(psc->reg);
-	u8 index = (val & psc->mask) >> psc->shift;
-
-	if (index > psc->num_div)
-		return 0;
-
-	return DIV_ROUND_UP_ULL(parent_rate, psc->div[index]);
-}
-
-static long ep93xx_div_round_rate(struct clk_hw *hw, unsigned long rate,
-				   unsigned long *parent_rate)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	unsigned long best = 0, now, maxdiv;
-	int i;
-
-	maxdiv = psc->div[psc->num_div - 1];
-
-	for (i = 0; i < psc->num_div; i++) {
-		if ((rate * psc->div[i]) == *parent_rate)
-			return DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]);
-
-		now = DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]);
-
-		if (is_best(rate, now, best))
-			best = now;
-	}
-
-	if (!best)
-		best = DIV_ROUND_UP_ULL(*parent_rate, maxdiv);
-
-	return best;
-}
-
-static int ep93xx_div_set_rate(struct clk_hw *hw, unsigned long rate,
-			       unsigned long parent_rate)
-{
-	struct clk_psc *psc = to_clk_psc(hw);
-	u32 val = __raw_readl(psc->reg) & ~psc->mask;
-	int i;
-
-	for (i = 0; i < psc->num_div; i++)
-		if (rate == parent_rate / psc->div[i]) {
-			val |= i << psc->shift;
-			break;
-		}
-
-	if (i == psc->num_div)
-		return -EINVAL;
-
-	ep93xx_syscon_swlocked_write(val, psc->reg);
-
-	return 0;
-}
-
-static const struct clk_ops ep93xx_div_ops = {
-	.enable = ep93xx_clk_enable,
-	.disable = ep93xx_clk_disable,
-	.is_enabled = ep93xx_clk_is_enabled,
-	.recalc_rate = ep93xx_div_recalc_rate,
-	.round_rate = ep93xx_div_round_rate,
-	.set_rate = ep93xx_div_set_rate,
-};
-
-static struct clk_hw *clk_hw_register_div(const char *name,
-					  const char *parent_name,
-					  void __iomem *reg,
-					  u8 enable_bit,
-					  u8 shift,
-					  u8 width,
-					  char *clk_divisors,
-					  u8 num_div)
-{
-	struct clk_init_data init;
-	struct clk_psc *psc;
-	struct clk *clk;
-
-	psc = kzalloc(sizeof(*psc), GFP_KERNEL);
-	if (!psc)
-		return ERR_PTR(-ENOMEM);
-
-	init.name = name;
-	init.ops = &ep93xx_div_ops;
-	init.flags = 0;
-	init.parent_names = (parent_name ? &parent_name : NULL);
-	init.num_parents = 1;
-
-	psc->reg = reg;
-	psc->bit_idx = enable_bit;
-	psc->mask = GENMASK(shift + width - 1, shift);
-	psc->shift = shift;
-	psc->div = clk_divisors;
-	psc->num_div = num_div;
-	psc->lock = &clk_lock;
-	psc->hw.init = &init;
-
-	clk = clk_register(NULL, &psc->hw);
-	if (IS_ERR(clk)) {
-		kfree(psc);
-		return ERR_CAST(clk);
-	}
-	return &psc->hw;
-}
-
-struct ep93xx_gate {
-	unsigned int bit;
-	const char *dev_id;
-	const char *con_id;
-};
-
-static struct ep93xx_gate ep93xx_uarts[] = {
-	{EP93XX_SYSCON_DEVCFG_U1EN, "apb:uart1", NULL},
-	{EP93XX_SYSCON_DEVCFG_U2EN, "apb:uart2", NULL},
-	{EP93XX_SYSCON_DEVCFG_U3EN, "apb:uart3", NULL},
-};
-
-static void __init ep93xx_uart_clock_init(void)
-{
-	unsigned int i;
-	struct clk_hw *hw;
-	u32 value;
-	unsigned int clk_uart_div;
-
-	value = __raw_readl(EP93XX_SYSCON_PWRCNT);
-	if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
-		clk_uart_div = 1;
-	else
-		clk_uart_div = 2;
-
-	hw = clk_hw_register_fixed_factor(NULL, "uart", "xtali", 0, 1, clk_uart_div);
-
-	/* parenting uart gate clocks to uart clock */
-	for (i = 0; i < ARRAY_SIZE(ep93xx_uarts); i++) {
-		hw = ep93xx_clk_register_gate(ep93xx_uarts[i].dev_id,
-					"uart",
-					EP93XX_SYSCON_DEVCFG,
-					ep93xx_uarts[i].bit);
-
-		clk_hw_register_clkdev(hw, NULL, ep93xx_uarts[i].dev_id);
-	}
-}
-
-static struct ep93xx_gate ep93xx_dmas[] = {
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P0, NULL, "m2p0"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P1, NULL, "m2p1"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P2, NULL, "m2p2"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P3, NULL, "m2p3"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P4, NULL, "m2p4"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P5, NULL, "m2p5"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P6, NULL, "m2p6"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P7, NULL, "m2p7"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P8, NULL, "m2p8"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2P9, NULL, "m2p9"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2M0, NULL, "m2m0"},
-	{EP93XX_SYSCON_PWRCNT_DMA_M2M1, NULL, "m2m1"},
-};
-
-static void __init ep93xx_dma_clock_init(void)
-{
-	unsigned int i;
-	struct clk_hw *hw;
-	int ret;
-
-	for (i = 0; i < ARRAY_SIZE(ep93xx_dmas); i++) {
-		hw = clk_hw_register_gate(NULL, ep93xx_dmas[i].con_id,
-					"hclk", 0,
-					EP93XX_SYSCON_PWRCNT,
-					ep93xx_dmas[i].bit,
-					0,
-					&clk_lock);
-
-		ret = clk_hw_register_clkdev(hw, ep93xx_dmas[i].con_id, NULL);
-		if (ret)
-			pr_err("%s: failed to register lookup %s\n",
-			       __func__, ep93xx_dmas[i].con_id);
-	}
-}
-
-static int __init ep93xx_clock_init(void)
-{
-	u32 value;
-	struct clk_hw *hw;
-	unsigned long clk_pll1_rate;
-	unsigned long clk_f_rate;
-	unsigned long clk_h_rate;
-	unsigned long clk_p_rate;
-	unsigned long clk_pll2_rate;
-	unsigned int clk_f_div;
-	unsigned int clk_h_div;
-	unsigned int clk_p_div;
-	unsigned int clk_usb_div;
-	unsigned long clk_spi_div;
-
-	hw = clk_hw_register_fixed_rate(NULL, "xtali", NULL, 0, EP93XX_EXT_CLK_RATE);
-	clk_hw_register_clkdev(hw, NULL, "xtali");
-
-	/* Determine the bootloader configured pll1 rate */
-	value = __raw_readl(EP93XX_SYSCON_CLKSET1);
-	if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1))
-		clk_pll1_rate = EP93XX_EXT_CLK_RATE;
-	else
-		clk_pll1_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value);
-
-	hw = clk_hw_register_fixed_rate(NULL, "pll1", "xtali", 0, clk_pll1_rate);
-	clk_hw_register_clkdev(hw, NULL, "pll1");
-
-	/* Initialize the pll1 derived clocks */
-	clk_f_div = fclk_divisors[(value >> 25) & 0x7];
-	clk_h_div = hclk_divisors[(value >> 20) & 0x7];
-	clk_p_div = pclk_divisors[(value >> 18) & 0x3];
-
-	hw = clk_hw_register_fixed_factor(NULL, "fclk", "pll1", 0, 1, clk_f_div);
-	clk_f_rate = clk_get_rate(hw->clk);
-	hw = clk_hw_register_fixed_factor(NULL, "hclk", "pll1", 0, 1, clk_h_div);
-	clk_h_rate = clk_get_rate(hw->clk);
-	hw = clk_hw_register_fixed_factor(NULL, "pclk", "hclk", 0, 1, clk_p_div);
-	clk_p_rate = clk_get_rate(hw->clk);
-
-	clk_hw_register_clkdev(hw, "apb_pclk", NULL);
-
-	ep93xx_dma_clock_init();
-
-	/* Determine the bootloader configured pll2 rate */
-	value = __raw_readl(EP93XX_SYSCON_CLKSET2);
-	if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2))
-		clk_pll2_rate = EP93XX_EXT_CLK_RATE;
-	else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN)
-		clk_pll2_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value);
-	else
-		clk_pll2_rate = 0;
-
-	hw = clk_hw_register_fixed_rate(NULL, "pll2", "xtali", 0, clk_pll2_rate);
-	clk_hw_register_clkdev(hw, NULL, "pll2");
-
-	/* Initialize the pll2 derived clocks */
-	/*
-	 * These four bits set the divide ratio between the PLL2
-	 * output and the USB clock.
-	 * 0000 - Divide by 1
-	 * 0001 - Divide by 2
-	 * 0010 - Divide by 3
-	 * 0011 - Divide by 4
-	 * 0100 - Divide by 5
-	 * 0101 - Divide by 6
-	 * 0110 - Divide by 7
-	 * 0111 - Divide by 8
-	 * 1000 - Divide by 9
-	 * 1001 - Divide by 10
-	 * 1010 - Divide by 11
-	 * 1011 - Divide by 12
-	 * 1100 - Divide by 13
-	 * 1101 - Divide by 14
-	 * 1110 - Divide by 15
-	 * 1111 - Divide by 1
-	 * On power-on-reset these bits are reset to 0000b.
-	 */
-	clk_usb_div = (((value >> 28) & 0xf) + 1);
-	hw = clk_hw_register_fixed_factor(NULL, "usb_clk", "pll2", 0, 1, clk_usb_div);
-	hw = clk_hw_register_gate(NULL, "ohci-platform",
-				"usb_clk", 0,
-				EP93XX_SYSCON_PWRCNT,
-				EP93XX_SYSCON_PWRCNT_USH_EN,
-				0,
-				&clk_lock);
-	clk_hw_register_clkdev(hw, NULL, "ohci-platform");
-
-	/*
-	 * EP93xx SSP clock rate was doubled in version E2. For more information
-	 * see:
-	 *     http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
-	 */
-	clk_spi_div = 1;
-	if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2)
-		clk_spi_div = 2;
-	hw = clk_hw_register_fixed_factor(NULL, "ep93xx-spi.0", "xtali", 0, 1, clk_spi_div);
-	clk_hw_register_clkdev(hw, NULL, "ep93xx-spi.0");
-
-	/* pwm clock */
-	hw = clk_hw_register_fixed_factor(NULL, "pwm_clk", "xtali", 0, 1, 1);
-	clk_hw_register_clkdev(hw, "pwm_clk", NULL);
-
-	pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
-		clk_pll1_rate / 1000000, clk_pll2_rate / 1000000);
-	pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
-		clk_f_rate / 1000000, clk_h_rate / 1000000,
-		clk_p_rate / 1000000);
-
-	ep93xx_uart_clock_init();
-
-	/* touchscreen/adc clock */
-	hw = clk_hw_register_div("ep93xx-adc",
-				"xtali",
-				EP93XX_SYSCON_KEYTCHCLKDIV,
-				EP93XX_SYSCON_KEYTCHCLKDIV_TSEN,
-				EP93XX_SYSCON_KEYTCHCLKDIV_ADIV,
-				1,
-				adc_divisors,
-				ARRAY_SIZE(adc_divisors));
-
-	clk_hw_register_clkdev(hw, NULL, "ep93xx-adc");
-
-	/* keypad clock */
-	hw = clk_hw_register_div("ep93xx-keypad",
-				"xtali",
-				EP93XX_SYSCON_KEYTCHCLKDIV,
-				EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
-				EP93XX_SYSCON_KEYTCHCLKDIV_KDIV,
-				1,
-				adc_divisors,
-				ARRAY_SIZE(adc_divisors));
-
-	clk_hw_register_clkdev(hw, NULL, "ep93xx-keypad");
-
-	/* On reset PDIV and VDIV is set to zero, while PDIV zero
-	 * means clock disable, VDIV shouldn't be zero.
-	 * So i set both dividers to minimum.
-	 */
-	/* ENA - Enable CLK divider. */
-	/* PDIV - 00 - Disable clock */
-	/* VDIV - at least 2 */
-	/* Check and enable video clk registers */
-	value = __raw_readl(EP93XX_SYSCON_VIDCLKDIV);
-	value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2;
-	ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_VIDCLKDIV);
-
-	/* check and enable i2s clk registers */
-	value = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
-	value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2;
-	ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_I2SCLKDIV);
-
-	/* video clk */
-	hw = clk_hw_register_ddiv("ep93xx-fb",
-				EP93XX_SYSCON_VIDCLKDIV,
-				EP93XX_SYSCON_CLKDIV_ENABLE);
-
-	clk_hw_register_clkdev(hw, NULL, "ep93xx-fb");
-
-	/* i2s clk */
-	hw = clk_hw_register_ddiv("mclk",
-				EP93XX_SYSCON_I2SCLKDIV,
-				EP93XX_SYSCON_CLKDIV_ENABLE);
-
-	clk_hw_register_clkdev(hw, "mclk", "ep93xx-i2s");
-
-	/* i2s sclk */
-#define EP93XX_I2SCLKDIV_SDIV_SHIFT	16
-#define EP93XX_I2SCLKDIV_SDIV_WIDTH	1
-	hw = clk_hw_register_div("sclk",
-				"mclk",
-				EP93XX_SYSCON_I2SCLKDIV,
-				EP93XX_SYSCON_I2SCLKDIV_SENA,
-				EP93XX_I2SCLKDIV_SDIV_SHIFT,
-				EP93XX_I2SCLKDIV_SDIV_WIDTH,
-				sclk_divisors,
-				ARRAY_SIZE(sclk_divisors));
-
-	clk_hw_register_clkdev(hw, "sclk", "ep93xx-i2s");
-
-	/* i2s lrclk */
-#define EP93XX_I2SCLKDIV_LRDIV32_SHIFT	17
-#define EP93XX_I2SCLKDIV_LRDIV32_WIDTH	3
-	hw = clk_hw_register_div("lrclk",
-				"sclk",
-				EP93XX_SYSCON_I2SCLKDIV,
-				EP93XX_SYSCON_I2SCLKDIV_SENA,
-				EP93XX_I2SCLKDIV_LRDIV32_SHIFT,
-				EP93XX_I2SCLKDIV_LRDIV32_WIDTH,
-				lrclk_divisors,
-				ARRAY_SIZE(lrclk_divisors));
-
-	clk_hw_register_clkdev(hw, "lrclk", "ep93xx-i2s");
-
-	return 0;
-}
-postcore_initcall(ep93xx_clock_init);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
deleted file mode 100644
index 2d58e273c96d..000000000000
--- a/arch/arm/mach-ep93xx/core.c
+++ /dev/null
@@ -1,1007 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/core.c
- * Core routines for Cirrus EP93xx chips.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- *
- * Thanks go to Michael Burian and Ray Lehtiniemi for their key
- * role in the ep93xx linux community.
- */
-
-#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/sys_soc.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/termios.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/serial.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/gpio/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/export.h>
-#include <linux/irqchip/arm-vic.h>
-#include <linux/reboot.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <linux/random.h>
-
-#include "hardware.h"
-#include <linux/platform_data/video-ep93xx.h>
-#include <linux/platform_data/keypad-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include <linux/soc/cirrus/ep93xx.h>
-
-#include "gpio-ep93xx.h"
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "soc.h"
-#include "irqs.h"
-
-/*************************************************************************
- * Static I/O mappings that are needed for all EP93xx platforms
- *************************************************************************/
-static struct map_desc ep93xx_io_desc[] __initdata = {
-	{
-		.virtual	= EP93XX_AHB_VIRT_BASE,
-		.pfn		= __phys_to_pfn(EP93XX_AHB_PHYS_BASE),
-		.length		= EP93XX_AHB_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= EP93XX_APB_VIRT_BASE,
-		.pfn		= __phys_to_pfn(EP93XX_APB_PHYS_BASE),
-		.length		= EP93XX_APB_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init ep93xx_map_io(void)
-{
-	iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc));
-}
-
-/*************************************************************************
- * EP93xx IRQ handling
- *************************************************************************/
-void __init ep93xx_init_irq(void)
-{
-	vic_init(EP93XX_VIC1_BASE, IRQ_EP93XX_VIC0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
-	vic_init(EP93XX_VIC2_BASE, IRQ_EP93XX_VIC1, EP93XX_VIC2_VALID_IRQ_MASK, 0);
-}
-
-
-/*************************************************************************
- * EP93xx System Controller Software Locked register handling
- *************************************************************************/
-
-/*
- * syscon_swlock prevents anything else from writing to the syscon
- * block while a software locked register is being written.
- */
-static DEFINE_SPINLOCK(syscon_swlock);
-
-void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&syscon_swlock, flags);
-
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(val, reg);
-
-	spin_unlock_irqrestore(&syscon_swlock, flags);
-}
-
-void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
-{
-	unsigned long flags;
-	unsigned int val;
-
-	spin_lock_irqsave(&syscon_swlock, flags);
-
-	val = __raw_readl(EP93XX_SYSCON_DEVCFG);
-	val &= ~clear_bits;
-	val |= set_bits;
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(val, EP93XX_SYSCON_DEVCFG);
-
-	spin_unlock_irqrestore(&syscon_swlock, flags);
-}
-
-/**
- * ep93xx_chip_revision() - returns the EP93xx chip revision
- *
- * See "platform.h" for more information.
- */
-unsigned int ep93xx_chip_revision(void)
-{
-	unsigned int v;
-
-	v = __raw_readl(EP93XX_SYSCON_SYSCFG);
-	v &= EP93XX_SYSCON_SYSCFG_REV_MASK;
-	v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT;
-	return v;
-}
-EXPORT_SYMBOL_GPL(ep93xx_chip_revision);
-
-/*************************************************************************
- * EP93xx GPIO
- *************************************************************************/
-static struct resource ep93xx_gpio_resource[] = {
-	DEFINE_RES_MEM(EP93XX_GPIO_PHYS_BASE, 0xcc),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO0MUX),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO1MUX),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO2MUX),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO3MUX),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO4MUX),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO5MUX),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO6MUX),
-	DEFINE_RES_IRQ(IRQ_EP93XX_GPIO7MUX),
-};
-
-static struct platform_device ep93xx_gpio_device = {
-	.name		= "gpio-ep93xx",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_gpio_resource),
-	.resource	= ep93xx_gpio_resource,
-};
-
-/*************************************************************************
- * EP93xx peripheral handling
- *************************************************************************/
-#define EP93XX_UART_MCR_OFFSET		(0x0100)
-
-static void ep93xx_uart_set_mctrl(struct amba_device *dev,
-				  void __iomem *base, unsigned int mctrl)
-{
-	unsigned int mcr;
-
-	mcr = 0;
-	if (mctrl & TIOCM_RTS)
-		mcr |= 2;
-	if (mctrl & TIOCM_DTR)
-		mcr |= 1;
-
-	__raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
-}
-
-static struct amba_pl010_data ep93xx_uart_data = {
-	.set_mctrl	= ep93xx_uart_set_mctrl,
-};
-
-static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
-	{ IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
-
-static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
-	{ IRQ_EP93XX_UART2 }, NULL);
-
-static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
-	{ IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
-
-static struct resource ep93xx_rtc_resource[] = {
-	DEFINE_RES_MEM(EP93XX_RTC_PHYS_BASE, 0x10c),
-};
-
-static struct platform_device ep93xx_rtc_device = {
-	.name		= "ep93xx-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_rtc_resource),
-	.resource	= ep93xx_rtc_resource,
-};
-
-/*************************************************************************
- * EP93xx OHCI USB Host
- *************************************************************************/
-
-static struct clk *ep93xx_ohci_host_clock;
-
-static int ep93xx_ohci_power_on(struct platform_device *pdev)
-{
-	if (!ep93xx_ohci_host_clock) {
-		ep93xx_ohci_host_clock = devm_clk_get(&pdev->dev, NULL);
-		if (IS_ERR(ep93xx_ohci_host_clock))
-			return PTR_ERR(ep93xx_ohci_host_clock);
-	}
-
-	return clk_prepare_enable(ep93xx_ohci_host_clock);
-}
-
-static void ep93xx_ohci_power_off(struct platform_device *pdev)
-{
-	clk_disable(ep93xx_ohci_host_clock);
-}
-
-static struct usb_ohci_pdata ep93xx_ohci_pdata = {
-	.power_on	= ep93xx_ohci_power_on,
-	.power_off	= ep93xx_ohci_power_off,
-	.power_suspend	= ep93xx_ohci_power_off,
-};
-
-static struct resource ep93xx_ohci_resources[] = {
-	DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE, 0x1000),
-	DEFINE_RES_IRQ(IRQ_EP93XX_USB),
-};
-
-static u64 ep93xx_ohci_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_ohci_device = {
-	.name		= "ohci-platform",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_ohci_resources),
-	.resource	= ep93xx_ohci_resources,
-	.dev		= {
-		.dma_mask		= &ep93xx_ohci_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &ep93xx_ohci_pdata,
-	},
-};
-
-/*************************************************************************
- * EP93xx physmap'ed flash
- *************************************************************************/
-static struct physmap_flash_data ep93xx_flash_data;
-
-static struct resource ep93xx_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ep93xx_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &ep93xx_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &ep93xx_flash_resource,
-};
-
-/**
- * ep93xx_register_flash() - Register the external flash device.
- * @width:	bank width in octets
- * @start:	resource start address
- * @size:	resource size
- */
-void __init ep93xx_register_flash(unsigned int width,
-				  resource_size_t start, resource_size_t size)
-{
-	ep93xx_flash_data.width		= width;
-
-	ep93xx_flash_resource.start	= start;
-	ep93xx_flash_resource.end	= start + size - 1;
-
-	platform_device_register(&ep93xx_flash);
-}
-
-
-/*************************************************************************
- * EP93xx ethernet peripheral handling
- *************************************************************************/
-static struct ep93xx_eth_data ep93xx_eth_data;
-
-static struct resource ep93xx_eth_resource[] = {
-	DEFINE_RES_MEM(EP93XX_ETHERNET_PHYS_BASE, 0x10000),
-	DEFINE_RES_IRQ(IRQ_EP93XX_ETHERNET),
-};
-
-static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_eth_device = {
-	.name		= "ep93xx-eth",
-	.id		= -1,
-	.dev		= {
-		.platform_data		= &ep93xx_eth_data,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.dma_mask		= &ep93xx_eth_dma_mask,
-	},
-	.num_resources	= ARRAY_SIZE(ep93xx_eth_resource),
-	.resource	= ep93xx_eth_resource,
-};
-
-/**
- * ep93xx_register_eth - Register the built-in ethernet platform device.
- * @data:	platform specific ethernet configuration (__initdata)
- * @copy_addr:	flag indicating that the MAC address should be copied
- *		from the IndAd registers (as programmed by the bootloader)
- */
-void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
-{
-	if (copy_addr)
-		memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6);
-
-	ep93xx_eth_data = *data;
-	platform_device_register(&ep93xx_eth_device);
-}
-
-
-/*************************************************************************
- * EP93xx i2c peripheral handling
- *************************************************************************/
-
-/* All EP93xx devices use the same two GPIO pins for I2C bit-banging */
-static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio.0",
-	.table		= {
-		/* Use local offsets on gpiochip/port "G" */
-		GPIO_LOOKUP_IDX("G", 1, NULL, 0,
-				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP_IDX("G", 0, NULL, 1,
-				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct platform_device ep93xx_i2c_device = {
-	.name		= "i2c-gpio",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= NULL,
-	},
-};
-
-/**
- * ep93xx_register_i2c - Register the i2c platform device.
- * @devices:	platform specific i2c bus device information (__initdata)
- * @num:	the number of devices on the i2c bus
- */
-void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
-{
-	/*
-	 * FIXME: this just sets the two pins as non-opendrain, as no
-	 * platforms tries to do that anyway. Flag the applicable lines
-	 * as open drain in the GPIO_LOOKUP above and the driver or
-	 * gpiolib will handle open drain/open drain emulation as need
-	 * be. Right now i2c-gpio emulates open drain which is not
-	 * optimal.
-	 */
-	__raw_writel((0 << 1) | (0 << 0),
-		     EP93XX_GPIO_EEDRIVE);
-
-	i2c_register_board_info(0, devices, num);
-	gpiod_add_lookup_table(&ep93xx_i2c_gpiod_table);
-	platform_device_register(&ep93xx_i2c_device);
-}
-
-/*************************************************************************
- * EP93xx SPI peripheral handling
- *************************************************************************/
-static struct ep93xx_spi_info ep93xx_spi_master_data;
-
-static struct resource ep93xx_spi_resources[] = {
-	DEFINE_RES_MEM(EP93XX_SPI_PHYS_BASE, 0x18),
-	DEFINE_RES_IRQ(IRQ_EP93XX_SSP),
-};
-
-static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_spi_device = {
-	.name		= "ep93xx-spi",
-	.id		= 0,
-	.dev		= {
-		.platform_data		= &ep93xx_spi_master_data,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.dma_mask		= &ep93xx_spi_dma_mask,
-	},
-	.num_resources	= ARRAY_SIZE(ep93xx_spi_resources),
-	.resource	= ep93xx_spi_resources,
-};
-
-/**
- * ep93xx_register_spi() - registers spi platform device
- * @info: ep93xx board specific spi master info (__initdata)
- * @devices: SPI devices to register (__initdata)
- * @num: number of SPI devices to register
- *
- * This function registers platform device for the EP93xx SPI controller and
- * also makes sure that SPI pins are muxed so that I2S is not using those pins.
- */
-void __init ep93xx_register_spi(struct ep93xx_spi_info *info,
-				struct spi_board_info *devices, int num)
-{
-	/*
-	 * When SPI is used, we need to make sure that I2S is muxed off from
-	 * SPI pins.
-	 */
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP);
-
-	ep93xx_spi_master_data = *info;
-	spi_register_board_info(devices, num);
-	platform_device_register(&ep93xx_spi_device);
-}
-
-/*************************************************************************
- * EP93xx LEDs
- *************************************************************************/
-static const struct gpio_led ep93xx_led_pins[] __initconst = {
-	{
-		.name	= "platform:grled",
-		.gpio	= EP93XX_GPIO_LINE_GRLED,
-	}, {
-		.name	= "platform:rdled",
-		.gpio	= EP93XX_GPIO_LINE_RDLED,
-	},
-};
-
-static const struct gpio_led_platform_data ep93xx_led_data __initconst = {
-	.num_leds	= ARRAY_SIZE(ep93xx_led_pins),
-	.leds		= ep93xx_led_pins,
-};
-
-/*************************************************************************
- * EP93xx pwm peripheral handling
- *************************************************************************/
-static struct resource ep93xx_pwm0_resource[] = {
-	DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE, 0x10),
-};
-
-static struct platform_device ep93xx_pwm0_device = {
-	.name		= "ep93xx-pwm",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(ep93xx_pwm0_resource),
-	.resource	= ep93xx_pwm0_resource,
-};
-
-static struct resource ep93xx_pwm1_resource[] = {
-	DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE + 0x20, 0x10),
-};
-
-static struct platform_device ep93xx_pwm1_device = {
-	.name		= "ep93xx-pwm",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(ep93xx_pwm1_resource),
-	.resource	= ep93xx_pwm1_resource,
-};
-
-void __init ep93xx_register_pwm(int pwm0, int pwm1)
-{
-	if (pwm0)
-		platform_device_register(&ep93xx_pwm0_device);
-
-	/* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
-	if (pwm1)
-		platform_device_register(&ep93xx_pwm1_device);
-}
-
-int ep93xx_pwm_acquire_gpio(struct platform_device *pdev)
-{
-	int err;
-
-	if (pdev->id == 0) {
-		err = 0;
-	} else if (pdev->id == 1) {
-		err = gpio_request(EP93XX_GPIO_LINE_EGPIO14,
-				   dev_name(&pdev->dev));
-		if (err)
-			return err;
-		err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0);
-		if (err)
-			goto fail;
-
-		/* PWM 1 output on EGPIO[14] */
-		ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG);
-	} else {
-		err = -ENODEV;
-	}
-
-	return err;
-
-fail:
-	gpio_free(EP93XX_GPIO_LINE_EGPIO14);
-	return err;
-}
-EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio);
-
-void ep93xx_pwm_release_gpio(struct platform_device *pdev)
-{
-	if (pdev->id == 1) {
-		gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14);
-		gpio_free(EP93XX_GPIO_LINE_EGPIO14);
-
-		/* EGPIO[14] used for GPIO */
-		ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG);
-	}
-}
-EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
-
-
-/*************************************************************************
- * EP93xx video peripheral handling
- *************************************************************************/
-static struct ep93xxfb_mach_info ep93xxfb_data;
-
-static struct resource ep93xx_fb_resource[] = {
-	DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE, 0x800),
-};
-
-static struct platform_device ep93xx_fb_device = {
-	.name			= "ep93xx-fb",
-	.id			= -1,
-	.dev			= {
-		.platform_data		= &ep93xxfb_data,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.dma_mask		= &ep93xx_fb_device.dev.coherent_dma_mask,
-	},
-	.num_resources		= ARRAY_SIZE(ep93xx_fb_resource),
-	.resource		= ep93xx_fb_resource,
-};
-
-/* The backlight use a single register in the framebuffer's register space */
-#define EP93XX_RASTER_REG_BRIGHTNESS 0x20
-
-static struct resource ep93xx_bl_resources[] = {
-	DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE +
-		       EP93XX_RASTER_REG_BRIGHTNESS, 0x04),
-};
-
-static struct platform_device ep93xx_bl_device = {
-	.name		= "ep93xx-bl",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_bl_resources),
-	.resource	= ep93xx_bl_resources,
-};
-
-/**
- * ep93xx_register_fb - Register the framebuffer platform device.
- * @data:	platform specific framebuffer configuration (__initdata)
- */
-void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
-{
-	ep93xxfb_data = *data;
-	platform_device_register(&ep93xx_fb_device);
-	platform_device_register(&ep93xx_bl_device);
-}
-
-
-/*************************************************************************
- * EP93xx matrix keypad peripheral handling
- *************************************************************************/
-static struct ep93xx_keypad_platform_data ep93xx_keypad_data;
-
-static struct resource ep93xx_keypad_resource[] = {
-	DEFINE_RES_MEM(EP93XX_KEY_MATRIX_PHYS_BASE, 0x0c),
-	DEFINE_RES_IRQ(IRQ_EP93XX_KEY),
-};
-
-static struct platform_device ep93xx_keypad_device = {
-	.name		= "ep93xx-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &ep93xx_keypad_data,
-	},
-	.num_resources	= ARRAY_SIZE(ep93xx_keypad_resource),
-	.resource	= ep93xx_keypad_resource,
-};
-
-/**
- * ep93xx_register_keypad - Register the keypad platform device.
- * @data:	platform specific keypad configuration (__initdata)
- */
-void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
-{
-	ep93xx_keypad_data = *data;
-	platform_device_register(&ep93xx_keypad_device);
-}
-
-int ep93xx_keypad_acquire_gpio(struct platform_device *pdev)
-{
-	int err;
-	int i;
-
-	for (i = 0; i < 8; i++) {
-		err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev));
-		if (err)
-			goto fail_gpio_c;
-		err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev));
-		if (err)
-			goto fail_gpio_d;
-	}
-
-	/* Enable the keypad controller; GPIO ports C and D used for keypad */
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS |
-				 EP93XX_SYSCON_DEVCFG_GONK);
-
-	return 0;
-
-fail_gpio_d:
-	gpio_free(EP93XX_GPIO_LINE_C(i));
-fail_gpio_c:
-	for (--i; i >= 0; --i) {
-		gpio_free(EP93XX_GPIO_LINE_C(i));
-		gpio_free(EP93XX_GPIO_LINE_D(i));
-	}
-	return err;
-}
-EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio);
-
-void ep93xx_keypad_release_gpio(struct platform_device *pdev)
-{
-	int i;
-
-	for (i = 0; i < 8; i++) {
-		gpio_free(EP93XX_GPIO_LINE_C(i));
-		gpio_free(EP93XX_GPIO_LINE_D(i));
-	}
-
-	/* Disable the keypad controller; GPIO ports C and D used for GPIO */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
-			       EP93XX_SYSCON_DEVCFG_GONK);
-}
-EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
-
-/*************************************************************************
- * EP93xx I2S audio peripheral handling
- *************************************************************************/
-static struct resource ep93xx_i2s_resource[] = {
-	DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100),
-	DEFINE_RES_IRQ(IRQ_EP93XX_SAI),
-};
-
-static struct platform_device ep93xx_i2s_device = {
-	.name		= "ep93xx-i2s",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_i2s_resource),
-	.resource	= ep93xx_i2s_resource,
-};
-
-static struct platform_device ep93xx_pcm_device = {
-	.name		= "ep93xx-pcm-audio",
-	.id		= -1,
-};
-
-void __init ep93xx_register_i2s(void)
-{
-	platform_device_register(&ep93xx_i2s_device);
-	platform_device_register(&ep93xx_pcm_device);
-}
-
-#define EP93XX_SYSCON_DEVCFG_I2S_MASK	(EP93XX_SYSCON_DEVCFG_I2SONSSP | \
-					 EP93XX_SYSCON_DEVCFG_I2SONAC97)
-
-#define EP93XX_I2SCLKDIV_MASK		(EP93XX_SYSCON_I2SCLKDIV_ORIDE | \
-					 EP93XX_SYSCON_I2SCLKDIV_SPOL)
-
-int ep93xx_i2s_acquire(void)
-{
-	unsigned val;
-
-	ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97,
-			EP93XX_SYSCON_DEVCFG_I2S_MASK);
-
-	/*
-	 * This is potentially racy with the clock api for i2s_mclk, sclk and 
-	 * lrclk. Since the i2s driver is the only user of those clocks we
-	 * rely on it to prevent parallel use of this function and the 
-	 * clock api for the i2s clocks.
-	 */
-	val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
-	val &= ~EP93XX_I2SCLKDIV_MASK;
-	val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL;
-	ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV);
-
-	return 0;
-}
-EXPORT_SYMBOL(ep93xx_i2s_acquire);
-
-void ep93xx_i2s_release(void)
-{
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
-}
-EXPORT_SYMBOL(ep93xx_i2s_release);
-
-/*************************************************************************
- * EP93xx AC97 audio peripheral handling
- *************************************************************************/
-static struct resource ep93xx_ac97_resources[] = {
-	DEFINE_RES_MEM(EP93XX_AAC_PHYS_BASE, 0xac),
-	DEFINE_RES_IRQ(IRQ_EP93XX_AACINTR),
-};
-
-static struct platform_device ep93xx_ac97_device = {
-	.name		= "ep93xx-ac97",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_ac97_resources),
-	.resource	= ep93xx_ac97_resources,
-};
-
-void __init ep93xx_register_ac97(void)
-{
-	/*
-	 * Make sure that the AC97 pins are not used by I2S.
-	 */
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97);
-
-	platform_device_register(&ep93xx_ac97_device);
-	platform_device_register(&ep93xx_pcm_device);
-}
-
-/*************************************************************************
- * EP93xx Watchdog
- *************************************************************************/
-static struct resource ep93xx_wdt_resources[] = {
-	DEFINE_RES_MEM(EP93XX_WATCHDOG_PHYS_BASE, 0x08),
-};
-
-static struct platform_device ep93xx_wdt_device = {
-	.name		= "ep93xx-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_wdt_resources),
-	.resource	= ep93xx_wdt_resources,
-};
-
-/*************************************************************************
- * EP93xx IDE
- *************************************************************************/
-static struct resource ep93xx_ide_resources[] = {
-	DEFINE_RES_MEM(EP93XX_IDE_PHYS_BASE, 0x38),
-	DEFINE_RES_IRQ(IRQ_EP93XX_EXT3),
-};
-
-static struct platform_device ep93xx_ide_device = {
-	.name		= "ep93xx-ide",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &ep93xx_ide_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(ep93xx_ide_resources),
-	.resource	= ep93xx_ide_resources,
-};
-
-void __init ep93xx_register_ide(void)
-{
-	platform_device_register(&ep93xx_ide_device);
-}
-
-int ep93xx_ide_acquire_gpio(struct platform_device *pdev)
-{
-	int err;
-	int i;
-
-	err = gpio_request(EP93XX_GPIO_LINE_EGPIO2, dev_name(&pdev->dev));
-	if (err)
-		return err;
-	err = gpio_request(EP93XX_GPIO_LINE_EGPIO15, dev_name(&pdev->dev));
-	if (err)
-		goto fail_egpio15;
-	for (i = 2; i < 8; i++) {
-		err = gpio_request(EP93XX_GPIO_LINE_E(i), dev_name(&pdev->dev));
-		if (err)
-			goto fail_gpio_e;
-	}
-	for (i = 4; i < 8; i++) {
-		err = gpio_request(EP93XX_GPIO_LINE_G(i), dev_name(&pdev->dev));
-		if (err)
-			goto fail_gpio_g;
-	}
-	for (i = 0; i < 8; i++) {
-		err = gpio_request(EP93XX_GPIO_LINE_H(i), dev_name(&pdev->dev));
-		if (err)
-			goto fail_gpio_h;
-	}
-
-	/* GPIO ports E[7:2], G[7:4] and H used by IDE */
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_EONIDE |
-				 EP93XX_SYSCON_DEVCFG_GONIDE |
-				 EP93XX_SYSCON_DEVCFG_HONIDE);
-	return 0;
-
-fail_gpio_h:
-	for (--i; i >= 0; --i)
-		gpio_free(EP93XX_GPIO_LINE_H(i));
-	i = 8;
-fail_gpio_g:
-	for (--i; i >= 4; --i)
-		gpio_free(EP93XX_GPIO_LINE_G(i));
-	i = 8;
-fail_gpio_e:
-	for (--i; i >= 2; --i)
-		gpio_free(EP93XX_GPIO_LINE_E(i));
-	gpio_free(EP93XX_GPIO_LINE_EGPIO15);
-fail_egpio15:
-	gpio_free(EP93XX_GPIO_LINE_EGPIO2);
-	return err;
-}
-EXPORT_SYMBOL(ep93xx_ide_acquire_gpio);
-
-void ep93xx_ide_release_gpio(struct platform_device *pdev)
-{
-	int i;
-
-	for (i = 2; i < 8; i++)
-		gpio_free(EP93XX_GPIO_LINE_E(i));
-	for (i = 4; i < 8; i++)
-		gpio_free(EP93XX_GPIO_LINE_G(i));
-	for (i = 0; i < 8; i++)
-		gpio_free(EP93XX_GPIO_LINE_H(i));
-	gpio_free(EP93XX_GPIO_LINE_EGPIO15);
-	gpio_free(EP93XX_GPIO_LINE_EGPIO2);
-
-
-	/* GPIO ports E[7:2], G[7:4] and H used by GPIO */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_EONIDE |
-			       EP93XX_SYSCON_DEVCFG_GONIDE |
-			       EP93XX_SYSCON_DEVCFG_HONIDE);
-}
-EXPORT_SYMBOL(ep93xx_ide_release_gpio);
-
-/*************************************************************************
- * EP93xx ADC
- *************************************************************************/
-static struct resource ep93xx_adc_resources[] = {
-	DEFINE_RES_MEM(EP93XX_ADC_PHYS_BASE, 0x28),
-	DEFINE_RES_IRQ(IRQ_EP93XX_TOUCH),
-};
-
-static struct platform_device ep93xx_adc_device = {
-	.name		= "ep93xx-adc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_adc_resources),
-	.resource	= ep93xx_adc_resources,
-};
-
-void __init ep93xx_register_adc(void)
-{
-	/* Power up ADC, deactivate Touch Screen Controller */
-	ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_TIN,
-				EP93XX_SYSCON_DEVCFG_ADCPD);
-
-	platform_device_register(&ep93xx_adc_device);
-}
-
-/*************************************************************************
- * EP93xx Security peripheral
- *************************************************************************/
-
-/*
- * The Maverick Key is 256 bits of micro fuses blown at the factory during
- * manufacturing to uniquely identify a part.
- *
- * See: http://arm.cirrus.com/forum/viewtopic.php?t=486&highlight=maverick+key
- */
-#define EP93XX_SECURITY_REG(x)		(EP93XX_SECURITY_BASE + (x))
-#define EP93XX_SECURITY_SECFLG		EP93XX_SECURITY_REG(0x2400)
-#define EP93XX_SECURITY_FUSEFLG		EP93XX_SECURITY_REG(0x2410)
-#define EP93XX_SECURITY_UNIQID		EP93XX_SECURITY_REG(0x2440)
-#define EP93XX_SECURITY_UNIQCHK		EP93XX_SECURITY_REG(0x2450)
-#define EP93XX_SECURITY_UNIQVAL		EP93XX_SECURITY_REG(0x2460)
-#define EP93XX_SECURITY_SECID1		EP93XX_SECURITY_REG(0x2500)
-#define EP93XX_SECURITY_SECID2		EP93XX_SECURITY_REG(0x2504)
-#define EP93XX_SECURITY_SECCHK1		EP93XX_SECURITY_REG(0x2520)
-#define EP93XX_SECURITY_SECCHK2		EP93XX_SECURITY_REG(0x2524)
-#define EP93XX_SECURITY_UNIQID2		EP93XX_SECURITY_REG(0x2700)
-#define EP93XX_SECURITY_UNIQID3		EP93XX_SECURITY_REG(0x2704)
-#define EP93XX_SECURITY_UNIQID4		EP93XX_SECURITY_REG(0x2708)
-#define EP93XX_SECURITY_UNIQID5		EP93XX_SECURITY_REG(0x270c)
-
-static char ep93xx_soc_id[33];
-
-static const char __init *ep93xx_get_soc_id(void)
-{
-	unsigned int id, id2, id3, id4, id5;
-
-	if (__raw_readl(EP93XX_SECURITY_UNIQVAL) != 1)
-		return "bad Hamming code";
-
-	id = __raw_readl(EP93XX_SECURITY_UNIQID);
-	id2 = __raw_readl(EP93XX_SECURITY_UNIQID2);
-	id3 = __raw_readl(EP93XX_SECURITY_UNIQID3);
-	id4 = __raw_readl(EP93XX_SECURITY_UNIQID4);
-	id5 = __raw_readl(EP93XX_SECURITY_UNIQID5);
-
-	if (id != id2)
-		return "invalid";
-
-	/* Toss the unique ID into the entropy pool */
-	add_device_randomness(&id2, 4);
-	add_device_randomness(&id3, 4);
-	add_device_randomness(&id4, 4);
-	add_device_randomness(&id5, 4);
-
-	snprintf(ep93xx_soc_id, sizeof(ep93xx_soc_id),
-		 "%08x%08x%08x%08x", id2, id3, id4, id5);
-
-	return ep93xx_soc_id;
-}
-
-static const char __init *ep93xx_get_soc_rev(void)
-{
-	int rev = ep93xx_chip_revision();
-
-	switch (rev) {
-	case EP93XX_CHIP_REV_D0:
-		return "D0";
-	case EP93XX_CHIP_REV_D1:
-		return "D1";
-	case EP93XX_CHIP_REV_E0:
-		return "E0";
-	case EP93XX_CHIP_REV_E1:
-		return "E1";
-	case EP93XX_CHIP_REV_E2:
-		return "E2";
-	default:
-		return "unknown";
-	}
-}
-
-static const char __init *ep93xx_get_machine_name(void)
-{
-	return kasprintf(GFP_KERNEL,"%s", machine_desc->name);
-}
-
-static struct device __init *ep93xx_init_soc(void)
-{
-	struct soc_device_attribute *soc_dev_attr;
-	struct soc_device *soc_dev;
-
-	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
-	if (!soc_dev_attr)
-		return NULL;
-
-	soc_dev_attr->machine = ep93xx_get_machine_name();
-	soc_dev_attr->family = "Cirrus Logic EP93xx";
-	soc_dev_attr->revision = ep93xx_get_soc_rev();
-	soc_dev_attr->soc_id = ep93xx_get_soc_id();
-
-	soc_dev = soc_device_register(soc_dev_attr);
-	if (IS_ERR(soc_dev)) {
-		kfree(soc_dev_attr->machine);
-		kfree(soc_dev_attr);
-		return NULL;
-	}
-
-	return soc_device_to_device(soc_dev);
-}
-
-struct device __init *ep93xx_init_devices(void)
-{
-	struct device *parent;
-
-	/* Disallow access to MaverickCrunch initially */
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
-
-	/* Default all ports to GPIO */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
-			       EP93XX_SYSCON_DEVCFG_GONK |
-			       EP93XX_SYSCON_DEVCFG_EONIDE |
-			       EP93XX_SYSCON_DEVCFG_GONIDE |
-			       EP93XX_SYSCON_DEVCFG_HONIDE);
-
-	parent = ep93xx_init_soc();
-
-	/* Get the GPIO working early, other devices need it */
-	platform_device_register(&ep93xx_gpio_device);
-
-	amba_device_register(&uart1_device, &iomem_resource);
-	amba_device_register(&uart2_device, &iomem_resource);
-	amba_device_register(&uart3_device, &iomem_resource);
-
-	platform_device_register(&ep93xx_rtc_device);
-	platform_device_register(&ep93xx_ohci_device);
-	platform_device_register(&ep93xx_wdt_device);
-
-	gpio_led_register_device(-1, &ep93xx_led_data);
-
-	return parent;
-}
-
-void ep93xx_restart(enum reboot_mode mode, const char *cmd)
-{
-	/*
-	 * Set then clear the SWRST bit to initiate a software reset
-	 */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
-
-	while (1)
-		;
-}
diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c
deleted file mode 100644
index 74515acab8ef..000000000000
--- a/arch/arm/mach-ep93xx/dma.c
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/dma.c
- *
- * Platform support code for the EP93xx dmaengine driver.
- *
- * Copyright (C) 2011 Mika Westerberg
- *
- * This work is based on the original dma-m2p implementation with
- * following copyrights:
- *
- *   Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *   Copyright (C) 2006 Applied Data Systems
- *   Copyright (C) 2009 Ryan Mallon <rmallon@gmail.com>
- */
-
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/platform_data/dma-ep93xx.h>
-#include "hardware.h"
-
-#include "soc.h"
-
-#define DMA_CHANNEL(_name, _base, _irq) \
-	{ .name = (_name), .base = (_base), .irq = (_irq) }
-
-/*
- * DMA M2P channels.
- *
- * On the EP93xx chip the following peripherals my be allocated to the 10
- * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive).
- *
- *	I2S	contains 3 Tx and 3 Rx DMA Channels
- *	AAC	contains 3 Tx and 3 Rx DMA Channels
- *	UART1	contains 1 Tx and 1 Rx DMA Channels
- *	UART2	contains 1 Tx and 1 Rx DMA Channels
- *	UART3	contains 1 Tx and 1 Rx DMA Channels
- *	IrDA	contains 1 Tx and 1 Rx DMA Channels
- *
- * Registers are mapped statically in ep93xx_map_io().
- */
-static struct ep93xx_dma_chan_data ep93xx_dma_m2p_channels[] = {
-	DMA_CHANNEL("m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0),
-	DMA_CHANNEL("m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1),
-	DMA_CHANNEL("m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2),
-	DMA_CHANNEL("m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3),
-	DMA_CHANNEL("m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4),
-	DMA_CHANNEL("m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5),
-	DMA_CHANNEL("m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6),
-	DMA_CHANNEL("m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7),
-	DMA_CHANNEL("m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8),
-	DMA_CHANNEL("m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9),
-};
-
-static struct ep93xx_dma_platform_data ep93xx_dma_m2p_data = {
-	.channels		= ep93xx_dma_m2p_channels,
-	.num_channels		= ARRAY_SIZE(ep93xx_dma_m2p_channels),
-};
-
-static u64 ep93xx_dma_m2p_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_dma_m2p_device = {
-	.name			= "ep93xx-dma-m2p",
-	.id			= -1,
-	.dev			= {
-		.platform_data		= &ep93xx_dma_m2p_data,
-		.dma_mask		= &ep93xx_dma_m2p_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-/*
- * DMA M2M channels.
- *
- * There are 2 M2M channels which support memcpy/memset and in addition simple
- * hardware requests from/to SSP and IDE. We do not implement an external
- * hardware requests.
- *
- * Registers are mapped statically in ep93xx_map_io().
- */
-static struct ep93xx_dma_chan_data ep93xx_dma_m2m_channels[] = {
-	DMA_CHANNEL("m2m0", EP93XX_DMA_BASE + 0x0100, IRQ_EP93XX_DMAM2M0),
-	DMA_CHANNEL("m2m1", EP93XX_DMA_BASE + 0x0140, IRQ_EP93XX_DMAM2M1),
-};
-
-static struct ep93xx_dma_platform_data ep93xx_dma_m2m_data = {
-	.channels		= ep93xx_dma_m2m_channels,
-	.num_channels		= ARRAY_SIZE(ep93xx_dma_m2m_channels),
-};
-
-static u64 ep93xx_dma_m2m_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_dma_m2m_device = {
-	.name			= "ep93xx-dma-m2m",
-	.id			= -1,
-	.dev			= {
-		.platform_data		= &ep93xx_dma_m2m_data,
-		.dma_mask		= &ep93xx_dma_m2m_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static int __init ep93xx_dma_init(void)
-{
-	platform_device_register(&ep93xx_dma_m2p_device);
-	platform_device_register(&ep93xx_dma_m2m_device);
-	return 0;
-}
-arch_initcall(ep93xx_dma_init);
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
deleted file mode 100644
index 4b90899a66e9..000000000000
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ /dev/null
@@ -1,344 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/edb93xx.c
- * Cirrus Logic EDB93xx Development Board support.
- *
- * EDB93XX, EDB9301, EDB9307A
- * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com>
- *
- * EDB9302
- * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
- *
- * EDB9302A, EDB9315, EDB9315A
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * EDB9307
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- *
- * EDB9312
- * Copyright (C) 2006 Infosys Technologies Limited
- *                    Toufeeq Hussain <toufeeq_hussain@infosys.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio/machine.h>
-
-#include <sound/cs4271.h>
-
-#include "hardware.h"
-#include <linux/platform_data/video-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include "gpio-ep93xx.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static void __init edb93xx_register_flash(void)
-{
-	if (machine_is_edb9307() || machine_is_edb9312() ||
-	    machine_is_edb9315()) {
-		ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
-	} else {
-		ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
-	}
-}
-
-static struct ep93xx_eth_data __initdata edb93xx_eth_data = {
-	.phy_id		= 1,
-};
-
-
-/*************************************************************************
- * EDB93xx i2c peripheral handling
- *************************************************************************/
-
-static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("isl1208", 0x6f),
-	},
-};
-
-static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68),
-	},
-};
-
-static void __init edb93xx_register_i2c(void)
-{
-	if (machine_is_edb9302a() || machine_is_edb9307a() ||
-	    machine_is_edb9315a()) {
-		ep93xx_register_i2c(edb93xxa_i2c_board_info,
-				    ARRAY_SIZE(edb93xxa_i2c_board_info));
-	} else if (machine_is_edb9302() || machine_is_edb9307()
-		|| machine_is_edb9312() || machine_is_edb9315()) {
-		ep93xx_register_i2c(edb93xx_i2c_board_info,
-				    ARRAY_SIZE(edb93xx_i2c_board_info));
-	}
-}
-
-
-/*************************************************************************
- * EDB93xx SPI peripheral handling
- *************************************************************************/
-static struct cs4271_platform_data edb93xx_cs4271_data = {
-	.gpio_nreset	= -EINVAL,	/* filled in later */
-};
-
-static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
-	{
-		.modalias		= "cs4271",
-		.platform_data		= &edb93xx_cs4271_data,
-		.max_speed_hz		= 6000000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-		.mode			= SPI_MODE_3,
-	},
-};
-
-static struct gpiod_lookup_table edb93xx_spi_cs_gpio_table = {
-	.dev_id = "spi0",
-	.table = {
-		GPIO_LOOKUP("A", 6, "cs", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
-	/* Intentionally left blank */
-};
-
-static void __init edb93xx_register_spi(void)
-{
-	if (machine_is_edb9301() || machine_is_edb9302())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
-	else if (machine_is_edb9302a() || machine_is_edb9307a())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2);
-	else if (machine_is_edb9315a())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
-
-	gpiod_add_lookup_table(&edb93xx_spi_cs_gpio_table);
-	ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
-			    ARRAY_SIZE(edb93xx_spi_board_info));
-}
-
-
-/*************************************************************************
- * EDB93xx I2S
- *************************************************************************/
-static struct platform_device edb93xx_audio_device = {
-	.name		= "edb93xx-audio",
-	.id		= -1,
-};
-
-static int __init edb93xx_has_audio(void)
-{
-	return (machine_is_edb9301() || machine_is_edb9302() ||
-		machine_is_edb9302a() || machine_is_edb9307a() ||
-		machine_is_edb9315a());
-}
-
-static void __init edb93xx_register_i2s(void)
-{
-	if (edb93xx_has_audio()) {
-		ep93xx_register_i2s();
-		platform_device_register(&edb93xx_audio_device);
-	}
-}
-
-
-/*************************************************************************
- * EDB93xx pwm
- *************************************************************************/
-static void __init edb93xx_register_pwm(void)
-{
-	if (machine_is_edb9301() ||
-	    machine_is_edb9302() || machine_is_edb9302a()) {
-		/* EP9301 and EP9302 only have pwm.1 (EGPIO14) */
-		ep93xx_register_pwm(0, 1);
-	} else if (machine_is_edb9307() || machine_is_edb9307a()) {
-		/* EP9307 only has pwm.0 (PWMOUT) */
-		ep93xx_register_pwm(1, 0);
-	} else {
-		/* EP9312 and EP9315 have both */
-		ep93xx_register_pwm(1, 1);
-	}
-}
-
-
-/*************************************************************************
- * EDB93xx framebuffer
- *************************************************************************/
-static struct ep93xxfb_mach_info __initdata edb93xxfb_info = {
-	.flags		= 0,
-};
-
-static int __init edb93xx_has_fb(void)
-{
-	/* These platforms have an ep93xx with video capability */
-	return machine_is_edb9307() || machine_is_edb9307a() ||
-	       machine_is_edb9312() || machine_is_edb9315() ||
-	       machine_is_edb9315a();
-}
-
-static void __init edb93xx_register_fb(void)
-{
-	if (!edb93xx_has_fb())
-		return;
-
-	if (machine_is_edb9307a() || machine_is_edb9315a())
-		edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0;
-	else
-		edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3;
-
-	ep93xx_register_fb(&edb93xxfb_info);
-}
-
-
-/*************************************************************************
- * EDB93xx IDE
- *************************************************************************/
-static int __init edb93xx_has_ide(void)
-{
-	/*
-	 * Although EDB9312 and EDB9315 do have IDE capability, they have
-	 * INTRQ line wired as pull-up, which makes using IDE interface
-	 * problematic.
-	 */
-	return machine_is_edb9312() || machine_is_edb9315() ||
-	       machine_is_edb9315a();
-}
-
-static void __init edb93xx_register_ide(void)
-{
-	if (!edb93xx_has_ide())
-		return;
-
-	ep93xx_register_ide();
-}
-
-
-static void __init edb93xx_init_machine(void)
-{
-	ep93xx_init_devices();
-	edb93xx_register_flash();
-	ep93xx_register_eth(&edb93xx_eth_data, 1);
-	edb93xx_register_i2c();
-	edb93xx_register_spi();
-	edb93xx_register_i2s();
-	edb93xx_register_pwm();
-	edb93xx_register_fb();
-	edb93xx_register_ide();
-	ep93xx_register_adc();
-}
-
-
-#ifdef CONFIG_MACH_EDB9301
-MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
-	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9302
-MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
-	/* Maintainer: George Kashperko <george@chas.com.ua> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9302A
-MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9307
-MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
-	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9307A
-MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
-	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9312
-MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
-	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9315
-MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9315A
-MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-ep93xx/ep93xx-regs.h b/arch/arm/mach-ep93xx/ep93xx-regs.h
deleted file mode 100644
index 8fa3646de0a4..000000000000
--- a/arch/arm/mach-ep93xx/ep93xx-regs.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_EP93XX_REGS_H
-#define __ASM_ARCH_EP93XX_REGS_H
-
-/*
- * EP93xx linux memory map:
- *
- * virt		phys		size
- * fe800000			5M		per-platform mappings
- * fed00000	80800000	2M		APB
- * fef00000	80000000	1M		AHB
- */
-
-#define EP93XX_AHB_PHYS_BASE		0x80000000
-#define EP93XX_AHB_VIRT_BASE		0xfef00000
-#define EP93XX_AHB_SIZE			0x00100000
-
-#define EP93XX_AHB_PHYS(x)		(EP93XX_AHB_PHYS_BASE + (x))
-#define EP93XX_AHB_IOMEM(x)		IOMEM(EP93XX_AHB_VIRT_BASE + (x))
-
-#define EP93XX_APB_PHYS_BASE		0x80800000
-#define EP93XX_APB_VIRT_BASE		0xfed00000
-#define EP93XX_APB_SIZE			0x00200000
-
-#define EP93XX_APB_PHYS(x)		(EP93XX_APB_PHYS_BASE + (x))
-#define EP93XX_APB_IOMEM(x)		IOMEM(EP93XX_APB_VIRT_BASE + (x))
-
-/* APB UARTs */
-#define EP93XX_UART1_PHYS_BASE		EP93XX_APB_PHYS(0x000c0000)
-#define EP93XX_UART1_BASE		EP93XX_APB_IOMEM(0x000c0000)
-
-#define EP93XX_UART2_PHYS_BASE		EP93XX_APB_PHYS(0x000d0000)
-#define EP93XX_UART2_BASE		EP93XX_APB_IOMEM(0x000d0000)
-
-#define EP93XX_UART3_PHYS_BASE		EP93XX_APB_PHYS(0x000e0000)
-#define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
-
-#endif
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
deleted file mode 100644
index 0b7043e3e178..000000000000
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/gesbc9312.c
- * Glomation GESBC-9312-sx support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/sizes.h>
-
-#include "hardware.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init gesbc9312_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_8M);
-	ep93xx_register_eth(&gesbc9312_eth_data, 0);
-}
-
-MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= gesbc9312_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/gpio-ep93xx.h b/arch/arm/mach-ep93xx/gpio-ep93xx.h
deleted file mode 100644
index 7b46eb7e5507..000000000000
--- a/arch/arm/mach-ep93xx/gpio-ep93xx.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Include file for the EP93XX GPIO controller machine specifics */
-
-#ifndef __GPIO_EP93XX_H
-#define __GPIO_EP93XX_H
-
-#include "ep93xx-regs.h"
-
-#define EP93XX_GPIO_PHYS_BASE		EP93XX_APB_PHYS(0x00040000)
-#define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
-#define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_STATUS	EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
-#define EP93XX_GPIO_EEDRIVE		EP93XX_GPIO_REG(0xc8)
-
-/* GPIO port A.  */
-#define EP93XX_GPIO_LINE_A(x)		((x) + 0)
-#define EP93XX_GPIO_LINE_EGPIO0		EP93XX_GPIO_LINE_A(0)
-#define EP93XX_GPIO_LINE_EGPIO1		EP93XX_GPIO_LINE_A(1)
-#define EP93XX_GPIO_LINE_EGPIO2		EP93XX_GPIO_LINE_A(2)
-#define EP93XX_GPIO_LINE_EGPIO3		EP93XX_GPIO_LINE_A(3)
-#define EP93XX_GPIO_LINE_EGPIO4		EP93XX_GPIO_LINE_A(4)
-#define EP93XX_GPIO_LINE_EGPIO5		EP93XX_GPIO_LINE_A(5)
-#define EP93XX_GPIO_LINE_EGPIO6		EP93XX_GPIO_LINE_A(6)
-#define EP93XX_GPIO_LINE_EGPIO7		EP93XX_GPIO_LINE_A(7)
-
-/* GPIO port B.  */
-#define EP93XX_GPIO_LINE_B(x)		((x) + 8)
-#define EP93XX_GPIO_LINE_EGPIO8		EP93XX_GPIO_LINE_B(0)
-#define EP93XX_GPIO_LINE_EGPIO9		EP93XX_GPIO_LINE_B(1)
-#define EP93XX_GPIO_LINE_EGPIO10	EP93XX_GPIO_LINE_B(2)
-#define EP93XX_GPIO_LINE_EGPIO11	EP93XX_GPIO_LINE_B(3)
-#define EP93XX_GPIO_LINE_EGPIO12	EP93XX_GPIO_LINE_B(4)
-#define EP93XX_GPIO_LINE_EGPIO13	EP93XX_GPIO_LINE_B(5)
-#define EP93XX_GPIO_LINE_EGPIO14	EP93XX_GPIO_LINE_B(6)
-#define EP93XX_GPIO_LINE_EGPIO15	EP93XX_GPIO_LINE_B(7)
-
-/* GPIO port C.  */
-#define EP93XX_GPIO_LINE_C(x)		((x) + 40)
-#define EP93XX_GPIO_LINE_ROW0		EP93XX_GPIO_LINE_C(0)
-#define EP93XX_GPIO_LINE_ROW1		EP93XX_GPIO_LINE_C(1)
-#define EP93XX_GPIO_LINE_ROW2		EP93XX_GPIO_LINE_C(2)
-#define EP93XX_GPIO_LINE_ROW3		EP93XX_GPIO_LINE_C(3)
-#define EP93XX_GPIO_LINE_ROW4		EP93XX_GPIO_LINE_C(4)
-#define EP93XX_GPIO_LINE_ROW5		EP93XX_GPIO_LINE_C(5)
-#define EP93XX_GPIO_LINE_ROW6		EP93XX_GPIO_LINE_C(6)
-#define EP93XX_GPIO_LINE_ROW7		EP93XX_GPIO_LINE_C(7)
-
-/* GPIO port D.  */
-#define EP93XX_GPIO_LINE_D(x)		((x) + 24)
-#define EP93XX_GPIO_LINE_COL0		EP93XX_GPIO_LINE_D(0)
-#define EP93XX_GPIO_LINE_COL1		EP93XX_GPIO_LINE_D(1)
-#define EP93XX_GPIO_LINE_COL2		EP93XX_GPIO_LINE_D(2)
-#define EP93XX_GPIO_LINE_COL3		EP93XX_GPIO_LINE_D(3)
-#define EP93XX_GPIO_LINE_COL4		EP93XX_GPIO_LINE_D(4)
-#define EP93XX_GPIO_LINE_COL5		EP93XX_GPIO_LINE_D(5)
-#define EP93XX_GPIO_LINE_COL6		EP93XX_GPIO_LINE_D(6)
-#define EP93XX_GPIO_LINE_COL7		EP93XX_GPIO_LINE_D(7)
-
-/* GPIO port E.  */
-#define EP93XX_GPIO_LINE_E(x)		((x) + 32)
-#define EP93XX_GPIO_LINE_GRLED		EP93XX_GPIO_LINE_E(0)
-#define EP93XX_GPIO_LINE_RDLED		EP93XX_GPIO_LINE_E(1)
-#define EP93XX_GPIO_LINE_DIORn		EP93XX_GPIO_LINE_E(2)
-#define EP93XX_GPIO_LINE_IDECS1n	EP93XX_GPIO_LINE_E(3)
-#define EP93XX_GPIO_LINE_IDECS2n	EP93XX_GPIO_LINE_E(4)
-#define EP93XX_GPIO_LINE_IDEDA0		EP93XX_GPIO_LINE_E(5)
-#define EP93XX_GPIO_LINE_IDEDA1		EP93XX_GPIO_LINE_E(6)
-#define EP93XX_GPIO_LINE_IDEDA2		EP93XX_GPIO_LINE_E(7)
-
-/* GPIO port F.  */
-#define EP93XX_GPIO_LINE_F(x)		((x) + 16)
-#define EP93XX_GPIO_LINE_WP		EP93XX_GPIO_LINE_F(0)
-#define EP93XX_GPIO_LINE_MCCD1		EP93XX_GPIO_LINE_F(1)
-#define EP93XX_GPIO_LINE_MCCD2		EP93XX_GPIO_LINE_F(2)
-#define EP93XX_GPIO_LINE_MCBVD1		EP93XX_GPIO_LINE_F(3)
-#define EP93XX_GPIO_LINE_MCBVD2		EP93XX_GPIO_LINE_F(4)
-#define EP93XX_GPIO_LINE_VS1		EP93XX_GPIO_LINE_F(5)
-#define EP93XX_GPIO_LINE_READY		EP93XX_GPIO_LINE_F(6)
-#define EP93XX_GPIO_LINE_VS2		EP93XX_GPIO_LINE_F(7)
-
-/* GPIO port G.  */
-#define EP93XX_GPIO_LINE_G(x)		((x) + 48)
-#define EP93XX_GPIO_LINE_EECLK		EP93XX_GPIO_LINE_G(0)
-#define EP93XX_GPIO_LINE_EEDAT		EP93XX_GPIO_LINE_G(1)
-#define EP93XX_GPIO_LINE_SLA0		EP93XX_GPIO_LINE_G(2)
-#define EP93XX_GPIO_LINE_SLA1		EP93XX_GPIO_LINE_G(3)
-#define EP93XX_GPIO_LINE_DD12		EP93XX_GPIO_LINE_G(4)
-#define EP93XX_GPIO_LINE_DD13		EP93XX_GPIO_LINE_G(5)
-#define EP93XX_GPIO_LINE_DD14		EP93XX_GPIO_LINE_G(6)
-#define EP93XX_GPIO_LINE_DD15		EP93XX_GPIO_LINE_G(7)
-
-/* GPIO port H.  */
-#define EP93XX_GPIO_LINE_H(x)		((x) + 56)
-#define EP93XX_GPIO_LINE_DD0		EP93XX_GPIO_LINE_H(0)
-#define EP93XX_GPIO_LINE_DD1		EP93XX_GPIO_LINE_H(1)
-#define EP93XX_GPIO_LINE_DD2		EP93XX_GPIO_LINE_H(2)
-#define EP93XX_GPIO_LINE_DD3		EP93XX_GPIO_LINE_H(3)
-#define EP93XX_GPIO_LINE_DD4		EP93XX_GPIO_LINE_H(4)
-#define EP93XX_GPIO_LINE_DD5		EP93XX_GPIO_LINE_H(5)
-#define EP93XX_GPIO_LINE_DD6		EP93XX_GPIO_LINE_H(6)
-#define EP93XX_GPIO_LINE_DD7		EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for gpio line identifiers */
-#define EP93XX_GPIO_LINE_MAX		EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for irq capable line identifiers */
-#define EP93XX_GPIO_LINE_MAX_IRQ	EP93XX_GPIO_LINE_F(7)
-
-#endif /* __GPIO_EP93XX_H */
diff --git a/arch/arm/mach-ep93xx/hardware.h b/arch/arm/mach-ep93xx/hardware.h
deleted file mode 100644
index e7d850e04782..000000000000
--- a/arch/arm/mach-ep93xx/hardware.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/hardware.h
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "platform.h"
-
-/*
- * The EP93xx has two external crystal oscillators.  To generate the
- * required high-frequency clocks, the processor uses two phase-locked-
- * loops (PLLs) to multiply the incoming external clock signal to much
- * higher frequencies that are then divided down by programmable dividers
- * to produce the needed clocks.  The PLLs operate independently of one
- * another.
- */
-#define EP93XX_EXT_CLK_RATE	14745600
-#define EP93XX_EXT_RTC_RATE	32768
-
-#define EP93XX_KEYTCHCLK_DIV4	(EP93XX_EXT_CLK_RATE / 4)
-#define EP93XX_KEYTCHCLK_DIV16	(EP93XX_EXT_CLK_RATE / 16)
-
-#endif
diff --git a/arch/arm/mach-ep93xx/irqs.h b/arch/arm/mach-ep93xx/irqs.h
deleted file mode 100644
index 353201b90c66..000000000000
--- a/arch/arm/mach-ep93xx/irqs.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define IRQ_EP93XX_VIC0			1
-
-#define IRQ_EP93XX_COMMRX		(IRQ_EP93XX_VIC0 + 2)
-#define IRQ_EP93XX_COMMTX		(IRQ_EP93XX_VIC0 + 3)
-#define IRQ_EP93XX_TIMER1		(IRQ_EP93XX_VIC0 + 4)
-#define IRQ_EP93XX_TIMER2		(IRQ_EP93XX_VIC0 + 5)
-#define IRQ_EP93XX_AACINTR		(IRQ_EP93XX_VIC0 + 6)
-#define IRQ_EP93XX_DMAM2P0		(IRQ_EP93XX_VIC0 + 7)
-#define IRQ_EP93XX_DMAM2P1		(IRQ_EP93XX_VIC0 + 8)
-#define IRQ_EP93XX_DMAM2P2		(IRQ_EP93XX_VIC0 + 9)
-#define IRQ_EP93XX_DMAM2P3		(IRQ_EP93XX_VIC0 + 10)
-#define IRQ_EP93XX_DMAM2P4		(IRQ_EP93XX_VIC0 + 11)
-#define IRQ_EP93XX_DMAM2P5		(IRQ_EP93XX_VIC0 + 12)
-#define IRQ_EP93XX_DMAM2P6		(IRQ_EP93XX_VIC0 + 13)
-#define IRQ_EP93XX_DMAM2P7		(IRQ_EP93XX_VIC0 + 14)
-#define IRQ_EP93XX_DMAM2P8		(IRQ_EP93XX_VIC0 + 15)
-#define IRQ_EP93XX_DMAM2P9		(IRQ_EP93XX_VIC0 + 16)
-#define IRQ_EP93XX_DMAM2M0		(IRQ_EP93XX_VIC0 + 17)
-#define IRQ_EP93XX_DMAM2M1		(IRQ_EP93XX_VIC0 + 18)
-#define IRQ_EP93XX_GPIO0MUX		(IRQ_EP93XX_VIC0 + 19)
-#define IRQ_EP93XX_GPIO1MUX		(IRQ_EP93XX_VIC0 + 20)
-#define IRQ_EP93XX_GPIO2MUX		(IRQ_EP93XX_VIC0 + 21)
-#define IRQ_EP93XX_GPIO3MUX		(IRQ_EP93XX_VIC0 + 22)
-#define IRQ_EP93XX_UART1RX		(IRQ_EP93XX_VIC0 + 23)
-#define IRQ_EP93XX_UART1TX		(IRQ_EP93XX_VIC0 + 24)
-#define IRQ_EP93XX_UART2RX		(IRQ_EP93XX_VIC0 + 25)
-#define IRQ_EP93XX_UART2TX		(IRQ_EP93XX_VIC0 + 26)
-#define IRQ_EP93XX_UART3RX		(IRQ_EP93XX_VIC0 + 27)
-#define IRQ_EP93XX_UART3TX		(IRQ_EP93XX_VIC0 + 28)
-#define IRQ_EP93XX_KEY			(IRQ_EP93XX_VIC0 + 29)
-#define IRQ_EP93XX_TOUCH		(IRQ_EP93XX_VIC0 + 30)
-#define EP93XX_VIC1_VALID_IRQ_MASK	0x7ffffffc
-
-#define IRQ_EP93XX_VIC1			(IRQ_EP93XX_VIC0 + 32)
-
-#define IRQ_EP93XX_EXT0			(IRQ_EP93XX_VIC1 + 0)
-#define IRQ_EP93XX_EXT1			(IRQ_EP93XX_VIC1 + 1)
-#define IRQ_EP93XX_EXT2			(IRQ_EP93XX_VIC1 + 2)
-#define IRQ_EP93XX_64HZ			(IRQ_EP93XX_VIC1 + 3)
-#define IRQ_EP93XX_WATCHDOG		(IRQ_EP93XX_VIC1 + 4)
-#define IRQ_EP93XX_RTC			(IRQ_EP93XX_VIC1 + 5)
-#define IRQ_EP93XX_IRDA			(IRQ_EP93XX_VIC1 + 6)
-#define IRQ_EP93XX_ETHERNET		(IRQ_EP93XX_VIC1 + 7)
-#define IRQ_EP93XX_EXT3			(IRQ_EP93XX_VIC1 + 8)
-#define IRQ_EP93XX_PROG			(IRQ_EP93XX_VIC1 + 9)
-#define IRQ_EP93XX_1HZ			(IRQ_EP93XX_VIC1 + 10)
-#define IRQ_EP93XX_VSYNC		(IRQ_EP93XX_VIC1 + 11)
-#define IRQ_EP93XX_VIDEO_FIFO		(IRQ_EP93XX_VIC1 + 12)
-#define IRQ_EP93XX_SSP1RX		(IRQ_EP93XX_VIC1 + 13)
-#define IRQ_EP93XX_SSP1TX		(IRQ_EP93XX_VIC1 + 14)
-#define IRQ_EP93XX_GPIO4MUX		(IRQ_EP93XX_VIC1 + 15)
-#define IRQ_EP93XX_GPIO5MUX		(IRQ_EP93XX_VIC1 + 16)
-#define IRQ_EP93XX_GPIO6MUX		(IRQ_EP93XX_VIC1 + 17)
-#define IRQ_EP93XX_GPIO7MUX		(IRQ_EP93XX_VIC1 + 18)
-#define IRQ_EP93XX_TIMER3		(IRQ_EP93XX_VIC1 + 19)
-#define IRQ_EP93XX_UART1		(IRQ_EP93XX_VIC1 + 20)
-#define IRQ_EP93XX_SSP			(IRQ_EP93XX_VIC1 + 21)
-#define IRQ_EP93XX_UART2		(IRQ_EP93XX_VIC1 + 22)
-#define IRQ_EP93XX_UART3		(IRQ_EP93XX_VIC1 + 23)
-#define IRQ_EP93XX_USB			(IRQ_EP93XX_VIC1 + 24)
-#define IRQ_EP93XX_ETHERNET_PME		(IRQ_EP93XX_VIC1 + 25)
-#define IRQ_EP93XX_DSP			(IRQ_EP93XX_VIC1 + 26)
-#define IRQ_EP93XX_GPIO_AB		(IRQ_EP93XX_VIC1 + 27)
-#define IRQ_EP93XX_SAI			(IRQ_EP93XX_VIC1 + 28)
-#define EP93XX_VIC2_VALID_IRQ_MASK	0x1fffffff
-
-#define NR_EP93XX_IRQS			(IRQ_EP93XX_VIC1 + 32 + 24)
-
-#define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
-#define EP93XX_BOARD_IRQS		32
-
-#endif
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
deleted file mode 100644
index c121c459aa17..000000000000
--- a/arch/arm/mach-ep93xx/micro9.c
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-ep93xx/micro9.c
- *
- * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
- *                    Manfred Gruber <m.gruber@tirol.com>
- * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH
- *                    Hubert Feurstein <hubert.feurstein@contec.at>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include "hardware.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-/*************************************************************************
- * Micro9 NOR Flash
- *
- * Micro9-High has up to 64MB of 32-bit flash on CS1
- * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
- * Micro9-Lite uses a separate MTD map driver for flash support
- * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
- *************************************************************************/
-static unsigned int __init micro9_detect_bootwidth(void)
-{
-	u32 v;
-
-	/* Detect the bus width of the external flash memory */
-	v = __raw_readl(EP93XX_SYSCON_SYSCFG);
-	if (v & EP93XX_SYSCON_SYSCFG_LCSN7)
-		return 4; /* 32-bit */
-	else
-		return 2; /* 16-bit */
-}
-
-static void __init micro9_register_flash(void)
-{
-	unsigned int width;
-
-	if (machine_is_micro9())
-		width = 4;
-	else if (machine_is_micro9m() || machine_is_micro9s())
-		width = micro9_detect_bootwidth();
-	else
-		width = 0;
-
-	if (width)
-		ep93xx_register_flash(width, EP93XX_CS1_PHYS_BASE, SZ_64M);
-}
-
-
-/*************************************************************************
- * Micro9 Ethernet
- *************************************************************************/
-static struct ep93xx_eth_data __initdata micro9_eth_data = {
-	.phy_id		= 0x1f,
-};
-
-
-static void __init micro9_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_eth(&micro9_eth_data, 1);
-	micro9_register_flash();
-}
-
-
-#ifdef CONFIG_MACH_MICRO9H
-MACHINE_START(MICRO9, "Contec Micro9-High")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= micro9_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MICRO9M
-MACHINE_START(MICRO9M, "Contec Micro9-Mid")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= micro9_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MICRO9L
-MACHINE_START(MICRO9L, "Contec Micro9-Lite")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= micro9_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MICRO9S
-MACHINE_START(MICRO9S, "Contec Micro9-Slim")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= micro9_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-ep93xx/platform.h b/arch/arm/mach-ep93xx/platform.h
deleted file mode 100644
index 5fb1b919133f..000000000000
--- a/arch/arm/mach-ep93xx/platform.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/platform.h
- */
-
-#ifndef __ASSEMBLY__
-
-#include <linux/platform_data/eth-ep93xx.h>
-#include <linux/reboot.h>
-
-struct device;
-struct i2c_board_info;
-struct spi_board_info;
-struct platform_device;
-struct ep93xxfb_mach_info;
-struct ep93xx_keypad_platform_data;
-struct ep93xx_spi_info;
-
-void ep93xx_map_io(void);
-void ep93xx_init_irq(void);
-
-void ep93xx_register_flash(unsigned int width,
-			   resource_size_t start, resource_size_t size);
-
-void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
-void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
-void ep93xx_register_spi(struct ep93xx_spi_info *info,
-			 struct spi_board_info *devices, int num);
-void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
-void ep93xx_register_pwm(int pwm0, int pwm1);
-void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
-void ep93xx_register_i2s(void);
-void ep93xx_register_ac97(void);
-void ep93xx_register_ide(void);
-void ep93xx_register_adc(void);
-
-struct device *ep93xx_init_devices(void);
-extern void ep93xx_timer_init(void);
-
-void ep93xx_restart(enum reboot_mode, const char *);
-
-#endif
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
deleted file mode 100644
index 569e72413561..000000000000
--- a/arch/arm/mach-ep93xx/simone.c
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/simone.c
- * Simplemachines Sim.One support.
- *
- * Copyright (C) 2010 Ryan Mallon
- *
- * Based on the 2.6.24.7 support:
- *   Copyright (C) 2009 Simplemachines
- *   MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/platform_data/video-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-
-#include "hardware.h"
-#include "gpio-ep93xx.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static struct ep93xx_eth_data __initdata simone_eth_data = {
-	.phy_id		= 1,
-};
-
-static struct ep93xxfb_mach_info __initdata simone_fb_info = {
-	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
-};
-
-static struct mmc_spi_platform_data simone_mmc_spi_data = {
-	.detect_delay	= 500,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table simone_mmc_spi_gpio_table = {
-	.dev_id = "mmc_spi.0", /* "mmc_spi" @ CS0 */
-	.table = {
-		/* Card detect */
-		GPIO_LOOKUP_IDX("A", 0, NULL, 0, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct spi_board_info simone_spi_devices[] __initdata = {
-	{
-		.modalias		= "mmc_spi",
-		.platform_data		= &simone_mmc_spi_data,
-		/*
-		 * We use 10 MHz even though the maximum is 3.7 MHz. The driver
-		 * will limit it automatically to max. frequency.
-		 */
-		.max_speed_hz		= 10 * 1000 * 1000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-		.mode			= SPI_MODE_3,
-	},
-};
-
-/*
- * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes
- * low between multi-message command blocks. From v1.4, it uses a GPIO instead.
- * v1.3 parts will still work, since the signal on SFRMOUT is automatic.
- */
-static struct gpiod_lookup_table simone_spi_cs_gpio_table = {
-	.dev_id = "spi0",
-	.table = {
-		GPIO_LOOKUP("A", 1, "cs", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct ep93xx_spi_info simone_spi_info __initdata = {
-	.use_dma = 1,
-};
-
-static struct i2c_board_info __initdata simone_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68),
-	},
-};
-
-static struct platform_device simone_audio_device = {
-	.name		= "simone-audio",
-	.id		= -1,
-};
-
-static void __init simone_register_audio(void)
-{
-	ep93xx_register_ac97();
-	platform_device_register(&simone_audio_device);
-}
-
-static void __init simone_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
-	ep93xx_register_eth(&simone_eth_data, 1);
-	ep93xx_register_fb(&simone_fb_info);
-	ep93xx_register_i2c(simone_i2c_board_info,
-			    ARRAY_SIZE(simone_i2c_board_info));
-	gpiod_add_lookup_table(&simone_mmc_spi_gpio_table);
-	gpiod_add_lookup_table(&simone_spi_cs_gpio_table);
-	ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
-			    ARRAY_SIZE(simone_spi_devices));
-	simone_register_audio();
-}
-
-MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
-	/* Maintainer: Ryan Mallon */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= simone_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
deleted file mode 100644
index 1dfb725671b1..000000000000
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/snappercl15.c
- * Bluewater Systems Snapper CL15 system module
- *
- * Copyright (C) 2009 Bluewater Systems Ltd
- * Author: Ryan Mallon
- *
- * NAND code adapted from driver by:
- *   Andre Renaud <andre@bluewatersys.com>
- *   James R. McKaskill
- */
-
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-
-#include <linux/mtd/platnand.h>
-
-#include "hardware.h"
-#include <linux/platform_data/video-ep93xx.h>
-#include "gpio-ep93xx.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-#define SNAPPERCL15_NAND_BASE	(EP93XX_CS7_PHYS_BASE + SZ_16M)
-
-#define SNAPPERCL15_NAND_WPN	(1 << 8)  /* Write protect (active low) */
-#define SNAPPERCL15_NAND_ALE	(1 << 9)  /* Address latch */
-#define SNAPPERCL15_NAND_CLE	(1 << 10) /* Command latch */
-#define SNAPPERCL15_NAND_CEN	(1 << 11) /* Chip enable (active low) */
-#define SNAPPERCL15_NAND_RDY	(1 << 14) /* Device ready */
-
-#define NAND_CTRL_ADDR(chip) 	(chip->legacy.IO_ADDR_W + 0x40)
-
-static void snappercl15_nand_cmd_ctrl(struct nand_chip *chip, int cmd,
-				      unsigned int ctrl)
-{
-	static u16 nand_state = SNAPPERCL15_NAND_WPN;
-	u16 set;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		set = SNAPPERCL15_NAND_CEN | SNAPPERCL15_NAND_WPN;
-
-		if (ctrl & NAND_NCE)
-			set &= ~SNAPPERCL15_NAND_CEN;
-		if (ctrl & NAND_CLE)
-			set |= SNAPPERCL15_NAND_CLE;
-		if (ctrl & NAND_ALE)
-			set |= SNAPPERCL15_NAND_ALE;
-
-		nand_state &= ~(SNAPPERCL15_NAND_CEN |
-				SNAPPERCL15_NAND_CLE |
-				SNAPPERCL15_NAND_ALE);
-		nand_state |= set;
-		__raw_writew(nand_state, NAND_CTRL_ADDR(chip));
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		__raw_writew((cmd & 0xff) | nand_state,
-			     chip->legacy.IO_ADDR_W);
-}
-
-static int snappercl15_nand_dev_ready(struct nand_chip *chip)
-{
-	return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY);
-}
-
-static struct mtd_partition snappercl15_nand_parts[] = {
-	{
-		.name		= "Kernel",
-		.offset		= 0,
-		.size		= SZ_2M,
-	},
-	{
-		.name		= "Filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct platform_nand_data snappercl15_nand_data = {
-	.chip = {
-		.nr_chips		= 1,
-		.partitions		= snappercl15_nand_parts,
-		.nr_partitions		= ARRAY_SIZE(snappercl15_nand_parts),
-		.chip_delay		= 25,
-	},
-	.ctrl = {
-		.dev_ready		= snappercl15_nand_dev_ready,
-		.cmd_ctrl		= snappercl15_nand_cmd_ctrl,
-	},
-};
-
-static struct resource snappercl15_nand_resource[] = {
-	{
-		.start		= SNAPPERCL15_NAND_BASE,
-		.end		= SNAPPERCL15_NAND_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device snappercl15_nand_device = {
-	.name			= "gen_nand",
-	.id			= -1,
-	.dev.platform_data	= &snappercl15_nand_data,
-	.resource		= snappercl15_nand_resource,
-	.num_resources		= ARRAY_SIZE(snappercl15_nand_resource),
-};
-
-static struct ep93xx_eth_data __initdata snappercl15_eth_data = {
-	.phy_id			= 1,
-};
-
-static struct i2c_board_info __initdata snappercl15_i2c_data[] = {
-	{
-		/* Audio codec */
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = {
-};
-
-static struct platform_device snappercl15_audio_device = {
-	.name		= "snappercl15-audio",
-	.id		= -1,
-};
-
-static void __init snappercl15_register_audio(void)
-{
-	ep93xx_register_i2s();
-	platform_device_register(&snappercl15_audio_device);
-}
-
-static void __init snappercl15_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_eth(&snappercl15_eth_data, 1);
-	ep93xx_register_i2c(snappercl15_i2c_data,
-			    ARRAY_SIZE(snappercl15_i2c_data));
-	ep93xx_register_fb(&snappercl15_fb_info);
-	snappercl15_register_audio();
-	platform_device_register(&snappercl15_nand_device);
-}
-
-MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
-	/* Maintainer: Ryan Mallon */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= snappercl15_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h
deleted file mode 100644
index 3245ebbd5069..000000000000
--- a/arch/arm/mach-ep93xx/soc.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-ep93xx/soc.h
- *
- * Copyright (C) 2012 Open Kernel Labs <www.ok-labs.com>
- * Copyright (C) 2012 Ryan Mallon <rmallon@gmail.com>
- */
-
-#ifndef _EP93XX_SOC_H
-#define _EP93XX_SOC_H
-
-#include "ep93xx-regs.h"
-#include "irqs.h"
-
-/*
- * EP93xx Physical Memory Map:
- *
- * The ASDO pin is sampled at system reset to select a synchronous or
- * asynchronous boot configuration.  When ASDO is "1" (i.e. pulled-up)
- * the synchronous boot mode is selected.  When ASDO is "0" (i.e
- * pulled-down) the asynchronous boot mode is selected.
- *
- * In synchronous boot mode nSDCE3 is decoded starting at physical address
- * 0x00000000 and nCS0 is decoded starting at 0xf0000000.  For asynchronous
- * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3
- * decoded at 0xf0000000.
- *
- * There is known errata for the EP93xx dealing with External Memory
- * Configurations.  Please refer to "AN273: EP93xx Silicon Rev E Design
- * Guidelines" for more information.  This document can be found at:
- *
- *	http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
- */
-
-#define EP93XX_CS0_PHYS_BASE_ASYNC	0x00000000	/* ASDO Pin = 0 */
-#define EP93XX_SDCE3_PHYS_BASE_SYNC	0x00000000	/* ASDO Pin = 1 */
-#define EP93XX_CS1_PHYS_BASE		0x10000000
-#define EP93XX_CS2_PHYS_BASE		0x20000000
-#define EP93XX_CS3_PHYS_BASE		0x30000000
-#define EP93XX_PCMCIA_PHYS_BASE		0x40000000
-#define EP93XX_CS6_PHYS_BASE		0x60000000
-#define EP93XX_CS7_PHYS_BASE		0x70000000
-#define EP93XX_SDCE0_PHYS_BASE		0xc0000000
-#define EP93XX_SDCE1_PHYS_BASE		0xd0000000
-#define EP93XX_SDCE2_PHYS_BASE		0xe0000000
-#define EP93XX_SDCE3_PHYS_BASE_ASYNC	0xf0000000	/* ASDO Pin = 0 */
-#define EP93XX_CS0_PHYS_BASE_SYNC	0xf0000000	/* ASDO Pin = 1 */
-
-/* AHB peripherals */
-#define EP93XX_DMA_BASE			EP93XX_AHB_IOMEM(0x00000000)
-
-#define EP93XX_ETHERNET_PHYS_BASE	EP93XX_AHB_PHYS(0x00010000)
-#define EP93XX_ETHERNET_BASE		EP93XX_AHB_IOMEM(0x00010000)
-
-#define EP93XX_USB_PHYS_BASE		EP93XX_AHB_PHYS(0x00020000)
-#define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
-
-#define EP93XX_RASTER_PHYS_BASE		EP93XX_AHB_PHYS(0x00030000)
-#define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
-
-#define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
-
-#define EP93XX_SDRAM_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00060000)
-
-#define EP93XX_PCMCIA_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00080000)
-
-#define EP93XX_BOOT_ROM_BASE		EP93XX_AHB_IOMEM(0x00090000)
-
-#define EP93XX_IDE_PHYS_BASE		EP93XX_AHB_PHYS(0x000a0000)
-#define EP93XX_IDE_BASE			EP93XX_AHB_IOMEM(0x000a0000)
-
-#define EP93XX_VIC1_BASE		EP93XX_AHB_IOMEM(0x000b0000)
-
-#define EP93XX_VIC2_BASE		EP93XX_AHB_IOMEM(0x000c0000)
-
-/* APB peripherals */
-#define EP93XX_TIMER_BASE		EP93XX_APB_IOMEM(0x00010000)
-
-#define EP93XX_I2S_PHYS_BASE		EP93XX_APB_PHYS(0x00020000)
-#define EP93XX_I2S_BASE			EP93XX_APB_IOMEM(0x00020000)
-
-#define EP93XX_SECURITY_BASE		EP93XX_APB_IOMEM(0x00030000)
-
-#define EP93XX_AAC_PHYS_BASE		EP93XX_APB_PHYS(0x00080000)
-#define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
-
-#define EP93XX_SPI_PHYS_BASE		EP93XX_APB_PHYS(0x000a0000)
-#define EP93XX_SPI_BASE			EP93XX_APB_IOMEM(0x000a0000)
-
-#define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)
-
-#define EP93XX_KEY_MATRIX_PHYS_BASE	EP93XX_APB_PHYS(0x000f0000)
-#define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
-
-#define EP93XX_ADC_PHYS_BASE		EP93XX_APB_PHYS(0x00100000)
-#define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
-#define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
-
-#define EP93XX_PWM_PHYS_BASE		EP93XX_APB_PHYS(0x00110000)
-#define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
-
-#define EP93XX_RTC_PHYS_BASE		EP93XX_APB_PHYS(0x00120000)
-#define EP93XX_RTC_BASE			EP93XX_APB_IOMEM(0x00120000)
-
-#define EP93XX_WATCHDOG_PHYS_BASE	EP93XX_APB_PHYS(0x00140000)
-#define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
-
-/* System controller */
-#define EP93XX_SYSCON_BASE		EP93XX_APB_IOMEM(0x00130000)
-#define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
-#define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
-#define EP93XX_SYSCON_PWRCNT		EP93XX_SYSCON_REG(0x04)
-#define EP93XX_SYSCON_PWRCNT_FIR_EN	(1<<31)
-#define EP93XX_SYSCON_PWRCNT_UARTBAUD	(1<<29)
-#define EP93XX_SYSCON_PWRCNT_USH_EN	28
-#define EP93XX_SYSCON_PWRCNT_DMA_M2M1	27
-#define EP93XX_SYSCON_PWRCNT_DMA_M2M0	26
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P8	25
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P9	24
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P6	23
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P7	22
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P4	21
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P5	20
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P2	19
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P3	18
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P0	17
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P1	16
-#define EP93XX_SYSCON_HALT		EP93XX_SYSCON_REG(0x08)
-#define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
-#define EP93XX_SYSCON_CLKSET1		EP93XX_SYSCON_REG(0x20)
-#define EP93XX_SYSCON_CLKSET1_NBYP1	(1<<23)
-#define EP93XX_SYSCON_CLKSET2		EP93XX_SYSCON_REG(0x24)
-#define EP93XX_SYSCON_CLKSET2_NBYP2	(1<<19)
-#define EP93XX_SYSCON_CLKSET2_PLL2_EN	(1<<18)
-#define EP93XX_SYSCON_DEVCFG		EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVCFG_SWRST	(1<<31)
-#define EP93XX_SYSCON_DEVCFG_D1ONG	(1<<30)
-#define EP93XX_SYSCON_DEVCFG_D0ONG	(1<<29)
-#define EP93XX_SYSCON_DEVCFG_IONU2	(1<<28)
-#define EP93XX_SYSCON_DEVCFG_GONK	(1<<27)
-#define EP93XX_SYSCON_DEVCFG_TONG	(1<<26)
-#define EP93XX_SYSCON_DEVCFG_MONG	(1<<25)
-#define EP93XX_SYSCON_DEVCFG_U3EN	24
-#define EP93XX_SYSCON_DEVCFG_CPENA	(1<<23)
-#define EP93XX_SYSCON_DEVCFG_A2ONG	(1<<22)
-#define EP93XX_SYSCON_DEVCFG_A1ONG	(1<<21)
-#define EP93XX_SYSCON_DEVCFG_U2EN	20
-#define EP93XX_SYSCON_DEVCFG_EXVC	(1<<19)
-#define EP93XX_SYSCON_DEVCFG_U1EN	18
-#define EP93XX_SYSCON_DEVCFG_TIN	(1<<17)
-#define EP93XX_SYSCON_DEVCFG_HC3IN	(1<<15)
-#define EP93XX_SYSCON_DEVCFG_HC3EN	(1<<14)
-#define EP93XX_SYSCON_DEVCFG_HC1IN	(1<<13)
-#define EP93XX_SYSCON_DEVCFG_HC1EN	(1<<12)
-#define EP93XX_SYSCON_DEVCFG_HONIDE	(1<<11)
-#define EP93XX_SYSCON_DEVCFG_GONIDE	(1<<10)
-#define EP93XX_SYSCON_DEVCFG_PONG	(1<<9)
-#define EP93XX_SYSCON_DEVCFG_EONIDE	(1<<8)
-#define EP93XX_SYSCON_DEVCFG_I2SONSSP	(1<<7)
-#define EP93XX_SYSCON_DEVCFG_I2SONAC97	(1<<6)
-#define EP93XX_SYSCON_DEVCFG_RASONP3	(1<<4)
-#define EP93XX_SYSCON_DEVCFG_RAS	(1<<3)
-#define EP93XX_SYSCON_DEVCFG_ADCPD	(1<<2)
-#define EP93XX_SYSCON_DEVCFG_KEYS	(1<<1)
-#define EP93XX_SYSCON_DEVCFG_SHENA	(1<<0)
-#define EP93XX_SYSCON_VIDCLKDIV		EP93XX_SYSCON_REG(0x84)
-#define EP93XX_SYSCON_CLKDIV_ENABLE	15
-#define EP93XX_SYSCON_CLKDIV_ESEL	(1<<14)
-#define EP93XX_SYSCON_CLKDIV_PSEL	(1<<13)
-#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT	8
-#define EP93XX_SYSCON_I2SCLKDIV		EP93XX_SYSCON_REG(0x8c)
-#define EP93XX_SYSCON_I2SCLKDIV_SENA	31
-#define EP93XX_SYSCON_I2SCLKDIV_ORIDE   (1<<29)
-#define EP93XX_SYSCON_I2SCLKDIV_SPOL	(1<<19)
-#define EP93XX_I2SCLKDIV_SDIV		(1 << 16)
-#define EP93XX_I2SCLKDIV_LRDIV32	(0 << 17)
-#define EP93XX_I2SCLKDIV_LRDIV64	(1 << 17)
-#define EP93XX_I2SCLKDIV_LRDIV128	(2 << 17)
-#define EP93XX_I2SCLKDIV_LRDIV_MASK	(3 << 17)
-#define EP93XX_SYSCON_KEYTCHCLKDIV	EP93XX_SYSCON_REG(0x90)
-#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN	31
-#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	16
-#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN	15
-#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV	(1<<0)
-#define EP93XX_SYSCON_SYSCFG		EP93XX_SYSCON_REG(0x9c)
-#define EP93XX_SYSCON_SYSCFG_REV_MASK	(0xf0000000)
-#define EP93XX_SYSCON_SYSCFG_REV_SHIFT	(28)
-#define EP93XX_SYSCON_SYSCFG_SBOOT	(1<<8)
-#define EP93XX_SYSCON_SYSCFG_LCSN7	(1<<7)
-#define EP93XX_SYSCON_SYSCFG_LCSN6	(1<<6)
-#define EP93XX_SYSCON_SYSCFG_LASDO	(1<<5)
-#define EP93XX_SYSCON_SYSCFG_LEEDA	(1<<4)
-#define EP93XX_SYSCON_SYSCFG_LEECLK	(1<<3)
-#define EP93XX_SYSCON_SYSCFG_LCSN2	(1<<1)
-#define EP93XX_SYSCON_SYSCFG_LCSN1	(1<<0)
-#define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
-
-/* EP93xx System Controller software locked register write */
-void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
-void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
-
-static inline void ep93xx_devcfg_set_bits(unsigned int bits)
-{
-	ep93xx_devcfg_set_clear(bits, 0x00);
-}
-
-static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
-{
-	ep93xx_devcfg_set_clear(0x00, bits);
-}
-
-#endif /* _EP93XX_SOC_H */
diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c
deleted file mode 100644
index dd4b164d1831..000000000000
--- a/arch/arm/mach-ep93xx/timer-ep93xx.c
+++ /dev/null
@@ -1,142 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/sched_clock.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/mach/time.h>
-#include "soc.h"
-
-/*************************************************************************
- * Timer handling for EP93xx
- *************************************************************************
- * The ep93xx has four internal timers.  Timers 1, 2 (both 16 bit) and
- * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
- * an interrupt on underflow.  Timer 4 (40 bit) counts down at 983.04 kHz,
- * is free-running, and can't generate interrupts.
- *
- * The 508 kHz timers are ideal for use for the timer interrupt, as the
- * most common values of HZ divide 508 kHz nicely.  We pick the 32 bit
- * timer (timer 3) to get as long sleep intervals as possible when using
- * CONFIG_NO_HZ.
- *
- * The higher clock rate of timer 4 makes it a better choice than the
- * other timers for use as clock source and for sched_clock(), providing
- * a stable 40 bit time base.
- *************************************************************************
- */
-#define EP93XX_TIMER_REG(x)		(EP93XX_TIMER_BASE + (x))
-#define EP93XX_TIMER1_LOAD		EP93XX_TIMER_REG(0x00)
-#define EP93XX_TIMER1_VALUE		EP93XX_TIMER_REG(0x04)
-#define EP93XX_TIMER1_CONTROL		EP93XX_TIMER_REG(0x08)
-#define EP93XX_TIMER123_CONTROL_ENABLE	(1 << 7)
-#define EP93XX_TIMER123_CONTROL_MODE	(1 << 6)
-#define EP93XX_TIMER123_CONTROL_CLKSEL	(1 << 3)
-#define EP93XX_TIMER1_CLEAR		EP93XX_TIMER_REG(0x0c)
-#define EP93XX_TIMER2_LOAD		EP93XX_TIMER_REG(0x20)
-#define EP93XX_TIMER2_VALUE		EP93XX_TIMER_REG(0x24)
-#define EP93XX_TIMER2_CONTROL		EP93XX_TIMER_REG(0x28)
-#define EP93XX_TIMER2_CLEAR		EP93XX_TIMER_REG(0x2c)
-#define EP93XX_TIMER4_VALUE_LOW		EP93XX_TIMER_REG(0x60)
-#define EP93XX_TIMER4_VALUE_HIGH	EP93XX_TIMER_REG(0x64)
-#define EP93XX_TIMER4_VALUE_HIGH_ENABLE	(1 << 8)
-#define EP93XX_TIMER3_LOAD		EP93XX_TIMER_REG(0x80)
-#define EP93XX_TIMER3_VALUE		EP93XX_TIMER_REG(0x84)
-#define EP93XX_TIMER3_CONTROL		EP93XX_TIMER_REG(0x88)
-#define EP93XX_TIMER3_CLEAR		EP93XX_TIMER_REG(0x8c)
-
-#define EP93XX_TIMER123_RATE		508469
-#define EP93XX_TIMER4_RATE		983040
-
-static u64 notrace ep93xx_read_sched_clock(void)
-{
-	u64 ret;
-
-	ret = readl(EP93XX_TIMER4_VALUE_LOW);
-	ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32);
-	return ret;
-}
-
-u64 ep93xx_clocksource_read(struct clocksource *c)
-{
-	u64 ret;
-
-	ret = readl(EP93XX_TIMER4_VALUE_LOW);
-	ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32);
-	return (u64) ret;
-}
-
-static int ep93xx_clkevt_set_next_event(unsigned long next,
-					struct clock_event_device *evt)
-{
-	/* Default mode: periodic, off, 508 kHz */
-	u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
-		    EP93XX_TIMER123_CONTROL_CLKSEL;
-
-	/* Clear timer */
-	writel(tmode, EP93XX_TIMER3_CONTROL);
-
-	/* Set next event */
-	writel(next, EP93XX_TIMER3_LOAD);
-	writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
-	       EP93XX_TIMER3_CONTROL);
-        return 0;
-}
-
-
-static int ep93xx_clkevt_shutdown(struct clock_event_device *evt)
-{
-	/* Disable timer */
-	writel(0, EP93XX_TIMER3_CONTROL);
-
-	return 0;
-}
-
-static struct clock_event_device ep93xx_clockevent = {
-	.name			= "timer1",
-	.features		= CLOCK_EVT_FEAT_ONESHOT,
-	.set_state_shutdown	= ep93xx_clkevt_shutdown,
-	.set_state_oneshot	= ep93xx_clkevt_shutdown,
-	.tick_resume		= ep93xx_clkevt_shutdown,
-	.set_next_event		= ep93xx_clkevt_set_next_event,
-	.rating			= 300,
-};
-
-static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	/* Writing any value clears the timer interrupt */
-	writel(1, EP93XX_TIMER3_CLEAR);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-void __init ep93xx_timer_init(void)
-{
-	int irq = IRQ_EP93XX_TIMER3;
-	unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL;
-
-	/* Enable and register clocksource and sched_clock on timer 4 */
-	writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
-	       EP93XX_TIMER4_VALUE_HIGH);
-	clocksource_mmio_init(NULL, "timer4",
-			      EP93XX_TIMER4_RATE, 200, 40,
-			      ep93xx_clocksource_read);
-	sched_clock_register(ep93xx_read_sched_clock, 40,
-			     EP93XX_TIMER4_RATE);
-
-	/* Set up clockevent on timer 3 */
-	if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer",
-			&ep93xx_clockevent))
-		pr_err("Failed to request irq %d (ep93xx timer)\n", irq);
-	clockevents_config_and_register(&ep93xx_clockevent,
-					EP93XX_TIMER123_RATE,
-					1,
-					0xffffffffU);
-}
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
deleted file mode 100644
index d3de7283ecb3..000000000000
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ /dev/null
@@ -1,422 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/ts72xx.c
- * Technologic Systems TS72xx SBC support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mtd/platnand.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include <linux/gpio/machine.h>
-
-#include "gpio-ep93xx.h"
-#include "hardware.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-#include "ts72xx.h"
-
-/*************************************************************************
- * IO map
- *************************************************************************/
-static struct map_desc ts72xx_io_desc[] __initdata = {
-	{
-		.virtual	= (unsigned long)TS72XX_MODEL_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_MODEL_PHYS_BASE),
-		.length		= TS72XX_MODEL_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)TS72XX_OPTIONS_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE),
-		.length		= TS72XX_OPTIONS_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)TS72XX_OPTIONS2_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE),
-		.length		= TS72XX_OPTIONS2_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)TS72XX_CPLDVER_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_CPLDVER_PHYS_BASE),
-		.length		= TS72XX_CPLDVER_SIZE,
-		.type		= MT_DEVICE,
-	}
-};
-
-static void __init ts72xx_map_io(void)
-{
-	ep93xx_map_io();
-	iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc));
-}
-
-
-/*************************************************************************
- * NAND flash
- *************************************************************************/
-#define TS72XX_NAND_CONTROL_ADDR_LINE	22	/* 0xN0400000 */
-#define TS72XX_NAND_BUSY_ADDR_LINE	23	/* 0xN0800000 */
-
-static void ts72xx_nand_hwcontrol(struct nand_chip *chip,
-				  int cmd, unsigned int ctrl)
-{
-	if (ctrl & NAND_CTRL_CHANGE) {
-		void __iomem *addr = chip->legacy.IO_ADDR_R;
-		unsigned char bits;
-
-		addr += (1 << TS72XX_NAND_CONTROL_ADDR_LINE);
-
-		bits = __raw_readb(addr) & ~0x07;
-		bits |= (ctrl & NAND_NCE) << 2;	/* bit 0 -> bit 2 */
-		bits |= (ctrl & NAND_CLE);	/* bit 1 -> bit 1 */
-		bits |= (ctrl & NAND_ALE) >> 2;	/* bit 2 -> bit 0 */
-
-		__raw_writeb(bits, addr);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		__raw_writeb(cmd, chip->legacy.IO_ADDR_W);
-}
-
-static int ts72xx_nand_device_ready(struct nand_chip *chip)
-{
-	void __iomem *addr = chip->legacy.IO_ADDR_R;
-
-	addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE);
-
-	return !!(__raw_readb(addr) & 0x20);
-}
-
-#define TS72XX_BOOTROM_PART_SIZE	(SZ_16K)
-#define TS72XX_REDBOOT_PART_SIZE	(SZ_2M + SZ_1M)
-
-static struct mtd_partition ts72xx_nand_parts[] = {
-	{
-		.name		= "TS-BOOTROM",
-		.offset		= 0,
-		.size		= TS72XX_BOOTROM_PART_SIZE,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	}, {
-		.name		= "Linux",
-		.offset		= MTDPART_OFS_RETAIN,
-		.size		= TS72XX_REDBOOT_PART_SIZE,
-				/* leave so much for last partition */
-	}, {
-		.name		= "RedBoot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-};
-
-static struct platform_nand_data ts72xx_nand_data = {
-	.chip = {
-		.nr_chips	= 1,
-		.chip_offset	= 0,
-		.chip_delay	= 15,
-	},
-	.ctrl = {
-		.cmd_ctrl	= ts72xx_nand_hwcontrol,
-		.dev_ready	= ts72xx_nand_device_ready,
-	},
-};
-
-static struct resource ts72xx_nand_resource[] = {
-	{
-		.start		= 0,			/* filled in later */
-		.end		= 0,			/* filled in later */
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ts72xx_nand_flash = {
-	.name			= "gen_nand",
-	.id			= -1,
-	.dev.platform_data	= &ts72xx_nand_data,
-	.resource		= ts72xx_nand_resource,
-	.num_resources		= ARRAY_SIZE(ts72xx_nand_resource),
-};
-
-static void __init ts72xx_register_flash(struct mtd_partition *parts, int n,
-				  resource_size_t start)
-{
-	/*
-	 * TS7200 has NOR flash all other TS72xx board have NAND flash.
-	 */
-	if (board_is_ts7200()) {
-		ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
-	} else {
-		ts72xx_nand_resource[0].start = start;
-		ts72xx_nand_resource[0].end = start + SZ_16M - 1;
-
-		ts72xx_nand_data.chip.partitions = parts;
-		ts72xx_nand_data.chip.nr_partitions = n;
-
-		platform_device_register(&ts72xx_nand_flash);
-	}
-}
-
-/*************************************************************************
- * RTC M48T86
- *************************************************************************/
-#define TS72XX_RTC_INDEX_PHYS_BASE	(EP93XX_CS1_PHYS_BASE + 0x00800000)
-#define TS72XX_RTC_DATA_PHYS_BASE	(EP93XX_CS1_PHYS_BASE + 0x01700000)
-
-static struct resource ts72xx_rtc_resources[] = {
-	DEFINE_RES_MEM(TS72XX_RTC_INDEX_PHYS_BASE, 0x01),
-	DEFINE_RES_MEM(TS72XX_RTC_DATA_PHYS_BASE, 0x01),
-};
-
-static struct platform_device ts72xx_rtc_device = {
-	.name		= "rtc-m48t86",
-	.id		= -1,
-	.resource	= ts72xx_rtc_resources,
-	.num_resources 	= ARRAY_SIZE(ts72xx_rtc_resources),
-};
-
-/*************************************************************************
- * Watchdog (in CPLD)
- *************************************************************************/
-#define TS72XX_WDT_CONTROL_PHYS_BASE	(EP93XX_CS2_PHYS_BASE + 0x03800000)
-#define TS72XX_WDT_FEED_PHYS_BASE	(EP93XX_CS2_PHYS_BASE + 0x03c00000)
-
-static struct resource ts72xx_wdt_resources[] = {
-	DEFINE_RES_MEM(TS72XX_WDT_CONTROL_PHYS_BASE, 0x01),
-	DEFINE_RES_MEM(TS72XX_WDT_FEED_PHYS_BASE, 0x01),
-};
-
-static struct platform_device ts72xx_wdt_device = {
-	.name		= "ts72xx-wdt",
-	.id		= -1,
-	.resource	= ts72xx_wdt_resources,
-	.num_resources	= ARRAY_SIZE(ts72xx_wdt_resources),
-};
-
-/*************************************************************************
- * ETH
- *************************************************************************/
-static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
-	.phy_id		= 1,
-};
-
-/*************************************************************************
- * SPI SD/MMC host
- *************************************************************************/
-#define BK3_EN_SDCARD_PHYS_BASE         0x12400000
-#define BK3_EN_SDCARD_PWR 0x0
-#define BK3_DIS_SDCARD_PWR 0x0C
-static void bk3_mmc_spi_setpower(struct device *dev, unsigned int vdd)
-{
-	void __iomem *pwr_sd = ioremap(BK3_EN_SDCARD_PHYS_BASE, SZ_4K);
-
-	if (!pwr_sd) {
-		pr_err("Failed to enable SD card power!");
-		return;
-	}
-
-	pr_debug("%s: SD card pwr %s VDD:0x%x\n", __func__,
-		 !!vdd ? "ON" : "OFF", vdd);
-
-	if (!!vdd)
-		__raw_writeb(BK3_EN_SDCARD_PWR, pwr_sd);
-	else
-		__raw_writeb(BK3_DIS_SDCARD_PWR, pwr_sd);
-
-	iounmap(pwr_sd);
-}
-
-static struct mmc_spi_platform_data bk3_spi_mmc_data = {
-	.detect_delay	= 500,
-	.powerup_msecs	= 100,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.caps		= MMC_CAP_NONREMOVABLE,
-	.setpower       = bk3_mmc_spi_setpower,
-};
-
-/*************************************************************************
- * SPI Bus - SD card access
- *************************************************************************/
-static struct spi_board_info bk3_spi_board_info[] __initdata = {
-	{
-		.modalias		= "mmc_spi",
-		.platform_data		= &bk3_spi_mmc_data,
-		.max_speed_hz		= 7.4E6,
-		.bus_num		= 0,
-		.chip_select		= 0,
-		.mode			= SPI_MODE_0,
-	},
-};
-
-/*
- * This is a stub -> the FGPIO[3] pin is not connected on the schematic
- * The all work is performed automatically by !SPI_FRAME (SFRM1) and
- * goes through CPLD
- */
-static struct gpiod_lookup_table bk3_spi_cs_gpio_table = {
-	.dev_id = "spi0",
-	.table = {
-		GPIO_LOOKUP("F", 3, "cs", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct ep93xx_spi_info bk3_spi_master __initdata = {
-	.use_dma	= 1,
-};
-
-/*************************************************************************
- * TS72XX support code
- *************************************************************************/
-#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX)
-
-/* Relative to EP93XX_CS1_PHYS_BASE */
-#define TS73XX_FPGA_LOADER_BASE		0x03c00000
-
-static struct resource ts73xx_fpga_resources[] = {
-	{
-		.start	= EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE,
-		.end	= EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE + 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ts73xx_fpga_device = {
-	.name	= "ts73xx-fpga-mgr",
-	.id	= -1,
-	.resource = ts73xx_fpga_resources,
-	.num_resources = ARRAY_SIZE(ts73xx_fpga_resources),
-};
-
-#endif
-
-/*************************************************************************
- * SPI Bus
- *************************************************************************/
-static struct spi_board_info ts72xx_spi_devices[] __initdata = {
-	{
-		.modalias		= "tmp122",
-		.max_speed_hz		= 2 * 1000 * 1000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-	},
-};
-
-static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = {
-	.dev_id = "spi0",
-	.table = {
-		/* DIO_17 */
-		GPIO_LOOKUP("F", 2, "cs", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct ep93xx_spi_info ts72xx_spi_info __initdata = {
-	/* Intentionally left blank */
-};
-
-static void __init ts72xx_init_machine(void)
-{
-	ep93xx_init_devices();
-	ts72xx_register_flash(ts72xx_nand_parts, ARRAY_SIZE(ts72xx_nand_parts),
-			      is_ts9420_installed() ?
-			      EP93XX_CS7_PHYS_BASE : EP93XX_CS6_PHYS_BASE);
-	platform_device_register(&ts72xx_rtc_device);
-	platform_device_register(&ts72xx_wdt_device);
-
-	ep93xx_register_eth(&ts72xx_eth_data, 1);
-#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX)
-	if (board_is_ts7300())
-		platform_device_register(&ts73xx_fpga_device);
-#endif
-	gpiod_add_lookup_table(&ts72xx_spi_cs_gpio_table);
-	ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices,
-			    ARRAY_SIZE(ts72xx_spi_devices));
-}
-
-MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ts72xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= ts72xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-
-/*************************************************************************
- * EP93xx I2S audio peripheral handling
- *************************************************************************/
-static struct resource ep93xx_i2s_resource[] = {
-	DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100),
-	DEFINE_RES_IRQ_NAMED(IRQ_EP93XX_SAI, "spilink i2s slave"),
-};
-
-static struct platform_device ep93xx_i2s_device = {
-	.name		= "ep93xx-spilink-i2s",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_i2s_resource),
-	.resource	= ep93xx_i2s_resource,
-};
-
-/*************************************************************************
- * BK3 support code
- *************************************************************************/
-static struct mtd_partition bk3_nand_parts[] = {
-	{
-		.name		= "System",
-		.offset	= 0x00000000,
-		.size		= 0x01e00000,
-	}, {
-		.name		= "Data",
-		.offset	= 0x01e00000,
-		.size		= 0x05f20000
-	}, {
-		.name		= "RedBoot",
-		.offset	= 0x07d20000,
-		.size		= 0x002e0000,
-		.mask_flags	= MTD_WRITEABLE,	/* force RO */
-	},
-};
-
-static void __init bk3_init_machine(void)
-{
-	ep93xx_init_devices();
-
-	ts72xx_register_flash(bk3_nand_parts, ARRAY_SIZE(bk3_nand_parts),
-			      EP93XX_CS6_PHYS_BASE);
-
-	ep93xx_register_eth(&ts72xx_eth_data, 1);
-
-	gpiod_add_lookup_table(&bk3_spi_cs_gpio_table);
-	ep93xx_register_spi(&bk3_spi_master, bk3_spi_board_info,
-			    ARRAY_SIZE(bk3_spi_board_info));
-
-	/* Configure ep93xx's I2S to use AC97 pins */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97);
-	platform_device_register(&ep93xx_i2s_device);
-}
-
-MACHINE_START(BK3, "Liebherr controller BK3.1")
-	/* Maintainer: Lukasz Majewski <lukma@denx.de> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ts72xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= bk3_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/ts72xx.h b/arch/arm/mach-ep93xx/ts72xx.h
deleted file mode 100644
index 00b4941d29c9..000000000000
--- a/arch/arm/mach-ep93xx/ts72xx.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/ts72xx.h
- */
-
-/*
- * TS72xx memory map:
- *
- * virt		phys		size
- * febff000	22000000	4K	model number register (bits 0-2)
- * febfe000	22400000	4K	options register
- * febfd000	22800000	4K	options register #2
- * febfc000     23400000        4K      CPLD version register
- */
-
-#ifndef __TS72XX_H_
-#define __TS72XX_H_
-
-#define TS72XX_MODEL_PHYS_BASE		0x22000000
-#define TS72XX_MODEL_VIRT_BASE		IOMEM(0xfebff000)
-#define TS72XX_MODEL_SIZE		0x00001000
-
-#define TS72XX_MODEL_TS7200		0x00
-#define TS72XX_MODEL_TS7250		0x01
-#define TS72XX_MODEL_TS7260		0x02
-#define TS72XX_MODEL_TS7300		0x03
-#define TS72XX_MODEL_TS7400		0x04
-#define TS72XX_MODEL_MASK		0x07
-
-
-#define TS72XX_OPTIONS_PHYS_BASE	0x22400000
-#define TS72XX_OPTIONS_VIRT_BASE	IOMEM(0xfebfe000)
-#define TS72XX_OPTIONS_SIZE		0x00001000
-
-#define TS72XX_OPTIONS_COM2_RS485	0x02
-#define TS72XX_OPTIONS_MAX197		0x01
-
-
-#define TS72XX_OPTIONS2_PHYS_BASE	0x22800000
-#define TS72XX_OPTIONS2_VIRT_BASE	IOMEM(0xfebfd000)
-#define TS72XX_OPTIONS2_SIZE		0x00001000
-
-#define TS72XX_OPTIONS2_TS9420		0x04
-#define TS72XX_OPTIONS2_TS9420_BOOT	0x02
-
-#define TS72XX_CPLDVER_PHYS_BASE	0x23400000
-#define TS72XX_CPLDVER_VIRT_BASE	IOMEM(0xfebfc000)
-#define TS72XX_CPLDVER_SIZE		0x00001000
-
-#ifndef __ASSEMBLY__
-
-static inline int ts72xx_model(void)
-{
-	return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK;
-}
-
-static inline int board_is_ts7200(void)
-{
-	return ts72xx_model() == TS72XX_MODEL_TS7200;
-}
-
-static inline int board_is_ts7250(void)
-{
-	return ts72xx_model() == TS72XX_MODEL_TS7250;
-}
-
-static inline int board_is_ts7260(void)
-{
-	return ts72xx_model() == TS72XX_MODEL_TS7260;
-}
-
-static inline int board_is_ts7300(void)
-{
-	return ts72xx_model()  == TS72XX_MODEL_TS7300;
-}
-
-static inline int board_is_ts7400(void)
-{
-	return ts72xx_model() == TS72XX_MODEL_TS7400;
-}
-
-static inline int is_max197_installed(void)
-{
-	return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
-					TS72XX_OPTIONS_MAX197);
-}
-
-static inline int is_ts9420_installed(void)
-{
-	return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
-					TS72XX_OPTIONS2_TS9420);
-}
-#endif
-#endif /* __TS72XX_H_ */
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
deleted file mode 100644
index 30d9cf3791eb..000000000000
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ /dev/null
@@ -1,311 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/vision_ep9307.c
- * Vision Engraving Systems EP9307 SoM support.
- *
- * Copyright (C) 2008-2011 Vision Engraving Systems
- * H Hartley Sweeten <hsweeten@visionengravers.com>
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/fb.h>
-#include <linux/io.h>
-#include <linux/mtd/partitions.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/mmc/host.h>
-
-#include <sound/cs4271.h>
-
-#include "hardware.h"
-#include <linux/platform_data/video-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include "gpio-ep93xx.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-/*************************************************************************
- * Static I/O mappings for the FPGA
- *************************************************************************/
-#define VISION_PHYS_BASE	EP93XX_CS7_PHYS_BASE
-#define VISION_VIRT_BASE	0xfebff000
-
-static struct map_desc vision_io_desc[] __initdata = {
-	{
-		.virtual	= VISION_VIRT_BASE,
-		.pfn		= __phys_to_pfn(VISION_PHYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init vision_map_io(void)
-{
-	ep93xx_map_io();
-
-	iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc));
-}
-
-/*************************************************************************
- * Ethernet
- *************************************************************************/
-static struct ep93xx_eth_data vision_eth_data __initdata = {
-	.phy_id		= 1,
-};
-
-/*************************************************************************
- * Framebuffer
- *************************************************************************/
-#define VISION_LCD_ENABLE	EP93XX_GPIO_LINE_EGPIO1
-
-static int vision_lcd_setup(struct platform_device *pdev)
-{
-	int err;
-
-	err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH,
-				dev_name(&pdev->dev));
-	if (err)
-		return err;
-
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS |
-				 EP93XX_SYSCON_DEVCFG_RASONP3 |
-				 EP93XX_SYSCON_DEVCFG_EXVC);
-
-	return 0;
-}
-
-static void vision_lcd_teardown(struct platform_device *pdev)
-{
-	gpio_free(VISION_LCD_ENABLE);
-}
-
-static void vision_lcd_blank(int blank_mode, struct fb_info *info)
-{
-	if (blank_mode)
-		gpio_set_value(VISION_LCD_ENABLE, 0);
-	else
-		gpio_set_value(VISION_LCD_ENABLE, 1);
-}
-
-static struct ep93xxfb_mach_info ep93xxfb_info __initdata = {
-	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
-	.setup		= vision_lcd_setup,
-	.teardown	= vision_lcd_teardown,
-	.blank		= vision_lcd_blank,
-};
-
-
-/*************************************************************************
- * GPIO Expanders
- *************************************************************************/
-#define PCA9539_74_GPIO_BASE	(EP93XX_GPIO_LINE_MAX + 1)
-#define PCA9539_75_GPIO_BASE	(PCA9539_74_GPIO_BASE + 16)
-#define PCA9539_76_GPIO_BASE	(PCA9539_75_GPIO_BASE + 16)
-#define PCA9539_77_GPIO_BASE	(PCA9539_76_GPIO_BASE + 16)
-
-static struct pca953x_platform_data pca953x_74_gpio_data = {
-	.gpio_base	= PCA9539_74_GPIO_BASE,
-	.irq_base	= EP93XX_BOARD_IRQ(0),
-};
-
-static struct pca953x_platform_data pca953x_75_gpio_data = {
-	.gpio_base	= PCA9539_75_GPIO_BASE,
-	.irq_base	= -1,
-};
-
-static struct pca953x_platform_data pca953x_76_gpio_data = {
-	.gpio_base	= PCA9539_76_GPIO_BASE,
-	.irq_base	= -1,
-};
-
-static struct pca953x_platform_data pca953x_77_gpio_data = {
-	.gpio_base	= PCA9539_77_GPIO_BASE,
-	.irq_base	= -1,
-};
-
-/*************************************************************************
- * I2C Bus
- *************************************************************************/
-
-static struct i2c_board_info vision_i2c_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("isl1208", 0x6f),
-		.irq		= IRQ_EP93XX_EXT1,
-	}, {
-		I2C_BOARD_INFO("pca9539", 0x74),
-		.platform_data	= &pca953x_74_gpio_data,
-	}, {
-		I2C_BOARD_INFO("pca9539", 0x75),
-		.platform_data	= &pca953x_75_gpio_data,
-	}, {
-		I2C_BOARD_INFO("pca9539", 0x76),
-		.platform_data	= &pca953x_76_gpio_data,
-	}, {
-		I2C_BOARD_INFO("pca9539", 0x77),
-		.platform_data	= &pca953x_77_gpio_data,
-	},
-};
-
-/*************************************************************************
- * SPI CS4271 Audio Codec
- *************************************************************************/
-static struct cs4271_platform_data vision_cs4271_data = {
-	.gpio_nreset	= EP93XX_GPIO_LINE_H(2),
-};
-
-/*************************************************************************
- * SPI Flash
- *************************************************************************/
-static struct mtd_partition vision_spi_flash_partitions[] = {
-	{
-		.name	= "SPI bootstrap",
-		.offset	= 0,
-		.size	= SZ_4K,
-	}, {
-		.name	= "Bootstrap config",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= SZ_4K,
-	}, {
-		.name	= "System config",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct flash_platform_data vision_spi_flash_data = {
-	.name		= "SPI Flash",
-	.parts		= vision_spi_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(vision_spi_flash_partitions),
-};
-
-/*************************************************************************
- * SPI SD/MMC host
- *************************************************************************/
-static struct mmc_spi_platform_data vision_spi_mmc_data = {
-	.detect_delay	= 100,
-	.powerup_msecs	= 100,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.caps2		= MMC_CAP2_RO_ACTIVE_HIGH,
-};
-
-static struct gpiod_lookup_table vision_spi_mmc_gpio_table = {
-	.dev_id = "mmc_spi.2", /* "mmc_spi @ CS2 */
-	.table = {
-		/* Card detect */
-		GPIO_LOOKUP_IDX("B", 7, NULL, 0, GPIO_ACTIVE_LOW),
-		/* Write protect */
-		GPIO_LOOKUP_IDX("F", 0, NULL, 1, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/*************************************************************************
- * SPI Bus
- *************************************************************************/
-static struct spi_board_info vision_spi_board_info[] __initdata = {
-	{
-		.modalias		= "cs4271",
-		.platform_data		= &vision_cs4271_data,
-		.max_speed_hz		= 6000000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-		.mode			= SPI_MODE_3,
-	}, {
-		.modalias		= "sst25l",
-		.platform_data		= &vision_spi_flash_data,
-		.max_speed_hz		= 20000000,
-		.bus_num		= 0,
-		.chip_select		= 1,
-		.mode			= SPI_MODE_3,
-	}, {
-		.modalias		= "mmc_spi",
-		.platform_data		= &vision_spi_mmc_data,
-		.max_speed_hz		= 20000000,
-		.bus_num		= 0,
-		.chip_select		= 2,
-		.mode			= SPI_MODE_3,
-	},
-};
-
-static struct gpiod_lookup_table vision_spi_cs_gpio_table = {
-	.dev_id = "spi0",
-	.table = {
-		GPIO_LOOKUP_IDX("A", 6, "cs", 0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("A", 7, "cs", 1, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("G", 2, "cs", 2, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct ep93xx_spi_info vision_spi_master __initdata = {
-	.use_dma	= 1,
-};
-
-/*************************************************************************
- * I2S Audio
- *************************************************************************/
-static struct platform_device vision_audio_device = {
-	.name		= "edb93xx-audio",
-	.id		= -1,
-};
-
-static void __init vision_register_i2s(void)
-{
-	ep93xx_register_i2s();
-	platform_device_register(&vision_audio_device);
-}
-
-/*************************************************************************
- * Machine Initialization
- *************************************************************************/
-static void __init vision_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M);
-	ep93xx_register_eth(&vision_eth_data, 1);
-	ep93xx_register_fb(&ep93xxfb_info);
-	ep93xx_register_pwm(1, 0);
-
-	/*
-	 * Request the gpio expander's interrupt gpio line now to prevent
-	 * the kernel from doing a WARN in gpiolib:gpio_ensure_requested().
-	 */
-	if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN,
-				"pca9539:74"))
-		pr_warn("cannot request interrupt gpio for pca9539:74\n");
-
-	vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7));
-
-	ep93xx_register_i2c(vision_i2c_info,
-				ARRAY_SIZE(vision_i2c_info));
-	gpiod_add_lookup_table(&vision_spi_mmc_gpio_table);
-	gpiod_add_lookup_table(&vision_spi_cs_gpio_table);
-	ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
-				ARRAY_SIZE(vision_spi_board_info));
-	vision_register_i2s();
-}
-
-MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
-	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS + EP93XX_BOARD_IRQS,
-	.map_io		= vision_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= vision_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 4d3b40e4049a..b3d5df5225fe 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -78,6 +78,11 @@ config CPU_EXYNOS4210
 	default y
 	depends on ARCH_EXYNOS4
 
+config SOC_EXYNOS4212
+	bool "Samsung Exynos4212"
+	default y
+	depends on ARCH_EXYNOS4
+
 config SOC_EXYNOS4412
 	bool "Samsung Exynos4412"
 	default y
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 29eb075b24a4..f4c0d33a29e2 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -15,6 +15,7 @@
 #define EXYNOS3_SOC_MASK	0xFFFFF000
 
 #define EXYNOS4210_CPU_ID	0x43210000
+#define EXYNOS4212_CPU_ID	0x43220000
 #define EXYNOS4412_CPU_ID	0xE4412200
 #define EXYNOS4_CPU_MASK	0xFFFE0000
 
@@ -34,6 +35,7 @@ static inline int is_samsung_##name(void)	\
 
 IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK)
 IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
 IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK)
@@ -52,6 +54,12 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
 # define soc_is_exynos4210()	0
 #endif
 
+#if defined(CONFIG_SOC_EXYNOS4212)
+# define soc_is_exynos4212()	is_samsung_exynos4212()
+#else
+# define soc_is_exynos4212()	0
+#endif
+
 #if defined(CONFIG_SOC_EXYNOS4412)
 # define soc_is_exynos4412()	is_samsung_exynos4412()
 #else
@@ -106,7 +114,7 @@ void exynos_firmware_init(void);
 #define C2_STATE	(1 << 3)
 /*
  * Magic values for bootloader indicating chosen low power mode.
- * See also Documentation/arm/samsung/bootloader-interface.rst
+ * See also Documentation/arch/arm/samsung/bootloader-interface.rst
  */
 #define EXYNOS_SLEEP_MAGIC	0x00000bad
 #define EXYNOS_AFTR_MAGIC	0xfcba0d10
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 51a247ca4da8..2e8099479ffa 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -50,11 +50,13 @@ void __init exynos_sysram_init(void)
 	struct device_node *node;
 
 	for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") {
+		struct resource res;
 		if (!of_device_is_available(node))
 			continue;
-		sysram_base_addr = of_iomap(node, 0);
-		sysram_base_phys = of_translate_address(node,
-					   of_get_address(node, 0, NULL, NULL));
+
+		of_address_to_resource(node, 0, &res);
+		sysram_base_addr = ioremap(res.start, resource_size(&res));
+		sysram_base_phys = res.start;
 		of_node_put(node);
 		break;
 	}
@@ -178,6 +180,7 @@ static void __init exynos_dt_machine_init(void)
 		exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
 #endif
 	if (of_machine_is_compatible("samsung,exynos4210") ||
+	    of_machine_is_compatible("samsung,exynos4212") ||
 	    (of_machine_is_compatible("samsung,exynos4412") &&
 	     (of_machine_is_compatible("samsung,trats2") ||
 		  of_machine_is_compatible("samsung,midas") ||
@@ -192,6 +195,7 @@ static char const *const exynos_dt_compat[] __initconst = {
 	"samsung,exynos3250",
 	"samsung,exynos4",
 	"samsung,exynos4210",
+	"samsung,exynos4212",
 	"samsung,exynos4412",
 	"samsung,exynos5",
 	"samsung,exynos5250",
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index 2da5b60b59e2..a5e22678e27b 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -63,12 +63,18 @@ static int exynos_cpu_boot(int cpu)
 	 *
 	 * On Exynos5 devices the call is ignored by trustzone firmware.
 	 */
-	if (!soc_is_exynos4210() && !soc_is_exynos4412())
+	if (!soc_is_exynos4210() && !soc_is_exynos4212() &&
+	    !soc_is_exynos4412())
 		return 0;
 
 	/*
 	 * The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
+	 * But, Exynos4212 has only one secondary CPU so second parameter
+	 * isn't used for informing secure firmware about CPU id.
 	 */
+	if (soc_is_exynos4212())
+		cpu = 0;
+
 	exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
 	return 0;
 }
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 30f4e55bf39e..0019d21bff90 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -161,7 +161,7 @@ void exynos_enter_aftr(void)
 
 	exynos_pm_central_suspend();
 
-	if (soc_is_exynos4412()) {
+	if (soc_is_exynos4212() || soc_is_exynos4412()) {
 		/* Setting SEQ_OPTION register */
 		pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
 			       S5P_CENTRAL_SEQ_OPTION);
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 3bf14ca78b62..150a1e56dcae 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -209,9 +209,8 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
 		return -ENOMEM;
 	}
 
-	domain = irq_domain_add_hierarchy(parent_domain, 0, 0,
-					  node, &exynos_pmu_domain_ops,
-					  NULL);
+	domain = irq_domain_create_hierarchy(parent_domain, 0, 0, of_fwnode_handle(node),
+					     &exynos_pmu_domain_ops, NULL);
 	if (!domain) {
 		iounmap(pmu_base_addr);
 		pmu_base_addr = NULL;
@@ -231,6 +230,7 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
 
 EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu");
 EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu");
+EXYNOS_PMU_IRQ(exynos4212_pmu_irq, "samsung,exynos4212-pmu");
 EXYNOS_PMU_IRQ(exynos4412_pmu_irq, "samsung,exynos4412-pmu");
 EXYNOS_PMU_IRQ(exynos5250_pmu_irq, "samsung,exynos5250-pmu");
 EXYNOS_PMU_IRQ(exynos5420_pmu_irq, "samsung,exynos5420-pmu");
@@ -641,6 +641,9 @@ static const struct of_device_id exynos_pmu_of_device_ids[] __initconst = {
 		.compatible = "samsung,exynos4210-pmu",
 		.data = &exynos4_pm_data,
 	}, {
+		.compatible = "samsung,exynos4212-pmu",
+		.data = &exynos4_pm_data,
+	}, {
 		.compatible = "samsung,exynos4412-pmu",
 		.data = &exynos4_pm_data,
 	}, {
@@ -667,7 +670,7 @@ void __init exynos_pm_init(void)
 		return;
 	}
 
-	if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) {
+	if (WARN_ON(!of_property_read_bool(np, "interrupt-controller"))) {
 		pr_warn("Outdated DT detected, suspend/resume will NOT work\n");
 		of_node_put(np);
 		return;
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index acc10b1caa69..78189997caa1 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -1,38 +1,25 @@
 # SPDX-License-Identifier: GPL-2.0-only
-if ARCH_FOOTBRIDGE
-
-menu "Footbridge Implementations"
-
-config ARCH_CATS
-	bool "CATS"
-	depends on UNUSED_BOARD_FILES
-	select CLKEVT_I8253
-	select CLKSRC_I8253
-	select FOOTBRIDGE_HOST
-	select ISA
-	select ISA_DMA
-	select FORCE_PCI
+menuconfig ARCH_FOOTBRIDGE
+	bool "FootBridge Implementations"
+	depends on ARCH_MULTI_V4 && !(ARCH_MULTI_V4T || ARCH_MULTI_V5)
+	depends on !(ARCH_MOXART || ARCH_GEMINI || ARCH_SA1100)
+	depends on ATAGS
+	depends on CPU_LITTLE_ENDIAN
+	depends on MMU
+	select ARCH_NO_SG_CHAIN
+	select CPU_SA110
+	select FOOTBRIDGE
+	select NEED_MACH_MEMORY_H
 	help
-	  Say Y here if you intend to run this kernel on the CATS.
-
-	  Saying N will reduce the size of the Footbridge kernel.
+	  Support for systems based on the DC21285 companion chip
+	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
-config ARCH_EBSA285_ADDIN
-	bool "EBSA285 (addin mode)"
-	select ARCH_EBSA285
-	select FOOTBRIDGE_ADDIN
-	help
-	  Say Y here if you intend to run this kernel on the EBSA285 card
-	  in addin mode.
-
-	  Saying N will reduce the size of the Footbridge kernel.
+if ARCH_FOOTBRIDGE
 
 config ARCH_EBSA285_HOST
 	bool "EBSA285 (host mode)"
 	select ARCH_EBSA285
-	select FOOTBRIDGE_HOST
 	select ISA
-	select ISA_DMA
 	select ARCH_MAY_HAVE_PC_FDC
 	select FORCE_PCI
 	help
@@ -45,9 +32,7 @@ config ARCH_NETWINDER
 	bool "NetWinder"
 	select CLKEVT_I8253
 	select CLKSRC_I8253
-	select FOOTBRIDGE_HOST
 	select ISA
-	select ISA_DMA
 	select FORCE_PCI
 	help
 	  Say Y here if you intend to run this kernel on the Rebel.COM
@@ -57,23 +42,12 @@ config ARCH_NETWINDER
 
 	  Saying N will reduce the size of the Footbridge kernel.
 
-endmenu
-
 # Footbridge support
 config FOOTBRIDGE
-	select ARCH_HAS_PHYS_TO_DMA
-	bool
-
-# Footbridge in host mode
-config FOOTBRIDGE_HOST
-	bool
+	def_bool y
 	select ARCH_MIGHT_HAVE_PC_SERIO
+	select ISA_DMA_API
 
-# Footbridge in addin mode
-config FOOTBRIDGE_ADDIN
-	bool
-
-# EBSA285 board in either host or addin mode
 config ARCH_EBSA285
 	bool
 
diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index 6262993c0555..1553cc01b45c 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -5,17 +5,14 @@
 
 # Object file lists.
 
-obj-y			:= common.o dma.o isa-irq.o
+obj-y			:= common.o isa-irq.o isa.o isa-rtc.o dma-isa.o
 
 pci-y			+= dc21285.o
-pci-$(CONFIG_ARCH_CATS) += cats-pci.o
-pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
+pci-$(CONFIG_ARCH_EBSA285) += ebsa285-pci.o
 pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
 
-obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o
 obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o
 obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o
 
 obj-$(CONFIG_PCI)	+=$(pci-y)
 
-obj-$(CONFIG_ISA)	+= isa.o isa-rtc.o
diff --git a/arch/arm/mach-footbridge/Makefile.boot b/arch/arm/mach-footbridge/Makefile.boot
deleted file mode 100644
index e4313e912cac..000000000000
--- a/arch/arm/mach-footbridge/Makefile.boot
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
deleted file mode 100644
index e575dc0698cd..000000000000
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-footbridge/cats-hw.c
- *
- * CATS machine fixup
- *
- * Copyright (C) 1998, 1999 Russell King, Phil Blundell
- */
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/screen_info.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm/hardware/dec21285.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-#define CFG_PORT	0x370
-#define INDEX_PORT	(CFG_PORT)
-#define DATA_PORT	(CFG_PORT + 1)
-
-static int __init cats_hw_init(void)
-{
-	if (machine_is_cats()) {
-		/* Set Aladdin to CONFIGURE mode */
-		outb(0x51, CFG_PORT);
-		outb(0x23, CFG_PORT);
-
-		/* Select logical device 3 */
-		outb(0x07, INDEX_PORT);
-		outb(0x03, DATA_PORT);
-
-		/* Set parallel port to DMA channel 3, ECP+EPP1.9, 
-		   enable EPP timeout */
-		outb(0x74, INDEX_PORT);
-		outb(0x03, DATA_PORT);
-	
-		outb(0xf0, INDEX_PORT);
-		outb(0x0f, DATA_PORT);
-
-		outb(0xf1, INDEX_PORT);
-		outb(0x07, DATA_PORT);
-
-		/* Select logical device 4 */
-		outb(0x07, INDEX_PORT);
-		outb(0x04, DATA_PORT);
-
-		/* UART1 high speed mode */
-		outb(0xf0, INDEX_PORT);
-		outb(0x02, DATA_PORT);
-
-		/* Select logical device 5 */
-		outb(0x07, INDEX_PORT);
-		outb(0x05, DATA_PORT);
-
-		/* UART2 high speed mode */
-		outb(0xf0, INDEX_PORT);
-		outb(0x02, DATA_PORT);
-
-		/* Set Aladdin to RUN mode */
-		outb(0xbb, CFG_PORT);
-	}
-
-	return 0;
-}
-
-__initcall(cats_hw_init);
-
-/*
- * CATS uses soft-reboot by default, since
- * hard reboots fail on early boards.
- */
-static void __init
-fixup_cats(struct tag *tags, char **cmdline)
-{
-#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
-	screen_info.orig_video_lines  = 25;
-	screen_info.orig_video_points = 16;
-	screen_info.orig_y = 24;
-#endif
-}
-
-MACHINE_START(CATS, "Chalice-CATS")
-	/* Maintainer: Philip Blundell */
-	.atag_offset	= 0x100,
-	.reboot_mode	= REBOOT_SOFT,
-	.fixup		= fixup_cats,
-	.map_io		= footbridge_map_io,
-	.init_irq	= footbridge_init_irq,
-	.init_time	= isa_timer_init,
-	.restart	= footbridge_restart,
-MACHINE_END
diff --git a/arch/arm/mach-footbridge/cats-pci.c b/arch/arm/mach-footbridge/cats-pci.c
deleted file mode 100644
index 90b1e9be430e..000000000000
--- a/arch/arm/mach-footbridge/cats-pci.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-footbridge/cats-pci.c
- *
- * PCI bios-type initialisation for PCI machines
- *
- * Bits taken from various places.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/* cats host-specific stuff */
-static int irqmap_cats[] = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
-
-static u8 cats_no_swizzle(struct pci_dev *dev, u8 *pin)
-{
-	return 0;
-}
-
-static int cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (dev->irq >= 255)
-		return -1;	/* not a valid interrupt. */
-
-	if (dev->irq >= 128)
-		return dev->irq & 0x1f;
-
-	if (dev->irq >= 1 && dev->irq <= 4)
-		return irqmap_cats[dev->irq - 1];
-
-	if (dev->irq != 0)
-		printk("PCI: device %02x:%02x has unknown irq line %x\n",
-		       dev->bus->number, dev->devfn, dev->irq);
-
-	return -1;
-}
-
-/*
- * why not the standard PCI swizzle?  does this prevent 4-port tulip
- * cards being used (ie, pci-pci bridge based cards)?
- */
-static struct hw_pci cats_pci __initdata = {
-	.swizzle		= cats_no_swizzle,
-	.map_irq		= cats_map_irq,
-	.nr_controllers		= 1,
-	.ops			= &dc21285_ops,
-	.setup			= dc21285_setup,
-	.preinit		= dc21285_preinit,
-	.postinit		= dc21285_postinit,
-};
-
-static int __init cats_pci_init(void)
-{
-	if (machine_is_cats())
-		pci_common_init(&cats_pci);
-	return 0;
-}
-
-subsys_initcall(cats_pci_init);
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index 5020eb96b025..85c598708c10 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -198,9 +198,6 @@ void __init footbridge_init_irq(void)
 
 	__fb_init_irq();
 
-	if (!footbridge_cfn_mode())
-		return;
-
 	if (machine_is_ebsa285())
 		/* The following is dependent on which slot
 		 * you plug the Southbridge card into.  We
@@ -209,9 +206,6 @@ void __init footbridge_init_irq(void)
 		 */
 		isa_init_irq(IRQ_PCI);
 
-	if (machine_is_cats())
-		isa_init_irq(IRQ_IN2);
-
 	if (machine_is_netwinder())
 		isa_init_irq(IRQ_IN3);
 }
@@ -221,21 +215,13 @@ void __init footbridge_init_irq(void)
  * commented out since there is a "No Fix" problem with it.  Not mapping
  * it means that we have extra bullet protection on our feet.
  */
-static struct map_desc fb_common_io_desc[] __initdata = {
+static struct map_desc ebsa285_host_io_desc[] __initdata = {
 	{
 		.virtual	= ARMCSR_BASE,
 		.pfn		= __phys_to_pfn(DC21285_ARMCSR_BASE),
 		.length		= ARMCSR_SIZE,
 		.type		= MT_DEVICE,
-	}
-};
-
-/*
- * The mapping when the footbridge is in host mode.  We don't map any of
- * this when we are in add-in mode.
- */
-static struct map_desc ebsa285_host_io_desc[] __initdata = {
-#if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST)
+	},
 	{
 		.virtual	= PCIMEM_BASE,
 		.pfn		= __phys_to_pfn(DC21285_PCI_MEM),
@@ -257,26 +243,12 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = {
 		.length		= PCIIACK_SIZE,
 		.type		= MT_DEVICE,
 	},
-#endif
 };
 
 void __init footbridge_map_io(void)
 {
-	/*
-	 * Set up the common mapping first; we need this to
-	 * determine whether we're in host mode or not.
-	 */
-	iotable_init(fb_common_io_desc, ARRAY_SIZE(fb_common_io_desc));
-
-	/*
-	 * Now, work out what we've got to map in addition on this
-	 * platform.
-	 */
-	if (footbridge_cfn_mode()) {
-		iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
-		pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
-	}
-
+	iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
+	pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
 	vga_base = PCIMEM_BASE;
 }
 
@@ -306,49 +278,3 @@ void footbridge_restart(enum reboot_mode mode, const char *cmd)
 		*CSR_SA110_CNTL |= (1 << 13);
 	}
 }
-
-#ifdef CONFIG_FOOTBRIDGE_ADDIN
-
-static inline unsigned long fb_bus_sdram_offset(void)
-{
-	return *CSR_PCISDRAMBASE & 0xfffffff0;
-}
-
-/*
- * These two functions convert virtual addresses to PCI addresses and PCI
- * addresses to virtual addresses.  Note that it is only legal to use these
- * on memory obtained via get_zeroed_page or kmalloc.
- */
-unsigned long __virt_to_bus(unsigned long res)
-{
-	WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
-
-	return res + (fb_bus_sdram_offset() - PAGE_OFFSET);
-}
-EXPORT_SYMBOL(__virt_to_bus);
-
-unsigned long __bus_to_virt(unsigned long res)
-{
-	res = res - (fb_bus_sdram_offset() - PAGE_OFFSET);
-
-	WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
-
-	return res;
-}
-EXPORT_SYMBOL(__bus_to_virt);
-#else
-static inline unsigned long fb_bus_sdram_offset(void)
-{
-	return BUS_OFFSET;
-}
-#endif /* CONFIG_FOOTBRIDGE_ADDIN */
-
-dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
-{
-	return paddr + (fb_bus_sdram_offset() - PHYS_OFFSET);
-}
-
-phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr)
-{
-	return dev_addr - (fb_bus_sdram_offset() - PHYS_OFFSET);
-}
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index f9713dc561cf..6521ab3d24fa 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -5,6 +5,7 @@
  *  Copyright (C) 1998-2001 Russell King
  *  Copyright (C) 1998-2000 Phil Blundell
  */
+#include <linux/dma-map-ops.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
@@ -134,7 +135,7 @@ static struct timer_list perr_timer;
 
 static void dc21285_enable_error(struct timer_list *timer)
 {
-	del_timer(timer);
+	timer_delete(timer);
 
 	if (timer == &serr_timer)
 		enable_irq(IRQ_PCI_SERR);
@@ -241,13 +242,26 @@ static irqreturn_t dc21285_parity_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int dc21285_pci_bus_notifier(struct notifier_block *nb,
+				    unsigned long action,
+				    void *data)
+{
+	if (action != BUS_NOTIFY_ADD_DEVICE)
+		return NOTIFY_DONE;
+
+	dma_direct_set_offset(data, PHYS_OFFSET, BUS_OFFSET, SZ_256M);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block dc21285_pci_bus_nb = {
+	.notifier_call = dc21285_pci_bus_notifier,
+};
+
 int __init dc21285_setup(int nr, struct pci_sys_data *sys)
 {
 	struct resource *res;
 
-	if (nr || !footbridge_cfn_mode())
-		return 0;
-
 	res = kcalloc(2, sizeof(struct resource), GFP_KERNEL);
 	if (!res) {
 		printk("out of memory for root bus resources");
@@ -269,6 +283,8 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys)
 	pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset);
 	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
 
+	bus_register_notifier(&pci_bus_type, &dc21285_pci_bus_nb);
+
 	return 1;
 }
 
@@ -278,7 +294,6 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys)
 void __init dc21285_preinit(void)
 {
 	unsigned int mem_size, mem_mask;
-	int cfn_mode;
 
 	pcibios_min_mem = 0x81000000;
 
@@ -298,21 +313,15 @@ void __init dc21285_preinit(void)
 	*CSR_CSRBASEOFFSET    = 0;
 	*CSR_PCIADDR_EXTN     = 0;
 
-	cfn_mode = __footbridge_cfn_mode();
-
 	printk(KERN_INFO "PCI: DC21285 footbridge, revision %02lX, in "
-		"%s mode\n", *CSR_CLASSREV & 0xff, cfn_mode ?
-		"central function" : "addin");
-
-	if (footbridge_cfn_mode()) {
-		/*
-		 * Clear any existing errors - we aren't
-		 * interested in historical data...
-		 */
-		*CSR_SA110_CNTL	= (*CSR_SA110_CNTL & 0xffffde07) |
-				  SA110_CNTL_RXSERR;
-		*CSR_PCICMD = (*CSR_PCICMD & 0xffff) | PCICMD_ERROR_BITS;
-	}
+		"central function mode\n", *CSR_CLASSREV & 0xff);
+
+	/*
+	 * Clear any existing errors - we aren't
+	 * interested in historical data...
+	 */
+	*CSR_SA110_CNTL	= (*CSR_SA110_CNTL & 0xffffde07) | SA110_CNTL_RXSERR;
+	*CSR_PCICMD = (*CSR_PCICMD & 0xffff) | PCICMD_ERROR_BITS;
 
 	timer_setup(&serr_timer, dc21285_enable_error, 0);
 	timer_setup(&perr_timer, dc21285_enable_error, 0);
@@ -331,29 +340,18 @@ void __init dc21285_preinit(void)
 	dc21285_request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, 0,
 			    "PCI data parity", NULL);
 
-	if (cfn_mode) {
-		/*
-		 * Map our SDRAM at a known address in PCI space, just in case
-		 * the firmware had other ideas.  Using a nonzero base is
-		 * necessary, since some VGA cards forcefully use PCI addresses
-		 * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards).
-		 */
-		*CSR_PCICSRBASE       = 0xf4000000;
-		*CSR_PCICSRIOBASE     = 0;
-		*CSR_PCISDRAMBASE     = __virt_to_bus(PAGE_OFFSET);
-		*CSR_PCIROMBASE       = 0;
-		*CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
-			      PCI_COMMAND_INVALIDATE | PCICMD_ERROR_BITS;
-	} else if (footbridge_cfn_mode() != 0) {
-		/*
-		 * If we are not compiled to accept "add-in" mode, then
-		 * we are using a constant virt_to_bus translation which
-		 * can not hope to cater for the way the host BIOS  has
-		 * set up the machine.
-		 */
-		panic("PCI: this kernel is compiled for central "
-			"function mode only");
-	}
+	/*
+	 * Map our SDRAM at a known address in PCI space, just in case
+	 * the firmware had other ideas.  Using a nonzero base is
+	 * necessary, since some VGA cards forcefully use PCI addresses
+	 * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards).
+	 */
+	*CSR_PCICSRBASE       = 0xf4000000;
+	*CSR_PCICSRIOBASE     = 0;
+	*CSR_PCISDRAMBASE     = BUS_OFFSET;
+	*CSR_PCIROMBASE       = 0;
+	*CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+		      PCI_COMMAND_INVALIDATE | PCICMD_ERROR_BITS;
 }
 
 void __init dc21285_postinit(void)
diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/mach-footbridge/dma-isa.c
index 2d90ecce5a11..937f5376d5e7 100644
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/mach-footbridge/dma-isa.c
@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- *  linux/arch/arm/kernel/dma-isa.c
- *
  *  Copyright (C) 1999-2000 Russell King
  *
  *  ISA DMA primitives
@@ -13,6 +11,7 @@
  *   arch/arm/kernel/dma-ebsa285.c
  *   Copyright (C) 1998 Phil Blundell
  */
+#include <linux/dma-map-ops.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
@@ -20,6 +19,7 @@
 
 #include <asm/dma.h>
 #include <asm/mach/dma.h>
+#include <asm/hardware/dec21285.h>
 
 #define ISA_DMA_MASK		0
 #define ISA_DMA_MODE		1
@@ -157,7 +157,7 @@ static dma_t isa_dma[8];
 /*
  * ISA DMA always starts at channel 0
  */
-void __init isa_init_dma(void)
+static int __init isa_dma_init(void)
 {
 	/*
 	 * Try to autodetect presence of an ISA DMA controller.
@@ -222,4 +222,9 @@ void __init isa_init_dma(void)
 
 		request_dma(DMA_ISA_CASCADE, "cascade");
 	}
+
+	dma_direct_set_offset(&isa_dma_dev, PHYS_OFFSET, BUS_OFFSET, SZ_256M);
+
+	return 0;
 }
+core_initcall(isa_dma_init);
diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c
deleted file mode 100644
index 86618074a7a5..000000000000
--- a/arch/arm/mach-footbridge/dma.c
+++ /dev/null
@@ -1,58 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *  linux/arch/arm/kernel/dma-ebsa285.c
- *
- *  Copyright (C) 1998 Phil Blundell
- *
- * DMA functions specific to EBSA-285/CATS architectures
- *
- *  Changelog:
- *   09-Nov-1998 RMK	Split out ISA DMA functions to dma-isa.c
- *   17-Mar-1999 RMK	Allow any EBSA285-like architecture to have
- *			ISA DMA controllers.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/scatterlist.h>
-
-#include <asm/dma.h>
-
-#include <asm/mach/dma.h>
-#include <asm/hardware/dec21285.h>
-
-#if 0
-static int fb_dma_request(unsigned int chan, dma_t *dma)
-{
-	return -EINVAL;
-}
-
-static void fb_dma_enable(unsigned int chan, dma_t *dma)
-{
-}
-
-static void fb_dma_disable(unsigned int chan, dma_t *dma)
-{
-}
-
-static struct dma_ops fb_dma_ops = {
-	.type		= "fb",
-	.request	= fb_dma_request,
-	.enable		= fb_dma_enable,
-	.disable	= fb_dma_disable,
-};
-#endif
-
-static int __init fb_dma_init(void)
-{
-#if 0
-	dma[_DC21285_DMA(0)].d_ops = &fb_dma_ops;
-	dma[_DC21285_DMA(1)].d_ops = &fb_dma_ops;
-#endif
-#ifdef CONFIG_ISA_DMA
-	if (footbridge_cfn_mode())
-		isa_init_dma();
-#endif
-	return 0;
-}
-core_initcall(fb_dma_init);
diff --git a/arch/arm/mach-footbridge/include/mach/dma-direct.h b/arch/arm/mach-footbridge/include/mach/dma-direct.h
deleted file mode 100644
index 01f9e8367c00..000000000000
--- a/arch/arm/mach-footbridge/include/mach/dma-direct.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef MACH_FOOTBRIDGE_DMA_DIRECT_H
-#define MACH_FOOTBRIDGE_DMA_DIRECT_H 1
-
-dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr);
-phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr);
-
-#endif /* MACH_FOOTBRIDGE_DMA_DIRECT_H */
diff --git a/arch/arm/mach-footbridge/include/mach/isa-dma.h b/arch/arm/mach-footbridge/include/mach/isa-dma.h
index 8a1b991076e1..b10731a1f66a 100644
--- a/arch/arm/mach-footbridge/include/mach/isa-dma.h
+++ b/arch/arm/mach-footbridge/include/mach/isa-dma.h
@@ -10,17 +10,9 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
 
-/*
- * The 21285 has two internal DMA channels; we call these 8 and 9.
- * On CATS hardware we have an additional eight ISA dma channels
- * numbered 0..7.
- */
-#define _ISA_DMA(x)		(0+(x))
-#define _DC21285_DMA(x)		(8+(x))
-
-#define MAX_DMA_CHANNELS	10
+#define MAX_DMA_CHANNELS	8
 
-#define DMA_FLOPPY		_ISA_DMA(2)
-#define DMA_ISA_CASCADE		_ISA_DMA(4)
+#define DMA_FLOPPY		(2)
+#define DMA_ISA_CASCADE		(4)
 
 #endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h
index 3a5d2638c18f..9516877667d7 100644
--- a/arch/arm/mach-footbridge/include/mach/memory.h
+++ b/arch/arm/mach-footbridge/include/mach/memory.h
@@ -16,37 +16,6 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
-
-#if defined(CONFIG_FOOTBRIDGE_ADDIN)
-/*
- * If we may be using add-in footbridge mode, then we must
- * use the out-of-line translation that makes use of the
- * PCI BAR
- */
-#ifndef __ASSEMBLY__
-extern unsigned long __virt_to_bus(unsigned long);
-extern unsigned long __bus_to_virt(unsigned long);
-#endif
-#define __virt_to_bus	__virt_to_bus
-#define __bus_to_virt	__bus_to_virt
-
-#elif defined(CONFIG_FOOTBRIDGE_HOST)
-
-/*
- * The footbridge is programmed to expose the system RAM at 0xe0000000.
- * The requirement is that the RAM isn't placed at bus address 0, which
- * would clash with VGA cards.
- */
-#define BUS_OFFSET		0xe0000000
-#define __virt_to_bus(x)	((x) + (BUS_OFFSET - PAGE_OFFSET))
-#define __bus_to_virt(x)	((x) - (BUS_OFFSET - PAGE_OFFSET))
-
-#else
-
-#error "Undefined footbridge mode"
-
-#endif
-
 /*
  * Cache flushing area.
  */
diff --git a/arch/arm/mach-footbridge/isa-rtc.c b/arch/arm/mach-footbridge/isa-rtc.c
index b8f741a3a37e..237b828dd2f1 100644
--- a/arch/arm/mach-footbridge/isa-rtc.c
+++ b/arch/arm/mach-footbridge/isa-rtc.c
@@ -20,7 +20,6 @@
 
 #include <linux/init.h>
 #include <linux/mc146818rtc.h>
-#include <linux/bcd.h>
 #include <linux/io.h>
 
 #include "common.h"
diff --git a/arch/arm/mach-footbridge/isa.c b/arch/arm/mach-footbridge/isa.c
index ec5af521cf95..84caccddce44 100644
--- a/arch/arm/mach-footbridge/isa.c
+++ b/arch/arm/mach-footbridge/isa.c
@@ -79,16 +79,12 @@ static int __init footbridge_isa_init(void)
 {
 	int err = 0;
 
-	if (!footbridge_cfn_mode())
-		return 0;
-
 	/* Personal server doesn't have RTC */
-	if (!machine_is_personal_server()) {
-		isa_rtc_init();
-		err = platform_device_register(&rtc_device);
-		if (err)
-			printk(KERN_ERR "Unable to register RTC device: %d\n", err);
-	}
+	isa_rtc_init();
+	err = platform_device_register(&rtc_device);
+	if (err)
+		printk(KERN_ERR "Unable to register RTC device: %d\n", err);
+
 	err = platform_device_register(&serial_device);
 	if (err)
 		printk(KERN_ERR "Unable to register serial device: %d\n", err);
diff --git a/arch/arm/mach-gemini/board-dt.c b/arch/arm/mach-gemini/board-dt.c
index de0afcc8d94a..fbafe7475c02 100644
--- a/arch/arm/mach-gemini/board-dt.c
+++ b/arch/arm/mach-gemini/board-dt.c
@@ -42,8 +42,9 @@ static void gemini_idle(void)
 	 */
 
 	/* FIXME: Enabling interrupts here is racy! */
-	local_irq_enable();
+	raw_local_irq_enable();
 	cpu_do_idle();
+	raw_local_irq_disable();
 }
 
 static void __init gemini_init_machine(void)
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 5d4f977ac7d2..47335c7dadf8 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -143,7 +143,7 @@ static void __init highbank_init(void)
 	sregs_base = of_iomap(np, 0);
 	WARN_ON(!sregs_base);
 
-	pm_power_off = highbank_power_off;
+	register_platform_power_off(highbank_power_off);
 	highbank_pm_init();
 
 	bus_register_notifier(&platform_bus_type, &highbank_platform_nb);
diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c
index 561941baeda9..3fdbdb83113b 100644
--- a/arch/arm/mach-highbank/pm.c
+++ b/arch/arm/mach-highbank/pm.c
@@ -12,6 +12,8 @@
 
 #include <uapi/linux/psci.h>
 
+#include "core.h"
+
 #define HIGHBANK_SUSPEND_PARAM \
 	((0 << PSCI_0_2_POWER_STATE_ID_SHIFT) | \
 	 (1 << PSCI_0_2_POWER_STATE_AFFL_SHIFT) | \
diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c
index c517941416f1..f5655ad1c351 100644
--- a/arch/arm/mach-hisi/hotplug.c
+++ b/arch/arm/mach-hisi/hotplug.c
@@ -8,7 +8,6 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/of_address.h>
-#include <linux/of_platform.h>
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 #include "core.h"
diff --git a/arch/arm/mach-hpe/Kconfig b/arch/arm/mach-hpe/Kconfig
deleted file mode 100644
index 3372bbf38d38..000000000000
--- a/arch/arm/mach-hpe/Kconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-menuconfig ARCH_HPE
-	bool "HPE SoC support"
-	depends on ARCH_MULTI_V7
-	help
-	  This enables support for HPE ARM based BMC chips.
-if ARCH_HPE
-
-config ARCH_HPE_GXP
-	bool "HPE GXP SoC"
-	depends on ARCH_MULTI_V7
-	select ARM_VIC
-	select GENERIC_IRQ_CHIP
-	select CLKSRC_MMIO
-	help
-	  HPE GXP is the name of the HPE Soc. This SoC is used to implement many
-	  BMC features at HPE. It supports ARMv7 architecture based on the Cortex
-	  A9 core. It is capable of using an AXI bus to which a memory controller
-	  is attached. It has multiple SPI interfaces to connect boot flash and
-	  BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It
-	  has multiple i2c engines to drive connectivity with a host
-	  infrastructure.
-
-endif
diff --git a/arch/arm/mach-hpe/Makefile b/arch/arm/mach-hpe/Makefile
deleted file mode 100644
index 8b0a91234df4..000000000000
--- a/arch/arm/mach-hpe/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_ARCH_HPE_GXP) += gxp.o
diff --git a/arch/arm/mach-hpe/gxp.c b/arch/arm/mach-hpe/gxp.c
deleted file mode 100644
index ef3341373006..000000000000
--- a/arch/arm/mach-hpe/gxp.c
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */
-
-#include <linux/of_platform.h>
-#include <asm/mach/arch.h>
-
-static const char * const gxp_board_dt_compat[] = {
-	"hpe,gxp",
-	NULL,
-};
-
-DT_MACHINE_START(GXP_DT, "HPE GXP")
-	.dt_compat	= gxp_board_dt_compat,
-	.l2c_aux_val = 0,
-	.l2c_aux_mask = ~0,
-MACHINE_END
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 77e435df8dfe..6ea1bd55acf8 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_MXC
 	bool "Freescale i.MX family"
-	depends on (ARCH_MULTI_V4_V5 && CPU_LITTLE_ENDIAN) || \
+	depends on ((ARCH_MULTI_V4T || ARCH_MULTI_V5) && CPU_LITTLE_ENDIAN) || \
 		ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
 	select CLKSRC_IMX_GPT
 	select GENERIC_IRQ_CHIP
@@ -49,7 +49,6 @@ config SOC_IMX31
 config SOC_IMX35
 	bool "i.MX35 support"
 	select MXC_AVIC
-	select PINCTRL_IMX35
 	help
 	  This enables support for Freescale i.MX35 processor
 
@@ -61,7 +60,6 @@ config SOC_IMX1
 	bool "i.MX1 support"
 	select CPU_ARM920T
 	select MXC_AVIC
-	select PINCTRL_IMX1
 	help
 	  This enables support for Freescale i.MX1 processor
 
@@ -73,7 +71,6 @@ config SOC_IMX25
 	bool "i.MX25 support"
 	select CPU_ARM926T
 	select MXC_AVIC
-	select PINCTRL_IMX25
 	help
 	  This enables support for Freescale i.MX25 processor
 
@@ -81,7 +78,6 @@ config SOC_IMX27
 	bool "i.MX27 support"
 	select CPU_ARM926T
 	select MXC_AVIC
-	select PINCTRL_IMX27
 	help
 	  This enables support for Freescale i.MX27 processor
 
@@ -98,7 +94,6 @@ config SOC_IMX5
 
 config SOC_IMX50
 	bool "i.MX50 support"
-	select PINCTRL_IMX50
 	select SOC_IMX5
 
 	help
@@ -106,14 +101,12 @@ config SOC_IMX50
 
 config SOC_IMX51
 	bool "i.MX51 support"
-	select PINCTRL_IMX51
 	select SOC_IMX5
 	help
 	  This enables support for Freescale i.MX51 processor
 
 config SOC_IMX53
 	bool "i.MX53 support"
-	select PINCTRL_IMX53
 	select SOC_IMX5
 
 	help
@@ -137,7 +130,6 @@ config SOC_IMX6Q
 	select ARM_ERRATA_775420
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD
-	select PINCTRL_IMX6Q
 	select SOC_IMX6
 
 	help
@@ -147,7 +139,6 @@ config SOC_IMX6SL
 	bool "i.MX6 SoloLite support"
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
-	select PINCTRL_IMX6SL
 	select SOC_IMX6
 
 	help
@@ -157,7 +148,6 @@ config SOC_IMX6SLL
 	bool "i.MX6 SoloLiteLite support"
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
-	select PINCTRL_IMX6SLL
 	select SOC_IMX6
 
 	help
@@ -167,7 +157,6 @@ config SOC_IMX6SX
 	bool "i.MX6 SoloX support"
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
-	select PINCTRL_IMX6SX
 	select SOC_IMX6
 
 	help
@@ -175,7 +164,6 @@ config SOC_IMX6SX
 
 config SOC_IMX6UL
 	bool "i.MX6 UltraLite support"
-	select PINCTRL_IMX6UL
 	select SOC_IMX6
 	select ARM_ERRATA_814220
 
@@ -211,7 +199,6 @@ config SOC_IMX7D_CM4
 
 config SOC_IMX7D
 	bool "i.MX7 Dual support"
-	select PINCTRL_IMX7D
 	select SOC_IMX7D_CA7 if ARCH_MULTI_V7
 	select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M
 	select ARM_ERRATA_814220 if ARCH_MULTI_V7
@@ -221,7 +208,6 @@ config SOC_IMX7D
 config SOC_IMX7ULP
 	bool "i.MX7ULP support"
 	select CLKSRC_IMX_TPM
-	select PINCTRL_IMX7ULP
 	select SOC_IMX7D_CA7 if ARCH_MULTI_V7
 	select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M
 	help
@@ -237,7 +223,6 @@ config SOC_IMXRT
 config SOC_VF610
 	bool "Vybrid Family VF610 support"
 	select ARM_GIC if ARCH_MULTI_V7
-	select PINCTRL_VF610
 
 	help
 	  This enables support for Freescale Vybrid VF610 processor.
@@ -257,7 +242,7 @@ choice
 
 	config VF_USE_PIT_TIMER
 		bool "Use PIT timer"
-		select VF_PIT_TIMER
+		select NXP_PIT_TIMER
 		help
 		  Use SoC Periodic Interrupt Timer (PIT) as clocksource
 
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 6fb3965b9ae6..5c650bf40e02 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -34,7 +34,6 @@ obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
 ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_IMX7D_CA7)$(CONFIG_SOC_LS1021A),)
-AFLAGS_headsmp.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 endif
@@ -48,12 +47,10 @@ obj-$(CONFIG_SOC_IMX7D_CM4) += mach-imx7d-cm4.o
 obj-$(CONFIG_SOC_IMX7ULP) += mach-imx7ulp.o pm-imx7ulp.o
 
 ifeq ($(CONFIG_SUSPEND),y)
-AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
 obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
 endif
 ifeq ($(CONFIG_ARM_CPU_SUSPEND),y)
-AFLAGS_resume-imx6.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SOC_IMX6) += resume-imx6.o
 endif
 obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/arch/arm/mach-imx/Makefile.boot
+++ /dev/null
diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c
index cf6546ddc7a3..3067c06b4b8e 100644
--- a/arch/arm/mach-imx/avic.c
+++ b/arch/arm/mach-imx/avic.c
@@ -201,8 +201,8 @@ static void __init mxc_init_irq(void __iomem *irqbase)
 	WARN_ON(irq_base < 0);
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,avic");
-	domain = irq_domain_add_legacy(np, AVIC_NUM_IRQS, irq_base, 0,
-				       &irq_domain_simple_ops, NULL);
+	domain = irq_domain_create_legacy(of_fwnode_handle(np), AVIC_NUM_IRQS, irq_base, 0,
+					  &irq_domain_simple_ops, NULL);
 	WARN_ON(!domain);
 
 	for (i = 0; i < AVIC_NUM_IRQS / 32; i++, irq_base += 32)
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 13f3068e9845..45c1a2a7b35f 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -98,7 +98,7 @@ extern const u32 imx53_suspend_sz;
 void imx6_suspend(void __iomem *ocram_vbase);
 #else
 static inline void imx53_suspend(void __iomem *ocram_vbase) {}
-static const u32 imx53_suspend_sz;
+static __maybe_unused const u32 imx53_suspend_sz;
 static inline void imx6_suspend(void __iomem *ocram_vbase) {}
 #endif
 
diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c
index 3e63445cde06..cc86977d0a34 100644
--- a/arch/arm/mach-imx/cpu-imx25.c
+++ b/arch/arm/mach-imx/cpu-imx25.c
@@ -23,6 +23,7 @@ static int mx25_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 	rev = readl(iim_base + MXC_IIMSREV);
 	iounmap(iim_base);
diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c
index bf70e13bbe9e..1d2893908368 100644
--- a/arch/arm/mach-imx/cpu-imx27.c
+++ b/arch/arm/mach-imx/cpu-imx27.c
@@ -28,6 +28,7 @@ static int mx27_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
 	ccm_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!ccm_base);
 	/*
 	 * now we have access to the IO registers. As we need
diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c
index b9c24b851d1a..35c544924e50 100644
--- a/arch/arm/mach-imx/cpu-imx31.c
+++ b/arch/arm/mach-imx/cpu-imx31.c
@@ -39,6 +39,7 @@ static int mx31_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx31-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 
 	/* read SREV register from IIM module */
diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c
index 80e7d8ab9f1b..1fe75b39c2d9 100644
--- a/arch/arm/mach-imx/cpu-imx35.c
+++ b/arch/arm/mach-imx/cpu-imx35.c
@@ -21,6 +21,7 @@ static int mx35_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx35-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 
 	rev = imx_readl(iim_base + MXC_IIMSREV);
diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c
index ad56263778f9..a67c89bf155d 100644
--- a/arch/arm/mach-imx/cpu-imx5.c
+++ b/arch/arm/mach-imx/cpu-imx5.c
@@ -28,6 +28,7 @@ static u32 imx5_read_srev_reg(const char *compat)
 
 	np = of_find_compatible_node(NULL, NULL, compat);
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!iim_base);
 
 	srev = readl(iim_base + IIM_SREV) & 0xff;
diff --git a/arch/arm/mach-imx/cpuidle-imx5.c b/arch/arm/mach-imx/cpuidle-imx5.c
index a8457c4eb99a..5ad9f2f533cd 100644
--- a/arch/arm/mach-imx/cpuidle-imx5.c
+++ b/arch/arm/mach-imx/cpuidle-imx5.c
@@ -8,8 +8,8 @@
 #include <asm/system_misc.h>
 #include "cpuidle.h"
 
-static int imx5_cpuidle_enter(struct cpuidle_device *dev,
-			      struct cpuidle_driver *drv, int index)
+static __cpuidle int imx5_cpuidle_enter(struct cpuidle_device *dev,
+					struct cpuidle_driver *drv, int index)
 {
 	arm_pm_idle();
 	return index;
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index d086cbae09c3..2b0d3160f993 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -17,17 +17,17 @@
 static int num_idle_cpus = 0;
 static DEFINE_RAW_SPINLOCK(cpuidle_lock);
 
-static int imx6q_enter_wait(struct cpuidle_device *dev,
-			    struct cpuidle_driver *drv, int index)
+static __cpuidle int imx6q_enter_wait(struct cpuidle_device *dev,
+				      struct cpuidle_driver *drv, int index)
 {
 	raw_spin_lock(&cpuidle_lock);
 	if (++num_idle_cpus == num_online_cpus())
 		imx6_set_lpm(WAIT_UNCLOCKED);
 	raw_spin_unlock(&cpuidle_lock);
 
-	ct_idle_enter();
+	ct_cpuidle_enter();
 	cpu_do_idle();
-	ct_idle_exit();
+	ct_cpuidle_exit();
 
 	raw_spin_lock(&cpuidle_lock);
 	if (num_idle_cpus-- == num_online_cpus())
diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c
index b86ffbeb28e4..b49cd6302dce 100644
--- a/arch/arm/mach-imx/cpuidle-imx6sl.c
+++ b/arch/arm/mach-imx/cpuidle-imx6sl.c
@@ -11,8 +11,8 @@
 #include "common.h"
 #include "cpuidle.h"
 
-static int imx6sl_enter_wait(struct cpuidle_device *dev,
-			    struct cpuidle_driver *drv, int index)
+static __cpuidle int imx6sl_enter_wait(struct cpuidle_device *dev,
+				       struct cpuidle_driver *drv, int index)
 {
 	imx6_set_lpm(WAIT_UNCLOCKED);
 	/*
diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c
index 74ea1720e3d8..83c5cbd3748e 100644
--- a/arch/arm/mach-imx/cpuidle-imx6sx.c
+++ b/arch/arm/mach-imx/cpuidle-imx6sx.c
@@ -30,8 +30,8 @@ static int imx6sx_idle_finish(unsigned long val)
 	return 0;
 }
 
-static int imx6sx_enter_wait(struct cpuidle_device *dev,
-			    struct cpuidle_driver *drv, int index)
+static __cpuidle int imx6sx_enter_wait(struct cpuidle_device *dev,
+				       struct cpuidle_driver *drv, int index)
 {
 	imx6_set_lpm(WAIT_UNCLOCKED);
 
@@ -47,7 +47,9 @@ static int imx6sx_enter_wait(struct cpuidle_device *dev,
 		cpu_pm_enter();
 		cpu_cluster_pm_enter();
 
+		ct_cpuidle_enter();
 		cpu_suspend(0, imx6sx_idle_finish);
+		ct_cpuidle_exit();
 
 		cpu_cluster_pm_exit();
 		cpu_pm_exit();
@@ -87,7 +89,8 @@ static struct cpuidle_driver imx6sx_cpuidle_driver = {
 			 */
 			.exit_latency = 300,
 			.target_residency = 500,
-			.flags = CPUIDLE_FLAG_TIMER_STOP,
+			.flags = CPUIDLE_FLAG_TIMER_STOP |
+				 CPUIDLE_FLAG_RCU_IDLE,
 			.enter = imx6sx_enter_wait,
 			.name = "LOW-POWER-IDLE",
 			.desc = "ARM power off",
diff --git a/arch/arm/mach-imx/cpuidle-imx7ulp.c b/arch/arm/mach-imx/cpuidle-imx7ulp.c
index ca86c967d19e..f55ed74acfae 100644
--- a/arch/arm/mach-imx/cpuidle-imx7ulp.c
+++ b/arch/arm/mach-imx/cpuidle-imx7ulp.c
@@ -12,8 +12,8 @@
 #include "common.h"
 #include "cpuidle.h"
 
-static int imx7ulp_enter_wait(struct cpuidle_device *dev,
-			    struct cpuidle_driver *drv, int index)
+static __cpuidle int imx7ulp_enter_wait(struct cpuidle_device *dev,
+					struct cpuidle_driver *drv, int index)
 {
 	if (index == 1)
 		imx7ulp_set_lpm(ULP_PM_WAIT);
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index ebc4339b8be4..2e633569d2f8 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -245,9 +245,8 @@ static int __init imx_gpc_init(struct device_node *node,
 	if (WARN_ON(!gpc_base))
 	        return -ENOMEM;
 
-	domain = irq_domain_add_hierarchy(parent_domain, 0, GPC_MAX_IRQS,
-					  node, &imx_gpc_domain_ops,
-					  NULL);
+	domain = irq_domain_create_hierarchy(parent_domain, 0, GPC_MAX_IRQS, of_fwnode_handle(node),
+					     &imx_gpc_domain_ops, NULL);
 	if (!domain) {
 		iounmap(gpc_base);
 		return -ENOMEM;
@@ -275,7 +274,7 @@ void __init imx_gpc_check_dt(void)
 	if (WARN_ON(!np))
 		return;
 
-	if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) {
+	if (WARN_ON(!of_property_read_bool(np, "interrupt-controller"))) {
 		pr_warn("Outdated DT detected, suspend/resume will NOT work\n");
 
 		/* map GPC, so that at least CPUidle and WARs keep working */
diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S
index fcba58be8e79..5f9c7b48ae80 100644
--- a/arch/arm/mach-imx/headsmp.S
+++ b/arch/arm/mach-imx/headsmp.S
@@ -8,6 +8,8 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 
+.arch armv7-a
+
 diag_reg_offset:
 	.word	g_diag_reg - .
 
diff --git a/arch/arm/mach-imx/mach-imx1.c b/arch/arm/mach-imx/mach-imx1.c
index 8eca92d66a2e..a4688f575ffe 100644
--- a/arch/arm/mach-imx/mach-imx1.c
+++ b/arch/arm/mach-imx/mach-imx1.c
@@ -3,15 +3,11 @@
  *  Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
  */
 
-#include <linux/of_platform.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 
 #include "common.h"
 #include "hardware.h"
 
-#define MX1_AVIC_ADDR	0x00223000
-
 static void __init imx1_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX1);
diff --git a/arch/arm/mach-imx/mach-imx25.c b/arch/arm/mach-imx/mach-imx25.c
index 51927bd08aef..114df312a99a 100644
--- a/arch/arm/mach-imx/mach-imx25.c
+++ b/arch/arm/mach-imx/mach-imx25.c
@@ -3,12 +3,7 @@
  * Copyright 2012 Sascha Hauer, Pengutronix
  */
 
-#include <linux/irq.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
 #include "common.h"
 #include "hardware.h"
 
diff --git a/arch/arm/mach-imx/mach-imx27.c b/arch/arm/mach-imx/mach-imx27.c
index e325c9468105..ada84fe8a1fd 100644
--- a/arch/arm/mach-imx/mach-imx27.c
+++ b/arch/arm/mach-imx/mach-imx27.c
@@ -4,14 +4,8 @@
  */
 
 #include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/mm.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 #include "common.h"
 #include "hardware.h"
diff --git a/arch/arm/mach-imx/mach-imx35.c b/arch/arm/mach-imx/mach-imx35.c
index 0fc08218b77d..35dbc719fb6d 100644
--- a/arch/arm/mach-imx/mach-imx35.c
+++ b/arch/arm/mach-imx/mach-imx35.c
@@ -5,15 +5,7 @@
  * based on imx27-dt.c
  */
 
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/clk-provider.h>
-#include <linux/clocksource.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/cache-l2x0.h>
 #include "common.h"
 #include "mx35.h"
 
diff --git a/arch/arm/mach-imx/mach-imx50.c b/arch/arm/mach-imx/mach-imx50.c
index a2d35f9ba474..9dc9d0ae9342 100644
--- a/arch/arm/mach-imx/mach-imx50.c
+++ b/arch/arm/mach-imx/mach-imx50.c
@@ -5,7 +5,6 @@
  * Copyright 2011 Linaro Ltd.
  */
 
-#include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 
 #include "common.h"
diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c
index 8b748a1854d7..510801f6f71c 100644
--- a/arch/arm/mach-imx/mach-imx51.c
+++ b/arch/arm/mach-imx/mach-imx51.c
@@ -5,12 +5,9 @@
  */
 
 #include <linux/io.h>
-#include <linux/irq.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
 
 #include "common.h"
 #include "hardware.h"
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 8223c5aee45d..6622406e0081 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -4,15 +4,7 @@
  * Copyright 2011 Linaro Ltd.
  */
 
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
 
 #include "common.h"
 #include "hardware.h"
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index c9d7c29d95e1..7f6200925752 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -79,7 +79,7 @@ static void __init imx6q_enet_phy_init(void)
 static void __init imx6q_1588_init(void)
 {
 	struct device_node *np;
-	struct clk *ptp_clk;
+	struct clk *ptp_clk, *fec_enet_ref;
 	struct clk *enet_ref;
 	struct regmap *gpr;
 	u32 clksel;
@@ -90,6 +90,14 @@ static void __init imx6q_1588_init(void)
 		return;
 	}
 
+	/*
+	 * If enet_clk_ref configured, we assume DT did it properly and .
+	 * clk-imx6q.c will do needed configuration.
+	 */
+	fec_enet_ref = of_clk_get_by_name(np, "enet_clk_ref");
+	if (!IS_ERR(fec_enet_ref))
+		goto put_node;
+
 	ptp_clk = of_clk_get(np, 2);
 	if (IS_ERR(ptp_clk)) {
 		pr_warn("%s: failed to get ptp clock\n", __func__);
diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
index e65ed5218f53..3feb31ab556e 100644
--- a/arch/arm/mach-imx/mach-imx6sx.c
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -5,41 +5,17 @@
 
 #include <linux/irqchip.h>
 #include <linux/of_platform.h>
-#include <linux/phy.h>
 #include <linux/regmap.h>
 #include <linux/mfd/syscon.h>
-#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 
 #include "common.h"
 #include "cpuidle.h"
 
-static void __init imx6sx_enet_clk_sel(void)
-{
-	struct regmap *gpr;
-
-	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sx-iomuxc-gpr");
-	if (!IS_ERR(gpr)) {
-		regmap_update_bits(gpr, IOMUXC_GPR1,
-				   IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK, 0);
-		regmap_update_bits(gpr, IOMUXC_GPR1,
-				   IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK, 0);
-	} else {
-		pr_err("failed to find fsl,imx6sx-iomux-gpr regmap\n");
-	}
-}
-
-static inline void imx6sx_enet_init(void)
-{
-	imx6sx_enet_clk_sel();
-}
-
 static void __init imx6sx_init_machine(void)
 {
 	of_platform_default_populate(NULL, NULL, NULL);
 
-	imx6sx_enet_init();
 	imx_anatop_init();
 	imx6sx_pm_init();
 }
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index 35e81201cb5d..cb6d29c2bb5f 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -3,43 +3,19 @@
  * Copyright (C) 2015 Freescale Semiconductor, Inc.
  */
 #include <linux/irqchip.h>
-#include <linux/mfd/syscon.h>
-#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
-#include <linux/micrel_phy.h>
 #include <linux/of_platform.h>
-#include <linux/phy.h>
-#include <linux/regmap.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 
 #include "common.h"
 #include "cpuidle.h"
 #include "hardware.h"
 
-static void __init imx6ul_enet_clk_init(void)
-{
-	struct regmap *gpr;
-
-	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6ul-iomuxc-gpr");
-	if (!IS_ERR(gpr))
-		regmap_update_bits(gpr, IOMUXC_GPR1, IMX6UL_GPR1_ENET_CLK_DIR,
-				   IMX6UL_GPR1_ENET_CLK_OUTPUT);
-	else
-		pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n");
-}
-
-static inline void imx6ul_enet_init(void)
-{
-	imx6ul_enet_clk_init();
-}
-
 static void __init imx6ul_init_machine(void)
 {
 	imx_print_silicon_rev(cpu_is_imx6ull() ? "i.MX6ULL" : "i.MX6UL",
 		imx_get_soc_revision());
 
 	of_platform_default_populate(NULL, NULL, NULL);
-	imx6ul_enet_init();
 	imx_anatop_init();
 	imx6ul_pm_init();
 }
@@ -63,6 +39,7 @@ static void __init imx6ul_init_late(void)
 static const char * const imx6ul_dt_compat[] __initconst = {
 	"fsl,imx6ul",
 	"fsl,imx6ull",
+	"fsl,imx6ulz",
 	NULL,
 };
 
diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c
index 6fdd06bcf988..87632ae0201c 100644
--- a/arch/arm/mach-imx/mach-imx7d.c
+++ b/arch/arm/mach-imx/mach-imx7d.c
@@ -5,7 +5,7 @@
 #include <linux/irqchip.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
-#include <linux/of_platform.h>
+#include <linux/platform_device.h>
 #include <linux/phy.h>
 #include <linux/regmap.h>
 
@@ -48,7 +48,7 @@ static void __init imx7d_enet_clk_sel(void)
 	}
 }
 
-static inline void imx7d_enet_init(void)
+static void __init imx7d_enet_init(void)
 {
 	imx7d_enet_phy_init();
 	imx7d_enet_clk_sel();
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 28db97289ee8..0788c5cc7f9e 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -12,7 +12,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/of_address.h>
-#include <linux/pinctrl/machine.h>
 
 #include <asm/system_misc.h>
 #include <asm/hardware/cache-l2x0.h>
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
index af12668d0bf5..94e4f4a2f73f 100644
--- a/arch/arm/mach-imx/mmdc.c
+++ b/arch/arm/mach-imx/mmdc.c
@@ -13,7 +13,8 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/perf_event.h>
 #include <linux/slab.h>
 
@@ -99,10 +100,11 @@ struct mmdc_pmu {
 	cpumask_t cpu;
 	struct hrtimer hrtimer;
 	unsigned int active_events;
+	int id;
 	struct device *dev;
 	struct perf_event *mmdc_events[MMDC_NUM_COUNTERS];
 	struct hlist_node node;
-	struct fsl_mmdc_devtype_data *devtype_data;
+	const struct fsl_mmdc_devtype_data *devtype_data;
 	struct clk *mmdc_ipg_clk;
 };
 
@@ -433,10 +435,9 @@ static enum hrtimer_restart mmdc_pmu_timer_handler(struct hrtimer *hrtimer)
 static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
 		void __iomem *mmdc_base, struct device *dev)
 {
-	int mmdc_num;
-
 	*pmu_mmdc = (struct mmdc_pmu) {
 		.pmu = (struct pmu) {
+			.parent		= dev,
 			.task_ctx_nr    = perf_invalid_context,
 			.attr_groups    = attr_groups,
 			.event_init     = mmdc_pmu_event_init,
@@ -452,21 +453,21 @@ static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
 		.active_events = 0,
 	};
 
-	mmdc_num = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL);
+	pmu_mmdc->id = ida_alloc(&mmdc_ida, GFP_KERNEL);
 
-	return mmdc_num;
+	return pmu_mmdc->id;
 }
 
-static int imx_mmdc_remove(struct platform_device *pdev)
+static void imx_mmdc_remove(struct platform_device *pdev)
 {
 	struct mmdc_pmu *pmu_mmdc = platform_get_drvdata(pdev);
 
+	ida_free(&mmdc_ida, pmu_mmdc->id);
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	perf_pmu_unregister(&pmu_mmdc->pmu);
 	iounmap(pmu_mmdc->mmdc_base);
 	clk_disable_unprepare(pmu_mmdc->mmdc_ipg_clk);
 	kfree(pmu_mmdc);
-	return 0;
 }
 
 static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_base,
@@ -474,10 +475,7 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 {
 	struct mmdc_pmu *pmu_mmdc;
 	char *name;
-	int mmdc_num;
 	int ret;
-	const struct of_device_id *of_id =
-		of_match_device(imx_mmdc_dt_ids, &pdev->dev);
 
 	pmu_mmdc = kzalloc(sizeof(*pmu_mmdc), GFP_KERNEL);
 	if (!pmu_mmdc) {
@@ -497,19 +495,22 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 		cpuhp_mmdc_state = ret;
 	}
 
-	mmdc_num = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
-	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
-	if (mmdc_num == 0)
-		name = "mmdc";
-	else
-		name = devm_kasprintf(&pdev->dev,
-				GFP_KERNEL, "mmdc%d", mmdc_num);
+	ret = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
+	if (ret < 0)
+		goto  pmu_free;
 
-	pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data;
+	name = devm_kasprintf(&pdev->dev,
+				GFP_KERNEL, "mmdc%d", ret);
+	if (!name) {
+		ret = -ENOMEM;
+		goto pmu_release_id;
+	}
+
+	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
+	pmu_mmdc->devtype_data = device_get_match_data(&pdev->dev);
 
-	hrtimer_init(&pmu_mmdc->hrtimer, CLOCK_MONOTONIC,
-			HRTIMER_MODE_REL);
-	pmu_mmdc->hrtimer.function = mmdc_pmu_timer_handler;
+	hrtimer_setup(&pmu_mmdc->hrtimer, mmdc_pmu_timer_handler, CLOCK_MONOTONIC,
+		      HRTIMER_MODE_REL);
 
 	cpumask_set_cpu(raw_smp_processor_id(), &pmu_mmdc->cpu);
 
@@ -527,6 +528,8 @@ pmu_register_err:
 	pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret);
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	hrtimer_cancel(&pmu_mmdc->hrtimer);
+pmu_release_id:
+	ida_free(&mmdc_ida, pmu_mmdc->id);
 pmu_free:
 	kfree(pmu_mmdc);
 	return ret;
diff --git a/arch/arm/mach-imx/pm-imx25.c b/arch/arm/mach-imx/pm-imx25.c
index f253e5019465..0c574e8607fd 100644
--- a/arch/arm/mach-imx/pm-imx25.c
+++ b/arch/arm/mach-imx/pm-imx25.c
@@ -6,6 +6,7 @@
 #include <linux/kernel.h>
 #include <linux/suspend.h>
 #include <linux/io.h>
+#include "common.h"
 
 static int imx25_suspend_enter(suspend_state_t state)
 {
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index 2e3af2bc7758..6f0de45b71e9 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -12,6 +12,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
+#include <linux/platform_device.h>
 
 #include <asm/cacheflush.h>
 #include <asm/fncpy.h>
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index 045b9fdd342d..a671ca498f88 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -16,6 +16,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
+#include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/suspend.h>
 #include <asm/cacheflush.h>
@@ -633,13 +634,11 @@ static void imx6_pm_stby_poweroff(void)
 
 static int imx6_pm_stby_poweroff_probe(void)
 {
-	if (pm_power_off) {
-		pr_warn("%s: pm_power_off already claimed  %p %ps!\n",
-			__func__, pm_power_off, pm_power_off);
+	if (register_platform_power_off(imx6_pm_stby_poweroff)) {
+		pr_warn("%s: platform power off already claimed!\n", __func__);
 		return -EBUSY;
 	}
 
-	pm_power_off = imx6_pm_stby_poweroff;
 	return 0;
 }
 
diff --git a/arch/arm/mach-imx/resume-imx6.S b/arch/arm/mach-imx/resume-imx6.S
index 5bd1ba7ef15b..2c0c5c771251 100644
--- a/arch/arm/mach-imx/resume-imx6.S
+++ b/arch/arm/mach-imx/resume-imx6.S
@@ -9,6 +9,8 @@
 #include <asm/hardware/cache-l2x0.h>
 #include "hardware.h"
 
+.arch armv7-a
+
 /*
  * The following code must assume it is running from physical address
  * where absolute virtual addresses to the data section have to be
diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S
index e06f946b75b9..63ccc2d0e920 100644
--- a/arch/arm/mach-imx/suspend-imx6.S
+++ b/arch/arm/mach-imx/suspend-imx6.S
@@ -9,6 +9,8 @@
 #include <asm/hardware/cache-l2x0.h>
 #include "hardware.h"
 
+.arch armv7-a
+
 /*
  * ==================== low level suspend ====================
  *
diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c
index 8b3d98d288d9..50a5668e65d2 100644
--- a/arch/arm/mach-imx/tzic.c
+++ b/arch/arm/mach-imx/tzic.c
@@ -175,8 +175,8 @@ static int __init tzic_init_dt(struct device_node *np, struct device_node *p)
 	irq_base = irq_alloc_descs(-1, 0, TZIC_NUM_IRQS, numa_node_id());
 	WARN_ON(irq_base < 0);
 
-	domain = irq_domain_add_legacy(np, TZIC_NUM_IRQS, irq_base, 0,
-				       &irq_domain_simple_ops, NULL);
+	domain = irq_domain_create_legacy(of_fwnode_handle(np), TZIC_NUM_IRQS, irq_base, 0,
+					  &irq_domain_simple_ops, NULL);
 	WARN_ON(!domain);
 
 	for (i = 0; i < 4; i++, irq_base += 32)
diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig
deleted file mode 100644
index 761fbb04faa1..000000000000
--- a/arch/arm/mach-iop32x/Kconfig
+++ /dev/null
@@ -1,54 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menuconfig ARCH_IOP32X
-	bool "IOP32x-based platforms"
-	depends on ARCH_MULTI_V5
-	depends on CPU_LITTLE_ENDIAN
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_XSCALE
-	select GPIO_IOP
-	select GPIOLIB
-	select FORCE_PCI
-	help
-	  Support for Intel's 80219 and IOP32X (XScale) family of
-	  processors.
-
-if ARCH_IOP32X
-
-config MACH_EP80219
-	bool
-
-config MACH_GLANTANK
-	bool "Enable support for the IO-Data GLAN Tank"
-	help
-	  Say Y here if you want to run your kernel on the GLAN Tank
-	  NAS appliance or machines from IO-Data's HDL-Gxxx, HDL-GWxxx
-	  and HDL-GZxxx series.
-
-config ARCH_IQ80321
-	bool "Enable support for IQ80321"
-	help
-	  Say Y here if you want to run your kernel on the Intel IQ80321
-	  evaluation kit for the IOP321 processor.
-
-config ARCH_IQ31244
-	bool "Enable support for EP80219/IQ31244"
-	select MACH_EP80219
-	help
-	  Say Y here if you want to run your kernel on the Intel EP80219
-	  evaluation kit for the Intel 80219 processor (a IOP321 variant)
-	  or the IQ31244 evaluation kit for the IOP321 processor.
-
-config MACH_N2100
-	bool "Enable support for the Thecus n2100"
-	help
-	  Say Y here if you want to run your kernel on the Thecus n2100
-	  NAS appliance.
-
-config MACH_EM7210
-	bool "Enable support for the Lanner EM7210"
-	help
-	  Say Y here if you want to run your kernel on the Lanner EM7210
-	  board. Say also Y here if you have a SS4000e Baxter Creek NAS
-	  appliance."
-
-endif
diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile
deleted file mode 100644
index c8018ef5c6a9..000000000000
--- a/arch/arm/mach-iop32x/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-obj-$(CONFIG_ARCH_IOP32X) += irq.o
-obj-$(CONFIG_ARCH_IOP32X) += i2c.o
-obj-$(CONFIG_ARCH_IOP32X) += pci.o
-obj-$(CONFIG_ARCH_IOP32X) += setup.o
-obj-$(CONFIG_ARCH_IOP32X) += time.o
-obj-$(CONFIG_ARCH_IOP32X) += cp6.o
-obj-$(CONFIG_ARCH_IOP32X) += adma.o
-obj-$(CONFIG_ARCH_IOP32X) += pmu.o
-obj-$(CONFIG_ARCH_IOP32X) += restart.o
-
-obj-$(CONFIG_MACH_GLANTANK) += glantank.o
-obj-$(CONFIG_ARCH_IQ80321) += iq80321.o
-obj-$(CONFIG_ARCH_IQ31244) += iq31244.o
-obj-$(CONFIG_MACH_N2100) += n2100.o
-obj-$(CONFIG_MACH_EM7210) += em7210.o
diff --git a/arch/arm/mach-iop32x/Makefile.boot b/arch/arm/mach-iop32x/Makefile.boot
deleted file mode 100644
index 5c3af01c4000..000000000000
--- a/arch/arm/mach-iop32x/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0xa0008000
-params_phys-y	:= 0xa0000100
-initrd_phys-y	:= 0xa0800000
diff --git a/arch/arm/mach-iop32x/adma.c b/arch/arm/mach-iop32x/adma.c
deleted file mode 100644
index 764bcbff98df..000000000000
--- a/arch/arm/mach-iop32x/adma.c
+++ /dev/null
@@ -1,163 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform device definitions for the iop3xx dma/xor engines
- * Copyright © 2006, Intel Corporation.
- */
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_data/dma-iop32x.h>
-
-#include "iop3xx.h"
-#include "irqs.h"
-
-#define IRQ_DMA0_EOT IRQ_IOP32X_DMA0_EOT
-#define IRQ_DMA0_EOC IRQ_IOP32X_DMA0_EOC
-#define IRQ_DMA0_ERR IRQ_IOP32X_DMA0_ERR
-
-#define IRQ_DMA1_EOT IRQ_IOP32X_DMA1_EOT
-#define IRQ_DMA1_EOC IRQ_IOP32X_DMA1_EOC
-#define IRQ_DMA1_ERR IRQ_IOP32X_DMA1_ERR
-
-#define IRQ_AA_EOT IRQ_IOP32X_AA_EOT
-#define IRQ_AA_EOC IRQ_IOP32X_AA_EOC
-#define IRQ_AA_ERR IRQ_IOP32X_AA_ERR
-
-/* AAU and DMA Channels */
-static struct resource iop3xx_dma_0_resources[] = {
-	[0] = {
-		.start = IOP3XX_DMA_PHYS_BASE(0),
-		.end = IOP3XX_DMA_UPPER_PA(0),
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_DMA0_EOT,
-		.end = IRQ_DMA0_EOT,
-		.flags = IORESOURCE_IRQ
-	},
-	[2] = {
-		.start = IRQ_DMA0_EOC,
-		.end = IRQ_DMA0_EOC,
-		.flags = IORESOURCE_IRQ
-	},
-	[3] = {
-		.start = IRQ_DMA0_ERR,
-		.end = IRQ_DMA0_ERR,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource iop3xx_dma_1_resources[] = {
-	[0] = {
-		.start = IOP3XX_DMA_PHYS_BASE(1),
-		.end = IOP3XX_DMA_UPPER_PA(1),
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_DMA1_EOT,
-		.end = IRQ_DMA1_EOT,
-		.flags = IORESOURCE_IRQ
-	},
-	[2] = {
-		.start = IRQ_DMA1_EOC,
-		.end = IRQ_DMA1_EOC,
-		.flags = IORESOURCE_IRQ
-	},
-	[3] = {
-		.start = IRQ_DMA1_ERR,
-		.end = IRQ_DMA1_ERR,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-
-static struct resource iop3xx_aau_resources[] = {
-	[0] = {
-		.start = IOP3XX_AAU_PHYS_BASE,
-		.end = IOP3XX_AAU_UPPER_PA,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_AA_EOT,
-		.end = IRQ_AA_EOT,
-		.flags = IORESOURCE_IRQ
-	},
-	[2] = {
-		.start = IRQ_AA_EOC,
-		.end = IRQ_AA_EOC,
-		.flags = IORESOURCE_IRQ
-	},
-	[3] = {
-		.start = IRQ_AA_ERR,
-		.end = IRQ_AA_ERR,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static u64 iop3xx_adma_dmamask = DMA_BIT_MASK(32);
-
-static struct iop_adma_platform_data iop3xx_dma_0_data = {
-	.hw_id = DMA0_ID,
-	.pool_size = PAGE_SIZE,
-};
-
-static struct iop_adma_platform_data iop3xx_dma_1_data = {
-	.hw_id = DMA1_ID,
-	.pool_size = PAGE_SIZE,
-};
-
-static struct iop_adma_platform_data iop3xx_aau_data = {
-	.hw_id = AAU_ID,
-	.pool_size = 3 * PAGE_SIZE,
-};
-
-struct platform_device iop3xx_dma_0_channel = {
-	.name = "iop-adma",
-	.id = 0,
-	.num_resources = 4,
-	.resource = iop3xx_dma_0_resources,
-	.dev = {
-		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = (void *) &iop3xx_dma_0_data,
-	},
-};
-
-struct platform_device iop3xx_dma_1_channel = {
-	.name = "iop-adma",
-	.id = 1,
-	.num_resources = 4,
-	.resource = iop3xx_dma_1_resources,
-	.dev = {
-		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = (void *) &iop3xx_dma_1_data,
-	},
-};
-
-struct platform_device iop3xx_aau_channel = {
-	.name = "iop-adma",
-	.id = 2,
-	.num_resources = 4,
-	.resource = iop3xx_aau_resources,
-	.dev = {
-		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = (void *) &iop3xx_aau_data,
-	},
-};
-
-static int __init iop3xx_adma_cap_init(void)
-{
-	dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask);
-	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
-
-	dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask);
-	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
-
-	dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask);
-	dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
-
-	return 0;
-}
-
-arch_initcall(iop3xx_adma_cap_init);
diff --git a/arch/arm/mach-iop32x/cp6.c b/arch/arm/mach-iop32x/cp6.c
deleted file mode 100644
index 7135a0ac9949..000000000000
--- a/arch/arm/mach-iop32x/cp6.c
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * IOP Coprocessor-6 access handler
- * Copyright (c) 2006, Intel Corporation.
- */
-#include <linux/init.h>
-#include <asm/traps.h>
-#include <asm/ptrace.h>
-
-#include "iop3xx.h"
-
-void iop_enable_cp6(void)
-{
-	u32 temp;
-
-        /* enable cp6 access */
-        asm volatile (
-		"mrc	p15, 0, %0, c15, c1, 0\n\t"
-		"orr	%0, %0, #(1 << 6)\n\t"
-		"mcr	p15, 0, %0, c15, c1, 0\n\t"
-		"mrc	p15, 0, %0, c15, c1, 0\n\t"
-		"mov	%0, %0\n\t"
-		"sub	pc, pc, #4  @ cp_wait\n\t"
-		: "=r"(temp));
-}
-
-static int cp6_trap(struct pt_regs *regs, unsigned int instr)
-{
-	iop_enable_cp6();
-
-	return 0;
-}
-
-/* permit kernel space cp6 access
- * deny user space cp6 access
- */
-static struct undef_hook cp6_hook = {
-	.instr_mask     = 0x0f000ff0,
-	.instr_val      = 0x0e000610,
-	.cpsr_mask      = MODE_MASK,
-	.cpsr_val       = SVC_MODE,
-	.fn             = cp6_trap,
-};
-
-void __init iop_init_cp6_handler(void)
-{
-	register_undef_hook(&cp6_hook);
-}
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
deleted file mode 100644
index ac130aba5a6e..000000000000
--- a/arch/arm/mach-iop32x/em7210.c
+++ /dev/null
@@ -1,232 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-iop32x/em7210.c
- *
- * Board support code for the Lanner EM7210 platforms.
- *
- * Based on arch/arm/mach-iop32x/iq31244.c file.
- *
- * Copyright (C) 2007 Arnaud Patard <arnaud.patard@rtp-net.org>
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-
-#include "hardware.h"
-#include "gpio-iop32x.h"
-#include "irqs.h"
-
-static void __init em7210_timer_init(void)
-{
-	/* http://www.kwaak.net/fotos/fotos-nas/slide_24.html */
-	/* 33.333 MHz crystal.                                */
-	iop_init_time(200000000);
-}
-
-/*
- * EM7210 RTC
- */
-static struct i2c_board_info __initdata em7210_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372a", 0x32),
-	},
-};
-
-/*
- * EM7210 I/O
- */
-static struct map_desc em7210_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= IQ31244_UART,
-		.pfn		= __phys_to_pfn(IQ31244_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init em7210_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(em7210_io_desc, ARRAY_SIZE(em7210_io_desc));
-}
-
-
-/*
- * EM7210 PCI
- */
-#define INTA	IRQ_IOP32X_XINT0
-#define INTB	IRQ_IOP32X_XINT1
-#define INTC	IRQ_IOP32X_XINT2
-#define INTD	IRQ_IOP32X_XINT3
-
-static int __init
-em7210_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 * A       B       C       D
-		 */
-		{INTB, INTB, INTB, INTB}, /* console / uart */
-		{INTA, INTA, INTA, INTA}, /* 1st 82541      */
-		{INTD, INTD, INTD, INTD}, /* 2nd 82541      */
-		{INTC, INTC, INTC, INTC}, /* GD31244        */
-		{INTD, INTA, INTA, INTA}, /* mini-PCI       */
-		{INTD, INTC, INTA, INTA}, /* NEC USB        */
-	};
-
-	if (pin < 1 || pin > 4)
-		return -1;
-
-	return pci_irq_table[slot % 6][pin - 1];
-}
-
-static struct hw_pci em7210_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= em7210_pci_map_irq,
-};
-
-static int __init em7210_pci_init(void)
-{
-	if (machine_is_em7210())
-		pci_common_init(&em7210_pci);
-
-	return 0;
-}
-
-subsys_initcall(em7210_pci_init);
-
-
-/*
- * EM7210 Flash
- */
-static struct physmap_flash_data em7210_flash_data = {
-	.width		= 2,
-};
-
-static struct resource em7210_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf1ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device em7210_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &em7210_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &em7210_flash_resource,
-};
-
-
-/*
- * EM7210 UART
- * The physical address of the serial port is 0xfe800000,
- * so it can be used for physical and virtual address.
- */
-static struct plat_serial8250_port em7210_serial_port[] = {
-	{
-		.mapbase	= IQ31244_UART,
-		.membase	= (char *)IQ31244_UART,
-		.irq		= IRQ_IOP32X_XINT1,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource em7210_uart_resource = {
-	.start		= IQ31244_UART,
-	.end		= IQ31244_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device em7210_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= em7210_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &em7210_uart_resource,
-};
-
-#define EM7210_HARDWARE_POWER 0
-
-void em7210_power_off(void)
-{
-	int ret;
-
-	ret = gpio_direction_output(EM7210_HARDWARE_POWER, 1);
-	if (ret)
-		pr_crit("could not drive power off GPIO high\n");
-}
-
-static int __init em7210_request_gpios(void)
-{
-	int ret;
-
-	if (!machine_is_em7210())
-		return 0;
-
-	ret = gpio_request(EM7210_HARDWARE_POWER, "power");
-	if (ret) {
-		pr_err("could not request power off GPIO\n");
-		return 0;
-	}
-
-	pm_power_off = em7210_power_off;
-
-	return 0;
-}
-device_initcall(em7210_request_gpios);
-
-static void __init em7210_init_machine(void)
-{
-	register_iop32x_gpio();
-	platform_device_register(&em7210_serial_device);
-	gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
-	gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&em7210_flash_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-
-	i2c_register_board_info(0, em7210_i2c_devices,
-		ARRAY_SIZE(em7210_i2c_devices));
-}
-
-MACHINE_START(EM7210, "Lanner EM7210")
-	.atag_offset	= 0x100,
-	.nr_irqs	= IOP32X_NR_IRQS,
-	.map_io		= em7210_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= em7210_timer_init,
-	.init_machine	= em7210_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
deleted file mode 100644
index cd6e7da2ea10..000000000000
--- a/arch/arm/mach-iop32x/glantank.c
+++ /dev/null
@@ -1,214 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/glantank.c
- *
- * Board support code for the GLAN Tank.
- *
- * Copyright (C) 2006, 2007 Martin Michlmayr <tbm@cyrius.com>
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/f75375s.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "gpio-iop32x.h"
-#include "irqs.h"
-
-/*
- * GLAN Tank timer tick configuration.
- */
-static void __init glantank_timer_init(void)
-{
-	/* 33.333 MHz crystal.  */
-	iop_init_time(200000000);
-}
-
-
-/*
- * GLAN Tank I/O.
- */
-static struct map_desc glantank_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= GLANTANK_UART,
-		.pfn		= __phys_to_pfn(GLANTANK_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init glantank_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(glantank_io_desc, ARRAY_SIZE(glantank_io_desc));
-}
-
-
-/*
- * GLAN Tank PCI.
- */
-#define INTA	IRQ_IOP32X_XINT0
-#define INTB	IRQ_IOP32X_XINT1
-#define INTC	IRQ_IOP32X_XINT2
-#define INTD	IRQ_IOP32X_XINT3
-
-static int __init
-glantank_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 * A       B       C       D
-		 */
-		{INTD, INTD, INTD, INTD}, /* UART (8250) */
-		{INTA, INTA, INTA, INTA}, /* Ethernet (E1000) */
-		{INTB, INTB, INTB, INTB}, /* IDE (AEC6280R) */
-		{INTC, INTC, INTC, INTC}, /* USB (NEC) */
-	};
-
-	BUG_ON(pin < 1 || pin > 4);
-
-	return pci_irq_table[slot % 4][pin - 1];
-}
-
-static struct hw_pci glantank_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= glantank_pci_map_irq,
-};
-
-static int __init glantank_pci_init(void)
-{
-	if (machine_is_glantank())
-		pci_common_init(&glantank_pci);
-
-	return 0;
-}
-
-subsys_initcall(glantank_pci_init);
-
-
-/*
- * GLAN Tank machine initialization.
- */
-static struct physmap_flash_data glantank_flash_data = {
-	.width		= 2,
-};
-
-static struct resource glantank_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf007ffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device glantank_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &glantank_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &glantank_flash_resource,
-};
-
-static struct plat_serial8250_port glantank_serial_port[] = {
-	{
-		.mapbase	= GLANTANK_UART,
-		.membase	= (char *)GLANTANK_UART,
-		.irq		= IRQ_IOP32X_XINT3,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource glantank_uart_resource = {
-	.start		= GLANTANK_UART,
-	.end		= GLANTANK_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device glantank_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= glantank_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &glantank_uart_resource,
-};
-
-static struct f75375s_platform_data glantank_f75375s = {
-	.pwm		= { 255, 255 },
-	.pwm_enable	= { 0, 0 },
-};
-
-static struct i2c_board_info __initdata glantank_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372a", 0x32),
-	},
-	{
-		I2C_BOARD_INFO("f75375", 0x2e),
-		.platform_data = &glantank_f75375s,
-	},
-};
-
-static void glantank_power_off(void)
-{
-	__raw_writeb(0x01, IOMEM(0xfe8d0004));
-
-	while (1)
-		;
-}
-
-static void __init glantank_init_machine(void)
-{
-	register_iop32x_gpio();
-	gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
-	gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&glantank_flash_device);
-	platform_device_register(&glantank_serial_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-
-	i2c_register_board_info(0, glantank_i2c_devices,
-		ARRAY_SIZE(glantank_i2c_devices));
-
-	pm_power_off = glantank_power_off;
-}
-
-MACHINE_START(GLANTANK, "GLAN Tank")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= IOP32X_NR_IRQS,
-	.map_io		= glantank_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= glantank_timer_init,
-	.init_machine	= glantank_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/glantank.h b/arch/arm/mach-iop32x/glantank.h
deleted file mode 100644
index f38e86b82c3d..000000000000
--- a/arch/arm/mach-iop32x/glantank.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * IO-Data GLAN Tank board registers
- */
-
-#ifndef __GLANTANK_H
-#define __GLANTANK_H
-
-#define GLANTANK_UART		0xfe800000	/* UART */
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/gpio-iop32x.h b/arch/arm/mach-iop32x/gpio-iop32x.h
deleted file mode 100644
index 20af87e4c5e8..000000000000
--- a/arch/arm/mach-iop32x/gpio-iop32x.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-static struct resource iop32x_gpio_res[] = {
-	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x07c4), 0x10),
-};
-
-static inline void register_iop32x_gpio(void)
-{
-	platform_device_register_simple("gpio-iop", 0,
-					iop32x_gpio_res,
-					ARRAY_SIZE(iop32x_gpio_res));
-}
diff --git a/arch/arm/mach-iop32x/hardware.h b/arch/arm/mach-iop32x/hardware.h
deleted file mode 100644
index 43ab4fb8f9b0..000000000000
--- a/arch/arm/mach-iop32x/hardware.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __HARDWARE_H
-#define __HARDWARE_H
-
-#include <asm/types.h>
-
-/*
- * Note about PCI IO space mappings
- *
- * To make IO space accesses efficient, we store virtual addresses in
- * the IO resources.
- *
- * The PCI IO space is located at virtual 0xfe000000 from physical
- * 0x90000000. The PCI BARs must be programmed with physical addresses,
- * but when we read them, we convert them to virtual addresses. See
- * arch/arm/plat-iop/pci.c.
- */
-
-#ifndef __ASSEMBLY__
-void iop32x_init_irq(void);
-#endif
-
-
-/*
- * Generic chipset bits
- */
-#include "iop3xx.h"
-
-/*
- * Board specific bits
- */
-#include "glantank.h"
-#include "iq80321.h"
-#include "iq31244.h"
-#include "n2100.h"
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/i2c.c b/arch/arm/mach-iop32x/i2c.c
deleted file mode 100644
index e422286af469..000000000000
--- a/arch/arm/mach-iop32x/i2c.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/plat-iop/i2c.c
- *
- * Author: Nicolas Pitre <nico@cam.org>
- * Copyright (C) 2001 MontaVista Software, Inc.
- * Copyright (C) 2004 Intel Corporation.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach/arch.h>
-
-#include "hardware.h"
-#include "iop3xx.h"
-#include "irqs.h"
-
-/*
- * Each of the I2C busses have corresponding GPIO lines, and the driver
- * need to access these directly to drive the bus low at times.
- */
-
-struct gpiod_lookup_table iop3xx_i2c0_gpio_lookup = {
-	.dev_id = "IOP3xx-I2C.0",
-	.table = {
-		GPIO_LOOKUP("gpio-iop", 7, "scl", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-iop", 6, "sda", GPIO_ACTIVE_HIGH),
-		{ }
-	},
-};
-
-struct gpiod_lookup_table iop3xx_i2c1_gpio_lookup = {
-	.dev_id = "IOP3xx-I2C.1",
-	.table = {
-		GPIO_LOOKUP("gpio-iop", 5, "scl", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-iop", 4, "sda", GPIO_ACTIVE_HIGH),
-		{ }
-	},
-};
-
-static struct resource iop3xx_i2c0_resources[] = {
-	[0] = {
-		.start	= 0xfffff680,
-		.end	= 0xfffff697,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_IOP32X_I2C_0,
-		.end	= IRQ_IOP32X_I2C_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device iop3xx_i2c0_device = {
-	.name		= "IOP3xx-I2C",
-	.id		= 0,
-	.num_resources	= 2,
-	.resource	= iop3xx_i2c0_resources,
-};
-
-
-static struct resource iop3xx_i2c1_resources[] = {
-	[0] = {
-		.start	= 0xfffff6a0,
-		.end	= 0xfffff6b7,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_IOP32X_I2C_1,
-		.end	= IRQ_IOP32X_I2C_1,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device iop3xx_i2c1_device = {
-	.name		= "IOP3xx-I2C",
-	.id		= 1,
-	.num_resources	= 2,
-	.resource	= iop3xx_i2c1_resources,
-};
diff --git a/arch/arm/mach-iop32x/iop3xx.h b/arch/arm/mach-iop32x/iop3xx.h
deleted file mode 100644
index a6ec7ebadb35..000000000000
--- a/arch/arm/mach-iop32x/iop3xx.h
+++ /dev/null
@@ -1,326 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Intel IOP32X and IOP33X register definitions
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- */
-
-#ifndef __IOP3XX_H
-#define __IOP3XX_H
-
-/*
- * Peripherals that are shared between the iop32x and iop33x but
- * located at different addresses.
- */
-#define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
-
-#include "iop3xx.h"
-
-/* ATU Parameters
- * set up a 1:1 bus to physical ram relationship
- * w/ physical ram on top of pci in the memory map
- */
-#define IOP32X_MAX_RAM_SIZE            0x40000000UL
-#define IOP3XX_MAX_RAM_SIZE            IOP32X_MAX_RAM_SIZE
-#define IOP3XX_PCI_LOWER_MEM_BA        0x80000000
-
-/*
- * IOP3XX GPIO handling
- */
-#define IOP3XX_GPIO_LINE(x)	(x)
-
-#ifndef __ASSEMBLY__
-extern int init_atu;
-extern int iop3xx_get_init_atu(void);
-#endif
-
-
-/*
- * IOP3XX processor registers
- */
-#define IOP3XX_PERIPHERAL_PHYS_BASE	0xffffe000
-#define IOP3XX_PERIPHERAL_VIRT_BASE	0xfedfe000
-#define IOP3XX_PERIPHERAL_SIZE		0x00002000
-#define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\
-					IOP3XX_PERIPHERAL_SIZE - 1)
-#define IOP3XX_PERIPHERAL_UPPER_VA (IOP3XX_PERIPHERAL_VIRT_BASE +\
-					IOP3XX_PERIPHERAL_SIZE - 1)
-#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) (addr) -\
-					(IOP3XX_PERIPHERAL_PHYS_BASE\
-					- IOP3XX_PERIPHERAL_VIRT_BASE))
-#define IOP3XX_REG_ADDR(reg)		(IOP3XX_PERIPHERAL_VIRT_BASE + (reg))
-
-/* Address Translation Unit  */
-#define IOP3XX_ATUVID		(volatile u16 *)IOP3XX_REG_ADDR(0x0100)
-#define IOP3XX_ATUDID		(volatile u16 *)IOP3XX_REG_ADDR(0x0102)
-#define IOP3XX_ATUCMD		(volatile u16 *)IOP3XX_REG_ADDR(0x0104)
-#define IOP3XX_ATUSR		(volatile u16 *)IOP3XX_REG_ADDR(0x0106)
-#define IOP3XX_ATURID		(volatile u8  *)IOP3XX_REG_ADDR(0x0108)
-#define IOP3XX_ATUCCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0109)
-#define IOP3XX_ATUCLSR		(volatile u8  *)IOP3XX_REG_ADDR(0x010c)
-#define IOP3XX_ATULT		(volatile u8  *)IOP3XX_REG_ADDR(0x010d)
-#define IOP3XX_ATUHTR		(volatile u8  *)IOP3XX_REG_ADDR(0x010e)
-#define IOP3XX_ATUBIST		(volatile u8  *)IOP3XX_REG_ADDR(0x010f)
-#define IOP3XX_IABAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0110)
-#define IOP3XX_IAUBAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0114)
-#define IOP3XX_IABAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0118)
-#define IOP3XX_IAUBAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x011c)
-#define IOP3XX_IABAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0120)
-#define IOP3XX_IAUBAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0124)
-#define IOP3XX_ASVIR		(volatile u16 *)IOP3XX_REG_ADDR(0x012c)
-#define IOP3XX_ASIR		(volatile u16 *)IOP3XX_REG_ADDR(0x012e)
-#define IOP3XX_ERBAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0130)
-#define IOP3XX_ATUILR		(volatile u8  *)IOP3XX_REG_ADDR(0x013c)
-#define IOP3XX_ATUIPR		(volatile u8  *)IOP3XX_REG_ADDR(0x013d)
-#define IOP3XX_ATUMGNT		(volatile u8  *)IOP3XX_REG_ADDR(0x013e)
-#define IOP3XX_ATUMLAT		(volatile u8  *)IOP3XX_REG_ADDR(0x013f)
-#define IOP3XX_IALR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0140)
-#define IOP3XX_IATVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0144)
-#define IOP3XX_ERLR		(volatile u32 *)IOP3XX_REG_ADDR(0x0148)
-#define IOP3XX_ERTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x014c)
-#define IOP3XX_IALR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0150)
-#define IOP3XX_IALR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0154)
-#define IOP3XX_IATVR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0158)
-#define IOP3XX_OIOWTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x015c)
-#define IOP3XX_OMWTVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0160)
-#define IOP3XX_OUMWTVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0164)
-#define IOP3XX_OMWTVR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0168)
-#define IOP3XX_OUMWTVR1		(volatile u32 *)IOP3XX_REG_ADDR(0x016c)
-#define IOP3XX_OUDWTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x0178)
-#define IOP3XX_ATUCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0180)
-#define IOP3XX_PCSR		(volatile u32 *)IOP3XX_REG_ADDR(0x0184)
-#define IOP3XX_ATUISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0188)
-#define IOP3XX_ATUIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x018c)
-#define IOP3XX_IABAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0190)
-#define IOP3XX_IAUBAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0194)
-#define IOP3XX_IALR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0198)
-#define IOP3XX_IATVR3		(volatile u32 *)IOP3XX_REG_ADDR(0x019c)
-#define IOP3XX_OCCAR		(volatile u32 *)IOP3XX_REG_ADDR(0x01a4)
-#define IOP3XX_OCCDR		(volatile u32 *)IOP3XX_REG_ADDR(0x01ac)
-#define IOP3XX_PDSCR		(volatile u32 *)IOP3XX_REG_ADDR(0x01bc)
-#define IOP3XX_PMCAPID		(volatile u8  *)IOP3XX_REG_ADDR(0x01c0)
-#define IOP3XX_PMNEXT		(volatile u8  *)IOP3XX_REG_ADDR(0x01c1)
-#define IOP3XX_APMCR		(volatile u16 *)IOP3XX_REG_ADDR(0x01c2)
-#define IOP3XX_APMCSR		(volatile u16 *)IOP3XX_REG_ADDR(0x01c4)
-#define IOP3XX_PCIXCAPID	(volatile u8  *)IOP3XX_REG_ADDR(0x01e0)
-#define IOP3XX_PCIXNEXT		(volatile u8  *)IOP3XX_REG_ADDR(0x01e1)
-#define IOP3XX_PCIXCMD		(volatile u16 *)IOP3XX_REG_ADDR(0x01e2)
-#define IOP3XX_PCIXSR		(volatile u32 *)IOP3XX_REG_ADDR(0x01e4)
-#define IOP3XX_PCIIRSR		(volatile u32 *)IOP3XX_REG_ADDR(0x01ec)
-#define IOP3XX_PCSR_OUT_Q_BUSY (1 << 15)
-#define IOP3XX_PCSR_IN_Q_BUSY	(1 << 14)
-#define IOP3XX_ATUCR_OUT_EN	(1 << 1)
-
-#define IOP3XX_INIT_ATU_DEFAULT 0
-#define IOP3XX_INIT_ATU_DISABLE -1
-#define IOP3XX_INIT_ATU_ENABLE	 1
-
-/* Messaging Unit  */
-#define IOP3XX_IMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0310)
-#define IOP3XX_IMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0314)
-#define IOP3XX_OMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0318)
-#define IOP3XX_OMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x031c)
-#define IOP3XX_IDR		(volatile u32 *)IOP3XX_REG_ADDR(0x0320)
-#define IOP3XX_IISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0324)
-#define IOP3XX_IIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0328)
-#define IOP3XX_ODR		(volatile u32 *)IOP3XX_REG_ADDR(0x032c)
-#define IOP3XX_OISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0330)
-#define IOP3XX_OIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0334)
-#define IOP3XX_MUCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0350)
-#define IOP3XX_QBAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0354)
-#define IOP3XX_IFHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0360)
-#define IOP3XX_IFTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0364)
-#define IOP3XX_IPHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0368)
-#define IOP3XX_IPTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x036c)
-#define IOP3XX_OFHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0370)
-#define IOP3XX_OFTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0374)
-#define IOP3XX_OPHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0378)
-#define IOP3XX_OPTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x037c)
-#define IOP3XX_IAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0380)
-
-/* DMA Controller  */
-#define IOP3XX_DMA_PHYS_BASE(chan) (IOP3XX_PERIPHERAL_PHYS_BASE + \
-					(0x400 + (chan << 6)))
-#define IOP3XX_DMA_UPPER_PA(chan)  (IOP3XX_DMA_PHYS_BASE(chan) + 0x27)
-
-/* Peripheral bus interface  */
-#define IOP3XX_PBCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0680)
-#define IOP3XX_PBISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0684)
-#define IOP3XX_PBBAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0688)
-#define IOP3XX_PBLR0		(volatile u32 *)IOP3XX_REG_ADDR(0x068c)
-#define IOP3XX_PBBAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0690)
-#define IOP3XX_PBLR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0694)
-#define IOP3XX_PBBAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0698)
-#define IOP3XX_PBLR2		(volatile u32 *)IOP3XX_REG_ADDR(0x069c)
-#define IOP3XX_PBBAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x06a0)
-#define IOP3XX_PBLR3		(volatile u32 *)IOP3XX_REG_ADDR(0x06a4)
-#define IOP3XX_PBBAR4		(volatile u32 *)IOP3XX_REG_ADDR(0x06a8)
-#define IOP3XX_PBLR4		(volatile u32 *)IOP3XX_REG_ADDR(0x06ac)
-#define IOP3XX_PBBAR5		(volatile u32 *)IOP3XX_REG_ADDR(0x06b0)
-#define IOP3XX_PBLR5		(volatile u32 *)IOP3XX_REG_ADDR(0x06b4)
-#define IOP3XX_PMBR0		(volatile u32 *)IOP3XX_REG_ADDR(0x06c0)
-#define IOP3XX_PMBR1		(volatile u32 *)IOP3XX_REG_ADDR(0x06e0)
-#define IOP3XX_PMBR2		(volatile u32 *)IOP3XX_REG_ADDR(0x06e4)
-
-/* Peripheral performance monitoring unit  */
-#define IOP3XX_GTMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0700)
-#define IOP3XX_ESR		(volatile u32 *)IOP3XX_REG_ADDR(0x0704)
-#define IOP3XX_EMISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0708)
-#define IOP3XX_GTSR		(volatile u32 *)IOP3XX_REG_ADDR(0x0710)
-/* PERCR0 DOESN'T EXIST - index from 1! */
-#define IOP3XX_PERCR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0710)
-
-/* Timers  */
-#define IOP3XX_TU_TMR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0000)
-#define IOP3XX_TU_TMR1		(volatile u32 *)IOP3XX_TIMER_REG(0x0004)
-#define IOP3XX_TU_TCR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0008)
-#define IOP3XX_TU_TCR1		(volatile u32 *)IOP3XX_TIMER_REG(0x000c)
-#define IOP3XX_TU_TRR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0010)
-#define IOP3XX_TU_TRR1		(volatile u32 *)IOP3XX_TIMER_REG(0x0014)
-#define IOP3XX_TU_TISR		(volatile u32 *)IOP3XX_TIMER_REG(0x0018)
-#define IOP3XX_TU_WDTCR		(volatile u32 *)IOP3XX_TIMER_REG(0x001c)
-#define IOP_TMR_EN	    0x02
-#define IOP_TMR_RELOAD	    0x04
-#define IOP_TMR_PRIVILEGED 0x08
-#define IOP_TMR_RATIO_1_1  0x00
-
-/* Watchdog timer definitions */
-#define IOP_WDTCR_EN_ARM        0x1e1e1e1e
-#define IOP_WDTCR_EN            0xe1e1e1e1
-/* iop3xx does not support stopping the watchdog, so we just re-arm */
-#define IOP_WDTCR_DIS_ARM	(IOP_WDTCR_EN_ARM)
-#define IOP_WDTCR_DIS		(IOP_WDTCR_EN)
-
-/* Application accelerator unit  */
-#define IOP3XX_AAU_PHYS_BASE (IOP3XX_PERIPHERAL_PHYS_BASE + 0x800)
-#define IOP3XX_AAU_UPPER_PA (IOP3XX_AAU_PHYS_BASE + 0xa7)
-
-/* I2C bus interface unit  */
-#define IOP3XX_ICR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1680)
-#define IOP3XX_ISR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1684)
-#define IOP3XX_ISAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1688)
-#define IOP3XX_IDBR0		(volatile u32 *)IOP3XX_REG_ADDR(0x168c)
-#define IOP3XX_IBMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1694)
-#define IOP3XX_ICR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a0)
-#define IOP3XX_ISR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a4)
-#define IOP3XX_ISAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a8)
-#define IOP3XX_IDBR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16ac)
-#define IOP3XX_IBMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16b4)
-
-
-/*
- * IOP3XX I/O and Mem space regions for PCI autoconfiguration
- */
-#define IOP3XX_PCI_LOWER_MEM_PA	0x80000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE	0x08000000
-
-#define IOP3XX_PCI_LOWER_IO_PA		0x90000000
-#define IOP3XX_PCI_LOWER_IO_BA		0x00000000
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-#include <linux/reboot.h>
-
-void iop3xx_map_io(void);
-void iop_enable_cp6(void);
-void iop_init_cp6_handler(void);
-void iop_init_time(unsigned long tickrate);
-void iop3xx_restart(enum reboot_mode, const char *);
-
-static inline u32 read_tmr0(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c0, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void write_tmr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (val));
-}
-
-static inline void write_tmr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c1, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_tcr0(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c2, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void write_tcr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c2, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_tcr1(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c3, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void write_tcr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c3, c1, 0" : : "r" (val));
-}
-
-static inline void write_trr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val));
-}
-
-static inline void write_trr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c5, c1, 0" : : "r" (val));
-}
-
-static inline void write_tisr(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_wdtcr(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c7, c1, 0":"=r" (val));
-	return val;
-}
-static inline void write_wdtcr(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c7, c1, 0"::"r" (val));
-}
-
-extern unsigned long get_iop_tick_rate(void);
-
-/* only iop13xx has these registers, we define these to present a
- * common register interface for the iop_wdt driver.
- */
-#define IOP_RCSR_WDT	(0)
-static inline u32 read_rcsr(void)
-{
-	return 0;
-}
-static inline void write_wdtsr(u32 val)
-{
-	do { } while (0);
-}
-
-extern struct platform_device iop3xx_dma_0_channel;
-extern struct platform_device iop3xx_dma_1_channel;
-extern struct platform_device iop3xx_aau_channel;
-extern struct platform_device iop3xx_i2c0_device;
-extern struct platform_device iop3xx_i2c1_device;
-extern struct gpiod_lookup_table iop3xx_i2c0_gpio_lookup;
-extern struct gpiod_lookup_table iop3xx_i2c1_gpio_lookup;
-
-#endif
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
deleted file mode 100644
index 8b4c29d17265..000000000000
--- a/arch/arm/mach-iop32x/iq31244.c
+++ /dev/null
@@ -1,333 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/iq31244.c
- *
- * Board support code for the Intel EP80219 and IQ31244 platforms.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright 2003 (c) MontaVista, Software, Inc.
- * Copyright (C) 2004 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/cputype.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "irqs.h"
-#include "gpio-iop32x.h"
-
-/*
- * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
- * same machine id, and the processor type was used to select board type.
- * However this assumption breaks for an iq80219 board which is an iop219
- * processor on an iq31244 board.  The force_ep80219 flag has been added
- * for old boot loaders using the iq31244 machine id for an ep80219 platform.
- */
-static int force_ep80219;
-
-static int is_80219(void)
-{
-	return !!((read_cpuid_id() & 0xffffffe0) == 0x69052e20);
-}
-
-static int is_ep80219(void)
-{
-	if (machine_is_ep80219() || force_ep80219)
-		return 1;
-	else
-		return 0;
-}
-
-
-/*
- * EP80219/IQ31244 timer tick configuration.
- */
-static void __init iq31244_timer_init(void)
-{
-	if (is_ep80219()) {
-		/* 33.333 MHz crystal.  */
-		iop_init_time(200000000);
-	} else {
-		/* 33.000 MHz crystal.  */
-		iop_init_time(198000000);
-	}
-}
-
-
-/*
- * IQ31244 I/O.
- */
-static struct map_desc iq31244_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= IQ31244_UART,
-		.pfn		= __phys_to_pfn(IQ31244_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init iq31244_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
-}
-
-
-/*
- * EP80219/IQ31244 PCI.
- */
-static int __init
-ep80219_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if (slot == 0) {
-		/* CFlash */
-		irq = IRQ_IOP32X_XINT1;
-	} else if (slot == 1) {
-		/* 82551 Pro 100 */
-		irq = IRQ_IOP32X_XINT0;
-	} else if (slot == 2) {
-		/* PCI-X Slot */
-		irq = IRQ_IOP32X_XINT3;
-	} else if (slot == 3) {
-		/* SATA */
-		irq = IRQ_IOP32X_XINT2;
-	} else {
-		printk(KERN_ERR "ep80219_pci_map_irq() called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci ep80219_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= ep80219_pci_map_irq,
-};
-
-static int __init
-iq31244_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if (slot == 0) {
-		/* CFlash */
-		irq = IRQ_IOP32X_XINT1;
-	} else if (slot == 1) {
-		/* SATA */
-		irq = IRQ_IOP32X_XINT2;
-	} else if (slot == 2) {
-		/* PCI-X Slot */
-		irq = IRQ_IOP32X_XINT3;
-	} else if (slot == 3) {
-		/* 82546 GigE */
-		irq = IRQ_IOP32X_XINT0;
-	} else {
-		printk(KERN_ERR "iq31244_pci_map_irq called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci iq31244_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= iq31244_pci_map_irq,
-};
-
-static int __init iq31244_pci_init(void)
-{
-	if (is_ep80219())
-		pci_common_init(&ep80219_pci);
-	else if (machine_is_iq31244()) {
-		if (is_80219()) {
-			printk("note: iq31244 board type has been selected\n");
-			printk("note: to select ep80219 operation:\n");
-			printk("\t1/ specify \"force_ep80219\" on the kernel"
-				" command line\n");
-			printk("\t2/ update boot loader to pass"
-				" the ep80219 id: %d\n", MACH_TYPE_EP80219);
-		}
-		pci_common_init(&iq31244_pci);
-	}
-
-	return 0;
-}
-
-subsys_initcall(iq31244_pci_init);
-
-
-/*
- * IQ31244 machine initialisation.
- */
-static struct physmap_flash_data iq31244_flash_data = {
-	.width		= 2,
-};
-
-static struct resource iq31244_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf07fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq31244_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &iq31244_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &iq31244_flash_resource,
-};
-
-static struct plat_serial8250_port iq31244_serial_port[] = {
-	{
-		.mapbase	= IQ31244_UART,
-		.membase	= (char *)IQ31244_UART,
-		.irq		= IRQ_IOP32X_XINT1,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource iq31244_uart_resource = {
-	.start		= IQ31244_UART,
-	.end		= IQ31244_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq31244_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= iq31244_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &iq31244_uart_resource,
-};
-
-/*
- * This function will send a SHUTDOWN_COMPLETE message to the PIC
- * controller over I2C.  We are not using the i2c subsystem since
- * we are going to power off and it may be removed
- */
-void ep80219_power_off(void)
-{
-	/*
-	 * Send the Address byte w/ the start condition
-	 */
-	*IOP3XX_IDBR1 = 0x60;
-	*IOP3XX_ICR1 = 0xE9;
-	mdelay(1);
-
-	/*
-	 * Send the START_MSG byte w/ no start or stop condition
-	 */
-	*IOP3XX_IDBR1 = 0x0F;
-	*IOP3XX_ICR1 = 0xE8;
-	mdelay(1);
-
-	/*
-	 * Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or
-	 * stop condition
-	 */
-	*IOP3XX_IDBR1 = 0x03;
-	*IOP3XX_ICR1 = 0xE8;
-	mdelay(1);
-
-	/*
-	 * Send an ignored byte w/ stop condition
-	 */
-	*IOP3XX_IDBR1 = 0x00;
-	*IOP3XX_ICR1 = 0xEA;
-
-	while (1)
-		;
-}
-
-static void __init iq31244_init_machine(void)
-{
-	register_iop32x_gpio();
-	gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
-	gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&iq31244_flash_device);
-	platform_device_register(&iq31244_serial_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-
-	if (is_ep80219())
-		pm_power_off = ep80219_power_off;
-
-	if (!is_80219())
-		platform_device_register(&iop3xx_aau_channel);
-}
-
-static int __init force_ep80219_setup(char *str)
-{
-	force_ep80219 = 1;
-	return 1;
-}
-
-__setup("force_ep80219", force_ep80219_setup);
-
-MACHINE_START(IQ31244, "Intel IQ31244")
-	/* Maintainer: Intel Corp. */
-	.atag_offset	= 0x100,
-	.map_io		= iq31244_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= iq31244_timer_init,
-	.init_machine	= iq31244_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
-
-/* There should have been an ep80219 machine identifier from the beginning.
- * Boot roms older than March 2007 do not know the ep80219 machine id.  Pass
- * "force_ep80219" on the kernel command line, otherwise iq31244 operation
- * will be selected.
- */
-MACHINE_START(EP80219, "Intel EP80219")
-	/* Maintainer: Intel Corp. */
-	.atag_offset	= 0x100,
-	.nr_irqs	= IOP32X_NR_IRQS,
-	.map_io		= iq31244_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= iq31244_timer_init,
-	.init_machine	= iq31244_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq31244.h b/arch/arm/mach-iop32x/iq31244.h
deleted file mode 100644
index a7ac691e48d3..000000000000
--- a/arch/arm/mach-iop32x/iq31244.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Intel IQ31244 evaluation board registers
- */
-
-#ifndef __IQ31244_H
-#define __IQ31244_H
-
-#define IQ31244_UART		0xfe800000	/* UART #1 */
-#define IQ31244_7SEG_1		0xfe840000	/* 7-Segment MSB */
-#define IQ31244_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
-#define IQ31244_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
-#define IQ31244_BATT_STAT	0xfe8f0000	/* Battery Status */
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
deleted file mode 100644
index d9780c4660cb..000000000000
--- a/arch/arm/mach-iop32x/iq80321.c
+++ /dev/null
@@ -1,192 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/iq80321.c
- *
- * Board support code for the Intel IQ80321 platform.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "irqs.h"
-#include "gpio-iop32x.h"
-
-/*
- * IQ80321 timer tick configuration.
- */
-static void __init iq80321_timer_init(void)
-{
-	/* 33.333 MHz crystal.  */
-	iop_init_time(200000000);
-}
-
-
-/*
- * IQ80321 I/O.
- */
-static struct map_desc iq80321_io_desc[] __initdata = {
- 	{	/* on-board devices */
-		.virtual	= IQ80321_UART,
-		.pfn		= __phys_to_pfn(IQ80321_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init iq80321_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc));
-}
-
-
-/*
- * IQ80321 PCI.
- */
-static int __init
-iq80321_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if ((slot == 2 || slot == 6) && pin == 1) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP32X_XINT2;
-	} else if ((slot == 2 || slot == 6) && pin == 2) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP32X_XINT3;
-	} else if ((slot == 2 || slot == 6) && pin == 3) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP32X_XINT0;
-	} else if ((slot == 2 || slot == 6) && pin == 4) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP32X_XINT1;
-	} else if (slot == 4 || slot == 8) {
-		/* Gig-E */
-		irq = IRQ_IOP32X_XINT0;
-	} else {
-		printk(KERN_ERR "iq80321_pci_map_irq() called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci iq80321_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit_cond,
-	.map_irq	= iq80321_pci_map_irq,
-};
-
-static int __init iq80321_pci_init(void)
-{
-	if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
-		machine_is_iq80321())
-		pci_common_init(&iq80321_pci);
-
-	return 0;
-}
-
-subsys_initcall(iq80321_pci_init);
-
-
-/*
- * IQ80321 machine initialisation.
- */
-static struct physmap_flash_data iq80321_flash_data = {
-	.width		= 1,
-};
-
-static struct resource iq80321_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf07fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq80321_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &iq80321_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &iq80321_flash_resource,
-};
-
-static struct plat_serial8250_port iq80321_serial_port[] = {
-	{
-		.mapbase	= IQ80321_UART,
-		.membase	= (char *)IQ80321_UART,
-		.irq		= IRQ_IOP32X_XINT1,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource iq80321_uart_resource = {
-	.start		= IQ80321_UART,
-	.end		= IQ80321_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq80321_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= iq80321_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &iq80321_uart_resource,
-};
-
-static void __init iq80321_init_machine(void)
-{
-	register_iop32x_gpio();
-	gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
-	gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&iq80321_flash_device);
-	platform_device_register(&iq80321_serial_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-	platform_device_register(&iop3xx_aau_channel);
-}
-
-MACHINE_START(IQ80321, "Intel IQ80321")
-	/* Maintainer: Intel Corp. */
-	.atag_offset	= 0x100,
-	.nr_irqs	= IOP32X_NR_IRQS,
-	.map_io		= iq80321_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= iq80321_timer_init,
-	.init_machine	= iq80321_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq80321.h b/arch/arm/mach-iop32x/iq80321.h
deleted file mode 100644
index 3a5d10626ea6..000000000000
--- a/arch/arm/mach-iop32x/iq80321.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Intel IQ80321 evaluation board registers
- */
-
-#ifndef __IQ80321_H
-#define __IQ80321_H
-
-#define IQ80321_UART		0xfe800000	/* UART #1 */
-#define IQ80321_7SEG_1		0xfe840000	/* 7-Segment MSB */
-#define IQ80321_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
-#define IQ80321_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
-#define IQ80321_BATT_STAT	0xfe8f0000	/* Battery Status */
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
deleted file mode 100644
index 6dca7e97d81f..000000000000
--- a/arch/arm/mach-iop32x/irq.c
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-iop32x/irq.c
- *
- * Generic IOP32X IRQ handling functionality
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "hardware.h"
-
-static u32 iop32x_mask;
-
-static void intctl_write(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
-}
-
-static void intstr_write(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val));
-}
-
-static u32 iintsrc_read(void)
-{
-	int irq;
-
-	asm volatile("mrc p6, 0, %0, c8, c0, 0" : "=r" (irq));
-
-	return irq;
-}
-
-static void
-iop32x_irq_mask(struct irq_data *d)
-{
-	iop32x_mask &= ~(1 << (d->irq - 1));
-	intctl_write(iop32x_mask);
-}
-
-static void
-iop32x_irq_unmask(struct irq_data *d)
-{
-	iop32x_mask |= 1 << (d->irq - 1);
-	intctl_write(iop32x_mask);
-}
-
-struct irq_chip ext_chip = {
-	.name		= "IOP32x",
-	.irq_ack	= iop32x_irq_mask,
-	.irq_mask	= iop32x_irq_mask,
-	.irq_unmask	= iop32x_irq_unmask,
-};
-
-static void iop_handle_irq(struct pt_regs *regs)
-{
-	u32 mask;
-
-	iop_enable_cp6();
-
-	do {
-		mask = iintsrc_read();
-		if (mask)
-			generic_handle_irq(fls(mask));
-	} while (mask);
-}
-
-void __init iop32x_init_irq(void)
-{
-	int i;
-
-	iop_init_cp6_handler();
-	set_handle_irq(iop_handle_irq);
-
-	intctl_write(0);
-	intstr_write(0);
-	if (machine_is_glantank() ||
-	    machine_is_iq80321() ||
-	    machine_is_iq31244() ||
-	    machine_is_n2100() ||
-	    machine_is_em7210())
-		*IOP3XX_PCIIRSR = 0x0f;
-
-	for (i = 1; i < NR_IRQS; i++) {
-		irq_set_chip_and_handler(i, &ext_chip, handle_level_irq);
-		irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
-}
diff --git a/arch/arm/mach-iop32x/irqs.h b/arch/arm/mach-iop32x/irqs.h
deleted file mode 100644
index e9fc88e09189..000000000000
--- a/arch/arm/mach-iop32x/irqs.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Author:	Rory Bolt <rorybolt@pacbell.net>
- * Copyright:	(C) 2002 Rory Bolt
- */
-
-#ifndef __IOP32X_IRQS_H
-#define __IOP32X_IRQS_H
-
-/* Interrupts in Linux start at 1, hardware starts at 0 */
-
-#define IOP_IRQ(x) ((x) + 1)
-
-/*
- * IOP80321 chipset interrupts
- */
-#define IRQ_IOP32X_DMA0_EOT	IOP_IRQ(0)
-#define IRQ_IOP32X_DMA0_EOC	IOP_IRQ(1)
-#define IRQ_IOP32X_DMA1_EOT	IOP_IRQ(2)
-#define IRQ_IOP32X_DMA1_EOC	IOP_IRQ(3)
-#define IRQ_IOP32X_AA_EOT	IOP_IRQ(6)
-#define IRQ_IOP32X_AA_EOC	IOP_IRQ(7)
-#define IRQ_IOP32X_CORE_PMON	IOP_IRQ(8)
-#define IRQ_IOP32X_TIMER0	IOP_IRQ(9)
-#define IRQ_IOP32X_TIMER1	IOP_IRQ(10)
-#define IRQ_IOP32X_I2C_0	IOP_IRQ(11)
-#define IRQ_IOP32X_I2C_1	IOP_IRQ(12)
-#define IRQ_IOP32X_MESSAGING	IOP_IRQ(13)
-#define IRQ_IOP32X_ATU_BIST	IOP_IRQ(14)
-#define IRQ_IOP32X_PERFMON	IOP_IRQ(15)
-#define IRQ_IOP32X_CORE_PMU	IOP_IRQ(16)
-#define IRQ_IOP32X_BIU_ERR	IOP_IRQ(17)
-#define IRQ_IOP32X_ATU_ERR	IOP_IRQ(18)
-#define IRQ_IOP32X_MCU_ERR	IOP_IRQ(19)
-#define IRQ_IOP32X_DMA0_ERR	IOP_IRQ(20)
-#define IRQ_IOP32X_DMA1_ERR	IOP_IRQ(21)
-#define IRQ_IOP32X_AA_ERR	IOP_IRQ(23)
-#define IRQ_IOP32X_MSG_ERR	IOP_IRQ(24)
-#define IRQ_IOP32X_SSP		IOP_IRQ(25)
-#define IRQ_IOP32X_XINT0	IOP_IRQ(27)
-#define IRQ_IOP32X_XINT1	IOP_IRQ(28)
-#define IRQ_IOP32X_XINT2	IOP_IRQ(29)
-#define IRQ_IOP32X_XINT3	IOP_IRQ(30)
-#define IRQ_IOP32X_HPI		IOP_IRQ(31)
-
-#define IOP32X_NR_IRQS		(IRQ_IOP32X_HPI + 1)
-
-#endif
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
deleted file mode 100644
index bb1e2e11bf35..000000000000
--- a/arch/arm/mach-iop32x/n2100.c
+++ /dev/null
@@ -1,367 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/n2100.c
- *
- * Board support code for the Thecus N2100 platform.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright 2003 (c) MontaVista, Software, Inc.
- * Copyright (C) 2004 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/f75375s.h>
-#include <linux/leds-pca9532.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "irqs.h"
-#include "gpio-iop32x.h"
-
-/*
- * N2100 timer tick configuration.
- */
-static void __init n2100_timer_init(void)
-{
-	/* 33.000 MHz crystal.  */
-	iop_init_time(198000000);
-}
-
-
-/*
- * N2100 I/O.
- */
-static struct map_desc n2100_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= N2100_UART,
-		.pfn		= __phys_to_pfn(N2100_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init n2100_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(n2100_io_desc, ARRAY_SIZE(n2100_io_desc));
-}
-
-
-/*
- * N2100 PCI.
- */
-static int n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if (PCI_SLOT(dev->devfn) == 1) {
-		/* RTL8110SB #1 */
-		irq = IRQ_IOP32X_XINT0;
-	} else if (PCI_SLOT(dev->devfn) == 2) {
-		/* RTL8110SB #2 */
-		irq = IRQ_IOP32X_XINT3;
-	} else if (PCI_SLOT(dev->devfn) == 3) {
-		/* Sil3512 */
-		irq = IRQ_IOP32X_XINT2;
-	} else if (PCI_SLOT(dev->devfn) == 4 && pin == 1) {
-		/* VT6212 INTA */
-		irq = IRQ_IOP32X_XINT1;
-	} else if (PCI_SLOT(dev->devfn) == 4 && pin == 2) {
-		/* VT6212 INTB */
-		irq = IRQ_IOP32X_XINT0;
-	} else if (PCI_SLOT(dev->devfn) == 4 && pin == 3) {
-		/* VT6212 INTC */
-		irq = IRQ_IOP32X_XINT2;
-	} else if (PCI_SLOT(dev->devfn) == 5) {
-		/* Mini-PCI slot */
-		irq = IRQ_IOP32X_XINT3;
-	} else {
-		printk(KERN_ERR "n2100_pci_map_irq() called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci n2100_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= n2100_pci_map_irq,
-};
-
-/*
- * Both r8169 chips on the n2100 exhibit PCI parity problems.  Turn
- * off parity reporting for both ports so we don't get error interrupts
- * for them.
- */
-static void n2100_fixup_r8169(struct pci_dev *dev)
-{
-	if (dev->bus->number == 0 &&
-	    (dev->devfn == PCI_DEVFN(1, 0) ||
-	     dev->devfn == PCI_DEVFN(2, 0)))
-		pci_disable_parity(dev);
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, PCI_ANY_ID, n2100_fixup_r8169);
-
-static int __init n2100_pci_init(void)
-{
-	if (machine_is_n2100())
-		pci_common_init(&n2100_pci);
-
-	return 0;
-}
-
-subsys_initcall(n2100_pci_init);
-
-
-/*
- * N2100 machine initialisation.
- */
-static struct physmap_flash_data n2100_flash_data = {
-	.width		= 2,
-};
-
-static struct resource n2100_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf0ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device n2100_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &n2100_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &n2100_flash_resource,
-};
-
-
-static struct plat_serial8250_port n2100_serial_port[] = {
-	{
-		.mapbase	= N2100_UART,
-		.membase	= (char *)N2100_UART,
-		.irq		= 0,
-		.flags		= UPF_SKIP_TEST | UPF_AUTO_IRQ | UPF_SHARE_IRQ,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource n2100_uart_resource = {
-	.start		= N2100_UART,
-	.end		= N2100_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device n2100_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= n2100_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &n2100_uart_resource,
-};
-
-static struct f75375s_platform_data n2100_f75375s = {
-	.pwm		= { 255, 255 },
-	.pwm_enable = { 0, 0 },
-};
-
-static struct pca9532_platform_data n2100_leds = {
-	.leds = {
-	{	.name = "n2100:red:satafail0",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{	.name = "n2100:red:satafail1",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{	.name = "n2100:blue:usb",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{ 	.type = PCA9532_TYPE_NONE },
-
-	{ 	.type = PCA9532_TYPE_NONE },
-	{ 	.type = PCA9532_TYPE_NONE },
-	{ 	.type = PCA9532_TYPE_NONE },
-	{	.name = "n2100:red:usb",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-
-	{	.type = PCA9532_TYPE_NONE }, /* power OFF gpio */
-	{	.type = PCA9532_TYPE_NONE }, /* reset gpio */
-	{	.type = PCA9532_TYPE_NONE },
-	{	.type = PCA9532_TYPE_NONE },
-
-	{	.type = PCA9532_TYPE_NONE },
-	{	.name = "n2100:orange:system",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{	.name = "n2100:red:system",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{	.name = "N2100 beeper"  ,
-		.state =  PCA9532_OFF,
-		.type = PCA9532_TYPE_N2100_BEEP,
-	},
-	},
-	.psc = { 0, 0 },
-	.pwm = { 0, 0 },
-};
-
-static struct i2c_board_info __initdata n2100_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372b", 0x32),
-	},
-	{
-		I2C_BOARD_INFO("f75375", 0x2e),
-		.platform_data = &n2100_f75375s,
-	},
-	{
-		I2C_BOARD_INFO("pca9532", 0x60),
-		.platform_data = &n2100_leds,
-	},
-};
-
-/*
- * Pull PCA9532 GPIO #8 low to power off the machine.
- */
-static void n2100_power_off(void)
-{
-	local_irq_disable();
-
-	/* Start condition, I2C address of PCA9532, write transaction.  */
-	*IOP3XX_IDBR0 = 0xc0;
-	*IOP3XX_ICR0 = 0xe9;
-	mdelay(1);
-
-	/* Write address 0x08.  */
-	*IOP3XX_IDBR0 = 0x08;
-	*IOP3XX_ICR0 = 0xe8;
-	mdelay(1);
-
-	/* Write data 0x01, stop condition.  */
-	*IOP3XX_IDBR0 = 0x01;
-	*IOP3XX_ICR0 = 0xea;
-
-	while (1)
-		;
-}
-
-static void n2100_restart(enum reboot_mode mode, const char *cmd)
-{
-	int ret;
-
-	ret = gpio_direction_output(N2100_HARDWARE_RESET, 0);
-	if (ret) {
-		pr_crit("could not drive reset GPIO low\n");
-		return;
-	}
-	/* Wait for reset to happen */
-	while (1)
-		;
-}
-
-
-static struct timer_list power_button_poll_timer;
-
-static void power_button_poll(struct timer_list *unused)
-{
-	if (gpio_get_value(N2100_POWER_BUTTON) == 0) {
-		ctrl_alt_del();
-		return;
-	}
-
-	power_button_poll_timer.expires = jiffies + (HZ / 10);
-	add_timer(&power_button_poll_timer);
-}
-
-static int __init n2100_request_gpios(void)
-{
-	int ret;
-
-	if (!machine_is_n2100())
-		return 0;
-
-	ret = gpio_request(N2100_HARDWARE_RESET, "reset");
-	if (ret)
-		pr_err("could not request reset GPIO\n");
-
-	ret = gpio_request(N2100_POWER_BUTTON, "power");
-	if (ret)
-		pr_err("could not request power GPIO\n");
-	else {
-		ret = gpio_direction_input(N2100_POWER_BUTTON);
-		if (ret)
-			pr_err("could not set power GPIO as input\n");
-	}
-	/* Set up power button poll timer */
-	timer_setup(&power_button_poll_timer, power_button_poll, 0);
-	power_button_poll_timer.expires = jiffies + (HZ / 10);
-	add_timer(&power_button_poll_timer);
-	return 0;
-}
-device_initcall(n2100_request_gpios);
-
-static void __init n2100_init_machine(void)
-{
-	register_iop32x_gpio();
-	gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&n2100_flash_device);
-	platform_device_register(&n2100_serial_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-
-	i2c_register_board_info(0, n2100_i2c_devices,
-		ARRAY_SIZE(n2100_i2c_devices));
-
-	pm_power_off = n2100_power_off;
-}
-
-MACHINE_START(N2100, "Thecus N2100")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= IOP32X_NR_IRQS,
-	.map_io		= n2100_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= n2100_timer_init,
-	.init_machine	= n2100_init_machine,
-	.restart	= n2100_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/n2100.h b/arch/arm/mach-iop32x/n2100.h
deleted file mode 100644
index 0b97b940d3e7..000000000000
--- a/arch/arm/mach-iop32x/n2100.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Thecus N2100 board registers
- */
-
-#ifndef __N2100_H
-#define __N2100_H
-
-#define N2100_UART		0xfe800000	/* UART */
-
-#define N2100_COPY_BUTTON	IOP3XX_GPIO_LINE(0)
-#define N2100_PCA9532_RESET	IOP3XX_GPIO_LINE(2)
-#define N2100_RESET_BUTTON	IOP3XX_GPIO_LINE(3)
-#define N2100_HARDWARE_RESET	IOP3XX_GPIO_LINE(4)
-#define N2100_POWER_BUTTON	IOP3XX_GPIO_LINE(5)
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/pci.c b/arch/arm/mach-iop32x/pci.c
deleted file mode 100644
index 7a215d2ee7e2..000000000000
--- a/arch/arm/mach-iop32x/pci.c
+++ /dev/null
@@ -1,404 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/plat-iop/pci.c
- *
- * PCI support for the Intel IOP32X and IOP33X processors
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/signal.h>
-#include <asm/mach/pci.h>
-#include "hardware.h"
-#include "iop3xx.h"
-
-// #define DEBUG
-
-#ifdef DEBUG
-#define  DBG(x...) printk(x)
-#else
-#define  DBG(x...) do { } while (0)
-#endif
-
-/*
- * This routine builds either a type0 or type1 configuration command.  If the
- * bus is on the 803xx then a type0 made, else a type1 is created.
- */
-static u32 iop3xx_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
-	struct pci_sys_data *sys = bus->sysdata;
-	u32 addr;
-
-	if (sys->busnr == bus->number)
-		addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
-	else
-		addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
-
-	addr |=	PCI_FUNC(devfn) << 8 | (where & ~3);
-
-	return addr;
-}
-
-/*
- * This routine checks the status of the last configuration cycle.  If an error
- * was detected it returns a 1, else it returns a 0.  The errors being checked
- * are parity, master abort, target abort (master and target).  These types of
- * errors occur during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop3xx_pci_status(void)
-{
-	unsigned int status;
-	int ret = 0;
-
-	/*
-	 * Check the status registers.
-	 */
-	status = *IOP3XX_ATUSR;
-	if (status & 0xf900) {
-		DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
-		*IOP3XX_ATUSR = status & 0xf900;
-		ret = 1;
-	}
-
-	status = *IOP3XX_ATUISR;
-	if (status & 0x679f) {
-		DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
-		*IOP3XX_ATUISR = status & 0x679f;
-		ret = 1;
-	}
-
-	return ret;
-}
-
-/*
- * Simply write the address register and read the configuration
- * data.  Note that the 4 nops ensure that we are able to handle
- * a delayed abort (in theory.)
- */
-static u32 iop3xx_read(unsigned long addr)
-{
-	u32 val;
-
-	__asm__ __volatile__(
-		"str	%1, [%2]\n\t"
-		"ldr	%0, [%3]\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		: "=r" (val)
-		: "r" (addr), "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
-
-	return val;
-}
-
-/*
- * The read routines must check the error status of the last configuration
- * cycle.  If there was an error, the routine returns all hex f's.
- */
-static int
-iop3xx_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 *value)
-{
-	unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
-	u32 val = iop3xx_read(addr) >> ((where & 3) * 8);
-
-	if (iop3xx_pci_status())
-		val = 0xffffffff;
-
-	*value = val;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop3xx_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 value)
-{
-	unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
-	u32 val;
-
-	if (size != 4) {
-		val = iop3xx_read(addr);
-		if (iop3xx_pci_status())
-			return PCIBIOS_SUCCESSFUL;
-
-		where = (where & 3) * 8;
-
-		if (size == 1)
-			val &= ~(0xff << where);
-		else
-			val &= ~(0xffff << where);
-
-		*IOP3XX_OCCDR = val | value << where;
-	} else {
-		asm volatile(
-			"str	%1, [%2]\n\t"
-			"str	%0, [%3]\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			:
-			: "r" (value), "r" (addr),
-			  "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops iop3xx_ops = {
-	.read	= iop3xx_read_config,
-	.write	= iop3xx_write_config,
-};
-
-/*
- * When a PCI device does not exist during config cycles, the 80200 gets a
- * bus error instead of returning 0xffffffff. This handler simply returns.
- */
-static int
-iop3xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
-		addr, fsr, regs->ARM_pc, regs->ARM_lr);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-	struct resource realio;
-
-	if (nr != 0)
-		return 0;
-
-	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
-	if (!res)
-		panic("PCI: unable to alloc resources");
-
-	res->start = IOP3XX_PCI_LOWER_MEM_PA;
-	res->end   = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1;
-	res->name  = "IOP3XX PCI Memory Space";
-	res->flags = IORESOURCE_MEM;
-	request_resource(&iomem_resource, res);
-
-	/*
-	 * Use whatever translation is already setup.
-	 */
-	sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0;
-
-	pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
-
-	realio.start = 0;
-	realio.end = realio.start + SZ_64K - 1;
-	pci_remap_iospace(&realio, IOP3XX_PCI_LOWER_IO_PA);
-
-	return 1;
-}
-
-void __init iop3xx_atu_setup(void)
-{
-	/* BAR 0 ( Disabled ) */
-	*IOP3XX_IAUBAR0 = 0x0;
-	*IOP3XX_IABAR0  = 0x0;
-	*IOP3XX_IATVR0  = 0x0;
-	*IOP3XX_IALR0   = 0x0;
-
-	/* BAR 1 ( Disabled ) */
-	*IOP3XX_IAUBAR1 = 0x0;
-	*IOP3XX_IABAR1  = 0x0;
-	*IOP3XX_IALR1   = 0x0;
-
-	/* BAR 2 (1:1 mapping with Physical RAM) */
-	/* Set limit and enable */
-	*IOP3XX_IALR2 = ~((u32)IOP3XX_MAX_RAM_SIZE - 1) & ~0x1;
-	*IOP3XX_IAUBAR2 = 0x0;
-
-	/* Align the inbound bar with the base of memory */
-	*IOP3XX_IABAR2 = PHYS_OFFSET |
-			       PCI_BASE_ADDRESS_MEM_TYPE_64 |
-			       PCI_BASE_ADDRESS_MEM_PREFETCH;
-
-	*IOP3XX_IATVR2 = PHYS_OFFSET;
-
-	/* Outbound window 0 */
-	*IOP3XX_OMWTVR0 = IOP3XX_PCI_LOWER_MEM_BA;
-	*IOP3XX_OUMWTVR0 = 0;
-
-	/* Outbound window 1 */
-	*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA +
-			  IOP3XX_PCI_MEM_WINDOW_SIZE / 2;
-	*IOP3XX_OUMWTVR1 = 0;
-
-	/* BAR 3 ( Disabled ) */
-	*IOP3XX_IAUBAR3 = 0x0;
-	*IOP3XX_IABAR3  = 0x0;
-	*IOP3XX_IATVR3  = 0x0;
-	*IOP3XX_IALR3   = 0x0;
-
-	/* Setup the I/O Bar
-	 */
-	*IOP3XX_OIOWTVR = IOP3XX_PCI_LOWER_IO_BA;
-
-	/* Enable inbound and outbound cycles
-	 */
-	*IOP3XX_ATUCMD |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
-			       PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-	*IOP3XX_ATUCR |= IOP3XX_ATUCR_OUT_EN;
-}
-
-void __init iop3xx_atu_disable(void)
-{
-	*IOP3XX_ATUCMD = 0;
-	*IOP3XX_ATUCR = 0;
-
-	/* wait for cycles to quiesce */
-	while (*IOP3XX_PCSR & (IOP3XX_PCSR_OUT_Q_BUSY |
-				     IOP3XX_PCSR_IN_Q_BUSY))
-		cpu_relax();
-
-	/* BAR 0 ( Disabled ) */
-	*IOP3XX_IAUBAR0 = 0x0;
-	*IOP3XX_IABAR0  = 0x0;
-	*IOP3XX_IATVR0  = 0x0;
-	*IOP3XX_IALR0   = 0x0;
-
-	/* BAR 1 ( Disabled ) */
-	*IOP3XX_IAUBAR1 = 0x0;
-	*IOP3XX_IABAR1  = 0x0;
-	*IOP3XX_IALR1   = 0x0;
-
-	/* BAR 2 ( Disabled ) */
-	*IOP3XX_IAUBAR2 = 0x0;
-	*IOP3XX_IABAR2  = 0x0;
-	*IOP3XX_IATVR2  = 0x0;
-	*IOP3XX_IALR2   = 0x0;
-
-	/* BAR 3 ( Disabled ) */
-	*IOP3XX_IAUBAR3 = 0x0;
-	*IOP3XX_IABAR3  = 0x0;
-	*IOP3XX_IATVR3  = 0x0;
-	*IOP3XX_IALR3   = 0x0;
-
-	/* Clear the outbound windows */
-	*IOP3XX_OIOWTVR  = 0;
-
-	/* Outbound window 0 */
-	*IOP3XX_OMWTVR0 = 0;
-	*IOP3XX_OUMWTVR0 = 0;
-
-	/* Outbound window 1 */
-	*IOP3XX_OMWTVR1 = 0;
-	*IOP3XX_OUMWTVR1 = 0;
-}
-
-/* Flag to determine whether the ATU is initialized and the PCI bus scanned */
-int init_atu;
-
-int iop3xx_get_init_atu(void) {
-	/* check if default has been overridden */
-	if (init_atu != IOP3XX_INIT_ATU_DEFAULT)
-		return init_atu;
-	else
-		return IOP3XX_INIT_ATU_DISABLE;
-}
-
-static void __init iop3xx_atu_debug(void)
-{
-	DBG("PCI: Intel IOP3xx PCI init.\n");
-	DBG("PCI: Outbound memory window 0: PCI 0x%08x%08x\n",
-		*IOP3XX_OUMWTVR0, *IOP3XX_OMWTVR0);
-	DBG("PCI: Outbound memory window 1: PCI 0x%08x%08x\n",
-		*IOP3XX_OUMWTVR1, *IOP3XX_OMWTVR1);
-	DBG("PCI: Outbound IO window: PCI 0x%08x\n",
-		*IOP3XX_OIOWTVR);
-
-	DBG("PCI: Inbound memory window 0: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
-		*IOP3XX_IAUBAR0, *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0);
-	DBG("PCI: Inbound memory window 1: PCI 0x%08x%08x 0x%08x\n",
-		*IOP3XX_IAUBAR1, *IOP3XX_IABAR1, *IOP3XX_IALR1);
-	DBG("PCI: Inbound memory window 2: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
-		*IOP3XX_IAUBAR2, *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2);
-	DBG("PCI: Inbound memory window 3: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
-		*IOP3XX_IAUBAR3, *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3);
-
-	DBG("PCI: Expansion ROM window: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
-		0, *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR);
-
-	DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD);
-	DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR);
-
-	hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, 0, "imprecise external abort");
-}
-
-/* for platforms that might be host-bus-adapters */
-void __init iop3xx_pci_preinit_cond(void)
-{
-	if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) {
-		iop3xx_atu_disable();
-		iop3xx_atu_setup();
-		iop3xx_atu_debug();
-	}
-}
-
-void __init iop3xx_pci_preinit(void)
-{
-	pcibios_min_mem = 0;
-
-	iop3xx_atu_disable();
-	iop3xx_atu_setup();
-	iop3xx_atu_debug();
-}
-
-/* allow init_atu to be user overridden */
-static int __init iop3xx_init_atu_setup(char *str)
-{
-	init_atu = IOP3XX_INIT_ATU_DEFAULT;
-	if (str) {
-		while (*str != '\0') {
-			switch (*str) {
-			case 'y':
-			case 'Y':
-				init_atu = IOP3XX_INIT_ATU_ENABLE;
-				break;
-			case 'n':
-			case 'N':
-				init_atu = IOP3XX_INIT_ATU_DISABLE;
-				break;
-			case ',':
-			case '=':
-				break;
-			default:
-				printk(KERN_DEBUG "\"%s\" malformed at "
-					    "character: \'%c\'",
-					    __func__,
-					    *str);
-				*(str + 1) = '\0';
-			}
-			str++;
-		}
-	}
-
-	return 1;
-}
-
-__setup("iop3xx_init_atu", iop3xx_init_atu_setup);
-
diff --git a/arch/arm/mach-iop32x/pmu.c b/arch/arm/mach-iop32x/pmu.c
deleted file mode 100644
index bdbc7a3cb8a3..000000000000
--- a/arch/arm/mach-iop32x/pmu.c
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * PMU IRQ registration for the iop3xx xscale PMU families.
- * Copyright (C) 2010 Will Deacon, ARM Ltd.
- */
-
-#include <linux/platform_device.h>
-#include "irqs.h"
-
-static struct resource pmu_resource = {
-	.start	= IRQ_IOP32X_CORE_PMU,
-	.end	= IRQ_IOP32X_CORE_PMU,
-	.flags	= IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
-	.name		= "xscale-pmu",
-	.id		= -1,
-	.resource	= &pmu_resource,
-	.num_resources	= 1,
-};
-
-static int __init iop3xx_pmu_init(void)
-{
-	platform_device_register(&pmu_device);
-	return 0;
-}
-
-arch_initcall(iop3xx_pmu_init);
diff --git a/arch/arm/mach-iop32x/restart.c b/arch/arm/mach-iop32x/restart.c
deleted file mode 100644
index 3dfa54d3a7a8..000000000000
--- a/arch/arm/mach-iop32x/restart.c
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * restart.c
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- */
-#include <asm/system_misc.h>
-#include "hardware.h"
-#include "iop3xx.h"
-
-void iop3xx_restart(enum reboot_mode mode, const char *cmd)
-{
-	*IOP3XX_PCSR = 0x30;
-
-	/* Jump into ROM at address 0 */
-	soft_restart(0);
-}
diff --git a/arch/arm/mach-iop32x/setup.c b/arch/arm/mach-iop32x/setup.c
deleted file mode 100644
index a0a81c28a632..000000000000
--- a/arch/arm/mach-iop32x/setup.c
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/plat-iop/setup.c
- *
- * Author: Nicolas Pitre <nico@fluxnic.net>
- * Copyright (C) 2001 MontaVista Software, Inc.
- * Copyright (C) 2004 Intel Corporation.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <asm/mach/map.h>
-#include "iop3xx.h"
-
-/*
- * Standard IO mapping for all IOP3xx based systems.  Note that
- * the IOP3xx OCCDR must be mapped uncached and unbuffered.
- */
-static struct map_desc iop3xx_std_desc[] __initdata = {
-	{	/* mem mapped registers */
-		.virtual	= IOP3XX_PERIPHERAL_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE),
-		.length		= IOP3XX_PERIPHERAL_SIZE,
-		.type		= MT_UNCACHED,
-	},
-};
-
-void __init iop3xx_map_io(void)
-{
-	iotable_init(iop3xx_std_desc, ARRAY_SIZE(iop3xx_std_desc));
-}
diff --git a/arch/arm/mach-iop32x/time.c b/arch/arm/mach-iop32x/time.c
deleted file mode 100644
index ae533b66fefd..000000000000
--- a/arch/arm/mach-iop32x/time.c
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/plat-iop/time.c
- *
- * Timer code for IOP32x and IOP33x based systems
- *
- * Author: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright 2002-2003 MontaVista Software Inc.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-#include <linux/io.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/export.h>
-#include <linux/sched_clock.h>
-#include <asm/irq.h>
-#include <linux/uaccess.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include "hardware.h"
-#include "irqs.h"
-
-/*
- * Minimum clocksource/clockevent timer range in seconds
- */
-#define IOP_MIN_RANGE 4
-
-/*
- * IOP clocksource (free-running timer 1).
- */
-static u64 notrace iop_clocksource_read(struct clocksource *unused)
-{
-	return 0xffffffffu - read_tcr1();
-}
-
-static struct clocksource iop_clocksource = {
-	.name 		= "iop_timer1",
-	.rating		= 300,
-	.read		= iop_clocksource_read,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
- * IOP sched_clock() implementation via its clocksource.
- */
-static u64 notrace iop_read_sched_clock(void)
-{
-	return 0xffffffffu - read_tcr1();
-}
-
-/*
- * IOP clockevents (interrupting timer 0).
- */
-static int iop_set_next_event(unsigned long delta,
-			      struct clock_event_device *unused)
-{
-	u32 tmr = IOP_TMR_PRIVILEGED | IOP_TMR_RATIO_1_1;
-
-	BUG_ON(delta == 0);
-	write_tmr0(tmr & ~(IOP_TMR_EN | IOP_TMR_RELOAD));
-	write_tcr0(delta);
-	write_tmr0((tmr & ~IOP_TMR_RELOAD) | IOP_TMR_EN);
-
-	return 0;
-}
-
-static unsigned long ticks_per_jiffy;
-
-static int iop_set_periodic(struct clock_event_device *evt)
-{
-	u32 tmr = read_tmr0();
-
-	write_tmr0(tmr & ~IOP_TMR_EN);
-	write_tcr0(ticks_per_jiffy - 1);
-	write_trr0(ticks_per_jiffy - 1);
-	tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN);
-
-	write_tmr0(tmr);
-	return 0;
-}
-
-static int iop_set_oneshot(struct clock_event_device *evt)
-{
-	u32 tmr = read_tmr0();
-
-	/* ->set_next_event sets period and enables timer */
-	tmr &= ~(IOP_TMR_RELOAD | IOP_TMR_EN);
-	write_tmr0(tmr);
-	return 0;
-}
-
-static int iop_shutdown(struct clock_event_device *evt)
-{
-	u32 tmr = read_tmr0();
-
-	tmr &= ~IOP_TMR_EN;
-	write_tmr0(tmr);
-	return 0;
-}
-
-static int iop_resume(struct clock_event_device *evt)
-{
-	u32 tmr = read_tmr0();
-
-	tmr |= IOP_TMR_EN;
-	write_tmr0(tmr);
-	return 0;
-}
-
-static struct clock_event_device iop_clockevent = {
-	.name			= "iop_timer0",
-	.features		= CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_ONESHOT,
-	.rating			= 300,
-	.set_next_event		= iop_set_next_event,
-	.set_state_shutdown	= iop_shutdown,
-	.set_state_periodic	= iop_set_periodic,
-	.tick_resume		= iop_resume,
-	.set_state_oneshot	= iop_set_oneshot,
-};
-
-static irqreturn_t
-iop_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	write_tisr(1);
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-static unsigned long iop_tick_rate;
-unsigned long get_iop_tick_rate(void)
-{
-	return iop_tick_rate;
-}
-EXPORT_SYMBOL(get_iop_tick_rate);
-
-void __init iop_init_time(unsigned long tick_rate)
-{
-	u32 timer_ctl;
-	int irq = IRQ_IOP32X_TIMER0;
-
-	sched_clock_register(iop_read_sched_clock, 32, tick_rate);
-
-	ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
-	iop_tick_rate = tick_rate;
-
-	timer_ctl = IOP_TMR_EN | IOP_TMR_PRIVILEGED |
-			IOP_TMR_RELOAD | IOP_TMR_RATIO_1_1;
-
-	/*
-	 * Set up interrupting clockevent timer 0.
-	 */
-	write_tmr0(timer_ctl & ~IOP_TMR_EN);
-	write_tisr(1);
-	if (request_irq(irq, iop_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
-			"IOP Timer Tick", &iop_clockevent))
-		pr_err("Failed to request irq() %d (IOP Timer Tick)\n", irq);
-	iop_clockevent.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&iop_clockevent, tick_rate,
-					0xf, 0xfffffffe);
-
-	/*
-	 * Set up free-running clocksource timer 1.
-	 */
-	write_trr1(0xffffffff);
-	write_tcr1(0xffffffff);
-	write_tmr1(timer_ctl);
-	clocksource_register_hz(&iop_clocksource, tick_rate);
-}
diff --git a/arch/arm/mach-ixp4xx/ixp4xx-of.c b/arch/arm/mach-ixp4xx/ixp4xx-of.c
index f9904716ec7f..1b4d84a5b02f 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx-of.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx-of.c
@@ -2,51 +2,10 @@
 /*
  * IXP4xx Device Tree boot support
  */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-/*
- * These are the only fixed phys to virt mappings we ever need
- * we put it right after the UART mapping at 0xffc80000-0xffc81fff
- */
-#define IXP4XX_EXP_CFG_BASE_PHYS	0xC4000000
-#define IXP4XX_EXP_CFG_BASE_VIRT	0xFEC14000
-
-static struct map_desc ixp4xx_of_io_desc[] __initdata = {
-	/*
-	 * This is needed for runtime system configuration checks,
-	 * such as reading if hardware so-and-so is present. This
-	 * could eventually be converted into a syscon once all boards
-	 * are converted to device tree.
-	 */
-	{
-		.virtual = IXP4XX_EXP_CFG_BASE_VIRT,
-		.pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
-		.length = SZ_4K,
-		.type = MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_UART_8250
-	/* This is needed for LL-debug/earlyprintk/debug-macro.S */
-	{
-		.virtual = CONFIG_DEBUG_UART_VIRT,
-		.pfn = __phys_to_pfn(CONFIG_DEBUG_UART_PHYS),
-		.length = SZ_4K,
-		.type = MT_DEVICE,
-	},
-#endif
-};
-
-static void __init ixp4xx_of_map_io(void)
-{
-	iotable_init(ixp4xx_of_io_desc, ARRAY_SIZE(ixp4xx_of_io_desc));
-}
 
 /*
- * We handle 4 differen SoC families. These compatible strings are enough
+ * We handle 4 different SoC families. These compatible strings are enough
  * to provide the core so that different boards can add their more detailed
  * specifics.
  */
@@ -59,6 +18,5 @@ static const char *ixp4xx_of_board_compat[] = {
 };
 
 DT_MACHINE_START(IXP4XX_DT, "IXP4xx (Device Tree)")
-	.map_io		= ixp4xx_of_map_io,
 	.dt_compat	= ixp4xx_of_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile
index 739b38be5696..66598d29dd3c 100644
--- a/arch/arm/mach-keystone/Makefile
+++ b/arch/arm/mach-keystone/Makefile
@@ -1,7 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0
-obj-y					:= keystone.o smc.o
-
-obj-$(CONFIG_SMP)			+= platsmp.o
-
-# PM domain driver for Keystone SOCs
-obj-$(CONFIG_ARCH_KEYSTONE)		+= pm_domain.o
+obj-y					:= keystone.o
diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c
index 2c647bdf8d25..f63671a3024c 100644
--- a/arch/arm/mach-keystone/keystone.c
+++ b/arch/arm/mach-keystone/keystone.c
@@ -6,24 +6,63 @@
  *	Cyril Chemparathy <cyril@ti.com>
  *	Santosh Shilimkar <santosh.shillimkar@ti.com>
  */
+
 #include <linux/io.h>
-#include <linux/of.h>
 #include <linux/dma-map-ops.h>
 #include <linux/init.h>
-#include <linux/of_platform.h>
-#include <linux/of_address.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_clock.h>
 #include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
 
 #include <asm/setup.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <asm/smp_plat.h>
-#include <asm/memory.h>
+#include <asm/page.h>
+
+#define KEYSTONE_LOW_PHYS_START		0x80000000ULL
+#define KEYSTONE_LOW_PHYS_SIZE		0x80000000ULL /* 2G */
+#define KEYSTONE_LOW_PHYS_END		(KEYSTONE_LOW_PHYS_START + \
+					 KEYSTONE_LOW_PHYS_SIZE - 1)
+
+#define KEYSTONE_HIGH_PHYS_START	0x800000000ULL
+#define KEYSTONE_HIGH_PHYS_SIZE		0x400000000ULL	/* 16G */
+#define KEYSTONE_HIGH_PHYS_END		(KEYSTONE_HIGH_PHYS_START + \
+					 KEYSTONE_HIGH_PHYS_SIZE - 1)
+
+static struct dev_pm_domain keystone_pm_domain = {
+	.ops = {
+		USE_PM_CLK_RUNTIME_OPS
+		USE_PLATFORM_PM_SLEEP_OPS
+	},
+};
 
-#include "memory.h"
+static struct pm_clk_notifier_block platform_domain_notifier = {
+	.pm_domain = &keystone_pm_domain,
+	.con_ids = { NULL },
+};
+
+static const struct of_device_id of_keystone_table[] = {
+	{.compatible = "ti,k2hk"},
+	{.compatible = "ti,k2e"},
+	{.compatible = "ti,k2l"},
+	{ /* end of list */ },
+};
 
-#include "keystone.h"
+static int __init keystone_pm_runtime_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, of_keystone_table);
+	if (!np)
+		return 0;
+
+	pm_clk_add_notifier(&platform_bus_type, &platform_domain_notifier);
+
+	return 0;
+}
 
 #ifdef CONFIG_ARM_LPAE
 static int keystone_platform_notifier(struct notifier_block *nb,
@@ -103,7 +142,6 @@ DT_MACHINE_START(KEYSTONE, "Keystone")
 #if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
 	.dma_zone_size	= SZ_2G,
 #endif
-	.smp		= smp_ops(keystone_smp_ops),
 	.init_machine	= keystone_init,
 	.dt_compat	= keystone_match,
 	.pv_fixup	= keystone_pv_fixup,
diff --git a/arch/arm/mach-keystone/keystone.h b/arch/arm/mach-keystone/keystone.h
deleted file mode 100644
index 438e531cc007..000000000000
--- a/arch/arm/mach-keystone/keystone.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2013 Texas Instruments, Inc.
- *	Cyril Chemparathy <cyril@ti.com>
- *	Santosh Shilimkar <santosh.shillimkar@ti.com>
- */
-
-#ifndef __KEYSTONE_H__
-#define __KEYSTONE_H__
-
-#define KEYSTONE_MON_CPU_UP_IDX		0x00
-
-#ifndef __ASSEMBLER__
-
-extern const struct smp_operations keystone_smp_ops;
-extern void secondary_startup(void);
-extern u32 keystone_cpu_smc(u32 command, u32 cpu, u32 addr);
-extern int keystone_pm_runtime_init(void);
-
-#endif /* __ASSEMBLER__ */
-#endif /* __KEYSTONE_H__ */
diff --git a/arch/arm/mach-keystone/memory.h b/arch/arm/mach-keystone/memory.h
deleted file mode 100644
index 1b9ed1271e05..000000000000
--- a/arch/arm/mach-keystone/memory.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2014 Texas Instruments, Inc.
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- */
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-#define KEYSTONE_LOW_PHYS_START		0x80000000ULL
-#define KEYSTONE_LOW_PHYS_SIZE		0x80000000ULL /* 2G */
-#define KEYSTONE_LOW_PHYS_END		(KEYSTONE_LOW_PHYS_START + \
-					 KEYSTONE_LOW_PHYS_SIZE - 1)
-
-#define KEYSTONE_HIGH_PHYS_START	0x800000000ULL
-#define KEYSTONE_HIGH_PHYS_SIZE		0x400000000ULL	/* 16G */
-#define KEYSTONE_HIGH_PHYS_END		(KEYSTONE_HIGH_PHYS_START + \
-					 KEYSTONE_HIGH_PHYS_SIZE - 1)
-#endif /* __MEMORY_H */
diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c
deleted file mode 100644
index 673fcf3b34b1..000000000000
--- a/arch/arm/mach-keystone/platsmp.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Keystone SOC SMP platform code
- *
- * Copyright 2013 Texas Instruments, Inc.
- *	Cyril Chemparathy <cyril@ti.com>
- *	Santosh Shilimkar <santosh.shillimkar@ti.com>
- *
- * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-#include <linux/pgtable.h>
-
-#include <asm/smp_plat.h>
-#include <asm/prom.h>
-#include <asm/tlbflush.h>
-
-#include "keystone.h"
-
-static int keystone_smp_boot_secondary(unsigned int cpu,
-						struct task_struct *idle)
-{
-	unsigned long start = virt_to_idmap(&secondary_startup);
-	int error;
-
-	pr_debug("keystone-smp: booting cpu %d, vector %08lx\n",
-		 cpu, start);
-
-	error = keystone_cpu_smc(KEYSTONE_MON_CPU_UP_IDX, cpu, start);
-	if (error)
-		pr_err("CPU %d bringup failed with %d\n", cpu, error);
-
-	return error;
-}
-
-const struct smp_operations keystone_smp_ops __initconst = {
-	.smp_boot_secondary	= keystone_smp_boot_secondary,
-};
diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c
deleted file mode 100644
index 5eea01cbecf0..000000000000
--- a/arch/arm/mach-keystone/pm_domain.c
+++ /dev/null
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * PM domain driver for Keystone2 devices
- *
- * Copyright 2013 Texas Instruments, Inc.
- *	Santosh Shilimkar <santosh.shillimkar@ti.com>
- *
- * Based on Kevins work on DAVINCI SOCs
- *	Kevin Hilman <khilman@linaro.org>
- */
-
-#include <linux/init.h>
-#include <linux/pm_runtime.h>
-#include <linux/pm_clock.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-
-#include "keystone.h"
-
-static struct dev_pm_domain keystone_pm_domain = {
-	.ops = {
-		USE_PM_CLK_RUNTIME_OPS
-		USE_PLATFORM_PM_SLEEP_OPS
-	},
-};
-
-static struct pm_clk_notifier_block platform_domain_notifier = {
-	.pm_domain = &keystone_pm_domain,
-	.con_ids = { NULL },
-};
-
-static const struct of_device_id of_keystone_table[] = {
-	{.compatible = "ti,k2hk"},
-	{.compatible = "ti,k2e"},
-	{.compatible = "ti,k2l"},
-	{ /* end of list */ },
-};
-
-int __init keystone_pm_runtime_init(void)
-{
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, of_keystone_table);
-	if (!np)
-		return 0;
-
-	pm_clk_add_notifier(&platform_bus_type, &platform_domain_notifier);
-
-	return 0;
-}
diff --git a/arch/arm/mach-keystone/smc.S b/arch/arm/mach-keystone/smc.S
deleted file mode 100644
index 21ef75cf5370..000000000000
--- a/arch/arm/mach-keystone/smc.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Keystone Secure APIs
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- * 	Santosh Shilimkar <santosh.shilimkar@ti.com>
- */
-
-#include <linux/linkage.h>
-
-/**
- * u32 keystone_cpu_smc(u32 command, u32 cpu, u32 addr)
- *
- * Low level CPU monitor API
- * @command:	Monitor command.
- * @cpu:	CPU Number
- * @addr:	Kernel jump address for boot CPU
- *
- * Return: Non zero value on failure
- */
-	.arch_extension sec
-ENTRY(keystone_cpu_smc)
-	stmfd   sp!, {r4-r11, lr}
-	smc	#0
-	ldmfd   sp!, {r4-r11, pc}
-ENDPROC(keystone_cpu_smc)
diff --git a/arch/arm/mach-lpc18xx/Makefile.boot b/arch/arm/mach-lpc18xx/Makefile.boot
deleted file mode 100644
index cec195d4fcba..000000000000
--- a/arch/arm/mach-lpc18xx/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Empty file waiting for deletion once Makefile.boot isn't needed any more.
-# Patch waits for application at
-# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
index 35730d3696d0..138599545c24 100644
--- a/arch/arm/mach-lpc32xx/Kconfig
+++ b/arch/arm/mach-lpc32xx/Kconfig
@@ -8,5 +8,6 @@ config ARCH_LPC32XX
 	select CLKSRC_LPC32XX
 	select CPU_ARM926T
 	select GPIOLIB
+	select LPC32XX_DMAMUX if AMBA_PL08X
 	help
 	  Support for the NXP LPC32XX family of processors
diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot
deleted file mode 100644
index 37d09ddb27f8..000000000000
--- a/arch/arm/mach-lpc32xx/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0x80008000
-params_phys-y	:= 0x80000100
-initrd_phys-y	:= 0x82000000
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index 3e765c4bf986..3b1203db81b2 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -15,6 +15,7 @@
 #include <linux/serial_8250.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/soc/nxp/lpc32xx-misc.h>
 
 #include "lpc32xx.h"
 #include "common.h"
diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
index 35a3430c7942..638eabad2dd3 100644
--- a/arch/arm/mach-mediatek/Kconfig
+++ b/arch/arm/mach-mediatek/Kconfig
@@ -15,6 +15,10 @@ config MACH_MT2701
 	bool "MediaTek MT2701 SoCs support"
 	default ARCH_MEDIATEK
 
+config MACH_MT6572
+	bool "MediaTek MT6572 SoCs support"
+	default ARCH_MEDIATEK
+
 config MACH_MT6589
 	bool "MediaTek MT6589 SoCs support"
 	default ARCH_MEDIATEK
diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
index e6e9f93a1f01..5c28124bd007 100644
--- a/arch/arm/mach-mediatek/mediatek.c
+++ b/arch/arm/mach-mediatek/mediatek.c
@@ -38,6 +38,7 @@ static void __init mediatek_timer_init(void)
 
 static const char * const mediatek_board_dt_compat[] = {
 	"mediatek,mt2701",
+	"mediatek,mt6572",
 	"mediatek,mt6589",
 	"mediatek,mt6592",
 	"mediatek,mt7623",
diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c
index 16a4ee6c9590..bbd26d423bde 100644
--- a/arch/arm/mach-mediatek/platsmp.c
+++ b/arch/arm/mach-mediatek/platsmp.c
@@ -29,6 +29,12 @@ static const struct mtk_smp_boot_info mtk_mt8135_tz_boot = {
 	{ 0x3f8, 0x3f8, 0x3f8 },
 };
 
+static const struct mtk_smp_boot_info mtk_mt6572_boot = {
+	0x10001400, 0x08,
+	{ 0x534c4131 },
+	{ 0x0c },
+};
+
 static const struct mtk_smp_boot_info mtk_mt6589_boot = {
 	0x10002000, 0x34,
 	{ 0x534c4131, 0x4c415332, 0x41534c33 },
@@ -49,6 +55,7 @@ static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = {
 };
 
 static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
+	{ .compatible   = "mediatek,mt6572", .data = &mtk_mt6572_boot },
 	{ .compatible   = "mediatek,mt6589", .data = &mtk_mt6589_boot },
 	{ .compatible   = "mediatek,mt7623", .data = &mtk_mt7623_boot },
 	{ .compatible   = "mediatek,mt7629", .data = &mtk_mt7623_boot },
diff --git a/arch/arm/mach-meson/meson.c b/arch/arm/mach-meson/meson.c
index de56e707c7aa..d3ae89dd84bb 100644
--- a/arch/arm/mach-meson/meson.c
+++ b/arch/arm/mach-meson/meson.c
@@ -3,7 +3,6 @@
  * Copyright (C) 2014 Carlo Caione <carlo@caione.org>
  */
 
-#include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 
 static const char * const meson_common_board_compat[] = {
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index d71417d57961..8c1d4402fd69 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -13,99 +13,6 @@ if ARCH_MMP
 
 menu "Marvell PXA168/910/MMP2 Implementations"
 
-if ATAGS
-
-config MACH_ASPENITE
-	bool "Marvell's PXA168 Aspenite Development Board"
-	depends on ARCH_MULTI_V5
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Aspenite Development Board.
-
-config MACH_ZYLONITE2
-	bool "Marvell's PXA168 Zylonite2 Development Board"
-	depends on ARCH_MULTI_V5
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Zylonite2 Development Board.
-
-config MACH_AVENGERS_LITE
-	bool "Marvell's PXA168 Avengers Lite Development Board"
-	depends on ARCH_MULTI_V5
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Avengers Lite Development Board.
-
-config MACH_TTC_DKB
-	bool "Marvell's PXA910 TavorEVB/TTC_DKB Development Board"
-	depends on ARCH_MULTI_V5
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA910
-	help
-	  Say 'Y' here if you want to support the Marvell PXA910-based
-	  TTC_DKB Development Board.
-
-config MACH_BROWNSTONE
-	bool "Marvell's Brownstone Development Platform"
-	depends on ARCH_MULTI_V7
-	depends on UNUSED_BOARD_FILES
-	select CPU_MMP2
-	help
-	  Say 'Y' here if you want to support the Marvell MMP2-based
-	  Brown Development Platform.
-	  MMP2-based board can't be co-existed with PXA168-based &
-	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv7 architecture.
-
-config MACH_FLINT
-	bool "Marvell's Flint Development Platform"
-	depends on ARCH_MULTI_V7
-	depends on UNUSED_BOARD_FILES
-	select CPU_MMP2
-	help
-	  Say 'Y' here if you want to support the Marvell MMP2-based
-	  Flint Development Platform.
-	  MMP2-based board can't be co-existed with PXA168-based &
-	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv7 architecture.
-
-config MACH_MARVELL_JASPER
-	bool "Marvell's Jasper Development Platform"
-	depends on ARCH_MULTI_V7
-	depends on UNUSED_BOARD_FILES
-	select CPU_MMP2
-	help
-	  Say 'Y' here if you want to support the Marvell MMP2-base
-	  Jasper Development Platform.
-	  MMP2-based board can't be co-existed with PXA168-based &
-	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv7 architecture.
-
-config MACH_TETON_BGA
-	bool "Marvell's PXA168 Teton BGA Development Board"
-	depends on ARCH_MULTI_V5
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Teton BGA Development Board.
-
-config MACH_GPLUGD
-	bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
-	depends on ARCH_MULTI_V5
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  GuruPlug Display (gplugD) Board
-endif
-
 config MACH_MMP_DT
 	bool "Support MMP (ARMv5) platforms from device tree"
 	depends on ARCH_MULTI_V5
@@ -169,13 +76,4 @@ config CPU_MMP2
 	help
 	  Select code specific to MMP2. MMP2 is ARMv7 compatible.
 
-config USB_EHCI_MV_U2O
-        bool "EHCI support for PXA USB OTG controller"
-	depends on USB_EHCI_MV
-	help
-	  Enables support for OTG controller which can be switched to host mode.
-
-config MMP_SRAM
-	bool
-
 endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 539d750aaf10..5d4a1a4a48cf 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -2,32 +2,13 @@
 #
 # Makefile for Marvell's PXA168 processors line
 #
-obj-y				+= common.o devices.o time.o
+obj-y				+= common.o time.o
 
-# SoC support
-obj-$(CONFIG_CPU_PXA168)	+= pxa168.o
-obj-$(CONFIG_CPU_PXA910)	+= pxa910.o
-obj-$(CONFIG_CPU_MMP2)		+= mmp2.o
-obj-$(CONFIG_MMP_SRAM)		+= sram.o
-
-ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_CPU_PXA910)	+= pm-pxa910.o
-obj-$(CONFIG_CPU_MMP2)		+= pm-mmp2.o
-endif
 ifeq ($(CONFIG_SMP),y)
 obj-$(CONFIG_MACH_MMP3_DT)	+= platsmp.o
 endif
 
 # board support
-obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
-obj-$(CONFIG_MACH_ZYLONITE2)	+= aspenite.o
-obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
-obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
-obj-$(CONFIG_MACH_BROWNSTONE)	+= brownstone.o
-obj-$(CONFIG_MACH_FLINT)	+= flint.o
-obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
 obj-$(CONFIG_MACH_MMP_DT)	+= mmp-dt.o
 obj-$(CONFIG_MACH_MMP2_DT)	+= mmp2-dt.o
 obj-$(CONFIG_MACH_MMP3_DT)	+= mmp3.o
-obj-$(CONFIG_MACH_TETON_BGA)	+= teton_bga.o
-obj-$(CONFIG_MACH_GPLUGD)	+= gplugd.o
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
deleted file mode 100644
index 6314824b62fc..000000000000
--- a/arch/arm/mach-mmp/aspenite.c
+++ /dev/null
@@ -1,284 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/aspenite.c
- *
- *  Support for the Marvell PXA168-based Aspenite and Zylonite2
- *  Development Platform.
- */
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/interrupt.h>
-#include <linux/platform_data/mv_usb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <video/pxa168fb.h>
-#include <linux/input.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-
-#include "addr-map.h"
-#include "mfp-pxa168.h"
-#include "pxa168.h"
-#include "pxa910.h"
-#include "irqs.h"
-#include "common.h"
-
-static unsigned long common_pin_config[] __initdata = {
-	/* Data Flash Interface */
-	GPIO0_DFI_D15,
-	GPIO1_DFI_D14,
-	GPIO2_DFI_D13,
-	GPIO3_DFI_D12,
-	GPIO4_DFI_D11,
-	GPIO5_DFI_D10,
-	GPIO6_DFI_D9,
-	GPIO7_DFI_D8,
-	GPIO8_DFI_D7,
-	GPIO9_DFI_D6,
-	GPIO10_DFI_D5,
-	GPIO11_DFI_D4,
-	GPIO12_DFI_D3,
-	GPIO13_DFI_D2,
-	GPIO14_DFI_D1,
-	GPIO15_DFI_D0,
-
-	/* Static Memory Controller */
-	GPIO18_SMC_nCS0,
-	GPIO34_SMC_nCS1,
-	GPIO23_SMC_nLUA,
-	GPIO25_SMC_nLLA,
-	GPIO28_SMC_RDY,
-	GPIO29_SMC_SCLK,
-	GPIO35_SMC_BE1,
-	GPIO36_SMC_BE2,
-	GPIO27_GPIO,	/* Ethernet IRQ */
-
-	/* UART1 */
-	GPIO107_UART1_RXD,
-	GPIO108_UART1_TXD,
-
-	/* SSP1 */
-	GPIO113_I2S_MCLK,
-	GPIO114_I2S_FRM,
-	GPIO115_I2S_BCLK,
-	GPIO116_I2S_RXD,
-	GPIO117_I2S_TXD,
-
-	/* LCD */
-	GPIO56_LCD_FCLK_RD,
-	GPIO57_LCD_LCLK_A0,
-	GPIO58_LCD_PCLK_WR,
-	GPIO59_LCD_DENA_BIAS,
-	GPIO60_LCD_DD0,
-	GPIO61_LCD_DD1,
-	GPIO62_LCD_DD2,
-	GPIO63_LCD_DD3,
-	GPIO64_LCD_DD4,
-	GPIO65_LCD_DD5,
-	GPIO66_LCD_DD6,
-	GPIO67_LCD_DD7,
-	GPIO68_LCD_DD8,
-	GPIO69_LCD_DD9,
-	GPIO70_LCD_DD10,
-	GPIO71_LCD_DD11,
-	GPIO72_LCD_DD12,
-	GPIO73_LCD_DD13,
-	GPIO74_LCD_DD14,
-	GPIO75_LCD_DD15,
-	GPIO76_LCD_DD16,
-	GPIO77_LCD_DD17,
-	GPIO78_LCD_DD18,
-	GPIO79_LCD_DD19,
-	GPIO80_LCD_DD20,
-	GPIO81_LCD_DD21,
-	GPIO82_LCD_DD22,
-	GPIO83_LCD_DD23,
-
-	/* Keypad */
-	GPIO109_KP_MKIN1,
-	GPIO110_KP_MKIN0,
-	GPIO111_KP_MKOUT7,
-	GPIO112_KP_MKOUT6,
-	GPIO121_KP_MKIN4,
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= SMC_CS1_PHYS_BASE + 0x300,
-		.end	= SMC_CS1_PHYS_BASE + 0xfffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MMP_GPIO_TO_IRQ(27),
-		.end	= MMP_GPIO_TO_IRQ(27),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct mtd_partition aspenite_nand_partitions[] = {
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_1M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_8M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= (SZ_2M + SZ_1M),
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_32M + SZ_16M,
-		.mask_flags	= 0,
-	}
-};
-
-static struct pxa3xx_nand_platform_data aspenite_nand_info = {
-	.parts		= aspenite_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(aspenite_nand_partitions),
-};
-
-static struct i2c_board_info aspenite_i2c_info[] __initdata = {
-	{ I2C_BOARD_INFO("wm8753", 0x1b), },
-};
-
-static struct fb_videomode video_modes[] = {
-	[0] = {
-		.pixclock	= 30120,
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.hsync_len	= 1,
-		.left_margin	= 215,
-		.right_margin	= 40,
-		.vsync_len	= 1,
-		.upper_margin	= 34,
-		.lower_margin	= 10,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
-	},
-};
-
-struct pxa168fb_mach_info aspenite_lcd_info = {
-	.id			= "Graphic Frame",
-	.modes			= video_modes,
-	.num_modes		= ARRAY_SIZE(video_modes),
-	.pix_fmt		= PIX_FMT_RGB565,
-	.io_pin_allocation_mode = PIN_MODE_DUMB_24,
-	.dumb_mode		= DUMB_MODE_RGB888,
-	.active			= 1,
-	.panel_rbswap		= 0,
-	.invert_pixclock	= 0,
-};
-
-static const unsigned int aspenite_matrix_key_map[] = {
-	KEY(0, 6, KEY_UP),	/* SW 4 */
-	KEY(0, 7, KEY_DOWN),	/* SW 5 */
-	KEY(1, 6, KEY_LEFT),	/* SW 6 */
-	KEY(1, 7, KEY_RIGHT),	/* SW 7 */
-	KEY(4, 6, KEY_ENTER),	/* SW 8 */
-	KEY(4, 7, KEY_ESC),	/* SW 9 */
-};
-
-static struct matrix_keymap_data aspenite_matrix_keymap_data = {
-	.keymap			= aspenite_matrix_key_map,
-	.keymap_size		= ARRAY_SIZE(aspenite_matrix_key_map),
-};
-
-static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
-	.matrix_key_rows	= 5,
-	.matrix_key_cols	= 8,
-	.matrix_keymap_data	= &aspenite_matrix_keymap_data,
-	.debounce_interval	= 30,
-};
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV)
-static struct mv_usb_platform_data pxa168_sph_pdata = {
-	.mode           = MV_USB_MODE_HOST,
-	.phy_init	= pxa_usb_phy_init,
-	.phy_deinit	= pxa_usb_phy_deinit,
-	.set_vbus	= NULL,
-};
-#endif
-
-static void __init common_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(common_pin_config));
-
-	/* on-chip devices */
-	pxa168_add_uart(1);
-	pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info));
-	pxa168_add_ssp(1);
-	pxa168_add_nand(&aspenite_nand_info);
-	pxa168_add_fb(&aspenite_lcd_info);
-	pxa168_add_keypad(&aspenite_keypad_info);
-	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&pxa168_device_gpio);
-
-	/* off-chip devices */
-	platform_device_register(&smc91x_device);
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-#if IS_ENABLED(CONFIG_PHY_PXA_USB)
-	platform_device_register(&pxa168_device_usb_phy);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV)
-	pxa168_add_usb_host(&pxa168_sph_pdata);
-#endif
-#endif
-}
-
-MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = common_init,
-	.restart	= pxa168_restart,
-MACHINE_END
-
-MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = common_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
deleted file mode 100644
index 12e5a9441df9..000000000000
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/avengers_lite.c
- *
- *  Support for the Marvell PXA168-based Avengers lite Development Platform.
- *
- *  Copyright (C) 2009-2010 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio-pxa.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-pxa168.h"
-#include "pxa168.h"
-#include "irqs.h"
-
-
-#include "common.h"
-#include <linux/delay.h>
-
-/* Avengers lite MFP configurations */
-static unsigned long avengers_lite_pin_config_V16F[] __initdata = {
-	/* DEBUG_UART */
-	GPIO88_UART2_TXD,
-	GPIO89_UART2_RXD,
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static void __init avengers_lite_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(avengers_lite_pin_config_V16F));
-
-	/* on-chip devices */
-	pxa168_add_uart(2);
-	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&pxa168_device_gpio);
-}
-
-MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = avengers_lite_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
deleted file mode 100644
index ce93bc395546..000000000000
--- a/arch/arm/mach-mmp/brownstone.c
+++ /dev/null
@@ -1,237 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/brownstone.c
- *
- *  Support for the Marvell Brownstone Development Platform.
- *
- *  Copyright (C) 2009-2010 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio-pxa.h>
-#include <linux/gpio/machine.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max8649.h>
-#include <linux/regulator/fixed.h>
-#include <linux/mfd/max8925.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-mmp2.h"
-#include "mmp2.h"
-#include "irqs.h"
-
-#include "common.h"
-
-#define BROWNSTONE_NR_IRQS	(MMP_NR_IRQS + 40)
-
-#define GPIO_5V_ENABLE		(89)
-
-static unsigned long brownstone_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO29_UART1_RXD,
-	GPIO30_UART1_TXD,
-
-	/* UART3 */
-	GPIO51_UART3_RXD,
-	GPIO52_UART3_TXD,
-
-	/* DFI */
-	GPIO168_DFI_D0,
-	GPIO167_DFI_D1,
-	GPIO166_DFI_D2,
-	GPIO165_DFI_D3,
-	GPIO107_DFI_D4,
-	GPIO106_DFI_D5,
-	GPIO105_DFI_D6,
-	GPIO104_DFI_D7,
-	GPIO111_DFI_D8,
-	GPIO164_DFI_D9,
-	GPIO163_DFI_D10,
-	GPIO162_DFI_D11,
-	GPIO161_DFI_D12,
-	GPIO110_DFI_D13,
-	GPIO109_DFI_D14,
-	GPIO108_DFI_D15,
-	GPIO143_ND_nCS0,
-	GPIO144_ND_nCS1,
-	GPIO147_ND_nWE,
-	GPIO148_ND_nRE,
-	GPIO150_ND_ALE,
-	GPIO149_ND_CLE,
-	GPIO112_ND_RDY0,
-	GPIO160_ND_RDY1,
-
-	/* PMIC */
-	PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
-
-	/* MMC0 */
-	GPIO131_MMC1_DAT3 | MFP_PULL_HIGH,
-	GPIO132_MMC1_DAT2 | MFP_PULL_HIGH,
-	GPIO133_MMC1_DAT1 | MFP_PULL_HIGH,
-	GPIO134_MMC1_DAT0 | MFP_PULL_HIGH,
-	GPIO136_MMC1_CMD | MFP_PULL_HIGH,
-	GPIO139_MMC1_CLK,
-	GPIO140_MMC1_CD | MFP_PULL_LOW,
-	GPIO141_MMC1_WP | MFP_PULL_LOW,
-
-	/* MMC1 */
-	GPIO37_MMC2_DAT3 | MFP_PULL_HIGH,
-	GPIO38_MMC2_DAT2 | MFP_PULL_HIGH,
-	GPIO39_MMC2_DAT1 | MFP_PULL_HIGH,
-	GPIO40_MMC2_DAT0 | MFP_PULL_HIGH,
-	GPIO41_MMC2_CMD | MFP_PULL_HIGH,
-	GPIO42_MMC2_CLK,
-
-	/* MMC2 */
-	GPIO165_MMC3_DAT7 | MFP_PULL_HIGH,
-	GPIO162_MMC3_DAT6 | MFP_PULL_HIGH,
-	GPIO166_MMC3_DAT5 | MFP_PULL_HIGH,
-	GPIO163_MMC3_DAT4 | MFP_PULL_HIGH,
-	GPIO167_MMC3_DAT3 | MFP_PULL_HIGH,
-	GPIO164_MMC3_DAT2 | MFP_PULL_HIGH,
-	GPIO168_MMC3_DAT1 | MFP_PULL_HIGH,
-	GPIO111_MMC3_DAT0 | MFP_PULL_HIGH,
-	GPIO112_MMC3_CMD | MFP_PULL_HIGH,
-	GPIO151_MMC3_CLK,
-
-	/* 5V regulator */
-	GPIO89_GPIO,
-};
-
-static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct regulator_consumer_supply max8649_supply[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data max8649_init_data = {
-	.constraints	= {
-		.name		= "vcc_core range",
-		.min_uV		= 1150000,
-		.max_uV		= 1280000,
-		.always_on	= 1,
-		.boot_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8649_supply[0],
-};
-
-static struct max8649_platform_data brownstone_max8649_info = {
-	.mode		= 2,	/* VID1 = 1, VID0 = 0 */
-	.extclk		= 0,
-	.ramp_timing	= MAX8649_RAMP_32MV,
-	.regulator	= &max8649_init_data,
-};
-
-static struct regulator_consumer_supply brownstone_v_5vp_supplies[] = {
-	REGULATOR_SUPPLY("v_5vp", NULL),
-};
-
-static struct regulator_init_data brownstone_v_5vp_data = {
-	.constraints	= {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(brownstone_v_5vp_supplies),
-	.consumer_supplies	= brownstone_v_5vp_supplies,
-};
-
-static struct fixed_voltage_config brownstone_v_5vp = {
-	.supply_name		= "v_5vp",
-	.microvolts		= 5000000,
-	.enabled_at_boot	= 1,
-	.init_data		= &brownstone_v_5vp_data,
-};
-
-static struct platform_device brownstone_v_5vp_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &brownstone_v_5vp,
-	},
-};
-
-static struct gpiod_lookup_table brownstone_v_5vp_gpiod_table = {
-	.dev_id = "reg-fixed-voltage.1", /* .id set to 1 above */
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_5V_ENABLE,
-			    NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct max8925_platform_data brownstone_max8925_info = {
-	.irq_base		= MMP_NR_IRQS,
-};
-
-static struct i2c_board_info brownstone_twsi1_info[] = {
-	[0] = {
-		.type		= "max8649",
-		.addr		= 0x60,
-		.platform_data	= &brownstone_max8649_info,
-	},
-	[1] = {
-		.type		= "max8925",
-		.addr		= 0x3c,
-		.irq		= IRQ_MMP2_PMIC,
-		.platform_data	= &brownstone_max8925_info,
-	},
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
-	.clk_delay_cycles = 0x1f,
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc2 = {
-	.clk_delay_cycles = 0x1f,
-	.flags = PXA_FLAG_CARD_PERMANENT
-		| PXA_FLAG_SD_8_BIT_CAPABLE_SLOT,
-};
-
-static struct sram_platdata mmp2_asram_platdata = {
-	.pool_name	= "asram",
-	.granularity	= SRAM_GRANULARITY,
-};
-
-static struct sram_platdata mmp2_isram_platdata = {
-	.pool_name	= "isram",
-	.granularity	= SRAM_GRANULARITY,
-};
-
-static void __init brownstone_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(brownstone_pin_config));
-
-	/* on-chip devices */
-	mmp2_add_uart(1);
-	mmp2_add_uart(3);
-	platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&mmp2_device_gpio);
-	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
-	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
-	mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
-	mmp2_add_asram(&mmp2_asram_platdata);
-	mmp2_add_isram(&mmp2_isram_platdata);
-
-	/* enable 5v regulator */
-	gpiod_add_lookup_table(&brownstone_v_5vp_gpiod_table);
-	platform_device_register(&brownstone_v_5vp_device);
-}
-
-MACHINE_START(BROWNSTONE, "Brownstone Development Platform")
-	/* Maintainer: Haojian Zhuang <haojian.zhuang@marvell.com> */
-	.map_io		= mmp_map_io,
-	.nr_irqs	= BROWNSTONE_NR_IRQS,
-	.init_irq	= mmp2_init_irq,
-	.init_time	= mmp2_timer_init,
-	.init_machine	= brownstone_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
index e94349d4726c..b3c1a248db31 100644
--- a/arch/arm/mach-mmp/common.c
+++ b/arch/arm/mach-mmp/common.c
@@ -58,8 +58,3 @@ void __init mmp2_map_io(void)
 	mmp_map_io();
 	iotable_init(mmp2_io_desc, ARRAY_SIZE(mmp2_io_desc));
 }
-
-void mmp_restart(enum reboot_mode mode, const char *cmd)
-{
-	soft_restart(0);
-}
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index ed56b3f15b45..e18f05d5d68d 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -1,9 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #include <linux/reboot.h>
-#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
 extern void mmp_timer_init(int irq, unsigned long rate);
 
 extern void __init mmp_map_io(void);
 extern void __init mmp2_map_io(void);
-extern void mmp_restart(enum reboot_mode, const char *);
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
deleted file mode 100644
index 79f4a2aa5475..000000000000
--- a/arch/arm/mach-mmp/devices.c
+++ /dev/null
@@ -1,359 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-mmp/devices.c
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-
-#include <asm/irq.h>
-#include "irqs.h"
-#include "devices.h"
-#include <linux/soc/mmp/cputype.h>
-#include "regs-usb.h"
-
-int __init mmp_register_device(struct mmp_device_desc *desc,
-				void *data, size_t size)
-{
-	struct platform_device *pdev;
-	struct resource res[2 + MAX_RESOURCE_DMA];
-	int i, ret = 0, nres = 0;
-
-	pdev = platform_device_alloc(desc->drv_name, desc->id);
-	if (pdev == NULL)
-		return -ENOMEM;
-
-	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-
-	memset(res, 0, sizeof(res));
-
-	if (desc->start != -1ul && desc->size > 0) {
-		res[nres].start	= desc->start;
-		res[nres].end	= desc->start + desc->size - 1;
-		res[nres].flags	= IORESOURCE_MEM;
-		nres++;
-	}
-
-	if (desc->irq != NO_IRQ) {
-		res[nres].start	= desc->irq;
-		res[nres].end	= desc->irq;
-		res[nres].flags	= IORESOURCE_IRQ;
-		nres++;
-	}
-
-	for (i = 0; i < MAX_RESOURCE_DMA; i++, nres++) {
-		if (desc->dma[i] == 0)
-			break;
-
-		res[nres].start	= desc->dma[i];
-		res[nres].end	= desc->dma[i];
-		res[nres].flags	= IORESOURCE_DMA;
-	}
-
-	ret = platform_device_add_resources(pdev, res, nres);
-	if (ret) {
-		platform_device_put(pdev);
-		return ret;
-	}
-
-	if (data && size) {
-		ret = platform_device_add_data(pdev, data, size);
-		if (ret) {
-			platform_device_put(pdev);
-			return ret;
-		}
-	}
-
-	return platform_device_add(pdev);
-}
-
-#if IS_ENABLED(CONFIG_USB) || IS_ENABLED(CONFIG_USB_GADGET)
-#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV)
-#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168)
-
-/*****************************************************************************
- * The registers read/write routines
- *****************************************************************************/
-
-static unsigned int u2o_get(void __iomem *base, unsigned int offset)
-{
-	return readl_relaxed(base + offset);
-}
-
-static void u2o_set(void __iomem *base, unsigned int offset,
-		unsigned int value)
-{
-	u32 reg;
-
-	reg = readl_relaxed(base + offset);
-	reg |= value;
-	writel_relaxed(reg, base + offset);
-	readl_relaxed(base + offset);
-}
-
-static void u2o_clear(void __iomem *base, unsigned int offset,
-		unsigned int value)
-{
-	u32 reg;
-
-	reg = readl_relaxed(base + offset);
-	reg &= ~value;
-	writel_relaxed(reg, base + offset);
-	readl_relaxed(base + offset);
-}
-
-static void u2o_write(void __iomem *base, unsigned int offset,
-		unsigned int value)
-{
-	writel_relaxed(value, base + offset);
-	readl_relaxed(base + offset);
-}
-
-
-static DEFINE_MUTEX(phy_lock);
-static int phy_init_cnt;
-
-static int usb_phy_init_internal(void __iomem *base)
-{
-	int loops;
-
-	pr_info("Init usb phy!!!\n");
-
-	/* Initialize the USB PHY power */
-	if (cpu_is_pxa910()) {
-		u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
-			| (1<<UTMI_CTRL_PU_REF_SHIFT));
-	}
-
-	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
-	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
-
-	/* UTMI_PLL settings */
-	u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
-		| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
-		| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
-		| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
-
-	u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
-		| 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
-		| 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
-		| 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
-
-	/* UTMI_TX */
-	u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
-		| UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
-		| UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
-		| UTMI_TX_AMP_MASK);
-	u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
-		| 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
-		| 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
-
-	/* UTMI_RX */
-	u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
-		| UTMI_REG_SQ_LENGTH_MASK);
-	u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
-		| 2<<UTMI_REG_SQ_LENGTH_SHIFT);
-
-	/* UTMI_IVREF */
-	if (cpu_is_pxa168())
-		/* fixing Microsoft Altair board interface with NEC hub issue -
-		 * Set UTMI_IVREF from 0x4a3 to 0x4bf */
-		u2o_write(base, UTMI_IVREF, 0x4bf);
-
-	/* toggle VCOCAL_START bit of UTMI_PLL */
-	udelay(200);
-	u2o_set(base, UTMI_PLL, VCOCAL_START);
-	udelay(40);
-	u2o_clear(base, UTMI_PLL, VCOCAL_START);
-
-	/* toggle REG_RCAL_START bit of UTMI_TX */
-	udelay(400);
-	u2o_set(base, UTMI_TX, REG_RCAL_START);
-	udelay(40);
-	u2o_clear(base, UTMI_TX, REG_RCAL_START);
-	udelay(400);
-
-	/* Make sure PHY PLL is ready */
-	loops = 0;
-	while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
-		mdelay(1);
-		loops++;
-		if (loops > 100) {
-			printk(KERN_WARNING "calibrate timeout, UTMI_PLL %x\n",
-				u2o_get(base, UTMI_PLL));
-			break;
-		}
-	}
-
-	if (cpu_is_pxa168()) {
-		u2o_set(base, UTMI_RESERVE, 1 << 5);
-		/* Turn on UTMI PHY OTG extension */
-		u2o_write(base, UTMI_OTG_ADDON, 1);
-	}
-
-	return 0;
-}
-
-static int usb_phy_deinit_internal(void __iomem *base)
-{
-	pr_info("Deinit usb phy!!!\n");
-
-	if (cpu_is_pxa168())
-		u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
-
-	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
-	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
-	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
-	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
-	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
-
-	return 0;
-}
-
-int pxa_usb_phy_init(void __iomem *phy_reg)
-{
-	mutex_lock(&phy_lock);
-	if (phy_init_cnt++ == 0)
-		usb_phy_init_internal(phy_reg);
-	mutex_unlock(&phy_lock);
-	return 0;
-}
-
-void pxa_usb_phy_deinit(void __iomem *phy_reg)
-{
-	WARN_ON(phy_init_cnt == 0);
-
-	mutex_lock(&phy_lock);
-	if (--phy_init_cnt == 0)
-		usb_phy_deinit_internal(phy_reg);
-	mutex_unlock(&phy_lock);
-}
-#endif
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-static u64 __maybe_unused usb_dma_mask = ~(u32)0;
-
-#if IS_ENABLED(CONFIG_PHY_PXA_USB)
-struct resource pxa168_usb_phy_resources[] = {
-	[0] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device pxa168_device_usb_phy = {
-	.name		= "pxa-usb-phy",
-	.id		= -1,
-	.resource	= pxa168_usb_phy_resources,
-	.num_resources	= ARRAY_SIZE(pxa168_usb_phy_resources),
-	.dev		=  {
-		.dma_mask	= &usb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	}
-};
-#endif /* CONFIG_PHY_PXA_USB */
-
-#if IS_ENABLED(CONFIG_USB_MV_UDC)
-struct resource pxa168_u2o_resources[] = {
-	/* regbase */
-	[0] = {
-		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
-		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
-	},
-	/* phybase */
-	[1] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
-		.start	= IRQ_PXA168_USB1,
-		.end	= IRQ_PXA168_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_u2o = {
-	.name		= "mv-udc",
-	.id		= -1,
-	.resource	= pxa168_u2o_resources,
-	.num_resources	= ARRAY_SIZE(pxa168_u2o_resources),
-	.dev		=  {
-		.dma_mask	= &usb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	}
-};
-#endif /* CONFIG_USB_MV_UDC */
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
-struct resource pxa168_u2oehci_resources[] = {
-	[0] = {
-		.start	= PXA168_U2O_REGBASE,
-		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PXA168_USB1,
-		.end	= IRQ_PXA168_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_u2oehci = {
-	.name		= "pxa-u2oehci",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &usb_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-
-	.num_resources	= ARRAY_SIZE(pxa168_u2oehci_resources),
-	.resource	= pxa168_u2oehci_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MV_OTG)
-struct resource pxa168_u2ootg_resources[] = {
-	/* regbase */
-	[0] = {
-		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
-		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
-	},
-	/* phybase */
-	[1] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
-		.start	= IRQ_PXA168_USB1,
-		.end	= IRQ_PXA168_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_u2ootg = {
-	.name		= "mv-otg",
-	.id		= -1,
-	.dev  = {
-		.dma_mask          = &usb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-
-	.num_resources	= ARRAY_SIZE(pxa168_u2ootg_resources),
-	.resource      = pxa168_u2ootg_resources,
-};
-#endif /* CONFIG_USB_MV_OTG */
-
-#endif
diff --git a/arch/arm/mach-mmp/devices.h b/arch/arm/mach-mmp/devices.h
deleted file mode 100644
index d4920ebfebc5..000000000000
--- a/arch/arm/mach-mmp/devices.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_DEVICE_H
-#define __MACH_DEVICE_H
-
-#include <linux/types.h>
-
-#define MAX_RESOURCE_DMA	2
-
-/* structure for describing the on-chip devices */
-struct mmp_device_desc {
-	const char	*dev_name;
-	const char	*drv_name;
-	int		id;
-	int		irq;
-	unsigned long	start;
-	unsigned long	size;
-	int		dma[MAX_RESOURCE_DMA];
-};
-
-#define PXA168_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
-struct mmp_device_desc pxa168_device_##_name __initdata = {		\
-	.dev_name	= "pxa168-" #_name,				\
-	.drv_name	= _drv,						\
-	.id		= _id,						\
-	.irq		= IRQ_PXA168_##_irq,				\
-	.start		= _start,					\
-	.size		= _size,					\
-	.dma		= { _dma },					\
-};
-
-#define PXA910_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
-struct mmp_device_desc pxa910_device_##_name __initdata = {		\
-	.dev_name	= "pxa910-" #_name,				\
-	.drv_name	= _drv,						\
-	.id		= _id,						\
-	.irq		= IRQ_PXA910_##_irq,				\
-	.start		= _start,					\
-	.size		= _size,					\
-	.dma		= { _dma },					\
-};
-
-#define MMP2_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
-struct mmp_device_desc mmp2_device_##_name __initdata = {		\
-	.dev_name	= "mmp2-" #_name,				\
-	.drv_name	= _drv,						\
-	.id		= _id,						\
-	.irq		= IRQ_MMP2_##_irq,				\
-	.start		= _start,					\
-	.size		= _size,					\
-	.dma		= { _dma },					\
-}
-
-extern int mmp_register_device(struct mmp_device_desc *, void *, size_t);
-extern int pxa_usb_phy_init(void __iomem *phy_reg);
-extern void pxa_usb_phy_deinit(void __iomem *phy_reg);
-
-#endif /* __MACH_DEVICE_H */
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
deleted file mode 100644
index 9a7054368e55..000000000000
--- a/arch/arm/mach-mmp/flint.c
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/flint.c
- *
- *  Support for the Marvell Flint Development Platform.
- *
- *  Copyright (C) 2009 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-mmp2.h"
-#include "mmp2.h"
-#include "irqs.h"
-
-#include "common.h"
-
-#define FLINT_NR_IRQS	(MMP_NR_IRQS + 48)
-
-static unsigned long flint_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO45_UART1_RXD,
-	GPIO46_UART1_TXD,
-
-	/* UART2 */
-	GPIO47_UART2_RXD,
-	GPIO48_UART2_TXD,
-
-	/* SMC */
-	GPIO151_SMC_SCLK,
-	GPIO145_SMC_nCS0,
-	GPIO146_SMC_nCS1,
-	GPIO152_SMC_BE0,
-	GPIO153_SMC_BE1,
-	GPIO154_SMC_IRQ,
-	GPIO113_SMC_RDY,
-
-	/*Ethernet*/
-	GPIO155_GPIO,
-
-	/* DFI */
-	GPIO168_DFI_D0,
-	GPIO167_DFI_D1,
-	GPIO166_DFI_D2,
-	GPIO165_DFI_D3,
-	GPIO107_DFI_D4,
-	GPIO106_DFI_D5,
-	GPIO105_DFI_D6,
-	GPIO104_DFI_D7,
-	GPIO111_DFI_D8,
-	GPIO164_DFI_D9,
-	GPIO163_DFI_D10,
-	GPIO162_DFI_D11,
-	GPIO161_DFI_D12,
-	GPIO110_DFI_D13,
-	GPIO109_DFI_D14,
-	GPIO108_DFI_D15,
-	GPIO143_ND_nCS0,
-	GPIO144_ND_nCS1,
-	GPIO147_ND_nWE,
-	GPIO148_ND_nRE,
-	GPIO150_ND_ALE,
-	GPIO149_ND_CLE,
-	GPIO112_ND_RDY0,
-	GPIO160_ND_RDY1,
-};
-
-static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct smc91x_platdata flint_smc91x_info = {
-	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start  = SMC_CS1_PHYS_BASE + 0x300,
-		.end    = SMC_CS1_PHYS_BASE + 0xfffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = MMP_GPIO_TO_IRQ(155),
-		.end    = MMP_GPIO_TO_IRQ(155),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name           = "smc91x",
-	.id             = 0,
-	.dev            = {
-		.platform_data = &flint_smc91x_info,
-	},
-	.num_resources  = ARRAY_SIZE(smc91x_resources),
-	.resource       = smc91x_resources,
-};
-
-static void __init flint_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(flint_pin_config));
-
-	/* on-chip devices */
-	mmp2_add_uart(1);
-	mmp2_add_uart(2);
-	platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&mmp2_device_gpio);
-
-	/* off-chip devices */
-	platform_device_register(&smc91x_device);
-}
-
-MACHINE_START(FLINT, "Flint Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= FLINT_NR_IRQS,
-	.init_irq       = mmp2_init_irq,
-	.init_time	= mmp2_timer_init,
-	.init_machine   = flint_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
deleted file mode 100644
index 5888b71944b8..000000000000
--- a/arch/arm/mach-mmp/gplugd.c
+++ /dev/null
@@ -1,206 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/gplugd.c
- *
- *  Support for the Marvell PXA168-based GuruPlug Display (gplugD) Platform.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "irqs.h"
-#include "pxa168.h"
-#include "mfp-pxa168.h"
-
-#include "common.h"
-
-static unsigned long gplugd_pin_config[] __initdata = {
-	/* UART3 */
-	GPIO8_UART3_TXD,
-	GPIO9_UART3_RXD,
-	GPIO1O_UART3_CTS,
-	GPIO11_UART3_RTS,
-
-	/* USB OTG PEN */
-	GPIO18_GPIO,
-
-	/* MMC2 */
-	GPIO28_MMC2_CMD,
-	GPIO29_MMC2_CLK,
-	GPIO30_MMC2_DAT0,
-	GPIO31_MMC2_DAT1,
-	GPIO32_MMC2_DAT2,
-	GPIO33_MMC2_DAT3,
-
-	/* LCD & HDMI clock selection GPIO: 0: 74.176MHz, 1: 74.25 MHz */
-	GPIO35_GPIO,
-	GPIO36_GPIO, /* CEC Interrupt */
-
-	/* MMC1 */
-	GPIO43_MMC1_CLK,
-	GPIO49_MMC1_CMD,
-	GPIO41_MMC1_DAT0,
-	GPIO40_MMC1_DAT1,
-	GPIO52_MMC1_DAT2,
-	GPIO51_MMC1_DAT3,
-	GPIO53_MMC1_CD,
-
-	/* LCD */
-	GPIO56_LCD_FCLK_RD,
-	GPIO57_LCD_LCLK_A0,
-	GPIO58_LCD_PCLK_WR,
-	GPIO59_LCD_DENA_BIAS,
-	GPIO60_LCD_DD0,
-	GPIO61_LCD_DD1,
-	GPIO62_LCD_DD2,
-	GPIO63_LCD_DD3,
-	GPIO64_LCD_DD4,
-	GPIO65_LCD_DD5,
-	GPIO66_LCD_DD6,
-	GPIO67_LCD_DD7,
-	GPIO68_LCD_DD8,
-	GPIO69_LCD_DD9,
-	GPIO70_LCD_DD10,
-	GPIO71_LCD_DD11,
-	GPIO72_LCD_DD12,
-	GPIO73_LCD_DD13,
-	GPIO74_LCD_DD14,
-	GPIO75_LCD_DD15,
-	GPIO76_LCD_DD16,
-	GPIO77_LCD_DD17,
-	GPIO78_LCD_DD18,
-	GPIO79_LCD_DD19,
-	GPIO80_LCD_DD20,
-	GPIO81_LCD_DD21,
-	GPIO82_LCD_DD22,
-	GPIO83_LCD_DD23,
-
-	/* GPIO */
-	GPIO84_GPIO,
-	GPIO85_GPIO,
-
-	/* Fast-Ethernet*/
-	GPIO86_TX_CLK,
-	GPIO87_TX_EN,
-	GPIO88_TX_DQ3,
-	GPIO89_TX_DQ2,
-	GPIO90_TX_DQ1,
-	GPIO91_TX_DQ0,
-	GPIO92_MII_CRS,
-	GPIO93_MII_COL,
-	GPIO94_RX_CLK,
-	GPIO95_RX_ER,
-	GPIO96_RX_DQ3,
-	GPIO97_RX_DQ2,
-	GPIO98_RX_DQ1,
-	GPIO99_RX_DQ0,
-	GPIO100_MII_MDC,
-	GPIO101_MII_MDIO,
-	GPIO103_RX_DV,
-	GPIO104_GPIO,     /* Reset PHY */
-
-	/* RTC interrupt */
-	GPIO102_GPIO,
-
-	/* I2C */
-	GPIO105_CI2C_SDA,
-	GPIO106_CI2C_SCL,
-
-	/* SPI NOR Flash on SSP2 */
-	GPIO107_SSP2_RXD,
-	GPIO108_SSP2_TXD,
-	GPIO110_GPIO,     /* SPI_CSn */
-	GPIO111_SSP2_CLK,
-
-	/* Select JTAG */
-	GPIO109_GPIO,
-
-	/* I2S */
-	GPIO114_I2S_FRM,
-	GPIO115_I2S_BCLK,
-	GPIO116_I2S_TXD
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct i2c_board_info gplugd_i2c_board_info[] = {
-	{
-		.type = "isl1208",
-		.addr = 0x6F,
-	}
-};
-
-/* Bring PHY out of reset by setting GPIO 104 */
-static int gplugd_eth_init(void)
-{
-	if (unlikely(gpio_request(104, "ETH_RESET_N"))) {
-		printk(KERN_ERR "Can't get hold of GPIO 104 to bring Ethernet "
-				"PHY out of reset\n");
-		return -EIO;
-	}
-
-	gpio_direction_output(104, 1);
-	gpio_free(104);
-	return 0;
-}
-
-struct pxa168_eth_platform_data gplugd_eth_platform_data = {
-	.port_number = 0,
-	.phy_addr    = 0,
-	.speed       = 0, /* Autonagotiation */
-	.intf        = PHY_INTERFACE_MODE_RMII,
-	.init        = gplugd_eth_init,
-};
-
-static void __init select_disp_freq(void)
-{
-	/* set GPIO 35 & clear GPIO 85 to set LCD External Clock to 74.25 MHz */
-	if (unlikely(gpio_request(35, "DISP_FREQ_SEL"))) {
-		printk(KERN_ERR "Can't get hold of GPIO 35 to select display "
-				"frequency\n");
-	} else {
-		gpio_direction_output(35, 1);
-		gpio_free(35);
-	}
-
-	if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) {
-		printk(KERN_ERR "Can't get hold of GPIO 85 to select display "
-				"frequency\n");
-	} else {
-		gpio_direction_output(85, 0);
-		gpio_free(85);
-	}
-}
-
-static void __init gplugd_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(gplugd_pin_config));
-
-	select_disp_freq();
-
-	/* on-chip devices */
-	pxa168_add_uart(3);
-	pxa168_add_ssp(1);
-	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
-	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&pxa168_device_gpio);
-
-	pxa168_add_eth(&gplugd_eth_platform_data);
-}
-
-MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = gplugd_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/irqs.h b/arch/arm/mach-mmp/irqs.h
deleted file mode 100644
index 5acc4d532a43..000000000000
--- a/arch/arm/mach-mmp/irqs.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_IRQS_H
-#define __ASM_MACH_IRQS_H
-
-/*
- * Interrupt numbers for PXA168
- */
-#define IRQ_PXA168_NONE			(-1)
-#define IRQ_PXA168_SSP4			0
-#define IRQ_PXA168_SSP3			1
-#define IRQ_PXA168_SSP2			2
-#define IRQ_PXA168_SSP1			3
-#define IRQ_PXA168_PMIC_INT		4
-#define IRQ_PXA168_RTC_INT		5
-#define IRQ_PXA168_RTC_ALARM		6
-#define IRQ_PXA168_TWSI0		7
-#define IRQ_PXA168_GPU			8
-#define IRQ_PXA168_KEYPAD		9
-#define IRQ_PXA168_ONEWIRE		12
-#define IRQ_PXA168_TIMER1		13
-#define IRQ_PXA168_TIMER2		14
-#define IRQ_PXA168_TIMER3		15
-#define IRQ_PXA168_CMU			16
-#define IRQ_PXA168_SSP5			17
-#define IRQ_PXA168_MSP_WAKEUP		19
-#define IRQ_PXA168_CF_WAKEUP		20
-#define IRQ_PXA168_XD_WAKEUP		21
-#define IRQ_PXA168_MFU			22
-#define IRQ_PXA168_MSP			23
-#define IRQ_PXA168_CF			24
-#define IRQ_PXA168_XD			25
-#define IRQ_PXA168_DDR_INT		26
-#define IRQ_PXA168_UART1		27
-#define IRQ_PXA168_UART2		28
-#define IRQ_PXA168_UART3		29
-#define IRQ_PXA168_WDT			35
-#define IRQ_PXA168_MAIN_PMU		36
-#define IRQ_PXA168_FRQ_CHANGE		38
-#define IRQ_PXA168_SDH1			39
-#define IRQ_PXA168_SDH2			40
-#define IRQ_PXA168_LCD			41
-#define IRQ_PXA168_CI			42
-#define IRQ_PXA168_USB1			44
-#define IRQ_PXA168_NAND			45
-#define IRQ_PXA168_HIFI_DMA		46
-#define IRQ_PXA168_DMA_INT0		47
-#define IRQ_PXA168_DMA_INT1		48
-#define IRQ_PXA168_GPIOX		49
-#define IRQ_PXA168_USB2			51
-#define IRQ_PXA168_AC97			57
-#define IRQ_PXA168_TWSI1		58
-#define IRQ_PXA168_AP_PMU		60
-#define IRQ_PXA168_SM_INT		63
-
-/*
- * Interrupt numbers for PXA910
- */
-#define IRQ_PXA910_NONE			(-1)
-#define IRQ_PXA910_AIRQ			0
-#define IRQ_PXA910_SSP3			1
-#define IRQ_PXA910_SSP2			2
-#define IRQ_PXA910_SSP1			3
-#define IRQ_PXA910_PMIC_INT		4
-#define IRQ_PXA910_RTC_INT		5
-#define IRQ_PXA910_RTC_ALARM		6
-#define IRQ_PXA910_TWSI0		7
-#define IRQ_PXA910_GPU			8
-#define IRQ_PXA910_KEYPAD		9
-#define IRQ_PXA910_ROTARY		10
-#define IRQ_PXA910_TRACKBALL		11
-#define IRQ_PXA910_ONEWIRE		12
-#define IRQ_PXA910_AP1_TIMER1		13
-#define IRQ_PXA910_AP1_TIMER2		14
-#define IRQ_PXA910_AP1_TIMER3		15
-#define IRQ_PXA910_IPC_AP0		16
-#define IRQ_PXA910_IPC_AP1		17
-#define IRQ_PXA910_IPC_AP2		18
-#define IRQ_PXA910_IPC_AP3		19
-#define IRQ_PXA910_IPC_AP4		20
-#define IRQ_PXA910_IPC_CP0		21
-#define IRQ_PXA910_IPC_CP1		22
-#define IRQ_PXA910_IPC_CP2		23
-#define IRQ_PXA910_IPC_CP3		24
-#define IRQ_PXA910_IPC_CP4		25
-#define IRQ_PXA910_L2_DDR		26
-#define IRQ_PXA910_UART2		27
-#define IRQ_PXA910_UART3		28
-#define IRQ_PXA910_AP2_TIMER1		29
-#define IRQ_PXA910_AP2_TIMER2		30
-#define IRQ_PXA910_CP2_TIMER1		31
-#define IRQ_PXA910_CP2_TIMER2		32
-#define IRQ_PXA910_CP2_TIMER3		33
-#define IRQ_PXA910_GSSP			34
-#define IRQ_PXA910_CP2_WDT		35
-#define IRQ_PXA910_MAIN_PMU		36
-#define IRQ_PXA910_CP_FREQ_CHG		37
-#define IRQ_PXA910_AP_FREQ_CHG		38
-#define IRQ_PXA910_MMC			39
-#define IRQ_PXA910_AEU			40
-#define IRQ_PXA910_LCD			41
-#define IRQ_PXA910_CCIC			42
-#define IRQ_PXA910_IRE			43
-#define IRQ_PXA910_USB1			44
-#define IRQ_PXA910_NAND			45
-#define IRQ_PXA910_HIFI_DMA		46
-#define IRQ_PXA910_DMA_INT0		47
-#define IRQ_PXA910_DMA_INT1		48
-#define IRQ_PXA910_AP_GPIO		49
-#define IRQ_PXA910_AP2_TIMER3		50
-#define IRQ_PXA910_USB2			51
-#define IRQ_PXA910_TWSI1		54
-#define IRQ_PXA910_CP_GPIO		55
-#define IRQ_PXA910_UART1		59	/* Slow UART */
-#define IRQ_PXA910_AP_PMU		60
-#define IRQ_PXA910_SM_INT		63	/* from PinMux */
-
-/*
- * Interrupt numbers for MMP2
- */
-#define IRQ_MMP2_NONE			(-1)
-#define IRQ_MMP2_SSP1			0
-#define IRQ_MMP2_SSP2			1
-#define IRQ_MMP2_SSPA1			2
-#define IRQ_MMP2_SSPA2			3
-#define IRQ_MMP2_PMIC_MUX		4	/* PMIC & Charger */
-#define IRQ_MMP2_RTC_MUX		5
-#define IRQ_MMP2_TWSI1			7
-#define IRQ_MMP2_GPU			8
-#define IRQ_MMP2_KEYPAD_MUX		9
-#define IRQ_MMP2_ROTARY			10
-#define IRQ_MMP2_TRACKBALL		11
-#define IRQ_MMP2_ONEWIRE		12
-#define IRQ_MMP2_TIMER1			13
-#define IRQ_MMP2_TIMER2			14
-#define IRQ_MMP2_TIMER3			15
-#define IRQ_MMP2_RIPC			16
-#define IRQ_MMP2_TWSI_MUX		17	/* TWSI2 ~ TWSI6 */
-#define IRQ_MMP2_HDMI			19
-#define IRQ_MMP2_SSP3			20
-#define IRQ_MMP2_SSP4			21
-#define IRQ_MMP2_USB_HS1		22
-#define IRQ_MMP2_USB_HS2		23
-#define IRQ_MMP2_UART3			24
-#define IRQ_MMP2_UART1			27
-#define IRQ_MMP2_UART2			28
-#define IRQ_MMP2_MIPI_DSI		29
-#define IRQ_MMP2_CI2			30
-#define IRQ_MMP2_PMU_TIMER1		31
-#define IRQ_MMP2_PMU_TIMER2		32
-#define IRQ_MMP2_PMU_TIMER3		33
-#define IRQ_MMP2_USB_FS			34
-#define IRQ_MMP2_MISC_MUX		35
-#define IRQ_MMP2_WDT1			36
-#define IRQ_MMP2_NAND_DMA		37
-#define IRQ_MMP2_USIM			38
-#define IRQ_MMP2_MMC			39
-#define IRQ_MMP2_WTM			40
-#define IRQ_MMP2_LCD			41
-#define IRQ_MMP2_CI			42
-#define IRQ_MMP2_IRE			43
-#define IRQ_MMP2_USB_OTG		44
-#define IRQ_MMP2_NAND			45
-#define IRQ_MMP2_UART4			46
-#define IRQ_MMP2_DMA_FIQ		47
-#define IRQ_MMP2_DMA_RIQ		48
-#define IRQ_MMP2_GPIO			49
-#define IRQ_MMP2_MIPI_HSI1_MUX		51
-#define IRQ_MMP2_MMC2			52
-#define IRQ_MMP2_MMC3			53
-#define IRQ_MMP2_MMC4			54
-#define IRQ_MMP2_MIPI_HSI0_MUX		55
-#define IRQ_MMP2_MSP			58
-#define IRQ_MMP2_MIPI_SLIM_DMA		59
-#define IRQ_MMP2_PJ4_FREQ_CHG		60
-#define IRQ_MMP2_MIPI_SLIM		62
-#define IRQ_MMP2_SM			63
-
-#define IRQ_MMP2_MUX_BASE		64
-
-/* secondary interrupt of INT #4 */
-#define IRQ_MMP2_PMIC_BASE		(IRQ_MMP2_MUX_BASE)
-#define IRQ_MMP2_CHARGER		(IRQ_MMP2_PMIC_BASE + 0)
-#define IRQ_MMP2_PMIC			(IRQ_MMP2_PMIC_BASE + 1)
-
-/* secondary interrupt of INT #5 */
-#define IRQ_MMP2_RTC_BASE		(IRQ_MMP2_PMIC_BASE + 2)
-#define IRQ_MMP2_RTC_ALARM		(IRQ_MMP2_RTC_BASE + 0)
-#define IRQ_MMP2_RTC			(IRQ_MMP2_RTC_BASE + 1)
-
-/* secondary interrupt of INT #9 */
-#define IRQ_MMP2_KEYPAD_BASE		(IRQ_MMP2_RTC_BASE + 2)
-#define IRQ_MMP2_KPC			(IRQ_MMP2_KEYPAD_BASE + 0)
-#define IRQ_MMP2_ROTORY			(IRQ_MMP2_KEYPAD_BASE + 1)
-#define IRQ_MMP2_TBALL			(IRQ_MMP2_KEYPAD_BASE + 2)
-
-/* secondary interrupt of INT #17 */
-#define IRQ_MMP2_TWSI_BASE		(IRQ_MMP2_KEYPAD_BASE + 3)
-#define IRQ_MMP2_TWSI2			(IRQ_MMP2_TWSI_BASE + 0)
-#define IRQ_MMP2_TWSI3			(IRQ_MMP2_TWSI_BASE + 1)
-#define IRQ_MMP2_TWSI4			(IRQ_MMP2_TWSI_BASE + 2)
-#define IRQ_MMP2_TWSI5			(IRQ_MMP2_TWSI_BASE + 3)
-#define IRQ_MMP2_TWSI6			(IRQ_MMP2_TWSI_BASE + 4)
-
-/* secondary interrupt of INT #35 */
-#define IRQ_MMP2_MISC_BASE		(IRQ_MMP2_TWSI_BASE + 5)
-#define IRQ_MMP2_PERF			(IRQ_MMP2_MISC_BASE + 0)
-#define IRQ_MMP2_L2_PA_ECC		(IRQ_MMP2_MISC_BASE + 1)
-#define IRQ_MMP2_L2_ECC			(IRQ_MMP2_MISC_BASE + 2)
-#define IRQ_MMP2_L2_UECC		(IRQ_MMP2_MISC_BASE + 3)
-#define IRQ_MMP2_DDR			(IRQ_MMP2_MISC_BASE + 4)
-#define IRQ_MMP2_FAB0_TIMEOUT		(IRQ_MMP2_MISC_BASE + 5)
-#define IRQ_MMP2_FAB1_TIMEOUT		(IRQ_MMP2_MISC_BASE + 6)
-#define IRQ_MMP2_FAB2_TIMEOUT		(IRQ_MMP2_MISC_BASE + 7)
-#define IRQ_MMP2_THERMAL		(IRQ_MMP2_MISC_BASE + 9)
-#define IRQ_MMP2_MAIN_PMU		(IRQ_MMP2_MISC_BASE + 10)
-#define IRQ_MMP2_WDT2			(IRQ_MMP2_MISC_BASE + 11)
-#define IRQ_MMP2_CORESIGHT		(IRQ_MMP2_MISC_BASE + 12)
-#define IRQ_MMP2_COMMTX			(IRQ_MMP2_MISC_BASE + 13)
-#define IRQ_MMP2_COMMRX			(IRQ_MMP2_MISC_BASE + 14)
-
-/* secondary interrupt of INT #51 */
-#define IRQ_MMP2_MIPI_HSI1_BASE		(IRQ_MMP2_MISC_BASE + 15)
-#define IRQ_MMP2_HSI1_CAWAKE		(IRQ_MMP2_MIPI_HSI1_BASE + 0)
-#define IRQ_MMP2_MIPI_HSI_INT1		(IRQ_MMP2_MIPI_HSI1_BASE + 1)
-
-/* secondary interrupt of INT #55 */
-#define IRQ_MMP2_MIPI_HSI0_BASE		(IRQ_MMP2_MIPI_HSI1_BASE + 2)
-#define IRQ_MMP2_HSI0_CAWAKE		(IRQ_MMP2_MIPI_HSI0_BASE + 0)
-#define IRQ_MMP2_MIPI_HSI_INT0		(IRQ_MMP2_MIPI_HSI0_BASE + 1)
-
-#define IRQ_MMP2_MUX_END		(IRQ_MMP2_MIPI_HSI0_BASE + 2)
-
-#define IRQ_GPIO_START			128
-#define MMP_NR_BUILTIN_GPIO		192
-#define MMP_GPIO_TO_IRQ(gpio)		(IRQ_GPIO_START + (gpio))
-
-#define IRQ_BOARD_START			(IRQ_GPIO_START + MMP_NR_BUILTIN_GPIO)
-#define MMP_NR_IRQS			IRQ_BOARD_START
-
-#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
deleted file mode 100644
index 2578e176fd48..000000000000
--- a/arch/arm/mach-mmp/jasper.c
+++ /dev/null
@@ -1,185 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/jasper.c
- *
- *  Support for the Marvell Jasper Development Platform.
- *
- *  Copyright (C) 2009-2010 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio-pxa.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max8649.h>
-#include <linux/mfd/max8925.h>
-#include <linux/interrupt.h>
-
-#include "irqs.h"
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-mmp2.h"
-#include "mmp2.h"
-
-#include "common.h"
-
-#define JASPER_NR_IRQS		(MMP_NR_IRQS + 48)
-
-static unsigned long jasper_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO29_UART1_RXD,
-	GPIO30_UART1_TXD,
-
-	/* UART3 */
-	GPIO51_UART3_RXD,
-	GPIO52_UART3_TXD,
-
-	/* DFI */
-	GPIO168_DFI_D0,
-	GPIO167_DFI_D1,
-	GPIO166_DFI_D2,
-	GPIO165_DFI_D3,
-	GPIO107_DFI_D4,
-	GPIO106_DFI_D5,
-	GPIO105_DFI_D6,
-	GPIO104_DFI_D7,
-	GPIO111_DFI_D8,
-	GPIO164_DFI_D9,
-	GPIO163_DFI_D10,
-	GPIO162_DFI_D11,
-	GPIO161_DFI_D12,
-	GPIO110_DFI_D13,
-	GPIO109_DFI_D14,
-	GPIO108_DFI_D15,
-	GPIO143_ND_nCS0,
-	GPIO144_ND_nCS1,
-	GPIO147_ND_nWE,
-	GPIO148_ND_nRE,
-	GPIO150_ND_ALE,
-	GPIO149_ND_CLE,
-	GPIO112_ND_RDY0,
-	GPIO160_ND_RDY1,
-
-	/* PMIC */
-	PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
-
-	/* MMC1 */
-	GPIO131_MMC1_DAT3,
-	GPIO132_MMC1_DAT2,
-	GPIO133_MMC1_DAT1,
-	GPIO134_MMC1_DAT0,
-	GPIO136_MMC1_CMD,
-	GPIO139_MMC1_CLK,
-	GPIO140_MMC1_CD,
-	GPIO141_MMC1_WP,
-
-	/* MMC2 */
-	GPIO37_MMC2_DAT3,
-	GPIO38_MMC2_DAT2,
-	GPIO39_MMC2_DAT1,
-	GPIO40_MMC2_DAT0,
-	GPIO41_MMC2_CMD,
-	GPIO42_MMC2_CLK,
-
-	/* MMC3 */
-	GPIO165_MMC3_DAT7,
-	GPIO162_MMC3_DAT6,
-	GPIO166_MMC3_DAT5,
-	GPIO163_MMC3_DAT4,
-	GPIO167_MMC3_DAT3,
-	GPIO164_MMC3_DAT2,
-	GPIO168_MMC3_DAT1,
-	GPIO111_MMC3_DAT0,
-	GPIO112_MMC3_CMD,
-	GPIO151_MMC3_CLK,
-};
-
-static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct regulator_consumer_supply max8649_supply[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data max8649_init_data = {
-	.constraints	= {
-		.name		= "vcc_core range",
-		.min_uV		= 1150000,
-		.max_uV		= 1280000,
-		.always_on	= 1,
-		.boot_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8649_supply[0],
-};
-
-static struct max8649_platform_data jasper_max8649_info = {
-	.mode		= 2,	/* VID1 = 1, VID0 = 0 */
-	.extclk		= 0,
-	.ramp_timing	= MAX8649_RAMP_32MV,
-	.regulator	= &max8649_init_data,
-};
-
-static struct max8925_backlight_pdata jasper_backlight_data = {
-	.dual_string	= 0,
-};
-
-static struct max8925_power_pdata jasper_power_data = {
-	.batt_detect		= 0,	/* can't detect battery by ID pin */
-	.topoff_threshold	= MAX8925_TOPOFF_THR_10PER,
-	.fast_charge		= MAX8925_FCHG_1000MA,
-};
-
-static struct max8925_platform_data jasper_max8925_info = {
-	.backlight		= &jasper_backlight_data,
-	.power			= &jasper_power_data,
-	.irq_base		= MMP_NR_IRQS,
-};
-
-static struct i2c_board_info jasper_twsi1_info[] = {
-	[0] = {
-		.type		= "max8649",
-		.addr		= 0x60,
-		.platform_data	= &jasper_max8649_info,
-	},
-	[1] = {
-		.type		= "max8925",
-		.addr		= 0x3c,
-		.irq		= IRQ_MMP2_PMIC,
-		.platform_data	= &jasper_max8925_info,
-	},
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
-	.clk_delay_cycles = 0x1f,
-};
-
-static void __init jasper_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(jasper_pin_config));
-
-	/* on-chip devices */
-	mmp2_add_uart(1);
-	mmp2_add_uart(3);
-	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info));
-	platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&mmp2_device_gpio);
-	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
-
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= JASPER_NR_IRQS,
-	.init_irq       = mmp2_init_irq,
-	.init_time	= mmp2_timer_init,
-	.init_machine   = jasper_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/mfp-mmp2.h b/arch/arm/mach-mmp/mfp-mmp2.h
deleted file mode 100644
index 1620222981e3..000000000000
--- a/arch/arm/mach-mmp/mfp-mmp2.h
+++ /dev/null
@@ -1,396 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MFP_MMP2_H
-#define __ASM_MACH_MFP_MMP2_H
-
-#include "mfp.h"
-
-#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
-#define MFP_DRIVE_SLOW		(0x2 << 13)
-#define MFP_DRIVE_MEDIUM	(0x4 << 13)
-#define MFP_DRIVE_FAST		(0x6 << 13)
-
-/* GPIO */
-#define GPIO0_GPIO	MFP_CFG(GPIO0, AF0)
-#define GPIO1_GPIO	MFP_CFG(GPIO1, AF0)
-#define GPIO2_GPIO	MFP_CFG(GPIO2, AF0)
-#define GPIO3_GPIO	MFP_CFG(GPIO3, AF0)
-#define GPIO4_GPIO	MFP_CFG(GPIO4, AF0)
-#define GPIO5_GPIO	MFP_CFG(GPIO5, AF0)
-#define GPIO6_GPIO	MFP_CFG(GPIO6, AF0)
-#define GPIO7_GPIO	MFP_CFG(GPIO7, AF0)
-#define GPIO8_GPIO	MFP_CFG(GPIO8, AF0)
-#define GPIO9_GPIO	MFP_CFG(GPIO9, AF0)
-#define GPIO10_GPIO	MFP_CFG(GPIO10, AF0)
-#define GPIO11_GPIO	MFP_CFG(GPIO11, AF0)
-#define GPIO12_GPIO	MFP_CFG(GPIO12, AF0)
-#define GPIO13_GPIO	MFP_CFG(GPIO13, AF0)
-#define GPIO14_GPIO	MFP_CFG(GPIO14, AF0)
-#define GPIO15_GPIO	MFP_CFG(GPIO15, AF0)
-#define GPIO16_GPIO	MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO	MFP_CFG(GPIO17, AF0)
-#define GPIO18_GPIO	MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO	MFP_CFG(GPIO19, AF0)
-#define GPIO20_GPIO	MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO	MFP_CFG(GPIO21, AF0)
-#define GPIO22_GPIO	MFP_CFG(GPIO22, AF0)
-#define GPIO23_GPIO	MFP_CFG(GPIO23, AF0)
-#define GPIO24_GPIO	MFP_CFG(GPIO24, AF0)
-#define GPIO25_GPIO	MFP_CFG(GPIO25, AF0)
-#define GPIO26_GPIO	MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO	MFP_CFG(GPIO27, AF0)
-#define GPIO28_GPIO	MFP_CFG(GPIO28, AF0)
-#define GPIO29_GPIO	MFP_CFG(GPIO29, AF0)
-#define GPIO30_GPIO	MFP_CFG(GPIO30, AF0)
-#define GPIO31_GPIO	MFP_CFG(GPIO31, AF0)
-#define GPIO32_GPIO	MFP_CFG(GPIO32, AF0)
-#define GPIO33_GPIO	MFP_CFG(GPIO33, AF0)
-#define GPIO34_GPIO	MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO	MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO	MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO	MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO	MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO	MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO	MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO	MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO	MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO	MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO	MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO	MFP_CFG(GPIO45, AF0)
-#define GPIO46_GPIO	MFP_CFG(GPIO46, AF0)
-#define GPIO47_GPIO	MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO	MFP_CFG(GPIO48, AF0)
-#define GPIO49_GPIO	MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO	MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO	MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO	MFP_CFG(GPIO52, AF0)
-#define GPIO53_GPIO	MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO	MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO	MFP_CFG(GPIO55, AF0)
-#define GPIO56_GPIO	MFP_CFG(GPIO56, AF0)
-#define GPIO57_GPIO	MFP_CFG(GPIO57, AF0)
-#define GPIO58_GPIO	MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO	MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO	MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO	MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO	MFP_CFG(GPIO62, AF0)
-#define GPIO63_GPIO	MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO	MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO	MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO	MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO	MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO	MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO	MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO	MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO	MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO	MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO	MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO	MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO	MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO	MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO	MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO	MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO	MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO	MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO	MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO	MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO	MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO	MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO	MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO	MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO	MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO	MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO	MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO	MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO	MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO	MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO	MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO	MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO	MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO	MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO	MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO	MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO	MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO	MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO	MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO	MFP_CFG(GPIO102, AF1)
-#define GPIO103_GPIO	MFP_CFG(GPIO103, AF1)
-#define GPIO104_GPIO	MFP_CFG(GPIO104, AF1)
-#define GPIO105_GPIO	MFP_CFG(GPIO105, AF1)
-#define GPIO106_GPIO	MFP_CFG(GPIO106, AF1)
-#define GPIO107_GPIO	MFP_CFG(GPIO107, AF1)
-#define GPIO108_GPIO	MFP_CFG(GPIO108, AF1)
-#define GPIO109_GPIO	MFP_CFG(GPIO109, AF1)
-#define GPIO110_GPIO	MFP_CFG(GPIO110, AF1)
-#define GPIO111_GPIO	MFP_CFG(GPIO111, AF1)
-#define GPIO112_GPIO	MFP_CFG(GPIO112, AF1)
-#define GPIO113_GPIO	MFP_CFG(GPIO113, AF1)
-#define GPIO114_GPIO	MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO	MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO	MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO	MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO	MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO	MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO	MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO	MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO	MFP_CFG(GPIO122, AF0)
-#define GPIO123_GPIO	MFP_CFG(GPIO123, AF0)
-#define GPIO124_GPIO	MFP_CFG(GPIO124, AF0)
-#define GPIO125_GPIO	MFP_CFG(GPIO125, AF0)
-#define GPIO126_GPIO	MFP_CFG(GPIO126, AF0)
-#define GPIO127_GPIO	MFP_CFG(GPIO127, AF0)
-#define GPIO128_GPIO	MFP_CFG(GPIO128, AF0)
-#define GPIO129_GPIO	MFP_CFG(GPIO129, AF0)
-#define GPIO130_GPIO	MFP_CFG(GPIO130, AF0)
-#define GPIO131_GPIO	MFP_CFG(GPIO131, AF0)
-#define GPIO132_GPIO	MFP_CFG(GPIO132, AF0)
-#define GPIO133_GPIO	MFP_CFG(GPIO133, AF0)
-#define GPIO134_GPIO	MFP_CFG(GPIO134, AF0)
-#define GPIO135_GPIO	MFP_CFG(GPIO135, AF0)
-#define GPIO136_GPIO	MFP_CFG(GPIO136, AF0)
-#define GPIO137_GPIO	MFP_CFG(GPIO137, AF0)
-#define GPIO138_GPIO	MFP_CFG(GPIO138, AF0)
-#define GPIO139_GPIO	MFP_CFG(GPIO139, AF0)
-#define GPIO140_GPIO	MFP_CFG(GPIO140, AF0)
-#define GPIO141_GPIO	MFP_CFG(GPIO141, AF0)
-#define GPIO142_GPIO	MFP_CFG(GPIO142, AF1)
-#define GPIO143_GPIO	MFP_CFG(GPIO143, AF1)
-#define GPIO144_GPIO	MFP_CFG(GPIO144, AF1)
-#define GPIO145_GPIO	MFP_CFG(GPIO145, AF1)
-#define GPIO146_GPIO	MFP_CFG(GPIO146, AF1)
-#define GPIO147_GPIO	MFP_CFG(GPIO147, AF1)
-#define GPIO148_GPIO	MFP_CFG(GPIO148, AF1)
-#define GPIO149_GPIO	MFP_CFG(GPIO149, AF1)
-#define GPIO150_GPIO	MFP_CFG(GPIO150, AF1)
-#define GPIO151_GPIO	MFP_CFG(GPIO151, AF1)
-#define GPIO152_GPIO	MFP_CFG(GPIO152, AF1)
-#define GPIO153_GPIO	MFP_CFG(GPIO153, AF1)
-#define GPIO154_GPIO	MFP_CFG(GPIO154, AF1)
-#define GPIO155_GPIO	MFP_CFG(GPIO155, AF1)
-#define GPIO156_GPIO	MFP_CFG(GPIO156, AF1)
-#define GPIO157_GPIO	MFP_CFG(GPIO157, AF1)
-#define GPIO158_GPIO	MFP_CFG(GPIO158, AF1)
-#define GPIO159_GPIO	MFP_CFG(GPIO159, AF1)
-#define GPIO160_GPIO	MFP_CFG(GPIO160, AF1)
-#define GPIO161_GPIO	MFP_CFG(GPIO161, AF1)
-#define GPIO162_GPIO	MFP_CFG(GPIO162, AF1)
-#define GPIO163_GPIO	MFP_CFG(GPIO163, AF1)
-#define GPIO164_GPIO	MFP_CFG(GPIO164, AF1)
-#define GPIO165_GPIO	MFP_CFG(GPIO165, AF1)
-#define GPIO166_GPIO	MFP_CFG(GPIO166, AF1)
-#define GPIO167_GPIO	MFP_CFG(GPIO167, AF1)
-#define GPIO168_GPIO	MFP_CFG(GPIO168, AF1)
-
-/* DFI */
-#define GPIO108_DFI_D15		MFP_CFG(GPIO108, AF0)
-#define GPIO109_DFI_D14		MFP_CFG(GPIO109, AF0)
-#define GPIO110_DFI_D13		MFP_CFG(GPIO110, AF0)
-#define GPIO161_DFI_D12		MFP_CFG(GPIO161, AF0)
-#define GPIO162_DFI_D11		MFP_CFG(GPIO162, AF0)
-#define GPIO163_DFI_D10		MFP_CFG(GPIO163, AF0)
-#define GPIO164_DFI_D9		MFP_CFG(GPIO164, AF0)
-#define GPIO111_DFI_D8		MFP_CFG(GPIO111, AF0)
-#define GPIO104_DFI_D7		MFP_CFG(GPIO104, AF0)
-#define GPIO105_DFI_D6		MFP_CFG(GPIO105, AF0)
-#define GPIO106_DFI_D5		MFP_CFG(GPIO106, AF0)
-#define GPIO107_DFI_D4		MFP_CFG(GPIO107, AF0)
-#define GPIO165_DFI_D3		MFP_CFG(GPIO165, AF0)
-#define GPIO166_DFI_D2		MFP_CFG(GPIO166, AF0)
-#define GPIO167_DFI_D1		MFP_CFG(GPIO167, AF0)
-#define GPIO168_DFI_D0		MFP_CFG(GPIO168, AF0)
-#define GPIO143_ND_nCS0		MFP_CFG(GPIO143, AF0)
-#define GPIO144_ND_nCS1		MFP_CFG(GPIO144, AF0)
-#define GPIO147_ND_nWE		MFP_CFG(GPIO147, AF0)
-#define GPIO148_ND_nRE		MFP_CFG(GPIO148, AF0)
-#define GPIO150_ND_ALE		MFP_CFG(GPIO150, AF0)
-#define GPIO149_ND_CLE		MFP_CFG(GPIO149, AF0)
-#define GPIO112_ND_RDY0		MFP_CFG(GPIO112, AF0)
-#define GPIO160_ND_RDY1		MFP_CFG(GPIO160, AF0)
-
-/* Static Memory Controller */
-#define GPIO145_SMC_nCS0	MFP_CFG(GPIO145, AF0)
-#define GPIO146_SMC_nCS1	MFP_CFG(GPIO146, AF0)
-#define GPIO152_SMC_BE0		MFP_CFG(GPIO152, AF0)
-#define GPIO153_SMC_BE1		MFP_CFG(GPIO153, AF0)
-#define GPIO154_SMC_IRQ		MFP_CFG(GPIO154, AF0)
-#define GPIO113_SMC_RDY		MFP_CFG(GPIO113, AF0)
-#define GPIO151_SMC_SCLK	MFP_CFG(GPIO151, AF0)
-
-/* Ethernet */
-#define GPIO155_SM_ADVMUX	MFP_CFG(GPIO155, AF2)
-
-/* UART1 */
-#define GPIO45_UART1_RXD	MFP_CFG(GPIO45, AF1)
-#define GPIO46_UART1_TXD	MFP_CFG(GPIO46, AF1)
-#define GPIO29_UART1_RXD	MFP_CFG(GPIO29, AF1)
-#define GPIO30_UART1_TXD	MFP_CFG(GPIO30, AF1)
-#define GPIO31_UART1_CTS	MFP_CFG(GPIO31, AF1)
-#define GPIO32_UART1_RTS	MFP_CFG(GPIO32, AF1)
-
-/* UART2 */
-#define GPIO47_UART2_RXD	MFP_CFG(GPIO47, AF1)
-#define GPIO48_UART2_TXD	MFP_CFG(GPIO48, AF1)
-#define GPIO49_UART2_CTS	MFP_CFG(GPIO49, AF1)
-#define GPIO50_UART2_RTS	MFP_CFG(GPIO50, AF1)
-
-/* UART3 */
-#define GPIO51_UART3_RXD	MFP_CFG(GPIO51, AF1)
-#define GPIO52_UART3_TXD	MFP_CFG(GPIO52, AF1)
-#define GPIO53_UART3_CTS	MFP_CFG(GPIO53, AF1)
-#define GPIO54_UART3_RTS	MFP_CFG(GPIO54, AF1)
-
-/* MMC1 */
-#define GPIO124_MMC1_DAT7	MFP_CFG_DRV(GPIO124, AF1, FAST)
-#define GPIO125_MMC1_DAT6	MFP_CFG_DRV(GPIO125, AF1, FAST)
-#define GPIO129_MMC1_DAT5	MFP_CFG_DRV(GPIO129, AF1, FAST)
-#define GPIO130_MMC1_DAT4	MFP_CFG_DRV(GPIO130, AF1, FAST)
-#define GPIO131_MMC1_DAT3	MFP_CFG_DRV(GPIO131, AF1, FAST)
-#define GPIO132_MMC1_DAT2	MFP_CFG_DRV(GPIO132, AF1, FAST)
-#define GPIO133_MMC1_DAT1	MFP_CFG_DRV(GPIO133, AF1, FAST)
-#define GPIO134_MMC1_DAT0	MFP_CFG_DRV(GPIO134, AF1, FAST)
-#define GPIO136_MMC1_CMD	MFP_CFG_DRV(GPIO136, AF1, FAST)
-#define GPIO139_MMC1_CLK	MFP_CFG_DRV(GPIO139, AF1, FAST)
-#define GPIO140_MMC1_CD		MFP_CFG_DRV(GPIO140, AF1, FAST)
-#define GPIO141_MMC1_WP		MFP_CFG_DRV(GPIO141, AF1, FAST)
-
-/*MMC2*/
-#define GPIO37_MMC2_DAT3	MFP_CFG_DRV(GPIO37, AF1, FAST)
-#define GPIO38_MMC2_DAT2	MFP_CFG_DRV(GPIO38, AF1, FAST)
-#define GPIO39_MMC2_DAT1	MFP_CFG_DRV(GPIO39, AF1, FAST)
-#define GPIO40_MMC2_DAT0	MFP_CFG_DRV(GPIO40, AF1, FAST)
-#define GPIO41_MMC2_CMD		MFP_CFG_DRV(GPIO41, AF1, FAST)
-#define GPIO42_MMC2_CLK		MFP_CFG_DRV(GPIO42, AF1, FAST)
-
-/*MMC3*/
-#define GPIO165_MMC3_DAT7	MFP_CFG_DRV(GPIO165, AF2, FAST)
-#define GPIO162_MMC3_DAT6	MFP_CFG_DRV(GPIO162, AF2, FAST)
-#define GPIO166_MMC3_DAT5	MFP_CFG_DRV(GPIO166, AF2, FAST)
-#define GPIO163_MMC3_DAT4	MFP_CFG_DRV(GPIO163, AF2, FAST)
-#define GPIO167_MMC3_DAT3	MFP_CFG_DRV(GPIO167, AF2, FAST)
-#define GPIO164_MMC3_DAT2	MFP_CFG_DRV(GPIO164, AF2, FAST)
-#define GPIO168_MMC3_DAT1	MFP_CFG_DRV(GPIO168, AF2, FAST)
-#define GPIO111_MMC3_DAT0	MFP_CFG_DRV(GPIO111, AF2, FAST)
-#define GPIO112_MMC3_CMD	MFP_CFG_DRV(GPIO112, AF2, FAST)
-#define GPIO151_MMC3_CLK	MFP_CFG_DRV(GPIO151, AF2, FAST)
-
-/* LCD */
-#define GPIO74_LCD_FCLK		MFP_CFG_DRV(GPIO74, AF1, FAST)
-#define GPIO75_LCD_LCLK		MFP_CFG_DRV(GPIO75, AF1, FAST)
-#define GPIO76_LCD_PCLK		MFP_CFG_DRV(GPIO76, AF1, FAST)
-#define GPIO77_LCD_DENA		MFP_CFG_DRV(GPIO77, AF1, FAST)
-#define GPIO78_LCD_DD0		MFP_CFG_DRV(GPIO78, AF1, FAST)
-#define GPIO79_LCD_DD1		MFP_CFG_DRV(GPIO79, AF1, FAST)
-#define GPIO80_LCD_DD2		MFP_CFG_DRV(GPIO80, AF1, FAST)
-#define GPIO81_LCD_DD3		MFP_CFG_DRV(GPIO81, AF1, FAST)
-#define GPIO82_LCD_DD4		MFP_CFG_DRV(GPIO82, AF1, FAST)
-#define GPIO83_LCD_DD5		MFP_CFG_DRV(GPIO83, AF1, FAST)
-#define GPIO84_LCD_DD6		MFP_CFG_DRV(GPIO84, AF1, FAST)
-#define GPIO85_LCD_DD7		MFP_CFG_DRV(GPIO85, AF1, FAST)
-#define GPIO86_LCD_DD8		MFP_CFG_DRV(GPIO86, AF1, FAST)
-#define GPIO87_LCD_DD9		MFP_CFG_DRV(GPIO87, AF1, FAST)
-#define GPIO88_LCD_DD10		MFP_CFG_DRV(GPIO88, AF1, FAST)
-#define GPIO89_LCD_DD11		MFP_CFG_DRV(GPIO89, AF1, FAST)
-#define GPIO90_LCD_DD12		MFP_CFG_DRV(GPIO90, AF1, FAST)
-#define GPIO91_LCD_DD13		MFP_CFG_DRV(GPIO91, AF1, FAST)
-#define GPIO92_LCD_DD14		MFP_CFG_DRV(GPIO92, AF1, FAST)
-#define GPIO93_LCD_DD15		MFP_CFG_DRV(GPIO93, AF1, FAST)
-#define GPIO94_LCD_DD16		MFP_CFG_DRV(GPIO94, AF1, FAST)
-#define GPIO95_LCD_DD17		MFP_CFG_DRV(GPIO95, AF1, FAST)
-#define GPIO96_LCD_DD18		MFP_CFG_DRV(GPIO96, AF1, FAST)
-#define GPIO97_LCD_DD19		MFP_CFG_DRV(GPIO97, AF1, FAST)
-#define GPIO98_LCD_DD20		MFP_CFG_DRV(GPIO98, AF1, FAST)
-#define GPIO99_LCD_DD21		MFP_CFG_DRV(GPIO99, AF1, FAST)
-#define GPIO100_LCD_DD22	MFP_CFG_DRV(GPIO100, AF1, FAST)
-#define GPIO101_LCD_DD23	MFP_CFG_DRV(GPIO101, AF1, FAST)
-#define GPIO94_SPI_DCLK		MFP_CFG_DRV(GPIO94, AF3, FAST)
-#define GPIO95_SPI_CS0		MFP_CFG_DRV(GPIO95, AF3, FAST)
-#define GPIO96_SPI_DIN		MFP_CFG_DRV(GPIO96, AF3, FAST)
-#define GPIO97_SPI_DOUT		MFP_CFG_DRV(GPIO97, AF3, FAST)
-#define GPIO98_LCD_RST		MFP_CFG_DRV(GPIO98, AF0, FAST)
-
-#define GPIO114_MN_CLK_OUT	MFP_CFG_DRV(GPIO114, AF1, FAST)
-
-/*LCD TV path*/
-#define GPIO124_LCD_DD24	MFP_CFG_DRV(GPIO124, AF2, FAST)
-#define GPIO125_LCD_DD25	MFP_CFG_DRV(GPIO125, AF2, FAST)
-#define GPIO126_LCD_DD33	MFP_CFG_DRV(GPIO126, AF2, FAST)
-#define GPIO127_LCD_DD26	MFP_CFG_DRV(GPIO127, AF2, FAST)
-#define GPIO128_LCD_DD27	MFP_CFG_DRV(GPIO128, AF2, FAST)
-#define GPIO129_LCD_DD28	MFP_CFG_DRV(GPIO129, AF2, FAST)
-#define GPIO130_LCD_DD29	MFP_CFG_DRV(GPIO130, AF2, FAST)
-#define GPIO135_LCD_DD30	MFP_CFG_DRV(GPIO135, AF2, FAST)
-#define GPIO137_LCD_DD31	MFP_CFG_DRV(GPIO137, AF2, FAST)
-#define GPIO138_LCD_DD32	MFP_CFG_DRV(GPIO138, AF2, FAST)
-#define GPIO140_LCD_DD34	MFP_CFG_DRV(GPIO140, AF2, FAST)
-#define GPIO141_LCD_DD35	MFP_CFG_DRV(GPIO141, AF2, FAST)
-
-/* I2C */
-#define GPIO43_TWSI2_SCL	MFP_CFG_DRV(GPIO43, AF1, SLOW)
-#define GPIO44_TWSI2_SDA	MFP_CFG_DRV(GPIO44, AF1, SLOW)
-#define GPIO71_TWSI3_SCL	MFP_CFG_DRV(GPIO71, AF1, SLOW)
-#define GPIO72_TWSI3_SDA	MFP_CFG_DRV(GPIO72, AF1, SLOW)
-#define TWSI4_SCL		MFP_CFG_DRV(TWSI4_SCL, AF0, SLOW)
-#define TWSI4_SDA		MFP_CFG_DRV(TWSI4_SDA, AF0, SLOW)
-#define GPIO99_TWSI5_SCL	MFP_CFG_DRV(GPIO99, AF4, SLOW)
-#define GPIO100_TWSI5_SDA	MFP_CFG_DRV(GPIO100, AF4, SLOW)
-#define GPIO97_TWSI6_SCL	MFP_CFG_DRV(GPIO97, AF2, SLOW)
-#define GPIO98_TWSI6_SDA	MFP_CFG_DRV(GPIO98, AF2, SLOW)
-
-/* SSPA1 */
-#define GPIO24_I2S_SYSCLK	MFP_CFG(GPIO24, AF1)
-#define GPIO25_I2S_BITCLK	MFP_CFG(GPIO25, AF1)
-#define GPIO26_I2S_SYNC		MFP_CFG(GPIO26, AF1)
-#define GPIO27_I2S_DATA_OUT	MFP_CFG(GPIO27, AF1)
-#define GPIO28_I2S_SDATA_IN	MFP_CFG(GPIO28, AF1)
-#define GPIO114_I2S_MCLK	MFP_CFG(GPIO114, AF1)
-
-/* SSPA2 */
-#define GPIO33_SSPA2_CLK	MFP_CFG(GPIO33, AF1)
-#define GPIO34_SSPA2_FRM	MFP_CFG(GPIO34, AF1)
-#define GPIO35_SSPA2_TXD	MFP_CFG(GPIO35, AF1)
-#define GPIO36_SSPA2_RXD	MFP_CFG(GPIO36, AF1)
-
-/* Keypad */
-#define GPIO00_KP_MKIN0		MFP_CFG(GPIO0, AF1)
-#define GPIO01_KP_MKOUT0	MFP_CFG(GPIO1, AF1)
-#define GPIO02_KP_MKIN1		MFP_CFG(GPIO2, AF1)
-#define GPIO03_KP_MKOUT1	MFP_CFG(GPIO3, AF1)
-#define GPIO04_KP_MKIN2		MFP_CFG(GPIO4, AF1)
-#define GPIO05_KP_MKOUT2	MFP_CFG(GPIO5, AF1)
-#define GPIO06_KP_MKIN3		MFP_CFG(GPIO6, AF1)
-#define GPIO07_KP_MKOUT3	MFP_CFG(GPIO7, AF1)
-#define GPIO08_KP_MKIN4		MFP_CFG(GPIO8, AF1)
-#define GPIO09_KP_MKOUT4	MFP_CFG(GPIO9, AF1)
-#define GPIO10_KP_MKIN5		MFP_CFG(GPIO10, AF1)
-#define GPIO11_KP_MKOUT5	MFP_CFG(GPIO11, AF1)
-#define GPIO12_KP_MKIN6		MFP_CFG(GPIO12, AF1)
-#define GPIO13_KP_MKOUT6	MFP_CFG(GPIO13, AF1)
-#define GPIO14_KP_MKIN7		MFP_CFG(GPIO14, AF1)
-#define GPIO15_KP_MKOUT7	MFP_CFG(GPIO15, AF1)
-#define GPIO16_KP_DKIN0		MFP_CFG(GPIO16, AF1)
-#define GPIO17_KP_DKIN1		MFP_CFG(GPIO17, AF1)
-#define GPIO18_KP_DKIN2		MFP_CFG(GPIO18, AF1)
-#define GPIO19_KP_DKIN3		MFP_CFG(GPIO19, AF1)
-#define GPIO20_KP_DKIN4		MFP_CFG(GPIO20, AF1)
-#define GPIO21_KP_DKIN5		MFP_CFG(GPIO21, AF1)
-#define GPIO22_KP_DKIN6		MFP_CFG(GPIO22, AF1)
-#define GPIO23_KP_DKIN7		MFP_CFG(GPIO23, AF1)
-
-/* CAMERA */
-#define GPIO59_CCIC_IN7		MFP_CFG_DRV(GPIO59, AF1, FAST)
-#define GPIO60_CCIC_IN6		MFP_CFG_DRV(GPIO60, AF1, FAST)
-#define GPIO61_CCIC_IN5		MFP_CFG_DRV(GPIO61, AF1, FAST)
-#define GPIO62_CCIC_IN4		MFP_CFG_DRV(GPIO62, AF1, FAST)
-#define GPIO63_CCIC_IN3		MFP_CFG_DRV(GPIO63, AF1, FAST)
-#define GPIO64_CCIC_IN2		MFP_CFG_DRV(GPIO64, AF1, FAST)
-#define GPIO65_CCIC_IN1		MFP_CFG_DRV(GPIO65, AF1, FAST)
-#define GPIO66_CCIC_IN0		MFP_CFG_DRV(GPIO66, AF1, FAST)
-#define GPIO67_CAM_HSYNC	MFP_CFG_DRV(GPIO67, AF1, FAST)
-#define GPIO68_CAM_VSYNC	MFP_CFG_DRV(GPIO68, AF1, FAST)
-#define GPIO69_CAM_MCLK		MFP_CFG_DRV(GPIO69, AF1, FAST)
-#define GPIO70_CAM_PCLK		MFP_CFG_DRV(GPIO70, AF1, FAST)
-
-/* PMIC */
-#define PMIC_PMIC_INT		MFP_CFG(PMIC_INT, AF0)
-
-#endif /* __ASM_MACH_MFP_MMP2_H */
-
diff --git a/arch/arm/mach-mmp/mfp-pxa168.h b/arch/arm/mach-mmp/mfp-pxa168.h
deleted file mode 100644
index 90d16d3419a4..000000000000
--- a/arch/arm/mach-mmp/mfp-pxa168.h
+++ /dev/null
@@ -1,355 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MFP_PXA168_H
-#define __ASM_MACH_MFP_PXA168_H
-
-#include "mfp.h"
-
-#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
-#define MFP_DRIVE_SLOW		(0x1 << 13)
-#define MFP_DRIVE_MEDIUM	(0x2 << 13)
-#define MFP_DRIVE_FAST		(0x3 << 13)
-
-#undef MFP_CFG
-#undef MFP_CFG_DRV
-
-#define MFP_CFG(pin, af)		\
-	(MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM)
-
-#define MFP_CFG_DRV(pin, af, drv)	\
-	(MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv)
-
-/* GPIO */
-#define GPIO0_GPIO		MFP_CFG(GPIO0, AF5)
-#define GPIO1_GPIO		MFP_CFG(GPIO1, AF5)
-#define GPIO2_GPIO		MFP_CFG(GPIO2, AF5)
-#define GPIO3_GPIO		MFP_CFG(GPIO3, AF5)
-#define GPIO4_GPIO		MFP_CFG(GPIO4, AF5)
-#define GPIO5_GPIO		MFP_CFG(GPIO5, AF5)
-#define GPIO6_GPIO		MFP_CFG(GPIO6, AF5)
-#define GPIO7_GPIO		MFP_CFG(GPIO7, AF5)
-#define GPIO8_GPIO		MFP_CFG(GPIO8, AF5)
-#define GPIO9_GPIO		MFP_CFG(GPIO9, AF5)
-#define GPIO10_GPIO		MFP_CFG(GPIO10, AF5)
-#define GPIO11_GPIO		MFP_CFG(GPIO11, AF5)
-#define GPIO12_GPIO		MFP_CFG(GPIO12, AF5)
-#define GPIO13_GPIO		MFP_CFG(GPIO13, AF5)
-#define GPIO14_GPIO		MFP_CFG(GPIO14, AF5)
-#define GPIO15_GPIO		MFP_CFG(GPIO15, AF5)
-#define GPIO16_GPIO		MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO		MFP_CFG(GPIO17, AF5)
-#define GPIO18_GPIO		MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO		MFP_CFG(GPIO19, AF5)
-#define GPIO20_GPIO		MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO		MFP_CFG(GPIO21, AF5)
-#define GPIO22_GPIO		MFP_CFG(GPIO22, AF5)
-#define GPIO23_GPIO		MFP_CFG(GPIO23, AF5)
-#define GPIO24_GPIO		MFP_CFG(GPIO24, AF5)
-#define GPIO25_GPIO		MFP_CFG(GPIO25, AF5)
-#define GPIO26_GPIO		MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO		MFP_CFG(GPIO27, AF5)
-#define GPIO28_GPIO		MFP_CFG(GPIO28, AF5)
-#define GPIO29_GPIO		MFP_CFG(GPIO29, AF5)
-#define GPIO30_GPIO		MFP_CFG(GPIO30, AF5)
-#define GPIO31_GPIO		MFP_CFG(GPIO31, AF5)
-#define GPIO32_GPIO		MFP_CFG(GPIO32, AF5)
-#define GPIO33_GPIO		MFP_CFG(GPIO33, AF5)
-#define GPIO34_GPIO		MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO		MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO		MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO		MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO		MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO		MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO		MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO		MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO		MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO		MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO		MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO		MFP_CFG(GPIO45, AF0)
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
-#define GPIO47_GPIO		MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO		MFP_CFG(GPIO48, AF0)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
-#define GPIO53_GPIO		MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO		MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO		MFP_CFG(GPIO55, AF0)
-#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
-#define GPIO57_GPIO		MFP_CFG(GPIO57, AF0)
-#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
-#define GPIO63_GPIO		MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO		MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO		MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO		MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO		MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO		MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO		MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO		MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO		MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO		MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO		MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO		MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO		MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO		MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO		MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO		MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO		MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO		MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO		MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO		MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO		MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO		MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO		MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO		MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO		MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO		MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO		MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO		MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO		MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO		MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO		MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO		MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO		MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO		MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO		MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO		MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO		MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO		MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO		MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO		MFP_CFG(GPIO102, AF0)
-#define GPIO103_GPIO		MFP_CFG(GPIO103, AF0)
-#define GPIO104_GPIO		MFP_CFG(GPIO104, AF0)
-#define GPIO105_GPIO		MFP_CFG(GPIO105, AF0)
-#define GPIO106_GPIO		MFP_CFG(GPIO106, AF0)
-#define GPIO107_GPIO		MFP_CFG(GPIO107, AF0)
-#define GPIO108_GPIO		MFP_CFG(GPIO108, AF0)
-#define GPIO109_GPIO		MFP_CFG(GPIO109, AF0)
-#define GPIO110_GPIO		MFP_CFG(GPIO110, AF0)
-#define GPIO111_GPIO		MFP_CFG(GPIO111, AF0)
-#define GPIO112_GPIO		MFP_CFG(GPIO112, AF0)
-#define GPIO113_GPIO		MFP_CFG(GPIO113, AF0)
-#define GPIO114_GPIO		MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO		MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO		MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO		MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO		MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO		MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO		MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO		MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO		MFP_CFG(GPIO122, AF0)
-
-/* DFI */
-#define GPIO0_DFI_D15		MFP_CFG(GPIO0, AF0)
-#define GPIO1_DFI_D14		MFP_CFG(GPIO1, AF0)
-#define GPIO2_DFI_D13		MFP_CFG(GPIO2, AF0)
-#define GPIO3_DFI_D12		MFP_CFG(GPIO3, AF0)
-#define GPIO4_DFI_D11		MFP_CFG(GPIO4, AF0)
-#define GPIO5_DFI_D10		MFP_CFG(GPIO5, AF0)
-#define GPIO6_DFI_D9		MFP_CFG(GPIO6, AF0)
-#define GPIO7_DFI_D8		MFP_CFG(GPIO7, AF0)
-#define GPIO8_DFI_D7		MFP_CFG(GPIO8, AF0)
-#define GPIO9_DFI_D6		MFP_CFG(GPIO9, AF0)
-#define GPIO10_DFI_D5		MFP_CFG(GPIO10, AF0)
-#define GPIO11_DFI_D4		MFP_CFG(GPIO11, AF0)
-#define GPIO12_DFI_D3		MFP_CFG(GPIO12, AF0)
-#define GPIO13_DFI_D2		MFP_CFG(GPIO13, AF0)
-#define GPIO14_DFI_D1		MFP_CFG(GPIO14, AF0)
-#define GPIO15_DFI_D0		MFP_CFG(GPIO15, AF0)
-
-#define GPIO30_DFI_ADDR0	MFP_CFG(GPIO30, AF0)
-#define GPIO31_DFI_ADDR1	MFP_CFG(GPIO31, AF0)
-#define GPIO32_DFI_ADDR2	MFP_CFG(GPIO32, AF0)
-#define GPIO33_DFI_ADDR3	MFP_CFG(GPIO33, AF0)
-
-/* NAND */
-#define GPIO16_ND_nCS0		MFP_CFG(GPIO16, AF1)
-#define GPIO17_ND_nWE		MFP_CFG(GPIO17, AF0)
-#define GPIO21_ND_ALE		MFP_CFG(GPIO21, AF0)
-#define GPIO22_ND_CLE		MFP_CFG(GPIO22, AF0)
-#define GPIO24_ND_nRE		MFP_CFG(GPIO24, AF0)
-#define GPIO26_ND_RnB1		MFP_CFG(GPIO26, AF1)
-#define GPIO27_ND_RnB2		MFP_CFG(GPIO27, AF1)
-
-/* Static Memory Controller */
-#define GPIO18_SMC_nCS0		MFP_CFG(GPIO18, AF3)
-#define GPIO18_SMC_nCS1		MFP_CFG(GPIO18, AF2)
-#define GPIO16_SMC_nCS0		MFP_CFG(GPIO16, AF2)
-#define GPIO16_SMC_nCS1		MFP_CFG(GPIO16, AF3)
-#define GPIO19_SMC_nCS0		MFP_CFG(GPIO19, AF0)
-#define GPIO20_SMC_nCS1		MFP_CFG(GPIO20, AF2)
-#define GPIO23_SMC_nLUA		MFP_CFG(GPIO23, AF0)
-#define GPIO25_SMC_nLLA		MFP_CFG(GPIO25, AF0)
-#define GPIO27_SMC_IRQ		MFP_CFG(GPIO27, AF0)
-#define GPIO28_SMC_RDY		MFP_CFG(GPIO28, AF0)
-#define GPIO29_SMC_SCLK		MFP_CFG(GPIO29, AF0)
-#define GPIO34_SMC_nCS1		MFP_CFG(GPIO34, AF2)
-#define GPIO35_SMC_BE1		MFP_CFG(GPIO35, AF2)
-#define GPIO36_SMC_BE2		MFP_CFG(GPIO36, AF2)
-
-/* Compact Flash */
-#define GPIO19_CF_nCE1		MFP_CFG(GPIO19, AF3)
-#define GPIO20_CF_nCE2		MFP_CFG(GPIO20, AF3)
-#define GPIO23_CF_nALE		MFP_CFG(GPIO23, AF3)
-#define GPIO25_CF_nRESET	MFP_CFG(GPIO25, AF3)
-#define GPIO28_CF_RDY		MFP_CFG(GPIO28, AF3)
-#define GPIO29_CF_STSCH		MFP_CFG(GPIO29, AF3)
-#define GPIO30_CF_nREG		MFP_CFG(GPIO30, AF3)
-#define GPIO31_CF_nIOIS16	MFP_CFG(GPIO31, AF3)
-#define GPIO32_CF_nCD1		MFP_CFG(GPIO32, AF3)
-#define GPIO33_CF_nCD2		MFP_CFG(GPIO33, AF3)
-
-/* UART */
-#define GPIO8_UART3_TXD		MFP_CFG(GPIO8, AF2)
-#define GPIO9_UART3_RXD		MFP_CFG(GPIO9, AF2)
-#define GPIO1O_UART3_CTS	MFP_CFG(GPIO10, AF2)
-#define GPIO11_UART3_RTS	MFP_CFG(GPIO11, AF2)
-#define GPIO88_UART2_TXD	MFP_CFG(GPIO88, AF2)
-#define GPIO89_UART2_RXD	MFP_CFG(GPIO89, AF2)
-#define GPIO107_UART1_TXD	MFP_CFG_DRV(GPIO107, AF1, FAST)
-#define GPIO107_UART1_RXD	MFP_CFG_DRV(GPIO107, AF2, FAST)
-#define GPIO108_UART1_RXD	MFP_CFG_DRV(GPIO108, AF1, FAST)
-#define GPIO108_UART1_TXD	MFP_CFG_DRV(GPIO108, AF2, FAST)
-#define GPIO109_UART1_CTS	MFP_CFG(GPIO109, AF1)
-#define GPIO109_UART1_RTS	MFP_CFG(GPIO109, AF2)
-#define GPIO110_UART1_RTS	MFP_CFG(GPIO110, AF1)
-#define GPIO110_UART1_CTS	MFP_CFG(GPIO110, AF2)
-#define GPIO111_UART1_RI	MFP_CFG(GPIO111, AF1)
-#define GPIO111_UART1_DSR	MFP_CFG(GPIO111, AF2)
-#define GPIO112_UART1_DTR	MFP_CFG(GPIO111, AF1)
-#define GPIO112_UART1_DCD	MFP_CFG(GPIO112, AF2)
-
-/* MMC1 */
-#define GPIO37_MMC1_DAT7	MFP_CFG(GPIO37, AF1)
-#define GPIO38_MMC1_DAT6	MFP_CFG(GPIO38, AF1)
-#define GPIO54_MMC1_DAT5	MFP_CFG(GPIO54, AF1)
-#define GPIO48_MMC1_DAT4	MFP_CFG(GPIO48, AF1)
-#define GPIO51_MMC1_DAT3	MFP_CFG(GPIO51, AF1)
-#define GPIO52_MMC1_DAT2	MFP_CFG(GPIO52, AF1)
-#define GPIO40_MMC1_DAT1	MFP_CFG(GPIO40, AF1)
-#define GPIO41_MMC1_DAT0	MFP_CFG(GPIO41, AF1)
-#define GPIO49_MMC1_CMD		MFP_CFG(GPIO49, AF1)
-#define GPIO43_MMC1_CLK		MFP_CFG(GPIO43, AF1)
-#define GPIO53_MMC1_CD		MFP_CFG(GPIO53, AF1)
-#define GPIO46_MMC1_WP		MFP_CFG(GPIO46, AF1)
-
-/* MMC2 */
-#define	GPIO28_MMC2_CMD		MFP_CFG_DRV(GPIO28, AF6, FAST)
-#define	GPIO29_MMC2_CLK		MFP_CFG_DRV(GPIO29, AF6, FAST)
-#define	GPIO30_MMC2_DAT0	MFP_CFG_DRV(GPIO30, AF6, FAST)
-#define	GPIO31_MMC2_DAT1	MFP_CFG_DRV(GPIO31, AF6, FAST)
-#define	GPIO32_MMC2_DAT2	MFP_CFG_DRV(GPIO32, AF6, FAST)
-#define	GPIO33_MMC2_DAT3	MFP_CFG_DRV(GPIO33, AF6, FAST)
-
-/* MMC4 */
-#define GPIO125_MMC4_DAT3       MFP_CFG_DRV(GPIO125, AF7, FAST)
-#define GPIO126_MMC4_DAT2       MFP_CFG_DRV(GPIO126, AF7, FAST)
-#define GPIO127_MMC4_DAT1       MFP_CFG_DRV(GPIO127, AF7, FAST)
-#define GPIO0_2_MMC4_DAT0       MFP_CFG_DRV(GPIO0_2, AF7, FAST)
-#define GPIO1_2_MMC4_CMD        MFP_CFG_DRV(GPIO1_2, AF7, FAST)
-#define GPIO2_2_MMC4_CLK        MFP_CFG_DRV(GPIO2_2, AF7, FAST)
-
-/* LCD */
-#define GPIO84_LCD_CS		MFP_CFG(GPIO84, AF1)
-#define GPIO60_LCD_DD0		MFP_CFG(GPIO60, AF1)
-#define GPIO61_LCD_DD1		MFP_CFG(GPIO61, AF1)
-#define GPIO70_LCD_DD10		MFP_CFG(GPIO70, AF1)
-#define GPIO71_LCD_DD11		MFP_CFG(GPIO71, AF1)
-#define GPIO72_LCD_DD12		MFP_CFG(GPIO72, AF1)
-#define GPIO73_LCD_DD13		MFP_CFG(GPIO73, AF1)
-#define GPIO74_LCD_DD14		MFP_CFG(GPIO74, AF1)
-#define GPIO75_LCD_DD15		MFP_CFG(GPIO75, AF1)
-#define GPIO76_LCD_DD16		MFP_CFG(GPIO76, AF1)
-#define GPIO77_LCD_DD17		MFP_CFG(GPIO77, AF1)
-#define GPIO78_LCD_DD18		MFP_CFG(GPIO78, AF1)
-#define GPIO79_LCD_DD19		MFP_CFG(GPIO79, AF1)
-#define GPIO62_LCD_DD2		MFP_CFG(GPIO62, AF1)
-#define GPIO80_LCD_DD20		MFP_CFG(GPIO80, AF1)
-#define GPIO81_LCD_DD21		MFP_CFG(GPIO81, AF1)
-#define GPIO82_LCD_DD22		MFP_CFG(GPIO82, AF1)
-#define GPIO83_LCD_DD23		MFP_CFG(GPIO83, AF1)
-#define GPIO63_LCD_DD3		MFP_CFG(GPIO63, AF1)
-#define GPIO64_LCD_DD4		MFP_CFG(GPIO64, AF1)
-#define GPIO65_LCD_DD5		MFP_CFG(GPIO65, AF1)
-#define GPIO66_LCD_DD6		MFP_CFG(GPIO66, AF1)
-#define GPIO67_LCD_DD7		MFP_CFG(GPIO67, AF1)
-#define GPIO68_LCD_DD8		MFP_CFG(GPIO68, AF1)
-#define GPIO69_LCD_DD9		MFP_CFG(GPIO69, AF1)
-#define GPIO59_LCD_DENA_BIAS	MFP_CFG(GPIO59, AF1)
-#define GPIO56_LCD_FCLK_RD	MFP_CFG(GPIO56, AF1)
-#define GPIO57_LCD_LCLK_A0	MFP_CFG(GPIO57, AF1)
-#define GPIO58_LCD_PCLK_WR	MFP_CFG(GPIO58, AF1)
-#define GPIO85_LCD_VSYNC	MFP_CFG(GPIO85, AF1)
-
-/* I2C */
-#define GPIO105_CI2C_SDA	MFP_CFG(GPIO105, AF1)
-#define GPIO106_CI2C_SCL	MFP_CFG(GPIO106, AF1)
-
-/* I2S */
-#define GPIO113_I2S_MCLK	MFP_CFG(GPIO113, AF6)
-#define GPIO114_I2S_FRM		MFP_CFG(GPIO114, AF1)
-#define GPIO115_I2S_BCLK	MFP_CFG(GPIO115, AF1)
-#define GPIO116_I2S_RXD		MFP_CFG(GPIO116, AF2)
-#define GPIO116_I2S_TXD         MFP_CFG(GPIO116, AF1)
-#define GPIO117_I2S_TXD		MFP_CFG(GPIO117, AF2)
-
-/* PWM */
-#define GPIO96_PWM3_OUT		MFP_CFG(GPIO96, AF1)
-#define GPIO97_PWM2_OUT		MFP_CFG(GPIO97, AF1)
-#define GPIO98_PWM1_OUT		MFP_CFG(GPIO98, AF1)
-#define GPIO104_PWM4_OUT	MFP_CFG(GPIO104, AF1)
-#define GPIO106_PWM2_OUT	MFP_CFG(GPIO106, AF2)
-#define GPIO74_PWM4_OUT		MFP_CFG(GPIO74, AF2)
-#define GPIO75_PWM3_OUT		MFP_CFG(GPIO75, AF2)
-#define GPIO76_PWM2_OUT		MFP_CFG(GPIO76, AF2)
-#define GPIO77_PWM1_OUT		MFP_CFG(GPIO77, AF2)
-#define GPIO82_PWM4_OUT		MFP_CFG(GPIO82, AF2)
-#define GPIO83_PWM3_OUT		MFP_CFG(GPIO83, AF2)
-#define GPIO84_PWM2_OUT		MFP_CFG(GPIO84, AF2)
-#define GPIO85_PWM1_OUT		MFP_CFG(GPIO85, AF2)
-#define GPIO84_PWM1_OUT		MFP_CFG(GPIO84, AF4)
-#define GPIO122_PWM3_OUT	MFP_CFG(GPIO122, AF3)
-#define GPIO123_PWM1_OUT	MFP_CFG(GPIO123, AF1)
-#define GPIO124_PWM2_OUT	MFP_CFG(GPIO124, AF1)
-#define GPIO125_PWM3_OUT	MFP_CFG(GPIO125, AF1)
-#define GPIO126_PWM4_OUT	MFP_CFG(GPIO126, AF1)
-#define GPIO86_PWM1_OUT		MFP_CFG(GPIO86, AF2)
-#define GPIO86_PWM2_OUT		MFP_CFG(GPIO86, AF3)
-
-/* Keypad */
-#define GPIO109_KP_MKIN1        MFP_CFG(GPIO109, AF7)
-#define GPIO110_KP_MKIN0        MFP_CFG(GPIO110, AF7)
-#define GPIO111_KP_MKOUT7       MFP_CFG(GPIO111, AF7)
-#define GPIO112_KP_MKOUT6       MFP_CFG(GPIO112, AF7)
-#define GPIO121_KP_MKIN4        MFP_CFG(GPIO121, AF7)
-
-/* Fast Ethernet */
-#define GPIO86_TX_CLK		MFP_CFG(GPIO86, AF5)
-#define GPIO87_TX_EN		MFP_CFG(GPIO87, AF5)
-#define GPIO88_TX_DQ3		MFP_CFG(GPIO88, AF5)
-#define GPIO89_TX_DQ2		MFP_CFG(GPIO89, AF5)
-#define GPIO90_TX_DQ1		MFP_CFG(GPIO90, AF5)
-#define GPIO91_TX_DQ0		MFP_CFG(GPIO91, AF5)
-#define GPIO92_MII_CRS		MFP_CFG(GPIO92, AF5)
-#define GPIO93_MII_COL		MFP_CFG(GPIO93, AF5)
-#define GPIO94_RX_CLK		MFP_CFG(GPIO94, AF5)
-#define GPIO95_RX_ER		MFP_CFG(GPIO95, AF5)
-#define GPIO96_RX_DQ3		MFP_CFG(GPIO96, AF5)
-#define GPIO97_RX_DQ2		MFP_CFG(GPIO97, AF5)
-#define GPIO98_RX_DQ1		MFP_CFG(GPIO98, AF5)
-#define GPIO99_RX_DQ0		MFP_CFG(GPIO99, AF5)
-#define GPIO100_MII_MDC		MFP_CFG(GPIO100, AF5)
-#define GPIO101_MII_MDIO	MFP_CFG(GPIO101, AF5)
-#define GPIO103_RX_DV		MFP_CFG(GPIO103, AF5)
-
-/* SSP2 */
-#define GPIO107_SSP2_RXD	MFP_CFG(GPIO107, AF4)
-#define GPIO108_SSP2_TXD	MFP_CFG(GPIO108, AF4)
-#define GPIO111_SSP2_CLK	MFP_CFG(GPIO111, AF4)
-#define GPIO112_SSP2_FRM	MFP_CFG(GPIO112, AF4)
-
-#endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/mfp-pxa910.h b/arch/arm/mach-mmp/mfp-pxa910.h
deleted file mode 100644
index 6f900cade631..000000000000
--- a/arch/arm/mach-mmp/mfp-pxa910.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MFP_PXA910_H
-#define __ASM_MACH_MFP_PXA910_H
-
-#include "mfp.h"
-
-#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
-#define MFP_DRIVE_SLOW		(0x2 << 13)
-#define MFP_DRIVE_MEDIUM	(0x4 << 13)
-#define MFP_DRIVE_FAST		(0x6 << 13)
-
-/* UART2 */
-#define GPIO47_UART2_RXD	MFP_CFG(GPIO47, AF6)
-#define GPIO48_UART2_TXD	MFP_CFG(GPIO48, AF6)
-
-/* UART3 */
-#define GPIO31_UART3_RXD	MFP_CFG(GPIO31, AF4)
-#define GPIO32_UART3_TXD	MFP_CFG(GPIO32, AF4)
-
-/*IRDA*/
-#define GPIO51_IRDA_SHDN	MFP_CFG(GPIO51, AF0)
-
-/* SMC */
-#define SM_nCS0_nCS0		MFP_CFG(SM_nCS0, AF0)
-#define SM_ADV_SM_ADV		MFP_CFG(SM_ADV, AF0)
-#define SM_SCLK_SM_SCLK		MFP_CFG(SM_SCLK, AF0)
-#define SM_BE0_SM_BE0		MFP_CFG(SM_BE0, AF1)
-#define SM_BE1_SM_BE1		MFP_CFG(SM_BE1, AF1)
-
-/* I2C */
-#define GPIO53_CI2C_SCL		MFP_CFG(GPIO53, AF2)
-#define GPIO54_CI2C_SDA		MFP_CFG(GPIO54, AF2)
-
-/* SSP1 (I2S) */
-#define GPIO24_SSP1_SDATA_IN	MFP_CFG_DRV(GPIO24, AF1, MEDIUM)
-#define GPIO21_SSP1_BITCLK	MFP_CFG_DRV(GPIO21, AF1, MEDIUM)
-#define GPIO20_SSP1_SYSCLK	MFP_CFG_DRV(GPIO20, AF1, MEDIUM)
-#define GPIO22_SSP1_SYNC	MFP_CFG_DRV(GPIO22, AF1, MEDIUM)
-#define GPIO23_SSP1_DATA_OUT	MFP_CFG_DRV(GPIO23, AF1, MEDIUM)
-#define GPIO124_MN_CLK_OUT	MFP_CFG_DRV(GPIO124, AF1, MEDIUM)
-#define GPIO123_CLK_REQ		MFP_CFG_DRV(GPIO123, AF0, MEDIUM)
-
-/* DFI */
-#define DF_IO0_ND_IO0		MFP_CFG(DF_IO0, AF0)
-#define DF_IO1_ND_IO1		MFP_CFG(DF_IO1, AF0)
-#define DF_IO2_ND_IO2		MFP_CFG(DF_IO2, AF0)
-#define DF_IO3_ND_IO3		MFP_CFG(DF_IO3, AF0)
-#define DF_IO4_ND_IO4		MFP_CFG(DF_IO4, AF0)
-#define DF_IO5_ND_IO5		MFP_CFG(DF_IO5, AF0)
-#define DF_IO6_ND_IO6		MFP_CFG(DF_IO6, AF0)
-#define DF_IO7_ND_IO7		MFP_CFG(DF_IO7, AF0)
-#define DF_IO8_ND_IO8		MFP_CFG(DF_IO8, AF0)
-#define DF_IO9_ND_IO9		MFP_CFG(DF_IO9, AF0)
-#define DF_IO10_ND_IO10		MFP_CFG(DF_IO10, AF0)
-#define DF_IO11_ND_IO11		MFP_CFG(DF_IO11, AF0)
-#define DF_IO12_ND_IO12		MFP_CFG(DF_IO12, AF0)
-#define DF_IO13_ND_IO13		MFP_CFG(DF_IO13, AF0)
-#define DF_IO14_ND_IO14		MFP_CFG(DF_IO14, AF0)
-#define DF_IO15_ND_IO15		MFP_CFG(DF_IO15, AF0)
-#define DF_nCS0_SM_nCS2_nCS0	MFP_CFG(DF_nCS0_SM_nCS2, AF0)
-#define DF_ALE_SM_WEn_ND_ALE	MFP_CFG(DF_ALE_SM_WEn, AF1)
-#define DF_CLE_SM_OEn_ND_CLE	MFP_CFG(DF_CLE_SM_OEn, AF0)
-#define DF_WEn_DF_WEn		MFP_CFG(DF_WEn, AF1)
-#define DF_REn_DF_REn		MFP_CFG(DF_REn, AF1)
-#define DF_RDY0_DF_RDY0		MFP_CFG(DF_RDY0, AF0)
-
-/*keypad*/
-#define GPIO00_KP_MKIN0		MFP_CFG(GPIO0, AF1)
-#define GPIO01_KP_MKOUT0	MFP_CFG(GPIO1, AF1)
-#define GPIO02_KP_MKIN1		MFP_CFG(GPIO2, AF1)
-#define GPIO03_KP_MKOUT1	MFP_CFG(GPIO3, AF1)
-#define GPIO04_KP_MKIN2		MFP_CFG(GPIO4, AF1)
-#define GPIO05_KP_MKOUT2	MFP_CFG(GPIO5, AF1)
-#define GPIO06_KP_MKIN3		MFP_CFG(GPIO6, AF1)
-#define GPIO07_KP_MKOUT3	MFP_CFG(GPIO7, AF1)
-#define GPIO08_KP_MKIN4		MFP_CFG(GPIO8, AF1)
-#define GPIO09_KP_MKOUT4	MFP_CFG(GPIO9, AF1)
-#define GPIO10_KP_MKIN5		MFP_CFG(GPIO10, AF1)
-#define GPIO11_KP_MKOUT5	MFP_CFG(GPIO11, AF1)
-#define GPIO12_KP_MKIN6		MFP_CFG(GPIO12, AF1)
-#define GPIO13_KP_MKOUT6	MFP_CFG(GPIO13, AF1)
-#define GPIO14_KP_MKIN7		MFP_CFG(GPIO14, AF1)
-#define GPIO15_KP_MKOUT7	MFP_CFG(GPIO15, AF1)
-#define GPIO16_KP_DKIN0		MFP_CFG(GPIO16, AF1)
-#define GPIO17_KP_DKIN1		MFP_CFG(GPIO17, AF1)
-#define GPIO18_KP_DKIN2		MFP_CFG(GPIO18, AF1)
-#define GPIO19_KP_DKIN3		MFP_CFG(GPIO19, AF1)
-
-/* LCD */
-#define GPIO81_LCD_FCLK		MFP_CFG(GPIO81, AF1)
-#define GPIO82_LCD_LCLK		MFP_CFG(GPIO82, AF1)
-#define GPIO83_LCD_PCLK		MFP_CFG(GPIO83, AF1)
-#define GPIO84_LCD_DENA		MFP_CFG(GPIO84, AF1)
-#define GPIO85_LCD_DD0		MFP_CFG(GPIO85, AF1)
-#define GPIO86_LCD_DD1		MFP_CFG(GPIO86, AF1)
-#define GPIO87_LCD_DD2		MFP_CFG(GPIO87, AF1)
-#define GPIO88_LCD_DD3		MFP_CFG(GPIO88, AF1)
-#define GPIO89_LCD_DD4		MFP_CFG(GPIO89, AF1)
-#define GPIO90_LCD_DD5		MFP_CFG(GPIO90, AF1)
-#define GPIO91_LCD_DD6		MFP_CFG(GPIO91, AF1)
-#define GPIO92_LCD_DD7		MFP_CFG(GPIO92, AF1)
-#define GPIO93_LCD_DD8		MFP_CFG(GPIO93, AF1)
-#define GPIO94_LCD_DD9		MFP_CFG(GPIO94, AF1)
-#define GPIO95_LCD_DD10		MFP_CFG(GPIO95, AF1)
-#define GPIO96_LCD_DD11		MFP_CFG(GPIO96, AF1)
-#define GPIO97_LCD_DD12		MFP_CFG(GPIO97, AF1)
-#define GPIO98_LCD_DD13		MFP_CFG(GPIO98, AF1)
-#define GPIO100_LCD_DD14	MFP_CFG(GPIO100, AF1)
-#define GPIO101_LCD_DD15	MFP_CFG(GPIO101, AF1)
-#define GPIO102_LCD_DD16	MFP_CFG(GPIO102, AF1)
-#define GPIO103_LCD_DD17	MFP_CFG(GPIO103, AF1)
-#define GPIO104_LCD_DD18	MFP_CFG(GPIO104, AF1)
-#define GPIO105_LCD_DD19	MFP_CFG(GPIO105, AF1)
-#define GPIO106_LCD_DD20	MFP_CFG(GPIO106, AF1)
-#define GPIO107_LCD_DD21	MFP_CFG(GPIO107, AF1)
-#define GPIO108_LCD_DD22	MFP_CFG(GPIO108, AF1)
-#define GPIO109_LCD_DD23	MFP_CFG(GPIO109, AF1)
-
-#define GPIO104_LCD_SPIDOUT	MFP_CFG(GPIO104, AF3)
-#define GPIO105_LCD_SPIDIN	MFP_CFG(GPIO105, AF3)
-#define GPIO107_LCD_CS1 	MFP_CFG(GPIO107, AF3)
-#define GPIO108_LCD_DCLK	MFP_CFG(GPIO108, AF3)
-
-#define GPIO106_LCD_RESET	MFP_CFG(GPIO106, AF0)
-
-/*smart panel*/
-#define GPIO82_LCD_A0		MFP_CFG(GPIO82, AF0)
-#define GPIO83_LCD_WR		MFP_CFG(GPIO83, AF0)
-#define GPIO103_LCD_CS		MFP_CFG(GPIO103, AF0)
-
-/*1wire*/
-#define GPIO106_1WIRE		MFP_CFG(GPIO106, AF3)
-
-/*CCIC*/
-#define GPIO67_CCIC_IN7		MFP_CFG_DRV(GPIO67, AF1, MEDIUM)
-#define GPIO68_CCIC_IN6		MFP_CFG_DRV(GPIO68, AF1, MEDIUM)
-#define GPIO69_CCIC_IN5		MFP_CFG_DRV(GPIO69, AF1, MEDIUM)
-#define GPIO70_CCIC_IN4		MFP_CFG_DRV(GPIO70, AF1, MEDIUM)
-#define GPIO71_CCIC_IN3		MFP_CFG_DRV(GPIO71, AF1, MEDIUM)
-#define GPIO72_CCIC_IN2		MFP_CFG_DRV(GPIO72, AF1, MEDIUM)
-#define GPIO73_CCIC_IN1		MFP_CFG_DRV(GPIO73, AF1, MEDIUM)
-#define GPIO74_CCIC_IN0		MFP_CFG_DRV(GPIO74, AF1, MEDIUM)
-#define GPIO75_CAM_HSYNC	MFP_CFG_DRV(GPIO75, AF1, MEDIUM)
-#define GPIO76_CAM_VSYNC	MFP_CFG_DRV(GPIO76, AF1, MEDIUM)
-#define GPIO77_CAM_MCLK		MFP_CFG_DRV(GPIO77, AF1, MEDIUM)
-#define GPIO78_CAM_PCLK		MFP_CFG_DRV(GPIO78, AF1, MEDIUM)
-
-/* MMC1 */
-#define MMC1_DAT7_MMC1_DAT7	MFP_CFG_DRV(MMC1_DAT7, AF0, MEDIUM)
-#define MMC1_DAT6_MMC1_DAT6	MFP_CFG_DRV(MMC1_DAT6, AF0, MEDIUM)
-#define MMC1_DAT5_MMC1_DAT5	MFP_CFG_DRV(MMC1_DAT5, AF0, MEDIUM)
-#define MMC1_DAT4_MMC1_DAT4	MFP_CFG_DRV(MMC1_DAT4, AF0, MEDIUM)
-#define MMC1_DAT3_MMC1_DAT3	MFP_CFG_DRV(MMC1_DAT3, AF0, MEDIUM)
-#define MMC1_DAT2_MMC1_DAT2	MFP_CFG_DRV(MMC1_DAT2, AF0, MEDIUM)
-#define MMC1_DAT1_MMC1_DAT1	MFP_CFG_DRV(MMC1_DAT1, AF0, MEDIUM)
-#define MMC1_DAT0_MMC1_DAT0	MFP_CFG_DRV(MMC1_DAT0, AF0, MEDIUM)
-#define MMC1_CMD_MMC1_CMD	MFP_CFG_DRV(MMC1_CMD, AF0, MEDIUM)
-#define MMC1_CLK_MMC1_CLK	MFP_CFG_DRV(MMC1_CLK, AF0, MEDIUM)
-#define MMC1_CD_MMC1_CD		MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM)
-#define MMC1_WP_MMC1_WP		MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
-
-/* PWM */
-#define GPIO27_PWM3_AF2		MFP_CFG(GPIO27, AF2)
-#define GPIO51_PWM2_OUT		MFP_CFG(GPIO51, AF2)
-#define GPIO117_PWM1_OUT	MFP_CFG(GPIO117, AF2)
-#define GPIO118_PWM2_OUT	MFP_CFG(GPIO118, AF2)
-#define GPIO119_PWM3_OUT	MFP_CFG(GPIO119, AF2)
-#define GPIO120_PWM4_OUT	MFP_CFG(GPIO120, AF2)
-
-#endif /* __ASM_MACH MFP_PXA910_H */
diff --git a/arch/arm/mach-mmp/mfp.h b/arch/arm/mach-mmp/mfp.h
deleted file mode 100644
index 6f3057987756..000000000000
--- a/arch/arm/mach-mmp/mfp.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MFP_H
-#define __ASM_MACH_MFP_H
-
-#include <linux/soc/pxa/mfp.h>
-
-/*
- * NOTE: the MFPR register bit definitions on PXA168 processor lines are a
- * bit different from those on PXA3xx.  Bit [7:10] are now reserved, which
- * were SLEEP_OE_N, SLEEP_DATA, SLEEP_SEL and the LSB of DRIVE bits.
- *
- * To cope with this difference and re-use the pxa3xx mfp code as much as
- * possible, we make the following compromise:
- *
- * 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
- * 2. DRIVE strength definitions redefined to include the reserved bit
- *    - the reserved bit differs between pxa168 and pxa910, and the
- *      MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h
- * 3. Override MFP_CFG() and MFP_CFG_DRV()
- * 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
- */
-
-#undef MFP_CFG
-#undef MFP_CFG_DRV
-#undef MFP_CFG_LPM
-#undef MFP_CFG_X
-#undef MFP_CFG_DEFAULT
-
-#define MFP_CFG(pin, af)		\
-	(MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM)
-
-#define MFP_CFG_DRV(pin, af, drv)	\
-	(MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv)
-
-#endif /* __ASM_MACH_MFP_H */
diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c
index 3f43c0867dca..8479996a8f2e 100644
--- a/arch/arm/mach-mmp/mmp-dt.c
+++ b/arch/arm/mach-mmp/mmp-dt.c
@@ -6,12 +6,9 @@
  *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
  */
 
-#include <linux/irqchip.h>
-#include <linux/of_platform.h>
 #include <linux/of_clk.h>
 #include <linux/clocksource.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
 #include <asm/hardware/cache-tauros2.h>
 
 #include "common.h"
diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c
index 34a5fe4b3949..e5ddc327651b 100644
--- a/arch/arm/mach-mmp/mmp2-dt.c
+++ b/arch/arm/mach-mmp/mmp2-dt.c
@@ -6,13 +6,9 @@
  *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
  */
 
-#include <linux/io.h>
-#include <linux/irqchip.h>
-#include <linux/of_platform.h>
 #include <linux/of_clk.h>
 #include <linux/clocksource.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
 #include <asm/hardware/cache-tauros2.h>
 
 #include "common.h"
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
deleted file mode 100644
index bbc4c2274de3..000000000000
--- a/arch/arm/mach-mmp/mmp2.c
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-mmp/mmp2.c
- *
- * code name MMP2
- *
- * Copyright (C) 2009 Marvell International Ltd.
- */
-#include <linux/clk/mmp.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqchip/mmp.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware/cache-tauros2.h>
-
-#include <asm/mach/time.h>
-#include "addr-map.h"
-#include "regs-apbc.h"
-#include <linux/soc/mmp/cputype.h>
-#include "irqs.h"
-#include "mfp.h"
-#include "devices.h"
-#include "mmp2.h"
-#include "pm-mmp2.h"
-
-#include "common.h"
-
-#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
-
-static struct mfp_addr_map mmp2_addr_map[] __initdata = {
-
-	MFP_ADDR_X(GPIO0, GPIO58, 0x54),
-	MFP_ADDR_X(GPIO59, GPIO73, 0x280),
-	MFP_ADDR_X(GPIO74, GPIO101, 0x170),
-
-	MFP_ADDR(GPIO102, 0x0),
-	MFP_ADDR(GPIO103, 0x4),
-	MFP_ADDR(GPIO104, 0x1fc),
-	MFP_ADDR(GPIO105, 0x1f8),
-	MFP_ADDR(GPIO106, 0x1f4),
-	MFP_ADDR(GPIO107, 0x1f0),
-	MFP_ADDR(GPIO108, 0x21c),
-	MFP_ADDR(GPIO109, 0x218),
-	MFP_ADDR(GPIO110, 0x214),
-	MFP_ADDR(GPIO111, 0x200),
-	MFP_ADDR(GPIO112, 0x244),
-	MFP_ADDR(GPIO113, 0x25c),
-	MFP_ADDR(GPIO114, 0x164),
-	MFP_ADDR_X(GPIO115, GPIO122, 0x260),
-
-	MFP_ADDR(GPIO123, 0x148),
-	MFP_ADDR_X(GPIO124, GPIO141, 0xc),
-
-	MFP_ADDR(GPIO142, 0x8),
-	MFP_ADDR_X(GPIO143, GPIO151, 0x220),
-	MFP_ADDR_X(GPIO152, GPIO153, 0x248),
-	MFP_ADDR_X(GPIO154, GPIO155, 0x254),
-	MFP_ADDR_X(GPIO156, GPIO159, 0x14c),
-
-	MFP_ADDR(GPIO160, 0x250),
-	MFP_ADDR(GPIO161, 0x210),
-	MFP_ADDR(GPIO162, 0x20c),
-	MFP_ADDR(GPIO163, 0x208),
-	MFP_ADDR(GPIO164, 0x204),
-	MFP_ADDR(GPIO165, 0x1ec),
-	MFP_ADDR(GPIO166, 0x1e8),
-	MFP_ADDR(GPIO167, 0x1e4),
-	MFP_ADDR(GPIO168, 0x1e0),
-
-	MFP_ADDR_X(TWSI1_SCL, TWSI1_SDA, 0x140),
-	MFP_ADDR_X(TWSI4_SCL, TWSI4_SDA, 0x2bc),
-
-	MFP_ADDR(PMIC_INT, 0x2c4),
-	MFP_ADDR(CLK_REQ, 0x160),
-
-	MFP_ADDR_END,
-};
-
-void mmp2_clear_pmic_int(void)
-{
-	void __iomem *mfpr_pmic;
-	unsigned long data;
-
-	mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4;
-	data = __raw_readl(mfpr_pmic);
-	__raw_writel(data | (1 << 6), mfpr_pmic);
-	__raw_writel(data, mfpr_pmic);
-}
-
-void __init mmp2_init_irq(void)
-{
-	mmp2_init_icu();
-#ifdef CONFIG_PM
-	icu_irq_chip.irq_set_wake = mmp2_set_wake;
-#endif
-}
-
-static int __init mmp2_init(void)
-{
-	if (cpu_is_mmp2()) {
-#ifdef CONFIG_CACHE_TAUROS2
-		tauros2_init(0);
-#endif
-		mfp_init_base(MFPR_VIRT_BASE);
-		mfp_init_addr(mmp2_addr_map);
-		mmp2_clk_init(APB_PHYS_BASE + 0x50000,
-			      AXI_PHYS_BASE + 0x82800,
-			      APB_PHYS_BASE + 0x15000);
-	}
-
-	return 0;
-}
-postcore_initcall(mmp2_init);
-
-#define APBC_TIMERS	APBC_REG(0x024)
-
-void __init mmp2_timer_init(void)
-{
-	unsigned long clk_rst;
-
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
-
-	/*
-	 * enable bus/functional clock, enable 6.5MHz (divider 4),
-	 * release reset
-	 */
-	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
-	__raw_writel(clk_rst, APBC_TIMERS);
-
-	mmp_timer_init(IRQ_MMP2_TIMER1, 6500000);
-}
-
-/* on-chip devices */
-MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
-MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
-MMP2_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4018000, 0x30, 22, 23);
-MMP2_DEVICE(uart4, "pxa2xx-uart", 3, UART4, 0xd4016000, 0x30, 18, 19);
-MMP2_DEVICE(twsi1, "pxa2xx-i2c", 0, TWSI1, 0xd4011000, 0x70);
-MMP2_DEVICE(twsi2, "pxa2xx-i2c", 1, TWSI2, 0xd4031000, 0x70);
-MMP2_DEVICE(twsi3, "pxa2xx-i2c", 2, TWSI3, 0xd4032000, 0x70);
-MMP2_DEVICE(twsi4, "pxa2xx-i2c", 3, TWSI4, 0xd4033000, 0x70);
-MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70);
-MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70);
-MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29);
-MMP2_DEVICE(sdh0, "sdhci-pxav3", 0, MMC, 0xd4280000, 0x120);
-MMP2_DEVICE(sdh1, "sdhci-pxav3", 1, MMC2, 0xd4280800, 0x120);
-MMP2_DEVICE(sdh2, "sdhci-pxav3", 2, MMC3, 0xd4281000, 0x120);
-MMP2_DEVICE(sdh3, "sdhci-pxav3", 3, MMC4, 0xd4281800, 0x120);
-MMP2_DEVICE(asram, "asram", -1, NONE, 0xe0000000, 0x4000);
-/* 0xd1000000 ~ 0xd101ffff is reserved for secure processor */
-MMP2_DEVICE(isram, "isram", -1, NONE, 0xd1020000, 0x18000);
-
-struct resource mmp2_resource_gpio[] = {
-	{
-		.start	= 0xd4019000,
-		.end	= 0xd4019fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_MMP2_GPIO,
-		.end	= IRQ_MMP2_GPIO,
-		.name	= "gpio_mux",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mmp2_device_gpio = {
-	.name		= "mmp2-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mmp2_resource_gpio),
-	.resource	= mmp2_resource_gpio,
-};
diff --git a/arch/arm/mach-mmp/mmp2.h b/arch/arm/mach-mmp/mmp2.h
deleted file mode 100644
index 7f80b90248fb..000000000000
--- a/arch/arm/mach-mmp/mmp2.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MMP2_H
-#define __ASM_MACH_MMP2_H
-
-#include <linux/platform_data/pxa_sdhci.h>
-
-extern void mmp2_timer_init(void);
-extern void __init mmp2_init_irq(void);
-extern void mmp2_clear_pmic_int(void);
-
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/platform_data/dma-mmp_tdma.h>
-#include <linux/irqchip/mmp.h>
-
-#include "devices.h"
-
-extern struct mmp_device_desc mmp2_device_uart1;
-extern struct mmp_device_desc mmp2_device_uart2;
-extern struct mmp_device_desc mmp2_device_uart3;
-extern struct mmp_device_desc mmp2_device_uart4;
-extern struct mmp_device_desc mmp2_device_twsi1;
-extern struct mmp_device_desc mmp2_device_twsi2;
-extern struct mmp_device_desc mmp2_device_twsi3;
-extern struct mmp_device_desc mmp2_device_twsi4;
-extern struct mmp_device_desc mmp2_device_twsi5;
-extern struct mmp_device_desc mmp2_device_twsi6;
-extern struct mmp_device_desc mmp2_device_sdh0;
-extern struct mmp_device_desc mmp2_device_sdh1;
-extern struct mmp_device_desc mmp2_device_sdh2;
-extern struct mmp_device_desc mmp2_device_sdh3;
-extern struct mmp_device_desc mmp2_device_asram;
-extern struct mmp_device_desc mmp2_device_isram;
-
-extern struct platform_device mmp2_device_gpio;
-
-static inline int mmp2_add_uart(int id)
-{
-	struct mmp_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &mmp2_device_uart1; break;
-	case 2: d = &mmp2_device_uart2; break;
-	case 3: d = &mmp2_device_uart3; break;
-	case 4: d = &mmp2_device_uart4; break;
-	default:
-		return -EINVAL;
-	}
-
-	return mmp_register_device(d, NULL, 0);
-}
-
-static inline int mmp2_add_twsi(int id, struct i2c_pxa_platform_data *data,
-				  struct i2c_board_info *info, unsigned size)
-{
-	struct mmp_device_desc *d = NULL;
-	int ret;
-
-	switch (id) {
-	case 1: d = &mmp2_device_twsi1; break;
-	case 2: d = &mmp2_device_twsi2; break;
-	case 3: d = &mmp2_device_twsi3; break;
-	case 4: d = &mmp2_device_twsi4; break;
-	case 5: d = &mmp2_device_twsi5; break;
-	case 6: d = &mmp2_device_twsi6; break;
-	default:
-		return -EINVAL;
-	}
-
-	ret = i2c_register_board_info(id - 1, info, size);
-	if (ret)
-		return ret;
-
-	return mmp_register_device(d, data, sizeof(*data));
-}
-
-static inline int mmp2_add_sdhost(int id, struct sdhci_pxa_platdata *data)
-{
-	struct mmp_device_desc *d = NULL;
-
-	switch (id) {
-	case 0: d = &mmp2_device_sdh0; break;
-	case 1: d = &mmp2_device_sdh1; break;
-	case 2: d = &mmp2_device_sdh2; break;
-	case 3: d = &mmp2_device_sdh3; break;
-	default:
-		return -EINVAL;
-	}
-
-	return mmp_register_device(d, data, sizeof(*data));
-}
-
-static inline int mmp2_add_asram(struct sram_platdata *data)
-{
-	return mmp_register_device(&mmp2_device_asram, data, sizeof(*data));
-}
-
-static inline int mmp2_add_isram(struct sram_platdata *data)
-{
-	return mmp_register_device(&mmp2_device_isram, data, sizeof(*data));
-}
-
-#endif /* __ASM_MACH_MMP2_H */
-
diff --git a/arch/arm/mach-mmp/mmp3.c b/arch/arm/mach-mmp/mmp3.c
index b0e86964f302..073a4ee219cb 100644
--- a/arch/arm/mach-mmp/mmp3.c
+++ b/arch/arm/mach-mmp/mmp3.c
@@ -5,10 +5,6 @@
  *  Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk>
  */
 
-#include <linux/io.h>
-#include <linux/irqchip.h>
-#include <linux/of_platform.h>
-#include <linux/clk-provider.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/cache-l2x0.h>
 
diff --git a/arch/arm/mach-mmp/pm-mmp2.c b/arch/arm/mach-mmp/pm-mmp2.c
deleted file mode 100644
index 7a6f74c32d42..000000000000
--- a/arch/arm/mach-mmp/pm-mmp2.c
+++ /dev/null
@@ -1,248 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * MMP2 Power Management Routines
- *
- * (C) Copyright 2012 Marvell International Ltd.
- * All Rights Reserved
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/suspend.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <asm/mach-types.h>
-
-#include <linux/soc/mmp/cputype.h>
-#include "addr-map.h"
-#include "pm-mmp2.h"
-#include "regs-icu.h"
-#include "irqs.h"
-
-int mmp2_set_wake(struct irq_data *d, unsigned int on)
-{
-	unsigned long data = 0;
-	int irq = d->irq;
-
-	/* enable wakeup sources */
-	switch (irq) {
-	case IRQ_MMP2_RTC:
-	case IRQ_MMP2_RTC_ALARM:
-		data = MPMU_WUCRM_PJ_WAKEUP(4) | MPMU_WUCRM_PJ_RTC_ALARM;
-		break;
-	case IRQ_MMP2_PMIC:
-		data = MPMU_WUCRM_PJ_WAKEUP(7);
-		break;
-	case IRQ_MMP2_MMC2:
-		/* mmc use WAKEUP2, same as GPIO wakeup source */
-		data = MPMU_WUCRM_PJ_WAKEUP(2);
-		break;
-	}
-	if (on) {
-		if (data) {
-			data |= __raw_readl(MPMU_WUCRM_PJ);
-			__raw_writel(data, MPMU_WUCRM_PJ);
-		}
-	} else {
-		if (data) {
-			data = ~data & __raw_readl(MPMU_WUCRM_PJ);
-			__raw_writel(data, MPMU_WUCRM_PJ);
-		}
-	}
-	return 0;
-}
-
-static void pm_scu_clk_disable(void)
-{
-	unsigned int val;
-
-	/* close AXI fabric clock gate */
-	__raw_writel(0x0, CIU_REG(0x64));
-	__raw_writel(0x0, CIU_REG(0x68));
-
-	/* close MCB master clock gate */
-	val = __raw_readl(CIU_REG(0x1c));
-	val |= 0xf0;
-	__raw_writel(val, CIU_REG(0x1c));
-
-	return ;
-}
-
-static void pm_scu_clk_enable(void)
-{
-	unsigned int val;
-
-	/* open AXI fabric clock gate */
-	__raw_writel(0x03003003, CIU_REG(0x64));
-	__raw_writel(0x00303030, CIU_REG(0x68));
-
-	/* open MCB master clock gate */
-	val = __raw_readl(CIU_REG(0x1c));
-	val &= ~(0xf0);
-	__raw_writel(val, CIU_REG(0x1c));
-
-	return ;
-}
-
-static void pm_mpmu_clk_disable(void)
-{
-	/*
-	 * disable clocks in MPMU_CGR_PJ register
-	 * except clock for APMU_PLL1, APMU_PLL1_2 and AP_26M
-	 */
-	__raw_writel(0x0000a010, MPMU_CGR_PJ);
-}
-
-static void pm_mpmu_clk_enable(void)
-{
-	unsigned int val;
-
-	__raw_writel(0xdffefffe, MPMU_CGR_PJ);
-	val = __raw_readl(MPMU_PLL2_CTRL1);
-	val |= (1 << 29);
-	__raw_writel(val, MPMU_PLL2_CTRL1);
-
-	return ;
-}
-
-void mmp2_pm_enter_lowpower_mode(int state)
-{
-	uint32_t idle_cfg, apcr;
-
-	idle_cfg = __raw_readl(APMU_PJ_IDLE_CFG);
-	apcr = __raw_readl(MPMU_PCR_PJ);
-	apcr &= ~(MPMU_PCR_PJ_SLPEN | MPMU_PCR_PJ_DDRCORSD | MPMU_PCR_PJ_APBSD
-		 | MPMU_PCR_PJ_AXISD | MPMU_PCR_PJ_VCTCXOSD | (1 << 13));
-	idle_cfg &= ~APMU_PJ_IDLE_CFG_PJ_IDLE;
-
-	switch (state) {
-	case POWER_MODE_SYS_SLEEP:
-		apcr |= MPMU_PCR_PJ_SLPEN;		/* set the SLPEN bit */
-		apcr |= MPMU_PCR_PJ_VCTCXOSD;		/* set VCTCXOSD */
-		fallthrough;
-	case POWER_MODE_CHIP_SLEEP:
-		apcr |= MPMU_PCR_PJ_SLPEN;
-		fallthrough;
-	case POWER_MODE_APPS_SLEEP:
-		apcr |= MPMU_PCR_PJ_APBSD;		/* set APBSD */
-		fallthrough;
-	case POWER_MODE_APPS_IDLE:
-		apcr |= MPMU_PCR_PJ_AXISD;		/* set AXISDD bit */
-		apcr |= MPMU_PCR_PJ_DDRCORSD;		/* set DDRCORSD bit */
-		idle_cfg |= APMU_PJ_IDLE_CFG_PJ_PWRDWN;	/* PJ power down */
-		apcr |= MPMU_PCR_PJ_SPSD;
-		fallthrough;
-	case POWER_MODE_CORE_EXTIDLE:
-		idle_cfg |= APMU_PJ_IDLE_CFG_PJ_IDLE;	/* set the IDLE bit */
-		idle_cfg &= ~APMU_PJ_IDLE_CFG_ISO_MODE_CNTRL_MASK;
-		idle_cfg |= APMU_PJ_IDLE_CFG_PWR_SW(3)
-			| APMU_PJ_IDLE_CFG_L2_PWR_SW;
-		break;
-	case POWER_MODE_CORE_INTIDLE:
-		apcr &= ~MPMU_PCR_PJ_SPSD;
-		break;
-	}
-
-	/* set reserve bits */
-	apcr |= (1 << 30) | (1 << 25);
-
-	/* finally write the registers back */
-	__raw_writel(idle_cfg, APMU_PJ_IDLE_CFG);
-	__raw_writel(apcr, MPMU_PCR_PJ);	/* 0xfe086000 */
-}
-
-static int mmp2_pm_enter(suspend_state_t state)
-{
-	int temp;
-
-	temp = __raw_readl(MMP2_ICU_INT4_MASK);
-	if (temp & (1 << 1)) {
-		printk(KERN_ERR "%s: PMIC interrupt is handling\n", __func__);
-		return -EAGAIN;
-	}
-
-	temp = __raw_readl(APMU_SRAM_PWR_DWN);
-	temp |= ((1 << 19) | (1 << 18));
-	__raw_writel(temp, APMU_SRAM_PWR_DWN);
-	pm_mpmu_clk_disable();
-	pm_scu_clk_disable();
-
-	printk(KERN_INFO "%s: before suspend\n", __func__);
-	cpu_do_idle();
-	printk(KERN_INFO "%s: after suspend\n", __func__);
-
-	pm_mpmu_clk_enable();		/* enable clocks in MPMU */
-	pm_scu_clk_enable();		/* enable clocks in SCU */
-
-	return 0;
-}
-
-/*
- * Called after processes are frozen, but before we shut down devices.
- */
-static int mmp2_pm_prepare(void)
-{
-	mmp2_pm_enter_lowpower_mode(POWER_MODE_SYS_SLEEP);
-
-	return 0;
-}
-
-/*
- * Called after devices are re-setup, but before processes are thawed.
- */
-static void mmp2_pm_finish(void)
-{
-	mmp2_pm_enter_lowpower_mode(POWER_MODE_CORE_INTIDLE);
-}
-
-static int mmp2_pm_valid(suspend_state_t state)
-{
-	return ((state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM));
-}
-
-/*
- * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
- */
-static const struct platform_suspend_ops mmp2_pm_ops = {
-	.valid		= mmp2_pm_valid,
-	.prepare	= mmp2_pm_prepare,
-	.enter		= mmp2_pm_enter,
-	.finish		= mmp2_pm_finish,
-};
-
-static int __init mmp2_pm_init(void)
-{
-	uint32_t apcr;
-
-	if (!cpu_is_mmp2())
-		return -EIO;
-
-	suspend_set_ops(&mmp2_pm_ops);
-
-	/*
-	 * Set bit 0, Slow clock Select 32K clock input instead of VCXO
-	 * VCXO is chosen by default, which would be disabled in suspend
-	 */
-	__raw_writel(0x5, MPMU_SCCR);
-
-	/*
-	 * Clear bit 23 of CIU_CPU_CONF
-	 * direct PJ4 to DDR access through Memory Controller slow queue
-	 * fast queue has issue and cause lcd will flick
-	 */
-	__raw_writel(__raw_readl(CIU_REG(0x8)) & ~(0x1 << 23), CIU_REG(0x8));
-
-	/* Clear default low power control bit */
-	apcr = __raw_readl(MPMU_PCR_PJ);
-	apcr &= ~(MPMU_PCR_PJ_SLPEN | MPMU_PCR_PJ_DDRCORSD
-			| MPMU_PCR_PJ_APBSD | MPMU_PCR_PJ_AXISD | 1 << 13);
-	__raw_writel(apcr, MPMU_PCR_PJ);
-
-	return 0;
-}
-
-late_initcall(mmp2_pm_init);
diff --git a/arch/arm/mach-mmp/pm-mmp2.h b/arch/arm/mach-mmp/pm-mmp2.h
deleted file mode 100644
index 70299a9450d3..000000000000
--- a/arch/arm/mach-mmp/pm-mmp2.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * MMP2 Power Management Routines
- *
- * (C) Copyright 2010 Marvell International Ltd.
- * All Rights Reserved
- */
-
-#ifndef __MMP2_PM_H__
-#define __MMP2_PM_H__
-
-#include "addr-map.h"
-
-#define APMU_PJ_IDLE_CFG			APMU_REG(0x018)
-#define APMU_PJ_IDLE_CFG_PJ_IDLE		(1 << 1)
-#define APMU_PJ_IDLE_CFG_PJ_PWRDWN		(1 << 5)
-#define APMU_PJ_IDLE_CFG_PWR_SW(x)		((x) << 16)
-#define APMU_PJ_IDLE_CFG_L2_PWR_SW		(1 << 19)
-#define APMU_PJ_IDLE_CFG_ISO_MODE_CNTRL_MASK	(3 << 28)
-
-#define APMU_SRAM_PWR_DWN			APMU_REG(0x08c)
-
-#define MPMU_SCCR				MPMU_REG(0x038)
-#define MPMU_PCR_PJ				MPMU_REG(0x1000)
-#define MPMU_PCR_PJ_AXISD			(1 << 31)
-#define MPMU_PCR_PJ_SLPEN			(1 << 29)
-#define MPMU_PCR_PJ_SPSD			(1 << 28)
-#define MPMU_PCR_PJ_DDRCORSD			(1 << 27)
-#define MPMU_PCR_PJ_APBSD			(1 << 26)
-#define MPMU_PCR_PJ_INTCLR			(1 << 24)
-#define MPMU_PCR_PJ_SLPWP0			(1 << 23)
-#define MPMU_PCR_PJ_SLPWP1			(1 << 22)
-#define MPMU_PCR_PJ_SLPWP2			(1 << 21)
-#define MPMU_PCR_PJ_SLPWP3			(1 << 20)
-#define MPMU_PCR_PJ_VCTCXOSD			(1 << 19)
-#define MPMU_PCR_PJ_SLPWP4			(1 << 18)
-#define MPMU_PCR_PJ_SLPWP5			(1 << 17)
-#define MPMU_PCR_PJ_SLPWP6			(1 << 16)
-#define MPMU_PCR_PJ_SLPWP7			(1 << 15)
-
-#define MPMU_PLL2_CTRL1				MPMU_REG(0x0414)
-#define MPMU_CGR_PJ				MPMU_REG(0x1024)
-#define MPMU_WUCRM_PJ				MPMU_REG(0x104c)
-#define MPMU_WUCRM_PJ_WAKEUP(x)			(1 << (x))
-#define MPMU_WUCRM_PJ_RTC_ALARM			(1 << 17)
-
-enum {
-	POWER_MODE_ACTIVE = 0,
-	POWER_MODE_CORE_INTIDLE,
-	POWER_MODE_CORE_EXTIDLE,
-	POWER_MODE_APPS_IDLE,
-	POWER_MODE_APPS_SLEEP,
-	POWER_MODE_CHIP_SLEEP,
-	POWER_MODE_SYS_SLEEP,
-};
-
-extern void mmp2_pm_enter_lowpower_mode(int state);
-extern int mmp2_set_wake(struct irq_data *d, unsigned int on);
-#endif
diff --git a/arch/arm/mach-mmp/pm-pxa910.c b/arch/arm/mach-mmp/pm-pxa910.c
deleted file mode 100644
index 1d71d73c1862..000000000000
--- a/arch/arm/mach-mmp/pm-pxa910.c
+++ /dev/null
@@ -1,272 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * PXA910 Power Management Routines
- *
- * (C) Copyright 2009 Marvell International Ltd.
- * All Rights Reserved
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/suspend.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <asm/mach-types.h>
-#include <asm/outercache.h>
-
-#include <linux/soc/mmp/cputype.h>
-#include "addr-map.h"
-#include "pm-pxa910.h"
-#include "regs-icu.h"
-#include "irqs.h"
-
-int pxa910_set_wake(struct irq_data *data, unsigned int on)
-{
-	uint32_t awucrm = 0, apcr = 0;
-	int irq = data->irq;
-
-	/* setting wakeup sources */
-	switch (irq) {
-	/* wakeup line 2 */
-	case IRQ_PXA910_AP_GPIO:
-		awucrm = MPMU_AWUCRM_WAKEUP(2);
-		apcr |= MPMU_APCR_SLPWP2;
-		break;
-	/* wakeup line 3 */
-	case IRQ_PXA910_KEYPAD:
-		awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_KEYPRESS;
-		apcr |= MPMU_APCR_SLPWP3;
-		break;
-	case IRQ_PXA910_ROTARY:
-		awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_NEWROTARY;
-		apcr |= MPMU_APCR_SLPWP3;
-		break;
-	case IRQ_PXA910_TRACKBALL:
-		awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_TRACKBALL;
-		apcr |= MPMU_APCR_SLPWP3;
-		break;
-	/* wakeup line 4 */
-	case IRQ_PXA910_AP1_TIMER1:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_1;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	case IRQ_PXA910_AP1_TIMER2:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_2;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	case IRQ_PXA910_AP1_TIMER3:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_3;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	case IRQ_PXA910_AP2_TIMER1:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_1;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	case IRQ_PXA910_AP2_TIMER2:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_2;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	case IRQ_PXA910_AP2_TIMER3:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_3;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	case IRQ_PXA910_RTC_ALARM:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_RTC_ALARM;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	/* wakeup line 5 */
-	case IRQ_PXA910_USB1:
-	case IRQ_PXA910_USB2:
-		awucrm = MPMU_AWUCRM_WAKEUP(5);
-		apcr |= MPMU_APCR_SLPWP5;
-		break;
-	/* wakeup line 6 */
-	case IRQ_PXA910_MMC:
-		awucrm = MPMU_AWUCRM_WAKEUP(6)
-			| MPMU_AWUCRM_SDH1
-			| MPMU_AWUCRM_SDH2;
-		apcr |= MPMU_APCR_SLPWP6;
-		break;
-	/* wakeup line 7 */
-	case IRQ_PXA910_PMIC_INT:
-		awucrm = MPMU_AWUCRM_WAKEUP(7);
-		apcr |= MPMU_APCR_SLPWP7;
-		break;
-	default:
-		if (irq >= IRQ_GPIO_START && irq < IRQ_BOARD_START) {
-			awucrm = MPMU_AWUCRM_WAKEUP(2);
-			apcr |= MPMU_APCR_SLPWP2;
-		} else {
-			/* FIXME: This should return a proper error code ! */
-			printk(KERN_ERR "Error: no defined wake up source irq: %d\n",
-				irq);
-		}
-	}
-
-	if (on) {
-		if (awucrm) {
-			awucrm |= __raw_readl(MPMU_AWUCRM);
-			__raw_writel(awucrm, MPMU_AWUCRM);
-		}
-		if (apcr) {
-			apcr = ~apcr & __raw_readl(MPMU_APCR);
-			__raw_writel(apcr, MPMU_APCR);
-		}
-	} else {
-		if (awucrm) {
-			awucrm = ~awucrm & __raw_readl(MPMU_AWUCRM);
-			__raw_writel(awucrm, MPMU_AWUCRM);
-		}
-		if (apcr) {
-			apcr |= __raw_readl(MPMU_APCR);
-			__raw_writel(apcr, MPMU_APCR);
-		}
-	}
-	return 0;
-}
-
-void pxa910_pm_enter_lowpower_mode(int state)
-{
-	uint32_t idle_cfg, apcr;
-
-	idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
-	apcr = __raw_readl(MPMU_APCR);
-
-	apcr &= ~(MPMU_APCR_DDRCORSD | MPMU_APCR_APBSD | MPMU_APCR_AXISD
-		| MPMU_APCR_VCTCXOSD | MPMU_APCR_STBYEN);
-	idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_IDLE
-		| APMU_MOH_IDLE_CFG_MOH_PWRDWN);
-
-	switch (state) {
-	case POWER_MODE_UDR:
-		/* only shutdown APB in UDR */
-		apcr |= MPMU_APCR_STBYEN | MPMU_APCR_APBSD;
-		fallthrough;
-	case POWER_MODE_SYS_SLEEP:
-		apcr |= MPMU_APCR_SLPEN;		/* set the SLPEN bit */
-		apcr |= MPMU_APCR_VCTCXOSD;		/* set VCTCXOSD */
-		fallthrough;
-	case POWER_MODE_APPS_SLEEP:
-		apcr |= MPMU_APCR_DDRCORSD;		/* set DDRCORSD */
-		fallthrough;
-	case POWER_MODE_APPS_IDLE:
-		apcr |= MPMU_APCR_AXISD;		/* set AXISDD bit */
-		fallthrough;
-	case POWER_MODE_CORE_EXTIDLE:
-		idle_cfg |= APMU_MOH_IDLE_CFG_MOH_IDLE;
-		idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN;
-		idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWR_SW(3)
-			| APMU_MOH_IDLE_CFG_MOH_L2_PWR_SW(3);
-		fallthrough;
-	case POWER_MODE_CORE_INTIDLE:
-		break;
-	}
-
-	/* program the memory controller hardware sleep type and auto wakeup */
-	idle_cfg |= APMU_MOH_IDLE_CFG_MOH_DIS_MC_SW_REQ;
-	idle_cfg |= APMU_MOH_IDLE_CFG_MOH_MC_WAKE_EN;
-	__raw_writel(0x0, APMU_MC_HW_SLP_TYPE);		/* auto refresh */
-
-	/* set DSPSD, DTCMSD, BBSD, MSASLPEN */
-	apcr |= MPMU_APCR_DSPSD | MPMU_APCR_DTCMSD | MPMU_APCR_BBSD
-		| MPMU_APCR_MSASLPEN;
-
-	/*always set SLEPEN bit mainly for MSA*/
-	apcr |= MPMU_APCR_SLPEN;
-
-	/* finally write the registers back */
-	__raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
-	__raw_writel(apcr, MPMU_APCR);
-
-}
-
-static int pxa910_pm_enter(suspend_state_t state)
-{
-	unsigned int idle_cfg, reg = 0;
-
-	/*pmic thread not completed,exit;otherwise system can't be waked up*/
-	reg = __raw_readl(ICU_INT_CONF(IRQ_PXA910_PMIC_INT));
-	if ((reg & 0x3) == 0)
-		return -EAGAIN;
-
-	idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
-	idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN
-		| APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN;
-	__raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
-
-	/* disable L2 */
-	outer_disable();
-	/* wait for l2 idle */
-	while (!(readl(CIU_REG(0x8)) & (1 << 16)))
-		udelay(1);
-
-	cpu_do_idle();
-
-	/* enable L2 */
-	outer_resume();
-	/* wait for l2 idle */
-	while (!(readl(CIU_REG(0x8)) & (1 << 16)))
-		udelay(1);
-
-	idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
-	idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_PWRDWN
-		| APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN);
-	__raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
-
-	return 0;
-}
-
-/*
- * Called after processes are frozen, but before we shut down devices.
- */
-static int pxa910_pm_prepare(void)
-{
-	pxa910_pm_enter_lowpower_mode(POWER_MODE_UDR);
-	return 0;
-}
-
-/*
- * Called after devices are re-setup, but before processes are thawed.
- */
-static void pxa910_pm_finish(void)
-{
-	pxa910_pm_enter_lowpower_mode(POWER_MODE_CORE_INTIDLE);
-}
-
-static int pxa910_pm_valid(suspend_state_t state)
-{
-	return ((state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM));
-}
-
-static const struct platform_suspend_ops pxa910_pm_ops = {
-	.valid		= pxa910_pm_valid,
-	.prepare	= pxa910_pm_prepare,
-	.enter		= pxa910_pm_enter,
-	.finish		= pxa910_pm_finish,
-};
-
-static int __init pxa910_pm_init(void)
-{
-	uint32_t awucrm = 0;
-
-	if (!cpu_is_pxa910())
-		return -EIO;
-
-	suspend_set_ops(&pxa910_pm_ops);
-
-	/* Set the following bits for MMP3 playback with VCTXO on */
-	__raw_writel(__raw_readl(APMU_SQU_CLK_GATE_CTRL) | (1 << 30),
-		APMU_SQU_CLK_GATE_CTRL);
-	__raw_writel(__raw_readl(MPMU_FCCR) | (1 << 28), MPMU_FCCR);
-
-	awucrm |= MPMU_AWUCRM_AP_ASYNC_INT | MPMU_AWUCRM_AP_FULL_IDLE;
-	__raw_writel(awucrm, MPMU_AWUCRM);
-
-	return 0;
-}
-
-late_initcall(pxa910_pm_init);
diff --git a/arch/arm/mach-mmp/pm-pxa910.h b/arch/arm/mach-mmp/pm-pxa910.h
deleted file mode 100644
index 8e6344adaf51..000000000000
--- a/arch/arm/mach-mmp/pm-pxa910.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * PXA910 Power Management Routines
- *
- * (C) Copyright 2009 Marvell International Ltd.
- * All Rights Reserved
- */
-
-#ifndef __PXA910_PM_H__
-#define __PXA910_PM_H__
-
-#define APMU_MOH_IDLE_CFG			APMU_REG(0x0018)
-#define APMU_MOH_IDLE_CFG_MOH_IDLE		(1 << 1)
-#define APMU_MOH_IDLE_CFG_MOH_PWRDWN		(1 << 5)
-#define APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN	(1 << 6)
-#define APMU_MOH_IDLE_CFG_MOH_PWR_SW(x)		(((x) & 0x3) << 16)
-#define APMU_MOH_IDLE_CFG_MOH_L2_PWR_SW(x)	(((x) & 0x3) << 18)
-#define APMU_MOH_IDLE_CFG_MOH_DIS_MC_SW_REQ	(1 << 21)
-#define APMU_MOH_IDLE_CFG_MOH_MC_WAKE_EN	(1 << 20)
-
-#define APMU_SQU_CLK_GATE_CTRL			APMU_REG(0x001c)
-#define APMU_MC_HW_SLP_TYPE			APMU_REG(0x00b0)
-
-#define MPMU_FCCR				MPMU_REG(0x0008)
-#define MPMU_APCR				MPMU_REG(0x1000)
-#define MPMU_APCR_AXISD				(1 << 31)
-#define MPMU_APCR_DSPSD				(1 << 30)
-#define MPMU_APCR_SLPEN				(1 << 29)
-#define MPMU_APCR_DTCMSD			(1 << 28)
-#define MPMU_APCR_DDRCORSD			(1 << 27)
-#define MPMU_APCR_APBSD				(1 << 26)
-#define MPMU_APCR_BBSD				(1 << 25)
-#define MPMU_APCR_SLPWP0			(1 << 23)
-#define MPMU_APCR_SLPWP1			(1 << 22)
-#define MPMU_APCR_SLPWP2			(1 << 21)
-#define MPMU_APCR_SLPWP3			(1 << 20)
-#define MPMU_APCR_VCTCXOSD			(1 << 19)
-#define MPMU_APCR_SLPWP4			(1 << 18)
-#define MPMU_APCR_SLPWP5			(1 << 17)
-#define MPMU_APCR_SLPWP6			(1 << 16)
-#define MPMU_APCR_SLPWP7			(1 << 15)
-#define MPMU_APCR_MSASLPEN			(1 << 14)
-#define MPMU_APCR_STBYEN			(1 << 13)
-
-#define MPMU_AWUCRM				MPMU_REG(0x104c)
-#define MPMU_AWUCRM_AP_ASYNC_INT		(1 << 25)
-#define MPMU_AWUCRM_AP_FULL_IDLE		(1 << 24)
-#define MPMU_AWUCRM_SDH1			(1 << 23)
-#define MPMU_AWUCRM_SDH2			(1 << 22)
-#define MPMU_AWUCRM_KEYPRESS			(1 << 21)
-#define MPMU_AWUCRM_TRACKBALL			(1 << 20)
-#define MPMU_AWUCRM_NEWROTARY			(1 << 19)
-#define MPMU_AWUCRM_RTC_ALARM			(1 << 17)
-#define MPMU_AWUCRM_AP2_TIMER_3			(1 << 13)
-#define MPMU_AWUCRM_AP2_TIMER_2			(1 << 12)
-#define MPMU_AWUCRM_AP2_TIMER_1			(1 << 11)
-#define MPMU_AWUCRM_AP1_TIMER_3			(1 << 10)
-#define MPMU_AWUCRM_AP1_TIMER_2			(1 << 9)
-#define MPMU_AWUCRM_AP1_TIMER_1			(1 << 8)
-#define MPMU_AWUCRM_WAKEUP(x)			(1 << ((x) & 0x7))
-
-enum {
-	POWER_MODE_ACTIVE = 0,
-	POWER_MODE_CORE_INTIDLE,
-	POWER_MODE_CORE_EXTIDLE,
-	POWER_MODE_APPS_IDLE,
-	POWER_MODE_APPS_SLEEP,
-	POWER_MODE_SYS_SLEEP,
-	POWER_MODE_HIBERNATE,
-	POWER_MODE_UDR,
-};
-
-extern int pxa910_set_wake(struct irq_data *data, unsigned int on);
-
-#endif
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
deleted file mode 100644
index 1e9389245d0e..000000000000
--- a/arch/arm/mach-mmp/pxa168.c
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/pxa168.c
- *
- *  Code specific to PXA168
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clk/mmp.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/mv_usb.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/mach/time.h>
-#include <asm/system_misc.h>
-
-#include "addr-map.h"
-#include "common.h"
-#include <linux/soc/mmp/cputype.h>
-#include "devices.h"
-#include "irqs.h"
-#include "mfp.h"
-#include "pxa168.h"
-#include "regs-apbc.h"
-#include "regs-apmu.h"
-#include "regs-usb.h"
-
-#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
-
-static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata =
-{
-	MFP_ADDR_X(GPIO0,   GPIO36,  0x04c),
-	MFP_ADDR_X(GPIO37,  GPIO55,  0x000),
-	MFP_ADDR_X(GPIO56,  GPIO123, 0x0e0),
-	MFP_ADDR_X(GPIO124, GPIO127, 0x0f4),
-
-	MFP_ADDR_END,
-};
-
-void __init pxa168_init_irq(void)
-{
-	icu_init_irq();
-}
-
-static int __init pxa168_init(void)
-{
-	if (cpu_is_pxa168()) {
-		mfp_init_base(MFPR_VIRT_BASE);
-		mfp_init_addr(pxa168_mfp_addr_map);
-		pxa168_clk_init(APB_PHYS_BASE + 0x50000,
-				AXI_PHYS_BASE + 0x82800,
-				APB_PHYS_BASE + 0x15000);
-	}
-
-	return 0;
-}
-postcore_initcall(pxa168_init);
-
-/* system timer - clock enabled, 3.25MHz */
-#define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
-#define APBC_TIMERS	APBC_REG(0x34)
-
-void __init pxa168_timer_init(void)
-{
-	/* this is early, we have to initialize the CCU registers by
-	 * ourselves instead of using clk_* API. Clock rate is defined
-	 * by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running
-	 */
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
-
-	/* 3.25MHz, bus/functional clock enabled, release reset */
-	__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
-
-	mmp_timer_init(IRQ_PXA168_TIMER1, 3250000);
-}
-
-void pxa168_clear_keypad_wakeup(void)
-{
-	uint32_t val;
-	uint32_t mask = APMU_PXA168_KP_WAKE_CLR;
-
-	/* wake event clear is needed in order to clear keypad interrupt */
-	val = __raw_readl(APMU_WAKE_CLR);
-	__raw_writel(val |  mask, APMU_WAKE_CLR);
-}
-
-/* on-chip devices */
-PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
-PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
-PXA168_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4026000, 0x30, 23, 24);
-PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
-PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
-PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
-PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
-PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
-PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
-PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
-PXA168_DEVICE(ssp1, "pxa168-ssp", 0, SSP1, 0xd401b000, 0x40, 52, 53);
-PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55);
-PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57);
-PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
-PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
-PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
-PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
-PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);
-
-struct resource pxa168_resource_gpio[] = {
-	{
-		.start	= 0xd4019000,
-		.end	= 0xd4019fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PXA168_GPIOX,
-		.end	= IRQ_PXA168_GPIOX,
-		.name	= "gpio_mux",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_gpio = {
-	.name		= "mmp-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa168_resource_gpio),
-	.resource	= pxa168_resource_gpio,
-};
-
-struct resource pxa168_usb_host_resources[] = {
-	/* USB Host conroller register base */
-	[0] = {
-		.start	= PXA168_U2H_REGBASE + U2x_CAPREGS_OFFSET,
-		.end	= PXA168_U2H_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
-	},
-	/* USB PHY register base */
-	[1] = {
-		.start	= PXA168_U2H_PHYBASE,
-		.end	= PXA168_U2H_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
-		.start	= IRQ_PXA168_USB2,
-		.end	= IRQ_PXA168_USB2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32);
-struct platform_device pxa168_device_usb_host = {
-	.name = "pxa-sph",
-	.id   = -1,
-	.dev  = {
-		.dma_mask = &pxa168_usb_host_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-
-	.num_resources = ARRAY_SIZE(pxa168_usb_host_resources),
-	.resource      = pxa168_usb_host_resources,
-};
-
-int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata)
-{
-	pxa168_device_usb_host.dev.platform_data = pdata;
-	return platform_device_register(&pxa168_device_usb_host);
-}
-
-void pxa168_restart(enum reboot_mode mode, const char *cmd)
-{
-	soft_restart(0xffff0000);
-}
diff --git a/arch/arm/mach-mmp/pxa168.h b/arch/arm/mach-mmp/pxa168.h
deleted file mode 100644
index c1547e098f09..000000000000
--- a/arch/arm/mach-mmp/pxa168.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_PXA168_H
-#define __ASM_MACH_PXA168_H
-
-#include <linux/reboot.h>
-
-extern void pxa168_timer_init(void);
-extern void __init pxa168_init_irq(void);
-extern void pxa168_restart(enum reboot_mode, const char *);
-extern void pxa168_clear_keypad_wakeup(void);
-
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-#include <video/pxa168fb.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/pxa168_eth.h>
-#include <linux/platform_data/mv_usb.h>
-#include <linux/soc/mmp/cputype.h>
-#include <linux/irqchip/mmp.h>
-
-#include "devices.h"
-
-extern struct mmp_device_desc pxa168_device_uart1;
-extern struct mmp_device_desc pxa168_device_uart2;
-extern struct mmp_device_desc pxa168_device_uart3;
-extern struct mmp_device_desc pxa168_device_twsi0;
-extern struct mmp_device_desc pxa168_device_twsi1;
-extern struct mmp_device_desc pxa168_device_pwm1;
-extern struct mmp_device_desc pxa168_device_pwm2;
-extern struct mmp_device_desc pxa168_device_pwm3;
-extern struct mmp_device_desc pxa168_device_pwm4;
-extern struct mmp_device_desc pxa168_device_ssp1;
-extern struct mmp_device_desc pxa168_device_ssp2;
-extern struct mmp_device_desc pxa168_device_ssp3;
-extern struct mmp_device_desc pxa168_device_ssp4;
-extern struct mmp_device_desc pxa168_device_ssp5;
-extern struct mmp_device_desc pxa168_device_nand;
-extern struct mmp_device_desc pxa168_device_fb;
-extern struct mmp_device_desc pxa168_device_keypad;
-extern struct mmp_device_desc pxa168_device_eth;
-
-/* pdata can be NULL */
-extern int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata);
-
-
-extern struct platform_device pxa168_device_gpio;
-
-static inline int pxa168_add_uart(int id)
-{
-	struct mmp_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa168_device_uart1; break;
-	case 2: d = &pxa168_device_uart2; break;
-	case 3: d = &pxa168_device_uart3; break;
-	}
-
-	if (d == NULL)
-		return -EINVAL;
-
-	return mmp_register_device(d, NULL, 0);
-}
-
-static inline int pxa168_add_twsi(int id, struct i2c_pxa_platform_data *data,
-				  struct i2c_board_info *info, unsigned size)
-{
-	struct mmp_device_desc *d = NULL;
-	int ret;
-
-	switch (id) {
-	case 0: d = &pxa168_device_twsi0; break;
-	case 1: d = &pxa168_device_twsi1; break;
-	default:
-		return -EINVAL;
-	}
-
-	ret = i2c_register_board_info(id, info, size);
-	if (ret)
-		return ret;
-
-	return mmp_register_device(d, data, sizeof(*data));
-}
-
-static inline int pxa168_add_pwm(int id)
-{
-	struct mmp_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa168_device_pwm1; break;
-	case 2: d = &pxa168_device_pwm2; break;
-	case 3: d = &pxa168_device_pwm3; break;
-	case 4: d = &pxa168_device_pwm4; break;
-	default:
-		return -EINVAL;
-	}
-
-	return mmp_register_device(d, NULL, 0);
-}
-
-static inline int pxa168_add_ssp(int id)
-{
-	struct mmp_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa168_device_ssp1; break;
-	case 2: d = &pxa168_device_ssp2; break;
-	case 3: d = &pxa168_device_ssp3; break;
-	case 4: d = &pxa168_device_ssp4; break;
-	case 5: d = &pxa168_device_ssp5; break;
-	default:
-		return -EINVAL;
-	}
-	return mmp_register_device(d, NULL, 0);
-}
-
-static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
-{
-	return mmp_register_device(&pxa168_device_nand, info, sizeof(*info));
-}
-
-static inline int pxa168_add_fb(struct pxa168fb_mach_info *mi)
-{
-	return mmp_register_device(&pxa168_device_fb, mi, sizeof(*mi));
-}
-
-static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data)
-{
-	if (cpu_is_pxa168())
-		data->clear_wakeup_event = pxa168_clear_keypad_wakeup;
-
-	return mmp_register_device(&pxa168_device_keypad, data, sizeof(*data));
-}
-
-static inline int pxa168_add_eth(struct pxa168_eth_platform_data *data)
-{
-	return mmp_register_device(&pxa168_device_eth, data, sizeof(*data));
-}
-#endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
deleted file mode 100644
index b19a069d9fab..000000000000
--- a/arch/arm/mach-mmp/pxa910.c
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/pxa910.c
- *
- *  Code specific to PXA910
- */
-#include <linux/clk/mmp.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqchip/mmp.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware/cache-tauros2.h>
-#include <asm/mach/time.h>
-#include "addr-map.h"
-#include "regs-apbc.h"
-#include <linux/soc/mmp/cputype.h>
-#include "irqs.h"
-#include "mfp.h"
-#include "devices.h"
-#include "pm-pxa910.h"
-#include "pxa910.h"
-
-#include "common.h"
-
-#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
-
-static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
-{
-	MFP_ADDR_X(GPIO0, GPIO54, 0xdc),
-	MFP_ADDR_X(GPIO67, GPIO98, 0x1b8),
-	MFP_ADDR_X(GPIO100, GPIO109, 0x238),
-
-	MFP_ADDR(GPIO123, 0xcc),
-	MFP_ADDR(GPIO124, 0xd0),
-
-	MFP_ADDR(DF_IO0, 0x40),
-	MFP_ADDR(DF_IO1, 0x3c),
-	MFP_ADDR(DF_IO2, 0x38),
-	MFP_ADDR(DF_IO3, 0x34),
-	MFP_ADDR(DF_IO4, 0x30),
-	MFP_ADDR(DF_IO5, 0x2c),
-	MFP_ADDR(DF_IO6, 0x28),
-	MFP_ADDR(DF_IO7, 0x24),
-	MFP_ADDR(DF_IO8, 0x20),
-	MFP_ADDR(DF_IO9, 0x1c),
-	MFP_ADDR(DF_IO10, 0x18),
-	MFP_ADDR(DF_IO11, 0x14),
-	MFP_ADDR(DF_IO12, 0x10),
-	MFP_ADDR(DF_IO13, 0xc),
-	MFP_ADDR(DF_IO14, 0x8),
-	MFP_ADDR(DF_IO15, 0x4),
-
-	MFP_ADDR(DF_nCS0_SM_nCS2, 0x44),
-	MFP_ADDR(DF_nCS1_SM_nCS3, 0x48),
-	MFP_ADDR(SM_nCS0, 0x4c),
-	MFP_ADDR(SM_nCS1, 0x50),
-	MFP_ADDR(DF_WEn, 0x54),
-	MFP_ADDR(DF_REn, 0x58),
-	MFP_ADDR(DF_CLE_SM_OEn, 0x5c),
-	MFP_ADDR(DF_ALE_SM_WEn, 0x60),
-	MFP_ADDR(SM_SCLK, 0x64),
-	MFP_ADDR(DF_RDY0, 0x68),
-	MFP_ADDR(SM_BE0, 0x6c),
-	MFP_ADDR(SM_BE1, 0x70),
-	MFP_ADDR(SM_ADV, 0x74),
-	MFP_ADDR(DF_RDY1, 0x78),
-	MFP_ADDR(SM_ADVMUX, 0x7c),
-	MFP_ADDR(SM_RDY, 0x80),
-
-	MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84),
-
-	MFP_ADDR_END,
-};
-
-void __init pxa910_init_irq(void)
-{
-	icu_init_irq();
-#ifdef CONFIG_PM
-	icu_irq_chip.irq_set_wake = pxa910_set_wake;
-#endif
-}
-
-static int __init pxa910_init(void)
-{
-	if (cpu_is_pxa910()) {
-#ifdef CONFIG_CACHE_TAUROS2
-		tauros2_init(0);
-#endif
-		mfp_init_base(MFPR_VIRT_BASE);
-		mfp_init_addr(pxa910_mfp_addr_map);
-		pxa910_clk_init(APB_PHYS_BASE + 0x50000,
-				AXI_PHYS_BASE + 0x82800,
-				APB_PHYS_BASE + 0x15000,
-				APB_PHYS_BASE + 0x3b000);
-	}
-
-	return 0;
-}
-postcore_initcall(pxa910_init);
-
-/* system timer - clock enabled, 3.25MHz */
-#define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
-#define APBC_TIMERS	APBC_REG(0x34)
-
-void __init pxa910_timer_init(void)
-{
-	/* reset and configure */
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
-	__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
-
-	mmp_timer_init(IRQ_PXA910_AP1_TIMER1, 3250000);
-}
-
-/* on-chip devices */
-
-/* NOTE: there are totally 3 UARTs on PXA910:
- *
- *   UART1   - Slow UART (can be used both by AP and CP)
- *   UART2/3 - Fast UART
- *
- * To be backward compatible with the legacy FFUART/BTUART/STUART sequence,
- * they are re-ordered as:
- *
- *   pxa910_device_uart1 - UART2 as FFUART
- *   pxa910_device_uart2 - UART3 as BTUART
- *
- * UART1 is not used by AP for the moment.
- */
-PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
-PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
-PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
-PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
-PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
-PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
-PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
-PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
-PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
-PXA910_DEVICE(disp, "mmp-disp", 0, LCD, 0xd420b000, 0x1ec);
-PXA910_DEVICE(fb, "mmp-fb", -1, NONE, 0, 0);
-PXA910_DEVICE(panel, "tpo-hvga", -1, NONE, 0, 0);
-
-struct resource pxa910_resource_gpio[] = {
-	{
-		.start	= 0xd4019000,
-		.end	= 0xd4019fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PXA910_AP_GPIO,
-		.end	= IRQ_PXA910_AP_GPIO,
-		.name	= "gpio_mux",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa910_device_gpio = {
-	.name		= "mmp-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa910_resource_gpio),
-	.resource	= pxa910_resource_gpio,
-};
-
-static struct resource pxa910_resource_rtc[] = {
-	{
-		.start	= 0xd4010000,
-		.end	= 0xd401003f,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PXA910_RTC_INT,
-		.end	= IRQ_PXA910_RTC_INT,
-		.name	= "rtc 1Hz",
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= IRQ_PXA910_RTC_ALARM,
-		.end	= IRQ_PXA910_RTC_ALARM,
-		.name	= "rtc alarm",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa910_device_rtc = {
-	.name		= "sa1100-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa910_resource_rtc),
-	.resource	= pxa910_resource_rtc,
-};
diff --git a/arch/arm/mach-mmp/pxa910.h b/arch/arm/mach-mmp/pxa910.h
deleted file mode 100644
index 7d229214065a..000000000000
--- a/arch/arm/mach-mmp/pxa910.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_PXA910_H
-#define __ASM_MACH_PXA910_H
-
-extern void pxa910_timer_init(void);
-extern void __init pxa910_init_irq(void);
-
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-#include <video/mmp_disp.h>
-#include <linux/irqchip/mmp.h>
-
-#include "devices.h"
-
-extern struct mmp_device_desc pxa910_device_uart1;
-extern struct mmp_device_desc pxa910_device_uart2;
-extern struct mmp_device_desc pxa910_device_twsi0;
-extern struct mmp_device_desc pxa910_device_twsi1;
-extern struct mmp_device_desc pxa910_device_pwm1;
-extern struct mmp_device_desc pxa910_device_pwm2;
-extern struct mmp_device_desc pxa910_device_pwm3;
-extern struct mmp_device_desc pxa910_device_pwm4;
-extern struct mmp_device_desc pxa910_device_nand;
-extern struct platform_device pxa168_device_usb_phy;
-extern struct platform_device pxa168_device_u2o;
-extern struct platform_device pxa168_device_u2ootg;
-extern struct platform_device pxa168_device_u2oehci;
-extern struct mmp_device_desc pxa910_device_disp;
-extern struct mmp_device_desc pxa910_device_fb;
-extern struct mmp_device_desc pxa910_device_panel;
-extern struct platform_device pxa910_device_gpio;
-extern struct platform_device pxa910_device_rtc;
-
-static inline int pxa910_add_uart(int id)
-{
-	struct mmp_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa910_device_uart1; break;
-	case 2: d = &pxa910_device_uart2; break;
-	}
-
-	if (d == NULL)
-		return -EINVAL;
-
-	return mmp_register_device(d, NULL, 0);
-}
-
-static inline int pxa910_add_twsi(int id, struct i2c_pxa_platform_data *data,
-				  struct i2c_board_info *info, unsigned size)
-{
-	struct mmp_device_desc *d = NULL;
-	int ret;
-
-	switch (id) {
-	case 0: d = &pxa910_device_twsi0; break;
-	case 1: d = &pxa910_device_twsi1; break;
-	default:
-		return -EINVAL;
-	}
-
-	ret = i2c_register_board_info(id, info, size);
-	if (ret)
-		return ret;
-
-	return mmp_register_device(d, data, sizeof(*data));
-}
-
-static inline int pxa910_add_pwm(int id)
-{
-	struct mmp_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa910_device_pwm1; break;
-	case 2: d = &pxa910_device_pwm2; break;
-	case 3: d = &pxa910_device_pwm3; break;
-	case 4: d = &pxa910_device_pwm4; break;
-	default:
-		return -EINVAL;
-	}
-
-	return mmp_register_device(d, NULL, 0);
-}
-
-static inline int pxa910_add_nand(struct pxa3xx_nand_platform_data *info)
-{
-	return mmp_register_device(&pxa910_device_nand, info, sizeof(*info));
-}
-#endif /* __ASM_MACH_PXA910_H */
diff --git a/arch/arm/mach-mmp/regs-apbc.h b/arch/arm/mach-mmp/regs-apbc.h
deleted file mode 100644
index d0d00c2cce38..000000000000
--- a/arch/arm/mach-mmp/regs-apbc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *   Application Peripheral Bus Clock Unit
- */
-
-#ifndef __ASM_MACH_REGS_APBC_H
-#define __ASM_MACH_REGS_APBC_H
-
-#include "addr-map.h"
-
-/* Common APB clock register bit definitions */
-#define APBC_APBCLK	(1 << 0)  /* APB Bus Clock Enable */
-#define APBC_FNCLK	(1 << 1)  /* Functional Clock Enable */
-#define APBC_RST	(1 << 2)  /* Reset Generation */
-
-/* Functional Clock Selection Mask */
-#define APBC_FNCLKSEL(x)	(((x) & 0xf) << 4)
-
-#endif /* __ASM_MACH_REGS_APBC_H */
diff --git a/arch/arm/mach-mmp/regs-apmu.h b/arch/arm/mach-mmp/regs-apmu.h
deleted file mode 100644
index e36f6503adfb..000000000000
--- a/arch/arm/mach-mmp/regs-apmu.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *   Application Subsystem Power Management Unit
- */
-
-#ifndef __ASM_MACH_REGS_APMU_H
-#define __ASM_MACH_REGS_APMU_H
-
-#include "addr-map.h"
-
-#define APMU_FNCLK_EN	(1 << 4)
-#define APMU_AXICLK_EN	(1 << 3)
-#define APMU_FNRST_DIS	(1 << 1)
-#define APMU_AXIRST_DIS	(1 << 0)
-
-/* Wake Clear Register */
-#define APMU_WAKE_CLR	APMU_REG(0x07c)
-
-#define APMU_PXA168_KP_WAKE_CLR		(1 << 7)
-#define APMU_PXA168_CFI_WAKE_CLR	(1 << 6)
-#define APMU_PXA168_XD_WAKE_CLR		(1 << 5)
-#define APMU_PXA168_MSP_WAKE_CLR	(1 << 4)
-#define APMU_PXA168_SD4_WAKE_CLR	(1 << 3)
-#define APMU_PXA168_SD3_WAKE_CLR	(1 << 2)
-#define APMU_PXA168_SD2_WAKE_CLR	(1 << 1)
-#define APMU_PXA168_SD1_WAKE_CLR	(1 << 0)
-
-#endif /* __ASM_MACH_REGS_APMU_H */
diff --git a/arch/arm/mach-mmp/regs-icu.h b/arch/arm/mach-mmp/regs-icu.h
deleted file mode 100644
index 410743d2b402..000000000000
--- a/arch/arm/mach-mmp/regs-icu.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *   Interrupt Control Unit
- */
-
-#ifndef __ASM_MACH_ICU_H
-#define __ASM_MACH_ICU_H
-
-#include "addr-map.h"
-
-#define ICU_VIRT_BASE	(AXI_VIRT_BASE + 0x82000)
-#define ICU_REG(x)	(ICU_VIRT_BASE + (x))
-
-#define ICU2_VIRT_BASE	(AXI_VIRT_BASE + 0x84000)
-#define ICU2_REG(x)	(ICU2_VIRT_BASE + (x))
-
-#define ICU_INT_CONF(n)		ICU_REG((n) << 2)
-#define ICU_INT_CONF_MASK	(0xf)
-
-/************ PXA168/PXA910 (MMP) *********************/
-#define ICU_INT_CONF_AP_INT	(1 << 6)
-#define ICU_INT_CONF_CP_INT	(1 << 5)
-#define ICU_INT_CONF_IRQ	(1 << 4)
-
-#define ICU_AP_FIQ_SEL_INT_NUM	ICU_REG(0x108)	/* AP FIQ Selected Interrupt */
-#define ICU_AP_IRQ_SEL_INT_NUM	ICU_REG(0x10C)	/* AP IRQ Selected Interrupt */
-#define ICU_AP_GBL_IRQ_MSK	ICU_REG(0x114)	/* AP Global Interrupt Mask */
-#define ICU_INT_STATUS_0	ICU_REG(0x128)	/* Interrupt Stuats 0 */
-#define ICU_INT_STATUS_1	ICU_REG(0x12C)	/* Interrupt Status 1 */
-
-/************************** MMP2 ***********************/
-
-/*
- * IRQ0/FIQ0 is routed to SP IRQ/FIQ.
- * IRQ1 is routed to PJ4 IRQ, and IRQ2 is routes to PJ4 FIQ.
- */
-#define ICU_INT_ROUTE_SP_IRQ		(1 << 4)
-#define ICU_INT_ROUTE_PJ4_IRQ		(1 << 5)
-#define ICU_INT_ROUTE_PJ4_FIQ		(1 << 6)
-
-#define MMP2_ICU_PJ4_IRQ_STATUS0	ICU_REG(0x138)
-#define MMP2_ICU_PJ4_IRQ_STATUS1	ICU_REG(0x13c)
-#define MMP2_ICU_PJ4_FIQ_STATUS0	ICU_REG(0x140)
-#define MMP2_ICU_PJ4_FIQ_STATUS1	ICU_REG(0x144)
-
-#define MMP2_ICU_INT4_STATUS		ICU_REG(0x150)
-#define MMP2_ICU_INT5_STATUS		ICU_REG(0x154)
-#define MMP2_ICU_INT17_STATUS		ICU_REG(0x158)
-#define MMP2_ICU_INT35_STATUS		ICU_REG(0x15c)
-#define MMP2_ICU_INT51_STATUS		ICU_REG(0x160)
-
-#define MMP2_ICU_INT4_MASK		ICU_REG(0x168)
-#define MMP2_ICU_INT5_MASK		ICU_REG(0x16C)
-#define MMP2_ICU_INT17_MASK		ICU_REG(0x170)
-#define MMP2_ICU_INT35_MASK		ICU_REG(0x174)
-#define MMP2_ICU_INT51_MASK		ICU_REG(0x178)
-
-#define MMP2_ICU_SP_IRQ_SEL		ICU_REG(0x100)
-#define MMP2_ICU_PJ4_IRQ_SEL		ICU_REG(0x104)
-#define MMP2_ICU_PJ4_FIQ_SEL		ICU_REG(0x108)
-
-#define MMP2_ICU_INVERT			ICU_REG(0x164)
-
-#define MMP2_ICU_INV_PMIC		(1 << 0)
-#define MMP2_ICU_INV_PERF		(1 << 1)
-#define MMP2_ICU_INV_COMMTX		(1 << 2)
-#define MMP2_ICU_INV_COMMRX		(1 << 3)
-
-#endif /* __ASM_MACH_ICU_H */
diff --git a/arch/arm/mach-mmp/regs-timers.h b/arch/arm/mach-mmp/regs-timers.h
index a69f4d7e3443..0cc4aca40e2c 100644
--- a/arch/arm/mach-mmp/regs-timers.h
+++ b/arch/arm/mach-mmp/regs-timers.h
@@ -6,11 +6,6 @@
 #ifndef __ASM_MACH_REGS_TIMERS_H
 #define __ASM_MACH_REGS_TIMERS_H
 
-#include "addr-map.h"
-
-#define TIMERS1_VIRT_BASE	(APB_VIRT_BASE + 0x14000)
-#define TIMERS2_VIRT_BASE	(APB_VIRT_BASE + 0x16000)
-
 #define TMR_CCR		(0x0000)
 #define TMR_TN_MM(n, m)	(0x0004 + ((n) << 3) + (((n) + (m)) << 2))
 #define TMR_CR(n)	(0x0028 + ((n) << 2))
diff --git a/arch/arm/mach-mmp/regs-usb.h b/arch/arm/mach-mmp/regs-usb.h
deleted file mode 100644
index ed0d1aa0ad6c..000000000000
--- a/arch/arm/mach-mmp/regs-usb.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
- */
-
-#ifndef __ASM_ARCH_REGS_USB_H
-#define __ASM_ARCH_REGS_USB_H
-
-#define PXA168_U2O_REGBASE	(0xd4208000)
-#define PXA168_U2O_PHYBASE	(0xd4207000)
-
-#define PXA168_U2H_REGBASE      (0xd4209000)
-#define PXA168_U2H_PHYBASE      (0xd4206000)
-
-#define MMP3_HSIC1_REGBASE	(0xf0001000)
-#define MMP3_HSIC1_PHYBASE	(0xf0001800)
-
-#define MMP3_HSIC2_REGBASE	(0xf0002000)
-#define MMP3_HSIC2_PHYBASE	(0xf0002800)
-
-#define MMP3_FSIC_REGBASE	(0xf0003000)
-#define MMP3_FSIC_PHYBASE	(0xf0003800)
-
-
-#define USB_REG_RANGE		(0x1ff)
-#define USB_PHY_RANGE		(0xff)
-
-/* registers */
-#define U2x_CAPREGS_OFFSET       0x100
-
-/* phy regs */
-#define UTMI_REVISION		0x0
-#define UTMI_CTRL		0x4
-#define UTMI_PLL		0x8
-#define UTMI_TX			0xc
-#define UTMI_RX			0x10
-#define UTMI_IVREF		0x14
-#define UTMI_T0			0x18
-#define UTMI_T1			0x1c
-#define UTMI_T2			0x20
-#define UTMI_T3			0x24
-#define UTMI_T4			0x28
-#define UTMI_T5			0x2c
-#define UTMI_RESERVE		0x30
-#define UTMI_USB_INT		0x34
-#define UTMI_DBG_CTL		0x38
-#define UTMI_OTG_ADDON		0x3c
-
-/* For UTMICTRL Register */
-#define UTMI_CTRL_USB_CLK_EN                    (1 << 31)
-/* pxa168 */
-#define UTMI_CTRL_SUSPEND_SET1                  (1 << 30)
-#define UTMI_CTRL_SUSPEND_SET2                  (1 << 29)
-#define UTMI_CTRL_RXBUF_PDWN                    (1 << 24)
-#define UTMI_CTRL_TXBUF_PDWN                    (1 << 11)
-
-#define UTMI_CTRL_INPKT_DELAY_SHIFT             30
-#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT		28
-#define UTMI_CTRL_PU_REF_SHIFT			20
-#define UTMI_CTRL_ARC_PULLDN_SHIFT              12
-#define UTMI_CTRL_PLL_PWR_UP_SHIFT              1
-#define UTMI_CTRL_PWR_UP_SHIFT                  0
-
-/* For UTMI_PLL Register */
-#define UTMI_PLL_PLLCALI12_SHIFT		29
-#define UTMI_PLL_PLLCALI12_MASK			(0x3 << 29)
-
-#define UTMI_PLL_PLLVDD18_SHIFT			27
-#define UTMI_PLL_PLLVDD18_MASK			(0x3 << 27)
-
-#define UTMI_PLL_PLLVDD12_SHIFT			25
-#define UTMI_PLL_PLLVDD12_MASK			(0x3 << 25)
-
-#define UTMI_PLL_CLK_BLK_EN_SHIFT               24
-#define CLK_BLK_EN                              (0x1 << 24)
-#define PLL_READY                               (0x1 << 23)
-#define KVCO_EXT                                (0x1 << 22)
-#define VCOCAL_START                            (0x1 << 21)
-
-#define UTMI_PLL_KVCO_SHIFT			15
-#define UTMI_PLL_KVCO_MASK                      (0x7 << 15)
-
-#define UTMI_PLL_ICP_SHIFT			12
-#define UTMI_PLL_ICP_MASK                       (0x7 << 12)
-
-#define UTMI_PLL_FBDIV_SHIFT                    4
-#define UTMI_PLL_FBDIV_MASK                     (0xFF << 4)
-
-#define UTMI_PLL_REFDIV_SHIFT                   0
-#define UTMI_PLL_REFDIV_MASK                    (0xF << 0)
-
-/* For UTMI_TX Register */
-#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT		27
-#define UTMI_TX_REG_EXT_FS_RCAL_MASK		(0xf << 27)
-
-#define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT	26
-#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK		(0x1 << 26)
-
-#define UTMI_TX_TXVDD12_SHIFT                   22
-#define UTMI_TX_TXVDD12_MASK                    (0x3 << 22)
-
-#define UTMI_TX_CK60_PHSEL_SHIFT                17
-#define UTMI_TX_CK60_PHSEL_MASK                 (0xf << 17)
-
-#define UTMI_TX_IMPCAL_VTH_SHIFT                14
-#define UTMI_TX_IMPCAL_VTH_MASK                 (0x7 << 14)
-
-#define REG_RCAL_START                          (0x1 << 12)
-
-#define UTMI_TX_LOW_VDD_EN_SHIFT                11
-
-#define UTMI_TX_AMP_SHIFT			0
-#define UTMI_TX_AMP_MASK			(0x7 << 0)
-
-/* For UTMI_RX Register */
-#define UTMI_REG_SQ_LENGTH_SHIFT                15
-#define UTMI_REG_SQ_LENGTH_MASK                 (0x3 << 15)
-
-#define UTMI_RX_SQ_THRESH_SHIFT                 4
-#define UTMI_RX_SQ_THRESH_MASK                  (0xf << 4)
-
-#define UTMI_OTG_ADDON_OTG_ON			(1 << 0)
-
-/* fsic registers */
-#define FSIC_MISC			0x4
-#define FSIC_INT			0x28
-#define FSIC_CTRL			0x30
-
-/* HSIC registers */
-#define HSIC_PAD_CTRL			0x4
-
-#define HSIC_CTRL			0x8
-#define HSIC_CTRL_HSIC_ENABLE		(1<<7)
-#define HSIC_CTRL_PLL_BYPASS		(1<<4)
-
-#define TEST_GRP_0			0xc
-#define TEST_GRP_1			0x10
-
-#define HSIC_INT			0x14
-#define HSIC_INT_READY_INT_EN		(1<<10)
-#define HSIC_INT_CONNECT_INT_EN		(1<<9)
-#define HSIC_INT_CORE_INT_EN		(1<<8)
-#define HSIC_INT_HS_READY		(1<<2)
-#define HSIC_INT_CONNECT		(1<<1)
-#define HSIC_INT_CORE			(1<<0)
-
-#define HSIC_CONFIG			0x18
-#define USBHSIC_CTRL			0x20
-
-#define HSIC_USB_CTRL			0x28
-#define HSIC_USB_CTRL_CLKEN		1
-#define	HSIC_USB_CLK_PHY		0x0
-#define HSIC_USB_CLK_PMU		0x1
-
-#endif /* __ASM_ARCH_PXA_U2O_H */
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
deleted file mode 100644
index ecc46c31004f..000000000000
--- a/arch/arm/mach-mmp/sram.c
+++ /dev/null
@@ -1,167 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/sram.c
- *
- *  based on mach-davinci/sram.c - DaVinci simple SRAM allocator
- *
- *  Copyright (c) 2011 Marvell Semiconductors Inc.
- *  All Rights Reserved
- *
- *  Add for mmp sram support - Leo Yan <leoy@marvell.com>
- */
-
-#include <linux/module.h>
-#include <linux/mod_devicetable.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/genalloc.h>
-
-#include <linux/platform_data/dma-mmp_tdma.h>
-
-struct sram_bank_info {
-	char *pool_name;
-	struct gen_pool *gpool;
-	int granularity;
-
-	phys_addr_t sram_phys;
-	void __iomem *sram_virt;
-	u32 sram_size;
-
-	struct list_head node;
-};
-
-static DEFINE_MUTEX(sram_lock);
-static LIST_HEAD(sram_bank_list);
-
-struct gen_pool *sram_get_gpool(char *pool_name)
-{
-	struct sram_bank_info *info = NULL;
-
-	if (!pool_name)
-		return NULL;
-
-	mutex_lock(&sram_lock);
-
-	list_for_each_entry(info, &sram_bank_list, node)
-		if (!strcmp(pool_name, info->pool_name))
-			break;
-
-	mutex_unlock(&sram_lock);
-
-	if (&info->node == &sram_bank_list)
-		return NULL;
-
-	return info->gpool;
-}
-EXPORT_SYMBOL(sram_get_gpool);
-
-static int sram_probe(struct platform_device *pdev)
-{
-	struct sram_platdata *pdata = pdev->dev.platform_data;
-	struct sram_bank_info *info;
-	struct resource *res;
-	int ret = 0;
-
-	if (!pdata || !pdata->pool_name)
-		return -ENODEV;
-
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, info);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no memory resource defined\n");
-		ret = -ENODEV;
-		goto out;
-	}
-
-	if (!resource_size(res))
-		return 0;
-
-	info->sram_phys   = (phys_addr_t)res->start;
-	info->sram_size   = resource_size(res);
-	info->sram_virt   = ioremap(info->sram_phys, info->sram_size);
-	info->pool_name	  = kstrdup(pdata->pool_name, GFP_KERNEL);
-	info->granularity = pdata->granularity;
-
-	info->gpool = gen_pool_create(ilog2(info->granularity), -1);
-	if (!info->gpool) {
-		dev_err(&pdev->dev, "create pool failed\n");
-		ret = -ENOMEM;
-		goto create_pool_err;
-	}
-
-	ret = gen_pool_add_virt(info->gpool, (unsigned long)info->sram_virt,
-				info->sram_phys, info->sram_size, -1);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "add new chunk failed\n");
-		ret = -ENOMEM;
-		goto add_chunk_err;
-	}
-
-	mutex_lock(&sram_lock);
-	list_add(&info->node, &sram_bank_list);
-	mutex_unlock(&sram_lock);
-
-	dev_info(&pdev->dev, "initialized\n");
-	return 0;
-
-add_chunk_err:
-	gen_pool_destroy(info->gpool);
-create_pool_err:
-	iounmap(info->sram_virt);
-	kfree(info->pool_name);
-out:
-	kfree(info);
-	return ret;
-}
-
-static int sram_remove(struct platform_device *pdev)
-{
-	struct sram_bank_info *info;
-
-	info = platform_get_drvdata(pdev);
-
-	if (info->sram_size) {
-		mutex_lock(&sram_lock);
-		list_del(&info->node);
-		mutex_unlock(&sram_lock);
-
-		gen_pool_destroy(info->gpool);
-		iounmap(info->sram_virt);
-		kfree(info->pool_name);
-	}
-
-	kfree(info);
-
-	return 0;
-}
-
-static const struct platform_device_id sram_id_table[] = {
-	{ "asram", MMP_ASRAM },
-	{ "isram", MMP_ISRAM },
-	{ }
-};
-
-static struct platform_driver sram_driver = {
-	.probe		= sram_probe,
-	.remove		= sram_remove,
-	.driver		= {
-		.name	= "mmp-sram",
-	},
-	.id_table	= sram_id_table,
-};
-
-static int __init sram_init(void)
-{
-	return platform_driver_register(&sram_driver);
-}
-core_initcall(sram_init);
-
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
deleted file mode 100644
index 7111535f325f..000000000000
--- a/arch/arm/mach-mmp/teton_bga.c
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/teton_bga.c
- *
- *  Support for the Marvell PXA168 Teton BGA Development Platform.
- *
- *  Author: Mark F. Brown <mark.brown314@gmail.com>
- *
- *  This code is based on aspenite.c
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/input.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-pxa168.h"
-#include "pxa168.h"
-#include "teton_bga.h"
-#include "irqs.h"
-
-#include "common.h"
-
-static unsigned long teton_bga_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO107_UART1_TXD,
-	GPIO108_UART1_RXD,
-
-	/* Keypad */
-	GPIO109_KP_MKIN1,
-	GPIO110_KP_MKIN0,
-	GPIO111_KP_MKOUT7,
-	GPIO112_KP_MKOUT6,
-
-	/* I2C Bus */
-	GPIO105_CI2C_SDA,
-	GPIO106_CI2C_SCL,
-
-	/* RTC */
-	GPIO78_GPIO,
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static unsigned int teton_bga_matrix_key_map[] = {
-	KEY(0, 6, KEY_ESC),
-	KEY(0, 7, KEY_ENTER),
-	KEY(1, 6, KEY_LEFT),
-	KEY(1, 7, KEY_RIGHT),
-};
-
-static struct matrix_keymap_data teton_bga_matrix_keymap_data = {
-	.keymap			= teton_bga_matrix_key_map,
-	.keymap_size		= ARRAY_SIZE(teton_bga_matrix_key_map),
-};
-
-static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = {
-	.matrix_key_rows        = 2,
-	.matrix_key_cols        = 8,
-	.matrix_keymap_data	= &teton_bga_matrix_keymap_data,
-	.debounce_interval      = 30,
-};
-
-static struct i2c_board_info teton_bga_i2c_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68),
-		.irq = MMP_GPIO_TO_IRQ(RTC_INT_GPIO)
-	},
-};
-
-static void __init teton_bga_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(teton_bga_pin_config));
-
-	/* on-chip devices */
-	pxa168_add_uart(1);
-	pxa168_add_keypad(&teton_bga_keypad_info);
-	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info));
-	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&pxa168_device_gpio);
-}
-
-MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = teton_bga_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/teton_bga.h b/arch/arm/mach-mmp/teton_bga.h
deleted file mode 100644
index 73050096f0bd..000000000000
--- a/arch/arm/mach-mmp/teton_bga.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Support for the Marvell PXA168 Teton BGA Development Platform.
- */
-#ifndef __ASM_MACH_TETON_BGA_H
-#define __ASM_MACH_TETON_BGA_H
-
-/* GPIOs */
-#define MMC_PWENA_GPIO		27
-#define USBHPENB_GPIO		55
-#define RTC_INT_GPIO		78
-#define LCD_VBLK_EN_GPIO	79
-#define LCD_DVDD_EN_GPIO	80
-#define RST_WIFI_GPIO		81
-#define CF_PWEN_GPIO		82
-#define USB_OC_GPIO		83
-#define PWM_GPIO		84
-#define USBHPENA_GPIO		85
-#define TS_INT_GPIO		86
-#define CIR_GPIO		108
-
-#endif /* __ASM_MACH_TETON_BGA_H */
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 41b2e8abc9e6..fcb190826dd1 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -29,32 +29,30 @@
 #include <linux/sched_clock.h>
 #include <asm/mach/time.h>
 
-#include "addr-map.h"
 #include "regs-timers.h"
-#include "regs-apbc.h"
-#include "irqs.h"
 #include <linux/soc/mmp/cputype.h>
 
-#define TIMERS_VIRT_BASE	TIMERS1_VIRT_BASE
-
 #define MAX_DELTA		(0xfffffffe)
 #define MIN_DELTA		(16)
 
-static void __iomem *mmp_timer_base = TIMERS_VIRT_BASE;
+static void __iomem *mmp_timer_base;
 
 /*
- * FIXME: the timer needs some delay to stablize the counter capture
+ * Read the timer through the CVWR register. Delay is required after requesting
+ * a read. The CR register cannot be directly read due to metastability issues
+ * documented in the PXA168 software manual.
  */
 static inline uint32_t timer_read(void)
 {
-	int delay = 100;
+	uint32_t val;
+	int delay = 3;
 
 	__raw_writel(1, mmp_timer_base + TMR_CVWR(1));
 
 	while (delay--)
-		cpu_relax();
+		val = __raw_readl(mmp_timer_base + TMR_CVWR(1));
 
-	return __raw_readl(mmp_timer_base + TMR_CVWR(1));
+	return val;
 }
 
 static u64 notrace mmp_read_sched_clock(void)
@@ -174,7 +172,7 @@ static void __init timer_config(void)
 	__raw_writel(0x2, mmp_timer_base + TMR_CER);
 }
 
-void __init mmp_timer_init(int irq, unsigned long rate)
+static void __init mmp_timer_init(int irq, unsigned long rate)
 {
 	timer_config();
 
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
deleted file mode 100644
index 345b2e6d5c7e..000000000000
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ /dev/null
@@ -1,315 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/ttc_dkb.c
- *
- *  Support for the Marvell PXA910-based TTC_DKB Development Platform.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/onenand.h>
-#include <linux/interrupt.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/mfd/88pm860x.h>
-#include <linux/platform_data/mv_usb.h>
-#include <linux/spi/spi.h>
-#include <linux/delay.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include "addr-map.h"
-#include "mfp-pxa910.h"
-#include "pxa910.h"
-#include "irqs.h"
-#include "regs-usb.h"
-
-#include "common.h"
-
-#define TTCDKB_GPIO_EXT0(x)	(MMP_NR_BUILTIN_GPIO + ((x < 0) ? 0 :	\
-				((x < 16) ? x : 15)))
-#define TTCDKB_GPIO_EXT1(x)	(MMP_NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \
-				((x < 16) ? x : 15)))
-
-/*
- * 16 board interrupts -- MAX7312 GPIO expander
- * 16 board interrupts -- PCA9575 GPIO expander
- * 24 board interrupts -- 88PM860x PMIC
- */
-#define TTCDKB_NR_IRQS		(MMP_NR_IRQS + 16 + 16 + 24)
-
-static unsigned long ttc_dkb_pin_config[] __initdata = {
-	/* UART2 */
-	GPIO47_UART2_RXD,
-	GPIO48_UART2_TXD,
-
-	/* DFI */
-	DF_IO0_ND_IO0,
-	DF_IO1_ND_IO1,
-	DF_IO2_ND_IO2,
-	DF_IO3_ND_IO3,
-	DF_IO4_ND_IO4,
-	DF_IO5_ND_IO5,
-	DF_IO6_ND_IO6,
-	DF_IO7_ND_IO7,
-	DF_IO8_ND_IO8,
-	DF_IO9_ND_IO9,
-	DF_IO10_ND_IO10,
-	DF_IO11_ND_IO11,
-	DF_IO12_ND_IO12,
-	DF_IO13_ND_IO13,
-	DF_IO14_ND_IO14,
-	DF_IO15_ND_IO15,
-	DF_nCS0_SM_nCS2_nCS0,
-	DF_ALE_SM_WEn_ND_ALE,
-	DF_CLE_SM_OEn_ND_CLE,
-	DF_WEn_DF_WEn,
-	DF_REn_DF_REn,
-	DF_RDY0_DF_RDY0,
-};
-
-static struct pxa_gpio_platform_data pxa910_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct mtd_partition ttc_dkb_onenand_partitions[] = {
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_1M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_8M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= (SZ_2M + SZ_1M),
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_32M + SZ_16M,
-		.mask_flags	= 0,
-	}
-};
-
-static struct onenand_platform_data ttc_dkb_onenand_info = {
-	.parts		= ttc_dkb_onenand_partitions,
-	.nr_parts	= ARRAY_SIZE(ttc_dkb_onenand_partitions),
-};
-
-static struct resource ttc_dkb_resource_onenand[] = {
-	[0] = {
-		.start	= SMC_CS0_PHYS_BASE,
-		.end	= SMC_CS0_PHYS_BASE + SZ_1M,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ttc_dkb_device_onenand = {
-	.name		= "onenand-flash",
-	.id		= -1,
-	.resource	= ttc_dkb_resource_onenand,
-	.num_resources	= ARRAY_SIZE(ttc_dkb_resource_onenand),
-	.dev		= {
-		.platform_data	= &ttc_dkb_onenand_info,
-	},
-};
-
-static struct platform_device *ttc_dkb_devices[] = {
-	&pxa910_device_gpio,
-	&pxa910_device_rtc,
-	&ttc_dkb_device_onenand,
-};
-
-static struct pca953x_platform_data max7312_data[] = {
-	{
-		.gpio_base	= TTCDKB_GPIO_EXT0(0),
-		.irq_base	= MMP_NR_IRQS,
-	},
-};
-
-static struct pm860x_platform_data ttc_dkb_pm8607_info = {
-	.irq_base       = IRQ_BOARD_START,
-};
-
-static struct i2c_board_info ttc_dkb_i2c_info[] = {
-	{
-		.type           = "88PM860x",
-		.addr           = 0x34,
-		.platform_data  = &ttc_dkb_pm8607_info,
-		.irq            = IRQ_PXA910_PMIC_INT,
-	},
-	{
-		.type		= "max7312",
-		.addr		= 0x23,
-		.irq		= MMP_GPIO_TO_IRQ(80),
-		.platform_data	= &max7312_data,
-	},
-};
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
-
-static struct mv_usb_platform_data ttc_usb_pdata = {
-	.vbus		= NULL,
-	.mode		= MV_USB_MODE_OTG,
-	.otg_force_a_bus_req = 1,
-	.phy_init	= pxa_usb_phy_init,
-	.phy_deinit	= pxa_usb_phy_deinit,
-	.set_vbus	= NULL,
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-static struct pxa3xx_nand_platform_data dkb_nand_info = {};
-#endif
-
-#if IS_ENABLED(CONFIG_MMP_DISP)
-/* path config */
-#define CFG_IOPADMODE(iopad)   (iopad)  /* 0x0 ~ 0xd */
-#define SCLK_SOURCE_SELECT(x)  (x << 30) /* 0x0 ~ 0x3 */
-/* link config */
-#define CFG_DUMBMODE(mode)     (mode << 28) /* 0x0 ~ 0x6*/
-static struct mmp_mach_path_config dkb_disp_config[] = {
-	[0] = {
-		.name = "mmp-parallel",
-		.overlay_num = 2,
-		.output_type = PATH_OUT_PARALLEL,
-		.path_config = CFG_IOPADMODE(0x1)
-			| SCLK_SOURCE_SELECT(0x1),
-		.link_config = CFG_DUMBMODE(0x2),
-	},
-};
-
-static struct mmp_mach_plat_info dkb_disp_info = {
-	.name = "mmp-disp",
-	.clk_name = "disp0",
-	.path_num = 1,
-	.paths = dkb_disp_config,
-};
-
-static struct mmp_buffer_driver_mach_info dkb_fb_info = {
-	.name = "mmp-fb",
-	.path_name = "mmp-parallel",
-	.overlay_id = 0,
-	.dmafetch_id = 1,
-	.default_pixfmt = PIXFMT_RGB565,
-};
-
-static void dkb_tpo_panel_power(int on)
-{
-	int err;
-	u32 spi_reset = mfp_to_gpio(MFP_PIN_GPIO106);
-
-	if (on) {
-		err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
-		if (err) {
-			pr_err("failed to request GPIO for TPO LCD RESET\n");
-			return;
-		}
-		gpio_direction_output(spi_reset, 0);
-		udelay(100);
-		gpio_set_value(spi_reset, 1);
-		gpio_free(spi_reset);
-	} else {
-		err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
-		if (err) {
-			pr_err("failed to request LCD RESET gpio\n");
-			return;
-		}
-		gpio_set_value(spi_reset, 0);
-		gpio_free(spi_reset);
-	}
-}
-
-static struct mmp_mach_panel_info dkb_tpo_panel_info = {
-	.name = "tpo-hvga",
-	.plat_path_name = "mmp-parallel",
-	.plat_set_onoff = dkb_tpo_panel_power,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias       = "tpo-hvga",
-		.platform_data  = &dkb_tpo_panel_info,
-		.bus_num        = 5,
-	}
-};
-
-static void __init add_disp(void)
-{
-	mmp_register_device(&pxa910_device_disp,
-		&dkb_disp_info, sizeof(dkb_disp_info));
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-	mmp_register_device(&pxa910_device_fb,
-		&dkb_fb_info, sizeof(dkb_fb_info));
-	mmp_register_device(&pxa910_device_panel,
-		&dkb_tpo_panel_info, sizeof(dkb_tpo_panel_info));
-}
-#endif
-
-static void __init ttc_dkb_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
-
-	/* on-chip devices */
-	pxa910_add_uart(1);
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-	pxa910_add_nand(&dkb_nand_info);
-#endif
-
-	/* off-chip devices */
-	pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
-	platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-#if IS_ENABLED(CONFIG_PHY_PXA_USB)
-	platform_device_register(&pxa168_device_usb_phy);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MV_UDC)
-	pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata;
-	platform_device_register(&pxa168_device_u2o);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
-	pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata;
-	platform_device_register(&pxa168_device_u2oehci);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MV_OTG)
-	pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
-	platform_device_register(&pxa168_device_u2ootg);
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_MMP_DISP)
-	add_disp();
-#endif
-}
-
-MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= TTCDKB_NR_IRQS,
-	.init_irq       = pxa910_init_irq,
-	.init_time	= pxa910_timer_init,
-	.init_machine   = ttc_dkb_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig
deleted file mode 100644
index 909c6573ba8b..000000000000
--- a/arch/arm/mach-moxart/Kconfig
+++ /dev/null
@@ -1,28 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ARCH_MOXART
-	bool "MOXA ART SoC"
-	depends on ARCH_MULTI_V4
-	depends on CPU_LITTLE_ENDIAN
-	select CPU_FA526
-	select ARM_DMA_MEM_BUFFERABLE
-	select FARADAY_FTINTC010
-	select FTTMR010_TIMER
-	select GPIOLIB
-	select PHYLIB if NETDEVICES
-	help
-	  Say Y here if you want to run your kernel on hardware with a
-	  MOXA ART SoC.
-	  The MOXA ART SoC is based on a Faraday FA526 ARMv4 32-bit
-	  192 MHz CPU with MMU and 16KB/8KB D/I-cache (UC-7112-LX).
-	  Used on models UC-7101, UC-7112/UC-7110, IA240/IA241, IA3341.
-
-if ARCH_MOXART
-
-config MACH_UC7112LX
-	bool "MOXA UC-7112-LX"
-	depends on ARCH_MOXART
-	help
-	  Say Y here if you intend to run this kernel on a MOXA
-	  UC-7112-LX embedded computer.
-
-endif
diff --git a/arch/arm/mach-moxart/Makefile b/arch/arm/mach-moxart/Makefile
deleted file mode 100644
index ded3e38fb98d..000000000000
--- a/arch/arm/mach-moxart/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Object file lists.
-
-obj-$(CONFIG_MACH_UC7112LX)	+= moxart.o
diff --git a/arch/arm/mach-moxart/moxart.c b/arch/arm/mach-moxart/moxart.c
deleted file mode 100644
index f1f58c0c0fa1..000000000000
--- a/arch/arm/mach-moxart/moxart.c
+++ /dev/null
@@ -1,6 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-moxart/moxart.c
- *
- * (C) Copyright 2013, Jonas Jensen <jonas.jensen@gmail.com>
- */
diff --git a/arch/arm/mach-mstar/Kconfig b/arch/arm/mach-mstar/Kconfig
index 5dbea7b485af..fa9709f30b46 100644
--- a/arch/arm/mach-mstar/Kconfig
+++ b/arch/arm/mach-mstar/Kconfig
@@ -20,11 +20,4 @@ config MACH_INFINITY
 	help
 	  Support for MStar/Sigmastar infinity IP camera SoCs.
 
-config MACH_MERCURY
-	bool "MStar/Sigmastar mercury SoC support"
-	default ARCH_MSTARV7
-	help
-	  Support for MStar/Sigmastar mercury dash camera SoCs.
-	  Note that older Mercury2 SoCs are ARM9 based and not supported.
-
 endif
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
index da92f94494cc..9de3bbc09c3a 100644
--- a/arch/arm/mach-mv78xx0/Kconfig
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -3,7 +3,7 @@ menuconfig ARCH_MV78XX0
 	bool "Marvell MV78xx0"
 	depends on ARCH_MULTI_V5
 	depends on CPU_LITTLE_ENDIAN
-	depends on ATAGS && UNUSED_BOARD_FILES
+	depends on ATAGS
 	select CPU_FEROCEON
 	select GPIOLIB
 	select MVEBU_MBUS
@@ -15,18 +15,6 @@ menuconfig ARCH_MV78XX0
 
 if ARCH_MV78XX0
 
-config MACH_DB78X00_BP
-	bool "Marvell DB-78x00-BP Development Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell DB-78x00-BP Development Board.
-
-config MACH_RD78X00_MASA
-	bool "Marvell RD-78x00-mASA Reference Design"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell RD-78x00-mASA Reference Design.
-
 config MACH_TERASTATION_WXL
 	bool "Buffalo WLX (Terastation Duo) NAS"
 	help
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
index a839e960b8c6..ddee6ae501bb 100644
--- a/arch/arm/mach-mv78xx0/Makefile
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -1,7 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+ccflags-y := -I$(srctree)/arch/arm/plat-orion/include
 
 obj-y				+= common.o mpp.o irq.o pcie.o
-obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
-obj-$(CONFIG_MACH_RD78X00_MASA)	+= rd78x00-masa-setup.o
 obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index 9aa765d4cdc8..62e982f74bc2 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -14,6 +14,9 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
 #include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include "mv78xx0.h"
@@ -21,6 +24,11 @@
 #include "mpp.h"
 
 
+#define TSWXL_AUTO_SWITCH	15
+#define TSWXL_USB_POWER1	30
+#define TSWXL_USB_POWER2	31
+
+
 /* This arch has 2 Giga Ethernet */
 
 static struct mv643xx_eth_platform_data db78x00_ge00_data = {
@@ -39,7 +47,7 @@ static struct mv_sata_platform_data db78x00_sata_data = {
 };
 
 static struct i2c_board_info __initdata db78x00_i2c_rtc = {
-	I2C_BOARD_INFO("ds1338", 0x68),
+	I2C_BOARD_INFO("rs5c372a", 0x32),
 };
 
 
@@ -57,9 +65,9 @@ static unsigned int wxl_mpp_config[] __initdata = {
 	MPP10_GE1_RXD2,
 	MPP11_GE1_RXD3,
 	MPP12_GPIO,
-	MPP13_SYSRST_OUTn,
-	MPP14_SATA1_ACTn,
-	MPP15_SATA0_ACTn,
+	MPP13_GPIO,
+	MPP14_GPIO,
+	MPP15_GPIO,
 	MPP16_GPIO,
 	MPP17_GPIO,
 	MPP18_GPIO,
@@ -73,7 +81,7 @@ static unsigned int wxl_mpp_config[] __initdata = {
 	MPP26_UA2_CTSn,
 	MPP27_UA2_RTSn,
 	MPP28_GPIO,
-	MPP29_SYSRST_OUTn,
+	MPP29_GPIO,
 	MPP30_GPIO,
 	MPP31_GPIO,
 	MPP32_GPIO,
@@ -84,19 +92,41 @@ static unsigned int wxl_mpp_config[] __initdata = {
 	MPP37_GPIO,
 	MPP38_GPIO,
 	MPP39_GPIO,
-	MPP40_UNUSED,
-	MPP41_UNUSED,
-	MPP42_UNUSED,
-	MPP43_UNUSED,
-	MPP44_UNUSED,
-	MPP45_UNUSED,
-	MPP46_UNUSED,
-	MPP47_UNUSED,
-	MPP48_SATA1_ACTn,
-	MPP49_SATA0_ACTn,
+	MPP40_GPIO,
+	MPP41_GPIO,
+	MPP42_GPIO,
+	MPP43_GPIO,
+	MPP44_GPIO,
+	MPP45_GPIO,
+	MPP46_GPIO,
+	MPP47_GPIO,
+	MPP48_GPIO,
+	MPP49_GPIO,
 	0
 };
 
+static struct gpio_keys_button tswxl_buttons[] = {
+	{
+		.code	   = KEY_OPTION,
+		.gpio	   = TSWXL_AUTO_SWITCH,
+		.desc	   = "Power-auto Switch",
+		.active_low     = 1,
+	}
+};
+
+static struct gpio_keys_platform_data tswxl_button_data = {
+	.buttons	= tswxl_buttons,
+	.nbuttons       = ARRAY_SIZE(tswxl_buttons),
+};
+
+static struct platform_device tswxl_button_device = {
+	.name	   = "gpio-keys",
+	.id	     = -1,
+	.num_resources  = 0,
+	.dev	    = {
+		.platform_data  = &tswxl_button_data,
+	},
+};
 
 static void __init wxl_init(void)
 {
@@ -111,7 +141,6 @@ static void __init wxl_init(void)
 	 */
 	mv78xx0_ehci0_init();
 	mv78xx0_ehci1_init();
-	mv78xx0_ehci2_init();
 	mv78xx0_ge00_init(&db78x00_ge00_data);
 	mv78xx0_ge01_init(&db78x00_ge01_data);
 	mv78xx0_sata_init(&db78x00_sata_data);
@@ -119,22 +148,23 @@ static void __init wxl_init(void)
 	mv78xx0_uart1_init();
 	mv78xx0_uart2_init();
 	mv78xx0_uart3_init();
+	mv78xx0_xor_init();
+	mv78xx0_crypto_init();
 	mv78xx0_i2c_init();
 	i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
+
+	//enable both usb ports
+	gpio_direction_output(TSWXL_USB_POWER1, 1);
+	gpio_direction_output(TSWXL_USB_POWER2, 1);
+
+	//enable rear switch
+	platform_device_register(&tswxl_button_device);
 }
 
 static int __init wxl_pci_init(void)
 {
-	if (machine_is_terastation_wxl()) {
-		/*
-		 * Assign the x16 PCIe slot on the board to CPU core
-		 * #0, and let CPU core #1 have the four x1 slots.
-		 */
-		if (mv78xx0_core_index() == 0)
-			mv78xx0_pcie_init(0, 1);
-		else
-			mv78xx0_pcie_init(1, 0);
-	}
+	if (machine_is_terastation_wxl() && mv78xx0_core_index() == 0)
+                mv78xx0_pcie_init(1, 1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 461a68945c26..679753fcc0ef 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -342,6 +342,29 @@ void __ref mv78xx0_timer_init(void)
 			IRQ_MV78XX0_TIMER_1, get_tclk());
 }
 
+/****************************************************************************
+* XOR engine
+****************************************************************************/
+void __init mv78xx0_xor_init(void)
+{
+	orion_xor0_init(XOR_PHYS_BASE,
+		XOR_PHYS_BASE + 0x200,
+		IRQ_MV78XX0_XOR_0, IRQ_MV78XX0_XOR_1);
+}
+
+/****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+****************************************************************************/
+void __init mv78xx0_crypto_init(void)
+{
+	mvebu_mbus_add_window_by_id(MV78XX0_MBUS_SRAM_TARGET,
+				MV78XX0_MBUS_SRAM_ATTR,
+				MV78XX0_SRAM_PHYS_BASE,
+			MV78XX0_SRAM_SIZE);
+	orion_crypto_init(CRYPTO_PHYS_BASE, MV78XX0_SRAM_PHYS_BASE,
+		SZ_8K, IRQ_MV78XX0_CRYPTO);
+}
+
 
 /*****************************************************************************
  * General
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
index d8c6c2400e27..9f1dfd595003 100644
--- a/arch/arm/mach-mv78xx0/common.h
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -43,6 +43,8 @@ void mv78xx0_uart0_init(void);
 void mv78xx0_uart1_init(void);
 void mv78xx0_uart2_init(void);
 void mv78xx0_uart3_init(void);
+void mv78xx0_xor_init(void);
+void mv78xx0_crypto_init(void);
 void mv78xx0_i2c_init(void);
 void mv78xx0_restart(enum reboot_mode, const char *);
 
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
deleted file mode 100644
index da633a33a0c1..000000000000
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ /dev/null
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-mv78xx0/db78x00-bp-setup.c
- *
- * Marvell DB-78x00-BP Development Board Setup
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/i2c.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "mv78xx0.h"
-#include "common.h"
-
-static struct mv643xx_eth_platform_data db78x00_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data db78x00_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(9),
-};
-
-static struct mv643xx_eth_platform_data db78x00_ge10_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(10),
-};
-
-static struct mv643xx_eth_platform_data db78x00_ge11_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
-};
-
-static struct mv_sata_platform_data db78x00_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct i2c_board_info __initdata db78x00_i2c_rtc = {
-	I2C_BOARD_INFO("ds1338", 0x68),
-};
-
-
-static void __init db78x00_init(void)
-{
-	/*
-	 * Basic MV78xx0 setup. Needs to be called early.
-	 */
-	mv78xx0_init();
-
-	/*
-	 * Partition on-chip peripherals between the two CPU cores.
-	 */
-	if (mv78xx0_core_index() == 0) {
-		mv78xx0_ehci0_init();
-		mv78xx0_ehci1_init();
-		mv78xx0_ehci2_init();
-		mv78xx0_ge00_init(&db78x00_ge00_data);
-		mv78xx0_ge01_init(&db78x00_ge01_data);
-		mv78xx0_ge10_init(&db78x00_ge10_data);
-		mv78xx0_ge11_init(&db78x00_ge11_data);
-		mv78xx0_sata_init(&db78x00_sata_data);
-		mv78xx0_uart0_init();
-		mv78xx0_uart2_init();
-		mv78xx0_i2c_init();
-		i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
-	} else {
-		mv78xx0_uart1_init();
-		mv78xx0_uart3_init();
-	}
-}
-
-static int __init db78x00_pci_init(void)
-{
-	if (machine_is_db78x00_bp()) {
-		/*
-		 * Assign the x16 PCIe slot on the board to CPU core
-		 * #0, and let CPU core #1 have the four x1 slots.
-		 */
-		if (mv78xx0_core_index() == 0)
-			mv78xx0_pcie_init(0, 1);
-		else
-			mv78xx0_pcie_init(1, 0);
-	}
-
-	return 0;
-}
-subsys_initcall(db78x00_pci_init);
-
-MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= MV78XX0_NR_IRQS,
-	.init_machine	= db78x00_init,
-	.map_io		= mv78xx0_map_io,
-	.init_early	= mv78xx0_init_early,
-	.init_irq	= mv78xx0_init_irq,
-	.init_time	= mv78xx0_timer_init,
-	.restart	= mv78xx0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/mv78xx0.h b/arch/arm/mach-mv78xx0/mv78xx0.h
index 3f19bef7d7ac..88efb1e44142 100644
--- a/arch/arm/mach-mv78xx0/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/mv78xx0.h
@@ -49,9 +49,15 @@
 #define MV78XX0_REGS_VIRT_BASE		IOMEM(0xfec00000)
 #define MV78XX0_REGS_SIZE		SZ_1M
 
+#define MV78XX0_SRAM_PHYS_BASE          (0xf2200000)
+#define MV78XX0_SRAM_SIZE               SZ_8K
+
 #define MV78XX0_PCIE_MEM_PHYS_BASE	0xc0000000
 #define MV78XX0_PCIE_MEM_SIZE		0x30000000
 
+#define MV78XX0_MBUS_SRAM_TARGET       0x09
+#define MV78XX0_MBUS_SRAM_ATTR         0x00
+
 /*
  * Core-specific peripheral registers.
  */
@@ -98,6 +104,8 @@
 #define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x51000)
 #define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x52000)
 
+#define XOR_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x60900)
+
 #define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x70000)
 #define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x74000)
 
@@ -106,6 +114,8 @@
 #define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x88000)
 #define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x8c000)
 
+#define CRYPTO_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE + 0x90000)
+
 #define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0xa0000)
 
 /*
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index 6190f538a124..533cb7856943 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -42,7 +42,7 @@ void __init mv78xx0_pcie_id(u32 *dev, u32 *rev)
 
 u32 pcie_port_size[8] = {
 	0,
-	0x30000000,
+	0x20000000,
 	0x10000000,
 	0x10000000,
 	0x08000000,
@@ -186,14 +186,14 @@ static struct pci_ops pcie_ops = {
 static void rc_pci_fixup(struct pci_dev *dev)
 {
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
-		int i;
+		struct resource *r;
 
 		dev->class &= 0xff;
 		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
-		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
+		pci_dev_for_each_resource(dev, r) {
+			r->start = 0;
+			r->end   = 0;
+			r->flags = 0;
 		}
 	}
 }
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
deleted file mode 100644
index 80ca8b1a81de..000000000000
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-mv78x00/rd78x00-masa-setup.c
- *
- * Marvell RD-78x00-mASA Development Board Setup
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "mv78xx0.h"
-#include "common.h"
-
-static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data rd78x00_masa_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(9),
-};
-
-static struct mv643xx_eth_platform_data rd78x00_masa_ge10_data = {
-};
-
-static struct mv643xx_eth_platform_data rd78x00_masa_ge11_data = {
-};
-
-static struct mv_sata_platform_data rd78x00_masa_sata_data = {
-	.n_ports	= 2,
-};
-
-static void __init rd78x00_masa_init(void)
-{
-	/*
-	 * Basic MV78x00 setup. Needs to be called early.
-	 */
-	mv78xx0_init();
-
-	/*
-	 * Partition on-chip peripherals between the two CPU cores.
-	 */
-	if (mv78xx0_core_index() == 0) {
-		mv78xx0_ehci0_init();
-		mv78xx0_ehci1_init();
-		mv78xx0_ge00_init(&rd78x00_masa_ge00_data);
-		mv78xx0_ge10_init(&rd78x00_masa_ge10_data);
-		mv78xx0_sata_init(&rd78x00_masa_sata_data);
-		mv78xx0_uart0_init();
-		mv78xx0_uart2_init();
-	} else {
-		mv78xx0_ehci2_init();
-		mv78xx0_ge01_init(&rd78x00_masa_ge01_data);
-		mv78xx0_ge11_init(&rd78x00_masa_ge11_data);
-		mv78xx0_uart1_init();
-		mv78xx0_uart3_init();
-	}
-}
-
-static int __init rd78x00_pci_init(void)
-{
-	/*
-	 * Assign all PCIe devices to CPU core #0.
-	 */
-	if (machine_is_rd78x00_masa() && mv78xx0_core_index() == 0)
-		mv78xx0_pcie_init(1, 1);
-
-	return 0;
-}
-subsys_initcall(rd78x00_pci_init);
-
-MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= MV78XX0_NR_IRQS,
-	.init_machine	= rd78x00_masa_init,
-	.map_io		= mv78xx0_map_io,
-	.init_early	= mv78xx0_init_early,
-	.init_irq	= mv78xx0_init_irq,
-	.init_time	= mv78xx0_timer_init,
-	.restart	= mv78xx0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index cb106899dd7c..569768a69ffc 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -1,8 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
-
-AFLAGS_coherency_ll.o		:= -Wa,-march=armv7-a
-CFLAGS_pmsu.o			:= -march=armv7-a
+ccflags-y := -I$(srctree)/arch/arm/plat-orion/include
 
 obj-$(CONFIG_MACH_MVEBU_ANY)	 += system-controller.o mvebu-soc-id.o
 
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index fd5d0c8ff695..04ad651d13a0 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -86,6 +86,9 @@ static int __init mvebu_scan_mem(unsigned long node, const char *uname,
 		base = dt_mem_next_cell(dt_root_addr_cells, &reg);
 		size = dt_mem_next_cell(dt_root_size_cells, &reg);
 
+		if (size < MVEBU_DDR_TRAINING_AREA_SZ)
+			pr_warn("Too little memory to reserve for DDR training\n");
+
 		memblock_reserve(base, MVEBU_DDR_TRAINING_AREA_SZ);
 	}
 
diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S
index eb81656e32d4..35930e03d9c6 100644
--- a/arch/arm/mach-mvebu/coherency_ll.S
+++ b/arch/arm/mach-mvebu/coherency_ll.S
@@ -20,6 +20,7 @@
 #include <asm/assembler.h>
 #include <asm/cp15.h>
 
+	.arch armv7-a
 	.text
 /*
  * Returns the coherency base address in r1 (r0 is untouched), or 0 if
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
index 8ff34753e760..73b2a86d6489 100644
--- a/arch/arm/mach-mvebu/kirkwood.c
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -15,6 +15,7 @@
 #include <linux/of_address.h>
 #include <linux/of_net.h>
 #include <linux/of_platform.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <asm/hardware/cache-feroceon-l2.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-mvebu/pm-board.c b/arch/arm/mach-mvebu/pm-board.c
index 7fa1806acd65..beec22e17e89 100644
--- a/arch/arm/mach-mvebu/pm-board.c
+++ b/arch/arm/mach-mvebu/pm-board.c
@@ -8,19 +8,19 @@
  */
 
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_gpio.h>
 #include <linux/slab.h>
 #include "common.h"
 
 #define ARMADA_PIC_NR_GPIOS 3
 
 static void __iomem *gpio_ctrl;
-static int pic_gpios[ARMADA_PIC_NR_GPIOS];
+static struct gpio_desc *pic_gpios[ARMADA_PIC_NR_GPIOS];
 static int pic_raw_gpios[ARMADA_PIC_NR_GPIOS];
 
 static void mvebu_armada_pm_enter(void __iomem *sdram_reg, u32 srcmd)
@@ -90,27 +90,17 @@ static int __init mvebu_armada_pm_init(void)
 		char *name;
 		struct of_phandle_args args;
 
-		pic_gpios[i] = of_get_named_gpio(np, "ctrl-gpios", i);
-		if (pic_gpios[i] < 0) {
-			ret = -ENODEV;
-			goto out;
-		}
-
 		name = kasprintf(GFP_KERNEL, "pic-pin%d", i);
 		if (!name) {
 			ret = -ENOMEM;
 			goto out;
 		}
 
-		ret = gpio_request(pic_gpios[i], name);
-		if (ret < 0) {
-			kfree(name);
-			goto out;
-		}
-
-		ret = gpio_direction_output(pic_gpios[i], 0);
-		if (ret < 0) {
-			gpio_free(pic_gpios[i]);
+		pic_gpios[i] = fwnode_gpiod_get_index(of_fwnode_handle(np),
+						      "ctrl", i, GPIOD_OUT_HIGH,
+						      name);
+		ret = PTR_ERR_OR_ZERO(pic_gpios[i]);
+		if (ret) {
 			kfree(name);
 			goto out;
 		}
@@ -118,7 +108,7 @@ static int __init mvebu_armada_pm_init(void)
 		ret = of_parse_phandle_with_fixed_args(np, "ctrl-gpios", 2,
 						       i, &args);
 		if (ret < 0) {
-			gpio_free(pic_gpios[i]);
+			gpiod_put(pic_gpios[i]);
 			kfree(name);
 			goto out;
 		}
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index af27a7156675..79c5171f06ec 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -23,8 +23,8 @@
 #include <linux/kernel.h>
 #include <linux/mbus.h>
 #include <linux/mvebu-pmsu.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/resource.h>
 #include <linux/slab.h>
@@ -291,6 +291,7 @@ int armada_370_xp_pmsu_idle_enter(unsigned long deepidle)
 
 	/* Test the CR_C bit and set it if it was cleared */
 	asm volatile(
+	".arch	armv7-a\n\t"
 	"mrc	p15, 0, r0, c1, c0, 0 \n\t"
 	"tst	r0, %0 \n\t"
 	"orreq	r0, r0, #(1 << 2) \n\t"
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 25c9d184fa4c..6e017fa306c8 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -11,13 +11,11 @@
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
-#include <linux/irqchip/mxs.h>
 #include <linux/reboot.h>
 #include <linux/micrel_phy.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/sys_soc.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -175,7 +173,7 @@ static void __init update_fec_mac_prop(enum mac_oui oui)
 
 		from = np;
 
-		if (of_get_property(np, "local-mac-address", NULL))
+		if (of_property_present(np, "local-mac-address"))
 			continue;
 
 		newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL);
@@ -358,7 +356,9 @@ static int __init mxs_restart_init(void)
 {
 	struct device_node *np;
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl");
+	if (!np)
+		np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl");
 	reset_addr = of_iomap(np, 0);
 	if (!reset_addr)
 		return -ENODEV;
@@ -393,8 +393,10 @@ static void __init mxs_machine_init(void)
 
 	root = of_find_node_by_path("/");
 	ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
-	if (ret)
+	if (ret) {
+		kfree(soc_dev_attr);
 		return;
+	}
 
 	soc_dev_attr->family = "Freescale MXS Family";
 	soc_dev_attr->soc_id = mxs_get_soc_id();
@@ -471,7 +473,6 @@ static const char *const mxs_dt_compat[] __initconst = {
 };
 
 DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)")
-	.handle_irq	= icoll_handle_irq,
 	.init_machine	= mxs_machine_init,
 	.init_late      = mxs_pm_init,
 	.dt_compat	= mxs_dt_compat,
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 51f88a297c4e..0eed60917dcf 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -5,25 +5,12 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/irq.h>
-#include <linux/dma-mapping.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 #include <asm/mach-types.h>
 
-#include <asm/cacheflush.h>
-#include <asm/hardware/cache-l2x0.h>
-
 /*
  * These are the only hard-coded address offsets we still have to use.
  */
diff --git a/arch/arm/mach-npcm/Makefile b/arch/arm/mach-npcm/Makefile
index 8d61fcd42fb1..ac83e1caf2ee 100644
--- a/arch/arm/mach-npcm/Makefile
+++ b/arch/arm/mach-npcm/Makefile
@@ -1,6 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-AFLAGS_headsmp.o		+= -march=armv7-a
-
 obj-$(CONFIG_ARCH_WPCM450)	+= wpcm450.o
 obj-$(CONFIG_ARCH_NPCM7XX)	+= npcm7xx.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-npcm/headsmp.S b/arch/arm/mach-npcm/headsmp.S
index c083fe09a07b..84d2b6daaf0b 100644
--- a/arch/arm/mach-npcm/headsmp.S
+++ b/arch/arm/mach-npcm/headsmp.S
@@ -6,6 +6,8 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 
+.arch armv7-a
+
 /*
  * The boot ROM does not start secondary CPUs in SVC mode, so we need to do that
  * here.
diff --git a/arch/arm/mach-npcm/platsmp.c b/arch/arm/mach-npcm/platsmp.c
index 21633c70fe7f..41891d3aa124 100644
--- a/arch/arm/mach-npcm/platsmp.c
+++ b/arch/arm/mach-npcm/platsmp.c
@@ -5,12 +5,9 @@
 #define pr_fmt(fmt) "nuvoton,npcm7xx-smp: " fmt
 
 #include <linux/delay.h>
-#include <linux/device.h>
 #include <linux/smp.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/of_platform.h>
 #include <linux/of_address.h>
 #include <asm/cacheflush.h>
 #include <asm/smp.h>
diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig
deleted file mode 100644
index eb9916233dea..000000000000
--- a/arch/arm/mach-nspire/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config ARCH_NSPIRE
-	bool "TI-NSPIRE based"
-	depends on ARCH_MULTI_V4_V5
-	depends on CPU_LITTLE_ENDIAN
-	select CPU_ARM926T
-	select GENERIC_IRQ_CHIP
-	select ARM_AMBA
-	select ARM_VIC
-	select ARM_TIMER_SP804
-	select NSPIRE_TIMER
-	help
-	  This enables support for systems using the TI-NSPIRE CPU
diff --git a/arch/arm/mach-nspire/Makefile b/arch/arm/mach-nspire/Makefile
deleted file mode 100644
index 4716b9b9aa7b..000000000000
--- a/arch/arm/mach-nspire/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y				+= nspire.o
diff --git a/arch/arm/mach-nspire/mmio.h b/arch/arm/mach-nspire/mmio.h
deleted file mode 100644
index 48e32f13f311..000000000000
--- a/arch/arm/mach-nspire/mmio.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *	linux/arch/arm/mach-nspire/mmio.h
- *
- *	Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- */
-
-#define NSPIRE_MISC_PHYS_BASE		0x900A0000
-#define NSPIRE_MISC_HWRESET		0x08
-
-#define NSPIRE_PWR_PHYS_BASE		0x900B0000
-#define NSPIRE_PWR_VIRT_BASE		0xFEEB0000
-#define NSPIRE_PWR_BUS_DISABLE1		0x18
-#define NSPIRE_PWR_BUS_DISABLE2		0x20
-
-#define NSPIRE_LCD_PHYS_BASE		0xC0000000
diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c
deleted file mode 100644
index 2d4abb0288b9..000000000000
--- a/arch/arm/mach-nspire/nspire.c
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *	linux/arch/arm/mach-nspire/nspire.c
- *
- *	Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- */
-#include <linux/init.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/arm-vic.h>
-#include <linux/clkdev.h>
-#include <linux/amba/bus.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-
-#include "mmio.h"
-
-static const char *const nspire_dt_match[] __initconst = {
-	"ti,nspire",
-	"ti,nspire-cx",
-	"ti,nspire-tp",
-	"ti,nspire-clp",
-	NULL,
-};
-
-static void nspire_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *base = ioremap(NSPIRE_MISC_PHYS_BASE, SZ_4K);
-	if (!base)
-		return;
-
-	writel(2, base + NSPIRE_MISC_HWRESET);
-}
-
-DT_MACHINE_START(NSPIRE, "TI-NSPIRE")
-	.dt_compat	= nspire_dt_match,
-	.restart	= nspire_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 538a960257cc..08ec6bd84ada 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -8,6 +8,7 @@ menuconfig ARCH_OMAP1
 	select ARCH_OMAP
 	select CLKSRC_MMIO
 	select FORCE_PCI if PCCARD
+	select GENERIC_IRQ_CHIP
 	select GPIOLIB
 	help
 	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
@@ -18,19 +19,6 @@ menu "TI OMAP1 specific features"
 
 comment "OMAP Core Type"
 
-config ARCH_OMAP730
-	depends on ARCH_MULTI_V5
-	bool "OMAP730 Based System"
-	select ARCH_OMAP_OTG
-	select CPU_ARM926T
-	select OMAP_MPU_TIMER
-
-config ARCH_OMAP850
-	depends on ARCH_MULTI_V5
-	bool "OMAP850 Based System"
-	select ARCH_OMAP_OTG
-	select CPU_ARM926T
-
 config ARCH_OMAP15XX
 	depends on ARCH_MULTI_V4T
 	default y
@@ -45,10 +33,6 @@ config ARCH_OMAP16XX
 	select CPU_ARM926T
 	select OMAP_DM_TIMER
 
-config ARCH_OMAP1_ANY
-	select ARCH_OMAP
-	def_bool ARCH_OMAP730 || ARCH_OMAP850 || ARCH_OMAP15XX || ARCH_OMAP16XX
-
 config ARCH_OMAP
 	bool
 
@@ -129,68 +113,12 @@ config ARCH_OMAP_OTG
 
 comment "OMAP Board Type"
 
-config MACH_OMAP_INNOVATOR
-	bool "TI Innovator"
-	depends on ARCH_OMAP15XX || ARCH_OMAP16XX
-	depends on UNUSED_BOARD_FILES
-	help
-          TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
-          have such a board.
-
-config MACH_OMAP_H2
-	bool "TI H2 Support"
-	depends on ARCH_OMAP16XX
-	depends on UNUSED_BOARD_FILES
-	help
-	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
-	  a board.
-
-config MACH_OMAP_H3
-	bool "TI H3 Support"
-	depends on ARCH_OMAP16XX
-	depends on UNUSED_BOARD_FILES
-	help
-	  TI OMAP 1710 H3 board support. Say Y here if you have such
-	  a board.
-
-config MACH_HERALD
-	bool "HTC Herald"
-	depends on ARCH_OMAP850
-	depends on UNUSED_BOARD_FILES
-	help
-	  HTC Herald smartphone support (AKA T-Mobile Wing, ...)
-
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
 	depends on ARCH_OMAP16XX
 	help
 	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
-          if you have such a board.
-
-config OMAP_OSK_MISTRAL
-	bool "Mistral QVGA board Support"
-	depends on MACH_OMAP_OSK
-	depends on UNUSED_BOARD_FILES
-	help
-	  The OSK supports an optional add-on board with a Quarter-VGA
-	  touchscreen, PDA-ish buttons, a resume button, bicolor LED,
-	  and camera connector.  Say Y here if you have this board.
-
-config MACH_OMAP_PERSEUS2
-	bool "TI Perseus2"
-	depends on ARCH_OMAP730
-	depends on UNUSED_BOARD_FILES
-	help
-	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
-	  a board.
-
-config MACH_OMAP_FSAMPLE
-	bool "TI F-Sample"
-	depends on ARCH_OMAP730
-	depends on UNUSED_BOARD_FILES
-	help
-	  Support for TI OMAP 850 F-Sample board. Say Y here if you have such
-	  a board.
+	  if you have such a board.
 
 config MACH_OMAP_PALMTE
 	bool "Palm Tungsten E"
@@ -201,26 +129,6 @@ config MACH_OMAP_PALMTE
 	  http://palmtelinux.sourceforge.net/ for more information.
 	  Say Y here if you have this PDA model, say N otherwise.
 
-config MACH_OMAP_PALMZ71
-	bool "Palm Zire71"
-	depends on ARCH_OMAP15XX
-	depends on UNUSED_BOARD_FILES
-	help
-	 Support for the Palm Zire71 PDA. To boot the kernel,
-	 you'll need a PalmOS compatible bootloader; check out
-	 http://hackndev.com/palm/z71 for more information.
-	 Say Y here if you have such a PDA, say N otherwise.
-
-config MACH_OMAP_PALMTT
-	bool "Palm Tungsten|T"
-	depends on ARCH_OMAP15XX
-	depends on UNUSED_BOARD_FILES
-	help
-	  Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
-	  need a PalmOS compatible bootloader (Garux); check out
-	  http://garux.sourceforge.net/ for more information.
-	  Say Y here if you have this PDA model, say N otherwise.
-
 config MACH_SX1
 	bool "Siemens SX1"
 	depends on ARCH_OMAP15XX
@@ -252,16 +160,6 @@ config MACH_AMS_DELTA
 	  Support for the Amstrad E3 (codename Delta) videophone. Say Y here
 	  if you have such a device.
 
-config MACH_OMAP_GENERIC
-	bool "Generic OMAP board"
-	depends on ARCH_OMAP15XX || ARCH_OMAP16XX
-	depends on UNUSED_BOARD_FILES
-	help
-          Support for generic OMAP-1510, 1610 or 1710 board with
-          no FPGA. Can be used as template for porting Linux to
-          custom OMAP boards. Say Y here if you have a custom
-          board.
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 506074b86333..d9e251ea4773 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,8 +3,6 @@
 # Makefile for the linux kernel.
 #
 
-ifdef CONFIG_ARCH_OMAP1_ANY
-
 # Common support
 obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
 	 serial.o devices.o dma.o omap-dma.o fb.o
@@ -31,33 +29,13 @@ usb-fs-$(CONFIG_USB_SUPPORT)		:= usb.o
 obj-y					+= $(usb-fs-m) $(usb-fs-y)
 
 # Specific board support
-obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o board-h2-mmc.o \
-					   board-nand.o
-obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o
-obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
-obj-$(CONFIG_MACH_OMAP_PERSEUS2)	+= board-perseus2.o board-nand.o
-obj-$(CONFIG_MACH_OMAP_FSAMPLE)		+= board-fsample.o board-nand.o
 obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
-obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o board-h3-mmc.o \
-					   board-nand.o
 obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
-obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
-obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
 obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
 obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o ams-delta-fiq.o \
 					   ams-delta-fiq-handler.o
 obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
-obj-$(CONFIG_MACH_HERALD)		+= board-htcherald.o
-
-ifeq ($(CONFIG_ARCH_OMAP15XX),y)
-# Innovator-1510 FPGA
-obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= fpga.o
-endif
 
 # GPIO
-obj-$(CONFIG_ARCH_OMAP730)		+= gpio7xx.o
-obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
 obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
 obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o
-
-endif
diff --git a/arch/arm/mach-omap1/Makefile.boot b/arch/arm/mach-omap1/Makefile.boot
deleted file mode 100644
index 2c771515a606..000000000000
--- a/arch/arm/mach-omap1/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y		+= 0x10008000
-params_phys-y		:= 0x10000100
-initrd_phys-y		:= 0x10800000
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 651c28d81132..16392720296c 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -11,7 +11,6 @@
 #include <linux/gpio/driver.h>
 #include <linux/gpio/machine.h>
 #include <linux/gpio/consumer.h>
-#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/input.h>
@@ -20,6 +19,7 @@
 #include <linux/mtd/nand-gpio.h>
 #include <linux/mtd/partitions.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regulator/consumer.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
@@ -176,20 +176,18 @@ static struct resource latch1_resources[] = {
 
 #define LATCH1_LABEL	"latch1"
 
-static struct bgpio_pdata latch1_pdata = {
-	.label	= LATCH1_LABEL,
-	.base	= -1,
-	.ngpio	= LATCH1_NGPIO,
+static const struct property_entry latch1_gpio_props[] = {
+	PROPERTY_ENTRY_STRING("label", LATCH1_LABEL),
+	PROPERTY_ENTRY_U32("ngpios", LATCH1_NGPIO),
+	{ }
 };
 
-static struct platform_device latch1_gpio_device = {
+static const struct platform_device_info latch1_gpio_devinfo = {
 	.name		= "basic-mmio-gpio",
 	.id		= 0,
-	.resource	= latch1_resources,
-	.num_resources	= ARRAY_SIZE(latch1_resources),
-	.dev		= {
-		.platform_data	= &latch1_pdata,
-	},
+	.res		= latch1_resources,
+	.num_res	= ARRAY_SIZE(latch1_resources),
+	.properties	= latch1_gpio_props,
 };
 
 #define LATCH1_PIN_LED_CAMERA		0
@@ -214,20 +212,18 @@ static struct resource latch2_resources[] = {
 
 #define LATCH2_LABEL	"latch2"
 
-static struct bgpio_pdata latch2_pdata = {
-	.label	= LATCH2_LABEL,
-	.base	= -1,
-	.ngpio	= LATCH2_NGPIO,
+static const struct property_entry latch2_gpio_props[] = {
+	PROPERTY_ENTRY_STRING("label", LATCH2_LABEL),
+	PROPERTY_ENTRY_U32("ngpios", LATCH2_NGPIO),
+	{ }
 };
 
-static struct platform_device latch2_gpio_device = {
+static struct platform_device_info latch2_gpio_devinfo = {
 	.name		= "basic-mmio-gpio",
 	.id		= 1,
-	.resource	= latch2_resources,
-	.num_resources	= ARRAY_SIZE(latch2_resources),
-	.dev		= {
-		.platform_data	= &latch2_pdata,
-	},
+	.res		= latch2_resources,
+	.num_res	= ARRAY_SIZE(latch2_resources),
+	.properties	= latch2_gpio_props,
 };
 
 #define LATCH2_PIN_LCD_VBLEN		0
@@ -543,14 +539,13 @@ static struct gpiod_lookup_table keybrd_pwr_gpio_table = {
 };
 
 static struct platform_device *ams_delta_devices[] __initdata = {
-	&latch1_gpio_device,
-	&latch2_gpio_device,
 	&ams_delta_kp_device,
 	&ams_delta_audio_device,
 	&ams_delta_serio_device,
 	&ams_delta_nand_device,
 	&ams_delta_lcd_device,
 	&cx20442_codec_device,
+	&modem_nreset_device,
 };
 
 static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = {
@@ -561,22 +556,6 @@ static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = {
 	&ams_delta_nand_gpio_table,
 };
 
-/*
- * Some drivers may not use GPIO lookup tables but need to be provided
- * with GPIO numbers.  The same applies to GPIO based IRQ lines - some
- * drivers may even not use GPIO layer but expect just IRQ numbers.
- * We could either define GPIO lookup tables then use them on behalf
- * of those devices, or we can use GPIO driver level methods for
- * identification of GPIO and IRQ numbers. For the purpose of the latter,
- * defina a helper function which identifies GPIO chips by their labels.
- */
-static int gpiochip_match_by_label(struct gpio_chip *chip, void *data)
-{
-	char *label = data;
-
-	return !strcmp(label, chip->label);
-}
-
 static struct gpiod_hog ams_delta_gpio_hogs[] = {
 	GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout",
 		 GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW),
@@ -616,14 +595,28 @@ static void __init modem_assign_irq(struct gpio_chip *chip)
  */
 static void __init omap_gpio_deps_init(void)
 {
+	struct gpio_device *gdev;
 	struct gpio_chip *chip;
 
-	chip = gpiochip_find(OMAP_GPIO_LABEL, gpiochip_match_by_label);
-	if (!chip) {
-		pr_err("%s: OMAP GPIO chip not found\n", __func__);
+	/*
+	 * Some drivers may not use GPIO lookup tables but need to be provided
+	 * with GPIO numbers. The same applies to GPIO based IRQ lines - some
+	 * drivers may even not use GPIO layer but expect just IRQ numbers.
+	 * We could either define GPIO lookup tables then use them on behalf
+	 * of those devices, or we can use GPIO driver level methods for
+	 * identification of GPIO and IRQ numbers.
+	 *
+	 * This reference will be leaked but that's alright as this device
+	 * never goes down.
+	 */
+	gdev = gpio_device_find_by_label(OMAP_GPIO_LABEL);
+	if (!gdev) {
+		pr_err("%s: OMAP GPIO device not found\n", __func__);
 		return;
 	}
 
+	chip = gpio_device_get_chip(gdev);
+
 	/*
 	 * Start with FIQ initialization as it may have to request
 	 * and release successfully each OMAP GPIO pin in turn.
@@ -699,6 +692,9 @@ static void __init ams_delta_init(void)
 	omap1_usb_init(&ams_delta_usb_config);
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 
+	platform_device_register_full(&latch1_gpio_devinfo);
+	platform_device_register_full(&latch2_gpio_devinfo);
+
 	/*
 	 * As soon as regulator consumers have been registered, assign their
 	 * dev_names to consumer supply entries of respective regulators.
@@ -783,26 +779,28 @@ static struct plat_serial8250_port ams_delta_modem_ports[] = {
 	{ },
 };
 
+static int ams_delta_modem_pm_activate(struct device *dev)
+{
+	modem_priv.regulator = regulator_get(dev, "RESET#");
+	if (IS_ERR(modem_priv.regulator))
+		return -EPROBE_DEFER;
+
+	return 0;
+}
+
+static struct dev_pm_domain ams_delta_modem_pm_domain = {
+	.activate	= ams_delta_modem_pm_activate,
+};
+
 static struct platform_device ams_delta_modem_device = {
 	.name	= "serial8250",
 	.id	= PLAT8250_DEV_PLATFORM1,
 	.dev		= {
 		.platform_data = ams_delta_modem_ports,
+		.pm_domain = &ams_delta_modem_pm_domain,
 	},
 };
 
-static int __init modem_nreset_init(void)
-{
-	int err;
-
-	err = platform_device_register(&modem_nreset_device);
-	if (err)
-		pr_err("Couldn't register the modem regulator device\n");
-
-	return err;
-}
-
-
 /*
  * This function expects MODEM IRQ number already assigned to the port.
  * The MODEM device requires its RESET# pin kept high during probe.
@@ -822,8 +820,6 @@ static int __init modem_nreset_init(void)
  */
 static int __init ams_delta_modem_init(void)
 {
-	int err;
-
 	if (!machine_is_ams_delta())
 		return -ENODEV;
 
@@ -832,46 +828,13 @@ static int __init ams_delta_modem_init(void)
 	/* Initialize the modem_nreset regulator consumer before use */
 	modem_priv.regulator = ERR_PTR(-ENODEV);
 
-	err = platform_device_register(&ams_delta_modem_device);
-
-	return err;
+	return platform_device_register(&ams_delta_modem_device);
 }
 arch_initcall_sync(ams_delta_modem_init);
 
-static int __init late_init(void)
-{
-	int err;
-
-	err = modem_nreset_init();
-	if (err)
-		return err;
-
-	/*
-	 * Once the modem device is registered, the modem_nreset
-	 * regulator can be requested on behalf of that device.
-	 */
-	modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev,
-			"RESET#");
-	if (IS_ERR(modem_priv.regulator)) {
-		err = PTR_ERR(modem_priv.regulator);
-		goto unregister;
-	}
-	return 0;
-
-unregister:
-	platform_device_unregister(&ams_delta_modem_device);
-	return err;
-}
-
-static void __init ams_delta_init_late(void)
-{
-	omap1_init_late();
-	late_init();
-}
-
 static void __init ams_delta_map_io(void)
 {
-	omap15xx_map_io();
+	omap1_map_io();
 	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
 }
 
@@ -881,9 +844,8 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	.map_io		= ams_delta_map_io,
 	.init_early	= omap1_init_early,
 	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
 	.init_machine	= ams_delta_init,
-	.init_late	= ams_delta_init_late,
+	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
 	.restart	= omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
deleted file mode 100644
index f21e15c7b973..000000000000
--- a/arch/arm/mach-omap1/board-fsample.c
+++ /dev/null
@@ -1,366 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-fsample.c
- *
- * Modified from board-perseus2.c
- *
- * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
- * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/soc/ti/omap1-io.h>
-#include <linux/platform_data/keypad-omap.h>
-#include "tc.h"
-
-#include "mux.h"
-#include "flash.h"
-#include "hardware.h"
-#include "iomap.h"
-#include "common.h"
-#include "fpga.h"
-
-/* fsample is pretty close to p2-sample */
-
-#define fsample_cpld_read(reg) __raw_readb(reg)
-#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
-
-#define FSAMPLE_CPLD_BASE    0xE8100000
-#define FSAMPLE_CPLD_SIZE    SZ_4K
-#define FSAMPLE_CPLD_START   0x05080000
-
-#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
-#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
-#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
-#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
-
-#define FSAMPLE_CPLD_BIT_BT_RESET         0
-#define FSAMPLE_CPLD_BIT_LCD_RESET        1
-#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
-#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
-#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
-#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
-#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
-#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
-#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
-#define FSAMPLE_CPLD_BIT_OTG_RESET        9
-
-#define fsample_cpld_set(bit) \
-    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
-
-#define fsample_cpld_clear(bit) \
-    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
-
-static const unsigned int fsample_keymap[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_LEFT),
-	KEY(3, 0, KEY_DOWN),
-	KEY(4, 0, KEY_ENTER),
-	KEY(0, 1, KEY_F10),
-	KEY(1, 1, KEY_SEND),
-	KEY(2, 1, KEY_END),
-	KEY(3, 1, KEY_VOLUMEDOWN),
-	KEY(4, 1, KEY_VOLUMEUP),
-	KEY(5, 1, KEY_RECORD),
-	KEY(0, 2, KEY_F9),
-	KEY(1, 2, KEY_3),
-	KEY(2, 2, KEY_6),
-	KEY(3, 2, KEY_9),
-	KEY(4, 2, KEY_KPDOT),
-	KEY(0, 3, KEY_BACK),
-	KEY(1, 3, KEY_2),
-	KEY(2, 3, KEY_5),
-	KEY(3, 3, KEY_8),
-	KEY(4, 3, KEY_0),
-	KEY(5, 3, KEY_KPSLASH),
-	KEY(0, 4, KEY_HOME),
-	KEY(1, 4, KEY_1),
-	KEY(2, 4, KEY_4),
-	KEY(3, 4, KEY_7),
-	KEY(4, 4, KEY_KPASTERISK),
-	KEY(5, 4, KEY_POWER),
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= H2P2_DBG_FPGA_ETHR_START,	/* Physical */
-		.end	= H2P2_DBG_FPGA_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_7XX_MPU_EXT_NIRQ,
-		.end	= 0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static void __init fsample_init_smc91x(void)
-{
-	__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-	__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
-		   H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-}
-
-static struct mtd_partition nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* rest of flash is a file system */
-	{
-	      .name		= "rootfs",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	},
-};
-
-static struct physmap_flash_data nor_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= nor_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_partitions),
-};
-
-static struct resource nor_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nor_resource,
-};
-
-#define FSAMPLE_NAND_RB_GPIO_PIN	62
-
-static int nand_dev_ready(struct nand_chip *chip)
-{
-	return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN);
-}
-
-static struct platform_nand_data nand_data = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.options		= NAND_SAMSUNG_LP_OPTIONS,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= omap1_nand_cmd_ctl,
-		.dev_ready	= nand_dev_ready,
-	},
-};
-
-static struct resource nand_resource = {
-	.start		= OMAP_CS3_PHYS,
-	.end		= OMAP_CS3_PHYS + SZ_4K - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nand_device = {
-	.name		= "gen_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nand_resource,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource kp_resources[] = {
-	[0] = {
-		.start	= INT_7XX_MPUIO_KEYPAD,
-		.end	= INT_7XX_MPUIO_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data fsample_keymap_data = {
-	.keymap		= fsample_keymap,
-	.keymap_size	= ARRAY_SIZE(fsample_keymap),
-};
-
-static struct omap_kp_platform_data kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &fsample_keymap_data,
-	.delay		= 4,
-};
-
-static struct platform_device kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(kp_resources),
-	.resource	= kp_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&nor_device,
-	&nand_device,
-	&smc91x_device,
-	&kp_device,
-};
-
-static const struct omap_lcd_config fsample_lcd_config = {
-	.ctrl_name	= "internal",
-};
-
-static void __init omap_fsample_init(void)
-{
-	/* Early, board-dependent init */
-
-	/*
-	 * Hold GSM Reset until needed
-	 */
-	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
-
-	/*
-	 * UARTs -> done automagically by 8250 driver
-	 */
-
-	/*
-	 * CSx timings, GPIO Mux ... setup
-	 */
-
-	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
-
-	/*
-	 * Ethernet support through the debug board
-	 * CS1 timings setup
-	 */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
-
-	/*
-	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
-	 * It is used as the Ethernet controller interrupt
-	 */
-	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
-			OMAP7XX_IO_CONF_9);
-
-	fsample_init_smc91x();
-
-	BUG_ON(gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0);
-	gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
-
-	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
-	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
-	/* Mux pins for keypad */
-	omap_cfg_reg(E2_7XX_KBR0);
-	omap_cfg_reg(J7_7XX_KBR1);
-	omap_cfg_reg(E1_7XX_KBR2);
-	omap_cfg_reg(F3_7XX_KBR3);
-	omap_cfg_reg(D2_7XX_KBR4);
-	omap_cfg_reg(C2_7XX_KBC0);
-	omap_cfg_reg(D3_7XX_KBC1);
-	omap_cfg_reg(E4_7XX_KBC2);
-	omap_cfg_reg(F4_7XX_KBC3);
-	omap_cfg_reg(E3_7XX_KBC4);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	omapfb_set_lcd_config(&fsample_lcd_config);
-}
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc omap_fsample_io_desc[] __initdata = {
-	{
-		.virtual	= H2P2_DBG_FPGA_BASE,
-		.pfn		= __phys_to_pfn(H2P2_DBG_FPGA_START),
-		.length		= H2P2_DBG_FPGA_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= FSAMPLE_CPLD_BASE,
-		.pfn		= __phys_to_pfn(FSAMPLE_CPLD_START),
-		.length		= FSAMPLE_CPLD_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init omap_fsample_map_io(void)
-{
-	omap15xx_map_io();
-	iotable_init(omap_fsample_io_desc,
-		     ARRAY_SIZE(omap_fsample_io_desc));
-}
-
-MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
-/* Maintainer: Brian Swetland <swetland@google.com> */
-	.atag_offset	= 0x100,
-	.map_io		= omap_fsample_map_io,
-	.init_early	= omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= omap_fsample_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
deleted file mode 100644
index 3b2bcaf4bb01..000000000000
--- a/arch/arm/mach-omap1/board-generic.c
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-generic.c
- *
- * Modified from board-innovator1510.c
- *
- * Code for generic OMAP board. Should work on many OMAP systems where
- * the device drivers take care of all the necessary hardware initialization.
- * Do not put any board specific code to this file; create a new machine
- * type if you need custom low-level initializations.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "hardware.h"
-#include "mux.h"
-#include "usb.h"
-#include "common.h"
-
-/* assume no Mini-AB port */
-
-#ifdef CONFIG_ARCH_OMAP15XX
-static struct omap_usb_config generic1510_usb_config __initdata = {
-	.register_host	= 1,
-	.register_dev	= 1,
-	.hmc_mode	= 16,
-	.pins[0]	= 3,
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-static struct omap_usb_config generic1610_usb_config __initdata = {
-#ifdef CONFIG_USB_OTG
-	.otg		= 1,
-#endif
-	.register_host	= 1,
-	.register_dev	= 1,
-	.hmc_mode	= 16,
-	.pins[0]	= 6,
-};
-#endif
-
-static void __init omap_generic_init(void)
-{
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap15xx()) {
-		/* mux pins for uarts */
-		omap_cfg_reg(UART1_TX);
-		omap_cfg_reg(UART1_RTS);
-		omap_cfg_reg(UART2_TX);
-		omap_cfg_reg(UART2_RTS);
-		omap_cfg_reg(UART3_TX);
-		omap_cfg_reg(UART3_RX);
-
-		omap1_usb_init(&generic1510_usb_config);
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
-	if (!cpu_is_omap1510()) {
-		omap1_usb_init(&generic1610_usb_config);
-	}
-#endif
-
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-}
-
-MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
-	/* Maintainer: Tony Lindgren <tony@atomide.com> */
-	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
-	.init_early	= omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= omap_generic_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
deleted file mode 100644
index 06c5404078aa..000000000000
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-h2-mmc.c
- *
- * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
- * Author: Felipe Balbi <felipe.lima@indt.org.br>
- *
- * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is:
- * Copyright (C) 2006 Nokia Corporation
- */
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/gpio-omap.h>
-#include <linux/mfd/tps65010.h>
-
-#include "board-h2.h"
-#include "mmc.h"
-
-#if IS_ENABLED(CONFIG_MMC_OMAP)
-
-static int mmc_set_power(struct device *dev, int slot, int power_on,
-				int vdd)
-{
-	gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on);
-	return 0;
-}
-
-static int mmc_late_init(struct device *dev)
-{
-	int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
-	if (ret < 0)
-		return ret;
-
-	gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0);
-
-	return ret;
-}
-
-static void mmc_cleanup(struct device *dev)
-{
-	gpio_free(H2_TPS_GPIO_MMC_PWR_EN);
-}
-
-/*
- * H2 could use the following functions tested:
- * - mmc_get_cover_state that uses OMAP_MPUIO(1)
- * - mmc_get_wp that uses OMAP_MPUIO(3)
- */
-static struct omap_mmc_platform_data mmc1_data = {
-	.nr_slots                       = 1,
-	.init				= mmc_late_init,
-	.cleanup			= mmc_cleanup,
-	.slots[0]       = {
-		.set_power              = mmc_set_power,
-		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
-		.name                   = "mmcblk",
-	},
-};
-
-static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
-
-void __init h2_mmc_init(void)
-{
-	mmc_data[0] = &mmc1_data;
-	omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC);
-}
-
-#else
-
-void __init h2_mmc_init(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
deleted file mode 100644
index f28a4c3ea501..000000000000
--- a/arch/arm/mach-omap1/board-h2.c
+++ /dev/null
@@ -1,448 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-h2.c
- *
- * Board specific inits for OMAP-1610 H2
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- *
- * H2 specific changes and cleanup
- * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
- */
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/mfd/tps65010.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-#include <linux/omap-dma.h>
-#include <linux/platform_data/gpio-omap.h>
-#include <linux/platform_data/keypad-omap.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "tc.h"
-#include "mux.h"
-#include "flash.h"
-#include "hardware.h"
-#include "usb.h"
-#include "common.h"
-#include "board-h2.h"
-
-/* The first 16 SoC GPIO lines are on this GPIO chip */
-#define OMAP_GPIO_LABEL			"gpio-0-15"
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define OMAP1610_ETHR_START		0x04000300
-
-static const unsigned int h2_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_3),
-	KEY(3, 0, KEY_F10),
-	KEY(4, 0, KEY_F5),
-	KEY(5, 0, KEY_9),
-	KEY(0, 1, KEY_DOWN),
-	KEY(1, 1, KEY_UP),
-	KEY(2, 1, KEY_2),
-	KEY(3, 1, KEY_F9),
-	KEY(4, 1, KEY_F7),
-	KEY(5, 1, KEY_0),
-	KEY(0, 2, KEY_ENTER),
-	KEY(1, 2, KEY_6),
-	KEY(2, 2, KEY_1),
-	KEY(3, 2, KEY_F2),
-	KEY(4, 2, KEY_F6),
-	KEY(5, 2, KEY_HOME),
-	KEY(0, 3, KEY_8),
-	KEY(1, 3, KEY_5),
-	KEY(2, 3, KEY_F12),
-	KEY(3, 3, KEY_F3),
-	KEY(4, 3, KEY_F8),
-	KEY(5, 3, KEY_END),
-	KEY(0, 4, KEY_7),
-	KEY(1, 4, KEY_4),
-	KEY(2, 4, KEY_F11),
-	KEY(3, 4, KEY_F1),
-	KEY(4, 4, KEY_F4),
-	KEY(5, 4, KEY_ESC),
-	KEY(0, 5, KEY_F13),
-	KEY(1, 5, KEY_F14),
-	KEY(2, 5, KEY_F15),
-	KEY(3, 5, KEY_F16),
-	KEY(4, 5, KEY_SLEEP),
-};
-
-static struct mtd_partition h2_nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* file system */
-	{
-	      .name		= "filesystem",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data h2_nor_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= h2_nor_partitions,
-	.nr_parts	= ARRAY_SIZE(h2_nor_partitions),
-};
-
-static struct resource h2_nor_resource = {
-	/* This is on CS3, wherever it's mapped */
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device h2_nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &h2_nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &h2_nor_resource,
-};
-
-static struct mtd_partition h2_nand_partitions[] = {
-#if 0
-	/* REVISIT:  enable these partitions if you make NAND BOOT
-	 * work on your H2 (rev C or newer); published versions of
-	 * x-load only support P2 and H3.
-	 */
-	{
-		.name		= "xloader",
-		.offset		= 0,
-		.size		= 64 * 1024,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "bootloader",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 256 * 1024,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 192 * 1024,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * SZ_1M,
-	},
-#endif
-	{
-		.name		= "filesystem",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	},
-};
-
-#define H2_NAND_RB_GPIO_PIN	62
-
-static int h2_nand_dev_ready(struct nand_chip *chip)
-{
-	return gpio_get_value(H2_NAND_RB_GPIO_PIN);
-}
-
-static struct platform_nand_data h2_nand_platdata = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.nr_partitions		= ARRAY_SIZE(h2_nand_partitions),
-		.partitions		= h2_nand_partitions,
-		.options		= NAND_SAMSUNG_LP_OPTIONS,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= omap1_nand_cmd_ctl,
-		.dev_ready	= h2_nand_dev_ready,
-	},
-};
-
-static struct resource h2_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device h2_nand_device = {
-	.name		= "gen_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &h2_nand_platdata,
-	},
-	.num_resources	= 1,
-	.resource	= &h2_nand_resource,
-};
-
-static struct smc91x_platdata h2_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource h2_smc91x_resources[] = {
-	[0] = {
-		.start	= OMAP1610_ETHR_START,		/* Physical */
-		.end	= OMAP1610_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device h2_smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &h2_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(h2_smc91x_resources),
-	.resource	= h2_smc91x_resources,
-};
-
-static struct resource h2_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data h2_keymap_data = {
-	.keymap		= h2_keymap,
-	.keymap_size	= ARRAY_SIZE(h2_keymap),
-};
-
-static struct omap_kp_platform_data h2_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &h2_keymap_data,
-	.rep		= true,
-	.delay		= 9,
-	.dbounce	= true,
-};
-
-static struct platform_device h2_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &h2_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(h2_kp_resources),
-	.resource	= h2_kp_resources,
-};
-
-static const struct gpio_led h2_gpio_led_pins[] = {
-	{
-		.name		= "h2:red",
-		.default_trigger = "heartbeat",
-		.gpio		= 3,
-	},
-	{
-		.name		= "h2:green",
-		.default_trigger = "cpu0",
-		.gpio		= OMAP_MPUIO(4),
-	},
-};
-
-static struct gpio_led_platform_data h2_gpio_led_data = {
-	.leds		= h2_gpio_led_pins,
-	.num_leds	= ARRAY_SIZE(h2_gpio_led_pins),
-};
-
-static struct platform_device h2_gpio_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &h2_gpio_led_data,
-	},
-};
-
-static struct platform_device *h2_devices[] __initdata = {
-	&h2_nor_device,
-	&h2_nand_device,
-	&h2_smc91x_device,
-	&h2_kp_device,
-	&h2_gpio_leds,
-};
-
-static void __init h2_init_smc91x(void)
-{
-	if (gpio_request(0, "SMC91x irq") < 0) {
-		printk("Error requesting gpio 0 for smc91x irq\n");
-		return;
-	}
-}
-
-static int tps_setup(struct i2c_client *client, void *context)
-{
-	if (!IS_BUILTIN(CONFIG_TPS65010))
-		return -ENOSYS;
-
-	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
-				TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
-
-	return 0;
-}
-
-static struct tps65010_board tps_board = {
-	.base		= H2_TPS_GPIO_BASE,
-	.outmask	= 0x0f,
-	.setup		= tps_setup,
-};
-
-static struct i2c_board_info __initdata h2_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("tps65010", 0x48),
-		.platform_data	= &tps_board,
-	}, {
-		.type = "isp1301_omap",
-		.addr = 0x2d,
-		.dev_name = "isp1301",
-	},
-};
-
-static struct gpiod_lookup_table isp1301_gpiod_table = {
-	.dev_id = "isp1301",
-	.table = {
-		/* Active low since the irq triggers on falling edge */
-		GPIO_LOOKUP(OMAP_GPIO_LABEL, 2,
-			    NULL, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct omap_usb_config h2_usb_config __initdata = {
-	/* usb1 has a Mini-AB port and external isp1301 transceiver */
-	.otg		= 2,
-
-#if IS_ENABLED(CONFIG_USB_OMAP)
-	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
-	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
-#elif	IS_ENABLED(CONFIG_USB_OHCI_HCD)
-	/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
-	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
-#endif
-
-	.pins[1]	= 3,
-};
-
-static const struct omap_lcd_config h2_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-
-static void __init h2_init(void)
-{
-	h2_init_smc91x();
-
-	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
-	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
-	 * notice whether a NAND chip is enabled at probe time.
-	 *
-	 * FIXME revC boards (and H3) support NAND-boot, with a dip switch to
-	 * put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3.  Try
-	 * detecting that in code here, to avoid probing every possible flash
-	 * configuration...
-	 */
-	h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
-	h2_nor_resource.end += SZ_32M - 1;
-
-	h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
-	h2_nand_resource.end += SZ_4K - 1;
-	BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
-	gpio_direction_input(H2_NAND_RB_GPIO_PIN);
-
-	gpiod_add_lookup_table(&isp1301_gpiod_table);
-
-	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
-	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
-	/* MMC:  card detect and WP */
-	/* omap_cfg_reg(U19_ARMIO1); */		/* CD */
-	omap_cfg_reg(BALLOUT_V8_ARMIO3);	/* WP */
-
-	/* Mux pins for keypad */
-	omap_cfg_reg(F18_1610_KBC0);
-	omap_cfg_reg(D20_1610_KBC1);
-	omap_cfg_reg(D19_1610_KBC2);
-	omap_cfg_reg(E18_1610_KBC3);
-	omap_cfg_reg(C21_1610_KBC4);
-	omap_cfg_reg(G18_1610_KBR0);
-	omap_cfg_reg(F19_1610_KBR1);
-	omap_cfg_reg(H14_1610_KBR2);
-	omap_cfg_reg(E20_1610_KBR3);
-	omap_cfg_reg(E19_1610_KBR4);
-	omap_cfg_reg(N19_1610_KBR5);
-
-	/* GPIO based LEDs */
-	omap_cfg_reg(P18_1610_GPIO3);
-	omap_cfg_reg(MPUIO4);
-
-	h2_smc91x_resources[1].start = gpio_to_irq(0);
-	h2_smc91x_resources[1].end = gpio_to_irq(0);
-	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
-	omap_serial_init();
-
-	/* ISP1301 IRQ wired at M14 */
-	omap_cfg_reg(M14_1510_GPIO2);
-	h2_i2c_board_info[0].irq = gpio_to_irq(58);
-	omap_register_i2c_bus(1, 100, h2_i2c_board_info,
-			      ARRAY_SIZE(h2_i2c_board_info));
-	omap1_usb_init(&h2_usb_config);
-	h2_mmc_init();
-
-	omapfb_set_lcd_config(&h2_lcd_config);
-}
-
-MACHINE_START(OMAP_H2, "TI-H2")
-	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
-	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= h2_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2.h b/arch/arm/mach-omap1/board-h2.h
deleted file mode 100644
index 315e2662547e..000000000000
--- a/arch/arm/mach-omap1/board-h2.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * arch/arm/mach-omap1/board-h2.h
- *
- * Hardware definitions for TI OMAP1610 H2 board.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_H2_H
-#define __ASM_ARCH_OMAP_H2_H
-
-#define H2_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-#	define H2_TPS_GPIO_MMC_PWR_EN	(H2_TPS_GPIO_BASE + 3)
-
-extern void h2_mmc_init(void);
-
-#endif /*  __ASM_ARCH_OMAP_H2_H */
-
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
deleted file mode 100644
index f595bd4f5024..000000000000
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-h3-mmc.c
- *
- * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
- * Author: Felipe Balbi <felipe.lima@indt.org.br>
- *
- * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is:
- * Copyright (C) 2006 Nokia Corporation
- */
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <linux/mfd/tps65010.h>
-
-#include "common.h"
-#include "board-h3.h"
-#include "mmc.h"
-
-#if IS_ENABLED(CONFIG_MMC_OMAP)
-
-static int mmc_set_power(struct device *dev, int slot, int power_on,
-				int vdd)
-{
-	gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on);
-	return 0;
-}
-
-/*
- * H3 could use the following functions tested:
- * - mmc_get_cover_state that uses OMAP_MPUIO(1)
- * - mmc_get_wp that maybe uses OMAP_MPUIO(3)
- */
-static struct omap_mmc_platform_data mmc1_data = {
-	.nr_slots                       = 1,
-	.slots[0]       = {
-		.set_power              = mmc_set_power,
-		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
-		.name                   = "mmcblk",
-	},
-};
-
-static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
-
-void __init h3_mmc_init(void)
-{
-	int ret;
-
-	ret = gpio_request(H3_TPS_GPIO_MMC_PWR_EN, "MMC power");
-	if (ret < 0)
-		return;
-	gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0);
-
-	mmc_data[0] = &mmc1_data;
-	omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC);
-}
-
-#else
-
-void __init h3_mmc_init(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
deleted file mode 100644
index 1e4c57710fcc..000000000000
--- a/arch/arm/mach-omap1/board-h3.c
+++ /dev/null
@@ -1,455 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-h3.c
- *
- * This file contains OMAP1710 H3 specific code.
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- * Copyright (C) 2002 MontaVista Software, Inc.
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *         Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
- */
-#include <linux/gpio.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/errno.h>
-#include <linux/workqueue.h>
-#include <linux/i2c.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/tps65010.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-#include <linux/platform_data/gpio-omap.h>
-#include <linux/platform_data/keypad-omap.h>
-#include <linux/omap-dma.h>
-#include <linux/leds.h>
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "tc.h"
-#include "mux.h"
-#include "flash.h"
-#include "hardware.h"
-#include "irqs.h"
-#include "usb.h"
-#include "common.h"
-#include "board-h3.h"
-
-/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
-#define OMAP1710_ETHR_START		0x04000300
-
-#define H3_TS_GPIO	48
-
-static const unsigned int h3_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_3),
-	KEY(3, 0, KEY_F10),
-	KEY(4, 0, KEY_F5),
-	KEY(5, 0, KEY_9),
-	KEY(0, 1, KEY_DOWN),
-	KEY(1, 1, KEY_UP),
-	KEY(2, 1, KEY_2),
-	KEY(3, 1, KEY_F9),
-	KEY(4, 1, KEY_F7),
-	KEY(5, 1, KEY_0),
-	KEY(0, 2, KEY_ENTER),
-	KEY(1, 2, KEY_6),
-	KEY(2, 2, KEY_1),
-	KEY(3, 2, KEY_F2),
-	KEY(4, 2, KEY_F6),
-	KEY(5, 2, KEY_HOME),
-	KEY(0, 3, KEY_8),
-	KEY(1, 3, KEY_5),
-	KEY(2, 3, KEY_F12),
-	KEY(3, 3, KEY_F3),
-	KEY(4, 3, KEY_F8),
-	KEY(5, 3, KEY_END),
-	KEY(0, 4, KEY_7),
-	KEY(1, 4, KEY_4),
-	KEY(2, 4, KEY_F11),
-	KEY(3, 4, KEY_F1),
-	KEY(4, 4, KEY_F4),
-	KEY(5, 4, KEY_ESC),
-	KEY(0, 5, KEY_F13),
-	KEY(1, 5, KEY_F14),
-	KEY(2, 5, KEY_F15),
-	KEY(3, 5, KEY_F16),
-	KEY(4, 5, KEY_SLEEP),
-};
-
-
-static struct mtd_partition nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* file system */
-	{
-	      .name		= "filesystem",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data nor_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= nor_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_partitions),
-};
-
-static struct resource nor_resource = {
-	/* This is on CS3, wherever it's mapped */
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nor_resource,
-};
-
-static struct mtd_partition nand_partitions[] = {
-#if 0
-	/* REVISIT: enable these partitions if you make NAND BOOT work */
-	{
-		.name		= "xloader",
-		.offset		= 0,
-		.size		= 64 * 1024,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "bootloader",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 256 * 1024,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 192 * 1024,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * SZ_1M,
-	},
-#endif
-	{
-		.name		= "filesystem",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	},
-};
-
-#define H3_NAND_RB_GPIO_PIN	10
-
-static int nand_dev_ready(struct nand_chip *chip)
-{
-	return gpio_get_value(H3_NAND_RB_GPIO_PIN);
-}
-
-static struct platform_nand_data nand_platdata = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.nr_partitions		= ARRAY_SIZE(nand_partitions),
-		.partitions		= nand_partitions,
-		.options		= NAND_SAMSUNG_LP_OPTIONS,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= omap1_nand_cmd_ctl,
-		.dev_ready	= nand_dev_ready,
-
-	},
-};
-
-static struct resource nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nand_device = {
-	.name		= "gen_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nand_platdata,
-	},
-	.num_resources	= 1,
-	.resource	= &nand_resource,
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= OMAP1710_ETHR_START,		/* Physical */
-		.end	= OMAP1710_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static void __init h3_init_smc91x(void)
-{
-	omap_cfg_reg(W15_1710_GPIO40);
-	if (gpio_request(40, "SMC91x irq") < 0) {
-		printk("Error requesting gpio 40 for smc91x irq\n");
-		return;
-	}
-}
-
-#define GPTIMER_BASE		0xFFFB1400
-#define GPTIMER_REGS(x)	(0xFFFB1400 + (x * 0x800))
-#define GPTIMER_REGS_SIZE	0x46
-
-static struct resource intlat_resources[] = {
-	[0] = {
-		.start  = GPTIMER_REGS(0),	      /* Physical */
-		.end    = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = INT_1610_GPTIMER1,
-		.end    = INT_1610_GPTIMER1,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device intlat_device = {
-	.name	   = "omap_intlat",
-	.id	     = 0,
-	.num_resources  = ARRAY_SIZE(intlat_resources),
-	.resource       = intlat_resources,
-};
-
-static struct resource h3_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data h3_keymap_data = {
-	.keymap		= h3_keymap,
-	.keymap_size	= ARRAY_SIZE(h3_keymap),
-};
-
-static struct omap_kp_platform_data h3_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &h3_keymap_data,
-	.rep		= true,
-	.delay		= 9,
-	.dbounce	= true,
-};
-
-static struct platform_device h3_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &h3_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(h3_kp_resources),
-	.resource	= h3_kp_resources,
-};
-
-static struct platform_device h3_lcd_device = {
-	.name		= "lcd_h3",
-	.id		= -1,
-};
-
-static struct spi_board_info h3_spi_board_info[] __initdata = {
-	[0] = {
-		.modalias	= "tsc2101",
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.max_speed_hz	= 16000000,
-		/* .platform_data	= &tsc_platform_data, */
-	},
-};
-
-static const struct gpio_led h3_gpio_led_pins[] = {
-	{
-		.name		= "h3:red",
-		.default_trigger = "heartbeat",
-		.gpio		= 3,
-	},
-	{
-		.name		= "h3:green",
-		.default_trigger = "cpu0",
-		.gpio		= OMAP_MPUIO(4),
-	},
-};
-
-static struct gpio_led_platform_data h3_gpio_led_data = {
-	.leds		= h3_gpio_led_pins,
-	.num_leds	= ARRAY_SIZE(h3_gpio_led_pins),
-};
-
-static struct platform_device h3_gpio_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &h3_gpio_led_data,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&nor_device,
-	&nand_device,
-        &smc91x_device,
-	&intlat_device,
-	&h3_kp_device,
-	&h3_lcd_device,
-	&h3_gpio_leds,
-};
-
-static struct omap_usb_config h3_usb_config __initdata = {
-	/* usb1 has a Mini-AB port and external isp1301 transceiver */
-	.otg	    = 2,
-
-#if IS_ENABLED(CONFIG_USB_OMAP)
-	.hmc_mode       = 19,   /* 0:host(off) 1:dev|otg 2:disabled */
-#elif IS_ENABLED(CONFIG_USB_OHCI_HCD)
-	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
-	.hmc_mode       = 20,   /* 1:dev|otg(off) 1:host 2:disabled */
-#endif
-
-	.pins[1]	= 3,
-};
-
-static const struct omap_lcd_config h3_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-
-static struct i2c_board_info __initdata h3_i2c_board_info[] = {
-       {
-		I2C_BOARD_INFO("tps65013", 0x48),
-       },
-	{
-		I2C_BOARD_INFO("isp1301_omap", 0x2d),
-	},
-};
-
-static void __init h3_init(void)
-{
-	h3_init_smc91x();
-
-	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
-	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
-	 * notice whether a NAND chip is enabled at probe time.
-	 *
-	 * H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND
-	 * (which on H2 may be 16bit) on CS3.  Try detecting that in code here,
-	 * to avoid probing every possible flash configuration...
-	 */
-	nor_resource.end = nor_resource.start = omap_cs3_phys();
-	nor_resource.end += SZ_32M - 1;
-
-	nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS;
-	nand_resource.end += SZ_4K - 1;
-	BUG_ON(gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0);
-	gpio_direction_input(H3_NAND_RB_GPIO_PIN);
-
-	/* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
-	/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
-	omap_cfg_reg(V2_1710_GPIO10);
-
-	/* Mux pins for keypad */
-	omap_cfg_reg(F18_1610_KBC0);
-	omap_cfg_reg(D20_1610_KBC1);
-	omap_cfg_reg(D19_1610_KBC2);
-	omap_cfg_reg(E18_1610_KBC3);
-	omap_cfg_reg(C21_1610_KBC4);
-	omap_cfg_reg(G18_1610_KBR0);
-	omap_cfg_reg(F19_1610_KBR1);
-	omap_cfg_reg(H14_1610_KBR2);
-	omap_cfg_reg(E20_1610_KBR3);
-	omap_cfg_reg(E19_1610_KBR4);
-	omap_cfg_reg(N19_1610_KBR5);
-
-	/* GPIO based LEDs */
-	omap_cfg_reg(P18_1610_GPIO3);
-	omap_cfg_reg(MPUIO4);
-
-	smc91x_resources[1].start = gpio_to_irq(40);
-	smc91x_resources[1].end = gpio_to_irq(40);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO);
-	spi_register_board_info(h3_spi_board_info,
-				ARRAY_SIZE(h3_spi_board_info));
-	omap_serial_init();
-	h3_i2c_board_info[1].irq = gpio_to_irq(14);
-	omap_register_i2c_bus(1, 100, h3_i2c_board_info,
-			      ARRAY_SIZE(h3_i2c_board_info));
-	omap1_usb_init(&h3_usb_config);
-	h3_mmc_init();
-
-	omapfb_set_lcd_config(&h3_lcd_config);
-}
-
-MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
-	/* Maintainer: Texas Instruments, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= h3_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h3.h b/arch/arm/mach-omap1/board-h3.h
deleted file mode 100644
index 78de535be3c5..000000000000
--- a/arch/arm/mach-omap1/board-h3.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-omap1/board-h3.h
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_H3_H
-#define __ASM_ARCH_OMAP_H3_H
-
-#define H3_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-#	define H3_TPS_GPIO_MMC_PWR_EN	(H3_TPS_GPIO_BASE + 4)
-
-extern void h3_mmc_init(void);
-
-#endif /*  __ASM_ARCH_OMAP_H3_H */
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
deleted file mode 100644
index ec049cee49c6..000000000000
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ /dev/null
@@ -1,594 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * HTC Herald board configuration
- * Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
- * Copyright (C) 2009 Wing Linux
- *
- * Based on the board-htcwizard.c file from the linwizard project:
- * Copyright (C) 2006 Unai Uribarri
- * Copyright (C) 2008 linwizard.sourceforge.net
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-gpio.h>
-#include <linux/htcpld.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/omapfb.h>
-#include <linux/platform_data/keypad-omap.h>
-#include <linux/soc/ti/omap1-io.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "hardware.h"
-#include "omap7xx.h"
-#include "mmc.h"
-#include "irqs.h"
-#include "usb.h"
-#include "common.h"
-
-/* LCD register definition */
-#define       OMAP_LCDC_CONTROL               (0xfffec000 + 0x00)
-#define       OMAP_LCDC_STATUS                (0xfffec000 + 0x10)
-#define       OMAP_DMA_LCD_CCR                (0xfffee300 + 0xc2)
-#define       OMAP_DMA_LCD_CTRL               (0xfffee300 + 0xc4)
-#define       OMAP_LCDC_CTRL_LCD_EN           (1 << 0)
-#define       OMAP_LCDC_STAT_DONE             (1 << 0)
-
-/* GPIO definitions for the power button and keyboard slide switch */
-#define HTCHERALD_GPIO_POWER 139
-#define HTCHERALD_GPIO_SLIDE 174
-#define HTCHERALD_GIRQ_BTNS 141
-
-/* GPIO definitions for the touchscreen */
-#define HTCHERALD_GPIO_TS 76
-
-/* HTCPLD definitions */
-
-/*
- * CPLD Logic
- *
- * Chip 3 - 0x03
- *
- * Function            7 6 5 4  3 2 1 0
- * ------------------------------------
- * DPAD light          x x x x  x x x 1
- * SoundDev            x x x x  1 x x x
- * Screen white        1 x x x  x x x x
- * MMC power on        x x x x  x 1 x x
- * Happy times (n)     0 x x x  x 1 x x
- *
- * Chip 4 - 0x04
- *
- * Function            7 6 5 4  3 2 1 0
- * ------------------------------------
- * Keyboard light      x x x x  x x x 1
- * LCD Bright (4)      x x x x  x 1 1 x
- * LCD Bright (3)      x x x x  x 0 1 x
- * LCD Bright (2)      x x x x  x 1 0 x
- * LCD Bright (1)      x x x x  x 0 0 x
- * LCD Off             x x x x  0 x x x
- * LCD image (fb)      1 x x x  x x x x
- * LCD image (white)   0 x x x  x x x x
- * Caps lock LED       x x 1 x  x x x x
- *
- * Chip 5 - 0x05
- *
- * Function            7 6 5 4  3 2 1 0
- * ------------------------------------
- * Red (solid)         x x x x  x 1 x x
- * Red (flash)         x x x x  x x 1 x
- * Green (GSM flash)   x x x x  1 x x x
- * Green (GSM solid)   x x x 1  x x x x
- * Green (wifi flash)  x x 1 x  x x x x
- * Blue (bt flash)     x 1 x x  x x x x
- * DPAD Int Enable     1 x x x  x x x 0
- *
- * (Combinations of the above can be made for different colors.)
- * The direction pad interrupt enable must be set each time the
- * interrupt is handled.
- *
- * Chip 6 - 0x06
- *
- * Function            7 6 5 4  3 2 1 0
- * ------------------------------------
- * Vibrator            x x x x  1 x x x
- * Alt LED             x x x 1  x x x x
- * Screen white        1 x x x  x x x x
- * Screen white        x x 1 x  x x x x
- * Screen white        x 0 x x  x x x x
- * Enable kbd dpad     x x x x  x x 0 x
- * Happy Times         0 1 0 x  x x 0 x
- */
-
-/*
- * HTCPLD GPIO lines start 16 after OMAP_MAX_GPIO_LINES to account
- * for the 16 MPUIO lines.
- */
-#define HTCPLD_GPIO_START_OFFSET	(OMAP_MAX_GPIO_LINES + 16)
-#define HTCPLD_IRQ(chip, offset)	(OMAP_IRQ_END + 8 * (chip) + (offset))
-#define HTCPLD_BASE(chip, offset)	\
-	(HTCPLD_GPIO_START_OFFSET + 8 * (chip) + (offset))
-
-#define HTCPLD_GPIO_LED_DPAD		HTCPLD_BASE(0, 0)
-#define HTCPLD_GPIO_LED_KBD		HTCPLD_BASE(1, 0)
-#define HTCPLD_GPIO_LED_CAPS		HTCPLD_BASE(1, 5)
-#define HTCPLD_GPIO_LED_RED_FLASH	HTCPLD_BASE(2, 1)
-#define HTCPLD_GPIO_LED_RED_SOLID	HTCPLD_BASE(2, 2)
-#define HTCPLD_GPIO_LED_GREEN_FLASH	HTCPLD_BASE(2, 3)
-#define HTCPLD_GPIO_LED_GREEN_SOLID	HTCPLD_BASE(2, 4)
-#define HTCPLD_GPIO_LED_WIFI		HTCPLD_BASE(2, 5)
-#define HTCPLD_GPIO_LED_BT		HTCPLD_BASE(2, 6)
-#define HTCPLD_GPIO_LED_VIBRATE		HTCPLD_BASE(3, 3)
-#define HTCPLD_GPIO_LED_ALT		HTCPLD_BASE(3, 4)
-
-#define HTCPLD_GPIO_RIGHT_KBD		HTCPLD_BASE(6, 7)
-#define HTCPLD_GPIO_UP_KBD		HTCPLD_BASE(6, 6)
-#define HTCPLD_GPIO_LEFT_KBD		HTCPLD_BASE(6, 5)
-#define HTCPLD_GPIO_DOWN_KBD		HTCPLD_BASE(6, 4)
-
-#define HTCPLD_GPIO_RIGHT_DPAD		HTCPLD_BASE(7, 7)
-#define HTCPLD_GPIO_UP_DPAD		HTCPLD_BASE(7, 6)
-#define HTCPLD_GPIO_LEFT_DPAD		HTCPLD_BASE(7, 5)
-#define HTCPLD_GPIO_DOWN_DPAD		HTCPLD_BASE(7, 4)
-#define HTCPLD_GPIO_ENTER_DPAD		HTCPLD_BASE(7, 3)
-
-/*
- * The htcpld chip requires a gpio write to a specific line
- * to re-enable interrupts after one has occurred.
- */
-#define HTCPLD_GPIO_INT_RESET_HI	HTCPLD_BASE(2, 7)
-#define HTCPLD_GPIO_INT_RESET_LO	HTCPLD_BASE(2, 0)
-
-/* Chip 5 */
-#define HTCPLD_IRQ_RIGHT_KBD		HTCPLD_IRQ(0, 7)
-#define HTCPLD_IRQ_UP_KBD		HTCPLD_IRQ(0, 6)
-#define HTCPLD_IRQ_LEFT_KBD		HTCPLD_IRQ(0, 5)
-#define HTCPLD_IRQ_DOWN_KBD		HTCPLD_IRQ(0, 4)
-
-/* Chip 6 */
-#define HTCPLD_IRQ_RIGHT_DPAD		HTCPLD_IRQ(1, 7)
-#define HTCPLD_IRQ_UP_DPAD		HTCPLD_IRQ(1, 6)
-#define HTCPLD_IRQ_LEFT_DPAD		HTCPLD_IRQ(1, 5)
-#define HTCPLD_IRQ_DOWN_DPAD		HTCPLD_IRQ(1, 4)
-#define HTCPLD_IRQ_ENTER_DPAD		HTCPLD_IRQ(1, 3)
-
-/* Keyboard definition */
-
-static const unsigned int htc_herald_keymap[] = {
-	KEY(0, 0, KEY_RECORD), /* Mail button */
-	KEY(1, 0, KEY_CAMERA), /* Camera */
-	KEY(2, 0, KEY_PHONE), /* Send key */
-	KEY(3, 0, KEY_VOLUMEUP), /* Volume up */
-	KEY(4, 0, KEY_F2),  /* Right bar (landscape) */
-	KEY(5, 0, KEY_MAIL), /* Win key (portrait) */
-	KEY(6, 0, KEY_DIRECTORY), /* Right bar (portrait) */
-	KEY(0, 1, KEY_LEFTCTRL), /* Windows key */
-	KEY(1, 1, KEY_COMMA),
-	KEY(2, 1, KEY_M),
-	KEY(3, 1, KEY_K),
-	KEY(4, 1, KEY_SLASH), /* OK key */
-	KEY(5, 1, KEY_I),
-	KEY(6, 1, KEY_U),
-	KEY(0, 2, KEY_LEFTALT),
-	KEY(1, 2, KEY_TAB),
-	KEY(2, 2, KEY_N),
-	KEY(3, 2, KEY_J),
-	KEY(4, 2, KEY_ENTER),
-	KEY(5, 2, KEY_H),
-	KEY(6, 2, KEY_Y),
-	KEY(0, 3, KEY_SPACE),
-	KEY(1, 3, KEY_L),
-	KEY(2, 3, KEY_B),
-	KEY(3, 3, KEY_V),
-	KEY(4, 3, KEY_BACKSPACE),
-	KEY(5, 3, KEY_G),
-	KEY(6, 3, KEY_T),
-	KEY(0, 4, KEY_CAPSLOCK), /* Shift */
-	KEY(1, 4, KEY_C),
-	KEY(2, 4, KEY_F),
-	KEY(3, 4, KEY_R),
-	KEY(4, 4, KEY_O),
-	KEY(5, 4, KEY_E),
-	KEY(6, 4, KEY_D),
-	KEY(0, 5, KEY_X),
-	KEY(1, 5, KEY_Z),
-	KEY(2, 5, KEY_S),
-	KEY(3, 5, KEY_W),
-	KEY(4, 5, KEY_P),
-	KEY(5, 5, KEY_Q),
-	KEY(6, 5, KEY_A),
-	KEY(0, 6, KEY_CONNECT), /* Voice button */
-	KEY(2, 6, KEY_CANCEL), /* End key */
-	KEY(3, 6, KEY_VOLUMEDOWN), /* Volume down */
-	KEY(4, 6, KEY_F1), /* Left bar (landscape) */
-	KEY(5, 6, KEY_WWW), /* OK button (portrait) */
-	KEY(6, 6, KEY_CALENDAR), /* Left bar (portrait) */
-};
-
-static const struct matrix_keymap_data htc_herald_keymap_data = {
-	.keymap		= htc_herald_keymap,
-	.keymap_size	= ARRAY_SIZE(htc_herald_keymap),
-};
-
-static struct omap_kp_platform_data htcherald_kp_data = {
-	.rows	= 7,
-	.cols	= 7,
-	.delay = 20,
-	.rep = true,
-	.keymap_data = &htc_herald_keymap_data,
-};
-
-static struct resource kp_resources[] = {
-	[0] = {
-		.start	= INT_7XX_MPUIO_KEYPAD,
-		.end	= INT_7XX_MPUIO_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &htcherald_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(kp_resources),
-	.resource	= kp_resources,
-};
-
-/* GPIO buttons for keyboard slide and power button */
-static struct gpio_keys_button herald_gpio_keys_table[] = {
-	{BTN_0,  HTCHERALD_GPIO_POWER, 1, "POWER", EV_KEY, 1, 20},
-	{SW_LID, HTCHERALD_GPIO_SLIDE, 0, "SLIDE", EV_SW,  1, 20},
-
-	{KEY_LEFT,  HTCPLD_GPIO_LEFT_KBD,  1, "LEFT",  EV_KEY, 1, 20},
-	{KEY_RIGHT, HTCPLD_GPIO_RIGHT_KBD, 1, "RIGHT", EV_KEY, 1, 20},
-	{KEY_UP,    HTCPLD_GPIO_UP_KBD,    1, "UP",    EV_KEY, 1, 20},
-	{KEY_DOWN,  HTCPLD_GPIO_DOWN_KBD,  1, "DOWN",  EV_KEY, 1, 20},
-
-	{KEY_LEFT,  HTCPLD_GPIO_LEFT_DPAD,   1, "DLEFT",  EV_KEY, 1, 20},
-	{KEY_RIGHT, HTCPLD_GPIO_RIGHT_DPAD,  1, "DRIGHT", EV_KEY, 1, 20},
-	{KEY_UP,    HTCPLD_GPIO_UP_DPAD,     1, "DUP",    EV_KEY, 1, 20},
-	{KEY_DOWN,  HTCPLD_GPIO_DOWN_DPAD,   1, "DDOWN",  EV_KEY, 1, 20},
-	{KEY_ENTER, HTCPLD_GPIO_ENTER_DPAD,  1, "DENTER", EV_KEY, 1, 20},
-};
-
-static struct gpio_keys_platform_data herald_gpio_keys_data = {
-	.buttons	= herald_gpio_keys_table,
-	.nbuttons	= ARRAY_SIZE(herald_gpio_keys_table),
-	.rep		= true,
-};
-
-static struct platform_device herald_gpiokeys_device = {
-	.name      = "gpio-keys",
-	.id		= -1,
-	.dev = {
-		.platform_data = &herald_gpio_keys_data,
-	},
-};
-
-/* LEDs for the Herald.  These connect to the HTCPLD GPIO device. */
-static const struct gpio_led gpio_leds[] = {
-	{"dpad",        NULL, HTCPLD_GPIO_LED_DPAD,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"kbd",         NULL, HTCPLD_GPIO_LED_KBD,         0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"vibrate",     NULL, HTCPLD_GPIO_LED_VIBRATE,     0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"green_solid", NULL, HTCPLD_GPIO_LED_GREEN_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"green_flash", NULL, HTCPLD_GPIO_LED_GREEN_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"red_solid",   "mmc0", HTCPLD_GPIO_LED_RED_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"red_flash",   NULL, HTCPLD_GPIO_LED_RED_FLASH,   0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"wifi",        NULL, HTCPLD_GPIO_LED_WIFI,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"bt",          NULL, HTCPLD_GPIO_LED_BT,          0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"caps",        NULL, HTCPLD_GPIO_LED_CAPS,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"alt",         NULL, HTCPLD_GPIO_LED_ALT,         0, 0, LEDS_GPIO_DEFSTATE_OFF},
-};
-
-static struct gpio_led_platform_data gpio_leds_data = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device gpio_leds_device = {
-	.name		= "leds-gpio",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &gpio_leds_data,
-	},
-};
-
-/* HTC PLD chips */
-
-static struct resource htcpld_resources[] = {
-	[0] = {
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct htcpld_chip_platform_data htcpld_chips[] = {
-	[0] = {
-		.addr		= 0x03,
-		.reset		= 0x04,
-		.num_gpios	= 8,
-		.gpio_out_base	= HTCPLD_BASE(0, 0),
-		.gpio_in_base	= HTCPLD_BASE(4, 0),
-	},
-	[1] = {
-		.addr		= 0x04,
-		.reset		= 0x8e,
-		.num_gpios	= 8,
-		.gpio_out_base	= HTCPLD_BASE(1, 0),
-		.gpio_in_base	= HTCPLD_BASE(5, 0),
-	},
-	[2] = {
-		.addr		= 0x05,
-		.reset		= 0x80,
-		.num_gpios	= 8,
-		.gpio_out_base	= HTCPLD_BASE(2, 0),
-		.gpio_in_base	= HTCPLD_BASE(6, 0),
-		.irq_base	= HTCPLD_IRQ(0, 0),
-		.num_irqs	= 8,
-	},
-	[3] = {
-		.addr		= 0x06,
-		.reset		= 0x40,
-		.num_gpios	= 8,
-		.gpio_out_base	= HTCPLD_BASE(3, 0),
-		.gpio_in_base	= HTCPLD_BASE(7, 0),
-		.irq_base	= HTCPLD_IRQ(1, 0),
-		.num_irqs	= 8,
-	},
-};
-
-static struct htcpld_core_platform_data htcpld_pfdata = {
-	.int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI,
-	.int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO,
-	.i2c_adapter_id	   = 1,
-
-	.chip		   = htcpld_chips,
-	.num_chip	   = ARRAY_SIZE(htcpld_chips),
-};
-
-static struct platform_device htcpld_device = {
-	.name		= "i2c-htcpld",
-	.id		= -1,
-	.resource	= htcpld_resources,
-	.num_resources	= ARRAY_SIZE(htcpld_resources),
-	.dev	= {
-		.platform_data	= &htcpld_pfdata,
-	},
-};
-
-/* USB Device */
-static struct omap_usb_config htcherald_usb_config __initdata = {
-	.otg = 0,
-	.register_host = 0,
-	.register_dev  = 1,
-	.hmc_mode = 4,
-	.pins[0] = 2,
-};
-
-/* LCD Device resources */
-static const struct omap_lcd_config htcherald_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-
-static struct platform_device lcd_device = {
-	.name           = "lcd_htcherald",
-	.id             = -1,
-};
-
-/* MMC Card */
-#if IS_ENABLED(CONFIG_MMC_OMAP)
-static struct omap_mmc_platform_data htc_mmc1_data = {
-	.nr_slots                       = 1,
-	.switch_slot                    = NULL,
-	.slots[0]       = {
-		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
-		.name                   = "mmcblk",
-		.nomux                  = 1,
-		.wires                  = 4,
-		.switch_pin             = -1,
-	},
-};
-
-static struct omap_mmc_platform_data *htc_mmc_data[1];
-#endif
-
-
-/* Platform devices for the Herald */
-static struct platform_device *devices[] __initdata = {
-	&kp_device,
-	&lcd_device,
-	&htcpld_device,
-	&gpio_leds_device,
-	&herald_gpiokeys_device,
-};
-
-/*
- * Touchscreen
- */
-static const struct ads7846_platform_data htcherald_ts_platform_data = {
-	.model			= 7846,
-	.keep_vref_on		= 1,
-	.x_plate_ohms		= 496,
-	.gpio_pendown		= HTCHERALD_GPIO_TS,
-	.pressure_max		= 10000,
-	.pressure_min		= 5000,
-	.x_min			= 528,
-	.x_max			= 3760,
-	.y_min			= 624,
-	.y_max			= 3760,
-};
-
-static struct spi_board_info __initdata htcherald_spi_board_info[] = {
-	{
-		.modalias		= "ads7846",
-		.platform_data		= &htcherald_ts_platform_data,
-		.max_speed_hz		= 2500000,
-		.bus_num		= 2,
-		.chip_select		= 1,
-	}
-};
-
-/*
- * Init functions from here on
- */
-
-static void __init htcherald_lcd_init(void)
-{
-	u32 reg;
-	unsigned int tries = 200;
-
-	/* disable controller if active */
-	reg = omap_readl(OMAP_LCDC_CONTROL);
-	if (reg & OMAP_LCDC_CTRL_LCD_EN) {
-		reg &= ~OMAP_LCDC_CTRL_LCD_EN;
-		omap_writel(reg, OMAP_LCDC_CONTROL);
-
-		/* wait for end of frame */
-		while (!(omap_readl(OMAP_LCDC_STATUS) & OMAP_LCDC_STAT_DONE)) {
-			tries--;
-			if (!tries)
-				break;
-		}
-		if (!tries)
-			pr_err("Timeout waiting for end of frame -- LCD may not be available\n");
-
-		/* turn off DMA */
-		reg = omap_readw(OMAP_DMA_LCD_CCR);
-		reg &= ~(1 << 7);
-		omap_writew(reg, OMAP_DMA_LCD_CCR);
-
-		reg = omap_readw(OMAP_DMA_LCD_CTRL);
-		reg &= ~(1 << 8);
-		omap_writew(reg, OMAP_DMA_LCD_CTRL);
-	}
-}
-
-static void __init htcherald_map_io(void)
-{
-	omap7xx_map_io();
-
-	/*
-	 * The LCD panel must be disabled and DMA turned off here, as doing
-	 * it later causes the LCD never to reinitialize.
-	 */
-	htcherald_lcd_init();
-
-	printk(KERN_INFO "htcherald_map_io done.\n");
-}
-
-static void __init htcherald_disable_watchdog(void)
-{
-	/* Disable watchdog if running */
-	if (omap_readl(OMAP_WDT_TIMER_MODE) & 0x8000) {
-		/*
-		 * disable a potentially running watchdog timer before
-		 * it kills us.
-		 */
-		printk(KERN_WARNING "OMAP850 Watchdog seems to be activated, disabling it for now.\n");
-		omap_writel(0xF5, OMAP_WDT_TIMER_MODE);
-		omap_writel(0xA0, OMAP_WDT_TIMER_MODE);
-	}
-}
-
-#define HTCHERALD_GPIO_USB_EN1 33
-#define HTCHERALD_GPIO_USB_EN2 73
-#define HTCHERALD_GPIO_USB_DM  35
-#define HTCHERALD_GPIO_USB_DP  36
-
-static void __init htcherald_usb_enable(void)
-{
-	unsigned int tries = 20;
-	unsigned int value = 0;
-
-	/* Request the GPIOs we need to control here */
-	if (gpio_request(HTCHERALD_GPIO_USB_EN1, "herald_usb") < 0)
-		goto err1;
-
-	if (gpio_request(HTCHERALD_GPIO_USB_EN2, "herald_usb") < 0)
-		goto err2;
-
-	if (gpio_request(HTCHERALD_GPIO_USB_DM, "herald_usb") < 0)
-		goto err3;
-
-	if (gpio_request(HTCHERALD_GPIO_USB_DP, "herald_usb") < 0)
-		goto err4;
-
-	/* force USB_EN GPIO to 0 */
-	do {
-		/* output low */
-		gpio_direction_output(HTCHERALD_GPIO_USB_EN1, 0);
-	} while ((value = gpio_get_value(HTCHERALD_GPIO_USB_EN1)) == 1 &&
-			--tries);
-
-	if (value == 1)
-		printk(KERN_WARNING "Unable to reset USB, trying to continue\n");
-
-	gpio_direction_output(HTCHERALD_GPIO_USB_EN2, 0); /* output low */
-	gpio_direction_input(HTCHERALD_GPIO_USB_DM); /* input */
-	gpio_direction_input(HTCHERALD_GPIO_USB_DP); /* input */
-
-	goto done;
-
-err4:
-	gpio_free(HTCHERALD_GPIO_USB_DM);
-err3:
-	gpio_free(HTCHERALD_GPIO_USB_EN2);
-err2:
-	gpio_free(HTCHERALD_GPIO_USB_EN1);
-err1:
-	printk(KERN_ERR "Unabled to request GPIO for USB\n");
-done:
-	printk(KERN_INFO "USB setup complete.\n");
-}
-
-static void __init htcherald_init(void)
-{
-	printk(KERN_INFO "HTC Herald init.\n");
-
-	/* Do board initialization before we register all the devices */
-	htcpld_resources[0].start = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
-	htcpld_resources[0].end = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	htcherald_disable_watchdog();
-
-	htcherald_usb_enable();
-	omap1_usb_init(&htcherald_usb_config);
-
-	htcherald_spi_board_info[0].irq = gpio_to_irq(HTCHERALD_GPIO_TS);
-	spi_register_board_info(htcherald_spi_board_info,
-		ARRAY_SIZE(htcherald_spi_board_info));
-
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-#if IS_ENABLED(CONFIG_MMC_OMAP)
-	htc_mmc_data[0] = &htc_mmc1_data;
-	omap1_init_mmc(htc_mmc_data, 1);
-#endif
-
-	omapfb_set_lcd_config(&htcherald_lcd_config);
-}
-
-MACHINE_START(HERALD, "HTC Herald")
-	/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
-	/* Maintainer: wing-linux.sourceforge.net */
-	.atag_offset    = 0x100,
-	.map_io         = htcherald_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq       = omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine   = htcherald_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
deleted file mode 100644
index 6deb4ca079e9..000000000000
--- a/arch/arm/mach-omap1/board-innovator.c
+++ /dev/null
@@ -1,481 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-innovator.c
- *
- * Board specific inits for OMAP-1510 and OMAP-1610 Innovator
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "tc.h"
-#include "mux.h"
-#include "flash.h"
-#include "hardware.h"
-#include "usb.h"
-#include "iomap.h"
-#include "common.h"
-#include "mmc.h"
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define INNOVATOR1610_ETHR_START	0x04000300
-
-static const unsigned int innovator_keymap[] = {
-	KEY(0, 0, KEY_F1),
-	KEY(3, 0, KEY_DOWN),
-	KEY(1, 1, KEY_F2),
-	KEY(2, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_F3),
-	KEY(1, 2, KEY_F4),
-	KEY(2, 2, KEY_UP),
-	KEY(2, 3, KEY_ENTER),
-	KEY(3, 3, KEY_LEFT),
-};
-
-static struct mtd_partition innovator_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* rest of flash1 is a file system */
-	{
-	      .name		= "rootfs",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_16M - SZ_2M - 2 * SZ_128K,
-	      .mask_flags	= 0
-	},
-	/* file system */
-	{
-	      .name		= "filesystem",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data innovator_flash_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= innovator_partitions,
-	.nr_parts	= ARRAY_SIZE(innovator_partitions),
-};
-
-static struct resource innovator_flash_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device innovator_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &innovator_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &innovator_flash_resource,
-};
-
-static struct resource innovator_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data innovator_keymap_data = {
-	.keymap		= innovator_keymap,
-	.keymap_size	= ARRAY_SIZE(innovator_keymap),
-};
-
-static struct omap_kp_platform_data innovator_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &innovator_keymap_data,
-	.delay		= 4,
-};
-
-static struct platform_device innovator_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &innovator_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(innovator_kp_resources),
-	.resource	= innovator_kp_resources,
-};
-
-static struct smc91x_platdata innovator_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-#ifdef CONFIG_ARCH_OMAP15XX
-
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc innovator1510_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP1510_FPGA_BASE,
-		.pfn		= __phys_to_pfn(OMAP1510_FPGA_START),
-		.length		= OMAP1510_FPGA_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static struct resource innovator1510_smc91x_resources[] = {
-	[0] = {
-		.start	= OMAP1510_FPGA_ETHR_START,	/* Physical */
-		.end	= OMAP1510_FPGA_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= OMAP1510_INT_ETHER,
-		.end	= OMAP1510_INT_ETHER,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device innovator1510_smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &innovator_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(innovator1510_smc91x_resources),
-	.resource	= innovator1510_smc91x_resources,
-};
-
-static struct platform_device innovator1510_lcd_device = {
-	.name		= "lcd_inn1510",
-	.id		= -1,
-	.dev	= {
-		.platform_data = (void __force *)OMAP1510_FPGA_LCD_PANEL_CONTROL,
-	}
-};
-
-static struct platform_device innovator1510_spi_device = {
-	.name		= "spi_inn1510",
-	.id		= -1,
-};
-
-static struct platform_device *innovator1510_devices[] __initdata = {
-	&innovator_flash_device,
-	&innovator1510_smc91x_device,
-	&innovator_kp_device,
-	&innovator1510_lcd_device,
-	&innovator1510_spi_device,
-};
-
-static int innovator_get_pendown_state(void)
-{
-	return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
-}
-
-static const struct ads7846_platform_data innovator1510_ts_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.get_pendown_state	= innovator_get_pendown_state,
-};
-
-static struct spi_board_info __initdata innovator1510_boardinfo[] = { {
-	/* FPGA (bus "10") CS0 has an ads7846e */
-	.modalias		= "ads7846",
-	.platform_data		= &innovator1510_ts_info,
-	.irq			= OMAP1510_INT_FPGA_TS,
-	.max_speed_hz		= 120000 /* max sample rate at 3V */
-					* 26 /* command + data + overhead */,
-	.bus_num		= 10,
-	.chip_select		= 0,
-} };
-
-#endif /* CONFIG_ARCH_OMAP15XX */
-
-#ifdef CONFIG_ARCH_OMAP16XX
-
-static struct resource innovator1610_smc91x_resources[] = {
-	[0] = {
-		.start	= INNOVATOR1610_ETHR_START,		/* Physical */
-		.end	= INNOVATOR1610_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device innovator1610_smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &innovator_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(innovator1610_smc91x_resources),
-	.resource	= innovator1610_smc91x_resources,
-};
-
-static struct platform_device innovator1610_lcd_device = {
-	.name		= "inn1610_lcd",
-	.id		= -1,
-};
-
-static struct platform_device *innovator1610_devices[] __initdata = {
-	&innovator_flash_device,
-	&innovator1610_smc91x_device,
-	&innovator_kp_device,
-	&innovator1610_lcd_device,
-};
-
-#endif /* CONFIG_ARCH_OMAP16XX */
-
-static void __init innovator_init_smc91x(void)
-{
-	if (cpu_is_omap1510()) {
-		__raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1,
-			   OMAP1510_FPGA_RST);
-		udelay(750);
-	} else {
-		if (gpio_request(0, "SMC91x irq") < 0) {
-			printk("Error requesting gpio 0 for smc91x irq\n");
-			return;
-		}
-	}
-}
-
-#ifdef CONFIG_ARCH_OMAP15XX
-/*
- * Board specific gang-switched transceiver power on/off.
- */
-static int innovator_omap_ohci_transceiver_power(int on)
-{
-	if (on)
-		__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
-				| ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
-			       INNOVATOR_FPGA_CAM_USB_CONTROL);
-	else
-		__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
-				& ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
-			       INNOVATOR_FPGA_CAM_USB_CONTROL);
-
-	return 0;
-}
-
-static struct omap_usb_config innovator1510_usb_config __initdata = {
-	/* for bundled non-standard host and peripheral cables */
-	.hmc_mode	= 4,
-
-	.register_host	= 1,
-	.pins[1]	= 6,
-	.pins[2]	= 6,		/* Conflicts with UART2 */
-
-	.register_dev	= 1,
-	.pins[0]	= 2,
-
-	.transceiver_power = innovator_omap_ohci_transceiver_power,
-};
-
-static const struct omap_lcd_config innovator1510_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP16XX
-static struct omap_usb_config h2_usb_config __initdata = {
-	/* usb1 has a Mini-AB port and external isp1301 transceiver */
-	.otg		= 2,
-
-#if IS_ENABLED(CONFIG_USB_OMAP)
-	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
-	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
-#elif	IS_ENABLED(CONFIG_USB_OHCI_HCD)
-	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
-	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
-#endif
-
-	.pins[1]	= 3,
-};
-
-static const struct omap_lcd_config innovator1610_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MMC_OMAP)
-
-static int mmc_set_power(struct device *dev, int slot, int power_on,
-				int vdd)
-{
-	if (power_on)
-		__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3),
-				OMAP1510_FPGA_POWER);
-	else
-		__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3),
-				OMAP1510_FPGA_POWER);
-
-	return 0;
-}
-
-/*
- * Innovator could use the following functions tested:
- * - mmc_get_wp that uses OMAP_MPUIO(3)
- * - mmc_get_cover_state that uses FPGA F4 UIO43
- */
-static struct omap_mmc_platform_data mmc1_data = {
-	.nr_slots                       = 1,
-	.slots[0]       = {
-		.set_power		= mmc_set_power,
-		.wires			= 4,
-		.name                   = "mmcblk",
-	},
-};
-
-static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
-
-static void __init innovator_mmc_init(void)
-{
-	mmc_data[0] = &mmc1_data;
-	omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC);
-}
-
-#else
-static inline void innovator_mmc_init(void)
-{
-}
-#endif
-
-static void __init innovator_init(void)
-{
-	if (cpu_is_omap1510())
-		omap1510_fpga_init_irq();
-	innovator_init_smc91x();
-
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap1510()) {
-		unsigned char reg;
-
-		/* mux pins for uarts */
-		omap_cfg_reg(UART1_TX);
-		omap_cfg_reg(UART1_RTS);
-		omap_cfg_reg(UART2_TX);
-		omap_cfg_reg(UART2_RTS);
-		omap_cfg_reg(UART3_TX);
-		omap_cfg_reg(UART3_RX);
-
-		reg = __raw_readb(OMAP1510_FPGA_POWER);
-		reg |= OMAP1510_FPGA_PCR_COM1_EN;
-		__raw_writeb(reg, OMAP1510_FPGA_POWER);
-		udelay(10);
-
-		reg = __raw_readb(OMAP1510_FPGA_POWER);
-		reg |= OMAP1510_FPGA_PCR_COM2_EN;
-		__raw_writeb(reg, OMAP1510_FPGA_POWER);
-		udelay(10);
-
-		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
-		spi_register_board_info(innovator1510_boardinfo,
-				ARRAY_SIZE(innovator1510_boardinfo));
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	if (!cpu_is_omap1510()) {
-		innovator1610_smc91x_resources[1].start = gpio_to_irq(0);
-		innovator1610_smc91x_resources[1].end = gpio_to_irq(0);
-		platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
-	}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap1510()) {
-		omap1_usb_init(&innovator1510_usb_config);
-		omapfb_set_lcd_config(&innovator1510_lcd_config);
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	if (cpu_is_omap1610()) {
-		omap1_usb_init(&h2_usb_config);
-		omapfb_set_lcd_config(&innovator1610_lcd_config);
-	}
-#endif
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-	innovator_mmc_init();
-}
-
-/*
- * REVISIT: Assume 15xx for now, we don't want to do revision check
- * until later on. The right way to fix this is to set up a different
- * machine_id for 16xx Innovator, or use device tree.
- */
-static void __init innovator_map_io(void)
-{
-#ifdef CONFIG_ARCH_OMAP15XX
-	omap15xx_map_io();
-
-	iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
-	udelay(10);	/* Delay needed for FPGA */
-
-	/* Dump the Innovator FPGA rev early - useful info for support. */
-	pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
-			__raw_readb(OMAP1510_FPGA_REV_HIGH),
-			__raw_readb(OMAP1510_FPGA_REV_LOW),
-			__raw_readb(OMAP1510_FPGA_BOARD_REV));
-#endif
-}
-
-MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
-	/* Maintainer: MontaVista Software, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= innovator_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= innovator_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-nand.c b/arch/arm/mach-omap1/board-nand.c
deleted file mode 100644
index 479ab9be784d..000000000000
--- a/arch/arm/mach-omap1/board-nand.c
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-nand.c
- *
- * Common OMAP1 board NAND code
- *
- * Copyright (C) 2004, 2012 Texas Instruments, Inc.
- * Copyright (C) 2002 MontaVista Software, Inc.
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *         Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
- */
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-
-#include "common.h"
-
-void omap1_nand_cmd_ctl(struct nand_chip *this, int cmd, unsigned int ctrl)
-{
-	unsigned long mask;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
-	if (ctrl & NAND_ALE)
-		mask |= 0x04;
-
-	writeb(cmd, this->legacy.IO_ADDR_W + mask);
-}
-
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 8e0e58495023..a5bf5554800f 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -6,17 +6,18 @@
  */
 #include <linux/clkdev.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/gpio/machine.h>
+#include <linux/gpio/property.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/input.h>
 #include <linux/omapfb.h>
 
 #include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
 #include <linux/workqueue.h>
 #include <linux/delay.h>
 
@@ -35,6 +36,25 @@
 #include "clock.h"
 #include "mmc.h"
 
+static const struct software_node nokia770_mpuio_gpiochip_node = {
+	.name = "mpuio",
+};
+
+static const struct software_node nokia770_gpiochip1_node = {
+	.name = "gpio-0-15",
+};
+
+static const struct software_node nokia770_gpiochip2_node = {
+	.name = "gpio-16-31",
+};
+
+static const struct software_node *nokia770_gpiochip_nodes[] = {
+	&nokia770_mpuio_gpiochip_node,
+	&nokia770_gpiochip1_node,
+	&nokia770_gpiochip2_node,
+	NULL
+};
+
 #define ADS7846_PENDOWN_GPIO	15
 
 static const unsigned int nokia770_keymap[] = {
@@ -85,40 +105,47 @@ static struct platform_device *nokia770_devices[] __initdata = {
 	&nokia770_kp_device,
 };
 
-static void mipid_shutdown(struct mipid_platform_data *pdata)
-{
-	if (pdata->nreset_gpio != -1) {
-		printk(KERN_INFO "shutdown LCD\n");
-		gpio_set_value(pdata->nreset_gpio, 0);
-		msleep(120);
-	}
-}
-
-static struct mipid_platform_data nokia770_mipid_platform_data = {
-	.shutdown = mipid_shutdown,
-};
+static struct mipid_platform_data nokia770_mipid_platform_data = { };
 
 static const struct omap_lcd_config nokia770_lcd_config __initconst = {
 	.ctrl_name	= "hwa742",
 };
 
+static const struct property_entry nokia770_mipid_props[] = {
+	PROPERTY_ENTRY_GPIO("reset-gpios", &nokia770_gpiochip1_node,
+			    13, GPIO_ACTIVE_LOW),
+	{ }
+};
+
+static const struct software_node nokia770_mipid_swnode = {
+	.name = "lcd_mipid",
+	.properties = nokia770_mipid_props,
+};
+
 static void __init mipid_dev_init(void)
 {
-	nokia770_mipid_platform_data.nreset_gpio = 13;
 	nokia770_mipid_platform_data.data_lines = 16;
 
 	omapfb_set_lcd_config(&nokia770_lcd_config);
 }
 
-static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = {
-	.x_max		= 0x0fff,
-	.y_max		= 0x0fff,
-	.x_plate_ohms	= 180,
-	.pressure_max	= 255,
-	.debounce_max	= 10,
-	.debounce_tol	= 3,
-	.debounce_rep	= 1,
-	.gpio_pendown	= ADS7846_PENDOWN_GPIO,
+static const struct property_entry nokia770_ads7846_props[] = {
+	PROPERTY_ENTRY_STRING("compatible", "ti,ads7846"),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 4096),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 4096),
+	PROPERTY_ENTRY_U32("touchscreen-max-pressure", 256),
+	PROPERTY_ENTRY_U32("touchscreen-average-samples", 10),
+	PROPERTY_ENTRY_U16("ti,x-plate-ohms", 180),
+	PROPERTY_ENTRY_U16("ti,debounce-tol", 3),
+	PROPERTY_ENTRY_U16("ti,debounce-rep", 1),
+	PROPERTY_ENTRY_GPIO("pendown-gpios", &nokia770_gpiochip1_node,
+			    ADS7846_PENDOWN_GPIO, GPIO_ACTIVE_LOW),
+	{ }
+};
+
+static const struct software_node nokia770_ads7846_swnode = {
+	.name = "ads7846",
+	.properties = nokia770_ads7846_props,
 };
 
 static struct spi_board_info nokia770_spi_board_info[] __initdata = {
@@ -128,13 +155,14 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = {
 		.chip_select    = 3,
 		.max_speed_hz   = 12000000,
 		.platform_data	= &nokia770_mipid_platform_data,
+		.swnode         = &nokia770_mipid_swnode,
 	},
 	[1] = {
 		.modalias       = "ads7846",
 		.bus_num        = 2,
 		.chip_select    = 0,
 		.max_speed_hz   = 2500000,
-		.platform_data	= &nokia770_ads7846_platform_data,
+		.swnode         = &nokia770_ads7846_swnode,
 	},
 };
 
@@ -156,27 +184,23 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
 
 #if IS_ENABLED(CONFIG_MMC_OMAP)
 
-#define NOKIA770_GPIO_MMC_POWER		41
-#define NOKIA770_GPIO_MMC_SWITCH	23
-
-static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on,
-				int vdd)
-{
-	gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on);
-	return 0;
-}
-
-static int nokia770_mmc_get_cover_state(struct device *dev, int slot)
-{
-	return gpio_get_value(NOKIA770_GPIO_MMC_SWITCH);
-}
+static struct gpiod_lookup_table nokia770_mmc_gpio_table = {
+	.dev_id = "mmci-omap.1",
+	.table = {
+		/* Slot index 0, VSD power, GPIO 41 */
+		GPIO_LOOKUP_IDX("gpio-32-47", 9,
+				"vsd", 0, GPIO_ACTIVE_HIGH),
+		/* Slot index 0, switch, GPIO 23 */
+		GPIO_LOOKUP_IDX("gpio-16-31", 7,
+				"cover", 0, GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
 
 static struct omap_mmc_platform_data nokia770_mmc2_data = {
 	.nr_slots                       = 1,
 	.max_freq                       = 12000000,
 	.slots[0]       = {
-		.set_power		= nokia770_mmc_set_power,
-		.get_cover_state	= nokia770_mmc_get_cover_state,
 		.ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
 		.name                   = "mmcblk",
 	},
@@ -186,20 +210,7 @@ static struct omap_mmc_platform_data *nokia770_mmc_data[OMAP16XX_NR_MMC];
 
 static void __init nokia770_mmc_init(void)
 {
-	int ret;
-
-	ret = gpio_request(NOKIA770_GPIO_MMC_POWER, "MMC power");
-	if (ret < 0)
-		return;
-	gpio_direction_output(NOKIA770_GPIO_MMC_POWER, 0);
-
-	ret = gpio_request(NOKIA770_GPIO_MMC_SWITCH, "MMC cover");
-	if (ret < 0) {
-		gpio_free(NOKIA770_GPIO_MMC_POWER);
-		return;
-	}
-	gpio_direction_input(NOKIA770_GPIO_MMC_SWITCH);
-
+	gpiod_add_lookup_table(&nokia770_mmc_gpio_table);
 	/* Only the second MMC controller is used */
 	nokia770_mmc_data[1] = &nokia770_mmc2_data;
 	omap1_init_mmc(nokia770_mmc_data, OMAP16XX_NR_MMC);
@@ -212,14 +223,16 @@ static inline void nokia770_mmc_init(void)
 #endif
 
 #if IS_ENABLED(CONFIG_I2C_CBUS_GPIO)
-static struct gpiod_lookup_table nokia770_cbus_gpio_table = {
-	.dev_id = "i2c-cbus-gpio.2",
-	.table = {
-		GPIO_LOOKUP_IDX("mpuio", 9, NULL, 0, 0), /* clk */
-		GPIO_LOOKUP_IDX("mpuio", 10, NULL, 1, 0), /* dat */
-		GPIO_LOOKUP_IDX("mpuio", 11, NULL, 2, 0), /* sel */
-		{ },
-	},
+
+static const struct software_node_ref_args nokia770_cbus_gpio_refs[] = {
+	SOFTWARE_NODE_REFERENCE(&nokia770_mpuio_gpiochip_node, 9, 0),
+	SOFTWARE_NODE_REFERENCE(&nokia770_mpuio_gpiochip_node, 10, 0),
+	SOFTWARE_NODE_REFERENCE(&nokia770_mpuio_gpiochip_node, 11, 0),
+};
+
+static const struct property_entry nokia770_cbus_props[] = {
+	PROPERTY_ENTRY_REF_ARRAY("gpios", nokia770_cbus_gpio_refs),
+	{ }
 };
 
 static struct platform_device nokia770_cbus_device = {
@@ -238,22 +251,29 @@ static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = {
 
 static void __init nokia770_cbus_init(void)
 {
-	const int retu_irq_gpio = 62;
-	const int tahvo_irq_gpio = 40;
-
-	if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ"))
-		return;
-	if (gpio_request_one(tahvo_irq_gpio, GPIOF_IN, "Tahvo IRQ")) {
-		gpio_free(retu_irq_gpio);
-		return;
+	struct gpio_desc *d;
+	int irq;
+
+	d = gpiod_get(NULL, "retu_irq", GPIOD_IN);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get CBUS Retu IRQ GPIO descriptor\n");
+	} else {
+		irq = gpiod_to_irq(d);
+		irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+		nokia770_i2c_board_info_2[0].irq = irq;
+	}
+	d = gpiod_get(NULL, "tahvo_irq", GPIOD_IN);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get CBUS Tahvo IRQ GPIO descriptor\n");
+	} else {
+		irq = gpiod_to_irq(d);
+		irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+		nokia770_i2c_board_info_2[1].irq = irq;
 	}
-	irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(tahvo_irq_gpio), IRQ_TYPE_EDGE_RISING);
-	nokia770_i2c_board_info_2[0].irq = gpio_to_irq(retu_irq_gpio);
-	nokia770_i2c_board_info_2[1].irq = gpio_to_irq(tahvo_irq_gpio);
 	i2c_register_board_info(2, nokia770_i2c_board_info_2,
 				ARRAY_SIZE(nokia770_i2c_board_info_2));
-	gpiod_add_lookup_table(&nokia770_cbus_gpio_table);
+	device_create_managed_software_node(&nokia770_cbus_device.dev,
+					    nokia770_cbus_props, NULL);
 	platform_device_register(&nokia770_cbus_device);
 }
 #else /* CONFIG_I2C_CBUS_GPIO */
@@ -262,8 +282,33 @@ static void __init nokia770_cbus_init(void)
 }
 #endif /* CONFIG_I2C_CBUS_GPIO */
 
+static struct gpiod_lookup_table nokia770_irq_gpio_table = {
+	.dev_id = NULL,
+	.table = {
+		/* GPIO used by SPI device 1 */
+		GPIO_LOOKUP("gpio-0-15", 15, "ads7846_irq",
+			    GPIO_ACTIVE_HIGH),
+		/* GPIO used for retu IRQ */
+		GPIO_LOOKUP("gpio-48-63", 14, "retu_irq",
+			    GPIO_ACTIVE_HIGH),
+		/* GPIO used for tahvo IRQ */
+		GPIO_LOOKUP("gpio-32-47", 8, "tahvo_irq",
+			    GPIO_ACTIVE_HIGH),
+		/* GPIOs used by serial wakeup IRQs */
+		GPIO_LOOKUP_IDX("gpio-32-47", 5, "wakeup", 0,
+			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio-16-31", 2, "wakeup", 1,
+			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio-48-63", 1, "wakeup", 2,
+			    GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
 static void __init omap_nokia770_init(void)
 {
+	struct gpio_desc *d;
+
 	/* On Nokia 770, the SleepX signal is masked with an
 	 * MPUIO line by default.  It has to be unmasked for it
 	 * to become functional */
@@ -273,8 +318,16 @@ static void __init omap_nokia770_init(void)
 	/* Unmask SleepX signal */
 	omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
 
+	software_node_register_node_group(nokia770_gpiochip_nodes);
 	platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
-	nokia770_spi_board_info[1].irq = gpio_to_irq(15);
+
+	gpiod_add_lookup_table(&nokia770_irq_gpio_table);
+	d = gpiod_get(NULL, "ads7846_irq", GPIOD_IN);
+	if (IS_ERR(d))
+		pr_err("Unable to get ADS7846 IRQ GPIO descriptor\n");
+	else
+		nokia770_spi_board_info[1].irq = gpiod_to_irq(d);
+
 	spi_register_board_info(nokia770_spi_board_info,
 				ARRAY_SIZE(nokia770_spi_board_info));
 	omap_serial_init();
@@ -288,10 +341,9 @@ static void __init omap_nokia770_init(void)
 
 MACHINE_START(NOKIA770, "Nokia 770")
 	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
+	.map_io		= omap1_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_nokia770_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 76684b7a4e87..7d5e6f9039d5 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -25,7 +25,8 @@
  * with this program; if not, write  to the Free Software Foundation, Inc.,
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
 #include <linux/gpio/machine.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -64,13 +65,12 @@
 /* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
  * alternate pin configurations for hardware-controlled blinking.
  */
-#define OSK_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-#	define OSK_TPS_GPIO_USB_PWR_EN	(OSK_TPS_GPIO_BASE + 0)
-#	define OSK_TPS_GPIO_LED_D3	(OSK_TPS_GPIO_BASE + 1)
-#	define OSK_TPS_GPIO_LAN_RESET	(OSK_TPS_GPIO_BASE + 2)
-#	define OSK_TPS_GPIO_DSP_PWR_EN	(OSK_TPS_GPIO_BASE + 3)
-#	define OSK_TPS_GPIO_LED_D9	(OSK_TPS_GPIO_BASE + 4)
-#	define OSK_TPS_GPIO_LED_D2	(OSK_TPS_GPIO_BASE + 5)
+#define OSK_TPS_GPIO_USB_PWR_EN	0
+#define OSK_TPS_GPIO_LED_D3	1
+#define OSK_TPS_GPIO_LAN_RESET	2
+#define OSK_TPS_GPIO_DSP_PWR_EN	3
+#define OSK_TPS_GPIO_LED_D9	4
+#define OSK_TPS_GPIO_LED_D2	5
 
 static struct mtd_partition osk_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
@@ -174,11 +174,20 @@ static const struct gpio_led tps_leds[] = {
 	/* NOTE:  D9 and D2 have hardware blink support.
 	 * Also, D9 requires non-battery power.
 	 */
-	{ .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
-			.default_trigger = "disk-activity", },
-	{ .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
-	{ .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
-			.default_trigger = "heartbeat", },
+	{ .name = "d9", .default_trigger = "disk-activity", },
+	{ .name = "d2", },
+	{ .name = "d3", .default_trigger = "heartbeat", },
+};
+
+static struct gpiod_lookup_table tps_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		/* Use local offsets on TPS65010 */
+		GPIO_LOOKUP_IDX("tps65010", OSK_TPS_GPIO_LED_D9, NULL, 0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("tps65010", OSK_TPS_GPIO_LED_D2, NULL, 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("tps65010", OSK_TPS_GPIO_LED_D3, NULL, 2, GPIO_ACTIVE_LOW),
+		{ }
+	},
 };
 
 static struct gpio_led_platform_data tps_leds_data = {
@@ -192,29 +201,34 @@ static struct platform_device osk5912_tps_leds = {
 	.dev.platform_data	= &tps_leds_data,
 };
 
-static int osk_tps_setup(struct i2c_client *client, void *context)
+/* The board just hold these GPIOs hogged from setup to teardown */
+static struct gpio_desc *eth_reset;
+static struct gpio_desc *vdd_dsp;
+
+static int osk_tps_setup(struct i2c_client *client, struct gpio_chip *gc)
 {
+	struct gpio_desc *d;
 	if (!IS_BUILTIN(CONFIG_TPS65010))
 		return -ENOSYS;
 
 	/* Set GPIO 1 HIGH to disable VBUS power supply;
 	 * OHCI driver powers it up/down as needed.
 	 */
-	gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en");
-	gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1);
+	d = gpiochip_request_own_desc(gc, OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en",
+				      GPIO_ACTIVE_HIGH, GPIOD_OUT_HIGH);
 	/* Free the GPIO again as the driver will request it */
-	gpio_free(OSK_TPS_GPIO_USB_PWR_EN);
+	gpiochip_free_own_desc(d);
 
 	/* Set GPIO 2 high so LED D3 is off by default */
 	tps65010_set_gpio_out_value(GPIO2, HIGH);
 
 	/* Set GPIO 3 low to take ethernet out of reset */
-	gpio_request(OSK_TPS_GPIO_LAN_RESET, "smc_reset");
-	gpio_direction_output(OSK_TPS_GPIO_LAN_RESET, 0);
+	eth_reset = gpiochip_request_own_desc(gc, OSK_TPS_GPIO_LAN_RESET, "smc_reset",
+					      GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW);
 
 	/* GPIO4 is VDD_DSP */
-	gpio_request(OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power");
-	gpio_direction_output(OSK_TPS_GPIO_DSP_PWR_EN, 1);
+	vdd_dsp = gpiochip_request_own_desc(gc, OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power",
+					    GPIO_ACTIVE_HIGH, GPIOD_OUT_HIGH);
 	/* REVISIT if DSP support isn't configured, power it off ... */
 
 	/* Let LED1 (D9) blink; leds-gpio may override it */
@@ -232,15 +246,22 @@ static int osk_tps_setup(struct i2c_client *client, void *context)
 
 	/* register these three LEDs */
 	osk5912_tps_leds.dev.parent = &client->dev;
+	gpiod_add_lookup_table(&tps_leds_gpio_table);
 	platform_device_register(&osk5912_tps_leds);
 
 	return 0;
 }
 
+static void osk_tps_teardown(struct i2c_client *client, struct gpio_chip *gc)
+{
+	gpiochip_free_own_desc(eth_reset);
+	gpiochip_free_own_desc(vdd_dsp);
+}
+
 static struct tps65010_board tps_board = {
-	.base		= OSK_TPS_GPIO_BASE,
 	.outmask	= 0x0f,
 	.setup		= osk_tps_setup,
+	.teardown	= osk_tps_teardown,
 };
 
 static struct i2c_board_info __initdata osk_i2c_board_info[] = {
@@ -263,11 +284,6 @@ static void __init osk_init_smc91x(void)
 {
 	u32 l;
 
-	if ((gpio_request(0, "smc_irq")) < 0) {
-		printk("Error requesting gpio 0 for smc91x irq\n");
-		return;
-	}
-
 	/* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
 	l = omap_readl(EMIFS_CCS(1));
 	l |= 0x3;
@@ -279,10 +295,6 @@ static void __init osk_init_cf(int seg)
 	struct resource *res = &osk5912_cf_resources[1];
 
 	omap_cfg_reg(M7_1610_GPIO62);
-	if ((gpio_request(62, "cf_irq")) < 0) {
-		printk("Error requesting gpio 62 for CF irq\n");
-		return;
-	}
 
 	switch (seg) {
 	/* NOTE: CS0 could be configured too ... */
@@ -308,18 +320,17 @@ static void __init osk_init_cf(int seg)
 		seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg)));
 	omap_writel(0x0004a1b3, EMIFS_CCS(seg));	/* synch mode 4 etc */
 	omap_writel(0x00000000, EMIFS_ACS(seg));	/* OE hold/setup */
-
-	/* the CF I/O IRQ is really active-low */
-	irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
 }
 
 static struct gpiod_lookup_table osk_usb_gpio_table = {
 	.dev_id = "ohci",
 	.table = {
 		/* Power GPIO on the I2C-attached TPS65010 */
-		GPIO_LOOKUP("tps65010", 0, "power", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("tps65010", OSK_TPS_GPIO_USB_PWR_EN, "power",
+			    GPIO_ACTIVE_HIGH),
 		GPIO_LOOKUP(OMAP_GPIO_LABEL, 9, "overcurrent",
 			    GPIO_ACTIVE_HIGH),
+		{ }
 	},
 };
 
@@ -339,271 +350,34 @@ static struct omap_usb_config osk_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-static const struct omap_lcd_config osk_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-#endif
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-
-#include <linux/input.h>
-#include <linux/property.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-#include <linux/platform_data/keypad-omap.h>
-
-static const struct property_entry mistral_at24_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 16),
-	{ }
-};
-
-static const struct software_node mistral_at24_node = {
-	.properties = mistral_at24_properties,
-};
-
-static struct i2c_board_info __initdata mistral_i2c_board_info[] = {
-	{
-		/* NOTE:  powered from LCD supply */
-		I2C_BOARD_INFO("24c04", 0x50),
-		.swnode = &mistral_at24_node,
-	},
-	/* TODO when driver support is ready:
-	 *  - optionally ov9640 camera sensor at 0x30
-	 */
-};
-
-static const unsigned int osk_keymap[] = {
-	/* KEY(col, row, code) */
-	KEY(0, 0, KEY_F1),		/* SW4 */
-	KEY(3, 0, KEY_UP),		/* (sw2/up) */
-	KEY(1, 1, KEY_LEFTCTRL),	/* SW5 */
-	KEY(2, 1, KEY_LEFT),		/* (sw2/left) */
-	KEY(0, 2, KEY_SPACE),		/* SW3 */
-	KEY(1, 2, KEY_ESC),		/* SW6 */
-	KEY(2, 2, KEY_DOWN),		/* (sw2/down) */
-	KEY(2, 3, KEY_ENTER),		/* (sw2/select) */
-	KEY(3, 3, KEY_RIGHT),		/* (sw2/right) */
-};
-
-static const struct matrix_keymap_data osk_keymap_data = {
-	.keymap		= osk_keymap,
-	.keymap_size	= ARRAY_SIZE(osk_keymap),
-};
-
-static struct omap_kp_platform_data osk_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &osk_keymap_data,
-	.delay		= 9,
-};
-
-static struct resource osk5912_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device osk5912_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &osk_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(osk5912_kp_resources),
-	.resource	= osk5912_kp_resources,
-};
-
-static struct omap_backlight_config mistral_bl_data = {
-	.default_intensity	= 0xa0,
-};
-
-static struct platform_device mistral_bl_device = {
-	.name		= "omap-bl",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &mistral_bl_data,
-	},
-};
-
-static struct platform_device osk5912_lcd_device = {
-	.name		= "lcd_osk",
-	.id		= -1,
-};
-
-static const struct gpio_led mistral_gpio_led_pins[] = {
-	{
-		.name		= "mistral:red",
-		.default_trigger = "heartbeat",
-		.gpio		= 3,
-	},
-	{
-		.name		= "mistral:green",
-		.default_trigger = "cpu0",
-		.gpio		= OMAP_MPUIO(4),
-	},
-};
-
-static struct gpio_led_platform_data mistral_gpio_led_data = {
-	.leds		= mistral_gpio_led_pins,
-	.num_leds	= ARRAY_SIZE(mistral_gpio_led_pins),
-};
+#define EMIFS_CS3_VAL	(0x88013141)
 
-static struct platform_device mistral_gpio_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &mistral_gpio_led_data,
+static struct gpiod_lookup_table osk_irq_gpio_table = {
+	.dev_id = NULL,
+	.table = {
+		/* GPIO used for SMC91x IRQ */
+		GPIO_LOOKUP(OMAP_GPIO_LABEL, 0, "smc_irq",
+			    GPIO_ACTIVE_HIGH),
+		/* GPIO used for CF IRQ */
+		GPIO_LOOKUP("gpio-48-63", 14, "cf_irq",
+			    GPIO_ACTIVE_HIGH),
+		/* GPIO used by the TPS65010 chip */
+		GPIO_LOOKUP("mpuio", 1, "tps65010",
+			    GPIO_ACTIVE_HIGH),
+		/* GPIOs used for serial wakeup IRQs */
+		GPIO_LOOKUP_IDX("gpio-32-47", 5, "wakeup", 0,
+			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio-16-31", 2, "wakeup", 1,
+			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio-48-63", 1, "wakeup", 2,
+			    GPIO_ACTIVE_HIGH),
+		{ }
 	},
 };
 
-static struct platform_device *mistral_devices[] __initdata = {
-	&osk5912_kp_device,
-	&mistral_bl_device,
-	&osk5912_lcd_device,
-	&mistral_gpio_leds,
-};
-
-static int mistral_get_pendown_state(void)
-{
-	return !gpio_get_value(4);
-}
-
-static const struct ads7846_platform_data mistral_ts_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.get_pendown_state	= mistral_get_pendown_state,
-};
-
-static struct spi_board_info __initdata mistral_boardinfo[] = { {
-	/* MicroWire (bus 2) CS0 has an ads7846e */
-	.modalias		= "ads7846",
-	.platform_data		= &mistral_ts_info,
-	.max_speed_hz		= 120000 /* max sample rate at 3V */
-					* 26 /* command + data + overhead */,
-	.bus_num		= 2,
-	.chip_select		= 0,
-} };
-
-static irqreturn_t
-osk_mistral_wake_interrupt(int irq, void *ignored)
-{
-	return IRQ_HANDLED;
-}
-
-static void __init osk_mistral_init(void)
-{
-	/* NOTE:  we could actually tell if there's a Mistral board
-	 * attached, e.g. by trying to read something from the ads7846.
-	 * But this arch_init() code is too early for that, since we
-	 * can't talk to the ads or even the i2c eeprom.
-	 */
-
-	/* parallel camera interface */
-	omap_cfg_reg(J15_1610_CAM_LCLK);
-	omap_cfg_reg(J18_1610_CAM_D7);
-	omap_cfg_reg(J19_1610_CAM_D6);
-	omap_cfg_reg(J14_1610_CAM_D5);
-	omap_cfg_reg(K18_1610_CAM_D4);
-	omap_cfg_reg(K19_1610_CAM_D3);
-	omap_cfg_reg(K15_1610_CAM_D2);
-	omap_cfg_reg(K14_1610_CAM_D1);
-	omap_cfg_reg(L19_1610_CAM_D0);
-	omap_cfg_reg(L18_1610_CAM_VS);
-	omap_cfg_reg(L15_1610_CAM_HS);
-	omap_cfg_reg(M19_1610_CAM_RSTZ);
-	omap_cfg_reg(Y15_1610_CAM_OUTCLK);
-
-	/* serial camera interface */
-	omap_cfg_reg(H19_1610_CAM_EXCLK);
-	omap_cfg_reg(W13_1610_CCP_CLKM);
-	omap_cfg_reg(Y12_1610_CCP_CLKP);
-	/* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */
-	/* omap_cfg_reg(Y14_1610_CCP_DATAM); */
-	omap_cfg_reg(W14_1610_CCP_DATAP);
-
-	/* CAM_PWDN */
-	if (gpio_request(11, "cam_pwdn") == 0) {
-		omap_cfg_reg(N20_1610_GPIO11);
-		gpio_direction_output(11, 0);
-	} else
-		pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
-
-
-	/* omap_cfg_reg(P19_1610_GPIO6); */	/* BUSY */
-	gpio_request(6, "ts_busy");
-	gpio_direction_input(6);
-
-	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
-	gpio_request(4, "ts_int");
-	gpio_direction_input(4);
-	irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING);
-
-	mistral_boardinfo[0].irq = gpio_to_irq(4);
-	spi_register_board_info(mistral_boardinfo,
-			ARRAY_SIZE(mistral_boardinfo));
-
-	/* the sideways button (SW1) is for use as a "wakeup" button
-	 *
-	 * NOTE:  The Mistral board has the wakeup button (SW1) wired
-	 * to the LCD 3.3V rail, which is powered down during suspend.
-	 * To allow this button to wake up the omap, work around this
-	 * HW bug by rewiring SW1 to use the main 3.3V rail.
-	 */
-	omap_cfg_reg(N15_1610_MPUIO2);
-	if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) {
-		int ret = 0;
-		int irq = gpio_to_irq(OMAP_MPUIO(2));
-
-		gpio_direction_input(OMAP_MPUIO(2));
-		irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
-		/* share the IRQ in case someone wants to use the
-		 * button for more than wakeup from system sleep.
-		 */
-		ret = request_irq(irq,
-				&osk_mistral_wake_interrupt,
-				IRQF_SHARED, "mistral_wakeup",
-				&osk_mistral_wake_interrupt);
-		if (ret != 0) {
-			gpio_free(OMAP_MPUIO(2));
-			printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
-				ret);
-		} else
-			enable_irq_wake(irq);
-	} else
-		printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
-
-	/* LCD:  backlight, and power; power controls other devices on the
-	 * board, like the touchscreen, EEPROM, and wakeup (!) switch.
-	 */
-	omap_cfg_reg(PWL);
-	if (gpio_request(2, "lcd_pwr") == 0)
-		gpio_direction_output(2, 1);
-
-	/*
-	 * GPIO based LEDs
-	 */
-	omap_cfg_reg(P18_1610_GPIO3);
-	omap_cfg_reg(MPUIO4);
-
-	i2c_register_board_info(1, mistral_i2c_board_info,
-			ARRAY_SIZE(mistral_i2c_board_info));
-
-	platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
-}
-#else
-static void __init osk_mistral_init(void) { }
-#endif
-
-#define EMIFS_CS3_VAL	(0x88013141)
-
 static void __init osk_init(void)
 {
+	struct gpio_desc *d;
 	u32 l;
 
 	osk_init_smc91x();
@@ -620,10 +394,31 @@ static void __init osk_init(void)
 
 	osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
 	osk_flash_resource.end += SZ_32M - 1;
-	osk5912_smc91x_resources[1].start = gpio_to_irq(0);
-	osk5912_smc91x_resources[1].end = gpio_to_irq(0);
-	osk5912_cf_resources[0].start = gpio_to_irq(62);
-	osk5912_cf_resources[0].end = gpio_to_irq(62);
+
+	/*
+	 * Add the GPIOs to be used as IRQs and immediately look them up
+	 * to be passed as an IRQ resource. This is ugly but should work
+	 * until the day we convert to device tree.
+	 */
+	gpiod_add_lookup_table(&osk_irq_gpio_table);
+
+	d = gpiod_get(NULL, "smc_irq", GPIOD_IN);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get SMC IRQ GPIO descriptor\n");
+	} else {
+		irq_set_irq_type(gpiod_to_irq(d), IRQ_TYPE_EDGE_RISING);
+		osk5912_smc91x_resources[1] = DEFINE_RES_IRQ(gpiod_to_irq(d));
+	}
+
+	d = gpiod_get(NULL, "cf_irq", GPIOD_IN);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get CF IRQ GPIO descriptor\n");
+	} else {
+		/* the CF I/O IRQ is really active-low */
+		irq_set_irq_type(gpiod_to_irq(d), IRQ_TYPE_EDGE_FALLING);
+		osk5912_cf_resources[0] = DEFINE_RES_IRQ(gpiod_to_irq(d));
+	}
+
 	platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
 
 	l = omap_readl(USB_TRANSCEIVER_CTRL);
@@ -633,30 +428,25 @@ static void __init osk_init(void)
 	gpiod_add_lookup_table(&osk_usb_gpio_table);
 	omap1_usb_init(&osk_usb_config);
 
+	omap_serial_init();
+
 	/* irq for tps65010 chip */
 	/* bootloader effectively does:  omap_cfg_reg(U19_1610_MPUIO1); */
-	if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0)
-		gpio_direction_input(OMAP_MPUIO(1));
-
-	omap_serial_init();
-	osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1));
+	d = gpiod_get(NULL, "tps65010", GPIOD_IN);
+	if (IS_ERR(d))
+		pr_err("Unable to get TPS65010 IRQ GPIO descriptor\n");
+	else
+		osk_i2c_board_info[0].irq = gpiod_to_irq(d);
 	omap_register_i2c_bus(1, 400, osk_i2c_board_info,
 			      ARRAY_SIZE(osk_i2c_board_info));
-	osk_mistral_init();
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-	omapfb_set_lcd_config(&osk_lcd_config);
-#endif
-
 }
 
 MACHINE_START(OMAP_OSK, "TI-OSK")
 	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
 	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
+	.map_io		= omap1_map_io,
 	.init_early	= omap1_init_early,
 	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
 	.init_machine	= osk_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 72e1979c7a8b..c917cb2c6e17 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -13,7 +13,8 @@
  *
  * Copyright (c) 2006 Andrzej Zaborowski  <balrog@zabor.org>
  */
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/input.h>
@@ -50,11 +51,6 @@
 #define PALMTE_HDQ_GPIO		11
 #define PALMTE_HEADPHONES_GPIO	14
 #define PALMTE_SPEAKER_GPIO	15
-#define PALMTE_DC_GPIO		OMAP_MPUIO(2)
-#define PALMTE_MMC_SWITCH_GPIO	OMAP_MPUIO(4)
-#define PALMTE_MMC1_GPIO	OMAP_MPUIO(6)
-#define PALMTE_MMC2_GPIO	OMAP_MPUIO(7)
-#define PALMTE_MMC3_GPIO	OMAP_MPUIO(11)
 
 static const unsigned int palmte_keymap[] = {
 	KEY(0, 0, KEY_F1),		/* Calendar */
@@ -187,23 +183,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
 	},
 };
 
-static void __init palmte_misc_gpio_setup(void)
-{
-	/* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */
-	if (gpio_request(PALMTE_PINTDAV_GPIO, "TSC2102 PINTDAV") < 0) {
-		printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n");
-		return;
-	}
-	gpio_direction_input(PALMTE_PINTDAV_GPIO);
-
-	/* Set USB-or-DC-IN pin as input (unused) */
-	if (gpio_request(PALMTE_USB_OR_DC_GPIO, "USB/DC-IN") < 0) {
-		printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
-		return;
-	}
-	gpio_direction_input(PALMTE_USB_OR_DC_GPIO);
-}
-
 #if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static struct omap_mmc_platform_data _palmte_mmc_config = {
@@ -231,8 +210,23 @@ static void palmte_mmc_init(void)
 
 #endif /* CONFIG_MMC_OMAP */
 
+static struct gpiod_lookup_table palmte_irq_gpio_table = {
+	.dev_id = NULL,
+	.table = {
+		/* GPIO used for TSC2102 PINTDAV IRQ */
+		GPIO_LOOKUP("gpio-0-15", PALMTE_PINTDAV_GPIO, "tsc2102_irq",
+			    GPIO_ACTIVE_HIGH),
+		/* GPIO used for USB or DC input detection */
+		GPIO_LOOKUP("gpio-0-15", PALMTE_USB_OR_DC_GPIO, "usb_dc_irq",
+			    GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
 static void __init omap_palmte_init(void)
 {
+	struct gpio_desc *d;
+
 	/* mux pins for uarts */
 	omap_cfg_reg(UART1_TX);
 	omap_cfg_reg(UART1_RTS);
@@ -243,9 +237,21 @@ static void __init omap_palmte_init(void)
 
 	platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices));
 
-	palmte_spi_info[0].irq = gpio_to_irq(PALMTE_PINTDAV_GPIO);
+	gpiod_add_lookup_table(&palmte_irq_gpio_table);
+	d = gpiod_get(NULL, "tsc2102_irq", GPIOD_IN);
+	if (IS_ERR(d))
+		pr_err("Unable to get TSC2102 IRQ GPIO descriptor\n");
+	else
+		palmte_spi_info[0].irq = gpiod_to_irq(d);
 	spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
-	palmte_misc_gpio_setup();
+
+	/* We are getting this just to set it up as input */
+	d = gpiod_get(NULL, "usb_dc_irq", GPIOD_IN);
+	if (IS_ERR(d))
+		pr_err("Unable to get USB/DC IRQ GPIO descriptor\n");
+	else
+		gpiod_put(d);
+
 	omap_serial_init();
 	omap1_usb_init(&palmte_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
@@ -256,10 +262,9 @@ static void __init omap_palmte_init(void)
 
 MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
+	.map_io		= omap1_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_palmte_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
deleted file mode 100644
index 537f0e6a2ff7..000000000000
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ /dev/null
@@ -1,285 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-palmtt.c
- *
- * Modified from board-palmtt2.c
- *
- * Modified and amended for Palm Tungsten|T
- * by Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/notifier.h>
-#include <linux/clk.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/leds.h>
-#include <linux/omapfb.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/omap-dma.h>
-#include <linux/platform_data/omap1_bl.h>
-#include <linux/platform_data/leds-omap.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "tc.h"
-#include "flash.h"
-#include "mux.h"
-#include "hardware.h"
-#include "usb.h"
-#include "common.h"
-
-#define PALMTT_USBDETECT_GPIO	0
-#define PALMTT_CABLE_GPIO	1
-#define PALMTT_LED_GPIO		3
-#define PALMTT_PENIRQ_GPIO	6
-#define PALMTT_MMC_WP_GPIO	8
-#define PALMTT_HDQ_GPIO		11
-
-static const unsigned int palmtt_keymap[] = {
-	KEY(0, 0, KEY_ESC),
-	KEY(1, 0, KEY_SPACE),
-	KEY(2, 0, KEY_LEFTCTRL),
-	KEY(3, 0, KEY_TAB),
-	KEY(4, 0, KEY_ENTER),
-	KEY(0, 1, KEY_LEFT),
-	KEY(1, 1, KEY_DOWN),
-	KEY(2, 1, KEY_UP),
-	KEY(3, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_SLEEP),
-	KEY(4, 2, KEY_Y),
-};
-
-static struct mtd_partition palmtt_partitions[] = {
-	{
-		.name		= "write8k",
-		.offset		= 0,
-		.size		= SZ_8K,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "PalmOS-BootLoader(ro)",
-		.offset		= SZ_8K,
-		.size		= 7 * SZ_8K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "u-boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * SZ_8K,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "PalmOS-FS(ro)",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 7 * SZ_1M + 4 * SZ_64K - 16 * SZ_8K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "u-boot(rez)",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= 0
-	},
-	{
-		.name		= "empty",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data palmtt_flash_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= palmtt_partitions,
-	.nr_parts	= ARRAY_SIZE(palmtt_partitions),
-};
-
-static struct resource palmtt_flash_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_8M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device palmtt_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &palmtt_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &palmtt_flash_resource,
-};
-
-static struct resource palmtt_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data palmtt_keymap_data = {
-	.keymap		= palmtt_keymap,
-	.keymap_size	= ARRAY_SIZE(palmtt_keymap),
-};
-
-static struct omap_kp_platform_data palmtt_kp_data = {
-	.rows	= 6,
-	.cols	= 3,
-	.keymap_data = &palmtt_keymap_data,
-};
-
-static struct platform_device palmtt_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &palmtt_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(palmtt_kp_resources),
-	.resource	= palmtt_kp_resources,
-};
-
-static struct platform_device palmtt_lcd_device = {
-	.name		= "lcd_palmtt",
-	.id		= -1,
-};
-
-static struct platform_device palmtt_spi_device = {
-	.name		= "spi_palmtt",
-	.id		= -1,
-};
-
-static struct omap_backlight_config palmtt_backlight_config = {
-	.default_intensity	= 0xa0,
-};
-
-static struct platform_device palmtt_backlight_device = {
-	.name		= "omap-bl",
-	.id		= -1,
-	.dev		= {
-		.platform_data= &palmtt_backlight_config,
-	},
-};
-
-static struct omap_led_config palmtt_led_config[] = {
-	{
-		.cdev	= {
-			.name	= "palmtt:led0",
-		},
-		.gpio	= PALMTT_LED_GPIO,
-	},
-};
-
-static struct omap_led_platform_data palmtt_led_data = {
-	.nr_leds	= ARRAY_SIZE(palmtt_led_config),
-	.leds		= palmtt_led_config,
-};
-
-static struct platform_device palmtt_led_device = {
-	.name	= "omap-led",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmtt_led_data,
-	},
-};
-
-static struct platform_device *palmtt_devices[] __initdata = {
-	&palmtt_flash_device,
-	&palmtt_kp_device,
-	&palmtt_lcd_device,
-	&palmtt_spi_device,
-	&palmtt_backlight_device,
-	&palmtt_led_device,
-};
-
-static int palmtt_get_pendown_state(void)
-{
-	return !gpio_get_value(6);
-}
-
-static const struct ads7846_platform_data palmtt_ts_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.get_pendown_state	= palmtt_get_pendown_state,
-};
-
-static struct spi_board_info __initdata palmtt_boardinfo[] = {
-	{
-		/* MicroWire (bus 2) CS0 has an ads7846e */
-		.modalias	= "ads7846",
-		.platform_data	= &palmtt_ts_info,
-		.max_speed_hz	= 120000	/* max sample rate at 3V */
-					* 26	/* command + data + overhead */,
-		.bus_num	= 2,
-		.chip_select	= 0,
-	}
-};
-
-static struct omap_usb_config palmtt_usb_config __initdata = {
-	.register_dev	= 1,
-	.hmc_mode	= 0,
-	.pins[0]	= 2,
-};
-
-static const struct omap_lcd_config palmtt_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-
-static void __init omap_mpu_wdt_mode(int mode) {
-	if (mode)
-		omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
-	else {
-		omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
-		omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
-	}
-}
-
-static void __init omap_palmtt_init(void)
-{
-	/* mux pins for uarts */
-	omap_cfg_reg(UART1_TX);
-	omap_cfg_reg(UART1_RTS);
-	omap_cfg_reg(UART2_TX);
-	omap_cfg_reg(UART2_RTS);
-	omap_cfg_reg(UART3_TX);
-	omap_cfg_reg(UART3_RX);
-
-	omap_mpu_wdt_mode(0);
-
-	platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
-
-	palmtt_boardinfo[0].irq = gpio_to_irq(6);
-	spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
-	omap_serial_init();
-	omap1_usb_init(&palmtt_usb_config);
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	omapfb_set_lcd_config(&palmtt_lcd_config);
-}
-
-MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
-	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= omap_palmtt_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
deleted file mode 100644
index 47f08ae5a2f3..000000000000
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ /dev/null
@@ -1,300 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-palmz71.c
- *
- * Modified from board-generic.c
- *
- * Support for the Palm Zire71 PDA.
- *
- * Original version : Laurent Gonzalez
- *
- * Modified for zire71 : Marek Vasut
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/notifier.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/omapfb.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/platform_data/omap1_bl.h>
-#include <linux/platform_data/keypad-omap.h>
-#include <linux/omap-dma.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "tc.h"
-#include "flash.h"
-#include "mux.h"
-#include "hardware.h"
-#include "usb.h"
-#include "common.h"
-
-#define PALMZ71_USBDETECT_GPIO	0
-#define PALMZ71_PENIRQ_GPIO	6
-#define PALMZ71_MMC_WP_GPIO	8
-#define PALMZ71_HDQ_GPIO 	11
-
-#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)
-#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)
-#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
-#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)
-
-static const unsigned int palmz71_keymap[] = {
-	KEY(0, 0, KEY_F1),
-	KEY(1, 0, KEY_F2),
-	KEY(2, 0, KEY_F3),
-	KEY(3, 0, KEY_F4),
-	KEY(4, 0, KEY_POWER),
-	KEY(0, 1, KEY_LEFT),
-	KEY(1, 1, KEY_DOWN),
-	KEY(2, 1, KEY_UP),
-	KEY(3, 1, KEY_RIGHT),
-	KEY(4, 1, KEY_ENTER),
-	KEY(0, 2, KEY_CAMERA),
-};
-
-static const struct matrix_keymap_data palmz71_keymap_data = {
-	.keymap		= palmz71_keymap,
-	.keymap_size	= ARRAY_SIZE(palmz71_keymap),
-};
-
-static struct omap_kp_platform_data palmz71_kp_data = {
-	.rows	= 8,
-	.cols	= 8,
-	.keymap_data	= &palmz71_keymap_data,
-	.rep	= true,
-	.delay	= 80,
-};
-
-static struct resource palmz71_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device palmz71_kp_device = {
-	.name	= "omap-keypad",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmz71_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(palmz71_kp_resources),
-	.resource	= palmz71_kp_resources,
-};
-
-static struct mtd_partition palmz71_rom_partitions[] = {
-	/* PalmOS "Small ROM", contains the bootloader and the debugger */
-	{
-		.name		= "smallrom",
-		.offset		= 0,
-		.size		= 0xa000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	/* PalmOS "Big ROM", a filesystem with all the OS code and data */
-	{
-		.name	= "bigrom",
-		.offset	= SZ_128K,
-		/*
-		 * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
-		 * 0x7b0000 bytes in the English-only ("enUS") version.
-		 */
-		.size		= 0x7b0000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data palmz71_rom_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= palmz71_rom_partitions,
-	.nr_parts	= ARRAY_SIZE(palmz71_rom_partitions),
-};
-
-static struct resource palmz71_rom_resource = {
-	.start	= OMAP_CS0_PHYS,
-	.end	= OMAP_CS0_PHYS + SZ_8M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device palmz71_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.dev = {
-		.platform_data = &palmz71_rom_data,
-	},
-	.num_resources	= 1,
-	.resource	= &palmz71_rom_resource,
-};
-
-static struct platform_device palmz71_lcd_device = {
-	.name	= "lcd_palmz71",
-	.id	= -1,
-};
-
-static struct platform_device palmz71_spi_device = {
-	.name	= "spi_palmz71",
-	.id	= -1,
-};
-
-static struct omap_backlight_config palmz71_backlight_config = {
-	.default_intensity	= 0xa0,
-};
-
-static struct platform_device palmz71_backlight_device = {
-	.name	= "omap-bl",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmz71_backlight_config,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&palmz71_rom_device,
-	&palmz71_kp_device,
-	&palmz71_lcd_device,
-	&palmz71_spi_device,
-	&palmz71_backlight_device,
-};
-
-static int
-palmz71_get_pendown_state(void)
-{
-	return !gpio_get_value(PALMZ71_PENIRQ_GPIO);
-}
-
-static const struct ads7846_platform_data palmz71_ts_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.get_pendown_state	= palmz71_get_pendown_state,
-};
-
-static struct spi_board_info __initdata palmz71_boardinfo[] = { {
-	/* MicroWire (bus 2) CS0 has an ads7846e */
-	.modalias	= "ads7846",
-	.platform_data	= &palmz71_ts_info,
-	.max_speed_hz	= 120000	/* max sample rate at 3V */
-				* 26	/* command + data + overhead */,
-	.bus_num	= 2,
-	.chip_select	= 0,
-} };
-
-static struct omap_usb_config palmz71_usb_config __initdata = {
-	.register_dev	= 1,	/* Mini-B only receptacle */
-	.hmc_mode	= 0,
-	.pins[0]	= 2,
-};
-
-static const struct omap_lcd_config palmz71_lcd_config __initconst = {
-	.ctrl_name = "internal",
-};
-
-static irqreturn_t
-palmz71_powercable(int irq, void *dev_id)
-{
-	if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) {
-		printk(KERN_INFO "PM: Power cable connected\n");
-		irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
-				 IRQ_TYPE_EDGE_FALLING);
-	} else {
-		printk(KERN_INFO "PM: Power cable disconnected\n");
-		irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
-				 IRQ_TYPE_EDGE_RISING);
-	}
-	return IRQ_HANDLED;
-}
-
-static void __init
-omap_mpu_wdt_mode(int mode)
-{
-	if (mode)
-		omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
-	else {
-		omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
-		omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
-	}
-}
-
-static void __init
-palmz71_gpio_setup(int early)
-{
-	if (early) {
-		/* Only set GPIO1 so we have a working serial */
-		gpio_direction_output(1, 1);
-	} else {
-		/* Set MMC/SD host WP pin as input */
-		if (gpio_request(PALMZ71_MMC_WP_GPIO, "MMC WP") < 0) {
-			printk(KERN_ERR "Could not reserve WP GPIO!\n");
-			return;
-		}
-		gpio_direction_input(PALMZ71_MMC_WP_GPIO);
-
-		/* Monitor the Power-cable-connected signal */
-		if (gpio_request(PALMZ71_USBDETECT_GPIO, "USB detect") < 0) {
-			printk(KERN_ERR
-				"Could not reserve cable signal GPIO!\n");
-			return;
-		}
-		gpio_direction_input(PALMZ71_USBDETECT_GPIO);
-		if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
-				palmz71_powercable, 0, "palmz71-cable", NULL))
-			printk(KERN_ERR
-					"IRQ request for power cable failed!\n");
-		palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), NULL);
-	}
-}
-
-static void __init
-omap_palmz71_init(void)
-{
-	/* mux pins for uarts */
-	omap_cfg_reg(UART1_TX);
-	omap_cfg_reg(UART1_RTS);
-	omap_cfg_reg(UART2_TX);
-	omap_cfg_reg(UART2_RTS);
-	omap_cfg_reg(UART3_TX);
-	omap_cfg_reg(UART3_RX);
-
-	palmz71_gpio_setup(1);
-	omap_mpu_wdt_mode(0);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO);
-	spi_register_board_info(palmz71_boardinfo,
-				ARRAY_SIZE(palmz71_boardinfo));
-	omap1_usb_init(&palmz71_usb_config);
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-	palmz71_gpio_setup(0);
-
-	omapfb_set_lcd_config(&palmz71_lcd_config);
-}
-
-MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
-	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= omap_palmz71_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
deleted file mode 100644
index b041e6f6e9cf..000000000000
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ /dev/null
@@ -1,333 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-perseus2.c
- *
- * Modified from board-generic.c
- *
- * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
- * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-#include <linux/platform_data/keypad-omap.h>
-#include <linux/soc/ti/omap1-io.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "tc.h"
-#include "mux.h"
-#include "flash.h"
-#include "hardware.h"
-#include "iomap.h"
-#include "common.h"
-#include "fpga.h"
-
-static const unsigned int p2_keymap[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_LEFT),
-	KEY(3, 0, KEY_DOWN),
-	KEY(4, 0, KEY_ENTER),
-	KEY(0, 1, KEY_F10),
-	KEY(1, 1, KEY_SEND),
-	KEY(2, 1, KEY_END),
-	KEY(3, 1, KEY_VOLUMEDOWN),
-	KEY(4, 1, KEY_VOLUMEUP),
-	KEY(5, 1, KEY_RECORD),
-	KEY(0, 2, KEY_F9),
-	KEY(1, 2, KEY_3),
-	KEY(2, 2, KEY_6),
-	KEY(3, 2, KEY_9),
-	KEY(4, 2, KEY_KPDOT),
-	KEY(0, 3, KEY_BACK),
-	KEY(1, 3, KEY_2),
-	KEY(2, 3, KEY_5),
-	KEY(3, 3, KEY_8),
-	KEY(4, 3, KEY_0),
-	KEY(5, 3, KEY_KPSLASH),
-	KEY(0, 4, KEY_HOME),
-	KEY(1, 4, KEY_1),
-	KEY(2, 4, KEY_4),
-	KEY(3, 4, KEY_7),
-	KEY(4, 4, KEY_KPASTERISK),
-	KEY(5, 4, KEY_POWER),
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= H2P2_DBG_FPGA_ETHR_START,	/* Physical */
-		.end	= H2P2_DBG_FPGA_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_7XX_MPU_EXT_NIRQ,
-		.end	= 0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct mtd_partition nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* rest of flash is a file system */
-	{
-	      .name		= "rootfs",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	},
-};
-
-static struct physmap_flash_data nor_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= nor_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_partitions),
-};
-
-static struct resource nor_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nor_resource,
-};
-
-#define P2_NAND_RB_GPIO_PIN	62
-
-static int nand_dev_ready(struct nand_chip *chip)
-{
-	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
-}
-
-static struct platform_nand_data nand_data = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.options		= NAND_SAMSUNG_LP_OPTIONS,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= omap1_nand_cmd_ctl,
-		.dev_ready	= nand_dev_ready,
-	},
-};
-
-static struct resource nand_resource = {
-	.start		= OMAP_CS3_PHYS,
-	.end		= OMAP_CS3_PHYS + SZ_4K - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nand_device = {
-	.name		= "gen_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nand_resource,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource kp_resources[] = {
-	[0] = {
-		.start	= INT_7XX_MPUIO_KEYPAD,
-		.end	= INT_7XX_MPUIO_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data p2_keymap_data = {
-	.keymap		= p2_keymap,
-	.keymap_size	= ARRAY_SIZE(p2_keymap),
-};
-
-static struct omap_kp_platform_data kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &p2_keymap_data,
-	.delay		= 4,
-	.dbounce	= true,
-};
-
-static struct platform_device kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(kp_resources),
-	.resource	= kp_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&nor_device,
-	&nand_device,
-	&smc91x_device,
-	&kp_device,
-};
-
-static const struct omap_lcd_config perseus2_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-
-static void __init perseus2_init_smc91x(void)
-{
-	__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-	__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
-		   H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-}
-
-static void __init omap_perseus2_init(void)
-{
-	/* Early, board-dependent init */
-
-	/*
-	 * Hold GSM Reset until needed
-	 */
-	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
-
-	/*
-	 * UARTs -> done automagically by 8250 driver
-	 */
-
-	/*
-	 * CSx timings, GPIO Mux ... setup
-	 */
-
-	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
-
-	/*
-	 * Ethernet support through the debug board
-	 * CS1 timings setup
-	 */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
-
-	/*
-	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
-	 * It is used as the Ethernet controller interrupt
-	 */
-	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
-				OMAP7XX_IO_CONF_9);
-
-	perseus2_init_smc91x();
-
-	BUG_ON(gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
-	gpio_direction_input(P2_NAND_RB_GPIO_PIN);
-
-	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
-	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
-	/* Mux pins for keypad */
-	omap_cfg_reg(E2_7XX_KBR0);
-	omap_cfg_reg(J7_7XX_KBR1);
-	omap_cfg_reg(E1_7XX_KBR2);
-	omap_cfg_reg(F3_7XX_KBR3);
-	omap_cfg_reg(D2_7XX_KBR4);
-	omap_cfg_reg(C2_7XX_KBC0);
-	omap_cfg_reg(D3_7XX_KBC1);
-	omap_cfg_reg(E4_7XX_KBC2);
-	omap_cfg_reg(F4_7XX_KBC3);
-	omap_cfg_reg(E3_7XX_KBC4);
-
-	if (IS_ENABLED(CONFIG_SPI_OMAP_UWIRE)) {
-		/* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */
-		int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000;
-		omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9);
-	}
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	omapfb_set_lcd_config(&perseus2_lcd_config);
-}
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc omap_perseus2_io_desc[] __initdata = {
-	{
-		.virtual	= H2P2_DBG_FPGA_BASE,
-		.pfn		= __phys_to_pfn(H2P2_DBG_FPGA_START),
-		.length		= H2P2_DBG_FPGA_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init omap_perseus2_map_io(void)
-{
-	omap7xx_map_io();
-	iotable_init(omap_perseus2_io_desc,
-		     ARRAY_SIZE(omap_perseus2_io_desc));
-}
-
-MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
-	/* Maintainer: Kevin Hilman <kjh@hilman.org> */
-	.atag_offset	= 0x100,
-	.map_io		= omap_perseus2_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= omap_perseus2_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index f1c160924dfe..f183a8448a7b 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -9,7 +9,6 @@
  * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
  */
 
-#include <linux/gpio.h>
 #include <linux/platform_device.h>
 
 #include "hardware.h"
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index f0dbb0e8d8e7..b869c7ba1a1b 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -11,7 +11,8 @@
 * Maintainters : Vladimir Ananiev (aka Vovan888), Sergge
 *		oslik.ru
 */
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/input.h>
@@ -304,8 +305,23 @@ static struct platform_device *sx1_devices[] __initdata = {
 
 /*-----------------------------------------*/
 
+static struct gpiod_lookup_table sx1_gpio_table = {
+	.dev_id = NULL,
+	.table = {
+		GPIO_LOOKUP("gpio-0-15", 1, "irda_off",
+			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-0-15", 11, "switch",
+			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-0-15", 15, "usb_on",
+			    GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
 static void __init omap_sx1_init(void)
 {
+	struct gpio_desc *d;
+
 	/* mux pins for uarts */
 	omap_cfg_reg(UART1_TX);
 	omap_cfg_reg(UART1_RTS);
@@ -320,25 +336,34 @@ static void __init omap_sx1_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	omap1_usb_init(&sx1_usb_config);
 	sx1_mmc_init();
+	gpiod_add_lookup_table(&sx1_gpio_table);
 
 	/* turn on USB power */
 	/* sx1_setusbpower(1); can't do it here because i2c is not ready */
-	gpio_request(1, "A_IRDA_OFF");
-	gpio_request(11, "A_SWITCH");
-	gpio_request(15, "A_USB_ON");
-	gpio_direction_output(1, 1);	/*A_IRDA_OFF = 1 */
-	gpio_direction_output(11, 0);	/*A_SWITCH = 0 */
-	gpio_direction_output(15, 0);	/*A_USB_ON = 0 */
+	d = gpiod_get(NULL, "irda_off", GPIOD_OUT_HIGH);
+	if (IS_ERR(d))
+		pr_err("Unable to get IRDA OFF GPIO descriptor\n");
+	else
+		gpiod_put(d);
+	d = gpiod_get(NULL, "switch", GPIOD_OUT_LOW);
+	if (IS_ERR(d))
+		pr_err("Unable to get SWITCH GPIO descriptor\n");
+	else
+		gpiod_put(d);
+	d = gpiod_get(NULL, "usb_on", GPIOD_OUT_LOW);
+	if (IS_ERR(d))
+		pr_err("Unable to get USB ON GPIO descriptor\n");
+	else
+		gpiod_put(d);
 
 	omapfb_set_lcd_config(&sx1_lcd_config);
 }
 
 MACHINE_START(SX1, "OMAP310 based Siemens SX1")
 	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
+	.map_io		= omap1_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
 	.init_machine	= omap_sx1_init,
 	.init_late	= omap1_init_late,
 	.init_time	= omap1_timer_init,
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 83381e23fab9..afc6404f62d3 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -705,14 +705,21 @@ static unsigned long omap1_clk_recalc_rate(struct clk_hw *hw, unsigned long p_ra
 	return clk->rate;
 }
 
-static long omap1_clk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *p_rate)
+static int omap1_clk_determine_rate(struct clk_hw *hw,
+				    struct clk_rate_request *req)
 {
 	struct omap1_clk *clk = to_omap1_clk(hw);
 
-	if (clk->round_rate != NULL)
-		return clk->round_rate(clk, rate, p_rate);
+	if (clk->round_rate != NULL) {
+		req->rate = clk->round_rate(clk, req->rate,
+					    &req->best_parent_rate);
 
-	return omap1_clk_recalc_rate(hw, *p_rate);
+		return 0;
+	}
+
+	req->rate = omap1_clk_recalc_rate(hw, req->best_parent_rate);
+
+	return 0;
 }
 
 static int omap1_clk_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long p_rate)
@@ -771,7 +778,7 @@ const struct clk_ops omap1_clk_gate_ops = {
 
 const struct clk_ops omap1_clk_rate_ops = {
 	.recalc_rate	= omap1_clk_recalc_rate,
-	.round_rate	= omap1_clk_round_rate,
+	.determine_rate = omap1_clk_determine_rate,
 	.set_rate	= omap1_clk_set_rate,
 	.init		= omap1_clk_init_op,
 };
@@ -784,7 +791,7 @@ const struct clk_ops omap1_clk_full_ops = {
 	.disable_unused	= omap1_clk_disable_unused,
 #endif
 	.recalc_rate	= omap1_clk_recalc_rate,
-	.round_rate	= omap1_clk_round_rate,
+	.determine_rate = omap1_clk_determine_rate,
 	.set_rate	= omap1_clk_set_rate,
 	.init		= omap1_clk_init_op,
 };
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 96d846c37c43..c58d200e4816 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -720,8 +720,6 @@ int __init omap1_clk_init(void)
 		cpu_mask |= CK_16XX;
 	if (cpu_is_omap1510())
 		cpu_mask |= CK_1510;
-	if (cpu_is_omap7xx())
-		cpu_mask |= CK_7XX;
 	if (cpu_is_omap310())
 		cpu_mask |= CK_310;
 
@@ -730,9 +728,6 @@ int __init omap1_clk_init(void)
 	ck_dpll1_p = &ck_dpll1;
 	ck_ref_p = &ck_ref;
 
-	if (cpu_is_omap7xx())
-		ck_ref.rate = 13000000;
-
 	pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
 		omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
 		omap_readw(ARM_CKCTL));
@@ -771,12 +766,6 @@ int __init omap1_clk_init(void)
 		}
 	}
 
-	if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
-		/* Select slicer output as OMAP input clock */
-		omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
-				OMAP7XX_PCC_UPLD_CTRL);
-	}
-
 	/* Amstrad Delta wants BCLK high when inactive */
 	if (machine_is_ams_delta())
 		omap_writel(omap_readl(ULPD_CLOCK_CTRL) |
@@ -784,11 +773,7 @@ int __init omap1_clk_init(void)
 				ULPD_CLOCK_CTRL);
 
 	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
-	/* (on 730, bit 13 must not be cleared) */
-	if (cpu_is_omap7xx())
-		omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
-	else
-		omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
+	omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
 
 	/* Put DSP/MPUI into reset until needed */
 	omap_writew(0, ARM_RSTCT1);
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index 5ceff05e15c0..7a7c3d9eb84a 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -35,34 +35,6 @@
 #include "soc.h"
 #include "i2c.h"
 
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-void omap7xx_map_io(void);
-#else
-static inline void omap7xx_map_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-void omap1510_fpga_init_irq(void);
-void omap15xx_map_io(void);
-#else
-static inline void omap1510_fpga_init_irq(void)
-{
-}
-static inline void omap15xx_map_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP16XX
-void omap16xx_map_io(void);
-#else
-static inline void omap16xx_map_io(void)
-{
-}
-#endif
-
 #ifdef CONFIG_OMAP_SERIAL_WAKE
 int omap_serial_wakeup_init(void);
 #else
@@ -72,6 +44,7 @@ static inline int omap_serial_wakeup_init(void)
 }
 #endif
 
+void omap1_map_io(void);
 void omap1_init_early(void);
 void omap1_init_irq(void);
 void __exception_irq_entry omap1_handle_irq(struct pt_regs *regs);
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 80e94770582a..8b2c5f911e97 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -6,7 +6,6 @@
  */
 
 #include <linux/dma-mapping.h>
-#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -21,7 +20,6 @@
 #include "tc.h"
 #include "mux.h"
 
-#include "omap7xx.h"
 #include "hardware.h"
 #include "common.h"
 #include "clock.h"
@@ -63,8 +61,6 @@ static void omap_init_rtc(void)
 static inline void omap_init_rtc(void) {}
 #endif
 
-static inline void omap_init_mbox(void) { }
-
 /*-------------------------------------------------------------------------*/
 
 #if IS_ENABLED(CONFIG_MMC_OMAP)
@@ -73,22 +69,16 @@ static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			int controller_nr)
 {
 	if (controller_nr == 0) {
-		if (cpu_is_omap7xx()) {
-			omap_cfg_reg(MMC_7XX_CMD);
-			omap_cfg_reg(MMC_7XX_CLK);
-			omap_cfg_reg(MMC_7XX_DAT0);
-		} else {
-			omap_cfg_reg(MMC_CMD);
-			omap_cfg_reg(MMC_CLK);
-			omap_cfg_reg(MMC_DAT0);
-		}
+		omap_cfg_reg(MMC_CMD);
+		omap_cfg_reg(MMC_CLK);
+		omap_cfg_reg(MMC_DAT0);
 
 		if (cpu_is_omap1710()) {
 			omap_cfg_reg(M15_1710_MMC_CLKI);
 			omap_cfg_reg(P19_1710_MMC_CMDDIR);
 			omap_cfg_reg(P20_1710_MMC_DATDIR0);
 		}
-		if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) {
+		if (mmc_controller->slots[0].wires == 4) {
 			omap_cfg_reg(MMC_DAT1);
 			/* NOTE: DAT2 can be on W10 (here) or M15 */
 			if (!mmc_controller->slots[0].nomux)
@@ -154,8 +144,6 @@ static int __init omap_mmc_add(const char *name, int id, unsigned long base,
 	res[3].name = "tx";
 	res[3].flags = IORESOURCE_DMA;
 
-	if (cpu_is_omap7xx())
-		data->slots[0].features = MMC_OMAP7XX;
 	if (cpu_is_omap15xx())
 		data->slots[0].features = MMC_OMAP15XX;
 	if (cpu_is_omap16xx())
@@ -224,43 +212,6 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 
 /*-------------------------------------------------------------------------*/
 
-/* OMAP7xx SPI support */
-#if IS_ENABLED(CONFIG_SPI_OMAP_100K)
-
-struct platform_device omap_spi1 = {
-	.name           = "omap1_spi100k",
-	.id             = 1,
-};
-
-struct platform_device omap_spi2 = {
-	.name           = "omap1_spi100k",
-	.id             = 2,
-};
-
-static void omap_init_spi100k(void)
-{
-	if (!cpu_is_omap7xx())
-		return;
-
-	omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
-	if (omap_spi1.dev.platform_data)
-		platform_device_register(&omap_spi1);
-
-	omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
-	if (omap_spi2.dev.platform_data)
-		platform_device_register(&omap_spi2);
-}
-
-#else
-static inline void omap_init_spi100k(void)
-{
-}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-static inline void omap_init_sti(void) {}
-
 /* Numbering for the SPI-capable controllers when used for SPI:
  * spi		= 1
  * uwire	= 2
@@ -363,10 +314,7 @@ static int __init omap1_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 
-	omap_init_mbox();
 	omap_init_rtc();
-	omap_init_spi100k();
-	omap_init_sti();
 	omap_init_uwire();
 	omap1_init_rng();
 
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index c3f280c3c5d7..756966cb715f 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -261,22 +261,6 @@ static const struct platform_device_info omap_dma_dev_info = {
 	.num_res = 1,
 };
 
-/* OMAP730, OMAP850 */
-static const struct dma_slave_map omap7xx_sdma_map[] = {
-	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
-	{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) },
-	{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(10) },
-	{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(11) },
-	{ "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) },
-	{ "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) },
-	{ "omap_udc", "rx0", SDMA_FILTER_PARAM(26) },
-	{ "omap_udc", "rx1", SDMA_FILTER_PARAM(27) },
-	{ "omap_udc", "rx2", SDMA_FILTER_PARAM(28) },
-	{ "omap_udc", "tx0", SDMA_FILTER_PARAM(29) },
-	{ "omap_udc", "tx1", SDMA_FILTER_PARAM(30) },
-	{ "omap_udc", "tx2", SDMA_FILTER_PARAM(31) },
-};
-
 /* OMAP1510, OMAP1610*/
 static const struct dma_slave_map omap1xxx_sdma_map[] = {
 	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
@@ -371,13 +355,8 @@ static int __init omap1_system_dma_init(void)
 	p.dma_attr = d;
 	p.errata = configure_dma_errata();
 
-	if (cpu_is_omap7xx()) {
-		p.slave_map = omap7xx_sdma_map;
-		p.slavecnt = ARRAY_SIZE(omap7xx_sdma_map);
-	} else {
-		p.slave_map = omap1xxx_sdma_map;
-		p.slavecnt = ARRAY_SIZE(omap1xxx_sdma_map);
-	}
+	p.slave_map = omap1xxx_sdma_map;
+	p.slavecnt = ARRAY_SIZE(omap1xxx_sdma_map);
 
 	ret = platform_device_add_data(pdev, &p, sizeof(p));
 	if (ret) {
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
deleted file mode 100644
index 4c71a195969f..000000000000
--- a/arch/arm/mach-omap1/fpga.c
+++ /dev/null
@@ -1,186 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/fpga.c
- *
- * Interrupt handler for OMAP-1510 Innovator FPGA
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include "hardware.h"
-#include "iomap.h"
-#include "common.h"
-#include "fpga.h"
-
-static void fpga_mask_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;
-
-	if (irq < 8)
-		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO)
-			      & ~(1 << irq)), OMAP1510_FPGA_IMR_LO);
-	else if (irq < 16)
-		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI)
-			      & ~(1 << (irq - 8))), OMAP1510_FPGA_IMR_HI);
-	else
-		__raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2)
-			      & ~(1 << (irq - 16))), INNOVATOR_FPGA_IMR2);
-}
-
-
-static inline u32 get_fpga_unmasked_irqs(void)
-{
-	return
-		((__raw_readb(OMAP1510_FPGA_ISR_LO) &
-		  __raw_readb(OMAP1510_FPGA_IMR_LO))) |
-		((__raw_readb(OMAP1510_FPGA_ISR_HI) &
-		  __raw_readb(OMAP1510_FPGA_IMR_HI)) << 8) |
-		((__raw_readb(INNOVATOR_FPGA_ISR2) &
-		  __raw_readb(INNOVATOR_FPGA_IMR2)) << 16);
-}
-
-
-static void fpga_ack_irq(struct irq_data *d)
-{
-	/* Don't need to explicitly ACK FPGA interrupts */
-}
-
-static void fpga_unmask_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;
-
-	if (irq < 8)
-		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO) | (1 << irq)),
-		     OMAP1510_FPGA_IMR_LO);
-	else if (irq < 16)
-		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI)
-			      | (1 << (irq - 8))), OMAP1510_FPGA_IMR_HI);
-	else
-		__raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2)
-			      | (1 << (irq - 16))), INNOVATOR_FPGA_IMR2);
-}
-
-static void fpga_mask_ack_irq(struct irq_data *d)
-{
-	fpga_mask_irq(d);
-	fpga_ack_irq(d);
-}
-
-static void innovator_fpga_IRQ_demux(struct irq_desc *desc)
-{
-	u32 stat;
-	int fpga_irq;
-
-	stat = get_fpga_unmasked_irqs();
-
-	if (!stat)
-		return;
-
-	for (fpga_irq = OMAP_FPGA_IRQ_BASE;
-	     (fpga_irq < OMAP_FPGA_IRQ_END) && stat;
-	     fpga_irq++, stat >>= 1) {
-		if (stat & 1) {
-			generic_handle_irq(fpga_irq);
-		}
-	}
-}
-
-static struct irq_chip omap_fpga_irq_ack = {
-	.name		= "FPGA-ack",
-	.irq_ack	= fpga_mask_ack_irq,
-	.irq_mask	= fpga_mask_irq,
-	.irq_unmask	= fpga_unmask_irq,
-};
-
-
-static struct irq_chip omap_fpga_irq = {
-	.name		= "FPGA",
-	.irq_ack	= fpga_ack_irq,
-	.irq_mask	= fpga_mask_irq,
-	.irq_unmask	= fpga_unmask_irq,
-};
-
-/*
- * All of the FPGA interrupt request inputs except for the touchscreen are
- * edge-sensitive; the touchscreen is level-sensitive.  The edge-sensitive
- * interrupts are acknowledged as a side-effect of reading the interrupt
- * status register from the FPGA.  The edge-sensitive interrupt inputs
- * cause a problem with level interrupt requests, such as Ethernet.  The
- * problem occurs when a level interrupt request is asserted while its
- * interrupt input is masked in the FPGA, which results in a missed
- * interrupt.
- *
- * In an attempt to workaround the problem with missed interrupts, the
- * mask_ack routine for all of the FPGA interrupts has been changed from
- * fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt
- * being serviced is left unmasked.  We can do this because the FPGA cascade
- * interrupt is run with all interrupts masked.
- *
- * Limited testing indicates that this workaround appears to be effective
- * for the smc9194 Ethernet driver used on the Innovator.  It should work
- * on other FPGA interrupts as well, but any drivers that explicitly mask
- * interrupts at the interrupt controller via disable_irq/enable_irq
- * could pose a problem.
- */
-void omap1510_fpga_init_irq(void)
-{
-	int i, res;
-
-	__raw_writeb(0, OMAP1510_FPGA_IMR_LO);
-	__raw_writeb(0, OMAP1510_FPGA_IMR_HI);
-	__raw_writeb(0, INNOVATOR_FPGA_IMR2);
-
-	for (i = OMAP_FPGA_IRQ_BASE; i < OMAP_FPGA_IRQ_END; i++) {
-
-		if (i == OMAP1510_INT_FPGA_TS) {
-			/*
-			 * The touchscreen interrupt is level-sensitive, so
-			 * we'll use the regular mask_ack routine for it.
-			 */
-			irq_set_chip(i, &omap_fpga_irq_ack);
-		}
-		else {
-			/*
-			 * All FPGA interrupts except the touchscreen are
-			 * edge-sensitive, so we won't mask them.
-			 */
-			irq_set_chip(i, &omap_fpga_irq);
-		}
-
-		irq_set_handler(i, handle_edge_irq);
-		irq_clear_status_flags(i, IRQ_NOREQUEST);
-	}
-
-	/*
-	 * The FPGA interrupt line is connected to GPIO13. Claim this pin for
-	 * the ARM.
-	 *
-	 * NOTE: For general GPIO/MPUIO access and interrupts, please see
-	 * gpio.[ch]
-	 */
-	res = gpio_request(13, "FPGA irq");
-	if (res) {
-		pr_err("%s failed to get gpio\n", __func__);
-		return;
-	}
-	gpio_direction_input(13);
-	irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
-	irq_set_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
-}
diff --git a/arch/arm/mach-omap1/fpga.h b/arch/arm/mach-omap1/fpga.h
deleted file mode 100644
index 7e7450edacc1..000000000000
--- a/arch/arm/mach-omap1/fpga.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Interrupt handler for OMAP-1510 FPGA
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- */
-
-#ifndef __ASM_ARCH_OMAP_FPGA_H
-#define __ASM_ARCH_OMAP_FPGA_H
-
-/*
- * ---------------------------------------------------------------------------
- *  H2/P2 Debug board FPGA
- * ---------------------------------------------------------------------------
- */
-/* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE		0xE8000000		/* VA */
-#define H2P2_DBG_FPGA_SIZE		SZ_4K			/* SIZE */
-#define H2P2_DBG_FPGA_START		0x04000000		/* PA */
-
-#define H2P2_DBG_FPGA_ETHR_START	(H2P2_DBG_FPGA_START + 0x300)
-#define H2P2_DBG_FPGA_FPGA_REV		IOMEM(H2P2_DBG_FPGA_BASE + 0x10)	/* FPGA Revision */
-#define H2P2_DBG_FPGA_BOARD_REV		IOMEM(H2P2_DBG_FPGA_BASE + 0x12)	/* Board Revision */
-#define H2P2_DBG_FPGA_GPIO		IOMEM(H2P2_DBG_FPGA_BASE + 0x14)	/* GPIO outputs */
-#define H2P2_DBG_FPGA_LEDS		IOMEM(H2P2_DBG_FPGA_BASE + 0x16)	/* LEDs outputs */
-#define H2P2_DBG_FPGA_MISC_INPUTS	IOMEM(H2P2_DBG_FPGA_BASE + 0x18)	/* Misc inputs */
-#define H2P2_DBG_FPGA_LAN_STATUS	IOMEM(H2P2_DBG_FPGA_BASE + 0x1A)	/* LAN Status line */
-#define H2P2_DBG_FPGA_LAN_RESET		IOMEM(H2P2_DBG_FPGA_BASE + 0x1C)	/* LAN Reset line */
-
-/* LEDs definition on debug board (16 LEDs, all physically green) */
-#define H2P2_DBG_FPGA_LED_GREEN		(1 << 15)
-#define H2P2_DBG_FPGA_LED_AMBER		(1 << 14)
-#define H2P2_DBG_FPGA_LED_RED		(1 << 13)
-#define H2P2_DBG_FPGA_LED_BLUE		(1 << 12)
-/*  cpu0 load-meter LEDs */
-#define H2P2_DBG_FPGA_LOAD_METER	(1 << 0)	// A bit of fun on our board ...
-#define H2P2_DBG_FPGA_LOAD_METER_SIZE	11
-#define H2P2_DBG_FPGA_LOAD_METER_MASK	((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
-
-#define H2P2_DBG_FPGA_P2_LED_TIMER		(1 << 0)
-#define H2P2_DBG_FPGA_P2_LED_IDLE		(1 << 1)
-
-#endif
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index c675f11de99d..6724af4925f2 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -8,9 +8,9 @@
  *	Charulatha V <charu@ti.com>
  */
 
-#include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/soc/ti/omap1-soc.h>
+#include <asm/irq.h>
 
 #include "irqs.h"
 
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index cf052714b3f8..55acec22fef4 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -8,7 +8,6 @@
  *	Charulatha V <charu@ti.com>
  */
 
-#include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/soc/ti/omap1-io.h>
 
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
deleted file mode 100644
index c372b357eab4..000000000000
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ /dev/null
@@ -1,272 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * OMAP7xx specific gpio init
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
- *
- * Author:
- *	Charulatha V <charu@ti.com>
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include "irqs.h"
-#include "soc.h"
-
-#define OMAP7XX_GPIO1_BASE		0xfffbc000
-#define OMAP7XX_GPIO2_BASE		0xfffbc800
-#define OMAP7XX_GPIO3_BASE		0xfffbd000
-#define OMAP7XX_GPIO4_BASE		0xfffbd800
-#define OMAP7XX_GPIO5_BASE		0xfffbe000
-#define OMAP7XX_GPIO6_BASE		0xfffbe800
-#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
-
-/* mpu gpio */
-static struct resource omap7xx_mpu_gpio_resources[] = {
-	{
-		.start	= OMAP1_MPUIO_VBASE,
-		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_MPUIO,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
-	.revision	= USHRT_MAX,
-	.direction	= OMAP_MPUIO_IO_CNTL / 2,
-	.datain		= OMAP_MPUIO_INPUT_LATCH / 2,
-	.dataout	= OMAP_MPUIO_OUTPUT / 2,
-	.irqstatus	= OMAP_MPUIO_GPIO_INT / 2,
-	.irqenable	= OMAP_MPUIO_GPIO_MASKIT / 2,
-	.irqenable_inv	= true,
-	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE >> 1,
-};
-
-static struct omap_gpio_platform_data omap7xx_mpu_gpio_config = {
-	.is_mpuio		= true,
-	.bank_width		= 16,
-	.bank_stride		= 2,
-	.regs                   = &omap7xx_mpuio_regs,
-};
-
-static struct platform_device omap7xx_mpu_gpio = {
-	.name           = "omap_gpio",
-	.id             = 0,
-	.dev            = {
-		.platform_data = &omap7xx_mpu_gpio_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_mpu_gpio_resources),
-	.resource = omap7xx_mpu_gpio_resources,
-};
-
-/* gpio1 */
-static struct resource omap7xx_gpio1_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO1_BASE,
-		.end	= OMAP7XX_GPIO1_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
-	.revision	= USHRT_MAX,
-	.direction	= OMAP7XX_GPIO_DIR_CONTROL,
-	.datain		= OMAP7XX_GPIO_DATA_INPUT,
-	.dataout	= OMAP7XX_GPIO_DATA_OUTPUT,
-	.irqstatus	= OMAP7XX_GPIO_INT_STATUS,
-	.irqenable	= OMAP7XX_GPIO_INT_MASK,
-	.irqenable_inv	= true,
-	.irqctrl	= OMAP7XX_GPIO_INT_CONTROL,
-};
-
-static struct omap_gpio_platform_data omap7xx_gpio1_config = {
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio1 = {
-	.name           = "omap_gpio",
-	.id             = 1,
-	.dev            = {
-		.platform_data = &omap7xx_gpio1_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio1_resources),
-	.resource = omap7xx_gpio1_resources,
-};
-
-/* gpio2 */
-static struct resource omap7xx_gpio2_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO2_BASE,
-		.end	= OMAP7XX_GPIO2_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_platform_data omap7xx_gpio2_config = {
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio2 = {
-	.name           = "omap_gpio",
-	.id             = 2,
-	.dev            = {
-		.platform_data = &omap7xx_gpio2_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio2_resources),
-	.resource = omap7xx_gpio2_resources,
-};
-
-/* gpio3 */
-static struct resource omap7xx_gpio3_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO3_BASE,
-		.end	= OMAP7XX_GPIO3_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_platform_data omap7xx_gpio3_config = {
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio3 = {
-	.name           = "omap_gpio",
-	.id             = 3,
-	.dev            = {
-		.platform_data = &omap7xx_gpio3_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio3_resources),
-	.resource = omap7xx_gpio3_resources,
-};
-
-/* gpio4 */
-static struct resource omap7xx_gpio4_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO4_BASE,
-		.end	= OMAP7XX_GPIO4_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK4,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_platform_data omap7xx_gpio4_config = {
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio4 = {
-	.name           = "omap_gpio",
-	.id             = 4,
-	.dev            = {
-		.platform_data = &omap7xx_gpio4_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio4_resources),
-	.resource = omap7xx_gpio4_resources,
-};
-
-/* gpio5 */
-static struct resource omap7xx_gpio5_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO5_BASE,
-		.end	= OMAP7XX_GPIO5_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK5,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_platform_data omap7xx_gpio5_config = {
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio5 = {
-	.name           = "omap_gpio",
-	.id             = 5,
-	.dev            = {
-		.platform_data = &omap7xx_gpio5_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio5_resources),
-	.resource = omap7xx_gpio5_resources,
-};
-
-/* gpio6 */
-static struct resource omap7xx_gpio6_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO6_BASE,
-		.end	= OMAP7XX_GPIO6_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK6,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_platform_data omap7xx_gpio6_config = {
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio6 = {
-	.name           = "omap_gpio",
-	.id             = 6,
-	.dev            = {
-		.platform_data = &omap7xx_gpio6_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio6_resources),
-	.resource = omap7xx_gpio6_resources,
-};
-
-static struct platform_device *omap7xx_gpio_dev[] __initdata = {
-	&omap7xx_mpu_gpio,
-	&omap7xx_gpio1,
-	&omap7xx_gpio2,
-	&omap7xx_gpio3,
-	&omap7xx_gpio4,
-	&omap7xx_gpio5,
-	&omap7xx_gpio6,
-};
-
-/*
- * omap7xx_gpio_init needs to be done before
- * machine_init functions access gpio APIs.
- * Hence omap7xx_gpio_init is a postcore_initcall.
- */
-static int __init omap7xx_gpio_init(void)
-{
-	int i;
-
-	if (!cpu_is_omap7xx())
-		return -EINVAL;
-
-	for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++)
-		platform_device_register(omap7xx_gpio_dev[i]);
-
-	return 0;
-}
-postcore_initcall(omap7xx_gpio_init);
diff --git a/arch/arm/mach-omap1/hardware.h b/arch/arm/mach-omap1/hardware.h
index c228234a1ed4..0aa571c9e0eb 100644
--- a/arch/arm/mach-omap1/hardware.h
+++ b/arch/arm/mach-omap1/hardware.h
@@ -114,6 +114,10 @@ static inline u32 omap_cs3_phys(void)
 
 #define OMAP_IH1_BASE		0xfffecb00
 #define OMAP_IH2_BASE		0xfffe0000
+#define OMAP_IH2_0_BASE		(0xfffe0000)
+#define OMAP_IH2_1_BASE		(0xfffe0100)
+#define OMAP_IH2_2_BASE		(0xfffe0200)
+#define OMAP_IH2_3_BASE		(0xfffe0300)
 
 #define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
 #define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
@@ -131,6 +135,38 @@ static inline u32 omap_cs3_phys(void)
 #define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
 #define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
 
+#define OMAP_IH2_0_ITR		(OMAP_IH2_0_BASE + 0x00)
+#define OMAP_IH2_0_MIR		(OMAP_IH2_0_BASE + 0x04)
+#define OMAP_IH2_0_SIR_IRQ	(OMAP_IH2_0_BASE + 0x10)
+#define OMAP_IH2_0_SIR_FIQ	(OMAP_IH2_0_BASE + 0x14)
+#define OMAP_IH2_0_CONTROL	(OMAP_IH2_0_BASE + 0x18)
+#define OMAP_IH2_0_ILR0		(OMAP_IH2_0_BASE + 0x1c)
+#define OMAP_IH2_0_ISR		(OMAP_IH2_0_BASE + 0x9c)
+
+#define OMAP_IH2_1_ITR		(OMAP_IH2_1_BASE + 0x00)
+#define OMAP_IH2_1_MIR		(OMAP_IH2_1_BASE + 0x04)
+#define OMAP_IH2_1_SIR_IRQ	(OMAP_IH2_1_BASE + 0x10)
+#define OMAP_IH2_1_SIR_FIQ	(OMAP_IH2_1_BASE + 0x14)
+#define OMAP_IH2_1_CONTROL	(OMAP_IH2_1_BASE + 0x18)
+#define OMAP_IH2_1_ILR1		(OMAP_IH2_1_BASE + 0x1c)
+#define OMAP_IH2_1_ISR		(OMAP_IH2_1_BASE + 0x9c)
+
+#define OMAP_IH2_2_ITR		(OMAP_IH2_2_BASE + 0x00)
+#define OMAP_IH2_2_MIR		(OMAP_IH2_2_BASE + 0x04)
+#define OMAP_IH2_2_SIR_IRQ	(OMAP_IH2_2_BASE + 0x10)
+#define OMAP_IH2_2_SIR_FIQ	(OMAP_IH2_2_BASE + 0x14)
+#define OMAP_IH2_2_CONTROL	(OMAP_IH2_2_BASE + 0x18)
+#define OMAP_IH2_2_ILR2		(OMAP_IH2_2_BASE + 0x1c)
+#define OMAP_IH2_2_ISR		(OMAP_IH2_2_BASE + 0x9c)
+
+#define OMAP_IH2_3_ITR		(OMAP_IH2_3_BASE + 0x00)
+#define OMAP_IH2_3_MIR		(OMAP_IH2_3_BASE + 0x04)
+#define OMAP_IH2_3_SIR_IRQ	(OMAP_IH2_3_BASE + 0x10)
+#define OMAP_IH2_3_SIR_FIQ	(OMAP_IH2_3_BASE + 0x14)
+#define OMAP_IH2_3_CONTROL	(OMAP_IH2_3_BASE + 0x18)
+#define OMAP_IH2_3_ILR3		(OMAP_IH2_3_BASE + 0x1c)
+#define OMAP_IH2_3_ISR		(OMAP_IH2_3_BASE + 0x9c)
+
 #define IRQ_ITR_REG_OFFSET	0x00
 #define IRQ_MIR_REG_OFFSET	0x04
 #define IRQ_SIR_IRQ_REG_OFFSET	0x10
@@ -184,12 +220,16 @@ static inline u32 omap_cs3_phys(void)
 
 /*
  * ---------------------------------------------------------------------------
- * Processor specific defines
+ * DSP
  * ---------------------------------------------------------------------------
  */
 
-#include "omap7xx.h"
-#include "omap1510.h"
-#include "omap16xx.h"
+#define OMAP1_DSP_BASE		0xE0000000
+#define OMAP1_DSP_SIZE		0x28000
+#define OMAP1_DSP_START		0xE0000000
+
+#define OMAP1_DSPREG_BASE	0xE1000000
+#define OMAP1_DSPREG_SIZE	SZ_128K
+#define OMAP1_DSPREG_START	0xE1000000
 
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index 22f945360599..94d3e7883e02 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -25,13 +25,8 @@ static struct platform_device omap_i2c_devices[1] = {
 
 static void __init omap1_i2c_mux_pins(int bus_id)
 {
-	if (cpu_is_omap7xx()) {
-		omap_cfg_reg(I2C_7XX_SDA);
-		omap_cfg_reg(I2C_7XX_SCL);
-	} else {
-		omap_cfg_reg(I2C_SDA);
-		omap_cfg_reg(I2C_SCL);
-	}
+	omap_cfg_reg(I2C_SDA);
+	omap_cfg_reg(I2C_SCL);
 }
 
 int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
@@ -68,10 +63,7 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
 
 	/* how the cpu bus is wired up differs for 7xx only */
 
-	if (cpu_is_omap7xx())
-		pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
-	else
-		pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
+	pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
 
 	pdev->dev.platform_data = pdata;
 
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index d2db9b8aed3f..1f20fe99be57 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -22,94 +22,32 @@
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
  */
-static struct map_desc omap_io_desc[] __initdata = {
+static struct map_desc omap1_io_desc[] __initdata = {
 	{
 		.virtual	= OMAP1_IO_VIRT,
 		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
 		.length		= OMAP1_IO_SIZE,
 		.type		= MT_DEVICE
-	}
-};
-
-#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
-static struct map_desc omap7xx_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP7XX_DSP_BASE,
-		.pfn		= __phys_to_pfn(OMAP7XX_DSP_START),
-		.length		= OMAP7XX_DSP_SIZE,
-		.type		= MT_DEVICE
 	}, {
-		.virtual	= OMAP7XX_DSPREG_BASE,
-		.pfn		= __phys_to_pfn(OMAP7XX_DSPREG_START),
-		.length		= OMAP7XX_DSPREG_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-static struct map_desc omap1510_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP1510_DSP_BASE,
-		.pfn		= __phys_to_pfn(OMAP1510_DSP_START),
-		.length		= OMAP1510_DSP_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= OMAP1510_DSPREG_BASE,
-		.pfn		= __phys_to_pfn(OMAP1510_DSPREG_START),
-		.length		= OMAP1510_DSPREG_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-static struct map_desc omap16xx_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP16XX_DSP_BASE,
-		.pfn		= __phys_to_pfn(OMAP16XX_DSP_START),
-		.length		= OMAP16XX_DSP_SIZE,
+		.virtual	= OMAP1_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP1_DSP_START),
+		.length		= OMAP1_DSP_SIZE,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= OMAP16XX_DSPREG_BASE,
-		.pfn		= __phys_to_pfn(OMAP16XX_DSPREG_START),
-		.length		= OMAP16XX_DSPREG_SIZE,
+		.virtual	= OMAP1_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP1_DSPREG_START),
+		.length		= OMAP1_DSPREG_SIZE,
 		.type		= MT_DEVICE
 	}
 };
-#endif
 
 /*
  * Maps common IO regions for omap1
  */
-static void __init omap1_map_common_io(void)
-{
-	iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
-}
-
-#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
-void __init omap7xx_map_io(void)
-{
-	omap1_map_common_io();
-	iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-void __init omap15xx_map_io(void)
-{
-	omap1_map_common_io();
-	iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-void __init omap16xx_map_io(void)
+void __init omap1_map_io(void)
 {
-	omap1_map_common_io();
-	iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
+	iotable_init(omap1_io_desc, ARRAY_SIZE(omap1_io_desc));
 }
-#endif
 
 /*
  * Common low-level hardware init for omap1.
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 70868e9f19ac..bb1bc060ecd8 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -35,12 +35,13 @@
  * with this program; if not, write  to the Free Software Foundation, Inc.,
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/gpio.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/irqdomain.h>
 
 #include <asm/irq.h>
 #include <asm/exception.h>
@@ -110,14 +111,6 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger)
 	irq_bank_writel(val, bank, offset);
 }
 
-#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
-static struct omap_irq_bank omap7xx_irq_banks[] = {
-	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3f8e22f },
-	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb9c1f2 },
-	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0x800040f3 },
-};
-#endif
-
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_irq_bank omap1510_irq_banks[] = {
 	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3febfff },
@@ -194,12 +187,6 @@ void __init omap1_init_irq(void)
 	int i, j, irq_base;
 	unsigned long nr_irqs;
 
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	if (cpu_is_omap7xx()) {
-		irq_banks = omap7xx_irq_banks;
-		irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
-	}
-#endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		irq_banks = omap1510_irq_banks;
@@ -230,11 +217,10 @@ void __init omap1_init_irq(void)
 		pr_warn("Couldn't allocate IRQ numbers\n");
 		irq_base = 0;
 	}
-	omap_l2_irq = cpu_is_omap7xx() ? irq_base + 1 : irq_base;
+	omap_l2_irq = irq_base;
 	omap_l2_irq -= NR_IRQS_LEGACY;
 
-	domain = irq_domain_add_legacy(NULL, nr_irqs, irq_base, 0,
-				       &irq_domain_simple_ops, NULL);
+	domain = irq_domain_create_legacy(NULL, nr_irqs, irq_base, 0, &irq_domain_simple_ops, NULL);
 
 	pr_info("Total of %lu interrupts in %i interrupt banks\n",
 		nr_irqs, irq_bank_count);
@@ -249,10 +235,6 @@ void __init omap1_init_irq(void)
 	irq_bank_writel(0x03, 0, IRQ_CONTROL_REG_OFFSET);
 	irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET);
 
-	/* Enable interrupts in global mask */
-	if (cpu_is_omap7xx())
-		irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET);
-
 	/* Install the interrupt handlers for each bank */
 	for (i = 0; i < irq_bank_count; i++) {
 		for (j = i * 32; j < (i + 1) * 32; j++) {
@@ -271,4 +253,6 @@ void __init omap1_init_irq(void)
 		ct = irq_data_get_chip_type(d);
 		ct->chip.irq_unmask(d);
 	}
+
+	set_handle_irq(omap1_handle_irq);
 }
diff --git a/arch/arm/mach-omap1/irqs.h b/arch/arm/mach-omap1/irqs.h
index 2851acfe5ff3..3ab7050b1b6b 100644
--- a/arch/arm/mach-omap1/irqs.h
+++ b/arch/arm/mach-omap1/irqs.h
@@ -231,15 +231,6 @@
 #define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
 #define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
 
-/* External FPGA handles interrupts on Innovator boards */
-#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
-#ifdef	CONFIG_MACH_OMAP_INNOVATOR
-#define OMAP_FPGA_NR_IRQS	24
-#else
-#define OMAP_FPGA_NR_IRQS	0
-#endif
-#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
-
 #define OMAP_IRQ_BIT(irq)	(1 << ((irq - NR_IRQS_LEGACY) % 32))
 
 #ifdef CONFIG_FIQ
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 05c25c432449..37863bdce9ea 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -89,84 +89,6 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 #define OMAP1610_MCBSP2_BASE	0xfffb1000
 #define OMAP1610_MCBSP3_BASE	0xe1017000
 
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-struct resource omap7xx_mcbsp_res[][6] = {
-	{
-		{
-			.start = OMAP7XX_MCBSP1_BASE,
-			.end   = OMAP7XX_MCBSP1_BASE + SZ_256,
-			.flags = IORESOURCE_MEM,
-		},
-		{
-			.name  = "rx",
-			.start = INT_7XX_McBSP1RX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "tx",
-			.start = INT_7XX_McBSP1TX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "rx",
-			.start = 9,
-			.flags = IORESOURCE_DMA,
-		},
-		{
-			.name  = "tx",
-			.start = 8,
-			.flags = IORESOURCE_DMA,
-		},
-	},
-	{
-		{
-			.start = OMAP7XX_MCBSP2_BASE,
-			.end   = OMAP7XX_MCBSP2_BASE + SZ_256,
-			.flags = IORESOURCE_MEM,
-		},
-		{
-			.name  = "rx",
-			.start = INT_7XX_McBSP2RX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "tx",
-			.start = INT_7XX_McBSP2TX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "rx",
-			.start = 11,
-			.flags = IORESOURCE_DMA,
-		},
-		{
-			.name  = "tx",
-			.start = 10,
-			.flags = IORESOURCE_DMA,
-		},
-	},
-};
-
-#define omap7xx_mcbsp_res_0		omap7xx_mcbsp_res[0]
-
-static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
-	{
-		.ops		= &omap1_mcbsp_ops,
-	},
-	{
-		.ops		= &omap1_mcbsp_ops,
-	},
-};
-#define OMAP7XX_MCBSP_RES_SZ		ARRAY_SIZE(omap7xx_mcbsp_res[1])
-#define OMAP7XX_MCBSP_COUNT		ARRAY_SIZE(omap7xx_mcbsp_res)
-#else
-#define omap7xx_mcbsp_res_0		NULL
-#define omap7xx_mcbsp_pdata		NULL
-#define OMAP7XX_MCBSP_RES_SZ		0
-#define OMAP7XX_MCBSP_COUNT		0
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
 struct resource omap15xx_mcbsp_res[][6] = {
 	{
 		{
@@ -266,14 +188,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 };
 #define OMAP15XX_MCBSP_RES_SZ		ARRAY_SIZE(omap15xx_mcbsp_res[1])
 #define OMAP15XX_MCBSP_COUNT		ARRAY_SIZE(omap15xx_mcbsp_res)
-#else
-#define omap15xx_mcbsp_res_0		NULL
-#define omap15xx_mcbsp_pdata		NULL
-#define OMAP15XX_MCBSP_RES_SZ		0
-#define OMAP15XX_MCBSP_COUNT		0
-#endif
 
-#ifdef CONFIG_ARCH_OMAP16XX
 struct resource omap16xx_mcbsp_res[][6] = {
 	{
 		{
@@ -373,12 +288,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 };
 #define OMAP16XX_MCBSP_RES_SZ		ARRAY_SIZE(omap16xx_mcbsp_res[1])
 #define OMAP16XX_MCBSP_COUNT		ARRAY_SIZE(omap16xx_mcbsp_res)
-#else
-#define omap16xx_mcbsp_res_0		NULL
-#define omap16xx_mcbsp_pdata		NULL
-#define OMAP16XX_MCBSP_RES_SZ		0
-#define OMAP16XX_MCBSP_COUNT		0
-#endif
 
 static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
 			struct omap_mcbsp_platform_data *config, int size)
@@ -418,12 +327,6 @@ static int __init omap1_mcbsp_init(void)
 	if (!cpu_class_is_omap1())
 		return -ENODEV;
 
-	if (cpu_is_omap7xx())
-		omap_mcbsp_register_board_cfg(omap7xx_mcbsp_res_0,
-					OMAP7XX_MCBSP_RES_SZ,
-					omap7xx_mcbsp_pdata,
-					OMAP7XX_MCBSP_COUNT);
-
 	if (cpu_is_omap15xx())
 		omap_mcbsp_register_board_cfg(omap15xx_mcbsp_res_0,
 					OMAP15XX_MCBSP_RES_SZ,
diff --git a/arch/arm/mach-omap1/mtd-xip.h b/arch/arm/mach-omap1/mtd-xip.h
index 5ae312ff08a1..cbeda46dd526 100644
--- a/arch/arm/mach-omap1/mtd-xip.h
+++ b/arch/arm/mach-omap1/mtd-xip.h
@@ -42,11 +42,7 @@ static inline unsigned long xip_omap_mpu_timer_read(int nr)
  * (see linux/mtd/xip.h)
  */
 
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7)
-#else
 #define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
-#endif
 
 /*
  * xip_cpu_idle() is used when waiting for a delay equal or larger than
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 2d9458ff1d29..4456fbc8aa3d 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -21,52 +21,6 @@
 
 static struct omap_mux_cfg arch_mux_cfg;
 
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-static struct pin_config omap7xx_pins[] = {
-MUX_CFG_7XX("E2_7XX_KBR0",        12,   21,    0,   20,   1, 0)
-MUX_CFG_7XX("J7_7XX_KBR1",        12,   25,    0,   24,   1, 0)
-MUX_CFG_7XX("E1_7XX_KBR2",        12,   29,    0,   28,   1, 0)
-MUX_CFG_7XX("F3_7XX_KBR3",        13,    1,    0,    0,   1, 0)
-MUX_CFG_7XX("D2_7XX_KBR4",        13,    5,    0,    4,   1, 0)
-MUX_CFG_7XX("C2_7XX_KBC0",        13,    9,    0,    8,   1, 0)
-MUX_CFG_7XX("D3_7XX_KBC1",        13,   13,    0,   12,   1, 0)
-MUX_CFG_7XX("E4_7XX_KBC2",        13,   17,    0,   16,   1, 0)
-MUX_CFG_7XX("F4_7XX_KBC3",        13,   21,    0,   20,   1, 0)
-MUX_CFG_7XX("E3_7XX_KBC4",        13,   25,    0,   24,   1, 0)
-
-MUX_CFG_7XX("AA17_7XX_USB_DM",     2,   21,    0,   20,   0, 0)
-MUX_CFG_7XX("W16_7XX_USB_PU_EN",   2,   25,    0,   24,   0, 0)
-MUX_CFG_7XX("W17_7XX_USB_VBUSI",   2,   29,    6,   28,   1, 0)
-MUX_CFG_7XX("W18_7XX_USB_DMCK_OUT",3,    3,    1,    2,   0, 0)
-MUX_CFG_7XX("W19_7XX_USB_DCRST",   3,    7,    1,    6,   0, 0)
-
-/* MMC Pins */
-MUX_CFG_7XX("MMC_7XX_CMD",         2,    9,    0,    8,   1, 0)
-MUX_CFG_7XX("MMC_7XX_CLK",         2,   13,    0,   12,   1, 0)
-MUX_CFG_7XX("MMC_7XX_DAT0",        2,   17,    0,   16,   1, 0)
-
-/* I2C interface */
-MUX_CFG_7XX("I2C_7XX_SCL",         5,    1,    0,    0,   1, 0)
-MUX_CFG_7XX("I2C_7XX_SDA",         5,    5,    0,    0,   1, 0)
-
-/* SPI pins */
-MUX_CFG_7XX("SPI_7XX_1",           6,    5,    4,    4,   1, 0)
-MUX_CFG_7XX("SPI_7XX_2",           6,    9,    4,    8,   1, 0)
-MUX_CFG_7XX("SPI_7XX_3",           6,   13,    4,   12,   1, 0)
-MUX_CFG_7XX("SPI_7XX_4",           6,   17,    4,   16,   1, 0)
-MUX_CFG_7XX("SPI_7XX_5",           8,   25,    0,   24,   0, 0)
-MUX_CFG_7XX("SPI_7XX_6",           9,    5,    0,    4,   0, 0)
-
-/* UART pins */
-MUX_CFG_7XX("UART_7XX_1",          3,   21,    0,   20,   0, 0)
-MUX_CFG_7XX("UART_7XX_2",          8,    1,    6,    0,   0, 0)
-};
-#define OMAP7XX_PINS_SZ		ARRAY_SIZE(omap7xx_pins)
-#else
-#define omap7xx_pins		NULL
-#define OMAP7XX_PINS_SZ		0
-#endif	/* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
-
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
 static struct pin_config omap1xxx_pins[] = {
 /*
@@ -489,12 +443,6 @@ EXPORT_SYMBOL(omap_cfg_reg);
 
 int __init omap1_mux_init(void)
 {
-	if (cpu_is_omap7xx()) {
-		arch_mux_cfg.pins	= omap7xx_pins;
-		arch_mux_cfg.size	= OMAP7XX_PINS_SZ;
-		arch_mux_cfg.cfg_reg	= omap1_cfg_reg;
-	}
-
 	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
 		arch_mux_cfg.pins	= omap1xxx_pins;
 		arch_mux_cfg.size	= OMAP1XXX_PINS_SZ;
diff --git a/arch/arm/mach-omap1/omap-dma.c b/arch/arm/mach-omap1/omap-dma.c
index f7e62de427f3..aebe5e55ff60 100644
--- a/arch/arm/mach-omap1/omap-dma.c
+++ b/arch/arm/mach-omap1/omap-dma.c
@@ -59,19 +59,6 @@ static struct omap_dma_dev_attr *d;
 static int enable_1510_mode;
 static u32 errata;
 
-struct dma_link_info {
-	int *linked_dmach_q;
-	int no_of_lchs_linked;
-
-	int q_count;
-	int q_tail;
-	int q_head;
-
-	int chain_state;
-	int chain_mode;
-
-};
-
 static int dma_lch_count;
 static int dma_chan_count;
 static int omap_dma_reserve_channels;
@@ -833,7 +820,7 @@ exit_dma_irq_fail:
 	return ret;
 }
 
-static int omap_system_dma_remove(struct platform_device *pdev)
+static void omap_system_dma_remove(struct platform_device *pdev)
 {
 	int dma_irq, irq_rel = 0;
 
@@ -841,8 +828,6 @@ static int omap_system_dma_remove(struct platform_device *pdev)
 		dma_irq = platform_get_irq(pdev, irq_rel);
 		free_irq(dma_irq, (void *)(irq_rel + 1));
 	}
-
-	return 0;
 }
 
 static struct platform_driver omap_system_dma_driver = {
diff --git a/arch/arm/mach-omap1/omap1510.h b/arch/arm/mach-omap1/omap1510.h
deleted file mode 100644
index 3d235244bf5c..000000000000
--- a/arch/arm/mach-omap1/omap1510.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Hardware definitions for TI OMAP1510 processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_H
-#define __ASM_ARCH_OMAP15XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP1510_DSP_BASE	0xE0000000
-#define OMAP1510_DSP_SIZE	0x28000
-#define OMAP1510_DSP_START	0xE0000000
-
-#define OMAP1510_DSPREG_BASE	0xE1000000
-#define OMAP1510_DSPREG_SIZE	SZ_128K
-#define OMAP1510_DSPREG_START	0xE1000000
-
-#define OMAP1510_DSP_MMU_BASE	(0xfffed200)
-
-/*
- * ---------------------------------------------------------------------------
- *  OMAP-1510 FPGA
- * ---------------------------------------------------------------------------
- */
-#define OMAP1510_FPGA_BASE		0xE8000000		/* VA */
-#define OMAP1510_FPGA_SIZE		SZ_4K
-#define OMAP1510_FPGA_START		0x08000000		/* PA */
-
-/* Revision */
-#define OMAP1510_FPGA_REV_LOW			IOMEM(OMAP1510_FPGA_BASE + 0x0)
-#define OMAP1510_FPGA_REV_HIGH			IOMEM(OMAP1510_FPGA_BASE + 0x1)
-#define OMAP1510_FPGA_LCD_PANEL_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x2)
-#define OMAP1510_FPGA_LED_DIGIT			IOMEM(OMAP1510_FPGA_BASE + 0x3)
-#define INNOVATOR_FPGA_HID_SPI			IOMEM(OMAP1510_FPGA_BASE + 0x4)
-#define OMAP1510_FPGA_POWER			IOMEM(OMAP1510_FPGA_BASE + 0x5)
-
-/* Interrupt status */
-#define OMAP1510_FPGA_ISR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x6)
-#define OMAP1510_FPGA_ISR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x7)
-
-/* Interrupt mask */
-#define OMAP1510_FPGA_IMR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x8)
-#define OMAP1510_FPGA_IMR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x9)
-
-/* Reset registers */
-#define OMAP1510_FPGA_HOST_RESET		IOMEM(OMAP1510_FPGA_BASE + 0xa)
-#define OMAP1510_FPGA_RST			IOMEM(OMAP1510_FPGA_BASE + 0xb)
-
-#define OMAP1510_FPGA_AUDIO			IOMEM(OMAP1510_FPGA_BASE + 0xc)
-#define OMAP1510_FPGA_DIP			IOMEM(OMAP1510_FPGA_BASE + 0xe)
-#define OMAP1510_FPGA_FPGA_IO			IOMEM(OMAP1510_FPGA_BASE + 0xf)
-#define OMAP1510_FPGA_UART1			IOMEM(OMAP1510_FPGA_BASE + 0x14)
-#define OMAP1510_FPGA_UART2			IOMEM(OMAP1510_FPGA_BASE + 0x15)
-#define OMAP1510_FPGA_OMAP1510_STATUS		IOMEM(OMAP1510_FPGA_BASE + 0x16)
-#define OMAP1510_FPGA_BOARD_REV			IOMEM(OMAP1510_FPGA_BASE + 0x18)
-#define INNOVATOR_FPGA_CAM_USB_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20c)
-#define OMAP1510P1_PPT_DATA			IOMEM(OMAP1510_FPGA_BASE + 0x100)
-#define OMAP1510P1_PPT_STATUS			IOMEM(OMAP1510_FPGA_BASE + 0x101)
-#define OMAP1510P1_PPT_CONTROL			IOMEM(OMAP1510_FPGA_BASE + 0x102)
-
-#define OMAP1510_FPGA_TOUCHSCREEN		IOMEM(OMAP1510_FPGA_BASE + 0x204)
-
-#define INNOVATOR_FPGA_INFO			IOMEM(OMAP1510_FPGA_BASE + 0x205)
-#define INNOVATOR_FPGA_LCD_BRIGHT_LO		IOMEM(OMAP1510_FPGA_BASE + 0x206)
-#define INNOVATOR_FPGA_LCD_BRIGHT_HI		IOMEM(OMAP1510_FPGA_BASE + 0x207)
-#define INNOVATOR_FPGA_LED_GRN_LO		IOMEM(OMAP1510_FPGA_BASE + 0x208)
-#define INNOVATOR_FPGA_LED_GRN_HI		IOMEM(OMAP1510_FPGA_BASE + 0x209)
-#define INNOVATOR_FPGA_LED_RED_LO		IOMEM(OMAP1510_FPGA_BASE + 0x20a)
-#define INNOVATOR_FPGA_LED_RED_HI		IOMEM(OMAP1510_FPGA_BASE + 0x20b)
-#define INNOVATOR_FPGA_EXP_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20d)
-#define INNOVATOR_FPGA_ISR2			IOMEM(OMAP1510_FPGA_BASE + 0x20e)
-#define INNOVATOR_FPGA_IMR2			IOMEM(OMAP1510_FPGA_BASE + 0x210)
-
-#define OMAP1510_FPGA_ETHR_START		(OMAP1510_FPGA_START + 0x300)
-
-/*
- * Power up Giga UART driver, turn on HID clock.
- * Turn off BT power, since we're not using it and it
- * draws power.
- */
-#define OMAP1510_FPGA_RESET_VALUE		0x42
-
-#define OMAP1510_FPGA_PCR_IF_PD0		(1 << 7)
-#define OMAP1510_FPGA_PCR_COM2_EN		(1 << 6)
-#define OMAP1510_FPGA_PCR_COM1_EN		(1 << 5)
-#define OMAP1510_FPGA_PCR_EXP_PD0		(1 << 4)
-#define OMAP1510_FPGA_PCR_EXP_PD1		(1 << 3)
-#define OMAP1510_FPGA_PCR_48MHZ_CLK		(1 << 2)
-#define OMAP1510_FPGA_PCR_4MHZ_CLK		(1 << 1)
-#define OMAP1510_FPGA_PCR_RSRVD_BIT0		(1 << 0)
-
-/*
- * Innovator/OMAP1510 FPGA HID register bit definitions
- */
-#define OMAP1510_FPGA_HID_SCLK	(1<<0)	/* output */
-#define OMAP1510_FPGA_HID_MOSI	(1<<1)	/* output */
-#define OMAP1510_FPGA_HID_nSS	(1<<2)	/* output 0/1 chip idle/select */
-#define OMAP1510_FPGA_HID_nHSUS	(1<<3)	/* output 0/1 host active/suspended */
-#define OMAP1510_FPGA_HID_MISO	(1<<4)	/* input */
-#define OMAP1510_FPGA_HID_ATN	(1<<5)	/* input  0/1 chip idle/ATN */
-#define OMAP1510_FPGA_HID_rsrvd	(1<<6)
-#define OMAP1510_FPGA_HID_RESETn (1<<7)	/* output - 0/1 USAR reset/run */
-
-/* The FPGA IRQ is cascaded through GPIO_13 */
-#define OMAP1510_INT_FPGA		(IH_GPIO_BASE + 13)
-
-/* IRQ Numbers for interrupts muxed through the FPGA */
-#define OMAP1510_INT_FPGA_ATN		(OMAP_FPGA_IRQ_BASE + 0)
-#define OMAP1510_INT_FPGA_ACK		(OMAP_FPGA_IRQ_BASE + 1)
-#define OMAP1510_INT_FPGA2		(OMAP_FPGA_IRQ_BASE + 2)
-#define OMAP1510_INT_FPGA3		(OMAP_FPGA_IRQ_BASE + 3)
-#define OMAP1510_INT_FPGA4		(OMAP_FPGA_IRQ_BASE + 4)
-#define OMAP1510_INT_FPGA5		(OMAP_FPGA_IRQ_BASE + 5)
-#define OMAP1510_INT_FPGA6		(OMAP_FPGA_IRQ_BASE + 6)
-#define OMAP1510_INT_FPGA7		(OMAP_FPGA_IRQ_BASE + 7)
-#define OMAP1510_INT_FPGA8		(OMAP_FPGA_IRQ_BASE + 8)
-#define OMAP1510_INT_FPGA9		(OMAP_FPGA_IRQ_BASE + 9)
-#define OMAP1510_INT_FPGA10		(OMAP_FPGA_IRQ_BASE + 10)
-#define OMAP1510_INT_FPGA11		(OMAP_FPGA_IRQ_BASE + 11)
-#define OMAP1510_INT_FPGA12		(OMAP_FPGA_IRQ_BASE + 12)
-#define OMAP1510_INT_ETHER		(OMAP_FPGA_IRQ_BASE + 13)
-#define OMAP1510_INT_FPGAUART1		(OMAP_FPGA_IRQ_BASE + 14)
-#define OMAP1510_INT_FPGAUART2		(OMAP_FPGA_IRQ_BASE + 15)
-#define OMAP1510_INT_FPGA_TS		(OMAP_FPGA_IRQ_BASE + 16)
-#define OMAP1510_INT_FPGA17		(OMAP_FPGA_IRQ_BASE + 17)
-#define OMAP1510_INT_FPGA_CAM		(OMAP_FPGA_IRQ_BASE + 18)
-#define OMAP1510_INT_FPGA_RTC_A		(OMAP_FPGA_IRQ_BASE + 19)
-#define OMAP1510_INT_FPGA_RTC_B		(OMAP_FPGA_IRQ_BASE + 20)
-#define OMAP1510_INT_FPGA_CD		(OMAP_FPGA_IRQ_BASE + 21)
-#define OMAP1510_INT_FPGA22		(OMAP_FPGA_IRQ_BASE + 22)
-#define OMAP1510_INT_FPGA23		(OMAP_FPGA_IRQ_BASE + 23)
-
-#endif /*  __ASM_ARCH_OMAP15XX_H */
-
diff --git a/arch/arm/mach-omap1/omap16xx.h b/arch/arm/mach-omap1/omap16xx.h
deleted file mode 100644
index cd1c724869c7..000000000000
--- a/arch/arm/mach-omap1/omap16xx.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Hardware definitions for TI OMAP1610/5912/1710 processors.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP16XX_H
-#define __ASM_ARCH_OMAP16XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP16XX_DSP_BASE	0xE0000000
-#define OMAP16XX_DSP_SIZE	0x28000
-#define OMAP16XX_DSP_START	0xE0000000
-
-#define OMAP16XX_DSPREG_BASE	0xE1000000
-#define OMAP16XX_DSPREG_SIZE	SZ_128K
-#define OMAP16XX_DSPREG_START	0xE1000000
-
-#define OMAP16XX_SEC_BASE	0xFFFE4000
-#define OMAP16XX_SEC_DES	(OMAP16XX_SEC_BASE + 0x0000)
-#define OMAP16XX_SEC_SHA1MD5	(OMAP16XX_SEC_BASE + 0x0800)
-#define OMAP16XX_SEC_RNG	(OMAP16XX_SEC_BASE + 0x1000)
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#define OMAP_IH2_0_BASE		(0xfffe0000)
-#define OMAP_IH2_1_BASE		(0xfffe0100)
-#define OMAP_IH2_2_BASE		(0xfffe0200)
-#define OMAP_IH2_3_BASE		(0xfffe0300)
-
-#define OMAP_IH2_0_ITR		(OMAP_IH2_0_BASE + 0x00)
-#define OMAP_IH2_0_MIR		(OMAP_IH2_0_BASE + 0x04)
-#define OMAP_IH2_0_SIR_IRQ	(OMAP_IH2_0_BASE + 0x10)
-#define OMAP_IH2_0_SIR_FIQ	(OMAP_IH2_0_BASE + 0x14)
-#define OMAP_IH2_0_CONTROL	(OMAP_IH2_0_BASE + 0x18)
-#define OMAP_IH2_0_ILR0		(OMAP_IH2_0_BASE + 0x1c)
-#define OMAP_IH2_0_ISR		(OMAP_IH2_0_BASE + 0x9c)
-
-#define OMAP_IH2_1_ITR		(OMAP_IH2_1_BASE + 0x00)
-#define OMAP_IH2_1_MIR		(OMAP_IH2_1_BASE + 0x04)
-#define OMAP_IH2_1_SIR_IRQ	(OMAP_IH2_1_BASE + 0x10)
-#define OMAP_IH2_1_SIR_FIQ	(OMAP_IH2_1_BASE + 0x14)
-#define OMAP_IH2_1_CONTROL	(OMAP_IH2_1_BASE + 0x18)
-#define OMAP_IH2_1_ILR1		(OMAP_IH2_1_BASE + 0x1c)
-#define OMAP_IH2_1_ISR		(OMAP_IH2_1_BASE + 0x9c)
-
-#define OMAP_IH2_2_ITR		(OMAP_IH2_2_BASE + 0x00)
-#define OMAP_IH2_2_MIR		(OMAP_IH2_2_BASE + 0x04)
-#define OMAP_IH2_2_SIR_IRQ	(OMAP_IH2_2_BASE + 0x10)
-#define OMAP_IH2_2_SIR_FIQ	(OMAP_IH2_2_BASE + 0x14)
-#define OMAP_IH2_2_CONTROL	(OMAP_IH2_2_BASE + 0x18)
-#define OMAP_IH2_2_ILR2		(OMAP_IH2_2_BASE + 0x1c)
-#define OMAP_IH2_2_ISR		(OMAP_IH2_2_BASE + 0x9c)
-
-#define OMAP_IH2_3_ITR		(OMAP_IH2_3_BASE + 0x00)
-#define OMAP_IH2_3_MIR		(OMAP_IH2_3_BASE + 0x04)
-#define OMAP_IH2_3_SIR_IRQ	(OMAP_IH2_3_BASE + 0x10)
-#define OMAP_IH2_3_SIR_FIQ	(OMAP_IH2_3_BASE + 0x14)
-#define OMAP_IH2_3_CONTROL	(OMAP_IH2_3_BASE + 0x18)
-#define OMAP_IH2_3_ILR3		(OMAP_IH2_3_BASE + 0x1c)
-#define OMAP_IH2_3_ISR		(OMAP_IH2_3_BASE + 0x9c)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_ARM_IDLECT3	(CLKGEN_REG_BASE + 0x24)
-
-/*
- * ----------------------------------------------------------------------------
- * Pin configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV6	(1 << 8)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV7	(1 << 9)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV8	(1 << 10)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV9	(1 << 11)
-#define OMAP16XX_SUBLVDS_CONF_VALID	(1 << 13)
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP1610_RESET_CONTROL  0xfffe1140
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_SWITCH_BASE		 (0xfffbc800)
-#define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
-
-/* UART3 Registers Mapping through MPU bus */
-#define UART3_RHR               (OMAP1_UART3_BASE + 0)
-#define UART3_THR               (OMAP1_UART3_BASE + 0)
-#define UART3_DLL               (OMAP1_UART3_BASE + 0)
-#define UART3_IER               (OMAP1_UART3_BASE + 4)
-#define UART3_DLH               (OMAP1_UART3_BASE + 4)
-#define UART3_IIR               (OMAP1_UART3_BASE + 8)
-#define UART3_FCR               (OMAP1_UART3_BASE + 8)
-#define UART3_EFR               (OMAP1_UART3_BASE + 8)
-#define UART3_LCR               (OMAP1_UART3_BASE + 0x0C)
-#define UART3_MCR               (OMAP1_UART3_BASE + 0x10)
-#define UART3_XON1_ADDR1        (OMAP1_UART3_BASE + 0x10)
-#define UART3_XON2_ADDR2        (OMAP1_UART3_BASE + 0x14)
-#define UART3_LSR               (OMAP1_UART3_BASE + 0x14)
-#define UART3_TCR               (OMAP1_UART3_BASE + 0x18)
-#define UART3_MSR               (OMAP1_UART3_BASE + 0x18)
-#define UART3_XOFF1             (OMAP1_UART3_BASE + 0x18)
-#define UART3_XOFF2             (OMAP1_UART3_BASE + 0x1C)
-#define UART3_SPR               (OMAP1_UART3_BASE + 0x1C)
-#define UART3_TLR               (OMAP1_UART3_BASE + 0x1C)
-#define UART3_MDR1              (OMAP1_UART3_BASE + 0x20)
-#define UART3_MDR2              (OMAP1_UART3_BASE + 0x24)
-#define UART3_SFLSR             (OMAP1_UART3_BASE + 0x28)
-#define UART3_TXFLL             (OMAP1_UART3_BASE + 0x28)
-#define UART3_RESUME            (OMAP1_UART3_BASE + 0x2C)
-#define UART3_TXFLH             (OMAP1_UART3_BASE + 0x2C)
-#define UART3_SFREGL            (OMAP1_UART3_BASE + 0x30)
-#define UART3_RXFLL             (OMAP1_UART3_BASE + 0x30)
-#define UART3_SFREGH            (OMAP1_UART3_BASE + 0x34)
-#define UART3_RXFLH             (OMAP1_UART3_BASE + 0x34)
-#define UART3_BLR               (OMAP1_UART3_BASE + 0x38)
-#define UART3_ACREG             (OMAP1_UART3_BASE + 0x3C)
-#define UART3_DIV16             (OMAP1_UART3_BASE + 0x3C)
-#define UART3_SCR               (OMAP1_UART3_BASE + 0x40)
-#define UART3_SSR               (OMAP1_UART3_BASE + 0x44)
-#define UART3_EBLR              (OMAP1_UART3_BASE + 0x48)
-#define UART3_OSC_12M_SEL       (OMAP1_UART3_BASE + 0x4C)
-#define UART3_MVR               (OMAP1_UART3_BASE + 0x50)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* 32-bit Watchdog timer in OMAP 16XX */
-#define OMAP_16XX_WATCHDOG_BASE        (0xfffeb000)
-#define OMAP_16XX_WIDR         (OMAP_16XX_WATCHDOG_BASE + 0x00)
-#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
-#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
-#define OMAP_16XX_WCLR         (OMAP_16XX_WATCHDOG_BASE + 0x24)
-#define OMAP_16XX_WCRR         (OMAP_16XX_WATCHDOG_BASE + 0x28)
-#define OMAP_16XX_WLDR         (OMAP_16XX_WATCHDOG_BASE + 0x2c)
-#define OMAP_16XX_WTGR         (OMAP_16XX_WATCHDOG_BASE + 0x30)
-#define OMAP_16XX_WWPS         (OMAP_16XX_WATCHDOG_BASE + 0x34)
-#define OMAP_16XX_WSPR         (OMAP_16XX_WATCHDOG_BASE + 0x48)
-
-#define WCLR_PRE_SHIFT         5
-#define WCLR_PTV_SHIFT         2
-
-#define WWPS_W_PEND_WSPR       (1 << 4)
-#define WWPS_W_PEND_WTGR       (1 << 3)
-#define WWPS_W_PEND_WLDR       (1 << 2)
-#define WWPS_W_PEND_WCRR       (1 << 1)
-#define WWPS_W_PEND_WCLR       (1 << 0)
-
-#define WSPR_ENABLE_0          (0x0000bbbb)
-#define WSPR_ENABLE_1          (0x00004444)
-#define WSPR_DISABLE_0         (0x0000aaaa)
-#define WSPR_DISABLE_1         (0x00005555)
-
-#define OMAP16XX_DSP_MMU_BASE	(0xfffed200)
-#define OMAP16XX_MAILBOX_BASE	(0xfffcf000)
-
-#endif /*  __ASM_ARCH_OMAP16XX_H */
-
diff --git a/arch/arm/mach-omap1/omap7xx.h b/arch/arm/mach-omap1/omap7xx.h
deleted file mode 100644
index 63da994bc609..000000000000
--- a/arch/arm/mach-omap1/omap7xx.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * Hardware definitions for TI OMAP7XX processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net>
- * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP7XX_H
-#define __ASM_ARCH_OMAP7XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP7XX_DSP_BASE	0xE0000000
-#define OMAP7XX_DSP_SIZE	0x50000
-#define OMAP7XX_DSP_START	0xE0000000
-
-#define OMAP7XX_DSPREG_BASE	0xE1000000
-#define OMAP7XX_DSPREG_SIZE	SZ_128K
-#define OMAP7XX_DSPREG_START	0xE1000000
-
-#define OMAP7XX_SPI1_BASE	0xfffc0800
-#define OMAP7XX_SPI2_BASE	0xfffc1000
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX specific configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_CONFIG_BASE	0xfffe1000
-#define OMAP7XX_IO_CONF_0	0xfffe1070
-#define OMAP7XX_IO_CONF_1	0xfffe1074
-#define OMAP7XX_IO_CONF_2	0xfffe1078
-#define OMAP7XX_IO_CONF_3	0xfffe107c
-#define OMAP7XX_IO_CONF_4	0xfffe1080
-#define OMAP7XX_IO_CONF_5	0xfffe1084
-#define OMAP7XX_IO_CONF_6	0xfffe1088
-#define OMAP7XX_IO_CONF_7	0xfffe108c
-#define OMAP7XX_IO_CONF_8	0xfffe1090
-#define OMAP7XX_IO_CONF_9	0xfffe1094
-#define OMAP7XX_IO_CONF_10	0xfffe1098
-#define OMAP7XX_IO_CONF_11	0xfffe109c
-#define OMAP7XX_IO_CONF_12	0xfffe10a0
-#define OMAP7XX_IO_CONF_13	0xfffe10a4
-
-#define OMAP7XX_MODE_1		0xfffe1010
-#define OMAP7XX_MODE_2		0xfffe1014
-
-/* CSMI specials: in terms of base + offset */
-#define OMAP7XX_MODE2_OFFSET	0x14
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX traffic controller configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_FLASH_CFG_0	0xfffecc10
-#define OMAP7XX_FLASH_ACFG_0	0xfffecc50
-#define OMAP7XX_FLASH_CFG_1	0xfffecc14
-#define OMAP7XX_FLASH_ACFG_1	0xfffecc54
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX DSP control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_ICR_BASE	0xfffbb800
-#define OMAP7XX_DSP_M_CTL	0xfffbb804
-#define OMAP7XX_DSP_MMU_BASE	0xfffed200
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX PCC_UPLD configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_PCC_UPLD_CTRL_BASE	(0xfffe0900)
-#define OMAP7XX_PCC_UPLD_CTRL		(OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00)
-
-#endif /*  __ASM_ARCH_OMAP7XX_H */
-
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index fce7d2b572bf..6a5815aa05e6 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -69,7 +69,6 @@
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
 static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
-static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE];
 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
 
@@ -166,10 +165,7 @@ static void omap_pm_wakeup_setup(void)
 	 * drivers must still separately call omap_set_gpio_wakeup() to
 	 * wake up to a GPIO interrupt.
 	 */
-	if (cpu_is_omap7xx())
-		level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) |
-			OMAP_IRQ_BIT(INT_7XX_IH2_IRQ);
-	else if (cpu_is_omap15xx())
+	if (cpu_is_omap15xx())
 		level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
 			OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
 	else if (cpu_is_omap16xx())
@@ -178,12 +174,7 @@ static void omap_pm_wakeup_setup(void)
 
 	omap_writel(~level1_wake, OMAP_IH1_MIR);
 
-	if (cpu_is_omap7xx()) {
-		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
-		omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) |
-				OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)),
-				OMAP_IH2_1_MIR);
-	} else if (cpu_is_omap15xx()) {
+	if (cpu_is_omap15xx()) {
 		level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
 		omap_writel(~level2_wake,  OMAP_IH2_MIR);
 	} else if (cpu_is_omap16xx()) {
@@ -236,17 +227,7 @@ void omap1_pm_suspend(void)
 	 * Save interrupt, MPUI, ARM and UPLD control registers.
 	 */
 
-	if (cpu_is_omap7xx()) {
-		MPUI7XX_SAVE(OMAP_IH1_MIR);
-		MPUI7XX_SAVE(OMAP_IH2_0_MIR);
-		MPUI7XX_SAVE(OMAP_IH2_1_MIR);
-		MPUI7XX_SAVE(MPUI_CTRL);
-		MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI7XX_SAVE(EMIFS_CONFIG);
-		MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
-
-	} else if (cpu_is_omap15xx()) {
+	if (cpu_is_omap15xx()) {
 		MPUI1510_SAVE(OMAP_IH1_MIR);
 		MPUI1510_SAVE(OMAP_IH2_MIR);
 		MPUI1510_SAVE(MPUI_CTRL);
@@ -288,9 +269,8 @@ void omap1_pm_suspend(void)
 	/* stop DSP */
 	omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
 
-		/* shut down dsp_ck */
-	if (!cpu_is_omap7xx())
-		omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
+	/* shut down dsp_ck */
+	omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
 
 	/* temporarily enabling api_ck to access DSP registers */
 	omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);
@@ -366,13 +346,7 @@ void omap1_pm_suspend(void)
 	ULPD_RESTORE(ULPD_CLOCK_CTRL);
 	ULPD_RESTORE(ULPD_STATUS_REQ);
 
-	if (cpu_is_omap7xx()) {
-		MPUI7XX_RESTORE(EMIFS_CONFIG);
-		MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG);
-		MPUI7XX_RESTORE(OMAP_IH1_MIR);
-		MPUI7XX_RESTORE(OMAP_IH2_0_MIR);
-		MPUI7XX_RESTORE(OMAP_IH2_1_MIR);
-	} else if (cpu_is_omap15xx()) {
+	if (cpu_is_omap15xx()) {
 		MPUI1510_RESTORE(MPUI_CTRL);
 		MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
 		MPUI1510_RESTORE(MPUI_DSP_API_CONFIG);
@@ -433,14 +407,7 @@ static int omap_pm_debug_show(struct seq_file *m, void *v)
 	ULPD_SAVE(ULPD_DPLL_CTRL);
 	ULPD_SAVE(ULPD_POWER_CTRL);
 
-	if (cpu_is_omap7xx()) {
-		MPUI7XX_SAVE(MPUI_CTRL);
-		MPUI7XX_SAVE(MPUI_DSP_STATUS);
-		MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
-		MPUI7XX_SAVE(EMIFS_CONFIG);
-	} else if (cpu_is_omap15xx()) {
+	if (cpu_is_omap15xx()) {
 		MPUI1510_SAVE(MPUI_CTRL);
 		MPUI1510_SAVE(MPUI_DSP_STATUS);
 		MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
@@ -486,21 +453,7 @@ static int omap_pm_debug_show(struct seq_file *m, void *v)
 		   ULPD_SHOW(ULPD_STATUS_REQ),
 		   ULPD_SHOW(ULPD_POWER_CTRL));
 
-	if (cpu_is_omap7xx()) {
-		seq_printf(m,
-			   "MPUI7XX_CTRL_REG	     0x%-8x \n"
-			   "MPUI7XX_DSP_STATUS_REG:      0x%-8x \n"
-			   "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
-			   "MPUI7XX_DSP_API_CONFIG_REG:  0x%-8x \n"
-			   "MPUI7XX_SDRAM_CONFIG_REG:    0x%-8x \n"
-			   "MPUI7XX_EMIFS_CONFIG_REG:    0x%-8x \n",
-			   MPUI7XX_SHOW(MPUI_CTRL),
-			   MPUI7XX_SHOW(MPUI_DSP_STATUS),
-			   MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG),
-			   MPUI7XX_SHOW(MPUI_DSP_API_CONFIG),
-			   MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG),
-			   MPUI7XX_SHOW(EMIFS_CONFIG));
-	} else if (cpu_is_omap15xx()) {
+	if (cpu_is_omap15xx()) {
 		seq_printf(m,
 			   "MPUI1510_CTRL_REG             0x%-8x \n"
 			   "MPUI1510_DSP_STATUS_REG:      0x%-8x \n"
@@ -634,10 +587,7 @@ static int __init omap_pm_init(void)
 	 * These routines need to be in SRAM as that's the only
 	 * memory the MPU can see when it wakes up.
 	 */
-	if (cpu_is_omap7xx()) {
-		omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend,
-						   omap7xx_cpu_suspend_sz);
-	} else if (cpu_is_omap15xx()) {
+	if (cpu_is_omap15xx()) {
 		omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
 						   omap1510_cpu_suspend_sz);
 	} else if (cpu_is_omap16xx()) {
@@ -652,9 +602,7 @@ static int __init omap_pm_init(void)
 
 	arm_pm_idle = omap1_pm_idle;
 
-	if (cpu_is_omap7xx())
-		irq = INT_7XX_WAKE_UP_REQ;
-	else if (cpu_is_omap16xx())
+	if (cpu_is_omap16xx())
 		irq = INT_1610_WAKE_UP_REQ;
 	else
 		irq = -1;
@@ -673,9 +621,7 @@ static int __init omap_pm_init(void)
 	omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
 
 	/* Configure IDLECT3 */
-	if (cpu_is_omap7xx())
-		omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3);
-	else if (cpu_is_omap16xx())
+	if (cpu_is_omap16xx())
 		omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
 
 	suspend_set_ops(&omap_pm_ops);
@@ -686,7 +632,7 @@ static int __init omap_pm_init(void)
 
 	error = sysfs_create_file(power_kobj, &sleep_while_idle_attr.attr);
 	if (error)
-		printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
+		pr_err("sysfs_create_file failed: %d\n", error);
 
 	if (cpu_is_omap16xx()) {
 		/* configure LOW_PWR pin */
diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h
index d9165709c532..b2763fb097ea 100644
--- a/arch/arm/mach-omap1/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -100,19 +100,6 @@
 #define OMAP1610_IDLECT3		0xfffece24
 #define OMAP1610_IDLE_LOOP_REQUEST	0x0400
 
-#define OMAP7XX_IDLECT1_SLEEP_VAL	0x16c7
-#define OMAP7XX_IDLECT2_SLEEP_VAL	0x09c7
-#define OMAP7XX_IDLECT3_VAL		0x3f
-#define OMAP7XX_IDLECT3		0xfffece24
-#define OMAP7XX_IDLE_LOOP_REQUEST	0x0C00
-
-#if     !defined(CONFIG_ARCH_OMAP730) && \
-	!defined(CONFIG_ARCH_OMAP850) && \
-	!defined(CONFIG_ARCH_OMAP15XX) && \
-	!defined(CONFIG_ARCH_OMAP16XX)
-#warning "Power management for this processor not implemented yet"
-#endif
-
 #ifndef __ASSEMBLER__
 
 #include <linux/clk.h>
@@ -125,19 +112,11 @@ extern void allow_idle_sleep(void);
 extern void omap1_pm_idle(void);
 extern void omap1_pm_suspend(void);
 
-extern void omap7xx_cpu_suspend(unsigned long, unsigned long);
 extern void omap1510_cpu_suspend(unsigned long, unsigned long);
 extern void omap1610_cpu_suspend(unsigned long, unsigned long);
-extern void omap7xx_idle_loop_suspend(void);
-extern void omap1510_idle_loop_suspend(void);
-extern void omap1610_idle_loop_suspend(void);
 
-extern unsigned int omap7xx_cpu_suspend_sz;
 extern unsigned int omap1510_cpu_suspend_sz;
 extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap7xx_idle_loop_suspend_sz;
-extern unsigned int omap1510_idle_loop_suspend_sz;
-extern unsigned int omap1610_idle_loop_suspend_sz;
 
 #ifdef CONFIG_OMAP_SERIAL_WAKE
 extern void omap_serial_wake_trigger(int enable);
@@ -158,10 +137,6 @@ extern void omap_serial_wake_trigger(int enable);
 #define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
 #define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
 
-#define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x))
-#define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]
-
 #define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
 #define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
 #define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
@@ -235,27 +210,6 @@ enum mpui1510_save_state {
 #endif
 };
 
-enum mpui7xx_save_state {
-	MPUI7XX_SLEEP_SAVE_START = 0,
-	/*
-	 * MPUI registers 32 bits
-	 */
-	MPUI7XX_SLEEP_SAVE_MPUI_CTRL,
-	MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
-	MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
-	MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS,
-	MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
-	MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG,
-	MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR,
-	MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR,
-	MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR,
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	MPUI7XX_SLEEP_SAVE_SIZE
-#else
-	MPUI7XX_SLEEP_SAVE_SIZE = 0
-#endif
-};
-
 enum mpui1610_save_state {
 	MPUI1610_SLEEP_SAVE_START = 0,
 	/*
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 88928fc33b2e..ffa4a9bece1e 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -4,7 +4,8 @@
  *
  * OMAP1 serial support.
  */
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -19,6 +20,7 @@
 
 #include <asm/mach-types.h>
 
+#include "common.h"
 #include "serial.h"
 #include "mux.h"
 #include "pm.h"
@@ -106,13 +108,6 @@ void __init omap_serial_init(void)
 {
 	int i;
 
-	if (cpu_is_omap7xx()) {
-		serial_platform_data[0].regshift = 0;
-		serial_platform_data[1].regshift = 0;
-		serial_platform_data[0].irq = INT_7XX_UART_MODEM_1;
-		serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2;
-	}
-
 	if (cpu_is_omap15xx()) {
 		serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
 		serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
@@ -120,14 +115,6 @@ void __init omap_serial_init(void)
 	}
 
 	for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) {
-
-		/* Don't look at UARTs higher than 2 for omap7xx */
-		if (cpu_is_omap7xx() && i > 1) {
-			serial_platform_data[i].membase = NULL;
-			serial_platform_data[i].mapbase = 0;
-			continue;
-		}
-
 		/* Static mapping, never released */
 		serial_platform_data[i].membase =
 			ioremap(serial_platform_data[i].mapbase, SZ_2K);
@@ -211,39 +198,38 @@ void omap_serial_wake_trigger(int enable)
 	}
 }
 
-static void __init omap_serial_set_port_wakeup(int gpio_nr)
+static void __init omap_serial_set_port_wakeup(int idx)
 {
+	struct gpio_desc *d;
 	int ret;
 
-	ret = gpio_request(gpio_nr, "UART wake");
-	if (ret < 0) {
-		printk(KERN_ERR "Could not request UART wake GPIO: %i\n",
-		       gpio_nr);
+	d = gpiod_get_index(NULL, "wakeup", idx, GPIOD_IN);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get UART wakeup GPIO descriptor\n");
 		return;
 	}
-	gpio_direction_input(gpio_nr);
-	ret = request_irq(gpio_to_irq(gpio_nr), &omap_serial_wake_interrupt,
+	ret = request_irq(gpiod_to_irq(d), &omap_serial_wake_interrupt,
 			  IRQF_TRIGGER_RISING, "serial wakeup", NULL);
 	if (ret) {
-		gpio_free(gpio_nr);
-		printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n",
-		       gpio_nr);
+		gpiod_put(d);
+		pr_err("No interrupt for UART%d wake GPIO\n", idx + 1);
 		return;
 	}
-	enable_irq_wake(gpio_to_irq(gpio_nr));
+	enable_irq_wake(gpiod_to_irq(d));
 }
 
+
 int __init omap_serial_wakeup_init(void)
 {
 	if (!cpu_is_omap16xx())
 		return 0;
 
 	if (uart1_ck != NULL)
-		omap_serial_set_port_wakeup(37);
+		omap_serial_set_port_wakeup(0);
 	if (uart2_ck != NULL)
-		omap_serial_set_port_wakeup(18);
+		omap_serial_set_port_wakeup(1);
 	if (uart3_ck != NULL)
-		omap_serial_set_port_wakeup(49);
+		omap_serial_set_port_wakeup(2);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index f111b79512ce..6192f52d531a 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -61,86 +61,6 @@
  *
  */
 
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	.align	3
-ENTRY(omap7xx_cpu_suspend)
-
-	@ save registers on stack
-	stmfd	sp!, {r0 - r12, lr}
-
-	@ Drain write cache
-	mov	r4, #0
-	mcr	p15, 0, r0, c7, c10, 4
-	nop
-
-	@ load base address of Traffic Controller
-	mov	r6, #TCMIF_ASM_BASE & 0xff000000
-	orr	r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
-	orr	r6, r6, #TCMIF_ASM_BASE & 0x0000ff00
-
-	@ prepare to put SDRAM into self-refresh manually
-	ldr	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-	orr	r9, r7, #SELF_REFRESH_MODE & 0xff000000
-	orr	r9, r9, #SELF_REFRESH_MODE & 0x000000ff
-	str	r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-
-	@ prepare to put EMIFS to Sleep
-	ldr	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-	orr	r9, r8, #IDLE_EMIFS_REQUEST & 0xff
-	str	r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-
-	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
-	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
-	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
-	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
-
-	@ turn off clock domains
-	@ do not disable PERCK (0x04)
-	mov	r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff
-	orr	r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00
-	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-
-	@ request ARM idle
-	mov	r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff
-	orr	r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00
-	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
-
-	@ disable instruction cache
-	mrc	p15, 0, r9, c1, c0, 0
-	bic	r2, r9, #0x1000
-	mcr	p15, 0, r2, c1, c0, 0
-	nop
-
-/*
- * Let's wait for the next wake up event to wake us up. r0 can't be
- * used here because r0 holds ARM_IDLECT1
- */
-	mov	r2, #0
-	mcr	p15, 0, r2, c7, c0, 4		@ wait for interrupt
-/*
- * omap7xx_cpu_suspend()'s resume point.
- *
- * It will just start executing here, so we'll restore stuff from the
- * stack.
- */
-	@ re-enable Icache
-	mcr	p15, 0, r9, c1, c0, 0
-
-	@ reset the ARM_IDLECT1 and ARM_IDLECT2.
-	strh	r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-	strh	r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
-
-	@ Restore EMIFF controls
-	str	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-	str	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-
-	@ restore regs and return
-	ldmfd	sp!, {r0 - r12, pc}
-
-ENTRY(omap7xx_cpu_suspend_sz)
-	.word	. - omap7xx_cpu_suspend
-#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
-
 #ifdef CONFIG_ARCH_OMAP15XX
 	.align	3
 ENTRY(omap1510_cpu_suspend)
diff --git a/arch/arm/mach-omap1/sram-init.c b/arch/arm/mach-omap1/sram-init.c
index 27c42e2a21cc..736a72a2b184 100644
--- a/arch/arm/mach-omap1/sram-init.c
+++ b/arch/arm/mach-omap1/sram-init.c
@@ -10,11 +10,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/set_memory.h>
 
 #include <asm/fncpy.h>
 #include <asm/tlb.h>
 #include <asm/cacheflush.h>
-#include <asm/set_memory.h>
 
 #include <asm/mach/map.h>
 
@@ -23,7 +23,7 @@
 
 #define OMAP1_SRAM_PA		0x20000000
 #define SRAM_BOOTLOADER_SZ	0x80
-#define ROUND_DOWN(value,boundary)	((value) & (~((boundary)-1)))
+#define ROUND_DOWN(value, boundary)	((value) & (~((boundary) - 1)))
 
 static void __iomem *omap_sram_base;
 static unsigned long omap_sram_start;
@@ -74,8 +74,7 @@ void *omap_sram_push(void *funcp, unsigned long size)
 
 	dst = fncpy(sram, funcp, size);
 
-	set_memory_ro(base, pages);
-	set_memory_x(base, pages);
+	set_memory_rox(base, pages);
 
 	return dst;
 }
@@ -95,9 +94,7 @@ static void __init omap_detect_and_map_sram(void)
 	omap_sram_skip = SRAM_BOOTLOADER_SZ;
 	omap_sram_start = OMAP1_SRAM_PA;
 
-	if (cpu_is_omap7xx())
-		omap_sram_size = 0x32000;	/* 200K */
-	else if (cpu_is_omap15xx())
+	if (cpu_is_omap15xx())
 		omap_sram_size = 0x30000;	/* 192K */
 	else if (cpu_is_omap1610() || cpu_is_omap1611() ||
 			cpu_is_omap1621() || cpu_is_omap1710())
@@ -126,8 +123,7 @@ static void __init omap_detect_and_map_sram(void)
 	base = (unsigned long)omap_sram_base;
 	pages = PAGE_ALIGN(omap_sram_size) / PAGE_SIZE;
 
-	set_memory_ro(base, pages);
-	set_memory_x(base, pages);
+	set_memory_rox(base, pages);
 }
 
 static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
@@ -135,9 +131,6 @@ static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
 void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
 {
 	BUG_ON(!_omap_sram_reprogram_clock);
-	/* On 730, bit 13 must always be 1 */
-	if (cpu_is_omap7xx())
-		ckctl |= 0x2000;
 	_omap_sram_reprogram_clock(dpllctl, ckctl);
 }
 
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index f5cd4bbf7566..81a912c1145a 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -158,7 +158,7 @@ err_free_pdata:
 	kfree(pdata);
 
 err_free_pdev:
-	platform_device_unregister(pdev);
+	platform_device_put(pdev);
 
 	return ret;
 }
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 410d17d1d443..f618a6df2938 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -176,17 +176,18 @@ static u64 notrace omap_32k_read_sched_clock(void)
 	return sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0;
 }
 
+static struct timespec64 persistent_ts;
+static cycles_t cycles;
+static unsigned int persistent_mult, persistent_shift;
+
 /**
  * omap_read_persistent_clock64 -  Return time from a persistent clock.
+ * @ts: &struct timespec64 for the returned time
  *
  * Reads the time from a source which isn't disabled during PM, the
  * 32k sync timer.  Convert the cycles elapsed since last read into
  * nsecs and adds to a monotonically increasing timespec64.
  */
-static struct timespec64 persistent_ts;
-static cycles_t cycles;
-static unsigned int persistent_mult, persistent_shift;
-
 static void omap_read_persistent_clock64(struct timespec64 *ts)
 {
 	unsigned long long nsecs;
@@ -206,10 +207,9 @@ static void omap_read_persistent_clock64(struct timespec64 *ts)
 /**
  * omap_init_clocksource_32k - setup and register counter 32k as a
  * kernel clocksource
- * @pbase: base addr of counter_32k module
- * @size: size of counter_32k to map
+ * @vbase: base addr of counter_32k module
  *
- * Returns 0 upon success or negative error code upon failure.
+ * Returns: %0 upon success or negative error code upon failure.
  *
  */
 static int __init omap_init_clocksource_32k(void __iomem *vbase)
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 0119f3ddb7a6..08d42abc4a0f 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -190,12 +190,6 @@ static struct platform_device udc_device = {
 
 static inline void udc_device_init(struct omap_usb_config *pdata)
 {
-	/* IRQ numbers for omap7xx */
-	if(cpu_is_omap7xx()) {
-		udc_resources[1].start = INT_7XX_USB_GENI;
-		udc_resources[2].start = INT_7XX_USB_NON_ISO;
-		udc_resources[3].start = INT_7XX_USB_ISO;
-	}
 	pdata->udc_device = &udc_device;
 }
 
@@ -238,8 +232,6 @@ static inline void ohci_device_init(struct omap_usb_config *pdata)
 	if (!IS_ENABLED(CONFIG_USB_OHCI_HCD))
 		return;
 
-	if (cpu_is_omap7xx())
-		ohci_resources[1].start = INT_7XX_USB_HHC_1;
 	pdata->ohci_device = &ohci_device;
 	pdata->ocpi_enable = &ocpi_enable;
 }
@@ -267,8 +259,6 @@ static struct platform_device otg_device = {
 
 static inline void otg_device_init(struct omap_usb_config *pdata)
 {
-	if (cpu_is_omap7xx())
-		otg_resources[1].start = INT_7XX_USB_OTG;
 	pdata->otg_device = &otg_device;
 }
 
@@ -297,14 +287,7 @@ static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
 	}
 
 	if (is_device) {
-		if (cpu_is_omap7xx()) {
-			omap_cfg_reg(AA17_7XX_USB_DM);
-			omap_cfg_reg(W16_7XX_USB_PU_EN);
-			omap_cfg_reg(W17_7XX_USB_VBUSI);
-			omap_cfg_reg(W18_7XX_USB_DMCK_OUT);
-			omap_cfg_reg(W19_7XX_USB_DCRST);
-		} else
-			omap_cfg_reg(W4_USB_PUEN);
+		omap_cfg_reg(W4_USB_PUEN);
 	}
 
 	if (nwires == 2) {
@@ -324,14 +307,11 @@ static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
 		 *  - OTG support on this port not yet written
 		 */
 
-		/* Don't do this for omap7xx -- it causes USB to not work correctly */
-		if (!cpu_is_omap7xx()) {
-			l = omap_readl(USB_TRANSCEIVER_CTRL);
-			l &= ~(7 << 4);
-			if (!is_device)
-				l |= (3 << 1);
-			omap_writel(l, USB_TRANSCEIVER_CTRL);
-		}
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~(7 << 4);
+		if (!is_device)
+			l |= (3 << 1);
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
 
 		return 3 << 16;
 	}
@@ -698,7 +678,7 @@ void __init omap1_usb_init(struct omap_usb_config *_pdata)
 	ohci_device_init(pdata);
 	otg_device_init(pdata);
 
-	if (cpu_is_omap7xx() || cpu_is_omap16xx())
+	if (cpu_is_omap16xx())
 		omap_otg_init(pdata);
 	else if (cpu_is_omap15xx())
 		omap_1510_usb_init(pdata);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 3b53dda9ec79..821727eefd5a 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -255,17 +255,6 @@ config MACH_NOKIA_N8X0
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
 
-config OMAP3_SDRC_AC_TIMING
-	bool "Enable SDRC AC timing register changes"
-	depends on ARCH_OMAP3
-	help
-	  If you know that none of your system initiators will attempt to
-	  access SDRAM during CORE DVFS, select Y here.  This should boost
-	  SDRAM performance at lower CORE OPPs.  There are relatively few
-	  users who will wish to say yes at this point - almost everyone will
-	  wish to say no.  Selecting yes without understanding what is
-	  going on could result in system crashes;
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 2feb9f6630af..daf21127c82f 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -7,7 +7,7 @@
 obj-y := id.o io.o control.o devices.o fb.o pm.o \
 	 common.o dma.o omap-headsmp.o sram.o
 
-hwmod-common				= omap_hwmod.o omap_hwmod_reset.o \
+hwmod-common				= omap_hwmod.o \
 					  omap_hwmod_common_data.o \
 					  omap_hwmod_common_ipblock_data.o \
 					  omap_device.o display.o hdq1w.o \
@@ -80,7 +80,6 @@ obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-pm-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-4-5-pm-common)
 
 ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
 omap-4-5-pm-common			+= pm44xx.o
diff --git a/arch/arm/mach-omap2/am33xx-restart.c b/arch/arm/mach-omap2/am33xx-restart.c
index ef2f18a56b65..3cdf223addcc 100644
--- a/arch/arm/mach-omap2/am33xx-restart.c
+++ b/arch/arm/mach-omap2/am33xx-restart.c
@@ -2,14 +2,48 @@
 /*
  * am33xx-restart.c - Code common to all AM33xx machines.
  */
+#include <dt-bindings/pinctrl/am33xx.h>
+#include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/reboot.h>
 
 #include "common.h"
+#include "control.h"
 #include "prm.h"
 
+/*
+ * Advisory 1.0.36 EMU0 and EMU1: Terminals Must be Pulled High Before
+ * ICEPick Samples
+ *
+ * If EMU0/EMU1 pins have been used as GPIO outputs and actively driving low
+ * level, the device might not reboot in normal mode. We are in a bad position
+ * to override GPIO state here, so just switch the pins into EMU input mode
+ * (that's what reset will do anyway) and wait a bit, because the state will be
+ * latched 190 ns after reset.
+ */
+static void am33xx_advisory_1_0_36(void)
+{
+	u32 emu0 = omap_ctrl_readl(AM335X_PIN_EMU0);
+	u32 emu1 = omap_ctrl_readl(AM335X_PIN_EMU1);
+
+	/* If both pins are in EMU mode, nothing to do */
+	if (!(emu0 & 7) && !(emu1 & 7))
+		return;
+
+	/* Switch GPIO3_7/GPIO3_8 into EMU0/EMU1 modes respectively */
+	omap_ctrl_writel(emu0 & ~7, AM335X_PIN_EMU0);
+	omap_ctrl_writel(emu1 & ~7, AM335X_PIN_EMU1);
+
+	/*
+	 * Give pull-ups time to load the pin/PCB trace capacity.
+	 * 5 ms shall be enough to load 1 uF (would be huge capacity for these
+	 * pins) with TI-recommended 4k7 external pull-ups.
+	 */
+	mdelay(5);
+}
+
 /**
- * am3xx_restart - trigger a software restart of the SoC
+ * am33xx_restart - trigger a software restart of the SoC
  * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c
  * @cmd: passed from the userspace program rebooting the system (if provided)
  *
@@ -18,7 +52,10 @@
  */
 void am33xx_restart(enum reboot_mode mode, const char *cmd)
 {
-	/* TODO: Handle mode and cmd if necessary */
+	am33xx_advisory_1_0_36();
+
+	/* TODO: Handle cmd if necessary */
+	prm_reboot_mode = mode;
 
 	omap_prm_reset_system();
 }
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 1610c567a6a3..68e0baad2bbf 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -9,10 +9,10 @@
  * to support the OMAP2+ device tree boards with an unique board file.
  */
 #include <linux/io.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
 #include <linux/irqdomain.h>
 #include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/mod_devicetable.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
@@ -246,6 +246,12 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)")
 	.init_time	= omap_init_time_of,
 	.dt_compat	= am33xx_boards_compat,
 	.restart	= am33xx_restart,
+	/*
+	 * Historically am33xx supported only REBOOT_WARM even though default
+	 * reboot_mode was REBOOT_COLD. Reflect legacy de-facto behaviour in
+	 * SYSFS.
+	 */
+	.reboot_mode	= REBOOT_WARM,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 5e86145db0e2..969265d5d5c6 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -10,7 +10,8 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irq.h>
@@ -22,20 +23,18 @@
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/platform_data/mmc-omap.h>
 #include <linux/mfd/menelaus.h>
-#include <sound/tlv320aic3x.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
 #include "common.h"
 #include "mmc.h"
+#include "usb-tusb6010.h"
 #include "soc.h"
 #include "common-board-devices.h"
 
 #define TUSB6010_ASYNC_CS	1
 #define TUSB6010_SYNC_CS	4
-#define TUSB6010_GPIO_INT	58
-#define TUSB6010_GPIO_ENABLE	0
 #define TUSB6010_DMACHAN	0x3f
 
 #define NOKIA_N810_WIMAX	(1 << 2)
@@ -62,37 +61,6 @@ static void board_check_revision(void)
 }
 
 #if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
-/*
- * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
- * 1.5 V voltage regulators of PM companion chip. Companion chip will then
- * provide then PGOOD signal to TUSB6010 which will release it from reset.
- */
-static int tusb_set_power(int state)
-{
-	int i, retval = 0;
-
-	if (state) {
-		gpio_set_value(TUSB6010_GPIO_ENABLE, 1);
-		msleep(1);
-
-		/* Wait until TUSB6010 pulls INT pin down */
-		i = 100;
-		while (i && gpio_get_value(TUSB6010_GPIO_INT)) {
-			msleep(1);
-			i--;
-		}
-
-		if (!i) {
-			printk(KERN_ERR "tusb: powerup failed\n");
-			retval = -ENODEV;
-		}
-	} else {
-		gpio_set_value(TUSB6010_GPIO_ENABLE, 0);
-		msleep(10);
-	}
-
-	return retval;
-}
 
 static struct musb_hdrc_config musb_config = {
 	.multipoint	= 1,
@@ -103,39 +71,34 @@ static struct musb_hdrc_config musb_config = {
 
 static struct musb_hdrc_platform_data tusb_data = {
 	.mode		= MUSB_OTG,
-	.set_power	= tusb_set_power,
 	.min_power	= 25,	/* x2 = 50 mA drawn from VBUS as peripheral */
 	.power		= 100,	/* Max 100 mA VBUS for host mode */
 	.config		= &musb_config,
 };
 
+static struct gpiod_lookup_table tusb_gpio_table = {
+	.dev_id = "musb-tusb",
+	.table = {
+		GPIO_LOOKUP("gpio-0-31", 0, "enable", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-32-63", 26, "int", GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
 static void __init n8x0_usb_init(void)
 {
 	int ret = 0;
-	static const char announce[] __initconst = KERN_INFO "TUSB 6010\n";
-
-	/* PM companion chip power control pin */
-	ret = gpio_request_one(TUSB6010_GPIO_ENABLE, GPIOF_OUT_INIT_LOW,
-			       "TUSB6010 enable");
-	if (ret != 0) {
-		printk(KERN_ERR "Could not get TUSB power GPIO%i\n",
-		       TUSB6010_GPIO_ENABLE);
-		return;
-	}
-	tusb_set_power(0);
 
+	gpiod_add_lookup_table(&tusb_gpio_table);
 	ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
-					TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
-					TUSB6010_GPIO_INT, TUSB6010_DMACHAN);
+				       TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
+				       TUSB6010_DMACHAN);
 	if (ret != 0)
-		goto err;
+		return;
 
-	printk(announce);
+	pr_info("TUSB 6010\n");
 
 	return;
-
-err:
-	gpio_free(TUSB6010_GPIO_ENABLE);
 }
 #else
 
@@ -171,22 +134,31 @@ static struct spi_board_info n800_spi_board_info[] __initdata = {
  * GPIO23 and GPIO9		slot 2 EMMC on N810
  *
  */
-#define N8X0_SLOT_SWITCH_GPIO	96
-#define N810_EMMC_VSD_GPIO	23
-#define N810_EMMC_VIO_GPIO	9
-
 static int slot1_cover_open;
 static int slot2_cover_open;
 static struct device *mmc_device;
 
-static int n8x0_mmc_switch_slot(struct device *dev, int slot)
-{
-#ifdef CONFIG_MMC_DEBUG
-	dev_dbg(dev, "Choose slot %d\n", slot + 1);
-#endif
-	gpio_set_value(N8X0_SLOT_SWITCH_GPIO, slot);
-	return 0;
-}
+static struct gpiod_lookup_table nokia800_mmc_gpio_table = {
+	.dev_id = "mmci-omap.0",
+	.table = {
+		/* Slot switch, GPIO 96 */
+		GPIO_LOOKUP("gpio-96-127", 0, "switch", GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
+static struct gpiod_lookup_table nokia810_mmc_gpio_table = {
+	.dev_id = "mmci-omap.0",
+	.table = {
+		/* Slot switch, GPIO 96 */
+		GPIO_LOOKUP("gpio-96-127", 0, "switch", GPIO_ACTIVE_HIGH),
+		/* Slot index 1, VSD power, GPIO 23 */
+		GPIO_LOOKUP_IDX("gpio-0-31", 23, "vsd", 1, GPIO_ACTIVE_HIGH),
+		/* Slot index 1, VIO power, GPIO 9 */
+		GPIO_LOOKUP_IDX("gpio-0-31", 9, "vio", 1, GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
 
 static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
 					int power_on, int vdd)
@@ -195,7 +167,7 @@ static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
 
 #ifdef CONFIG_MMC_DEBUG
 	dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
-		power_on ? "on" : "off", vdd);
+		str_on_off(power_on), vdd);
 #endif
 	if (slot == 0) {
 		if (!power_on)
@@ -257,31 +229,13 @@ static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
 	return 0;
 }
 
-static void n810_set_power_emmc(struct device *dev,
-					 int power_on)
-{
-	dev_dbg(dev, "Set EMMC power %s\n", power_on ? "on" : "off");
-
-	if (power_on) {
-		gpio_set_value(N810_EMMC_VSD_GPIO, 1);
-		msleep(1);
-		gpio_set_value(N810_EMMC_VIO_GPIO, 1);
-		msleep(1);
-	} else {
-		gpio_set_value(N810_EMMC_VIO_GPIO, 0);
-		msleep(50);
-		gpio_set_value(N810_EMMC_VSD_GPIO, 0);
-		msleep(50);
-	}
-}
-
 static int n8x0_mmc_set_power(struct device *dev, int slot, int power_on,
 			      int vdd)
 {
 	if (board_is_n800() || slot == 0)
 		return n8x0_mmc_set_power_menelaus(dev, slot, power_on, vdd);
 
-	n810_set_power_emmc(dev, power_on);
+	/* The n810 power will be handled by GPIO code in the driver */
 
 	return 0;
 }
@@ -419,13 +373,6 @@ static void n8x0_mmc_shutdown(struct device *dev)
 static void n8x0_mmc_cleanup(struct device *dev)
 {
 	menelaus_unregister_mmc_callback();
-
-	gpio_free(N8X0_SLOT_SWITCH_GPIO);
-
-	if (board_is_n810()) {
-		gpio_free(N810_EMMC_VSD_GPIO);
-		gpio_free(N810_EMMC_VIO_GPIO);
-	}
 }
 
 /*
@@ -434,7 +381,6 @@ static void n8x0_mmc_cleanup(struct device *dev)
  */
 static struct omap_mmc_platform_data mmc1_data = {
 	.nr_slots			= 0,
-	.switch_slot			= n8x0_mmc_switch_slot,
 	.init				= n8x0_mmc_late_init,
 	.cleanup			= n8x0_mmc_cleanup,
 	.shutdown			= n8x0_mmc_shutdown,
@@ -464,15 +410,8 @@ static struct omap_mmc_platform_data mmc1_data = {
 
 static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
 
-static struct gpio n810_emmc_gpios[] __initdata = {
-	{ N810_EMMC_VSD_GPIO, GPIOF_OUT_INIT_LOW,  "MMC slot 2 Vddf" },
-	{ N810_EMMC_VIO_GPIO, GPIOF_OUT_INIT_LOW,  "MMC slot 2 Vdd"  },
-};
-
 static void __init n8x0_mmc_init(void)
 {
-	int err;
-
 	if (board_is_n810()) {
 		mmc1_data.slots[0].name = "external";
 
@@ -484,20 +423,9 @@ static void __init n8x0_mmc_init(void)
 		 */
 		mmc1_data.slots[1].name = "internal";
 		mmc1_data.slots[1].ban_openended = 1;
-	}
-
-	err = gpio_request_one(N8X0_SLOT_SWITCH_GPIO, GPIOF_OUT_INIT_LOW,
-			       "MMC slot switch");
-	if (err)
-		return;
-
-	if (board_is_n810()) {
-		err = gpio_request_array(n810_emmc_gpios,
-					 ARRAY_SIZE(n810_emmc_gpios));
-		if (err) {
-			gpio_free(N8X0_SLOT_SWITCH_GPIO);
-			return;
-		}
+		gpiod_add_lookup_table(&nokia810_mmc_gpio_table);
+	} else {
+		gpiod_add_lookup_table(&nokia800_mmc_gpio_table);
 	}
 
 	mmc1_data.nr_slots = 2;
@@ -505,7 +433,7 @@ static void __init n8x0_mmc_init(void)
 }
 #else
 static struct omap_mmc_platform_data mmc1_data;
-void __init n8x0_mmc_init(void)
+static void __init n8x0_mmc_init(void)
 {
 }
 #endif	/* CONFIG_MMC_OMAP */
@@ -567,8 +495,13 @@ struct menelaus_platform_data n8x0_menelaus_platform_data = {
 	.late_init = n8x0_menelaus_late_init,
 };
 
-struct aic3x_pdata n810_aic33_data = {
-	.gpio_reset = 118,
+static struct gpiod_lookup_table nokia810_asoc_gpio_table = {
+	.dev_id = "soc-audio",
+	.table = {
+		GPIO_LOOKUP("gpio-0-15", 10, "headset", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-80-111", 21, "speaker", GPIO_ACTIVE_HIGH),
+		{ }
+	},
 };
 
 static int __init n8x0_late_initcall(void)
@@ -578,6 +511,7 @@ static int __init n8x0_late_initcall(void)
 
 	n8x0_mmc_init();
 	n8x0_usb_init();
+	gpiod_add_lookup_table(&nokia810_asoc_gpio_table);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
index 8a9983cb4733..93f6d3cd9525 100644
--- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
+++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
@@ -20,6 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/clk.h>
+#include <linux/clk/ti.h>
 #include <linux/io.h>
 
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index edf046b470ba..96c5cdc718c8 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -39,6 +39,8 @@
 #include "sdrc.h"
 #include "sram.h"
 
+static u16 cpu_mask;
+
 const struct prcm_config *curr_prcm_set;
 const struct prcm_config *rate_table;
 
@@ -55,7 +57,7 @@ static unsigned long sys_ck_rate;
  *
  * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
  */
-unsigned long omap2_table_mpu_recalc(struct clk_hw *clk,
+static unsigned long omap2_table_mpu_recalc(struct clk_hw *clk,
 				     unsigned long parent_rate)
 {
 	return curr_prcm_set->mpu_speed;
@@ -68,8 +70,8 @@ unsigned long omap2_table_mpu_recalc(struct clk_hw *clk,
  * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
  * just uses the ARM rates.
  */
-long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate,
-			       unsigned long *parent_rate)
+static int omap2_determine_rate_to_table(struct clk_hw *hw,
+					 struct clk_rate_request *req)
 {
 	const struct prcm_config *ptr;
 	long highest_rate;
@@ -85,15 +87,17 @@ long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate,
 		highest_rate = ptr->mpu_speed;
 
 		/* Can check only after xtal frequency check */
-		if (ptr->mpu_speed <= rate)
+		if (ptr->mpu_speed <= req->rate)
 			break;
 	}
-	return highest_rate;
+	req->rate = highest_rate;
+
+	return 0;
 }
 
 /* Sets basic clocks based on the specified rate */
-int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
-			    unsigned long parent_rate)
+static int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
 {
 	u32 cur_rate, done_rate, bypass = 0;
 	const struct prcm_config *prcm;
@@ -160,14 +164,14 @@ int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
 }
 
 /**
- * omap2xxx_clkt_vps_check_bootloader_rate - determine which of the rate
+ * omap2xxx_clkt_vps_check_bootloader_rates - determine which of the rate
  * table sets matches the current CORE DPLL hardware rate
  *
  * Check the MPU rate set by bootloader.  Sets the 'curr_prcm_set'
  * global to point to the active rate set when found; otherwise, sets
  * it to NULL.  No return value;
  */
-void omap2xxx_clkt_vps_check_bootloader_rates(void)
+static void omap2xxx_clkt_vps_check_bootloader_rates(void)
 {
 	const struct prcm_config *prcm = NULL;
 	unsigned long rate;
@@ -193,7 +197,7 @@ void omap2xxx_clkt_vps_check_bootloader_rates(void)
  * sys_ck rate, but before the virt_prcm_set clock rate is
  * recalculated.  No return value.
  */
-void omap2xxx_clkt_vps_late_init(void)
+static void omap2xxx_clkt_vps_late_init(void)
 {
 	struct clk *c;
 
@@ -213,7 +217,7 @@ void omap2xxx_clkt_vps_late_init(void)
 static const struct clk_ops virt_prcm_set_ops = {
 	.recalc_rate	= &omap2_table_mpu_recalc,
 	.set_rate	= &omap2_select_table_rate,
-	.round_rate	= &omap2_round_to_table_rate,
+	.determine_rate = &omap2_determine_rate_to_table,
 };
 
 /**
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 3c1d12dc8ff3..83fae51722a9 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -36,8 +36,6 @@
 #include "cm-regbits-34xx.h"
 #include "common.h"
 
-u16 cpu_mask;
-
 /* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
 #define OMAP3430_DPLL_FINT_BAND1_MIN	750000
 #define OMAP3430_DPLL_FINT_BAND1_MAX	2100000
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index bbe4b32891bb..41391fa1418a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -63,13 +63,6 @@
 
 extern struct ti_clk_ll_ops omap_clk_ll_ops;
 
-extern u16 cpu_mask;
-
-extern const struct clkops clkops_omap2_dflt_wait;
-extern const struct clkops clkops_omap2_dflt;
-
-extern struct clk_functions omap2_clk_functions;
-
 int __init omap2_clk_setup_ll_ops(void);
 
 void __init ti_clk_init_features(void);
diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h
index a8408f9d0f33..73c011dadfd2 100644
--- a/arch/arm/mach-omap2/clock2xxx.h
+++ b/arch/arm/mach-omap2/clock2xxx.h
@@ -12,35 +12,6 @@
 #include <linux/clk-provider.h>
 #include "clock.h"
 
-unsigned long omap2_table_mpu_recalc(struct clk_hw *clk,
-				     unsigned long parent_rate);
-int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
-			    unsigned long parent_rate);
-long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate,
-			       unsigned long *parent_rate);
-unsigned long omap2xxx_sys_clk_recalc(struct clk_hw *clk,
-				      unsigned long parent_rate);
-unsigned long omap2_osc_clk_recalc(struct clk_hw *clk,
-				   unsigned long parent_rate);
-void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
 unsigned long omap2xxx_clk_get_core_rate(void);
-u32 omap2xxx_get_sysclkdiv(void);
-void omap2xxx_clk_prepare_for_reboot(void);
-void omap2xxx_clkt_vps_check_bootloader_rates(void);
-void omap2xxx_clkt_vps_late_init(void);
-
-#ifdef CONFIG_SOC_OMAP2420
-int omap2420_clk_init(void);
-#else
-#define omap2420_clk_init()	do { } while(0)
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-int omap2430_clk_init(void);
-#else
-#define omap2430_clk_init()	do { } while(0)
-#endif
-
-extern struct clk_hw *dclk_hw;
 
 #endif
diff --git a/arch/arm/mach-omap2/clock3xxx.h b/arch/arm/mach-omap2/clock3xxx.h
deleted file mode 100644
index 10a9f577dc1a..000000000000
--- a/arch/arm/mach-omap2/clock3xxx.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * OMAP3-common clock function prototypes and macros
- *
- * Copyright (C) 2007-2010 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
-
-int omap3xxx_clk_init(void);
-int omap3_core_dpll_m2_set_rate(struct clk_hw *clk, unsigned long rate,
-					unsigned long parent_rate);
-
-extern struct clk *sdrc_ick_p;
-extern struct clk *arm_fck_p;
-
-extern const struct clkops clkops_noncore_dpll_ops;
-
-#endif
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 1feb0098705e..69dc5b839335 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -831,7 +831,7 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
  * -EINVAL if @clkdm is NULL or if clockdomain does not support
  * software-initiated sleep; 0 upon success.
  */
-int clkdm_sleep_nolock(struct clockdomain *clkdm)
+static int clkdm_sleep_nolock(struct clockdomain *clkdm)
 {
 	int ret;
 
@@ -885,7 +885,7 @@ int clkdm_sleep(struct clockdomain *clkdm)
  * -EINVAL if @clkdm is NULL or if the clockdomain does not support
  * software-controlled wakeup; 0 upon success.
  */
-int clkdm_wakeup_nolock(struct clockdomain *clkdm)
+static int clkdm_wakeup_nolock(struct clockdomain *clkdm)
 {
 	int ret;
 
@@ -990,7 +990,7 @@ void clkdm_allow_idle(struct clockdomain *clkdm)
 }
 
 /**
- * clkdm_deny_idle - disable hwsup idle transitions for clkdm
+ * clkdm_deny_idle_nolock - disable hwsup idle transitions for clkdm
  * @clkdm: struct clockdomain *
  *
  * Prevent the hardware from automatically switching the clockdomain
@@ -1043,46 +1043,6 @@ void clkdm_deny_idle(struct clockdomain *clkdm)
 	pwrdm_unlock(clkdm->pwrdm.ptr);
 }
 
-/**
- * clkdm_in_hwsup - is clockdomain @clkdm have hardware-supervised idle enabled?
- * @clkdm: struct clockdomain *
- *
- * Returns true if clockdomain @clkdm currently has
- * hardware-supervised idle enabled, or false if it does not or if
- * @clkdm is NULL.  It is only valid to call this function after
- * clkdm_init() has been called.  This function does not actually read
- * bits from the hardware; it instead tests an in-memory flag that is
- * changed whenever the clockdomain code changes the auto-idle mode.
- */
-bool clkdm_in_hwsup(struct clockdomain *clkdm)
-{
-	bool ret;
-
-	if (!clkdm)
-		return false;
-
-	ret = (clkdm->_flags & _CLKDM_FLAG_HWSUP_ENABLED) ? true : false;
-
-	return ret;
-}
-
-/**
- * clkdm_missing_idle_reporting - can @clkdm enter autoidle even if in use?
- * @clkdm: struct clockdomain *
- *
- * Returns true if clockdomain @clkdm has the
- * CLKDM_MISSING_IDLE_REPORTING flag set, or false if not or @clkdm is
- * null.  More information is available in the documentation for the
- * CLKDM_MISSING_IDLE_REPORTING macro.
- */
-bool clkdm_missing_idle_reporting(struct clockdomain *clkdm)
-{
-	if (!clkdm)
-		return false;
-
-	return (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) ? true : false;
-}
-
 /* Public autodep handling functions (deprecated) */
 
 /**
@@ -1150,7 +1110,7 @@ void clkdm_del_autodeps(struct clockdomain *clkdm)
 /**
  * clkdm_clk_enable - add an enabled downstream clock to this clkdm
  * @clkdm: struct clockdomain *
- * @clk: struct clk * of the enabled downstream clock
+ * @unused: struct clk * of the enabled downstream clock
  *
  * Increment the usecount of the clockdomain @clkdm and ensure that it
  * is awake before @clk is enabled.  Intended to be called by
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 68550b23c938..86a2f9e5d0ef 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -48,6 +48,7 @@
 #define CLKDM_NO_AUTODEPS			(1 << 4)
 #define CLKDM_ACTIVE_WITH_MPU			(1 << 5)
 #define CLKDM_MISSING_IDLE_REPORTING		(1 << 6)
+#define CLKDM_STANDBY_FORCE_WAKEUP		BIT(7)
 
 #define CLKDM_CAN_HWSUP		(CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
 #define CLKDM_CAN_SWSUP		(CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
@@ -203,12 +204,8 @@ void clkdm_allow_idle_nolock(struct clockdomain *clkdm);
 void clkdm_allow_idle(struct clockdomain *clkdm);
 void clkdm_deny_idle_nolock(struct clockdomain *clkdm);
 void clkdm_deny_idle(struct clockdomain *clkdm);
-bool clkdm_in_hwsup(struct clockdomain *clkdm);
-bool clkdm_missing_idle_reporting(struct clockdomain *clkdm);
 
-int clkdm_wakeup_nolock(struct clockdomain *clkdm);
 int clkdm_wakeup(struct clockdomain *clkdm);
-int clkdm_sleep_nolock(struct clockdomain *clkdm);
 int clkdm_sleep(struct clockdomain *clkdm);
 
 int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk);
diff --git a/arch/arm/mach-omap2/clockdomains33xx_data.c b/arch/arm/mach-omap2/clockdomains33xx_data.c
index 87f4e927eb18..c05a3c07d448 100644
--- a/arch/arm/mach-omap2/clockdomains33xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains33xx_data.c
@@ -19,7 +19,7 @@ static struct clockdomain l4ls_am33xx_clkdm = {
 	.pwrdm		= { .name = "per_pwrdm" },
 	.cm_inst	= AM33XX_CM_PER_MOD,
 	.clkdm_offs	= AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET,
-	.flags		= CLKDM_CAN_SWSUP,
+	.flags		= CLKDM_CAN_SWSUP | CLKDM_STANDBY_FORCE_WAKEUP,
 };
 
 static struct clockdomain l3s_am33xx_clkdm = {
diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c
index 0827acb60584..1c6d69f4bf49 100644
--- a/arch/arm/mach-omap2/cm2xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx.c
@@ -95,103 +95,6 @@ void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
 	_omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
 }
 
-/*
- * APLL control
- */
-
-static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
-{
-	u32 v;
-
-	v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
-	v &= ~mask;
-	v |= m << __ffs(mask);
-	omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
-}
-
-void omap2xxx_cm_set_apll54_disable_autoidle(void)
-{
-	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
-				    OMAP24XX_AUTO_54M_MASK);
-}
-
-void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
-{
-	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
-				    OMAP24XX_AUTO_54M_MASK);
-}
-
-void omap2xxx_cm_set_apll96_disable_autoidle(void)
-{
-	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
-				    OMAP24XX_AUTO_96M_MASK);
-}
-
-void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
-{
-	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
-				    OMAP24XX_AUTO_96M_MASK);
-}
-
-/* Enable an APLL if off */
-static int _omap2xxx_apll_enable(u8 enable_bit, u8 status_bit)
-{
-	u32 v, m;
-
-	m = EN_APLL_LOCKED << enable_bit;
-
-	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-	if (v & m)
-		return 0;   /* apll already enabled */
-
-	v |= m;
-	omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
-
-	omap2xxx_cm_wait_module_ready(0, PLL_MOD, 1, status_bit);
-
-	/*
-	 * REVISIT: Should we return an error code if
-	 * omap2xxx_cm_wait_module_ready() fails?
-	 */
-	return 0;
-}
-
-/* Stop APLL */
-static void _omap2xxx_apll_disable(u8 enable_bit)
-{
-	u32 v;
-
-	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-	v &= ~(EN_APLL_LOCKED << enable_bit);
-	omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
-}
-
-/* Enable an APLL if off */
-int omap2xxx_cm_apll54_enable(void)
-{
-	return _omap2xxx_apll_enable(OMAP24XX_EN_54M_PLL_SHIFT,
-				     OMAP24XX_ST_54M_APLL_SHIFT);
-}
-
-/* Enable an APLL if off */
-int omap2xxx_cm_apll96_enable(void)
-{
-	return _omap2xxx_apll_enable(OMAP24XX_EN_96M_PLL_SHIFT,
-				     OMAP24XX_ST_96M_APLL_SHIFT);
-}
-
-/* Stop APLL */
-void omap2xxx_cm_apll54_disable(void)
-{
-	_omap2xxx_apll_disable(OMAP24XX_EN_54M_PLL_SHIFT);
-}
-
-/* Stop APLL */
-void omap2xxx_cm_apll96_disable(void)
-{
-	_omap2xxx_apll_disable(OMAP24XX_EN_96M_PLL_SHIFT);
-}
-
 /**
  * omap2xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components
  * @idlest_reg: CM_IDLEST* virtual address
@@ -242,8 +145,8 @@ static int omap2xxx_cm_split_idlest_reg(struct clk_omap_reg *idlest_reg,
  * (@prcm_mod, @idlest_id, @idlest_shift) is clocked.  Return 0 upon
  * success or -EBUSY if the module doesn't enable in time.
  */
-int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
-				  u8 idlest_shift)
+static int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
+					 u8 idlest_shift)
 {
 	int ena = 0, i = 0;
 	u8 cm_idlest_reg;
diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h
index 004016d7459e..7cbeff15ffb0 100644
--- a/arch/arm/mach-omap2/cm2xxx.h
+++ b/arch/arm/mach-omap2/cm2xxx.h
@@ -46,13 +46,6 @@
 extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
 extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
 
-extern void omap2xxx_cm_set_apll54_disable_autoidle(void);
-extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void);
-extern void omap2xxx_cm_set_apll96_disable_autoidle(void);
-extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
-
-int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
-				  u8 idlest_shift);
 extern int omap2xxx_cm_fclks_active(void);
 extern int omap2xxx_cm_mpu_retention_allowed(void);
 extern u32 omap2xxx_cm_get_core_clk_src(void);
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h
index 70944b94cc09..6dfc09383160 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h
@@ -93,11 +93,6 @@ static inline u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 	return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
 }
 
-extern int omap2xxx_cm_apll54_enable(void);
-extern void omap2xxx_cm_apll54_disable(void);
-extern int omap2xxx_cm_apll96_enable(void);
-extern void omap2xxx_cm_apll96_disable(void);
-
 #endif
 
 /* CM register bits shared between 24XX and 3430 */
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index d61fa06117b4..a4dd42abda89 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -5,7 +5,7 @@
  * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
  * Vaibhav Hiremath <hvaibhav@ti.com>
  *
- * Reference taken from from OMAP4 cminst44xx.c
+ * Reference taken from OMAP4 cminst44xx.c
  */
 
 #include <linux/kernel.h>
@@ -20,6 +20,9 @@
 #include "cm-regbits-34xx.h"
 #include "cm-regbits-33xx.h"
 #include "prm33xx.h"
+#if IS_ENABLED(CONFIG_SUSPEND)
+#include <linux/suspend.h>
+#endif
 
 /*
  * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield:
@@ -328,8 +331,17 @@ static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
 {
 	bool hwsup = false;
 
+#if IS_ENABLED(CONFIG_SUSPEND)
+	/*
+	 * In case of standby, Don't put the l4ls clk domain to sleep.
+	 * Since CM3 PM FW doesn't wake-up/enable the l4ls clk domain
+	 * upon wake-up, CM3 PM FW fails to wake-up th MPU.
+	 */
+	if (pm_suspend_target_state == PM_SUSPEND_STANDBY &&
+	    (clkdm->flags & CLKDM_STANDBY_FORCE_WAKEUP))
+		return 0;
+#endif
 	hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
-
 	if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
 		am33xx_clkdm_sleep(clkdm);
 
@@ -357,7 +369,7 @@ static int am33xx_clkdm_save_context(struct clockdomain *clkdm)
 }
 
 /**
- * am33xx_restore_save_context - Restore the clockdomain transition context
+ * am33xx_clkdm_restore_context - Restore the clockdomain transition context
  * @clkdm: The clockdomain pointer whose context needs to be restored
  *
  * Restore the clockdomain transition context.
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 46670521b278..49483a888046 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -237,7 +237,7 @@ static void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs)
 }
 
 /**
- * omap4_cminst_clkdm_force_sleep - try to take a clockdomain out of idle
+ * omap4_cminst_clkdm_force_wakeup - try to take a clockdomain out of idle
  * @part: PRCM partition ID that the clockdomain registers exist in
  * @inst: CM instance register offset (*_INST macro)
  * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index b23962c38fb2..69694af71475 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -2,12 +2,10 @@
 #ifndef __OMAP_COMMON_BOARD_DEVICES__
 #define __OMAP_COMMON_BOARD_DEVICES__
 
-#include <sound/tlv320aic3x.h>
 #include <linux/mfd/menelaus.h>
 
 void *n8x0_legacy_init(void);
 
 extern struct menelaus_platform_data n8x0_menelaus_platform_data;
-extern struct aic3x_pdata n810_aic33_data;
 
 #endif /* __OMAP_COMMON_BOARD_DEVICES__ */
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index bd5981945239..9d60799e9752 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -38,24 +38,12 @@
 #include <asm/hardware/cache-l2x0.h>
 
 #include "i2c.h"
-#include "serial.h"
-
-#include "usb.h"
 
 #define OMAP_INTC_START		NR_IRQS
 
 extern int (*omap_pm_soc_init)(void);
 int omap_pm_nop_init(void);
 
-#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP2)
-int omap2_pm_init(void);
-#else
-static inline int omap2_pm_init(void)
-{
-	return 0;
-}
-#endif
-
 #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
 int omap3_pm_init(void);
 #else
@@ -90,12 +78,6 @@ static inline int amx3_common_pm_init(void)
 }
 #endif
 
-extern void omap2_init_common_infrastructure(void);
-
-extern void omap_init_time(void);
-extern void omap3_secure_sync32k_timer_init(void);
-extern void omap3_gptimer_timer_init(void);
-extern void omap4_local_timer_init(void);
 #ifdef CONFIG_CACHE_L2X0
 int omap_l2_cache_init(void);
 #define OMAP_L2C_AUX_CTRL	(L2C_AUX_CTRL_SHARED_OVERRIDE | \
@@ -123,9 +105,7 @@ static inline void omap5_realtime_timer_init(void)
 void omap2420_init_early(void);
 void omap2430_init_early(void);
 void omap3430_init_early(void);
-void omap35xx_init_early(void);
 void omap3630_init_early(void);
-void omap3_init_early(void);	/* Do not use this one */
 void am33xx_init_early(void);
 void am35xx_init_early(void);
 void ti814x_init_early(void);
@@ -136,12 +116,9 @@ void omap4430_init_early(void);
 void omap5_init_early(void);
 void omap3_init_late(void);
 void omap4430_init_late(void);
-void omap2420_init_late(void);
-void omap2430_init_late(void);
 void ti81xx_init_late(void);
 void am33xx_init_late(void);
 void omap5_init_late(void);
-int omap2_common_pm_late_init(void);
 void dra7xx_init_early(void);
 void dra7xx_init_late(void);
 
@@ -235,11 +212,6 @@ void __init ti81xx_map_io(void);
 	}							\
 })
 
-extern struct device *omap2_get_mpuss_device(void);
-extern struct device *omap2_get_iva_device(void);
-extern struct device *omap2_get_l3_device(void);
-extern struct device *omap4_get_dsp_device(void);
-
 void omap_gic_of_init(void);
 
 #ifdef CONFIG_CACHE_L2X0
@@ -284,11 +256,13 @@ extern u32 omap4_get_cpu1_ns_pa_addr(void);
 
 #if defined(CONFIG_SMP) && defined(CONFIG_PM)
 extern int omap4_mpuss_init(void);
-extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state);
+extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state,
+				bool rcuidle);
 extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state);
 #else
 static inline int omap4_enter_lowpower(unsigned int cpu,
-					unsigned int power_state)
+					unsigned int power_state,
+					bool rcuidle)
 {
 	cpu_do_idle();
 	return 0;
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index c514a9602269..79860b23030d 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -226,68 +226,7 @@ void omap3_ctrl_write_boot_mode(u8 bootmode)
 
 #endif
 
-/**
- * omap_ctrl_write_dsp_boot_addr - set boot address for a remote processor
- * @bootaddr: physical address of the boot loader
- *
- * Set boot address for the boot loader of a supported processor
- * when a power ON sequence occurs.
- */
-void omap_ctrl_write_dsp_boot_addr(u32 bootaddr)
-{
-	u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTADDR :
-		     cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTADDR :
-		     cpu_is_omap44xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
-		     soc_is_omap54xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
-		     0;
-
-	if (!offset) {
-		pr_err("%s: unsupported omap type\n", __func__);
-		return;
-	}
-
-	omap_ctrl_writel(bootaddr, offset);
-}
-
-/**
- * omap_ctrl_write_dsp_boot_mode - set boot mode for a remote processor
- * @bootmode: 8-bit value to pass to some boot code
- *
- * Sets boot mode for the boot loader of a supported processor
- * when a power ON sequence occurs.
- */
-void omap_ctrl_write_dsp_boot_mode(u8 bootmode)
-{
-	u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTMOD :
-		     cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTMOD :
-		     0;
-
-	if (!offset) {
-		pr_err("%s: unsupported omap type\n", __func__);
-		return;
-	}
-
-	omap_ctrl_writel(bootmode, offset);
-}
-
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
-/*
- * Clears the scratchpad contents in case of cold boot-
- * called during bootup
- */
-void omap3_clear_scratchpad_contents(void)
-{
-	u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
-	void __iomem *v_addr;
-	u32 offset = 0;
-
-	v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
-	if (omap3xxx_prm_clear_global_cold_reset()) {
-		for ( ; offset <= max_offset; offset += 0x4)
-			writel_relaxed(0x0, (v_addr + offset));
-	}
-}
-
 /* Populate the scratchpad structure with restore structure */
 void omap3_save_scratchpad_contents(void)
 {
@@ -846,15 +785,3 @@ of_node_put:
 	return ret;
 
 }
-
-/**
- * omap3_control_legacy_iomap_init - legacy iomap init for clock providers
- *
- * Legacy iomap init for clock provider. Needed only by legacy boot mode,
- * where the base addresses are not parsed from DT, but still required
- * by the clock driver to be setup properly.
- */
-void __init omap3_control_legacy_iomap_init(void)
-{
-	omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap2_ctrl_base);
-}
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index c4ca30ba1790..7e7440533bf9 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -512,8 +512,6 @@ extern void omap_ctrl_writeb(u8 val, u16 offset);
 extern void omap_ctrl_writew(u16 val, u16 offset);
 extern void omap_ctrl_writel(u32 val, u16 offset);
 
-extern void omap3_save_scratchpad_contents(void);
-extern void omap3_clear_scratchpad_contents(void);
 extern void omap3_restore(void);
 extern void omap3_restore_es3(void);
 extern void omap3_restore_3630(void);
@@ -521,14 +519,11 @@ extern u32 omap3_arm_context[128];
 extern void omap3_control_save_context(void);
 extern void omap3_control_restore_context(void);
 extern void omap3_ctrl_write_boot_mode(u8 bootmode);
-extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr);
-extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
 extern void omap3630_ctrl_disable_rta(void);
 extern int omap3_ctrl_save_padconf(void);
 void omap3_ctrl_init(void);
 int omap2_control_base_init(void);
 int omap_control_init(void);
-void __init omap3_control_legacy_iomap_init(void);
 #else
 #define omap_ctrl_readb(x)		0
 #define omap_ctrl_readw(x)		0
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 090a8aafb25e..2ab5dcbfb7f6 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -133,7 +133,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
 	}
 
 	/* Execute ARM wfi */
-	omap_sram_idle();
+	omap_sram_idle(true);
 
 	/*
 	 * Call idle CPU PM enter notifier chain to restore
@@ -265,6 +265,7 @@ static struct cpuidle_driver omap3_idle_driver = {
 	.owner            = THIS_MODULE,
 	.states = {
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 2 + 2,
 			.target_residency = 5,
@@ -272,6 +273,7 @@ static struct cpuidle_driver omap3_idle_driver = {
 			.desc		  = "MPU ON + CORE ON",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 10 + 10,
 			.target_residency = 30,
@@ -279,6 +281,7 @@ static struct cpuidle_driver omap3_idle_driver = {
 			.desc		  = "MPU ON + CORE ON",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 50 + 50,
 			.target_residency = 300,
@@ -286,6 +289,7 @@ static struct cpuidle_driver omap3_idle_driver = {
 			.desc		  = "MPU RET + CORE ON",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 1500 + 1800,
 			.target_residency = 4000,
@@ -293,6 +297,7 @@ static struct cpuidle_driver omap3_idle_driver = {
 			.desc		  = "MPU OFF + CORE ON",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 2500 + 7500,
 			.target_residency = 12000,
@@ -300,6 +305,7 @@ static struct cpuidle_driver omap3_idle_driver = {
 			.desc		  = "MPU RET + CORE RET",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 3000 + 8500,
 			.target_residency = 15000,
@@ -307,6 +313,7 @@ static struct cpuidle_driver omap3_idle_driver = {
 			.desc		  = "MPU OFF + CORE RET",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 10000 + 30000,
 			.target_residency = 30000,
@@ -328,6 +335,7 @@ static struct cpuidle_driver omap3430_idle_driver = {
 	.owner            = THIS_MODULE,
 	.states = {
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 110 + 162,
 			.target_residency = 5,
@@ -335,6 +343,7 @@ static struct cpuidle_driver omap3430_idle_driver = {
 			.desc		  = "MPU ON + CORE ON",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 106 + 180,
 			.target_residency = 309,
@@ -342,6 +351,7 @@ static struct cpuidle_driver omap3430_idle_driver = {
 			.desc		  = "MPU ON + CORE ON",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 107 + 410,
 			.target_residency = 46057,
@@ -349,6 +359,7 @@ static struct cpuidle_driver omap3430_idle_driver = {
 			.desc		  = "MPU RET + CORE ON",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 121 + 3374,
 			.target_residency = 46057,
@@ -356,6 +367,7 @@ static struct cpuidle_driver omap3430_idle_driver = {
 			.desc		  = "MPU OFF + CORE ON",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 855 + 1146,
 			.target_residency = 46057,
@@ -363,6 +375,7 @@ static struct cpuidle_driver omap3430_idle_driver = {
 			.desc		  = "MPU RET + CORE RET",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 7580 + 4134,
 			.target_residency = 484329,
@@ -370,6 +383,7 @@ static struct cpuidle_driver omap3430_idle_driver = {
 			.desc		  = "MPU OFF + CORE RET",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 7505 + 15274,
 			.target_residency = 484329,
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index de37027ad758..df106524d695 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -105,7 +105,7 @@ static int omap_enter_idle_smp(struct cpuidle_device *dev,
 	}
 	raw_spin_unlock_irqrestore(&mpu_lock, flag);
 
-	omap4_enter_lowpower(dev->cpu, cx->cpu_state);
+	omap4_enter_lowpower(dev->cpu, cx->cpu_state, true);
 
 	raw_spin_lock_irqsave(&mpu_lock, flag);
 	if (cx->mpu_state_vote == num_online_cpus())
@@ -151,10 +151,10 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 				 (cx->mpu_logic_state == PWRDM_POWER_OFF);
 
 	/* Enter broadcast mode for periodic timers */
-	RCU_NONIDLE(tick_broadcast_enable());
+	tick_broadcast_enable();
 
 	/* Enter broadcast mode for one-shot timers */
-	RCU_NONIDLE(tick_broadcast_enter());
+	tick_broadcast_enter();
 
 	/*
 	 * Call idle CPU PM enter notifier chain so that
@@ -166,7 +166,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 
 	if (dev->cpu == 0) {
 		pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
-		RCU_NONIDLE(omap_set_pwrdm_state(mpu_pd, cx->mpu_state));
+		omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
 
 		/*
 		 * Call idle CPU cluster PM enter notifier chain
@@ -178,13 +178,13 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 				index = 0;
 				cx = state_ptr + index;
 				pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
-				RCU_NONIDLE(omap_set_pwrdm_state(mpu_pd, cx->mpu_state));
+				omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
 				mpuss_can_lose_context = 0;
 			}
 		}
 	}
 
-	omap4_enter_lowpower(dev->cpu, cx->cpu_state);
+	omap4_enter_lowpower(dev->cpu, cx->cpu_state, true);
 	cpu_done[dev->cpu] = true;
 
 	/* Wakeup CPU1 only if it is not offlined */
@@ -194,9 +194,9 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 		    mpuss_can_lose_context)
 			gic_dist_disable();
 
-		RCU_NONIDLE(clkdm_deny_idle(cpu_clkdm[1]));
-		RCU_NONIDLE(omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON));
-		RCU_NONIDLE(clkdm_allow_idle(cpu_clkdm[1]));
+		clkdm_deny_idle(cpu_clkdm[1]);
+		omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON);
+		clkdm_allow_idle(cpu_clkdm[1]);
 
 		if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD) &&
 		    mpuss_can_lose_context) {
@@ -222,7 +222,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	cpu_pm_exit();
 
 cpu_pm_out:
-	RCU_NONIDLE(tick_broadcast_exit());
+	tick_broadcast_exit();
 
 fail:
 	cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
@@ -247,7 +247,8 @@ static struct cpuidle_driver omap4_idle_driver = {
 			/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
 			.exit_latency = 328 + 440,
 			.target_residency = 960,
-			.flags = CPUIDLE_FLAG_COUPLED,
+			.flags = CPUIDLE_FLAG_COUPLED |
+				 CPUIDLE_FLAG_RCU_IDLE,
 			.enter = omap_enter_idle_coupled,
 			.name = "C2",
 			.desc = "CPUx OFF, MPUSS CSWR",
@@ -256,7 +257,8 @@ static struct cpuidle_driver omap4_idle_driver = {
 			/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
 			.exit_latency = 460 + 518,
 			.target_residency = 1100,
-			.flags = CPUIDLE_FLAG_COUPLED,
+			.flags = CPUIDLE_FLAG_COUPLED |
+				 CPUIDLE_FLAG_RCU_IDLE,
 			.enter = omap_enter_idle_coupled,
 			.name = "C3",
 			.desc = "CPUx OFF, MPUSS OSWR",
@@ -282,7 +284,8 @@ static struct cpuidle_driver omap5_idle_driver = {
 			/* C2 - CPU0 RET + CPU1 RET + MPU CSWR */
 			.exit_latency = 48 + 60,
 			.target_residency = 100,
-			.flags = CPUIDLE_FLAG_TIMER_STOP,
+			.flags = CPUIDLE_FLAG_TIMER_STOP |
+				 CPUIDLE_FLAG_RCU_IDLE,
 			.enter = omap_enter_idle_smp,
 			.name = "C2",
 			.desc = "CPUx CSWR, MPUSS CSWR",
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 5a2e198e7db1..8e6d4116d49c 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -14,7 +14,6 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/of.h>
-#include <linux/pinctrl/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 59755b5a1ad7..7f387706368a 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -117,7 +117,7 @@ static struct omap_id omap_ids[] __initdata = {
 static void __iomem *tap_base;
 static u16 tap_prod_id;
 
-void omap_get_die_id(struct omap_die_id *odi)
+static void omap_get_die_id(struct omap_die_id *odi)
 {
 	if (soc_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
 		odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
@@ -793,11 +793,16 @@ void __init omap_soc_device_init(void)
 
 	soc_dev_attr->machine  = soc_name;
 	soc_dev_attr->family   = omap_get_family();
+	if (!soc_dev_attr->family) {
+		kfree(soc_dev_attr);
+		return;
+	}
 	soc_dev_attr->revision = soc_rev;
 	soc_dev_attr->custom_attr_group = omap_soc_groups[0];
 
 	soc_dev = soc_device_register(soc_dev_attr);
 	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr->family);
 		kfree(soc_dev_attr);
 		return;
 	}
diff --git a/arch/arm/mach-omap2/id.h b/arch/arm/mach-omap2/id.h
index d1735f4497e3..ded7392f0526 100644
--- a/arch/arm/mach-omap2/id.h
+++ b/arch/arm/mach-omap2/id.h
@@ -14,6 +14,4 @@ struct omap_die_id {
 	u32 id_3;
 };
 
-void omap_get_die_id(struct omap_die_id *odi);
-
 #endif
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index fba0c7aa398c..14ec3f78000b 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -32,11 +32,8 @@
 #include "clockdomain.h"
 #include "common.h"
 #include "clock.h"
-#include "clock2xxx.h"
-#include "clock3xxx.h"
 #include "sdrc.h"
 #include "control.h"
-#include "serial.h"
 #include "sram.h"
 #include "cm2xxx.h"
 #include "cm3xxx.h"
@@ -438,11 +435,6 @@ void __init omap2420_init_early(void)
 	omap_clk_soc_init = omap2420_dt_clk_init;
 	rate_table = omap2420_rate_table;
 }
-
-void __init omap2420_init_late(void)
-{
-	omap_pm_soc_init = omap2_pm_init;
-}
 #endif
 
 #ifdef CONFIG_SOC_OMAP2430
@@ -462,11 +454,6 @@ void __init omap2430_init_early(void)
 	omap_clk_soc_init = omap2430_dt_clk_init;
 	rate_table = omap2430_rate_table;
 }
-
-void __init omap2430_init_late(void)
-{
-	omap_pm_soc_init = omap2_pm_init;
-}
 #endif
 
 /*
@@ -474,7 +461,7 @@ void __init omap2430_init_late(void)
  * same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
  */
 #ifdef CONFIG_ARCH_OMAP3
-void __init omap3_init_early(void)
+static void __init omap3_init_early(void)
 {
 	omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000));
 	omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
@@ -497,12 +484,6 @@ void __init omap3430_init_early(void)
 	omap_clk_soc_init = omap3430_dt_clk_init;
 }
 
-void __init omap35xx_init_early(void)
-{
-	omap3_init_early();
-	omap_clk_soc_init = omap3430_dt_clk_init;
-}
-
 void __init omap3630_init_early(void)
 {
 	omap3_init_early();
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 9fba98c2313a..f18ef45e2fe1 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -33,6 +33,7 @@
  * and first to wake-up when MPUSS low power states are excercised
  */
 
+#include <linux/cpuidle.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/errno.h>
@@ -214,6 +215,7 @@ static void __init save_l2x0_context(void)
  * of OMAP4 MPUSS subsystem
  * @cpu : CPU ID
  * @power_state: Low power state.
+ * @rcuidle: RCU needs to be idled
  *
  * MPUSS states for the context save:
  * save_state =
@@ -222,7 +224,8 @@ static void __init save_l2x0_context(void)
  *	2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR
  *	3 - CPUx L1 and logic lost + GIC + L2 lost: DEVICE OFF
  */
-int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
+__cpuidle int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state,
+				   bool rcuidle)
 {
 	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu);
 	unsigned int save_state = 0, cpu_logic_state = PWRDM_POWER_RET;
@@ -268,6 +271,10 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 	cpu_clear_prev_logic_pwrst(cpu);
 	pwrdm_set_next_pwrst(pm_info->pwrdm, power_state);
 	pwrdm_set_logic_retst(pm_info->pwrdm, cpu_logic_state);
+
+	if (rcuidle)
+		ct_cpuidle_enter();
+
 	set_cpu_wakeup_addr(cpu, __pa_symbol(omap_pm_ops.resume));
 	omap_pm_ops.scu_prepare(cpu, power_state);
 	l2x0_pwrst_prepare(cpu, save_state);
@@ -283,6 +290,9 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 	if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD) && cpu)
 		gic_dist_enable();
 
+	if (rcuidle)
+		ct_cpuidle_exit();
+
 	/*
 	 * Restore the CPUx power state to ON otherwise CPUx
 	 * power domain can transitions to programmed low power
@@ -323,7 +333,7 @@ int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
 	omap_pm_ops.scu_prepare(cpu, power_state);
 
 	/*
-	 * CPU never retuns back if targeted power state is OFF mode.
+	 * CPU never returns back if targeted power state is OFF mode.
 	 * CPU ONLINE follows normal CPU ONLINE ptah via
 	 * omap4_secondary_startup().
 	 */
diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
index fb9c114b9dd7..c2e1aecd07cc 100644
--- a/arch/arm/mach-omap2/omap-secure.c
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -47,7 +47,7 @@ static void __init omap_optee_init_check(void)
 }
 
 /**
- * omap_sec_dispatcher: Routine to dispatch low power secure
+ * omap_secure_dispatcher - Routine to dispatch low power secure
  * service routines
  * @idx: The HAL API index
  * @flag: The flag indicating criticality of operation
@@ -118,11 +118,6 @@ int __init omap_secure_ram_reserve_memblock(void)
 	return 0;
 }
 
-phys_addr_t omap_secure_ram_mempool_base(void)
-{
-	return omap_secure_memblock_base;
-}
-
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 u32 omap3_save_secure_ram(void *addr, int size)
 {
@@ -157,7 +152,7 @@ u32 omap3_save_secure_ram(void *addr, int size)
  * NOTE: rx51_secure_dispatcher differs from omap_secure_dispatcher because
  *       it calling omap_smc3() instead omap_smc2() and param[0] is nargs+1
  */
-u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
+static u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
 			   u32 arg1, u32 arg2, u32 arg3, u32 arg4)
 {
 	static u32 param[5];
@@ -188,7 +183,7 @@ u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
 /**
  * rx51_secure_update_aux_cr: Routine to modify the contents of Auxiliary Control Register
  *  @set_bits: bits to set in ACR
- *  @clr_bits: bits to clear in ACR
+ *  @clear_bits: bits to clear in ACR
  *
  * Return the non-zero error value on failure.
 */
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index 9e67d4efdd0c..2517c4a5a0e2 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -70,13 +70,10 @@ extern void omap_smccc_smc(u32 fn, u32 arg);
 extern void omap_smc1(u32 fn, u32 arg);
 extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
 extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs);
-extern phys_addr_t omap_secure_ram_mempool_base(void);
 extern int omap_secure_ram_reserve_memblock(void);
 extern u32 save_secure_ram_context(u32 args_pa);
 extern u32 omap3_save_secure_ram(void *save_regs, int size);
 
-extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
-				  u32 arg1, u32 arg2, u32 arg3, u32 arg4);
 extern u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits);
 extern u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag);
 
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 8d21e3a3c05f..a66b1dc61571 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -374,6 +374,7 @@ static void irq_restore_context(void)
 static void irq_save_secure_context(void)
 {
 	u32 ret;
+
 	ret = omap_secure_dispatcher(OMAP4_HAL_SAVEGIC_INDEX,
 				FLAG_START_CRITICAL,
 				0, 0, 0, 0, 0);
@@ -584,9 +585,8 @@ static int __init wakeupgen_init(struct device_node *node,
 		wakeupgen_ops = &am43xx_wakeupgen_ops;
 	}
 
-	domain = irq_domain_add_hierarchy(parent_domain, 0, max_irqs,
-					  node, &wakeupgen_domain_ops,
-					  NULL);
+	domain = irq_domain_create_hierarchy(parent_domain, 0, max_irqs, of_fwnode_handle(node),
+					     &wakeupgen_domain_ops, NULL);
 	if (!domain) {
 		iounmap(wakeupgen_base);
 		return -ENOMEM;
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 6d1eb4eefefe..5d924b85b694 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -12,10 +12,9 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/irqchip.h>
-#include <linux/platform_device.h>
 #include <linux/memblock.h>
+#include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/of_platform.h>
 #include <linux/export.h>
 #include <linux/irqchip/arm-gic.h>
 #include <linux/of_address.h>
@@ -140,6 +139,7 @@ static int __init omap4_sram_init(void)
 			__func__);
 	else
 		sram_sync = (void __iomem *)gen_pool_alloc(sram_pool, PAGE_SIZE);
+	of_node_put(np);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 8b3701901991..800980057373 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -39,6 +39,12 @@
 #include "omap_device.h"
 #include "omap_hwmod.h"
 
+static struct omap_device *omap_device_alloc(struct platform_device *pdev,
+				struct omap_hwmod **ohs, int oh_cnt);
+static void omap_device_delete(struct omap_device *od);
+static struct dev_pm_domain omap_device_fail_pm_domain;
+static struct dev_pm_domain omap_device_pm_domain;
+
 /* Private functions */
 
 static void _add_clkdev(struct omap_device *od, const char *clk_alias,
@@ -238,7 +244,6 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
 	case BUS_NOTIFY_ADD_DEVICE:
 		if (pdev->dev.of_node)
 			omap_device_build_from_dt(pdev);
-		omap_auxdata_legacy_init(dev);
 		fallthrough;
 	default:
 		od = to_omap_device(pdev);
@@ -286,34 +291,6 @@ static int _omap_device_idle_hwmods(struct omap_device *od)
 /* Public functions for use by core code */
 
 /**
- * omap_device_get_context_loss_count - get lost context count
- * @pdev: The platform device to update.
- *
- * Using the primary hwmod, query the context loss count for this
- * device.
- *
- * Callers should consider context for this device lost any time this
- * function returns a value different than the value the caller got
- * the last time it called this function.
- *
- * If any hwmods exist for the omap_device associated with @pdev,
- * return the context loss counter for that hwmod, otherwise return
- * zero.
- */
-int omap_device_get_context_loss_count(struct platform_device *pdev)
-{
-	struct omap_device *od;
-	u32 ret = 0;
-
-	od = to_omap_device(pdev);
-
-	if (od->hwmods_cnt)
-		ret = omap_hwmod_get_context_loss_count(od->hwmods[0]);
-
-	return ret;
-}
-
-/**
  * omap_device_alloc - allocate an omap_device
  * @pdev: platform_device that will be included in this omap_device
  * @ohs: ptr to the omap_hwmod for this omap_device
@@ -324,7 +301,7 @@ int omap_device_get_context_loss_count(struct platform_device *pdev)
  *
  * Returns an struct omap_device pointer or ERR_PTR() on error;
  */
-struct omap_device *omap_device_alloc(struct platform_device *pdev,
+static struct omap_device *omap_device_alloc(struct platform_device *pdev,
 					struct omap_hwmod **ohs, int oh_cnt)
 {
 	int ret = -ENOMEM;
@@ -338,7 +315,7 @@ struct omap_device *omap_device_alloc(struct platform_device *pdev,
 
 	od->hwmods_cnt = oh_cnt;
 
-	hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
+	hwmods = kmemdup_array(ohs, oh_cnt, sizeof(*hwmods), GFP_KERNEL);
 	if (!hwmods)
 		goto oda_exit2;
 
@@ -361,7 +338,7 @@ oda_exit1:
 	return ERR_PTR(ret);
 }
 
-void omap_device_delete(struct omap_device *od)
+static void omap_device_delete(struct omap_device *od)
 {
 	if (!od)
 		return;
@@ -453,14 +430,14 @@ static int _od_resume_noirq(struct device *dev)
 #define _od_resume_noirq NULL
 #endif
 
-struct dev_pm_domain omap_device_fail_pm_domain = {
+static struct dev_pm_domain omap_device_fail_pm_domain = {
 	.ops = {
 		SET_RUNTIME_PM_OPS(_od_fail_runtime_suspend,
 				   _od_fail_runtime_resume, NULL)
 	}
 };
 
-struct dev_pm_domain omap_device_pm_domain = {
+static struct dev_pm_domain omap_device_pm_domain = {
 	.ops = {
 		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
 				   NULL)
@@ -592,38 +569,6 @@ int omap_device_deassert_hardreset(struct platform_device *pdev,
 	return ret;
 }
 
-/**
- * omap_device_get_by_hwmod_name() - convert a hwmod name to
- * device pointer.
- * @oh_name: name of the hwmod device
- *
- * Returns back a struct device * pointer associated with a hwmod
- * device represented by a hwmod_name
- */
-struct device *omap_device_get_by_hwmod_name(const char *oh_name)
-{
-	struct omap_hwmod *oh;
-
-	if (!oh_name) {
-		WARN(1, "%s: no hwmod name!\n", __func__);
-		return ERR_PTR(-EINVAL);
-	}
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-		WARN(1, "%s: no hwmod for %s\n", __func__,
-			oh_name);
-		return ERR_PTR(-ENODEV);
-	}
-	if (!oh->od) {
-		WARN(1, "%s: no omap_device for %s\n", __func__,
-			oh_name);
-		return ERR_PTR(-ENODEV);
-	}
-
-	return &oh->od->pdev->dev;
-}
-
 static struct notifier_block platform_nb = {
 	.notifier_call = _omap_device_notifier_call,
 };
diff --git a/arch/arm/mach-omap2/omap_device.h b/arch/arm/mach-omap2/omap_device.h
index d607532cf5e0..aa8096ecb23c 100644
--- a/arch/arm/mach-omap2/omap_device.h
+++ b/arch/arm/mach-omap2/omap_device.h
@@ -25,9 +25,6 @@
 
 #include "omap_hwmod.h"
 
-extern struct dev_pm_domain omap_device_pm_domain;
-extern struct dev_pm_domain omap_device_fail_pm_domain;
-
 /* omap_device._state values */
 #define OMAP_DEVICE_STATE_UNKNOWN	0
 #define OMAP_DEVICE_STATE_ENABLED	1
@@ -66,17 +63,6 @@ struct omap_device {
 int omap_device_enable(struct platform_device *pdev);
 int omap_device_idle(struct platform_device *pdev);
 
-/* Core code interface */
-
-struct omap_device *omap_device_alloc(struct platform_device *pdev,
-				      struct omap_hwmod **ohs, int oh_cnt);
-void omap_device_delete(struct omap_device *od);
-
-struct device *omap_device_get_by_hwmod_name(const char *oh_name);
-
-/* OMAP PM interface */
-int omap_device_get_context_loss_count(struct platform_device *pdev);
-
 /* Other */
 
 int omap_device_assert_hardreset(struct platform_device *pdev,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 31d1a21f6041..111677878d9c 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -706,9 +706,7 @@ static const struct of_device_id ti_clkctrl_match_table[] __initconst = {
 
 static int __init _setup_clkctrl_provider(struct device_node *np)
 {
-	const __be32 *addrp;
 	struct clkctrl_provider *provider;
-	u64 size;
 	int i;
 
 	provider = memblock_alloc(sizeof(*provider), SMP_CACHE_BYTES);
@@ -717,8 +715,7 @@ static int __init _setup_clkctrl_provider(struct device_node *np)
 
 	provider->node = np;
 
-	provider->num_addrs =
-		of_property_count_elems_of_size(np, "reg", sizeof(u32)) / 2;
+	provider->num_addrs = of_address_count(np);
 
 	provider->addr =
 		memblock_alloc(sizeof(void *) * provider->num_addrs,
@@ -733,11 +730,11 @@ static int __init _setup_clkctrl_provider(struct device_node *np)
 		return -ENOMEM;
 
 	for (i = 0; i < provider->num_addrs; i++) {
-		addrp = of_get_address(np, i, &size, NULL);
-		provider->addr[i] = (u32)of_translate_address(np, addrp);
-		provider->size[i] = size;
-		pr_debug("%s: %pOF: %x...%x\n", __func__, np, provider->addr[i],
-			 provider->addr[i] + provider->size[i]);
+		struct resource res;
+		of_address_to_resource(np, i, &res);
+		provider->addr[i] = res.start;
+		provider->size[i] = resource_size(&res);
+		pr_debug("%s: %pOF: %pR\n", __func__, np, &res);
 	}
 
 	list_add(&provider->link, &clkctrl_providers);
@@ -903,7 +900,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
 }
 
 /**
- * _init_opt_clk - get a struct clk * for the hwmod's optional clocks
+ * _init_opt_clks - get a struct clk * for the hwmod's optional clocks
  * @oh: struct omap_hwmod *
  *
  * Called from _init_clocks().  Populates the @oh omap_hwmod_opt_clk
@@ -2197,23 +2194,8 @@ int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
 				  struct resource *res)
 {
 	struct property *prop;
-	const __be32 *ranges;
 	const char *name;
-	u32 nr_addr, nr_size;
-	u64 base, size;
-	int len, error;
-
-	if (!res)
-		return -EINVAL;
-
-	ranges = of_get_property(np, "ranges", &len);
-	if (!ranges)
-		return -ENOENT;
-
-	len /= sizeof(*ranges);
-
-	if (len < 3)
-		return -EINVAL;
+	int err;
 
 	of_property_for_each_string(np, "compatible", prop, name)
 		if (!strncmp("ti,sysc-", name, 8))
@@ -2222,26 +2204,12 @@ int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
 	if (!name)
 		return -ENOENT;
 
-	error = of_property_read_u32(np, "#address-cells", &nr_addr);
-	if (error)
-		return -ENOENT;
-
-	error = of_property_read_u32(np, "#size-cells", &nr_size);
-	if (error)
-		return -ENOENT;
+	err = of_range_to_resource(np, 0, res);
+	if (err)
+		return err;
 
-	if (nr_addr != 1 || nr_size != 1) {
-		pr_err("%s: invalid range for %s->%pOFn\n", __func__,
-		       oh->name, np);
-		return -EINVAL;
-	}
-
-	ranges++;
-	base = of_translate_address(np, ranges++);
-	size = be32_to_cpup(ranges);
-
-	pr_debug("omap_hwmod: %s %pOFn at 0x%llx size 0x%llx\n",
-		 oh->name, np, base, size);
+	pr_debug("omap_hwmod: %s %pOFn at %pR\n",
+		 oh->name, np, res);
 
 	if (oh && oh->mpu_rt_idx) {
 		omap_hwmod_fix_mpu_rt_idx(oh, np, res);
@@ -2249,10 +2217,6 @@ int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
 		return 0;
 	}
 
-	res->start = base;
-	res->end = base + size - 1;
-	res->flags = IORESOURCE_MEM;
-
 	return 0;
 }
 
@@ -2322,18 +2286,18 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
 static void __init parse_module_flags(struct omap_hwmod *oh,
 				      struct device_node *np)
 {
-	if (of_find_property(np, "ti,no-reset-on-init", NULL))
+	if (of_property_read_bool(np, "ti,no-reset-on-init"))
 		oh->flags |= HWMOD_INIT_NO_RESET;
-	if (of_find_property(np, "ti,no-idle-on-init", NULL))
+	if (of_property_read_bool(np, "ti,no-idle-on-init"))
 		oh->flags |= HWMOD_INIT_NO_IDLE;
-	if (of_find_property(np, "ti,no-idle", NULL))
+	if (of_property_read_bool(np, "ti,no-idle"))
 		oh->flags |= HWMOD_NO_IDLE;
 }
 
 /**
  * _init - initialize internal data for the hwmod @oh
  * @oh: struct omap_hwmod *
- * @n: (unused)
+ * @data: (unused)
  *
  * Look up the clocks and the address space used by the MPU to access
  * registers belonging to the hwmod @oh.  @oh must already be
@@ -2529,7 +2493,7 @@ static void _setup_postsetup(struct omap_hwmod *oh)
 /**
  * _setup - prepare IP block hardware for use
  * @oh: struct omap_hwmod *
- * @n: (unused, pass NULL)
+ * @data: (unused, pass NULL)
  *
  * Configure the IP block represented by @oh.  This may include
  * enabling the IP block, resetting it, and placing it into a
@@ -3054,6 +3018,8 @@ int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois)
 	return 0;
 }
 
+static int __init omap_hwmod_setup_one(const char *oh_name);
+
 /**
  * _ensure_mpu_hwmod_is_setup - ensure the MPU SS hwmod is init'ed and set up
  * @oh: pointer to the hwmod currently being set up (usually not the MPU)
@@ -3084,7 +3050,7 @@ static void __init _ensure_mpu_hwmod_is_setup(struct omap_hwmod *oh)
  * registered omap_hwmod.  Also calls _setup() on each hwmod.  Returns
  * -EINVAL upon error or 0 upon success.
  */
-int __init omap_hwmod_setup_one(const char *oh_name)
+static int __init omap_hwmod_setup_one(const char *oh_name)
 {
 	struct omap_hwmod *oh;
 
@@ -3401,8 +3367,9 @@ static int omap_hwmod_check_module(struct device *dev,
  * omap_hwmod_allocate_module - allocate new module
  * @dev: struct device
  * @oh: module
+ * @data: module data
  * @sysc_fields: sysc register bits
- * @clockdomain: clockdomain
+ * @clkdm: clockdomain
  * @rev_offs: revision register offset
  * @sysc_offs: sysconfig register offset
  * @syss_offs: sysstatus register offset
@@ -3455,7 +3422,7 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
 	}
 
 	if (list_empty(&oh->slave_ports)) {
-		oi = kcalloc(1, sizeof(*oi), GFP_KERNEL);
+		oi = kzalloc(sizeof(*oi), GFP_KERNEL);
 		if (!oi)
 			goto out_free_class;
 
@@ -3764,55 +3731,6 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh)
  */
 
 /**
- * omap_hwmod_get_pwrdm - return pointer to this module's main powerdomain
- * @oh: struct omap_hwmod *
- *
- * Return the powerdomain pointer associated with the OMAP module
- * @oh's main clock.  If @oh does not have a main clk, return the
- * powerdomain associated with the interface clock associated with the
- * module's MPU port. (XXX Perhaps this should use the SDMA port
- * instead?)  Returns NULL on error, or a struct powerdomain * on
- * success.
- */
-struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
-{
-	struct clk *c;
-	struct omap_hwmod_ocp_if *oi;
-	struct clockdomain *clkdm;
-	struct clk_hw_omap *clk;
-	struct clk_hw *hw;
-
-	if (!oh)
-		return NULL;
-
-	if (oh->clkdm)
-		return oh->clkdm->pwrdm.ptr;
-
-	if (oh->_clk) {
-		c = oh->_clk;
-	} else {
-		oi = _find_mpu_rt_port(oh);
-		if (!oi)
-			return NULL;
-		c = oi->_clk;
-	}
-
-	hw = __clk_get_hw(c);
-	if (!hw)
-		return NULL;
-
-	clk = to_clk_hw_omap(hw);
-	if (!clk)
-		return NULL;
-
-	clkdm = clk->clkdm;
-	if (!clkdm)
-		return NULL;
-
-	return clkdm->pwrdm.ptr;
-}
-
-/**
  * omap_hwmod_get_mpu_rt_va - return the module's base address (for the MPU)
  * @oh: struct omap_hwmod *
  *
@@ -3978,32 +3896,6 @@ ohsps_unlock:
 }
 
 /**
- * omap_hwmod_get_context_loss_count - get lost context count
- * @oh: struct omap_hwmod *
- *
- * Returns the context loss count of associated @oh
- * upon success, or zero if no context loss data is available.
- *
- * On OMAP4, this queries the per-hwmod context loss register,
- * assuming one exists.  If not, or on OMAP2/3, this queries the
- * enclosing powerdomain context loss count.
- */
-int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
-{
-	struct powerdomain *pwrdm;
-	int ret = 0;
-
-	if (soc_ops.get_context_lost)
-		return soc_ops.get_context_lost(oh);
-
-	pwrdm = omap_hwmod_get_pwrdm(oh);
-	if (pwrdm)
-		ret = pwrdm_get_context_loss_count(pwrdm);
-
-	return ret;
-}
-
-/**
  * omap_hwmod_init - initialize the hwmod code
  *
  * Sets up some function pointers needed by the hwmod code to operate on the
@@ -4054,18 +3946,3 @@ void __init omap_hwmod_init(void)
 
 	inited = true;
 }
-
-/**
- * omap_hwmod_get_main_clk - get pointer to main clock name
- * @oh: struct omap_hwmod *
- *
- * Returns the main clock name assocated with @oh upon success,
- * or NULL if @oh is NULL.
- */
-const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh)
-{
-	if (!oh)
-		return NULL;
-
-	return oh->main_clk;
-}
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 6962a8d267e7..dcab7a01c10e 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -615,7 +615,6 @@ struct omap_hwmod *omap_hwmod_lookup(const char *name);
 int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
 			void *data);
 
-int __init omap_hwmod_setup_one(const char *name);
 int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
 				  struct device_node *np,
 				  struct resource *res);
@@ -638,12 +637,6 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
 u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
 int omap_hwmod_softreset(struct omap_hwmod *oh);
 
-int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags);
-int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
-int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
-				   const char *name, struct resource *res);
-
-struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
 void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
 
 int omap_hwmod_for_each_by_class(const char *classname,
@@ -652,12 +645,9 @@ int omap_hwmod_for_each_by_class(const char *classname,
 				 void *user);
 
 int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
-int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
 
 extern void __init omap_hwmod_init(void);
 
-const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
-
 #else	/* CONFIG_OMAP_HWMOD */
 
 static inline int
@@ -670,25 +660,14 @@ omap_hwmod_for_each_by_class(const char *classname,
 #endif	/* CONFIG_OMAP_HWMOD */
 
 /*
- *
- */
-
-void omap_hwmod_rtc_unlock(struct omap_hwmod *oh);
-void omap_hwmod_rtc_lock(struct omap_hwmod *oh);
-
-/*
  * Chip variant-specific hwmod init routines - XXX should be converted
  * to use initcalls once the initial boot ordering is straightened out
  */
 extern int omap2420_hwmod_init(void);
 extern int omap2430_hwmod_init(void);
 extern int omap3xxx_hwmod_init(void);
-extern int omap44xx_hwmod_init(void);
-extern int am33xx_hwmod_init(void);
 extern int dm814x_hwmod_init(void);
 extern int dm816x_hwmod_init(void);
-extern int dra7xx_hwmod_init(void);
-int am43xx_hwmod_init(void);
 
 extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 558fae4375ba..dbd9dc9f0962 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -22,7 +22,6 @@
 #include "prm-regbits-24xx.h"
 #include "i2c.h"
 #include "mmc.h"
-#include "serial.h"
 #include "wd_timer.h"
 
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index 2581b8a5f866..67f1f38909d9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -62,7 +62,7 @@ struct omap_hwmod_class iva_hwmod_class = {
 	.name = "iva",
 };
 
-struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = {
+static struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = {
 	.rev_offs	= 0x0,
 	.sysc_offs	= 0x14,
 	.syss_offs	= 0x18,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
index 518e877bb2a1..761d34914ed9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
@@ -13,7 +13,6 @@
 #include "omap_hwmod.h"
 #include "l3_2xxx.h"
 #include "l4_2xxx.h"
-#include "serial.h"
 
 #include "omap_hwmod_common_data.h"
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index 9156f2bfbc8d..4982e04ead53 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -30,7 +30,7 @@ static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = {
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-struct omap_hwmod_class omap2_dispc_hwmod_class = {
+static struct omap_hwmod_class omap2_dispc_hwmod_class = {
 	.name	= "dispc",
 	.sysc	= &omap2_dispc_sysc,
 };
@@ -47,7 +47,7 @@ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = {
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-struct omap_hwmod_class omap2xxx_timer_hwmod_class = {
+static struct omap_hwmod_class omap2xxx_timer_hwmod_class = {
 	.name	= "timer",
 	.sysc	= &omap2xxx_timer_sysc,
 };
@@ -67,7 +67,7 @@ static struct omap_hwmod_class_sysconfig omap2xxx_wd_timer_sysc = {
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class = {
+static struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class = {
 	.name		= "wd_timer",
 	.sysc		= &omap2xxx_wd_timer_sysc,
 	.pre_shutdown	= &omap2_wd_timer_disable,
@@ -189,12 +189,6 @@ struct omap_hwmod omap2xxx_mpu_hwmod = {
 	.main_clk	= "mpu_ck",
 };
 
-/* IVA2 */
-struct omap_hwmod omap2xxx_iva_hwmod = {
-	.name		= "iva",
-	.class		= &iva_hwmod_class,
-};
-
 /* timer3 */
 struct omap_hwmod omap2xxx_timer3_hwmod = {
 	.name		= "timer3",
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index b6c7d98a9eff..5cbdf58ad59f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -27,7 +27,6 @@
 
 #include "i2c.h"
 #include "wd_timer.h"
-#include "serial.h"
 
 /*
  * OMAP3xxx hardware module integration data
@@ -1135,65 +1134,6 @@ static struct omap_hwmod omap34xx_mcspi4 = {
 	.class		= &omap34xx_mcspi_class,
 };
 
-/* usbhsotg */
-static struct omap_hwmod_class_sysconfig omap3xxx_usbhsotg_sysc = {
-	.rev_offs	= 0x0400,
-	.sysc_offs	= 0x0404,
-	.syss_offs	= 0x0408,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE|
-			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			  SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class usbotg_class = {
-	.name = "usbotg",
-	.sysc = &omap3xxx_usbhsotg_sysc,
-};
-
-/* usb_otg_hs */
-
-static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
-	.name		= "usb_otg_hs",
-	.main_clk	= "hsotgusb_ick",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT,
-		},
-	},
-	.class		= &usbotg_class,
-
-	/*
-	 * Erratum ID: i479  idle_req / idle_ack mechanism potentially
-	 * broken when autoidle is enabled
-	 * workaround is to disable the autoidle bit at module level.
-	 *
-	 * Enabling the device in any other MIDLEMODE setting but force-idle
-	 * causes core_pwrdm not enter idle states at least on OMAP3630.
-	 * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY
-	 * signal when MIDLEMODE is set to force-idle.
-	 */
-	.flags		= HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE |
-			  HWMOD_FORCE_MSTANDBY | HWMOD_RECONFIG_IO_CHAIN,
-};
-
-/* usb_otg_hs */
-
-static struct omap_hwmod_class am35xx_usbotg_class = {
-	.name = "am35xx_usbotg",
-};
-
-static struct omap_hwmod am35xx_usbhsotg_hwmod = {
-	.name		= "am35x_otg_hs",
-	.main_clk	= "hsotgusb_fck",
-	.class		= &am35xx_usbotg_class,
-	.flags		= HWMOD_NO_IDLEST,
-};
-
 /* MMC/SD/SDIO common */
 static struct omap_hwmod_class_sysconfig omap34xx_mmc_sysc = {
 	.rev_offs	= 0x1fc,
@@ -1561,22 +1501,6 @@ static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_core -> usbhsotg interface */
-static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = {
-	.master		= &omap3xxx_usbhsotg_hwmod,
-	.slave		= &omap3xxx_l3_main_hwmod,
-	.clk		= "core_l3_ick",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_core -> am35xx_usbhsotg interface */
-static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = {
-	.master		= &am35xx_usbhsotg_hwmod,
-	.slave		= &omap3xxx_l3_main_hwmod,
-	.clk		= "hsotgusb_ick",
-	.user		= OCP_USER_MPU,
-};
-
 /* l3_core -> sad2d interface */
 static struct omap_hwmod_ocp_if omap3xxx_sad2d__l3 = {
 	.master		= &omap3xxx_sad2d_hwmod,
@@ -1758,24 +1682,6 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr2 = {
 	.user		= OCP_USER_MPU,
 };
 
-
-/* l4_core -> usbhsotg  */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__usbhsotg = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_usbhsotg_hwmod,
-	.clk		= "l4_ick",
-	.user		= OCP_USER_MPU,
-};
-
-
-/* l4_core -> usbhsotg  */
-static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &am35xx_usbhsotg_hwmod,
-	.clk		= "hsotgusb_ick",
-	.user		= OCP_USER_MPU,
-};
-
 /* L4_WKUP -> L4_SEC interface */
 static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__l4_sec = {
 	.master = &omap3xxx_l4_wkup_hwmod,
@@ -1945,7 +1851,7 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_rfbi = {
 	.fw = {
 		.omap2 = {
 			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_RFBI_REGION,
-			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP ,
+			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
 			.flags	= OMAP_FIREWALL_L4,
 		},
 	},
@@ -2266,7 +2172,7 @@ static struct omap_hwmod am35xx_emac_hwmod = {
 	/*
 	 * According to Mark Greer, the MPU will not return from WFI
 	 * when the EMAC signals an interrupt.
-	 * http://www.spinics.net/lists/arm-kernel/msg174734.html
+	 * https://lore.kernel.org/all/1336770778-23044-3-git-send-email-mgreer@animalcreek.com/
 	 */
 	.flags		= (HWMOD_NO_IDLEST | HWMOD_BLOCK_WFI),
 };
@@ -2440,13 +2346,12 @@ static struct omap_hwmod_ocp_if *omap36xx_sham_hwmod_ocp_ifs[] __initdata = {
 	NULL
 };
 
-
 /*
  * Apparently the SHA/MD5 and AES accelerator IP blocks are
  * only present on some AM35xx chips, and no one knows which
- * ones.  See
- * http://www.spinics.net/lists/arm-kernel/msg215466.html So
- * if you need these IP blocks on an AM35xx, try uncommenting
+ * ones.
+ * See https://lore.kernel.org/all/20130108203853.GB1876@animalcreek.com/
+ * So if you need these IP blocks on an AM35xx, try uncommenting
  * the following lines.
  */
 static struct omap_hwmod_ocp_if *am35xx_sham_hwmod_ocp_ifs[] __initdata = {
@@ -2465,8 +2370,6 @@ static struct omap_hwmod_ocp_if *omap3430es1_hwmod_ocp_ifs[] __initdata = {
 static struct omap_hwmod_ocp_if *omap3430es2plus_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_dss__l3,
 	&omap3xxx_l4_core__dss,
-	&omap3xxx_usbhsotg__l3,
-	&omap3xxx_l4_core__usbhsotg,
 	&omap3xxx_usb_host_hs__l3_main_2,
 	&omap3xxx_l4_core__usb_host_hs,
 	&omap3xxx_l4_core__usb_tll_hs,
@@ -2509,8 +2412,6 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_core__dss,
 	&omap36xx_l4_core__sr1,
 	&omap36xx_l4_core__sr2,
-	&omap3xxx_usbhsotg__l3,
-	&omap3xxx_l4_core__usbhsotg,
 	&omap3xxx_l4_core__mailbox,
 	&omap3xxx_usb_host_hs__l3_main_2,
 	&omap3xxx_l4_core__usb_host_hs,
@@ -2528,8 +2429,6 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
 static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_dss__l3,
 	&omap3xxx_l4_core__dss,
-	&am35xx_usbhsotg__l3,
-	&am35xx_l4_core__usbhsotg,
 	&am35xx_l4_core__uart4,
 	&omap3xxx_usb_host_hs__l3_main_2,
 	&omap3xxx_l4_core__usb_host_hs,
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c
index 246f1e5da99f..439232233c39 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c
@@ -20,7 +20,7 @@
 
 #include "omap_hwmod_common_data.h"
 
-/**
+/*
  * struct omap_hwmod_sysc_type1 - TYPE1 sysconfig scheme.
  *
  * To be used by hwmod structure to specify the sysconfig offsets
@@ -36,7 +36,7 @@ struct sysc_regbits omap_hwmod_sysc_type1 = {
 	.autoidle_shift	= SYSC_TYPE1_AUTOIDLE_SHIFT,
 };
 
-/**
+/*
  * struct omap_hwmod_sysc_type2 - TYPE2 sysconfig scheme.
  *
  * To be used by hwmod structure to specify the sysconfig offsets if the
@@ -50,7 +50,7 @@ struct sysc_regbits omap_hwmod_sysc_type2 = {
 	.dmadisable_shift = SYSC_TYPE2_DMADISABLE_SHIFT,
 };
 
-/**
+/*
  * struct omap_hwmod_sysc_type3 - TYPE3 sysconfig scheme.
  * Used by some IPs on AM33xx
  */
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index 0045e6680a63..69dddc53e1d8 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -20,7 +20,6 @@ extern struct omap_hwmod omap2xxx_l3_main_hwmod;
 extern struct omap_hwmod omap2xxx_l4_core_hwmod;
 extern struct omap_hwmod omap2xxx_l4_wkup_hwmod;
 extern struct omap_hwmod omap2xxx_mpu_hwmod;
-extern struct omap_hwmod omap2xxx_iva_hwmod;
 extern struct omap_hwmod omap2xxx_timer3_hwmod;
 extern struct omap_hwmod omap2xxx_timer4_hwmod;
 extern struct omap_hwmod omap2xxx_timer5_hwmod;
@@ -60,7 +59,6 @@ extern struct omap_hwmod_ocp_if omap2_l4_core__uart2;
 extern struct omap_hwmod_ocp_if omap2_l4_core__uart3;
 extern struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi1;
 extern struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi2;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer2;
 extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer3;
 extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer4;
 extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer5;
@@ -86,14 +84,10 @@ extern struct omap_hwmod_class mpu_hwmod_class;
 extern struct omap_hwmod_class iva_hwmod_class;
 extern struct omap_hwmod_class omap2_uart_class;
 extern struct omap_hwmod_class omap2_dss_hwmod_class;
-extern struct omap_hwmod_class omap2_dispc_hwmod_class;
 extern struct omap_hwmod_class omap2_rfbi_hwmod_class;
 extern struct omap_hwmod_class omap2_venc_hwmod_class;
-extern struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc;
 extern struct omap_hwmod_class omap2_hdq1w_class;
 
-extern struct omap_hwmod_class omap2xxx_timer_hwmod_class;
-extern struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_gpio_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_mcspi_class;
diff --git a/arch/arm/mach-omap2/omap_hwmod_reset.c b/arch/arm/mach-omap2/omap_hwmod_reset.c
deleted file mode 100644
index 143623bb056d..000000000000
--- a/arch/arm/mach-omap2/omap_hwmod_reset.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * OMAP IP block custom reset and preprogramming stubs
- *
- * Copyright (C) 2012 Texas Instruments, Inc.
- * Paul Walmsley
- *
- * A small number of IP blocks need custom reset and preprogramming
- * functions.  The stubs in this file provide a standard way for the
- * hwmod code to call these functions, which are to be located under
- * drivers/.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-
-#include "omap_hwmod.h"
-#include "common.h"
-
-#define OMAP_RTC_STATUS_REG	0x44
-#define OMAP_RTC_KICK0_REG	0x6c
-#define OMAP_RTC_KICK1_REG	0x70
-
-#define OMAP_RTC_KICK0_VALUE	0x83E70B13
-#define OMAP_RTC_KICK1_VALUE	0x95A4F1E0
-#define OMAP_RTC_STATUS_BUSY	BIT(0)
-#define OMAP_RTC_MAX_READY_TIME	50
-
-/**
- * omap_rtc_wait_not_busy - Wait for the RTC BUSY flag
- * @oh: struct omap_hwmod *
- *
- * For updating certain RTC registers, the MPU must wait
- * for the BUSY status in OMAP_RTC_STATUS_REG to become zero.
- * Once the BUSY status is zero, there is a 15 microseconds access
- * period in which the MPU can program.
- */
-static void omap_rtc_wait_not_busy(struct omap_hwmod *oh)
-{
-	int i;
-
-	/* BUSY may stay active for 1/32768 second (~30 usec) */
-	omap_test_timeout(omap_hwmod_read(oh, OMAP_RTC_STATUS_REG)
-			  & OMAP_RTC_STATUS_BUSY, OMAP_RTC_MAX_READY_TIME, i);
-	/* now we have ~15 microseconds to read/write various registers */
-}
-
-/**
- * omap_hwmod_rtc_unlock - Unlock the Kicker mechanism.
- * @oh: struct omap_hwmod *
- *
- * RTC IP have kicker feature. This prevents spurious writes to its registers.
- * In order to write into any of the RTC registers, KICK values has te be
- * written in respective KICK registers. This is needed for hwmod to write into
- * sysconfig register.
- */
-void omap_hwmod_rtc_unlock(struct omap_hwmod *oh)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	omap_rtc_wait_not_busy(oh);
-	omap_hwmod_write(OMAP_RTC_KICK0_VALUE, oh, OMAP_RTC_KICK0_REG);
-	omap_hwmod_write(OMAP_RTC_KICK1_VALUE, oh, OMAP_RTC_KICK1_REG);
-	local_irq_restore(flags);
-}
-
-/**
- * omap_hwmod_rtc_lock - Lock the Kicker mechanism.
- * @oh: struct omap_hwmod *
- *
- * RTC IP have kicker feature. This prevents spurious writes to its registers.
- * Once the RTC registers are written, KICK mechanism needs to be locked,
- * in order to prevent any spurious writes. This function locks back the RTC
- * registers once hwmod completes its write into sysconfig register.
- */
-void omap_hwmod_rtc_lock(struct omap_hwmod *oh)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	omap_rtc_wait_not_busy(oh);
-	omap_hwmod_write(0x0, oh, OMAP_RTC_KICK0_REG);
-	omap_hwmod_write(0x0, oh, OMAP_RTC_KICK1_REG);
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h
index 88375ab38e31..ed84fe95e857 100644
--- a/arch/arm/mach-omap2/omap_opp_data.h
+++ b/arch/arm/mach-omap2/omap_opp_data.h
@@ -71,11 +71,6 @@ struct omap_opp_def {
 	.vp_errgain	= _errgain				       \
 }
 
-/* Use this to initialize the default table */
-extern int __init omap_init_opp_table(struct omap_opp_def *opp_def,
-		u32 opp_def_size);
-
-
 extern struct omap_volt_data omap34xx_vddmpu_volt_data[];
 extern struct omap_volt_data omap34xx_vddcore_volt_data[];
 extern struct omap_volt_data omap36xx_vddmpu_volt_data[];
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index 6f6a6a66c981..a1d001170a68 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -1,11 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
-  * This file configures the internal USB PHY in OMAP4430. Used
-  * with TWL6030 transceiver and MUSB on OMAP4430.
-  *
-  * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com
-  * Author: Hema HK <hemahk@ti.com>
-  */
+ * This file configures the internal USB PHY in OMAP4430. Used
+ * with TWL6030 transceiver and MUSB on OMAP4430.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com
+ * Author: Hema HK <hemahk@ti.com>
+ */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
@@ -19,7 +19,6 @@
 
 #include "soc.h"
 #include "control.h"
-#include "usb.h"
 
 #define CONTROL_DEV_CONF		0x300
 #define PHY_PD				0x1
@@ -52,89 +51,3 @@ static int __init omap4430_phy_power_down(void)
 	return 0;
 }
 omap_early_initcall(omap4430_phy_power_down);
-
-void am35x_musb_reset(void)
-{
-	u32	regval;
-
-	/* Reset the musb interface */
-	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-
-	regval |= AM35XX_USBOTGSS_SW_RST;
-	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
-
-	regval &= ~AM35XX_USBOTGSS_SW_RST;
-	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
-
-	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-}
-
-void am35x_musb_phy_power(u8 on)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(100);
-	u32 devconf2;
-
-	if (on) {
-		/*
-		 * Start the on-chip PHY and its PLL.
-		 */
-		devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-		devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
-		devconf2 |= CONF2_PHY_PLLON;
-
-		omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-
-		pr_info("Waiting for PHY clock good...\n");
-		while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
-				& CONF2_PHYCLKGD)) {
-			cpu_relax();
-
-			if (time_after(jiffies, timeout)) {
-				pr_err("musb PHY clock good timed out\n");
-				break;
-			}
-		}
-	} else {
-		/*
-		 * Power down the on-chip PHY.
-		 */
-		devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-		devconf2 &= ~CONF2_PHY_PLLON;
-		devconf2 |=  CONF2_PHYPWRDN | CONF2_OTGPWRDN;
-		omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-	}
-}
-
-void am35x_musb_clear_irq(void)
-{
-	u32 regval;
-
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval |= AM35XX_USBOTGSS_INT_CLR;
-	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-}
-
-void am35x_set_mode(u8 musb_mode)
-{
-	u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-	devconf2 &= ~CONF2_OTGMODE;
-	switch (musb_mode) {
-	case MUSB_HOST:		/* Force VBUS valid, ID = 0 */
-		devconf2 |= CONF2_FORCE_HOST;
-		break;
-	case MUSB_PERIPHERAL:	/* Force VBUS valid, ID = 1 */
-		devconf2 |= CONF2_FORCE_DEVICE;
-		break;
-	case MUSB_OTG:		/* Don't override the VBUS/ID comparators */
-		devconf2 |= CONF2_NO_OVERRIDE;
-		break;
-	default:
-		pr_info("Unsupported mode %u\n", musb_mode);
-	}
-
-	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-}
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 5b99d602c87b..b947bacf23a3 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -6,11 +6,11 @@
  */
 #include <linux/clk.h>
 #include <linux/davinci_emac.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
-#include <linux/wl12xx.h>
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
 #include <linux/power/smartreflex.h>
@@ -41,7 +41,6 @@ struct pdata_init {
 };
 
 static struct of_dev_auxdata omap_auxdata_lookup[];
-static struct twl4030_gpio_platform_data twl_gpio_auxdata;
 
 #ifdef CONFIG_MACH_NOKIA_N8X0
 static void __init omap2420_n8x0_legacy_init(void)
@@ -98,52 +97,43 @@ static struct iommu_platform_data omap3_iommu_isp_pdata = {
 };
 #endif
 
-static int omap3_sbc_t3730_twl_callback(struct device *dev,
-					   unsigned gpio,
-					   unsigned ngpio)
+static void __init omap3_sbc_t3x_usb_hub_init(char *hub_name, int idx)
 {
-	int res;
+	struct gpio_desc *d;
 
-	res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
-			       "wlan pwr");
-	if (res)
-		return res;
-
-	gpio_export(gpio, 0);
-
-	return 0;
-}
-
-static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
-{
-	int err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, hub_name);
-
-	if (err) {
-		pr_err("SBC-T3x: %s reset gpio request failed: %d\n",
-			hub_name, err);
+	/* This asserts the RESET line (reverse polarity) */
+	d = gpiod_get_index(NULL, "reset", idx, GPIOD_OUT_HIGH);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get T3x USB reset GPIO descriptor\n");
 		return;
 	}
-
-	gpio_export(gpio, 0);
-
+	gpiod_set_consumer_name(d, hub_name);
+	gpiod_export(d, 0);
 	udelay(10);
-	gpio_set_value(gpio, 1);
+	/* De-assert RESET */
+	gpiod_set_value(d, 0);
 	msleep(1);
 }
 
-static void __init omap3_sbc_t3730_twl_init(void)
-{
-	twl_gpio_auxdata.setup = omap3_sbc_t3730_twl_callback;
-}
+static struct gpiod_lookup_table omap3_sbc_t3x_usb_gpio_table = {
+	.dev_id = NULL,
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-160-175", 7, "reset", 0,
+				GPIO_ACTIVE_LOW),
+		{ }
+	},
+};
 
 static void __init omap3_sbc_t3730_legacy_init(void)
 {
-	omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
+	gpiod_add_lookup_table(&omap3_sbc_t3x_usb_gpio_table);
+	omap3_sbc_t3x_usb_hub_init("sb-t35 usb hub", 0);
 }
 
 static void __init omap3_sbc_t3530_legacy_init(void)
 {
-	omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
+	gpiod_add_lookup_table(&omap3_sbc_t3x_usb_gpio_table);
+	omap3_sbc_t3x_usb_hub_init("sb-t35 usb hub", 0);
 }
 
 static void __init omap3_evm_legacy_init(void)
@@ -187,31 +177,59 @@ static void __init am35xx_emac_reset(void)
 	omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
 }
 
-static struct gpio cm_t3517_wlan_gpios[] __initdata = {
-	{ 56,	GPIOF_OUT_INIT_HIGH,	"wlan pwr" },
-	{ 4,	GPIOF_OUT_INIT_HIGH,	"xcvr noe" },
+static struct gpiod_lookup_table cm_t3517_wlan_gpio_table = {
+	.dev_id = NULL,
+	.table = {
+		GPIO_LOOKUP("gpio-48-53", 8, "power",
+			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-0-15", 4, "noe",
+			    GPIO_ACTIVE_HIGH),
+		{ }
+	},
 };
 
 static void __init omap3_sbc_t3517_wifi_init(void)
 {
-	int err = gpio_request_array(cm_t3517_wlan_gpios,
-				ARRAY_SIZE(cm_t3517_wlan_gpios));
-	if (err) {
-		pr_err("SBC-T3517: wl12xx gpios request failed: %d\n", err);
-		return;
-	}
+	struct gpio_desc *d;
+
+	gpiod_add_lookup_table(&cm_t3517_wlan_gpio_table);
 
-	gpio_export(cm_t3517_wlan_gpios[0].gpio, 0);
-	gpio_export(cm_t3517_wlan_gpios[1].gpio, 0);
+	/* This asserts the RESET line (reverse polarity) */
+	d = gpiod_get(NULL, "power", GPIOD_OUT_HIGH);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get CM T3517 WLAN power GPIO descriptor\n");
+	} else {
+		gpiod_set_consumer_name(d, "wlan pwr");
+		gpiod_export(d, 0);
+	}
 
+	d = gpiod_get(NULL, "noe", GPIOD_OUT_HIGH);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get CM T3517 WLAN XCVR NOE GPIO descriptor\n");
+	} else {
+		gpiod_set_consumer_name(d, "xcvr noe");
+		gpiod_export(d, 0);
+	}
 	msleep(100);
-	gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0);
-}
+	gpiod_set_value(d, 0);
+}
+
+static struct gpiod_lookup_table omap3_sbc_t3517_usb_gpio_table = {
+	.dev_id = NULL,
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-144-159", 8, "reset", 0,
+				GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-96-111", 2, "reset", 1,
+				GPIO_ACTIVE_LOW),
+		{ }
+	},
+};
 
 static void __init omap3_sbc_t3517_legacy_init(void)
 {
-	omap3_sbc_t3x_usb_hub_init(152, "cm-t3517 usb hub");
-	omap3_sbc_t3x_usb_hub_init(98, "sb-t35 usb hub");
+	gpiod_add_lookup_table(&omap3_sbc_t3517_usb_gpio_table);
+	omap3_sbc_t3x_usb_hub_init("cm-t3517 usb hub", 0);
+	omap3_sbc_t3x_usb_hub_init("sb-t35 usb hub", 1);
 	am35xx_emac_reset();
 	hsmmc2_internal_input_clk();
 	omap3_sbc_t3517_wifi_init();
@@ -257,9 +275,19 @@ static struct platform_device pandora_backlight = {
 	.id	= -1,
 };
 
+static struct gpiod_lookup_table pandora_soc_audio_gpios = {
+	.dev_id = "soc-audio",
+	.table = {
+		GPIO_LOOKUP("gpio-112-127", 6, "dac", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-0-15", 14, "amp", GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
 static void __init omap3_pandora_legacy_init(void)
 {
 	platform_device_register(&pandora_backlight);
+	gpiod_add_lookup_table(&pandora_soc_audio_gpios);
 }
 #endif /* CONFIG_ARCH_OMAP3 */
 
@@ -393,21 +421,6 @@ static struct ti_prm_platform_data ti_prm_pdata = {
 	.clkdm_lookup = clkdm_lookup,
 };
 
-/*
- * GPIOs for TWL are initialized by the I2C bus and need custom
- * handing until DSS has device tree bindings.
- */
-void omap_auxdata_legacy_init(struct device *dev)
-{
-	if (dev->platform_data)
-		return;
-
-	if (strcmp("twl4030-gpio", dev_name(dev)))
-		return;
-
-	dev->platform_data = &twl_gpio_auxdata;
-}
-
 #if defined(CONFIG_ARCH_OMAP3) && IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP)
 static struct omap_mcbsp_platform_data mcbsp_pdata;
 static void __init omap3_mcbsp_init(void)
@@ -428,9 +441,6 @@ static struct pdata_init auxdata_quirks[] __initdata = {
 	{ "nokia,n810", omap2420_n8x0_legacy_init, },
 	{ "nokia,n810-wimax", omap2420_n8x0_legacy_init, },
 #endif
-#ifdef CONFIG_ARCH_OMAP3
-	{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_twl_init, },
-#endif
 	{ /* sentinel */ },
 };
 
@@ -440,7 +450,6 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
 #ifdef CONFIG_MACH_NOKIA_N8X0
 	OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
 	OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data),
-	OF_DEV_AUXDATA("tlv320aic3x", 0x18, "2-0018", &n810_aic33_data),
 #endif
 #ifdef CONFIG_ARCH_OMAP3
 	OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index da829a90fe8c..700869c9eae1 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -54,12 +54,6 @@ static struct omap2_oscillator oscillator = {
 	.shutdown_time = ULONG_MAX,
 };
 
-void omap_pm_setup_oscillator(u32 tstart, u32 tshut)
-{
-	oscillator.startup_time = tstart;
-	oscillator.shutdown_time = tshut;
-}
-
 void omap_pm_get_oscillator(u32 *tstart, u32 *tshut)
 {
 	if (!tstart || !tshut)
@@ -140,7 +134,7 @@ int __maybe_unused omap_pm_nop_init(void)
 
 int (*omap_pm_soc_init)(void);
 
-int __init omap2_common_pm_late_init(void)
+static int __init omap2_common_pm_late_init(void)
 {
 	int error;
 
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 80e84ae66aee..f97ff93f2fb4 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -29,23 +29,9 @@ static inline int omap4_idle_init(void)
 
 extern void *omap3_secure_ram_storage;
 extern void omap3_pm_off_mode_enable(int);
-extern void omap_sram_idle(void);
+extern void omap_sram_idle(bool rcuidle);
 extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused);
 
-#if defined(CONFIG_PM_OPP)
-extern int omap3_opp_init(void);
-extern int omap4_opp_init(void);
-#else
-static inline int omap3_opp_init(void)
-{
-	return -EINVAL;
-}
-static inline int omap4_opp_init(void)
-{
-	return -EINVAL;
-}
-#endif
-
 extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
 extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
 
@@ -58,9 +44,6 @@ extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
 #endif /* CONFIG_PM_DEBUG */
 
 /* 24xx */
-extern void omap24xx_idle_loop_suspend(void);
-extern unsigned int omap24xx_idle_loop_suspend_sz;
-
 extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
 					void __iomem *sdrc_power);
 extern unsigned int omap24xx_cpu_suspend_sz;
@@ -110,20 +93,16 @@ extern u16 pm44xx_errata;
 
 #ifdef CONFIG_POWER_AVS_OMAP
 extern int omap_devinit_smartreflex(void);
-extern void omap_enable_smartreflex_on_init(void);
 #else
 static inline int omap_devinit_smartreflex(void)
 {
 	return -EINVAL;
 }
-
-static inline void omap_enable_smartreflex_on_init(void) {}
 #endif
 
 #ifdef CONFIG_TWL4030_CORE
 extern int omap3_twl_init(void);
 extern int omap4_twl_init(void);
-extern int omap3_twl_set_sr_bit(bool enable);
 #else
 static inline int omap3_twl_init(void)
 {
@@ -145,13 +124,9 @@ static inline int omap4_cpcap_init(void)
 #endif
 
 #ifdef CONFIG_PM
-extern void omap_pm_setup_oscillator(u32 tstart, u32 tshut);
 extern void omap_pm_get_oscillator(u32 *tstart, u32 *tshut);
-extern void omap_pm_setup_sr_i2c_pcb_length(u32 mm);
 #else
-static inline void omap_pm_setup_oscillator(u32 tstart, u32 tshut) { }
 static inline void omap_pm_get_oscillator(u32 *tstart, u32 *tshut) { *tstart = *tshut = 0; }
-static inline void omap_pm_setup_sr_i2c_pcb_length(u32 mm) { }
 #endif
 
 #ifdef CONFIG_SUSPEND
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
deleted file mode 100644
index 6953c47d8dc6..000000000000
--- a/arch/arm/mach-omap2/pm24xx.c
+++ /dev/null
@@ -1,312 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * OMAP2 Power Management Routines
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Copyright (C) 2006-2008 Nokia Corporation
- *
- * Written by:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Tony Lindgren
- * Juha Yrjola
- * Amit Kucheria <amit.kucheria@nokia.com>
- * Igor Stoppa <igor.stoppa@nokia.com>
- *
- * Based on pm.c for omap1
- */
-
-#include <linux/cpu_pm.h>
-#include <linux/suspend.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-
-#include <asm/fncpy.h>
-
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-#include <asm/system_misc.h>
-
-#include <linux/omap-dma.h>
-
-#include "soc.h"
-#include "common.h"
-#include "clock.h"
-#include "prm2xxx.h"
-#include "prm-regbits-24xx.h"
-#include "cm2xxx.h"
-#include "cm-regbits-24xx.h"
-#include "sdrc.h"
-#include "sram.h"
-#include "pm.h"
-#include "control.h"
-#include "powerdomain.h"
-#include "clockdomain.h"
-
-static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
-				  void __iomem *sdrc_power);
-
-static struct powerdomain *mpu_pwrdm, *core_pwrdm;
-static struct clockdomain *dsp_clkdm, *mpu_clkdm, *wkup_clkdm, *gfx_clkdm;
-
-static struct clk *osc_ck, *emul_ck;
-
-static int omap2_enter_full_retention(void)
-{
-	u32 l;
-
-	/* There is 1 reference hold for all children of the oscillator
-	 * clock, the following will remove it. If no one else uses the
-	 * oscillator itself it will be disabled if/when we enter retention
-	 * mode.
-	 */
-	clk_disable(osc_ck);
-
-	/* Clear old wake-up events */
-	/* REVISIT: These write to reserved bits? */
-	omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
-	omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
-	omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
-
-	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
-	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
-
-	/* Workaround to kill USB */
-	l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
-	omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
-
-	/* One last check for pending IRQs to avoid extra latency due
-	 * to sleeping unnecessarily. */
-	if (omap_irq_pending())
-		goto no_sleep;
-
-	/* Jump to SRAM suspend code */
-	omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL),
-			   OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
-			   OMAP_SDRC_REGADDR(SDRC_POWER));
-
-no_sleep:
-	clk_enable(osc_ck);
-
-	/* clear CORE wake-up events */
-	omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
-	omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
-
-	/* wakeup domain events - bit 1: GPT1, bit5 GPIO */
-	omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, 0x4 | 0x1);
-
-	/* MPU domain wake events */
-	omap_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET, 0x1);
-
-	omap_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET, 0x20);
-
-	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
-	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON);
-
-	return 0;
-}
-
-static int sti_console_enabled;
-
-static int omap2_allow_mpu_retention(void)
-{
-	if (!omap2xxx_cm_mpu_retention_allowed())
-		return 0;
-	if (sti_console_enabled)
-		return 0;
-
-	return 1;
-}
-
-static void omap2_enter_mpu_retention(void)
-{
-	const int zero = 0;
-
-	/* The peripherals seem not to be able to wake up the MPU when
-	 * it is in retention mode. */
-	if (omap2_allow_mpu_retention()) {
-		/* REVISIT: These write to reserved bits? */
-		omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
-		omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
-		omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
-
-		/* Try to enter MPU retention */
-		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
-
-	} else {
-		/* Block MPU retention */
-		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
-	}
-
-	/* WFI */
-	asm("mcr p15, 0, %0, c7, c0, 4" : : "r" (zero) : "memory", "cc");
-
-	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
-}
-
-static int omap2_can_sleep(void)
-{
-	if (omap2xxx_cm_fclks_active())
-		return 0;
-	if (__clk_is_enabled(osc_ck))
-		return 0;
-
-	return 1;
-}
-
-static void omap2_pm_idle(void)
-{
-	int error;
-
-	if (omap_irq_pending())
-		return;
-
-	error = cpu_cluster_pm_enter();
-	if (error || !omap2_can_sleep()) {
-		omap2_enter_mpu_retention();
-		goto out_cpu_cluster_pm;
-	}
-
-	omap2_enter_full_retention();
-
-out_cpu_cluster_pm:
-	cpu_cluster_pm_exit();
-}
-
-static void __init prcm_setup_regs(void)
-{
-	int i, num_mem_banks;
-	struct powerdomain *pwrdm;
-
-	/*
-	 * Enable autoidle
-	 * XXX This should be handled by hwmod code or PRCM init code
-	 */
-	omap2_prm_write_mod_reg(OMAP24XX_AUTOIDLE_MASK, OCP_MOD,
-			  OMAP2_PRCM_SYSCONFIG_OFFSET);
-
-	/*
-	 * Set CORE powerdomain memory banks to retain their contents
-	 * during RETENTION
-	 */
-	num_mem_banks = pwrdm_get_mem_bank_count(core_pwrdm);
-	for (i = 0; i < num_mem_banks; i++)
-		pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET);
-
-	pwrdm_set_logic_retst(core_pwrdm, PWRDM_POWER_RET);
-
-	pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
-
-	/* Force-power down DSP, GFX powerdomains */
-
-	pwrdm = clkdm_get_pwrdm(dsp_clkdm);
-	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
-
-	pwrdm = clkdm_get_pwrdm(gfx_clkdm);
-	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
-
-	/* Enable hardware-supervised idle for all clkdms */
-	clkdm_for_each(omap_pm_clkdms_setup, NULL);
-	clkdm_add_wkdep(mpu_clkdm, wkup_clkdm);
-
-	omap_common_suspend_init(omap2_enter_full_retention);
-
-	/* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
-	 * stabilisation */
-	omap2_prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
-				OMAP2_PRCM_CLKSSETUP_OFFSET);
-
-	/* Configure automatic voltage transition */
-	omap2_prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
-				OMAP2_PRCM_VOLTSETUP_OFFSET);
-	omap2_prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT_MASK |
-				(0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
-				OMAP24XX_MEMRETCTRL_MASK |
-				(0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
-				(0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
-				OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
-
-	/* Enable wake-up events */
-	omap2_prm_write_mod_reg(OMAP24XX_EN_GPIOS_MASK | OMAP24XX_EN_GPT1_MASK,
-				WKUP_MOD, PM_WKEN);
-
-	/* Enable SYS_CLKEN control when all domains idle */
-	omap2_prm_set_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK, OMAP24XX_GR_MOD,
-				   OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
-}
-
-int __init omap2_pm_init(void)
-{
-	u32 l;
-
-	printk(KERN_INFO "Power Management for OMAP2 initializing\n");
-	l = omap2_prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
-	printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
-
-	/* Look up important powerdomains */
-
-	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
-	if (!mpu_pwrdm)
-		pr_err("PM: mpu_pwrdm not found\n");
-
-	core_pwrdm = pwrdm_lookup("core_pwrdm");
-	if (!core_pwrdm)
-		pr_err("PM: core_pwrdm not found\n");
-
-	/* Look up important clockdomains */
-
-	mpu_clkdm = clkdm_lookup("mpu_clkdm");
-	if (!mpu_clkdm)
-		pr_err("PM: mpu_clkdm not found\n");
-
-	wkup_clkdm = clkdm_lookup("wkup_clkdm");
-	if (!wkup_clkdm)
-		pr_err("PM: wkup_clkdm not found\n");
-
-	dsp_clkdm = clkdm_lookup("dsp_clkdm");
-	if (!dsp_clkdm)
-		pr_err("PM: dsp_clkdm not found\n");
-
-	gfx_clkdm = clkdm_lookup("gfx_clkdm");
-	if (!gfx_clkdm)
-		pr_err("PM: gfx_clkdm not found\n");
-
-
-	osc_ck = clk_get(NULL, "osc_ck");
-	if (IS_ERR(osc_ck)) {
-		printk(KERN_ERR "could not get osc_ck\n");
-		return -ENODEV;
-	}
-
-	if (cpu_is_omap242x()) {
-		emul_ck = clk_get(NULL, "emul_ck");
-		if (IS_ERR(emul_ck)) {
-			printk(KERN_ERR "could not get emul_ck\n");
-			clk_put(osc_ck);
-			return -ENODEV;
-		}
-	}
-
-	prcm_setup_regs();
-
-	/*
-	 * We copy the assembler sleep/wakeup routines to SRAM.
-	 * These routines need to be in SRAM as that's the only
-	 * memory the MPU can see when it wakes up after the entire
-	 * chip enters idle.
-	 */
-	omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
-					    omap24xx_cpu_suspend_sz);
-
-	arm_pm_idle = omap2_pm_idle;
-
-	return 0;
-}
diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
index bf0d25fd2cea..4abb86dc98fd 100644
--- a/arch/arm/mach-omap2/pm33xx-core.c
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -16,7 +16,6 @@
 #include <linux/clk.h>
 #include <linux/cpu.h>
 #include <linux/platform_data/gpio-omap.h>
-#include <linux/pinctrl/pinmux.h>
 #include <linux/wkup_m3_ipc.h>
 #include <linux/of.h>
 #include <linux/rtc.h>
@@ -105,8 +104,6 @@ static int amx3_common_init(int (*idle)(u32 wfi_flags))
 
 static int am33xx_suspend_init(int (*idle)(u32 wfi_flags))
 {
-	int ret;
-
 	gfx_l4ls_clkdm = clkdm_lookup("gfx_l4ls_gfx_clkdm");
 
 	if (!gfx_l4ls_clkdm) {
@@ -114,9 +111,7 @@ static int am33xx_suspend_init(int (*idle)(u32 wfi_flags))
 		return -ENODEV;
 	}
 
-	ret = amx3_common_init(idle);
-
-	return ret;
+	return amx3_common_init(idle);
 }
 
 static int am43xx_suspend_init(int (*idle)(u32 wfi_flags))
@@ -393,12 +388,15 @@ static int __init amx3_idle_init(struct device_node *cpu_node, int cpu)
 		if (!state_node)
 			break;
 
-		if (!of_device_is_available(state_node))
+		if (!of_device_is_available(state_node)) {
+			of_node_put(state_node);
 			continue;
+		}
 
 		if (i == CPUIDLE_STATE_MAX) {
 			pr_warn("%s: cpuidle states reached max possible\n",
 				__func__);
+			of_node_put(state_node);
 			break;
 		}
 
@@ -408,6 +406,7 @@ static int __init amx3_idle_init(struct device_node *cpu_node, int cpu)
 			states[state_count].wfi_flags |= WFI_FLAG_WAKE_M3 |
 							 WFI_FLAG_FLUSH_CACHE;
 
+		of_node_put(state_node);
 		state_count++;
 	}
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index d73c7b692116..68975771e633 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -26,6 +26,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/cpuidle.h>
 
 #include <trace/events/power.h>
 
@@ -174,7 +175,7 @@ static int omap34xx_do_sram_idle(unsigned long save_state)
 	return 0;
 }
 
-void omap_sram_idle(void)
+__cpuidle void omap_sram_idle(bool rcuidle)
 {
 	/* Variable to tell what needs to be saved and restored
 	 * in omap_sram_idle*/
@@ -254,11 +255,18 @@ void omap_sram_idle(void)
 	 */
 	if (save_state)
 		omap34xx_save_context(omap3_arm_context);
+
+	if (rcuidle)
+		ct_cpuidle_enter();
+
 	if (save_state == 1 || save_state == 3)
 		cpu_suspend(save_state, omap34xx_do_sram_idle);
 	else
 		omap34xx_do_sram_idle(save_state);
 
+	if (rcuidle)
+		ct_cpuidle_exit();
+
 	/* Restore normal SDRC POWER settings */
 	if (cpu_is_omap3430() && omap_rev() >= OMAP3430_REV_ES3_0 &&
 	    (omap_type() == OMAP2_DEVICE_TYPE_EMU ||
@@ -294,7 +302,7 @@ static void omap3_pm_idle(void)
 	if (omap_irq_pending())
 		return;
 
-	omap_sram_idle();
+	omap3_do_wfi();
 }
 
 #ifdef CONFIG_SUSPEND
@@ -316,7 +324,7 @@ static int omap3_pm_suspend(void)
 
 	omap3_intc_suspend();
 
-	omap_sram_idle();
+	omap_sram_idle(false);
 
 restore:
 	/* Restore next_pwrsts */
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 5a7a949ae965..37b168119fe4 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -76,7 +76,7 @@ static int omap4_pm_suspend(void)
 	 * domain CSWR is not supported by hardware.
 	 * More details can be found in OMAP4430 TRM section 4.3.4.2.
 	 */
-	omap4_enter_lowpower(cpu_id, cpu_suspend_state);
+	omap4_enter_lowpower(cpu_id, cpu_suspend_state, false);
 
 	/* Restore next powerdomain state */
 	list_for_each_entry(pwrst, &pwrst_list, node) {
@@ -99,7 +99,7 @@ static int omap4_pm_suspend(void)
 		 * possible causes.
 		 * http://www.spinics.net/lists/arm-kernel/msg218641.html
 		 */
-		pr_warn("A possible cause could be an old bootloader - try u-boot >= v2012.07\n");
+		pr_debug("A possible cause could be an old bootloader - try u-boot >= v2012.07\n");
 	} else {
 		pr_info("Successfully put all powerdomains to target state\n");
 	}
@@ -257,7 +257,7 @@ int __init omap4_pm_init(void)
 	 * http://www.spinics.net/lists/arm-kernel/msg218641.html
 	 */
 	if (cpu_is_omap44xx())
-		pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n");
+		pr_debug("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n");
 
 	ret = pwrdm_for_each(pwrdms_setup, NULL);
 	if (ret) {
diff --git a/arch/arm/mach-omap2/pmic-cpcap.c b/arch/arm/mach-omap2/pmic-cpcap.c
index 668dc84fd31e..9f9a20274db8 100644
--- a/arch/arm/mach-omap2/pmic-cpcap.c
+++ b/arch/arm/mach-omap2/pmic-cpcap.c
@@ -18,10 +18,10 @@
 #include "vc.h"
 
 /**
- * omap_cpcap_vsel_to_vdc - convert CPCAP VSEL value to microvolts DC
+ * omap_cpcap_vsel_to_uv - convert CPCAP VSEL value to microvolts DC
  * @vsel: CPCAP VSEL value to convert
  *
- * Returns the microvolts DC that the CPCAP PMIC should generate when
+ * Returns: the microvolts DC that the CPCAP PMIC should generate when
  * programmed with @vsel.
  */
 static unsigned long omap_cpcap_vsel_to_uv(unsigned char vsel)
@@ -35,7 +35,7 @@ static unsigned long omap_cpcap_vsel_to_uv(unsigned char vsel)
  * omap_cpcap_uv_to_vsel - convert microvolts DC to CPCAP VSEL value
  * @uv: microvolts DC to convert
  *
- * Returns the VSEL value necessary for the CPCAP PMIC to
+ * Returns: the VSEL value necessary for the CPCAP PMIC to
  * generate an output voltage equal to or greater than @uv microvolts DC.
  */
 static unsigned char omap_cpcap_uv_to_vsel(unsigned long uv)
@@ -82,10 +82,10 @@ static struct omap_voltdm_pmic omap_cpcap_iva = {
 };
 
 /**
- * omap_max8952_vsel_to_vdc - convert MAX8952 VSEL value to microvolts DC
+ * omap_max8952_vsel_to_uv - convert MAX8952 VSEL value to microvolts DC
  * @vsel: MAX8952 VSEL value to convert
  *
- * Returns the microvolts DC that the MAX8952 Regulator should generate when
+ * Returns: the microvolts DC that the MAX8952 Regulator should generate when
  * programmed with @vsel.
  */
 static unsigned long omap_max8952_vsel_to_uv(unsigned char vsel)
@@ -99,7 +99,7 @@ static unsigned long omap_max8952_vsel_to_uv(unsigned char vsel)
  * omap_max8952_uv_to_vsel - convert microvolts DC to MAX8952 VSEL value
  * @uv: microvolts DC to convert
  *
- * Returns the VSEL value necessary for the MAX8952 Regulator to
+ * Returns: the VSEL value necessary for the MAX8952 Regulator to
  * generate an output voltage equal to or greater than @uv microvolts DC.
  */
 static unsigned char omap_max8952_uv_to_vsel(unsigned long uv)
@@ -129,10 +129,10 @@ static struct omap_voltdm_pmic omap443x_max8952_mpu = {
 };
 
 /**
- * omap_fan5355_vsel_to_vdc - convert FAN535503 VSEL value to microvolts DC
+ * omap_fan535503_vsel_to_uv - convert FAN535503 VSEL value to microvolts DC
  * @vsel: FAN535503 VSEL value to convert
  *
- * Returns the microvolts DC that the FAN535503 Regulator should generate when
+ * Returns: the microvolts DC that the FAN535503 Regulator should generate when
  * programmed with @vsel.
  */
 static unsigned long omap_fan535503_vsel_to_uv(unsigned char vsel)
@@ -144,10 +144,10 @@ static unsigned long omap_fan535503_vsel_to_uv(unsigned char vsel)
 }
 
 /**
- * omap_fan535508_vsel_to_vdc - convert FAN535508 VSEL value to microvolts DC
+ * omap_fan535508_vsel_to_uv - convert FAN535508 VSEL value to microvolts DC
  * @vsel: FAN535508 VSEL value to convert
  *
- * Returns the microvolts DC that the FAN535508 Regulator should generate when
+ * Returns: the microvolts DC that the FAN535508 Regulator should generate when
  * programmed with @vsel.
  */
 static unsigned long omap_fan535508_vsel_to_uv(unsigned char vsel)
@@ -165,7 +165,7 @@ static unsigned long omap_fan535508_vsel_to_uv(unsigned char vsel)
  * omap_fan535503_uv_to_vsel - convert microvolts DC to FAN535503 VSEL value
  * @uv: microvolts DC to convert
  *
- * Returns the VSEL value necessary for the MAX8952 Regulator to
+ * Returns: the VSEL value necessary for the MAX8952 Regulator to
  * generate an output voltage equal to or greater than @uv microvolts DC.
  */
 static unsigned char omap_fan535503_uv_to_vsel(unsigned long uv)
@@ -184,7 +184,7 @@ static unsigned char omap_fan535503_uv_to_vsel(unsigned long uv)
  * omap_fan535508_uv_to_vsel - convert microvolts DC to FAN535508 VSEL value
  * @uv: microvolts DC to convert
  *
- * Returns the VSEL value necessary for the MAX8952 Regulator to
+ * Returns: the VSEL value necessary for the MAX8952 Regulator to
  * generate an output voltage equal to or greater than @uv microvolts DC.
  */
 static unsigned char omap_fan535508_uv_to_vsel(unsigned long uv)
@@ -264,7 +264,11 @@ int __init omap4_cpcap_init(void)
 
 static int __init cpcap_late_init(void)
 {
-	omap4_vc_set_pmic_signaling(PWRDM_POWER_RET);
+	if (!of_find_compatible_node(NULL, NULL, "motorola,cpcap"))
+		return 0;
+
+	if (soc_is_omap443x() || soc_is_omap446x() || soc_is_omap447x())
+		omap4_vc_set_pmic_signaling(PWRDM_POWER_RET);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 2d747f6cffe8..0225b9889404 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -37,8 +37,8 @@
 
 #define PWRDM_TRACE_STATES_FLAG	(1<<31)
 
-void pwrdms_save_context(void);
-void pwrdms_restore_context(void);
+static void pwrdms_save_context(void);
+static void pwrdms_restore_context(void);
 
 enum {
 	PWRDM_STATE_NOW = 0,
@@ -174,7 +174,7 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
 		break;
 	case PWRDM_STATE_PREV:
 		prev = pwrdm_read_prev_pwrst(pwrdm);
-		if (pwrdm->state != prev)
+		if (prev >= 0 && pwrdm->state != prev)
 			pwrdm->state_counter[prev]++;
 		if (prev == PWRDM_POWER_RET)
 			_update_logic_membank_counters(pwrdm);
@@ -187,9 +187,9 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
 			trace_state = (PWRDM_TRACE_STATES_FLAG |
 				       ((next & OMAP_POWERSTATE_MASK) << 8) |
 				       ((prev & OMAP_POWERSTATE_MASK) << 0));
-			trace_power_domain_target_rcuidle(pwrdm->name,
-							  trace_state,
-							  raw_smp_processor_id());
+			trace_power_domain_target(pwrdm->name,
+						  trace_state,
+						  raw_smp_processor_id());
 		}
 		break;
 	default:
@@ -523,7 +523,7 @@ int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm)
  * Set the powerdomain @pwrdm's next power state to @pwrst.  The powerdomain
  * may not enter this state immediately if the preconditions for this state
  * have not been satisfied.  Returns -EINVAL if the powerdomain pointer is
- * null or if the power state is invalid for the powerdomin, or returns 0
+ * null or if the power state is invalid for the powerdomain, or returns 0
  * upon success.
  */
 int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
@@ -541,8 +541,8 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
 
 	if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) {
 		/* Trace the pwrdm desired target state */
-		trace_power_domain_target_rcuidle(pwrdm->name, pwrst,
-						  raw_smp_processor_id());
+		trace_power_domain_target(pwrdm->name, pwrst,
+					  raw_smp_processor_id());
 		/* Program the pwrdm desired target state */
 		ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst);
 	}
@@ -1111,7 +1111,7 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst)
 	int curr_pwrst;
 	int ret = 0;
 
-	if (!pwrdm || IS_ERR(pwrdm))
+	if (IS_ERR_OR_NULL(pwrdm))
 		return -EINVAL;
 
 	while (!(pwrdm->pwrsts & (1 << pwrst))) {
@@ -1149,82 +1149,6 @@ osps_out:
 }
 
 /**
- * pwrdm_get_context_loss_count - get powerdomain's context loss count
- * @pwrdm: struct powerdomain * to wait for
- *
- * Context loss count is the sum of powerdomain off-mode counter, the
- * logic off counter and the per-bank memory off counter.  Returns negative
- * (and WARNs) upon error, otherwise, returns the context loss count.
- */
-int pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
-{
-	int i, count;
-
-	if (!pwrdm) {
-		WARN(1, "powerdomain: %s: pwrdm is null\n", __func__);
-		return -ENODEV;
-	}
-
-	count = pwrdm->state_counter[PWRDM_POWER_OFF];
-	count += pwrdm->ret_logic_off_counter;
-
-	for (i = 0; i < pwrdm->banks; i++)
-		count += pwrdm->ret_mem_off_counter[i];
-
-	/*
-	 * Context loss count has to be a non-negative value. Clear the sign
-	 * bit to get a value range from 0 to INT_MAX.
-	 */
-	count &= INT_MAX;
-
-	pr_debug("powerdomain: %s: context loss count = %d\n",
-		 pwrdm->name, count);
-
-	return count;
-}
-
-/**
- * pwrdm_can_ever_lose_context - can this powerdomain ever lose context?
- * @pwrdm: struct powerdomain *
- *
- * Given a struct powerdomain * @pwrdm, returns 1 if the powerdomain
- * can lose either memory or logic context or if @pwrdm is invalid, or
- * returns 0 otherwise.  This function is not concerned with how the
- * powerdomain registers are programmed (i.e., to go off or not); it's
- * concerned with whether it's ever possible for this powerdomain to
- * go off while some other part of the chip is active.  This function
- * assumes that every powerdomain can go to either ON or INACTIVE.
- */
-bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm)
-{
-	int i;
-
-	if (!pwrdm) {
-		pr_debug("powerdomain: %s: invalid powerdomain pointer\n",
-			 __func__);
-		return true;
-	}
-
-	if (pwrdm->pwrsts & PWRSTS_OFF)
-		return true;
-
-	if (pwrdm->pwrsts & PWRSTS_RET) {
-		if (pwrdm->pwrsts_logic_ret & PWRSTS_OFF)
-			return true;
-
-		for (i = 0; i < pwrdm->banks; i++)
-			if (pwrdm->pwrsts_mem_ret[i] & PWRSTS_OFF)
-				return true;
-	}
-
-	for (i = 0; i < pwrdm->banks; i++)
-		if (pwrdm->pwrsts_mem_on[i] & PWRSTS_OFF)
-			return true;
-
-	return false;
-}
-
-/**
  * pwrdm_save_context - save powerdomain registers
  *
  * Register state is going to be lost due to a suspend or hibernate
@@ -1238,7 +1162,7 @@ static int pwrdm_save_context(struct powerdomain *pwrdm, void *unused)
 }
 
 /**
- * pwrdm_save_context - restore powerdomain registers
+ * pwrdm_restore_context - restore powerdomain registers
  *
  * Restore powerdomain control registers after a suspend or resume
  * event.
@@ -1250,36 +1174,12 @@ static int pwrdm_restore_context(struct powerdomain *pwrdm, void *unused)
 	return 0;
 }
 
-static int pwrdm_lost_power(struct powerdomain *pwrdm, void *unused)
-{
-	int state;
-
-	/*
-	 * Power has been lost across all powerdomains, increment the
-	 * counter.
-	 */
-
-	state = pwrdm_read_pwrst(pwrdm);
-	if (state != PWRDM_POWER_OFF) {
-		pwrdm->state_counter[state]++;
-		pwrdm->state_counter[PWRDM_POWER_OFF]++;
-	}
-	pwrdm->state = state;
-
-	return 0;
-}
-
-void pwrdms_save_context(void)
+static void pwrdms_save_context(void)
 {
 	pwrdm_for_each(pwrdm_save_context, NULL);
 }
 
-void pwrdms_restore_context(void)
+static void pwrdms_restore_context(void)
 {
 	pwrdm_for_each(pwrdm_restore_context, NULL);
 }
-
-void pwrdms_lost_power(void)
-{
-	pwrdm_for_each(pwrdm_lost_power, NULL);
-}
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index 907cc659f47a..fbc89999460b 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -208,8 +208,6 @@ struct powerdomain *pwrdm_lookup(const char *name);
 
 int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
 			void *user);
-int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
-			void *user);
 
 int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
 
@@ -243,8 +241,6 @@ int pwrdm_state_switch_nolock(struct powerdomain *pwrdm);
 int pwrdm_state_switch(struct powerdomain *pwrdm);
 int pwrdm_pre_transition(struct powerdomain *pwrdm);
 int pwrdm_post_transition(struct powerdomain *pwrdm);
-int pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
-bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
 
 extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 state);
 
@@ -273,8 +269,4 @@ extern struct powerdomain gfx_omap2_pwrdm;
 extern void pwrdm_lock(struct powerdomain *pwrdm);
 extern void pwrdm_unlock(struct powerdomain *pwrdm);
 
-extern void pwrdms_save_context(void);
-extern void pwrdms_restore_context(void);
-
-extern void pwrdms_lost_power(void);
 #endif
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 48e804c93caf..5e3544a63526 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -550,7 +550,6 @@ struct omap_prcm_init_data {
 	struct device_node *np;
 };
 
-extern void omap_prcm_irq_cleanup(void);
 extern int omap_prcm_register_chain_handler(
 	struct omap_prcm_irq_setup *irq_setup);
 extern int omap_prcm_event_to_irq(const char *event);
diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c
index 5add541e3b41..7236c50388a8 100644
--- a/arch/arm/mach-omap2/prcm_mpu44xx.c
+++ b/arch/arm/mach-omap2/prcm_mpu44xx.c
@@ -35,18 +35,6 @@ void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 reg)
 	writel_relaxed(val, OMAP44XX_PRCM_MPU_REGADDR(inst, reg));
 }
 
-u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
-{
-	u32 v;
-
-	v = omap4_prcm_mpu_read_inst_reg(inst, reg);
-	v &= ~mask;
-	v |= bits;
-	omap4_prcm_mpu_write_inst_reg(v, inst, reg);
-
-	return v;
-}
-
 /**
  * omap2_set_globals_prcm_mpu - set the MPU PRCM base address (for early use)
  * @prcm_mpu: PRCM_MPU base virtual address
diff --git a/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h b/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h
index 7c6377566f33..0c519447e790 100644
--- a/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h
+++ b/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h
@@ -26,8 +26,6 @@ extern struct omap_domain_base prcm_mpu_base;
 
 extern u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 idx);
 extern void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 idx);
-extern u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst,
-					    s16 idx);
 extern void __init omap2_set_globals_prcm_mpu(void __iomem *prcm_mpu);
 #endif
 
diff --git a/arch/arm/mach-omap2/prm-regbits-33xx.h b/arch/arm/mach-omap2/prm-regbits-33xx.h
index 3748c5266ae1..9b97f8c76cd1 100644
--- a/arch/arm/mach-omap2/prm-regbits-33xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-33xx.h
@@ -15,6 +15,7 @@
 #define AM33XX_GFX_MEM_STATEST_MASK			(0x3 << 4)
 #define AM33XX_GLOBAL_WARM_SW_RST_MASK			(1 << 1)
 #define AM33XX_RST_GLOBAL_WARM_SW_MASK			(1 << 0)
+#define AM33XX_RST_GLOBAL_COLD_SW_MASK			(1 << 1)
 #define AM33XX_PRUSS_MEM_ONSTATE_MASK			(0x3 << 5)
 #define AM33XX_PRUSS_MEM_RETSTATE_MASK			(1 << 7)
 #define AM33XX_PRUSS_MEM_STATEST_MASK			(0x3 << 23)
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 08df78810a5e..fc53a27eed01 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -15,9 +15,8 @@
 # ifndef __ASSEMBLER__
 extern struct omap_domain_base prm_base;
 extern u16 prm_features;
-extern void omap2_set_globals_prm(void __iomem *prm);
+extern enum reboot_mode prm_reboot_mode;
 int omap_prcm_init(void);
-int omap2_prm_base_init(void);
 int omap2_prcm_base_init(void);
 # endif
 
@@ -156,12 +155,10 @@ int omap_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset);
 int omap_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 prm_mod,
 				u16 offset, u16 st_offset);
 int omap_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset);
-extern u32 prm_read_reset_sources(void);
 extern bool prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx);
 extern void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx);
 void omap_prm_reset_system(void);
 
-void omap_prm_reconfigure_io_chain(void);
 int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
 
 /*
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index 3d803f7182b9..bc263d564acc 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -104,9 +104,6 @@ int omap2_prm_deassert_hardreset(u8 rst_shift, u8 st_shift, u8 part,
 				 s16 prm_mod, u16 reset_offset,
 				 u16 st_offset);
 
-extern int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
-extern int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
-extern int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm);
 extern int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
 				    u8 pwrst);
 extern int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index 4b65a0f9cf7d..505d685d6792 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -10,15 +10,12 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/reboot.h>
 
 #include "powerdomain.h"
 #include "prm33xx.h"
 #include "prm-regbits-33xx.h"
 
-#define AM33XX_PRM_RSTCTRL_OFFSET		0x0000
-
-#define AM33XX_RST_GLOBAL_WARM_SW_MASK		(1 << 0)
-
 /* Read a register in a PRM instance */
 static u32 am33xx_prm_read_reg(s16 inst, u16 idx)
 {
@@ -322,10 +319,19 @@ static int am33xx_check_vcvp(void)
  *
  * Immediately reboots the device through warm reset.
  */
-static void am33xx_prm_global_warm_sw_reset(void)
+static void am33xx_prm_global_sw_reset(void)
 {
-	am33xx_prm_rmw_reg_bits(AM33XX_RST_GLOBAL_WARM_SW_MASK,
-				AM33XX_RST_GLOBAL_WARM_SW_MASK,
+	/*
+	 * Historically AM33xx performed warm reset for all requested reboot_mode.
+	 * Keep this behaviour unchanged for all except newly added REBOOT_COLD.
+	 */
+	u32 mask = AM33XX_RST_GLOBAL_WARM_SW_MASK;
+
+	if (prm_reboot_mode == REBOOT_COLD)
+		mask = AM33XX_RST_GLOBAL_COLD_SW_MASK;
+
+	am33xx_prm_rmw_reg_bits(mask,
+				mask,
 				AM33XX_PRM_DEVICE_MOD,
 				AM33XX_PRM_RSTCTRL_OFFSET);
 
@@ -386,7 +392,7 @@ static struct prm_ll_data am33xx_prm_ll_data = {
 	.assert_hardreset		= am33xx_prm_assert_hardreset,
 	.deassert_hardreset		= am33xx_prm_deassert_hardreset,
 	.is_hardreset_asserted		= am33xx_prm_is_hardreset_asserted,
-	.reset_system			= am33xx_prm_global_warm_sw_reset,
+	.reset_system			= am33xx_prm_global_sw_reset,
 };
 
 int __init am33xx_prm_init(const struct omap_prcm_init_data *data)
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 63e73e9b82bc..1b5d08f594aa 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -32,6 +32,7 @@ static void omap3xxx_prm_read_pending_irqs(unsigned long *events);
 static void omap3xxx_prm_ocp_barrier(void);
 static void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
 static void omap3xxx_prm_restore_irqen(u32 *saved_mask);
+static void omap3xxx_prm_iva_idle(void);
 
 static const struct omap_prcm_irq omap3_prcm_irqs[] = {
 	OMAP_PRCM_IRQ("wkup",	0,	0),
@@ -268,7 +269,7 @@ static int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
  * Toggles the reset signal to modem IP block. Required to allow
  * OMAP3430 without stacked modem to idle properly.
  */
-void __init omap3_prm_reset_modem(void)
+static void __init omap3_prm_reset_modem(void)
 {
 	omap2_prm_write_mod_reg(
 		OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
@@ -469,7 +470,7 @@ static u32 omap3xxx_prm_read_reset_sources(void)
  * function forces the IVA2 into idle state so it can go
  * into retention/off and thus allow full-chip retention/off.
  */
-void omap3xxx_prm_iva_idle(void)
+static void omap3xxx_prm_iva_idle(void)
 {
 	/* ensure IVA2 clock is disabled */
 	omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index ed7c389aa5a7..ab899e461c62 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -138,8 +138,6 @@ extern void omap3_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
 int __init omap3xxx_prm_init(const struct omap_prcm_init_data *data);
-void omap3xxx_prm_iva_idle(void);
-void omap3_prm_reset_modem(void);
 int omap3xxx_prm_clear_global_cold_reset(void);
 void omap3_prm_save_scratchpad_contents(u32 *ptr);
 void omap3_prm_init_pm(bool has_uart4, bool has_iva);
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 25093c1e5b9a..6c555438dd48 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -407,7 +407,7 @@ static bool omap44xx_prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx)
 }
 
 /**
- * omap44xx_prm_clear_context_lost_flags_old - clear context loss flags
+ * omap44xx_prm_clear_context_loss_flags_old - clear context loss flags
  * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION)
  * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST)
  * @idx: CONTEXT register offset
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index fb2d48cfe756..ee4588acda50 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -67,6 +67,12 @@ struct omap_domain_base prm_base;
 u16 prm_features;
 
 /*
+ * Platforms that implement different reboot modes can store the requested
+ * mode here.
+ */
+enum reboot_mode prm_reboot_mode;
+
+/*
  * prm_ll_data: function pointers to SoC-specific implementations of
  * common PRM functions
  */
@@ -187,7 +193,7 @@ int omap_prcm_event_to_irq(const char *name)
  *
  * No return value.
  */
-void omap_prcm_irq_cleanup(void)
+static void omap_prcm_irq_cleanup(void)
 {
 	unsigned int irq;
 	int i;
@@ -345,41 +351,6 @@ err:
 }
 
 /**
- * omap2_set_globals_prm - set the PRM base address (for early use)
- * @prm: PRM base virtual address
- *
- * XXX Will be replaced when the PRM/CM drivers are completed.
- */
-void __init omap2_set_globals_prm(void __iomem *prm)
-{
-	prm_base.va = prm;
-}
-
-/**
- * prm_read_reset_sources - return the sources of the SoC's last reset
- *
- * Return a u32 bitmask representing the reset sources that caused the
- * SoC to reset.  The low-level per-SoC functions called by this
- * function remap the SoC-specific reset source bits into an
- * OMAP-common set of reset source bits, defined in
- * arch/arm/mach-omap2/prm.h.  Returns the standardized reset source
- * u32 bitmask from the hardware upon success, or returns (1 <<
- * OMAP_UNKNOWN_RST_SRC_ID_SHIFT) if no low-level read_reset_sources()
- * function was registered.
- */
-u32 prm_read_reset_sources(void)
-{
-	u32 ret = 1 << OMAP_UNKNOWN_RST_SRC_ID_SHIFT;
-
-	if (prm_ll_data->read_reset_sources)
-		ret = prm_ll_data->read_reset_sources();
-	else
-		WARN_ONCE(1, "prm: %s: no mapping function defined for reset sources\n", __func__);
-
-	return ret;
-}
-
-/**
  * prm_was_any_context_lost_old - was device context lost? (old API)
  * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION)
  * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST)
@@ -405,7 +376,7 @@ bool prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx)
 }
 
 /**
- * prm_clear_context_lost_flags_old - clear context loss flags (old API)
+ * prm_clear_context_loss_flags_old - clear context loss flags (old API)
  * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION)
  * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST)
  * @idx: CONTEXT register offset
@@ -489,22 +460,6 @@ int omap_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset)
 }
 
 /**
- * omap_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
- *
- * Clear any previously-latched I/O wakeup events and ensure that the
- * I/O wakeup gates are aligned with the current mux settings.
- * Calls SoC specific I/O chain reconfigure function if available,
- * otherwise does nothing.
- */
-void omap_prm_reconfigure_io_chain(void)
-{
-	if (!prcm_irq_setup || !prcm_irq_setup->reconfigure_io_chain)
-		return;
-
-	prcm_irq_setup->reconfigure_io_chain();
-}
-
-/**
  * omap_prm_reset_system - trigger global SW reset
  *
  * Triggers SoC specific global warm reset to reboot the device.
@@ -548,6 +503,7 @@ int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
 
 /**
  * omap_prm_vp_check_txdone - check voltage processor TX done status
+ * @vp_id: unique VP instance ID
  *
  * Checks if voltage processor transmission has been completed.
  * Returns non-zero if a transmission has completed, 0 otherwise.
@@ -565,6 +521,7 @@ u32 omap_prm_vp_check_txdone(u8 vp_id)
 
 /**
  * omap_prm_vp_clear_txdone - clears voltage processor TX done status
+ * @vp_id: unique VP instance ID
  *
  * Clears the status bit for completed voltage processor transmission
  * returned by prm_vp_check_txdone.
@@ -740,7 +697,7 @@ static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
  * on the DT data. Returns 0 in success, negative error value
  * otherwise.
  */
-int __init omap2_prm_base_init(void)
+static int __init omap2_prm_base_init(void)
 {
 	struct device_node *np;
 	const struct of_device_id *match;
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 2be4106d0dd6..b1bf9e24d442 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -45,7 +45,7 @@ static struct omap2_sms_regs sms_context;
  *
  * Save SMS registers that need to be restored after off mode.
  */
-void omap2_sms_save_context(void)
+static void omap2_sms_save_context(void)
 {
 	sms_context.sms_sysconfig = sms_read_reg(SMS_SYSCONFIG);
 }
@@ -60,55 +60,6 @@ void omap2_sms_restore_context(void)
 	sms_write_reg(sms_context.sms_sysconfig, SMS_SYSCONFIG);
 }
 
-/**
- * omap2_sdrc_get_params - return SDRC register values for a given clock rate
- * @r: SDRC clock rate (in Hz)
- * @sdrc_cs0: chip select 0 ram timings **
- * @sdrc_cs1: chip select 1 ram timings **
- *
- * Return pre-calculated values for the SDRC_ACTIM_CTRLA,
- *  SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL and SDRC_MR registers in sdrc_cs[01]
- *  structs,for a given SDRC clock rate 'r'.
- * These parameters control various timing delays in the SDRAM controller
- *  that are expressed in terms of the number of SDRC clock cycles to
- *  wait; hence the clock rate dependency.
- *
- * Supports 2 different timing parameters for both chip selects.
- *
- * Note 1: the sdrc_init_params_cs[01] must be sorted rate descending.
- * Note 2: If sdrc_init_params_cs_1 is not NULL it must be of same size
- *  as sdrc_init_params_cs_0.
- *
- * Fills in the struct omap_sdrc_params * for each chip select.
- * Returns 0 upon success or -1 upon failure.
- */
-int omap2_sdrc_get_params(unsigned long r,
-			  struct omap_sdrc_params **sdrc_cs0,
-			  struct omap_sdrc_params **sdrc_cs1)
-{
-	struct omap_sdrc_params *sp0, *sp1;
-
-	if (!sdrc_init_params_cs0)
-		return -1;
-
-	sp0 = sdrc_init_params_cs0;
-	sp1 = sdrc_init_params_cs1;
-
-	while (sp0->rate && sp0->rate != r) {
-		sp0++;
-		if (sdrc_init_params_cs1)
-			sp1++;
-	}
-
-	if (!sp0->rate)
-		return -1;
-
-	*sdrc_cs0 = sp0;
-	*sdrc_cs1 = sp1;
-	return 0;
-}
-
-
 void __init omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms)
 {
 	omap2_sdrc_base = sdrc;
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 5bdb832665c0..45b35422b587 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -80,10 +80,6 @@ static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 					  struct omap_sdrc_params *sdrc_cs1) {};
 #endif
 
-int omap2_sdrc_get_params(unsigned long r,
-			  struct omap_sdrc_params **sdrc_cs0,
-			  struct omap_sdrc_params **sdrc_cs1);
-void omap2_sms_save_context(void);
 void omap2_sms_restore_context(void);
 
 struct memory_timings {
@@ -95,7 +91,6 @@ struct memory_timings {
 };
 
 extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
-struct omap_sdrc_params *rx51_get_sdram_timings(void);
 
 u32 omap2xxx_sdrc_dll_is_unlocked(void);
 u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 529d46cfdea2..5a275b4fd404 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * linux/arch/arm/mach-omap2/sdrc2xxx.c
- *
  * SDRAM timing related functions for OMAP2xxx
  *
  * Copyright (C) 2005, 2008 Texas Instruments Inc.
diff --git a/arch/arm/mach-omap2/serial.h b/arch/arm/mach-omap2/serial.h
deleted file mode 100644
index 7ca1fcff453b..000000000000
--- a/arch/arm/mach-omap2/serial.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* OMAP2 serial ports */
-#define OMAP2_UART1_BASE	0x4806a000
-#define OMAP2_UART2_BASE	0x4806c000
-#define OMAP2_UART3_BASE	0x4806e000
-
-/* OMAP3 serial ports */
-#define OMAP3_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP3_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP3_UART3_BASE	0x49020000
-#define OMAP3_UART4_BASE	0x49042000	/* Only on 36xx */
-#define OMAP3_UART4_AM35XX_BASE	0x4809E000	/* Only on AM35xx */
-
-/* OMAP4 serial ports */
-#define OMAP4_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP4_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP4_UART3_BASE	0x48020000
-#define OMAP4_UART4_BASE	0x4806e000
-
-/* TI81XX serial ports */
-#define TI81XX_UART1_BASE	0x48020000
-#define TI81XX_UART2_BASE	0x48022000
-#define TI81XX_UART3_BASE	0x48024000
-
-/* AM3505/3517 UART4 */
-#define AM35XX_UART4_BASE	0x4809E000	/* Only on AM3505/3517 */
-
-/* AM33XX serial port */
-#define AM33XX_UART1_BASE	0x44E09000
-
-/* OMAP5 serial ports */
-#define OMAP5_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP5_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP5_UART3_BASE	OMAP4_UART3_BASE
-#define OMAP5_UART4_BASE	OMAP4_UART4_BASE
-#define OMAP5_UART5_BASE	0x48066000
-#define OMAP5_UART6_BASE	0x48068000
-
-/* External port on Zoom2/3 */
-#define ZOOM_UART_BASE		0x10000000
-#define ZOOM_UART_VIRT		0xfa400000
-
-#define OMAP_PORT_SHIFT		2
-#define ZOOM_PORT_SHIFT		1
-
-#define OMAP24XX_BASE_BAUD	(48000000/16)
-
-#ifndef __ASSEMBLER__
-
-struct omap_board_data;
-struct omap_uart_port_info;
-
-extern void omap_serial_init(void);
-extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
-extern void omap_serial_init_port(struct omap_board_data *bdata,
-		struct omap_uart_port_info *platform_data);
-#endif
diff --git a/arch/arm/mach-omap2/sleep33xx.S b/arch/arm/mach-omap2/sleep33xx.S
index ac3d0b363c51..3bfd8b5e03ed 100644
--- a/arch/arm/mach-omap2/sleep33xx.S
+++ b/arch/arm/mach-omap2/sleep33xx.S
@@ -10,7 +10,7 @@
 #include <linux/platform_data/pm33xx.h>
 #include <linux/ti-emif-sram.h>
 #include <asm/assembler.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 
 #include "iomap.h"
 #include "cm33xx.h"
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index c4e97d35c310..781a131b40a6 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -465,7 +465,7 @@ l2_inv_gp:
 	mov	r12, #0x2
 	smc	#0			@ Call SMI monitor (smieq)
 logic_l1_restore:
-	adr	r0, l2dis_3630_offset	@ adress for offset
+	adr	r0, l2dis_3630_offset	@ address for offset
 	ldr	r1, [r0]		@ value for offset
 	ldr	r1, [r0, r1]		@ value at l2dis_3630
 	cmp	r1, #0x1		@ Test if L2 re-enable needed on 3630
diff --git a/arch/arm/mach-omap2/sleep43xx.S b/arch/arm/mach-omap2/sleep43xx.S
index 832c91327945..ec0972a48f08 100644
--- a/arch/arm/mach-omap2/sleep43xx.S
+++ b/arch/arm/mach-omap2/sleep43xx.S
@@ -11,7 +11,7 @@
 #include <linux/platform_data/pm33xx.h>
 #include <asm/assembler.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 
 #include "cm33xx.h"
 #include "common.h"
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index f60f6a9aed73..f09c9197808b 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -9,7 +9,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/smp_scu.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include "omap-secure.h"
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index db672cf19a51..d2133423b0c9 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -26,8 +26,6 @@
 #include "control.h"
 #include "pm.h"
 
-static bool sr_enable_on_init;
-
 /* Read EFUSE values from control registers for OMAP3430 */
 static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 				struct omap_sr_data *sr_data)
@@ -144,8 +142,6 @@ static int __init sr_init_by_name(const char *name, const char *voltdm)
 
 	sr_set_nvalues(volt_data, sr_data);
 
-	sr_data->enable_on_init = sr_enable_on_init;
-
 exit:
 	i++;
 
@@ -173,15 +169,6 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 }
 #endif
 
-/*
- * API to be called from board files to enable smartreflex
- * autocompensation at init.
- */
-void __init omap_enable_smartreflex_on_init(void)
-{
-	sr_enable_on_init = true;
-}
-
 static const char * const omap4_sr_instances[] = {
 	"mpu",
 	"iva",
diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c
index 39cf270da718..898b011ae8d9 100644
--- a/arch/arm/mach-omap2/sram.c
+++ b/arch/arm/mach-omap2/sram.c
@@ -14,11 +14,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/set_memory.h>
 
 #include <asm/fncpy.h>
 #include <asm/tlb.h>
 #include <asm/cacheflush.h>
-#include <asm/set_memory.h>
 
 #include <asm/mach/map.h>
 
@@ -45,7 +45,7 @@
 
 #define GP_DEVICE		0x300
 
-#define ROUND_DOWN(value,boundary)	((value) & (~((boundary)-1)))
+#define ROUND_DOWN(value, boundary)	((value) & (~((boundary) - 1)))
 
 static unsigned long omap_sram_start;
 static unsigned long omap_sram_size;
@@ -96,8 +96,7 @@ void *omap_sram_push(void *funcp, unsigned long size)
 
 	dst = fncpy(sram, funcp, size);
 
-	set_memory_ro(base, pages);
-	set_memory_x(base, pages);
+	set_memory_rox(base, pages);
 
 	return dst;
 }
@@ -119,7 +118,7 @@ static void omap_sram_reset(void)
  */
 static int is_sram_locked(void)
 {
-	if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
+	if (omap_type() == OMAP2_DEVICE_TYPE_GP) {
 		/* RAMFW: R/W access to all initiators for all qualifier sets */
 		if (cpu_is_omap242x()) {
 			writel_relaxed(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
@@ -217,8 +216,7 @@ static void __init omap2_map_sram(void)
 	base = (unsigned long)omap_sram_base;
 	pages = PAGE_ALIGN(omap_sram_size) / PAGE_SIZE;
 
-	set_memory_ro(base, pages);
-	set_memory_x(base, pages);
+	set_memory_rox(base, pages);
 }
 
 static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h
index 271062f23482..030cabc39821 100644
--- a/arch/arm/mach-omap2/sram.h
+++ b/arch/arm/mach-omap2/sram.h
@@ -17,10 +17,6 @@ extern int __init omap_sram_init(void);
 
 extern void *omap_sram_push(void *funcp, unsigned long size);
 
-/* Do not use these */
-extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap24xx_sram_reprogram_clock_sz;
-
 extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
 						u32 base_cs, u32 force_unlock);
 extern unsigned long omap242x_sram_ddr_init_sz;
diff --git a/arch/arm/mach-omap2/ti81xx-restart.c b/arch/arm/mach-omap2/ti81xx-restart.c
index d6dc518b1dde..5b5fb37caa50 100644
--- a/arch/arm/mach-omap2/ti81xx-restart.c
+++ b/arch/arm/mach-omap2/ti81xx-restart.c
@@ -26,5 +26,6 @@ void ti81xx_restart(enum reboot_mode mode, const char *cmd)
 {
 	omap2_prm_set_mod_reg_bits(TI81XX_GLOBAL_RST_COLD, 0,
 				   TI81XX_PRM_DEVICE_RSTCTRL);
-	while (1);
+	while (1)
+		;
 }
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 620ba69c8f11..5677c4a08f37 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -76,6 +76,7 @@ static void __init realtime_counter_init(void)
 	}
 
 	rate = clk_get_rate(sys_clk);
+	clk_put(sys_clk);
 
 	if (soc_is_dra7xx()) {
 		/*
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index a0c4c42e56b9..b46c254c2bc4 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -11,12 +11,12 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
 #include <linux/export.h>
 #include <linux/platform_data/usb-omap.h>
 
 #include <linux/usb/musb.h>
 
+#include "usb-tusb6010.h"
 #include "gpmc.h"
 
 static u8		async_cs, sync_cs;
@@ -97,7 +97,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps)
 }
 
 /* tusb driver calls this when it changes the chip's clocking */
-int tusb6010_platform_retime(unsigned is_refclk)
+static int tusb6010_platform_retime(unsigned is_refclk)
 {
 	static const char	error[] =
 		KERN_ERR "tusb6010 %s retime error %d\n";
@@ -121,7 +121,6 @@ int tusb6010_platform_retime(unsigned is_refclk)
 done:
 	return status;
 }
-EXPORT_SYMBOL_GPL(tusb6010_platform_retime);
 
 static struct resource tusb_resources[] = {
 	/* Order is significant!  The start/end fields
@@ -133,10 +132,6 @@ static struct resource tusb_resources[] = {
 	{ /* Synchronous access */
 		.flags	= IORESOURCE_MEM,
 	},
-	{ /* IRQ */
-		.name	= "mc",
-		.flags	= IORESOURCE_IRQ,
-	},
 };
 
 static u64 tusb_dmamask = ~(u32)0;
@@ -154,11 +149,10 @@ static struct platform_device tusb_device = {
 
 
 /* this may be called only from board-*.c setup code */
-int __init
-tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
-		unsigned ps_refclk, unsigned waitpin,
-		unsigned async, unsigned sync,
-		unsigned irq, unsigned dmachan)
+int __init tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
+		unsigned int ps_refclk, unsigned int waitpin,
+		unsigned int async, unsigned int sync,
+		unsigned int dmachan)
 {
 	int		status;
 	static char	error[] __initdata =
@@ -194,14 +188,6 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
 	if (status < 0)
 		return status;
 
-	/* IRQ */
-	status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq");
-	if (status < 0) {
-		printk(error, 3, status);
-		return status;
-	}
-	tusb_resources[2].start = gpio_to_irq(irq);
-
 	/* set up memory timings ... can speed them up later */
 	if (!ps_refclk) {
 		printk(error, 4, status);
diff --git a/arch/arm/mach-omap2/usb-tusb6010.h b/arch/arm/mach-omap2/usb-tusb6010.h
new file mode 100644
index 000000000000..d210ff6238c2
--- /dev/null
+++ b/arch/arm/mach-omap2/usb-tusb6010.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __USB_TUSB6010_H
+#define __USB_TUSB6010_H
+
+extern int __init tusb6010_setup_interface(
+		struct musb_hdrc_platform_data *data,
+		unsigned int ps_refclk, unsigned int waitpin,
+		unsigned int async_cs, unsigned int sync_cs,
+		unsigned int dmachan);
+
+#endif /* __USB_TUSB6010_H */
diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
deleted file mode 100644
index 740a499befce..000000000000
--- a/arch/arm/mach-omap2/usb.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <linux/platform_data/usb-omap.h>
-
-/* AM35x */
-/* USB 2.0 PHY Control */
-#define CONF2_PHY_GPIOMODE	(1 << 23)
-#define CONF2_OTGMODE		(3 << 14)
-#define CONF2_NO_OVERRIDE	(0 << 14)
-#define CONF2_FORCE_HOST	(1 << 14)
-#define CONF2_FORCE_DEVICE	(2 << 14)
-#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
-#define CONF2_SESENDEN		(1 << 13)
-#define CONF2_VBDTCTEN		(1 << 12)
-#define CONF2_REFFREQ_24MHZ	(2 << 8)
-#define CONF2_REFFREQ_26MHZ	(7 << 8)
-#define CONF2_REFFREQ_13MHZ	(6 << 8)
-#define CONF2_REFFREQ		(0xf << 8)
-#define CONF2_PHYCLKGD		(1 << 7)
-#define CONF2_VBUSSENSE		(1 << 6)
-#define CONF2_PHY_PLLON		(1 << 5)
-#define CONF2_RESET		(1 << 4)
-#define CONF2_PHYPWRDN		(1 << 3)
-#define CONF2_OTGPWRDN		(1 << 2)
-#define CONF2_DATPOL		(1 << 1)
-
-/* TI81XX specific definitions */
-#define USBCTRL0	0x620
-#define USBSTAT0	0x624
-
-/* TI816X PHY controls bits */
-#define TI816X_USBPHY0_NORMAL_MODE	(1 << 0)
-#define TI816X_USBPHY_REFCLK_OSC	(1 << 8)
-
-/* TI814X PHY controls bits */
-#define USBPHY_CM_PWRDN		(1 << 0)
-#define USBPHY_OTG_PWRDN	(1 << 1)
-#define USBPHY_CHGDET_DIS	(1 << 2)
-#define USBPHY_CHGDET_RSTRT	(1 << 3)
-#define USBPHY_SRCONDM		(1 << 4)
-#define USBPHY_SINKONDP		(1 << 5)
-#define USBPHY_CHGISINK_EN	(1 << 6)
-#define USBPHY_CHGVSRC_EN	(1 << 7)
-#define USBPHY_DMPULLUP		(1 << 8)
-#define USBPHY_DPPULLUP		(1 << 9)
-#define USBPHY_CDET_EXTCTL	(1 << 10)
-#define USBPHY_GPIO_MODE	(1 << 12)
-#define USBPHY_DPOPBUFCTL	(1 << 13)
-#define USBPHY_DMOPBUFCTL	(1 << 14)
-#define USBPHY_DPINPUT		(1 << 15)
-#define USBPHY_DMINPUT		(1 << 16)
-#define USBPHY_DPGPIO_PD	(1 << 17)
-#define USBPHY_DMGPIO_PD	(1 << 18)
-#define USBPHY_OTGVDET_EN	(1 << 19)
-#define USBPHY_OTGSESSEND_EN	(1 << 20)
-#define USBPHY_DATA_POLARITY	(1 << 23)
-
-struct usbhs_phy_data {
-	int port;		/* 1 indexed port number */
-	int reset_gpio;
-	int vcc_gpio;
-	bool vcc_polarity;	/* 1 active high, 0 active low */
-};
-
-extern void usb_musb_init(struct omap_musb_board_data *board_data);
-extern void usbhs_init(struct usbhs_omap_platform_data *pdata);
-extern int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys);
-
-extern void am35x_musb_reset(void);
-extern void am35x_musb_phy_power(u8 on);
-extern void am35x_musb_clear_irq(void);
-extern void am35x_set_mode(u8 musb_mode);
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index ea02d40405c4..fc26b96a20cc 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -802,21 +802,6 @@ static u8 omap_vc_calc_vsel(struct voltagedomain *voltdm, u32 uvolt)
 	return voltdm->pmic->uv_to_vsel(uvolt);
 }
 
-#ifdef CONFIG_PM
-/**
- * omap_pm_setup_sr_i2c_pcb_length - set length of SR I2C traces on PCB
- * @mm: length of the PCB trace in millimetres
- *
- * Sets the PCB trace length for the I2C channel. By default uses 63mm.
- * This is needed for properly calculating the capacitance value for
- * the PCB trace, and for setting the SR I2C channel timing parameters.
- */
-void __init omap_pm_setup_sr_i2c_pcb_length(u32 mm)
-{
-	sr_i2c_pcb_length = mm;
-}
-#endif
-
 void __init omap_vc_init_channel(struct voltagedomain *voltdm)
 {
 	struct omap_vc_channel *vc = voltdm->vc;
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 0a0c771dbb0a..000c2bca5ef0 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -51,7 +51,7 @@ static LIST_HEAD(voltdm_list);
  */
 unsigned long voltdm_get_voltage(struct voltagedomain *voltdm)
 {
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return 0;
 	}
@@ -67,13 +67,13 @@ unsigned long voltdm_get_voltage(struct voltagedomain *voltdm)
  * This API should be called by the kernel to do the voltage scaling
  * for a particular voltage domain during DVFS.
  */
-int voltdm_scale(struct voltagedomain *voltdm,
+static int voltdm_scale(struct voltagedomain *voltdm,
 		 unsigned long target_volt)
 {
 	int ret, i;
 	unsigned long volt = 0;
 
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return -EINVAL;
 	}
@@ -124,7 +124,7 @@ void voltdm_reset(struct voltagedomain *voltdm)
 {
 	unsigned long target_volt;
 
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
@@ -154,7 +154,7 @@ void voltdm_reset(struct voltagedomain *voltdm)
 void omap_voltage_get_volttable(struct voltagedomain *voltdm,
 				struct omap_volt_data **volt_data)
 {
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
@@ -182,7 +182,7 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
 {
 	int i;
 
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return ERR_PTR(-EINVAL);
 	}
@@ -216,7 +216,7 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
 int omap_voltage_register_pmic(struct voltagedomain *voltdm,
 			       struct omap_voltdm_pmic *pmic)
 {
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return -EINVAL;
 	}
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index 4a225f9559a5..e610f63a020d 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -163,8 +163,6 @@ extern void omap54xx_voltagedomains_init(void);
 
 struct voltagedomain *voltdm_lookup(const char *name);
 void voltdm_init(struct voltagedomain **voltdm_list);
-int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm);
-int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
 void voltdm_reset(struct voltagedomain *voltdm);
 unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
 #endif
diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c
index a709655b978c..03c481c4742c 100644
--- a/arch/arm/mach-omap2/vp.c
+++ b/arch/arm/mach-omap2/vp.c
@@ -199,7 +199,7 @@ void omap_vp_enable(struct voltagedomain *voltdm)
 	struct omap_vp_instance *vp;
 	u32 vpconfig, volt;
 
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
@@ -244,7 +244,7 @@ void omap_vp_disable(struct voltagedomain *voltdm)
 	u32 vpconfig;
 	int timeout;
 
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c
index d4ea56a5f75a..898e7e332981 100644
--- a/arch/arm/mach-omap2/wd_timer.c
+++ b/arch/arm/mach-omap2/wd_timer.c
@@ -57,7 +57,7 @@ int omap2_wd_timer_disable(struct omap_hwmod *oh)
 }
 
 /**
- * omap2_wdtimer_reset - reset and disable the WDTIMER IP block
+ * omap2_wd_timer_reset - reset and disable the WDTIMER IP block
  * @oh: struct omap_hwmod *
  *
  * After the WDTIMER IP blocks are reset on OMAP2/3, we must also take
@@ -71,6 +71,8 @@ int omap2_wd_timer_disable(struct omap_hwmod *oh)
  * during a normal merge window.  omap_hwmod_softreset() should be
  * renamed to omap_hwmod_set_ocp_softreset(), and omap_hwmod_softreset()
  * should call the hwmod _ocp_softreset() code.
+ *
+ * Returns: %0 on success or -errno value on error.
  */
 int omap2_wd_timer_reset(struct omap_hwmod *oh)
 {
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 0044b2823710..ee449ca032d2 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -28,22 +28,6 @@ config ARCH_ORION5X_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion5x using flattened device tree.
 
-config MACH_DB88F5281
-	bool "Marvell Orion-2 Development Board"
-	select I2C_BOARDINFO if I2C
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-2 (88F5281) Development Board
-
-config MACH_RD88F5182
-	bool "Marvell Orion-NAS Reference Design"
-	select I2C_BOARDINFO if I2C
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-NAS (88F5182) RD2
-
 config MACH_RD88F5182_DT
 	bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)"
 	select ARCH_ORION5X_DT
@@ -98,14 +82,6 @@ config MACH_LINKSTATION_MINI
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo Linkstation Mini (LS-WSGL) platform.
 
-config MACH_LINKSTATION_LS_HGL
-	bool "Buffalo Linkstation LS-HGL"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select I2C_BOARDINFO if I2C
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Buffalo Linkstation LS-HGL platform.
-
 config MACH_TS409
 	bool "QNAP TS-409"
 	depends on ATAGS
@@ -113,13 +89,6 @@ config MACH_TS409
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-409 platform.
 
-config MACH_WRT350N_V2
-	bool "Linksys WRT350N v2"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Linksys WRT350N v2 platform.
-
 config MACH_TS78XX
 	bool "Technologic Systems TS-78xx"
 	depends on ATAGS
@@ -156,32 +125,4 @@ config MACH_MSS2_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Maxtor Shared Storage II platform.
 
-config MACH_WNR854T
-	bool "Netgear WNR854T"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Netgear WNR854T platform.
-
-config MACH_RD88F5181L_GE
-	bool "Marvell Orion-VoIP GE Reference Design"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-VoIP GE (88F5181L) RD.
-
-config MACH_RD88F5181L_FXO
-	bool "Marvell Orion-VoIP FXO Reference Design"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-VoIP FXO (88F5181L) RD.
-
-config MACH_RD88F6183AP_GE
-	bool "Marvell Orion-1-90 AP GE Reference Design"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-1-90 (88F6183) AP GE RD.
-
 endif
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 1a585a62d5e6..6f54d7fef27a 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -1,24 +1,16 @@
 # SPDX-License-Identifier: GPL-2.0
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+ccflags-y := -I$(srctree)/arch/arm/plat-orion/include
 
 obj-y				+= common.o pci.o irq.o mpp.o
-obj-$(CONFIG_MACH_DB88F5281)	+= db88f5281-setup.o
-obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o
 obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
 obj-$(CONFIG_MACH_TERASTATION_PRO2)	+= terastation_pro2-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
-obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
 obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
 obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o tsx09-common.o
 obj-$(CONFIG_MACH_TS409)	+= ts409-setup.o tsx09-common.o
-obj-$(CONFIG_MACH_WRT350N_V2)	+= wrt350n-v2-setup.o
 obj-$(CONFIG_MACH_TS78XX)	+= ts78xx-setup.o
 obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
 obj-$(CONFIG_MACH_NET2BIG)	+= net2big-setup.o
-obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
-obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
-obj-$(CONFIG_MACH_RD88F5181L_FXO)	+= rd88f5181l-fxo-setup.o
-obj-$(CONFIG_MACH_RD88F6183AP_GE)	+= rd88f6183ap-ge-setup.o
 
 obj-$(CONFIG_ARCH_ORION5X_DT)		+= board-dt.o
 obj-$(CONFIG_MACH_D2NET_DT)	+= board-d2net.o
diff --git a/arch/arm/mach-orion5x/board-d2net.c b/arch/arm/mach-orion5x/board-d2net.c
index 0297e302d7bc..09bf366d05ff 100644
--- a/arch/arm/mach-orion5x/board-d2net.c
+++ b/arch/arm/mach-orion5x/board-d2net.c
@@ -14,6 +14,7 @@
 #include <linux/irq.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
@@ -55,12 +56,9 @@ static struct gpio_led d2net_leds[] = {
 	{
 		.name = "d2net:blue:sata",
 		.default_trigger = "default-on",
-		.gpio = D2NET_GPIO_BLUE_LED_OFF,
-		.active_low = 1,
 	},
 	{
 		.name = "d2net:red:fail",
-		.gpio = D2NET_GPIO_RED_LED,
 	},
 };
 
@@ -77,6 +75,17 @@ static struct platform_device d2net_gpio_leds = {
 	},
 };
 
+static struct gpiod_lookup_table d2net_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("orion_gpio0", D2NET_GPIO_BLUE_LED_OFF, NULL,
+				0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", D2NET_GPIO_RED_LED, NULL,
+				1, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static void __init d2net_gpio_leds_init(void)
 {
 	int err;
@@ -91,6 +100,7 @@ static void __init d2net_gpio_leds_init(void)
 	if (err)
 		pr_err("d2net: failed to configure blue LED blink GPIO\n");
 
+	gpiod_add_lookup_table(&d2net_leds_gpio_table);
 	platform_device_register(&d2net_gpio_leds);
 }
 
diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c
index e3736ffc8347..be47492c6640 100644
--- a/arch/arm/mach-orion5x/board-dt.c
+++ b/arch/arm/mach-orion5x/board-dt.c
@@ -60,6 +60,9 @@ static void __init orion5x_dt_init(void)
 	if (of_machine_is_compatible("maxtor,shared-storage-2"))
 		mss2_init();
 
+	if (of_machine_is_compatible("lacie,d2-network"))
+		d2net_init();
+
 	of_platform_default_populate(NULL, orion5x_auxdata_lookup, NULL);
 }
 
diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c
index b0f16d223adf..9e3d69891d2f 100644
--- a/arch/arm/mach-orion5x/board-mss2.c
+++ b/arch/arm/mach-orion5x/board-mss2.c
@@ -82,5 +82,5 @@ static void mss2_power_off(void)
 void __init mss2_init(void)
 {
 	/* register mss2 specific power-off method */
-	pm_power_off = mss2_power_off;
+	register_platform_power_off(mss2_power_off);
 }
diff --git a/arch/arm/mach-orion5x/board-rd88f5182.c b/arch/arm/mach-orion5x/board-rd88f5182.c
index 596601367989..1c14e49a90a6 100644
--- a/arch/arm/mach-orion5x/board-rd88f5182.c
+++ b/arch/arm/mach-orion5x/board-rd88f5182.c
@@ -9,6 +9,7 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 2e711b7252c6..df056d60b675 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -18,7 +18,6 @@
 #include <linux/delay.h>
 #include <linux/clk-provider.h>
 #include <linux/cpu.h>
-#include <linux/platform_data/dsa.h>
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <asm/system_misc.h>
@@ -101,15 +100,6 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 
 
 /*****************************************************************************
- * Ethernet switch
- ****************************************************************************/
-void __init orion5x_eth_switch_init(struct dsa_chip_data *d)
-{
-	orion_ge00_switch_init(d);
-}
-
-
-/*****************************************************************************
  * I2C
  ****************************************************************************/
 void __init orion5x_i2c_init(void)
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index eb96009e21c4..8df70e23aa82 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -4,7 +4,6 @@
 
 #include <linux/reboot.h>
 
-struct dsa_chip_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 
@@ -42,7 +41,6 @@ void orion5x_setup_wins(void);
 void orion5x_ehci0_init(void);
 void orion5x_ehci1_init(void);
 void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
-void orion5x_eth_switch_init(struct dsa_chip_data *d);
 void orion5x_i2c_init(void);
 void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
 void orion5x_spi_init(void);
@@ -75,6 +73,12 @@ extern void mss2_init(void);
 static inline void mss2_init(void) {}
 #endif
 
+#ifdef CONFIG_MACH_D2NET_DT
+void d2net_init(void);
+#else
+static inline void d2net_init(void) {}
+#endif
+
 /*****************************************************************************
  * Helpers to access Orion registers
  ****************************************************************************/
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
deleted file mode 100644
index fe1a4cef1ba2..000000000000
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ /dev/null
@@ -1,376 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-orion5x/db88f5281-setup.c
- *
- * Marvell Orion-2 Development Board Setup
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/timer.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <linux/platform_data/mtd-orion_nand.h>
-#include "common.h"
-#include "mpp.h"
-#include "orion5x.h"
-
-/*****************************************************************************
- * DB-88F5281 on board devices
- ****************************************************************************/
-
-/*
- * 512K NOR flash Device bus boot chip select
- */
-
-#define DB88F5281_NOR_BOOT_BASE		0xf4000000
-#define DB88F5281_NOR_BOOT_SIZE		SZ_512K
-
-/*
- * 7-Segment on Device bus chip select 0
- */
-
-#define DB88F5281_7SEG_BASE		0xfa000000
-#define DB88F5281_7SEG_SIZE		SZ_1K
-
-/*
- * 32M NOR flash on Device bus chip select 1
- */
-
-#define DB88F5281_NOR_BASE		0xfc000000
-#define DB88F5281_NOR_SIZE		SZ_32M
-
-/*
- * 32M NAND flash on Device bus chip select 2
- */
-
-#define DB88F5281_NAND_BASE		0xfa800000
-#define DB88F5281_NAND_SIZE		SZ_1K
-
-/*
- * PCI
- */
-
-#define DB88F5281_PCI_SLOT0_OFFS		7
-#define DB88F5281_PCI_SLOT0_IRQ_PIN		12
-#define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN	13
-
-/*****************************************************************************
- * 512M NOR Flash on Device bus Boot CS
- ****************************************************************************/
-
-static struct physmap_flash_data db88f5281_boot_flash_data = {
-	.width		= 1,	/* 8 bit bus width */
-};
-
-static struct resource db88f5281_boot_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= DB88F5281_NOR_BOOT_BASE,
-	.end		= DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device db88f5281_boot_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &db88f5281_boot_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &db88f5281_boot_flash_resource,
-};
-
-/*****************************************************************************
- * 32M NOR Flash on Device bus CS1
- ****************************************************************************/
-
-static struct physmap_flash_data db88f5281_nor_flash_data = {
-	.width		= 4,	/* 32 bit bus width */
-};
-
-static struct resource db88f5281_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= DB88F5281_NOR_BASE,
-	.end		= DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1,
-};
-
-static struct platform_device db88f5281_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &db88f5281_nor_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &db88f5281_nor_flash_resource,
-};
-
-/*****************************************************************************
- * 32M NAND Flash on Device bus CS2
- ****************************************************************************/
-
-static struct mtd_partition db88f5281_nand_parts[] = {
-	{
-		.name = "kernel",
-		.offset = 0,
-		.size = SZ_2M,
-	}, {
-		.name = "root",
-		.offset = SZ_2M,
-		.size = (SZ_16M - SZ_2M),
-	}, {
-		.name = "user",
-		.offset = SZ_16M,
-		.size = SZ_8M,
-	}, {
-		.name = "recovery",
-		.offset = (SZ_16M + SZ_8M),
-		.size = SZ_8M,
-	},
-};
-
-static struct resource db88f5281_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= DB88F5281_NAND_BASE,
-	.end		= DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1,
-};
-
-static struct orion_nand_data db88f5281_nand_data = {
-	.parts		= db88f5281_nand_parts,
-	.nr_parts	= ARRAY_SIZE(db88f5281_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-};
-
-static struct platform_device db88f5281_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &db88f5281_nand_data,
-	},
-	.resource	= &db88f5281_nand_resource,
-	.num_resources	= 1,
-};
-
-/*****************************************************************************
- * 7-Segment on Device bus CS0
- * Dummy counter every 2 sec
- ****************************************************************************/
-
-static void __iomem *db88f5281_7seg;
-static struct timer_list db88f5281_timer;
-
-static void db88f5281_7seg_event(struct timer_list *unused)
-{
-	static int count = 0;
-	writel(0, db88f5281_7seg + (count << 4));
-	count = (count + 1) & 7;
-	mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
-}
-
-static int __init db88f5281_7seg_init(void)
-{
-	if (machine_is_db88f5281()) {
-		db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE,
-					DB88F5281_7SEG_SIZE);
-		if (!db88f5281_7seg) {
-			printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n");
-			return -EIO;
-		}
-		timer_setup(&db88f5281_timer, db88f5281_7seg_event, 0);
-		mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
-	}
-
-	return 0;
-}
-
-__initcall(db88f5281_7seg_init);
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-
-static void __init db88f5281_pci_preinit(void)
-{
-	int pin;
-
-	/*
-	 * Configure PCI GPIO IRQ pins
-	 */
-	pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
-	if (gpio_request(pin, "PCI Int1") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "db88f5281_pci_preinit failed to "
-					"set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
-	}
-
-	pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
-	if (gpio_request(pin, "PCI Int2") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "db88f5281_pci_preinit failed "
-					"to set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
-	}
-}
-
-static int __init db88f5281_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * PCI IRQs are connected via GPIOs.
-	 */
-	switch (slot - DB88F5281_PCI_SLOT0_OFFS) {
-	case 0:
-		return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN);
-	case 1:
-	case 2:
-		return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN);
-	default:
-		return -1;
-	}
-}
-
-static struct hw_pci db88f5281_pci __initdata = {
-	.nr_controllers	= 2,
-	.preinit	= db88f5281_pci_preinit,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= db88f5281_pci_map_irq,
-};
-
-static int __init db88f5281_pci_init(void)
-{
-	if (machine_is_db88f5281())
-		pci_common_init(&db88f5281_pci);
-
-	return 0;
-}
-
-subsys_initcall(db88f5281_pci_init);
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-static struct mv643xx_eth_platform_data db88f5281_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * RTC DS1339 on I2C bus
- ****************************************************************************/
-static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
-	I2C_BOARD_INFO("ds1339", 0x68),
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int db88f5281_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* USB Over Current */
-	MPP1_GPIO,		/* USB Vbat input */
-	MPP2_PCI_ARB,		/* PCI_REQn[2] */
-	MPP3_PCI_ARB,		/* PCI_GNTn[2] */
-	MPP4_PCI_ARB,		/* PCI_REQn[3] */
-	MPP5_PCI_ARB,		/* PCI_GNTn[3] */
-	MPP6_GPIO,		/* JP0, CON17.2 */
-	MPP7_GPIO,		/* JP1, CON17.1 */
-	MPP8_GPIO,		/* JP2, CON11.2 */
-	MPP9_GPIO,		/* JP3, CON11.3 */
-	MPP10_GPIO,		/* RTC int */
-	MPP11_GPIO,		/* Baud Rate Generator */
-	MPP12_GPIO,		/* PCI int 1 */
-	MPP13_GPIO,		/* PCI int 2 */
-	MPP14_NAND,		/* NAND_REn[2] */
-	MPP15_NAND,		/* NAND_WEn[2] */
-	MPP16_UART,		/* UART1_RX */
-	MPP17_UART,		/* UART1_TX */
-	MPP18_UART,		/* UART1_CTSn */
-	MPP19_UART,		/* UART1_RTSn */
-	0,
-};
-
-static void __init db88f5281_init(void)
-{
-	/*
-	 * Basic Orion setup. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(db88f5281_mpp_modes);
-	writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&db88f5281_eth_data);
-	orion5x_i2c_init();
-	orion5x_uart0_init();
-	orion5x_uart1_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    DB88F5281_NOR_BOOT_BASE,
-				    DB88F5281_NOR_BOOT_SIZE);
-	platform_device_register(&db88f5281_boot_flash);
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
-				    ORION_MBUS_DEVBUS_ATTR(0),
-				    DB88F5281_7SEG_BASE,
-				    DB88F5281_7SEG_SIZE);
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
-				    ORION_MBUS_DEVBUS_ATTR(1),
-				    DB88F5281_NOR_BASE,
-				    DB88F5281_NOR_SIZE);
-	platform_device_register(&db88f5281_nor_flash);
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(2),
-				    ORION_MBUS_DEVBUS_ATTR(2),
-				    DB88F5281_NAND_BASE,
-				    DB88F5281_NAND_SIZE);
-	platform_device_register(&db88f5281_nand_flash);
-
-	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
-}
-
-MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
-	/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= db88f5281_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index d69259b6b60d..fcd38ff7ca45 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -14,6 +14,7 @@
  *
  */
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -254,37 +255,64 @@ error_fail:
 static struct gpio_led dns323ab_leds[] = {
 	{
 		.name = "power:blue",
-		.gpio = DNS323_GPIO_LED_POWER2,
 		.default_trigger = "default-on",
 	}, {
 		.name = "right:amber",
-		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
-		.active_low = 1,
 	}, {
 		.name = "left:amber",
-		.gpio = DNS323_GPIO_LED_LEFT_AMBER,
-		.active_low = 1,
 	},
 };
 
+static struct gpiod_lookup_table dns323a1_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_POWER2, NULL,
+				0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_RIGHT_AMBER, NULL,
+				1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_LEFT_AMBER, NULL,
+				2, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+/* B1 is the same but power LED is active high */
+static struct gpiod_lookup_table dns323b1_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_POWER2, NULL,
+				0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_RIGHT_AMBER, NULL,
+				1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_LEFT_AMBER, NULL,
+				2, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
 
 static struct gpio_led dns323c_leds[] = {
 	{
 		.name = "power:blue",
-		.gpio = DNS323C_GPIO_LED_POWER,
 		.default_trigger = "timer",
-		.active_low = 1,
 	}, {
 		.name = "right:amber",
-		.gpio = DNS323C_GPIO_LED_RIGHT_AMBER,
-		.active_low = 1,
 	}, {
 		.name = "left:amber",
-		.gpio = DNS323C_GPIO_LED_LEFT_AMBER,
-		.active_low = 1,
 	},
 };
 
+static struct gpiod_lookup_table dns323c_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("orion_gpio0", DNS323C_GPIO_LED_POWER, NULL,
+				0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", DNS323C_GPIO_LED_RIGHT_AMBER, NULL,
+				1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", DNS323C_GPIO_LED_LEFT_AMBER, NULL,
+				2, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
 
 static struct gpio_led_platform_data dns323ab_led_data = {
 	.num_leds	= ARRAY_SIZE(dns323ab_leds),
@@ -621,16 +649,21 @@ static void __init dns323_init(void)
 		/* The 5181 power LED is active low and requires
 		 * DNS323_GPIO_LED_POWER1 to also be low.
 		 */
-		 dns323ab_leds[0].active_low = 1;
-		 gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
-		 gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
-		fallthrough;
+		gpiod_add_lookup_table(&dns323a1_leds_gpio_table);
+		gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
+		gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
+		i2c_register_board_info(0, dns323ab_i2c_devices,
+					ARRAY_SIZE(dns323ab_i2c_devices));
+
+		break;
 	case DNS323_REV_B1:
+		gpiod_add_lookup_table(&dns323b1_leds_gpio_table);
 		i2c_register_board_info(0, dns323ab_i2c_devices,
 				ARRAY_SIZE(dns323ab_i2c_devices));
 		break;
 	case DNS323_REV_C1:
 		/* Hookup LEDs & Buttons */
+		gpiod_add_lookup_table(&dns323c_leds_gpio_table);
 		dns323_gpio_leds.dev.platform_data = &dns323c_led_data;
 		dns323_button_device.dev.platform_data = &dns323c_button_data;
 
@@ -667,7 +700,7 @@ static void __init dns323_init(void)
 		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
 			pr_err("DNS-323: failed to setup power-off GPIO\n");
-		pm_power_off = dns323a_power_off;
+		register_platform_power_off(dns323a_power_off);
 		break;
 	case DNS323_REV_B1:
 		/* 5182 built-in SATA init */
@@ -684,7 +717,7 @@ static void __init dns323_init(void)
 		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
 			pr_err("DNS-323: failed to setup power-off GPIO\n");
-		pm_power_off = dns323b_power_off;
+		register_platform_power_off(dns323b_power_off);
 		break;
 	case DNS323_REV_C1:
 		/* 5182 built-in SATA init */
@@ -694,7 +727,7 @@ static void __init dns323_init(void)
 		if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 		    gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0)
 			pr_err("DNS-323: failed to setup power-off GPIO\n");
-		pm_power_off = dns323c_power_off;
+		register_platform_power_off(dns323c_power_off);
 
 		/* Now, -this- should theoretically be done by the sata_mv driver
 		 * once I figure out what's going on there. Maybe the behaviour
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index acba06618080..339b10891808 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -373,7 +373,7 @@ static void __init kurobox_pro_init(void)
 	i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
 
 	/* register Kurobox Pro specific power-off method */
-	pm_power_off = kurobox_pro_power_off;
+	register_platform_power_off(kurobox_pro_power_off);
 }
 
 #ifdef CONFIG_MACH_KUROBOX_PRO
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
deleted file mode 100644
index af07f617465f..000000000000
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ /dev/null
@@ -1,275 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-orion5x/ls_hgl-setup.c
- *
- * Maintainer: Zhu Qingsen <zhuqs@cn.fujitsu.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "common.h"
-#include "mpp.h"
-#include "orion5x.h"
-
-/*****************************************************************************
- * Linkstation LS-HGL Info
- ****************************************************************************/
-
-/*
- * 256K NOR flash Device bus boot chip select
- */
-
-#define LS_HGL_NOR_BOOT_BASE	0xf4000000
-#define LS_HGL_NOR_BOOT_SIZE	SZ_256K
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data ls_hgl_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource ls_hgl_nor_flash_resource = {
-	.flags	= IORESOURCE_MEM,
-	.start	= LS_HGL_NOR_BOOT_BASE,
-	.end	= LS_HGL_NOR_BOOT_BASE + LS_HGL_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device ls_hgl_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &ls_hgl_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &ls_hgl_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data ls_hgl_eth_data = {
-	.phy_addr	= 8,
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-static struct i2c_board_info __initdata ls_hgl_i2c_rtc = {
-	I2C_BOARD_INFO("rs5c372a", 0x32),
-};
-
-/*****************************************************************************
- * LEDs attached to GPIO
- ****************************************************************************/
-
-#define LS_HGL_GPIO_LED_ALARM   2
-#define LS_HGL_GPIO_LED_INFO    3
-#define LS_HGL_GPIO_LED_FUNC    17
-#define LS_HGL_GPIO_LED_PWR     0
-
-
-static struct gpio_led ls_hgl_led_pins[] = {
-	{
-		.name	   = "alarm:red",
-		.gpio	   = LS_HGL_GPIO_LED_ALARM,
-		.active_low     = 1,
-	}, {
-		.name	   = "info:amber",
-		.gpio	   = LS_HGL_GPIO_LED_INFO,
-		.active_low     = 1,
-	}, {
-		.name	   = "func:blue:top",
-		.gpio	   = LS_HGL_GPIO_LED_FUNC,
-		.active_low     = 1,
-	}, {
-		.name	   = "power:blue:bottom",
-		.gpio	   = LS_HGL_GPIO_LED_PWR,
-	},
-};
-
-static struct gpio_led_platform_data ls_hgl_led_data = {
-	.leds	   = ls_hgl_led_pins,
-	.num_leds       = ARRAY_SIZE(ls_hgl_led_pins),
-};
-
-static struct platform_device ls_hgl_leds = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &ls_hgl_led_data,
-	},
-};
-
-/****************************************************************************
- * GPIO Attached Keys
- ****************************************************************************/
-#define LS_HGL_GPIO_KEY_FUNC       15
-#define LS_HGL_GPIO_KEY_POWER      8
-#define LS_HGL_GPIO_KEY_AUTOPOWER  10
-
-#define LS_HGL_SW_POWER     0x00
-#define LS_HGL_SW_AUTOPOWER 0x01
-
-static struct gpio_keys_button ls_hgl_buttons[] = {
-	{
-		.code	   = KEY_OPTION,
-		.gpio	   = LS_HGL_GPIO_KEY_FUNC,
-		.desc	   = "Function Button",
-		.active_low     = 1,
-	}, {
-		.type		= EV_SW,
-		.code	   = LS_HGL_SW_POWER,
-		.gpio	   = LS_HGL_GPIO_KEY_POWER,
-		.desc	   = "Power-on Switch",
-		.active_low     = 1,
-	}, {
-		.type		= EV_SW,
-		.code	   = LS_HGL_SW_AUTOPOWER,
-		.gpio	   = LS_HGL_GPIO_KEY_AUTOPOWER,
-		.desc	   = "Power-auto Switch",
-		.active_low     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data ls_hgl_button_data = {
-	.buttons	= ls_hgl_buttons,
-	.nbuttons       = ARRAY_SIZE(ls_hgl_buttons),
-};
-
-static struct platform_device ls_hgl_button_device = {
-	.name	   = "gpio-keys",
-	.id	     = -1,
-	.num_resources  = 0,
-	.dev	    = {
-		.platform_data  = &ls_hgl_button_data,
-	},
-};
-
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data ls_hgl_sata_data = {
-	.n_ports	= 2,
-};
-
-
-/*****************************************************************************
- * Linkstation LS-HGL specific power off method: reboot
- ****************************************************************************/
-/*
- * On the Linkstation LS-HGL, the shutdown process is following:
- * - Userland monitors key events until the power switch goes to off position
- * - The board reboots
- * - U-boot starts and goes into an idle mode waiting for the user
- *   to move the switch to ON position
- */
-
-static void ls_hgl_power_off(void)
-{
-	orion5x_restart(REBOOT_HARD, NULL);
-}
-
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-#define LS_HGL_GPIO_USB_POWER	9
-#define LS_HGL_GPIO_AUTO_POWER	10
-#define LS_HGL_GPIO_POWER	    8
-
-#define LS_HGL_GPIO_HDD_POWER	1
-
-static unsigned int ls_hgl_mpp_modes[] __initdata = {
-	MPP0_GPIO, /* LED_PWR */
-	MPP1_GPIO, /* HDD_PWR */
-	MPP2_GPIO, /* LED_ALARM */
-	MPP3_GPIO, /* LED_INFO */
-	MPP4_UNUSED,
-	MPP5_UNUSED,
-	MPP6_GPIO, /* FAN_LCK */
-	MPP7_GPIO, /* INIT */
-	MPP8_GPIO, /* POWER */
-	MPP9_GPIO, /* USB_PWR */
-	MPP10_GPIO, /* AUTO_POWER */
-	MPP11_UNUSED, /* LED_ETH (dummy) */
-	MPP12_UNUSED,
-	MPP13_UNUSED,
-	MPP14_UNUSED,
-	MPP15_GPIO, /* FUNC */
-	MPP16_UNUSED,
-	MPP17_GPIO, /* LED_FUNC */
-	MPP18_UNUSED,
-	MPP19_UNUSED,
-	0,
-};
-
-static void __init ls_hgl_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(ls_hgl_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&ls_hgl_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&ls_hgl_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    LS_HGL_NOR_BOOT_BASE,
-				    LS_HGL_NOR_BOOT_SIZE);
-	platform_device_register(&ls_hgl_nor_flash);
-
-	platform_device_register(&ls_hgl_button_device);
-
-	platform_device_register(&ls_hgl_leds);
-
-	i2c_register_board_info(0, &ls_hgl_i2c_rtc, 1);
-
-	/* enable USB power */
-	gpio_set_value(LS_HGL_GPIO_USB_POWER, 1);
-
-	/* register power-off method */
-	pm_power_off = ls_hgl_power_off;
-
-	pr_info("%s: finished\n", __func__);
-}
-
-MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
-	/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= ls_hgl_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 2bf8ec75e908..5b0249f109cd 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -8,6 +8,7 @@
  * License, or (at your option) any later version.
  */
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -139,34 +140,45 @@ static struct i2c_board_info __initdata mv2120_i2c_rtc = {
 static struct gpio_led mv2120_led_pins[] = {
 	{
 		.name			= "mv2120:blue:health",
-		.gpio			= 0,
 	},
 	{
 		.name			= "mv2120:red:health",
-		.gpio			= 1,
 	},
 	{
 		.name			= "mv2120:led:bright",
-		.gpio			= 4,
 		.default_trigger	= "default-on",
 	},
 	{
 		.name			= "mv2120:led:dimmed",
-		.gpio			= 5,
 	},
 	{
 		.name			= "mv2120:red:sata0",
-		.gpio			= 8,
-		.active_low		= 1,
 	},
 	{
 		.name			= "mv2120:red:sata1",
-		.gpio			= 9,
-		.active_low		= 1,
 	},
 
 };
 
+static struct gpiod_lookup_table mv2120_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("orion_gpio0", 0, NULL,
+				0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("orion_gpio0", 1, NULL,
+				1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("orion_gpio0", 4, NULL,
+				2, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("orion_gpio0", 5, NULL,
+				3, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("orion_gpio0", 8, NULL,
+				4, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", 9, NULL,
+				5, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct gpio_led_platform_data mv2120_led_data = {
 	.leds		= mv2120_led_pins,
 	.num_leds	= ARRAY_SIZE(mv2120_led_pins),
@@ -219,13 +231,14 @@ static void __init mv2120_init(void)
 			gpio_free(MV2120_GPIO_RTC_IRQ);
 	}
 	i2c_register_board_info(0, &mv2120_i2c_rtc, 1);
+	gpiod_add_lookup_table(&mv2120_leds_gpio_table);
 	platform_device_register(&mv2120_leds);
 
 	/* register mv2120 specific power-off method */
 	if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 	    gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
 		pr_err("mv2120: failed to setup power-off GPIO\n");
-	pm_power_off = mv2120_power_off;
+	register_platform_power_off(mv2120_power_off);
 }
 
 /* Warning: HP uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 695cc683cd83..4afd9b4c71a9 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -18,6 +18,7 @@
 #include <linux/i2c.h>
 #include <linux/ata_platform.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/delay.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -214,19 +215,30 @@ err_free_1:
 static struct gpio_led net2big_leds[] = {
 	{
 		.name = "net2big:red:power",
-		.gpio = NET2BIG_GPIO_PWR_RED_LED,
 	},
 	{
 		.name = "net2big:blue:power",
-		.gpio = NET2BIG_GPIO_PWR_BLUE_LED,
 	},
 	{
 		.name = "net2big:red:sata0",
-		.gpio = NET2BIG_GPIO_SATA0_RED_LED,
 	},
 	{
 		.name = "net2big:red:sata1",
-		.gpio = NET2BIG_GPIO_SATA1_RED_LED,
+	},
+};
+
+static struct gpiod_lookup_table net2big_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_PWR_RED_LED, NULL,
+				0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_PWR_BLUE_LED, NULL,
+				1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_SATA0_RED_LED, NULL,
+				2, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_SATA1_RED_LED, NULL,
+				3, GPIO_ACTIVE_HIGH),
+		{ },
 	},
 };
 
@@ -282,6 +294,7 @@ static void __init net2big_gpio_leds_init(void)
 	if (err)
 		pr_err("net2big: failed to setup SATA1 blue LED GPIO\n");
 
+	gpiod_add_lookup_table(&net2big_leds_gpio_table);
 	platform_device_register(&net2big_gpio_leds);
 }
 
@@ -410,7 +423,7 @@ static void __init net2big_init(void)
 
 	if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
 	    gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = net2big_power_off;
+		register_platform_power_off(net2big_power_off);
 	else
 		pr_err("net2big: failed to configure power-off GPIO\n");
 
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 888fdc9099c5..3313bc5a63ea 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -522,14 +522,14 @@ static int __init pci_setup(struct pci_sys_data *sys)
 static void rc_pci_fixup(struct pci_dev *dev)
 {
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
-		int i;
+		struct resource *r;
 
 		dev->class &= 0xff;
 		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
-		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
+		pci_dev_for_each_resource(dev, r) {
+			r->start	= 0;
+			r->end		= 0;
+			r->flags	= 0;
 		}
 	}
 }
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
deleted file mode 100644
index 432fc8357d9e..000000000000
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
- *
- * Marvell Orion-VoIP FXO Reference Design Setup
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/platform_data/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "common.h"
-#include "mpp.h"
-#include "orion5x.h"
-
-/*****************************************************************************
- * RD-88F5181L FXO Info
- ****************************************************************************/
-/*
- * 8M NOR flash Device bus boot chip select
- */
-#define RD88F5181L_FXO_NOR_BOOT_BASE		0xff800000
-#define RD88F5181L_FXO_NOR_BOOT_SIZE		SZ_8M
-
-
-/*****************************************************************************
- * 8M NOR Flash on Device bus Boot chip select
- ****************************************************************************/
-static struct physmap_flash_data rd88f5181l_fxo_nor_boot_flash_data = {
-	.width		= 1,
-};
-
-static struct resource rd88f5181l_fxo_nor_boot_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= RD88F5181L_FXO_NOR_BOOT_BASE,
-	.end		= RD88F5181L_FXO_NOR_BOOT_BASE +
-			  RD88F5181L_FXO_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device rd88f5181l_fxo_nor_boot_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &rd88f5181l_fxo_nor_boot_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &rd88f5181l_fxo_nor_boot_flash_resource,
-};
-
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int rd88f5181l_fxo_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* LED1 CardBus LED (front panel) */
-	MPP1_GPIO,		/* PCI_intA */
-	MPP2_GPIO,		/* Hard Reset / Factory Init*/
-	MPP3_GPIO,		/* FXS or DAA select */
-	MPP4_GPIO,		/* LED6 - phone LED (front panel) */
-	MPP5_GPIO,		/* LED5 - phone LED (front panel) */
-	MPP6_PCI_CLK,		/* CPU PCI refclk */
-	MPP7_PCI_CLK,		/* PCI/PCIe refclk */
-	MPP8_GPIO,		/* CardBus reset */
-	MPP9_GPIO,		/* GE_RXERR */
-	MPP10_GPIO,		/* LED2 MiniPCI LED (front panel) */
-	MPP11_GPIO,		/* Lifeline control */
-	MPP12_GIGE,		/* GE_TXD[4] */
-	MPP13_GIGE,		/* GE_TXD[5] */
-	MPP14_GIGE,		/* GE_TXD[6] */
-	MPP15_GIGE,		/* GE_TXD[7] */
-	MPP16_GIGE,		/* GE_RXD[4] */
-	MPP17_GIGE,		/* GE_RXD[5] */
-	MPP18_GIGE,		/* GE_RXD[6] */
-	MPP19_GIGE,		/* GE_RXD[7] */
-	0,
-};
-
-static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
-	.port_names[0]	= "lan2",
-	.port_names[1]	= "lan1",
-	.port_names[2]	= "wan",
-	.port_names[3]	= "cpu",
-	.port_names[5]	= "lan4",
-	.port_names[7]	= "lan3",
-};
-
-static void __init rd88f5181l_fxo_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(rd88f5181l_fxo_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_chip_data);
-	orion5x_uart0_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    RD88F5181L_FXO_NOR_BOOT_BASE,
-				    RD88F5181L_FXO_NOR_BOOT_SIZE);
-	platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
-}
-
-static int __init
-rd88f5181l_fxo_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * Mini-PCI / Cardbus slot.
-	 */
-	return gpio_to_irq(1);
-}
-
-static struct hw_pci rd88f5181l_fxo_pci __initdata = {
-	.nr_controllers	= 2,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= rd88f5181l_fxo_pci_map_irq,
-};
-
-static int __init rd88f5181l_fxo_pci_init(void)
-{
-	if (machine_is_rd88f5181l_fxo()) {
-		orion5x_pci_set_cardbus_mode();
-		pci_common_init(&rd88f5181l_fxo_pci);
-	}
-
-	return 0;
-}
-subsys_initcall(rd88f5181l_fxo_pci_init);
-
-MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
-	/* Maintainer: Nicolas Pitre <nico@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= rd88f5181l_fxo_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
deleted file mode 100644
index d4b1a9c3cd36..000000000000
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ /dev/null
@@ -1,183 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
- *
- * Marvell Orion-VoIP GE Reference Design Setup
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "common.h"
-#include "mpp.h"
-#include "orion5x.h"
-
-/*****************************************************************************
- * RD-88F5181L GE Info
- ****************************************************************************/
-/*
- * 16M NOR flash Device bus boot chip select
- */
-#define RD88F5181L_GE_NOR_BOOT_BASE		0xff000000
-#define RD88F5181L_GE_NOR_BOOT_SIZE		SZ_16M
-
-
-/*****************************************************************************
- * 16M NOR Flash on Device bus Boot chip select
- ****************************************************************************/
-static struct physmap_flash_data rd88f5181l_ge_nor_boot_flash_data = {
-	.width		= 1,
-};
-
-static struct resource rd88f5181l_ge_nor_boot_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= RD88F5181L_GE_NOR_BOOT_BASE,
-	.end		= RD88F5181L_GE_NOR_BOOT_BASE +
-			  RD88F5181L_GE_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device rd88f5181l_ge_nor_boot_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &rd88f5181l_ge_nor_boot_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &rd88f5181l_ge_nor_boot_flash_resource,
-};
-
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int rd88f5181l_ge_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* LED1 */
-	MPP1_GPIO,		/* LED5 */
-	MPP2_GPIO,		/* LED4 */
-	MPP3_GPIO,		/* LED3 */
-	MPP4_GPIO,		/* PCI_intA */
-	MPP5_GPIO,		/* RTC interrupt */
-	MPP6_PCI_CLK,		/* CPU PCI refclk */
-	MPP7_PCI_CLK,		/* PCI/PCIe refclk */
-	MPP8_GPIO,		/* 88e6131 interrupt */
-	MPP9_GPIO,		/* GE_RXERR */
-	MPP10_GPIO,		/* PCI_intB */
-	MPP11_GPIO,		/* LED2 */
-	MPP12_GIGE,		/* GE_TXD[4] */
-	MPP13_GIGE,		/* GE_TXD[5] */
-	MPP14_GIGE,		/* GE_TXD[6] */
-	MPP15_GIGE,		/* GE_TXD[7] */
-	MPP16_GIGE,		/* GE_RXD[4] */
-	MPP17_GIGE,		/* GE_RXD[5] */
-	MPP18_GIGE,		/* GE_RXD[6] */
-	MPP19_GIGE,		/* GE_RXD[7] */
-	0,
-};
-
-static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
-	.port_names[0]	= "lan2",
-	.port_names[1]	= "lan1",
-	.port_names[2]	= "wan",
-	.port_names[3]	= "cpu",
-	.port_names[5]	= "lan4",
-	.port_names[7]	= "lan3",
-};
-
-static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
-	I2C_BOARD_INFO("ds1338", 0x68),
-};
-
-static void __init rd88f5181l_ge_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&rd88f5181l_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_ge_switch_chip_data);
-	orion5x_i2c_init();
-	orion5x_uart0_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    RD88F5181L_GE_NOR_BOOT_BASE,
-				    RD88F5181L_GE_NOR_BOOT_SIZE);
-	platform_device_register(&rd88f5181l_ge_nor_boot_flash);
-
-	i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
-}
-
-static int __init
-rd88f5181l_ge_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * Cardbus slot.
-	 */
-	if (pin == 1)
-		return gpio_to_irq(4);
-	else
-		return gpio_to_irq(10);
-}
-
-static struct hw_pci rd88f5181l_ge_pci __initdata = {
-	.nr_controllers	= 2,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= rd88f5181l_ge_pci_map_irq,
-};
-
-static int __init rd88f5181l_ge_pci_init(void)
-{
-	if (machine_is_rd88f5181l_ge()) {
-		orion5x_pci_set_cardbus_mode();
-		pci_common_init(&rd88f5181l_ge_pci);
-	}
-
-	return 0;
-}
-subsys_initcall(rd88f5181l_ge_pci_init);
-
-MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= rd88f5181l_ge_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
deleted file mode 100644
index 6ffcfc6445e2..000000000000
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ /dev/null
@@ -1,288 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-orion5x/rd88f5182-setup.c
- *
- * Marvell Orion-NAS Reference Design Setup
- *
- * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "common.h"
-#include "mpp.h"
-#include "orion5x.h"
-
-/*****************************************************************************
- * RD-88F5182 Info
- ****************************************************************************/
-
-/*
- * 512K NOR flash Device bus boot chip select
- */
-
-#define RD88F5182_NOR_BOOT_BASE		0xf4000000
-#define RD88F5182_NOR_BOOT_SIZE		SZ_512K
-
-/*
- * 16M NOR flash on Device bus chip select 1
- */
-
-#define RD88F5182_NOR_BASE		0xfc000000
-#define RD88F5182_NOR_SIZE		SZ_16M
-
-/*
- * PCI
- */
-
-#define RD88F5182_PCI_SLOT0_OFFS	7
-#define RD88F5182_PCI_SLOT0_IRQ_A_PIN	7
-#define RD88F5182_PCI_SLOT0_IRQ_B_PIN	6
-
-/*****************************************************************************
- * 16M NOR Flash on Device bus CS1
- ****************************************************************************/
-
-static struct physmap_flash_data rd88f5182_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource rd88f5182_nor_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-	.start			= RD88F5182_NOR_BASE,
-	.end			= RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1,
-};
-
-static struct platform_device rd88f5182_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &rd88f5182_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &rd88f5182_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Use GPIO LED as CPU active indication
- ****************************************************************************/
-
-#define RD88F5182_GPIO_LED		0
-
-static struct gpio_led rd88f5182_gpio_led_pins[] = {
-	{
-		.name		= "rd88f5182:cpu",
-		.default_trigger = "cpu0",
-		.gpio		= RD88F5182_GPIO_LED,
-	},
-};
-
-static struct gpio_led_platform_data rd88f5182_gpio_led_data = {
-	.leds		= rd88f5182_gpio_led_pins,
-	.num_leds	= ARRAY_SIZE(rd88f5182_gpio_led_pins),
-};
-
-static struct platform_device rd88f5182_gpio_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &rd88f5182_gpio_led_data,
-	},
-};
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-
-static void __init rd88f5182_pci_preinit(void)
-{
-	int pin;
-
-	/*
-	 * Configure PCI GPIO IRQ pins
-	 */
-	pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
-	if (gpio_request(pin, "PCI IntA") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "rd88f5182_pci_preinit failed to "
-					"set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
-	}
-
-	pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
-	if (gpio_request(pin, "PCI IntB") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "rd88f5182_pci_preinit failed to "
-					"set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
-	}
-}
-
-static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * PCI IRQs are connected via GPIOs
-	 */
-	switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
-	case 0:
-		if (pin == 1)
-			return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
-		else
-			return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
-	default:
-		return -1;
-	}
-}
-
-static struct hw_pci rd88f5182_pci __initdata = {
-	.nr_controllers	= 2,
-	.preinit	= rd88f5182_pci_preinit,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= rd88f5182_pci_map_irq,
-};
-
-static int __init rd88f5182_pci_init(void)
-{
-	if (machine_is_rd88f5182())
-		pci_common_init(&rd88f5182_pci);
-
-	return 0;
-}
-
-subsys_initcall(rd88f5182_pci_init);
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * RTC DS1338 on I2C bus
- ****************************************************************************/
-static struct i2c_board_info __initdata rd88f5182_i2c_rtc = {
-	I2C_BOARD_INFO("ds1338", 0x68),
-};
-
-/*****************************************************************************
- * Sata
- ****************************************************************************/
-static struct mv_sata_platform_data rd88f5182_sata_data = {
-	.n_ports	= 2,
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int rd88f5182_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* Debug Led */
-	MPP1_GPIO,		/* Reset Switch */
-	MPP2_UNUSED,
-	MPP3_GPIO,		/* RTC Int */
-	MPP4_GPIO,
-	MPP5_GPIO,
-	MPP6_GPIO,		/* PCI_intA */
-	MPP7_GPIO,		/* PCI_intB */
-	MPP8_UNUSED,
-	MPP9_UNUSED,
-	MPP10_UNUSED,
-	MPP11_UNUSED,
-	MPP12_SATA_LED,		/* SATA 0 presence */
-	MPP13_SATA_LED,		/* SATA 1 presence */
-	MPP14_SATA_LED,		/* SATA 0 active */
-	MPP15_SATA_LED,		/* SATA 1 active */
-	MPP16_UNUSED,
-	MPP17_UNUSED,
-	MPP18_UNUSED,
-	MPP19_UNUSED,
-	0,
-};
-
-static void __init rd88f5182_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(rd88f5182_mpp_modes);
-
-	/*
-	 * MPP[20] PCI Clock to MV88F5182
-	 * MPP[21] PCI Clock to mini PCI CON11
-	 * MPP[22] USB 0 over current indication
-	 * MPP[23] USB 1 over current indication
-	 * MPP[24] USB 1 over current enable
-	 * MPP[25] USB 0 over current enable
-	 */
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&rd88f5182_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&rd88f5182_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    RD88F5182_NOR_BOOT_BASE,
-				    RD88F5182_NOR_BOOT_SIZE);
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
-				    ORION_MBUS_DEVBUS_ATTR(1),
-				    RD88F5182_NOR_BASE,
-				    RD88F5182_NOR_SIZE);
-	platform_device_register(&rd88f5182_nor_flash);
-	platform_device_register(&rd88f5182_gpio_leds);
-
-	i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
-}
-
-MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
-	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= rd88f5182_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
deleted file mode 100644
index 93f74fd6b4da..000000000000
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-orion5x/rd88f6183-ap-ge-setup.c
- *
- * Marvell Orion-1-90 AP GE Reference Design Setup
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/ethtool.h>
-#include <linux/platform_data/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "common.h"
-#include "orion5x.h"
-
-static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
-	.phy_addr	= -1,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
-	.port_names[0]	= "lan1",
-	.port_names[1]	= "lan2",
-	.port_names[2]	= "lan3",
-	.port_names[3]	= "lan4",
-	.port_names[4]	= "wan",
-	.port_names[5]	= "cpu",
-};
-
-static struct mtd_partition rd88f6183ap_ge_partitions[] = {
-	{
-		.name	= "kernel",
-		.offset	= 0x00000000,
-		.size	= 0x00200000,
-	}, {
-		.name	= "rootfs",
-		.offset	= 0x00200000,
-		.size	= 0x00500000,
-	}, {
-		.name	= "nvram",
-		.offset	= 0x00700000,
-		.size	= 0x00080000,
-	},
-};
-
-static struct flash_platform_data rd88f6183ap_ge_spi_slave_data = {
-	.type		= "m25p64",
-	.nr_parts	= ARRAY_SIZE(rd88f6183ap_ge_partitions),
-	.parts		= rd88f6183ap_ge_partitions,
-};
-
-static struct spi_board_info __initdata rd88f6183ap_ge_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &rd88f6183ap_ge_spi_slave_data,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
-
-static void __init rd88f6183ap_ge_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&rd88f6183ap_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_chip_data);
-	spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
-				ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
-	orion5x_spi_init();
-	orion5x_uart0_init();
-}
-
-static struct hw_pci rd88f6183ap_ge_pci __initdata = {
-	.nr_controllers	= 2,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= orion5x_pci_map_irq,
-};
-
-static int __init rd88f6183ap_ge_pci_init(void)
-{
-	if (machine_is_rd88f6183ap_ge()) {
-		orion5x_pci_disable();
-		pci_common_init(&rd88f6183ap_ge_pci);
-	}
-
-	return 0;
-}
-subsys_initcall(rd88f6183ap_ge_pci_init);
-
-MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= rd88f6183ap_ge_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 23a5521c6833..a9f01859d101 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -349,7 +349,7 @@ static void __init tsp2_init(void)
 	i2c_register_board_info(0, &tsp2_i2c_rtc, 1);
 
 	/* register Terastation Pro II specific power-off method */
-	pm_power_off = tsp2_power_off;
+	register_platform_power_off(tsp2_power_off);
 }
 
 MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index bab8ba0e01ab..de9092e992c5 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -314,7 +314,7 @@ static void __init qnap_ts209_init(void)
 	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
 
 	/* register tsx09 specific power-off method */
-	pm_power_off = qnap_tsx09_power_off;
+	register_platform_power_off(qnap_tsx09_power_off);
 }
 
 MACHINE_START(TS209, "QNAP TS-109/TS-209")
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 6f60dc1dfa22..725688aa5cba 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -8,6 +8,7 @@
  * Copyright (C) 2008  Martin Michlmayr <tbm@cyrius.com>
  */
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -168,20 +169,27 @@ static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = {
 static struct gpio_led ts409_led_pins[] = {
 	{
 		.name		= "ts409:red:sata1",
-		.gpio		= 4,
-		.active_low	= 1,
 	}, {
 		.name		= "ts409:red:sata2",
-		.gpio		= 5,
-		.active_low	= 1,
 	}, {
 		.name		= "ts409:red:sata3",
-		.gpio		= 6,
-		.active_low	= 1,
 	}, {
 		.name		= "ts409:red:sata4",
-		.gpio		= 7,
-		.active_low	= 1,
+	},
+};
+
+static struct gpiod_lookup_table ts409_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("orion_gpio0", 4, NULL,
+				0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", 5, NULL,
+				1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", 6, NULL,
+				2, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", 7, NULL,
+				3, GPIO_ACTIVE_LOW),
+		{ },
 	},
 };
 
@@ -300,10 +308,11 @@ static void __init qnap_ts409_init(void)
 	if (qnap_ts409_i2c_rtc.irq == 0)
 		pr_warn("qnap_ts409_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
+	gpiod_add_lookup_table(&ts409_leds_gpio_table);
 	platform_device_register(&ts409_leds);
 
 	/* register tsx09 specific power-off method */
-	pm_power_off = qnap_tsx09_power_off;
+	register_platform_power_off(qnap_tsx09_power_off);
 }
 
 MACHINE_START(TS409, "QNAP TS-409")
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
deleted file mode 100644
index e5f327054dd3..000000000000
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// arch/arm/mach-orion5x/wnr854t-setup.c
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/platform_data/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "orion5x.h"
-#include "common.h"
-#include "mpp.h"
-
-static unsigned int wnr854t_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* Power LED green (0=on) */
-	MPP1_GPIO,		/* Reset Button (0=off) */
-	MPP2_GPIO,		/* Power LED blink (0=off) */
-	MPP3_GPIO,		/* WAN Status LED amber (0=off) */
-	MPP4_GPIO,		/* PCI int */
-	MPP5_GPIO,		/* ??? */
-	MPP6_GPIO,		/* ??? */
-	MPP7_GPIO,		/* ??? */
-	MPP8_UNUSED,		/* ??? */
-	MPP9_GIGE,		/* GE_RXERR */
-	MPP10_UNUSED,		/* ??? */
-	MPP11_UNUSED,		/* ??? */
-	MPP12_GIGE,		/* GE_TXD[4] */
-	MPP13_GIGE,		/* GE_TXD[5] */
-	MPP14_GIGE,		/* GE_TXD[6] */
-	MPP15_GIGE,		/* GE_TXD[7] */
-	MPP16_GIGE,		/* GE_RXD[4] */
-	MPP17_GIGE,		/* GE_RXD[5] */
-	MPP18_GIGE,		/* GE_RXD[6] */
-	MPP19_GIGE,		/* GE_RXD[7] */
-	0,
-};
-
-/*
- * 8M NOR flash Device bus boot chip select
- */
-#define WNR854T_NOR_BOOT_BASE	0xf4000000
-#define WNR854T_NOR_BOOT_SIZE	SZ_8M
-
-static struct mtd_partition wnr854t_nor_flash_partitions[] = {
-	{
-		.name		= "kernel",
-		.offset		= 0x00000000,
-		.size		= 0x00100000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x00100000,
-		.size		= 0x00660000,
-	}, {
-		.name		= "uboot",
-		.offset		= 0x00760000,
-		.size		= 0x00040000,
-	},
-};
-
-static struct physmap_flash_data wnr854t_nor_flash_data = {
-	.width		= 2,
-	.parts		= wnr854t_nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(wnr854t_nor_flash_partitions),
-};
-
-static struct resource wnr854t_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= WNR854T_NOR_BOOT_BASE,
-	.end		= WNR854T_NOR_BOOT_BASE + WNR854T_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device wnr854t_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &wnr854t_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &wnr854t_nor_flash_resource,
-};
-
-static struct mv643xx_eth_platform_data wnr854t_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data wnr854t_switch_chip_data = {
-	.port_names[0] = "lan3",
-	.port_names[1] = "lan4",
-	.port_names[2] = "wan",
-	.port_names[3] = "cpu",
-	.port_names[5] = "lan1",
-	.port_names[7] = "lan2",
-};
-
-static void __init wnr854t_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(wnr854t_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_eth_init(&wnr854t_eth_data);
-	orion5x_eth_switch_init(&wnr854t_switch_chip_data);
-	orion5x_uart0_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    WNR854T_NOR_BOOT_BASE,
-				    WNR854T_NOR_BOOT_SIZE);
-	platform_device_register(&wnr854t_nor_flash);
-}
-
-static int __init wnr854t_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * Mini-PCI slot.
-	 */
-	if (slot == 7)
-		return gpio_to_irq(4);
-
-	return -1;
-}
-
-static struct hw_pci wnr854t_pci __initdata = {
-	.nr_controllers	= 2,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= wnr854t_pci_map_irq,
-};
-
-static int __init wnr854t_pci_init(void)
-{
-	if (machine_is_wnr854t())
-		pci_common_init(&wnr854t_pci);
-
-	return 0;
-}
-subsys_initcall(wnr854t_pci_init);
-
-MACHINE_START(WNR854T, "Netgear WNR854T")
-	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= wnr854t_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
deleted file mode 100644
index e6a2da6662df..000000000000
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ /dev/null
@@ -1,263 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// arch/arm/mach-orion5x/wrt350n-v2-setup.c
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/platform_data/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "orion5x.h"
-#include "common.h"
-#include "mpp.h"
-
-/*
- * LEDs attached to GPIO
- */
-static struct gpio_led wrt350n_v2_led_pins[] = {
-	{
-		.name		= "wrt350nv2:green:power",
-		.gpio		= 0,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt350nv2:green:security",
-		.gpio		= 1,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt350nv2:orange:power",
-		.gpio		= 5,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt350nv2:green:usb",
-		.gpio		= 6,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt350nv2:green:wireless",
-		.gpio		= 7,
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_led_platform_data wrt350n_v2_led_data = {
-	.leds		= wrt350n_v2_led_pins,
-	.num_leds	= ARRAY_SIZE(wrt350n_v2_led_pins),
-};
-
-static struct platform_device wrt350n_v2_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &wrt350n_v2_led_data,
-	},
-};
-
-/*
- * Buttons attached to GPIO
- */
-static struct gpio_keys_button wrt350n_v2_buttons[] = {
-	{
-		.code		= KEY_RESTART,
-		.gpio		= 3,
-		.desc		= "Reset Button",
-		.active_low	= 1,
-	}, {
-		.code		= KEY_WPS_BUTTON,
-		.gpio		= 2,
-		.desc		= "WPS Button",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data wrt350n_v2_button_data = {
-	.buttons	= wrt350n_v2_buttons,
-	.nbuttons	= ARRAY_SIZE(wrt350n_v2_buttons),
-};
-
-static struct platform_device wrt350n_v2_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &wrt350n_v2_button_data,
-	},
-};
-
-/*
- * General setup
- */
-static unsigned int wrt350n_v2_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* Power LED green (0=on) */
-	MPP1_GPIO,		/* Security LED (0=on) */
-	MPP2_GPIO,		/* Internal Button (0=on) */
-	MPP3_GPIO,		/* Reset Button (0=on) */
-	MPP4_GPIO,		/* PCI int */
-	MPP5_GPIO,		/* Power LED orange (0=on) */
-	MPP6_GPIO,		/* USB LED (0=on) */
-	MPP7_GPIO,		/* Wireless LED (0=on) */
-	MPP8_UNUSED,		/* ??? */
-	MPP9_GIGE,		/* GE_RXERR */
-	MPP10_UNUSED,		/* ??? */
-	MPP11_UNUSED,		/* ??? */
-	MPP12_GIGE,		/* GE_TXD[4] */
-	MPP13_GIGE,		/* GE_TXD[5] */
-	MPP14_GIGE,		/* GE_TXD[6] */
-	MPP15_GIGE,		/* GE_TXD[7] */
-	MPP16_GIGE,		/* GE_RXD[4] */
-	MPP17_GIGE,		/* GE_RXD[5] */
-	MPP18_GIGE,		/* GE_RXD[6] */
-	MPP19_GIGE,		/* GE_RXD[7] */
-	0,
-};
-
-/*
- * 8M NOR flash Device bus boot chip select
- */
-#define WRT350N_V2_NOR_BOOT_BASE	0xf4000000
-#define WRT350N_V2_NOR_BOOT_SIZE	SZ_8M
-
-static struct mtd_partition wrt350n_v2_nor_flash_partitions[] = {
-	{
-		.name		= "kernel",
-		.offset		= 0x00000000,
-		.size		= 0x00760000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x001a0000,
-		.size		= 0x005c0000,
-	}, {
-		.name		= "lang",
-		.offset		= 0x00760000,
-		.size		= 0x00040000,
-	}, {
-		.name		= "nvram",
-		.offset		= 0x007a0000,
-		.size		= 0x00020000,
-	}, {
-		.name		= "u-boot",
-		.offset		= 0x007c0000,
-		.size		= 0x00040000,
-	},
-};
-
-static struct physmap_flash_data wrt350n_v2_nor_flash_data = {
-	.width		= 1,
-	.parts		= wrt350n_v2_nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(wrt350n_v2_nor_flash_partitions),
-};
-
-static struct resource wrt350n_v2_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= WRT350N_V2_NOR_BOOT_BASE,
-	.end		= WRT350N_V2_NOR_BOOT_BASE + WRT350N_V2_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device wrt350n_v2_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &wrt350n_v2_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &wrt350n_v2_nor_flash_resource,
-};
-
-static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
-	.port_names[0]	= "lan2",
-	.port_names[1]	= "lan1",
-	.port_names[2]	= "wan",
-	.port_names[3]	= "cpu",
-	.port_names[5]	= "lan3",
-	.port_names[7]	= "lan4",
-};
-
-static void __init wrt350n_v2_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(wrt350n_v2_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&wrt350n_v2_eth_data);
-	orion5x_eth_switch_init(&wrt350n_v2_switch_chip_data);
-	orion5x_uart0_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    WRT350N_V2_NOR_BOOT_BASE,
-				    WRT350N_V2_NOR_BOOT_SIZE);
-	platform_device_register(&wrt350n_v2_nor_flash);
-	platform_device_register(&wrt350n_v2_leds);
-	platform_device_register(&wrt350n_v2_button_device);
-}
-
-static int __init wrt350n_v2_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * Mini-PCI slot.
-	 */
-	if (slot == 7)
-		return gpio_to_irq(4);
-
-	return -1;
-}
-
-static struct hw_pci wrt350n_v2_pci __initdata = {
-	.nr_controllers	= 2,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= wrt350n_v2_pci_map_irq,
-};
-
-static int __init wrt350n_v2_pci_init(void)
-{
-	if (machine_is_wrt350n_v2())
-		pci_common_init(&wrt350n_v2_pci);
-
-	return 0;
-}
-subsys_initcall(wrt350n_v2_pci_init);
-
-MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= wrt350n_v2_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-oxnas/Kconfig b/arch/arm/mach-oxnas/Kconfig
deleted file mode 100644
index a9ded7079268..000000000000
--- a/arch/arm/mach-oxnas/Kconfig
+++ /dev/null
@@ -1,38 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ARCH_OXNAS
-	bool "Oxford Semiconductor OXNAS Family SoCs"
-	depends on (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN) || ARCH_MULTI_V6
-	select ARCH_HAS_RESET_CONTROLLER
-	select COMMON_CLK_OXNAS
-	select GPIOLIB
-	select MFD_SYSCON
-	select OXNAS_RPS_TIMER
-	select PINCTRL_OXNAS
-	select RESET_CONTROLLER
-	select RESET_OXNAS
-	select VERSATILE_FPGA_IRQ
-	select PINCTRL
-	help
-	  Support for OxNas SoC family developed by Oxford Semiconductor.
-
-if ARCH_OXNAS
-
-config MACH_OX810SE
-	bool "Support OX810SE Based Products"
-	depends on ARCH_MULTI_V5
-	select CPU_ARM926T
-	help
-	  Include Support for the Oxford Semiconductor OX810SE SoC Based Products.
-
-config MACH_OX820
-	bool "Support OX820 Based Products"
-	depends on ARCH_MULTI_V6
-	select ARM_GIC
-	select DMA_CACHE_RWFO if SMP
-	select HAVE_SMP
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	help
-	  Include Support for the Oxford Semiconductor OX820 SoC Based Products.
-
-endif
diff --git a/arch/arm/mach-oxnas/Makefile b/arch/arm/mach-oxnas/Makefile
deleted file mode 100644
index 0e78ecfe6c49..000000000000
--- a/arch/arm/mach-oxnas/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-oxnas/headsmp.S b/arch/arm/mach-oxnas/headsmp.S
deleted file mode 100644
index 9c0f1479f33a..000000000000
--- a/arch/arm/mach-oxnas/headsmp.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
- * Copyright (c) 2003 ARM Limited
- * All Rights Reserved
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-	__INIT
-
-/*
- * OX820 specific entry point for secondary CPUs.
- */
-ENTRY(ox820_secondary_startup)
-	mov r4, #0
-	/* invalidate both caches and branch target cache */
-	mcr p15, 0, r4, c7, c7, 0
-	/*
-	 * we've been released from the holding pen: secondary_stack
-	 * should now contain the SVC stack for this core
-	 */
-	b	secondary_startup
diff --git a/arch/arm/mach-oxnas/platsmp.c b/arch/arm/mach-oxnas/platsmp.c
deleted file mode 100644
index f0a50b9e61df..000000000000
--- a/arch/arm/mach-oxnas/platsmp.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- */
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-#include <asm/smp_plat.h>
-#include <asm/smp_scu.h>
-
-extern void ox820_secondary_startup(void);
-
-static void __iomem *cpu_ctrl;
-static void __iomem *gic_cpu_ctrl;
-
-#define HOLDINGPEN_CPU_OFFSET		0xc8
-#define HOLDINGPEN_LOCATION_OFFSET	0xc4
-
-#define GIC_NCPU_OFFSET(cpu)		(0x100 + (cpu)*0x100)
-#define GIC_CPU_CTRL			0x00
-#define GIC_CPU_CTRL_ENABLE		1
-
-static int __init ox820_boot_secondary(unsigned int cpu,
-		struct task_struct *idle)
-{
-	/*
-	 * Write the address of secondary startup into the
-	 * system-wide flags register. The BootMonitor waits
-	 * until it receives a soft interrupt, and then the
-	 * secondary CPU branches to this address.
-	 */
-	writel(virt_to_phys(ox820_secondary_startup),
-			cpu_ctrl + HOLDINGPEN_LOCATION_OFFSET);
-
-	writel(cpu, cpu_ctrl + HOLDINGPEN_CPU_OFFSET);
-
-	/*
-	 * Enable GIC cpu interface in CPU Interface Control Register
-	 */
-	writel(GIC_CPU_CTRL_ENABLE,
-		gic_cpu_ctrl + GIC_NCPU_OFFSET(cpu) + GIC_CPU_CTRL);
-
-	/*
-	 * Send the secondary CPU a soft interrupt, thereby causing
-	 * the boot monitor to read the system wide flags register,
-	 * and branch to the address found there.
-	 */
-	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-
-	return 0;
-}
-
-static void __init ox820_smp_prepare_cpus(unsigned int max_cpus)
-{
-	struct device_node *np;
-	void __iomem *scu_base;
-
-	np = of_find_compatible_node(NULL, NULL, "arm,arm11mp-scu");
-	scu_base = of_iomap(np, 0);
-	of_node_put(np);
-	if (!scu_base)
-		return;
-
-	/* Remap CPU Interrupt Interface Registers */
-	np = of_find_compatible_node(NULL, NULL, "arm,arm11mp-gic");
-	gic_cpu_ctrl = of_iomap(np, 1);
-	of_node_put(np);
-	if (!gic_cpu_ctrl)
-		goto unmap_scu;
-
-	np = of_find_compatible_node(NULL, NULL, "oxsemi,ox820-sys-ctrl");
-	cpu_ctrl = of_iomap(np, 0);
-	of_node_put(np);
-	if (!cpu_ctrl)
-		goto unmap_scu;
-
-	scu_enable(scu_base);
-	flush_cache_all();
-
-unmap_scu:
-	iounmap(scu_base);
-}
-
-static const struct smp_operations ox820_smp_ops __initconst = {
-	.smp_prepare_cpus	= ox820_smp_prepare_cpus,
-	.smp_boot_secondary	= ox820_boot_secondary,
-};
-
-CPU_METHOD_OF_DECLARE(ox820_smp, "oxsemi,ox820-smp", &ox820_smp_ops);
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index b90d98bae68d..10e472f4fa43 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -16,10 +16,6 @@ menuconfig ARCH_PXA
 
 if ARCH_PXA
 
-menu "Intel PXA2xx/PXA3xx Implementations"
-
-comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
-
 config MACH_PXA25X_DT
 	bool "Support PXA25x platforms from device tree"
 	select PINCTRL
@@ -45,6 +41,8 @@ config MACH_PXA27X_DT
 config MACH_PXA3XX_DT
 	bool "Support PXA3xx platforms from device tree"
 	select CPU_PXA300
+	select CPU_PXA310
+	select CPU_PXA320
 	select PINCTRL
 	select POWER_SUPPLY
 	select PXA3xx
@@ -56,115 +54,7 @@ config MACH_PXA3XX_DT
 
 if ATAGS
 
-config ARCH_LUBBOCK
-	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
-	depends on UNUSED_BOARD_FILES
-	select GPIO_REG
-	select PXA25x
-	select SA1111
-
-config MACH_MAINSTONE
-	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
-	depends on UNUSED_BOARD_FILES
-	select GPIO_REG
-	select PXA27x
-
-config MACH_ZYLONITE
-	bool
-	select PXA3xx
-
-config MACH_ZYLONITE300
-	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA300
-	select CPU_PXA310
-	select MACH_ZYLONITE
-
-config MACH_ZYLONITE320
-	bool "PXA3xx Development Platform (aka Zylonite) PXA320"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA320
-	select MACH_ZYLONITE
-
-config MACH_LITTLETON
-	bool "PXA3xx Form Factor Platform (aka Littleton)"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA300
-	select CPU_PXA310
-	select PXA3xx
-
-config MACH_TAVOREVB
-	bool "PXA930 Evaluation Board (aka TavorEVB)"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA930
-	select CPU_PXA935
-	select PXA3xx
-	select FB
-	select FB_PXA
-
-config MACH_SAAR
-	bool "PXA930 Handheld Platform (aka SAAR)"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA930
-	select CPU_PXA935
-	select PXA3xx
-	select FB
-	select FB_PXA
-
-comment "Third Party Dev Platforms (sorted by vendor name)"
-
-config ARCH_PXA_IDP
-	bool "Accelent Xscale IDP"
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-
-config ARCH_VIPER
-	bool "Arcom/Eurotech VIPER SBC"
-	depends on UNUSED_BOARD_FILES
-	select ARCOM_PCMCIA
-	select I2C_GPIO if I2C=y
-	select ISA
-	select PXA25x
-
-config MACH_ARCOM_ZEUS
-	bool "Arcom/Eurotech ZEUS SBC"
-	depends on UNUSED_BOARD_FILES
-	select ARCOM_PCMCIA
-	select ISA
-	select PXA27x
-
-config MACH_BALLOON3
-	bool "Balloon 3 board"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-
-config MACH_CSB726
-	bool "Enable Cogent CSB726 System On a Module"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a Cogent
-	  CSB726 System On Module.
-
-config CSB726_CSB701
-	bool "Enable support for CSB701 baseboard"
-	depends on UNUSED_BOARD_FILES
-	depends on MACH_CSB726
-
-config MACH_CM_X300
-	bool "CompuLab CM-X300 modules"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA300
-	select CPU_PXA310
-	select PXA3xx
-
-config MACH_CAPC7117
-	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA320
-	select PXA3xx
+comment "Legacy board files"
 
 config ARCH_GUMSTIX
 	bool "Gumstix XScale 255 boards"
@@ -185,307 +75,6 @@ config GUMSTIX_AM300EPD
 
 endchoice
 
-config MACH_XCEP
-	bool "Iskratel Electronics XCEP"
-	depends on UNUSED_BOARD_FILES
-	select MTD
-	select MTD_CFI
-	select MTD_CFI_INTELEXT
-	select MTD_PHYSMAP
-	select PXA25x
-	help
-	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
-	  Tuned for usage in Libera instruments for particle accelerators.
-
-config TRIZEPS_PXA
-	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
-	depends on UNUSED_BOARD_FILES
-
-config MACH_TRIZEPS4
-	bool "Keith und Koep Trizeps4 DIMM-Module"
-	depends on TRIZEPS_PXA
-	select PXA27x
-	select TRIZEPS_PCMCIA
-
-config MACH_TRIZEPS4WL
-	bool "Keith und Koep Trizeps4-WL DIMM-Module"
-	depends on TRIZEPS_PXA
-	select MACH_TRIZEPS4
-	select PXA27x
-	select TRIZEPS_PCMCIA
-
-choice
-	prompt "Select base board for Trizeps module"
-	depends on TRIZEPS_PXA
-
-config MACH_TRIZEPS_CONXS
-	bool "ConXS Eval Board"
-
-config MACH_TRIZEPS_UCONXS
-	bool "uConXS Eval Board"
-
-config MACH_TRIZEPS_ANY
-	bool "another Board"
-
-endchoice
-
-config ARCOM_PCMCIA
-	bool
-	help
-	  Generic option for Arcom Viper/Zeus PCMCIA
-
-config TRIZEPS_PCMCIA
-	bool
-	help
-	  Enable PCMCIA support for Trizeps modules
-
-config MACH_LOGICPD_PXA270
-	bool "LogicPD PXA270 Card Engine Development Platform"
-	depends on UNUSED_BOARD_FILES
-	select PXA27x
-
-config MACH_PCM027
-	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-
-config MACH_PCM990_BASEBOARD
-	bool "PHYTEC PCM-990 development board"
-	depends on UNUSED_BOARD_FILES
-	depends on MACH_PCM027
-
-choice
-	prompt "display on pcm990"
-	depends on MACH_PCM990_BASEBOARD
-
-config PCM990_DISPLAY_SHARP
-	bool "sharp lq084v1dg21 stn display"
-
-config PCM990_DISPLAY_NEC
-	bool "nec nl6448bc20_18d tft display"
-
-config PCM990_DISPLAY_NONE
-	bool "no display"
-
-endchoice
-
-config MACH_COLIBRI
-	bool "Toradex Colibri PXA270"
-	depends on UNUSED_BOARD_FILES
-	select PXA27x
-
-config MACH_COLIBRI_PXA270_INCOME
-	bool "Income s.r.o. PXA270 SBC"
-	depends on UNUSED_BOARD_FILES
-	depends on MACH_COLIBRI
-	select PXA27x
-
-config MACH_COLIBRI300
-	bool "Toradex Colibri PXA300/310"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA300
-	select CPU_PXA310
-	select PXA3xx
-
-config MACH_COLIBRI320
-	bool "Toradex Colibri PXA320"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA320
-	select PXA3xx
-
-config MACH_COLIBRI_EVALBOARD
-	bool "Toradex Colibri Evaluation Carrier Board support"
-	depends on UNUSED_BOARD_FILES
-	depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
-
-config MACH_VPAC270
-	bool "Voipac PXA270"
-	depends on UNUSED_BOARD_FILES
-	select HAVE_PATA_PLATFORM
-	select PXA27x
-	help
-	  PXA270 based Single Board Computer.
-
-comment "End-user Products (sorted by vendor name)"
-
-config MACH_H4700
-	bool "HP iPAQ hx4700"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-
-config MACH_H5000
-	bool "HP iPAQ h5000"
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-
-config MACH_HIMALAYA
-	bool "HTC Himalaya Support"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA26x
-
-config MACH_MAGICIAN
-	bool "Enable HTC Magician Support"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-
-config MACH_MIOA701
-	bool "Mitac Mio A701 Support"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a
-	  MIO A701. Currently there is only basic support
-	  for this PDA.
-
-config PXA_EZX
-	bool "Motorola EZX Platform"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-
-config MACH_EZX_A780
-	bool "Motorola EZX A780"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E680
-	bool "Motorola EZX E680"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_A1200
-	bool "Motorola EZX A1200"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_A910
-	bool "Motorola EZX A910"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E6
-	bool "Motorola EZX E6"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E2
-	bool "Motorola EZX E2"
-	default y
-	depends on PXA_EZX
-
-config MACH_MP900C
-	bool "Nec Mobilepro 900/c"
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-
-config ARCH_PXA_PALM
-	bool "PXA based Palm PDAs"
-	depends on UNUSED_BOARD_FILES
-
-config MACH_PALM27X
-	bool
-
-config MACH_PALMTE2
-	bool "Palm Tungsten|E2"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|E2
-	  handheld computer.
-
-config MACH_PALMTC
-	bool "Palm Tungsten|C"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|C
-	  handheld computer.
-
-config MACH_PALMT5
-	bool "Palm Tungsten|T5"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
-	  handheld computer.
-
-config MACH_PALMTX
-	bool "Palm T|X"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a Palm T|X
-	  handheld computer.
-
-config MACH_PALMZ72
-	bool "Palm Zire 72"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on Palm Zire 72
-	  handheld computer.
-
-config MACH_PALMLD
-	bool "Palm LifeDrive"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a Palm LifeDrive
-	  handheld computer.
-
-config PALM_TREO
-	bool
-	depends on ARCH_PXA_PALM
-
-config MACH_CENTRO
-	bool "Palm Centro 685 (GSM)"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PALM_TREO
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
-	  smartphone.
-
-config MACH_TREO680
-	bool "Palm Treo 680"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PALM_TREO
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on Palm Treo 680
-	  smartphone.
-
 config PXA_SHARPSL
 	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
 	select SHARP_PARAM
@@ -505,34 +94,6 @@ config PXA_SHARPSL_DETECT_MACH_ID
 	  the Zaurus machine ID at run-time. For latest kexec-based
 	  boot loader, this is not necessary.
 
-config MACH_POODLE
-	bool "Enable Sharp SL-5600 (Poodle) Support"
-	depends on PXA_SHARPSL
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-	select SHARP_LOCOMO
-
-config MACH_CORGI
-	bool "Enable Sharp SL-C700 (Corgi) Support"
-	depends on PXA_SHARPSL
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-	bool "Enable Sharp SL-C750 (Shepherd) Support"
-	depends on PXA_SHARPSL
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-	bool "Enable Sharp SL-C760 (Husky) Support"
-	depends on PXA_SHARPSL
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-	select PXA_SHARP_C7xx
-
 config MACH_AKITA
 	bool "Enable Sharp SL-1000 (Akita) Support"
 	depends on PXA_SHARPSL
@@ -554,98 +115,7 @@ config MACH_BORZOI
 	select PXA27x
 	select PXA_SHARP_Cxx00
 
-config MACH_TOSA
-	bool "Enable Sharp SL-6000x (Tosa) Support"
-	depends on UNUSED_BOARD_FILES
-	depends on PXA_SHARPSL
-	select PXA25x
-
-config TOSA_BT
-	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
-	depends on MACH_TOSA && NET
-	select RFKILL
-	help
-	  This is a simple driver that is able to control
-	  the state of built in bluetooth chip on tosa.
-
-config TOSA_USE_EXT_KEYCODES
-	bool "Tosa keyboard: use extended keycodes"
-	depends on MACH_TOSA
-	help
-	  Say Y here to enable the tosa keyboard driver to generate extended
-	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
-	  by either console keyboard driver or by Kdrive keybd driver.
-
-	  Say Y only if you know, what you are doing!
-
-config MACH_ICONTROL
-	bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA320
-	select PXA3xx
-
-config ARCH_PXA_ESERIES
-	bool "PXA based Toshiba e-series PDAs"
-	depends on UNUSED_BOARD_FILES
-	select FB_W100
-	select FB
-	select PXA25x
-
-config MACH_E330
-	bool "Toshiba e330"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e330 family PDA.
-
-config MACH_E350
-	bool "Toshiba e350"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e350 family PDA.
-
-config MACH_E740
-	bool "Toshiba e740"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e740 family PDA.
-
-config MACH_E750
-	bool "Toshiba e750"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e750 family PDA.
-
-config MACH_E400
-	bool "Toshiba e400"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e400 family PDA.
-
-config MACH_E800
-	bool "Toshiba e800"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e800 family PDA.
-
-config MACH_ZIPIT2
-	bool "Zipit Z2 Handheld"
-	depends on UNUSED_BOARD_FILES
-	select PXA27x
-
 endif # ATAGS
-endmenu
 
 config PXA25x
 	bool
@@ -659,12 +129,6 @@ config PXA27x
 	help
 	  Select code specific to PXA27x variants
 
-config CPU_PXA26x
-	bool
-	select PXA25x
-	help
-	  Select code specific to PXA26x (codename Dalhart)
-
 config PXA3xx
 	bool
 	select CPU_XSC3
@@ -680,7 +144,6 @@ config CPU_PXA300
 config CPU_PXA310
 	bool
 	select CPU_PXA300
-	select PXA310_ULPI if USB_ULPI
 	help
 	  PXA310 (codename Monahans-LV)
 
@@ -690,24 +153,6 @@ config CPU_PXA320
 	help
 	  PXA320 (codename Monahans-P)
 
-config CPU_PXA930
-	bool
-	select PXA3xx
-	help
-	  PXA930 (codename Tavor-P)
-
-config CPU_PXA935
-	bool
-	select CPU_PXA930
-	help
-	  PXA935 (codename Tavor-P65)
-
-config PXA_SHARP_C7xx
-	bool
-	select SHARPSL_PM
-	help
-	  Enable support for all Sharp C7xx models
-
 config PXA_SHARP_Cxx00
 	bool
 	select SHARPSL_PM
@@ -726,16 +171,4 @@ config SHARPSL_PM_MAX1111
 	select SPI
 	select SPI_MASTER
 
-config PXA310_ULPI
-	bool
-
-config PXA_SYSTEMS_CPLDS
-	tristate "Motherboard cplds"
-	default ARCH_LUBBOCK || MACH_MAINSTONE
-	help
-	  This driver supports the Lubbock and Mainstone multifunction chip
-	  found on the pxa25x development platform system (Lubbock) and pxa27x
-	  development platform system (Mainstone). This IO board supports the
-	  interrupts handling, ethernet controller, flash chips, etc ...
-
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 0aec36e67dc1..faccdd356482 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -12,10 +12,9 @@ obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 # SoC-specific code
 obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa2xx.o pxa25x.o
 obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
-obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
 # NOTE: keep the order of boards in accordance to their order in Kconfig
 
@@ -24,66 +23,10 @@ obj-$(CONFIG_MACH_PXA25X_DT)	+= pxa-dt.o
 obj-$(CONFIG_MACH_PXA27X_DT)	+= pxa-dt.o
 obj-$(CONFIG_MACH_PXA3XX_DT)	+= pxa-dt.o
 
-# Intel/Marvell Dev Platforms
-obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
-obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
-obj-$(CONFIG_MACH_ZYLONITE300)	+= zylonite.o zylonite_pxa300.o
-obj-$(CONFIG_MACH_ZYLONITE320)	+= zylonite.o zylonite_pxa320.o
-obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
-obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
-obj-$(CONFIG_MACH_SAAR)		+= saar.o
-
 # 3rd Party Dev Platforms
-obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
-obj-$(CONFIG_ARCH_VIPER)	+= viper.o
-obj-$(CONFIG_MACH_ARCOM_ZEUS)	+= zeus.o
-obj-$(CONFIG_ARCOM_PCMCIA)	+= viper-pcmcia.o
-obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o balloon3-pcmcia.o
-obj-$(CONFIG_MACH_CSB726)	+= csb726.o
-obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
-obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
-obj-$(CONFIG_MACH_CAPC7117)     += capc7117.o mxm8x10.o
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
 obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
 obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
-obj-$(CONFIG_MACH_XCEP)         += xcep.o
-obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
-obj-$(CONFIG_TRIZEPS_PCMCIA)	+= trizeps4-pcmcia.o
-obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
-obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
-obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
-obj-$(CONFIG_MACH_COLIBRI)		+= colibri-pxa270.o colibri-pcmcia.o
-obj-$(CONFIG_MACH_COLIBRI_EVALBOARD)	+= colibri-evalboard.o
-obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME)	+= colibri-pxa270-income.o
-obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
-obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o colibri-pcmcia.o
-obj-$(CONFIG_MACH_VPAC270)	+= vpac270.o vpac270-pcmcia.o
 
 # End-user Products
-obj-$(CONFIG_MACH_H4700)	+= hx4700.o
-obj-$(CONFIG_MACH_H4700)	+= hx4700-pcmcia.o
-obj-$(CONFIG_MACH_H5000)	+= h5000.o
-obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
-obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
-obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
-obj-$(CONFIG_PXA_EZX)           += ezx.o
-obj-$(CONFIG_MACH_MP900C)	+= mp900.o
-obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
-obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o palmtc-pcmcia.o
-obj-$(CONFIG_MACH_PALM27X)	+= palm27x.o
-obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
-obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o palmtx-pcmcia.o
-obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
-obj-$(CONFIG_MACH_PALMLD)	+= palmld.o palmld-pcmcia.o
-obj-$(CONFIG_PALM_TREO)		+= palmtreo.o
-obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
-obj-$(CONFIG_MACH_POODLE)	+= poodle.o
-obj-$(CONFIG_MACH_TOSA)		+= tosa.o
-obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
-obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
-obj-$(CONFIG_MACH_E740)		+= e740-pcmcia.o
-obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
-
-obj-$(CONFIG_PXA_SYSTEMS_CPLDS)	+= pxa_cplds_irqs.o
-obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/arch/arm/mach-pxa/balloon3-pcmcia.c b/arch/arm/mach-pxa/balloon3-pcmcia.c
deleted file mode 100644
index 6a27b76cc603..000000000000
--- a/arch/arm/mach-pxa/balloon3-pcmcia.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_balloon3.c
- *
- * Balloon3 PCMCIA specific routines.
- *
- *  Author:	Nick Bane
- *  Created:	June, 2006
- *  Copyright:	Toby Churchill Ltd
- *  Derived from pxa2xx_mainstone.c, by Nico Pitre
- *
- * Various modification by Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include "balloon3.h"
-
-#include <asm/mach-types.h>
-
-#include <pcmcia/soc_common.h>
-
-static int balloon3_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	uint16_t ver;
-
-	ver = __raw_readw(BALLOON3_FPGA_VER);
-	if (ver < 0x4f08)
-		pr_warn("The FPGA code, version 0x%04x, is too old. "
-			"PCMCIA/CF support might be broken in this version!",
-			ver);
-
-	skt->socket.pci_irq = BALLOON3_BP_CF_NRDY_IRQ;
-	skt->stat[SOC_STAT_CD].gpio = BALLOON3_GPIO_S0_CD;
-	skt->stat[SOC_STAT_CD].name = "PCMCIA0 CD";
-	skt->stat[SOC_STAT_BVD1].irq = BALLOON3_BP_NSTSCHG_IRQ;
-	skt->stat[SOC_STAT_BVD1].name = "PCMCIA0 STSCHG";
-
-	return 0;
-}
-
-static unsigned long balloon3_pcmcia_status[2] = {
-	BALLOON3_CF_nSTSCHG_BVD1,
-	BALLOON3_CF_nSTSCHG_BVD1
-};
-
-static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-				    struct pcmcia_state *state)
-{
-	uint16_t status;
-	int flip;
-
-	/* This actually reads the STATUS register */
-	status = __raw_readw(BALLOON3_CF_STATUS_REG);
-	flip = (status ^ balloon3_pcmcia_status[skt->nr])
-		& BALLOON3_CF_nSTSCHG_BVD1;
-	/*
-	 * Workaround for STSCHG which can't be deasserted:
-	 * We therefore disable/enable corresponding IRQs
-	 * as needed to avoid IRQ locks.
-	 */
-	if (flip) {
-		balloon3_pcmcia_status[skt->nr] = status;
-		if (status & BALLOON3_CF_nSTSCHG_BVD1)
-			enable_irq(BALLOON3_BP_NSTSCHG_IRQ);
-		else
-			disable_irq(BALLOON3_BP_NSTSCHG_IRQ);
-	}
-
-	state->ready	= !!(status & BALLOON3_CF_nIRQ);
-	state->bvd1	= !!(status & BALLOON3_CF_nSTSCHG_BVD1);
-	state->bvd2	= 0;	/* not available */
-	state->vs_3v	= 1;	/* Always true its a CF card */
-	state->vs_Xv	= 0;	/* not available */
-}
-
-static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				       const socket_state_t *state)
-{
-	__raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG +
-			((state->flags & SS_RESET) ?
-			BALLOON3_FPGA_SETnCLR : 0));
-	return 0;
-}
-
-static struct pcmcia_low_level balloon3_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-	.hw_init		= balloon3_pcmcia_hw_init,
-	.socket_state		= balloon3_pcmcia_socket_state,
-	.configure_socket	= balloon3_pcmcia_configure_socket,
-	.first			= 0,
-	.nr			= 1,
-};
-
-static struct platform_device *balloon3_pcmcia_device;
-
-static int __init balloon3_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_balloon3())
-		return -ENODEV;
-
-	balloon3_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!balloon3_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(balloon3_pcmcia_device,
-			&balloon3_pcmcia_ops, sizeof(balloon3_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(balloon3_pcmcia_device);
-
-	if (ret)
-		platform_device_put(balloon3_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit balloon3_pcmcia_exit(void)
-{
-	platform_device_unregister(balloon3_pcmcia_device);
-}
-
-module_init(balloon3_pcmcia_init);
-module_exit(balloon3_pcmcia_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Nick Bane <nick@cecomputing.co.uk>");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_DESCRIPTION("Balloon3 board CF/PCMCIA driver");
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
deleted file mode 100644
index 896d47d9a8dc..000000000000
--- a/arch/arm/mach-pxa/balloon3.c
+++ /dev/null
@@ -1,821 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/balloon3.c
- *
- *  Support for Balloonboard.org Balloon3 board.
- *
- *  Author:	Nick Bane, Wookey, Jonathan McDowell
- *  Created:	June, 2006
- *  Copyright:	Toby Churchill Ltd
- *  Derived from mainstone.c, by Nico Pitre
- */
-
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/ioport.h>
-#include <linux/ucb1400.h>
-#include <linux/mtd/mtd.h>
-#include <linux/types.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/physmap.h>
-#include <linux/regulator/max1586.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include "pxa27x.h"
-#include "balloon3.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include "udc.h"
-#include "pxa27x-udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long balloon3_pin_config[] __initdata = {
-	/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* Reset, configured as GPIO wakeup source */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-};
-
-/******************************************************************************
- * Compatibility: Parameter parsing
- ******************************************************************************/
-static unsigned long balloon3_irq_enabled;
-
-static unsigned long balloon3_features_present =
-		(1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
-		(1 << BALLOON3_FEATURE_AUDIO) |
-		(1 << BALLOON3_FEATURE_TOPPOLY);
-
-int balloon3_has(enum balloon3_features feature)
-{
-	return (balloon3_features_present & (1 << feature)) ? 1 : 0;
-}
-EXPORT_SYMBOL_GPL(balloon3_has);
-
-int __init parse_balloon3_features(char *arg)
-{
-	if (!arg)
-		return 0;
-
-	return kstrtoul(arg, 0, &balloon3_features_present);
-}
-early_param("balloon3_features", parse_balloon3_features);
-
-/******************************************************************************
- * Compact Flash slot
- ******************************************************************************/
-#if	defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
-static unsigned long balloon3_cf_pin_config[] __initdata = {
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-};
-
-static void __init balloon3_cf_init(void)
-{
-	if (!balloon3_has(BALLOON3_FEATURE_CF))
-		return;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_cf_pin_config));
-}
-#else
-static inline void balloon3_cf_init(void) {}
-#endif
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition balloon3_nor_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data balloon3_flash_data[] = {
-	{
-		.width		= 2,	/* bankwidth in bytes */
-		.parts		= balloon3_nor_partitions,
-		.nr_parts	= ARRAY_SIZE(balloon3_nor_partitions)
-	}
-};
-
-static struct resource balloon3_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device balloon3_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &balloon3_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = balloon3_flash_data,
-	},
-};
-static void __init balloon3_nor_init(void)
-{
-	platform_device_register(&balloon3_flash);
-}
-#else
-static inline void balloon3_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Audio and Touchscreen
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static unsigned long balloon3_ac97_pin_config[] __initdata = {
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO113_AC97_nRESET,
-	GPIO95_GPIO,
-};
-
-static struct ucb1400_pdata vpac270_ucb1400_pdata = {
-	.irq		= PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ),
-};
-
-
-static struct platform_device balloon3_ucb1400_device = {
-	.name		= "ucb1400_core",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &vpac270_ucb1400_pdata,
-	},
-};
-
-static void __init balloon3_ts_init(void)
-{
-	if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
-		return;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
-	pxa_set_ac97_info(NULL);
-	platform_device_register(&balloon3_ucb1400_device);
-}
-#else
-static inline void balloon3_ts_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static unsigned long balloon3_lcd_pin_config[] __initdata = {
-	GPIOxx_LCD_TFT_16BPP,
-	GPIO99_GPIO,
-};
-
-static struct pxafb_mode_info balloon3_lcd_modes[] = {
-	{
-		.pixclock		= 38000,
-		.xres			= 480,
-		.yres			= 640,
-		.bpp			= 16,
-		.hsync_len		= 8,
-		.left_margin		= 8,
-		.right_margin		= 8,
-		.vsync_len		= 2,
-		.upper_margin		= 4,
-		.lower_margin		= 5,
-		.sync			= 0,
-	},
-};
-
-static struct pxafb_mach_info balloon3_lcd_screen = {
-	.modes			= balloon3_lcd_modes,
-	.num_modes		= ARRAY_SIZE(balloon3_lcd_modes),
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void balloon3_backlight_power(int on)
-{
-	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
-}
-
-static void __init balloon3_lcd_init(void)
-{
-	int ret;
-
-	if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
-		return;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
-
-	ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
-	if (ret) {
-		pr_err("Requesting BKL-ON GPIO failed!\n");
-		goto err;
-	}
-
-	ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
-	if (ret) {
-		pr_err("Setting BKL-ON GPIO direction failed!\n");
-		goto err2;
-	}
-
-	balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
-	pxa_set_fb_info(NULL, &balloon3_lcd_screen);
-	return;
-
-err2:
-	gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT);
-err:
-	return;
-}
-#else
-static inline void balloon3_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static unsigned long balloon3_mmc_pin_config[] __initdata = {
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-};
-
-static struct pxamci_platform_data balloon3_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-static void __init balloon3_mmc_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
-	pxa_set_mci_info(&balloon3_mci_platform_data);
-}
-#else
-static inline void balloon3_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Gadget
- ******************************************************************************/
-#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static void balloon3_udc_command(int cmd)
-{
-	if (cmd == PXA2XX_UDC_CMD_CONNECT)
-		UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
-	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
-		UP2OCR &= ~UP2OCR_DPPUE;
-}
-
-static int balloon3_udc_is_connected(void)
-{
-	return 1;
-}
-
-static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
-	.udc_command		= balloon3_udc_command,
-	.udc_is_connected	= balloon3_udc_is_connected,
-	.gpio_pullup		= -1,
-};
-
-static void __init balloon3_udc_init(void)
-{
-	pxa_set_udc_info(&balloon3_udc_info);
-}
-#else
-static inline void balloon3_udc_init(void) {}
-#endif
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data balloon3_ficp_platform_data = {
-	.transceiver_cap	= IR_FIRMODE | IR_SIRMODE | IR_OFF,
-};
-
-static void __init balloon3_irda_init(void)
-{
-	pxa_set_ficp_info(&balloon3_ficp_platform_data);
-}
-#else
-static inline void balloon3_irda_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static unsigned long balloon3_uhc_pin_config[] __initdata = {
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-};
-
-static struct pxaohci_platform_data balloon3_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init balloon3_uhc_init(void)
-{
-	if (!balloon3_has(BALLOON3_FEATURE_OHCI))
-		return;
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_uhc_pin_config));
-	pxa_set_ohci_info(&balloon3_ohci_info);
-}
-#else
-static inline void balloon3_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static unsigned long balloon3_led_pin_config[] __initdata = {
-	GPIO9_GPIO,	/* NAND activity LED */
-	GPIO10_GPIO,	/* Heartbeat LED */
-};
-
-struct gpio_led balloon3_gpio_leds[] = {
-	{
-		.name			= "balloon3:green:idle",
-		.default_trigger	= "heartbeat",
-		.gpio			= BALLOON3_GPIO_LED_IDLE,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:green:nand",
-		.default_trigger	= "nand-disk",
-		.gpio			= BALLOON3_GPIO_LED_NAND,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data balloon3_gpio_led_info = {
-	.leds		= balloon3_gpio_leds,
-	.num_leds	= ARRAY_SIZE(balloon3_gpio_leds),
-};
-
-static struct platform_device balloon3_leds = {
-	.name	= "leds-gpio",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &balloon3_gpio_led_info,
-	}
-};
-
-struct gpio_led balloon3_pcf_gpio_leds[] = {
-	{
-		.name			= "balloon3:green:led0",
-		.gpio			= BALLOON3_PCF_GPIO_LED0,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:green:led1",
-		.gpio			= BALLOON3_PCF_GPIO_LED1,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led2",
-		.gpio			= BALLOON3_PCF_GPIO_LED2,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led3",
-		.gpio			= BALLOON3_PCF_GPIO_LED3,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led4",
-		.gpio			= BALLOON3_PCF_GPIO_LED4,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led5",
-		.gpio			= BALLOON3_PCF_GPIO_LED5,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:red:led6",
-		.gpio			= BALLOON3_PCF_GPIO_LED6,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:red:led7",
-		.gpio			= BALLOON3_PCF_GPIO_LED7,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = {
-	.leds		= balloon3_pcf_gpio_leds,
-	.num_leds	= ARRAY_SIZE(balloon3_pcf_gpio_leds),
-};
-
-static struct platform_device balloon3_pcf_leds = {
-	.name	= "leds-gpio",
-	.id	= 1,
-	.dev	= {
-		.platform_data	= &balloon3_pcf_gpio_led_info,
-	}
-};
-
-static void __init balloon3_leds_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_led_pin_config));
-	platform_device_register(&balloon3_leds);
-	platform_device_register(&balloon3_pcf_leds);
-}
-#else
-static inline void balloon3_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * FPGA IRQ
- ******************************************************************************/
-static void balloon3_mask_irq(struct irq_data *d)
-{
-	int balloon3_irq = (d->irq - BALLOON3_IRQ(0));
-	balloon3_irq_enabled &= ~(1 << balloon3_irq);
-	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
-}
-
-static void balloon3_unmask_irq(struct irq_data *d)
-{
-	int balloon3_irq = (d->irq - BALLOON3_IRQ(0));
-	balloon3_irq_enabled |= (1 << balloon3_irq);
-	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
-}
-
-static struct irq_chip balloon3_irq_chip = {
-	.name		= "FPGA",
-	.irq_ack	= balloon3_mask_irq,
-	.irq_mask	= balloon3_mask_irq,
-	.irq_unmask	= balloon3_unmask_irq,
-};
-
-static void balloon3_irq_handler(struct irq_desc *desc)
-{
-	unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
-					balloon3_irq_enabled;
-	do {
-		struct irq_data *d = irq_desc_get_irq_data(desc);
-		struct irq_chip *chip = irq_desc_get_chip(desc);
-		unsigned int irq;
-
-		/* clear useless edge notification */
-		if (chip->irq_ack)
-			chip->irq_ack(d);
-
-		while (pending) {
-			irq = BALLOON3_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-			pending &= pending - 1;
-		}
-		pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
-				balloon3_irq_enabled;
-	} while (pending);
-}
-
-static void __init balloon3_init_irq(void)
-{
-	int irq;
-
-	pxa27x_init_irq();
-	/* setup extra Balloon3 irqs */
-	for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
-		irq_set_chip_and_handler(irq, &balloon3_irq_chip,
-					 handle_level_irq);
-		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
-
-	irq_set_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
-	irq_set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
-
-	pr_debug("%s: chained handler installed - irq %d automatically "
-		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
-}
-
-/******************************************************************************
- * GPIO expander
- ******************************************************************************/
-#if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE)
-static struct pcf857x_platform_data balloon3_pcf857x_pdata = {
-	.gpio_base	= BALLOON3_PCF_GPIO_BASE,
-	.n_latch	= 0,
-	.setup		= NULL,
-	.teardown	= NULL,
-	.context	= NULL,
-};
-
-static struct i2c_board_info __initdata balloon3_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("pcf8574a", 0x38),
-		.platform_data	= &balloon3_pcf857x_pdata,
-	},
-};
-
-static void __init balloon3_i2c_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs));
-}
-#else
-static inline void balloon3_i2c_init(void) {}
-#endif
-
-/******************************************************************************
- * NAND
- ******************************************************************************/
-#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static void balloon3_nand_cmd_ctl(struct nand_chip *this, int cmd,
-				  unsigned int ctrl)
-{
-	uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if (ctrl & NAND_CLE)
-			balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLCLE;
-		else
-			balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLCLE;
-
-		if (ctrl & NAND_ALE)
-			balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLALE;
-		else
-			balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLALE;
-
-		if (balloon3_ctl_clr)
-			__raw_writel(balloon3_ctl_clr,
-				BALLOON3_NAND_CONTROL_REG);
-		if (balloon3_ctl_set)
-			__raw_writel(balloon3_ctl_set,
-				BALLOON3_NAND_CONTROL_REG +
-				BALLOON3_FPGA_SETnCLR);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->legacy.IO_ADDR_W);
-}
-
-static void balloon3_nand_select_chip(struct nand_chip *this, int chip)
-{
-	if (chip < 0 || chip > 3)
-		return;
-
-	/* Assert all nCE lines */
-	__raw_writew(
-		BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
-		BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3,
-		BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
-
-	/* Deassert correct nCE line */
-	__raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip,
-		BALLOON3_NAND_CONTROL_REG);
-}
-
-static int balloon3_nand_dev_ready(struct nand_chip *this)
-{
-	return __raw_readl(BALLOON3_NAND_STAT_REG) & BALLOON3_NAND_STAT_RNB;
-}
-
-static int balloon3_nand_probe(struct platform_device *pdev)
-{
-	uint16_t ver;
-	int ret;
-
-	__raw_writew(BALLOON3_NAND_CONTROL2_16BIT,
-		BALLOON3_NAND_CONTROL2_REG + BALLOON3_FPGA_SETnCLR);
-
-	ver = __raw_readw(BALLOON3_FPGA_VER);
-	if (ver < 0x4f08)
-		pr_warn("The FPGA code, version 0x%04x, is too old. "
-			"NAND support might be broken in this version!", ver);
-
-	/* Power up the NAND chips */
-	ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND");
-	if (ret)
-		goto err1;
-
-	ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1);
-	if (ret)
-		goto err2;
-
-	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
-
-	/* Deassert all nCE lines and write protect line */
-	__raw_writel(
-		BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
-		BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
-		BALLOON3_NAND_CONTROL_FLWP,
-		BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
-	return 0;
-
-err2:
-	gpio_free(BALLOON3_GPIO_RUN_NAND);
-err1:
-	return ret;
-}
-
-static void balloon3_nand_remove(struct platform_device *pdev)
-{
-	/* Power down the NAND chips */
-	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0);
-	gpio_free(BALLOON3_GPIO_RUN_NAND);
-}
-
-static struct mtd_partition balloon3_partition_info[] = {
-	[0] = {
-		.name	= "Boot",
-		.offset	= 0,
-		.size	= SZ_4M,
-	},
-	[1] = {
-		.name	= "RootFS",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL
-	},
-};
-
-struct platform_nand_data balloon3_nand_pdata = {
-	.chip = {
-		.nr_chips	= 4,
-		.chip_offset	= 0,
-		.nr_partitions	= ARRAY_SIZE(balloon3_partition_info),
-		.partitions	= balloon3_partition_info,
-		.chip_delay	= 50,
-	},
-	.ctrl = {
-		.dev_ready	= balloon3_nand_dev_ready,
-		.select_chip	= balloon3_nand_select_chip,
-		.cmd_ctrl	= balloon3_nand_cmd_ctl,
-		.probe		= balloon3_nand_probe,
-		.remove		= balloon3_nand_remove,
-	},
-};
-
-static struct resource balloon3_nand_resource[] = {
-	[0] = {
-		.start = BALLOON3_NAND_BASE,
-		.end   = BALLOON3_NAND_BASE + 0x4,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device balloon3_nand = {
-	.name		= "gen_nand",
-	.num_resources	= ARRAY_SIZE(balloon3_nand_resource),
-	.resource	= balloon3_nand_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data = &balloon3_nand_pdata,
-	}
-};
-
-static void __init balloon3_nand_init(void)
-{
-	platform_device_register(&balloon3_nand);
-}
-#else
-static inline void balloon3_nand_init(void) {}
-#endif
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-static struct regulator_consumer_supply balloon3_max1587a_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data balloon3_max1587a_v3_info = {
-	.constraints = {
-		.name		= "vcc_core range",
-		.min_uV		= 900000,
-		.max_uV		= 1705000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.consumer_supplies	= balloon3_max1587a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(balloon3_max1587a_consumers),
-};
-
-static struct max1586_subdev_data balloon3_max1587a_subdevs[] = {
-	{
-		.name		= "vcc_core",
-		.id		= MAX1586_V3,
-		.platform_data	= &balloon3_max1587a_v3_info,
-	}
-};
-
-static struct max1586_platform_data balloon3_max1587a_info = {
-	.subdevs     = balloon3_max1587a_subdevs,
-	.num_subdevs = ARRAY_SIZE(balloon3_max1587a_subdevs),
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata balloon3_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data	= &balloon3_max1587a_info,
-	},
-};
-
-static void __init balloon3_pmic_init(void)
-{
-	pxa27x_set_i2c_power_info(NULL);
-	i2c_register_board_info(1, ARRAY_AND_SIZE(balloon3_pi2c_board_info));
-}
-#else
-static inline void balloon3_pmic_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init balloon3_init(void)
-{
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	balloon3_i2c_init();
-	balloon3_irda_init();
-	balloon3_lcd_init();
-	balloon3_leds_init();
-	balloon3_mmc_init();
-	balloon3_nand_init();
-	balloon3_nor_init();
-	balloon3_pmic_init();
-	balloon3_ts_init();
-	balloon3_udc_init();
-	balloon3_uhc_init();
-	balloon3_cf_init();
-}
-
-static struct map_desc balloon3_io_desc[] __initdata = {
-	{	/* CPLD/FPGA */
-		.virtual	= (unsigned long)BALLOON3_FPGA_VIRT,
-		.pfn		= __phys_to_pfn(BALLOON3_FPGA_PHYS),
-		.length		= BALLOON3_FPGA_LENGTH,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init balloon3_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
-}
-
-MACHINE_START(BALLOON3, "Balloon3")
-	/* Maintainer: Nick Bane. */
-	.map_io		= balloon3_map_io,
-	.nr_irqs	= BALLOON3_NR_IRQS,
-	.init_irq	= balloon3_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= balloon3_init,
-	.atag_offset	= 0x100,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/balloon3.h b/arch/arm/mach-pxa/balloon3.h
deleted file mode 100644
index 04f3639c4082..000000000000
--- a/arch/arm/mach-pxa/balloon3.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  linux/include/asm-arm/arch-pxa/balloon3.h
- *
- *  Authors:	Nick Bane and Wookey
- *  Created:	Oct, 2005
- *  Copyright:	Toby Churchill Ltd
- *  Cribbed from mainstone.c, by Nicholas Pitre
- */
-
-#ifndef ASM_ARCH_BALLOON3_H
-#define ASM_ARCH_BALLOON3_H
-
-#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
-
-enum balloon3_features {
-	BALLOON3_FEATURE_OHCI,
-	BALLOON3_FEATURE_MMC,
-	BALLOON3_FEATURE_CF,
-	BALLOON3_FEATURE_AUDIO,
-	BALLOON3_FEATURE_TOPPOLY,
-};
-
-#define BALLOON3_FPGA_PHYS	PXA_CS4_PHYS
-#define BALLOON3_FPGA_VIRT	IOMEM(0xf1000000)	/* as per balloon2 */
-#define BALLOON3_FPGA_LENGTH	0x01000000
-
-#define	BALLOON3_FPGA_SETnCLR		(0x1000)
-
-/* FPGA / CPLD registers for CF socket */
-#define	BALLOON3_CF_STATUS_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
-#define	BALLOON3_CF_CONTROL_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
-/* FPGA / CPLD version register */
-#define	BALLOON3_FPGA_VER		(BALLOON3_FPGA_VIRT + 0x00e0001c)
-/* FPGA / CPLD registers for NAND flash */
-#define	BALLOON3_NAND_BASE		(PXA_CS4_PHYS + 0x00e00000)
-#define	BALLOON3_NAND_IO_REG		(BALLOON3_FPGA_VIRT + 0x00e00000)
-#define	BALLOON3_NAND_CONTROL2_REG	(BALLOON3_FPGA_VIRT + 0x00e00010)
-#define	BALLOON3_NAND_STAT_REG		(BALLOON3_FPGA_VIRT + 0x00e00014)
-#define	BALLOON3_NAND_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e00014)
-
-/* fpga/cpld interrupt control register */
-#define BALLOON3_INT_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e0000C)
-#define BALLOON3_VERSION_REG		(BALLOON3_FPGA_VIRT + 0x00e0001c)
-
-#define BALLOON3_SAMOSA_ADDR_REG	(BALLOON3_FPGA_VIRT + 0x00c00000)
-#define BALLOON3_SAMOSA_DATA_REG	(BALLOON3_FPGA_VIRT + 0x00c00004)
-#define BALLOON3_SAMOSA_STATUS_REG	(BALLOON3_FPGA_VIRT + 0x00c0001c)
-
-/* CF Status Register bits (read-only) bits */
-#define BALLOON3_CF_nIRQ		(1 << 0)
-#define BALLOON3_CF_nSTSCHG_BVD1	(1 << 1)
-
-/* CF Control Set Register bits / CF Control Clear Register bits (write-only) */
-#define BALLOON3_CF_RESET		(1 << 0)
-#define BALLOON3_CF_ENABLE		(1 << 1)
-#define BALLOON3_CF_ADD_ENABLE		(1 << 2)
-
-/* CF Interrupt sources */
-#define BALLOON3_BP_CF_NRDY_IRQ		BALLOON3_IRQ(0)
-#define BALLOON3_BP_NSTSCHG_IRQ		BALLOON3_IRQ(1)
-
-/* NAND Control register */
-#define	BALLOON3_NAND_CONTROL_FLWP	(1 << 7)
-#define	BALLOON3_NAND_CONTROL_FLSE	(1 << 6)
-#define	BALLOON3_NAND_CONTROL_FLCE3	(1 << 5)
-#define	BALLOON3_NAND_CONTROL_FLCE2	(1 << 4)
-#define	BALLOON3_NAND_CONTROL_FLCE1	(1 << 3)
-#define	BALLOON3_NAND_CONTROL_FLCE0	(1 << 2)
-#define	BALLOON3_NAND_CONTROL_FLALE	(1 << 1)
-#define	BALLOON3_NAND_CONTROL_FLCLE	(1 << 0)
-
-/* NAND Status register */
-#define	BALLOON3_NAND_STAT_RNB		(1 << 0)
-
-/* NAND Control2 register */
-#define	BALLOON3_NAND_CONTROL2_16BIT	(1 << 0)
-
-/* GPIOs for irqs */
-#define BALLOON3_GPIO_AUX_NIRQ		(94)
-#define BALLOON3_GPIO_CODEC_IRQ		(95)
-
-/* Timer and Idle LED locations */
-#define BALLOON3_GPIO_LED_NAND		(9)
-#define BALLOON3_GPIO_LED_IDLE		(10)
-
-/* backlight control */
-#define BALLOON3_GPIO_RUN_BACKLIGHT	(99)
-
-#define BALLOON3_GPIO_S0_CD		(105)
-
-/* NAND */
-#define BALLOON3_GPIO_RUN_NAND		(102)
-
-/* PCF8574A Leds */
-#define	BALLOON3_PCF_GPIO_BASE		160
-#define	BALLOON3_PCF_GPIO_LED0		(BALLOON3_PCF_GPIO_BASE + 0)
-#define	BALLOON3_PCF_GPIO_LED1		(BALLOON3_PCF_GPIO_BASE + 1)
-#define	BALLOON3_PCF_GPIO_LED2		(BALLOON3_PCF_GPIO_BASE + 2)
-#define	BALLOON3_PCF_GPIO_LED3		(BALLOON3_PCF_GPIO_BASE + 3)
-#define	BALLOON3_PCF_GPIO_LED4		(BALLOON3_PCF_GPIO_BASE + 4)
-#define	BALLOON3_PCF_GPIO_LED5		(BALLOON3_PCF_GPIO_BASE + 5)
-#define	BALLOON3_PCF_GPIO_LED6		(BALLOON3_PCF_GPIO_BASE + 6)
-#define	BALLOON3_PCF_GPIO_LED7		(BALLOON3_PCF_GPIO_BASE + 7)
-
-/* FPGA Interrupt Mask/Acknowledge Register */
-#define BALLOON3_INT_S0_IRQ		(1 << 0)  /* PCMCIA 0 IRQ */
-#define BALLOON3_INT_S0_STSCHG		(1 << 1)  /* PCMCIA 0 status changed */
-
-/* CPLD (and FPGA) interface definitions */
-#define CPLD_LCD0_DATA_SET             0x00
-#define CPLD_LCD0_DATA_CLR             0x10
-#define CPLD_LCD0_COMMAND_SET          0x01
-#define CPLD_LCD0_COMMAND_CLR          0x11
-#define CPLD_LCD1_DATA_SET             0x02
-#define CPLD_LCD1_DATA_CLR             0x12
-#define CPLD_LCD1_COMMAND_SET          0x03
-#define CPLD_LCD1_COMMAND_CLR          0x13
-
-#define CPLD_MISC_SET                  0x07
-#define CPLD_MISC_CLR                  0x17
-#define CPLD_MISC_LOON_NRESET_BIT      0
-#define CPLD_MISC_LOON_UNSUSP_BIT      1
-#define CPLD_MISC_RUN_5V_BIT           2
-#define CPLD_MISC_CHG_D0_BIT           3
-#define CPLD_MISC_CHG_D1_BIT           4
-#define CPLD_MISC_DAC_NCS_BIT          5
-
-#define CPLD_LCD_SET                   0x08
-#define CPLD_LCD_CLR                   0x18
-#define CPLD_LCD_BACKLIGHT_EN_0_BIT    0
-#define CPLD_LCD_BACKLIGHT_EN_1_BIT    1
-#define CPLD_LCD_LED_RED_BIT           4
-#define CPLD_LCD_LED_GREEN_BIT         5
-#define CPLD_LCD_NRESET_BIT            7
-
-#define CPLD_LCD_RO_SET                0x09
-#define CPLD_LCD_RO_CLR                0x19
-#define CPLD_LCD_RO_LCD0_nWAIT_BIT     0
-#define CPLD_LCD_RO_LCD1_nWAIT_BIT     1
-
-#define CPLD_SERIAL_SET                0x0a
-#define CPLD_SERIAL_CLR                0x1a
-#define CPLD_SERIAL_GSM_RI_BIT         0
-#define CPLD_SERIAL_GSM_CTS_BIT        1
-#define CPLD_SERIAL_GSM_DTR_BIT        2
-#define CPLD_SERIAL_LPR_CTS_BIT        3
-#define CPLD_SERIAL_TC232_CTS_BIT      4
-#define CPLD_SERIAL_TC232_DSR_BIT      5
-
-#define CPLD_SROUTING_SET              0x0b
-#define CPLD_SROUTING_CLR              0x1b
-#define CPLD_SROUTING_MSP430_LPR       0
-#define CPLD_SROUTING_MSP430_TC232     1
-#define CPLD_SROUTING_MSP430_GSM       2
-#define CPLD_SROUTING_LOON_LPR         (0 << 4)
-#define CPLD_SROUTING_LOON_TC232       (1 << 4)
-#define CPLD_SROUTING_LOON_GSM         (2 << 4)
-
-#define CPLD_AROUTING_SET              0x0c
-#define CPLD_AROUTING_CLR              0x1c
-#define CPLD_AROUTING_MIC2PHONE_BIT    0
-#define CPLD_AROUTING_PHONE2INT_BIT    1
-#define CPLD_AROUTING_PHONE2EXT_BIT    2
-#define CPLD_AROUTING_LOONL2INT_BIT    3
-#define CPLD_AROUTING_LOONL2EXT_BIT    4
-#define CPLD_AROUTING_LOONR2PHONE_BIT  5
-#define CPLD_AROUTING_LOONR2INT_BIT    6
-#define CPLD_AROUTING_LOONR2EXT_BIT    7
-
-/* Balloon3 Interrupts */
-#define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
-
-#define BALLOON3_AUX_NIRQ	PXA_GPIO_TO_IRQ(BALLOON3_GPIO_AUX_NIRQ)
-#define BALLOON3_CODEC_IRQ	PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ)
-
-#define BALLOON3_NR_IRQS	(IRQ_BOARD_START + 16)
-
-extern int balloon3_has(enum balloon3_features feature);
-
-#endif
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
deleted file mode 100644
index 7712327f56a8..000000000000
--- a/arch/arm/mach-pxa/capc7117.c
+++ /dev/null
@@ -1,159 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/capc7117.c
- *
- * Support for the Embedian CAPC-7117 Evaluation Kit
- * based on the Embedian MXM-8x10 Computer on Module
- *
- * Copyright (C) 2009 Embedian Inc.
- * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
- *
- * 2007-09-04: eric miao <eric.y.miao@gmail.com>
- *             rewrite to align with latest kernel
- *
- * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
- *             Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
- *             rework for upstream merge
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/serial_8250.h>
-#include <linux/gpio.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa320.h"
-#include "mxm8x10.h"
-
-#include "generic.h"
-
-/* IDE (PATA) Support */
-static struct pata_platform_info pata_platform_data = {
-	.ioport_shift = 1
-};
-
-static struct resource capc7117_ide_resources[] = {
-	[0] = {
-	       .start = 0x11000020,
-	       .end = 0x1100003f,
-	       .flags = IORESOURCE_MEM
-	},
-	[1] = {
-	       .start = 0x1100001c,
-	       .end = 0x1100001c,
-	       .flags = IORESOURCE_MEM
-	},
-	[2] = {
-	       .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
-	       .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
-	       .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
-	}
-};
-
-static struct platform_device capc7117_ide_device = {
-	.name = "pata_platform",
-	.num_resources = ARRAY_SIZE(capc7117_ide_resources),
-	.resource = capc7117_ide_resources,
-	.dev = {
-		.platform_data = &pata_platform_data,
-		.coherent_dma_mask = ~0		/* grumble */
-	}
-};
-
-static void __init capc7117_ide_init(void)
-{
-	platform_device_register(&capc7117_ide_device);
-}
-
-/* TI16C752 UART support */
-#define	TI16C752_FLAGS		(UPF_BOOT_AUTOCONF | \
-					UPF_IOREMAP | \
-					UPF_BUGGY_UART | \
-					UPF_SKIP_TEST)
-#define	TI16C752_UARTCLK	(22118400)
-static struct plat_serial8250_port ti16c752_platform_data[] = {
-	[0] = {
-	       .mapbase = 0x14000000,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO78)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[1] = {
-	       .mapbase = 0x14000040,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO79)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[2] = {
-	       .mapbase = 0x14000080,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO80)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[3] = {
-	       .mapbase = 0x140000c0,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO81)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[4] = {
-	       /* end of array */
-	}
-};
-
-static struct platform_device ti16c752_device = {
-	.name = "serial8250",
-	.id = PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = ti16c752_platform_data
-	}
-};
-
-static void __init capc7117_uarts_init(void)
-{
-	platform_device_register(&ti16c752_device);
-}
-
-static void __init capc7117_init(void)
-{
-	/* Init CoM */
-	mxm_8x10_barebones_init();
-
-	/* Init evaluation board peripherals */
-	mxm_8x10_ac97_init();
-	mxm_8x10_usb_host_init();
-	mxm_8x10_mmc_init();
-
-	capc7117_uarts_init();
-	capc7117_ide_init();
-
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(CAPC7117,
-	      "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
-	.atag_offset = 0x100,
-	.map_io = pxa3xx_map_io,
-	.nr_irqs = PXA_NR_IRQS,
-	.init_irq = pxa3xx_init_irq,
-	.handle_irq = pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine = capc7117_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
deleted file mode 100644
index 01f364a66446..000000000000
--- a/arch/arm/mach-pxa/cm-x300.c
+++ /dev/null
@@ -1,883 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/cm-x300.c
- *
- * Support for the CompuLab CM-X300 modules
- *
- * Copyright (C) 2008,2009 CompuLab Ltd.
- *
- * Mike Rapoport <mike@compulab.co.il>
- * Igor Grinberg <grinberg@compulab.co.il>
- */
-#define pr_fmt(fmt) "%s: " fmt, __func__
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/dm9000.h>
-#include <linux/leds.h>
-#include <linux/platform_data/rtc-v3020.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <linux/mfd/da903x.h>
-#include <linux/regulator/machine.h>
-#include <linux/power_supply.h>
-#include <linux/apm-emulation.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/tdo24m.h>
-
-#include <linux/soc/pxa/cpu.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/setup.h>
-#include <asm/system_info.h>
-
-#include "pxa300.h"
-#include "pxa27x-udc.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/usb-pxa3xx-ulpi.h>
-
-#include <asm/mach/map.h>
-
-#include "generic.h"
-#include "devices.h"
-
-#define CM_X300_ETH_PHYS	0x08000010
-
-#define GPIO82_MMC_IRQ		(82)
-#define GPIO85_MMC_WP		(85)
-
-#define	CM_X300_MMC_IRQ		PXA_GPIO_TO_IRQ(GPIO82_MMC_IRQ)
-
-#define GPIO95_RTC_CS		(95)
-#define GPIO96_RTC_WR		(96)
-#define GPIO97_RTC_RD		(97)
-#define GPIO98_RTC_IO		(98)
-
-#define GPIO_ULPI_PHY_RST	(127)
-
-static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-
-	/* BTUART */
-	GPIO111_UART2_RTS,
-	GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
-	GPIO113_UART2_TXD,
-	GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
-
-	/* STUART */
-	GPIO109_UART3_TXD,
-	GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
-
-	/* AC97 */
-	GPIO23_AC97_nACRESET,
-	GPIO24_AC97_SYSCLK,
-	GPIO29_AC97_BITCLK,
-	GPIO25_AC97_SDATA_IN_0,
-	GPIO27_AC97_SDATA_OUT,
-	GPIO28_AC97_SYNC,
-
-	/* Keypad */
-	GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
-	GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
-	GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
-	GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
-	GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
-	GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
-	GPIO121_KP_MKOUT_0,
-	GPIO122_KP_MKOUT_1,
-	GPIO123_KP_MKOUT_2,
-	GPIO124_KP_MKOUT_3,
-	GPIO125_KP_MKOUT_4,
-	GPIO4_2_KP_MKOUT_5,
-
-	/* MMC1 */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,	/* CMD0 for slot 0 */
-
-	/* MMC2 */
-	GPIO9_MMC2_DAT0,
-	GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO11_MMC2_DAT2,
-	GPIO12_MMC2_DAT3,
-	GPIO13_MMC2_CLK,
-	GPIO14_MMC2_CMD,
-
-	/* FFUART */
-	GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
-	GPIO31_UART1_TXD,
-	GPIO32_UART1_CTS,
-	GPIO37_UART1_RTS,
-	GPIO33_UART1_DCD,
-	GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
-	GPIO35_UART1_RI,
-	GPIO36_UART1_DTR,
-
-	/* GPIOs */
-	GPIO82_GPIO | MFP_PULL_HIGH,	/* MMC CD */
-	GPIO85_GPIO,			/* MMC WP */
-	GPIO99_GPIO,			/* Ethernet IRQ */
-
-	/* RTC GPIOs */
-	GPIO95_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC CS */
-	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC WR */
-	GPIO97_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC RD */
-	GPIO98_GPIO,				/* RTC IO */
-
-	/* Standard I2C */
-	GPIO21_I2C_SCL,
-	GPIO22_I2C_SDA,
-
-	/* PWM Backlight */
-	GPIO19_PWM2_OUT,
-};
-
-static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
-	/* GPIOs */
-	GPIO79_GPIO,			/* LED */
-	GPIO77_GPIO,			/* WiFi reset */
-	GPIO78_GPIO,			/* BT reset */
-};
-
-static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = {
-	/* GPIOs */
-	GPIO76_GPIO,			/* LED */
-	GPIO71_GPIO,			/* WiFi reset */
-	GPIO70_GPIO,			/* BT reset */
-};
-
-static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = {
-	/* USB PORT 2 */
-	ULPI_STP,
-	ULPI_NXT,
-	ULPI_DIR,
-	GPIO30_ULPI_DATA_OUT_0,
-	GPIO31_ULPI_DATA_OUT_1,
-	GPIO32_ULPI_DATA_OUT_2,
-	GPIO33_ULPI_DATA_OUT_3,
-	GPIO34_ULPI_DATA_OUT_4,
-	GPIO35_ULPI_DATA_OUT_5,
-	GPIO36_ULPI_DATA_OUT_6,
-	GPIO37_ULPI_DATA_OUT_7,
-	GPIO38_ULPI_CLK,
-	/* external PHY reset pin */
-	GPIO127_GPIO,
-
-	/* USB PORT 3 */
-	GPIO77_USB_P3_1,
-	GPIO78_USB_P3_2,
-	GPIO79_USB_P3_3,
-	GPIO80_USB_P3_4,
-	GPIO81_USB_P3_5,
-	GPIO82_USB_P3_6,
-	GPIO0_2_USBH_PEN,
-};
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= CM_X300_ETH_PHYS,
-		.end	= CM_X300_ETH_PHYS + 0x3,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= CM_X300_ETH_PHYS + 0x4,
-		.end	= CM_X300_ETH_PHYS + 0x4 + 500,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
-		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct dm9000_plat_data cm_x300_dm9000_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
-};
-
-static struct platform_device dm9000_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.dev		= {
-		.platform_data = &cm_x300_dm9000_platdata,
-	}
-
-};
-
-static void __init cm_x300_init_dm9000(void)
-{
-	platform_device_register(&dm9000_device);
-}
-#else
-static inline void cm_x300_init_dm9000(void) {}
-#endif
-
-/* LCD */
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info cm_x300_lcd_modes[] = {
-	[0] = {
-		.pixclock	= 38250,
-		.bpp		= 16,
-		.xres		= 480,
-		.yres		= 640,
-		.hsync_len	= 8,
-		.vsync_len	= 2,
-		.left_margin	= 8,
-		.upper_margin	= 2,
-		.right_margin	= 24,
-		.lower_margin	= 4,
-		.cmap_greyscale	= 0,
-	},
-	[1] = {
-		.pixclock	= 153800,
-		.bpp		= 16,
-		.xres		= 240,
-		.yres		= 320,
-		.hsync_len	= 8,
-		.vsync_len	= 2,
-		.left_margin	= 8,
-		.upper_margin	= 2,
-		.right_margin	= 88,
-		.lower_margin	= 2,
-		.cmap_greyscale	= 0,
-	},
-};
-
-static struct pxafb_mach_info cm_x300_lcd = {
-	.modes			= cm_x300_lcd_modes,
-	.num_modes		= ARRAY_SIZE(cm_x300_lcd_modes),
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init cm_x300_init_lcd(void)
-{
-	pxa_set_fb_info(NULL, &cm_x300_lcd);
-}
-#else
-static inline void cm_x300_init_lcd(void) {}
-#endif
-
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static struct pwm_lookup cm_x300_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 10000,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data cm_x300_backlight_data = {
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-};
-
-static struct platform_device cm_x300_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm0.dev,
-		.platform_data	= &cm_x300_backlight_data,
-	},
-};
-
-static void cm_x300_init_bl(void)
-{
-	pwm_add_table(cm_x300_pwm_lookup, ARRAY_SIZE(cm_x300_pwm_lookup));
-	platform_device_register(&cm_x300_backlight_device);
-}
-#else
-static inline void cm_x300_init_bl(void) {}
-#endif
-
-#if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE)
-#define GPIO_LCD_BASE	(144)
-#define GPIO_LCD_DIN	(GPIO_LCD_BASE + 8)	/* aux_gpio3_0 */
-#define GPIO_LCD_DOUT	(GPIO_LCD_BASE + 9)	/* aux_gpio3_1 */
-#define GPIO_LCD_SCL	(GPIO_LCD_BASE + 10)	/* aux_gpio3_2 */
-#define GPIO_LCD_CS	(GPIO_LCD_BASE + 11)	/* aux_gpio3_3 */
-#define LCD_SPI_BUS_NUM	(1)
-
-static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = {
-	.num_chipselect	= 1,
-};
-
-static struct platform_device cm_x300_spi_gpio = {
-	.name		= "spi_gpio",
-	.id		= LCD_SPI_BUS_NUM,
-	.dev		= {
-		.platform_data	= &cm_x300_spi_gpio_pdata,
-	},
-};
-
-static struct gpiod_lookup_table cm_x300_spi_gpiod_table = {
-	.dev_id         = "spi_gpio",
-	.table          = {
-		GPIO_LOOKUP("pca9555.1", GPIO_LCD_SCL - GPIO_LCD_BASE,
-			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("pca9555.1", GPIO_LCD_DIN - GPIO_LCD_BASE,
-			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("pca9555.1", GPIO_LCD_DOUT - GPIO_LCD_BASE,
-			    "miso", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("pca9555.1", GPIO_LCD_CS - GPIO_LCD_BASE,
-			    "cs", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct tdo24m_platform_data cm_x300_tdo24m_pdata = {
-	.model = TDO35S,
-};
-
-static struct spi_board_info cm_x300_spi_devices[] __initdata = {
-	{
-		.modalias		= "tdo24m",
-		.max_speed_hz		= 1000000,
-		.bus_num		= LCD_SPI_BUS_NUM,
-		.chip_select		= 0,
-		.platform_data		= &cm_x300_tdo24m_pdata,
-	},
-};
-
-static void __init cm_x300_init_spi(void)
-{
-	spi_register_board_info(cm_x300_spi_devices,
-				ARRAY_SIZE(cm_x300_spi_devices));
-	gpiod_add_lookup_table(&cm_x300_spi_gpiod_table);
-	platform_device_register(&cm_x300_spi_gpio);
-}
-#else
-static inline void cm_x300_init_spi(void) {}
-#endif
-
-#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
-static void __init cm_x300_init_ac97(void)
-{
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void cm_x300_init_ac97(void) {}
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-static struct mtd_partition cm_x300_nand_partitions[] = {
-	[0] = {
-		.name        = "OBM",
-		.offset      = 0,
-		.size        = SZ_256K,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[1] = {
-		.name        = "U-Boot",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_256K,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[2] = {
-		.name        = "Environment",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_256K,
-	},
-	[3] = {
-		.name        = "reserved",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_256K + SZ_1M,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[4] = {
-		.name        = "kernel",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_4M,
-	},
-	[5] = {
-		.name        = "fs",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
-	.keep_config	= 1,
-	.parts		= cm_x300_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(cm_x300_nand_partitions),
-};
-
-static void __init cm_x300_init_nand(void)
-{
-	pxa3xx_set_nand_info(&cm_x300_nand_info);
-}
-#else
-static inline void cm_x300_init_nand(void) {}
-#endif
-
-#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-static struct pxamci_platform_data cm_x300_mci_platform_data = {
-	.detect_delay_ms	= 200,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table cm_x300_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on GPIO 82 */
-		GPIO_LOOKUP("gpio-pxa", GPIO82_MMC_IRQ, "cd", GPIO_ACTIVE_LOW),
-		/* Write protect on GPIO 85 */
-		GPIO_LOOKUP("gpio-pxa", GPIO85_MMC_WP, "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
-   no detection/ro pins */
-static int cm_x300_mci2_init(struct device *dev,
-			     irq_handler_t cm_x300_detect_int,
-	void *data)
-{
-	return 0;
-}
-
-static void cm_x300_mci2_exit(struct device *dev, void *data)
-{
-}
-
-static struct pxamci_platform_data cm_x300_mci2_platform_data = {
-	.detect_delay_ms	= 200,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 			= cm_x300_mci2_init,
-	.exit			= cm_x300_mci2_exit,
-};
-
-static void __init cm_x300_init_mmc(void)
-{
-	gpiod_add_lookup_table(&cm_x300_mci_gpio_table);
-	pxa_set_mci_info(&cm_x300_mci_platform_data);
-	pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data);
-}
-#else
-static inline void cm_x300_init_mmc(void) {}
-#endif
-
-#if defined(CONFIG_PXA310_ULPI)
-static struct clk *pout_clk;
-
-static int cm_x300_ulpi_phy_reset(void)
-{
-	int err;
-
-	/* reset the PHY */
-	err = gpio_request_one(GPIO_ULPI_PHY_RST, GPIOF_OUT_INIT_LOW,
-			       "ulpi reset");
-	if (err) {
-		pr_err("failed to request ULPI reset GPIO: %d\n", err);
-		return err;
-	}
-
-	msleep(10);
-	gpio_set_value(GPIO_ULPI_PHY_RST, 1);
-	msleep(10);
-
-	gpio_free(GPIO_ULPI_PHY_RST);
-
-	return 0;
-}
-
-static int cm_x300_u2d_init(struct device *dev)
-{
-	int err = 0;
-
-	if (cpu_is_pxa310()) {
-		/* CLK_POUT is connected to the ULPI PHY */
-		pout_clk = clk_get(NULL, "CLK_POUT");
-		if (IS_ERR(pout_clk)) {
-			err = PTR_ERR(pout_clk);
-			pr_err("failed to get CLK_POUT: %d\n", err);
-			return err;
-		}
-		clk_prepare_enable(pout_clk);
-
-		err = cm_x300_ulpi_phy_reset();
-		if (err) {
-			clk_disable(pout_clk);
-			clk_put(pout_clk);
-		}
-	}
-
-	return err;
-}
-
-static void cm_x300_u2d_exit(struct device *dev)
-{
-	if (cpu_is_pxa310()) {
-		clk_disable_unprepare(pout_clk);
-		clk_put(pout_clk);
-	}
-}
-
-static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = {
-	.ulpi_mode	= ULPI_SER_6PIN,
-	.init		= cm_x300_u2d_init,
-	.exit		= cm_x300_u2d_exit,
-};
-
-static void __init cm_x300_init_u2d(void)
-{
-	pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
-}
-#else
-static inline void cm_x300_init_u2d(void) {}
-#endif
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int cm_x300_ohci_init(struct device *dev)
-{
-	if (cpu_is_pxa300())
-		UP2OCR = UP2OCR_HXS
-			| UP2OCR_HXOE | UP2OCR_DMPDE | UP2OCR_DPPDE;
-
-	return 0;
-}
-
-static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW,
-	.init		= cm_x300_ohci_init,
-};
-
-static void __init cm_x300_init_ohci(void)
-{
-	pxa_set_ohci_info(&cm_x300_ohci_platform_data);
-}
-#else
-static inline void cm_x300_init_ohci(void) {}
-#endif
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led cm_x300_leds[] = {
-	[0] = {
-		.name = "cm-x300:green",
-		.default_trigger = "heartbeat",
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data cm_x300_gpio_led_pdata = {
-	.num_leds = ARRAY_SIZE(cm_x300_leds),
-	.leds = cm_x300_leds,
-};
-
-static struct platform_device cm_x300_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cm_x300_gpio_led_pdata,
-	},
-};
-
-static void __init cm_x300_init_leds(void)
-{
-	if (system_rev < 130)
-		cm_x300_leds[0].gpio = 79;
-	else
-		cm_x300_leds[0].gpio = 76;
-
-	platform_device_register(&cm_x300_led_device);
-}
-#else
-static inline void cm_x300_init_leds(void) {}
-#endif
-
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-/* PCA9555 */
-static struct pca953x_platform_data cm_x300_gpio_ext_pdata_0 = {
-	.gpio_base = 128,
-};
-
-static struct pca953x_platform_data cm_x300_gpio_ext_pdata_1 = {
-	.gpio_base = 144,
-};
-
-static struct i2c_board_info cm_x300_gpio_ext_info[] = {
-	[0] = {
-		I2C_BOARD_INFO("pca9555", 0x24),
-		.platform_data = &cm_x300_gpio_ext_pdata_0,
-	},
-	[1] = {
-		I2C_BOARD_INFO("pca9555", 0x25),
-		.platform_data = &cm_x300_gpio_ext_pdata_1,
-	},
-};
-
-static void __init cm_x300_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, cm_x300_gpio_ext_info,
-				ARRAY_SIZE(cm_x300_gpio_ext_info));
-}
-#else
-static inline void cm_x300_init_i2c(void) {}
-#endif
-
-#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
-struct v3020_platform_data cm_x300_v3020_pdata = {
-	.use_gpio	= 1,
-	.gpio_cs	= GPIO95_RTC_CS,
-	.gpio_wr	= GPIO96_RTC_WR,
-	.gpio_rd	= GPIO97_RTC_RD,
-	.gpio_io	= GPIO98_RTC_IO,
-};
-
-static struct platform_device cm_x300_rtc_device = {
-	.name		= "v3020",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cm_x300_v3020_pdata,
-	}
-};
-
-static void __init cm_x300_init_rtc(void)
-{
-	platform_device_register(&cm_x300_rtc_device);
-}
-#else
-static inline void cm_x300_init_rtc(void) {}
-#endif
-
-/* Battery */
-struct power_supply_info cm_x300_psy_info = {
-	.name = "battery",
-	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.voltage_max_design = 4200000,
-	.voltage_min_design = 3000000,
-	.use_for_apm = 1,
-};
-
-static void cm_x300_battery_low(void)
-{
-#if defined(CONFIG_APM_EMULATION)
-	apm_queue_event(APM_LOW_BATTERY);
-#endif
-}
-
-static void cm_x300_battery_critical(void)
-{
-#if defined(CONFIG_APM_EMULATION)
-	apm_queue_event(APM_CRITICAL_SUSPEND);
-#endif
-}
-
-struct da9030_battery_info cm_x300_battery_info = {
-	.battery_info = &cm_x300_psy_info,
-
-	.charge_milliamp = 1000,
-	.charge_millivolt = 4200,
-
-	.vbat_low = 3600,
-	.vbat_crit = 3400,
-	.vbat_charge_start = 4100,
-	.vbat_charge_stop = 4200,
-	.vbat_charge_restart = 4000,
-
-	.vcharge_min = 3200,
-	.vcharge_max = 5500,
-
-	.tbat_low = 197,
-	.tbat_high = 78,
-	.tbat_restart = 100,
-
-	.batmon_interval = 0,
-
-	.battery_low = cm_x300_battery_low,
-	.battery_critical = cm_x300_battery_critical,
-};
-
-static struct regulator_consumer_supply buck2_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data buck2_data = {
-	.constraints = {
-		.min_uV = 1375000,
-		.max_uV = 1375000,
-		.state_mem = {
-			.enabled = 0,
-		},
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.apply_uV = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(buck2_consumers),
-	.consumer_supplies = buck2_consumers,
-};
-
-/* DA9030 */
-struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
-	{
-		.name = "da903x-battery",
-		.id = DA9030_ID_BAT,
-		.platform_data = &cm_x300_battery_info,
-	},
-	{
-		.name = "da903x-regulator",
-		.id = DA9030_ID_BUCK2,
-		.platform_data = &buck2_data,
-	},
-};
-
-static struct da903x_platform_data cm_x300_da9030_info = {
-	.num_subdevs = ARRAY_SIZE(cm_x300_da9030_subdevs),
-	.subdevs = cm_x300_da9030_subdevs,
-};
-
-static struct i2c_board_info cm_x300_pmic_info = {
-	I2C_BOARD_INFO("da9030", 0x49),
-	.irq = IRQ_WAKEUP0,
-	.platform_data = &cm_x300_da9030_info,
-};
-
-static struct i2c_pxa_platform_data cm_x300_pwr_i2c_info = {
-	.use_pio = 1,
-};
-
-static void __init cm_x300_init_da9030(void)
-{
-	pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
-	i2c_register_board_info(1, &cm_x300_pmic_info, 1);
-	irq_set_irq_wake(IRQ_WAKEUP0, 1);
-}
-
-/* wi2wi gpio setting for system_rev >= 130 */
-static struct gpio cm_x300_wi2wi_gpios[] __initdata = {
-	{ 71, GPIOF_OUT_INIT_HIGH, "wlan en" },
-	{ 70, GPIOF_OUT_INIT_HIGH, "bt reset" },
-};
-
-static void __init cm_x300_init_wi2wi(void)
-{
-	int err;
-
-	if (system_rev < 130) {
-		cm_x300_wi2wi_gpios[0].gpio = 77;	/* wlan en */
-		cm_x300_wi2wi_gpios[1].gpio = 78;	/* bt reset */
-	}
-
-	/* Libertas and CSR reset */
-	err = gpio_request_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
-	if (err) {
-		pr_err("failed to request wifi/bt gpios: %d\n", err);
-		return;
-	}
-
-	udelay(10);
-	gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 0);
-	udelay(10);
-	gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 1);
-
-	gpio_free_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
-}
-
-/* MFP */
-static void __init cm_x300_init_mfp(void)
-{
-	/* board-processor specific GPIO initialization */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg));
-
-	if (system_rev < 130)
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg));
-	else
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg));
-
-	if (cpu_is_pxa310())
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg));
-}
-
-static void __init cm_x300_init(void)
-{
-	cm_x300_init_mfp();
-
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	if (cpu_is_pxa300())
-		pxa_set_ffuart_info(NULL);
-
-	cm_x300_init_da9030();
-	cm_x300_init_dm9000();
-	cm_x300_init_lcd();
-	cm_x300_init_u2d();
-	cm_x300_init_ohci();
-	cm_x300_init_mmc();
-	cm_x300_init_nand();
-	cm_x300_init_leds();
-	cm_x300_init_i2c();
-	cm_x300_init_spi();
-	cm_x300_init_rtc();
-	cm_x300_init_ac97();
-	cm_x300_init_wi2wi();
-	cm_x300_init_bl();
-
-	regulator_has_full_constraints();
-}
-
-static void __init cm_x300_fixup(struct tag *tags, char **cmdline)
-{
-	/* Make sure that mi->bank[0].start = PHYS_ADDR */
-	for (; tags->hdr.size; tags = tag_next(tags))
-		if (tags->hdr.tag == ATAG_MEM &&
-			tags->u.mem.start == 0x80000000) {
-			tags->u.mem.start = 0xa0000000;
-			break;
-		}
-}
-
-MACHINE_START(CM_X300, "CM-X300 module")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= cm_x300_init,
-	.fixup		= cm_x300_fixup,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
deleted file mode 100644
index b62af07b8f96..000000000000
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ /dev/null
@@ -1,138 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/colibri-evalboard.c
- *
- *  Support for Toradex Colibri Evaluation Carrier Board
- *  Daniel Mack <daniel@caiaq.de>
- *  Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/gpio/machine.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <asm/io.h>
-
-#include "pxa27x.h"
-#include "colibri.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include "pxa27x-udc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data colibri_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-static struct gpiod_lookup_table colibri_pxa270_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO0_COLIBRI_PXA270_SD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table colibri_pxa300_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO13_COLIBRI_PXA300_SD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table colibri_pxa320_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO28_COLIBRI_PXA320_SD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init colibri_mmc_init(void)
-{
-	if (machine_is_colibri())	/* PXA270 Colibri */
-		gpiod_add_lookup_table(&colibri_pxa270_mci_gpio_table);
-	if (machine_is_colibri300())	/* PXA300 Colibri */
-		gpiod_add_lookup_table(&colibri_pxa300_mci_gpio_table);
-	else				/* PXA320 Colibri */
-		gpiod_add_lookup_table(&colibri_pxa320_mci_gpio_table);
-
-	pxa_set_mci_info(&colibri_mci_platform_data);
-}
-#else
-static inline void colibri_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int colibri_ohci_init(struct device *dev)
-{
-	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-	return 0;
-}
-
-static struct pxaohci_platform_data colibri_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 |
-			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
-	.init		= colibri_ohci_init,
-};
-
-static void __init colibri_uhc_init(void)
-{
-	/* Colibri PXA270 has two usb ports, TBA for 320 */
-	if (machine_is_colibri())
-		colibri_ohci_info.flags	|= ENABLE_PORT2;
-
-	pxa_set_ohci_info(&colibri_ohci_info);
-}
-#else
-static inline void colibri_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * I2C RTC
- ******************************************************************************/
-#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
-static struct i2c_board_info __initdata colibri_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("m41t00", 0x68),
-	},
-};
-
-static void __init colibri_rtc_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(colibri_i2c_devs));
-}
-#else
-static inline void colibri_rtc_init(void) {}
-#endif
-
-void __init colibri_evalboard_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	colibri_mmc_init();
-	colibri_uhc_init();
-	colibri_rtc_init();
-}
diff --git a/arch/arm/mach-pxa/colibri-pcmcia.c b/arch/arm/mach-pxa/colibri-pcmcia.c
deleted file mode 100644
index 9da7b478e5eb..000000000000
--- a/arch/arm/mach-pxa/colibri-pcmcia.c
+++ /dev/null
@@ -1,165 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_colibri.c
- *
- * Driver for Toradex Colibri PXA270 CF socket
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-
-#include <pcmcia/soc_common.h>
-
-#define	COLIBRI270_RESET_GPIO	53
-#define	COLIBRI270_PPEN_GPIO	107
-#define	COLIBRI270_BVD1_GPIO	83
-#define	COLIBRI270_BVD2_GPIO	82
-#define	COLIBRI270_DETECT_GPIO	84
-#define	COLIBRI270_READY_GPIO	1
-
-#define	COLIBRI320_RESET_GPIO	77
-#define	COLIBRI320_PPEN_GPIO	57
-#define	COLIBRI320_BVD1_GPIO	53
-#define	COLIBRI320_BVD2_GPIO	79
-#define	COLIBRI320_DETECT_GPIO	81
-#define	COLIBRI320_READY_GPIO	29
-
-enum {
-	DETECT = 0,
-	READY = 1,
-	BVD1 = 2,
-	BVD2 = 3,
-	PPEN = 4,
-	RESET = 5,
-};
-
-/* Contents of this array are configured on-the-fly in init function */
-static struct gpio colibri_pcmcia_gpios[] = {
-	{ 0,	GPIOF_IN,	"PCMCIA Detect" },
-	{ 0,	GPIOF_IN,	"PCMCIA Ready" },
-	{ 0,	GPIOF_IN,	"PCMCIA BVD1" },
-	{ 0,	GPIOF_IN,	"PCMCIA BVD2" },
-	{ 0,	GPIOF_INIT_LOW,	"PCMCIA PPEN" },
-	{ 0,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
-};
-
-static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(colibri_pcmcia_gpios,
-				ARRAY_SIZE(colibri_pcmcia_gpios));
-	if (ret)
-		goto err1;
-
-	skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpios[READY].gpio);
-	skt->stat[SOC_STAT_CD].irq = gpio_to_irq(colibri_pcmcia_gpios[DETECT].gpio);
-	skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
-
-err1:
-	return ret;
-}
-
-static void colibri_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(colibri_pcmcia_gpios,
-			ARRAY_SIZE(colibri_pcmcia_gpios));
-}
-
-static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-
-	state->detect = !!gpio_get_value(colibri_pcmcia_gpios[DETECT].gpio);
-	state->ready  = !!gpio_get_value(colibri_pcmcia_gpios[READY].gpio);
-	state->bvd1   = !!gpio_get_value(colibri_pcmcia_gpios[BVD1].gpio);
-	state->bvd2   = !!gpio_get_value(colibri_pcmcia_gpios[BVD2].gpio);
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int
-colibri_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	gpio_set_value(colibri_pcmcia_gpios[PPEN].gpio,
-			!(state->Vcc == 33 && state->Vpp < 50));
-	gpio_set_value(colibri_pcmcia_gpios[RESET].gpio,
-			state->flags & SS_RESET);
-	return 0;
-}
-
-static struct pcmcia_low_level colibri_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 0,
-	.nr			= 1,
-
-	.hw_init		= colibri_pcmcia_hw_init,
-	.hw_shutdown		= colibri_pcmcia_hw_shutdown,
-
-	.socket_state		= colibri_pcmcia_socket_state,
-	.configure_socket	= colibri_pcmcia_configure_socket,
-};
-
-static struct platform_device *colibri_pcmcia_device;
-
-static int __init colibri_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_colibri() && !machine_is_colibri320())
-		return -ENODEV;
-
-	colibri_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!colibri_pcmcia_device)
-		return -ENOMEM;
-
-	/* Colibri PXA270 */
-	if (machine_is_colibri()) {
-		colibri_pcmcia_gpios[RESET].gpio	= COLIBRI270_RESET_GPIO;
-		colibri_pcmcia_gpios[PPEN].gpio		= COLIBRI270_PPEN_GPIO;
-		colibri_pcmcia_gpios[BVD1].gpio		= COLIBRI270_BVD1_GPIO;
-		colibri_pcmcia_gpios[BVD2].gpio		= COLIBRI270_BVD2_GPIO;
-		colibri_pcmcia_gpios[DETECT].gpio	= COLIBRI270_DETECT_GPIO;
-		colibri_pcmcia_gpios[READY].gpio	= COLIBRI270_READY_GPIO;
-	/* Colibri PXA320 */
-	} else if (machine_is_colibri320()) {
-		colibri_pcmcia_gpios[RESET].gpio	= COLIBRI320_RESET_GPIO;
-		colibri_pcmcia_gpios[PPEN].gpio		= COLIBRI320_PPEN_GPIO;
-		colibri_pcmcia_gpios[BVD1].gpio		= COLIBRI320_BVD1_GPIO;
-		colibri_pcmcia_gpios[BVD2].gpio		= COLIBRI320_BVD2_GPIO;
-		colibri_pcmcia_gpios[DETECT].gpio	= COLIBRI320_DETECT_GPIO;
-		colibri_pcmcia_gpios[READY].gpio	= COLIBRI320_READY_GPIO;
-	}
-
-	ret = platform_device_add_data(colibri_pcmcia_device,
-		&colibri_pcmcia_ops, sizeof(colibri_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(colibri_pcmcia_device);
-
-	if (ret)
-		platform_device_put(colibri_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit colibri_pcmcia_exit(void)
-{
-	platform_device_unregister(colibri_pcmcia_device);
-}
-
-module_init(colibri_pcmcia_init);
-module_exit(colibri_pcmcia_exit);
-
-MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Toradex Colibri PXA270/PXA320");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
deleted file mode 100644
index f6eaf464ca83..000000000000
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ /dev/null
@@ -1,236 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/income.c
- *
- * Support for Income s.r.o. SH-Dmaster PXA270 SBC
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- * Pavel Revak <palo@bielyvlk.sk>
- */
-
-#include <linux/bitops.h>
-#include <linux/delay.h>
-#include <linux/gpio/machine.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include "pxa27x.h"
-#include "pxa27x-udc.h"
-#include <linux/platform_data/video-pxafb.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define GPIO114_INCOME_ETH_IRQ  (114)
-#define GPIO0_INCOME_SD_DETECT  (0)
-#define GPIO0_INCOME_SD_RO      (1)
-#define GPIO54_INCOME_LED_A     (54)
-#define GPIO55_INCOME_LED_B     (55)
-#define GPIO113_INCOME_TS_IRQ   (113)
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data income_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-static struct gpiod_lookup_table income_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on GPIO 0 */
-		GPIO_LOOKUP("gpio-pxa", GPIO0_INCOME_SD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		/* Write protect on GPIO 1 */
-		GPIO_LOOKUP("gpio-pxa", GPIO0_INCOME_SD_RO,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init income_mmc_init(void)
-{
-	gpiod_add_lookup_table(&income_mci_gpio_table);
-	pxa_set_mci_info(&income_mci_platform_data);
-}
-#else
-static inline void income_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static struct pxaohci_platform_data income_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init income_uhc_init(void)
-{
-	pxa_set_ohci_info(&income_ohci_info);
-}
-#else
-static inline void income_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * LED
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led income_gpio_leds[] = {
-	{
-		.name			= "income:green:leda",
-		.default_trigger	= "none",
-		.gpio			= GPIO54_INCOME_LED_A,
-		.active_low		= 1,
-	},
-	{
-		.name			= "income:green:ledb",
-		.default_trigger	= "none",
-		.gpio			= GPIO55_INCOME_LED_B,
-		.active_low		= 1,
-	}
-};
-
-static struct gpio_led_platform_data income_gpio_led_info = {
-	.leds		= income_gpio_leds,
-	.num_leds	= ARRAY_SIZE(income_gpio_leds),
-};
-
-static struct platform_device income_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &income_gpio_led_info,
-	}
-};
-
-static void __init income_led_init(void)
-{
-	platform_device_register(&income_leds);
-}
-#else
-static inline void income_led_init(void) {}
-#endif
-
-/******************************************************************************
- * I2C
- ******************************************************************************/
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct i2c_board_info __initdata income_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("ds1340", 0x68),
-	}, {
-		I2C_BOARD_INFO("lm75", 0x4f),
-	},
-};
-
-static void __init income_i2c_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	pxa27x_set_i2c_power_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
-}
-#else
-static inline void income_i2c_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info income_lcd_modes[] = {
-{
-	.pixclock	= 144700,
-	.xres		= 320,
-	.yres		= 240,
-	.bpp		= 32,
-	.depth		= 18,
-
-	.left_margin	= 10,
-	.right_margin	= 10,
-	.upper_margin	= 7,
-	.lower_margin	= 8,
-
-	.hsync_len	= 20,
-	.vsync_len	= 2,
-
-	.sync		= FB_SYNC_VERT_HIGH_ACT,
-},
-};
-
-static struct pxafb_mach_info income_lcd_screen = {
-	.modes		= income_lcd_modes,
-	.num_modes	= ARRAY_SIZE(income_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init income_lcd_init(void)
-{
-	pxa_set_fb_info(NULL, &income_lcd_screen);
-}
-#else
-static inline void income_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static struct pwm_lookup income_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data income_backlight_data = {
-	.max_brightness	= 0x3ff,
-	.dft_brightness	= 0x1ff,
-};
-
-static struct platform_device income_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &income_backlight_data,
-	},
-};
-
-static void __init income_pwm_init(void)
-{
-	pwm_add_table(income_pwm_lookup, ARRAY_SIZE(income_pwm_lookup));
-	platform_device_register(&income_backlight);
-}
-#else
-static inline void income_pwm_init(void) {}
-#endif
-
-void __init colibri_pxa270_income_boardinit(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	income_mmc_init();
-	income_uhc_init();
-	income_led_init();
-	income_i2c_init();
-	income_lcd_init();
-	income_pwm_init();
-}
-
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
deleted file mode 100644
index 5dc669752836..000000000000
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ /dev/null
@@ -1,330 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/colibri-pxa270.c
- *
- *  Support for Toradex PXA270 based Colibri module
- *  Daniel Mack <daniel@caiaq.de>
- *  Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/ucb1400.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach-types.h>
-#include <linux/sizes.h>
-
-#include <linux/platform_data/asoc-pxa.h>
-#include "colibri.h"
-#include "pxa27x.h"
-
-#include "devices.h"
-#include "generic.h"
-
-/******************************************************************************
- * Evaluation board MFP
- ******************************************************************************/
-#ifdef	 CONFIG_MACH_COLIBRI_EVALBOARD
-static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO0_GPIO,	/* SD detect */
-
-	/* FFUART */
-	GPIO39_FFUART_TXD,
-	GPIO34_FFUART_RXD,
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	GPIO119_USBH2_PWR,
-	GPIO120_USBH2_PEN,
-
-	/* PCMCIA */
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO49_nPWE,
-	GPIO48_nPOE,
-	GPIO57_nIOIS16,
-	GPIO56_nPWAIT,
-	GPIO104_PSKTSEL,
-	GPIO53_GPIO,	/* RESET */
-	GPIO83_GPIO,	/* BVD1 */
-	GPIO82_GPIO,	/* BVD2 */
-	GPIO1_GPIO,	/* READY */
-	GPIO84_GPIO,	/* DETECT */
-	GPIO107_GPIO,	/* PPEN */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-};
-#else
-static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {};
-#endif
-
-#ifdef	CONFIG_MACH_COLIBRI_PXA270_INCOME
-static mfp_cfg_t income_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO0_GPIO,	/* SD detect */
-	GPIO1_GPIO,	/* SD read-only */
-
-	/* FFUART */
-	GPIO39_FFUART_TXD,
-	GPIO34_FFUART_RXD,
-
-	/* BFUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO45_BTUART_RTS,
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* LED */
-	GPIO54_GPIO,	/* LED A */
-	GPIO55_GPIO,	/* LED B */
-};
-#else
-static mfp_cfg_t income_pin_config[] __initdata = {};
-#endif
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
-	/* Ethernet */
-	GPIO78_nCS_2,	/* Ethernet CS */
-	GPIO114_GPIO,	/* Ethernet IRQ */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO95_AC97_nRESET,
-	GPIO98_AC97_SYSCLK,
-	GPIO113_GPIO,	/* Touchscreen IRQ */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition colibri_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.offset =	0x00000000,
-		.size =		0x00040000,
-		.mask_flags =	MTD_WRITEABLE	/* force read-only */
-	}, {
-		.name =		"Kernel",
-		.offset =	0x00040000,
-		.size =		0x00400000,
-		.mask_flags =	0
-	}, {
-		.name =		"Rootfs",
-		.offset =	0x00440000,
-		.size =		MTDPART_SIZ_FULL,
-		.mask_flags =	0
-	}
-};
-
-static struct physmap_flash_data colibri_flash_data[] = {
-	{
-		.width		= 4,			/* bankwidth in bytes */
-		.parts		= colibri_partitions,
-		.nr_parts	= ARRAY_SIZE(colibri_partitions)
-	}
-};
-
-static struct resource colibri_pxa270_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device colibri_pxa270_flash_device = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev 	= {
-		.platform_data = colibri_flash_data,
-	},
-	.resource = &colibri_pxa270_flash_resource,
-	.num_resources = 1,
-};
-
-static void __init colibri_pxa270_nor_init(void)
-{
-	platform_device_register(&colibri_pxa270_flash_device);
-}
-#else
-static inline void colibri_pxa270_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Ethernet
- ******************************************************************************/
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource colibri_pxa270_dm9000_resources[] = {
-	{
-		.start	= PXA_CS2_PHYS,
-		.end	= PXA_CS2_PHYS + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= PXA_CS2_PHYS + 4,
-		.end	= PXA_CS2_PHYS + 4 + 500,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
-	},
-};
-
-static struct platform_device colibri_pxa270_dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(colibri_pxa270_dm9000_resources),
-	.resource	= colibri_pxa270_dm9000_resources,
-};
-
-static void __init colibri_pxa270_eth_init(void)
-{
-	platform_device_register(&colibri_pxa270_dm9000_device);
-}
-#else
-static inline void colibri_pxa270_eth_init(void) {}
-#endif
-
-/******************************************************************************
- * Audio and Touchscreen
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
-	.irq		= PXA_GPIO_TO_IRQ(GPIO113_COLIBRI_PXA270_TS_IRQ),
-};
-
-static struct platform_device colibri_pxa270_ucb1400_device = {
-	.name		= "ucb1400_core",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &colibri_pxa270_ucb1400_pdata,
-	},
-};
-
-static void __init colibri_pxa270_tsc_init(void)
-{
-	pxa_set_ac97_info(&colibri_pxa270_ac97_pdata);
-	platform_device_register(&colibri_pxa270_ucb1400_device);
-}
-#else
-static inline void colibri_pxa270_tsc_init(void) {}
-#endif
-
-static int colibri_pxa270_baseboard;
-core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444);
-
-static void __init colibri_pxa270_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
-
-	colibri_pxa270_nor_init();
-	colibri_pxa270_eth_init();
-	colibri_pxa270_tsc_init();
-
-	switch (colibri_pxa270_baseboard) {
-	case COLIBRI_EVALBOARD:
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(
-			colibri_pxa270_evalboard_pin_config));
-		colibri_evalboard_init();
-		break;
-	case COLIBRI_PXA270_INCOME:
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
-		colibri_pxa270_income_boardinit();
-		break;
-	default:
-		printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
-				colibri_pxa270_baseboard);
-	}
-
-	regulator_has_full_constraints();
-}
-
-/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
- * with the INCOME mach type or with COLIBRI and the kernel parameter
- * "colibri_pxa270_baseboard=1"
- */
-static void __init colibri_pxa270_income_init(void)
-{
-	colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME;
-	colibri_pxa270_init();
-}
-
-MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa270_init,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
-MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa270_income_init,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
deleted file mode 100644
index 11ca6c4795e7..000000000000
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ /dev/null
@@ -1,193 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  arch/arm/mach-pxa/colibri-pxa300.c
- *
- *  Support for Toradex PXA300/310 based Colibri module
- *
- *  Daniel Mack <daniel@caiaq.de>
- *  Matthias Meier <matthias.j.meier@gmx.net>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/soc/pxa/cpu.h>
-
-#include <asm/mach-types.h>
-#include <linux/sizes.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-
-#include "pxa300.h"
-#include "colibri.h"
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/asoc-pxa.h>
-
-#include "generic.h"
-#include "devices.h"
-
-
-#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
-static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
-	/* MMC */
-	GPIO7_MMC1_CLK,
-	GPIO14_MMC1_CMD,
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO13_GPIO,	/* GPIO13_COLIBRI_PXA300_SD_DETECT */
-
-	/* UHC */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-	GPIO77_USB_P3_1,
-	GPIO78_USB_P3_2,
-	GPIO79_USB_P3_3,
-	GPIO80_USB_P3_4,
-	GPIO81_USB_P3_5,
-	GPIO82_USB_P3_6,
-
-	/* I2C */
-	GPIO21_I2C_SCL,
-	GPIO22_I2C_SDA,
-};
-#else
-static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {};
-#endif
-
-#if defined(CONFIG_AX88796)
-#define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO26_GPIO)
-/*
- * Asix AX88796 Ethernet
- */
-static struct ax_plat_data colibri_asix_platdata = {
-	.flags		= 0, /* defined later */
-	.wordlength	= 2,
-};
-
-static struct resource colibri_asix_resource[] = {
-	[0] = {
-		.start = PXA3xx_CS2_PHYS,
-		.end   = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
-	}
-};
-
-static struct platform_device asix_device = {
-	.name		= "ax88796",
-	.id		= 0,
-	.num_resources 	= ARRAY_SIZE(colibri_asix_resource),
-	.resource	= colibri_asix_resource,
-	.dev		= {
-		.platform_data = &colibri_asix_platdata
-	}
-};
-
-static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = {
-	GPIO1_nCS2,			/* AX88796 chip select */
-	GPIO26_GPIO | MFP_PULL_HIGH	/* AX88796 IRQ */
-};
-
-static void __init colibri_pxa300_init_eth(void)
-{
-	colibri_pxa3xx_init_eth(&colibri_asix_platdata);
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config));
-	platform_device_register(&asix_device);
-}
-#else
-static inline void __init colibri_pxa300_init_eth(void) {}
-#endif /* CONFIG_AX88796 */
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static mfp_cfg_t colibri_pxa300_lcd_pin_config[] __initdata = {
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO70_LCD_LDD_16,
-	GPIO71_LCD_LDD_17,
-	GPIO62_LCD_CS_N,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-	GPIO76_LCD_VSYNC,
-};
-
-static void __init colibri_pxa300_init_lcd(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_lcd_pin_config));
-}
-
-#else
-static inline void colibri_pxa300_init_lcd(void) {}
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
-
-#if defined(CONFIG_SND_AC97_CODEC) || defined(CONFIG_SND_AC97_CODEC_MODULE)
-static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
-	GPIO24_AC97_SYSCLK,
-	GPIO23_AC97_nACRESET,
-	GPIO25_AC97_SDATA_IN_0,
-	GPIO27_AC97_SDATA_OUT,
-	GPIO28_AC97_SYNC,
-	GPIO29_AC97_BITCLK
-};
-
-static inline void __init colibri_pxa310_init_ac97(void)
-{
-	/* no AC97 codec on Colibri PXA300 */
-	if (!cpu_is_pxa310())
-		return;
-
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa310_ac97_pin_config));
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void colibri_pxa310_init_ac97(void) {}
-#endif
-
-void __init colibri_pxa300_init(void)
-{
-	colibri_pxa300_init_eth();
-	colibri_pxa3xx_init_nand();
-	colibri_pxa300_init_lcd();
-	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
-	colibri_pxa310_init_ac97();
-
-	/* Evalboard init */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_evalboard_pin_config));
-	colibri_evalboard_init();
-}
-
-MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa300_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
deleted file mode 100644
index 1a59056e181e..000000000000
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ /dev/null
@@ -1,264 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  arch/arm/mach-pxa/colibri-pxa320.c
- *
- *  Support for Toradex PXA320/310 based Colibri module
- *
- *  Daniel Mack <daniel@caiaq.de>
- *  Matthias Meier <matthias.j.meier@gmx.net>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-types.h>
-#include <linux/sizes.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-
-#include "pxa320.h"
-#include "colibri.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/asoc-pxa.h>
-#include "pxa27x-udc.h"
-#include "udc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-#ifdef	CONFIG_MACH_COLIBRI_EVALBOARD
-static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
-	/* MMC */
-	GPIO22_MMC1_CLK,
-	GPIO23_MMC1_CMD,
-	GPIO18_MMC1_DAT0,
-	GPIO19_MMC1_DAT1,
-	GPIO20_MMC1_DAT2,
-	GPIO21_MMC1_DAT3,
-	GPIO28_GPIO,	/* SD detect */
-
-	/* UART 1 configuration (may be set by bootloader) */
-	GPIO99_UART1_CTS,
-	GPIO104_UART1_RTS,
-	GPIO97_UART1_RXD,
-	GPIO98_UART1_TXD,
-	GPIO101_UART1_DTR,
-	GPIO103_UART1_DSR,
-	GPIO100_UART1_DCD,
-	GPIO102_UART1_RI,
-
-	/* UART 2 configuration */
-	GPIO109_UART2_CTS,
-	GPIO112_UART2_RTS,
-	GPIO110_UART2_RXD,
-	GPIO111_UART2_TXD,
-
-	/* UART 3 configuration */
-	GPIO30_UART3_RXD,
-	GPIO31_UART3_TXD,
-
-	/* UHC */
-	GPIO2_2_USBH_PEN,
-	GPIO3_2_USBH_PWR,
-
-	/* I2C */
-	GPIO32_I2C_SCL,
-	GPIO33_I2C_SDA,
-
-	/* PCMCIA */
-	MFP_CFG(GPIO59, AF7),	/* PRST ; AF7 to tristate */
-	MFP_CFG(GPIO61, AF7),	/* PCE1 ; AF7 to tristate */
-	MFP_CFG(GPIO60, AF7),	/* PCE2 ; AF7 to tristate */
-	MFP_CFG(GPIO62, AF7),	/* PCD ; AF7 to tristate */
-	MFP_CFG(GPIO56, AF7),	/* PSKTSEL ; AF7 to tristate */
-	GPIO27_GPIO,		/* RDnWR ; input/tristate */
-	GPIO50_GPIO,		/* PREG ; input/tristate */
-	GPIO2_RDY,
-	GPIO5_NPIOR,
-	GPIO6_NPIOW,
-	GPIO7_NPIOS16,
-	GPIO8_NPWAIT,
-	GPIO29_GPIO,		/* PRDY (READY GPIO) */
-	GPIO57_GPIO,		/* PPEN (POWER GPIO) */
-	GPIO81_GPIO,		/* PCD (DETECT GPIO) */
-	GPIO77_GPIO,		/* PRST (RESET GPIO) */
-	GPIO53_GPIO,		/* PBVD1 */
-	GPIO79_GPIO,		/* PBVD2 */
-	GPIO54_GPIO,		/* POE */
-};
-#else
-static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {};
-#endif
-
-#if defined(CONFIG_AX88796)
-#define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO36_GPIO)
-/*
- * Asix AX88796 Ethernet
- */
-static struct ax_plat_data colibri_asix_platdata = {
-	.flags		= 0, /* defined later */
-	.wordlength	= 2,
-};
-
-static struct resource colibri_asix_resource[] = {
-	[0] = {
-		.start = PXA3xx_CS2_PHYS,
-		.end   = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
-	}
-};
-
-static struct platform_device asix_device = {
-	.name		= "ax88796",
-	.id		= 0,
-	.num_resources 	= ARRAY_SIZE(colibri_asix_resource),
-	.resource	= colibri_asix_resource,
-	.dev		= {
-		.platform_data = &colibri_asix_platdata
-	}
-};
-
-static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = {
-	GPIO3_nCS2,			/* AX88796 chip select */
-	GPIO36_GPIO | MFP_PULL_HIGH	/* AX88796 IRQ */
-};
-
-static void __init colibri_pxa320_init_eth(void)
-{
-	colibri_pxa3xx_init_eth(&colibri_asix_platdata);
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config));
-	platform_device_register(&asix_device);
-}
-#else
-static inline void __init colibri_pxa320_init_eth(void) {}
-#endif /* CONFIG_AX88796 */
-
-#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", MFP_PIN_GPIO96,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device colibri_pxa320_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-static void colibri_pxa320_udc_command(int cmd)
-{
-	if (cmd == PXA2XX_UDC_CMD_CONNECT)
-		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
-	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
-		UP2OCR = UP2OCR_HXOE;
-}
-
-static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = {
-	.udc_command		= colibri_pxa320_udc_command,
-	.gpio_pullup		= -1,
-};
-
-static void __init colibri_pxa320_init_udc(void)
-{
-	pxa_set_udc_info(&colibri_pxa320_udc_info);
-	gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
-	platform_device_register(&colibri_pxa320_gpio_vbus);
-}
-#else
-static inline void colibri_pxa320_init_udc(void) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = {
-	GPIO6_2_LCD_LDD_0,
-	GPIO7_2_LCD_LDD_1,
-	GPIO8_2_LCD_LDD_2,
-	GPIO9_2_LCD_LDD_3,
-	GPIO10_2_LCD_LDD_4,
-	GPIO11_2_LCD_LDD_5,
-	GPIO12_2_LCD_LDD_6,
-	GPIO13_2_LCD_LDD_7,
-	GPIO63_LCD_LDD_8,
-	GPIO64_LCD_LDD_9,
-	GPIO65_LCD_LDD_10,
-	GPIO66_LCD_LDD_11,
-	GPIO67_LCD_LDD_12,
-	GPIO68_LCD_LDD_13,
-	GPIO69_LCD_LDD_14,
-	GPIO70_LCD_LDD_15,
-	GPIO71_LCD_LDD_16,
-	GPIO72_LCD_LDD_17,
-	GPIO73_LCD_CS_N,
-	GPIO74_LCD_VSYNC,
-	GPIO14_2_LCD_FCLK,
-	GPIO15_2_LCD_LCLK,
-	GPIO16_2_LCD_PCLK,
-	GPIO17_2_LCD_BIAS,
-};
-
-static void __init colibri_pxa320_init_lcd(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_lcd_pin_config));
-}
-#else
-static inline void colibri_pxa320_init_lcd(void) {}
-#endif
-
-#if	defined(CONFIG_SND_AC97_CODEC) || \
-	defined(CONFIG_SND_AC97_CODEC_MODULE)
-static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
-	GPIO34_AC97_SYSCLK,
-	GPIO35_AC97_SDATA_IN_0,
-	GPIO37_AC97_SDATA_OUT,
-	GPIO38_AC97_SYNC,
-	GPIO39_AC97_BITCLK,
-	GPIO40_AC97_nACRESET
-};
-
-static inline void __init colibri_pxa320_init_ac97(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_ac97_pin_config));
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void colibri_pxa320_init_ac97(void) {}
-#endif
-
-void __init colibri_pxa320_init(void)
-{
-	colibri_pxa320_init_eth();
-	colibri_pxa3xx_init_nand();
-	colibri_pxa320_init_lcd();
-	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
-	colibri_pxa320_init_ac97();
-	colibri_pxa320_init_udc();
-
-	/* Evalboard init */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_evalboard_pin_config));
-	colibri_evalboard_init();
-}
-
-MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa320_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
deleted file mode 100644
index 77d6ef5fa42d..000000000000
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  arch/arm/mach-pxa/colibri-pxa3xx.c
- *
- *  Common functions for all Toradex PXA3xx modules
- *
- *  Daniel Mack <daniel@caiaq.de>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/etherdevice.h>
-#include <asm/mach-types.h>
-#include <linux/sizes.h>
-#include <asm/system_info.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include "pxa3xx-regs.h"
-#include "mfp-pxa300.h"
-#include "colibri.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-
-#include "generic.h"
-#include "devices.h"
-
-#if defined(CONFIG_AX88796)
-#define ETHER_ADDR_LEN 6
-static u8 ether_mac_addr[ETHER_ADDR_LEN];
-
-void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data)
-{
-	int i;
-	u64 serial = ((u64) system_serial_high << 32) | system_serial_low;
-
-	/*
-	 * If the bootloader passed in a serial boot tag, which contains a
-	 * valid ethernet MAC, pass it to the interface. Toradex ships the
-	 * modules with their own bootloader which provides a valid MAC
-	 * this way.
-	 */
-
-	for (i = 0; i < ETHER_ADDR_LEN; i++) {
-		ether_mac_addr[i] = serial & 0xff;
-		serial >>= 8;
-	}
-
-	if (is_valid_ether_addr(ether_mac_addr)) {
-		plat_data->flags |= AXFLG_MAC_FROMPLATFORM;
-		plat_data->mac_addr = ether_mac_addr;
-		printk(KERN_INFO "%s(): taking MAC from serial boot tag\n",
-			__func__);
-	} else {
-		plat_data->flags |= AXFLG_MAC_FROMDEV;
-		printk(KERN_INFO "%s(): no valid serial boot tag found, "
-			"taking MAC from device\n", __func__);
-	}
-}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static int lcd_bl_pin;
-
-/*
- * LCD panel (Sharp LQ043T3DX02)
- */
-static void colibri_lcd_backlight(int on)
-{
-	gpio_set_value(lcd_bl_pin, !!on);
-}
-
-static struct pxafb_mode_info sharp_lq43_mode = {
-	.pixclock	= 101936,
-	.xres		= 480,
-	.yres		= 272,
-	.bpp		= 32,
-	.depth		= 18,
-	.hsync_len      = 41,
-	.left_margin    = 2,
-	.right_margin   = 2,
-	.vsync_len      = 10,
-	.upper_margin   = 2,
-	.lower_margin   = 2,
-	.sync	   	= 0,
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info sharp_lq43_info = {
-	.modes		= &sharp_lq43_mode,
-	.num_modes	= 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lcd_conn	= LCD_COLOR_TFT_18BPP,
-	.pxafb_backlight_power = colibri_lcd_backlight,
-};
-
-void __init colibri_pxa3xx_init_lcd(int bl_pin)
-{
-	lcd_bl_pin = bl_pin;
-	gpio_request(bl_pin, "lcd backlight");
-	gpio_direction_output(bl_pin, 0);
-	pxa_set_fb_info(NULL, &sharp_lq43_info);
-}
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-static struct mtd_partition colibri_nand_partitions[] = {
-	{
-		.name        = "bootloader",
-		.offset      = 0,
-		.size        = SZ_512K,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name        = "kernel",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_4M,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name        = "reserved",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_1M,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name        = "fs",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct pxa3xx_nand_platform_data colibri_nand_info = {
-	.keep_config	= 1,
-	.parts		= colibri_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(colibri_nand_partitions),
-};
-
-void __init colibri_pxa3xx_init_nand(void)
-{
-	pxa3xx_set_nand_info(&colibri_nand_info);
-}
-#endif
-
diff --git a/arch/arm/mach-pxa/colibri.h b/arch/arm/mach-pxa/colibri.h
deleted file mode 100644
index 01a46f36cc1f..000000000000
--- a/arch/arm/mach-pxa/colibri.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _COLIBRI_H_
-#define _COLIBRI_H_
-
-#include <net/ax88796.h>
-#include "mfp.h"
-
-/*
- * base board glue for PXA270 module
- */
-
-enum {
-	COLIBRI_EVALBOARD = 0,
-	COLIBRI_PXA270_INCOME,
-};
-
-#if defined(CONFIG_MACH_COLIBRI_EVALBOARD)
-extern void colibri_evalboard_init(void);
-#else
-static inline void colibri_evalboard_init(void) {}
-#endif
-
-#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
-extern void colibri_pxa270_income_boardinit(void);
-#else
-static inline void colibri_pxa270_income_boardinit(void) {}
-#endif
-
-/*
- * common settings for all modules
- */
-
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
-#else
-static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-extern void colibri_pxa3xx_init_lcd(int bl_pin);
-#else
-static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
-#endif
-
-#if defined(CONFIG_AX88796)
-extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-extern void colibri_pxa3xx_init_nand(void);
-#else
-static inline void colibri_pxa3xx_init_nand(void) {}
-#endif
-
-/* physical memory regions */
-#define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
-
-/* GPIO definitions for Colibri PXA270 */
-#define GPIO114_COLIBRI_PXA270_ETH_IRQ	114
-#define GPIO0_COLIBRI_PXA270_SD_DETECT	0
-#define GPIO113_COLIBRI_PXA270_TS_IRQ	113
-
-/* GPIO definitions for Colibri PXA300/310 */
-#define GPIO13_COLIBRI_PXA300_SD_DETECT	13
-
-/* GPIO definitions for Colibri PXA320 */
-#define GPIO28_COLIBRI_PXA320_SD_DETECT	28
-
-#endif /* _COLIBRI_H_ */
-
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
deleted file mode 100644
index 5738496717e2..000000000000
--- a/arch/arm/mach-pxa/corgi.c
+++ /dev/null
@@ -1,826 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Support for Sharp SL-C7xx PDAs
- * Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches/lubbock.c
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>	/* symbol_get ; symbol_put */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/mmc/host.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pm.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/backlight.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/io.h>
-#include <linux/regulator/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/corgi_lcd.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mtd/sharpsl.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/gpio_keys.h>
-#include <linux/memblock.h>
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "pxa25x.h"
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include "udc.h"
-#include "corgi.h"
-#include "sharpsl_pm.h"
-
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/scoop.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long corgi_pin_config[] __initdata = {
-	/* Static Memory I/O */
-	GPIO78_nCS_2,	/* w100fb */
-	GPIO80_nCS_4,	/* scoop */
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO24_GPIO,	/* CORGI_GPIO_ADS7846_CS - SFRM as chip select */
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO32_I2S_SYSCLK,
-
-	/* Infra-Red */
-	GPIO47_FICP_TXD,
-	GPIO46_FICP_RXD,
-
-	/* FFUART */
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-	GPIO39_FFUART_TXD,
-	GPIO37_FFUART_DSR,
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* GPIO Matrix Keypad */
-	GPIO66_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 0 */
-	GPIO67_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 1 */
-	GPIO68_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 2 */
-	GPIO69_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 3 */
-	GPIO70_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 4 */
-	GPIO71_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 5 */
-	GPIO72_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 6 */
-	GPIO73_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 7 */
-	GPIO74_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 8 */
-	GPIO75_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 9 */
-	GPIO76_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 10 */
-	GPIO77_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 11 */
-	GPIO58_GPIO,	/* row 0 */
-	GPIO59_GPIO,	/* row 1 */
-	GPIO60_GPIO,	/* row 2 */
-	GPIO61_GPIO,	/* row 3 */
-	GPIO62_GPIO,	/* row 4 */
-	GPIO63_GPIO,	/* row 5 */
-	GPIO64_GPIO,	/* row 6 */
-	GPIO65_GPIO,	/* row 7 */
-
-	/* GPIO */
-	GPIO9_GPIO,				/* CORGI_GPIO_nSD_DETECT */
-	GPIO7_GPIO,				/* CORGI_GPIO_nSD_WP */
-	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_MAIN_BAT_{LOW,COVER} */
-	GPIO13_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_LED_ORANGE */
-	GPIO21_GPIO,				/* CORGI_GPIO_ADC_TEMP */
-	GPIO22_GPIO,				/* CORGI_GPIO_IR_ON */
-	GPIO33_GPIO,				/* CORGI_GPIO_SD_PWR */
-	GPIO38_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_CHRG_ON */
-	GPIO43_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_CHRG_UKN */
-	GPIO44_GPIO,				/* CORGI_GPIO_HSYNC */
-
-	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_KEY_INT */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* CORGI_GPIO_AC_IN */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_WAKEUP */
-};
-
-/*
- * Corgi SCOOP Device
- */
-static struct resource corgi_scoop_resources[] = {
-	[0] = {
-		.start		= 0x10800000,
-		.end		= 0x10800fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config corgi_scoop_setup = {
-	.io_dir 	= CORGI_SCOOP_IO_DIR,
-	.io_out		= CORGI_SCOOP_IO_OUT,
-	.gpio_base	= CORGI_SCOOP_GPIO_BASE,
-};
-
-struct platform_device corgiscoop_device = {
-	.name		= "sharp-scoop",
-	.id		= -1,
-	.dev		= {
- 		.platform_data	= &corgi_scoop_setup,
-	},
-	.num_resources	= ARRAY_SIZE(corgi_scoop_resources),
-	.resource	= corgi_scoop_resources,
-};
-
-static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
-{
-	.dev        = &corgiscoop_device.dev,
-	.irq        = CORGI_IRQ_GPIO_CF_IRQ,
-	.cd_irq     = CORGI_IRQ_GPIO_CF_CD,
-	.cd_irq_str = "PCMCIA0 CD",
-},
-};
-
-static struct scoop_pcmcia_config corgi_pcmcia_config = {
-	.devs         = &corgi_pcmcia_scoop[0],
-	.num_devs     = 1,
-};
-
-static struct w100_mem_info corgi_fb_mem = {
-	.ext_cntl          = 0x00040003,
-	.sdram_mode_reg    = 0x00650021,
-	.ext_timing_cntl   = 0x10002a4a,
-	.io_cntl           = 0x7ff87012,
-	.size              = 0x1fffff,
-};
-
-static struct w100_gen_regs corgi_fb_regs = {
-	.lcd_format    = 0x00000003,
-	.lcdd_cntl1    = 0x01CC0000,
-	.lcdd_cntl2    = 0x0003FFFF,
-	.genlcd_cntl1  = 0x00FFFF0D,
-	.genlcd_cntl2  = 0x003F3003,
-	.genlcd_cntl3  = 0x000102aa,
-};
-
-static struct w100_gpio_regs corgi_fb_gpio = {
-	.init_data1   = 0x000000bf,
-	.init_data2   = 0x00000000,
-	.gpio_dir1    = 0x00000000,
-	.gpio_oe1     = 0x03c0feff,
-	.gpio_dir2    = 0x00000000,
-	.gpio_oe2     = 0x00000000,
-};
-
-static struct w100_mode corgi_fb_modes[] = {
-{
-	.xres            = 480,
-	.yres            = 640,
-	.left_margin     = 0x56,
-	.right_margin    = 0x55,
-	.upper_margin    = 0x03,
-	.lower_margin    = 0x00,
-	.crtc_ss         = 0x82360056,
-	.crtc_ls         = 0xA0280000,
-	.crtc_gs         = 0x80280028,
-	.crtc_vpos_gs    = 0x02830002,
-	.crtc_rev        = 0x00400008,
-	.crtc_dclk       = 0xA0000000,
-	.crtc_gclk       = 0x8015010F,
-	.crtc_goe        = 0x80100110,
-	.crtc_ps1_active = 0x41060010,
-	.pll_freq        = 75,
-	.fast_pll_freq   = 100,
-	.sysclk_src      = CLK_SRC_PLL,
-	.sysclk_divider  = 0,
-	.pixclk_src      = CLK_SRC_PLL,
-	.pixclk_divider  = 2,
-	.pixclk_divider_rotated = 6,
-},{
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 0x27,
-	.right_margin    = 0x2e,
-	.upper_margin    = 0x01,
-	.lower_margin    = 0x00,
-	.crtc_ss         = 0x81170027,
-	.crtc_ls         = 0xA0140000,
-	.crtc_gs         = 0xC0140014,
-	.crtc_vpos_gs    = 0x00010141,
-	.crtc_rev        = 0x00400008,
-	.crtc_dclk       = 0xA0000000,
-	.crtc_gclk       = 0x8015010F,
-	.crtc_goe        = 0x80100110,
-	.crtc_ps1_active = 0x41060010,
-	.pll_freq        = 0,
-	.fast_pll_freq   = 0,
-	.sysclk_src      = CLK_SRC_XTAL,
-	.sysclk_divider  = 0,
-	.pixclk_src      = CLK_SRC_XTAL,
-	.pixclk_divider  = 1,
-	.pixclk_divider_rotated = 1,
-},
-
-};
-
-static struct w100fb_mach_info corgi_fb_info = {
-	.init_mode  = INIT_MODE_ROTATED,
-	.mem        = &corgi_fb_mem,
-	.regs       = &corgi_fb_regs,
-	.modelist   = &corgi_fb_modes[0],
-	.num_modes  = 2,
-	.gpio       = &corgi_fb_gpio,
-	.xtal_freq  = 12500000,
-	.xtal_dbl   = 0,
-};
-
-static struct resource corgi_fb_resources[] = {
-	[0] = {
-		.start   = 0x08000000,
-		.end     = 0x08ffffff,
-		.flags   = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device corgifb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.num_resources	= ARRAY_SIZE(corgi_fb_resources),
-	.resource	= corgi_fb_resources,
-	.dev            = {
-		.platform_data = &corgi_fb_info,
-	},
-
-};
-
-/*
- * Corgi Keyboard Device
- */
-#define CORGI_KEY_CALENDER	KEY_F1
-#define CORGI_KEY_ADDRESS	KEY_F2
-#define CORGI_KEY_FN		KEY_F3
-#define CORGI_KEY_CANCEL	KEY_F4
-#define CORGI_KEY_OFF		KEY_SUSPEND
-#define CORGI_KEY_EXOK		KEY_F5
-#define CORGI_KEY_EXCANCEL	KEY_F6
-#define CORGI_KEY_EXJOGDOWN	KEY_F7
-#define CORGI_KEY_EXJOGUP	KEY_F8
-#define CORGI_KEY_JAP1		KEY_LEFTCTRL
-#define CORGI_KEY_JAP2		KEY_LEFTALT
-#define CORGI_KEY_MAIL		KEY_F10
-#define CORGI_KEY_OK		KEY_F11
-#define CORGI_KEY_MENU		KEY_F12
-
-static const uint32_t corgikbd_keymap[] = {
-	KEY(0, 1, KEY_1),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_5),
-	KEY(0, 4, KEY_6),
-	KEY(0, 5, KEY_7),
-	KEY(0, 6, KEY_9),
-	KEY(0, 7, KEY_0),
-	KEY(0, 8, KEY_BACKSPACE),
-	KEY(1, 1, KEY_2),
-	KEY(1, 2, KEY_4),
-	KEY(1, 3, KEY_R),
-	KEY(1, 4, KEY_Y),
-	KEY(1, 5, KEY_8),
-	KEY(1, 6, KEY_I),
-	KEY(1, 7, KEY_O),
-	KEY(1, 8, KEY_P),
-	KEY(2, 0, KEY_TAB),
-	KEY(2, 1, KEY_Q),
-	KEY(2, 2, KEY_E),
-	KEY(2, 3, KEY_T),
-	KEY(2, 4, KEY_G),
-	KEY(2, 5, KEY_U),
-	KEY(2, 6, KEY_J),
-	KEY(2, 7, KEY_K),
-	KEY(3, 0, CORGI_KEY_CALENDER),
-	KEY(3, 1, KEY_W),
-	KEY(3, 2, KEY_S),
-	KEY(3, 3, KEY_F),
-	KEY(3, 4, KEY_V),
-	KEY(3, 5, KEY_H),
-	KEY(3, 6, KEY_M),
-	KEY(3, 7, KEY_L),
-	KEY(3, 9, KEY_RIGHTSHIFT),
-	KEY(4, 0, CORGI_KEY_ADDRESS),
-	KEY(4, 1, KEY_A),
-	KEY(4, 2, KEY_D),
-	KEY(4, 3, KEY_C),
-	KEY(4, 4, KEY_B),
-	KEY(4, 5, KEY_N),
-	KEY(4, 6, KEY_DOT),
-	KEY(4, 8, KEY_ENTER),
-	KEY(4, 10, KEY_LEFTSHIFT),
-	KEY(5, 0, CORGI_KEY_MAIL),
-	KEY(5, 1, KEY_Z),
-	KEY(5, 2, KEY_X),
-	KEY(5, 3, KEY_MINUS),
-	KEY(5, 4, KEY_SPACE),
-	KEY(5, 5, KEY_COMMA),
-	KEY(5, 7, KEY_UP),
-	KEY(5, 11, CORGI_KEY_FN),
-	KEY(6, 0, KEY_SYSRQ),
-	KEY(6, 1, CORGI_KEY_JAP1),
-	KEY(6, 2, CORGI_KEY_JAP2),
-	KEY(6, 3, CORGI_KEY_CANCEL),
-	KEY(6, 4, CORGI_KEY_OK),
-	KEY(6, 5, CORGI_KEY_MENU),
-	KEY(6, 6, KEY_LEFT),
-	KEY(6, 7, KEY_DOWN),
-	KEY(6, 8, KEY_RIGHT),
-	KEY(7, 0, CORGI_KEY_OFF),
-	KEY(7, 1, CORGI_KEY_EXOK),
-	KEY(7, 2, CORGI_KEY_EXCANCEL),
-	KEY(7, 3, CORGI_KEY_EXJOGDOWN),
-	KEY(7, 4, CORGI_KEY_EXJOGUP),
-};
-
-static struct matrix_keymap_data corgikbd_keymap_data = {
-	.keymap		= corgikbd_keymap,
-	.keymap_size	= ARRAY_SIZE(corgikbd_keymap),
-};
-
-static const int corgikbd_row_gpios[] =
-		{ 58, 59, 60, 61, 62, 63, 64, 65 };
-static const int corgikbd_col_gpios[] =
-		{ 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 };
-
-static struct matrix_keypad_platform_data corgikbd_pdata = {
-	.keymap_data		= &corgikbd_keymap_data,
-	.row_gpios		= corgikbd_row_gpios,
-	.col_gpios		= corgikbd_col_gpios,
-	.num_row_gpios		= ARRAY_SIZE(corgikbd_row_gpios),
-	.num_col_gpios		= ARRAY_SIZE(corgikbd_col_gpios),
-	.col_scan_delay_us	= 10,
-	.debounce_ms		= 10,
-	.wakeup			= 1,
-};
-
-static struct platform_device corgikbd_device = {
-	.name		= "matrix-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &corgikbd_pdata,
-	},
-};
-
-static struct gpio_keys_button corgi_gpio_keys[] = {
-	{
-		.type	= EV_SW,
-		.code	= SW_LID,
-		.gpio	= CORGI_GPIO_SWA,
-		.desc	= "Lid close switch",
-		.debounce_interval = 500,
-	},
-	{
-		.type	= EV_SW,
-		.code	= SW_TABLET_MODE,
-		.gpio	= CORGI_GPIO_SWB,
-		.desc	= "Tablet mode switch",
-		.debounce_interval = 500,
-	},
-	{
-		.type	= EV_SW,
-		.code	= SW_HEADPHONE_INSERT,
-		.gpio	= CORGI_GPIO_AK_INT,
-		.desc	= "HeadPhone insert",
-		.debounce_interval = 500,
-	},
-};
-
-static struct gpio_keys_platform_data corgi_gpio_keys_platform_data = {
-	.buttons	= corgi_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(corgi_gpio_keys),
-	.poll_interval	= 250,
-};
-
-static struct platform_device corgi_gpio_keys_device = {
-	.name	= "gpio-keys-polled",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &corgi_gpio_keys_platform_data,
-	},
-};
-
-/*
- * Corgi LEDs
- */
-static struct gpio_led corgi_gpio_leds[] = {
-	{
-		.name			= "corgi:amber:charge",
-		.default_trigger	= "sharpsl-charge",
-		.gpio			= CORGI_GPIO_LED_ORANGE,
-	},
-	{
-		.name			= "corgi:green:mail",
-		.default_trigger	= "nand-disk",
-		.gpio			= CORGI_GPIO_LED_GREEN,
-	},
-};
-
-static struct gpio_led_platform_data corgi_gpio_leds_info = {
-	.leds		= corgi_gpio_leds,
-	.num_leds	= ARRAY_SIZE(corgi_gpio_leds),
-};
-
-static struct platform_device corgiled_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &corgi_gpio_leds_info,
-	},
-};
-
-static struct gpiod_lookup_table corgi_audio_gpio_table = {
-	.dev_id = "corgi-audio",
-	.table = {
-		GPIO_LOOKUP("sharp-scoop",
-			    CORGI_GPIO_MUTE_L - CORGI_SCOOP_GPIO_BASE,
-			    "mute-l", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop",
-			    CORGI_GPIO_MUTE_R - CORGI_SCOOP_GPIO_BASE,
-			    "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop",
-			    CORGI_GPIO_APM_ON - CORGI_SCOOP_GPIO_BASE,
-			    "apm-on", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop",
-			    CORGI_GPIO_MIC_BIAS - CORGI_SCOOP_GPIO_BASE,
-			    "mic-bias", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/*
- * Corgi Audio
- */
-static struct platform_device corgi_audio_device = {
-	.name	= "corgi-audio",
-	.id	= -1,
-};
-
-/*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-static struct pxamci_platform_data corgi_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table corgi_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on GPIO 9 */
-		GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_nSD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		/* Write protect on GPIO 7 */
-		GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_nSD_WP,
-			    "wp", GPIO_ACTIVE_LOW),
-		/* Power on GPIO 33 */
-		GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_SD_PWR,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/*
- * Irda
- */
-static struct pxaficp_platform_data corgi_ficp_platform_data = {
-	.gpio_pwdown		= CORGI_GPIO_IR_ON,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-
-/*
- * USB Device Controller
- */
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	/* no connect GPIO; corgi can't tell connection status */
-	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
-};
-
-#if IS_ENABLED(CONFIG_SPI_PXA2XX)
-static struct pxa2xx_spi_controller corgi_spi_info = {
-	.num_chipselect	= 3,
-};
-
-static struct gpiod_lookup_table corgi_spi_gpio_table = {
-	.dev_id = "spi1",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_MAX1111_CS, "cs", 2, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void corgi_wait_for_hsync(void)
-{
-	while (gpio_get_value(CORGI_GPIO_HSYNC))
-		cpu_relax();
-
-	while (!gpio_get_value(CORGI_GPIO_HSYNC))
-		cpu_relax();
-}
-
-static struct ads7846_platform_data corgi_ads7846_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.gpio_pendown		= CORGI_GPIO_TP_INT,
-	.wait_for_sync		= corgi_wait_for_hsync,
-};
-
-static void corgi_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
-
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
-
-static struct gpiod_lookup_table corgi_lcdcon_gpio_table = {
-	.dev_id = "spi1.1",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_BACKLIGHT_CONT,
-			    "BL_CONT", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct corgi_lcd_platform_data corgi_lcdcon_info = {
-	.init_mode		= CORGI_LCD_MODE_VGA,
-	.max_intensity		= 0x2f,
-	.default_intensity	= 0x1f,
-	.limit_mask		= 0x0b,
-	.kick_battery		= corgi_bl_kick_battery,
-};
-
-static struct spi_board_info corgi_spi_devices[] = {
-	{
-		.modalias	= "ads7846",
-		.max_speed_hz	= 1200000,
-		.bus_num	= 1,
-		.chip_select	= 0,
-		.platform_data	= &corgi_ads7846_info,
-		.irq		= PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT),
-	}, {
-		.modalias	= "corgi-lcd",
-		.max_speed_hz	= 50000,
-		.bus_num	= 1,
-		.chip_select	= 1,
-		.platform_data	= &corgi_lcdcon_info,
-	}, {
-		.modalias	= "max1111",
-		.max_speed_hz	= 450000,
-		.bus_num	= 1,
-		.chip_select	= 2,
-	},
-};
-
-static void __init corgi_init_spi(void)
-{
-	gpiod_add_lookup_table(&corgi_spi_gpio_table);
-	pxa2xx_set_spi_info(1, &corgi_spi_info);
-	gpiod_add_lookup_table(&corgi_lcdcon_gpio_table);
-	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
-}
-#else
-static inline void corgi_init_spi(void) {}
-#endif
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr sharpsl_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static const char * const probes[] = {
-	"cmdlinepart",
-	"ofpart",
-	"sharpslpart",
-	NULL,
-};
-
-static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
-	.badblock_pattern	= &sharpsl_bbt,
-	.part_parsers		= probes,
-};
-
-static struct resource sharpsl_nand_resources[] = {
-	{
-		.start	= 0x0C000000,
-		.end	= 0x0C000FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_nand_device = {
-	.name		= "sharpsl-nand",
-	.id		= -1,
-	.resource	= sharpsl_nand_resources,
-	.num_resources	= ARRAY_SIZE(sharpsl_nand_resources),
-	.dev.platform_data	= &sharpsl_nand_platform_data,
-};
-
-static struct mtd_partition sharpsl_rom_parts[] = {
-	{
-		.name	="Boot PROM Filesystem",
-		.offset	= 0x00120000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data sharpsl_rom_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
-	.parts		= sharpsl_rom_parts,
-};
-
-static struct resource sharpsl_rom_resources[] = {
-	{
-		.start	= 0x00000000,
-		.end	= 0x007fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.resource = sharpsl_rom_resources,
-	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
-	.dev.platform_data = &sharpsl_rom_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&corgiscoop_device,
-	&corgifb_device,
-	&corgi_gpio_keys_device,
-	&corgikbd_device,
-	&corgiled_device,
-	&corgi_audio_device,
-	&sharpsl_nand_device,
-	&sharpsl_rom_device,
-};
-
-static struct i2c_board_info __initdata corgi_i2c_devices[] = {
-	{ I2C_BOARD_INFO("wm8731", 0x1b) },
-};
-
-static void corgi_poweroff(void)
-{
-	if (!machine_is_corgi())
-		/* Green LED off tells the bootloader to halt */
-		gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
-
-	pxa_restart(REBOOT_HARD, NULL);
-}
-
-static void corgi_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (!machine_is_corgi())
-		/* Green LED on tells the bootloader to reboot */
-		gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
-
-	pxa_restart(REBOOT_HARD, cmd);
-}
-
-static void __init corgi_init(void)
-{
-	pm_power_off = corgi_poweroff;
-
-	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
-	PCFR |= PCFR_OPDE;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
-
-	/* allow wakeup from various GPIOs */
-	gpio_set_wake(CORGI_GPIO_KEY_INT, 1);
-	gpio_set_wake(CORGI_GPIO_WAKEUP, 1);
-	gpio_set_wake(CORGI_GPIO_AC_IN, 1);
-	gpio_set_wake(CORGI_GPIO_CHRG_FULL, 1);
-
-	if (!machine_is_corgi())
-		gpio_set_wake(CORGI_GPIO_MAIN_BAT_LOW, 1);
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	corgi_init_spi();
-
- 	pxa_set_udc_info(&udc_info);
-	gpiod_add_lookup_table(&corgi_mci_gpio_table);
-	gpiod_add_lookup_table(&corgi_audio_gpio_table);
-	pxa_set_mci_info(&corgi_mci_platform_data);
-	pxa_set_ficp_info(&corgi_ficp_platform_data);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices));
-
-	platform_scoop_config = &corgi_pcmcia_config;
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	regulator_has_full_constraints();
-}
-
-static void __init fixup_corgi(struct tag *tags, char **cmdline)
-{
-	sharpsl_save_param();
-	if (machine_is_corgi())
-		memblock_add(0xa0000000, SZ_32M);
-	else
-		memblock_add(0xa0000000, SZ_64M);
-}
-
-#ifdef CONFIG_MACH_CORGI
-MACHINE_START(CORGI, "SHARP Corgi")
-	.fixup		= fixup_corgi,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= corgi_init,
-	.init_time	= pxa_timer_init,
-	.restart	= corgi_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_SHEPHERD
-MACHINE_START(SHEPHERD, "SHARP Shepherd")
-	.fixup		= fixup_corgi,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= corgi_init,
-	.init_time	= pxa_timer_init,
-	.restart	= corgi_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_HUSKY
-MACHINE_START(HUSKY, "SHARP Husky")
-	.fixup		= fixup_corgi,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= corgi_init,
-	.init_time	= pxa_timer_init,
-	.restart	= corgi_restart,
-MACHINE_END
-#endif
-
diff --git a/arch/arm/mach-pxa/corgi.h b/arch/arm/mach-pxa/corgi.h
deleted file mode 100644
index b565ca7b8cda..000000000000
--- a/arch/arm/mach-pxa/corgi.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Hardware specific definitions for SL-C7xx series of PDAs
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches
- */
-#ifndef __ASM_ARCH_CORGI_H
-#define __ASM_ARCH_CORGI_H  1
-
-#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
-
-/*
- * Corgi (Non Standard) GPIO Definitions
- */
-#define CORGI_GPIO_KEY_INT			(0)	/* Keyboard Interrupt */
-#define CORGI_GPIO_AC_IN			(1) /* Charger Detection */
-#define CORGI_GPIO_WAKEUP			(3) /* System wakeup notification? */
-#define CORGI_GPIO_AK_INT			(4)	/* Headphone Jack Control Interrupt */
-#define CORGI_GPIO_TP_INT			(5)	/* Touch Panel Interrupt */
-#define CORGI_GPIO_nSD_WP			(7) /* SD Write Protect? */
-#define CORGI_GPIO_nSD_DETECT		(9) /* MMC/SD Card Detect */
-#define CORGI_GPIO_nSD_INT			(10) /* SD Interrupt for SDIO? */
-#define CORGI_GPIO_MAIN_BAT_LOW		(11) /* Main Battery Low Notification */
-#define CORGI_GPIO_BAT_COVER		(11) /* Battery Cover Detect */
-#define CORGI_GPIO_LED_ORANGE		(13) /* Orange LED Control */
-#define CORGI_GPIO_CF_CD			(14) /* Compact Flash Card Detect */
-#define CORGI_GPIO_CHRG_FULL		(16) /* Charging Complete Notification */
-#define CORGI_GPIO_CF_IRQ			(17) /* Compact Flash Interrupt */
-#define CORGI_GPIO_LCDCON_CS		(19) /* LCD Control Chip Select */
-#define CORGI_GPIO_MAX1111_CS		(20) /* MAX1111 Chip Select */
-#define CORGI_GPIO_ADC_TEMP_ON		(21) /* Select battery voltage or temperature */
-#define CORGI_GPIO_IR_ON			(22) /* Enable IR Transceiver */
-#define CORGI_GPIO_ADS7846_CS		(24) /* ADS7846 Chip Select */
-#define CORGI_GPIO_SD_PWR			(33) /* MMC/SD Power */
-#define CORGI_GPIO_CHRG_ON			(38) /* Enable battery Charging */
-#define CORGI_GPIO_DISCHARGE_ON		(42) /* Enable battery Discharge */
-#define CORGI_GPIO_CHRG_UKN			(43) /* Unknown Charging (Bypass Control?) */
-#define CORGI_GPIO_HSYNC			(44) /* LCD HSync Pulse */
-#define CORGI_GPIO_USB_PULLUP		(45) /* USB show presence to host */
-
-
-/*
- * Corgi Keyboard Definitions
- */
-#define CORGI_KEY_STROBE_NUM		(12)
-#define CORGI_KEY_SENSE_NUM			(8)
-#define CORGI_GPIO_ALL_STROBE_BIT	(0x00003ffc)
-#define CORGI_GPIO_HIGH_SENSE_BIT	(0xfc000000)
-#define CORGI_GPIO_HIGH_SENSE_RSHIFT	(26)
-#define CORGI_GPIO_LOW_SENSE_BIT	(0x00000003)
-#define CORGI_GPIO_LOW_SENSE_LSHIFT	(6)
-#define CORGI_GPIO_STROBE_BIT(a)	GPIO_bit(66+(a))
-#define CORGI_GPIO_SENSE_BIT(a)		GPIO_bit(58+(a))
-#define CORGI_GAFR_ALL_STROBE_BIT	(0x0ffffff0)
-#define CORGI_GAFR_HIGH_SENSE_BIT	(0xfff00000)
-#define CORGI_GAFR_LOW_SENSE_BIT	(0x0000000f)
-#define CORGI_GPIO_KEY_SENSE(a)		(58+(a))
-#define CORGI_GPIO_KEY_STROBE(a)	(66+(a))
-
-
-/*
- * Corgi Interrupts
- */
-#define CORGI_IRQ_GPIO_KEY_INT		PXA_GPIO_TO_IRQ(0)
-#define CORGI_IRQ_GPIO_AC_IN		PXA_GPIO_TO_IRQ(1)
-#define CORGI_IRQ_GPIO_WAKEUP		PXA_GPIO_TO_IRQ(3)
-#define CORGI_IRQ_GPIO_AK_INT		PXA_GPIO_TO_IRQ(4)
-#define CORGI_IRQ_GPIO_TP_INT		PXA_GPIO_TO_IRQ(5)
-#define CORGI_IRQ_GPIO_nSD_DETECT	PXA_GPIO_TO_IRQ(9)
-#define CORGI_IRQ_GPIO_nSD_INT		PXA_GPIO_TO_IRQ(10)
-#define CORGI_IRQ_GPIO_MAIN_BAT_LOW	PXA_GPIO_TO_IRQ(11)
-#define CORGI_IRQ_GPIO_CF_CD		PXA_GPIO_TO_IRQ(14)
-#define CORGI_IRQ_GPIO_CHRG_FULL	PXA_GPIO_TO_IRQ(16)	/* Battery fully charged */
-#define CORGI_IRQ_GPIO_CF_IRQ		PXA_GPIO_TO_IRQ(17)
-#define CORGI_IRQ_GPIO_KEY_SENSE(a)	PXA_GPIO_TO_IRQ(58+(a))	/* Keyboard Sense lines */
-
-
-/*
- * Corgi SCOOP GPIOs and Config
- */
-#define CORGI_SCP_LED_GREEN		SCOOP_GPCR_PA11
-#define CORGI_SCP_SWA			SCOOP_GPCR_PA12  /* Hinge Switch A */
-#define CORGI_SCP_SWB			SCOOP_GPCR_PA13  /* Hinge Switch B */
-#define CORGI_SCP_MUTE_L		SCOOP_GPCR_PA14
-#define CORGI_SCP_MUTE_R		SCOOP_GPCR_PA15
-#define CORGI_SCP_AKIN_PULLUP	SCOOP_GPCR_PA16
-#define CORGI_SCP_APM_ON		SCOOP_GPCR_PA17
-#define CORGI_SCP_BACKLIGHT_CONT	SCOOP_GPCR_PA18
-#define CORGI_SCP_MIC_BIAS		SCOOP_GPCR_PA19
-
-#define CORGI_SCOOP_IO_DIR	( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \
-			CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \
-			CORGI_SCP_MIC_BIAS )
-#define CORGI_SCOOP_IO_OUT	( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
-
-#define CORGI_SCOOP_GPIO_BASE		(PXA_NR_BUILTIN_GPIO)
-#define CORGI_GPIO_LED_GREEN		(CORGI_SCOOP_GPIO_BASE + 0)
-#define CORGI_GPIO_SWA			(CORGI_SCOOP_GPIO_BASE + 1)  /* Hinge Switch A */
-#define CORGI_GPIO_SWB			(CORGI_SCOOP_GPIO_BASE + 2)  /* Hinge Switch B */
-#define CORGI_GPIO_MUTE_L		(CORGI_SCOOP_GPIO_BASE + 3)
-#define CORGI_GPIO_MUTE_R		(CORGI_SCOOP_GPIO_BASE + 4)
-#define CORGI_GPIO_AKIN_PULLUP		(CORGI_SCOOP_GPIO_BASE + 5)
-#define CORGI_GPIO_APM_ON		(CORGI_SCOOP_GPIO_BASE + 6)
-#define CORGI_GPIO_BACKLIGHT_CONT	(CORGI_SCOOP_GPIO_BASE + 7)
-#define CORGI_GPIO_MIC_BIAS		(CORGI_SCOOP_GPIO_BASE + 8)
-
-#endif /* __ASM_ARCH_CORGI_H  */
-
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
deleted file mode 100644
index 555a5c1afd96..000000000000
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ /dev/null
@@ -1,221 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Battery and Power Management code for the Sharp SL-C7xx
- *
- * Copyright (c) 2005 Richard Purdie
- */
-
-#include <linux/module.h>
-#include <linux/stat.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/apm-emulation.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "corgi.h"
-#include "pxa2xx-regs.h"
-#include "sharpsl_pm.h"
-
-#include "generic.h"
-
-#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
-#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
-#define SHARPSL_CHARGE_ON_ACIN_HIGH    0x9b  /* 6V */
-#define SHARPSL_CHARGE_ON_ACIN_LOW     0x34  /* 2V */
-#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
-#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
-
-static struct gpio charger_gpios[] = {
-	{ CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
-	{ CORGI_GPIO_CHRG_ON,	  GPIOF_OUT_INIT_LOW, "Charger On" },
-	{ CORGI_GPIO_CHRG_UKN,	  GPIOF_OUT_INIT_LOW, "Charger Unknown" },
-	{ CORGI_GPIO_AC_IN,	  GPIOF_IN, "Charger Detection" },
-	{ CORGI_GPIO_KEY_INT,	  GPIOF_IN, "Key Interrupt" },
-	{ CORGI_GPIO_WAKEUP,	  GPIOF_IN, "System wakeup notification" },
-};
-
-static void corgi_charger_init(void)
-{
-	gpio_request_array(ARRAY_AND_SIZE(charger_gpios));
-}
-
-static void corgi_measure_temp(int on)
-{
-	gpio_set_value(CORGI_GPIO_ADC_TEMP_ON, on);
-}
-
-static void corgi_charge(int on)
-{
-	if (on) {
-		if (machine_is_corgi() && (sharpsl_pm.flags & SHARPSL_SUSPENDED)) {
-			gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
-			gpio_set_value(CORGI_GPIO_CHRG_UKN, 1);
-		} else {
-			gpio_set_value(CORGI_GPIO_CHRG_ON, 1);
-			gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
-		}
-	} else {
-		gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
-		gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
-	}
-}
-
-static void corgi_discharge(int on)
-{
-	gpio_set_value(CORGI_GPIO_DISCHARGE_ON, on);
-}
-
-static void corgi_presuspend(void)
-{
-}
-
-static void corgi_postsuspend(void)
-{
-}
-
-/*
- * Check what brought us out of the suspend.
- * Return: 0 to sleep, otherwise wake
- */
-static int corgi_should_wakeup(unsigned int resume_on_alarm)
-{
-	int is_resume = 0;
-
-	dev_dbg(sharpsl_pm.dev, "PEDR = %x, GPIO_AC_IN = %d, "
-		"GPIO_CHRG_FULL = %d, GPIO_KEY_INT = %d, GPIO_WAKEUP = %d\n",
-		PEDR, gpio_get_value(CORGI_GPIO_AC_IN),
-		gpio_get_value(CORGI_GPIO_CHRG_FULL),
-		gpio_get_value(CORGI_GPIO_KEY_INT),
-		gpio_get_value(CORGI_GPIO_WAKEUP));
-
-	if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) {
-		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
-			/* charge on */
-			dev_dbg(sharpsl_pm.dev, "ac insert\n");
-			sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
-		} else {
-			/* charge off */
-			dev_dbg(sharpsl_pm.dev, "ac remove\n");
-			sharpsl_pm_led(SHARPSL_LED_OFF);
-			sharpsl_pm.machinfo->charge(0);
-			sharpsl_pm.charge_mode = CHRG_OFF;
-		}
-	}
-
-	if ((PEDR & GPIO_bit(CORGI_GPIO_CHRG_FULL)))
-		dev_dbg(sharpsl_pm.dev, "Charge full interrupt\n");
-
-	if (PEDR & GPIO_bit(CORGI_GPIO_KEY_INT))
-		is_resume |= GPIO_bit(CORGI_GPIO_KEY_INT);
-
-	if (PEDR & GPIO_bit(CORGI_GPIO_WAKEUP))
-		is_resume |= GPIO_bit(CORGI_GPIO_WAKEUP);
-
-	if (resume_on_alarm && (PEDR & PWER_RTC))
-		is_resume |= PWER_RTC;
-
-	dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
-	return is_resume;
-}
-
-static bool corgi_charger_wakeup(void)
-{
-	return !gpio_get_value(CORGI_GPIO_AC_IN) ||
-		!gpio_get_value(CORGI_GPIO_KEY_INT) ||
-		!gpio_get_value(CORGI_GPIO_WAKEUP);
-}
-
-unsigned long corgipm_read_devdata(int type)
-{
-	switch(type) {
-	case SHARPSL_STATUS_ACIN:
-		return !gpio_get_value(CORGI_GPIO_AC_IN);
-	case SHARPSL_STATUS_LOCK:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
-	case SHARPSL_STATUS_CHRGFULL:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
-	case SHARPSL_STATUS_FATAL:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
-	case SHARPSL_ACIN_VOLT:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
-	case SHARPSL_BATT_TEMP:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP);
-	case SHARPSL_BATT_VOLT:
-	default:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT);
-	}
-}
-
-static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
-	.init            = corgi_charger_init,
-	.exit            = NULL,
-	.gpio_batlock    = CORGI_GPIO_BAT_COVER,
-	.gpio_acin       = CORGI_GPIO_AC_IN,
-	.gpio_batfull    = CORGI_GPIO_CHRG_FULL,
-	.discharge       = corgi_discharge,
-	.charge          = corgi_charge,
-	.measure_temp    = corgi_measure_temp,
-	.presuspend      = corgi_presuspend,
-	.postsuspend     = corgi_postsuspend,
-	.read_devdata    = corgipm_read_devdata,
-	.charger_wakeup  = corgi_charger_wakeup,
-	.should_wakeup   = corgi_should_wakeup,
-#if defined(CONFIG_LCD_CORGI)
-	.backlight_limit = corgi_lcd_limit_intensity,
-#endif
-	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
-	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
-	.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
-	.charge_acin_low  = SHARPSL_CHARGE_ON_ACIN_LOW,
-	.fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,
-	.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
-	.bat_levels       = 40,
-	.bat_levels_noac  = sharpsl_battery_levels_noac,
-	.bat_levels_acin  = sharpsl_battery_levels_acin,
-	.status_high_acin = 188,
-	.status_low_acin  = 178,
-	.status_high_noac = 185,
-	.status_low_noac  = 175,
-};
-
-static struct platform_device *corgipm_device;
-
-static int corgipm_init(void)
-{
-	int ret;
-
-	if (!machine_is_corgi() && !machine_is_shepherd()
-			&& !machine_is_husky())
-		return -ENODEV;
-
-	corgipm_device = platform_device_alloc("sharpsl-pm", -1);
-	if (!corgipm_device)
-		return -ENOMEM;
-
-	if (!machine_is_corgi())
-	    corgi_pm_machinfo.batfull_irq = 1;
-
-	corgipm_device->dev.platform_data = &corgi_pm_machinfo;
-	ret = platform_device_add(corgipm_device);
-
-	if (ret)
-		platform_device_put(corgipm_device);
-
-	return ret;
-}
-
-static void corgipm_exit(void)
-{
-	platform_device_unregister(corgipm_device);
-}
-
-module_init(corgipm_init);
-module_exit(corgipm_exit);
diff --git a/arch/arm/mach-pxa/csb701.c b/arch/arm/mach-pxa/csb701.c
deleted file mode 100644
index 527c9fdf9795..000000000000
--- a/arch/arm/mach-pxa/csb701.c
+++ /dev/null
@@ -1,67 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-
-static struct gpio_keys_button csb701_buttons[] = {
-	{
-		.code	= 0x7,
-		.gpio	= 1,
-		.active_low = 1,
-		.desc	= "SW2",
-		.type	= EV_SW,
-		.wakeup = 1,
-	},
-};
-
-static struct gpio_keys_platform_data csb701_gpio_keys_data = {
-	.buttons = csb701_buttons,
-	.nbuttons = ARRAY_SIZE(csb701_buttons),
-};
-
-static struct gpio_led csb701_leds[] = {
-	{
-		.name	= "csb701:yellow:heartbeat",
-		.default_trigger = "heartbeat",
-		.gpio	= 11,
-		.active_low = 1,
-	},
-};
-
-static struct platform_device csb701_gpio_keys = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev.platform_data = &csb701_gpio_keys_data,
-};
-
-static struct gpio_led_platform_data csb701_leds_gpio_data = {
-	.leds		= csb701_leds,
-	.num_leds	= ARRAY_SIZE(csb701_leds),
-};
-
-static struct platform_device csb701_leds_gpio = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev.platform_data = &csb701_leds_gpio_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&csb701_gpio_keys,
-	&csb701_leds_gpio,
-};
-
-static int __init csb701_init(void)
-{
-	if (!machine_is_csb726())
-		return -ENODEV;
-
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-module_init(csb701_init);
-
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
deleted file mode 100644
index 410b1af87d55..000000000000
--- a/arch/arm/mach-pxa/csb726.c
+++ /dev/null
@@ -1,291 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Support for Cogent CSB726
- *
- *  Copyright (c) 2008 Dmitry Eremin-Solenikov
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/sm501.h>
-#include <linux/smsc911x.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "csb726.h"
-#include "pxa27x.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/asoc-pxa.h>
-#include "smemc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/*
- * n/a: 2, 5, 6, 7, 8, 23, 24, 25, 26, 27, 87, 88, 89,
- * nu: 58 -- 77, 90, 91, 93, 102, 105-108, 114-116,
- * XXX: 21,
- * XXX: 79 CS_3 for LAN9215 or PSKTSEL on R2, R3
- * XXX: 33 CS_5 for LAN9215 on R1
- */
-
-static unsigned long csb726_pin_config[] = {
-	GPIO78_nCS_2, /* EXP_CS */
-	GPIO79_nCS_3, /* SMSC9215 */
-	GPIO80_nCS_4, /* SM501 */
-
-	GPIO52_GPIO, /* #SMSC9251 int */
-	GPIO53_GPIO, /* SM501 int */
-
-	GPIO1_GPIO, /* GPIO0 */
-	GPIO11_GPIO, /* GPIO1 */
-	GPIO9_GPIO, /* GPIO2 */
-	GPIO10_GPIO, /* GPIO3 */
-	GPIO16_PWM0_OUT, /* or GPIO4 */
-	GPIO17_PWM1_OUT, /* or GPIO5 */
-	GPIO94_GPIO, /* GPIO6 */
-	GPIO95_GPIO, /* GPIO7 */
-	GPIO96_GPIO, /* GPIO8 */
-	GPIO97_GPIO, /* GPIO9 */
-	GPIO15_GPIO, /* EXP_IRQ */
-	GPIO18_RDY, /* EXP_WAIT */
-
-	GPIO0_GPIO, /* PWR_INT */
-	GPIO104_GPIO, /* PWR_OFF */
-
-	GPIO12_GPIO, /* touch irq */
-
-	GPIO13_SSP2_TXD,
-	GPIO14_SSP2_SFRM,
-	MFP_CFG_OUT(GPIO19, AF1, DRIVE_LOW),/* SSP2_SYSCLK */
-	GPIO22_SSP2_SCLK,
-
-	GPIO81_SSP3_TXD,
-	GPIO82_SSP3_RXD,
-	GPIO83_SSP3_SFRM,
-	GPIO84_SSP3_SCLK,
-
-	GPIO20_GPIO, /* SDIO int */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO100_GPIO, /* SD CD */
-	GPIO101_GPIO, /* SD WP */
-
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO113_AC97_nRESET,
-
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16, /* maybe unused */
-	GPIO85_nPCE_1,
-	GPIO98_GPIO, /* CF IRQ */
-	GPIO99_GPIO, /* CF CD */
-	GPIO103_GPIO, /* Reset */
-
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-};
-
-static struct pxamci_platform_data csb726_mci = {
-	.detect_delay_ms	= 500,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	/* FIXME setpower */
-};
-
-static struct gpiod_lookup_table csb726_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on GPIO 100 */
-		GPIO_LOOKUP("gpio-pxa", CSB726_GPIO_MMC_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		/* Write protect on GPIO 101 */
-		GPIO_LOOKUP("gpio-pxa", CSB726_GPIO_MMC_RO,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct pxaohci_platform_data csb726_ohci_platform_data = {
-	.port_mode	= PMM_NPS_MODE,
-	.flags		= ENABLE_PORT1 | NO_OC_PROTECTION,
-};
-
-static struct mtd_partition csb726_flash_partitions[] = {
-	{
-		.name		= "Bootloader",
-		.offset		= 0,
-		.size		= CSB726_FLASH_uMON,
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "root",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data csb726_flash_data = {
-	.width		= 2,
-	.parts		= csb726_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(csb726_flash_partitions),
-};
-
-static struct resource csb726_flash_resources[] = {
-	{
-		.start          = PXA_CS0_PHYS,
-		.end            = PXA_CS0_PHYS + CSB726_FLASH_SIZE - 1 ,
-		.flags          = IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device csb726_flash = {
-	.name           = "physmap-flash",
-	.dev            = {
-		.platform_data  = &csb726_flash_data,
-	},
-	.resource       = csb726_flash_resources,
-	.num_resources  = ARRAY_SIZE(csb726_flash_resources),
-};
-
-static struct resource csb726_sm501_resources[] = {
-	{
-		.start          = PXA_CS4_PHYS,
-		.end            = PXA_CS4_PHYS + SZ_8M - 1,
-		.flags          = IORESOURCE_MEM,
-		.name		= "sm501-localmem",
-	},
-	{
-		.start          = PXA_CS4_PHYS + SZ_64M - SZ_2M,
-		.end            = PXA_CS4_PHYS + SZ_64M - 1,
-		.flags          = IORESOURCE_MEM,
-		.name		= "sm501-regs",
-	},
-	{
-		.start		= CSB726_IRQ_SM501,
-		.end		= CSB726_IRQ_SM501,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct sm501_initdata csb726_sm501_initdata = {
-/*	.devices	= SM501_USE_USB_HOST, */
-	.devices	= SM501_USE_USB_HOST | SM501_USE_UART0 | SM501_USE_UART1,
-};
-
-static struct sm501_platdata csb726_sm501_platdata = {
-	.init		= &csb726_sm501_initdata,
-};
-
-static struct platform_device csb726_sm501 = {
-	.name		= "sm501",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(csb726_sm501_resources),
-	.resource	= csb726_sm501_resources,
-	.dev		= {
-		.platform_data = &csb726_sm501_platdata,
-	},
-};
-
-static struct resource csb726_lan_resources[] = {
-	{
-		.start	= PXA_CS3_PHYS,
-		.end	= PXA_CS3_PHYS + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= CSB726_IRQ_LAN,
-		.end	= CSB726_IRQ_LAN,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-struct smsc911x_platform_config csb726_lan_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_32BIT,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-
-static struct platform_device csb726_lan = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(csb726_lan_resources),
-	.resource	= csb726_lan_resources,
-	.dev		= {
-		.platform_data	= &csb726_lan_config,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&csb726_flash,
-	&csb726_sm501,
-	&csb726_lan,
-};
-
-static void __init csb726_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
-/*	__raw_writel(0x7ffc3ffc, MSC1); *//* LAN9215/EXP_CS */
-/*	__raw_writel(0x06697ff4, MSC2); *//* none/SM501 */
-	__raw_writel((__raw_readl(MSC2) & ~0xffff) | 0x7ff4, MSC2); /* SM501 */
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_i2c_info(NULL);
-	pxa27x_set_i2c_power_info(NULL);
-	gpiod_add_lookup_table(&csb726_mci_gpio_table);
-	pxa_set_mci_info(&csb726_mci);
-	pxa_set_ohci_info(&csb726_ohci_platform_data);
-	pxa_set_ac97_info(NULL);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(CSB726, "Cogent CSB726")
-	.atag_offset	= 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_machine   = csb726_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/csb726.h b/arch/arm/mach-pxa/csb726.h
deleted file mode 100644
index 628928743bd5..000000000000
--- a/arch/arm/mach-pxa/csb726.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Support for Cogent CSB726
- *
- *  Copyright (c) 2008 Dmitry Baryshkov
- */
-#ifndef CSB726_H
-#define CSB726_H
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-#define CSB726_GPIO_IRQ_LAN	52
-#define CSB726_GPIO_IRQ_SM501	53
-#define CSB726_GPIO_MMC_DETECT	100
-#define CSB726_GPIO_MMC_RO	101
-
-#define CSB726_FLASH_SIZE	(64 * 1024 * 1024)
-#define CSB726_FLASH_uMON	(8 * 1024 * 1024)
-
-#define CSB726_IRQ_LAN		PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_LAN)
-#define CSB726_IRQ_SM501	PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_SM501)
-
-#endif
-
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index a7b92dd1ca9e..7695cfce01a1 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -7,23 +7,18 @@
 #include <linux/clk-provider.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
-#include <linux/spi/pxa2xx_spi.h>
+#include <linux/gpio-pxa.h>
 #include <linux/platform_data/i2c-pxa.h>
 #include <linux/soc/pxa/cpu.h>
 
 #include "udc.h"
-#include <linux/platform_data/usb-pxa3xx-ulpi.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
 #include "irqs.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/media/camera-pxa.h>
-#include <linux/platform_data/asoc-pxa.h>
 #include <linux/platform_data/mmp_dma.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
 
+#include "mfp-pxa2xx.h"
 #include "regs-ost.h"
 #include "reset.h"
 #include "devices.h"
@@ -53,7 +48,7 @@ struct platform_device pxa_device_pmu = {
 	.num_resources	= 1,
 };
 
-static struct resource pxamci_resources[] = {
+static const struct resource pxamci_resources[] = {
 	[0] = {
 		.start	= 0x41100000,
 		.end	= 0x41100fff,
@@ -66,34 +61,32 @@ static struct resource pxamci_resources[] = {
 	},
 };
 
-static u64 pxamci_dmamask = 0xffffffffUL;
-
-struct platform_device pxa_device_mci = {
-	.name		= "pxa2xx-mci",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &pxamci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxamci_resources),
-	.resource	= pxamci_resources,
-};
-
-void __init pxa_set_mci_info(struct pxamci_platform_data *info)
+void __init pxa_set_mci_info(const struct pxamci_platform_data *info,
+			     const struct property_entry *props)
 {
-	pxa_register_device(&pxa_device_mci, info);
+	const struct platform_device_info mci_info = {
+		.name		= "pxa2xx-mci",
+		.id		= 0,
+		.res		= pxamci_resources,
+		.num_res	= ARRAY_SIZE(pxamci_resources),
+		.data		= info,
+		.size_data	= sizeof(*info),
+		.dma_mask	= 0xffffffffUL,
+		.properties	= props,
+	};
+	struct platform_device *mci_dev;
+	int err;
+
+	mci_dev = platform_device_register_full(&mci_info);
+	err = PTR_ERR_OR_ZERO(mci_dev);
+	if (err)
+		pr_err("Unable to create mci device: %d\n", err);
 }
 
-
 static struct pxa2xx_udc_mach_info pxa_udc_info = {
 	.gpio_pullup = -1,
 };
 
-void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
-{
-	memcpy(&pxa_udc_info, info, sizeof *info);
-}
-
 static struct resource pxa2xx_udc_resources[] = {
 	[0] = {
 		.start	= 0x40600000,
@@ -131,33 +124,6 @@ struct platform_device pxa27x_device_udc = {
 	}
 };
 
-#ifdef CONFIG_PXA3xx
-static struct resource pxa3xx_u2d_resources[] = {
-	[0] = {
-		.start	= 0x54100000,
-		.end	= 0x54100fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_USB2,
-		.end	= IRQ_USB2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_u2d = {
-	.name		= "pxa3xx-u2d",
-	.id		= -1,
-	.resource	= pxa3xx_u2d_resources,
-	.num_resources	= ARRAY_SIZE(pxa3xx_u2d_resources),
-};
-
-void __init pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_u2d, info);
-}
-#endif /* CONFIG_PXA3xx */
-
 static struct resource pxafb_resources[] = {
 	[0] = {
 		.start	= 0x44000000,
@@ -378,47 +344,6 @@ struct platform_device pxa_device_asoc_platform = {
 	.id		= -1,
 };
 
-static u64 pxaficp_dmamask = ~(u32)0;
-
-static struct resource pxa_ir_resources[] = {
-	[0] = {
-		.start  = IRQ_STUART,
-		.end    = IRQ_STUART,
-		.flags  = IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start  = IRQ_ICP,
-		.end    = IRQ_ICP,
-		.flags  = IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start  = 0x40800000,
-		.end	= 0x4080001b,
-		.flags  = IORESOURCE_MEM,
-	},
-	[4] = {
-		.start  = 0x40700000,
-		.end	= 0x40700023,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device pxa_device_ficp = {
-	.name		= "pxa2xx-ir",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa_ir_resources),
-	.resource	= pxa_ir_resources,
-	.dev		= {
-		.dma_mask = &pxaficp_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
-{
-	pxa_register_device(&pxa_device_ficp, info);
-}
-
 static struct resource pxa_rtc_resources[] = {
 	[0] = {
 		.start  = 0x40900000,
@@ -453,49 +378,6 @@ struct platform_device sa1100_device_rtc = {
 	.resource       = pxa_rtc_resources,
 };
 
-static struct resource pxa_ac97_resources[] = {
-	[0] = {
-		.start  = 0x40500000,
-		.end	= 0x40500000 + 0xfff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_AC97,
-		.end    = IRQ_AC97,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa_ac97_dmamask = 0xffffffffUL;
-
-struct platform_device pxa_device_ac97 = {
-	.name           = "pxa2xx-ac97",
-	.id             = -1,
-	.dev            = {
-		.dma_mask = &pxa_ac97_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources  = ARRAY_SIZE(pxa_ac97_resources),
-	.resource       = pxa_ac97_resources,
-};
-
-void __init pxa_set_ac97_info(pxa2xx_audio_ops_t *ops)
-{
-	int ret;
-
-	ret = clk_add_alias("ac97_clk", "pxa2xx-ac97:0", "AC97CLK",
-			   &pxa_device_ac97.dev);
-	if (ret)
-		pr_err("PXA AC97 clock1 alias error: %d\n", ret);
-
-	ret = clk_add_alias("ac97_clk", "pxa2xx-ac97:1", "AC97CLK",
-			    &pxa_device_ac97.dev);
-	if (ret)
-		pr_err("PXA AC97 clock2 alias error: %d\n", ret);
-
-	pxa_register_device(&pxa_device_ac97, ops);
-}
-
 #ifdef CONFIG_PXA25x
 
 static struct resource pxa25x_resource_pwm0[] = {
@@ -609,44 +491,6 @@ struct platform_device pxa25x_device_assp = {
 #endif /* CONFIG_PXA25x */
 
 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-static struct resource pxa27x_resource_camera[] = {
-	[0] = {
-		.start	= 0x50000000,
-		.end	= 0x50000fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CAMERA,
-		.end	= IRQ_CAMERA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
-
-static struct platform_device pxa27x_device_camera = {
-	.name		= "pxa27x-camera",
-	.id		= 0, /* This is used to put cameras on this interface */
-	.dev		= {
-		.dma_mask      		= &pxa27x_dma_mask_camera,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_camera),
-	.resource	= pxa27x_resource_camera,
-};
-
-void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
-{
-	struct clk *mclk;
-
-	/* Register a fixed-rate clock for camera sensors. */
-	mclk = clk_register_fixed_rate(NULL, "pxa_camera_clk", NULL, 0,
-					     info->mclk_10khz * 10000);
-	if (!IS_ERR(mclk))
-		clkdev_create(mclk, "mclk", NULL);
-	pxa_register_device(&pxa27x_device_camera, info);
-}
-
 static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
 
 static struct resource pxa27x_resource_ohci[] = {
@@ -680,31 +524,6 @@ void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
 #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
 
 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-static struct resource pxa27x_resource_keypad[] = {
-	[0] = {
-		.start	= 0x41500000,
-		.end	= 0x4150004c,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_KEYPAD,
-		.end	= IRQ_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa27x_device_keypad = {
-	.name		= "pxa27x-keypad",
-	.id		= -1,
-	.resource	= pxa27x_resource_keypad,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_keypad),
-};
-
-void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
-{
-	pxa_register_device(&pxa27x_device_keypad, info);
-}
-
 static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32);
 
 static struct resource pxa27x_resource_ssp1[] = {
@@ -814,210 +633,11 @@ struct platform_device pxa27x_device_pwm1 = {
 };
 #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
 
-#ifdef CONFIG_PXA3xx
-static struct resource pxa3xx_resources_mci2[] = {
-	[0] = {
-		.start	= 0x42000000,
-		.end	= 0x42000fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_MMC2,
-		.end	= IRQ_MMC2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_mci2 = {
-	.name		= "pxa2xx-mci",
-	.id		= 1,
-	.dev		= {
-		.dma_mask = &pxamci_dmamask,
-		.coherent_dma_mask =	0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_mci2),
-	.resource	= pxa3xx_resources_mci2,
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+const struct software_node pxa2xx_gpiochip_node = {
+	.name	= "gpio-pxa",
 };
 
-void __init pxa3xx_set_mci2_info(struct pxamci_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_mci2, info);
-}
-
-static struct resource pxa3xx_resources_mci3[] = {
-	[0] = {
-		.start	= 0x42500000,
-		.end	= 0x42500fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_MMC3,
-		.end	= IRQ_MMC3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_mci3 = {
-	.name		= "pxa2xx-mci",
-	.id		= 2,
-	.dev		= {
-		.dma_mask = &pxamci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_mci3),
-	.resource	= pxa3xx_resources_mci3,
-};
-
-void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_mci3, info);
-}
-
-static struct resource pxa3xx_resources_gcu[] = {
-	{
-		.start	= 0x54000000,
-		.end	= 0x54000fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_GCU,
-		.end	= IRQ_GCU,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device pxa3xx_device_gcu = {
-	.name		= "pxa3xx-gcu",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_gcu),
-	.resource	= pxa3xx_resources_gcu,
-	.dev		= {
-		.dma_mask = &pxa3xx_gcu_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-#endif /* CONFIG_PXA3xx */
-
-#if defined(CONFIG_PXA3xx)
-static struct resource pxa3xx_resources_i2c_power[] = {
-	{
-		.start  = 0x40f500c0,
-		.end    = 0x40f500d3,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PWRI2C,
-		.end	= IRQ_PWRI2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_i2c_power = {
-	.name		= "pxa3xx-pwri2c",
-	.id		= 1,
-	.resource	= pxa3xx_resources_i2c_power,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_i2c_power),
-};
-
-static struct resource pxa3xx_resources_nand[] = {
-	[0] = {
-		.start	= 0x43100000,
-		.end	= 0x43100053,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_NAND,
-		.end	= IRQ_NAND,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device pxa3xx_device_nand = {
-	.name		= "pxa3xx-nand",
-	.id		= -1,
-	.dev		= {
-		.dma_mask = &pxa3xx_nand_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_nand),
-	.resource	= pxa3xx_resources_nand,
-};
-
-void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_nand, info);
-}
-
-static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa3xx_resource_ssp4[] = {
-	[0] = {
-		.start	= 0x41a00000,
-		.end	= 0x41a0003f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SSP4,
-		.end	= IRQ_SSP4,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-/*
- * PXA3xx SSP is basically equivalent to PXA27x.
- * However, we need to register the device by the correct name in order to
- * make the driver set the correct internal type, hence we provide specific
- * platform_devices for each of them.
- */
-struct platform_device pxa3xx_device_ssp1 = {
-	.name		= "pxa3xx-ssp",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &pxa27x_ssp1_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa27x_resource_ssp1,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp1),
-};
-
-struct platform_device pxa3xx_device_ssp2 = {
-	.name		= "pxa3xx-ssp",
-	.id		= 1,
-	.dev		= {
-		.dma_mask = &pxa27x_ssp2_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa27x_resource_ssp2,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp2),
-};
-
-struct platform_device pxa3xx_device_ssp3 = {
-	.name		= "pxa3xx-ssp",
-	.id		= 2,
-	.dev		= {
-		.dma_mask = &pxa27x_ssp3_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa27x_resource_ssp3,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp3),
-};
-
-struct platform_device pxa3xx_device_ssp4 = {
-	.name		= "pxa3xx-ssp",
-	.id		= 3,
-	.dev		= {
-		.dma_mask = &pxa3xx_ssp4_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa3xx_resource_ssp4,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resource_ssp4),
-};
-#endif /* CONFIG_PXA3xx */
-
 struct resource pxa_resource_gpio[] = {
 	{
 		.start	= 0x40e00000,
@@ -1041,15 +661,19 @@ struct resource pxa_resource_gpio[] = {
 	},
 };
 
+static struct pxa_gpio_platform_data pxa2xx_gpio_info = {
+	.irq_base	= PXA_GPIO_TO_IRQ(0),
+	.gpio_set_wake	= gpio_set_wake,
+};
+
 struct platform_device pxa25x_device_gpio = {
-#ifdef CONFIG_CPU_PXA26x
-	.name		= "pxa26x-gpio",
-#else
 	.name		= "pxa25x-gpio",
-#endif
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
 	.resource	= pxa_resource_gpio,
+	.dev		= {
+		.platform_data	= &pxa2xx_gpio_info,
+	},
 };
 
 struct platform_device pxa27x_device_gpio = {
@@ -1057,38 +681,11 @@ struct platform_device pxa27x_device_gpio = {
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
 	.resource	= pxa_resource_gpio,
+	.dev		= {
+		.platform_data	= &pxa2xx_gpio_info,
+	},
 };
-
-struct platform_device pxa3xx_device_gpio = {
-	.name		= "pxa3xx-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
-	.resource	= pxa_resource_gpio,
-};
-
-struct platform_device pxa93x_device_gpio = {
-	.name		= "pxa93x-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
-	.resource	= pxa_resource_gpio,
-};
-
-/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
- * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
-void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_controller *info)
-{
-	struct platform_device *pd;
-
-	pd = platform_device_alloc("pxa2xx-spi", id);
-	if (pd == NULL) {
-		printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
-		       id);
-		return;
-	}
-
-	pd->dev.platform_data = info;
-	platform_device_add(pd);
-}
+#endif /* CONFIG_PXA25x || CONFIG_PXA27x */
 
 static struct resource pxa_dma_resource[] = {
 	[0] = {
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 498b07bc6a3e..72c556ff67db 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -4,12 +4,10 @@
 struct mmp_dma_platdata;
 
 extern struct platform_device pxa_device_pmu;
-extern struct platform_device pxa_device_mci;
 extern struct platform_device pxa3xx_device_mci2;
 extern struct platform_device pxa3xx_device_mci3;
 extern struct platform_device pxa25x_device_udc;
 extern struct platform_device pxa27x_device_udc;
-extern struct platform_device pxa3xx_device_u2d;
 extern struct platform_device pxa_device_fb;
 extern struct platform_device pxa_device_ffuart;
 extern struct platform_device pxa_device_btuart;
@@ -17,7 +15,6 @@ extern struct platform_device pxa_device_stuart;
 extern struct platform_device pxa_device_hwuart;
 extern struct platform_device pxa_device_i2c;
 extern struct platform_device pxa_device_i2s;
-extern struct platform_device pxa_device_ficp;
 extern struct platform_device sa1100_device_rtc;
 extern struct platform_device pxa_device_rtc;
 extern struct platform_device pxa_device_ac97;
@@ -55,8 +52,8 @@ extern struct platform_device pxa_device_asoc_ssp4;
 
 extern struct platform_device pxa25x_device_gpio;
 extern struct platform_device pxa27x_device_gpio;
-extern struct platform_device pxa3xx_device_gpio;
-extern struct platform_device pxa93x_device_gpio;
+
+extern const struct software_node pxa2xx_gpiochip_node;
 
 void __init pxa_register_device(struct platform_device *dev, void *data);
 void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata);
diff --git a/arch/arm/mach-pxa/e740-pcmcia.c b/arch/arm/mach-pxa/e740-pcmcia.c
deleted file mode 100644
index 11a2c5d42920..000000000000
--- a/arch/arm/mach-pxa/e740-pcmcia.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Toshiba e740 PCMCIA specific routines.
- *
- * (c) 2004 Ian Molton <spyro@f2s.com>
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include "eseries-gpio.h"
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <pcmcia/soc_common.h>
-
-static int e740_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	if (skt->nr == 0) {
-		skt->stat[SOC_STAT_CD].gpio = GPIO_E740_PCMCIA_CD0;
-		skt->stat[SOC_STAT_CD].name = "CF card detect";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO_E740_PCMCIA_RDY0;
-		skt->stat[SOC_STAT_RDY].name = "CF ready";
-	} else {
-		skt->stat[SOC_STAT_CD].gpio = GPIO_E740_PCMCIA_CD1;
-		skt->stat[SOC_STAT_CD].name = "Wifi switch";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO_E740_PCMCIA_RDY1;
-		skt->stat[SOC_STAT_RDY].name = "Wifi ready";
-	}
-
-	return 0;
-}
-
-static void e740_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int e740_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-					const socket_state_t *state)
-{
-	if (state->flags & SS_RESET) {
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_RST0, 1);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_RST1, 1);
-	} else {
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_RST0, 0);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_RST1, 0);
-	}
-
-	switch (state->Vcc) {
-	case 0:	/* Socket off */
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_PWR0, 0);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_PWR1, 1);
-		break;
-	case 50:
-	case 33: /* socket on */
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_PWR0, 1);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_PWR1, 0);
-		break;
-	default:
-		printk(KERN_ERR "e740_cs: Unsupported Vcc: %d\n", state->Vcc);
-	}
-
-	return 0;
-}
-
-static struct pcmcia_low_level e740_pcmcia_ops = {
-	.owner            = THIS_MODULE,
-	.hw_init          = e740_pcmcia_hw_init,
-	.socket_state     = e740_pcmcia_socket_state,
-	.configure_socket = e740_pcmcia_configure_socket,
-	.nr               = 2,
-};
-
-static struct platform_device *e740_pcmcia_device;
-
-static int __init e740_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_e740())
-		return -ENODEV;
-
-	e740_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!e740_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(e740_pcmcia_device, &e740_pcmcia_ops,
-					sizeof(e740_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(e740_pcmcia_device);
-
-	if (ret)
-		platform_device_put(e740_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit e740_pcmcia_exit(void)
-{
-	platform_device_unregister(e740_pcmcia_device);
-}
-
-module_init(e740_pcmcia_init);
-module_exit(e740_pcmcia_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_DESCRIPTION("e740 PCMCIA platform support");
diff --git a/arch/arm/mach-pxa/eseries-gpio.h b/arch/arm/mach-pxa/eseries-gpio.h
deleted file mode 100644
index 5c645600d401..000000000000
--- a/arch/arm/mach-pxa/eseries-gpio.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  eseries-gpio.h
- *
- *  Copyright (C) Ian Molton <spyro@f2s.com>
- */
-
-/* e-series power button */
-#define GPIO_ESERIES_POWERBTN     0
-
-/* UDC GPIO definitions */
-#define GPIO_E7XX_USB_DISC       13
-#define GPIO_E7XX_USB_PULLUP      3
-
-#define GPIO_E800_USB_DISC        4
-#define GPIO_E800_USB_PULLUP     84
-
-/* e740 PCMCIA GPIO definitions */
-/* Note: PWR1 seems to be inverted */
-#define GPIO_E740_PCMCIA_CD0      8
-#define GPIO_E740_PCMCIA_CD1     44
-#define GPIO_E740_PCMCIA_RDY0    11
-#define GPIO_E740_PCMCIA_RDY1     6
-#define GPIO_E740_PCMCIA_RST0    27
-#define GPIO_E740_PCMCIA_RST1    24
-#define GPIO_E740_PCMCIA_PWR0    20
-#define GPIO_E740_PCMCIA_PWR1    23
-
-/* e750 PCMCIA GPIO definitions */
-#define GPIO_E750_PCMCIA_CD0      8
-#define GPIO_E750_PCMCIA_RDY0    12
-#define GPIO_E750_PCMCIA_RST0    27
-#define GPIO_E750_PCMCIA_PWR0    20
-
-/* e800 PCMCIA GPIO definitions */
-#define GPIO_E800_PCMCIA_RST0    69
-#define GPIO_E800_PCMCIA_RST1    72
-#define GPIO_E800_PCMCIA_PWR0    20
-#define GPIO_E800_PCMCIA_PWR1    73
-
-/* e7xx IrDA power control */
-#define GPIO_E7XX_IR_OFF         38
-
-/* e740 audio control GPIOs */
-#define GPIO_E740_WM9705_nAVDD2  16
-#define GPIO_E740_MIC_ON         40
-#define GPIO_E740_AMP_ON         41
-
-/* e750 audio control GPIOs */
-#define GPIO_E750_HP_AMP_OFF      4
-#define GPIO_E750_SPK_AMP_OFF     7
-#define GPIO_E750_HP_DETECT      37
-
-/* e800 audio control GPIOs */
-#define GPIO_E800_HP_DETECT      81
-#define GPIO_E800_HP_AMP_OFF     82
-#define GPIO_E800_SPK_AMP_ON     83
-
-/* ASIC related GPIOs */
-#define GPIO_ESERIES_TMIO_IRQ        5
-#define GPIO_ESERIES_TMIO_PCLR      19
-#define GPIO_ESERIES_TMIO_SUSPEND   45
-#define GPIO_E800_ANGELX_IRQ      8
diff --git a/arch/arm/mach-pxa/eseries-irq.h b/arch/arm/mach-pxa/eseries-irq.h
deleted file mode 100644
index 572d573ce66b..000000000000
--- a/arch/arm/mach-pxa/eseries-irq.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  eseries-irq.h
- *
- *  Copyright (C) Ian Molton <spyro@f2s.com>
- */
-
-#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8)
-#define IRQ_ANGELX(n) (ANGELX_IRQ_BASE + (n))
-
-#define ANGELX_RDY0_IRQ IRQ_ANGELX(0)
-#define ANGELX_ST0_IRQ  IRQ_ANGELX(1)
-#define ANGELX_CD0_IRQ  IRQ_ANGELX(2)
-#define ANGELX_RDY1_IRQ IRQ_ANGELX(3)
-#define ANGELX_ST1_IRQ  IRQ_ANGELX(4)
-#define ANGELX_CD1_IRQ  IRQ_ANGELX(5)
-
-#define TMIO_IRQ_BASE (IRQ_BOARD_START+0)
-#define IRQ_TMIO(n) (TMIO_IRQ_BASE + (n))
-
-#define TMIO_SD_IRQ     IRQ_TMIO(1)
-#define TMIO_USB_IRQ    IRQ_TMIO(2)
-
-#define ESERIES_NR_IRQS	(IRQ_BOARD_START + 16)
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
deleted file mode 100644
index 2e4daeab6278..000000000000
--- a/arch/arm/mach-pxa/eseries.c
+++ /dev/null
@@ -1,1001 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- */
-
-#include <linux/clkdev.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk-provider.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/tc6387xb.h>
-#include <linux/mfd/tc6393xb.h>
-#include <linux/mfd/t7l66xb.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/memblock.h>
-#include <linux/gpio/machine.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "pxa25x.h"
-#include "eseries-gpio.h"
-#include "eseries-irq.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/video-pxafb.h>
-#include "udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
-
-#include "devices.h"
-#include "generic.h"
-
-/* Only e800 has 128MB RAM */
-void __init eseries_fixup(struct tag *tags, char **cmdline)
-{
-	if (machine_is_e800())
-		memblock_add(0xa0000000, SZ_128M);
-	else
-		memblock_add(0xa0000000, SZ_64M);
-}
-
-static struct gpiod_lookup_table e7xx_gpio_vbus_gpiod_table __maybe_unused = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_E7XX_USB_DISC,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_E7XX_USB_PULLUP,
-			    "pullup", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct platform_device e7xx_gpio_vbus __maybe_unused = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-struct pxaficp_platform_data e7xx_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_E7XX_IR_OFF,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-int eseries_tmio_enable(struct platform_device *dev)
-{
-	/* Reset - bring SUSPEND high before PCLR */
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
-	msleep(1);
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
-	msleep(1);
-	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1);
-	msleep(1);
-	return 0;
-}
-
-void eseries_tmio_disable(struct platform_device *dev)
-{
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
-}
-
-int eseries_tmio_suspend(struct platform_device *dev)
-{
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	return 0;
-}
-
-int eseries_tmio_resume(struct platform_device *dev)
-{
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
-	msleep(1);
-	return 0;
-}
-
-void eseries_get_tmio_gpios(void)
-{
-	gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL);
-	gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL);
-	gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0);
-}
-
-/* TMIO controller uses the same resources on all e-series machines. */
-struct resource eseries_tmio_resources[] = {
-	[0] = {
-		.start  = PXA_CS4_PHYS,
-		.end    = PXA_CS4_PHYS + 0x1fffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
-		.end    = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-/* Some e-series hardware cannot control the 32K clock */
-static void __init __maybe_unused eseries_register_clks(void)
-{
-	clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, 0, 32768);
-}
-
-#ifdef CONFIG_MACH_E330
-/* -------------------- e330 tc6387xb parameters -------------------- */
-
-static struct tc6387xb_platform_data e330_tc6387xb_info = {
-	.enable   = &eseries_tmio_enable,
-	.suspend  = &eseries_tmio_suspend,
-	.resume   = &eseries_tmio_resume,
-};
-
-static struct platform_device e330_tc6387xb_device = {
-	.name           = "tc6387xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e330_tc6387xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* --------------------------------------------------------------- */
-
-static struct platform_device *e330_devices[] __initdata = {
-	&e330_tc6387xb_device,
-	&e7xx_gpio_vbus,
-};
-
-static void __init e330_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(e330_devices));
-}
-
-MACHINE_START(E330, "Toshiba e330")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e330_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E350
-/* -------------------- e350 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e350_t7l66xb_info = {
-	.irq_base               = IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e350_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e350_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *e350_devices[] __initdata = {
-	&e350_t7l66xb_device,
-	&e7xx_gpio_vbus,
-};
-
-static void __init e350_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(e350_devices));
-}
-
-MACHINE_START(E350, "Toshiba e350")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e350_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E400
-/* ------------------------ E400 LCD definitions ------------------------ */
-
-static struct pxafb_mode_info e400_pxafb_mode_info = {
-	.pixclock       = 140703,
-	.xres           = 240,
-	.yres           = 320,
-	.bpp            = 16,
-	.hsync_len      = 4,
-	.left_margin    = 28,
-	.right_margin   = 8,
-	.vsync_len      = 3,
-	.upper_margin   = 5,
-	.lower_margin   = 6,
-	.sync           = 0,
-};
-
-static struct pxafb_mach_info e400_pxafb_mach_info = {
-	.modes          = &e400_pxafb_mode_info,
-	.num_modes      = 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-	.lccr3          = 0,
-	.pxafb_backlight_power  = NULL,
-};
-
-/* ------------------------ E400 MFP config ----------------------------- */
-
-static unsigned long e400_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ---------------------------------------------------------------------- */
-
-static struct mtd_partition partition_a = {
-	.name = "Internal NAND flash",
-	.offset =  0,
-	.size =  MTDPART_SIZ_FULL,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static struct tmio_nand_data e400_t7l66xb_nand_config = {
-	.num_partitions = 1,
-	.partition = &partition_a,
-	.badblock_pattern = &e400_t7l66xb_nand_bbt,
-};
-
-static struct t7l66xb_platform_data e400_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-
-	.nand_data              = &e400_t7l66xb_nand_config,
-};
-
-static struct platform_device e400_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e400_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *e400_devices[] __initdata = {
-	&e400_t7l66xb_device,
-	&e7xx_gpio_vbus,
-};
-
-static void __init e400_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	/* Fixme - e400 may have a switched clock */
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(e400_devices));
-}
-
-MACHINE_START(E400, "Toshiba e400")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e400_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E740
-/* ------------------------ e740 video support --------------------------- */
-
-static struct w100_gen_regs e740_lcd_regs = {
-	.lcd_format =            0x00008023,
-	.lcdd_cntl1 =            0x0f000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00ffff03,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e740_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 20,
-	.right_margin    = 28,
-	.upper_margin    = 9,
-	.lower_margin    = 8,
-	.crtc_ss         = 0x80140013,
-	.crtc_ls         = 0x81150110,
-	.crtc_gs         = 0x80050005,
-	.crtc_vpos_gs    = 0x000a0009,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa906000a,
-	.crtc_gclk       = 0x80050108,
-	.crtc_goe        = 0x80050108,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-	.crtc_ps1_active =       0x41060010,
-};
-
-static struct w100_gpio_regs e740_w100_gpio_info = {
-	.init_data1 = 0x21002103,
-	.gpio_dir1  = 0xffffdeff,
-	.gpio_oe1   = 0x03c00643,
-	.init_data2 = 0x003f003f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000000ff,
-};
-
-static struct w100fb_mach_info e740_fb_info = {
-	.modelist   = &e740_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e740_lcd_regs,
-	.gpio       = &e740_w100_gpio_info,
-	.xtal_freq = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e740_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e740_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e740_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e740_fb_resources),
-	.resource       = e740_fb_resources,
-};
-
-/* --------------------------- MFP Pin config -------------------------- */
-
-static unsigned long e740_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
-	GPIO40_GPIO,  /* Mic amp power */
-	GPIO41_GPIO,  /* Headphone amp power */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* -------------------- e740 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e740_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e740_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e740_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-static struct platform_device e740_audio_device = {
-	.name		= "e740-audio",
-	.id		= -1,
-};
-
-static struct gpiod_lookup_table e740_audio_gpio_table = {
-	.dev_id = "e740-audio",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E740_WM9705_nAVDD2, "Audio power",  GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E740_AMP_ON, "Output amp",  GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E740_MIC_ON, "Mic amp", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *e740_devices[] __initdata = {
-	&e740_fb_device,
-	&e740_t7l66xb_device,
-	&e7xx_gpio_vbus,
-	&e740_audio_device,
-};
-
-static void __init e740_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
-			"UDCCLK", &pxa25x_device_udc.dev),
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	gpiod_add_lookup_table(&e740_audio_gpio_table);
-	platform_add_devices(ARRAY_AND_SIZE(e740_devices));
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E740, "Toshiba e740")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e740_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E750
-/* ---------------------- E750 LCD definitions -------------------- */
-
-static struct w100_gen_regs e750_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x00000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00fff003,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e750_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 21,
-	.right_margin    = 22,
-	.upper_margin    = 5,
-	.lower_margin    = 4,
-	.crtc_ss         = 0x80150014,
-	.crtc_ls         = 0x8014000d,
-	.crtc_gs         = 0xc1000005,
-	.crtc_vpos_gs    = 0x00020147,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa1700030,
-	.crtc_gclk       = 0x80cc0015,
-	.crtc_goe        = 0x80cc0015,
-	.crtc_ps1_active = 0x61060017,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_gpio_regs e750_w100_gpio_info = {
-	.init_data1 = 0x01192f1b,
-	.gpio_dir1  = 0xd5ffdeff,
-	.gpio_oe1   = 0x000020bf,
-	.init_data2 = 0x010f010f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000001cf,
-};
-
-static struct w100fb_mach_info e750_fb_info = {
-	.modelist   = &e750_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e750_lcd_regs,
-	.gpio       = &e750_w100_gpio_info,
-	.xtal_freq  = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e750_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e750_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e750_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e750_fb_resources),
-	.resource       = e750_fb_resources,
-};
-
-/* -------------------- e750 MFP parameters -------------------- */
-
-static unsigned long e750_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO11_3_6MHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO4_GPIO,  /* Headphone amp power */
-	GPIO7_GPIO,  /* Speaker amp power */
-	GPIO37_GPIO, /* Headphone detect */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	/* GPIO11_GPIO,  IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ----------------- e750 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e750_tc6393xb_info = {
-	.irq_base       = IRQ_BOARD_START,
-	.scr_pll2cr     = 0x0cc1,
-	.scr_gper       = 0,
-	.suspend        = &eseries_tmio_suspend,
-	.resume         = &eseries_tmio_resume,
-	.enable         = &eseries_tmio_enable,
-	.disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e750_tc6393xb_device = {
-	.name           = "tc6393xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e750_tc6393xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-static struct gpiod_lookup_table e750_audio_gpio_table = {
-	.dev_id = "e750-audio",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E750_HP_AMP_OFF, "Output amp",  GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E750_SPK_AMP_OFF, "Mic amp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct platform_device e750_audio_device = {
-	.name		= "e750-audio",
-	.id		= -1,
-};
-
-/* ------------------------------------------------------------- */
-
-static struct platform_device *e750_devices[] __initdata = {
-	&e750_fb_device,
-	&e750_tc6393xb_device,
-	&e7xx_gpio_vbus,
-	&e750_audio_device,
-};
-
-static void __init e750_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
-			"GPIO11_CLK", NULL),
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	gpiod_add_lookup_table(&e750_audio_gpio_table);
-	platform_add_devices(ARRAY_AND_SIZE(e750_devices));
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E750, "Toshiba e750")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e750_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E800
-/* ------------------------ e800 LCD definitions ------------------------- */
-
-static unsigned long e800_pin_config[] __initdata = {
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* tc6393xb */
-	GPIO11_3_6MHz,
-};
-
-static struct w100_gen_regs e800_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x02a00000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x000ff2a3,
-	.genlcd_cntl2 =          0x000002a3,
-	.genlcd_cntl3 =          0x000102aa,
-};
-
-static struct w100_mode e800_lcd_mode[2] = {
-	[0] = {
-		.xres            = 480,
-		.yres            = 640,
-		.left_margin     = 52,
-		.right_margin    = 148,
-		.upper_margin    = 2,
-		.lower_margin    = 6,
-		.crtc_ss         = 0x80350034,
-		.crtc_ls         = 0x802b0026,
-		.crtc_gs         = 0x80160016,
-		.crtc_vpos_gs    = 0x00020003,
-		.crtc_rev        = 0x0040001d,
-		.crtc_dclk       = 0xe0000000,
-		.crtc_gclk       = 0x82a50049,
-		.crtc_goe        = 0x80ee001c,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 128,
-		.pixclk_divider         = 4,
-		.pixclk_divider_rotated = 6,
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	},
-	[1] = {
-		.xres            = 240,
-		.yres            = 320,
-		.left_margin     = 15,
-		.right_margin    = 88,
-		.upper_margin    = 0,
-		.lower_margin    = 7,
-		.crtc_ss         = 0xd010000f,
-		.crtc_ls         = 0x80070003,
-		.crtc_gs         = 0x80000000,
-		.crtc_vpos_gs    = 0x01460147,
-		.crtc_rev        = 0x00400003,
-		.crtc_dclk       = 0xa1700030,
-		.crtc_gclk       = 0x814b0008,
-		.crtc_goe        = 0x80cc0015,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 100,
-		.pixclk_divider         = 6, /* Wince uses 14 which gives a */
-		.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	}
-};
-
-
-static struct w100_gpio_regs e800_w100_gpio_info = {
-	.init_data1 = 0xc13fc019,
-	.gpio_dir1  = 0x3e40df7f,
-	.gpio_oe1   = 0x003c3000,
-	.init_data2 = 0x00000000,
-	.gpio_dir2  = 0x00000000,
-	.gpio_oe2   = 0x00000000,
-};
-
-static struct w100_mem_info e800_w100_mem_info = {
-	.ext_cntl        = 0x09640011,
-	.sdram_mode_reg  = 0x00600021,
-	.ext_timing_cntl = 0x10001545,
-	.io_cntl         = 0x7ddd7333,
-	.size            = 0x1fffff,
-};
-
-static void e800_tg_change(struct w100fb_par *par)
-{
-	unsigned long tmp;
-
-	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
-	if (par->mode->xres == 480)
-		tmp |= 0x100;
-	else
-		tmp &= ~0x100;
-	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
-}
-
-static struct w100_tg_info e800_tg_info = {
-	.change = e800_tg_change,
-};
-
-static struct w100fb_mach_info e800_fb_info = {
-	.modelist   = e800_lcd_mode,
-	.num_modes  = 2,
-	.regs       = &e800_lcd_regs,
-	.gpio       = &e800_w100_gpio_info,
-	.mem        = &e800_w100_mem_info,
-	.tg         = &e800_tg_info,
-	.xtal_freq  = 16000000,
-};
-
-static struct resource e800_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e800_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e800_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e800_fb_resources),
-	.resource       = e800_fb_resources,
-};
-
-/* --------------------------- UDC definitions --------------------------- */
-
-static struct gpiod_lookup_table e800_gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_E800_USB_DISC,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_E800_USB_PULLUP,
-			    "pullup", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct platform_device e800_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-
-/* ----------------- e800 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e800_tc6393xb_info = {
-	.irq_base       = IRQ_BOARD_START,
-	.scr_pll2cr     = 0x0cc1,
-	.scr_gper       = 0,
-	.suspend        = &eseries_tmio_suspend,
-	.resume         = &eseries_tmio_resume,
-	.enable         = &eseries_tmio_enable,
-	.disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e800_tc6393xb_device = {
-	.name           = "tc6393xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e800_tc6393xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-static struct gpiod_lookup_table e800_audio_gpio_table = {
-	.dev_id = "e800-audio",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E800_HP_AMP_OFF, "Output amp",  GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E800_SPK_AMP_ON, "Mic amp", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device e800_audio_device = {
-	.name		= "e800-audio",
-	.id		= -1,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *e800_devices[] __initdata = {
-	&e800_fb_device,
-	&e800_tc6393xb_device,
-	&e800_gpio_vbus,
-	&e800_audio_device,
-};
-
-static void __init e800_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
-			"GPIO11_CLK", NULL),
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e800_gpio_vbus_gpiod_table);
-	gpiod_add_lookup_table(&e800_audio_gpio_table);
-	platform_add_devices(ARRAY_AND_SIZE(e800_devices));
-	pxa_set_ac97_info(NULL);
-}
-
-MACHINE_START(E800, "Toshiba e800")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e800_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
deleted file mode 100644
index 69c2ec02a16c..000000000000
--- a/arch/arm/mach-pxa/ezx.c
+++ /dev/null
@@ -1,1254 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  ezx.c - Common code for the EZX platform.
- *
- *  Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
- *		  2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
- *		  2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds-lp3944.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa27x.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/media/camera-pxa.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define EZX_NR_IRQS			(IRQ_BOARD_START + 24)
-
-#define GPIO12_A780_FLIP_LID 		12
-#define GPIO15_A1200_FLIP_LID 		15
-#define GPIO15_A910_FLIP_LID 		15
-#define GPIO12_E680_LOCK_SWITCH 	12
-#define GPIO15_E6_LOCK_SWITCH 		15
-#define GPIO50_nCAM_EN			50
-#define GPIO19_GEN1_CAM_RST		19
-#define GPIO28_GEN2_CAM_RST		28
-
-static struct pwm_lookup ezx_pwm_lookup[] __maybe_unused = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78700,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data ezx_backlight_data = {
-	.max_brightness	= 1023,
-	.dft_brightness	= 1023,
-};
-
-static struct platform_device ezx_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent	= &pxa27x_device_pwm0.dev,
-		.platform_data = &ezx_backlight_data,
-	},
-};
-
-static struct pxafb_mode_info mode_ezx_old = {
-	.pixclock		= 150000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 10,
-	.left_margin		= 20,
-	.right_margin		= 10,
-	.vsync_len		= 2,
-	.upper_margin		= 3,
-	.lower_margin		= 2,
-	.sync			= 0,
-};
-
-static struct pxafb_mach_info ezx_fb_info_1 __maybe_unused = {
-	.modes		= &mode_ezx_old,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-};
-
-static struct pxafb_mode_info mode_72r89803y01 = {
-	.pixclock		= 192308,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 32,
-	.depth			= 18,
-	.hsync_len		= 10,
-	.left_margin		= 20,
-	.right_margin		= 10,
-	.vsync_len		= 2,
-	.upper_margin		= 3,
-	.lower_margin		= 2,
-	.sync			= 0,
-};
-
-static struct pxafb_mach_info ezx_fb_info_2 __maybe_unused = {
-	.modes		= &mode_72r89803y01,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_18BPP,
-};
-
-static struct platform_device *ezx_devices[] __initdata __maybe_unused = {
-	&ezx_backlight_device,
-};
-
-static unsigned long ezx_pin_config[] __initdata __maybe_unused = {
-	/* PWM backlight */
-	GPIO16_PWM0_OUT,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* PCAP SSP */
-	GPIO29_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO24_GPIO,				/* pcap chip select */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* pcap interrupt */
-	GPIO4_GPIO | MFP_LPM_DRIVE_HIGH,	/* WDI_AP */
-	GPIO55_GPIO | MFP_LPM_DRIVE_HIGH,	/* SYS_RESTART */
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO11_GPIO,				/* mmc detect */
-
-	/* usb to external transceiver */
-	GPIO34_USB_P2_2,
-	GPIO35_USB_P2_1,
-	GPIO36_USB_P2_4,
-	GPIO39_USB_P2_6,
-	GPIO40_USB_P2_5,
-	GPIO53_USB_P2_3,
-
-	/* usb to Neptune GSM chip */
-	GPIO30_USB_P3_2,
-	GPIO31_USB_P3_6,
-	GPIO90_USB_P3_5,
-	GPIO91_USB_P3_1,
-	GPIO56_USB_P3_4,
-	GPIO113_USB_P3_3,
-};
-
-#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
-static unsigned long gen1_pin_config[] __initdata = {
-	/* flip / lockswitch */
-	GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
-
-	/* bluetooth (bcm2035) */
-	GPIO14_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
-	GPIO48_GPIO,				/* RESET */
-	GPIO28_GPIO,				/* WAKEUP */
-
-	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
-	GPIO57_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
-	GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI2 */
-	GPIO82_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
-	GPIO99_GPIO | MFP_LPM_DRIVE_HIGH,	/* TC_MM_EN */
-
-	/* sound */
-	GPIO52_SSP3_SCLK,
-	GPIO83_SSP3_SFRM,
-	GPIO81_SSP3_TXD,
-	GPIO89_SSP3_RXD,
-
-	/* ssp2 pins to in */
-	GPIO22_GPIO,				/* SSP2_SCLK */
-	GPIO37_GPIO,				/* SSP2_SFRM */
-	GPIO38_GPIO,				/* SSP2_TXD */
-	GPIO88_GPIO,				/* SSP2_RXD */
-
-	/* camera */
-	GPIO23_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO85_CIF_LV,
-	GPIO84_CIF_FV,
-	GPIO27_CIF_DD_0,
-	GPIO114_CIF_DD_1,
-	GPIO51_CIF_DD_2,
-	GPIO115_CIF_DD_3,
-	GPIO95_CIF_DD_4,
-	GPIO94_CIF_DD_5,
-	GPIO17_CIF_DD_6,
-	GPIO108_CIF_DD_7,
-	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
-	GPIO19_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
-
-	/* EMU */
-	GPIO120_GPIO,				/* EMU_MUX1 */
-	GPIO119_GPIO,				/* EMU_MUX2 */
-	GPIO86_GPIO,				/* SNP_INT_CTL */
-	GPIO87_GPIO,				/* SNP_INT_IN */
-};
-#endif
-
-#if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \
-	defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
-static unsigned long gen2_pin_config[] __initdata = {
-	/* flip / lockswitch */
-	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
-
-	/* EOC */
-	GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
-
-	/* bluetooth (bcm2045) */
-	GPIO13_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
-	GPIO37_GPIO,				/* RESET */
-	GPIO57_GPIO,				/* WAKEUP */
-
-	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
-	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_FALL,	/* WDI */
-	GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
-	GPIO41_GPIO,				/* BP_FLASH */
-
-	/* sound */
-	GPIO52_SSP3_SCLK,
-	GPIO83_SSP3_SFRM,
-	GPIO81_SSP3_TXD,
-	GPIO82_SSP3_RXD,
-
-	/* ssp2 pins to in */
-	GPIO22_GPIO,				/* SSP2_SCLK */
-	GPIO14_GPIO,				/* SSP2_SFRM */
-	GPIO38_GPIO,				/* SSP2_TXD */
-	GPIO88_GPIO,				/* SSP2_RXD */
-
-	/* camera */
-	GPIO23_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO85_CIF_LV,
-	GPIO84_CIF_FV,
-	GPIO27_CIF_DD_0,
-	GPIO114_CIF_DD_1,
-	GPIO51_CIF_DD_2,
-	GPIO115_CIF_DD_3,
-	GPIO95_CIF_DD_4,
-	GPIO48_CIF_DD_5,
-	GPIO93_CIF_DD_6,
-	GPIO12_CIF_DD_7,
-	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
-	GPIO28_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
-	GPIO17_GPIO,				/* CAM_FLASH */
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_A780
-static unsigned long a780_pin_config[] __initdata = {
-	/* keypad */
-	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-
-	/* attenuate sound */
-	GPIO96_GPIO,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_E680
-static unsigned long e680_pin_config[] __initdata = {
-	/* keypad */
-	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-
-	/* MIDI */
-	GPIO79_GPIO,				/* VA_SEL_BUL */
-	GPIO80_GPIO,				/* FLT_SEL_BUL */
-	GPIO78_GPIO,				/* MIDI_RESET */
-	GPIO33_GPIO,				/* MIDI_CS */
-	GPIO15_GPIO,				/* MIDI_IRQ */
-	GPIO49_GPIO,				/* MIDI_NPWE */
-	GPIO18_GPIO,				/* MIDI_RDY */
-
-	/* leds */
-	GPIO46_GPIO,
-	GPIO47_GPIO,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_A1200
-static unsigned long a1200_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_A910
-static unsigned long a910_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-
-	/* WLAN */
-	GPIO89_GPIO,				/* RESET */
-	GPIO33_GPIO,				/* WAKEUP */
-	GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
-
-	/* MMC CS */
-	GPIO20_GPIO,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_E2
-static unsigned long e2_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_E6
-static unsigned long e6_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-};
-#endif
-
-/* KEYPAD */
-#ifdef CONFIG_MACH_EZX_A780
-static const unsigned int a780_key_map[] = {
-	KEY(0, 0, KEY_SEND),
-	KEY(0, 1, KEY_BACK),
-	KEY(0, 2, KEY_END),
-	KEY(0, 3, KEY_PAGEUP),
-	KEY(0, 4, KEY_UP),
-
-	KEY(1, 0, KEY_NUMERIC_1),
-	KEY(1, 1, KEY_NUMERIC_2),
-	KEY(1, 2, KEY_NUMERIC_3),
-	KEY(1, 3, KEY_SELECT),
-	KEY(1, 4, KEY_KPENTER),
-
-	KEY(2, 0, KEY_NUMERIC_4),
-	KEY(2, 1, KEY_NUMERIC_5),
-	KEY(2, 2, KEY_NUMERIC_6),
-	KEY(2, 3, KEY_RECORD),
-	KEY(2, 4, KEY_LEFT),
-
-	KEY(3, 0, KEY_NUMERIC_7),
-	KEY(3, 1, KEY_NUMERIC_8),
-	KEY(3, 2, KEY_NUMERIC_9),
-	KEY(3, 3, KEY_HOME),
-	KEY(3, 4, KEY_RIGHT),
-
-	KEY(4, 0, KEY_NUMERIC_STAR),
-	KEY(4, 1, KEY_NUMERIC_0),
-	KEY(4, 2, KEY_NUMERIC_POUND),
-	KEY(4, 3, KEY_PAGEDOWN),
-	KEY(4, 4, KEY_DOWN),
-};
-
-static struct matrix_keymap_data a780_matrix_keymap_data = {
-	.keymap			= a780_key_map,
-	.keymap_size		= ARRAY_SIZE(a780_key_map),
-};
-
-static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 5,
-	.matrix_keymap_data = &a780_matrix_keymap_data,
-
-	.direct_key_map = { KEY_CAMERA },
-	.direct_key_num = 1,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_A780 */
-
-#ifdef CONFIG_MACH_EZX_E680
-static const unsigned int e680_key_map[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_RESERVED),
-	KEY(0, 3, KEY_SEND),
-
-	KEY(1, 0, KEY_DOWN),
-	KEY(1, 1, KEY_LEFT),
-	KEY(1, 2, KEY_PAGEUP),
-	KEY(1, 3, KEY_PAGEDOWN),
-
-	KEY(2, 0, KEY_RESERVED),
-	KEY(2, 1, KEY_RESERVED),
-	KEY(2, 2, KEY_RESERVED),
-	KEY(2, 3, KEY_KPENTER),
-};
-
-static struct matrix_keymap_data e680_matrix_keymap_data = {
-	.keymap			= e680_key_map,
-	.keymap_size		= ARRAY_SIZE(e680_key_map),
-};
-
-static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
-	.matrix_key_rows = 3,
-	.matrix_key_cols = 4,
-	.matrix_keymap_data = &e680_matrix_keymap_data,
-
-	.direct_key_map = {
-		KEY_CAMERA,
-		KEY_RESERVED,
-		KEY_RESERVED,
-		KEY_F1,
-		KEY_CANCEL,
-		KEY_F2,
-	},
-	.direct_key_num = 6,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_E680 */
-
-#ifdef CONFIG_MACH_EZX_A1200
-static const unsigned int a1200_key_map[] = {
-	KEY(0, 0, KEY_RESERVED),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_PAGEDOWN),
-	KEY(0, 3, KEY_RESERVED),
-	KEY(0, 4, KEY_RESERVED),
-	KEY(0, 5, KEY_RESERVED),
-
-	KEY(1, 0, KEY_RESERVED),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_CAMERA),
-	KEY(1, 3, KEY_RESERVED),
-	KEY(1, 4, KEY_RESERVED),
-	KEY(1, 5, KEY_RESERVED),
-
-	KEY(2, 0, KEY_RESERVED),
-	KEY(2, 1, KEY_KPENTER),
-	KEY(2, 2, KEY_RECORD),
-	KEY(2, 3, KEY_RESERVED),
-	KEY(2, 4, KEY_RESERVED),
-	KEY(2, 5, KEY_SELECT),
-
-	KEY(3, 0, KEY_RESERVED),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_RESERVED),
-	KEY(3, 4, KEY_RESERVED),
-	KEY(3, 5, KEY_RESERVED),
-
-	KEY(4, 0, KEY_RESERVED),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_PAGEUP),
-	KEY(4, 3, KEY_RESERVED),
-	KEY(4, 4, KEY_RESERVED),
-	KEY(4, 5, KEY_RESERVED),
-};
-
-static struct matrix_keymap_data a1200_matrix_keymap_data = {
-	.keymap			= a1200_key_map,
-	.keymap_size		= ARRAY_SIZE(a1200_key_map),
-};
-
-static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_keymap_data = &a1200_matrix_keymap_data,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_A1200 */
-
-#ifdef CONFIG_MACH_EZX_E6
-static const unsigned int e6_key_map[] = {
-	KEY(0, 0, KEY_RESERVED),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_PAGEDOWN),
-	KEY(0, 3, KEY_RESERVED),
-	KEY(0, 4, KEY_RESERVED),
-	KEY(0, 5, KEY_NEXTSONG),
-
-	KEY(1, 0, KEY_RESERVED),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_PROG1),
-	KEY(1, 3, KEY_RESERVED),
-	KEY(1, 4, KEY_RESERVED),
-	KEY(1, 5, KEY_RESERVED),
-
-	KEY(2, 0, KEY_RESERVED),
-	KEY(2, 1, KEY_ENTER),
-	KEY(2, 2, KEY_CAMERA),
-	KEY(2, 3, KEY_RESERVED),
-	KEY(2, 4, KEY_RESERVED),
-	KEY(2, 5, KEY_WWW),
-
-	KEY(3, 0, KEY_RESERVED),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_RESERVED),
-	KEY(3, 4, KEY_RESERVED),
-	KEY(3, 5, KEY_PLAYPAUSE),
-
-	KEY(4, 0, KEY_RESERVED),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_PAGEUP),
-	KEY(4, 3, KEY_RESERVED),
-	KEY(4, 4, KEY_RESERVED),
-	KEY(4, 5, KEY_PREVIOUSSONG),
-};
-
-static struct matrix_keymap_data e6_keymap_data = {
-	.keymap			= e6_key_map,
-	.keymap_size		= ARRAY_SIZE(e6_key_map),
-};
-
-static struct pxa27x_keypad_platform_data e6_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_keymap_data = &e6_keymap_data,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_E6 */
-
-#ifdef CONFIG_MACH_EZX_A910
-static const unsigned int a910_key_map[] = {
-	KEY(0, 0, KEY_NUMERIC_6),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_PAGEDOWN),
-	KEY(0, 3, KEY_KPENTER),
-	KEY(0, 4, KEY_NUMERIC_5),
-	KEY(0, 5, KEY_CAMERA),
-
-	KEY(1, 0, KEY_NUMERIC_8),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_RESERVED),
-	KEY(1, 3, KEY_F1), /* Left SoftKey */
-	KEY(1, 4, KEY_NUMERIC_STAR),
-	KEY(1, 5, KEY_RESERVED),
-
-	KEY(2, 0, KEY_NUMERIC_7),
-	KEY(2, 1, KEY_NUMERIC_9),
-	KEY(2, 2, KEY_RECORD),
-	KEY(2, 3, KEY_F2), /* Right SoftKey */
-	KEY(2, 4, KEY_BACK),
-	KEY(2, 5, KEY_SELECT),
-
-	KEY(3, 0, KEY_NUMERIC_2),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_NUMERIC_0),
-	KEY(3, 4, KEY_NUMERIC_1),
-	KEY(3, 5, KEY_RECORD),
-
-	KEY(4, 0, KEY_NUMERIC_4),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_PAGEUP),
-	KEY(4, 3, KEY_NUMERIC_POUND),
-	KEY(4, 4, KEY_NUMERIC_3),
-	KEY(4, 5, KEY_RESERVED),
-};
-
-static struct matrix_keymap_data a910_matrix_keymap_data = {
-	.keymap			= a910_key_map,
-	.keymap_size		= ARRAY_SIZE(a910_key_map),
-};
-
-static struct pxa27x_keypad_platform_data a910_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_keymap_data = &a910_matrix_keymap_data,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_A910 */
-
-#ifdef CONFIG_MACH_EZX_E2
-static const unsigned int e2_key_map[] = {
-	KEY(0, 0, KEY_NUMERIC_6),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_NUMERIC_9),
-	KEY(0, 3, KEY_NEXTSONG),
-	KEY(0, 4, KEY_NUMERIC_5),
-	KEY(0, 5, KEY_F1), /* Left SoftKey */
-
-	KEY(1, 0, KEY_NUMERIC_8),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_RESERVED),
-	KEY(1, 3, KEY_PAGEUP),
-	KEY(1, 4, KEY_NUMERIC_STAR),
-	KEY(1, 5, KEY_F2), /* Right SoftKey */
-
-	KEY(2, 0, KEY_NUMERIC_7),
-	KEY(2, 1, KEY_KPENTER),
-	KEY(2, 2, KEY_RECORD),
-	KEY(2, 3, KEY_PAGEDOWN),
-	KEY(2, 4, KEY_BACK),
-	KEY(2, 5, KEY_NUMERIC_0),
-
-	KEY(3, 0, KEY_NUMERIC_2),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_PLAYPAUSE),
-	KEY(3, 4, KEY_NUMERIC_1),
-	KEY(3, 5, KEY_SOUND), /* Music SoftKey */
-
-	KEY(4, 0, KEY_NUMERIC_4),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_NUMERIC_POUND),
-	KEY(4, 3, KEY_PREVIOUSSONG),
-	KEY(4, 4, KEY_NUMERIC_3),
-	KEY(4, 5, KEY_RESERVED),
-};
-
-static struct matrix_keymap_data e2_matrix_keymap_data = {
-	.keymap			= e2_key_map,
-	.keymap_size		= ARRAY_SIZE(e2_key_map),
-};
-
-static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_keymap_data = &e2_matrix_keymap_data,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_E2 */
-
-#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_A910)
-/* camera */
-static struct regulator_consumer_supply camera_regulator_supplies[] = {
-	REGULATOR_SUPPLY("vdd", "0-005d"),
-};
-
-static struct regulator_init_data camera_regulator_initdata = {
-	.consumer_supplies = camera_regulator_supplies,
-	.num_consumer_supplies = ARRAY_SIZE(camera_regulator_supplies),
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config camera_regulator_config = {
-	.supply_name		= "camera_vdd",
-	.microvolts		= 2800000,
-	.init_data		= &camera_regulator_initdata,
-};
-
-static struct platform_device camera_supply_regulator_device = {
-	.name	= "reg-fixed-voltage",
-	.id	= 1,
-	.dev	= {
-		.platform_data = &camera_regulator_config,
-	},
-};
-
-static struct gpiod_lookup_table camera_supply_gpiod_table = {
-	.dev_id = "reg-fixed-voltage.1",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO50_nCAM_EN,
-			    NULL, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_A780
-/* gpio_keys */
-static struct gpio_keys_button a780_buttons[] = {
-	[0] = {
-		.code       = SW_LID,
-		.gpio       = GPIO12_A780_FLIP_LID,
-		.active_low = 0,
-		.desc       = "A780 flip lid",
-		.type       = EV_SW,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
-	.buttons  = a780_buttons,
-	.nbuttons = ARRAY_SIZE(a780_buttons),
-};
-
-static struct platform_device a780_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &a780_gpio_keys_platform_data,
-	},
-};
-
-/* camera */
-static int a780_camera_reset(struct device *dev)
-{
-	gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
-	msleep(10);
-	gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
-
-	return 0;
-}
-
-static int a780_camera_init(void)
-{
-	int err;
-
-	/*
-	 * GPIO50_nCAM_EN is active low
-	 * GPIO19_GEN1_CAM_RST is active on rising edge
-	 */
-	err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
-	if (err) {
-		pr_err("%s: Failed to request CAM_RST\n", __func__);
-		return err;
-	}
-
-	gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
-	a780_camera_reset(NULL);
-
-	return 0;
-}
-
-struct pxacamera_platform_data a780_pxacamera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN |
-		PXA_CAMERA_PCP,
-	.mclk_10khz = 5000,
-	.sensor_i2c_adapter_id = 0,
-	.sensor_i2c_address = 0x5d,
-};
-
-static struct i2c_board_info a780_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("mt9m111", 0x5d),
-	},
-};
-
-static struct platform_device *a780_devices[] __initdata = {
-	&a780_gpio_keys,
-	&camera_supply_regulator_device,
-};
-
-static void __init a780_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(a780_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_1);
-
-	pxa_set_keypad_info(&a780_keypad_platform_data);
-
-	if (a780_camera_init() == 0)
-		pxa_set_camera_info(&a780_pxacamera_platform_data);
-
-	gpiod_add_lookup_table(&camera_supply_gpiod_table);
-	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(EZX_A780, "Motorola EZX A780")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = a780_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_E680
-/* gpio_keys */
-static struct gpio_keys_button e680_buttons[] = {
-	[0] = {
-		.code       = KEY_SCREENLOCK,
-		.gpio       = GPIO12_E680_LOCK_SWITCH,
-		.active_low = 0,
-		.desc       = "E680 lock switch",
-		.type       = EV_KEY,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
-	.buttons  = e680_buttons,
-	.nbuttons = ARRAY_SIZE(e680_buttons),
-};
-
-static struct platform_device e680_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &e680_gpio_keys_platform_data,
-	},
-};
-
-static struct i2c_board_info __initdata e680_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *e680_devices[] __initdata = {
-	&e680_gpio_keys,
-};
-
-static void __init e680_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_1);
-
-	pxa_set_keypad_info(&e680_keypad_platform_data);
-
-	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(e680_devices));
-}
-
-MACHINE_START(EZX_E680, "Motorola EZX E680")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = e680_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_A1200
-/* gpio_keys */
-static struct gpio_keys_button a1200_buttons[] = {
-	[0] = {
-		.code       = SW_LID,
-		.gpio       = GPIO15_A1200_FLIP_LID,
-		.active_low = 0,
-		.desc       = "A1200 flip lid",
-		.type       = EV_SW,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
-	.buttons  = a1200_buttons,
-	.nbuttons = ARRAY_SIZE(a1200_buttons),
-};
-
-static struct platform_device a1200_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &a1200_gpio_keys_platform_data,
-	},
-};
-
-static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *a1200_devices[] __initdata = {
-	&a1200_gpio_keys,
-};
-
-static void __init a1200_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&a1200_keypad_platform_data);
-
-	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
-}
-
-MACHINE_START(EZX_A1200, "Motorola EZX A1200")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = a1200_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_A910
-/* gpio_keys */
-static struct gpio_keys_button a910_buttons[] = {
-	[0] = {
-		.code       = SW_LID,
-		.gpio       = GPIO15_A910_FLIP_LID,
-		.active_low = 0,
-		.desc       = "A910 flip lid",
-		.type       = EV_SW,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
-	.buttons  = a910_buttons,
-	.nbuttons = ARRAY_SIZE(a910_buttons),
-};
-
-static struct platform_device a910_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &a910_gpio_keys_platform_data,
-	},
-};
-
-/* camera */
-static int a910_camera_reset(struct device *dev)
-{
-	gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
-	msleep(10);
-	gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
-
-	return 0;
-}
-
-static int a910_camera_init(void)
-{
-	int err;
-
-	/*
-	 * GPIO50_nCAM_EN is active low
-	 * GPIO28_GEN2_CAM_RST is active on rising edge
-	 */
-	err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
-	if (err) {
-		pr_err("%s: Failed to request CAM_RST\n", __func__);
-		return err;
-	}
-
-	gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
-	a910_camera_reset(NULL);
-
-	return 0;
-}
-
-struct pxacamera_platform_data a910_pxacamera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN |
-		PXA_CAMERA_PCP,
-	.mclk_10khz = 5000,
-	.sensor_i2c_adapter_id = 0,
-	.sensor_i2c_address = 0x5d,
-};
-
-/* leds-lp3944 */
-static struct lp3944_platform_data a910_lp3944_leds = {
-	.leds_size = LP3944_LEDS_MAX,
-	.leds = {
-		[0] = {
-			.name = "a910:red:",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		[1] = {
-			.name = "a910:green:",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		[2] {
-			.name = "a910:blue:",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		/* Leds 3 and 4 are used as display power switches */
-		[3] = {
-			.name = "a910::cli_display",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED_INVERTED
-		},
-		[4] = {
-			.name = "a910::main_display",
-			.status = LP3944_LED_STATUS_ON,
-			.type = LP3944_LED_TYPE_LED_INVERTED
-		},
-		[5] = { .type = LP3944_LED_TYPE_NONE },
-		[6] = {
-			.name = "a910::torch",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		[7] = {
-			.name = "a910::flash",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED_INVERTED,
-		},
-	},
-};
-
-static struct i2c_board_info __initdata a910_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("lp3944", 0x60),
-		.platform_data = &a910_lp3944_leds,
-	},
-	{
-		I2C_BOARD_INFO("mt9m111", 0x5d),
-	},
-};
-
-static struct platform_device *a910_devices[] __initdata = {
-	&a910_gpio_keys,
-	&camera_supply_regulator_device,
-};
-
-static void __init a910_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&a910_keypad_platform_data);
-
-	if (a910_camera_init() == 0)
-		pxa_set_camera_info(&a910_pxacamera_platform_data);
-
-	gpiod_add_lookup_table(&camera_supply_gpiod_table);
-	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(EZX_A910, "Motorola EZX A910")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = a910_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_E6
-/* gpio_keys */
-static struct gpio_keys_button e6_buttons[] = {
-	[0] = {
-		.code       = KEY_SCREENLOCK,
-		.gpio       = GPIO15_E6_LOCK_SWITCH,
-		.active_low = 0,
-		.desc       = "E6 lock switch",
-		.type       = EV_KEY,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
-	.buttons  = e6_buttons,
-	.nbuttons = ARRAY_SIZE(e6_buttons),
-};
-
-static struct platform_device e6_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &e6_gpio_keys_platform_data,
-	},
-};
-
-static struct i2c_board_info __initdata e6_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *e6_devices[] __initdata = {
-	&e6_gpio_keys,
-};
-
-static void __init e6_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&e6_keypad_platform_data);
-
-	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(e6_devices));
-}
-
-MACHINE_START(EZX_E6, "Motorola EZX E6")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = e6_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_E2
-static struct i2c_board_info __initdata e2_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *e2_devices[] __initdata = {
-};
-
-static void __init e2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&e2_keypad_platform_data);
-
-	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(e2_devices));
-}
-
-MACHINE_START(EZX_E2, "Motorola EZX E2")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = e2_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 7bb1499de4c5..c9c2c46ecead 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -27,7 +27,6 @@ extern void __init pxa25x_map_io(void);
 extern void __init pxa26x_init_irq(void);
 
 #define pxa27x_handle_irq ichp_handle_irq
-extern unsigned	pxa27x_get_clk_frequency_khz(int);
 extern void __init pxa27x_init_irq(void);
 extern void __init pxa27x_map_io(void);
 
@@ -52,18 +51,4 @@ extern void pxa2xx_clear_reset_status(unsigned int);
 static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
 #endif
 
-/*
- * Once fully converted to the clock framework, all these functions should be
- * removed, and replaced with a clk_get(NULL, "core").
- */
-#ifdef CONFIG_PXA25x
-extern unsigned pxa25x_get_clk_frequency_khz(int);
-#else
-#define pxa25x_get_clk_frequency_khz(x)		(0)
-#endif
-
-#ifdef CONFIG_PXA27x
-#else
-#define pxa27x_get_clk_frequency_khz(x)		(0)
-#endif
 
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 72b08a9bf0fd..1713bdf3b71e 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -21,12 +21,13 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/gpio/machine.h>
+#include <linux/gpio/property.h>
 #include <linux/gpio.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 
 #include <asm/setup.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <linux/sizes.h>
@@ -40,6 +41,7 @@
 #include <linux/platform_data/mmc-pxamci.h>
 #include "udc.h"
 #include "gumstix.h"
+#include "devices.h"
 
 #include "generic.h"
 
@@ -90,7 +92,7 @@ static struct pxamci_platform_data gumstix_mci_platform_data = {
 
 static void __init gumstix_mmc_init(void)
 {
-	pxa_set_mci_info(&gumstix_mci_platform_data);
+	pxa_set_mci_info(&gumstix_mci_platform_data, NULL);
 }
 #else
 static void __init gumstix_mmc_init(void)
@@ -99,27 +101,24 @@ static void __init gumstix_mmc_init(void)
 }
 #endif
 
-#ifdef CONFIG_USB_PXA25X
-static struct gpiod_lookup_table gumstix_gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_GUMSTIX_USB_GPIOn,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_GUMSTIX_USB_GPIOx,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
+#if IS_ENABLED(CONFIG_USB_PXA25X)
+static const struct property_entry gumstix_vbus_props[] __initconst = {
+	PROPERTY_ENTRY_GPIO("vbus-gpios", &pxa2xx_gpiochip_node,
+			    GPIO_GUMSTIX_USB_GPIOn, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("pullup-gpios", &pxa2xx_gpiochip_node,
+			    GPIO_GUMSTIX_USB_GPIOx, GPIO_ACTIVE_HIGH),
+	{ }
 };
 
-static struct platform_device gumstix_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
+static const struct platform_device_info gumstix_gpio_vbus_info __initconst = {
+	.name		= "gpio-vbus",
+	.id		= PLATFORM_DEVID_NONE,
+	.properties	= gumstix_vbus_props,
 };
 
 static void __init gumstix_udc_init(void)
 {
-	gpiod_add_lookup_table(&gumstix_gpio_vbus_gpiod_table);
-	platform_device_register(&gumstix_gpio_vbus);
+	platform_device_register_full(&gumstix_gpio_vbus_info);
 }
 #else
 static void gumstix_udc_init(void)
@@ -233,7 +232,6 @@ MACHINE_START(GUMSTIX, "Gumstix")
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
 	.init_time	= pxa_timer_init,
 	.init_machine	= gumstix_init,
 	.restart	= pxa_restart,
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
deleted file mode 100644
index 212efe24aedb..000000000000
--- a/arch/arm/mach-pxa/h5000.c
+++ /dev/null
@@ -1,210 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Hardware definitions for HP iPAQ h5xxx Handheld Computers
- *
- * Copyright 2000-2003  Hewlett-Packard Company.
- * Copyright 2002       Jamey Hicks <jamey.hicks@hp.com>
- * Copyright 2004-2005  Phil Blundell <pb@handhelds.org>
- * Copyright 2007-2008  Anton Vorontsov <cbouatmailru@gmail.com>
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/irq.h>
-
-#include "pxa25x.h"
-#include "h5000.h"
-#include "udc.h"
-#include "smemc.h"
-
-#include "generic.h"
-
-/*
- * Flash
- */
-
-static struct mtd_partition h5000_flash0_partitions[] = {
-	{
-		.name = "bootldr",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	{
-		.name = "root",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-	},
-};
-
-static struct mtd_partition h5000_flash1_partitions[] = {
-	{
-		.name = "second root",
-		.size = SZ_16M - 0x00040000,
-		.offset = 0,
-	},
-	{
-		.name = "asset",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-		.mask_flags = MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data h5000_flash0_data = {
-	.width = 4,
-	.parts = h5000_flash0_partitions,
-	.nr_parts = ARRAY_SIZE(h5000_flash0_partitions),
-};
-
-static struct physmap_flash_data h5000_flash1_data = {
-	.width = 4,
-	.parts = h5000_flash1_partitions,
-	.nr_parts = ARRAY_SIZE(h5000_flash1_partitions),
-};
-
-static struct resource h5000_flash0_resources = {
-	.start = PXA_CS0_PHYS,
-	.end = PXA_CS0_PHYS + SZ_32M - 1,
-	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct resource h5000_flash1_resources = {
-	.start = PXA_CS0_PHYS + SZ_32M,
-	.end = PXA_CS0_PHYS + SZ_32M + SZ_16M - 1,
-	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct platform_device h5000_flash[] = {
-	{
-		.name = "physmap-flash",
-		.id = 0,
-		.resource = &h5000_flash0_resources,
-		.num_resources = 1,
-		.dev = {
-			.platform_data = &h5000_flash0_data,
-		},
-	},
-	{
-		.name = "physmap-flash",
-		.id = 1,
-		.resource = &h5000_flash1_resources,
-		.num_resources = 1,
-		.dev = {
-			.platform_data = &h5000_flash1_data,
-		},
-	},
-};
-
-/*
- * USB Device Controller
- */
-
-static struct pxa2xx_udc_mach_info h5000_udc_mach_info __initdata = {
-	.gpio_pullup = H5000_GPIO_USB_PULLUP,
-};
-
-/*
- * GPIO setup
- */
-
-static unsigned long h5000_pin_config[] __initdata = {
-	/* Crystal and Clock Signals */
-	GPIO12_32KHz,
-
-	/* SDRAM and Static Memory I/O Signals */
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO32_I2S_SYSCLK,
-};
-
-/*
- * Localbus setup:
- * CS0: Flash;
- * CS1: MediaQ chip, select 16-bit bus and vlio;
- * CS5: SAMCOP.
- */
-
-static void fix_msc(void)
-{
-	__raw_writel(0x129c24f2, MSC0);
-	__raw_writel(0x7ff424fa, MSC1);
-	__raw_writel(0x7ff47ff4, MSC2);
-
-	__raw_writel(__raw_readl(MDREFR) | 0x02080000, MDREFR);
-}
-
-/*
- * Platform devices
- */
-
-static struct platform_device *devices[] __initdata = {
-	&h5000_flash[0],
-	&h5000_flash[1],
-};
-
-static void __init h5000_init(void)
-{
-	fix_msc();
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_udc_info(&h5000_udc_mach_info);
-	platform_add_devices(ARRAY_AND_SIZE(devices));
-}
-
-MACHINE_START(H5400, "HP iPAQ H5000")
-	.atag_offset = 0x100,
-	.map_io = pxa25x_map_io,
-	.nr_irqs = PXA_NR_IRQS,
-	.init_irq = pxa25x_init_irq,
-	.handle_irq = pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine = h5000_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/h5000.h b/arch/arm/mach-pxa/h5000.h
deleted file mode 100644
index 58687e94a0c7..000000000000
--- a/arch/arm/mach-pxa/h5000.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Hardware definitions for HP iPAQ h5xxx Handheld Computers
- *
- * Copyright(20)02 Hewlett-Packard Company.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks
- */
-
-#ifndef __ASM_ARCH_H5000_H
-#define __ASM_ARCH_H5000_H
-
-#include "mfp-pxa25x.h"
-
-/*
- * CPU GPIOs
- */
-
-#define H5000_GPIO_POWER_BUTTON   (0)
-#define H5000_GPIO_RESET_BUTTON_N (1)
-#define H5000_GPIO_OPT_INT        (2)
-#define H5000_GPIO_BACKUP_POWER   (3)
-#define H5000_GPIO_ACTION_BUTTON  (4)
-#define H5000_GPIO_COM_DCD_SOMETHING  (5) /* what is this really ? */
-/* 6 not connected */
-#define H5000_GPIO_RESET_BUTTON_AGAIN_N (7) /* connected to gpio 1 as well */
-/* 8 not connected */
-#define H5000_GPIO_RSO_N          (9)       /* reset output from max1702 which regulates 3.3 and 2.5 */
-#define H5000_GPIO_ASIC_INT_N   (10)       /* from companion asic */
-#define H5000_GPIO_BT_ENV_0     (11)       /* to LMX9814, set to 1 according to regdump */
-/*(12) not connected */
-#define H5000_GPIO_BT_ENV_1     (13)       /* to LMX9814, set to 1 according to regdump */
-#define H5000_GPIO_BT_WU        (14)       /* from LMX9814, Defined as HOST_WAKEUP in the LMX9820 data sheet */
-/*(15) is CS1# */
-/*(16) not connected */
-/*(17) not connected */
-/*(18) is pcmcia ready */
-/*(19) is dreq1 */
-/*(20) is dreq0 */
-#define H5000_GPIO_OE_RD_NWR	(21)       /* output enable on rd/nwr signal to companion asic */
-/*(22) is not connected */
-#define H5000_GPIO_OPT_SPI_CLK  (23)       /* to extension pack */
-#define H5000_GPIO_OPT_SPI_CS_N (24)       /* to extension pack */
-#define H5000_GPIO_OPT_SPI_DOUT (25)       /* to extension pack */
-#define H5000_GPIO_OPT_SPI_DIN  (26)       /* to extension pack */
-/*(27) not connected */
-#define H5000_GPIO_I2S_BITCLK   (28)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_DATAOUT  (29)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_DATAIN   (30)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_LRCLK    (31)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_SYSCLK   (32)       /* connected to AC97 codec */
-/*(33) is CS5# */
-#define H5000_GPIO_COM_RXD      (34)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_CTS      (35)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_DCD      (36)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_DSR      (37)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_RI       (38)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_TXD      (39)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_DTR      (40)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_RTS      (41)       /* connected to cradle/cable connector */
-
-#define H5000_GPIO_BT_RXD       (42)       /* connected to BT (LMX9814) */
-#define H5000_GPIO_BT_TXD       (43)       /* connected to BT (LMX9814) */
-#define H5000_GPIO_BT_CTS       (44)       /* connected to BT (LMX9814) */
-#define H5000_GPIO_BT_RTS       (45)       /* connected to BT (LMX9814) */
-
-#define H5000_GPIO_IRDA_RXD     (46)
-#define H5000_GPIO_IRDA_TXD     (47)
-
-#define H5000_GPIO_POE_N        (48)       /* used for pcmcia */
-#define H5000_GPIO_PWE_N        (49)       /* used for pcmcia */
-#define H5000_GPIO_PIOR_N       (50)       /* used for pcmcia */
-#define H5000_GPIO_PIOW_N       (51)       /* used for pcmcia */
-#define H5000_GPIO_PCE1_N       (52)       /* used for pcmcia */
-#define H5000_GPIO_PCE2_N       (53)       /* used for pcmcia */
-#define H5000_GPIO_PSKTSEL      (54)       /* used for pcmcia */
-#define H5000_GPIO_PREG_N       (55)       /* used for pcmcia */
-#define H5000_GPIO_PWAIT_N      (56)       /* used for pcmcia */
-#define H5000_GPIO_IOIS16_N     (57)       /* used for pcmcia */
-
-#define H5000_GPIO_IRDA_SD      (58)       /* to hsdl3002 sd */
-/*(59) not connected */
-#define H5000_GPIO_POWER_SD_N   (60)       /* controls power to SD */
-#define H5000_GPIO_POWER_RS232_N	(61)       /* inverted FORCEON to rs232 transceiver */
-#define H5000_GPIO_POWER_ACCEL_N	(62)       /* controls power to accel */
-/*(63) is not connected */
-#define H5000_GPIO_OPT_NVRAM    (64)       /* controls power to expansion pack */
-#define H5000_GPIO_CHG_EN       (65)       /* to sc801 en */
-#define H5000_GPIO_USB_PULLUP   (66)       /* USB d+ pullup via 1.5K resistor */
-#define H5000_GPIO_BT_2V8_N     (67)       /* 2.8V used by bluetooth */
-#define H5000_GPIO_EXT_CHG_RATE (68)       /* enables external charging rate */
-/*(69) is not connected */
-#define H5000_GPIO_CIR_RESET    (70)       /* consumer IR reset */
-#define H5000_GPIO_POWER_LIGHT_SENSOR_N	(71)
-#define H5000_GPIO_BT_M_RESET   (72)
-#define H5000_GPIO_STD_CHG_RATE (73)
-#define H5000_GPIO_SD_WP_N      (74)
-#define H5000_GPIO_MOTOR_ON_N   (75)       /* external pullup on this */
-#define H5000_GPIO_HEADPHONE_DETECT	(76)
-#define H5000_GPIO_USB_CHG_RATE (77)       /* select rate for charging via usb */
-/*(78) is CS2# */
-/*(79) is CS3# */
-/*(80) is CS4# */
-
-#endif /* __ASM_ARCH_H5000_H */
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
deleted file mode 100644
index 469ffeec6da5..000000000000
--- a/arch/arm/mach-pxa/himalaya.c
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/himalaya.c
- *
- * Hardware definitions for the HTC Himalaya
- *
- * Based on 2.6.21-hh20's himalaya.c and himalaya_lcd.c
- *
- * Copyright (c) 2008 Zbynek Michl <Zbynek.Michl@seznam.cz>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/platform_device.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa25x.h"
-
-#include "generic.h"
-
-/* ---------------------- Himalaya LCD definitions -------------------- */
-
-static struct w100_gen_regs himalaya_lcd_regs = {
-	.lcd_format =        0x00000003,
-	.lcdd_cntl1 =        0x00000000,
-	.lcdd_cntl2 =        0x0003ffff,
-	.genlcd_cntl1 =      0x00fff003,
-	.genlcd_cntl2 =      0x00000003,
-	.genlcd_cntl3 =      0x000102aa,
-};
-
-static struct w100_mode himalaya4_lcd_mode = {
-	.xres 		= 240,
-	.yres 		= 320,
-	.left_margin 	= 0,
-	.right_margin 	= 31,
-	.upper_margin 	= 15,
-	.lower_margin 	= 0,
-	.crtc_ss	= 0x80150014,
-	.crtc_ls	= 0xa0fb00f7,
-	.crtc_gs	= 0xc0080007,
-	.crtc_vpos_gs	= 0x00080007,
-	.crtc_rev	= 0x0000000a,
-	.crtc_dclk	= 0x81700030,
-	.crtc_gclk	= 0x8015010f,
-	.crtc_goe	= 0x00000000,
-	.pll_freq 	= 80,
-	.pixclk_divider = 15,
-	.pixclk_divider_rotated = 15,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 0,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_mode himalaya6_lcd_mode = {
-	.xres 		= 240,
-	.yres 		= 320,
-	.left_margin 	= 9,
-	.right_margin 	= 8,
-	.upper_margin 	= 5,
-	.lower_margin 	= 4,
-	.crtc_ss	= 0x80150014,
-	.crtc_ls	= 0xa0fb00f7,
-	.crtc_gs	= 0xc0080007,
-	.crtc_vpos_gs	= 0x00080007,
-	.crtc_rev	= 0x0000000a,
-	.crtc_dclk	= 0xa1700030,
-	.crtc_gclk	= 0x8015010f,
-	.crtc_goe	= 0x00000000,
-	.pll_freq 	= 95,
-	.pixclk_divider = 0xb,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_gpio_regs himalaya_w100_gpio_info = {
-	.init_data1 = 0xffff0000,	/* GPIO_DATA  */
-	.gpio_dir1  = 0x00000000,	/* GPIO_CNTL1 */
-	.gpio_oe1   = 0x003c0000,	/* GPIO_CNTL2 */
-	.init_data2 = 0x00000000,	/* GPIO_DATA2 */
-	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */
-	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */
-};
-
-static struct w100fb_mach_info himalaya_fb_info = {
-	.num_modes  = 1,
-	.regs       = &himalaya_lcd_regs,
-	.gpio       = &himalaya_w100_gpio_info,
-	.xtal_freq = 16000000,
-};
-
-static struct resource himalaya_fb_resources[] = {
-	[0] = {
-		.start	= 0x08000000,
-		.end	= 0x08ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device himalaya_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &himalaya_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(himalaya_fb_resources),
-	.resource       = himalaya_fb_resources,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&himalaya_fb_device,
-};
-
-static void __init himalaya_lcd_init(void)
-{
-	int himalaya_boardid;
-
-	himalaya_boardid = 0x4; /* hardcoded (detection needs ASIC3 functions) */
-	printk(KERN_INFO "himalaya LCD Driver init. boardid=%d\n",
-		himalaya_boardid);
-
-	switch (himalaya_boardid) {
-	case 0x4:
-		himalaya_fb_info.modelist = &himalaya4_lcd_mode;
-	break;
-	case 0x6:
-		himalaya_fb_info.modelist = &himalaya6_lcd_mode;
-	break;
-	default:
-		printk(KERN_INFO "himalaya lcd_init: unknown boardid=%d. Using 0x4\n",
-			himalaya_boardid);
-		himalaya_fb_info.modelist = &himalaya4_lcd_mode;
-	}
-}
-
-static void __init himalaya_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	himalaya_lcd_init();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-
-MACHINE_START(HIMALAYA, "HTC Himalaya")
-	.atag_offset = 0x100,
-	.map_io = pxa25x_map_io,
-	.nr_irqs = PXA_NR_IRQS,
-	.init_irq = pxa25x_init_irq,
-	.handle_irq = pxa25x_handle_irq,
-	.init_machine = himalaya_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/hx4700-pcmcia.c b/arch/arm/mach-pxa/hx4700-pcmcia.c
deleted file mode 100644
index e2331dfe427d..000000000000
--- a/arch/arm/mach-pxa/hx4700-pcmcia.c
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include "hx4700.h"
-
-#include <pcmcia/soc_common.h>
-
-static struct gpio gpios[] = {
-	{ GPIO114_HX4700_CF_RESET,    GPIOF_OUT_INIT_LOW,   "CF reset"        },
-	{ EGPIO4_CF_3V3_ON,           GPIOF_OUT_INIT_LOW,   "CF 3.3V enable"  },
-};
-
-static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(gpios, ARRAY_SIZE(gpios));
-	if (ret)
-		goto out;
-
-	/*
-	 * IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
-	 * The asic3 default IRQ type is level trigger low level detect, exactly
-	 * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
-	 * If the IRQ type is not changed, the asic3 interrupt handler will loop
-	 * repeatedly because it is unable to clear the level trigger interrupt.
-	 */
-	irq_set_irq_type(gpio_to_irq(GPIOD4_CF_nCD), IRQ_TYPE_EDGE_BOTH);
-
-	skt->stat[SOC_STAT_CD].gpio = GPIOD4_CF_nCD;
-	skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
-	skt->stat[SOC_STAT_RDY].gpio = GPIO60_HX4700_CF_RNB;
-	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-
-out:
-	return ret;
-}
-
-static void hx4700_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(gpios, ARRAY_SIZE(gpios));
-}
-
-static void hx4700_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-	struct pcmcia_state *state)
-{
-	state->vs_3v = 1;
-	state->vs_Xv = 0;
-}
-
-static int hx4700_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-	const socket_state_t *state)
-{
-	switch (state->Vcc) {
-	case 0:
-		gpio_set_value(EGPIO4_CF_3V3_ON, 0);
-		break;
-	case 33:
-		gpio_set_value(EGPIO4_CF_3V3_ON, 1);
-		break;
-	default:
-		printk(KERN_ERR "pcmcia: Unsupported Vcc: %d\n", state->Vcc);
-		return -EINVAL;
-	}
-
-	gpio_set_value(GPIO114_HX4700_CF_RESET, (state->flags & SS_RESET) != 0);
-
-	return 0;
-}
-
-static struct pcmcia_low_level hx4700_pcmcia_ops = {
-	.owner          = THIS_MODULE,
-	.nr             = 1,
-	.hw_init        = hx4700_pcmcia_hw_init,
-	.hw_shutdown    = hx4700_pcmcia_hw_shutdown,
-	.socket_state   = hx4700_pcmcia_socket_state,
-	.configure_socket = hx4700_pcmcia_configure_socket,
-};
-
-static struct platform_device *hx4700_pcmcia_device;
-
-static int __init hx4700_pcmcia_init(void)
-{
-	struct platform_device *pdev;
-
-	if (!machine_is_h4700())
-		return -ENODEV;
-
-	pdev = platform_device_register_data(NULL, "pxa2xx-pcmcia", -1,
-		&hx4700_pcmcia_ops, sizeof(hx4700_pcmcia_ops));
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	hx4700_pcmcia_device = pdev;
-
-	return 0;
-}
-
-static void __exit hx4700_pcmcia_exit(void)
-{
-	platform_device_unregister(hx4700_pcmcia_device);
-}
-
-module_init(hx4700_pcmcia_init);
-module_exit(hx4700_pcmcia_exit);
-
-MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>");
-MODULE_DESCRIPTION("HP iPAQ hx4700 PCMCIA driver");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
deleted file mode 100644
index 2fd665944103..000000000000
--- a/arch/arm/mach-pxa/hx4700.c
+++ /dev/null
@@ -1,942 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Support for HP iPAQ hx4700 PDAs.
- *
- * Copyright (c) 2008-2009 Philipp Zabel
- *
- * Based on code:
- *    Copyright (c) 2004 Hewlett-Packard Company.
- *    Copyright (c) 2005 SDG Systems, LLC
- *    Copyright (c) 2006 Anton Vorontsov <cbou@mail.ru>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/input/navpoint.h>
-#include <linux/lcd.h>
-#include <linux/mfd/asic3.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pda_power.h>
-#include <linux/platform_data/gpio-htc-egpio.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/gpio-regulator.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max1586.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa27x.h"
-#include "addr-map.h"
-#include "hx4700.h"
-#include <linux/platform_data/irda-pxaficp.h>
-
-#include <sound/ak4641.h>
-#include <video/platform_lcd.h>
-#include <video/w100fb.h>
-
-#include "devices.h"
-#include "generic.h"
-#include "udc.h"
-
-/* Physical address space information */
-
-#define ATI_W3220_PHYS  PXA_CS2_PHYS /* ATI Imageon 3220 Graphics */
-#define ASIC3_PHYS      PXA_CS3_PHYS
-#define ASIC3_SD_PHYS   (PXA_CS3_PHYS + 0x02000000)
-
-static unsigned long hx4700_pin_config[] __initdata = {
-
-	/* SDRAM and Static Memory I/O Signals */
-	GPIO20_nSDCS_2,
-	GPIO21_nSDCS_3,
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,   /* W3220 */
-	GPIO79_nCS_3,   /* ASIC3 */
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,	/* EGPIO, WLAN */
-
-	/* PC CARD */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO85_nPCE_1,
-	GPIO104_PSKTSEL,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* FFUART (RS-232) */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD_LPM_LOW,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS_LPM_LOW,
-
-	/* STUART (IRDA) */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* PWM 1 (Backlight) */
-	GPIO17_PWM1_OUT,
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO113_I2S_SYSCLK,
-
-	/* SSP 1 (NavPoint) */
-	GPIO23_SSP1_SCLK_IN,
-	GPIO24_SSP1_SFRM,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* SSP 2 (TSC2046) */
-	GPIO19_SSP2_SCLK,
-	GPIO86_SSP2_RXD,
-	GPIO87_SSP2_TXD,
-	GPIO88_GPIO | MFP_LPM_DRIVE_HIGH,	/* TSC2046_CS */
-
-	/* BQ24022 Regulator */
-	GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT,	/* BQ24022_nCHARGE_EN */
-	GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT,	/* BQ24022_ISET2 */
-
-	/* HX4700 specific input GPIOs */
-	GPIO12_GPIO | WAKEUP_ON_EDGE_RISE,	/* ASIC3_IRQ */
-	GPIO13_GPIO,	/* W3220_IRQ */
-	GPIO14_GPIO,	/* nWLAN_IRQ */
-
-	/* HX4700 specific output GPIOs */
-	GPIO61_GPIO | MFP_LPM_DRIVE_HIGH,	/* W3220_nRESET */
-	GPIO71_GPIO | MFP_LPM_DRIVE_HIGH,	/* ASIC3_nRESET */
-	GPIO81_GPIO | MFP_LPM_DRIVE_HIGH,	/* CPU_GP_nRESET */
-	GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,	/* CPU_HW_nRESET */
-	GPIO102_GPIO | MFP_LPM_DRIVE_LOW,	/* SYNAPTICS_POWER_ON */
-
-	GPIO10_GPIO,	/* GSM_IRQ */
-	GPIO13_GPIO,	/* CPLD_IRQ */
-	GPIO107_GPIO,	/* DS1WM_IRQ */
-	GPIO108_GPIO,	/* GSM_READY */
-	GPIO58_GPIO,	/* TSC2046_nPENIRQ */
-	GPIO66_GPIO,	/* nSDIO_IRQ */
-};
-
-/*
- * IRDA
- */
-
-static struct pxaficp_platform_data ficp_info = {
-	.gpio_pwdown		= GPIO105_HX4700_nIR_ON,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/*
- * GPIO Keys
- */
-
-#define INIT_KEY(_code, _gpio, _active_low, _desc)	\
-	{						\
-		.code       = KEY_##_code,		\
-		.gpio       = _gpio,			\
-		.active_low = _active_low,		\
-		.desc       = _desc,			\
-		.type       = EV_KEY,			\
-		.wakeup     = 1,			\
-	}
-
-static struct gpio_keys_button gpio_keys_buttons[] = {
-	INIT_KEY(POWER,       GPIO0_HX4700_nKEY_POWER,   1, "Power button"),
-	INIT_KEY(MAIL,        GPIO94_HX4700_KEY_MAIL,    0, "Mail button"),
-	INIT_KEY(ADDRESSBOOK, GPIO99_HX4700_KEY_CONTACTS,0, "Contacts button"),
-	INIT_KEY(RECORD,      GPIOD6_nKEY_RECORD,        1, "Record button"),
-	INIT_KEY(CALENDAR,    GPIOD1_nKEY_CALENDAR,      1, "Calendar button"),
-	INIT_KEY(HOMEPAGE,    GPIOD3_nKEY_HOME,          1, "Home button"),
-};
-
-static struct gpio_keys_platform_data gpio_keys_data = {
-	.buttons = gpio_keys_buttons,
-	.nbuttons = ARRAY_SIZE(gpio_keys_buttons),
-};
-
-static struct platform_device gpio_keys = {
-	.name = "gpio-keys",
-	.dev  = {
-		.platform_data = &gpio_keys_data,
-	},
-	.id   = -1,
-};
-
-/*
- * Synaptics NavPoint connected to SSP1
- */
-
-static struct navpoint_platform_data navpoint_platform_data = {
-	.port	= 1,
-	.gpio	= GPIO102_HX4700_SYNAPTICS_POWER_ON,
-};
-
-static struct platform_device navpoint = {
-	.name	= "navpoint",
-	.id	= -1,
-	.dev = {
-		.platform_data = &navpoint_platform_data,
-	},
-};
-
-/*
- * ASIC3
- */
-
-static u16 asic3_gpio_config[] = {
-	/* ASIC3 GPIO banks A and B along with some of C and D
-	   implement the buffering for the CF slot. */
-	ASIC3_CONFIG_GPIO(0, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(1, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(2, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(3, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(4, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(5, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(6, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(7, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(8, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(9, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(10, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(11, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(12, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(13, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(14, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(15, 1, 1, 0),
-
-	ASIC3_CONFIG_GPIO(16, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(17, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(18, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(19, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(20, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(21, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(22, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(23, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(24, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(25, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(26, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(27, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(28, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(29, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(30, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(31, 1, 1, 0),
-
-	/* GPIOC - CF, LEDs, SD */
-	ASIC3_GPIOC0_LED0,		/* red */
-	ASIC3_GPIOC1_LED1,		/* green */
-	ASIC3_GPIOC2_LED2,		/* blue */
-	ASIC3_GPIOC5_nCIOW,
-	ASIC3_GPIOC6_nCIOR,
-	ASIC3_GPIOC7_nPCE_1,
-	ASIC3_GPIOC8_nPCE_2,
-	ASIC3_GPIOC9_nPOE,
-	ASIC3_GPIOC10_nPWE,
-	ASIC3_GPIOC11_PSKTSEL,
-	ASIC3_GPIOC12_nPREG,
-	ASIC3_GPIOC13_nPWAIT,
-	ASIC3_GPIOC14_nPIOIS16,
-	ASIC3_GPIOC15_nPIOR,
-
-	/* GPIOD: input GPIOs, CF */
-	ASIC3_GPIOD4_CF_nCD,
-	ASIC3_GPIOD11_nCIOIS16,
-	ASIC3_GPIOD12_nCWAIT,
-	ASIC3_GPIOD15_nPIOW,
-};
-
-static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = {
-	[0] = {
-		.name = "hx4700:amber",
-		.default_trigger = "ds2760-battery.0-charging-blink-full-solid",
-	},
-	[1] = {
-		.name = "hx4700:green",
-		.default_trigger = "unused",
-	},
-	[2] = {
-		.name = "hx4700:blue",
-		.default_trigger = "hx4700-radio",
-	},
-};
-
-static struct resource asic3_resources[] = {
-	/* GPIO part */
-	[0] = DEFINE_RES_MEM(ASIC3_PHYS, ASIC3_MAP_SIZE_16BIT),
-	[1] = DEFINE_RES_IRQ(PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ)),
-	/* SD part */
-	[2] = DEFINE_RES_MEM(ASIC3_SD_PHYS, ASIC3_MAP_SIZE_16BIT),
-	[3] = DEFINE_RES_IRQ(PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ)),
-};
-
-static struct asic3_platform_data asic3_platform_data = {
-	.gpio_config     = asic3_gpio_config,
-	.gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
-	.irq_base        = IRQ_BOARD_START,
-	.gpio_base       = HX4700_ASIC3_GPIO_BASE,
-	.clock_rate      = 4000000,
-	.leds            = asic3_leds,
-};
-
-static struct platform_device asic3 = {
-	.name          = "asic3",
-	.id            = -1,
-	.resource      = asic3_resources,
-	.num_resources = ARRAY_SIZE(asic3_resources),
-	.dev = {
-		.platform_data = &asic3_platform_data,
-	},
-};
-
-/*
- * EGPIO
- */
-
-static struct resource egpio_resources[] = {
-	[0] = DEFINE_RES_MEM(PXA_CS5_PHYS, 0x4),
-};
-
-static struct htc_egpio_chip egpio_chips[] = {
-	[0] = {
-		.reg_start = 0,
-		.gpio_base = HX4700_EGPIO_BASE,
-		.num_gpios = 8,
-		.direction = HTC_EGPIO_OUTPUT,
-	},
-};
-
-static struct htc_egpio_platform_data egpio_info = {
-	.reg_width = 16,
-	.bus_width = 16,
-	.chip      = egpio_chips,
-	.num_chips = ARRAY_SIZE(egpio_chips),
-};
-
-static struct platform_device egpio = {
-	.name          = "htc-egpio",
-	.id            = -1,
-	.resource      = egpio_resources,
-	.num_resources = ARRAY_SIZE(egpio_resources),
-	.dev = {
-		.platform_data = &egpio_info,
-	},
-};
-
-/*
- * LCD - Sony display connected to ATI Imageon w3220
- */
-
-static void sony_lcd_init(void)
-{
-	gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
-	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
-	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 0);
-	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
-	mdelay(10);
-	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
-	mdelay(20);
-
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1);
-	mdelay(5);
-	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1);
-
-	/* FIXME: init w3220 registers here */
-
-	mdelay(5);
-	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 1);
-	mdelay(10);
-	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 1);
-	mdelay(10);
-	gpio_set_value(GPIO59_HX4700_LCD_PC1, 1);
-	mdelay(10);
-	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 1);
-}
-
-static void sony_lcd_off(void)
-{
-	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
-	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
-	mdelay(10);
-	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 0);
-	mdelay(10);
-	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
-	mdelay(10);
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
-}
-
-#ifdef CONFIG_PM
-static void w3220_lcd_suspend(struct w100fb_par *wfb)
-{
-	sony_lcd_off();
-}
-
-static void w3220_lcd_resume(struct w100fb_par *wfb)
-{
-	sony_lcd_init();
-}
-#else
-#define w3220_lcd_resume	NULL
-#define w3220_lcd_suspend	NULL
-#endif
-
-static struct w100_tg_info w3220_tg_info = {
-	.suspend	= w3220_lcd_suspend,
-	.resume		= w3220_lcd_resume,
-};
-
-/*  				 W3220_VGA		QVGA */
-static struct w100_gen_regs w3220_regs = {
-	.lcd_format =        0x00000003,
-	.lcdd_cntl1 =        0x00000000,
-	.lcdd_cntl2 =        0x0003ffff,
-	.genlcd_cntl1 =      0x00abf003,	/* 0x00fff003 */
-	.genlcd_cntl2 =      0x00000003,
-	.genlcd_cntl3 =      0x000102aa,
-};
-
-static struct w100_mode w3220_modes[] = {
-{
-	.xres 		= 480,
-	.yres 		= 640,
-	.left_margin 	= 15,
-	.right_margin 	= 16,
-	.upper_margin 	= 8,
-	.lower_margin 	= 7,
-	.crtc_ss	= 0x00000000,
-	.crtc_ls	= 0xa1ff01f9,	/* 0x21ff01f9 */
-	.crtc_gs	= 0xc0000000,	/* 0x40000000 */
-	.crtc_vpos_gs	= 0x0000028f,
-	.crtc_ps1_active = 0x00000000,	/* 0x41060010 */
-	.crtc_rev	= 0,
-	.crtc_dclk	= 0x80000000,
-	.crtc_gclk	= 0x040a0104,
-	.crtc_goe	= 0,
-	.pll_freq 	= 95,
-	.pixclk_divider = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 0,
-	.sysclk_src     = CLK_SRC_PLL,
-},
-{
-	.xres 		= 240,
-	.yres 		= 320,
-	.left_margin 	= 9,
-	.right_margin 	= 8,
-	.upper_margin 	= 5,
-	.lower_margin 	= 4,
-	.crtc_ss	= 0x80150014,
-	.crtc_ls        = 0xa0fb00f7,
-	.crtc_gs	= 0xc0080007,
-	.crtc_vpos_gs	= 0x00080007,
-	.crtc_rev	= 0x0000000a,
-	.crtc_dclk	= 0x81700030,
-	.crtc_gclk	= 0x8015010f,
-	.crtc_goe	= 0x00000000,
-	.pll_freq 	= 95,
-	.pixclk_divider = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 0,
-	.sysclk_src     = CLK_SRC_PLL,
-},
-};
-
-struct w100_mem_info w3220_mem_info = {
-	.ext_cntl        = 0x09640011,
-	.sdram_mode_reg  = 0x00600021,
-	.ext_timing_cntl = 0x1a001545,	/* 0x15001545 */
-	.io_cntl         = 0x7ddd7333,
-	.size            = 0x1fffff,
-};
-
-struct w100_bm_mem_info w3220_bm_mem_info = {
-	.ext_mem_bw = 0x50413e01,
-	.offset = 0,
-	.ext_timing_ctl = 0x00043f7f,
-	.ext_cntl = 0x00000010,
-	.mode_reg = 0x00250000,
-	.io_cntl = 0x0fff0000,
-	.config = 0x08301480,
-};
-
-static struct w100_gpio_regs w3220_gpio_info = {
-	.init_data1 = 0xdfe00100,	/* GPIO_DATA */
-	.gpio_dir1  = 0xffff0000,	/* GPIO_CNTL1 */
-	.gpio_oe1   = 0x00000000,	/* GPIO_CNTL2 */
-	.init_data2 = 0x00000000,	/* GPIO_DATA2 */
-	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */
-	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */
-};
-
-static struct w100fb_mach_info w3220_info = {
-	.tg        = &w3220_tg_info,
-	.mem       = &w3220_mem_info,
-	.bm_mem    = &w3220_bm_mem_info,
-	.gpio      = &w3220_gpio_info,
-	.regs      = &w3220_regs,
-	.modelist  = w3220_modes,
-	.num_modes = 2,
-	.xtal_freq = 16000000,
-};
-
-static struct resource w3220_resources[] = {
-	[0] = DEFINE_RES_MEM(ATI_W3220_PHYS, SZ_16M),
-};
-
-static struct platform_device w3220 = {
-	.name	= "w100fb",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &w3220_info,
-	},
-	.num_resources = ARRAY_SIZE(w3220_resources),
-	.resource      = w3220_resources,
-};
-
-static void hx4700_lcd_set_power(struct plat_lcd_data *pd, unsigned int power)
-{
-	if (power)
-		sony_lcd_init();
-	else
-		sony_lcd_off();
-}
-
-static struct plat_lcd_data hx4700_lcd_data = {
-	.set_power = hx4700_lcd_set_power,
-};
-
-static struct platform_device hx4700_lcd = {
-	.name = "platform-lcd",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &hx4700_lcd_data,
-		.parent        = &w3220.dev,
-	},
-};
-
-/*
- * Backlight
- */
-
-static struct platform_pwm_backlight_data backlight_data = {
-	.max_brightness = 200,
-	.dft_brightness = 100,
-};
-
-static struct platform_device backlight = {
-	.name = "pwm-backlight",
-	.id   = -1,
-	.dev  = {
-		.parent        = &pxa27x_device_pwm1.dev,
-		.platform_data = &backlight_data,
-	},
-};
-
-static struct pwm_lookup hx4700_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL,
-		   30923, PWM_POLARITY_NORMAL),
-};
-
-/*
- * USB "Transceiver"
- */
-
-static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		/* This GPIO is on ASIC3 */
-		GPIO_LOOKUP("asic3",
-			    /* Convert to a local offset on the ASIC3 */
-			    GPIOD14_nUSBC_DETECT - HX4700_ASIC3_GPIO_BASE,
-			    "vbus", GPIO_ACTIVE_LOW),
-		/* This one is on the primary SOC GPIO */
-		GPIO_LOOKUP("gpio-pxa", GPIO76_HX4700_USBC_PUEN,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device gpio_vbus = {
-	.name          = "gpio-vbus",
-	.id            = -1,
-};
-
-static struct pxa2xx_udc_mach_info hx4700_udc_info;
-
-/*
- * Touchscreen - TSC2046 connected to SSP2
- */
-
-static const struct ads7846_platform_data tsc2046_info = {
-	.model            = 7846,
-	.vref_delay_usecs = 100,
-	.pressure_max     = 1024,
-	.debounce_max     = 10,
-	.debounce_tol     = 3,
-	.debounce_rep     = 1,
-	.gpio_pendown     = GPIO58_HX4700_TSC2046_nPENIRQ,
-};
-
-static struct pxa2xx_spi_chip tsc2046_chip = {
-	.tx_threshold = 1,
-	.rx_threshold = 2,
-	.timeout      = 64,
-};
-
-static struct spi_board_info tsc2046_board_info[] __initdata = {
-	{
-		.modalias        = "ads7846",
-		.bus_num         = 2,
-		.max_speed_hz    = 2600000, /* 100 kHz sample rate */
-		.irq             = PXA_GPIO_TO_IRQ(GPIO58_HX4700_TSC2046_nPENIRQ),
-		.platform_data   = &tsc2046_info,
-		.controller_data = &tsc2046_chip,
-	},
-};
-
-static struct pxa2xx_spi_controller pxa_ssp2_master_info = {
-	.num_chipselect = 1,
-	.enable_dma     = 1,
-};
-
-static struct gpiod_lookup_table pxa_ssp2_gpio_table = {
-	.dev_id = "spi2",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", GPIO88_HX4700_TSC2046_CS, "cs", 0, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/*
- * External power
- */
-
-static int power_supply_init(struct device *dev)
-{
-	return gpio_request(GPIOD9_nAC_IN, "AC charger detect");
-}
-
-static int hx4700_is_ac_online(void)
-{
-	return !gpio_get_value(GPIOD9_nAC_IN);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIOD9_nAC_IN);
-}
-
-static char *hx4700_supplicants[] = {
-	"ds2760-battery.0", "backup-battery"
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = hx4700_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = hx4700_supplicants,
-	.num_supplicants = ARRAY_SIZE(hx4700_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
-	[0] = DEFINE_RES_NAMED(PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), 1, "ac",
-		IORESOURCE_IRQ |
-		IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE),
-	[1] = DEFINE_RES_NAMED(PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), 1, "usb",
-		IORESOURCE_IRQ |
-		IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-	.resource      = power_supply_resources,
-	.num_resources = ARRAY_SIZE(power_supply_resources),
-};
-
-/*
- * Battery charger
- */
-
-static struct regulator_consumer_supply bq24022_consumers[] = {
-	REGULATOR_SUPPLY("vbus_draw", NULL),
-	REGULATOR_SUPPLY("ac_draw", NULL),
-};
-
-static struct regulator_init_data bq24022_init_data = {
-	.constraints = {
-		.max_uA         = 500000,
-		.valid_ops_mask = REGULATOR_CHANGE_CURRENT|REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
-	.consumer_supplies      = bq24022_consumers,
-};
-
-static enum gpiod_flags bq24022_gpiod_gflags[] = { GPIOD_OUT_LOW };
-
-static struct gpio_regulator_state bq24022_states[] = {
-	{ .value = 100000, .gpios = (0 << 0) },
-	{ .value = 500000, .gpios = (1 << 0) },
-};
-
-static struct gpio_regulator_config bq24022_info = {
-	.supply_name = "bq24022",
-
-	.enabled_at_boot = 0,
-
-	.gflags = bq24022_gpiod_gflags,
-	.ngpios = ARRAY_SIZE(bq24022_gpiod_gflags),
-
-	.states = bq24022_states,
-	.nr_states = ARRAY_SIZE(bq24022_states),
-
-	.type = REGULATOR_CURRENT,
-	.init_data = &bq24022_init_data,
-};
-
-static struct platform_device bq24022 = {
-	.name = "gpio-regulator",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &bq24022_info,
-	},
-};
-
-static struct gpiod_lookup_table bq24022_gpiod_table = {
-	.dev_id = "gpio-regulator",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO96_HX4700_BQ24022_ISET2,
-			    NULL, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO72_HX4700_BQ24022_nCHARGE_EN,
-			    "enable", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/*
- * StrataFlash
- */
-
-static void hx4700_set_vpp(struct platform_device *pdev, int vpp)
-{
-	gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
-}
-
-static struct resource strataflash_resource[] = {
-	[0] = DEFINE_RES_MEM(PXA_CS0_PHYS, SZ_64M),
-	[1] = DEFINE_RES_MEM(PXA_CS0_PHYS + SZ_64M, SZ_64M),
-};
-
-static struct physmap_flash_data strataflash_data = {
-	.width = 4,
-	.set_vpp = hx4700_set_vpp,
-};
-
-static struct platform_device strataflash = {
-	.name          = "physmap-flash",
-	.id            = -1,
-	.resource      = strataflash_resource,
-	.num_resources = ARRAY_SIZE(strataflash_resource),
-	.dev = {
-		.platform_data = &strataflash_data,
-	},
-};
-
-/*
- * Maxim MAX1587A on PI2C
- */
-
-static struct regulator_consumer_supply max1587a_consumer =
-	REGULATOR_SUPPLY("vcc_core", NULL);
-
-static struct regulator_init_data max1587a_v3_info = {
-	.constraints = {
-		.name = "vcc_core range",
-		.min_uV =  900000,
-		.max_uV = 1705000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies = 1,
-	.consumer_supplies     = &max1587a_consumer,
-};
-
-static struct max1586_subdev_data max1587a_subdev = {
-	.name = "vcc_core",
-	.id   = MAX1586_V3,
-	.platform_data = &max1587a_v3_info,
-};
-
-static struct max1586_platform_data max1587a_info = {
-	.num_subdevs = 1,
-	.subdevs     = &max1587a_subdev,
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data = &max1587a_info,
-	},
-};
-
-/*
- * Asahi Kasei AK4641 on I2C
- */
-
-static struct ak4641_platform_data ak4641_info = {
-	.gpio_power = GPIO27_HX4700_CODEC_ON,
-	.gpio_npdn  = GPIO109_HX4700_CODEC_nPDN,
-};
-
-static struct i2c_board_info i2c_board_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("ak4641", 0x12),
-		.platform_data = &ak4641_info,
-	},
-};
-
-static struct gpiod_lookup_table hx4700_audio_gpio_table = {
-	.dev_id = "hx4700-audio",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO75_HX4700_EARPHONE_nDET,
-			    "earphone-det", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO92_HX4700_HP_DRIVER,
-			    "hp-driver", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO107_HX4700_SPK_nSD,
-			    "spk-sd", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct platform_device audio = {
-	.name	= "hx4700-audio",
-	.id	= -1,
-};
-
-
-/*
- * Platform devices
- */
-
-static struct platform_device *devices[] __initdata = {
-	&asic3,
-	&gpio_keys,
-	&navpoint,
-	&backlight,
-	&w3220,
-	&hx4700_lcd,
-	&egpio,
-	&bq24022,
-	&gpio_vbus,
-	&power_supply,
-	&strataflash,
-	&audio,
-};
-
-static struct gpio global_gpios[] = {
-	{ GPIO12_HX4700_ASIC3_IRQ, GPIOF_IN, "ASIC3_IRQ" },
-	{ GPIO13_HX4700_W3220_IRQ, GPIOF_IN, "W3220_IRQ" },
-	{ GPIO14_HX4700_nWLAN_IRQ, GPIOF_IN, "WLAN_IRQ" },
-	{ GPIO59_HX4700_LCD_PC1,          GPIOF_OUT_INIT_HIGH, "LCD_PC1" },
-	{ GPIO62_HX4700_LCD_nRESET,       GPIOF_OUT_INIT_HIGH, "LCD_RESET" },
-	{ GPIO70_HX4700_LCD_SLIN1,        GPIOF_OUT_INIT_HIGH, "LCD_SLIN1" },
-	{ GPIO84_HX4700_LCD_SQN,          GPIOF_OUT_INIT_HIGH, "LCD_SQN" },
-	{ GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" },
-	{ GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" },
-	{ GPIO32_HX4700_RS232_ON,         GPIOF_OUT_INIT_HIGH, "RS232_ON" },
-	{ GPIO61_HX4700_W3220_nRESET,     GPIOF_OUT_INIT_HIGH, "W3220_nRESET" },
-	{ GPIO71_HX4700_ASIC3_nRESET,     GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
-	{ GPIO81_HX4700_CPU_GP_nRESET,    GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" },
-	{ GPIO82_HX4700_EUART_RESET,      GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
-	{ GPIO116_HX4700_CPU_HW_nRESET,   GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" },
-};
-
-static void __init hx4700_init(void)
-{
-	int ret;
-
-	PCFR = PCFR_GPR_EN | PCFR_OPDE;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
-	gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
-	ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
-	if (ret)
-		pr_err ("hx4700: Failed to request GPIOs.\n");
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	gpiod_add_lookup_table(&bq24022_gpiod_table);
-	gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
-	gpiod_add_lookup_table(&hx4700_audio_gpio_table);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
-
-	pxa_set_ficp_info(&ficp_info);
-	pxa27x_set_i2c_power_info(NULL);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
-	i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
-	gpiod_add_lookup_table(&pxa_ssp2_gpio_table);
-	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
-	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
-
-	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
-	mdelay(10);
-	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
-	mdelay(10);
-
-	pxa_set_udc_info(&hx4700_udc_info);
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(H4700, "HP iPAQ HX4700")
-	.atag_offset  = 0x100,
-	.map_io       = pxa27x_map_io,
-	.nr_irqs      = HX4700_NR_IRQS,
-	.init_irq     = pxa27x_init_irq,
-	.handle_irq     = pxa27x_handle_irq,
-	.init_machine = hx4700_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/hx4700.h b/arch/arm/mach-pxa/hx4700.h
deleted file mode 100644
index 0c30e6d9c660..000000000000
--- a/arch/arm/mach-pxa/hx4700.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIO and IRQ definitions for HP iPAQ hx4700
- *
- * Copyright (c) 2008 Philipp Zabel
- */
-
-#ifndef _HX4700_H_
-#define _HX4700_H_
-
-#include <linux/gpio.h>
-#include <linux/mfd/asic3.h>
-#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
-
-#define HX4700_ASIC3_GPIO_BASE	PXA_NR_BUILTIN_GPIO
-#define HX4700_EGPIO_BASE	(HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
-#define HX4700_NR_IRQS		(IRQ_BOARD_START + 70)
-
-/*
- * PXA GPIOs
- */
-
-#define GPIO0_HX4700_nKEY_POWER			0
-#define GPIO12_HX4700_ASIC3_IRQ			12
-#define GPIO13_HX4700_W3220_IRQ			13
-#define GPIO14_HX4700_nWLAN_IRQ			14
-#define GPIO18_HX4700_RDY			18
-#define GPIO22_HX4700_LCD_RL			22
-#define GPIO27_HX4700_CODEC_ON			27
-#define GPIO32_HX4700_RS232_ON			32
-#define GPIO52_HX4700_CPU_nBATT_FAULT		52
-#define GPIO58_HX4700_TSC2046_nPENIRQ		58
-#define GPIO59_HX4700_LCD_PC1			59
-#define GPIO60_HX4700_CF_RNB			60
-#define GPIO61_HX4700_W3220_nRESET		61
-#define GPIO62_HX4700_LCD_nRESET		62
-#define GPIO63_HX4700_CPU_SS_nRESET		63
-#define GPIO65_HX4700_TSC2046_PEN_PU		65
-#define GPIO66_HX4700_ASIC3_nSDIO_IRQ		66
-#define GPIO67_HX4700_EUART_PS			67
-#define GPIO70_HX4700_LCD_SLIN1			70
-#define GPIO71_HX4700_ASIC3_nRESET		71
-#define GPIO72_HX4700_BQ24022_nCHARGE_EN	72
-#define GPIO73_HX4700_LCD_UD_1			73
-#define GPIO75_HX4700_EARPHONE_nDET		75
-#define GPIO76_HX4700_USBC_PUEN			76
-#define GPIO81_HX4700_CPU_GP_nRESET		81
-#define GPIO82_HX4700_EUART_RESET		82
-#define GPIO83_HX4700_WLAN_nRESET		83
-#define GPIO84_HX4700_LCD_SQN			84
-#define GPIO85_HX4700_nPCE1			85
-#define GPIO88_HX4700_TSC2046_CS		88
-#define GPIO91_HX4700_FLASH_VPEN		91
-#define GPIO92_HX4700_HP_DRIVER			92
-#define GPIO93_HX4700_EUART_INT			93
-#define GPIO94_HX4700_KEY_MAIL			94
-#define GPIO95_HX4700_BATT_OFF			95
-#define GPIO96_HX4700_BQ24022_ISET2		96
-#define GPIO97_HX4700_nBL_DETECT		97
-#define GPIO99_HX4700_KEY_CONTACTS		99
-#define GPIO100_HX4700_AUTO_SENSE		100 /* BL auto brightness */
-#define GPIO102_HX4700_SYNAPTICS_POWER_ON	102
-#define GPIO103_HX4700_SYNAPTICS_INT		103
-#define GPIO105_HX4700_nIR_ON			105
-#define GPIO106_HX4700_CPU_BT_nRESET		106
-#define GPIO107_HX4700_SPK_nSD			107
-#define GPIO109_HX4700_CODEC_nPDN		109
-#define GPIO110_HX4700_LCD_LVDD_3V3_ON		110
-#define GPIO111_HX4700_LCD_AVDD_3V3_ON		111
-#define GPIO112_HX4700_LCD_N2V7_7V3_ON		112
-#define GPIO114_HX4700_CF_RESET			114
-#define GPIO116_HX4700_CPU_HW_nRESET		116
-
-/*
- * ASIC3 GPIOs
- */
-
-#define GPIOC_BASE		(HX4700_ASIC3_GPIO_BASE + 32)
-#define GPIOD_BASE		(HX4700_ASIC3_GPIO_BASE + 48)
-
-#define GPIOC0_LED_RED		(GPIOC_BASE + 0)
-#define GPIOC1_LED_GREEN	(GPIOC_BASE + 1)
-#define GPIOC2_LED_BLUE		(GPIOC_BASE + 2)
-#define GPIOC3_nSD_CS		(GPIOC_BASE + 3)
-#define GPIOC4_CF_nCD		(GPIOC_BASE + 4)	/* Input */
-#define GPIOC5_nCIOW		(GPIOC_BASE + 5)	/* Output, to CF */
-#define GPIOC6_nCIOR		(GPIOC_BASE + 6)	/* Output, to CF */
-#define GPIOC7_nPCE1		(GPIOC_BASE + 7)	/* Input, from CPU */
-#define GPIOC8_nPCE2		(GPIOC_BASE + 8)	/* Input, from CPU */
-#define GPIOC9_nPOE		(GPIOC_BASE + 9)	/* Input, from CPU */
-#define GPIOC10_CF_nPWE		(GPIOC_BASE + 10)	/* Input */
-#define GPIOC11_PSKTSEL		(GPIOC_BASE + 11)	/* Input, from CPU */
-#define GPIOC12_nPREG		(GPIOC_BASE + 12)	/* Input, from CPU */
-#define GPIOC13_nPWAIT		(GPIOC_BASE + 13)	/* Output, to CPU */
-#define GPIOC14_nPIOIS16	(GPIOC_BASE + 14)	/* Output, to CPU */
-#define GPIOC15_nPIOR		(GPIOC_BASE + 15)	/* Input, from CPU */
-
-#define GPIOD0_CPU_SS_INT	(GPIOD_BASE + 0)	/* Input */
-#define GPIOD1_nKEY_CALENDAR	(GPIOD_BASE + 1)
-#define GPIOD2_BLUETOOTH_WAKEUP	(GPIOD_BASE + 2)
-#define GPIOD3_nKEY_HOME	(GPIOD_BASE + 3)
-#define GPIOD4_CF_nCD		(GPIOD_BASE + 4)	/* Input, from CF */
-#define GPIOD5_nPIO		(GPIOD_BASE + 5)	/* Input */
-#define GPIOD6_nKEY_RECORD	(GPIOD_BASE + 6)
-#define GPIOD7_nSDIO_DETECT	(GPIOD_BASE + 7)
-#define GPIOD8_COM_DCD		(GPIOD_BASE + 8)	/* Input */
-#define GPIOD9_nAC_IN		(GPIOD_BASE + 9)
-#define GPIOD10_nSDIO_IRQ	(GPIOD_BASE + 10)	/* Input */
-#define GPIOD11_nCIOIS16	(GPIOD_BASE + 11)	/* Input, from CF */
-#define GPIOD12_nCWAIT		(GPIOD_BASE + 12)	/* Input, from CF */
-#define GPIOD13_CF_RNB		(GPIOD_BASE + 13)	/* Input */
-#define GPIOD14_nUSBC_DETECT	(GPIOD_BASE + 14)
-#define GPIOD15_nPIOW		(GPIOD_BASE + 15)	/* Input, from CPU */
-
-/*
- * EGPIOs
- */
-
-#define EGPIO0_VCC_3V3_EN	(HX4700_EGPIO_BASE + 0)	/* WLAN support chip */
-#define EGPIO1_WL_VREG_EN	(HX4700_EGPIO_BASE + 1)	/* WLAN power */
-#define EGPIO2_VCC_2V1_WL_EN	(HX4700_EGPIO_BASE + 2)	/* unused */
-#define EGPIO3_SS_PWR_ON	(HX4700_EGPIO_BASE + 3)	/* smart slot power */
-#define EGPIO4_CF_3V3_ON	(HX4700_EGPIO_BASE + 4)	/* CF 3.3V enable */
-#define EGPIO5_BT_3V3_ON	(HX4700_EGPIO_BASE + 5)	/* BT 3.3V enable */
-#define EGPIO6_WL1V8_EN		(HX4700_EGPIO_BASE + 6)	/* WLAN 1.8V enable */
-#define EGPIO7_VCC_3V3_WL_EN	(HX4700_EGPIO_BASE + 7)	/* WLAN 3.3V enable */
-#define EGPIO8_USB_3V3_ON	(HX4700_EGPIO_BASE + 8)	/* unused */
-
-#endif /* _HX4700_H_ */
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
deleted file mode 100644
index 624088257cfc..000000000000
--- a/arch/arm/mach-pxa/icontrol.c
+++ /dev/null
@@ -1,218 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/icontrol.c
- *
- * Support for the iControl and SafeTcam platforms from TMT Services
- * using the Embedian MXM-8x10 Computer on Module
- *
- * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
- *
- * 2010-01-21 Hennie van der Merve <hvdmerwe@tmtservies.co.za>
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/property.h>
-#include <linux/gpio/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa320.h"
-#include "mxm8x10.h"
-
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/regulator/machine.h>
-
-#include "generic.h"
-
-#define ICONTROL_MCP251x_nCS1	(15)
-#define ICONTROL_MCP251x_nCS2	(16)
-#define ICONTROL_MCP251x_nCS3	(17)
-#define ICONTROL_MCP251x_nCS4	(24)
-
-#define ICONTROL_MCP251x_nIRQ1	(74)
-#define ICONTROL_MCP251x_nIRQ2	(75)
-#define ICONTROL_MCP251x_nIRQ3	(76)
-#define ICONTROL_MCP251x_nIRQ4	(77)
-
-static struct pxa2xx_spi_chip mcp251x_chip_info1 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-};
-
-static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-};
-
-static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-};
-
-static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-};
-
-static const struct property_entry mcp251x_properties[] = {
-	PROPERTY_ENTRY_U32("clock-frequency", 16000000),
-	{}
-};
-
-static const struct software_node mcp251x_node = {
-	.properties = mcp251x_properties,
-};
-
-static struct spi_board_info mcp251x_board_info[] = {
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 3,
-		.chip_select     = 0,
-		.swnode		 = &mcp251x_node,
-		.controller_data = &mcp251x_chip_info1,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1)
-	},
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 3,
-		.chip_select     = 1,
-		.swnode		 = &mcp251x_node,
-		.controller_data = &mcp251x_chip_info2,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2)
-	},
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 4,
-		.chip_select     = 0,
-		.swnode		 = &mcp251x_node,
-		.controller_data = &mcp251x_chip_info3,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3)
-	},
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 4,
-		.chip_select     = 1,
-		.swnode		 = &mcp251x_node,
-		.controller_data = &mcp251x_chip_info4,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4)
-	}
-};
-
-static struct pxa2xx_spi_controller pxa_ssp3_spi_master_info = {
-	.num_chipselect = 2,
-	.enable_dma     = 1
-};
-
-static struct pxa2xx_spi_controller pxa_ssp4_spi_master_info = {
-	.num_chipselect = 2,
-	.enable_dma     = 1
-};
-
-struct platform_device pxa_spi_ssp3 = {
-	.name          = "pxa2xx-spi",
-	.id            = 3,
-	.dev           = {
-		.platform_data = &pxa_ssp3_spi_master_info,
-	}
-};
-
-struct platform_device pxa_spi_ssp4 = {
-	.name          = "pxa2xx-spi",
-	.id            = 4,
-	.dev           = {
-		.platform_data = &pxa_ssp4_spi_master_info,
-	}
-};
-
-static struct gpiod_lookup_table pxa_ssp3_gpio_table = {
-	.dev_id = "spi3",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS1, "cs", 0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS2, "cs", 1, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table pxa_ssp4_gpio_table = {
-	.dev_id = "spi4",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS3, "cs", 0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS4, "cs", 1, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct platform_device *icontrol_spi_devices[] __initdata = {
-	&pxa_spi_ssp3,
-	&pxa_spi_ssp4,
-};
-
-static mfp_cfg_t mfp_can_cfg[] __initdata = {
-	/* CAN CS lines */
-	GPIO15_GPIO,
-	GPIO16_GPIO,
-	GPIO17_GPIO,
-	GPIO24_GPIO,
-
-	/* SPI (SSP3) lines */
-	GPIO89_SSP3_SCLK,
-	GPIO91_SSP3_TXD,
-	GPIO92_SSP3_RXD,
-
-	/* SPI (SSP4) lines */
-	GPIO93_SSP4_SCLK,
-	GPIO95_SSP4_TXD,
-	GPIO96_SSP4_RXD,
-
-	/* CAN nIRQ lines */
-	GPIO74_GPIO | MFP_LPM_EDGE_RISE,
-	GPIO75_GPIO | MFP_LPM_EDGE_RISE,
-	GPIO76_GPIO | MFP_LPM_EDGE_RISE,
-	GPIO77_GPIO | MFP_LPM_EDGE_RISE
-};
-
-static void __init icontrol_can_init(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_can_cfg));
-	gpiod_add_lookup_table(&pxa_ssp3_gpio_table);
-	gpiod_add_lookup_table(&pxa_ssp4_gpio_table);
-	platform_add_devices(ARRAY_AND_SIZE(icontrol_spi_devices));
-	spi_register_board_info(ARRAY_AND_SIZE(mcp251x_board_info));
-}
-
-static void __init icontrol_init(void)
-{
-	mxm_8x10_barebones_init();
-	mxm_8x10_usb_host_init();
-	mxm_8x10_mmc_init();
-
-	icontrol_can_init();
-
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= icontrol_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
deleted file mode 100644
index 525d01ddfbbb..000000000000
--- a/arch/arm/mach-pxa/idp.c
+++ /dev/null
@@ -1,285 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/idp.c
- *
- *  Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
- *
- *  2001-09-13: Cliff Brake <cbrake@accelent.com>
- *              Initial code
- *
- *  2005-02-15: Cliff Brake <cliff.brake@gmail.com>
- *  		<http://www.vibren.com> <http://bec-systems.com>
- *              Updated for 2.6 kernel
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa25x.h"
-#include "idp.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/smc91x.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/* TODO:
- * - add pxa2xx_audio_ops_t device structure
- * - Ethernet interrupt
- */
-
-static unsigned long idp_pin_config[] __initdata = {
-	/* LCD */
-	GPIOxx_LCD_DSTN_16BPP,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* Ethernet */
-	GPIO33_nCS_5,	/* Ethernet CS */
-	GPIO4_GPIO,	/* Ethernet IRQ */
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (IDP_ETH_PHYS + 0x300),
-		.end	= (IDP_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(4),
-		.end	= PXA_GPIO_TO_IRQ(4),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
-		 SMC91X_USE_DMA | SMC91X_NOWAIT,
-	.pxa_u16_align4 = true,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev.platform_data = &smc91x_platdata,
-};
-
-static void idp_backlight_power(int on)
-{
-	if (on) {
-		IDP_CPLD_LCD |= (1<<1);
-	} else {
-		IDP_CPLD_LCD &= ~(1<<1);
-	}
-}
-
-static void idp_vlcd(int on)
-{
-	if (on) {
-		IDP_CPLD_LCD |= (1<<2);
-	} else {
-		IDP_CPLD_LCD &= ~(1<<2);
-	}
-}
-
-static void idp_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	if (on) {
-		IDP_CPLD_LCD |= (1<<0);
-	} else {
-		IDP_CPLD_LCD &= ~(1<<0);
-	}
-
-	/* call idp_vlcd for now as core driver does not support
-	 * both power and vlcd hooks.  Note, this is not technically
-	 * the correct sequence, but seems to work.  Disclaimer:
-	 * this may eventually damage the display.
-	 */
-
-	idp_vlcd(on);
-}
-
-static struct pxafb_mode_info sharp_lm8v31_mode = {
-	.pixclock	= 270000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 16,
-	.hsync_len	= 1,
-	.left_margin	= 3,
-	.right_margin	= 3,
-	.vsync_len	= 1,
-	.upper_margin	= 0,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info sharp_lm8v31 = {
-	.modes          = &sharp_lm8v31_mode,
-	.num_modes      = 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
-			  LCD_AC_BIAS_FREQ(255),
-	.pxafb_backlight_power = &idp_backlight_power,
-	.pxafb_lcd_power = &idp_lcd_power
-};
-
-static struct pxamci_platform_data idp_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-static void __init idp_init(void)
-{
-	printk("idp_init()\n");
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_device_register(&smc91x_device);
-	//platform_device_register(&mst_audio_device);
-	pxa_set_fb_info(NULL, &sharp_lm8v31);
-	pxa_set_mci_info(&idp_mci_platform_data);
-}
-
-static struct map_desc idp_io_desc[] __initdata = {
-  	{
-		.virtual	=  IDP_COREVOLT_VIRT,
-		.pfn		= __phys_to_pfn(IDP_COREVOLT_PHYS),
-		.length		= IDP_COREVOLT_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  IDP_CPLD_VIRT,
-		.pfn		= __phys_to_pfn(IDP_CPLD_PHYS),
-		.length		= IDP_CPLD_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init idp_map_io(void)
-{
-	pxa25x_map_io();
-	iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
-}
-
-/* LEDs */
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-struct idp_led {
-	struct led_classdev     cdev;
-	u8                      mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
-	const char *name;
-	const char *trigger;
-} idp_leds[] = {
-	{ "idp:green", "heartbeat", },
-	{ "idp:red", "cpu0", },
-};
-
-static void idp_led_set(struct led_classdev *cdev,
-		enum led_brightness b)
-{
-	struct idp_led *led = container_of(cdev,
-			struct idp_led, cdev);
-	u32 reg = IDP_CPLD_LED_CONTROL;
-
-	if (b != LED_OFF)
-		reg &= ~led->mask;
-	else
-		reg |= led->mask;
-
-	IDP_CPLD_LED_CONTROL = reg;
-}
-
-static enum led_brightness idp_led_get(struct led_classdev *cdev)
-{
-	struct idp_led *led = container_of(cdev,
-			struct idp_led, cdev);
-
-	return (IDP_CPLD_LED_CONTROL & led->mask) ? LED_OFF : LED_FULL;
-}
-
-static int __init idp_leds_init(void)
-{
-	int i;
-
-	if (!machine_is_pxa_idp())
-		return -ENODEV;
-
-	for (i = 0; i < ARRAY_SIZE(idp_leds); i++) {
-		struct idp_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = idp_leds[i].name;
-		led->cdev.brightness_set = idp_led_set;
-		led->cdev.brightness_get = idp_led_get;
-		led->cdev.default_trigger = idp_leds[i].trigger;
-
-		if (i == 0)
-			led->mask = IDP_HB_LED;
-		else
-			led->mask = IDP_BUSY_LED;
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(idp_leds_init);
-#endif
-
-MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
-	/* Maintainer: Vibren Technologies */
-	.map_io		= idp_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= idp_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.h b/arch/arm/mach-pxa/idp.h
deleted file mode 100644
index 81b9bd9ba754..000000000000
--- a/arch/arm/mach-pxa/idp.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  arch/arm/mach-pxa/include/mach/idp.h
- *
- * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
- *
- * 2001-09-13: Cliff Brake <cbrake@accelent.com>
- *             Initial code
- *
- * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
- *             <http://www.vibren.com> <http://bec-systems.com>
- *             Changes for 2.6 kernel.
- */
-
-
-/*
- * Note: this file must be safe to include in assembly files
- *
- * Support for the Vibren PXA255 IDP requires rev04 or later
- * IDP hardware.
- */
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-#define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
-#define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)
-#define IDP_MEDIAQ_PHYS		(PXA_CS3_PHYS)
-#define IDP_IDE_PHYS		(PXA_CS5_PHYS + 0x03000000)
-#define IDP_ETH_PHYS		(PXA_CS5_PHYS + 0x03400000)
-#define IDP_COREVOLT_PHYS	(PXA_CS5_PHYS + 0x03800000)
-#define IDP_CPLD_PHYS		(PXA_CS5_PHYS + 0x03C00000)
-
-
-/*
- * virtual memory map
- */
-
-#define IDP_COREVOLT_VIRT	(0xf0000000)
-#define IDP_COREVOLT_SIZE	(1*1024*1024)
-
-#define IDP_CPLD_VIRT		(IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
-#define IDP_CPLD_SIZE		(1*1024*1024)
-
-#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
-#error Your custom IO space is getting a bit large !!
-#endif
-
-#define CPLD_P2V(x)		((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
-#define CPLD_V2P(x)		((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __CPLD_REG(x)		(*((volatile unsigned long *)CPLD_P2V(x)))
-#else
-#  define __CPLD_REG(x)		CPLD_P2V(x)
-#endif
-
-/* board level registers in the CPLD: (offsets from CPLD_VIRT) */
-
-#define _IDP_CPLD_REV			(IDP_CPLD_PHYS + 0x00)
-#define _IDP_CPLD_PERIPH_PWR		(IDP_CPLD_PHYS + 0x04)
-#define _IDP_CPLD_LED_CONTROL		(IDP_CPLD_PHYS + 0x08)
-#define _IDP_CPLD_KB_COL_HIGH		(IDP_CPLD_PHYS + 0x0C)
-#define _IDP_CPLD_KB_COL_LOW		(IDP_CPLD_PHYS + 0x10)
-#define _IDP_CPLD_PCCARD_EN		(IDP_CPLD_PHYS + 0x14)
-#define _IDP_CPLD_GPIOH_DIR		(IDP_CPLD_PHYS + 0x18)
-#define _IDP_CPLD_GPIOH_VALUE		(IDP_CPLD_PHYS + 0x1C)
-#define _IDP_CPLD_GPIOL_DIR		(IDP_CPLD_PHYS + 0x20)
-#define _IDP_CPLD_GPIOL_VALUE		(IDP_CPLD_PHYS + 0x24)
-#define _IDP_CPLD_PCCARD_PWR		(IDP_CPLD_PHYS + 0x28)
-#define _IDP_CPLD_MISC_CTRL		(IDP_CPLD_PHYS + 0x2C)
-#define _IDP_CPLD_LCD			(IDP_CPLD_PHYS + 0x30)
-#define _IDP_CPLD_FLASH_WE		(IDP_CPLD_PHYS + 0x34)
-
-#define _IDP_CPLD_KB_ROW		(IDP_CPLD_PHYS + 0x50)
-#define _IDP_CPLD_PCCARD0_STATUS	(IDP_CPLD_PHYS + 0x54)
-#define _IDP_CPLD_PCCARD1_STATUS	(IDP_CPLD_PHYS + 0x58)
-#define _IDP_CPLD_MISC_STATUS		(IDP_CPLD_PHYS + 0x5C)
-
-/* FPGA register virtual addresses */
-
-#define IDP_CPLD_REV			__CPLD_REG(_IDP_CPLD_REV)
-#define IDP_CPLD_PERIPH_PWR		__CPLD_REG(_IDP_CPLD_PERIPH_PWR)
-#define IDP_CPLD_LED_CONTROL		__CPLD_REG(_IDP_CPLD_LED_CONTROL)
-#define IDP_CPLD_KB_COL_HIGH		__CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
-#define IDP_CPLD_KB_COL_LOW		__CPLD_REG(_IDP_CPLD_KB_COL_LOW)
-#define IDP_CPLD_PCCARD_EN		__CPLD_REG(_IDP_CPLD_PCCARD_EN)
-#define IDP_CPLD_GPIOH_DIR		__CPLD_REG(_IDP_CPLD_GPIOH_DIR)
-#define IDP_CPLD_GPIOH_VALUE		__CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
-#define IDP_CPLD_GPIOL_DIR		__CPLD_REG(_IDP_CPLD_GPIOL_DIR)
-#define IDP_CPLD_GPIOL_VALUE		__CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
-#define IDP_CPLD_PCCARD_PWR		__CPLD_REG(_IDP_CPLD_PCCARD_PWR)
-#define IDP_CPLD_MISC_CTRL		__CPLD_REG(_IDP_CPLD_MISC_CTRL)
-#define IDP_CPLD_LCD			__CPLD_REG(_IDP_CPLD_LCD)
-#define IDP_CPLD_FLASH_WE		__CPLD_REG(_IDP_CPLD_FLASH_WE)
-
-#define IDP_CPLD_KB_ROW		        __CPLD_REG(_IDP_CPLD_KB_ROW)
-#define IDP_CPLD_PCCARD0_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
-#define IDP_CPLD_PCCARD1_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
-#define IDP_CPLD_MISC_STATUS		__CPLD_REG(_IDP_CPLD_MISC_STATUS)
-
-
-/*
- * Bit masks for various registers
- */
-
-// IDP_CPLD_PCCARD_PWR
-#define PCC0_PWR0	(1 << 0)
-#define PCC0_PWR1	(1 << 1)
-#define PCC0_PWR2	(1 << 2)
-#define PCC0_PWR3	(1 << 3)
-#define PCC1_PWR0	(1 << 4)
-#define PCC1_PWR1	(1 << 5)
-#define PCC1_PWR2	(1 << 6)
-#define PCC1_PWR3	(1 << 7)
-
-// IDP_CPLD_PCCARD_EN
-#define PCC0_RESET	(1 << 6)
-#define PCC1_RESET	(1 << 7)
-#define PCC0_ENABLE	(1 << 0)
-#define PCC1_ENABLE	(1 << 1)
-
-// IDP_CPLD_PCCARDx_STATUS
-#define _PCC_WRPROT	(1 << 7) // 7-4 read as low true
-#define _PCC_RESET	(1 << 6)
-#define _PCC_IRQ	(1 << 5)
-#define _PCC_INPACK	(1 << 4)
-#define PCC_BVD2	(1 << 3)
-#define PCC_BVD1	(1 << 2)
-#define PCC_VS2		(1 << 1)
-#define PCC_VS1		(1 << 0)
-
-/* A listing of interrupts used by external hardware devices */
-
-#define TOUCH_PANEL_IRQ			PXA_GPIO_TO_IRQ(5)
-#define IDE_IRQ				PXA_GPIO_TO_IRQ(21)
-
-#define TOUCH_PANEL_IRQ_EDGE		IRQ_TYPE_EDGE_FALLING
-
-#define ETHERNET_IRQ			PXA_GPIO_TO_IRQ(4)
-#define ETHERNET_IRQ_EDGE		IRQ_TYPE_EDGE_RISING
-
-#define IDE_IRQ_EDGE			IRQ_TYPE_EDGE_RISING
-
-#define PCMCIA_S0_CD_VALID		PXA_GPIO_TO_IRQ(7)
-#define PCMCIA_S0_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
-
-#define PCMCIA_S1_CD_VALID		PXA_GPIO_TO_IRQ(8)
-#define PCMCIA_S1_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
-
-#define PCMCIA_S0_RDYINT		PXA_GPIO_TO_IRQ(19)
-#define PCMCIA_S1_RDYINT		PXA_GPIO_TO_IRQ(22)
-
-
-/*
- * Macros for LED Driver
- */
-
-/* leds 0 = ON */
-#define IDP_HB_LED	(1<<5)
-#define IDP_BUSY_LED	(1<<6)
-
-#define IDP_LEDS_MASK	(IDP_HB_LED | IDP_BUSY_LED)
-
-/*
- * macros for MTD driver
- */
-
-#define FLASH_WRITE_PROTECT_DISABLE()	((IDP_CPLD_FLASH_WE) &= ~(0x1))
-#define FLASH_WRITE_PROTECT_ENABLE()	((IDP_CPLD_FLASH_WE) |= (0x1))
-
-/*
- * macros for matrix keyboard driver
- */
-
-#define KEYBD_MATRIX_NUMBER_INPUTS	7
-#define KEYBD_MATRIX_NUMBER_OUTPUTS	14
-
-#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC	FALSE
-#define KEYBD_MATRIX_INVERT_INPUT_LOGIC		FALSE
-
-#define KEYBD_MATRIX_SETTLING_TIME_US			100
-#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT		2
-
-#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
-{\
-	IDP_CPLD_KB_COL_LOW = outputs;\
-	IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
-}
-
-#define KEYBD_MATRIX_GET_INPUTS(inputs) \
-{\
-	inputs = (IDP_CPLD_KB_ROW & 0x7f);\
-}
-
-
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 96f33ef1d9ea..5bfce8aa4102 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -147,12 +147,11 @@ pxa_init_irq_common(struct device_node *node, int irq_nr,
 	int n;
 
 	pxa_internal_irq_nr = irq_nr;
-	pxa_irq_domain = irq_domain_add_legacy(node, irq_nr,
-					       PXA_IRQ(0), 0,
-					       &pxa_irq_ops, NULL);
+	pxa_irq_domain = irq_domain_create_legacy(of_fwnode_handle(node), irq_nr, PXA_IRQ(0), 0,
+						  &pxa_irq_ops, NULL);
 	if (!pxa_irq_domain)
 		panic("Unable to add PXA IRQ domain\n");
-	irq_set_default_host(pxa_irq_domain);
+	irq_set_default_domain(pxa_irq_domain);
 
 	for (n = 0; n < irq_nr; n += 32) {
 		void __iomem *base = irq_base(n >> 5);
@@ -257,8 +256,7 @@ void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int))
 	}
 	pxa_irq_base = io_p2v(res.start);
 
-	if (of_find_property(node, "marvell,intc-priority", NULL))
-		cpu_has_ipr = 1;
+	cpu_has_ipr = of_property_read_bool(node, "marvell,intc-priority");
 
 	ret = irq_alloc_descs(-1, 0, pxa_internal_irq_nr, 0);
 	if (ret < 0) {
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
deleted file mode 100644
index 98423a96f440..000000000000
--- a/arch/arm/mach-pxa/littleton.c
+++ /dev/null
@@ -1,462 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/littleton.c
- *
- *  Support for the Marvell Littleton Development Platform.
- *
- *  Author:	Jason Chagas (largely modified code)
- *  Created:	Nov 20, 2006
- *  Copyright:	(C) Copyright 2006 Marvell International Ltd.
- *
- *  2007-11-22  modified to align with latest kernel
- *              eric miao <eric.miao@marvell.com>
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/smc91x.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/mfd/da903x.h>
-#include <linux/platform_data/max732x.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "pxa300.h"
-#include "devices.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "littleton.h"
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-
-#include "generic.h"
-
-/* Littleton MFP configurations */
-static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO70_LCD_LDD_16,
-	GPIO71_LCD_LDD_17,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-
-	/* SSP2 */
-	GPIO25_SSP2_SCLK,
-	GPIO27_SSP2_TXD,
-	GPIO17_GPIO,	/* SFRM as chip-select */
-
-	/* Debug Ethernet */
-	GPIO90_GPIO,
-
-	/* Keypad */
-	GPIO107_KP_DKIN_0,
-	GPIO108_KP_DKIN_1,
-	GPIO115_KP_MKIN_0,
-	GPIO116_KP_MKIN_1,
-	GPIO117_KP_MKIN_2,
-	GPIO118_KP_MKIN_3,
-	GPIO119_KP_MKIN_4,
-	GPIO120_KP_MKIN_5,
-	GPIO121_KP_MKOUT_0,
-	GPIO122_KP_MKOUT_1,
-	GPIO123_KP_MKOUT_2,
-	GPIO124_KP_MKOUT_3,
-	GPIO125_KP_MKOUT_4,
-
-	/* MMC1 */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,
-	GPIO15_GPIO, /* card detect */
-
-	/* UART3 */
-	GPIO107_UART3_CTS,
-	GPIO108_UART3_RTS,
-	GPIO109_UART3_TXD,
-	GPIO110_UART3_RXD,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (LITTLETON_ETH_PHYS + 0x300),
-		.end	= (LITTLETON_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
-		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	}
-};
-
-static struct smc91x_platdata littleton_smc91x_info = {
-	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
-		  SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &littleton_smc91x_info,
-	},
-};
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
-	[0] = {
-		/* VGA */
-		.pixclock	= 38250,
-		.xres		= 480,
-		.yres		= 640,
-		.bpp		= 16,
-		.hsync_len	= 8,
-		.left_margin	= 8,
-		.right_margin	= 24,
-		.vsync_len	= 2,
-		.upper_margin	= 2,
-		.lower_margin	= 4,
-		.sync		= 0,
-	},
-	[1] = {
-		/* QVGA */
-		.pixclock	= 153000,
-		.xres		= 240,
-		.yres		= 320,
-		.bpp		= 16,
-		.hsync_len	= 8,
-		.left_margin	= 8,
-		.right_margin	= 88,
-		.vsync_len	= 2,
-		.upper_margin	= 2,
-		.lower_margin	= 2,
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info littleton_lcd_info = {
-	.modes			= tpo_tdo24mtea1_modes,
-	.num_modes		= 2,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP,
-};
-
-static void __init littleton_init_lcd(void)
-{
-	pxa_set_fb_info(NULL, &littleton_lcd_info);
-}
-#else
-static inline void littleton_init_lcd(void) {};
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
-
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_controller littleton_spi_info = {
-	.num_chipselect		= 1,
-};
-
-static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
-	.rx_threshold	= 1,
-	.tx_threshold	= 1,
-};
-
-static struct spi_board_info littleton_spi_devices[] __initdata = {
-	{
-		.modalias	= "tdo24m",
-		.max_speed_hz	= 1000000,
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.controller_data= &littleton_tdo24m_chip,
-	},
-};
-
-static struct gpiod_lookup_table littleton_spi_gpio_table = {
-	.dev_id = "spi2",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", LITTLETON_GPIO_LCD_CS, "cs", 0, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init littleton_init_spi(void)
-{
-	gpiod_add_lookup_table(&littleton_spi_gpio_table);
-	pxa2xx_set_spi_info(2, &littleton_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
-}
-#else
-static inline void littleton_init_spi(void) {}
-#endif
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int littleton_matrix_key_map[] = {
-	/* KEY(row, col, key_code) */
-	KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
-	KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7),
-	KEY(1, 2, KEY_8), KEY(2, 2, KEY_9),
-
-	KEY(0, 3, KEY_KPASTERISK), 	/* * */
-	KEY(2, 3, KEY_KPDOT), 		/* # */
-
-	KEY(5, 4, KEY_ENTER),
-
-	KEY(5, 0, KEY_UP),
-	KEY(5, 1, KEY_DOWN),
-	KEY(5, 2, KEY_LEFT),
-	KEY(5, 3, KEY_RIGHT),
-	KEY(3, 2, KEY_HOME),
-	KEY(4, 1, KEY_END),
-	KEY(3, 3, KEY_BACK),
-
-	KEY(4, 0, KEY_SEND),
-	KEY(4, 2, KEY_VOLUMEUP),
-	KEY(4, 3, KEY_VOLUMEDOWN),
-
-	KEY(3, 0, KEY_F22),	/* soft1 */
-	KEY(3, 1, KEY_F23),	/* soft2 */
-};
-
-static struct matrix_keymap_data littleton_matrix_keymap_data = {
-	.keymap			= littleton_matrix_key_map,
-	.keymap_size		= ARRAY_SIZE(littleton_matrix_key_map),
-};
-
-static struct pxa27x_keypad_platform_data littleton_keypad_info = {
-	.matrix_key_rows	= 6,
-	.matrix_key_cols	= 5,
-	.matrix_keymap_data	= &littleton_matrix_keymap_data,
-
-	.enable_rotary0		= 1,
-	.rotary0_up_key		= KEY_UP,
-	.rotary0_down_key	= KEY_DOWN,
-
-	.debounce_interval	= 30,
-};
-static void __init littleton_init_keypad(void)
-{
-	pxa_set_keypad_info(&littleton_keypad_info);
-}
-#else
-static inline void littleton_init_keypad(void) {}
-#endif
-
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data littleton_mci_platform_data = {
-	.detect_delay_ms	= 200,
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table littleton_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on MFP (gpio-pxa) GPIO 15 */
-		GPIO_LOOKUP("gpio-pxa", MFP_PIN_GPIO15,
-			    "cd", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init littleton_init_mmc(void)
-{
-	gpiod_add_lookup_table(&littleton_mci_gpio_table);
-	pxa_set_mci_info(&littleton_mci_platform_data);
-}
-#else
-static inline void littleton_init_mmc(void) {}
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-static struct mtd_partition littleton_nand_partitions[] = {
-	[0] = {
-		.name        = "Bootloader",
-		.offset      = 0,
-		.size        = 0x060000,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[1] = {
-		.name        = "Kernel",
-		.offset      = 0x060000,
-		.size        = 0x200000,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[2] = {
-		.name        = "Filesystem",
-		.offset      = 0x0260000,
-		.size        = 0x3000000,     /* 48M - rootfs */
-	},
-	[3] = {
-		.name        = "MassStorage",
-		.offset      = 0x3260000,
-		.size        = 0x3d40000,
-	},
-	[4] = {
-		.name        = "BBT",
-		.offset      = 0x6FA0000,
-		.size        = 0x80000,
-		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
-	},
-	/* NOTE: we reserve some blocks at the end of the NAND flash for
-	 * bad block management, and the max number of relocation blocks
-	 * differs on different platforms. Please take care with it when
-	 * defining the partition table.
-	 */
-};
-
-static struct pxa3xx_nand_platform_data littleton_nand_info = {
-	.parts		= littleton_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(littleton_nand_partitions),
-};
-
-static void __init littleton_init_nand(void)
-{
-	pxa3xx_set_nand_info(&littleton_nand_info);
-}
-#else
-static inline void littleton_init_nand(void) {}
-#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
-
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct led_info littleton_da9034_leds[] = {
-	[0] = {
-		.name	= "littleton:keypad1",
-		.flags	= DA9034_LED_RAMP,
-	},
-	[1] = {
-		.name	= "littleton:keypad2",
-		.flags	= DA9034_LED_RAMP,
-	},
-	[2] = {
-		.name	= "littleton:vibra",
-		.flags	= 0,
-	},
-};
-
-static struct da9034_touch_pdata littleton_da9034_touch = {
-	.x_inverted     = 1,
-	.interval_ms    = 20,
-};
-
-static struct da903x_subdev_info littleton_da9034_subdevs[] = {
-	{
-		.name		= "da903x-led",
-		.id		= DA9034_ID_LED_1,
-		.platform_data	= &littleton_da9034_leds[0],
-	}, {
-		.name		= "da903x-led",
-		.id		= DA9034_ID_LED_2,
-		.platform_data	= &littleton_da9034_leds[1],
-	}, {
-		.name		= "da903x-led",
-		.id		= DA9034_ID_VIBRA,
-		.platform_data	= &littleton_da9034_leds[2],
-	}, {
-		.name		= "da903x-backlight",
-		.id		= DA9034_ID_WLED,
-	}, {
-		.name		= "da9034-touch",
-		.id		= DA9034_ID_TOUCH,
-		.platform_data	= &littleton_da9034_touch,
-	},
-};
-
-static struct da903x_platform_data littleton_da9034_info = {
-	.num_subdevs	= ARRAY_SIZE(littleton_da9034_subdevs),
-	.subdevs	= littleton_da9034_subdevs,
-};
-
-static struct max732x_platform_data littleton_max7320_info = {
-	.gpio_base	= EXT0_GPIO_BASE,
-};
-
-static struct i2c_board_info littleton_i2c_info[] = {
-	[0] = {
-		.type		= "da9034",
-		.addr		= 0x34,
-		.platform_data	= &littleton_da9034_info,
-		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO18)),
-	},
-	[1] = {
-		.type		= "max7320",
-		.addr		= 0x50,
-		.platform_data	= &littleton_max7320_info,
-	},
-};
-
-static void __init littleton_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(littleton_i2c_info));
-}
-#else
-static inline void littleton_init_i2c(void) {}
-#endif /* CONFIG_I2C_PXA || CONFIG_I2C_PXA_MODULE */
-
-static void __init littleton_init(void)
-{
-	/* initialize MFP configurations */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	/*
-	 * Note: we depend bootloader set the correct
-	 * value to MSC register for SMC91x.
-	 */
-	platform_device_register(&smc91x_device);
-
-	littleton_init_spi();
-	littleton_init_i2c();
-	littleton_init_mmc();
-	littleton_init_lcd();
-	littleton_init_keypad();
-	littleton_init_nand();
-}
-
-MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= LITTLETON_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= littleton_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/littleton.h b/arch/arm/mach-pxa/littleton.h
deleted file mode 100644
index a0a8d2bf9d71..000000000000
--- a/arch/arm/mach-pxa/littleton.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_LITTLETON_H
-#define __ASM_ARCH_LITTLETON_H
-
-#define LITTLETON_ETH_PHYS	0x30000000
-
-#define LITTLETON_GPIO_LCD_CS	(17)
-
-#define EXT0_GPIO_BASE	(PXA_NR_BUILTIN_GPIO)
-#define EXT0_GPIO(x)	(EXT0_GPIO_BASE + (x))
-
-#define LITTLETON_NR_IRQS	(IRQ_BOARD_START + 8)
-
-#endif /* __ASM_ARCH_LITTLETON_H */
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
deleted file mode 100644
index 0e4123c5fd42..000000000000
--- a/arch/arm/mach-pxa/lpd270.c
+++ /dev/null
@@ -1,518 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/lpd270.c
- *
- * Support for the LogicPD PXA270 Card Engine.
- * Derived from the mainstone code, which carries these notices:
- *
- * Author:	Nicolas Pitre
- * Created:	Nov 05, 2002
- * Copyright:	MontaVista Software Inc.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/ioport.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/smc91x.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include "pxa27x.h"
-#include "lpd270.h"
-#include "addr-map.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include "smemc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long lpd270_pin_config[] __initdata = {
-	/* Chip Selects */
-	GPIO15_nCS_1,	/* Mainboard Flash */
-	GPIO78_nCS_2,	/* CPLD + Ethernet */
-
-	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
-	GPIO16_PWM0_OUT,	/* Backlight */
-
-	/* USB Host */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO45_AC97_SYSCLK,
-
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-};
-
-static unsigned int lpd270_irq_enabled;
-
-static void lpd270_mask_irq(struct irq_data *d)
-{
-	int lpd270_irq = d->irq - LPD270_IRQ(0);
-
-	__raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
-
-	lpd270_irq_enabled &= ~(1 << lpd270_irq);
-	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
-}
-
-static void lpd270_unmask_irq(struct irq_data *d)
-{
-	int lpd270_irq = d->irq - LPD270_IRQ(0);
-
-	lpd270_irq_enabled |= 1 << lpd270_irq;
-	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
-}
-
-static struct irq_chip lpd270_irq_chip = {
-	.name		= "CPLD",
-	.irq_ack	= lpd270_mask_irq,
-	.irq_mask	= lpd270_mask_irq,
-	.irq_unmask	= lpd270_unmask_irq,
-};
-
-static void lpd270_irq_handler(struct irq_desc *desc)
-{
-	unsigned int irq;
-	unsigned long pending;
-
-	pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
-	do {
-		/* clear useless edge notification */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = LPD270_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-
-			pending = __raw_readw(LPD270_INT_STATUS) &
-						lpd270_irq_enabled;
-		}
-	} while (pending);
-}
-
-static void __init lpd270_init_irq(void)
-{
-	int irq;
-
-	pxa27x_init_irq();
-
-	__raw_writew(0, LPD270_INT_MASK);
-	__raw_writew(0, LPD270_INT_STATUS);
-
-	/* setup extra LogicPD PXA270 irqs */
-	for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
-		irq_set_chip_and_handler(irq, &lpd270_irq_chip,
-					 handle_level_irq);
-		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
-	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler);
-	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-
-#ifdef CONFIG_PM
-static void lpd270_irq_resume(void)
-{
-	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
-}
-
-static struct syscore_ops lpd270_irq_syscore_ops = {
-	.resume = lpd270_irq_resume,
-};
-
-static int __init lpd270_irq_device_init(void)
-{
-	if (machine_is_logicpd_pxa270()) {
-		register_syscore_ops(&lpd270_irq_syscore_ops);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-device_initcall(lpd270_irq_device_init);
-#endif
-
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= LPD270_ETH_PHYS,
-		.end	= (LPD270_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LPD270_ETHERNET_IRQ,
-		.end	= LPD270_ETHERNET_IRQ,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev.platform_data = &smc91x_platdata,
-};
-
-static struct resource lpd270_flash_resources[] = {
-	[0] = {
-		.start	= PXA_CS0_PHYS,
-		.end	= PXA_CS0_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_CS1_PHYS,
-		.end	= PXA_CS1_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition lpd270_flash0_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	}, {
-		.name =		"Kernel",
-		.size =		0x00400000,
-		.offset =	0x00040000,
-	}, {
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00440000
-	},
-};
-
-static struct flash_platform_data lpd270_flash_data[2] = {
-	{
-		.name		= "processor-flash",
-		.map_name	= "cfi_probe",
-		.parts		= lpd270_flash0_partitions,
-		.nr_parts	= ARRAY_SIZE(lpd270_flash0_partitions),
-	}, {
-		.name		= "mainboard-flash",
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	}
-};
-
-static struct platform_device lpd270_flash_device[2] = {
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 0,
-		.dev = {
-			.platform_data	= &lpd270_flash_data[0],
-		},
-		.resource	= &lpd270_flash_resources[0],
-		.num_resources	= 1,
-	}, {
-		.name		= "pxa2xx-flash",
-		.id		= 1,
-		.dev = {
-			.platform_data	= &lpd270_flash_data[1],
-		},
-		.resource	= &lpd270_flash_resources[1],
-		.num_resources	= 1,
-	},
-};
-
-static struct pwm_lookup lpd270_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data lpd270_backlight_data = {
-	.max_brightness	= 1,
-	.dft_brightness	= 1,
-};
-
-static struct platform_device lpd270_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent	= &pxa27x_device_pwm0.dev,
-		.platform_data = &lpd270_backlight_data,
-	},
-};
-
-/* 5.7" TFT QVGA (LoLo display number 1) */
-static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
-	.pixclock		= 150000,
-	.xres			= 320,
-	.yres			= 240,
-	.bpp			= 16,
-	.hsync_len		= 0x14,
-	.left_margin		= 0x28,
-	.right_margin		= 0x0a,
-	.vsync_len		= 0x02,
-	.upper_margin		= 0x08,
-	.lower_margin		= 0x14,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq057q3dc02 = {
-	.modes			= &sharp_lq057q3dc02_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 12.1" TFT SVGA (LoLo display number 2) */
-static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
-	.pixclock		= 50000,
-	.xres			= 800,
-	.yres			= 600,
-	.bpp			= 16,
-	.hsync_len		= 0x05,
-	.left_margin		= 0x52,
-	.right_margin		= 0x05,
-	.vsync_len		= 0x04,
-	.upper_margin		= 0x14,
-	.lower_margin		= 0x0a,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq121s1dg31 = {
-	.modes			= &sharp_lq121s1dg31_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 3.6" TFT QVGA (LoLo display number 3) */
-static struct pxafb_mode_info sharp_lq036q1da01_mode = {
-	.pixclock		= 150000,
-	.xres			= 320,
-	.yres			= 240,
-	.bpp			= 16,
-	.hsync_len		= 0x0e,
-	.left_margin		= 0x04,
-	.right_margin		= 0x0a,
-	.vsync_len		= 0x03,
-	.upper_margin		= 0x03,
-	.lower_margin		= 0x03,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq036q1da01 = {
-	.modes			= &sharp_lq036q1da01_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 6.4" TFT VGA (LoLo display number 5) */
-static struct pxafb_mode_info sharp_lq64d343_mode = {
-	.pixclock		= 25000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 0x31,
-	.left_margin		= 0x89,
-	.right_margin		= 0x19,
-	.vsync_len		= 0x12,
-	.upper_margin		= 0x22,
-	.lower_margin		= 0x00,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq64d343 = {
-	.modes			= &sharp_lq64d343_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 10.4" TFT VGA (LoLo display number 7) */
-static struct pxafb_mode_info sharp_lq10d368_mode = {
-	.pixclock		= 25000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 0x31,
-	.left_margin		= 0x89,
-	.right_margin		= 0x19,
-	.vsync_len		= 0x12,
-	.upper_margin		= 0x22,
-	.lower_margin		= 0x00,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq10d368 = {
-	.modes			= &sharp_lq10d368_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 3.5" TFT QVGA (LoLo display number 8) */
-static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
-	.pixclock		= 150000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 0x0e,
-	.left_margin		= 0x0a,
-	.right_margin		= 0x0a,
-	.vsync_len		= 0x03,
-	.upper_margin		= 0x05,
-	.lower_margin		= 0x14,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq035q7db02_20 = {
-	.modes			= &sharp_lq035q7db02_20_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-static struct pxafb_mach_info *lpd270_lcd_to_use;
-
-static int __init lpd270_set_lcd(char *str)
-{
-	if (!strncasecmp(str, "lq057q3dc02", 11)) {
-		lpd270_lcd_to_use = &sharp_lq057q3dc02;
-	} else if (!strncasecmp(str, "lq121s1dg31", 11)) {
-		lpd270_lcd_to_use = &sharp_lq121s1dg31;
-	} else if (!strncasecmp(str, "lq036q1da01", 11)) {
-		lpd270_lcd_to_use = &sharp_lq036q1da01;
-	} else if (!strncasecmp(str, "lq64d343", 8)) {
-		lpd270_lcd_to_use = &sharp_lq64d343;
-	} else if (!strncasecmp(str, "lq10d368", 8)) {
-		lpd270_lcd_to_use = &sharp_lq10d368;
-	} else if (!strncasecmp(str, "lq035q7db02-20", 14)) {
-		lpd270_lcd_to_use = &sharp_lq035q7db02_20;
-	} else {
-		printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
-	}
-
-	return 1;
-}
-
-__setup("lcd=", lpd270_set_lcd);
-
-static struct platform_device *platform_devices[] __initdata = {
-	&smc91x_device,
-	&lpd270_backlight_device,
-	&lpd270_flash_device[0],
-	&lpd270_flash_device[1],
-};
-
-static struct pxaohci_platform_data lpd270_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init lpd270_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
-	lpd270_flash_data[1].width = 4;
-
-	/*
-	 * System bus arbiter setting:
-	 * - Core_Park
-	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
-	 */
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	pwm_add_table(lpd270_pwm_lookup, ARRAY_SIZE(lpd270_pwm_lookup));
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-	pxa_set_ac97_info(NULL);
-
-	if (lpd270_lcd_to_use != NULL)
-		pxa_set_fb_info(NULL, lpd270_lcd_to_use);
-
-	pxa_set_ohci_info(&lpd270_ohci_platform_data);
-}
-
-
-static struct map_desc lpd270_io_desc[] __initdata = {
-	{
-		.virtual	= (unsigned long)LPD270_CPLD_VIRT,
-		.pfn		= __phys_to_pfn(LPD270_CPLD_PHYS),
-		.length		= LPD270_CPLD_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init lpd270_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
-
-	/* for use I SRAM as framebuffer.  */
-	PSLR |= 0x00000F04;
-	PCFR  = 0x00000066;
-}
-
-MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
-	/* Maintainer: Peter Barada */
-	.atag_offset	= 0x100,
-	.map_io		= lpd270_map_io,
-	.nr_irqs	= LPD270_NR_IRQS,
-	.init_irq	= lpd270_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= lpd270_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/lpd270.h b/arch/arm/mach-pxa/lpd270.h
deleted file mode 100644
index 4b096fb9d61f..000000000000
--- a/arch/arm/mach-pxa/lpd270.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-pxa/include/mach/lpd270.h
- *
- * Author:	Lennert Buytenhek
- * Created:	Feb 10, 2006
- */
-
-#ifndef __ASM_ARCH_LPD270_H
-#define __ASM_ARCH_LPD270_H
-
-#define LPD270_CPLD_PHYS	PXA_CS2_PHYS
-#define LPD270_CPLD_VIRT	IOMEM(0xf0000000)
-#define LPD270_CPLD_SIZE	0x00100000
-
-#define LPD270_ETH_PHYS		(PXA_CS2_PHYS + 0x01000000)
-
-/* CPLD registers  */
-#define LPD270_CPLD_REG(x)	(LPD270_CPLD_VIRT + (x))
-#define LPD270_CONTROL		LPD270_CPLD_REG(0x00)
-#define LPD270_PERIPHERAL0	LPD270_CPLD_REG(0x04)
-#define LPD270_PERIPHERAL1	LPD270_CPLD_REG(0x08)
-#define LPD270_CPLD_REVISION	LPD270_CPLD_REG(0x14)
-#define LPD270_EEPROM_SPI_ITF	LPD270_CPLD_REG(0x20)
-#define LPD270_MODE_PINS	LPD270_CPLD_REG(0x24)
-#define LPD270_EGPIO		LPD270_CPLD_REG(0x30)
-#define LPD270_INT_MASK		LPD270_CPLD_REG(0x40)
-#define LPD270_INT_STATUS	LPD270_CPLD_REG(0x50)
-
-#define LPD270_INT_AC97		(1 << 4)  /* AC'97 CODEC IRQ */
-#define LPD270_INT_ETHERNET	(1 << 3)  /* Ethernet controller IRQ */
-#define LPD270_INT_USBC		(1 << 2)  /* USB client cable detection IRQ */
-
-#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LPD270_USBC_IRQ		LPD270_IRQ(2)
-#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
-#define LPD270_AC97_IRQ		LPD270_IRQ(4)
-#define LPD270_NR_IRQS		(IRQ_BOARD_START + 5)
-
-#endif
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
deleted file mode 100644
index 4f0944f3b262..000000000000
--- a/arch/arm/mach-pxa/lubbock.c
+++ /dev/null
@@ -1,649 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/lubbock.c
- *
- *  Support for the Intel DBPXA250 Development Platform.
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- */
-#include <linux/clkdev.h>
-#include <linux/gpio.h>
-#include <linux/gpio/gpio-reg.h>
-#include <linux/gpio/machine.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/major.h>
-#include <linux/fb.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/smc91x.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/pxa2xx_spi.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <asm/hardware/sa1111.h>
-
-#include "pxa25x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "lubbock.h"
-#include "udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include "pm.h"
-#include "smemc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long lubbock_pin_config[] __initdata = {
-	GPIO15_nCS_1,	/* CS1 - Flash */
-	GPIO78_nCS_2,	/* CS2 - Baseboard FGPA */
-	GPIO79_nCS_3,	/* CS3 - SMC ethernet */
-	GPIO80_nCS_4,	/* CS4 - SA1111 */
-
-	/* SSP data pins */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* LCD - 16bpp DSTN */
-	GPIOxx_LCD_DSTN_16BPP,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* SA1111 chip */
-	GPIO11_3_6MHz,
-
-	/* wakeup */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-#define LUB_HEXLED		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
-
-void lubbock_set_hexled(uint32_t value)
-{
-	LUB_HEXLED = value;
-}
-
-static struct gpio_chip *lubbock_misc_wr_gc;
-
-static void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
-{
-	unsigned long m = mask, v = set;
-	lubbock_misc_wr_gc->set_multiple(lubbock_misc_wr_gc, &m, &v);
-}
-
-static int lubbock_udc_is_connected(void)
-{
-	return (LUB_MISC_RD & (1 << 9)) == 0;
-}
-
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	.udc_is_connected	= lubbock_udc_is_connected,
-	// no D+ pullup; lubbock can't connect/disconnect in software
-};
-
-static struct resource lubbock_udc_resources[] = {
-	DEFINE_RES_MEM(0x40600000, 0x10000),
-	DEFINE_RES_IRQ(IRQ_USB),
-	DEFINE_RES_IRQ(LUBBOCK_USB_IRQ),
-	DEFINE_RES_IRQ(LUBBOCK_USB_DISC_IRQ),
-};
-
-/* GPIOs for SA1111 PCMCIA */
-static struct gpiod_lookup_table sa1111_pcmcia_gpio_table = {
-	.dev_id = "1800",
-	.table = {
-		{ "sa1111", 0, "a0vpp", GPIO_ACTIVE_HIGH },
-		{ "sa1111", 1, "a1vpp", GPIO_ACTIVE_HIGH },
-		{ "sa1111", 2, "a0vcc", GPIO_ACTIVE_HIGH },
-		{ "sa1111", 3, "a1vcc", GPIO_ACTIVE_HIGH },
-		{ "lubbock", 14, "b0vcc", GPIO_ACTIVE_HIGH },
-		{ "lubbock", 15, "b1vcc", GPIO_ACTIVE_HIGH },
-		{ },
-	},
-};
-
-static void lubbock_init_pcmcia(void)
-{
-	struct clk *clk;
-
-	gpiod_add_lookup_table(&sa1111_pcmcia_gpio_table);
-
-	/* Add an alias for the SA1111 PCMCIA clock */
-	clk = clk_get_sys("pxa2xx-pcmcia", NULL);
-	if (!IS_ERR(clk)) {
-		clkdev_create(clk, NULL, "1800");
-		clk_put(clk);
-	}
-}
-
-static struct resource sa1111_resources[] = {
-	[0] = {
-		.start	= 0x10000000,
-		.end	= 0x10001fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LUBBOCK_SA1111_IRQ,
-		.end	= LUBBOCK_SA1111_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sa1111_platform_data sa1111_info = {
-	.irq_base	= LUBBOCK_SA1111_IRQ_BASE,
-	.disable_devs	= SA1111_DEVID_SAC,
-};
-
-static struct platform_device sa1111_device = {
-	.name		= "sa1111",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sa1111_resources),
-	.resource	= sa1111_resources,
-	.dev		= {
-		.platform_data	= &sa1111_info,
-	},
-};
-
-/* ADS7846 is connected through SSP ... and if your board has J5 populated,
- * you can select it to replace the ucb1400 by switching the touchscreen cable
- * (to J5) and poking board registers (as done below).  Else it's only useful
- * for the temperature sensors.
- */
-static struct pxa2xx_spi_controller pxa_ssp_master_info = {
-	.num_chipselect	= 1,
-};
-
-static int lubbock_ads7846_pendown_state(void)
-{
-	/* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
-	return 0;
-}
-
-static struct ads7846_platform_data ads_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,		/* internal, no cap */
-	.get_pendown_state	= lubbock_ads7846_pendown_state,
-	// .x_plate_ohms		= 500,	/* GUESS! */
-	// .y_plate_ohms		= 500,	/* GUESS! */
-};
-
-static struct gpiod_lookup_table ads7846_cs_gpios = {
-	.dev_id		= "ads7846",
-	.table		= {
-		GPIO_LOOKUP("lubbock", 11, "cs", GPIO_ACTIVE_LOW),
-		{}
-	},
-};
-
-static struct pxa2xx_spi_chip ads_hw = {
-	.tx_threshold		= 1,
-	.rx_threshold		= 2,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = { {
-	.modalias	= "ads7846",
-	.platform_data	= &ads_info,
-	.controller_data = &ads_hw,
-	.irq		= LUBBOCK_BB_IRQ,
-	.max_speed_hz	= 120000 /* max sample rate at 3V */
-				* 26 /* command + data + overhead */,
-	.bus_num	= 1,
-	.chip_select	= 0,
-},
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start	= 0x0c000c00,
-		.end	= 0x0c0fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LUBBOCK_ETH_IRQ,
-		.end	= LUBBOCK_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-	[2] = {
-		.name	= "smc91x-attrib",
-		.start	= 0x0e000000,
-		.end	= 0x0e0fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct smc91x_platdata lubbock_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &lubbock_smc91x_info,
-	},
-};
-
-static struct resource flash_resources[] = {
-	[0] = {
-		.start	= 0x00000000,
-		.end	= SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x04000000,
-		.end	= 0x04000000 + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition lubbock_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	},{
-		.name =		"Kernel",
-		.size =		0x00100000,
-		.offset =	0x00040000,
-	},{
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00140000
-	}
-};
-
-static struct flash_platform_data lubbock_flash_data[2] = {
-	{
-		.map_name	= "cfi_probe",
-		.parts		= lubbock_partitions,
-		.nr_parts	= ARRAY_SIZE(lubbock_partitions),
-	}, {
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	}
-};
-
-static struct platform_device lubbock_flash_device[2] = {
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 0,
-		.dev = {
-			.platform_data = &lubbock_flash_data[0],
-		},
-		.resource = &flash_resources[0],
-		.num_resources = 1,
-	},
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 1,
-		.dev = {
-			.platform_data = &lubbock_flash_data[1],
-		},
-		.resource = &flash_resources[1],
-		.num_resources = 1,
-	},
-};
-
-static struct resource lubbock_cplds_resources[] = {
-	[0] = {
-		.start	= LUBBOCK_FPGA_PHYS + 0xc0,
-		.end	= LUBBOCK_FPGA_PHYS + 0xe0 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(0),
-		.end	= PXA_GPIO_TO_IRQ(0),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-	[2] = {
-		.start	= LUBBOCK_IRQ(0),
-		.end	= LUBBOCK_IRQ(6),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lubbock_cplds_device = {
-	.name		= "pxa_cplds_irqs",
-	.id		= -1,
-	.resource	= &lubbock_cplds_resources[0],
-	.num_resources	= 3,
-};
-
-
-static struct platform_device *devices[] __initdata = {
-	&sa1111_device,
-	&smc91x_device,
-	&lubbock_flash_device[0],
-	&lubbock_flash_device[1],
-	&lubbock_cplds_device,
-};
-
-static struct pxafb_mode_info sharp_lm8v31_mode = {
-	.pixclock	= 270000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 16,
-	.hsync_len	= 1,
-	.left_margin	= 3,
-	.right_margin	= 3,
-	.vsync_len	= 1,
-	.upper_margin	= 0,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info sharp_lm8v31 = {
-	.modes		= &sharp_lm8v31_mode,
-	.num_modes	= 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
-			  LCD_AC_BIAS_FREQ(255),
-};
-
-#define	MMC_POLL_RATE		msecs_to_jiffies(1000)
-
-static irq_handler_t mmc_detect_int;
-static void *mmc_detect_int_data;
-static struct timer_list mmc_timer;
-
-static void lubbock_mmc_poll(struct timer_list *unused)
-{
-	unsigned long flags;
-
-	/* clear any previous irq state, then ... */
-	local_irq_save(flags);
-	LUB_IRQ_SET_CLR &= ~(1 << 0);
-	local_irq_restore(flags);
-
-	/* poll until mmc/sd card is removed */
-	if (LUB_IRQ_SET_CLR & (1 << 0))
-		mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
-	else {
-		(void) mmc_detect_int(LUBBOCK_SD_IRQ, mmc_detect_int_data);
-		enable_irq(LUBBOCK_SD_IRQ);
-	}
-}
-
-static irqreturn_t lubbock_detect_int(int irq, void *data)
-{
-	/* IRQ is level triggered; disable, and poll for removal */
-	disable_irq(irq);
-	mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
-
-	return mmc_detect_int(irq, data);
-}
-
-static int lubbock_mci_init(struct device *dev,
-		irq_handler_t detect_int,
-		void *data)
-{
-	/* detect card insert/eject */
-	mmc_detect_int = detect_int;
-	mmc_detect_int_data = data;
-	timer_setup(&mmc_timer, lubbock_mmc_poll, 0);
-	return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
-			   0, "lubbock-sd-detect", data);
-}
-
-static int lubbock_mci_get_ro(struct device *dev)
-{
-	return (LUB_MISC_RD & (1 << 2)) != 0;
-}
-
-static void lubbock_mci_exit(struct device *dev, void *data)
-{
-	free_irq(LUBBOCK_SD_IRQ, data);
-	del_timer_sync(&mmc_timer);
-}
-
-static struct pxamci_platform_data lubbock_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay_ms	= 10,
-	.init 			= lubbock_mci_init,
-	.get_ro			= lubbock_mci_get_ro,
-	.exit 			= lubbock_mci_exit,
-};
-
-static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (mode & IR_SIRMODE) {
-		lubbock_set_misc_wr(BIT(4), 0);
-	} else if (mode & IR_FIRMODE) {
-		lubbock_set_misc_wr(BIT(4), BIT(4));
-	}
-	pxa2xx_transceiver_mode(dev, mode);
-	local_irq_restore(flags);
-}
-
-static struct pxaficp_platform_data lubbock_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE,
-	.transceiver_mode	= lubbock_irda_transceiver_mode,
-};
-
-static void __init lubbock_init(void)
-{
-	int flashboot = (LUB_CONF_SWITCHES & 1);
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
-
-	lubbock_misc_wr_gc = gpio_reg_init(NULL, (void *)&LUB_MISC_WR,
-					   -1, 16, "lubbock", 0, LUB_MISC_WR,
-					   NULL, NULL, NULL);
-	if (IS_ERR(lubbock_misc_wr_gc)) {
-		pr_err("Lubbock: unable to register lubbock GPIOs: %ld\n",
-		       PTR_ERR(lubbock_misc_wr_gc));
-		lubbock_misc_wr_gc = NULL;
-	}
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	lubbock_init_pcmcia();
-
-	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
-	/* lubbock has two extra IRQs */
-	pxa25x_device_udc.resource = lubbock_udc_resources;
-	pxa25x_device_udc.num_resources = ARRAY_SIZE(lubbock_udc_resources);
-	pxa_set_udc_info(&udc_info);
-	pxa_set_fb_info(NULL, &sharp_lm8v31);
-	pxa_set_mci_info(&lubbock_mci_platform_data);
-	pxa_set_ficp_info(&lubbock_ficp_platform_data);
-	pxa_set_ac97_info(NULL);
-
-	lubbock_flash_data[0].width = lubbock_flash_data[1].width =
-		(__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
-	/* Compensate for the nROMBT switch which swaps the flash banks */
-	printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
-	       flashboot?"Flash":"ROM", flashboot);
-
-	lubbock_flash_data[flashboot^1].name = "application-flash";
-	lubbock_flash_data[flashboot].name = "boot-rom";
-	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	gpiod_add_lookup_table(&ads7846_cs_gpios);
-
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-
-static struct map_desc lubbock_io_desc[] __initdata = {
-  	{	/* CPLD */
-		.virtual	=  LUBBOCK_FPGA_VIRT,
-		.pfn		= __phys_to_pfn(LUBBOCK_FPGA_PHYS),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init lubbock_map_io(void)
-{
-	pxa25x_map_io();
-	iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
-
-	PCFR |= PCFR_OPDE;
-}
-
-/*
- * Driver for the 8 discrete LEDs available for general use:
- * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
- * so be sure to not monkey with them here.
- */
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-struct lubbock_led {
-	struct led_classdev	cdev;
-	u8			mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
-	const char *name;
-	const char *trigger;
-} lubbock_leds[] = {
-	{ "lubbock:D28", "default-on", },
-	{ "lubbock:D27", "cpu0", },
-	{ "lubbock:D26", "heartbeat" },
-	{ "lubbock:D25", },
-	{ "lubbock:D24", },
-	{ "lubbock:D23", },
-	{ "lubbock:D22", },
-	{ "lubbock:D21", },
-};
-
-static void lubbock_led_set(struct led_classdev *cdev,
-			      enum led_brightness b)
-{
-	struct lubbock_led *led = container_of(cdev,
-					 struct lubbock_led, cdev);
-	u32 reg = LUB_DISC_BLNK_LED;
-
-	if (b != LED_OFF)
-		reg |= led->mask;
-	else
-		reg &= ~led->mask;
-
-	LUB_DISC_BLNK_LED = reg;
-}
-
-static enum led_brightness lubbock_led_get(struct led_classdev *cdev)
-{
-	struct lubbock_led *led = container_of(cdev,
-					 struct lubbock_led, cdev);
-	u32 reg = LUB_DISC_BLNK_LED;
-
-	return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static int __init lubbock_leds_init(void)
-{
-	int i;
-
-	if (!machine_is_lubbock())
-		return -ENODEV;
-
-	/* All ON */
-	LUB_DISC_BLNK_LED |= 0xff;
-	for (i = 0; i < ARRAY_SIZE(lubbock_leds); i++) {
-		struct lubbock_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = lubbock_leds[i].name;
-		led->cdev.brightness_set = lubbock_led_set;
-		led->cdev.brightness_get = lubbock_led_get;
-		led->cdev.default_trigger = lubbock_leds[i].trigger;
-		led->mask = BIT(i);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(lubbock_leds_init);
-#endif
-
-MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
-	/* Maintainer: MontaVista Software Inc. */
-	.map_io		= lubbock_map_io,
-	.nr_irqs	= LUBBOCK_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= lubbock_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/lubbock.h b/arch/arm/mach-pxa/lubbock.h
deleted file mode 100644
index 55cf91e22ae2..000000000000
--- a/arch/arm/mach-pxa/lubbock.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- */
-
-#include "irqs.h"
-
-#define LUBBOCK_ETH_PHYS	PXA_CS3_PHYS
-
-#define LUBBOCK_FPGA_PHYS	PXA_CS2_PHYS
-#define LUBBOCK_FPGA_VIRT	(0xf0000000)
-#define LUB_P2V(x)		((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT)
-#define LUB_V2P(x)		((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __LUB_REG(x)		(*((volatile unsigned long *)LUB_P2V(x)))
-#else
-#  define __LUB_REG(x)		LUB_P2V(x)
-#endif
-
-/* FPGA register virtual addresses */
-#define LUB_WHOAMI		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
-#define LUB_DISC_BLNK_LED	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
-#define LUB_CONF_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
-#define LUB_USER_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
-#define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
-#define LUB_MISC_RD		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x090)
-#define LUB_IRQ_MASK_EN		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0)
-#define LUB_IRQ_SET_CLR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
-#define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
-
-/* Board specific IRQs */
-#define LUBBOCK_NR_IRQS		IRQ_BOARD_START
-
-#define LUBBOCK_IRQ(x)		(LUBBOCK_NR_IRQS + (x))
-#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
-#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
-#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
-#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
-#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
-#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
-#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
-#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
-
-#define LUBBOCK_SA1111_IRQ_BASE	(LUBBOCK_NR_IRQS + 32)
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
deleted file mode 100644
index 0827ebca1d38..000000000000
--- a/arch/arm/mach-pxa/magician.c
+++ /dev/null
@@ -1,1112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Support for HTC Magician PDA phones:
- * i-mate JAM, O2 Xda mini, Orange SPV M500, Qtek s100, Qtek s110
- * and T-Mobile MDA Compact.
- *
- * Copyright (c) 2006-2007 Philipp Zabel
- *
- * Based on hx4700.c, spitz.c and others.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/mfd/htc-pasic3.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pda_power.h>
-#include <linux/platform_data/gpio-htc-egpio.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/gpio-regulator.h>
-#include <linux/regulator/machine.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/system_info.h>
-
-#include "pxa27x.h"
-#include "addr-map.h"
-#include "magician.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-
-#include <linux/regulator/max1586.h>
-
-#include <linux/platform_data/pxa2xx_udc.h>
-
-#include "udc.h"
-#include "pxa27x-udc.h"
-#include "devices.h"
-#include "generic.h"
-
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/spi/ads7846.h>
-#include <sound/uda1380.h>
-
-static unsigned long magician_pin_config[] __initdata = {
-
-	/* SDRAM and Static Memory I/O Signals */
-	GPIO20_nSDCS_2,
-	GPIO21_nSDCS_3,
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,	/* PASIC3 */
-	GPIO79_nCS_3,	/* EGPIO CPLD */
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,
-
-	/* I2C UDA1380 + OV9640 */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* PWM 0 - LCD backlight */
-	GPIO16_PWM0_OUT,
-
-	/* I2S UDA1380 capture */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO31_I2S_SYNC,
-	GPIO113_I2S_SYSCLK,
-
-	/* SSP 1 UDA1380 playback */
-	GPIO23_SSP1_SCLK,
-	GPIO24_SSP1_SFRM,
-	GPIO25_SSP1_TXD,
-
-	/* SSP 2 TSC2046 touchscreen */
-	GPIO19_SSP2_SCLK,
-	MFP_CFG_OUT(GPIO14, AF0, DRIVE_HIGH),	/* frame as GPIO */
-	GPIO89_SSP2_TXD,
-	GPIO88_SSP2_RXD,
-
-	/* MMC/SD/SDHC slot */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* QCI camera interface */
-	GPIO12_CIF_DD_7,
-	GPIO17_CIF_DD_6,
-	GPIO50_CIF_DD_3,
-	GPIO51_CIF_DD_2,
-	GPIO52_CIF_DD_4,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO55_CIF_DD_1,
-	GPIO81_CIF_DD_0,
-	GPIO82_CIF_DD_5,
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-
-	/* Magician specific input GPIOs */
-	GPIO9_GPIO,	/* unknown */
-	GPIO10_GPIO,	/* GSM_IRQ */
-	GPIO13_GPIO,	/* CPLD_IRQ */
-	GPIO107_GPIO,	/* DS1WM_IRQ */
-	GPIO108_GPIO,	/* GSM_READY */
-	GPIO115_GPIO,	/* nPEN_IRQ */
-};
-
-/*
- * IrDA
- */
-
-static struct pxaficp_platform_data magician_ficp_info = {
-	.gpio_pwdown		= GPIO83_MAGICIAN_nIR_EN,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.gpio_pwdown_inverted	= 0,
-};
-
-/*
- * GPIO Keys
- */
-
-#define INIT_KEY(_code, _gpio, _desc)	\
-	{				\
-		.code	= KEY_##_code,	\
-		.gpio	= _gpio,	\
-		.desc	= _desc,	\
-		.type	= EV_KEY,	\
-		.wakeup	= 1,		\
-	}
-
-static struct gpio_keys_button magician_button_table[] = {
-	INIT_KEY(POWER,      GPIO0_MAGICIAN_KEY_POWER,      "Power button"),
-	INIT_KEY(ESC,        GPIO37_MAGICIAN_KEY_HANGUP,    "Hangup button"),
-	INIT_KEY(F10,        GPIO38_MAGICIAN_KEY_CONTACTS,  "Contacts button"),
-	INIT_KEY(CALENDAR,   GPIO90_MAGICIAN_KEY_CALENDAR,  "Calendar button"),
-	INIT_KEY(CAMERA,     GPIO91_MAGICIAN_KEY_CAMERA,    "Camera button"),
-	INIT_KEY(UP,         GPIO93_MAGICIAN_KEY_UP,        "Up button"),
-	INIT_KEY(DOWN,       GPIO94_MAGICIAN_KEY_DOWN,      "Down button"),
-	INIT_KEY(LEFT,       GPIO95_MAGICIAN_KEY_LEFT,      "Left button"),
-	INIT_KEY(RIGHT,      GPIO96_MAGICIAN_KEY_RIGHT,     "Right button"),
-	INIT_KEY(KPENTER,    GPIO97_MAGICIAN_KEY_ENTER,     "Action button"),
-	INIT_KEY(RECORD,     GPIO98_MAGICIAN_KEY_RECORD,    "Record button"),
-	INIT_KEY(VOLUMEUP,   GPIO100_MAGICIAN_KEY_VOL_UP,   "Volume up"),
-	INIT_KEY(VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, "Volume down"),
-	INIT_KEY(PHONE,      GPIO102_MAGICIAN_KEY_PHONE,    "Phone button"),
-	INIT_KEY(PLAY,       GPIO99_MAGICIAN_HEADPHONE_IN,  "Headset button"),
-};
-
-static struct gpio_keys_platform_data gpio_keys_data = {
-	.buttons	= magician_button_table,
-	.nbuttons	= ARRAY_SIZE(magician_button_table),
-};
-
-static struct platform_device gpio_keys = {
-	.name	= "gpio-keys",
-	.dev	= {
-		.platform_data = &gpio_keys_data,
-	},
-	.id	= -1,
-};
-
-/*
- * EGPIO (Xilinx CPLD)
- *
- * 32-bit aligned 8-bit registers
- * 16 possible registers (reg windows size), only 7 used:
- * 3x output, 1x irq, 3x input
- */
-
-static struct resource egpio_resources[] = {
-	[0] = {
-		.start	= PXA_CS3_PHYS,
-		.end	= PXA_CS3_PHYS + 0x20 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct htc_egpio_chip egpio_chips[] = {
-	[0] = {
-		.reg_start	= 0,
-		.gpio_base	= MAGICIAN_EGPIO(0, 0),
-		.num_gpios	= 24,
-		.direction	= HTC_EGPIO_OUTPUT,
-		/*
-		 * Depends on modules configuration
-		 */
-		.initial_values	= 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
-	},
-	[1] = {
-		.reg_start	= 4,
-		.gpio_base	= MAGICIAN_EGPIO(4, 0),
-		.num_gpios	= 24,
-		.direction	= HTC_EGPIO_INPUT,
-	},
-};
-
-static struct htc_egpio_platform_data egpio_info = {
-	.reg_width	= 8,
-	.bus_width	= 32,
-	.irq_base	= IRQ_BOARD_START,
-	.num_irqs	= 4,
-	.ack_register	= 3,
-	.chip		= egpio_chips,
-	.num_chips	= ARRAY_SIZE(egpio_chips),
-};
-
-static struct platform_device egpio = {
-	.name		= "htc-egpio",
-	.id		= -1,
-	.resource	= egpio_resources,
-	.num_resources	= ARRAY_SIZE(egpio_resources),
-	.dev = {
-		.platform_data = &egpio_info,
-	},
-};
-
-/*
- * PXAFB LCD - Toppoly TD028STEB1 or Samsung LTP280QV
- */
-
-static struct pxafb_mode_info toppoly_modes[] = {
-	{
-		.pixclock	= 96153,
-		.bpp		= 16,
-		.xres		= 240,
-		.yres		= 320,
-		.hsync_len	= 11,
-		.vsync_len	= 3,
-		.left_margin	= 19,
-		.upper_margin	= 2,
-		.right_margin	= 10,
-		.lower_margin	= 2,
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mode_info samsung_modes[] = {
-	{
-		.pixclock	= 226469,
-		.bpp		= 16,
-		.xres		= 240,
-		.yres		= 320,
-		.hsync_len	= 8,
-		.vsync_len	= 4,
-		.left_margin	= 9,
-		.upper_margin	= 4,
-		.right_margin	= 9,
-		.lower_margin	= 4,
-		.sync	= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	},
-};
-
-static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	pr_debug("Toppoly LCD power: %s\n", on ? "on" : "off");
-
-	if (on) {
-		gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
-		udelay(2000);
-		gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
-		udelay(2000);
-		/* FIXME: enable LCDC here */
-		udelay(2000);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
-		udelay(2000);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
-	} else {
-		msleep(15);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
-		udelay(500);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
-		udelay(1000);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
-		gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
-	}
-}
-
-static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	pr_debug("Samsung LCD power: %s\n", on ? "on" : "off");
-
-	if (on) {
-		if (system_rev < 3)
-			gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1);
-		else
-			gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
-		mdelay(6);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
-		mdelay(6);	/* Avdd -> Voff >5ms */
-		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
-		mdelay(16);	/* Voff -> Von >(5+10)ms */
-		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
-	} else {
-		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
-		mdelay(16);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
-		mdelay(6);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
-		mdelay(6);
-		if (system_rev < 3)
-			gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0);
-		else
-			gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
-	}
-}
-
-static struct pxafb_mach_info toppoly_info = {
-	.modes			= toppoly_modes,
-	.num_modes		= 1,
-	.fixed_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP,
-	.pxafb_lcd_power	= toppoly_lcd_power,
-};
-
-static struct pxafb_mach_info samsung_info = {
-	.modes			= samsung_modes,
-	.num_modes		= 1,
-	.fixed_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-		LCD_ALTERNATE_MAPPING,
-	.pxafb_lcd_power	= samsung_lcd_power,
-};
-
-/*
- * Backlight
- */
-
-static struct pwm_lookup magician_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 30923,
-		   PWM_POLARITY_NORMAL),
-};
-
- /*
- * fixed regulator for pwm_backlight
- */
-
-static struct regulator_consumer_supply pwm_backlight_supply[] = {
-	REGULATOR_SUPPLY("power", "pwm_backlight"),
-};
-
-
-static struct gpio magician_bl_gpios[] = {
-	{ EGPIO_MAGICIAN_BL_POWER,	GPIOF_DIR_OUT, "Backlight power" },
-	{ EGPIO_MAGICIAN_BL_POWER2,	GPIOF_DIR_OUT, "Backlight power 2" },
-};
-
-static int magician_backlight_init(struct device *dev)
-{
-	return gpio_request_array(ARRAY_AND_SIZE(magician_bl_gpios));
-}
-
-static int magician_backlight_notify(struct device *dev, int brightness)
-{
-	pr_debug("Brightness = %i\n", brightness);
-	gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
-	if (brightness >= 200) {
-		gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
-		return brightness - 72;
-	} else {
-		gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 0);
-		return brightness;
-	}
-}
-
-static void magician_backlight_exit(struct device *dev)
-{
-	gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios));
-}
-
-/*
- * LCD PWM backlight (main)
- *
- * MP1521 frequency should be:
- *	100-400 Hz = 2 .5*10^6 - 10 *10^6 ns
- */
-
-static struct platform_pwm_backlight_data backlight_data = {
-	.max_brightness	= 272,
-	.dft_brightness	= 100,
-	.init		= magician_backlight_init,
-	.notify		= magician_backlight_notify,
-	.exit		= magician_backlight_exit,
-};
-
-static struct platform_device backlight = {
-	.name	= "pwm-backlight",
-	.id	= -1,
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &backlight_data,
-	},
-};
-
-/*
- * GPIO LEDs, Phone keys backlight, vibra
- */
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name = "magician::vibra",
-		.default_trigger = "none",
-		.gpio = GPIO22_MAGICIAN_VIBRA_EN,
-	},
-	{
-		.name = "magician::phone_bl",
-		.default_trigger = "backlight",
-		.gpio = GPIO103_MAGICIAN_LED_KP,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds = gpio_leds,
-	.num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &gpio_led_info,
-	},
-};
-
-/*
- * PASIC3 with DS1WM
- */
-
-static struct resource pasic3_resources[] = {
-	[0] = {
-		.start	= PXA_CS2_PHYS,
-		.end	= PXA_CS2_PHYS + 0x1b,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct pasic3_platform_data pasic3_platform_data = {
-	.clock_rate = 4000000,
-};
-
-static struct platform_device pasic3 = {
-	.name		= "pasic3",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pasic3_resources),
-	.resource	= pasic3_resources,
-	.dev = {
-		.platform_data = &pasic3_platform_data,
-	},
-};
-
-/*
- * PXA UDC
- */
-
-static void magician_udc_command(int cmd)
-{
-	if (cmd == PXA2XX_UDC_CMD_CONNECT)
-		UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
-	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
-		UP2OCR &= ~(UP2OCR_DPPUE | UP2OCR_DPPUBE);
-}
-
-static struct pxa2xx_udc_mach_info magician_udc_info __initdata = {
-	.udc_command	= magician_udc_command,
-	.gpio_pullup	= GPIO27_MAGICIAN_USBC_PUEN,
-};
-
-/*
- * USB device VBus detection
- */
-
-static struct resource gpio_vbus_resource = {
-	.flags	= IORESOURCE_IRQ,
-	.start	= IRQ_MAGICIAN_VBUS,
-	.end	= IRQ_MAGICIAN_VBUS,
-};
-
-static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		/*
-		 * EGPIO on register 4 index 1, the second EGPIO chip
-		 * starts at register 4 so this will be at index 1 on that
-		 * chip.
-		 */
-		GPIO_LOOKUP("htc-egpio-1", 1,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO27_MAGICIAN_USBC_PUEN,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device gpio_vbus = {
-	.name		= "gpio-vbus",
-	.id		= -1,
-	.num_resources	= 1,
-	.resource	= &gpio_vbus_resource,
-};
-
-/*
- * External power
- */
-
-static int magician_supply_init(struct device *dev)
-{
-	int ret = -1;
-
-	ret = gpio_request(EGPIO_MAGICIAN_CABLE_TYPE, "Cable is AC charger");
-	if (ret) {
-		pr_err("Cannot request AC/USB charger GPIO (%i)\n", ret);
-		goto err_ac;
-	}
-
-	ret = gpio_request(EGPIO_MAGICIAN_CABLE_INSERTED, "Cable inserted");
-	if (ret) {
-		pr_err("Cannot request cable detection GPIO (%i)\n", ret);
-		goto err_usb;
-	}
-
-	return 0;
-
-err_usb:
-	gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
-err_ac:
-	return ret;
-}
-
-static void magician_set_charge(int flags)
-{
-	if (flags & PDA_POWER_CHARGE_AC) {
-		pr_debug("Charging from AC\n");
-		gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
-	} else if (flags & PDA_POWER_CHARGE_USB) {
-		pr_debug("Charging from USB\n");
-		gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
-	} else {
-		pr_debug("Charging disabled\n");
-		gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 0);
-	}
-}
-
-static int magician_is_ac_online(void)
-{
-	return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
-		gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE); /* AC=1 */
-}
-
-static int magician_is_usb_online(void)
-{
-	return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
-		(!gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE)); /* USB=0 */
-}
-
-static void magician_supply_exit(struct device *dev)
-{
-	gpio_free(EGPIO_MAGICIAN_CABLE_INSERTED);
-	gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
-}
-
-static char *magician_supplicants[] = {
-	"ds2760-battery.0", "backup-battery"
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init			= magician_supply_init,
-	.exit			= magician_supply_exit,
-	.is_ac_online		= magician_is_ac_online,
-	.is_usb_online		= magician_is_usb_online,
-	.set_charge		= magician_set_charge,
-	.supplied_to		= magician_supplicants,
-	.num_supplicants	= ARRAY_SIZE(magician_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
-	[0] = {
-		.name	= "ac",
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-			IORESOURCE_IRQ_LOWEDGE,
-		.start	= IRQ_MAGICIAN_VBUS,
-		.end	= IRQ_MAGICIAN_VBUS,
-	},
-	[1] = {
-		.name	= "usb",
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-			IORESOURCE_IRQ_LOWEDGE,
-		.start	= IRQ_MAGICIAN_VBUS,
-		.end	= IRQ_MAGICIAN_VBUS,
-	},
-};
-
-static struct platform_device power_supply = {
-	.name	= "pda-power",
-	.id	= -1,
-	.dev = {
-		.platform_data = &power_supply_info,
-	},
-	.resource	= power_supply_resources,
-	.num_resources	= ARRAY_SIZE(power_supply_resources),
-};
-
-/*
- * Battery charger
- */
-
-static struct regulator_consumer_supply bq24022_consumers[] = {
-	REGULATOR_SUPPLY("vbus_draw", NULL),
-	REGULATOR_SUPPLY("ac_draw", NULL),
-};
-
-static struct regulator_init_data bq24022_init_data = {
-	.constraints = {
-		.max_uA		= 500000,
-		.valid_ops_mask	= REGULATOR_CHANGE_CURRENT |
-			REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(bq24022_consumers),
-	.consumer_supplies	= bq24022_consumers,
-};
-
-
-static enum gpiod_flags bq24022_gpiod_gflags[] = { GPIOD_OUT_LOW };
-
-static struct gpio_regulator_state bq24022_states[] = {
-	{ .value = 100000, .gpios = (0 << 0) },
-	{ .value = 500000, .gpios = (1 << 0) },
-};
-
-static struct gpio_regulator_config bq24022_info = {
-	.supply_name		= "bq24022",
-
-	.enabled_at_boot	= 1,
-
-	.gflags = bq24022_gpiod_gflags,
-	.ngpios = ARRAY_SIZE(bq24022_gpiod_gflags),
-
-	.states			= bq24022_states,
-	.nr_states		= ARRAY_SIZE(bq24022_states),
-
-	.type			= REGULATOR_CURRENT,
-	.init_data		= &bq24022_init_data,
-};
-
-static struct platform_device bq24022 = {
-	.name	= "gpio-regulator",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &bq24022_info,
-	},
-};
-
-static struct gpiod_lookup_table bq24022_gpiod_table = {
-	.dev_id = "gpio-regulator",
-	.table = {
-		GPIO_LOOKUP("htc-egpio-0", EGPIO_MAGICIAN_BQ24022_ISET2 - MAGICIAN_EGPIO_BASE,
-			    NULL, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
-			    "enable", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/*
- * fixed regulator for ads7846
- */
-
-static struct regulator_consumer_supply ads7846_supply =
-	REGULATOR_SUPPLY("vcc", "spi2.0");
-
-static struct regulator_init_data vads7846_regulator = {
-	.constraints	= {
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &ads7846_supply,
-};
-
-static struct fixed_voltage_config vads7846 = {
-	.supply_name	= "vads7846",
-	.microvolts	= 3300000, /* probably */
-	.startup_delay	= 0,
-	.init_data	= &vads7846_regulator,
-};
-
-static struct platform_device vads7846_device = {
-	.name	= "reg-fixed-voltage",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &vads7846,
-	},
-};
-
-/*
- * Vcore regulator MAX1587A
- */
-
-static struct regulator_consumer_supply magician_max1587a_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data magician_max1587a_v3_info = {
-	.constraints = {
-		.name		= "vcc_core range",
-		.min_uV		= 700000,
-		.max_uV		= 1475000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.consumer_supplies	= magician_max1587a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(magician_max1587a_consumers),
-};
-
-static struct max1586_subdev_data magician_max1587a_subdevs[] = {
-	{
-		.name		= "vcc_core",
-		.id		= MAX1586_V3,
-		.platform_data	= &magician_max1587a_v3_info,
-	}
-};
-
-static struct max1586_platform_data magician_max1587a_info = {
-	.subdevs     = magician_max1587a_subdevs,
-	.num_subdevs = ARRAY_SIZE(magician_max1587a_subdevs),
-	/*
-	 * NOTICE measured directly on the PCB (board_id == 0x3a), but
-	 * if R24 is present, it will boost the voltage
-	 * (write 1.475V, get 1.645V and smoke)
-	 */
-	.v3_gain     = MAX1586_GAIN_NO_R24,
-};
-
-static struct i2c_board_info magician_pwr_i2c_board_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data	= &magician_max1587a_info,
-	},
-};
-
-/*
- * MMC/SD
- */
-
-static int magician_mci_init(struct device *dev,
-	irq_handler_t detect_irq, void *data)
-{
-	return request_irq(IRQ_MAGICIAN_SD, detect_irq, 0,
-		"mmc card detect", data);
-}
-
-static void magician_mci_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_MAGICIAN_SD, data);
-}
-
-static struct pxamci_platform_data magician_mci_info = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init			= magician_mci_init,
-	.exit			= magician_mci_exit,
-	.gpio_card_ro_invert	= 1,
-};
-
-/*
- * Write protect on EGPIO register 5 index 4, this is on the second HTC
- * EGPIO chip which starts at register 4, so we need offset 8+4=12 on that
- * particular chip.
- */
-#define EGPIO_MAGICIAN_nSD_READONLY_OFFSET 12
-/*
- * Power on EGPIO register 2 index 0, so this is on the first HTC EGPIO chip
- * starting at register 0 so we need offset 2*8+0 = 16 on that chip.
- */
-#define EGPIO_MAGICIAN_nSD_POWER_OFFSET 16
-
-static struct gpiod_lookup_table magician_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("htc-egpio-1", EGPIO_MAGICIAN_nSD_READONLY_OFFSET,
-			    "wp", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("htc-egpio-0", EGPIO_MAGICIAN_nSD_POWER_OFFSET,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/*
- * USB OHCI
- */
-
-static struct pxaohci_platform_data magician_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	/* port1: CSR Bluetooth, port2: OTG with UDC */
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
-	.power_budget	= 0,
-	.power_on_delay = 100,
-};
-
-/*
- * StrataFlash
- */
-
-static int magician_flash_init(struct platform_device *pdev)
-{
-	int ret = gpio_request(EGPIO_MAGICIAN_FLASH_VPP, "flash Vpp enable");
-
-	if (ret) {
-		pr_err("Cannot request flash enable GPIO (%i)\n", ret);
-		return ret;
-	}
-
-	ret = gpio_direction_output(EGPIO_MAGICIAN_FLASH_VPP, 1);
-	if (ret) {
-		pr_err("Cannot set direction for flash enable (%i)\n", ret);
-		gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
-	}
-
-	return ret;
-}
-
-static void magician_set_vpp(struct platform_device *pdev, int vpp)
-{
-	gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
-}
-
-static void magician_flash_exit(struct platform_device *pdev)
-{
-	gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
-}
-
-static struct resource strataflash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct mtd_partition magician_flash_parts[] = {
-	{
-		.name		= "Bootloader",
-		.offset		= 0x0,
-		.size		= 0x40000,
-		.mask_flags	= MTD_WRITEABLE, /* EXPERIMENTAL */
-	},
-	{
-		.name		= "Linux Kernel",
-		.offset		= 0x40000,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-/*
- * physmap-flash driver
- */
-
-static struct physmap_flash_data strataflash_data = {
-	.width		= 4,
-	.init		= magician_flash_init,
-	.set_vpp	= magician_set_vpp,
-	.exit		= magician_flash_exit,
-	.parts		= magician_flash_parts,
-	.nr_parts	= ARRAY_SIZE(magician_flash_parts),
-};
-
-static struct platform_device strataflash = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= &strataflash_resource,
-	.num_resources	= 1,
-	.dev = {
-		.platform_data = &strataflash_data,
-	},
-};
-
-/*
- * audio support
- */
-static struct uda1380_platform_data uda1380_info = {
-	.gpio_power = EGPIO_MAGICIAN_CODEC_POWER,
-	.gpio_reset = EGPIO_MAGICIAN_CODEC_RESET,
-	.dac_clk    = UDA1380_DAC_CLK_WSPLL,
-};
-
-static struct i2c_board_info magician_audio_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("uda1380", 0x18),
-		.platform_data = &uda1380_info,
-	},
-};
-
-static struct gpiod_lookup_table magician_audio_gpio_table = {
-	.dev_id = "magician-audio",
-	.table = {
-		GPIO_LOOKUP("htc-egpio-0",
-			    EGPIO_MAGICIAN_SPK_POWER - MAGICIAN_EGPIO_BASE,
-			    "SPK_POWER", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("htc-egpio-0",
-			    EGPIO_MAGICIAN_EP_POWER - MAGICIAN_EGPIO_BASE,
-			    "EP_POWER", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("htc-egpio-0",
-			    EGPIO_MAGICIAN_MIC_POWER - MAGICIAN_EGPIO_BASE,
-			    "MIC_POWER", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("htc-egpio-0",
-			    EGPIO_MAGICIAN_IN_SEL0 - MAGICIAN_EGPIO_BASE,
-			    "IN_SEL0", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("htc-egpio-0",
-			    EGPIO_MAGICIAN_IN_SEL1 - MAGICIAN_EGPIO_BASE,
-			    "IN_SEL1", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void magician_audio_init(void)
-{
-	i2c_register_board_info(0,
-		ARRAY_AND_SIZE(magician_audio_i2c_board_info));
-
-	gpiod_add_lookup_table(&magician_audio_gpio_table);
-	platform_device_register_simple("magician-audio", -1, NULL, 0);
-}
-
-/*
- * PXA I2C main controller
- */
-
-static struct i2c_pxa_platform_data i2c_info = {
-	/* OV9640 I2C device doesn't support fast mode */
-	.fast_mode	= 0,
-};
-
-/*
- * PXA I2C power controller
- */
-
-static struct i2c_pxa_platform_data magician_i2c_power_info = {
-	.fast_mode	= 1,
-};
-
-/*
- * Touchscreen
- */
-
-static struct ads7846_platform_data ads7846_pdata = {
-	.model		= 7846,
-	.x_plate_ohms	= 317,
-	.y_plate_ohms	= 500,
-	.pressure_max	= 1023,	/* with x plate ohms it will overflow 255 */
-	.debounce_max	= 3,	/* first readout is always bad */
-	.debounce_tol	= 30,
-	.debounce_rep	= 0,
-	.gpio_pendown	= GPIO115_MAGICIAN_nPEN_IRQ,
-	.keep_vref_on	= 1,
-	.wakeup		= true,
-	.vref_delay_usecs		= 100,
-	.penirq_recheck_delay_usecs	= 100,
-};
-
-struct pxa2xx_spi_chip tsc2046_chip_info = {
-	.tx_threshold	= 1,
-	.rx_threshold	= 2,
-	.timeout	= 64,
-};
-
-static struct pxa2xx_spi_controller magician_spi_info = {
-	.num_chipselect	= 1,
-	.enable_dma	= 1,
-};
-
-static struct gpiod_lookup_table magician_spi_gpio_table = {
-	.dev_id = "spi2",
-	.table = {
-		/* NOTICE must be GPIO, incompatibility with hw PXA SPI framing */
-		GPIO_LOOKUP_IDX("gpio-pxa", GPIO14_MAGICIAN_TSC2046_CS, "cs", 0, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct spi_board_info ads7846_spi_board_info[] __initdata = {
-	{
-		.modalias		= "ads7846",
-		.bus_num		= 2,
-		.max_speed_hz		= 2500000,
-		.platform_data		= &ads7846_pdata,
-		.controller_data	= &tsc2046_chip_info,
-		.irq = PXA_GPIO_TO_IRQ(GPIO115_MAGICIAN_nPEN_IRQ),
-	},
-};
-
-/*
- * Platform devices
- */
-
-static struct platform_device *devices[] __initdata = {
-	&gpio_keys,
-	&egpio,
-	&backlight,
-	&pasic3,
-	&bq24022,
-	&gpio_vbus,
-	&power_supply,
-	&strataflash,
-	&leds_gpio,
-	&vads7846_device,
-};
-
-static struct gpio magician_global_gpios[] = {
-	{ GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" },
-	{ GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" },
-
-	/* NOTICE valid LCD init sequence */
-	{ GPIO106_MAGICIAN_LCD_DCDC_NRESET, GPIOF_OUT_INIT_LOW, "LCD DCDC nreset" },
-	{ GPIO104_MAGICIAN_LCD_VOFF_EN, GPIOF_OUT_INIT_LOW, "LCD VOFF enable" },
-	{ GPIO105_MAGICIAN_LCD_VON_EN, GPIOF_OUT_INIT_LOW, "LCD VON enable" },
-};
-
-static void __init magician_init(void)
-{
-	void __iomem *cpld;
-	int lcd_select;
-	int err;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
-	err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios));
-	if (err)
-		pr_err("magician: Failed to request global GPIOs: %d\n", err);
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-
-	pwm_add_table(magician_pwm_lookup, ARRAY_SIZE(magician_pwm_lookup));
-
-	pxa_set_ficp_info(&magician_ficp_info);
-	pxa27x_set_i2c_power_info(&magician_i2c_power_info);
-	pxa_set_i2c_info(&i2c_info);
-
-	i2c_register_board_info(1,
-		ARRAY_AND_SIZE(magician_pwr_i2c_board_info));
-
-	gpiod_add_lookup_table(&magician_mci_gpio_table);
-	pxa_set_mci_info(&magician_mci_info);
-	pxa_set_ohci_info(&magician_ohci_info);
-	pxa_set_udc_info(&magician_udc_info);
-
-	/* Check LCD type we have */
-	cpld = ioremap(PXA_CS3_PHYS, 0x1000);
-	if (cpld) {
-		u8 board_id = __raw_readb(cpld + 0x14);
-
-		iounmap(cpld);
-		system_rev = board_id & 0x7;
-		lcd_select = board_id & 0x8;
-		pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly");
-		if (lcd_select && (system_rev < 3))
-			/* NOTICE valid LCD init sequence */
-			gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER,
-				GPIOF_OUT_INIT_LOW, "Samsung LCD Power");
-		pxa_set_fb_info(NULL,
-			lcd_select ? &samsung_info : &toppoly_info);
-	} else
-		pr_err("LCD detection: CPLD mapping failed\n");
-
-	gpiod_add_lookup_table(&magician_spi_gpio_table);
-	pxa2xx_set_spi_info(2, &magician_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(ads7846_spi_board_info));
-
-	regulator_register_always_on(0, "power", pwm_backlight_supply,
-		ARRAY_SIZE(pwm_backlight_supply), 5000000);
-
-	gpiod_add_lookup_table(&bq24022_gpiod_table);
-	gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(devices));
-
-	magician_audio_init();
-}
-
-MACHINE_START(MAGICIAN, "HTC Magician")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= MAGICIAN_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_machine	= magician_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/magician.h b/arch/arm/mach-pxa/magician.h
deleted file mode 100644
index e1e4f9f6b22b..000000000000
--- a/arch/arm/mach-pxa/magician.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIO and IRQ definitions for HTC Magician PDA phones
- *
- * Copyright (c) 2007 Philipp Zabel
- */
-
-#ifndef _MAGICIAN_H_
-#define _MAGICIAN_H_
-
-#include <linux/gpio.h>
-#include "irqs.h"
-
-/*
- * PXA GPIOs
- */
-
-#define GPIO0_MAGICIAN_KEY_POWER		0
-#define GPIO9_MAGICIAN_UNKNOWN			9
-#define GPIO10_MAGICIAN_GSM_IRQ			10
-#define GPIO11_MAGICIAN_GSM_OUT1		11
-#define GPIO13_MAGICIAN_CPLD_IRQ		13
-#define GPIO14_MAGICIAN_TSC2046_CS		14
-#define GPIO18_MAGICIAN_UNKNOWN			18
-#define GPIO22_MAGICIAN_VIBRA_EN		22
-#define GPIO26_MAGICIAN_GSM_POWER		26
-#define GPIO27_MAGICIAN_USBC_PUEN		27
-#define GPIO30_MAGICIAN_BQ24022_nCHARGE_EN	30
-#define GPIO37_MAGICIAN_KEY_HANGUP		37
-#define GPIO38_MAGICIAN_KEY_CONTACTS		38
-#define GPIO40_MAGICIAN_GSM_OUT2		40
-#define GPIO48_MAGICIAN_UNKNOWN			48
-#define GPIO56_MAGICIAN_UNKNOWN			56
-#define GPIO57_MAGICIAN_CAM_RESET		57
-#define GPIO75_MAGICIAN_SAMSUNG_POWER		75
-#define GPIO83_MAGICIAN_nIR_EN			83
-#define GPIO86_MAGICIAN_GSM_RESET		86
-#define GPIO87_MAGICIAN_GSM_SELECT		87
-#define GPIO90_MAGICIAN_KEY_CALENDAR		90
-#define GPIO91_MAGICIAN_KEY_CAMERA		91
-#define GPIO93_MAGICIAN_KEY_UP			93
-#define GPIO94_MAGICIAN_KEY_DOWN		94
-#define GPIO95_MAGICIAN_KEY_LEFT		95
-#define GPIO96_MAGICIAN_KEY_RIGHT		96
-#define GPIO97_MAGICIAN_KEY_ENTER		97
-#define GPIO98_MAGICIAN_KEY_RECORD		98
-#define GPIO99_MAGICIAN_HEADPHONE_IN		99
-#define GPIO100_MAGICIAN_KEY_VOL_UP		100
-#define GPIO101_MAGICIAN_KEY_VOL_DOWN 		101
-#define GPIO102_MAGICIAN_KEY_PHONE		102
-#define GPIO103_MAGICIAN_LED_KP			103
-#define GPIO104_MAGICIAN_LCD_VOFF_EN		104
-#define GPIO105_MAGICIAN_LCD_VON_EN		105
-#define GPIO106_MAGICIAN_LCD_DCDC_NRESET	106
-#define GPIO107_MAGICIAN_DS1WM_IRQ		107
-#define GPIO108_MAGICIAN_GSM_READY		108
-#define GPIO114_MAGICIAN_UNKNOWN		114
-#define GPIO115_MAGICIAN_nPEN_IRQ		115
-#define GPIO116_MAGICIAN_nCAM_EN		116
-#define GPIO119_MAGICIAN_UNKNOWN		119
-#define GPIO120_MAGICIAN_UNKNOWN		120
-
-/*
- * CPLD IRQs
- */
-
-#define IRQ_MAGICIAN_SD		(IRQ_BOARD_START + 0)
-#define IRQ_MAGICIAN_EP		(IRQ_BOARD_START + 1)
-#define IRQ_MAGICIAN_BT		(IRQ_BOARD_START + 2)
-#define IRQ_MAGICIAN_VBUS	(IRQ_BOARD_START + 3)
-
-#define MAGICIAN_NR_IRQS	(IRQ_BOARD_START + 8)
-
-/*
- * CPLD EGPIOs
- */
-
-#define MAGICIAN_EGPIO_BASE		PXA_NR_BUILTIN_GPIO
-#define MAGICIAN_EGPIO(reg,bit) \
-	(MAGICIAN_EGPIO_BASE + 8*reg + bit)
-
-/* output */
-
-#define EGPIO_MAGICIAN_TOPPOLY_POWER	MAGICIAN_EGPIO(0, 2)
-#define EGPIO_MAGICIAN_LED_POWER	MAGICIAN_EGPIO(0, 5)
-#define EGPIO_MAGICIAN_GSM_RESET	MAGICIAN_EGPIO(0, 6)
-#define EGPIO_MAGICIAN_LCD_POWER	MAGICIAN_EGPIO(0, 7)
-#define EGPIO_MAGICIAN_SPK_POWER	MAGICIAN_EGPIO(1, 0)
-#define EGPIO_MAGICIAN_EP_POWER		MAGICIAN_EGPIO(1, 1)
-#define EGPIO_MAGICIAN_IN_SEL0		MAGICIAN_EGPIO(1, 2)
-#define EGPIO_MAGICIAN_IN_SEL1		MAGICIAN_EGPIO(1, 3)
-#define EGPIO_MAGICIAN_MIC_POWER	MAGICIAN_EGPIO(1, 4)
-#define EGPIO_MAGICIAN_CODEC_RESET	MAGICIAN_EGPIO(1, 5)
-#define EGPIO_MAGICIAN_CODEC_POWER	MAGICIAN_EGPIO(1, 6)
-#define EGPIO_MAGICIAN_BL_POWER		MAGICIAN_EGPIO(1, 7)
-#define EGPIO_MAGICIAN_SD_POWER		MAGICIAN_EGPIO(2, 0)
-#define EGPIO_MAGICIAN_CARKIT_MIC	MAGICIAN_EGPIO(2, 1)
-#define EGPIO_MAGICIAN_IR_RX_SHUTDOWN	MAGICIAN_EGPIO(2, 2)
-#define EGPIO_MAGICIAN_FLASH_VPP	MAGICIAN_EGPIO(2, 3)
-#define EGPIO_MAGICIAN_BL_POWER2	MAGICIAN_EGPIO(2, 4)
-#define EGPIO_MAGICIAN_BQ24022_ISET2	MAGICIAN_EGPIO(2, 5)
-#define EGPIO_MAGICIAN_NICD_CHARGE	MAGICIAN_EGPIO(2, 6)
-#define EGPIO_MAGICIAN_GSM_POWER	MAGICIAN_EGPIO(2, 7)
-
-/* input */
-
-/* USB or AC charger type */
-#define EGPIO_MAGICIAN_CABLE_TYPE	MAGICIAN_EGPIO(4, 0)
-/*
- * Vbus is detected
- * FIXME behaves like (6,3), may differ for host/device
- */
-#define EGPIO_MAGICIAN_CABLE_VBUS	MAGICIAN_EGPIO(4, 1)
-
-#define EGPIO_MAGICIAN_BOARD_ID0	MAGICIAN_EGPIO(5, 0)
-#define EGPIO_MAGICIAN_BOARD_ID1	MAGICIAN_EGPIO(5, 1)
-#define EGPIO_MAGICIAN_BOARD_ID2	MAGICIAN_EGPIO(5, 2)
-#define EGPIO_MAGICIAN_LCD_SELECT	MAGICIAN_EGPIO(5, 3)
-#define EGPIO_MAGICIAN_nSD_READONLY	MAGICIAN_EGPIO(5, 4)
-
-#define EGPIO_MAGICIAN_EP_INSERT	MAGICIAN_EGPIO(6, 1)
-/* FIXME behaves like (4,1), may differ for host/device */
-#define EGPIO_MAGICIAN_CABLE_INSERTED	MAGICIAN_EGPIO(6, 3)
-
-#endif /* _MAGICIAN_H_ */
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
deleted file mode 100644
index fd386f1c414c..000000000000
--- a/arch/arm/mach-pxa/mainstone.c
+++ /dev/null
@@ -1,738 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/mainstone.c
- *
- *  Support for the Intel HCDDBBVA0 Development Platform.
- *  (go figure how they came up with such name...)
- *
- *  Author:	Nicolas Pitre
- *  Created:	Nov 05, 2002
- *  Copyright:	MontaVista Software Inc.
- */
-#include <linux/gpio.h>
-#include <linux/gpio/gpio-reg.h>
-#include <linux/gpio/machine.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/ioport.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/smc91x.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include "pxa27x.h"
-#include "mainstone.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "addr-map.h"
-#include "smemc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long mainstone_pin_config[] = {
-	/* Chip Select */
-	GPIO15_nCS_1,
-
-	/* LCD - 16bpp Active TFT */
-	GPIOxx_LCD_TFT_16BPP,
-	GPIO16_PWM0_OUT,	/* Backlight */
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	/* USB Host Port 1 */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO45_AC97_SYSCLK,
-
-	/* Keypad */
-	GPIO93_KP_DKIN_0,
-	GPIO94_KP_DKIN_1,
-	GPIO95_KP_DKIN_2,
-	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO99_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-	GPIO96_KP_MKOUT_6,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* GPIO */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (MST_ETH_PHYS + 0x300),
-		.end	= (MST_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MAINSTONE_IRQ(3),
-		.end	= MAINSTONE_IRQ(3),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata mainstone_smc91x_info = {
-	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
-		  SMC91X_NOWAIT | SMC91X_USE_DMA,
-	.pxa_u16_align4 = true,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &mainstone_smc91x_info,
-	},
-};
-
-static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
-{
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		MST_MSCWR2 &= ~MST_MSCWR2_AC97_SPKROFF;
-	return 0;
-}
-
-static void mst_audio_shutdown(struct snd_pcm_substream *substream, void *priv)
-{
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
-}
-
-static long mst_audio_suspend_mask;
-
-static void mst_audio_suspend(void *priv)
-{
-	mst_audio_suspend_mask = MST_MSCWR2;
-	MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
-}
-
-static void mst_audio_resume(void *priv)
-{
-	MST_MSCWR2 &= mst_audio_suspend_mask | ~MST_MSCWR2_AC97_SPKROFF;
-}
-
-static pxa2xx_audio_ops_t mst_audio_ops = {
-	.startup	= mst_audio_startup,
-	.shutdown	= mst_audio_shutdown,
-	.suspend	= mst_audio_suspend,
-	.resume		= mst_audio_resume,
-};
-
-static struct resource flash_resources[] = {
-	[0] = {
-		.start	= PXA_CS0_PHYS,
-		.end	= PXA_CS0_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_CS1_PHYS,
-		.end	= PXA_CS1_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition mainstoneflash0_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	},{
-		.name =		"Kernel",
-		.size =		0x00400000,
-		.offset =	0x00040000,
-	},{
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00440000
-	}
-};
-
-static struct flash_platform_data mst_flash_data[2] = {
-	{
-		.map_name	= "cfi_probe",
-		.parts		= mainstoneflash0_partitions,
-		.nr_parts	= ARRAY_SIZE(mainstoneflash0_partitions),
-	}, {
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	}
-};
-
-static struct platform_device mst_flash_device[2] = {
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 0,
-		.dev = {
-			.platform_data = &mst_flash_data[0],
-		},
-		.resource = &flash_resources[0],
-		.num_resources = 1,
-	},
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 1,
-		.dev = {
-			.platform_data = &mst_flash_data[1],
-		},
-		.resource = &flash_resources[1],
-		.num_resources = 1,
-	},
-};
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pwm_lookup mainstone_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data mainstone_backlight_data = {
-	.max_brightness	= 1023,
-	.dft_brightness	= 1023,
-};
-
-static struct platform_device mainstone_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm0.dev,
-		.platform_data = &mainstone_backlight_data,
-	},
-};
-
-static void __init mainstone_backlight_register(void)
-{
-	int ret;
-
-	pwm_add_table(mainstone_pwm_lookup, ARRAY_SIZE(mainstone_pwm_lookup));
-
-	ret = platform_device_register(&mainstone_backlight_device);
-	if (ret) {
-		printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
-		pwm_remove_table(mainstone_pwm_lookup,
-				 ARRAY_SIZE(mainstone_pwm_lookup));
-	}
-}
-#else
-#define mainstone_backlight_register()	do { } while (0)
-#endif
-
-static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
-	.pixclock		= 50000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 1,
-	.left_margin		= 0x9f,
-	.right_margin		= 1,
-	.vsync_len		= 44,
-	.upper_margin		= 0,
-	.lower_margin		= 0,
-	.sync			= FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
-	.pixclock		= 110000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 4,
-	.left_margin		= 8,
-	.right_margin		= 20,
-	.vsync_len		= 3,
-	.upper_margin		= 1,
-	.lower_margin		= 10,
-	.sync			= FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info mainstone_pxafb_info = {
-	.num_modes      	= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_int, void *data)
-{
-	int err;
-
-	/* make sure SD/Memory Stick multiplexer's signals
-	 * are routed to MMC controller
-	 */
-	MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
-
-	err = request_irq(MAINSTONE_MMC_IRQ, mstone_detect_int, 0,
-			     "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "mainstone_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-
-	return err;
-}
-
-static int mainstone_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if (( 1 << vdd) & p_d->ocr_mask) {
-		printk(KERN_DEBUG "%s: on\n", __func__);
-		MST_MSCWR1 |= MST_MSCWR1_MMC_ON;
-		MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
-	} else {
-		printk(KERN_DEBUG "%s: off\n", __func__);
-		MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
-	}
-	return 0;
-}
-
-static void mainstone_mci_exit(struct device *dev, void *data)
-{
-	free_irq(MAINSTONE_MMC_IRQ, data);
-}
-
-static struct pxamci_platform_data mainstone_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 			= mainstone_mci_init,
-	.setpower 		= mainstone_mci_setpower,
-	.exit			= mainstone_mci_exit,
-};
-
-static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (mode & IR_SIRMODE) {
-		MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR;
-	} else if (mode & IR_FIRMODE) {
-		MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
-	}
-	pxa2xx_transceiver_mode(dev, mode);
-	if (mode & IR_OFF) {
-		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
-	} else {
-		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL;
-	}
-	local_irq_restore(flags);
-}
-
-static struct pxaficp_platform_data mainstone_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= mainstone_irda_transceiver_mode,
-};
-
-static struct gpio_keys_button gpio_keys_button[] = {
-	[0] = {
-		.desc	= "wakeup",
-		.code	= KEY_SUSPEND,
-		.type	= EV_KEY,
-		.gpio	= 1,
-		.wakeup	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data mainstone_gpio_keys = {
-	.buttons	= gpio_keys_button,
-	.nbuttons	= 1,
-};
-
-static struct platform_device mst_gpio_keys_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &mainstone_gpio_keys,
-	},
-};
-
-static struct resource mst_cplds_resources[] = {
-	[0] = {
-		.start	= MST_FPGA_PHYS + 0xc0,
-		.end	= MST_FPGA_PHYS + 0xe0 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(0),
-		.end	= PXA_GPIO_TO_IRQ(0),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-	[2] = {
-		.start	= MAINSTONE_IRQ(0),
-		.end	= MAINSTONE_IRQ(15),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mst_cplds_device = {
-	.name		= "pxa_cplds_irqs",
-	.id		= -1,
-	.resource	= &mst_cplds_resources[0],
-	.num_resources	= 3,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&smc91x_device,
-	&mst_flash_device[0],
-	&mst_flash_device[1],
-	&mst_gpio_keys_device,
-	&mst_cplds_device,
-};
-
-static struct pxaohci_platform_data mainstone_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int mainstone_matrix_keys[] = {
-	KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
-	KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
-	KEY(0, 1, KEY_G), KEY(1, 1, KEY_H), KEY(2, 1, KEY_I),
-	KEY(3, 1, KEY_J), KEY(4, 1, KEY_K), KEY(5, 1, KEY_L),
-	KEY(0, 2, KEY_M), KEY(1, 2, KEY_N), KEY(2, 2, KEY_O),
-	KEY(3, 2, KEY_P), KEY(4, 2, KEY_Q), KEY(5, 2, KEY_R),
-	KEY(0, 3, KEY_S), KEY(1, 3, KEY_T), KEY(2, 3, KEY_U),
-	KEY(3, 3, KEY_V), KEY(4, 3, KEY_W), KEY(5, 3, KEY_X),
-	KEY(2, 4, KEY_Y), KEY(3, 4, KEY_Z),
-
-	KEY(0, 4, KEY_DOT),	/* . */
-	KEY(1, 4, KEY_CLOSE),	/* @ */
-	KEY(4, 4, KEY_SLASH),
-	KEY(5, 4, KEY_BACKSLASH),
-	KEY(0, 5, KEY_HOME),
-	KEY(1, 5, KEY_LEFTSHIFT),
-	KEY(2, 5, KEY_SPACE),
-	KEY(3, 5, KEY_SPACE),
-	KEY(4, 5, KEY_ENTER),
-	KEY(5, 5, KEY_BACKSPACE),
-
-	KEY(0, 6, KEY_UP),
-	KEY(1, 6, KEY_DOWN),
-	KEY(2, 6, KEY_LEFT),
-	KEY(3, 6, KEY_RIGHT),
-	KEY(4, 6, KEY_SELECT),
-};
-
-static struct matrix_keymap_data mainstone_matrix_keymap_data = {
-	.keymap			= mainstone_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(mainstone_matrix_keys),
-};
-
-struct pxa27x_keypad_platform_data mainstone_keypad_info = {
-	.matrix_key_rows	= 6,
-	.matrix_key_cols	= 7,
-	.matrix_keymap_data	= &mainstone_matrix_keymap_data,
-
-	.enable_rotary0		= 1,
-	.rotary0_up_key		= KEY_UP,
-	.rotary0_down_key	= KEY_DOWN,
-
-	.debounce_interval	= 30,
-};
-
-static void __init mainstone_init_keypad(void)
-{
-	pxa_set_keypad_info(&mainstone_keypad_info);
-}
-#else
-static inline void mainstone_init_keypad(void) {}
-#endif
-
-static int mst_pcmcia0_irqs[11] = {
-	[0 ... 4] = -1,
-	[5] = MAINSTONE_S0_CD_IRQ,
-	[6 ... 7] = -1,
-	[8] = MAINSTONE_S0_STSCHG_IRQ,
-	[9] = -1,
-	[10] = MAINSTONE_S0_IRQ,
-};
-
-static int mst_pcmcia1_irqs[11] = {
-	[0 ... 4] = -1,
-	[5] = MAINSTONE_S1_CD_IRQ,
-	[6 ... 7] = -1,
-	[8] = MAINSTONE_S1_STSCHG_IRQ,
-	[9] = -1,
-	[10] = MAINSTONE_S1_IRQ,
-};
-
-static struct gpiod_lookup_table mainstone_pcmcia_gpio_table = {
-	.dev_id = "pxa2xx-pcmcia",
-	.table = {
-		GPIO_LOOKUP("mst-pcmcia0",  0, "a0vpp",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0",  1, "a1vpp",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0",  2, "a0vcc",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0",  3, "a1vcc",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0",  4, "areset",  GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0",  5, "adetect", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("mst-pcmcia0",  6, "avs1",    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("mst-pcmcia0",  7, "avs2",    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("mst-pcmcia0",  8, "abvd1",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0",  9, "abvd2",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0", 10, "aready",  GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  0, "b0vpp",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  1, "b1vpp",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  2, "b0vcc",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  3, "b1vcc",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  4, "breset",  GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  5, "bdetect", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("mst-pcmcia1",  6, "bvs1",    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("mst-pcmcia1",  7, "bvs2",    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("mst-pcmcia1",  8, "bbvd1",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  9, "bbvd2",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1", 10, "bready",  GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table mainstone_wm97xx_gpio_table = {
-	.dev_id = "wm97xx-touch",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", 4, "touch", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init mainstone_init(void)
-{
-	int SW7 = 0;  /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config));
-
-	/* Register board control register(s) as GPIOs */
-	gpio_reg_init(NULL, (void __iomem *)&MST_PCMCIA0, -1, 11,
-		      "mst-pcmcia0", MST_PCMCIA_INPUTS, 0, NULL,
-		      NULL, mst_pcmcia0_irqs);
-	gpio_reg_init(NULL, (void __iomem *)&MST_PCMCIA1, -1, 11,
-		      "mst-pcmcia1", MST_PCMCIA_INPUTS, 0, NULL,
-		      NULL, mst_pcmcia1_irqs);
-	gpiod_add_lookup_table(&mainstone_pcmcia_gpio_table);
-	gpiod_add_lookup_table(&mainstone_wm97xx_gpio_table);
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	mst_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
-	mst_flash_data[1].width = 4;
-
-	/* Compensate for SW7 which swaps the flash banks */
-	mst_flash_data[SW7].name = "processor-flash";
-	mst_flash_data[SW7 ^ 1].name = "mainboard-flash";
-
-	printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
-	       mst_flash_data[0].name);
-
-	/* system bus arbiter setting
-	 * - Core_Park
-	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
-	 */
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-	/* reading Mainstone's "Virtual Configuration Register"
-	   might be handy to select LCD type here */
-	if (0)
-		mainstone_pxafb_info.modes = &toshiba_ltm04c380k_mode;
-	else
-		mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
-
-	pxa_set_fb_info(NULL, &mainstone_pxafb_info);
-	mainstone_backlight_register();
-
-	pxa_set_mci_info(&mainstone_mci_platform_data);
-	pxa_set_ficp_info(&mainstone_ficp_platform_data);
-	pxa_set_ohci_info(&mainstone_ohci_platform_data);
-	pxa_set_i2c_info(NULL);
-	pxa_set_ac97_info(&mst_audio_ops);
-
-	mainstone_init_keypad();
-}
-
-
-static struct map_desc mainstone_io_desc[] __initdata = {
-  	{	/* CPLD */
-		.virtual	=  MST_FPGA_VIRT,
-		.pfn		= __phys_to_pfn(MST_FPGA_PHYS),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init mainstone_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc));
-
- 	/*	for use I SRAM as framebuffer.	*/
- 	PSLR |= 0xF04;
- 	PCFR = 0x66;
-}
-
-/*
- * Driver for the 8 discrete LEDs available for general use:
- * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
- * so be sure to not monkey with them here.
- */
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-struct mainstone_led {
-	struct led_classdev	cdev;
-	u8			mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
-	const char *name;
-	const char *trigger;
-} mainstone_leds[] = {
-	{ "mainstone:D28", "default-on", },
-	{ "mainstone:D27", "cpu0", },
-	{ "mainstone:D26", "heartbeat" },
-	{ "mainstone:D25", },
-	{ "mainstone:D24", },
-	{ "mainstone:D23", },
-	{ "mainstone:D22", },
-	{ "mainstone:D21", },
-};
-
-static void mainstone_led_set(struct led_classdev *cdev,
-			      enum led_brightness b)
-{
-	struct mainstone_led *led = container_of(cdev,
-					 struct mainstone_led, cdev);
-	u32 reg = MST_LEDCTRL;
-
-	if (b != LED_OFF)
-		reg |= led->mask;
-	else
-		reg &= ~led->mask;
-
-	MST_LEDCTRL = reg;
-}
-
-static enum led_brightness mainstone_led_get(struct led_classdev *cdev)
-{
-	struct mainstone_led *led = container_of(cdev,
-					 struct mainstone_led, cdev);
-	u32 reg = MST_LEDCTRL;
-
-	return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static int __init mainstone_leds_init(void)
-{
-	int i;
-
-	if (!machine_is_mainstone())
-		return -ENODEV;
-
-	/* All ON */
-	MST_LEDCTRL |= 0xff;
-	for (i = 0; i < ARRAY_SIZE(mainstone_leds); i++) {
-		struct mainstone_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = mainstone_leds[i].name;
-		led->cdev.brightness_set = mainstone_led_set;
-		led->cdev.brightness_get = mainstone_led_get;
-		led->cdev.default_trigger = mainstone_leds[i].trigger;
-		led->mask = BIT(i);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(mainstone_leds_init);
-#endif
-
-MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
-	/* Maintainer: MontaVista Software Inc. */
-	.atag_offset	= 0x100,	/* BLOB boot parameter setting */
-	.map_io		= mainstone_map_io,
-	.nr_irqs	= MAINSTONE_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= mainstone_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.h b/arch/arm/mach-pxa/mainstone.h
deleted file mode 100644
index f116c56cf5d9..000000000000
--- a/arch/arm/mach-pxa/mainstone.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Author:	Nicolas Pitre
- *  Created:	Nov 14, 2002
- *  Copyright:	MontaVista Software Inc.
- */
-
-#ifndef ASM_ARCH_MAINSTONE_H
-#define ASM_ARCH_MAINSTONE_H
-
-#include "irqs.h"
-
-#define MST_ETH_PHYS		PXA_CS4_PHYS
-
-#define MST_FPGA_PHYS		PXA_CS2_PHYS
-#define MST_FPGA_VIRT		(0xf0000000)
-#define MST_P2V(x)		((x) - MST_FPGA_PHYS + MST_FPGA_VIRT)
-#define MST_V2P(x)		((x) - MST_FPGA_VIRT + MST_FPGA_PHYS)
-
-#ifndef __ASSEMBLY__
-# define __MST_REG(x)		(*((volatile unsigned long *)MST_P2V(x)))
-#else
-# define __MST_REG(x)		MST_P2V(x)
-#endif
-
-/* board level registers in the FPGA */
-
-#define MST_LEDDAT1		__MST_REG(0x08000010)
-#define MST_LEDDAT2		__MST_REG(0x08000014)
-#define MST_LEDCTRL		__MST_REG(0x08000040)
-#define MST_GPSWR		__MST_REG(0x08000060)
-#define MST_MSCWR1		__MST_REG(0x08000080)
-#define MST_MSCWR2		__MST_REG(0x08000084)
-#define MST_MSCWR3		__MST_REG(0x08000088)
-#define MST_MSCRD		__MST_REG(0x08000090)
-#define MST_INTMSKENA		__MST_REG(0x080000c0)
-#define MST_INTSETCLR		__MST_REG(0x080000d0)
-#define MST_PCMCIA0		__MST_REG(0x080000e0)
-#define MST_PCMCIA1		__MST_REG(0x080000e4)
-
-#define MST_MSCWR1_CAMERA_ON	(1 << 15)  /* Camera interface power control */
-#define MST_MSCWR1_CAMERA_SEL	(1 << 14)  /* Camera interface mux control */
-#define MST_MSCWR1_LCD_CTL	(1 << 13)  /* General-purpose LCD control */
-#define MST_MSCWR1_MS_ON	(1 << 12)  /* Memory Stick power control */
-#define MST_MSCWR1_MMC_ON	(1 << 11)  /* MultiMediaCard* power control */
-#define MST_MSCWR1_MS_SEL	(1 << 10)  /* SD/MS multiplexer control */
-#define MST_MSCWR1_BB_SEL	(1 << 9)   /* PCMCIA/Baseband multiplexer */
-#define MST_MSCWR1_BT_ON	(1 << 8)   /* Bluetooth UART transceiver */
-#define MST_MSCWR1_BTDTR	(1 << 7)   /* Bluetooth UART DTR */
-
-#define MST_MSCWR1_IRDA_MASK	(3 << 5)   /* IrDA transceiver mode */
-#define MST_MSCWR1_IRDA_FULL	(0 << 5)   /* full distance power */
-#define MST_MSCWR1_IRDA_OFF	(1 << 5)   /* shutdown */
-#define MST_MSCWR1_IRDA_MED	(2 << 5)   /* 2/3 distance power */
-#define MST_MSCWR1_IRDA_LOW	(3 << 5)   /* 1/3 distance power */
-
-#define MST_MSCWR1_IRDA_FIR	(1 << 4)   /* IrDA transceiver SIR/FIR */
-#define MST_MSCWR1_GREENLED	(1 << 3)   /* LED D1 control */
-#define MST_MSCWR1_PDC_CTL	(1 << 2)   /* reserved */
-#define MST_MSCWR1_MTR_ON	(1 << 1)   /* Silent alert motor */
-#define MST_MSCWR1_SYSRESET	(1 << 0)   /* System reset */
-
-#define MST_MSCWR2_USB_OTG_RST	(1 << 6)   /* USB On The Go reset */
-#define MST_MSCWR2_USB_OTG_SEL	(1 << 5)   /* USB On The Go control */
-#define MST_MSCWR2_nUSBC_SC	(1 << 4)   /* USB client soft connect control */
-#define MST_MSCWR2_I2S_SPKROFF	(1 << 3)   /* I2S CODEC amplifier control */
-#define MST_MSCWR2_AC97_SPKROFF	(1 << 2)   /* AC97 CODEC amplifier control */
-#define MST_MSCWR2_RADIO_PWR	(1 << 1)   /* Radio module power control */
-#define MST_MSCWR2_RADIO_WAKE	(1 << 0)   /* Radio module wake-up signal */
-
-#define MST_MSCWR3_GPIO_RESET_EN	(1 << 2) /* Enable GPIO Reset */
-#define MST_MSCWR3_GPIO_RESET		(1 << 1) /* Initiate a GPIO Reset */
-#define MST_MSCWR3_COMMS_SW_RESET	(1 << 0) /* Communications Processor Reset Control */
-
-#define MST_MSCRD_nPENIRQ	(1 << 9)   /* ADI7873* nPENIRQ signal */
-#define MST_MSCRD_nMEMSTK_CD	(1 << 8)   /* Memory Stick detection signal */
-#define MST_MSCRD_nMMC_CD	(1 << 7)   /* SD/MMC card detection signal */
-#define MST_MSCRD_nUSIM_CD	(1 << 6)   /* USIM card detection signal */
-#define MST_MSCRD_USB_CBL	(1 << 5)   /* USB client cable status */
-#define MST_MSCRD_TS_BUSY	(1 << 4)   /* ADI7873 busy */
-#define MST_MSCRD_BTDSR		(1 << 3)   /* Bluetooth UART DSR */
-#define MST_MSCRD_BTRI		(1 << 2)   /* Bluetooth UART Ring Indicator */
-#define MST_MSCRD_BTDCD		(1 << 1)   /* Bluetooth UART DCD */
-#define MST_MSCRD_nMMC_WP	(1 << 0)   /* SD/MMC write-protect status */
-
-#define MST_INT_S1_IRQ		(1 << 15)  /* PCMCIA socket 1 IRQ */
-#define MST_INT_S1_STSCHG	(1 << 14)  /* PCMCIA socket 1 status changed */
-#define MST_INT_S1_CD		(1 << 13)  /* PCMCIA socket 1 card detection */
-#define MST_INT_S0_IRQ		(1 << 11)  /* PCMCIA socket 0 IRQ */
-#define MST_INT_S0_STSCHG	(1 << 10)  /* PCMCIA socket 0 status changed */
-#define MST_INT_S0_CD		(1 << 9)   /* PCMCIA socket 0 card detection */
-#define MST_INT_nEXBRD_INT	(1 << 7)   /* Expansion board IRQ */
-#define MST_INT_MSINS		(1 << 6)   /* Memory Stick* detection */
-#define MST_INT_PENIRQ		(1 << 5)   /* ADI7873* touch-screen IRQ */
-#define MST_INT_AC97		(1 << 4)   /* AC'97 CODEC IRQ */
-#define MST_INT_ETHERNET	(1 << 3)   /* Ethernet controller IRQ */
-#define MST_INT_USBC		(1 << 2)   /* USB client cable detection IRQ */
-#define MST_INT_USIM		(1 << 1)   /* USIM card detection IRQ */
-#define MST_INT_MMC		(1 << 0)   /* MMC/SD card detection IRQ */
-
-#define MST_PCMCIA_nIRQ		(1 << 10)  /* IRQ / ready signal */
-#define MST_PCMCIA_nSPKR_BVD2	(1 << 9)   /* VDD sense / digital speaker */
-#define MST_PCMCIA_nSTSCHG_BVD1	(1 << 8)   /* VDD sense / card status changed */
-#define MST_PCMCIA_nVS2		(1 << 7)   /* VSS voltage sense */
-#define MST_PCMCIA_nVS1		(1 << 6)   /* VSS voltage sense */
-#define MST_PCMCIA_nCD		(1 << 5)   /* Card detection signal */
-#define MST_PCMCIA_RESET	(1 << 4)   /* Card reset signal */
-#define MST_PCMCIA_PWR_MASK	(0x000f)   /* MAX1602 power-supply controls */
-
-#define MST_PCMCIA_PWR_VPP_0    0x0	   /* voltage VPP = 0V */
-#define MST_PCMCIA_PWR_VPP_120  0x2 	   /* voltage VPP = 12V*/
-#define MST_PCMCIA_PWR_VPP_VCC  0x1	   /* voltage VPP = VCC */
-#define MST_PCMCIA_PWR_VCC_0    0x0	   /* voltage VCC = 0V */
-#define MST_PCMCIA_PWR_VCC_33   0x8	   /* voltage VCC = 3.3V */
-#define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
-
-#define MST_PCMCIA_INPUTS \
-	(MST_PCMCIA_nIRQ | MST_PCMCIA_nSPKR_BVD2 | MST_PCMCIA_nSTSCHG_BVD1 | \
-	 MST_PCMCIA_nVS2 | MST_PCMCIA_nVS1 | MST_PCMCIA_nCD)
-
-/* board specific IRQs */
-#define MAINSTONE_NR_IRQS	IRQ_BOARD_START
-
-#define MAINSTONE_IRQ(x)	(MAINSTONE_NR_IRQS + (x))
-#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
-#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
-#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
-#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
-#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
-#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
-#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
-#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
-#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
-#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
-#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
-#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
-#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
-#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
-
-#endif
diff --git a/arch/arm/mach-pxa/mfp-pxa25x.h b/arch/arm/mach-pxa/mfp-pxa25x.h
index d0ebb2154503..3dc5c833e28f 100644
--- a/arch/arm/mach-pxa/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/mfp-pxa25x.h
@@ -158,39 +158,6 @@
 #define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
 #define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
 
-#ifdef CONFIG_CPU_PXA26x
-/* GPIO */
-#define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
-#define GPIO86_GPIO		MFP_CFG_IN(GPIO86, AF1)
-#define GPIO87_GPIO		MFP_CFG_IN(GPIO87, AF1)
-#define GPIO88_GPIO		MFP_CFG_IN(GPIO88, AF1)
-#define GPIO89_GPIO		MFP_CFG_IN(GPIO89, AF1)
-
-/* SDRAM */
-#define GPIO86_nSDCS2		MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
-#define GPIO87_nSDCS3		MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
-#define GPIO88_RDnWR		MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
-
-/* USB */
-#define GPIO9_USB_RCV		MFP_CFG_IN(GPIO9, AF1)
-#define GPIO32_USB_VP		MFP_CFG_IN(GPIO32, AF2)
-#define GPIO34_USB_VM		MFP_CFG_IN(GPIO34, AF2)
-#define GPIO39_USB_VPO		MFP_CFG_OUT(GPIO39, AF3, DRIVE_LOW)
-#define GPIO56_USB_VMO		MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
-#define GPIO57_USB_nOE		MFP_CFG_OUT(GPIO57, AF1, DRIVE_HIGH)
-
-/* ASSP */
-#define GPIO28_ASSP_BITCLK_IN	MFP_CFG_IN(GPIO28, AF3)
-#define GPIO28_ASSP_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF3, DRIVE_LOW)
-#define GPIO29_ASSP_RXD		MFP_CFG_IN(GPIO29, AF3)
-#define GPIO30_ASSP_TXD		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
-#define GPIO31_ASSP_SFRM_IN	MFP_CFG_IN(GPIO31, AF1)
-#define GPIO31_ASSP_SFRM_OUT	MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
-
-/* AC97 */
-#define GPIO89_AC97_nRESET	MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
-#endif	/* CONFIG_CPU_PXA26x */
-
 /* commonly used pin configurations */
 #define GPIOxx_LCD_16BPP	\
 	GPIO58_LCD_LDD_0,	\
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 57b0782880de..f5a3d890f682 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -20,6 +20,7 @@
 
 #include "pxa2xx-regs.h"
 #include "mfp-pxa2xx.h"
+#include "mfp-pxa27x.h"
 
 #include "generic.h"
 
@@ -226,11 +227,7 @@ static void __init pxa25x_mfp_init(void)
 	int i;
 
 	/* running before pxa_gpio_probe() */
-#ifdef CONFIG_CPU_PXA26x
-	pxa_last_gpio = 89;
-#else
 	pxa_last_gpio = 84;
-#endif
 	for (i = 0; i <= pxa_last_gpio; i++)
 		gpio_desc[i].valid = 1;
 
diff --git a/arch/arm/mach-pxa/mfp-pxa930.h b/arch/arm/mach-pxa/mfp-pxa930.h
deleted file mode 100644
index 0d195d3a8c61..000000000000
--- a/arch/arm/mach-pxa/mfp-pxa930.h
+++ /dev/null
@@ -1,495 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-pxa/include/mach/mfp-pxa930.h
- *
- * PXA930 specific MFP configuration definitions
- *
- * Copyright (C) 2007-2008 Marvell International Ltd.
- */
-
-#ifndef __ASM_ARCH_MFP_PXA9xx_H
-#define __ASM_ARCH_MFP_PXA9xx_H
-
-#include "mfp-pxa3xx.h"
-
-/* GPIO */
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
-#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
-#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
-
-#define GSIM_UCLK_GPIO_79	MFP_CFG(GSIM_UCLK, AF0)
-#define GSIM_UIO_GPIO_80	MFP_CFG(GSIM_UIO, AF0)
-#define GSIM_nURST_GPIO_81	MFP_CFG(GSIM_nURST, AF0)
-#define GSIM_UDET_GPIO_82	MFP_CFG(GSIM_UDET, AF0)
-
-#define DF_IO15_GPIO_28		MFP_CFG(DF_IO15, AF0)
-#define DF_IO14_GPIO_29		MFP_CFG(DF_IO14, AF0)
-#define DF_IO13_GPIO_30		MFP_CFG(DF_IO13, AF0)
-#define DF_IO12_GPIO_31		MFP_CFG(DF_IO12, AF0)
-#define DF_IO11_GPIO_32		MFP_CFG(DF_IO11, AF0)
-#define DF_IO10_GPIO_33		MFP_CFG(DF_IO10, AF0)
-#define DF_IO9_GPIO_34		MFP_CFG(DF_IO9, AF0)
-#define DF_IO8_GPIO_35		MFP_CFG(DF_IO8, AF0)
-#define DF_IO7_GPIO_36		MFP_CFG(DF_IO7, AF0)
-#define DF_IO6_GPIO_37		MFP_CFG(DF_IO6, AF0)
-#define DF_IO5_GPIO_38		MFP_CFG(DF_IO5, AF0)
-#define DF_IO4_GPIO_39		MFP_CFG(DF_IO4, AF0)
-#define DF_IO3_GPIO_40		MFP_CFG(DF_IO3, AF0)
-#define DF_IO2_GPIO_41		MFP_CFG(DF_IO2, AF0)
-#define DF_IO1_GPIO_42		MFP_CFG(DF_IO1, AF0)
-#define DF_IO0_GPIO_43		MFP_CFG(DF_IO0, AF0)
-#define DF_nCS0_GPIO_44		MFP_CFG(DF_nCS0, AF0)
-#define DF_nCS1_GPIO_45		MFP_CFG(DF_nCS1, AF0)
-#define DF_nWE_GPIO_46		MFP_CFG(DF_nWE, AF0)
-#define DF_nRE_nOE_GPIO_47	MFP_CFG(DF_nRE_nOE, AF0)
-#define DF_CLE_nOE_GPIO_48	MFP_CFG(DF_CLE_nOE, AF0)
-#define DF_nADV1_ALE_GPIO_49	MFP_CFG(DF_nADV1_ALE, AF0)
-#define DF_nADV2_ALE_GPIO_50	MFP_CFG(DF_nADV2_ALE, AF0)
-#define DF_INT_RnB_GPIO_51	MFP_CFG(DF_INT_RnB, AF0)
-#define DF_SCLK_E_GPIO_52	MFP_CFG(DF_SCLK_E, AF0)
-
-#define DF_ADDR0_GPIO_53	MFP_CFG(DF_ADDR0, AF0)
-#define DF_ADDR1_GPIO_54	MFP_CFG(DF_ADDR1, AF0)
-#define DF_ADDR2_GPIO_55	MFP_CFG(DF_ADDR2, AF0)
-#define DF_ADDR3_GPIO_56	MFP_CFG(DF_ADDR3, AF0)
-#define nXCVREN_GPIO_57		MFP_CFG(nXCVREN, AF0)
-#define nLUA_GPIO_58		MFP_CFG(nLUA, AF0)
-#define nLLA_GPIO_59		MFP_CFG(nLLA, AF0)
-#define nBE0_GPIO_60		MFP_CFG(nBE0, AF0)
-#define nBE1_GPIO_61		MFP_CFG(nBE1, AF0)
-#define RDY_GPIO_62		MFP_CFG(RDY, AF0)
-#define PMIC_INT_GPIO83		MFP_CFG_LPM(PMIC_INT, AF0, PULL_HIGH)
-
-/* Chip Select */
-#define DF_nCS0_nCS2		MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
-#define DF_nCS1_nCS3		MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH)
-
-/* AC97 */
-#define GPIO83_BAC97_SYSCLK	MFP_CFG(GPIO83, AF3)
-#define GPIO84_BAC97_SDATA_IN0	MFP_CFG(GPIO84, AF3)
-#define GPIO85_BAC97_BITCLK	MFP_CFG(GPIO85, AF3)
-#define GPIO86_BAC97_nRESET	MFP_CFG(GPIO86, AF3)
-#define GPIO87_BAC97_SYNC	MFP_CFG(GPIO87, AF3)
-#define GPIO88_BAC97_SDATA_OUT	MFP_CFG(GPIO88, AF3)
-
-/* I2C */
-#define GPIO39_CI2C_SCL		MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH)
-#define GPIO40_CI2C_SDA		MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH)
-
-#define GPIO51_CI2C_SCL		MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH)
-#define GPIO52_CI2C_SDA		MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH)
-
-#define GPIO63_CI2C_SCL		MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
-#define GPIO64_CI2C_SDA		MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
-
-#define GPIO73_CI2C_SCL		MFP_CFG_LPM(GPIO73, AF1, PULL_HIGH)
-#define GPIO74_CI2C_SDA		MFP_CFG_LPM(GPIO74, AF1, PULL_HIGH)
-
-#define GPIO77_CI2C_SCL		MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
-#define GPIO78_CI2C_SDA		MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
-
-#define GPIO89_CI2C_SCL		MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH)
-#define GPIO90_CI2C_SDA		MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH)
-
-#define GPIO95_CI2C_SCL		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
-#define GPIO96_CI2C_SDA		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
-
-#define GPIO97_CI2C_SCL		MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH)
-#define GPIO98_CI2C_SDA		MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH)
-
-/* QCI */
-#define GPIO63_CI_DD_9		MFP_CFG_LPM(GPIO63, AF1, PULL_LOW)
-#define GPIO64_CI_DD_8		MFP_CFG_LPM(GPIO64, AF1, PULL_LOW)
-#define GPIO65_CI_DD_7		MFP_CFG_LPM(GPIO65, AF1, PULL_LOW)
-#define GPIO66_CI_DD_6		MFP_CFG_LPM(GPIO66, AF1, PULL_LOW)
-#define GPIO67_CI_DD_5		MFP_CFG_LPM(GPIO67, AF1, PULL_LOW)
-#define GPIO68_CI_DD_4		MFP_CFG_LPM(GPIO68, AF1, PULL_LOW)
-#define GPIO69_CI_DD_3		MFP_CFG_LPM(GPIO69, AF1, PULL_LOW)
-#define GPIO70_CI_DD_2		MFP_CFG_LPM(GPIO70, AF1, PULL_LOW)
-#define GPIO71_CI_DD_1		MFP_CFG_LPM(GPIO71, AF1, PULL_LOW)
-#define GPIO72_CI_DD_0		MFP_CFG_LPM(GPIO72, AF1, PULL_LOW)
-#define GPIO73_CI_HSYNC		MFP_CFG_LPM(GPIO73, AF1, PULL_LOW)
-#define GPIO74_CI_VSYNC		MFP_CFG_LPM(GPIO74, AF1, PULL_LOW)
-#define GPIO75_CI_MCLK		MFP_CFG_LPM(GPIO75, AF1, PULL_LOW)
-#define GPIO76_CI_PCLK		MFP_CFG_LPM(GPIO76, AF1, PULL_LOW)
-
-/* KEYPAD */
-#define GPIO4_KP_DKIN_4		MFP_CFG_LPM(GPIO4, AF3, FLOAT)
-#define GPIO5_KP_DKIN_5		MFP_CFG_LPM(GPIO5, AF3, FLOAT)
-#define GPIO6_KP_DKIN_6		MFP_CFG_LPM(GPIO6, AF3, FLOAT)
-#define GPIO7_KP_DKIN_7		MFP_CFG_LPM(GPIO7, AF3, FLOAT)
-#define GPIO8_KP_DKIN_4		MFP_CFG_LPM(GPIO8, AF3, FLOAT)
-#define GPIO9_KP_DKIN_5		MFP_CFG_LPM(GPIO9, AF3, FLOAT)
-#define GPIO10_KP_DKIN_6	MFP_CFG_LPM(GPIO10, AF3, FLOAT)
-#define GPIO11_KP_DKIN_7	MFP_CFG_LPM(GPIO11, AF3, FLOAT)
-
-#define GPIO12_KP_DKIN_0	MFP_CFG_LPM(GPIO12, AF2, FLOAT)
-#define GPIO13_KP_DKIN_1	MFP_CFG_LPM(GPIO13, AF2, FLOAT)
-#define GPIO14_KP_DKIN_2	MFP_CFG_LPM(GPIO14, AF2, FLOAT)
-#define GPIO15_KP_DKIN_3	MFP_CFG_LPM(GPIO15, AF2, FLOAT)
-
-#define GPIO41_KP_DKIN_0	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
-#define GPIO42_KP_DKIN_1	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
-#define GPIO43_KP_DKIN_2	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
-#define GPIO44_KP_DKIN_3	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
-#define GPIO41_KP_DKIN_4	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
-#define GPIO42_KP_DKIN_5	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
-
-#define GPIO0_KP_MKIN_0		MFP_CFG_LPM(GPIO0, AF1, FLOAT)
-#define GPIO2_KP_MKIN_1		MFP_CFG_LPM(GPIO2, AF1, FLOAT)
-#define GPIO4_KP_MKIN_2		MFP_CFG_LPM(GPIO4, AF1, FLOAT)
-#define GPIO6_KP_MKIN_3		MFP_CFG_LPM(GPIO6, AF1, FLOAT)
-#define GPIO8_KP_MKIN_4		MFP_CFG_LPM(GPIO8, AF1, FLOAT)
-#define GPIO10_KP_MKIN_5	MFP_CFG_LPM(GPIO10, AF1, FLOAT)
-#define GPIO12_KP_MKIN_6	MFP_CFG_LPM(GPIO12, AF1, FLOAT)
-#define GPIO14_KP_MKIN_7	MFP_CFG(GPIO14, AF1)
-#define GPIO35_KP_MKIN_5	MFP_CFG(GPIO35, AF4)
-
-#define GPIO1_KP_MKOUT_0	MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH)
-#define GPIO3_KP_MKOUT_1	MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH)
-#define GPIO5_KP_MKOUT_2	MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH)
-#define GPIO7_KP_MKOUT_3	MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
-#define GPIO9_KP_MKOUT_4	MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH)
-#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH)
-#define GPIO13_KP_MKOUT_6	MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH)
-#define GPIO15_KP_MKOUT_7	MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH)
-#define GPIO36_KP_MKOUT_5	MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH)
-
-/* LCD */
-#define GPIO17_LCD_FCLK_RD	MFP_CFG(GPIO17, AF1)
-#define GPIO18_LCD_LCLK_A0	MFP_CFG(GPIO18, AF1)
-#define GPIO19_LCD_PCLK_WR	MFP_CFG(GPIO19, AF1)
-#define GPIO20_LCD_BIAS		MFP_CFG(GPIO20, AF1)
-#define GPIO21_LCD_CS		MFP_CFG(GPIO21, AF1)
-#define GPIO22_LCD_CS2		MFP_CFG(GPIO22, AF2)
-#define GPIO22_LCD_VSYNC	MFP_CFG(GPIO22, AF1)
-#define GPIO23_LCD_DD0		MFP_CFG(GPIO23, AF1)
-#define GPIO24_LCD_DD1		MFP_CFG(GPIO24, AF1)
-#define GPIO25_LCD_DD2		MFP_CFG(GPIO25, AF1)
-#define GPIO26_LCD_DD3		MFP_CFG(GPIO26, AF1)
-#define GPIO27_LCD_DD4		MFP_CFG(GPIO27, AF1)
-#define GPIO28_LCD_DD5		MFP_CFG(GPIO28, AF1)
-#define GPIO29_LCD_DD6		MFP_CFG(GPIO29, AF1)
-#define GPIO30_LCD_DD7		MFP_CFG(GPIO30, AF1)
-#define GPIO31_LCD_DD8		MFP_CFG(GPIO31, AF1)
-#define GPIO32_LCD_DD9		MFP_CFG(GPIO32, AF1)
-#define GPIO33_LCD_DD10		MFP_CFG(GPIO33, AF1)
-#define GPIO34_LCD_DD11		MFP_CFG(GPIO34, AF1)
-#define GPIO35_LCD_DD12		MFP_CFG(GPIO35, AF1)
-#define GPIO36_LCD_DD13		MFP_CFG(GPIO36, AF1)
-#define GPIO37_LCD_DD14		MFP_CFG(GPIO37, AF1)
-#define GPIO38_LCD_DD15		MFP_CFG(GPIO38, AF1)
-#define GPIO39_LCD_DD16		MFP_CFG(GPIO39, AF1)
-#define GPIO40_LCD_DD17		MFP_CFG(GPIO40, AF1)
-#define GPIO41_LCD_CS2		MFP_CFG(GPIO41, AF3)
-#define GPIO42_LCD_VSYNC2	MFP_CFG(GPIO42, AF3)
-#define GPIO44_LCD_DD7		MFP_CFG(GPIO44, AF1)
-
-/* Mini-LCD */
-#define GPIO17_MLCD_FCLK	MFP_CFG(GPIO17, AF3)
-#define GPIO18_MLCD_LCLK	MFP_CFG(GPIO18, AF3)
-#define GPIO19_MLCD_PCLK	MFP_CFG(GPIO19, AF3)
-#define GPIO20_MLCD_BIAS	MFP_CFG(GPIO20, AF3)
-#define GPIO23_MLCD_DD0		MFP_CFG(GPIO23, AF3)
-#define GPIO24_MLCD_DD1		MFP_CFG(GPIO24, AF3)
-#define GPIO25_MLCD_DD2		MFP_CFG(GPIO25, AF3)
-#define GPIO26_MLCD_DD3		MFP_CFG(GPIO26, AF3)
-#define GPIO27_MLCD_DD4		MFP_CFG(GPIO27, AF3)
-#define GPIO28_MLCD_DD5		MFP_CFG(GPIO28, AF3)
-#define GPIO29_MLCD_DD6		MFP_CFG(GPIO29, AF3)
-#define GPIO30_MLCD_DD7		MFP_CFG(GPIO30, AF3)
-#define GPIO31_MLCD_DD8		MFP_CFG(GPIO31, AF3)
-#define GPIO32_MLCD_DD9		MFP_CFG(GPIO32, AF3)
-#define GPIO33_MLCD_DD10	MFP_CFG(GPIO33, AF3)
-#define GPIO34_MLCD_DD11	MFP_CFG(GPIO34, AF3)
-#define GPIO35_MLCD_DD12	MFP_CFG(GPIO35, AF3)
-#define GPIO36_MLCD_DD13	MFP_CFG(GPIO36, AF3)
-#define GPIO37_MLCD_DD14	MFP_CFG(GPIO37, AF3)
-#define GPIO38_MLCD_DD15	MFP_CFG(GPIO38, AF3)
-#define GPIO44_MLCD_DD7		MFP_CFG(GPIO44, AF5)
-
-/* MMC1 */
-#define GPIO10_MMC1_DAT3	MFP_CFG(GPIO10, AF4)
-#define GPIO11_MMC1_DAT2	MFP_CFG(GPIO11, AF4)
-#define GPIO12_MMC1_DAT1	MFP_CFG(GPIO12, AF4)
-#define GPIO13_MMC1_DAT0	MFP_CFG(GPIO13, AF4)
-#define GPIO14_MMC1_CMD		MFP_CFG(GPIO14, AF4)
-#define GPIO15_MMC1_CLK		MFP_CFG(GPIO15, AF4)
-#define GPIO55_MMC1_CMD		MFP_CFG(GPIO55, AF3)
-#define GPIO56_MMC1_CLK		MFP_CFG(GPIO56, AF3)
-#define GPIO57_MMC1_DAT0	MFP_CFG(GPIO57, AF3)
-#define GPIO58_MMC1_DAT1	MFP_CFG(GPIO58, AF3)
-#define GPIO59_MMC1_DAT2	MFP_CFG(GPIO59, AF3)
-#define GPIO60_MMC1_DAT3	MFP_CFG(GPIO60, AF3)
-
-#define DF_ADDR0_MMC1_CLK	MFP_CFG(DF_ADDR0, AF2)
-#define DF_ADDR1_MMC1_CMD	MFP_CFG(DF_ADDR1, AF2)
-#define DF_ADDR2_MMC1_DAT0	MFP_CFG(DF_ADDR2, AF2)
-#define DF_ADDR3_MMC1_DAT1	MFP_CFG(DF_ADDR3, AF3)
-#define nXCVREN_MMC1_DAT2	MFP_CFG(nXCVREN, AF2)
-
-/* MMC2 */
-#define GPIO31_MMC2_CMD		MFP_CFG(GPIO31, AF7)
-#define GPIO32_MMC2_CLK		MFP_CFG(GPIO32, AF7)
-#define GPIO33_MMC2_DAT0	MFP_CFG(GPIO33, AF7)
-#define GPIO34_MMC2_DAT1	MFP_CFG(GPIO34, AF7)
-#define GPIO35_MMC2_DAT2	MFP_CFG(GPIO35, AF7)
-#define GPIO36_MMC2_DAT3	MFP_CFG(GPIO36, AF7)
-
-#define GPIO101_MMC2_DAT3	MFP_CFG(GPIO101, AF1)
-#define GPIO102_MMC2_DAT2	MFP_CFG(GPIO102, AF1)
-#define GPIO103_MMC2_DAT1	MFP_CFG(GPIO103, AF1)
-#define GPIO104_MMC2_DAT0	MFP_CFG(GPIO104, AF1)
-#define GPIO105_MMC2_CMD	MFP_CFG(GPIO105, AF1)
-#define GPIO106_MMC2_CLK	MFP_CFG(GPIO106, AF1)
-
-#define DF_IO10_MMC2_DAT3	MFP_CFG(DF_IO10, AF3)
-#define DF_IO11_MMC2_DAT2	MFP_CFG(DF_IO11, AF3)
-#define DF_IO12_MMC2_DAT1	MFP_CFG(DF_IO12, AF3)
-#define DF_IO13_MMC2_DAT0	MFP_CFG(DF_IO13, AF3)
-#define DF_IO14_MMC2_CLK	MFP_CFG(DF_IO14, AF3)
-#define DF_IO15_MMC2_CMD	MFP_CFG(DF_IO15, AF3)
-
-/* BSSP1 */
-#define GPIO12_BSSP1_CLK	MFP_CFG(GPIO12, AF3)
-#define GPIO13_BSSP1_FRM	MFP_CFG(GPIO13, AF3)
-#define GPIO14_BSSP1_RXD	MFP_CFG(GPIO14, AF3)
-#define GPIO15_BSSP1_TXD	MFP_CFG(GPIO15, AF3)
-#define GPIO97_BSSP1_CLK	MFP_CFG(GPIO97, AF5)
-#define GPIO98_BSSP1_FRM	MFP_CFG(GPIO98, AF5)
-
-/* BSSP2 */
-#define GPIO84_BSSP2_SDATA_IN	MFP_CFG(GPIO84, AF1)
-#define GPIO85_BSSP2_BITCLK	MFP_CFG(GPIO85, AF1)
-#define GPIO86_BSSP2_SYSCLK	MFP_CFG(GPIO86, AF1)
-#define GPIO87_BSSP2_SYNC	MFP_CFG(GPIO87, AF1)
-#define GPIO88_BSSP2_DATA_OUT	MFP_CFG(GPIO88, AF1)
-#define GPIO86_BSSP2_SDATA_IN	MFP_CFG(GPIO86, AF4)
-
-/* BSSP3 */
-#define GPIO79_BSSP3_CLK	MFP_CFG(GPIO79, AF1)
-#define GPIO80_BSSP3_FRM	MFP_CFG(GPIO80, AF1)
-#define GPIO81_BSSP3_TXD	MFP_CFG(GPIO81, AF1)
-#define GPIO82_BSSP3_RXD	MFP_CFG(GPIO82, AF1)
-#define GPIO83_BSSP3_SYSCLK	MFP_CFG(GPIO83, AF1)
-
-/* BSSP4 */
-#define GPIO43_BSSP4_CLK	MFP_CFG(GPIO43, AF4)
-#define GPIO44_BSSP4_FRM	MFP_CFG(GPIO44, AF4)
-#define GPIO45_BSSP4_TXD	MFP_CFG(GPIO45, AF4)
-#define GPIO46_BSSP4_RXD	MFP_CFG(GPIO46, AF4)
-
-#define GPIO51_BSSP4_CLK	MFP_CFG(GPIO51, AF4)
-#define GPIO52_BSSP4_FRM	MFP_CFG(GPIO52, AF4)
-#define GPIO53_BSSP4_TXD	MFP_CFG(GPIO53, AF4)
-#define GPIO54_BSSP4_RXD	MFP_CFG(GPIO54, AF4)
-
-/* GSSP1 */
-#define GPIO79_GSSP1_CLK	MFP_CFG(GPIO79, AF2)
-#define GPIO80_GSSP1_FRM	MFP_CFG(GPIO80, AF2)
-#define GPIO81_GSSP1_TXD	MFP_CFG(GPIO81, AF2)
-#define GPIO82_GSSP1_RXD	MFP_CFG(GPIO82, AF2)
-#define GPIO83_GSSP1_SYSCLK	MFP_CFG(GPIO83, AF2)
-
-#define GPIO93_GSSP1_CLK	MFP_CFG(GPIO93, AF4)
-#define GPIO94_GSSP1_FRM	MFP_CFG(GPIO94, AF4)
-#define GPIO95_GSSP1_TXD	MFP_CFG(GPIO95, AF4)
-#define GPIO96_GSSP1_RXD	MFP_CFG(GPIO96, AF4)
-
-/* GSSP2 */
-#define GPIO47_GSSP2_CLK	MFP_CFG(GPIO47, AF4)
-#define GPIO48_GSSP2_FRM	MFP_CFG(GPIO48, AF4)
-#define GPIO49_GSSP2_RXD	MFP_CFG(GPIO49, AF4)
-#define GPIO50_GSSP2_TXD	MFP_CFG(GPIO50, AF4)
-
-#define GPIO69_GSSP2_CLK	MFP_CFG(GPIO69, AF4)
-#define GPIO70_GSSP2_FRM	MFP_CFG(GPIO70, AF4)
-#define GPIO71_GSSP2_RXD	MFP_CFG(GPIO71, AF4)
-#define GPIO72_GSSP2_TXD	MFP_CFG(GPIO72, AF4)
-
-#define GPIO84_GSSP2_RXD	MFP_CFG(GPIO84, AF2)
-#define GPIO85_GSSP2_CLK	MFP_CFG(GPIO85, AF2)
-#define GPIO86_GSSP2_SYSCLK	MFP_CFG(GPIO86, AF2)
-#define GPIO87_GSSP2_FRM	MFP_CFG(GPIO87, AF2)
-#define GPIO88_GSSP2_TXD	MFP_CFG(GPIO88, AF2)
-#define GPIO86_GSSP2_RXD	MFP_CFG(GPIO86, AF5)
-
-#define GPIO103_GSSP2_CLK	MFP_CFG(GPIO103, AF2)
-#define GPIO104_GSSP2_FRM	MFP_CFG(GPIO104, AF2)
-#define GPIO105_GSSP2_RXD	MFP_CFG(GPIO105, AF2)
-#define GPIO106_GSSP2_TXD	MFP_CFG(GPIO106, AF2)
-
-/* UART1 - FFUART */
-#define GPIO47_UART1_DSR_N	MFP_CFG(GPIO47, AF1)
-#define GPIO48_UART1_DTR_N	MFP_CFG(GPIO48, AF1)
-#define GPIO49_UART1_RI		MFP_CFG(GPIO49, AF1)
-#define GPIO50_UART1_DCD	MFP_CFG(GPIO50, AF1)
-#define GPIO51_UART1_CTS	MFP_CFG(GPIO51, AF1)
-#define GPIO52_UART1_RTS	MFP_CFG(GPIO52, AF1)
-#define GPIO53_UART1_RXD	MFP_CFG(GPIO53, AF1)
-#define GPIO54_UART1_TXD	MFP_CFG(GPIO54, AF1)
-
-#define GPIO63_UART1_TXD	MFP_CFG(GPIO63, AF2)
-#define GPIO64_UART1_RXD	MFP_CFG(GPIO64, AF2)
-#define GPIO65_UART1_DSR	MFP_CFG(GPIO65, AF2)
-#define GPIO66_UART1_DTR	MFP_CFG(GPIO66, AF2)
-#define GPIO67_UART1_RI		MFP_CFG(GPIO67, AF2)
-#define GPIO68_UART1_DCD	MFP_CFG(GPIO68, AF2)
-#define GPIO69_UART1_CTS	MFP_CFG(GPIO69, AF2)
-#define GPIO70_UART1_RTS	MFP_CFG(GPIO70, AF2)
-
-#define GPIO53_UART1_TXD	MFP_CFG(GPIO53, AF2)
-#define GPIO54_UART1_RXD	MFP_CFG(GPIO54, AF2)
-
-/* UART2 - BTUART */
-#define GPIO91_UART2_RXD	MFP_CFG(GPIO91, AF1)
-#define GPIO92_UART2_TXD	MFP_CFG(GPIO92, AF1)
-#define GPIO93_UART2_CTS	MFP_CFG(GPIO93, AF1)
-#define GPIO94_UART2_RTS	MFP_CFG(GPIO94, AF1)
-
-/* UART3 - STUART */
-#define GPIO43_UART3_RTS	MFP_CFG(GPIO43, AF3)
-#define GPIO44_UART3_CTS	MFP_CFG(GPIO44, AF3)
-#define GPIO45_UART3_RXD	MFP_CFG(GPIO45, AF3)
-#define GPIO46_UART3_TXD	MFP_CFG(GPIO46, AF3)
-
-#define GPIO75_UART3_RTS	MFP_CFG(GPIO75, AF5)
-#define GPIO76_UART3_CTS	MFP_CFG(GPIO76, AF5)
-#define GPIO77_UART3_TXD	MFP_CFG(GPIO77, AF5)
-#define GPIO78_UART3_RXD	MFP_CFG(GPIO78, AF5)
-
-/* DFI */
-#define DF_IO0_DF_IO0		MFP_CFG(DF_IO0, AF2)
-#define DF_IO1_DF_IO1		MFP_CFG(DF_IO1, AF2)
-#define DF_IO2_DF_IO2		MFP_CFG(DF_IO2, AF2)
-#define DF_IO3_DF_IO3		MFP_CFG(DF_IO3, AF2)
-#define DF_IO4_DF_IO4		MFP_CFG(DF_IO4, AF2)
-#define DF_IO5_DF_IO5		MFP_CFG(DF_IO5, AF2)
-#define DF_IO6_DF_IO6		MFP_CFG(DF_IO6, AF2)
-#define DF_IO7_DF_IO7		MFP_CFG(DF_IO7, AF2)
-#define DF_IO8_DF_IO8		MFP_CFG(DF_IO8, AF2)
-#define DF_IO9_DF_IO9		MFP_CFG(DF_IO9, AF2)
-#define DF_IO10_DF_IO10		MFP_CFG(DF_IO10, AF2)
-#define DF_IO11_DF_IO11		MFP_CFG(DF_IO11, AF2)
-#define DF_IO12_DF_IO12		MFP_CFG(DF_IO12, AF2)
-#define DF_IO13_DF_IO13		MFP_CFG(DF_IO13, AF2)
-#define DF_IO14_DF_IO14		MFP_CFG(DF_IO14, AF2)
-#define DF_IO15_DF_IO15		MFP_CFG(DF_IO15, AF2)
-#define DF_nADV1_ALE_DF_nADV1	MFP_CFG(DF_nADV1_ALE, AF2)
-#define DF_nADV2_ALE_DF_nADV2	MFP_CFG(DF_nADV2_ALE, AF2)
-#define DF_nCS0_DF_nCS0		MFP_CFG(DF_nCS0, AF2)
-#define DF_nCS1_DF_nCS1		MFP_CFG(DF_nCS1, AF2)
-#define DF_nRE_nOE_DF_nOE	MFP_CFG(DF_nRE_nOE, AF2)
-#define DF_nWE_DF_nWE		MFP_CFG(DF_nWE, AF2)
-
-/* DFI - NAND */
-#define DF_CLE_nOE_ND_CLE	MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH)
-#define DF_INT_RnB_ND_INT_RnB	MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW)
-#define DF_IO0_ND_IO0		MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW)
-#define DF_IO1_ND_IO1		MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW)
-#define DF_IO2_ND_IO2		MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW)
-#define DF_IO3_ND_IO3		MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW)
-#define DF_IO4_ND_IO4		MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW)
-#define DF_IO5_ND_IO5		MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW)
-#define DF_IO6_ND_IO6		MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW)
-#define DF_IO7_ND_IO7		MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW)
-#define DF_IO8_ND_IO8		MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW)
-#define DF_IO9_ND_IO9		MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW)
-#define DF_IO10_ND_IO10		MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW)
-#define DF_IO11_ND_IO11		MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW)
-#define DF_IO12_ND_IO12		MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW)
-#define DF_IO13_ND_IO13		MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW)
-#define DF_IO14_ND_IO14		MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW)
-#define DF_IO15_ND_IO15		MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW)
-#define DF_nADV1_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH)
-#define DF_nADV2_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH)
-#define	DF_nADV2_ALE_nCS3	MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH)
-#define DF_nCS0_ND_nCS0		MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH)
-#define DF_nCS1_ND_nCS1		MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH)
-#define DF_nRE_nOE_ND_nRE	MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH)
-#define DF_nWE_ND_nWE		MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH)
-
-/* PWM */
-#define GPIO41_PWM0		MFP_CFG_LPM(GPIO41, AF1, PULL_LOW)
-#define GPIO42_PWM1		MFP_CFG_LPM(GPIO42, AF1, PULL_LOW)
-#define GPIO43_PWM3		MFP_CFG_LPM(GPIO43, AF1, PULL_LOW)
-#define GPIO20_PWM0		MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
-#define GPIO21_PWM2		MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
-#define GPIO22_PWM3		MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
-#define GPIO32_PWM0		MFP_CFG_LPM(GPIO32, AF4, PULL_LOW)
-
-/* CIR */
-#define GPIO46_CIR_OUT		MFP_CFG(GPIO46, AF1)
-#define GPIO77_CIR_OUT		MFP_CFG(GPIO77, AF3)
-
-/* USB P2 */
-#define GPIO0_USB_P2_7		MFP_CFG(GPIO0, AF3)
-#define GPIO15_USB_P2_7		MFP_CFG(GPIO15, AF5)
-#define GPIO16_USB_P2_7		MFP_CFG(GPIO16, AF2)
-#define GPIO48_USB_P2_7		MFP_CFG(GPIO48, AF7)
-#define GPIO49_USB_P2_7		MFP_CFG(GPIO49, AF6)
-#define DF_IO9_USB_P2_7		MFP_CFG(DF_IO9, AF3)
-
-#define GPIO48_USB_P2_8		MFP_CFG(GPIO48, AF2)
-#define GPIO50_USB_P2_7		MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT)
-#define GPIO51_USB_P2_5		MFP_CFG(GPIO51, AF2)
-#define GPIO47_USB_P2_4		MFP_CFG(GPIO47, AF2)
-#define GPIO53_USB_P2_3		MFP_CFG(GPIO53, AF2)
-#define GPIO54_USB_P2_6		MFP_CFG(GPIO54, AF2)
-#define GPIO49_USB_P2_2		MFP_CFG(GPIO49, AF2)
-#define GPIO52_USB_P2_1		MFP_CFG(GPIO52, AF2)
-
-#define GPIO63_USB_P2_8		MFP_CFG(GPIO63, AF3)
-#define GPIO64_USB_P2_7		MFP_CFG(GPIO64, AF3)
-#define GPIO65_USB_P2_6		MFP_CFG(GPIO65, AF3)
-#define GPIO66_USG_P2_5		MFP_CFG(GPIO66, AF3)
-#define GPIO67_USB_P2_4		MFP_CFG(GPIO67, AF3)
-#define GPIO68_USB_P2_3		MFP_CFG(GPIO68, AF3)
-#define GPIO69_USB_P2_2		MFP_CFG(GPIO69, AF3)
-#define GPIO70_USB_P2_1		MFP_CFG(GPIO70, AF3)
-
-/* ULPI */
-#define GPIO31_USB_ULPI_D0	MFP_CFG(GPIO31, AF4)
-#define GPIO30_USB_ULPI_D1	MFP_CFG(GPIO30, AF7)
-#define GPIO33_USB_ULPI_D2	MFP_CFG(GPIO33, AF5)
-#define GPIO34_USB_ULPI_D3	MFP_CFG(GPIO34, AF5)
-#define GPIO35_USB_ULPI_D4	MFP_CFG(GPIO35, AF5)
-#define GPIO36_USB_ULPI_D5	MFP_CFG(GPIO36, AF5)
-#define GPIO41_USB_ULPI_D6	MFP_CFG(GPIO41, AF5)
-#define GPIO42_USB_ULPI_D7	MFP_CFG(GPIO42, AF5)
-#define GPIO37_USB_ULPI_DIR	MFP_CFG(GPIO37, AF4)
-#define GPIO38_USB_ULPI_CLK	MFP_CFG(GPIO38, AF4)
-#define GPIO39_USB_ULPI_STP	MFP_CFG(GPIO39, AF4)
-#define GPIO40_USB_ULPI_NXT	MFP_CFG(GPIO40, AF4)
-
-#define GPIO3_CLK26MOUTDMD	MFP_CFG(GPIO3, AF3)
-#define GPIO40_CLK26MOUTDMD	MFP_CFG(GPIO40, AF7)
-#define GPIO94_CLK26MOUTDMD	MFP_CFG(GPIO94, AF5)
-#define GPIO104_CLK26MOUTDMD	MFP_CFG(GPIO104, AF4)
-#define DF_ADDR1_CLK26MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
-#define DF_ADDR3_CLK26MOUTDMD	MFP_CFG(DF_ADDR3, AF3)
-
-#define GPIO14_CLK26MOUT	MFP_CFG(GPIO14, AF5)
-#define GPIO38_CLK26MOUT	MFP_CFG(GPIO38, AF7)
-#define GPIO92_CLK26MOUT	MFP_CFG(GPIO92, AF5)
-#define GPIO105_CLK26MOUT	MFP_CFG(GPIO105, AF4)
-
-#define GPIO2_CLK13MOUTDMD	MFP_CFG(GPIO2, AF3)
-#define GPIO39_CLK13MOUTDMD	MFP_CFG(GPIO39, AF7)
-#define GPIO50_CLK13MOUTDMD	MFP_CFG(GPIO50, AF3)
-#define GPIO93_CLK13MOUTDMD	MFP_CFG(GPIO93, AF5)
-#define GPIO103_CLK13MOUTDMD	MFP_CFG(GPIO103, AF4)
-#define DF_ADDR2_CLK13MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
-
-/* 1 wire */
-#define GPIO95_OW_DQ_IN		MFP_CFG(GPIO95, AF5)
-
-#endif /* __ASM_ARCH_MFP_PXA9xx_H */
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
deleted file mode 100644
index d08f962ffb04..000000000000
--- a/arch/arm/mach-pxa/mioa701.c
+++ /dev/null
@@ -1,784 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Handles the Mitac Mio A701 Board
- *
- * Copyright (C) 2008 Robert Jarzmik
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/gpio_keys.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/rtc.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/pda_power.h>
-#include <linux/power_supply.h>
-#include <linux/wm97xx.h>
-#include <linux/mtd/physmap.h>
-#include <linux/reboot.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/max1586.h>
-#include <linux/slab.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa27x.h"
-#include "regs-rtc.h"
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include "udc.h"
-#include "pxa27x-udc.h"
-#include <linux/platform_data/media/camera-pxa.h>
-#include <linux/platform_data/asoc-pxa.h>
-#include "smemc.h"
-
-#include "mioa701.h"
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long mioa701_pin_config[] = {
-	/* Mio global */
-	MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
-	MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
-	MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
-	MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
-
-	/* Backlight PWM 0 */
-	GPIO16_PWM0_OUT,
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
-	MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
-	MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
-
-	/* USB */
-	MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
-	MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* QCI */
-	GPIO12_CIF_DD_7,
-	GPIO17_CIF_DD_6,
-	GPIO50_CIF_DD_3,
-	GPIO51_CIF_DD_2,
-	GPIO52_CIF_DD_4,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO55_CIF_DD_1,
-	GPIO81_CIF_DD_0,
-	GPIO82_CIF_DD_5,
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-	MIO_CFG_OUT(GPIO56_MT9M111_nOE, AF0, DRIVE_LOW),
-
-	/* Bluetooth */
-	MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
-	GPIO44_BTUART_CTS,
-	GPIO42_BTUART_RXD,
-	GPIO45_BTUART_RTS,
-	GPIO43_BTUART_TXD,
-	MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
-
-	/* GPS */
-	MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* GSM */
-	MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
-	MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
-	MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* Sound */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
-
-	/* Leds */
-	MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
-
-	/* Keyboard */
-	MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
-	MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
-	MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
-	GPIO100_KP_MKIN_0,
-	GPIO101_KP_MKIN_1,
-	GPIO102_KP_MKIN_2,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* Unknown */
-	MFP_CFG_IN(GPIO20, AF0),
-	MFP_CFG_IN(GPIO21, AF0),
-	MFP_CFG_IN(GPIO33, AF0),
-	MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
-	MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
-	MFP_CFG_IN(GPIO96, AF0),
-	MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
-};
-
-static struct pwm_lookup mioa701_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 4000 * 1024,
-		   PWM_POLARITY_NORMAL),
-};
-
-/* LCD Screen and Backlight */
-static struct platform_pwm_backlight_data mioa701_backlight_data = {
-	.max_brightness	= 100,
-	.dft_brightness	= 50,
-};
-
-/*
- * LTM0305A776C LCD panel timings
- *
- * see:
- *  - the LTM0305A776C datasheet,
- *  - and the PXA27x Programmers' manual
- */
-static struct pxafb_mode_info mioa701_ltm0305a776c = {
-	.pixclock		= 220000,	/* CLK=4.545 MHz */
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 4,
-	.vsync_len		= 2,
-	.left_margin		= 6,
-	.right_margin		= 4,
-	.upper_margin		= 5,
-	.lower_margin		= 3,
-};
-
-static void mioa701_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	gpio_set_value(GPIO87_LCD_POWER, on);
-}
-
-static struct pxafb_mach_info mioa701_pxafb_info = {
-	.modes			= &mioa701_ltm0305a776c,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= mioa701_lcd_power,
-};
-
-/*
- * Keyboard configuration
- */
-static const unsigned int mioa701_matrix_keys[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_MEDIA),
-	KEY(1, 0, KEY_DOWN),
-	KEY(1, 1, KEY_ENTER),
-	KEY(1, 2, KEY_CONNECT),	/* GPS key */
-	KEY(2, 0, KEY_LEFT),
-	KEY(2, 1, KEY_PHONE),	/* Phone Green key */
-	KEY(2, 2, KEY_CAMERA)	/* Camera key */
-};
-
-static struct matrix_keymap_data mioa701_matrix_keymap_data = {
-	.keymap			= mioa701_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(mioa701_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data mioa701_keypad_info = {
-	.matrix_key_rows = 3,
-	.matrix_key_cols = 3,
-	.matrix_keymap_data = &mioa701_matrix_keymap_data,
-};
-
-/*
- * GPIO Key Configuration
- */
-#define MIO_KEY(key, _gpio, _desc, _wakeup) \
-	{ .code = (key), .gpio = (_gpio), .active_low = 0, \
-	.desc = (_desc), .type = EV_KEY, .wakeup = (_wakeup) }
-static struct gpio_keys_button mioa701_button_table[] = {
-	MIO_KEY(KEY_EXIT, GPIO0_KEY_POWER, "Power button", 1),
-	MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0),
-	MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0),
-	MIO_KEY(KEY_HP, GPIO12_HPJACK_INSERT, "HP jack detect", 0)
-};
-
-static struct gpio_keys_platform_data mioa701_gpio_keys_data = {
-	.buttons  = mioa701_button_table,
-	.nbuttons = ARRAY_SIZE(mioa701_button_table),
-};
-
-/*
- * Leds and vibrator
- */
-#define ONE_LED(_gpio, _name) \
-{ .gpio = (_gpio), .name = (_name), .active_low = true }
-static struct gpio_led gpio_leds[] = {
-	ONE_LED(GPIO10_LED_nCharging, "mioa701:charging"),
-	ONE_LED(GPIO97_LED_nBlue, "mioa701:blue"),
-	ONE_LED(GPIO98_LED_nOrange, "mioa701:orange"),
-	ONE_LED(GPIO82_LED_nVibra, "mioa701:vibra"),
-	ONE_LED(GPIO115_LED_nKeyboard, "mioa701:keyboard")
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds = gpio_leds,
-	.num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-/*
- * GSM Sagem XS200 chip
- *
- * GSM handling was purged from kernel. For history, this is the way to go :
- *   - init : GPIO24_GSM_MOD_RESET_CMD = 0, GPIO114_GSM_nMOD_DTE_UART_STATE = 1
- *            GPIO88_GSM_nMOD_ON_CMD = 1, GPIO90_GSM_nMOD_OFF_CMD = 1
- *   - reset : GPIO24_GSM_MOD_RESET_CMD = 1, msleep(100),
- *             GPIO24_GSM_MOD_RESET_CMD = 0
- *   - turn on  : GPIO88_GSM_nMOD_ON_CMD = 0, msleep(1000),
- *                GPIO88_GSM_nMOD_ON_CMD = 1
- *   - turn off : GPIO90_GSM_nMOD_OFF_CMD = 0, msleep(1000),
- *                GPIO90_GSM_nMOD_OFF_CMD = 1
- */
-static int is_gsm_on(void)
-{
-	int is_on;
-
-	is_on = !!gpio_get_value(GPIO25_GSM_MOD_ON_STATE);
-	return is_on;
-}
-
-irqreturn_t gsm_on_irq(int irq, void *p)
-{
-	printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n",
-	       is_gsm_on() ? "on" : "off");
-	return IRQ_HANDLED;
-}
-
-static struct gpio gsm_gpios[] = {
-	{ GPIO25_GSM_MOD_ON_STATE, GPIOF_IN, "GSM state" },
-	{ GPIO113_GSM_EVENT, GPIOF_IN, "GSM event" },
-};
-
-static int __init gsm_init(void)
-{
-	int rc;
-
-	rc = gpio_request_array(ARRAY_AND_SIZE(gsm_gpios));
-	if (rc)
-		goto err_gpio;
-	rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
-			 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			 "GSM XS200 Power Irq", NULL);
-	if (rc)
-		goto err_irq;
-
-	gpio_set_wake(GPIO113_GSM_EVENT, 1);
-	return 0;
-
-err_irq:
-	printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n");
-	gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
-err_gpio:
-	printk(KERN_ERR "Mioa701: gsm not available\n");
-	return rc;
-}
-
-static void gsm_exit(void)
-{
-	free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
-	gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
-}
-
-/*
- * Bluetooth BRF6150 chip
- *
- * BT handling was purged from kernel. For history, this is the way to go :
- * - turn on  : GPIO83_BT_ON = 1
- * - turn off : GPIO83_BT_ON = 0
- */
-
-/*
- * GPS Sirf Star III chip
- *
- * GPS handling was purged from kernel. For history, this is the way to go :
- * - init : GPIO23_GPS_UNKNOWN1 = 1, GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
- *          GPIO106_GPS_UNKNOWN2 = 0, GPIO107_GPS_UNKNOWN3 = 0
- * - turn on  : GPIO27_GPS_RESET = 1, GPIO26_GPS_ON = 1
- * - turn off : GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
- */
-
-/*
- * USB UDC
- */
-static int is_usb_connected(void)
-{
-	return !gpio_get_value(GPIO13_nUSB_DETECT);
-}
-
-static struct pxa2xx_udc_mach_info mioa701_udc_info = {
-	.udc_is_connected = is_usb_connected,
-	.gpio_pullup	  = GPIO22_USB_ENABLE,
-};
-
-static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO13_nUSB_DETECT,
-			    "vbus", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/*
- * SDIO/MMC Card controller
- */
-/**
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-static struct pxamci_platform_data mioa701_mci_info = {
-	.detect_delay_ms	= 250,
-	.ocr_mask 		= MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table mioa701_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on GPIO 15 */
-		GPIO_LOOKUP("gpio-pxa", GPIO15_SDIO_INSERT,
-			    "cd", GPIO_ACTIVE_LOW),
-		/* Write protect on GPIO 78 */
-		GPIO_LOOKUP("gpio-pxa", GPIO78_SDIO_RO,
-			    "wp", GPIO_ACTIVE_LOW),
-		/* Power on GPIO 91 */
-		GPIO_LOOKUP("gpio-pxa", GPIO91_SDIO_EN,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* FlashRAM */
-static struct resource docg3_resource = {
-	.start = PXA_CS0_PHYS,
-	.end   = PXA_CS0_PHYS + SZ_8K - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device docg3 = {
-	.name	       = "docg3",
-	.id	       = -1,
-	.resource      = &docg3_resource,
-	.num_resources = 1,
-	.dev = {
-		.platform_data = NULL,
-	},
-};
-
-/*
- * Suspend/Resume bootstrap management
- *
- * MIO A701 reboot sequence is highly ROM dependent. From the one dissassembled,
- * this sequence is as follows :
- *   - disables interrupts
- *   - initialize SDRAM (self refresh RAM into active RAM)
- *   - initialize GPIOs (depends on value at 0xa020b020)
- *   - initialize coprossessors
- *   - if edge detect on PWR_SCL(GPIO3), then proceed to cold start
- *   - or if value at 0xa020b000 not equal to 0x0f0f0f0f, proceed to cold start
- *   - else do a resume, ie. jump to addr 0xa0100000
- */
-#define RESUME_ENABLE_ADDR	0xa020b000
-#define RESUME_ENABLE_VAL	0x0f0f0f0f
-#define RESUME_BT_ADDR		0xa020b020
-#define RESUME_UNKNOWN_ADDR	0xa020b024
-#define RESUME_VECTOR_ADDR	0xa0100000
-#define BOOTSTRAP_WORDS		mioa701_bootstrap_lg/4
-
-static u32 *save_buffer;
-
-static void install_bootstrap(void)
-{
-	int i;
-	u32 *rom_bootstrap  = phys_to_virt(RESUME_VECTOR_ADDR);
-	u32 *src = &mioa701_bootstrap;
-
-	for (i = 0; i < BOOTSTRAP_WORDS; i++)
-		rom_bootstrap[i] = src[i];
-}
-
-
-static int mioa701_sys_suspend(void)
-{
-	int i = 0, is_bt_on;
-	u32 *mem_resume_vector	= phys_to_virt(RESUME_VECTOR_ADDR);
-	u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
-	u32 *mem_resume_bt	= phys_to_virt(RESUME_BT_ADDR);
-	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
-
-	/* Devices prepare suspend */
-	is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
-	pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
-			   is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
-
-	for (i = 0; i < BOOTSTRAP_WORDS; i++)
-		save_buffer[i] = mem_resume_vector[i];
-	save_buffer[i++] = *mem_resume_enabler;
-	save_buffer[i++] = *mem_resume_bt;
-	save_buffer[i++] = *mem_resume_unknown;
-
-	*mem_resume_enabler = RESUME_ENABLE_VAL;
-	*mem_resume_bt	    = is_bt_on;
-
-	install_bootstrap();
-	return 0;
-}
-
-static void mioa701_sys_resume(void)
-{
-	int i = 0;
-	u32 *mem_resume_vector	= phys_to_virt(RESUME_VECTOR_ADDR);
-	u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
-	u32 *mem_resume_bt	= phys_to_virt(RESUME_BT_ADDR);
-	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
-
-	for (i = 0; i < BOOTSTRAP_WORDS; i++)
-		mem_resume_vector[i] = save_buffer[i];
-	*mem_resume_enabler = save_buffer[i++];
-	*mem_resume_bt	    = save_buffer[i++];
-	*mem_resume_unknown = save_buffer[i++];
-}
-
-static struct syscore_ops mioa701_syscore_ops = {
-	.suspend	= mioa701_sys_suspend,
-	.resume		= mioa701_sys_resume,
-};
-
-static int __init bootstrap_init(void)
-{
-	int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3);
-
-	register_syscore_ops(&mioa701_syscore_ops);
-
-	save_buffer = kmalloc(save_size, GFP_KERNEL);
-	if (!save_buffer)
-		return -ENOMEM;
-	printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n",
-	       save_size);
-	return 0;
-}
-
-static void bootstrap_exit(void)
-{
-	kfree(save_buffer);
-	unregister_syscore_ops(&mioa701_syscore_ops);
-
-	printk(KERN_CRIT "Unregistering mioa701 suspend will hang next"
-	       "resume !!!\n");
-}
-
-/*
- * Power Supply
- */
-static char *supplicants[] = {
-	"mioa701_battery"
-};
-
-static int is_ac_connected(void)
-{
-	return gpio_get_value(GPIO96_AC_DETECT);
-}
-
-static void mioa701_set_charge(int flags)
-{
-	gpio_set_value(GPIO9_CHARGE_EN, (flags == PDA_POWER_CHARGE_USB));
-}
-
-static struct pda_power_pdata power_pdata = {
-	.is_ac_online	= is_ac_connected,
-	.is_usb_online	= is_usb_connected,
-	.set_charge = mioa701_set_charge,
-	.supplied_to = supplicants,
-	.num_supplicants = ARRAY_SIZE(supplicants),
-};
-
-static struct resource power_resources[] = {
-	[0] = {
-		.name	= "ac",
-		.start	= PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
-		.end	= PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		IORESOURCE_IRQ_LOWEDGE,
-	},
-	[1] = {
-		.name	= "usb",
-		.start	= PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
-		.end	= PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device power_dev = {
-	.name		= "pda-power",
-	.id		= -1,
-	.resource	= power_resources,
-	.num_resources	= ARRAY_SIZE(power_resources),
-	.dev = {
-		.platform_data	= &power_pdata,
-	},
-};
-
-static struct wm97xx_batt_pdata mioa701_battery_data = {
-	.batt_aux	= WM97XX_AUX_ID1,
-	.temp_aux	= -1,
-	.min_voltage	= 0xc00,
-	.max_voltage	= 0xfc0,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LION,
-	.batt_div	= 1,
-	.batt_mult	= 1,
-	.batt_name	= "mioa701_battery",
-};
-
-static struct wm97xx_pdata mioa701_wm97xx_pdata = {
-	.batt_pdata	= &mioa701_battery_data,
-};
-
-/*
- * Voltage regulation
- */
-static struct regulator_consumer_supply max1586_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data max1586_v3_info = {
-	.constraints = {
-		.name = "vcc_core range",
-		.min_uV = 1000000,
-		.max_uV = 1705000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(max1586_consumers),
-	.consumer_supplies = max1586_consumers,
-};
-
-static struct max1586_subdev_data max1586_subdevs[] = {
-	{ .name = "vcc_core", .id = MAX1586_V3,
-	  .platform_data = &max1586_v3_info },
-};
-
-static struct max1586_platform_data max1586_info = {
-	.subdevs = max1586_subdevs,
-	.num_subdevs = ARRAY_SIZE(max1586_subdevs),
-	.v3_gain = MAX1586_GAIN_NO_R24, /* 700..1475 mV */
-};
-
-/*
- * Camera interface
- */
-struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
-	.mclk_10khz = 5000,
-	.sensor_i2c_adapter_id = 0,
-	.sensor_i2c_address = 0x5d,
-};
-
-static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data = &max1586_info,
-	},
-};
-
-/* Board I2C devices. */
-static struct i2c_board_info mioa701_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("mt9m111", 0x5d),
-	},
-};
-
-struct i2c_pxa_platform_data i2c_pdata = {
-	.fast_mode = 1,
-};
-
-static pxa2xx_audio_ops_t mioa701_ac97_info = {
-	.reset_gpio = 95,
-	.codec_pdata = { &mioa701_wm97xx_pdata, },
-};
-
-/*
- * Mio global
- */
-
-/* Devices */
-#define MIO_PARENT_DEV(var, strname, tparent, pdata)	\
-static struct platform_device var = {			\
-	.name		= strname,			\
-	.id		= -1,				\
-	.dev		= {				\
-		.platform_data = pdata,			\
-		.parent	= tparent,			\
-	},						\
-};
-#define MIO_SIMPLE_DEV(var, strname, pdata)	\
-	MIO_PARENT_DEV(var, strname, NULL, pdata)
-
-MIO_SIMPLE_DEV(mioa701_gpio_keys, "gpio-keys",	    &mioa701_gpio_keys_data)
-MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight",  &pxa27x_device_pwm0.dev,
-		&mioa701_backlight_data);
-MIO_SIMPLE_DEV(mioa701_led,	  "leds-gpio",	    &gpio_led_info)
-MIO_SIMPLE_DEV(pxa2xx_pcm,	  "pxa2xx-pcm",	    NULL)
-MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
-MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
-MIO_SIMPLE_DEV(gpio_vbus,	  "gpio-vbus",      NULL);
-
-static struct platform_device *devices[] __initdata = {
-	&mioa701_gpio_keys,
-	&mioa701_backlight,
-	&mioa701_led,
-	&pxa2xx_pcm,
-	&mioa701_sound,
-	&power_dev,
-	&docg3,
-	&gpio_vbus,
-	&mioa701_board,
-};
-
-static void mioa701_machine_exit(void);
-
-static void mioa701_poweroff(void)
-{
-	mioa701_machine_exit();
-	pxa_restart(REBOOT_SOFT, NULL);
-}
-
-static void mioa701_restart(enum reboot_mode c, const char *cmd)
-{
-	mioa701_machine_exit();
-	pxa_restart(REBOOT_SOFT, cmd);
-}
-
-static struct gpio global_gpios[] = {
-	{ GPIO9_CHARGE_EN, GPIOF_OUT_INIT_HIGH, "Charger enable" },
-	{ GPIO18_POWEROFF, GPIOF_OUT_INIT_LOW, "Power Off" },
-	{ GPIO87_LCD_POWER, GPIOF_OUT_INIT_LOW, "LCD Power" },
-	{ GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" },
-};
-
-static struct regulator_consumer_supply fixed_5v0_consumers[] = {
-	REGULATOR_SUPPLY("power", "pwm-backlight"),
-};
-
-static void __init mioa701_machine_init(void)
-{
-	int rc;
-
-	PSLR  = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */
-	PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE;
-	RTTR = 32768 - 1; /* Reset crazy WinCE value */
-	UP2OCR = UP2OCR_HXOE;
-
-	/*
-	 * Set up the flash memory : DiskOnChip G3 on first static memory bank
-	 */
-	__raw_writel(0x7ff02dd8, MSC0);
-	__raw_writel(0x0001c391, MCMEM0);
-	__raw_writel(0x0001c391, MCATT0);
-	__raw_writel(0x0001c391, MCIO0);
-
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	rc = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
-	if (rc)
-		pr_err("MioA701: Failed to request GPIOs: %d", rc);
-	bootstrap_init();
-	pxa_set_fb_info(NULL, &mioa701_pxafb_info);
-	gpiod_add_lookup_table(&mioa701_mci_gpio_table);
-	pxa_set_mci_info(&mioa701_mci_info);
-	pxa_set_keypad_info(&mioa701_keypad_info);
-	pxa_set_udc_info(&mioa701_udc_info);
-	pxa_set_ac97_info(&mioa701_ac97_info);
-	pm_power_off = mioa701_poweroff;
-	pwm_add_table(mioa701_pwm_lookup, ARRAY_SIZE(mioa701_pwm_lookup));
-	gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	gsm_init();
-
-	i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
-	i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices));
-	pxa_set_i2c_info(&i2c_pdata);
-	pxa27x_set_i2c_power_info(NULL);
-	pxa_set_camera_info(&mioa701_pxacamera_platform_data);
-
-	regulator_register_always_on(0, "fixed-5.0V", fixed_5v0_consumers,
-				     ARRAY_SIZE(fixed_5v0_consumers),
-				     5000000);
-	regulator_has_full_constraints();
-}
-
-static void mioa701_machine_exit(void)
-{
-	bootstrap_exit();
-	gsm_exit();
-}
-
-MACHINE_START(MIOA701, "MIO A701")
-	.atag_offset	= 0x100,
-	.map_io		= &pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= &pxa27x_init_irq,
-	.handle_irq	= &pxa27x_handle_irq,
-	.init_machine	= mioa701_machine_init,
-	.init_time	= pxa_timer_init,
-	.restart	= mioa701_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/mioa701.h b/arch/arm/mach-pxa/mioa701.h
deleted file mode 100644
index d94295c67460..000000000000
--- a/arch/arm/mach-pxa/mioa701.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _MIOA701_H_
-#define _MIOA701_H_
-
-#define MIO_CFG_IN(pin, af)		\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
-	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_IN))
-
-#define MIO_CFG_OUT(pin, af, state)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
-
-/* Global GPIOs */
-#define GPIO9_CHARGE_EN				9
-#define GPIO18_POWEROFF				18
-#define GPIO87_LCD_POWER			87
-#define GPIO96_AC_DETECT			96
-#define GPIO80_MAYBE_CHARGE_VDROP		80	/* Drop of 88mV */
-
-/* USB */
-#define GPIO13_nUSB_DETECT			13
-#define GPIO22_USB_ENABLE			22
-
-/* SDIO bits */
-#define GPIO78_SDIO_RO				78
-#define GPIO15_SDIO_INSERT			15
-#define GPIO91_SDIO_EN				91
-
-/* Bluetooth */
-#define GPIO14_BT_nACTIVITY			14
-#define GPIO83_BT_ON				83
-#define GPIO77_BT_UNKNOWN1			77
-#define GPIO86_BT_MAYBE_nRESET			86
-
-/* GPS */
-#define GPIO23_GPS_UNKNOWN1			23
-#define GPIO26_GPS_ON				26
-#define GPIO27_GPS_RESET			27
-#define GPIO106_GPS_UNKNOWN2			106
-#define GPIO107_GPS_UNKNOWN3			107
-
-/* GSM */
-#define GPIO24_GSM_MOD_RESET_CMD		24
-#define GPIO88_GSM_nMOD_ON_CMD			88
-#define GPIO90_GSM_nMOD_OFF_CMD			90
-#define GPIO114_GSM_nMOD_DTE_UART_STATE 	114
-#define GPIO25_GSM_MOD_ON_STATE			25
-#define GPIO113_GSM_EVENT			113
-
-/* SOUND */
-#define GPIO12_HPJACK_INSERT			12
-
-/* LEDS */
-#define GPIO10_LED_nCharging			10
-#define GPIO97_LED_nBlue			97
-#define GPIO98_LED_nOrange			98
-#define GPIO82_LED_nVibra			82
-#define GPIO115_LED_nKeyboard			115
-
-/* Keyboard */
-#define GPIO0_KEY_POWER				0
-#define GPIO93_KEY_VOLUME_UP			93
-#define GPIO94_KEY_VOLUME_DOWN			94
-
-/* Camera */
-#define GPIO56_MT9M111_nOE			56
-
-extern struct input_dev *mioa701_evdev;
-extern void mioa701_gpio_lpm_set(unsigned long mfp_pin);
-
-/* Assembler externals mioa701_bootresume.S */
-extern u32 mioa701_bootstrap;
-extern u32 mioa701_jumpaddr;
-extern u32 mioa701_bootstrap_lg;
-
-#endif /* _MIOA701_H */
diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S
deleted file mode 100644
index 4ad2fa27fc41..000000000000
--- a/arch/arm/mach-pxa/mioa701_bootresume.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* Bootloader to resume MIO A701
- *
- * 2007-1-12 Robert Jarzmik
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * Note: Yes, part of the following code is located into the .data section.
- *       This is to allow jumpaddr to be accessed with a relative load
- *       while we can't rely on any MMU translation.  We could have put
- *       sleep_save_sp in the .text section as well, but some setups might
- *       insist on it to be truly read-only.
- */
-	.data
-	.align	2
-ENTRY(mioa701_bootstrap)
-0:
-	b	1f
-ENTRY(mioa701_jumpaddr)
-	.word	0x40f00008		@ PSPR in no-MMU mode
-1:
-	mov	r0,     #0xa0000000	@ Don't suppose memory access works
-	orr	r0, r0, #0x00200000	@ even if it's supposed to
-	orr	r0, r0, #0x0000b000
-	mov	r1, #0
-	str	r1, [r0]		@ Early disable resume for next boot
-	ldr	r0, mioa701_jumpaddr	@ (Murphy's Law)
-	ldr	r0, [r0]
-	ret	r0
-2:
-
-ENTRY(mioa701_bootstrap_lg)
-	.data
-	.align	2
-	.word	2b-0b
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
deleted file mode 100644
index 8ef8ac4ab4ac..000000000000
--- a/arch/arm/mach-pxa/mp900.c
+++ /dev/null
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/mp900.c
- *
- *  Support for the NEC MobilePro900/C platform
- *
- *  Based on mach-pxa/gumstix.c
- *
- *  2007, 2008 Kristoffer Ericson <kristoffer.ericson@gmail.com>
- *  2007, 2008 Michael Petchkovsky <mkpetch@internode.on.net>
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/usb/isp116x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa25x.h"
-#include "generic.h"
-
-static void isp116x_pfm_delay(struct device *dev, int delay)
-{
-
-	/* 400MHz PXA2 = 2.5ns / instruction */
-
-	int cyc = delay / 10;
-
-	/* 4 Instructions = 4 x 2.5ns = 10ns */
-	__asm__ volatile ("0:\n"
-		"subs %0, %1, #1\n"
-		"bge 0b\n"
-		:"=r" (cyc)
-		:"0"(cyc)
-	);
-}
-
-static struct isp116x_platform_data isp116x_pfm_data = {
-	.remote_wakeup_enable = 1,
-	.delay = isp116x_pfm_delay,
-};
-
-static struct resource isp116x_pfm_resources[] = {
-	[0] =	{
-		.start	= 0x0d000000,
-		.end	= 0x0d000000 + 1,
-		.flags	= IORESOURCE_MEM,
-		},
-	[1] =	{
-		.start  = 0x0d000000 + 4,
-		.end	= 0x0d000000 + 5,
-		.flags  = IORESOURCE_MEM,
-		},
-	[2] =	{
-		.start	= 61,
-		.end	= 61,
-		.flags	= IORESOURCE_IRQ,
-		},
-};
-
-static struct platform_device mp900c_dummy_device = {
-	.name		= "mp900c_dummy",
-	.id		= -1,
-};
-
-static struct platform_device mp900c_usb = {
-	.name		= "isp116x-hcd",
-	.num_resources	= ARRAY_SIZE(isp116x_pfm_resources),
-	.resource	= isp116x_pfm_resources,
-	.dev.platform_data = &isp116x_pfm_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&mp900c_dummy_device,
-	&mp900c_usb,
-};
-
-static void __init mp900c_init(void)
-{
-	printk(KERN_INFO "MobilePro 900/C machine init\n");
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-/* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
-MACHINE_START(NEC_MP900, "MobilePro900/C")
-	.atag_offset	= 0x220100,
-	.init_time	= pxa_timer_init,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= mp900c_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
deleted file mode 100644
index 35546b59c88e..000000000000
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ /dev/null
@@ -1,477 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/mxm8x10.c
- *
- * Support for the Embedian MXM-8x10 Computer on Module
- *
- * Copyright (C) 2006 Marvell International Ltd.
- * Copyright (C) 2009 Embedian Inc.
- * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
- *
- * 2007-09-04: eric miao <eric.y.miao@gmail.com>
- *             rewrite to align with latest kernel
- *
- * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
- * 	       Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
- *             rework for upstream merge
- */
-
-#include <linux/serial_8250.h>
-#include <linux/dm9000.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/asoc-pxa.h>
-#include "pxa320.h"
-
-#include "mxm8x10.h"
-
-#include "devices.h"
-#include "generic.h"
-
-/* GPIO pin definition
-
-External device stuff   - Leave unconfigured for now...
----------------------
-GPIO0   -   DREQ    (External DMA Request)
-GPIO3   -   nGCS2   (External Chip Select) Where is nGCS0; nGCS1; nGCS4; nGCS5 ?
-GPIO4   -   nGCS3
-GPIO15  -   EXT_GPIO1
-GPIO16  -   EXT_GPIO2
-GPIO17  -   EXT_GPIO3
-GPIO24  -   EXT_GPIO4
-GPIO25  -   EXT_GPIO5
-GPIO26  -   EXT_GPIO6
-GPIO27  -   EXT_GPIO7
-GPIO28  -   EXT_GPIO8
-GPIO29  -   EXT_GPIO9
-GPIO30  -   EXT_GPIO10
-GPIO31  -   EXT_GPIO11
-GPIO57  -   EXT_GPIO12
-GPIO74  -   EXT_IRQ1
-GPIO75  -   EXT_IRQ2
-GPIO76  -   EXT_IRQ3
-GPIO77  -   EXT_IRQ4
-GPIO78  -   EXT_IRQ5
-GPIO79  -   EXT_IRQ6
-GPIO80  -   EXT_IRQ7
-GPIO81  -   EXT_IRQ8
-GPIO87  -   VCCIO_PWREN (External Device PWREN)
-
-Dallas 1-Wire   - Leave unconfigured for now...
--------------
-GPIO0_2 -   DS - 1Wire
-
-Ethernet
---------
-GPIO1   -   DM9000 PWR
-GPIO9   -   DM9K_nIRQ
-GPIO36  -   DM9K_RESET
-
-Keypad  - Leave unconfigured by for now...
-------
-GPIO1_2 -   KP_DKIN0
-GPIO5_2 -   KP_MKOUT7
-GPIO82  -   KP_DKIN1
-GPIO85  -   KP_DKIN2
-GPIO86  -   KP_DKIN3
-GPIO113 -   KP_MKIN0
-GPIO114 -   KP_MKIN1
-GPIO115 -   KP_MKIN2
-GPIO116 -   KP_MKIN3
-GPIO117 -   KP_MKIN4
-GPIO118 -   KP_MKIN5
-GPIO119 -   KP_MKIN6
-GPIO120 -   KP_MKIN7
-GPIO121 -   KP_MKOUT0
-GPIO122 -   KP_MKOUT1
-GPIO122 -   KP_MKOUT2
-GPIO123 -   KP_MKOUT3
-GPIO124 -   KP_MKOUT4
-GPIO125 -   KP_MKOUT5
-GPIO127 -   KP_MKOUT6
-
-Data Bus    - Leave unconfigured for now...
---------
-GPIO2   -   nWait (Data Bus)
-
-USB Device
-----------
-GPIO4_2 -   USBD_PULLUP
-GPIO10  -   UTM_CLK (USB Device UTM Clk)
-GPIO49  -   USB 2.0 Device UTM_DATA0
-GPIO50  -   USB 2.0 Device UTM_DATA1
-GPIO51  -   USB 2.0 Device UTM_DATA2
-GPIO52  -   USB 2.0 Device UTM_DATA3
-GPIO53  -   USB 2.0 Device UTM_DATA4
-GPIO54  -   USB 2.0 Device UTM_DATA5
-GPIO55  -   USB 2.0 Device UTM_DATA6
-GPIO56  -   USB 2.0 Device UTM_DATA7
-GPIO58  -   UTM_RXVALID (USB 2.0 Device)
-GPIO59  -   UTM_RXACTIVE (USB 2.0 Device)
-GPIO60  -   UTM_RXERROR
-GPIO61  -   UTM_OPMODE0
-GPIO62  -   UTM_OPMODE1
-GPIO71  -   USBD_INT    (USB Device?)
-GPIO73  -   UTM_TXREADY (USB 2.0 Device)
-GPIO83  -   UTM_TXVALID (USB 2.0 Device)
-GPIO98  -   UTM_RESET   (USB 2.0 device)
-GPIO99  -   UTM_XCVR_SELECT
-GPIO100 -   UTM_TERM_SELECT
-GPIO101 -   UTM_SUSPENDM_X
-GPIO102 -   UTM_LINESTATE0
-GPIO103 -   UTM_LINESTATE1
-
-Card-Bus Interface  - Leave unconfigured for now...
-------------------
-GPIO5   -   nPIOR (I/O space output enable)
-GPIO6   -   nPIOW (I/O space write enable)
-GPIO7   -   nIOS16 (Input from I/O space telling size of data bus)
-GPIO8   -   nPWAIT (Input for inserting wait states)
-
-LCD
----
-GPIO6_2     -   LDD0
-GPIO7_2     -   LDD1
-GPIO8_2     -   LDD2
-GPIO9_2     -   LDD3
-GPIO11_2    -   LDD5
-GPIO12_2    -   LDD6
-GPIO13_2    -   LDD7
-GPIO14_2    -   VSYNC
-GPIO15_2    -   HSYNC
-GPIO16_2    -   VCLK
-GPIO17_2    -   HCLK
-GPIO18_2    -   VDEN
-GPIO63      -   LDD8    (CPU LCD)
-GPIO64      -   LDD9    (CPU LCD)
-GPIO65      -   LDD10   (CPU LCD)
-GPIO66      -   LDD11   (CPU LCD)
-GPIO67      -   LDD12   (CPU LCD)
-GPIO68      -   LDD13   (CPU LCD)
-GPIO69      -   LDD14   (CPU LCD)
-GPIO70      -   LDD15   (CPU LCD)
-GPIO88      -   VCCLCD_PWREN (LCD Panel PWREN)
-GPIO97      -   BACKLIGHT_EN
-GPIO104     -   LCD_PWREN
-
-PWM   - Leave unconfigured for now...
----
-GPIO11  -   PWM0
-GPIO12  -   PWM1
-GPIO13  -   PWM2
-GPIO14  -   PWM3
-
-SD-CARD
--------
-GPIO18  -   SDDATA0
-GPIO19  -   SDDATA1
-GPIO20  -   SDDATA2
-GPIO21  -   SDDATA3
-GPIO22  -   SDCLK
-GPIO23  -   SDCMD
-GPIO72  -   SD_WP
-GPIO84  -   SD_nIRQ_CD  (SD-Card)
-
-I2C
----
-GPIO32  -   I2CSCL
-GPIO33  -   I2CSDA
-
-AC97
-----
-GPIO35  -   AC97_SDATA_IN
-GPIO37  -   AC97_SDATA_OUT
-GPIO38  -   AC97_SYNC
-GPIO39  -   AC97_BITCLK
-GPIO40  -   AC97_nRESET
-
-UART1
------
-GPIO41  -   UART_RXD1
-GPIO42  -   UART_TXD1
-GPIO43  -   UART_CTS1
-GPIO44  -   UART_DCD1
-GPIO45  -   UART_DSR1
-GPIO46  -   UART_nRI1
-GPIO47  -   UART_DTR1
-GPIO48  -   UART_RTS1
-
-UART2
------
-GPIO109 -   RTS2
-GPIO110 -   RXD2
-GPIO111 -   TXD2
-GPIO112 -   nCTS2
-
-UART3
------
-GPIO105 -   nCTS3
-GPIO106 -   nRTS3
-GPIO107 -   TXD3
-GPIO108 -   RXD3
-
-SSP3    - Leave unconfigured for now...
-----
-GPIO89  -   SSP3_CLK
-GPIO90  -   SSP3_SFRM
-GPIO91  -   SSP3_TXD
-GPIO92  -   SSP3_RXD
-
-SSP4
-GPIO93  -   SSP4_CLK
-GPIO94  -   SSP4_SFRM
-GPIO95  -   SSP4_TXD
-GPIO96  -   SSP4_RXD
-*/
-
-static mfp_cfg_t mfp_cfg[] __initdata = {
-	/* USB */
-	GPIO10_UTM_CLK,
-	GPIO49_U2D_PHYDATA_0,
-	GPIO50_U2D_PHYDATA_1,
-	GPIO51_U2D_PHYDATA_2,
-	GPIO52_U2D_PHYDATA_3,
-	GPIO53_U2D_PHYDATA_4,
-	GPIO54_U2D_PHYDATA_5,
-	GPIO55_U2D_PHYDATA_6,
-	GPIO56_U2D_PHYDATA_7,
-	GPIO58_UTM_RXVALID,
-	GPIO59_UTM_RXACTIVE,
-	GPIO60_U2D_RXERROR,
-	GPIO61_U2D_OPMODE0,
-	GPIO62_U2D_OPMODE1,
-	GPIO71_GPIO, /* USBD_INT */
-	GPIO73_UTM_TXREADY,
-	GPIO83_U2D_TXVALID,
-	GPIO98_U2D_RESET,
-	GPIO99_U2D_XCVR_SEL,
-	GPIO100_U2D_TERM_SEL,
-	GPIO101_U2D_SUSPEND,
-	GPIO102_UTM_LINESTATE_0,
-	GPIO103_UTM_LINESTATE_1,
-	GPIO4_2_GPIO | MFP_PULL_HIGH, /* UTM_PULLUP */
-
-	/* DM9000 */
-	GPIO1_GPIO,
-	GPIO9_GPIO,
-	GPIO36_GPIO,
-
-	/* AC97 */
-	GPIO35_AC97_SDATA_IN_0,
-	GPIO37_AC97_SDATA_OUT,
-	GPIO38_AC97_SYNC,
-	GPIO39_AC97_BITCLK,
-	GPIO40_AC97_nACRESET,
-
-	/* UARTS */
-	GPIO41_UART1_RXD,
-	GPIO42_UART1_TXD,
-	GPIO43_UART1_CTS,
-	GPIO44_UART1_DCD,
-	GPIO45_UART1_DSR,
-	GPIO46_UART1_RI,
-	GPIO47_UART1_DTR,
-	GPIO48_UART1_RTS,
-
-	GPIO109_UART2_RTS,
-	GPIO110_UART2_RXD,
-	GPIO111_UART2_TXD,
-	GPIO112_UART2_CTS,
-
-	GPIO105_UART3_CTS,
-	GPIO106_UART3_RTS,
-	GPIO107_UART3_TXD,
-	GPIO108_UART3_RXD,
-
-	GPIO78_GPIO,
-	GPIO79_GPIO,
-	GPIO80_GPIO,
-	GPIO81_GPIO,
-
-	/* I2C */
-	GPIO32_I2C_SCL,
-	GPIO33_I2C_SDA,
-
-	/* MMC */
-	GPIO18_MMC1_DAT0,
-	GPIO19_MMC1_DAT1,
-	GPIO20_MMC1_DAT2,
-	GPIO21_MMC1_DAT3,
-	GPIO22_MMC1_CLK,
-	GPIO23_MMC1_CMD,
-	GPIO72_GPIO | MFP_PULL_HIGH, /* Card Detect */
-	GPIO84_GPIO | MFP_PULL_LOW, /* Write Protect */
-
-	/* IRQ */
-	GPIO74_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ1 */
-	GPIO75_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ2 */
-	GPIO76_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ3 */
-	GPIO77_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ4 */
-	GPIO78_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ5 */
-	GPIO79_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ6 */
-	GPIO80_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ7 */
-	GPIO81_GPIO | MFP_LPM_EDGE_RISE  /* EXT_IRQ8 */
-};
-
-/* MMC/MCI Support */
-#if defined(CONFIG_MMC)
-static struct pxamci_platform_data mxm_8x10_mci_platform_data = {
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms = 10,
-};
-
-static struct gpiod_lookup_table mxm_8x10_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on GPIO 72 */
-		GPIO_LOOKUP("gpio-pxa", MXM_8X10_SD_nCD,
-			    "cd", GPIO_ACTIVE_LOW),
-		/* Write protect on GPIO 84 */
-		GPIO_LOOKUP("gpio-pxa", MXM_8X10_SD_WP,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-void __init mxm_8x10_mmc_init(void)
-{
-	gpiod_add_lookup_table(&mxm_8x10_mci_gpio_table);
-	pxa_set_mci_info(&mxm_8x10_mci_platform_data);
-}
-#endif
-
-/* USB Open Host Controller Interface */
-static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = {
-	.port_mode = PMM_NPS_MODE,
-	.flags = ENABLE_PORT_ALL
-};
-
-void __init mxm_8x10_usb_host_init(void)
-{
-	pxa_set_ohci_info(&mxm_8x10_ohci_platform_data);
-}
-
-void __init mxm_8x10_ac97_init(void)
-{
-	pxa_set_ac97_info(NULL);
-}
-
-/* NAND flash Support */
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-#define NAND_BLOCK_SIZE SZ_128K
-#define NB(x)           (NAND_BLOCK_SIZE * (x))
-static struct mtd_partition mxm_8x10_nand_partitions[] = {
-	[0] = {
-	       .name = "boot",
-	       .size = NB(0x002),
-	       .offset = NB(0x000),
-	       .mask_flags = MTD_WRITEABLE
-	},
-	[1] = {
-	       .name = "kernel",
-	       .size = NB(0x010),
-	       .offset = NB(0x002),
-	       .mask_flags = MTD_WRITEABLE
-	},
-	[2] = {
-	       .name = "root",
-	       .size = NB(0x36c),
-	       .offset = NB(0x012)
-	},
-	[3] = {
-	       .name = "bbt",
-	       .size = NB(0x082),
-	       .offset = NB(0x37e),
-	       .mask_flags = MTD_WRITEABLE
-	}
-};
-
-static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
-	.keep_config	= 1,
-	.parts		= mxm_8x10_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(mxm_8x10_nand_partitions)
-};
-
-static void __init mxm_8x10_nand_init(void)
-{
-	pxa3xx_set_nand_info(&mxm_8x10_nand_info);
-}
-#else
-static inline void mxm_8x10_nand_init(void) {}
-#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
-
-/* Ethernet support: Davicom DM9000 */
-static struct resource dm9k_resources[] = {
-	[0] = {
-	       .start = MXM_8X10_ETH_PHYS + 0x300,
-	       .end = MXM_8X10_ETH_PHYS + 0x300,
-	       .flags = IORESOURCE_MEM
-	},
-	[1] = {
-	       .start = MXM_8X10_ETH_PHYS + 0x308,
-	       .end = MXM_8X10_ETH_PHYS + 0x308,
-	       .flags = IORESOURCE_MEM
-	},
-	[2] = {
-	       .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
-	       .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
-	       .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
-	}
-};
-
-static struct dm9000_plat_data dm9k_plat_data = {
-	.flags = DM9000_PLATF_16BITONLY
-};
-
-static struct platform_device dm9k_device = {
-	.name = "dm9000",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(dm9k_resources),
-	.resource = dm9k_resources,
-	.dev = {
-		.platform_data = &dm9k_plat_data
-	}
-};
-
-static void __init mxm_8x10_ethernet_init(void)
-{
-	platform_device_register(&dm9k_device);
-}
-
-/* PXA UARTs */
-static void __init mxm_8x10_uarts_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-}
-
-/* I2C and Real Time Clock */
-static struct i2c_board_info __initdata mxm_8x10_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68)
-	}
-};
-
-static void __init mxm_8x10_i2c_init(void)
-{
-	i2c_register_board_info(0, mxm_8x10_i2c_devices,
-				ARRAY_SIZE(mxm_8x10_i2c_devices));
-	pxa_set_i2c_info(NULL);
-}
-
-void __init mxm_8x10_barebones_init(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
-
-	mxm_8x10_uarts_init();
-	mxm_8x10_nand_init();
-	mxm_8x10_i2c_init();
-	mxm_8x10_ethernet_init();
-}
diff --git a/arch/arm/mach-pxa/mxm8x10.h b/arch/arm/mach-pxa/mxm8x10.h
deleted file mode 100644
index dcd32321c995..000000000000
--- a/arch/arm/mach-pxa/mxm8x10.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_MXM_8X10_H
-#define __MACH_MXM_8X10_H
-
-#define MXM_8X10_ETH_PHYS	0x13000000
-
-#if defined(CONFIG_MMC)
-
-#define MXM_8X10_SD_nCD (72)
-#define MXM_8X10_SD_WP (84)
-
-extern void mxm_8x10_mmc_init(void);
-#else
-static inline void mxm_8x10_mmc_init(void) {}
-#endif
-
-extern void mxm_8x10_usb_host_init(void);
-extern void mxm_8x10_ac97_init(void);
-
-extern void mxm_8x10_barebones_init(void);
-
-#endif /* __MACH_MXM_8X10_H */
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
deleted file mode 100644
index 1a8d25eecac3..000000000000
--- a/arch/arm/mach-pxa/palm27x.c
+++ /dev/null
@@ -1,473 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Common code for Palm LD, T5, TX, Z72
- *
- * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/regulator/max1586.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include "udc.h"
-#include <linux/platform_data/asoc-palm27x.h>
-#include "palm27x.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data palm27x_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-void __init palm27x_mmc_init(struct gpiod_lookup_table *gtable)
-{
-	if (gtable)
-		gpiod_add_lookup_table(gtable);
-	pxa_set_mci_info(&palm27x_mci_platform_data);
-}
-#endif
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-#if defined(CONFIG_SUSPEND)
-void __init palm27x_pm_init(unsigned long str_base)
-{
-	static const unsigned long resume[] = {
-		0xe3a00101,	/* mov	r0,	#0x40000000 */
-		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-		0xe590f008,	/* ldr	pc, [r0, #0x08] */
-	};
-
-	/*
-	 * Copy the bootloader.
-	 * NOTE: PalmZ72 uses a different wakeup method!
-	 */
-	memcpy(phys_to_virt(str_base), resume, sizeof(resume));
-}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-struct pxafb_mode_info palm_320x480_lcd_mode = {
-	.pixclock	= 57692,
-	.xres		= 320,
-	.yres		= 480,
-	.bpp		= 16,
-
-	.left_margin	= 32,
-	.right_margin	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 1,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-};
-
-struct pxafb_mode_info palm_320x320_lcd_mode = {
-	.pixclock	= 115384,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 27,
-	.right_margin	= 7,
-	.upper_margin	= 7,
-	.lower_margin	= 8,
-
-	.hsync_len	= 6,
-	.vsync_len	= 1,
-};
-
-struct pxafb_mode_info palm_320x320_new_lcd_mode = {
-	.pixclock	= 86538,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 20,
-	.right_margin	= 8,
-	.upper_margin	= 8,
-	.lower_margin	= 5,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-};
-
-static struct pxafb_mach_info palm27x_lcd_screen = {
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static int palm27x_lcd_power;
-static void palm27x_lcd_ctl(int on, struct fb_var_screeninfo *info)
-{
-	gpio_set_value(palm27x_lcd_power, on);
-}
-
-void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
-{
-	palm27x_lcd_screen.modes = mode;
-
-	if (gpio_is_valid(power)) {
-		if (!gpio_request(power, "LCD power")) {
-			pr_err("Palm27x: failed to claim lcd power gpio!\n");
-			return;
-		}
-		if (!gpio_direction_output(power, 1)) {
-			pr_err("Palm27x: lcd power configuration failed!\n");
-			return;
-		}
-		palm27x_lcd_power = power;
-		palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
-	}
-
-	pxa_set_fb_info(NULL, &palm27x_lcd_screen);
-}
-#endif
-
-/******************************************************************************
- * USB Gadget
- ******************************************************************************/
-#if	defined(CONFIG_USB_PXA27X) || \
-	defined(CONFIG_USB_PXA27X_MODULE)
-
-/* The actual GPIO offsets get filled in in the palm27x_udc_init() call */
-static struct gpiod_lookup_table palm27x_udc_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", 0,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", 0,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device palm27x_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted)
-{
-	palm27x_udc_gpiod_table.table[0].chip_hwnum = vbus;
-	palm27x_udc_gpiod_table.table[1].chip_hwnum = pullup;
-	if (vbus_inverted)
-		palm27x_udc_gpiod_table.table[0].flags = GPIO_ACTIVE_LOW;
-
-	gpiod_add_lookup_table(&palm27x_udc_gpiod_table);
-	platform_device_register(&palm27x_gpio_vbus);
-}
-#endif
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data palm27x_ficp_platform_data = {
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-void __init palm27x_irda_init(int pwdn)
-{
-	palm27x_ficp_platform_data.gpio_pwdown = pwdn;
-	pxa_set_ficp_info(&palm27x_ficp_platform_data);
-}
-#endif
-
-/******************************************************************************
- * WM97xx audio, battery
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_WM97XX) || \
-	defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
-static struct wm97xx_batt_pdata palm27x_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-static struct wm97xx_pdata palm27x_wm97xx_pdata = {
-	.batt_pdata	= &palm27x_batt_pdata,
-};
-
-static pxa2xx_audio_ops_t palm27x_ac97_pdata = {
-	.codec_pdata	= { &palm27x_wm97xx_pdata, },
-};
-
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
-	.jack_gpio	= -1,
-};
-
-static struct platform_device palm27x_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palm27x_asoc_pdata,
-	},
-};
-
-void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset)
-{
-	palm27x_ac97_pdata.reset_gpio	= reset;
-	palm27x_asoc_pdata.jack_gpio	= jack;
-
-	if (minv < 0 || maxv < 0) {
-		palm27x_ac97_pdata.codec_pdata[0] = NULL;
-		pxa_set_ac97_info(&palm27x_ac97_pdata);
-	} else {
-		palm27x_batt_pdata.min_voltage	= minv,
-		palm27x_batt_pdata.max_voltage	= maxv,
-
-		pxa_set_ac97_info(&palm27x_ac97_pdata);
-		platform_device_register(&palm27x_asoc);
-	}
-}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static struct pwm_lookup palm27x_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 3500 * 1024,
-		   PWM_POLARITY_NORMAL),
-};
-
-static int palm_bl_power;
-static int palm_lcd_power;
-
-static int palm27x_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(palm_bl_power, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(palm_bl_power, 0);
-	if (ret)
-		goto err2;
-
-	if (gpio_is_valid(palm_lcd_power)) {
-		ret = gpio_request(palm_lcd_power, "LCD POWER");
-		if (ret)
-			goto err2;
-		ret = gpio_direction_output(palm_lcd_power, 0);
-		if (ret)
-			goto err3;
-	}
-
-	return 0;
-err3:
-	gpio_free(palm_lcd_power);
-err2:
-	gpio_free(palm_bl_power);
-err:
-	return ret;
-}
-
-static int palm27x_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(palm_bl_power, brightness);
-	if (gpio_is_valid(palm_lcd_power))
-		gpio_set_value(palm_lcd_power, brightness);
-	return brightness;
-}
-
-static void palm27x_backlight_exit(struct device *dev)
-{
-	gpio_free(palm_bl_power);
-	if (gpio_is_valid(palm_lcd_power))
-		gpio_free(palm_lcd_power);
-}
-
-static struct platform_pwm_backlight_data palm27x_backlight_data = {
-	.max_brightness	= 0xfe,
-	.dft_brightness	= 0x7e,
-	.init		= palm27x_backlight_init,
-	.notify		= palm27x_backlight_notify,
-	.exit		= palm27x_backlight_exit,
-};
-
-static struct platform_device palm27x_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &palm27x_backlight_data,
-	},
-};
-
-void __init palm27x_pwm_init(int bl, int lcd)
-{
-	palm_bl_power	= bl;
-	palm_lcd_power	= lcd;
-	pwm_add_table(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup));
-	platform_device_register(&palm27x_backlight);
-}
-#endif
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
-static int palm_ac_state;
-static int palm_usb_state;
-
-static int palm27x_power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(palm_ac_state, "AC state");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(palm_ac_state);
-	if (ret)
-		goto err2;
-
-	if (gpio_is_valid(palm_usb_state)) {
-		ret = gpio_request(palm_usb_state, "USB state");
-		if (ret)
-			goto err2;
-		ret = gpio_direction_input(palm_usb_state);
-		if (ret)
-			goto err3;
-	}
-
-	return 0;
-err3:
-	gpio_free(palm_usb_state);
-err2:
-	gpio_free(palm_ac_state);
-err1:
-	return ret;
-}
-
-static void palm27x_power_supply_exit(struct device *dev)
-{
-	gpio_free(palm_usb_state);
-	gpio_free(palm_ac_state);
-}
-
-static int palm27x_is_ac_online(void)
-{
-	return gpio_get_value(palm_ac_state);
-}
-
-static int palm27x_is_usb_online(void)
-{
-	return !gpio_get_value(palm_usb_state);
-}
-static char *palm27x_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata palm27x_ps_info = {
-	.init			= palm27x_power_supply_init,
-	.exit			= palm27x_power_supply_exit,
-	.is_ac_online		= palm27x_is_ac_online,
-	.is_usb_online		= palm27x_is_usb_online,
-	.supplied_to		= palm27x_supplicants,
-	.num_supplicants	= ARRAY_SIZE(palm27x_supplicants),
-};
-
-static struct platform_device palm27x_power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palm27x_ps_info,
-	},
-};
-
-void __init palm27x_power_init(int ac, int usb)
-{
-	palm_ac_state	= ac;
-	palm_usb_state	= usb;
-	platform_device_register(&palm27x_power_supply);
-}
-#endif
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-static struct regulator_consumer_supply palm27x_max1587a_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data palm27x_max1587a_v3_info = {
-	.constraints = {
-		.name		= "vcc_core range",
-		.min_uV		= 900000,
-		.max_uV		= 1705000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.consumer_supplies	= palm27x_max1587a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(palm27x_max1587a_consumers),
-};
-
-static struct max1586_subdev_data palm27x_max1587a_subdevs[] = {
-	{
-		.name		= "vcc_core",
-		.id		= MAX1586_V3,
-		.platform_data	= &palm27x_max1587a_v3_info,
-	}
-};
-
-static struct max1586_platform_data palm27x_max1587a_info = {
-	.subdevs     = palm27x_max1587a_subdevs,
-	.num_subdevs = ARRAY_SIZE(palm27x_max1587a_subdevs),
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data	= &palm27x_max1587a_info,
-	},
-};
-
-static struct i2c_pxa_platform_data palm27x_i2c_power_info = {
-	.use_pio	= 1,
-};
-
-void __init palm27x_pmic_init(void)
-{
-	i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
-	pxa27x_set_i2c_power_info(&palm27x_i2c_power_info);
-}
-#endif
diff --git a/arch/arm/mach-pxa/palm27x.h b/arch/arm/mach-pxa/palm27x.h
deleted file mode 100644
index bd3075bbb3aa..000000000000
--- a/arch/arm/mach-pxa/palm27x.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Common functions for Palm LD, T5, TX, Z72
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- */
-#ifndef	__INCLUDE_MACH_PALM27X__
-#define	__INCLUDE_MACH_PALM27X__
-
-#include <linux/gpio/machine.h>
-
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-extern void __init palm27x_mmc_init(struct gpiod_lookup_table *gtable);
-#else
-static inline void palm27x_mmc_init(struct gpiod_lookup_table *gtable)
-{}
-#endif
-
-#if defined(CONFIG_SUSPEND)
-extern void __init palm27x_pm_init(unsigned long str_base);
-#else
-static inline void palm27x_pm_init(unsigned long str_base) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-extern struct pxafb_mode_info palm_320x480_lcd_mode;
-extern struct pxafb_mode_info palm_320x320_lcd_mode;
-extern struct pxafb_mode_info palm_320x320_new_lcd_mode;
-extern void __init palm27x_lcd_init(int power,
-					struct pxafb_mode_info *mode);
-#else
-#define palm27x_lcd_init(power, mode)	do {} while (0)
-#endif
-
-#if	defined(CONFIG_USB_PXA27X) || \
-	defined(CONFIG_USB_PXA27X_MODULE)
-extern void __init palm27x_udc_init(int vbus, int pullup,
-					int vbus_inverted);
-#else
-static inline void palm27x_udc_init(int vbus, int pullup, int vbus_inverted) {}
-#endif
-
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-extern void __init palm27x_irda_init(int pwdn);
-#else
-static inline void palm27x_irda_init(int pwdn) {}
-#endif
-
-#if	defined(CONFIG_TOUCHSCREEN_WM97XX) || \
-	defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
-extern void __init palm27x_ac97_init(int minv, int maxv, int jack,
-					int reset);
-#else
-static inline void palm27x_ac97_init(int minv, int maxv, int jack, int reset) {}
-#endif
-
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-extern void __init palm27x_pwm_init(int bl, int lcd);
-#else
-static inline void palm27x_pwm_init(int bl, int lcd) {}
-#endif
-
-#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
-extern void __init palm27x_power_init(int ac, int usb);
-#else
-static inline void palm27x_power_init(int ac, int usb) {}
-#endif
-
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-extern void __init palm27x_pmic_init(void);
-#else
-static inline void palm27x_pmic_init(void) {}
-#endif
-
-#endif	/* __INCLUDE_MACH_PALM27X__ */
diff --git a/arch/arm/mach-pxa/palmld-pcmcia.c b/arch/arm/mach-pxa/palmld-pcmcia.c
deleted file mode 100644
index 720294a50864..000000000000
--- a/arch/arm/mach-pxa/palmld-pcmcia.c
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_palmld.c
- *
- * Driver for Palm LifeDrive PCMCIA
- *
- * Copyright (C) 2006 Alex Osborne <ato@meshy.org>
- * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <pcmcia/soc_common.h>
-
-#include "palmld.h"
-
-static struct gpio palmld_pcmcia_gpios[] = {
-	{ GPIO_NR_PALMLD_PCMCIA_POWER,	GPIOF_INIT_LOW,	"PCMCIA Power" },
-	{ GPIO_NR_PALMLD_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
-};
-
-static int palmld_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(palmld_pcmcia_gpios,
-				ARRAY_SIZE(palmld_pcmcia_gpios));
-
-	skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMLD_PCMCIA_READY;
-	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-
-	return ret;
-}
-
-static void palmld_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(palmld_pcmcia_gpios, ARRAY_SIZE(palmld_pcmcia_gpios));
-}
-
-static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->detect = 1; /* always inserted */
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int palmld_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-					const socket_state_t *state)
-{
-	gpio_set_value(GPIO_NR_PALMLD_PCMCIA_POWER, 1);
-	gpio_set_value(GPIO_NR_PALMLD_PCMCIA_RESET,
-			!!(state->flags & SS_RESET));
-
-	return 0;
-}
-
-static struct pcmcia_low_level palmld_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 1,
-	.nr			= 1,
-
-	.hw_init		= palmld_pcmcia_hw_init,
-	.hw_shutdown		= palmld_pcmcia_hw_shutdown,
-
-	.socket_state		= palmld_pcmcia_socket_state,
-	.configure_socket	= palmld_pcmcia_configure_socket,
-};
-
-static struct platform_device *palmld_pcmcia_device;
-
-static int __init palmld_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_palmld())
-		return -ENODEV;
-
-	palmld_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!palmld_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(palmld_pcmcia_device, &palmld_pcmcia_ops,
-					sizeof(palmld_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(palmld_pcmcia_device);
-
-	if (ret)
-		platform_device_put(palmld_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit palmld_pcmcia_exit(void)
-{
-	platform_device_unregister(palmld_pcmcia_device);
-}
-
-module_init(palmld_pcmcia_init);
-module_exit(palmld_pcmcia_exit);
-
-MODULE_AUTHOR("Alex Osborne <ato@meshy.org>,"
-	    " Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Palm LifeDrive");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
deleted file mode 100644
index 32308c63884e..000000000000
--- a/arch/arm/mach-pxa/palmld.c
+++ /dev/null
@@ -1,392 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for Palm LifeDrive
- *
- * Author:     Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Alex Osborne <ato@meshy.org>
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include "palmld.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/asoc-palm27x.h>
-#include "palm27x.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmld_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO114_GPIO,	/* SD power */
-	GPIO116_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO108_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* MATRIX KEYPAD */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* GPIO KEYS */
-	GPIO10_GPIO,	/* hotsync button */
-	GPIO12_GPIO,	/* power switch */
-	GPIO15_GPIO,	/* lock switch */
-
-	/* LEDs */
-	GPIO52_GPIO,	/* green led */
-	GPIO94_GPIO,	/* orange led */
-
-	/* PCMCIA */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO36_GPIO,	/* wifi power */
-	GPIO38_GPIO,	/* wifi ready */
-	GPIO81_GPIO,	/* wifi reset */
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-
-	/* HDD */
-	GPIO98_GPIO,	/* HDD reset */
-	GPIO115_GPIO,	/* HDD power */
-
-	/* MISC */
-	GPIO13_GPIO,	/* earphone detect */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition palmld_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data palmld_flash_data[] = {
-	{
-		.width		= 2,			/* bankwidth in bytes */
-		.parts		= palmld_partitions,
-		.nr_parts	= ARRAY_SIZE(palmld_partitions)
-	}
-};
-
-static struct resource palmld_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_4M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device palmld_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &palmld_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = palmld_flash_data,
-	},
-};
-
-static void __init palmld_nor_init(void)
-{
-	platform_device_register(&palmld_flash);
-}
-#else
-static inline void palmld_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int palmld_matrix_keys[] = {
-	KEY(0, 1, KEY_F2),
-	KEY(0, 2, KEY_UP),
-
-	KEY(1, 0, KEY_F3),
-	KEY(1, 1, KEY_F4),
-	KEY(1, 2, KEY_RIGHT),
-
-	KEY(2, 0, KEY_F1),
-	KEY(2, 1, KEY_F5),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_F6),
-	KEY(3, 1, KEY_ENTER),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct matrix_keymap_data palmld_matrix_keymap_data = {
-	.keymap			= palmld_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(palmld_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_keymap_data	= &palmld_matrix_keymap_data,
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmld_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmld_keypad_platform_data);
-}
-#else
-static inline void palmld_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmld_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
-	{KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" },
-	{KEY_POWER, GPIO_NR_PALMLD_POWER_SWITCH, 0, "Power Switch" },
-};
-
-static struct gpio_keys_platform_data palmld_pxa_keys_data = {
-	.buttons	= palmld_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmld_pxa_buttons),
-};
-
-static struct platform_device palmld_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmld_pxa_keys_data,
-	},
-};
-
-static void __init palmld_keys_init(void)
-{
-	platform_device_register(&palmld_pxa_keys);
-}
-#else
-static inline void palmld_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led gpio_leds[] = {
-{
-	.name			= "palmld:green:led",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMLD_LED_GREEN,
-}, {
-	.name			= "palmld:amber:led",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMLD_LED_AMBER,
-},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device palmld_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	}
-};
-
-static void __init palmld_leds_init(void)
-{
-	platform_device_register(&palmld_leds);
-}
-#else
-static inline void palmld_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * HDD
- ******************************************************************************/
-#if defined(CONFIG_PATA_PALMLD) || defined(CONFIG_PATA_PALMLD_MODULE)
-static struct resource palmld_ide_resources[] = {
-	DEFINE_RES_MEM(PALMLD_IDE_PHYS, 0x1000),
-};
-
-static struct platform_device palmld_ide_device = {
-	.name		= "pata_palmld",
-	.id		= -1,
-	.resource	= palmld_ide_resources,
-	.num_resources	= ARRAY_SIZE(palmld_ide_resources),
-};
-
-static struct gpiod_lookup_table palmld_ide_gpio_table = {
-	.dev_id = "pata_palmld",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_IDE_PWEN,
-			    "power", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_IDE_RESET,
-			    "reset", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init palmld_ide_init(void)
-{
-	gpiod_add_lookup_table(&palmld_ide_gpio_table);
-	platform_device_register(&palmld_ide_device);
-}
-#else
-static inline void palmld_ide_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static struct map_desc palmld_io_desc[] __initdata = {
-{
-	.virtual	= PALMLD_IDE_VIRT,
-	.pfn		= __phys_to_pfn(PALMLD_IDE_PHYS),
-	.length		= PALMLD_IDE_SIZE,
-	.type		= MT_DEVICE
-},
-{
-	.virtual	= PALMLD_USB_VIRT,
-	.pfn		= __phys_to_pfn(PALMLD_USB_PHYS),
-	.length		= PALMLD_USB_SIZE,
-	.type		= MT_DEVICE
-},
-};
-
-static void __init palmld_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc));
-}
-
-static struct gpiod_lookup_table palmld_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_SD_POWER,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table palmld_wm97xx_touch_gpio_table = {
-	.dev_id = "wm97xx-touch",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", 27, "touch", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init palmld_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(&palmld_mci_gpio_table);
-	gpiod_add_lookup_table(&palmld_wm97xx_touch_gpio_table);
-	palm27x_pm_init(PALMLD_STR_BASE);
-	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
-	palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE);
-	palm27x_ac97_init(PALMLD_BAT_MIN_VOLTAGE, PALMLD_BAT_MAX_VOLTAGE,
-			GPIO_NR_PALMLD_EARPHONE_DETECT, 95);
-	palm27x_pwm_init(GPIO_NR_PALMLD_BL_POWER, GPIO_NR_PALMLD_LCD_POWER);
-	palm27x_power_init(GPIO_NR_PALMLD_POWER_DETECT,
-			GPIO_NR_PALMLD_USB_DETECT_N);
-	palm27x_pmic_init();
-	palmld_kpc_init();
-	palmld_keys_init();
-	palmld_nor_init();
-	palmld_leds_init();
-	palmld_ide_init();
-}
-
-MACHINE_START(PALMLD, "Palm LifeDrive")
-	.atag_offset	= 0x100,
-	.map_io		= palmld_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmld_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/palmld.h b/arch/arm/mach-pxa/palmld.h
deleted file mode 100644
index 99a6d8b3a1e3..000000000000
--- a/arch/arm/mach-pxa/palmld.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Palm LifeDrive Handheld Computer
- *
- * Authors:	Alex Osborne <ato@meshy.org>
- *		Marek Vasut <marek.vasut@gmail.com>
- */
-
-#ifndef _INCLUDE_PALMLD_H_
-#define _INCLUDE_PALMLD_H_
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMLD_GPIO_RESET	1
-#define GPIO_NR_PALMLD_POWER_DETECT	4
-#define GPIO_NR_PALMLD_HOTSYNC_BUTTON_N	10
-#define GPIO_NR_PALMLD_POWER_SWITCH	12
-#define GPIO_NR_PALMLD_EARPHONE_DETECT 	13
-#define GPIO_NR_PALMLD_LOCK_SWITCH	15
-
-/* SD/MMC */
-#define GPIO_NR_PALMLD_SD_DETECT_N	14
-#define GPIO_NR_PALMLD_SD_POWER		114
-#define GPIO_NR_PALMLD_SD_READONLY	116
-
-/* TOUCHSCREEN */
-#define GPIO_NR_PALMLD_WM9712_IRQ	27
-
-/* IRDA */
-#define GPIO_NR_PALMLD_IR_DISABLE	108
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMLD_BL_POWER		19
-#define GPIO_NR_PALMLD_LCD_POWER	96
-
-/* LCD BORDER */
-#define GPIO_NR_PALMLD_BORDER_SWITCH	21
-#define GPIO_NR_PALMLD_BORDER_SELECT	22
-
-/* BLUETOOTH */
-#define GPIO_NR_PALMLD_BT_POWER		17
-#define GPIO_NR_PALMLD_BT_RESET		83
-
-/* PCMCIA (WiFi) */
-#define GPIO_NR_PALMLD_PCMCIA_READY	38
-#define GPIO_NR_PALMLD_PCMCIA_POWER	36
-#define GPIO_NR_PALMLD_PCMCIA_RESET	81
-
-/* LEDs */
-#define GPIO_NR_PALMLD_LED_GREEN	52
-#define GPIO_NR_PALMLD_LED_AMBER	94
-
-/* IDE */
-#define GPIO_NR_PALMLD_IDE_RESET	98
-#define GPIO_NR_PALMLD_IDE_PWEN		115
-
-/* USB */
-#define GPIO_NR_PALMLD_USB_DETECT_N	3
-#define GPIO_NR_PALMLD_USB_READY	86
-#define GPIO_NR_PALMLD_USB_RESET	88
-#define GPIO_NR_PALMLD_USB_INT		106
-#define GPIO_NR_PALMLD_USB_POWER	118
-/* 20, 53 and 86 are usb related too */
-
-/* INTERRUPTS */
-#define IRQ_GPIO_PALMLD_GPIO_RESET	PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_GPIO_RESET)
-#define IRQ_GPIO_PALMLD_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_SD_DETECT_N)
-#define IRQ_GPIO_PALMLD_WM9712_IRQ	PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_WM9712_IRQ)
-#define IRQ_GPIO_PALMLD_IDE_IRQ		PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_IDE_IRQ)
-
-
-/** HERE ARE INIT VALUES **/
-
-/* IO mappings */
-#define PALMLD_USB_PHYS		PXA_CS2_PHYS
-#define PALMLD_USB_VIRT		0xf0000000
-#define PALMLD_USB_SIZE		0x00100000
-
-#define PALMLD_IDE_PHYS		0x20000000
-#define PALMLD_IDE_VIRT		0xf1000000
-#define PALMLD_IDE_SIZE		0x00100000
-
-#define PALMLD_PHYS_IO_START	0x40000000
-#define PALMLD_STR_BASE		0xa0200000
-
-/* BATTERY */
-#define PALMLD_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
-#define PALMLD_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
-#define PALMLD_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMLD_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMLD_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMLD_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMLD_MAX_LIFE_MINS		240	/* on-life in minutes */
-
-#define PALMLD_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMLD_MAX_INTENSITY		0xFE
-#define PALMLD_DEFAULT_INTENSITY	0x7E
-#define PALMLD_LIMIT_MASK		0x7F
-#define PALMLD_PRESCALER		0x3F
-#define PALMLD_PERIOD_NS		3500
-
-#endif
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
deleted file mode 100644
index 463b62ec1b01..000000000000
--- a/arch/arm/mach-pxa/palmt5.c
+++ /dev/null
@@ -1,234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for Palm Tungsten|T5
- *
- * Author:	Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Ales Snuparek <snuparek@atlas.cz>
- *		Justin Kendrick <twilightsentry@gmail.com>
- *		RichardT5 <richard_t5@users.sourceforge.net>
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/memblock.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "palmt5.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "udc.h"
-#include <linux/platform_data/asoc-palm27x.h>
-#include "palm27x.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmt5_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO114_GPIO,	/* SD power */
-	GPIO115_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO40_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* USB */
-	GPIO15_GPIO,	/* usb detect */
-	GPIO93_GPIO,	/* usb power */
-
-	/* MATRIX KEYPAD */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-
-	/* MISC */
-	GPIO10_GPIO,	/* hotsync button */
-	GPIO90_GPIO,	/* power detect */
-	GPIO107_GPIO,	/* earphone detect */
-};
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int palmt5_matrix_keys[] = {
-	KEY(0, 0, KEY_POWER),
-	KEY(0, 1, KEY_F1),
-	KEY(0, 2, KEY_ENTER),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_F3),
-	KEY(1, 2, KEY_F4),
-
-	KEY(2, 0, KEY_UP),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_RIGHT),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct matrix_keymap_data palmt5_matrix_keymap_data = {
-	.keymap			= palmt5_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(palmt5_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_keymap_data	= &palmt5_matrix_keymap_data,
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmt5_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmt5_keypad_platform_data);
-}
-#else
-static inline void palmt5_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmt5_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
-};
-
-static struct gpio_keys_platform_data palmt5_pxa_keys_data = {
-	.buttons	= palmt5_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmt5_pxa_buttons),
-};
-
-static struct platform_device palmt5_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmt5_pxa_keys_data,
-	},
-};
-
-static void __init palmt5_keys_init(void)
-{
-	platform_device_register(&palmt5_pxa_keys);
-}
-#else
-static inline void palmt5_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init palmt5_reserve(void)
-{
-	memblock_reserve(0xa0200000, 0x1000);
-}
-
-static struct gpiod_lookup_table palmt5_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMT5_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMT5_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMT5_SD_POWER,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table palmt5_wm97xx_touch_gpio_table = {
-	.dev_id = "wm97xx-touch",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", 27, "touch", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init palmt5_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(&palmt5_mci_gpio_table);
-	gpiod_add_lookup_table(&palmt5_wm97xx_touch_gpio_table);
-	palm27x_pm_init(PALMT5_STR_BASE);
-	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
-	palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N,
-			GPIO_NR_PALMT5_USB_PULLUP, 1);
-	palm27x_irda_init(GPIO_NR_PALMT5_IR_DISABLE);
-	palm27x_ac97_init(PALMT5_BAT_MIN_VOLTAGE, PALMT5_BAT_MAX_VOLTAGE,
-			GPIO_NR_PALMT5_EARPHONE_DETECT, 95);
-	palm27x_pwm_init(GPIO_NR_PALMT5_BL_POWER, GPIO_NR_PALMT5_LCD_POWER);
-	palm27x_power_init(GPIO_NR_PALMT5_POWER_DETECT, -1);
-	palm27x_pmic_init();
-	palmt5_kpc_init();
-	palmt5_keys_init();
-}
-
-MACHINE_START(PALMT5, "Palm Tungsten|T5")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.reserve	= palmt5_reserve,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmt5_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/palmt5.h b/arch/arm/mach-pxa/palmt5.h
deleted file mode 100644
index cf84aedca717..000000000000
--- a/arch/arm/mach-pxa/palmt5.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Palm Tungsten|T5 Handheld Computer
- *
- * Authors:	Ales Snuparek <snuparek@atlas.cz>
- *		Marek Vasut <marek.vasut@gmail.com>
- *		Justin Kendrick <twilightsentry@gmail.com>
- *		RichardT5 <richard_t5@users.sourceforge.net>
- */
-
-#ifndef _INCLUDE_PALMT5_H_
-#define _INCLUDE_PALMT5_H_
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMT5_GPIO_RESET		1
-
-#define GPIO_NR_PALMT5_POWER_DETECT		90
-#define GPIO_NR_PALMT5_HOTSYNC_BUTTON_N		10
-#define GPIO_NR_PALMT5_EARPHONE_DETECT		107
-
-/* SD/MMC */
-#define GPIO_NR_PALMT5_SD_DETECT_N		14
-#define GPIO_NR_PALMT5_SD_POWER			114
-#define GPIO_NR_PALMT5_SD_READONLY		115
-
-/* TOUCHSCREEN */
-#define GPIO_NR_PALMT5_WM9712_IRQ		27
-
-/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMT5_IR_DISABLE		40
-
-/* USB */
-#define GPIO_NR_PALMT5_USB_DETECT_N		15
-#define GPIO_NR_PALMT5_USB_PULLUP		93
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMT5_BL_POWER			84
-#define GPIO_NR_PALMT5_LCD_POWER		96
-
-/* BLUETOOTH */
-#define GPIO_NR_PALMT5_BT_POWER			17
-#define GPIO_NR_PALMT5_BT_RESET			83
-
-/* INTERRUPTS */
-#define IRQ_GPIO_PALMT5_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_SD_DETECT_N)
-#define IRQ_GPIO_PALMT5_WM9712_IRQ	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_WM9712_IRQ)
-#define IRQ_GPIO_PALMT5_USB_DETECT	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_USB_DETECT)
-#define IRQ_GPIO_PALMT5_GPIO_RESET	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_GPIO_RESET)
-
-/** HERE ARE INIT VALUES **/
-
-/* Various addresses  */
-#define PALMT5_PHYS_RAM_START	0xa0000000
-#define PALMT5_PHYS_IO_START	0x40000000
-#define PALMT5_STR_BASE		0xa0200000
-
-/* TOUCHSCREEN */
-#define AC97_LINK_FRAME		21
-
-/* BATTERY */
-#define PALMT5_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMT5_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMT5_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMT5_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMT5_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMT5_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMT5_MAX_LIFE_MINS		360    /* on-life in minutes */
-
-#define PALMT5_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMT5_MAX_INTENSITY		0xFE
-#define PALMT5_DEFAULT_INTENSITY	0x7E
-#define PALMT5_LIMIT_MASK		0x7F
-#define PALMT5_PRESCALER		0x3F
-#define PALMT5_PERIOD_NS		3500
-
-#endif
diff --git a/arch/arm/mach-pxa/palmtc-pcmcia.c b/arch/arm/mach-pxa/palmtc-pcmcia.c
deleted file mode 100644
index 8e3f382343fe..000000000000
--- a/arch/arm/mach-pxa/palmtc-pcmcia.c
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_palmtc.c
- *
- * Driver for Palm Tungsten|C PCMCIA
- *
- * Copyright (C) 2008 Alex Osborne <ato@meshy.org>
- * Copyright (C) 2009-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-
-#include <asm/mach-types.h>
-#include "palmtc.h"
-#include <pcmcia/soc_common.h>
-
-static struct gpio palmtc_pcmcia_gpios[] = {
-	{ GPIO_NR_PALMTC_PCMCIA_POWER1,	GPIOF_INIT_LOW,	"PCMCIA Power 1" },
-	{ GPIO_NR_PALMTC_PCMCIA_POWER2,	GPIOF_INIT_LOW,	"PCMCIA Power 2" },
-	{ GPIO_NR_PALMTC_PCMCIA_POWER3,	GPIOF_INIT_LOW,	"PCMCIA Power 3" },
-	{ GPIO_NR_PALMTC_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
-	{ GPIO_NR_PALMTC_PCMCIA_PWRREADY, GPIOF_IN,	"PCMCIA Power Ready" },
-};
-
-static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(palmtc_pcmcia_gpios,
-				ARRAY_SIZE(palmtc_pcmcia_gpios));
-
-	skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMTC_PCMCIA_READY;
-	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-
-	return ret;
-}
-
-static void palmtc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(palmtc_pcmcia_gpios, ARRAY_SIZE(palmtc_pcmcia_gpios));
-}
-
-static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->detect = 1; /* always inserted */
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int palmtc_wifi_powerdown(void)
-{
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 0);
-	mdelay(40);
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 0);
-	return 0;
-}
-
-static int palmtc_wifi_powerup(void)
-{
-	int timeout = 50;
-
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 1);
-	mdelay(50);
-
-	/* Power up the card, 1.8V first, after a while 3.3V */
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 1);
-	mdelay(100);
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 1);
-
-	/* Wait till the card is ready */
-	while (!gpio_get_value(GPIO_NR_PALMTC_PCMCIA_PWRREADY) &&
-		timeout) {
-		mdelay(1);
-		timeout--;
-	}
-
-	/* Power down the WiFi in case of error */
-	if (!timeout) {
-		palmtc_wifi_powerdown();
-		return 1;
-	}
-
-	/* Reset the card */
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
-	mdelay(20);
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 0);
-	mdelay(25);
-
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 0);
-
-	return 0;
-}
-
-static int palmtc_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-					const socket_state_t *state)
-{
-	int ret = 1;
-
-	if (state->Vcc == 0)
-		ret = palmtc_wifi_powerdown();
-	else if (state->Vcc == 33)
-		ret = palmtc_wifi_powerup();
-
-	return ret;
-}
-
-static struct pcmcia_low_level palmtc_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 0,
-	.nr			= 1,
-
-	.hw_init		= palmtc_pcmcia_hw_init,
-	.hw_shutdown		= palmtc_pcmcia_hw_shutdown,
-
-	.socket_state		= palmtc_pcmcia_socket_state,
-	.configure_socket	= palmtc_pcmcia_configure_socket,
-};
-
-static struct platform_device *palmtc_pcmcia_device;
-
-static int __init palmtc_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_palmtc())
-		return -ENODEV;
-
-	palmtc_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!palmtc_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(palmtc_pcmcia_device, &palmtc_pcmcia_ops,
-					sizeof(palmtc_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(palmtc_pcmcia_device);
-
-	if (ret)
-		platform_device_put(palmtc_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit palmtc_pcmcia_exit(void)
-{
-	platform_device_unregister(palmtc_pcmcia_device);
-}
-
-module_init(palmtc_pcmcia_init);
-module_exit(palmtc_pcmcia_exit);
-
-MODULE_AUTHOR("Alex Osborne <ato@meshy.org>,"
-	    " Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Palm Tungsten|C");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
deleted file mode 100644
index 3054ffa397ad..000000000000
--- a/arch/arm/mach-pxa/palmtc.c
+++ /dev/null
@@ -1,539 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/palmtc.c
- *
- * Support for the Palm Tungsten|C
- *
- * Author:	Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Petr Blaha <p3t3@centrum.cz>
- *		Chetan S. Kumar <shivakumar.chetan@gmail.com>
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/input.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio/machine.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/ucb1400.h>
-#include <linux/power_supply.h>
-#include <linux/gpio_keys.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa25x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "palmtc.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include "udc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmtc_pin_config[] __initdata = {
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-	GPIO12_GPIO,	/* detect */
-	GPIO32_GPIO,	/* power */
-	GPIO54_GPIO,	/* r/o switch */
-
-	/* PCMCIA */
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO49_nPWE,
-	GPIO48_nPOE,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO57_nIOIS16,
-	GPIO56_nPWAIT,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* IrDA */
-	GPIO45_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO17_PWM1_OUT,
-
-	/* USB */
-	GPIO4_GPIO,	/* detect */
-	GPIO36_GPIO,	/* pullup */
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* MATRIX KEYPAD */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 0 */
-	GPIO9_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 1 */
-	GPIO10_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 2 */
-	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 3 */
-	GPIO18_GPIO | MFP_LPM_DRIVE_LOW,	/* out 0 */
-	GPIO19_GPIO | MFP_LPM_DRIVE_LOW,	/* out 1 */
-	GPIO20_GPIO | MFP_LPM_DRIVE_LOW,	/* out 2 */
-	GPIO21_GPIO | MFP_LPM_DRIVE_LOW,	/* out 3 */
-	GPIO22_GPIO | MFP_LPM_DRIVE_LOW,	/* out 4 */
-	GPIO23_GPIO | MFP_LPM_DRIVE_LOW,	/* out 5 */
-	GPIO24_GPIO | MFP_LPM_DRIVE_LOW,	/* out 6 */
-	GPIO25_GPIO | MFP_LPM_DRIVE_LOW,	/* out 7 */
-	GPIO26_GPIO | MFP_LPM_DRIVE_LOW,	/* out 8 */
-	GPIO27_GPIO | MFP_LPM_DRIVE_LOW,	/* out 9 */
-	GPIO79_GPIO | MFP_LPM_DRIVE_LOW,	/* out 10 */
-	GPIO80_GPIO | MFP_LPM_DRIVE_LOW,	/* out 11 */
-
-	/* PXA GPIO KEYS */
-	GPIO7_GPIO | WAKEUP_ON_EDGE_BOTH,	/* hotsync button on cradle */
-
-	/* MISC */
-	GPIO1_RST,	/* reset */
-	GPIO2_GPIO,	/* earphone detect */
-	GPIO16_GPIO,	/* backlight switch */
-};
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data palmtc_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-static struct gpiod_lookup_table palmtc_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_POWER,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init palmtc_mmc_init(void)
-{
-	gpiod_add_lookup_table(&palmtc_mci_gpio_table);
-	pxa_set_mci_info(&palmtc_mci_platform_data);
-}
-#else
-static inline void palmtc_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmtc_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
-};
-
-static struct gpio_keys_platform_data palmtc_pxa_keys_data = {
-	.buttons	= palmtc_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmtc_pxa_buttons),
-};
-
-static struct platform_device palmtc_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmtc_pxa_keys_data,
-	},
-};
-
-static void __init palmtc_keys_init(void)
-{
-	platform_device_register(&palmtc_pxa_keys);
-}
-#else
-static inline void palmtc_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-
-static struct gpiod_lookup_table palmtc_pwm_bl_gpio_table = {
-	.dev_id = "pwm-backlight.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_BL_POWER,
-			    "enable", GPIO_ACTIVE_HIGH),
-	},
-};
-
-static struct pwm_lookup palmtc_pwm_lookup[] = {
-	PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data palmtc_backlight_data = {
-	.max_brightness	= PALMTC_MAX_INTENSITY,
-	.dft_brightness	= PALMTC_MAX_INTENSITY,
-};
-
-static struct platform_device palmtc_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa25x_device_pwm1.dev,
-		.platform_data	= &palmtc_backlight_data,
-	},
-};
-
-static void __init palmtc_pwm_init(void)
-{
-	gpiod_add_lookup_table(&palmtc_pwm_bl_gpio_table);
-	pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup));
-	platform_device_register(&palmtc_backlight);
-}
-#else
-static inline void palmtc_pwm_init(void) {}
-#endif
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data palmtc_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMTC_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-static void __init palmtc_irda_init(void)
-{
-	pxa_set_ficp_info(&palmtc_ficp_platform_data);
-}
-#else
-static inline void palmtc_irda_init(void) {}
-#endif
-
-/******************************************************************************
- * Keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
-static const uint32_t palmtc_matrix_keys[] = {
-	KEY(0, 0, KEY_F1),
-	KEY(0, 1, KEY_X),
-	KEY(0, 2, KEY_POWER),
-	KEY(0, 3, KEY_TAB),
-	KEY(0, 4, KEY_A),
-	KEY(0, 5, KEY_Q),
-	KEY(0, 6, KEY_LEFTSHIFT),
-	KEY(0, 7, KEY_Z),
-	KEY(0, 8, KEY_S),
-	KEY(0, 9, KEY_W),
-	KEY(0, 10, KEY_E),
-	KEY(0, 11, KEY_UP),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 3, KEY_D),
-	KEY(1, 4, KEY_C),
-	KEY(1, 5, KEY_F),
-	KEY(1, 6, KEY_R),
-	KEY(1, 7, KEY_SPACE),
-	KEY(1, 8, KEY_V),
-	KEY(1, 9, KEY_G),
-	KEY(1, 10, KEY_T),
-	KEY(1, 11, KEY_LEFT),
-
-	KEY(2, 0, KEY_F3),
-	KEY(2, 1, KEY_LEFTCTRL),
-	KEY(2, 3, KEY_H),
-	KEY(2, 4, KEY_Y),
-	KEY(2, 5, KEY_N),
-	KEY(2, 6, KEY_J),
-	KEY(2, 7, KEY_U),
-	KEY(2, 8, KEY_M),
-	KEY(2, 9, KEY_K),
-	KEY(2, 10, KEY_I),
-	KEY(2, 11, KEY_RIGHT),
-
-	KEY(3, 0, KEY_F4),
-	KEY(3, 1, KEY_ENTER),
-	KEY(3, 3, KEY_DOT),
-	KEY(3, 4, KEY_L),
-	KEY(3, 5, KEY_O),
-	KEY(3, 6, KEY_LEFTALT),
-	KEY(3, 7, KEY_ENTER),
-	KEY(3, 8, KEY_BACKSPACE),
-	KEY(3, 9, KEY_P),
-	KEY(3, 10, KEY_B),
-	KEY(3, 11, KEY_FN),
-};
-
-const struct matrix_keymap_data palmtc_keymap_data = {
-	.keymap			= palmtc_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(palmtc_matrix_keys),
-};
-
-static const unsigned int palmtc_keypad_row_gpios[] = {
-	0, 9, 10, 11
-};
-
-static const unsigned int palmtc_keypad_col_gpios[] = {
-	18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
-};
-
-static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
-	.keymap_data	= &palmtc_keymap_data,
-	.row_gpios	= palmtc_keypad_row_gpios,
-	.num_row_gpios	= ARRAY_SIZE(palmtc_keypad_row_gpios),
-	.col_gpios	= palmtc_keypad_col_gpios,
-	.num_col_gpios	= ARRAY_SIZE(palmtc_keypad_col_gpios),
-	.active_low	= 1,
-
-	.debounce_ms		= 20,
-	.col_scan_delay_us	= 5,
-};
-
-static struct platform_device palmtc_keyboard = {
-	.name	= "matrix-keypad",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmtc_keypad_platform_data,
-	},
-};
-static void __init palmtc_mkp_init(void)
-{
-	platform_device_register(&palmtc_keyboard);
-}
-#else
-static inline void palmtc_mkp_init(void) {}
-#endif
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
-static struct gpiod_lookup_table palmtc_udc_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_USB_DETECT_N,
-			    "vbus", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_USB_POWER,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device palmtc_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-static void __init palmtc_udc_init(void)
-{
-	gpiod_add_lookup_table(&palmtc_udc_gpiod_table);
-	platform_device_register(&palmtc_gpio_vbus);
-};
-#else
-static inline void palmtc_udc_init(void) {}
-#endif
-
-/******************************************************************************
- * Touchscreen / Battery / GPIO-extender
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static struct platform_device palmtc_ucb1400_device = {
-	.name	= "ucb1400_core",
-	.id	= -1,
-};
-
-static void __init palmtc_ts_init(void)
-{
-	pxa_set_ac97_info(NULL);
-	platform_device_register(&palmtc_ucb1400_device);
-}
-#else
-static inline void palmtc_ts_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led palmtc_gpio_leds[] = {
-{
-	.name			= "palmtc:green:user",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMTC_LED_POWER,
-	.active_low		= 1,
-}, {
-	.name			= "palmtc:vibra:vibra",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMTC_VIBRA_POWER,
-	.active_low		= 1,
-}
-
-};
-
-static struct gpio_led_platform_data palmtc_gpio_led_info = {
-	.leds		= palmtc_gpio_leds,
-	.num_leds	= ARRAY_SIZE(palmtc_gpio_leds),
-};
-
-static struct platform_device palmtc_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmtc_gpio_led_info,
-	}
-};
-
-static void __init palmtc_leds_init(void)
-{
-	platform_device_register(&palmtc_leds);
-}
-#else
-static inline void palmtc_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct resource palmtc_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_16M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct mtd_partition palmtc_flash_parts[] = {
-	{
-		.name	= "U-Boot Bootloader",
-		.offset	= 0x0,
-		.size	= 0x40000,
-	},
-	{
-		.name	= "Linux Kernel",
-		.offset	= 0x40000,
-		.size	= 0x2c0000,
-	},
-	{
-		.name	= "Filesystem",
-		.offset	= 0x300000,
-		.size	= 0xcc0000,
-	},
-	{
-		.name	= "U-Boot Environment",
-		.offset	= 0xfc0000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data palmtc_flash_data = {
-	.width		= 4,
-	.parts		= palmtc_flash_parts,
-	.nr_parts	= ARRAY_SIZE(palmtc_flash_parts),
-};
-
-static struct platform_device palmtc_flash = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= &palmtc_flash_resource,
-	.num_resources	= 1,
-	.dev = {
-		.platform_data	= &palmtc_flash_data,
-	},
-};
-
-static void __init palmtc_nor_init(void)
-{
-	platform_device_register(&palmtc_flash);
-}
-#else
-static inline void palmtc_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info palmtc_lcd_modes[] = {
-	{
-		.pixclock	= 115384,
-		.xres		= 320,
-		.yres		= 320,
-		.bpp		= 16,
-
-		.left_margin	= 27,
-		.right_margin	= 7,
-		.upper_margin	= 7,
-		.lower_margin	= 8,
-
-		.hsync_len	= 6,
-		.vsync_len	= 1,
-	},
-};
-
-static struct pxafb_mach_info palmtc_lcd_screen = {
-	.modes			= palmtc_lcd_modes,
-	.num_modes		= ARRAY_SIZE(palmtc_lcd_modes),
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init palmtc_lcd_init(void)
-{
-	pxa_set_fb_info(NULL, &palmtc_lcd_screen);
-}
-#else
-static inline void palmtc_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init palmtc_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_hwuart_info(NULL);
-
-	palmtc_mmc_init();
-	palmtc_keys_init();
-	palmtc_pwm_init();
-	palmtc_irda_init();
-	palmtc_mkp_init();
-	palmtc_udc_init();
-	palmtc_ts_init();
-	palmtc_nor_init();
-	palmtc_lcd_init();
-	palmtc_leds_init();
-};
-
-MACHINE_START(PALMTC, "Palm Tungsten|C")
-	.atag_offset 	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmtc_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtc.h b/arch/arm/mach-pxa/palmtc.h
deleted file mode 100644
index 9257a02c46e5..000000000000
--- a/arch/arm/mach-pxa/palmtc.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/include/asm-arm/arch-pxa/palmtc-gpio.h
- *
- * GPIOs and interrupts for Palm Tungsten|C Handheld Computer
- *
- * Authors:	Alex Osborne <bobofdoom@gmail.com>
- *		Marek Vasut <marek.vasut@gmail.com>
- *		Holger Bocklet <bitz.email@gmx.net>
- */
-
-#ifndef _INCLUDE_PALMTC_H_
-#define _INCLUDE_PALMTC_H_
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMTC_EARPHONE_DETECT	2
-#define GPIO_NR_PALMTC_CRADLE_DETECT	5
-#define GPIO_NR_PALMTC_HOTSYNC_BUTTON	7
-
-/* SD/MMC */
-#define GPIO_NR_PALMTC_SD_DETECT_N	12
-#define GPIO_NR_PALMTC_SD_POWER		32
-#define GPIO_NR_PALMTC_SD_READONLY	54
-
-/* WLAN */
-#define GPIO_NR_PALMTC_PCMCIA_READY	13
-#define GPIO_NR_PALMTC_PCMCIA_PWRREADY	14
-#define GPIO_NR_PALMTC_PCMCIA_POWER1	15
-#define GPIO_NR_PALMTC_PCMCIA_POWER2	33
-#define GPIO_NR_PALMTC_PCMCIA_POWER3	55
-#define GPIO_NR_PALMTC_PCMCIA_RESET	78
-
-/* UDC */
-#define GPIO_NR_PALMTC_USB_DETECT_N	4
-#define GPIO_NR_PALMTC_USB_POWER	36
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMTC_BL_POWER		16
-#define GPIO_NR_PALMTC_LCD_POWER	44
-#define GPIO_NR_PALMTC_LCD_BLANK	38
-
-/* UART */
-#define GPIO_NR_PALMTC_RS232_POWER	37
-
-/* IRDA */
-#define GPIO_NR_PALMTC_IR_DISABLE	45
-
-/* IRQs */
-#define IRQ_GPIO_PALMTC_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_SD_DETECT_N)
-#define IRQ_GPIO_PALMTC_WLAN_READY	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_WLAN_READY)
-
-/* UCB1400 GPIOs */
-#define GPIO_NR_PALMTC_POWER_DETECT	(0x80 | 0x00)
-#define GPIO_NR_PALMTC_HEADPHONE_DETECT	(0x80 | 0x01)
-#define GPIO_NR_PALMTC_SPEAKER_ENABLE	(0x80 | 0x03)
-#define GPIO_NR_PALMTC_VIBRA_POWER	(0x80 | 0x05)
-#define GPIO_NR_PALMTC_LED_POWER	(0x80 | 0x07)
-
-/** HERE ARE INIT VALUES **/
-#define PALMTC_UCB1400_GPIO_OFFSET	0x80
-
-/* BATTERY */
-#define PALMTC_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
-#define PALMTC_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
-#define PALMTC_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMTC_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMTC_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMTC_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMTC_MAX_LIFE_MINS		240	/* on-life in minutes */
-
-#define PALMTC_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMTC_MAX_INTENSITY		0xFE
-#define PALMTC_DEFAULT_INTENSITY	0x7E
-#define PALMTC_LIMIT_MASK		0x7F
-#define PALMTC_PRESCALER		0x3F
-#define PALMTC_PERIOD_NS		3500
-
-#endif
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
deleted file mode 100644
index fedac670a8af..000000000000
--- a/arch/arm/mach-pxa/palmte2.c
+++ /dev/null
@@ -1,383 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for Palm Tungsten|E2
- *
- * Author:
- *	Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
- *
- * Rewrite for mainline:
- *	Marek Vasut <marek.vasut@gmail.com>
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio/machine.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa25x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "palmte2.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include "udc.h"
-#include <linux/platform_data/asoc-palm27x.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmte2_pin_config[] __initdata = {
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-	GPIO10_GPIO,	/* SD detect */
-	GPIO55_GPIO,	/* SD power */
-	GPIO51_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO15_GPIO,	/* usb detect */
-	GPIO53_GPIO,	/* usb power */
-
-	/* IrDA */
-	GPIO48_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* GPIO KEYS */
-	GPIO5_GPIO,	/* notes */
-	GPIO7_GPIO,	/* tasks */
-	GPIO11_GPIO,	/* calendar */
-	GPIO13_GPIO,	/* contacts */
-	GPIO14_GPIO,	/* center */
-	GPIO19_GPIO,	/* left */
-	GPIO20_GPIO,	/* right */
-	GPIO21_GPIO,	/* down */
-	GPIO22_GPIO,	/* up */
-
-	/* MISC */
-	GPIO1_RST,	/* reset */
-	GPIO4_GPIO,	/* Hotsync button */
-	GPIO9_GPIO,	/* power detect */
-	GPIO15_GPIO,	/* earphone detect */
-	GPIO37_GPIO,	/* LCD power */
-	GPIO56_GPIO,	/* Backlight power */
-};
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmte2_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table palmte2_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_SD_POWER,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-static struct gpio_keys_button palmte2_pxa_buttons[] = {
-	{KEY_F1,	GPIO_NR_PALMTE2_KEY_CONTACTS,	1, "Contacts" },
-	{KEY_F2,	GPIO_NR_PALMTE2_KEY_CALENDAR,	1, "Calendar" },
-	{KEY_F3,	GPIO_NR_PALMTE2_KEY_TASKS,	1, "Tasks" },
-	{KEY_F4,	GPIO_NR_PALMTE2_KEY_NOTES,	1, "Notes" },
-	{KEY_ENTER,	GPIO_NR_PALMTE2_KEY_CENTER,	1, "Center" },
-	{KEY_LEFT,	GPIO_NR_PALMTE2_KEY_LEFT,	1, "Left" },
-	{KEY_RIGHT,	GPIO_NR_PALMTE2_KEY_RIGHT,	1, "Right" },
-	{KEY_DOWN,	GPIO_NR_PALMTE2_KEY_DOWN,	1, "Down" },
-	{KEY_UP,	GPIO_NR_PALMTE2_KEY_UP,		1, "Up" },
-};
-
-static struct gpio_keys_platform_data palmte2_pxa_keys_data = {
-	.buttons	= palmte2_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmte2_pxa_buttons),
-};
-
-static struct platform_device palmte2_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmte2_pxa_keys_data,
-	},
-};
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static struct pwm_lookup palmte2_pwm_lookup[] = {
-	PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL,
-		   PALMTE2_PERIOD_NS, PWM_POLARITY_NORMAL),
-};
-
-static struct gpio palmte_bl_gpios[] = {
-	{ GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
-	{ GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
-};
-
-static int palmte2_backlight_init(struct device *dev)
-{
-	return gpio_request_array(ARRAY_AND_SIZE(palmte_bl_gpios));
-}
-
-static int palmte2_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness);
-	gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness);
-	return brightness;
-}
-
-static void palmte2_backlight_exit(struct device *dev)
-{
-	gpio_free_array(ARRAY_AND_SIZE(palmte_bl_gpios));
-}
-
-static struct platform_pwm_backlight_data palmte2_backlight_data = {
-	.max_brightness	= PALMTE2_MAX_INTENSITY,
-	.dft_brightness	= PALMTE2_MAX_INTENSITY,
-	.init		= palmte2_backlight_init,
-	.notify		= palmte2_backlight_notify,
-	.exit		= palmte2_backlight_exit,
-};
-
-static struct platform_device palmte2_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa25x_device_pwm0.dev,
-		.platform_data	= &palmte2_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmte2_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMTE2_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpiod_lookup_table palmte2_udc_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_USB_DETECT_N,
-			    "vbus", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_USB_PULLUP,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device palmte2_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMTE2_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_PALMTE2_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	return 0;
-
-err2:
-	gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int palmte2_is_ac_online(void)
-{
-	return gpio_get_value(GPIO_NR_PALMTE2_POWER_DETECT);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
-}
-
-static char *palmte2_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = palmte2_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = palmte2_supplicants,
-	.num_supplicants = ARRAY_SIZE(palmte2_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
-
-/******************************************************************************
- * WM97xx audio, battery
- ******************************************************************************/
-static struct wm97xx_batt_pdata palmte2_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.max_voltage	= PALMTE2_BAT_MAX_VOLTAGE,
-	.min_voltage	= PALMTE2_BAT_MIN_VOLTAGE,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-static struct wm97xx_pdata palmte2_wm97xx_pdata = {
-	.batt_pdata	= &palmte2_batt_pdata,
-};
-
-static pxa2xx_audio_ops_t palmte2_ac97_pdata = {
-	.codec_pdata	= { &palmte2_wm97xx_pdata, },
-};
-
-static struct palm27x_asoc_info palmte2_asoc_pdata = {
-	.jack_gpio	= GPIO_NR_PALMTE2_EARPHONE_DETECT,
-};
-
-static struct platform_device palmte2_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palmte2_asoc_pdata,
-	},
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmte2_lcd_modes[] = {
-{
-	.pixclock	= 77757,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 28,
-	.right_margin	= 7,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-},
-};
-
-static struct pxafb_mach_info palmte2_lcd_screen = {
-	.modes		= palmte2_lcd_modes,
-	.num_modes	= ARRAY_SIZE(palmte2_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-	&palmte2_pxa_keys,
-#endif
-	&palmte2_backlight,
-	&power_supply,
-	&palmte2_asoc,
-	&palmte2_gpio_vbus,
-};
-
-/* setup udc GPIOs initial state */
-static void __init palmte2_udc_init(void)
-{
-	if (!gpio_request(GPIO_NR_PALMTE2_USB_PULLUP, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMTE2_USB_PULLUP, 1);
-		gpio_free(GPIO_NR_PALMTE2_USB_PULLUP);
-	}
-}
-
-static void __init palmte2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_fb_info(NULL, &palmte2_lcd_screen);
-	gpiod_add_lookup_table(&palmte2_mci_gpio_table);
-	pxa_set_mci_info(&palmte2_mci_platform_data);
-	palmte2_udc_init();
-	pxa_set_ac97_info(&palmte2_ac97_pdata);
-	pxa_set_ficp_info(&palmte2_ficp_platform_data);
-
-	pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup));
-	gpiod_add_lookup_table(&palmte2_udc_gpiod_table);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(PALMTE2, "Palm Tungsten|E2")
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmte2_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/palmte2.h b/arch/arm/mach-pxa/palmte2.h
deleted file mode 100644
index 2589400c1a2f..000000000000
--- a/arch/arm/mach-pxa/palmte2.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Palm Tungsten|E2 Handheld Computer
- *
- * Author:
- *		Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
- */
-
-#ifndef _INCLUDE_PALMTE2_H_
-#define _INCLUDE_PALMTE2_H_
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMTE2_POWER_DETECT		9
-#define GPIO_NR_PALMTE2_HOTSYNC_BUTTON_N	4
-#define GPIO_NR_PALMTE2_EARPHONE_DETECT		15
-
-/* SD/MMC */
-#define GPIO_NR_PALMTE2_SD_DETECT_N		10
-#define GPIO_NR_PALMTE2_SD_POWER		55
-#define GPIO_NR_PALMTE2_SD_READONLY		51
-
-/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMTE2_IR_DISABLE		48
-
-/* USB */
-#define GPIO_NR_PALMTE2_USB_DETECT_N		35
-#define GPIO_NR_PALMTE2_USB_PULLUP		53
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMTE2_BL_POWER		56
-#define GPIO_NR_PALMTE2_LCD_POWER		37
-
-/* KEYS */
-#define GPIO_NR_PALMTE2_KEY_NOTES	5
-#define GPIO_NR_PALMTE2_KEY_TASKS	7
-#define GPIO_NR_PALMTE2_KEY_CALENDAR	11
-#define GPIO_NR_PALMTE2_KEY_CONTACTS	13
-#define GPIO_NR_PALMTE2_KEY_CENTER	14
-#define GPIO_NR_PALMTE2_KEY_LEFT	19
-#define GPIO_NR_PALMTE2_KEY_RIGHT	20
-#define GPIO_NR_PALMTE2_KEY_DOWN	21
-#define GPIO_NR_PALMTE2_KEY_UP		22
-
-/** HERE ARE INIT VALUES **/
-
-/* BACKLIGHT */
-#define PALMTE2_MAX_INTENSITY		0xFE
-#define PALMTE2_DEFAULT_INTENSITY	0x7E
-#define PALMTE2_LIMIT_MASK		0x7F
-#define PALMTE2_PRESCALER		0x3F
-#define PALMTE2_PERIOD_NS		3500
-
-/* BATTERY */
-#define PALMTE2_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMTE2_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMTE2_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMTE2_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMTE2_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMTE2_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMTE2_MAX_LIFE_MINS		360	/* on-life in minutes */
-
-#endif
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
deleted file mode 100644
index 238a31f32cba..000000000000
--- a/arch/arm/mach-pxa/palmtreo.c
+++ /dev/null
@@ -1,548 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for Palm Treo smartphones
- *
- * currently supported:
- *     Palm Treo 680 (GSM)
- *     Palm Centro 685 (GSM)
- *
- * Author:     Tomas Cech <sleep_walker@suse.cz>
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/memblock.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/power_supply.h>
-#include <linux/w1-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include "pxa27x-udc.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "palmtreo.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "udc.h"
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include "pxa2xx-regs.h"
-#include <linux/platform_data/asoc-palm27x.h>
-#include <linux/platform_data/media/camera-pxa.h>
-#include "palm27x.h"
-
-#include <sound/pxa2xx-lib.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long treo_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO113_GPIO,				/* SD detect */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,	/* usb detect */
-
-	/* MATRIX KEYPAD */
-	GPIO101_KP_MKIN_1,
-	GPIO102_KP_MKIN_2,
-	GPIO97_KP_MKIN_3,
-	GPIO98_KP_MKIN_4,
-	GPIO91_KP_MKIN_6,
-	GPIO13_KP_MKIN_7,
-	GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-	GPIO96_KP_MKOUT_6,
-	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,	/* Hotsync button */
-
-	/* Quick Capture Interface */
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO81_CIF_DD_0,
-	GPIO55_CIF_DD_1,
-	GPIO51_CIF_DD_2,
-	GPIO50_CIF_DD_3,
-	GPIO52_CIF_DD_4,
-	GPIO48_CIF_DD_5,
-	GPIO17_CIF_DD_6,
-	GPIO12_CIF_DD_7,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* GSM */
-	GPIO14_GPIO | WAKEUP_ON_EDGE_BOTH,	/* GSM host wake up */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO39_FFUART_TXD,
-	GPIO41_FFUART_RTS,
-
-	/* MISC. */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* external power detect */
-	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,	/* silent switch */
-	GPIO116_GPIO,				/* headphone detect */
-	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* bluetooth host wake up */
-};
-
-#ifdef CONFIG_MACH_TREO680
-static unsigned long treo680_pin_config[] __initdata = {
-	GPIO33_GPIO,    /* SD read only */
-
-	/* MATRIX KEYPAD - different wake up source */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO99_KP_MKIN_5,
-
-	/* LCD... L_BIAS alt fn not configured on Treo680; is GPIO instead */
-	GPIOxx_LCD_16BPP,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static unsigned long centro685_pin_config[] __initdata = {
-	/* Bluetooth attached to BT UART*/
-	MFP_CFG_OUT(GPIO80, AF0, DRIVE_LOW),    /* power: LOW = off */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* MATRIX KEYPAD - different wake up source */
-	GPIO100_KP_MKIN_0,
-	GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-};
-#endif /* CONFIG_MACH_CENTRO */
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if IS_ENABLED(CONFIG_KEYBOARD_PXA27x)
-static const unsigned int treo680_matrix_keys[] = {
-	KEY(0, 0, KEY_F8),		/* Red/Off/Power */
-	KEY(0, 1, KEY_LEFT),
-	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
-	KEY(0, 3, KEY_L),
-	KEY(0, 4, KEY_A),
-	KEY(0, 5, KEY_Q),
-	KEY(0, 6, KEY_P),
-
-	KEY(1, 0, KEY_RIGHTCTRL),	/* Menu */
-	KEY(1, 1, KEY_RIGHT),
-	KEY(1, 2, KEY_LEFTSHIFT),	/* Left shift */
-	KEY(1, 3, KEY_Z),
-	KEY(1, 4, KEY_S),
-	KEY(1, 5, KEY_W),
-
-	KEY(2, 0, KEY_F1),		/* Phone */
-	KEY(2, 1, KEY_UP),
-	KEY(2, 2, KEY_0),
-	KEY(2, 3, KEY_X),
-	KEY(2, 4, KEY_D),
-	KEY(2, 5, KEY_E),
-
-	KEY(3, 0, KEY_F10),		/* Calendar */
-	KEY(3, 1, KEY_DOWN),
-	KEY(3, 2, KEY_SPACE),
-	KEY(3, 3, KEY_C),
-	KEY(3, 4, KEY_F),
-	KEY(3, 5, KEY_R),
-
-	KEY(4, 0, KEY_F12),		/* Mail */
-	KEY(4, 1, KEY_KPENTER),
-	KEY(4, 2, KEY_RIGHTALT),	/* Alt */
-	KEY(4, 3, KEY_V),
-	KEY(4, 4, KEY_G),
-	KEY(4, 5, KEY_T),
-
-	KEY(5, 0, KEY_F9),		/* Home */
-	KEY(5, 1, KEY_PAGEUP),		/* Side up */
-	KEY(5, 2, KEY_DOT),
-	KEY(5, 3, KEY_B),
-	KEY(5, 4, KEY_H),
-	KEY(5, 5, KEY_Y),
-
-	KEY(6, 0, KEY_TAB),		/* Side Activate */
-	KEY(6, 1, KEY_PAGEDOWN),	/* Side down */
-	KEY(6, 2, KEY_ENTER),
-	KEY(6, 3, KEY_N),
-	KEY(6, 4, KEY_J),
-	KEY(6, 5, KEY_U),
-
-	KEY(7, 0, KEY_F6),		/* Green/Call */
-	KEY(7, 1, KEY_O),
-	KEY(7, 2, KEY_BACKSPACE),
-	KEY(7, 3, KEY_M),
-	KEY(7, 4, KEY_K),
-	KEY(7, 5, KEY_I),
-};
-
-static const unsigned int centro_matrix_keys[] = {
-	KEY(0, 0, KEY_F9),		/* Home */
-	KEY(0, 1, KEY_LEFT),
-	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
-	KEY(0, 3, KEY_L),
-	KEY(0, 4, KEY_A),
-	KEY(0, 5, KEY_Q),
-	KEY(0, 6, KEY_P),
-
-	KEY(1, 0, KEY_RIGHTCTRL),	/* Menu */
-	KEY(1, 1, KEY_RIGHT),
-	KEY(1, 2, KEY_LEFTSHIFT),	/* Left shift */
-	KEY(1, 3, KEY_Z),
-	KEY(1, 4, KEY_S),
-	KEY(1, 5, KEY_W),
-
-	KEY(2, 0, KEY_F1),		/* Phone */
-	KEY(2, 1, KEY_UP),
-	KEY(2, 2, KEY_0),
-	KEY(2, 3, KEY_X),
-	KEY(2, 4, KEY_D),
-	KEY(2, 5, KEY_E),
-
-	KEY(3, 0, KEY_F10),		/* Calendar */
-	KEY(3, 1, KEY_DOWN),
-	KEY(3, 2, KEY_SPACE),
-	KEY(3, 3, KEY_C),
-	KEY(3, 4, KEY_F),
-	KEY(3, 5, KEY_R),
-
-	KEY(4, 0, KEY_F12),		/* Mail */
-	KEY(4, 1, KEY_KPENTER),
-	KEY(4, 2, KEY_RIGHTALT),	/* Alt */
-	KEY(4, 3, KEY_V),
-	KEY(4, 4, KEY_G),
-	KEY(4, 5, KEY_T),
-
-	KEY(5, 0, KEY_F8),		/* Red/Off/Power */
-	KEY(5, 1, KEY_PAGEUP),		/* Side up */
-	KEY(5, 2, KEY_DOT),
-	KEY(5, 3, KEY_B),
-	KEY(5, 4, KEY_H),
-	KEY(5, 5, KEY_Y),
-
-	KEY(6, 0, KEY_TAB),		/* Side Activate */
-	KEY(6, 1, KEY_PAGEDOWN),	/* Side down */
-	KEY(6, 2, KEY_ENTER),
-	KEY(6, 3, KEY_N),
-	KEY(6, 4, KEY_J),
-	KEY(6, 5, KEY_U),
-
-	KEY(7, 0, KEY_F6),		/* Green/Call */
-	KEY(7, 1, KEY_O),
-	KEY(7, 2, KEY_BACKSPACE),
-	KEY(7, 3, KEY_M),
-	KEY(7, 4, KEY_K),
-	KEY(7, 5, KEY_I),
-};
-
-static struct matrix_keymap_data treo680_matrix_keymap_data = {
-	.keymap			= treo680_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(treo680_matrix_keys),
-};
-
-static struct matrix_keymap_data centro_matrix_keymap_data = {
-	.keymap			= centro_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(centro_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data treo680_keypad_pdata = {
-	.matrix_key_rows	= 8,
-	.matrix_key_cols	= 7,
-	.matrix_keymap_data	= &treo680_matrix_keymap_data,
-	.direct_key_map		= { KEY_CONNECT },
-	.direct_key_num		= 1,
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmtreo_kpc_init(void)
-{
-	static struct pxa27x_keypad_platform_data *data = &treo680_keypad_pdata;
-
-	if (machine_is_centro())
-		data->matrix_keymap_data = &centro_matrix_keymap_data;
-
-	pxa_set_keypad_info(&treo680_keypad_pdata);
-}
-#else
-static inline void palmtreo_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB host
- ******************************************************************************/
-#if IS_ENABLED(CONFIG_USB_OHCI_HCD)
-static struct pxaohci_platform_data treo680_ohci_info = {
-	.port_mode    = PMM_PERPORT_MODE,
-	.flags        = ENABLE_PORT1 | ENABLE_PORT3,
-	.power_budget = 0,
-};
-
-static void __init palmtreo_uhc_init(void)
-{
-	if (machine_is_treo680())
-		pxa_set_ohci_info(&treo680_ohci_info);
-}
-#else
-static inline void palmtreo_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * Vibra and LEDs
- ******************************************************************************/
-static struct gpio_led treo680_gpio_leds[] = {
-	{
-		.name			= "treo680:vibra:vibra",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_TREO680_VIBRATE_EN,
-	},
-	{
-		.name			= "treo680:green:led",
-		.default_trigger	= "mmc0",
-		.gpio			= GPIO_NR_TREO_GREEN_LED,
-	},
-	{
-		.name			= "treo680:white:keybbl",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_TREO680_KEYB_BL,
-	},
-};
-
-static struct gpio_led_platform_data treo680_gpio_led_info = {
-	.leds		= treo680_gpio_leds,
-	.num_leds	= ARRAY_SIZE(treo680_gpio_leds),
-};
-
-static struct gpio_led centro_gpio_leds[] = {
-	{
-		.name			= "centro:vibra:vibra",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_CENTRO_VIBRATE_EN,
-	},
-	{
-		.name			= "centro:green:led",
-		.default_trigger	= "mmc0",
-		.gpio			= GPIO_NR_TREO_GREEN_LED,
-	},
-	{
-		.name			= "centro:white:keybbl",
-		.default_trigger	= "none",
-		.active_low		= 1,
-		.gpio			= GPIO_NR_CENTRO_KEYB_BL,
-	},
-};
-
-static struct gpio_led_platform_data centro_gpio_led_info = {
-	.leds		= centro_gpio_leds,
-	.num_leds	= ARRAY_SIZE(centro_gpio_leds),
-};
-
-static struct platform_device palmtreo_leds = {
-	.name   = "leds-gpio",
-	.id     = -1,
-};
-
-static void __init palmtreo_leds_init(void)
-{
-	if (machine_is_centro())
-		palmtreo_leds.dev.platform_data = &centro_gpio_led_info;
-	else if (machine_is_treo680())
-		palmtreo_leds.dev.platform_data = &treo680_gpio_led_info;
-
-	platform_device_register(&palmtreo_leds);
-}
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init treo_reserve(void)
-{
-	memblock_reserve(0xa0000000, 0x1000);
-	memblock_reserve(0xa2000000, 0x1000);
-}
-
-static void __init palmphone_common_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	palm27x_pm_init(TREO_STR_BASE);
-	palm27x_lcd_init(GPIO_NR_TREO_BL_POWER, &palm_320x320_new_lcd_mode);
-	palm27x_udc_init(GPIO_NR_TREO_USB_DETECT, GPIO_NR_TREO_USB_PULLUP, 1);
-	palm27x_irda_init(GPIO_NR_TREO_IR_EN);
-	palm27x_ac97_init(-1, -1, -1, 95);
-	palm27x_pwm_init(GPIO_NR_TREO_BL_POWER, -1);
-	palm27x_power_init(GPIO_NR_TREO_POWER_DETECT, -1);
-	palm27x_pmic_init();
-	palmtreo_kpc_init();
-	palmtreo_uhc_init();
-	palmtreo_leds_init();
-}
-
-#ifdef CONFIG_MACH_TREO680
-void __init treo680_gpio_init(void)
-{
-	unsigned int gpio;
-
-	/* drive all three lcd gpios high initially */
-	const unsigned long lcd_flags = GPIOF_INIT_HIGH | GPIOF_DIR_OUT;
-
-	/*
-	 * LCD GPIO initialization...
-	 */
-
-	/*
-	 * This is likely the power to the lcd.  Toggling it low/high appears to
-	 * turn the lcd off/on.  Can be toggled after lcd is initialized without
-	 * any apparent adverse effects to the lcd operation.  Note that this
-	 * gpio line is used by the lcd controller as the L_BIAS signal, but
-	 * treo680 configures it as gpio.
-	 */
-	gpio = GPIO_NR_TREO680_LCD_POWER;
-	if (gpio_request_one(gpio, lcd_flags, "LCD power") < 0)
-		goto fail;
-
-	/*
-	 * These two are called "enables", for lack of a better understanding.
-	 * If either of these are toggled after the lcd is initialized, the
-	 * image becomes degraded.  N.B. The IPL shipped with the treo
-	 * configures GPIO_NR_TREO680_LCD_EN_N as output and drives it high.  If
-	 * the IPL is ever reprogrammed, this initialization may be need to be
-	 * revisited.
-	 */
-	gpio = GPIO_NR_TREO680_LCD_EN;
-	if (gpio_request_one(gpio, lcd_flags, "LCD enable") < 0)
-		goto fail;
-	gpio = GPIO_NR_TREO680_LCD_EN_N;
-	if (gpio_request_one(gpio, lcd_flags, "LCD enable_n") < 0)
-		goto fail;
-
-	/* driving this low turns LCD on */
-	gpio_set_value(GPIO_NR_TREO680_LCD_EN_N, 0);
-
-	return;
- fail:
-	pr_err("gpio %d initialization failed\n", gpio);
-	gpio_free(GPIO_NR_TREO680_LCD_POWER);
-	gpio_free(GPIO_NR_TREO680_LCD_EN);
-	gpio_free(GPIO_NR_TREO680_LCD_EN_N);
-}
-
-static struct gpiod_lookup_table treo680_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO680_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO680_SD_POWER,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init treo680_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
-	palmphone_common_init();
-	treo680_gpio_init();
-	palm27x_mmc_init(&treo680_mci_gpio_table);
-}
-#endif
-
-#ifdef CONFIG_MACH_CENTRO
-
-static struct gpiod_lookup_table centro685_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_CENTRO_SD_POWER,
-			    "power", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init centro_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
-	palmphone_common_init();
-	palm27x_mmc_init(&centro685_mci_gpio_table);
-}
-#endif
-
-#ifdef CONFIG_MACH_TREO680
-MACHINE_START(TREO680, "Palm Treo 680")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.reserve	= treo_reserve,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = treo680_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_CENTRO
-MACHINE_START(CENTRO, "Palm Centro 685")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.reserve	= treo_reserve,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= centro_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-pxa/palmtreo.h b/arch/arm/mach-pxa/palmtreo.h
deleted file mode 100644
index 5715cd505424..000000000000
--- a/arch/arm/mach-pxa/palmtreo.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Palm Treo smartphones
- *
- * currently supported:
- *     Palm Treo 680 (GSM)
- *     Palm Centro 685 (GSM)
- *
- * Author:     Tomas Cech <sleep_walker@suse.cz>
- *
- * find more info at www.hackndev.com
- */
-
-#ifndef _INCLUDE_TREO_H_
-#define _INCLUDE_TREO_H_
-
-/* GPIOs */
-#define GPIO_NR_TREO_POWER_DETECT	0
-#define GPIO_NR_TREO_AMP_EN		27
-#define GPIO_NR_TREO_GREEN_LED	20
-#define GPIO_NR_TREO_RED_LED		79
-#define GPIO_NR_TREO_SD_DETECT_N	113
-#define GPIO_NR_TREO_EP_DETECT_N	116
-#define GPIO_NR_TREO_USB_DETECT	1
-#define GPIO_NR_TREO_USB_PULLUP	114
-#define GPIO_NR_TREO_GSM_POWER	40
-#define GPIO_NR_TREO_GSM_RESET	87
-#define GPIO_NR_TREO_GSM_WAKE	57
-#define GPIO_NR_TREO_GSM_HOST_WAKE	14
-#define GPIO_NR_TREO_GSM_TRIGGER	10
-#define GPIO_NR_TREO_IR_EN		115
-#define GPIO_NR_TREO_IR_TXD		47
-#define GPIO_NR_TREO_BL_POWER	38
-#define GPIO_NR_TREO_LCD_POWER	25
-
-/* Treo680 specific GPIOs */
-#define GPIO_NR_TREO680_SD_READONLY	33
-#define GPIO_NR_TREO680_SD_POWER	42
-#define GPIO_NR_TREO680_VIBRATE_EN	44
-#define GPIO_NR_TREO680_KEYB_BL		24
-#define GPIO_NR_TREO680_BT_EN		43
-#define GPIO_NR_TREO680_LCD_POWER	77
-#define GPIO_NR_TREO680_LCD_EN		86
-#define GPIO_NR_TREO680_LCD_EN_N	25
-
-/* Centro685 specific GPIOs */
-#define GPIO_NR_CENTRO_SD_POWER		21
-#define GPIO_NR_CENTRO_VIBRATE_EN	22
-#define GPIO_NR_CENTRO_KEYB_BL		33
-#define GPIO_NR_CENTRO_BT_EN		80
-
-/* Various addresses  */
-#define TREO_PHYS_RAM_START	0xa0000000
-#define TREO_PHYS_IO_START	0x40000000
-#define TREO_STR_BASE	0xa2000000
-
-/* BACKLIGHT */
-#define TREO_MAX_INTENSITY		254
-#define TREO_DEFAULT_INTENSITY	160
-#define TREO_LIMIT_MASK		0x7F
-#define TREO_PRESCALER		63
-#define TREO_PERIOD_NS		3500
-
-#endif
diff --git a/arch/arm/mach-pxa/palmtx-pcmcia.c b/arch/arm/mach-pxa/palmtx-pcmcia.c
deleted file mode 100644
index 8c2aaad93043..000000000000
--- a/arch/arm/mach-pxa/palmtx-pcmcia.c
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_palmtx.c
- *
- * Driver for Palm T|X PCMCIA
- *
- * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include "palmtx.h"
-#include <pcmcia/soc_common.h>
-
-static struct gpio palmtx_pcmcia_gpios[] = {
-	{ GPIO_NR_PALMTX_PCMCIA_POWER1,	GPIOF_INIT_LOW,	"PCMCIA Power 1" },
-	{ GPIO_NR_PALMTX_PCMCIA_POWER2,	GPIOF_INIT_LOW,	"PCMCIA Power 2" },
-	{ GPIO_NR_PALMTX_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
-};
-
-static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(palmtx_pcmcia_gpios,
-				ARRAY_SIZE(palmtx_pcmcia_gpios));
-
-	skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMTX_PCMCIA_READY;
-	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-
-	return ret;
-}
-
-static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(palmtx_pcmcia_gpios, ARRAY_SIZE(palmtx_pcmcia_gpios));
-}
-
-static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->detect = 1; /* always inserted */
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int
-palmtx_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	gpio_set_value(GPIO_NR_PALMTX_PCMCIA_POWER1, 1);
-	gpio_set_value(GPIO_NR_PALMTX_PCMCIA_POWER2, 1);
-	gpio_set_value(GPIO_NR_PALMTX_PCMCIA_RESET,
-			!!(state->flags & SS_RESET));
-
-	return 0;
-}
-
-static struct pcmcia_low_level palmtx_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 0,
-	.nr			= 1,
-
-	.hw_init		= palmtx_pcmcia_hw_init,
-	.hw_shutdown		= palmtx_pcmcia_hw_shutdown,
-
-	.socket_state		= palmtx_pcmcia_socket_state,
-	.configure_socket	= palmtx_pcmcia_configure_socket,
-};
-
-static struct platform_device *palmtx_pcmcia_device;
-
-static int __init palmtx_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_palmtx())
-		return -ENODEV;
-
-	palmtx_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!palmtx_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(palmtx_pcmcia_device, &palmtx_pcmcia_ops,
-					sizeof(palmtx_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(palmtx_pcmcia_device);
-
-	if (ret)
-		platform_device_put(palmtx_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit palmtx_pcmcia_exit(void)
-{
-	platform_device_unregister(palmtx_pcmcia_device);
-}
-
-module_init(palmtx_pcmcia_init);
-module_exit(palmtx_pcmcia_exit);
-
-MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Palm T|X");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
deleted file mode 100644
index c0d0762540ab..000000000000
--- a/arch/arm/mach-pxa/palmtx.c
+++ /dev/null
@@ -1,390 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for PalmTX
- *
- * Author:     Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Alex Osborne <ato@meshy.org>
- *		Cristiano P. <cristianop@users.sourceforge.net>
- *		Jan Herman <2hp@seznam.cz>
- *		Michal Hrusecky
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "palmtx.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "udc.h"
-#include <linux/platform_data/asoc-palm27x.h>
-#include "palm27x.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmtx_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO114_GPIO,	/* SD power */
-	GPIO115_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO40_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO13_GPIO,	/* usb detect */
-	GPIO93_GPIO,	/* usb power */
-
-	/* PCMCIA */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO94_GPIO,	/* wifi power 1 */
-	GPIO108_GPIO,	/* wifi power 2 */
-	GPIO116_GPIO,	/* wifi ready */
-
-	/* MATRIX KEYPAD */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-
-	/* NAND */
-	GPIO15_nCS_1,
-	GPIO18_RDY,
-
-	/* MISC. */
-	GPIO10_GPIO,	/* hotsync button */
-	GPIO12_GPIO,	/* power detect */
-	GPIO107_GPIO,	/* earphone detect */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition palmtx_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data palmtx_flash_data[] = {
-	{
-		.width		= 2,			/* bankwidth in bytes */
-		.parts		= palmtx_partitions,
-		.nr_parts	= ARRAY_SIZE(palmtx_partitions)
-	}
-};
-
-static struct resource palmtx_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_8M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device palmtx_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &palmtx_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = palmtx_flash_data,
-	},
-};
-
-static void __init palmtx_nor_init(void)
-{
-	platform_device_register(&palmtx_flash);
-}
-#else
-static inline void palmtx_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int palmtx_matrix_keys[] = {
-	KEY(0, 0, KEY_POWER),
-	KEY(0, 1, KEY_F1),
-	KEY(0, 2, KEY_ENTER),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_F3),
-	KEY(1, 2, KEY_F4),
-
-	KEY(2, 0, KEY_UP),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_RIGHT),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct matrix_keymap_data palmtx_matrix_keymap_data = {
-	.keymap			= palmtx_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(palmtx_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_keymap_data	= &palmtx_matrix_keymap_data,
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmtx_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmtx_keypad_platform_data);
-}
-#else
-static inline void palmtx_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmtx_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
-};
-
-static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
-	.buttons	= palmtx_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmtx_pxa_buttons),
-};
-
-static struct platform_device palmtx_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmtx_pxa_keys_data,
-	},
-};
-
-static void __init palmtx_keys_init(void)
-{
-	platform_device_register(&palmtx_pxa_keys);
-}
-#else
-static inline void palmtx_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * NAND Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_NAND_PLATFORM) || \
-	defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static void palmtx_nand_cmd_ctl(struct nand_chip *this, int cmd,
-				unsigned int ctrl)
-{
-	char __iomem *nandaddr = this->legacy.IO_ADDR_W;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		writeb(cmd, PALMTX_NAND_CLE_VIRT);
-	else if (ctrl & NAND_ALE)
-		writeb(cmd, PALMTX_NAND_ALE_VIRT);
-	else
-		writeb(cmd, nandaddr);
-}
-
-static struct mtd_partition palmtx_partition_info[] = {
-	[0] = {
-		.name	= "palmtx-0",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL
-	},
-};
-
-struct platform_nand_data palmtx_nand_platdata = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.nr_partitions		= ARRAY_SIZE(palmtx_partition_info),
-		.partitions		= palmtx_partition_info,
-		.chip_delay		= 20,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= palmtx_nand_cmd_ctl,
-	},
-};
-
-static struct resource palmtx_nand_resource[] = {
-	[0]	= {
-		.start	= PXA_CS1_PHYS,
-		.end	= PXA_CS1_PHYS + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device palmtx_nand = {
-	.name		= "gen_nand",
-	.num_resources	= ARRAY_SIZE(palmtx_nand_resource),
-	.resource	= palmtx_nand_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &palmtx_nand_platdata,
-	}
-};
-
-static void __init palmtx_nand_init(void)
-{
-	platform_device_register(&palmtx_nand);
-}
-#else
-static inline void palmtx_nand_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static struct map_desc palmtx_io_desc[] __initdata = {
-{
-	.virtual	= (unsigned long)PALMTX_PCMCIA_VIRT,
-	.pfn		= __phys_to_pfn(PALMTX_PCMCIA_PHYS),
-	.length		= PALMTX_PCMCIA_SIZE,
-	.type		= MT_DEVICE,
-}, {
-	.virtual	= (unsigned long)PALMTX_NAND_ALE_VIRT,
-	.pfn		= __phys_to_pfn(PALMTX_NAND_ALE_PHYS),
-	.length		= SZ_1M,
-	.type		= MT_DEVICE,
-}, {
-	.virtual	= (unsigned long)PALMTX_NAND_CLE_VIRT,
-	.pfn		= __phys_to_pfn(PALMTX_NAND_CLE_PHYS),
-	.length		= SZ_1M,
-	.type		= MT_DEVICE,
-}
-};
-
-static void __init palmtx_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
-}
-
-static struct gpiod_lookup_table palmtx_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTX_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTX_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTX_SD_POWER,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table palmtx_wm97xx_touch_gpio_table = {
-	.dev_id = "wm97xx-touch",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", 27, "touch", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init palmtx_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(&palmtx_mci_gpio_table);
-	gpiod_add_lookup_table(&palmtx_wm97xx_touch_gpio_table);
-	palm27x_pm_init(PALMTX_STR_BASE);
-	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
-	palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N,
-			GPIO_NR_PALMTX_USB_PULLUP, 1);
-	palm27x_irda_init(GPIO_NR_PALMTX_IR_DISABLE);
-	palm27x_ac97_init(PALMTX_BAT_MIN_VOLTAGE, PALMTX_BAT_MAX_VOLTAGE,
-			GPIO_NR_PALMTX_EARPHONE_DETECT, 95);
-	palm27x_pwm_init(GPIO_NR_PALMTX_BL_POWER, GPIO_NR_PALMTX_LCD_POWER);
-	palm27x_power_init(GPIO_NR_PALMTX_POWER_DETECT, -1);
-	palm27x_pmic_init();
-	palmtx_kpc_init();
-	palmtx_keys_init();
-	palmtx_nor_init();
-	palmtx_nand_init();
-}
-
-MACHINE_START(PALMTX, "Palm T|X")
-	.atag_offset	= 0x100,
-	.map_io		= palmtx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmtx_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtx.h b/arch/arm/mach-pxa/palmtx.h
deleted file mode 100644
index ec88abf0fc6c..000000000000
--- a/arch/arm/mach-pxa/palmtx.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Palm T|X Handheld Computer
- *
- * Based on palmld-gpio.h by Alex Osborne
- *
- * Authors:	Marek Vasut <marek.vasut@gmail.com>
- *		Cristiano P. <cristianop@users.sourceforge.net>
- *		Jan Herman <2hp@seznam.cz>
- */
-
-#ifndef _INCLUDE_PALMTX_H_
-#define _INCLUDE_PALMTX_H_
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMTX_GPIO_RESET		1
-
-#define GPIO_NR_PALMTX_POWER_DETECT		12 /* 90 */
-#define GPIO_NR_PALMTX_HOTSYNC_BUTTON_N		10
-#define GPIO_NR_PALMTX_EARPHONE_DETECT		107
-
-/* SD/MMC */
-#define GPIO_NR_PALMTX_SD_DETECT_N		14
-#define GPIO_NR_PALMTX_SD_POWER			114 /* probably */
-#define GPIO_NR_PALMTX_SD_READONLY		115 /* probably */
-
-/* TOUCHSCREEN */
-#define GPIO_NR_PALMTX_WM9712_IRQ		27
-
-/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMTX_IR_DISABLE		40
-
-/* USB */
-#define GPIO_NR_PALMTX_USB_DETECT_N		13
-#define GPIO_NR_PALMTX_USB_PULLUP		93
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMTX_BL_POWER			84
-#define GPIO_NR_PALMTX_LCD_POWER		96
-
-/* LCD BORDER */
-#define GPIO_NR_PALMTX_BORDER_SWITCH		98
-#define GPIO_NR_PALMTX_BORDER_SELECT		22
-
-/* BLUETOOTH */
-#define GPIO_NR_PALMTX_BT_POWER			17
-#define GPIO_NR_PALMTX_BT_RESET			83
-
-/* PCMCIA (WiFi) */
-#define GPIO_NR_PALMTX_PCMCIA_POWER1		94
-#define GPIO_NR_PALMTX_PCMCIA_POWER2		108
-#define GPIO_NR_PALMTX_PCMCIA_RESET		79
-#define GPIO_NR_PALMTX_PCMCIA_READY		116
-
-/* NAND Flash ... this GPIO may be incorrect! */
-#define GPIO_NR_PALMTX_NAND_BUFFER_DIR		79
-
-/* INTERRUPTS */
-#define IRQ_GPIO_PALMTX_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_SD_DETECT_N)
-#define IRQ_GPIO_PALMTX_WM9712_IRQ	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_WM9712_IRQ)
-#define IRQ_GPIO_PALMTX_USB_DETECT	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_USB_DETECT)
-#define IRQ_GPIO_PALMTX_GPIO_RESET	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_GPIO_RESET)
-
-/** HERE ARE INIT VALUES **/
-
-/* Various addresses  */
-#define PALMTX_PCMCIA_PHYS	0x28000000
-#define PALMTX_PCMCIA_VIRT	IOMEM(0xf0000000)
-#define PALMTX_PCMCIA_SIZE	0x100000
-
-#define PALMTX_PHYS_RAM_START	0xa0000000
-#define PALMTX_PHYS_IO_START	0x40000000
-
-#define PALMTX_STR_BASE		0xa0200000
-
-#define PALMTX_PHYS_FLASH_START	PXA_CS0_PHYS	/* ChipSelect 0 */
-#define PALMTX_PHYS_NAND_START	PXA_CS1_PHYS	/* ChipSelect 1 */
-
-#define PALMTX_NAND_ALE_PHYS	(PALMTX_PHYS_NAND_START | (1 << 24))
-#define PALMTX_NAND_CLE_PHYS	(PALMTX_PHYS_NAND_START | (1 << 25))
-#define PALMTX_NAND_ALE_VIRT	IOMEM(0xff100000)
-#define PALMTX_NAND_CLE_VIRT	IOMEM(0xff200000)
-
-/* TOUCHSCREEN */
-#define AC97_LINK_FRAME			21
-
-
-/* BATTERY */
-#define PALMTX_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMTX_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMTX_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMTX_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMTX_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMTX_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMTX_MAX_LIFE_MINS		360	/* on-life in minutes */
-
-#define PALMTX_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMTX_MAX_INTENSITY		0xFE
-#define PALMTX_DEFAULT_INTENSITY	0x7E
-#define PALMTX_LIMIT_MASK		0x7F
-#define PALMTX_PRESCALER		0x3F
-#define PALMTX_PERIOD_NS		3500
-
-#endif
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
deleted file mode 100644
index 66e8fe6f1661..000000000000
--- a/arch/arm/mach-pxa/palmz72.c
+++ /dev/null
@@ -1,319 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for Palm Zire72
- *
- * Authors:
- *	Vladimir "Farcaller" Pouzanov <farcaller@gmail.com>
- *	Sergey Lapin <slapin@ossfans.org>
- *	Alex Osborne <bobofdoom@gmail.com>
- *	Jan Herman <2hp@seznam.cz>
- *
- * Rewrite for mainline:
- *	Marek Vasut <marek.vasut@gmail.com>
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/platform_data/i2c-gpio.h>
-#include <linux/gpio/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/suspend.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "palmz72.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "udc.h"
-#include <linux/platform_data/asoc-palm27x.h>
-#include "palm27x.h"
-
-#include "pm.h"
-#include <linux/platform_data/media/camera-pxa.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmz72_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO115_GPIO,	/* SD RO */
-	GPIO98_GPIO,	/* SD power */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO113_AC97_nRESET,
-
-	/* IrDA */
-	GPIO49_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO15_GPIO,	/* usb detect */
-	GPIO95_GPIO,	/* usb pullup */
-
-	/* Matrix keypad */
-	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	GPIO20_GPIO,	/* bl power */
-	GPIO21_GPIO,	/* LCD border switch */
-	GPIO22_GPIO,	/* LCD border color */
-	GPIO96_GPIO,	/* lcd power */
-
-	/* PXA Camera */
-	GPIO81_CIF_DD_0,
-	GPIO48_CIF_DD_5,
-	GPIO50_CIF_DD_3,
-	GPIO51_CIF_DD_2,
-	GPIO52_CIF_DD_4,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO55_CIF_DD_1,
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-	GPIO93_CIF_DD_6,
-	GPIO108_CIF_DD_7,
-
-	GPIO56_GPIO,	/* OV9640 Powerdown */
-	GPIO57_GPIO,	/* OV9640 Reset */
-	GPIO91_GPIO,	/* OV9640 Power */
-
-	/* I2C */
-	GPIO117_GPIO,	/* I2C_SCL */
-	GPIO118_GPIO,	/* I2C_SDA */
-
-	/* Misc. */
-	GPIO0_GPIO	| WAKEUP_ON_LEVEL_HIGH,	/* power detect */
-	GPIO88_GPIO,				/* green led */
-	GPIO27_GPIO,				/* WM9712 IRQ */
-};
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int palmz72_matrix_keys[] = {
-	KEY(0, 0, KEY_POWER),
-	KEY(0, 1, KEY_F1),
-	KEY(0, 2, KEY_ENTER),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_F3),
-	KEY(1, 2, KEY_F4),
-
-	KEY(2, 0, KEY_UP),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_RIGHT),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct matrix_keymap_data almz72_matrix_keymap_data = {
-	.keymap			= palmz72_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(palmz72_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_keymap_data	= &almz72_matrix_keymap_data,
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmz72_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmz72_keypad_platform_data);
-}
-#else
-static inline void palmz72_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "palmz72:green:led",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_PALMZ72_LED_GREEN,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device palmz72_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	}
-};
-
-static void __init palmz72_leds_init(void)
-{
-	platform_device_register(&palmz72_leds);
-}
-#else
-static inline void palmz72_leds_init(void) {}
-#endif
-
-#ifdef CONFIG_PM
-
-/* We have some black magic here
- * PalmOS ROM on recover expects special struct physical address
- * to be transferred via PSPR. Using this struct PalmOS restores
- * its state after sleep. As for Linux, we need to setup it the
- * same way. More than that, PalmOS ROM changes some values in memory.
- * For now only one location is found, which needs special treatment.
- * Thanks to Alex Osborne, Andrzej Zaborowski, and lots of other people
- * for reading backtraces for me :)
- */
-
-#define PALMZ72_SAVE_DWORD ((unsigned long *)0xc0000050)
-
-static struct palmz72_resume_info palmz72_resume_info = {
-	.magic0 = 0xb4e6,
-	.magic1 = 1,
-
-	/* reset state, MMU off etc */
-	.arm_control = 0,
-	.aux_control = 0,
-	.ttb = 0,
-	.domain_access = 0,
-	.process_id = 0,
-};
-
-static unsigned long store_ptr;
-
-/* syscore_ops for Palm Zire 72 PM */
-
-static int palmz72_pm_suspend(void)
-{
-	/* setup the resume_info struct for the original bootloader */
-	palmz72_resume_info.resume_addr = (u32) cpu_resume;
-
-	/* Storing memory touched by ROM */
-	store_ptr = *PALMZ72_SAVE_DWORD;
-
-	/* Setting PSPR to a proper value */
-	PSPR = __pa_symbol(&palmz72_resume_info);
-
-	return 0;
-}
-
-static void palmz72_pm_resume(void)
-{
-	*PALMZ72_SAVE_DWORD = store_ptr;
-}
-
-static struct syscore_ops palmz72_pm_syscore_ops = {
-	.suspend = palmz72_pm_suspend,
-	.resume = palmz72_pm_resume,
-};
-
-static int __init palmz72_pm_init(void)
-{
-	if (machine_is_palmz72()) {
-		register_syscore_ops(&palmz72_pm_syscore_ops);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-device_initcall(palmz72_pm_init);
-#endif
-
-static struct gpiod_lookup_table palmz72_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_RO,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_POWER_N,
-			    "power", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init palmz72_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(&palmz72_mci_gpio_table);
-	palm27x_lcd_init(-1, &palm_320x320_lcd_mode);
-	palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N,
-			GPIO_NR_PALMZ72_USB_PULLUP, 0);
-	palm27x_irda_init(GPIO_NR_PALMZ72_IR_DISABLE);
-	palm27x_ac97_init(PALMZ72_BAT_MIN_VOLTAGE, PALMZ72_BAT_MAX_VOLTAGE,
-			-1, 113);
-	palm27x_pwm_init(-1, -1);
-	palm27x_power_init(-1, -1);
-	palm27x_pmic_init();
-	palmz72_kpc_init();
-	palmz72_leds_init();
-}
-
-MACHINE_START(PALMZ72, "Palm Zire72")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmz72_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/palmz72.h b/arch/arm/mach-pxa/palmz72.h
deleted file mode 100644
index 40f3f9987983..000000000000
--- a/arch/arm/mach-pxa/palmz72.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Palm Zire72 Handheld Computer
- *
- * Authors:	Alex Osborne <bobofdoom@gmail.com>
- *		Jan Herman <2hp@seznam.cz>
- *		Sergey Lapin <slapin@ossfans.org>
- */
-
-#ifndef _INCLUDE_PALMZ72_H_
-#define _INCLUDE_PALMZ72_H_
-
-/* Power and control */
-#define GPIO_NR_PALMZ72_GPIO_RESET		1
-#define GPIO_NR_PALMZ72_POWER_DETECT		0
-
-/* SD/MMC */
-#define GPIO_NR_PALMZ72_SD_DETECT_N		14
-#define GPIO_NR_PALMZ72_SD_POWER_N		98
-#define GPIO_NR_PALMZ72_SD_RO			115
-
-/* Touchscreen */
-#define GPIO_NR_PALMZ72_WM9712_IRQ		27
-
-/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMZ72_IR_DISABLE		49
-
-/* USB */
-#define GPIO_NR_PALMZ72_USB_DETECT_N		15
-#define GPIO_NR_PALMZ72_USB_PULLUP		95
-
-/* LCD/Backlight */
-#define GPIO_NR_PALMZ72_BL_POWER		20
-#define GPIO_NR_PALMZ72_LCD_POWER		96
-
-/* LED */
-#define GPIO_NR_PALMZ72_LED_GREEN		88
-
-/* Bluetooth */
-#define GPIO_NR_PALMZ72_BT_POWER		17
-#define GPIO_NR_PALMZ72_BT_RESET		83
-
-/* Camera */
-#define GPIO_NR_PALMZ72_CAM_PWDN		56
-#define GPIO_NR_PALMZ72_CAM_RESET		57
-#define GPIO_NR_PALMZ72_CAM_POWER		91
-
-/** Initial values **/
-
-/* Battery */
-#define PALMZ72_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMZ72_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMZ72_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMZ72_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMZ72_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMZ72_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMZ72_MAX_LIFE_MINS		360	/* on-life in minutes */
-
-/* Backlight */
-#define PALMZ72_MAX_INTENSITY		0xFE
-#define PALMZ72_DEFAULT_INTENSITY	0x7E
-#define PALMZ72_LIMIT_MASK		0x7F
-#define PALMZ72_PRESCALER		0x3F
-#define PALMZ72_PERIOD_NS		3500
-
-#ifdef CONFIG_PM
-struct palmz72_resume_info {
-	u32 magic0;		/* 0x0 */
-	u32 magic1;		/* 0x4 */
-	u32 resume_addr;	/* 0x8 */
-	u32 pad[11];		/* 0xc..0x37 */
-	u32 arm_control;	/* 0x38 */
-	u32 aux_control;	/* 0x3c */
-	u32 ttb;		/* 0x40 */
-	u32 domain_access;	/* 0x44 */
-	u32 process_id;		/* 0x48 */
-};
-#endif
-#endif
-
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
deleted file mode 100644
index 7ff6f0d655c8..000000000000
--- a/arch/arm/mach-pxa/pcm027.c
+++ /dev/null
@@ -1,266 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/pcm027.c
- *  Support for the Phytec phyCORE-PXA270 CPU card (aka PCM-027).
- *
- *  Refer
- *   http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-XScale-PXA270.html
- *  for additional hardware info
- *
- *  Author:	Juergen Kilb
- *  Created:	April 05, 2005
- *  Copyright:	Phytec Messtechnik GmbH
- *  e-Mail:	armlinux@phytec.de
- *
- *  based on Intel Mainstone Board
- *
- *  Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/max7301.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "pxa27x.h"
-#include "pcm027.h"
-#include "generic.h"
-
-/*
- * ABSTRACT:
- *
- * The PXA270 processor comes with a bunch of hardware on its silicon.
- * Not all of this hardware can be used at the same time and not all
- * is routed to module's connectors. Also it depends on the baseboard, what
- * kind of hardware can be used in which way.
- * -> So this file supports the main devices on the CPU card only!
- * Refer pcm990-baseboard.c how to extend this features to get a full
- * blown system with many common interfaces.
- *
- * The PCM-027 supports the following interfaces through its connectors and
- * will be used in pcm990-baseboard.c:
- *
- * - LCD support
- * - MMC support
- * - IDE/CF card
- * - FFUART
- * - BTUART
- * - IRUART
- * - AC97
- * - SSP
- * - SSP3
- *
- * Claimed GPIOs:
- * GPIO0 -> IRQ input from RTC
- * GPIO2 -> SYS_ENA*)
- * GPIO3 -> PWR_SCL
- * GPIO4 -> PWR_SDA
- * GPIO5 -> PowerCap0*)
- * GPIO6 -> PowerCap1*)
- * GPIO7 -> PowerCap2*)
- * GPIO8 -> PowerCap3*)
- * GPIO15 -> /CS1
- * GPIO20 -> /CS2
- * GPIO21 -> /CS3
- * GPIO33 -> /CS5 network controller select
- * GPIO52 -> IRQ from network controller
- * GPIO78 -> /CS2
- * GPIO80 -> /CS4
- * GPIO90 -> LED0
- * GPIO91 -> LED1
- * GPIO114 -> IRQ from CAN controller
- * GPIO117 -> SCL
- * GPIO118 -> SDA
- *
- * *) CPU internal use only
- */
-
-static unsigned long pcm027_pin_config[] __initdata = {
-	/* Chip Selects */
-	GPIO20_nSDCS_2,
-	GPIO21_nSDCS_3,
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,	/* Ethernet */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* GPIO */
-	GPIO52_GPIO,	/* IRQ from network controller */
-#ifdef CONFIG_LEDS_GPIO
-	GPIO90_GPIO,	/* PCM027_LED_CPU */
-	GPIO91_GPIO,	/* PCM027_LED_HEART_BEAT */
-#endif
-	GPIO114_GPIO,	/* IRQ from CAN controller */
-};
-
-/*
- * SMC91x network controller specific stuff
- */
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= PCM027_ETH_PHYS + 0x300,
-		.end	= PCM027_ETH_PHYS + PCM027_ETH_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PCM027_ETH_IRQ,
-		.end	= PCM027_ETH_IRQ,
-		/* note: smc91x's driver doesn't use the trigger bits yet */
-		.flags	= IORESOURCE_IRQ | PCM027_ETH_IRQ_EDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-/*
- * SPI host and devices
- */
-static struct pxa2xx_spi_controller pxa_ssp_master_info = {
-	.num_chipselect	= 1,
-};
-
-static struct max7301_platform_data max7301_info = {
-	.base = -1,
-};
-
-/* bus_num must match id in pxa2xx_set_spi_info() call */
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "max7301",
-		.platform_data	= &max7301_info,
-		.max_speed_hz	= 13000000,
-		.bus_num	= 1,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-/*
- * NOR flash
- */
-static struct physmap_flash_data pcm027_flash_data = {
-	.width  = 4,
-};
-
-static struct resource pcm027_flash_resource = {
-	.start          = PCM027_FLASH_PHYS,
-	.end            = PCM027_FLASH_PHYS + PCM027_FLASH_SIZE - 1 ,
-	.flags          = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm027_flash = {
-	.name           = "physmap-flash",
-	.id             = 0,
-	.dev            = {
-		.platform_data  = &pcm027_flash_data,
-	},
-	.resource       = &pcm027_flash_resource,
-	.num_resources  = 1,
-};
-
-#ifdef CONFIG_LEDS_GPIO
-
-static struct gpio_led pcm027_led[] = {
-	{
-		.name = "led0:red",	/* FIXME */
-		.gpio = PCM027_LED_CPU
-	},
-	{
-		.name = "led1:green",	/* FIXME */
-		.gpio = PCM027_LED_HEARD_BEAT
-	},
-};
-
-static struct gpio_led_platform_data pcm027_led_data = {
-	.num_leds	= ARRAY_SIZE(pcm027_led),
-	.leds		= pcm027_led
-};
-
-static struct platform_device pcm027_led_dev = {
-	.name		= "leds-gpio",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &pcm027_led_data,
-	},
-};
-
-#endif /* CONFIG_LEDS_GPIO */
-
-/*
- * declare the available device resources on this board
- */
-static struct platform_device *devices[] __initdata = {
-	&smc91x_device,
-	&pcm027_flash,
-#ifdef CONFIG_LEDS_GPIO
-	&pcm027_led_dev
-#endif
-};
-
-/*
- * pcm027_init - breath some life into the board
- */
-static void __init pcm027_init(void)
-{
-	/* system bus arbiter setting
-	 * - Core_Park
-	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
-	 */
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	/* at last call the baseboard to initialize itself */
-#ifdef CONFIG_MACH_PCM990_BASEBOARD
-	pcm990_baseboard_init();
-#endif
-
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-
-static void __init pcm027_map_io(void)
-{
-	pxa27x_map_io();
-
-	/* initialize sleep mode regs (wake-up sources, etc) */
-	PGSR0 = 0x01308000;
-	PGSR1 = 0x00CF0002;
-	PGSR2 = 0x0E294000;
-	PGSR3 = 0x0000C000;
-	PWER  = 0x40000000 | PWER_GPIO0 | PWER_GPIO1;
-	PRER  = 0x00000000;
-	PFER  = 0x00000003;
-}
-
-MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
-	/* Maintainer: Pengutronix */
-	.atag_offset	= 0x100,
-	.map_io		= pcm027_map_io,
-	.nr_irqs	= PCM027_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= pcm027_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.h b/arch/arm/mach-pxa/pcm027.h
deleted file mode 100644
index 58ade4ad6ba3..000000000000
--- a/arch/arm/mach-pxa/pcm027.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-pxa/include/mach/pcm027.h
- *
- * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
- * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- */
-
-/*
- * Definitions of CPU card resources only
- */
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/* phyCORE-PXA270 (PCM027) Interrupts */
-#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
-#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
-#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
-#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
-#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
-
-#define PCM027_NR_IRQS		(IRQ_BOARD_START + 32)
-
-/* I2C RTC */
-#define PCM027_RTC_IRQ_GPIO	0
-#define PCM027_RTC_IRQ		PXA_GPIO_TO_IRQ(PCM027_RTC_IRQ_GPIO)
-#define PCM027_RTC_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define ADR_PCM027_RTC		0x51	/* I2C address */
-
-/* I2C EEPROM */
-#define ADR_PCM027_EEPROM	0x54	/* I2C address */
-
-/* Ethernet chip (SMSC91C111) */
-#define PCM027_ETH_IRQ_GPIO	52
-#define PCM027_ETH_IRQ		PXA_GPIO_TO_IRQ(PCM027_ETH_IRQ_GPIO)
-#define PCM027_ETH_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM027_ETH_PHYS		PXA_CS5_PHYS
-#define PCM027_ETH_SIZE		(1*1024*1024)
-
-/* CAN controller SJA1000 (unsupported yet) */
-#define PCM027_CAN_IRQ_GPIO	114
-#define PCM027_CAN_IRQ		PXA_GPIO_TO_IRQ(PCM027_CAN_IRQ_GPIO)
-#define PCM027_CAN_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define PCM027_CAN_PHYS		0x22000000
-#define PCM027_CAN_SIZE		0x100
-
-/* SPI GPIO expander (unsupported yet) */
-#define PCM027_EGPIO_IRQ_GPIO	27
-#define PCM027_EGPIO_IRQ	PXA_GPIO_TO_IRQ(PCM027_EGPIO_IRQ_GPIO)
-#define PCM027_EGPIO_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define PCM027_EGPIO_CS		24
-/*
- * TODO: Switch this pin from dedicated usage to GPIO if
- * more than the MAX7301 device is connected to this SPI bus
- */
-#define PCM027_EGPIO_CS_MODE	GPIO24_SFRM_MD
-
-/* Flash memory */
-#define PCM027_FLASH_PHYS	0x00000000
-#define PCM027_FLASH_SIZE	0x02000000
-
-/* onboard LEDs connected to GPIO */
-#define PCM027_LED_CPU		90
-#define PCM027_LED_HEARD_BEAT	91
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
- * TODO: Add your own basebaord init function and call it from
- * inside pcm027_init(). This example here is for the developmen board.
- * Refer pcm990-baseboard.c
- */
-extern void pcm990_baseboard_init(void);
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
deleted file mode 100644
index 33a9d2eeca1c..000000000000
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ /dev/null
@@ -1,408 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  arch/arm/mach-pxa/pcm990-baseboard.c
- *  Support for the Phytec phyCORE-PXA270 Development Platform (PCM-990).
- *
- *  Refer
- *   http://www.phytec.com/products/rdk/ARM-XScale/phyCORE-XScale-PXA270.html
- *  for additional hardware info
- *
- *  Author:	Juergen Kilb
- *  Created:	April 05, 2005
- *  Copyright:	Phytec Messtechnik GmbH
- *  e-Mail:	armlinux@phytec.de
- *
- *  based on Intel Mainstone Board
- *
- *  Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
- */
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/map.h>
-#include "pxa27x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include "pcm990_baseboard.h"
-#include <linux/platform_data/video-pxafb.h>
-
-#include "devices.h"
-#include "generic.h"
-
-static unsigned long pcm990_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	/* USB */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	/* PWM0 */
-	GPIO16_PWM0_OUT,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-};
-
-static void __iomem *pcm990_cpld_base;
-
-static u8 pcm990_cpld_readb(unsigned int reg)
-{
-	return readb(pcm990_cpld_base + reg);
-}
-
-static void pcm990_cpld_writeb(u8 value, unsigned int reg)
-{
-	writeb(value, pcm990_cpld_base + reg);
-}
-
-/*
- * pcm990_lcd_power - control power supply to the LCD
- * @on: 0 = switch off, 1 = switch on
- *
- * Called by the pxafb driver
- */
-#ifndef CONFIG_PCM990_DISPLAY_NONE
-static void pcm990_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	if (on) {
-		/* enable LCD-Latches
-		 * power on LCD
-		 */
-		pcm990_cpld_writeb(PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON,
-				PCM990_CTRL_REG3);
-	} else {
-		/* disable LCD-Latches
-		 * power off LCD
-		 */
-		pcm990_cpld_writeb(0, PCM990_CTRL_REG3);
-	}
-}
-#endif
-
-#if defined(CONFIG_PCM990_DISPLAY_SHARP)
-static struct pxafb_mode_info fb_info_sharp_lq084v1dg21 = {
-	.pixclock		= 28000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 20,
-	.left_margin		= 103,
-	.right_margin		= 47,
-	.vsync_len		= 6,
-	.upper_margin		= 28,
-	.lower_margin		= 5,
-	.sync			= 0,
-	.cmap_greyscale		= 0,
-};
-
-static struct pxafb_mach_info pcm990_fbinfo __initdata = {
-	.modes			= &fb_info_sharp_lq084v1dg21,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= pcm990_lcd_power,
-};
-#elif defined(CONFIG_PCM990_DISPLAY_NEC)
-struct pxafb_mode_info fb_info_nec_nl6448bc20_18d = {
-	.pixclock		= 39720,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 32,
-	.left_margin		= 16,
-	.right_margin		= 48,
-	.vsync_len		= 2,
-	.upper_margin		= 12,
-	.lower_margin		= 17,
-	.sync			= 0,
-	.cmap_greyscale		= 0,
-};
-
-static struct pxafb_mach_info pcm990_fbinfo __initdata = {
-	.modes			= &fb_info_nec_nl6448bc20_18d,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= pcm990_lcd_power,
-};
-#endif
-
-static struct pwm_lookup pcm990_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data pcm990_backlight_data = {
-	.max_brightness	= 1023,
-	.dft_brightness	= 1023,
-};
-
-static struct platform_device pcm990_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm0.dev,
-		.platform_data = &pcm990_backlight_data,
-	},
-};
-
-/*
- * The PCM-990 development baseboard uses PCM-027's hardware in the
- * following way:
- *
- * - LCD support is in use
- *  - GPIO16 is output for back light on/off with PWM
- *  - GPIO58 ... GPIO73 are outputs for display data
- *  - GPIO74 is output output for LCDFCLK
- *  - GPIO75 is output for LCDLCLK
- *  - GPIO76 is output for LCDPCLK
- *  - GPIO77 is output for LCDBIAS
- * - MMC support is in use
- *  - GPIO32 is output for MMCCLK
- *  - GPIO92 is MMDAT0
- *  - GPIO109 is MMDAT1
- *  - GPIO110 is MMCS0
- *  - GPIO111 is MMCS1
- *  - GPIO112 is MMCMD
- * - IDE/CF card is in use
- *  - GPIO48 is output /POE
- *  - GPIO49 is output /PWE
- *  - GPIO50 is output /PIOR
- *  - GPIO51 is output /PIOW
- *  - GPIO54 is output /PCE2
- *  - GPIO55 is output /PREG
- *  - GPIO56 is input /PWAIT
- *  - GPIO57 is output /PIOS16
- *  - GPIO79 is output PSKTSEL
- *  - GPIO85 is output /PCE1
- * - FFUART is in use
- *  - GPIO34 is input FFRXD
- *  - GPIO35 is input FFCTS
- *  - GPIO36 is input FFDCD
- *  - GPIO37 is input FFDSR
- *  - GPIO38 is input FFRI
- *  - GPIO39 is output FFTXD
- *  - GPIO40 is output FFDTR
- *  - GPIO41 is output FFRTS
- * - BTUART is in use
- *  - GPIO42 is input BTRXD
- *  - GPIO43 is output BTTXD
- *  - GPIO44 is input BTCTS
- *  - GPIO45 is output BTRTS
- * - IRUART is in use
- *  - GPIO46 is input STDRXD
- *  - GPIO47 is output STDTXD
- * - AC97 is in use*)
- *  - GPIO28 is input AC97CLK
- *  - GPIO29 is input AC97DatIn
- *  - GPIO30 is output AC97DatO
- *  - GPIO31 is output AC97SYNC
- *  - GPIO113 is output AC97_RESET
- * - SSP is in use
- *  - GPIO23 is output SSPSCLK
- *  - GPIO24 is output chip select to Max7301
- *  - GPIO25 is output SSPTXD
- *  - GPIO26 is input SSPRXD
- *  - GPIO27 is input for Max7301 IRQ
- *  - GPIO53 is input SSPSYSCLK
- * - SSP3 is in use
- *  - GPIO81 is output SSPTXD3
- *  - GPIO82 is input SSPRXD3
- *  - GPIO83 is output SSPSFRM
- *  - GPIO84 is output SSPCLK3
- *
- * Otherwise claimed GPIOs:
- * GPIO1 -> IRQ from user switch
- * GPIO9 -> IRQ from power management
- * GPIO10 -> IRQ from WML9712 AC97 controller
- * GPIO11 -> IRQ from IDE controller
- * GPIO12 -> IRQ from CF controller
- * GPIO13 -> IRQ from CF controller
- * GPIO14 -> GPIO free
- * GPIO15 -> /CS1 selects baseboard's Control CPLD (U7, 16 bit wide data path)
- * GPIO19 -> GPIO free
- * GPIO20 -> /SDCS2
- * GPIO21 -> /CS3 PC card socket select
- * GPIO33 -> /CS5  network controller select
- * GPIO78 -> /CS2  (16 bit wide data path)
- * GPIO80 -> /CS4  (16 bit wide data path)
- * GPIO86 -> GPIO free
- * GPIO87 -> GPIO free
- * GPIO90 -> LED0 on CPU module
- * GPIO91 -> LED1 on CPI module
- * GPIO117 -> SCL
- * GPIO118 -> SDA
- */
-
-static unsigned long pcm990_irq_enabled;
-
-static void pcm990_mask_ack_irq(struct irq_data *d)
-{
-	int pcm990_irq = (d->irq - PCM027_IRQ(0));
-
-	pcm990_irq_enabled &= ~(1 << pcm990_irq);
-
-	pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA);
-}
-
-static void pcm990_unmask_irq(struct irq_data *d)
-{
-	int pcm990_irq = (d->irq - PCM027_IRQ(0));
-	u8 val;
-
-	/* the irq can be acknowledged only if deasserted, so it's done here */
-
-	pcm990_irq_enabled |= (1 << pcm990_irq);
-
-	val = pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
-	val |= 1 << pcm990_irq;
-	pcm990_cpld_writeb(val, PCM990_CTRL_INTSETCLR);
-
-	pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA);
-}
-
-static struct irq_chip pcm990_irq_chip = {
-	.irq_mask_ack	= pcm990_mask_ack_irq,
-	.irq_unmask	= pcm990_unmask_irq,
-};
-
-static void pcm990_irq_handler(struct irq_desc *desc)
-{
-	unsigned int irq;
-	unsigned long pending;
-
-	pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
-	pending &= pcm990_irq_enabled;
-
-	do {
-		/* clear our parent IRQ */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = PCM027_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-		}
-		pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
-		pending &= pcm990_irq_enabled;
-	} while (pending);
-}
-
-static void __init pcm990_init_irq(void)
-{
-	int irq;
-
-	/* setup extra PCM990 irqs */
-	for (irq = PCM027_IRQ(0); irq <= PCM027_IRQ(3); irq++) {
-		irq_set_chip_and_handler(irq, &pcm990_irq_chip,
-					 handle_level_irq);
-		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
-
-	/* disable all Interrupts */
-	pcm990_cpld_writeb(0x0, PCM990_CTRL_INTMSKENA);
-	pcm990_cpld_writeb(0xff, PCM990_CTRL_INTSETCLR);
-
-	irq_set_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler);
-	irq_set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE);
-}
-
-static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
-			void *data)
-{
-	int err;
-
-	err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, 0,
-			     "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "pcm990_mci_init: MMC/SD: can't request MMC "
-				"card detect IRQ\n");
-
-	return err;
-}
-
-static int pcm990_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	u8 val;
-
-	val = pcm990_cpld_readb(PCM990_CTRL_REG5);
-
-	if ((1 << vdd) & p_d->ocr_mask)
-		val |= PCM990_CTRL_MMC2PWR;
-	else
-		val &= ~PCM990_CTRL_MMC2PWR;
-
-	pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5);
-	return 0;
-}
-
-static void pcm990_mci_exit(struct device *dev, void *data)
-{
-	free_irq(PCM027_MMCDET_IRQ, data);
-}
-
-#define MSECS_PER_JIFFY (1000/HZ)
-
-static struct pxamci_platform_data pcm990_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init 			= pcm990_mci_init,
-	.setpower 		= pcm990_mci_setpower,
-	.exit			= pcm990_mci_exit,
-};
-
-static struct pxaohci_platform_data pcm990_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-	.power_on_delay	= 10,
-};
-
-/*
- * system init for baseboard usage. Will be called by pcm027 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init pcm990_baseboard_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
-
-	pcm990_cpld_base = ioremap(PCM990_CTRL_PHYS, PCM990_CTRL_SIZE);
-	if (!pcm990_cpld_base) {
-		pr_err("pcm990: failed to ioremap cpld\n");
-		return;
-	}
-
-	/* register CPLD's IRQ controller */
-	pcm990_init_irq();
-
-#ifndef CONFIG_PCM990_DISPLAY_NONE
-	pxa_set_fb_info(NULL, &pcm990_fbinfo);
-#endif
-	pwm_add_table(pcm990_pwm_lookup, ARRAY_SIZE(pcm990_pwm_lookup));
-	platform_device_register(&pcm990_backlight_device);
-
-	/* MMC */
-	pxa_set_mci_info(&pcm990_mci_platform_data);
-
-	/* USB host */
-	pxa_set_ohci_info(&pcm990_ohci_platform_data);
-
-	pxa_set_i2c_info(NULL);
-	pxa_set_ac97_info(NULL);
-
-	printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
-}
diff --git a/arch/arm/mach-pxa/pcm990_baseboard.h b/arch/arm/mach-pxa/pcm990_baseboard.h
deleted file mode 100644
index 18cf71decb03..000000000000
--- a/arch/arm/mach-pxa/pcm990_baseboard.h
+++ /dev/null
@@ -1,199 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
- *
- * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
- * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- */
-
-#include "pcm027.h"
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/*
- * definitions relevant only when the PCM-990
- * development base board is in use
- */
-
-/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
-#define PCM990_CTRL_INT_IRQ_GPIO	9
-#define PCM990_CTRL_INT_IRQ		PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO)
-#define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
-#define PCM990_CTRL_SIZE		(1*1024*1024)
-
-#define PCM990_CTRL_PWR_IRQ_GPIO	14
-#define PCM990_CTRL_PWR_IRQ		PXA_GPIO_TO_IRQ(PCM990_CTRL_PWR_IRQ_GPIO)
-#define PCM990_CTRL_PWR_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-
-/* visible CPLD (U7) registers */
-#define PCM990_CTRL_REG0	0x0000	/* RESET REGISTER */
-#define PCM990_CTRL_SYSRES	0x0001	/* System RESET REGISTER */
-#define PCM990_CTRL_RESOUT	0x0002	/* RESETOUT Enable REGISTER */
-#define PCM990_CTRL_RESGPIO	0x0004	/* RESETGPIO Enable REGISTER */
-
-#define PCM990_CTRL_REG1	0x0002	/* Power REGISTER */
-#define PCM990_CTRL_5VOFF	0x0001	/* Disable  5V Regulators */
-#define PCM990_CTRL_CANPWR	0x0004	/* Enable CANPWR ADUM */
-#define PCM990_CTRL_PM_5V	0x0008	/* Read 5V OK */
-
-#define PCM990_CTRL_REG2	0x0004	/* LED REGISTER */
-#define PCM990_CTRL_LEDPWR	0x0001	/* POWER LED enable */
-#define PCM990_CTRL_LEDBAS	0x0002	/* BASIS LED enable */
-#define PCM990_CTRL_LEDUSR	0x0004	/* USER LED enable */
-
-#define PCM990_CTRL_REG3	0x0006	/* LCD CTRL REGISTER 3 */
-#define PCM990_CTRL_LCDPWR	0x0001	/* RW LCD Power on */
-#define PCM990_CTRL_LCDON	0x0002	/* RW LCD Latch on */
-#define PCM990_CTRL_LCDPOS1	0x0004	/* RW POS 1 */
-#define PCM990_CTRL_LCDPOS2	0x0008	/* RW POS 2 */
-
-#define PCM990_CTRL_REG4	0x0008	/* MMC1 CTRL REGISTER 4 */
-#define PCM990_CTRL_MMC1PWR	0x0001 /* RW MMC1 Power on */
-
-#define PCM990_CTRL_REG5	0x000A	/* MMC2 CTRL REGISTER 5 */
-#define PCM990_CTRL_MMC2PWR	0x0001	/* RW MMC2 Power on */
-#define PCM990_CTRL_MMC2LED	0x0002	/* RW MMC2 LED */
-#define PCM990_CTRL_MMC2DE	0x0004	/* R MMC2 Card detect */
-#define PCM990_CTRL_MMC2WP	0x0008	/* R MMC2 Card write protect */
-
-#define PCM990_CTRL_INTSETCLR	0x000C	/* Interrupt Clear REGISTER */
-#define PCM990_CTRL_INTC0	0x0001	/* Clear Reg BT Detect */
-#define PCM990_CTRL_INTC1	0x0002	/* Clear Reg FR RI */
-#define PCM990_CTRL_INTC2	0x0004	/* Clear Reg MMC1 Detect */
-#define PCM990_CTRL_INTC3	0x0008	/* Clear Reg PM_5V off */
-
-#define PCM990_CTRL_INTMSKENA	0x000E	/* Interrupt Enable REGISTER */
-#define PCM990_CTRL_ENAINT0	0x0001	/* Enable Int BT Detect */
-#define PCM990_CTRL_ENAINT1	0x0002	/* Enable Int FR RI */
-#define PCM990_CTRL_ENAINT2	0x0004	/* Enable Int MMC1 Detect */
-#define PCM990_CTRL_ENAINT3	0x0008	/* Enable Int PM_5V off */
-
-#define PCM990_CTRL_REG8	0x0014	/* Uart REGISTER */
-#define PCM990_CTRL_FFSD	0x0001	/* BT Uart Enable */
-#define PCM990_CTRL_BTSD	0x0002	/* FF Uart Enable */
-#define PCM990_CTRL_FFRI	0x0004	/* FF Uart RI detect */
-#define PCM990_CTRL_BTRX	0x0008	/* BT Uart Rx detect */
-
-#define PCM990_CTRL_REG9	0x0010	/* AC97 Flash REGISTER */
-#define PCM990_CTRL_FLWP	0x0001	/* pC Flash Write Protect */
-#define PCM990_CTRL_FLDIS	0x0002	/* pC Flash Disable */
-#define PCM990_CTRL_AC97ENA	0x0004	/* Enable AC97 Expansion */
-
-#define PCM990_CTRL_REG10	0x0012	/* GPS-REGISTER */
-#define PCM990_CTRL_GPSPWR	0x0004	/* GPS-Modul Power on */
-#define PCM990_CTRL_GPSENA	0x0008	/* GPS-Modul Enable */
-
-#define PCM990_CTRL_REG11	0x0014	/* Accu REGISTER */
-#define PCM990_CTRL_ACENA	0x0001	/* Charge Enable */
-#define PCM990_CTRL_ACSEL	0x0002	/* Charge Akku -> DC Enable */
-#define PCM990_CTRL_ACPRES	0x0004	/* DC Present */
-#define PCM990_CTRL_ACALARM	0x0008	/* Error Akku */
-
-/*
- * IDE
- */
-#define PCM990_IDE_IRQ_GPIO	13
-#define PCM990_IDE_IRQ		PXA_GPIO_TO_IRQ(PCM990_IDE_IRQ_GPIO)
-#define PCM990_IDE_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM990_IDE_PLD_PHYS	0x20000000	/* 16 bit wide */
-#define PCM990_IDE_PLD_BASE	0xee000000
-#define PCM990_IDE_PLD_SIZE	(1*1024*1024)
-
-/* visible CPLD (U6) registers */
-#define PCM990_IDE_PLD_REG0	0x1000	/* OFFSET IDE REGISTER 0 */
-#define PCM990_IDE_PM5V		0x0004	/* R System VCC_5V */
-#define PCM990_IDE_STBY		0x0008	/* R System StandBy */
-
-#define PCM990_IDE_PLD_REG1	0x1002	/* OFFSET IDE REGISTER 1 */
-#define PCM990_IDE_IDEMODE	0x0001	/* R TrueIDE Mode */
-#define PCM990_IDE_DMAENA	0x0004	/* RW DMA Enable */
-#define PCM990_IDE_DMA1_0	0x0008	/* RW 1=DREQ1 0=DREQ0 */
-
-#define PCM990_IDE_PLD_REG2	0x1004	/* OFFSET IDE REGISTER 2 */
-#define PCM990_IDE_RESENA	0x0001	/* RW IDE Reset Bit enable */
-#define PCM990_IDE_RES		0x0002	/* RW IDE Reset Bit */
-#define PCM990_IDE_RDY		0x0008	/* RDY */
-
-#define PCM990_IDE_PLD_REG3	0x1006	/* OFFSET IDE REGISTER 3 */
-#define PCM990_IDE_IDEOE	0x0001	/* RW Latch on Databus */
-#define PCM990_IDE_IDEON	0x0002	/* RW Latch on Control Address */
-#define PCM990_IDE_IDEIN	0x0004	/* RW Latch on Interrupt usw. */
-
-#define PCM990_IDE_PLD_REG4	0x1008	/* OFFSET IDE REGISTER 4 */
-#define PCM990_IDE_PWRENA	0x0001	/* RW IDE Power enable */
-#define PCM990_IDE_5V		0x0002	/* R IDE Power 5V */
-#define PCM990_IDE_PWG		0x0008	/* R IDE Power is on */
-
-#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
-#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
-
-/*
- * Compact Flash
- */
-#define PCM990_CF_IRQ_GPIO	11
-#define PCM990_CF_IRQ		PXA_GPIO_TO_IRQ(PCM990_CF_IRQ_GPIO)
-#define PCM990_CF_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-
-#define PCM990_CF_CD_GPIO	12
-#define PCM990_CF_CD		PXA_GPIO_TO_IRQ(PCM990_CF_CD_GPIO)
-#define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING
-
-#define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
-
-/* visible CPLD (U6) registers */
-#define PCM990_CF_PLD_REG0	0x1000	/* OFFSET CF REGISTER 0 */
-#define PCM990_CF_REG0_LED	0x0001	/* RW LED on */
-#define PCM990_CF_REG0_BLK	0x0002	/* RW LED flash when access */
-#define PCM990_CF_REG0_PM5V	0x0004	/* R System VCC_5V enable */
-#define PCM990_CF_REG0_STBY	0x0008	/* R System StandBy */
-
-#define PCM990_CF_PLD_REG1	0x1002	/* OFFSET CF REGISTER 1 */
-#define PCM990_CF_REG1_IDEMODE	0x0001	/* RW CF card run as TrueIDE */
-#define PCM990_CF_REG1_CF0	0x0002	/* RW CF card at ADDR 0x28000000 */
-
-#define PCM990_CF_PLD_REG2	0x1004	/* OFFSET CF REGISTER 2 */
-#define PCM990_CF_REG2_RES	0x0002	/* RW CF RESET BIT */
-#define PCM990_CF_REG2_RDYENA	0x0004	/* RW Enable CF_RDY */
-#define PCM990_CF_REG2_RDY	0x0008	/* R CF_RDY auf PWAIT */
-
-#define PCM990_CF_PLD_REG3	0x1006	/* OFFSET CF REGISTER 3 */
-#define PCM990_CF_REG3_CFOE	0x0001	/* RW Latch on Databus */
-#define PCM990_CF_REG3_CFON	0x0002	/* RW Latch on Control Address */
-#define PCM990_CF_REG3_CFIN	0x0004	/* RW Latch on Interrupt usw. */
-#define PCM990_CF_REG3_CFCD	0x0008	/* RW Latch on CD1/2 VS1/2 usw */
-
-#define PCM990_CF_PLD_REG4	0x1008	/* OFFSET CF REGISTER 4 */
-#define PCM990_CF_REG4_PWRENA	0x0001	/* RW CF Power on (CD1/2 = "00") */
-#define PCM990_CF_REG4_5_3V	0x0002	/* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */
-#define PCM990_CF_REG4_3B	0x0004	/* RW 3.0V Backup from VCC (5_3V=0) */
-#define PCM990_CF_REG4_PWG	0x0008	/* R CF-Power is on */
-
-#define PCM990_CF_PLD_REG5	0x100A	/* OFFSET CF REGISTER 5 */
-#define PCM990_CF_REG5_BVD1	0x0001	/* R CF /BVD1 */
-#define PCM990_CF_REG5_BVD2	0x0002	/* R CF /BVD2 */
-#define PCM990_CF_REG5_VS1	0x0004	/* R CF /VS1 */
-#define PCM990_CF_REG5_VS2	0x0008	/* R CF /VS2 */
-
-#define PCM990_CF_PLD_REG6	0x100C	/* OFFSET CF REGISTER 6 */
-#define PCM990_CF_REG6_CD1	0x0001	/* R CF Card_Detect1 */
-#define PCM990_CF_REG6_CD2	0x0002	/* R CF Card_Detect2 */
-
-/*
- * Wolfson AC97 Touch
- */
-#define PCM990_AC97_IRQ_GPIO	10
-#define PCM990_AC97_IRQ		PXA_GPIO_TO_IRQ(PCM990_AC97_IRQ_GPIO)
-#define PCM990_AC97_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-
-/*
- * MMC phyCORE
- */
-#define PCM990_MMC0_IRQ_GPIO	9
-#define PCM990_MMC0_IRQ		PXA_GPIO_TO_IRQ(PCM990_MMC0_IRQ_GPIO)
-#define PCM990_MMC0_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-
-/*
- * USB phyCore
- */
-#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN)
-#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT)
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index f2237f471750..c63e854921ea 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -51,8 +51,6 @@ int pxa_pm_enter(suspend_state_t state)
 		/* if invalid, display message and wait for a hardware reset */
 		if (checksum != sleep_save_checksum) {
 
-			lubbock_set_hexled(0xbadbadc5);
-
 			while (1)
 				pxa_cpu_pm_fns->enter(state);
 		}
diff --git a/arch/arm/mach-pxa/pm.h b/arch/arm/mach-pxa/pm.h
index 00ea3529e30e..a16fa140883c 100644
--- a/arch/arm/mach-pxa/pm.h
+++ b/arch/arm/mach-pxa/pm.h
@@ -27,13 +27,3 @@ extern void pxa_pm_finish(void);
 
 extern const char pm_enter_standby_start[], pm_enter_standby_end[];
 extern int pxa3xx_finish_suspend(unsigned long);
-
-/* NOTE: this is for PM debugging on Lubbock,  it's really a big
- * ugly, but let's keep the crap minimum here, instead of direct
- * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c
- */
-#ifdef CONFIG_ARCH_LUBBOCK
-extern void lubbock_set_hexled(uint32_t value);
-#else
-#define lubbock_set_hexled(x)
-#endif
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
deleted file mode 100644
index 7772a39430ed..000000000000
--- a/arch/arm/mach-pxa/poodle.c
+++ /dev/null
@@ -1,484 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/poodle.c
- *
- *  Support for the SHARP Poodle Board.
- *
- * Based on:
- *  linux/arch/arm/mach-pxa/lubbock.c Author:	Nicolas Pitre
- *
- * Change Log
- *  12-Dec-2002 Sharp Corporation for Poodle
- *  John Lenz <lenz@cs.wisc.edu> updates to 2.6
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/pm.h>
-#include <linux/delay.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/regulator/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mtd/sharpsl.h>
-#include <linux/memblock.h>
-
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "pxa25x.h"
-#include "udc.h"
-#include "poodle.h"
-
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/asoc-poodle.h>
-
-#include <asm/hardware/scoop.h>
-#include <asm/hardware/locomo.h>
-#include <asm/mach/sharpsl_param.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long poodle_pin_config[] __initdata = {
-	/* I/O */
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-	GPIO18_RDY,
-
-	/* Clock */
-	GPIO12_32KHz,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO24_GPIO,	/* POODLE_GPIO_TP_CS - SFRM as chip select */
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO32_I2S_SYSCLK,
-
-	/* Infra-Red */
-	GPIO47_FICP_TXD,
-	GPIO46_FICP_RXD,
-
-	/* FFUART */
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-	GPIO39_FFUART_TXD,
-	GPIO37_FFUART_DSR,
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* GPIO */
-	GPIO9_GPIO,	/* POODLE_GPIO_nSD_DETECT */
-	GPIO7_GPIO,	/* POODLE_GPIO_nSD_WP */
-	GPIO3_GPIO,	/* POODLE_GPIO_SD_PWR */
-	GPIO33_GPIO,	/* POODLE_GPIO_SD_PWR1 */
-
-	GPIO20_GPIO,	/* POODLE_GPIO_USB_PULLUP */
-	GPIO22_GPIO,	/* POODLE_GPIO_IR_ON */
-};
-
-static struct resource poodle_scoop_resources[] = {
-	[0] = {
-		.start		= 0x10800000,
-		.end		= 0x10800fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config poodle_scoop_setup = {
-	.io_dir		= POODLE_SCOOP_IO_DIR,
-	.io_out		= POODLE_SCOOP_IO_OUT,
-	.gpio_base	= POODLE_SCOOP_GPIO_BASE,
-};
-
-struct platform_device poodle_scoop_device = {
-	.name		= "sharp-scoop",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &poodle_scoop_setup,
-	},
-	.num_resources	= ARRAY_SIZE(poodle_scoop_resources),
-	.resource	= poodle_scoop_resources,
-};
-
-static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
-{
-	.dev        = &poodle_scoop_device.dev,
-	.irq        = POODLE_IRQ_GPIO_CF_IRQ,
-	.cd_irq     = POODLE_IRQ_GPIO_CF_CD,
-	.cd_irq_str = "PCMCIA0 CD",
-},
-};
-
-static struct scoop_pcmcia_config poodle_pcmcia_config = {
-	.devs         = &poodle_pcmcia_scoop[0],
-	.num_devs     = 1,
-};
-
-EXPORT_SYMBOL(poodle_scoop_device);
-
-/* LoCoMo device */
-static struct resource locomo_resources[] = {
-	[0] = {
-		.start		= 0x10000000,
-		.end		= 0x10001fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= PXA_GPIO_TO_IRQ(10),
-		.end		= PXA_GPIO_TO_IRQ(10),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct locomo_platform_data locomo_info = {
-	.irq_base	= IRQ_BOARD_START,
-};
-
-static struct platform_device poodle_locomo_device = {
-	.name		= "locomo",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(locomo_resources),
-	.resource	= locomo_resources,
-	.dev		= {
-		.platform_data	= &locomo_info,
-	},
-};
-
-static struct poodle_audio_platform_data poodle_audio_pdata = {
-	.locomo_dev	= &poodle_locomo_device.dev,
-
-	.gpio_amp_on   	= POODLE_LOCOMO_GPIO_AMP_ON,
-	.gpio_mute_l   	= POODLE_LOCOMO_GPIO_MUTE_L,
-	.gpio_mute_r   	= POODLE_LOCOMO_GPIO_MUTE_R,
-	.gpio_232vcc_on	= POODLE_LOCOMO_GPIO_232VCC_ON,
-	.gpio_jk_b     	= POODLE_LOCOMO_GPIO_JK_B,
-};
-
-static struct platform_device poodle_audio_device = {
-	.name	= "poodle-audio",
-	.id	= -1,
-	.dev.platform_data = &poodle_audio_pdata,
-};
-
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_controller poodle_spi_info = {
-	.num_chipselect	= 1,
-};
-
-static struct gpiod_lookup_table poodle_spi_gpio_table = {
-	.dev_id = "pxa2xx-spi.1",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", POODLE_GPIO_TP_CS, "cs", 0, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct ads7846_platform_data poodle_ads7846_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.gpio_pendown		= POODLE_GPIO_TP_INT,
-};
-
-static struct spi_board_info poodle_spi_devices[] = {
-	{
-		.modalias	= "ads7846",
-		.max_speed_hz	= 10000,
-		.bus_num	= 1,
-		.platform_data	= &poodle_ads7846_info,
-		.irq		= PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT),
-	},
-};
-
-static void __init poodle_init_spi(void)
-{
-	gpiod_add_lookup_table(&poodle_spi_gpio_table);
-	pxa2xx_set_spi_info(1, &poodle_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
-}
-#else
-static inline void poodle_init_spi(void) {}
-#endif
-
-/*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data)
-{
-	int err;
-
-	err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
-	if (err)
-		goto err_free_2;
-
-	err = gpio_request(POODLE_GPIO_SD_PWR1, "SD_PWR1");
-	if (err)
-		goto err_free_3;
-
-	gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
-	gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
-
-	return 0;
-
-err_free_3:
-	gpio_free(POODLE_GPIO_SD_PWR);
-err_free_2:
-	return err;
-}
-
-static int poodle_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask) {
-		gpio_set_value(POODLE_GPIO_SD_PWR, 1);
-		mdelay(2);
-		gpio_set_value(POODLE_GPIO_SD_PWR1, 1);
-	} else {
-		gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
-		gpio_set_value(POODLE_GPIO_SD_PWR, 0);
-	}
-
-	return 0;
-}
-
-static void poodle_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(POODLE_GPIO_SD_PWR1);
-	gpio_free(POODLE_GPIO_SD_PWR);
-}
-
-static struct pxamci_platform_data poodle_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 			= poodle_mci_init,
-	.setpower 		= poodle_mci_setpower,
-	.exit			= poodle_mci_exit,
-};
-
-static struct gpiod_lookup_table poodle_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", POODLE_GPIO_nSD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", POODLE_GPIO_nSD_WP,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/*
- * Irda
- */
-static struct pxaficp_platform_data poodle_ficp_platform_data = {
-	.gpio_pwdown		= POODLE_GPIO_IR_ON,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-
-/*
- * USB Device Controller
- */
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	/* no connect GPIO; poodle can't tell connection status */
-	.gpio_pullup	= POODLE_GPIO_USB_PULLUP,
-};
-
-
-/* PXAFB device */
-static struct pxafb_mode_info poodle_fb_mode = {
-	.pixclock	= 144700,
-	.xres		= 320,
-	.yres		= 240,
-	.bpp		= 16,
-	.hsync_len	= 7,
-	.left_margin	= 11,
-	.right_margin	= 30,
-	.vsync_len	= 2,
-	.upper_margin	= 2,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info poodle_fb_info = {
-	.modes		= &poodle_fb_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr sharpsl_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static const char * const probes[] = {
-	"cmdlinepart",
-	"ofpart",
-	"sharpslpart",
-	NULL,
-};
-
-static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
-	.badblock_pattern	= &sharpsl_bbt,
-	.part_parsers		= probes,
-};
-
-static struct resource sharpsl_nand_resources[] = {
-	{
-		.start	= 0x0C000000,
-		.end	= 0x0C000FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_nand_device = {
-	.name		= "sharpsl-nand",
-	.id		= -1,
-	.resource	= sharpsl_nand_resources,
-	.num_resources	= ARRAY_SIZE(sharpsl_nand_resources),
-	.dev.platform_data	= &sharpsl_nand_platform_data,
-};
-
-static struct mtd_partition sharpsl_rom_parts[] = {
-	{
-		.name	="Boot PROM Filesystem",
-		.offset	= 0x00120000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data sharpsl_rom_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
-	.parts		= sharpsl_rom_parts,
-};
-
-static struct resource sharpsl_rom_resources[] = {
-	{
-		.start	= 0x00000000,
-		.end	= 0x007fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.resource = sharpsl_rom_resources,
-	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
-	.dev.platform_data = &sharpsl_rom_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&poodle_locomo_device,
-	&poodle_scoop_device,
-	&poodle_audio_device,
-	&sharpsl_nand_device,
-	&sharpsl_rom_device,
-};
-
-static struct i2c_board_info __initdata poodle_i2c_devices[] = {
-	{ I2C_BOARD_INFO("wm8731", 0x1b) },
-};
-
-static void poodle_poweroff(void)
-{
-	pxa_restart(REBOOT_HARD, NULL);
-}
-
-static void __init poodle_init(void)
-{
-	int ret = 0;
-
-	pm_power_off = poodle_poweroff;
-
-	PCFR |= PCFR_OPDE;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_scoop_config = &poodle_pcmcia_config;
-
-	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	if (ret)
-		pr_warn("poodle: Unable to register LoCoMo device\n");
-
-	pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
-	pxa_set_udc_info(&udc_info);
-	gpiod_add_lookup_table(&poodle_mci_gpio_table);
-	pxa_set_mci_info(&poodle_mci_platform_data);
-	pxa_set_ficp_info(&poodle_ficp_platform_data);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
-	poodle_init_spi();
-	regulator_has_full_constraints();
-}
-
-static void __init fixup_poodle(struct tag *tags, char **cmdline)
-{
-	sharpsl_save_param();
-	memblock_add(0xa0000000, SZ_32M);
-}
-
-MACHINE_START(POODLE, "SHARP Poodle")
-	.fixup		= fixup_poodle,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= POODLE_NR_IRQS,	/* 4 for LoCoMo */
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= poodle_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/poodle.h b/arch/arm/mach-pxa/poodle.h
deleted file mode 100644
index 00798b44f204..000000000000
--- a/arch/arm/mach-pxa/poodle.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/poodle.h
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Based on:
- *   arch/arm/mach-sa1100/include/mach/collie.h
- *
- * ChangeLog:
- *   04-06-2001 Lineo Japan, Inc.
- *   04-16-2001 SHARP Corporation
- *   Update to 2.6 John Lenz
- */
-#ifndef __ASM_ARCH_POODLE_H
-#define __ASM_ARCH_POODLE_H  1
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/*
- * GPIOs
- */
-/* PXA GPIOs */
-#define POODLE_GPIO_ON_KEY		(0)
-#define POODLE_GPIO_AC_IN		(1)
-#define POODLE_GPIO_CO			16
-#define POODLE_GPIO_TP_INT		(5)
-#define POODLE_GPIO_TP_CS		(24)
-#define POODLE_GPIO_WAKEUP		(11)	/* change battery */
-#define POODLE_GPIO_GA_INT		(10)
-#define POODLE_GPIO_IR_ON		(22)
-#define POODLE_GPIO_HP_IN		(4)
-#define POODLE_GPIO_CF_IRQ		(17)
-#define POODLE_GPIO_CF_CD		(14)
-#define POODLE_GPIO_CF_STSCHG		(14)
-#define POODLE_GPIO_SD_PWR		(33)
-#define POODLE_GPIO_SD_PWR1		(3)
-#define POODLE_GPIO_nSD_CLK		(6)
-#define POODLE_GPIO_nSD_WP		(7)
-#define POODLE_GPIO_nSD_INT		(8)
-#define POODLE_GPIO_nSD_DETECT		(9)
-#define POODLE_GPIO_MAIN_BAT_LOW	(13)
-#define POODLE_GPIO_BAT_COVER		(13)
-#define POODLE_GPIO_USB_PULLUP		(20)
-#define POODLE_GPIO_ADC_TEMP_ON		(21)
-#define POODLE_GPIO_BYPASS_ON		(36)
-#define POODLE_GPIO_CHRG_ON		(38)
-#define POODLE_GPIO_CHRG_FULL		(16)
-#define POODLE_GPIO_DISCHARGE_ON        (42) /* Enable battery discharge */
-
-/* PXA GPIOs */
-#define POODLE_IRQ_GPIO_ON_KEY		PXA_GPIO_TO_IRQ(0)
-#define POODLE_IRQ_GPIO_AC_IN		PXA_GPIO_TO_IRQ(1)
-#define POODLE_IRQ_GPIO_HP_IN		PXA_GPIO_TO_IRQ(4)
-#define POODLE_IRQ_GPIO_CO		PXA_GPIO_TO_IRQ(16)
-#define POODLE_IRQ_GPIO_TP_INT		PXA_GPIO_TO_IRQ(5)
-#define POODLE_IRQ_GPIO_WAKEUP		PXA_GPIO_TO_IRQ(11)
-#define POODLE_IRQ_GPIO_GA_INT		PXA_GPIO_TO_IRQ(10)
-#define POODLE_IRQ_GPIO_CF_IRQ		PXA_GPIO_TO_IRQ(17)
-#define POODLE_IRQ_GPIO_CF_CD		PXA_GPIO_TO_IRQ(14)
-#define POODLE_IRQ_GPIO_nSD_INT		PXA_GPIO_TO_IRQ(8)
-#define POODLE_IRQ_GPIO_nSD_DETECT	PXA_GPIO_TO_IRQ(9)
-#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	PXA_GPIO_TO_IRQ(13)
-
-/* SCOOP GPIOs */
-#define POODLE_SCOOP_CHARGE_ON	SCOOP_GPCR_PA11
-#define POODLE_SCOOP_CP401	SCOOP_GPCR_PA13
-#define POODLE_SCOOP_VPEN	SCOOP_GPCR_PA18
-#define POODLE_SCOOP_L_PCLK	SCOOP_GPCR_PA20
-#define POODLE_SCOOP_L_LCLK	SCOOP_GPCR_PA21
-#define POODLE_SCOOP_HS_OUT	SCOOP_GPCR_PA22
-
-#define POODLE_SCOOP_IO_DIR	( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
-#define POODLE_SCOOP_IO_OUT	( 0 )
-
-#define POODLE_SCOOP_GPIO_BASE	(PXA_NR_BUILTIN_GPIO)
-#define POODLE_GPIO_CHARGE_ON	(POODLE_SCOOP_GPIO_BASE + 0)
-#define POODLE_GPIO_CP401	(POODLE_SCOOP_GPIO_BASE + 2)
-#define POODLE_GPIO_VPEN	(POODLE_SCOOP_GPIO_BASE + 7)
-#define POODLE_GPIO_L_PCLK	(POODLE_SCOOP_GPIO_BASE + 9)
-#define POODLE_GPIO_L_LCLK	(POODLE_SCOOP_GPIO_BASE + 10)
-#define POODLE_GPIO_HS_OUT	(POODLE_SCOOP_GPIO_BASE + 11)
-
-#define POODLE_LOCOMO_GPIO_AMP_ON      LOCOMO_GPIO(8)
-#define POODLE_LOCOMO_GPIO_MUTE_L      LOCOMO_GPIO(10)
-#define POODLE_LOCOMO_GPIO_MUTE_R      LOCOMO_GPIO(11)
-#define POODLE_LOCOMO_GPIO_232VCC_ON   LOCOMO_GPIO(12)
-#define POODLE_LOCOMO_GPIO_JK_B        LOCOMO_GPIO(13)
-
-#define POODLE_NR_IRQS		(IRQ_BOARD_START + 4)	/* 4 for LoCoMo */
-
-#endif /* __ASM_ARCH_POODLE_H  */
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
index 5e5d543fdf46..a292de91dce5 100644
--- a/arch/arm/mach-pxa/pxa-dt.c
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -5,13 +5,7 @@
  *  Copyright (C) 2012 Daniel Mack
  */
 
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include "irqs.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 6b34d7c169ea..03e34841fc00 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -27,6 +27,7 @@
 #include <linux/irqchip.h>
 #include <linux/platform_data/mmp_dma.h>
 #include <linux/soc/pxa/cpu.h>
+#include <linux/soc/pxa/smemc.h>
 
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
@@ -143,15 +144,9 @@ set_pwer:
 void __init pxa25x_init_irq(void)
 {
 	pxa_init_irq(32, pxa25x_set_wake);
+	set_handle_irq(pxa25x_handle_irq);
 }
 
-#ifdef CONFIG_CPU_PXA26x
-void __init pxa26x_init_irq(void)
-{
-	pxa_init_irq(32, pxa25x_set_wake);
-}
-#endif
-
 static int __init __init
 pxa25x_dt_init_irq(struct device_node *node, struct device_node *parent)
 {
@@ -183,12 +178,8 @@ void __init pxa25x_map_io(void)
 	pxa25x_get_clk_frequency_khz(1);
 }
 
-static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = {
-	.irq_base	= PXA_GPIO_TO_IRQ(0),
-	.gpio_set_wake	= gpio_set_wake,
-};
-
 static struct platform_device *pxa25x_devices[] __initdata = {
+	&pxa25x_device_gpio,
 	&pxa25x_device_udc,
 	&pxa_device_pmu,
 	&pxa_device_i2s,
@@ -248,8 +239,8 @@ static int __init pxa25x_init(void)
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 
 		if (!of_have_populated_dt()) {
+			software_node_register(&pxa2xx_gpiochip_node);
 			pxa2xx_set_dmac_info(&pxa25x_dma_pdata);
-			pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
 			ret = platform_add_devices(pxa25x_devices,
 						   ARRAY_SIZE(pxa25x_devices));
 		}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index afbf6ace954f..f8382477d629 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -24,6 +24,7 @@
 #include <linux/platform_data/i2c-pxa.h>
 #include <linux/platform_data/mmp_dma.h>
 #include <linux/soc/pxa/cpu.h>
+#include <linux/soc/pxa/smemc.h>
 
 #include <asm/mach/map.h>
 #include <asm/irq.h>
@@ -31,7 +32,9 @@
 #include "irqs.h"
 #include "pxa27x.h"
 #include "reset.h"
+#include <linux/platform_data/pxa2xx_udc.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/asoc-pxa.h>
 #include "pm.h"
 #include "addr-map.h"
 #include "smemc.h"
@@ -85,18 +88,6 @@ EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset);
  */
 static unsigned int pwrmode = PWRMODE_SLEEP;
 
-int pxa27x_set_pwrmode(unsigned int mode)
-{
-	switch (mode) {
-	case PWRMODE_SLEEP:
-	case PWRMODE_DEEPSLEEP:
-		pwrmode = mode;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
 /*
  * List of global PXA peripheral registers to preserve.
  * More ones like CP and general purpose register values are preserved
@@ -109,7 +100,7 @@ enum {
 	SLEEP_SAVE_COUNT
 };
 
-void pxa27x_cpu_pm_save(unsigned long *sleep_save)
+static void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 {
 	sleep_save[SLEEP_SAVE_MDREFR] = __raw_readl(MDREFR);
 	SAVE(PCFR);
@@ -117,7 +108,7 @@ void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 	SAVE(PSTR);
 }
 
-void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
+static void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 {
 	__raw_writel(sleep_save[SLEEP_SAVE_MDREFR], MDREFR);
 	RESTORE(PCFR);
@@ -127,14 +118,18 @@ void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 	RESTORE(PSTR);
 }
 
-void pxa27x_cpu_pm_enter(suspend_state_t state)
+static void pxa27x_cpu_pm_enter(suspend_state_t state)
 {
 	extern void pxa_cpu_standby(void);
 #ifndef CONFIG_IWMMXT
 	u64 acc0;
 
+#ifndef CONFIG_AS_IS_LLVM
 	asm volatile(".arch_extension xscale\n\t"
 		     "mra %Q0, %R0, acc0" : "=r" (acc0));
+#else
+	asm volatile("mrrc p0, 0, %Q0, %R0, c0" : "=r" (acc0));
+#endif
 #endif
 
 	/* ensure voltage-change sequencer not initiated, which hangs */
@@ -153,8 +148,12 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_MEM:
 		cpu_suspend(pwrmode, pxa27x_finish_suspend);
 #ifndef CONFIG_IWMMXT
+#ifndef CONFIG_AS_IS_LLVM
 		asm volatile(".arch_extension xscale\n\t"
 			     "mar acc0, %Q0, %R0" : "=r" (acc0));
+#else
+		asm volatile("mcrr p0, 0, %Q0, %R0, c0" :: "r" (acc0));
+#endif
 #endif
 		break;
 	}
@@ -232,6 +231,7 @@ static int pxa27x_set_wake(struct irq_data *d, unsigned int on)
 void __init pxa27x_init_irq(void)
 {
 	pxa_init_irq(34, pxa27x_set_wake);
+	set_handle_irq(pxa27x_handle_irq);
 }
 
 static int __init
@@ -276,12 +276,8 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 	pxa_register_device(&pxa27x_device_i2c_power, info);
 }
 
-static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = {
-	.irq_base	= PXA_GPIO_TO_IRQ(0),
-	.gpio_set_wake	= gpio_set_wake,
-};
-
 static struct platform_device *devices[] __initdata = {
+	&pxa27x_device_gpio,
 	&pxa27x_device_udc,
 	&pxa_device_pmu,
 	&pxa_device_i2s,
@@ -345,8 +341,7 @@ static int __init pxa27x_init(void)
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 
 		if (!of_have_populated_dt()) {
-			pxa_register_device(&pxa27x_device_gpio,
-					    &pxa27x_gpio_info);
+			software_node_register(&pxa2xx_gpiochip_node);
 			pxa2xx_set_dmac_info(&pxa27x_dma_pdata);
 			ret = platform_add_devices(devices,
 						   ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/pxa27x.h b/arch/arm/mach-pxa/pxa27x.h
index ede96f3f7214..c9d9948ae7d1 100644
--- a/arch/arm/mach-pxa/pxa27x.h
+++ b/arch/arm/mach-pxa/pxa27x.h
@@ -20,7 +20,4 @@
 #define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
 #define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
 
-extern int pxa27x_set_pwrmode(unsigned int mode);
-extern void pxa27x_cpu_pm_enter(suspend_state_t state);
-
 #endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index 4aafd692c1e8..35c23a5d73a3 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -18,7 +18,6 @@
 #include "reset.h"
 #include "smemc.h"
 #include <linux/soc/pxa/smemc.h>
-#include <linux/platform_data/irda-pxaficp.h>
 
 void pxa2xx_clear_reset_status(unsigned int mask)
 {
@@ -26,34 +25,6 @@ void pxa2xx_clear_reset_status(unsigned int mask)
 	RCSR = mask;
 }
 
-static unsigned long pxa2xx_mfp_fir[] = {
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-};
-
-static unsigned long pxa2xx_mfp_sir[] = {
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-};
-
-static unsigned long pxa2xx_mfp_off[] = {
-	GPIO46_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO47_GPIO | MFP_LPM_DRIVE_LOW,
-};
-
-void pxa2xx_transceiver_mode(struct device *dev, int mode)
-{
-	if (mode & IR_OFF) {
-		pxa2xx_mfp_config(pxa2xx_mfp_off, ARRAY_SIZE(pxa2xx_mfp_off));
-	} else if (mode & IR_SIRMODE) {
-		pxa2xx_mfp_config(pxa2xx_mfp_sir, ARRAY_SIZE(pxa2xx_mfp_sir));
-	} else if (mode & IR_FIRMODE) {
-		pxa2xx_mfp_config(pxa2xx_mfp_fir, ARRAY_SIZE(pxa2xx_mfp_fir));
-	} else
-		BUG();
-}
-EXPORT_SYMBOL_GPL(pxa2xx_transceiver_mode);
-
 #define MDCNFG_DRAC2(mdcnfg)	(((mdcnfg) >> 21) & 0x3)
 #define MDCNFG_DRAC0(mdcnfg)	(((mdcnfg) >> 5) & 0x3)
 
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
deleted file mode 100644
index c29a7f0fa1b0..000000000000
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ /dev/null
@@ -1,385 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/pxa3xx-ulpi.c
- *
- * code specific to pxa3xx aka Monahans
- *
- * Copyright (C) 2010 CompuLab Ltd.
- *
- * 2010-13-07: Igor Grinberg <grinberg@compulab.co.il>
- *             initial version: pxa310 USB Host mode support
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-#include <linux/soc/pxa/cpu.h>
-
-#include "regs-u2d.h"
-#include <linux/platform_data/usb-pxa3xx-ulpi.h>
-
-struct pxa3xx_u2d_ulpi {
-	struct clk		*clk;
-	void __iomem		*mmio_base;
-
-	struct usb_phy		*otg;
-	unsigned int		ulpi_mode;
-};
-
-static struct pxa3xx_u2d_ulpi *u2d;
-
-static inline u32 u2d_readl(u32 reg)
-{
-	return __raw_readl(u2d->mmio_base + reg);
-}
-
-static inline void u2d_writel(u32 reg, u32 val)
-{
-	__raw_writel(val, u2d->mmio_base + reg);
-}
-
-#if defined(CONFIG_PXA310_ULPI)
-enum u2d_ulpi_phy_mode {
-	SYNCH		= 0,
-	CARKIT		= (1 << 0),
-	SER_3PIN	= (1 << 1),
-	SER_6PIN	= (1 << 2),
-	LOWPOWER	= (1 << 3),
-};
-
-static inline enum u2d_ulpi_phy_mode pxa310_ulpi_get_phymode(void)
-{
-	return (u2d_readl(U2DOTGUSR) >> 28) & 0xF;
-}
-
-static int pxa310_ulpi_poll(void)
-{
-	int timeout = 50000;
-
-	while (timeout--) {
-		if (!(u2d_readl(U2DOTGUCR) & U2DOTGUCR_RUN))
-			return 0;
-
-		cpu_relax();
-	}
-
-	pr_warn("%s: ULPI access timed out!\n", __func__);
-
-	return -ETIMEDOUT;
-}
-
-static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg)
-{
-	int err;
-
-	if (pxa310_ulpi_get_phymode() != SYNCH) {
-		pr_warn("%s: PHY is not in SYNCH mode!\n", __func__);
-		return -EBUSY;
-	}
-
-	u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | U2DOTGUCR_RNW | (reg << 16));
-	msleep(5);
-
-	err = pxa310_ulpi_poll();
-	if (err)
-		return err;
-
-	return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA;
-}
-
-static int pxa310_ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
-{
-	if (pxa310_ulpi_get_phymode() != SYNCH) {
-		pr_warn("%s: PHY is not in SYNCH mode!\n", __func__);
-		return -EBUSY;
-	}
-
-	u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | (reg << 16) | (val << 8));
-	msleep(5);
-
-	return pxa310_ulpi_poll();
-}
-
-struct usb_phy_io_ops pxa310_ulpi_access_ops = {
-	.read	= pxa310_ulpi_read,
-	.write	= pxa310_ulpi_write,
-};
-
-static void pxa310_otg_transceiver_rtsm(void)
-{
-	u32 u2dotgcr;
-
-	/* put PHY to sync mode */
-	u2dotgcr = u2d_readl(U2DOTGCR);
-	u2dotgcr |=  U2DOTGCR_RTSM | U2DOTGCR_UTMID;
-	u2d_writel(U2DOTGCR, u2dotgcr);
-	msleep(10);
-
-	/* setup OTG sync mode */
-	u2dotgcr = u2d_readl(U2DOTGCR);
-	u2dotgcr |= U2DOTGCR_ULAF;
-	u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
-	u2d_writel(U2DOTGCR, u2dotgcr);
-}
-
-static int pxa310_start_otg_host_transcvr(struct usb_bus *host)
-{
-	int err;
-
-	pxa310_otg_transceiver_rtsm();
-
-	err = usb_phy_init(u2d->otg);
-	if (err) {
-		pr_err("OTG transceiver init failed");
-		return err;
-	}
-
-	err = otg_set_vbus(u2d->otg->otg, 1);
-	if (err) {
-		pr_err("OTG transceiver VBUS set failed");
-		return err;
-	}
-
-	err = otg_set_host(u2d->otg->otg, host);
-	if (err)
-		pr_err("OTG transceiver Host mode set failed");
-
-	return err;
-}
-
-static int pxa310_start_otg_hc(struct usb_bus *host)
-{
-	u32 u2dotgcr;
-	int err;
-
-	/* disable USB device controller */
-	u2d_writel(U2DCR, u2d_readl(U2DCR) & ~U2DCR_UDE);
-	u2d_writel(U2DOTGCR, u2d_readl(U2DOTGCR) | U2DOTGCR_UTMID);
-	u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
-
-	err = pxa310_start_otg_host_transcvr(host);
-	if (err)
-		return err;
-
-	/* set xceiver mode */
-	if (u2d->ulpi_mode & ULPI_IC_6PIN_SERIAL)
-		u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) & ~U2DP3CR_P2SS);
-	else if (u2d->ulpi_mode & ULPI_IC_3PIN_SERIAL)
-		u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) | U2DP3CR_P2SS);
-
-	/* start OTG host controller */
-	u2dotgcr = u2d_readl(U2DOTGCR) | U2DOTGCR_SMAF;
-	u2d_writel(U2DOTGCR, u2dotgcr & ~(U2DOTGCR_ULAF | U2DOTGCR_CKAF));
-
-	return 0;
-}
-
-static void pxa310_stop_otg_hc(void)
-{
-	pxa310_otg_transceiver_rtsm();
-
-	otg_set_host(u2d->otg->otg, NULL);
-	otg_set_vbus(u2d->otg->otg, 0);
-	usb_phy_shutdown(u2d->otg);
-}
-
-static void pxa310_u2d_setup_otg_hc(void)
-{
-	u32 u2dotgcr;
-
-	u2dotgcr = u2d_readl(U2DOTGCR);
-	u2dotgcr |= U2DOTGCR_ULAF | U2DOTGCR_UTMID;
-	u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
-	u2d_writel(U2DOTGCR, u2dotgcr);
-	msleep(5);
-	u2d_writel(U2DOTGCR, u2dotgcr | U2DOTGCR_ULE);
-	msleep(5);
-	u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
-}
-
-static int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
-{
-	unsigned int ulpi_mode = ULPI_OTG_DRVVBUS;
-
-	if (pdata) {
-		if (pdata->ulpi_mode & ULPI_SER_6PIN)
-			ulpi_mode |= ULPI_IC_6PIN_SERIAL;
-		else if (pdata->ulpi_mode & ULPI_SER_3PIN)
-			ulpi_mode |= ULPI_IC_3PIN_SERIAL;
-	}
-
-	u2d->ulpi_mode = ulpi_mode;
-
-	u2d->otg = otg_ulpi_create(&pxa310_ulpi_access_ops, ulpi_mode);
-	if (!u2d->otg)
-		return -ENOMEM;
-
-	u2d->otg->io_priv = u2d->mmio_base;
-
-	return 0;
-}
-
-static void pxa310_otg_exit(void)
-{
-	kfree(u2d->otg);
-}
-#else
-static inline void pxa310_u2d_setup_otg_hc(void) {}
-static inline int pxa310_start_otg_hc(struct usb_bus *host)
-{
-	return 0;
-}
-static inline void pxa310_stop_otg_hc(void) {}
-static inline int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
-{
-	return 0;
-}
-static inline void pxa310_otg_exit(void) {}
-#endif /* CONFIG_PXA310_ULPI */
-
-int pxa3xx_u2d_start_hc(struct usb_bus *host)
-{
-	int err = 0;
-
-	/* In case the PXA3xx ULPI isn't used, do nothing. */
-	if (!u2d)
-		return 0;
-
-	clk_prepare_enable(u2d->clk);
-
-	if (cpu_is_pxa310()) {
-		pxa310_u2d_setup_otg_hc();
-		err = pxa310_start_otg_hc(host);
-	}
-
-	return err;
-}
-EXPORT_SYMBOL_GPL(pxa3xx_u2d_start_hc);
-
-void pxa3xx_u2d_stop_hc(struct usb_bus *host)
-{
-	/* In case the PXA3xx ULPI isn't used, do nothing. */
-	if (!u2d)
-		return;
-
-	if (cpu_is_pxa310())
-		pxa310_stop_otg_hc();
-
-	clk_disable_unprepare(u2d->clk);
-}
-EXPORT_SYMBOL_GPL(pxa3xx_u2d_stop_hc);
-
-static int pxa3xx_u2d_probe(struct platform_device *pdev)
-{
-	struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
-	struct resource *r;
-	int err;
-
-	u2d = kzalloc(sizeof(*u2d), GFP_KERNEL);
-	if (!u2d)
-		return -ENOMEM;
-
-	u2d->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(u2d->clk)) {
-		dev_err(&pdev->dev, "failed to get u2d clock\n");
-		err = PTR_ERR(u2d->clk);
-		goto err_free_mem;
-	}
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!r) {
-		dev_err(&pdev->dev, "no IO memory resource defined\n");
-		err = -ENODEV;
-		goto err_put_clk;
-	}
-
-        r = request_mem_region(r->start, resource_size(r), pdev->name);
-        if (!r) {
-                dev_err(&pdev->dev, "failed to request memory resource\n");
-                err = -EBUSY;
-                goto err_put_clk;
-        }
-
-	u2d->mmio_base = ioremap(r->start, resource_size(r));
-	if (!u2d->mmio_base) {
-		dev_err(&pdev->dev, "ioremap() failed\n");
-		err = -ENODEV;
-		goto err_free_res;
-	}
-
-	if (pdata->init) {
-		err = pdata->init(&pdev->dev);
-		if (err)
-			goto err_free_io;
-	}
-
-	/* Only PXA310 U2D has OTG functionality */
-	if (cpu_is_pxa310()) {
-		err = pxa310_otg_init(pdata);
-		if (err)
-			goto err_free_plat;
-	}
-
-	platform_set_drvdata(pdev, u2d);
-
-	return 0;
-
-err_free_plat:
-	if (pdata->exit)
-		pdata->exit(&pdev->dev);
-err_free_io:
-	iounmap(u2d->mmio_base);
-err_free_res:
-	release_mem_region(r->start, resource_size(r));
-err_put_clk:
-	clk_put(u2d->clk);
-err_free_mem:
-	kfree(u2d);
-	return err;
-}
-
-static int pxa3xx_u2d_remove(struct platform_device *pdev)
-{
-	struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
-	struct resource *r;
-
-	if (cpu_is_pxa310()) {
-		pxa310_stop_otg_hc();
-		pxa310_otg_exit();
-	}
-
-	if (pdata->exit)
-		pdata->exit(&pdev->dev);
-
-	platform_set_drvdata(pdev, NULL);
-	iounmap(u2d->mmio_base);
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(r->start, resource_size(r));
-
-	clk_put(u2d->clk);
-
-	kfree(u2d);
-
-	return 0;
-}
-
-static struct platform_driver pxa3xx_u2d_ulpi_driver = {
-        .driver		= {
-                .name   = "pxa3xx-u2d",
-        },
-        .probe          = pxa3xx_u2d_probe,
-        .remove         = pxa3xx_u2d_remove,
-};
-module_platform_driver(pxa3xx_u2d_ulpi_driver);
-
-MODULE_DESCRIPTION("PXA3xx U2D ULPI driver");
-MODULE_AUTHOR("Igor Grinberg");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 979642aa7ffe..1d1e5713464d 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -108,8 +108,12 @@ static void pxa3xx_cpu_pm_suspend(void)
 #ifndef CONFIG_IWMMXT
 	u64 acc0;
 
+#ifdef CONFIG_CC_IS_GCC
 	asm volatile(".arch_extension xscale\n\t"
 		     "mra %Q0, %R0, acc0" : "=r" (acc0));
+#else
+	asm volatile("mrrc p0, 0, %Q0, %R0, c0" : "=r" (acc0));
+#endif
 #endif
 
 	/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
@@ -137,8 +141,12 @@ static void pxa3xx_cpu_pm_suspend(void)
 	AD3ER = 0;
 
 #ifndef CONFIG_IWMMXT
+#ifndef CONFIG_AS_IS_LLVM
 	asm volatile(".arch_extension xscale\n\t"
 		     "mar acc0, %Q0, %R0" : "=r" (acc0));
+#else
+	asm volatile("mcrr p0, 0, %Q0, %R0, c0" :: "r" (acc0));
+#endif
 #endif
 }
 
@@ -355,13 +363,6 @@ static void __init __pxa3xx_init_irq(void)
 	pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
 }
 
-void __init pxa3xx_init_irq(void)
-{
-	__pxa3xx_init_irq();
-	pxa_init_irq(56, pxa3xx_set_wake);
-}
-
-#ifdef CONFIG_OF
 static int __init __init
 pxa3xx_dt_init_irq(struct device_node *node, struct device_node *parent)
 {
@@ -372,7 +373,6 @@ pxa3xx_dt_init_irq(struct device_node *node, struct device_node *parent)
 	return 0;
 }
 IRQCHIP_DECLARE(pxa3xx_intc, "marvell,pxa-intc", pxa3xx_dt_init_irq);
-#endif	/* CONFIG_OF */
 
 static struct map_desc pxa3xx_io_desc[] __initdata = {
 	{	/* Mem Ctl */
@@ -395,73 +395,6 @@ void __init pxa3xx_map_io(void)
 	pxa3xx_get_clk_frequency_khz(1);
 }
 
-/*
- * device registration specific to PXA3xx.
- */
-
-void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_i2c_power, info);
-}
-
-static struct pxa_gpio_platform_data pxa3xx_gpio_pdata = {
-	.irq_base	= PXA_GPIO_TO_IRQ(0),
-};
-
-static struct platform_device *devices[] __initdata = {
-	&pxa27x_device_udc,
-	&pxa_device_pmu,
-	&pxa_device_i2s,
-	&pxa_device_asoc_ssp1,
-	&pxa_device_asoc_ssp2,
-	&pxa_device_asoc_ssp3,
-	&pxa_device_asoc_ssp4,
-	&pxa_device_asoc_platform,
-	&pxa_device_rtc,
-	&pxa3xx_device_ssp1,
-	&pxa3xx_device_ssp2,
-	&pxa3xx_device_ssp3,
-	&pxa3xx_device_ssp4,
-	&pxa27x_device_pwm0,
-	&pxa27x_device_pwm1,
-};
-
-static const struct dma_slave_map pxa3xx_slave_map[] = {
-	/* PXA25x, PXA27x and PXA3xx common entries */
-	{ "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
-	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
-	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
-	  PDMA_FILTER_PARAM(LOWEST, 10) },
-	{ "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
-	{ "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
-	{ "pxa-ssp-dai.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
-	{ "pxa-ssp-dai.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
-	{ "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
-	{ "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
-	{ "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
-	{ "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
-	{ "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
-	{ "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
-	{ "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 66) },
-	{ "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 67) },
-
-	/* PXA3xx specific map */
-	{ "pxa-ssp-dai.3", "rx", PDMA_FILTER_PARAM(LOWEST, 2) },
-	{ "pxa-ssp-dai.3", "tx", PDMA_FILTER_PARAM(LOWEST, 3) },
-	{ "pxa2xx-mci.1", "rx", PDMA_FILTER_PARAM(LOWEST, 93) },
-	{ "pxa2xx-mci.1", "tx", PDMA_FILTER_PARAM(LOWEST, 94) },
-	{ "pxa3xx-nand", "data", PDMA_FILTER_PARAM(LOWEST, 97) },
-	{ "pxa2xx-mci.2", "rx", PDMA_FILTER_PARAM(LOWEST, 100) },
-	{ "pxa2xx-mci.2", "tx", PDMA_FILTER_PARAM(LOWEST, 101) },
-};
-
-static struct mmp_dma_platdata pxa3xx_dma_pdata = {
-	.dma_channels	= 32,
-	.nb_requestors	= 100,
-	.slave_map	= pxa3xx_slave_map,
-	.slave_map_cnt	= ARRAY_SIZE(pxa3xx_slave_map),
-};
-
 static int __init pxa3xx_init(void)
 {
 	int ret = 0;
@@ -493,20 +426,6 @@ static int __init pxa3xx_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
-
-		if (of_have_populated_dt())
-			return 0;
-
-		pxa2xx_set_dmac_info(&pxa3xx_dma_pdata);
-		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-		if (ret)
-			return ret;
-		if (cpu_is_pxa300() || cpu_is_pxa310() || cpu_is_pxa320()) {
-			platform_device_add_data(&pxa3xx_device_gpio,
-						 &pxa3xx_gpio_pdata,
-						 sizeof(pxa3xx_gpio_pdata));
-			ret = platform_device_register(&pxa3xx_device_gpio);
-		}
 	}
 
 	return ret;
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
deleted file mode 100644
index b9021a40cbd1..000000000000
--- a/arch/arm/mach-pxa/pxa930.c
+++ /dev/null
@@ -1,217 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/pxa930.c
- *
- * Code specific to PXA930
- *
- * Copyright (C) 2007-2008 Marvell Internation Ltd.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/irq.h>
-#include <linux/gpio-pxa.h>
-#include <linux/platform_device.h>
-#include <linux/soc/pxa/cpu.h>
-
-#include "pxa930.h"
-
-#include "devices.h"
-
-static struct mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
-
-	MFP_ADDR(GPIO0, 0x02e0),
-	MFP_ADDR(GPIO1, 0x02dc),
-	MFP_ADDR(GPIO2, 0x02e8),
-	MFP_ADDR(GPIO3, 0x02d8),
-	MFP_ADDR(GPIO4, 0x02e4),
-	MFP_ADDR(GPIO5, 0x02ec),
-	MFP_ADDR(GPIO6, 0x02f8),
-	MFP_ADDR(GPIO7, 0x02fc),
-	MFP_ADDR(GPIO8, 0x0300),
-	MFP_ADDR(GPIO9, 0x02d4),
-	MFP_ADDR(GPIO10, 0x02f4),
-	MFP_ADDR(GPIO11, 0x02f0),
-	MFP_ADDR(GPIO12, 0x0304),
-	MFP_ADDR(GPIO13, 0x0310),
-	MFP_ADDR(GPIO14, 0x0308),
-	MFP_ADDR(GPIO15, 0x030c),
-	MFP_ADDR(GPIO16, 0x04e8),
-	MFP_ADDR(GPIO17, 0x04f4),
-	MFP_ADDR(GPIO18, 0x04f8),
-	MFP_ADDR(GPIO19, 0x04fc),
-	MFP_ADDR(GPIO20, 0x0518),
-	MFP_ADDR(GPIO21, 0x051c),
-	MFP_ADDR(GPIO22, 0x04ec),
-	MFP_ADDR(GPIO23, 0x0500),
-	MFP_ADDR(GPIO24, 0x04f0),
-	MFP_ADDR(GPIO25, 0x0504),
-	MFP_ADDR(GPIO26, 0x0510),
-	MFP_ADDR(GPIO27, 0x0514),
-	MFP_ADDR(GPIO28, 0x0520),
-	MFP_ADDR(GPIO29, 0x0600),
-	MFP_ADDR(GPIO30, 0x0618),
-	MFP_ADDR(GPIO31, 0x0610),
-	MFP_ADDR(GPIO32, 0x060c),
-	MFP_ADDR(GPIO33, 0x061c),
-	MFP_ADDR(GPIO34, 0x0620),
-	MFP_ADDR(GPIO35, 0x0628),
-	MFP_ADDR(GPIO36, 0x062c),
-	MFP_ADDR(GPIO37, 0x0630),
-	MFP_ADDR(GPIO38, 0x0634),
-	MFP_ADDR(GPIO39, 0x0638),
-	MFP_ADDR(GPIO40, 0x063c),
-	MFP_ADDR(GPIO41, 0x0614),
-	MFP_ADDR(GPIO42, 0x0624),
-	MFP_ADDR(GPIO43, 0x0608),
-	MFP_ADDR(GPIO44, 0x0604),
-	MFP_ADDR(GPIO45, 0x050c),
-	MFP_ADDR(GPIO46, 0x0508),
-	MFP_ADDR(GPIO47, 0x02bc),
-	MFP_ADDR(GPIO48, 0x02b4),
-	MFP_ADDR(GPIO49, 0x02b8),
-	MFP_ADDR(GPIO50, 0x02c8),
-	MFP_ADDR(GPIO51, 0x02c0),
-	MFP_ADDR(GPIO52, 0x02c4),
-	MFP_ADDR(GPIO53, 0x02d0),
-	MFP_ADDR(GPIO54, 0x02cc),
-	MFP_ADDR(GPIO55, 0x029c),
-	MFP_ADDR(GPIO56, 0x02a0),
-	MFP_ADDR(GPIO57, 0x0294),
-	MFP_ADDR(GPIO58, 0x0298),
-	MFP_ADDR(GPIO59, 0x02a4),
-	MFP_ADDR(GPIO60, 0x02a8),
-	MFP_ADDR(GPIO61, 0x02b0),
-	MFP_ADDR(GPIO62, 0x02ac),
-	MFP_ADDR(GPIO63, 0x0640),
-	MFP_ADDR(GPIO64, 0x065c),
-	MFP_ADDR(GPIO65, 0x0648),
-	MFP_ADDR(GPIO66, 0x0644),
-	MFP_ADDR(GPIO67, 0x0674),
-	MFP_ADDR(GPIO68, 0x0658),
-	MFP_ADDR(GPIO69, 0x0654),
-	MFP_ADDR(GPIO70, 0x0660),
-	MFP_ADDR(GPIO71, 0x0668),
-	MFP_ADDR(GPIO72, 0x0664),
-	MFP_ADDR(GPIO73, 0x0650),
-	MFP_ADDR(GPIO74, 0x066c),
-	MFP_ADDR(GPIO75, 0x064c),
-	MFP_ADDR(GPIO76, 0x0670),
-	MFP_ADDR(GPIO77, 0x0678),
-	MFP_ADDR(GPIO78, 0x067c),
-	MFP_ADDR(GPIO79, 0x0694),
-	MFP_ADDR(GPIO80, 0x069c),
-	MFP_ADDR(GPIO81, 0x06a0),
-	MFP_ADDR(GPIO82, 0x06a4),
-	MFP_ADDR(GPIO83, 0x0698),
-	MFP_ADDR(GPIO84, 0x06bc),
-	MFP_ADDR(GPIO85, 0x06b4),
-	MFP_ADDR(GPIO86, 0x06b0),
-	MFP_ADDR(GPIO87, 0x06c0),
-	MFP_ADDR(GPIO88, 0x06c4),
-	MFP_ADDR(GPIO89, 0x06ac),
-	MFP_ADDR(GPIO90, 0x0680),
-	MFP_ADDR(GPIO91, 0x0684),
-	MFP_ADDR(GPIO92, 0x0688),
-	MFP_ADDR(GPIO93, 0x0690),
-	MFP_ADDR(GPIO94, 0x068c),
-	MFP_ADDR(GPIO95, 0x06a8),
-	MFP_ADDR(GPIO96, 0x06b8),
-	MFP_ADDR(GPIO97, 0x0410),
-	MFP_ADDR(GPIO98, 0x0418),
-	MFP_ADDR(GPIO99, 0x041c),
-	MFP_ADDR(GPIO100, 0x0414),
-	MFP_ADDR(GPIO101, 0x0408),
-	MFP_ADDR(GPIO102, 0x0324),
-	MFP_ADDR(GPIO103, 0x040c),
-	MFP_ADDR(GPIO104, 0x0400),
-	MFP_ADDR(GPIO105, 0x0328),
-	MFP_ADDR(GPIO106, 0x0404),
-
-	MFP_ADDR(nXCVREN, 0x0204),
-	MFP_ADDR(DF_CLE_nOE, 0x020c),
-	MFP_ADDR(DF_nADV1_ALE, 0x0218),
-	MFP_ADDR(DF_SCLK_E, 0x0214),
-	MFP_ADDR(DF_SCLK_S, 0x0210),
-	MFP_ADDR(nBE0, 0x021c),
-	MFP_ADDR(nBE1, 0x0220),
-	MFP_ADDR(DF_nADV2_ALE, 0x0224),
-	MFP_ADDR(DF_INT_RnB, 0x0228),
-	MFP_ADDR(DF_nCS0, 0x022c),
-	MFP_ADDR(DF_nCS1, 0x0230),
-	MFP_ADDR(nLUA, 0x0254),
-	MFP_ADDR(nLLA, 0x0258),
-	MFP_ADDR(DF_nWE, 0x0234),
-	MFP_ADDR(DF_nRE_nOE, 0x0238),
-	MFP_ADDR(DF_ADDR0, 0x024c),
-	MFP_ADDR(DF_ADDR1, 0x0250),
-	MFP_ADDR(DF_ADDR2, 0x025c),
-	MFP_ADDR(DF_ADDR3, 0x0260),
-	MFP_ADDR(DF_IO0, 0x023c),
-	MFP_ADDR(DF_IO1, 0x0240),
-	MFP_ADDR(DF_IO2, 0x0244),
-	MFP_ADDR(DF_IO3, 0x0248),
-	MFP_ADDR(DF_IO4, 0x0264),
-	MFP_ADDR(DF_IO5, 0x0268),
-	MFP_ADDR(DF_IO6, 0x026c),
-	MFP_ADDR(DF_IO7, 0x0270),
-	MFP_ADDR(DF_IO8, 0x0274),
-	MFP_ADDR(DF_IO9, 0x0278),
-	MFP_ADDR(DF_IO10, 0x027c),
-	MFP_ADDR(DF_IO11, 0x0280),
-	MFP_ADDR(DF_IO12, 0x0284),
-	MFP_ADDR(DF_IO13, 0x0288),
-	MFP_ADDR(DF_IO14, 0x028c),
-	MFP_ADDR(DF_IO15, 0x0290),
-
-	MFP_ADDR(GSIM_UIO, 0x0314),
-	MFP_ADDR(GSIM_UCLK, 0x0318),
-	MFP_ADDR(GSIM_UDET, 0x031c),
-	MFP_ADDR(GSIM_nURST, 0x0320),
-
-	MFP_ADDR(PMIC_INT, 0x06c8),
-
-	MFP_ADDR(RDY, 0x0200),
-
-	MFP_ADDR_END,
-};
-
-static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
-	MFP_ADDR(GPIO159, 0x0524),
-	MFP_ADDR(GPIO163, 0x0534),
-	MFP_ADDR(GPIO167, 0x0544),
-	MFP_ADDR(GPIO168, 0x0548),
-	MFP_ADDR(GPIO169, 0x054c),
-	MFP_ADDR(GPIO170, 0x0550),
-	MFP_ADDR(GPIO171, 0x0554),
-	MFP_ADDR(GPIO172, 0x0558),
-	MFP_ADDR(GPIO173, 0x055c),
-
-	MFP_ADDR_END,
-};
-
-static struct pxa_gpio_platform_data pxa93x_gpio_pdata = {
-	.irq_base	= PXA_GPIO_TO_IRQ(0),
-};
-
-static int __init pxa930_init(void)
-{
-	int ret = 0;
-
-	if (cpu_is_pxa93x()) {
-		mfp_init_base(io_p2v(MFPR_BASE));
-		mfp_init_addr(pxa930_mfp_addr_map);
-		platform_device_add_data(&pxa93x_device_gpio,
-					 &pxa93x_gpio_pdata,
-					 sizeof(pxa93x_gpio_pdata));
-		ret = platform_device_register(&pxa93x_device_gpio);
-	}
-
-	if (cpu_is_pxa935())
-		mfp_init_addr(pxa935_mfp_addr_map);
-
-	return 0;
-}
-
-core_initcall(pxa930_init);
diff --git a/arch/arm/mach-pxa/pxa930.h b/arch/arm/mach-pxa/pxa930.h
deleted file mode 100644
index bbf25c044641..000000000000
--- a/arch/arm/mach-pxa/pxa930.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_PXA930_H
-#define __MACH_PXA930_H
-
-#include "pxa3xx.h"
-#include "mfp-pxa930.h"
-
-#endif /* __MACH_PXA930_H */
diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c
deleted file mode 100644
index eda5a47d7fbb..000000000000
--- a/arch/arm/mach-pxa/pxa_cplds_irqs.c
+++ /dev/null
@@ -1,200 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Intel Reference Systems cplds
- *
- * Copyright (C) 2014 Robert Jarzmik
- *
- * Cplds motherboard driver, supporting lubbock and mainstone SoC board.
- */
-
-#include <linux/bitops.h>
-#include <linux/gpio.h>
-#include <linux/gpio/consumer.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/mfd/core.h>
-#include <linux/module.h>
-#include <linux/of_platform.h>
-
-#define FPGA_IRQ_MASK_EN 0x0
-#define FPGA_IRQ_SET_CLR 0x10
-
-#define CPLDS_NB_IRQ	32
-
-struct cplds {
-	void __iomem *base;
-	int irq;
-	unsigned int irq_mask;
-	struct gpio_desc *gpio0;
-	struct irq_domain *irqdomain;
-};
-
-static irqreturn_t cplds_irq_handler(int in_irq, void *d)
-{
-	struct cplds *fpga = d;
-	unsigned long pending;
-	unsigned int bit;
-
-	do {
-		pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
-		for_each_set_bit(bit, &pending, CPLDS_NB_IRQ)
-			generic_handle_domain_irq(fpga->irqdomain, bit);
-	} while (pending);
-
-	return IRQ_HANDLED;
-}
-
-static void cplds_irq_mask(struct irq_data *d)
-{
-	struct cplds *fpga = irq_data_get_irq_chip_data(d);
-	unsigned int cplds_irq = irqd_to_hwirq(d);
-	unsigned int bit = BIT(cplds_irq);
-
-	fpga->irq_mask &= ~bit;
-	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
-}
-
-static void cplds_irq_unmask(struct irq_data *d)
-{
-	struct cplds *fpga = irq_data_get_irq_chip_data(d);
-	unsigned int cplds_irq = irqd_to_hwirq(d);
-	unsigned int set, bit = BIT(cplds_irq);
-
-	set = readl(fpga->base + FPGA_IRQ_SET_CLR);
-	writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
-
-	fpga->irq_mask |= bit;
-	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
-}
-
-static struct irq_chip cplds_irq_chip = {
-	.name		= "pxa_cplds",
-	.irq_ack	= cplds_irq_mask,
-	.irq_mask	= cplds_irq_mask,
-	.irq_unmask	= cplds_irq_unmask,
-	.flags		= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
-};
-
-static int cplds_irq_domain_map(struct irq_domain *d, unsigned int irq,
-				   irq_hw_number_t hwirq)
-{
-	struct cplds *fpga = d->host_data;
-
-	irq_set_chip_and_handler(irq, &cplds_irq_chip, handle_level_irq);
-	irq_set_chip_data(irq, fpga);
-
-	return 0;
-}
-
-static const struct irq_domain_ops cplds_irq_domain_ops = {
-	.xlate = irq_domain_xlate_twocell,
-	.map = cplds_irq_domain_map,
-};
-
-static int cplds_resume(struct platform_device *pdev)
-{
-	struct cplds *fpga = platform_get_drvdata(pdev);
-
-	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
-
-	return 0;
-}
-
-static int cplds_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	struct cplds *fpga;
-	int ret;
-	int base_irq;
-	unsigned long irqflags = 0;
-
-	fpga = devm_kzalloc(&pdev->dev, sizeof(*fpga), GFP_KERNEL);
-	if (!fpga)
-		return -ENOMEM;
-
-	fpga->irq = platform_get_irq(pdev, 0);
-	if (fpga->irq <= 0)
-		return fpga->irq;
-
-	base_irq = platform_get_irq(pdev, 1);
-	if (base_irq < 0) {
-		base_irq = 0;
-	} else {
-		ret = devm_irq_alloc_descs(&pdev->dev, base_irq, base_irq, CPLDS_NB_IRQ, 0);
-		if (ret < 0)
-			return ret;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	fpga->base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(fpga->base))
-		return PTR_ERR(fpga->base);
-
-	platform_set_drvdata(pdev, fpga);
-
-	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
-	writel(0, fpga->base + FPGA_IRQ_SET_CLR);
-
-	irqflags = irq_get_trigger_type(fpga->irq);
-	ret = devm_request_irq(&pdev->dev, fpga->irq, cplds_irq_handler,
-			       irqflags, dev_name(&pdev->dev), fpga);
-	if (ret == -ENOSYS)
-		return -EPROBE_DEFER;
-
-	if (ret) {
-		dev_err(&pdev->dev, "couldn't request main irq%d: %d\n",
-			fpga->irq, ret);
-		return ret;
-	}
-
-	irq_set_irq_wake(fpga->irq, 1);
-	if (base_irq)
-		fpga->irqdomain = irq_domain_add_legacy(pdev->dev.of_node,
-							CPLDS_NB_IRQ,
-							base_irq, 0,
-							&cplds_irq_domain_ops,
-							fpga);
-	else
-		fpga->irqdomain = irq_domain_add_linear(pdev->dev.of_node,
-							CPLDS_NB_IRQ,
-							&cplds_irq_domain_ops,
-							fpga);
-	if (!fpga->irqdomain)
-		return -ENODEV;
-
-	return 0;
-}
-
-static int cplds_remove(struct platform_device *pdev)
-{
-	struct cplds *fpga = platform_get_drvdata(pdev);
-
-	irq_set_chip_and_handler(fpga->irq, NULL, NULL);
-
-	return 0;
-}
-
-static const struct of_device_id cplds_id_table[] = {
-	{ .compatible = "intel,lubbock-cplds-irqs", },
-	{ .compatible = "intel,mainstone-cplds-irqs", },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, cplds_id_table);
-
-static struct platform_driver cplds_driver = {
-	.driver		= {
-		.name	= "pxa_cplds_irqs",
-		.of_match_table = of_match_ptr(cplds_id_table),
-	},
-	.probe		= cplds_probe,
-	.remove		= cplds_remove,
-	.resume		= cplds_resume,
-};
-
-module_platform_driver(cplds_driver);
-
-MODULE_DESCRIPTION("PXA Cplds interrupts driver");
-MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/regs-u2d.h b/arch/arm/mach-pxa/regs-u2d.h
deleted file mode 100644
index ab517ba62c9a..000000000000
--- a/arch/arm/mach-pxa/regs-u2d.h
+++ /dev/null
@@ -1,199 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_PXA3xx_U2D_H
-#define __ASM_ARCH_PXA3xx_U2D_H
-
-/*
- * USB2 device controller registers and bits definitions
- */
-#define U2DCR		(0x0000)	/* U2D Control Register */
-#define U2DCR_NDC	(1   << 31)	/* NAK During Config */
-#define U2DCR_HSTC	(0x7 << 28)	/* High Speed Timeout Calibration */
-#define U2DCR_SPEOREN	(1   << 27)	/* Short Packet EOR INTR generation Enable */
-#define U2DCR_FSTC	(0x7 << 24)	/* Full Speed Timeout Calibration */
-#define U2DCR_UCLKOVR	(1   << 22)	/* UTM Clock Override */
-#define U2DCR_ABP	(1   << 21)	/* Application Bus Power */
-#define U2DCR_ADD	(1   << 20)	/* Application Device Disconnect */
-#define U2DCR_CC	(1   << 19)	/* Configuration Change */
-#define U2DCR_HS	(1   << 18)	/* High Speed USB Detection */
-#define U2DCR_SMAC	(1   << 17)	/* Switch Endpoint Memory to Active Configuration */
-#define U2DCR_DWRE	(1   << 16)	/* Device Remote Wake-up Feature */
-#define U2DCR_ACN	(0xf << 12)	/* Active U2D Configuration Number */
-#define U2DCR_AIN	(0xf << 8)	/* Active U2D Interface Number */
-#define U2DCR_AAISN	(0xf << 4)	/* Active U2D Alternate Interface Setting Number */
-#define U2DCR_EMCE	(1   << 3)	/* Endpoint Memory Configuration Error */
-#define U2DCR_UDR	(1   << 2)	/* U2D Resume */
-#define U2DCR_UDA	(1   << 1)	/* U2D Active */
-#define U2DCR_UDE	(1   << 0)	/* U2D Enable */
-
-#define U2DICR			(0x0004)	/* U2D Interrupt Control Register */
-#define U2DISR			(0x000C)	/* U2D Interrupt Status Register */
-#define U2DINT_CC		(1 << 31)	/* Interrupt - Configuration Change */
-#define U2DINT_SOF		(1 << 30)	/* Interrupt - SOF */
-#define U2DINT_USOF		(1 << 29)	/* Interrupt - micro SOF */
-#define U2DINT_RU		(1 << 28)	/* Interrupt - Resume */
-#define U2DINT_SU		(1 << 27)	/* Interrupt - Suspend */
-#define U2DINT_RS		(1 << 26)	/* Interrupt - Reset */
-#define U2DINT_DPE		(1 << 25)	/* Interrupt - Data Packet Error */
-#define U2DINT_FIFOERR		(0x4)		/* Interrupt - endpoint FIFO error */
-#define U2DINT_PACKETCMP	(0x2)		/* Interrupt - endpoint packet complete */
-#define U2DINT_SPACKETCMP	(0x1)		/* Interrupt - endpoint short packet complete */
-
-#define U2DFNR			(0x0014)	/* U2D Frame Number Register */
-
-#define U2DINT(n, intr)		(((intr) & 0x07) << (((n) & 0x07) * 3))
-#define U2DICR2			(0x0008)	/* U2D Interrupt Control Register 2 */
-#define U2DISR2			(0x0010)	/* U2D Interrupt Status Register 2 */
-
-#define U2DOTGCR		(0x0020)	/* U2D OTG Control Register */
-#define U2DOTGCR_OTGEN		(1 << 31)	/* On-The-Go Enable */
-#define U2DOTGCR_AALTHNP	(1 << 30)	/* A-device Alternate Host Negotiation Protocal Port Support */
-#define U2DOTGCR_AHNP		(1 << 29)	/* A-device Host Negotiation Protocal Support */
-#define U2DOTGCR_BHNP		(1 << 28)	/* B-device Host Negotiation Protocal Enable */
-
-#ifdef CONFIG_CPU_PXA930
-#define U2DOTGCR_LPA		(1 << 15)	/* ULPI low power mode active */
-#define U2DOTGCR_IESI		(1 << 13)	/* OTG interrupt Enable */
-#define U2DOTGCR_ISSI		(1 << 12)	/* OTG interrupt status */
-#endif
-
-#define U2DOTGCR_CKAF	(1 << 5)	/* Carkit Mode Alternate Function Select */
-#define U2DOTGCR_UTMID	(1 << 4)	/* UTMI Interface Disable */
-#define U2DOTGCR_ULAF	(1 << 3)	/* ULPI Mode Alternate Function Select */
-#define U2DOTGCR_SMAF	(1 << 2)	/* Serial Mode Alternate Function Select */
-#define U2DOTGCR_RTSM	(1 << 1)	/* Return to Synchronous Mode (ULPI Mode) */
-#define U2DOTGCR_ULE	(1 << 0)	/* ULPI Wrapper Enable */
-
-#define U2DOTGICR	(0x0024)	/* U2D OTG Interrupt Control Register */
-#define U2DOTGISR	(0x0028)	/* U2D OTG Interrupt Status Register */
-
-#define U2DOTGINT_SF	(1 << 17)	/* OTG Set Feature Command Received */
-#define U2DOTGINT_SI	(1 << 16)	/* OTG Interrupt */
-#define U2DOTGINT_RLS1	(1 << 14)	/* RXCMD Linestate[1] Change Interrupt Rise */
-#define U2DOTGINT_RLS0	(1 << 13)	/* RXCMD Linestate[0] Change Interrupt Rise */
-#define U2DOTGINT_RID	(1 << 12)	/* RXCMD OTG ID Change Interrupt Rise */
-#define U2DOTGINT_RSE	(1 << 11)	/* RXCMD OTG Session End Interrupt Rise */
-#define U2DOTGINT_RSV	(1 << 10)	/* RXCMD OTG Session Valid Interrupt Rise */
-#define U2DOTGINT_RVV	(1 << 9)	/* RXCMD OTG Vbus Valid Interrupt Rise */
-#define U2DOTGINT_RCK	(1 << 8)	/* RXCMD Carkit Interrupt Rise */
-#define U2DOTGINT_FLS1	(1 << 6)	/* RXCMD Linestate[1] Change Interrupt Fall */
-#define U2DOTGINT_FLS0	(1 << 5)	/* RXCMD Linestate[0] Change Interrupt Fall */
-#define U2DOTGINT_FID	(1 << 4)	/* RXCMD OTG ID Change Interrupt Fall */
-#define U2DOTGINT_FSE	(1 << 3)	/* RXCMD OTG Session End Interrupt Fall */
-#define U2DOTGINT_FSV	(1 << 2)	/* RXCMD OTG Session Valid Interrupt Fall */
-#define U2DOTGINT_FVV	(1 << 1)	/* RXCMD OTG Vbus Valid Interrupt Fall */
-#define U2DOTGINT_FCK	(1 << 0)	/* RXCMD Carkit Interrupt Fall */
-
-#define U2DOTGUSR	(0x002C)	/* U2D OTG ULPI Status Register */
-#define U2DOTGUSR_LPA	(1 << 31)	/* ULPI Low Power Mode Active */
-#define U2DOTGUSR_S6A	(1 << 30)	/* ULPI Serial Mode (6-pin) Active */
-#define U2DOTGUSR_S3A	(1 << 29)	/* ULPI Serial Mode (3-pin) Active */
-#define U2DOTGUSR_CKA	(1 << 28)	/* ULPI Car Kit Mode Active */
-#define U2DOTGUSR_LS1	(1 << 6)	/* RXCMD Linestate 1 Status */
-#define U2DOTGUSR_LS0	(1 << 5)	/* RXCMD Linestate 0 Status */
-#define U2DOTGUSR_ID	(1 << 4)	/* OTG IDGnd Status */
-#define U2DOTGUSR_SE	(1 << 3)	/* OTG Session End Status */
-#define U2DOTGUSR_SV	(1 << 2)	/* OTG Session Valid Status */
-#define U2DOTGUSR_VV	(1 << 1)	/* OTG Vbus Valid Status */
-#define U2DOTGUSR_CK	(1 << 0)	/* Carkit Interrupt Status */
-
-#define U2DOTGUCR	(0x0030)	/* U2D OTG ULPI Control Register */
-#define U2DOTGUCR_RUN	(1    << 25)	/* RUN */
-#define U2DOTGUCR_RNW	(1    << 24)	/* Read or Write operation */
-#define U2DOTGUCR_ADDR	(0x3f << 16)	/* Address of the ULPI PHY register */
-#define U2DOTGUCR_WDATA	(0xff << 8)	/* The data for a WRITE command */
-#define U2DOTGUCR_RDATA	(0xff << 0)	/* The data for a READ command */
-
-#define U2DP3CR		(0x0034)	/* U2D Port 3 Control Register */
-#define U2DP3CR_P2SS	(0x3 << 8)	/* Host Port 2 Serial Mode Select */
-#define U2DP3CR_P3SS	(0x7 << 4)	/* Host Port 3 Serial Mode Select */
-#define U2DP3CR_VPVMBEN	(0x1 << 2)	/* Host Port 3 Vp/Vm Block Enable */
-#define U2DP3CR_CFG	(0x3 << 0)	/* Host Port 3 Configuration */
-
-#define U2DCSR0		(0x0100)	/* U2D Control/Status Register - Endpoint 0 */
-#define U2DCSR0_IPA	(1 << 8)	/* IN Packet Adjusted */
-#define U2DCSR0_SA	(1 << 7)	/* SETUP Active */
-#define U2DCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
-#define U2DCSR0_FST	(1 << 5)	/* Force Stall */
-#define U2DCSR0_SST	(1 << 4)	/* Send Stall */
-#define U2DCSR0_DME	(1 << 3)	/* DMA Enable */
-#define U2DCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
-#define U2DCSR0_IPR	(1 << 1)	/* IN Packet Ready */
-#define U2DCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
-
-#define U2DCSR(x)	(0x0100 + ((x) << 2))	/* U2D Control/Status Register - Endpoint x */
-#define U2DCSR_BF	(1 << 10)	/* Buffer Full, for OUT eps */
-#define U2DCSR_BE	(1 << 10)	/* Buffer Empty, for IN eps */
-#define U2DCSR_DPE	(1 << 9)	/* Data Packet Error, for ISO eps only */
-#define U2DCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
-#define U2DCSR_SP	(1 << 7)	/* Short Packet Control/Status, for OUT eps only, readonly */
-#define U2DCSR_BNE	(1 << 6)	/* Buffer Not Empty, for OUT eps */
-#define U2DCSR_BNF	(1 << 6)	/* Buffer Not Full, for IN eps */
-#define U2DCSR_FST	(1 << 5)	/* Force STALL, write 1 set */
-#define U2DCSR_SST	(1 << 4)	/* Sent STALL, write 1 clear */
-#define U2DCSR_DME	(1 << 3)	/* DMA Enable */
-#define U2DCSR_TRN	(1 << 2)	/* Tx/Rx NAK, write 1 clear */
-#define U2DCSR_PC	(1 << 1)	/* Packet Complete, write 1 clear */
-#define U2DCSR_FS	(1 << 0)	/* FIFO needs Service */
-
-#define U2DBCR0		(0x0200)		/* U2D Byte Count Register - Endpoint 0 */
-#define U2DBCR(x)	(0x0200 + ((x) << 2))	/* U2D Byte Count Register - Endpoint x */
-
-#define U2DDR0		(0x0300)		/* U2D Data Register - Endpoint 0 */
-
-#define U2DEPCR(x)	(0x0400 + ((x) << 2))	/* U2D Configuration Register - Endpoint x */
-#define U2DEPCR_EE	(1 << 0)		/* Endpoint Enable */
-#define U2DEPCR_BS_MASK	(0x3FE)			/* Buffer Size, BS*8=FIFO size, max 8184B = 8KB */
-
-#define U2DSCA		(0x0500)		/* U2D Setup Command Address */
-#define U2DSCA_VALUE	(0x0120)
-
-#define U2DEN0		(0x0504)		/* U2D Endpoint Information Register - Endpoint 0 */
-#define U2DEN(x)	(0x0504 + ((x) << 2))	/* U2D Endpoint Information Register - Endpoint x */
-
-/* U2DMA registers */
-#define U2DMACSR0		(0x1000)	/* U2DMA Control/Status Register - Channel 0 */
-#define U2DMACSR(x)		(0x1000 + ((x) << 2))	/* U2DMA Control/Status Register - Channel x */
-#define U2DMACSR_RUN		(1 << 31)	/* Run Bit (read / write) */
-#define U2DMACSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
-#define U2DMACSR_EORIRQEN	(1 << 28)	/* End of Receive Interrupt Enable (R/W) */
-#define U2DMACSR_EORJMPEN	(1 << 27)	/* Jump to next descriptor on EOR */
-#define U2DMACSR_EORSTOPEN	(1 << 26)	/* STOP on an EOR */
-#define U2DMACSR_RASIRQEN	(1 << 23)	/* Request After Cnannel Stopped Interrupt Enable */
-#define U2DMACSR_MASKRUN	(1 << 22)	/* Mask Run */
-#define U2DMACSR_SCEMC		(3 << 18)	/* System Bus Split Completion Error Message Class */
-#define U2DMACSR_SCEMI		(0x1f << 13)	/* System Bus Split Completion Error Message Index */
-#define U2DMACSR_BUSERRTYPE	(7 << 10)	/* PX Bus Error Type */
-#define U2DMACSR_EORINTR	(1 << 9)	/* End Of Receive */
-#define U2DMACSR_REQPEND	(1 << 8)	/* Request Pending */
-#define U2DMACSR_RASINTR	(1 << 4)	/* Request After Channel Stopped (read / write 1 clear) */
-#define U2DMACSR_STOPINTR	(1 << 3)	/* Stop Interrupt (read only) */
-#define U2DMACSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write 1 clear) */
-#define U2DMACSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write 1 clear) */
-#define U2DMACSR_BUSERRINTR	(1 << 0)	/* Bus Error Interrupt (read / write 1 clear) */
-
-#define U2DMACR		(0x1080)		/* U2DMA Control Register */
-#define U2DMAINT	(0x10F0)		/* U2DMA Interrupt Register */
-
-#define U2DMABR0	(0x1100)		/* U2DMA Branch Register - Channel 0 */
-#define U2DMABR(x)      (0x1100 + (x) << 2)	/* U2DMA Branch Register - Channel x */
-
-#define U2DMADADR0      (0x1200)		/* U2DMA Descriptor Address Register - Channel 0 */
-#define U2DMADADR(x)    (0x1200 + (x) * 0x10)	/* U2DMA Descriptor Address Register - Channel x */
-
-#define U2DMADADR_STOP	(1U << 0)
-
-#define U2DMASADR0	(0x1204)		/* U2DMA Source Address Register - Channel 0 */
-#define U2DMASADR(x)	(0x1204 + (x) * 0x10)	/* U2DMA Source Address Register - Channel x */
-#define U2DMATADR0	(0x1208)		/* U2DMA Target Address Register - Channel 0 */
-#define U2DMATADR(x)	(0x1208 + (x) * 0x10)	/* U2DMA Target Address Register - Channel x */
-
-#define U2DMACMDR0	(0x120C)		/* U2DMA Command Address Register - Channel 0 */
-#define U2DMACMDR(x)	(0x120C + (x) * 0x10)	/* U2DMA Command Address Register - Channel x */
-
-#define U2DMACMDR_XFRDIS	(1 << 31)	/* Transfer Direction */
-#define U2DMACMDR_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
-#define U2DMACMDR_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
-#define U2DMACMDR_PACKCOMP	(1 << 13)	/* Packet Complete */
-#define U2DMACMDR_LEN		(0x07ff)	/* length mask (max = 2K - 1) */
-
-#endif /* __ASM_ARCH_PXA3xx_U2D_H */
diff --git a/arch/arm/mach-pxa/regs-uart.h b/arch/arm/mach-pxa/regs-uart.h
deleted file mode 100644
index 490e9ca16297..000000000000
--- a/arch/arm/mach-pxa/regs-uart.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_REGS_UART_H
-#define __ASM_ARCH_REGS_UART_H
-
-#include "pxa-regs.h"
-
-/*
- * UARTs
- */
-
-/* Full Function UART (FFUART) */
-#define FFUART		FFRBR
-#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
-#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
-#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
-#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
-#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
-#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
-#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
-#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
-#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
-#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
-#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
-#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Bluetooth UART (BTUART) */
-#define BTUART		BTRBR
-#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
-#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
-#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
-#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
-#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
-#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
-#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
-#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
-#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
-#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
-#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
-#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Standard UART (STUART) */
-#define STUART		STRBR
-#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
-#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
-#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
-#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
-#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
-#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
-#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
-#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
-#define STMSR		__REG(0x40700018)  /* Reserved */
-#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
-#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
-#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Hardware UART (HWUART) */
-#define HWUART		HWRBR
-#define HWRBR		__REG(0x41600000)  /* Receive Buffer Register (read only) */
-#define HWTHR		__REG(0x41600000)  /* Transmit Holding Register (write only) */
-#define HWIER		__REG(0x41600004)  /* Interrupt Enable Register (read/write) */
-#define HWIIR		__REG(0x41600008)  /* Interrupt ID Register (read only) */
-#define HWFCR		__REG(0x41600008)  /* FIFO Control Register (write only) */
-#define HWLCR		__REG(0x4160000C)  /* Line Control Register (read/write) */
-#define HWMCR		__REG(0x41600010)  /* Modem Control Register (read/write) */
-#define HWLSR		__REG(0x41600014)  /* Line Status Register (read only) */
-#define HWMSR		__REG(0x41600018)  /* Modem Status Register (read only) */
-#define HWSPR		__REG(0x4160001C)  /* Scratch Pad Register (read/write) */
-#define HWISR		__REG(0x41600020)  /* Infrared Selection Register (read/write) */
-#define HWFOR		__REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
-#define HWABR		__REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
-#define HWACR		__REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
-#define HWDLL		__REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define HWDLH		__REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
-#define IER_UUE		(1 << 6)	/* UART Unit Enable */
-#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
-#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
-#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
-#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
-#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
-#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
-
-#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
-#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
-#define IIR_TOD		(1 << 3)	/* Time Out Detected */
-#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
-#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
-#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
-
-#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
-#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
-#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
-#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
-#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
-#define FCR_ITL_1	(0)
-#define FCR_ITL_8	(FCR_ITL1)
-#define FCR_ITL_16	(FCR_ITL2)
-#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
-
-#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
-#define LCR_SB		(1 << 6)	/* Set Break */
-#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
-#define LCR_EPS		(1 << 4)	/* Even Parity Select */
-#define LCR_PEN		(1 << 3)	/* Parity Enable */
-#define LCR_STB		(1 << 2)	/* Stop Bit */
-#define LCR_WLS1	(1 << 1)	/* Word Length Select */
-#define LCR_WLS0	(1 << 0)	/* Word Length Select */
-
-#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
-#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
-#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
-#define LSR_BI		(1 << 4)	/* Break Interrupt */
-#define LSR_FE		(1 << 3)	/* Framing Error */
-#define LSR_PE		(1 << 2)	/* Parity Error */
-#define LSR_OE		(1 << 1)	/* Overrun Error */
-#define LSR_DR		(1 << 0)	/* Data Ready */
-
-#define MCR_LOOP	(1 << 4)
-#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
-#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
-#define MCR_RTS		(1 << 1)	/* Request to Send */
-#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
-
-#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
-#define MSR_RI		(1 << 6)	/* Ring Indicator */
-#define MSR_DSR		(1 << 5)	/* Data Set Ready */
-#define MSR_CTS		(1 << 4)	/* Clear To Send */
-#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
-#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
-#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
-#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
-
-/*
- * IrSR (Infrared Selection Register)
- */
-#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
-#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
-#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
-#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
-#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
-
-#endif /* __ASM_ARCH_REGS_UART_H */
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index f0be90573ad3..27293549f8ad 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -10,6 +10,7 @@
 #include "regs-ost.h"
 #include "reset.h"
 #include "smemc.h"
+#include "generic.h"
 
 static void do_hw_reset(void);
 
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
deleted file mode 100644
index 3275b679792b..000000000000
--- a/arch/arm/mach-pxa/saar.c
+++ /dev/null
@@ -1,604 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/saar.c
- *
- *  Support for the Marvell PXA930 Handheld Platform (aka SAAR)
- *
- *  Copyright (C) 2007-2008 Marvell International Ltd.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/smc91x.h>
-#include <linux/mfd/da903x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/onenand.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "pxa930.h"
-#include <linux/platform_data/video-pxafb.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define GPIO_LCD_RESET		(16)
-
-/* SAAR MFP configurations */
-static mfp_cfg_t saar_mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO23_LCD_DD0,
-	GPIO24_LCD_DD1,
-	GPIO25_LCD_DD2,
-	GPIO26_LCD_DD3,
-	GPIO27_LCD_DD4,
-	GPIO28_LCD_DD5,
-	GPIO29_LCD_DD6,
-	GPIO44_LCD_DD7,
-	GPIO21_LCD_CS,
-	GPIO22_LCD_VSYNC,
-	GPIO17_LCD_FCLK_RD,
-	GPIO18_LCD_LCLK_A0,
-	GPIO19_LCD_PCLK_WR,
-	GPIO16_GPIO, /* LCD reset */
-
-	/* Ethernet */
-	DF_nCS1_nCS3,
-	GPIO97_GPIO,
-
-	/* DFI */
-	DF_INT_RnB_ND_INT_RnB,
-	DF_nRE_nOE_ND_nRE,
-	DF_nWE_ND_nWE,
-	DF_CLE_nOE_ND_CLE,
-	DF_nADV1_ALE_ND_ALE,
-	DF_nADV2_ALE_nCS3,
-	DF_nCS0_ND_nCS0,
-	DF_IO0_ND_IO0,
-	DF_IO1_ND_IO1,
-	DF_IO2_ND_IO2,
-	DF_IO3_ND_IO3,
-	DF_IO4_ND_IO4,
-	DF_IO5_ND_IO5,
-	DF_IO6_ND_IO6,
-	DF_IO7_ND_IO7,
-	DF_IO8_ND_IO8,
-	DF_IO9_ND_IO9,
-	DF_IO10_ND_IO10,
-	DF_IO11_ND_IO11,
-	DF_IO12_ND_IO12,
-	DF_IO13_ND_IO13,
-	DF_IO14_ND_IO14,
-	DF_IO15_ND_IO15,
-};
-
-#define SAAR_ETH_PHYS	(0x14000000)
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (SAAR_ETH_PHYS + 0x300),
-		.end	= (SAAR_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)),
-		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata saar_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &saar_smc91x_info,
-	},
-};
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static uint16_t lcd_power_on[] = {
-	/* single frame */
-	SMART_CMD_NOOP,
-	SMART_CMD(0x00),
-	SMART_DELAY(0),
-
-	SMART_CMD_NOOP,
-	SMART_CMD(0x00),
-	SMART_DELAY(0),
-
-	SMART_CMD_NOOP,
-	SMART_CMD(0x00),
-	SMART_DELAY(0),
-
-	SMART_CMD_NOOP,
-	SMART_CMD(0x00),
-	SMART_DELAY(10),
-
-	/* calibration control */
-	SMART_CMD(0x00),
-	SMART_CMD(0xA4),
-	SMART_DAT(0x80),
-	SMART_DAT(0x01),
-	SMART_DELAY(150),
-
-	/*Power-On Init sequence*/
-	SMART_CMD(0x00),	/* output ctrl */
-	SMART_CMD(0x01),
-	SMART_DAT(0x01),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* wave ctrl */
-	SMART_CMD(0x02),
-	SMART_DAT(0x07),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x03),	/* entry mode */
-	SMART_DAT(0xD0),
-	SMART_DAT(0x30),
-	SMART_CMD(0x00),
-	SMART_CMD(0x08),	/* display ctrl 2 */
-	SMART_DAT(0x08),
-	SMART_DAT(0x08),
-	SMART_CMD(0x00),
-	SMART_CMD(0x09),	/* display ctrl 3 */
-	SMART_DAT(0x04),
-	SMART_DAT(0x2F),
-	SMART_CMD(0x00),
-	SMART_CMD(0x0A),	/* display ctrl 4 */
-	SMART_DAT(0x00),
-	SMART_DAT(0x08),
-	SMART_CMD(0x00),
-	SMART_CMD(0x0D),	/* Frame Marker position */
-	SMART_DAT(0x00),
-	SMART_DAT(0x08),
-	SMART_CMD(0x00),
-	SMART_CMD(0x60),	/* Driver output control */
-	SMART_DAT(0x27),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x61),	/* Base image display control */
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x00),
-	SMART_CMD(0x30),	/* Y settings 30h-3Dh */
-	SMART_DAT(0x07),
-	SMART_DAT(0x07),
-	SMART_CMD(0x00),
-	SMART_CMD(0x31),
-	SMART_DAT(0x00),
-	SMART_DAT(0x07),
-	SMART_CMD(0x00),
-	SMART_CMD(0x32),	/* Timing(3), ASW HOLD=0.5CLK */
-	SMART_DAT(0x04),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x33),	/* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
-	SMART_DAT(0x03),
-	SMART_DAT(0x03),
-	SMART_CMD(0x00),
-	SMART_CMD(0x34),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x35),
-	SMART_DAT(0x02),
-	SMART_DAT(0x05),
-	SMART_CMD(0x00),
-	SMART_CMD(0x36),
-	SMART_DAT(0x1F),
-	SMART_DAT(0x1F),
-	SMART_CMD(0x00),
-	SMART_CMD(0x37),
-	SMART_DAT(0x07),
-	SMART_DAT(0x07),
-	SMART_CMD(0x00),
-	SMART_CMD(0x38),
-	SMART_DAT(0x00),
-	SMART_DAT(0x07),
-	SMART_CMD(0x00),
-	SMART_CMD(0x39),
-	SMART_DAT(0x04),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x3A),
-	SMART_DAT(0x03),
-	SMART_DAT(0x03),
-	SMART_CMD(0x00),
-	SMART_CMD(0x3B),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x3C),
-	SMART_DAT(0x02),
-	SMART_DAT(0x05),
-	SMART_CMD(0x00),
-	SMART_CMD(0x3D),
-	SMART_DAT(0x1F),
-	SMART_DAT(0x1F),
-	SMART_CMD(0x00),	/* Display control 1 */
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x00),	/* Power control 5 */
-	SMART_CMD(0x17),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x00),	/* Power control 1 */
-	SMART_CMD(0x10),
-	SMART_DAT(0x10),
-	SMART_DAT(0xB0),
-	SMART_CMD(0x00),	/* Power control 2 */
-	SMART_CMD(0x11),
-	SMART_DAT(0x01),
-	SMART_DAT(0x30),
-	SMART_CMD(0x00),	/* Power control 3 */
-	SMART_CMD(0x12),
-	SMART_DAT(0x01),
-	SMART_DAT(0x9E),
-	SMART_CMD(0x00),	/* Power control 4 */
-	SMART_CMD(0x13),
-	SMART_DAT(0x17),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* Power control 3 */
-	SMART_CMD(0x12),
-	SMART_DAT(0x01),
-	SMART_DAT(0xBE),
-	SMART_DELAY(100),
-
-	/* display mode : 240*320 */
-	SMART_CMD(0x00),	/* RAM address set(H) 0*/
-	SMART_CMD(0x20),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* RAM address set(V)   4*/
-	SMART_CMD(0x21),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* Start of Window RAM address set(H) 8*/
-	SMART_CMD(0x50),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), 	/* End of Window RAM address set(H) 12*/
-	SMART_CMD(0x51),
-	SMART_DAT(0x00),
-	SMART_DAT(0xEF),
-	SMART_CMD(0x00),	/* Start of Window RAM address set(V) 16*/
-	SMART_CMD(0x52),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* End of Window RAM address set(V) 20*/
-	SMART_CMD(0x53),
-	SMART_DAT(0x01),
-	SMART_DAT(0x3F),
-	SMART_CMD(0x00), 	/* Panel interface control 1 */
-	SMART_CMD(0x90),
-	SMART_DAT(0x00),
-	SMART_DAT(0x1A),
-	SMART_CMD(0x00), 	/* Panel interface control 2 */
-	SMART_CMD(0x92),
-	SMART_DAT(0x04),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), 	/* Panel interface control 3 */
-	SMART_CMD(0x93),
-	SMART_DAT(0x00),
-	SMART_DAT(0x05),
-	SMART_DELAY(20),
-};
-
-static uint16_t lcd_panel_on[] = {
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x21),
-	SMART_DELAY(1),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x61),
-	SMART_DELAY(100),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x01),
-	SMART_DAT(0x73),
-	SMART_DELAY(1),
-};
-
-static uint16_t lcd_panel_off[] = {
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x72),
-	SMART_DELAY(40),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_DELAY(1),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_DELAY(1),
-};
-
-static uint16_t lcd_power_off[] = {
-	SMART_CMD(0x00),
-	SMART_CMD(0x10),
-	SMART_DAT(0x00),
-	SMART_DAT(0x80),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x11),
-	SMART_DAT(0x01),
-	SMART_DAT(0x60),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x12),
-	SMART_DAT(0x01),
-	SMART_DAT(0xAE),
-	SMART_DELAY(40),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x10),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-};
-
-static uint16_t update_framedata[] = {
-	/* set display ram: 240*320 */
-	SMART_CMD(0x00), /* RAM address set(H) 0*/
-	SMART_CMD(0x20),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), /* RAM address set(V) 4*/
-	SMART_CMD(0x21),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), /* Start of Window RAM address set(H) 8 */
-	SMART_CMD(0x50),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), /* End of Window RAM address set(H) 12 */
-	SMART_CMD(0x51),
-	SMART_DAT(0x00),
-	SMART_DAT(0xEF),
-	SMART_CMD(0x00), /* Start of Window RAM address set(V) 16 */
-	SMART_CMD(0x52),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), /* End of Window RAM address set(V) 20 */
-	SMART_CMD(0x53),
-	SMART_DAT(0x01),
-	SMART_DAT(0x3F),
-
-	/* wait for vsync cmd before transferring frame data */
-	SMART_CMD_WAIT_FOR_VSYNC,
-
-	/* write ram */
-	SMART_CMD(0x00),
-	SMART_CMD(0x22),
-
-	/* write frame data */
-	SMART_CMD_WRITE_FRAME,
-};
-
-static void ltm022a97a_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	static int pin_requested = 0;
-	struct fb_info *info = container_of(var, struct fb_info, var);
-	int err;
-
-	if (!pin_requested) {
-		err = gpio_request(GPIO_LCD_RESET, "lcd reset");
-		if (err) {
-			pr_err("failed to request gpio for LCD reset\n");
-			return;
-		}
-
-		gpio_direction_output(GPIO_LCD_RESET, 0);
-		pin_requested = 1;
-	}
-
-	if (on) {
-		gpio_set_value(GPIO_LCD_RESET, 0); msleep(100);
-		gpio_set_value(GPIO_LCD_RESET, 1); msleep(10);
-
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_on));
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_on));
-	} else {
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_off));
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_off));
-	}
-
-	err = pxafb_smart_flush(info);
-	if (err)
-		pr_err("%s: timed out\n", __func__);
-}
-
-static void ltm022a97a_update(struct fb_info *info)
-{
-	pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
-	pxafb_smart_flush(info);
-}
-
-static struct pxafb_mode_info toshiba_ltm022a97a_modes[] = {
-	[0] = {
-		.xres			= 240,
-		.yres			= 320,
-		.bpp			= 16,
-		.a0csrd_set_hld		= 30,
-		.a0cswr_set_hld		= 30,
-		.wr_pulse_width		= 30,
-		.rd_pulse_width 	= 30,
-		.op_hold_time 		= 30,
-		.cmd_inh_time		= 60,
-
-		/* L_LCLK_A0 and L_LCLK_RD active low */
-		.sync			= FB_SYNC_HOR_HIGH_ACT |
-					  FB_SYNC_VERT_HIGH_ACT,
-	},
-};
-
-static struct pxafb_mach_info saar_lcd_info = {
-	.modes			= toshiba_ltm022a97a_modes,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= ltm022a97a_lcd_power,
-	.smart_update		= ltm022a97a_update,
-};
-
-static void __init saar_init_lcd(void)
-{
-	pxa_set_fb_info(NULL, &saar_lcd_info);
-}
-#else
-static inline void saar_init_lcd(void) {}
-#endif
-
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct da9034_backlight_pdata saar_da9034_backlight = {
-	.output_current	= 4,	/* 4mA */
-};
-
-static struct da903x_subdev_info saar_da9034_subdevs[] = {
-	[0] = {
-		.name		= "da903x-backlight",
-		.id		= DA9034_ID_WLED,
-		.platform_data	= &saar_da9034_backlight,
-	},
-};
-
-static struct da903x_platform_data saar_da9034_info = {
-	.num_subdevs	= ARRAY_SIZE(saar_da9034_subdevs),
-	.subdevs	= saar_da9034_subdevs,
-};
-
-static struct i2c_board_info saar_i2c_info[] = {
-	[0] = {
-		.type		= "da9034",
-		.addr		= 0x34,
-		.platform_data	= &saar_da9034_info,
-		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
-	},
-};
-
-static void __init saar_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(saar_i2c_info));
-}
-#else
-static inline void saar_init_i2c(void) {}
-#endif
-
-#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
-static struct mtd_partition saar_onenand_partitions[] = {
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_1M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_8M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= (SZ_2M + SZ_1M),
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_32M + SZ_16M,
-		.mask_flags	= 0,
-	}
-};
-
-static struct onenand_platform_data saar_onenand_info = {
-	.parts		= saar_onenand_partitions,
-	.nr_parts	= ARRAY_SIZE(saar_onenand_partitions),
-};
-
-#define SMC_CS0_PHYS_BASE	(0x10000000)
-
-static struct resource saar_resource_onenand[] = {
-	[0] = {
-		.start	= SMC_CS0_PHYS_BASE,
-		.end	= SMC_CS0_PHYS_BASE + SZ_1M,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device saar_device_onenand = {
-	.name		= "onenand-flash",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &saar_onenand_info,
-	},
-	.resource	= saar_resource_onenand,
-	.num_resources	= ARRAY_SIZE(saar_resource_onenand),
-};
-
-static void __init saar_init_onenand(void)
-{
-	platform_device_register(&saar_device_onenand);
-}
-#else
-static void __init saar_init_onenand(void) {}
-#endif
-
-static void __init saar_init(void)
-{
-	/* initialize MFP configurations */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_device_register(&smc91x_device);
-	saar_init_onenand();
-
-	saar_init_i2c();
-	saar_init_lcd();
-}
-
-MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
-	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
-	.atag_offset    = 0x100,
-	.map_io         = pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa3xx_init_irq,
-	.handle_irq       = pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = saar_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index a829baf8d922..71b282b146d0 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -31,10 +31,10 @@
 /*
  * Constants
  */
-#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
-#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
-#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
-#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
+#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (secs_to_jiffies(60))
+#define SHARPSL_CHARGE_FINISH_TIME             (secs_to_jiffies(10*60))
+#define SHARPSL_BATCHK_TIME                    (secs_to_jiffies(15))
+#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10) /* 10 min */
 
 #define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
 #define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
@@ -170,10 +170,6 @@ extern int max1111_read_channel(int);
  */
 int sharpsl_pm_pxa_read_max1111(int channel)
 {
-	/* Ugly, better move this function into another module */
-	if (machine_is_tosa())
-	    return 0;
-
 	/* max1111 accepts channels from 0-3, however,
 	 * it is encoded from 0-7 here in the code.
 	 */
@@ -220,8 +216,6 @@ void sharpsl_battery_kick(void)
 {
 	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
 }
-EXPORT_SYMBOL(sharpsl_battery_kick);
-
 
 static void sharpsl_battery_thread(struct work_struct *private_)
 {
@@ -894,7 +888,7 @@ static int sharpsl_pm_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int sharpsl_pm_remove(struct platform_device *pdev)
+static void sharpsl_pm_remove(struct platform_device *pdev)
 {
 	suspend_set_ops(NULL);
 
@@ -919,10 +913,8 @@ static int sharpsl_pm_remove(struct platform_device *pdev)
 	if (sharpsl_pm.machinfo->exit)
 		sharpsl_pm.machinfo->exit();
 
-	del_timer_sync(&sharpsl_pm.chrg_full_timer);
-	del_timer_sync(&sharpsl_pm.ac_timer);
-
-	return 0;
+	timer_delete_sync(&sharpsl_pm.chrg_full_timer);
+	timer_delete_sync(&sharpsl_pm.ac_timer);
 }
 
 static struct platform_driver sharpsl_pm_driver = {
diff --git a/arch/arm/mach-pxa/sharpsl_pm.h b/arch/arm/mach-pxa/sharpsl_pm.h
index 20e4cab64d85..623167f30ec2 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.h
+++ b/arch/arm/mach-pxa/sharpsl_pm.h
@@ -105,5 +105,4 @@ void sharpsl_pm_led(int val);
 #define MAX1111_ACIN_VOLT   6u
 int sharpsl_pm_pxa_read_max1111(int channel);
 
-void corgi_lcd_limit_intensity(int limit);
 #endif
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 9964729cd428..c0b1f7e6be87 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -9,25 +9,27 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>	/* symbol_get ; symbol_put */
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
 #include <linux/gpio/machine.h>
+#include <linux/gpio/property.h>
 #include <linux/leds.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-pxa.h>
 #include <linux/platform_data/pca953x.h>
+#include <linux/property.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
-#include <linux/spi/pxa2xx_spi.h>
 #include <linux/mtd/sharpsl.h>
 #include <linux/mtd/physmap.h>
+#include <linux/input-event-codes.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/regulator/machine.h>
 #include <linux/io.h>
+#include <linux/property.h>
 #include <linux/reboot.h>
 #include <linux/memblock.h>
 
@@ -40,7 +42,6 @@
 #include "pxa27x.h"
 #include "pxa27x-udc.h"
 #include "reset.h"
-#include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/video-pxafb.h>
@@ -129,6 +130,19 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO1_GPIO | WAKEUP_ON_EDGE_FALL,	/* SPITZ_GPIO_RESET */
 };
 
+static const struct software_node spitz_scoop_1_gpiochip_node = {
+	.name = "sharp-scoop.0",
+};
+
+/* Only on Spitz */
+static const struct software_node spitz_scoop_2_gpiochip_node = {
+	.name = "sharp-scoop.1",
+};
+
+/* Only on Akita */
+static const struct software_node akita_max7310_gpiochip_node = {
+	.name = "i2c-max7310",
+};
 
 /******************************************************************************
  * Scoop GPIO expander
@@ -364,38 +378,56 @@ static const uint32_t spitz_keymap[] = {
 	KEY(6, 8, KEY_RIGHT),
 };
 
-static const struct matrix_keymap_data spitz_keymap_data = {
-	.keymap		= spitz_keymap,
-	.keymap_size	= ARRAY_SIZE(spitz_keymap),
+static const struct software_node_ref_args spitz_mkp_row_gpios[] = {
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 12, GPIO_ACTIVE_HIGH),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 17, GPIO_ACTIVE_HIGH),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 91, GPIO_ACTIVE_HIGH),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 34, GPIO_ACTIVE_HIGH),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 36, GPIO_ACTIVE_HIGH),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 38, GPIO_ACTIVE_HIGH),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 39, GPIO_ACTIVE_HIGH),
+};
+
+static const struct software_node_ref_args spitz_mkp_col_gpios[] = {
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 88, GPIO_ACTIVE_HIGH),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 23, GPIO_ACTIVE_HIGH),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 24, GPIO_ACTIVE_HIGH),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 25, GPIO_ACTIVE_HIGH),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 26, GPIO_ACTIVE_HIGH),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 27, GPIO_ACTIVE_HIGH),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 52, GPIO_ACTIVE_HIGH),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 103, GPIO_ACTIVE_HIGH),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 107, GPIO_ACTIVE_HIGH),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 108, GPIO_ACTIVE_HIGH),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 114, GPIO_ACTIVE_HIGH),
 };
 
-static const uint32_t spitz_row_gpios[] =
-		{ 12, 17, 91, 34, 36, 38, 39 };
-static const uint32_t spitz_col_gpios[] =
-		{ 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 };
-
-static struct matrix_keypad_platform_data spitz_mkp_pdata = {
-	.keymap_data		= &spitz_keymap_data,
-	.row_gpios		= spitz_row_gpios,
-	.col_gpios		= spitz_col_gpios,
-	.num_row_gpios		= ARRAY_SIZE(spitz_row_gpios),
-	.num_col_gpios		= ARRAY_SIZE(spitz_col_gpios),
-	.col_scan_delay_us	= 10,
-	.debounce_ms		= 10,
-	.wakeup			= 1,
+static const struct property_entry spitz_mkp_properties[] = {
+	PROPERTY_ENTRY_U32_ARRAY("linux,keymap", spitz_keymap),
+	PROPERTY_ENTRY_REF_ARRAY("row-gpios", spitz_mkp_row_gpios),
+	PROPERTY_ENTRY_REF_ARRAY("col-gpios", spitz_mkp_col_gpios),
+	PROPERTY_ENTRY_U32("col-scan-delay-us", 10),
+	PROPERTY_ENTRY_U32("debounce-delay-ms", 10),
+	PROPERTY_ENTRY_BOOL("wakeup-source"),
+	{ }
 };
 
-static struct platform_device spitz_mkp_device = {
+static const struct platform_device_info spitz_mkp_info __initconst = {
 	.name		= "matrix-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &spitz_mkp_pdata,
-	},
+	.id		= PLATFORM_DEVID_NONE,
+	.properties	= spitz_mkp_properties,
 };
 
+
 static void __init spitz_mkp_init(void)
 {
-	platform_device_register(&spitz_mkp_device);
+	struct platform_device *pd;
+	int err;
+
+	pd = platform_device_register_full(&spitz_mkp_info);
+	err = PTR_ERR_OR_ZERO(pd);
+	if (err)
+		pr_err("failed to create keypad device: %d\n", err);
 }
 #else
 static inline void spitz_mkp_init(void) {}
@@ -405,45 +437,82 @@ static inline void spitz_mkp_init(void) {}
  * GPIO keys
  ******************************************************************************/
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button spitz_gpio_keys[] = {
-	{
-		.type	= EV_PWR,
-		.code	= KEY_SUSPEND,
-		.gpio	= SPITZ_GPIO_ON_KEY,
-		.desc	= "On Off",
-		.wakeup	= 1,
-	},
-	/* Two buttons detecting the lid state */
-	{
-		.type	= EV_SW,
-		.code	= 0,
-		.gpio	= SPITZ_GPIO_SWA,
-		.desc	= "Display Down",
-	},
-	{
-		.type	= EV_SW,
-		.code	= 1,
-		.gpio	= SPITZ_GPIO_SWB,
-		.desc	= "Lid Closed",
-	},
+static const struct software_node spitz_gpio_keys_node = {
+	.name = "spitz-gpio-keys",
 };
 
-static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = {
-	.buttons	= spitz_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(spitz_gpio_keys),
+static const struct property_entry spitz_suspend_key_props[] = {
+	PROPERTY_ENTRY_U32("linux,input-type", EV_PWR),
+	PROPERTY_ENTRY_U32("linux,code", KEY_SUSPEND),
+	PROPERTY_ENTRY_GPIO("gpios", &pxa2xx_gpiochip_node,
+			    SPITZ_GPIO_ON_KEY, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_STRING("label", "On Off"),
+	PROPERTY_ENTRY_BOOL("wakeup-source"),
+	{ }
 };
 
-static struct platform_device spitz_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &spitz_gpio_keys_platform_data,
-	},
+static const struct software_node spitz_suspend_key_node = {
+	.parent = &spitz_gpio_keys_node,
+	.properties = spitz_suspend_key_props,
+};
+
+static const struct property_entry spitz_sw1_props[] = {
+	PROPERTY_ENTRY_U32("linux,input-type", EV_SW),
+	PROPERTY_ENTRY_U32("linux,code", 0),
+	PROPERTY_ENTRY_GPIO("gpios", &pxa2xx_gpiochip_node,
+			    SPITZ_GPIO_SWA, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_STRING("label", "Display Down"),
+	{ }
+};
+
+static const struct software_node spitz_sw1_node = {
+	.parent = &spitz_gpio_keys_node,
+	.properties = spitz_sw1_props,
+};
+
+static const struct property_entry spitz_sw2_props[] = {
+	PROPERTY_ENTRY_U32("linux,input-type", EV_SW),
+	PROPERTY_ENTRY_U32("linux,code", 1),
+	PROPERTY_ENTRY_GPIO("gpios", &pxa2xx_gpiochip_node,
+			    SPITZ_GPIO_SWB, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_STRING("label", "Lid Closed"),
+	{ }
+};
+
+static const struct software_node spitz_sw2_node = {
+	.parent = &spitz_gpio_keys_node,
+	.properties = spitz_sw2_props,
+};
+
+static const struct software_node *spitz_gpio_keys_swnodes[] = {
+	&spitz_gpio_keys_node,
+	&spitz_suspend_key_node,
+	&spitz_sw1_node,
+	&spitz_sw2_node,
+	NULL
 };
 
 static void __init spitz_keys_init(void)
 {
-	platform_device_register(&spitz_gpio_keys_device);
+	struct platform_device_info keys_info = {
+		.name	= "gpio-keys",
+		.id	= PLATFORM_DEVID_NONE,
+	};
+	struct platform_device *pd;
+	int err;
+
+	err = software_node_register_node_group(spitz_gpio_keys_swnodes);
+	if (err) {
+		pr_err("failed to register gpio-keys software nodes: %d\n", err);
+		return;
+	}
+
+	keys_info.fwnode = software_node_fwnode(&spitz_gpio_keys_node);
+
+	pd = platform_device_register_full(&keys_info);
+	err = PTR_ERR_OR_ZERO(pd);
+	if (err)
+		pr_err("failed to create gpio-keys device: %d\n", err);
 }
 #else
 static inline void spitz_keys_init(void) {}
@@ -453,35 +522,64 @@ static inline void spitz_keys_init(void) {}
  * LEDs
  ******************************************************************************/
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led spitz_gpio_leds[] = {
-	{
-		.name			= "spitz:amber:charge",
-		.default_trigger	= "sharpsl-charge",
-		.gpio			= SPITZ_GPIO_LED_ORANGE,
-	},
-	{
-		.name			= "spitz:green:hddactivity",
-		.default_trigger	= "disk-activity",
-		.gpio			= SPITZ_GPIO_LED_GREEN,
-	},
+static const struct software_node spitz_gpio_leds_node = {
+	.name = "spitz-leds",
 };
 
-static struct gpio_led_platform_data spitz_gpio_leds_info = {
-	.leds		= spitz_gpio_leds,
-	.num_leds	= ARRAY_SIZE(spitz_gpio_leds),
+static const struct property_entry spitz_orange_led_props[] = {
+	PROPERTY_ENTRY_STRING("linux,default-trigger", "sharpsl-charge"),
+	PROPERTY_ENTRY_GPIO("gpios",
+			    &spitz_scoop_1_gpiochip_node, 6, GPIO_ACTIVE_HIGH),
+	{ }
 };
 
-static struct platform_device spitz_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &spitz_gpio_leds_info,
-	},
+static const struct software_node spitz_orange_led_node = {
+	.name = "spitz:amber:charge",
+	.parent = &spitz_gpio_leds_node,
+	.properties = spitz_orange_led_props,
+};
+
+static const struct property_entry spitz_green_led_props[] = {
+	PROPERTY_ENTRY_STRING("linux,default-trigger", "disk-activity"),
+	PROPERTY_ENTRY_GPIO("gpios",
+			    &spitz_scoop_1_gpiochip_node, 0, GPIO_ACTIVE_HIGH),
+	{ }
+};
+
+static const struct software_node spitz_green_led_node = {
+	.name = "spitz:green:hddactivity",
+	.parent = &spitz_gpio_leds_node,
+	.properties = spitz_green_led_props,
+};
+
+static const struct software_node *spitz_gpio_leds_swnodes[] = {
+	&spitz_gpio_leds_node,
+	&spitz_orange_led_node,
+	&spitz_green_led_node,
+	NULL
 };
 
 static void __init spitz_leds_init(void)
 {
-	platform_device_register(&spitz_led_device);
+	struct platform_device_info led_info = {
+		.name	= "leds-gpio",
+		.id	= PLATFORM_DEVID_NONE,
+	};
+	struct platform_device *led_dev;
+	int err;
+
+	err = software_node_register_node_group(spitz_gpio_leds_swnodes);
+	if (err) {
+		pr_err("failed to register LED software nodes: %d\n", err);
+		return;
+	}
+
+	led_info.fwnode = software_node_fwnode(&spitz_gpio_leds_node);
+
+	led_dev = platform_device_register_full(&led_info);
+	err = PTR_ERR_OR_ZERO(led_dev);
+	if (err)
+		pr_err("failed to create LED device: %d\n", err);
 }
 #else
 static inline void spitz_leds_init(void) {}
@@ -491,56 +589,43 @@ static inline void spitz_leds_init(void) {}
  * SSP Devices
  ******************************************************************************/
 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static void spitz_ads7846_wait_for_hsync(void)
-{
-	while (gpio_get_value(SPITZ_GPIO_HSYNC))
-		cpu_relax();
 
-	while (!gpio_get_value(SPITZ_GPIO_HSYNC))
-		cpu_relax();
-}
-
-static struct ads7846_platform_data spitz_ads7846_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.pressure_max		= 1024,
-	.gpio_pendown		= SPITZ_GPIO_TP_INT,
-	.wait_for_sync		= spitz_ads7846_wait_for_hsync,
+static const struct property_entry spitz_ads7846_props[] = {
+	PROPERTY_ENTRY_STRING("compatible", "ti,ads7846"),
+	PROPERTY_ENTRY_U32("touchscreen-max-pressure", 1024),
+	PROPERTY_ENTRY_U16("ti,x-plate-ohms", 419),
+	PROPERTY_ENTRY_U16("ti,y-plate-ohms", 486),
+	PROPERTY_ENTRY_U16("ti,vref-delay-usecs", 100),
+	PROPERTY_ENTRY_GPIO("pendown-gpios", &pxa2xx_gpiochip_node,
+			    SPITZ_GPIO_TP_INT, GPIO_ACTIVE_LOW),
+	PROPERTY_ENTRY_GPIO("ti,hsync-gpios", &pxa2xx_gpiochip_node,
+			    SPITZ_GPIO_HSYNC, GPIO_ACTIVE_LOW),
+	{ }
 };
 
-static void spitz_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
+static const struct software_node spitz_ads7846_swnode = {
+	.name = "ads7846",
+	.properties = spitz_ads7846_props,
+};
 
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
+static const struct property_entry spitz_lcdcon_props[] = {
+	PROPERTY_ENTRY_GPIO("BL_CONT-gpios",
+			    &spitz_scoop_2_gpiochip_node, 6, GPIO_ACTIVE_LOW),
+	PROPERTY_ENTRY_GPIO("BL_ON-gpios",
+			    &spitz_scoop_2_gpiochip_node, 7, GPIO_ACTIVE_HIGH),
+	{ }
+};
 
-static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
-	.dev_id = "spi2.1",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_CONT,
-			    "BL_CONT", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_ON,
-			    "BL_ON", GPIO_ACTIVE_HIGH),
-		{ },
-	},
+static const struct property_entry akita_lcdcon_props[] = {
+	PROPERTY_ENTRY_GPIO("BL_ON-gpios",
+			    &akita_max7310_gpiochip_node, 3, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("BL_CONT-gpios",
+			    &akita_max7310_gpiochip_node, 4, GPIO_ACTIVE_LOW),
+	{ }
 };
 
-static struct gpiod_lookup_table akita_lcdcon_gpio_table = {
-	.dev_id = "spi2.1",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_CONT,
-			    "BL_CONT", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_ON,
-			    "BL_ON", GPIO_ACTIVE_HIGH),
-		{ },
-	},
+static struct software_node spitz_lcdcon_node = {
+	.name = "spitz-lcdcon",
 };
 
 static struct corgi_lcd_platform_data spitz_lcdcon_info = {
@@ -548,7 +633,7 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = {
 	.max_intensity		= 0x2f,
 	.default_intensity	= 0x1f,
 	.limit_mask		= 0x0b,
-	.kick_battery		= spitz_bl_kick_battery,
+	.kick_battery		= sharpsl_battery_kick,
 };
 
 static struct spi_board_info spitz_spi_devices[] = {
@@ -557,7 +642,7 @@ static struct spi_board_info spitz_spi_devices[] = {
 		.max_speed_hz		= 1200000,
 		.bus_num		= 2,
 		.chip_select		= 0,
-		.platform_data		= &spitz_ads7846_info,
+		.swnode			= &spitz_ads7846_swnode,
 		.irq			= PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT),
 	}, {
 		.modalias		= "corgi-lcd",
@@ -565,6 +650,7 @@ static struct spi_board_info spitz_spi_devices[] = {
 		.bus_num		= 2,
 		.chip_select		= 1,
 		.platform_data		= &spitz_lcdcon_info,
+		.swnode			= &spitz_lcdcon_node,
 	}, {
 		.modalias		= "max1111",
 		.max_speed_hz		= 450000,
@@ -573,29 +659,40 @@ static struct spi_board_info spitz_spi_devices[] = {
 	},
 };
 
-static struct pxa2xx_spi_controller spitz_spi_info = {
-	.num_chipselect	= 3,
+static const struct software_node_ref_args spitz_spi_gpio_refs[] = {
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, SPITZ_GPIO_ADS7846_CS,
+				GPIO_ACTIVE_LOW),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, SPITZ_GPIO_LCDCON_CS,
+				GPIO_ACTIVE_LOW),
+	SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, SPITZ_GPIO_MAX1111_CS,
+				GPIO_ACTIVE_LOW),
 };
 
-static struct gpiod_lookup_table spitz_spi_gpio_table = {
-	.dev_id = "spi2",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_MAX1111_CS, "cs", 2, GPIO_ACTIVE_LOW),
-		{ },
-	},
+static const struct property_entry spitz_spi_properties[] = {
+	PROPERTY_ENTRY_REF_ARRAY("gpios", spitz_spi_gpio_refs),
+	{ }
+};
+
+static const struct platform_device_info spitz_spi_device_info = {
+	.name = "pxa2xx-spi",
+	/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1 */
+	.id = 2,
+	.properties = spitz_spi_properties,
 };
 
 static void __init spitz_spi_init(void)
 {
-	if (machine_is_akita())
-		gpiod_add_lookup_table(&akita_lcdcon_gpio_table);
-	else
-		gpiod_add_lookup_table(&spitz_lcdcon_gpio_table);
+	struct platform_device *pd;
+	int err;
 
-	gpiod_add_lookup_table(&spitz_spi_gpio_table);
-	pxa2xx_set_spi_info(2, &spitz_spi_info);
+	pd = platform_device_register_full(&spitz_spi_device_info);
+	err = PTR_ERR_OR_ZERO(pd);
+	if (err)
+		pr_err("pxa2xx-spi: failed to instantiate SPI controller: %d\n",
+		       err);
+
+	spitz_lcdcon_node.properties = machine_is_akita() ?
+					akita_lcdcon_props : spitz_lcdcon_props;
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
 }
 #else
@@ -628,21 +725,17 @@ static struct pxamci_platform_data spitz_mci_platform_data = {
 	.setpower		= spitz_mci_setpower,
 };
 
-static struct gpiod_lookup_table spitz_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_nSD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_nSD_WP,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
+static const struct property_entry spitz_mci_props[] __initconst = {
+	PROPERTY_ENTRY_GPIO("cd-gpios", &pxa2xx_gpiochip_node,
+			    SPITZ_GPIO_nSD_DETECT, GPIO_ACTIVE_LOW),
+	PROPERTY_ENTRY_GPIO("wp-gpios", &pxa2xx_gpiochip_node,
+			    SPITZ_GPIO_nSD_WP, GPIO_ACTIVE_LOW),
+	{ }
 };
 
 static void __init spitz_mmc_init(void)
 {
-	gpiod_add_lookup_table(&spitz_mci_gpio_table);
-	pxa_set_mci_info(&spitz_mci_platform_data);
+	pxa_set_mci_info(&spitz_mci_platform_data, spitz_mci_props);
 }
 #else
 static inline void spitz_mmc_init(void) {}
@@ -688,27 +781,6 @@ static inline void spitz_uhc_init(void) {}
 #endif
 
 /******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_PXA_FICP) || defined(CONFIG_PXA_FICP_MODULE)
-static struct pxaficp_platform_data spitz_ficp_platform_data = {
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-static void __init spitz_irda_init(void)
-{
-	if (machine_is_akita())
-		spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
-	else
-		spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
-
-	pxa_set_ficp_info(&spitz_ficp_platform_data);
-}
-#else
-static inline void spitz_irda_init(void) {}
-#endif
-
-/******************************************************************************
  * Framebuffer
  ******************************************************************************/
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
@@ -962,30 +1034,24 @@ static void __init spitz_i2c_init(void)
 static inline void spitz_i2c_init(void) {}
 #endif
 
-static struct gpiod_lookup_table spitz_audio_gpio_table = {
-	.dev_id = "spitz-audio",
-	.table = {
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
-			    "mute-l", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
-			    "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.1", SPITZ_GPIO_MIC_BIAS - SPITZ_SCP2_GPIO_BASE,
-			    "mic", GPIO_ACTIVE_HIGH),
-		{ },
-	},
+static const struct property_entry spitz_audio_props[] = {
+	PROPERTY_ENTRY_GPIO("mute-l-gpios", &spitz_scoop_1_gpiochip_node, 3,
+			    GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("mute-r-gpios", &spitz_scoop_1_gpiochip_node, 4,
+			    GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("mic-gpios", &spitz_scoop_2_gpiochip_node, 8,
+			    GPIO_ACTIVE_HIGH),
+	{ }
 };
 
-static struct gpiod_lookup_table akita_audio_gpio_table = {
-	.dev_id = "spitz-audio",
-	.table = {
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
-			    "mute-l", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
-			    "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("i2c-max7310", AKITA_GPIO_MIC_BIAS - AKITA_IOEXP_GPIO_BASE,
-			    "mic", GPIO_ACTIVE_HIGH),
-		{ },
-	},
+static const struct property_entry akita_audio_props[] = {
+	PROPERTY_ENTRY_GPIO("mute-l-gpios", &spitz_scoop_1_gpiochip_node, 3,
+			    GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("mute-r-gpios", &spitz_scoop_1_gpiochip_node, 4,
+			    GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("mic-gpios", &akita_max7310_gpiochip_node, 2,
+			    GPIO_ACTIVE_HIGH),
+	{ }
 };
 
 /******************************************************************************
@@ -993,12 +1059,14 @@ static struct gpiod_lookup_table akita_audio_gpio_table = {
  ******************************************************************************/
 static inline void spitz_audio_init(void)
 {
-	if (machine_is_akita())
-		gpiod_add_lookup_table(&akita_audio_gpio_table);
-	else
-		gpiod_add_lookup_table(&spitz_audio_gpio_table);
-
-	platform_device_register_simple("spitz-audio", -1, NULL, 0);
+	struct platform_device_info audio_info = {
+		.name = "spitz-audio",
+		.id = PLATFORM_DEVID_NONE,
+		.properties = machine_is_akita() ?
+				akita_audio_props : spitz_audio_props,
+	};
+
+	platform_device_register_full(&audio_info);
 }
 
 /******************************************************************************
@@ -1021,8 +1089,14 @@ static void spitz_restart(enum reboot_mode mode, const char *cmd)
 
 static void __init spitz_init(void)
 {
+	software_node_register(&spitz_scoop_1_gpiochip_node);
+	if (machine_is_akita())
+		software_node_register(&akita_max7310_gpiochip_node);
+	else
+		software_node_register(&spitz_scoop_2_gpiochip_node);
+
 	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
-	pm_power_off = spitz_poweroff;
+	register_platform_power_off(spitz_poweroff);
 
 	PMCR = 0x00;
 
@@ -1042,7 +1116,6 @@ static void __init spitz_init(void)
 	spitz_leds_init();
 	spitz_mmc_init();
 	spitz_pcmcia_init();
-	spitz_irda_init();
 	spitz_uhc_init();
 	spitz_lcd_init();
 	spitz_nor_init();
@@ -1065,7 +1138,6 @@ MACHINE_START(SPITZ, "SHARP Spitz")
 	.map_io		= pxa27x_map_io,
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
 	.init_machine	= spitz_init,
 	.init_time	= pxa_timer_init,
 	.restart	= spitz_restart,
@@ -1078,7 +1150,6 @@ MACHINE_START(BORZOI, "SHARP Borzoi")
 	.map_io		= pxa27x_map_io,
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
 	.init_machine	= spitz_init,
 	.init_time	= pxa_timer_init,
 	.restart	= spitz_restart,
@@ -1091,7 +1162,6 @@ MACHINE_START(AKITA, "SHARP Akita")
 	.map_io		= pxa27x_map_io,
 	.nr_irqs	= PXA_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
 	.init_machine	= spitz_init,
 	.init_time	= pxa_timer_init,
 	.restart	= spitz_restart,
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 6689b67f9ce5..03b4b347f11a 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -15,6 +15,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
+#include <linux/spi/corgi_lcd.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
@@ -34,18 +35,20 @@
 
 static int spitz_last_ac_status;
 
-static struct gpio spitz_charger_gpios[] = {
-	{ SPITZ_GPIO_KEY_INT,	GPIOF_IN, "Keyboard Interrupt" },
-	{ SPITZ_GPIO_SYNC,	GPIOF_IN, "Sync" },
-	{ SPITZ_GPIO_AC_IN,     GPIOF_IN, "Charger Detection" },
-	{ SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
-	{ SPITZ_GPIO_JK_B,	  GPIOF_OUT_INIT_LOW, "JK B" },
-	{ SPITZ_GPIO_CHRG_ON,	  GPIOF_OUT_INIT_LOW, "Charger On" },
-};
-
 static void spitz_charger_init(void)
 {
-	gpio_request_array(ARRAY_AND_SIZE(spitz_charger_gpios));
+	gpio_request(SPITZ_GPIO_KEY_INT, "Keyboard Interrupt");
+	gpio_direction_input(SPITZ_GPIO_KEY_INT);
+	gpio_request(SPITZ_GPIO_SYNC, "Sync");
+	gpio_direction_input(SPITZ_GPIO_SYNC);
+	gpio_request(SPITZ_GPIO_AC_IN, "Charger Detection");
+	gpio_direction_input(SPITZ_GPIO_AC_IN);
+	gpio_request(SPITZ_GPIO_ADC_TEMP_ON, "ADC Temp On");
+	gpio_direction_output(SPITZ_GPIO_ADC_TEMP_ON, 0);
+	gpio_request(SPITZ_GPIO_JK_B, "JK B");
+	gpio_direction_output(SPITZ_GPIO_JK_B, 0);
+	gpio_request(SPITZ_GPIO_CHRG_ON, "Charger On");
+	gpio_direction_output(SPITZ_GPIO_CHRG_ON, 0);
 }
 
 static void spitz_measure_temp(int on)
@@ -166,7 +169,7 @@ static bool spitz_charger_wakeup(void)
 		gpio_get_value(SPITZ_GPIO_SYNC);
 }
 
-unsigned long spitzpm_read_devdata(int type)
+static unsigned long spitzpm_read_devdata(int type)
 {
 	switch (type) {
 	case SHARPSL_STATUS_ACIN:
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
deleted file mode 100644
index a15eb3b9484d..000000000000
--- a/arch/arm/mach-pxa/tavorevb.c
+++ /dev/null
@@ -1,506 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/tavorevb.c
- *
- *  Support for the Marvell PXA930 Evaluation Board
- *
- *  Copyright (C) 2007-2008 Marvell International Ltd.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/smc91x.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa930.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-
-#include "devices.h"
-#include "generic.h"
-
-/* Tavor EVB MFP configurations */
-static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
-	/* Ethernet */
-	DF_nCS1_nCS3,
-	GPIO47_GPIO,
-
-	/* LCD */
-	GPIO23_LCD_DD0,
-	GPIO24_LCD_DD1,
-	GPIO25_LCD_DD2,
-	GPIO26_LCD_DD3,
-	GPIO27_LCD_DD4,
-	GPIO28_LCD_DD5,
-	GPIO29_LCD_DD6,
-	GPIO44_LCD_DD7,
-	GPIO21_LCD_CS,
-	GPIO22_LCD_CS2,
-
-	GPIO17_LCD_FCLK_RD,
-	GPIO18_LCD_LCLK_A0,
-	GPIO19_LCD_PCLK_WR,
-
-	/* LCD Backlight */
-	GPIO43_PWM3,	/* primary backlight */
-	GPIO32_PWM0,	/* secondary backlight */
-
-	/* Keypad */
-	GPIO0_KP_MKIN_0,
-	GPIO2_KP_MKIN_1,
-	GPIO4_KP_MKIN_2,
-	GPIO6_KP_MKIN_3,
-	GPIO8_KP_MKIN_4,
-	GPIO10_KP_MKIN_5,
-	GPIO12_KP_MKIN_6,
-	GPIO1_KP_MKOUT_0,
-	GPIO3_KP_MKOUT_1,
-	GPIO5_KP_MKOUT_2,
-	GPIO7_KP_MKOUT_3,
-	GPIO9_KP_MKOUT_4,
-	GPIO11_KP_MKOUT_5,
-	GPIO13_KP_MKOUT_6,
-
-	GPIO14_KP_DKIN_2,
-	GPIO15_KP_DKIN_3,
-};
-
-#define TAVOREVB_ETH_PHYS	(0x14000000)
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (TAVOREVB_ETH_PHYS + 0x300),
-		.end	= (TAVOREVB_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)),
-		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata tavorevb_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &tavorevb_smc91x_info,
-	},
-};
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int tavorevb_matrix_key_map[] = {
-	/* KEY(row, col, key_code) */
-	KEY(0, 4, KEY_A), KEY(0, 5, KEY_B), KEY(0, 6, KEY_C),
-	KEY(1, 4, KEY_E), KEY(1, 5, KEY_F), KEY(1, 6, KEY_G),
-	KEY(2, 4, KEY_I), KEY(2, 5, KEY_J), KEY(2, 6, KEY_K),
-	KEY(3, 4, KEY_M), KEY(3, 5, KEY_N), KEY(3, 6, KEY_O),
-	KEY(4, 5, KEY_R), KEY(4, 6, KEY_S),
-	KEY(5, 4, KEY_U), KEY(5, 4, KEY_V), KEY(5, 6, KEY_W),
-
-	KEY(6, 4, KEY_Y), KEY(6, 5, KEY_Z),
-
-	KEY(0, 3, KEY_0), KEY(2, 0, KEY_1), KEY(2, 1, KEY_2), KEY(2, 2, KEY_3),
-	KEY(2, 3, KEY_4), KEY(1, 0, KEY_5), KEY(1, 1, KEY_6), KEY(1, 2, KEY_7),
-	KEY(1, 3, KEY_8), KEY(0, 2, KEY_9),
-
-	KEY(6, 6, KEY_SPACE),
-	KEY(0, 0, KEY_KPASTERISK), 	/* * */
-	KEY(0, 1, KEY_KPDOT), 		/* # */
-
-	KEY(4, 1, KEY_UP),
-	KEY(4, 3, KEY_DOWN),
-	KEY(4, 0, KEY_LEFT),
-	KEY(4, 2, KEY_RIGHT),
-	KEY(6, 0, KEY_HOME),
-	KEY(3, 2, KEY_END),
-	KEY(6, 1, KEY_DELETE),
-	KEY(5, 2, KEY_BACK),
-	KEY(6, 3, KEY_CAPSLOCK),	/* KEY_LEFTSHIFT), */
-
-	KEY(4, 4, KEY_ENTER),		/* scroll push */
-	KEY(6, 2, KEY_ENTER),		/* keypad action */
-
-	KEY(3, 1, KEY_SEND),
-	KEY(5, 3, KEY_RECORD),
-	KEY(5, 0, KEY_VOLUMEUP),
-	KEY(5, 1, KEY_VOLUMEDOWN),
-
-	KEY(3, 0, KEY_F22),	/* soft1 */
-	KEY(3, 3, KEY_F23),	/* soft2 */
-};
-
-static struct matrix_keymap_data tavorevb_matrix_keymap_data = {
-	.keymap		= tavorevb_matrix_key_map,
-	.keymap_size	= ARRAY_SIZE(tavorevb_matrix_key_map),
-};
-
-static struct pxa27x_keypad_platform_data tavorevb_keypad_info = {
-	.matrix_key_rows	= 7,
-	.matrix_key_cols	= 7,
-	.matrix_keymap_data	= &tavorevb_matrix_keymap_data,
-	.debounce_interval	= 30,
-};
-
-static void __init tavorevb_init_keypad(void)
-{
-	pxa_set_keypad_info(&tavorevb_keypad_info);
-}
-#else
-static inline void tavorevb_init_keypad(void) {}
-#endif /* CONFIG_KEYBOARD_PXA27x || CONFIG_KEYBOARD_PXA27x_MODULE */
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pwm_lookup tavorevb_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 100000,
-		   PWM_POLARITY_NORMAL),
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.1", NULL, 100000,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data tavorevb_backlight_data[] = {
-	[0] = {
-		/* primary backlight */
-		.max_brightness	= 100,
-		.dft_brightness	= 100,
-	},
-	[1] = {
-		/* secondary backlight */
-		.max_brightness	= 100,
-		.dft_brightness	= 100,
-	},
-};
-
-static struct platform_device tavorevb_backlight_devices[] = {
-	[0] = {
-		.name		= "pwm-backlight",
-		.id		= 0,
-		.dev		= {
-			.platform_data = &tavorevb_backlight_data[0],
-		},
-	},
-	[1] = {
-		.name		= "pwm-backlight",
-		.id		= 1,
-		.dev		= {
-			.platform_data = &tavorevb_backlight_data[1],
-		},
-	},
-};
-
-static uint16_t panel_init[] = {
-	/* DSTB OUT */
-	SMART_CMD(0x00),
-	SMART_CMD_NOOP,
-	SMART_DELAY(1),
-
-	SMART_CMD(0x00),
-	SMART_CMD_NOOP,
-	SMART_DELAY(1),
-
-	SMART_CMD(0x00),
-	SMART_CMD_NOOP,
-	SMART_DELAY(1),
-
-	/* STB OUT */
-	SMART_CMD(0x00),
-	SMART_CMD(0x1D),
-	SMART_DAT(0x00),
-	SMART_DAT(0x05),
-	SMART_DELAY(1),
-
-	/* P-ON Init sequence */
-	SMART_CMD(0x00), /* OSC ON */
-	SMART_CMD(0x00),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x00),
-	SMART_CMD(0x01), /* SOURCE DRIVER SHIFT DIRECTION and display RAM setting */
-	SMART_DAT(0x01),
-	SMART_DAT(0x27),
-	SMART_CMD(0x00),
-	SMART_CMD(0x02), /* LINE INV */
-	SMART_DAT(0x02),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x03), /* IF mode(1) */
-	SMART_DAT(0x01), /* 8bit smart mode(8-8),high speed write mode */
-	SMART_DAT(0x30),
-	SMART_CMD(0x07),
-	SMART_CMD(0x00), /* RAM Write Mode */
-	SMART_DAT(0x00),
-	SMART_DAT(0x03),
-	SMART_CMD(0x00),
-
-	/* DISPLAY Setting,  262K, fixed(NO scroll), no split screen */
-	SMART_CMD(0x07),
-	SMART_DAT(0x40), /* 16/18/19 BPP */
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x08), /* BP, FP Seting, BP=2H, FP=3H */
-	SMART_DAT(0x03),
-	SMART_DAT(0x02),
-	SMART_CMD(0x00),
-	SMART_CMD(0x0C), /* IF mode(2), using internal clock & MPU */
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x0D), /* Frame setting, 1Min. Frequence, 16CLK */
-	SMART_DAT(0x00),
-	SMART_DAT(0x10),
-	SMART_CMD(0x00),
-	SMART_CMD(0x12), /* Timing(1),ASW W=4CLK, ASW ST=1CLK */
-	SMART_DAT(0x03),
-	SMART_DAT(0x02),
-	SMART_CMD(0x00),
-	SMART_CMD(0x13), /* Timing(2),OEV ST=0.5CLK, OEV ED=1CLK */
-	SMART_DAT(0x01),
-	SMART_DAT(0x02),
-	SMART_CMD(0x00),
-	SMART_CMD(0x14), /* Timing(3), ASW HOLD=0.5CLK */
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x15), /* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
-	SMART_DAT(0x20),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x1C),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x03),
-	SMART_CMD(0x00),
-	SMART_DAT(0x04),
-	SMART_DAT(0x03),
-	SMART_CMD(0x03),
-	SMART_CMD(0x01),
-	SMART_DAT(0x03),
-	SMART_DAT(0x04),
-	SMART_CMD(0x03),
-	SMART_CMD(0x02),
-	SMART_DAT(0x04),
-	SMART_DAT(0x03),
-	SMART_CMD(0x03),
-	SMART_CMD(0x03),
-	SMART_DAT(0x03),
-	SMART_DAT(0x03),
-	SMART_CMD(0x03),
-	SMART_CMD(0x04),
-	SMART_DAT(0x01),
-	SMART_DAT(0x01),
-	SMART_CMD(0x03),
-	SMART_CMD(0x05),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x04),
-	SMART_CMD(0x02),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x04),
-	SMART_CMD(0x03),
-	SMART_DAT(0x01),
-	SMART_DAT(0x3F),
-	SMART_DELAY(0),
-
-	/* DISP RAM setting: 240*320 */
-	SMART_CMD(0x04), /* HADDR, START 0 */
-	SMART_CMD(0x06),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00), /* x1,3 */
-	SMART_CMD(0x04), /* HADDR,  END   4 */
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0xEF), /* x2, 7 */
-	SMART_CMD(0x04), /* VADDR, START 8 */
-	SMART_CMD(0x08),
-	SMART_DAT(0x00), /* y1, 10 */
-	SMART_DAT(0x00), /* y1, 11 */
-	SMART_CMD(0x04), /* VADDR, END 12 */
-	SMART_CMD(0x09),
-	SMART_DAT(0x01), /* y2, 14 */
-	SMART_DAT(0x3F), /* y2, 15 */
-	SMART_CMD(0x02), /* RAM ADDR SETTING 16 */
-	SMART_CMD(0x00),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00), /* x1, 19 */
-	SMART_CMD(0x02), /* RAM ADDR SETTING 20 */
-	SMART_CMD(0x01),
-	SMART_DAT(0x00), /* y1, 22 */
-	SMART_DAT(0x00), /* y1, 23 */
-};
-
-static uint16_t panel_on[] = {
-	/* Power-IC ON */
-	SMART_CMD(0x01),
-	SMART_CMD(0x02),
-	SMART_DAT(0x07),
-	SMART_DAT(0x7D),
-	SMART_CMD(0x01),
-	SMART_CMD(0x03),
-	SMART_DAT(0x00),
-	SMART_DAT(0x05),
-	SMART_CMD(0x01),
-	SMART_CMD(0x04),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x01),
-	SMART_CMD(0x05),
-	SMART_DAT(0x00),
-	SMART_DAT(0x15),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xC0),
-	SMART_DAT(0x10),
-	SMART_DELAY(30),
-
-	/* DISP ON */
-	SMART_CMD(0x01),
-	SMART_CMD(0x01),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xFF),
-	SMART_DAT(0xFE),
-	SMART_DELAY(150),
-};
-
-static uint16_t panel_off[] = {
-	SMART_CMD(0x00),
-	SMART_CMD(0x1E),
-	SMART_DAT(0x00),
-	SMART_DAT(0x0A),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xFF),
-	SMART_DAT(0xEE),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xF8),
-	SMART_DAT(0x12),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xE8),
-	SMART_DAT(0x11),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xC0),
-	SMART_DAT(0x11),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0x40),
-	SMART_DAT(0x11),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0x00),
-	SMART_DAT(0x10),
-};
-
-static uint16_t update_framedata[] = {
-	/* write ram */
-	SMART_CMD(0x02),
-	SMART_CMD(0x02),
-
-	/* write frame data */
-	SMART_CMD_WRITE_FRAME,
-};
-
-static void ltm020d550_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	struct fb_info *info = container_of(var, struct fb_info, var);
-
-	if (on) {
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_init));
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_on));
-	} else {
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_off));
-	}
-
-	if (pxafb_smart_flush(info))
-		pr_err("%s: timed out\n", __func__);
-}
-
-static void ltm020d550_update(struct fb_info *info)
-{
-	pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
-	pxafb_smart_flush(info);
-}
-
-static struct pxafb_mode_info toshiba_ltm020d550_modes[] = {
-	[0] = {
-		.xres			= 240,
-		.yres			= 320,
-		.bpp			= 16,
-		.a0csrd_set_hld		= 30,
-		.a0cswr_set_hld		= 30,
-		.wr_pulse_width		= 30,
-		.rd_pulse_width 	= 170,
-		.op_hold_time 		= 30,
-		.cmd_inh_time		= 60,
-
-		/* L_LCLK_A0 and L_LCLK_RD active low */
-		.sync			= FB_SYNC_HOR_HIGH_ACT |
-					  FB_SYNC_VERT_HIGH_ACT,
-	},
-};
-
-static struct pxafb_mach_info tavorevb_lcd_info = {
-	.modes			= toshiba_ltm020d550_modes,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= ltm020d550_lcd_power,
-	.smart_update		= ltm020d550_update,
-};
-
-static void __init tavorevb_init_lcd(void)
-{
-	pwm_add_table(tavorevb_pwm_lookup, ARRAY_SIZE(tavorevb_pwm_lookup));
-	platform_device_register(&tavorevb_backlight_devices[0]);
-	platform_device_register(&tavorevb_backlight_devices[1]);
-	pxa_set_fb_info(NULL, &tavorevb_lcd_info);
-}
-#else
-static inline void tavorevb_init_lcd(void) {}
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
-
-static void __init tavorevb_init(void)
-{
-	/* initialize MFP configurations */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_device_register(&smc91x_device);
-
-	tavorevb_init_lcd();
-	tavorevb_init_keypad();
-}
-
-MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
-	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
-	.atag_offset    = 0x100,
-	.map_io         = pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa3xx_init_irq,
-	.handle_irq       = pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = tavorevb_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
deleted file mode 100644
index c9541632b8b1..000000000000
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ /dev/null
@@ -1,134 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Bluetooth built-in chip control
- *
- * Copyright (c) 2008 Dmitry Baryshkov
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/rfkill.h>
-
-#include "tosa_bt.h"
-
-static void tosa_bt_on(struct tosa_bt_data *data)
-{
-	gpio_set_value(data->gpio_reset, 0);
-	gpio_set_value(data->gpio_pwr, 1);
-	gpio_set_value(data->gpio_reset, 1);
-	mdelay(20);
-	gpio_set_value(data->gpio_reset, 0);
-}
-
-static void tosa_bt_off(struct tosa_bt_data *data)
-{
-	gpio_set_value(data->gpio_reset, 1);
-	mdelay(10);
-	gpio_set_value(data->gpio_pwr, 0);
-	gpio_set_value(data->gpio_reset, 0);
-}
-
-static int tosa_bt_set_block(void *data, bool blocked)
-{
-	pr_info("BT_RADIO going: %s\n", blocked ? "off" : "on");
-
-	if (!blocked) {
-		pr_info("TOSA_BT: going ON\n");
-		tosa_bt_on(data);
-	} else {
-		pr_info("TOSA_BT: going OFF\n");
-		tosa_bt_off(data);
-	}
-
-	return 0;
-}
-
-static const struct rfkill_ops tosa_bt_rfkill_ops = {
-	.set_block = tosa_bt_set_block,
-};
-
-static int tosa_bt_probe(struct platform_device *dev)
-{
-	int rc;
-	struct rfkill *rfk;
-
-	struct tosa_bt_data *data = dev->dev.platform_data;
-
-	rc = gpio_request(data->gpio_reset, "Bluetooth reset");
-	if (rc)
-		goto err_reset;
-	rc = gpio_direction_output(data->gpio_reset, 0);
-	if (rc)
-		goto err_reset_dir;
-	rc = gpio_request(data->gpio_pwr, "Bluetooth power");
-	if (rc)
-		goto err_pwr;
-	rc = gpio_direction_output(data->gpio_pwr, 0);
-	if (rc)
-		goto err_pwr_dir;
-
-	rfk = rfkill_alloc("tosa-bt", &dev->dev, RFKILL_TYPE_BLUETOOTH,
-			   &tosa_bt_rfkill_ops, data);
-	if (!rfk) {
-		rc = -ENOMEM;
-		goto err_rfk_alloc;
-	}
-
-	rc = rfkill_register(rfk);
-	if (rc)
-		goto err_rfkill;
-
-	platform_set_drvdata(dev, rfk);
-
-	return 0;
-
-err_rfkill:
-	rfkill_destroy(rfk);
-err_rfk_alloc:
-	tosa_bt_off(data);
-err_pwr_dir:
-	gpio_free(data->gpio_pwr);
-err_pwr:
-err_reset_dir:
-	gpio_free(data->gpio_reset);
-err_reset:
-	return rc;
-}
-
-static int tosa_bt_remove(struct platform_device *dev)
-{
-	struct tosa_bt_data *data = dev->dev.platform_data;
-	struct rfkill *rfk = platform_get_drvdata(dev);
-
-	platform_set_drvdata(dev, NULL);
-
-	if (rfk) {
-		rfkill_unregister(rfk);
-		rfkill_destroy(rfk);
-	}
-	rfk = NULL;
-
-	tosa_bt_off(data);
-
-	gpio_free(data->gpio_pwr);
-	gpio_free(data->gpio_reset);
-
-	return 0;
-}
-
-static struct platform_driver tosa_bt_driver = {
-	.probe = tosa_bt_probe,
-	.remove = tosa_bt_remove,
-
-	.driver = {
-		.name = "tosa-bt",
-	},
-};
-module_platform_driver(tosa_bt_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Dmitry Baryshkov");
-MODULE_DESCRIPTION("Bluetooth built-in chip control");
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
deleted file mode 100644
index d41641d6cfcd..000000000000
--- a/arch/arm/mach-pxa/tosa.c
+++ /dev/null
@@ -1,946 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Support for Sharp SL-C6000x PDAs
- *  Model: (Tosa)
- *
- *  Copyright (c) 2005 Dirk Opfer
- *
- *	Based on code written by Sharp/Lineo for 2.4 kernels
- */
-
-#include <linux/clkdev.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/mmc/host.h>
-#include <linux/mfd/tc6393xb.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pm.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/power/gpio-charger.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/reboot.h>
-#include <linux/memblock.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include "pxa25x.h"
-#include "reset.h"
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include "udc.h"
-#include "tosa_bt.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "smemc.h"
-
-#include <asm/mach/arch.h>
-#include "tosa.h"
-
-#include <asm/hardware/scoop.h>
-#include <asm/mach/sharpsl_param.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long tosa_pin_config[] = {
-	GPIO78_nCS_2, /* Scoop */
-	GPIO80_nCS_4, /* tg6393xb */
-	GPIO33_nCS_5, /* Scoop */
-
-	// GPIO76 CARD_VCC_ON1
-
-	GPIO19_GPIO, /* Reset out */
-	GPIO1_RST | WAKEUP_ON_EDGE_FALL,
-
-	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* WAKE_UP */
-	GPIO2_GPIO | WAKEUP_ON_EDGE_BOTH, /* AC_IN */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* RECORD */
-	GPIO4_GPIO | WAKEUP_ON_EDGE_FALL, /* SYNC */
-	GPIO20_GPIO, /* EAR_IN */
-	GPIO22_GPIO, /* On */
-
-	GPIO5_GPIO, /* USB_IN */
-	GPIO32_GPIO, /* Pen IRQ */
-
-	GPIO7_GPIO, /* Jacket Detect */
-	GPIO14_GPIO, /* BAT0_CRG */
-	GPIO12_GPIO, /* BAT1_CRG */
-	GPIO17_GPIO, /* BAT0_LOW */
-	GPIO84_GPIO, /* BAT1_LOW */
-	GPIO38_GPIO, /* BAT_LOCK */
-
-	GPIO11_3_6MHz,
-	GPIO15_GPIO, /* TC6393XB IRQ */
-	GPIO18_RDY,
-	GPIO27_GPIO, /* LCD Sync */
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-	GPIO9_GPIO, /* Detect */
-	GPIO10_GPIO, /* nSD_INT */
-
-	/* CF */
-	GPIO13_GPIO, /* CD_IRQ */
-	GPIO21_GPIO, /* Main Slot IRQ */
-	GPIO36_GPIO, /* Jacket Slot IRQ */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* AC97 */
-	GPIO31_AC97_SYNC,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	// GPIO79 nAUD_IRQ
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO37_FFUART_DSR,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* Keybd */
-	GPIO58_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 0 */
-	GPIO59_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 1 */
-	GPIO60_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 2 */
-	GPIO61_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 3 */
-	GPIO62_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 4 */
-	GPIO63_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 5 */
-	GPIO64_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 6 */
-	GPIO65_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 7 */
-	GPIO66_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 8 */
-	GPIO67_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 9 */
-	GPIO68_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 10 */
-	GPIO69_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 0 */
-	GPIO70_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 1 */
-	GPIO71_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 2 */
-	GPIO72_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 3 */
-	GPIO73_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 4 */
-	GPIO74_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 5 */
-	GPIO75_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 6 */
-
-	/* SPI */
-	GPIO81_SSP2_CLK_OUT,
-	GPIO82_SSP2_FRM_OUT,
-	GPIO83_SSP2_TXD,
-
-	/* IrDA is managed in other way */
-	GPIO46_GPIO,
-	GPIO47_GPIO,
-};
-
-/*
- * SCOOP Device
- */
-static struct resource tosa_scoop_resources[] = {
-	[0] = {
-		.start	= TOSA_CF_PHYS,
-		.end	= TOSA_CF_PHYS + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config tosa_scoop_setup = {
-	.io_dir 	= TOSA_SCOOP_IO_DIR,
-	.gpio_base	= TOSA_SCOOP_GPIO_BASE,
-};
-
-static struct platform_device tosascoop_device = {
-	.name		= "sharp-scoop",
-	.id		= 0,
-	.dev		= {
- 		.platform_data	= &tosa_scoop_setup,
-	},
-	.num_resources	= ARRAY_SIZE(tosa_scoop_resources),
-	.resource	= tosa_scoop_resources,
-};
-
-
-/*
- * SCOOP Device Jacket
- */
-static struct resource tosa_scoop_jc_resources[] = {
-	[0] = {
-		.start		= TOSA_SCOOP_PHYS + 0x40,
-		.end		= TOSA_SCOOP_PHYS + 0xfff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config tosa_scoop_jc_setup = {
-	.io_dir 	= TOSA_SCOOP_JC_IO_DIR,
-	.gpio_base	= TOSA_SCOOP_JC_GPIO_BASE,
-};
-
-static struct platform_device tosascoop_jc_device = {
-	.name		= "sharp-scoop",
-	.id		= 1,
-	.dev		= {
- 		.platform_data	= &tosa_scoop_jc_setup,
-		.parent 	= &tosascoop_device.dev,
-	},
-	.num_resources	= ARRAY_SIZE(tosa_scoop_jc_resources),
-	.resource	= tosa_scoop_jc_resources,
-};
-
-/*
- * PCMCIA
- */
-static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
-{
-	.dev        = &tosascoop_device.dev,
-	.irq        = TOSA_IRQ_GPIO_CF_IRQ,
-	.cd_irq     = TOSA_IRQ_GPIO_CF_CD,
-	.cd_irq_str = "PCMCIA0 CD",
-},{
-	.dev        = &tosascoop_jc_device.dev,
-	.irq        = TOSA_IRQ_GPIO_JC_CF_IRQ,
-	.cd_irq     = -1,
-},
-};
-
-static struct scoop_pcmcia_config tosa_pcmcia_config = {
-	.devs         = &tosa_pcmcia_scoop[0],
-	.num_devs     = 2,
-};
-
-/*
- * USB Device Controller
- */
-static struct gpiod_lookup_table tosa_udc_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_USB_IN,
-			    "vbus", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_USB_PULLUP,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device tosa_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-/*
- * MMC/SD Device
- */
-static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
-{
-	int err;
-
-	err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
-		goto err_gpio_int;
-	}
-	err = gpio_direction_input(TOSA_GPIO_nSD_INT);
-	if (err)
-		goto err_gpio_int_dir;
-
-	return 0;
-
-err_gpio_int_dir:
-	gpio_free(TOSA_GPIO_nSD_INT);
-err_gpio_int:
-	return err;
-}
-
-static void tosa_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(TOSA_GPIO_nSD_INT);
-}
-
-static struct pxamci_platform_data tosa_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask       	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init           	= tosa_mci_init,
-	.exit           	= tosa_mci_exit,
-};
-
-static struct gpiod_lookup_table tosa_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_nSD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("sharp-scoop.0", TOSA_GPIO_SD_WP - TOSA_SCOOP_GPIO_BASE,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("sharp-scoop.0", TOSA_GPIO_PWR_ON - TOSA_SCOOP_GPIO_BASE,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/*
- * Irda
- */
-static void tosa_irda_transceiver_mode(struct device *dev, int mode)
-{
-	if (mode & IR_OFF) {
-		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
-		pxa2xx_transceiver_mode(dev, mode);
-		gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
-	} else {
-		pxa2xx_transceiver_mode(dev, mode);
-		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
-	}
-}
-
-static int tosa_irda_startup(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
-	if (ret)
-		goto err_tx;
-	ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
-	if (ret)
-		goto err_tx_dir;
-
-	ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
-	if (ret)
-		goto err_pwr;
-
-	ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
-	if (ret)
-		goto err_pwr_dir;
-
-	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
-
-	return 0;
-
-err_pwr_dir:
-	gpio_free(TOSA_GPIO_IR_POWERDWN);
-err_pwr:
-err_tx_dir:
-	gpio_free(TOSA_GPIO_IRDA_TX);
-err_tx:
-	return ret;
-}
-
-static void tosa_irda_shutdown(struct device *dev)
-{
-	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
-	gpio_free(TOSA_GPIO_IR_POWERDWN);
-	gpio_free(TOSA_GPIO_IRDA_TX);
-}
-
-static struct pxaficp_platform_data tosa_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= tosa_irda_transceiver_mode,
-	.startup		= tosa_irda_startup,
-	.shutdown		= tosa_irda_shutdown,
-};
-
-/*
- * Tosa AC IN
- */
-static struct gpiod_lookup_table tosa_power_gpiod_table = {
-	.dev_id = "gpio-charger",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_AC_IN,
-			    NULL, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static char *tosa_ac_supplied_to[] = {
-	"main-battery",
-	"backup-battery",
-	"jacket-battery",
-};
-
-static struct gpio_charger_platform_data tosa_power_data = {
-	.name			= "charger",
-	.type			= POWER_SUPPLY_TYPE_MAINS,
-	.supplied_to		= tosa_ac_supplied_to,
-	.num_supplicants	= ARRAY_SIZE(tosa_ac_supplied_to),
-};
-
-static struct resource tosa_power_resource[] = {
-	{
-		.name		= "ac",
-		.start		= PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
-		.end		= PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
-		.flags		= IORESOURCE_IRQ |
-				  IORESOURCE_IRQ_HIGHEDGE |
-				  IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device tosa_power_device = {
-	.name			= "gpio-charger",
-	.id			= -1,
-	.dev.platform_data	= &tosa_power_data,
-	.resource		= tosa_power_resource,
-	.num_resources		= ARRAY_SIZE(tosa_power_resource),
-};
-
-/*
- * Tosa Keyboard
- */
-static const uint32_t tosakbd_keymap[] = {
-	KEY(0, 1, KEY_W),
-	KEY(0, 5, KEY_K),
-	KEY(0, 6, KEY_BACKSPACE),
-	KEY(0, 7, KEY_P),
-	KEY(1, 0, KEY_Q),
-	KEY(1, 1, KEY_E),
-	KEY(1, 2, KEY_T),
-	KEY(1, 3, KEY_Y),
-	KEY(1, 5, KEY_O),
-	KEY(1, 6, KEY_I),
-	KEY(1, 7, KEY_COMMA),
-	KEY(2, 0, KEY_A),
-	KEY(2, 1, KEY_D),
-	KEY(2, 2, KEY_G),
-	KEY(2, 3, KEY_U),
-	KEY(2, 5, KEY_L),
-	KEY(2, 6, KEY_ENTER),
-	KEY(2, 7, KEY_DOT),
-	KEY(3, 0, KEY_Z),
-	KEY(3, 1, KEY_C),
-	KEY(3, 2, KEY_V),
-	KEY(3, 3, KEY_J),
-	KEY(3, 4, TOSA_KEY_ADDRESSBOOK),
-	KEY(3, 5, TOSA_KEY_CANCEL),
-	KEY(3, 6, TOSA_KEY_CENTER),
-	KEY(3, 7, TOSA_KEY_OK),
-	KEY(3, 8, KEY_LEFTSHIFT),
-	KEY(4, 0, KEY_S),
-	KEY(4, 1, KEY_R),
-	KEY(4, 2, KEY_B),
-	KEY(4, 3, KEY_N),
-	KEY(4, 4, TOSA_KEY_CALENDAR),
-	KEY(4, 5, TOSA_KEY_HOMEPAGE),
-	KEY(4, 6, KEY_LEFTCTRL),
-	KEY(4, 7, TOSA_KEY_LIGHT),
-	KEY(4, 9, KEY_RIGHTSHIFT),
-	KEY(5, 0, KEY_TAB),
-	KEY(5, 1, KEY_SLASH),
-	KEY(5, 2, KEY_H),
-	KEY(5, 3, KEY_M),
-	KEY(5, 4, TOSA_KEY_MENU),
-	KEY(5, 6, KEY_UP),
-	KEY(5, 10, TOSA_KEY_FN),
-	KEY(6, 0, KEY_X),
-	KEY(6, 1, KEY_F),
-	KEY(6, 2, KEY_SPACE),
-	KEY(6, 3, KEY_APOSTROPHE),
-	KEY(6, 4, TOSA_KEY_MAIL),
-	KEY(6, 5, KEY_LEFT),
-	KEY(6, 6, KEY_DOWN),
-	KEY(6, 7, KEY_RIGHT),
-};
-
-static struct matrix_keymap_data tosakbd_keymap_data = {
-	.keymap		= tosakbd_keymap,
-	.keymap_size	= ARRAY_SIZE(tosakbd_keymap),
-};
-
-static const int tosakbd_col_gpios[] =
-			{ 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68 };
-static const int tosakbd_row_gpios[] =
-			{ 69, 70, 71, 72, 73, 74, 75 };
-
-static struct matrix_keypad_platform_data tosakbd_pdata = {
-	.keymap_data		= &tosakbd_keymap_data,
-	.row_gpios		= tosakbd_row_gpios,
-	.col_gpios		= tosakbd_col_gpios,
-	.num_row_gpios		= ARRAY_SIZE(tosakbd_row_gpios),
-	.num_col_gpios		= ARRAY_SIZE(tosakbd_col_gpios),
-	.col_scan_delay_us	= 10,
-	.debounce_ms		= 10,
-	.wakeup			= 1,
-};
-
-static struct platform_device tosakbd_device = {
-	.name		= "matrix-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &tosakbd_pdata,
-	},
-};
-
-static struct gpio_keys_button tosa_gpio_keys[] = {
-	/*
-	 * Two following keys are directly tied to "ON" button of tosa. Why?
-	 * The first one can be used as a wakeup source, the second can't;
-	 * also the first one is OR of ac_powered and on_button.
-	 */
-	{
-		.type	= EV_PWR,
-		.code	= KEY_RESERVED,
-		.gpio	= TOSA_GPIO_POWERON,
-		.desc	= "Poweron",
-		.wakeup	= 1,
-		.active_low = 1,
-	},
-	{
-		.type	= EV_PWR,
-		.code	= KEY_SUSPEND,
-		.gpio	= TOSA_GPIO_ON_KEY,
-		.desc	= "On key",
-		/*
-		 * can't be used as wakeup
-		 * .wakeup	= 1,
-		 */
-		.active_low = 1,
-	},
-	{
-		.type	= EV_KEY,
-		.code	= TOSA_KEY_RECORD,
-		.gpio	= TOSA_GPIO_RECORD_BTN,
-		.desc	= "Record Button",
-		.wakeup	= 1,
-		.active_low = 1,
-	},
-	{
-		.type	= EV_KEY,
-		.code	= TOSA_KEY_SYNC,
-		.gpio	= TOSA_GPIO_SYNC,
-		.desc	= "Sync Button",
-		.wakeup	= 1,
-		.active_low = 1,
-	},
-	{
-		.type	= EV_SW,
-		.code	= SW_HEADPHONE_INSERT,
-		.gpio	= TOSA_GPIO_EAR_IN,
-		.desc	= "HeadPhone insert",
-		.active_low = 1,
-		.debounce_interval = 300,
-	},
-};
-
-static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
-	.buttons	= tosa_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(tosa_gpio_keys),
-};
-
-static struct platform_device tosa_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &tosa_gpio_keys_platform_data,
-	},
-};
-
-/*
- * Tosa LEDs
- */
-static struct gpio_led tosa_gpio_leds[] = {
-	{
-		.name			= "tosa:amber:charge",
-		.default_trigger	= "main-battery-charging",
-		.gpio			= TOSA_GPIO_CHRG_ERR_LED,
-	},
-	{
-		.name			= "tosa:green:mail",
-		.default_trigger	= "nand-disk",
-		.gpio			= TOSA_GPIO_NOTE_LED,
-	},
-	{
-		.name			= "tosa:dual:wlan",
-		.default_trigger	= "none",
-		.gpio			= TOSA_GPIO_WLAN_LED,
-	},
-	{
-		.name			= "tosa:blue:bluetooth",
-		.default_trigger	= "tosa-bt",
-		.gpio			= TOSA_GPIO_BT_LED,
-	},
-};
-
-static struct gpio_led_platform_data tosa_gpio_leds_platform_data = {
-	.leds		= tosa_gpio_leds,
-	.num_leds	= ARRAY_SIZE(tosa_gpio_leds),
-};
-
-static struct platform_device tosaled_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &tosa_gpio_leds_platform_data,
-	},
-};
-
-/*
- * Toshiba Mobile IO Controller
- */
-static struct resource tc6393xb_resources[] = {
-	[0] = {
-		.start	= TOSA_LCDC_PHYS,
-		.end	= TOSA_LCDC_PHYS + 0x3ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-
-	[1] = {
-		.start	= TOSA_IRQ_GPIO_TC6393XB_INT,
-		.end	= TOSA_IRQ_GPIO_TC6393XB_INT,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct gpiod_lookup_table tosa_battery_gpio_table = {
-	.dev_id = "wm97xx-battery",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT0_CRG,
-			    "main battery full", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT1_CRG,
-			    "jacket battery full", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT0_LOW,
-			    "main battery low", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT1_LOW,
-			    "jacket battery low", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_JACKET_DETECT,
-			    "jacket detect", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static int tosa_tc6393xb_enable(struct platform_device *dev)
-{
-	int rc;
-
-	rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
-	if (rc)
-		goto err_req_pclr;
-	rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
-	if (rc)
-		goto err_req_suspend;
-	rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "tc6393xb l3v");
-	if (rc)
-		goto err_req_l3v;
-	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
-	if (rc)
-		goto err_dir_l3v;
-	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
-	if (rc)
-		goto err_dir_suspend;
-	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
-	if (rc)
-		goto err_dir_pclr;
-
-	mdelay(1);
-
-	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
-
-	mdelay(10);
-
-	gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
-	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
-
-	return 0;
-err_dir_pclr:
-err_dir_suspend:
-err_dir_l3v:
-	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
-err_req_l3v:
-	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
-err_req_suspend:
-	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
-err_req_pclr:
-	return rc;
-}
-
-static void tosa_tc6393xb_disable(struct platform_device *dev)
-{
-	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
-	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
-	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
-}
-
-static int tosa_tc6393xb_resume(struct platform_device *dev)
-{
-	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
-	mdelay(10);
-	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
-	mdelay(10);
-
-	return 0;
-}
-
-static int tosa_tc6393xb_suspend(struct platform_device *dev)
-{
-	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
-	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
-	return 0;
-}
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
-	.options	= 0,
-	.offs		= 4,
-	.len		= 2,
-	.pattern	= scan_ff_pattern
-};
-
-static const char * const probes[] = {
-	"cmdlinepart",
-	"ofpart",
-	"sharpslpart",
-	NULL,
-};
-
-static struct tmio_nand_data tosa_tc6393xb_nand_config = {
-	.badblock_pattern = &tosa_tc6393xb_nand_bbt,
-	.part_parsers = probes,
-};
-
-#ifdef CONFIG_MFD_TC6393XB
-static struct fb_videomode tosa_tc6393xb_lcd_mode[] = {
-	{
-		.xres = 480,
-		.yres = 640,
-		.pixclock = 0x002cdf00,/* PLL divisor */
-		.left_margin = 0x004c,
-		.right_margin = 0x005b,
-		.upper_margin = 0x0001,
-		.lower_margin = 0x000d,
-		.hsync_len = 0x0002,
-		.vsync_len = 0x0001,
-		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode = FB_VMODE_NONINTERLACED,
-	},{
-		.xres = 240,
-		.yres = 320,
-		.pixclock = 0x00e7f203,/* PLL divisor */
-		.left_margin = 0x0024,
-		.right_margin = 0x002f,
-		.upper_margin = 0x0001,
-		.lower_margin = 0x000d,
-		.hsync_len = 0x0002,
-		.vsync_len = 0x0001,
-		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode = FB_VMODE_NONINTERLACED,
-	}
-};
-
-static struct tmio_fb_data tosa_tc6393xb_fb_config = {
-	.lcd_set_power	= tc6393xb_lcd_set_power,
-	.lcd_mode	= tc6393xb_lcd_mode,
-	.num_modes	= ARRAY_SIZE(tosa_tc6393xb_lcd_mode),
-	.modes		= &tosa_tc6393xb_lcd_mode[0],
-	.height		= 82,
-	.width		= 60,
-};
-#endif
-
-static struct tc6393xb_platform_data tosa_tc6393xb_data = {
-	.scr_pll2cr	= 0x0cc1,
-	.scr_gper	= 0x3300,
-
-	.irq_base	= IRQ_BOARD_START,
-
-	.enable		= tosa_tc6393xb_enable,
-	.disable	= tosa_tc6393xb_disable,
-	.suspend	= tosa_tc6393xb_suspend,
-	.resume		= tosa_tc6393xb_resume,
-
-	.nand_data	= &tosa_tc6393xb_nand_config,
-#ifdef CONFIG_MFD_TC6393XB
-	.fb_data	= &tosa_tc6393xb_fb_config,
-#endif
-
-	.resume_restore = 1,
-};
-
-
-static struct platform_device tc6393xb_device = {
-	.name	= "tc6393xb",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &tosa_tc6393xb_data,
-	},
-	.num_resources	= ARRAY_SIZE(tc6393xb_resources),
-	.resource	= tc6393xb_resources,
-};
-
-static struct tosa_bt_data tosa_bt_data = {
-	.gpio_pwr	= TOSA_GPIO_BT_PWR_EN,
-	.gpio_reset	= TOSA_GPIO_BT_RESET,
-};
-
-static struct platform_device tosa_bt_device = {
-	.name	= "tosa-bt",
-	.id	= -1,
-	.dev.platform_data = &tosa_bt_data,
-};
-
-static struct pxa2xx_spi_controller pxa_ssp_master_info = {
-	.num_chipselect	= 1,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "tosa-lcd",
-		// .platform_data
-		.max_speed_hz	= 28750,
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static struct mtd_partition sharpsl_rom_parts[] = {
-	{
-		.name	="Boot PROM Filesystem",
-		.offset	= 0x00160000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data sharpsl_rom_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
-	.parts		= sharpsl_rom_parts,
-};
-
-static struct resource sharpsl_rom_resources[] = {
-	{
-		.start	= 0x00000000,
-		.end	= 0x007fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.resource = sharpsl_rom_resources,
-	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
-	.dev.platform_data = &sharpsl_rom_data,
-};
-
-static struct platform_device wm9712_device = {
-	.name	= "wm9712-codec",
-	.id	= -1,
-};
-
-static struct platform_device tosa_audio_device = {
-	.name	= "tosa-audio",
-	.id	= -1,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&tosascoop_device,
-	&tosascoop_jc_device,
-	&tc6393xb_device,
-	&tosa_power_device,
-	&tosakbd_device,
-	&tosa_gpio_keys_device,
-	&tosaled_device,
-	&tosa_bt_device,
-	&sharpsl_rom_device,
-	&wm9712_device,
-	&tosa_gpio_vbus,
-	&tosa_audio_device,
-};
-
-static void tosa_poweroff(void)
-{
-	pxa_restart(REBOOT_GPIO, NULL);
-}
-
-static void tosa_restart(enum reboot_mode mode, const char *cmd)
-{
-	uint32_t msc0 = __raw_readl(MSC0);
-
-	/* Bootloader magic for a reboot */
-	if((msc0 & 0xffff0000) == 0x7ff00000)
-		__raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
-
-	tosa_poweroff();
-}
-
-static void __init tosa_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	gpio_set_wake(MFP_PIN_GPIO1, 1);
-	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
-
-	init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
-
-	pm_power_off = tosa_poweroff;
-
-	PCFR |= PCFR_OPDE;
-
-	/* enable batt_fault */
-	PMCR = 0x01;
-
-	gpiod_add_lookup_table(&tosa_battery_gpio_table);
-
-	gpiod_add_lookup_table(&tosa_mci_gpio_table);
-	pxa_set_mci_info(&tosa_mci_platform_data);
-	pxa_set_ficp_info(&tosa_ficp_platform_data);
-	pxa_set_i2c_info(NULL);
-	pxa_set_ac97_info(NULL);
-	platform_scoop_config = &tosa_pcmcia_config;
-
-	pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-	clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
-
-	gpiod_add_lookup_table(&tosa_udc_gpiod_table);
-	gpiod_add_lookup_table(&tosa_power_gpiod_table);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init fixup_tosa(struct tag *tags, char **cmdline)
-{
-	sharpsl_save_param();
-	memblock_add(0xa0000000, SZ_64M);
-}
-
-MACHINE_START(TOSA, "SHARP Tosa")
-	.fixup          = fixup_tosa,
-	.map_io         = pxa25x_map_io,
-	.nr_irqs	= TOSA_NR_IRQS,
-	.init_irq       = pxa25x_init_irq,
-	.handle_irq       = pxa25x_handle_irq,
-	.init_machine   = tosa_init,
-	.init_time	= pxa_timer_init,
-	.restart	= tosa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa.h b/arch/arm/mach-pxa/tosa.h
deleted file mode 100644
index 3b3efa0a0e22..000000000000
--- a/arch/arm/mach-pxa/tosa.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Hardware specific definitions for Sharp SL-C6000x series of PDAs
- *
- * Copyright (c) 2005 Dirk Opfer
- *
- * Based on Sharp's 2.4 kernel patches
- */
-#ifndef _ASM_ARCH_TOSA_H_
-#define _ASM_ARCH_TOSA_H_ 1
-
-#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
-
-/*  TOSA Chip selects  */
-#define TOSA_LCDC_PHYS		PXA_CS4_PHYS
-/* Internel Scoop */
-#define TOSA_CF_PHYS		(PXA_CS2_PHYS + 0x00800000)
-/* Jacket Scoop */
-#define TOSA_SCOOP_PHYS  	(PXA_CS5_PHYS + 0x00800000)
-
-#define TOSA_NR_IRQS		(IRQ_BOARD_START + TC6393XB_NR_IRQS)
-/*
- * SCOOP2 internal GPIOs
- */
-#define TOSA_SCOOP_GPIO_BASE		PXA_NR_BUILTIN_GPIO
-#define TOSA_SCOOP_PXA_VCORE1		SCOOP_GPCR_PA11
-#define TOSA_GPIO_TC6393XB_REST_IN	(TOSA_SCOOP_GPIO_BASE + 1)
-#define TOSA_GPIO_IR_POWERDWN		(TOSA_SCOOP_GPIO_BASE + 2)
-#define TOSA_GPIO_SD_WP			(TOSA_SCOOP_GPIO_BASE + 3)
-#define TOSA_GPIO_PWR_ON		(TOSA_SCOOP_GPIO_BASE + 4)
-#define TOSA_SCOOP_AUD_PWR_ON		SCOOP_GPCR_PA16
-#define TOSA_GPIO_BT_RESET		(TOSA_SCOOP_GPIO_BASE + 6)
-#define TOSA_GPIO_BT_PWR_EN		(TOSA_SCOOP_GPIO_BASE + 7)
-#define TOSA_SCOOP_AC_IN_OL		SCOOP_GPCR_PA19
-
-/* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_IO_DIR     (TOSA_SCOOP_PXA_VCORE1 | \
-		TOSA_SCOOP_AUD_PWR_ON)
-
-/*
- * SCOOP2 jacket GPIOs
- */
-#define TOSA_SCOOP_JC_GPIO_BASE		(PXA_NR_BUILTIN_GPIO + 12)
-#define TOSA_GPIO_BT_LED		(TOSA_SCOOP_JC_GPIO_BASE + 0)
-#define TOSA_GPIO_NOTE_LED		(TOSA_SCOOP_JC_GPIO_BASE + 1)
-#define TOSA_GPIO_CHRG_ERR_LED		(TOSA_SCOOP_JC_GPIO_BASE + 2)
-#define TOSA_GPIO_USB_PULLUP		(TOSA_SCOOP_JC_GPIO_BASE + 3)
-#define TOSA_GPIO_TC6393XB_SUSPEND	(TOSA_SCOOP_JC_GPIO_BASE + 4)
-#define TOSA_GPIO_TC6393XB_L3V_ON	(TOSA_SCOOP_JC_GPIO_BASE + 5)
-#define TOSA_SCOOP_JC_WLAN_DETECT	SCOOP_GPCR_PA17
-#define TOSA_GPIO_WLAN_LED		(TOSA_SCOOP_JC_GPIO_BASE + 7)
-#define TOSA_SCOOP_JC_CARD_LIMIT_SEL	SCOOP_GPCR_PA19
-
-/* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL)
-
-/*
- * PXA GPIOs
- */
-#define TOSA_GPIO_POWERON		(0)
-#define TOSA_GPIO_RESET			(1)
-#define TOSA_GPIO_AC_IN			(2)
-#define TOSA_GPIO_RECORD_BTN		(3)
-#define TOSA_GPIO_SYNC			(4)	/* Cradle SYNC Button */
-#define TOSA_GPIO_USB_IN		(5)
-#define TOSA_GPIO_JACKET_DETECT		(7)
-#define TOSA_GPIO_nSD_DETECT		(9)
-#define TOSA_GPIO_nSD_INT		(10)
-#define TOSA_GPIO_TC6393XB_CLK		(11)
-#define TOSA_GPIO_BAT1_CRG		(12)
-#define TOSA_GPIO_CF_CD			(13)
-#define TOSA_GPIO_BAT0_CRG		(14)
-#define TOSA_GPIO_TC6393XB_INT		(15)
-#define TOSA_GPIO_BAT0_LOW		(17)
-#define TOSA_GPIO_TC6393XB_RDY		(18)
-#define TOSA_GPIO_ON_RESET		(19)
-#define TOSA_GPIO_EAR_IN		(20)
-#define TOSA_GPIO_CF_IRQ		(21)	/* CF slot0 Ready */
-#define TOSA_GPIO_ON_KEY		(22)
-#define TOSA_GPIO_VGA_LINE		(27)
-#define TOSA_GPIO_TP_INT		(32)	/* Touch Panel pen down interrupt */
-#define TOSA_GPIO_JC_CF_IRQ		(36)	/* CF slot1 Ready */
-#define TOSA_GPIO_BAT_LOCKED		(38)	/* Battery locked */
-#define TOSA_GPIO_IRDA_TX		(47)
-#define TOSA_GPIO_TG_SPI_SCLK		(81)
-#define TOSA_GPIO_TG_SPI_CS		(82)
-#define TOSA_GPIO_TG_SPI_MOSI		(83)
-#define TOSA_GPIO_BAT1_LOW		(84)
-
-#define TOSA_GPIO_HP_IN			GPIO_EAR_IN
-
-#define TOSA_GPIO_MAIN_BAT_LOW		GPIO_BAT0_LOW
-
-#define TOSA_KEY_STROBE_NUM		(11)
-#define TOSA_KEY_SENSE_NUM		(7)
-
-#define TOSA_GPIO_HIGH_STROBE_BIT	(0xfc000000)
-#define TOSA_GPIO_LOW_STROBE_BIT	(0x0000001f)
-#define TOSA_GPIO_ALL_SENSE_BIT		(0x00000fe0)
-#define TOSA_GPIO_ALL_SENSE_RSHIFT	(5)
-#define TOSA_GPIO_STROBE_BIT(a)		GPIO_bit(58+(a))
-#define TOSA_GPIO_SENSE_BIT(a)		GPIO_bit(69+(a))
-#define TOSA_GAFR_HIGH_STROBE_BIT	(0xfff00000)
-#define TOSA_GAFR_LOW_STROBE_BIT	(0x000003ff)
-#define TOSA_GAFR_ALL_SENSE_BIT		(0x00fffc00)
-#define TOSA_GPIO_KEY_SENSE(a) 		(69+(a))
-#define TOSA_GPIO_KEY_STROBE(a)		(58+(a))
-
-/*
- * Interrupts
- */
-#define TOSA_IRQ_GPIO_WAKEUP        	PXA_GPIO_TO_IRQ(TOSA_GPIO_WAKEUP)
-#define TOSA_IRQ_GPIO_AC_IN         	PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN)
-#define TOSA_IRQ_GPIO_RECORD_BTN    	PXA_GPIO_TO_IRQ(TOSA_GPIO_RECORD_BTN)
-#define TOSA_IRQ_GPIO_SYNC          	PXA_GPIO_TO_IRQ(TOSA_GPIO_SYNC)
-#define TOSA_IRQ_GPIO_USB_IN        	PXA_GPIO_TO_IRQ(TOSA_GPIO_USB_IN)
-#define TOSA_IRQ_GPIO_JACKET_DETECT 	PXA_GPIO_TO_IRQ(TOSA_GPIO_JACKET_DETECT)
-#define TOSA_IRQ_GPIO_nSD_INT       	PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_INT)
-#define TOSA_IRQ_GPIO_nSD_DETECT    	PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_DETECT)
-#define TOSA_IRQ_GPIO_BAT1_CRG      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_CRG)
-#define TOSA_IRQ_GPIO_CF_CD         	PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_CD)
-#define TOSA_IRQ_GPIO_BAT0_CRG      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_CRG)
-#define TOSA_IRQ_GPIO_TC6393XB_INT    	PXA_GPIO_TO_IRQ(TOSA_GPIO_TC6393XB_INT)
-#define TOSA_IRQ_GPIO_BAT0_LOW      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_LOW)
-#define TOSA_IRQ_GPIO_EAR_IN        	PXA_GPIO_TO_IRQ(TOSA_GPIO_EAR_IN)
-#define TOSA_IRQ_GPIO_CF_IRQ        	PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_IRQ)
-#define TOSA_IRQ_GPIO_ON_KEY        	PXA_GPIO_TO_IRQ(TOSA_GPIO_ON_KEY)
-#define TOSA_IRQ_GPIO_VGA_LINE      	PXA_GPIO_TO_IRQ(TOSA_GPIO_VGA_LINE)
-#define TOSA_IRQ_GPIO_TP_INT        	PXA_GPIO_TO_IRQ(TOSA_GPIO_TP_INT)
-#define TOSA_IRQ_GPIO_JC_CF_IRQ     	PXA_GPIO_TO_IRQ(TOSA_GPIO_JC_CF_IRQ)
-#define TOSA_IRQ_GPIO_BAT_LOCKED    	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT_LOCKED)
-#define TOSA_IRQ_GPIO_BAT1_LOW      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_LOW)
-#define TOSA_IRQ_GPIO_KEY_SENSE(a)  	PXA_GPIO_TO_IRQ(69+(a))
-
-#define TOSA_IRQ_GPIO_MAIN_BAT_LOW 	PXA_GPIO_TO_IRQ(TOSA_GPIO_MAIN_BAT_LOW)
-
-#define TOSA_KEY_SYNC		KEY_102ND /* ??? */
-
-#ifndef CONFIG_TOSA_USE_EXT_KEYCODES
-#define TOSA_KEY_RECORD		KEY_YEN
-#define TOSA_KEY_ADDRESSBOOK	KEY_KATAKANA
-#define TOSA_KEY_CANCEL		KEY_ESC
-#define TOSA_KEY_CENTER		KEY_HIRAGANA
-#define TOSA_KEY_OK		KEY_HENKAN
-#define TOSA_KEY_CALENDAR	KEY_KATAKANAHIRAGANA
-#define TOSA_KEY_HOMEPAGE	KEY_HANGEUL
-#define TOSA_KEY_LIGHT		KEY_MUHENKAN
-#define TOSA_KEY_MENU		KEY_HANJA
-#define TOSA_KEY_FN		KEY_RIGHTALT
-#define TOSA_KEY_MAIL		KEY_ZENKAKUHANKAKU
-#else
-#define TOSA_KEY_RECORD		KEY_RECORD
-#define TOSA_KEY_ADDRESSBOOK	KEY_ADDRESSBOOK
-#define TOSA_KEY_CANCEL		KEY_CANCEL
-#define TOSA_KEY_CENTER		KEY_SELECT /* ??? */
-#define TOSA_KEY_OK		KEY_OK
-#define TOSA_KEY_CALENDAR	KEY_CALENDAR
-#define TOSA_KEY_HOMEPAGE	KEY_HOMEPAGE
-#define TOSA_KEY_LIGHT		KEY_KBDILLUMTOGGLE
-#define TOSA_KEY_MENU		KEY_MENU
-#define TOSA_KEY_FN		KEY_FN
-#define TOSA_KEY_MAIL		KEY_MAIL
-#endif
-
-#endif /* _ASM_ARCH_TOSA_H_ */
diff --git a/arch/arm/mach-pxa/tosa_bt.h b/arch/arm/mach-pxa/tosa_bt.h
deleted file mode 100644
index 56acd5dabec4..000000000000
--- a/arch/arm/mach-pxa/tosa_bt.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Tosa bluetooth built-in chip control.
- *
- * Later it may be shared with some other platforms.
- *
- * Copyright (c) 2008 Dmitry Baryshkov
- */
-#ifndef TOSA_BT_H
-#define TOSA_BT_H
-
-struct tosa_bt_data {
-	int gpio_pwr;
-	int gpio_reset;
-};
-
-#endif
-
diff --git a/arch/arm/mach-pxa/trizeps4-pcmcia.c b/arch/arm/mach-pxa/trizeps4-pcmcia.c
deleted file mode 100644
index 25e363770565..000000000000
--- a/arch/arm/mach-pxa/trizeps4-pcmcia.c
+++ /dev/null
@@ -1,200 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_trizeps4.c
- *
- * TRIZEPS PCMCIA specific routines.
- *
- * Author:	Jürgen Schindele
- * Created:	20 02, 2006
- * Copyright:	Jürgen Schindele
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include "pxa2xx-regs.h"
-#include "trizeps4.h"
-
-#include <pcmcia/soc_common.h>
-
-extern void board_pcmcia_power(int power);
-
-static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	/* we dont have voltage/card/ready detection
-	 * so we dont need interrupts for it
-	 */
-	switch (skt->nr) {
-	case 0:
-		skt->stat[SOC_STAT_CD].gpio = GPIO_PCD;
-		skt->stat[SOC_STAT_CD].name = "cs0_cd";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO_PRDY;
-		skt->stat[SOC_STAT_RDY].name = "cs0_rdy";
-		break;
-	default:
-		break;
-	}
-	/* release the reset of this card */
-	pr_debug("%s: sock %d irq %d\n", __func__, skt->nr, skt->socket.pci_irq);
-
-	return 0;
-}
-
-static unsigned long trizeps_pcmcia_status[2];
-
-static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-				struct pcmcia_state *state)
-{
-	unsigned short status = 0, change;
-	status = CFSR_readw();
-	change = (status ^ trizeps_pcmcia_status[skt->nr]) &
-				ConXS_CFSR_BVD_MASK;
-	if (change) {
-		trizeps_pcmcia_status[skt->nr] = status;
-		if (status & ConXS_CFSR_BVD1) {
-			/* enable_irq empty */
-		} else {
-			/* disable_irq empty */
-		}
-	}
-
-	switch (skt->nr) {
-	case 0:
-		/* just fill in fix states */
-		state->bvd1   = (status & ConXS_CFSR_BVD1) ? 1 : 0;
-		state->bvd2   = (status & ConXS_CFSR_BVD2) ? 1 : 0;
-		state->vs_3v  = (status & ConXS_CFSR_VS1) ? 0 : 1;
-		state->vs_Xv  = (status & ConXS_CFSR_VS2) ? 0 : 1;
-		break;
-
-#ifndef CONFIG_MACH_TRIZEPS_CONXS
-	/* on ConXS we only have one slot. Second is inactive */
-	case 1:
-		state->detect = 0;
-		state->ready  = 0;
-		state->bvd1   = 0;
-		state->bvd2   = 0;
-		state->vs_3v  = 0;
-		state->vs_Xv  = 0;
-		break;
-
-#endif
-	}
-}
-
-static int trizeps_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	int ret = 0;
-	unsigned short power = 0;
-
-	/* we do nothing here just check a bit */
-	switch (state->Vcc) {
-	case 0:  power &= 0xfc; break;
-	case 33: power |= ConXS_BCR_S0_VCC_3V3; break;
-	case 50:
-		pr_err("%s(): Vcc 5V not supported in socket\n", __func__);
-		break;
-	default:
-		pr_err("%s(): bad Vcc %u\n", __func__, state->Vcc);
-		ret = -1;
-	}
-
-	switch (state->Vpp) {
-	case 0:  power &= 0xf3; break;
-	case 33: power |= ConXS_BCR_S0_VPP_3V3; break;
-	case 120:
-		pr_err("%s(): Vpp 12V not supported in socket\n", __func__);
-		break;
-	default:
-		if (state->Vpp != state->Vcc) {
-			pr_err("%s(): bad Vpp %u\n", __func__, state->Vpp);
-			ret = -1;
-		}
-	}
-
-	switch (skt->nr) {
-	case 0:			 /* we only have 3.3V */
-		board_pcmcia_power(power);
-		break;
-
-#ifndef CONFIG_MACH_TRIZEPS_CONXS
-	/* on ConXS we only have one slot. Second is inactive */
-	case 1:
-#endif
-	default:
-		break;
-	}
-
-	return ret;
-}
-
-static void trizeps_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
-{
-	/* default is on */
-	board_pcmcia_power(0x9);
-}
-
-static void trizeps_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
-{
-	board_pcmcia_power(0x0);
-}
-
-static struct pcmcia_low_level trizeps_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-	.hw_init		= trizeps_pcmcia_hw_init,
-	.socket_state		= trizeps_pcmcia_socket_state,
-	.configure_socket	= trizeps_pcmcia_configure_socket,
-	.socket_init		= trizeps_pcmcia_socket_init,
-	.socket_suspend		= trizeps_pcmcia_socket_suspend,
-#ifdef CONFIG_MACH_TRIZEPS_CONXS
-	.nr			= 1,
-#else
-	.nr			= 2,
-#endif
-	.first			= 0,
-};
-
-static struct platform_device *trizeps_pcmcia_device;
-
-static int __init trizeps_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_trizeps4() && !machine_is_trizeps4wl())
-		return -ENODEV;
-
-	trizeps_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!trizeps_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(trizeps_pcmcia_device,
-			&trizeps_pcmcia_ops, sizeof(trizeps_pcmcia_ops));
-
-	if (ret == 0)
-		ret = platform_device_add(trizeps_pcmcia_device);
-
-	if (ret)
-		platform_device_put(trizeps_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit trizeps_pcmcia_exit(void)
-{
-	platform_device_unregister(trizeps_pcmcia_device);
-}
-
-fs_initcall(trizeps_pcmcia_init);
-module_exit(trizeps_pcmcia_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Juergen Schindele");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
deleted file mode 100644
index 716cce885379..000000000000
--- a/arch/arm/mach-pxa/trizeps4.c
+++ /dev/null
@@ -1,575 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/trizeps4.c
- *
- *  Support for the Keith und Koep Trizeps4 Module Platform.
- *
- *  Author:	Jürgen Schindele
- *  Created:	20 02, 2006
- *  Copyright:	Jürgen Schindele
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/export.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/dm9000.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/regulator/machine.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include "pxa27x.h"
-#include "trizeps4.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include "smemc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/*	comment out the following line if you want to use the
- *	Standard UART from PXA for serial / irda transmission
- *	and acivate it if you have status leds connected */
-#define STATUS_LEDS_ON_STUART_PINS 1
-
-/*****************************************************************************
- * MultiFunctionPins of CPU
- *****************************************************************************/
-static unsigned long trizeps4_pin_config[] __initdata = {
-	/* Chip Selects */
-	GPIO15_nCS_1,		/* DiskOnChip CS */
-	GPIO93_GPIO,		/* TRIZEPS4_DOC_IRQ */
-	GPIO94_GPIO,		/* DOC lock */
-
-	GPIO78_nCS_2,		/* DM9000 CS */
-	GPIO101_GPIO,		/* TRIZEPS4_ETH_IRQ */
-
-	GPIO79_nCS_3,		/* Logic CS */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,	/* Logic irq */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* LCD - 16bpp Active TFT */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* UART */
-	GPIO9_FFUART_CTS,
-	GPIO10_FFUART_DCD,
-	GPIO16_FFUART_TXD,
-	GPIO33_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO82_FFUART_DTR,
-	GPIO83_FFUART_RTS,
-	GPIO96_FFUART_RXD,
-
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-#ifdef STATUS_LEDS_ON_STUART_PINS
-	GPIO46_GPIO,
-	GPIO47_GPIO,
-#else
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-#endif
-	/* PCMCIA */
-	GPIO11_GPIO,			/* TRIZEPS4_CD_IRQ */
-	GPIO13_GPIO,			/* TRIZEPS4_READY_NINT */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO102_nPCE_1,
-	GPIO104_PSKTSEL,
-
-	/* MultiMediaCard */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO12_GPIO,			/* TRIZEPS4_MMC_IRQ */
-
-	/* USB OHCI */
-	GPIO88_USBH1_PWR,		/* USBHPWR1 */
-	GPIO89_USBH1_PEN,		/* USBHPEN1 */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-};
-
-static unsigned long trizeps4wl_pin_config[] __initdata = {
-	/* SSP 2 */
-	GPIO14_SSP2_SFRM,
-	GPIO19_SSP2_SCLK,
-	GPIO53_GPIO,			/* TRIZEPS4_SPI_IRQ */
-	GPIO86_SSP2_RXD,
-	GPIO87_SSP2_TXD,
-};
-
-/****************************************************************************
- * ONBOARD FLASH
- ****************************************************************************/
-static struct mtd_partition trizeps4_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.offset =	0x00000000,
-		.size =		0x00040000,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	}, {
-		.name =		"Backup",
-		.offset =	0x00040000,
-		.size =		0x00040000,
-	}, {
-		.name =		"Image",
-		.offset =	0x00080000,
-		.size =		0x01080000,
-	}, {
-		.name =		"IPSM",
-		.offset =	0x01100000,
-		.size =		0x00e00000,
-	}, {
-		.name =		"Registry",
-		.offset =	0x01f00000,
-		.size =		MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data trizeps4_flash_data[] = {
-	{
-		.width		= 4,			/* bankwidth in bytes */
-		.parts		= trizeps4_partitions,
-		.nr_parts	= ARRAY_SIZE(trizeps4_partitions)
-	}
-};
-
-static struct resource flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data = trizeps4_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-/****************************************************************************
- * DAVICOM DM9000 Ethernet
- ****************************************************************************/
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= TRIZEPS4_ETH_PHYS+0x300,
-		.end	= TRIZEPS4_ETH_PHYS+0x400-1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= TRIZEPS4_ETH_PHYS+0x8300,
-		.end	= TRIZEPS4_ETH_PHYS+0x8400-1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= TRIZEPS4_ETH_IRQ,
-		.end	= TRIZEPS4_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct dm9000_plat_data tri_dm9000_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY,
-};
-
-static struct platform_device dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.dev		= {
-		.platform_data = &tri_dm9000_platdata,
-	}
-};
-
-/****************************************************************************
- * LED's on GPIO pins of PXA
- ****************************************************************************/
-static struct gpio_led trizeps4_led[] = {
-#ifdef STATUS_LEDS_ON_STUART_PINS
-	{
-		.name = "led0:orange:heartbeat",	/* */
-		.default_trigger = "heartbeat",
-		.gpio = GPIO_HEARTBEAT_LED,
-		.active_low = 1,
-	},
-	{
-		.name = "led1:yellow:cpubusy",		/* */
-		.default_trigger = "cpu-busy",
-		.gpio = GPIO_SYS_BUSY_LED,
-		.active_low = 1,
-	},
-#endif
-};
-
-static struct gpio_led_platform_data trizeps4_led_data = {
-	.leds		= trizeps4_led,
-	.num_leds	= ARRAY_SIZE(trizeps4_led),
-};
-
-static struct platform_device leds_devices = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &trizeps4_led_data,
-	},
-};
-
-static struct platform_device *trizeps4_devices[] __initdata = {
-	&flash_device,
-	&dm9000_device,
-	&leds_devices,
-};
-
-static struct platform_device *trizeps4wl_devices[] __initdata = {
-	&flash_device,
-	&leds_devices,
-};
-
-static short trizeps_conxs_bcr;
-
-/* PCCARD power switching supports only 3,3V */
-void board_pcmcia_power(int power)
-{
-	if (power) {
-		/* switch power on, put in reset and enable buffers */
-		trizeps_conxs_bcr |= power;
-		trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
-		trizeps_conxs_bcr &= ~ConXS_BCR_CF_BUF_EN;
-		BCR_writew(trizeps_conxs_bcr);
-		/* wait a little */
-		udelay(2000);
-		/* take reset away */
-		trizeps_conxs_bcr &= ~ConXS_BCR_CF_RESET;
-		BCR_writew(trizeps_conxs_bcr);
-		udelay(2000);
-	} else {
-		/* put in reset */
-		trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
-		BCR_writew(trizeps_conxs_bcr);
-		udelay(1000);
-		/* switch power off */
-		trizeps_conxs_bcr &= ~0xf;
-		BCR_writew(trizeps_conxs_bcr);
-	}
-	pr_debug("%s: o%s 0x%x\n", __func__, power ? "n" : "ff",
-			trizeps_conxs_bcr);
-}
-EXPORT_SYMBOL(board_pcmcia_power);
-
-/* backlight power switching for LCD panel */
-static void board_backlight_power(int on)
-{
-	if (on)
-		trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
-	else
-		trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
-
-	pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff",
-			trizeps_conxs_bcr);
-	BCR_writew(trizeps_conxs_bcr);
-}
-
-/* a I2C based RTC is known on CONXS board */
-static struct i2c_board_info trizeps4_i2c_devices[] __initdata = {
-	{ I2C_BOARD_INFO("rtc-pcf8593", 0x51) }
-};
-
-/****************************************************************************
- * MMC card slot external to module
- ****************************************************************************/
-static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int,
-		void *data)
-{
-	int err;
-
-	err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
-			  IRQF_TRIGGER_RISING, "MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request"
-						"MMC card detect IRQ\n");
-		return -1;
-	}
-	return 0;
-}
-
-static void trizeps4_mci_exit(struct device *dev, void *data)
-{
-	free_irq(TRIZEPS4_MMC_IRQ, data);
-}
-
-static struct pxamci_platform_data trizeps4_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay_ms= 10,
-	.init 		= trizeps4_mci_init,
-	.exit		= trizeps4_mci_exit,
-	.get_ro		= NULL,	/* write-protection not supported */
-	.setpower 	= NULL,	/* power-switching not supported */
-};
-
-/****************************************************************************
- * IRDA mode switching on stuart
- ****************************************************************************/
-#ifndef STATUS_LEDS_ON_STUART_PINS
-static short trizeps_conxs_ircr;
-
-static int trizeps4_irda_startup(struct device *dev)
-{
-	trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
-	IRCR_writew(trizeps_conxs_ircr);
-	return 0;
-}
-
-static void trizeps4_irda_shutdown(struct device *dev)
-{
-	trizeps_conxs_ircr |= ConXS_IRCR_SD;
-	IRCR_writew(trizeps_conxs_ircr);
-}
-
-static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	/* Switch mode */
-	if (mode & IR_SIRMODE)
-		trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;	/* Slow mode */
-	else if (mode & IR_FIRMODE)
-		trizeps_conxs_ircr |= ConXS_IRCR_MODE;	/* Fast mode */
-
-	/* Switch power */
-	if (mode & IR_OFF)
-		trizeps_conxs_ircr |= ConXS_IRCR_SD;
-	else
-		trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
-
-	IRCR_writew(trizeps_conxs_ircr);
-	local_irq_restore(flags);
-
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= trizeps4_irda_transceiver_mode,
-	.startup		= trizeps4_irda_startup,
-	.shutdown		= trizeps4_irda_shutdown,
-};
-#endif
-
-/****************************************************************************
- * OHCI USB port
- ****************************************************************************/
-static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static struct map_desc trizeps4_io_desc[] __initdata = {
-	{ 	/* ConXS CFSR */
-		.virtual	= TRIZEPS4_CFSR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_CFSR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	},
-	{	/* ConXS BCR */
-		.virtual	= TRIZEPS4_BOCR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_BOCR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	},
-	{ 	/* ConXS IRCR */
-		.virtual	= TRIZEPS4_IRCR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_IRCR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	},
-	{	/* ConXS DCR */
-		.virtual	= TRIZEPS4_DICR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_DICR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	},
-	{	/* ConXS UPSR */
-		.virtual	= TRIZEPS4_UPSR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_UPSR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	}
-};
-
-static struct pxafb_mode_info sharp_lcd_mode = {
-	.pixclock	= 78000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 8,
-	.hsync_len	= 4,
-	.left_margin	= 4,
-	.right_margin	= 4,
-	.vsync_len	= 2,
-	.upper_margin	= 0,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info sharp_lcd = {
-	.modes		= &sharp_lcd_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.pxafb_backlight_power = board_backlight_power,
-};
-
-static struct pxafb_mode_info toshiba_lcd_mode = {
-	.pixclock	= 39720,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 8,
-	.hsync_len	= 63,
-	.left_margin	= 12,
-	.right_margin	= 12,
-	.vsync_len	= 4,
-	.upper_margin	= 32,
-	.lower_margin	= 10,
-	.sync		= 0,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info toshiba_lcd = {
-	.modes		= &toshiba_lcd_mode,
-	.num_modes	= 1,
-	.lcd_conn	= (LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.pxafb_backlight_power = board_backlight_power,
-};
-
-static void __init trizeps4_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4_pin_config));
-	if (machine_is_trizeps4wl()) {
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4wl_pin_config));
-		platform_add_devices(trizeps4wl_devices,
-					ARRAY_SIZE(trizeps4wl_devices));
-	} else {
-		platform_add_devices(trizeps4_devices,
-					ARRAY_SIZE(trizeps4_devices));
-	}
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	if (0)	/* dont know how to determine LCD */
-		pxa_set_fb_info(NULL, &sharp_lcd);
-	else
-		pxa_set_fb_info(NULL, &toshiba_lcd);
-
-	pxa_set_mci_info(&trizeps4_mci_platform_data);
-#ifndef STATUS_LEDS_ON_STUART_PINS
-	pxa_set_ficp_info(&trizeps4_ficp_platform_data);
-#endif
-	pxa_set_ohci_info(&trizeps4_ohci_platform_data);
-	pxa_set_ac97_info(NULL);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, trizeps4_i2c_devices,
-					ARRAY_SIZE(trizeps4_i2c_devices));
-
-	/* this is the reset value */
-	trizeps_conxs_bcr = 0x00A0;
-
-	BCR_writew(trizeps_conxs_bcr);
-	board_backlight_power(1);
-
-	regulator_has_full_constraints();
-}
-
-static void __init trizeps4_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
-
-	if ((__raw_readl(MSC0) & 0x8) && (__raw_readl(BOOT_DEF) & 0x1)) {
-		/* if flash is 16 bit wide its a Trizeps4 WL */
-		__machine_arch_type = MACH_TYPE_TRIZEPS4WL;
-		trizeps4_flash_data[0].width = 2;
-	} else {
-		/* if flash is 32 bit wide its a Trizeps4 */
-		__machine_arch_type = MACH_TYPE_TRIZEPS4;
-		trizeps4_flash_data[0].width = 4;
-	}
-}
-
-MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
-	/* MAINTAINER("Jürgen Schindele") */
-	.atag_offset	= 0x100,
-	.init_machine	= trizeps4_init,
-	.map_io		= trizeps4_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
-MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
-	/* MAINTAINER("Jürgen Schindele") */
-	.atag_offset	= 0x100,
-	.init_machine	= trizeps4_init,
-	.map_io		= trizeps4_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/trizeps4.h b/arch/arm/mach-pxa/trizeps4.h
deleted file mode 100644
index b6c19d155ef9..000000000000
--- a/arch/arm/mach-pxa/trizeps4.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/************************************************************************
- * Include file for TRIZEPS4 SoM and ConXS eval-board
- * Copyright (c) Jürgen Schindele
- * 2006
- ************************************************************************/
-
-/*
- * Includes/Defines
- */
-#ifndef _TRIPEPS4_H_
-#define _TRIPEPS4_H_
-
-#include "addr-map.h"
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/* physical memory regions */
-#define TRIZEPS4_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
-#define TRIZEPS4_DISK_PHYS	(PXA_CS1_PHYS)  /* Disk On Chip region */
-#define TRIZEPS4_ETH_PHYS	(PXA_CS2_PHYS)  /* Ethernet DM9000 region */
-#define TRIZEPS4_PIC_PHYS	(PXA_CS3_PHYS)	/* Logic chip on ConXS-Board */
-#define TRIZEPS4_SDRAM_BASE	0xa0000000      /* SDRAM region */
-
-				/* Logic on ConXS-board CSFR register*/
-#define TRIZEPS4_CFSR_PHYS	(PXA_CS3_PHYS)
-				/* Logic on ConXS-board BOCR register*/
-#define TRIZEPS4_BOCR_PHYS	(PXA_CS3_PHYS+0x02000000)
-				/* Logic on ConXS-board IRCR register*/
-#define TRIZEPS4_IRCR_PHYS	(PXA_CS3_PHYS+0x02400000)
-				/* Logic on ConXS-board UPSR register*/
-#define TRIZEPS4_UPSR_PHYS	(PXA_CS3_PHYS+0x02800000)
-				/* Logic on ConXS-board DICR register*/
-#define TRIZEPS4_DICR_PHYS	(PXA_CS3_PHYS+0x03800000)
-
-/* virtual memory regions */
-#define TRIZEPS4_DISK_VIRT	0xF0000000	/* Disk On Chip region */
-
-#define TRIZEPS4_PIC_VIRT	0xF0100000	/* not used */
-#define TRIZEPS4_CFSR_VIRT	0xF0100000
-#define TRIZEPS4_BOCR_VIRT	0xF0200000
-#define TRIZEPS4_DICR_VIRT	0xF0300000
-#define TRIZEPS4_IRCR_VIRT	0xF0400000
-#define TRIZEPS4_UPSR_VIRT	0xF0500000
-
-/* size of flash */
-#define TRIZEPS4_FLASH_SIZE	0x02000000	/* Flash size 32 MB */
-
-/* Ethernet Controller Davicom DM9000 */
-#define GPIO_DM9000		101
-#define TRIZEPS4_ETH_IRQ	PXA_GPIO_TO_IRQ(GPIO_DM9000)
-
-/* UCB1400 audio / TS-controller */
-#define GPIO_UCB1400		1
-#define TRIZEPS4_UCB1400_IRQ	PXA_GPIO_TO_IRQ(GPIO_UCB1400)
-
-/* PCMCIA socket Compact Flash */
-#define GPIO_PCD		11		/* PCMCIA Card Detect */
-#define TRIZEPS4_CD_IRQ		PXA_GPIO_TO_IRQ(GPIO_PCD)
-#define GPIO_PRDY		13		/* READY / nINT */
-#define TRIZEPS4_READY_NINT	PXA_GPIO_TO_IRQ(GPIO_PRDY)
-
-/* MMC socket */
-#define GPIO_MMC_DET		12
-#define TRIZEPS4_MMC_IRQ	PXA_GPIO_TO_IRQ(GPIO_MMC_DET)
-
-/* DOC NAND chip */
-#define GPIO_DOC_LOCK           94
-#define GPIO_DOC_IRQ            93
-#define TRIZEPS4_DOC_IRQ        PXA_GPIO_TO_IRQ(GPIO_DOC_IRQ)
-
-/* SPI interface */
-#define GPIO_SPI                53
-#define TRIZEPS4_SPI_IRQ        PXA_GPIO_TO_IRQ(GPIO_SPI)
-
-/* LEDS using tx2 / rx2 */
-#define GPIO_SYS_BUSY_LED	46
-#define GPIO_HEARTBEAT_LED	47
-
-/* Off-module PIC on ConXS board */
-#define GPIO_PIC		0
-#define TRIZEPS4_PIC_IRQ	PXA_GPIO_TO_IRQ(GPIO_PIC)
-
-#ifdef CONFIG_MACH_TRIZEPS_CONXS
-/* for CONXS base board define these registers */
-#define CFSR_P2V(x)	((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
-#define CFSR_V2P(x)	((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
-
-#define BCR_P2V(x)	((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
-#define BCR_V2P(x)	((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
-
-#define DCR_P2V(x)	((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
-#define DCR_V2P(x)	((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
-
-#define IRCR_P2V(x)	((x) - TRIZEPS4_IRCR_PHYS + TRIZEPS4_IRCR_VIRT)
-#define IRCR_V2P(x)	((x) - TRIZEPS4_IRCR_VIRT + TRIZEPS4_IRCR_PHYS)
-
-#ifndef __ASSEMBLY__
-static inline unsigned short CFSR_readw(void)
-{
-	/* [Compact Flash Status Register] is read only */
-	return *((unsigned short *)CFSR_P2V(0x0C000000));
-}
-static inline void BCR_writew(unsigned short value)
-{
-	/* [Board Control Regsiter] is write only */
-	*((unsigned short *)BCR_P2V(0x0E000000)) = value;
-}
-static inline void DCR_writew(unsigned short value)
-{
-	/* [Display Control Register] is write only */
-	*((unsigned short *)DCR_P2V(0x0E000000)) = value;
-}
-static inline void IRCR_writew(unsigned short value)
-{
-	/* [InfraRed data Control Register] is write only */
-	*((unsigned short *)IRCR_P2V(0x0E000000)) = value;
-}
-#else
-#define ConXS_CFSR		CFSR_P2V(0x0C000000)
-#define ConXS_BCR		BCR_P2V(0x0E000000)
-#define ConXS_DCR		DCR_P2V(0x0F800000)
-#define ConXS_IRCR		IRCR_P2V(0x0F800000)
-#endif
-#else
-/* for whatever baseboard define function registers */
-static inline unsigned short CFSR_readw(void)
-{
-	return 0;
-}
-static inline void BCR_writew(unsigned short value)
-{
-	;
-}
-static inline void DCR_writew(unsigned short value)
-{
-	;
-}
-static inline void IRCR_writew(unsigned short value)
-{
-	;
-}
-#endif	/* CONFIG_MACH_TRIZEPS_CONXS */
-
-#define ConXS_CFSR_BVD_MASK	0x0003
-#define ConXS_CFSR_BVD1		(1 << 0)
-#define ConXS_CFSR_BVD2		(1 << 1)
-#define ConXS_CFSR_VS_MASK	0x000C
-#define ConXS_CFSR_VS1		(1 << 2)
-#define ConXS_CFSR_VS2		(1 << 3)
-#define ConXS_CFSR_VS_5V	(0x3 << 2)
-#define ConXS_CFSR_VS_3V3	0x0
-
-#define ConXS_BCR_S0_POW_EN0	(1 << 0)
-#define ConXS_BCR_S0_POW_EN1	(1 << 1)
-#define ConXS_BCR_L_DISP	(1 << 4)
-#define ConXS_BCR_CF_BUF_EN	(1 << 5)
-#define ConXS_BCR_CF_RESET	(1 << 7)
-#define ConXS_BCR_S0_VCC_3V3	0x1
-#define ConXS_BCR_S0_VCC_5V0	0x2
-#define ConXS_BCR_S0_VPP_12V	0x4
-#define ConXS_BCR_S0_VPP_3V3	0x8
-
-#define ConXS_IRCR_MODE		(1 << 0)
-#define ConXS_IRCR_SD		(1 << 1)
-
-#endif /* _TRIPEPS4_H_ */
diff --git a/arch/arm/mach-pxa/viper-pcmcia.c b/arch/arm/mach-pxa/viper-pcmcia.c
deleted file mode 100644
index 26599dcc49b3..000000000000
--- a/arch/arm/mach-pxa/viper-pcmcia.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Viper/Zeus PCMCIA support
- *   Copyright 2004 Arcom Control Systems
- *
- * Maintained by Marc Zyngier <maz@misterjones.org>
- *
- * Based on:
- *   iPAQ h2200 PCMCIA support
- *   Copyright 2004 Koen Kooi <koen@vestingbar.nl>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <pcmcia/ss.h>
-#include <pcmcia/soc_common.h>
-
-#include <asm/irq.h>
-
-#include "viper-pcmcia.h"
-
-static struct platform_device *arcom_pcmcia_dev;
-
-static inline struct arcom_pcmcia_pdata *viper_get_pdata(void)
-{
-	return arcom_pcmcia_dev->dev.platform_data;
-}
-
-static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
-	unsigned long flags;
-
-	skt->stat[SOC_STAT_CD].gpio = pdata->cd_gpio;
-	skt->stat[SOC_STAT_CD].name = "PCMCIA_CD";
-	skt->stat[SOC_STAT_RDY].gpio = pdata->rdy_gpio;
-	skt->stat[SOC_STAT_RDY].name = "CF ready";
-
-	if (gpio_request(pdata->pwr_gpio, "CF power"))
-		goto err_request_pwr;
-
-	local_irq_save(flags);
-
-	if (gpio_direction_output(pdata->pwr_gpio, 0)) {
-		local_irq_restore(flags);
-		goto err_dir;
-	}
-
-	local_irq_restore(flags);
-
-	return 0;
-
-err_dir:
-	gpio_free(pdata->pwr_gpio);
-err_request_pwr:
-	dev_err(&arcom_pcmcia_dev->dev, "Failed to setup PCMCIA GPIOs\n");
-	return -1;
-}
-
-/*
- * Release all resources.
- */
-static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
-
-	gpio_free(pdata->pwr_gpio);
-}
-
-static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-				      struct pcmcia_state *state)
-{
-	state->vs_3v  = 1; /* Can only apply 3.3V */
-	state->vs_Xv  = 0;
-}
-
-static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-					 const socket_state_t *state)
-{
-	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
-
-	/* Silently ignore Vpp, output enable, speaker enable. */
-	pdata->reset(state->flags & SS_RESET);
-
-	/* Apply socket voltage */
-	switch (state->Vcc) {
-	case 0:
-		gpio_set_value(pdata->pwr_gpio, 0);
-		break;
-	case 33:
-		gpio_set_value(pdata->pwr_gpio, 1);
-		break;
-	default:
-		dev_err(&arcom_pcmcia_dev->dev, "Unsupported Vcc:%d\n", state->Vcc);
-		return -1;
-	}
-
-	return 0;
-}
-
-static struct pcmcia_low_level viper_pcmcia_ops = {
-	.owner          	= THIS_MODULE,
-	.hw_init        	= viper_pcmcia_hw_init,
-	.hw_shutdown		= viper_pcmcia_hw_shutdown,
-	.socket_state		= viper_pcmcia_socket_state,
-	.configure_socket	= viper_pcmcia_configure_socket,
-	.nr         		= 1,
-};
-
-static struct platform_device *viper_pcmcia_device;
-
-static int viper_pcmcia_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	/* I can't imagine more than one device, but you never know... */
-	if (arcom_pcmcia_dev)
-		return -EEXIST;
-
-	if (!pdev->dev.platform_data)
-		return -EINVAL;
-
-	viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!viper_pcmcia_device)
-		return -ENOMEM;
-
-	arcom_pcmcia_dev = pdev;
-
-	viper_pcmcia_device->dev.parent = &pdev->dev;
-
-	ret = platform_device_add_data(viper_pcmcia_device,
-				       &viper_pcmcia_ops,
-				       sizeof(viper_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(viper_pcmcia_device);
-
-	if (ret) {
-		platform_device_put(viper_pcmcia_device);
-		arcom_pcmcia_dev = NULL;
-	}
-
-	return ret;
-}
-
-static int viper_pcmcia_remove(struct platform_device *pdev)
-{
-	platform_device_unregister(viper_pcmcia_device);
-	arcom_pcmcia_dev = NULL;
-	return 0;
-}
-
-static struct platform_device_id viper_pcmcia_id_table[] = {
-	{ .name = "viper-pcmcia", },
-	{ .name = "zeus-pcmcia",  },
-	{ },
-};
-
-static struct platform_driver viper_pcmcia_driver = {
-	.probe		= viper_pcmcia_probe,
-	.remove		= viper_pcmcia_remove,
-	.driver		= {
-		.name	= "arcom-pcmcia",
-	},
-	.id_table	= viper_pcmcia_id_table,
-};
-
-module_platform_driver(viper_pcmcia_driver);
-
-MODULE_DEVICE_TABLE(platform, viper_pcmcia_id_table);
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/viper-pcmcia.h b/arch/arm/mach-pxa/viper-pcmcia.h
deleted file mode 100644
index a23b58aff9e1..000000000000
--- a/arch/arm/mach-pxa/viper-pcmcia.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ARCOM_PCMCIA_H
-#define __ARCOM_PCMCIA_H
-
-struct arcom_pcmcia_pdata {
-	int	cd_gpio;
-	int	rdy_gpio;
-	int	pwr_gpio;
-	void	(*reset)(int state);
-};
-
-#endif
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
deleted file mode 100644
index 5b43351ee840..000000000000
--- a/arch/arm/mach-pxa/viper.c
+++ /dev/null
@@ -1,1034 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/viper.c
- *
- *  Support for the Arcom VIPER SBC.
- *
- *  Author:	Ian Campbell
- *  Created:    Feb 03, 2003
- *  Copyright:  Arcom Control Systems
- *
- *  Maintained by Marc Zyngier <maz@misterjones.org>
- *                             <marc.zyngier@altran.com>
- *
- * Based on lubbock.c:
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- */
-
-#include <linux/types.h>
-#include <linux/memory.h>
-#include <linux/cpu.h>
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/module.h>
-#include <linux/pm.h>
-#include <linux/sched.h>
-#include <linux/gpio.h>
-#include <linux/jiffies.h>
-#include <linux/platform_data/i2c-gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/serial_8250.h>
-#include <linux/smc91x.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/usb/isp116x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/syscore_ops.h>
-
-#include "pxa25x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/video-pxafb.h>
-#include "regs-uart.h"
-#include "viper-pcmcia.h"
-#include "viper.h"
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-#include <asm/system_info.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned int icr;
-
-static void viper_icr_set_bit(unsigned int bit)
-{
-	icr |= bit;
-	VIPER_ICR = icr;
-}
-
-static void viper_icr_clear_bit(unsigned int bit)
-{
-	icr &= ~bit;
-	VIPER_ICR = icr;
-}
-
-/* This function is used from the pcmcia module to reset the CF */
-static void viper_cf_reset(int state)
-{
-	if (state)
-		viper_icr_set_bit(VIPER_ICR_CF_RST);
-	else
-		viper_icr_clear_bit(VIPER_ICR_CF_RST);
-}
-
-static struct arcom_pcmcia_pdata viper_pcmcia_info = {
-	.cd_gpio	= VIPER_CF_CD_GPIO,
-	.rdy_gpio	= VIPER_CF_RDY_GPIO,
-	.pwr_gpio	= VIPER_CF_POWER_GPIO,
-	.reset		= viper_cf_reset,
-};
-
-static struct platform_device viper_pcmcia_device = {
-	.name		= "viper-pcmcia",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &viper_pcmcia_info,
-	},
-};
-
-/*
- * The CPLD version register was not present on VIPER boards prior to
- * v2i1. On v1 boards where the version register is not present we
- * will just read back the previous value from the databus.
- *
- * Therefore we do two reads. The first time we write 0 to the
- * (read-only) register before reading and the second time we write
- * 0xff first. If the two reads do not match or they read back as 0xff
- * or 0x00 then we have version 1 hardware.
- */
-static u8 viper_hw_version(void)
-{
-	u8 v1, v2;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	VIPER_VERSION = 0;
-	v1 = VIPER_VERSION;
-	VIPER_VERSION = 0xff;
-	v2 = VIPER_VERSION;
-
-	v1 = (v1 != v2 || v1 == 0xff) ? 0 : v1;
-
-	local_irq_restore(flags);
-	return v1;
-}
-
-/* CPU system core operations. */
-static int viper_cpu_suspend(void)
-{
-	viper_icr_set_bit(VIPER_ICR_R_DIS);
-	return 0;
-}
-
-static void viper_cpu_resume(void)
-{
-	viper_icr_clear_bit(VIPER_ICR_R_DIS);
-}
-
-static struct syscore_ops viper_cpu_syscore_ops = {
-	.suspend	= viper_cpu_suspend,
-	.resume		= viper_cpu_resume,
-};
-
-static unsigned int current_voltage_divisor;
-
-/*
- * If force is not true then step from existing to new divisor. If
- * force is true then jump straight to the new divisor. Stepping is
- * used because if the jump in voltage is too large, the VCC can dip
- * too low and the regulator cuts out.
- *
- * force can be used to initialize the divisor to a know state by
- * setting the value for the current clock speed, since we are already
- * running at that speed we know the voltage should be pretty close so
- * the jump won't be too large
- */
-static void viper_set_core_cpu_voltage(unsigned long khz, int force)
-{
-	int i = 0;
-	unsigned int divisor = 0;
-	const char *v;
-
-	if (khz < 200000) {
-		v = "1.0"; divisor = 0xfff;
-	} else if (khz < 300000) {
-		v = "1.1"; divisor = 0xde5;
-	} else {
-		v = "1.3"; divisor = 0x325;
-	}
-
-	pr_debug("viper: setting CPU core voltage to %sV at %d.%03dMHz\n",
-		 v, (int)khz / 1000, (int)khz % 1000);
-
-#define STEP 0x100
-	do {
-		int step;
-
-		if (force)
-			step = divisor;
-		else if (current_voltage_divisor < divisor - STEP)
-			step = current_voltage_divisor + STEP;
-		else if (current_voltage_divisor > divisor + STEP)
-			step = current_voltage_divisor - STEP;
-		else
-			step = divisor;
-		force = 0;
-
-		gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
-		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
-
-		for (i = 1 << 11 ; i > 0 ; i >>= 1) {
-			udelay(1);
-
-			gpio_set_value(VIPER_PSU_DATA_GPIO, step & i);
-			udelay(1);
-
-			gpio_set_value(VIPER_PSU_CLK_GPIO, 1);
-			udelay(1);
-
-			gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
-		}
-		udelay(1);
-
-		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 1);
-		udelay(1);
-
-		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
-
-		current_voltage_divisor = step;
-	} while (current_voltage_divisor != divisor);
-}
-
-/* Interrupt handling */
-static unsigned long viper_irq_enabled_mask;
-static const int viper_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, 9, 14, 15 };
-static const int viper_isa_irq_map[] = {
-	0,		/* ISA irq #0, invalid */
-	0,		/* ISA irq #1, invalid */
-	0,		/* ISA irq #2, invalid */
-	1 << 0,		/* ISA irq #3 */
-	1 << 1,		/* ISA irq #4 */
-	1 << 2,		/* ISA irq #5 */
-	1 << 3,		/* ISA irq #6 */
-	1 << 4,		/* ISA irq #7 */
-	0,		/* ISA irq #8, invalid */
-	1 << 8,		/* ISA irq #9 */
-	1 << 5,		/* ISA irq #10 */
-	1 << 6,		/* ISA irq #11 */
-	1 << 7,		/* ISA irq #12 */
-	0,		/* ISA irq #13, invalid */
-	1 << 9,		/* ISA irq #14 */
-	1 << 10,	/* ISA irq #15 */
-};
-
-static inline int viper_irq_to_bitmask(unsigned int irq)
-{
-	return viper_isa_irq_map[irq - PXA_ISA_IRQ(0)];
-}
-
-static inline int viper_bit_to_irq(int bit)
-{
-	return viper_isa_irqs[bit] + PXA_ISA_IRQ(0);
-}
-
-static void viper_ack_irq(struct irq_data *d)
-{
-	int viper_irq = viper_irq_to_bitmask(d->irq);
-
-	if (viper_irq & 0xff)
-		VIPER_LO_IRQ_STATUS = viper_irq;
-	else
-		VIPER_HI_IRQ_STATUS = (viper_irq >> 8);
-}
-
-static void viper_mask_irq(struct irq_data *d)
-{
-	viper_irq_enabled_mask &= ~(viper_irq_to_bitmask(d->irq));
-}
-
-static void viper_unmask_irq(struct irq_data *d)
-{
-	viper_irq_enabled_mask |= viper_irq_to_bitmask(d->irq);
-}
-
-static inline unsigned long viper_irq_pending(void)
-{
-	return (VIPER_HI_IRQ_STATUS << 8 | VIPER_LO_IRQ_STATUS) &
-			viper_irq_enabled_mask;
-}
-
-static void viper_irq_handler(struct irq_desc *desc)
-{
-	unsigned int irq;
-	unsigned long pending;
-
-	pending = viper_irq_pending();
-	do {
-		/* we're in a chained irq handler,
-		 * so ack the interrupt by hand */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-		if (likely(pending)) {
-			irq = viper_bit_to_irq(__ffs(pending));
-			generic_handle_irq(irq);
-		}
-		pending = viper_irq_pending();
-	} while (pending);
-}
-
-static struct irq_chip viper_irq_chip = {
-	.name		= "ISA",
-	.irq_ack	= viper_ack_irq,
-	.irq_mask	= viper_mask_irq,
-	.irq_unmask	= viper_unmask_irq
-};
-
-static void __init viper_init_irq(void)
-{
-	int level;
-	int isa_irq;
-
-	pxa25x_init_irq();
-
-	/* setup ISA IRQs */
-	for (level = 0; level < ARRAY_SIZE(viper_isa_irqs); level++) {
-		isa_irq = viper_bit_to_irq(level);
-		irq_set_chip_and_handler(isa_irq, &viper_irq_chip,
-					 handle_edge_irq);
-		irq_clear_status_flags(isa_irq, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
-
-	irq_set_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
-				viper_irq_handler);
-	irq_set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
-}
-
-/* Flat Panel */
-static struct pxafb_mode_info fb_mode_info[] = {
-	{
-		.pixclock	= 157500,
-
-		.xres		= 320,
-		.yres		= 240,
-
-		.bpp		= 16,
-
-		.hsync_len	= 63,
-		.left_margin	= 7,
-		.right_margin	= 13,
-
-		.vsync_len	= 20,
-		.upper_margin	= 0,
-		.lower_margin	= 0,
-
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info fb_info = {
-	.modes			= fb_mode_info,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static struct pwm_lookup viper_pwm_lookup[] = {
-	PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
-		   PWM_POLARITY_NORMAL),
-};
-
-static int viper_backlight_init(struct device *dev)
-{
-	int ret;
-
-	/* GPIO9 and 10 control FB backlight. Initialise to off */
-	ret = gpio_request(VIPER_BCKLIGHT_EN_GPIO, "Backlight");
-	if (ret)
-		goto err_request_bckl;
-
-	ret = gpio_request(VIPER_LCD_EN_GPIO, "LCD");
-	if (ret)
-		goto err_request_lcd;
-
-	ret = gpio_direction_output(VIPER_BCKLIGHT_EN_GPIO, 0);
-	if (ret)
-		goto err_dir;
-
-	ret = gpio_direction_output(VIPER_LCD_EN_GPIO, 0);
-	if (ret)
-		goto err_dir;
-
-	return 0;
-
-err_dir:
-	gpio_free(VIPER_LCD_EN_GPIO);
-err_request_lcd:
-	gpio_free(VIPER_BCKLIGHT_EN_GPIO);
-err_request_bckl:
-	dev_err(dev, "Failed to setup LCD GPIOs\n");
-
-	return ret;
-}
-
-static int viper_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
-	gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);
-
-	return brightness;
-}
-
-static void viper_backlight_exit(struct device *dev)
-{
-	gpio_free(VIPER_LCD_EN_GPIO);
-	gpio_free(VIPER_BCKLIGHT_EN_GPIO);
-}
-
-static struct platform_pwm_backlight_data viper_backlight_data = {
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-	.init		= viper_backlight_init,
-	.notify		= viper_backlight_notify,
-	.exit		= viper_backlight_exit,
-};
-
-static struct platform_device viper_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent		= &pxa25x_device_pwm0.dev,
-		.platform_data	= &viper_backlight_data,
-	},
-};
-
-/* Ethernet */
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start  = VIPER_ETH_PHYS + 0x300,
-		.end    = VIPER_ETH_PHYS + 0x30f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
-		.end    = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-	[2] = {
-		.name	= "smc91x-data32",
-		.start  = VIPER_ETH_DATA_PHYS,
-		.end    = VIPER_ETH_DATA_PHYS + 3,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct smc91x_platdata viper_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources  = ARRAY_SIZE(smc91x_resources),
-	.resource       = smc91x_resources,
-	.dev		= {
-		.platform_data	= &viper_smc91x_info,
-	},
-};
-
-/* i2c */
-static struct gpiod_lookup_table viper_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio.1",
-	.table		= {
-		GPIO_LOOKUP_IDX("gpio-pxa", VIPER_RTC_I2C_SDA_GPIO,
-				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP_IDX("gpio-pxa", VIPER_RTC_I2C_SCL_GPIO,
-				NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct i2c_gpio_platform_data i2c_bus_data = {
-	.udelay  = 10,
-	.timeout = HZ,
-};
-
-static struct platform_device i2c_bus_device = {
-	.name		= "i2c-gpio",
-	.id		= 1, /* pxa2xx-i2c is bus 0, so start at 1 */
-	.dev = {
-		.platform_data = &i2c_bus_data,
-	}
-};
-
-static struct i2c_board_info __initdata viper_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("ds1338", 0x68),
-	},
-};
-
-/*
- * Serial configuration:
- * You can either have the standard PXA ports driven by the PXA driver,
- * or all the ports (PXA + 16850) driven by the 8250 driver.
- * Choose your poison.
- */
-
-static struct resource viper_serial_resources[] = {
-#ifndef CONFIG_SERIAL_PXA
-	{
-		.start	= 0x40100000,
-		.end	= 0x4010001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40200000,
-		.end	= 0x4020001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40700000,
-		.end	= 0x4070001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= VIPER_UARTA_PHYS,
-		.end	= VIPER_UARTA_PHYS + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= VIPER_UARTB_PHYS,
-		.end	= VIPER_UARTB_PHYS + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-#else
-	{
-		0,
-	},
-#endif
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
-#ifndef CONFIG_SERIAL_PXA
-	/* Internal UARTs */
-	{
-		.membase	= (void *)&FFUART,
-		.mapbase	= __PREG(FFUART),
-		.irq		= IRQ_FFUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{
-		.membase	= (void *)&BTUART,
-		.mapbase	= __PREG(BTUART),
-		.irq		= IRQ_BTUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{
-		.membase	= (void *)&STUART,
-		.mapbase	= __PREG(STUART),
-		.irq		= IRQ_STUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	/* External UARTs */
-	{
-		.mapbase	= VIPER_UARTA_PHYS,
-		.irq		= PXA_GPIO_TO_IRQ(VIPER_UARTA_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 1843200,
-		.regshift	= 1,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP |
-				  UPF_SKIP_TEST,
-	},
-	{
-		.mapbase	= VIPER_UARTB_PHYS,
-		.irq		= PXA_GPIO_TO_IRQ(VIPER_UARTB_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 1843200,
-		.regshift	= 1,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP |
-				  UPF_SKIP_TEST,
-	},
-#endif
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-	.num_resources		= ARRAY_SIZE(viper_serial_resources),
-	.resource		= viper_serial_resources,
-};
-
-/* USB */
-static void isp116x_delay(struct device *dev, int delay)
-{
-	ndelay(delay);
-}
-
-static struct resource isp116x_resources[] = {
-	[0] = { /* DATA */
-		.start  = VIPER_USB_PHYS + 0,
-		.end    = VIPER_USB_PHYS + 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = { /* ADDR */
-		.start  = VIPER_USB_PHYS + 2,
-		.end    = VIPER_USB_PHYS + 3,
-		.flags  = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start  = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
-		.end    = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
-static struct isp116x_platform_data isp116x_platform_data = {
-	/* Enable internal resistors on downstream ports */
-	.sel15Kres		= 1,
-	/* On-chip overcurrent protection */
-	.oc_enable		= 1,
-	/* INT output polarity */
-	.int_act_high		= 1,
-	/* INT edge or level triggered */
-	.int_edge_triggered	= 0,
-
-	/* WAKEUP pin connected - NOT SUPPORTED  */
-	/* .remote_wakeup_connected = 0, */
-	/* Wakeup by devices on usb bus enabled */
-	.remote_wakeup_enable	= 0,
-	.delay			= isp116x_delay,
-};
-
-static struct platform_device isp116x_device = {
-	.name			= "isp116x-hcd",
-	.id			= -1,
-	.num_resources  	= ARRAY_SIZE(isp116x_resources),
-	.resource       	= isp116x_resources,
-	.dev			= {
-		.platform_data	= &isp116x_platform_data,
-	},
-
-};
-
-/* MTD */
-static struct resource mtd_resources[] = {
-	[0] = {	/* RedBoot config + filesystem flash */
-		.start	= VIPER_FLASH_PHYS,
-		.end	= VIPER_FLASH_PHYS + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {	/* Boot flash */
-		.start	= VIPER_BOOT_PHYS,
-		.end	= VIPER_BOOT_PHYS + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = { /*
-		 * SRAM size is actually 256KB, 8bits, with a sparse mapping
-		 * (each byte is on a 16bit boundary).
-		 */
-		.start	= _VIPER_SRAM_BASE,
-		.end	= _VIPER_SRAM_BASE + SZ_512K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition viper_boot_flash_partition = {
-	.name		= "RedBoot",
-	.size		= SZ_1M,
-	.offset		= 0,
-	.mask_flags	= MTD_WRITEABLE,	/* force R/O */
-};
-
-static struct physmap_flash_data viper_flash_data[] = {
-	[0] = {
-		.width		= 2,
-		.parts		= NULL,
-		.nr_parts	= 0,
-	},
-	[1] = {
-		.width		= 2,
-		.parts		= &viper_boot_flash_partition,
-		.nr_parts	= 1,
-	},
-};
-
-static struct platform_device viper_mtd_devices[] = {
-	[0] = {
-		.name		= "physmap-flash",
-		.id		= 0,
-		.dev		= {
-			.platform_data	= &viper_flash_data[0],
-		},
-		.resource	= &mtd_resources[0],
-		.num_resources	= 1,
-	},
-	[1] = {
-		.name		= "physmap-flash",
-		.id		= 1,
-		.dev		= {
-			.platform_data	= &viper_flash_data[1],
-		},
-		.resource	= &mtd_resources[1],
-		.num_resources	= 1,
-	},
-};
-
-static struct platform_device *viper_devs[] __initdata = {
-	&smc91x_device,
-	&i2c_bus_device,
-	&serial_device,
-	&isp116x_device,
-	&viper_mtd_devices[0],
-	&viper_mtd_devices[1],
-	&viper_backlight_device,
-	&viper_pcmcia_device,
-};
-
-static mfp_cfg_t viper_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* FP Backlight */
-	GPIO9_GPIO, 				/* VIPER_BCKLIGHT_EN_GPIO */
-	GPIO10_GPIO,				/* VIPER_LCD_EN_GPIO */
-	GPIO16_PWM0_OUT,
-
-	/* Ethernet PHY Ready */
-	GPIO18_RDY,
-
-	/* Serial shutdown */
-	GPIO12_GPIO | MFP_LPM_DRIVE_HIGH,	/* VIPER_UART_SHDN_GPIO */
-
-	/* Compact-Flash / PC104 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO8_GPIO,				/* VIPER_CF_RDY_GPIO */
-	GPIO32_GPIO,				/* VIPER_CF_CD_GPIO */
-	GPIO82_GPIO,				/* VIPER_CF_POWER_GPIO */
-
-	/* Integrated UPS control */
-	GPIO20_GPIO,				/* VIPER_UPS_GPIO */
-
-	/* Vcc regulator control */
-	GPIO6_GPIO,				/* VIPER_PSU_DATA_GPIO */
-	GPIO11_GPIO,				/* VIPER_PSU_CLK_GPIO */
-	GPIO19_GPIO,				/* VIPER_PSU_nCS_LD_GPIO */
-
-	/* i2c busses */
-	GPIO26_GPIO,				/* VIPER_TPM_I2C_SDA_GPIO */
-	GPIO27_GPIO,				/* VIPER_TPM_I2C_SCL_GPIO */
-	GPIO83_GPIO,				/* VIPER_RTC_I2C_SDA_GPIO */
-	GPIO84_GPIO,				/* VIPER_RTC_I2C_SCL_GPIO */
-
-	/* PC/104 Interrupt */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* VIPER_CPLD_GPIO */
-};
-
-static unsigned long viper_tpm;
-
-static int __init viper_tpm_setup(char *str)
-{
-	return kstrtoul(str, 10, &viper_tpm) >= 0;
-}
-
-__setup("tpm=", viper_tpm_setup);
-
-struct gpiod_lookup_table viper_tpm_i2c_gpiod_table = {
-	.dev_id = "i2c-gpio.2",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", VIPER_TPM_I2C_SDA_GPIO,
-				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP_IDX("gpio-pxa", VIPER_TPM_I2C_SCL_GPIO,
-				NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static void __init viper_tpm_init(void)
-{
-	struct platform_device *tpm_device;
-	struct i2c_gpio_platform_data i2c_tpm_data = {
-		.udelay  = 10,
-		.timeout = HZ,
-	};
-	char *errstr;
-
-	/* Allocate TPM i2c bus if requested */
-	if (!viper_tpm)
-		return;
-
-	gpiod_add_lookup_table(&viper_tpm_i2c_gpiod_table);
-	tpm_device = platform_device_alloc("i2c-gpio", 2);
-	if (tpm_device) {
-		if (!platform_device_add_data(tpm_device,
-					      &i2c_tpm_data,
-					      sizeof(i2c_tpm_data))) {
-			if (platform_device_add(tpm_device)) {
-				errstr = "register TPM i2c bus";
-				goto error_free_tpm;
-			}
-		} else {
-			errstr = "allocate TPM i2c bus data";
-			goto error_free_tpm;
-		}
-	} else {
-		errstr = "allocate TPM i2c device";
-		goto error_tpm;
-	}
-
-	return;
-
-error_free_tpm:
-	kfree(tpm_device);
-error_tpm:
-	pr_err("viper: Couldn't %s, giving up\n", errstr);
-}
-
-static void __init viper_init_vcore_gpios(void)
-{
-	if (gpio_request(VIPER_PSU_DATA_GPIO, "PSU data"))
-		goto err_request_data;
-
-	if (gpio_request(VIPER_PSU_CLK_GPIO, "PSU clock"))
-		goto err_request_clk;
-
-	if (gpio_request(VIPER_PSU_nCS_LD_GPIO, "PSU cs"))
-		goto err_request_cs;
-
-	if (gpio_direction_output(VIPER_PSU_DATA_GPIO, 0) ||
-	    gpio_direction_output(VIPER_PSU_CLK_GPIO, 0) ||
-	    gpio_direction_output(VIPER_PSU_nCS_LD_GPIO, 0))
-		goto err_dir;
-
-	/* c/should assume redboot set the correct level ??? */
-	viper_set_core_cpu_voltage(pxa25x_get_clk_frequency_khz(0), 1);
-
-	return;
-
-err_dir:
-	gpio_free(VIPER_PSU_nCS_LD_GPIO);
-err_request_cs:
-	gpio_free(VIPER_PSU_CLK_GPIO);
-err_request_clk:
-	gpio_free(VIPER_PSU_DATA_GPIO);
-err_request_data:
-	pr_err("viper: Failed to setup vcore control GPIOs\n");
-}
-
-static void __init viper_init_serial_gpio(void)
-{
-	if (gpio_request(VIPER_UART_SHDN_GPIO, "UARTs shutdown"))
-		goto err_request;
-
-	if (gpio_direction_output(VIPER_UART_SHDN_GPIO, 0))
-		goto err_dir;
-
-	return;
-
-err_dir:
-	gpio_free(VIPER_UART_SHDN_GPIO);
-err_request:
-	pr_err("viper: Failed to setup UART shutdown GPIO\n");
-}
-
-#ifdef CONFIG_CPU_FREQ
-static int viper_cpufreq_notifier(struct notifier_block *nb,
-				  unsigned long val, void *data)
-{
-	struct cpufreq_freqs *freq = data;
-
-	/* TODO: Adjust timings??? */
-
-	switch (val) {
-	case CPUFREQ_PRECHANGE:
-		if (freq->old < freq->new) {
-			/* we are getting faster so raise the voltage
-			 * before we change freq */
-			viper_set_core_cpu_voltage(freq->new, 0);
-		}
-		break;
-	case CPUFREQ_POSTCHANGE:
-		if (freq->old > freq->new) {
-			/* we are slowing down so drop the power
-			 * after we change freq */
-			viper_set_core_cpu_voltage(freq->new, 0);
-		}
-		break;
-	default:
-		/* ignore */
-		break;
-	}
-
-	return 0;
-}
-
-static struct notifier_block viper_cpufreq_notifier_block = {
-	.notifier_call  = viper_cpufreq_notifier
-};
-
-static void __init viper_init_cpufreq(void)
-{
-	if (cpufreq_register_notifier(&viper_cpufreq_notifier_block,
-				      CPUFREQ_TRANSITION_NOTIFIER))
-		pr_err("viper: Failed to setup cpufreq notifier\n");
-}
-#else
-static inline void viper_init_cpufreq(void) {}
-#endif
-
-static void viper_power_off(void)
-{
-	pr_notice("Shutting off UPS\n");
-	gpio_set_value(VIPER_UPS_GPIO, 1);
-	/* Spin to death... */
-	while (1);
-}
-
-static void __init viper_init(void)
-{
-	u8 version;
-
-	pm_power_off = viper_power_off;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	/* Wake-up serial console */
-	viper_init_serial_gpio();
-
-	pxa_set_fb_info(NULL, &fb_info);
-
-	/* v1 hardware cannot use the datacs line */
-	version = viper_hw_version();
-	if (version == 0)
-		smc91x_device.num_resources--;
-
-	pxa_set_i2c_info(NULL);
-	gpiod_add_lookup_table(&viper_i2c_gpiod_table);
-	pwm_add_table(viper_pwm_lookup, ARRAY_SIZE(viper_pwm_lookup));
-	platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
-
-	viper_init_vcore_gpios();
-	viper_init_cpufreq();
-
-	register_syscore_ops(&viper_cpu_syscore_ops);
-
-	if (version) {
-		pr_info("viper: hardware v%di%d detected. "
-			"CPLD revision %d.\n",
-			VIPER_BOARD_VERSION(version),
-			VIPER_BOARD_ISSUE(version),
-			VIPER_CPLD_REVISION(version));
-		system_rev = (VIPER_BOARD_VERSION(version) << 8) |
-			     (VIPER_BOARD_ISSUE(version) << 4) |
-			     VIPER_CPLD_REVISION(version);
-	} else {
-		pr_info("viper: No version register.\n");
-	}
-
-	i2c_register_board_info(1, ARRAY_AND_SIZE(viper_i2c_devices));
-
-	viper_tpm_init();
-	pxa_set_ac97_info(NULL);
-}
-
-static struct map_desc viper_io_desc[] __initdata = {
-	{
-		.virtual = VIPER_CPLD_BASE,
-		.pfn     = __phys_to_pfn(VIPER_CPLD_PHYS),
-		.length  = 0x00300000,
-		.type    = MT_DEVICE,
-	},
-	{
-		.virtual = VIPER_PC104IO_BASE,
-		.pfn     = __phys_to_pfn(0x30000000),
-		.length  = 0x00800000,
-		.type    = MT_DEVICE,
-	},
-	{
-		/*
-		 * ISA I/O space mapping:
-		 * -  ports 0x0000-0x0fff are PC/104
-		 * -  ports 0x10000-0x10fff are PCMCIA slot 1
-		 * -  ports 0x11000-0x11fff are PC/104
-		 */
-		.virtual = PCI_IO_VIRT_BASE,
-		.pfn     = __phys_to_pfn(0x30000000),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-};
-
-static void __init viper_map_io(void)
-{
-	pxa25x_map_io();
-
-	iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
-
-	PCFR |= PCFR_OPDE;
-}
-
-MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
-	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.atag_offset	= 0x100,
-	.map_io		= viper_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= viper_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= viper_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/viper.h b/arch/arm/mach-pxa/viper.h
deleted file mode 100644
index 5a8b132229dc..000000000000
--- a/arch/arm/mach-pxa/viper.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-pxa/include/mach/viper.h
- *
- * Author:	Ian Campbell
- * Created:	Feb 03, 2003
- * Copyright:	Arcom Control Systems.
- *
- * Maintained by Marc Zyngier <maz@misterjones.org>
- *			      <marc.zyngier@altran.com>
- *
- * Created based on lubbock.h:
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- */
-
-#ifndef ARCH_VIPER_H
-#define ARCH_VIPER_H
-
-#define VIPER_BOOT_PHYS		PXA_CS0_PHYS
-#define VIPER_FLASH_PHYS	PXA_CS1_PHYS
-#define VIPER_ETH_PHYS		PXA_CS2_PHYS
-#define VIPER_USB_PHYS		PXA_CS3_PHYS
-#define VIPER_ETH_DATA_PHYS	PXA_CS4_PHYS
-#define VIPER_CPLD_PHYS		PXA_CS5_PHYS
-
-#define VIPER_CPLD_BASE		(0xf0000000)
-#define VIPER_PC104IO_BASE	(0xf1000000)
-#define VIPER_USB_BASE		(0xf1800000)
-
-#define VIPER_ETH_GPIO		(0)
-#define VIPER_CPLD_GPIO		(1)
-#define VIPER_USB_GPIO		(2)
-#define VIPER_UARTA_GPIO	(4)
-#define VIPER_UARTB_GPIO	(3)
-#define VIPER_CF_CD_GPIO	(32)
-#define VIPER_CF_RDY_GPIO	(8)
-#define VIPER_BCKLIGHT_EN_GPIO	(9)
-#define VIPER_LCD_EN_GPIO	(10)
-#define VIPER_PSU_DATA_GPIO	(6)
-#define VIPER_PSU_CLK_GPIO	(11)
-#define VIPER_UART_SHDN_GPIO	(12)
-#define VIPER_BRIGHTNESS_GPIO	(16)
-#define VIPER_PSU_nCS_LD_GPIO	(19)
-#define VIPER_UPS_GPIO		(20)
-#define VIPER_CF_POWER_GPIO	(82)
-#define VIPER_TPM_I2C_SDA_GPIO	(26)
-#define VIPER_TPM_I2C_SCL_GPIO	(27)
-#define VIPER_RTC_I2C_SDA_GPIO	(83)
-#define VIPER_RTC_I2C_SCL_GPIO	(84)
-
-#define VIPER_CPLD_P2V(x)	((x) - VIPER_CPLD_PHYS + VIPER_CPLD_BASE)
-#define VIPER_CPLD_V2P(x)	((x) - VIPER_CPLD_BASE + VIPER_CPLD_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __VIPER_CPLD_REG(x)	(*((volatile u16 *)VIPER_CPLD_P2V(x)))
-#endif
-
-/* board level registers in the CPLD: (offsets from CPLD_BASE) ... */
-
-/* ... Physical addresses */
-#define _VIPER_LO_IRQ_STATUS	(VIPER_CPLD_PHYS + 0x100000)
-#define _VIPER_ICR_PHYS		(VIPER_CPLD_PHYS + 0x100002)
-#define _VIPER_HI_IRQ_STATUS	(VIPER_CPLD_PHYS + 0x100004)
-#define _VIPER_VERSION_PHYS	(VIPER_CPLD_PHYS + 0x100006)
-#define VIPER_UARTA_PHYS	(VIPER_CPLD_PHYS + 0x300010)
-#define VIPER_UARTB_PHYS	(VIPER_CPLD_PHYS + 0x300000)
-#define _VIPER_SRAM_BASE	(VIPER_CPLD_PHYS + 0x800000)
-
-/* ... Virtual addresses */
-#define VIPER_LO_IRQ_STATUS	__VIPER_CPLD_REG(_VIPER_LO_IRQ_STATUS)
-#define VIPER_HI_IRQ_STATUS	__VIPER_CPLD_REG(_VIPER_HI_IRQ_STATUS)
-#define VIPER_VERSION		__VIPER_CPLD_REG(_VIPER_VERSION_PHYS)
-#define VIPER_ICR		__VIPER_CPLD_REG(_VIPER_ICR_PHYS)
-
-/* Decode VIPER_VERSION register */
-#define VIPER_CPLD_REVISION(x)	(((x) >> 5) & 0x7)
-#define VIPER_BOARD_VERSION(x)	(((x) >> 3) & 0x3)
-#define VIPER_BOARD_ISSUE(x)	(((x) >> 0) & 0x7)
-
-/* Interrupt and Configuration Register (VIPER_ICR) */
-/* This is a write only register. Only CF_RST is used under Linux */
-
-#define VIPER_ICR_RETRIG	(1 << 0)
-#define VIPER_ICR_AUTO_CLR	(1 << 1)
-#define VIPER_ICR_R_DIS		(1 << 2)
-#define VIPER_ICR_CF_RST	(1 << 3)
-
-#endif
-
diff --git a/arch/arm/mach-pxa/vpac270-pcmcia.c b/arch/arm/mach-pxa/vpac270-pcmcia.c
deleted file mode 100644
index 9fd990c8a5fb..000000000000
--- a/arch/arm/mach-pxa/vpac270-pcmcia.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_vpac270.c
- *
- * Driver for Voipac PXA270 PCMCIA and CF sockets
- *
- * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include "vpac270.h"
-
-#include <pcmcia/soc_common.h>
-
-static struct gpio vpac270_pcmcia_gpios[] = {
-	{ GPIO107_VPAC270_PCMCIA_PPEN,	GPIOF_INIT_LOW,	"PCMCIA PPEN" },
-	{ GPIO11_VPAC270_PCMCIA_RESET,	GPIOF_INIT_LOW,	"PCMCIA Reset" },
-};
-
-static struct gpio vpac270_cf_gpios[] = {
-	{ GPIO16_VPAC270_CF_RESET,	GPIOF_INIT_LOW,	"CF Reset" },
-};
-
-static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	if (skt->nr == 0) {
-		ret = gpio_request_array(vpac270_pcmcia_gpios,
-				ARRAY_SIZE(vpac270_pcmcia_gpios));
-
-		skt->stat[SOC_STAT_CD].gpio = GPIO84_VPAC270_PCMCIA_CD;
-		skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO35_VPAC270_PCMCIA_RDY;
-		skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-	} else {
-		ret = gpio_request_array(vpac270_cf_gpios,
-				ARRAY_SIZE(vpac270_cf_gpios));
-
-		skt->stat[SOC_STAT_CD].gpio = GPIO17_VPAC270_CF_CD;
-		skt->stat[SOC_STAT_CD].name = "CF CD";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO12_VPAC270_CF_RDY;
-		skt->stat[SOC_STAT_RDY].name = "CF Ready";
-	}
-
-	return ret;
-}
-
-static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	if (skt->nr == 0)
-		gpio_free_array(vpac270_pcmcia_gpios,
-					ARRAY_SIZE(vpac270_pcmcia_gpios));
-	else
-		gpio_free_array(vpac270_cf_gpios,
-					ARRAY_SIZE(vpac270_cf_gpios));
-}
-
-static void vpac270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int
-vpac270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	if (skt->nr == 0) {
-		gpio_set_value(GPIO11_VPAC270_PCMCIA_RESET,
-			(state->flags & SS_RESET));
-		gpio_set_value(GPIO107_VPAC270_PCMCIA_PPEN,
-			!(state->Vcc == 33 || state->Vcc == 50));
-	} else {
-		gpio_set_value(GPIO16_VPAC270_CF_RESET,
-			(state->flags & SS_RESET));
-	}
-
-	return 0;
-}
-
-static struct pcmcia_low_level vpac270_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 0,
-	.nr			= 2,
-
-	.hw_init		= vpac270_pcmcia_hw_init,
-	.hw_shutdown		= vpac270_pcmcia_hw_shutdown,
-
-	.socket_state		= vpac270_pcmcia_socket_state,
-	.configure_socket	= vpac270_pcmcia_configure_socket,
-};
-
-static struct platform_device *vpac270_pcmcia_device;
-
-static int __init vpac270_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_vpac270())
-		return -ENODEV;
-
-	vpac270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!vpac270_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(vpac270_pcmcia_device,
-		&vpac270_pcmcia_ops, sizeof(vpac270_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(vpac270_pcmcia_device);
-
-	if (ret)
-		platform_device_put(vpac270_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit vpac270_pcmcia_exit(void)
-{
-	platform_device_unregister(vpac270_pcmcia_device);
-}
-
-module_init(vpac270_pcmcia_init);
-module_exit(vpac270_pcmcia_exit);
-
-MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Voipac PXA270");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
deleted file mode 100644
index 8f74bafcf1f9..000000000000
--- a/arch/arm/mach-pxa/vpac270.c
+++ /dev/null
@@ -1,736 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for Voipac PXA270
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/onenand.h>
-#include <linux/dm9000.h>
-#include <linux/ucb1400.h>
-#include <linux/ata_platform.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max1586.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa27x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "vpac270.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include "pxa27x-udc.h"
-#include "udc.h"
-#include <linux/platform_data/ata-pxa.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long vpac270_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO53_GPIO,	/* SD detect */
-	GPIO52_GPIO,	/* SD r/o switch */
-
-	/* GPIO KEYS */
-	GPIO1_GPIO,	/* USER BTN */
-
-	/* LEDs */
-	GPIO15_GPIO,	/* orange led */
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-	GPIO27_FFUART_RTS,
-	GPIO100_FFUART_CTS,
-	GPIO33_FFUART_DSR,
-	GPIO40_FFUART_DTR,
-	GPIO10_FFUART_DCD,
-	GPIO38_FFUART_RI,
-
-	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO86_LCD_LDD_16,
-	GPIO87_LCD_LDD_17,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
-
-	/* PCMCIA */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO57_nIOIS16,
-	GPIO56_nPWAIT,
-	GPIO104_PSKTSEL,
-	GPIO84_GPIO,	/* PCMCIA CD */
-	GPIO35_GPIO,	/* PCMCIA RDY */
-	GPIO107_GPIO,	/* PCMCIA PPEN */
-	GPIO11_GPIO,	/* PCMCIA RESET */
-	GPIO17_GPIO,	/* CF CD */
-	GPIO12_GPIO,	/* CF RDY */
-	GPIO16_GPIO,	/* CF RESET */
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	GPIO119_USBH2_PWR,
-	GPIO120_USBH2_PEN,
-
-	/* UDC */
-	GPIO41_GPIO,
-
-	/* Ethernet */
-	GPIO114_GPIO,	/* IRQ */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO95_AC97_nRESET,
-	GPIO98_AC97_SYSCLK,
-	GPIO113_GPIO,	/* TS IRQ */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* IDE */
-	GPIO36_GPIO,	/* IDE IRQ */
-	GPIO80_DREQ_1,
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition vpac270_nor_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data vpac270_flash_data[] = {
-	{
-		.width		= 2,	/* bankwidth in bytes */
-		.parts		= vpac270_nor_partitions,
-		.nr_parts	= ARRAY_SIZE(vpac270_nor_partitions)
-	}
-};
-
-static struct resource vpac270_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device vpac270_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &vpac270_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = vpac270_flash_data,
-	},
-};
-static void __init vpac270_nor_init(void)
-{
-	platform_device_register(&vpac270_flash);
-}
-#else
-static inline void vpac270_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * OneNAND Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
-static struct mtd_partition vpac270_onenand_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct onenand_platform_data vpac270_onenand_info = {
-	.parts		= vpac270_onenand_partitions,
-	.nr_parts	= ARRAY_SIZE(vpac270_onenand_partitions),
-};
-
-static struct resource vpac270_onenand_resources[] = {
-	[0] = {
-		.start	= PXA_CS0_PHYS,
-		.end	= PXA_CS0_PHYS + SZ_1M,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device vpac270_onenand = {
-	.name		= "onenand-flash",
-	.id		= -1,
-	.resource	= vpac270_onenand_resources,
-	.num_resources	= ARRAY_SIZE(vpac270_onenand_resources),
-	.dev		= {
-		.platform_data	= &vpac270_onenand_info,
-	},
-};
-
-static void __init vpac270_onenand_init(void)
-{
-	platform_device_register(&vpac270_onenand);
-}
-#else
-static void __init vpac270_onenand_init(void) {}
-#endif
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data vpac270_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-static struct gpiod_lookup_table vpac270_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO53_VPAC270_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO52_VPAC270_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init vpac270_mmc_init(void)
-{
-	gpiod_add_lookup_table(&vpac270_mci_gpio_table);
-	pxa_set_mci_info(&vpac270_mci_platform_data);
-}
-#else
-static inline void vpac270_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button vpac270_pxa_buttons[] = {
-	{KEY_POWER, GPIO1_VPAC270_USER_BTN, 0, "USER BTN"},
-};
-
-static struct gpio_keys_platform_data vpac270_pxa_keys_data = {
-	.buttons	= vpac270_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(vpac270_pxa_buttons),
-};
-
-static struct platform_device vpac270_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &vpac270_pxa_keys_data,
-	},
-};
-
-static void __init vpac270_keys_init(void)
-{
-	platform_device_register(&vpac270_pxa_keys);
-}
-#else
-static inline void vpac270_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * LED
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led vpac270_gpio_leds[] = {
-{
-	.name			= "vpac270:orange:user",
-	.default_trigger	= "none",
-	.gpio			= GPIO15_VPAC270_LED_ORANGE,
-	.active_low		= 1,
-}
-};
-
-static struct gpio_led_platform_data vpac270_gpio_led_info = {
-	.leds		= vpac270_gpio_leds,
-	.num_leds	= ARRAY_SIZE(vpac270_gpio_leds),
-};
-
-static struct platform_device vpac270_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &vpac270_gpio_led_info,
-	}
-};
-
-static void __init vpac270_leds_init(void)
-{
-	platform_device_register(&vpac270_leds);
-}
-#else
-static inline void vpac270_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int vpac270_ohci_init(struct device *dev)
-{
-	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-	return 0;
-}
-
-static struct pxaohci_platform_data vpac270_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
-			POWER_CONTROL_LOW | POWER_SENSE_LOW,
-	.init		= vpac270_ohci_init,
-};
-
-static void __init vpac270_uhc_init(void)
-{
-	pxa_set_ohci_info(&vpac270_ohci_info);
-}
-#else
-static inline void vpac270_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Gadget
- ******************************************************************************/
-#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static struct gpiod_lookup_table vpac270_gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO41_VPAC270_UDC_DETECT,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device vpac270_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-static void vpac270_udc_command(int cmd)
-{
-	if (cmd == PXA2XX_UDC_CMD_CONNECT)
-		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
-	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
-		UP2OCR = UP2OCR_HXOE;
-}
-
-static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = {
-	.udc_command		= vpac270_udc_command,
-	.gpio_pullup		= -1,
-};
-
-static void __init vpac270_udc_init(void)
-{
-	pxa_set_udc_info(&vpac270_udc_info);
-	gpiod_add_lookup_table(&vpac270_gpio_vbus_gpiod_table);
-	platform_device_register(&vpac270_gpio_vbus);
-}
-#else
-static inline void vpac270_udc_init(void) {}
-#endif
-
-/******************************************************************************
- * Ethernet
- ******************************************************************************/
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource vpac270_dm9000_resources[] = {
-	[0] = {
-		.start	= PXA_CS2_PHYS + 0x300,
-		.end	= PXA_CS2_PHYS + 0x303,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_CS2_PHYS + 0x304,
-		.end	= PXA_CS2_PHYS + 0x343,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct dm9000_plat_data vpac270_dm9000_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY,
-};
-
-static struct platform_device vpac270_dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(vpac270_dm9000_resources),
-	.resource	= vpac270_dm9000_resources,
-	.dev		= {
-		.platform_data = &vpac270_dm9000_platdata,
-	}
-};
-
-static void __init vpac270_eth_init(void)
-{
-	platform_device_register(&vpac270_dm9000_device);
-}
-#else
-static inline void vpac270_eth_init(void) {}
-#endif
-
-/******************************************************************************
- * Audio and Touchscreen
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static pxa2xx_audio_ops_t vpac270_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-static struct ucb1400_pdata vpac270_ucb1400_pdata = {
-	.irq		= PXA_GPIO_TO_IRQ(GPIO113_VPAC270_TS_IRQ),
-};
-
-static struct platform_device vpac270_ucb1400_device = {
-	.name		= "ucb1400_core",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &vpac270_ucb1400_pdata,
-	},
-};
-
-static void __init vpac270_ts_init(void)
-{
-	pxa_set_ac97_info(&vpac270_ac97_pdata);
-	platform_device_register(&vpac270_ucb1400_device);
-}
-#else
-static inline void vpac270_ts_init(void) {}
-#endif
-
-/******************************************************************************
- * RTC
- ******************************************************************************/
-#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
-static struct i2c_board_info __initdata vpac270_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("ds1339", 0x68),
-	},
-};
-
-static void __init vpac270_rtc_init(void)
-{
-	i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs));
-}
-#else
-static inline void vpac270_rtc_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info vpac270_lcd_modes[] = {
-{
-	.pixclock	= 57692,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 32,
-	.depth		= 18,
-
-	.left_margin	= 144,
-	.right_margin	= 32,
-	.upper_margin	= 13,
-	.lower_margin	= 30,
-
-	.hsync_len	= 32,
-	.vsync_len	= 2,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-}, {	/* CRT 640x480 */
-	.pixclock	= 35000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 16,
-	.depth		= 16,
-
-	.left_margin	= 96,
-	.right_margin	= 48,
-	.upper_margin	= 33,
-	.lower_margin	= 10,
-
-	.hsync_len	= 48,
-	.vsync_len	= 1,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-}, {	/* CRT 800x600 H=30kHz V=48HZ */
-	.pixclock	= 25000,
-	.xres		= 800,
-	.yres		= 600,
-	.bpp		= 16,
-	.depth		= 16,
-
-	.left_margin	= 50,
-	.right_margin	= 1,
-	.upper_margin	= 21,
-	.lower_margin	= 12,
-
-	.hsync_len	= 8,
-	.vsync_len	= 1,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-}, {	/* CRT 1024x768 H=40kHz V=50Hz */
-	.pixclock	= 15000,
-	.xres		= 1024,
-	.yres		= 768,
-	.bpp		= 16,
-	.depth		= 16,
-
-	.left_margin	= 220,
-	.right_margin	= 8,
-	.upper_margin	= 33,
-	.lower_margin	= 2,
-
-	.hsync_len	= 48,
-	.vsync_len	= 1,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-}
-};
-
-static struct pxafb_mach_info vpac270_lcd_screen = {
-	.modes		= vpac270_lcd_modes,
-	.num_modes	= ARRAY_SIZE(vpac270_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_18BPP,
-};
-
-static void vpac270_lcd_power(int on, struct fb_var_screeninfo *info)
-{
-	gpio_set_value(GPIO81_VPAC270_BKL_ON, on);
-}
-
-static void __init vpac270_lcd_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO81_VPAC270_BKL_ON, "BKL-ON");
-	if (ret) {
-		pr_err("Requesting BKL-ON GPIO failed!\n");
-		goto err;
-	}
-
-	ret = gpio_direction_output(GPIO81_VPAC270_BKL_ON, 1);
-	if (ret) {
-		pr_err("Setting BKL-ON GPIO direction failed!\n");
-		goto err2;
-	}
-
-	vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
-	pxa_set_fb_info(NULL, &vpac270_lcd_screen);
-	return;
-
-err2:
-	gpio_free(GPIO81_VPAC270_BKL_ON);
-err:
-	return;
-}
-#else
-static inline void vpac270_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * PATA IDE
- ******************************************************************************/
-#if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE)
-static struct pata_pxa_pdata vpac270_pata_pdata = {
-	.reg_shift	= 1,
-	.dma_dreq	= 1,
-	.irq_flags	= IRQF_TRIGGER_RISING,
-};
-
-static struct resource vpac270_ide_resources[] = {
-	[0] = {	/* I/O Base address */
-	       .start	= PXA_CS3_PHYS + 0x120,
-	       .end	= PXA_CS3_PHYS + 0x13f,
-	       .flags	= IORESOURCE_MEM
-	},
-	[1] = {	/* CTL Base address */
-	       .start	= PXA_CS3_PHYS + 0x15c,
-	       .end	= PXA_CS3_PHYS + 0x15f,
-	       .flags	= IORESOURCE_MEM
-	},
-	[2] = {	/* DMA Base address */
-	       .start	= PXA_CS3_PHYS + 0x20,
-	       .end	= PXA_CS3_PHYS + 0x2f,
-	       .flags	= IORESOURCE_DMA
-	},
-	[3] = {	/* IDE IRQ pin */
-	       .start	= PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
-	       .end	= PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
-	       .flags	= IORESOURCE_IRQ
-	}
-};
-
-static struct platform_device vpac270_ide_device = {
-	.name		= "pata_pxa",
-	.num_resources	= ARRAY_SIZE(vpac270_ide_resources),
-	.resource	= vpac270_ide_resources,
-	.dev		= {
-		.platform_data	= &vpac270_pata_pdata,
-		.coherent_dma_mask	= 0xffffffff,
-	}
-};
-
-static void __init vpac270_ide_init(void)
-{
-	platform_device_register(&vpac270_ide_device);
-}
-#else
-static inline void vpac270_ide_init(void) {}
-#endif
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-static struct regulator_consumer_supply vpac270_max1587a_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data vpac270_max1587a_v3_info = {
-	.constraints = {
-		.name		= "vcc_core range",
-		.min_uV		= 900000,
-		.max_uV		= 1705000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.consumer_supplies	= vpac270_max1587a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(vpac270_max1587a_consumers),
-};
-
-static struct max1586_subdev_data vpac270_max1587a_subdevs[] = {
-	{
-		.name		= "vcc_core",
-		.id		= MAX1586_V3,
-		.platform_data	= &vpac270_max1587a_v3_info,
-	}
-};
-
-static struct max1586_platform_data vpac270_max1587a_info = {
-	.subdevs     = vpac270_max1587a_subdevs,
-	.num_subdevs = ARRAY_SIZE(vpac270_max1587a_subdevs),
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata vpac270_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data	= &vpac270_max1587a_info,
-	},
-};
-
-static void __init vpac270_pmic_init(void)
-{
-	i2c_register_board_info(1, ARRAY_AND_SIZE(vpac270_pi2c_board_info));
-}
-#else
-static inline void vpac270_pmic_init(void) {}
-#endif
-
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init vpac270_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_i2c_info(NULL);
-	pxa27x_set_i2c_power_info(NULL);
-
-	vpac270_pmic_init();
-	vpac270_lcd_init();
-	vpac270_mmc_init();
-	vpac270_nor_init();
-	vpac270_onenand_init();
-	vpac270_leds_init();
-	vpac270_keys_init();
-	vpac270_uhc_init();
-	vpac270_udc_init();
-	vpac270_eth_init();
-	vpac270_ts_init();
-	vpac270_rtc_init();
-	vpac270_ide_init();
-
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(VPAC270, "Voipac PXA270")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= vpac270_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/vpac270.h b/arch/arm/mach-pxa/vpac270.h
deleted file mode 100644
index 0cd094d8c553..000000000000
--- a/arch/arm/mach-pxa/vpac270.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Voipac PXA270
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- */
-
-#ifndef _INCLUDE_VPAC270_H_
-#define _INCLUDE_VPAC270_H_
-
-#define	GPIO1_VPAC270_USER_BTN		1
-
-#define	GPIO15_VPAC270_LED_ORANGE	15
-
-#define	GPIO81_VPAC270_BKL_ON		81
-#define	GPIO83_VPAC270_NL_ON		83
-
-#define	GPIO52_VPAC270_SD_READONLY	52
-#define	GPIO53_VPAC270_SD_DETECT_N	53
-
-#define	GPIO84_VPAC270_PCMCIA_CD	84
-#define	GPIO35_VPAC270_PCMCIA_RDY	35
-#define	GPIO107_VPAC270_PCMCIA_PPEN	107
-#define	GPIO11_VPAC270_PCMCIA_RESET	11
-#define	GPIO17_VPAC270_CF_CD		17
-#define	GPIO12_VPAC270_CF_RDY		12
-#define	GPIO16_VPAC270_CF_RESET		16
-
-#define	GPIO41_VPAC270_UDC_DETECT	41
-
-#define	GPIO114_VPAC270_ETH_IRQ		114
-
-#define	GPIO36_VPAC270_IDE_IRQ		36
-
-#define	GPIO113_VPAC270_TS_IRQ		113
-
-#endif
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
deleted file mode 100644
index 6bb02b65fb82..000000000000
--- a/arch/arm/mach-pxa/xcep.c
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*  linux/arch/arm/mach-pxa/xcep.c
- *
- *  Support for the Iskratel Electronics XCEP platform as used in
- *  the Libera instruments from Instrumentation Technologies.
- *
- *  Author:     Ales Bardorfer <ales@i-tech.si>
- *  Contributions by: Abbott, MG (Michael) <michael.abbott@diamond.ac.uk>
- *  Contributions by: Matej Kenda <matej.kenda@i-tech.si>
- *  Created:    June 2006
- *  Copyright:  (C) 2006-2009 Instrumentation Technologies
- */
-
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/smc91x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include "pxa25x.h"
-#include "addr-map.h"
-#include "smemc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-#define XCEP_ETH_PHYS		(PXA_CS3_PHYS + 0x00000300)
-#define XCEP_ETH_PHYS_END	(PXA_CS3_PHYS + 0x000fffff)
-#define XCEP_ETH_ATTR		(PXA_CS3_PHYS + 0x02000000)
-#define XCEP_ETH_ATTR_END	(PXA_CS3_PHYS + 0x020fffff)
-#define XCEP_ETH_IRQ		IRQ_GPIO0
-
-/*  XCEP CPLD base */
-#define XCEP_CPLD_BASE		0xf0000000
-
-
-/* Flash partitions. */
-
-static struct mtd_partition xcep_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE
-	}, {
-		.name =		"Bootloader ENV",
-		.size =		0x00040000,
-		.offset =	0x00040000,
-		.mask_flags =	MTD_WRITEABLE
-	}, {
-		.name =		"Kernel",
-		.size =		0x00100000,
-		.offset =	0x00080000,
-	}, {
-		.name =		"Rescue fs",
-		.size =		0x00280000,
-		.offset =	0x00180000,
-	}, {
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00400000
-	}
-};
-
-static struct physmap_flash_data xcep_flash_data[] = {
-	{
-		.width		= 4,		/* bankwidth in bytes */
-		.parts		= xcep_partitions,
-		.nr_parts	= ARRAY_SIZE(xcep_partitions)
-	}
-};
-
-static struct resource flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev 	= {
-		.platform_data = xcep_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-
-
-/* SMC LAN91C111 network controller. */
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start	= XCEP_ETH_PHYS,
-		.end	= XCEP_ETH_PHYS_END,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= XCEP_ETH_IRQ,
-		.end	= XCEP_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= "smc91x-attrib",
-		.start	= XCEP_ETH_ATTR,
-		.end	= XCEP_ETH_ATTR_END,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct smc91x_platdata xcep_smc91x_info = {
-	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
-		  SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &xcep_smc91x_info,
-	},
-};
-
-
-static struct platform_device *devices[] __initdata = {
-	&flash_device,
-	&smc91x_device,
-};
-
-
-/* We have to state that there are HWMON devices on the I2C bus on XCEP.
- * Drivers for HWMON verify capabilities of the adapter when loading and
- * refuse to attach if the adapter doesn't support HWMON class of devices. */
-static struct i2c_pxa_platform_data xcep_i2c_platform_data  = {
-	.class = I2C_CLASS_HWMON
-};
-
-
-static mfp_cfg_t xcep_pin_config[] __initdata = {
-	GPIO79_nCS_3,	/* SMC 91C111 chip select. */
-	GPIO80_nCS_4,	/* CPLD chip select. */
-	/* SSP communication to MSP430 */
-	GPIO23_SSP1_SCLK,
-	GPIO24_SSP1_SFRM,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO27_SSP1_EXTCLK
-};
-
-static void __init xcep_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_hwuart_info(NULL);
-
-	/* See Intel XScale Developer's Guide for details */
-	/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
-	__raw_writel((__raw_readl(MSC1) & 0xffff) | 0xD5540000, MSC1);
-	/* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
-	__raw_writel((__raw_readl(MSC2) & 0xffff) | 0x72A00000, MSC2);
-
-	platform_add_devices(ARRAY_AND_SIZE(devices));
-	pxa_set_i2c_info(&xcep_i2c_platform_data);
-}
-
-MACHINE_START(XCEP, "Iskratel XCEP")
-	.atag_offset	= 0x100,
-	.init_machine	= xcep_init,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
deleted file mode 100644
index c4d4162a7e6e..000000000000
--- a/arch/arm/mach-pxa/z2.c
+++ /dev/null
@@ -1,781 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/z2.c
- *
- *  Support for the Zipit Z2 Handheld device.
- *
- *  Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
- *
- *  Based on research and code by: Ken McGuire
- *  Based on mainstone.c as modified for the Zipit Z2.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/z2_battery.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/spi/libertas_spi.h>
-#include <linux/power_supply.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio_keys.h>
-#include <linux/delay.h>
-#include <linux/regulator/machine.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa27x.h"
-#include "mfp-pxa27x.h"
-#include "z2.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "pm.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long z2_pin_config[] = {
-
-	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
-	GPIO19_GPIO,		/* LCD reset */
-	GPIO88_GPIO,		/* LCD chipselect */
-
-	/* PWM */
-	GPIO115_PWM1_OUT,	/* Keypad Backlight */
-	GPIO11_PWM2_OUT,	/* LCD Backlight */
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO96_GPIO,		/* SD detect */
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* Keypad */
-	GPIO100_KP_MKIN_0,
-	GPIO101_KP_MKIN_1,
-	GPIO102_KP_MKIN_2,
-	GPIO34_KP_MKIN_3,
-	GPIO38_KP_MKIN_4,
-	GPIO16_KP_MKIN_5,
-	GPIO17_KP_MKIN_6,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-	GPIO35_KP_MKOUT_6,
-	GPIO41_KP_MKOUT_7,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,	/* SSP1_SCK */
-	GPIO25_SSP1_TXD,	/* SSP1_TXD */
-	GPIO26_SSP1_RXD,	/* SSP1_RXD */
-
-	/* SSP2 */
-	GPIO22_SSP2_SCLK,	/* SSP2_SCK */
-	GPIO13_SSP2_TXD,	/* SSP2_TXD */
-	GPIO40_SSP2_RXD,	/* SSP2_RXD */
-
-	/* LEDs */
-	GPIO10_GPIO,		/* WiFi LED */
-	GPIO83_GPIO,		/* Charging LED */
-	GPIO85_GPIO,		/* Charged LED */
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO113_I2S_SYSCLK,
-
-	/* MISC */
-	GPIO0_GPIO,		/* AC power detect */
-	GPIO1_GPIO,		/* Power button */
-	GPIO37_GPIO,		/* Headphone detect */
-	GPIO98_GPIO,		/* Lid switch */
-	GPIO14_GPIO,		/* WiFi Power */
-	GPIO24_GPIO,		/* WiFi CS */
-	GPIO36_GPIO,		/* WiFi IRQ */
-	GPIO88_GPIO,		/* LCD CS */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct resource z2_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_8M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct mtd_partition z2_flash_parts[] = {
-	{
-		.name	= "U-Boot Bootloader",
-		.offset	= 0x0,
-		.size	= 0x40000,
-	}, {
-		.name	= "U-Boot Environment",
-		.offset	= 0x40000,
-		.size	= 0x20000,
-	}, {
-		.name	= "Flash",
-		.offset	= 0x60000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data z2_flash_data = {
-	.width		= 2,
-	.parts		= z2_flash_parts,
-	.nr_parts	= ARRAY_SIZE(z2_flash_parts),
-};
-
-static struct platform_device z2_flash = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= &z2_flash_resource,
-	.num_resources	= 1,
-	.dev = {
-		.platform_data	= &z2_flash_data,
-	},
-};
-
-static void __init z2_nor_init(void)
-{
-	platform_device_register(&z2_flash);
-}
-#else
-static inline void z2_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static struct pwm_lookup z2_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight.0", NULL, 1260320,
-		   PWM_POLARITY_NORMAL),
-	PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.1", NULL, 1260320,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data z2_backlight_data[] = {
-	[0] = {
-		/* Keypad Backlight */
-		.max_brightness	= 1023,
-		.dft_brightness	= 0,
-	},
-	[1] = {
-		/* LCD Backlight */
-		.max_brightness	= 1023,
-		.dft_brightness	= 512,
-	},
-};
-
-static struct platform_device z2_backlight_devices[2] = {
-	{
-		.name	= "pwm-backlight",
-		.id	= 0,
-		.dev	= {
-			.platform_data	= &z2_backlight_data[1],
-		},
-	},
-	{
-		.name	= "pwm-backlight",
-		.id	= 1,
-		.dev	= {
-			.platform_data	= &z2_backlight_data[0],
-		},
-	},
-};
-static void __init z2_pwm_init(void)
-{
-	pwm_add_table(z2_pwm_lookup, ARRAY_SIZE(z2_pwm_lookup));
-	platform_device_register(&z2_backlight_devices[0]);
-	platform_device_register(&z2_backlight_devices[1]);
-}
-#else
-static inline void z2_pwm_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info z2_lcd_modes[] = {
-{
-	.pixclock	= 192000,
-	.xres		= 240,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 4,
-	.right_margin	= 8,
-	.upper_margin	= 4,
-	.lower_margin	= 8,
-
-	.hsync_len	= 4,
-	.vsync_len	= 4,
-},
-};
-
-static struct pxafb_mach_info z2_lcd_screen = {
-	.modes		= z2_lcd_modes,
-	.num_modes      = ARRAY_SIZE(z2_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_BIAS_ACTIVE_LOW |
-			  LCD_ALTERNATE_MAPPING,
-};
-
-static void __init z2_lcd_init(void)
-{
-	pxa_set_fb_info(NULL, &z2_lcd_screen);
-}
-#else
-static inline void z2_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data z2_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-static struct gpiod_lookup_table z2_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO96_ZIPITZ2_SD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init z2_mmc_init(void)
-{
-	gpiod_add_lookup_table(&z2_mci_gpio_table);
-	pxa_set_mci_info(&z2_mci_platform_data);
-}
-#else
-static inline void z2_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led z2_gpio_leds[] = {
-{
-	.name			= "z2:green:wifi",
-	.default_trigger	= "none",
-	.gpio			= GPIO10_ZIPITZ2_LED_WIFI,
-	.active_low		= 1,
-}, {
-	.name			= "z2:green:charged",
-	.default_trigger	= "mmc0",
-	.gpio			= GPIO85_ZIPITZ2_LED_CHARGED,
-	.active_low		= 1,
-}, {
-	.name			= "z2:amber:charging",
-	.default_trigger	= "Z2-charging-or-full",
-	.gpio			= GPIO83_ZIPITZ2_LED_CHARGING,
-	.active_low		= 1,
-},
-};
-
-static struct gpio_led_platform_data z2_gpio_led_info = {
-	.leds		= z2_gpio_leds,
-	.num_leds	= ARRAY_SIZE(z2_gpio_leds),
-};
-
-static struct platform_device z2_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &z2_gpio_led_info,
-	}
-};
-
-static void __init z2_leds_init(void)
-{
-	platform_device_register(&z2_leds);
-}
-#else
-static inline void z2_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int z2_matrix_keys[] = {
-	KEY(0, 0, KEY_OPTION),
-	KEY(1, 0, KEY_UP),
-	KEY(2, 0, KEY_DOWN),
-	KEY(3, 0, KEY_LEFT),
-	KEY(4, 0, KEY_RIGHT),
-	KEY(5, 0, KEY_END),
-	KEY(6, 0, KEY_KPPLUS),
-
-	KEY(0, 1, KEY_HOME),
-	KEY(1, 1, KEY_Q),
-	KEY(2, 1, KEY_I),
-	KEY(3, 1, KEY_G),
-	KEY(4, 1, KEY_X),
-	KEY(5, 1, KEY_ENTER),
-	KEY(6, 1, KEY_KPMINUS),
-
-	KEY(0, 2, KEY_PAGEUP),
-	KEY(1, 2, KEY_W),
-	KEY(2, 2, KEY_O),
-	KEY(3, 2, KEY_H),
-	KEY(4, 2, KEY_C),
-	KEY(5, 2, KEY_LEFTALT),
-
-	KEY(0, 3, KEY_PAGEDOWN),
-	KEY(1, 3, KEY_E),
-	KEY(2, 3, KEY_P),
-	KEY(3, 3, KEY_J),
-	KEY(4, 3, KEY_V),
-	KEY(5, 3, KEY_LEFTSHIFT),
-
-	KEY(0, 4, KEY_ESC),
-	KEY(1, 4, KEY_R),
-	KEY(2, 4, KEY_A),
-	KEY(3, 4, KEY_K),
-	KEY(4, 4, KEY_B),
-	KEY(5, 4, KEY_LEFTCTRL),
-
-	KEY(0, 5, KEY_TAB),
-	KEY(1, 5, KEY_T),
-	KEY(2, 5, KEY_S),
-	KEY(3, 5, KEY_L),
-	KEY(4, 5, KEY_N),
-	KEY(5, 5, KEY_SPACE),
-
-	KEY(0, 6, KEY_STOPCD),
-	KEY(1, 6, KEY_Y),
-	KEY(2, 6, KEY_D),
-	KEY(3, 6, KEY_BACKSPACE),
-	KEY(4, 6, KEY_M),
-	KEY(5, 6, KEY_COMMA),
-
-	KEY(0, 7, KEY_PLAYCD),
-	KEY(1, 7, KEY_U),
-	KEY(2, 7, KEY_F),
-	KEY(3, 7, KEY_Z),
-	KEY(4, 7, KEY_SEMICOLON),
-	KEY(5, 7, KEY_DOT),
-};
-
-static struct matrix_keymap_data z2_matrix_keymap_data = {
-	.keymap			= z2_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(z2_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data z2_keypad_platform_data = {
-	.matrix_key_rows	= 7,
-	.matrix_key_cols	= 8,
-	.matrix_keymap_data	= &z2_matrix_keymap_data,
-
-	.debounce_interval	= 30,
-};
-
-static void __init z2_mkp_init(void)
-{
-	pxa_set_keypad_info(&z2_keypad_platform_data);
-}
-#else
-static inline void z2_mkp_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button z2_pxa_buttons[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= GPIO1_ZIPITZ2_POWER_BUTTON,
-		.active_low	= 0,
-		.desc		= "Power Button",
-		.wakeup		= 1,
-		.type		= EV_KEY,
-	},
-	{
-		.code		= SW_LID,
-		.gpio		= GPIO98_ZIPITZ2_LID_BUTTON,
-		.active_low	= 1,
-		.desc		= "Lid Switch",
-		.wakeup		= 0,
-		.type		= EV_SW,
-	},
-};
-
-static struct gpio_keys_platform_data z2_pxa_keys_data = {
-	.buttons	= z2_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(z2_pxa_buttons),
-};
-
-static struct platform_device z2_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &z2_pxa_keys_data,
-	},
-};
-
-static void __init z2_keys_init(void)
-{
-	platform_device_register(&z2_pxa_keys);
-}
-#else
-static inline void z2_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * Battery
- ******************************************************************************/
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct z2_battery_info batt_chip_info = {
-	.batt_I2C_bus	= 0,
-	.batt_I2C_addr	= 0x55,
-	.batt_I2C_reg	= 2,
-	.min_voltage	= 3475000,
-	.max_voltage	= 4190000,
-	.batt_div	= 59,
-	.batt_mult	= 1000000,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LION,
-	.batt_name	= "Z2",
-};
-
-static struct gpiod_lookup_table z2_battery_gpio_table = {
-	.dev_id = "aer915",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO0_ZIPITZ2_AC_DETECT,
-			    NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct i2c_board_info __initdata z2_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("aer915", 0x55),
-		.dev_name = "aer915",
-		.platform_data	= &batt_chip_info,
-	}, {
-		I2C_BOARD_INFO("wm8750", 0x1b),
-	},
-
-};
-
-static void __init z2_i2c_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	gpiod_add_lookup_table(&z2_battery_gpio_table);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(z2_i2c_board_info));
-}
-#else
-static inline void z2_i2c_init(void) {}
-#endif
-
-/******************************************************************************
- * SSP Devices - WiFi and LCD control
- ******************************************************************************/
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-/* WiFi */
-static int z2_lbs_spi_setup(struct spi_device *spi)
-{
-	int ret = 0;
-
-	ret = gpio_request(GPIO14_ZIPITZ2_WIFI_POWER, "WiFi Power");
-	if (ret)
-		goto err;
-
-	ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_POWER, 1);
-	if (ret)
-		goto err2;
-
-	/* Wait until card is powered on */
-	mdelay(180);
-
-	spi->bits_per_word = 16;
-	spi->mode = SPI_MODE_2,
-
-	spi_setup(spi);
-
-	return 0;
-
-err2:
-	gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
-err:
-	return ret;
-};
-
-static int z2_lbs_spi_teardown(struct spi_device *spi)
-{
-	gpio_set_value(GPIO14_ZIPITZ2_WIFI_POWER, 0);
-	gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
-
-	return 0;
-};
-
-static struct pxa2xx_spi_chip z2_lbs_chip_info = {
-	.rx_threshold	= 8,
-	.tx_threshold	= 8,
-	.timeout	= 1000,
-};
-
-static struct libertas_spi_platform_data z2_lbs_pdata = {
-	.use_dummy_writes	= 1,
-	.setup			= z2_lbs_spi_setup,
-	.teardown		= z2_lbs_spi_teardown,
-};
-
-/* LCD */
-static struct pxa2xx_spi_chip lms283_chip_info = {
-	.rx_threshold	= 1,
-	.tx_threshold	= 1,
-	.timeout	= 64,
-};
-
-static struct gpiod_lookup_table lms283_gpio_table = {
-	.dev_id = "spi2.0", /* SPI bus 2 chip select 0 */
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO19_ZIPITZ2_LCD_RESET,
-			    "reset", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-{
-	.modalias		= "libertas_spi",
-	.platform_data		= &z2_lbs_pdata,
-	.controller_data	= &z2_lbs_chip_info,
-	.irq			= PXA_GPIO_TO_IRQ(GPIO36_ZIPITZ2_WIFI_IRQ),
-	.max_speed_hz		= 13000000,
-	.bus_num		= 1,
-	.chip_select		= 0,
-},
-{
-	.modalias		= "lms283gf05",
-	.controller_data	= &lms283_chip_info,
-	.max_speed_hz		= 400000,
-	.bus_num		= 2,
-	.chip_select		= 0,
-},
-};
-
-static struct pxa2xx_spi_controller pxa_ssp1_master_info = {
-	.num_chipselect	= 1,
-	.enable_dma	= 1,
-};
-
-static struct pxa2xx_spi_controller pxa_ssp2_master_info = {
-	.num_chipselect	= 1,
-};
-
-static struct gpiod_lookup_table pxa_ssp1_gpio_table = {
-	.dev_id = "spi1",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", GPIO24_ZIPITZ2_WIFI_CS, "cs", 0, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table pxa_ssp2_gpio_table = {
-	.dev_id = "spi2",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", GPIO88_ZIPITZ2_LCD_CS, "cs", 0, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init z2_spi_init(void)
-{
-	gpiod_add_lookup_table(&pxa_ssp1_gpio_table);
-	gpiod_add_lookup_table(&pxa_ssp2_gpio_table);
-	pxa2xx_set_spi_info(1, &pxa_ssp1_master_info);
-	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
-	gpiod_add_lookup_table(&lms283_gpio_table);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-#else
-static inline void z2_spi_init(void) {}
-#endif
-
-static struct gpiod_lookup_table z2_audio_gpio_table = {
-	.dev_id = "soc-audio",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO37_ZIPITZ2_HEADSET_DETECT,
-			    "hsdet-gpio", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_TPS65023) || \
-	defined(CONFIG_REGULATOR_TPS65023_MODULE)
-static struct regulator_consumer_supply z2_tps65021_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data z2_tps65021_info[] = {
-	{
-		.constraints = {
-			.name		= "vcc_core range",
-			.min_uV		= 800000,
-			.max_uV		= 1600000,
-			.always_on	= 1,
-			.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		},
-		.consumer_supplies	= z2_tps65021_consumers,
-		.num_consumer_supplies	= ARRAY_SIZE(z2_tps65021_consumers),
-	}, {
-		.constraints = {
-			.name		= "DCDC2",
-			.min_uV		= 3300000,
-			.max_uV		= 3300000,
-			.always_on	= 1,
-		},
-	}, {
-		.constraints = {
-			.name		= "DCDC3",
-			.min_uV		= 1800000,
-			.max_uV		= 1800000,
-			.always_on	= 1,
-		},
-	}, {
-		.constraints = {
-			.name		= "LDO1",
-			.min_uV		= 1000000,
-			.max_uV		= 3150000,
-			.always_on	= 1,
-		},
-	}, {
-		.constraints = {
-			.name		= "LDO2",
-			.min_uV		= 1050000,
-			.max_uV		= 3300000,
-			.always_on	= 1,
-		},
-	}
-};
-
-static struct i2c_board_info __initdata z2_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("tps65021", 0x48),
-		.platform_data	= &z2_tps65021_info,
-	},
-};
-
-static void __init z2_pmic_init(void)
-{
-	pxa27x_set_i2c_power_info(NULL);
-	i2c_register_board_info(1, ARRAY_AND_SIZE(z2_pi2c_board_info));
-}
-#else
-static inline void z2_pmic_init(void) {}
-#endif
-
-#ifdef CONFIG_PM
-static void z2_power_off(void)
-{
-	/* We're using deep sleep as poweroff, so clear PSPR to ensure that
-	 * bootloader will jump to its entry point in resume handler
-	 */
-	PSPR = 0x0;
-	local_irq_disable();
-	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
-	pxa27x_cpu_pm_enter(PM_SUSPEND_MEM);
-}
-#else
-#define z2_power_off   NULL
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init z2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	z2_lcd_init();
-	z2_mmc_init();
-	z2_mkp_init();
-	z2_i2c_init();
-	z2_spi_init();
-	z2_nor_init();
-	z2_pwm_init();
-	z2_leds_init();
-	z2_keys_init();
-	z2_pmic_init();
-
-	gpiod_add_lookup_table(&z2_audio_gpio_table);
-
-	pm_power_off = z2_power_off;
-}
-
-MACHINE_START(ZIPIT2, "Zipit Z2")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= z2_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/z2.h b/arch/arm/mach-pxa/z2.h
deleted file mode 100644
index a78b2e28b1db..000000000000
--- a/arch/arm/mach-pxa/z2.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  arch/arm/mach-pxa/include/mach/z2.h
- *
- *  Author: Ken McGuire
- *  Created: Feb 6, 2009
- */
-
-#ifndef ASM_ARCH_ZIPIT2_H
-#define ASM_ARCH_ZIPIT2_H
-
-/* LEDs */
-#define	GPIO10_ZIPITZ2_LED_WIFI		10
-#define	GPIO85_ZIPITZ2_LED_CHARGED	85
-#define	GPIO83_ZIPITZ2_LED_CHARGING	83
-
-/* SD/MMC */
-#define	GPIO96_ZIPITZ2_SD_DETECT	96
-
-/* GPIO Buttons */
-#define	GPIO1_ZIPITZ2_POWER_BUTTON	1
-#define	GPIO98_ZIPITZ2_LID_BUTTON	98
-
-/* Libertas GSPI8686 WiFi */
-#define	GPIO14_ZIPITZ2_WIFI_POWER	14
-#define	GPIO24_ZIPITZ2_WIFI_CS		24
-#define	GPIO36_ZIPITZ2_WIFI_IRQ		36
-
-/* LCD */
-#define	GPIO19_ZIPITZ2_LCD_RESET	19
-#define	GPIO88_ZIPITZ2_LCD_CS		88
-
-/* MISC GPIOs */
-#define	GPIO0_ZIPITZ2_AC_DETECT		0
-#define GPIO37_ZIPITZ2_HEADSET_DETECT	37
-
-#endif
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
deleted file mode 100644
index ff0d8bb9f557..000000000000
--- a/arch/arm/mach-pxa/zeus.c
+++ /dev/null
@@ -1,974 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Support for the Arcom ZEUS.
- *
- *  Copyright (C) 2006 Arcom Control Systems Ltd.
- *
- *  Loosely based on Arcom's 2.6.16.28.
- *  Maintained by Marc Zyngier <maz@misterjones.org>
- */
-
-#include <linux/cpufreq.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/irq.h>
-#include <linux/pm.h>
-#include <linux/property.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/serial_8250.h>
-#include <linux/dm9000.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/apm-emulation.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/suspend.h>
-#include <asm/system_info.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include "devices.h"
-#include "regs-uart.h"
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include "pxa27x-udc.h"
-#include "udc.h"
-#include <linux/platform_data/video-pxafb.h>
-#include "pm.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "viper-pcmcia.h"
-#include "zeus.h"
-#include "smemc.h"
-
-#include "generic.h"
-
-/*
- * Interrupt handling
- */
-
-static unsigned long zeus_irq_enabled_mask;
-static const int zeus_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, };
-static const int zeus_isa_irq_map[] = {
-	0,		/* ISA irq #0, invalid */
-	0,		/* ISA irq #1, invalid */
-	0,		/* ISA irq #2, invalid */
-	1 << 0,		/* ISA irq #3 */
-	1 << 1,		/* ISA irq #4 */
-	1 << 2,		/* ISA irq #5 */
-	1 << 3,		/* ISA irq #6 */
-	1 << 4,		/* ISA irq #7 */
-	0,		/* ISA irq #8, invalid */
-	0,		/* ISA irq #9, invalid */
-	1 << 5,		/* ISA irq #10 */
-	1 << 6,		/* ISA irq #11 */
-	1 << 7,		/* ISA irq #12 */
-};
-
-static inline int zeus_irq_to_bitmask(unsigned int irq)
-{
-	return zeus_isa_irq_map[irq - PXA_ISA_IRQ(0)];
-}
-
-static inline int zeus_bit_to_irq(int bit)
-{
-	return zeus_isa_irqs[bit] + PXA_ISA_IRQ(0);
-}
-
-static void zeus_ack_irq(struct irq_data *d)
-{
-	__raw_writew(zeus_irq_to_bitmask(d->irq), ZEUS_CPLD_ISA_IRQ);
-}
-
-static void zeus_mask_irq(struct irq_data *d)
-{
-	zeus_irq_enabled_mask &= ~(zeus_irq_to_bitmask(d->irq));
-}
-
-static void zeus_unmask_irq(struct irq_data *d)
-{
-	zeus_irq_enabled_mask |= zeus_irq_to_bitmask(d->irq);
-}
-
-static inline unsigned long zeus_irq_pending(void)
-{
-	return __raw_readw(ZEUS_CPLD_ISA_IRQ) & zeus_irq_enabled_mask;
-}
-
-static void zeus_irq_handler(struct irq_desc *desc)
-{
-	unsigned int irq;
-	unsigned long pending;
-
-	pending = zeus_irq_pending();
-	do {
-		/* we're in a chained irq handler,
-		 * so ack the interrupt by hand */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-		if (likely(pending)) {
-			irq = zeus_bit_to_irq(__ffs(pending));
-			generic_handle_irq(irq);
-		}
-		pending = zeus_irq_pending();
-	} while (pending);
-}
-
-static struct irq_chip zeus_irq_chip = {
-	.name		= "ISA",
-	.irq_ack	= zeus_ack_irq,
-	.irq_mask	= zeus_mask_irq,
-	.irq_unmask	= zeus_unmask_irq,
-};
-
-static void __init zeus_init_irq(void)
-{
-	int level;
-	int isa_irq;
-
-	pxa27x_init_irq();
-
-	/* Peripheral IRQs. It would be nice to move those inside driver
-	   configuration, but it is not supported at the moment. */
-	irq_set_irq_type(gpio_to_irq(ZEUS_AC97_GPIO), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(ZEUS_WAKEUP_GPIO), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(ZEUS_PTT_GPIO), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(ZEUS_EXTGPIO_GPIO),
-			 IRQ_TYPE_EDGE_FALLING);
-	irq_set_irq_type(gpio_to_irq(ZEUS_CAN_GPIO), IRQ_TYPE_EDGE_FALLING);
-
-	/* Setup ISA IRQs */
-	for (level = 0; level < ARRAY_SIZE(zeus_isa_irqs); level++) {
-		isa_irq = zeus_bit_to_irq(level);
-		irq_set_chip_and_handler(isa_irq, &zeus_irq_chip,
-					 handle_edge_irq);
-		irq_clear_status_flags(isa_irq, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
-
-	irq_set_irq_type(gpio_to_irq(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING);
-	irq_set_chained_handler(gpio_to_irq(ZEUS_ISA_GPIO), zeus_irq_handler);
-}
-
-
-/*
- * Platform devices
- */
-
-/* Flash */
-static struct resource zeus_mtd_resources[] = {
-	[0] = { /* NOR Flash (up to 64MB) */
-		.start	= ZEUS_FLASH_PHYS,
-		.end	= ZEUS_FLASH_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = { /* SRAM */
-		.start	= ZEUS_SRAM_PHYS,
-		.end	= ZEUS_SRAM_PHYS + SZ_512K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct physmap_flash_data zeus_flash_data[] = {
-	[0] = {
-		.width		= 2,
-		.parts		= NULL,
-		.nr_parts	= 0,
-	},
-};
-
-static struct platform_device zeus_mtd_devices[] = {
-	[0] = {
-		.name		= "physmap-flash",
-		.id		= 0,
-		.dev		= {
-			.platform_data = &zeus_flash_data[0],
-		},
-		.resource	= &zeus_mtd_resources[0],
-		.num_resources	= 1,
-	},
-};
-
-/* Serial */
-static struct resource zeus_serial_resources[] = {
-	{
-		.start	= 0x10000000,
-		.end	= 0x1000000f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x10800000,
-		.end	= 0x1080000f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x11000000,
-		.end	= 0x1100000f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40100000,
-		.end	= 0x4010001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40200000,
-		.end	= 0x4020001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40700000,
-		.end	= 0x4070001f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	/* External UARTs */
-	/* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */
-	{ /* COM1 */
-		.mapbase	= 0x10000000,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTA_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 1,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* COM2 */
-		.mapbase	= 0x10800000,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTB_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 1,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* COM3 */
-		.mapbase	= 0x11000000,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTC_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 1,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* COM4 */
-		.mapbase	= 0x11800000,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTD_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 1,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	/* Internal UARTs */
-	{ /* FFUART */
-		.membase	= (void *)&FFUART,
-		.mapbase	= __PREG(FFUART),
-		.irq		= IRQ_FFUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* BTUART */
-		.membase	= (void *)&BTUART,
-		.mapbase	= __PREG(BTUART),
-		.irq		= IRQ_BTUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* STUART */
-		.membase	= (void *)&STUART,
-		.mapbase	= __PREG(STUART),
-		.irq		= IRQ_STUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ },
-};
-
-static struct platform_device zeus_serial_device = {
-	.name = "serial8250",
-	.id   = PLAT8250_DEV_PLATFORM,
-	.dev  = {
-		.platform_data = serial_platform_data,
-	},
-	.num_resources	= ARRAY_SIZE(zeus_serial_resources),
-	.resource	= zeus_serial_resources,
-};
-
-/* Ethernet */
-static struct resource zeus_dm9k0_resource[] = {
-	[0] = {
-		.start = ZEUS_ETH0_PHYS,
-		.end   = ZEUS_ETH0_PHYS + 1,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = ZEUS_ETH0_PHYS + 2,
-		.end   = ZEUS_ETH0_PHYS + 3,
-		.flags = IORESOURCE_MEM
-	},
-	[2] = {
-		.start = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
-		.end   = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct resource zeus_dm9k1_resource[] = {
-	[0] = {
-		.start = ZEUS_ETH1_PHYS,
-		.end   = ZEUS_ETH1_PHYS + 1,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = ZEUS_ETH1_PHYS + 2,
-		.end   = ZEUS_ETH1_PHYS + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
-		.end   = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct dm9000_plat_data zeus_dm9k_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY,
-};
-
-static struct platform_device zeus_dm9k0_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(zeus_dm9k0_resource),
-	.resource	= zeus_dm9k0_resource,
-	.dev		= {
-		.platform_data = &zeus_dm9k_platdata,
-	}
-};
-
-static struct platform_device zeus_dm9k1_device = {
-	.name		= "dm9000",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(zeus_dm9k1_resource),
-	.resource	= zeus_dm9k1_resource,
-	.dev		= {
-		.platform_data = &zeus_dm9k_platdata,
-	}
-};
-
-/* External SRAM */
-static struct resource zeus_sram_resource = {
-	.start		= ZEUS_SRAM_PHYS,
-	.end		= ZEUS_SRAM_PHYS + ZEUS_SRAM_SIZE * 2 - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device zeus_sram_device = {
-	.name		= "pxa2xx-8bit-sram",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &zeus_sram_resource,
-};
-
-/* SPI interface on SSP3 */
-static struct pxa2xx_spi_controller pxa2xx_spi_ssp3_master_info = {
-	.num_chipselect = 1,
-	.enable_dma     = 1,
-};
-
-/* CAN bus on SPI */
-static struct regulator_consumer_supply can_regulator_consumer =
-	REGULATOR_SUPPLY("vdd", "spi3.0");
-
-static struct regulator_init_data can_regulator_init_data = {
-	.constraints	= {
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.consumer_supplies	= &can_regulator_consumer,
-	.num_consumer_supplies	= 1,
-};
-
-static struct fixed_voltage_config can_regulator_pdata = {
-	.supply_name	= "CAN_SHDN",
-	.microvolts	= 3300000,
-	.init_data	= &can_regulator_init_data,
-};
-
-static struct platform_device can_regulator_device = {
-	.name	= "reg-fixed-voltage",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &can_regulator_pdata,
-	},
-};
-
-static struct gpiod_lookup_table can_regulator_gpiod_table = {
-	.dev_id = "reg-fixed-voltage.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", ZEUS_CAN_SHDN_GPIO,
-			    NULL, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static const struct property_entry mcp251x_properties[] = {
-	PROPERTY_ENTRY_U32("clock-frequency", 16000000),
-	{}
-};
-
-static const struct software_node mcp251x_node = {
-	.properties = mcp251x_properties,
-};
-
-static struct spi_board_info zeus_spi_board_info[] = {
-	[0] = {
-		.modalias	= "mcp2515",
-		.swnode		= &mcp251x_node,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_CAN_GPIO),
-		.max_speed_hz	= 1*1000*1000,
-		.bus_num	= 3,
-		.mode		= SPI_MODE_0,
-		.chip_select	= 0,
-	},
-};
-
-/* Leds */
-static struct gpio_led zeus_leds[] = {
-	[0] = {
-		.name		 = "zeus:yellow:1",
-		.default_trigger = "heartbeat",
-		.gpio		 = ZEUS_EXT0_GPIO(3),
-		.active_low	 = 1,
-	},
-	[1] = {
-		.name		 = "zeus:yellow:2",
-		.default_trigger = "default-on",
-		.gpio		 = ZEUS_EXT0_GPIO(4),
-		.active_low	 = 1,
-	},
-	[2] = {
-		.name		 = "zeus:yellow:3",
-		.default_trigger = "default-on",
-		.gpio		 = ZEUS_EXT0_GPIO(5),
-		.active_low	 = 1,
-	},
-};
-
-static struct gpio_led_platform_data zeus_leds_info = {
-	.leds		= zeus_leds,
-	.num_leds	= ARRAY_SIZE(zeus_leds),
-};
-
-static struct platform_device zeus_leds_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &zeus_leds_info,
-	},
-};
-
-static void zeus_cf_reset(int state)
-{
-	u16 cpld_state = __raw_readw(ZEUS_CPLD_CONTROL);
-
-	if (state)
-		cpld_state |= ZEUS_CPLD_CONTROL_CF_RST;
-	else
-		cpld_state &= ~ZEUS_CPLD_CONTROL_CF_RST;
-
-	__raw_writew(cpld_state, ZEUS_CPLD_CONTROL);
-}
-
-static struct arcom_pcmcia_pdata zeus_pcmcia_info = {
-	.cd_gpio	= ZEUS_CF_CD_GPIO,
-	.rdy_gpio	= ZEUS_CF_RDY_GPIO,
-	.pwr_gpio	= ZEUS_CF_PWEN_GPIO,
-	.reset		= zeus_cf_reset,
-};
-
-static struct platform_device zeus_pcmcia_device = {
-	.name		= "zeus-pcmcia",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &zeus_pcmcia_info,
-	},
-};
-
-static struct resource zeus_max6369_resource = {
-	.start		= ZEUS_CPLD_EXTWDOG_PHYS,
-	.end		= ZEUS_CPLD_EXTWDOG_PHYS,
-	.flags		= IORESOURCE_MEM,
-};
-
-struct platform_device zeus_max6369_device = {
-	.name		= "max6369_wdt",
-	.id		= -1,
-	.resource	= &zeus_max6369_resource,
-	.num_resources	= 1,
-};
-
-/* AC'97 */
-static pxa2xx_audio_ops_t zeus_ac97_info = {
-	.reset_gpio = 95,
-};
-
-
-/*
- * USB host
- */
-
-static struct regulator_consumer_supply zeus_ohci_regulator_supplies[] = {
-	REGULATOR_SUPPLY("vbus2", "pxa27x-ohci"),
-};
-
-static struct regulator_init_data zeus_ohci_regulator_data = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(zeus_ohci_regulator_supplies),
-	.consumer_supplies	= zeus_ohci_regulator_supplies,
-};
-
-static struct fixed_voltage_config zeus_ohci_regulator_config = {
-	.supply_name		= "vbus2",
-	.microvolts		= 5000000, /* 5.0V */
-	.startup_delay		= 0,
-	.init_data		= &zeus_ohci_regulator_data,
-};
-
-static struct platform_device zeus_ohci_regulator_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &zeus_ohci_regulator_config,
-	},
-};
-
-static struct gpiod_lookup_table zeus_ohci_regulator_gpiod_table = {
-	.dev_id = "reg-fixed-voltage.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", ZEUS_USB2_PWREN_GPIO,
-			    NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct pxaohci_platform_data zeus_ohci_platform_data = {
-	.port_mode	= PMM_NPS_MODE,
-	/* Clear Power Control Polarity Low and set Power Sense
-	 * Polarity Low. Supply power to USB ports. */
-	.flags		= ENABLE_PORT_ALL | POWER_SENSE_LOW,
-};
-
-static void __init zeus_register_ohci(void)
-{
-	/* Port 2 is shared between host and client interface. */
-	UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
-
-	pxa_set_ohci_info(&zeus_ohci_platform_data);
-}
-
-/*
- * Flat Panel
- */
-
-static void zeus_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	gpio_set_value(ZEUS_LCD_EN_GPIO, on);
-}
-
-static void zeus_backlight_power(int on)
-{
-	gpio_set_value(ZEUS_BKLEN_GPIO, on);
-}
-
-static int zeus_setup_fb_gpios(void)
-{
-	int err;
-
-	if ((err = gpio_request(ZEUS_LCD_EN_GPIO, "LCD_EN")))
-		goto out_err;
-
-	if ((err = gpio_direction_output(ZEUS_LCD_EN_GPIO, 0)))
-		goto out_err_lcd;
-
-	if ((err = gpio_request(ZEUS_BKLEN_GPIO, "BKLEN")))
-		goto out_err_lcd;
-
-	if ((err = gpio_direction_output(ZEUS_BKLEN_GPIO, 0)))
-		goto out_err_bkl;
-
-	return 0;
-
-out_err_bkl:
-	gpio_free(ZEUS_BKLEN_GPIO);
-out_err_lcd:
-	gpio_free(ZEUS_LCD_EN_GPIO);
-out_err:
-	return err;
-}
-
-static struct pxafb_mode_info zeus_fb_mode_info[] = {
-	{
-		.pixclock       = 39722,
-
-		.xres           = 640,
-		.yres           = 480,
-
-		.bpp            = 16,
-
-		.hsync_len      = 63,
-		.left_margin    = 16,
-		.right_margin   = 81,
-
-		.vsync_len      = 2,
-		.upper_margin   = 12,
-		.lower_margin   = 31,
-
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info zeus_fb_info = {
-	.modes			= zeus_fb_mode_info,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= zeus_lcd_power,
-	.pxafb_backlight_power	= zeus_backlight_power,
-};
-
-/*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-
-static struct pxamci_platform_data zeus_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay_ms	= 250,
-	.gpio_card_ro_invert	= 1,
-};
-
-static struct gpiod_lookup_table zeus_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", ZEUS_MMC_CD_GPIO,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", ZEUS_MMC_WP_GPIO,
-			    "wp", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/*
- * USB Device Controller
- */
-static void zeus_udc_command(int cmd)
-{
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		pr_info("zeus: disconnecting USB client\n");
-		UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
-		break;
-
-	case PXA2XX_UDC_CMD_CONNECT:
-		pr_info("zeus: connecting USB client\n");
-		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
-		break;
-	}
-}
-
-static struct pxa2xx_udc_mach_info zeus_udc_info = {
-	.udc_command = zeus_udc_command,
-};
-
-static struct platform_device *zeus_devices[] __initdata = {
-	&zeus_serial_device,
-	&zeus_mtd_devices[0],
-	&zeus_dm9k0_device,
-	&zeus_dm9k1_device,
-	&zeus_sram_device,
-	&zeus_leds_device,
-	&zeus_pcmcia_device,
-	&zeus_max6369_device,
-	&can_regulator_device,
-	&zeus_ohci_regulator_device,
-};
-
-#ifdef CONFIG_PM
-static void zeus_power_off(void)
-{
-	local_irq_disable();
-	cpu_suspend(PWRMODE_DEEPSLEEP, pxa27x_finish_suspend);
-}
-#else
-#define zeus_power_off   NULL
-#endif
-
-#ifdef CONFIG_APM_EMULATION
-static void zeus_get_power_status(struct apm_power_info *info)
-{
-	/* Power supply is always present */
-	info->ac_line_status	= APM_AC_ONLINE;
-	info->battery_status	= APM_BATTERY_STATUS_NOT_PRESENT;
-	info->battery_flag	= APM_BATTERY_FLAG_NOT_PRESENT;
-}
-
-static inline void zeus_setup_apm(void)
-{
-	apm_get_power_status = zeus_get_power_status;
-}
-#else
-static inline void zeus_setup_apm(void)
-{
-}
-#endif
-
-static int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
-			     unsigned ngpio, void *context)
-{
-	int i;
-	u8 pcb_info = 0;
-
-	for (i = 0; i < 8; i++) {
-		int pcb_bit = gpio + i + 8;
-
-		if (gpio_request(pcb_bit, "pcb info")) {
-			dev_err(&client->dev, "Can't request pcb info %d\n", i);
-			continue;
-		}
-
-		if (gpio_direction_input(pcb_bit)) {
-			dev_err(&client->dev, "Can't read pcb info %d\n", i);
-			gpio_free(pcb_bit);
-			continue;
-		}
-
-		pcb_info |= !!gpio_get_value(pcb_bit) << i;
-
-		gpio_free(pcb_bit);
-	}
-
-	dev_info(&client->dev, "Zeus PCB version %d issue %d\n",
-		 pcb_info >> 4, pcb_info & 0xf);
-
-	return 0;
-}
-
-static struct pca953x_platform_data zeus_pca953x_pdata[] = {
-	[0] = { .gpio_base	= ZEUS_EXT0_GPIO_BASE, },
-	[1] = {
-		.gpio_base	= ZEUS_EXT1_GPIO_BASE,
-		.setup		= zeus_get_pcb_info,
-	},
-	[2] = { .gpio_base = ZEUS_USER_GPIO_BASE, },
-};
-
-static struct i2c_board_info __initdata zeus_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pca9535",	0x21),
-		.platform_data	= &zeus_pca953x_pdata[0],
-	},
-	{
-		I2C_BOARD_INFO("pca9535",	0x22),
-		.platform_data	= &zeus_pca953x_pdata[1],
-	},
-	{
-		I2C_BOARD_INFO("pca9535",	0x20),
-		.platform_data	= &zeus_pca953x_pdata[2],
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_EXTGPIO_GPIO),
-	},
-	{ I2C_BOARD_INFO("lm75a",	0x48) },
-	{ I2C_BOARD_INFO("24c01",	0x50) },
-	{ I2C_BOARD_INFO("isl1208",	0x6f) },
-};
-
-static mfp_cfg_t zeus_pin_config[] __initdata = {
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,
-
-	GPIO22_GPIO,
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	GPIO119_USBH2_PWR,
-	GPIO120_USBH2_PEN,
-
-	GPIO86_LCD_LDD_16,
-	GPIO87_LCD_LDD_17,
-
-	GPIO102_GPIO,
-	GPIO104_CIF_DD_2,
-	GPIO105_CIF_DD_1,
-
-	GPIO81_SSP3_TXD,
-	GPIO82_SSP3_RXD,
-	GPIO83_SSP3_SFRM,
-	GPIO84_SSP3_SCLK,
-
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO36_GPIO,		/* CF CD */
-	GPIO97_GPIO,		/* CF PWREN */
-	GPIO99_GPIO,		/* CF RDY */
-};
-
-/*
- * DM9k MSCx settings:	SRAM, 16 bits
- *			17 cycles delay first access
- *			 5 cycles delay next access
- *			13 cycles recovery time
- *			faster device
- */
-#define DM9K_MSC_VALUE		0xe4c9
-
-static void __init zeus_init(void)
-{
-	u16 dm9000_msc = DM9K_MSC_VALUE;
-	u32 msc0, msc1;
-
-	system_rev = __raw_readw(ZEUS_CPLD_VERSION);
-	pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
-
-	/* Fix timings for dm9000s (CS1/CS2)*/
-	msc0 = (__raw_readl(MSC0) & 0x0000ffff) | (dm9000_msc << 16);
-	msc1 = (__raw_readl(MSC1) & 0xffff0000) | dm9000_msc;
-	__raw_writel(msc0, MSC0);
-	__raw_writel(msc1, MSC1);
-
-	pm_power_off = zeus_power_off;
-	zeus_setup_apm();
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
-
-	gpiod_add_lookup_table(&can_regulator_gpiod_table);
-	gpiod_add_lookup_table(&zeus_ohci_regulator_gpiod_table);
-	platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices));
-
-	zeus_register_ohci();
-
-	if (zeus_setup_fb_gpios())
-		pr_err("Failed to setup fb gpios\n");
-	else
-		pxa_set_fb_info(NULL, &zeus_fb_info);
-
-	gpiod_add_lookup_table(&zeus_mci_gpio_table);
-	pxa_set_mci_info(&zeus_mci_platform_data);
-	pxa_set_udc_info(&zeus_udc_info);
-	pxa_set_ac97_info(&zeus_ac97_info);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
-	pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info);
-	spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info));
-
-	regulator_has_full_constraints();
-}
-
-static struct map_desc zeus_io_desc[] __initdata = {
-	{
-		.virtual = (unsigned long)ZEUS_CPLD_VERSION,
-		.pfn     = __phys_to_pfn(ZEUS_CPLD_VERSION_PHYS),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)ZEUS_CPLD_ISA_IRQ,
-		.pfn     = __phys_to_pfn(ZEUS_CPLD_ISA_IRQ_PHYS),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)ZEUS_CPLD_CONTROL,
-		.pfn     = __phys_to_pfn(ZEUS_CPLD_CONTROL_PHYS),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)ZEUS_PC104IO,
-		.pfn     = __phys_to_pfn(ZEUS_PC104IO_PHYS),
-		.length  = 0x00800000,
-		.type    = MT_DEVICE,
-	},
-	{
-		/*
-		 * ISA I/O space mapping:
-		 * -  ports 0x0000-0x0fff are PC/104
-		 * -  ports 0x10000-0x10fff are PCMCIA slot 1
-		 * -  ports 0x11000-0x11fff are PC/104
-		 */
-		.virtual = PCI_IO_VIRT_BASE,
-		.pfn     = __phys_to_pfn(ZEUS_PC104IO_PHYS),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-};
-
-static void __init zeus_map_io(void)
-{
-	pxa27x_map_io();
-
-	iotable_init(zeus_io_desc, ARRAY_SIZE(zeus_io_desc));
-
-	/* Clear PSPR to ensure a full restart on wake-up. */
-	PMCR = PSPR = 0;
-
-	/* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */
-	writel(readl(OSCC) | OSCC_OON, OSCC);
-
-	/* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...).
-	 * float chip selects and PCMCIA */
-	PCFR = PCFR_OPDE | PCFR_DC_EN | PCFR_FS | PCFR_FP;
-}
-
-MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
-	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.atag_offset	= 0x100,
-	.map_io		= zeus_map_io,
-	.nr_irqs	= ZEUS_NR_IRQS,
-	.init_irq	= zeus_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= zeus_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/zeus.h b/arch/arm/mach-pxa/zeus.h
deleted file mode 100644
index 8fa6b2923f63..000000000000
--- a/arch/arm/mach-pxa/zeus.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  arch/arm/mach-pxa/include/mach/zeus.h
- *
- *  Author:	David Vrabel
- *  Created:	Sept 28, 2005
- *  Copyright:	Arcom Control Systems Ltd.
- *
- *  Maintained by: Marc Zyngier <maz@misterjones.org>
- */
-
-#ifndef _MACH_ZEUS_H
-#define _MACH_ZEUS_H
-
-#define ZEUS_NR_IRQS		(IRQ_BOARD_START + 48)
-
-/* Physical addresses */
-#define ZEUS_FLASH_PHYS		PXA_CS0_PHYS
-#define ZEUS_ETH0_PHYS		PXA_CS1_PHYS
-#define ZEUS_ETH1_PHYS		PXA_CS2_PHYS
-#define ZEUS_CPLD_PHYS		(PXA_CS4_PHYS+0x2000000)
-#define ZEUS_SRAM_PHYS		PXA_CS5_PHYS
-#define ZEUS_PC104IO_PHYS	(0x30000000)
-
-#define ZEUS_CPLD_VERSION_PHYS	(ZEUS_CPLD_PHYS + 0x00000000)
-#define ZEUS_CPLD_ISA_IRQ_PHYS	(ZEUS_CPLD_PHYS + 0x00800000)
-#define ZEUS_CPLD_CONTROL_PHYS	(ZEUS_CPLD_PHYS + 0x01000000)
-#define ZEUS_CPLD_EXTWDOG_PHYS	(ZEUS_CPLD_PHYS + 0x01800000)
-
-/* GPIOs */
-#define ZEUS_AC97_GPIO		0
-#define ZEUS_WAKEUP_GPIO	1
-#define ZEUS_UARTA_GPIO		9
-#define ZEUS_UARTB_GPIO		10
-#define ZEUS_UARTC_GPIO		12
-#define ZEUS_UARTD_GPIO		11
-#define ZEUS_ETH0_GPIO		14
-#define ZEUS_ISA_GPIO		17
-#define ZEUS_BKLEN_GPIO		19
-#define ZEUS_USB2_PWREN_GPIO	22
-#define ZEUS_PTT_GPIO		27
-#define ZEUS_CF_CD_GPIO         35
-#define ZEUS_MMC_WP_GPIO        52
-#define ZEUS_MMC_CD_GPIO        53
-#define ZEUS_EXTGPIO_GPIO	91
-#define ZEUS_CF_PWEN_GPIO       97
-#define ZEUS_CF_RDY_GPIO        99
-#define ZEUS_LCD_EN_GPIO	101
-#define ZEUS_ETH1_GPIO		113
-#define ZEUS_CAN_GPIO		116
-
-#define ZEUS_EXT0_GPIO_BASE	128
-#define ZEUS_EXT1_GPIO_BASE	160
-#define ZEUS_USER_GPIO_BASE	192
-
-#define ZEUS_EXT0_GPIO(x)	(ZEUS_EXT0_GPIO_BASE + (x))
-#define ZEUS_EXT1_GPIO(x)	(ZEUS_EXT1_GPIO_BASE + (x))
-#define ZEUS_USER_GPIO(x)	(ZEUS_USER_GPIO_BASE + (x))
-
-#define	ZEUS_CAN_SHDN_GPIO	ZEUS_EXT1_GPIO(2)
-
-/*
- * CPLD registers:
- * Only 4 registers, but spread over a 32MB address space.
- * Be gentle, and remap that over 32kB...
- */
-
-#define ZEUS_CPLD		IOMEM(0xf0000000)
-#define ZEUS_CPLD_VERSION	(ZEUS_CPLD + 0x0000)
-#define ZEUS_CPLD_ISA_IRQ	(ZEUS_CPLD + 0x1000)
-#define ZEUS_CPLD_CONTROL	(ZEUS_CPLD + 0x2000)
-
-/* CPLD register bits */
-#define ZEUS_CPLD_CONTROL_CF_RST        0x01
-
-#define ZEUS_PC104IO		IOMEM(0xf1000000)
-
-#define ZEUS_SRAM_SIZE		(256 * 1024)
-
-#endif
-
-
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
deleted file mode 100644
index 8ed75ac29b1a..000000000000
--- a/arch/arm/mach-pxa/zylonite.c
+++ /dev/null
@@ -1,495 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/zylonite.c
- *
- * Support for the PXA3xx Development Platform (aka Zylonite)
- *
- * Copyright (C) 2006 Marvell International Ltd.
- *
- * 2007-09-04: eric miao <eric.miao@marvell.com>
- *             rewrite to align with latest kernel
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/machine.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/smc91x.h>
-#include <linux/soc/pxa/cpu.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "pxa3xx.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/video-pxafb.h>
-#include "zylonite.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-#include "mfp.h"
-
-#include "devices.h"
-#include "generic.h"
-
-int gpio_eth_irq;
-int gpio_debug_led1;
-int gpio_debug_led2;
-
-int wm9713_irq;
-
-int lcd_id;
-int lcd_orientation;
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= ZYLONITE_ETH_PHYS + 0x300,
-		.end	= ZYLONITE_ETH_PHYS + 0xfffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= -1,	/* for run-time assignment */
-		.end	= -1,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata zylonite_smc91x_info = {
-	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
-		  SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &zylonite_smc91x_info,
-	},
-};
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led zylonite_debug_leds[] = {
-	[0] = {
-		.name			= "zylonite:yellow:1",
-		.default_trigger	= "heartbeat",
-	},
-	[1] = {
-		.name			= "zylonite:yellow:2",
-		.default_trigger	= "default-on",
-	},
-};
-
-static struct gpio_led_platform_data zylonite_debug_leds_info = {
-	.leds		= zylonite_debug_leds,
-	.num_leds	= ARRAY_SIZE(zylonite_debug_leds),
-};
-
-static struct platform_device zylonite_device_leds = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &zylonite_debug_leds_info,
-	}
-};
-
-static void __init zylonite_init_leds(void)
-{
-	zylonite_debug_leds[0].gpio = gpio_debug_led1;
-	zylonite_debug_leds[1].gpio = gpio_debug_led2;
-
-	platform_device_register(&zylonite_device_leds);
-}
-#else
-static inline void zylonite_init_leds(void) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pwm_lookup zylonite_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.1", 1, "pwm-backlight.0", NULL, 10000,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data zylonite_backlight_data = {
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-};
-
-static struct platform_device zylonite_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm1.dev,
-		.platform_data	= &zylonite_backlight_data,
-	},
-};
-
-static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
-	.pixclock		= 110000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 4,
-	.left_margin		= 6,
-	.right_margin		= 4,
-	.vsync_len		= 2,
-	.upper_margin		= 2,
-	.lower_margin		= 3,
-	.sync			= FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
-	.pixclock		= 50000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 1,
-	.left_margin		= 0x9f,
-	.right_margin		= 1,
-	.vsync_len		= 44,
-	.upper_margin		= 0,
-	.lower_margin		= 0,
-	.sync			= FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info zylonite_toshiba_lcd_info = {
-	.num_modes      	= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static struct pxafb_mode_info sharp_ls037_modes[] = {
-	[0] = {
-		.pixclock	= 158000,
-		.xres		= 240,
-		.yres		= 320,
-		.bpp		= 16,
-		.hsync_len	= 4,
-		.left_margin	= 39,
-		.right_margin	= 39,
-		.vsync_len	= 1,
-		.upper_margin	= 2,
-		.lower_margin	= 3,
-		.sync		= 0,
-	},
-	[1] = {
-		.pixclock	= 39700,
-		.xres		= 480,
-		.yres		= 640,
-		.bpp		= 16,
-		.hsync_len	= 8,
-		.left_margin	= 81,
-		.right_margin	= 81,
-		.vsync_len	= 1,
-		.upper_margin	= 2,
-		.lower_margin	= 7,
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info zylonite_sharp_lcd_info = {
-	.modes			= sharp_ls037_modes,
-	.num_modes		= 2,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init zylonite_init_lcd(void)
-{
-	pwm_add_table(zylonite_pwm_lookup, ARRAY_SIZE(zylonite_pwm_lookup));
-	platform_device_register(&zylonite_backlight_device);
-
-	if (lcd_id & 0x20) {
-		pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info);
-		return;
-	}
-
-	/* legacy LCD panels, it would be handy here if LCD panel type can
-	 * be decided at run-time
-	 */
-	if (1)
-		zylonite_toshiba_lcd_info.modes = &toshiba_ltm035a776c_mode;
-	else
-		zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
-
-	pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info);
-}
-#else
-static inline void zylonite_init_lcd(void) {}
-#endif
-
-#if defined(CONFIG_MMC)
-static struct pxamci_platform_data zylonite_mci_platform_data = {
-	.detect_delay_ms= 200,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-#define PCA9539A_MCI_CD 0
-#define PCA9539A_MCI1_CD 1
-#define PCA9539A_MCI_WP 2
-#define PCA9539A_MCI1_WP 3
-#define PCA9539A_MCI3_CD 30
-#define PCA9539A_MCI3_WP 31
-
-static struct gpiod_lookup_table zylonite_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("i2c-pca9539-a", PCA9539A_MCI_CD,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("i2c-pca9539-a", PCA9539A_MCI_WP,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct pxamci_platform_data zylonite_mci2_platform_data = {
-	.detect_delay_ms= 200,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table zylonite_mci2_gpio_table = {
-	.dev_id = "pxa2xx-mci.1",
-	.table = {
-		GPIO_LOOKUP("i2c-pca9539-a", PCA9539A_MCI1_CD,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("i2c-pca9539-a", PCA9539A_MCI1_WP,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct pxamci_platform_data zylonite_mci3_platform_data = {
-	.detect_delay_ms= 200,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table zylonite_mci3_gpio_table = {
-	.dev_id = "pxa2xx-mci.2",
-	.table = {
-		GPIO_LOOKUP("i2c-pca9539-a", PCA9539A_MCI3_CD,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("i2c-pca9539-a", PCA9539A_MCI3_WP,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init zylonite_init_mmc(void)
-{
-	gpiod_add_lookup_table(&zylonite_mci_gpio_table);
-	pxa_set_mci_info(&zylonite_mci_platform_data);
-	gpiod_add_lookup_table(&zylonite_mci2_gpio_table);
-	pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
-	if (cpu_is_pxa310()) {
-		gpiod_add_lookup_table(&zylonite_mci3_gpio_table);
-		pxa3xx_set_mci3_info(&zylonite_mci3_platform_data);
-	}
-}
-#else
-static inline void zylonite_init_mmc(void) {}
-#endif
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int zylonite_matrix_key_map[] = {
-	/* KEY(row, col, key_code) */
-	KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
-	KEY(1, 0, KEY_E), KEY(1, 1, KEY_F), KEY(1, 2, KEY_G), KEY(1, 5, KEY_H),
-	KEY(2, 0, KEY_I), KEY(2, 1, KEY_J), KEY(2, 2, KEY_K), KEY(2, 5, KEY_L),
-	KEY(3, 0, KEY_M), KEY(3, 1, KEY_N), KEY(3, 2, KEY_O), KEY(3, 5, KEY_P),
-	KEY(5, 0, KEY_Q), KEY(5, 1, KEY_R), KEY(5, 2, KEY_S), KEY(5, 5, KEY_T),
-	KEY(6, 0, KEY_U), KEY(6, 1, KEY_V), KEY(6, 2, KEY_W), KEY(6, 5, KEY_X),
-	KEY(7, 1, KEY_Y), KEY(7, 2, KEY_Z),
-
-	KEY(4, 4, KEY_0), KEY(1, 3, KEY_1), KEY(4, 1, KEY_2), KEY(1, 4, KEY_3),
-	KEY(2, 3, KEY_4), KEY(4, 2, KEY_5), KEY(2, 4, KEY_6), KEY(3, 3, KEY_7),
-	KEY(4, 3, KEY_8), KEY(3, 4, KEY_9),
-
-	KEY(4, 5, KEY_SPACE),
-	KEY(5, 3, KEY_KPASTERISK), 	/* * */
-	KEY(5, 4, KEY_KPDOT), 		/* #" */
-
-	KEY(0, 7, KEY_UP),
-	KEY(1, 7, KEY_DOWN),
-	KEY(2, 7, KEY_LEFT),
-	KEY(3, 7, KEY_RIGHT),
-	KEY(2, 6, KEY_HOME),
-	KEY(3, 6, KEY_END),
-	KEY(6, 4, KEY_DELETE),
-	KEY(6, 6, KEY_BACK),
-	KEY(6, 3, KEY_CAPSLOCK),	/* KEY_LEFTSHIFT), */
-
-	KEY(4, 6, KEY_ENTER),		/* scroll push */
-	KEY(5, 7, KEY_ENTER),		/* keypad action */
-
-	KEY(0, 4, KEY_EMAIL),
-	KEY(5, 6, KEY_SEND),
-	KEY(4, 0, KEY_CALENDAR),
-	KEY(7, 6, KEY_RECORD),
-	KEY(6, 7, KEY_VOLUMEUP),
-	KEY(7, 7, KEY_VOLUMEDOWN),
-
-	KEY(0, 6, KEY_F22),	/* soft1 */
-	KEY(1, 6, KEY_F23),	/* soft2 */
-	KEY(0, 3, KEY_AUX),	/* contact */
-};
-
-static struct matrix_keymap_data zylonite_matrix_keymap_data = {
-	.keymap			= zylonite_matrix_key_map,
-	.keymap_size		= ARRAY_SIZE(zylonite_matrix_key_map),
-};
-
-static struct pxa27x_keypad_platform_data zylonite_keypad_info = {
-	.matrix_key_rows	= 8,
-	.matrix_key_cols	= 8,
-	.matrix_keymap_data	= &zylonite_matrix_keymap_data,
-
-	.enable_rotary0		= 1,
-	.rotary0_up_key		= KEY_UP,
-	.rotary0_down_key	= KEY_DOWN,
-
-	.debounce_interval	= 30,
-};
-
-static void __init zylonite_init_keypad(void)
-{
-	pxa_set_keypad_info(&zylonite_keypad_info);
-}
-#else
-static inline void zylonite_init_keypad(void) {}
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-static struct mtd_partition zylonite_nand_partitions[] = {
-	[0] = {
-		.name        = "Bootloader",
-		.offset      = 0,
-		.size        = 0x060000,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[1] = {
-		.name        = "Kernel",
-		.offset      = 0x060000,
-		.size        = 0x200000,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[2] = {
-		.name        = "Filesystem",
-		.offset      = 0x0260000,
-		.size        = 0x3000000,     /* 48M - rootfs */
-	},
-	[3] = {
-		.name        = "MassStorage",
-		.offset      = 0x3260000,
-		.size        = 0x3d40000,
-	},
-	[4] = {
-		.name        = "BBT",
-		.offset      = 0x6FA0000,
-		.size        = 0x80000,
-		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
-	},
-	/* NOTE: we reserve some blocks at the end of the NAND flash for
-	 * bad block management, and the max number of relocation blocks
-	 * differs on different platforms. Please take care with it when
-	 * defining the partition table.
-	 */
-};
-
-static struct pxa3xx_nand_platform_data zylonite_nand_info = {
-	.parts		= zylonite_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(zylonite_nand_partitions),
-};
-
-static void __init zylonite_init_nand(void)
-{
-	pxa3xx_set_nand_info(&zylonite_nand_info);
-}
-#else
-static inline void zylonite_init_nand(void) {}
-#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static struct pxaohci_platform_data zylonite_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
-			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init zylonite_init_ohci(void)
-{
-	pxa_set_ohci_info(&zylonite_ohci_info);
-}
-#else
-static inline void zylonite_init_ohci(void) {}
-#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
-
-static struct gpiod_lookup_table zylonite_wm97xx_touch_gpio15_table = {
-	.dev_id = "wm97xx-touch.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", mfp_to_gpio(MFP_PIN_GPIO15),
-			    "touch", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table zylonite_wm97xx_touch_gpio26_table = {
-	.dev_id = "wm97xx-touch.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", mfp_to_gpio(MFP_PIN_GPIO26),
-			    "touch", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init zylonite_init_wm97xx_touch(void)
-{
-	if (!IS_ENABLED(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE))
-		return;
-
-	if (cpu_is_pxa320())
-		gpiod_add_lookup_table(&zylonite_wm97xx_touch_gpio15_table);
-	else
-		gpiod_add_lookup_table(&zylonite_wm97xx_touch_gpio26_table);
-}
-
-static void __init zylonite_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	/* board-processor specific initialization */
-	zylonite_pxa300_init();
-	zylonite_pxa320_init();
-
-	/*
-	 * Note: We depend that the bootloader set
-	 * the correct value to MSC register for SMC91x.
-	 */
-	smc91x_resources[1].start = PXA_GPIO_TO_IRQ(gpio_eth_irq);
-	smc91x_resources[1].end   = PXA_GPIO_TO_IRQ(gpio_eth_irq);
-	platform_device_register(&smc91x_device);
-
-	pxa_set_ac97_info(NULL);
-	zylonite_init_lcd();
-	zylonite_init_mmc();
-	zylonite_init_keypad();
-	zylonite_init_nand();
-	zylonite_init_leds();
-	zylonite_init_ohci();
-	zylonite_init_wm97xx_touch();
-}
-
-MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= ZYLONITE_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= zylonite_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/zylonite.h b/arch/arm/mach-pxa/zylonite.h
deleted file mode 100644
index afe3efcb8e04..000000000000
--- a/arch/arm/mach-pxa/zylonite.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_ZYLONITE_H
-#define __ASM_ARCH_ZYLONITE_H
-
-#include <linux/soc/pxa/cpu.h>
-
-#define ZYLONITE_ETH_PHYS	0x14000000
-
-#define EXT_GPIO(x)		(128 + (x))
-
-#define ZYLONITE_NR_IRQS	(IRQ_BOARD_START + 32)
-
-/* the following variables are processor specific and initialized
- * by the corresponding zylonite_pxa3xx_init()
- */
-extern int gpio_eth_irq;
-extern int gpio_debug_led1;
-extern int gpio_debug_led2;
-
-extern int wm9713_irq;
-
-extern int lcd_id;
-extern int lcd_orientation;
-
-#ifdef CONFIG_MACH_ZYLONITE300
-extern void zylonite_pxa300_init(void);
-#else
-static inline void zylonite_pxa300_init(void)
-{
-	if (cpu_is_pxa300() || cpu_is_pxa310())
-		panic("%s: PXA300/PXA310 not supported\n", __func__);
-}
-#endif
-
-#ifdef CONFIG_MACH_ZYLONITE320
-extern void zylonite_pxa320_init(void);
-#else
-static inline void zylonite_pxa320_init(void)
-{
-	if (cpu_is_pxa320())
-		panic("%s: PXA320 not supported\n", __func__);
-}
-#endif
-
-#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
deleted file mode 100644
index 50a8a3547dbc..000000000000
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ /dev/null
@@ -1,281 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/zylonite_pxa300.c
- *
- * PXA300/PXA310 specific support code for the
- * PXA3xx Development Platform (aka Zylonite)
- *
- * Copyright (C) 2007 Marvell Internation Ltd.
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/gpio.h>
-#include <linux/soc/pxa/cpu.h>
-
-#include "pxa300.h"
-#include "devices.h"
-#include "zylonite.h"
-
-#include "generic.h"
-
-/* PXA300/PXA310 common configurations */
-static mfp_cfg_t common_mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO70_LCD_LDD_16,
-	GPIO71_LCD_LDD_17,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-	GPIO76_LCD_VSYNC,
-	GPIO127_LCD_CS_N,
-	GPIO20_PWM3_OUT,	/* backlight */
-
-	/* BTUART */
-	GPIO111_UART2_RTS,
-	GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
-	GPIO113_UART2_TXD,
-	GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
-
-	/* STUART */
-	GPIO109_UART3_TXD,
-	GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
-
-	/* AC97 */
-	GPIO23_AC97_nACRESET,
-	GPIO24_AC97_SYSCLK,
-	GPIO29_AC97_BITCLK,
-	GPIO25_AC97_SDATA_IN_0,
-	GPIO27_AC97_SDATA_OUT,
-	GPIO28_AC97_SYNC,
-	GPIO17_GPIO,	/* SDATA_IN_1 but unused - configure to GPIO */
-
-	/* SSP3 */
-	GPIO91_SSP3_SCLK,
-	GPIO92_SSP3_FRM,
-	GPIO93_SSP3_TXD,
-	GPIO94_SSP3_RXD,
-
-	/* WM9713 IRQ */
-	GPIO26_GPIO,
-
-	/* Keypad */
-	GPIO107_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO108_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
-	GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
-	GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
-	GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
-	GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
-	GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
-	GPIO121_KP_MKOUT_0,
-	GPIO122_KP_MKOUT_1,
-	GPIO123_KP_MKOUT_2,
-	GPIO124_KP_MKOUT_3,
-	GPIO125_KP_MKOUT_4,
-	GPIO4_2_KP_MKOUT_5,
-	GPIO5_2_KP_MKOUT_6,
-	GPIO6_2_KP_MKOUT_7,
-
-	/* MMC1 */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,	/* CMD0 for slot 0 */
-	GPIO15_GPIO,	/* CMD1 default as GPIO for slot 0 */
-
-	/* MMC2 */
-	GPIO9_MMC2_DAT0,
-	GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO11_MMC2_DAT2,
-	GPIO12_MMC2_DAT3,
-	GPIO13_MMC2_CLK,
-	GPIO14_MMC2_CMD,
-
-	/* USB Host */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-
-	/* Standard I2C */
-	GPIO21_I2C_SCL,
-	GPIO22_I2C_SDA,
-
-	/* GPIO */
-	GPIO18_GPIO | MFP_PULL_HIGH,	/* GPIO Expander #0 INT_N */
-	GPIO19_GPIO | MFP_PULL_HIGH,	/* GPIO Expander #1 INT_N */
-};
-
-static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
-	/* FFUART */
-	GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
-	GPIO31_UART1_TXD,
-	GPIO32_UART1_CTS,
-	GPIO37_UART1_RTS,
-	GPIO33_UART1_DCD,
-	GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
-	GPIO35_UART1_RI,
-	GPIO36_UART1_DTR,
-
-	/* Ethernet */
-	GPIO2_nCS3,
-	GPIO99_GPIO,
-};
-
-static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
-	/* FFUART */
-	GPIO99_UART1_RXD | MFP_LPM_EDGE_FALL,
-	GPIO100_UART1_TXD,
-	GPIO101_UART1_CTS,
-	GPIO106_UART1_RTS,
-
-	/* Ethernet */
-	GPIO2_nCS3,
-	GPIO102_GPIO,
-
-	/* MMC3 */
-	GPIO7_2_MMC3_DAT0,
-	GPIO8_2_MMC3_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO9_2_MMC3_DAT2,
-	GPIO10_2_MMC3_DAT3,
-	GPIO103_MMC3_CLK,
-	GPIO105_MMC3_CMD,
-};
-
-#define NUM_LCD_DETECT_PINS	7
-
-static int lcd_detect_pins[] __initdata = {
-	MFP_PIN_GPIO71,	/* LCD_LDD_17 - ORIENT */
-	MFP_PIN_GPIO70, /* LCD_LDD_16 - LCDID[5] */
-	MFP_PIN_GPIO75, /* LCD_BIAS   - LCDID[4] */
-	MFP_PIN_GPIO73, /* LCD_LCLK   - LCDID[3] */
-	MFP_PIN_GPIO72, /* LCD_FCLK   - LCDID[2] */
-	MFP_PIN_GPIO127,/* LCD_CS_N   - LCDID[1] */
-	MFP_PIN_GPIO76, /* LCD_VSYNC  - LCDID[0] */
-};
-
-static void __init zylonite_detect_lcd_panel(void)
-{
-	unsigned long mfpr_save[NUM_LCD_DETECT_PINS];
-	int i, gpio, id = 0;
-
-	/* save the original MFP settings of these pins and configure
-	 * them as GPIO Input, DS01X, Pull Neither, Edge Clear
-	 */
-	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
-		mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]);
-		pxa3xx_mfp_write(lcd_detect_pins[i], 0x8440);
-	}
-
-	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
-		id = id << 1;
-		gpio = mfp_to_gpio(lcd_detect_pins[i]);
-		gpio_request(gpio, "LCD_ID_PINS");
-		gpio_direction_input(gpio);
-
-		if (gpio_get_value(gpio))
-			id = id | 0x1;
-		gpio_free(gpio);
-	}
-
-	/* lcd id, flush out bit 1 */
-	lcd_id = id & 0x3d;
-
-	/* lcd orientation, portrait or landscape */
-	lcd_orientation = (id >> 6) & 0x1;
-
-	/* restore the original MFP settings */
-	for (i = 0; i < NUM_LCD_DETECT_PINS; i++)
-		pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
-}
-
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-static struct pca953x_platform_data gpio_exp[] = {
-	[0] = {
-		.gpio_base	= 128,
-	},
-	[1] = {
-		.gpio_base	= 144,
-	},
-};
-
-static struct i2c_board_info zylonite_i2c_board_info[] = {
-	{
-		.type		= "pca9539",
-		.dev_name	= "pca9539-a",
-		.addr		= 0x74,
-		.platform_data	= &gpio_exp[0],
-		.irq		= PXA_GPIO_TO_IRQ(18),
-	}, {
-		.type		= "pca9539",
-		.dev_name	= "pca9539-b",
-		.addr		= 0x75,
-		.platform_data	= &gpio_exp[1],
-		.irq		= PXA_GPIO_TO_IRQ(19),
-	},
-};
-
-static void __init zylonite_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(zylonite_i2c_board_info));
-}
-#else
-static inline void zylonite_init_i2c(void) {}
-#endif
-
-void __init zylonite_pxa300_init(void)
-{
-	if (cpu_is_pxa300() || cpu_is_pxa310()) {
-		/* initialize MFP */
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(common_mfp_cfg));
-
-		/* detect LCD panel */
-		zylonite_detect_lcd_panel();
-
-		/* WM9713 IRQ */
-		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
-
-		zylonite_init_i2c();
-	}
-
-	if (cpu_is_pxa300()) {
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa300_mfp_cfg));
-		gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO99);
-	}
-
-	if (cpu_is_pxa310()) {
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
-		gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
-	}
-
-	/* GPIOs for Debug LEDs */
-	gpio_debug_led1 = EXT_GPIO(25);
-	gpio_debug_led2 = EXT_GPIO(26);
-}
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
deleted file mode 100644
index 67cab4f1194b..000000000000
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/zylonite_pxa320.c
- *
- * PXA320 specific support code for the
- * PXA3xx Development Platform (aka Zylonite)
- *
- * Copyright (C) 2007 Marvell Internation Ltd.
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/soc/pxa/cpu.h>
-
-#include "pxa320.h"
-#include "zylonite.h"
-
-#include "generic.h"
-
-static mfp_cfg_t mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO6_2_LCD_LDD_0,
-	GPIO7_2_LCD_LDD_1,
-	GPIO8_2_LCD_LDD_2,
-	GPIO9_2_LCD_LDD_3,
-	GPIO10_2_LCD_LDD_4,
-	GPIO11_2_LCD_LDD_5,
-	GPIO12_2_LCD_LDD_6,
-	GPIO13_2_LCD_LDD_7,
-	GPIO63_LCD_LDD_8,
-	GPIO64_LCD_LDD_9,
-	GPIO65_LCD_LDD_10,
-	GPIO66_LCD_LDD_11,
-	GPIO67_LCD_LDD_12,
-	GPIO68_LCD_LDD_13,
-	GPIO69_LCD_LDD_14,
-	GPIO70_LCD_LDD_15,
-	GPIO71_LCD_LDD_16,
-	GPIO72_LCD_LDD_17,
-	GPIO73_LCD_CS_N,
-	GPIO74_LCD_VSYNC,
-	GPIO14_2_LCD_FCLK,
-	GPIO15_2_LCD_LCLK,
-	GPIO16_2_LCD_PCLK,
-	GPIO17_2_LCD_BIAS,
-	GPIO14_PWM3_OUT,	/* backlight */
-
-	/* FFUART */
-	GPIO41_UART1_RXD | MFP_LPM_EDGE_FALL,
-	GPIO42_UART1_TXD,
-	GPIO43_UART1_CTS,
-	GPIO44_UART1_DCD,
-	GPIO45_UART1_DSR | MFP_LPM_EDGE_FALL,
-	GPIO46_UART1_RI,
-	GPIO47_UART1_DTR,
-	GPIO48_UART1_RTS,
-
-	/* AC97 */
-	GPIO34_AC97_SYSCLK,
-	GPIO35_AC97_SDATA_IN_0,
-	GPIO37_AC97_SDATA_OUT,
-	GPIO38_AC97_SYNC,
-	GPIO39_AC97_BITCLK,
-	GPIO40_AC97_nACRESET,
-	GPIO36_GPIO,	/* SDATA_IN_1 but unused - configure to GPIO */
-
-	/* SSP3 */
-	GPIO89_SSP3_SCLK,
-	GPIO90_SSP3_FRM,
-	GPIO91_SSP3_TXD,
-	GPIO92_SSP3_RXD,
-
-	/* WM9713 IRQ */
-	GPIO15_GPIO,
-
-	/* I2C */
-	GPIO32_I2C_SCL,
-	GPIO33_I2C_SDA,
-
-	/* Keypad */
-	GPIO105_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO106_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO113_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO114_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO115_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
-	GPIO116_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
-	GPIO117_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
-	GPIO118_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
-	GPIO119_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
-	GPIO120_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
-	GPIO121_KP_MKOUT_0,
-	GPIO122_KP_MKOUT_1,
-	GPIO123_KP_MKOUT_2,
-	GPIO124_KP_MKOUT_3,
-	GPIO125_KP_MKOUT_4,
-	GPIO126_KP_MKOUT_5,
-	GPIO127_KP_MKOUT_6,
-	GPIO5_2_KP_MKOUT_7,
-
-	/* Ethernet */
-	GPIO4_nCS3,
-	GPIO90_GPIO,
-
-	/* MMC1 */
-	GPIO18_MMC1_DAT0,
-	GPIO19_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO20_MMC1_DAT2,
-	GPIO21_MMC1_DAT3,
-	GPIO22_MMC1_CLK,
-	GPIO23_MMC1_CMD,/* CMD0 for slot 0 */
-	GPIO31_GPIO,	/* CMD1 default as GPIO for slot 0 */
-
-	/* MMC2 */
-	GPIO24_MMC2_DAT0,
-	GPIO25_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO26_MMC2_DAT2,
-	GPIO27_MMC2_DAT3,
-	GPIO28_MMC2_CLK,
-	GPIO29_MMC2_CMD,
-
-	/* USB Host */
-	GPIO2_2_USBH_PEN,
-	GPIO3_2_USBH_PWR,
-
-	/* Debug LEDs */
-	GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH,
-	GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH,
-};
-
-#define NUM_LCD_DETECT_PINS	7
-
-static int lcd_detect_pins[] __initdata = {
-	MFP_PIN_GPIO72,   /* LCD_LDD_17 - ORIENT */
-	MFP_PIN_GPIO71,   /* LCD_LDD_16 - LCDID[5] */
-	MFP_PIN_GPIO17_2, /* LCD_BIAS   - LCDID[4] */
-	MFP_PIN_GPIO15_2, /* LCD_LCLK   - LCDID[3] */
-	MFP_PIN_GPIO14_2, /* LCD_FCLK   - LCDID[2] */
-	MFP_PIN_GPIO73,   /* LCD_CS_N   - LCDID[1] */
-	MFP_PIN_GPIO74,   /* LCD_VSYNC  - LCDID[0] */
-	/*
-	 * set the MFP_PIN_GPIO 14/15/17 to alternate function other than
-	 * GPIO to avoid input level confliction with 14_2, 15_2, 17_2
-	 */
-	MFP_PIN_GPIO14,
-	MFP_PIN_GPIO15,
-	MFP_PIN_GPIO17,
-};
-
-static int lcd_detect_mfpr[] __initdata = {
-	/* AF0, DS 1X, Pull Neither, Edge Clear */
-	0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440,
-	0xc442, /* Backlight, Pull-Up, AF2 */
-	0x8445, /* AF5 */
-	0x8445, /* AF5 */
-};
-
-static void __init zylonite_detect_lcd_panel(void)
-{
-	unsigned long mfpr_save[ARRAY_SIZE(lcd_detect_pins)];
-	int i, gpio, id = 0;
-
-	/* save the original MFP settings of these pins and configure them
-	 * as GPIO Input, DS01X, Pull Neither, Edge Clear
-	 */
-	for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++) {
-		mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]);
-		pxa3xx_mfp_write(lcd_detect_pins[i], lcd_detect_mfpr[i]);
-	}
-
-	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
-		id = id << 1;
-		gpio = mfp_to_gpio(lcd_detect_pins[i]);
-		gpio_request(gpio, "LCD_ID_PINS");
-		gpio_direction_input(gpio);
-
-		if (gpio_get_value(gpio))
-			id = id | 0x1;
-		gpio_free(gpio);
-	}
-
-	/* lcd id, flush out bit 1 */
-	lcd_id = id & 0x3d;
-
-	/* lcd orientation, portrait or landscape */
-	lcd_orientation = (id >> 6) & 0x1;
-
-	/* restore the original MFP settings */
-	for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++)
-		pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
-}
-
-void __init zylonite_pxa320_init(void)
-{
-	if (cpu_is_pxa320()) {
-		/* initialize MFP */
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
-
-		/* detect LCD panel */
-		zylonite_detect_lcd_panel();
-
-		/* GPIO pin assignment */
-		gpio_eth_irq	= mfp_to_gpio(MFP_PIN_GPIO9);
-		gpio_debug_led1	= mfp_to_gpio(MFP_PIN_GPIO1_2);
-		gpio_debug_led2	= mfp_to_gpio(MFP_PIN_GPIO4_2);
-
-		/* WM9713 IRQ */
-		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15);
-	}
-}
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
index 12a812e61c16..f4765be1b2a0 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -4,46 +4,21 @@ menuconfig ARCH_QCOM
 	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select ARM_AMBA
+	select CLKSRC_QCOM
+	select HAVE_ARM_ARCH_TIMER
 	select PINCTRL
 	select QCOM_SCM if SMP
 	help
 	  Support for Qualcomm's devicetree based systems.
+	  This includes support for a few devices with ARM64 SoC, that have
+	  ARM32 signed firmware that does not allow booting ARM64 kernels.
 
 if ARCH_QCOM
 
-config ARCH_IPQ40XX
-	bool "Enable support for IPQ40XX"
-	select CLKSRC_QCOM
-	select HAVE_ARM_ARCH_TIMER
-
-config ARCH_MSM8X60
-	bool "Enable support for MSM8X60"
-	select CLKSRC_QCOM
-
-config ARCH_MSM8909
-	bool "Enable support for MSM8909"
-	select HAVE_ARM_ARCH_TIMER
-
-config ARCH_MSM8916
-	bool "Enable support for MSM8916"
-	select HAVE_ARM_ARCH_TIMER
+config ARCH_QCOM_RESERVE_SMEM
+	bool "Reserve SMEM at the beginning of RAM"
 	help
-	  Enable support for the Qualcomm Snapdragon 410 (MSM8916/APQ8016).
-
-	  Note that ARM64 is the main supported architecture for MSM8916.
-	  The ARM32 option is intended for a few devices with signed firmware
-	  that does not allow booting ARM64 kernels.
-
-config ARCH_MSM8960
-	bool "Enable support for MSM8960"
-	select CLKSRC_QCOM
-
-config ARCH_MSM8974
-	bool "Enable support for MSM8974"
-	select HAVE_ARM_ARCH_TIMER
-
-config ARCH_MDM9615
-	bool "Enable support for MDM9615"
-	select CLKSRC_QCOM
+	  Reserve 2MB at the beginning of the System RAM for shared mem.
+	  This is required on IPQ40xx, MSM8x60 and MSM8960 platforms.
 
 endif
diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
index 5d2f386a46d8..eca2fe0f4314 100644
--- a/arch/arm/mach-qcom/platsmp.c
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -14,7 +14,7 @@
 #include <linux/of_address.h>
 #include <linux/smp.h>
 #include <linux/io.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
 
 #include <asm/smp_plat.h>
 
diff --git a/arch/arm/mach-rda/Kconfig b/arch/arm/mach-rda/Kconfig
deleted file mode 100644
index 4d2e4e046cb3..000000000000
--- a/arch/arm/mach-rda/Kconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ARCH_RDA
-	bool "RDA Micro SoCs"
-	depends on ARCH_MULTI_V7
-	select RDA_INTC
-	select RDA_TIMER
-	help
-	  This enables support for the RDA Micro 8810PL SoC family.
diff --git a/arch/arm/mach-rda/Makefile b/arch/arm/mach-rda/Makefile
deleted file mode 100644
index f126d00ecd53..000000000000
--- a/arch/arm/mach-rda/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj- += dummy.o
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index b7855cc665e9..c90193dd3928 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -13,7 +13,7 @@ config ARCH_ROCKCHIP
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select DW_APB_TIMER_OF
-	select REGULATOR if PM
+	select REGULATOR
 	select ROCKCHIP_TIMER
 	select ARM_GLOBAL_TIMER
 	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
index 36915a073c23..f432d22bfed8 100644
--- a/arch/arm/mach-rockchip/platsmp.c
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -279,11 +279,6 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
 	}
 
 	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
-		if (rockchip_smp_prepare_sram(node)) {
-			of_node_put(node);
-			return;
-		}
-
 		/* enable the SCU power domain */
 		pmu_set_power_domain(PMU_PWRDN_SCU, true);
 
@@ -316,11 +311,19 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
 		asm ("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr));
 		ncores = ((l2ctlr >> 24) & 0x3) + 1;
 	}
-	of_node_put(node);
 
 	/* Make sure that all cores except the first are really off */
 	for (i = 1; i < ncores; i++)
 		pmu_set_power_domain(0 + i, false);
+
+	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
+		if (rockchip_smp_prepare_sram(node)) {
+			of_node_put(node);
+			return;
+		}
+	}
+
+	of_node_put(node);
 }
 
 static void __init rk3036_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index beea4564eed4..82102fbabf92 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -9,15 +9,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/of.h>
 #include <linux/of_clk.h>
-#include <linux/of_platform.h>
-#include <linux/irqchip.h>
 #include <linux/clocksource.h>
-#include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/hardware/cache-l2x0.h>
 #include "core.h"
 #include "pm.h"
 
diff --git a/arch/arm/mach-rockchip/sleep.S b/arch/arm/mach-rockchip/sleep.S
index 3eca3922c944..38b6c5186c3c 100644
--- a/arch/arm/mach-rockchip/sleep.S
+++ b/arch/arm/mach-rockchip/sleep.S
@@ -6,7 +6,7 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 
 .data
 /*
diff --git a/arch/arm/mach-rpc/Kconfig b/arch/arm/mach-rpc/Kconfig
new file mode 100644
index 000000000000..55f6d829b677
--- /dev/null
+++ b/arch/arm/mach-rpc/Kconfig
@@ -0,0 +1,21 @@
+config ARCH_RPC
+	bool "RiscPC"
+	depends on ARCH_MULTI_V4 && !(ARCH_MULTI_V4T || ARCH_MULTI_V5)
+	depends on !(ARCH_FOOTBRIDGE || ARCH_SA1100 || ARCH_MOXART || ARCH_GEMINI)
+	depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000
+	depends on CPU_LITTLE_ENDIAN
+	depends on ATAGS
+	depends on MMU
+	select ARCH_ACORN
+	select ARCH_MAY_HAVE_PC_FDC
+	select CPU_SA110
+	select FIQ
+	select HAVE_PATA_PLATFORM
+	select ISA_DMA_API
+	select LEGACY_TIMER_TICK
+	select NEED_MACH_IO_H
+	select NEED_MACH_MEMORY_H
+	select NO_IOPORT_MAP
+	help
+	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
+	  CD-ROM interface, serial and parallel port, and the floppy drive.
diff --git a/arch/arm/mach-rpc/Makefile.boot b/arch/arm/mach-rpc/Makefile.boot
deleted file mode 100644
index 0ed8e8fbde99..000000000000
--- a/arch/arm/mach-rpc/Makefile.boot
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0x10008000
-params_phys-y	:= 0x10000100
-initrd_phys-y	:= 0x18000000
-
diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c
index 53813f9464a2..2cde4c83b7f9 100644
--- a/arch/arm/mach-rpc/ecard.c
+++ b/arch/arm/mach-rpc/ecard.c
@@ -253,7 +253,7 @@ static int ecard_init_mm(void)
 	current->mm = mm;
 	current->active_mm = mm;
 	activate_mm(active_mm, mm);
-	mmdrop(active_mm);
+	mmdrop_lazy_tlb(active_mm);
 	ecard_init_pgtables(mm);
 	return 0;
 }
@@ -1109,7 +1109,7 @@ void ecard_remove_driver(struct ecard_driver *drv)
 	driver_unregister(&drv->drv);
 }
 
-static int ecard_match(struct device *_dev, struct device_driver *_drv)
+static int ecard_match(struct device *_dev, const struct device_driver *_drv)
 {
 	struct expansion_card *ec = ECARD_DEV(_dev);
 	struct ecard_driver *drv = ECARD_DRV(_drv);
@@ -1124,7 +1124,7 @@ static int ecard_match(struct device *_dev, struct device_driver *_drv)
 	return ret;
 }
 
-struct bus_type ecard_bus_type = {
+const struct bus_type ecard_bus_type = {
 	.name		= "ecard",
 	.dev_groups	= ecard_dev_groups,
 	.match		= ecard_match,
diff --git a/arch/arm/mach-s3c/Kconfig b/arch/arm/mach-s3c/Kconfig
index a64143574546..b3656109f1f7 100644
--- a/arch/arm/mach-s3c/Kconfig
+++ b/arch/arm/mach-s3c/Kconfig
@@ -2,13 +2,10 @@
 #
 # Copyright 2009 Simtec Electronics
 
-source "arch/arm/mach-s3c/Kconfig.s3c24xx"
 source "arch/arm/mach-s3c/Kconfig.s3c64xx"
 
 config PLAT_SAMSUNG
-	bool
-	depends on PLAT_S3C24XX || ARCH_S3C64XX
-	default y
+	def_bool ARCH_S3C64XX
 	select GENERIC_IRQ_CHIP
 	select NO_IOPORT_MAP
 	select SOC_SAMSUNG
@@ -16,9 +13,8 @@ config PLAT_SAMSUNG
 	  Base platform code for all Samsung SoC based systems
 
 config SAMSUNG_PM
-	bool
-	depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX)
-	default y
+	def_bool ARCH_S3C64XX
+	depends on PM
 	help
 	  Base platform power management code for samsung code
 
@@ -67,16 +63,6 @@ config S3C_GPIO_TRACK
 	  Internal configuration option to enable the s3c specific gpio
 	  chip tracking if the platform requires it.
 
-# ADC driver
-
-config S3C_ADC
-	bool "ADC common driver support"
-	depends on !ARCH_MULTIPLATFORM
-	help
-	  Core support for the ADC block found in the Samsung SoC systems
-	  for drivers such as the touchscreen and hwmon to use to share
-	  this resource.
-
 # device definitions to compile in
 
 config S3C_DEV_HSMMC
@@ -99,46 +85,11 @@ config S3C_DEV_HSMMC3
 	help
 	  Compile in platform device definitions for HSMMC channel 3
 
-config S3C_DEV_HWMON
-	bool
-	help
-	  Compile in platform device definitions for HWMON
-
 config S3C_DEV_I2C1
 	bool
 	help
 	  Compile in platform device definitions for I2C channel 1
 
-config S3C_DEV_I2C2
-	bool
-	help
-	  Compile in platform device definitions for I2C channel 2
-
-config S3C_DEV_I2C3
-	bool
-	help
-	  Compile in platform device definition for I2C controller 3
-
-config S3C_DEV_I2C4
-	bool
-	help
-	  Compile in platform device definition for I2C controller 4
-
-config S3C_DEV_I2C5
-	bool
-	help
-	  Compile in platform device definition for I2C controller 5
-
-config S3C_DEV_I2C6
-	bool
-	help
-	  Compile in platform device definition for I2C controller 6
-
-config S3C_DEV_I2C7
-	bool
-	help
-	  Compile in platform device definition for I2C controller 7
-
 config S3C_DEV_FB
 	bool
 	help
@@ -154,48 +105,12 @@ config S3C_DEV_USB_HSOTG
 	help
 	  Compile in platform device definition for USB high-speed OtG
 
-config S3C_DEV_WDT
-	bool
-	default y if ARCH_S3C24XX
-	help
-	  Compile in platform device definition for Watchdog Timer
-
-config S3C_DEV_NAND
-	bool
-	help
-	  Compile in platform device definition for NAND controller
-
-config S3C_DEV_ONENAND
-	bool
-	help
-	  Compile in platform device definition for OneNAND controller
-
-config S3C_DEV_RTC
-	bool
-	help
-	  Compile in platform device definition for RTC
-
-config SAMSUNG_DEV_ADC
-	bool
-	help
-	  Compile in platform device definition for ADC controller
-
-config SAMSUNG_DEV_IDE
-	bool
-	help
-	  Compile in platform device definitions for IDE
-
 config S3C64XX_DEV_SPI0
 	bool
 	help
 	  Compile in platform device definitions for S3C64XX's type
 	  SPI controller 0
 
-config SAMSUNG_DEV_TS
-	bool
-	help
-	  Common in platform device definitions for touchscreen device
-
 config SAMSUNG_DEV_KEYPAD
 	bool
 	help
@@ -203,7 +118,6 @@ config SAMSUNG_DEV_KEYPAD
 
 config SAMSUNG_DEV_PWM
 	bool
-	default y if ARCH_S3C24XX
 	help
 	  Compile in platform device definition for PWM Timer
 
diff --git a/arch/arm/mach-s3c/Kconfig.s3c24xx b/arch/arm/mach-s3c/Kconfig.s3c24xx
deleted file mode 100644
index 7287e173f30e..000000000000
--- a/arch/arm/mach-s3c/Kconfig.s3c24xx
+++ /dev/null
@@ -1,604 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Copyright (c) 2012 Samsung Electronics Co., Ltd.
-#		http://www.samsung.com/
-#
-# Copyright 2007 Simtec Electronics
-menuconfig ARCH_S3C24XX
-	bool "Samsung S3C24XX SoCs (deprecated, see help)"
-	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
-	depends on CPU_LITTLE_ENDIAN
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CLKSRC_SAMSUNG_PWM
-	select GPIO_SAMSUNG
-	select GPIOLIB
-	select S3C2410_WATCHDOG
-	select SAMSUNG_ATAGS
-	select WATCHDOG
-	help
-	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
-	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
-	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
-	  Samsung SMDK2410 development board (and derivatives).
-
-	  The platform is deprecated and scheduled for removal. Please reach to
-	  the maintainers of the platform and linux-samsung-soc@vger.kernel.org if
-	  you still use it.
-	  Without such feedback, the platform will be removed after 2022.
-
-if ARCH_S3C24XX
-
-config PLAT_S3C24XX
-	def_bool y
-	select GPIOLIB
-	select NO_IOPORT_MAP
-	select S3C_DEV_NAND
-	select COMMON_CLK
-	help
-	  Base platform code for any Samsung S3C24XX device
-
-menu "Samsung S3C24XX SoCs Support"
-
-comment "S3C24XX SoCs"
-
-config CPU_S3C2410
-	bool "Samsung S3C2410"
-	depends on ARCH_MULTI_V4T
-	default y
-	select CPU_ARM920T
-	select S3C2410_COMMON_CLK
-	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
-	select S3C2410_PM if PM
-	help
-	  Support for S3C2410 and S3C2410A family from the S3C24XX line
-	  of Samsung Mobile CPUs.
-
-config CPU_S3C2412
-	bool "Samsung S3C2412"
-	depends on ARCH_MULTI_V5
-	select CPU_ARM926T
-	select S3C2412_COMMON_CLK
-	select S3C2412_PM if PM_SLEEP
-	help
-	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
-
-config CPU_S3C2416
-	bool "Samsung S3C2416/S3C2450"
-	depends on ARCH_MULTI_V5
-	select CPU_ARM926T
-	select S3C2416_PM if PM_SLEEP
-	select S3C2443_COMMON_CLK
-	help
-	  Support for the S3C2416 SoC from the S3C24XX line
-
-config CPU_S3C2440
-	bool "Samsung S3C2440"
-	depends on ARCH_MULTI_V4T
-	select CPU_ARM920T
-	select S3C2410_COMMON_CLK
-	select S3C2410_PM if PM_SLEEP
-	help
-	  Support for S3C2440 Samsung Mobile CPU based systems.
-
-config CPU_S3C2442
-	bool "Samsung S3C2442"
-	depends on ARCH_MULTI_V4T
-	select CPU_ARM920T
-	select S3C2410_COMMON_CLK
-	select S3C2410_PM if PM_SLEEP
-	help
-	  Support for S3C2442 Samsung Mobile CPU based systems.
-
-config CPU_S3C244X
-	def_bool y
-	depends on CPU_S3C2440 || CPU_S3C2442
-
-config CPU_S3C2443
-	bool "Samsung S3C2443"
-	depends on ARCH_MULTI_V4T
-	select CPU_ARM920T
-	select S3C2443_COMMON_CLK
-	help
-	  Support for the S3C2443 SoC from the S3C24XX line
-
-# common code
-
-config S3C24XX_SMDK
-	bool
-	help
-	  Common machine code for SMDK2410 and SMDK2440
-
-config S3C24XX_SIMTEC_AUDIO
-	bool
-	depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS)
-	default y
-	help
-	  Add audio devices for common Simtec S3C24XX boards
-
-config S3C24XX_SIMTEC_PM
-	bool
-	help
-	  Common power management code for systems that are
-	  compatible with the Simtec style of power management
-
-config S3C24XX_SIMTEC_USB
-	bool
-	help
-	  USB management code for common Simtec S3C24XX boards
-
-config S3C24XX_SETUP_TS
-	bool
-	help
-	  Compile in platform device definition for Samsung TouchScreen.
-
-config S3C2410_PM
-	bool
-	help
-	  Power Management code common to S3C2410 and better
-
-config S3C24XX_PLL
-	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
-	depends on ARM_S3C24XX_CPUFREQ
-	help
-	  Compile in support for changing the PLL frequency from the
-	  S3C24XX series CPUfreq driver. The PLL takes time to settle
-	  after a frequency change, so by default it is not enabled.
-
-	  This also means that the PLL tables for the selected CPU(s) will
-	  be built which may increase the size of the kernel image.
-
-# cpu frequency items common between s3c2410 and s3c2440/s3c2442
-
-config S3C2410_IOTIMING
-	bool
-	depends on ARM_S3C24XX_CPUFREQ
-	help
-	  Internal node to select io timing code that is common to the s3c2410
-	  and s3c2440/s3c2442 cpu frequency support.
-
-# cpu frequency support common to s3c2412, s3c2413 and s3c2442
-
-config S3C2412_IOTIMING
-	bool
-	depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443)
-	help
-	  Intel node to select io timing code that is common to the s3c2412
-	  and the s3c2443.
-
-# cpu-specific sections
-
-if CPU_S3C2410
-
-config S3C2410_PLL
-	bool
-	depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL
-	default y
-	help
-	  Select the PLL table for the S3C2410
-
-config S3C24XX_SIMTEC_NOR
-	bool
-	help
-	  Internal node to specify machine has simtec NOR mapping
-
-config MACH_BAST_IDE
-	bool
-	select HAVE_PATA_PLATFORM
-	help
-	  Internal node for machines with an BAST style IDE
-	  interface
-
-comment "S3C2410 Boards"
-
-#
-# The "S3C2410 Boards" list is ordered alphabetically by option text.
-# (without ARCH_ or MACH_)
-#
-
-config MACH_AML_M5900
-	bool "AML M5900 Series"
-	select S3C24XX_SIMTEC_PM if PM
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the American Microsystems M5900 Series
-	  <http://www.amltd.com>
-
-config ARCH_BAST
-	bool "Simtec Electronics BAST (EB2410ITX)"
-	select MACH_BAST_IDE
-	select S3C2410_COMMON_DCLK
-	select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
-	select S3C24XX_SIMTEC_NOR
-	select S3C24XX_SIMTEC_PM if PM
-	select S3C24XX_SIMTEC_USB
-	select S3C_DEV_HWMON
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Simtec Electronics EB2410ITX
-	  development board (also known as BAST)
-
-config BAST_PC104_IRQ
-	bool "BAST PC104 IRQ support"
-	depends on ARCH_BAST
-	default y
-	help
-	  Say Y	here to enable the PC104 IRQ routing on the
-	  Simtec BAST (EB2410ITX)
-
-config ARCH_H1940
-	bool "IPAQ H1940"
-	select PM_H1940 if PM
-	select S3C24XX_SETUP_TS
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the HP IPAQ H1940
-
-config H1940BT
-	tristate "Control the state of H1940 bluetooth chip"
-	depends on ARCH_H1940
-	depends on RFKILL
-	help
-	  This is a simple driver that is able to control
-	  the state of built in bluetooth chip on h1940.
-
-config MACH_N30
-	bool "Acer N30 family"
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you want suppt for the Acer N30, Acer N35,
-	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
-
-config MACH_OTOM
-	bool "NexVision OTOM Board"
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Nex Vision OTOM board
-
-config MACH_QT2410
-	bool "QT2410"
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Armzone QT2410
-
-config ARCH_SMDK2410
-	bool "SMDK2410/A9M2410"
-	select S3C24XX_SMDK
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the SMDK2410 or the derived module A9M2410
-	  <http://www.fsforth.de>
-
-config MACH_TCT_HAMMER
-	bool "TCT Hammer Board"
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the TinCanTools Hammer Board
-	  <https://www.tincantools.com>
-
-config MACH_VR1000
-	bool "Thorcom VR1000"
-	select MACH_BAST_IDE
-	select S3C2410_COMMON_DCLK
-	select S3C24XX_SIMTEC_NOR
-	select S3C24XX_SIMTEC_PM if PM
-	select S3C24XX_SIMTEC_USB
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Thorcom VR1000 board.
-
-endif # CPU_S3C2410
-
-config S3C2412_PM_SLEEP
-	bool
-	help
-	  Internal config node to apply sleep for S3C2412 power management.
-	  Can be selected by another SoCs such as S3C2416 with similar
-	  sleep procedure.
-
-if CPU_S3C2412
-
-config CPU_S3C2412_ONLY
-	bool
-	depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \
-		   !CPU_S3C2442 && !CPU_S3C2443
-	default y
-
-config S3C2412_PM
-	bool
-	select S3C2412_PM_SLEEP
-	select SAMSUNG_WAKEMASK
-	help
-	  Internal config node to apply S3C2412 power management
-
-comment "S3C2412 Boards"
-
-#
-# The "S3C2412 Boards" list is ordered alphabetically by option text.
-# (without ARCH_ or MACH_)
-#
-
-config MACH_JIVE
-	bool "Logitech Jive"
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Logitech Jive.
-
-config MACH_JIVE_SHOW_BOOTLOADER
-	bool "Allow access to bootloader partitions in MTD"
-	depends on MACH_JIVE
-
-config MACH_S3C2413
-	bool
-	help
-	  Internal node for S3C2413 version of SMDK2413, so that
-	  machine_is_s3c2413() will work when MACH_SMDK2413 is
-	  selected
-
-config MACH_SMDK2412
-	bool "SMDK2412"
-	select MACH_SMDK2413
-	help
-	  Say Y here if you are using an SMDK2412
-
-	  Note, this shares support with SMDK2413, so will automatically
-	  select MACH_SMDK2413.
-
-config MACH_SMDK2413
-	bool "SMDK2413"
-	select MACH_S3C2413
-	select S3C24XX_SMDK
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using an SMDK2413
-
-config MACH_VSTMS
-	bool "VMSTMS"
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using an VSTMS board
-
-endif # CPU_S3C2412
-
-if CPU_S3C2416
-
-config S3C2416_PM
-	bool
-	select S3C2412_PM_SLEEP
-	select SAMSUNG_WAKEMASK
-	help
-	  Internal config node to apply S3C2416 power management
-
-config S3C2416_SETUP_SDHCI
-	bool
-	select S3C2416_SETUP_SDHCI_GPIO
-	help
-	  Internal helper functions for S3C2416 based SDHCI systems
-
-config S3C2416_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for SDHCI gpio.
-
-comment "S3C2416 Boards"
-
-config MACH_SMDK2416
-	bool "SMDK2416"
-	select S3C2416_SETUP_SDHCI
-	select S3C24XX_SMDK
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using an SMDK2416
-
-config MACH_S3C2416_DT
-	bool "Samsung S3C2416 machine using devicetree"
-	select TIMER_OF
-	select USE_OF
-	select PINCTRL
-	select PINCTRL_S3C24XX
-	help
-	  Machine support for Samsung S3C2416 machines with device tree enabled.
-	  Select this if a fdt blob is available for the S3C2416 SoC based board.
-	  Note: This is under development and not all peripherals can be supported
-	  with this machine file.
-
-endif # CPU_S3C2416
-
-if CPU_S3C2440 || CPU_S3C2442
-
-config S3C2440_XTAL_12000000
-	bool
-	help
-	  Indicate that the build needs to support 12MHz system
-	  crystal.
-
-config S3C2440_XTAL_16934400
-	bool
-	help
-	  Indicate that the build needs to support 16.9344MHz system
-	  crystal.
-
-config S3C2440_PLL_12000000
-	bool
-	depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000
-	default y if S3C24XX_PLL
-	help
-	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
-
-config S3C2440_PLL_16934400
-	bool
-	depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400
-	default y if S3C24XX_PLL
-	help
-	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-endif # CPU_S3C2440 || CPU_S3C2442
-
-if CPU_S3C2440
-
-comment "S3C2440 Boards"
-
-#
-# The "S3C2440 Boards" list is ordered alphabetically by option text.
-# (without ARCH_ or MACH_)
-#
-
-config MACH_ANUBIS
-	bool "Simtec Electronics ANUBIS"
-	select HAVE_PATA_PLATFORM
-	select S3C2410_COMMON_DCLK
-	select S3C2440_XTAL_12000000
-	select S3C24XX_SIMTEC_PM if PM
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Simtec Electronics ANUBIS
-	  development system
-
-config MACH_AT2440EVB
-	bool "Avantech AT2440EVB development board"
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the AT2440EVB development board
-
-config MACH_MINI2440
-	bool "MINI2440 development board"
-	select LEDS_CLASS
-	select LEDS_TRIGGERS
-	select LEDS_TRIGGER_BACKLIGHT
-	select NEW_LEDS
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
-	  available via various sources. It can come with a 3.5" or 7" touch LCD.
-
-config MACH_NEXCODER_2440
-	bool "NexVision NEXCODER 2440 Light Board"
-	select S3C2440_XTAL_12000000
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
-
-config MACH_OSIRIS
-	bool "Simtec IM2440D20 (OSIRIS) module"
-	select S3C2410_COMMON_DCLK
-	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
-	select S3C2440_XTAL_12000000
-	select S3C24XX_SIMTEC_PM if PM
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Simtec IM2440D20 module, also
-	  known as the Osiris.
-
-config MACH_OSIRIS_DVS
-	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
-	depends on MACH_OSIRIS
-	depends on TPS65010
-	help
-	  Say Y/M here if you want to have dynamic voltage scaling support
-	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
-
-	  The DVS driver alters the voltage supplied to the ARM core
-	  depending on the frequency it is running at. The driver itself
-	  does not do any of the frequency alteration, which is left up
-	  to the cpufreq driver.
-
-config MACH_RX3715
-	bool "HP iPAQ rx3715"
-	select PM_H1940 if PM
-	select S3C2440_XTAL_16934400
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the HP iPAQ rx3715.
-
-config ARCH_S3C2440
-	bool "SMDK2440"
-	select S3C2440_XTAL_16934400
-	select S3C24XX_SMDK
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the SMDK2440.
-
-config SMDK2440_CPU2440
-	bool "SMDK2440 with S3C2440 CPU module"
-	default y if ARCH_S3C2440
-	select S3C2440_XTAL_16934400
-
-endif # CPU_S3C2440
-
-if CPU_S3C2442
-
-comment "S3C2442 Boards"
-
-#
-# The "S3C2442 Boards" list is ordered alphabetically by option text.
-# (without ARCH_ or MACH_)
-#
-
-config MACH_NEO1973_GTA02
-	bool "Openmoko GTA02 / Freerunner phone"
-	select I2C
-	select MFD_PCF50633
-	select PCF50633_GPIO
-	select POWER_SUPPLY
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-config MACH_RX1950
-	bool "HP iPAQ rx1950"
-	select I2C
-	select PM_H1940 if PM
-	select S3C2410_COMMON_DCLK
-	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
-	select S3C2440_XTAL_16934400
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you're using HP iPAQ rx1950
-
-endif # CPU_S3C2442
-
-if CPU_S3C2443 || CPU_S3C2416
-
-config S3C2443_SETUP_SPI
-	bool
-	help
-	  Common setup code for SPI GPIO configurations
-
-endif # CPU_S3C2443 || CPU_S3C2416
-
-if CPU_S3C2443
-
-comment "S3C2443 Boards"
-
-config MACH_SMDK2443
-	bool "SMDK2443"
-	select S3C24XX_SMDK
-	select S3C_DEV_HSMMC1
-	help
-	  Say Y here if you are using an SMDK2443
-
-endif # CPU_S3C2443
-
-config PM_H1940
-	bool
-	help
-	  Internal node for H1940 and related PM
-
-endmenu # "Samsung S3C24XX SoCs Support"
-
-endif # ARCH_S3C24XX
diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
index 0c1b91c3ac5f..8f40af063ad6 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -15,7 +15,6 @@ menuconfig ARCH_S3C64XX
 	select HAVE_TCM
 	select PLAT_SAMSUNG
 	select PM_GENERIC_DOMAINS if PM
-	select S3C_DEV_NAND if ATAGS
 	select S3C_GPIO_TRACK if ATAGS
 	select S3C2410_WATCHDOG
 	select SAMSUNG_ATAGS if ATAGS
@@ -54,17 +53,6 @@ config S3C64XX_SETUP_SDHCI
 	  Internal configuration for default SDHCI setup for S3C6400 and
 	  S3C6410 SoCs.
 
-config S3C64XX_DEV_ONENAND1
-	bool
-	help
-	  Compile in platform device definition for OneNAND1 controller
-
-config SAMSUNG_DEV_BACKLIGHT
-	bool
-	depends on SAMSUNG_DEV_PWM
-	help
-	  Compile in platform device definition LCD backlight with PWM Timer
-
 # platform specific device setup
 
 config S3C64XX_SETUP_I2C0
@@ -81,11 +69,6 @@ config S3C64XX_SETUP_I2C1
 	help
 	  Common setup code for i2c bus 1.
 
-config S3C64XX_SETUP_IDE
-	bool
-	help
-	  Common setup code for S3C64XX IDE.
-
 config S3C64XX_SETUP_FB_24BPP
 	bool
 	help
@@ -113,201 +96,6 @@ config S3C64XX_SETUP_USB_PHY
 
 # S36400 Macchine support
 
-config MACH_SMDK6400
-	bool "SMDK6400"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6400
-	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_HSMMC1
-	help
-	  Machine support for the Samsung SMDK6400
-
-# S3C6410 machine support
-
-config MACH_ANW6410
-	bool "A&W6410"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C_DEV_FB
-	help
-	  Machine support for the A&W6410
-
-config MACH_MINI6410
-	bool "MINI6410"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_TS
-	help
-	  Machine support for the FriendlyARM MINI6410
-
-config MACH_REAL6410
-	bool "REAL6410"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_TS
-	help
-	  Machine support for the CoreWind REAL6410
-
-config MACH_SMDK6410
-	bool "SMDK6410"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_I2C1
-	select S3C64XX_SETUP_IDE
-	select S3C64XX_SETUP_KEYPAD
-	select S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_USB_PHY
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_USB_HSOTG
-	select S3C_DEV_WDT
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_BACKLIGHT
-	select SAMSUNG_DEV_IDE
-	select SAMSUNG_DEV_KEYPAD
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_TS
-	help
-	  Machine support for the Samsung SMDK6410
-
-# At least some of the SMDK6410s were shipped with the card detect
-# for the MMC/SD slots connected to the same input. This means that
-# either the boards need to be altered to have channel0 to an alternate
-# configuration or that only one slot can be used.
-
-choice
-	prompt "SMDK6410 MMC/SD slot setup"
-	depends on MACH_SMDK6410
-
-config SMDK6410_SD_CH0
-	bool "Use channel 0 only"
-	depends on MACH_SMDK6410
-	help
-	  Select CON7 (channel 0) as the MMC/SD slot, as
-	  at least some SMDK6410 boards come with the
-	  resistors fitted so that the card detects for
-	  channels 0 and 1 are the same.
-
-config SMDK6410_SD_CH1
-	bool "Use channel 1 only"
-	depends on MACH_SMDK6410
-	help
-	  Select CON6 (channel 1) as the MMC/SD slot, as
-	  at least some SMDK6410 boards come with the
-	  resistors fitted so that the card detects for
-	  channels 0 and 1 are the same.
-
-endchoice
-
-config SMDK6410_WM1190_EV1
-	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
-	depends on MACH_SMDK6410
-	depends on I2C=y
-	select MFD_WM8350_I2C
-	select REGULATOR
-	select REGULATOR_WM8350
-	help
-	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
-	  and audio daughtercard for the Samsung SMDK6410 reference
-	  platform.  Enabling this option will build support for this
-	  module into the kernel.  The presence of the module will be
-	  detected at runtime so the resulting kernel can be used
-	  with or without the 1190-EV1 fitted.
-
-config SMDK6410_WM1192_EV1
-	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
-	depends on MACH_SMDK6410
-	depends on I2C=y
-	select MFD_WM831X
-	select MFD_WM831X_I2C
-	select REGULATOR
-	select REGULATOR_WM831X
-	help
-	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
-	  daughtercard for the Samsung SMDK6410 reference platform.
-	  Enabling this option will build support for this module into
-	  the kernel.  The presence of the daughtercard will be
-	  detected at runtime so the resulting kernel can be used
-	  with or without the 1192-EV1 fitted.
-
-config MACH_NCP
-	bool "NCP"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6410
-	select S3C64XX_SETUP_I2C1
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_I2C1
-	help
-	  Machine support for the Samsung NCP
-
-config MACH_HMT
-	bool "Airgoo HMT"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C_DEV_FB
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	select SAMSUNG_DEV_PWM
-	help
-	  Machine support for the Airgoo HMT
-
-config MACH_SMARTQ
-	bool
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_USB_PHY
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HWMON
-	select S3C_DEV_RTC
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_USB_HSOTG
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_TS
-	help
-	  Shared machine support for SmartQ 5/7
-
-config MACH_SMARTQ5
-	bool "SmartQ 5"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select MACH_SMARTQ
-	help
-	  Machine support for the SmartQ 5
-
-config MACH_SMARTQ7
-	bool "SmartQ 7"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select MACH_SMARTQ
-	help
-	  Machine support for the SmartQ 7
-
 config MACH_WLF_CRAGG_6410
 	bool "Wolfson Cragganmore 6410"
 	depends on ATAGS
@@ -317,7 +105,6 @@ config MACH_WLF_CRAGG_6410
 	select S3C64XX_DEV_SPI0
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_I2C1
-	select S3C64XX_SETUP_IDE
 	select S3C64XX_SETUP_KEYPAD
 	select S3C64XX_SETUP_SDHCI
 	select S3C64XX_SETUP_SPI
@@ -327,11 +114,8 @@ config MACH_WLF_CRAGG_6410
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_USB_HSOTG
-	select S3C_DEV_WDT
-	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
 	help
diff --git a/arch/arm/mach-s3c/Makefile b/arch/arm/mach-s3c/Makefile
index 7c7d3318fd61..988c49672715 100644
--- a/arch/arm/mach-s3c/Makefile
+++ b/arch/arm/mach-s3c/Makefile
@@ -2,26 +2,15 @@
 #
 # Copyright 2009 Simtec Electronics
 
-ifdef CONFIG_ARCH_S3C24XX
-include $(src)/Makefile.s3c24xx
-endif
-
-ifdef CONFIG_ARCH_S3C64XX
 include $(src)/Makefile.s3c64xx
-endif
 
 # Objects we always build independent of SoC choice
 
 obj-y				+= init.o cpu.o
 
-# ADC
-
-obj-$(CONFIG_S3C_ADC)	+= adc.o
-
 # devices
 
 obj-$(CONFIG_SAMSUNG_ATAGS)	+= platformdata.o
-
 obj-$(CONFIG_SAMSUNG_ATAGS)	+= devs.o
 obj-$(CONFIG_SAMSUNG_ATAGS)	+= dev-uart.o
 
@@ -31,5 +20,4 @@ obj-$(CONFIG_GPIO_SAMSUNG)     += gpio-samsung.o
 
 obj-$(CONFIG_SAMSUNG_PM)	+= pm.o pm-common.o
 obj-$(CONFIG_SAMSUNG_PM_GPIO)	+= pm-gpio.o
-
 obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o
diff --git a/arch/arm/mach-s3c/Makefile.boot b/arch/arm/mach-s3c/Makefile.boot
deleted file mode 100644
index 7f19e226035e..000000000000
--- a/arch/arm/mach-s3c/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-ifeq ($(CONFIG_PM_H1940),y)
-	zreladdr-y	+= 0x30108000
-	params_phys-y	:= 0x30100100
-else
-	zreladdr-y	+= 0x30008000
-	params_phys-y	:= 0x30000100
-endif
diff --git a/arch/arm/mach-s3c/Makefile.s3c24xx b/arch/arm/mach-s3c/Makefile.s3c24xx
deleted file mode 100644
index 3483ab3a2b81..000000000000
--- a/arch/arm/mach-s3c/Makefile.s3c24xx
+++ /dev/null
@@ -1,102 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Copyright (c) 2012 Samsung Electronics Co., Ltd.
-#		http://www.samsung.com/
-#
-# Copyright 2007 Simtec Electronics
-
-# core
-
-obj-y				+= s3c24xx.o
-obj-y				+= irq-s3c24xx.o
-obj-$(CONFIG_SPI_S3C24XX_FIQ)	+= irq-s3c24xx-fiq.o
-obj-$(CONFIG_SPI_S3C24XX_FIQ)	+= irq-s3c24xx-fiq-exports.o
-
-obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
-obj-$(CONFIG_S3C2410_PLL)	+= pll-s3c2410.o
-obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
-
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
-obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
-obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
-
-obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o
-obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
-
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o
-obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
-obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
-obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
-
-obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o
-
-# PM
-
-obj-$(CONFIG_PM)		+= pm-s3c24xx.o
-obj-$(CONFIG_PM_SLEEP)		+= irq-pm-s3c24xx.o sleep-s3c24xx.o
-
-# common code
-
-obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += cpufreq-utils-s3c24xx.o
-
-obj-$(CONFIG_S3C2410_IOTIMING)	+= iotiming-s3c2410.o
-obj-$(CONFIG_S3C2412_IOTIMING)	+= iotiming-s3c2412.o
-
-#
-# machine support
-# following is ordered alphabetically by option text.
-#
-
-obj-$(CONFIG_MACH_AML_M5900)		+= mach-amlm5900.o
-obj-$(CONFIG_ARCH_BAST)			+= mach-bast.o
-obj-$(CONFIG_BAST_PC104_IRQ)		+= bast-irq.o
-obj-$(CONFIG_ARCH_H1940)		+= mach-h1940.o
-obj-$(CONFIG_H1940BT)			+= h1940-bluetooth.o
-obj-$(CONFIG_PM_H1940)			+= pm-h1940.o
-obj-$(CONFIG_MACH_N30)			+= mach-n30.o
-obj-$(CONFIG_MACH_OTOM)			+= mach-otom.o
-obj-$(CONFIG_MACH_QT2410)		+= mach-qt2410.o
-obj-$(CONFIG_ARCH_SMDK2410)		+= mach-smdk2410.o
-obj-$(CONFIG_MACH_TCT_HAMMER)		+= mach-tct_hammer.o
-obj-$(CONFIG_MACH_VR1000)		+= mach-vr1000.o
-
-obj-$(CONFIG_MACH_JIVE)			+= mach-jive.o
-obj-$(CONFIG_MACH_SMDK2413)		+= mach-smdk2413.o
-obj-$(CONFIG_MACH_VSTMS)		+= mach-vstms.o
-
-obj-$(CONFIG_MACH_SMDK2416)		+= mach-smdk2416.o
-obj-$(CONFIG_MACH_S3C2416_DT)		+= mach-s3c2416-dt.o
-
-obj-$(CONFIG_MACH_ANUBIS)		+= mach-anubis.o
-obj-$(CONFIG_MACH_AT2440EVB)		+= mach-at2440evb.o
-obj-$(CONFIG_MACH_MINI2440)		+= mach-mini2440.o
-obj-$(CONFIG_MACH_NEXCODER_2440)	+= mach-nexcoder.o
-obj-$(CONFIG_MACH_OSIRIS)		+= mach-osiris.o
-obj-$(CONFIG_MACH_RX3715)		+= mach-rx3715.o
-obj-$(CONFIG_ARCH_S3C2440)		+= mach-smdk2440.o
-
-obj-$(CONFIG_MACH_NEO1973_GTA02)	+= mach-gta02.o
-obj-$(CONFIG_MACH_RX1950)		+= mach-rx1950.o
-
-obj-$(CONFIG_MACH_SMDK2443)		+= mach-smdk2443.o
-
-# common bits of machine support
-
-obj-$(CONFIG_S3C24XX_SMDK)		+= common-smdk-s3c24xx.o
-obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO)	+= simtec-audio.o
-obj-$(CONFIG_S3C24XX_SIMTEC_NOR)	+= simtec-nor.o
-obj-$(CONFIG_S3C24XX_SIMTEC_PM)		+= simtec-pm.o
-obj-$(CONFIG_S3C24XX_SIMTEC_USB)	+= simtec-usb.o
-
-# machine additions
-
-obj-$(CONFIG_MACH_BAST_IDE)		+= bast-ide.o
-obj-$(CONFIG_MACH_OSIRIS_DVS)		+= mach-osiris-dvs.o
-
-# device setup
-
-obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio-s3c24xx.o
-obj-$(CONFIG_S3C2443_SETUP_SPI)		+= setup-spi-s3c24xx.o
-obj-$(CONFIG_ARCH_S3C24XX)		+= setup-i2c-s3c24xx.o
-obj-$(CONFIG_S3C24XX_SETUP_TS)		+= setup-ts-s3c24xx.o
diff --git a/arch/arm/mach-s3c/Makefile.s3c64xx b/arch/arm/mach-s3c/Makefile.s3c64xx
index 21e919bf2cd1..61287ad2ea42 100644
--- a/arch/arm/mach-s3c/Makefile.s3c64xx
+++ b/arch/arm/mach-s3c/Makefile.s3c64xx
@@ -16,7 +16,6 @@ obj-$(CONFIG_PM_SLEEP)          += irq-pm-s3c64xx.o
 # Core
 
 obj-y				+= s3c64xx.o
-obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
 obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
 
 # DMA support
@@ -33,26 +32,12 @@ obj-y				+= dev-audio-s3c64xx.o
 obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP)	+= setup-fb-24bpp-s3c64xx.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C0)	+= setup-i2c0-s3c64xx.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C1)	+= setup-i2c1-s3c64xx.o
-obj-$(CONFIG_S3C64XX_SETUP_IDE)		+= setup-ide-s3c64xx.o
 obj-$(CONFIG_S3C64XX_SETUP_KEYPAD)	+= setup-keypad-s3c64xx.o
 obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio-s3c64xx.o
 obj-$(CONFIG_S3C64XX_SETUP_SPI)		+= setup-spi-s3c64xx.o
 obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy-s3c64xx.o
 
-obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight-s3c64xx.o
-
 # Machine support
-
-obj-$(CONFIG_MACH_ANW6410)		+= mach-anw6410.o
-obj-$(CONFIG_MACH_HMT)			+= mach-hmt.o
-obj-$(CONFIG_MACH_MINI6410)		+= mach-mini6410.o
-obj-$(CONFIG_MACH_NCP)			+= mach-ncp.o
-obj-$(CONFIG_MACH_REAL6410)		+= mach-real6410.o
-obj-$(CONFIG_MACH_SMARTQ)		+= mach-smartq.o
-obj-$(CONFIG_MACH_SMARTQ5)		+= mach-smartq5.o
-obj-$(CONFIG_MACH_SMARTQ7)		+= mach-smartq7.o
-obj-$(CONFIG_MACH_SMDK6400)		+= mach-smdk6400.o
-obj-$(CONFIG_MACH_SMDK6410)		+= mach-smdk6410.o
 obj-$(CONFIG_MACH_WLF_CRAGG_6410)	+= mach-crag6410.o mach-crag6410-module.o
 endif
 
diff --git a/arch/arm/mach-s3c/adc-core.h b/arch/arm/mach-s3c/adc-core.h
deleted file mode 100644
index 039f6862b6a7..000000000000
--- a/arch/arm/mach-s3c/adc-core.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Samsung ADC Controller core functions
- */
-
-#ifndef __ASM_PLAT_ADC_CORE_H
-#define __ASM_PLAT_ADC_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_adc_setname(char *name)
-{
-#if defined(CONFIG_SAMSUNG_DEV_ADC) || defined(CONFIG_PLAT_S3C24XX)
-	s3c_device_adc.name = name;
-#endif
-}
-
-#endif /* __ASM_PLAT_ADC_CORE_H */
diff --git a/arch/arm/mach-s3c/adc.c b/arch/arm/mach-s3c/adc.c
deleted file mode 100644
index 0232520d3c13..000000000000
--- a/arch/arm/mach-s3c/adc.c
+++ /dev/null
@@ -1,510 +0,0 @@
-// SPDX-License-Identifier: GPL-1.0+
-//
-// Copyright (c) 2008 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
-//
-// Samsung ADC device core
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/mod_devicetable.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/regulator/consumer.h>
-
-#include "regs-adc.h"
-#include <linux/soc/samsung/s3c-adc.h>
-
-/* This driver is designed to control the usage of the ADC block between
- * the touchscreen and any other drivers that may need to use it, such as
- * the hwmon driver.
- *
- * Priority will be given to the touchscreen driver, but as this itself is
- * rate limited it should not starve other requests which are processed in
- * order that they are received.
- *
- * Each user registers to get a client block which uniquely identifies it
- * and stores information such as the necessary functions to callback when
- * action is required.
- */
-
-enum s3c_cpu_type {
-	TYPE_ADCV1, /* S3C24XX */
-	TYPE_ADCV11, /* S3C2443 */
-	TYPE_ADCV12, /* S3C2416, S3C2450 */
-	TYPE_ADCV2, /* S3C64XX */
-	TYPE_ADCV3, /* S5PV210, S5PC110, Exynos4210 */
-};
-
-struct s3c_adc_client {
-	struct platform_device	*pdev;
-	struct list_head	 pend;
-	wait_queue_head_t	*wait;
-
-	unsigned int		 nr_samples;
-	int			 result;
-	unsigned char		 is_ts;
-	unsigned char		 channel;
-
-	void	(*select_cb)(struct s3c_adc_client *c, unsigned selected);
-	void	(*convert_cb)(struct s3c_adc_client *c,
-			      unsigned val1, unsigned val2,
-			      unsigned *samples_left);
-};
-
-struct adc_device {
-	struct platform_device	*pdev;
-	struct platform_device	*owner;
-	struct clk		*clk;
-	struct s3c_adc_client	*cur;
-	struct s3c_adc_client	*ts_pend;
-	void __iomem		*regs;
-	spinlock_t		 lock;
-
-	unsigned int		 prescale;
-
-	int			 irq;
-	struct regulator	*vdd;
-};
-
-static struct adc_device *adc_dev;
-
-static LIST_HEAD(adc_pending);	/* protected by adc_device.lock */
-
-#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
-
-static inline void s3c_adc_convert(struct adc_device *adc)
-{
-	unsigned con = readl(adc->regs + S3C2410_ADCCON);
-
-	con |= S3C2410_ADCCON_ENABLE_START;
-	writel(con, adc->regs + S3C2410_ADCCON);
-}
-
-static inline void s3c_adc_select(struct adc_device *adc,
-				  struct s3c_adc_client *client)
-{
-	unsigned con = readl(adc->regs + S3C2410_ADCCON);
-	enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
-
-	client->select_cb(client, 1);
-
-	if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV2)
-		con &= ~S3C2410_ADCCON_MUXMASK;
-	con &= ~S3C2410_ADCCON_STDBM;
-	con &= ~S3C2410_ADCCON_STARTMASK;
-
-	if (!client->is_ts) {
-		if (cpu == TYPE_ADCV3)
-			writel(client->channel & 0xf, adc->regs + S5P_ADCMUX);
-		else if (cpu == TYPE_ADCV11 || cpu == TYPE_ADCV12)
-			writel(client->channel & 0xf,
-						adc->regs + S3C2443_ADCMUX);
-		else
-			con |= S3C2410_ADCCON_SELMUX(client->channel);
-	}
-
-	writel(con, adc->regs + S3C2410_ADCCON);
-}
-
-static void s3c_adc_dbgshow(struct adc_device *adc)
-{
-	adc_dbg(adc, "CON=%08x, TSC=%08x, DLY=%08x\n",
-		readl(adc->regs + S3C2410_ADCCON),
-		readl(adc->regs + S3C2410_ADCTSC),
-		readl(adc->regs + S3C2410_ADCDLY));
-}
-
-static void s3c_adc_try(struct adc_device *adc)
-{
-	struct s3c_adc_client *next = adc->ts_pend;
-
-	if (!next && !list_empty(&adc_pending)) {
-		next = list_first_entry(&adc_pending,
-					struct s3c_adc_client, pend);
-		list_del(&next->pend);
-	} else
-		adc->ts_pend = NULL;
-
-	if (next) {
-		adc_dbg(adc, "new client is %p\n", next);
-		adc->cur = next;
-		s3c_adc_select(adc, next);
-		s3c_adc_convert(adc);
-		s3c_adc_dbgshow(adc);
-	}
-}
-
-int s3c_adc_start(struct s3c_adc_client *client,
-		  unsigned int channel, unsigned int nr_samples)
-{
-	struct adc_device *adc = adc_dev;
-	unsigned long flags;
-
-	if (!adc) {
-		printk(KERN_ERR "%s: failed to find adc\n", __func__);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&adc->lock, flags);
-
-	if (client->is_ts && adc->ts_pend) {
-		spin_unlock_irqrestore(&adc->lock, flags);
-		return -EAGAIN;
-	}
-
-	client->channel = channel;
-	client->nr_samples = nr_samples;
-
-	if (client->is_ts)
-		adc->ts_pend = client;
-	else
-		list_add_tail(&client->pend, &adc_pending);
-
-	if (!adc->cur)
-		s3c_adc_try(adc);
-
-	spin_unlock_irqrestore(&adc->lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_adc_start);
-
-static void s3c_convert_done(struct s3c_adc_client *client,
-			     unsigned v, unsigned u, unsigned *left)
-{
-	client->result = v;
-	wake_up(client->wait);
-}
-
-int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
-{
-	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
-	int ret;
-
-	client->convert_cb = s3c_convert_done;
-	client->wait = &wake;
-	client->result = -1;
-
-	ret = s3c_adc_start(client, ch, 1);
-	if (ret < 0)
-		goto err;
-
-	ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
-	if (client->result < 0) {
-		ret = -ETIMEDOUT;
-		goto err;
-	}
-
-	client->convert_cb = NULL;
-	return client->result;
-
-err:
-	return ret;
-}
-EXPORT_SYMBOL_GPL(s3c_adc_read);
-
-static void s3c_adc_default_select(struct s3c_adc_client *client,
-				   unsigned select)
-{
-}
-
-struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
-					void (*select)(struct s3c_adc_client *client,
-						       unsigned int selected),
-					void (*conv)(struct s3c_adc_client *client,
-						     unsigned d0, unsigned d1,
-						     unsigned *samples_left),
-					unsigned int is_ts)
-{
-	struct s3c_adc_client *client;
-
-	WARN_ON(!pdev);
-
-	if (!select)
-		select = s3c_adc_default_select;
-
-	if (!pdev)
-		return ERR_PTR(-EINVAL);
-
-	client = kzalloc(sizeof(*client), GFP_KERNEL);
-	if (!client)
-		return ERR_PTR(-ENOMEM);
-
-	client->pdev = pdev;
-	client->is_ts = is_ts;
-	client->select_cb = select;
-	client->convert_cb = conv;
-
-	return client;
-}
-EXPORT_SYMBOL_GPL(s3c_adc_register);
-
-void s3c_adc_release(struct s3c_adc_client *client)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&adc_dev->lock, flags);
-
-	/* We should really check that nothing is in progress. */
-	if (adc_dev->cur == client)
-		adc_dev->cur = NULL;
-	if (adc_dev->ts_pend == client)
-		adc_dev->ts_pend = NULL;
-	else {
-		struct list_head *p, *n;
-		struct s3c_adc_client *tmp;
-
-		list_for_each_safe(p, n, &adc_pending) {
-			tmp = list_entry(p, struct s3c_adc_client, pend);
-			if (tmp == client)
-				list_del(&tmp->pend);
-		}
-	}
-
-	if (adc_dev->cur == NULL)
-		s3c_adc_try(adc_dev);
-
-	spin_unlock_irqrestore(&adc_dev->lock, flags);
-	kfree(client);
-}
-EXPORT_SYMBOL_GPL(s3c_adc_release);
-
-static irqreturn_t s3c_adc_irq(int irq, void *pw)
-{
-	struct adc_device *adc = pw;
-	struct s3c_adc_client *client = adc->cur;
-	enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
-	unsigned data0, data1;
-
-	if (!client) {
-		dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__);
-		goto exit;
-	}
-
-	data0 = readl(adc->regs + S3C2410_ADCDAT0);
-	data1 = readl(adc->regs + S3C2410_ADCDAT1);
-	adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
-
-	client->nr_samples--;
-
-	if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV11) {
-		data0 &= 0x3ff;
-		data1 &= 0x3ff;
-	} else {
-		/* S3C2416/S3C64XX/S5P ADC resolution is 12-bit */
-		data0 &= 0xfff;
-		data1 &= 0xfff;
-	}
-
-	if (client->convert_cb)
-		(client->convert_cb)(client, data0, data1, &client->nr_samples);
-
-	if (client->nr_samples > 0) {
-		/* fire another conversion for this */
-
-		client->select_cb(client, 1);
-		s3c_adc_convert(adc);
-	} else {
-		spin_lock(&adc->lock);
-		(client->select_cb)(client, 0);
-		adc->cur = NULL;
-
-		s3c_adc_try(adc);
-		spin_unlock(&adc->lock);
-	}
-
-exit:
-	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3) {
-		/* Clear ADC interrupt */
-		writel(0, adc->regs + S3C64XX_ADCCLRINT);
-	}
-	return IRQ_HANDLED;
-}
-
-static int s3c_adc_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct adc_device *adc;
-	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
-	int ret;
-	unsigned tmp;
-
-	adc = devm_kzalloc(dev, sizeof(*adc), GFP_KERNEL);
-	if (!adc)
-		return -ENOMEM;
-
-	spin_lock_init(&adc->lock);
-
-	adc->pdev = pdev;
-	adc->prescale = S3C2410_ADCCON_PRSCVL(49);
-
-	adc->vdd = devm_regulator_get(dev, "vdd");
-	if (IS_ERR(adc->vdd)) {
-		dev_err(dev, "operating without regulator \"vdd\" .\n");
-		return PTR_ERR(adc->vdd);
-	}
-
-	adc->irq = platform_get_irq(pdev, 1);
-	if (adc->irq <= 0)
-		return -ENOENT;
-
-	ret = devm_request_irq(dev, adc->irq, s3c_adc_irq, 0, dev_name(dev),
-				adc);
-	if (ret < 0) {
-		dev_err(dev, "failed to attach adc irq\n");
-		return ret;
-	}
-
-	adc->clk = devm_clk_get(dev, "adc");
-	if (IS_ERR(adc->clk)) {
-		dev_err(dev, "failed to get adc clock\n");
-		return PTR_ERR(adc->clk);
-	}
-
-	adc->regs = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(adc->regs))
-		return PTR_ERR(adc->regs);
-
-	ret = regulator_enable(adc->vdd);
-	if (ret)
-		return ret;
-
-	clk_prepare_enable(adc->clk);
-
-	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
-
-	/* Enable 12-bit ADC resolution */
-	if (cpu == TYPE_ADCV12)
-		tmp |= S3C2416_ADCCON_RESSEL;
-	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
-		tmp |= S3C64XX_ADCCON_RESSEL;
-
-	writel(tmp, adc->regs + S3C2410_ADCCON);
-
-	dev_info(dev, "attached adc driver\n");
-
-	platform_set_drvdata(pdev, adc);
-	adc_dev = adc;
-
-	return 0;
-}
-
-static int s3c_adc_remove(struct platform_device *pdev)
-{
-	struct adc_device *adc = platform_get_drvdata(pdev);
-
-	clk_disable_unprepare(adc->clk);
-	regulator_disable(adc->vdd);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int s3c_adc_suspend(struct device *dev)
-{
-	struct adc_device *adc = dev_get_drvdata(dev);
-	unsigned long flags;
-	u32 con;
-
-	spin_lock_irqsave(&adc->lock, flags);
-
-	con = readl(adc->regs + S3C2410_ADCCON);
-	con |= S3C2410_ADCCON_STDBM;
-	writel(con, adc->regs + S3C2410_ADCCON);
-
-	disable_irq(adc->irq);
-	spin_unlock_irqrestore(&adc->lock, flags);
-	clk_disable(adc->clk);
-	regulator_disable(adc->vdd);
-
-	return 0;
-}
-
-static int s3c_adc_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct adc_device *adc = platform_get_drvdata(pdev);
-	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
-	int ret;
-	unsigned long tmp;
-
-	ret = regulator_enable(adc->vdd);
-	if (ret)
-		return ret;
-	clk_enable(adc->clk);
-	enable_irq(adc->irq);
-
-	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
-
-	/* Enable 12-bit ADC resolution */
-	if (cpu == TYPE_ADCV12)
-		tmp |= S3C2416_ADCCON_RESSEL;
-	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
-		tmp |= S3C64XX_ADCCON_RESSEL;
-
-	writel(tmp, adc->regs + S3C2410_ADCCON);
-
-	return 0;
-}
-
-#else
-#define s3c_adc_suspend NULL
-#define s3c_adc_resume NULL
-#endif
-
-static const struct platform_device_id s3c_adc_driver_ids[] = {
-	{
-		.name           = "s3c24xx-adc",
-		.driver_data    = TYPE_ADCV1,
-	}, {
-		.name		= "s3c2443-adc",
-		.driver_data	= TYPE_ADCV11,
-	}, {
-		.name		= "s3c2416-adc",
-		.driver_data	= TYPE_ADCV12,
-	}, {
-		.name           = "s3c64xx-adc",
-		.driver_data    = TYPE_ADCV2,
-	}, {
-		.name		= "samsung-adc-v3",
-		.driver_data	= TYPE_ADCV3,
-	},
-	{ }
-};
-MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids);
-
-static const struct dev_pm_ops adc_pm_ops = {
-	.suspend	= s3c_adc_suspend,
-	.resume		= s3c_adc_resume,
-};
-
-static struct platform_driver s3c_adc_driver = {
-	.id_table	= s3c_adc_driver_ids,
-	.driver		= {
-		.name	= "s3c-adc",
-		.pm	= &adc_pm_ops,
-	},
-	.probe		= s3c_adc_probe,
-	.remove		= s3c_adc_remove,
-};
-
-static int __init adc_init(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&s3c_adc_driver);
-	if (ret)
-		printk(KERN_ERR "%s: failed to add adc driver\n", __func__);
-
-	return ret;
-}
-
-module_init(adc_init);
diff --git a/arch/arm/mach-s3c/anubis.h b/arch/arm/mach-s3c/anubis.h
deleted file mode 100644
index 13847292e6c7..000000000000
--- a/arch/arm/mach-s3c/anubis.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - CPLD control constants
- * ANUBIS - IRQ Number definitions
- * ANUBIS - Memory map definitions
- */
-
-#ifndef __MACH_S3C24XX_ANUBIS_H
-#define __MACH_S3C24XX_ANUBIS_H __FILE__
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define ANUBIS_CTRL1_NANDSEL		(0x3)
-
-/* IDREG - revision */
-
-#define ANUBIS_IDREG_REVMASK		(0x7)
-
-/* irq */
-
-#define ANUBIS_IRQ_IDE0			IRQ_EINT2
-#define ANUBIS_IRQ_IDE1			IRQ_EINT3
-#define ANUBIS_IRQ_ASIX			IRQ_EINT1
-
-/* map */
-
-/* start peripherals off after the S3C2410 */
-
-#define ANUBIS_IOADDR(x)		(S3C2410_ADDR((x) + 0x01800000))
-
-#define ANUBIS_PA_CPLD			(S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define ANUBIS_VA_CTRL1			ANUBIS_IOADDR(0x00000000)
-#define ANUBIS_PA_CTRL1			ANUBIS_PA_CPLD
-
-#define ANUBIS_VA_IDREG			ANUBIS_IOADDR(0x00300000)
-#define ANUBIS_PA_IDREG			(ANUBIS_PA_CPLD + (3 << 23))
-
-#define ANUBIS_IDEPRI			ANUBIS_IOADDR(0x01000000)
-#define ANUBIS_IDEPRIAUX		ANUBIS_IOADDR(0x01100000)
-#define ANUBIS_IDESEC			ANUBIS_IOADDR(0x01200000)
-#define ANUBIS_IDESECAUX		ANUBIS_IOADDR(0x01300000)
-
-#endif /* __MACH_S3C24XX_ANUBIS_H */
diff --git a/arch/arm/mach-s3c/ata-core-s3c64xx.h b/arch/arm/mach-s3c/ata-core-s3c64xx.h
deleted file mode 100644
index 4863ad9d3a42..000000000000
--- a/arch/arm/mach-s3c/ata-core-s3c64xx.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung CF-ATA Controller core functions
- */
-
-#ifndef __ASM_PLAT_ATA_CORE_S3C64XX_H
-#define __ASM_PLAT_ATA_CORE_S3C64XX_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
-*/
-
-/* re-define device name depending on support. */
-static inline void s3c_cfcon_setname(char *name)
-{
-#ifdef CONFIG_SAMSUNG_DEV_IDE
-	s3c_device_cfcon.name = name;
-#endif
-}
-
-#endif /* __ASM_PLAT_ATA_CORE_S3C64XX_H */
diff --git a/arch/arm/mach-s3c/backlight-s3c64xx.h b/arch/arm/mach-s3c/backlight-s3c64xx.h
deleted file mode 100644
index 2a2b35821d58..000000000000
--- a/arch/arm/mach-s3c/backlight-s3c64xx.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- */
-
-#ifndef __ASM_PLAT_BACKLIGHT_S3C64XX_H
-#define __ASM_PLAT_BACKLIGHT_S3C64XX_H __FILE__
-
-/* samsung_bl_gpio_info - GPIO info for PWM Backlight control
- * @no:		GPIO number for PWM timer out
- * @func:	Special function of GPIO line for PWM timer
- */
-struct samsung_bl_gpio_info {
-	int no;
-	int func;
-};
-
-extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
-	struct platform_pwm_backlight_data *bl_data);
-
-#endif /* __ASM_PLAT_BACKLIGHT_S3C64XX_H */
diff --git a/arch/arm/mach-s3c/bast-ide.c b/arch/arm/mach-s3c/bast-ide.c
deleted file mode 100644
index 67f0adc1fec0..000000000000
--- a/arch/arm/mach-s3c/bast-ide.c
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2007 Simtec Electronics
-//	http://www.simtec.co.uk/products/EB2410ITX/
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "map.h"
-#include "irqs.h"
-
-#include "bast.h"
-
-/* IDE ports */
-
-static struct pata_platform_info bast_ide_platdata = {
-	.ioport_shift	= 5,
-};
-
-static struct resource bast_ide0_resource[] = {
-	[0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRI, 8 * 0x20),
-	[1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20),
-	[2] = DEFINE_RES_IRQ(BAST_IRQ_IDE0),
-};
-
-static struct platform_device bast_device_ide0 = {
-	.name		= "pata_platform",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(bast_ide0_resource),
-	.resource	= bast_ide0_resource,
-	.dev		= {
-		.platform_data = &bast_ide_platdata,
-		.coherent_dma_mask = ~0,
-	}
-
-};
-
-static struct resource bast_ide1_resource[] = {
-	[0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESEC, 8 * 0x20),
-	[1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20),
-	[2] = DEFINE_RES_IRQ(BAST_IRQ_IDE1),
-};
-
-static struct platform_device bast_device_ide1 = {
-	.name		= "pata_platform",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(bast_ide1_resource),
-	.resource	= bast_ide1_resource,
-	.dev		= {
-		.platform_data = &bast_ide_platdata,
-		.coherent_dma_mask = ~0,
-	}
-};
-
-static struct platform_device *bast_ide_devices[] __initdata = {
-	&bast_device_ide0,
-	&bast_device_ide1,
-};
-
-static __init int bast_ide_init(void)
-{
-	if (machine_is_bast() || machine_is_vr1000())
-		return platform_add_devices(bast_ide_devices,
-					    ARRAY_SIZE(bast_ide_devices));
-
-	return 0;
-}
-
-fs_initcall(bast_ide_init);
diff --git a/arch/arm/mach-s3c/bast-irq.c b/arch/arm/mach-s3c/bast-irq.c
deleted file mode 100644
index cfc2ddc65513..000000000000
--- a/arch/arm/mach-s3c/bast-irq.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2003-2005 Simtec Electronics
-//   Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.simtec.co.uk/products/EB2410ITX/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/irq.h>
-
-#include "regs-irq.h"
-#include "irqs.h"
-
-#include "bast.h"
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-/* handle PC104 ISA interrupts from the system CPLD */
-
-/* table of ISA irq nos to the relevant mask... zero means
- * the irq is not implemented
-*/
-static const unsigned char bast_pc104_irqmasks[] = {
-	0,   /* 0 */
-	0,   /* 1 */
-	0,   /* 2 */
-	1,   /* 3 */
-	0,   /* 4 */
-	2,   /* 5 */
-	0,   /* 6 */
-	4,   /* 7 */
-	0,   /* 8 */
-	0,   /* 9 */
-	8,   /* 10 */
-	0,   /* 11 */
-	0,   /* 12 */
-	0,   /* 13 */
-	0,   /* 14 */
-	0,   /* 15 */
-};
-
-static const unsigned char bast_pc104_irqs[] = { 3, 5, 7, 10 };
-
-static void
-bast_pc104_mask(struct irq_data *data)
-{
-	unsigned long temp;
-
-	temp = __raw_readb(BAST_VA_PC104_IRQMASK);
-	temp &= ~bast_pc104_irqmasks[data->irq];
-	__raw_writeb(temp, BAST_VA_PC104_IRQMASK);
-}
-
-static void
-bast_pc104_maskack(struct irq_data *data)
-{
-	struct irq_desc *desc = irq_to_desc(BAST_IRQ_ISA);
-
-	bast_pc104_mask(data);
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-}
-
-static void
-bast_pc104_unmask(struct irq_data *data)
-{
-	unsigned long temp;
-
-	temp = __raw_readb(BAST_VA_PC104_IRQMASK);
-	temp |= bast_pc104_irqmasks[data->irq];
-	__raw_writeb(temp, BAST_VA_PC104_IRQMASK);
-}
-
-static struct irq_chip  bast_pc104_chip = {
-	.irq_mask	= bast_pc104_mask,
-	.irq_unmask	= bast_pc104_unmask,
-	.irq_ack	= bast_pc104_maskack
-};
-
-static void bast_irq_pc104_demux(struct irq_desc *desc)
-{
-	unsigned int stat;
-	unsigned int irqno;
-	int i;
-
-	stat = __raw_readb(BAST_VA_PC104_IRQREQ) & 0xf;
-
-	if (unlikely(stat == 0)) {
-		/* ack if we get an irq with nothing (ie, startup) */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-	} else {
-		/* handle the IRQ */
-
-		for (i = 0; stat != 0; i++, stat >>= 1) {
-			if (stat & 1) {
-				irqno = bast_pc104_irqs[i];
-				generic_handle_irq(irqno);
-			}
-		}
-	}
-}
-
-static __init int bast_irq_init(void)
-{
-	unsigned int i;
-
-	if (machine_is_bast()) {
-		printk(KERN_INFO "BAST PC104 IRQ routing, Copyright 2005 Simtec Electronics\n");
-
-		/* zap all the IRQs */
-
-		__raw_writeb(0x0, BAST_VA_PC104_IRQMASK);
-
-		irq_set_chained_handler(BAST_IRQ_ISA, bast_irq_pc104_demux);
-
-		/* register our IRQs */
-
-		for (i = 0; i < 4; i++) {
-			unsigned int irqno = bast_pc104_irqs[i];
-
-			irq_set_chip_and_handler(irqno, &bast_pc104_chip,
-						 handle_level_irq);
-			irq_clear_status_flags(irqno, IRQ_NOREQUEST);
-		}
-	}
-
-	return 0;
-}
-
-arch_initcall(bast_irq_init);
diff --git a/arch/arm/mach-s3c/bast.h b/arch/arm/mach-s3c/bast.h
deleted file mode 100644
index a7726f93f5eb..000000000000
--- a/arch/arm/mach-s3c/bast.h
+++ /dev/null
@@ -1,194 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * BAST - CPLD control constants
- * BAST - IRQ Number definitions
- * BAST - Memory map definitions
- */
-
-#ifndef __MACH_S3C24XX_BAST_H
-#define __MACH_S3C24XX_BAST_H __FILE__
-
-/* CTRL1 - Audio LR routing */
-
-#define BAST_CPLD_CTRL1_LRCOFF		(0x00)
-#define BAST_CPLD_CTRL1_LRCADC		(0x01)
-#define BAST_CPLD_CTRL1_LRCDAC		(0x02)
-#define BAST_CPLD_CTRL1_LRCARM		(0x03)
-#define BAST_CPLD_CTRL1_LRMASK		(0x03)
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define BAST_CPLD_CTRL2_WNAND		(0x04)
-#define BAST_CPLD_CTLR2_IDERST		(0x08)
-
-/* CTRL3 - rom write control, CPLD identity */
-
-#define BAST_CPLD_CTRL3_IDMASK		(0x0e)
-#define BAST_CPLD_CTRL3_ROMWEN		(0x01)
-
-/* CTRL4 - 8bit LCD interface control/status */
-
-#define BAST_CPLD_CTRL4_LLAT		(0x01)
-#define BAST_CPLD_CTRL4_LCDRW		(0x02)
-#define BAST_CPLD_CTRL4_LCDCMD		(0x04)
-#define BAST_CPLD_CTRL4_LCDE2		(0x01)
-
-/* CTRL5 - DMA routing */
-
-#define BAST_CPLD_DMA0_PRIIDE		(0)
-#define BAST_CPLD_DMA0_SECIDE		(1)
-#define BAST_CPLD_DMA0_ISA15		(2)
-#define BAST_CPLD_DMA0_ISA36		(3)
-
-#define BAST_CPLD_DMA1_PRIIDE		(0 << 2)
-#define BAST_CPLD_DMA1_SECIDE		(1 << 2)
-#define BAST_CPLD_DMA1_ISA15		(2 << 2)
-#define BAST_CPLD_DMA1_ISA36		(3 << 2)
-
-/* irq numbers to onboard peripherals */
-
-#define BAST_IRQ_USBOC			IRQ_EINT18
-#define BAST_IRQ_IDE0			IRQ_EINT16
-#define BAST_IRQ_IDE1			IRQ_EINT17
-#define BAST_IRQ_PCSERIAL1		IRQ_EINT15
-#define BAST_IRQ_PCSERIAL2		IRQ_EINT14
-#define BAST_IRQ_PCPARALLEL		IRQ_EINT13
-#define BAST_IRQ_ASIX			IRQ_EINT11
-#define BAST_IRQ_DM9000			IRQ_EINT10
-#define BAST_IRQ_ISA			IRQ_EINT9
-#define BAST_IRQ_SMALERT		IRQ_EINT8
-
-/* map */
-
-/*
- * ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#define BAST_IOADDR(x)			(S3C2410_ADDR((x) + 0x01300000))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define BAST_VA_CTRL1			BAST_IOADDR(0x00000000)
-#define BAST_PA_CTRL1			(S3C2410_CS5 | 0x7800000)
-
-#define BAST_VA_CTRL2			BAST_IOADDR(0x00100000)
-#define BAST_PA_CTRL2			(S3C2410_CS1 | 0x6000000)
-
-#define BAST_VA_CTRL3			BAST_IOADDR(0x00200000)
-#define BAST_PA_CTRL3			(S3C2410_CS1 | 0x6800000)
-
-#define BAST_VA_CTRL4			BAST_IOADDR(0x00300000)
-#define BAST_PA_CTRL4			(S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define BAST_PA_PC104_IRQREQ		(S3C2410_CS5 | 0x6000000)
-#define BAST_VA_PC104_IRQREQ		BAST_IOADDR(0x00400000)
-
-#define BAST_PA_PC104_IRQRAW		(S3C2410_CS5 | 0x6800000)
-#define BAST_VA_PC104_IRQRAW		BAST_IOADDR(0x00500000)
-
-#define BAST_PA_PC104_IRQMASK		(S3C2410_CS5 | 0x7000000)
-#define BAST_VA_PC104_IRQMASK		BAST_IOADDR(0x00600000)
-
-#define BAST_PA_LCD_RCMD1		(0x8800000)
-#define BAST_VA_LCD_RCMD1		BAST_IOADDR(0x00700000)
-
-#define BAST_PA_LCD_WCMD1		(0x8000000)
-#define BAST_VA_LCD_WCMD1		BAST_IOADDR(0x00800000)
-
-#define BAST_PA_LCD_RDATA1		(0x9800000)
-#define BAST_VA_LCD_RDATA1		BAST_IOADDR(0x00900000)
-
-#define BAST_PA_LCD_WDATA1		(0x9000000)
-#define BAST_VA_LCD_WDATA1		BAST_IOADDR(0x00A00000)
-
-#define BAST_PA_LCD_RCMD2		(0xA800000)
-#define BAST_VA_LCD_RCMD2		BAST_IOADDR(0x00B00000)
-
-#define BAST_PA_LCD_WCMD2		(0xA000000)
-#define BAST_VA_LCD_WCMD2		BAST_IOADDR(0x00C00000)
-
-#define BAST_PA_LCD_RDATA2		(0xB800000)
-#define BAST_VA_LCD_RDATA2		BAST_IOADDR(0x00D00000)
-
-#define BAST_PA_LCD_WDATA2		(0xB000000)
-#define BAST_VA_LCD_WDATA2		BAST_IOADDR(0x00E00000)
-
-
-/*
- * 0xE0000000 contains the IO space that is split by speed and
- * whether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000  8bit,  slow
- * 0x04000000 to 0x08000000  16bit, slow
- * 0x08000000 to 0x0C000000  16bit, net
- * 0x0C000000 to 0x10000000  16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x00000000 to 0x01000000 16MB ISA IO space
- * 0x01000000 to 0x02000000 16MB ISA memory space
- * 0x02000000 to 0x02100000 1MB  IDE primary channel
- * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB  IDE secondary channel
- * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
- * 0x02400000 to 0x02500000 1MB  ASIX ethernet controller
- * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controller
- * 0x02600000 to 0x02700000 1MB  PC SuperIO controller
- *
- * the phyiscal layout of the zones are:
- *  nGCS2 - 8bit, slow
- *  nGCS3 - 16bit, slow
- *  nGCS4 - 16bit, net
- *  nGCS5 - 16bit, fast
- */
-
-#define BAST_VA_MULTISPACE		(0xE0000000)
-
-#define BAST_VA_ISAIO			(BAST_VA_MULTISPACE + 0x00000000)
-#define BAST_VA_ISAMEM			(BAST_VA_MULTISPACE + 0x01000000)
-#define BAST_VA_IDEPRI			(BAST_VA_MULTISPACE + 0x02000000)
-#define BAST_VA_IDEPRIAUX		(BAST_VA_MULTISPACE + 0x02100000)
-#define BAST_VA_IDESEC			(BAST_VA_MULTISPACE + 0x02200000)
-#define BAST_VA_IDESECAUX		(BAST_VA_MULTISPACE + 0x02300000)
-#define BAST_VA_ASIXNET			(BAST_VA_MULTISPACE + 0x02400000)
-#define BAST_VA_DM9000			(BAST_VA_MULTISPACE + 0x02500000)
-#define BAST_VA_SUPERIO			(BAST_VA_MULTISPACE + 0x02600000)
-
-#define BAST_VAM_CS2			(0x00000000)
-#define BAST_VAM_CS3			(0x04000000)
-#define BAST_VAM_CS4			(0x08000000)
-#define BAST_VAM_CS5			(0x0C000000)
-
-/* physical offset addresses for the peripherals */
-
-#define BAST_PA_ISAIO			(0x00000000)
-#define BAST_PA_ASIXNET			(0x01000000)
-#define BAST_PA_SUPERIO			(0x01800000)
-#define BAST_PA_IDEPRI			(0x02000000)
-#define BAST_PA_IDEPRIAUX		(0x02800000)
-#define BAST_PA_IDESEC			(0x03000000)
-#define BAST_PA_IDESECAUX		(0x03800000)
-#define BAST_PA_ISAMEM			(0x04000000)
-#define BAST_PA_DM9000			(0x05000000)
-
-/* some configurations for the peripherals */
-
-#define BAST_PCSIO			(BAST_VA_SUPERIO + BAST_VAM_CS2)
-
-#define BAST_ASIXNET_CS			BAST_VAM_CS5
-#define BAST_DM9000_CS			BAST_VAM_CS4
-
-#define BAST_IDE_CS	S3C2410_CS5
-
-#endif /* __MACH_S3C24XX_BAST_H */
diff --git a/arch/arm/mach-s3c/common-smdk-s3c24xx.c b/arch/arm/mach-s3c/common-smdk-s3c24xx.c
deleted file mode 100644
index 6d124bbd384c..000000000000
--- a/arch/arm/mach-s3c/common-smdk-s3c24xx.c
+++ /dev/null
@@ -1,228 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// Common code for SMDK2410 and SMDK2440 boards
-//
-// http://www.fluff.org/ben/smdk2440/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include <linux/platform_data/leds-s3c24xx.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-
-#include "gpio-cfg.h"
-#include "devs.h"
-#include "pm.h"
-
-#include "common-smdk-s3c24xx.h"
-
-/* LED devices */
-
-static struct gpiod_lookup_table smdk_led4_gpio_table = {
-	.dev_id = "s3c24xx_led.0",
-	.table = {
-		GPIO_LOOKUP("GPF", 4, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table smdk_led5_gpio_table = {
-	.dev_id = "s3c24xx_led.1",
-	.table = {
-		GPIO_LOOKUP("GPF", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table smdk_led6_gpio_table = {
-	.dev_id = "s3c24xx_led.2",
-	.table = {
-		GPIO_LOOKUP("GPF", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table smdk_led7_gpio_table = {
-	.dev_id = "s3c24xx_led.3",
-	.table = {
-		GPIO_LOOKUP("GPF", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led4 = {
-	.name		= "led4",
-	.def_trigger	= "timer",
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led5 = {
-	.name		= "led5",
-	.def_trigger	= "nand-disk",
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led6 = {
-	.name		= "led6",
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led7 = {
-	.name		= "led7",
-};
-
-static struct platform_device smdk_led4 = {
-	.name		= "s3c24xx_led",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &smdk_pdata_led4,
-	},
-};
-
-static struct platform_device smdk_led5 = {
-	.name		= "s3c24xx_led",
-	.id		= 1,
-	.dev		= {
-		.platform_data = &smdk_pdata_led5,
-	},
-};
-
-static struct platform_device smdk_led6 = {
-	.name		= "s3c24xx_led",
-	.id		= 2,
-	.dev		= {
-		.platform_data = &smdk_pdata_led6,
-	},
-};
-
-static struct platform_device smdk_led7 = {
-	.name		= "s3c24xx_led",
-	.id		= 3,
-	.dev		= {
-		.platform_data = &smdk_pdata_led7,
-	},
-};
-
-/* NAND parititon from 2.4.18-swl5 */
-
-static struct mtd_partition smdk_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_16K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "S3C2410 flash partition 1",
-		.offset = 0,
-		.size	= SZ_2M,
-	},
-	[2] = {
-		.name	= "S3C2410 flash partition 2",
-		.offset = SZ_4M,
-		.size	= SZ_4M,
-	},
-	[3] = {
-		.name	= "S3C2410 flash partition 3",
-		.offset	= SZ_8M,
-		.size	= SZ_2M,
-	},
-	[4] = {
-		.name	= "S3C2410 flash partition 4",
-		.offset = SZ_1M * 10,
-		.size	= SZ_4M,
-	},
-	[5] = {
-		.name	= "S3C2410 flash partition 5",
-		.offset	= SZ_1M * 14,
-		.size	= SZ_1M * 10,
-	},
-	[6] = {
-		.name	= "S3C2410 flash partition 6",
-		.offset	= SZ_1M * 24,
-		.size	= SZ_1M * 24,
-	},
-	[7] = {
-		.name	= "S3C2410 flash partition 7",
-		.offset = SZ_1M * 48,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct s3c2410_nand_set smdk_nand_sets[] = {
-	[0] = {
-		.name		= "NAND",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(smdk_default_nand_part),
-		.partitions	= smdk_default_nand_part,
-	},
-};
-
-/* choose a set of timings which should suit most 512Mbit
- * chips and beyond.
-*/
-
-static struct s3c2410_platform_nand smdk_nand_info = {
-	.tacls		= 20,
-	.twrph0		= 60,
-	.twrph1		= 20,
-	.nr_sets	= ARRAY_SIZE(smdk_nand_sets),
-	.sets		= smdk_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-/* devices we initialise */
-
-static struct platform_device __initdata *smdk_devs[] = {
-	&s3c_device_nand,
-	&smdk_led4,
-	&smdk_led5,
-	&smdk_led6,
-	&smdk_led7,
-};
-
-void __init smdk_machine_init(void)
-{
-	if (machine_is_smdk2443())
-		smdk_nand_info.twrph0 = 50;
-
-	s3c_nand_set_platdata(&smdk_nand_info);
-
-	/* Disable pull-up on the LED lines */
-	s3c_gpio_setpull(S3C2410_GPF(4), S3C_GPIO_PULL_NONE);
-	s3c_gpio_setpull(S3C2410_GPF(5), S3C_GPIO_PULL_NONE);
-	s3c_gpio_setpull(S3C2410_GPF(6), S3C_GPIO_PULL_NONE);
-	s3c_gpio_setpull(S3C2410_GPF(7), S3C_GPIO_PULL_NONE);
-
-	/* Add lookups for the lines */
-	gpiod_add_lookup_table(&smdk_led4_gpio_table);
-	gpiod_add_lookup_table(&smdk_led5_gpio_table);
-	gpiod_add_lookup_table(&smdk_led6_gpio_table);
-	gpiod_add_lookup_table(&smdk_led7_gpio_table);
-
-	platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
-
-	s3c_pm_init();
-}
diff --git a/arch/arm/mach-s3c/common-smdk-s3c24xx.h b/arch/arm/mach-s3c/common-smdk-s3c24xx.h
deleted file mode 100644
index c0352b06e435..000000000000
--- a/arch/arm/mach-s3c/common-smdk-s3c24xx.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Common code for SMDK2410 and SMDK2440 boards
- *
- * http://www.fluff.org/ben/smdk2440/
- */
-
-extern void smdk_machine_init(void);
diff --git a/arch/arm/mach-s3c/cpu.h b/arch/arm/mach-s3c/cpu.h
index 20ff98d05c53..a0187606b999 100644
--- a/arch/arm/mach-s3c/cpu.h
+++ b/arch/arm/mach-s3c/cpu.h
@@ -16,15 +16,6 @@
 
 extern unsigned long samsung_cpu_id;
 
-#define S3C2410_CPU_ID		0x32410000
-#define S3C2410_CPU_MASK	0xFFFFFFFF
-
-#define S3C24XX_CPU_ID		0x32400000
-#define S3C24XX_CPU_MASK	0xFFF00000
-
-#define S3C2412_CPU_ID		0x32412000
-#define S3C2412_CPU_MASK	0xFFFFF000
-
 #define S3C6400_CPU_ID		0x36400000
 #define S3C6410_CPU_ID		0x36410000
 #define S3C64XX_CPU_MASK	0xFFFFF000
@@ -38,29 +29,9 @@ static inline int is_samsung_##name(void)	\
 	return ((samsung_cpu_id & mask) == (id & mask));	\
 }
 
-IS_SAMSUNG_CPU(s3c2410, S3C2410_CPU_ID, S3C2410_CPU_MASK)
-IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
-IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK)
 IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
 
-#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
-    defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
-    defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
-    defined(CONFIG_CPU_S3C2443)
-# define soc_is_s3c24xx()	is_samsung_s3c24xx()
-# define soc_is_s3c2410()	is_samsung_s3c2410()
-#else
-# define soc_is_s3c24xx()	0
-# define soc_is_s3c2410()	0
-#endif
-
-#if defined(CONFIG_CPU_S3C2412)
-# define soc_is_s3c2412()	is_samsung_s3c2412()
-#else
-# define soc_is_s3c2412()	0
-#endif
-
 #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
 # define soc_is_s3c6400()	is_samsung_s3c6400()
 # define soc_is_s3c6410()	is_samsung_s3c6410()
@@ -71,12 +42,6 @@ IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
 # define soc_is_s3c64xx()	0
 #endif
 
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
-
-#ifndef KHZ
-#define KHZ (1000)
-#endif
-
 #ifndef MHZ
 #define MHZ (1000*1000)
 #endif
@@ -96,7 +61,6 @@ struct cpu_table {
 	unsigned long	idmask;
 	void		(*map_io)(void);
 	void		(*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
-	void		(*init_clocks)(int xtal);
 	int		(*init)(void);
 	const char	*name;
 };
@@ -105,24 +69,13 @@ extern void s3c_init_cpu(unsigned long idcode,
 			 struct cpu_table *cpus, unsigned int cputab_size);
 
 /* core initialisation functions */
-
-extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
-
 extern void s3c64xx_init_cpu(void);
 
 extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c24xx_init_clocks(int xtal);
-
 extern void s3c24xx_init_uartdevs(char *name,
 				  struct s3c24xx_uart_resources *res,
 				  struct s3c2410_uartcfg *cfg, int no);
 
-extern struct syscore_ops s3c2410_pm_syscore_ops;
-extern struct syscore_ops s3c2412_pm_syscore_ops;
-extern struct syscore_ops s3c2416_pm_syscore_ops;
-extern struct syscore_ops s3c244x_pm_syscore_ops;
-
-extern struct bus_type s3c6410_subsys;
+extern const struct bus_type s3c6410_subsys;
 
 #endif
diff --git a/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c b/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c
deleted file mode 100644
index c1784d8facdf..000000000000
--- a/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2009 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/cpufreq.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-
-#include "map.h"
-#include "regs-clock.h"
-
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-
-#include "regs-mem-s3c24xx.h"
-
-/**
- * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
- * @cfg: The frequency configuration
- *
- * Set the SDRAM refresh value appropriately for the configured
- * frequency.
- */
-void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
-	struct s3c_cpufreq_board *board = cfg->board;
-	unsigned long refresh;
-	unsigned long refval;
-
-	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
-	 * down to ensure that we do not overflow 32 bit numbers.
-	 *
-	 * This should work for HCLK up to 133MHz and refresh period up
-	 * to 30usec.
-	 */
-
-	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
-	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
-	refresh = (1 << 11) + 1 - refresh;
-
-	s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
-
-	refval = __raw_readl(S3C2410_REFRESH);
-	refval &= ~((1 << 12) - 1);
-	refval |= refresh;
-	__raw_writel(refval, S3C2410_REFRESH);
-}
-
-/**
- * s3c2410_set_fvco - set the PLL value
- * @cfg: The frequency configuration
- */
-void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
-{
-	if (!IS_ERR(cfg->mpll))
-		clk_set_rate(cfg->mpll, cfg->pll.frequency);
-}
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-u32 s3c2440_read_camdivn(void)
-{
-	return __raw_readl(S3C2440_CAMDIVN);
-}
-
-void s3c2440_write_camdivn(u32 camdiv)
-{
-	__raw_writel(camdiv, S3C2440_CAMDIVN);
-}
-#endif
-
-u32 s3c24xx_read_clkdivn(void)
-{
-	return __raw_readl(S3C2410_CLKDIVN);
-}
-
-void s3c24xx_write_clkdivn(u32 clkdiv)
-{
-	__raw_writel(clkdiv, S3C2410_CLKDIVN);
-}
-
-u32 s3c24xx_read_mpllcon(void)
-{
-	return __raw_readl(S3C2410_MPLLCON);
-}
-
-void s3c24xx_write_locktime(u32 locktime)
-{
-	return __raw_writel(locktime, S3C2410_LOCKTIME);
-}
diff --git a/arch/arm/mach-s3c/cpuidle-s3c64xx.c b/arch/arm/mach-s3c/cpuidle-s3c64xx.c
index b1c5f43d4922..27a13cc27893 100644
--- a/arch/arm/mach-s3c/cpuidle-s3c64xx.c
+++ b/arch/arm/mach-s3c/cpuidle-s3c64xx.c
@@ -19,9 +19,8 @@
 #include "regs-sys-s3c64xx.h"
 #include "regs-syscon-power-s3c64xx.h"
 
-static int s3c64xx_enter_idle(struct cpuidle_device *dev,
-			      struct cpuidle_driver *drv,
-			      int index)
+static __cpuidle int s3c64xx_enter_idle(struct cpuidle_device *dev,
+					struct cpuidle_driver *drv, int index)
 {
 	unsigned long tmp;
 
diff --git a/arch/arm/mach-s3c/dev-audio-s3c64xx.c b/arch/arm/mach-s3c/dev-audio-s3c64xx.c
index 909e82c148ba..7ce119dc3a72 100644
--- a/arch/arm/mach-s3c/dev-audio-s3c64xx.c
+++ b/arch/arm/mach-s3c/dev-audio-s3c64xx.c
@@ -83,130 +83,3 @@ struct platform_device s3c64xx_device_iis1 = {
 	},
 };
 EXPORT_SYMBOL(s3c64xx_device_iis1);
-
-static struct resource s3c64xx_iisv4_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_IISV4, SZ_256),
-};
-
-static struct s3c_audio_pdata i2sv4_pdata = {
-	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
-	.type = {
-		.quirks = QUIRK_PRI_6CHAN,
-	},
-};
-
-struct platform_device s3c64xx_device_iisv4 = {
-	.name = "samsung-i2s",
-	.id = 2,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
-	.resource	  = s3c64xx_iisv4_resource,
-	.dev = {
-		.platform_data = &i2sv4_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_iisv4);
-
-
-/* PCM Controller platform_devices */
-
-static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
-{
-	unsigned int base;
-
-	switch (pdev->id) {
-	case 0:
-		base = S3C64XX_GPD(0);
-		break;
-	case 1:
-		base = S3C64XX_GPE(0);
-		break;
-	default:
-		printk(KERN_DEBUG "Invalid PCM Controller number: %d\n",
-			pdev->id);
-		return -EINVAL;
-	}
-
-	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
-	return 0;
-}
-
-static struct resource s3c64xx_pcm0_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_PCM0, SZ_256),
-};
-
-static struct s3c_audio_pdata s3c_pcm0_pdata = {
-	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm0 = {
-	.name		  = "samsung-pcm",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm0_resource),
-	.resource	  = s3c64xx_pcm0_resource,
-	.dev = {
-		.platform_data = &s3c_pcm0_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm0);
-
-static struct resource s3c64xx_pcm1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_PCM1, SZ_256),
-};
-
-static struct s3c_audio_pdata s3c_pcm1_pdata = {
-	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm1 = {
-	.name		  = "samsung-pcm",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm1_resource),
-	.resource	  = s3c64xx_pcm1_resource,
-	.dev = {
-		.platform_data = &s3c_pcm1_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm1);
-
-/* AC97 Controller platform devices */
-
-static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev)
-{
-	return s3c_gpio_cfgpin_range(S3C64XX_GPD(0), 5, S3C_GPIO_SFN(4));
-}
-
-static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
-{
-	return s3c_gpio_cfgpin_range(S3C64XX_GPE(0), 5, S3C_GPIO_SFN(4));
-}
-
-static struct resource s3c64xx_ac97_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_AC97, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_AC97),
-};
-
-static struct s3c_audio_pdata s3c_ac97_pdata = {
-};
-
-static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s3c64xx_device_ac97 = {
-	.name		  = "samsung-ac97",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_ac97_resource),
-	.resource	  = s3c64xx_ac97_resource,
-	.dev = {
-		.platform_data = &s3c_ac97_pdata,
-		.dma_mask = &s3c64xx_ac97_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_ac97);
-
-void __init s3c64xx_ac97_setup_gpio(int num)
-{
-	if (num == S3C64XX_AC97_GPD)
-		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpd;
-	else
-		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpe;
-}
diff --git a/arch/arm/mach-s3c/dev-backlight-s3c64xx.c b/arch/arm/mach-s3c/dev-backlight-s3c64xx.c
deleted file mode 100644
index 65488b61e50c..000000000000
--- a/arch/arm/mach-s3c/dev-backlight-s3c64xx.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2011 Samsung Electronics Co., Ltd.
-//              http://www.samsung.com
-//
-// Common infrastructure for PWM Backlight for Samsung boards
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/pwm_backlight.h>
-
-#include "devs.h"
-#include "gpio-cfg.h"
-
-#include "backlight-s3c64xx.h"
-
-struct samsung_bl_drvdata {
-	struct platform_pwm_backlight_data plat_data;
-	struct samsung_bl_gpio_info *gpio_info;
-};
-
-static int samsung_bl_init(struct device *dev)
-{
-	int ret = 0;
-	struct platform_pwm_backlight_data *pdata = dev->platform_data;
-	struct samsung_bl_drvdata *drvdata = container_of(pdata,
-					struct samsung_bl_drvdata, plat_data);
-	struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
-
-	ret = gpio_request(bl_gpio_info->no, "Backlight");
-	if (ret) {
-		printk(KERN_ERR "failed to request GPIO for LCD Backlight\n");
-		return ret;
-	}
-
-	/* Configure GPIO pin with specific GPIO function for PWM timer */
-	s3c_gpio_cfgpin(bl_gpio_info->no, bl_gpio_info->func);
-
-	return 0;
-}
-
-static void samsung_bl_exit(struct device *dev)
-{
-	struct platform_pwm_backlight_data *pdata = dev->platform_data;
-	struct samsung_bl_drvdata *drvdata = container_of(pdata,
-					struct samsung_bl_drvdata, plat_data);
-	struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
-
-	s3c_gpio_cfgpin(bl_gpio_info->no, S3C_GPIO_OUTPUT);
-	gpio_free(bl_gpio_info->no);
-}
-
-/* Initialize few important fields of platform_pwm_backlight_data
- * structure with default values. These fields can be overridden by
- * board-specific values sent from machine file.
- * For ease of operation, these fields are initialized with values
- * used by most samsung boards.
- * Users has the option of sending info about other parameters
- * for their specific boards
- */
-
-static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = {
-	.plat_data = {
-		.max_brightness = 255,
-		.dft_brightness = 255,
-		.init           = samsung_bl_init,
-		.exit           = samsung_bl_exit,
-	},
-};
-
-static struct platform_device samsung_dfl_bl_device __initdata = {
-	.name		= "pwm-backlight",
-};
-
-/* samsung_bl_set - Set board specific data (if any) provided by user for
- * PWM Backlight control and register specific PWM and backlight device.
- * @gpio_info:	structure containing GPIO info for PWM timer
- * @bl_data:	structure containing Backlight control data
- */
-void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
-	struct platform_pwm_backlight_data *bl_data)
-{
-	int ret = 0;
-	struct platform_device *samsung_bl_device;
-	struct samsung_bl_drvdata *samsung_bl_drvdata;
-	struct platform_pwm_backlight_data *samsung_bl_data;
-
-	samsung_bl_device = kmemdup(&samsung_dfl_bl_device,
-			sizeof(struct platform_device), GFP_KERNEL);
-	if (!samsung_bl_device)
-		return;
-
-	samsung_bl_drvdata = kmemdup(&samsung_dfl_bl_data,
-				sizeof(samsung_dfl_bl_data), GFP_KERNEL);
-	if (!samsung_bl_drvdata)
-		goto err_data;
-
-	samsung_bl_device->dev.platform_data = &samsung_bl_drvdata->plat_data;
-	samsung_bl_drvdata->gpio_info = gpio_info;
-	samsung_bl_data = &samsung_bl_drvdata->plat_data;
-
-	/* Copy board specific data provided by user */
-	samsung_bl_device->dev.parent = &samsung_device_pwm.dev;
-
-	if (bl_data->max_brightness)
-		samsung_bl_data->max_brightness = bl_data->max_brightness;
-	if (bl_data->dft_brightness)
-		samsung_bl_data->dft_brightness = bl_data->dft_brightness;
-	if (bl_data->lth_brightness)
-		samsung_bl_data->lth_brightness = bl_data->lth_brightness;
-	if (bl_data->init)
-		samsung_bl_data->init = bl_data->init;
-	if (bl_data->notify)
-		samsung_bl_data->notify = bl_data->notify;
-	if (bl_data->notify_after)
-		samsung_bl_data->notify_after = bl_data->notify_after;
-	if (bl_data->exit)
-		samsung_bl_data->exit = bl_data->exit;
-	if (bl_data->check_fb)
-		samsung_bl_data->check_fb = bl_data->check_fb;
-
-	/* Register the Backlight dev */
-	ret = platform_device_register(samsung_bl_device);
-	if (ret) {
-		printk(KERN_ERR "failed to register backlight device: %d\n", ret);
-		goto err_plat_reg2;
-	}
-
-	return;
-
-err_plat_reg2:
-	kfree(samsung_bl_data);
-err_data:
-	kfree(samsung_bl_device);
-}
diff --git a/arch/arm/mach-s3c/devs.c b/arch/arm/mach-s3c/devs.c
index 9ac07c023adf..bab2abd8a34a 100644
--- a/arch/arm/mach-s3c/devs.c
+++ b/arch/arm/mach-s3c/devs.c
@@ -19,19 +19,11 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/dma-mapping.h>
-#include <linux/fb.h>
 #include <linux/gfp.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
-#include <linux/mtd/partitions.h>
 #include <linux/mmc/host.h>
 #include <linux/ioport.h>
 #include <linux/sizes.h>
-#include <linux/platform_data/s3c-hsudc.h>
 #include <linux/platform_data/s3c-hsotg.h>
-#include <linux/platform_data/dma-s3c24xx.h>
-
-#include <linux/platform_data/media/s5p_hdmi.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -43,104 +35,19 @@
 #include "gpio-samsung.h"
 #include "gpio-cfg.h"
 
-#ifdef CONFIG_PLAT_S3C24XX
-#include "regs-s3c2443-clock.h"
-#endif /* CONFIG_PLAT_S3C24XX */
-
 #include "cpu.h"
 #include "devs.h"
-#include <linux/soc/samsung/s3c-adc.h>
-#include <linux/platform_data/ata-samsung_cf.h>
 #include "fb.h"
-#include <linux/platform_data/fb-s3c2410.h>
-#include <linux/platform_data/hwmon-s3c.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include "keypad.h"
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include "pwm-core.h"
 #include "sdhci.h"
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/usb-ohci-s3c2410.h>
 #include "usb-phy.h"
 #include <linux/platform_data/asoc-s3c.h>
 #include <linux/platform_data/spi-s3c64xx.h>
 
 #define samsung_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) }))
 
-/* AC97 */
-#ifdef CONFIG_CPU_S3C2440
-static struct resource s3c_ac97_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2440_PA_AC97, S3C2440_SZ_AC97),
-	[1] = DEFINE_RES_IRQ(IRQ_S3C244X_AC97),
-};
-
-struct platform_device s3c_device_ac97 = {
-	.name		= "samsung-ac97",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_ac97_resource),
-	.resource	= s3c_ac97_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_CPU_S3C2440 */
-
-/* ADC */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_adc_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
-	[1] = DEFINE_RES_IRQ(IRQ_TC),
-	[2] = DEFINE_RES_IRQ(IRQ_ADC),
-};
-
-struct platform_device s3c_device_adc = {
-	.name		= "s3c24xx-adc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
-	.resource	= s3c_adc_resource,
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#if defined(CONFIG_SAMSUNG_DEV_ADC)
-static struct resource s3c_adc_resource[] = {
-	[0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_ADC),
-	[2] = DEFINE_RES_IRQ(IRQ_TC),
-};
-
-struct platform_device s3c_device_adc = {
-	.name		= "exynos-adc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
-	.resource	= s3c_adc_resource,
-};
-#endif /* CONFIG_SAMSUNG_DEV_ADC */
-
-/* Camif Controller */
-
-#ifdef CONFIG_CPU_S3C2440
-static struct resource s3c_camif_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF),
-	[1] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_C),
-	[2] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_P),
-};
-
-struct platform_device s3c_device_camif = {
-	.name		= "s3c2440-camif",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_camif_resource),
-	.resource	= s3c_camif_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_CPU_S3C2440 */
-
 /* FB */
 
 #ifdef CONFIG_S3C_DEV_FB
@@ -169,22 +76,6 @@ void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
 }
 #endif /* CONFIG_S3C_DEV_FB */
 
-/* HWMON */
-
-#ifdef CONFIG_S3C_DEV_HWMON
-struct platform_device s3c_device_hwmon = {
-	.name		= "s3c-hwmon",
-	.id		= -1,
-	.dev.parent	= &s3c_device_adc.dev,
-};
-
-void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd)
-{
-	s3c_set_platdata(pd, sizeof(struct s3c_hwmon_pdata),
-			 &s3c_device_hwmon);
-}
-#endif /* CONFIG_S3C_DEV_HWMON */
-
 /* HSMMC */
 
 #ifdef CONFIG_S3C_DEV_HSMMC
@@ -374,220 +265,6 @@ void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
 }
 #endif /* CONFIG_S3C_DEV_I2C1 */
 
-#ifdef CONFIG_S3C_DEV_I2C2
-static struct resource s3c_i2c2_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC2, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC2),
-};
-
-struct platform_device s3c_device_i2c2 = {
-	.name		= "s3c2410-i2c",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(s3c_i2c2_resource),
-	.resource	= s3c_i2c2_resource,
-};
-
-void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 2;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c2);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c2_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C2 */
-
-#ifdef CONFIG_S3C_DEV_I2C3
-static struct resource s3c_i2c3_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC3, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC3),
-};
-
-struct platform_device s3c_device_i2c3 = {
-	.name		= "s3c2440-i2c",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(s3c_i2c3_resource),
-	.resource	= s3c_i2c3_resource,
-};
-
-void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 3;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c3);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c3_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C3 */
-
-#ifdef CONFIG_S3C_DEV_I2C4
-static struct resource s3c_i2c4_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC4, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC4),
-};
-
-struct platform_device s3c_device_i2c4 = {
-	.name		= "s3c2440-i2c",
-	.id		= 4,
-	.num_resources	= ARRAY_SIZE(s3c_i2c4_resource),
-	.resource	= s3c_i2c4_resource,
-};
-
-void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 4;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c4);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c4_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C4 */
-
-#ifdef CONFIG_S3C_DEV_I2C5
-static struct resource s3c_i2c5_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC5, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC5),
-};
-
-struct platform_device s3c_device_i2c5 = {
-	.name		= "s3c2440-i2c",
-	.id		= 5,
-	.num_resources	= ARRAY_SIZE(s3c_i2c5_resource),
-	.resource	= s3c_i2c5_resource,
-};
-
-void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 5;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c5);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c5_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C5 */
-
-#ifdef CONFIG_S3C_DEV_I2C6
-static struct resource s3c_i2c6_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC6, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC6),
-};
-
-struct platform_device s3c_device_i2c6 = {
-	.name		= "s3c2440-i2c",
-	.id		= 6,
-	.num_resources	= ARRAY_SIZE(s3c_i2c6_resource),
-	.resource	= s3c_i2c6_resource,
-};
-
-void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 6;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c6);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c6_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C6 */
-
-#ifdef CONFIG_S3C_DEV_I2C7
-static struct resource s3c_i2c7_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC7, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC7),
-};
-
-struct platform_device s3c_device_i2c7 = {
-	.name		= "s3c2440-i2c",
-	.id		= 7,
-	.num_resources	= ARRAY_SIZE(s3c_i2c7_resource),
-	.resource	= s3c_i2c7_resource,
-};
-
-void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 7;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c7);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c7_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C7 */
-
-/* I2S */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_iis_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_IIS, S3C24XX_SZ_IIS),
-};
-
-struct platform_device s3c_device_iis = {
-	.name		= "s3c24xx-iis",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_iis_resource),
-	.resource	= s3c_iis_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* IDE CFCON */
-
-#ifdef CONFIG_SAMSUNG_DEV_IDE
-static struct resource s3c_cfcon_resource[] = {
-	[0] = DEFINE_RES_MEM(SAMSUNG_PA_CFCON, SZ_16K),
-	[1] = DEFINE_RES_IRQ(IRQ_CFCON),
-};
-
-struct platform_device s3c_device_cfcon = {
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c_cfcon_resource),
-	.resource	= s3c_cfcon_resource,
-};
-
-void __init s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
-{
-	s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
-			 &s3c_device_cfcon);
-}
-#endif /* CONFIG_SAMSUNG_DEV_IDE */
-
 /* KEYPAD */
 
 #ifdef CONFIG_SAMSUNG_DEV_KEYPAD
@@ -614,175 +291,6 @@ void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
 }
 #endif /* CONFIG_SAMSUNG_DEV_KEYPAD */
 
-/* LCD Controller */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_lcd_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_LCD, S3C24XX_SZ_LCD),
-	[1] = DEFINE_RES_IRQ(IRQ_LCD),
-};
-
-struct platform_device s3c_device_lcd = {
-	.name		= "s3c2410-lcd",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_lcd_resource),
-	.resource	= s3c_lcd_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
-{
-	struct s3c2410fb_mach_info *npd;
-
-	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd);
-	if (npd) {
-		npd->displays = kmemdup(pd->displays,
-			sizeof(struct s3c2410fb_display) * npd->num_displays,
-			GFP_KERNEL);
-		if (!npd->displays)
-			printk(KERN_ERR "no memory for LCD display data\n");
-	} else {
-		printk(KERN_ERR "no memory for LCD platform data\n");
-	}
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* NAND */
-
-#ifdef CONFIG_S3C_DEV_NAND
-static struct resource s3c_nand_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_NAND, SZ_1M),
-};
-
-struct platform_device s3c_device_nand = {
-	.name		= "s3c2410-nand",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_nand_resource),
-	.resource	= s3c_nand_resource,
-};
-
-/*
- * s3c_nand_copy_set() - copy nand set data
- * @set: The new structure, directly copied from the old.
- *
- * Copy all the fields from the NAND set field from what is probably __initdata
- * to new kernel memory. The code returns 0 if the copy happened correctly or
- * an error code for the calling function to display.
- *
- * Note, we currently do not try and look to see if we've already copied the
- * data in a previous set.
- */
-static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
-{
-	void *ptr;
-	int size;
-
-	size = sizeof(struct mtd_partition) * set->nr_partitions;
-	if (size) {
-		ptr = kmemdup(set->partitions, size, GFP_KERNEL);
-		set->partitions = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-
-	if (set->nr_map && set->nr_chips) {
-		size = sizeof(int) * set->nr_chips;
-		ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
-		set->nr_map = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-
-	return 0;
-}
-
-void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
-{
-	struct s3c2410_platform_nand *npd;
-	int size;
-	int ret;
-
-	/* note, if we get a failure in allocation, we simply drop out of the
-	 * function. If there is so little memory available at initialisation
-	 * time then there is little chance the system is going to run.
-	 */
-
-	npd = s3c_set_platdata(nand, sizeof(*npd), &s3c_device_nand);
-	if (!npd)
-		return;
-
-	/* now see if we need to copy any of the nand set data */
-
-	size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
-	if (size) {
-		struct s3c2410_nand_set *from = npd->sets;
-		struct s3c2410_nand_set *to;
-		int i;
-
-		to = kmemdup(from, size, GFP_KERNEL);
-		npd->sets = to;	/* set, even if we failed */
-
-		if (!to) {
-			printk(KERN_ERR "%s: no memory for sets\n", __func__);
-			return;
-		}
-
-		for (i = 0; i < npd->nr_sets; i++) {
-			ret = s3c_nand_copy_set(to);
-			if (ret) {
-				printk(KERN_ERR "%s: failed to copy set %d\n",
-				__func__, i);
-				return;
-			}
-			to++;
-		}
-	}
-}
-#endif /* CONFIG_S3C_DEV_NAND */
-
-/* ONENAND */
-
-#ifdef CONFIG_S3C_DEV_ONENAND
-static struct resource s3c_onenand_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_ONENAND, SZ_1K),
-	[1] = DEFINE_RES_MEM(S3C_PA_ONENAND_BUF, S3C_SZ_ONENAND_BUF),
-	[2] = DEFINE_RES_IRQ(IRQ_ONENAND),
-};
-
-struct platform_device s3c_device_onenand = {
-	.name		= "samsung-onenand",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c_onenand_resources),
-	.resource	= s3c_onenand_resources,
-};
-#endif /* CONFIG_S3C_DEV_ONENAND */
-
-#ifdef CONFIG_S3C64XX_DEV_ONENAND1
-static struct resource s3c64xx_onenand1_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1, SZ_1K),
-	[1] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1_BUF, S3C64XX_SZ_ONENAND1_BUF),
-	[2] = DEFINE_RES_IRQ(IRQ_ONENAND1),
-};
-
-struct platform_device s3c64xx_device_onenand1 = {
-	.name		= "samsung-onenand",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c64xx_onenand1_resources),
-	.resource	= s3c64xx_onenand1_resources,
-};
-
-void __init s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
-{
-	s3c_set_platdata(pdata, sizeof(struct onenand_platform_data),
-			 &s3c64xx_device_onenand1);
-}
-#endif /* CONFIG_S3C64XX_DEV_ONENAND1 */
-
 /* PWM Timer */
 
 #ifdef CONFIG_SAMSUNG_DEV_PWM
@@ -803,162 +311,6 @@ void __init samsung_pwm_set_platdata(struct samsung_pwm_variant *pd)
 }
 #endif /* CONFIG_SAMSUNG_DEV_PWM */
 
-/* RTC */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_rtc_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_RTC, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_RTC),
-	[2] = DEFINE_RES_IRQ(IRQ_TICK),
-};
-
-struct platform_device s3c_device_rtc = {
-	.name		= "s3c2410-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_rtc_resource),
-	.resource	= s3c_rtc_resource,
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#ifdef CONFIG_S3C_DEV_RTC
-static struct resource s3c_rtc_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_RTC, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_RTC_ALARM),
-	[2] = DEFINE_RES_IRQ(IRQ_RTC_TIC),
-};
-
-struct platform_device s3c_device_rtc = {
-	.name		= "s3c64xx-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_rtc_resource),
-	.resource	= s3c_rtc_resource,
-};
-#endif /* CONFIG_S3C_DEV_RTC */
-
-/* SDI */
-
-#ifdef CONFIG_PLAT_S3C24XX
-void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd)
-{
-	switch (power_mode) {
-	case MMC_POWER_ON:
-	case MMC_POWER_UP:
-		/* Configure GPE5...GPE10 pins in SD mode */
-		s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
-				      S3C_GPIO_PULL_NONE);
-		break;
-
-	case MMC_POWER_OFF:
-	default:
-		gpio_direction_output(S3C2410_GPE(5), 0);
-		break;
-	}
-}
-
-static struct resource s3c_sdi_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_SDI, S3C24XX_SZ_SDI),
-	[1] = DEFINE_RES_IRQ(IRQ_SDI),
-};
-
-static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
-	/* This is currently here to avoid a number of if (host->pdata)
-	 * checks. Any zero fields to ensure reasonable defaults are picked. */
-	.no_wprotect = 1,
-	.no_detect = 1,
-	.set_power = s3c24xx_mci_def_set_power,
-};
-
-struct platform_device s3c_device_sdi = {
-	.name		= "s3c2410-sdi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_sdi_resource),
-	.resource	= s3c_sdi_resource,
-	.dev.platform_data = &s3cmci_def_pdata,
-};
-
-void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
-{
-	s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata),
-			 &s3c_device_sdi);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* SPI */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_spi0_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_SPI, SZ_32),
-	[1] = DEFINE_RES_IRQ(IRQ_SPI0),
-};
-
-struct platform_device s3c_device_spi0 = {
-	.name		= "s3c2410-spi",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c_spi0_resource),
-	.resource	= s3c_spi0_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-static struct resource s3c_spi1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_SPI1, SZ_32),
-	[1] = DEFINE_RES_IRQ(IRQ_SPI1),
-};
-
-struct platform_device s3c_device_spi1 = {
-	.name		= "s3c2410-spi",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c_spi1_resource),
-	.resource	= s3c_spi1_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* Touchscreen */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_ts_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
-	[1] = DEFINE_RES_IRQ(IRQ_TC),
-};
-
-struct platform_device s3c_device_ts = {
-	.name		= "s3c2410-ts",
-	.id		= -1,
-	.dev.parent	= &s3c_device_adc.dev,
-	.num_resources	= ARRAY_SIZE(s3c_ts_resource),
-	.resource	= s3c_ts_resource,
-};
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
-{
-	s3c_set_platdata(hard_s3c2410ts_info,
-			 sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#ifdef CONFIG_SAMSUNG_DEV_TS
-static struct s3c2410_ts_mach_info default_ts_data __initdata = {
-	.delay			= 10000,
-	.presc			= 49,
-	.oversampling_shift	= 2,
-};
-
-void __init s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
-{
-	if (!pd)
-		pd = &default_ts_data;
-
-	s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
-			 &s3c_device_adc);
-}
-#endif /* CONFIG_SAMSUNG_DEV_TS */
-
 /* USB */
 
 #ifdef CONFIG_S3C_DEV_USB_HOST
@@ -977,44 +329,8 @@ struct platform_device s3c_device_ohci = {
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	}
 };
-
-/*
- * s3c_ohci_set_platdata - initialise OHCI device platform data
- * @info: The platform data.
- *
- * This call copies the @info passed in and sets the device .platform_data
- * field to that copy. The @info is copied so that the original can be marked
- * __initdata.
- */
-
-void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
-{
-	s3c_set_platdata(info, sizeof(struct s3c2410_hcd_info),
-			 &s3c_device_ohci);
-}
 #endif /* CONFIG_S3C_DEV_USB_HOST */
 
-/* USB Device (Gadget) */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_usbgadget_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_USBDEV, S3C24XX_SZ_USBDEV),
-	[1] = DEFINE_RES_IRQ(IRQ_USBD),
-};
-
-struct platform_device s3c_device_usbgadget = {
-	.name		= "s3c2410-usbgadget",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_usbgadget_resource),
-	.resource	= s3c_usbgadget_resource,
-};
-
-void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
-{
-	s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
 /* USB HSOTG */
 
 #ifdef CONFIG_S3C_DEV_USB_HSOTG
@@ -1047,49 +363,6 @@ void __init dwc2_hsotg_set_platdata(struct dwc2_hsotg_plat *pd)
 }
 #endif /* CONFIG_S3C_DEV_USB_HSOTG */
 
-/* USB High Spped 2.0 Device (Gadget) */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_hsudc_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2416_PA_HSUDC, S3C2416_SZ_HSUDC),
-	[1] = DEFINE_RES_IRQ(IRQ_USBD),
-};
-
-struct platform_device s3c_device_usb_hsudc = {
-	.name		= "s3c-hsudc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_hsudc_resource),
-	.resource	= s3c_hsudc_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
-{
-	s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
-	pd->phy_init = s3c_hsudc_init_phy;
-	pd->phy_uninit = s3c_hsudc_uninit_phy;
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* WDT */
-
-#ifdef CONFIG_S3C_DEV_WDT
-static struct resource s3c_wdt_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_WDT, SZ_1K),
-	[1] = DEFINE_RES_IRQ(IRQ_WDT),
-};
-
-struct platform_device s3c_device_wdt = {
-	.name		= "s3c2410-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_wdt_resource),
-	.resource	= s3c_wdt_resource,
-};
-#endif /* CONFIG_S3C_DEV_WDT */
-
 #ifdef CONFIG_S3C64XX_DEV_SPI0
 static struct resource s3c64xx_spi0_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256),
diff --git a/arch/arm/mach-s3c/devs.h b/arch/arm/mach-s3c/devs.h
index 02b0c5750572..21c00786c264 100644
--- a/arch/arm/mach-s3c/devs.h
+++ b/arch/arm/mach-s3c/devs.h
@@ -25,62 +25,23 @@ extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
 extern struct platform_device *s3c24xx_uart_devs[];
 extern struct platform_device *s3c24xx_uart_src[];
 
-extern struct platform_device s3c64xx_device_ac97;
 extern struct platform_device s3c64xx_device_iis0;
 extern struct platform_device s3c64xx_device_iis1;
-extern struct platform_device s3c64xx_device_iisv4;
-extern struct platform_device s3c64xx_device_onenand1;
-extern struct platform_device s3c64xx_device_pcm0;
-extern struct platform_device s3c64xx_device_pcm1;
 extern struct platform_device s3c64xx_device_spi0;
-extern struct platform_device s3c64xx_device_spi1;
-extern struct platform_device s3c64xx_device_spi2;
 
-extern struct platform_device s3c_device_adc;
-extern struct platform_device s3c_device_cfcon;
 extern struct platform_device s3c_device_fb;
-extern struct platform_device s3c_device_hwmon;
 extern struct platform_device s3c_device_hsmmc0;
 extern struct platform_device s3c_device_hsmmc1;
 extern struct platform_device s3c_device_hsmmc2;
 extern struct platform_device s3c_device_hsmmc3;
 extern struct platform_device s3c_device_i2c0;
 extern struct platform_device s3c_device_i2c1;
-extern struct platform_device s3c_device_i2c2;
-extern struct platform_device s3c_device_i2c3;
-extern struct platform_device s3c_device_i2c4;
-extern struct platform_device s3c_device_i2c5;
-extern struct platform_device s3c_device_i2c6;
-extern struct platform_device s3c_device_i2c7;
-extern struct platform_device s3c_device_iis;
-extern struct platform_device s3c_device_lcd;
-extern struct platform_device s3c_device_nand;
 extern struct platform_device s3c_device_ohci;
-extern struct platform_device s3c_device_onenand;
-extern struct platform_device s3c_device_rtc;
-extern struct platform_device s3c_device_sdi;
-extern struct platform_device s3c_device_spi0;
-extern struct platform_device s3c_device_spi1;
-extern struct platform_device s3c_device_ts;
-extern struct platform_device s3c_device_timer[];
-extern struct platform_device s3c_device_usbgadget;
 extern struct platform_device s3c_device_usb_hsotg;
-extern struct platform_device s3c_device_usb_hsudc;
-extern struct platform_device s3c_device_wdt;
 
-extern struct platform_device samsung_asoc_idma;
 extern struct platform_device samsung_device_keypad;
 extern struct platform_device samsung_device_pwm;
 
-/* s3c2440 specific devices */
-
-#ifdef CONFIG_CPU_S3C2440
-
-extern struct platform_device s3c_device_camif;
-extern struct platform_device s3c_device_ac97;
-
-#endif
-
 /**
  * s3c_set_platdata() - helper for setting platform data
  * @pd: The default platform data for this device.
diff --git a/arch/arm/mach-s3c/dma-s3c24xx.h b/arch/arm/mach-s3c/dma-s3c24xx.h
deleted file mode 100644
index 25fc9c258fc1..000000000000
--- a/arch/arm/mach-s3c/dma-s3c24xx.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2003-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#include <linux/device.h>
-
-/* We use `virtual` dma channels to hide the fact we have only a limited
- * number of DMA channels, and not of all of them (dependent on the device)
- * can be attached to any DMA source. We therefore let the DMA core handle
- * the allocation of hardware channels to clients.
-*/
-
-enum dma_ch {
-	DMACH_XD0 = 0,
-	DMACH_XD1,
-	DMACH_SDI,
-	DMACH_SPI0,
-	DMACH_SPI1,
-	DMACH_UART0,
-	DMACH_UART1,
-	DMACH_UART2,
-	DMACH_TIMER,
-	DMACH_I2S_IN,
-	DMACH_I2S_OUT,
-	DMACH_PCM_IN,
-	DMACH_PCM_OUT,
-	DMACH_MIC_IN,
-	DMACH_USB_EP1,
-	DMACH_USB_EP2,
-	DMACH_USB_EP3,
-	DMACH_USB_EP4,
-	DMACH_UART0_SRC2,	/* s3c2412 second uart sources */
-	DMACH_UART1_SRC2,
-	DMACH_UART2_SRC2,
-	DMACH_UART3,		/* s3c2443 has extra uart */
-	DMACH_UART3_SRC2,
-	DMACH_SPI0_TX,		/* s3c2443/2416/2450 hsspi0 */
-	DMACH_SPI0_RX,		/* s3c2443/2416/2450 hsspi0 */
-	DMACH_SPI1_TX,		/* s3c2443/2450 hsspi1 */
-	DMACH_SPI1_RX,		/* s3c2443/2450 hsspi1 */
-	DMACH_MAX,		/* the end entry */
-};
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c/dma-s3c64xx.h b/arch/arm/mach-s3c/dma-s3c64xx.h
deleted file mode 100644
index 40ca8de21096..000000000000
--- a/arch/arm/mach-s3c/dma-s3c64xx.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - DMA support
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#define S3C64XX_DMA_CHAN(name)		((unsigned long)(name))
-
-/* DMA0/SDMA0 */
-#define DMACH_UART0		"uart0_tx"
-#define DMACH_UART0_SRC2	"uart0_rx"
-#define DMACH_UART1		"uart1_tx"
-#define DMACH_UART1_SRC2	"uart1_rx"
-#define DMACH_UART2		"uart2_tx"
-#define DMACH_UART2_SRC2	"uart2_rx"
-#define DMACH_UART3		"uart3_tx"
-#define DMACH_UART3_SRC2	"uart3_rx"
-#define DMACH_PCM0_TX		"pcm0_tx"
-#define DMACH_PCM0_RX		"pcm0_rx"
-#define DMACH_I2S0_OUT		"i2s0_tx"
-#define DMACH_I2S0_IN		"i2s0_rx"
-#define DMACH_SPI0_TX		S3C64XX_DMA_CHAN("spi0_tx")
-#define DMACH_SPI0_RX		S3C64XX_DMA_CHAN("spi0_rx")
-#define DMACH_HSI_I2SV40_TX	"i2s2_tx"
-#define DMACH_HSI_I2SV40_RX	"i2s2_rx"
-
-/* DMA1/SDMA1 */
-#define DMACH_PCM1_TX		"pcm1_tx"
-#define DMACH_PCM1_RX		"pcm1_rx"
-#define DMACH_I2S1_OUT		"i2s1_tx"
-#define DMACH_I2S1_IN		"i2s1_rx"
-#define DMACH_SPI1_TX		S3C64XX_DMA_CHAN("spi1_tx")
-#define DMACH_SPI1_RX		S3C64XX_DMA_CHAN("spi1_rx")
-#define DMACH_AC97_PCMOUT	"ac97_out"
-#define DMACH_AC97_PCMIN	"ac97_in"
-#define DMACH_AC97_MICIN	"ac97_mic"
-#define DMACH_PWM		"pwm"
-#define DMACH_IRDA		"irda"
-#define DMACH_EXTERNAL		"external"
-#define DMACH_SECURITY_RX	"sec_rx"
-#define DMACH_SECURITY_TX	"sec_tx"
-
-enum dma_ch {
-	DMACH_MAX = 32
-};
-
-#include <linux/amba/pl08x.h>
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c/dma.h b/arch/arm/mach-s3c/dma.h
deleted file mode 100644
index 59a4578c5f00..000000000000
--- a/arch/arm/mach-s3c/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "dma-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
-#include "dma-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/fb-core-s3c24xx.h b/arch/arm/mach-s3c/fb-core-s3c24xx.h
deleted file mode 100644
index 0e07f3ba4aef..000000000000
--- a/arch/arm/mach-s3c/fb-core-s3c24xx.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2010 Samsung Electronics Co., Ltd.
- *	Pawel Osciak <p.osciak@samsung.com>
- *
- * Samsung framebuffer driver core functions
- */
-#ifndef __ASM_PLAT_FB_CORE_S3C24XX_H
-#define __ASM_PLAT_FB_CORE_S3C24XX_H __FILE__
-
-/*
- * These functions are only for use with the core support code, such as
- * the CPU-specific initialization code.
- */
-
-/* Re-define device name depending on support. */
-static inline void s3c_fb_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_FB
-	s3c_device_fb.name = name;
-#endif
-}
-
-#endif /* __ASM_PLAT_FB_CORE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c/gpio-cfg-helpers.h b/arch/arm/mach-s3c/gpio-cfg-helpers.h
index db0c56f5ca15..9d6f6319ae3e 100644
--- a/arch/arm/mach-s3c/gpio-cfg-helpers.h
+++ b/arch/arm/mach-s3c/gpio-cfg-helpers.h
@@ -26,134 +26,10 @@ static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip,
 	return (chip->config->set_config)(chip, off, config);
 }
 
-static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip,
-					      unsigned int off)
-{
-	return (chip->config->get_config)(chip, off);
-}
-
 static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip,
 					  unsigned int off, samsung_gpio_pull_t pull)
 {
 	return (chip->config->set_pull)(chip, off, pull);
 }
 
-static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip,
-							  unsigned int off)
-{
-	return chip->config->get_pull(chip, off);
-}
-
-/* Pull-{up,down} resistor controls.
- *
- * S3C2410,S3C2440 = Pull-UP,
- * S3C2412,S3C2413 = Pull-Down
- * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
- * S3C2443 = Pull-Both [not same as S3C6400]
- */
-
-/**
- * s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with one
- * bit configuring the presence of a pull-up resistor.
- */
-extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
-				    unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none
- * @chip: The gpio chip that is being configured
- * @off: The offset for the GPIO being configured
- * @param: pull: The pull mode being requested
- *
- * This is a helper function for the case where we have GPIOs with one
- * bit configuring the presence of a pull-down resistor.
- */
-extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
-				      unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * samsung_gpio_setpull_upown() - Pull configuration for choice of up,
- * down or none
- *
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with two
- * bits configuring the presence of a pull resistor, in the following
- * order:
- *	00 = No pull resistor connected
- *	01 = Pull-up resistor connected
- *	10 = Pull-down resistor connected
- */
-extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
-				       unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * samsung_gpio_getpull_updown() - Get configuration for choice of up,
- * down or none
- *
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-{up,down} resistor
- * for the given GPIO in the same case as samsung_gpio_setpull_upown.
-*/
-extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
-						       unsigned int off);
-
-/**
- * s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-up resistor for the
- * given GPIO in the same case as s3c24xx_gpio_setpull_1up.
-*/
-extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
-						    unsigned int off);
-
-/**
- * s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-down resistor for the
- * given GPIO in the same case as s3c24xx_gpio_setpull_1down.
-*/
-extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
-						      unsigned int off);
-
-/**
- * s3c2443_gpio_setpull() - Pull configuration for s3c2443.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with two
- * bits configuring the presence of a pull resistor, in the following
- * order:
- *	00 = Pull-up resistor connected
- *	10 = Pull-down resistor connected
- *	x1 = No pull up resistor
- */
-extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
-				unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors
- * @chip: The gpio chip that the GPIO pin belongs to.
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as samsung_gpio_setpull_upown.
-*/
-extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
-						unsigned int off);
-
 #endif /* __PLAT_GPIO_CFG_HELPERS_H */
diff --git a/arch/arm/mach-s3c/gpio-cfg.h b/arch/arm/mach-s3c/gpio-cfg.h
index 469c220e092b..2dfb0561001e 100644
--- a/arch/arm/mach-s3c/gpio-cfg.h
+++ b/arch/arm/mach-s3c/gpio-cfg.h
@@ -95,17 +95,6 @@ struct samsung_gpio_cfg {
 extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
 
 /**
- * s3c_gpio_getcfg - Read the current function for a GPIO pin
- * @pin: The pin to read the configuration value for.
- *
- * Read the configuration state of the given @pin, returning a value that
- * could be passed back to s3c_gpio_cfgpin().
- *
- * @sa s3c_gpio_cfgpin
- */
-extern unsigned s3c_gpio_getcfg(unsigned int pin);
-
-/**
  * s3c_gpio_cfgpin_range() - Change the GPIO function for configuring pin range
  * @start: The pin number to start at
  * @nr: The number of pins to configure from @start.
@@ -142,14 +131,6 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
 */
 extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull);
 
-/**
- * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
- * @pin: The pin number to get the settings for
- *
- * Read the pull resistor value for the specified pin.
-*/
-extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
-
 /* configure `all` aspects of an gpio */
 
 /**
diff --git a/arch/arm/mach-s3c/gpio-core.h b/arch/arm/mach-s3c/gpio-core.h
index b361c8c0d669..6801c85fb9da 100644
--- a/arch/arm/mach-s3c/gpio-core.h
+++ b/arch/arm/mach-s3c/gpio-core.h
@@ -93,9 +93,6 @@ static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc)
  */
 extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
 
-/* exported for core SoC support to change */
-extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default;
-
 #ifdef CONFIG_S3C_GPIO_TRACK
 extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
 
diff --git a/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h b/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h
deleted file mode 100644
index c29fdc95f883..000000000000
--- a/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - GPIO lib support
- */
-
-/* some boards require extra gpio capacity to support external
- * devices that need GPIO.
- */
-
-#ifndef GPIO_SAMSUNG_S3C24XX_H
-#define GPIO_SAMSUNG_S3C24XX_H
-
-#include "map.h"
-
-/*
- * GPIO sizes for various SoCs:
- *
- *   2410 2412 2440 2443 2416
- *             2442
- *   ---- ---- ---- ---- ----
- * A  23   22   25   16   27
- * B  11   11   11   11   11
- * C  16   16   16   16   16
- * D  16   16   16   16   16
- * E  16   16   16   16   16
- * F  8    8    8    8    8
- * G  16   16   16   16   8
- * H  11   11   11   15   15
- * J  --   --   13   16   --
- * K  --   --   --   --   16
- * L  --   --   --   15   14
- * M  --   --   --   2    2
- */
-
-/* GPIO bank sizes */
-
-#define S3C2410_GPIO_A_NR	(32)
-#define S3C2410_GPIO_B_NR	(32)
-#define S3C2410_GPIO_C_NR	(32)
-#define S3C2410_GPIO_D_NR	(32)
-#define S3C2410_GPIO_E_NR	(32)
-#define S3C2410_GPIO_F_NR	(32)
-#define S3C2410_GPIO_G_NR	(32)
-#define S3C2410_GPIO_H_NR	(32)
-#define S3C2410_GPIO_J_NR	(32)	/* technically 16. */
-#define S3C2410_GPIO_K_NR	(32)	/* technically 16. */
-#define S3C2410_GPIO_L_NR	(32)	/* technically 15. */
-#define S3C2410_GPIO_M_NR	(32)	/* technically 2. */
-
-#if CONFIG_S3C_GPIO_SPACE != 0
-#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
-#endif
-
-#define S3C2410_GPIO_NEXT(__gpio) \
-	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
-
-#ifndef __ASSEMBLY__
-
-enum s3c_gpio_number {
-	S3C2410_GPIO_A_START = 0,
-	S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
-	S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
-	S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
-	S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
-	S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
-	S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
-	S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
-	S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
-	S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
-	S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
-	S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
-};
-
-#endif /* __ASSEMBLY__ */
-
-/* S3C2410 GPIO number definitions. */
-
-#define S3C2410_GPA(_nr)	(S3C2410_GPIO_A_START + (_nr))
-#define S3C2410_GPB(_nr)	(S3C2410_GPIO_B_START + (_nr))
-#define S3C2410_GPC(_nr)	(S3C2410_GPIO_C_START + (_nr))
-#define S3C2410_GPD(_nr)	(S3C2410_GPIO_D_START + (_nr))
-#define S3C2410_GPE(_nr)	(S3C2410_GPIO_E_START + (_nr))
-#define S3C2410_GPF(_nr)	(S3C2410_GPIO_F_START + (_nr))
-#define S3C2410_GPG(_nr)	(S3C2410_GPIO_G_START + (_nr))
-#define S3C2410_GPH(_nr)	(S3C2410_GPIO_H_START + (_nr))
-#define S3C2410_GPJ(_nr)	(S3C2410_GPIO_J_START + (_nr))
-#define S3C2410_GPK(_nr)	(S3C2410_GPIO_K_START + (_nr))
-#define S3C2410_GPL(_nr)	(S3C2410_GPIO_L_START + (_nr))
-#define S3C2410_GPM(_nr)	(S3C2410_GPIO_M_START + (_nr))
-
-#ifdef CONFIG_CPU_S3C244X
-#define S3C_GPIO_END	(S3C2410_GPJ(0) + 32)
-#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
-#define S3C_GPIO_END	(S3C2410_GPM(0) + 32)
-#else
-#define S3C_GPIO_END	(S3C2410_GPH(0) + 32)
-#endif
-
-#endif /* GPIO_SAMSUNG_S3C24XX_H */
diff --git a/arch/arm/mach-s3c/gpio-samsung.c b/arch/arm/mach-s3c/gpio-samsung.c
index b7fc7c41309c..81e198e5a6d3 100644
--- a/arch/arm/mach-s3c/gpio-samsung.c
+++ b/arch/arm/mach-s3c/gpio-samsung.c
@@ -11,9 +11,9 @@
 // Samsung - GPIOlib support
 
 #include <linux/kernel.h>
+#include <linux/gpio/driver.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/module.h>
@@ -35,10 +35,9 @@
 #include "gpio-core.h"
 #include "gpio-cfg.h"
 #include "gpio-cfg-helpers.h"
-#include "hardware-s3c24xx.h"
 #include "pm.h"
 
-int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+static int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
 				unsigned int off, samsung_gpio_pull_t pull)
 {
 	void __iomem *reg = chip->base + 0x08;
@@ -53,7 +52,7 @@ int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
 	return 0;
 }
 
-samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+static samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
 						unsigned int off)
 {
 	void __iomem *reg = chip->base + 0x08;
@@ -66,113 +65,6 @@ samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
 	return (__force samsung_gpio_pull_t)pup;
 }
 
-int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
-			 unsigned int off, samsung_gpio_pull_t pull)
-{
-	switch (pull) {
-	case S3C_GPIO_PULL_NONE:
-		pull = 0x01;
-		break;
-	case S3C_GPIO_PULL_UP:
-		pull = 0x00;
-		break;
-	case S3C_GPIO_PULL_DOWN:
-		pull = 0x02;
-		break;
-	}
-	return samsung_gpio_setpull_updown(chip, off, pull);
-}
-
-samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
-					 unsigned int off)
-{
-	samsung_gpio_pull_t pull;
-
-	pull = samsung_gpio_getpull_updown(chip, off);
-
-	switch (pull) {
-	case 0x00:
-		pull = S3C_GPIO_PULL_UP;
-		break;
-	case 0x01:
-	case 0x03:
-		pull = S3C_GPIO_PULL_NONE;
-		break;
-	case 0x02:
-		pull = S3C_GPIO_PULL_DOWN;
-		break;
-	}
-
-	return pull;
-}
-
-static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip,
-				  unsigned int off, samsung_gpio_pull_t pull,
-				  samsung_gpio_pull_t updown)
-{
-	void __iomem *reg = chip->base + 0x08;
-	u32 pup = __raw_readl(reg);
-
-	if (pull == updown)
-		pup &= ~(1 << off);
-	else if (pull == S3C_GPIO_PULL_NONE)
-		pup |= (1 << off);
-	else
-		return -EINVAL;
-
-	__raw_writel(pup, reg);
-	return 0;
-}
-
-static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip,
-						  unsigned int off,
-						  samsung_gpio_pull_t updown)
-{
-	void __iomem *reg = chip->base + 0x08;
-	u32 pup = __raw_readl(reg);
-
-	pup &= (1 << off);
-	return pup ? S3C_GPIO_PULL_NONE : updown;
-}
-
-samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
-					     unsigned int off)
-{
-	return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
-}
-
-int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
-			     unsigned int off, samsung_gpio_pull_t pull)
-{
-	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
-}
-
-samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
-					       unsigned int off)
-{
-	return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
-}
-
-int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
-			       unsigned int off, samsung_gpio_pull_t pull)
-{
-	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
-}
-
-/*
- * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has two bits of configuration per gpio, which have the following
- * functions:
- *	00 = input
- *	01 = output
- *	1x = special function
- */
-
 static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip,
 				    unsigned int off, unsigned int cfg)
 {
@@ -289,70 +181,6 @@ static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip,
 	return S3C_GPIO_SPECIAL(con);
 }
 
-#ifdef CONFIG_PLAT_S3C24XX
-/*
- * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has one bit of configuration for the gpio, where setting the bit
- * means the pin is in special function mode and unset means output.
- */
-
-static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip,
-				     unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = off;
-	u32 con;
-
-	if (samsung_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-
-		/* Map output to 0, and SFN2 to 1 */
-		cfg -= 1;
-		if (cfg > 1)
-			return -EINVAL;
-
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0x1 << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-/*
- * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable
- * GPIO configuration value.
- *
- * @sa samsung_gpio_getcfg_2bit
- * @sa samsung_gpio_getcfg_4bit
- */
-
-static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip,
-					  unsigned int off)
-{
-	u32 con;
-
-	con = __raw_readl(chip->base);
-	con >>= off;
-	con &= 1;
-	con++;
-
-	return S3C_GPIO_SFN(con);
-}
-#endif
-
 static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
 					   int nr_chips)
 {
@@ -368,18 +196,6 @@ static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
 	}
 }
 
-struct samsung_gpio_cfg s3c24xx_gpiocfg_default = {
-	.set_config	= samsung_gpio_setcfg_2bit,
-	.get_config	= samsung_gpio_getcfg_2bit,
-};
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = {
-	.set_config	= s3c24xx_gpio_setcfg_abank,
-	.get_config	= s3c24xx_gpio_getcfg_abank,
-};
-#endif
-
 static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
 	[0] = {
 		.cfg_eint	= 0x0,
@@ -614,46 +430,8 @@ static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
 	return 0;
 }
 
-#ifdef CONFIG_PLAT_S3C24XX
-/* The next set of routines are for the case of s3c24xx bank a */
-
-static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
-{
-	return -EINVAL;
-}
-
-static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-	unsigned long con;
-
-	local_irq_save(flags);
-
-	con = __raw_readl(base + 0x00);
-	dat = __raw_readl(base + 0x04);
-
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-
-	__raw_writel(dat, base + 0x04);
-
-	con &= ~(1 << offset);
-
-	__raw_writel(con, base + 0x00);
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
-	return 0;
-}
-#endif
-
-static void samsung_gpiolib_set(struct gpio_chip *chip,
-				unsigned offset, int value)
+static int samsung_gpiolib_set(struct gpio_chip *chip, unsigned int offset,
+			       int value)
 {
 	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
 	void __iomem *base = ourchip->base;
@@ -669,6 +447,8 @@ static void samsung_gpiolib_set(struct gpio_chip *chip,
 	__raw_writel(dat, base + 0x04);
 
 	samsung_gpio_unlock(ourchip, flags);
+
+	return 0;
 }
 
 static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset)
@@ -756,33 +536,6 @@ static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
 		s3c_gpiolib_track(chip);
 }
 
-static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
-					     int nr_chips, void __iomem *base)
-{
-	int i;
-	struct gpio_chip *gc = &chip->chip;
-
-	for (i = 0 ; i < nr_chips; i++, chip++) {
-		/* skip banks not present on SoC */
-		if (chip->chip.base >= S3C_GPIO_END)
-			continue;
-
-		if (!chip->config)
-			chip->config = &s3c24xx_gpiocfg_default;
-		if (!chip->pm)
-			chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
-		if ((base != NULL) && (chip->base == NULL))
-			chip->base = base + ((i) * 0x10);
-
-		if (!gc->direction_input)
-			gc->direction_input = samsung_gpiolib_2bit_input;
-		if (!gc->direction_output)
-			gc->direction_output = samsung_gpiolib_2bit_output;
-
-		samsung_gpiolib_add(chip);
-	}
-}
-
 static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip,
 						  int nr_chips, void __iomem *base,
 						  unsigned int offset)
@@ -865,24 +618,6 @@ int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
 	return samsung_chip->irq_base + offset;
 }
 
-#ifdef CONFIG_PLAT_S3C24XX
-static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	if (offset < 4) {
-		if (soc_is_s3c2412())
-			return IRQ_EINT0_2412 + offset;
-		else
-			return IRQ_EINT0 + offset;
-	}
-
-	if (offset < 8)
-		return IRQ_EINT4 + offset - 4;
-
-	return -EINVAL;
-}
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
 static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
 {
 	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
@@ -892,109 +627,6 @@ static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin)
 {
 	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
 }
-#endif
-
-struct samsung_gpio_chip s3c24xx_gpios[] = {
-#ifdef CONFIG_PLAT_S3C24XX
-	{
-		.config	= &s3c24xx_gpiocfg_banka,
-		.chip	= {
-			.base			= S3C2410_GPA(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOA",
-			.ngpio			= 27,
-			.direction_input	= s3c24xx_gpiolib_banka_input,
-			.direction_output	= s3c24xx_gpiolib_banka_output,
-		},
-	}, {
-		.chip	= {
-			.base	= S3C2410_GPB(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOB",
-			.ngpio	= 11,
-		},
-	}, {
-		.chip	= {
-			.base	= S3C2410_GPC(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOC",
-			.ngpio	= 16,
-		},
-	}, {
-		.chip	= {
-			.base	= S3C2410_GPD(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOD",
-			.ngpio	= 16,
-		},
-	}, {
-		.chip	= {
-			.base	= S3C2410_GPE(0),
-			.label	= "GPIOE",
-			.owner	= THIS_MODULE,
-			.ngpio	= 16,
-		},
-	}, {
-		.chip	= {
-			.base	= S3C2410_GPF(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOF",
-			.ngpio	= 8,
-			.to_irq	= s3c24xx_gpiolib_fbank_to_irq,
-		},
-	}, {
-		.irq_base = IRQ_EINT8,
-		.chip	= {
-			.base	= S3C2410_GPG(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOG",
-			.ngpio	= 16,
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.chip	= {
-			.base	= S3C2410_GPH(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOH",
-			.ngpio	= 15,
-		},
-	},
-		/* GPIOS for the S3C2443 and later devices. */
-	{
-		.base	= S3C2440_GPJCON,
-		.chip	= {
-			.base	= S3C2410_GPJ(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOJ",
-			.ngpio	= 16,
-		},
-	}, {
-		.base	= S3C2443_GPKCON,
-		.chip	= {
-			.base	= S3C2410_GPK(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOK",
-			.ngpio	= 16,
-		},
-	}, {
-		.base	= S3C2443_GPLCON,
-		.chip	= {
-			.base	= S3C2410_GPL(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOL",
-			.ngpio	= 15,
-		},
-	}, {
-		.base	= S3C2443_GPMCON,
-		.chip	= {
-			.base	= S3C2410_GPM(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOM",
-			.ngpio	= 2,
-		},
-	},
-#endif
-};
 
 /*
  * GPIO bank summary:
@@ -1023,7 +655,6 @@ struct samsung_gpio_chip s3c24xx_gpios[] = {
  */
 
 static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
-#ifdef CONFIG_ARCH_S3C64XX
 	{
 		.chip	= {
 			.base	= S3C64XX_GPA(0),
@@ -1072,11 +703,9 @@ static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
 			.to_irq = s3c64xx_gpiolib_mbank_to_irq,
 		},
 	},
-#endif
 };
 
 static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
-#ifdef CONFIG_ARCH_S3C64XX
 	{
 		.base	= S3C64XX_GPH_BASE + 0x4,
 		.chip	= {
@@ -1102,11 +731,9 @@ static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
 			.to_irq = s3c64xx_gpiolib_lbank_to_irq,
 		},
 	},
-#endif
 };
 
 static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
-#ifdef CONFIG_ARCH_S3C64XX
 	{
 		.base	= S3C64XX_GPF_BASE,
 		.config	= &samsung_gpio_cfgs[6],
@@ -1161,7 +788,6 @@ static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
 			.to_irq = samsung_gpiolib_to_irq,
 		},
 	},
-#endif
 };
 
 /* TODO: cleanup soc_is_* */
@@ -1176,12 +802,7 @@ static __init int samsung_gpiolib_init(void)
 	if (of_have_populated_dt())
 		return 0;
 
-	if (soc_is_s3c24xx()) {
-		samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
-				ARRAY_SIZE(samsung_gpio_cfgs));
-		s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
-				ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
-	} else if (soc_is_s3c64xx()) {
+	if (soc_is_s3c64xx()) {
 		samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
 				ARRAY_SIZE(samsung_gpio_cfgs));
 		samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
@@ -1249,25 +870,6 @@ int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
 }
 EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
 
-unsigned s3c_gpio_getcfg(unsigned int pin)
-{
-	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
-	unsigned long flags;
-	unsigned ret = 0;
-	int offset;
-
-	if (chip) {
-		offset = pin - chip->chip.base;
-
-		samsung_gpio_lock(chip, flags);
-		ret = samsung_gpio_do_getcfg(chip, offset);
-		samsung_gpio_unlock(chip, flags);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_getcfg);
-
 int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull)
 {
 	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
@@ -1286,40 +888,3 @@ int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull)
 	return ret;
 }
 EXPORT_SYMBOL(s3c_gpio_setpull);
-
-samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
-{
-	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset;
-	u32 pup = 0;
-
-	if (chip) {
-		offset = pin - chip->chip.base;
-
-		samsung_gpio_lock(chip, flags);
-		pup = samsung_gpio_do_getpull(chip, offset);
-		samsung_gpio_unlock(chip, flags);
-	}
-
-	return (__force samsung_gpio_pull_t)pup;
-}
-EXPORT_SYMBOL(s3c_gpio_getpull);
-
-#ifdef CONFIG_PLAT_S3C24XX
-unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
-{
-	unsigned long flags;
-	unsigned long misccr;
-
-	local_irq_save(flags);
-	misccr = __raw_readl(S3C24XX_MISCCR);
-	misccr &= ~clear;
-	misccr ^= change;
-	__raw_writel(misccr, S3C24XX_MISCCR);
-	local_irq_restore(flags);
-
-	return misccr;
-}
-EXPORT_SYMBOL(s3c2410_modify_misccr);
-#endif
diff --git a/arch/arm/mach-s3c/gpio-samsung.h b/arch/arm/mach-s3c/gpio-samsung.h
index 02f6f4a96862..4233515eddaa 100644
--- a/arch/arm/mach-s3c/gpio-samsung.h
+++ b/arch/arm/mach-s3c/gpio-samsung.h
@@ -1,9 +1,2 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "gpio-samsung-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
 #include "gpio-samsung-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/gta02.h b/arch/arm/mach-s3c/gta02.h
deleted file mode 100644
index 043ae382bfc5..000000000000
--- a/arch/arm/mach-s3c/gta02.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * GTA02 header
- */
-
-#ifndef __MACH_S3C24XX_GTA02_H
-#define __MACH_S3C24XX_GTA02_H __FILE__
-
-#include "regs-gpio.h"
-
-#define GTA02_GPIO_AUX_LED	S3C2410_GPB(2)
-#define GTA02_GPIO_USB_PULLUP	S3C2410_GPB(9)
-#define GTA02_GPIO_AUX_KEY	S3C2410_GPF(6)
-#define GTA02_GPIO_HOLD_KEY	S3C2410_GPF(7)
-#define GTA02_GPIO_AMP_SHUT	S3C2410_GPJ(1)	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_HP_IN	S3C2410_GPJ(2)	/* v2 + v3 + v4 only */
-
-#define GTA02_IRQ_PCF50633	IRQ_EINT9
-
-#endif /* __MACH_S3C24XX_GTA02_H */
diff --git a/arch/arm/mach-s3c/h1940-bluetooth.c b/arch/arm/mach-s3c/h1940-bluetooth.c
deleted file mode 100644
index 59edcf8a620d..000000000000
--- a/arch/arm/mach-s3c/h1940-bluetooth.c
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: GPL-1.0+
-//
-// Copyright (c) Arnaud Patard <arnaud.patard@rtp-net.org>
-//
-//	    S3C2410 bluetooth "driver"
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/rfkill.h>
-
-#include "gpio-cfg.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "h1940.h"
-
-#define DRV_NAME "h1940-bt"
-
-/* Bluetooth control */
-static void h1940bt_enable(int on)
-{
-	if (on) {
-		/* Power on the chip */
-		gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 1);
-		/* Reset the chip */
-		mdelay(10);
-
-		gpio_set_value(S3C2410_GPH(1), 1);
-		mdelay(10);
-		gpio_set_value(S3C2410_GPH(1), 0);
-
-		h1940_led_blink_set(NULL, GPIO_LED_BLINK, NULL, NULL);
-	}
-	else {
-		gpio_set_value(S3C2410_GPH(1), 1);
-		mdelay(10);
-		gpio_set_value(S3C2410_GPH(1), 0);
-		mdelay(10);
-		gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0);
-
-		h1940_led_blink_set(NULL, GPIO_LED_NO_BLINK_LOW, NULL, NULL);
-	}
-}
-
-static int h1940bt_set_block(void *data, bool blocked)
-{
-	h1940bt_enable(!blocked);
-	return 0;
-}
-
-static const struct rfkill_ops h1940bt_rfkill_ops = {
-	.set_block = h1940bt_set_block,
-};
-
-static int h1940bt_probe(struct platform_device *pdev)
-{
-	struct rfkill *rfk;
-	int ret = 0;
-
-	ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev));
-	if (ret) {
-		dev_err(&pdev->dev, "could not get GPH1\n");
-		return ret;
-	}
-
-	ret = gpio_request(H1940_LATCH_BLUETOOTH_POWER, dev_name(&pdev->dev));
-	if (ret) {
-		gpio_free(S3C2410_GPH(1));
-		dev_err(&pdev->dev, "could not get BT_POWER\n");
-		return ret;
-	}
-
-	/* Configures BT serial port GPIOs */
-	s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
-	s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
-	s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
-	s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
-	s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
-	s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
-	s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
-	s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
-
-	rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
-			&h1940bt_rfkill_ops, NULL);
-	if (!rfk) {
-		ret = -ENOMEM;
-		goto err_rfk_alloc;
-	}
-
-	ret = rfkill_register(rfk);
-	if (ret)
-		goto err_rfkill;
-
-	platform_set_drvdata(pdev, rfk);
-
-	return 0;
-
-err_rfkill:
-	rfkill_destroy(rfk);
-err_rfk_alloc:
-	return ret;
-}
-
-static int h1940bt_remove(struct platform_device *pdev)
-{
-	struct rfkill *rfk = platform_get_drvdata(pdev);
-
-	platform_set_drvdata(pdev, NULL);
-	gpio_free(S3C2410_GPH(1));
-
-	if (rfk) {
-		rfkill_unregister(rfk);
-		rfkill_destroy(rfk);
-	}
-	rfk = NULL;
-
-	h1940bt_enable(0);
-
-	return 0;
-}
-
-
-static struct platform_driver h1940bt_driver = {
-	.driver		= {
-		.name	= DRV_NAME,
-	},
-	.probe		= h1940bt_probe,
-	.remove		= h1940bt_remove,
-};
-
-module_platform_driver(h1940bt_driver);
-
-MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
-MODULE_DESCRIPTION("Driver for the iPAQ H1940 bluetooth chip");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-s3c/h1940.h b/arch/arm/mach-s3c/h1940.h
deleted file mode 100644
index 5dfe9d10cd15..000000000000
--- a/arch/arm/mach-s3c/h1940.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * iPAQ H1940 series definitions
- */
-
-#ifndef __MACH_S3C24XX_H1940_H
-#define __MACH_S3C24XX_H1940_H __FILE__
-
-#define H1940_SUSPEND_CHECKSUM		(0x30003ff8)
-#define H1940_SUSPEND_RESUMEAT		(0x30081000)
-#define H1940_SUSPEND_CHECK		(0x30080000)
-
-struct gpio_desc;
-
-extern void h1940_pm_return(void);
-extern int h1940_led_blink_set(struct gpio_desc *desc, int state,
-			       unsigned long *delay_on,
-			       unsigned long *delay_off);
-
-#include <linux/gpio.h>
-
-#define H1940_LATCH_GPIO(x)		(S3C_GPIO_END + (x))
-
-/* SD layer latch */
-
-#define H1940_LATCH_LCD_P0		H1940_LATCH_GPIO(0)
-#define H1940_LATCH_LCD_P1		H1940_LATCH_GPIO(1)
-#define H1940_LATCH_LCD_P2		H1940_LATCH_GPIO(2)
-#define H1940_LATCH_LCD_P3		H1940_LATCH_GPIO(3)
-#define H1940_LATCH_MAX1698_nSHUTDOWN	H1940_LATCH_GPIO(4)
-#define H1940_LATCH_LED_RED		H1940_LATCH_GPIO(5)
-#define H1940_LATCH_SDQ7		H1940_LATCH_GPIO(6)
-#define H1940_LATCH_USB_DP		H1940_LATCH_GPIO(7)
-
-/* CPU layer latch */
-
-#define H1940_LATCH_UDA_POWER		H1940_LATCH_GPIO(8)
-#define H1940_LATCH_AUDIO_POWER		H1940_LATCH_GPIO(9)
-#define H1940_LATCH_SM803_ENABLE	H1940_LATCH_GPIO(10)
-#define H1940_LATCH_LCD_P4		H1940_LATCH_GPIO(11)
-#define H1940_LATCH_SD_POWER		H1940_LATCH_GPIO(12)
-#define H1940_LATCH_BLUETOOTH_POWER	H1940_LATCH_GPIO(13)
-#define H1940_LATCH_LED_GREEN		H1940_LATCH_GPIO(14)
-#define H1940_LATCH_LED_FLASH		H1940_LATCH_GPIO(15)
-
-#endif /* __MACH_S3C24XX_H1940_H */
diff --git a/arch/arm/mach-s3c/hardware-s3c24xx.h b/arch/arm/mach-s3c/hardware-s3c24xx.h
deleted file mode 100644
index 33b37467d05f..000000000000
--- a/arch/arm/mach-s3c/hardware-s3c24xx.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- */
-
-#ifndef __ASM_ARCH_HARDWARE_S3C24XX_H
-#define __ASM_ARCH_HARDWARE_S3C24XX_H
-
-extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
-
-#endif /* __ASM_ARCH_HARDWARE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c/iic-core.h b/arch/arm/mach-s3c/iic-core.h
index c5cfd5af3874..6672691bd7b8 100644
--- a/arch/arm/mach-s3c/iic-core.h
+++ b/arch/arm/mach-s3c/iic-core.h
@@ -28,11 +28,4 @@ static inline void s3c_i2c1_setname(char *name)
 #endif
 }
 
-static inline void s3c_i2c2_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_I2C2
-	s3c_device_i2c2.name = name;
-#endif
-}
-
 #endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/mach-s3c/init.c b/arch/arm/mach-s3c/init.c
index bf513616f55d..0ac079f23d51 100644
--- a/arch/arm/mach-s3c/init.c
+++ b/arch/arm/mach-s3c/init.c
@@ -63,29 +63,6 @@ void __init s3c_init_cpu(unsigned long idcode,
 	pr_err("The platform is deprecated and scheduled for removal. Please reach to the maintainers of the platform and linux-samsung-soc@vger.kernel.org if you still use it.  Without such feedback, the platform will be removed after 2022.\n");
 }
 
-/* s3c24xx_init_clocks
- *
- * Initialise the clock subsystem and associated information from the
- * given master crystal value.
- *
- * xtal  = 0 -> use default PLL crystal value (normally 12MHz)
- *      != 0 -> PLL crystal value in Hz
-*/
-
-void __init s3c24xx_init_clocks(int xtal)
-{
-	if (xtal == 0)
-		xtal = 12*1000*1000;
-
-	if (cpu == NULL)
-		panic("s3c24xx_init_clocks: no cpu setup?\n");
-
-	if (cpu->init_clocks == NULL)
-		panic("s3c24xx_init_clocks: cpu has no clock init\n");
-	else
-		(cpu->init_clocks)(xtal);
-}
-
 /* uart management */
 #if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
 static int nr_uarts __initdata = 0;
@@ -150,8 +127,7 @@ static int __init s3c_arch_init(void)
 	int ret;
 
 	/* init is only needed for ATAGS based platforms */
-	if (!IS_ENABLED(CONFIG_ATAGS) ||
-	    (!soc_is_s3c24xx() && !soc_is_s3c64xx()))
+	if (!IS_ENABLED(CONFIG_ATAGS))
 		return 0;
 
 	// do the correct init for cpu
diff --git a/arch/arm/mach-s3c/iotiming-s3c2410.c b/arch/arm/mach-s3c/iotiming-s3c2410.c
deleted file mode 100644
index 09f388d8f824..000000000000
--- a/arch/arm/mach-s3c/iotiming-s3c2410.c
+++ /dev/null
@@ -1,472 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006-2009 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/cpufreq.h>
-#include <linux/seq_file.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include "map.h"
-#include "regs-clock.h"
-
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-
-#include "regs-mem-s3c24xx.h"
-
-#define print_ns(x) ((x) / 10), ((x) % 10)
-
-/**
- * s3c2410_print_timing - print bank timing data for debug purposes
- * @pfx: The prefix to put on the output
- * @timings: The timing inforamtion to print.
-*/
-static void s3c2410_print_timing(const char *pfx,
-				 struct s3c_iotimings *timings)
-{
-	struct s3c2410_iobank_timing *bt;
-	int bank;
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bt = timings->bank[bank].io_2410;
-		if (!bt)
-			continue;
-
-		printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
-		       "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
-		       print_ns(bt->tacs),
-		       print_ns(bt->tcos),
-		       print_ns(bt->tacc),
-		       print_ns(bt->tcoh),
-		       print_ns(bt->tcah));
-	}
-}
-
-/**
- * bank_reg - convert bank number to pointer to the control register.
- * @bank: The IO bank number.
- */
-static inline void __iomem *bank_reg(unsigned int bank)
-{
-	return S3C2410_BANKCON0 + (bank << 2);
-}
-
-/**
- * bank_is_io - test whether bank is used for IO
- * @bankcon: The bank control register.
- *
- * This is a simplistic test to see if any BANKCON[x] is not an IO
- * bank. It currently does not take into account whether BWSCON has
- * an illegal width-setting in it, or if the pin connected to nCS[x]
- * is actually being handled as a chip-select.
- */
-static inline int bank_is_io(unsigned long bankcon)
-{
-	return !(bankcon & S3C2410_BANKCON_SDRAM);
-}
-
-/**
- * to_div - convert cycle time to divisor
- * @cyc: The cycle time, in 10ths of nanoseconds.
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- *
- * Convert the given cycle time into the divisor to use to obtain it from
- * HCLK.
-*/
-static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
-{
-	if (cyc == 0)
-		return 0;
-
-	return DIV_ROUND_UP(cyc, hclk_tns);
-}
-
-/**
- * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
- * @cyc: The cycle time, in 10ths of nanoseconds.
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- * @v: Pointer to register to alter.
- * @shift: The shift to get to the control bits.
- *
- * Calculate the divisor, and turn it into the correct control bits to
- * set in the result, @v.
- */
-static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
-			      unsigned long *v, int shift)
-{
-	unsigned int div = to_div(cyc, hclk_tns);
-	unsigned long val;
-
-	s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
-		       __func__, cyc, hclk_tns, shift, div);
-
-	switch (div) {
-	case 0:
-		val = 0;
-		break;
-	case 1:
-		val = 1;
-		break;
-	case 2:
-		val = 2;
-		break;
-	case 3:
-	case 4:
-		val = 3;
-		break;
-	default:
-		return -1;
-	}
-
-	*v |= val << shift;
-	return 0;
-}
-
-static int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
-{
-	/* Currently no support for Tacp calculations. */
-	return 0;
-}
-
-/**
- * calc_tacc - calculate divisor control for tacc.
- * @cyc: The cycle time, in 10ths of nanoseconds.
- * @nwait_en: IS nWAIT enabled for this bank.
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- * @v: Pointer to register to alter.
- *
- * Calculate the divisor control for tACC, taking into account whether
- * the bank has nWAIT enabled. The result is used to modify the value
- * pointed to by @v.
-*/
-static int calc_tacc(unsigned int cyc, int nwait_en,
-		     unsigned long hclk_tns, unsigned long *v)
-{
-	unsigned int div = to_div(cyc, hclk_tns);
-	unsigned long val;
-
-	s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
-		       __func__, cyc, nwait_en, hclk_tns, div);
-
-	/* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
-	if (nwait_en && div < 4)
-		div = 4;
-
-	switch (div) {
-	case 0:
-		val = 0;
-		break;
-
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-		val = div - 1;
-		break;
-
-	case 5:
-	case 6:
-		val = 4;
-		break;
-
-	case 7:
-	case 8:
-		val = 5;
-		break;
-
-	case 9:
-	case 10:
-		val = 6;
-		break;
-
-	case 11:
-	case 12:
-	case 13:
-	case 14:
-		val = 7;
-		break;
-
-	default:
-		return -1;
-	}
-
-	*v |= val << 8;
-	return 0;
-}
-
-/**
- * s3c2410_calc_bank - calculate bank timing information
- * @cfg: The configuration we need to calculate for.
- * @bt: The bank timing information.
- *
- * Given the cycle timine for a bank @bt, calculate the new BANKCON
- * setting for the @cfg timing. This updates the timing information
- * ready for the cpu frequency change.
- */
-static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
-			     struct s3c2410_iobank_timing *bt)
-{
-	unsigned long hclk = cfg->freq.hclk_tns;
-	unsigned long res;
-	int ret;
-
-	res  = bt->bankcon;
-	res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
-
-	/* tacp: 2,3,4,5 */
-	/* tcah: 0,1,2,4 */
-	/* tcoh: 0,1,2,4 */
-	/* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
-	/* tcos: 0,1,2,4 */
-	/* tacs: 0,1,2,4 */
-
-	ret  = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
-	ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
-	ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
-	ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
-
-	if (ret)
-		return -EINVAL;
-
-	ret |= calc_tacp(bt->tacp, hclk, &res);
-	ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
-
-	if (ret)
-		return -EINVAL;
-
-	bt->bankcon = res;
-	return 0;
-}
-
-static const unsigned int tacc_tab[] = {
-	[0]	= 1,
-	[1]	= 2,
-	[2]	= 3,
-	[3]	= 4,
-	[4]	= 6,
-	[5]	= 9,
-	[6]	= 10,
-	[7]	= 14,
-};
-
-/**
- * get_tacc - turn tACC value into cycle time
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- * @val: The bank timing register value, shifted down.
- */
-static unsigned int get_tacc(unsigned long hclk_tns,
-			     unsigned long val)
-{
-	val &= 7;
-	return hclk_tns * tacc_tab[val];
-}
-
-/**
- * get_0124 - turn 0/1/2/4 divider into cycle time
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- * @val: The bank timing register value, shifed down.
- */
-static unsigned int get_0124(unsigned long hclk_tns,
-			     unsigned long val)
-{
-	val &= 3;
-	return hclk_tns * ((val == 3) ? 4 : val);
-}
-
-/**
- * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
- * @cfg: The frequency configuration
- * @bt: The bank timing to fill in (uses cached BANKCON)
- *
- * Given the BANKCON setting in @bt and the current frequency settings
- * in @cfg, update the cycle timing information.
- */
-static void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
-				     struct s3c2410_iobank_timing *bt)
-{
-	unsigned long bankcon = bt->bankcon;
-	unsigned long hclk = cfg->freq.hclk_tns;
-
-	bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
-	bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
-	bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
-	bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
-	bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
-}
-
-/**
- * s3c2410_iotiming_debugfs - debugfs show io bank timing information
- * @seq: The seq_file to write output to using seq_printf().
- * @cfg: The current configuration.
- * @iob: The IO bank information to decode.
- */
-void s3c2410_iotiming_debugfs(struct seq_file *seq,
-			      struct s3c_cpufreq_config *cfg,
-			      union s3c_iobank *iob)
-{
-	struct s3c2410_iobank_timing *bt = iob->io_2410;
-	unsigned long bankcon = bt->bankcon;
-	unsigned long hclk = cfg->freq.hclk_tns;
-	unsigned int tacs;
-	unsigned int tcos;
-	unsigned int tacc;
-	unsigned int tcoh;
-	unsigned int tcah;
-
-	seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
-
-	tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
-	tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
-	tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
-	tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
-	tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
-
-	seq_printf(seq,
-		   "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
-		   print_ns(bt->tacs),
-		   print_ns(bt->tcos),
-		   print_ns(bt->tacc),
-		   print_ns(bt->tcoh),
-		   print_ns(bt->tcah));
-
-	seq_printf(seq,
-		   "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
-		   print_ns(tacs),
-		   print_ns(tcos),
-		   print_ns(tacc),
-		   print_ns(tcoh),
-		   print_ns(tcah));
-}
-
-/**
- * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
- * @cfg: The frequency configuration
- * @iot: The IO timing information to fill out.
- *
- * Calculate the new values for the banks in @iot based on the new
- * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
- * to update the timing when necessary.
- */
-int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
-			  struct s3c_iotimings *iot)
-{
-	struct s3c2410_iobank_timing *bt;
-	unsigned long bankcon;
-	int bank;
-	int ret;
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bankcon = __raw_readl(bank_reg(bank));
-		bt = iot->bank[bank].io_2410;
-
-		if (!bt)
-			continue;
-
-		bt->bankcon = bankcon;
-
-		ret = s3c2410_calc_bank(cfg, bt);
-		if (ret) {
-			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
-			       __func__, bank);
-			goto err;
-		}
-
-		s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
-			       __func__, bank, bt->bankcon);
-	}
-
-	return 0;
- err:
-	return ret;
-}
-
-/**
- * s3c2410_iotiming_set - set the IO timings from the given setup.
- * @cfg: The frequency configuration
- * @iot: The IO timing information to use.
- *
- * Set all the currently used IO bank timing information generated
- * by s3c2410_iotiming_calc() once the core has validated that all
- * the new values are within permitted bounds.
- */
-void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
-			  struct s3c_iotimings *iot)
-{
-	struct s3c2410_iobank_timing *bt;
-	int bank;
-
-	/* set the io timings from the specifier */
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bt = iot->bank[bank].io_2410;
-		if (!bt)
-			continue;
-
-		__raw_writel(bt->bankcon, bank_reg(bank));
-	}
-}
-
-/**
- * s3c2410_iotiming_get - Get the timing information from current registers.
- * @cfg: The frequency configuration
- * @timings: The IO timing information to fill out.
- *
- * Calculate the @timings timing information from the current frequency
- * information in @cfg, and the new frequency configuration
- * through all the IO banks, reading the state and then updating @iot
- * as necessary.
- *
- * This is used at the moment on initialisation to get the current
- * configuration so that boards do not have to carry their own setup
- * if the timings are correct on initialisation.
- */
-
-int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
-			 struct s3c_iotimings *timings)
-{
-	struct s3c2410_iobank_timing *bt;
-	unsigned long bankcon;
-	unsigned long bwscon;
-	int bank;
-
-	bwscon = __raw_readl(S3C2410_BWSCON);
-
-	/* look through all banks to see what is currently set. */
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bankcon = __raw_readl(bank_reg(bank));
-
-		if (!bank_is_io(bankcon))
-			continue;
-
-		s3c_freq_iodbg("%s: bank %d: con %08lx\n",
-			       __func__, bank, bankcon);
-
-		bt = kzalloc(sizeof(*bt), GFP_KERNEL);
-		if (!bt)
-			return -ENOMEM;
-
-		/* find out in nWait is enabled for bank. */
-
-		if (bank != 0) {
-			unsigned long tmp  = S3C2410_BWSCON_GET(bwscon, bank);
-			if (tmp & S3C2410_BWSCON_WS)
-				bt->nwait_en = 1;
-		}
-
-		timings->bank[bank].io_2410 = bt;
-		bt->bankcon = bankcon;
-
-		s3c2410_iotiming_getbank(cfg, bt);
-	}
-
-	s3c2410_print_timing("get", timings);
-	return 0;
-}
diff --git a/arch/arm/mach-s3c/iotiming-s3c2412.c b/arch/arm/mach-s3c/iotiming-s3c2412.c
deleted file mode 100644
index 003f89c4dc53..000000000000
--- a/arch/arm/mach-s3c/iotiming-s3c2412.c
+++ /dev/null
@@ -1,278 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006-2008 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// S3C2412/S3C2443 (PL093 based) IO timing support
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/seq_file.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-#include <linux/amba/pl093.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "cpu.h"
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-
-#include "s3c2412.h"
-
-#define print_ns(x) ((x) / 10), ((x) % 10)
-
-/**
- * s3c2412_print_timing - print timing information via printk.
- * @pfx: The prefix to print each line with.
- * @iot: The IO timing information
- */
-static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
-{
-	struct s3c2412_iobank_timing *bt;
-	unsigned int bank;
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bt = iot->bank[bank].io_2412;
-		if (!bt)
-			continue;
-
-		printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
-		       "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
-		       print_ns(bt->idcy),
-		       print_ns(bt->wstrd),
-		       print_ns(bt->wstwr),
-		       print_ns(bt->wstoen),
-		       print_ns(bt->wstwen),
-		       print_ns(bt->wstbrd));
-	}
-}
-
-/**
- * to_div - turn a cycle length into a divisor setting.
- * @cyc_tns: The cycle time in 10ths of nanoseconds.
- * @clk_tns: The clock period in 10ths of nanoseconds.
- */
-static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
-{
-	return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
-}
-
-/**
- * calc_timing - calculate timing divisor value and check in range.
- * @hwtm: The hardware timing in 10ths of nanoseconds.
- * @clk_tns: The clock period in 10ths of nanoseconds.
- * @err: Pointer to err variable to update in event of failure.
- */
-static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
-				unsigned int *err)
-{
-	unsigned int ret = to_div(hwtm, clk_tns);
-
-	if (ret > 0xf)
-		*err = -EINVAL;
-
-	return ret;
-}
-
-/**
- * s3c2412_calc_bank - calculate the bank divisor settings.
- * @cfg: The current frequency configuration.
- * @bt: The bank timing.
- */
-static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
-			     struct s3c2412_iobank_timing *bt)
-{
-	unsigned int hclk = cfg->freq.hclk_tns;
-	int err = 0;
-
-	bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
-	bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
-	bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
-	bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
-	bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
-	bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
-
-	return err;
-}
-
-/**
- * s3c2412_iotiming_debugfs - debugfs show io bank timing information
- * @seq: The seq_file to write output to using seq_printf().
- * @cfg: The current configuration.
- * @iob: The IO bank information to decode.
-*/
-void s3c2412_iotiming_debugfs(struct seq_file *seq,
-			      struct s3c_cpufreq_config *cfg,
-			      union s3c_iobank *iob)
-{
-	struct s3c2412_iobank_timing *bt = iob->io_2412;
-
-	seq_printf(seq,
-		   "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
-		   "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
-		   print_ns(bt->idcy),
-		   print_ns(bt->wstrd),
-		   print_ns(bt->wstwr),
-		   print_ns(bt->wstoen),
-		   print_ns(bt->wstwen),
-		   print_ns(bt->wstbrd));
-}
-
-/**
- * s3c2412_iotiming_calc - calculate all the bank divisor settings.
- * @cfg: The current frequency configuration.
- * @iot: The bank timing information.
- *
- * Calculate the timing information for all the banks that are
- * configured as IO, using s3c2412_calc_bank().
- */
-int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
-			  struct s3c_iotimings *iot)
-{
-	struct s3c2412_iobank_timing *bt;
-	int bank;
-	int ret;
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bt = iot->bank[bank].io_2412;
-		if (!bt)
-			continue;
-
-		ret = s3c2412_calc_bank(cfg, bt);
-		if (ret) {
-			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
-			       __func__, bank);
-			goto err;
-		}
-	}
-
-	return 0;
- err:
-	return ret;
-}
-
-/**
- * s3c2412_iotiming_set - set the timing information
- * @cfg: The current frequency configuration.
- * @iot: The bank timing information.
- *
- * Set the IO bank information from the details calculated earlier from
- * calling s3c2412_iotiming_calc().
- */
-void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
-			  struct s3c_iotimings *iot)
-{
-	struct s3c2412_iobank_timing *bt;
-	void __iomem *regs;
-	int bank;
-
-	/* set the io timings from the specifier */
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bt = iot->bank[bank].io_2412;
-		if (!bt)
-			continue;
-
-		regs = S3C2412_SSMC_BANK(bank);
-
-		__raw_writel(bt->smbidcyr, regs + SMBIDCYR);
-		__raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
-		__raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
-		__raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
-		__raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
-		__raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
-	}
-}
-
-static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
-{
-	return (reg & 0xf) * clock;
-}
-
-static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
-				     struct s3c2412_iobank_timing *bt,
-				     unsigned int bank)
-{
-	unsigned long clk = cfg->freq.hclk_tns;  /* ssmc clock??? */
-	void __iomem *regs = S3C2412_SSMC_BANK(bank);
-
-	bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
-	bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
-	bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
-	bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
-	bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
-}
-
-/**
- * bank_is_io - return true if bank is (possibly) IO.
- * @bank: The bank number.
- * @bankcfg: The value of S3C2412_EBI_BANKCFG.
- */
-static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
-{
-	if (bank < 2)
-		return true;
-
-	return !(bankcfg & (1 << bank));
-}
-
-int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
-			 struct s3c_iotimings *timings)
-{
-	struct s3c2412_iobank_timing *bt;
-	u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
-	unsigned int bank;
-
-	/* look through all banks to see what is currently set. */
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		if (!bank_is_io(bank, bankcfg))
-			continue;
-
-		bt = kzalloc(sizeof(*bt), GFP_KERNEL);
-		if (!bt)
-			return -ENOMEM;
-
-		timings->bank[bank].io_2412 = bt;
-		s3c2412_iotiming_getbank(cfg, bt, bank);
-	}
-
-	s3c2412_print_timing("get", timings);
-	return 0;
-}
-
-/* this is in here as it is so small, it doesn't currently warrant a file
- * to itself. We expect that any s3c24xx needing this is going to also
- * need the iotiming support.
- */
-void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
-	struct s3c_cpufreq_board *board = cfg->board;
-	u32 refresh;
-
-	WARN_ON(board == NULL);
-
-	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
-	 * down to ensure that we do not overflow 32 bit numbers.
-	 *
-	 * This should work for HCLK up to 133MHz and refresh period up
-	 * to 30usec.
-	 */
-
-	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
-	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
-	refresh &= ((1 << 16) - 1);
-
-	s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
-
-	__raw_writel(refresh, S3C2412_REFRESH);
-}
diff --git a/arch/arm/mach-s3c/irq-pm-s3c24xx.c b/arch/arm/mach-s3c/irq-pm-s3c24xx.c
deleted file mode 100644
index 55f41135ad70..000000000000
--- a/arch/arm/mach-s3c/irq-pm-s3c24xx.c
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2003-2004 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//	http://armlinux.simtec.co.uk/
-//
-// S3C24XX - IRQ PM code
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/syscore_ops.h>
-#include <linux/io.h>
-
-#include "cpu.h"
-#include "pm.h"
-#include "map-base.h"
-#include "map-s3c.h"
-
-#include "regs-irq.h"
-#include "regs-gpio.h"
-#include "pm-core.h"
-
-#include <asm/irq.h>
-
-int s3c_irq_wake(struct irq_data *data, unsigned int state)
-{
-	unsigned long irqbit = 1 << data->hwirq;
-
-	if (!(s3c_irqwake_intallow & irqbit))
-		return -ENOENT;
-
-	pr_info("wake %s for hwirq %lu\n",
-		state ? "enabled" : "disabled", data->hwirq);
-
-	if (!state)
-		s3c_irqwake_intmask |= irqbit;
-	else
-		s3c_irqwake_intmask &= ~irqbit;
-
-	return 0;
-}
-
-static struct sleep_save irq_save[] = {
-	SAVE_ITEM(S3C2410_INTMSK),
-	SAVE_ITEM(S3C2410_INTSUBMSK),
-};
-
-/* the extint values move between the s3c2410/s3c2440 and the s3c2412
- * so we use an array to hold them, and to calculate the address of
- * the register at run-time
-*/
-
-static unsigned long save_extint[3];
-static unsigned long save_eintflt[4];
-static unsigned long save_eintmask;
-
-static int s3c24xx_irq_suspend(void)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
-		save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
-
-	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
-		save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
-
-	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
-	save_eintmask = __raw_readl(S3C24XX_EINTMASK);
-
-	return 0;
-}
-
-static void s3c24xx_irq_resume(void)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
-		__raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
-
-	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
-		__raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
-
-	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
-	__raw_writel(save_eintmask, S3C24XX_EINTMASK);
-}
-
-struct syscore_ops s3c24xx_irq_syscore_ops = {
-	.suspend	= s3c24xx_irq_suspend,
-	.resume		= s3c24xx_irq_resume,
-};
-
-#ifdef CONFIG_CPU_S3C2416
-static struct sleep_save s3c2416_irq_save[] = {
-	SAVE_ITEM(S3C2416_INTMSK2),
-};
-
-static int s3c2416_irq_suspend(void)
-{
-	s3c_pm_do_save(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save));
-
-	return 0;
-}
-
-static void s3c2416_irq_resume(void)
-{
-	s3c_pm_do_restore(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save));
-}
-
-struct syscore_ops s3c2416_irq_syscore_ops = {
-	.suspend	= s3c2416_irq_suspend,
-	.resume		= s3c2416_irq_resume,
-};
-#endif
diff --git a/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c b/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c
deleted file mode 100644
index 84cf86376ded..000000000000
--- a/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c
+++ /dev/null
@@ -1,9 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <linux/stddef.h>
-#include <linux/export.h>
-#include <linux/spi/s3c24xx-fiq.h>
-
-EXPORT_SYMBOL(s3c24xx_spi_fiq_rx);
-EXPORT_SYMBOL(s3c24xx_spi_fiq_txrx);
-EXPORT_SYMBOL(s3c24xx_spi_fiq_tx);
diff --git a/arch/arm/mach-s3c/irq-s3c24xx-fiq.S b/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
deleted file mode 100644
index 5d238d9a798e..000000000000
--- a/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
+++ /dev/null
@@ -1,112 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* linux/drivers/spi/spi_s3c24xx_fiq.S
- *
- * Copyright 2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX SPI - FIQ pseudo-DMA transfer code
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-#include "map.h"
-#include "regs-irq.h"
-
-#include <linux/spi/s3c24xx-fiq.h>
-
-#define S3C2410_SPTDAT           (0x10)
-#define S3C2410_SPRDAT           (0x14)
-
-	.text
-
-	@ entry to these routines is as follows, with the register names
-	@ defined in fiq.h so that they can be shared with the C files which
-	@ setup the calling registers.
-	@
-	@ fiq_rirq	The base of the IRQ registers to find S3C2410_SRCPND
-	@ fiq_rtmp	Temporary register to hold tx/rx data
-	@ fiq_rspi	The base of the SPI register block
-	@ fiq_rtx	The tx buffer pointer
-	@ fiq_rrx	The rx buffer pointer
-	@ fiq_rcount	The number of bytes to move
-
-	@ each entry starts with a word entry of how long it is
-	@ and an offset to the irq acknowledgment word
-
-ENTRY(s3c24xx_spi_fiq_rx)
-	.word	fiq_rx_end - fiq_rx_start
-	.word	fiq_rx_irq_ack - fiq_rx_start
-fiq_rx_start:
-	ldr	fiq_rtmp, fiq_rx_irq_ack
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
-
-	ldrb	fiq_rtmp, [ fiq_rspi, #  S3C2410_SPRDAT ]
-	strb	fiq_rtmp, [ fiq_rrx ], #1
-
-	mov	fiq_rtmp, #0xff
-	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
-
-	subs	fiq_rcount, fiq_rcount, #1
-	subsne	pc, lr, #4		@@ return, still have work to do
-
-	@@ set IRQ controller so that next op will trigger IRQ
-	mov	fiq_rtmp, #0
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
-	subs	pc, lr, #4
-
-fiq_rx_irq_ack:
-	.word	0
-fiq_rx_end:
-
-ENTRY(s3c24xx_spi_fiq_txrx)
-	.word	fiq_txrx_end - fiq_txrx_start
-	.word	fiq_txrx_irq_ack - fiq_txrx_start
-fiq_txrx_start:
-
-	ldrb	fiq_rtmp, [ fiq_rspi, #  S3C2410_SPRDAT ]
-	strb	fiq_rtmp, [ fiq_rrx ], #1
-
-	ldr	fiq_rtmp, fiq_txrx_irq_ack
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
-
-	ldrb	fiq_rtmp, [ fiq_rtx ], #1
-	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
-
-	subs	fiq_rcount, fiq_rcount, #1
-	subsne	pc, lr, #4		@@ return, still have work to do
-
-	mov	fiq_rtmp, #0
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
-	subs	pc, lr, #4
-
-fiq_txrx_irq_ack:
-	.word	0
-
-fiq_txrx_end:
-
-ENTRY(s3c24xx_spi_fiq_tx)
-	.word	fiq_tx_end - fiq_tx_start
-	.word	fiq_tx_irq_ack - fiq_tx_start
-fiq_tx_start:
-	ldrb	fiq_rtmp, [ fiq_rspi, #  S3C2410_SPRDAT ]
-
-	ldr	fiq_rtmp, fiq_tx_irq_ack
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
-
-	ldrb	fiq_rtmp, [ fiq_rtx ], #1
-	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
-
-	subs	fiq_rcount, fiq_rcount, #1
-	subsne	pc, lr, #4		@@ return, still have work to do
-
-	mov	fiq_rtmp, #0
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
-	subs	pc, lr, #4
-
-fiq_tx_irq_ack:
-	.word	0
-
-fiq_tx_end:
-
-	.end
diff --git a/arch/arm/mach-s3c/irq-s3c24xx.c b/arch/arm/mach-s3c/irq-s3c24xx.c
deleted file mode 100644
index 088cc04b7431..000000000000
--- a/arch/arm/mach-s3c/irq-s3c24xx.c
+++ /dev/null
@@ -1,1352 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * S3C24XX IRQ handling
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
-*/
-
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/irqdomain.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/chained_irq.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-#include <linux/spi/s3c24xx.h>
-
-#include <asm/exception.h>
-#include <asm/mach/irq.h>
-
-#include "irqs.h"
-#include "regs-irq.h"
-#include "regs-gpio.h"
-
-#include "cpu.h"
-#include "regs-irqtype.h"
-#include "pm.h"
-#include "s3c24xx.h"
-
-#define S3C_IRQTYPE_NONE	0
-#define S3C_IRQTYPE_EINT	1
-#define S3C_IRQTYPE_EDGE	2
-#define S3C_IRQTYPE_LEVEL	3
-
-struct s3c_irq_data {
-	unsigned int type;
-	unsigned long offset;
-	unsigned long parent_irq;
-
-	/* data gets filled during init */
-	struct s3c_irq_intc *intc;
-	unsigned long sub_bits;
-	struct s3c_irq_intc *sub_intc;
-};
-
-/*
- * Structure holding the controller data
- * @reg_pending		register holding pending irqs
- * @reg_intpnd		special register intpnd in main intc
- * @reg_mask		mask register
- * @domain		irq_domain of the controller
- * @parent		parent controller for ext and sub irqs
- * @irqs		irq-data, always s3c_irq_data[32]
- */
-struct s3c_irq_intc {
-	void __iomem		*reg_pending;
-	void __iomem		*reg_intpnd;
-	void __iomem		*reg_mask;
-	struct irq_domain	*domain;
-	struct s3c_irq_intc	*parent;
-	struct s3c_irq_data	*irqs;
-};
-
-/*
- * Array holding pointers to the global controller structs
- * [0] ... main_intc
- * [1] ... sub_intc
- * [2] ... main_intc2 on s3c2416
- */
-static struct s3c_irq_intc *s3c_intc[3];
-
-static void s3c_irq_mask(struct irq_data *data)
-{
-	struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
-	struct s3c_irq_intc *intc = irq_data->intc;
-	struct s3c_irq_intc *parent_intc = intc->parent;
-	struct s3c_irq_data *parent_data;
-	unsigned long mask;
-	unsigned int irqno;
-
-	mask = readl_relaxed(intc->reg_mask);
-	mask |= (1UL << irq_data->offset);
-	writel_relaxed(mask, intc->reg_mask);
-
-	if (parent_intc) {
-		parent_data = &parent_intc->irqs[irq_data->parent_irq];
-
-		/* check to see if we need to mask the parent IRQ
-		 * The parent_irq is always in main_intc, so the hwirq
-		 * for find_mapping does not need an offset in any case.
-		 */
-		if ((mask & parent_data->sub_bits) == parent_data->sub_bits) {
-			irqno = irq_find_mapping(parent_intc->domain,
-					 irq_data->parent_irq);
-			s3c_irq_mask(irq_get_irq_data(irqno));
-		}
-	}
-}
-
-static void s3c_irq_unmask(struct irq_data *data)
-{
-	struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
-	struct s3c_irq_intc *intc = irq_data->intc;
-	struct s3c_irq_intc *parent_intc = intc->parent;
-	unsigned long mask;
-	unsigned int irqno;
-
-	mask = readl_relaxed(intc->reg_mask);
-	mask &= ~(1UL << irq_data->offset);
-	writel_relaxed(mask, intc->reg_mask);
-
-	if (parent_intc) {
-		irqno = irq_find_mapping(parent_intc->domain,
-					 irq_data->parent_irq);
-		s3c_irq_unmask(irq_get_irq_data(irqno));
-	}
-}
-
-static inline void s3c_irq_ack(struct irq_data *data)
-{
-	struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
-	struct s3c_irq_intc *intc = irq_data->intc;
-	unsigned long bitval = 1UL << irq_data->offset;
-
-	writel_relaxed(bitval, intc->reg_pending);
-	if (intc->reg_intpnd)
-		writel_relaxed(bitval, intc->reg_intpnd);
-}
-
-static int s3c_irq_type(struct irq_data *data, unsigned int type)
-{
-	switch (type) {
-	case IRQ_TYPE_NONE:
-		break;
-	case IRQ_TYPE_EDGE_RISING:
-	case IRQ_TYPE_EDGE_FALLING:
-	case IRQ_TYPE_EDGE_BOTH:
-		irq_set_handler(data->irq, handle_edge_irq);
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-	case IRQ_TYPE_LEVEL_HIGH:
-		irq_set_handler(data->irq, handle_level_irq);
-		break;
-	default:
-		pr_err("No such irq type %d\n", type);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int s3c_irqext_type_set(void __iomem *gpcon_reg,
-			       void __iomem *extint_reg,
-			       unsigned long gpcon_offset,
-			       unsigned long extint_offset,
-			       unsigned int type)
-{
-	unsigned long newvalue = 0, value;
-
-	/* Set the GPIO to external interrupt mode */
-	value = readl_relaxed(gpcon_reg);
-	value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
-	writel_relaxed(value, gpcon_reg);
-
-	/* Set the external interrupt to pointed trigger type */
-	switch (type)
-	{
-		case IRQ_TYPE_NONE:
-			pr_warn("No edge setting!\n");
-			break;
-
-		case IRQ_TYPE_EDGE_RISING:
-			newvalue = S3C2410_EXTINT_RISEEDGE;
-			break;
-
-		case IRQ_TYPE_EDGE_FALLING:
-			newvalue = S3C2410_EXTINT_FALLEDGE;
-			break;
-
-		case IRQ_TYPE_EDGE_BOTH:
-			newvalue = S3C2410_EXTINT_BOTHEDGE;
-			break;
-
-		case IRQ_TYPE_LEVEL_LOW:
-			newvalue = S3C2410_EXTINT_LOWLEV;
-			break;
-
-		case IRQ_TYPE_LEVEL_HIGH:
-			newvalue = S3C2410_EXTINT_HILEV;
-			break;
-
-		default:
-			pr_err("No such irq type %d\n", type);
-			return -EINVAL;
-	}
-
-	value = readl_relaxed(extint_reg);
-	value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
-	writel_relaxed(value, extint_reg);
-
-	return 0;
-}
-
-static int s3c_irqext_type(struct irq_data *data, unsigned int type)
-{
-	void __iomem *extint_reg;
-	void __iomem *gpcon_reg;
-	unsigned long gpcon_offset, extint_offset;
-
-	if ((data->hwirq >= 4) && (data->hwirq <= 7)) {
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (data->hwirq) * 2;
-		extint_offset = (data->hwirq) * 4;
-	} else if ((data->hwirq >= 8) && (data->hwirq <= 15)) {
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT1;
-		gpcon_offset = (data->hwirq - 8) * 2;
-		extint_offset = (data->hwirq - 8) * 4;
-	} else if ((data->hwirq >= 16) && (data->hwirq <= 23)) {
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT2;
-		gpcon_offset = (data->hwirq - 8) * 2;
-		extint_offset = (data->hwirq - 16) * 4;
-	} else {
-		return -EINVAL;
-	}
-
-	return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
-				   extint_offset, type);
-}
-
-static int s3c_irqext0_type(struct irq_data *data, unsigned int type)
-{
-	void __iomem *extint_reg;
-	void __iomem *gpcon_reg;
-	unsigned long gpcon_offset, extint_offset;
-
-	if (data->hwirq <= 3) {
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (data->hwirq) * 2;
-		extint_offset = (data->hwirq) * 4;
-	} else {
-		return -EINVAL;
-	}
-
-	return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
-				   extint_offset, type);
-}
-
-static struct irq_chip s3c_irq_chip = {
-	.name		= "s3c",
-	.irq_ack	= s3c_irq_ack,
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_set_type	= s3c_irq_type,
-	.irq_set_wake	= s3c_irq_wake
-};
-
-static struct irq_chip s3c_irq_level_chip = {
-	.name		= "s3c-level",
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_ack	= s3c_irq_ack,
-	.irq_set_type	= s3c_irq_type,
-};
-
-static struct irq_chip s3c_irqext_chip = {
-	.name		= "s3c-ext",
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_ack	= s3c_irq_ack,
-	.irq_set_type	= s3c_irqext_type,
-	.irq_set_wake	= s3c_irqext_wake
-};
-
-static struct irq_chip s3c_irq_eint0t4 = {
-	.name		= "s3c-ext0",
-	.irq_ack	= s3c_irq_ack,
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_set_wake	= s3c_irq_wake,
-	.irq_set_type	= s3c_irqext0_type,
-};
-
-static void s3c_irq_demux(struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	struct s3c_irq_data *irq_data = irq_desc_get_chip_data(desc);
-	struct s3c_irq_intc *intc = irq_data->intc;
-	struct s3c_irq_intc *sub_intc = irq_data->sub_intc;
-	unsigned int n, offset;
-	unsigned long src, msk;
-
-	/* we're using individual domains for the non-dt case
-	 * and one big domain for the dt case where the subintc
-	 * starts at hwirq number 32.
-	 */
-	offset = irq_domain_get_of_node(intc->domain) ? 32 : 0;
-
-	chained_irq_enter(chip, desc);
-
-	src = readl_relaxed(sub_intc->reg_pending);
-	msk = readl_relaxed(sub_intc->reg_mask);
-
-	src &= ~msk;
-	src &= irq_data->sub_bits;
-
-	while (src) {
-		n = __ffs(src);
-		src &= ~(1 << n);
-		generic_handle_domain_irq(sub_intc->domain, offset + n);
-	}
-
-	chained_irq_exit(chip, desc);
-}
-
-static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc,
-				      struct pt_regs *regs, int intc_offset)
-{
-	int pnd;
-	int offset;
-
-	pnd = readl_relaxed(intc->reg_intpnd);
-	if (!pnd)
-		return false;
-
-	/* non-dt machines use individual domains */
-	if (!irq_domain_get_of_node(intc->domain))
-		intc_offset = 0;
-
-	/* We have a problem that the INTOFFSET register does not always
-	 * show one interrupt. Occasionally we get two interrupts through
-	 * the prioritiser, and this causes the INTOFFSET register to show
-	 * what looks like the logical-or of the two interrupt numbers.
-	 *
-	 * Thanks to Klaus, Shannon, et al for helping to debug this problem
-	 */
-	offset = readl_relaxed(intc->reg_intpnd + 4);
-
-	/* Find the bit manually, when the offset is wrong.
-	 * The pending register only ever contains the one bit of the next
-	 * interrupt to handle.
-	 */
-	if (!(pnd & (1 << offset)))
-		offset =  __ffs(pnd);
-
-	generic_handle_domain_irq(intc->domain, intc_offset + offset);
-	return true;
-}
-
-static asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs)
-{
-	do {
-		/*
-		 * For platform based machines, neither ERR nor NULL can happen here.
-		 * The s3c24xx_handle_irq() will be set as IRQ handler iff this succeeds:
-		 *
-		 *    s3c_intc[0] = s3c24xx_init_intc()
-		 *
-		 * If this fails, the next calls to s3c24xx_init_intc() won't be executed.
-		 *
-		 * For DT machine, s3c_init_intc_of() could set the IRQ handler without
-		 * setting s3c_intc[0] only if it was called with num_ctrl=0. There is no
-		 * such code path, so again the s3c_intc[0] will have a valid pointer if
-		 * set_handle_irq() is called.
-		 *
-		 * Therefore in s3c24xx_handle_irq(), the s3c_intc[0] is always something.
-		 */
-		if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
-			continue;
-
-		if (!IS_ERR_OR_NULL(s3c_intc[2]))
-			if (s3c24xx_handle_intc(s3c_intc[2], regs, 64))
-				continue;
-
-		break;
-	} while (1);
-}
-
-#ifdef CONFIG_FIQ
-/**
- * s3c24xx_set_fiq - set the FIQ routing
- * @irq: IRQ number to route to FIQ on processor.
- * @ack_ptr: pointer to a location for storing the bit mask
- * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
- *
- * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
- * @on is true, the @irq is checked to see if it can be routed and the
- * interrupt controller updated to route the IRQ. If @on is false, the FIQ
- * routing is cleared, regardless of which @irq is specified.
- *
- * returns the mask value for the register.
- */
-int s3c24xx_set_fiq(unsigned int irq, u32 *ack_ptr, bool on)
-{
-	u32 intmod;
-	unsigned offs;
-
-	if (on) {
-		offs = irq - FIQ_START;
-		if (offs > 31)
-			return 0;
-
-		intmod = 1 << offs;
-	} else {
-		intmod = 0;
-	}
-
-	if (ack_ptr)
-		*ack_ptr = intmod;
-	writel_relaxed(intmod, S3C2410_INTMOD);
-
-	return intmod;
-}
-
-EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
-#endif
-
-static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
-							irq_hw_number_t hw)
-{
-	struct s3c_irq_intc *intc = h->host_data;
-	struct s3c_irq_data *irq_data = &intc->irqs[hw];
-	struct s3c_irq_intc *parent_intc;
-	struct s3c_irq_data *parent_irq_data;
-	unsigned int irqno;
-
-	/* attach controller pointer to irq_data */
-	irq_data->intc = intc;
-	irq_data->offset = hw;
-
-	parent_intc = intc->parent;
-
-	/* set handler and flags */
-	switch (irq_data->type) {
-	case S3C_IRQTYPE_NONE:
-		return 0;
-	case S3C_IRQTYPE_EINT:
-		/* On the S3C2412, the EINT0to3 have a parent irq
-		 * but need the s3c_irq_eint0t4 chip
-		 */
-		if (parent_intc && (!soc_is_s3c2412() || hw >= 4))
-			irq_set_chip_and_handler(virq, &s3c_irqext_chip,
-						 handle_edge_irq);
-		else
-			irq_set_chip_and_handler(virq, &s3c_irq_eint0t4,
-						 handle_edge_irq);
-		break;
-	case S3C_IRQTYPE_EDGE:
-		if (parent_intc || intc->reg_pending == S3C2416_SRCPND2)
-			irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
-						 handle_edge_irq);
-		else
-			irq_set_chip_and_handler(virq, &s3c_irq_chip,
-						 handle_edge_irq);
-		break;
-	case S3C_IRQTYPE_LEVEL:
-		if (parent_intc)
-			irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
-						 handle_level_irq);
-		else
-			irq_set_chip_and_handler(virq, &s3c_irq_chip,
-						 handle_level_irq);
-		break;
-	default:
-		pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type);
-		return -EINVAL;
-	}
-
-	irq_set_chip_data(virq, irq_data);
-
-	if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) {
-		if (irq_data->parent_irq > 31) {
-			pr_err("irq-s3c24xx: parent irq %lu is out of range\n",
-			       irq_data->parent_irq);
-			return -EINVAL;
-		}
-
-		parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
-		parent_irq_data->sub_intc = intc;
-		parent_irq_data->sub_bits |= (1UL << hw);
-
-		/* attach the demuxer to the parent irq */
-		irqno = irq_find_mapping(parent_intc->domain,
-					 irq_data->parent_irq);
-		if (!irqno) {
-			pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n",
-			       irq_data->parent_irq);
-			return -EINVAL;
-		}
-		irq_set_chained_handler(irqno, s3c_irq_demux);
-	}
-
-	return 0;
-}
-
-static const struct irq_domain_ops s3c24xx_irq_ops = {
-	.map = s3c24xx_irq_map,
-	.xlate = irq_domain_xlate_twocell,
-};
-
-static void s3c24xx_clear_intc(struct s3c_irq_intc *intc)
-{
-	void __iomem *reg_source;
-	unsigned long pend;
-	unsigned long last;
-	int i;
-
-	/* if intpnd is set, read the next pending irq from there */
-	reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending;
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = readl_relaxed(reg_source);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		writel_relaxed(pend, intc->reg_pending);
-		if (intc->reg_intpnd)
-			writel_relaxed(pend, intc->reg_intpnd);
-
-		pr_info("irq: clearing pending status %08x\n", (int)pend);
-		last = pend;
-	}
-}
-
-static struct s3c_irq_intc * __init s3c24xx_init_intc(struct device_node *np,
-				       struct s3c_irq_data *irq_data,
-				       struct s3c_irq_intc *parent,
-				       unsigned long address)
-{
-	struct s3c_irq_intc *intc;
-	void __iomem *base = (void *)0xf6000000; /* static mapping */
-	int irq_num;
-	int irq_start;
-	int ret;
-
-	intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
-	if (!intc)
-		return ERR_PTR(-ENOMEM);
-
-	intc->irqs = irq_data;
-
-	if (parent)
-		intc->parent = parent;
-
-	/* select the correct data for the controller.
-	 * Need to hard code the irq num start and offset
-	 * to preserve the static mapping for now
-	 */
-	switch (address) {
-	case 0x4a000000:
-		pr_debug("irq: found main intc\n");
-		intc->reg_pending = base;
-		intc->reg_mask = base + 0x08;
-		intc->reg_intpnd = base + 0x10;
-		irq_num = 32;
-		irq_start = S3C2410_IRQ(0);
-		break;
-	case 0x4a000018:
-		pr_debug("irq: found subintc\n");
-		intc->reg_pending = base + 0x18;
-		intc->reg_mask = base + 0x1c;
-		irq_num = 29;
-		irq_start = S3C2410_IRQSUB(0);
-		break;
-	case 0x4a000040:
-		pr_debug("irq: found intc2\n");
-		intc->reg_pending = base + 0x40;
-		intc->reg_mask = base + 0x48;
-		intc->reg_intpnd = base + 0x50;
-		irq_num = 8;
-		irq_start = S3C2416_IRQ(0);
-		break;
-	case 0x560000a4:
-		pr_debug("irq: found eintc\n");
-		base = (void *)0xfd000000;
-
-		intc->reg_mask = base + 0xa4;
-		intc->reg_pending = base + 0xa8;
-		irq_num = 24;
-		irq_start = S3C2410_IRQ(32);
-		break;
-	default:
-		pr_err("irq: unsupported controller address\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	/* now that all the data is complete, init the irq-domain */
-	s3c24xx_clear_intc(intc);
-	intc->domain = irq_domain_add_legacy(np, irq_num, irq_start,
-					     0, &s3c24xx_irq_ops,
-					     intc);
-	if (!intc->domain) {
-		pr_err("irq: could not create irq-domain\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	set_handle_irq(s3c24xx_handle_irq);
-
-	return intc;
-
-err:
-	kfree(intc);
-	return ERR_PTR(ret);
-}
-
-static struct s3c_irq_data __maybe_unused init_eint[32] = {
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
-};
-
-#ifdef CONFIG_CPU_S3C2410
-static struct s3c_irq_data init_s3c2410base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* WDT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2410subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-};
-
-void __init s3c2410_init_irq(void)
-{
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL,
-					0x4a000000);
-	if (IS_ERR(s3c_intc[0])) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2410subint[0],
-					s3c_intc[0], 0x4a000018);
-	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-static struct s3c_irq_data init_s3c2412base[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* WDT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* SDI/CF */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2412eint[32] = {
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 0 }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 1 }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 2 }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 3 }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
-};
-
-static struct s3c_irq_data init_s3c2412subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_NONE, },
-	{ .type = S3C_IRQTYPE_NONE, },
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* SDI */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* CF */
-};
-
-void __init s3c2412_init_irq(void)
-{
-	pr_info("S3C2412: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL,
-					0x4a000000);
-	if (IS_ERR(s3c_intc[0])) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_s3c2412eint[0], s3c_intc[0], 0x560000a4);
-	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2412subint[0],
-					s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2416
-static struct s3c_irq_data init_s3c2416base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* NAND */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_NONE, },
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2416subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-static struct s3c_irq_data init_s3c2416_second[32] = {
-	{ .type = S3C_IRQTYPE_EDGE }, /* 2D */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE }, /* PCM0 */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
-};
-
-void __init s3c2416_init_irq(void)
-{
-	pr_info("S3C2416: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL,
-					0x4a000000);
-	if (IS_ERR(s3c_intc[0])) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
-	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2416subint[0],
-					s3c_intc[0], 0x4a000018);
-
-	s3c_intc[2] = s3c24xx_init_intc(NULL, &init_s3c2416_second[0],
-					NULL, 0x4a000040);
-}
-
-#endif
-
-#ifdef CONFIG_CPU_S3C2440
-static struct s3c_irq_data init_s3c2440base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2440subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-void __init s3c2440_init_irq(void)
-{
-	pr_info("S3C2440: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL,
-					0x4a000000);
-	if (IS_ERR(s3c_intc[0])) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
-	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2440subint[0],
-					s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2442
-static struct s3c_irq_data init_s3c2442base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* WDT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2442subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
-};
-
-void __init s3c2442_init_irq(void)
-{
-	pr_info("S3C2442: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL,
-					0x4a000000);
-	if (IS_ERR(s3c_intc[0])) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
-	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2442subint[0],
-					s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2443
-static struct s3c_irq_data init_s3c2443base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* CFON */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* NAND */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-
-static struct s3c_irq_data init_s3c2443subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-void __init s3c2443_init_irq(void)
-{
-	pr_info("S3C2443: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL,
-					0x4a000000);
-	if (IS_ERR(s3c_intc[0])) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
-	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2443subint[0],
-					s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_OF
-static int s3c24xx_irq_map_of(struct irq_domain *h, unsigned int virq,
-							irq_hw_number_t hw)
-{
-	unsigned int ctrl_num = hw / 32;
-	unsigned int intc_hw = hw % 32;
-	struct s3c_irq_intc *intc = s3c_intc[ctrl_num];
-	struct s3c_irq_intc *parent_intc = intc->parent;
-	struct s3c_irq_data *irq_data = &intc->irqs[intc_hw];
-
-	/* attach controller pointer to irq_data */
-	irq_data->intc = intc;
-	irq_data->offset = intc_hw;
-
-	if (!parent_intc)
-		irq_set_chip_and_handler(virq, &s3c_irq_chip, handle_edge_irq);
-	else
-		irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
-					 handle_edge_irq);
-
-	irq_set_chip_data(virq, irq_data);
-
-	return 0;
-}
-
-/* Translate our of irq notation
- * format: <ctrl_num ctrl_irq parent_irq type>
- */
-static int s3c24xx_irq_xlate_of(struct irq_domain *d, struct device_node *n,
-			const u32 *intspec, unsigned int intsize,
-			irq_hw_number_t *out_hwirq, unsigned int *out_type)
-{
-	struct s3c_irq_intc *intc;
-	struct s3c_irq_intc *parent_intc;
-	struct s3c_irq_data *irq_data;
-	struct s3c_irq_data *parent_irq_data;
-	int irqno;
-
-	if (WARN_ON(intsize < 4))
-		return -EINVAL;
-
-	if (intspec[0] > 2 || !s3c_intc[intspec[0]]) {
-		pr_err("controller number %d invalid\n", intspec[0]);
-		return -EINVAL;
-	}
-	intc = s3c_intc[intspec[0]];
-
-	*out_hwirq = intspec[0] * 32 + intspec[2];
-	*out_type = intspec[3] & IRQ_TYPE_SENSE_MASK;
-
-	parent_intc = intc->parent;
-	if (parent_intc) {
-		irq_data = &intc->irqs[intspec[2]];
-		irq_data->parent_irq = intspec[1];
-		parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
-		parent_irq_data->sub_intc = intc;
-		parent_irq_data->sub_bits |= (1UL << intspec[2]);
-
-		/* parent_intc is always s3c_intc[0], so no offset */
-		irqno = irq_create_mapping(parent_intc->domain, intspec[1]);
-		if (irqno < 0) {
-			pr_err("irq: could not map parent interrupt\n");
-			return irqno;
-		}
-
-		irq_set_chained_handler(irqno, s3c_irq_demux);
-	}
-
-	return 0;
-}
-
-static const struct irq_domain_ops s3c24xx_irq_ops_of = {
-	.map = s3c24xx_irq_map_of,
-	.xlate = s3c24xx_irq_xlate_of,
-};
-
-struct s3c24xx_irq_of_ctrl {
-	char			*name;
-	unsigned long		offset;
-	struct s3c_irq_intc	**handle;
-	struct s3c_irq_intc	**parent;
-	struct irq_domain_ops	*ops;
-};
-
-static int __init s3c_init_intc_of(struct device_node *np,
-			struct device_node *interrupt_parent,
-			struct s3c24xx_irq_of_ctrl *s3c_ctrl, int num_ctrl)
-{
-	struct s3c_irq_intc *intc;
-	struct s3c24xx_irq_of_ctrl *ctrl;
-	struct irq_domain *domain;
-	void __iomem *reg_base;
-	int i;
-
-	reg_base = of_iomap(np, 0);
-	if (!reg_base) {
-		pr_err("irq-s3c24xx: could not map irq registers\n");
-		return -EINVAL;
-	}
-
-	domain = irq_domain_add_linear(np, num_ctrl * 32,
-						     &s3c24xx_irq_ops_of, NULL);
-	if (!domain) {
-		pr_err("irq: could not create irq-domain\n");
-		return -EINVAL;
-	}
-
-	for (i = 0; i < num_ctrl; i++) {
-		ctrl = &s3c_ctrl[i];
-
-		pr_debug("irq: found controller %s\n", ctrl->name);
-
-		intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
-		if (!intc)
-			return -ENOMEM;
-
-		intc->domain = domain;
-		intc->irqs = kcalloc(32, sizeof(struct s3c_irq_data),
-				     GFP_KERNEL);
-		if (!intc->irqs) {
-			kfree(intc);
-			return -ENOMEM;
-		}
-
-		if (ctrl->parent) {
-			intc->reg_pending = reg_base + ctrl->offset;
-			intc->reg_mask = reg_base + ctrl->offset + 0x4;
-
-			if (*(ctrl->parent)) {
-				intc->parent = *(ctrl->parent);
-			} else {
-				pr_warn("irq: parent of %s missing\n",
-					ctrl->name);
-				kfree(intc->irqs);
-				kfree(intc);
-				continue;
-			}
-		} else {
-			intc->reg_pending = reg_base + ctrl->offset;
-			intc->reg_mask = reg_base + ctrl->offset + 0x08;
-			intc->reg_intpnd = reg_base + ctrl->offset + 0x10;
-		}
-
-		s3c24xx_clear_intc(intc);
-		s3c_intc[i] = intc;
-	}
-
-	set_handle_irq(s3c24xx_handle_irq);
-
-	return 0;
-}
-
-static struct s3c24xx_irq_of_ctrl s3c2410_ctrl[] = {
-	{
-		.name = "intc",
-		.offset = 0,
-	}, {
-		.name = "subintc",
-		.offset = 0x18,
-		.parent = &s3c_intc[0],
-	}
-};
-
-static int __init s3c2410_init_intc_of(struct device_node *np,
-			struct device_node *interrupt_parent)
-{
-	return s3c_init_intc_of(np, interrupt_parent,
-				s3c2410_ctrl, ARRAY_SIZE(s3c2410_ctrl));
-}
-IRQCHIP_DECLARE(s3c2410_irq, "samsung,s3c2410-irq", s3c2410_init_intc_of);
-
-static struct s3c24xx_irq_of_ctrl s3c2416_ctrl[] = {
-	{
-		.name = "intc",
-		.offset = 0,
-	}, {
-		.name = "subintc",
-		.offset = 0x18,
-		.parent = &s3c_intc[0],
-	}, {
-		.name = "intc2",
-		.offset = 0x40,
-	}
-};
-
-static int __init s3c2416_init_intc_of(struct device_node *np,
-			struct device_node *interrupt_parent)
-{
-	return s3c_init_intc_of(np, interrupt_parent,
-				s3c2416_ctrl, ARRAY_SIZE(s3c2416_ctrl));
-}
-IRQCHIP_DECLARE(s3c2416_irq, "samsung,s3c2416-irq", s3c2416_init_intc_of);
-#endif
diff --git a/arch/arm/mach-s3c/irq-uart-s3c64xx.h b/arch/arm/mach-s3c/irq-uart-s3c64xx.h
index 78eccdce95a7..e754b0359c8a 100644
--- a/arch/arm/mach-s3c/irq-uart-s3c64xx.h
+++ b/arch/arm/mach-s3c/irq-uart-s3c64xx.h
@@ -12,5 +12,3 @@ struct s3c_uart_irq {
 	unsigned int	 parent_irq;
 };
 
-extern void s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs);
-
diff --git a/arch/arm/mach-s3c/irqs-s3c24xx.h b/arch/arm/mach-s3c/irqs-s3c24xx.h
deleted file mode 100644
index fecbf7e440c6..000000000000
--- a/arch/arm/mach-s3c/irqs-s3c24xx.h
+++ /dev/null
@@ -1,219 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003-2005 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- */
-
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- */
-
-#define S3C2410_CPUIRQ_OFFSET	 (16)
-
-#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
-
-/* main cpu interrupts */
-#define IRQ_EINT0      S3C2410_IRQ(0)	    /* 16 */
-#define IRQ_EINT1      S3C2410_IRQ(1)
-#define IRQ_EINT2      S3C2410_IRQ(2)
-#define IRQ_EINT3      S3C2410_IRQ(3)
-#define IRQ_EINT4t7    S3C2410_IRQ(4)	    /* 20 */
-#define IRQ_EINT8t23   S3C2410_IRQ(5)
-#define IRQ_RESERVED6  S3C2410_IRQ(6)	    /* for s3c2410 */
-#define IRQ_CAM        S3C2410_IRQ(6)	    /* for s3c2440,s3c2443 */
-#define IRQ_BATT_FLT   S3C2410_IRQ(7)
-#define IRQ_TICK       S3C2410_IRQ(8)	    /* 24 */
-#define IRQ_WDT	       S3C2410_IRQ(9)	    /* WDT/AC97 for s3c2443 */
-#define IRQ_TIMER0     S3C2410_IRQ(10)
-#define IRQ_TIMER1     S3C2410_IRQ(11)
-#define IRQ_TIMER2     S3C2410_IRQ(12)
-#define IRQ_TIMER3     S3C2410_IRQ(13)
-#define IRQ_TIMER4     S3C2410_IRQ(14)
-#define IRQ_UART2      S3C2410_IRQ(15)
-#define IRQ_LCD	       S3C2410_IRQ(16)	    /* 32 */
-#define IRQ_DMA0       S3C2410_IRQ(17)	    /* IRQ_DMA for s3c2443 */
-#define IRQ_DMA1       S3C2410_IRQ(18)
-#define IRQ_DMA2       S3C2410_IRQ(19)
-#define IRQ_DMA3       S3C2410_IRQ(20)
-#define IRQ_SDI	       S3C2410_IRQ(21)
-#define IRQ_SPI0       S3C2410_IRQ(22)
-#define IRQ_UART1      S3C2410_IRQ(23)
-#define IRQ_RESERVED24 S3C2410_IRQ(24)	    /* 40 */
-#define IRQ_NFCON      S3C2410_IRQ(24)	    /* for s3c2440 */
-#define IRQ_USBD       S3C2410_IRQ(25)
-#define IRQ_USBH       S3C2410_IRQ(26)
-#define IRQ_IIC	       S3C2410_IRQ(27)
-#define IRQ_UART0      S3C2410_IRQ(28)	    /* 44 */
-#define IRQ_SPI1       S3C2410_IRQ(29)
-#define IRQ_RTC	       S3C2410_IRQ(30)
-#define IRQ_ADCPARENT  S3C2410_IRQ(31)
-
-/* interrupts generated from the external interrupts sources */
-#define IRQ_EINT0_2412 S3C2410_IRQ(32)
-#define IRQ_EINT1_2412 S3C2410_IRQ(33)
-#define IRQ_EINT2_2412 S3C2410_IRQ(34)
-#define IRQ_EINT3_2412 S3C2410_IRQ(35)
-#define IRQ_EINT4      S3C2410_IRQ(36)	   /* 52 */
-#define IRQ_EINT5      S3C2410_IRQ(37)
-#define IRQ_EINT6      S3C2410_IRQ(38)
-#define IRQ_EINT7      S3C2410_IRQ(39)
-#define IRQ_EINT8      S3C2410_IRQ(40)
-#define IRQ_EINT9      S3C2410_IRQ(41)
-#define IRQ_EINT10     S3C2410_IRQ(42)
-#define IRQ_EINT11     S3C2410_IRQ(43)
-#define IRQ_EINT12     S3C2410_IRQ(44)
-#define IRQ_EINT13     S3C2410_IRQ(45)
-#define IRQ_EINT14     S3C2410_IRQ(46)
-#define IRQ_EINT15     S3C2410_IRQ(47)
-#define IRQ_EINT16     S3C2410_IRQ(48)
-#define IRQ_EINT17     S3C2410_IRQ(49)
-#define IRQ_EINT18     S3C2410_IRQ(50)
-#define IRQ_EINT19     S3C2410_IRQ(51)
-#define IRQ_EINT20     S3C2410_IRQ(52)	   /* 68 */
-#define IRQ_EINT21     S3C2410_IRQ(53)
-#define IRQ_EINT22     S3C2410_IRQ(54)
-#define IRQ_EINT23     S3C2410_IRQ(55)
-
-#define IRQ_EINT_BIT(x)	((x) - IRQ_EINT4 + 4)
-#define IRQ_EINT(x)    (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
-
-#define IRQ_LCD_FIFO   S3C2410_IRQ(56)
-#define IRQ_LCD_FRAME  S3C2410_IRQ(57)
-
-/* IRQs for the interal UARTs, and ADC
- * these need to be ordered in number of appearance in the
- * SUBSRC mask register
-*/
-
-#define S3C2410_IRQSUB(x)	S3C2410_IRQ((x)+58)
-
-#define IRQ_S3CUART_RX0		S3C2410_IRQSUB(0)	/* 74 */
-#define IRQ_S3CUART_TX0		S3C2410_IRQSUB(1)
-#define IRQ_S3CUART_ERR0	S3C2410_IRQSUB(2)
-
-#define IRQ_S3CUART_RX1		S3C2410_IRQSUB(3)	/* 77 */
-#define IRQ_S3CUART_TX1		S3C2410_IRQSUB(4)
-#define IRQ_S3CUART_ERR1	S3C2410_IRQSUB(5)
-
-#define IRQ_S3CUART_RX2		S3C2410_IRQSUB(6)	/* 80 */
-#define IRQ_S3CUART_TX2		S3C2410_IRQSUB(7)
-#define IRQ_S3CUART_ERR2	S3C2410_IRQSUB(8)
-
-#define IRQ_TC			S3C2410_IRQSUB(9)
-#define IRQ_ADC			S3C2410_IRQSUB(10)
-
-#define NR_IRQS_S3C2410		(S3C2410_IRQSUB(10) + 1)
-
-/* extra irqs for s3c2412 */
-
-#define IRQ_S3C2412_CFSDI	S3C2410_IRQ(21)
-
-#define IRQ_S3C2412_SDI		S3C2410_IRQSUB(13)
-#define IRQ_S3C2412_CF		S3C2410_IRQSUB(14)
-
-#define NR_IRQS_S3C2412		(S3C2410_IRQSUB(14) + 1)
-
-#define IRQ_S3C2416_EINT8t15	S3C2410_IRQ(5)
-#define IRQ_S3C2416_DMA		S3C2410_IRQ(17)
-#define IRQ_S3C2416_UART3	S3C2410_IRQ(18)
-#define IRQ_S3C2416_SDI1	S3C2410_IRQ(20)
-#define IRQ_S3C2416_SDI0	S3C2410_IRQ(21)
-
-#define IRQ_S3C2416_LCD2	S3C2410_IRQSUB(15)
-#define IRQ_S3C2416_LCD3	S3C2410_IRQSUB(16)
-#define IRQ_S3C2416_LCD4	S3C2410_IRQSUB(17)
-#define IRQ_S3C2416_DMA0	S3C2410_IRQSUB(18)
-#define IRQ_S3C2416_DMA1	S3C2410_IRQSUB(19)
-#define IRQ_S3C2416_DMA2	S3C2410_IRQSUB(20)
-#define IRQ_S3C2416_DMA3	S3C2410_IRQSUB(21)
-#define IRQ_S3C2416_DMA4	S3C2410_IRQSUB(22)
-#define IRQ_S3C2416_DMA5	S3C2410_IRQSUB(23)
-#define IRQ_S32416_WDT		S3C2410_IRQSUB(27)
-#define IRQ_S32416_AC97		S3C2410_IRQSUB(28)
-
-/* second interrupt-register of s3c2416/s3c2450 */
-
-#define S3C2416_IRQ(x)		S3C2410_IRQ((x) + 58 + 29)
-#define IRQ_S3C2416_2D		S3C2416_IRQ(0)
-#define IRQ_S3C2416_IIC1	S3C2416_IRQ(1)
-#define IRQ_S3C2416_RESERVED2	S3C2416_IRQ(2)
-#define IRQ_S3C2416_RESERVED3	S3C2416_IRQ(3)
-#define IRQ_S3C2416_PCM0	S3C2416_IRQ(4)
-#define IRQ_S3C2416_PCM1	S3C2416_IRQ(5)
-#define IRQ_S3C2416_I2S0	S3C2416_IRQ(6)
-#define IRQ_S3C2416_I2S1	S3C2416_IRQ(7)
-
-#define NR_IRQS_S3C2416		(S3C2416_IRQ(7) + 1)
-
-/* extra irqs for s3c2440/s3c2442 */
-
-#define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)	/* S3C2443 too */
-#define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)	/* S3C2443 too */
-
-#define NR_IRQS_S3C2442		(S3C2410_IRQSUB(12) + 1)
-
-#define IRQ_S3C2440_WDT		S3C2410_IRQSUB(13)
-#define IRQ_S3C2440_AC97	S3C2410_IRQSUB(14)
-
-#define NR_IRQS_S3C2440		(S3C2410_IRQSUB(14) + 1)
-
-/* irqs for s3c2443 */
-
-#define IRQ_S3C2443_DMA		S3C2410_IRQ(17)		/* IRQ_DMA1 */
-#define IRQ_S3C2443_UART3	S3C2410_IRQ(18)		/* IRQ_DMA2 */
-#define IRQ_S3C2443_CFCON	S3C2410_IRQ(19)		/* IRQ_DMA3 */
-#define IRQ_S3C2443_HSMMC	S3C2410_IRQ(20)		/* IRQ_SDI */
-#define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
-
-#define IRQ_S3C2416_HSMMC0	S3C2410_IRQ(21)		/* S3C2416/S3C2450 */
-
-#define IRQ_HSMMC0		IRQ_S3C2416_HSMMC0
-#define IRQ_HSMMC1		IRQ_S3C2443_HSMMC
-
-#define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
-#define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
-#define IRQ_S3C2443_LCD3	S3C2410_IRQSUB(16)
-#define IRQ_S3C2443_LCD4	S3C2410_IRQSUB(17)
-
-#define IRQ_S3C2443_DMA0	S3C2410_IRQSUB(18)
-#define IRQ_S3C2443_DMA1	S3C2410_IRQSUB(19)
-#define IRQ_S3C2443_DMA2	S3C2410_IRQSUB(20)
-#define IRQ_S3C2443_DMA3	S3C2410_IRQSUB(21)
-#define IRQ_S3C2443_DMA4	S3C2410_IRQSUB(22)
-#define IRQ_S3C2443_DMA5	S3C2410_IRQSUB(23)
-
-/* UART3 */
-#define IRQ_S3C2443_RX3		S3C2410_IRQSUB(24)
-#define IRQ_S3C2443_TX3		S3C2410_IRQSUB(25)
-#define IRQ_S3C2443_ERR3	S3C2410_IRQSUB(26)
-
-#define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
-#define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
-
-#define NR_IRQS_S3C2443		(S3C2410_IRQSUB(28) + 1)
-
-/* compatibility define. */
-#define IRQ_UART3		IRQ_S3C2443_UART3
-#define IRQ_S3CUART_RX3		IRQ_S3C2443_RX3
-#define IRQ_S3CUART_TX3		IRQ_S3C2443_TX3
-#define IRQ_S3CUART_ERR3	IRQ_S3C2443_ERR3
-
-#define IRQ_LCD_VSYNC		IRQ_S3C2443_LCD3
-#define IRQ_LCD_SYSTEM		IRQ_S3C2443_LCD2
-
-#ifdef CONFIG_CPU_S3C2440
-#define IRQ_S3C244X_AC97 IRQ_S3C2440_AC97
-#else
-#define IRQ_S3C244X_AC97 IRQ_S3C2443_AC97
-#endif
-
-/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
-#define FIQ_START		IRQ_EINT0
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c/irqs.h b/arch/arm/mach-s3c/irqs.h
index 0bff1c1c8eb0..3ff0e0963080 100644
--- a/arch/arm/mach-s3c/irqs.h
+++ b/arch/arm/mach-s3c/irqs.h
@@ -1,9 +1,2 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "irqs-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
 #include "irqs-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/mach-amlm5900.c b/arch/arm/mach-s3c/mach-amlm5900.c
deleted file mode 100644
index f85e5885e9b4..000000000000
--- a/arch/arm/mach-s3c/mach-amlm5900.c
+++ /dev/null
@@ -1,248 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2006 American Microsystems Limited
-//	David Anders <danders@amltd.com>
-//
-// @History:
-// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
-// Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/proc_fs.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <linux/platform_data/fb-s3c2410.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "devs.h"
-#include "cpu.h"
-#include "gpio-cfg.h"
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/physmap.h>
-
-#include "s3c24xx.h"
-
-static struct resource amlm5900_nor_resource =
-			DEFINE_RES_MEM(0x00000000, SZ_16M);
-
-static struct mtd_partition amlm5900_mtd_partitions[] = {
-	{
-		.name		= "System",
-		.size		= 0x240000,
-		.offset		= 0,
-		.mask_flags 	= MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name		= "Kernel",
-		.size		= 0x100000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "Ramdisk",
-		.size		= 0x300000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "JFFS2",
-		.size		= 0x9A0000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "Settings",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data amlm5900_flash_data = {
-	.width		= 2,
-	.parts		= amlm5900_mtd_partitions,
-	.nr_parts	= ARRAY_SIZE(amlm5900_mtd_partitions),
-};
-
-static struct platform_device amlm5900_device_nor = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-			.platform_data = &amlm5900_flash_data,
-		},
-	.num_resources	= 1,
-	.resource	= &amlm5900_nor_resource,
-};
-
-static struct map_desc amlm5900_iodesc[] __initdata = {
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg amlm5900_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-static struct gpiod_lookup_table amlm5900_mmc_gpio_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device *amlm5900_devices[] __initdata = {
-#ifdef CONFIG_FB_S3C2410
-	&s3c_device_lcd,
-#endif
-	&s3c_device_adc,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_ohci,
- 	&s3c_device_rtc,
-	&s3c_device_usbgadget,
-        &s3c_device_sdi,
-	&amlm5900_device_nor,
-};
-
-static void __init amlm5900_map_io(void)
-{
-	s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
-	s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init amlm5900_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-#ifdef CONFIG_FB_S3C2410
-static struct s3c2410fb_display __initdata amlm5900_lcd_info = {
-	.width		= 160,
-	.height		= 160,
-
-	.type		= S3C2410_LCDCON1_STN4,
-
-	.pixclock	= 680000, /* HCLK = 100MHz */
-	.xres		= 160,
-	.yres		= 160,
-	.bpp		= 4,
-	.left_margin	= 1 << (4 + 3),
-	.right_margin	= 8 << 3,
-	.hsync_len	= 48,
-	.upper_margin	= 0,
-	.lower_margin	= 0,
-
-	.lcdcon5	= 0x00000001,
-};
-
-static struct s3c2410fb_mach_info __initdata amlm5900_fb_info = {
-
-	.displays = &amlm5900_lcd_info,
-	.num_displays = 1,
-	.default_display = 0,
-
-	.gpccon =	0xaaaaaaaa,
-	.gpccon_mask =	0xffffffff,
-	.gpccon_reg =	S3C2410_GPCCON,
-	.gpcup =	0x0000ffff,
-	.gpcup_mask =	0xffffffff,
-	.gpcup_reg =	S3C2410_GPCUP,
-
-	.gpdcon =	0xaaaaaaaa,
-	.gpdcon_mask =	0xffffffff,
-	.gpdcon_reg =	S3C2410_GPDCON,
-	.gpdup =	0x0000ffff,
-	.gpdup_mask =	0xffffffff,
-	.gpdup_reg =	S3C2410_GPDUP,
-};
-#endif
-
-static irqreturn_t
-amlm5900_wake_interrupt(int irq, void *ignored)
-{
-	return IRQ_HANDLED;
-}
-
-static void amlm5900_init_pm(void)
-{
-	int ret = 0;
-
-	ret = request_irq(IRQ_EINT9, &amlm5900_wake_interrupt,
-				IRQF_TRIGGER_RISING | IRQF_SHARED,
-				"amlm5900_wakeup", &amlm5900_wake_interrupt);
-	if (ret != 0) {
-		printk(KERN_ERR "AML-M5900: no wakeup irq, %d?\n", ret);
-	} else {
-		enable_irq_wake(IRQ_EINT9);
-		/* configure the suspend/resume status pin */
-		s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
-		s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_UP);
-	}
-}
-static void __init amlm5900_init(void)
-{
-	amlm5900_init_pm();
-#ifdef CONFIG_FB_S3C2410
-	s3c24xx_fb_set_platdata(&amlm5900_fb_info);
-#endif
-	s3c_i2c0_set_platdata(NULL);
-	gpiod_add_lookup_table(&amlm5900_mmc_gpio_table);
-	platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
-}
-
-MACHINE_START(AML_M5900, "AML_M5900")
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.map_io		= amlm5900_map_io,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.init_irq	= s3c2410_init_irq,
-	.init_machine	= amlm5900_init,
-	.init_time	= amlm5900_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-anubis.c b/arch/arm/mach-s3c/mach-anubis.c
deleted file mode 100644
index 4536f3e66e27..000000000000
--- a/arch/arm/mach-s3c/mach-anubis.c
+++ /dev/null
@@ -1,422 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2003-2009 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/sm501.h>
-#include <linux/sm501-regs.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-
-#include <net/ax88796.h>
-
-#include "devs.h"
-#include "cpu.h"
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-
-#include "anubis.h"
-#include "s3c24xx.h"
-#include "simtec.h"
-
-#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
-
-static struct map_desc anubis_iodesc[] __initdata = {
-  /* ISA IO areas */
-
-  {
-	.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-	.pfn		= __phys_to_pfn(0x0),
-	.length		= SZ_4M,
-	.type		= MT_DEVICE,
-  },
-
-  /* we could possibly compress the next set down into a set of smaller tables
-   * pagetables, but that would mean using an L2 section, and it still means
-   * we cannot actually feed the same register to an LDR due to 16K spacing
-   */
-
-  /* CPLD control registers */
-
-  {
-	.virtual	= (u32)ANUBIS_VA_CTRL1,
-	.pfn		= __phys_to_pfn(ANUBIS_PA_CTRL1),
-	.length		= SZ_4K,
-	.type		= MT_DEVICE,
-  }, {
-	.virtual	= (u32)ANUBIS_VA_IDREG,
-	.pfn		= __phys_to_pfn(ANUBIS_PA_IDREG),
-	.length		= SZ_4K,
-	.type		= MT_DEVICE,
-  },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-	[1] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-};
-
-/* NAND Flash on Anubis board */
-
-static int external_map[]   = { 2 };
-static int chip0_map[]      = { 0 };
-static int chip1_map[]      = { 1 };
-
-static struct mtd_partition __initdata anubis_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_16K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_16K,
-		.offset	= SZ_16K,
-	},
-	[2] = {
-		.name	= "user1",
-		.offset	= SZ_4M,
-		.size	= SZ_32M - SZ_4M,
-	},
-	[3] = {
-		.name	= "user2",
-		.offset	= SZ_32M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_128K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_128K,
-		.offset	= SZ_128K,
-	},
-	[2] = {
-		.name	= "user1",
-		.offset	= SZ_4M,
-		.size	= SZ_32M - SZ_4M,
-	},
-	[3] = {
-		.name	= "user2",
-		.offset	= SZ_32M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-/* the Anubis has 3 selectable slots for nand-flash, the two
- * on-board chip areas, as well as the external slot.
- *
- * Note, there is no current hot-plug support for the External
- * socket.
-*/
-
-static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
-	[1] = {
-		.name		= "External",
-		.nr_chips	= 1,
-		.nr_map		= external_map,
-		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
-		.partitions	= anubis_default_nand_part,
-	},
-	[0] = {
-		.name		= "chip0",
-		.nr_chips	= 1,
-		.nr_map		= chip0_map,
-		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
-		.partitions	= anubis_default_nand_part,
-	},
-	[2] = {
-		.name		= "chip1",
-		.nr_chips	= 1,
-		.nr_map		= chip1_map,
-		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
-		.partitions	= anubis_default_nand_part,
-	},
-};
-
-static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
-{
-	unsigned int tmp;
-
-	slot = set->nr_map[slot] & 3;
-
-	pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
-		 slot, set, set->nr_map);
-
-	tmp = __raw_readb(ANUBIS_VA_CTRL1);
-	tmp &= ~ANUBIS_CTRL1_NANDSEL;
-	tmp |= slot;
-
-	pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
-
-	__raw_writeb(tmp, ANUBIS_VA_CTRL1);
-}
-
-static struct s3c2410_platform_nand __initdata anubis_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(anubis_nand_sets),
-	.sets		= anubis_nand_sets,
-	.select_chip	= anubis_nand_select,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-/* IDE channels */
-
-static struct pata_platform_info anubis_ide_platdata = {
-	.ioport_shift	= 5,
-};
-
-static struct resource anubis_ide0_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32),
-	[2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32),
-	[3] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
-};
-
-static struct platform_device anubis_device_ide0 = {
-	.name		= "pata_platform",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(anubis_ide0_resource),
-	.resource	= anubis_ide0_resource,
-	.dev	= {
-		.platform_data = &anubis_ide_platdata,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-static struct resource anubis_ide1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32),
-	[1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32),
-	[2] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
-};
-
-static struct platform_device anubis_device_ide1 = {
-	.name		= "pata_platform",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(anubis_ide1_resource),
-	.resource	= anubis_ide1_resource,
-	.dev	= {
-		.platform_data = &anubis_ide_platdata,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-/* Asix AX88796 10/100 ethernet controller */
-
-static struct ax_plat_data anubis_asix_platdata = {
-	.flags		= AXFLG_MAC_FROMDEV,
-	.wordlength	= 2,
-	.dcr_val	= 0x48,
-	.rcr_val	= 0x40,
-};
-
-static struct resource anubis_asix_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20),
-	[1] = DEFINE_RES_IRQ(ANUBIS_IRQ_ASIX),
-};
-
-static struct platform_device anubis_device_asix = {
-	.name		= "ax88796",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(anubis_asix_resource),
-	.resource	= anubis_asix_resource,
-	.dev		= {
-		.platform_data = &anubis_asix_platdata,
-	}
-};
-
-/* SM501 */
-
-static struct resource anubis_sm501_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS2, SZ_8M),
-	[1] = DEFINE_RES_MEM(S3C2410_CS2 + SZ_64M - SZ_2M, SZ_2M),
-	[2] = DEFINE_RES_IRQ(IRQ_EINT0),
-};
-
-static struct sm501_initdata anubis_sm501_initdata = {
-	.gpio_high	= {
-		.set	= 0x3F000000,		/* 24bit panel */
-		.mask	= 0x0,
-	},
-	.misc_timing	= {
-		.set	= 0x010100,		/* SDRAM timing */
-		.mask	= 0x1F1F00,
-	},
-	.misc_control	= {
-		.set	= SM501_MISC_PNL_24BIT,
-		.mask	= 0,
-	},
-
-	.devices	= SM501_USE_GPIO,
-
-	/* set the SDRAM and bus clocks */
-	.mclk		= 72 * MHZ,
-	.m1xclk		= 144 * MHZ,
-};
-
-static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
-	[0] = {
-		.bus_num	= 1,
-		.pin_scl	= 44,
-		.pin_sda	= 45,
-	},
-	[1] = {
-		.bus_num	= 2,
-		.pin_scl	= 40,
-		.pin_sda	= 41,
-	},
-};
-
-static struct sm501_platdata anubis_sm501_platdata = {
-	.init		= &anubis_sm501_initdata,
-	.gpio_base	= -1,
-	.gpio_i2c	= anubis_sm501_gpio_i2c,
-	.gpio_i2c_nr	= ARRAY_SIZE(anubis_sm501_gpio_i2c),
-};
-
-static struct platform_device anubis_device_sm501 = {
-	.name		= "sm501",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(anubis_sm501_resource),
-	.resource	= anubis_sm501_resource,
-	.dev		= {
-		.platform_data = &anubis_sm501_platdata,
-	},
-};
-
-/* Standard Anubis devices */
-
-static struct platform_device *anubis_devices[] __initdata = {
-	&s3c2410_device_dclk,
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_adc,
-	&s3c_device_i2c0,
- 	&s3c_device_rtc,
-	&s3c_device_nand,
-	&anubis_device_ide0,
-	&anubis_device_ide1,
-	&anubis_device_asix,
-	&anubis_device_sm501,
-};
-
-/* I2C devices. */
-
-static struct i2c_board_info anubis_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("tps65011", 0x48),
-		.irq	= IRQ_EINT20,
-	}
-};
-
-/* Audio setup */
-static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
-	.have_mic	= 1,
-	.have_lout	= 1,
-	.output_cdclk	= 1,
-	.use_mpllin	= 1,
-	.amp_gpio	= S3C2410_GPB(2),
-	.amp_gain[0]	= S3C2410_GPD(10),
-	.amp_gain[1]	= S3C2410_GPD(11),
-};
-
-static void __init anubis_map_io(void)
-{
-	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
-	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-
-	/* check for the newer revision boards with large page nand */
-
-	if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
-		printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
-		       __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
-		anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
-		anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
-	} else {
-		/* ensure that the GPIO is setup */
-		gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
-		gpio_free(S3C2410_GPA(0));
-	}
-}
-
-static void __init anubis_init_time(void)
-{
-	s3c2440_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init anubis_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	s3c_nand_set_platdata(&anubis_nand_info);
-	simtec_audio_add(NULL, false, &anubis_audio);
-
-	platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
-
-	i2c_register_board_info(0, anubis_i2c_devs,
-				ARRAY_SIZE(anubis_i2c_devs));
-}
-
-
-MACHINE_START(ANUBIS, "Simtec-Anubis")
-	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2440,
-	.map_io		= anubis_map_io,
-	.init_machine	= anubis_init,
-	.init_irq	= s3c2440_init_irq,
-	.init_time	= anubis_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-anw6410.c b/arch/arm/mach-s3c/mach-anw6410.c
deleted file mode 100644
index b67eae43e04f..000000000000
--- a/arch/arm/mach-s3c/mach-anw6410.c
+++ /dev/null
@@ -1,230 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//	http://armlinux.simtec.co.uk/
-// Copyright 2009 Kwangwoo Lee
-//	Kwangwoo Lee <kwangwoo.lee@gmail.com>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/dm9000.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "map.h"
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "fb.h"
-
-#include "devs.h"
-#include "cpu.h"
-#include "irqs.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "s3c64xx.h"
-#include "regs-modem-s3c64xx.h"
-
-/* DM9000 */
-#define ANW6410_PA_DM9000	(0x18000000)
-
-/* A hardware buffer to control external devices is mapped at 0x30000000.
- * It can not be read. So current status must be kept in anw6410_extdev_status.
- */
-#define ANW6410_VA_EXTDEV	S3C_ADDR(0x02000000)
-#define ANW6410_PA_EXTDEV	(0x30000000)
-
-#define ANW6410_EN_DM9000	(1<<11)
-#define ANW6410_EN_LCD		(1<<14)
-
-static __u32 anw6410_extdev_status;
-
-static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-};
-
-/* framebuffer and LCD setup. */
-static void __init anw6410_lcd_mode_set(void)
-{
-	u32 tmp;
-
-	/* set the LCD type */
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the LCD bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-/* GPF1 = LCD panel power
- * GPF4 = LCD backlight control
- */
-static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power) {
-		anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
-		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
-
-		gpio_direction_output(S3C64XX_GPF(1), 1);
-		gpio_direction_output(S3C64XX_GPF(4), 1);
-	} else {
-		anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
-		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
-
-		gpio_direction_output(S3C64XX_GPF(1), 0);
-		gpio_direction_output(S3C64XX_GPF(4), 0);
-	}
-}
-
-static struct plat_lcd_data anw6410_lcd_power_data = {
-	.set_power	= anw6410_lcd_power_set,
-};
-
-static struct platform_device anw6410_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &anw6410_lcd_power_data,
-};
-
-static struct s3c_fb_pd_win anw6410_fb_win0 = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct fb_videomode anw6410_lcd_timing = {
-	.left_margin	= 8,
-	.right_margin	= 13,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-	.hsync_len	= 3,
-	.vsync_len	= 1,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.vtiming	= &anw6410_lcd_timing,
-	.win[0]		= &anw6410_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-static void __init anw6410_dm9000_enable(void)
-{
-	anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
-	__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
-}
-
-static struct resource anw6410_dm9000_resource[] = {
-	[0] = DEFINE_RES_MEM(ANW6410_PA_DM9000, 4),
-	[1] = DEFINE_RES_MEM(ANW6410_PA_DM9000 + 4, 501),
-	[2] = DEFINE_RES_NAMED(IRQ_EINT(15), 1, NULL, IORESOURCE_IRQ \
-					| IRQF_TRIGGER_HIGH),
-};
-
-static struct dm9000_plat_data anw6410_dm9000_pdata = {
-	.flags	  = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-	/* dev_addr can be set to provide hwaddr. */
-};
-
-static struct platform_device anw6410_device_eth = {
-	.name	= "dm9000",
-	.id	= -1,
-	.num_resources	= ARRAY_SIZE(anw6410_dm9000_resource),
-	.resource	= anw6410_dm9000_resource,
-	.dev	= {
-		.platform_data  = &anw6410_dm9000_pdata,
-	},
-};
-
-static struct map_desc anw6410_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)ANW6410_VA_EXTDEV,
-		.pfn		= __phys_to_pfn(ANW6410_PA_EXTDEV),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct platform_device *anw6410_devices[] __initdata = {
-	&s3c_device_fb,
-	&anw6410_lcd_powerdev,
-	&anw6410_device_eth,
-};
-
-static void __init anw6410_map_io(void)
-{
-	s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
-	s3c64xx_set_xtal_freq(12000000);
-	s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
-	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
-
-	anw6410_lcd_mode_set();
-}
-
-static void __init anw6410_machine_init(void)
-{
-	s3c_fb_set_platdata(&anw6410_lcd_pdata);
-
-	gpio_request(S3C64XX_GPF(1), "panel power");
-	gpio_request(S3C64XX_GPF(4), "LCD backlight");
-
-	anw6410_dm9000_enable();
-
-	platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
-}
-
-MACHINE_START(ANW6410, "A&W6410")
-	/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= anw6410_map_io,
-	.init_machine	= anw6410_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-at2440evb.c b/arch/arm/mach-s3c/mach-at2440evb.c
deleted file mode 100644
index 743403d873e0..000000000000
--- a/arch/arm/mach-s3c/mach-at2440evb.c
+++ /dev/null
@@ -1,233 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
-//      Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
-//      and modifications by SBZ <sbz@spgui.org> and
-//      Weibing <http://weibing.blogbus.com>
-//
-// For product information, visit http://www.arm.com/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio/machine.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/dm9000.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-
-#include "devs.h"
-#include "cpu.h"
-#include <linux/platform_data/mmc-s3cmci.h>
-
-#include "s3c24xx.h"
-
-static struct map_desc at2440evb_iodesc[] __initdata = {
-	/* Nothing here */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-};
-
-/* NAND Flash on AT2440EVB board */
-
-static struct mtd_partition __initdata at2440evb_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_256K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "Kernel",
-		.size	= SZ_2M,
-		.offset	= SZ_256K,
-	},
-	[2] = {
-		.name	= "Root",
-		.offset	= SZ_256K + SZ_2M,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(at2440evb_default_nand_part),
-		.partitions	= at2440evb_default_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(at2440evb_nand_sets),
-	.sets		= at2440evb_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource at2440evb_dm9k_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS3, 4),
-	[1] = DEFINE_RES_MEM(S3C2410_CS3 + 4, 4),
-	[2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ \
-					| IORESOURCE_IRQ_HIGHEDGE),
-};
-
-static struct dm9000_plat_data at2440evb_dm9k_pdata = {
-	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device at2440evb_device_eth = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(at2440evb_dm9k_resource),
-	.resource	= at2440evb_dm9k_resource,
-	.dev		= {
-		.platform_data	= &at2440evb_dm9k_pdata,
-	},
-};
-
-static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
-	.set_power	= s3c24xx_mci_def_set_power,
-};
-
-static struct gpiod_lookup_table at2440evb_mci_gpio_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* Card detect S3C2410_GPG(10) */
-		GPIO_LOOKUP("GPIOG", 10, "cd", GPIO_ACTIVE_LOW),
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-
-/* 7" LCD panel */
-
-static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
-
-	.lcdcon5	= S3C2410_LCDCON5_FRM565 |
-			  S3C2410_LCDCON5_INVVLINE |
-			  S3C2410_LCDCON5_INVVFRAME |
-			  S3C2410_LCDCON5_PWREN |
-			  S3C2410_LCDCON5_HWSWP,
-
-	.type		= S3C2410_LCDCON1_TFT,
-
-	.width		= 800,
-	.height		= 480,
-
-	.pixclock	= 33333, /* HCLK 60 MHz, divisor 2 */
-	.xres		= 800,
-	.yres		= 480,
-	.bpp		= 16,
-	.left_margin	= 88,
-	.right_margin	= 40,
-	.hsync_len	= 128,
-	.upper_margin	= 32,
-	.lower_margin	= 11,
-	.vsync_len	= 2,
-};
-
-static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
-	.displays	= &at2440evb_lcd_cfg,
-	.num_displays	= 1,
-	.default_display = 0,
-};
-
-static struct platform_device *at2440evb_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_adc,
-	&s3c_device_i2c0,
-	&s3c_device_rtc,
-	&s3c_device_nand,
-	&s3c_device_sdi,
-	&s3c_device_lcd,
-	&at2440evb_device_eth,
-};
-
-static void __init at2440evb_map_io(void)
-{
-	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
-	s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init at2440evb_init_time(void)
-{
-	s3c2440_init_clocks(16934400);
-	s3c24xx_timer_init();
-}
-
-static void __init at2440evb_init(void)
-{
-	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
-	gpiod_add_lookup_table(&at2440evb_mci_gpio_table);
-	s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
-	s3c_nand_set_platdata(&at2440evb_nand_info);
-	s3c_i2c0_set_platdata(NULL);
-
-	platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
-}
-
-
-MACHINE_START(AT2440EVB, "AT2440EVB")
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2440,
-	.map_io		= at2440evb_map_io,
-	.init_machine	= at2440evb_init,
-	.init_irq	= s3c2440_init_irq,
-	.init_time	= at2440evb_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-bast.c b/arch/arm/mach-s3c/mach-bast.c
deleted file mode 100644
index a33ceab81e09..000000000000
--- a/arch/arm/mach-s3c/mach-bast.c
+++ /dev/null
@@ -1,583 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2003-2008 Simtec Electronics
-//   Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.simtec.co.uk/products/EB2410ITX/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/dm9000.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/serial_8250.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-#include <linux/platform_data/hwmon-s3c.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-
-#include <net/ax88796.h>
-
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "cpu.h"
-#include <linux/soc/samsung/s3c-cpu-freq.h>
-#include "devs.h"
-#include "gpio-cfg.h"
-
-#include "bast.h"
-#include "s3c24xx.h"
-#include "simtec.h"
-
-#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
-
-/* macros for virtual address mods for the io space entries */
-#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
-#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
-#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
-#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)
-
-/* macros to modify the physical addresses for io space */
-
-#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
-#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
-#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
-#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
-
-static struct map_desc bast_iodesc[] __initdata = {
-  /* ISA IO areas */
-  {
-	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-	  .pfn		= PA_CS2(BAST_PA_ISAIO),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
-  },
-  /* bast CPLD control registers, and external interrupt controls */
-  {
-	  .virtual	= (u32)BAST_VA_CTRL1,
-	  .pfn		= __phys_to_pfn(BAST_PA_CTRL1),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)BAST_VA_CTRL2,
-	  .pfn		= __phys_to_pfn(BAST_PA_CTRL2),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)BAST_VA_CTRL3,
-	  .pfn		= __phys_to_pfn(BAST_PA_CTRL3),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)BAST_VA_CTRL4,
-	  .pfn		= __phys_to_pfn(BAST_PA_CTRL4),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  },
-  /* PC104 IRQ mux */
-  {
-	  .virtual	= (u32)BAST_VA_PC104_IRQREQ,
-	  .pfn		= __phys_to_pfn(BAST_PA_PC104_IRQREQ),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)BAST_VA_PC104_IRQRAW,
-	  .pfn		= __phys_to_pfn(BAST_PA_PC104_IRQRAW),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)BAST_VA_PC104_IRQMASK,
-	  .pfn		= __phys_to_pfn(BAST_PA_PC104_IRQMASK),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  },
-
-  /* peripheral space... one for each of fast/slow/byte/16bit */
-  /* note, ide is only decoded in word space, even though some registers
-   * are only 8bit */
-
-  /* slow, byte */
-  { VA_C2(BAST_VA_ISAIO),   PA_CS2(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
-  { VA_C2(BAST_VA_ISAMEM),  PA_CS2(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-
-  /* slow, word */
-  { VA_C3(BAST_VA_ISAIO),   PA_CS3(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
-  { VA_C3(BAST_VA_ISAMEM),  PA_CS3(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-
-  /* fast, byte */
-  { VA_C4(BAST_VA_ISAIO),   PA_CS4(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
-  { VA_C4(BAST_VA_ISAMEM),  PA_CS4(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-
-  /* fast, word */
-  { VA_C5(BAST_VA_ISAIO),   PA_CS5(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
-  { VA_C5(BAST_VA_ISAMEM),  PA_CS5(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	/* port 2 is not actually used */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* NAND Flash on BAST board */
-
-#ifdef CONFIG_PM
-static int bast_pm_suspend(void)
-{
-	/* ensure that an nRESET is not generated on resume. */
-	gpio_direction_output(S3C2410_GPA(21), 1);
-	return 0;
-}
-
-static void bast_pm_resume(void)
-{
-	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
-}
-
-#else
-#define bast_pm_suspend NULL
-#define bast_pm_resume NULL
-#endif
-
-static struct syscore_ops bast_pm_syscore_ops = {
-	.suspend	= bast_pm_suspend,
-	.resume		= bast_pm_resume,
-};
-
-static int smartmedia_map[] = { 0 };
-static int chip0_map[] = { 1 };
-static int chip1_map[] = { 2 };
-static int chip2_map[] = { 3 };
-
-static struct mtd_partition __initdata bast_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_16K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_16K,
-		.offset	= SZ_16K,
-	},
-	[2] = {
-		.name	= "user",
-		.offset	= SZ_4M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-/* the bast has 4 selectable slots for nand-flash, the three
- * on-board chip areas, as well as the external SmartMedia
- * slot.
- *
- * Note, there is no current hot-plug support for the SmartMedia
- * socket.
-*/
-
-static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
-	[0] = {
-		.name		= "SmartMedia",
-		.nr_chips	= 1,
-		.nr_map		= smartmedia_map,
-		.options        = NAND_SCAN_SILENT_NODEV,
-		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part,
-	},
-	[1] = {
-		.name		= "chip0",
-		.nr_chips	= 1,
-		.nr_map		= chip0_map,
-		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part,
-	},
-	[2] = {
-		.name		= "chip1",
-		.nr_chips	= 1,
-		.nr_map		= chip1_map,
-		.options        = NAND_SCAN_SILENT_NODEV,
-		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part,
-	},
-	[3] = {
-		.name		= "chip2",
-		.nr_chips	= 1,
-		.nr_map		= chip2_map,
-		.options        = NAND_SCAN_SILENT_NODEV,
-		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part,
-	}
-};
-
-static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
-{
-	unsigned int tmp;
-
-	slot = set->nr_map[slot] & 3;
-
-	pr_debug("bast_nand: selecting slot %d (set %p,%p)\n",
-		 slot, set, set->nr_map);
-
-	tmp = __raw_readb(BAST_VA_CTRL2);
-	tmp &= BAST_CPLD_CTLR2_IDERST;
-	tmp |= slot;
-	tmp |= BAST_CPLD_CTRL2_WNAND;
-
-	pr_debug("bast_nand: ctrl2 now %02x\n", tmp);
-
-	__raw_writeb(tmp, BAST_VA_CTRL2);
-}
-
-static struct s3c2410_platform_nand __initdata bast_nand_info = {
-	.tacls		= 30,
-	.twrph0		= 60,
-	.twrph1		= 60,
-	.nr_sets	= ARRAY_SIZE(bast_nand_sets),
-	.sets		= bast_nand_sets,
-	.select_chip	= bast_nand_select,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-/* DM9000 */
-
-static struct resource bast_dm9k_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4),
-	[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40),
-	[2] = DEFINE_RES_NAMED(BAST_IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
-					| IORESOURCE_IRQ_HIGHLEVEL),
-};
-
-/* for the moment we limit ourselves to 16bit IO until some
- * better IO routines can be written and tested
-*/
-
-static struct dm9000_plat_data bast_dm9k_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY,
-};
-
-static struct platform_device bast_device_dm9k = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(bast_dm9k_resource),
-	.resource	= bast_dm9k_resource,
-	.dev		= {
-		.platform_data = &bast_dm9k_platdata,
-	}
-};
-
-/* serial devices */
-
-#define SERIAL_BASE  (S3C2410_CS2 + BAST_PA_SUPERIO)
-#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ)
-#define SERIAL_CLK   (1843200)
-
-static struct plat_serial8250_port bast_sio_data[] = {
-	[0] = {
-		.mapbase	= SERIAL_BASE + 0x2f8,
-		.irq		= BAST_IRQ_PCSERIAL1,
-		.flags		= SERIAL_FLAGS,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= SERIAL_CLK,
-	},
-	[1] = {
-		.mapbase	= SERIAL_BASE + 0x3f8,
-		.irq		= BAST_IRQ_PCSERIAL2,
-		.flags		= SERIAL_FLAGS,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= SERIAL_CLK,
-	},
-	{ }
-};
-
-static struct platform_device bast_sio = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= &bast_sio_data,
-	},
-};
-
-/* we have devices on the bus which cannot work much over the
- * standard 100KHz i2c bus frequency
-*/
-
-static struct s3c2410_platform_i2c __initdata bast_i2c_info = {
-	.flags		= 0,
-	.slave_addr	= 0x10,
-	.frequency	= 100*1000,
-};
-
-/* Asix AX88796 10/100 ethernet controller */
-
-static struct ax_plat_data bast_asix_platdata = {
-	.flags		= AXFLG_MAC_FROMDEV,
-	.wordlength	= 2,
-	.dcr_val	= 0x48,
-	.rcr_val	= 0x40,
-};
-
-static struct resource bast_asix_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20),
-	[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1),
-	[2] = DEFINE_RES_IRQ(BAST_IRQ_ASIX),
-};
-
-static struct platform_device bast_device_asix = {
-	.name		= "ax88796",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(bast_asix_resource),
-	.resource	= bast_asix_resource,
-	.dev		= {
-		.platform_data = &bast_asix_platdata
-	}
-};
-
-/* Asix AX88796 10/100 ethernet controller parallel port */
-
-static struct resource bast_asixpp_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20), \
-					0x30 * 0x20),
-};
-
-static struct platform_device bast_device_axpp = {
-	.name		= "ax88796-pp",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(bast_asixpp_resource),
-	.resource	= bast_asixpp_resource,
-};
-
-/* LCD/VGA controller */
-
-static struct s3c2410fb_display __initdata bast_lcd_info[] = {
-	{
-		.type		= S3C2410_LCDCON1_TFT,
-		.width		= 640,
-		.height		= 480,
-
-		.pixclock	= 33333,
-		.xres		= 640,
-		.yres		= 480,
-		.bpp		= 4,
-		.left_margin	= 40,
-		.right_margin	= 20,
-		.hsync_len	= 88,
-		.upper_margin	= 30,
-		.lower_margin	= 32,
-		.vsync_len	= 3,
-
-		.lcdcon5	= 0x00014b02,
-	},
-	{
-		.type		= S3C2410_LCDCON1_TFT,
-		.width		= 640,
-		.height		= 480,
-
-		.pixclock	= 33333,
-		.xres		= 640,
-		.yres		= 480,
-		.bpp		= 8,
-		.left_margin	= 40,
-		.right_margin	= 20,
-		.hsync_len	= 88,
-		.upper_margin	= 30,
-		.lower_margin	= 32,
-		.vsync_len	= 3,
-
-		.lcdcon5	= 0x00014b02,
-	},
-	{
-		.type		= S3C2410_LCDCON1_TFT,
-		.width		= 640,
-		.height		= 480,
-
-		.pixclock	= 33333,
-		.xres		= 640,
-		.yres		= 480,
-		.bpp		= 16,
-		.left_margin	= 40,
-		.right_margin	= 20,
-		.hsync_len	= 88,
-		.upper_margin	= 30,
-		.lower_margin	= 32,
-		.vsync_len	= 3,
-
-		.lcdcon5	= 0x00014b02,
-	},
-};
-
-/* LCD/VGA controller */
-
-static struct s3c2410fb_mach_info __initdata bast_fb_info = {
-
-	.displays = bast_lcd_info,
-	.num_displays = ARRAY_SIZE(bast_lcd_info),
-	.default_display = 1,
-};
-
-/* I2C devices fitted. */
-
-static struct i2c_board_info bast_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	}, {
-		I2C_BOARD_INFO("simtec-pmu", 0x6b),
-	}, {
-		I2C_BOARD_INFO("ch7013", 0x75),
-	},
-};
-
-static struct s3c_hwmon_pdata bast_hwmon_info = {
-	/* LCD contrast (0-6.6V) */
-	.in[0] = &(struct s3c_hwmon_chcfg) {
-		.name		= "lcd-contrast",
-		.mult		= 3300,
-		.div		= 512,
-	},
-	/* LED current feedback */
-	.in[1] = &(struct s3c_hwmon_chcfg) {
-		.name		= "led-feedback",
-		.mult		= 3300,
-		.div		= 1024,
-	},
-	/* LCD feedback (0-6.6V) */
-	.in[2] = &(struct s3c_hwmon_chcfg) {
-		.name		= "lcd-feedback",
-		.mult		= 3300,
-		.div		= 512,
-	},
-	/* Vcore (1.8-2.0V), Vref 3.3V  */
-	.in[3] = &(struct s3c_hwmon_chcfg) {
-		.name		= "vcore",
-		.mult		= 3300,
-		.div		= 1024,
-	},
-};
-
-/* Standard BAST devices */
-// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
-
-static struct platform_device *bast_devices[] __initdata = {
-	&s3c2410_device_dclk,
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
- 	&s3c_device_rtc,
-	&s3c_device_nand,
-	&s3c_device_adc,
-	&s3c_device_hwmon,
-	&bast_device_dm9k,
-	&bast_device_asix,
-	&bast_device_axpp,
-	&bast_sio,
-};
-
-static struct s3c_cpufreq_board __initdata bast_cpufreq = {
-	.refresh	= 7800, /* 7.8usec */
-	.auto_io	= 1,
-	.need_io	= 1,
-};
-
-static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
-	.have_mic	= 1,
-	.have_lout	= 1,
-};
-
-static void __init bast_map_io(void)
-{
-	s3c_hwmon_set_platdata(&bast_hwmon_info);
-
-	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
-	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init bast_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init bast_init(void)
-{
-	register_syscore_ops(&bast_pm_syscore_ops);
-
-	s3c_i2c0_set_platdata(&bast_i2c_info);
-	s3c_nand_set_platdata(&bast_nand_info);
-	s3c24xx_fb_set_platdata(&bast_fb_info);
-	platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
-
-	i2c_register_board_info(0, bast_i2c_devs,
-				ARRAY_SIZE(bast_i2c_devs));
-
-	usb_simtec_init();
-	nor_simtec_init();
-	simtec_audio_add(NULL, true, &bast_audio);
-
-	WARN_ON(gpio_request(S3C2410_GPA(21), "bast nreset"));
-	
-	s3c_cpufreq_setboard(&bast_cpufreq);
-}
-
-MACHINE_START(BAST, "Simtec-BAST")
-	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.map_io		= bast_map_io,
-	.init_irq	= s3c2410_init_irq,
-	.init_machine	= bast_init,
-	.init_time	= bast_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-crag6410-module.c b/arch/arm/mach-s3c/mach-crag6410-module.c
index 4edde13b89b5..4ffcf024b09d 100644
--- a/arch/arm/mach-s3c/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c/mach-crag6410-module.c
@@ -32,9 +32,18 @@
 
 #include "crag6410.h"
 
+static struct gpiod_lookup_table wm0010_gpiod_table = {
+	.dev_id = "spi0.0", /* SPI device name */
+	.table = {
+		/* Active high for Glenfarclas Rev 2 */
+		GPIO_LOOKUP("GPION", 6,
+			    "reset", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct wm0010_pdata wm0010_pdata = {
-	.gpio_reset = S3C64XX_GPN(6),
-	.reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
+	/* Intentionally left blank */
 };
 
 static struct spi_board_info wm1253_devs[] = {
@@ -61,10 +70,19 @@ static struct spi_board_info balblair_devs[] = {
 	},
 };
 
+static struct gpiod_lookup_table wm5100_gpiod_table = {
+	.dev_id = "1-001a", /* Device 001a on I2C bus 1 */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("wm5100", 3,
+			    "hp-pol", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct wm5100_pdata wm5100_pdata = {
-	.ldo_ena = S3C64XX_GPN(7),
 	.irq_flags = IRQF_TRIGGER_HIGH,
-	.gpio_base = CODEC_GPIO_BASE,
 
 	.in_mode = {
 		WM5100_IN_DIFF,
@@ -73,7 +91,6 @@ static struct wm5100_pdata wm5100_pdata = {
 		WM5100_IN_SE,
 	},
 
-	.hp_pol = CODEC_GPIO_BASE + 3,
 	.jack_modes = {
 		{ WM5100_MICDET_MICBIAS3, 0, 0 },
 		{ WM5100_MICDET_MICBIAS2, 1, 1 },
@@ -110,9 +127,16 @@ static struct wm8996_retune_mobile_config wm8996_retune[] = {
 	},
 };
 
+static struct gpiod_lookup_table wm8996_gpiod_table = {
+	.dev_id = "1-001a", /* Device 001a on I2C bus 1 */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct wm8996_pdata wm8996_pdata __initdata = {
-	.ldo_ena = S3C64XX_GPN(7),
-	.gpio_base = CODEC_GPIO_BASE,
 	.micdet_def = 1,
 	.inl_mode = WM8996_DIFFERRENTIAL_1,
 	.inr_mode = WM8996_DIFFERRENTIAL_1,
@@ -296,12 +320,20 @@ static const struct i2c_board_info wm6230_i2c_devs[] = {
 };
 
 static struct wm2200_pdata wm2200_pdata = {
-	.ldo_ena = S3C64XX_GPN(7),
 	.gpio_defaults = {
 		[2] = 0x0005,  /* GPIO3 24.576MHz output clock */
 	},
 };
 
+static struct gpiod_lookup_table wm2200_gpiod_table = {
+	.dev_id = "1-003a", /* Device 003a on I2C bus 1 */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static const struct i2c_board_info wm2200_i2c[] = {
 	{ I2C_BOARD_INFO("wm2200", 0x3a),
 	  .platform_data = &wm2200_pdata, },
@@ -337,18 +369,21 @@ static const struct {
 	{ .id = 0x21, .rev = 0xff, .name = "1275-EV1 Mortlach" },
 	{ .id = 0x25, .rev = 0xff, .name = "1274-EV1 Glencadam" },
 	{ .id = 0x31, .rev = 0xff, .name = "1253-EV1 Tomatin",
-	  .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
+	  .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs),
+	  .gpiod_table = &wm0010_gpiod_table },
 	{ .id = 0x32, .rev = 0xff, .name = "XXXX-EV1 Caol Illa" },
 	{ .id = 0x33, .rev = 0xff, .name = "XXXX-EV1 Oban" },
 	{ .id = 0x34, .rev = 0xff, .name = "WM0010-6320-CS42 Balblair",
 	  .spi_devs = balblair_devs,
 	  .num_spi_devs = ARRAY_SIZE(balblair_devs) },
 	{ .id = 0x39, .rev = 0xff, .name = "1254-EV1 Dallas Dhu",
-	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
+	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs),
+	  .gpiod_table = &wm8996_gpiod_table },
 	{ .id = 0x3a, .rev = 0xff, .name = "1259-EV1 Tobermory",
 	  .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
 	{ .id = 0x3b, .rev = 0xff, .name = "1255-EV1 Kilchoman",
-	  .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
+	  .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs),
+	  .gpiod_table = &wm5100_gpiod_table },
 	{ .id = 0x3c, .rev = 0xff, .name = "1273-EV1 Longmorn" },
 	{ .id = 0x3d, .rev = 0xff, .name = "1277-EV1 Littlemill",
 	  .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs),
@@ -362,7 +397,8 @@ static const struct {
 	  .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs),
 	  .gpiod_table = &wm5102_gpiod_table },
 	{ .id = 0x3f, .rev = -1, .name = "WM2200-6271-CS90-M-REV1",
-	  .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) },
+	  .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c),
+	  .gpiod_table = &wm2200_gpiod_table },
 };
 
 static int wlf_gf_module_probe(struct i2c_client *i2c)
@@ -410,7 +446,7 @@ static int wlf_gf_module_probe(struct i2c_client *i2c)
 }
 
 static const struct i2c_device_id wlf_gf_module_id[] = {
-	{ "wlf-gf-module", 0 },
+	{ "wlf-gf-module" },
 	{ }
 };
 
@@ -418,7 +454,7 @@ static struct i2c_driver wlf_gf_module_driver = {
 	.driver = {
 		.name = "wlf-gf-module"
 	},
-	.probe_new = wlf_gf_module_probe,
+	.probe = wlf_gf_module_probe,
 	.id_table = wlf_gf_module_id,
 };
 
diff --git a/arch/arm/mach-s3c/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c
index 9a45474d1bf7..028169c7debf 100644
--- a/arch/arm/mach-s3c/mach-crag6410.c
+++ b/arch/arm/mach-s3c/mach-crag6410.c
@@ -14,6 +14,7 @@
 #include <linux/fb.h>
 #include <linux/io.h>
 #include <linux/init.h>
+#include <linux/input-event-codes.h>
 #include <linux/gpio.h>
 #include <linux/gpio/machine.h>
 #include <linux/leds.h>
@@ -38,8 +39,6 @@
 #include <linux/mfd/wm831x/irq.h>
 #include <linux/mfd/wm831x/gpio.h>
 
-#include <sound/wm1250-ev1.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
@@ -57,7 +56,6 @@
 #include "keypad.h"
 #include "devs.h"
 #include "cpu.h"
-#include <linux/soc/samsung/s3c-adc.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include "pm.h"
 
@@ -254,14 +252,17 @@ static struct resource crag6410_mmgpio_resource[] = {
 	[0] = DEFINE_RES_MEM_NAMED(S3C64XX_PA_XM0CSN4, 1, "dat"),
 };
 
-static struct platform_device crag6410_mmgpio = {
+static const struct property_entry crag6410_mmgpio_props[] = {
+	PROPERTY_ENTRY_U32("gpio-mmio,base", MMGPIO_GPIO_BASE),
+	{ }
+};
+
+static struct platform_device_info crag6410_mmgpio_devinfo = {
 	.name		= "basic-mmio-gpio",
 	.id		= -1,
-	.resource	= crag6410_mmgpio_resource,
-	.num_resources	= ARRAY_SIZE(crag6410_mmgpio_resource),
-	.dev.platform_data = &(struct bgpio_pdata) {
-		.base	= MMGPIO_GPIO_BASE,
-	},
+	.res		= crag6410_mmgpio_resource,
+	.num_res	= ARRAY_SIZE(crag6410_mmgpio_resource),
+	.properties	= crag6410_mmgpio_props,
 };
 
 static struct platform_device speyside_device = {
@@ -375,7 +376,6 @@ static struct platform_device *crag6410_devices[] __initdata = {
 	&crag6410_gpio_keydev,
 	&crag6410_dm9k_device,
 	&s3c64xx_device_spi0,
-	&crag6410_mmgpio,
 	&crag6410_lcd_powerdev,
 	&crag6410_backlight_device,
 	&speyside_device,
@@ -713,13 +713,16 @@ static struct wm831x_pdata glenfarclas_pmic_pdata = {
 	.disable_touch = true,
 };
 
-static struct wm1250_ev1_pdata wm1250_ev1_pdata = {
-	.gpios = {
-		[WM1250_EV1_GPIO_CLK_ENA] = S3C64XX_GPN(12),
-		[WM1250_EV1_GPIO_CLK_SEL0] = S3C64XX_GPL(12),
-		[WM1250_EV1_GPIO_CLK_SEL1] = S3C64XX_GPL(13),
-		[WM1250_EV1_GPIO_OSR] = S3C64XX_GPL(14),
-		[WM1250_EV1_GPIO_MASTER] = S3C64XX_GPL(8),
+static struct gpiod_lookup_table crag_wm1250_ev1_gpiod_table = {
+	/* The WM1250-EV1 is device 0027 on I2C bus 1 */
+	.dev_id = "1-0027",
+	.table = {
+		GPIO_LOOKUP("GPION", 12, "clk-ena", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 12, "clk-sel0", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 13, "clk-sel1", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 14, "osr", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 8, "master", GPIO_ACTIVE_HIGH),
+		{ },
 	},
 };
 
@@ -733,9 +736,7 @@ static struct i2c_board_info i2c_devs1[] = {
 	{ I2C_BOARD_INFO("wlf-gf-module", 0x24) },
 	{ I2C_BOARD_INFO("wlf-gf-module", 0x25) },
 	{ I2C_BOARD_INFO("wlf-gf-module", 0x26) },
-
-	{ I2C_BOARD_INFO("wm1250-ev1", 0x27),
-	  .platform_data = &wm1250_ev1_pdata },
+	{ I2C_BOARD_INFO("wm1250-ev1", 0x27), },
 };
 
 static struct s3c2410_platform_i2c i2c1_pdata = {
@@ -862,6 +863,7 @@ static void __init crag6410_machine_init(void)
 
 	gpiod_add_lookup_table(&crag_pmic_gpiod_table);
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+	gpiod_add_lookup_table(&crag_wm1250_ev1_gpiod_table);
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
 	samsung_keypad_set_platdata(&crag6410_keypad_data);
@@ -871,6 +873,7 @@ static void __init crag6410_machine_init(void)
 
 	pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup));
 	platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
+	platform_device_register_full(&crag6410_mmgpio_devinfo);
 
 	gpio_led_register_device(-1, &gpio_leds_pdata);
 
diff --git a/arch/arm/mach-s3c/mach-gta02.c b/arch/arm/mach-s3c/mach-gta02.c
deleted file mode 100644
index abfdce765525..000000000000
--- a/arch/arm/mach-s3c/mach-gta02.c
+++ /dev/null
@@ -1,580 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
-//
-// Copyright (C) 2006-2009 by Openmoko, Inc.
-// Authors: Harald Welte <laforge@openmoko.org>
-//          Andy Green <andy@openmoko.org>
-//          Werner Almesberger <werner@openmoko.org>
-// All rights reserved.
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-
-#include <linux/mmc/host.h>
-
-#include <linux/mfd/pcf50633/adc.h>
-#include <linux/mfd/pcf50633/backlight.h>
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/mfd/pcf50633/gpio.h>
-#include <linux/mfd/pcf50633/mbc.h>
-#include <linux/mfd/pcf50633/pmic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <linux/regulator/machine.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/s3c24xx.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/fb-s3c2410.h>
-
-#include "regs-gpio.h"
-#include "regs-irq.h"
-#include "gpio-samsung.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "gpio-cfg.h"
-#include "pm.h"
-
-#include "s3c24xx.h"
-#include "gta02.h"
-
-static struct pcf50633 *gta02_pcf;
-
-/*
- * This gets called frequently when we paniced.
- */
-
-static long gta02_panic_blink(int state)
-{
-	char led;
-
-	led = (state) ? 1 : 0;
-	gpio_direction_output(GTA02_GPIO_AUX_LED, led);
-
-	return 0;
-}
-
-
-static struct map_desc gta02_iodesc[] __initdata = {
-	{
-		.virtual	= 0xe0000000,
-		.pfn		= __phys_to_pfn(S3C2410_CS3 + 0x01000000),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	},
-};
-
-#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg gta02_uartcfgs[] = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-};
-
-#ifdef CONFIG_CHARGER_PCF50633
-/*
- * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
- * We use this to recognize that we can pull 1A from the USB socket.
- *
- * These constants are the measured pcf50633 ADC levels with the 1A
- * charger / 48K resistor, and with no pulldown resistor.
- */
-
-#define ADC_NOM_CHG_DETECT_1A 6
-#define ADC_NOM_CHG_DETECT_USB 43
-
-#ifdef CONFIG_PCF50633_ADC
-static void
-gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
-{
-	int  ma;
-
-	/* Interpret charger type */
-	if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
-
-		/*
-		 * Sanity - stop GPO driving out now that we have a 1A charger
-		 * GPO controls USB Host power generation on GTA02
-		 */
-		pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
-
-		ma = 1000;
-	} else
-		ma = 100;
-
-	pcf50633_mbc_usb_curlim_set(pcf, ma);
-}
-#endif
-
-static struct delayed_work gta02_charger_work;
-static int gta02_usb_vbus_draw;
-
-static void gta02_charger_worker(struct work_struct *work)
-{
-	if (gta02_usb_vbus_draw) {
-		pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw);
-		return;
-	}
-
-#ifdef CONFIG_PCF50633_ADC
-	pcf50633_adc_async_read(gta02_pcf,
-				PCF50633_ADCC1_MUX_ADCIN1,
-				PCF50633_ADCC1_AVERAGE_16,
-				gta02_configure_pmu_for_charger,
-				NULL);
-#else
-	/*
-	 * If the PCF50633 ADC is disabled we fallback to a
-	 * 100mA limit for safety.
-	 */
-	pcf50633_mbc_usb_curlim_set(gta02_pcf, 100);
-#endif
-}
-
-#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
-
-static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
-{
-	if (irq == PCF50633_IRQ_USBINS) {
-		schedule_delayed_work(&gta02_charger_work,
-				      GTA02_CHARGER_CONFIGURE_TIMEOUT);
-
-		return;
-	}
-
-	if (irq == PCF50633_IRQ_USBREM) {
-		cancel_delayed_work_sync(&gta02_charger_work);
-		gta02_usb_vbus_draw = 0;
-	}
-}
-
-static void gta02_udc_vbus_draw(unsigned int ma)
-{
-	if (!gta02_pcf)
-		return;
-
-	gta02_usb_vbus_draw = ma;
-
-	schedule_delayed_work(&gta02_charger_work,
-			      GTA02_CHARGER_CONFIGURE_TIMEOUT);
-}
-#else /* !CONFIG_CHARGER_PCF50633 */
-#define gta02_pmu_event_callback	NULL
-#define gta02_udc_vbus_draw		NULL
-#endif
-
-static char *gta02_batteries[] = {
-	"battery",
-};
-
-static struct pcf50633_bl_platform_data gta02_backlight_data = {
-	.default_brightness = 0x3f,
-	.default_brightness_limit = 0,
-	.ramp_time = 5,
-};
-
-static struct pcf50633_platform_data gta02_pcf_pdata = {
-	.resumers = {
-		[0] =	PCF50633_INT1_USBINS |
-			PCF50633_INT1_USBREM |
-			PCF50633_INT1_ALARM,
-		[1] =	PCF50633_INT2_ONKEYF,
-		[2] =	PCF50633_INT3_ONKEY1S,
-		[3] =	PCF50633_INT4_LOWSYS |
-			PCF50633_INT4_LOWBAT |
-			PCF50633_INT4_HIGHTMP,
-	},
-
-	.batteries = gta02_batteries,
-	.num_batteries = ARRAY_SIZE(gta02_batteries),
-
-	.charger_reference_current_ma = 1000,
-
-	.backlight_data = &gta02_backlight_data,
-
-	.reg_init_data = {
-		[PCF50633_REGULATOR_AUTO] = {
-			.constraints = {
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.always_on = 1,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_DOWN1] = {
-			.constraints = {
-				.min_uV = 1300000,
-				.max_uV = 1600000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.always_on = 1,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_DOWN2] = {
-			.constraints = {
-				.min_uV = 1800000,
-				.max_uV = 1800000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-				.always_on = 1,
-			},
-		},
-		[PCF50633_REGULATOR_HCLDO] = {
-			.constraints = {
-				.min_uV = 2000000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-						REGULATOR_CHANGE_STATUS,
-			},
-		},
-		[PCF50633_REGULATOR_LDO1] = {
-			.constraints = {
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO2] = {
-			.constraints = {
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO3] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO4] = {
-			.constraints = {
-				.min_uV = 3200000,
-				.max_uV = 3200000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO5] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO6] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-			},
-		},
-		[PCF50633_REGULATOR_MEMLDO] = {
-			.constraints = {
-				.min_uV = 1800000,
-				.max_uV = 1800000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-			},
-		},
-
-	},
-	.mbc_event_callback = gta02_pmu_event_callback,
-};
-
-
-/* NOR Flash. */
-
-#define GTA02_FLASH_BASE	0x18000000 /* GCS3 */
-#define GTA02_FLASH_SIZE	0x200000 /* 2MBytes */
-
-static struct physmap_flash_data gta02_nor_flash_data = {
-	.width		= 2,
-};
-
-static struct resource gta02_nor_flash_resource =
-	DEFINE_RES_MEM(GTA02_FLASH_BASE, GTA02_FLASH_SIZE);
-
-static struct platform_device gta02_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &gta02_nor_flash_data,
-	},
-	.resource	= &gta02_nor_flash_resource,
-	.num_resources	= 1,
-};
-
-
-static struct platform_device s3c24xx_pwm_device = {
-	.name		= "s3c24xx_pwm",
-	.num_resources	= 0,
-};
-
-static struct platform_device gta02_dfbmcs320_device = {
-	.name = "dfbmcs320",
-};
-
-static struct i2c_board_info gta02_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("pcf50633", 0x73),
-		.irq = GTA02_IRQ_PCF50633,
-		.platform_data = &gta02_pcf_pdata,
-	},
-	{
-		I2C_BOARD_INFO("wm8753", 0x1a),
-	},
-};
-
-static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
-	[0] = {
-		/*
-		 * This name is also hard-coded in the boot loaders, so
-		 * changing it would would require all users to upgrade
-		 * their boot loaders, some of which are stored in a NOR
-		 * that is considered to be immutable.
-		 */
-		.name		= "neo1973-nand",
-		.nr_chips	= 1,
-		.flash_bbt	= 1,
-	},
-};
-
-/*
- * Choose a set of timings derived from S3C@2442B MCP54
- * data sheet (K5D2G13ACM-D075 MCP Memory).
- */
-
-static struct s3c2410_platform_nand __initdata gta02_nand_info = {
-	.tacls		= 0,
-	.twrph0		= 25,
-	.twrph1		= 15,
-	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
-	.sets		= gta02_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-
-/* Get PMU to set USB current limit accordingly. */
-static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = {
-	.vbus_draw	= gta02_udc_vbus_draw,
-	.pullup_pin = GTA02_GPIO_USB_PULLUP,
-};
-
-/* USB */
-static struct s3c2410_hcd_info gta02_usb_info __initdata = {
-	.port[0]	= {
-		.flags	= S3C_HCDFLG_USED,
-	},
-	.port[1]	= {
-		.flags	= 0,
-	},
-};
-
-/* Touchscreen */
-static struct s3c2410_ts_mach_info gta02_ts_info = {
-	.delay			= 10000,
-	.presc			= 0xff, /* slow as we can go */
-	.oversampling_shift	= 2,
-};
-
-/* Buttons */
-static struct gpio_keys_button gta02_buttons[] = {
-	{
-		.gpio = GTA02_GPIO_AUX_KEY,
-		.code = KEY_PHONE,
-		.desc = "Aux",
-		.type = EV_KEY,
-		.debounce_interval = 100,
-	},
-	{
-		.gpio = GTA02_GPIO_HOLD_KEY,
-		.code = KEY_PAUSE,
-		.desc = "Hold",
-		.type = EV_KEY,
-		.debounce_interval = 100,
-	},
-};
-
-static struct gpio_keys_platform_data gta02_buttons_pdata = {
-	.buttons = gta02_buttons,
-	.nbuttons = ARRAY_SIZE(gta02_buttons),
-};
-
-static struct platform_device gta02_buttons_device = {
-	.name = "gpio-keys",
-	.id = -1,
-	.dev = {
-		.platform_data = &gta02_buttons_pdata,
-	},
-};
-
-static struct gpiod_lookup_table gta02_audio_gpio_table = {
-	.dev_id = "neo1973-audio",
-	.table = {
-		GPIO_LOOKUP("GPIOJ", 2, "amp-shut", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOJ", 1, "hp", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device gta02_audio = {
-	.name = "neo1973-audio",
-	.id = -1,
-};
-
-static struct gpiod_lookup_table gta02_mmc_gpio_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init gta02_map_io(void)
-{
-	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
-	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-
-/* These are the guys that don't need to be children of PMU. */
-
-static struct platform_device *gta02_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_sdi,
-	&s3c_device_usbgadget,
-	&s3c_device_nand,
-	&gta02_nor_flash,
-	&s3c24xx_pwm_device,
-	&s3c_device_iis,
-	&s3c_device_i2c0,
-	&gta02_dfbmcs320_device,
-	&gta02_buttons_device,
-	&s3c_device_adc,
-	&s3c_device_ts,
-	&gta02_audio,
-};
-
-static void gta02_poweroff(void)
-{
-	pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
-}
-
-static void __init gta02_machine_init(void)
-{
-	/* Set the panic callback to turn AUX LED on or off. */
-	panic_blink = gta02_panic_blink;
-
-	s3c_pm_init();
-
-#ifdef CONFIG_CHARGER_PCF50633
-	INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
-#endif
-
-	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
-	s3c24xx_ts_set_platdata(&gta02_ts_info);
-	s3c_ohci_set_platdata(&gta02_usb_info);
-	s3c_nand_set_platdata(&gta02_nand_info);
-	s3c_i2c0_set_platdata(NULL);
-
-	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
-
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-
-	gpiod_add_lookup_table(&gta02_audio_gpio_table);
-	gpiod_add_lookup_table(&gta02_mmc_gpio_table);
-	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
-	pm_power_off = gta02_poweroff;
-
-	regulator_has_full_constraints();
-}
-
-static void __init gta02_init_time(void)
-{
-	s3c2442_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-MACHINE_START(NEO1973_GTA02, "GTA02")
-	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2442,
-	.map_io		= gta02_map_io,
-	.init_irq	= s3c2442_init_irq,
-	.init_machine	= gta02_machine_init,
-	.init_time	= gta02_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-h1940.c b/arch/arm/mach-s3c/mach-h1940.c
deleted file mode 100644
index 032b18837855..000000000000
--- a/arch/arm/mach-s3c/mach-h1940.c
+++ /dev/null
@@ -1,802 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2003-2005 Simtec Electronics
-//   Ben Dooks <ben@simtec.co.uk>
-//
-// https://www.handhelds.org/projects/h1940.html
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/pda_power.h>
-#include <linux/s3c_adc_battery.h>
-#include <linux/delay.h>
-
-#include <video/platform_lcd.h>
-
-#include <linux/mmc/host.h>
-#include <linux/export.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-
-#include <sound/uda1380.h>
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include "map.h"
-#include "hardware-s3c24xx.h"
-#include "regs-clock.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "gpio-cfg.h"
-#include "pm.h"
-
-#include "s3c24xx.h"
-#include "h1940.h"
-
-#define H1940_LATCH		((void __force __iomem *)0xF8000000)
-
-#define H1940_PA_LATCH		S3C2410_CS2
-
-#define H1940_LATCH_BIT(x)	(1 << ((x) + 16 - S3C_GPIO_END))
-
-#define S3C24XX_PLL_MDIV_SHIFT         (12)
-#define S3C24XX_PLL_PDIV_SHIFT         (4)
-#define S3C24XX_PLL_SDIV_SHIFT         (0)
-
-static struct map_desc h1940_iodesc[] __initdata = {
-	[0] = {
-		.virtual	= (unsigned long)H1940_LATCH,
-		.pfn		= __phys_to_pfn(H1940_PA_LATCH),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE
-	},
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x245,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x00,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.uart_flags  = UPF_CONS_FLOW,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-	}
-};
-
-/* Board control latch control */
-
-static unsigned int latch_state;
-
-static void h1940_latch_control(unsigned int clear, unsigned int set)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	latch_state &= ~clear;
-	latch_state |= set;
-
-	__raw_writel(latch_state, H1940_LATCH);
-
-	local_irq_restore(flags);
-}
-
-static inline int h1940_gpiolib_to_latch(int offset)
-{
-	return 1 << (offset + 16);
-}
-
-static void h1940_gpiolib_latch_set(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	int latch_bit = h1940_gpiolib_to_latch(offset);
-
-	h1940_latch_control(value ? 0 : latch_bit,
-		value ? latch_bit : 0);
-}
-
-static int h1940_gpiolib_latch_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	h1940_gpiolib_latch_set(chip, offset, value);
-	return 0;
-}
-
-static int h1940_gpiolib_latch_get(struct gpio_chip *chip,
-					unsigned offset)
-{
-	return (latch_state >> (offset + 16)) & 1;
-}
-
-static struct gpio_chip h1940_latch_gpiochip = {
-	.base			= H1940_LATCH_GPIO(0),
-	.owner			= THIS_MODULE,
-	.label			= "H1940_LATCH",
-	.ngpio			= 16,
-	.direction_output	= h1940_gpiolib_latch_output,
-	.set			= h1940_gpiolib_latch_set,
-	.get			= h1940_gpiolib_latch_get,
-};
-
-static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
-	.vbus_pin		= S3C2410_GPG(5),
-	.vbus_pin_inverted	= 1,
-	.pullup_pin		= H1940_LATCH_USB_DP,
-};
-
-static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
-		.delay = 10000,
-		.presc = 49,
-		.oversampling_shift = 2,
-		.cfg_gpio = s3c24xx_ts_cfg_gpio,
-};
-
-/*
- * Set lcd on or off
- */
-static struct s3c2410fb_display h1940_lcd __initdata = {
-	.lcdcon5=	S3C2410_LCDCON5_FRM565 | \
-			S3C2410_LCDCON5_INVVLINE | \
-			S3C2410_LCDCON5_HWSWP,
-
-	.type =		S3C2410_LCDCON1_TFT,
-	.width =	240,
-	.height =	320,
-	.pixclock =	260000,
-	.xres =		240,
-	.yres =		320,
-	.bpp =		16,
-	.left_margin =	8,
-	.right_margin =	20,
-	.hsync_len =	4,
-	.upper_margin =	8,
-	.lower_margin = 7,
-	.vsync_len =	1,
-};
-
-static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
-	.displays = &h1940_lcd,
-	.num_displays = 1,
-	.default_display = 0,
-
-	.lpcsel =	0x02,
-	.gpccon =	0xaa940659,
-	.gpccon_mask =	0xffffc0f0,
-	.gpccon_reg =	S3C2410_GPCCON,
-	.gpcup =	0x0000ffff,
-	.gpcup_mask =	0xffffffff,
-	.gpcup_reg =	S3C2410_GPCUP,
-	.gpdcon =	0xaa84aaa0,
-	.gpdcon_mask =	0xffffffff,
-	.gpdcon_reg =	S3C2410_GPDCON,
-	.gpdup =	0x0000faff,
-	.gpdup_mask =	0xffffffff,
-	.gpdup_reg =	S3C2410_GPDUP,
-};
-
-static int power_supply_init(struct device *dev)
-{
-	return gpio_request(S3C2410_GPF(2), "cable plugged");
-}
-
-static int h1940_is_ac_online(void)
-{
-	return !gpio_get_value(S3C2410_GPF(2));
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(S3C2410_GPF(2));
-}
-
-static char *h1940_supplicants[] = {
-	"main-battery",
-	"backup-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init			= power_supply_init,
-	.is_ac_online		= h1940_is_ac_online,
-	.exit			= power_supply_exit,
-	.supplied_to		= h1940_supplicants,
-	.num_supplicants	= ARRAY_SIZE(h1940_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
-	[0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \
-			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE),
-};
-
-static struct platform_device power_supply = {
-	.name		= "pda-power",
-	.id		= -1,
-	.dev		= {
-				.platform_data =
-					&power_supply_info,
-	},
-	.resource	= power_supply_resources,
-	.num_resources	= ARRAY_SIZE(power_supply_resources),
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
-	{ .volt = 4070, .cur = 162, .level = 100},
-	{ .volt = 4040, .cur = 165, .level = 95},
-	{ .volt = 4016, .cur = 164, .level = 90},
-	{ .volt = 3996, .cur = 166, .level = 85},
-	{ .volt = 3971, .cur = 168, .level = 80},
-	{ .volt = 3951, .cur = 168, .level = 75},
-	{ .volt = 3931, .cur = 170, .level = 70},
-	{ .volt = 3903, .cur = 172, .level = 65},
-	{ .volt = 3886, .cur = 172, .level = 60},
-	{ .volt = 3858, .cur = 176, .level = 55},
-	{ .volt = 3842, .cur = 176, .level = 50},
-	{ .volt = 3818, .cur = 176, .level = 45},
-	{ .volt = 3789, .cur = 180, .level = 40},
-	{ .volt = 3769, .cur = 180, .level = 35},
-	{ .volt = 3749, .cur = 184, .level = 30},
-	{ .volt = 3732, .cur = 184, .level = 25},
-	{ .volt = 3716, .cur = 184, .level = 20},
-	{ .volt = 3708, .cur = 184, .level = 15},
-	{ .volt = 3716, .cur = 96, .level = 10},
-	{ .volt = 3700, .cur = 96, .level = 5},
-	{ .volt = 3684, .cur = 96, .level = 0},
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
-	{ .volt = 4130, .cur = 0, .level = 100},
-	{ .volt = 3982, .cur = 0, .level = 50},
-	{ .volt = 3854, .cur = 0, .level = 10},
-	{ .volt = 3841, .cur = 0, .level = 0},
-};
-
-static struct gpiod_lookup_table h1940_bat_gpio_table = {
-	.dev_id = "s3c-adc-battery",
-	.table = {
-		/* Charge status S3C2410_GPF(3) */
-		GPIO_LOOKUP("GPIOF", 3, "charge-status", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static int h1940_bat_init(void)
-{
-	int ret;
-
-	ret = gpio_request(H1940_LATCH_SM803_ENABLE, "h1940-charger-enable");
-	if (ret)
-		return ret;
-	gpio_direction_output(H1940_LATCH_SM803_ENABLE, 0);
-
-	return 0;
-
-}
-
-static void h1940_bat_exit(void)
-{
-	gpio_free(H1940_LATCH_SM803_ENABLE);
-}
-
-static void h1940_enable_charger(void)
-{
-	gpio_set_value(H1940_LATCH_SM803_ENABLE, 1);
-}
-
-static void h1940_disable_charger(void)
-{
-	gpio_set_value(H1940_LATCH_SM803_ENABLE, 0);
-}
-
-static struct s3c_adc_bat_pdata h1940_bat_cfg = {
-	.init = h1940_bat_init,
-	.exit = h1940_bat_exit,
-	.enable_charger = h1940_enable_charger,
-	.disable_charger = h1940_disable_charger,
-	.lut_noac = bat_lut_noac,
-	.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
-	.lut_acin = bat_lut_acin,
-	.lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
-	.volt_channel = 0,
-	.current_channel = 1,
-	.volt_mult = 4056,
-	.current_mult = 1893,
-	.internal_impedance = 200,
-	.backup_volt_channel = 3,
-	/* TODO Check backup volt multiplier */
-	.backup_volt_mult = 4056,
-	.backup_volt_min = 0,
-	.backup_volt_max = 4149288
-};
-
-static struct platform_device h1940_battery = {
-	.name             = "s3c-adc-battery",
-	.id               = -1,
-	.dev = {
-		.parent = &s3c_device_adc.dev,
-		.platform_data = &h1940_bat_cfg,
-	},
-};
-
-static DEFINE_SPINLOCK(h1940_blink_spin);
-
-int h1940_led_blink_set(struct gpio_desc *desc, int state,
-	unsigned long *delay_on, unsigned long *delay_off)
-{
-	int blink_gpio, check_gpio1, check_gpio2;
-	int gpio = desc ? desc_to_gpio(desc) : -EINVAL;
-
-	switch (gpio) {
-	case H1940_LATCH_LED_GREEN:
-		blink_gpio = S3C2410_GPA(7);
-		check_gpio1 = S3C2410_GPA(1);
-		check_gpio2 = S3C2410_GPA(3);
-		break;
-	case H1940_LATCH_LED_RED:
-		blink_gpio = S3C2410_GPA(1);
-		check_gpio1 = S3C2410_GPA(7);
-		check_gpio2 = S3C2410_GPA(3);
-		break;
-	default:
-		blink_gpio = S3C2410_GPA(3);
-		check_gpio1 = S3C2410_GPA(1);
-		check_gpio2 = S3C2410_GPA(7);
-		break;
-	}
-
-	if (delay_on && delay_off && !*delay_on && !*delay_off)
-		*delay_on = *delay_off = 500;
-
-	spin_lock(&h1940_blink_spin);
-
-	switch (state) {
-	case GPIO_LED_NO_BLINK_LOW:
-	case GPIO_LED_NO_BLINK_HIGH:
-		if (!gpio_get_value(check_gpio1) &&
-		    !gpio_get_value(check_gpio2))
-			gpio_set_value(H1940_LATCH_LED_FLASH, 0);
-		gpio_set_value(blink_gpio, 0);
-		if (gpio_is_valid(gpio))
-			gpio_set_value(gpio, state);
-		break;
-	case GPIO_LED_BLINK:
-		if (gpio_is_valid(gpio))
-			gpio_set_value(gpio, 0);
-		gpio_set_value(H1940_LATCH_LED_FLASH, 1);
-		gpio_set_value(blink_gpio, 1);
-		break;
-	}
-
-	spin_unlock(&h1940_blink_spin);
-
-	return 0;
-}
-EXPORT_SYMBOL(h1940_led_blink_set);
-
-static struct gpio_led h1940_leds_desc[] = {
-	{
-		.name			= "Green",
-		.default_trigger	= "main-battery-full",
-		.gpio			= H1940_LATCH_LED_GREEN,
-		.retain_state_suspended	= 1,
-	},
-	{
-		.name			= "Red",
-		.default_trigger
-			= "main-battery-charging-blink-full-solid",
-		.gpio			= H1940_LATCH_LED_RED,
-		.retain_state_suspended	= 1,
-	},
-};
-
-static struct gpio_led_platform_data h1940_leds_pdata = {
-	.num_leds	= ARRAY_SIZE(h1940_leds_desc),
-	.leds		= h1940_leds_desc,
-	.gpio_blink_set	= h1940_led_blink_set,
-};
-
-static struct platform_device h1940_device_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-			.platform_data = &h1940_leds_pdata,
-	},
-};
-
-static struct platform_device h1940_device_bluetooth = {
-	.name             = "h1940-bt",
-	.id               = -1,
-};
-
-static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
-{
-	s3c24xx_mci_def_set_power(power_mode, vdd);
-
-	switch (power_mode) {
-	case MMC_POWER_OFF:
-		gpio_set_value(H1940_LATCH_SD_POWER, 0);
-		break;
-	case MMC_POWER_UP:
-	case MMC_POWER_ON:
-		gpio_set_value(H1940_LATCH_SD_POWER, 1);
-		break;
-	default:
-		break;
-	}
-}
-
-static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
-	.set_power     = h1940_set_mmc_power,
-	.ocr_avail     = MMC_VDD_32_33,
-};
-
-static struct gpiod_lookup_table h1940_mmc_gpio_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* Card detect S3C2410_GPF(5) */
-		GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
-		/* Write protect S3C2410_GPH(8) */
-		GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table h1940_audio_gpio_table = {
-	.dev_id = "h1940-audio",
-	.table = {
-		GPIO_LOOKUP("H1940_LATCH",
-			    H1940_LATCH_AUDIO_POWER - H1940_LATCH_GPIO(0),
-			    "speaker-power", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOG", 4, "hp", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device h1940_audio = {
-	.name = "h1940-audio",
-	.id   = -1,
-};
-
-static struct pwm_lookup h1940_pwm_lookup[] = {
-	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 36296,
-		   PWM_POLARITY_NORMAL),
-};
-
-static int h1940_backlight_init(struct device *dev)
-{
-	gpio_request(S3C2410_GPB(0), "Backlight");
-
-	gpio_direction_output(S3C2410_GPB(0), 0);
-	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
-	s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
-	gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
-
-	return 0;
-}
-
-static int h1940_backlight_notify(struct device *dev, int brightness)
-{
-	if (!brightness) {
-		gpio_direction_output(S3C2410_GPB(0), 1);
-		gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
-	} else {
-		gpio_direction_output(S3C2410_GPB(0), 0);
-		s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
-		gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
-	}
-	return brightness;
-}
-
-static void h1940_backlight_exit(struct device *dev)
-{
-	gpio_direction_output(S3C2410_GPB(0), 1);
-	gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
-}
-
-
-static struct platform_pwm_backlight_data backlight_data = {
-	.max_brightness = 100,
-	.dft_brightness = 50,
-	.init           = h1940_backlight_init,
-	.notify		= h1940_backlight_notify,
-	.exit           = h1940_backlight_exit,
-};
-
-static struct platform_device h1940_backlight = {
-	.name = "pwm-backlight",
-	.dev  = {
-		.parent = &samsung_device_pwm.dev,
-		.platform_data = &backlight_data,
-	},
-	.id   = -1,
-};
-
-static void h1940_lcd_power_set(struct plat_lcd_data *pd,
-					unsigned int power)
-{
-	int value, retries = 100;
-
-	if (!power) {
-		gpio_set_value(S3C2410_GPC(0), 0);
-		/* wait for 3ac */
-		do {
-			value = gpio_get_value(S3C2410_GPC(6));
-		} while (value && retries--);
-
-		gpio_set_value(H1940_LATCH_LCD_P2, 0);
-		gpio_set_value(H1940_LATCH_LCD_P3, 0);
-		gpio_set_value(H1940_LATCH_LCD_P4, 0);
-
-		gpio_direction_output(S3C2410_GPC(1), 0);
-		gpio_direction_output(S3C2410_GPC(4), 0);
-
-		gpio_set_value(H1940_LATCH_LCD_P1, 0);
-		gpio_set_value(H1940_LATCH_LCD_P0, 0);
-
-		gpio_set_value(S3C2410_GPC(5), 0);
-
-	} else {
-		gpio_set_value(H1940_LATCH_LCD_P0, 1);
-		gpio_set_value(H1940_LATCH_LCD_P1, 1);
-
-		gpio_direction_input(S3C2410_GPC(1));
-		gpio_direction_input(S3C2410_GPC(4));
-		mdelay(10);
-		s3c_gpio_cfgpin(S3C2410_GPC(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S3C2410_GPC(4), S3C_GPIO_SFN(2));
-
-		gpio_set_value(S3C2410_GPC(5), 1);
-		gpio_set_value(S3C2410_GPC(0), 1);
-
-		gpio_set_value(H1940_LATCH_LCD_P3, 1);
-		gpio_set_value(H1940_LATCH_LCD_P2, 1);
-		gpio_set_value(H1940_LATCH_LCD_P4, 1);
-	}
-}
-
-static struct plat_lcd_data h1940_lcd_power_data = {
-	.set_power      = h1940_lcd_power_set,
-};
-
-static struct platform_device h1940_lcd_powerdev = {
-	.name                   = "platform-lcd",
-	.dev.parent             = &s3c_device_lcd.dev,
-	.dev.platform_data      = &h1940_lcd_power_data,
-};
-
-static struct uda1380_platform_data uda1380_info = {
-	.gpio_power	= H1940_LATCH_UDA_POWER,
-	.gpio_reset	= S3C2410_GPA(12),
-	.dac_clk	= UDA1380_DAC_CLK_SYSCLK,
-};
-
-static struct i2c_board_info h1940_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("uda1380", 0x1a),
-		.platform_data = &uda1380_info,
-	},
-};
-
-#define DECLARE_BUTTON(p, k, n, w)	\
-	{				\
-		.gpio		= p,	\
-		.code		= k,	\
-		.desc		= n,	\
-		.wakeup		= w,	\
-		.active_low	= 1,	\
-	}
-
-static struct gpio_keys_button h1940_buttons[] = {
-	DECLARE_BUTTON(S3C2410_GPF(0),       KEY_POWER,          "Power", 1),
-	DECLARE_BUTTON(S3C2410_GPF(6),       KEY_ENTER,         "Select", 1),
-	DECLARE_BUTTON(S3C2410_GPF(7),      KEY_RECORD,         "Record", 0),
-	DECLARE_BUTTON(S3C2410_GPG(0),         KEY_F11,       "Calendar", 0),
-	DECLARE_BUTTON(S3C2410_GPG(2),         KEY_F12,       "Contacts", 0),
-	DECLARE_BUTTON(S3C2410_GPG(3),        KEY_MAIL,           "Mail", 0),
-	DECLARE_BUTTON(S3C2410_GPG(6),        KEY_LEFT,     "Left_arrow", 0),
-	DECLARE_BUTTON(S3C2410_GPG(7),    KEY_HOMEPAGE,           "Home", 0),
-	DECLARE_BUTTON(S3C2410_GPG(8),       KEY_RIGHT,    "Right_arrow", 0),
-	DECLARE_BUTTON(S3C2410_GPG(9),          KEY_UP,       "Up_arrow", 0),
-	DECLARE_BUTTON(S3C2410_GPG(10),       KEY_DOWN,     "Down_arrow", 0),
-};
-
-static struct gpio_keys_platform_data h1940_buttons_data = {
-	.buttons	= h1940_buttons,
-	.nbuttons	= ARRAY_SIZE(h1940_buttons),
-};
-
-static struct platform_device h1940_dev_buttons = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data  = &h1940_buttons_data,
-	}
-};
-
-static struct platform_device *h1940_devices[] __initdata = {
-	&h1940_dev_buttons,
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_usbgadget,
-	&h1940_device_leds,
-	&h1940_device_bluetooth,
-	&s3c_device_sdi,
-	&s3c_device_rtc,
-	&samsung_device_pwm,
-	&h1940_backlight,
-	&h1940_lcd_powerdev,
-	&s3c_device_adc,
-	&s3c_device_ts,
-	&power_supply,
-	&h1940_battery,
-	&h1940_audio,
-};
-
-static void __init h1940_map_io(void)
-{
-	s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
-	s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-
-	/* setup PM */
-
-#ifdef CONFIG_PM_H1940
-	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
-#endif
-	s3c_pm_init();
-
-	/* Add latch gpio chip, set latch initial value */
-	h1940_latch_control(0, 0);
-	WARN_ON(gpiochip_add_data(&h1940_latch_gpiochip, NULL));
-}
-
-static void __init h1940_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-/* H1940 and RX3715 need to reserve this for suspend */
-static void __init h1940_reserve(void)
-{
-	memblock_reserve(0x30003000, 0x1000);
-	memblock_reserve(0x30081000, 0x1000);
-}
-
-static void __init h1940_init(void)
-{
-	u32 tmp;
-
-	s3c24xx_fb_set_platdata(&h1940_fb_info);
-	gpiod_add_lookup_table(&h1940_mmc_gpio_table);
-	gpiod_add_lookup_table(&h1940_audio_gpio_table);
-	gpiod_add_lookup_table(&h1940_bat_gpio_table);
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-	s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
- 	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
-	s3c24xx_ts_set_platdata(&h1940_ts_cfg);
-	s3c_i2c0_set_platdata(NULL);
-
-	/* Turn off suspend on both USB ports, and switch the
-	 * selectable USB port to USB device mode. */
-
-	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-			      S3C2410_MISCCR_USBSUSPND0 |
-			      S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-	tmp =   (0x78 << S3C24XX_PLL_MDIV_SHIFT)
-	      | (0x02 << S3C24XX_PLL_PDIV_SHIFT)
-	      | (0x03 << S3C24XX_PLL_SDIV_SHIFT);
-	writel(tmp, S3C2410_UPLLCON);
-
-	gpio_request(S3C2410_GPC(0), "LCD power");
-	gpio_request(S3C2410_GPC(1), "LCD power");
-	gpio_request(S3C2410_GPC(4), "LCD power");
-	gpio_request(S3C2410_GPC(5), "LCD power");
-	gpio_request(S3C2410_GPC(6), "LCD power");
-	gpio_request(H1940_LATCH_LCD_P0, "LCD power");
-	gpio_request(H1940_LATCH_LCD_P1, "LCD power");
-	gpio_request(H1940_LATCH_LCD_P2, "LCD power");
-	gpio_request(H1940_LATCH_LCD_P3, "LCD power");
-	gpio_request(H1940_LATCH_LCD_P4, "LCD power");
-	gpio_request(H1940_LATCH_MAX1698_nSHUTDOWN, "LCD power");
-	gpio_direction_output(S3C2410_GPC(0), 0);
-	gpio_direction_output(S3C2410_GPC(1), 0);
-	gpio_direction_output(S3C2410_GPC(4), 0);
-	gpio_direction_output(S3C2410_GPC(5), 0);
-	gpio_direction_input(S3C2410_GPC(6));
-	gpio_direction_output(H1940_LATCH_LCD_P0, 0);
-	gpio_direction_output(H1940_LATCH_LCD_P1, 0);
-	gpio_direction_output(H1940_LATCH_LCD_P2, 0);
-	gpio_direction_output(H1940_LATCH_LCD_P3, 0);
-	gpio_direction_output(H1940_LATCH_LCD_P4, 0);
-	gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
-
-	gpio_request(H1940_LATCH_SD_POWER, "SD power");
-	gpio_direction_output(H1940_LATCH_SD_POWER, 0);
-
-	pwm_add_table(h1940_pwm_lookup, ARRAY_SIZE(h1940_pwm_lookup));
-	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
-
-	gpio_request(S3C2410_GPA(1), "Red LED blink");
-	gpio_request(S3C2410_GPA(3), "Blue LED blink");
-	gpio_request(S3C2410_GPA(7), "Green LED blink");
-	gpio_request(H1940_LATCH_LED_FLASH, "LED blink");
-	gpio_direction_output(S3C2410_GPA(1), 0);
-	gpio_direction_output(S3C2410_GPA(3), 0);
-	gpio_direction_output(S3C2410_GPA(7), 0);
-	gpio_direction_output(H1940_LATCH_LED_FLASH, 0);
-
-	i2c_register_board_info(0, h1940_i2c_devices,
-		ARRAY_SIZE(h1940_i2c_devices));
-}
-
-MACHINE_START(H1940, "IPAQ-H1940")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.map_io		= h1940_map_io,
-	.reserve	= h1940_reserve,
-	.init_irq	= s3c2410_init_irq,
-	.init_machine	= h1940_init,
-	.init_time	= h1940_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-hmt.c b/arch/arm/mach-s3c/mach-hmt.c
deleted file mode 100644
index 49ba16c447aa..000000000000
--- a/arch/arm/mach-s3c/mach-hmt.c
+++ /dev/null
@@ -1,282 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// mach-hmt.c - Platform code for Airgoo HMT
-//
-// Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/leds.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <video/samsung_fimd.h>
-#include "map.h"
-#include "irqs.h"
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "gpio-samsung.h"
-#include "fb.h"
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-
-#include "devs.h"
-#include "cpu.h"
-
-#include "s3c64xx.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-};
-
-static struct pwm_lookup hmt_pwm_lookup[] = {
-	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
-		   1000000000 / (100 * 256 * 20), PWM_POLARITY_NORMAL),
-};
-
-static int hmt_bl_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
-	if (!ret)
-		ret = gpio_direction_output(S3C64XX_GPB(4), 0);
-
-	return ret;
-}
-
-static int hmt_bl_notify(struct device *dev, int brightness)
-{
-	/*
-	 * translate from CIELUV/CIELAB L*->brightness, E.G. from
-	 * perceived luminance to light output. Assumes range 0..25600
-	 */
-	if (brightness < 0x800) {
-		/* Y = Yn * L / 903.3 */
-		brightness = (100*256 * brightness + 231245/2) / 231245;
-	} else {
-		/* Y = Yn * ((L + 16) / 116 )^3 */
-		int t = (brightness*4 + 16*1024 + 58)/116;
-		brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
-	}
-
-	gpio_set_value(S3C64XX_GPB(4), brightness);
-
-	return brightness;
-}
-
-static void hmt_bl_exit(struct device *dev)
-{
-	gpio_free(S3C64XX_GPB(4));
-}
-
-static struct platform_pwm_backlight_data hmt_backlight_data = {
-	.max_brightness	= 100 * 256,
-	.dft_brightness	= 40 * 256,
-	.init		= hmt_bl_init,
-	.notify		= hmt_bl_notify,
-	.exit		= hmt_bl_exit,
-
-};
-
-static struct platform_device hmt_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent	= &samsung_device_pwm.dev,
-		.platform_data = &hmt_backlight_data,
-	},
-};
-
-static struct s3c_fb_pd_win hmt_fb_win0 = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct fb_videomode hmt_lcd_timing = {
-	.left_margin	= 8,
-	.right_margin	= 13,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-	.hsync_len	= 3,
-	.vsync_len	= 1,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.vtiming	= &hmt_lcd_timing,
-	.win[0]		= &hmt_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-static struct mtd_partition hmt_nand_part[] = {
-	[0] = {
-		.name	= "uboot",
-		.size	= SZ_512K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "uboot-env1",
-		.size	= SZ_256K,
-		.offset	= SZ_512K,
-	},
-	[2] = {
-		.name	= "uboot-env2",
-		.size	= SZ_256K,
-		.offset	= SZ_512K + SZ_256K,
-	},
-	[3] = {
-		.name	= "kernel",
-		.size	= SZ_2M,
-		.offset	= SZ_1M,
-	},
-	[4] = {
-		.name	= "rootfs",
-		.size	= MTDPART_SIZ_FULL,
-		.offset	= SZ_1M + SZ_2M,
-	},
-};
-
-static struct s3c2410_nand_set hmt_nand_sets[] = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(hmt_nand_part),
-		.partitions	= hmt_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand hmt_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(hmt_nand_sets),
-	.sets		= hmt_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-static struct gpio_led hmt_leds[] = {
-	{ /* left function keys */
-		.name			= "left:blue",
-		.gpio			= S3C64XX_GPO(12),
-		.default_trigger	= "default-on",
-	},
-	{ /* right function keys - red */
-		.name			= "right:red",
-		.gpio			= S3C64XX_GPO(13),
-	},
-	{ /* right function keys - green */
-		.name			= "right:green",
-		.gpio			= S3C64XX_GPO(14),
-	},
-	{ /* right function keys - blue */
-		.name			= "right:blue",
-		.gpio			= S3C64XX_GPO(15),
-		.default_trigger	= "default-on",
-	},
-};
-
-static struct gpio_led_platform_data hmt_led_data = {
-	.num_leds = ARRAY_SIZE(hmt_leds),
-	.leds = hmt_leds,
-};
-
-static struct platform_device hmt_leds_device = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &hmt_led_data,
-};
-
-static struct map_desc hmt_iodesc[] = {};
-
-static struct platform_device *hmt_devices[] __initdata = {
-	&s3c_device_i2c0,
-	&s3c_device_nand,
-	&s3c_device_fb,
-	&s3c_device_ohci,
-	&samsung_device_pwm,
-	&hmt_backlight_device,
-	&hmt_leds_device,
-};
-
-static void __init hmt_map_io(void)
-{
-	s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
-	s3c64xx_set_xtal_freq(12000000);
-	s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
-	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
-}
-
-static void __init hmt_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	s3c_fb_set_platdata(&hmt_lcd_pdata);
-	s3c_nand_set_platdata(&hmt_nand_info);
-
-	gpio_request(S3C64XX_GPC(7), "usb power");
-	gpio_direction_output(S3C64XX_GPC(7), 0);
-	gpio_request(S3C64XX_GPM(0), "usb power");
-	gpio_direction_output(S3C64XX_GPM(0), 1);
-	gpio_request(S3C64XX_GPK(7), "usb power");
-	gpio_direction_output(S3C64XX_GPK(7), 1);
-	gpio_request(S3C64XX_GPF(13), "usb power");
-	gpio_direction_output(S3C64XX_GPF(13), 1);
-
-	pwm_add_table(hmt_pwm_lookup, ARRAY_SIZE(hmt_pwm_lookup));
-	platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
-}
-
-MACHINE_START(HMT, "Airgoo-HMT")
-	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= hmt_map_io,
-	.init_machine	= hmt_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-jive.c b/arch/arm/mach-s3c/mach-jive.c
deleted file mode 100644
index e32773175944..000000000000
--- a/arch/arm/mach-s3c/mach-jive.c
+++ /dev/null
@@ -1,685 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2007 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// http://armlinux.simtec.co.uk/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-
-#include <video/ili9320.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "hardware-s3c24xx.h"
-#include "regs-gpio.h"
-#include <linux/platform_data/fb-s3c2410.h>
-#include "gpio-samsung.h"
-
-#include <asm/mach-types.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-
-#include "gpio-cfg.h"
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
-#include <linux/platform_data/usb-s3c2410_udc.h>
-
-#include "s3c24xx.h"
-#include "s3c2412-power.h"
-
-static struct map_desc jive_iodesc[] __initdata = {
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg jive_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* Jive flash assignment
- *
- * 0x00000000-0x00028000 : uboot
- * 0x00028000-0x0002c000 : uboot env
- * 0x0002c000-0x00030000 : spare
- * 0x00030000-0x00200000 : zimage A
- * 0x00200000-0x01600000 : cramfs A
- * 0x01600000-0x017d0000 : zimage B
- * 0x017d0000-0x02bd0000 : cramfs B
- * 0x02bd0000-0x03fd0000 : yaffs
- */
-static struct mtd_partition __initdata jive_imageA_nand_part[] = {
-
-#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
-	/* Don't allow access to the bootloader from linux */
-	{
-		.name           = "uboot",
-		.offset         = 0,
-		.size           = (160 * SZ_1K),
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-
-	/* spare */
-        {
-                .name           = "spare",
-                .offset         = (176 * SZ_1K),
-                .size           = (16 * SZ_1K),
-        },
-#endif
-
-	/* booted images */
-        {
-		.name		= "kernel (ro)",
-		.offset		= (192 * SZ_1K),
-		.size		= (SZ_2M) - (192 * SZ_1K),
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-        }, {
-                .name           = "root (ro)",
-                .offset         = (SZ_2M),
-                .size           = (20 * SZ_1M),
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-        },
-
-	/* yaffs */
-	{
-		.name		= "yaffs",
-		.offset		= (44 * SZ_1M),
-		.size		= (20 * SZ_1M),
-	},
-
-	/* bootloader environment */
-	{
-                .name		= "env",
-		.offset		= (160 * SZ_1K),
-		.size		= (16 * SZ_1K),
-	},
-
-	/* upgrade images */
-        {
-		.name		= "zimage",
-		.offset		= (22 * SZ_1M),
-		.size		= (2 * SZ_1M) - (192 * SZ_1K),
-        }, {
-		.name		= "cramfs",
-		.offset		= (24 * SZ_1M) - (192*SZ_1K),
-		.size		= (20 * SZ_1M),
-        },
-};
-
-static struct mtd_partition __initdata jive_imageB_nand_part[] = {
-
-#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
-	/* Don't allow access to the bootloader from linux */
-	{
-		.name           = "uboot",
-		.offset         = 0,
-		.size           = (160 * SZ_1K),
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-
-	/* spare */
-        {
-                .name           = "spare",
-                .offset         = (176 * SZ_1K),
-                .size           = (16 * SZ_1K),
-        },
-#endif
-
-	/* booted images */
-        {
-		.name           = "kernel (ro)",
-		.offset         = (22 * SZ_1M),
-		.size           = (2 * SZ_1M) - (192 * SZ_1K),
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-        },
-	{
-		.name		= "root (ro)",
-		.offset		= (24 * SZ_1M) - (192 * SZ_1K),
-                .size		= (20 * SZ_1M),
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-
-	/* yaffs */
-	{
-		.name		= "yaffs",
-		.offset		= (44 * SZ_1M),
-		.size		= (20 * SZ_1M),
-        },
-
-	/* bootloader environment */
-	{
-		.name		= "env",
-		.offset		= (160 * SZ_1K),
-		.size		= (16 * SZ_1K),
-	},
-
-	/* upgrade images */
-	{
-		.name		= "zimage",
-		.offset		= (192 * SZ_1K),
-		.size		= (2 * SZ_1M) - (192 * SZ_1K),
-        }, {
-		.name		= "cramfs",
-		.offset		= (2 * SZ_1M),
-		.size		= (20 * SZ_1M),
-        },
-};
-
-static struct s3c2410_nand_set __initdata jive_nand_sets[] = {
-	[0] = {
-		.name           = "flash",
-		.nr_chips       = 1,
-		.nr_partitions  = ARRAY_SIZE(jive_imageA_nand_part),
-		.partitions     = jive_imageA_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand __initdata jive_nand_info = {
-	/* set taken from osiris nand timings, possibly still conservative */
-	.tacls		= 30,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.sets		= jive_nand_sets,
-	.nr_sets	= ARRAY_SIZE(jive_nand_sets),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-static int __init jive_mtdset(char *options)
-{
-	struct s3c2410_nand_set *nand = &jive_nand_sets[0];
-	unsigned long set;
-
-	if (options == NULL || options[0] == '\0')
-		return 1;
-
-	if (kstrtoul(options, 10, &set)) {
-		printk(KERN_ERR "failed to parse mtdset=%s\n", options);
-		return 1;
-	}
-
-	switch (set) {
-	case 1:
-		nand->nr_partitions = ARRAY_SIZE(jive_imageB_nand_part);
-		nand->partitions = jive_imageB_nand_part;
-		break;
-	case 0:
-		/* this is already setup in the nand info */
-		break;
-	default:
-		printk(KERN_ERR "Unknown mtd set %ld specified,"
-		       "using default.", set);
-	}
-
-	return 1;
-}
-
-/* parse the mtdset= option given to the kernel command line */
-__setup("mtdset=", jive_mtdset);
-
-/* LCD timing and setup */
-
-#define LCD_XRES	 (240)
-#define LCD_YRES	 (320)
-#define LCD_LEFT_MARGIN  (12)
-#define LCD_RIGHT_MARGIN (12)
-#define LCD_LOWER_MARGIN (12)
-#define LCD_UPPER_MARGIN (12)
-#define LCD_VSYNC	 (2)
-#define LCD_HSYNC	 (2)
-
-#define LCD_REFRESH	 (60)
-
-#define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
-#define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
-
-static struct s3c2410fb_display jive_vgg2432a4_display[] = {
-	[0] = {
-		.width		= LCD_XRES,
-		.height		= LCD_YRES,
-		.xres		= LCD_XRES,
-		.yres		= LCD_YRES,
-		.left_margin	= LCD_LEFT_MARGIN,
-		.right_margin	= LCD_RIGHT_MARGIN,
-		.upper_margin	= LCD_UPPER_MARGIN,
-		.lower_margin	= LCD_LOWER_MARGIN,
-		.hsync_len	= LCD_HSYNC,
-		.vsync_len	= LCD_VSYNC,
-
-		.pixclock	= (1000000000000LL /
-				   (LCD_REFRESH * LCD_HTOT * LCD_VTOT)),
-
-		.bpp		= 16,
-		.type		= (S3C2410_LCDCON1_TFT16BPP |
-				   S3C2410_LCDCON1_TFT),
-
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_INVVLINE |
-				   S3C2410_LCDCON5_INVVFRAME |
-				   S3C2410_LCDCON5_INVVDEN |
-				   S3C2410_LCDCON5_PWREN),
-	},
-};
-
-/* todo - put into gpio header */
-
-#define S3C2410_GPCCON_MASK(x)	(3 << ((x) * 2))
-#define S3C2410_GPDCON_MASK(x)	(3 << ((x) * 2))
-
-static struct s3c2410fb_mach_info jive_lcd_config = {
-	.displays	 = jive_vgg2432a4_display,
-	.num_displays	 = ARRAY_SIZE(jive_vgg2432a4_display),
-	.default_display = 0,
-
-	/* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
-	 * and disable the pull down resistors on pins we are using for LCD
-	 * data. */
-
-	.gpcup		= (0xf << 1) | (0x3f << 10),
-	.gpcup_reg	= S3C2410_GPCUP,
-
-	.gpccon		= (S3C2410_GPC1_VCLK   | S3C2410_GPC2_VLINE |
-			   S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
-			   S3C2410_GPC10_VD2   | S3C2410_GPC11_VD3 |
-			   S3C2410_GPC12_VD4   | S3C2410_GPC13_VD5 |
-			   S3C2410_GPC14_VD6   | S3C2410_GPC15_VD7),
-
-	.gpccon_mask	= (S3C2410_GPCCON_MASK(1)  | S3C2410_GPCCON_MASK(2)  |
-			   S3C2410_GPCCON_MASK(3)  | S3C2410_GPCCON_MASK(4)  |
-			   S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
-			   S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
-			   S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
-
-	.gpccon_reg	= S3C2410_GPCCON,
-
-	.gpdup		= (0x3f << 2) | (0x3f << 10),
-
-	.gpdup_reg	= S3C2410_GPDUP,
-
-	.gpdcon		= (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
-			   S3C2410_GPD4_VD12  | S3C2410_GPD5_VD13 |
-			   S3C2410_GPD6_VD14  | S3C2410_GPD7_VD15 |
-			   S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
-			   S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
-			   S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
-
-	.gpdcon_mask	= (S3C2410_GPDCON_MASK(2)  | S3C2410_GPDCON_MASK(3) |
-			   S3C2410_GPDCON_MASK(4)  | S3C2410_GPDCON_MASK(5) |
-			   S3C2410_GPDCON_MASK(6)  | S3C2410_GPDCON_MASK(7) |
-			   S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
-			   S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
-			   S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
-
-	.gpdcon_reg	= S3C2410_GPDCON,
-};
-
-/* ILI9320 support. */
-
-static void jive_lcm_reset(unsigned int set)
-{
-	printk(KERN_DEBUG "%s(%d)\n", __func__, set);
-
-	gpio_set_value(S3C2410_GPG(13), set);
-}
-
-#undef LCD_UPPER_MARGIN
-#define LCD_UPPER_MARGIN 2
-
-static struct ili9320_platdata jive_lcm_config = {
-	.hsize		= LCD_XRES,
-	.vsize		= LCD_YRES,
-
-	.reset		= jive_lcm_reset,
-	.suspend	= ILI9320_SUSPEND_DEEP,
-
-	.entry_mode	= ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,
-	.display2	= (ILI9320_DISPLAY2_FP(LCD_UPPER_MARGIN) |
-			   ILI9320_DISPLAY2_BP(LCD_LOWER_MARGIN)),
-	.display3	= 0x0,
-	.display4	= 0x0,
-	.rgb_if1	= (ILI9320_RGBIF1_RIM_RGB18 |
-			   ILI9320_RGBIF1_RM | ILI9320_RGBIF1_CLK_RGBIF),
-	.rgb_if2	= ILI9320_RGBIF2_DPL,
-	.interface2	= 0x0,
-	.interface3	= 0x3,
-	.interface4	= (ILI9320_INTERFACE4_RTNE(16) |
-			   ILI9320_INTERFACE4_DIVE(1)),
-	.interface5	= 0x0,
-	.interface6	= 0x0,
-};
-
-/* LCD SPI support */
-
-static struct spi_gpio_platform_data jive_lcd_spi = {
-	.num_chipselect	= 1,
-};
-
-static struct platform_device jive_device_lcdspi = {
-	.name		= "spi_gpio",
-	.id		= 1,
-	.dev.platform_data = &jive_lcd_spi,
-};
-
-static struct gpiod_lookup_table jive_lcdspi_gpiod_table = {
-	.dev_id         = "spi_gpio",
-	.table          = {
-		GPIO_LOOKUP("GPIOG", 8,
-			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOB", 8,
-			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOB", 7,
-			    "cs", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* WM8750 audio code SPI definition */
-
-static struct spi_gpio_platform_data jive_wm8750_spi = {
-	.num_chipselect	= 1,
-};
-
-static struct platform_device jive_device_wm8750 = {
-	.name		= "spi_gpio",
-	.id		= 2,
-	.dev.platform_data = &jive_wm8750_spi,
-};
-
-static struct gpiod_lookup_table jive_wm8750_gpiod_table = {
-	.dev_id         = "spi_gpio",
-	.table          = {
-		GPIO_LOOKUP("GPIOB", 4,
-			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOB", 9,
-			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOH", 10,
-			    "cs", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* JIVE SPI devices. */
-
-static struct spi_board_info __initdata jive_spi_devs[] = {
-	[0] = {
-		.modalias	= "VGG2432A4",
-		.bus_num	= 1,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_3,	/* CPOL=1, CPHA=1 */
-		.max_speed_hz	= 100000,
-		.platform_data	= &jive_lcm_config,
-	}, {
-		.modalias	= "WM8750",
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,	/* CPOL=0, CPHA=0 */
-		.max_speed_hz	= 100000,
-	},
-};
-
-/* I2C bus and device configuration. */
-
-static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = {
-	.frequency	= 80 * 1000,
-	.flags		= S3C_IICFLG_FILTER,
-	.sda_delay	= 2,
-};
-
-static struct i2c_board_info jive_i2c_devs[] __initdata = {
-	[0] = {
-		I2C_BOARD_INFO("lis302dl", 0x1c),
-		.irq	= IRQ_EINT14,
-	},
-};
-
-/* The platform devices being used. */
-
-static struct platform_device *jive_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_lcd,
-	&jive_device_lcdspi,
-	&jive_device_wm8750,
-	&s3c_device_nand,
-	&s3c_device_usbgadget,
-	&s3c2412_device_dma,
-};
-
-static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
-	.vbus_pin	= S3C2410_GPG(1),		/* detect is on GPG1 */
-};
-
-/* Jive power management device */
-
-#ifdef CONFIG_PM
-static int jive_pm_suspend(void)
-{
-	/* Write the magic value u-boot uses to check for resume into
-	 * the INFORM0 register, and ensure INFORM1 is set to the
-	 * correct address to resume from. */
-
-	__raw_writel(0x2BED, S3C2412_INFORM0);
-	__raw_writel(__pa_symbol(s3c_cpu_resume), S3C2412_INFORM1);
-
-	return 0;
-}
-
-static void jive_pm_resume(void)
-{
-	__raw_writel(0x0, S3C2412_INFORM0);
-}
-
-#else
-#define jive_pm_suspend NULL
-#define jive_pm_resume NULL
-#endif
-
-static struct syscore_ops jive_pm_syscore_ops = {
-	.suspend	= jive_pm_suspend,
-	.resume		= jive_pm_resume,
-};
-
-static void __init jive_map_io(void)
-{
-	s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
-	s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init jive_init_time(void)
-{
-	s3c2412_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void jive_power_off(void)
-{
-	printk(KERN_INFO "powering system down...\n");
-
-	gpio_request_one(S3C2410_GPC(5), GPIOF_OUT_INIT_HIGH, NULL);
-	gpio_free(S3C2410_GPC(5));
-}
-
-static void __init jive_machine_init(void)
-{
-	/* register system core operations for managing low level suspend */
-
-	register_syscore_ops(&jive_pm_syscore_ops);
-
-	/* write our sleep configurations for the IO. Pull down all unused
-	 * IO, ensure that we have turned off all peripherals we do not
-	 * need, and configure the ones we do need. */
-
-	/* Port B sleep */
-
-	__raw_writel(S3C2412_SLPCON_IN(0)   |
-		     S3C2412_SLPCON_PULL(1) |
-		     S3C2412_SLPCON_HIGH(2) |
-		     S3C2412_SLPCON_PULL(3) |
-		     S3C2412_SLPCON_PULL(4) |
-		     S3C2412_SLPCON_PULL(5) |
-		     S3C2412_SLPCON_PULL(6) |
-		     S3C2412_SLPCON_HIGH(7) |
-		     S3C2412_SLPCON_PULL(8) |
-		     S3C2412_SLPCON_PULL(9) |
-		     S3C2412_SLPCON_PULL(10), S3C2412_GPBSLPCON);
-
-	/* Port C sleep */
-
-	__raw_writel(S3C2412_SLPCON_PULL(0) |
-		     S3C2412_SLPCON_PULL(1) |
-		     S3C2412_SLPCON_PULL(2) |
-		     S3C2412_SLPCON_PULL(3) |
-		     S3C2412_SLPCON_PULL(4) |
-		     S3C2412_SLPCON_PULL(5) |
-		     S3C2412_SLPCON_LOW(6)  |
-		     S3C2412_SLPCON_PULL(6) |
-		     S3C2412_SLPCON_PULL(7) |
-		     S3C2412_SLPCON_PULL(8) |
-		     S3C2412_SLPCON_PULL(9) |
-		     S3C2412_SLPCON_PULL(10) |
-		     S3C2412_SLPCON_PULL(11) |
-		     S3C2412_SLPCON_PULL(12) |
-		     S3C2412_SLPCON_PULL(13) |
-		     S3C2412_SLPCON_PULL(14) |
-		     S3C2412_SLPCON_PULL(15), S3C2412_GPCSLPCON);
-
-	/* Port D sleep */
-
-	__raw_writel(S3C2412_SLPCON_ALL_PULL, S3C2412_GPDSLPCON);
-
-	/* Port F sleep */
-
-	__raw_writel(S3C2412_SLPCON_LOW(0)  |
-		     S3C2412_SLPCON_LOW(1)  |
-		     S3C2412_SLPCON_LOW(2)  |
-		     S3C2412_SLPCON_EINT(3) |
-		     S3C2412_SLPCON_EINT(4) |
-		     S3C2412_SLPCON_EINT(5) |
-		     S3C2412_SLPCON_EINT(6) |
-		     S3C2412_SLPCON_EINT(7), S3C2412_GPFSLPCON);
-
-	/* Port G sleep */
-
-	__raw_writel(S3C2412_SLPCON_IN(0)    |
-		     S3C2412_SLPCON_IN(1)    |
-		     S3C2412_SLPCON_IN(2)    |
-		     S3C2412_SLPCON_IN(3)    |
-		     S3C2412_SLPCON_IN(4)    |
-		     S3C2412_SLPCON_IN(5)    |
-		     S3C2412_SLPCON_IN(6)    |
-		     S3C2412_SLPCON_IN(7)    |
-		     S3C2412_SLPCON_PULL(8)  |
-		     S3C2412_SLPCON_PULL(9)  |
-		     S3C2412_SLPCON_IN(10)   |
-		     S3C2412_SLPCON_PULL(11) |
-		     S3C2412_SLPCON_PULL(12) |
-		     S3C2412_SLPCON_PULL(13) |
-		     S3C2412_SLPCON_IN(14)   |
-		     S3C2412_SLPCON_PULL(15), S3C2412_GPGSLPCON);
-
-	/* Port H sleep */
-
-	__raw_writel(S3C2412_SLPCON_PULL(0) |
-		     S3C2412_SLPCON_PULL(1) |
-		     S3C2412_SLPCON_PULL(2) |
-		     S3C2412_SLPCON_PULL(3) |
-		     S3C2412_SLPCON_PULL(4) |
-		     S3C2412_SLPCON_PULL(5) |
-		     S3C2412_SLPCON_PULL(6) |
-		     S3C2412_SLPCON_IN(7)   |
-		     S3C2412_SLPCON_IN(8)   |
-		     S3C2412_SLPCON_PULL(9) |
-		     S3C2412_SLPCON_IN(10), S3C2412_GPHSLPCON);
-
-	/* initialise the power management now we've setup everything. */
-
-	s3c_pm_init();
-
-	/** TODO - check that this is after the cmdline option! */
-	s3c_nand_set_platdata(&jive_nand_info);
-
-	gpio_request(S3C2410_GPG(13), "lcm reset");
-	gpio_direction_output(S3C2410_GPG(13), 0);
-
-	gpio_request_one(S3C2410_GPB(6), GPIOF_OUT_INIT_LOW, NULL);
-	gpio_free(S3C2410_GPB(6));
-
-	/* Turn off suspend on both USB ports, and switch the
-	 * selectable USB port to USB device mode. */
-
-	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-			      S3C2410_MISCCR_USBSUSPND0 |
-			      S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-	s3c24xx_udc_set_platdata(&jive_udc_cfg);
-	s3c24xx_fb_set_platdata(&jive_lcd_config);
-
-	spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
-
-	s3c_i2c0_set_platdata(&jive_i2c_cfg);
-	i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
-
-	pm_power_off = jive_power_off;
-
-	gpiod_add_lookup_table(&jive_lcdspi_gpiod_table);
-	gpiod_add_lookup_table(&jive_wm8750_gpiod_table);
-	platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
-}
-
-MACHINE_START(JIVE, "JIVE")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2412,
-	.init_irq	= s3c2412_init_irq,
-	.map_io		= jive_map_io,
-	.init_machine	= jive_machine_init,
-	.init_time	= jive_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-mini2440.c b/arch/arm/mach-s3c/mach-mini2440.c
deleted file mode 100644
index a6d17ffcdba1..000000000000
--- a/arch/arm/mach-s3c/mach-mini2440.c
+++ /dev/null
@@ -1,797 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
-//      Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
-//      and modifications by SBZ <sbz@spgui.org> and
-//      Weibing <http://weibing.blogbus.com> and
-//      Michel Pollet <buserror@gmail.com>
-//
-// For product information, visit https://code.google.com/p/mini2440/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/dm9000.h>
-#include <linux/property.h>
-#include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c.h>
-#include <linux/mmc/host.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include <asm/mach-types.h>
-
-#include "regs-gpio.h"
-#include <linux/platform_data/leds-s3c24xx.h>
-#include "irqs.h"
-#include "gpio-samsung.h"
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-
-#include "gpio-cfg.h"
-#include "devs.h"
-#include "cpu.h"
-
-#include <sound/s3c24xx_uda134x.h>
-
-#include "s3c24xx.h"
-
-#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
-
-static struct map_desc mini2440_iodesc[] __initdata = {
-	/* nothing to declare, move along */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-
-static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-};
-
-/* USB device UDC support */
-
-static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
-	.pullup_pin = S3C2410_GPC(5),
-};
-
-
-/* LCD timing and setup */
-
-/*
- * This macro simplifies the table bellow
- */
-#define _LCD_DECLARE(_clock, _xres, margin_left, margin_right, hsync, \
-			_yres, margin_top, margin_bottom, vsync, refresh) \
-	.width = _xres, \
-	.xres = _xres, \
-	.height = _yres, \
-	.yres = _yres, \
-	.left_margin	= margin_left,	\
-	.right_margin	= margin_right,	\
-	.upper_margin	= margin_top,	\
-	.lower_margin	= margin_bottom,	\
-	.hsync_len	= hsync,	\
-	.vsync_len	= vsync,	\
-	.pixclock	= ((_clock*100000000000LL) /	\
-			   ((refresh) * \
-			   (hsync + margin_left + _xres + margin_right) * \
-			   (vsync + margin_top + _yres + margin_bottom))), \
-	.bpp		= 16,\
-	.type		= (S3C2410_LCDCON1_TFT16BPP |\
-			   S3C2410_LCDCON1_TFT)
-
-static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
-	[0] = {	/* mini2440 + 3.5" TFT + touchscreen */
-		_LCD_DECLARE(
-			7,			/* The 3.5 is quite fast */
-			240, 21, 38, 6,		/* x timing */
-			320, 4, 4, 2,		/* y timing */
-			60),			/* refresh rate */
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_INVVLINE |
-				   S3C2410_LCDCON5_INVVFRAME |
-				   S3C2410_LCDCON5_INVVDEN |
-				   S3C2410_LCDCON5_PWREN),
-	},
-	[1] = { /* mini2440 + 7" TFT + touchscreen */
-		_LCD_DECLARE(
-			10,			/* the 7" runs slower */
-			800, 40, 40, 48,	/* x timing */
-			480, 29, 3, 3,		/* y timing */
-			50),			/* refresh rate */
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_INVVLINE |
-				   S3C2410_LCDCON5_INVVFRAME |
-				   S3C2410_LCDCON5_PWREN),
-	},
-	/* The VGA shield can outout at several resolutions. All share
-	 * the same timings, however, anything smaller than 1024x768
-	 * will only be displayed in the top left corner of a 1024x768
-	 * XGA output unless you add optional dip switches to the shield.
-	 * Therefore timings for other resolutions have been omitted here.
-	 */
-	[2] = {
-		_LCD_DECLARE(
-			10,
-			1024, 1, 2, 2,		/* y timing */
-			768, 200, 16, 16,	/* x timing */
-			24),	/* refresh rate, maximum stable,
-				 * tested with the FPGA shield
-				 */
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_HWSWP),
-	},
-	/* mini2440 + 3.5" TFT (LCD-W35i, LQ035Q1DG06 type) + touchscreen*/
-	[3] = {
-		_LCD_DECLARE(
-			/* clock */
-			7,
-			/* xres, margin_right, margin_left, hsync */
-			320, 68, 66, 4,
-			/* yres, margin_top, margin_bottom, vsync */
-			240, 4, 4, 9,
-			/* refresh rate */
-			60),
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_INVVDEN |
-				   S3C2410_LCDCON5_INVVFRAME |
-				   S3C2410_LCDCON5_INVVLINE |
-				   S3C2410_LCDCON5_INVVCLK |
-				   S3C2410_LCDCON5_HWSWP),
-	},
-};
-
-/* todo - put into gpio header */
-
-#define S3C2410_GPCCON_MASK(x)	(3 << ((x) * 2))
-#define S3C2410_GPDCON_MASK(x)	(3 << ((x) * 2))
-
-static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
-	.displays	 = &mini2440_lcd_cfg[0], /* not constant! see init */
-	.num_displays	 = 1,
-	.default_display = 0,
-
-	/* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
-	 * and disable the pull down resistors on pins we are using for LCD
-	 * data.
-	 */
-
-	.gpcup		= (0xf << 1) | (0x3f << 10),
-
-	.gpccon		= (S3C2410_GPC1_VCLK   | S3C2410_GPC2_VLINE |
-			   S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
-			   S3C2410_GPC10_VD2   | S3C2410_GPC11_VD3 |
-			   S3C2410_GPC12_VD4   | S3C2410_GPC13_VD5 |
-			   S3C2410_GPC14_VD6   | S3C2410_GPC15_VD7),
-
-	.gpccon_mask	= (S3C2410_GPCCON_MASK(1)  | S3C2410_GPCCON_MASK(2)  |
-			   S3C2410_GPCCON_MASK(3)  | S3C2410_GPCCON_MASK(4)  |
-			   S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
-			   S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
-			   S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
-
-	.gpccon_reg	= S3C2410_GPCCON,
-	.gpcup_reg	= S3C2410_GPCUP,
-
-	.gpdup		= (0x3f << 2) | (0x3f << 10),
-
-	.gpdcon		= (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
-			   S3C2410_GPD4_VD12  | S3C2410_GPD5_VD13 |
-			   S3C2410_GPD6_VD14  | S3C2410_GPD7_VD15 |
-			   S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
-			   S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
-			   S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
-
-	.gpdcon_mask	= (S3C2410_GPDCON_MASK(2)  | S3C2410_GPDCON_MASK(3) |
-			   S3C2410_GPDCON_MASK(4)  | S3C2410_GPDCON_MASK(5) |
-			   S3C2410_GPDCON_MASK(6)  | S3C2410_GPDCON_MASK(7) |
-			   S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
-			   S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
-			   S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
-
-	.gpdcon_reg	= S3C2410_GPDCON,
-	.gpdup_reg	= S3C2410_GPDUP,
-};
-
-/* MMC/SD  */
-
-static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
-	.wprotect_invert	= 1,
-	.set_power		= s3c24xx_mci_def_set_power,
-	.ocr_avail		= MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table mini2440_mmc_gpio_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* Card detect S3C2410_GPG(8) */
-		GPIO_LOOKUP("GPIOG", 8, "cd", GPIO_ACTIVE_LOW),
-		/* Write protect S3C2410_GPH(8) */
-		GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_HIGH),
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* NAND Flash on MINI2440 board */
-
-static struct mtd_partition mini2440_default_nand_part[] __initdata = {
-	[0] = {
-		.name	= "u-boot",
-		.size	= SZ_256K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "u-boot-env",
-		.size	= SZ_128K,
-		.offset	= SZ_256K,
-	},
-	[2] = {
-		.name	= "kernel",
-		/* 5 megabytes, for a kernel with no modules
-		 * or a uImage with a ramdisk attached
-		 */
-		.size	= 0x00500000,
-		.offset	= SZ_256K + SZ_128K,
-	},
-	[3] = {
-		.name	= "root",
-		.offset	= SZ_256K + SZ_128K + 0x00500000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(mini2440_default_nand_part),
-		.partitions	= mini2440_default_nand_part,
-		.flash_bbt	= 1, /* we use u-boot to create a BBT */
-	},
-};
-
-static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
-	.tacls		= 0,
-	.twrph0		= 25,
-	.twrph1		= 15,
-	.nr_sets	= ARRAY_SIZE(mini2440_nand_sets),
-	.sets		= mini2440_nand_sets,
-	.ignore_unset_ecc = 1,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource mini2440_dm9k_resource[] = {
-	[0] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE, 4),
-	[1] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE + 4, 4),
-	[2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ
-						| IORESOURCE_IRQ_HIGHEDGE),
-};
-
-/*
- * The DM9000 has no eeprom, and it's MAC address is set by
- * the bootloader before starting the kernel.
- */
-static struct dm9000_plat_data mini2440_dm9k_pdata = {
-	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device mini2440_device_eth = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mini2440_dm9k_resource),
-	.resource	= mini2440_dm9k_resource,
-	.dev		= {
-		.platform_data	= &mini2440_dm9k_pdata,
-	},
-};
-
-/*  CON5
- *	+--+	 /-----\
- *	|  |    |	|
- *	|  |	|  BAT	|
- *	|  |	 \_____/
- *	|  |
- *	|  |  +----+  +----+
- *	|  |  | K5 |  | K1 |
- *	|  |  +----+  +----+
- *	|  |  +----+  +----+
- *	|  |  | K4 |  | K2 |
- *	|  |  +----+  +----+
- *	|  |  +----+  +----+
- *	|  |  | K6 |  | K3 |
- *	|  |  +----+  +----+
- *	  .....
- */
-static struct gpio_keys_button mini2440_buttons[] = {
-	{
-		.gpio		= S3C2410_GPG(0),		/* K1 */
-		.code		= KEY_F1,
-		.desc		= "Button 1",
-		.active_low	= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(3),		/* K2 */
-		.code		= KEY_F2,
-		.desc		= "Button 2",
-		.active_low	= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(5),		/* K3 */
-		.code		= KEY_F3,
-		.desc		= "Button 3",
-		.active_low	= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(6),		/* K4 */
-		.code		= KEY_POWER,
-		.desc		= "Power",
-		.active_low	= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(7),		/* K5 */
-		.code		= KEY_F5,
-		.desc		= "Button 5",
-		.active_low	= 1,
-	},
-#if 0
-	/* this pin is also known as TCLK1 and seems to already
-	 * marked as "in use" somehow in the kernel -- possibly wrongly
-	 */
-	{
-		.gpio		= S3C2410_GPG(11),	/* K6 */
-		.code		= KEY_F6,
-		.desc		= "Button 6",
-		.active_low	= 1,
-	},
-#endif
-};
-
-static struct gpio_keys_platform_data mini2440_button_data = {
-	.buttons	= mini2440_buttons,
-	.nbuttons	= ARRAY_SIZE(mini2440_buttons),
-};
-
-static struct platform_device mini2440_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &mini2440_button_data,
-	}
-};
-
-/* LEDS */
-
-static struct gpiod_lookup_table mini2440_led1_gpio_table = {
-	.dev_id = "s3c24xx_led.1",
-	.table = {
-		GPIO_LOOKUP("GPB", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table mini2440_led2_gpio_table = {
-	.dev_id = "s3c24xx_led.2",
-	.table = {
-		GPIO_LOOKUP("GPB", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table mini2440_led3_gpio_table = {
-	.dev_id = "s3c24xx_led.3",
-	.table = {
-		GPIO_LOOKUP("GPB", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table mini2440_led4_gpio_table = {
-	.dev_id = "s3c24xx_led.4",
-	.table = {
-		GPIO_LOOKUP("GPB", 8, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table mini2440_backlight_gpio_table = {
-	.dev_id = "s3c24xx_led.5",
-	.table = {
-		GPIO_LOOKUP("GPG", 4, NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct s3c24xx_led_platdata mini2440_led1_pdata = {
-	.name		= "led1",
-	.def_trigger	= "heartbeat",
-};
-
-static struct s3c24xx_led_platdata mini2440_led2_pdata = {
-	.name		= "led2",
-	.def_trigger	= "nand-disk",
-};
-
-static struct s3c24xx_led_platdata mini2440_led3_pdata = {
-	.name		= "led3",
-	.def_trigger	= "mmc0",
-};
-
-static struct s3c24xx_led_platdata mini2440_led4_pdata = {
-	.name		= "led4",
-	.def_trigger	= "",
-};
-
-static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
-	.name		= "backlight",
-	.def_trigger	= "backlight",
-};
-
-static struct platform_device mini2440_led1 = {
-	.name		= "s3c24xx_led",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &mini2440_led1_pdata,
-	},
-};
-
-static struct platform_device mini2440_led2 = {
-	.name		= "s3c24xx_led",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &mini2440_led2_pdata,
-	},
-};
-
-static struct platform_device mini2440_led3 = {
-	.name		= "s3c24xx_led",
-	.id		= 3,
-	.dev		= {
-		.platform_data	= &mini2440_led3_pdata,
-	},
-};
-
-static struct platform_device mini2440_led4 = {
-	.name		= "s3c24xx_led",
-	.id		= 4,
-	.dev		= {
-		.platform_data	= &mini2440_led4_pdata,
-	},
-};
-
-static struct platform_device mini2440_led_backlight = {
-	.name		= "s3c24xx_led",
-	.id		= 5,
-	.dev		= {
-		.platform_data	= &mini2440_led_backlight_pdata,
-	},
-};
-
-/* AUDIO */
-
-static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
-	.l3_clk = S3C2410_GPB(4),
-	.l3_mode = S3C2410_GPB(2),
-	.l3_data = S3C2410_GPB(3),
-	.model = UDA134X_UDA1341
-};
-
-static struct platform_device mini2440_audio = {
-	.name		= "s3c24xx_uda134x",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &mini2440_audio_pins,
-	},
-};
-
-/*
- * I2C devices
- */
-static const struct property_entry mini2440_at24_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 16),
-	{ }
-};
-
-static const struct software_node mini2440_at24_node = {
-	.properties = mini2440_at24_properties,
-};
-
-static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("24c08", 0x50),
-		.swnode = &mini2440_at24_node,
-	},
-};
-
-static struct uda134x_platform_data s3c24xx_uda134x = {
-	.l3 = {
-		.gpio_clk = S3C2410_GPB(4),
-		.gpio_data = S3C2410_GPB(3),
-		.gpio_mode = S3C2410_GPB(2),
-		.use_gpios = 1,
-		.data_hold = 1,
-		.data_setup = 1,
-		.clock_high = 1,
-		.mode_hold = 1,
-		.mode = 1,
-		.mode_setup = 1,
-	},
-	.model = UDA134X_UDA1341,
-};
-
-static struct platform_device uda1340_codec = {
-		.name = "uda134x-codec",
-		.id = -1,
-		.dev = {
-			.platform_data	= &s3c24xx_uda134x,
-		},
-};
-
-static struct platform_device *mini2440_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_rtc,
-	&s3c_device_usbgadget,
-	&mini2440_device_eth,
-	&mini2440_led1,
-	&mini2440_led2,
-	&mini2440_led3,
-	&mini2440_led4,
-	&mini2440_button_device,
-	&s3c_device_nand,
-	&s3c_device_sdi,
-	&s3c2440_device_dma,
-	&s3c_device_iis,
-	&uda1340_codec,
-	&mini2440_audio,
-};
-
-static void __init mini2440_map_io(void)
-{
-	s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
-	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init mini2440_init_time(void)
-{
-	s3c2440_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-/*
- * mini2440_features string
- *
- * t = Touchscreen present
- * b = backlight control
- * c = camera [TODO]
- * 0-9 LCD configuration
- *
- */
-static char mini2440_features_str[12] __initdata = "0tb";
-
-static int __init mini2440_features_setup(char *str)
-{
-	if (str)
-		strscpy(mini2440_features_str, str,
-			sizeof(mini2440_features_str));
-	return 1;
-}
-
-__setup("mini2440=", mini2440_features_setup);
-
-#define FEATURE_SCREEN (1 << 0)
-#define FEATURE_BACKLIGHT (1 << 1)
-#define FEATURE_TOUCH (1 << 2)
-#define FEATURE_CAMERA (1 << 3)
-
-struct mini2440_features_t {
-	int count;
-	int done;
-	int lcd_index;
-	struct platform_device *optional[8];
-};
-
-static void __init mini2440_parse_features(
-		struct mini2440_features_t *features,
-		const char *features_str)
-{
-	const char *fp = features_str;
-
-	features->count = 0;
-	features->done = 0;
-	features->lcd_index = -1;
-
-	while (*fp) {
-		char f = *fp++;
-
-		switch (f) {
-		case '0'...'9':	/* tft screen */
-			if (features->done & FEATURE_SCREEN) {
-				pr_info("MINI2440: '%c' ignored, screen type already set\n",
-					f);
-			} else {
-				int li = f - '0';
-
-				if (li >= ARRAY_SIZE(mini2440_lcd_cfg))
-					pr_info("MINI2440: '%c' out of range LCD mode\n",
-						f);
-				else {
-					features->optional[features->count++] =
-							&s3c_device_lcd;
-					features->lcd_index = li;
-				}
-			}
-			features->done |= FEATURE_SCREEN;
-			break;
-		case 'b':
-			if (features->done & FEATURE_BACKLIGHT)
-				pr_info("MINI2440: '%c' ignored, backlight already set\n",
-					f);
-			else {
-				features->optional[features->count++] =
-						&mini2440_led_backlight;
-			}
-			features->done |= FEATURE_BACKLIGHT;
-			break;
-		case 't':
-			pr_info("MINI2440: '%c' ignored, touchscreen not compiled in\n",
-				f);
-			break;
-		case 'c':
-			if (features->done & FEATURE_CAMERA)
-				pr_info("MINI2440: '%c' ignored, camera already registered\n",
-					f);
-			else
-				features->optional[features->count++] =
-					&s3c_device_camif;
-			features->done |= FEATURE_CAMERA;
-			break;
-		}
-	}
-}
-
-static void __init mini2440_init(void)
-{
-	struct mini2440_features_t features = { 0 };
-	int i;
-
-	pr_info("MINI2440: Option string mini2440=%s\n",
-			mini2440_features_str);
-
-	/* Parse the feature string */
-	mini2440_parse_features(&features, mini2440_features_str);
-
-	/* turn LCD on */
-	s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
-
-	/* Turn the backlight early on */
-	WARN_ON(gpio_request_one(S3C2410_GPG(4), GPIOF_OUT_INIT_HIGH, NULL));
-	gpio_free(S3C2410_GPG(4));
-
-	/* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
-	gpio_request_one(S3C2410_GPB(1), GPIOF_IN, NULL);
-	s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
-	gpio_free(S3C2410_GPB(1));
-
-	/* mark the key as input, without pullups (there is one on the board) */
-	for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
-		s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT);
-	}
-
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-
-	if (features.lcd_index != -1) {
-		int li;
-
-		mini2440_fb_info.displays =
-			&mini2440_lcd_cfg[features.lcd_index];
-
-		pr_info("MINI2440: LCD");
-		for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++)
-			if (li == features.lcd_index)
-				pr_cont(" [%d:%dx%d]", li,
-					mini2440_lcd_cfg[li].width,
-					mini2440_lcd_cfg[li].height);
-			else
-				pr_cont(" %d:%dx%d", li,
-					mini2440_lcd_cfg[li].width,
-					mini2440_lcd_cfg[li].height);
-		pr_cont("\n");
-		s3c24xx_fb_set_platdata(&mini2440_fb_info);
-	}
-
-	s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
-	gpiod_add_lookup_table(&mini2440_mmc_gpio_table);
-	s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
-	s3c_nand_set_platdata(&mini2440_nand_info);
-	s3c_i2c0_set_platdata(NULL);
-
-	i2c_register_board_info(0, mini2440_i2c_devs,
-				ARRAY_SIZE(mini2440_i2c_devs));
-
-	/* Disable pull-up on the LED lines */
-	s3c_gpio_setpull(S3C2410_GPB(5), S3C_GPIO_PULL_NONE);
-	s3c_gpio_setpull(S3C2410_GPB(6), S3C_GPIO_PULL_NONE);
-	s3c_gpio_setpull(S3C2410_GPB(7), S3C_GPIO_PULL_NONE);
-	s3c_gpio_setpull(S3C2410_GPB(8), S3C_GPIO_PULL_NONE);
-	s3c_gpio_setpull(S3C2410_GPG(4), S3C_GPIO_PULL_NONE);
-
-	/* Add lookups for the lines */
-	gpiod_add_lookup_table(&mini2440_led1_gpio_table);
-	gpiod_add_lookup_table(&mini2440_led2_gpio_table);
-	gpiod_add_lookup_table(&mini2440_led3_gpio_table);
-	gpiod_add_lookup_table(&mini2440_led4_gpio_table);
-	gpiod_add_lookup_table(&mini2440_backlight_gpio_table);
-
-	platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices));
-
-	if (features.count)	/* the optional features */
-		platform_add_devices(features.optional, features.count);
-
-}
-
-
-MACHINE_START(MINI2440, "MINI2440")
-	/* Maintainer: Michel Pollet <buserror@gmail.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2440,
-	.map_io		= mini2440_map_io,
-	.init_machine	= mini2440_init,
-	.init_irq	= s3c2440_init_irq,
-	.init_time	= mini2440_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-mini6410.c b/arch/arm/mach-s3c/mach-mini6410.c
deleted file mode 100644
index 058ae9e8b89f..000000000000
--- a/arch/arm/mach-s3c/mach-mini6410.c
+++ /dev/null
@@ -1,365 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//	http://armlinux.simtec.co.uk/
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/dm9000.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/types.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "map.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include <linux/soc/samsung/s3c-adc.h>
-#include "cpu.h"
-#include "devs.h"
-#include "fb.h"
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/mmc-sdhci-s3c.h>
-#include "sdhci.h"
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include "irqs.h"
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include "s3c64xx.h"
-#include "regs-modem-s3c64xx.h"
-#include "regs-srom-s3c64xx.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg mini6410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	= 0,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[1] = {
-		.hwport	= 1,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[2] = {
-		.hwport	= 2,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[3] = {
-		.hwport	= 3,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource mini6410_dm9k_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2),
-	[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2),
-	[2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \
-					| IORESOURCE_IRQ_HIGHLEVEL),
-};
-
-static struct dm9000_plat_data mini6410_dm9k_pdata = {
-	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device mini6410_device_eth = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mini6410_dm9k_resource),
-	.resource	= mini6410_dm9k_resource,
-	.dev		= {
-		.platform_data	= &mini6410_dm9k_pdata,
-	},
-};
-
-static struct mtd_partition mini6410_nand_part[] = {
-	[0] = {
-		.name	= "uboot",
-		.size	= SZ_1M,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "kernel",
-		.size	= SZ_2M,
-		.offset	= SZ_1M,
-	},
-	[2] = {
-		.name	= "rootfs",
-		.size	= MTDPART_SIZ_FULL,
-		.offset	= SZ_1M + SZ_2M,
-	},
-};
-
-static struct s3c2410_nand_set mini6410_nand_sets[] = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(mini6410_nand_part),
-		.partitions	= mini6410_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand mini6410_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(mini6410_nand_sets),
-	.sets		= mini6410_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-static struct s3c_fb_pd_win mini6410_lcd_type0_fb_win = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 480,
-	.yres		= 272,
-};
-
-static struct fb_videomode mini6410_lcd_type0_timing = {
-	/* 4.3" 480x272 */
-	.left_margin	= 3,
-	.right_margin	= 2,
-	.upper_margin	= 1,
-	.lower_margin	= 1,
-	.hsync_len	= 40,
-	.vsync_len	= 1,
-	.xres		= 480,
-	.yres		= 272,
-};
-
-static struct s3c_fb_pd_win mini6410_lcd_type1_fb_win = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct fb_videomode mini6410_lcd_type1_timing = {
-	/* 7.0" 800x480 */
-	.left_margin	= 8,
-	.right_margin	= 13,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-	.hsync_len	= 3,
-	.vsync_len	= 1,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct s3c_fb_platdata mini6410_lcd_pdata[] __initdata = {
-	{
-		.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-		.vtiming	= &mini6410_lcd_type0_timing,
-		.win[0]		= &mini6410_lcd_type0_fb_win,
-		.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-		.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	}, {
-		.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-		.vtiming	= &mini6410_lcd_type1_timing,
-		.win[0]		= &mini6410_lcd_type1_fb_win,
-		.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-		.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	},
-	{ },
-};
-
-static void mini6410_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power)
-		gpio_direction_output(S3C64XX_GPE(0), 1);
-	else
-		gpio_direction_output(S3C64XX_GPE(0), 0);
-}
-
-static struct plat_lcd_data mini6410_lcd_power_data = {
-	.set_power	= mini6410_lcd_power_set,
-};
-
-static struct platform_device mini6410_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &mini6410_lcd_power_data,
-};
-
-static struct s3c_sdhci_platdata mini6410_hsmmc1_pdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= S3C64XX_GPN(10),
-	.ext_cd_gpio_invert	= true,
-};
-
-static struct platform_device *mini6410_devices[] __initdata = {
-	&mini6410_device_eth,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_ohci,
-	&s3c_device_nand,
-	&s3c_device_fb,
-	&mini6410_lcd_powerdev,
-	&s3c_device_adc,
-};
-
-static void __init mini6410_map_io(void)
-{
-	u32 tmp;
-
-	s3c64xx_init_io(NULL, 0);
-	s3c64xx_set_xtal_freq(12000000);
-	s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
-	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
-
-	/* set the LCD type */
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the LCD bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-/*
- * mini6410_features string
- *
- * 0-9 LCD configuration
- *
- */
-static char mini6410_features_str[12] __initdata = "0";
-
-static int __init mini6410_features_setup(char *str)
-{
-	if (str)
-		strscpy(mini6410_features_str, str,
-			sizeof(mini6410_features_str));
-	return 1;
-}
-
-__setup("mini6410=", mini6410_features_setup);
-
-#define FEATURE_SCREEN (1 << 0)
-
-struct mini6410_features_t {
-	int done;
-	int lcd_index;
-};
-
-static void mini6410_parse_features(
-		struct mini6410_features_t *features,
-		const char *features_str)
-{
-	const char *fp = features_str;
-
-	features->done = 0;
-	features->lcd_index = 0;
-
-	while (*fp) {
-		char f = *fp++;
-
-		switch (f) {
-		case '0'...'9':	/* tft screen */
-			if (features->done & FEATURE_SCREEN) {
-				printk(KERN_INFO "MINI6410: '%c' ignored, "
-					"screen type already set\n", f);
-			} else {
-				int li = f - '0';
-				if (li >= ARRAY_SIZE(mini6410_lcd_pdata))
-					printk(KERN_INFO "MINI6410: '%c' out "
-						"of range LCD mode\n", f);
-				else {
-					features->lcd_index = li;
-				}
-			}
-			features->done |= FEATURE_SCREEN;
-			break;
-		}
-	}
-}
-
-static void __init mini6410_machine_init(void)
-{
-	u32 cs1;
-	struct mini6410_features_t features = { 0 };
-
-	printk(KERN_INFO "MINI6410: Option string mini6410=%s\n",
-			mini6410_features_str);
-
-	/* Parse the feature string */
-	mini6410_parse_features(&features, mini6410_features_str);
-
-	printk(KERN_INFO "MINI6410: selected LCD display is %dx%d\n",
-		mini6410_lcd_pdata[features.lcd_index].win[0]->xres,
-		mini6410_lcd_pdata[features.lcd_index].win[0]->yres);
-
-	s3c_nand_set_platdata(&mini6410_nand_info);
-	s3c_fb_set_platdata(&mini6410_lcd_pdata[features.lcd_index]);
-	s3c_sdhci1_set_platdata(&mini6410_hsmmc1_pdata);
-	s3c64xx_ts_set_platdata(NULL);
-
-	/* configure nCS1 width to 16 bits */
-
-	cs1 = __raw_readl(S3C64XX_SROM_BW) &
-		~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
-			S3C64XX_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S3C64XX_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-
-	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
-		(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
-		(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
-		(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
-		(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
-		(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
-		(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
-
-	gpio_request(S3C64XX_GPF(15), "LCD power");
-	gpio_request(S3C64XX_GPE(0), "LCD power");
-
-	platform_add_devices(mini6410_devices, ARRAY_SIZE(mini6410_devices));
-}
-
-MACHINE_START(MINI6410, "MINI6410")
-	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= mini6410_map_io,
-	.init_machine	= mini6410_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-n30.c b/arch/arm/mach-s3c/mach-n30.c
deleted file mode 100644
index 75f5dc6351a1..000000000000
--- a/arch/arm/mach-s3c/mach-n30.c
+++ /dev/null
@@ -1,675 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Machine specific code for the Acer n30, Acer N35, Navman PiN 570,
-// Yakumo AlphaX and Airis NC05 PDAs.
-//
-// Copyright (c) 2003-2005 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// Copyright (c) 2005-2008 Christer Weinigel <christer@weinigel.se>
-//
-// There is a wiki with more information about the n30 port at
-// https://handhelds.org/moin/moin.cgi/AcerN30Documentation .
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include <linux/gpio_keys.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-#include <linux/mmc/host.h>
-
-#include "hardware-s3c24xx.h"
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include <linux/platform_data/leds-s3c24xx.h>
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "cpu.h"
-#include "devs.h"
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-
-#include "s3c24xx.h"
-
-static struct map_desc n30_iodesc[] __initdata = {
-	/* nothing here yet */
-};
-
-static struct s3c2410_uartcfg n30_uartcfgs[] = {
-	/* Normal serial port */
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x2c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	/* IR port */
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.uart_flags  = UPF_CONS_FLOW,
-		.ucon	     = 0x2c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-	},
-	/* On the N30 the bluetooth controller is connected here.
-	 * On the N35 and variants the GPS receiver is connected here. */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x2c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-};
-
-static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
-	.vbus_pin		= S3C2410_GPG(1),
-	.vbus_pin_inverted	= 0,
-	.pullup_pin		= S3C2410_GPB(3),
-};
-
-static struct gpio_keys_button n30_buttons[] = {
-	{
-		.gpio		= S3C2410_GPF(0),
-		.code		= KEY_POWER,
-		.desc		= "Power",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(9),
-		.code		= KEY_UP,
-		.desc		= "Thumbwheel Up",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(8),
-		.code		= KEY_DOWN,
-		.desc		= "Thumbwheel Down",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(7),
-		.code		= KEY_ENTER,
-		.desc		= "Thumbwheel Press",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(7),
-		.code		= KEY_HOMEPAGE,
-		.desc		= "Home",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(6),
-		.code		= KEY_CALENDAR,
-		.desc		= "Calendar",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(5),
-		.code		= KEY_ADDRESSBOOK,
-		.desc		= "Contacts",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(4),
-		.code		= KEY_MAIL,
-		.desc		= "Mail",
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_platform_data n30_button_data = {
-	.buttons	= n30_buttons,
-	.nbuttons	= ARRAY_SIZE(n30_buttons),
-};
-
-static struct platform_device n30_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &n30_button_data,
-	}
-};
-
-static struct gpio_keys_button n35_buttons[] = {
-	{
-		.gpio		= S3C2410_GPF(0),
-		.code		= KEY_POWER,
-		.type		= EV_PWR,
-		.desc		= "Power",
-		.active_low	= 0,
-		.wakeup		= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(9),
-		.code		= KEY_UP,
-		.desc		= "Joystick Up",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(8),
-		.code		= KEY_DOWN,
-		.desc		= "Joystick Down",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(6),
-		.code		= KEY_DOWN,
-		.desc		= "Joystick Left",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(5),
-		.code		= KEY_DOWN,
-		.desc		= "Joystick Right",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(7),
-		.code		= KEY_ENTER,
-		.desc		= "Joystick Press",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(7),
-		.code		= KEY_HOMEPAGE,
-		.desc		= "Home",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(6),
-		.code		= KEY_CALENDAR,
-		.desc		= "Calendar",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(5),
-		.code		= KEY_ADDRESSBOOK,
-		.desc		= "Contacts",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(4),
-		.code		= KEY_MAIL,
-		.desc		= "Mail",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(3),
-		.code		= SW_RADIO,
-		.desc		= "GPS Antenna",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(2),
-		.code		= SW_HEADPHONE_INSERT,
-		.desc		= "Headphone",
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_platform_data n35_button_data = {
-	.buttons	= n35_buttons,
-	.nbuttons	= ARRAY_SIZE(n35_buttons),
-};
-
-static struct platform_device n35_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &n35_button_data,
-	}
-};
-
-/* This is the bluetooth LED on the device. */
-
-static struct gpiod_lookup_table n30_blue_led_gpio_table = {
-	.dev_id = "s3c24xx_led.1",
-	.table = {
-		GPIO_LOOKUP("GPG", 6, NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct s3c24xx_led_platdata n30_blue_led_pdata = {
-	.name		= "blue_led",
-	.def_trigger	= "",
-};
-
-/* This is the blue LED on the device. Originally used to indicate GPS activity
- * by flashing. */
-
-static struct gpiod_lookup_table n35_blue_led_gpio_table = {
-	.dev_id = "s3c24xx_led.1",
-	.table = {
-		GPIO_LOOKUP("GPD", 8, NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct s3c24xx_led_platdata n35_blue_led_pdata = {
-	.name		= "blue_led",
-	.def_trigger	= "",
-};
-
-/* This LED is driven by the battery microcontroller, and is blinking
- * red, blinking green or solid green when the battery is low,
- * charging or full respectively.  By driving GPD9 low, it's possible
- * to force the LED to blink red, so call that warning LED.  */
-
-static struct gpiod_lookup_table n30_warning_led_gpio_table = {
-	.dev_id = "s3c24xx_led.2",
-	.table = {
-		GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct s3c24xx_led_platdata n30_warning_led_pdata = {
-	.name		= "warning_led",
-	.def_trigger	= "",
-};
-
-static struct gpiod_lookup_table n35_warning_led_gpio_table = {
-	.dev_id = "s3c24xx_led.2",
-	.table = {
-		GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct s3c24xx_led_platdata n35_warning_led_pdata = {
-	.name		= "warning_led",
-	.def_trigger	= "",
-};
-
-static struct platform_device n30_blue_led = {
-	.name		= "s3c24xx_led",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &n30_blue_led_pdata,
-	},
-};
-
-static struct platform_device n35_blue_led = {
-	.name		= "s3c24xx_led",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &n35_blue_led_pdata,
-	},
-};
-
-static struct platform_device n30_warning_led = {
-	.name		= "s3c24xx_led",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &n30_warning_led_pdata,
-	},
-};
-
-static struct platform_device n35_warning_led = {
-	.name		= "s3c24xx_led",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &n35_warning_led_pdata,
-	},
-};
-
-static struct s3c2410fb_display n30_display __initdata = {
-	.type		= S3C2410_LCDCON1_TFT,
-	.width		= 240,
-	.height		= 320,
-	.pixclock	= 170000,
-
-	.xres		= 240,
-	.yres		= 320,
-	.bpp		= 16,
-	.left_margin	= 3,
-	.right_margin	= 40,
-	.hsync_len	= 40,
-	.upper_margin	= 2,
-	.lower_margin	= 3,
-	.vsync_len	= 2,
-
-	.lcdcon5 = S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVFRAME,
-};
-
-static struct s3c2410fb_mach_info n30_fb_info __initdata = {
-	.displays	= &n30_display,
-	.num_displays	= 1,
-	.default_display = 0,
-	.lpcsel		= 0x06,
-};
-
-static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
-{
-	s3c24xx_mci_def_set_power(power_mode, vdd);
-
-	switch (power_mode) {
-	case MMC_POWER_ON:
-	case MMC_POWER_UP:
-		gpio_set_value(S3C2410_GPG(4), 1);
-		break;
-	case MMC_POWER_OFF:
-	default:
-		gpio_set_value(S3C2410_GPG(4), 0);
-		break;
-	}
-}
-
-static struct s3c24xx_mci_pdata n30_mci_cfg __initdata = {
-	.ocr_avail	= MMC_VDD_32_33,
-	.set_power	= n30_sdi_set_power,
-};
-
-static struct gpiod_lookup_table n30_mci_gpio_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* Card detect S3C2410_GPF(1) */
-		GPIO_LOOKUP("GPIOF", 1, "cd", GPIO_ACTIVE_LOW),
-		/* Write protect S3C2410_GPG(10) */
-		GPIO_LOOKUP("GPIOG", 10, "wp", GPIO_ACTIVE_LOW),
-		{ },
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-	},
-};
-
-static struct platform_device *n30_devices[] __initdata = {
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_ohci,
-	&s3c_device_rtc,
-	&s3c_device_usbgadget,
-	&s3c_device_sdi,
-	&n30_button_device,
-	&n30_blue_led,
-	&n30_warning_led,
-};
-
-static struct platform_device *n35_devices[] __initdata = {
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_rtc,
-	&s3c_device_usbgadget,
-	&s3c_device_sdi,
-	&n35_button_device,
-	&n35_blue_led,
-	&n35_warning_led,
-};
-
-static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
-	.flags		= 0,
-	.slave_addr	= 0x10,
-	.frequency	= 10*1000,
-};
-
-/* Lots of hardcoded stuff, but it sets up the hardware in a useful
- * state so that we can boot Linux directly from flash. */
-static void __init n30_hwinit(void)
-{
-	/* GPA0-11 special functions -- unknown what they do
-	 * GPA12 N30 special function -- unknown what it does
-	 *       N35/PiN output -- unknown what it does
-	 *
-	 * A12 is nGCS1 on the N30 and an output on the N35/PiN.  I
-	 * don't think it does anything useful on the N30, so I ought
-	 * to make it an output there too since it always driven to 0
-	 * as far as I can tell. */
-	if (machine_is_n30())
-		__raw_writel(0x007fffff, S3C2410_GPACON);
-	if (machine_is_n35())
-		__raw_writel(0x007fefff, S3C2410_GPACON);
-	__raw_writel(0x00000000, S3C2410_GPADAT);
-
-	/* GPB0 TOUT0 backlight level
-	 * GPB1 output 1=backlight on
-	 * GPB2 output IrDA enable 0=transceiver enabled, 1=disabled
-	 * GPB3 output USB D+ pull up 0=disabled, 1=enabled
-	 * GPB4 N30 output -- unknown function
-	 *      N30/PiN GPS control 0=GPS enabled, 1=GPS disabled
-	 * GPB5 output -- unknown function
-	 * GPB6 input -- unknown function
-	 * GPB7 output -- unknown function
-	 * GPB8 output -- probably LCD driver enable
-	 * GPB9 output -- probably LCD VSYNC driver enable
-	 * GPB10 output -- probably LCD HSYNC driver enable
-	 */
-	__raw_writel(0x00154556, S3C2410_GPBCON);
-	__raw_writel(0x00000750, S3C2410_GPBDAT);
-	__raw_writel(0x00000073, S3C2410_GPBUP);
-
-	/* GPC0 input RS232 DCD/DSR/RI
-	 * GPC1 LCD
-	 * GPC2 output RS232 DTR?
-	 * GPC3 input RS232 DCD/DSR/RI
-	 * GPC4 LCD
-	 * GPC5 output 0=NAND write enabled, 1=NAND write protect
-	 * GPC6 input -- unknown function
-	 * GPC7 input charger status 0=charger connected
-	 *      this input can be triggered by power on the USB device
-	 *      port too, but will go back to disconnected soon after.
-	 * GPC8 N30/N35 output -- unknown function, always driven to 1
-	 *      PiN input -- unknown function, always read as 1
-	 *      Make it an input with a pull up for all models.
-	 * GPC9-15 LCD
-	 */
-	__raw_writel(0xaaa80618, S3C2410_GPCCON);
-	__raw_writel(0x0000014c, S3C2410_GPCDAT);
-	__raw_writel(0x0000fef2, S3C2410_GPCUP);
-
-	/* GPD0 input -- unknown function
-	 * GPD1-D7 LCD
-	 * GPD8 N30 output -- unknown function
-	 *      N35/PiN output 1=GPS LED on
-	 * GPD9 output 0=power led blinks red, 1=normal power led function
-	 * GPD10 output -- unknown function
-	 * GPD11-15 LCD drivers
-	 */
-	__raw_writel(0xaa95aaa4, S3C2410_GPDCON);
-	__raw_writel(0x00000601, S3C2410_GPDDAT);
-	__raw_writel(0x0000fbfe, S3C2410_GPDUP);
-
-	/* GPE0-4 I2S audio bus
-	 * GPE5-10 SD/MMC bus
-	 * E11-13 outputs -- unknown function, probably power management
-	 * E14-15 I2C bus connected to the battery controller
-	 */
-	__raw_writel(0xa56aaaaa, S3C2410_GPECON);
-	__raw_writel(0x0000efc5, S3C2410_GPEDAT);
-	__raw_writel(0x0000f81f, S3C2410_GPEUP);
-
-	/* GPF0  input 0=power button pressed
-	 * GPF1  input SD/MMC switch 0=card present
-	 * GPF2  N30 1=reset button pressed (inverted compared to the rest)
-	 *	 N35/PiN 0=reset button pressed
-	 * GPF3  N30/PiN input -- unknown function
-	 *       N35 input GPS antenna position, 0=antenna closed, 1=open
-	 * GPF4  input 0=button 4 pressed
-	 * GPF5  input 0=button 3 pressed
-	 * GPF6  input 0=button 2 pressed
-	 * GPF7  input 0=button 1 pressed
-	 */
-	__raw_writel(0x0000aaaa, S3C2410_GPFCON);
-	__raw_writel(0x00000000, S3C2410_GPFDAT);
-	__raw_writel(0x000000ff, S3C2410_GPFUP);
-
-	/* GPG0  input RS232 DCD/DSR/RI
-	 * GPG1  input 1=USB gadget port has power from a host
-	 * GPG2  N30 input -- unknown function
-	 *       N35/PiN input 0=headphones plugged in, 1=not plugged in
-	 * GPG3  N30 output -- unknown function
-	 *       N35/PiN input with unknown function
-	 * GPG4  N30 output 0=MMC enabled, 1=MMC disabled
-	 * GPG5  N30 output 0=BlueTooth chip disabled, 1=enabled
-	 *       N35/PiN input joystick right
-	 * GPG6  N30 output 0=blue led on, 1=off
-	 *       N35/PiN input joystick left
-	 * GPG7  input 0=thumbwheel pressed
-	 * GPG8  input 0=thumbwheel down
-	 * GPG9  input 0=thumbwheel up
-	 * GPG10 input SD/MMC write protect switch
-	 * GPG11 N30 input -- unknown function
-	 *       N35 output 0=GPS antenna powered, 1=not powered
-	 *       PiN output -- unknown function
-	 * GPG12-15 touch screen functions
-	 *
-	 * The pullups differ between the models, so enable all
-	 * pullups that are enabled on any of the models.
-	 */
-	if (machine_is_n30())
-		__raw_writel(0xff0a956a, S3C2410_GPGCON);
-	if (machine_is_n35())
-		__raw_writel(0xff4aa92a, S3C2410_GPGCON);
-	__raw_writel(0x0000e800, S3C2410_GPGDAT);
-	__raw_writel(0x0000f86f, S3C2410_GPGUP);
-
-	/* GPH0/1/2/3 RS232 serial port
-	 * GPH4/5 IrDA serial port
-	 * GPH6/7  N30 BlueTooth serial port
-	 *         N35/PiN GPS receiver
-	 * GPH8 input -- unknown function
-	 * GPH9 CLKOUT0 HCLK -- unknown use
-	 * GPH10 CLKOUT1 FCLK -- unknown use
-	 *
-	 * The pull ups for H6/H7 are enabled on N30 but not on the
-	 * N35/PiN.  I suppose is useful for a budget model of the N30
-	 * with no bluetooth.  It doesn't hurt to have the pull ups
-	 * enabled on the N35, so leave them enabled for all models.
-	 */
-	__raw_writel(0x0028aaaa, S3C2410_GPHCON);
-	__raw_writel(0x000005ef, S3C2410_GPHDAT);
-	__raw_writel(0x0000063f, S3C2410_GPHUP);
-}
-
-static void __init n30_map_io(void)
-{
-	s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
-	n30_hwinit();
-	s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init n30_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-/* GPB3 is the line that controls the pull-up for the USB D+ line */
-
-static void __init n30_init(void)
-{
-	WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));
-
-	s3c24xx_fb_set_platdata(&n30_fb_info);
-	s3c24xx_udc_set_platdata(&n30_udc_cfg);
-	gpiod_add_lookup_table(&n30_mci_gpio_table);
-	s3c24xx_mci_set_platdata(&n30_mci_cfg);
-	s3c_i2c0_set_platdata(&n30_i2ccfg);
-
-	/* Turn off suspend on both USB ports, and switch the
-	 * selectable USB port to USB device mode. */
-
-	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-			      S3C2410_MISCCR_USBSUSPND0 |
-			      S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-
-	if (machine_is_n30()) {
-		/* Turn off suspend on both USB ports, and switch the
-		 * selectable USB port to USB device mode. */
-		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-				      S3C2410_MISCCR_USBSUSPND0 |
-				      S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-		/* Disable pull-up and add GPIO tables */
-		s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
-		s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
-		gpiod_add_lookup_table(&n30_blue_led_gpio_table);
-		gpiod_add_lookup_table(&n30_warning_led_gpio_table);
-
-		platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices));
-	}
-
-	if (machine_is_n35()) {
-		/* Turn off suspend and switch the selectable USB port
-		 * to USB device mode.  Turn on suspend for the host
-		 * port since it is not connected on the N35.
-		 *
-		 * Actually, the host port is available at some pads
-		 * on the back of the device, so it would actually be
-		 * possible to add a USB device inside the N35 if you
-		 * are willing to do some hardware modifications. */
-		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-				      S3C2410_MISCCR_USBSUSPND0 |
-				      S3C2410_MISCCR_USBSUSPND1,
-				      S3C2410_MISCCR_USBSUSPND0);
-
-		/* Disable pull-up and add GPIO tables */
-		s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
-		s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
-		gpiod_add_lookup_table(&n35_blue_led_gpio_table);
-		gpiod_add_lookup_table(&n35_warning_led_gpio_table);
-
-		platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
-	}
-}
-
-MACHINE_START(N30, "Acer-N30")
-	/* Maintainer: Christer Weinigel <christer@weinigel.se>,
-				Ben Dooks <ben-linux@fluff.org>
-	*/
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.init_time	= n30_init_time,
-	.init_machine	= n30_init,
-	.init_irq	= s3c2410_init_irq,
-	.map_io		= n30_map_io,
-MACHINE_END
-
-MACHINE_START(N35, "Acer-N35")
-	/* Maintainer: Christer Weinigel <christer@weinigel.se>
-	*/
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.init_time	= n30_init_time,
-	.init_machine	= n30_init,
-	.init_irq	= s3c2410_init_irq,
-	.map_io		= n30_map_io,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-ncp.c b/arch/arm/mach-s3c/mach-ncp.c
deleted file mode 100644
index 1e65f8bce5c4..000000000000
--- a/arch/arm/mach-s3c/mach-ncp.c
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2008-2009 Samsung Electronics
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "irqs.h"
-#include "map.h"
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "fb.h"
-
-#include "devs.h"
-#include "cpu.h"
-
-#include "s3c64xx.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
-	/* REVISIT: NCP uses only serial 1, 2 */
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-};
-
-static struct platform_device *ncp_devices[] __initdata = {
-	&s3c_device_hsmmc1,
-	&s3c_device_i2c0,
-};
-
-static struct map_desc ncp_iodesc[] __initdata = {};
-
-static void __init ncp_map_io(void)
-{
-	s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
-	s3c64xx_set_xtal_freq(12000000);
-	s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
-	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
-}
-
-static void __init ncp_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-
-	platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
-}
-
-MACHINE_START(NCP, "NCP")
-	/* Maintainer: Samsung Electronics */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= ncp_map_io,
-	.init_machine	= ncp_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-nexcoder.c b/arch/arm/mach-s3c/mach-nexcoder.c
deleted file mode 100644
index d17a3fcb7425..000000000000
--- a/arch/arm/mach-s3c/mach-nexcoder.c
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// linux/arch/arm/mach-s3c2440/mach-nexcoder.c
-//
-// Copyright (c) 2004 Nex Vision
-//   Guillaume GOURAT <guillaume.gourat@nexvision.tv>
-//
-// Modifications:
-//     15-10-2004 GG  Created initial version
-//     12-03-2005 BJD Updated for release
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mtd/map.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-//#include <asm/debug-ll.h>
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "gpio-cfg.h"
-#include "devs.h"
-#include "cpu.h"
-
-#include "s3c24xx.h"
-
-static struct map_desc nexcoder_iodesc[] __initdata = {
-	/* nothing here yet */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* NOR Flash on NexVision NexCoder 2440 board */
-
-static struct resource nexcoder_nor_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_8M),
-};
-
-static struct map_info nexcoder_nor_map = {
-	.bankwidth = 2,
-};
-
-static struct platform_device nexcoder_device_nor = {
-	.name		= "mtd-flash",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(nexcoder_nor_resource),
-	.resource	= nexcoder_nor_resource,
-	.dev =
-	{
-		.platform_data = &nexcoder_nor_map,
-	}
-};
-
-/* Standard Nexcoder devices */
-
-static struct platform_device *nexcoder_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
- 	&s3c_device_rtc,
-	&s3c_device_camif,
-	&s3c_device_spi0,
-	&s3c_device_spi1,
-	&nexcoder_device_nor,
-};
-
-static void __init nexcoder_sensorboard_init(void)
-{
-	/* Initialize SCCB bus */
-	gpio_request_one(S3C2410_GPE(14), GPIOF_OUT_INIT_HIGH, NULL);
-	gpio_free(S3C2410_GPE(14)); /* IICSCL */
-	gpio_request_one(S3C2410_GPE(15), GPIOF_OUT_INIT_HIGH, NULL);
-	gpio_free(S3C2410_GPE(15)); /* IICSDA */
-
-	/* Power up the sensor board */
-	gpio_request_one(S3C2410_GPF(1), GPIOF_OUT_INIT_HIGH, NULL);
-	gpio_free(S3C2410_GPF(1)); /* CAM_GPIO7 => nLDO_PWRDN */
-	gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL);
-	gpio_free(S3C2410_GPF(2)); /* CAM_GPIO6 => CAM_PWRDN */
-}
-
-static void __init nexcoder_map_io(void)
-{
-	s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
-	s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-
-	nexcoder_sensorboard_init();
-}
-
-static void __init nexcoder_init_time(void)
-{
-	s3c2440_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init nexcoder_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-
-	platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
-};
-
-MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
-	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2440,
-	.map_io		= nexcoder_map_io,
-	.init_machine	= nexcoder_init,
-	.init_irq	= s3c2440_init_irq,
-	.init_time	= nexcoder_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-osiris-dvs.c b/arch/arm/mach-s3c/mach-osiris-dvs.c
deleted file mode 100644
index 2e283aedab65..000000000000
--- a/arch/arm/mach-s3c/mach-osiris-dvs.c
+++ /dev/null
@@ -1,178 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2009 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// Simtec Osiris Dynamic Voltage Scaling support.
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/cpufreq.h>
-#include <linux/gpio.h>
-
-#include <linux/mfd/tps65010.h>
-
-#include <linux/soc/samsung/s3c-cpu-freq.h>
-#include "gpio-samsung.h"
-
-#define OSIRIS_GPIO_DVS	S3C2410_GPB(5)
-
-static bool dvs_en;
-
-static void osiris_dvs_tps_setdvs(bool on)
-{
-	unsigned vregs1 = 0, vdcdc2 = 0;
-
-	if (!on) {
-		vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF;
-		vregs1 = TPS_LDO1_OFF;	/* turn off in low-power mode */
-	}
-
-	dvs_en = on;
-	vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V;
-	vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE;
-
-	tps65010_config_vregs1(vregs1);
-	tps65010_config_vdcdc2(vdcdc2);
-}
-
-static bool is_dvs(struct s3c_freq *f)
-{
-	/* at the moment, we assume ARMCLK = HCLK => DVS */
-	return f->armclk == f->hclk;
-}
-
-/* keep track of current state */
-static bool cur_dvs = false;
-
-static int osiris_dvs_notify(struct notifier_block *nb,
-			      unsigned long val, void *data)
-{
-	struct cpufreq_freqs *cf = data;
-	struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf);
-	bool old_dvs = is_dvs(&freqs->old);
-	bool new_dvs = is_dvs(&freqs->new);
-	int ret = 0;
-
-	if (!dvs_en)
-		return 0;
-
-	printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__,
-	       freqs->old.armclk, freqs->old.hclk,
-	       freqs->new.armclk, freqs->new.hclk);
-
-	switch (val) {
-	case CPUFREQ_PRECHANGE:
-		if ((old_dvs && !new_dvs) ||
-		    (cur_dvs && !new_dvs)) {
-			pr_debug("%s: exiting dvs\n", __func__);
-			cur_dvs = false;
-			gpio_set_value(OSIRIS_GPIO_DVS, 1);
-		}
-		break;
-	case CPUFREQ_POSTCHANGE:
-		if ((!old_dvs && new_dvs) ||
-		    (!cur_dvs && new_dvs)) {
-			pr_debug("entering dvs\n");
-			cur_dvs = true;
-			gpio_set_value(OSIRIS_GPIO_DVS, 0);
-		}
-		break;
-	}
-
-	return ret;
-}
-
-static struct notifier_block osiris_dvs_nb = {
-	.notifier_call	= osiris_dvs_notify,
-};
-
-static int osiris_dvs_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	dev_info(&pdev->dev, "initialising\n");
-
-	ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs");
-	if (ret) {
-		dev_err(&pdev->dev, "cannot claim gpio\n");
-		goto err_nogpio;
-	}
-
-	/* start with dvs disabled */
-	gpio_direction_output(OSIRIS_GPIO_DVS, 1);
-
-	ret = cpufreq_register_notifier(&osiris_dvs_nb,
-					CPUFREQ_TRANSITION_NOTIFIER);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register with cpufreq\n");
-		goto err_nofreq;
-	}
-
-	osiris_dvs_tps_setdvs(true);
-
-	return 0;
-
-err_nofreq:
-	gpio_free(OSIRIS_GPIO_DVS);
-
-err_nogpio:
-	return ret;
-}
-
-static int osiris_dvs_remove(struct platform_device *pdev)
-{
-	dev_info(&pdev->dev, "exiting\n");
-
-	/* disable any current dvs */
-	gpio_set_value(OSIRIS_GPIO_DVS, 1);
-	osiris_dvs_tps_setdvs(false);
-
-	cpufreq_unregister_notifier(&osiris_dvs_nb,
-				    CPUFREQ_TRANSITION_NOTIFIER);
-
-	gpio_free(OSIRIS_GPIO_DVS);
-
-	return 0;
-}
-
-/* the CONFIG_PM block is so small, it isn't worth actually compiling it
- * out if the configuration isn't set. */
-
-static int osiris_dvs_suspend(struct device *dev)
-{
-	gpio_set_value(OSIRIS_GPIO_DVS, 1);
-	osiris_dvs_tps_setdvs(false);
-	cur_dvs = false;
-
-	return 0;
-}
-
-static int osiris_dvs_resume(struct device *dev)
-{
-	osiris_dvs_tps_setdvs(true);
-	return 0;
-}
-
-static const struct dev_pm_ops osiris_dvs_pm = {
-	.suspend	= osiris_dvs_suspend,
-	.resume		= osiris_dvs_resume,
-};
-
-static struct platform_driver osiris_dvs_driver = {
-	.probe		= osiris_dvs_probe,
-	.remove		= osiris_dvs_remove,
-	.driver		= {
-		.name	= "osiris-dvs",
-		.pm	= &osiris_dvs_pm,
-	},
-};
-
-module_platform_driver(osiris_dvs_driver);
-
-MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:osiris-dvs");
diff --git a/arch/arm/mach-s3c/mach-osiris.c b/arch/arm/mach-s3c/mach-osiris.c
deleted file mode 100644
index d900d1354de1..000000000000
--- a/arch/arm/mach-s3c/mach-osiris.c
+++ /dev/null
@@ -1,405 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2005-2008 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include <linux/mfd/tps65010.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-
-#include "cpu.h"
-#include <linux/soc/samsung/s3c-cpu-freq.h>
-#include "devs.h"
-#include "gpio-cfg.h"
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "s3c24xx.h"
-#include "osiris.h"
-#include "regs-mem-s3c24xx.h"
-
-/* onboard perihperal map */
-
-static struct map_desc osiris_iodesc[] __initdata = {
-  /* ISA IO areas (may be over-written later) */
-
-  {
-	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-	  .pfn		= __phys_to_pfn(S3C2410_CS5),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
-  },
-
-  /* CPLD control registers */
-
-  {
-	  .virtual	= (u32)OSIRIS_VA_CTRL0,
-	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL0),
-	  .length	= SZ_16K,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)OSIRIS_VA_CTRL1,
-	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL1),
-	  .length	= SZ_16K,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)OSIRIS_VA_CTRL2,
-	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL2),
-	  .length	= SZ_16K,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)OSIRIS_VA_IDREG,
-	  .pfn		= __phys_to_pfn(OSIRIS_PA_IDREG),
-	  .length	= SZ_16K,
-	  .type		= MT_DEVICE,
-  },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	}
-};
-
-/* NAND Flash on Osiris board */
-
-static int external_map[]   = { 2 };
-static int chip0_map[]      = { 0 };
-static int chip1_map[]      = { 1 };
-
-static struct mtd_partition __initdata osiris_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_16K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_16K,
-		.offset	= SZ_16K,
-	},
-	[2] = {
-		.name	= "user1",
-		.offset	= SZ_4M,
-		.size	= SZ_32M - SZ_4M,
-	},
-	[3] = {
-		.name	= "user2",
-		.offset	= SZ_32M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_128K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_128K,
-		.offset	= SZ_128K,
-	},
-	[2] = {
-		.name	= "user1",
-		.offset	= SZ_4M,
-		.size	= SZ_32M - SZ_4M,
-	},
-	[3] = {
-		.name	= "user2",
-		.offset	= SZ_32M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-/* the Osiris has 3 selectable slots for nand-flash, the two
- * on-board chip areas, as well as the external slot.
- *
- * Note, there is no current hot-plug support for the External
- * socket.
-*/
-
-static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
-	[1] = {
-		.name		= "External",
-		.nr_chips	= 1,
-		.nr_map		= external_map,
-		.options	= NAND_SCAN_SILENT_NODEV,
-		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
-		.partitions	= osiris_default_nand_part,
-	},
-	[0] = {
-		.name		= "chip0",
-		.nr_chips	= 1,
-		.nr_map		= chip0_map,
-		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
-		.partitions	= osiris_default_nand_part,
-	},
-	[2] = {
-		.name		= "chip1",
-		.nr_chips	= 1,
-		.nr_map		= chip1_map,
-		.options	= NAND_SCAN_SILENT_NODEV,
-		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
-		.partitions	= osiris_default_nand_part,
-	},
-};
-
-static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
-{
-	unsigned int tmp;
-
-	slot = set->nr_map[slot] & 3;
-
-	pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
-		 slot, set, set->nr_map);
-
-	tmp = __raw_readb(OSIRIS_VA_CTRL0);
-	tmp &= ~OSIRIS_CTRL0_NANDSEL;
-	tmp |= slot;
-
-	pr_debug("osiris_nand: ctrl0 now %02x\n", tmp);
-
-	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
-}
-
-static struct s3c2410_platform_nand __initdata osiris_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 60,
-	.twrph1		= 60,
-	.nr_sets	= ARRAY_SIZE(osiris_nand_sets),
-	.sets		= osiris_nand_sets,
-	.select_chip	= osiris_nand_select,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-/* PCMCIA control and configuration */
-
-static struct resource osiris_pcmcia_resource[] = {
-	[0] = DEFINE_RES_MEM(0x0f000000, SZ_1M),
-	[1] = DEFINE_RES_MEM(0x0c000000, SZ_1M),
-};
-
-static struct platform_device osiris_pcmcia = {
-	.name		= "osiris-pcmcia",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(osiris_pcmcia_resource),
-	.resource	= osiris_pcmcia_resource,
-};
-
-/* Osiris power management device */
-
-#ifdef CONFIG_PM
-static unsigned char pm_osiris_ctrl0;
-
-static int osiris_pm_suspend(void)
-{
-	unsigned int tmp;
-
-	pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
-	tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
-
-	/* ensure correct NAND slot is selected on resume */
-	if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
-	        tmp |= 2;
-
-	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
-
-	/* ensure that an nRESET is not generated on resume. */
-	gpio_request_one(S3C2410_GPA(21), GPIOF_OUT_INIT_HIGH, NULL);
-	gpio_free(S3C2410_GPA(21));
-
-	return 0;
-}
-
-static void osiris_pm_resume(void)
-{
-	if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
-		__raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
-
-	__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
-
-	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
-}
-
-#else
-#define osiris_pm_suspend NULL
-#define osiris_pm_resume NULL
-#endif
-
-static struct syscore_ops osiris_pm_syscore_ops = {
-	.suspend	= osiris_pm_suspend,
-	.resume		= osiris_pm_resume,
-};
-
-/* Link for DVS driver to TPS65011 */
-
-static void osiris_tps_release(struct device *dev)
-{
-	/* static device, do not need to release anything */
-}
-
-static struct platform_device osiris_tps_device = {
-	.name	= "osiris-dvs",
-	.id	= -1,
-	.dev.release = osiris_tps_release,
-};
-
-static int osiris_tps_setup(struct i2c_client *client, void *context)
-{
-	osiris_tps_device.dev.parent = &client->dev;
-	return platform_device_register(&osiris_tps_device);
-}
-
-static int osiris_tps_remove(struct i2c_client *client, void *context)
-{
-	platform_device_unregister(&osiris_tps_device);
-	return 0;
-}
-
-static struct tps65010_board osiris_tps_board = {
-	.base		= -1,	/* GPIO can go anywhere at the moment */
-	.setup		= osiris_tps_setup,
-	.teardown	= osiris_tps_remove,
-};
-
-/* I2C devices fitted. */
-
-static struct i2c_board_info osiris_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("tps65011", 0x48),
-		.irq	= IRQ_EINT20,
-		.platform_data = &osiris_tps_board,
-	},
-};
-
-/* Standard Osiris devices */
-
-static struct platform_device *osiris_devices[] __initdata = {
-	&s3c2410_device_dclk,
-	&s3c_device_i2c0,
-	&s3c_device_wdt,
-	&s3c_device_nand,
-	&osiris_pcmcia,
-};
-
-static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
-	.refresh	= 7800, /* refresh period is 7.8usec */
-	.auto_io	= 1,
-	.need_io	= 1,
-};
-
-static void __init osiris_map_io(void)
-{
-	unsigned long flags;
-
-	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
-	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-
-	/* check for the newer revision boards with large page nand */
-
-	if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
-		printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
-		       __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
-		osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
-		osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
-	} else {
-		/* write-protect line to the NAND */
-		gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
-		gpio_free(S3C2410_GPA(0));
-	}
-
-	/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
-
-	local_irq_save(flags);
-	__raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
-	local_irq_restore(flags);
-}
-
-static void __init osiris_init_time(void)
-{
-	s3c2440_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init osiris_init(void)
-{
-	register_syscore_ops(&osiris_pm_syscore_ops);
-
-	s3c_i2c0_set_platdata(NULL);
-	s3c_nand_set_platdata(&osiris_nand_info);
-
-	s3c_cpufreq_setboard(&osiris_cpufreq);
-
-	i2c_register_board_info(0, osiris_i2c_devs,
-				ARRAY_SIZE(osiris_i2c_devs));
-
-	platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
-};
-
-MACHINE_START(OSIRIS, "Simtec-OSIRIS")
-	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2440,
-	.map_io		= osiris_map_io,
-	.init_irq	= s3c2440_init_irq,
-	.init_machine	= osiris_init,
-	.init_time	= osiris_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-otom.c b/arch/arm/mach-s3c/mach-otom.c
deleted file mode 100644
index 3a2db2f58833..000000000000
--- a/arch/arm/mach-s3c/mach-otom.c
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2004 Nex Vision
-//   Guillaume GOURAT <guillaume.gourat@nexvision.fr>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-
-#include "cpu.h"
-#include "devs.h"
-
-#include "s3c24xx.h"
-#include "otom.h"
-
-static struct map_desc otom11_iodesc[] __initdata = {
-  /* Device area */
-	{ (u32)OTOM_VA_CS8900A_BASE, OTOM_PA_CS8900A_BASE, SZ_16M, MT_DEVICE },
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg otom11_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	/* port 2 is not actually used */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* NOR Flash on NexVision OTOM board */
-
-static struct resource otom_nor_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_4M),
-};
-
-static struct platform_device otom_device_nor = {
-	.name		= "mtd-flash",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(otom_nor_resource),
-	.resource	= otom_nor_resource,
-};
-
-/* Standard OTOM devices */
-
-static struct platform_device *otom11_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
- 	&s3c_device_rtc,
-	&otom_device_nor,
-};
-
-static void __init otom11_map_io(void)
-{
-	s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
-	s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init otom11_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init otom11_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-	platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices));
-}
-
-MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
-	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.map_io		= otom11_map_io,
-	.init_machine	= otom11_init,
-	.init_irq	= s3c2410_init_irq,
-	.init_time	= otom11_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-qt2410.c b/arch/arm/mach-s3c/mach-qt2410.c
deleted file mode 100644
index 36fe0684a438..000000000000
--- a/arch/arm/mach-s3c/mach-qt2410.c
+++ /dev/null
@@ -1,375 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2006 by OpenMoko, Inc.
-// Author: Harald Welte <laforge@openmoko.org>
-// All rights reserved.
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/leds-s3c24xx.h>
-#include <linux/platform_data/fb-s3c2410.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "gpio-samsung.h"
-
-#include "gpio-cfg.h"
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
-
-#include "s3c24xx.h"
-#include "common-smdk-s3c24xx.h"
-
-static struct map_desc qt2410_iodesc[] __initdata = {
-	{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2410_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* LCD driver info */
-
-static struct s3c2410fb_display qt2410_lcd_cfg[] __initdata = {
-	{
-		/* Configuration for 640x480 SHARP LQ080V3DG01 */
-		.lcdcon5 = S3C2410_LCDCON5_FRM565 |
-			   S3C2410_LCDCON5_INVVLINE |
-			   S3C2410_LCDCON5_INVVFRAME |
-			   S3C2410_LCDCON5_PWREN |
-			   S3C2410_LCDCON5_HWSWP,
-
-		.type		= S3C2410_LCDCON1_TFT,
-		.width		= 640,
-		.height		= 480,
-
-		.pixclock	= 40000, /* HCLK/4 */
-		.xres		= 640,
-		.yres		= 480,
-		.bpp		= 16,
-		.left_margin	= 44,
-		.right_margin	= 116,
-		.hsync_len	= 96,
-		.upper_margin	= 19,
-		.lower_margin	= 11,
-		.vsync_len	= 15,
-	},
-	{
-		/* Configuration for 480x640 toppoly TD028TTEC1 */
-		.lcdcon5 = S3C2410_LCDCON5_FRM565 |
-			   S3C2410_LCDCON5_INVVLINE |
-			   S3C2410_LCDCON5_INVVFRAME |
-			   S3C2410_LCDCON5_PWREN |
-			   S3C2410_LCDCON5_HWSWP,
-
-		.type		= S3C2410_LCDCON1_TFT,
-		.width		= 480,
-		.height		= 640,
-		.pixclock	= 40000, /* HCLK/4 */
-		.xres		= 480,
-		.yres		= 640,
-		.bpp		= 16,
-		.left_margin	= 8,
-		.right_margin	= 24,
-		.hsync_len	= 8,
-		.upper_margin	= 2,
-		.lower_margin	= 4,
-		.vsync_len	= 2,
-	},
-	{
-		/* Config for 240x320 LCD */
-		.lcdcon5 = S3C2410_LCDCON5_FRM565 |
-			   S3C2410_LCDCON5_INVVLINE |
-			   S3C2410_LCDCON5_INVVFRAME |
-			   S3C2410_LCDCON5_PWREN |
-			   S3C2410_LCDCON5_HWSWP,
-
-		.type		= S3C2410_LCDCON1_TFT,
-		.width		= 240,
-		.height		= 320,
-		.pixclock	= 100000, /* HCLK/10 */
-		.xres		= 240,
-		.yres		= 320,
-		.bpp		= 16,
-		.left_margin	= 13,
-		.right_margin	= 8,
-		.hsync_len	= 4,
-		.upper_margin	= 2,
-		.lower_margin	= 7,
-		.vsync_len	= 4,
-	},
-};
-
-
-static struct s3c2410fb_mach_info qt2410_fb_info __initdata = {
-	.displays 	= qt2410_lcd_cfg,
-	.num_displays 	= ARRAY_SIZE(qt2410_lcd_cfg),
-	.default_display = 0,
-
-	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
-};
-
-/* CS8900 */
-
-static struct resource qt2410_cs89x0_resources[] = {
-	[0] = DEFINE_RES_MEM(0x19000000, 17),
-	[1] = DEFINE_RES_IRQ(IRQ_EINT9),
-};
-
-static struct platform_device qt2410_cs89x0 = {
-	.name		= "cirrus-cs89x0",
-	.num_resources	= ARRAY_SIZE(qt2410_cs89x0_resources),
-	.resource	= qt2410_cs89x0_resources,
-};
-
-/* LED */
-
-static struct gpiod_lookup_table qt2410_led_gpio_table = {
-	.dev_id = "s3c24xx_led.0",
-	.table = {
-		GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct s3c24xx_led_platdata qt2410_pdata_led = {
-	.name		= "led",
-	.def_trigger	= "timer",
-};
-
-static struct platform_device qt2410_led = {
-	.name		= "s3c24xx_led",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &qt2410_pdata_led,
-	},
-};
-
-/* SPI */
-
-static struct spi_gpio_platform_data spi_gpio_cfg = {
-	.num_chipselect	= 1,
-};
-
-static struct platform_device qt2410_spi = {
-	.name		= "spi_gpio",
-	.id		= 1,
-	.dev.platform_data = &spi_gpio_cfg,
-};
-
-static struct gpiod_lookup_table qt2410_spi_gpiod_table = {
-	.dev_id         = "spi_gpio",
-	.table          = {
-		GPIO_LOOKUP("GPIOG", 7,
-			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOG", 6,
-			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOG", 5,
-			    "miso", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOB", 5,
-			    "cs", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table qt2410_mmc_gpiod_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* Board devices */
-
-static struct platform_device *qt2410_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_sdi,
-	&s3c_device_usbgadget,
-	&qt2410_spi,
-	&qt2410_cs89x0,
-	&qt2410_led,
-};
-
-static struct mtd_partition __initdata qt2410_nand_part[] = {
-	[0] = {
-		.name	= "U-Boot",
-		.size	= 0x30000,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "U-Boot environment",
-		.offset = 0x30000,
-		.size	= 0x4000,
-	},
-	[2] = {
-		.name	= "kernel",
-		.offset = 0x34000,
-		.size	= SZ_2M,
-	},
-	[3] = {
-		.name	= "initrd",
-		.offset	= 0x234000,
-		.size	= SZ_4M,
-	},
-	[4] = {
-		.name	= "jffs2",
-		.offset = 0x634000,
-		.size	= 0x39cc000,
-	},
-};
-
-static struct s3c2410_nand_set __initdata qt2410_nand_sets[] = {
-	[0] = {
-		.name		= "NAND",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(qt2410_nand_part),
-		.partitions	= qt2410_nand_part,
-	},
-};
-
-/* choose a set of timings which should suit most 512Mbit
- * chips and beyond.
- */
-
-static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
-	.tacls		= 20,
-	.twrph0		= 60,
-	.twrph1		= 20,
-	.nr_sets	= ARRAY_SIZE(qt2410_nand_sets),
-	.sets		= qt2410_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-/* UDC */
-
-static struct s3c2410_udc_mach_info qt2410_udc_cfg = {
-};
-
-static char tft_type = 's';
-
-static int __init qt2410_tft_setup(char *str)
-{
-	tft_type = str[0];
-	return 1;
-}
-
-__setup("tft=", qt2410_tft_setup);
-
-static void __init qt2410_map_io(void)
-{
-	s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
-	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init qt2410_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init qt2410_machine_init(void)
-{
-	s3c_nand_set_platdata(&qt2410_nand_info);
-
-	switch (tft_type) {
-	case 'p': /* production */
-		qt2410_fb_info.default_display = 1;
-		break;
-	case 'b': /* big */
-		qt2410_fb_info.default_display = 0;
-		break;
-	case 's': /* small */
-	default:
-		qt2410_fb_info.default_display = 2;
-		break;
-	}
-	s3c24xx_fb_set_platdata(&qt2410_fb_info);
-
-	/* set initial state of the LED GPIO */
-	WARN_ON(gpio_request_one(S3C2410_GPB(0), GPIOF_OUT_INIT_HIGH, NULL));
-	gpio_free(S3C2410_GPB(0));
-
-	s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
-	s3c_i2c0_set_platdata(NULL);
-
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-	gpiod_add_lookup_table(&qt2410_spi_gpiod_table);
-	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
-	gpiod_add_lookup_table(&qt2410_led_gpio_table);
-	gpiod_add_lookup_table(&qt2410_mmc_gpiod_table);
-	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
-	s3c_pm_init();
-}
-
-MACHINE_START(QT2410, "QT2410")
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.map_io		= qt2410_map_io,
-	.init_irq	= s3c2410_init_irq,
-	.init_machine	= qt2410_machine_init,
-	.init_time	= qt2410_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-real6410.c b/arch/arm/mach-s3c/mach-real6410.c
deleted file mode 100644
index 8c10ebc38a9c..000000000000
--- a/arch/arm/mach-s3c/mach-real6410.c
+++ /dev/null
@@ -1,333 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//	http://armlinux.simtec.co.uk/
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/dm9000.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/types.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "map.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include "irqs.h"
-
-#include <linux/soc/samsung/s3c-adc.h>
-#include "cpu.h"
-#include "devs.h"
-#include "fb.h"
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include "s3c64xx.h"
-#include "regs-modem-s3c64xx.h"
-#include "regs-srom-s3c64xx.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	= 0,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[1] = {
-		.hwport	= 1,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[2] = {
-		.hwport	= 2,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[3] = {
-		.hwport	= 3,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource real6410_dm9k_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2),
-	[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2),
-	[2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \
-					| IORESOURCE_IRQ_HIGHLEVEL),
-};
-
-static struct dm9000_plat_data real6410_dm9k_pdata = {
-	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device real6410_device_eth = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(real6410_dm9k_resource),
-	.resource	= real6410_dm9k_resource,
-	.dev		= {
-		.platform_data	= &real6410_dm9k_pdata,
-	},
-};
-
-static struct s3c_fb_pd_win real6410_lcd_type0_fb_win = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 480,
-	.yres		= 272,
-};
-
-static struct fb_videomode real6410_lcd_type0_timing = {
-	/* 4.3" 480x272 */
-	.left_margin	= 3,
-	.right_margin	= 2,
-	.upper_margin	= 1,
-	.lower_margin	= 1,
-	.hsync_len	= 40,
-	.vsync_len	= 1,
-};
-
-static struct s3c_fb_pd_win real6410_lcd_type1_fb_win = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct fb_videomode real6410_lcd_type1_timing = {
-	/* 7.0" 800x480 */
-	.left_margin	= 8,
-	.right_margin	= 13,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-	.hsync_len	= 3,
-	.vsync_len	= 1,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct s3c_fb_platdata real6410_lcd_pdata[] __initdata = {
-	{
-		.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-		.vtiming	= &real6410_lcd_type0_timing,
-		.win[0]		= &real6410_lcd_type0_fb_win,
-		.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-		.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	}, {
-		.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-		.vtiming	= &real6410_lcd_type1_timing,
-		.win[0]		= &real6410_lcd_type1_fb_win,
-		.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-		.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	},
-	{ },
-};
-
-static struct mtd_partition real6410_nand_part[] = {
-	[0] = {
-		.name	= "uboot",
-		.size	= SZ_1M,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "kernel",
-		.size	= SZ_2M,
-		.offset	= SZ_1M,
-	},
-	[2] = {
-		.name	= "rootfs",
-		.size	= MTDPART_SIZ_FULL,
-		.offset	= SZ_1M + SZ_2M,
-	},
-};
-
-static struct s3c2410_nand_set real6410_nand_sets[] = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(real6410_nand_part),
-		.partitions	= real6410_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand real6410_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(real6410_nand_sets),
-	.sets		= real6410_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-static struct platform_device *real6410_devices[] __initdata = {
-	&real6410_device_eth,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_fb,
-	&s3c_device_nand,
-	&s3c_device_adc,
-	&s3c_device_ohci,
-};
-
-static void __init real6410_map_io(void)
-{
-	u32 tmp;
-
-	s3c64xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
-	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
-
-	/* set the LCD type */
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the LCD bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-/*
- * real6410_features string
- *
- * 0-9 LCD configuration
- *
- */
-static char real6410_features_str[12] __initdata = "0";
-
-static int __init real6410_features_setup(char *str)
-{
-	if (str)
-		strlcpy(real6410_features_str, str,
-			sizeof(real6410_features_str));
-	return 1;
-}
-
-__setup("real6410=", real6410_features_setup);
-
-#define FEATURE_SCREEN (1 << 0)
-
-struct real6410_features_t {
-	int done;
-	int lcd_index;
-};
-
-static void real6410_parse_features(
-		struct real6410_features_t *features,
-		const char *features_str)
-{
-	const char *fp = features_str;
-
-	features->done = 0;
-	features->lcd_index = 0;
-
-	while (*fp) {
-		char f = *fp++;
-
-		switch (f) {
-		case '0'...'9':	/* tft screen */
-			if (features->done & FEATURE_SCREEN) {
-				printk(KERN_INFO "REAL6410: '%c' ignored, "
-					"screen type already set\n", f);
-			} else {
-				int li = f - '0';
-				if (li >= ARRAY_SIZE(real6410_lcd_pdata))
-					printk(KERN_INFO "REAL6410: '%c' out "
-						"of range LCD mode\n", f);
-				else {
-					features->lcd_index = li;
-				}
-			}
-			features->done |= FEATURE_SCREEN;
-			break;
-		}
-	}
-}
-
-static void __init real6410_machine_init(void)
-{
-	u32 cs1;
-	struct real6410_features_t features = { 0 };
-
-	printk(KERN_INFO "REAL6410: Option string real6410=%s\n",
-			real6410_features_str);
-
-	/* Parse the feature string */
-	real6410_parse_features(&features, real6410_features_str);
-
-	printk(KERN_INFO "REAL6410: selected LCD display is %dx%d\n",
-		real6410_lcd_pdata[features.lcd_index].win[0]->xres,
-		real6410_lcd_pdata[features.lcd_index].win[0]->yres);
-
-	s3c_fb_set_platdata(&real6410_lcd_pdata[features.lcd_index]);
-	s3c_nand_set_platdata(&real6410_nand_info);
-	s3c64xx_ts_set_platdata(NULL);
-
-	/* configure nCS1 width to 16 bits */
-
-	cs1 = __raw_readl(S3C64XX_SROM_BW) &
-		~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
-			S3C64XX_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S3C64XX_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-
-	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
-		(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
-		(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
-		(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
-		(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
-		(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
-		(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
-
-	gpio_request(S3C64XX_GPF(15), "LCD power");
-
-	platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
-}
-
-MACHINE_START(REAL6410, "REAL6410")
-	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= real6410_map_io,
-	.init_machine	= real6410_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c
deleted file mode 100644
index 7a3e7c0a6484..000000000000
--- a/arch/arm/mach-s3c/mach-rx1950.c
+++ /dev/null
@@ -1,877 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
-// Copyright (c) 2007-2010 Vasily Khoruzhick
-//
-// based on smdk2440 written by Ben Dooks
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/device.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/pwm.h>
-#include <linux/s3c_adc_battery.h>
-#include <linux/leds.h>
-#include <linux/i2c.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/mmc/host.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/fb-s3c2410.h>
-
-#include <sound/uda1380.h>
-
-#include "hardware-s3c24xx.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "pm.h"
-#include "gpio-cfg.h"
-
-#include "s3c24xx.h"
-#include "h1940.h"
-
-#define LCD_PWM_PERIOD 192960
-#define LCD_PWM_DUTY 127353
-
-static struct map_desc rx1950_iodesc[] __initdata = {
-};
-
-static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
-	[0] = {
-	       .hwport = 0,
-	       .flags = 0,
-	       .ucon = 0x3c5,
-	       .ulcon = 0x03,
-	       .ufcon = 0x51,
-		.clk_sel = S3C2410_UCON_CLKSEL3,
-	},
-	[1] = {
-	       .hwport = 1,
-	       .flags = 0,
-	       .ucon = 0x3c5,
-	       .ulcon = 0x03,
-	       .ufcon = 0x51,
-		.clk_sel = S3C2410_UCON_CLKSEL3,
-	},
-	/* IR port */
-	[2] = {
-	       .hwport = 2,
-	       .flags = 0,
-	       .ucon = 0x3c5,
-	       .ulcon = 0x43,
-	       .ufcon = 0xf1,
-		.clk_sel = S3C2410_UCON_CLKSEL3,
-	},
-};
-
-static struct s3c2410fb_display rx1950_display = {
-	.type = S3C2410_LCDCON1_TFT,
-	.width = 240,
-	.height = 320,
-	.xres = 240,
-	.yres = 320,
-	.bpp = 16,
-
-	.pixclock = 260000,
-	.left_margin = 10,
-	.right_margin = 20,
-	.hsync_len = 10,
-	.upper_margin = 2,
-	.lower_margin = 2,
-	.vsync_len = 2,
-
-	.lcdcon5 = S3C2410_LCDCON5_FRM565 |
-			   S3C2410_LCDCON5_INVVCLK |
-			   S3C2410_LCDCON5_INVVLINE |
-			   S3C2410_LCDCON5_INVVFRAME |
-			   S3C2410_LCDCON5_HWSWP |
-			   (0x02 << 13) |
-			   (0x02 << 15),
-
-};
-
-static int power_supply_init(struct device *dev)
-{
-	return gpio_request(S3C2410_GPF(2), "cable plugged");
-}
-
-static int rx1950_is_ac_online(void)
-{
-	return !gpio_get_value(S3C2410_GPF(2));
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(S3C2410_GPF(2));
-}
-
-static char *rx1950_supplicants[] = {
-	"main-battery"
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init			= power_supply_init,
-	.is_ac_online		= rx1950_is_ac_online,
-	.exit			= power_supply_exit,
-	.supplied_to		= rx1950_supplicants,
-	.num_supplicants	= ARRAY_SIZE(rx1950_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
-	[0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \
-			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE),
-};
-
-static struct platform_device power_supply = {
-	.name			= "pda-power",
-	.id			= -1,
-	.dev			= {
-					.platform_data =
-						&power_supply_info,
-	},
-	.resource		= power_supply_resources,
-	.num_resources		= ARRAY_SIZE(power_supply_resources),
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
-	{ .volt = 4100, .cur = 156, .level = 100},
-	{ .volt = 4050, .cur = 156, .level = 95},
-	{ .volt = 4025, .cur = 141, .level = 90},
-	{ .volt = 3995, .cur = 144, .level = 85},
-	{ .volt = 3957, .cur = 162, .level = 80},
-	{ .volt = 3931, .cur = 147, .level = 75},
-	{ .volt = 3902, .cur = 147, .level = 70},
-	{ .volt = 3863, .cur = 153, .level = 65},
-	{ .volt = 3838, .cur = 150, .level = 60},
-	{ .volt = 3800, .cur = 153, .level = 55},
-	{ .volt = 3765, .cur = 153, .level = 50},
-	{ .volt = 3748, .cur = 172, .level = 45},
-	{ .volt = 3740, .cur = 153, .level = 40},
-	{ .volt = 3714, .cur = 175, .level = 35},
-	{ .volt = 3710, .cur = 156, .level = 30},
-	{ .volt = 3963, .cur = 156, .level = 25},
-	{ .volt = 3672, .cur = 178, .level = 20},
-	{ .volt = 3651, .cur = 178, .level = 15},
-	{ .volt = 3629, .cur = 178, .level = 10},
-	{ .volt = 3612, .cur = 162, .level = 5},
-	{ .volt = 3605, .cur = 162, .level = 0},
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
-	{ .volt = 4200, .cur = 0, .level = 100},
-	{ .volt = 4190, .cur = 0, .level = 99},
-	{ .volt = 4178, .cur = 0, .level = 95},
-	{ .volt = 4110, .cur = 0, .level = 70},
-	{ .volt = 4076, .cur = 0, .level = 65},
-	{ .volt = 4046, .cur = 0, .level = 60},
-	{ .volt = 4021, .cur = 0, .level = 55},
-	{ .volt = 3999, .cur = 0, .level = 50},
-	{ .volt = 3982, .cur = 0, .level = 45},
-	{ .volt = 3965, .cur = 0, .level = 40},
-	{ .volt = 3957, .cur = 0, .level = 35},
-	{ .volt = 3948, .cur = 0, .level = 30},
-	{ .volt = 3936, .cur = 0, .level = 25},
-	{ .volt = 3927, .cur = 0, .level = 20},
-	{ .volt = 3906, .cur = 0, .level = 15},
-	{ .volt = 3880, .cur = 0, .level = 10},
-	{ .volt = 3829, .cur = 0, .level = 5},
-	{ .volt = 3820, .cur = 0, .level = 0},
-};
-
-static struct gpiod_lookup_table rx1950_bat_gpio_table = {
-	.dev_id = "s3c-adc-battery",
-	.table = {
-		/* Charge status S3C2410_GPF(3) */
-		GPIO_LOOKUP("GPIOF", 3, "charge-status", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static int rx1950_bat_init(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1");
-	if (ret)
-		goto err_gpio1;
-	ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2");
-	if (ret)
-		goto err_gpio2;
-
-	return 0;
-
-err_gpio2:
-	gpio_free(S3C2410_GPJ(2));
-err_gpio1:
-	return ret;
-}
-
-static void rx1950_bat_exit(void)
-{
-	gpio_free(S3C2410_GPJ(2));
-	gpio_free(S3C2410_GPJ(3));
-}
-
-static void rx1950_enable_charger(void)
-{
-	gpio_direction_output(S3C2410_GPJ(2), 1);
-	gpio_direction_output(S3C2410_GPJ(3), 1);
-}
-
-static void rx1950_disable_charger(void)
-{
-	gpio_direction_output(S3C2410_GPJ(2), 0);
-	gpio_direction_output(S3C2410_GPJ(3), 0);
-}
-
-static DEFINE_SPINLOCK(rx1950_blink_spin);
-
-static int rx1950_led_blink_set(struct gpio_desc *desc, int state,
-	unsigned long *delay_on, unsigned long *delay_off)
-{
-	int gpio = desc_to_gpio(desc);
-	int blink_gpio, check_gpio;
-
-	switch (gpio) {
-	case S3C2410_GPA(6):
-		blink_gpio = S3C2410_GPA(4);
-		check_gpio = S3C2410_GPA(3);
-		break;
-	case S3C2410_GPA(7):
-		blink_gpio = S3C2410_GPA(3);
-		check_gpio = S3C2410_GPA(4);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (delay_on && delay_off && !*delay_on && !*delay_off)
-		*delay_on = *delay_off = 500;
-
-	spin_lock(&rx1950_blink_spin);
-
-	switch (state) {
-	case GPIO_LED_NO_BLINK_LOW:
-	case GPIO_LED_NO_BLINK_HIGH:
-		if (!gpio_get_value(check_gpio))
-			gpio_set_value(S3C2410_GPJ(6), 0);
-		gpio_set_value(blink_gpio, 0);
-		gpio_set_value(gpio, state);
-		break;
-	case GPIO_LED_BLINK:
-		gpio_set_value(gpio, 0);
-		gpio_set_value(S3C2410_GPJ(6), 1);
-		gpio_set_value(blink_gpio, 1);
-		break;
-	}
-
-	spin_unlock(&rx1950_blink_spin);
-
-	return 0;
-}
-
-static struct gpio_led rx1950_leds_desc[] = {
-	{
-		.name			= "Green",
-		.default_trigger	= "main-battery-full",
-		.gpio			= S3C2410_GPA(6),
-		.retain_state_suspended	= 1,
-	},
-	{
-		.name			= "Red",
-		.default_trigger
-			= "main-battery-charging-blink-full-solid",
-		.gpio			= S3C2410_GPA(7),
-		.retain_state_suspended	= 1,
-	},
-	{
-		.name			= "Blue",
-		.default_trigger	= "rx1950-acx-mem",
-		.gpio			= S3C2410_GPA(11),
-		.retain_state_suspended	= 1,
-	},
-};
-
-static struct gpio_led_platform_data rx1950_leds_pdata = {
-	.num_leds	= ARRAY_SIZE(rx1950_leds_desc),
-	.leds		= rx1950_leds_desc,
-	.gpio_blink_set	= rx1950_led_blink_set,
-};
-
-static struct platform_device rx1950_leds = {
-	.name	= "leds-gpio",
-	.id		= -1,
-	.dev	= {
-				.platform_data = &rx1950_leds_pdata,
-	},
-};
-
-static struct s3c_adc_bat_pdata rx1950_bat_cfg = {
-	.init = rx1950_bat_init,
-	.exit = rx1950_bat_exit,
-	.enable_charger = rx1950_enable_charger,
-	.disable_charger = rx1950_disable_charger,
-	.lut_noac = bat_lut_noac,
-	.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
-	.lut_acin = bat_lut_acin,
-	.lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
-	.volt_channel = 0,
-	.current_channel = 1,
-	.volt_mult = 4235,
-	.current_mult = 2900,
-	.internal_impedance = 200,
-};
-
-static struct platform_device rx1950_battery = {
-	.name             = "s3c-adc-battery",
-	.id               = -1,
-	.dev = {
-		.parent = &s3c_device_adc.dev,
-		.platform_data = &rx1950_bat_cfg,
-	},
-};
-
-static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
-	.displays = &rx1950_display,
-	.num_displays = 1,
-	.default_display = 0,
-
-	.lpcsel = 0x02,
-	.gpccon = 0xaa9556a9,
-	.gpccon_mask = 0xffc003fc,
-	.gpccon_reg = S3C2410_GPCCON,
-	.gpcup = 0x0000ffff,
-	.gpcup_mask = 0xffffffff,
-	.gpcup_reg = S3C2410_GPCUP,
-
-	.gpdcon = 0xaa90aaa1,
-	.gpdcon_mask = 0xffc0fff0,
-	.gpdcon_reg = S3C2410_GPDCON,
-	.gpdup = 0x0000fcfd,
-	.gpdup_mask = 0xffffffff,
-	.gpdup_reg = S3C2410_GPDUP,
-};
-
-static struct pwm_lookup rx1950_pwm_lookup[] = {
-	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight.0", NULL, 48000,
-		   PWM_POLARITY_NORMAL),
-	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", "RX1950 LCD", LCD_PWM_PERIOD,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct pwm_device *lcd_pwm;
-static struct pwm_state lcd_pwm_state;
-
-static void rx1950_lcd_power(int enable)
-{
-	int i;
-	static int enabled;
-	if (enabled == enable)
-		return;
-	if (!enable) {
-
-		/* GPC11-GPC15->OUTPUT */
-		for (i = 11; i < 16; i++)
-			gpio_direction_output(S3C2410_GPC(i), 1);
-
-		/* Wait a bit here... */
-		mdelay(100);
-
-		/* GPD2-GPD7->OUTPUT */
-		/* GPD11-GPD15->OUTPUT */
-		/* GPD2-GPD7->1, GPD11-GPD15->1 */
-		for (i = 2; i < 8; i++)
-			gpio_direction_output(S3C2410_GPD(i), 1);
-		for (i = 11; i < 16; i++)
-			gpio_direction_output(S3C2410_GPD(i), 1);
-
-		/* Wait a bit here...*/
-		mdelay(100);
-
-		/* GPB0->OUTPUT, GPB0->0 */
-		gpio_direction_output(S3C2410_GPB(0), 0);
-
-		/* GPC1-GPC4->OUTPUT, GPC1-4->0 */
-		for (i = 1; i < 5; i++)
-			gpio_direction_output(S3C2410_GPC(i), 0);
-
-		/* GPC15-GPC11->0 */
-		for (i = 11; i < 16; i++)
-			gpio_direction_output(S3C2410_GPC(i), 0);
-
-		/* GPD15-GPD11->0, GPD2->GPD7->0 */
-		for (i = 11; i < 16; i++)
-			gpio_direction_output(S3C2410_GPD(i), 0);
-
-		for (i = 2; i < 8; i++)
-			gpio_direction_output(S3C2410_GPD(i), 0);
-
-		/* GPC6->0, GPC7->0, GPC5->0 */
-		gpio_direction_output(S3C2410_GPC(6), 0);
-		gpio_direction_output(S3C2410_GPC(7), 0);
-		gpio_direction_output(S3C2410_GPC(5), 0);
-
-		/* GPB1->OUTPUT, GPB1->0 */
-		gpio_direction_output(S3C2410_GPB(1), 0);
-
-		lcd_pwm_state.enabled = false;
-		pwm_apply_state(lcd_pwm, &lcd_pwm_state);
-
-		/* GPC0->0, GPC10->0 */
-		gpio_direction_output(S3C2410_GPC(0), 0);
-		gpio_direction_output(S3C2410_GPC(10), 0);
-	} else {
-		lcd_pwm_state.enabled = true;
-		pwm_apply_state(lcd_pwm, &lcd_pwm_state);
-
-		gpio_direction_output(S3C2410_GPC(0), 1);
-		gpio_direction_output(S3C2410_GPC(5), 1);
-
-		s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
-		gpio_direction_output(S3C2410_GPC(7), 1);
-
-		for (i = 1; i < 5; i++)
-			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
-
-		for (i = 11; i < 16; i++)
-			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
-
-		for (i = 2; i < 8; i++)
-			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
-
-		for (i = 11; i < 16; i++)
-			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
-
-		gpio_direction_output(S3C2410_GPC(10), 1);
-		gpio_direction_output(S3C2410_GPC(6), 1);
-	}
-	enabled = enable;
-}
-
-static void rx1950_bl_power(int enable)
-{
-	static int enabled;
-	if (enabled == enable)
-		return;
-	if (!enable) {
-			gpio_direction_output(S3C2410_GPB(0), 0);
-	} else {
-			/* LED driver need a "push" to power on */
-			gpio_direction_output(S3C2410_GPB(0), 1);
-			/* Warm up backlight for one period of PWM.
-			 * Without this trick its almost impossible to
-			 * enable backlight with low brightness value
-			 */
-			ndelay(48000);
-			s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
-	}
-	enabled = enable;
-}
-
-static int rx1950_backlight_init(struct device *dev)
-{
-	WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
-	lcd_pwm = pwm_get(dev, "RX1950 LCD");
-	if (IS_ERR(lcd_pwm)) {
-		dev_err(dev, "Unable to request PWM for LCD power!\n");
-		return PTR_ERR(lcd_pwm);
-	}
-
-	/*
-	 * Call pwm_init_state to initialize .polarity and .period. The other
-	 * values are fixed in this driver.
-	 */
-	pwm_init_state(lcd_pwm, &lcd_pwm_state);
-
-	lcd_pwm_state.duty_cycle = LCD_PWM_DUTY;
-
-	rx1950_lcd_power(1);
-	rx1950_bl_power(1);
-
-	return 0;
-}
-
-static void rx1950_backlight_exit(struct device *dev)
-{
-	rx1950_bl_power(0);
-	rx1950_lcd_power(0);
-
-	pwm_put(lcd_pwm);
-	gpio_free(S3C2410_GPB(0));
-}
-
-
-static int rx1950_backlight_notify(struct device *dev, int brightness)
-{
-	if (!brightness) {
-		rx1950_bl_power(0);
-		rx1950_lcd_power(0);
-	} else {
-		rx1950_lcd_power(1);
-		rx1950_bl_power(1);
-	}
-	return brightness;
-}
-
-static struct platform_pwm_backlight_data rx1950_backlight_data = {
-	.max_brightness = 24,
-	.dft_brightness = 4,
-	.init = rx1950_backlight_init,
-	.notify = rx1950_backlight_notify,
-	.exit = rx1950_backlight_exit,
-};
-
-static struct platform_device rx1950_backlight = {
-	.name = "pwm-backlight",
-	.dev = {
-		.parent = &samsung_device_pwm.dev,
-		.platform_data = &rx1950_backlight_data,
-	},
-};
-
-static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
-{
-	s3c24xx_mci_def_set_power(power_mode, vdd);
-
-	switch (power_mode) {
-	case MMC_POWER_OFF:
-		gpio_direction_output(S3C2410_GPJ(1), 0);
-		break;
-	case MMC_POWER_UP:
-	case MMC_POWER_ON:
-		gpio_direction_output(S3C2410_GPJ(1), 1);
-		break;
-	default:
-		break;
-	}
-}
-
-static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
-	.set_power = rx1950_set_mmc_power,
-	.ocr_avail = MMC_VDD_32_33,
-};
-
-static struct gpiod_lookup_table rx1950_mmc_gpio_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* Card detect S3C2410_GPF(5) */
-		GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
-		/* Write protect S3C2410_GPH(8) */
-		GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct mtd_partition rx1950_nand_part[] = {
-	[0] = {
-			.name = "Boot0",
-			.offset = 0,
-			.size = 0x4000,
-			.mask_flags = MTD_WRITEABLE,
-	},
-	[1] = {
-			.name = "Boot1",
-			.offset = MTDPART_OFS_APPEND,
-			.size = 0x40000,
-			.mask_flags = MTD_WRITEABLE,
-	},
-	[2] = {
-			.name = "Kernel",
-			.offset = MTDPART_OFS_APPEND,
-			.size = 0x300000,
-			.mask_flags = 0,
-	},
-	[3] = {
-			.name = "Filesystem",
-			.offset = MTDPART_OFS_APPEND,
-			.size = MTDPART_SIZ_FULL,
-			.mask_flags = 0,
-	},
-};
-
-static struct s3c2410_nand_set rx1950_nand_sets[] = {
-	[0] = {
-			.name = "Internal",
-			.nr_chips = 1,
-			.nr_partitions = ARRAY_SIZE(rx1950_nand_part),
-			.partitions = rx1950_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand rx1950_nand_info = {
-	.tacls = 25,
-	.twrph0 = 50,
-	.twrph1 = 15,
-	.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
-	.sets = rx1950_nand_sets,
-	.engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
-	.vbus_pin = S3C2410_GPG(5),
-	.vbus_pin_inverted = 1,
-	.pullup_pin = S3C2410_GPJ(5),
-};
-
-static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
-	.delay = 10000,
-	.presc = 49,
-	.oversampling_shift = 3,
-};
-
-static struct gpio_keys_button rx1950_gpio_keys_table[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= S3C2410_GPF(0),
-		.active_low	= 1,
-		.desc		= "Power button",
-		.wakeup		= 1,
-	},
-	{
-		.code		= KEY_F5,
-		.gpio		= S3C2410_GPF(7),
-		.active_low	= 1,
-		.desc		= "Record button",
-	},
-	{
-		.code		= KEY_F1,
-		.gpio		= S3C2410_GPG(0),
-		.active_low	= 1,
-		.desc		= "Calendar button",
-	},
-	{
-		.code		= KEY_F2,
-		.gpio		= S3C2410_GPG(2),
-		.active_low	= 1,
-		.desc		= "Contacts button",
-	},
-	{
-		.code		= KEY_F3,
-		.gpio		= S3C2410_GPG(3),
-		.active_low	= 1,
-		.desc		= "Mail button",
-	},
-	{
-		.code		= KEY_F4,
-		.gpio		= S3C2410_GPG(7),
-		.active_low	= 1,
-		.desc		= "WLAN button",
-	},
-	{
-		.code		= KEY_LEFT,
-		.gpio		= S3C2410_GPG(10),
-		.active_low	= 1,
-		.desc		= "Left button",
-	},
-	{
-		.code		= KEY_RIGHT,
-		.gpio		= S3C2410_GPG(11),
-		.active_low	= 1,
-		.desc		= "Right button",
-	},
-	{
-		.code		= KEY_UP,
-		.gpio		= S3C2410_GPG(4),
-		.active_low	= 1,
-		.desc		= "Up button",
-	},
-	{
-		.code		= KEY_DOWN,
-		.gpio		= S3C2410_GPG(6),
-		.active_low	= 1,
-		.desc		= "Down button",
-	},
-	{
-		.code		= KEY_ENTER,
-		.gpio		= S3C2410_GPG(9),
-		.active_low	= 1,
-		.desc		= "Ok button"
-	},
-};
-
-static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
-	.buttons = rx1950_gpio_keys_table,
-	.nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
-};
-
-static struct platform_device rx1950_device_gpiokeys = {
-	.name = "gpio-keys",
-	.dev.platform_data = &rx1950_gpio_keys_data,
-};
-
-static struct uda1380_platform_data uda1380_info = {
-	.gpio_power	= S3C2410_GPJ(0),
-	.gpio_reset	= S3C2410_GPD(0),
-	.dac_clk	= UDA1380_DAC_CLK_SYSCLK,
-};
-
-static struct i2c_board_info rx1950_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("uda1380", 0x1a),
-		.platform_data = &uda1380_info,
-	},
-};
-
-static struct gpiod_lookup_table rx1950_audio_gpio_table = {
-	.dev_id = "rx1950-audio",
-	.table = {
-		GPIO_LOOKUP("GPIOG", 12, "hp-gpio", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOA", 1, "speaker-power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device rx1950_audio = {
-	.name = "rx1950-audio",
-	.id = -1,
-};
-
-static struct platform_device *rx1950_devices[] __initdata = {
-	&s3c2410_device_dclk,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_usbgadget,
-	&s3c_device_rtc,
-	&s3c_device_nand,
-	&s3c_device_sdi,
-	&s3c_device_adc,
-	&s3c_device_ts,
-	&samsung_device_pwm,
-	&rx1950_backlight,
-	&rx1950_device_gpiokeys,
-	&power_supply,
-	&rx1950_battery,
-	&rx1950_leds,
-	&rx1950_audio,
-};
-
-static void __init rx1950_map_io(void)
-{
-	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
-	s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-
-	/* setup PM */
-
-#ifdef CONFIG_PM_H1940
-	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
-#endif
-
-	s3c_pm_init();
-}
-
-static void __init rx1950_init_time(void)
-{
-	s3c2442_init_clocks(16934000);
-	s3c24xx_timer_init();
-}
-
-static void __init rx1950_init_machine(void)
-{
-	int i;
-
-	s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
-	s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
-	s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
-	gpiod_add_lookup_table(&rx1950_mmc_gpio_table);
-	s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
-	s3c_i2c0_set_platdata(NULL);
-	s3c_nand_set_platdata(&rx1950_nand_info);
-
-	/* Turn off suspend on both USB ports, and switch the
-	 * selectable USB port to USB device mode. */
-	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-						S3C2410_MISCCR_USBSUSPND0 |
-						S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-	/* mmc power is disabled by default */
-	WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
-	gpio_direction_output(S3C2410_GPJ(1), 0);
-
-	for (i = 0; i < 8; i++)
-		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
-
-	for (i = 10; i < 16; i++)
-		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
-
-	for (i = 2; i < 8; i++)
-		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
-
-	for (i = 11; i < 16; i++)
-		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
-
-	WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));
-
-	WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink"));
-	WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink"));
-	WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink"));
-	gpio_direction_output(S3C2410_GPA(3), 0);
-	gpio_direction_output(S3C2410_GPA(4), 0);
-	gpio_direction_output(S3C2410_GPJ(6), 0);
-
-	pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup));
-	gpiod_add_lookup_table(&rx1950_audio_gpio_table);
-	gpiod_add_lookup_table(&rx1950_bat_gpio_table);
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-	platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
-
-	i2c_register_board_info(0, rx1950_i2c_devices,
-		ARRAY_SIZE(rx1950_i2c_devices));
-}
-
-/* H1940 and RX3715 need to reserve this for suspend */
-static void __init rx1950_reserve(void)
-{
-	memblock_reserve(0x30003000, 0x1000);
-	memblock_reserve(0x30081000, 0x1000);
-}
-
-MACHINE_START(RX1950, "HP iPAQ RX1950")
-    /* Maintainers: Vasily Khoruzhick */
-	.atag_offset = 0x100,
-	.nr_irqs	= NR_IRQS_S3C2442,
-	.map_io = rx1950_map_io,
-	.reserve	= rx1950_reserve,
-	.init_irq	= s3c2442_init_irq,
-	.init_machine = rx1950_init_machine,
-	.init_time	= rx1950_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-rx3715.c b/arch/arm/mach-s3c/mach-rx3715.c
deleted file mode 100644
index 52b3c38acbb2..000000000000
--- a/arch/arm/mach-s3c/mach-rx3715.c
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2003-2004 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// https://www.handhelds.org/projects/rx3715.html
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/fb-s3c2410.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "pm.h"
-
-#include "s3c24xx.h"
-#include "h1940.h"
-
-static struct map_desc rx3715_iodesc[] __initdata = {
-	/* dump ISA space somewhere unused */
-	{
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-		.pfn		= __phys_to_pfn(S3C2410_CS3),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-		.clk_sel	= S3C2410_UCON_CLKSEL3,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x00,
-		.clk_sel	= S3C2410_UCON_CLKSEL3,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.uart_flags  = UPF_CONS_FLOW,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-		.clk_sel	= S3C2410_UCON_CLKSEL3,
-	}
-};
-
-/* framebuffer lcd controller information */
-
-static struct s3c2410fb_display rx3715_lcdcfg __initdata = {
-	.lcdcon5 =	S3C2410_LCDCON5_INVVLINE |
-			S3C2410_LCDCON5_FRM565 |
-			S3C2410_LCDCON5_HWSWP,
-
-	.type		= S3C2410_LCDCON1_TFT,
-	.width		= 240,
-	.height		= 320,
-
-	.pixclock	= 260000,
-	.xres		= 240,
-	.yres		= 320,
-	.bpp		= 16,
-	.left_margin	= 36,
-	.right_margin	= 36,
-	.hsync_len	= 8,
-	.upper_margin	= 6,
-	.lower_margin	= 7,
-	.vsync_len	= 3,
-};
-
-static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
-
-	.displays =	&rx3715_lcdcfg,
-	.num_displays =	1,
-	.default_display = 0,
-
-	.lpcsel =	0xf82,
-
-	.gpccon =	0xaa955699,
-	.gpccon_mask =	0xffc003cc,
-	.gpccon_reg =	S3C2410_GPCCON,
-	.gpcup =	0x0000ffff,
-	.gpcup_mask =	0xffffffff,
-	.gpcup_reg =	S3C2410_GPCUP,
-
-	.gpdcon =	0xaa95aaa1,
-	.gpdcon_mask =	0xffc0fff0,
-	.gpdcon_reg =	S3C2410_GPDCON,
-	.gpdup =	0x0000faff,
-	.gpdup_mask =	0xffffffff,
-	.gpdup_reg =	S3C2410_GPDUP,
-};
-
-static struct mtd_partition __initdata rx3715_nand_part[] = {
-	[0] = {
-		.name		= "Whole Flash",
-		.offset		= 0,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= MTD_WRITEABLE,
-	}
-};
-
-static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
-	[0] = {
-		.name		= "Internal",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(rx3715_nand_part),
-		.partitions	= rx3715_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 50,
-	.twrph1		= 15,
-	.nr_sets	= ARRAY_SIZE(rx3715_nand_sets),
-	.sets		= rx3715_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-static struct platform_device *rx3715_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_nand,
-};
-
-static void __init rx3715_map_io(void)
-{
-	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
-	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init rx3715_init_time(void)
-{
-	s3c2440_init_clocks(16934000);
-	s3c24xx_timer_init();
-}
-
-/* H1940 and RX3715 need to reserve this for suspend */
-static void __init rx3715_reserve(void)
-{
-	memblock_reserve(0x30003000, 0x1000);
-	memblock_reserve(0x30081000, 0x1000);
-}
-
-static void __init rx3715_init_machine(void)
-{
-#ifdef CONFIG_PM_H1940
-	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
-#endif
-	s3c_pm_init();
-
-	s3c_nand_set_platdata(&rx3715_nand_info);
-	s3c24xx_fb_set_platdata(&rx3715_fb_info);
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-	platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
-}
-
-MACHINE_START(RX3715, "IPAQ-RX3715")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2440,
-	.map_io		= rx3715_map_io,
-	.reserve	= rx3715_reserve,
-	.init_irq	= s3c2440_init_irq,
-	.init_machine	= rx3715_init_machine,
-	.init_time	= rx3715_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-s3c2416-dt.c b/arch/arm/mach-s3c/mach-s3c2416-dt.c
deleted file mode 100644
index 418544d3015d..000000000000
--- a/arch/arm/mach-s3c/mach-s3c2416-dt.c
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Samsung's S3C2416 flattened device tree enabled machine
-//
-// Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
-//
-// based on mach-exynos/mach-exynos4-dt.c
-//
-// Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
-//		http://www.samsung.com
-// Copyright (c) 2010-2011 Linaro Ltd.
-//		www.linaro.org
-
-#include <linux/clocksource.h>
-#include <linux/irqchip.h>
-#include <linux/serial_s3c.h>
-
-#include <asm/mach/arch.h>
-#include "map.h"
-
-#include "cpu.h"
-#include "pm.h"
-
-#include "s3c24xx.h"
-
-static void __init s3c2416_dt_map_io(void)
-{
-	s3c24xx_init_io(NULL, 0);
-}
-
-static void __init s3c2416_dt_machine_init(void)
-{
-	s3c_pm_init();
-}
-
-static const char *const s3c2416_dt_compat[] __initconst = {
-	"samsung,s3c2416",
-	"samsung,s3c2450",
-	NULL
-};
-
-DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)")
-	/* Maintainer: Heiko Stuebner <heiko@sntech.de> */
-	.dt_compat	= s3c2416_dt_compat,
-	.map_io		= s3c2416_dt_map_io,
-	.init_irq	= irqchip_init,
-	.init_machine	= s3c2416_dt_machine_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smartq.c b/arch/arm/mach-s3c/mach-smartq.c
deleted file mode 100644
index 5b6e7c2a85ef..000000000000
--- a/arch/arm/mach-s3c/mach-smartq.c
+++ /dev/null
@@ -1,424 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2010 Maurus Cuelenaere
-
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/platform_data/s3c-hsotg.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-
-#include "map.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "gpio-cfg.h"
-#include <linux/platform_data/hwmon-s3c.h>
-#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include "sdhci.h"
-#include <linux/platform_data/touchscreen-s3c2410.h>
-
-#include <video/platform_lcd.h>
-
-#include "s3c64xx.h"
-#include "mach-smartq.h"
-#include "regs-modem-s3c64xx.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg smartq_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-};
-
-static void smartq_usb_host_powercontrol(int port, int to)
-{
-	pr_debug("%s(%d, %d)\n", __func__, port, to);
-
-	if (port == 0) {
-		gpio_set_value(S3C64XX_GPL(0), to);
-		gpio_set_value(S3C64XX_GPL(1), to);
-	}
-}
-
-static irqreturn_t smartq_usb_host_ocirq(int irq, void *pw)
-{
-	struct s3c2410_hcd_info *info = pw;
-
-	if (gpio_get_value(S3C64XX_GPL(10)) == 0) {
-		pr_debug("%s: over-current irq (oc detected)\n", __func__);
-		s3c2410_usb_report_oc(info, 3);
-	} else {
-		pr_debug("%s: over-current irq (oc cleared)\n", __func__);
-		s3c2410_usb_report_oc(info, 0);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on)
-{
-	int ret;
-
-	/* This isn't present on a SmartQ 5 board */
-	if (machine_is_smartq5())
-		return;
-
-	if (on) {
-		ret = request_irq(gpio_to_irq(S3C64XX_GPL(10)),
-				  smartq_usb_host_ocirq,
-				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				  "USB host overcurrent", info);
-		if (ret != 0)
-			pr_err("failed to request usb oc irq: %d\n", ret);
-	} else {
-		free_irq(gpio_to_irq(S3C64XX_GPL(10)), info);
-	}
-}
-
-static struct s3c2410_hcd_info smartq_usb_host_info = {
-	.port[0]	= {
-		.flags	= S3C_HCDFLG_USED
-	},
-	.port[1]	= {
-		.flags	= 0
-	},
-
-	.power_control	= smartq_usb_host_powercontrol,
-	.enable_oc	= smartq_usb_host_enableoc,
-};
-
-static struct gpiod_lookup_table smartq_usb_otg_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("GPL", 9, "vbus", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct platform_device smartq_usb_otg_vbus_dev = {
-	.name			= "gpio-vbus",
-};
-
-static struct pwm_lookup smartq_pwm_lookup[] = {
-	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
-		   1000000000 / (1000 * 20), PWM_POLARITY_NORMAL),
-};
-
-static int smartq_bl_init(struct device *dev)
-{
-    s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
-
-    return 0;
-}
-
-static struct platform_pwm_backlight_data smartq_backlight_data = {
-	.max_brightness	= 1000,
-	.dft_brightness	= 600,
-	.init		= smartq_bl_init,
-};
-
-static struct platform_device smartq_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent	= &samsung_device_pwm.dev,
-		.platform_data = &smartq_backlight_data,
-	},
-};
-
-static struct s3c2410_ts_mach_info smartq_touchscreen_pdata __initdata = {
-	.delay			= 65535,
-	.presc			= 99,
-	.oversampling_shift	= 4,
-};
-
-static struct s3c_sdhci_platdata smartq_internal_hsmmc_pdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-};
-
-static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
-	/* Battery voltage (?-4.2V) */
-	.in[0] = &(struct s3c_hwmon_chcfg) {
-		.name		= "smartq:battery-voltage",
-		.mult		= 3300,
-		.div		= 2048,
-	},
-	/* Reference voltage (1.2V) */
-	.in[1] = &(struct s3c_hwmon_chcfg) {
-		.name		= "smartq:reference-voltage",
-		.mult		= 3300,
-		.div		= 4096,
-	},
-};
-
-static struct dwc2_hsotg_plat smartq_hsotg_pdata;
-
-static int __init smartq_lcd_setup_gpio(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPM(3), "LCD power");
-	if (ret < 0)
-		return ret;
-
-	/* turn power off */
-	gpio_direction_output(S3C64XX_GPM(3), 0);
-
-	return 0;
-}
-
-/* GPM0 -> CS */
-static struct spi_gpio_platform_data smartq_lcd_control = {
-	.num_chipselect	= 1,
-};
-
-static struct platform_device smartq_lcd_control_device = {
-	.name			= "spi_gpio",
-	.id			= 1,
-	.dev.platform_data	= &smartq_lcd_control,
-};
-
-static struct gpiod_lookup_table smartq_lcd_control_gpiod_table = {
-	.dev_id         = "spi_gpio",
-	.table          = {
-		GPIO_LOOKUP("GPIOM", 1,
-			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOM", 2,
-			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOM", 3,
-			    "miso", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOM", 0,
-			    "cs", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
-{
-	gpio_direction_output(S3C64XX_GPM(3), power);
-}
-
-static struct plat_lcd_data smartq_lcd_power_data = {
-	.set_power	= smartq_lcd_power_set,
-};
-
-static struct platform_device smartq_lcd_power_device = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &smartq_lcd_power_data,
-};
-
-static struct i2c_board_info smartq_i2c_devs[] __initdata = {
-	{ I2C_BOARD_INFO("wm8987", 0x1a), },
-};
-
-static struct platform_device *smartq_devices[] __initdata = {
-	&s3c_device_hsmmc1,	/* Init iNAND first, ... */
-	&s3c_device_hsmmc0,	/* ... then the external SD card */
-	&s3c_device_hsmmc2,
-	&s3c_device_adc,
-	&s3c_device_fb,
-	&s3c_device_hwmon,
-	&s3c_device_i2c0,
-	&s3c_device_ohci,
-	&s3c_device_rtc,
-	&samsung_device_pwm,
-	&s3c_device_usb_hsotg,
-	&s3c64xx_device_iis0,
-	&smartq_backlight_device,
-	&smartq_lcd_control_device,
-	&smartq_lcd_power_device,
-	&smartq_usb_otg_vbus_dev,
-};
-
-static void __init smartq_lcd_mode_set(void)
-{
-	u32 tmp;
-
-	/* set the LCD type */
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the LCD bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-static void smartq_power_off(void)
-{
-	gpio_direction_output(S3C64XX_GPK(15), 1);
-}
-
-static int __init smartq_power_off_init(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPK(15), "Power control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPK15\n", __func__);
-		return ret;
-	}
-
-	/* leave power on */
-	gpio_direction_output(S3C64XX_GPK(15), 0);
-
-	pm_power_off = smartq_power_off;
-
-	return ret;
-}
-
-static int __init smartq_usb_host_init(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPL(0), "USB power control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPL0\n", __func__);
-		return ret;
-	}
-
-	ret = gpio_request(S3C64XX_GPL(1), "USB host power control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPL1\n", __func__);
-		goto err;
-	}
-
-	if (!machine_is_smartq5()) {
-		/* This isn't present on a SmartQ 5 board */
-		ret = gpio_request(S3C64XX_GPL(10), "USB host overcurrent");
-		if (ret < 0) {
-			pr_err("%s: failed to get GPL10\n", __func__);
-			goto err2;
-		}
-	}
-
-	/* turn power off */
-	gpio_direction_output(S3C64XX_GPL(0), 0);
-	gpio_direction_output(S3C64XX_GPL(1), 0);
-	if (!machine_is_smartq5())
-		gpio_direction_input(S3C64XX_GPL(10));
-
-	s3c_device_ohci.dev.platform_data = &smartq_usb_host_info;
-
-	return 0;
-
-err2:
-	gpio_free(S3C64XX_GPL(1));
-err:
-	gpio_free(S3C64XX_GPL(0));
-	return ret;
-}
-
-static int __init smartq_wifi_init(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPK(1), "wifi control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPK1\n", __func__);
-		return ret;
-	}
-
-	ret = gpio_request(S3C64XX_GPK(2), "wifi reset");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPK2\n", __func__);
-		gpio_free(S3C64XX_GPK(1));
-		return ret;
-	}
-
-	/* turn power on */
-	gpio_direction_output(S3C64XX_GPK(1), 1);
-
-	/* reset device */
-	gpio_direction_output(S3C64XX_GPK(2), 0);
-	mdelay(100);
-	gpio_set_value(S3C64XX_GPK(2), 1);
-	gpio_direction_input(S3C64XX_GPK(2));
-
-	return 0;
-}
-
-static struct map_desc smartq_iodesc[] __initdata = {};
-void __init smartq_map_io(void)
-{
-	s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
-	s3c64xx_set_xtal_freq(12000000);
-	s3c64xx_set_xusbxti_freq(12000000);
-	s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
-	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
-
-	smartq_lcd_mode_set();
-}
-
-static struct gpiod_lookup_table smartq_audio_gpios = {
-	.dev_id = "smartq-audio",
-	.table = {
-		GPIO_LOOKUP("GPL", 12, "headphone detect", 0),
-		GPIO_LOOKUP("GPK", 12, "amplifiers shutdown", 0),
-		{ },
-	},
-};
-
-void __init smartq_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	dwc2_hsotg_set_platdata(&smartq_hsotg_pdata);
-	s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
-	s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
-	s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
-	s3c64xx_ts_set_platdata(&smartq_touchscreen_pdata);
-
-	i2c_register_board_info(0, smartq_i2c_devs,
-				ARRAY_SIZE(smartq_i2c_devs));
-
-	WARN_ON(smartq_lcd_setup_gpio());
-	WARN_ON(smartq_power_off_init());
-	WARN_ON(smartq_usb_host_init());
-	WARN_ON(smartq_wifi_init());
-
-	pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup));
-	gpiod_add_lookup_table(&smartq_lcd_control_gpiod_table);
-	gpiod_add_lookup_table(&smartq_usb_otg_vbus_gpiod_table);
-	platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
-
-	gpiod_add_lookup_table(&smartq_audio_gpios);
-	platform_device_register_simple("smartq-audio", -1, NULL, 0);
-}
diff --git a/arch/arm/mach-s3c/mach-smartq.h b/arch/arm/mach-s3c/mach-smartq.h
deleted file mode 100644
index f98132f4f430..000000000000
--- a/arch/arm/mach-s3c/mach-smartq.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * linux/arch/arm/mach-s3c64xx/mach-smartq.h
- *
- * Copyright (C) 2010 Maurus Cuelenaere
- */
-
-#ifndef __MACH_SMARTQ_H
-#define __MACH_SMARTQ_H __FILE__
-
-#include <linux/init.h>
-
-extern void __init smartq_map_io(void);
-extern void __init smartq_machine_init(void);
-
-#endif /* __MACH_SMARTQ_H */
diff --git a/arch/arm/mach-s3c/mach-smartq5.c b/arch/arm/mach-s3c/mach-smartq5.c
deleted file mode 100644
index ce3fce0bba20..000000000000
--- a/arch/arm/mach-s3c/mach-smartq5.c
+++ /dev/null
@@ -1,154 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2010 Maurus Cuelenaere
-
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <video/samsung_fimd.h>
-#include "irqs.h"
-#include "map.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "fb.h"
-#include "gpio-cfg.h"
-
-#include "s3c64xx.h"
-#include "mach-smartq.h"
-
-static struct gpio_led smartq5_leds[] = {
-	{
-		.name			= "smartq5:green",
-		.active_low		= 1,
-		.gpio			= S3C64XX_GPN(8),
-	},
-	{
-		.name			= "smartq5:red",
-		.active_low		= 1,
-		.gpio			= S3C64XX_GPN(9),
-	},
-};
-
-static struct gpio_led_platform_data smartq5_led_data = {
-	.num_leds = ARRAY_SIZE(smartq5_leds),
-	.leds = smartq5_leds,
-};
-
-static struct platform_device smartq5_leds_device = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &smartq5_led_data,
-};
-
-/* Labels according to the SmartQ manual */
-static struct gpio_keys_button smartq5_buttons[] = {
-	{
-		.gpio			= S3C64XX_GPL(14),
-		.code			= KEY_POWER,
-		.desc			= "Power",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(2),
-		.code			= KEY_KPMINUS,
-		.desc			= "Minus",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(12),
-		.code			= KEY_KPPLUS,
-		.desc			= "Plus",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(15),
-		.code			= KEY_ENTER,
-		.desc			= "Move",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-};
-
-static struct gpio_keys_platform_data smartq5_buttons_data  = {
-	.buttons	= smartq5_buttons,
-	.nbuttons	= ARRAY_SIZE(smartq5_buttons),
-};
-
-static struct platform_device smartq5_buttons_device  = {
-	.name		= "gpio-keys",
-	.id		= 0,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &smartq5_buttons_data,
-	}
-};
-
-static struct s3c_fb_pd_win smartq5_fb_win0 = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct fb_videomode smartq5_lcd_timing = {
-	.left_margin	= 216,
-	.right_margin	= 40,
-	.upper_margin	= 35,
-	.lower_margin	= 10,
-	.hsync_len	= 1,
-	.vsync_len	= 1,
-	.xres		= 800,
-	.yres		= 480,
-	.refresh	= 80,
-};
-
-static struct s3c_fb_platdata smartq5_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.vtiming	= &smartq5_lcd_timing,
-	.win[0]		= &smartq5_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
-			  VIDCON1_INV_VDEN,
-};
-
-static struct platform_device *smartq5_devices[] __initdata = {
-	&smartq5_leds_device,
-	&smartq5_buttons_device,
-};
-
-static void __init smartq5_machine_init(void)
-{
-	s3c_fb_set_platdata(&smartq5_lcd_pdata);
-
-	smartq_machine_init();
-
-	platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices));
-}
-
-MACHINE_START(SMARTQ5, "SmartQ 5")
-	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= smartq_map_io,
-	.init_machine	= smartq5_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smartq7.c b/arch/arm/mach-s3c/mach-smartq7.c
deleted file mode 100644
index 78ca0e704797..000000000000
--- a/arch/arm/mach-s3c/mach-smartq7.c
+++ /dev/null
@@ -1,170 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2010 Maurus Cuelenaere
-
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <video/samsung_fimd.h>
-#include "irqs.h"
-#include "map.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "fb.h"
-#include "gpio-cfg.h"
-
-#include "s3c64xx.h"
-#include "mach-smartq.h"
-
-static struct gpio_led smartq7_leds[] = {
-	{
-		.name			= "smartq7:red",
-		.active_low		= 1,
-		.gpio			= S3C64XX_GPN(8),
-	},
-	{
-		.name			= "smartq7:green",
-		.active_low		= 1,
-		.gpio			= S3C64XX_GPN(9),
-	},
-};
-
-static struct gpio_led_platform_data smartq7_led_data = {
-	.num_leds = ARRAY_SIZE(smartq7_leds),
-	.leds = smartq7_leds,
-};
-
-static struct platform_device smartq7_leds_device = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &smartq7_led_data,
-};
-
-/* Labels according to the SmartQ manual */
-static struct gpio_keys_button smartq7_buttons[] = {
-	{
-		.gpio			= S3C64XX_GPL(14),
-		.code			= KEY_POWER,
-		.desc			= "Power",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(2),
-		.code			= KEY_FN,
-		.desc			= "Function",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(3),
-		.code			= KEY_KPMINUS,
-		.desc			= "Minus",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(4),
-		.code			= KEY_KPPLUS,
-		.desc			= "Plus",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(12),
-		.code			= KEY_ENTER,
-		.desc			= "Enter",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(15),
-		.code			= KEY_ESC,
-		.desc			= "Cancel",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-};
-
-static struct gpio_keys_platform_data smartq7_buttons_data  = {
-	.buttons	= smartq7_buttons,
-	.nbuttons	= ARRAY_SIZE(smartq7_buttons),
-};
-
-static struct platform_device smartq7_buttons_device  = {
-	.name		= "gpio-keys",
-	.id		= 0,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &smartq7_buttons_data,
-	}
-};
-
-static struct s3c_fb_pd_win smartq7_fb_win0 = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct fb_videomode smartq7_lcd_timing = {
-	.left_margin	= 3,
-	.right_margin	= 5,
-	.upper_margin	= 1,
-	.lower_margin	= 20,
-	.hsync_len	= 10,
-	.vsync_len	= 3,
-	.xres		= 800,
-	.yres		= 480,
-	.refresh	= 80,
-};
-
-static struct s3c_fb_platdata smartq7_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.vtiming	= &smartq7_lcd_timing,
-	.win[0]		= &smartq7_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
-			  VIDCON1_INV_VCLK,
-};
-
-static struct platform_device *smartq7_devices[] __initdata = {
-	&smartq7_leds_device,
-	&smartq7_buttons_device,
-};
-
-static void __init smartq7_machine_init(void)
-{
-	s3c_fb_set_platdata(&smartq7_lcd_pdata);
-
-	smartq_machine_init();
-
-	platform_add_devices(smartq7_devices, ARRAY_SIZE(smartq7_devices));
-}
-
-MACHINE_START(SMARTQ7, "SmartQ 7")
-	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= smartq_map_io,
-	.init_machine	= smartq7_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk2410.c b/arch/arm/mach-s3c/mach-smdk2410.c
deleted file mode 100644
index 76b0a8846616..000000000000
--- a/arch/arm/mach-s3c/mach-smdk2410.c
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2004 by FS Forth-Systeme GmbH
-// All rights reserved.
-//
-// @Author: Jonas Dietsche
-//
-// @History:
-// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
-// Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "devs.h"
-#include "cpu.h"
-
-#include "s3c24xx.h"
-#include "common-smdk-s3c24xx.h"
-
-static struct map_desc smdk2410_iodesc[] __initdata = {
-  /* nothing here yet */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-static struct platform_device *smdk2410_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-};
-
-static void __init smdk2410_map_io(void)
-{
-	s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
-	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init smdk2410_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init smdk2410_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices));
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-	smdk_machine_init();
-}
-
-MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
-				    * to SMDK2410 */
-	/* Maintainer: Jonas Dietsche */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.map_io		= smdk2410_map_io,
-	.init_irq	= s3c2410_init_irq,
-	.init_machine	= smdk2410_init,
-	.init_time	= smdk2410_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk2413.c b/arch/arm/mach-s3c/mach-smdk2413.c
deleted file mode 100644
index f1f0ec174579..000000000000
--- a/arch/arm/mach-s3c/mach-smdk2413.c
+++ /dev/null
@@ -1,163 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// Thanks to Dimity Andric (TomTom) and Steven Ryu (Samsung) for the
-// loans of SMDK2413 to work with.
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/memblock.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/hardware/iomd.h>
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-//#include <asm/debug-ll.h>
-#include "hardware-s3c24xx.h"
-#include "regs-gpio.h"
-
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/fb-s3c2410.h>
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-
-#include "devs.h"
-#include "cpu.h"
-
-#include "s3c24xx.h"
-#include "common-smdk-s3c24xx.h"
-
-static struct map_desc smdk2413_iodesc[] __initdata = {
-};
-
-static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-	}
-};
-
-
-static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
-	.pullup_pin = S3C2410_GPF(2),
-};
-
-
-static struct platform_device *smdk2413_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_usbgadget,
-	&s3c2412_device_dma,
-};
-
-static void __init smdk2413_fixup(struct tag *tags, char **cmdline)
-{
-	if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
-		memblock_add(0x30000000, SZ_64M);
-	}
-}
-
-static void __init smdk2413_map_io(void)
-{
-	s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
-	s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init smdk2413_init_time(void)
-{
-	s3c2412_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init smdk2413_machine_init(void)
-{	/* Turn off suspend on both USB ports, and switch the
-	 * selectable USB port to USB device mode. */
-
-	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-			      S3C2410_MISCCR_USBSUSPND0 |
-			      S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-
- 	s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
-	s3c_i2c0_set_platdata(NULL);
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-
-	platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
-	smdk_machine_init();
-}
-
-MACHINE_START(S3C2413, "S3C2413")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2412,
-
-	.fixup		= smdk2413_fixup,
-	.init_irq	= s3c2412_init_irq,
-	.map_io		= smdk2413_map_io,
-	.init_machine	= smdk2413_machine_init,
-	.init_time	= s3c24xx_timer_init,
-MACHINE_END
-
-MACHINE_START(SMDK2412, "SMDK2412")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2412,
-
-	.fixup		= smdk2413_fixup,
-	.init_irq	= s3c2412_init_irq,
-	.map_io		= smdk2413_map_io,
-	.init_machine	= smdk2413_machine_init,
-	.init_time	= s3c24xx_timer_init,
-MACHINE_END
-
-MACHINE_START(SMDK2413, "SMDK2413")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2412,
-
-	.fixup		= smdk2413_fixup,
-	.init_irq	= s3c2412_init_irq,
-	.map_io		= smdk2413_map_io,
-	.init_machine	= smdk2413_machine_init,
-	.init_time	= smdk2413_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk2416.c b/arch/arm/mach-s3c/mach-smdk2416.c
deleted file mode 100644
index 329fe26be268..000000000000
--- a/arch/arm/mach-s3c/mach-smdk2416.c
+++ /dev/null
@@ -1,248 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
-//	as part of OpenInkpot project
-// Copyright (c) 2009 Promwad Innovation Company
-//	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mtd/partitions.h>
-#include <linux/gpio.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <video/samsung_fimd.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "hardware-s3c24xx.h"
-#include "regs-gpio.h"
-#include "regs-s3c2443-clock.h"
-#include "gpio-samsung.h"
-
-#include <linux/platform_data/leds-s3c24xx.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "gpio-cfg.h"
-#include "devs.h"
-#include "cpu.h"
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include "sdhci.h"
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/s3c-hsudc.h>
-
-#include "fb.h"
-
-#include "s3c24xx.h"
-#include "common-smdk-s3c24xx.h"
-
-static struct map_desc smdk2416_iodesc[] __initdata = {
-	/* ISA IO Space map (memory space selected by A24) */
-
-	{
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}
-};
-
-#define UCON (S3C2410_UCON_DEFAULT	| \
-		S3C2440_UCON_PCLK	| \
-		S3C2443_UCON_RXERR_IRQEN)
-
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-
-#define UFCON (S3C2410_UFCON_RXTRIG8	| \
-		S3C2410_UFCON_FIFOMODE	| \
-		S3C2440_UFCON_TXTRIG16)
-
-static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON | 0x50,
-		.ufcon	     = UFCON,
-	},
-	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-static void smdk2416_hsudc_gpio_init(void)
-{
-	s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_UP);
-	s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_NONE);
-	s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(1));
-	s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 0);
-}
-
-static void smdk2416_hsudc_gpio_uninit(void)
-{
-	s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 1);
-	s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_NONE);
-	s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(0));
-}
-
-static struct s3c24xx_hsudc_platdata smdk2416_hsudc_platdata = {
-	.epnum = 9,
-	.gpio_init = smdk2416_hsudc_gpio_init,
-	.gpio_uninit = smdk2416_hsudc_gpio_uninit,
-};
-
-static struct s3c_fb_pd_win smdk2416_fb_win[] = {
-	[0] = {
-		.default_bpp	= 16,
-		.max_bpp	= 32,
-		.xres           = 800,
-		.yres           = 480,
-	},
-};
-
-static struct fb_videomode smdk2416_lcd_timing = {
-	.pixclock	= 41094,
-	.left_margin	= 8,
-	.right_margin	= 13,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-	.hsync_len	= 3,
-	.vsync_len	= 1,
-	.xres           = 800,
-	.yres           = 480,
-};
-
-static void s3c2416_fb_gpio_setup_24bpp(void)
-{
-	unsigned int gpio;
-
-	for (gpio = S3C2410_GPC(1); gpio <= S3C2410_GPC(4); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S3C2410_GPC(8); gpio <= S3C2410_GPC(15); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S3C2410_GPD(0); gpio <= S3C2410_GPD(15); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-}
-
-static struct s3c_fb_platdata smdk2416_fb_platdata = {
-	.win[0]		= &smdk2416_fb_win[0],
-	.vtiming	= &smdk2416_lcd_timing,
-	.setup_gpio	= s3c2416_fb_gpio_setup_24bpp,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-static struct s3c_sdhci_platdata smdk2416_hsmmc0_pdata __initdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= S3C2410_GPF(1),
-	.ext_cd_gpio_invert	= 1,
-};
-
-static struct s3c_sdhci_platdata smdk2416_hsmmc1_pdata __initdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_NONE,
-};
-
-static struct platform_device *smdk2416_devices[] __initdata = {
-	&s3c_device_fb,
-	&s3c_device_wdt,
-	&s3c_device_ohci,
-	&s3c_device_i2c0,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_usb_hsudc,
-	&s3c2443_device_dma,
-};
-
-static void __init smdk2416_init_time(void)
-{
-	s3c2416_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init smdk2416_map_io(void)
-{
-	s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
-	s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init smdk2416_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	s3c_fb_set_platdata(&smdk2416_fb_platdata);
-
-	s3c_sdhci0_set_platdata(&smdk2416_hsmmc0_pdata);
-	s3c_sdhci1_set_platdata(&smdk2416_hsmmc1_pdata);
-
-	s3c24xx_hsudc_set_platdata(&smdk2416_hsudc_platdata);
-
-	gpio_request(S3C2410_GPB(4), "USBHost Power");
-	gpio_direction_output(S3C2410_GPB(4), 1);
-
-	gpio_request(S3C2410_GPB(3), "Display Power");
-	gpio_direction_output(S3C2410_GPB(3), 1);
-
-	gpio_request(S3C2410_GPB(1), "Display Reset");
-	gpio_direction_output(S3C2410_GPB(1), 1);
-
-	platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices));
-	smdk_machine_init();
-}
-
-MACHINE_START(SMDK2416, "SMDK2416")
-	/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2416,
-
-	.init_irq	= s3c2416_init_irq,
-	.map_io		= smdk2416_map_io,
-	.init_machine	= smdk2416_machine_init,
-	.init_time	= smdk2416_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk2440.c b/arch/arm/mach-s3c/mach-smdk2440.c
deleted file mode 100644
index 6aea769ebde1..000000000000
--- a/arch/arm/mach-s3c/mach-smdk2440.c
+++ /dev/null
@@ -1,180 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// linux/arch/arm/mach-s3c2440/mach-smdk2440.c
-//
-// Copyright (c) 2004-2005 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.fluff.org/ben/smdk2440/
-//
-// Thanks to Dimity Andric and TomTom for the loan of an SMDK2440.
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "devs.h"
-#include "cpu.h"
-
-#include "s3c24xx.h"
-#include "common-smdk-s3c24xx.h"
-
-static struct map_desc smdk2440_iodesc[] __initdata = {
-	/* ISA IO Space map (memory space selected by A24) */
-
-	{
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-	}
-};
-
-/* LCD driver info */
-
-static struct s3c2410fb_display smdk2440_lcd_cfg __initdata = {
-
-	.lcdcon5	= S3C2410_LCDCON5_FRM565 |
-			  S3C2410_LCDCON5_INVVLINE |
-			  S3C2410_LCDCON5_INVVFRAME |
-			  S3C2410_LCDCON5_PWREN |
-			  S3C2410_LCDCON5_HWSWP,
-
-	.type		= S3C2410_LCDCON1_TFT,
-
-	.width		= 240,
-	.height		= 320,
-
-	.pixclock	= 166667, /* HCLK 60 MHz, divisor 10 */
-	.xres		= 240,
-	.yres		= 320,
-	.bpp		= 16,
-	.left_margin	= 20,
-	.right_margin	= 8,
-	.hsync_len	= 4,
-	.upper_margin	= 8,
-	.lower_margin	= 7,
-	.vsync_len	= 4,
-};
-
-static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
-	.displays	= &smdk2440_lcd_cfg,
-	.num_displays	= 1,
-	.default_display = 0,
-
-#if 0
-	/* currently setup by downloader */
-	.gpccon		= 0xaa940659,
-	.gpccon_mask	= 0xffffffff,
-	.gpcup		= 0x0000ffff,
-	.gpcup_mask	= 0xffffffff,
-	.gpdcon		= 0xaa84aaa0,
-	.gpdcon_mask	= 0xffffffff,
-	.gpdup		= 0x0000faff,
-	.gpdup_mask	= 0xffffffff,
-
-	.gpccon_reg	= S3C2410_GPCCON,
-	.gpcup_reg	= S3C2410_GPCUP,
-	.gpdcon_reg	= S3C2410_GPDCON,
-	.gpdup_reg	= S3C2410_GPDUP,
-#endif
-
-	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
-};
-
-static struct platform_device *smdk2440_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-};
-
-static void __init smdk2440_map_io(void)
-{
-	s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
-	s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init smdk2440_init_time(void)
-{
-	s3c2440_init_clocks(16934400);
-	s3c24xx_timer_init();
-}
-
-static void __init smdk2440_machine_init(void)
-{
-	s3c24xx_fb_set_platdata(&smdk2440_fb_info);
-	s3c_i2c0_set_platdata(NULL);
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-	platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
-	smdk_machine_init();
-}
-
-MACHINE_START(S3C2440, "SMDK2440")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2440,
-
-	.init_irq	= s3c2440_init_irq,
-	.map_io		= smdk2440_map_io,
-	.init_machine	= smdk2440_machine_init,
-	.init_time	= smdk2440_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk2443.c b/arch/arm/mach-s3c/mach-smdk2443.c
deleted file mode 100644
index 075140f8f760..000000000000
--- a/arch/arm/mach-s3c/mach-smdk2443.c
+++ /dev/null
@@ -1,126 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2007 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.fluff.org/ben/smdk2443/
-//
-// Thanks to Samsung for the loan of an SMDK2443
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "regs-gpio.h"
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "devs.h"
-#include "cpu.h"
-
-#include "s3c24xx.h"
-#include "common-smdk-s3c24xx.h"
-
-static struct map_desc smdk2443_iodesc[] __initdata = {
-	/* ISA IO Space map (memory space selected by A24) */
-
-	{
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-	},
-	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	}
-};
-
-static struct platform_device *smdk2443_devices[] __initdata = {
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_hsmmc1,
-	&s3c2443_device_dma,
-};
-
-static void __init smdk2443_map_io(void)
-{
-	s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
-	s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init smdk2443_init_time(void)
-{
-	s3c2443_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init smdk2443_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
-	smdk_machine_init();
-}
-
-MACHINE_START(SMDK2443, "SMDK2443")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2443,
-	.init_irq	= s3c2443_init_irq,
-	.map_io		= smdk2443_map_io,
-	.init_machine	= smdk2443_machine_init,
-	.init_time	= smdk2443_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk6400.c b/arch/arm/mach-s3c/mach-smdk6400.c
deleted file mode 100644
index a3c1b2a82455..000000000000
--- a/arch/arm/mach-s3c/mach-smdk6400.c
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//	http://armlinux.simtec.co.uk/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "irqs.h"
-#include "map.h"
-
-#include "devs.h"
-#include "cpu.h"
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "gpio-samsung.h"
-
-#include "s3c64xx.h"
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-};
-
-static struct map_desc smdk6400_iodesc[] = {};
-
-static void __init smdk6400_map_io(void)
-{
-	s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
-	s3c64xx_set_xtal_freq(12000000);
-	s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
-	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
-}
-
-static struct platform_device *smdk6400_devices[] __initdata = {
-	&s3c_device_hsmmc1,
-	&s3c_device_i2c0,
-};
-
-static struct i2c_board_info i2c_devs[] __initdata = {
-	{ I2C_BOARD_INFO("wm8753", 0x1A), },
-	{ I2C_BOARD_INFO("24c08", 0x50), },
-};
-
-static void __init smdk6400_machine_init(void)
-{
-	i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
-	platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
-}
-
-MACHINE_START(SMDK6400, "SMDK6400")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6400_init_irq,
-	.map_io		= smdk6400_map_io,
-	.init_machine	= smdk6400_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk6410.c b/arch/arm/mach-s3c/mach-smdk6410.c
deleted file mode 100644
index e57b2bb61484..000000000000
--- a/arch/arm/mach-s3c/mach-smdk6410.c
+++ /dev/null
@@ -1,706 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//	http://armlinux.simtec.co.uk/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/smsc911x.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/platform_data/s3c-hsotg.h>
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
-#include <linux/mfd/wm8350/core.h>
-#include <linux/mfd/wm8350/pmic.h>
-#endif
-
-#ifdef CONFIG_SMDK6410_WM1192_EV1
-#include <linux/mfd/wm831x/core.h>
-#include <linux/mfd/wm831x/pdata.h>
-#endif
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "irqs.h"
-#include "map.h"
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include <linux/platform_data/ata-samsung_cf.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "fb.h"
-#include "gpio-cfg.h"
-
-#include "devs.h"
-#include "cpu.h"
-#include <linux/soc/samsung/s3c-adc.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include "keypad.h"
-
-#include "backlight-s3c64xx.h"
-#include "s3c64xx.h"
-#include "regs-modem-s3c64xx.h"
-#include "regs-srom-s3c64xx.h"
-#include "regs-sys-s3c64xx.h"
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-};
-
-/* framebuffer and LCD setup. */
-
-/* GPF15 = LCD backlight control
- * GPF13 => Panel power
- * GPN5 = LCD nRESET signal
- * PWM_TOUT1 => backlight brightness
- */
-
-static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power) {
-		gpio_direction_output(S3C64XX_GPF(13), 1);
-
-		/* fire nRESET on power up */
-		gpio_direction_output(S3C64XX_GPN(5), 0);
-		msleep(10);
-		gpio_direction_output(S3C64XX_GPN(5), 1);
-		msleep(1);
-	} else {
-		gpio_direction_output(S3C64XX_GPF(13), 0);
-	}
-}
-
-static struct plat_lcd_data smdk6410_lcd_power_data = {
-	.set_power	= smdk6410_lcd_power_set,
-};
-
-static struct platform_device smdk6410_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &smdk6410_lcd_power_data,
-};
-
-static struct s3c_fb_pd_win smdk6410_fb_win0 = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 800,
-	.yres		= 480,
-	.virtual_y	= 480 * 2,
-	.virtual_x	= 800,
-};
-
-static struct fb_videomode smdk6410_lcd_timing = {
-	.left_margin	= 8,
-	.right_margin	= 13,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-	.hsync_len	= 3,
-	.vsync_len	= 1,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.vtiming	= &smdk6410_lcd_timing,
-	.win[0]		= &smdk6410_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-/*
- * Configuring Ethernet on SMDK6410
- *
- * Both CS8900A and LAN9115 chips share one chip select mediated by CFG6.
- * The constant address below corresponds to nCS1
- *
- *  1) Set CFGB2 p3 ON others off, no other CFGB selects "ethernet"
- *  2) CFG6 needs to be switched to "LAN9115" side
- */
-
-static struct resource smdk6410_smsc911x_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, SZ_64K),
-	[1] = DEFINE_RES_NAMED(S3C_EINT(10), 1, NULL, IORESOURCE_IRQ \
-					| IRQ_TYPE_LEVEL_LOW),
-};
-
-static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
-	.irq_polarity  = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type      = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.flags         = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-
-static struct platform_device smdk6410_smsc911x = {
-	.name          = "smsc911x",
-	.id            = -1,
-	.num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
-	.resource      = &smdk6410_smsc911x_resources[0],
-	.dev = {
-		.platform_data = &smdk6410_smsc911x_pdata,
-	},
-};
-
-#ifdef CONFIG_REGULATOR
-static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
-	REGULATOR_SUPPLY("PVDD", "0-001b"),
-	REGULATOR_SUPPLY("AVDD", "0-001b"),
-};
-
-static struct regulator_init_data __maybe_unused smdk6410_b_pwr_5v_data = {
-	.constraints = {
-		.always_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
-	.consumer_supplies = smdk6410_b_pwr_5v_consumers,
-};
-
-static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
-	.supply_name = "B_PWR_5V",
-	.microvolts = 5000000,
-	.init_data = &smdk6410_b_pwr_5v_data,
-};
-
-static struct platform_device smdk6410_b_pwr_5v = {
-	.name          = "reg-fixed-voltage",
-	.id            = -1,
-	.dev = {
-		.platform_data = &smdk6410_b_pwr_5v_pdata,
-	},
-};
-#endif
-
-static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = {
-	.setup_gpio	= s3c64xx_ide_setup_gpio,
-};
-
-static uint32_t smdk6410_keymap[] __initdata = {
-	/* KEY(row, col, keycode) */
-	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
-	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
-	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
-	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
-};
-
-static struct matrix_keymap_data smdk6410_keymap_data __initdata = {
-	.keymap		= smdk6410_keymap,
-	.keymap_size	= ARRAY_SIZE(smdk6410_keymap),
-};
-
-static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
-	.keymap_data	= &smdk6410_keymap_data,
-	.rows		= 2,
-	.cols		= 8,
-};
-
-static struct map_desc smdk6410_iodesc[] = {};
-
-static struct platform_device *smdk6410_devices[] __initdata = {
-#ifdef CONFIG_SMDK6410_SD_CH0
-	&s3c_device_hsmmc0,
-#endif
-#ifdef CONFIG_SMDK6410_SD_CH1
-	&s3c_device_hsmmc1,
-#endif
-	&s3c_device_i2c0,
-	&s3c_device_i2c1,
-	&s3c_device_fb,
-	&s3c_device_ohci,
-	&samsung_device_pwm,
-	&s3c_device_usb_hsotg,
-	&s3c64xx_device_iisv4,
-	&samsung_device_keypad,
-
-#ifdef CONFIG_REGULATOR
-	&smdk6410_b_pwr_5v,
-#endif
-	&smdk6410_lcd_powerdev,
-
-	&smdk6410_smsc911x,
-	&s3c_device_adc,
-	&s3c_device_cfcon,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-};
-
-#ifdef CONFIG_REGULATOR
-/* ARM core */
-static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = {
-	REGULATOR_SUPPLY("vddarm", NULL),
-};
-
-/* VDDARM, BUCK1 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddarm = {
-	.constraints = {
-		.name = "PVDD_ARM",
-		.min_uV = 1000000,
-		.max_uV = 1300000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(smdk6410_vddarm_consumers),
-	.consumer_supplies = smdk6410_vddarm_consumers,
-};
-
-/* VDD_INT, BUCK2 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddint = {
-	.constraints = {
-		.name = "PVDD_INT",
-		.min_uV = 1000000,
-		.max_uV = 1200000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-};
-
-/* VDD_HI, LDO3 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddhi = {
-	.constraints = {
-		.name = "PVDD_HI",
-		.always_on = 1,
-	},
-};
-
-/* VDD_PLL, LDO2 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddpll = {
-	.constraints = {
-		.name = "PVDD_PLL",
-		.always_on = 1,
-	},
-};
-
-/* VDD_UH_MMC, LDO5 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vdduh_mmc = {
-	.constraints = {
-		.name = "PVDD_UH+PVDD_MMC",
-		.always_on = 1,
-	},
-};
-
-/* VCCM3BT, LDO8 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vccmc3bt = {
-	.constraints = {
-		.name = "PVCCM3BT",
-		.always_on = 1,
-	},
-};
-
-/* VCCM2MTV, LDO11 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vccm2mtv = {
-	.constraints = {
-		.name = "PVCCM2MTV",
-		.always_on = 1,
-	},
-};
-
-/* VDD_LCD, LDO12 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddlcd = {
-	.constraints = {
-		.name = "PVDD_LCD",
-		.always_on = 1,
-	},
-};
-
-/* VDD_OTGI, LDO9 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddotgi = {
-	.constraints = {
-		.name = "PVDD_OTGI",
-		.always_on = 1,
-	},
-};
-
-/* VDD_OTG, LDO14 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddotg = {
-	.constraints = {
-		.name = "PVDD_OTG",
-		.always_on = 1,
-	},
-};
-
-/* VDD_ALIVE, LDO15 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddalive = {
-	.constraints = {
-		.name = "PVDD_ALIVE",
-		.always_on = 1,
-	},
-};
-
-/* VDD_AUDIO, VLDO_AUDIO on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddaudio = {
-	.constraints = {
-		.name = "PVDD_AUDIO",
-		.always_on = 1,
-	},
-};
-#endif
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
-/* S3C64xx internal logic & PLL */
-static struct regulator_init_data __maybe_unused wm8350_dcdc1_data = {
-	.constraints = {
-		.name = "PVDD_INT+PVDD_PLL",
-		.min_uV = 1200000,
-		.max_uV = 1200000,
-		.always_on = 1,
-		.apply_uV = 1,
-	},
-};
-
-/* Memory */
-static struct regulator_init_data __maybe_unused wm8350_dcdc3_data = {
-	.constraints = {
-		.name = "PVDD_MEM",
-		.min_uV = 1800000,
-		.max_uV = 1800000,
-		.always_on = 1,
-		.state_mem = {
-			 .uV = 1800000,
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 1,
-		},
-		.initial_state = PM_SUSPEND_MEM,
-	},
-};
-
-/* USB, EXT, PCM, ADC/DAC, USB, MMC */
-static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
-	REGULATOR_SUPPLY("DVDD", "0-001b"),
-};
-
-static struct regulator_init_data __maybe_unused wm8350_dcdc4_data = {
-	.constraints = {
-		.name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV",
-		.min_uV = 3000000,
-		.max_uV = 3000000,
-		.always_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
-	.consumer_supplies = wm8350_dcdc4_consumers,
-};
-
-/* OTGi/1190-EV1 HPVDD & AVDD */
-static struct regulator_init_data __maybe_unused wm8350_ldo4_data = {
-	.constraints = {
-		.name = "PVDD_OTGI+HPVDD+AVDD",
-		.min_uV = 1200000,
-		.max_uV = 1200000,
-		.apply_uV = 1,
-		.always_on = 1,
-	},
-};
-
-static struct {
-	int regulator;
-	struct regulator_init_data *initdata;
-} wm1190_regulators[] = {
-	{ WM8350_DCDC_1, &wm8350_dcdc1_data },
-	{ WM8350_DCDC_3, &wm8350_dcdc3_data },
-	{ WM8350_DCDC_4, &wm8350_dcdc4_data },
-	{ WM8350_DCDC_6, &smdk6410_vddarm },
-	{ WM8350_LDO_1, &smdk6410_vddalive },
-	{ WM8350_LDO_2, &smdk6410_vddotg },
-	{ WM8350_LDO_3, &smdk6410_vddlcd },
-	{ WM8350_LDO_4, &wm8350_ldo4_data },
-};
-
-static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
-{
-	int i;
-
-	/* Configure the IRQ line */
-	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
-
-	/* Instantiate the regulators */
-	for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
-		wm8350_register_regulator(wm8350,
-					  wm1190_regulators[i].regulator,
-					  wm1190_regulators[i].initdata);
-
-	return 0;
-}
-
-static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
-	.init = smdk6410_wm8350_init,
-	.irq_high = 1,
-	.irq_base = IRQ_BOARD_START,
-};
-#endif
-
-#ifdef CONFIG_SMDK6410_WM1192_EV1
-static struct gpio_led wm1192_pmic_leds[] = {
-	{
-		.name = "PMIC:red:power",
-		.gpio = GPIO_BOARD_START + 3,
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-};
-
-static struct gpio_led_platform_data wm1192_pmic_led = {
-	.num_leds = ARRAY_SIZE(wm1192_pmic_leds),
-	.leds = wm1192_pmic_leds,
-};
-
-static struct platform_device wm1192_pmic_led_dev = {
-	.name          = "leds-gpio",
-	.id            = -1,
-	.dev = {
-		.platform_data = &wm1192_pmic_led,
-	},
-};
-
-static int wm1192_pre_init(struct wm831x *wm831x)
-{
-	int ret;
-
-	/* Configure the IRQ line */
-	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
-
-	ret = platform_device_register(&wm1192_pmic_led_dev);
-	if (ret != 0)
-		dev_err(wm831x->dev, "Failed to add PMIC LED: %d\n", ret);
-
-	return 0;
-}
-
-static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
-	.isink = 1,
-	.max_uA = 27554,
-};
-
-static struct regulator_init_data __maybe_unused wm1192_dcdc3 = {
-	.constraints = {
-		.name = "PVDD_MEM+PVDD_GPS",
-		.always_on = 1,
-	},
-};
-
-static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
-	REGULATOR_SUPPLY("DVDD", "0-001b"),   /* WM8580 */
-};
-
-static struct regulator_init_data __maybe_unused wm1192_ldo1 = {
-	.constraints = {
-		.name = "PVDD_LCD+PVDD_EXT",
-		.always_on = 1,
-	},
-	.consumer_supplies = wm1192_ldo1_consumers,
-	.num_consumer_supplies = ARRAY_SIZE(wm1192_ldo1_consumers),
-};
-
-static struct wm831x_status_pdata wm1192_led7_pdata = {
-	.name = "LED7:green:",
-};
-
-static struct wm831x_status_pdata wm1192_led8_pdata = {
-	.name = "LED8:green:",
-};
-
-static struct wm831x_pdata smdk6410_wm1192_pdata = {
-	.pre_init = wm1192_pre_init,
-
-	.backlight = &wm1192_backlight_pdata,
-	.dcdc = {
-		&smdk6410_vddarm,  /* DCDC1 */
-		&smdk6410_vddint,  /* DCDC2 */
-		&wm1192_dcdc3,
-	},
-	.gpio_base = GPIO_BOARD_START,
-	.ldo = {
-		 &wm1192_ldo1,        /* LDO1 */
-		 &smdk6410_vdduh_mmc, /* LDO2 */
-		 NULL,                /* LDO3 NC */
-		 &smdk6410_vddotgi,   /* LDO4 */
-		 &smdk6410_vddotg,    /* LDO5 */
-		 &smdk6410_vddhi,     /* LDO6 */
-		 &smdk6410_vddaudio,  /* LDO7 */
-		 &smdk6410_vccm2mtv,  /* LDO8 */
-		 &smdk6410_vddpll,    /* LDO9 */
-		 &smdk6410_vccmc3bt,  /* LDO10 */
-		 &smdk6410_vddalive,  /* LDO11 */
-	},
-	.status = {
-		&wm1192_led7_pdata,
-		&wm1192_led8_pdata,
-	},
-};
-#endif
-
-static struct i2c_board_info i2c_devs0[] __initdata = {
-	{ I2C_BOARD_INFO("24c08", 0x50), },
-	{ I2C_BOARD_INFO("wm8580", 0x1b), },
-
-#ifdef CONFIG_SMDK6410_WM1192_EV1
-	{ I2C_BOARD_INFO("wm8312", 0x34),
-	  .platform_data = &smdk6410_wm1192_pdata,
-	  .irq = S3C_EINT(12),
-	},
-#endif
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
-	{ I2C_BOARD_INFO("wm8350", 0x1a),
-	  .platform_data = &smdk6410_wm8350_pdata,
-	  .irq = S3C_EINT(12),
-	},
-#endif
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
-	{ I2C_BOARD_INFO("24c128", 0x57), },	/* Samsung S524AD0XD1 */
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = {
-	.no = S3C64XX_GPF(15),
-	.func = S3C_GPIO_SFN(2),
-};
-
-static struct pwm_lookup smdk6410_pwm_lookup[] = {
-	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL, 78770,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data smdk6410_bl_data = {
-	/* Intentionally blank */
-};
-
-static struct dwc2_hsotg_plat smdk6410_hsotg_pdata;
-
-static void __init smdk6410_map_io(void)
-{
-	u32 tmp;
-
-	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
-	s3c64xx_set_xtal_freq(12000000);
-	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
-	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
-
-	/* set the LCD type */
-
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the lcd bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-static void __init smdk6410_machine_init(void)
-{
-	u32 cs1;
-
-	s3c_i2c0_set_platdata(NULL);
-	s3c_i2c1_set_platdata(NULL);
-	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
-	dwc2_hsotg_set_platdata(&smdk6410_hsotg_pdata);
-
-	samsung_keypad_set_platdata(&smdk6410_keypad_data);
-
-	s3c64xx_ts_set_platdata(NULL);
-
-	/* configure nCS1 width to 16 bits */
-
-	cs1 = __raw_readl(S3C64XX_SROM_BW) &
-		    ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
-						   S3C64XX_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S3C64XX_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-
-	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
-		     (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
-		     (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
-		     (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
-		     (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
-		     (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
-		     (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
-
-	gpio_request(S3C64XX_GPN(5), "LCD power");
-	gpio_request(S3C64XX_GPF(13), "LCD power");
-
-	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
-	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
-	s3c_ide_set_platdata(&smdk6410_ide_pdata);
-
-	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
-
-	pwm_add_table(smdk6410_pwm_lookup, ARRAY_SIZE(smdk6410_pwm_lookup));
-	samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
-}
-
-MACHINE_START(SMDK6410, "SMDK6410")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= smdk6410_map_io,
-	.init_machine	= smdk6410_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-tct_hammer.c b/arch/arm/mach-s3c/mach-tct_hammer.c
deleted file mode 100644
index 93ab1abd8bd3..000000000000
--- a/arch/arm/mach-s3c/mach-tct_hammer.c
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2007 TinCanTools
-//	David Anders <danders@amltd.com>
-//
-// @History:
-// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
-// Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/gpio/machine.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "devs.h"
-#include "cpu.h"
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/physmap.h>
-
-#include "s3c24xx.h"
-
-static struct resource tct_hammer_nor_resource =
-			DEFINE_RES_MEM(0x00000000, SZ_16M);
-
-static struct mtd_partition tct_hammer_mtd_partitions[] = {
-	{
-		.name		= "System",
-		.size		= 0x240000,
-		.offset		= 0,
-		.mask_flags 	= MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name		= "JFFS2",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data tct_hammer_flash_data = {
-	.width		= 2,
-	.parts		= tct_hammer_mtd_partitions,
-	.nr_parts	= ARRAY_SIZE(tct_hammer_mtd_partitions),
-};
-
-static struct platform_device tct_hammer_device_nor = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-			.platform_data = &tct_hammer_flash_data,
-		},
-	.num_resources	= 1,
-	.resource	= &tct_hammer_nor_resource,
-};
-
-static struct map_desc tct_hammer_iodesc[] __initdata = {
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-static struct gpiod_lookup_table tct_hammer_mmc_gpio_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device *tct_hammer_devices[] __initdata = {
-	&s3c_device_adc,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_ohci,
-	&s3c_device_rtc,
-	&s3c_device_usbgadget,
-	&s3c_device_sdi,
-	&tct_hammer_device_nor,
-};
-
-static void __init tct_hammer_map_io(void)
-{
-	s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
-	s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init tct_hammer_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init tct_hammer_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	gpiod_add_lookup_table(&tct_hammer_mmc_gpio_table);
-	platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
-}
-
-MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.map_io		= tct_hammer_map_io,
-	.init_irq	= s3c2410_init_irq,
-	.init_machine	= tct_hammer_init,
-	.init_time	= tct_hammer_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-vr1000.c b/arch/arm/mach-s3c/mach-vr1000.c
deleted file mode 100644
index c85033e6ef8f..000000000000
--- a/arch/arm/mach-s3c/mach-vr1000.c
+++ /dev/null
@@ -1,364 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2003-2008 Simtec Electronics
-//   Ben Dooks <ben@simtec.co.uk>
-//
-// Machine support for Thorcom VR1000 board. Designed for Thorcom by
-// Simtec Electronics, http://www.simtec.co.uk/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/dm9000.h>
-#include <linux/i2c.h>
-
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/leds-s3c24xx.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-
-#include "cpu.h"
-#include "devs.h"
-
-#include "bast.h"
-#include "s3c24xx.h"
-#include "simtec.h"
-#include "vr1000.h"
-
-/* macros for virtual address mods for the io space entries */
-#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
-#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
-#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
-#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)
-
-/* macros to modify the physical addresses for io space */
-
-#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
-#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
-#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
-#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
-
-static struct map_desc vr1000_iodesc[] __initdata = {
-  /* ISA IO areas */
-  {
-	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-	  .pfn		= PA_CS2(BAST_PA_ISAIO),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
-  },
-
-  /*  CPLD control registers, and external interrupt controls */
-  {
-	  .virtual	= (u32)VR1000_VA_CTRL1,
-	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL1),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)VR1000_VA_CTRL2,
-	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL2),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)VR1000_VA_CTRL3,
-	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL3),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)VR1000_VA_CTRL4,
-	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL4),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	/* port 2 is not actually used */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* definitions for the vr1000 extra 16550 serial ports */
-
-#define VR1000_BAUDBASE (3692307)
-
-#define VR1000_SERIAL_MAPBASE(x) (VR1000_PA_SERIAL + 0x80 + ((x) << 5))
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	[0] = {
-		.mapbase	= VR1000_SERIAL_MAPBASE(0),
-		.irq		= VR1000_IRQ_SERIAL + 0,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= VR1000_BAUDBASE,
-	},
-	[1] = {
-		.mapbase	= VR1000_SERIAL_MAPBASE(1),
-		.irq		= VR1000_IRQ_SERIAL + 1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= VR1000_BAUDBASE,
-	},
-	[2] = {
-		.mapbase	= VR1000_SERIAL_MAPBASE(2),
-		.irq		= VR1000_IRQ_SERIAL + 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= VR1000_BAUDBASE,
-	},
-	[3] = {
-		.mapbase	= VR1000_SERIAL_MAPBASE(3),
-		.irq		= VR1000_IRQ_SERIAL + 3,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= VR1000_BAUDBASE,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-/* DM9000 ethernet devices */
-
-static struct resource vr1000_dm9k0_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000, 4),
-	[1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, 0x40),
-	[2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000A, 1, NULL, IORESOURCE_IRQ \
-						| IORESOURCE_IRQ_HIGHLEVEL),
-};
-
-static struct resource vr1000_dm9k1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, 4),
-	[1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, 0x40),
-	[2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000N, 1, NULL, IORESOURCE_IRQ \
-						| IORESOURCE_IRQ_HIGHLEVEL),
-};
-
-/* for the moment we limit ourselves to 16bit IO until some
- * better IO routines can be written and tested
-*/
-
-static struct dm9000_plat_data vr1000_dm9k_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY,
-};
-
-static struct platform_device vr1000_dm9k0 = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(vr1000_dm9k0_resource),
-	.resource	= vr1000_dm9k0_resource,
-	.dev		= {
-		.platform_data = &vr1000_dm9k_platdata,
-	}
-};
-
-static struct platform_device vr1000_dm9k1 = {
-	.name		= "dm9000",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(vr1000_dm9k1_resource),
-	.resource	= vr1000_dm9k1_resource,
-	.dev		= {
-		.platform_data = &vr1000_dm9k_platdata,
-	}
-};
-
-/* LEDS */
-
-static struct gpiod_lookup_table vr1000_led1_gpio_table = {
-	.dev_id = "s3c24xx_led.1",
-	.table = {
-		GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table vr1000_led2_gpio_table = {
-	.dev_id = "s3c24xx_led.2",
-	.table = {
-		GPIO_LOOKUP("GPB", 1, NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table vr1000_led3_gpio_table = {
-	.dev_id = "s3c24xx_led.3",
-	.table = {
-		GPIO_LOOKUP("GPB", 2, NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct s3c24xx_led_platdata vr1000_led1_pdata = {
-	.name		= "led1",
-	.def_trigger	= "",
-};
-
-static struct s3c24xx_led_platdata vr1000_led2_pdata = {
-	.name		= "led2",
-	.def_trigger	= "",
-};
-
-static struct s3c24xx_led_platdata vr1000_led3_pdata = {
-	.name		= "led3",
-	.def_trigger	= "",
-};
-
-static struct platform_device vr1000_led1 = {
-	.name		= "s3c24xx_led",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &vr1000_led1_pdata,
-	},
-};
-
-static struct platform_device vr1000_led2 = {
-	.name		= "s3c24xx_led",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &vr1000_led2_pdata,
-	},
-};
-
-static struct platform_device vr1000_led3 = {
-	.name		= "s3c24xx_led",
-	.id		= 3,
-	.dev		= {
-		.platform_data	= &vr1000_led3_pdata,
-	},
-};
-
-/* I2C devices. */
-
-static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	}, {
-		I2C_BOARD_INFO("tmp101", 0x48),
-	}, {
-		I2C_BOARD_INFO("m41st87", 0x68),
-	},
-};
-
-/* devices for this board */
-
-static struct platform_device *vr1000_devices[] __initdata = {
-	&s3c2410_device_dclk,
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_adc,
-	&serial_device,
-	&vr1000_dm9k0,
-	&vr1000_dm9k1,
-	&vr1000_led1,
-	&vr1000_led2,
-	&vr1000_led3,
-};
-
-static void vr1000_power_off(void)
-{
-	gpio_direction_output(S3C2410_GPB(9), 1);
-}
-
-static void __init vr1000_map_io(void)
-{
-	pm_power_off = vr1000_power_off;
-
-	s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
-	s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init vr1000_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init vr1000_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-
-	/* Disable pull-up on LED lines and register GPIO lookups */
-	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
-	s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_NONE);
-	s3c_gpio_setpull(S3C2410_GPB(2), S3C_GPIO_PULL_NONE);
-	gpiod_add_lookup_table(&vr1000_led1_gpio_table);
-	gpiod_add_lookup_table(&vr1000_led2_gpio_table);
-	gpiod_add_lookup_table(&vr1000_led3_gpio_table);
-
-	platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
-
-	i2c_register_board_info(0, vr1000_i2c_devs,
-				ARRAY_SIZE(vr1000_i2c_devs));
-
-	nor_simtec_init();
-	simtec_audio_add(NULL, true, NULL);
-
-	WARN_ON(gpio_request(S3C2410_GPB(9), "power off"));
-}
-
-MACHINE_START(VR1000, "Thorcom-VR1000")
-	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.map_io		= vr1000_map_io,
-	.init_machine	= vr1000_init,
-	.init_irq	= s3c2410_init_irq,
-	.init_time	= vr1000_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-vstms.c b/arch/arm/mach-s3c/mach-vstms.c
deleted file mode 100644
index 6f878418be3e..000000000000
--- a/arch/arm/mach-s3c/mach-vstms.c
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// (C) 2006 Thomas Gleixner <tglx@linutronix.de>
-//
-// Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-#include <linux/memblock.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-
-#include <linux/platform_data/fb-s3c2410.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-
-#include "devs.h"
-#include "cpu.h"
-
-#include "s3c24xx.h"
-
-static struct map_desc vstms_iodesc[] __initdata = {
-};
-
-static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	}
-};
-
-static struct mtd_partition __initdata vstms_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= 0x7C000,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "UBoot Config",
-		.offset = 0x7C000,
-		.size	= 0x4000,
-	},
-	[2] = {
-		.name	= "Kernel",
-		.offset = 0x80000,
-		.size	= 0x200000,
-	},
-	[3] = {
-		.name	= "RFS",
-		.offset	= 0x280000,
-		.size	= 0x3d80000,
-	},
-};
-
-static struct s3c2410_nand_set __initdata vstms_nand_sets[] = {
-	[0] = {
-		.name		= "NAND",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(vstms_nand_part),
-		.partitions	= vstms_nand_part,
-	},
-};
-
-/* choose a set of timings which should suit most 512Mbit
- * chips and beyond.
-*/
-
-static struct s3c2410_platform_nand __initdata vstms_nand_info = {
-	.tacls		= 20,
-	.twrph0		= 60,
-	.twrph1		= 20,
-	.nr_sets	= ARRAY_SIZE(vstms_nand_sets),
-	.sets		= vstms_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-static struct platform_device *vstms_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_rtc,
-	&s3c_device_nand,
-	&s3c2412_device_dma,
-};
-
-static void __init vstms_fixup(struct tag *tags, char **cmdline)
-{
-	if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
-		memblock_add(0x30000000, SZ_64M);
-	}
-}
-
-static void __init vstms_map_io(void)
-{
-	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
-	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init vstms_init_time(void)
-{
-	s3c2412_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init vstms_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	s3c_nand_set_platdata(&vstms_nand_info);
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-	platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
-}
-
-MACHINE_START(VSTMS, "VSTMS")
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2412,
-
-	.fixup		= vstms_fixup,
-	.init_irq	= s3c2412_init_irq,
-	.init_machine	= vstms_init,
-	.map_io		= vstms_map_io,
-	.init_time	= vstms_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/map-s3c.h b/arch/arm/mach-s3c/map-s3c.h
index a18fdd3d6ae2..b5f5bdba384f 100644
--- a/arch/arm/mach-s3c/map-s3c.h
+++ b/arch/arm/mach-s3c/map-s3c.h
@@ -11,20 +11,6 @@
 
 #include "map.h"
 
-#define S3C24XX_VA_IRQ		S3C_VA_IRQ
-#define S3C24XX_VA_MEMCTRL	S3C_VA_MEM
-#define S3C24XX_VA_UART		S3C_VA_UART
-
-#define S3C24XX_VA_TIMER	S3C_VA_TIMER
-#define S3C24XX_VA_CLKPWR	S3C_VA_SYS
-#define S3C24XX_VA_WATCHDOG	S3C_VA_WATCHDOG
-
-#define S3C2412_VA_SSMC		S3C_ADDR_CPU(0x00000000)
-#define S3C2412_VA_EBI		S3C_ADDR_CPU(0x00100000)
-
-#define S3C2410_PA_UART		(0x50000000)
-#define S3C24XX_PA_UART		S3C2410_PA_UART
-
 /*
  * GPIO ports
  *
@@ -35,11 +21,6 @@
  * 0xFA800000, which is not in the way of any current mapping
  * by the base system.
 */
-
-#define S3C2410_PA_GPIO		(0x56000000)
-#define S3C24XX_PA_GPIO		S3C2410_PA_GPIO
-
-#define S3C24XX_VA_GPIO		((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
 #define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
 
 #define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
@@ -47,24 +28,6 @@
 
 #define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
 
-#define S3C2410_ADDR(x)		S3C_ADDR(x)
-
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2	(S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
-
 #include "map-s5p.h"
 
 #endif /* __ASM_PLAT_MAP_S3C_H */
diff --git a/arch/arm/mach-s3c/map-s3c24xx.h b/arch/arm/mach-s3c/map-s3c24xx.h
deleted file mode 100644
index f8d075b11d6f..000000000000
--- a/arch/arm/mach-s3c/map-s3c24xx.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - Memory map definitions
- */
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H
-
-#include "map-base.h"
-#include "map-s3c.h"
-
-/*
- * interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C2410_PA_IRQ		(0x4A000000)
-#define S3C24XX_SZ_IRQ		SZ_1M
-
-/* memory controller registers */
-#define S3C2410_PA_MEMCTRL	(0x48000000)
-#define S3C24XX_SZ_MEMCTRL	SZ_1M
-
-/* Timers */
-#define S3C2410_PA_TIMER	(0x51000000)
-#define S3C24XX_SZ_TIMER	SZ_1M
-
-/* Clock and Power management */
-#define S3C24XX_SZ_CLKPWR	SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV	(0x52000000)
-#define S3C24XX_SZ_USBDEV	SZ_1M
-
-/* Watchdog */
-#define S3C2410_PA_WATCHDOG	(0x53000000)
-#define S3C24XX_SZ_WATCHDOG	SZ_1M
-
-/* Standard size definitions for peripheral blocks. */
-
-#define S3C24XX_SZ_UART		SZ_1M
-#define S3C24XX_SZ_IIS		SZ_1M
-#define S3C24XX_SZ_ADC		SZ_1M
-#define S3C24XX_SZ_SPI		SZ_1M
-#define S3C24XX_SZ_SDI		SZ_1M
-#define S3C24XX_SZ_NAND		SZ_1M
-#define S3C24XX_SZ_GPIO		SZ_1M
-
-/* USB host controller */
-#define S3C2410_PA_USBHOST (0x49000000)
-
-/* S3C2416/S3C2443/S3C2450 High-Speed USB Gadget */
-#define S3C2416_PA_HSUDC	(0x49800000)
-#define S3C2416_SZ_HSUDC	(SZ_4K)
-
-/* DMA controller */
-#define S3C2410_PA_DMA	   (0x4B000000)
-#define S3C24XX_SZ_DMA	   SZ_1M
-
-/* Clock and Power management */
-#define S3C2410_PA_CLKPWR  (0x4C000000)
-
-/* LCD controller */
-#define S3C2410_PA_LCD	   (0x4D000000)
-#define S3C24XX_SZ_LCD	   SZ_1M
-
-/* NAND flash controller */
-#define S3C2410_PA_NAND	   (0x4E000000)
-
-/* IIC hardware controller */
-#define S3C2410_PA_IIC	   (0x54000000)
-
-/* IIS controller */
-#define S3C2410_PA_IIS	   (0x55000000)
-
-/* RTC */
-#define S3C2410_PA_RTC	   (0x57000000)
-#define S3C24XX_SZ_RTC	   SZ_1M
-
-/* ADC */
-#define S3C2410_PA_ADC	   (0x58000000)
-
-/* SPI */
-#define S3C2410_PA_SPI	   (0x59000000)
-#define S3C2443_PA_SPI0		(0x52000000)
-#define S3C2443_PA_SPI1		S3C2410_PA_SPI
-#define S3C2410_SPI1		(0x20)
-#define S3C2412_SPI1		(0x100)
-
-/* SDI */
-#define S3C2410_PA_SDI	   (0x5A000000)
-
-/* CAMIF */
-#define S3C2440_PA_CAMIF   (0x4F000000)
-#define S3C2440_SZ_CAMIF   SZ_1M
-
-/* AC97 */
-
-#define S3C2440_PA_AC97	   (0x5B000000)
-#define S3C2440_SZ_AC97	   SZ_1M
-
-/* S3C2443/S3C2416 High-speed SD/MMC */
-#define S3C2443_PA_HSMMC   (0x4A800000)
-#define S3C2416_PA_HSMMC0  (0x4AC00000)
-
-#define	S3C2443_PA_FB	(0x4C800000)
-
-/* S3C2412 memory and IO controls */
-#define S3C2412_PA_SSMC	(0x4F000000)
-
-#define S3C2412_PA_EBI	(0x48800000)
-
-/* physical addresses of all the chip-select areas */
-
-#define S3C2410_CS0 (0x00000000)
-#define S3C2410_CS1 (0x08000000)
-#define S3C2410_CS2 (0x10000000)
-#define S3C2410_CS3 (0x18000000)
-#define S3C2410_CS4 (0x20000000)
-#define S3C2410_CS5 (0x28000000)
-#define S3C2410_CS6 (0x30000000)
-#define S3C2410_CS7 (0x38000000)
-
-#define S3C2410_SDRAM_PA    (S3C2410_CS6)
-
-/* Use a single interface for common resources between S3C24XX cpus */
-
-#define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
-#define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
-#define S3C24XX_PA_DMA      S3C2410_PA_DMA
-#define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
-#define S3C24XX_PA_LCD      S3C2410_PA_LCD
-#define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
-#define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
-#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
-#define S3C24XX_PA_IIS      S3C2410_PA_IIS
-#define S3C24XX_PA_RTC      S3C2410_PA_RTC
-#define S3C24XX_PA_ADC      S3C2410_PA_ADC
-#define S3C24XX_PA_SPI      S3C2410_PA_SPI
-#define S3C24XX_PA_SPI1		(S3C2410_PA_SPI + S3C2410_SPI1)
-#define S3C24XX_PA_SDI      S3C2410_PA_SDI
-#define S3C24XX_PA_NAND	    S3C2410_PA_NAND
-
-#define S3C_PA_FB	    S3C2443_PA_FB
-#define S3C_PA_IIC          S3C2410_PA_IIC
-#define S3C_PA_USBHOST	S3C2410_PA_USBHOST
-#define S3C_PA_HSMMC0	    S3C2416_PA_HSMMC0
-#define S3C_PA_HSMMC1	    S3C2443_PA_HSMMC
-#define S3C_PA_WDT	    S3C2410_PA_WATCHDOG
-#define S3C_PA_NAND	    S3C24XX_PA_NAND
-
-#define S3C_PA_SPI0		S3C2443_PA_SPI0
-#define S3C_PA_SPI1		S3C2443_PA_SPI1
-
-#define SAMSUNG_PA_TIMER	S3C2410_PA_TIMER
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c/map.h b/arch/arm/mach-s3c/map.h
index 7cfb517d4886..778d6f81cb2b 100644
--- a/arch/arm/mach-s3c/map.h
+++ b/arch/arm/mach-s3c/map.h
@@ -1,9 +1,2 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "map-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
 #include "map-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/nand-core-s3c24xx.h b/arch/arm/mach-s3c/nand-core-s3c24xx.h
deleted file mode 100644
index a14316729c48..000000000000
--- a/arch/arm/mach-s3c/nand-core-s3c24xx.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S3C -  Nand Controller core functions
- */
-
-#ifndef __ASM_ARCH_NAND_CORE_S3C24XX_H
-#define __ASM_ARCH_NAND_CORE_S3C24XX_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_nand_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_NAND
-	s3c_device_nand.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_NAND_CORE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c/onenand-core-s3c64xx.h b/arch/arm/mach-s3c/onenand-core-s3c64xx.h
deleted file mode 100644
index e2dfdd1fec93..000000000000
--- a/arch/arm/mach-s3c/onenand-core-s3c64xx.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- *  Copyright (c) 2010 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *  Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * Samsung OneNAD Controller core functions
- */
-
-#ifndef __ASM_ARCH_ONENAND_CORE_S3C64XX_H
-#define __ASM_ARCH_ONENAND_CORE_S3C64XX_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_onenand_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_ONENAND
-	s3c_device_onenand.name = name;
-#endif
-}
-
-static inline void s3c64xx_onenand1_setname(char *name)
-{
-#ifdef CONFIG_S3C64XX_DEV_ONENAND1
-	s3c64xx_device_onenand1.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_ONENAND_CORE_S3C64XX_H */
diff --git a/arch/arm/mach-s3c/osiris.h b/arch/arm/mach-s3c/osiris.h
deleted file mode 100644
index b6c9c5ed2ba7..000000000000
--- a/arch/arm/mach-s3c/osiris.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * OSIRIS - CPLD control constants
- * OSIRIS - Memory map definitions
- */
-
-#ifndef __MACH_S3C24XX_OSIRIS_H
-#define __MACH_S3C24XX_OSIRIS_H __FILE__
-
-/* CTRL0 - NAND WP control */
-
-#define OSIRIS_CTRL0_NANDSEL		(0x3)
-#define OSIRIS_CTRL0_BOOT_INT		(1<<3)
-#define OSIRIS_CTRL0_PCMCIA		(1<<4)
-#define OSIRIS_CTRL0_FIX8		(1<<5)
-#define OSIRIS_CTRL0_PCMCIA_nWAIT	(1<<6)
-#define OSIRIS_CTRL0_PCMCIA_nIOIS16	(1<<7)
-
-#define OSIRIS_CTRL1_FIX8		(1<<0)
-
-#define OSIRIS_ID_REVMASK		(0x7)
-
-/* start peripherals off after the S3C2410 */
-
-#define OSIRIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x04000000))
-
-#define OSIRIS_PA_CPLD		(S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define OSIRIS_VA_CTRL0		OSIRIS_IOADDR(0x00000000)
-#define OSIRIS_PA_CTRL0		(OSIRIS_PA_CPLD)
-
-#define OSIRIS_VA_CTRL1		OSIRIS_IOADDR(0x00100000)
-#define OSIRIS_PA_CTRL1		(OSIRIS_PA_CPLD + (1<<23))
-
-#define OSIRIS_VA_CTRL2		OSIRIS_IOADDR(0x00200000)
-#define OSIRIS_PA_CTRL2		(OSIRIS_PA_CPLD + (2<<23))
-
-#define OSIRIS_VA_CTRL3		OSIRIS_IOADDR(0x00300000)
-#define OSIRIS_PA_CTRL3		(OSIRIS_PA_CPLD + (2<<23))
-
-#define OSIRIS_VA_IDREG		OSIRIS_IOADDR(0x00700000)
-#define OSIRIS_PA_IDREG		(OSIRIS_PA_CPLD + (7<<23))
-
-#endif /* __MACH_S3C24XX_OSIRIS_H */
diff --git a/arch/arm/mach-s3c/otom.h b/arch/arm/mach-s3c/otom.h
deleted file mode 100644
index c800f67d03d4..000000000000
--- a/arch/arm/mach-s3c/otom.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * (c) 2005 Guillaume GOURAT / NexVision
- *          guillaume.gourat@nexvision.fr
- *
- * NexVision OTOM board memory map definitions
- */
-
-/*
- * ok, we've used up to 0x01300000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space.
- */
-
-#ifndef __MACH_S3C24XX_OTOM_H
-#define __MACH_S3C24XX_OTOM_H __FILE__
-
-#define OTOM_PA_CS8900A_BASE	(S3C2410_CS3 + 0x01000000)	/* nGCS3 +0x01000000 */
-#define OTOM_VA_CS8900A_BASE	S3C2410_ADDR(0x04000000)	/* 0xF4000000 */
-
-/* physical offset addresses for the peripherals */
-
-#define OTOM_PA_FLASH0_BASE	(S3C2410_CS0)
-
-#endif /* __MACH_S3C24XX_OTOM_H */
diff --git a/arch/arm/mach-s3c/pll-s3c2410.c b/arch/arm/mach-s3c/pll-s3c2410.c
deleted file mode 100644
index 3fbc99eaa4a2..000000000000
--- a/arch/arm/mach-s3c/pll-s3c2410.c
+++ /dev/null
@@ -1,83 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2006-2007 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//	Vincent Sanders <vince@arm.linux.org.uk>
-//
-// S3C2410 CPU PLL tables
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include <linux/soc/samsung/s3c-pm.h>
-
-/* This array should be sorted in ascending order of the frequencies */
-static struct cpufreq_frequency_table pll_vals_12MHz[] = {
-    { .frequency = 34000000,  .driver_data = PLLVAL(82, 2, 3),   },
-    { .frequency = 45000000,  .driver_data = PLLVAL(82, 1, 3),   },
-    { .frequency = 48000000,  .driver_data = PLLVAL(120, 2, 3),  },
-    { .frequency = 51000000,  .driver_data = PLLVAL(161, 3, 3),  },
-    { .frequency = 56000000,  .driver_data = PLLVAL(142, 2, 3),  },
-    { .frequency = 68000000,  .driver_data = PLLVAL(82, 2, 2),   },
-    { .frequency = 79000000,  .driver_data = PLLVAL(71, 1, 2),   },
-    { .frequency = 85000000,  .driver_data = PLLVAL(105, 2, 2),  },
-    { .frequency = 90000000,  .driver_data = PLLVAL(112, 2, 2),  },
-    { .frequency = 101000000, .driver_data = PLLVAL(127, 2, 2),  },
-    { .frequency = 113000000, .driver_data = PLLVAL(105, 1, 2),  },
-    { .frequency = 118000000, .driver_data = PLLVAL(150, 2, 2),  },
-    { .frequency = 124000000, .driver_data = PLLVAL(116, 1, 2),  },
-    { .frequency = 135000000, .driver_data = PLLVAL(82, 2, 1),   },
-    { .frequency = 147000000, .driver_data = PLLVAL(90, 2, 1),   },
-    { .frequency = 152000000, .driver_data = PLLVAL(68, 1, 1),   },
-    { .frequency = 158000000, .driver_data = PLLVAL(71, 1, 1),   },
-    { .frequency = 170000000, .driver_data = PLLVAL(77, 1, 1),   },
-    { .frequency = 180000000, .driver_data = PLLVAL(82, 1, 1),   },
-    { .frequency = 186000000, .driver_data = PLLVAL(85, 1, 1),   },
-    { .frequency = 192000000, .driver_data = PLLVAL(88, 1, 1),   },
-    { .frequency = 203000000, .driver_data = PLLVAL(161, 3, 1),  },
-
-    /* 2410A extras */
-
-    { .frequency = 210000000, .driver_data = PLLVAL(132, 2, 1),  },
-    { .frequency = 226000000, .driver_data = PLLVAL(105, 1, 1),  },
-    { .frequency = 266000000, .driver_data = PLLVAL(125, 1, 1),  },
-    { .frequency = 268000000, .driver_data = PLLVAL(126, 1, 1),  },
-    { .frequency = 270000000, .driver_data = PLLVAL(127, 1, 1),  },
-};
-
-static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif)
-{
-	return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
-}
-
-static struct subsys_interface s3c2410_plls_interface = {
-	.name		= "s3c2410_plls",
-	.subsys		= &s3c2410_subsys,
-	.add_dev	= s3c2410_plls_add,
-};
-
-static int __init s3c2410_pll_init(void)
-{
-	return subsys_interface_register(&s3c2410_plls_interface);
-
-}
-arch_initcall(s3c2410_pll_init);
-
-static struct subsys_interface s3c2410a_plls_interface = {
-	.name		= "s3c2410a_plls",
-	.subsys		= &s3c2410a_subsys,
-	.add_dev	= s3c2410_plls_add,
-};
-
-static int __init s3c2410a_pll_init(void)
-{
-	return subsys_interface_register(&s3c2410a_plls_interface);
-}
-arch_initcall(s3c2410a_pll_init);
diff --git a/arch/arm/mach-s3c/pll-s3c2440-12000000.c b/arch/arm/mach-s3c/pll-s3c2440-12000000.c
deleted file mode 100644
index fdb8e8c2fe3b..000000000000
--- a/arch/arm/mach-s3c/pll-s3c2440-12000000.c
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006-2007 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//	Vincent Sanders <vince@arm.linux.org.uk>
-//
-// S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include <linux/soc/samsung/s3c-pm.h>
-
-/* This array should be sorted in ascending order of the frequencies */
-static struct cpufreq_frequency_table s3c2440_plls_12[] = {
-	{ .frequency = 75000000,	.driver_data = PLLVAL(0x75, 3, 3),  }, 	/* FVco 600.000000 */
-	{ .frequency = 80000000,	.driver_data = PLLVAL(0x98, 4, 3),  }, 	/* FVco 640.000000 */
-	{ .frequency = 90000000,	.driver_data = PLLVAL(0x70, 2, 3),  }, 	/* FVco 720.000000 */
-	{ .frequency = 100000000,	.driver_data = PLLVAL(0x5c, 1, 3),  }, 	/* FVco 800.000000 */
-	{ .frequency = 110000000,	.driver_data = PLLVAL(0x66, 1, 3),  }, 	/* FVco 880.000000 */
-	{ .frequency = 120000000,	.driver_data = PLLVAL(0x70, 1, 3),  }, 	/* FVco 960.000000 */
-	{ .frequency = 150000000,	.driver_data = PLLVAL(0x75, 3, 2),  }, 	/* FVco 600.000000 */
-	{ .frequency = 160000000,	.driver_data = PLLVAL(0x98, 4, 2),  }, 	/* FVco 640.000000 */
-	{ .frequency = 170000000,	.driver_data = PLLVAL(0x4d, 1, 2),  }, 	/* FVco 680.000000 */
-	{ .frequency = 180000000,	.driver_data = PLLVAL(0x70, 2, 2),  }, 	/* FVco 720.000000 */
-	{ .frequency = 190000000,	.driver_data = PLLVAL(0x57, 1, 2),  }, 	/* FVco 760.000000 */
-	{ .frequency = 200000000,	.driver_data = PLLVAL(0x5c, 1, 2),  }, 	/* FVco 800.000000 */
-	{ .frequency = 210000000,	.driver_data = PLLVAL(0x84, 2, 2),  }, 	/* FVco 840.000000 */
-	{ .frequency = 220000000,	.driver_data = PLLVAL(0x66, 1, 2),  }, 	/* FVco 880.000000 */
-	{ .frequency = 230000000,	.driver_data = PLLVAL(0x6b, 1, 2),  }, 	/* FVco 920.000000 */
-	{ .frequency = 240000000,	.driver_data = PLLVAL(0x70, 1, 2),  }, 	/* FVco 960.000000 */
-	{ .frequency = 300000000,	.driver_data = PLLVAL(0x75, 3, 1),  }, 	/* FVco 600.000000 */
-	{ .frequency = 310000000,	.driver_data = PLLVAL(0x93, 4, 1),  }, 	/* FVco 620.000000 */
-	{ .frequency = 320000000,	.driver_data = PLLVAL(0x98, 4, 1),  }, 	/* FVco 640.000000 */
-	{ .frequency = 330000000,	.driver_data = PLLVAL(0x66, 2, 1),  }, 	/* FVco 660.000000 */
-	{ .frequency = 340000000,	.driver_data = PLLVAL(0x4d, 1, 1),  }, 	/* FVco 680.000000 */
-	{ .frequency = 350000000,	.driver_data = PLLVAL(0xa7, 4, 1),  }, 	/* FVco 700.000000 */
-	{ .frequency = 360000000,	.driver_data = PLLVAL(0x70, 2, 1),  }, 	/* FVco 720.000000 */
-	{ .frequency = 370000000,	.driver_data = PLLVAL(0xb1, 4, 1),  }, 	/* FVco 740.000000 */
-	{ .frequency = 380000000,	.driver_data = PLLVAL(0x57, 1, 1),  }, 	/* FVco 760.000000 */
-	{ .frequency = 390000000,	.driver_data = PLLVAL(0x7a, 2, 1),  }, 	/* FVco 780.000000 */
-	{ .frequency = 400000000,	.driver_data = PLLVAL(0x5c, 1, 1),  }, 	/* FVco 800.000000 */
-};
-
-static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	if (IS_ERR(xtal_clk))
-		return PTR_ERR(xtal_clk);
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	if (xtal == 12000000) {
-		printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
-		return s3c_plltab_register(s3c2440_plls_12,
-					   ARRAY_SIZE(s3c2440_plls_12));
-	}
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_plls12_interface = {
-	.name		= "s3c2440_plls12",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_plls12_add,
-};
-
-static int __init s3c2440_pll_12mhz(void)
-{
-	return subsys_interface_register(&s3c2440_plls12_interface);
-
-}
-arch_initcall(s3c2440_pll_12mhz);
-
-static struct subsys_interface s3c2442_plls12_interface = {
-	.name		= "s3c2442_plls12",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2440_plls12_add,
-};
-
-static int __init s3c2442_pll_12mhz(void)
-{
-	return subsys_interface_register(&s3c2442_plls12_interface);
-
-}
-arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/mach-s3c/pll-s3c2440-16934400.c b/arch/arm/mach-s3c/pll-s3c2440-16934400.c
deleted file mode 100644
index 438b6fc099a4..000000000000
--- a/arch/arm/mach-s3c/pll-s3c2440-16934400.c
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006-2008 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//	Vincent Sanders <vince@arm.linux.org.uk>
-//
-// S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include <linux/soc/samsung/s3c-pm.h>
-
-/* This array should be sorted in ascending order of the frequencies */
-static struct cpufreq_frequency_table s3c2440_plls_169344[] = {
-	{ .frequency = 78019200,	.driver_data = PLLVAL(121, 5, 3), 	}, 	/* FVco 624.153600 */
-	{ .frequency = 84067200,	.driver_data = PLLVAL(131, 5, 3), 	}, 	/* FVco 672.537600 */
-	{ .frequency = 90115200,	.driver_data = PLLVAL(141, 5, 3), 	}, 	/* FVco 720.921600 */
-	{ .frequency = 96163200,	.driver_data = PLLVAL(151, 5, 3), 	}, 	/* FVco 769.305600 */
-	{ .frequency = 102135600,	.driver_data = PLLVAL(185, 6, 3), 	}, 	/* FVco 817.084800 */
-	{ .frequency = 108259200,	.driver_data = PLLVAL(171, 5, 3), 	}, 	/* FVco 866.073600 */
-	{ .frequency = 114307200,	.driver_data = PLLVAL(127, 3, 3), 	}, 	/* FVco 914.457600 */
-	{ .frequency = 120234240,	.driver_data = PLLVAL(134, 3, 3), 	}, 	/* FVco 961.873920 */
-	{ .frequency = 126161280,	.driver_data = PLLVAL(141, 3, 3), 	}, 	/* FVco 1009.290240 */
-	{ .frequency = 132088320,	.driver_data = PLLVAL(148, 3, 3), 	}, 	/* FVco 1056.706560 */
-	{ .frequency = 138015360,	.driver_data = PLLVAL(155, 3, 3), 	}, 	/* FVco 1104.122880 */
-	{ .frequency = 144789120,	.driver_data = PLLVAL(163, 3, 3), 	}, 	/* FVco 1158.312960 */
-	{ .frequency = 150100363,	.driver_data = PLLVAL(187, 9, 2), 	}, 	/* FVco 600.401454 */
-	{ .frequency = 156038400,	.driver_data = PLLVAL(121, 5, 2), 	}, 	/* FVco 624.153600 */
-	{ .frequency = 162086400,	.driver_data = PLLVAL(126, 5, 2), 	}, 	/* FVco 648.345600 */
-	{ .frequency = 168134400,	.driver_data = PLLVAL(131, 5, 2), 	}, 	/* FVco 672.537600 */
-	{ .frequency = 174048000,	.driver_data = PLLVAL(177, 7, 2), 	}, 	/* FVco 696.192000 */
-	{ .frequency = 180230400,	.driver_data = PLLVAL(141, 5, 2), 	}, 	/* FVco 720.921600 */
-	{ .frequency = 186278400,	.driver_data = PLLVAL(124, 4, 2), 	}, 	/* FVco 745.113600 */
-	{ .frequency = 192326400,	.driver_data = PLLVAL(151, 5, 2), 	}, 	/* FVco 769.305600 */
-	{ .frequency = 198132480,	.driver_data = PLLVAL(109, 3, 2), 	}, 	/* FVco 792.529920 */
-	{ .frequency = 204271200,	.driver_data = PLLVAL(185, 6, 2), 	}, 	/* FVco 817.084800 */
-	{ .frequency = 210268800,	.driver_data = PLLVAL(141, 4, 2), 	}, 	/* FVco 841.075200 */
-	{ .frequency = 216518400,	.driver_data = PLLVAL(171, 5, 2), 	}, 	/* FVco 866.073600 */
-	{ .frequency = 222264000,	.driver_data = PLLVAL(97, 2, 2), 	}, 	/* FVco 889.056000 */
-	{ .frequency = 228614400,	.driver_data = PLLVAL(127, 3, 2), 	}, 	/* FVco 914.457600 */
-	{ .frequency = 234259200,	.driver_data = PLLVAL(158, 4, 2), 	}, 	/* FVco 937.036800 */
-	{ .frequency = 240468480,	.driver_data = PLLVAL(134, 3, 2), 	}, 	/* FVco 961.873920 */
-	{ .frequency = 246960000,	.driver_data = PLLVAL(167, 4, 2), 	}, 	/* FVco 987.840000 */
-	{ .frequency = 252322560,	.driver_data = PLLVAL(141, 3, 2), 	}, 	/* FVco 1009.290240 */
-	{ .frequency = 258249600,	.driver_data = PLLVAL(114, 2, 2), 	}, 	/* FVco 1032.998400 */
-	{ .frequency = 264176640,	.driver_data = PLLVAL(148, 3, 2), 	}, 	/* FVco 1056.706560 */
-	{ .frequency = 270950400,	.driver_data = PLLVAL(120, 2, 2), 	}, 	/* FVco 1083.801600 */
-	{ .frequency = 276030720,	.driver_data = PLLVAL(155, 3, 2), 	}, 	/* FVco 1104.122880 */
-	{ .frequency = 282240000,	.driver_data = PLLVAL(92, 1, 2), 	}, 	/* FVco 1128.960000 */
-	{ .frequency = 289578240,	.driver_data = PLLVAL(163, 3, 2), 	}, 	/* FVco 1158.312960 */
-	{ .frequency = 294235200,	.driver_data = PLLVAL(131, 2, 2), 	}, 	/* FVco 1176.940800 */
-	{ .frequency = 300200727,	.driver_data = PLLVAL(187, 9, 1), 	}, 	/* FVco 600.401454 */
-	{ .frequency = 306358690,	.driver_data = PLLVAL(191, 9, 1), 	}, 	/* FVco 612.717380 */
-	{ .frequency = 312076800,	.driver_data = PLLVAL(121, 5, 1), 	}, 	/* FVco 624.153600 */
-	{ .frequency = 318366720,	.driver_data = PLLVAL(86, 3, 1), 	}, 	/* FVco 636.733440 */
-	{ .frequency = 324172800,	.driver_data = PLLVAL(126, 5, 1), 	}, 	/* FVco 648.345600 */
-	{ .frequency = 330220800,	.driver_data = PLLVAL(109, 4, 1), 	}, 	/* FVco 660.441600 */
-	{ .frequency = 336268800,	.driver_data = PLLVAL(131, 5, 1), 	}, 	/* FVco 672.537600 */
-	{ .frequency = 342074880,	.driver_data = PLLVAL(93, 3, 1), 	}, 	/* FVco 684.149760 */
-	{ .frequency = 348096000,	.driver_data = PLLVAL(177, 7, 1), 	}, 	/* FVco 696.192000 */
-	{ .frequency = 355622400,	.driver_data = PLLVAL(118, 4, 1), 	}, 	/* FVco 711.244800 */
-	{ .frequency = 360460800,	.driver_data = PLLVAL(141, 5, 1), 	}, 	/* FVco 720.921600 */
-	{ .frequency = 366206400,	.driver_data = PLLVAL(165, 6, 1), 	}, 	/* FVco 732.412800 */
-	{ .frequency = 372556800,	.driver_data = PLLVAL(124, 4, 1), 	}, 	/* FVco 745.113600 */
-	{ .frequency = 378201600,	.driver_data = PLLVAL(126, 4, 1), 	}, 	/* FVco 756.403200 */
-	{ .frequency = 384652800,	.driver_data = PLLVAL(151, 5, 1), 	}, 	/* FVco 769.305600 */
-	{ .frequency = 391608000,	.driver_data = PLLVAL(177, 6, 1), 	}, 	/* FVco 783.216000 */
-	{ .frequency = 396264960,	.driver_data = PLLVAL(109, 3, 1), 	}, 	/* FVco 792.529920 */
-	{ .frequency = 402192000,	.driver_data = PLLVAL(87, 2, 1), 	}, 	/* FVco 804.384000 */
-};
-
-static int s3c2440_plls169344_add(struct device *dev,
-				  struct subsys_interface *sif)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	if (IS_ERR(xtal_clk))
-		return PTR_ERR(xtal_clk);
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	if (xtal == 169344000) {
-		printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
-		return s3c_plltab_register(s3c2440_plls_169344,
-					   ARRAY_SIZE(s3c2440_plls_169344));
-	}
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_plls169344_interface = {
-	.name		= "s3c2440_plls169344",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_plls169344_add,
-};
-
-static int __init s3c2440_pll_16934400(void)
-{
-	return subsys_interface_register(&s3c2440_plls169344_interface);
-}
-arch_initcall(s3c2440_pll_16934400);
-
-static struct subsys_interface s3c2442_plls169344_interface = {
-	.name		= "s3c2442_plls169344",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2440_plls169344_add,
-};
-
-static int __init s3c2442_pll_16934400(void)
-{
-	return subsys_interface_register(&s3c2442_plls169344_interface);
-}
-arch_initcall(s3c2442_pll_16934400);
diff --git a/arch/arm/mach-s3c/pm-core-s3c24xx.h b/arch/arm/mach-s3c/pm-core-s3c24xx.h
deleted file mode 100644
index a71ed5711019..000000000000
--- a/arch/arm/mach-s3c/pm-core-s3c24xx.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include "regs-clock.h"
-#include "regs-irq-s3c24xx.h"
-#include "irqs.h"
-
-static inline void s3c_pm_debug_init_uart(void)
-{
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-	unsigned long tmp = __raw_readl(S3C2410_CLKCON);
-
-	/* re-start uart clocks */
-	tmp |= S3C2410_CLKCON_UART0;
-	tmp |= S3C2410_CLKCON_UART1;
-	tmp |= S3C2410_CLKCON_UART2;
-
-	__raw_writel(tmp, S3C2410_CLKCON);
-	udelay(10);
-#endif
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
-	__raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
-	__raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
-
-	/* ack any outstanding external interrupts before we go to sleep */
-
-	__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
-	__raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
-	__raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
-
-}
-
-static inline void s3c_pm_arch_stop_clocks(void)
-{
-	__raw_writel(0x00, S3C2410_CLKCON);  /* turn off clocks over sleep */
-}
-
-/* s3c2410_pm_show_resume_irqs
- *
- * print any IRQs asserted at resume time (ie, we woke from)
-*/
-static inline void s3c_pm_show_resume_irqs(int start, unsigned long which,
-					   unsigned long mask)
-{
-	int i;
-
-	which &= ~mask;
-
-	for (i = 0; i <= 31; i++) {
-		if (which & (1L<<i)) {
-			S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
-		}
-	}
-}
-
-static inline void s3c_pm_arch_show_resume_irqs(void)
-{
-	S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n",
-		  __raw_readl(S3C2410_SRCPND),
-		  __raw_readl(S3C2410_EINTPEND));
-
-	s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
-				s3c_irqwake_intmask);
-
-	s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
-				s3c_irqwake_eintmask);
-}
-
-static inline void s3c_pm_restored_gpios(void) { }
-static inline void samsung_pm_saved_gpios(void) { }
-
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-#ifdef CONFIG_PM_SLEEP
-#define s3c_irqwake_intallow	(1L << 30 | 0xfL)
-#define s3c_irqwake_eintallow	(0x0000fff0L)
-#else
-#define s3c_irqwake_eintallow 0
-#define s3c_irqwake_intallow  0
-#endif
diff --git a/arch/arm/mach-s3c/pm-core-s3c64xx.h b/arch/arm/mach-s3c/pm-core-s3c64xx.h
index 06f564e5cf63..24933c4ea1a2 100644
--- a/arch/arm/mach-s3c/pm-core-s3c64xx.h
+++ b/arch/arm/mach-s3c/pm-core-s3c64xx.h
@@ -20,23 +20,6 @@
 
 static inline void s3c_pm_debug_init_uart(void)
 {
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-	u32 tmp = __raw_readl(S3C_PCLK_GATE);
-
-	/* As a note, since the S3C64XX UARTs generally have multiple
-	 * clock sources, we simply enable PCLK at the moment and hope
-	 * that the resume settings for the UART are suitable for the
-	 * use with PCLK.
-	 */
-
-	tmp |= S3C_CLKCON_PCLK_UART0;
-	tmp |= S3C_CLKCON_PCLK_UART1;
-	tmp |= S3C_CLKCON_PCLK_UART2;
-	tmp |= S3C_CLKCON_PCLK_UART3;
-
-	__raw_writel(tmp, S3C_PCLK_GATE);
-	udelay(10);
-#endif
 }
 
 static inline void s3c_pm_arch_prepare_irqs(void)
diff --git a/arch/arm/mach-s3c/pm-core.h b/arch/arm/mach-s3c/pm-core.h
index b0e1d277f599..3e0c2df79120 100644
--- a/arch/arm/mach-s3c/pm-core.h
+++ b/arch/arm/mach-s3c/pm-core.h
@@ -1,9 +1,2 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "pm-core-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
 #include "pm-core-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/pm-h1940.S b/arch/arm/mach-s3c/pm-h1940.S
deleted file mode 100644
index 3bf6685123cb..000000000000
--- a/arch/arm/mach-s3c/pm-h1940.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2006 Ben Dooks <ben-linux@fluff.org>
- *
- * H1940 Suspend to RAM
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include "map.h"
-
-#include "regs-gpio.h"
-
-	.text
-	.global	h1940_pm_return
-
-h1940_pm_return:
-	mov	r0, #S3C2410_PA_GPIO
-	ldr	pc, [r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO]
diff --git a/arch/arm/mach-s3c/pm-s3c2410.c b/arch/arm/mach-s3c/pm-s3c2410.c
deleted file mode 100644
index a66419883735..000000000000
--- a/arch/arm/mach-s3c/pm-s3c2410.c
+++ /dev/null
@@ -1,170 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2006 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <asm/mach-types.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "gpio-cfg.h"
-#include "cpu.h"
-#include "pm.h"
-
-#include "h1940.h"
-
-static void s3c2410_pm_prepare(void)
-{
-	/* ensure at least GSTATUS3 has the resume address */
-
-	__raw_writel(__pa_symbol(s3c_cpu_resume), S3C2410_GSTATUS3);
-
-	S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
-	S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
-
-	if (machine_is_h1940()) {
-		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
-		unsigned long ptr;
-		unsigned long calc = 0;
-
-		/* generate check for the bootloader to check on resume */
-
-		for (ptr = 0; ptr < 0x40000; ptr += 0x400)
-			calc += __raw_readl(base+ptr);
-
-		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
-	}
-
-	/* RX3715 and RX1950 use similar to H1940 code and the
-	 * same offsets for resume and checksum pointers */
-
-	if (machine_is_rx3715() || machine_is_rx1950()) {
-		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
-		unsigned long ptr;
-		unsigned long calc = 0;
-
-		/* generate check for the bootloader to check on resume */
-
-		for (ptr = 0; ptr < 0x40000; ptr += 0x4)
-			calc += __raw_readl(base+ptr);
-
-		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
-	}
-
-	if (machine_is_aml_m5900()) {
-		gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_HIGH, NULL);
-		gpio_free(S3C2410_GPF(2));
-	}
-
-	if (machine_is_rx1950()) {
-		/* According to S3C2442 user's manual, page 7-17,
-		 * when the system is operating in NAND boot mode,
-		 * the hardware pin configuration - EINT[23:21] –
-		 * must be set as input for starting up after
-		 * wakeup from sleep mode
-		 */
-		s3c_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPIO_INPUT);
-	}
-}
-
-static void s3c2410_pm_resume(void)
-{
-	unsigned long tmp;
-
-	/* unset the return-from-sleep flag, to ensure reset */
-
-	tmp = __raw_readl(S3C2410_GSTATUS2);
-	tmp &= S3C2410_GSTATUS2_OFFRESET;
-	__raw_writel(tmp, S3C2410_GSTATUS2);
-
-	if (machine_is_aml_m5900()) {
-		gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL);
-		gpio_free(S3C2410_GPF(2));
-	}
-}
-
-struct syscore_ops s3c2410_pm_syscore_ops = {
-	.resume		= s3c2410_pm_resume,
-};
-
-static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif)
-{
-	pm_cpu_prep = s3c2410_pm_prepare;
-	pm_cpu_sleep = s3c2410_cpu_suspend;
-
-	return 0;
-}
-
-#if defined(CONFIG_CPU_S3C2410)
-static struct subsys_interface s3c2410_pm_interface = {
-	.name		= "s3c2410_pm",
-	.subsys		= &s3c2410_subsys,
-	.add_dev	= s3c2410_pm_add,
-};
-
-/* register ourselves */
-
-static int __init s3c2410_pm_drvinit(void)
-{
-	return subsys_interface_register(&s3c2410_pm_interface);
-}
-
-arch_initcall(s3c2410_pm_drvinit);
-
-static struct subsys_interface s3c2410a_pm_interface = {
-	.name		= "s3c2410a_pm",
-	.subsys		= &s3c2410a_subsys,
-	.add_dev	= s3c2410_pm_add,
-};
-
-static int __init s3c2410a_pm_drvinit(void)
-{
-	return subsys_interface_register(&s3c2410a_pm_interface);
-}
-
-arch_initcall(s3c2410a_pm_drvinit);
-#endif
-
-#if defined(CONFIG_CPU_S3C2440)
-static struct subsys_interface s3c2440_pm_interface = {
-	.name		= "s3c2440_pm",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2410_pm_add,
-};
-
-static int __init s3c2440_pm_drvinit(void)
-{
-	return subsys_interface_register(&s3c2440_pm_interface);
-}
-
-arch_initcall(s3c2440_pm_drvinit);
-#endif
-
-#if defined(CONFIG_CPU_S3C2442)
-static struct subsys_interface s3c2442_pm_interface = {
-	.name		= "s3c2442_pm",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2410_pm_add,
-};
-
-static int __init s3c2442_pm_drvinit(void)
-{
-	return subsys_interface_register(&s3c2442_pm_interface);
-}
-
-arch_initcall(s3c2442_pm_drvinit);
-#endif
diff --git a/arch/arm/mach-s3c/pm-s3c2412.c b/arch/arm/mach-s3c/pm-s3c2412.c
deleted file mode 100644
index ed3b4cfc7c0f..000000000000
--- a/arch/arm/mach-s3c/pm-s3c2412.c
+++ /dev/null
@@ -1,126 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// http://armlinux.simtec.co.uk/.
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/irq.h>
-
-#include "irqs.h"
-#include "regs-gpio.h"
-
-#include "cpu.h"
-#include "pm.h"
-#include "wakeup-mask.h"
-
-#include "regs-dsc-s3c24xx.h"
-#include "s3c2412-power.h"
-
-extern void s3c2412_sleep_enter(void);
-
-static int s3c2412_cpu_suspend(unsigned long arg)
-{
-	unsigned long tmp;
-
-	/* set our standby method to sleep */
-
-	tmp = __raw_readl(S3C2412_PWRCFG);
-	tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP;
-	__raw_writel(tmp, S3C2412_PWRCFG);
-
-	s3c2412_sleep_enter();
-
-	pr_info("Failed to suspend the system\n");
-	return 1; /* Aborting suspend */
-}
-
-/* mapping of interrupts to parts of the wakeup mask */
-static const struct samsung_wakeup_mask wake_irqs[] = {
-	{ .irq = IRQ_RTC,	.bit = S3C2412_PWRCFG_RTC_MASKIRQ, },
-};
-
-static void s3c2412_pm_prepare(void)
-{
-	samsung_sync_wakemask(S3C2412_PWRCFG,
-			      wake_irqs, ARRAY_SIZE(wake_irqs));
-}
-
-static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif)
-{
-	pm_cpu_prep = s3c2412_pm_prepare;
-	pm_cpu_sleep = s3c2412_cpu_suspend;
-
-	return 0;
-}
-
-static struct sleep_save s3c2412_sleep[] = {
-	SAVE_ITEM(S3C2412_DSC0),
-	SAVE_ITEM(S3C2412_DSC1),
-	SAVE_ITEM(S3C2413_GPJDAT),
-	SAVE_ITEM(S3C2413_GPJCON),
-	SAVE_ITEM(S3C2413_GPJUP),
-
-	/* save the PWRCFG to get back to original sleep method */
-
-	SAVE_ITEM(S3C2412_PWRCFG),
-
-	/* save the sleep configuration anyway, just in case these
-	 * get damaged during wakeup */
-
-	SAVE_ITEM(S3C2412_GPBSLPCON),
-	SAVE_ITEM(S3C2412_GPCSLPCON),
-	SAVE_ITEM(S3C2412_GPDSLPCON),
-	SAVE_ITEM(S3C2412_GPFSLPCON),
-	SAVE_ITEM(S3C2412_GPGSLPCON),
-	SAVE_ITEM(S3C2412_GPHSLPCON),
-	SAVE_ITEM(S3C2413_GPJSLPCON),
-};
-
-static struct subsys_interface s3c2412_pm_interface = {
-	.name		= "s3c2412_pm",
-	.subsys		= &s3c2412_subsys,
-	.add_dev	= s3c2412_pm_add,
-};
-
-static __init int s3c2412_pm_init(void)
-{
-	return subsys_interface_register(&s3c2412_pm_interface);
-}
-
-arch_initcall(s3c2412_pm_init);
-
-static int s3c2412_pm_suspend(void)
-{
-	s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
-	return 0;
-}
-
-static void s3c2412_pm_resume(void)
-{
-	unsigned long tmp;
-
-	tmp = __raw_readl(S3C2412_PWRCFG);
-	tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
-	tmp |=  S3C2412_PWRCFG_STANDBYWFI_IDLE;
-	__raw_writel(tmp, S3C2412_PWRCFG);
-
-	s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
-}
-
-struct syscore_ops s3c2412_pm_syscore_ops = {
-	.suspend	= s3c2412_pm_suspend,
-	.resume		= s3c2412_pm_resume,
-};
diff --git a/arch/arm/mach-s3c/pm-s3c2416.c b/arch/arm/mach-s3c/pm-s3c2416.c
deleted file mode 100644
index f69ad84cf4ff..000000000000
--- a/arch/arm/mach-s3c/pm-s3c2416.c
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2010 Samsung Electronics Co., Ltd.
-//		http://www.samsung.com
-//
-// S3C2416 - PM support (Based on Ben Dooks' S3C2412 PM support)
-
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-
-#include "regs-s3c2443-clock.h"
-
-#include "cpu.h"
-#include "pm.h"
-
-#include "s3c2412-power.h"
-
-#ifdef CONFIG_PM_SLEEP
-extern void s3c2412_sleep_enter(void);
-
-static int s3c2416_cpu_suspend(unsigned long arg)
-{
-	/* enable wakeup sources regardless of battery state */
-	__raw_writel(S3C2443_PWRCFG_SLEEP, S3C2443_PWRCFG);
-
-	/* set the mode as sleep, 2BED represents "Go to BED" */
-	__raw_writel(0x2BED, S3C2443_PWRMODE);
-
-	s3c2412_sleep_enter();
-
-	pr_info("Failed to suspend the system\n");
-	return 1; /* Aborting suspend */
-}
-
-static void s3c2416_pm_prepare(void)
-{
-	/*
-	 * write the magic value u-boot uses to check for resume into
-	 * the INFORM0 register, and ensure INFORM1 is set to the
-	 * correct address to resume from.
-	 */
-	__raw_writel(0x2BED, S3C2412_INFORM0);
-	__raw_writel(__pa_symbol(s3c_cpu_resume), S3C2412_INFORM1);
-}
-
-static int s3c2416_pm_add(struct device *dev, struct subsys_interface *sif)
-{
-	pm_cpu_prep = s3c2416_pm_prepare;
-	pm_cpu_sleep = s3c2416_cpu_suspend;
-
-	return 0;
-}
-
-static struct subsys_interface s3c2416_pm_interface = {
-	.name		= "s3c2416_pm",
-	.subsys		= &s3c2416_subsys,
-	.add_dev	= s3c2416_pm_add,
-};
-
-static __init int s3c2416_pm_init(void)
-{
-	return subsys_interface_register(&s3c2416_pm_interface);
-}
-
-arch_initcall(s3c2416_pm_init);
-#endif
-
-static void s3c2416_pm_resume(void)
-{
-	/* unset the return-from-sleep amd inform flags */
-	__raw_writel(0x0, S3C2443_PWRMODE);
-	__raw_writel(0x0, S3C2412_INFORM0);
-	__raw_writel(0x0, S3C2412_INFORM1);
-}
-
-struct syscore_ops s3c2416_pm_syscore_ops = {
-	.resume		= s3c2416_pm_resume,
-};
diff --git a/arch/arm/mach-s3c/pm-s3c24xx.c b/arch/arm/mach-s3c/pm-s3c24xx.c
deleted file mode 100644
index 3a8f5c38882e..000000000000
--- a/arch/arm/mach-s3c/pm-s3c24xx.c
+++ /dev/null
@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2004-2006 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// S3C24XX Power Manager (Suspend-To-RAM) support
-//
-// See Documentation/arm/samsung-s3c24xx/suspend.rst for more information
-//
-// Parts based on arch/arm/mach-pxa/pm.c
-//
-// Thanks to Dimitry Andric for debugging
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include "regs-clock.h"
-#include "regs-gpio.h"
-#include "regs-irq.h"
-#include "gpio-samsung.h"
-
-#include <asm/mach/time.h>
-
-#include "gpio-cfg.h"
-#include "pm.h"
-
-#include "regs-mem-s3c24xx.h"
-
-#define PFX "s3c24xx-pm: "
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save core_save[] = {
-	/* we restore the timings here, with the proviso that the board
-	 * brings the system up in an slower, or equal frequency setting
-	 * to the original system.
-	 *
-	 * if we cannot guarantee this, then things are going to go very
-	 * wrong here, as we modify the refresh and both pll settings.
-	 */
-
-	SAVE_ITEM(S3C2410_BWSCON),
-	SAVE_ITEM(S3C2410_BANKCON0),
-	SAVE_ITEM(S3C2410_BANKCON1),
-	SAVE_ITEM(S3C2410_BANKCON2),
-	SAVE_ITEM(S3C2410_BANKCON3),
-	SAVE_ITEM(S3C2410_BANKCON4),
-	SAVE_ITEM(S3C2410_BANKCON5),
-};
-#endif
-
-/* s3c_pm_check_resume_pin
- *
- * check to see if the pin is configured correctly for sleep mode, and
- * make any necessary adjustments if it is not
-*/
-
-static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
-{
-	unsigned long irqstate;
-	unsigned long pinstate;
-	int irq = gpio_to_irq(pin);
-
-	if (irqoffs < 4)
-		irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
-	else
-		irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
-
-	pinstate = s3c_gpio_getcfg(pin);
-
-	if (!irqstate) {
-		if (pinstate == S3C2410_GPIO_IRQ)
-			S3C_PMDBG("Leaving IRQ %d (pin %d) as is\n", irq, pin);
-	} else {
-		if (pinstate == S3C2410_GPIO_IRQ) {
-			S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin);
-			s3c_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
-		}
-	}
-}
-
-/* s3c_pm_configure_extint
- *
- * configure all external interrupt pins
-*/
-
-void s3c_pm_configure_extint(void)
-{
-	int pin;
-
-	/* for each of the external interrupts (EINT0..EINT15) we
-	 * need to check whether it is an external interrupt source,
-	 * and then configure it as an input if it is not
-	*/
-
-	for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
-		s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
-	}
-
-	for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
-		s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
-	}
-}
-
-#ifdef CONFIG_PM_SLEEP
-void s3c_pm_restore_core(void)
-{
-	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
-}
-
-void s3c_pm_save_core(void)
-{
-	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
-}
-#endif
diff --git a/arch/arm/mach-s3c/pm-s3c64xx.c b/arch/arm/mach-s3c/pm-s3c64xx.c
index 7bc7417fd803..284d5f462513 100644
--- a/arch/arm/mach-s3c/pm-s3c64xx.c
+++ b/arch/arm/mach-s3c/pm-s3c64xx.c
@@ -173,23 +173,6 @@ static struct s3c64xx_pm_domain *s3c64xx_pm_domains[] = {
 	&s3c64xx_pm_f,
 };
 
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-void s3c_pm_debug_smdkled(u32 set, u32 clear)
-{
-	unsigned long flags;
-	int i;
-
-	local_irq_save(flags);
-	for (i = 0; i < 4; i++) {
-		if (clear & (1 << i))
-			gpio_set_value(S3C64XX_GPN(12 + i), 0);
-		if (set & (1 << i))
-			gpio_set_value(S3C64XX_GPN(12 + i), 1);
-	}
-	local_irq_restore(flags);
-}
-#endif
-
 #ifdef CONFIG_PM_SLEEP
 static struct sleep_save core_save[] = {
 	SAVE_ITEM(S3C64XX_MEM0DRVCON),
@@ -224,8 +207,6 @@ void s3c_pm_restore_core(void)
 {
 	__raw_writel(0, S3C64XX_EINT_MASK);
 
-	s3c_pm_debug_smdkled(1 << 2, 0);
-
 	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
 	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
 }
@@ -258,9 +239,6 @@ static int s3c64xx_cpu_suspend(unsigned long arg)
 	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
 		     S3C64XX_WAKEUP_STAT);
 
-	/* set the LED state to 0110 over sleep */
-	s3c_pm_debug_smdkled(3 << 1, 0xf);
-
 	/* issue the standby signal into the pm unit. Note, we
 	 * issue a write-buffer drain just in case */
 
@@ -305,56 +283,6 @@ static void s3c64xx_pm_prepare(void)
 	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
 }
 
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
-{
-	u32 ucon;
-	u32 ucon_clk
-	u32 save_clk;
-	u32 new_ucon;
-	u32 delta;
-
-	if (!soc_is_s3c64xx())
-		return;
-
-	ucon = __raw_readl(regs + S3C2410_UCON);
-	ucon_clk = ucon & S3C6400_UCON_CLKMASK;
-	sav_clk = save->ucon & S3C6400_UCON_CLKMASK;
-
-	/* S3C64XX UART blocks only support level interrupts, so ensure that
-	 * when we restore unused UART blocks we force the level interrupt
-	 * settings. */
-	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
-
-	/* We have a constraint on changing the clock type of the UART
-	 * between UCLKx and PCLK, so ensure that when we restore UCON
-	 * that the CLK field is correctly modified if the bootloader
-	 * has changed anything.
-	 */
-	if (ucon_clk != save_clk) {
-		new_ucon = save->ucon;
-		delta = ucon_clk ^ save_clk;
-
-		/* change from UCLKx => wrong PCLK,
-		 * either UCLK can be tested for by a bit-test
-		 * with UCLK0 */
-		if (ucon_clk & S3C6400_UCON_UCLK0 &&
-		    !(save_clk & S3C6400_UCON_UCLK0) &&
-		    delta & S3C6400_UCON_PCLK2) {
-			new_ucon &= ~S3C6400_UCON_UCLK0;
-		} else if (delta == S3C6400_UCON_PCLK2) {
-			/* as an precaution, don't change from
-			 * PCLK2 => PCLK or vice-versa */
-			new_ucon ^= S3C6400_UCON_PCLK2;
-		}
-
-		S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
-			  ucon, new_ucon, save->ucon);
-		save->ucon = new_ucon;
-	}
-}
-#endif
-
 int __init s3c64xx_pm_init(void)
 {
 	int i;
@@ -384,17 +312,6 @@ static __init int s3c64xx_pm_initcall(void)
 	pm_cpu_prep = s3c64xx_pm_prepare;
 	pm_cpu_sleep = s3c64xx_cpu_suspend;
 
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-	gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");
-	gpio_request(S3C64XX_GPN(13), "DEBUG_LED1");
-	gpio_request(S3C64XX_GPN(14), "DEBUG_LED2");
-	gpio_request(S3C64XX_GPN(15), "DEBUG_LED3");
-	gpio_direction_output(S3C64XX_GPN(12), 0);
-	gpio_direction_output(S3C64XX_GPN(13), 0);
-	gpio_direction_output(S3C64XX_GPN(14), 0);
-	gpio_direction_output(S3C64XX_GPN(15), 0);
-#endif
-
 	return 0;
 }
 arch_initcall(s3c64xx_pm_initcall);
diff --git a/arch/arm/mach-s3c/pm.c b/arch/arm/mach-s3c/pm.c
index 06f019690d81..5698cbceaf7a 100644
--- a/arch/arm/mach-s3c/pm.c
+++ b/arch/arm/mach-s3c/pm.c
@@ -100,7 +100,7 @@ static int s3c_pm_enter(suspend_state_t state)
 		samsung_pm_saved_gpios();
 	}
 
-	s3c_pm_save_uarts(soc_is_s3c2410());
+	s3c_pm_save_uarts(false);
 	s3c_pm_save_core();
 
 	/* set the irq configuration for wake */
@@ -137,7 +137,7 @@ static int s3c_pm_enter(suspend_state_t state)
 	/* restore the system state */
 
 	s3c_pm_restore_core();
-	s3c_pm_restore_uarts(soc_is_s3c2410());
+	s3c_pm_restore_uarts(false);
 
 	if (!of_have_populated_dt()) {
 		samsung_pm_restore_gpios();
@@ -152,9 +152,6 @@ static int s3c_pm_enter(suspend_state_t state)
 
 	S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
 
-	/* LEDs should now be 1110 */
-	s3c_pm_debug_smdkled(1 << 1, 0);
-
 	s3c_pm_check_restore();
 
 	/* ok, let's return from sleep */
diff --git a/arch/arm/mach-s3c/pm.h b/arch/arm/mach-s3c/pm.h
index eed61e585457..d48d15088525 100644
--- a/arch/arm/mach-s3c/pm.h
+++ b/arch/arm/mach-s3c/pm.h
@@ -48,8 +48,6 @@ extern unsigned long s3c_pm_flags;
 
 /* from sleep.S */
 
-extern int s3c2410_cpu_suspend(unsigned long);
-
 #ifdef CONFIG_PM_SLEEP
 extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
 extern void s3c_cpu_resume(void);
@@ -64,18 +62,6 @@ extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
 #define s3c_irqext_wake NULL
 #endif
 
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-/**
- * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
- * @set: set bits for the state of the LEDs
- * @clear: clear bits for the state of the LEDs.
- */
-extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
-
-#else
-static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
-#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
-
 /**
  * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ
  *
diff --git a/arch/arm/mach-s3c/regs-adc.h b/arch/arm/mach-s3c/regs-adc.h
deleted file mode 100644
index 58953c7381dd..000000000000
--- a/arch/arm/mach-s3c/regs-adc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2004 Shannon Holland <holland@loser.net>
- *
- * S3C2410 ADC registers
- */
-
-#ifndef __ASM_ARCH_REGS_ADC_H
-#define __ASM_ARCH_REGS_ADC_H "regs-adc.h"
-
-#define S3C2410_ADCREG(x) (x)
-
-#define S3C2410_ADCCON	   S3C2410_ADCREG(0x00)
-#define S3C2410_ADCTSC	   S3C2410_ADCREG(0x04)
-#define S3C2410_ADCDLY	   S3C2410_ADCREG(0x08)
-#define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
-#define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
-#define S3C64XX_ADCUPDN		S3C2410_ADCREG(0x14)
-#define S3C2443_ADCMUX		S3C2410_ADCREG(0x18)
-#define S3C64XX_ADCCLRINT	S3C2410_ADCREG(0x18)
-#define S5P_ADCMUX		S3C2410_ADCREG(0x1C)
-#define S3C64XX_ADCCLRINTPNDNUP	S3C2410_ADCREG(0x20)
-
-
-/* ADCCON Register Bits */
-#define S3C64XX_ADCCON_RESSEL		(1<<16)
-#define S3C2410_ADCCON_ECFLG		(1<<15)
-#define S3C2410_ADCCON_PRSCEN		(1<<14)
-#define S3C2410_ADCCON_PRSCVL(x)	(((x)&0xFF)<<6)
-#define S3C2410_ADCCON_PRSCVLMASK	(0xFF<<6)
-#define S3C2410_ADCCON_SELMUX(x)	(((x)&0x7)<<3)
-#define S3C2410_ADCCON_MUXMASK		(0x7<<3)
-#define S3C2416_ADCCON_RESSEL		(1 << 3)
-#define S3C2410_ADCCON_STDBM		(1<<2)
-#define S3C2410_ADCCON_READ_START	(1<<1)
-#define S3C2410_ADCCON_ENABLE_START	(1<<0)
-#define S3C2410_ADCCON_STARTMASK	(0x3<<0)
-
-
-/* ADCTSC Register Bits */
-#define S3C2443_ADCTSC_UD_SEN		(1 << 8)
-#define S3C2410_ADCTSC_YM_SEN		(1<<7)
-#define S3C2410_ADCTSC_YP_SEN		(1<<6)
-#define S3C2410_ADCTSC_XM_SEN		(1<<5)
-#define S3C2410_ADCTSC_XP_SEN		(1<<4)
-#define S3C2410_ADCTSC_PULL_UP_DISABLE	(1<<3)
-#define S3C2410_ADCTSC_AUTO_PST		(1<<2)
-#define S3C2410_ADCTSC_XY_PST(x)	(((x)&0x3)<<0)
-
-/* ADCDAT0 Bits */
-#define S3C2410_ADCDAT0_UPDOWN		(1<<15)
-#define S3C2410_ADCDAT0_AUTO_PST	(1<<14)
-#define S3C2410_ADCDAT0_XY_PST		(0x3<<12)
-#define S3C2410_ADCDAT0_XPDATA_MASK	(0x03FF)
-
-/* ADCDAT1 Bits */
-#define S3C2410_ADCDAT1_UPDOWN		(1<<15)
-#define S3C2410_ADCDAT1_AUTO_PST	(1<<14)
-#define S3C2410_ADCDAT1_XY_PST		(0x3<<12)
-#define S3C2410_ADCDAT1_YPDATA_MASK	(0x03FF)
-
-#endif /* __ASM_ARCH_REGS_ADC_H */
-
-
diff --git a/arch/arm/mach-s3c/regs-clock-s3c24xx.h b/arch/arm/mach-s3c/regs-clock-s3c24xx.h
deleted file mode 100644
index 933ddb5eedec..000000000000
--- a/arch/arm/mach-s3c/regs-clock-s3c24xx.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C2410 clock register definitions
- */
-
-#ifndef __ASM_ARM_REGS_CLOCK
-#define __ASM_ARM_REGS_CLOCK
-
-#include "map.h"
-
-#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
-
-#define S3C2410_LOCKTIME    S3C2410_CLKREG(0x00)
-#define S3C2410_MPLLCON	    S3C2410_CLKREG(0x04)
-#define S3C2410_UPLLCON	    S3C2410_CLKREG(0x08)
-#define S3C2410_CLKCON	    S3C2410_CLKREG(0x0C)
-#define S3C2410_CLKSLOW	    S3C2410_CLKREG(0x10)
-#define S3C2410_CLKDIVN	    S3C2410_CLKREG(0x14)
-
-#define S3C2410_CLKCON_IDLE	     (1<<2)
-#define S3C2410_CLKCON_POWER	     (1<<3)
-#define S3C2410_CLKCON_NAND	     (1<<4)
-#define S3C2410_CLKCON_LCDC	     (1<<5)
-#define S3C2410_CLKCON_USBH	     (1<<6)
-#define S3C2410_CLKCON_USBD	     (1<<7)
-#define S3C2410_CLKCON_PWMT	     (1<<8)
-#define S3C2410_CLKCON_SDI	     (1<<9)
-#define S3C2410_CLKCON_UART0	     (1<<10)
-#define S3C2410_CLKCON_UART1	     (1<<11)
-#define S3C2410_CLKCON_UART2	     (1<<12)
-#define S3C2410_CLKCON_GPIO	     (1<<13)
-#define S3C2410_CLKCON_RTC	     (1<<14)
-#define S3C2410_CLKCON_ADC	     (1<<15)
-#define S3C2410_CLKCON_IIC	     (1<<16)
-#define S3C2410_CLKCON_IIS	     (1<<17)
-#define S3C2410_CLKCON_SPI	     (1<<18)
-
-#define S3C2410_CLKDIVN_PDIVN	     (1<<0)
-#define S3C2410_CLKDIVN_HDIVN	     (1<<1)
-
-#define S3C2410_CLKSLOW_UCLK_OFF	(1<<7)
-#define S3C2410_CLKSLOW_MPLL_OFF	(1<<5)
-#define S3C2410_CLKSLOW_SLOW		(1<<4)
-#define S3C2410_CLKSLOW_SLOWVAL(x)	(x)
-#define S3C2410_CLKSLOW_GET_SLOWVAL(x)	((x) & 7)
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-/* extra registers */
-#define S3C2440_CAMDIVN	    S3C2410_CLKREG(0x18)
-
-#define S3C2440_CLKCON_CAMERA        (1<<19)
-#define S3C2440_CLKCON_AC97          (1<<20)
-
-#define S3C2440_CLKDIVN_PDIVN	     (1<<0)
-#define S3C2440_CLKDIVN_HDIVN_MASK   (3<<1)
-#define S3C2440_CLKDIVN_HDIVN_1      (0<<1)
-#define S3C2440_CLKDIVN_HDIVN_2      (1<<1)
-#define S3C2440_CLKDIVN_HDIVN_4_8    (2<<1)
-#define S3C2440_CLKDIVN_HDIVN_3_6    (3<<1)
-#define S3C2440_CLKDIVN_UCLK         (1<<3)
-
-#define S3C2440_CAMDIVN_CAMCLK_MASK  (0xf<<0)
-#define S3C2440_CAMDIVN_CAMCLK_SEL   (1<<4)
-#define S3C2440_CAMDIVN_HCLK3_HALF   (1<<8)
-#define S3C2440_CAMDIVN_HCLK4_HALF   (1<<9)
-#define S3C2440_CAMDIVN_DVSEN        (1<<12)
-
-#define S3C2442_CAMDIVN_CAMCLK_DIV3  (1<<5)
-
-#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */
-
-#if defined(CONFIG_CPU_S3C2412)
-
-#define S3C2412_OSCSET		S3C2410_CLKREG(0x18)
-#define S3C2412_CLKSRC		S3C2410_CLKREG(0x1C)
-
-#define S3C2412_PLLCON_OFF		(1<<20)
-
-#define S3C2412_CLKDIVN_PDIVN		(1<<2)
-#define S3C2412_CLKDIVN_HDIVN_MASK	(3<<0)
-#define S3C2412_CLKDIVN_ARMDIVN		(1<<3)
-#define S3C2412_CLKDIVN_DVSEN		(1<<4)
-#define S3C2412_CLKDIVN_HALFHCLK	(1<<5)
-#define S3C2412_CLKDIVN_USB48DIV	(1<<6)
-#define S3C2412_CLKDIVN_UARTDIV_MASK	(15<<8)
-#define S3C2412_CLKDIVN_UARTDIV_SHIFT	(8)
-#define S3C2412_CLKDIVN_I2SDIV_MASK	(15<<12)
-#define S3C2412_CLKDIVN_I2SDIV_SHIFT	(12)
-#define S3C2412_CLKDIVN_CAMDIV_MASK	(15<<16)
-#define S3C2412_CLKDIVN_CAMDIV_SHIFT	(16)
-
-#define S3C2412_CLKCON_WDT		(1<<28)
-#define S3C2412_CLKCON_SPI		(1<<27)
-#define S3C2412_CLKCON_IIS		(1<<26)
-#define S3C2412_CLKCON_IIC		(1<<25)
-#define S3C2412_CLKCON_ADC		(1<<24)
-#define S3C2412_CLKCON_RTC		(1<<23)
-#define S3C2412_CLKCON_GPIO		(1<<22)
-#define S3C2412_CLKCON_UART2		(1<<21)
-#define S3C2412_CLKCON_UART1		(1<<20)
-#define S3C2412_CLKCON_UART0		(1<<19)
-#define S3C2412_CLKCON_SDI		(1<<18)
-#define S3C2412_CLKCON_PWMT		(1<<17)
-#define S3C2412_CLKCON_USBD		(1<<16)
-#define S3C2412_CLKCON_CAMCLK		(1<<15)
-#define S3C2412_CLKCON_UARTCLK		(1<<14)
-/* missing 13 */
-#define S3C2412_CLKCON_USB_HOST48	(1<<12)
-#define S3C2412_CLKCON_USB_DEV48	(1<<11)
-#define S3C2412_CLKCON_HCLKdiv2		(1<<10)
-#define S3C2412_CLKCON_HCLKx2		(1<<9)
-#define S3C2412_CLKCON_SDRAM		(1<<8)
-/* missing 7 */
-#define S3C2412_CLKCON_USBH		S3C2410_CLKCON_USBH
-#define S3C2412_CLKCON_LCDC		S3C2410_CLKCON_LCDC
-#define S3C2412_CLKCON_NAND		S3C2410_CLKCON_NAND
-#define S3C2412_CLKCON_DMA3		(1<<3)
-#define S3C2412_CLKCON_DMA2		(1<<2)
-#define S3C2412_CLKCON_DMA1		(1<<1)
-#define S3C2412_CLKCON_DMA0		(1<<0)
-
-/* clock sourec controls */
-
-#define S3C2412_CLKSRC_EXTCLKDIV_MASK		(7 << 0)
-#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT		(0)
-#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV	(1<<3)
-#define S3C2412_CLKSRC_MSYSCLK_MPLL		(1<<4)
-#define S3C2412_CLKSRC_USYSCLK_UPLL		(1<<5)
-#define S3C2412_CLKSRC_UARTCLK_MPLL		(1<<8)
-#define S3C2412_CLKSRC_I2SCLK_MPLL		(1<<9)
-#define S3C2412_CLKSRC_USBCLK_HCLK		(1<<10)
-#define S3C2412_CLKSRC_CAMCLK_HCLK		(1<<11)
-#define S3C2412_CLKSRC_UREFCLK_EXTCLK	(1<<12)
-#define S3C2412_CLKSRC_EREFCLK_EXTCLK	(1<<14)
-
-#endif /* CONFIG_CPU_S3C2412 */
-
-#define S3C2416_CLKDIV2		S3C2410_CLKREG(0x28)
-
-#endif /* __ASM_ARM_REGS_CLOCK */
diff --git a/arch/arm/mach-s3c/regs-clock.h b/arch/arm/mach-s3c/regs-clock.h
index 7df31f203d28..fc7e3886b07c 100644
--- a/arch/arm/mach-s3c/regs-clock.h
+++ b/arch/arm/mach-s3c/regs-clock.h
@@ -1,9 +1,2 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "regs-clock-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
 #include "regs-clock-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/regs-dsc-s3c24xx.h b/arch/arm/mach-s3c/regs-dsc-s3c24xx.h
deleted file mode 100644
index 8b8b572aef04..000000000000
--- a/arch/arm/mach-s3c/regs-dsc-s3c24xx.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * S3C2440/S3C2412 Signal Drive Strength Control
- */
-
-
-#ifndef __ASM_ARCH_REGS_DSC_S3C24XX_H
-#define __ASM_ARCH_REGS_DSC_S3C24XX_H __FILE__
-
-/* S3C2412 */
-#define S3C2412_DSC0	   S3C2410_GPIOREG(0xdc)
-#define S3C2412_DSC1	   S3C2410_GPIOREG(0xe0)
-
-/* S3C2440 */
-#define S3C2440_DSC0	   S3C2410_GPIOREG(0xc4)
-#define S3C2440_DSC1	   S3C2410_GPIOREG(0xc8)
-
-#endif	/* __ASM_ARCH_REGS_DSC_S3C24XX_H */
-
diff --git a/arch/arm/mach-s3c/regs-gpio-s3c24xx.h b/arch/arm/mach-s3c/regs-gpio-s3c24xx.h
deleted file mode 100644
index 9a7e262268a7..000000000000
--- a/arch/arm/mach-s3c/regs-gpio-s3c24xx.h
+++ /dev/null
@@ -1,608 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003-2004 Simtec Electronics <linux@simtec.co.uk>
- *	http://www.simtec.co.uk/products/SWLINUX/
- *
- * S3C2410 GPIO register definitions
- */
-
-
-#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H
-
-#include "map-s3c.h"
-
-#define S3C24XX_MISCCR		S3C24XX_GPIOREG2(0x80)
-
-/* general configuration options */
-
-#define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
-#define S3C2410_GPIO_INPUT   (0xFFFFFFF0)	/* not available on A */
-#define S3C2410_GPIO_OUTPUT  (0xFFFFFFF1)
-#define S3C2410_GPIO_IRQ     (0xFFFFFFF2)	/* not available for all */
-#define S3C2410_GPIO_SFN2    (0xFFFFFFF2)	/* bank A => addr/cs/nand */
-#define S3C2410_GPIO_SFN3    (0xFFFFFFF3)	/* not available on A */
-
-/* register address for the GPIO registers.
- * S3C24XX_GPIOREG2 is for the second set of registers in the
- * GPIO which move between s3c2410 and s3c2412 type systems */
-
-#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
-#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
-
-
-/* configure GPIO ports A..G */
-
-/* port A - S3C2410: 22bits, zero in bit X makes pin X output
- * 1 makes port special function, this is default
-*/
-#define S3C2410_GPACON	   S3C2410_GPIOREG(0x00)
-#define S3C2410_GPADAT	   S3C2410_GPIOREG(0x04)
-
-#define S3C2410_GPA0_ADDR0   (1<<0)
-#define S3C2410_GPA1_ADDR16  (1<<1)
-#define S3C2410_GPA2_ADDR17  (1<<2)
-#define S3C2410_GPA3_ADDR18  (1<<3)
-#define S3C2410_GPA4_ADDR19  (1<<4)
-#define S3C2410_GPA5_ADDR20  (1<<5)
-#define S3C2410_GPA6_ADDR21  (1<<6)
-#define S3C2410_GPA7_ADDR22  (1<<7)
-#define S3C2410_GPA8_ADDR23  (1<<8)
-#define S3C2410_GPA9_ADDR24  (1<<9)
-#define S3C2410_GPA10_ADDR25 (1<<10)
-#define S3C2410_GPA11_ADDR26 (1<<11)
-#define S3C2410_GPA12_nGCS1  (1<<12)
-#define S3C2410_GPA13_nGCS2  (1<<13)
-#define S3C2410_GPA14_nGCS3  (1<<14)
-#define S3C2410_GPA15_nGCS4  (1<<15)
-#define S3C2410_GPA16_nGCS5  (1<<16)
-#define S3C2410_GPA17_CLE    (1<<17)
-#define S3C2410_GPA18_ALE    (1<<18)
-#define S3C2410_GPA19_nFWE   (1<<19)
-#define S3C2410_GPA20_nFRE   (1<<20)
-#define S3C2410_GPA21_nRSTOUT (1<<21)
-#define S3C2410_GPA22_nFCE   (1<<22)
-
-/* 0x08 and 0x0c are reserved on S3C2410 */
-
-/* S3C2410:
- * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
- *   00 = input, 01 = output, 10=special function, 11=reserved
-
- * bit 0,1 = pin 0, 2,3= pin 1...
- *
- * CPBUP = pull up resistor control, 1=disabled, 0=enabled
-*/
-
-#define S3C2410_GPBCON	   S3C2410_GPIOREG(0x10)
-#define S3C2410_GPBDAT	   S3C2410_GPIOREG(0x14)
-#define S3C2410_GPBUP	   S3C2410_GPIOREG(0x18)
-
-/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
-
-#define S3C2410_GPB0_TOUT0   (0x02 << 0)
-
-#define S3C2410_GPB1_TOUT1   (0x02 << 2)
-
-#define S3C2410_GPB2_TOUT2   (0x02 << 4)
-
-#define S3C2410_GPB3_TOUT3   (0x02 << 6)
-
-#define S3C2410_GPB4_TCLK0   (0x02 << 8)
-#define S3C2410_GPB4_MASK    (0x03 << 8)
-
-#define S3C2410_GPB5_nXBACK  (0x02 << 10)
-#define S3C2443_GPB5_XBACK   (0x03 << 10)
-
-#define S3C2410_GPB6_nXBREQ  (0x02 << 12)
-#define S3C2443_GPB6_XBREQ   (0x03 << 12)
-
-#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
-#define S3C2443_GPB7_XDACK1  (0x03 << 14)
-
-#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
-
-#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
-#define S3C2443_GPB9_XDACK0  (0x03 << 18)
-
-#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
-#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
-
-#define S3C2410_GPB_PUPDIS(x)  (1<<(x))
-
-/* Port C consits of 16 GPIO/Special function
- *
- * almost identical setup to port b, but the special functions are mostly
- * to do with the video system's sync/etc.
-*/
-
-#define S3C2410_GPCCON	   S3C2410_GPIOREG(0x20)
-#define S3C2410_GPCDAT	   S3C2410_GPIOREG(0x24)
-#define S3C2410_GPCUP	   S3C2410_GPIOREG(0x28)
-#define S3C2410_GPC0_LEND	(0x02 << 0)
-#define S3C2410_GPC1_VCLK	(0x02 << 2)
-#define S3C2410_GPC2_VLINE	(0x02 << 4)
-#define S3C2410_GPC3_VFRAME	(0x02 << 6)
-#define S3C2410_GPC4_VM		(0x02 << 8)
-#define S3C2410_GPC5_LCDVF0	(0x02 << 10)
-#define S3C2410_GPC6_LCDVF1	(0x02 << 12)
-#define S3C2410_GPC7_LCDVF2	(0x02 << 14)
-#define S3C2410_GPC8_VD0	(0x02 << 16)
-#define S3C2410_GPC9_VD1	(0x02 << 18)
-#define S3C2410_GPC10_VD2	(0x02 << 20)
-#define S3C2410_GPC11_VD3	(0x02 << 22)
-#define S3C2410_GPC12_VD4	(0x02 << 24)
-#define S3C2410_GPC13_VD5	(0x02 << 26)
-#define S3C2410_GPC14_VD6	(0x02 << 28)
-#define S3C2410_GPC15_VD7	(0x02 << 30)
-#define S3C2410_GPC_PUPDIS(x)  (1<<(x))
-
-/*
- * S3C2410: Port D consists of 16 GPIO/Special function
- *
- * almost identical setup to port b, but the special functions are mostly
- * to do with the video system's data.
- *
- * almost identical setup to port c
-*/
-
-#define S3C2410_GPDCON	   S3C2410_GPIOREG(0x30)
-#define S3C2410_GPDDAT	   S3C2410_GPIOREG(0x34)
-#define S3C2410_GPDUP	   S3C2410_GPIOREG(0x38)
-
-#define S3C2410_GPD0_VD8	(0x02 << 0)
-#define S3C2442_GPD0_nSPICS1	(0x03 << 0)
-
-#define S3C2410_GPD1_VD9	(0x02 << 2)
-#define S3C2442_GPD1_SPICLK1	(0x03 << 2)
-
-#define S3C2410_GPD2_VD10	(0x02 << 4)
-
-#define S3C2410_GPD3_VD11	(0x02 << 6)
-
-#define S3C2410_GPD4_VD12	(0x02 << 8)
-
-#define S3C2410_GPD5_VD13	(0x02 << 10)
-
-#define S3C2410_GPD6_VD14	(0x02 << 12)
-
-#define S3C2410_GPD7_VD15	(0x02 << 14)
-
-#define S3C2410_GPD8_VD16	(0x02 << 16)
-#define S3C2440_GPD8_SPIMISO1	(0x03 << 16)
-
-#define S3C2410_GPD9_VD17	(0x02 << 18)
-#define S3C2440_GPD9_SPIMOSI1	(0x03 << 18)
-
-#define S3C2410_GPD10_VD18	(0x02 << 20)
-#define S3C2440_GPD10_SPICLK1	(0x03 << 20)
-
-#define S3C2410_GPD11_VD19	(0x02 << 22)
-
-#define S3C2410_GPD12_VD20	(0x02 << 24)
-
-#define S3C2410_GPD13_VD21	(0x02 << 26)
-
-#define S3C2410_GPD14_VD22	(0x02 << 28)
-#define S3C2410_GPD14_nSS1	(0x03 << 28)
-
-#define S3C2410_GPD15_VD23	(0x02 << 30)
-#define S3C2410_GPD15_nSS0	(0x03 << 30)
-
-#define S3C2410_GPD_PUPDIS(x)  (1<<(x))
-
-/* S3C2410:
- * Port E consists of 16 GPIO/Special function
- *
- * again, the same as port B, but dealing with I2S, SDI, and
- * more miscellaneous functions
- *
- * GPIO / interrupt inputs
-*/
-
-#define S3C2410_GPECON	   S3C2410_GPIOREG(0x40)
-#define S3C2410_GPEDAT	   S3C2410_GPIOREG(0x44)
-#define S3C2410_GPEUP	   S3C2410_GPIOREG(0x48)
-
-#define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
-#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
-#define S3C2410_GPE0_MASK      (0x03 << 0)
-
-#define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
-#define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
-#define S3C2410_GPE1_MASK      (0x03 << 2)
-
-#define S3C2410_GPE2_CDCLK     (0x02 << 4)
-#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
-
-#define S3C2410_GPE3_I2SSDI    (0x02 << 6)
-#define S3C2443_GPE3_AC_SDI    (0x03 << 6)
-#define S3C2410_GPE3_nSS0      (0x03 << 6)
-#define S3C2410_GPE3_MASK      (0x03 << 6)
-
-#define S3C2410_GPE4_I2SSDO    (0x02 << 8)
-#define S3C2443_GPE4_AC_SDO    (0x03 << 8)
-#define S3C2410_GPE4_I2SSDI    (0x03 << 8)
-#define S3C2410_GPE4_MASK      (0x03 << 8)
-
-#define S3C2410_GPE5_SDCLK     (0x02 << 10)
-#define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
-#define S3C2443_GPE5_AC_BITCLK (0x03 << 10)
-
-#define S3C2410_GPE6_SDCMD     (0x02 << 12)
-#define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
-#define S3C2443_GPE6_AC_SDI    (0x03 << 12)
-
-#define S3C2410_GPE7_SDDAT0    (0x02 << 14)
-#define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
-#define S3C2443_GPE7_AC_SDO    (0x03 << 14)
-
-#define S3C2410_GPE8_SDDAT1    (0x02 << 16)
-#define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
-#define S3C2443_GPE8_AC_SYNC   (0x03 << 16)
-
-#define S3C2410_GPE9_SDDAT2    (0x02 << 18)
-#define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
-#define S3C2443_GPE9_AC_nRESET (0x03 << 18)
-
-#define S3C2410_GPE10_SDDAT3   (0x02 << 20)
-#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
-
-#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
-
-#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
-
-#define S3C2410_GPE13_SPICLK0  (0x02 << 26)
-
-#define S3C2410_GPE14_IICSCL   (0x02 << 28)
-#define S3C2410_GPE14_MASK     (0x03 << 28)
-
-#define S3C2410_GPE15_IICSDA   (0x02 << 30)
-#define S3C2410_GPE15_MASK     (0x03 << 30)
-
-#define S3C2440_GPE0_ACSYNC    (0x03 << 0)
-#define S3C2440_GPE1_ACBITCLK  (0x03 << 2)
-#define S3C2440_GPE2_ACRESET   (0x03 << 4)
-#define S3C2440_GPE3_ACIN      (0x03 << 6)
-#define S3C2440_GPE4_ACOUT     (0x03 << 8)
-
-#define S3C2410_GPE_PUPDIS(x)  (1<<(x))
-
-/* S3C2410:
- * Port F consists of 8 GPIO/Special function
- *
- * GPIO / interrupt inputs
- *
- * GPFCON has 2 bits for each of the input pins on port F
- *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
- *
- * pull up works like all other ports.
- *
- * GPIO/serial/misc pins
-*/
-
-#define S3C2410_GPFCON	   S3C2410_GPIOREG(0x50)
-#define S3C2410_GPFDAT	   S3C2410_GPIOREG(0x54)
-#define S3C2410_GPFUP	   S3C2410_GPIOREG(0x58)
-
-#define S3C2410_GPF0_EINT0  (0x02 << 0)
-#define S3C2410_GPF1_EINT1  (0x02 << 2)
-#define S3C2410_GPF2_EINT2  (0x02 << 4)
-#define S3C2410_GPF3_EINT3  (0x02 << 6)
-#define S3C2410_GPF4_EINT4  (0x02 << 8)
-#define S3C2410_GPF5_EINT5  (0x02 << 10)
-#define S3C2410_GPF6_EINT6  (0x02 << 12)
-#define S3C2410_GPF7_EINT7  (0x02 << 14)
-#define S3C2410_GPF_PUPDIS(x)  (1<<(x))
-
-/* S3C2410:
- * Port G consists of 8 GPIO/IRQ/Special function
- *
- * GPGCON has 2 bits for each of the input pins on port G
- *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
- *
- * pull up works like all other ports.
-*/
-
-#define S3C2410_GPGCON	   S3C2410_GPIOREG(0x60)
-#define S3C2410_GPGDAT	   S3C2410_GPIOREG(0x64)
-#define S3C2410_GPGUP	   S3C2410_GPIOREG(0x68)
-
-#define S3C2410_GPG0_EINT8    (0x02 << 0)
-
-#define S3C2410_GPG1_EINT9    (0x02 << 2)
-
-#define S3C2410_GPG2_EINT10   (0x02 << 4)
-#define S3C2410_GPG2_nSS0     (0x03 << 4)
-
-#define S3C2410_GPG3_EINT11   (0x02 << 6)
-#define S3C2410_GPG3_nSS1     (0x03 << 6)
-
-#define S3C2410_GPG4_EINT12   (0x02 << 8)
-#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
-#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
-
-#define S3C2410_GPG5_EINT13   (0x02 << 10)
-#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
-
-#define S3C2410_GPG6_EINT14   (0x02 << 12)
-#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
-
-#define S3C2410_GPG7_EINT15   (0x02 << 14)
-#define S3C2410_GPG7_SPICLK1  (0x03 << 14)
-
-#define S3C2410_GPG8_EINT16   (0x02 << 16)
-
-#define S3C2410_GPG9_EINT17   (0x02 << 18)
-
-#define S3C2410_GPG10_EINT18  (0x02 << 20)
-
-#define S3C2410_GPG11_EINT19  (0x02 << 22)
-#define S3C2410_GPG11_TCLK1   (0x03 << 22)
-#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
-
-#define S3C2410_GPG12_EINT20  (0x02 << 24)
-#define S3C2410_GPG12_XMON    (0x03 << 24)
-#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
-#define S3C2443_GPG12_nINPACK (0x03 << 24)
-
-#define S3C2410_GPG13_EINT21  (0x02 << 26)
-#define S3C2410_GPG13_nXPON   (0x03 << 26)
-#define S3C2443_GPG13_CF_nREG (0x03 << 26)
-
-#define S3C2410_GPG14_EINT22  (0x02 << 28)
-#define S3C2410_GPG14_YMON    (0x03 << 28)
-#define S3C2443_GPG14_CF_RESET (0x03 << 28)
-
-#define S3C2410_GPG15_EINT23  (0x02 << 30)
-#define S3C2410_GPG15_nYPON   (0x03 << 30)
-#define S3C2443_GPG15_CF_PWR  (0x03 << 30)
-
-#define S3C2410_GPG_PUPDIS(x)  (1<<(x))
-
-/* Port H consists of11 GPIO/serial/Misc pins
- *
- * GPHCON has 2 bits for each of the input pins on port H
- *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
- *
- * pull up works like all other ports.
-*/
-
-#define S3C2410_GPHCON	   S3C2410_GPIOREG(0x70)
-#define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
-#define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
-
-#define S3C2410_GPH0_nCTS0  (0x02 << 0)
-#define S3C2416_GPH0_TXD0  (0x02 << 0)
-
-#define S3C2410_GPH1_nRTS0  (0x02 << 2)
-#define S3C2416_GPH1_RXD0  (0x02 << 2)
-
-#define S3C2410_GPH2_TXD0   (0x02 << 4)
-#define S3C2416_GPH2_TXD1   (0x02 << 4)
-
-#define S3C2410_GPH3_RXD0   (0x02 << 6)
-#define S3C2416_GPH3_RXD1   (0x02 << 6)
-
-#define S3C2410_GPH4_TXD1   (0x02 << 8)
-#define S3C2416_GPH4_TXD2   (0x02 << 8)
-
-#define S3C2410_GPH5_RXD1   (0x02 << 10)
-#define S3C2416_GPH5_RXD2   (0x02 << 10)
-
-#define S3C2410_GPH6_TXD2   (0x02 << 12)
-#define S3C2416_GPH6_TXD3   (0x02 << 12)
-#define S3C2410_GPH6_nRTS1  (0x03 << 12)
-#define S3C2416_GPH6_nRTS2  (0x03 << 12)
-
-#define S3C2410_GPH7_RXD2   (0x02 << 14)
-#define S3C2416_GPH7_RXD3   (0x02 << 14)
-#define S3C2410_GPH7_nCTS1  (0x03 << 14)
-#define S3C2416_GPH7_nCTS2  (0x03 << 14)
-
-#define S3C2410_GPH8_UCLK   (0x02 << 16)
-#define S3C2416_GPH8_nCTS0  (0x02 << 16)
-
-#define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
-#define S3C2442_GPH9_nSPICS0  (0x03 << 18)
-#define S3C2416_GPH9_nRTS0    (0x02 << 18)
-
-#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
-#define S3C2416_GPH10_nCTS1   (0x02 << 20)
-
-#define S3C2416_GPH11_nRTS1   (0x02 << 22)
-
-#define S3C2416_GPH12_EXTUARTCLK (0x02 << 24)
-
-#define S3C2416_GPH13_CLKOUT0 (0x02 << 26)
-
-#define S3C2416_GPH14_CLKOUT1 (0x02 << 28)
-
-/* The S3C2412 and S3C2413 move the GPJ register set to after
- * GPH, which means all registers after 0x80 are now offset by 0x10
- * for the 2412/2413 from the 2410/2440/2442
-*/
-
-/*
- * Port J consists of 13 GPIO/Camera pins. GPJCON has 2 bits
- * for each of the pins on port J.
- *   00 - input, 01 output, 10 - camera
- *
- * Pull up works like all other ports.
- */
-
-#define S3C2413_GPJCON	   S3C2410_GPIOREG(0x80)
-#define S3C2413_GPJDAT	   S3C2410_GPIOREG(0x84)
-#define S3C2413_GPJUP	   S3C2410_GPIOREG(0x88)
-#define S3C2413_GPJSLPCON  S3C2410_GPIOREG(0x8C)
-
-/* S3C2443 and above */
-#define S3C2440_GPJCON	   S3C2410_GPIOREG(0xD0)
-#define S3C2440_GPJDAT	   S3C2410_GPIOREG(0xD4)
-#define S3C2440_GPJUP	   S3C2410_GPIOREG(0xD8)
-
-#define S3C2443_GPKCON	   S3C2410_GPIOREG(0xE0)
-#define S3C2443_GPKDAT	   S3C2410_GPIOREG(0xE4)
-#define S3C2443_GPKUP	   S3C2410_GPIOREG(0xE8)
-
-#define S3C2443_GPLCON	   S3C2410_GPIOREG(0xF0)
-#define S3C2443_GPLDAT	   S3C2410_GPIOREG(0xF4)
-#define S3C2443_GPLUP	   S3C2410_GPIOREG(0xF8)
-
-#define S3C2443_GPMCON	   S3C2410_GPIOREG(0x100)
-#define S3C2443_GPMDAT	   S3C2410_GPIOREG(0x104)
-#define S3C2443_GPMUP	   S3C2410_GPIOREG(0x108)
-
-/* miscellaneous control */
-#define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
-
-/* see clock.h for dclk definitions */
-
-/* pullup control on databus */
-#define S3C2410_MISCCR_SPUCR_HEN    (0<<0)
-#define S3C2410_MISCCR_SPUCR_HDIS   (1<<0)
-#define S3C2410_MISCCR_SPUCR_LEN    (0<<1)
-#define S3C2410_MISCCR_SPUCR_LDIS   (1<<1)
-
-#define S3C2410_MISCCR_USBDEV	    (0<<3)
-#define S3C2410_MISCCR_USBHOST	    (1<<3)
-
-#define S3C2410_MISCCR_CLK0_MPLL    (0<<4)
-#define S3C2410_MISCCR_CLK0_UPLL    (1<<4)
-#define S3C2410_MISCCR_CLK0_FCLK    (2<<4)
-#define S3C2410_MISCCR_CLK0_HCLK    (3<<4)
-#define S3C2410_MISCCR_CLK0_PCLK    (4<<4)
-#define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
-#define S3C2410_MISCCR_CLK0_MASK    (7<<4)
-
-#define S3C2412_MISCCR_CLK0_RTC	    (2<<4)
-
-#define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
-#define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
-#define S3C2410_MISCCR_CLK1_FCLK    (2<<8)
-#define S3C2410_MISCCR_CLK1_HCLK    (3<<8)
-#define S3C2410_MISCCR_CLK1_PCLK    (4<<8)
-#define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
-#define S3C2410_MISCCR_CLK1_MASK    (7<<8)
-
-#define S3C2412_MISCCR_CLK1_CLKsrc  (0<<8)
-
-#define S3C2410_MISCCR_USBSUSPND0   (1<<12)
-#define S3C2416_MISCCR_SEL_SUSPND   (1<<12)
-#define S3C2410_MISCCR_USBSUSPND1   (1<<13)
-
-#define S3C2410_MISCCR_nRSTCON	    (1<<16)
-
-#define S3C2410_MISCCR_nEN_SCLK0    (1<<17)
-#define S3C2410_MISCCR_nEN_SCLK1    (1<<18)
-#define S3C2410_MISCCR_nEN_SCLKE    (1<<19)	/* not 2412 */
-#define S3C2410_MISCCR_SDSLEEP	    (7<<17)
-
-#define S3C2416_MISCCR_FLT_I2C      (1<<24)
-#define S3C2416_MISCCR_HSSPI_EN2    (1<<31)
-
-/* external interrupt control... */
-/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
- * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
- * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
- *
- * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
- *
- * Samsung datasheet p9-25
-*/
-#define S3C2410_EXTINT0	   S3C2410_GPIOREG(0x88)
-#define S3C2410_EXTINT1	   S3C2410_GPIOREG(0x8C)
-#define S3C2410_EXTINT2	   S3C2410_GPIOREG(0x90)
-
-#define S3C24XX_EXTINT0	   S3C24XX_GPIOREG2(0x88)
-#define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
-#define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
-
-/* interrupt filtering control for EINT16..EINT23 */
-#define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
-#define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
-#define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)
-#define S3C2410_EINFLT3	   S3C2410_GPIOREG(0xA0)
-
-#define S3C24XX_EINFLT0	   S3C24XX_GPIOREG2(0x94)
-#define S3C24XX_EINFLT1	   S3C24XX_GPIOREG2(0x98)
-#define S3C24XX_EINFLT2	   S3C24XX_GPIOREG2(0x9C)
-#define S3C24XX_EINFLT3	   S3C24XX_GPIOREG2(0xA0)
-
-/* values for interrupt filtering */
-#define S3C2410_EINTFLT_PCLK		(0x00)
-#define S3C2410_EINTFLT_EXTCLK		(1<<7)
-#define S3C2410_EINTFLT_WIDTHMSK(x)	((x) & 0x3f)
-
-/* removed EINTxxxx defs from here, not meant for this */
-
-/* GSTATUS have miscellaneous information in them
- *
- * These move between s3c2410 and s3c2412 style systems.
- */
-
-#define S3C2410_GSTATUS0   S3C2410_GPIOREG(0x0AC)
-#define S3C2410_GSTATUS1   S3C2410_GPIOREG(0x0B0)
-#define S3C2410_GSTATUS2   S3C2410_GPIOREG(0x0B4)
-#define S3C2410_GSTATUS3   S3C2410_GPIOREG(0x0B8)
-#define S3C2410_GSTATUS4   S3C2410_GPIOREG(0x0BC)
-
-#define S3C2412_GSTATUS0   S3C2410_GPIOREG(0x0BC)
-#define S3C2412_GSTATUS1   S3C2410_GPIOREG(0x0C0)
-#define S3C2412_GSTATUS2   S3C2410_GPIOREG(0x0C4)
-#define S3C2412_GSTATUS3   S3C2410_GPIOREG(0x0C8)
-#define S3C2412_GSTATUS4   S3C2410_GPIOREG(0x0CC)
-
-#define S3C24XX_GSTATUS0   S3C24XX_GPIOREG2(0x0AC)
-#define S3C24XX_GSTATUS1   S3C24XX_GPIOREG2(0x0B0)
-#define S3C24XX_GSTATUS2   S3C24XX_GPIOREG2(0x0B4)
-#define S3C24XX_GSTATUS3   S3C24XX_GPIOREG2(0x0B8)
-#define S3C24XX_GSTATUS4   S3C24XX_GPIOREG2(0x0BC)
-
-#define S3C2410_GSTATUS0_nWAIT	   (1<<3)
-#define S3C2410_GSTATUS0_NCON	   (1<<2)
-#define S3C2410_GSTATUS0_RnB	   (1<<1)
-#define S3C2410_GSTATUS0_nBATTFLT  (1<<0)
-
-#define S3C2410_GSTATUS1_IDMASK	   (0xffff0000)
-#define S3C2410_GSTATUS1_2410	   (0x32410000)
-#define S3C2410_GSTATUS1_2412	   (0x32412001)
-#define S3C2410_GSTATUS1_2416	   (0x32416003)
-#define S3C2410_GSTATUS1_2440	   (0x32440000)
-#define S3C2410_GSTATUS1_2442	   (0x32440aaa)
-/* some 2416 CPUs report this value also */
-#define S3C2410_GSTATUS1_2450	   (0x32450003)
-
-#define S3C2410_GSTATUS2_WTRESET   (1<<2)
-#define S3C2410_GSTATUS2_OFFRESET  (1<<1)
-#define S3C2410_GSTATUS2_PONRESET  (1<<0)
-
-/* 2412/2413 sleep configuration registers */
-
-#define S3C2412_GPBSLPCON	S3C2410_GPIOREG(0x1C)
-#define S3C2412_GPCSLPCON	S3C2410_GPIOREG(0x2C)
-#define S3C2412_GPDSLPCON	S3C2410_GPIOREG(0x3C)
-#define S3C2412_GPFSLPCON	S3C2410_GPIOREG(0x5C)
-#define S3C2412_GPGSLPCON	S3C2410_GPIOREG(0x6C)
-#define S3C2412_GPHSLPCON	S3C2410_GPIOREG(0x7C)
-
-/* definitions for each pin bit */
-#define S3C2412_GPIO_SLPCON_LOW	 ( 0x00 )
-#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
-#define S3C2412_GPIO_SLPCON_IN   ( 0x02 )
-#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
-
-#define S3C2412_SLPCON_LOW(x)	( 0x00 << ((x) * 2))
-#define S3C2412_SLPCON_HIGH(x)	( 0x01 << ((x) * 2))
-#define S3C2412_SLPCON_IN(x)	( 0x02 << ((x) * 2))
-#define S3C2412_SLPCON_PULL(x)	( 0x03 << ((x) * 2))
-#define S3C2412_SLPCON_EINT(x)	( 0x02 << ((x) * 2))  /* only IRQ pins */
-#define S3C2412_SLPCON_MASK(x)	( 0x03 << ((x) * 2))
-
-#define S3C2412_SLPCON_ALL_LOW	(0x0)
-#define S3C2412_SLPCON_ALL_HIGH	(0x11111111 | 0x44444444)
-#define S3C2412_SLPCON_ALL_IN  	(0x22222222 | 0x88888888)
-#define S3C2412_SLPCON_ALL_PULL	(0x33333333)
-
-#endif	/* __ASM_ARCH_REGS_GPIO_H */
-
diff --git a/arch/arm/mach-s3c/regs-gpio.h b/arch/arm/mach-s3c/regs-gpio.h
index 0d41cb76d440..4e08e8609663 100644
--- a/arch/arm/mach-s3c/regs-gpio.h
+++ b/arch/arm/mach-s3c/regs-gpio.h
@@ -1,9 +1,2 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "regs-gpio-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
 #include "regs-gpio-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/regs-irq-s3c24xx.h b/arch/arm/mach-s3c/regs-irq-s3c24xx.h
deleted file mode 100644
index c0b97b203415..000000000000
--- a/arch/arm/mach-s3c/regs-irq-s3c24xx.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- */
-
-
-#ifndef ___ASM_ARCH_REGS_IRQ_H
-#define ___ASM_ARCH_REGS_IRQ_H
-
-#include "map-s3c.h"
-
-/* interrupt controller */
-
-#define S3C2410_IRQREG(x)   ((x) + S3C24XX_VA_IRQ)
-#define S3C2410_EINTREG(x)  ((x) + S3C24XX_VA_GPIO)
-#define S3C24XX_EINTREG(x)  ((x) + S3C24XX_VA_GPIO2)
-
-#define S3C2410_SRCPND	       S3C2410_IRQREG(0x000)
-#define S3C2410_INTMOD	       S3C2410_IRQREG(0x004)
-#define S3C2410_INTMSK	       S3C2410_IRQREG(0x008)
-#define S3C2410_PRIORITY       S3C2410_IRQREG(0x00C)
-#define S3C2410_INTPND	       S3C2410_IRQREG(0x010)
-#define S3C2410_INTOFFSET      S3C2410_IRQREG(0x014)
-#define S3C2410_SUBSRCPND      S3C2410_IRQREG(0x018)
-#define S3C2410_INTSUBMSK      S3C2410_IRQREG(0x01C)
-
-#define S3C2416_PRIORITY_MODE1		S3C2410_IRQREG(0x030)
-#define S3C2416_PRIORITY_UPDATE1	S3C2410_IRQREG(0x034)
-#define S3C2416_SRCPND2			S3C2410_IRQREG(0x040)
-#define S3C2416_INTMOD2			S3C2410_IRQREG(0x044)
-#define S3C2416_INTMSK2			S3C2410_IRQREG(0x048)
-#define S3C2416_INTPND2			S3C2410_IRQREG(0x050)
-#define S3C2416_INTOFFSET2		S3C2410_IRQREG(0x054)
-#define S3C2416_PRIORITY_MODE2		S3C2410_IRQREG(0x070)
-#define S3C2416_PRIORITY_UPDATE2	S3C2410_IRQREG(0x074)
-
-/* mask: 0=enable, 1=disable
- * 1 bit EINT, 4=EINT4, 23=EINT23
- * EINT0,1,2,3 are not handled here.
-*/
-
-#define S3C2410_EINTMASK       S3C2410_EINTREG(0x0A4)
-#define S3C2410_EINTPEND       S3C2410_EINTREG(0X0A8)
-#define S3C2412_EINTMASK       S3C2410_EINTREG(0x0B4)
-#define S3C2412_EINTPEND       S3C2410_EINTREG(0X0B8)
-
-#define S3C24XX_EINTMASK       S3C24XX_EINTREG(0x0A4)
-#define S3C24XX_EINTPEND       S3C24XX_EINTREG(0X0A8)
-
-#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s3c/regs-irq.h b/arch/arm/mach-s3c/regs-irq.h
index 57f0dda8dbf5..4243daa54bd1 100644
--- a/arch/arm/mach-s3c/regs-irq.h
+++ b/arch/arm/mach-s3c/regs-irq.h
@@ -1,9 +1,2 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "regs-irq-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
 #include "regs-irq-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/regs-mem-s3c24xx.h b/arch/arm/mach-s3c/regs-mem-s3c24xx.h
deleted file mode 100644
index 8fed34a1672a..000000000000
--- a/arch/arm/mach-s3c/regs-mem-s3c24xx.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * S3C2410 Memory Control register definitions
- */
-
-#ifndef __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H
-#define __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H __FILE__
-
-#include "map-s3c.h"
-
-#define S3C2410_MEMREG(x)		(S3C24XX_VA_MEMCTRL + (x))
-
-#define S3C2410_BWSCON			S3C2410_MEMREG(0x00)
-#define S3C2410_BANKCON0		S3C2410_MEMREG(0x04)
-#define S3C2410_BANKCON1		S3C2410_MEMREG(0x08)
-#define S3C2410_BANKCON2		S3C2410_MEMREG(0x0C)
-#define S3C2410_BANKCON3		S3C2410_MEMREG(0x10)
-#define S3C2410_BANKCON4		S3C2410_MEMREG(0x14)
-#define S3C2410_BANKCON5		S3C2410_MEMREG(0x18)
-#define S3C2410_BANKCON6		S3C2410_MEMREG(0x1C)
-#define S3C2410_BANKCON7		S3C2410_MEMREG(0x20)
-#define S3C2410_REFRESH			S3C2410_MEMREG(0x24)
-#define S3C2410_BANKSIZE		S3C2410_MEMREG(0x28)
-
-#define S3C2410_BWSCON_ST1		(1 << 7)
-#define S3C2410_BWSCON_ST2		(1 << 11)
-#define S3C2410_BWSCON_ST3		(1 << 15)
-#define S3C2410_BWSCON_ST4		(1 << 19)
-#define S3C2410_BWSCON_ST5		(1 << 23)
-
-#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
-
-#define S3C2410_BWSCON_WS		(1 << 2)
-
-#define S3C2410_BANKCON_PMC16		(0x3)
-
-#define S3C2410_BANKCON_Tacp_SHIFT	(2)
-#define S3C2410_BANKCON_Tcah_SHIFT	(4)
-#define S3C2410_BANKCON_Tcoh_SHIFT	(6)
-#define S3C2410_BANKCON_Tacc_SHIFT	(8)
-#define S3C2410_BANKCON_Tcos_SHIFT	(11)
-#define S3C2410_BANKCON_Tacs_SHIFT	(13)
-
-#define S3C2410_BANKCON_SDRAM		(0x3 << 15)
-
-#define S3C2410_REFRESH_SELF		(1 << 22)
-
-#define S3C2410_BANKSIZE_MASK		(0x7 << 0)
-
-#endif /* __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H */
diff --git a/arch/arm/mach-s3c/regs-s3c2443-clock.h b/arch/arm/mach-s3c/regs-s3c2443-clock.h
deleted file mode 100644
index b3b670d463db..000000000000
--- a/arch/arm/mach-s3c/regs-s3c2443-clock.h
+++ /dev/null
@@ -1,238 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C2443 clock register definitions
- */
-
-#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
-#define __ASM_ARM_REGS_S3C2443_CLOCK
-
-#include <linux/delay.h>
-#include "map-s3c.h"
-
-#define S3C2443_CLKREG(x)		((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2443_PLLCON_MDIVSHIFT	16
-#define S3C2443_PLLCON_PDIVSHIFT	8
-#define S3C2443_PLLCON_SDIVSHIFT	0
-#define S3C2443_PLLCON_MDIVMASK		((1<<(1+(23-16)))-1)
-#define S3C2443_PLLCON_PDIVMASK		((1<<(1+(9-8)))-1)
-#define S3C2443_PLLCON_SDIVMASK		(3)
-
-#define S3C2443_MPLLCON			S3C2443_CLKREG(0x10)
-#define S3C2443_EPLLCON			S3C2443_CLKREG(0x18)
-#define S3C2443_CLKSRC			S3C2443_CLKREG(0x20)
-#define S3C2443_CLKDIV0			S3C2443_CLKREG(0x24)
-#define S3C2443_CLKDIV1			S3C2443_CLKREG(0x28)
-#define S3C2443_HCLKCON			S3C2443_CLKREG(0x30)
-#define S3C2443_PCLKCON			S3C2443_CLKREG(0x34)
-#define S3C2443_SCLKCON			S3C2443_CLKREG(0x38)
-#define S3C2443_PWRMODE			S3C2443_CLKREG(0x40)
-#define S3C2443_SWRST			S3C2443_CLKREG(0x44)
-#define S3C2443_BUSPRI0			S3C2443_CLKREG(0x50)
-#define S3C2443_SYSID			S3C2443_CLKREG(0x5C)
-#define S3C2443_PWRCFG			S3C2443_CLKREG(0x60)
-#define S3C2443_RSTCON			S3C2443_CLKREG(0x64)
-#define S3C2443_PHYCTRL			S3C2443_CLKREG(0x80)
-#define S3C2443_PHYPWR			S3C2443_CLKREG(0x84)
-#define S3C2443_URSTCON			S3C2443_CLKREG(0x88)
-#define S3C2443_UCLKCON			S3C2443_CLKREG(0x8C)
-
-#define S3C2443_PLLCON_OFF		(1<<24)
-
-#define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<7)
-#define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<7)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<7)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<7)
-#define S3C2443_CLKSRC_EPLLREF_MASK	(3<<7)
-
-#define S3C2443_CLKSRC_EXTCLK_DIV	(1<<3)
-
-#define S3C2443_CLKDIV0_HALF_HCLK	(1<<3)
-#define S3C2443_CLKDIV0_HALF_PCLK	(1<<2)
-
-#define S3C2443_CLKDIV0_HCLKDIV_MASK	(3<<0)
-
-#define S3C2443_CLKDIV0_EXTDIV_MASK	(3<<6)
-#define S3C2443_CLKDIV0_EXTDIV_SHIFT	(6)
-
-#define S3C2443_CLKDIV0_PREDIV_MASK	(3<<4)
-#define S3C2443_CLKDIV0_PREDIV_SHIFT	(4)
-
-#define S3C2416_CLKDIV0_ARMDIV_MASK	(7 << 9)
-#define S3C2443_CLKDIV0_ARMDIV_MASK	(15<<9)
-#define S3C2443_CLKDIV0_ARMDIV_SHIFT	(9)
-#define S3C2443_CLKDIV0_ARMDIV_1	(0<<9)
-#define S3C2443_CLKDIV0_ARMDIV_2	(8<<9)
-#define S3C2443_CLKDIV0_ARMDIV_3	(2<<9)
-#define S3C2443_CLKDIV0_ARMDIV_4	(9<<9)
-#define S3C2443_CLKDIV0_ARMDIV_6	(10<<9)
-#define S3C2443_CLKDIV0_ARMDIV_8	(11<<9)
-#define S3C2443_CLKDIV0_ARMDIV_12	(13<<9)
-#define S3C2443_CLKDIV0_ARMDIV_16	(15<<9)
-
-/* S3C2443_CLKDIV1 removed, only used in clock.c code */
-
-#define S3C2443_CLKCON_NAND
-
-#define S3C2443_HCLKCON_DMA0		(1<<0)
-#define S3C2443_HCLKCON_DMA1		(1<<1)
-#define S3C2443_HCLKCON_DMA2		(1<<2)
-#define S3C2443_HCLKCON_DMA3		(1<<3)
-#define S3C2443_HCLKCON_DMA4		(1<<4)
-#define S3C2443_HCLKCON_DMA5		(1<<5)
-#define S3C2443_HCLKCON_CAMIF		(1<<8)
-#define S3C2443_HCLKCON_LCDC		(1<<9)
-#define S3C2443_HCLKCON_USBH		(1<<11)
-#define S3C2443_HCLKCON_USBD		(1<<12)
-#define S3C2416_HCLKCON_HSMMC0		(1<<15)
-#define S3C2443_HCLKCON_HSMMC		(1<<16)
-#define S3C2443_HCLKCON_CFC		(1<<17)
-#define S3C2443_HCLKCON_SSMC		(1<<18)
-#define S3C2443_HCLKCON_DRAMC		(1<<19)
-
-#define S3C2443_PCLKCON_UART0		(1<<0)
-#define S3C2443_PCLKCON_UART1		(1<<1)
-#define S3C2443_PCLKCON_UART2		(1<<2)
-#define S3C2443_PCLKCON_UART3		(1<<3)
-#define S3C2443_PCLKCON_IIC		(1<<4)
-#define S3C2443_PCLKCON_SDI		(1<<5)
-#define S3C2443_PCLKCON_HSSPI		(1<<6)
-#define S3C2443_PCLKCON_ADC		(1<<7)
-#define S3C2443_PCLKCON_AC97		(1<<8)
-#define S3C2443_PCLKCON_IIS		(1<<9)
-#define S3C2443_PCLKCON_PWMT		(1<<10)
-#define S3C2443_PCLKCON_WDT		(1<<11)
-#define S3C2443_PCLKCON_RTC		(1<<12)
-#define S3C2443_PCLKCON_GPIO		(1<<13)
-#define S3C2443_PCLKCON_SPI0		(1<<14)
-#define S3C2443_PCLKCON_SPI1		(1<<15)
-
-#define S3C2443_SCLKCON_DDRCLK		(1<<16)
-#define S3C2443_SCLKCON_SSMCCLK		(1<<15)
-#define S3C2443_SCLKCON_HSSPICLK	(1<<14)
-#define S3C2443_SCLKCON_HSMMCCLK_EXT	(1<<13)
-#define S3C2443_SCLKCON_HSMMCCLK_EPLL	(1<<12)
-#define S3C2443_SCLKCON_CAMCLK		(1<<11)
-#define S3C2443_SCLKCON_DISPCLK		(1<<10)
-#define S3C2443_SCLKCON_I2SCLK		(1<<9)
-#define S3C2443_SCLKCON_UARTCLK		(1<<8)
-#define S3C2443_SCLKCON_USBHOST		(1<<1)
-
-#define S3C2443_PWRCFG_SLEEP		(1<<15)
-
-#define S3C2443_PWRCFG_USBPHY		(1 << 4)
-
-#define S3C2443_URSTCON_FUNCRST		(1 << 2)
-#define S3C2443_URSTCON_PHYRST		(1 << 0)
-
-#define S3C2443_PHYCTRL_CLKSEL		(1 << 3)
-#define S3C2443_PHYCTRL_EXTCLK		(1 << 2)
-#define S3C2443_PHYCTRL_PLLSEL		(1 << 1)
-#define S3C2443_PHYCTRL_DSPORT		(1 << 0)
-
-#define S3C2443_PHYPWR_COMMON_ON	(1 << 31)
-#define S3C2443_PHYPWR_ANALOG_PD	(1 << 4)
-#define S3C2443_PHYPWR_PLL_REFCLK	(1 << 3)
-#define S3C2443_PHYPWR_XO_ON		(1 << 2)
-#define S3C2443_PHYPWR_PLL_PWRDN	(1 << 1)
-#define S3C2443_PHYPWR_FSUSPEND		(1 << 0)
-
-#define S3C2443_UCLKCON_DETECT_VBUS	(1 << 31)
-#define S3C2443_UCLKCON_FUNC_CLKEN	(1 << 2)
-#define S3C2443_UCLKCON_TCLKEN		(1 << 0)
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
-	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
-	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
-
-	mdiv &= S3C2443_PLLCON_MDIVMASK;
-	pdiv &= S3C2443_PLLCON_PDIVMASK;
-	sdiv &= S3C2443_PLLCON_SDIVMASK;
-
-	fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
-	do_div(fvco, pdiv << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-static inline unsigned int
-s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
-	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
-	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
-
-	mdiv &= S3C2443_PLLCON_MDIVMASK;
-	pdiv &= S3C2443_PLLCON_PDIVMASK;
-	sdiv &= S3C2443_PLLCON_SDIVMASK;
-
-	fvco = (uint64_t)baseclk * (mdiv + 8);
-	do_div(fvco, (pdiv + 2) << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-static inline void s3c_hsudc_init_phy(void)
-{
-	u32 cfg;
-
-	cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;
-	writel(cfg, S3C2443_PWRCFG);
-
-	cfg = readl(S3C2443_URSTCON);
-	cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
-	writel(cfg, S3C2443_URSTCON);
-	mdelay(1);
-
-	cfg = readl(S3C2443_URSTCON);
-	cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
-	writel(cfg, S3C2443_URSTCON);
-
-	cfg = readl(S3C2443_PHYCTRL);
-	cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);
-	cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);
-	writel(cfg, S3C2443_PHYCTRL);
-
-	cfg = readl(S3C2443_PHYPWR);
-	cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |
-		S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |
-		S3C2443_PHYPWR_ANALOG_PD);
-	cfg |= S3C2443_PHYPWR_COMMON_ON;
-	writel(cfg, S3C2443_PHYPWR);
-
-	cfg = readl(S3C2443_UCLKCON);
-	cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |
-		S3C2443_UCLKCON_TCLKEN);
-	writel(cfg, S3C2443_UCLKCON);
-}
-
-static inline void s3c_hsudc_uninit_phy(void)
-{
-	u32 cfg;
-
-	cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;
-	writel(cfg, S3C2443_PWRCFG);
-
-	writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);
-
-	cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;
-	writel(cfg, S3C2443_UCLKCON);
-}
-
-#endif /*  __ASM_ARM_REGS_S3C2443_CLOCK */
-
diff --git a/arch/arm/mach-s3c/regs-srom-s3c64xx.h b/arch/arm/mach-s3c/regs-srom-s3c64xx.h
deleted file mode 100644
index 2b37988bdf94..000000000000
--- a/arch/arm/mach-s3c/regs-srom-s3c64xx.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2009 Andy Green <andy@warmcat.com>
- *
- * S3C64XX SROM definitions
- */
-
-#ifndef __MACH_S3C64XX_REGS_SROM_H
-#define __MACH_S3C64XX_REGS_SROM_H __FILE__
-
-#define S3C64XX_SROMREG(x)	(S3C_VA_MEM + (x))
-
-#define S3C64XX_SROM_BW		S3C64XX_SROMREG(0)
-#define S3C64XX_SROM_BC0	S3C64XX_SROMREG(4)
-#define S3C64XX_SROM_BC1	S3C64XX_SROMREG(8)
-#define S3C64XX_SROM_BC2	S3C64XX_SROMREG(0xc)
-#define S3C64XX_SROM_BC3	S3C64XX_SROMREG(0x10)
-#define S3C64XX_SROM_BC4	S3C64XX_SROMREG(0x14)
-#define S3C64XX_SROM_BC5	S3C64XX_SROMREG(0x18)
-
-/*
- * one register BW holds 5 x 4-bit packed settings for NCS0 - NCS4
- */
-
-#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT	0
-#define S3C64XX_SROM_BW__WAITENABLE__SHIFT	2
-#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT	3
-#define S3C64XX_SROM_BW__CS_MASK		0xf
-
-#define S3C64XX_SROM_BW__NCS0__SHIFT	0
-#define S3C64XX_SROM_BW__NCS1__SHIFT	4
-#define S3C64XX_SROM_BW__NCS2__SHIFT	8
-#define S3C64XX_SROM_BW__NCS3__SHIFT	0xc
-#define S3C64XX_SROM_BW__NCS4__SHIFT	0x10
-
-/*
- * applies to same to BCS0 - BCS4
- */
-
-#define S3C64XX_SROM_BCX__PMC__SHIFT	0
-#define S3C64XX_SROM_BCX__PMC__MASK	3
-#define S3C64XX_SROM_BCX__TACP__SHIFT	4
-#define S3C64XX_SROM_BCX__TACP__MASK	0xf
-#define S3C64XX_SROM_BCX__TCAH__SHIFT	8
-#define S3C64XX_SROM_BCX__TCAH__MASK	0xf
-#define S3C64XX_SROM_BCX__TCOH__SHIFT	12
-#define S3C64XX_SROM_BCX__TCOH__MASK	0xf
-#define S3C64XX_SROM_BCX__TACC__SHIFT	16
-#define S3C64XX_SROM_BCX__TACC__MASK	0x1f
-#define S3C64XX_SROM_BCX__TCOS__SHIFT	24
-#define S3C64XX_SROM_BCX__TCOS__MASK	0xf
-#define S3C64XX_SROM_BCX__TACS__SHIFT	28
-#define S3C64XX_SROM_BCX__TACS__MASK	0xf
-
-#endif /* __MACH_S3C64XX_REGS_SROM_H */
diff --git a/arch/arm/mach-s3c/rtc-core-s3c24xx.h b/arch/arm/mach-s3c/rtc-core-s3c24xx.h
deleted file mode 100644
index e7258b2423fc..000000000000
--- a/arch/arm/mach-s3c/rtc-core-s3c24xx.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
- *
- * Samsung RTC Controller core functions
- */
-
-#ifndef __RTC_CORE_S3C24XX_H
-#define __RTC_CORE_S3C24XX_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-extern struct platform_device s3c_device_rtc;
-
-/* re-define device name depending on support. */
-static inline void s3c_rtc_setname(char *name)
-{
-	s3c_device_rtc.name = name;
-}
-
-#endif /* __RTC_CORE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c/s3c2410.c b/arch/arm/mach-s3c/s3c2410.c
deleted file mode 100644
index 4d39d9939c2f..000000000000
--- a/arch/arm/mach-s3c/s3c2410.c
+++ /dev/null
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2003-2005 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.simtec.co.uk/products/EB2410ITX/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "map.h"
-#include "gpio-samsung.h"
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-
-#include "regs-clock.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "pm.h"
-
-#include "gpio-core.h"
-#include "gpio-cfg.h"
-#include "gpio-cfg-helpers.h"
-
-#include "s3c24xx.h"
-
-/* Initial IO mappings */
-
-static struct map_desc s3c2410_iodesc[] __initdata __maybe_unused = {
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(WATCHDOG),
-};
-
-/* our uart devices */
-
-/* uart registration process */
-
-void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2410-uart", s3c2410_uart_resources, cfg, no);
-}
-
-/* s3c2410_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
-*/
-
-void __init s3c2410_map_io(void)
-{
-	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
-
-	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
-}
-
-struct bus_type s3c2410_subsys = {
-	.name = "s3c2410-core",
-	.dev_name = "s3c2410-core",
-};
-
-/* Note, we would have liked to name this s3c2410-core, but we cannot
- * register two subsystems with the same name.
- */
-struct bus_type s3c2410a_subsys = {
-	.name = "s3c2410a-core",
-	.dev_name = "s3c2410a-core",
-};
-
-static struct device s3c2410_dev = {
-	.bus		= &s3c2410_subsys,
-};
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2410 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-static int __init s3c2410_core_init(void)
-{
-	return subsys_system_register(&s3c2410_subsys, NULL);
-}
-
-core_initcall(s3c2410_core_init);
-
-static int __init s3c2410a_core_init(void)
-{
-	return subsys_system_register(&s3c2410a_subsys, NULL);
-}
-
-core_initcall(s3c2410a_core_init);
-
-int __init s3c2410_init(void)
-{
-	printk("S3C2410: Initialising architecture\n");
-
-#ifdef CONFIG_PM_SLEEP
-	register_syscore_ops(&s3c2410_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-#endif
-
-	return device_register(&s3c2410_dev);
-}
-
-int __init s3c2410a_init(void)
-{
-	s3c2410_dev.bus = &s3c2410a_subsys;
-	return s3c2410_init();
-}
diff --git a/arch/arm/mach-s3c/s3c2412-power.h b/arch/arm/mach-s3c/s3c2412-power.h
deleted file mode 100644
index 0031cfaa1d76..000000000000
--- a/arch/arm/mach-s3c/s3c2412-power.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- */
-
-#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H
-#define __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H __FILE__
-
-#define S3C24XX_PWRREG(x)			((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2412_PWRMODECON			S3C24XX_PWRREG(0x20)
-#define S3C2412_PWRCFG				S3C24XX_PWRREG(0x24)
-
-#define S3C2412_INFORM0				S3C24XX_PWRREG(0x70)
-#define S3C2412_INFORM1				S3C24XX_PWRREG(0x74)
-#define S3C2412_INFORM2				S3C24XX_PWRREG(0x78)
-#define S3C2412_INFORM3				S3C24XX_PWRREG(0x7C)
-
-#define S3C2412_PWRCFG_BATF_IRQ			(1 << 0)
-#define S3C2412_PWRCFG_BATF_IGNORE		(2 << 0)
-#define S3C2412_PWRCFG_BATF_SLEEP		(3 << 0)
-#define S3C2412_PWRCFG_BATF_MASK		(3 << 0)
-
-#define S3C2412_PWRCFG_STANDBYWFI_IGNORE	(0 << 6)
-#define S3C2412_PWRCFG_STANDBYWFI_IDLE		(1 << 6)
-#define S3C2412_PWRCFG_STANDBYWFI_STOP		(2 << 6)
-#define S3C2412_PWRCFG_STANDBYWFI_SLEEP		(3 << 6)
-#define S3C2412_PWRCFG_STANDBYWFI_MASK		(3 << 6)
-
-#define S3C2412_PWRCFG_RTC_MASKIRQ		(1 << 8)
-#define S3C2412_PWRCFG_NAND_NORST		(1 << 9)
-
-#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H */
diff --git a/arch/arm/mach-s3c/s3c2412.c b/arch/arm/mach-s3c/s3c2412.c
deleted file mode 100644
index 0b1ca78c9d2a..000000000000
--- a/arch/arm/mach-s3c/s3c2412.c
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// http://armlinux.simtec.co.uk/.
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-#include "map.h"
-#include "regs-clock.h"
-#include "regs-gpio.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "pm.h"
-
-#include "s3c24xx.h"
-#include "nand-core-s3c24xx.h"
-#include "regs-dsc-s3c24xx.h"
-#include "s3c2412-power.h"
-
-#ifndef CONFIG_CPU_S3C2412_ONLY
-void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
-
-static inline void s3c2412_init_gpio2(void)
-{
-	s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
-}
-#else
-#define s3c2412_init_gpio2() do { } while(0)
-#endif
-
-/* Initial IO mappings */
-
-static struct map_desc s3c2412_iodesc[] __initdata __maybe_unused = {
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(WATCHDOG),
-	{
-		.virtual = (unsigned long)S3C2412_VA_SSMC,
-		.pfn	 = __phys_to_pfn(S3C2412_PA_SSMC),
-		.length	 = SZ_1M,
-		.type	 = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)S3C2412_VA_EBI,
-		.pfn	 = __phys_to_pfn(S3C2412_PA_EBI),
-		.length	 = SZ_1M,
-		.type	 = MT_DEVICE,
-	},
-};
-
-/* uart registration process */
-
-void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no);
-
-	/* rename devices that are s3c2412/s3c2413 specific */
-	s3c_device_sdi.name  = "s3c2412-sdi";
-	s3c_device_lcd.name  = "s3c2412-lcd";
-	s3c_nand_setname("s3c2412-nand");
-
-	/* alter IRQ of SDI controller */
-
-	s3c_device_sdi.resource[1].start = IRQ_S3C2412_SDI;
-	s3c_device_sdi.resource[1].end   = IRQ_S3C2412_SDI;
-
-	/* spi channel related changes, s3c2412/13 specific */
-	s3c_device_spi0.name = "s3c2412-spi";
-	s3c_device_spi0.resource[0].end = S3C24XX_PA_SPI + 0x24;
-	s3c_device_spi1.name = "s3c2412-spi";
-	s3c_device_spi1.resource[0].start = S3C24XX_PA_SPI + S3C2412_SPI1;
-	s3c_device_spi1.resource[0].end = S3C24XX_PA_SPI + S3C2412_SPI1 + 0x24;
-
-}
-
-/* s3c2412_idle
- *
- * use the standard idle call by ensuring the idle mode
- * in power config, then issuing the idle co-processor
- * instruction
-*/
-
-static void s3c2412_idle(void)
-{
-	unsigned long tmp;
-
-	/* ensure our idle mode is to go to idle */
-
-	tmp = __raw_readl(S3C2412_PWRCFG);
-	tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
-	tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
-	__raw_writel(tmp, S3C2412_PWRCFG);
-
-	cpu_do_idle();
-}
-
-/* s3c2412_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
-*/
-
-void __init s3c2412_map_io(void)
-{
-	/* move base of IO */
-
-	s3c2412_init_gpio2();
-
-	/* set our idle function */
-
-	arm_pm_idle = s3c2412_idle;
-
-	/* register our io-tables */
-
-	iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
-}
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2412 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-struct bus_type s3c2412_subsys = {
-	.name = "s3c2412-core",
-	.dev_name = "s3c2412-core",
-};
-
-static int __init s3c2412_core_init(void)
-{
-	return subsys_system_register(&s3c2412_subsys, NULL);
-}
-
-core_initcall(s3c2412_core_init);
-
-static struct device s3c2412_dev = {
-	.bus		= &s3c2412_subsys,
-};
-
-int __init s3c2412_init(void)
-{
-	printk("S3C2412: Initialising architecture\n");
-
-#ifdef CONFIG_PM_SLEEP
-	register_syscore_ops(&s3c2412_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-#endif
-
-	return device_register(&s3c2412_dev);
-}
diff --git a/arch/arm/mach-s3c/s3c2412.h b/arch/arm/mach-s3c/s3c2412.h
deleted file mode 100644
index ed09a0e13bd8..000000000000
--- a/arch/arm/mach-s3c/s3c2412.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- */
-
-#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H
-#define __ARCH_ARM_MACH_S3C24XX_S3C2412_H __FILE__
-
-#include "map-s3c.h"
-
-#define S3C2412_MEMREG(x)		(S3C24XX_VA_MEMCTRL + (x))
-#define S3C2412_EBIREG(x)		(S3C2412_VA_EBI + (x))
-
-#define S3C2412_SSMCREG(x)		(S3C2412_VA_SSMC + (x))
-#define S3C2412_SSMC(x, o)		(S3C2412_SSMCREG((x * 0x20) + (o)))
-
-#define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
-
-#define S3C2412_EBI_BANKCFG		S3C2412_EBIREG(0x4)
-
-#define S3C2412_SSMC_BANK(x)		S3C2412_SSMC(x, 0x0)
-
-#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_H */
diff --git a/arch/arm/mach-s3c/s3c2416.c b/arch/arm/mach-s3c/s3c2416.c
deleted file mode 100644
index 126e6ed29713..000000000000
--- a/arch/arm/mach-s3c/s3c2416.c
+++ /dev/null
@@ -1,132 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
-//	as part of OpenInkpot project
-// Copyright (c) 2009 Promwad Innovation Company
-//	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
-//
-// Samsung S3C2416 Mobile CPU support
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "map.h"
-#include "gpio-samsung.h"
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-#include "regs-s3c2443-clock.h"
-#include "rtc-core-s3c24xx.h"
-
-#include "gpio-core.h"
-#include "gpio-cfg.h"
-#include "gpio-cfg-helpers.h"
-#include "devs.h"
-#include "cpu.h"
-#include "sdhci.h"
-#include "pm.h"
-
-#include "iic-core.h"
-#include "adc-core.h"
-
-#include "s3c24xx.h"
-#include "fb-core-s3c24xx.h"
-#include "nand-core-s3c24xx.h"
-#include "spi-core-s3c24xx.h"
-
-static struct map_desc s3c2416_iodesc[] __initdata __maybe_unused = {
-	IODESC_ENT(WATCHDOG),
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-};
-
-struct bus_type s3c2416_subsys = {
-	.name = "s3c2416-core",
-	.dev_name = "s3c2416-core",
-};
-
-static struct device s3c2416_dev = {
-	.bus		= &s3c2416_subsys,
-};
-
-int __init s3c2416_init(void)
-{
-	printk(KERN_INFO "S3C2416: Initializing architecture\n");
-
-	/* change WDT IRQ number */
-	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
-	s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;
-
-	/* the i2c devices are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-	s3c_i2c1_setname("s3c2440-i2c");
-
-	s3c_fb_setname("s3c2443-fb");
-
-	s3c_adc_setname("s3c2416-adc");
-	s3c_rtc_setname("s3c2416-rtc");
-
-#ifdef CONFIG_PM_SLEEP
-	register_syscore_ops(&s3c2416_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-	register_syscore_ops(&s3c2416_irq_syscore_ops);
-#endif
-
-	return device_register(&s3c2416_dev);
-}
-
-void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
-
-	s3c_nand_setname("s3c2412-nand");
-}
-
-/* s3c2416_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
- */
-
-void __init s3c2416_map_io(void)
-{
-	s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown;
-	s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown;
-
-	/* initialize device information early */
-	s3c2416_default_sdhci0();
-	s3c2416_default_sdhci1();
-	s3c24xx_spi_setname("s3c2443-spi");
-
-	iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
-}
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2416 based system)
- * as a driver which may support both 2443 and 2440 may try and use it.
-*/
-
-static int __init s3c2416_core_init(void)
-{
-	return subsys_system_register(&s3c2416_subsys, NULL);
-}
-
-core_initcall(s3c2416_core_init);
diff --git a/arch/arm/mach-s3c/s3c2440.c b/arch/arm/mach-s3c/s3c2440.c
deleted file mode 100644
index c6cdee4987e8..000000000000
--- a/arch/arm/mach-s3c/s3c2440.c
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2004-2006 Simtec Electronics
-//   Ben Dooks <ben@simtec.co.uk>
-//
-// Samsung S3C2440 Mobile CPU support
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
-
-#include "gpio-core.h"
-#include "gpio-cfg.h"
-#include "gpio-cfg-helpers.h"
-#include "gpio-samsung.h"
-
-#include "s3c24xx.h"
-
-static struct device s3c2440_dev = {
-	.bus		= &s3c2440_subsys,
-};
-
-int __init s3c2440_init(void)
-{
-	printk("S3C2440: Initialising architecture\n");
-
-	/* change irq for watchdog */
-
-	s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
-	s3c_device_wdt.resource[1].end   = IRQ_S3C2440_WDT;
-
-	/* register suspend/resume handlers */
-
-#ifdef CONFIG_PM_SLEEP
-	register_syscore_ops(&s3c2410_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-	register_syscore_ops(&s3c244x_pm_syscore_ops);
-#endif
-
-	/* register our system device for everything else */
-
-	return device_register(&s3c2440_dev);
-}
-
-void __init s3c2440_map_io(void)
-{
-	s3c244x_map_io();
-
-	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
-}
diff --git a/arch/arm/mach-s3c/s3c2442.c b/arch/arm/mach-s3c/s3c2442.c
deleted file mode 100644
index 0c0e30b6688f..000000000000
--- a/arch/arm/mach-s3c/s3c2442.c
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2004-2005 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// S3C2442 core and lock support
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include "regs-clock.h"
-
-#include "cpu.h"
-#include "pm.h"
-
-#include "gpio-core.h"
-#include "gpio-cfg.h"
-#include "gpio-cfg-helpers.h"
-#include "gpio-samsung.h"
-
-#include "s3c24xx.h"
-
-static struct device s3c2442_dev = {
-	.bus		= &s3c2442_subsys,
-};
-
-int __init s3c2442_init(void)
-{
-	printk("S3C2442: Initialising architecture\n");
-
-#ifdef CONFIG_PM_SLEEP
-	register_syscore_ops(&s3c2410_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-	register_syscore_ops(&s3c244x_pm_syscore_ops);
-#endif
-
-	return device_register(&s3c2442_dev);
-}
-
-void __init s3c2442_map_io(void)
-{
-	s3c244x_map_io();
-
-	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down;
-	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down;
-}
diff --git a/arch/arm/mach-s3c/s3c2443.c b/arch/arm/mach-s3c/s3c2443.c
deleted file mode 100644
index 05c3c298b9f8..000000000000
--- a/arch/arm/mach-s3c/s3c2443.c
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2007 Simtec Electronics
-//   Ben Dooks <ben@simtec.co.uk>
-//
-// Samsung S3C2443 Mobile CPU support
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "map.h"
-#include "gpio-samsung.h"
-#include "irqs.h"
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-#include "regs-s3c2443-clock.h"
-#include "rtc-core-s3c24xx.h"
-
-#include "gpio-core.h"
-#include "gpio-cfg.h"
-#include "gpio-cfg-helpers.h"
-#include "devs.h"
-#include "cpu.h"
-#include "adc-core.h"
-
-#include "s3c24xx.h"
-#include "fb-core-s3c24xx.h"
-#include "nand-core-s3c24xx.h"
-#include "spi-core-s3c24xx.h"
-
-static struct map_desc s3c2443_iodesc[] __initdata __maybe_unused = {
-	IODESC_ENT(WATCHDOG),
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-};
-
-struct bus_type s3c2443_subsys = {
-	.name = "s3c2443-core",
-	.dev_name = "s3c2443-core",
-};
-
-static struct device s3c2443_dev = {
-	.bus		= &s3c2443_subsys,
-};
-
-int __init s3c2443_init(void)
-{
-	printk("S3C2443: Initialising architecture\n");
-
-	s3c_nand_setname("s3c2412-nand");
-	s3c_fb_setname("s3c2443-fb");
-
-	s3c_adc_setname("s3c2443-adc");
-	s3c_rtc_setname("s3c2443-rtc");
-
-	/* change WDT IRQ number */
-	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
-	s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;
-
-	return device_register(&s3c2443_dev);
-}
-
-void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
-}
-
-/* s3c2443_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
- */
-
-void __init s3c2443_map_io(void)
-{
-	s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
-	s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
-
-	/* initialize device information early */
-	s3c24xx_spi_setname("s3c2443-spi");
-
-	iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
-}
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2443 based system)
- * as a driver which may support both 2443 and 2440 may try and use it.
-*/
-
-static int __init s3c2443_core_init(void)
-{
-	return subsys_system_register(&s3c2443_subsys, NULL);
-}
-
-core_initcall(s3c2443_core_init);
diff --git a/arch/arm/mach-s3c/s3c244x.c b/arch/arm/mach-s3c/s3c244x.c
deleted file mode 100644
index 95df3491e650..000000000000
--- a/arch/arm/mach-s3c/s3c244x.c
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2004-2006 Simtec Electronics
-//   Ben Dooks <ben@simtec.co.uk>
-//
-// Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443)
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/system_misc.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "map.h"
-#include <asm/irq.h>
-
-#include "regs-clock.h"
-#include "regs-gpio.h"
-
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
-
-#include "s3c24xx.h"
-#include "nand-core-s3c24xx.h"
-#include "regs-dsc-s3c24xx.h"
-
-static struct map_desc s3c244x_iodesc[] __initdata __maybe_unused = {
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(WATCHDOG),
-};
-
-/* uart initialisation */
-
-void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
-}
-
-void __init s3c244x_map_io(void)
-{
-	/* register our io-tables */
-
-	iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
-
-	/* rename any peripherals used differing from the s3c2410 */
-
-	s3c_device_sdi.name  = "s3c2440-sdi";
-	s3c_device_i2c0.name  = "s3c2440-i2c";
-	s3c_nand_setname("s3c2440-nand");
-	s3c_device_ts.name = "s3c2440-ts";
-	s3c_device_usbgadget.name = "s3c2440-usbgadget";
-	s3c2410_device_dclk.name = "s3c2440-dclk";
-}
-
-/* Since the S3C2442 and S3C2440 share items, put both subsystems here */
-
-struct bus_type s3c2440_subsys = {
-	.name		= "s3c2440-core",
-	.dev_name	= "s3c2440-core",
-};
-
-struct bus_type s3c2442_subsys = {
-	.name		= "s3c2442-core",
-	.dev_name	= "s3c2442-core",
-};
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2440 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-static int __init s3c2440_core_init(void)
-{
-	return subsys_system_register(&s3c2440_subsys, NULL);
-}
-
-core_initcall(s3c2440_core_init);
-
-static int __init s3c2442_core_init(void)
-{
-	return subsys_system_register(&s3c2442_subsys, NULL);
-}
-
-core_initcall(s3c2442_core_init);
-
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save s3c244x_sleep[] = {
-	SAVE_ITEM(S3C2440_DSC0),
-	SAVE_ITEM(S3C2440_DSC1),
-	SAVE_ITEM(S3C2440_GPJDAT),
-	SAVE_ITEM(S3C2440_GPJCON),
-	SAVE_ITEM(S3C2440_GPJUP)
-};
-
-static int s3c244x_suspend(void)
-{
-	s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
-	return 0;
-}
-
-static void s3c244x_resume(void)
-{
-	s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
-}
-
-struct syscore_ops s3c244x_pm_syscore_ops = {
-	.suspend	= s3c244x_suspend,
-	.resume		= s3c244x_resume,
-};
-#endif
diff --git a/arch/arm/mach-s3c/s3c24xx.c b/arch/arm/mach-s3c/s3c24xx.c
deleted file mode 100644
index 819a95364af9..000000000000
--- a/arch/arm/mach-s3c/s3c24xx.c
+++ /dev/null
@@ -1,687 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2004-2005 Simtec Electronics
-//	http://www.simtec.co.uk/products/SWLINUX/
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// Common code for S3C24XX machines
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <clocksource/samsung_pwm.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/platform_data/clk-s3c2410.h>
-#include <linux/platform_data/dma-s3c24xx.h>
-#include <linux/dmaengine.h>
-#include <linux/clk/samsung.h>
-
-#include "hardware-s3c24xx.h"
-#include "map.h"
-#include "regs-clock.h"
-#include <asm/irq.h>
-#include <asm/cacheflush.h>
-#include <asm/system_info.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "regs-gpio.h"
-#include "dma-s3c24xx.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "pwm-core.h"
-
-#include "s3c24xx.h"
-
-/* table of supported CPUs */
-
-static const char name_s3c2410[]  = "S3C2410";
-static const char name_s3c2412[]  = "S3C2412";
-static const char name_s3c2416[]  = "S3C2416/S3C2450";
-static const char name_s3c2440[]  = "S3C2440";
-static const char name_s3c2442[]  = "S3C2442";
-static const char name_s3c2442b[]  = "S3C2442B";
-static const char name_s3c2443[]  = "S3C2443";
-static const char name_s3c2410a[] = "S3C2410A";
-static const char name_s3c2440a[] = "S3C2440A";
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= 0x32410000,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2410_map_io,
-		.init_uarts	= s3c2410_init_uarts,
-		.init		= s3c2410_init,
-		.name		= name_s3c2410
-	},
-	{
-		.idcode		= 0x32410002,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2410_map_io,
-		.init_uarts	= s3c2410_init_uarts,
-		.init		= s3c2410a_init,
-		.name		= name_s3c2410a
-	},
-	{
-		.idcode		= 0x32440000,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2440_map_io,
-		.init_uarts	= s3c244x_init_uarts,
-		.init		= s3c2440_init,
-		.name		= name_s3c2440
-	},
-	{
-		.idcode		= 0x32440001,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2440_map_io,
-		.init_uarts	= s3c244x_init_uarts,
-		.init		= s3c2440_init,
-		.name		= name_s3c2440a
-	},
-	{
-		.idcode		= 0x32440aaa,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2442_map_io,
-		.init_uarts	= s3c244x_init_uarts,
-		.init		= s3c2442_init,
-		.name		= name_s3c2442
-	},
-	{
-		.idcode		= 0x32440aab,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2442_map_io,
-		.init_uarts	= s3c244x_init_uarts,
-		.init		= s3c2442_init,
-		.name		= name_s3c2442b
-	},
-	{
-		.idcode		= 0x32412001,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2412_map_io,
-		.init_uarts	= s3c2412_init_uarts,
-		.init		= s3c2412_init,
-		.name		= name_s3c2412,
-	},
-	{			/* a newer version of the s3c2412 */
-		.idcode		= 0x32412003,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2412_map_io,
-		.init_uarts	= s3c2412_init_uarts,
-		.init		= s3c2412_init,
-		.name		= name_s3c2412,
-	},
-	{			/* a strange version of the s3c2416 */
-		.idcode		= 0x32450003,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2416_map_io,
-		.init_uarts	= s3c2416_init_uarts,
-		.init		= s3c2416_init,
-		.name		= name_s3c2416,
-	},
-	{
-		.idcode		= 0x32443001,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2443_map_io,
-		.init_uarts	= s3c2443_init_uarts,
-		.init		= s3c2443_init,
-		.name		= name_s3c2443,
-	},
-};
-
-/* minimal IO mapping */
-
-static struct map_desc s3c_iodesc[] __initdata __maybe_unused = {
-	IODESC_ENT(GPIO),
-	IODESC_ENT(IRQ),
-	IODESC_ENT(MEMCTRL),
-	IODESC_ENT(UART)
-};
-
-/* read cpu identification code */
-
-static unsigned long s3c24xx_read_idcode_v5(void)
-{
-#if defined(CONFIG_CPU_S3C2416)
-	/* s3c2416 is v5, with S3C24XX_GSTATUS1 instead of S3C2412_GSTATUS1 */
-
-	u32 gs = __raw_readl(S3C24XX_GSTATUS1);
-
-	/* test for s3c2416 or similar device */
-	if ((gs >> 16) == 0x3245)
-		return gs;
-#endif
-
-#if defined(CONFIG_CPU_S3C2412)
-	return __raw_readl(S3C2412_GSTATUS1);
-#else
-	return 1UL;	/* don't look like an 2400 */
-#endif
-}
-
-static unsigned long s3c24xx_read_idcode_v4(void)
-{
-	return __raw_readl(S3C2410_GSTATUS1);
-}
-
-static void s3c24xx_default_idle(void)
-{
-	unsigned long tmp = 0;
-	int i;
-
-	/* idle the system by using the idle mode which will wait for an
-	 * interrupt to happen before restarting the system.
-	 */
-
-	/* Warning: going into idle state upsets jtag scanning */
-
-	__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
-		     S3C2410_CLKCON);
-
-	/* the samsung port seems to do a loop and then unset idle.. */
-	for (i = 0; i < 50; i++)
-		tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
-
-	/* this bit is not cleared on re-start... */
-
-	__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
-		     S3C2410_CLKCON);
-}
-
-static struct samsung_pwm_variant s3c24xx_pwm_variant = {
-	.bits		= 16,
-	.div_base	= 1,
-	.has_tint_cstat	= false,
-	.tclk_mask	= (1 << 4),
-};
-
-void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
-{
-	arm_pm_idle = s3c24xx_default_idle;
-
-	/* initialise the io descriptors we need for initialisation */
-	iotable_init(mach_desc, size);
-	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
-
-	if (cpu_architecture() >= CPU_ARCH_ARMv5) {
-		samsung_cpu_id = s3c24xx_read_idcode_v5();
-	} else {
-		samsung_cpu_id = s3c24xx_read_idcode_v4();
-	}
-
-	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-
-	samsung_pwm_set_platdata(&s3c24xx_pwm_variant);
-}
-
-void __init s3c24xx_set_timer_source(unsigned int event, unsigned int source)
-{
-	s3c24xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
-	s3c24xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
-}
-
-void __init s3c24xx_timer_init(void)
-{
-	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
-		IRQ_TIMER0, IRQ_TIMER1, IRQ_TIMER2, IRQ_TIMER3, IRQ_TIMER4,
-	};
-
-	samsung_pwm_clocksource_init(S3C_VA_TIMER,
-					timer_irqs, &s3c24xx_pwm_variant);
-}
-
-/* Serial port registrations */
-
-#define S3C2410_PA_UART0      (S3C24XX_PA_UART)
-#define S3C2410_PA_UART1      (S3C24XX_PA_UART + 0x4000 )
-#define S3C2410_PA_UART2      (S3C24XX_PA_UART + 0x8000 )
-#define S3C2443_PA_UART3      (S3C24XX_PA_UART + 0xC000 )
-
-static struct resource s3c2410_uart0_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_PA_UART0, SZ_16K),
-	[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX0, \
-			IRQ_S3CUART_ERR0 - IRQ_S3CUART_RX0 + 1, \
-			NULL, IORESOURCE_IRQ)
-};
-
-static struct resource s3c2410_uart1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_PA_UART1, SZ_16K),
-	[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX1, \
-			IRQ_S3CUART_ERR1 - IRQ_S3CUART_RX1 + 1, \
-			NULL, IORESOURCE_IRQ)
-};
-
-static struct resource s3c2410_uart2_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_PA_UART2, SZ_16K),
-	[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX2, \
-			IRQ_S3CUART_ERR2 - IRQ_S3CUART_RX2 + 1, \
-			NULL, IORESOURCE_IRQ)
-};
-
-static struct resource s3c2410_uart3_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2443_PA_UART3, SZ_16K),
-	[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX3, \
-			IRQ_S3CUART_ERR3 - IRQ_S3CUART_RX3 + 1, \
-			NULL, IORESOURCE_IRQ)
-};
-
-struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
-	[0] = {
-		.resources	= s3c2410_uart0_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart0_resource),
-	},
-	[1] = {
-		.resources	= s3c2410_uart1_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart1_resource),
-	},
-	[2] = {
-		.resources	= s3c2410_uart2_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart2_resource),
-	},
-	[3] = {
-		.resources	= s3c2410_uart3_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart3_resource),
-	},
-};
-
-#define s3c24xx_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) }))
-
-#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
-	defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-static struct resource s3c2410_dma_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
-	[1] = DEFINE_RES_IRQ(IRQ_DMA0),
-	[2] = DEFINE_RES_IRQ(IRQ_DMA1),
-	[3] = DEFINE_RES_IRQ(IRQ_DMA2),
-	[4] = DEFINE_RES_IRQ(IRQ_DMA3),
-};
-#endif
-
-#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2442)
-static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = {
-	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
-	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
-	[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
-						S3C24XX_DMA_CHANREQ(2, 2) |
-						S3C24XX_DMA_CHANREQ(1, 3),
-	},
-	[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
-	[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
-	[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
-	[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
-	[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
-	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
-						 S3C24XX_DMA_CHANREQ(3, 2) |
-						 S3C24XX_DMA_CHANREQ(3, 3),
-	},
-	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
-						  S3C24XX_DMA_CHANREQ(1, 2),
-	},
-	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 2), },
-	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
-	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
-	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
-	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
-};
-
-static const struct dma_slave_map s3c2410_dma_slave_map[] = {
-	{ "s3c2410-sdi", "rx-tx", (void *)DMACH_SDI },
-	{ "s3c2410-spi.0", "rx", (void *)DMACH_SPI0_RX },
-	{ "s3c2410-spi.0", "tx", (void *)DMACH_SPI0_TX },
-	{ "s3c2410-spi.1", "rx", (void *)DMACH_SPI1_RX },
-	{ "s3c2410-spi.1", "tx", (void *)DMACH_SPI1_TX },
-	/*
-	 * The DMA request source[1] (DMACH_UARTx_SRC2) are
-	 * not used in the UART driver.
-	 */
-	{ "s3c2410-uart.0", "rx", (void *)DMACH_UART0 },
-	{ "s3c2410-uart.0", "tx", (void *)DMACH_UART0 },
-	{ "s3c2410-uart.1", "rx", (void *)DMACH_UART1 },
-	{ "s3c2410-uart.1", "tx", (void *)DMACH_UART1 },
-	{ "s3c2410-uart.2", "rx", (void *)DMACH_UART2 },
-	{ "s3c2410-uart.2", "tx", (void *)DMACH_UART2 },
-	{ "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
-	{ "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
-	{ "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
-	{ "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
-	{ "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
-	{ "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
-	{ "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
-	{ "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
-	{ "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
-	{ "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
-};
-
-static struct s3c24xx_dma_platdata s3c2410_dma_platdata = {
-	.num_phy_channels = 4,
-	.channels = s3c2410_dma_channels,
-	.num_channels = DMACH_MAX,
-	.slave_map = s3c2410_dma_slave_map,
-	.slavecnt = ARRAY_SIZE(s3c2410_dma_slave_map),
-};
-
-struct platform_device s3c2410_device_dma = {
-	.name		= "s3c2410-dma",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
-	.resource	= s3c2410_dma_resource,
-	.dev	= {
-		.dma_mask = &s3c24xx_device_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s3c2410_dma_platdata,
-	},
-};
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = {
-	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
-	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
-	[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
-	[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
-	[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
-	[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
-	[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
-	[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
-	[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
-	[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
-	[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
-	[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
-	[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
-	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
-	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
-	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
-	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, 13 },
-	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, 14 },
-	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, 15 },
-	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 },
-};
-
-static const struct dma_slave_map s3c2412_dma_slave_map[] = {
-	{ "s3c2412-sdi", "rx-tx", (void *)DMACH_SDI },
-	{ "s3c2412-spi.0", "rx", (void *)DMACH_SPI0_RX },
-	{ "s3c2412-spi.0", "tx", (void *)DMACH_SPI0_TX },
-	{ "s3c2412-spi.1", "rx", (void *)DMACH_SPI1_RX },
-	{ "s3c2412-spi.1", "tx", (void *)DMACH_SPI1_TX },
-	{ "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
-	{ "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
-	{ "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
-	{ "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
-	{ "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
-	{ "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
-	{ "s3c2412-iis", "rx", (void *)DMACH_I2S_IN },
-	{ "s3c2412-iis", "tx", (void *)DMACH_I2S_OUT },
-	{ "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
-	{ "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
-	{ "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
-	{ "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
-	{ "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
-	{ "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
-	{ "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
-	{ "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
-};
-
-static struct s3c24xx_dma_platdata s3c2412_dma_platdata = {
-	.num_phy_channels = 4,
-	.channels = s3c2412_dma_channels,
-	.num_channels = DMACH_MAX,
-	.slave_map = s3c2412_dma_slave_map,
-	.slavecnt = ARRAY_SIZE(s3c2412_dma_slave_map),
-};
-
-struct platform_device s3c2412_device_dma = {
-	.name		= "s3c2412-dma",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
-	.resource	= s3c2410_dma_resource,
-	.dev	= {
-		.dma_mask = &s3c24xx_device_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s3c2412_dma_platdata,
-	},
-};
-#endif
-
-#if defined(CONFIG_CPU_S3C2440)
-static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = {
-	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
-	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
-	[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
-						S3C24XX_DMA_CHANREQ(6, 1) |
-						S3C24XX_DMA_CHANREQ(2, 2) |
-						S3C24XX_DMA_CHANREQ(1, 3),
-	},
-	[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
-	[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
-	[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
-	[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
-	[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
-	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
-						 S3C24XX_DMA_CHANREQ(3, 2) |
-						 S3C24XX_DMA_CHANREQ(3, 3),
-	},
-	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
-						  S3C24XX_DMA_CHANREQ(1, 2),
-	},
-	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 0) |
-						   S3C24XX_DMA_CHANREQ(0, 2),
-	},
-	[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 0) |
-						  S3C24XX_DMA_CHANREQ(5, 2),
-	},
-	[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 1) |
-						  S3C24XX_DMA_CHANREQ(6, 3),
-	},
-	[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 2) |
-						  S3C24XX_DMA_CHANREQ(5, 3),
-	},
-	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
-	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
-	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
-	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
-};
-
-static const struct dma_slave_map s3c2440_dma_slave_map[] = {
-	/* TODO: DMACH_XD0 */
-	/* TODO: DMACH_XD1 */
-	{ "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI },
-	{ "s3c2410-spi.0", "rx", (void *)DMACH_SPI0 },
-	{ "s3c2410-spi.0", "tx", (void *)DMACH_SPI0 },
-	{ "s3c2410-spi.1", "rx", (void *)DMACH_SPI1 },
-	{ "s3c2410-spi.1", "tx", (void *)DMACH_SPI1 },
-	{ "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
-	{ "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
-	{ "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
-	{ "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
-	{ "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
-	{ "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
-	{ "s3c2440-uart.3", "rx", (void *)DMACH_UART3 },
-	{ "s3c2440-uart.3", "tx", (void *)DMACH_UART3 },
-	/* TODO: DMACH_TIMER */
-	{ "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
-	{ "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
-	{ "samsung-ac97", "rx", (void *)DMACH_PCM_IN },
-	{ "samsung-ac97", "tx", (void *)DMACH_PCM_OUT },
-	{ "samsung-ac97", "rx", (void *)DMACH_MIC_IN },
-	{ "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
-	{ "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
-	{ "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
-	{ "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
-	{ "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
-	{ "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
-	{ "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
-	{ "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
-};
-
-static struct s3c24xx_dma_platdata s3c2440_dma_platdata = {
-	.num_phy_channels = 4,
-	.channels = s3c2440_dma_channels,
-	.num_channels = DMACH_MAX,
-	.slave_map = s3c2440_dma_slave_map,
-	.slavecnt = ARRAY_SIZE(s3c2440_dma_slave_map),
-};
-
-struct platform_device s3c2440_device_dma = {
-	.name		= "s3c2410-dma",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
-	.resource	= s3c2410_dma_resource,
-	.dev	= {
-		.dma_mask = &s3c24xx_device_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s3c2440_dma_platdata,
-	},
-};
-#endif
-
-#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
-static struct resource s3c2443_dma_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
-	[1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0),
-	[2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1),
-	[3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2),
-	[4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3),
-	[5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4),
-	[6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5),
-};
-
-static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = {
-	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
-	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
-	[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
-	[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
-	[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
-	[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
-	[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
-	[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
-	[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
-	[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
-	[DMACH_UART3] = { S3C24XX_DMA_APB, true, 25 },
-	[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
-	[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
-	[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
-	[DMACH_UART3_SRC2] = { S3C24XX_DMA_APB, true, 26 },
-	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
-	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
-	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
-	[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, 28 },
-	[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, 27 },
-	[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 },
-};
-
-static const struct dma_slave_map s3c2443_dma_slave_map[] = {
-	{ "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI },
-	{ "s3c2443-spi.0", "rx", (void *)DMACH_SPI0_RX },
-	{ "s3c2443-spi.0", "tx", (void *)DMACH_SPI0_TX },
-	{ "s3c2443-spi.1", "rx", (void *)DMACH_SPI1_RX },
-	{ "s3c2443-spi.1", "tx", (void *)DMACH_SPI1_TX },
-	{ "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
-	{ "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
-	{ "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
-	{ "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
-	{ "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
-	{ "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
-	{ "s3c2440-uart.3", "rx", (void *)DMACH_UART3 },
-	{ "s3c2440-uart.3", "tx", (void *)DMACH_UART3 },
-	{ "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
-	{ "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
-};
-
-static struct s3c24xx_dma_platdata s3c2443_dma_platdata = {
-	.num_phy_channels = 6,
-	.channels = s3c2443_dma_channels,
-	.num_channels = DMACH_MAX,
-	.slave_map = s3c2443_dma_slave_map,
-	.slavecnt = ARRAY_SIZE(s3c2443_dma_slave_map),
-};
-
-struct platform_device s3c2443_device_dma = {
-	.name		= "s3c2443-dma",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c2443_dma_resource),
-	.resource	= s3c2443_dma_resource,
-	.dev	= {
-		.dma_mask = &s3c24xx_device_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s3c2443_dma_platdata,
-	},
-};
-#endif
-
-#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2410)
-void __init s3c2410_init_clocks(int xtal)
-{
-	s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-void __init s3c2412_init_clocks(int xtal)
-{
-	s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2416
-void __init s3c2416_init_clocks(int xtal)
-{
-	s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
-}
-#endif
-
-#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2440)
-void __init s3c2440_init_clocks(int xtal)
-{
-	s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
-}
-#endif
-
-#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2442)
-void __init s3c2442_init_clocks(int xtal)
-{
-	s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2443
-void __init s3c2443_init_clocks(int xtal)
-{
-	s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
-}
-#endif
-
-#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \
-	defined(CONFIG_CPU_S3C2442)
-static struct resource s3c2410_dclk_resource[] = {
-	[0] = DEFINE_RES_MEM(0x56000084, 0x4),
-};
-
-static struct s3c2410_clk_platform_data s3c_clk_platform_data = {
-	.modify_misccr = s3c2410_modify_misccr,
-};
-
-struct platform_device s3c2410_device_dclk = {
-	.name		= "s3c2410-dclk",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c2410_dclk_resource),
-	.resource	= s3c2410_dclk_resource,
-	.dev		= {
-		.platform_data = &s3c_clk_platform_data,
-	},
-};
-#endif
-
-#ifndef CONFIG_COMPILE_TEST
-#pragma message "The platform is deprecated and scheduled for removal. " \
-		"Please reach to the maintainers of the platform " \
-		"and linux-samsung-soc@vger.kernel.org if you still use it." \
-		"Without such feedback, the platform will be removed after 2022."
-#endif
diff --git a/arch/arm/mach-s3c/s3c24xx.h b/arch/arm/mach-s3c/s3c24xx.h
deleted file mode 100644
index 34dd4ac507e9..000000000000
--- a/arch/arm/mach-s3c/s3c24xx.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Common Header for S3C24XX SoCs
- */
-
-#ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H
-#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__
-
-#include <linux/reboot.h>
-#include "irqs.h"
-
-struct s3c2410_uartcfg;
-
-#ifdef CONFIG_CPU_S3C2410
-extern  int s3c2410_init(void);
-extern  int s3c2410a_init(void);
-extern void s3c2410_map_io(void);
-extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c2410_init_clocks(int xtal);
-extern void s3c2410_init_irq(void);
-#else
-#define s3c2410_init_clocks NULL
-#define s3c2410_init_uarts NULL
-#define s3c2410_map_io NULL
-#define s3c2410_init NULL
-#define s3c2410a_init NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-extern  int s3c2412_init(void);
-extern void s3c2412_map_io(void);
-extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c2412_init_clocks(int xtal);
-extern  int s3c2412_baseclk_add(void);
-extern void s3c2412_init_irq(void);
-#else
-#define s3c2412_init_clocks NULL
-#define s3c2412_init_uarts NULL
-#define s3c2412_map_io NULL
-#define s3c2412_init NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2416
-extern  int s3c2416_init(void);
-extern void s3c2416_map_io(void);
-extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c2416_init_clocks(int xtal);
-extern  int s3c2416_baseclk_add(void);
-extern void s3c2416_init_irq(void);
-
-extern struct syscore_ops s3c2416_irq_syscore_ops;
-#else
-#define s3c2416_init_clocks NULL
-#define s3c2416_init_uarts NULL
-#define s3c2416_map_io NULL
-#define s3c2416_init NULL
-#endif
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-extern void s3c244x_map_io(void);
-extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-#else
-#define s3c244x_init_uarts NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2440
-extern  int s3c2440_init(void);
-extern void s3c2440_map_io(void);
-extern void s3c2440_init_clocks(int xtal);
-extern void s3c2440_init_irq(void);
-#else
-#define s3c2440_init NULL
-#define s3c2440_map_io NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2442
-extern  int s3c2442_init(void);
-extern void s3c2442_map_io(void);
-extern void s3c2442_init_clocks(int xtal);
-extern void s3c2442_init_irq(void);
-#else
-#define s3c2442_init NULL
-#define s3c2442_map_io NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2443
-extern  int s3c2443_init(void);
-extern void s3c2443_map_io(void);
-extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c2443_init_clocks(int xtal);
-extern  int s3c2443_baseclk_add(void);
-extern void s3c2443_init_irq(void);
-#else
-#define s3c2443_init_clocks NULL
-#define s3c2443_init_uarts NULL
-#define s3c2443_map_io NULL
-#define s3c2443_init NULL
-#endif
-
-extern struct syscore_ops s3c24xx_irq_syscore_ops;
-
-extern struct platform_device s3c2410_device_dma;
-extern struct platform_device s3c2412_device_dma;
-extern struct platform_device s3c2440_device_dma;
-extern struct platform_device s3c2443_device_dma;
-
-extern struct platform_device s3c2410_device_dclk;
-
-enum s3c24xx_timer_mode {
-	S3C24XX_PWM0,
-	S3C24XX_PWM1,
-	S3C24XX_PWM2,
-	S3C24XX_PWM3,
-	S3C24XX_PWM4,
-};
-
-extern void __init s3c24xx_set_timer_source(enum s3c24xx_timer_mode event,
-					    enum s3c24xx_timer_mode source);
-extern void __init s3c24xx_timer_init(void);
-
-#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-s3c/s3c6400.c b/arch/arm/mach-s3c/s3c6400.c
deleted file mode 100644
index 802f4fb7462d..000000000000
--- a/arch/arm/mach-s3c/s3c6400.c
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2009 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//	http://armlinux.simtec.co.uk/
-
-/*
- * NOTE: Code in this file is not used when booting with Device Tree support.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-
-#include "regs-clock.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "sdhci.h"
-#include "iic-core.h"
-
-#include "s3c64xx.h"
-#include "onenand-core-s3c64xx.h"
-
-void __init s3c6400_map_io(void)
-{
-	/* setup SDHCI */
-
-	s3c6400_default_sdhci0();
-	s3c6400_default_sdhci1();
-	s3c6400_default_sdhci2();
-
-	/* the i2c devices are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-
-	s3c_device_nand.name = "s3c6400-nand";
-
-	s3c_onenand_setname("s3c6400-onenand");
-	s3c64xx_onenand1_setname("s3c6400-onenand");
-}
-
-void __init s3c6400_init_irq(void)
-{
-	/* VIC0 does not have IRQS 5..7,
-	 * VIC1 is fully populated. */
-	s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
-}
-
-static struct bus_type s3c6400_subsys = {
-	.name		= "s3c6400-core",
-	.dev_name	= "s3c6400-core",
-};
-
-static struct device s3c6400_dev = {
-	.bus	= &s3c6400_subsys,
-};
-
-static int __init s3c6400_core_init(void)
-{
-	/* Not applicable when using DT. */
-	if (of_have_populated_dt() || soc_is_s3c64xx())
-		return 0;
-
-	return subsys_system_register(&s3c6400_subsys, NULL);
-}
-
-core_initcall(s3c6400_core_init);
-
-int __init s3c6400_init(void)
-{
-	printk("S3C6400: Initialising architecture\n");
-
-	return device_register(&s3c6400_dev);
-}
diff --git a/arch/arm/mach-s3c/s3c6410.c b/arch/arm/mach-s3c/s3c6410.c
index dae17d5fd092..a29276a4fde5 100644
--- a/arch/arm/mach-s3c/s3c6410.c
+++ b/arch/arm/mach-s3c/s3c6410.c
@@ -35,12 +35,9 @@
 #include "cpu.h"
 #include "devs.h"
 #include "sdhci.h"
-#include "adc-core.h"
 #include "iic-core.h"
 
-#include "ata-core-s3c64xx.h"
 #include "s3c64xx.h"
-#include "onenand-core-s3c64xx.h"
 
 void __init s3c6410_map_io(void)
 {
@@ -52,12 +49,6 @@ void __init s3c6410_map_io(void)
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
-
-	s3c_adc_setname("s3c64xx-adc");
-	s3c_device_nand.name = "s3c6400-nand";
-	s3c_onenand_setname("s3c6410-onenand");
-	s3c64xx_onenand1_setname("s3c6410-onenand");
-	s3c_cfcon_setname("s3c64xx-pata");
 }
 
 void __init s3c6410_init_irq(void)
@@ -66,7 +57,7 @@ void __init s3c6410_init_irq(void)
 	s3c64xx_init_irq(~0 & ~(1 << 7), ~0);
 }
 
-struct bus_type s3c6410_subsys = {
+const struct bus_type s3c6410_subsys = {
 	.name		= "s3c6410-core",
 	.dev_name	= "s3c6410-core",
 };
diff --git a/arch/arm/mach-s3c/s3c64xx.c b/arch/arm/mach-s3c/s3c64xx.c
index 0a8116c108fe..6c70ea7f2931 100644
--- a/arch/arm/mach-s3c/s3c64xx.c
+++ b/arch/arm/mach-s3c/s3c64xx.c
@@ -21,13 +21,13 @@
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
 #include <linux/serial_s3c.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <linux/io.h>
 #include <linux/clk/samsung.h>
 #include <linux/dma-mapping.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 #include <linux/irqchip/arm-vic.h>
 #include <clocksource/samsung_pwm.h>
 
@@ -72,18 +72,10 @@ static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 /* table of supported CPUs */
 
-static const char name_s3c6400[] = "S3C6400";
 static const char name_s3c6410[] = "S3C6410";
 
 static struct cpu_table cpu_ids[] __initdata = {
 	{
-		.idcode		= S3C6400_CPU_ID,
-		.idmask		= S3C64XX_CPU_MASK,
-		.map_io		= s3c6400_map_io,
-		.init_uarts	= s3c64xx_init_uarts,
-		.init		= s3c6400_init,
-		.name		= name_s3c6400,
-	}, {
 		.idcode		= S3C6410_CPU_ID,
 		.idmask		= S3C64XX_CPU_MASK,
 		.map_io		= s3c6410_map_io,
@@ -157,7 +149,7 @@ static struct map_desc s3c_iodesc[] __initdata = {
 	},
 };
 
-static struct bus_type s3c64xx_subsys = {
+static const struct bus_type s3c64xx_subsys = {
 	.name		= "s3c64xx-core",
 	.dev_name	= "s3c64xx-core",
 };
@@ -173,7 +165,8 @@ static struct samsung_pwm_variant s3c64xx_pwm_variant = {
 	.tclk_mask	= (1 << 7) | (1 << 6) | (1 << 5),
 };
 
-void __init s3c64xx_set_timer_source(unsigned int event, unsigned int source)
+void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event,
+				     enum s3c64xx_timer_mode source)
 {
 	s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
 	s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
diff --git a/arch/arm/mach-s3c/s3c64xx.h b/arch/arm/mach-s3c/s3c64xx.h
index 92258e4f60f6..0505728f3f7b 100644
--- a/arch/arm/mach-s3c/s3c64xx.h
+++ b/arch/arm/mach-s3c/s3c64xx.h
@@ -23,17 +23,6 @@ struct device_node;
 void s3c64xx_set_xtal_freq(unsigned long freq);
 void s3c64xx_set_xusbxti_freq(unsigned long freq);
 
-#ifdef CONFIG_CPU_S3C6400
-
-extern  int s3c6400_init(void);
-extern void s3c6400_init_irq(void);
-extern void s3c6400_map_io(void);
-
-#else
-#define s3c6400_map_io NULL
-#define s3c6400_init NULL
-#endif
-
 #ifdef CONFIG_CPU_S3C6410
 
 extern  int s3c6410_init(void);
diff --git a/arch/arm/mach-s3c/sdhci.h b/arch/arm/mach-s3c/sdhci.h
index 9f9d419e58d7..1010f94d4a18 100644
--- a/arch/arm/mach-s3c/sdhci.h
+++ b/arch/arm/mach-s3c/sdhci.h
@@ -48,35 +48,10 @@ extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
 
 /* Helper function availability */
 
-extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 
-/* S3C2416 SDHCI setup */
-
-#ifdef CONFIG_S3C2416_SETUP_SDHCI
-static inline void s3c2416_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
-#endif /* CONFIG_S3C_DEV_HSMMC */
-}
-
-static inline void s3c2416_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-}
-
-#else
-static inline void s3c2416_default_sdhci0(void) { }
-static inline void s3c2416_default_sdhci1(void) { }
-
-#endif /* CONFIG_S3C2416_SETUP_SDHCI */
-
 /* S3C64XX SDHCI setup */
 
 #ifdef CONFIG_S3C64XX_SETUP_SDHCI
diff --git a/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c b/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c
index cfa34b55ca21..c3269cd6a848 100644
--- a/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c
+++ b/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c
@@ -9,7 +9,6 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/fb.h>
 #include <linux/gpio.h>
 
 #include "fb.h"
diff --git a/arch/arm/mach-s3c/setup-i2c-s3c24xx.c b/arch/arm/mach-s3c/setup-i2c-s3c24xx.c
deleted file mode 100644
index 0d88366b234c..000000000000
--- a/arch/arm/mach-s3c/setup-i2c-s3c24xx.c
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// S3C24XX Base setup for i2c device
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-struct platform_device;
-
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "gpio-cfg.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
-	s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
-}
diff --git a/arch/arm/mach-s3c/setup-ide-s3c64xx.c b/arch/arm/mach-s3c/setup-ide-s3c64xx.c
deleted file mode 100644
index f11f2b02e49f..000000000000
--- a/arch/arm/mach-s3c/setup-ide-s3c64xx.c
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2010 Samsung Electronics Co., Ltd.
-//		http://www.samsung.com/
-//
-// S3C64XX setup information for IDE
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <linux/platform_data/ata-samsung_cf.h>
-
-#include "map.h"
-#include "regs-clock.h"
-#include "gpio-cfg.h"
-#include "gpio-samsung.h"
-
-void s3c64xx_ide_setup_gpio(void)
-{
-	u32 reg;
-
-	reg = readl(S3C_MEM_SYS_CFG) & (~0x3f);
-
-	/* Independent CF interface, CF chip select configuration */
-	writel(reg | MEM_SYS_CFG_INDEP_CF |
-		MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S3C_MEM_SYS_CFG);
-
-	s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4));
-
-	/* Set XhiDATA[15:0] pins as CF Data[15:0] */
-	s3c_gpio_cfgpin_range(S3C64XX_GPK(0), 16, S3C_GPIO_SFN(5));
-
-	/* Set XhiADDR[2:0] pins as CF ADDR[2:0] */
-	s3c_gpio_cfgpin_range(S3C64XX_GPL(0), 3, S3C_GPIO_SFN(6));
-
-	/* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */
-	s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1));
-	s3c_gpio_cfgpin_range(S3C64XX_GPM(0), 5, S3C_GPIO_SFN(6));
-}
diff --git a/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c b/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c
deleted file mode 100644
index 02131b3a731d..000000000000
--- a/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2010 Promwad Innovation Company
-//	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
-//
-// S3C2416 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
-//
-// Based on mach-s3c64xx/setup-sdhci-gpio.c
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-#include "sdhci.h"
-
-void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
-	s3c_gpio_cfgrange_nopull(S3C2410_GPE(5), 2 + width, S3C_GPIO_SFN(2));
-}
-
-void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
-	s3c_gpio_cfgrange_nopull(S3C2410_GPL(0), width, S3C_GPIO_SFN(2));
-	s3c_gpio_cfgrange_nopull(S3C2410_GPL(8), 2, S3C_GPIO_SFN(2));
-}
diff --git a/arch/arm/mach-s3c/setup-spi-s3c24xx.c b/arch/arm/mach-s3c/setup-spi-s3c24xx.c
deleted file mode 100644
index 93fa1bbc9d5c..000000000000
--- a/arch/arm/mach-s3c/setup-spi-s3c24xx.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// HS-SPI device setup for S3C2443/S3C2416
-//
-// Copyright (C) 2011 Samsung Electronics Ltd.
-//		http://www.samsung.com/
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include "gpio-cfg.h"
-
-#include "hardware-s3c24xx.h"
-#include "regs-gpio.h"
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-int s3c64xx_spi0_cfg_gpio(void)
-{
-	/* enable hsspi bit in misccr */
-	s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
-
-	s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-
-	return 0;
-}
-#endif
diff --git a/arch/arm/mach-s3c/setup-ts-s3c24xx.c b/arch/arm/mach-s3c/setup-ts-s3c24xx.c
deleted file mode 100644
index 57363eaeb7e8..000000000000
--- a/arch/arm/mach-s3c/setup-ts-s3c24xx.c
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2010 Samsung Electronics Co., Ltd.
-//                     http://www.samsung.com/
-//
-// Based on S3C24XX setup for i2c device
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/platform_data/touchscreen-s3c2410.h>
-
-#include "gpio-cfg.h"
-#include "gpio-samsung.h"
-
-/**
- * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems
- * @dev: Device to configure GPIO for (ignored)
- *
- * Configure the GPIO for the S3C2410 system, where we have external FETs
- * connected to the device (later systems such as the S3C2440 integrate
- * these into the device).
- */
-void s3c24xx_ts_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin_range(S3C2410_GPG(12), 4, S3C_GPIO_SFN(3));
-}
diff --git a/arch/arm/mach-s3c/simtec-audio.c b/arch/arm/mach-s3c/simtec-audio.c
deleted file mode 100644
index 487485bcc2ab..000000000000
--- a/arch/arm/mach-s3c/simtec-audio.c
+++ /dev/null
@@ -1,76 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2009 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// Audio setup for various Simtec S3C24XX implementations
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-#include "devs.h"
-
-#include "bast.h"
-#include "simtec.h"
-
-/* platform ops for audio */
-
-static void simtec_audio_startup_lrroute(void)
-{
-	unsigned int tmp;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	tmp = __raw_readb(BAST_VA_CTRL1);
-	tmp &= ~BAST_CPLD_CTRL1_LRMASK;
-	tmp |= BAST_CPLD_CTRL1_LRCDAC;
-	__raw_writeb(tmp, BAST_VA_CTRL1);
-
-	local_irq_restore(flags);
-}
-
-static struct s3c24xx_audio_simtec_pdata simtec_audio_platdata;
-static char our_name[32];
-
-static struct platform_device simtec_audio_dev = {
-	.name	= our_name,
-	.id	= -1,
-	.dev	= {
-		.parent		= &s3c_device_iis.dev,
-		.platform_data	= &simtec_audio_platdata,
-	},
-};
-
-int __init simtec_audio_add(const char *name, bool has_lr_routing,
-			    struct s3c24xx_audio_simtec_pdata *spd)
-{
-	if (!name)
-		name = "tlv320aic23";
-
-	snprintf(our_name, sizeof(our_name)-1, "s3c24xx-simtec-%s", name);
-
-	/* copy platform data so the source can be __initdata */
-	if (spd)
-		simtec_audio_platdata = *spd;
-
-	if (has_lr_routing)
-		simtec_audio_platdata.startup = simtec_audio_startup_lrroute;
-
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-
-	platform_device_register(&s3c_device_iis);
-	platform_device_register(&simtec_audio_dev);
-	return 0;
-}
diff --git a/arch/arm/mach-s3c/simtec-nor.c b/arch/arm/mach-s3c/simtec-nor.c
deleted file mode 100644
index a6fba056a747..000000000000
--- a/arch/arm/mach-s3c/simtec-nor.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2008 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// Simtec NOR mapping
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "map.h"
-
-#include "bast.h"
-#include "simtec.h"
-
-static void simtec_nor_vpp(struct platform_device *pdev, int vpp)
-{
-	unsigned int val;
-
-	val = __raw_readb(BAST_VA_CTRL3);
-
-	printk(KERN_DEBUG "%s(%d)\n", __func__, vpp);
-
-	if (vpp)
-		val |= BAST_CPLD_CTRL3_ROMWEN;
-	else
-		val &= ~BAST_CPLD_CTRL3_ROMWEN;
-
-	__raw_writeb(val, BAST_VA_CTRL3);
-}
-
-static struct physmap_flash_data simtec_nor_pdata = {
-	.width		= 2,
-	.set_vpp	= simtec_nor_vpp,
-	.nr_parts	= 0,
-};
-
-static struct resource simtec_nor_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS1 + 0x4000000, SZ_8M),
-};
-
-static struct platform_device simtec_device_nor = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(simtec_nor_resource),
-	.resource	= simtec_nor_resource,
-	.dev		= {
-		.platform_data = &simtec_nor_pdata,
-	},
-};
-
-void __init nor_simtec_init(void)
-{
-	int ret;
-
-	ret = platform_device_register(&simtec_device_nor);
-	if (ret < 0)
-		printk(KERN_ERR "failed to register physmap-flash device\n");
-	else
-		simtec_nor_vpp(NULL, 1);
-}
diff --git a/arch/arm/mach-s3c/simtec-pm.c b/arch/arm/mach-s3c/simtec-pm.c
deleted file mode 100644
index 490256a766e2..000000000000
--- a/arch/arm/mach-s3c/simtec-pm.c
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2004 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// http://armlinux.simtec.co.uk/
-//
-// Power Management helpers for Simtec S3C24XX implementations
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "map.h"
-#include "regs-gpio.h"
-
-#include <asm/mach-types.h>
-
-#include "pm.h"
-
-#include "regs-mem-s3c24xx.h"
-
-#define COPYRIGHT ", Copyright 2005 Simtec Electronics"
-
-/* pm_simtec_init
- *
- * enable the power management functions
-*/
-
-static __init int pm_simtec_init(void)
-{
-	unsigned long gstatus4;
-
-	/* check which machine we are running on */
-
-	if (!machine_is_bast() && !machine_is_vr1000() &&
-	    !machine_is_anubis() && !machine_is_osiris() &&
-	    !machine_is_aml_m5900())
-		return 0;
-
-	printk(KERN_INFO "Simtec Board Power Management" COPYRIGHT "\n");
-
-	gstatus4  = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30;
-	gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28;
-	gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK);
-
-	__raw_writel(gstatus4, S3C2410_GSTATUS4);
-
-	return s3c_pm_init();
-}
-
-arch_initcall(pm_simtec_init);
diff --git a/arch/arm/mach-s3c/simtec-usb.c b/arch/arm/mach-s3c/simtec-usb.c
deleted file mode 100644
index 76cedb5c7373..000000000000
--- a/arch/arm/mach-s3c/simtec-usb.c
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2004-2005 Simtec Electronics
-//   Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.simtec.co.uk/products/EB2410ITX/
-//
-// Simtec BAST and Thorcom VR1000 USB port support functions
-
-#define DEBUG
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/gpio.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "gpio-samsung.h"
-#include "irqs.h"
-#include <asm/irq.h>
-
-#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include "devs.h"
-
-#include "bast.h"
-#include "simtec.h"
-
-/* control power and monitor over-current events on various Simtec
- * designed boards.
-*/
-
-static unsigned int power_state[2];
-
-static void
-usb_simtec_powercontrol(int port, int to)
-{
-	pr_debug("usb_simtec_powercontrol(%d,%d)\n", port, to);
-
-	power_state[port] = to;
-
-	if (power_state[0] && power_state[1])
-		gpio_set_value(S3C2410_GPB(4), 0);
-	else
-		gpio_set_value(S3C2410_GPB(4), 1);
-}
-
-static irqreturn_t
-usb_simtec_ocirq(int irq, void *pw)
-{
-	struct s3c2410_hcd_info *info = pw;
-
-	if (gpio_get_value(S3C2410_GPG(10)) == 0) {
-		pr_debug("usb_simtec: over-current irq (oc detected)\n");
-		s3c2410_usb_report_oc(info, 3);
-	} else {
-		pr_debug("usb_simtec: over-current irq (oc cleared)\n");
-		s3c2410_usb_report_oc(info, 0);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
-{
-	int ret;
-
-	if (on) {
-		ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq,
-				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				  "USB Over-current", info);
-		if (ret != 0) {
-			printk(KERN_ERR "failed to request usb oc irq\n");
-		}
-	} else {
-		free_irq(BAST_IRQ_USBOC, info);
-	}
-}
-
-static struct s3c2410_hcd_info usb_simtec_info __initdata = {
-	.port[0]	= {
-		.flags	= S3C_HCDFLG_USED
-	},
-	.port[1]	= {
-		.flags	= S3C_HCDFLG_USED
-	},
-
-	.power_control	= usb_simtec_powercontrol,
-	.enable_oc	= usb_simtec_enableoc,
-};
-
-
-int __init usb_simtec_init(void)
-{
-	int ret;
-
-	printk("USB Power Control, Copyright 2004 Simtec Electronics\n");
-
-	ret = gpio_request(S3C2410_GPB(4), "USB power control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPB4\n", __func__);
-		return ret;
-	}
-
-	ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPG10\n", __func__);
-		gpio_free(S3C2410_GPB(4));
-		return ret;
-	}
-
-	/* turn power on */
-	gpio_direction_output(S3C2410_GPB(4), 1);
-	gpio_direction_input(S3C2410_GPG(10));
-
-	s3c_ohci_set_platdata(&usb_simtec_info);
-	return 0;
-}
diff --git a/arch/arm/mach-s3c/simtec.h b/arch/arm/mach-s3c/simtec.h
deleted file mode 100644
index d96bd60872b8..000000000000
--- a/arch/arm/mach-s3c/simtec.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Simtec common functions
- */
-
-struct s3c24xx_audio_simtec_pdata;
-
-extern void nor_simtec_init(void);
-
-extern int usb_simtec_init(void);
-
-extern int simtec_audio_add(const char *codec_name, bool has_lr_routing,
-			    struct s3c24xx_audio_simtec_pdata *pdata);
diff --git a/arch/arm/mach-s3c/sleep-s3c2410.S b/arch/arm/mach-s3c/sleep-s3c2410.S
deleted file mode 100644
index 04aded98782b..000000000000
--- a/arch/arm/mach-s3c/sleep-s3c2410.S
+++ /dev/null
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 Power Manager (Suspend-To-RAM) support
- *
- * Based on PXA/SA1100 sleep code by:
- *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- *	Cliff Brake, (c) 2001
- */
-
-#include <linux/linkage.h>
-#include <linux/serial_s3c.h>
-#include <asm/assembler.h>
-#include "map.h"
-
-#include "regs-gpio.h"
-#include "regs-clock.h"
-
-#include "regs-mem-s3c24xx.h"
-
-	/* s3c2410_cpu_suspend
-	 *
-	 * put the cpu into sleep mode
-	*/
-
-ENTRY(s3c2410_cpu_suspend)
-	@@ prepare cpu to sleep
-
-	ldr	r4, =S3C2410_REFRESH
-	ldr	r5, =S3C24XX_MISCCR
-	ldr	r6, =S3C2410_CLKCON
-	ldr	r7, [r4]		@ get REFRESH (and ensure in TLB)
-	ldr	r8, [r5]		@ get MISCCR (and ensure in TLB)
-	ldr	r9, [r6]		@ get CLKCON (and ensure in TLB)
-
-	orr	r7, r7, #S3C2410_REFRESH_SELF	@ SDRAM sleep command
-	orr	r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
-	orr	r9, r9, #S3C2410_CLKCON_POWER	@ power down command
-
-	teq	pc, #0			@ first as a trial-run to load cache
-	bl	s3c2410_do_sleep
-	teq	r0, r0			@ now do it for real
-	b	s3c2410_do_sleep	@
-
-	@@ align next bit of code to cache line
-	.align	5
-s3c2410_do_sleep:
-	streq	r7, [r4]			@ SDRAM sleep command
-	streq	r8, [r5]			@ SDRAM power-down config
-	streq	r9, [r6]			@ CPU sleep
-1:	beq	1b
-	ret	lr
diff --git a/arch/arm/mach-s3c/sleep-s3c2412.S b/arch/arm/mach-s3c/sleep-s3c2412.S
deleted file mode 100644
index b4b61737fbb2..000000000000
--- a/arch/arm/mach-s3c/sleep-s3c2412.S
+++ /dev/null
@@ -1,53 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412 Power Manager low-level sleep support
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include "map.h"
-
-#include "regs-irq.h"
-
-	.text
-
-	.global	s3c2412_sleep_enter
-
-s3c2412_sleep_enter:
-	mov	r0, #0			/* argument for coprocessors */
-	ldr	r1, =S3C2410_INTPND
-	ldr	r2, =S3C2410_SRCPND
-	ldr	r3, =S3C2410_EINTPEND
-
-	teq	r0, r0
-	bl	s3c2412_sleep_enter1
-	teq	pc, r0
-	bl	s3c2412_sleep_enter1
-
-	.align	5
-
-	/* this is called twice, first with the Z flag to ensure that the
-	 * instructions have been loaded into the cache, and the second
-	 * time to try and suspend the system.
-	*/
-s3c2412_sleep_enter1:
-	mcr	p15, 0, r0, c7, c10, 4
-	mcrne	p15, 0, r0, c7, c0, 4
-
-	/* if we return from here, it is because an interrupt was
-	 * active when we tried to shutdown. Try and ack the IRQ and
-	 * retry, as simply returning causes the system to lock.
-	*/
-
-	ldrne	r9, [r1]
-	strne	r9, [r1]
-	ldrne	r9, [r2]
-	strne	r9, [r2]
-	ldrne	r9, [r3]
-	strne	r9, [r3]
-	bne	s3c2412_sleep_enter1
-
-	ret	lr
diff --git a/arch/arm/mach-s3c/sleep-s3c24xx.S b/arch/arm/mach-s3c/sleep-s3c24xx.S
deleted file mode 100644
index 4b2af91f3dce..000000000000
--- a/arch/arm/mach-s3c/sleep-s3c24xx.S
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 Power Manager (Suspend-To-RAM) support
- *
- * Based on PXA/SA1100 sleep code by:
- *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- *	Cliff Brake, (c) 2001
- */
-
-#include <linux/linkage.h>
-#include <linux/serial_s3c.h>
-#include <asm/assembler.h>
-#include "map.h"
-
-#include "regs-gpio.h"
-#include "regs-clock.h"
-
-/*
- * S3C24XX_DEBUG_RESUME is dangerous if your bootloader does not
- * reset the UART configuration, only enable if you really need this!
- */
-//#define S3C24XX_DEBUG_RESUME
-
-	.text
-
-	/* sleep magic, to allow the bootloader to check for an valid
-	 * image to resume to. Must be the first word before the
-	 * s3c_cpu_resume entry.
-	*/
-
-	.word	0x2bedf00d
-
-	/* s3c_cpu_resume
-	 *
-	 * resume code entry for bootloader to call
-	*/
-
-ENTRY(s3c_cpu_resume)
-	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
-	msr	cpsr_c, r0
-
-	@@ load UART to allow us to print the two characters for
-	@@ resume debug
-
-	mov	r2, #S3C24XX_PA_UART & 0xff000000
-	orr	r2, r2, #S3C24XX_PA_UART & 0xff000
-
-#if 0
-	/* SMDK2440 LED set */
-	mov	r14, #S3C24XX_PA_GPIO
-	ldr	r12, [ r14, #0x54 ]
-	bic	r12, r12, #3<<4
-	orr	r12, r12, #1<<7
-	str	r12, [ r14, #0x54 ]
-#endif
-
-#ifdef S3C24XX_DEBUG_RESUME
-	mov	r3, #'L'
-	strb	r3, [ r2, #S3C2410_UTXH ]
-1001:
-	ldrb	r14, [ r3, #S3C2410_UTRSTAT ]
-	tst	r14, #S3C2410_UTRSTAT_TXE
-	beq	1001b
-#endif /* S3C24XX_DEBUG_RESUME */
-
-	b	cpu_resume
diff --git a/arch/arm/mach-s3c/sleep-s3c64xx.S b/arch/arm/mach-s3c/sleep-s3c64xx.S
index 739e53fbce09..908aa76b1062 100644
--- a/arch/arm/mach-s3c/sleep-s3c64xx.S
+++ b/arch/arm/mach-s3c/sleep-s3c64xx.S
@@ -39,31 +39,4 @@
 ENTRY(s3c_cpu_resume)
 	msr	cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
 	ldr	r2, =LL_UART		/* for debug */
-
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-
-#define S3C64XX_GPNCON			(S3C64XX_GPN_BASE + 0x00)
-#define S3C64XX_GPNDAT			(S3C64XX_GPN_BASE + 0x04)
-
-#define S3C64XX_GPN_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPN_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-	/* Initialise the GPIO state if we are debugging via the SMDK LEDs,
-	 * as the uboot version supplied resets these to inputs during the
-	 * resume checks.
-	*/
-
-	ldr	r3, =S3C64XX_PA_GPIO
-	ldr	r0, [ r3, #S3C64XX_GPNCON ]
-	bic	r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
-			  S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
-	orr	r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
-			  S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
-	str	r0, [ r3, #S3C64XX_GPNCON ]
-
-	ldr	r0, [ r3, #S3C64XX_GPNDAT ]
-	bic	r0, r0, #0xf << 12			@ GPN12..15
-	orr	r0, r0, #1 << 15			@ GPN15
-	str	r0, [ r3, #S3C64XX_GPNDAT ]
-#endif
 	b	cpu_resume
diff --git a/arch/arm/mach-s3c/spi-core-s3c24xx.h b/arch/arm/mach-s3c/spi-core-s3c24xx.h
deleted file mode 100644
index 919c5fd0c9af..000000000000
--- a/arch/arm/mach-s3c/spi-core-s3c24xx.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
- */
-
-#ifndef __PLAT_S3C_SPI_CORE_S3C24XX_H
-#define __PLAT_S3C_SPI_CORE_S3C24XX_H
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c24xx_spi_setname(char *name)
-{
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-	s3c64xx_device_spi0.name = name;
-#endif
-}
-
-#endif /* __PLAT_S3C_SPI_CORE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c/vr1000.h b/arch/arm/mach-s3c/vr1000.h
deleted file mode 100644
index 3cfa296bec2a..000000000000
--- a/arch/arm/mach-s3c/vr1000.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * VR1000 - CPLD control constants
- * Machine VR1000 - IRQ Number definitions
- * Machine VR1000 - Memory map definitions
- */
-
-#ifndef __MACH_S3C24XX_VR1000_H
-#define __MACH_S3C24XX_VR1000_H __FILE__
-
-#define VR1000_CPLD_CTRL2_RAMWEN	(0x04)	/* SRAM Write Enable */
-
-/* irq numbers to onboard peripherals */
-
-#define VR1000_IRQ_USBOC		IRQ_EINT19
-#define VR1000_IRQ_IDE0			IRQ_EINT16
-#define VR1000_IRQ_IDE1			IRQ_EINT17
-#define VR1000_IRQ_SERIAL		IRQ_EINT12
-#define VR1000_IRQ_DM9000A		IRQ_EINT10
-#define VR1000_IRQ_DM9000N		IRQ_EINT9
-#define VR1000_IRQ_SMALERT		IRQ_EINT8
-
-/* map */
-
-#define VR1000_IOADDR(x)		(S3C2410_ADDR((x) + 0x01300000))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define VR1000_VA_CTRL1			VR1000_IOADDR(0x00000000) /* 0x01300000 */
-#define VR1000_PA_CTRL1			(S3C2410_CS5 | 0x7800000)
-
-#define VR1000_VA_CTRL2			VR1000_IOADDR(0x00100000) /* 0x01400000 */
-#define VR1000_PA_CTRL2			(S3C2410_CS1 | 0x6000000)
-
-#define VR1000_VA_CTRL3			VR1000_IOADDR(0x00200000) /* 0x01500000 */
-#define VR1000_PA_CTRL3			(S3C2410_CS1 | 0x6800000)
-
-#define VR1000_VA_CTRL4			VR1000_IOADDR(0x00300000) /* 0x01600000 */
-#define VR1000_PA_CTRL4			(S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define VR1000_PA_PC104_IRQREQ		(S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define VR1000_VA_PC104_IRQREQ		VR1000_IOADDR(0x00400000)
-
-#define VR1000_PA_PC104_IRQRAW		(S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define VR1000_VA_PC104_IRQRAW		VR1000_IOADDR(0x00500000)
-
-#define VR1000_PA_PC104_IRQMASK		(S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define VR1000_VA_PC104_IRQMASK		VR1000_IOADDR(0x00600000)
-
-/*
- * 0xE0000000 contains the IO space that is split by speed and
- * whether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000  8bit,  slow
- * 0x04000000 to 0x08000000  16bit, slow
- * 0x08000000 to 0x0C000000  16bit, net
- * 0x0C000000 to 0x10000000  16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x02000000 to 0x02100000 1MB  IDE primary channel
- * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB  IDE secondary channel
- * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
- * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controllers
- * 0x02600000 to 0x02700000 1MB
- *
- * the phyiscal layout of the zones are:
- *  nGCS2 - 8bit, slow
- *  nGCS3 - 16bit, slow
- *  nGCS4 - 16bit, net
- *  nGCS5 - 16bit, fast
- */
-
-#define VR1000_VA_MULTISPACE	(0xE0000000)
-
-#define VR1000_VA_ISAIO		(VR1000_VA_MULTISPACE + 0x00000000)
-#define VR1000_VA_ISAMEM	(VR1000_VA_MULTISPACE + 0x01000000)
-#define VR1000_VA_IDEPRI	(VR1000_VA_MULTISPACE + 0x02000000)
-#define VR1000_VA_IDEPRIAUX	(VR1000_VA_MULTISPACE + 0x02100000)
-#define VR1000_VA_IDESEC	(VR1000_VA_MULTISPACE + 0x02200000)
-#define VR1000_VA_IDESECAUX	(VR1000_VA_MULTISPACE + 0x02300000)
-#define VR1000_VA_ASIXNET	(VR1000_VA_MULTISPACE + 0x02400000)
-#define VR1000_VA_DM9000	(VR1000_VA_MULTISPACE + 0x02500000)
-#define VR1000_VA_SUPERIO	(VR1000_VA_MULTISPACE + 0x02600000)
-
-/* physical offset addresses for the peripherals */
-
-#define VR1000_PA_IDEPRI	(0x02000000)
-#define VR1000_PA_IDEPRIAUX	(0x02800000)
-#define VR1000_PA_IDESEC	(0x03000000)
-#define VR1000_PA_IDESECAUX	(0x03800000)
-#define VR1000_PA_DM9000	(0x05000000)
-
-#define VR1000_PA_SERIAL	(0x11800000)
-#define VR1000_VA_SERIAL	(VR1000_IOADDR(0x00700000))
-
-/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
-#define VR1000_PA_SRAM		(S3C2410_CS1 | 0x05000000)
-
-/* some configurations for the peripherals */
-
-#define VR1000_DM9000_CS	VR1000_VAM_CS4
-
-#endif /* __MACH_S3C24XX_VR1000_H */
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index d59c094cdea8..6fa70f787df4 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -47,7 +47,7 @@ static void s3c_pm_do_save(struct sleep_save *ptr, int count)
 }
 
 /**
- * s3c_pm_do_restore() - restore register values from the save list.
+ * s3c_pm_do_restore_core() - restore register values from the save list.
  * @ptr: Pointer to an array of registers.
  * @count: Size of the ptr array.
  *
diff --git a/arch/arm/mach-s5pv210/s5pv210.c b/arch/arm/mach-s5pv210/s5pv210.c
index a21ed3bb992a..7d4a10184160 100644
--- a/arch/arm/mach-s5pv210/s5pv210.c
+++ b/arch/arm/mach-s5pv210/s5pv210.c
@@ -7,7 +7,7 @@
 // Tomasz Figa <t.figa@samsung.com>
 
 #include <linux/of_fdt.h>
-#include <linux/of_platform.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 7e0161cb1c1f..0fb4c24cfad5 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -1,7 +1,25 @@
 # SPDX-License-Identifier: GPL-2.0-only
-if ARCH_SA1100
+menuconfig ARCH_SA1100
+	bool "SA11x0 Implementations"
+	depends on ARCH_MULTI_V4 && !(ARCH_MULTI_V4T || ARCH_MULTI_V5)
+	depends on !(ARCH_MOXART || ARCH_GEMINI)
+	depends on ATAGS
+	depends on CPU_LITTLE_ENDIAN
+	depends on MMU
+	select ARCH_NO_SG_CHAIN
+	select ARCH_MTD_XIP
+	select CLKSRC_MMIO
+	select CLKSRC_PXA
+	select CPU_FREQ
+	select CPU_SA1100
+	select GPIOLIB
+	select IRQ_DOMAIN
+	select ISA
+	select NEED_MACH_MEMORY_H
+	help
+	  Support for StrongARM 11x0 based boards.
 
-menu "SA11x0 Implementations"
+if ARCH_SA1100
 
 config SA1100_ASSABET
 	bool "Assabet"
@@ -23,35 +41,6 @@ config ASSABET_NEPONSET
 	  Microprocessor Development Board (Assabet)  with the SA-1111
 	  Development Board (Nepon).
 
-config SA1100_CERF
-	bool "CerfBoard"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1110_CPUFREQ
-	select LEDS_GPIO_REGISTER
-	help
-	  The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
-	  More information is available at:
-	  <http://www.intrinsyc.com/products/cerfboard/>.
-
-	  Say Y if configuring for an Intrinsyc CerfBoard.
-	  Say N otherwise.
-
-choice
-	prompt "Cerf Flash available"
-	depends on SA1100_CERF
-	default SA1100_CERF_FLASH_8MB
-
-config SA1100_CERF_FLASH_8MB
-	bool "8MB"
-
-config SA1100_CERF_FLASH_16MB
-	bool "16MB"
-
-config SA1100_CERF_FLASH_32MB
-	bool "32MB"
-
-endchoice
-
 config SA1100_COLLIE
 	bool "Sharp Zaurus SL5500"
 	# FIXME: select ARM_SA11x0_CPUFREQ
@@ -61,16 +50,6 @@ config SA1100_COLLIE
 	help
 	  Say Y here to support the Sharp Zaurus SL5500 PDAs.
 
-config SA1100_H3100
-	bool "Compaq iPAQ H3100"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1110_CPUFREQ
-	select HTC_EGPIO
-	select MFD_IPAQ_MICRO
-	help
-	  Say Y here if you intend to run this kernel on the Compaq iPAQ
-	  H3100 handheld computer.
-
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
 	select ARM_SA1110_CPUFREQ
@@ -80,18 +59,8 @@ config SA1100_H3600
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3600 and H3700 handheld computers.
 
-config SA1100_BADGE4
-	bool "HP Labs BadgePAD 4"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1100_CPUFREQ
-	select SA1111
-	help
-	  Say Y here if you want to build a kernel for the HP Laboratories
-	  BadgePAD 4.
-
 config SA1100_JORNADA720
 	bool "HP Jornada 720"
-	depends on UNUSED_BOARD_FILES
 	# FIXME: select ARM_SA11x0_CPUFREQ
 	select SA1111
 	help
@@ -109,77 +78,11 @@ config SA1100_JORNADA720_SSP
 	  keyboard, touchscreen, backlight and battery. This driver also activates
 	  the generic SSP which it extends.
 
-config SA1100_HACKKIT
-	bool "HackKit Core CPU Board"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1100_CPUFREQ
-	help
-	  Say Y here to support the HackKit Core CPU Board
-	  <http://hackkit.eletztrick.de>;
-
-config SA1100_LART
-	bool "LART"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1100_CPUFREQ
-	help
-	  Say Y here if you are using the Linux Advanced Radio Terminal
-	  (also known as the LART).  See <http://www.lartmaker.nl/> for
-	  information on the LART.
-
-config SA1100_NANOENGINE
-	bool "nanoEngine"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1110_CPUFREQ
-	select FORCE_PCI
-	select PCI_NANOENGINE
-	help
-	  Say Y here if you are using the Bright Star Engineering nanoEngine.
-	  See <http://www.brightstareng.com/arm/nanoeng.htm> for information
-	  on the BSE nanoEngine.
-
-config SA1100_PLEB
-	bool "PLEB"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1100_CPUFREQ
-	help
-	  Say Y here if you are using version 1 of the Portable Linux
-	  Embedded Board (also known as PLEB).
-	  See <http://www.disy.cse.unsw.edu.au/Hardware/PLEB/>
-	  for more information.
-
-config SA1100_SHANNON
-	bool "Shannon"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1100_CPUFREQ
-	select REGULATOR
-	select REGULATOR_FIXED_VOLTAGE
-	help
-	  The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
-	  limited edition webphone produced by Philips. The Shannon is a SA1100
-	  platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots,
-	  and a telco interface.
-
-config SA1100_SIMPAD
-	bool "Simpad"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1110_CPUFREQ
-	help
-	  The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
-	  are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
-	  FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a
-	  PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same
-	  like CL4 in additional it has a PCMCIA-Slot. For more information
-	  visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>.
-
 config SA1100_SSP
 	tristate "Generic PIO SSP"
-	depends on UNUSED_BOARD_FILES
 	help
 	  Say Y here to enable support for the generic PIO SSP driver.
 	  This isn't for audio support, but for attached sensors and
 	  other devices, eg for BadgePAD 4 sensor support.
 
-endmenu
-
 endif
-
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 28c1cae0053f..b5816d675152 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -9,32 +9,11 @@ obj-y := clock.o generic.o #nmi-oopser.o
 # Specific board support
 obj-$(CONFIG_SA1100_ASSABET)		+= assabet.o
 obj-$(CONFIG_ASSABET_NEPONSET)		+= neponset.o
-
-obj-$(CONFIG_SA1100_BADGE4)		+= badge4.o
-
-obj-$(CONFIG_SA1100_CERF)		+= cerf.o
-
 obj-$(CONFIG_SA1100_COLLIE)		+= collie.o
-
-obj-$(CONFIG_SA1100_H3100)		+= h3100.o h3xxx.o
 obj-$(CONFIG_SA1100_H3600)		+= h3600.o h3xxx.o
-
-obj-$(CONFIG_SA1100_HACKKIT)		+= hackkit.o
-
 obj-$(CONFIG_SA1100_JORNADA720)		+= jornada720.o
 obj-$(CONFIG_SA1100_JORNADA720_SSP)	+= jornada720_ssp.o
 
-obj-$(CONFIG_SA1100_LART)		+= lart.o
-
-obj-$(CONFIG_SA1100_NANOENGINE)		+= nanoengine.o
-obj-$(CONFIG_PCI_NANOENGINE)		+= pci-nanoengine.o
-
-obj-$(CONFIG_SA1100_PLEB)		+= pleb.o
-
-obj-$(CONFIG_SA1100_SHANNON)		+= shannon.o
-
-obj-$(CONFIG_SA1100_SIMPAD)		+= simpad.o
-
 # Miscellaneous functions
 obj-$(CONFIG_PM)			+= pm.o sleep.o
 obj-$(CONFIG_SA1100_SSP)		+= ssp.o
diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot
deleted file mode 100644
index 9d8246f2cab4..000000000000
--- a/arch/arm/mach-sa1100/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-ifeq ($(CONFIG_SA1111),y)
-   zreladdr-y	+= 0xc0208000
-else
-   zreladdr-y	+= 0xc0008000
-endif
-params_phys-y	:= 0xc0000100
-initrd_phys-y	:= 0xc0800000
-
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 9919e0f32c4b..2b833aa0212b 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/errno.h>
+#include <linux/gpio/driver.h>
 #include <linux/gpio/gpio-reg.h>
 #include <linux/gpio/machine.h>
 #include <linux/gpio_keys.h>
@@ -38,7 +39,6 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <linux/platform_data/irda-sa11x0.h>
 #include <asm/mach/map.h>
 #include <mach/assabet.h>
 #include <linux/platform_data/mfd-mcp-sa11x0.h>
@@ -297,38 +297,6 @@ static struct resource assabet_flash_resources[] = {
 };
 
 
-/*
- * Assabet IrDA support code.
- */
-
-static int assabet_irda_set_power(struct device *dev, unsigned int state)
-{
-	static unsigned int bcr_state[4] = {
-		ASSABET_BCR_IRDA_MD0,
-		ASSABET_BCR_IRDA_MD1|ASSABET_BCR_IRDA_MD0,
-		ASSABET_BCR_IRDA_MD1,
-		0
-	};
-
-	if (state < 4)
-		ASSABET_BCR_frob(ASSABET_BCR_IRDA_MD1 | ASSABET_BCR_IRDA_MD0,
-				 bcr_state[state]);
-	return 0;
-}
-
-static void assabet_irda_set_speed(struct device *dev, unsigned int speed)
-{
-	if (speed < 4000000)
-		ASSABET_BCR_clear(ASSABET_BCR_IRDA_FSEL);
-	else
-		ASSABET_BCR_set(ASSABET_BCR_IRDA_FSEL);
-}
-
-static struct irda_platform_data assabet_irda_data = {
-	.set_power	= assabet_irda_set_power,
-	.set_speed	= assabet_irda_set_speed,
-};
-
 static struct ucb1x00_plat_data assabet_ucb1x00_data = {
 	.reset		= assabet_ucb1x00_reset,
 	.gpio_base	= -1,
@@ -618,7 +586,6 @@ static void __init assabet_init(void)
 #endif
 	sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
 			    ARRAY_SIZE(assabet_flash_resources));
-	sa11x0_register_irda(&assabet_irda_data);
 	sa11x0_register_mcp(&assabet_mcp_data);
 
 	if (!machine_has_neponset())
@@ -743,7 +710,7 @@ static void __init assabet_map_io(void)
 	sa1100_register_uart(2, 3);
 }
 
-void __init assabet_init_irq(void)
+static void __init assabet_init_irq(void)
 {
 	u32 def_val;
 
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
deleted file mode 100644
index de79f3502045..000000000000
--- a/arch/arm/mach-sa1100/badge4.c
+++ /dev/null
@@ -1,338 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-sa1100/badge4.c
- *
- * BadgePAD 4 specific initialization
- *
- *   Tim Connors <connors@hpl.hp.com>
- *   Christopher Hoover <ch@hpl.hp.com>
- *
- * Copyright (C) 2002 Hewlett-Packard Company
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-#include <mach/irqs.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/sa1111.h>
-
-#include <mach/badge4.h>
-
-#include "generic.h"
-
-static struct resource sa1111_resources[] = {
-	[0] = DEFINE_RES_MEM(BADGE4_SA1111_BASE, 0x2000),
-	[1] = DEFINE_RES_IRQ(BADGE4_IRQ_GPIO_SA1111),
-};
-
-static int badge4_sa1111_enable(void *data, unsigned devid)
-{
-	if (devid == SA1111_DEVID_USB)
-		badge4_set_5V(BADGE4_5V_USB, 1);
-	return 0;
-}
-
-static void badge4_sa1111_disable(void *data, unsigned devid)
-{
-	if (devid == SA1111_DEVID_USB)
-		badge4_set_5V(BADGE4_5V_USB, 0);
-}
-
-static struct sa1111_platform_data sa1111_info = {
-	.disable_devs	= SA1111_DEVID_PS2_MSE,
-	.enable		= badge4_sa1111_enable,
-	.disable	= badge4_sa1111_disable,
-};
-
-static u64 sa1111_dmamask = 0xffffffffUL;
-
-static struct platform_device sa1111_device = {
-	.name		= "sa1111",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &sa1111_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-		.platform_data = &sa1111_info,
-	},
-	.num_resources	= ARRAY_SIZE(sa1111_resources),
-	.resource	= sa1111_resources,
-};
-
-/* LEDs */
-struct gpio_led badge4_gpio_leds[] = {
-	{
-		.name			= "badge4:red",
-		.default_trigger	= "heartbeat",
-		.gpio			= 7,
-	},
-	{
-		.name			= "badge4:green",
-		.default_trigger	= "cpu0",
-		.gpio			= 9,
-	},
-};
-
-static struct gpio_led_platform_data badge4_gpio_led_info = {
-	.leds		= badge4_gpio_leds,
-	.num_leds	= ARRAY_SIZE(badge4_gpio_leds),
-};
-
-static struct platform_device badge4_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &badge4_gpio_led_info,
-	}
-};
-
-static struct platform_device *devices[] __initdata = {
-	&sa1111_device,
-	&badge4_leds,
-};
-
-static int __init badge4_sa1111_init(void)
-{
-	/*
-	 * Ensure that the memory bus request/grant signals are setup,
-	 * and the grant is held in its inactive state
-	 */
-	sa1110_mb_disable();
-
-	/*
-	 * Probe for SA1111.
-	 */
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-
-/*
- * 1 x Intel 28F320C3 Advanced+ Boot Block Flash (32 Mi bit)
- *   Eight 4 KiW Parameter Bottom Blocks (64 KiB)
- *   Sixty-three 32 KiW Main Blocks (4032 Ki b)
- *
- * <or>
- *
- * 1 x Intel 28F640C3 Advanced+ Boot Block Flash (64 Mi bit)
- *   Eight 4 KiW Parameter Bottom Blocks (64 KiB)
- *   One-hundred-twenty-seven 32 KiW Main Blocks (8128 Ki b)
- */
-static struct mtd_partition badge4_partitions[] = {
-	{
-		.name	= "BLOB boot loader",
-		.offset	= 0,
-		.size	= 0x0000A000
-	}, {
-		.name	= "params",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 0x00006000
-	}, {
-		.name	= "root",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL
-	}
-};
-
-static struct flash_platform_data badge4_flash_data = {
-	.map_name	= "cfi_probe",
-	.parts		= badge4_partitions,
-	.nr_parts	= ARRAY_SIZE(badge4_partitions),
-};
-
-static struct resource badge4_flash_resource =
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_64M);
-
-static int five_v_on __initdata = 0;
-
-static int __init five_v_on_setup(char *ignore)
-{
-	five_v_on = 1;
-	return 1;
-}
-__setup("five_v_on", five_v_on_setup);
-
-
-static int __init badge4_init(void)
-{
-	int ret;
-
-	if (!machine_is_badge4())
-		return -ENODEV;
-
-	/* LCD */
-	GPCR  = (BADGE4_GPIO_LGP2 | BADGE4_GPIO_LGP3 |
-		 BADGE4_GPIO_LGP4 | BADGE4_GPIO_LGP5 |
-		 BADGE4_GPIO_LGP6 | BADGE4_GPIO_LGP7 |
-		 BADGE4_GPIO_LGP8 | BADGE4_GPIO_LGP9 |
-		 BADGE4_GPIO_GPA_VID | BADGE4_GPIO_GPB_VID |
-		 BADGE4_GPIO_GPC_VID);
-	GPDR &= ~BADGE4_GPIO_INT_VID;
-	GPDR |= (BADGE4_GPIO_LGP2 | BADGE4_GPIO_LGP3 |
-		 BADGE4_GPIO_LGP4 | BADGE4_GPIO_LGP5 |
-		 BADGE4_GPIO_LGP6 | BADGE4_GPIO_LGP7 |
-		 BADGE4_GPIO_LGP8 | BADGE4_GPIO_LGP9 |
-		 BADGE4_GPIO_GPA_VID | BADGE4_GPIO_GPB_VID |
-		 BADGE4_GPIO_GPC_VID);
-
-	/* SDRAM SPD i2c */
-	GPCR  = (BADGE4_GPIO_SDSDA | BADGE4_GPIO_SDSCL);
-	GPDR |= (BADGE4_GPIO_SDSDA | BADGE4_GPIO_SDSCL);
-
-	/* uart */
-	GPCR  = (BADGE4_GPIO_UART_HS1 | BADGE4_GPIO_UART_HS2);
-	GPDR |= (BADGE4_GPIO_UART_HS1 | BADGE4_GPIO_UART_HS2);
-
-	/* CPLD muxsel0 input for mux/adc chip select */
-	GPCR  = BADGE4_GPIO_MUXSEL0;
-	GPDR |= BADGE4_GPIO_MUXSEL0;
-
-	/* test points: J5, J6 as inputs, J7 outputs */
-	GPDR &= ~(BADGE4_GPIO_TESTPT_J5 | BADGE4_GPIO_TESTPT_J6);
-	GPCR  = BADGE4_GPIO_TESTPT_J7;
-	GPDR |= BADGE4_GPIO_TESTPT_J7;
-
-	/* 5V supply rail. */
-	GPCR  = BADGE4_GPIO_PCMEN5V;		/* initially off */
-	GPDR |= BADGE4_GPIO_PCMEN5V;
-
-	/* CPLD sdram type inputs; set up by blob */
-	//GPDR |= (BADGE4_GPIO_SDTYP1 | BADGE4_GPIO_SDTYP0);
-	printk(KERN_DEBUG __FILE__ ": SDRAM CPLD typ1=%d typ0=%d\n",
-		!!(GPLR & BADGE4_GPIO_SDTYP1),
-		!!(GPLR & BADGE4_GPIO_SDTYP0));
-
-	/* SA1111 reset pin; set up by blob */
-	//GPSR  = BADGE4_GPIO_SA1111_NRST;
-	//GPDR |= BADGE4_GPIO_SA1111_NRST;
-
-
-	/* power management cruft */
-	PGSR = 0;
-	PWER = 0;
-	PCFR = 0;
-	PSDR = 0;
-
-	PWER |= PWER_GPIO26;	/* wake up on an edge from TESTPT_J5 */
-	PWER |= PWER_RTC;	/* wake up if rtc fires */
-
-	/* drive sa1111_nrst during sleep */
-	PGSR |= BADGE4_GPIO_SA1111_NRST;
-	/* drive CPLD as is during sleep */
-	PGSR |= (GPLR & (BADGE4_GPIO_SDTYP0|BADGE4_GPIO_SDTYP1));
-
-
-	/* Now bring up the SA-1111. */
-	ret = badge4_sa1111_init();
-	if (ret < 0)
-		printk(KERN_ERR
-			"%s: SA-1111 initialization failed (%d)\n",
-			__func__, ret);
-
-
-	/* maybe turn on 5v0 from the start */
-	badge4_set_5V(BADGE4_5V_INITIALLY, five_v_on);
-
-	sa11x0_register_mtd(&badge4_flash_data, &badge4_flash_resource, 1);
-
-	return 0;
-}
-
-arch_initcall(badge4_init);
-
-
-static unsigned badge4_5V_bitmap = 0;
-
-void badge4_set_5V(unsigned subsystem, int on)
-{
-	unsigned long flags;
-	unsigned old_5V_bitmap;
-
-	local_irq_save(flags);
-
-	old_5V_bitmap = badge4_5V_bitmap;
-
-	if (on) {
-		badge4_5V_bitmap |= subsystem;
-	} else {
-		badge4_5V_bitmap &= ~subsystem;
-	}
-
-	/* detect on->off and off->on transitions */
-	if ((!old_5V_bitmap) && (badge4_5V_bitmap)) {
-		/* was off, now on */
-		printk(KERN_INFO "%s: enabling 5V supply rail\n", __func__);
-		GPSR = BADGE4_GPIO_PCMEN5V;
-	} else if ((old_5V_bitmap) && (!badge4_5V_bitmap)) {
-		/* was on, now off */
-		printk(KERN_INFO "%s: disabling 5V supply rail\n", __func__);
-		GPCR = BADGE4_GPIO_PCMEN5V;
-	}
-
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(badge4_set_5V);
-
-
-static struct map_desc badge4_io_desc[] __initdata = {
-	{	/* SRAM  bank 1 */
-		.virtual	= 0xf1000000,
-		.pfn		= __phys_to_pfn(0x08000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}, {	/* SRAM  bank 2 */
-		.virtual	= 0xf2000000,
-		.pfn		= __phys_to_pfn(0x10000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void
-badge4_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
-{
-	if (!state) {
-		Ser1SDCR0 |= SDCR0_UART;
-	}
-}
-
-static struct sa1100_port_fns badge4_port_fns __initdata = {
-	.pm		= badge4_uart_pm,
-};
-
-static void __init badge4_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(badge4_io_desc, ARRAY_SIZE(badge4_io_desc));
-
-	sa1100_register_uart_fns(&badge4_port_fns);
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 1);
-}
-
-MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
-	.atag_offset	= 0x100,
-	.map_io		= badge4_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_late	= sa11x0_init_late,
-	.init_time	= sa1100_timer_init,
-#ifdef CONFIG_SA1111
-	.dma_zone_size	= SZ_1M,
-#endif
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
deleted file mode 100644
index f9243a3fd69c..000000000000
--- a/arch/arm/mach-sa1100/cerf.c
+++ /dev/null
@@ -1,181 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-sa1100/cerf.c
- *
- * Apr-2003 : Removed some old PDA crud [FB]
- * Oct-2003 : Added uart2 resource [FB]
- * Jan-2004 : Removed io map for flash [FB]
- */
-
-#include <linux/init.h>
-#include <linux/gpio/machine.h>
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-
-#include <mach/cerf.h>
-#include <linux/platform_data/mfd-mcp-sa11x0.h>
-#include <mach/irqs.h>
-#include "generic.h"
-
-static struct resource cerfuart2_resources[] = {
-	[0] = DEFINE_RES_MEM(0x80030000, SZ_64K),
-};
-
-static struct platform_device cerfuart2_device = {
-	.name		= "sa11x0-uart",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(cerfuart2_resources),
-	.resource	= cerfuart2_resources,
-};
-
-/* Compact Flash */
-static struct gpiod_lookup_table cerf_cf_gpio_table = {
-	.dev_id = "sa11x0-pcmcia.1",
-	.table = {
-		GPIO_LOOKUP("gpio", 19, "bvd2", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio", 20, "bvd1", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio", 21, "reset", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio", 22, "ready", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio", 23, "detect", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/* LEDs */
-struct gpio_led cerf_gpio_leds[] = {
-	{
-		.name			= "cerf:d0",
-		.default_trigger	= "heartbeat",
-		.gpio			= 0,
-	},
-	{
-		.name			= "cerf:d1",
-		.default_trigger	= "cpu0",
-		.gpio			= 1,
-	},
-	{
-		.name			= "cerf:d2",
-		.default_trigger	= "default-on",
-		.gpio			= 2,
-	},
-	{
-		.name			= "cerf:d3",
-		.default_trigger	= "default-on",
-		.gpio			= 3,
-	},
-
-};
-
-static struct gpio_led_platform_data cerf_gpio_led_info = {
-	.leds		= cerf_gpio_leds,
-	.num_leds	= ARRAY_SIZE(cerf_gpio_leds),
-};
-
-static struct platform_device *cerf_devices[] __initdata = {
-	&cerfuart2_device,
-};
-
-#ifdef CONFIG_SA1100_CERF_FLASH_32MB
-#  define CERF_FLASH_SIZE	0x02000000
-#elif defined CONFIG_SA1100_CERF_FLASH_16MB
-#  define CERF_FLASH_SIZE	0x01000000
-#elif defined CONFIG_SA1100_CERF_FLASH_8MB
-#  define CERF_FLASH_SIZE	0x00800000
-#else
-#  error "Undefined flash size for CERF"
-#endif
-
-static struct mtd_partition cerf_partitions[] = {
-	{
-		.name		= "Bootloader",
-		.size		= 0x00020000,
-		.offset		= 0x00000000,
-	}, {
-		.name		= "Params",
-		.size		= 0x00040000,
-		.offset		= 0x00020000,
-	}, {
-		.name		= "Kernel",
-		.size		= 0x00100000,
-		.offset		= 0x00060000,
-	}, {
-		.name		= "Filesystem",
-		.size		= CERF_FLASH_SIZE-0x00160000,
-		.offset		= 0x00160000,
-	}
-};
-
-static struct flash_platform_data cerf_flash_data = {
-	.map_name	= "cfi_probe",
-	.parts		= cerf_partitions,
-	.nr_parts	= ARRAY_SIZE(cerf_partitions),
-};
-
-static struct resource cerf_flash_resource =
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
-
-static void __init cerf_init_irq(void)
-{
-	sa1100_init_irq();
-	irq_set_irq_type(CERF_ETH_IRQ, IRQ_TYPE_EDGE_RISING);
-}
-
-static struct map_desc cerf_io_desc[] __initdata = {
-  	{	/* Crystal Ethernet Chip */
-		.virtual	=  0xf0000000,
-		.pfn		= __phys_to_pfn(0x08000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init cerf_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(cerf_io_desc, ARRAY_SIZE(cerf_io_desc));
-
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 2); /* disable this and the uart2 device for sa1100_fir */
-	sa1100_register_uart(2, 1);
-}
-
-static struct mcp_plat_data cerf_mcp_data = {
-	.mccr0		= MCCR0_ADM,
-	.sclk_rate	= 11981000,
-};
-
-static void __init cerf_init(void)
-{
-	sa11x0_ppc_configure_mcp();
-	platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
-	gpio_led_register_device(-1, &cerf_gpio_led_info);
-	sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
-	sa11x0_register_mcp(&cerf_mcp_data);
-	sa11x0_register_pcmcia(1, &cerf_cf_gpio_table);
-}
-
-MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
-	/* Maintainer: support@intrinsyc.com */
-	.map_io		= cerf_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= cerf_init_irq,
-	.init_time	= sa1100_timer_init,
-	.init_machine	= cerf_init,
-	.init_late	= sa11x0_init_late,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 14c33ed05318..466d755d5702 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -44,7 +44,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
-#include <linux/platform_data/irda-sa11x0.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
@@ -118,37 +117,6 @@ static struct gpiod_lookup_table collie_battery_gpiod_table = {
 	},
 };
 
-static int collie_ir_startup(struct device *dev)
-{
-	int rc = gpio_request(COLLIE_GPIO_IR_ON, "IrDA");
-	if (rc)
-		return rc;
-	rc = gpio_direction_output(COLLIE_GPIO_IR_ON, 1);
-
-	if (!rc)
-		return 0;
-
-	gpio_free(COLLIE_GPIO_IR_ON);
-	return rc;
-}
-
-static void collie_ir_shutdown(struct device *dev)
-{
-	gpio_free(COLLIE_GPIO_IR_ON);
-}
-
-static int collie_ir_set_power(struct device *dev, unsigned int state)
-{
-	gpio_set_value(COLLIE_GPIO_IR_ON, !state);
-	return 0;
-}
-
-static struct irda_platform_data collie_ir_data = {
-	.startup = collie_ir_startup,
-	.shutdown = collie_ir_shutdown,
-	.set_power = collie_ir_set_power,
-};
-
 /*
  * Collie AC IN
  */
@@ -420,7 +388,6 @@ static void __init collie_init(void)
 	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
 			    ARRAY_SIZE(collie_flash_resources));
 	sa11x0_register_mcp(&collie_mcp_data);
-	sa11x0_register_irda(&collie_ir_data);
 
 	sharpsl_save_param();
 }
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 6c21f214cd60..5383a26f5116 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -250,25 +250,6 @@ void sa11x0_register_mtd(struct flash_platform_data *flash,
 	sa11x0_register_device(&sa11x0mtd_device, flash);
 }
 
-static struct resource sa11x0ir_resources[] = {
-	DEFINE_RES_MEM(__PREG(Ser2UTCR0), 0x24),
-	DEFINE_RES_MEM(__PREG(Ser2HSCR0), 0x1c),
-	DEFINE_RES_MEM(__PREG(Ser2HSCR2), 0x04),
-	DEFINE_RES_IRQ(IRQ_Ser2ICP),
-};
-
-static struct platform_device sa11x0ir_device = {
-	.name		= "sa11x0-ir",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sa11x0ir_resources),
-	.resource	= sa11x0ir_resources,
-};
-
-void sa11x0_register_irda(struct irda_platform_data *irda)
-{
-	sa11x0_register_device(&sa11x0ir_device, irda);
-}
-
 static struct resource sa1100_rtc_resources[] = {
 	DEFINE_RES_MEM(0x90010000, 0x40),
 	DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"),
@@ -317,7 +298,7 @@ static struct platform_device *sa11x0_devices[] __initdata = {
 static int __init sa1100_init(void)
 {
 	struct resource wdt_res = DEFINE_RES_MEM(0x90000000, 0x20);
-	pm_power_off = sa1100_power_off;
+	register_platform_power_off(sa1100_power_off);
 
 	regulator_has_full_constraints();
 
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 158a4fd5ca24..5fe0d4fc0f8c 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -30,9 +30,6 @@ struct resource;
 void sa11x0_register_mtd(struct flash_platform_data *flash,
 			 struct resource *res, int nr);
 
-struct irda_platform_data;
-void sa11x0_register_irda(struct irda_platform_data *irda);
-
 struct mcp_plat_data;
 void sa11x0_ppc_configure_mcp(void);
 void sa11x0_register_mcp(struct mcp_plat_data *data);
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
deleted file mode 100644
index 51eaeeaf3f10..000000000000
--- a/arch/arm/mach-sa1100/h3100.c
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Support for Compaq iPAQ H3100 handheld computer
- *
- * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
- * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-#include <video/sa1100fb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <linux/platform_data/irda-sa11x0.h>
-
-#include <mach/h3xxx.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-/*
- * helper for sa1100fb
- */
-static struct gpio h3100_lcd_gpio[] = {
-	{ H3100_GPIO_LCD_3V_ON, GPIOF_OUT_INIT_LOW, "LCD 3V" },
-	{ H3XXX_EGPIO_LCD_ON, GPIOF_OUT_INIT_LOW, "LCD ON" },
-};
-
-static bool h3100_lcd_request(void)
-{
-	static bool h3100_lcd_ok;
-	int rc;
-
-	if (h3100_lcd_ok)
-		return true;
-
-	rc = gpio_request_array(h3100_lcd_gpio, ARRAY_SIZE(h3100_lcd_gpio));
-	if (rc)
-		pr_err("%s: can't request GPIOs\n", __func__);
-	else
-		h3100_lcd_ok = true;
-
-	return h3100_lcd_ok;
-}
-
-static void h3100_lcd_power(int enable)
-{
-	if (!h3100_lcd_request())
-		return;
-
-	gpio_set_value(H3100_GPIO_LCD_3V_ON, enable);
-	gpio_set_value(H3XXX_EGPIO_LCD_ON, enable);
-}
-
-static struct sa1100fb_mach_info h3100_lcd_info = {
-	.pixclock	= 406977, 	.bpp		= 4,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 26,		.vsync_len	= 41,
-	.left_margin	= 4,		.upper_margin	= 0,
-	.right_margin	= 4,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 1,
-	.cmap_inverse	= 1,
-
-	.lccr0		= LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-
-	.lcd_power = h3100_lcd_power,
-};
-
-static void __init h3100_map_io(void)
-{
-	h3xxx_map_io();
-
-	/* Older bootldrs put GPIO2-9 in alternate mode on the
-	   assumption that they are used for video */
-	GAFR &= ~0x000001fb;
-}
-
-/*
- * This turns the IRDA power on or off on the Compaq H3100
- */
-static struct gpio h3100_irda_gpio[] = {
-	{ H3100_GPIO_IR_ON,	GPIOF_OUT_INIT_LOW, "IrDA power" },
-	{ H3100_GPIO_IR_FSEL,	GPIOF_OUT_INIT_LOW, "IrDA fsel" },
-};
-
-static int h3100_irda_set_power(struct device *dev, unsigned int state)
-{
-	gpio_set_value(H3100_GPIO_IR_ON, state);
-	return 0;
-}
-
-static void h3100_irda_set_speed(struct device *dev, unsigned int speed)
-{
-	gpio_set_value(H3100_GPIO_IR_FSEL, !(speed < 4000000));
-}
-
-static int h3100_irda_startup(struct device *dev)
-{
-	return gpio_request_array(h3100_irda_gpio, sizeof(h3100_irda_gpio));
-}
-
-static void h3100_irda_shutdown(struct device *dev)
-{
-	return gpio_free_array(h3100_irda_gpio, sizeof(h3100_irda_gpio));
-}
-
-static struct irda_platform_data h3100_irda_data = {
-	.set_power	= h3100_irda_set_power,
-	.set_speed	= h3100_irda_set_speed,
-	.startup	= h3100_irda_startup,
-	.shutdown	= h3100_irda_shutdown,
-};
-
-static void __init h3100_mach_init(void)
-{
-	h3xxx_mach_init();
-
-	sa11x0_register_pcmcia(-1, NULL);
-	sa11x0_register_lcd(&h3100_lcd_info);
-	sa11x0_register_irda(&h3100_irda_data);
-}
-
-MACHINE_START(H3100, "Compaq iPAQ H3100")
-	.atag_offset	= 0x100,
-	.map_io		= h3100_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_time	= sa1100_timer_init,
-	.init_machine	= h3100_mach_init,
-	.init_late	= sa11x0_init_late,
-	.restart	= sa11x0_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index baf529117b26..1cfc0b1fa41c 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -14,23 +14,12 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <linux/platform_data/irda-sa11x0.h>
 
 #include <mach/h3xxx.h>
 #include <mach/irqs.h>
 
 #include "generic.h"
 
-/*
- * helper for sa1100fb
- */
-static struct gpio h3600_lcd_gpio[] = {
-	{ H3XXX_EGPIO_LCD_ON,	GPIOF_OUT_INIT_LOW,	"LCD power" },
-	{ H3600_EGPIO_LCD_PCI,	GPIOF_OUT_INIT_LOW,	"LCD control" },
-	{ H3600_EGPIO_LCD_5V_ON, GPIOF_OUT_INIT_LOW,	"LCD 5v" },
-	{ H3600_EGPIO_LVDD_ON,	GPIOF_OUT_INIT_LOW,	"LCD 9v/-6.5v" },
-};
-
 static bool h3600_lcd_request(void)
 {
 	static bool h3600_lcd_ok;
@@ -39,7 +28,42 @@ static bool h3600_lcd_request(void)
 	if (h3600_lcd_ok)
 		return true;
 
-	rc = gpio_request_array(h3600_lcd_gpio, ARRAY_SIZE(h3600_lcd_gpio));
+	rc = gpio_request(H3XXX_EGPIO_LCD_ON, "LCD power");
+	if (rc)
+		goto out;
+	rc = gpio_direction_output(H3XXX_EGPIO_LCD_ON, 0);
+	if (rc)
+		goto out_free_on;
+	rc = gpio_request(H3600_EGPIO_LCD_PCI, "LCD control");
+	if (rc)
+		goto out_free_on;
+	rc = gpio_direction_output(H3600_EGPIO_LCD_PCI, 0);
+	if (rc)
+		goto out_free_pci;
+	rc = gpio_request(H3600_EGPIO_LCD_5V_ON, "LCD 5v");
+	if (rc)
+		goto out_free_pci;
+	rc = gpio_direction_output(H3600_EGPIO_LCD_5V_ON, 0);
+	if (rc)
+		goto out_free_5v_on;
+	rc = gpio_request(H3600_EGPIO_LVDD_ON, "LCD 9v/-6.5v");
+	if (rc)
+		goto out_free_5v_on;
+	rc = gpio_direction_output(H3600_EGPIO_LVDD_ON, 0);
+	if (rc)
+		goto out_free_lvdd_on;
+
+	goto out;
+
+out_free_lvdd_on:
+	gpio_free(H3600_EGPIO_LVDD_ON);
+out_free_5v_on:
+	gpio_free(H3600_EGPIO_LCD_5V_ON);
+out_free_pci:
+	gpio_free(H3600_EGPIO_LCD_PCI);
+out_free_on:
+	gpio_free(H3XXX_EGPIO_LCD_ON);
+out:
 	if (rc)
 		pr_err("%s: can't request GPIOs\n", __func__);
 	else
@@ -90,48 +114,11 @@ static void __init h3600_map_io(void)
 	h3xxx_map_io();
 }
 
-/*
- * This turns the IRDA power on or off on the Compaq H3600
- */
-static struct gpio h3600_irda_gpio[] = {
-	{ H3600_EGPIO_IR_ON,	GPIOF_OUT_INIT_LOW, "IrDA power" },
-	{ H3600_EGPIO_IR_FSEL,	GPIOF_OUT_INIT_LOW, "IrDA fsel" },
-};
-
-static int h3600_irda_set_power(struct device *dev, unsigned int state)
-{
-	gpio_set_value(H3600_EGPIO_IR_ON, state);
-	return 0;
-}
-
-static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
-{
-	gpio_set_value(H3600_EGPIO_IR_FSEL, !(speed < 4000000));
-}
-
-static int h3600_irda_startup(struct device *dev)
-{
-	return gpio_request_array(h3600_irda_gpio, sizeof(h3600_irda_gpio));
-}
-
-static void h3600_irda_shutdown(struct device *dev)
-{
-	return gpio_free_array(h3600_irda_gpio, sizeof(h3600_irda_gpio));
-}
-
-static struct irda_platform_data h3600_irda_data = {
-	.set_power	= h3600_irda_set_power,
-	.set_speed	= h3600_irda_set_speed,
-	.startup	= h3600_irda_startup,
-	.shutdown	= h3600_irda_shutdown,
-};
-
 static void __init h3600_mach_init(void)
 {
 	h3xxx_mach_init();
 
 	sa11x0_register_lcd(&h3600_lcd_info);
-	sa11x0_register_irda(&h3600_irda_data);
 }
 
 MACHINE_START(H3600, "Compaq iPAQ H3600")
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
deleted file mode 100644
index 3085f1c2e586..000000000000
--- a/arch/arm/mach-sa1100/hackkit.c
+++ /dev/null
@@ -1,184 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-sa1100/hackkit.c
- *
- * Copyright (C) 2002 Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
- *
- * This file contains all HackKit tweaks. Based on original work from
- * Nicolas Pitre's assabet fixes
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/tty.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/cpufreq.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/serial_core.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/tty.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/pgtable.h>
-
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-/**********************************************************************
- *  prototypes
- */
-
-/* init funcs */
-static void __init hackkit_map_io(void);
-
-static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate);
-
-/**********************************************************************
- *  global data
- */
-
-/**********************************************************************
- *  static data
- */
-
-static struct map_desc hackkit_io_desc[] __initdata = {
-	{	/* Flash bank 0 */
-		.virtual	=  0xe8000000,
-		.pfn		= __phys_to_pfn(0x00000000),
-		.length		= 0x01000000,
-		.type		= MT_DEVICE
-	},
-};
-
-static struct sa1100_port_fns hackkit_port_fns __initdata = {
-	.pm		= hackkit_uart_pm,
-};
-
-/**********************************************************************
- *  Static functions
- */
-
-static void __init hackkit_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(hackkit_io_desc, ARRAY_SIZE(hackkit_io_desc));
-
-	sa1100_register_uart_fns(&hackkit_port_fns);
-	sa1100_register_uart(0, 1);	/* com port */
-	sa1100_register_uart(1, 2);
-	sa1100_register_uart(2, 3);	/* radio module */
-
-	Ser1SDCR0 |= SDCR0_SUS;
-}
-
-/**
- *	hackkit_uart_pm - powermgmt callback function for system 3 UART
- *	@port: uart port structure
- *	@state: pm state
- *	@oldstate: old pm state
- *
- */
-static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
-{
-	/* TODO: switch on/off uart in powersave mode */
-}
-
-static struct mtd_partition hackkit_partitions[] = {
-	{
-		.name		= "BLOB",
-		.size		= 0x00040000,
-		.offset		= 0x00000000,
-		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name		= "config",
-		.size		= 0x00040000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "kernel",
-		.size		= 0x00100000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "initrd",
-		.size		= 0x00180000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "rootfs",
-		.size		= 0x700000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "data",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	}
-};
-
-static struct flash_platform_data hackkit_flash_data = {
-	.map_name	= "cfi_probe",
-	.parts		= hackkit_partitions,
-	.nr_parts	= ARRAY_SIZE(hackkit_partitions),
-};
-
-static struct resource hackkit_flash_resource =
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
-
-/* LEDs */
-struct gpio_led hackkit_gpio_leds[] = {
-	{
-		.name			= "hackkit:red",
-		.default_trigger	= "cpu0",
-		.gpio			= 22,
-	},
-	{
-		.name			= "hackkit:green",
-		.default_trigger	= "heartbeat",
-		.gpio			= 23,
-	},
-};
-
-static struct gpio_led_platform_data hackkit_gpio_led_info = {
-	.leds		= hackkit_gpio_leds,
-	.num_leds	= ARRAY_SIZE(hackkit_gpio_leds),
-};
-
-static struct platform_device hackkit_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &hackkit_gpio_led_info,
-	}
-};
-
-static void __init hackkit_init(void)
-{
-	sa11x0_register_mtd(&hackkit_flash_data, &hackkit_flash_resource, 1);
-	platform_device_register(&hackkit_leds);
-}
-
-/**********************************************************************
- *  Exported Functions
- */
-
-MACHINE_START(HACKKIT, "HackKit Cpu Board")
-	.atag_offset	= 0x100,
-	.map_io		= hackkit_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_time	= sa1100_timer_init,
-	.init_machine	= hackkit_init,
-	.init_late	= sa11x0_init_late,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-sa1100/include/mach/badge4.h b/arch/arm/mach-sa1100/include/mach/badge4.h
deleted file mode 100644
index 90e744a54ed5..000000000000
--- a/arch/arm/mach-sa1100/include/mach/badge4.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-sa1100/include/mach/badge4.h
- *
- *   Tim Connors <connors@hpl.hp.com>
- *   Christopher Hoover <ch@hpl.hp.com>
- *
- * Copyright (C) 2002 Hewlett-Packard Company
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "include <mach/hardware.h> instead"
-#endif
-
-#define BADGE4_SA1111_BASE		(0x48000000)
-
-/* GPIOs on the BadgePAD 4 */
-#define BADGE4_GPIO_INT_1111		GPIO_GPIO0   /* SA-1111 IRQ */
-
-#define BADGE4_GPIO_INT_VID		GPIO_GPIO1   /* Video expansion */
-#define BADGE4_GPIO_LGP2		GPIO_GPIO2   /* GPIO_LDD8 */
-#define BADGE4_GPIO_LGP3		GPIO_GPIO3   /* GPIO_LDD9 */
-#define BADGE4_GPIO_LGP4		GPIO_GPIO4   /* GPIO_LDD10 */
-#define BADGE4_GPIO_LGP5		GPIO_GPIO5   /* GPIO_LDD11 */
-#define BADGE4_GPIO_LGP6		GPIO_GPIO6   /* GPIO_LDD12 */
-#define BADGE4_GPIO_LGP7		GPIO_GPIO7   /* GPIO_LDD13 */
-#define BADGE4_GPIO_LGP8		GPIO_GPIO8   /* GPIO_LDD14 */
-#define BADGE4_GPIO_LGP9		GPIO_GPIO9   /* GPIO_LDD15 */
-#define BADGE4_GPIO_GPA_VID		GPIO_GPIO10  /* Video expansion */
-#define BADGE4_GPIO_GPB_VID		GPIO_GPIO11  /* Video expansion */
-#define BADGE4_GPIO_GPC_VID		GPIO_GPIO12  /* Video expansion */
-
-#define BADGE4_GPIO_UART_HS1		GPIO_GPIO13
-#define BADGE4_GPIO_UART_HS2		GPIO_GPIO14
-
-#define BADGE4_GPIO_MUXSEL0		GPIO_GPIO15
-#define BADGE4_GPIO_TESTPT_J7		GPIO_GPIO16
-
-#define BADGE4_GPIO_SDSDA		GPIO_GPIO17  /* SDRAM SPD Data */
-#define BADGE4_GPIO_SDSCL		GPIO_GPIO18  /* SDRAM SPD Clock */
-#define BADGE4_GPIO_SDTYP0		GPIO_GPIO19  /* SDRAM Type Control */
-#define BADGE4_GPIO_SDTYP1		GPIO_GPIO20  /* SDRAM Type Control */
-
-#define BADGE4_GPIO_BGNT_1111		GPIO_GPIO21  /* GPIO_MBGNT */
-#define BADGE4_GPIO_BREQ_1111		GPIO_GPIO22  /* GPIO_TREQA */
-
-#define BADGE4_GPIO_TESTPT_J6		GPIO_GPIO23
-
-#define BADGE4_GPIO_PCMEN5V		GPIO_GPIO24  /* 5V power */
-
-#define BADGE4_GPIO_SA1111_NRST		GPIO_GPIO25  /* SA-1111 nRESET */
-
-#define BADGE4_GPIO_TESTPT_J5		GPIO_GPIO26
-
-#define BADGE4_GPIO_CLK_1111		GPIO_GPIO27  /* GPIO_32_768kHz */
-
-/* Interrupts on the BadgePAD 4 */
-#define BADGE4_IRQ_GPIO_SA1111		IRQ_GPIO0    /* SA-1111 interrupt */
-
-
-/* PCM5ENV Usage tracking */
-
-#define BADGE4_5V_PCMCIA_SOCK0		(1<<0)
-#define BADGE4_5V_PCMCIA_SOCK1		(1<<1)
-#define BADGE4_5V_PCMCIA_SOCK(n)	(1<<(n))
-#define BADGE4_5V_USB			(1<<2)
-#define BADGE4_5V_INITIALLY		(1<<3)
-
-#ifndef __ASSEMBLY__
-extern void badge4_set_5V(unsigned subsystem, int on);
-#endif
diff --git a/arch/arm/mach-sa1100/include/mach/cerf.h b/arch/arm/mach-sa1100/include/mach/cerf.h
deleted file mode 100644
index 59c185ebd494..000000000000
--- a/arch/arm/mach-sa1100/include/mach/cerf.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-sa1100/include/mach/cerf.h
- *
- * Apr-2003 : Removed some old PDA crud [FB]
- */
-#ifndef _INCLUDE_CERF_H_
-#define _INCLUDE_CERF_H_
-
-
-#define CERF_ETH_IO			0xf0000000
-#define CERF_ETH_IRQ IRQ_GPIO26
-
-#define CERF_GPIO_CF_BVD2		19
-#define CERF_GPIO_CF_BVD1		20
-#define CERF_GPIO_CF_RESET		21
-#define CERF_GPIO_CF_IRQ		22
-#define CERF_GPIO_CF_CD			23
-
-#endif // _INCLUDE_CERF_H_
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index b7bc23ffd3c6..c95273c9567b 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -16,8 +16,6 @@
 
 #include "hardware.h" /* Gives GPIO_MAX */
 
-extern void locomolcd_power(int on);
-
 #define COLLIE_SCOOP_GPIO_BASE	(GPIO_MAX + 1)
 #define COLLIE_GPIO_CHARGE_ON	(COLLIE_SCOOP_GPIO_BASE + 0)
 #define COLLIE_SCP_DIAG_BOOT1	SCOOP_GPCR_PA12
diff --git a/arch/arm/mach-sa1100/include/mach/nanoengine.h b/arch/arm/mach-sa1100/include/mach/nanoengine.h
deleted file mode 100644
index 8d5ee1438956..000000000000
--- a/arch/arm/mach-sa1100/include/mach/nanoengine.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-sa1100/include/mach/nanoengine.h
- *
- * This file contains the hardware specific definitions for nanoEngine.
- * Only include this file from SA1100-specific files.
- *
- * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
- */
-#ifndef __ASM_ARCH_NANOENGINE_H
-#define __ASM_ARCH_NANOENGINE_H
-
-#include <mach/irqs.h>
-
-#define GPIO_PC_READY0	11 /* ready for socket 0 (active high)*/
-#define GPIO_PC_READY1	12 /* ready for socket 1 (active high) */
-#define GPIO_PC_CD0	13 /* detect for socket 0 (active low) */
-#define GPIO_PC_CD1	14 /* detect for socket 1 (active low) */
-#define GPIO_PC_RESET0	15 /* reset socket 0 */
-#define GPIO_PC_RESET1	16 /* reset socket 1 */
-
-#define NANOENGINE_IRQ_GPIO_PCI		IRQ_GPIO0
-#define NANOENGINE_IRQ_GPIO_PC_READY0	IRQ_GPIO11
-#define NANOENGINE_IRQ_GPIO_PC_READY1	IRQ_GPIO12
-#define NANOENGINE_IRQ_GPIO_PC_CD0	IRQ_GPIO13
-#define NANOENGINE_IRQ_GPIO_PC_CD1	IRQ_GPIO14
-
-/*
- * nanoEngine Memory Map:
- *
- * 0000.0000 - 003F.0000 -   4 MB Flash
- * C000.0000 - C1FF.FFFF -  32 MB SDRAM
- * 1860.0000 - 186F.FFFF -   1 MB Internal PCI Memory Read/Write
- * 18A1.0000 - 18A1.FFFF -  64 KB Internal PCI Config Space
- * 4000.0000 - 47FF.FFFF - 128 MB External Bus I/O - Multiplexed Mode
- * 4800.0000 - 4FFF.FFFF - 128 MB External Bus I/O - Non-Multiplexed Mode
- *
- */
-
-#define NANO_PCI_MEM_RW_PHYS		0x18600000
-#define NANO_PCI_MEM_RW_VIRT		0xf1000000
-#define NANO_PCI_MEM_RW_SIZE		SZ_1M
-#define NANO_PCI_CONFIG_SPACE_PHYS	0x18A10000
-#define NANO_PCI_CONFIG_SPACE_VIRT	0xf2000000
-#define NANO_PCI_CONFIG_SPACE_SIZE	SZ_64K
-
-#endif
-
diff --git a/arch/arm/mach-sa1100/include/mach/shannon.h b/arch/arm/mach-sa1100/include/mach/shannon.h
deleted file mode 100644
index d830375f329c..000000000000
--- a/arch/arm/mach-sa1100/include/mach/shannon.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _INCLUDE_SHANNON_H
-#define _INCLUDE_SHANNON_H
-
-/* taken from comp.os.inferno Tue, 12 Sep 2000 09:21:50 GMT,
- * written by <forsyth@vitanuova.com> */
-
-#define SHANNON_GPIO_SPI_FLASH		GPIO_GPIO (0)	/* Output - Driven low, enables SPI to flash */
-#define SHANNON_GPIO_SPI_DSP		GPIO_GPIO (1)	/* Output - Driven low, enables SPI to DSP */
-/* lcd lower = GPIO 2-9 */
-#define SHANNON_GPIO_SPI_OUTPUT		GPIO_GPIO (10)	/* Output - SPI output to DSP */
-#define SHANNON_GPIO_SPI_INPUT		GPIO_GPIO (11)	/* Input  - SPI input from DSP */
-#define SHANNON_GPIO_SPI_CLOCK		GPIO_GPIO (12)	/* Output - Clock for SPI */
-#define SHANNON_GPIO_SPI_FRAME		GPIO_GPIO (13)	/* Output - Frame marker - not used */
-#define SHANNON_GPIO_SPI_RTS		GPIO_GPIO (14)	/* Input  - SPI Ready to Send */
-#define SHANNON_IRQ_GPIO_SPI_RTS	IRQ_GPIO14
-#define SHANNON_GPIO_SPI_CTS		GPIO_GPIO (15)	/* Output - SPI Clear to Send */
-#define SHANNON_GPIO_IRQ_CODEC		GPIO_GPIO (16)	/* in, irq from ucb1200 */
-#define SHANNON_IRQ_GPIO_IRQ_CODEC	IRQ_GPIO16
-#define SHANNON_GPIO_DSP_RESET		GPIO_GPIO (17)	/* Output - Drive low to reset the DSP */
-#define SHANNON_GPIO_CODEC_RESET	GPIO_GPIO (18)	/* Output - Drive low to reset the UCB1x00 */
-#define SHANNON_GPIO_U3_RTS		GPIO_GPIO (19)	/* ?? */
-#define SHANNON_GPIO_U3_CTS		GPIO_GPIO (20)	/* ?? */
-#define SHANNON_GPIO_SENSE_12V		GPIO_GPIO (21)	/* Input, 12v flash unprotect detected */
-#define SHANNON_GPIO_DISP_EN		22		/* out */
-/* XXX GPIO 23 unaccounted for */
-#define SHANNON_GPIO_EJECT_0		24		/* in */
-#define SHANNON_GPIO_EJECT_1		25		/* in */
-#define SHANNON_GPIO_RDY_0		26		/* in */
-#define SHANNON_GPIO_RDY_1		27		/* in */
-
-/* MCP UCB codec GPIO pins... */
-
-#define SHANNON_UCB_GPIO_BACKLIGHT	9
-#define SHANNON_UCB_GPIO_BRIGHT_MASK  	7
-#define SHANNON_UCB_GPIO_BRIGHT		6
-#define SHANNON_UCB_GPIO_CONTRAST_MASK	0x3f
-#define SHANNON_UCB_GPIO_CONTRAST	0
-
-#endif
diff --git a/arch/arm/mach-sa1100/include/mach/simpad.h b/arch/arm/mach-sa1100/include/mach/simpad.h
deleted file mode 100644
index d53d680de3d9..000000000000
--- a/arch/arm/mach-sa1100/include/mach/simpad.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-sa1100/include/mach/simpad.h
- *
- * based of assabet.h same as HUW_Webpanel
- *
- * This file contains the hardware specific definitions for SIMpad
- *
- * 2001/05/14 Juergen Messerer <juergen.messerer@freesurf.ch>
- */
-
-#ifndef __ASM_ARCH_SIMPAD_H
-#define __ASM_ARCH_SIMPAD_H
-
-
-#define GPIO_UART1_RTS	GPIO_GPIO14
-#define GPIO_UART1_DTR	GPIO_GPIO7
-#define GPIO_UART1_CTS	GPIO_GPIO8
-#define GPIO_UART1_DCD	GPIO_GPIO23
-#define GPIO_UART1_DSR	GPIO_GPIO6
-
-#define GPIO_UART3_RTS	GPIO_GPIO12
-#define GPIO_UART3_DTR	GPIO_GPIO16
-#define GPIO_UART3_CTS	GPIO_GPIO13
-#define GPIO_UART3_DCD	GPIO_GPIO18
-#define GPIO_UART3_DSR	GPIO_GPIO17
-
-#define GPIO_POWER_BUTTON	GPIO_GPIO0
-#define GPIO_UCB1300_IRQ	GPIO_GPIO22	/* UCB GPIO and touchscreen */
-
-#define IRQ_UART1_CTS	IRQ_GPIO15
-#define IRQ_UART1_DCD	GPIO_GPIO23
-#define IRQ_UART1_DSR	GPIO_GPIO6
-#define IRQ_UART3_CTS	GPIO_GPIO13
-#define IRQ_UART3_DCD	GPIO_GPIO18
-#define IRQ_UART3_DSR	GPIO_GPIO17
-
-#define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22
-#define IRQ_GPIO_POWER_BUTTON IRQ_GPIO0
-
-
-/*---  PCMCIA  ---*/
-#define GPIO_CF_CD              24
-#define GPIO_CF_IRQ             1
-
-/*--- SmartCard ---*/
-#define GPIO_SMART_CARD		GPIO_GPIO10
-#define IRQ_GPIO_SMARD_CARD	IRQ_GPIO10
-
-/*--- ucb1x00 GPIO ---*/
-#define SIMPAD_UCB1X00_GPIO_BASE	(GPIO_MAX + 1)
-#define SIMPAD_UCB1X00_GPIO_PROG1	(SIMPAD_UCB1X00_GPIO_BASE)
-#define SIMPAD_UCB1X00_GPIO_PROG2	(SIMPAD_UCB1X00_GPIO_BASE + 1)
-#define SIMPAD_UCB1X00_GPIO_UP		(SIMPAD_UCB1X00_GPIO_BASE + 2)
-#define SIMPAD_UCB1X00_GPIO_DOWN	(SIMPAD_UCB1X00_GPIO_BASE + 3)
-#define SIMPAD_UCB1X00_GPIO_LEFT	(SIMPAD_UCB1X00_GPIO_BASE + 4)
-#define SIMPAD_UCB1X00_GPIO_RIGHT	(SIMPAD_UCB1X00_GPIO_BASE + 5)
-#define SIMPAD_UCB1X00_GPIO_6		(SIMPAD_UCB1X00_GPIO_BASE + 6)
-#define SIMPAD_UCB1X00_GPIO_7		(SIMPAD_UCB1X00_GPIO_BASE + 7)
-#define SIMPAD_UCB1X00_GPIO_HEADSET	(SIMPAD_UCB1X00_GPIO_BASE + 8)
-#define SIMPAD_UCB1X00_GPIO_SPEAKER	(SIMPAD_UCB1X00_GPIO_BASE + 9)
-
-/*--- CS3 Latch ---*/
-#define SIMPAD_CS3_GPIO_BASE		(GPIO_MAX + 11)
-#define SIMPAD_CS3_VCC_5V_EN		(SIMPAD_CS3_GPIO_BASE)
-#define SIMPAD_CS3_VCC_3V_EN		(SIMPAD_CS3_GPIO_BASE + 1)
-#define SIMPAD_CS3_EN1			(SIMPAD_CS3_GPIO_BASE + 2)
-#define SIMPAD_CS3_EN0			(SIMPAD_CS3_GPIO_BASE + 3)
-#define SIMPAD_CS3_DISPLAY_ON		(SIMPAD_CS3_GPIO_BASE + 4)
-#define SIMPAD_CS3_PCMCIA_BUFF_DIS	(SIMPAD_CS3_GPIO_BASE + 5)
-#define SIMPAD_CS3_MQ_RESET		(SIMPAD_CS3_GPIO_BASE + 6)
-#define SIMPAD_CS3_PCMCIA_RESET		(SIMPAD_CS3_GPIO_BASE + 7)
-#define SIMPAD_CS3_DECT_POWER_ON	(SIMPAD_CS3_GPIO_BASE + 8)
-#define SIMPAD_CS3_IRDA_SD		(SIMPAD_CS3_GPIO_BASE + 9)
-#define SIMPAD_CS3_RS232_ON		(SIMPAD_CS3_GPIO_BASE + 10)
-#define SIMPAD_CS3_SD_MEDIAQ		(SIMPAD_CS3_GPIO_BASE + 11)
-#define SIMPAD_CS3_LED2_ON		(SIMPAD_CS3_GPIO_BASE + 12)
-#define SIMPAD_CS3_IRDA_MODE		(SIMPAD_CS3_GPIO_BASE + 13)
-#define SIMPAD_CS3_ENABLE_5V		(SIMPAD_CS3_GPIO_BASE + 14)
-#define SIMPAD_CS3_RESET_SIMCARD	(SIMPAD_CS3_GPIO_BASE + 15)
-
-#define SIMPAD_CS3_PCMCIA_BVD1		(SIMPAD_CS3_GPIO_BASE + 16)
-#define SIMPAD_CS3_PCMCIA_BVD2		(SIMPAD_CS3_GPIO_BASE + 17)
-#define SIMPAD_CS3_PCMCIA_VS1		(SIMPAD_CS3_GPIO_BASE + 18)
-#define SIMPAD_CS3_PCMCIA_VS2		(SIMPAD_CS3_GPIO_BASE + 19)
-#define SIMPAD_CS3_LOCK_IND		(SIMPAD_CS3_GPIO_BASE + 20)
-#define SIMPAD_CS3_CHARGING_STATE	(SIMPAD_CS3_GPIO_BASE + 21)
-#define SIMPAD_CS3_PCMCIA_SHORT		(SIMPAD_CS3_GPIO_BASE + 22)
-#define SIMPAD_CS3_GPIO_23		(SIMPAD_CS3_GPIO_BASE + 23)
-
-#define CS3_BASE        IOMEM(0xf1000000)
-
-long simpad_get_cs3_ro(void);
-long simpad_get_cs3_shadow(void);
-void simpad_set_cs3_bit(int value);
-void simpad_clear_cs3_bit(int value);
-
-#define VCC_5V_EN	0x0001 /* For 5V PCMCIA */
-#define VCC_3V_EN	0x0002 /* FOR 3.3V PCMCIA */
-#define EN1		0x0004 /* This is only for EPROM's */
-#define EN0		0x0008 /* Both should be enable for 3.3V or 5V */
-#define DISPLAY_ON	0x0010
-#define PCMCIA_BUFF_DIS	0x0020
-#define MQ_RESET	0x0040
-#define PCMCIA_RESET	0x0080
-#define DECT_POWER_ON	0x0100
-#define IRDA_SD		0x0200 /* Shutdown for powersave */
-#define RS232_ON	0x0400
-#define SD_MEDIAQ	0x0800 /* Shutdown for powersave */
-#define LED2_ON		0x1000
-#define IRDA_MODE	0x2000 /* Fast/Slow IrDA mode */
-#define ENABLE_5V	0x4000 /* Enable 5V circuit */
-#define RESET_SIMCARD	0x8000
-
-#define PCMCIA_BVD1	0x01
-#define PCMCIA_BVD2	0x02
-#define PCMCIA_VS1	0x04
-#define PCMCIA_VS2	0x08
-#define LOCK_IND	0x10
-#define CHARGING_STATE	0x20
-#define PCMCIA_SHORT	0x40
-
-/*--- Battery ---*/
-struct simpad_battery {
-	unsigned char ac_status;	/* line connected yes/no */
-	unsigned char status;		/* battery loading yes/no */
-	unsigned char percentage;	/* percentage loaded */
-	unsigned short life;		/* life till empty */
-};
-
-/* These should match the apm_bios.h definitions */
-#define SIMPAD_AC_STATUS_AC_OFFLINE      0x00
-#define SIMPAD_AC_STATUS_AC_ONLINE       0x01
-#define SIMPAD_AC_STATUS_AC_BACKUP       0x02   /* What does this mean? */
-#define SIMPAD_AC_STATUS_AC_UNKNOWN      0xff
-
-/* These bitfields are rarely "or'd" together */
-#define SIMPAD_BATT_STATUS_HIGH          0x01
-#define SIMPAD_BATT_STATUS_LOW           0x02
-#define SIMPAD_BATT_STATUS_CRITICAL      0x04
-#define SIMPAD_BATT_STATUS_CHARGING      0x08
-#define SIMPAD_BATT_STATUS_CHARGE_MAIN   0x10
-#define SIMPAD_BATT_STATUS_DEAD          0x20   /* Battery will not charge */
-#define SIMPAD_BATT_NOT_INSTALLED        0x20   /* For expansion pack batteries */
-#define SIMPAD_BATT_STATUS_FULL          0x40   /* Battery fully charged (and connected to AC) */
-#define SIMPAD_BATT_STATUS_NOBATT        0x80
-#define SIMPAD_BATT_STATUS_UNKNOWN       0xff
-
-extern int simpad_get_battery(struct simpad_battery* );
-
-#endif // __ASM_ARCH_SIMPAD_H
-
-
-
-
-
-
-
-
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 1dbe98948ce3..d94810217095 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/**
+/*
  *  arch/arm/mac-sa1100/jornada720_ssp.c
  *
  *  Copyright (C) 2006/2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
@@ -26,6 +26,7 @@ static unsigned long jornada_ssp_flags;
 
 /**
  * jornada_ssp_reverse - reverses input byte
+ * @byte: input byte to reverse
  *
  * we need to reverse all data we receive from the mcu due to its physical location
  * returns : 01110111 -> 11101110
@@ -46,6 +47,7 @@ EXPORT_SYMBOL(jornada_ssp_reverse);
 
 /**
  * jornada_ssp_byte - waits for ready ssp bus and sends byte
+ * @byte: input byte to transmit
  *
  * waits for fifo buffer to clear and then transmits, if it doesn't then we will
  * timeout after <timeout> rounds. Needs mcu running before its called.
@@ -77,6 +79,7 @@ EXPORT_SYMBOL(jornada_ssp_byte);
 
 /**
  * jornada_ssp_inout - decide if input is command or trading byte
+ * @byte: input byte to send (may be %TXDUMMY)
  *
  * returns : (jornada_ssp_byte(byte)) on success
  *         : %-ETIMEDOUT on timeout failure
@@ -175,18 +178,17 @@ static int jornada_ssp_probe(struct platform_device *dev)
 	return 0;
 };
 
-static int jornada_ssp_remove(struct platform_device *dev)
+static void jornada_ssp_remove(struct platform_device *dev)
 {
 	/* Note that this doesn't actually remove the driver, since theres nothing to remove
 	 * It just makes sure everything is turned off */
 	GPSR = GPIO_GPIO25;
 	ssp_exit();
-	return 0;
 };
 
 struct platform_driver jornadassp_driver = {
 	.probe	= jornada_ssp_probe,
-	.remove	= jornada_ssp_remove,
+	.remove = jornada_ssp_remove,
 	.driver	= {
 		.name	= "jornada_ssp",
 	},
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
deleted file mode 100644
index e3a0279750e3..000000000000
--- a/arch/arm/mach-sa1100/lart.c
+++ /dev/null
@@ -1,177 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-sa1100/lart.c
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/tty.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#include <video/sa1100fb.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <linux/platform_data/mfd-mcp-sa11x0.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-static struct mcp_plat_data lart_mcp_data = {
-	.mccr0		= MCCR0_ADM,
-	.sclk_rate	= 11981000,
-};
-
-#ifdef LART_GREY_LCD
-static struct sa1100fb_mach_info lart_grey_info = {
-	.pixclock	= 150000,	.bpp		= 4,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 1,		.vsync_len	= 1,
-	.left_margin	= 4,		.upper_margin	= 0,
-	.right_margin	= 2,		.lower_margin	= 0,
-
-	.cmap_greyscale	= 1,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#ifdef LART_COLOR_LCD
-static struct sa1100fb_mach_info lart_color_info = {
-	.pixclock	= 150000,	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 2,		.vsync_len	= 3,
-	.left_margin	= 69,		.upper_margin	= 14,
-	.right_margin	= 8,		.lower_margin	= 4,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#ifdef LART_VIDEO_OUT
-static struct sa1100fb_mach_info lart_video_info = {
-	.pixclock	= 39721,	.bpp		= 16,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 95,		.vsync_len	= 2,
-	.left_margin	= 40,		.upper_margin	= 32,
-	.right_margin	= 24,		.lower_margin	= 11,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-
-#ifdef LART_KIT01_LCD
-static struct sa1100fb_mach_info lart_kit01_info = {
-	.pixclock	= 63291,	.bpp		= 16,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 64,		.vsync_len	= 3,
-	.left_margin	= 122,		.upper_margin	= 45,
-	.right_margin	= 10,		.lower_margin	= 10,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg
-};
-#endif
-
-static void __init lart_init(void)
-{
-	struct sa1100fb_mach_info *inf = NULL;
-
-#ifdef LART_GREY_LCD
-	inf = &lart_grey_info;
-#endif
-#ifdef LART_COLOR_LCD
-	inf = &lart_color_info;
-#endif
-#ifdef LART_VIDEO_OUT
-	inf = &lart_video_info;
-#endif
-#ifdef LART_KIT01_LCD
-	inf = &lart_kit01_info;
-#endif
-
-	if (inf)
-		sa11x0_register_lcd(inf);
-
-	sa11x0_ppc_configure_mcp();
-	sa11x0_register_mcp(&lart_mcp_data);
-}
-
-static struct map_desc lart_io_desc[] __initdata = {
-	{	/* main flash memory */
-		.virtual	=  0xe8000000,
-		.pfn		= __phys_to_pfn(0x00000000),
-		.length		= 0x00400000,
-		.type		= MT_DEVICE
-	}, {	/* main flash, alternative location */
-		.virtual	=  0xec000000,
-		.pfn		= __phys_to_pfn(0x08000000),
-		.length		= 0x00400000,
-		.type		= MT_DEVICE
-	}
-};
-
-/* LEDs */
-struct gpio_led lart_gpio_leds[] = {
-	{
-		.name			= "lart:red",
-		.default_trigger	= "cpu0",
-		.gpio			= 23,
-	},
-};
-
-static struct gpio_led_platform_data lart_gpio_led_info = {
-	.leds		= lart_gpio_leds,
-	.num_leds	= ARRAY_SIZE(lart_gpio_leds),
-};
-
-static struct platform_device lart_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &lart_gpio_led_info,
-	}
-};
-static void __init lart_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(lart_io_desc, ARRAY_SIZE(lart_io_desc));
-
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 1);
-	sa1100_register_uart(2, 2);
-
-	GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
-	GPDR |= GPIO_UART_TXD;
-	GPDR &= ~GPIO_UART_RXD;
-	PPAR |= PPAR_UPR;
-
-	platform_device_register(&lart_leds);
-}
-
-MACHINE_START(LART, "LART")
-	.atag_offset	= 0x100,
-	.map_io		= lart_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_machine	= lart_init,
-	.init_late	= sa11x0_init_late,
-	.init_time	= sa1100_timer_init,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
deleted file mode 100644
index f6c9c19c39fb..000000000000
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-sa1100/nanoengine.c
- *
- * Bright Star Engineering's nanoEngine board init code.
- *
- * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
- */
-
-#include <linux/init.h>
-#include <linux/gpio/machine.h>
-#include <linux/kernel.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/root_dev.h>
-
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/nanoengine.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-/* Flash bank 0 */
-static struct mtd_partition nanoengine_partitions[] = {
-	{
-		.name	= "nanoEngine boot firmware and parameter table",
-		.size		= 0x00010000,  /* 32K */
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel/initrd reserved",
-		.size		= 0x002f0000,
-		.offset		= 0x00010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "experimental filesystem allocation",
-		.size		= 0x00100000,
-		.offset		= 0x00300000,
-		.mask_flags	= MTD_WRITEABLE,
-	}
-};
-
-static struct flash_platform_data nanoengine_flash_data = {
-	.map_name	= "jedec_probe",
-	.parts		= nanoengine_partitions,
-	.nr_parts	= ARRAY_SIZE(nanoengine_partitions),
-};
-
-static struct resource nanoengine_flash_resources[] = {
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
-	DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M),
-};
-
-static struct map_desc nanoengine_io_desc[] __initdata = {
-	{
-		/* System Registers */
-		.virtual	= 0xf0000000,
-		.pfn		= __phys_to_pfn(0x10000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}, {
-		/* Internal PCI Memory Read/Write */
-		.virtual	= NANO_PCI_MEM_RW_VIRT,
-		.pfn		= __phys_to_pfn(NANO_PCI_MEM_RW_PHYS),
-		.length		= NANO_PCI_MEM_RW_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		/* Internal PCI Config Space */
-		.virtual	= NANO_PCI_CONFIG_SPACE_VIRT,
-		.pfn		= __phys_to_pfn(NANO_PCI_CONFIG_SPACE_PHYS),
-		.length		= NANO_PCI_CONFIG_SPACE_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init nanoengine_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(nanoengine_io_desc, ARRAY_SIZE(nanoengine_io_desc));
-
-	sa1100_register_uart(0, 1);
-	sa1100_register_uart(1, 2);
-	sa1100_register_uart(2, 3);
-	Ser1SDCR0 |= SDCR0_UART;
-	/* disable IRDA -- UART2 is used as a normal serial port */
-	Ser2UTCR4 = 0;
-	Ser2HSCR0 = 0;
-}
-
-static struct gpiod_lookup_table nanoengine_pcmcia0_gpio_table = {
-	.dev_id = "sa11x0-pcmcia.0",
-	.table = {
-		GPIO_LOOKUP("gpio", 11, "ready", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio", 13, "detect", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio", 15, "reset", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table nanoengine_pcmcia1_gpio_table = {
-	.dev_id = "sa11x0-pcmcia.1",
-	.table = {
-		GPIO_LOOKUP("gpio", 12, "ready", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio", 14, "detect", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio", 16, "reset", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init nanoengine_init(void)
-{
-	sa11x0_register_pcmcia(0, &nanoengine_pcmcia0_gpio_table);
-	sa11x0_register_pcmcia(1, &nanoengine_pcmcia1_gpio_table);
-	sa11x0_register_mtd(&nanoengine_flash_data, nanoengine_flash_resources,
-		ARRAY_SIZE(nanoengine_flash_resources));
-}
-
-MACHINE_START(NANOENGINE, "BSE nanoEngine")
-	.atag_offset	= 0x100,
-	.map_io		= nanoengine_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_time	= sa1100_timer_init,
-	.init_machine	= nanoengine_init,
-	.init_late	= sa11x0_init_late,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 6876bc1e33b4..88fe79f0a4ed 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -376,7 +376,7 @@ static int neponset_probe(struct platform_device *dev)
 	return ret;
 }
 
-static int neponset_remove(struct platform_device *dev)
+static void neponset_remove(struct platform_device *dev)
 {
 	struct neponset_drvdata *d = platform_get_drvdata(dev);
 	int irq = platform_get_irq(dev, 0);
@@ -395,8 +395,6 @@ static int neponset_remove(struct platform_device *dev)
 	nep = NULL;
 	iounmap(d->base);
 	kfree(d);
-
-	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c
deleted file mode 100644
index 0791d11ff4d4..000000000000
--- a/arch/arm/mach-sa1100/pci-nanoengine.c
+++ /dev/null
@@ -1,191 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * linux/arch/arm/mach-sa1100/pci-nanoengine.c
- *
- * PCI functions for BSE nanoEngine PCI
- *
- * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
- */
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#include <mach/nanoengine.h>
-#include <mach/hardware.h>
-
-static void __iomem *nanoengine_pci_map_bus(struct pci_bus *bus,
-					    unsigned int devfn, int where)
-{
-	if (bus->number != 0 || (devfn >> 3) != 0)
-		return NULL;
-
-	return (void __iomem *)NANO_PCI_CONFIG_SPACE_VIRT +
-		((bus->number << 16) | (devfn << 8) | (where & ~3));
-}
-
-static struct pci_ops pci_nano_ops = {
-	.map_bus = nanoengine_pci_map_bus,
-	.read	= pci_generic_config_read32,
-	.write	= pci_generic_config_write32,
-};
-
-static int __init pci_nanoengine_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	return NANOENGINE_IRQ_GPIO_PCI;
-}
-
-static struct resource pci_io_ports =
-	DEFINE_RES_IO_NAMED(0x400, 0x400, "PCI IO");
-
-static struct resource pci_non_prefetchable_memory = {
-	.name	= "PCI non-prefetchable",
-	.start	= NANO_PCI_MEM_RW_PHYS,
-	/* nanoEngine documentation says there is a 1 Megabyte window here,
-	 * but PCI reports just 128 + 8 kbytes. */
-	.end	= NANO_PCI_MEM_RW_PHYS + NANO_PCI_MEM_RW_SIZE - 1,
-/*	.end	= NANO_PCI_MEM_RW_PHYS + SZ_128K + SZ_8K - 1,*/
-	.flags	= IORESOURCE_MEM,
-};
-
-/*
- * nanoEngine PCI reports 1 Megabyte of prefetchable memory, but it
- * overlaps with previously defined memory.
- *
- * Here is what happens:
- *
-# dmesg
-...
-pci 0000:00:00.0: [8086:1209] type 0 class 0x000200
-pci 0000:00:00.0: reg 10: [mem 0x00021000-0x00021fff]
-pci 0000:00:00.0: reg 14: [io  0x0000-0x003f]
-pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0001ffff]
-pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
-pci 0000:00:00.0: supports D1 D2
-pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
-pci 0000:00:00.0: PME# disabled
-PCI: bus0: Fast back to back transfers enabled
-pci 0000:00:00.0: BAR 6: can't assign mem pref (size 0x100000)
-pci 0000:00:00.0: BAR 2: assigned [mem 0x18600000-0x1861ffff]
-pci 0000:00:00.0: BAR 2: set to [mem 0x18600000-0x1861ffff] (PCI address [0x0-0x1ffff])
-pci 0000:00:00.0: BAR 0: assigned [mem 0x18620000-0x18620fff]
-pci 0000:00:00.0: BAR 0: set to [mem 0x18620000-0x18620fff] (PCI address [0x20000-0x20fff])
-pci 0000:00:00.0: BAR 1: assigned [io  0x0400-0x043f]
-pci 0000:00:00.0: BAR 1: set to [io  0x0400-0x043f] (PCI address [0x0-0x3f])
- *
- * On the other hand, if we do not request the prefetchable memory resource,
- * linux will alloc it first and the two non-prefetchable memory areas that
- * are our real interest will not be mapped. So we choose to map it to an
- * unused area. It gets recognized as expansion ROM, but becomes disabled.
- *
- * Here is what happens then:
- *
-# dmesg
-...
-pci 0000:00:00.0: [8086:1209] type 0 class 0x000200
-pci 0000:00:00.0: reg 10: [mem 0x00021000-0x00021fff]
-pci 0000:00:00.0: reg 14: [io  0x0000-0x003f]
-pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0001ffff]
-pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
-pci 0000:00:00.0: supports D1 D2
-pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
-pci 0000:00:00.0: PME# disabled
-PCI: bus0: Fast back to back transfers enabled
-pci 0000:00:00.0: BAR 6: assigned [mem 0x78000000-0x780fffff pref]
-pci 0000:00:00.0: BAR 2: assigned [mem 0x18600000-0x1861ffff]
-pci 0000:00:00.0: BAR 2: set to [mem 0x18600000-0x1861ffff] (PCI address [0x0-0x1ffff])
-pci 0000:00:00.0: BAR 0: assigned [mem 0x18620000-0x18620fff]
-pci 0000:00:00.0: BAR 0: set to [mem 0x18620000-0x18620fff] (PCI address [0x20000-0x20fff])
-pci 0000:00:00.0: BAR 1: assigned [io  0x0400-0x043f]
-pci 0000:00:00.0: BAR 1: set to [io  0x0400-0x043f] (PCI address [0x0-0x3f])
-
-# lspci -vv -s 0000:00:00.0
-00:00.0 Class 0200: Device 8086:1209 (rev 09)
-        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
-        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR+ INTx-
-        Latency: 0 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
-        Interrupt: pin A routed to IRQ 0
-        Region 0: Memory at 18620000 (32-bit, non-prefetchable) [size=4K]
-        Region 1: I/O ports at 0400 [size=64]
-        Region 2: [virtual] Memory at 18600000 (32-bit, non-prefetchable) [size=128K]
-        [virtual] Expansion ROM at 78000000 [disabled] [size=1M]
-        Capabilities: [dc] Power Management version 2
-                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
-                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
-        Kernel driver in use: e100
-        Kernel modules: e100
- *
- */
-static struct resource pci_prefetchable_memory = {
-	.name	= "PCI prefetchable",
-	.start	= 0x78000000,
-	.end	= 0x78000000 + NANO_PCI_MEM_RW_SIZE - 1,
-	.flags	= IORESOURCE_MEM  | IORESOURCE_PREFETCH,
-};
-
-static int __init pci_nanoengine_setup_resources(struct pci_sys_data *sys)
-{
-	if (request_resource(&ioport_resource, &pci_io_ports)) {
-		printk(KERN_ERR "PCI: unable to allocate io port region\n");
-		return -EBUSY;
-	}
-	if (request_resource(&iomem_resource, &pci_non_prefetchable_memory)) {
-		release_resource(&pci_io_ports);
-		printk(KERN_ERR "PCI: unable to allocate non prefetchable\n");
-		return -EBUSY;
-	}
-	if (request_resource(&iomem_resource, &pci_prefetchable_memory)) {
-		release_resource(&pci_io_ports);
-		release_resource(&pci_non_prefetchable_memory);
-		printk(KERN_ERR "PCI: unable to allocate prefetchable\n");
-		return -EBUSY;
-	}
-	pci_add_resource_offset(&sys->resources, &pci_io_ports, sys->io_offset);
-	pci_add_resource_offset(&sys->resources,
-				&pci_non_prefetchable_memory, sys->mem_offset);
-	pci_add_resource_offset(&sys->resources,
-				&pci_prefetchable_memory, sys->mem_offset);
-
-	return 1;
-}
-
-int __init pci_nanoengine_setup(int nr, struct pci_sys_data *sys)
-{
-	int ret = 0;
-
-	pcibios_min_io = 0;
-	pcibios_min_mem = 0;
-
-	if (nr == 0) {
-		sys->mem_offset = NANO_PCI_MEM_RW_PHYS;
-		sys->io_offset = 0x400;
-		ret = pci_nanoengine_setup_resources(sys);
-		/* Enable alternate memory bus master mode, see
-		 * "Intel StrongARM SA1110 Developer's Manual",
-		 * section 10.8, "Alternate Memory Bus Master Mode". */
-		GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
-		GAFR |= GPIO_MBGNT | GPIO_MBREQ;
-		TUCR |= TUCR_MBGPIO;
-	}
-
-	return ret;
-}
-
-static struct hw_pci nanoengine_pci __initdata = {
-	.map_irq		= pci_nanoengine_map_irq,
-	.nr_controllers		= 1,
-	.ops			= &pci_nano_ops,
-	.setup			= pci_nanoengine_setup,
-};
-
-static int __init nanoengine_pci_init(void)
-{
-	if (machine_is_nanoengine())
-		pci_common_init(&nanoengine_pci);
-	return 0;
-}
-
-subsys_initcall(nanoengine_pci_init);
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
deleted file mode 100644
index b2b0c9fc18f7..000000000000
--- a/arch/arm/mach-sa1100/pleb.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-sa1100/pleb.c
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/ioport.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/mtd/partitions.h>
-#include <linux/smc91x.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-
-/*
- * Ethernet IRQ mappings
- */
-
-#define PLEB_ETH0_P		(0x20000300)	/* Ethernet 0 in PCMCIA0 IO */
-#define PLEB_ETH0_V		(0xf6000300)
-
-#define GPIO_ETH0_IRQ		GPIO_GPIO(21)
-#define GPIO_ETH0_EN		GPIO_GPIO(26)
-
-#define IRQ_GPIO_ETH0_IRQ	IRQ_GPIO21
-
-static struct resource smc91x_resources[] = {
-	[0] = DEFINE_RES_MEM(PLEB_ETH0_P, 0x04000000),
-#if 0 /* Autoprobe instead, to get rising/falling edge characteristic right */
-	[1] = DEFINE_RES_IRQ(IRQ_GPIO_ETH0_IRQ),
-#endif
-};
-
-static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_16BIT | SMC91X_USE_8BIT | SMC91X_NOWAIT,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev = {
-		.platform_data  = &smc91x_platdata,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&smc91x_device,
-};
-
-
-/*
- * Pleb's memory map
- * has flash memory (typically 4 or 8 meg) selected by
- * the two SA1100 lowest chip select outputs.
- */
-static struct resource pleb_flash_resources[] = {
-	[0] = DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_8M),
-	[1] = DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_8M),
-};
-
-
-static struct mtd_partition pleb_partitions[] = {
-	{
-		.name		= "blob",
-		.offset		= 0,
-		.size		= 0x00020000,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 0x000e0000,
-	}, {
-		.name		= "rootfs",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 0x00300000,
-	}
-};
-
-
-static struct flash_platform_data pleb_flash_data = {
-	.map_name = "cfi_probe",
-	.parts = pleb_partitions,
-	.nr_parts = ARRAY_SIZE(pleb_partitions),
-};
-
-
-static void __init pleb_init(void)
-{
-	sa11x0_register_mtd(&pleb_flash_data, pleb_flash_resources,
-			      ARRAY_SIZE(pleb_flash_resources));
-
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-
-static void __init pleb_map_io(void)
-{
-	sa1100_map_io();
-
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 1);
-
-	GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
-	GPDR |= GPIO_UART_TXD;
-	GPDR &= ~GPIO_UART_RXD;
-	PPAR |= PPAR_UPR;
-
-	/*
-	 * Fix expansion memory timing for network card
-	 */
-	MECR = ((2<<10) | (2<<5) | (2<<0));
-
-	/*
-	 * Enable the SMC ethernet controller
-	 */
-	GPDR |= GPIO_ETH0_EN;	/* set to output */
-	GPCR  = GPIO_ETH0_EN;	/* clear MCLK (enable smc) */
-
-	GPDR &= ~GPIO_ETH0_IRQ;
-
-	irq_set_irq_type(GPIO_ETH0_IRQ, IRQ_TYPE_EDGE_FALLING);
-}
-
-MACHINE_START(PLEB, "PLEB")
-	.map_io		= pleb_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_time	= sa1100_timer_init,
-	.init_machine   = pleb_init,
-	.init_late	= sa11x0_init_late,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 9a7079f565bd..9495fc109baa 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -29,10 +29,12 @@
 #include <linux/time.h>
 
 #include <mach/hardware.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/suspend.h>
 #include <asm/mach/time.h>
 
+#include "generic.h"
+
 extern int sa1100_finish_suspend(unsigned long);
 
 #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
deleted file mode 100644
index 351f891b4842..000000000000
--- a/arch/arm/mach-sa1100/shannon.c
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-sa1100/shannon.c
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/gpio/machine.h>
-#include <linux/kernel.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/tty.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <video/sa1100fb.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <linux/platform_data/mfd-mcp-sa11x0.h>
-#include <mach/shannon.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-static struct mtd_partition shannon_partitions[] = {
-	{
-		.name		= "BLOB boot loader",
-		.offset		= 0,
-		.size		= 0x20000
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 0xe0000
-	},
-	{
-		.name		= "initrd",
-		.offset		= MTDPART_OFS_APPEND,	
-		.size		= MTDPART_SIZ_FULL
-	}
-};
-
-static struct flash_platform_data shannon_flash_data = {
-	.map_name	= "cfi_probe",
-	.parts		= shannon_partitions,
-	.nr_parts	= ARRAY_SIZE(shannon_partitions),
-};
-
-static struct resource shannon_flash_resource =
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_4M);
-
-static struct mcp_plat_data shannon_mcp_data = {
-	.mccr0		= MCCR0_ADM,
-	.sclk_rate	= 11981000,
-};
-
-static struct sa1100fb_mach_info shannon_lcd_info = {
-	.pixclock	= 152500,	.bpp		= 8,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 4,		.vsync_len	= 3,
-	.left_margin	= 2,		.upper_margin	= 0,
-	.right_margin	= 1,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Dual | LCCR0_Pas,
-	.lccr3		= LCCR3_ACBsDiv(512),
-};
-
-static struct gpiod_lookup_table shannon_pcmcia0_gpio_table = {
-	.dev_id = "sa11x0-pcmcia.0",
-	.table = {
-		GPIO_LOOKUP("gpio", 24, "detect", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio", 26, "ready", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table shannon_pcmcia1_gpio_table = {
-	.dev_id = "sa11x0-pcmcia.1",
-	.table = {
-		GPIO_LOOKUP("gpio", 25, "detect", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio", 27, "ready", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct regulator_consumer_supply shannon_cf_vcc_consumers[] = {
-	REGULATOR_SUPPLY("vcc", "sa11x0-pcmcia.0"),
-	REGULATOR_SUPPLY("vcc", "sa11x0-pcmcia.1"),
-};
-
-static struct fixed_voltage_config shannon_cf_vcc_pdata __initdata = {
-	.supply_name = "cf-power",
-	.microvolts = 3300000,
-	.enabled_at_boot = 1,
-};
-
-static struct gpiod_lookup_table shannon_display_gpio_table = {
-	.dev_id = "sa11x0-fb",
-	.table = {
-		GPIO_LOOKUP("gpio", 22, "shannon-lcden", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init shannon_init(void)
-{
-	sa11x0_register_fixed_regulator(0, &shannon_cf_vcc_pdata,
-					shannon_cf_vcc_consumers,
-					ARRAY_SIZE(shannon_cf_vcc_consumers),
-					false);
-	sa11x0_register_pcmcia(0, &shannon_pcmcia0_gpio_table);
-	sa11x0_register_pcmcia(1, &shannon_pcmcia1_gpio_table);
-	sa11x0_ppc_configure_mcp();
-	gpiod_add_lookup_table(&shannon_display_gpio_table);
-	sa11x0_register_lcd(&shannon_lcd_info);
-	sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
-	sa11x0_register_mcp(&shannon_mcp_data);
-}
-
-static void __init shannon_map_io(void)
-{
-	sa1100_map_io();
-
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 1);
-
-	Ser1SDCR0 |= SDCR0_SUS;
-	GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
-	GPDR |= GPIO_UART_TXD | SHANNON_GPIO_CODEC_RESET;
-	GPDR &= ~GPIO_UART_RXD;
-	PPAR |= PPAR_UPR;
-
-	/* reset the codec */
-	GPCR = SHANNON_GPIO_CODEC_RESET;
-	GPSR = SHANNON_GPIO_CODEC_RESET;
-}
-
-MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
-	.atag_offset	= 0x100,
-	.map_io		= shannon_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_time	= sa1100_timer_init,
-	.init_machine	= shannon_init,
-	.init_late	= sa11x0_init_late,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
deleted file mode 100644
index c7fb9a73e4c5..000000000000
--- a/arch/arm/mach-sa1100/simpad.c
+++ /dev/null
@@ -1,423 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-sa1100/simpad.c
- */
-
-#include <linux/module.h>
-#include <linux/gpio/machine.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/proc_fs.h>
-#include <linux/string.h>
-#include <linux/pm.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/ucb1x00.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-#include <linux/gpio/driver.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/irq.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <linux/platform_data/mfd-mcp-sa11x0.h>
-#include <mach/simpad.h>
-#include <mach/irqs.h>
-
-#include <linux/serial_core.h>
-#include <linux/ioport.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <linux/platform_data/i2c-gpio.h>
-
-#include "generic.h"
-
-/*
- * CS3 support
- */
-
-static long cs3_shadow;
-static spinlock_t cs3_lock;
-static struct gpio_chip cs3_gpio;
-
-long simpad_get_cs3_ro(void)
-{
-	return readl(CS3_BASE);
-}
-EXPORT_SYMBOL(simpad_get_cs3_ro);
-
-long simpad_get_cs3_shadow(void)
-{
-	return cs3_shadow;
-}
-EXPORT_SYMBOL(simpad_get_cs3_shadow);
-
-static void __simpad_write_cs3(void)
-{
-	writel(cs3_shadow, CS3_BASE);
-}
-
-void simpad_set_cs3_bit(int value)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cs3_lock, flags);
-	cs3_shadow |= value;
-	__simpad_write_cs3();
-	spin_unlock_irqrestore(&cs3_lock, flags);
-}
-EXPORT_SYMBOL(simpad_set_cs3_bit);
-
-void simpad_clear_cs3_bit(int value)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cs3_lock, flags);
-	cs3_shadow &= ~value;
-	__simpad_write_cs3();
-	spin_unlock_irqrestore(&cs3_lock, flags);
-}
-EXPORT_SYMBOL(simpad_clear_cs3_bit);
-
-static void cs3_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	if (offset > 15)
-		return;
-	if (value)
-		simpad_set_cs3_bit(1 << offset);
-	else
-		simpad_clear_cs3_bit(1 << offset);
-};
-
-static int cs3_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	if (offset > 15)
-		return !!(simpad_get_cs3_ro() & (1 << (offset - 16)));
-	return !!(simpad_get_cs3_shadow() & (1 << offset));
-};
-
-static int cs3_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	if (offset > 15)
-		return 0;
-	return -EINVAL;
-};
-
-static int cs3_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
-	int value)
-{
-	if (offset > 15)
-		return -EINVAL;
-	cs3_gpio_set(chip, offset, value);
-	return 0;
-};
-
-static struct map_desc simpad_io_desc[] __initdata = {
-	{	/* MQ200 */
-		.virtual	=  0xf2800000,
-		.pfn		= __phys_to_pfn(0x4b800000),
-		.length		= 0x00800000,
-		.type		= MT_DEVICE
-	}, {	/* Simpad CS3 */
-		.virtual	= (unsigned long)CS3_BASE,
-		.pfn		= __phys_to_pfn(SA1100_CS3_PHYS),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	},
-};
-
-
-static void simpad_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
-{
-	if (port->mapbase == (u_int)&Ser1UTCR0) {
-		if (state)
-		{
-			simpad_clear_cs3_bit(RS232_ON);
-			simpad_clear_cs3_bit(DECT_POWER_ON);
-		}else
-		{
-			simpad_set_cs3_bit(RS232_ON);
-			simpad_set_cs3_bit(DECT_POWER_ON);
-		}
-	}
-}
-
-static struct sa1100_port_fns simpad_port_fns __initdata = {
-	.pm	   = simpad_uart_pm,
-};
-
-
-static struct mtd_partition simpad_partitions[] = {
-	{
-		.name       = "SIMpad boot firmware",
-		.size       = 0x00080000,
-		.offset     = 0,
-		.mask_flags = MTD_WRITEABLE,
-	}, {
-		.name       = "SIMpad kernel",
-		.size       = 0x0010000,
-		.offset     = MTDPART_OFS_APPEND,
-	}, {
-		.name       = "SIMpad root jffs2",
-		.size       = MTDPART_SIZ_FULL,
-		.offset     = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct flash_platform_data simpad_flash_data = {
-	.map_name    = "cfi_probe",
-	.parts       = simpad_partitions,
-	.nr_parts    = ARRAY_SIZE(simpad_partitions),
-};
-
-
-static struct resource simpad_flash_resources [] = {
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_16M),
-	DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_16M),
-};
-
-static struct ucb1x00_plat_data simpad_ucb1x00_data = {
-	.gpio_base	= SIMPAD_UCB1X00_GPIO_BASE,
-};
-
-static struct mcp_plat_data simpad_mcp_data = {
-	.mccr0		= MCCR0_ADM,
-	.sclk_rate	= 11981000,
-	.codec_pdata	= &simpad_ucb1x00_data,
-};
-
-
-
-static void __init simpad_map_io(void)
-{
-	sa1100_map_io();
-
-	iotable_init(simpad_io_desc, ARRAY_SIZE(simpad_io_desc));
-
-	/* Initialize CS3 */
-	cs3_shadow = (EN1 | EN0 | LED2_ON | DISPLAY_ON |
-		RS232_ON | ENABLE_5V | RESET_SIMCARD | DECT_POWER_ON);
-	__simpad_write_cs3(); /* Spinlocks not yet initialized */
-
-        sa1100_register_uart_fns(&simpad_port_fns);
-	sa1100_register_uart(0, 3);  /* serial interface */
-	sa1100_register_uart(1, 1);  /* DECT             */
-
-	// Reassign UART 1 pins
-	GAFR |= GPIO_UART_TXD | GPIO_UART_RXD;
-	GPDR |= GPIO_UART_TXD | GPIO_LDD13 | GPIO_LDD15;
-	GPDR &= ~GPIO_UART_RXD;
-	PPAR |= PPAR_UPR;
-
-	/*
-	 * Set up registers for sleep mode.
-	 */
-
-
-	PWER = PWER_GPIO0| PWER_RTC;
-	PGSR = 0x818;
-	PCFR = 0;
-	PSDR = 0;
-
-}
-
-static void simpad_power_off(void)
-{
-	local_irq_disable();
-	cs3_shadow = SD_MEDIAQ;
-	__simpad_write_cs3(); /* Bypass spinlock here */
-
-	/* disable internal oscillator, float CS lines */
-	PCFR = (PCFR_OPDE | PCFR_FP | PCFR_FS);
-	/* enable wake-up on GPIO0 */
-	PWER = GFER = GRER = PWER_GPIO0;
-	/*
-	 * set scratchpad to zero, just in case it is used as a
-	 * restart address by the bootloader.
-	 */
-	PSPR = 0;
-	PGSR = 0;
-	/* enter sleep mode */
-	PMCR = PMCR_SF;
-	while(1);
-
-	local_irq_enable(); /* we won't ever call it */
-
-
-}
-
-/*
- * gpio_keys
-*/
-
-static struct gpio_keys_button simpad_button_table[] = {
-	{ KEY_POWER, IRQ_GPIO_POWER_BUTTON, 1, "power button" },
-};
-
-static struct gpio_keys_platform_data simpad_keys_data = {
-	.buttons = simpad_button_table,
-	.nbuttons = ARRAY_SIZE(simpad_button_table),
-};
-
-static struct platform_device simpad_keys = {
-	.name = "gpio-keys",
-	.dev = {
-		.platform_data = &simpad_keys_data,
-	},
-};
-
-static struct gpio_keys_button simpad_polled_button_table[] = {
-	{ KEY_PROG1, SIMPAD_UCB1X00_GPIO_PROG1, 1, "prog1 button" },
-	{ KEY_PROG2, SIMPAD_UCB1X00_GPIO_PROG2, 1, "prog2 button" },
-	{ KEY_UP,    SIMPAD_UCB1X00_GPIO_UP,    1, "up button" },
-	{ KEY_DOWN,  SIMPAD_UCB1X00_GPIO_DOWN,  1, "down button" },
-	{ KEY_LEFT,  SIMPAD_UCB1X00_GPIO_LEFT,  1, "left button" },
-	{ KEY_RIGHT, SIMPAD_UCB1X00_GPIO_RIGHT, 1, "right button" },
-};
-
-static struct gpio_keys_platform_data simpad_polled_keys_data = {
-	.buttons = simpad_polled_button_table,
-	.nbuttons = ARRAY_SIZE(simpad_polled_button_table),
-	.poll_interval = 50,
-};
-
-static struct platform_device simpad_polled_keys = {
-	.name = "gpio-keys-polled",
-	.dev = {
-		.platform_data = &simpad_polled_keys_data,
-	},
-};
-
-/*
- * GPIO LEDs
- */
-
-static struct gpio_led simpad_leds[] = {
-	{
-		.name = "simpad:power",
-		.gpio = SIMPAD_CS3_LED2_ON,
-		.active_low = 0,
-		.default_trigger = "default-on",
-	},
-};
-
-static struct gpio_led_platform_data simpad_led_data = {
-	.num_leds = ARRAY_SIZE(simpad_leds),
-	.leds = simpad_leds,
-};
-
-static struct platform_device simpad_gpio_leds = {
-	.name = "leds-gpio",
-	.id = 0,
-	.dev = {
-		.platform_data = &simpad_led_data,
-	},
-};
-
-/*
- * i2c
- */
-static struct gpiod_lookup_table simpad_i2c_gpiod_table = {
-	.dev_id = "i2c-gpio.0",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio", 21, NULL, 0,
-				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP_IDX("gpio", 25, NULL, 1,
-				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct i2c_gpio_platform_data simpad_i2c_data = {
-	.udelay = 10,
-	.timeout = HZ,
-};
-
-static struct platform_device simpad_i2c = {
-	.name = "i2c-gpio",
-	.id = 0,
-	.dev = {
-		.platform_data = &simpad_i2c_data,
-	},
-};
-
-/*
- * MediaQ Video Device
- */
-static struct platform_device simpad_mq200fb = {
-	.name = "simpad-mq200",
-	.id   = 0,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&simpad_keys,
-	&simpad_polled_keys,
-	&simpad_mq200fb,
-	&simpad_gpio_leds,
-	&simpad_i2c,
-};
-
-/* Compact Flash */
-static struct gpiod_lookup_table simpad_cf_gpio_table = {
-	.dev_id = "sa11x0-pcmcia",
-	.table = {
-		GPIO_LOOKUP("gpio", GPIO_CF_IRQ, "cf-ready", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio", GPIO_CF_CD, "cf-detect", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-
-static int __init simpad_init(void)
-{
-	int ret;
-
-	spin_lock_init(&cs3_lock);
-
-	cs3_gpio.label = "simpad_cs3";
-	cs3_gpio.base = SIMPAD_CS3_GPIO_BASE;
-	cs3_gpio.ngpio = 24;
-	cs3_gpio.set = cs3_gpio_set;
-	cs3_gpio.get = cs3_gpio_get;
-	cs3_gpio.direction_input = cs3_gpio_direction_input;
-	cs3_gpio.direction_output = cs3_gpio_direction_output;
-	ret = gpiochip_add_data(&cs3_gpio, NULL);
-	if (ret)
-		printk(KERN_WARNING "simpad: Unable to register cs3 GPIO device");
-
-	pm_power_off = simpad_power_off;
-
-	sa11x0_register_pcmcia(-1, &simpad_cf_gpio_table);
-	sa11x0_ppc_configure_mcp();
-	sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
-			      ARRAY_SIZE(simpad_flash_resources));
-	sa11x0_register_mcp(&simpad_mcp_data);
-
-	gpiod_add_lookup_table(&simpad_i2c_gpiod_table);
-	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	if(ret)
-		printk(KERN_WARNING "simpad: Unable to register mq200 framebuffer device");
-
-	return 0;
-}
-
-arch_initcall(simpad_init);
-
-
-MACHINE_START(SIMPAD, "Simpad")
-	/* Maintainer: Holger Freyther */
-	.atag_offset	= 0x100,
-	.map_io		= simpad_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_late	= sa11x0_init_late,
-	.init_time	= sa1100_timer_init,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 50909c4b95b2..8d64cc7edccd 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -3,8 +3,5 @@ menuconfig ARCH_RENESAS
 	bool "Renesas ARM SoCs"
 	depends on ARCH_MULTI_V7
 	select ARM_GIC
-	select GPIOLIB
 	select NO_IOPORT_MAP
-	select PINCTRL
-	select SOC_BUS
 	select ZONE_DMA if ARM_LPAE
diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S
index d0234296ae62..e892ee794d64 100644
--- a/arch/arm/mach-shmobile/headsmp-scu.S
+++ b/arch/arm/mach-shmobile/headsmp-scu.S
@@ -7,7 +7,7 @@
 
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 
 /*
  * Boot code for secondary CPUs.
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index 9466ae61f56a..2bc7e73a8582 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -11,7 +11,7 @@
 #include <linux/linkage.h>
 #include <linux/threads.h>
 #include <asm/assembler.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 
 #define SCTLR_MMU	0x01
 #define BOOTROM_ADDRESS	0xE6340000
@@ -136,6 +136,7 @@ ENDPROC(shmobile_smp_sleep)
 	.long	shmobile_smp_arg - 1b
 
 	.bss
+	.align	2
 	.globl	shmobile_smp_mpidr
 shmobile_smp_mpidr:
 	.space	NR_CPUS * 4
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index e771ce70e132..ec6f421c0f4d 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -10,6 +10,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/smp.h>
 #include <linux/suspend.h>
@@ -210,7 +211,6 @@ static void apmu_parse_dt(void (*fn)(struct resource *res, int cpu, int bit))
 	struct device_node *np_apmu, *np_cpu;
 	struct resource res;
 	int bit, index;
-	u32 id;
 
 	for_each_matching_node(np_apmu, apmu_ids) {
 		/* only enable the cluster that includes the boot CPU */
@@ -218,33 +218,29 @@ static void apmu_parse_dt(void (*fn)(struct resource *res, int cpu, int bit))
 
 		for (bit = 0; bit < CONFIG_NR_CPUS; bit++) {
 			np_cpu = of_parse_phandle(np_apmu, "cpus", bit);
-			if (np_cpu) {
-				if (!of_property_read_u32(np_cpu, "reg", &id)) {
-					if (id == cpu_logical_map(0)) {
-						is_allowed = true;
-						of_node_put(np_cpu);
-						break;
-					}
-
-				}
+			if (!np_cpu)
+				break;
+			if (of_cpu_node_to_id(np_cpu) == 0) {
+				is_allowed = true;
 				of_node_put(np_cpu);
+				break;
 			}
+			of_node_put(np_cpu);
 		}
 		if (!is_allowed)
 			continue;
 
 		for (bit = 0; bit < CONFIG_NR_CPUS; bit++) {
 			np_cpu = of_parse_phandle(np_apmu, "cpus", bit);
-			if (np_cpu) {
-				if (!of_property_read_u32(np_cpu, "reg", &id)) {
-					index = get_logical_index(id);
-					if ((index >= 0) &&
-					    !of_address_to_resource(np_apmu,
-								    0, &res))
-						fn(&res, index, bit);
-				}
-				of_node_put(np_cpu);
-			}
+			if (!np_cpu)
+				break;
+
+			index = of_cpu_node_to_id(np_cpu);
+			if ((index >= 0) &&
+			    !of_address_to_resource(np_apmu, 0, &res))
+				fn(&res, index, bit);
+
+			of_node_put(np_cpu);
 		}
 	}
 }
diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
index 672081405a7e..46654d196f8d 100644
--- a/arch/arm/mach-shmobile/pm-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -46,15 +46,16 @@ void __init rcar_gen2_pm_init(void)
 {
 	void __iomem *p;
 	u32 bar;
-	static int once;
 	struct device_node *np;
 	bool has_a7 = false;
 	bool has_a15 = false;
 	struct resource res;
 	int error;
 
-	if (once++)
+	if (!request_mem_region(0, SZ_256K, "Boot Area")) {
+		pr_err("Failed to request boot area\n");
 		return;
+	}
 
 	for_each_of_cpu_node(np) {
 		if (of_device_is_compatible(np, "arm,cortex-a15"))
@@ -80,7 +81,7 @@ void __init rcar_gen2_pm_init(void)
 
 map:
 	/* RAM for jump stub, because BAR requires 256KB aligned address */
-	if (res.start & (256 * 1024 - 1) ||
+	if (res.start & (SZ_256K - 1) ||
 	    resource_size(&res) < shmobile_boot_size) {
 		pr_err("Invalid smp-sram region\n");
 		return;
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 3edbf0719fb3..3cd34a42e39b 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -8,20 +8,15 @@
  */
 
 #include <linux/clocksource.h>
-#include <linux/device.h>
-#include <linux/dma-map-ops.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/memblock.h>
 #include <linux/of.h>
 #include <linux/of_clk.h>
-#include <linux/of_fdt.h>
-#include <linux/of_platform.h>
 #include <linux/psci.h>
 #include <asm/mach/arch.h>
 #include <asm/secure_cntvoff.h>
 #include "common.h"
-#include "rcar-gen2.h"
 
 static const struct of_device_id cpg_matches[] __initconst = {
 	{ .compatible = "renesas,r8a7742-cpg-mssr", .data = "extal" },
@@ -123,76 +118,6 @@ skip_update:
 	timer_probe();
 }
 
-struct memory_reserve_config {
-	u64 reserved;
-	u64 base, size;
-};
-
-static int __init rcar_gen2_scan_mem(unsigned long node, const char *uname,
-				     int depth, void *data)
-{
-	const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
-	const __be32 *reg, *endp;
-	int l;
-	struct memory_reserve_config *mrc = data;
-	u64 lpae_start = 1ULL << 32;
-
-	/* We are scanning "memory" nodes only */
-	if (type == NULL || strcmp(type, "memory"))
-		return 0;
-
-	reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l);
-	if (reg == NULL)
-		reg = of_get_flat_dt_prop(node, "reg", &l);
-	if (reg == NULL)
-		return 0;
-
-	endp = reg + (l / sizeof(__be32));
-	while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
-		u64 base, size;
-
-		base = dt_mem_next_cell(dt_root_addr_cells, &reg);
-		size = dt_mem_next_cell(dt_root_size_cells, &reg);
-
-		if (base >= lpae_start)
-			continue;
-
-		if ((base + size) >= lpae_start)
-			size = lpae_start - base;
-
-		if (size < mrc->reserved)
-			continue;
-
-		if (base < mrc->base)
-			continue;
-
-		/* keep the area at top near the 32-bit legacy limit */
-		mrc->base = base + size - mrc->reserved;
-		mrc->size = mrc->reserved;
-	}
-
-	return 0;
-}
-
-static void __init rcar_gen2_reserve(void)
-{
-	struct memory_reserve_config mrc;
-
-	/* reserve 256 MiB at the top of the physical legacy 32-bit space */
-	memset(&mrc, 0, sizeof(mrc));
-	mrc.reserved = SZ_256M;
-
-	of_scan_flat_dt(rcar_gen2_scan_mem, &mrc);
-#ifdef CONFIG_DMA_CMA
-	if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size)) {
-		static struct cma *rcar_gen2_dma_contiguous;
-
-		dma_contiguous_reserve_area(mrc.size, mrc.base, 0,
-					    &rcar_gen2_dma_contiguous, true);
-	}
-#endif
-}
-
 static const char * const rcar_gen2_boards_compat_dt[] __initconst = {
 	"renesas,r8a7790",
 	"renesas,r8a7791",
@@ -205,7 +130,6 @@ static const char * const rcar_gen2_boards_compat_dt[] __initconst = {
 DT_MACHINE_START(RCAR_GEN2_DT, "Generic R-Car Gen2 (Flattened Device Tree)")
 	.init_late	= shmobile_init_late,
 	.init_time	= rcar_gen2_timer_init,
-	.reserve	= rcar_gen2_reserve,
 	.dt_compat	= rcar_gen2_boards_compat_dt,
 MACHINE_END
 
@@ -221,6 +145,5 @@ static const char * const rz_g1_boards_compat_dt[] __initconst = {
 DT_MACHINE_START(RZ_G1_DT, "Generic RZ/G1 (Flattened Device Tree)")
 	.init_late	= shmobile_init_late,
 	.init_time	= rcar_gen2_timer_init,
-	.reserve	= rcar_gen2_reserve,
 	.dt_compat	= rz_g1_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 1bc609986c16..474c325323a3 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -38,7 +38,14 @@ static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 {
-	void __iomem *base = ioremap(HPBREG_BASE, 0x1000);
+	void __iomem *base;
+
+	if (!request_mem_region(0, SZ_4K, "Boot Area")) {
+		pr_err("Failed to request boot area\n");
+		return;
+	}
+
+	base = ioremap(HPBREG_BASE, 0x1000);
 
 	/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
 	writel(__pa(shmobile_boot_vector), base + AVECR);
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 453d48865029..9196b37ea292 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -44,10 +44,16 @@ static int sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
 {
-	void __iomem *ap = ioremap(AP_BASE, PAGE_SIZE);
-	void __iomem *sysc = ioremap(SYSC_BASE, PAGE_SIZE);
+	void __iomem *ap, *sysc;
+
+	if (!request_mem_region(0, SZ_4K, "Boot Area")) {
+		pr_err("Failed to request boot area\n");
+		return;
+	}
 
 	/* Map the reset vector (in headsmp.S) */
+	ap = ioremap(AP_BASE, PAGE_SIZE);
+	sysc = ioremap(SYSC_BASE, PAGE_SIZE);
 	writel(0, ap + APARMBAREA);      /* 4k */
 	writel(__pa(shmobile_boot_vector), sysc + SBAR);
 	iounmap(sysc);
diff --git a/arch/arm/mach-socfpga/headsmp.S b/arch/arm/mach-socfpga/headsmp.S
index 54f1844eac03..f7e91a772428 100644
--- a/arch/arm/mach-socfpga/headsmp.S
+++ b/arch/arm/mach-socfpga/headsmp.S
@@ -6,7 +6,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/assembler.h>
 
 	.arch	armv7-a
diff --git a/arch/arm/mach-socfpga/l2_cache.c b/arch/arm/mach-socfpga/l2_cache.c
index 99fb95361590..86e011eeb444 100644
--- a/arch/arm/mach-socfpga/l2_cache.c
+++ b/arch/arm/mach-socfpga/l2_cache.c
@@ -3,7 +3,7 @@
  * Copyright Altera Corporation (C) 2016. All rights reserved.
  */
 #include <linux/io.h>
-#include <linux/of_platform.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
 
 #include "core.h"
diff --git a/arch/arm/mach-socfpga/ocram.c b/arch/arm/mach-socfpga/ocram.c
index b4d397e834a0..9f1a249debf6 100644
--- a/arch/arm/mach-socfpga/ocram.c
+++ b/arch/arm/mach-socfpga/ocram.c
@@ -4,10 +4,8 @@
  */
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/genalloc.h>
-#include <linux/module.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_platform.h>
 
 #include "core.h"
 
diff --git a/arch/arm/mach-socfpga/pm.c b/arch/arm/mach-socfpga/pm.c
index 365c0428b21b..ab1c08f971f0 100644
--- a/arch/arm/mach-socfpga/pm.c
+++ b/arch/arm/mach-socfpga/pm.c
@@ -13,7 +13,9 @@
 #include <linux/genalloc.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/platform_device.h>
 #include <linux/suspend.h>
 #include <asm/suspend.h>
 #include <asm/fncpy.h>
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index 9e4cb2ffd580..4332af2d8b86 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -3,13 +3,11 @@
  *  Copyright (C) 2012-2015 Altera Corporation
  */
 #include <linux/irqchip.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
 #include <linux/reboot.h>
 #include <linux/reset/socfpga.h>
 
-#include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/cacheflush.h>
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index 1add7ee49b63..7108ad628f8d 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -81,12 +81,6 @@ config ARCH_SPEAR6XX
 	help
 	  Supports for ARM's SPEAR6XX family
 
-config MACH_SPEAR600
-	def_bool y
-	depends on ARCH_SPEAR6XX
-	help
-	  Supports ST SPEAr600 boards configured via the device-tree
-
 config ARCH_SPEAR_AUTO
 	bool
 	depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h
index 43b7996ab754..9e36920d4cfd 100644
--- a/arch/arm/mach-spear/generic.h
+++ b/arch/arm/mach-spear/generic.h
@@ -25,11 +25,8 @@ extern struct pl022_ssp_controller pl022_plat_data;
 extern struct pl08x_platform_data pl080_plat_data;
 
 void __init spear_setup_of_timer(void);
-void __init spear3xx_clk_init(void __iomem *misc_base,
-			      void __iomem *soc_config_base);
 void __init spear3xx_map_io(void);
 void __init spear3xx_dt_init_irq(void);
-void __init spear6xx_clk_init(void __iomem *misc_base);
 void __init spear13xx_map_io(void);
 void __init spear13xx_l2x0_init(void);
 
diff --git a/arch/arm/mach-spear/pl080.c b/arch/arm/mach-spear/pl080.c
index d6b8627d2544..47243a8153d0 100644
--- a/arch/arm/mach-spear/pl080.c
+++ b/arch/arm/mach-spear/pl080.c
@@ -16,6 +16,7 @@
 #include <linux/spinlock_types.h>
 #include "spear.h"
 #include "misc_regs.h"
+#include "pl080.h"
 
 static spinlock_t lock = __SPIN_LOCK_UNLOCKED(x);
 
diff --git a/arch/arm/mach-spear/spear.h b/arch/arm/mach-spear/spear.h
index 432efd407c76..f23eaf1e522f 100644
--- a/arch/arm/mach-spear/spear.h
+++ b/arch/arm/mach-spear/spear.h
@@ -10,7 +10,7 @@
 #ifndef __MACH_SPEAR_H
 #define __MACH_SPEAR_H
 
-#include <asm/memory.h>
+#include <asm/page.h>
 
 #if defined(CONFIG_ARCH_SPEAR3XX) || defined (CONFIG_ARCH_SPEAR6XX)
 
diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c
index a391f154eff9..70986ef6c877 100644
--- a/arch/arm/mach-spear/spear1340.c
+++ b/arch/arm/mach-spear/spear1340.c
@@ -10,7 +10,7 @@
 
 #define pr_fmt(fmt) "SPEAr1340: " fmt
 
-#include <linux/of_platform.h>
+#include <linux/platform_device.h>
 #include <asm/mach/arch.h>
 #include "generic.h"
 
diff --git a/arch/arm/mach-spear/spear3xx.c b/arch/arm/mach-spear/spear3xx.c
index 2ba406e92c41..7ef9670d3029 100644
--- a/arch/arm/mach-spear/spear3xx.c
+++ b/arch/arm/mach-spear/spear3xx.c
@@ -13,6 +13,7 @@
 #include <linux/amba/pl022.h>
 #include <linux/amba/pl080.h>
 #include <linux/clk.h>
+#include <linux/clk/spear.h>
 #include <linux/io.h>
 #include <asm/mach/map.h>
 #include "pl080.h"
diff --git a/arch/arm/mach-spear/spear6xx.c b/arch/arm/mach-spear/spear6xx.c
index 58183493e06d..f0a1e704cceb 100644
--- a/arch/arm/mach-spear/spear6xx.c
+++ b/arch/arm/mach-spear/spear6xx.c
@@ -12,6 +12,7 @@
 
 #include <linux/amba/pl08x.h>
 #include <linux/clk.h>
+#include <linux/clk/spear.h>
 #include <linux/err.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -339,7 +340,7 @@ static struct pl08x_platform_data spear6xx_pl080_plat_data = {
  * 0xD0000000		0xFD000000
  * 0xFC000000		0xFC000000
  */
-struct map_desc spear6xx_io_desc[] __initdata = {
+static struct map_desc spear6xx_io_desc[] __initdata = {
 	{
 		.virtual	= (unsigned long)VA_SPEAR6XX_ML_CPU_BASE,
 		.pfn		= __phys_to_pfn(SPEAR_ICM3_ML1_2_BASE),
@@ -359,12 +360,12 @@ struct map_desc spear6xx_io_desc[] __initdata = {
 };
 
 /* This will create static memory mapping for selected devices */
-void __init spear6xx_map_io(void)
+static void __init spear6xx_map_io(void)
 {
 	iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
 }
 
-void __init spear6xx_timer_init(void)
+static void __init spear6xx_timer_init(void)
 {
 	char pclk_name[] = "pll3_clk";
 	struct clk *gpt_clk, *pclk;
@@ -394,7 +395,7 @@ void __init spear6xx_timer_init(void)
 }
 
 /* Add auxdata to pass platform data */
-struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
+static struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL,
 			&spear6xx_pl080_plat_data),
 	{}
diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c
index e979e2197f8e..5371c824786d 100644
--- a/arch/arm/mach-spear/time.c
+++ b/arch/arm/mach-spear/time.c
@@ -90,7 +90,7 @@ static void __init spear_clocksource_init(void)
 		200, 16, clocksource_mmio_readw_up);
 }
 
-static inline void timer_shutdown(struct clock_event_device *evt)
+static inline void spear_timer_shutdown(struct clock_event_device *evt)
 {
 	u16 val = readw(gpt_base + CR(CLKEVT));
 
@@ -101,7 +101,7 @@ static inline void timer_shutdown(struct clock_event_device *evt)
 
 static int spear_shutdown(struct clock_event_device *evt)
 {
-	timer_shutdown(evt);
+	spear_timer_shutdown(evt);
 
 	return 0;
 }
@@ -111,7 +111,7 @@ static int spear_set_oneshot(struct clock_event_device *evt)
 	u16 val;
 
 	/* stop the timer */
-	timer_shutdown(evt);
+	spear_timer_shutdown(evt);
 
 	val = readw(gpt_base + CR(CLKEVT));
 	val |= CTRL_ONE_SHOT;
@@ -126,7 +126,7 @@ static int spear_set_periodic(struct clock_event_device *evt)
 	u16 val;
 
 	/* stop the timer */
-	timer_shutdown(evt);
+	spear_timer_shutdown(evt);
 
 	period = clk_get_rate(gpt_clk) / HZ;
 	period >>= CTRL_PRESCALER16;
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index b2d45cf10a3c..e58699e13e1a 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -19,31 +19,13 @@ menuconfig ARCH_STI
 	select PL310_ERRATA_769419 if CACHE_L2X0
 	select RESET_CONTROLLER
 	help
-	  Include support for STMicroelectronics' STiH415/416, STiH407/10 and
+	  Include support for STMicroelectronics' STiH407/10 and
 	  STiH418 family SoCs using the Device Tree for discovery.  More
-	  information can be found in Documentation/arm/sti/ and
+	  information can be found in Documentation/arch/arm/sti/ and
 	  Documentation/devicetree.
 
 if ARCH_STI
 
-config SOC_STIH415
-	bool "STiH415 STMicroelectronics Consumer Electronics family"
-	default y
-	help
-	  This enables support for STMicroelectronics Digital Consumer
-	  Electronics family StiH415 parts, primarily targeted at set-top-box
-	  and other digital audio/video applications using Flattned Device
-	  Trees.
-
-config SOC_STIH416
-	bool "STiH416 STMicroelectronics Consumer Electronics family"
-	default y
-	help
-	  This enables support for STMicroelectronics Digital Consumer
-	  Electronics family StiH416 parts, primarily targeted at set-top-box
-	  and other digital audio/video applications using Flattened Device
-	  Trees.
-
 config SOC_STIH407
 	bool "STiH407 STMicroelectronics Consumer Electronics family"
 	default y
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index ffecbf29646f..1aaf61184685 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -4,16 +4,12 @@
  * Author(s): Srinivas Kandagatla <srinivas.kandagatla@st.com>
  */
 
-#include <linux/irq.h>
-#include <linux/of_platform.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 
 #include "smp.h"
 
 static const char *const stih41x_dt_match[] __initconst = {
-	"st,stih415",
-	"st,stih416",
 	"st,stih407",
 	"st,stih410",
 	"st,stih418",
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
index 98145031586f..630b992f32b1 100644
--- a/arch/arm/mach-stm32/Kconfig
+++ b/arch/arm/mach-stm32/Kconfig
@@ -11,7 +11,8 @@ menuconfig ARCH_STM32
 	select CLKSRC_STM32
 	select PINCTRL
 	select RESET_CONTROLLER
-	select STM32_EXTI
+	select STM32_EXTI if ARM_SINGLE_ARMV7M
+	select STM32_FIREWALL
 	help
 	  Support for STMicroelectronics STM32 processors.
 
diff --git a/arch/arm/mach-stm32/Makefile.boot b/arch/arm/mach-stm32/Makefile.boot
deleted file mode 100644
index 5dde7328a7a9..000000000000
--- a/arch/arm/mach-stm32/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Empty file waiting for deletion once Makefile.boot isn't needed any more.
-# Patch waits for application at
-# https://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c
index 2ccaa11aaa56..e6233c8725ae 100644
--- a/arch/arm/mach-stm32/board-dt.c
+++ b/arch/arm/mach-stm32/board-dt.c
@@ -17,10 +17,12 @@ static const char *const stm32_compat[] __initconst = {
 	"st,stm32f746",
 	"st,stm32f769",
 	"st,stm32h743",
+	"st,stm32h747",
 	"st,stm32h750",
 	"st,stm32mp131",
 	"st,stm32mp133",
 	"st,stm32mp135",
+	"st,stm32mp151",
 	"st,stm32mp157",
 	NULL
 };
diff --git a/arch/arm/mach-sunplus/Kconfig b/arch/arm/mach-sunplus/Kconfig
deleted file mode 100644
index 926cde5e3cd9..000000000000
--- a/arch/arm/mach-sunplus/Kconfig
+++ /dev/null
@@ -1,27 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-
-menuconfig ARCH_SUNPLUS
-	bool "Sunplus SoCs"
-	depends on ARCH_MULTI_V7
-	help
-	  Support for Sunplus SoC family: SP7021 and succeeding SoC-based systems,
-	  such as the Banana Pi BPI-F2S development board (and derivatives).
-	  (<http://www.sinovoip.com.cn/ecp_view.asp?id=586>)
-	  (<https://tibbo.com/store/plus1.html>)
-
-config SOC_SP7021
-	bool "Sunplus SP7021 SoC support"
-	depends on ARCH_SUNPLUS
-	default ARCH_SUNPLUS
-	select HAVE_ARM_ARCH_TIMER
-	select ARM_GIC
-	select ARM_PSCI
-	select PINCTRL
-	select PINCTRL_SPPCTL
-	select SERIAL_SUNPLUS
-	select SERIAL_SUNPLUS_CONSOLE
-	help
-	  Support for Sunplus SP7021 SoC. It is based on ARM 4-core
-	  Cortex-A7 with various peripherals (e.g.: I2C, SPI, SDIO,
-	  Ethernet, etc.), FPGA interface,  chip-to-chip bus.
-	  It is designed for industrial control.
diff --git a/arch/arm/mach-sunplus/Makefile b/arch/arm/mach-sunplus/Makefile
deleted file mode 100644
index d211de6af2db..000000000000
--- a/arch/arm/mach-sunplus/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-$(CONFIG_SOC_SP7021)	+= sp7021.o
diff --git a/arch/arm/mach-sunplus/sp7021.c b/arch/arm/mach-sunplus/sp7021.c
deleted file mode 100644
index 774d0a5bd4eb..000000000000
--- a/arch/arm/mach-sunplus/sp7021.c
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-/*
- * Copyright (C) Sunplus Technology Co., Ltd.
- *       All rights reserved.
- */
-#include <linux/kernel.h>
-#include <asm/mach/arch.h>
-
-static const char *sp7021_compat[] __initconst = {
-	"sunplus,sp7021",
-	NULL
-};
-
-DT_MACHINE_START(SP7021_DT, "SP7021")
-	.dt_compat	= sp7021_compat,
-MACHINE_END
diff --git a/arch/arm/mach-sunxi/mc_smp.c b/arch/arm/mach-sunxi/mc_smp.c
index 26cbce135338..277f6aa8e6c2 100644
--- a/arch/arm/mach-sunxi/mc_smp.c
+++ b/arch/arm/mach-sunxi/mc_smp.c
@@ -19,7 +19,6 @@
 #include <linux/irqchip/arm-gic.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_device.h>
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
@@ -804,16 +803,16 @@ static int __init sunxi_mc_smp_init(void)
 	for (i = 0; i < ARRAY_SIZE(sunxi_mc_smp_data); i++) {
 		ret = of_property_match_string(node, "enable-method",
 					       sunxi_mc_smp_data[i].enable_method);
-		if (!ret)
+		if (ret >= 0)
 			break;
 	}
 
-	is_a83t = sunxi_mc_smp_data[i].is_a83t;
-
 	of_node_put(node);
-	if (ret)
+	if (ret < 0)
 		return -ENODEV;
 
+	is_a83t = sunxi_mc_smp_data[i].is_a83t;
+
 	if (!sunxi_mc_smp_cpu_table_init())
 		return -EINVAL;
 
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 07572b5373b8..a2bb55bc0081 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -1,6 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-asflags-y				+= -march=armv7-a
-
 obj-y                                   += io.o
 obj-y                                   += irq.o
 obj-y					+= pm.o
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 18d37f90cdfe..3ec810b6f1a7 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -8,35 +8,49 @@
  * Copyright (C) 2010 Google, Inc.
  */
 
-#include <linux/property.h>
+#include <linux/err.h>
 #include <linux/gpio/machine.h>
+#include <linux/gpio/property.h>
 #include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/property.h>
 
 #include "board.h"
 
-static struct property_entry wifi_rfkill_prop[] __initdata = {
-	PROPERTY_ENTRY_STRING("name", "wifi_rfkill"),
-	PROPERTY_ENTRY_STRING("type", "wlan"),
-	{ },
+static const struct software_node tegra_gpiochip_node = {
+	.name	= "tegra-gpio",
 };
 
-static struct platform_device wifi_rfkill_device = {
-	.name	= "rfkill_gpio",
-	.id	= -1,
+static const struct property_entry wifi_rfkill_prop[] __initconst = {
+	PROPERTY_ENTRY_STRING("name", "wifi_rfkill"),
+	PROPERTY_ENTRY_STRING("type", "wlan"),
+	PROPERTY_ENTRY_GPIO("reset-gpios",
+			    &tegra_gpiochip_node, 25, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("shutdown-gpios",
+			    &tegra_gpiochip_node, 85, GPIO_ACTIVE_HIGH),
+	{ }
 };
 
-static struct gpiod_lookup_table wifi_gpio_lookup = {
-	.dev_id = "rfkill_gpio",
-	.table = {
-		GPIO_LOOKUP("tegra-gpio", 25, "reset", 0),
-		GPIO_LOOKUP("tegra-gpio", 85, "shutdown", 0),
-		{ },
-	},
+static const struct platform_device_info wifi_rfkill_info __initconst = {
+	.name		= "rfkill_gpio",
+	.id		= PLATFORM_DEVID_NONE,
+	.properties	= wifi_rfkill_prop,
 };
 
 void __init tegra_paz00_wifikill_init(void)
 {
-	device_create_managed_software_node(&wifi_rfkill_device.dev, wifi_rfkill_prop, NULL);
-	gpiod_add_lookup_table(&wifi_gpio_lookup);
-	platform_device_register(&wifi_rfkill_device);
+	struct platform_device *pd;
+	int err;
+
+	err = software_node_register(&tegra_gpiochip_node);
+	if (err) {
+		pr_err("failed to register %s node: %d\n",
+		       tegra_gpiochip_node.name, err);
+		return;
+	}
+
+	pd = platform_device_register_full(&wifi_rfkill_info);
+	err = PTR_ERR_OR_ZERO(pd);
+	if (err)
+		pr_err("failed to register WiFi rfkill device: %d\n", err);
 }
diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
index 06ca44b09381..0ea456264f3e 100644
--- a/arch/arm/mach-tegra/reset-handler.S
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -19,6 +19,8 @@
 
 #define PMC_SCRATCH41	0x140
 
+.arch armv7-a
+
 #ifdef CONFIG_PM_SLEEP
 /*
  *	tegra_resume
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index d5c805adf7a8..ea706fac6358 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -63,7 +63,7 @@ static void __init tegra_cpu_reset_handler_enable(void)
 	BUG_ON(is_enabled);
 	BUG_ON(tegra_cpu_reset_handler_size > TEGRA_IRAM_RESET_HANDLER_SIZE);
 
-	memcpy(iram_base, (void *)__tegra_cpu_reset_handler_start,
+	memcpy_toio(iram_base, (void *)__tegra_cpu_reset_handler_start,
 			tegra_cpu_reset_handler_size);
 
 	err = call_firmware_op(set_cpu_boot_addr, 0, reset_address);
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index a5a36cce142a..d8cd487a8f63 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -47,6 +47,8 @@
 #define PLLM_STORE_MASK			(1 << 1)
 #define PLLP_STORE_MASK			(1 << 2)
 
+.arch armv7-a
+
 .macro test_pll_state, rd, test_mask
 	ldr	\rd, tegra_pll_state
 	tst	\rd, #\test_mask
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 0cc40b6b2ba3..134ea5fe49b2 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -78,6 +78,8 @@
 #define PLLX_STORE_MASK			(1 << 4)
 #define PLLM_PMC_STORE_MASK		(1 << 5)
 
+.arch armv7-a
+
 .macro emc_device_mask, rd, base
 	ldr	\rd, [\base, #EMC_ADR_CFG]
 	tst	\rd, #0x1
diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S
index 8f88944831c5..945f2c1474f7 100644
--- a/arch/arm/mach-tegra/sleep.S
+++ b/arch/arm/mach-tegra/sleep.S
@@ -22,6 +22,8 @@
 #define CLK_RESET_CCLK_BURST	0x20
 #define CLK_RESET_CCLK_DIVIDER  0x24
 
+.arch armv7-a
+
 #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
 /*
  * tegra_disable_clean_inv_dcache
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index ab5008f35803..9ef1dfa7b926 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -19,7 +19,6 @@
 #include <linux/of_fdt.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/pda_power.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 #include <linux/slab.h>
diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
deleted file mode 100644
index e661d2626675..000000000000
--- a/arch/arm/mach-uniphier/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config ARCH_UNIPHIER
-	bool "Socionext UniPhier SoCs"
-	depends on ARCH_MULTI_V7
-	select ARCH_HAS_RESET_CONTROLLER
-	select ARM_AMBA
-	select ARM_GLOBAL_TIMER
-	select ARM_GIC
-	select HAVE_ARM_SCU
-	select HAVE_ARM_TWD if SMP
-	select PINCTRL
-	select RESET_CONTROLLER
-	help
-	  Support for UniPhier SoC family developed by Socionext Inc.
-	  (formerly, System LSI Business Division of Panasonic Corporation)
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 5e903241bded..270e5676fa02 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -6,4 +6,3 @@
 obj-y				:= pm.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o
 obj-$(CONFIG_SMP)		+= platsmp.o
-obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index e929aaa744c0..b1a70f203372 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -26,9 +26,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 
-#include "db8500-regs.h"
-#include "pm_domains.h"
-
 static int __init ux500_l2x0_unlock(void)
 {
 	int i;
@@ -116,9 +113,6 @@ static const struct of_device_id u8500_local_bus_nodes[] = {
 
 static void __init u8500_init_machine(void)
 {
-	/* Initialize ux500 power domains */
-	ux500_pm_domains_init();
-
 	of_platform_populate(NULL, u8500_local_bus_nodes,
 			     NULL, NULL);
 }
diff --git a/arch/arm/mach-ux500/db8500-regs.h b/arch/arm/mach-ux500/db8500-regs.h
deleted file mode 100644
index 0d47d7171d9b..000000000000
--- a/arch/arm/mach-ux500/db8500-regs.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) ST-Ericsson SA 2010
- */
-
-#ifndef __MACH_DB8500_REGS_H
-#define __MACH_DB8500_REGS_H
-
-/* Base address and bank offsets for ESRAM */
-#define U8500_ESRAM_BASE	0x40000000
-#define U8500_ESRAM_BANK_SIZE	0x00020000
-#define U8500_ESRAM_BANK0	U8500_ESRAM_BASE
-#define U8500_ESRAM_BANK1	(U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE)
-#define U8500_ESRAM_BANK2	(U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
-#define U8500_ESRAM_BANK3	(U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
-#define U8500_ESRAM_BANK4	(U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
-/*
- * on V1 DMA uses 4KB for logical parameters position is right after the 64KB
- * reserved for security
- */
-#define U8500_ESRAM_DMA_LCPA_OFFSET     0x10000
-
-#define U8500_DMA_LCPA_BASE    (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET)
-
-/* This address fulfills the 256k alignment requirement of the lcla base */
-#define U8500_DMA_LCLA_BASE	U8500_ESRAM_BANK4
-
-#define U8500_PER3_BASE		0x80000000
-#define U8500_STM_BASE		0x80100000
-#define U8500_STM_REG_BASE	(U8500_STM_BASE + 0xF000)
-#define U8500_PER2_BASE		0x80110000
-#define U8500_PER1_BASE		0x80120000
-#define U8500_B2R2_BASE		0x80130000
-#define U8500_HSEM_BASE		0x80140000
-#define U8500_PER4_BASE		0x80150000
-#define U8500_TPIU_BASE		0x80190000
-#define U8500_ICN_BASE		0x81000000
-
-#define U8500_BOOT_ROM_BASE	0x90000000
-/* ASIC ID is at 0xbf4 offset within this region */
-#define U8500_ASIC_ID_BASE	0x9001D000
-
-#define U8500_PER6_BASE		0xa03c0000
-#define U8500_PER7_BASE		0xa03d0000
-#define U8500_PER5_BASE		0xa03e0000
-
-#define U8500_SVA_BASE		0xa0100000
-#define U8500_SIA_BASE		0xa0200000
-
-#define U8500_SGA_BASE		0xa0300000
-#define U8500_MCDE_BASE		0xa0350000
-#define U8500_DMA_BASE		0x801C0000	/* v1 */
-
-#define U8500_SBAG_BASE		0xa0390000
-
-#define U8500_SCU_BASE		0xa0410000
-#define U8500_GIC_CPU_BASE	0xa0410100
-#define U8500_TWD_BASE		0xa0410600
-#define U8500_GIC_DIST_BASE	0xa0411000
-#define U8500_L2CC_BASE		0xa0412000
-
-#define U8500_MODEM_I2C		0xb7e02000
-
-#define U8500_GPIO0_BASE	(U8500_PER1_BASE + 0xE000)
-#define U8500_GPIO1_BASE	(U8500_PER3_BASE + 0xE000)
-#define U8500_GPIO2_BASE	(U8500_PER2_BASE + 0xE000)
-#define U8500_GPIO3_BASE	(U8500_PER5_BASE + 0x1E000)
-
-#define U8500_UART0_BASE	(U8500_PER1_BASE + 0x0000)
-#define U8500_UART1_BASE	(U8500_PER1_BASE + 0x1000)
-
-/* per6 base addresses */
-#define U8500_RNG_BASE		(U8500_PER6_BASE + 0x0000)
-#define U8500_HASH0_BASE        (U8500_PER6_BASE + 0x1000)
-#define U8500_HASH1_BASE        (U8500_PER6_BASE + 0x2000)
-#define U8500_PKA_BASE		(U8500_PER6_BASE + 0x4000)
-#define U8500_PKAM_BASE		(U8500_PER6_BASE + 0x5100)
-#define U8500_MTU0_BASE		(U8500_PER6_BASE + 0x6000) /* v1 */
-#define U8500_MTU1_BASE		(U8500_PER6_BASE + 0x7000) /* v1 */
-#define U8500_CR_BASE		(U8500_PER6_BASE + 0x8000) /* v1 */
-#define U8500_CRYP0_BASE	(U8500_PER6_BASE + 0xa000)
-#define U8500_CRYP1_BASE	(U8500_PER6_BASE + 0xb000)
-#define U8500_CLKRST6_BASE	(U8500_PER6_BASE + 0xf000)
-
-/* per5 base addresses */
-#define U8500_USBOTG_BASE	(U8500_PER5_BASE + 0x00000)
-#define U8500_CLKRST5_BASE	(U8500_PER5_BASE + 0x1f000)
-
-/* per4 base addresses */
-#define U8500_BACKUPRAM0_BASE	(U8500_PER4_BASE + 0x00000)
-#define U8500_BACKUPRAM1_BASE	(U8500_PER4_BASE + 0x01000)
-#define U8500_RTT0_BASE		(U8500_PER4_BASE + 0x02000)
-#define U8500_RTT1_BASE		(U8500_PER4_BASE + 0x03000)
-#define U8500_RTC_BASE		(U8500_PER4_BASE + 0x04000)
-#define U8500_SCR_BASE		(U8500_PER4_BASE + 0x05000)
-#define U8500_DMC_BASE		(U8500_PER4_BASE + 0x06000)
-#define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x07000)
-#define U9540_DMC1_BASE		(U8500_PER4_BASE + 0x0A000)
-#define U8500_PRCMU_TCDM_BASE	(U8500_PER4_BASE + 0x68000)
-#define U8500_PRCMU_TCPM_BASE   (U8500_PER4_BASE + 0x60000)
-#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338)
-#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450)
-
-/* per3 base addresses */
-#define U8500_FSMC_BASE		(U8500_PER3_BASE + 0x0000)
-#define U8500_SSP0_BASE		(U8500_PER3_BASE + 0x2000)
-#define U8500_SSP1_BASE		(U8500_PER3_BASE + 0x3000)
-#define U8500_I2C0_BASE		(U8500_PER3_BASE + 0x4000)
-#define U8500_SDI2_BASE		(U8500_PER3_BASE + 0x5000)
-#define U8500_SKE_BASE		(U8500_PER3_BASE + 0x6000)
-#define U8500_UART2_BASE	(U8500_PER3_BASE + 0x7000)
-#define U8500_SDI5_BASE		(U8500_PER3_BASE + 0x8000)
-#define U8500_CLKRST3_BASE	(U8500_PER3_BASE + 0xf000)
-
-/* per2 base addresses */
-#define U8500_I2C3_BASE		(U8500_PER2_BASE + 0x0000)
-#define U8500_SPI2_BASE		(U8500_PER2_BASE + 0x1000)
-#define U8500_SPI1_BASE		(U8500_PER2_BASE + 0x2000)
-#define U8500_PWL_BASE		(U8500_PER2_BASE + 0x3000)
-#define U8500_SDI4_BASE		(U8500_PER2_BASE + 0x4000)
-#define U8500_MSP2_BASE		(U8500_PER2_BASE + 0x7000)
-#define U8500_SDI1_BASE		(U8500_PER2_BASE + 0x8000)
-#define U8500_SDI3_BASE		(U8500_PER2_BASE + 0x9000)
-#define U8500_SPI0_BASE		(U8500_PER2_BASE + 0xa000)
-#define U8500_HSIR_BASE		(U8500_PER2_BASE + 0xb000)
-#define U8500_HSIT_BASE		(U8500_PER2_BASE + 0xc000)
-#define U8500_CLKRST2_BASE	(U8500_PER2_BASE + 0xf000)
-
-/* per1 base addresses */
-#define U8500_I2C1_BASE		(U8500_PER1_BASE + 0x2000)
-#define U8500_MSP0_BASE		(U8500_PER1_BASE + 0x3000)
-#define U8500_MSP1_BASE		(U8500_PER1_BASE + 0x4000)
-#define U8500_MSP3_BASE		(U8500_PER1_BASE + 0x5000)
-#define U8500_SDI0_BASE		(U8500_PER1_BASE + 0x6000)
-#define U8500_I2C2_BASE		(U8500_PER1_BASE + 0x8000)
-#define U8500_SPI3_BASE		(U8500_PER1_BASE + 0x9000)
-#define U8500_I2C4_BASE		(U8500_PER1_BASE + 0xa000)
-#define U8500_SLIM0_BASE	(U8500_PER1_BASE + 0xb000)
-#define U8500_CLKRST1_BASE	(U8500_PER1_BASE + 0xf000)
-
-#define U8500_SHRM_GOP_INTERRUPT_BASE	0xB7C00040
-
-#define U8500_GPIOBANK0_BASE	U8500_GPIO0_BASE
-#define U8500_GPIOBANK1_BASE	(U8500_GPIO0_BASE + 0x80)
-#define U8500_GPIOBANK2_BASE	U8500_GPIO1_BASE
-#define U8500_GPIOBANK3_BASE	(U8500_GPIO1_BASE + 0x80)
-#define U8500_GPIOBANK4_BASE	(U8500_GPIO1_BASE + 0x100)
-#define U8500_GPIOBANK5_BASE	(U8500_GPIO1_BASE + 0x180)
-#define U8500_GPIOBANK6_BASE	U8500_GPIO2_BASE
-#define U8500_GPIOBANK7_BASE	(U8500_GPIO2_BASE + 0x80)
-#define U8500_GPIOBANK8_BASE	U8500_GPIO3_BASE
-
-#define U8500_MCDE_SIZE		0x1000
-#define U8500_DSI_LINK_SIZE	0x1000
-#define U8500_DSI_LINK1_BASE	(U8500_MCDE_BASE + U8500_MCDE_SIZE)
-#define U8500_DSI_LINK2_BASE	(U8500_DSI_LINK1_BASE + U8500_DSI_LINK_SIZE)
-#define U8500_DSI_LINK3_BASE	(U8500_DSI_LINK2_BASE + U8500_DSI_LINK_SIZE)
-#define U8500_DSI_LINK_COUNT	0x3
-
-/* Modem and APE physical addresses */
-#define U8500_MODEM_BASE	0xe000000
-#define U8500_APE_BASE		0x6000000
-
-/* SoC identification number information */
-#define U8500_BB_UID_BASE      (U8500_BACKUPRAM1_BASE + 0xFC0)
-
-/* Offsets to specific addresses in some IP blocks for DMA */
-#define MSP_TX_RX_REG_OFFSET	0
-#define CRYP1_RX_REG_OFFSET	0x10
-#define CRYP1_TX_REG_OFFSET	0x8
-#define HASH1_TX_REG_OFFSET	0x4
-
-/*
- * Macros to get at IO space when running virtually
- * We dont map all the peripherals, let ioremap do
- * this for us. We map only very basic peripherals here.
- */
-#define U8500_IO_VIRTUAL	0xf0000000
-#define U8500_IO_PHYSICAL	0xa0000000
-/* This is where we map in the ROM to check ASIC IDs */
-#define UX500_VIRT_ROM		IOMEM(0xf0000000)
-
-/* This macro is used in assembly, so no cast */
-#define IO_ADDRESS(x)           \
-	(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
-
-/* typesafe io address */
-#define __io_address(n)		IOMEM(IO_ADDRESS(n))
-
-/* Used by some plat-nomadik code */
-#define io_p2v(n)		__io_address(n)
-
-#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
-
-#endif
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 415d8ad2a3c1..656b58bd296a 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -20,8 +20,6 @@
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 
-#include "db8500-regs.h"
-
 /* Magic triggers in backup RAM */
 #define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
 #define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
diff --git a/arch/arm/mach-ux500/pm.c b/arch/arm/mach-ux500/pm.c
index ff9c375e4277..dc962d006b08 100644
--- a/arch/arm/mach-ux500/pm.c
+++ b/arch/arm/mach-ux500/pm.c
@@ -16,8 +16,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 
-#include "db8500-regs.h"
-
 /* ARM WFI Standby signal register */
 #define PRCM_ARM_WFI_STANDBY    (prcmu_base + 0x130)
 #define PRCM_ARM_WFI_STANDBY_WFI0		0x08
@@ -124,7 +122,7 @@ bool prcmu_pending_irq(void)
 }
 
 /*
- * This function checks if the specified cpu is in in WFI. It's usage
+ * This function checks if the specified cpu is in WFI. It's usage
  * makes sense only if the gic is decoupled with the db8500_prcmu_gic_decouple
  * function. Of course passing smp_processor_id() to this function will
  * always return false...
diff --git a/arch/arm/mach-ux500/pm_domains.c b/arch/arm/mach-ux500/pm_domains.c
deleted file mode 100644
index 427b9ac4af6c..000000000000
--- a/arch/arm/mach-ux500/pm_domains.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Linaro Ltd.
- *
- * Author: Ulf Hansson <ulf.hansson@linaro.org>
- *
- * Implements PM domains using the generic PM domain for ux500.
- */
-#include <linux/printk.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/of.h>
-#include <linux/pm_domain.h>
-
-#include <dt-bindings/arm/ux500_pm_domains.h>
-#include "pm_domains.h"
-
-static int pd_power_off(struct generic_pm_domain *domain)
-{
-	/*
-	 * Handle the gating of the PM domain regulator here.
-	 *
-	 * Drivers/subsystems handling devices in the PM domain needs to perform
-	 * register context save/restore from their respective runtime PM
-	 * callbacks, to be able to enable PM domain gating/ungating.
-	 */
-	return 0;
-}
-
-static int pd_power_on(struct generic_pm_domain *domain)
-{
-	/*
-	 * Handle the ungating of the PM domain regulator here.
-	 *
-	 * Drivers/subsystems handling devices in the PM domain needs to perform
-	 * register context save/restore from their respective runtime PM
-	 * callbacks, to be able to enable PM domain gating/ungating.
-	 */
-	return 0;
-}
-
-static struct generic_pm_domain ux500_pm_domain_vape = {
-	.name = "VAPE",
-	.power_off = pd_power_off,
-	.power_on = pd_power_on,
-};
-
-static struct generic_pm_domain *ux500_pm_domains[NR_DOMAINS] = {
-	[DOMAIN_VAPE] = &ux500_pm_domain_vape,
-};
-
-static const struct of_device_id ux500_pm_domain_matches[] __initconst = {
-	{ .compatible = "stericsson,ux500-pm-domains", },
-	{ },
-};
-
-int __init ux500_pm_domains_init(void)
-{
-	struct device_node *np;
-	struct genpd_onecell_data *genpd_data;
-	int i;
-
-	np = of_find_matching_node(NULL, ux500_pm_domain_matches);
-	if (!np)
-		return -ENODEV;
-
-	genpd_data = kzalloc(sizeof(*genpd_data), GFP_KERNEL);
-	if (!genpd_data)
-		return -ENOMEM;
-
-	genpd_data->domains = ux500_pm_domains;
-	genpd_data->num_domains = ARRAY_SIZE(ux500_pm_domains);
-
-	for (i = 0; i < ARRAY_SIZE(ux500_pm_domains); ++i)
-		pm_genpd_init(ux500_pm_domains[i], NULL, false);
-
-	of_genpd_add_provider_onecell(np, genpd_data);
-	return 0;
-}
diff --git a/arch/arm/mach-ux500/pm_domains.h b/arch/arm/mach-ux500/pm_domains.h
deleted file mode 100644
index 33c55f2c6b3c..000000000000
--- a/arch/arm/mach-ux500/pm_domains.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2014 Linaro Ltd.
- *
- * Author: Ulf Hansson <ulf.hansson@linaro.org>
- */
-
-#ifndef __MACH_UX500_PM_DOMAINS_H
-#define __MACH_UX500_PM_DOMAINS_H
-
-#ifdef CONFIG_PM_GENERIC_DOMAINS
-extern int __init ux500_pm_domains_init(void);
-#else
-static inline int ux500_pm_domains_init(void) { return 0; }
-#endif
-
-#endif
diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index 2ef226194c3a..513618078440 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -201,23 +201,6 @@ config REALVIEW_EB_A9MP
 	  Enable support for the Cortex-A9MPCore tile fitted to the
 	  Realview(R) Emulation Baseboard platform.
 
-config REALVIEW_EB_ARM11MP
-	bool "Support ARM11MPCore Tile"
-	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
-	select HAVE_SMP
-	help
-	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
-	  Emulation Baseboard platform.
-
-config MACH_REALVIEW_PB11MP
-	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
-	depends on ARCH_MULTI_V6
-	select HAVE_SMP
-	help
-	  Include support for the ARM(R) RealView(R) Platform Baseboard for
-	  the ARM11MPCore.  This platform has an on-board ARM11MPCore and has
-	  support for PCI-E and Compact Flash.
-
 # ARMv6 CPU without K extensions, but does have the new exclusive ops
 config MACH_REALVIEW_PB1176
 	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
@@ -256,7 +239,6 @@ menuconfig ARCH_VEXPRESS
 	select GPIOLIB
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_PATA_PLATFORM
 	select CLK_ICST
 	select NO_IOPORT_MAP
 	select PLAT_VERSATILE
@@ -296,15 +278,6 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
 	  build a working kernel, you must also enable relevant core
 	  tile support or Flattened Device Tree based support options.
 
-config ARCH_VEXPRESS_DCSCB
-	bool "Dual Cluster System Control Block (DCSCB) support"
-	depends on MCPM
-	select ARM_CCI400_PORT_CTRL
-	help
-	  Support for the Dual Cluster System Configuration Block (DCSCB).
-	  This is needed to provide CPU and cluster power management
-	  on RTSM implementing big.LITTLE.
-
 config ARCH_VEXPRESS_SPC
 	bool "Versatile Express Serial Power Controller (SPC)"
 	select PM_OPP
diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile
index 27d712bcf1af..d819fb2fc450 100644
--- a/arch/arm/mach-versatile/Makefile
+++ b/arch/arm/mach-versatile/Makefile
@@ -16,9 +16,6 @@ obj-$(CONFIG_ARCH_REALVIEW)		+= realview.o
 
 # vexpress
 obj-$(CONFIG_ARCH_VEXPRESS)		:= v2m.o
-obj-$(CONFIG_ARCH_VEXPRESS_DCSCB)	+= dcscb.o	dcscb_setup.o
-CFLAGS_dcscb.o				+= -march=armv7-a
-CFLAGS_REMOVE_dcscb.o			= -pg
 obj-$(CONFIG_ARCH_VEXPRESS_SPC)		+= spc.o
 CFLAGS_REMOVE_spc.o			= -pg
 obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM)	+= tc2_pm.o
diff --git a/arch/arm/mach-versatile/Makefile.boot b/arch/arm/mach-versatile/Makefile.boot
deleted file mode 100644
index cec195d4fcba..000000000000
--- a/arch/arm/mach-versatile/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Empty file waiting for deletion once Makefile.boot isn't needed any more.
-# Patch waits for application at
-# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-versatile/dcscb.c b/arch/arm/mach-versatile/dcscb.c
deleted file mode 100644
index d8797350996d..000000000000
--- a/arch/arm/mach-versatile/dcscb.c
+++ /dev/null
@@ -1,173 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * dcscb.c - Dual Cluster System Configuration Block
- *
- * Created by:	Nicolas Pitre, May 2012
- * Copyright:	(C) 2012-2013  Linaro Limited
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/of_address.h>
-#include <linux/vexpress.h>
-#include <linux/arm-cci.h>
-
-#include <asm/mcpm.h>
-#include <asm/proc-fns.h>
-#include <asm/cacheflush.h>
-#include <asm/cputype.h>
-#include <asm/cp15.h>
-
-#include "vexpress.h"
-
-#define RST_HOLD0	0x0
-#define RST_HOLD1	0x4
-#define SYS_SWRESET	0x8
-#define RST_STAT0	0xc
-#define RST_STAT1	0x10
-#define EAG_CFG_R	0x20
-#define EAG_CFG_W	0x24
-#define KFC_CFG_R	0x28
-#define KFC_CFG_W	0x2c
-#define DCS_CFG_R	0x30
-
-static void __iomem *dcscb_base;
-static int dcscb_allcpus_mask[2];
-
-static int dcscb_cpu_powerup(unsigned int cpu, unsigned int cluster)
-{
-	unsigned int rst_hold, cpumask = (1 << cpu);
-
-	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
-	if (cluster >= 2 || !(cpumask & dcscb_allcpus_mask[cluster]))
-		return -EINVAL;
-
-	rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
-	rst_hold &= ~(cpumask | (cpumask << 4));
-	writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
-	return 0;
-}
-
-static int dcscb_cluster_powerup(unsigned int cluster)
-{
-	unsigned int rst_hold;
-
-	pr_debug("%s: cluster %u\n", __func__, cluster);
-	if (cluster >= 2)
-		return -EINVAL;
-
-	/* remove cluster reset and add individual CPU's reset */
-	rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
-	rst_hold &= ~(1 << 8);
-	rst_hold |= dcscb_allcpus_mask[cluster];
-	writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
-	return 0;
-}
-
-static void dcscb_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster)
-{
-	unsigned int rst_hold;
-
-	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
-	BUG_ON(cluster >= 2 || !((1 << cpu) & dcscb_allcpus_mask[cluster]));
-
-	rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
-	rst_hold |= (1 << cpu);
-	writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
-}
-
-static void dcscb_cluster_powerdown_prepare(unsigned int cluster)
-{
-	unsigned int rst_hold;
-
-	pr_debug("%s: cluster %u\n", __func__, cluster);
-	BUG_ON(cluster >= 2);
-
-	rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
-	rst_hold |= (1 << 8);
-	writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
-}
-
-static void dcscb_cpu_cache_disable(void)
-{
-	/* Disable and flush the local CPU cache. */
-	v7_exit_coherency_flush(louis);
-}
-
-static void dcscb_cluster_cache_disable(void)
-{
-	/* Flush all cache levels for this cluster. */
-	v7_exit_coherency_flush(all);
-
-	/*
-	 * A full outer cache flush could be needed at this point
-	 * on platforms with such a cache, depending on where the
-	 * outer cache sits. In some cases the notion of a "last
-	 * cluster standing" would need to be implemented if the
-	 * outer cache is shared across clusters. In any case, when
-	 * the outer cache needs flushing, there is no concurrent
-	 * access to the cache controller to worry about and no
-	 * special locking besides what is already provided by the
-	 * MCPM state machinery is needed.
-	 */
-
-	/*
-	 * Disable cluster-level coherency by masking
-	 * incoming snoops and DVM messages:
-	 */
-	cci_disable_port_by_cpu(read_cpuid_mpidr());
-}
-
-static const struct mcpm_platform_ops dcscb_power_ops = {
-	.cpu_powerup		= dcscb_cpu_powerup,
-	.cluster_powerup	= dcscb_cluster_powerup,
-	.cpu_powerdown_prepare	= dcscb_cpu_powerdown_prepare,
-	.cluster_powerdown_prepare = dcscb_cluster_powerdown_prepare,
-	.cpu_cache_disable	= dcscb_cpu_cache_disable,
-	.cluster_cache_disable	= dcscb_cluster_cache_disable,
-};
-
-extern void dcscb_power_up_setup(unsigned int affinity_level);
-
-static int __init dcscb_init(void)
-{
-	struct device_node *node;
-	unsigned int cfg;
-	int ret;
-
-	if (!cci_probed())
-		return -ENODEV;
-
-	node = of_find_compatible_node(NULL, NULL, "arm,rtsm,dcscb");
-	if (!node)
-		return -ENODEV;
-	dcscb_base = of_iomap(node, 0);
-	of_node_put(node);
-	if (!dcscb_base)
-		return -EADDRNOTAVAIL;
-	cfg = readl_relaxed(dcscb_base + DCS_CFG_R);
-	dcscb_allcpus_mask[0] = (1 << (((cfg >> 16) >> (0 << 2)) & 0xf)) - 1;
-	dcscb_allcpus_mask[1] = (1 << (((cfg >> 16) >> (1 << 2)) & 0xf)) - 1;
-
-	ret = mcpm_platform_register(&dcscb_power_ops);
-	if (!ret)
-		ret = mcpm_sync_init(dcscb_power_up_setup);
-	if (ret) {
-		iounmap(dcscb_base);
-		return ret;
-	}
-
-	pr_info("VExpress DCSCB support installed\n");
-
-	/*
-	 * Future entries into the kernel can now go
-	 * through the cluster entry vectors.
-	 */
-	vexpress_flags_set(__pa_symbol(mcpm_entry_point));
-
-	return 0;
-}
-
-early_initcall(dcscb_init);
diff --git a/arch/arm/mach-versatile/dcscb_setup.S b/arch/arm/mach-versatile/dcscb_setup.S
deleted file mode 100644
index 92d1fd9d7f6a..000000000000
--- a/arch/arm/mach-versatile/dcscb_setup.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Created by:  Dave Martin, 2012-06-22
- * Copyright:   (C) 2012-2013  Linaro Limited
- */
-
-#include <linux/linkage.h>
-
-
-ENTRY(dcscb_power_up_setup)
-
-	cmp	r0, #0			@ check affinity level
-	beq	2f
-
-/*
- * Enable cluster-level coherency, in preparation for turning on the MMU.
- * The ACTLR SMP bit does not need to be set here, because cpu_resume()
- * already restores that.
- *
- * A15/A7 may not require explicit L2 invalidation on reset, dependent
- * on hardware integration decisions.
- * For now, this code assumes that L2 is either already invalidated,
- * or invalidation is not required.
- */
-
-	b	cci_enable_port_for_self
-
-2:	@ Implementation-specific local CPU setup operations should go here,
-	@ if any.  In this case, there is nothing to do.
-
-	bx	lr
-
-ENDPROC(dcscb_power_up_setup)
diff --git a/arch/arm/mach-versatile/integrator_ap.c b/arch/arm/mach-versatile/integrator_ap.c
index e216fac917d0..4bd6712e9f52 100644
--- a/arch/arm/mach-versatile/integrator_ap.c
+++ b/arch/arm/mach-versatile/integrator_ap.c
@@ -11,6 +11,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
+#include <linux/uaccess.h>
 #include <linux/termios.h>
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
diff --git a/arch/arm/mach-versatile/platsmp-realview.c b/arch/arm/mach-versatile/platsmp-realview.c
index 5d363385c801..d38b2e174257 100644
--- a/arch/arm/mach-versatile/platsmp-realview.c
+++ b/arch/arm/mach-versatile/platsmp-realview.c
@@ -18,6 +18,11 @@
 #define REALVIEW_SYS_FLAGSSET_OFFSET	0x30
 
 static const struct of_device_id realview_scu_match[] = {
+	/*
+	 * The ARM11MP SCU compatible is only provided as fallback for
+	 * old RealView EB Cortex-A9 device trees that were using this
+	 * compatible by mistake.
+	 */
 	{ .compatible = "arm,arm11mp-scu", },
 	{ .compatible = "arm,cortex-a9-scu", },
 	{ .compatible = "arm,cortex-a5-scu", },
@@ -27,7 +32,6 @@ static const struct of_device_id realview_scu_match[] = {
 static const struct of_device_id realview_syscon_match[] = {
         { .compatible = "arm,core-module-integrator", },
         { .compatible = "arm,realview-eb-syscon", },
-        { .compatible = "arm,realview-pb11mp-syscon", },
         { .compatible = "arm,realview-pbx-syscon", },
         { },
 };
@@ -66,6 +70,7 @@ static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
 		return;
 	}
 	map = syscon_node_to_regmap(np);
+	of_node_put(np);
 	if (IS_ERR(map)) {
 		pr_err("PLATSMP: No syscon regmap\n");
 		return;
diff --git a/arch/arm/mach-versatile/realview.c b/arch/arm/mach-versatile/realview.c
index feab66080ba2..36a6f6bc4fdd 100644
--- a/arch/arm/mach-versatile/realview.c
+++ b/arch/arm/mach-versatile/realview.c
@@ -4,14 +4,11 @@
  *
  * Author: Linus Walleij <linus.walleij@linaro.org>
  */
-#include <linux/of_platform.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/cache-l2x0.h>
 
 static const char *const realview_dt_platform_compat[] __initconst = {
 	"arm,realview-eb",
 	"arm,realview-pb1176",
-	"arm,realview-pb11mp",
 	"arm,realview-pba8",
 	"arm,realview-pbx",
 	NULL,
diff --git a/arch/arm/mach-versatile/spc.c b/arch/arm/mach-versatile/spc.c
index 5e44170e1a9a..812db32448fc 100644
--- a/arch/arm/mach-versatile/spc.c
+++ b/arch/arm/mach-versatile/spc.c
@@ -73,7 +73,7 @@
 
 /*
  * Even though the SPC takes max 3-5 ms to complete any OPP/COMMS
- * operation, the operation could start just before jiffie is about
+ * operation, the operation could start just before jiffy is about
  * to be incremented. So setting timeout value of 20ms = 2jiffies@100Hz
  */
 #define TIMEOUT_US	20000
@@ -497,12 +497,13 @@ static unsigned long spc_recalc_rate(struct clk_hw *hw,
 	return freq * 1000;
 }
 
-static long spc_round_rate(struct clk_hw *hw, unsigned long drate,
-		unsigned long *parent_rate)
+static int spc_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
 {
 	struct clk_spc *spc = to_clk_spc(hw);
 
-	return ve_spc_round_performance(spc->cluster, drate);
+	req->rate = ve_spc_round_performance(spc->cluster, req->rate);
+
+	return 0;
 }
 
 static int spc_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -515,7 +516,7 @@ static int spc_set_rate(struct clk_hw *hw, unsigned long rate,
 
 static struct clk_ops clk_spc_ops = {
 	.recalc_rate = spc_recalc_rate,
-	.round_rate = spc_round_rate,
+	.determine_rate = spc_determine_rate,
 	.set_rate = spc_set_rate,
 };
 
diff --git a/arch/arm/mach-versatile/versatile.c b/arch/arm/mach-versatile/versatile.c
index 02ba68abe533..7ef03d0c224d 100644
--- a/arch/arm/mach-versatile/versatile.c
+++ b/arch/arm/mach-versatile/versatile.c
@@ -53,7 +53,7 @@
 
 static void __iomem *versatile_sys_base;
 
-unsigned int mmc_status(struct device *dev)
+static unsigned int mmc_status(struct device *dev)
 {
 	struct amba_device *adev = container_of(dev, struct amba_device, dev);
 	u32 mask;
diff --git a/arch/arm/mach-vt8500/Makefile.boot b/arch/arm/mach-vt8500/Makefile.boot
deleted file mode 100644
index 883985f4b6c1..000000000000
--- a/arch/arm/mach-vt8500/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x01000000
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 0ab40087ae1c..1d294255d708 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -141,7 +141,7 @@ static void __init vt8500_init(void)
 			pr_err("%s:ioremap(power_off) failed\n", __func__);
 	}
 	if (pmc_base)
-		pm_power_off = &vt8500_power_off;
+		register_platform_power_off(vt8500_power_off);
 	else
 		pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__);
 }
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index 60e662324699..83a79d0c0bec 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -9,7 +9,6 @@
 #ifndef __MACH_ZYNQ_COMMON_H__
 #define __MACH_ZYNQ_COMMON_H__
 
-extern int zynq_slcr_init(void);
 extern int zynq_early_slcr_init(void);
 extern void zynq_slcr_cpu_stop(int cpu);
 extern void zynq_slcr_cpu_start(int cpu);
diff --git a/arch/arm/mach-zynq/pm.c b/arch/arm/mach-zynq/pm.c
index 8ba450ab559c..61ad965ef3ac 100644
--- a/arch/arm/mach-zynq/pm.c
+++ b/arch/arm/mach-zynq/pm.c
@@ -8,8 +8,8 @@
  */
 
 #include <linux/io.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_device.h>
 #include "common.h"
 
 /* register offsets */
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index 37707614885a..6aae14b0736c 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -10,7 +10,6 @@
 #include <linux/mfd/syscon.h>
 #include <linux/of_address.h>
 #include <linux/regmap.h>
-#include <linux/clk/zynq.h>
 #include "common.h"
 
 /* register offsets */
@@ -146,7 +145,7 @@ void zynq_slcr_cpu_stop(int cpu)
 }
 
 /**
- * zynq_slcr_cpu_state - Read/write cpu state
+ * zynq_slcr_cpu_state_read - Read cpu state
  * @cpu:	cpu number
  *
  * SLCR_REBOOT_STATUS save upper 2 bits (31/30 cpu states for cpu0 and cpu1)
@@ -165,7 +164,7 @@ bool zynq_slcr_cpu_state_read(int cpu)
 }
 
 /**
- * zynq_slcr_cpu_state - Read/write cpu state
+ * zynq_slcr_cpu_state_write - Write cpu state
  * @cpu:	cpu number
  * @die:	cpu state - true if cpu is going to die
  *
@@ -213,6 +212,7 @@ int __init zynq_early_slcr_init(void)
 	zynq_slcr_regmap = syscon_regmap_lookup_by_compatible("xlnx,zynq-slcr");
 	if (IS_ERR(zynq_slcr_regmap)) {
 		pr_err("%s: failed to find zynq-slcr\n", __func__);
+		of_node_put(np);
 		return -ENODEV;
 	}
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index fc439c2c16f8..7b27ee9482b3 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -403,7 +403,7 @@ config CPU_V6K
 	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V6 if MMU
 
-# ARMv7
+# ARMv7 and ARMv8 architectures
 config CPU_V7
 	bool
 	select CPU_32v6K
@@ -712,7 +712,7 @@ config ARM_VIRT_EXT
 	  assistance.
 
 	  A compliant bootloader is required in order to make maximum
-	  use of this feature.  Refer to Documentation/arm/booting.rst for
+	  use of this feature.  Refer to Documentation/arch/arm/booting.rst for
 	  details.
 
 config SWP_EMULATE
@@ -743,7 +743,7 @@ config SWP_EMULATE
 	  If unsure, say Y.
 
 choice
-	prompt "CPU Endianess"
+	prompt "CPU Endianness"
 	default CPU_LITTLE_ENDIAN
 
 config CPU_LITTLE_ENDIAN
@@ -904,7 +904,7 @@ config KUSER_HELPERS
 	  the CPU type fitted to the system.  This permits binaries to be
 	  run on ARMv4 through to ARMv7 without modification.
 
-	  See Documentation/arm/kernel_user_helpers.rst for details.
+	  See Documentation/arch/arm/kernel_user_helpers.rst for details.
 
 	  However, the fixed address nature of these helpers can be used
 	  by ROP (return orientated programming) authors when creating
@@ -926,7 +926,6 @@ config VDSO
 	default y if ARM_ARCH_TIMER
 	select HAVE_GENERIC_VDSO
 	select GENERIC_TIME_VSYSCALL
-	select GENERIC_VDSO_32
 	select GENERIC_GETTIMEOFDAY
 	help
 	  Place in the process address space an ELF shared object
@@ -937,24 +936,6 @@ config VDSO
 	  You must have glibc 2.22 or later for programs to seamlessly
 	  take advantage of this.
 
-config DMA_CACHE_RWFO
-	bool "Enable read/write for ownership DMA cache maintenance"
-	depends on CPU_V6K && SMP
-	default y
-	help
-	  The Snoop Control Unit on ARM11MPCore does not detect the
-	  cache maintenance operations and the dma_{map,unmap}_area()
-	  functions may leave stale cache entries on other CPUs. By
-	  enabling this option, Read or Write For Ownership in the ARMv6
-	  DMA cache maintenance functions is performed. These LDR/STR
-	  instructions change the cache line state to shared or modified
-	  so that the cache operation has the desired effect.
-
-	  Note that the workaround is only valid on processors that do
-	  not perform speculative loads into the D-cache. For such
-	  processors, if cache maintenance operations are not broadcast
-	  in hardware, other workarounds are needed (e.g. cache
-	  maintenance broadcasting in software via FIQ).
 
 config OUTER_CACHE
 	bool
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 3510503bc5e6..1e2201013371 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -21,7 +21,6 @@ KASAN_SANITIZE_physaddr.o	:= n
 obj-$(CONFIG_DEBUG_VIRTUAL)	+= physaddr.o
 
 obj-$(CONFIG_ALIGNMENT_TRAP)	+= alignment.o
-obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_ARM_PV_FIXUP)	+= pv-fixup-asm.o
 
 obj-$(CONFIG_CPU_ABRT_NOMMU)	+= abort-nommu.o
@@ -33,9 +32,6 @@ obj-$(CONFIG_CPU_ABRT_EV5TJ)	+= abort-ev5tj.o
 obj-$(CONFIG_CPU_ABRT_EV6)	+= abort-ev6.o
 obj-$(CONFIG_CPU_ABRT_EV7)	+= abort-ev7.o
 
-AFLAGS_abort-ev6.o	:=-Wa,-march=armv6k
-AFLAGS_abort-ev7.o	:=-Wa,-march=armv7-a
-
 obj-$(CONFIG_CPU_PABRT_LEGACY)	+= pabort-legacy.o
 obj-$(CONFIG_CPU_PABRT_V6)	+= pabort-v6.o
 obj-$(CONFIG_CPU_PABRT_V7)	+= pabort-v7.o
@@ -48,10 +44,7 @@ obj-$(CONFIG_CPU_CACHE_V7)	+= cache-v7.o
 obj-$(CONFIG_CPU_CACHE_FA)	+= cache-fa.o
 obj-$(CONFIG_CPU_CACHE_NOP)	+= cache-nop.o
 obj-$(CONFIG_CPU_CACHE_V7M)	+= cache-v7m.o
-
-AFLAGS_cache-v6.o	:=-Wa,-march=armv6
-AFLAGS_cache-v7.o	:=-Wa,-march=armv7-a
-AFLAGS_cache-v7m.o	:=-Wa,-march=armv7-m
+obj-y				+= cache.o
 
 obj-$(CONFIG_CPU_COPY_V4WT)	+= copypage-v4wt.o
 obj-$(CONFIG_CPU_COPY_V4WB)	+= copypage-v4wb.o
@@ -62,8 +55,6 @@ obj-$(CONFIG_CPU_XSCALE)	+= copypage-xscale.o
 obj-$(CONFIG_CPU_XSC3)		+= copypage-xsc3.o
 obj-$(CONFIG_CPU_COPY_FA)	+= copypage-fa.o
 
-CFLAGS_copypage-feroceon.o := -march=armv5te
-
 obj-$(CONFIG_CPU_TLB_V4WT)	+= tlb-v4.o
 obj-$(CONFIG_CPU_TLB_V4WB)	+= tlb-v4wb.o
 obj-$(CONFIG_CPU_TLB_V4WBI)	+= tlb-v4wbi.o
@@ -71,9 +62,7 @@ obj-$(CONFIG_CPU_TLB_FEROCEON)	+= tlb-v4wbi.o	# reuse v4wbi TLB functions
 obj-$(CONFIG_CPU_TLB_V6)	+= tlb-v6.o
 obj-$(CONFIG_CPU_TLB_V7)	+= tlb-v7.o
 obj-$(CONFIG_CPU_TLB_FA)	+= tlb-fa.o
-
-AFLAGS_tlb-v6.o		:=-Wa,-march=armv6
-AFLAGS_tlb-v7.o		:=-Wa,-march=armv7-a
+obj-y				+= tlb.o
 
 obj-$(CONFIG_CPU_ARM7TDMI)	+= proc-arm7tdmi.o
 obj-$(CONFIG_CPU_ARM720T)	+= proc-arm720.o
@@ -100,9 +89,7 @@ obj-$(CONFIG_CPU_V6)		+= proc-v6.o
 obj-$(CONFIG_CPU_V6K)		+= proc-v6.o
 obj-$(CONFIG_CPU_V7)		+= proc-v7.o proc-v7-bugs.o
 obj-$(CONFIG_CPU_V7M)		+= proc-v7m.o
-
-AFLAGS_proc-v6.o	:=-Wa,-march=armv6
-AFLAGS_proc-v7.o	:=-Wa,-march=armv7-a
+obj-$(CONFIG_CFI)		+= proc.o
 
 obj-$(CONFIG_OUTER_CACHE)	+= l2c-common.o
 obj-$(CONFIG_CACHE_B15_RAC)	+= cache-b15-rac.o
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index c58bf8b43fea..836dc1299243 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -16,6 +16,7 @@
  * abort here if the I-TLB and D-TLB aren't seeing the same
  * picture.  Unfortunately, this does happen.  We live with it.
  */
+	.arch	armv6k
 	.align	5
 ENTRY(v6_early_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
diff --git a/arch/arm/mm/abort-ev7.S b/arch/arm/mm/abort-ev7.S
index f81bceacc660..53fb41c24774 100644
--- a/arch/arm/mm/abort-ev7.S
+++ b/arch/arm/mm/abort-ev7.S
@@ -12,6 +12,7 @@
  *
  * Purpose : obtain information about current aborted instruction.
  */
+	.arch	armv7-a
 	.align	5
 ENTRY(v7_early_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index f8dd0b3cc8e0..812380f30ae3 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -19,10 +19,11 @@
 #include <linux/init.h>
 #include <linux/sched/signal.h>
 #include <linux/uaccess.h>
+#include <linux/unaligned.h>
 
 #include <asm/cp15.h>
 #include <asm/system_info.h>
-#include <asm/unaligned.h>
+#include <asm/system_misc.h>
 #include <asm/opcodes.h>
 
 #include "fault.h"
@@ -809,6 +810,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	int thumb2_32b = 0;
 	int fault;
 
+	if (addr >= TASK_SIZE && user_mode(regs))
+		harden_branch_predictor();
+
 	if (interrupts_enabled(regs))
 		local_irq_enable();
 
diff --git a/arch/arm/mm/cache-b15-rac.c b/arch/arm/mm/cache-b15-rac.c
index 9c1172f26885..6f63b90f9e1a 100644
--- a/arch/arm/mm/cache-b15-rac.c
+++ b/arch/arm/mm/cache-b15-rac.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2015-2016 Broadcom
  */
 
+#include <linux/cfi_types.h>
 #include <linux/err.h>
 #include <linux/spinlock.h>
 #include <linux/io.h>
diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S
index 3a464d1649b4..e1641799569b 100644
--- a/arch/arm/mm/cache-fa.S
+++ b/arch/arm/mm/cache-fa.S
@@ -12,8 +12,8 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <asm/assembler.h>
-#include <asm/memory.h>
 #include <asm/page.h>
 
 #include "proc-macros.S"
@@ -40,11 +40,11 @@
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
-ENTRY(fa_flush_icache_all)
+SYM_TYPED_FUNC_START(fa_flush_icache_all)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	ret	lr
-ENDPROC(fa_flush_icache_all)
+SYM_FUNC_END(fa_flush_icache_all)
 
 /*
  *	flush_user_cache_all()
@@ -52,14 +52,14 @@ ENDPROC(fa_flush_icache_all)
  *	Clean and invalidate all cache entries in a particular address
  *	space.
  */
-ENTRY(fa_flush_user_cache_all)
-	/* FALLTHROUGH */
+SYM_FUNC_ALIAS(fa_flush_user_cache_all, fa_flush_kern_cache_all)
+
 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
-ENTRY(fa_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(fa_flush_kern_cache_all)
 	mov	ip, #0
 	mov	r2, #VM_EXEC
 __flush_whole_cache:
@@ -70,6 +70,7 @@ __flush_whole_cache:
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain write buffer
 	mcrne	p15, 0, ip, c7, c5, 4		@ prefetch flush
 	ret	lr
+SYM_FUNC_END(fa_flush_kern_cache_all)
 
 /*
  *	flush_user_cache_range(start, end, flags)
@@ -81,7 +82,7 @@ __flush_whole_cache:
  *	- end	- end address (exclusive, page aligned)
  *	- flags	- vma_area_struct flags describing address space
  */
-ENTRY(fa_flush_user_cache_range)
+SYM_TYPED_FUNC_START(fa_flush_user_cache_range)
 	mov	ip, #0
 	sub	r3, r1, r0			@ calculate total size
 	cmp	r3, #CACHE_DLIMIT		@ total size >= limit?
@@ -98,6 +99,7 @@ ENTRY(fa_flush_user_cache_range)
 	mcrne	p15, 0, ip, c7, c10, 4		@ data write barrier
 	mcrne	p15, 0, ip, c7, c5, 4		@ prefetch flush
 	ret	lr
+SYM_FUNC_END(fa_flush_user_cache_range)
 
 /*
  *	coherent_kern_range(start, end)
@@ -109,8 +111,11 @@ ENTRY(fa_flush_user_cache_range)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(fa_coherent_kern_range)
-	/* fall through */
+SYM_TYPED_FUNC_START(fa_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	fa_coherent_user_range
+#endif
+SYM_FUNC_END(fa_coherent_kern_range)
 
 /*
  *	coherent_user_range(start, end)
@@ -122,7 +127,7 @@ ENTRY(fa_coherent_kern_range)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(fa_coherent_user_range)
+SYM_TYPED_FUNC_START(fa_coherent_user_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
 	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
@@ -134,6 +139,7 @@ ENTRY(fa_coherent_user_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
 	mcr	p15, 0, r0, c7, c5, 4		@ prefetch flush
 	ret	lr
+SYM_FUNC_END(fa_coherent_user_range)
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -144,7 +150,7 @@ ENTRY(fa_coherent_user_range)
  *	- addr	- kernel address
  *	- size	- size of region
  */
-ENTRY(fa_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(fa_flush_kern_dcache_area)
 	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
 	add	r0, r0, #CACHE_DLINESIZE
@@ -154,6 +160,7 @@ ENTRY(fa_flush_kern_dcache_area)
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
 	ret	lr
+SYM_FUNC_END(fa_flush_kern_dcache_area)
 
 /*
  *	dma_inv_range(start, end)
@@ -204,7 +211,7 @@ fa_dma_clean_range:
  *	- start   - virtual start address of region
  *	- end     - virtual end address of region
  */
-ENTRY(fa_dma_flush_range)
+SYM_TYPED_FUNC_START(fa_dma_flush_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -213,6 +220,7 @@ ENTRY(fa_dma_flush_range)
 	mov	r0, #0	
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
 	ret	lr
+SYM_FUNC_END(fa_dma_flush_range)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -220,13 +228,13 @@ ENTRY(fa_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(fa_dma_map_area)
+SYM_TYPED_FUNC_START(fa_dma_map_area)
 	add	r1, r1, r0
 	cmp	r2, #DMA_TO_DEVICE
 	beq	fa_dma_clean_range
 	bcs	fa_dma_inv_range
 	b	fa_dma_flush_range
-ENDPROC(fa_dma_map_area)
+SYM_FUNC_END(fa_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -234,14 +242,6 @@ ENDPROC(fa_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(fa_dma_unmap_area)
+SYM_TYPED_FUNC_START(fa_dma_unmap_area)
 	ret	lr
-ENDPROC(fa_dma_unmap_area)
-
-	.globl	fa_flush_kern_cache_louis
-	.equ	fa_flush_kern_cache_louis, fa_flush_kern_cache_all
-
-	__INITDATA
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions fa
+SYM_FUNC_END(fa_dma_unmap_area)
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 25dbd84a1aaf..2bfefb252ffd 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -295,7 +295,7 @@ static inline u32 read_extra_features(void)
 	return u;
 }
 
-static inline void write_extra_features(u32 u)
+static inline void __init write_extra_features(u32 u)
 {
 	__asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
 }
diff --git a/arch/arm/mm/cache-l2x0-pmu.c b/arch/arm/mm/cache-l2x0-pmu.c
index 993fefdc167a..93ef0502b7ff 100644
--- a/arch/arm/mm/cache-l2x0-pmu.c
+++ b/arch/arm/mm/cache-l2x0-pmu.c
@@ -539,8 +539,7 @@ static __init int l2x0_pmu_init(void)
 	 * at higher frequencies.
 	 */
 	l2x0_pmu_poll_period = ms_to_ktime(1000);
-	hrtimer_init(&l2x0_pmu_hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	l2x0_pmu_hrtimer.function = l2x0_pmu_poll;
+	hrtimer_setup(&l2x0_pmu_hrtimer, l2x0_pmu_poll, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 
 	cpumask_set_cpu(0, &pmu_cpu);
 	ret = cpuhp_setup_state_nocalls(CPUHP_AP_PERF_ARM_L2X0_ONLINE,
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 43d91bfd2360..470867160076 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -13,6 +13,7 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/string_choices.h>
 
 #include <asm/cacheflush.h>
 #include <asm/cp15.h>
@@ -667,9 +668,9 @@ static void __init l2c310_enable(void __iomem *base, unsigned num_lock)
 		u32 power_ctrl;
 
 		power_ctrl = readl_relaxed(base + L310_POWER_CTRL);
-		pr_info("L2C-310 dynamic clock gating %sabled, standby mode %sabled\n",
-			power_ctrl & L310_DYNAMIC_CLK_GATING_EN ? "en" : "dis",
-			power_ctrl & L310_STNDBY_MODE_EN ? "en" : "dis");
+		pr_info("L2C-310 dynamic clock gating %s, standby mode %s\n",
+			str_enabled_disabled(power_ctrl & L310_DYNAMIC_CLK_GATING_EN),
+			str_enabled_disabled(power_ctrl & L310_STNDBY_MODE_EN));
 	}
 
 	if (aux & L310_AUX_CTRL_FULL_LINE_ZERO)
diff --git a/arch/arm/mm/cache-nop.S b/arch/arm/mm/cache-nop.S
index 72d939ef8798..f68dde2014ee 100644
--- a/arch/arm/mm/cache-nop.S
+++ b/arch/arm/mm/cache-nop.S
@@ -1,47 +1,52 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <asm/assembler.h>
 
 #include "proc-macros.S"
 
-ENTRY(nop_flush_icache_all)
+/*
+ * These are all open-coded instead of aliased, to make clear
+ * what is going on here: all functions are stubbed out.
+ */
+SYM_TYPED_FUNC_START(nop_flush_icache_all)
 	ret	lr
-ENDPROC(nop_flush_icache_all)
+SYM_FUNC_END(nop_flush_icache_all)
 
-	.globl nop_flush_kern_cache_all
-	.equ nop_flush_kern_cache_all, nop_flush_icache_all
-
-	.globl nop_flush_kern_cache_louis
-	.equ nop_flush_kern_cache_louis, nop_flush_icache_all
+SYM_TYPED_FUNC_START(nop_flush_kern_cache_all)
+	ret	lr
+SYM_FUNC_END(nop_flush_kern_cache_all)
 
-	.globl nop_flush_user_cache_all
-	.equ nop_flush_user_cache_all, nop_flush_icache_all
+SYM_TYPED_FUNC_START(nop_flush_user_cache_all)
+	ret	lr
+SYM_FUNC_END(nop_flush_user_cache_all)
 
-	.globl nop_flush_user_cache_range
-	.equ nop_flush_user_cache_range, nop_flush_icache_all
+SYM_TYPED_FUNC_START(nop_flush_user_cache_range)
+	ret	lr
+SYM_FUNC_END(nop_flush_user_cache_range)
 
-	.globl nop_coherent_kern_range
-	.equ nop_coherent_kern_range, nop_flush_icache_all
+SYM_TYPED_FUNC_START(nop_coherent_kern_range)
+	ret	lr
+SYM_FUNC_END(nop_coherent_kern_range)
 
-ENTRY(nop_coherent_user_range)
+SYM_TYPED_FUNC_START(nop_coherent_user_range)
 	mov	r0, 0
 	ret	lr
-ENDPROC(nop_coherent_user_range)
-
-	.globl nop_flush_kern_dcache_area
-	.equ nop_flush_kern_dcache_area, nop_flush_icache_all
+SYM_FUNC_END(nop_coherent_user_range)
 
-	.globl nop_dma_flush_range
-	.equ nop_dma_flush_range, nop_flush_icache_all
-
-	.globl nop_dma_map_area
-	.equ nop_dma_map_area, nop_flush_icache_all
+SYM_TYPED_FUNC_START(nop_flush_kern_dcache_area)
+	ret	lr
+SYM_FUNC_END(nop_flush_kern_dcache_area)
 
-	.globl nop_dma_unmap_area
-	.equ nop_dma_unmap_area, nop_flush_icache_all
+SYM_TYPED_FUNC_START(nop_dma_flush_range)
+	ret	lr
+SYM_FUNC_END(nop_dma_flush_range)
 
-	__INITDATA
+SYM_TYPED_FUNC_START(nop_dma_map_area)
+	ret	lr
+SYM_FUNC_END(nop_dma_map_area)
 
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions nop
+SYM_TYPED_FUNC_START(nop_dma_unmap_area)
+	ret	lr
+SYM_FUNC_END(nop_dma_unmap_area)
diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c
index b1e1aba602f7..bfe166ccace0 100644
--- a/arch/arm/mm/cache-tauros2.c
+++ b/arch/arm/mm/cache-tauros2.c
@@ -177,7 +177,7 @@ static inline void __init write_actlr(u32 actlr)
 	__asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr));
 }
 
-static void enable_extra_feature(unsigned int features)
+static void __init enable_extra_feature(unsigned int features)
 {
 	u32 u;
 
diff --git a/arch/arm/mm/cache-uniphier.c b/arch/arm/mm/cache-uniphier.c
index ff2881458504..84a2f17ff32d 100644
--- a/arch/arm/mm/cache-uniphier.c
+++ b/arch/arm/mm/cache-uniphier.c
@@ -58,11 +58,13 @@
 		((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE)
 
 /**
- * uniphier_cache_data - UniPhier outer cache specific data
+ * struct uniphier_cache_data - UniPhier outer cache specific data
  *
  * @ctrl_base: virtual base address of control registers
  * @rev_base: virtual base address of revision registers
  * @op_base: virtual base address of operation registers
+ * @way_ctrl_base: virtual address of the way control registers for this
+ *	SoC revision
  * @way_mask: each bit specifies if the way is present
  * @nsets: number of associativity sets
  * @line_size: line size in bytes
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index 7787057e4990..001d7042bd46 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -6,6 +6,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <asm/assembler.h>
 #include <asm/page.h>
 #include "proc-macros.S"
@@ -15,9 +16,9 @@
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
-ENTRY(v4_flush_icache_all)
+SYM_TYPED_FUNC_START(v4_flush_icache_all)
 	ret	lr
-ENDPROC(v4_flush_icache_all)
+SYM_FUNC_END(v4_flush_icache_all)
 
 /*
  *	flush_user_cache_all()
@@ -27,21 +28,22 @@ ENDPROC(v4_flush_icache_all)
  *
  *	- mm	- mm_struct describing address space
  */
-ENTRY(v4_flush_user_cache_all)
-	/* FALLTHROUGH */
+SYM_FUNC_ALIAS(v4_flush_user_cache_all, v4_flush_kern_cache_all)
+
 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
-ENTRY(v4_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(v4_flush_kern_cache_all)
 #ifdef CONFIG_CPU_CP15
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c7, 0		@ flush ID cache
 	ret	lr
 #else
-	/* FALLTHROUGH */
+	ret	lr
 #endif
+SYM_FUNC_END(v4_flush_kern_cache_all)
 
 /*
  *	flush_user_cache_range(start, end, flags)
@@ -53,14 +55,15 @@ ENTRY(v4_flush_kern_cache_all)
  *	- end	- end address (exclusive, may not be aligned)
  *	- flags	- vma_area_struct flags describing address space
  */
-ENTRY(v4_flush_user_cache_range)
+SYM_TYPED_FUNC_START(v4_flush_user_cache_range)
 #ifdef CONFIG_CPU_CP15
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ flush ID cache
 	ret	lr
 #else
-	/* FALLTHROUGH */
+	ret	lr
 #endif
+SYM_FUNC_END(v4_flush_user_cache_range)
 
 /*
  *	coherent_kern_range(start, end)
@@ -72,8 +75,9 @@ ENTRY(v4_flush_user_cache_range)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(v4_coherent_kern_range)
-	/* FALLTHROUGH */
+SYM_TYPED_FUNC_START(v4_coherent_kern_range)
+	ret	lr
+SYM_FUNC_END(v4_coherent_kern_range)
 
 /*
  *	coherent_user_range(start, end)
@@ -85,9 +89,10 @@ ENTRY(v4_coherent_kern_range)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(v4_coherent_user_range)
+SYM_TYPED_FUNC_START(v4_coherent_user_range)
 	mov	r0, #0
 	ret	lr
+SYM_FUNC_END(v4_coherent_user_range)
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -98,8 +103,11 @@ ENTRY(v4_coherent_user_range)
  *	- addr	- kernel address
  *	- size	- region size
  */
-ENTRY(v4_flush_kern_dcache_area)
-	/* FALLTHROUGH */
+SYM_TYPED_FUNC_START(v4_flush_kern_dcache_area)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	v4_dma_flush_range
+#endif
+SYM_FUNC_END(v4_flush_kern_dcache_area)
 
 /*
  *	dma_flush_range(start, end)
@@ -109,12 +117,13 @@ ENTRY(v4_flush_kern_dcache_area)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(v4_dma_flush_range)
+SYM_TYPED_FUNC_START(v4_dma_flush_range)
 #ifdef CONFIG_CPU_CP15
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c7, 0		@ flush ID cache
 #endif
 	ret	lr
+SYM_FUNC_END(v4_dma_flush_range)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -122,10 +131,11 @@ ENTRY(v4_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(v4_dma_unmap_area)
+SYM_TYPED_FUNC_START(v4_dma_unmap_area)
 	teq	r2, #DMA_TO_DEVICE
 	bne	v4_dma_flush_range
-	/* FALLTHROUGH */
+	ret	lr
+SYM_FUNC_END(v4_dma_unmap_area)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -133,15 +143,6 @@ ENTRY(v4_dma_unmap_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(v4_dma_map_area)
+SYM_TYPED_FUNC_START(v4_dma_map_area)
 	ret	lr
-ENDPROC(v4_dma_unmap_area)
-ENDPROC(v4_dma_map_area)
-
-	.globl	v4_flush_kern_cache_louis
-	.equ	v4_flush_kern_cache_louis, v4_flush_kern_cache_all
-
-	__INITDATA
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions v4
+SYM_FUNC_END(v4_dma_map_area)
diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S
index 905ac2fa2b1e..874fe5310f9a 100644
--- a/arch/arm/mm/cache-v4wb.S
+++ b/arch/arm/mm/cache-v4wb.S
@@ -6,8 +6,8 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <asm/assembler.h>
-#include <asm/memory.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
@@ -54,11 +54,11 @@ flush_base:
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
-ENTRY(v4wb_flush_icache_all)
+SYM_TYPED_FUNC_START(v4wb_flush_icache_all)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	ret	lr
-ENDPROC(v4wb_flush_icache_all)
+SYM_FUNC_END(v4wb_flush_icache_all)
 
 /*
  *	flush_user_cache_all()
@@ -66,14 +66,14 @@ ENDPROC(v4wb_flush_icache_all)
  *	Clean and invalidate all cache entries in a particular address
  *	space.
  */
-ENTRY(v4wb_flush_user_cache_all)
-	/* FALLTHROUGH */
+SYM_FUNC_ALIAS(v4wb_flush_user_cache_all, v4wb_flush_kern_cache_all)
+
 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
-ENTRY(v4wb_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(v4wb_flush_kern_cache_all)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
 __flush_whole_cache:
@@ -94,6 +94,7 @@ __flush_whole_cache:
 #endif
 	mcr	p15, 0, ip, c7, c10, 4		@ drain write buffer
 	ret	lr
+SYM_FUNC_END(v4wb_flush_kern_cache_all)
 
 /*
  *	flush_user_cache_range(start, end, flags)
@@ -105,7 +106,7 @@ __flush_whole_cache:
  *	- end	- end address (exclusive, page aligned)
  *	- flags	- vma_area_struct flags describing address space
  */
-ENTRY(v4wb_flush_user_cache_range)
+SYM_TYPED_FUNC_START(v4wb_flush_user_cache_range)
 	mov	ip, #0
 	sub	r3, r1, r0			@ calculate total size
 	tst	r2, #VM_EXEC			@ executable region?
@@ -122,6 +123,7 @@ ENTRY(v4wb_flush_user_cache_range)
 	tst	r2, #VM_EXEC
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain write buffer
 	ret	lr
+SYM_FUNC_END(v4wb_flush_user_cache_range)
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -132,9 +134,12 @@ ENTRY(v4wb_flush_user_cache_range)
  *	- addr	- kernel address
  *	- size	- region size
  */
-ENTRY(v4wb_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(v4wb_flush_kern_dcache_area)
 	add	r1, r0, r1
-	/* fall through */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	v4wb_coherent_user_range
+#endif
+SYM_FUNC_END(v4wb_flush_kern_dcache_area)
 
 /*
  *	coherent_kern_range(start, end)
@@ -146,8 +151,11 @@ ENTRY(v4wb_flush_kern_dcache_area)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(v4wb_coherent_kern_range)
-	/* fall through */
+SYM_TYPED_FUNC_START(v4wb_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	v4wb_coherent_user_range
+#endif
+SYM_FUNC_END(v4wb_coherent_kern_range)
 
 /*
  *	coherent_user_range(start, end)
@@ -159,7 +167,7 @@ ENTRY(v4wb_coherent_kern_range)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(v4wb_coherent_user_range)
+SYM_TYPED_FUNC_START(v4wb_coherent_user_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
@@ -170,7 +178,7 @@ ENTRY(v4wb_coherent_user_range)
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
-
+SYM_FUNC_END(v4wb_coherent_user_range)
 
 /*
  *	dma_inv_range(start, end)
@@ -232,13 +240,13 @@ v4wb_dma_clean_range:
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(v4wb_dma_map_area)
+SYM_TYPED_FUNC_START(v4wb_dma_map_area)
 	add	r1, r1, r0
 	cmp	r2, #DMA_TO_DEVICE
 	beq	v4wb_dma_clean_range
 	bcs	v4wb_dma_inv_range
 	b	v4wb_dma_flush_range
-ENDPROC(v4wb_dma_map_area)
+SYM_FUNC_END(v4wb_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -246,14 +254,6 @@ ENDPROC(v4wb_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(v4wb_dma_unmap_area)
+SYM_TYPED_FUNC_START(v4wb_dma_unmap_area)
 	ret	lr
-ENDPROC(v4wb_dma_unmap_area)
-
-	.globl	v4wb_flush_kern_cache_louis
-	.equ	v4wb_flush_kern_cache_louis, v4wb_flush_kern_cache_all
-
-	__INITDATA
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions v4wb
+SYM_FUNC_END(v4wb_dma_unmap_area)
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index 0b290c25a99d..2ee62e4b2b07 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -10,6 +10,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <asm/assembler.h>
 #include <asm/page.h>
 #include "proc-macros.S"
@@ -43,11 +44,11 @@
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
-ENTRY(v4wt_flush_icache_all)
+SYM_TYPED_FUNC_START(v4wt_flush_icache_all)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	ret	lr
-ENDPROC(v4wt_flush_icache_all)
+SYM_FUNC_END(v4wt_flush_icache_all)
 
 /*
  *	flush_user_cache_all()
@@ -55,14 +56,14 @@ ENDPROC(v4wt_flush_icache_all)
  *	Invalidate all cache entries in a particular address
  *	space.
  */
-ENTRY(v4wt_flush_user_cache_all)
-	/* FALLTHROUGH */
+SYM_FUNC_ALIAS(v4wt_flush_user_cache_all, v4wt_flush_kern_cache_all)
+
 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
-ENTRY(v4wt_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(v4wt_flush_kern_cache_all)
 	mov	r2, #VM_EXEC
 	mov	ip, #0
 __flush_whole_cache:
@@ -70,6 +71,7 @@ __flush_whole_cache:
 	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
 	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
 	ret	lr
+SYM_FUNC_END(v4wt_flush_kern_cache_all)
 
 /*
  *	flush_user_cache_range(start, end, flags)
@@ -81,7 +83,7 @@ __flush_whole_cache:
  *	- end	- end address (exclusive, page aligned)
  *	- flags	- vma_area_struct flags describing address space
  */
-ENTRY(v4wt_flush_user_cache_range)
+SYM_TYPED_FUNC_START(v4wt_flush_user_cache_range)
 	sub	r3, r1, r0			@ calculate total size
 	cmp	r3, #CACHE_DLIMIT
 	bhs	__flush_whole_cache
@@ -93,6 +95,7 @@ ENTRY(v4wt_flush_user_cache_range)
 	cmp	r0, r1
 	blo	1b
 	ret	lr
+SYM_FUNC_END(v4wt_flush_user_cache_range)
 
 /*
  *	coherent_kern_range(start, end)
@@ -104,8 +107,11 @@ ENTRY(v4wt_flush_user_cache_range)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(v4wt_coherent_kern_range)
-	/* FALLTRHOUGH */
+SYM_TYPED_FUNC_START(v4wt_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	v4wt_coherent_user_range
+#endif
+SYM_FUNC_END(v4wt_coherent_kern_range)
 
 /*
  *	coherent_user_range(start, end)
@@ -117,7 +123,7 @@ ENTRY(v4wt_coherent_kern_range)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(v4wt_coherent_user_range)
+SYM_TYPED_FUNC_START(v4wt_coherent_user_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -125,6 +131,7 @@ ENTRY(v4wt_coherent_user_range)
 	blo	1b
 	mov	r0, #0
 	ret	lr
+SYM_FUNC_END(v4wt_coherent_user_range)
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -135,11 +142,12 @@ ENTRY(v4wt_coherent_user_range)
  *	- addr	- kernel address
  *	- size	- region size
  */
-ENTRY(v4wt_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(v4wt_flush_kern_dcache_area)
 	mov	r2, #0
 	mcr	p15, 0, r2, c7, c5, 0		@ invalidate I cache
 	add	r1, r0, r1
-	/* fallthrough */
+	b	v4wt_dma_inv_range
+SYM_FUNC_END(v4wt_flush_kern_dcache_area)
 
 /*
  *	dma_inv_range(start, end)
@@ -167,9 +175,10 @@ v4wt_dma_inv_range:
  *
  *	- start  - virtual start address
  *	- end	 - virtual end address
- */
-	.globl	v4wt_dma_flush_range
-	.equ	v4wt_dma_flush_range, v4wt_dma_inv_range
+*/
+SYM_TYPED_FUNC_START(v4wt_dma_flush_range)
+	b	v4wt_dma_inv_range
+SYM_FUNC_END(v4wt_dma_flush_range)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -177,11 +186,12 @@ v4wt_dma_inv_range:
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(v4wt_dma_unmap_area)
+SYM_TYPED_FUNC_START(v4wt_dma_unmap_area)
 	add	r1, r1, r0
 	teq	r2, #DMA_TO_DEVICE
 	bne	v4wt_dma_inv_range
-	/* FALLTHROUGH */
+	ret	lr
+SYM_FUNC_END(v4wt_dma_unmap_area)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -189,15 +199,6 @@ ENTRY(v4wt_dma_unmap_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(v4wt_dma_map_area)
+SYM_TYPED_FUNC_START(v4wt_dma_map_area)
 	ret	lr
-ENDPROC(v4wt_dma_unmap_area)
-ENDPROC(v4wt_dma_map_area)
-
-	.globl	v4wt_flush_kern_cache_louis
-	.equ	v4wt_flush_kern_cache_louis, v4wt_flush_kern_cache_all
-
-	__INITDATA
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions v4wt
+SYM_FUNC_END(v4wt_dma_map_area)
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index f0f65eb073e4..5ceea8965ea1 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -8,6 +8,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <asm/assembler.h>
 #include <asm/errno.h>
 #include <asm/unwind.h>
@@ -19,6 +20,8 @@
 #define D_CACHE_LINE_SIZE	32
 #define BTB_FLUSH_SIZE		8
 
+.arch armv6
+
 /*
  *	v6_flush_icache_all()
  *
@@ -32,7 +35,7 @@
  *	r0 - set to 0
  *	r1 - corrupted
  */
-ENTRY(v6_flush_icache_all)
+SYM_TYPED_FUNC_START(v6_flush_icache_all)
 	mov	r0, #0
 #ifdef CONFIG_ARM_ERRATA_411920
 	mrs	r1, cpsr
@@ -49,7 +52,7 @@ ENTRY(v6_flush_icache_all)
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I-cache
 #endif
 	ret	lr
-ENDPROC(v6_flush_icache_all)
+SYM_FUNC_END(v6_flush_icache_all)
 
 /*
  *	v6_flush_cache_all()
@@ -58,7 +61,7 @@ ENDPROC(v6_flush_icache_all)
  *
  *	It is assumed that:
  */
-ENTRY(v6_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(v6_flush_kern_cache_all)
 	mov	r0, #0
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c14, 0		@ D cache clean+invalidate
@@ -71,6 +74,7 @@ ENTRY(v6_flush_kern_cache_all)
 	mcr	p15, 0, r0, c7, c15, 0		@ Cache clean+invalidate
 #endif
 	ret	lr
+SYM_FUNC_END(v6_flush_kern_cache_all)
 
 /*
  *	v6_flush_cache_all()
@@ -79,8 +83,9 @@ ENTRY(v6_flush_kern_cache_all)
  *
  *	- mm    - mm_struct describing address space
  */
-ENTRY(v6_flush_user_cache_all)
-	/*FALLTHROUGH*/
+SYM_TYPED_FUNC_START(v6_flush_user_cache_all)
+	ret	lr
+SYM_FUNC_END(v6_flush_user_cache_all)
 
 /*
  *	v6_flush_cache_range(start, end, flags)
@@ -94,8 +99,9 @@ ENTRY(v6_flush_user_cache_all)
  *	It is assumed that:
  *	- we have a VIPT cache.
  */
-ENTRY(v6_flush_user_cache_range)
+SYM_TYPED_FUNC_START(v6_flush_user_cache_range)
 	ret	lr
+SYM_FUNC_END(v6_flush_user_cache_range)
 
 /*
  *	v6_coherent_kern_range(start,end)
@@ -110,8 +116,11 @@ ENTRY(v6_flush_user_cache_range)
  *	It is assumed that:
  *	- the Icache does not read data from the write buffer
  */
-ENTRY(v6_coherent_kern_range)
-	/* FALLTHROUGH */
+SYM_TYPED_FUNC_START(v6_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	v6_coherent_user_range
+#endif
+SYM_FUNC_END(v6_coherent_kern_range)
 
 /*
  *	v6_coherent_user_range(start,end)
@@ -126,7 +135,7 @@ ENTRY(v6_coherent_kern_range)
  *	It is assumed that:
  *	- the Icache does not read data from the write buffer
  */
-ENTRY(v6_coherent_user_range)
+SYM_TYPED_FUNC_START(v6_coherent_user_range)
  UNWIND(.fnstart		)
 #ifdef HARVARD_CACHE
 	bic	r0, r0, #CACHE_LINE_SIZE - 1
@@ -157,8 +166,7 @@ ENTRY(v6_coherent_user_range)
 	mov	r0, #-EFAULT
 	ret	lr
  UNWIND(.fnend		)
-ENDPROC(v6_coherent_user_range)
-ENDPROC(v6_coherent_kern_range)
+SYM_FUNC_END(v6_coherent_user_range)
 
 /*
  *	v6_flush_kern_dcache_area(void *addr, size_t size)
@@ -169,7 +177,7 @@ ENDPROC(v6_coherent_kern_range)
  *	- addr	- kernel address
  *	- size	- region size
  */
-ENTRY(v6_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(v6_flush_kern_dcache_area)
 	add	r1, r0, r1
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
@@ -186,7 +194,7 @@ ENTRY(v6_flush_kern_dcache_area)
 	mcr	p15, 0, r0, c7, c10, 4
 #endif
 	ret	lr
-
+SYM_FUNC_END(v6_flush_kern_dcache_area)
 
 /*
  *	v6_dma_inv_range(start,end)
@@ -199,10 +207,6 @@ ENTRY(v6_flush_kern_dcache_area)
  *	- end     - virtual end address of region
  */
 v6_dma_inv_range:
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrb	r2, [r0]			@ read for ownership
-	strb	r2, [r0]			@ write for ownership
-#endif
 	tst	r0, #D_CACHE_LINE_SIZE - 1
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
@@ -211,10 +215,6 @@ v6_dma_inv_range:
 	mcrne	p15, 0, r0, c7, c11, 1		@ clean unified line
 #endif
 	tst	r1, #D_CACHE_LINE_SIZE - 1
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrbne	r2, [r1, #-1]			@ read for ownership
-	strbne	r2, [r1, #-1]			@ write for ownership
-#endif
 	bic	r1, r1, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
 	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D line
@@ -229,10 +229,6 @@ v6_dma_inv_range:
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrlo	r2, [r0]			@ read for ownership
-	strlo	r2, [r0]			@ write for ownership
-#endif
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
@@ -246,9 +242,6 @@ v6_dma_inv_range:
 v6_dma_clean_range:
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldr	r2, [r0]			@ read for ownership
-#endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D line
 #else
@@ -266,11 +259,7 @@ v6_dma_clean_range:
  *	- start   - virtual start address of region
  *	- end     - virtual end address of region
  */
-ENTRY(v6_dma_flush_range)
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrb	r2, [r0]		@ read for ownership
-	strb	r2, [r0]		@ write for ownership
-#endif
+SYM_TYPED_FUNC_START(v6_dma_flush_range)
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
 #ifdef HARVARD_CACHE
@@ -280,14 +269,11 @@ ENTRY(v6_dma_flush_range)
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrblo	r2, [r0]			@ read for ownership
-	strblo	r2, [r0]			@ write for ownership
-#endif
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
 	ret	lr
+SYM_FUNC_END(v6_dma_flush_range)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -295,18 +281,12 @@ ENTRY(v6_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(v6_dma_map_area)
+SYM_TYPED_FUNC_START(v6_dma_map_area)
 	add	r1, r1, r0
 	teq	r2, #DMA_FROM_DEVICE
 	beq	v6_dma_inv_range
-#ifndef CONFIG_DMA_CACHE_RWFO
 	b	v6_dma_clean_range
-#else
-	teq	r2, #DMA_TO_DEVICE
-	beq	v6_dma_clean_range
-	b	v6_dma_flush_range
-#endif
-ENDPROC(v6_dma_map_area)
+SYM_FUNC_END(v6_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -314,19 +294,9 @@ ENDPROC(v6_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(v6_dma_unmap_area)
-#ifndef CONFIG_DMA_CACHE_RWFO
+SYM_TYPED_FUNC_START(v6_dma_unmap_area)
 	add	r1, r1, r0
 	teq	r2, #DMA_TO_DEVICE
 	bne	v6_dma_inv_range
-#endif
 	ret	lr
-ENDPROC(v6_dma_unmap_area)
-
-	.globl	v6_flush_kern_cache_louis
-	.equ	v6_flush_kern_cache_louis, v6_flush_kern_cache_all
-
-	__INITDATA
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions v6
+SYM_FUNC_END(v6_dma_unmap_area)
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 7c9499b728c4..726681fb7d4d 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -9,6 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <asm/assembler.h>
 #include <asm/errno.h>
 #include <asm/unwind.h>
@@ -16,6 +17,8 @@
 
 #include "proc-macros.S"
 
+.arch armv7-a
+
 #ifdef CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND
 .globl icache_size
 	.data
@@ -78,12 +81,12 @@ ENDPROC(v7_invalidate_l1)
  *	Registers:
  *	r0 - set to 0
  */
-ENTRY(v7_flush_icache_all)
+SYM_TYPED_FUNC_START(v7_flush_icache_all)
 	mov	r0, #0
 	ALT_SMP(mcr	p15, 0, r0, c7, c1, 0)		@ invalidate I-cache inner shareable
 	ALT_UP(mcr	p15, 0, r0, c7, c5, 0)		@ I+BTB cache invalidate
 	ret	lr
-ENDPROC(v7_flush_icache_all)
+SYM_FUNC_END(v7_flush_icache_all)
 
  /*
  *     v7_flush_dcache_louis()
@@ -191,7 +194,7 @@ ENDPROC(v7_flush_dcache_all)
  *  unification in a single instruction.
  *
  */
-ENTRY(v7_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(v7_flush_kern_cache_all)
 	stmfd	sp!, {r4-r6, r9-r10, lr}
 	bl	v7_flush_dcache_all
 	mov	r0, #0
@@ -199,7 +202,7 @@ ENTRY(v7_flush_kern_cache_all)
 	ALT_UP(mcr	p15, 0, r0, c7, c5, 0)	@ I+BTB cache invalidate
 	ldmfd	sp!, {r4-r6, r9-r10, lr}
 	ret	lr
-ENDPROC(v7_flush_kern_cache_all)
+SYM_FUNC_END(v7_flush_kern_cache_all)
 
  /*
  *     v7_flush_kern_cache_louis(void)
@@ -207,7 +210,7 @@ ENDPROC(v7_flush_kern_cache_all)
  *     Flush the data cache up to Level of Unification Inner Shareable.
  *     Invalidate the I-cache to the point of unification.
  */
-ENTRY(v7_flush_kern_cache_louis)
+SYM_TYPED_FUNC_START(v7_flush_kern_cache_louis)
 	stmfd	sp!, {r4-r6, r9-r10, lr}
 	bl	v7_flush_dcache_louis
 	mov	r0, #0
@@ -215,7 +218,7 @@ ENTRY(v7_flush_kern_cache_louis)
 	ALT_UP(mcr	p15, 0, r0, c7, c5, 0)	@ I+BTB cache invalidate
 	ldmfd	sp!, {r4-r6, r9-r10, lr}
 	ret	lr
-ENDPROC(v7_flush_kern_cache_louis)
+SYM_FUNC_END(v7_flush_kern_cache_louis)
 
 /*
  *	v7_flush_cache_all()
@@ -224,8 +227,9 @@ ENDPROC(v7_flush_kern_cache_louis)
  *
  *	- mm    - mm_struct describing address space
  */
-ENTRY(v7_flush_user_cache_all)
-	/*FALLTHROUGH*/
+SYM_TYPED_FUNC_START(v7_flush_user_cache_all)
+	ret	lr
+SYM_FUNC_END(v7_flush_user_cache_all)
 
 /*
  *	v7_flush_cache_range(start, end, flags)
@@ -239,10 +243,9 @@ ENTRY(v7_flush_user_cache_all)
  *	It is assumed that:
  *	- we have a VIPT cache.
  */
-ENTRY(v7_flush_user_cache_range)
+SYM_TYPED_FUNC_START(v7_flush_user_cache_range)
 	ret	lr
-ENDPROC(v7_flush_user_cache_all)
-ENDPROC(v7_flush_user_cache_range)
+SYM_FUNC_END(v7_flush_user_cache_range)
 
 /*
  *	v7_coherent_kern_range(start,end)
@@ -257,8 +260,11 @@ ENDPROC(v7_flush_user_cache_range)
  *	It is assumed that:
  *	- the Icache does not read data from the write buffer
  */
-ENTRY(v7_coherent_kern_range)
-	/* FALLTHROUGH */
+SYM_TYPED_FUNC_START(v7_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	v7_coherent_user_range
+#endif
+SYM_FUNC_END(v7_coherent_kern_range)
 
 /*
  *	v7_coherent_user_range(start,end)
@@ -273,7 +279,7 @@ ENTRY(v7_coherent_kern_range)
  *	It is assumed that:
  *	- the Icache does not read data from the write buffer
  */
-ENTRY(v7_coherent_user_range)
+SYM_TYPED_FUNC_START(v7_coherent_user_range)
  UNWIND(.fnstart		)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
@@ -319,8 +325,7 @@ ENTRY(v7_coherent_user_range)
 	mov	r0, #-EFAULT
 	ret	lr
  UNWIND(.fnend		)
-ENDPROC(v7_coherent_kern_range)
-ENDPROC(v7_coherent_user_range)
+SYM_FUNC_END(v7_coherent_user_range)
 
 /*
  *	v7_flush_kern_dcache_area(void *addr, size_t size)
@@ -331,7 +336,7 @@ ENDPROC(v7_coherent_user_range)
  *	- addr	- kernel address
  *	- size	- region size
  */
-ENTRY(v7_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(v7_flush_kern_dcache_area)
 	dcache_line_size r2, r3
 	add	r1, r0, r1
 	sub	r3, r2, #1
@@ -347,7 +352,7 @@ ENTRY(v7_flush_kern_dcache_area)
 	blo	1b
 	dsb	st
 	ret	lr
-ENDPROC(v7_flush_kern_dcache_area)
+SYM_FUNC_END(v7_flush_kern_dcache_area)
 
 /*
  *	v7_dma_inv_range(start,end)
@@ -411,7 +416,7 @@ ENDPROC(v7_dma_clean_range)
  *	- start   - virtual start address of region
  *	- end     - virtual end address of region
  */
-ENTRY(v7_dma_flush_range)
+SYM_TYPED_FUNC_START(v7_dma_flush_range)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
@@ -426,7 +431,7 @@ ENTRY(v7_dma_flush_range)
 	blo	1b
 	dsb	st
 	ret	lr
-ENDPROC(v7_dma_flush_range)
+SYM_FUNC_END(v7_dma_flush_range)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -434,12 +439,12 @@ ENDPROC(v7_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(v7_dma_map_area)
+SYM_TYPED_FUNC_START(v7_dma_map_area)
 	add	r1, r1, r0
 	teq	r2, #DMA_FROM_DEVICE
 	beq	v7_dma_inv_range
 	b	v7_dma_clean_range
-ENDPROC(v7_dma_map_area)
+SYM_FUNC_END(v7_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -447,34 +452,9 @@ ENDPROC(v7_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(v7_dma_unmap_area)
+SYM_TYPED_FUNC_START(v7_dma_unmap_area)
 	add	r1, r1, r0
 	teq	r2, #DMA_TO_DEVICE
 	bne	v7_dma_inv_range
 	ret	lr
-ENDPROC(v7_dma_unmap_area)
-
-	__INITDATA
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions v7
-
-	/* The Broadcom Brahma-B15 read-ahead cache requires some modifications
-	 * to the v7_cache_fns, we only override the ones we need
-	 */
-#ifndef CONFIG_CACHE_B15_RAC
-	globl_equ	b15_flush_kern_cache_all,	v7_flush_kern_cache_all
-#endif
-	globl_equ	b15_flush_icache_all,		v7_flush_icache_all
-	globl_equ	b15_flush_kern_cache_louis,	v7_flush_kern_cache_louis
-	globl_equ	b15_flush_user_cache_all,	v7_flush_user_cache_all
-	globl_equ	b15_flush_user_cache_range,	v7_flush_user_cache_range
-	globl_equ	b15_coherent_kern_range,	v7_coherent_kern_range
-	globl_equ	b15_coherent_user_range,	v7_coherent_user_range
-	globl_equ	b15_flush_kern_dcache_area,	v7_flush_kern_dcache_area
-
-	globl_equ	b15_dma_map_area,		v7_dma_map_area
-	globl_equ	b15_dma_unmap_area,		v7_dma_unmap_area
-	globl_equ	b15_dma_flush_range,		v7_dma_flush_range
-
-	define_cache_functions b15
+SYM_FUNC_END(v7_dma_unmap_area)
diff --git a/arch/arm/mm/cache-v7m.S b/arch/arm/mm/cache-v7m.S
index 1bc3a0a50753..7f9cfad2ea21 100644
--- a/arch/arm/mm/cache-v7m.S
+++ b/arch/arm/mm/cache-v7m.S
@@ -11,6 +11,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <asm/assembler.h>
 #include <asm/errno.h>
 #include <asm/unwind.h>
@@ -18,6 +19,8 @@
 
 #include "proc-macros.S"
 
+.arch armv7-m
+
 /* Generic V7M read/write macros for memory mapped cache operations */
 .macro v7m_cache_read, rt, reg
 	movw	\rt, #:lower16:BASEADDR_V7M_SCB + \reg
@@ -157,10 +160,10 @@ ENDPROC(v7m_invalidate_l1)
  *	Registers:
  *	r0 - set to 0
  */
-ENTRY(v7m_flush_icache_all)
+SYM_TYPED_FUNC_START(v7m_flush_icache_all)
 	invalidate_icache r0
 	ret	lr
-ENDPROC(v7m_flush_icache_all)
+SYM_FUNC_END(v7m_flush_icache_all)
 
 /*
  *	v7m_flush_dcache_all()
@@ -234,13 +237,13 @@ ENDPROC(v7m_flush_dcache_all)
  *  unification in a single instruction.
  *
  */
-ENTRY(v7m_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(v7m_flush_kern_cache_all)
 	stmfd	sp!, {r4-r7, r9-r11, lr}
 	bl	v7m_flush_dcache_all
 	invalidate_icache r0
 	ldmfd	sp!, {r4-r7, r9-r11, lr}
 	ret	lr
-ENDPROC(v7m_flush_kern_cache_all)
+SYM_FUNC_END(v7m_flush_kern_cache_all)
 
 /*
  *	v7m_flush_cache_all()
@@ -249,8 +252,9 @@ ENDPROC(v7m_flush_kern_cache_all)
  *
  *	- mm    - mm_struct describing address space
  */
-ENTRY(v7m_flush_user_cache_all)
-	/*FALLTHROUGH*/
+SYM_TYPED_FUNC_START(v7m_flush_user_cache_all)
+	ret	lr
+SYM_FUNC_END(v7m_flush_user_cache_all)
 
 /*
  *	v7m_flush_cache_range(start, end, flags)
@@ -264,10 +268,9 @@ ENTRY(v7m_flush_user_cache_all)
  *	It is assumed that:
  *	- we have a VIPT cache.
  */
-ENTRY(v7m_flush_user_cache_range)
+SYM_TYPED_FUNC_START(v7m_flush_user_cache_range)
 	ret	lr
-ENDPROC(v7m_flush_user_cache_all)
-ENDPROC(v7m_flush_user_cache_range)
+SYM_FUNC_END(v7m_flush_user_cache_range)
 
 /*
  *	v7m_coherent_kern_range(start,end)
@@ -282,8 +285,11 @@ ENDPROC(v7m_flush_user_cache_range)
  *	It is assumed that:
  *	- the Icache does not read data from the write buffer
  */
-ENTRY(v7m_coherent_kern_range)
-	/* FALLTHROUGH */
+SYM_TYPED_FUNC_START(v7m_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	v7m_coherent_user_range
+#endif
+SYM_FUNC_END(v7m_coherent_kern_range)
 
 /*
  *	v7m_coherent_user_range(start,end)
@@ -298,7 +304,7 @@ ENTRY(v7m_coherent_kern_range)
  *	It is assumed that:
  *	- the Icache does not read data from the write buffer
  */
-ENTRY(v7m_coherent_user_range)
+SYM_TYPED_FUNC_START(v7m_coherent_user_range)
  UNWIND(.fnstart		)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
@@ -326,8 +332,7 @@ ENTRY(v7m_coherent_user_range)
 	isb
 	ret	lr
  UNWIND(.fnend		)
-ENDPROC(v7m_coherent_kern_range)
-ENDPROC(v7m_coherent_user_range)
+SYM_FUNC_END(v7m_coherent_user_range)
 
 /*
  *	v7m_flush_kern_dcache_area(void *addr, size_t size)
@@ -338,7 +343,7 @@ ENDPROC(v7m_coherent_user_range)
  *	- addr	- kernel address
  *	- size	- region size
  */
-ENTRY(v7m_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(v7m_flush_kern_dcache_area)
 	dcache_line_size r2, r3
 	add	r1, r0, r1
 	sub	r3, r2, #1
@@ -350,7 +355,7 @@ ENTRY(v7m_flush_kern_dcache_area)
 	blo	1b
 	dsb	st
 	ret	lr
-ENDPROC(v7m_flush_kern_dcache_area)
+SYM_FUNC_END(v7m_flush_kern_dcache_area)
 
 /*
  *	v7m_dma_inv_range(start,end)
@@ -406,7 +411,7 @@ ENDPROC(v7m_dma_clean_range)
  *	- start   - virtual start address of region
  *	- end     - virtual end address of region
  */
-ENTRY(v7m_dma_flush_range)
+SYM_TYPED_FUNC_START(v7m_dma_flush_range)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
@@ -417,7 +422,7 @@ ENTRY(v7m_dma_flush_range)
 	blo	1b
 	dsb	st
 	ret	lr
-ENDPROC(v7m_dma_flush_range)
+SYM_FUNC_END(v7m_dma_flush_range)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -425,12 +430,12 @@ ENDPROC(v7m_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(v7m_dma_map_area)
+SYM_TYPED_FUNC_START(v7m_dma_map_area)
 	add	r1, r1, r0
 	teq	r2, #DMA_FROM_DEVICE
 	beq	v7m_dma_inv_range
 	b	v7m_dma_clean_range
-ENDPROC(v7m_dma_map_area)
+SYM_FUNC_END(v7m_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -438,17 +443,9 @@ ENDPROC(v7m_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(v7m_dma_unmap_area)
+SYM_TYPED_FUNC_START(v7m_dma_unmap_area)
 	add	r1, r1, r0
 	teq	r2, #DMA_TO_DEVICE
 	bne	v7m_dma_inv_range
 	ret	lr
-ENDPROC(v7m_dma_unmap_area)
-
-	.globl	v7m_flush_kern_cache_louis
-	.equ	v7m_flush_kern_cache_louis, v7m_flush_kern_cache_all
-
-	__INITDATA
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions v7m
+SYM_FUNC_END(v7m_dma_unmap_area)
diff --git a/arch/arm/mm/cache.c b/arch/arm/mm/cache.c
new file mode 100644
index 000000000000..e6fbc599c9ed
--- /dev/null
+++ b/arch/arm/mm/cache.c
@@ -0,0 +1,663 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * This file defines C prototypes for the low-level cache assembly functions
+ * and populates a vtable for each selected ARM CPU cache type.
+ */
+
+#include <linux/types.h>
+#include <asm/cacheflush.h>
+
+#ifdef CONFIG_CPU_CACHE_V4
+void v4_flush_icache_all(void);
+void v4_flush_kern_cache_all(void);
+void v4_flush_user_cache_all(void);
+void v4_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void v4_coherent_kern_range(unsigned long, unsigned long);
+int v4_coherent_user_range(unsigned long, unsigned long);
+void v4_flush_kern_dcache_area(void *, size_t);
+void v4_dma_map_area(const void *, size_t, int);
+void v4_dma_unmap_area(const void *, size_t, int);
+void v4_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns v4_cache_fns __initconst = {
+	.flush_icache_all = v4_flush_icache_all,
+	.flush_kern_all = v4_flush_kern_cache_all,
+	.flush_kern_louis = v4_flush_kern_cache_all,
+	.flush_user_all = v4_flush_user_cache_all,
+	.flush_user_range = v4_flush_user_cache_range,
+	.coherent_kern_range = v4_coherent_kern_range,
+	.coherent_user_range = v4_coherent_user_range,
+	.flush_kern_dcache_area = v4_flush_kern_dcache_area,
+	.dma_map_area = v4_dma_map_area,
+	.dma_unmap_area = v4_dma_unmap_area,
+	.dma_flush_range = v4_dma_flush_range,
+};
+#endif
+
+/* V4 write-back cache "V4WB" */
+#ifdef CONFIG_CPU_CACHE_V4WB
+void v4wb_flush_icache_all(void);
+void v4wb_flush_kern_cache_all(void);
+void v4wb_flush_user_cache_all(void);
+void v4wb_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void v4wb_coherent_kern_range(unsigned long, unsigned long);
+int v4wb_coherent_user_range(unsigned long, unsigned long);
+void v4wb_flush_kern_dcache_area(void *, size_t);
+void v4wb_dma_map_area(const void *, size_t, int);
+void v4wb_dma_unmap_area(const void *, size_t, int);
+void v4wb_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns v4wb_cache_fns __initconst = {
+	.flush_icache_all = v4wb_flush_icache_all,
+	.flush_kern_all = v4wb_flush_kern_cache_all,
+	.flush_kern_louis = v4wb_flush_kern_cache_all,
+	.flush_user_all = v4wb_flush_user_cache_all,
+	.flush_user_range = v4wb_flush_user_cache_range,
+	.coherent_kern_range = v4wb_coherent_kern_range,
+	.coherent_user_range = v4wb_coherent_user_range,
+	.flush_kern_dcache_area = v4wb_flush_kern_dcache_area,
+	.dma_map_area = v4wb_dma_map_area,
+	.dma_unmap_area = v4wb_dma_unmap_area,
+	.dma_flush_range = v4wb_dma_flush_range,
+};
+#endif
+
+/* V4 write-through cache "V4WT" */
+#ifdef CONFIG_CPU_CACHE_V4WT
+void v4wt_flush_icache_all(void);
+void v4wt_flush_kern_cache_all(void);
+void v4wt_flush_user_cache_all(void);
+void v4wt_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void v4wt_coherent_kern_range(unsigned long, unsigned long);
+int v4wt_coherent_user_range(unsigned long, unsigned long);
+void v4wt_flush_kern_dcache_area(void *, size_t);
+void v4wt_dma_map_area(const void *, size_t, int);
+void v4wt_dma_unmap_area(const void *, size_t, int);
+void v4wt_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns v4wt_cache_fns __initconst = {
+	.flush_icache_all = v4wt_flush_icache_all,
+	.flush_kern_all = v4wt_flush_kern_cache_all,
+	.flush_kern_louis = v4wt_flush_kern_cache_all,
+	.flush_user_all = v4wt_flush_user_cache_all,
+	.flush_user_range = v4wt_flush_user_cache_range,
+	.coherent_kern_range = v4wt_coherent_kern_range,
+	.coherent_user_range = v4wt_coherent_user_range,
+	.flush_kern_dcache_area = v4wt_flush_kern_dcache_area,
+	.dma_map_area = v4wt_dma_map_area,
+	.dma_unmap_area = v4wt_dma_unmap_area,
+	.dma_flush_range = v4wt_dma_flush_range,
+};
+#endif
+
+/* Faraday FA526 cache */
+#ifdef CONFIG_CPU_CACHE_FA
+void fa_flush_icache_all(void);
+void fa_flush_kern_cache_all(void);
+void fa_flush_user_cache_all(void);
+void fa_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void fa_coherent_kern_range(unsigned long, unsigned long);
+int fa_coherent_user_range(unsigned long, unsigned long);
+void fa_flush_kern_dcache_area(void *, size_t);
+void fa_dma_map_area(const void *, size_t, int);
+void fa_dma_unmap_area(const void *, size_t, int);
+void fa_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns fa_cache_fns __initconst = {
+	.flush_icache_all = fa_flush_icache_all,
+	.flush_kern_all = fa_flush_kern_cache_all,
+	.flush_kern_louis = fa_flush_kern_cache_all,
+	.flush_user_all = fa_flush_user_cache_all,
+	.flush_user_range = fa_flush_user_cache_range,
+	.coherent_kern_range = fa_coherent_kern_range,
+	.coherent_user_range = fa_coherent_user_range,
+	.flush_kern_dcache_area = fa_flush_kern_dcache_area,
+	.dma_map_area = fa_dma_map_area,
+	.dma_unmap_area = fa_dma_unmap_area,
+	.dma_flush_range = fa_dma_flush_range,
+};
+#endif
+
+#ifdef CONFIG_CPU_CACHE_V6
+void v6_flush_icache_all(void);
+void v6_flush_kern_cache_all(void);
+void v6_flush_user_cache_all(void);
+void v6_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void v6_coherent_kern_range(unsigned long, unsigned long);
+int v6_coherent_user_range(unsigned long, unsigned long);
+void v6_flush_kern_dcache_area(void *, size_t);
+void v6_dma_map_area(const void *, size_t, int);
+void v6_dma_unmap_area(const void *, size_t, int);
+void v6_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns v6_cache_fns __initconst = {
+	.flush_icache_all = v6_flush_icache_all,
+	.flush_kern_all = v6_flush_kern_cache_all,
+	.flush_kern_louis = v6_flush_kern_cache_all,
+	.flush_user_all = v6_flush_user_cache_all,
+	.flush_user_range = v6_flush_user_cache_range,
+	.coherent_kern_range = v6_coherent_kern_range,
+	.coherent_user_range = v6_coherent_user_range,
+	.flush_kern_dcache_area = v6_flush_kern_dcache_area,
+	.dma_map_area = v6_dma_map_area,
+	.dma_unmap_area = v6_dma_unmap_area,
+	.dma_flush_range = v6_dma_flush_range,
+};
+#endif
+
+#ifdef CONFIG_CPU_CACHE_V7
+void v7_flush_icache_all(void);
+void v7_flush_kern_cache_all(void);
+void v7_flush_kern_cache_louis(void);
+void v7_flush_user_cache_all(void);
+void v7_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void v7_coherent_kern_range(unsigned long, unsigned long);
+int v7_coherent_user_range(unsigned long, unsigned long);
+void v7_flush_kern_dcache_area(void *, size_t);
+void v7_dma_map_area(const void *, size_t, int);
+void v7_dma_unmap_area(const void *, size_t, int);
+void v7_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns v7_cache_fns __initconst = {
+	.flush_icache_all = v7_flush_icache_all,
+	.flush_kern_all = v7_flush_kern_cache_all,
+	.flush_kern_louis = v7_flush_kern_cache_louis,
+	.flush_user_all = v7_flush_user_cache_all,
+	.flush_user_range = v7_flush_user_cache_range,
+	.coherent_kern_range = v7_coherent_kern_range,
+	.coherent_user_range = v7_coherent_user_range,
+	.flush_kern_dcache_area = v7_flush_kern_dcache_area,
+	.dma_map_area = v7_dma_map_area,
+	.dma_unmap_area = v7_dma_unmap_area,
+	.dma_flush_range = v7_dma_flush_range,
+};
+
+/* Special quirky cache flush function for Broadcom B15 v7 caches */
+void b15_flush_kern_cache_all(void);
+
+struct cpu_cache_fns b15_cache_fns __initconst = {
+	.flush_icache_all = v7_flush_icache_all,
+#ifdef CONFIG_CACHE_B15_RAC
+	.flush_kern_all = b15_flush_kern_cache_all,
+#else
+	.flush_kern_all = v7_flush_kern_cache_all,
+#endif
+	.flush_kern_louis = v7_flush_kern_cache_louis,
+	.flush_user_all = v7_flush_user_cache_all,
+	.flush_user_range = v7_flush_user_cache_range,
+	.coherent_kern_range = v7_coherent_kern_range,
+	.coherent_user_range = v7_coherent_user_range,
+	.flush_kern_dcache_area = v7_flush_kern_dcache_area,
+	.dma_map_area = v7_dma_map_area,
+	.dma_unmap_area = v7_dma_unmap_area,
+	.dma_flush_range = v7_dma_flush_range,
+};
+#endif
+
+/* The NOP cache is just a set of dummy stubs that by definition does nothing */
+#ifdef CONFIG_CPU_CACHE_NOP
+void nop_flush_icache_all(void);
+void nop_flush_kern_cache_all(void);
+void nop_flush_user_cache_all(void);
+void nop_flush_user_cache_range(unsigned long start, unsigned long end, unsigned int flags);
+void nop_coherent_kern_range(unsigned long start, unsigned long end);
+int nop_coherent_user_range(unsigned long, unsigned long);
+void nop_flush_kern_dcache_area(void *kaddr, size_t size);
+void nop_dma_map_area(const void *start, size_t size, int flags);
+void nop_dma_unmap_area(const void *start, size_t size, int flags);
+void nop_dma_flush_range(const void *start, const void *end);
+
+struct cpu_cache_fns nop_cache_fns __initconst = {
+	.flush_icache_all = nop_flush_icache_all,
+	.flush_kern_all = nop_flush_kern_cache_all,
+	.flush_kern_louis = nop_flush_kern_cache_all,
+	.flush_user_all = nop_flush_user_cache_all,
+	.flush_user_range = nop_flush_user_cache_range,
+	.coherent_kern_range = nop_coherent_kern_range,
+	.coherent_user_range = nop_coherent_user_range,
+	.flush_kern_dcache_area = nop_flush_kern_dcache_area,
+	.dma_map_area = nop_dma_map_area,
+	.dma_unmap_area = nop_dma_unmap_area,
+	.dma_flush_range = nop_dma_flush_range,
+};
+#endif
+
+#ifdef CONFIG_CPU_CACHE_V7M
+void v7m_flush_icache_all(void);
+void v7m_flush_kern_cache_all(void);
+void v7m_flush_user_cache_all(void);
+void v7m_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void v7m_coherent_kern_range(unsigned long, unsigned long);
+int v7m_coherent_user_range(unsigned long, unsigned long);
+void v7m_flush_kern_dcache_area(void *, size_t);
+void v7m_dma_map_area(const void *, size_t, int);
+void v7m_dma_unmap_area(const void *, size_t, int);
+void v7m_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns v7m_cache_fns __initconst = {
+	.flush_icache_all = v7m_flush_icache_all,
+	.flush_kern_all = v7m_flush_kern_cache_all,
+	.flush_kern_louis = v7m_flush_kern_cache_all,
+	.flush_user_all = v7m_flush_user_cache_all,
+	.flush_user_range = v7m_flush_user_cache_range,
+	.coherent_kern_range = v7m_coherent_kern_range,
+	.coherent_user_range = v7m_coherent_user_range,
+	.flush_kern_dcache_area = v7m_flush_kern_dcache_area,
+	.dma_map_area = v7m_dma_map_area,
+	.dma_unmap_area = v7m_dma_unmap_area,
+	.dma_flush_range = v7m_dma_flush_range,
+};
+#endif
+
+#ifdef CONFIG_CPU_ARM1020
+void arm1020_flush_icache_all(void);
+void arm1020_flush_kern_cache_all(void);
+void arm1020_flush_user_cache_all(void);
+void arm1020_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void arm1020_coherent_kern_range(unsigned long, unsigned long);
+int arm1020_coherent_user_range(unsigned long, unsigned long);
+void arm1020_flush_kern_dcache_area(void *, size_t);
+void arm1020_dma_map_area(const void *, size_t, int);
+void arm1020_dma_unmap_area(const void *, size_t, int);
+void arm1020_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns arm1020_cache_fns __initconst = {
+	.flush_icache_all = arm1020_flush_icache_all,
+	.flush_kern_all = arm1020_flush_kern_cache_all,
+	.flush_kern_louis = arm1020_flush_kern_cache_all,
+	.flush_user_all = arm1020_flush_user_cache_all,
+	.flush_user_range = arm1020_flush_user_cache_range,
+	.coherent_kern_range = arm1020_coherent_kern_range,
+	.coherent_user_range = arm1020_coherent_user_range,
+	.flush_kern_dcache_area = arm1020_flush_kern_dcache_area,
+	.dma_map_area = arm1020_dma_map_area,
+	.dma_unmap_area = arm1020_dma_unmap_area,
+	.dma_flush_range = arm1020_dma_flush_range,
+};
+#endif
+
+#ifdef CONFIG_CPU_ARM1020E
+void arm1020e_flush_icache_all(void);
+void arm1020e_flush_kern_cache_all(void);
+void arm1020e_flush_user_cache_all(void);
+void arm1020e_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void arm1020e_coherent_kern_range(unsigned long, unsigned long);
+int arm1020e_coherent_user_range(unsigned long, unsigned long);
+void arm1020e_flush_kern_dcache_area(void *, size_t);
+void arm1020e_dma_map_area(const void *, size_t, int);
+void arm1020e_dma_unmap_area(const void *, size_t, int);
+void arm1020e_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns arm1020e_cache_fns __initconst = {
+	.flush_icache_all = arm1020e_flush_icache_all,
+	.flush_kern_all = arm1020e_flush_kern_cache_all,
+	.flush_kern_louis = arm1020e_flush_kern_cache_all,
+	.flush_user_all = arm1020e_flush_user_cache_all,
+	.flush_user_range = arm1020e_flush_user_cache_range,
+	.coherent_kern_range = arm1020e_coherent_kern_range,
+	.coherent_user_range = arm1020e_coherent_user_range,
+	.flush_kern_dcache_area = arm1020e_flush_kern_dcache_area,
+	.dma_map_area = arm1020e_dma_map_area,
+	.dma_unmap_area = arm1020e_dma_unmap_area,
+	.dma_flush_range = arm1020e_dma_flush_range,
+};
+#endif
+
+#ifdef CONFIG_CPU_ARM1022
+void arm1022_flush_icache_all(void);
+void arm1022_flush_kern_cache_all(void);
+void arm1022_flush_user_cache_all(void);
+void arm1022_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void arm1022_coherent_kern_range(unsigned long, unsigned long);
+int arm1022_coherent_user_range(unsigned long, unsigned long);
+void arm1022_flush_kern_dcache_area(void *, size_t);
+void arm1022_dma_map_area(const void *, size_t, int);
+void arm1022_dma_unmap_area(const void *, size_t, int);
+void arm1022_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns arm1022_cache_fns __initconst = {
+	.flush_icache_all = arm1022_flush_icache_all,
+	.flush_kern_all = arm1022_flush_kern_cache_all,
+	.flush_kern_louis = arm1022_flush_kern_cache_all,
+	.flush_user_all = arm1022_flush_user_cache_all,
+	.flush_user_range = arm1022_flush_user_cache_range,
+	.coherent_kern_range = arm1022_coherent_kern_range,
+	.coherent_user_range = arm1022_coherent_user_range,
+	.flush_kern_dcache_area = arm1022_flush_kern_dcache_area,
+	.dma_map_area = arm1022_dma_map_area,
+	.dma_unmap_area = arm1022_dma_unmap_area,
+	.dma_flush_range = arm1022_dma_flush_range,
+};
+#endif
+
+#ifdef CONFIG_CPU_ARM1026
+void arm1026_flush_icache_all(void);
+void arm1026_flush_kern_cache_all(void);
+void arm1026_flush_user_cache_all(void);
+void arm1026_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void arm1026_coherent_kern_range(unsigned long, unsigned long);
+int arm1026_coherent_user_range(unsigned long, unsigned long);
+void arm1026_flush_kern_dcache_area(void *, size_t);
+void arm1026_dma_map_area(const void *, size_t, int);
+void arm1026_dma_unmap_area(const void *, size_t, int);
+void arm1026_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns arm1026_cache_fns __initconst = {
+	.flush_icache_all = arm1026_flush_icache_all,
+	.flush_kern_all = arm1026_flush_kern_cache_all,
+	.flush_kern_louis = arm1026_flush_kern_cache_all,
+	.flush_user_all = arm1026_flush_user_cache_all,
+	.flush_user_range = arm1026_flush_user_cache_range,
+	.coherent_kern_range = arm1026_coherent_kern_range,
+	.coherent_user_range = arm1026_coherent_user_range,
+	.flush_kern_dcache_area = arm1026_flush_kern_dcache_area,
+	.dma_map_area = arm1026_dma_map_area,
+	.dma_unmap_area = arm1026_dma_unmap_area,
+	.dma_flush_range = arm1026_dma_flush_range,
+};
+#endif
+
+#if defined(CONFIG_CPU_ARM920T) && !defined(CONFIG_CPU_DCACHE_WRITETHROUGH)
+void arm920_flush_icache_all(void);
+void arm920_flush_kern_cache_all(void);
+void arm920_flush_user_cache_all(void);
+void arm920_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void arm920_coherent_kern_range(unsigned long, unsigned long);
+int arm920_coherent_user_range(unsigned long, unsigned long);
+void arm920_flush_kern_dcache_area(void *, size_t);
+void arm920_dma_map_area(const void *, size_t, int);
+void arm920_dma_unmap_area(const void *, size_t, int);
+void arm920_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns arm920_cache_fns __initconst = {
+	.flush_icache_all = arm920_flush_icache_all,
+	.flush_kern_all = arm920_flush_kern_cache_all,
+	.flush_kern_louis = arm920_flush_kern_cache_all,
+	.flush_user_all = arm920_flush_user_cache_all,
+	.flush_user_range = arm920_flush_user_cache_range,
+	.coherent_kern_range = arm920_coherent_kern_range,
+	.coherent_user_range = arm920_coherent_user_range,
+	.flush_kern_dcache_area = arm920_flush_kern_dcache_area,
+	.dma_map_area = arm920_dma_map_area,
+	.dma_unmap_area = arm920_dma_unmap_area,
+	.dma_flush_range = arm920_dma_flush_range,
+};
+#endif
+
+#if defined(CONFIG_CPU_ARM922T) && !defined(CONFIG_CPU_DCACHE_WRITETHROUGH)
+void arm922_flush_icache_all(void);
+void arm922_flush_kern_cache_all(void);
+void arm922_flush_user_cache_all(void);
+void arm922_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void arm922_coherent_kern_range(unsigned long, unsigned long);
+int arm922_coherent_user_range(unsigned long, unsigned long);
+void arm922_flush_kern_dcache_area(void *, size_t);
+void arm922_dma_map_area(const void *, size_t, int);
+void arm922_dma_unmap_area(const void *, size_t, int);
+void arm922_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns arm922_cache_fns __initconst = {
+	.flush_icache_all = arm922_flush_icache_all,
+	.flush_kern_all = arm922_flush_kern_cache_all,
+	.flush_kern_louis = arm922_flush_kern_cache_all,
+	.flush_user_all = arm922_flush_user_cache_all,
+	.flush_user_range = arm922_flush_user_cache_range,
+	.coherent_kern_range = arm922_coherent_kern_range,
+	.coherent_user_range = arm922_coherent_user_range,
+	.flush_kern_dcache_area = arm922_flush_kern_dcache_area,
+	.dma_map_area = arm922_dma_map_area,
+	.dma_unmap_area = arm922_dma_unmap_area,
+	.dma_flush_range = arm922_dma_flush_range,
+};
+#endif
+
+#ifdef CONFIG_CPU_ARM925T
+void arm925_flush_icache_all(void);
+void arm925_flush_kern_cache_all(void);
+void arm925_flush_user_cache_all(void);
+void arm925_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void arm925_coherent_kern_range(unsigned long, unsigned long);
+int arm925_coherent_user_range(unsigned long, unsigned long);
+void arm925_flush_kern_dcache_area(void *, size_t);
+void arm925_dma_map_area(const void *, size_t, int);
+void arm925_dma_unmap_area(const void *, size_t, int);
+void arm925_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns arm925_cache_fns __initconst = {
+	.flush_icache_all = arm925_flush_icache_all,
+	.flush_kern_all = arm925_flush_kern_cache_all,
+	.flush_kern_louis = arm925_flush_kern_cache_all,
+	.flush_user_all = arm925_flush_user_cache_all,
+	.flush_user_range = arm925_flush_user_cache_range,
+	.coherent_kern_range = arm925_coherent_kern_range,
+	.coherent_user_range = arm925_coherent_user_range,
+	.flush_kern_dcache_area = arm925_flush_kern_dcache_area,
+	.dma_map_area = arm925_dma_map_area,
+	.dma_unmap_area = arm925_dma_unmap_area,
+	.dma_flush_range = arm925_dma_flush_range,
+};
+#endif
+
+#ifdef CONFIG_CPU_ARM926T
+void arm926_flush_icache_all(void);
+void arm926_flush_kern_cache_all(void);
+void arm926_flush_user_cache_all(void);
+void arm926_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void arm926_coherent_kern_range(unsigned long, unsigned long);
+int arm926_coherent_user_range(unsigned long, unsigned long);
+void arm926_flush_kern_dcache_area(void *, size_t);
+void arm926_dma_map_area(const void *, size_t, int);
+void arm926_dma_unmap_area(const void *, size_t, int);
+void arm926_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns arm926_cache_fns __initconst = {
+	.flush_icache_all = arm926_flush_icache_all,
+	.flush_kern_all = arm926_flush_kern_cache_all,
+	.flush_kern_louis = arm926_flush_kern_cache_all,
+	.flush_user_all = arm926_flush_user_cache_all,
+	.flush_user_range = arm926_flush_user_cache_range,
+	.coherent_kern_range = arm926_coherent_kern_range,
+	.coherent_user_range = arm926_coherent_user_range,
+	.flush_kern_dcache_area = arm926_flush_kern_dcache_area,
+	.dma_map_area = arm926_dma_map_area,
+	.dma_unmap_area = arm926_dma_unmap_area,
+	.dma_flush_range = arm926_dma_flush_range,
+};
+#endif
+
+#ifdef CONFIG_CPU_ARM940T
+void arm940_flush_icache_all(void);
+void arm940_flush_kern_cache_all(void);
+void arm940_flush_user_cache_all(void);
+void arm940_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void arm940_coherent_kern_range(unsigned long, unsigned long);
+int arm940_coherent_user_range(unsigned long, unsigned long);
+void arm940_flush_kern_dcache_area(void *, size_t);
+void arm940_dma_map_area(const void *, size_t, int);
+void arm940_dma_unmap_area(const void *, size_t, int);
+void arm940_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns arm940_cache_fns __initconst = {
+	.flush_icache_all = arm940_flush_icache_all,
+	.flush_kern_all = arm940_flush_kern_cache_all,
+	.flush_kern_louis = arm940_flush_kern_cache_all,
+	.flush_user_all = arm940_flush_user_cache_all,
+	.flush_user_range = arm940_flush_user_cache_range,
+	.coherent_kern_range = arm940_coherent_kern_range,
+	.coherent_user_range = arm940_coherent_user_range,
+	.flush_kern_dcache_area = arm940_flush_kern_dcache_area,
+	.dma_map_area = arm940_dma_map_area,
+	.dma_unmap_area = arm940_dma_unmap_area,
+	.dma_flush_range = arm940_dma_flush_range,
+};
+#endif
+
+#ifdef CONFIG_CPU_ARM946E
+void arm946_flush_icache_all(void);
+void arm946_flush_kern_cache_all(void);
+void arm946_flush_user_cache_all(void);
+void arm946_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void arm946_coherent_kern_range(unsigned long, unsigned long);
+int arm946_coherent_user_range(unsigned long, unsigned long);
+void arm946_flush_kern_dcache_area(void *, size_t);
+void arm946_dma_map_area(const void *, size_t, int);
+void arm946_dma_unmap_area(const void *, size_t, int);
+void arm946_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns arm946_cache_fns __initconst = {
+	.flush_icache_all = arm946_flush_icache_all,
+	.flush_kern_all = arm946_flush_kern_cache_all,
+	.flush_kern_louis = arm946_flush_kern_cache_all,
+	.flush_user_all = arm946_flush_user_cache_all,
+	.flush_user_range = arm946_flush_user_cache_range,
+	.coherent_kern_range = arm946_coherent_kern_range,
+	.coherent_user_range = arm946_coherent_user_range,
+	.flush_kern_dcache_area = arm946_flush_kern_dcache_area,
+	.dma_map_area = arm946_dma_map_area,
+	.dma_unmap_area = arm946_dma_unmap_area,
+	.dma_flush_range = arm946_dma_flush_range,
+};
+#endif
+
+#ifdef CONFIG_CPU_XSCALE
+void xscale_flush_icache_all(void);
+void xscale_flush_kern_cache_all(void);
+void xscale_flush_user_cache_all(void);
+void xscale_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void xscale_coherent_kern_range(unsigned long, unsigned long);
+int xscale_coherent_user_range(unsigned long, unsigned long);
+void xscale_flush_kern_dcache_area(void *, size_t);
+void xscale_dma_map_area(const void *, size_t, int);
+void xscale_dma_unmap_area(const void *, size_t, int);
+void xscale_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns xscale_cache_fns __initconst = {
+	.flush_icache_all = xscale_flush_icache_all,
+	.flush_kern_all = xscale_flush_kern_cache_all,
+	.flush_kern_louis = xscale_flush_kern_cache_all,
+	.flush_user_all = xscale_flush_user_cache_all,
+	.flush_user_range = xscale_flush_user_cache_range,
+	.coherent_kern_range = xscale_coherent_kern_range,
+	.coherent_user_range = xscale_coherent_user_range,
+	.flush_kern_dcache_area = xscale_flush_kern_dcache_area,
+	.dma_map_area = xscale_dma_map_area,
+	.dma_unmap_area = xscale_dma_unmap_area,
+	.dma_flush_range = xscale_dma_flush_range,
+};
+
+/* The 80200 A0 and A1 need a special quirk for dma_map_area() */
+void xscale_80200_A0_A1_dma_map_area(const void *, size_t, int);
+
+struct cpu_cache_fns xscale_80200_A0_A1_cache_fns __initconst = {
+	.flush_icache_all = xscale_flush_icache_all,
+	.flush_kern_all = xscale_flush_kern_cache_all,
+	.flush_kern_louis = xscale_flush_kern_cache_all,
+	.flush_user_all = xscale_flush_user_cache_all,
+	.flush_user_range = xscale_flush_user_cache_range,
+	.coherent_kern_range = xscale_coherent_kern_range,
+	.coherent_user_range = xscale_coherent_user_range,
+	.flush_kern_dcache_area = xscale_flush_kern_dcache_area,
+	.dma_map_area = xscale_80200_A0_A1_dma_map_area,
+	.dma_unmap_area = xscale_dma_unmap_area,
+	.dma_flush_range = xscale_dma_flush_range,
+};
+#endif
+
+#ifdef CONFIG_CPU_XSC3
+void xsc3_flush_icache_all(void);
+void xsc3_flush_kern_cache_all(void);
+void xsc3_flush_user_cache_all(void);
+void xsc3_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void xsc3_coherent_kern_range(unsigned long, unsigned long);
+int xsc3_coherent_user_range(unsigned long, unsigned long);
+void xsc3_flush_kern_dcache_area(void *, size_t);
+void xsc3_dma_map_area(const void *, size_t, int);
+void xsc3_dma_unmap_area(const void *, size_t, int);
+void xsc3_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns xsc3_cache_fns __initconst = {
+	.flush_icache_all = xsc3_flush_icache_all,
+	.flush_kern_all = xsc3_flush_kern_cache_all,
+	.flush_kern_louis = xsc3_flush_kern_cache_all,
+	.flush_user_all = xsc3_flush_user_cache_all,
+	.flush_user_range = xsc3_flush_user_cache_range,
+	.coherent_kern_range = xsc3_coherent_kern_range,
+	.coherent_user_range = xsc3_coherent_user_range,
+	.flush_kern_dcache_area = xsc3_flush_kern_dcache_area,
+	.dma_map_area = xsc3_dma_map_area,
+	.dma_unmap_area = xsc3_dma_unmap_area,
+	.dma_flush_range = xsc3_dma_flush_range,
+};
+#endif
+
+#ifdef CONFIG_CPU_MOHAWK
+void mohawk_flush_icache_all(void);
+void mohawk_flush_kern_cache_all(void);
+void mohawk_flush_user_cache_all(void);
+void mohawk_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void mohawk_coherent_kern_range(unsigned long, unsigned long);
+int mohawk_coherent_user_range(unsigned long, unsigned long);
+void mohawk_flush_kern_dcache_area(void *, size_t);
+void mohawk_dma_map_area(const void *, size_t, int);
+void mohawk_dma_unmap_area(const void *, size_t, int);
+void mohawk_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns mohawk_cache_fns __initconst = {
+	.flush_icache_all = mohawk_flush_icache_all,
+	.flush_kern_all = mohawk_flush_kern_cache_all,
+	.flush_kern_louis = mohawk_flush_kern_cache_all,
+	.flush_user_all = mohawk_flush_user_cache_all,
+	.flush_user_range = mohawk_flush_user_cache_range,
+	.coherent_kern_range = mohawk_coherent_kern_range,
+	.coherent_user_range = mohawk_coherent_user_range,
+	.flush_kern_dcache_area = mohawk_flush_kern_dcache_area,
+	.dma_map_area = mohawk_dma_map_area,
+	.dma_unmap_area = mohawk_dma_unmap_area,
+	.dma_flush_range = mohawk_dma_flush_range,
+};
+#endif
+
+#ifdef CONFIG_CPU_FEROCEON
+void feroceon_flush_icache_all(void);
+void feroceon_flush_kern_cache_all(void);
+void feroceon_flush_user_cache_all(void);
+void feroceon_flush_user_cache_range(unsigned long, unsigned long, unsigned int);
+void feroceon_coherent_kern_range(unsigned long, unsigned long);
+int feroceon_coherent_user_range(unsigned long, unsigned long);
+void feroceon_flush_kern_dcache_area(void *, size_t);
+void feroceon_dma_map_area(const void *, size_t, int);
+void feroceon_dma_unmap_area(const void *, size_t, int);
+void feroceon_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns feroceon_cache_fns __initconst = {
+	.flush_icache_all = feroceon_flush_icache_all,
+	.flush_kern_all = feroceon_flush_kern_cache_all,
+	.flush_kern_louis = feroceon_flush_kern_cache_all,
+	.flush_user_all = feroceon_flush_user_cache_all,
+	.flush_user_range = feroceon_flush_user_cache_range,
+	.coherent_kern_range = feroceon_coherent_kern_range,
+	.coherent_user_range = feroceon_coherent_user_range,
+	.flush_kern_dcache_area = feroceon_flush_kern_dcache_area,
+	.dma_map_area = feroceon_dma_map_area,
+	.dma_unmap_area = feroceon_dma_unmap_area,
+	.dma_flush_range = feroceon_dma_flush_range,
+};
+
+void feroceon_range_flush_kern_dcache_area(void *, size_t);
+void feroceon_range_dma_map_area(const void *, size_t, int);
+void feroceon_range_dma_flush_range(const void *, const void *);
+
+struct cpu_cache_fns feroceon_range_cache_fns __initconst = {
+	.flush_icache_all = feroceon_flush_icache_all,
+	.flush_kern_all = feroceon_flush_kern_cache_all,
+	.flush_kern_louis = feroceon_flush_kern_cache_all,
+	.flush_user_all = feroceon_flush_user_cache_all,
+	.flush_user_range = feroceon_flush_user_cache_range,
+	.coherent_kern_range = feroceon_coherent_kern_range,
+	.coherent_user_range = feroceon_coherent_user_range,
+	.flush_kern_dcache_area = feroceon_range_flush_kern_dcache_area,
+	.dma_map_area = feroceon_range_dma_map_area,
+	.dma_unmap_area = feroceon_dma_unmap_area,
+	.dma_flush_range = feroceon_range_dma_flush_range,
+};
+#endif
diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c
index 064b19e63571..5fc8ef1e665f 100644
--- a/arch/arm/mm/copypage-feroceon.c
+++ b/arch/arm/mm/copypage-feroceon.c
@@ -15,6 +15,7 @@ static void feroceon_copy_user_page(void *kto, const void *kfrom)
 	int tmp;
 
 	asm volatile ("\
+.arch	armv5te					\n\
 1:	ldmia	%1!, {r2 - r7, ip, lr}		\n\
 	pld	[%1, #0]			\n\
 	pld	[%1, #32]			\n\
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index f1da3b439b96..ed843bb22020 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -64,10 +64,11 @@ static void mc_copy_user_page(void *from, void *to)
 void v4_mc_copy_user_highpage(struct page *to, struct page *from,
 	unsigned long vaddr, struct vm_area_struct *vma)
 {
+	struct folio *src = page_folio(from);
 	void *kto = kmap_atomic(to);
 
-	if (!test_and_set_bit(PG_dcache_clean, &from->flags))
-		__flush_dcache_page(page_mapping_file(from), from);
+	if (!test_and_set_bit(PG_dcache_clean, &src->flags.f))
+		__flush_dcache_folio(folio_flush_mapping(src), src);
 
 	raw_spin_lock(&minicache_lock);
 
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index d8a115de5507..0710dba5c0bf 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -69,11 +69,12 @@ static void discard_old_kernel_data(void *kto)
 static void v6_copy_user_highpage_aliasing(struct page *to,
 	struct page *from, unsigned long vaddr, struct vm_area_struct *vma)
 {
+	struct folio *src = page_folio(from);
 	unsigned int offset = CACHE_COLOUR(vaddr);
 	unsigned long kfrom, kto;
 
-	if (!test_and_set_bit(PG_dcache_clean, &from->flags))
-		__flush_dcache_page(page_mapping_file(from), from);
+	if (!test_and_set_bit(PG_dcache_clean, &src->flags.f))
+		__flush_dcache_folio(folio_flush_mapping(src), src);
 
 	/* FIXME: not highmem safe */
 	discard_old_kernel_data(page_address(to));
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index bcb485620a05..e16af68d709f 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -84,10 +84,11 @@ static void mc_copy_user_page(void *from, void *to)
 void xscale_mc_copy_user_highpage(struct page *to, struct page *from,
 	unsigned long vaddr, struct vm_area_struct *vma)
 {
+	struct folio *src = page_folio(from);
 	void *kto = kmap_atomic(to);
 
-	if (!test_and_set_bit(PG_dcache_clean, &from->flags))
-		__flush_dcache_page(page_mapping_file(from), from);
+	if (!test_and_set_bit(PG_dcache_clean, &src->flags.f))
+		__flush_dcache_folio(folio_flush_mapping(src), src);
 
 	raw_spin_lock(&minicache_lock);
 
diff --git a/arch/arm/mm/dma-mapping-nommu.c b/arch/arm/mm/dma-mapping-nommu.c
index cfd9c933d2f0..fecac107fd0d 100644
--- a/arch/arm/mm/dma-mapping-nommu.c
+++ b/arch/arm/mm/dma-mapping-nommu.c
@@ -33,14 +33,13 @@ void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
 	}
 }
 
-void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-			const struct iommu_ops *iommu, bool coherent)
+void arch_setup_dma_ops(struct device *dev, bool coherent)
 {
 	if (IS_ENABLED(CONFIG_CPU_V7M)) {
 		/*
 		 * Cache support for v7m is optional, so can be treated as
 		 * coherent if no cache has been detected. Note that it is not
-		 * enough to check if MPU is in use or not since in absense of
+		 * enough to check if MPU is in use or not since in absence of
 		 * MPU system memory map is used.
 		 */
 		dev->dma_coherent = cacheid ? coherent : true;
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 089c9c644cce..08641a936394 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -25,7 +25,7 @@
 #include <linux/sizes.h>
 #include <linux/cma.h>
 
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/highmem.h>
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
@@ -258,12 +258,14 @@ static struct dma_contig_early_reserve dma_mmu_remap[MAX_CMA_AREAS] __initdata;
 
 static int dma_mmu_remap_num __initdata;
 
+#ifdef CONFIG_DMA_CMA
 void __init dma_contiguous_early_fixup(phys_addr_t base, unsigned long size)
 {
 	dma_mmu_remap[dma_mmu_remap_num].base = base;
 	dma_mmu_remap[dma_mmu_remap_num].size = size;
 	dma_mmu_remap_num++;
 }
+#endif
 
 void __init dma_contiguous_remap(void)
 {
@@ -307,7 +309,7 @@ void __init dma_contiguous_remap(void)
 
 static int __dma_update_pte(pte_t *pte, unsigned long addr, void *data)
 {
-	struct page *page = virt_to_page(addr);
+	struct page *page = virt_to_page((void *)addr);
 	pgprot_t prot = *(pgprot_t *)data;
 
 	set_pte_ext(pte, mk_pte(page, prot), 0);
@@ -564,14 +566,6 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 	if (mask < 0xffffffffULL)
 		gfp |= GFP_DMA;
 
-	/*
-	 * Following is a work-around (a.k.a. hack) to prevent pages
-	 * with __GFP_COMP being passed to split_page() which cannot
-	 * handle them.  The real problem is that this flag probably
-	 * should be 0 on ARM as it is not supported on this
-	 * platform; see CONFIG_HUGETLBFS.
-	 */
-	gfp &= ~(__GFP_COMP);
 	args.gfp = gfp;
 
 	*handle = DMA_MAPPING_ERROR;
@@ -715,19 +709,21 @@ static void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
 	 * Mark the D-cache clean for these pages to avoid extra flushing.
 	 */
 	if (dir != DMA_TO_DEVICE && size >= PAGE_SIZE) {
-		unsigned long pfn;
-		size_t left = size;
-
-		pfn = page_to_pfn(page) + off / PAGE_SIZE;
-		off %= PAGE_SIZE;
-		if (off) {
-			pfn++;
-			left -= PAGE_SIZE - off;
-		}
-		while (left >= PAGE_SIZE) {
-			page = pfn_to_page(pfn++);
-			set_bit(PG_dcache_clean, &page->flags);
-			left -= PAGE_SIZE;
+		struct folio *folio = pfn_folio(paddr / PAGE_SIZE);
+		size_t offset = offset_in_folio(folio, paddr);
+
+		for (;;) {
+			size_t sz = folio_size(folio) - offset;
+
+			if (size < sz)
+				break;
+			if (!offset)
+				set_bit(PG_dcache_clean, &folio->flags.f);
+			offset = 0;
+			size -= sz;
+			if (!size)
+				break;
+			folio = folio_next(folio);
 		}
 	}
 }
@@ -863,10 +859,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size,
 	int i = 0;
 	int order_idx = 0;
 
-	if (array_size <= PAGE_SIZE)
-		pages = kzalloc(array_size, GFP_KERNEL);
-	else
-		pages = vzalloc(array_size);
+	pages = kvzalloc(array_size, GFP_KERNEL);
 	if (!pages)
 		return NULL;
 
@@ -992,7 +985,8 @@ __iommu_create_mapping(struct device *dev, struct page **pages, size_t size,
 
 		len = (j - i) << PAGE_SHIFT;
 		ret = iommu_map(mapping->domain, iova, phys, len,
-				__dma_info_to_prot(DMA_BIDIRECTIONAL, attrs));
+				__dma_info_to_prot(DMA_BIDIRECTIONAL, attrs),
+				GFP_KERNEL);
 		if (ret < 0)
 			goto fail;
 		iova += len;
@@ -1093,15 +1087,6 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
 		return __iommu_alloc_simple(dev, size, gfp, handle,
 					    coherent_flag, attrs);
 
-	/*
-	 * Following is a work-around (a.k.a. hack) to prevent pages
-	 * with __GFP_COMP being passed to split_page() which cannot
-	 * handle them.  The real problem is that this flag probably
-	 * should be 0 on ARM as it is not supported on this
-	 * platform; see CONFIG_HUGETLBFS.
-	 */
-	gfp &= ~(__GFP_COMP);
-
 	pages = __iommu_alloc_buffer(dev, size, gfp, attrs, coherent_flag);
 	if (!pages)
 		return NULL;
@@ -1224,7 +1209,8 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
 
 		prot = __dma_info_to_prot(dir, attrs);
 
-		ret = iommu_map(mapping->domain, iova, phys, len, prot);
+		ret = iommu_map(mapping->domain, iova, phys, len, prot,
+				GFP_KERNEL);
 		if (ret < 0)
 			goto fail;
 		count += len >> PAGE_SHIFT;
@@ -1396,7 +1382,8 @@ static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page,
 
 	prot = __dma_info_to_prot(dir, attrs);
 
-	ret = iommu_map(mapping->domain, dma_addr, page_to_phys(page), len, prot);
+	ret = iommu_map(mapping->domain, dma_addr, page_to_phys(page), len,
+			prot, GFP_KERNEL);
 	if (ret < 0)
 		goto fail;
 
@@ -1460,7 +1447,7 @@ static dma_addr_t arm_iommu_map_resource(struct device *dev,
 
 	prot = __dma_info_to_prot(dir, attrs) | IOMMU_MMIO;
 
-	ret = iommu_map(mapping->domain, dma_addr, addr, len, prot);
+	ret = iommu_map(mapping->domain, dma_addr, addr, len, prot, GFP_KERNEL);
 	if (ret < 0)
 		goto fail;
 
@@ -1545,7 +1532,7 @@ static const struct dma_map_ops iommu_ops = {
 
 /**
  * arm_iommu_create_mapping
- * @bus: pointer to the bus holding the client device (for IOMMU calls)
+ * @dev: pointer to the client device (for IOMMU calls)
  * @base: start address of the valid IO address space
  * @size: maximum size of the valid IO address space
  *
@@ -1557,7 +1544,7 @@ static const struct dma_map_ops iommu_ops = {
  * arm_iommu_attach_device function.
  */
 struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size)
+arm_iommu_create_mapping(struct device *dev, dma_addr_t base, u64 size)
 {
 	unsigned int bits = size >> PAGE_SHIFT;
 	unsigned int bitmap_size = BITS_TO_LONGS(bits) * sizeof(long);
@@ -1598,9 +1585,11 @@ arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size)
 
 	spin_lock_init(&mapping->lock);
 
-	mapping->domain = iommu_domain_alloc(bus);
-	if (!mapping->domain)
+	mapping->domain = iommu_paging_domain_alloc(dev);
+	if (IS_ERR(mapping->domain)) {
+		err = PTR_ERR(mapping->domain);
 		goto err4;
+	}
 
 	kref_init(&mapping->kref);
 	return mapping;
@@ -1722,12 +1711,16 @@ void arm_iommu_detach_device(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(arm_iommu_detach_device);
 
-static void arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
-				    const struct iommu_ops *iommu, bool coherent)
+static void arm_setup_iommu_dma_ops(struct device *dev)
 {
 	struct dma_iommu_mapping *mapping;
+	u64 dma_base = 0, size = 1ULL << 32;
 
-	mapping = arm_iommu_create_mapping(dev->bus, dma_base, size);
+	if (dev->dma_range_map) {
+		dma_base = dma_range_map_min(dev->dma_range_map);
+		size = dma_range_map_max(dev->dma_range_map) - dma_base;
+	}
+	mapping = arm_iommu_create_mapping(dev, dma_base, size);
 	if (IS_ERR(mapping)) {
 		pr_warn("Failed to create %llu-byte IOMMU mapping for device %s\n",
 				size, dev_name(dev));
@@ -1757,8 +1750,7 @@ static void arm_teardown_iommu_dma_ops(struct device *dev)
 
 #else
 
-static void arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
-				    const struct iommu_ops *iommu, bool coherent)
+static void arm_setup_iommu_dma_ops(struct device *dev)
 {
 }
 
@@ -1766,11 +1758,16 @@ static void arm_teardown_iommu_dma_ops(struct device *dev) { }
 
 #endif	/* CONFIG_ARM_DMA_USE_IOMMU */
 
-void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-			const struct iommu_ops *iommu, bool coherent)
+void arch_setup_dma_ops(struct device *dev, bool coherent)
 {
-	dev->archdata.dma_coherent = coherent;
-	dev->dma_coherent = coherent;
+	/*
+	 * Due to legacy code that sets the ->dma_coherent flag from a bus
+	 * notifier we can't just assign coherent to the ->dma_coherent flag
+	 * here, but instead have to make sure we only set but never clear it
+	 * for now.
+	 */
+	if (coherent)
+		dev->dma_coherent = true;
 
 	/*
 	 * Don't override the dma_ops if they have already been set. Ideally
@@ -1780,8 +1777,8 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 	if (dev->dma_ops)
 		return;
 
-	if (iommu)
-		arm_setup_iommu_dma_ops(dev, dma_base, size, iommu, coherent);
+	if (device_iommu_mapped(dev))
+		arm_setup_iommu_dma_ops(dev);
 
 	xen_setup_dma_ops(dev);
 	dev->archdata.dma_ops_setup = true;
diff --git a/arch/arm/mm/dump.c b/arch/arm/mm/dump.c
index fb688003d156..cd032522d902 100644
--- a/arch/arm/mm/dump.c
+++ b/arch/arm/mm/dump.c
@@ -15,7 +15,7 @@
 
 #include <asm/domain.h>
 #include <asm/fixmap.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/ptdump.h>
 
 static struct addr_marker address_markers[] = {
@@ -26,7 +26,7 @@ static struct addr_marker address_markers[] = {
 	{ MODULES_VADDR,	"Modules" },
 	{ PAGE_OFFSET,		"Kernel Mapping" },
 	{ 0,			"vmalloc() Area" },
-	{ VMALLOC_END,		"vmalloc() End" },
+	{ FDT_FIXED_BASE,	"FDT Area" },
 	{ FIXADDR_START,	"Fixmap Area" },
 	{ VECTORS_BASE,	"Vectors" },
 	{ VECTORS_BASE + PAGE_SIZE * 2, "Vectors End" },
@@ -200,6 +200,7 @@ static const struct prot_bits section_bits[] = {
 };
 
 struct pg_level {
+	const char *name;
 	const struct prot_bits *bits;
 	size_t num;
 	u64 mask;
@@ -213,9 +214,11 @@ static struct pg_level pg_level[] = {
 	}, { /* p4d */
 	}, { /* pud */
 	}, { /* pmd */
+		.name	= (CONFIG_PGTABLE_LEVELS > 2) ? "PMD" : "PGD",
 		.bits	= section_bits,
 		.num	= ARRAY_SIZE(section_bits),
 	}, { /* pte */
+		.name	= "PTE",
 		.bits	= pte_bits,
 		.num	= ARRAY_SIZE(pte_bits),
 	},
@@ -282,7 +285,8 @@ static void note_page(struct pg_state *st, unsigned long addr,
 				delta >>= 10;
 				unit++;
 			}
-			pt_dump_seq_printf(st->seq, "%9lu%c", delta, *unit);
+			pt_dump_seq_printf(st->seq, "%9lu%c %s", delta, *unit,
+					   pg_level[st->level].name);
 			if (st->current_domain)
 				pt_dump_seq_printf(st->seq, " %s",
 							st->current_domain);
@@ -345,12 +349,12 @@ static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start)
 	for (i = 0; i < PTRS_PER_PMD; i++, pmd++) {
 		addr = start + i * PMD_SIZE;
 		domain = get_domain_name(pmd);
-		if (pmd_none(*pmd) || pmd_large(*pmd) || !pmd_present(*pmd))
-			note_page(st, addr, 3, pmd_val(*pmd), domain);
+		if (pmd_none(*pmd) || pmd_leaf(*pmd) || !pmd_present(*pmd))
+			note_page(st, addr, 4, pmd_val(*pmd), domain);
 		else
 			walk_pte(st, pmd, addr, domain);
 
-		if (SECTION_SIZE < PMD_SIZE && pmd_large(pmd[1])) {
+		if (SECTION_SIZE < PMD_SIZE && pmd_leaf(pmd[1])) {
 			addr += SECTION_SIZE;
 			pmd++;
 			domain = get_domain_name(pmd);
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index 0e49154454a6..91e488767783 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -61,32 +61,8 @@ static int do_adjust_pte(struct vm_area_struct *vma, unsigned long address,
 	return ret;
 }
 
-#if USE_SPLIT_PTE_PTLOCKS
-/*
- * If we are using split PTE locks, then we need to take the page
- * lock here.  Otherwise we are using shared mm->page_table_lock
- * which is already locked, thus cannot take it.
- */
-static inline void do_pte_lock(spinlock_t *ptl)
-{
-	/*
-	 * Use nested version here to indicate that we are already
-	 * holding one similar spinlock.
-	 */
-	spin_lock_nested(ptl, SINGLE_DEPTH_NESTING);
-}
-
-static inline void do_pte_unlock(spinlock_t *ptl)
-{
-	spin_unlock(ptl);
-}
-#else /* !USE_SPLIT_PTE_PTLOCKS */
-static inline void do_pte_lock(spinlock_t *ptl) {}
-static inline void do_pte_unlock(spinlock_t *ptl) {}
-#endif /* USE_SPLIT_PTE_PTLOCKS */
-
 static int adjust_pte(struct vm_area_struct *vma, unsigned long address,
-	unsigned long pfn)
+		      unsigned long pfn, bool need_lock)
 {
 	spinlock_t *ptl;
 	pgd_t *pgd;
@@ -94,6 +70,7 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address,
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
+	pmd_t pmdval;
 	int ret;
 
 	pgd = pgd_offset(vma->vm_mm, address);
@@ -112,18 +89,32 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address,
 	if (pmd_none_or_clear_bad(pmd))
 		return 0;
 
+again:
 	/*
 	 * This is called while another page table is mapped, so we
 	 * must use the nested version.  This also means we need to
 	 * open-code the spin-locking.
 	 */
-	ptl = pte_lockptr(vma->vm_mm, pmd);
-	pte = pte_offset_map(pmd, address);
-	do_pte_lock(ptl);
+	pte = pte_offset_map_rw_nolock(vma->vm_mm, pmd, address, &pmdval, &ptl);
+	if (!pte)
+		return 0;
+
+	if (need_lock) {
+		/*
+		 * Use nested version here to indicate that we are already
+		 * holding one similar spinlock.
+		 */
+		spin_lock_nested(ptl, SINGLE_DEPTH_NESTING);
+		if (unlikely(!pmd_same(pmdval, pmdp_get_lockless(pmd)))) {
+			pte_unmap_unlock(pte, ptl);
+			goto again;
+		}
+	}
 
 	ret = do_adjust_pte(vma, address, pfn, pte);
 
-	do_pte_unlock(ptl);
+	if (need_lock)
+		spin_unlock(ptl);
 	pte_unmap(pte);
 
 	return ret;
@@ -131,8 +122,10 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address,
 
 static void
 make_coherent(struct address_space *mapping, struct vm_area_struct *vma,
-	unsigned long addr, pte_t *ptep, unsigned long pfn)
+	      unsigned long addr, pte_t *ptep, unsigned long pfn)
 {
+	const unsigned long pmd_start_addr = ALIGN_DOWN(addr, PMD_SIZE);
+	const unsigned long pmd_end_addr = pmd_start_addr + PMD_SIZE;
 	struct mm_struct *mm = vma->vm_mm;
 	struct vm_area_struct *mpnt;
 	unsigned long offset;
@@ -149,6 +142,14 @@ make_coherent(struct address_space *mapping, struct vm_area_struct *vma,
 	flush_dcache_mmap_lock(mapping);
 	vma_interval_tree_foreach(mpnt, &mapping->i_mmap, pgoff, pgoff) {
 		/*
+		 * If we are using split PTE locks, then we need to take the pte
+		 * lock. Otherwise we are using shared mm->page_table_lock which
+		 * is already locked, thus cannot take it.
+		 */
+		bool need_lock = IS_ENABLED(CONFIG_SPLIT_PTE_PTLOCKS);
+		unsigned long mpnt_addr;
+
+		/*
 		 * If this VMA is not in our MM, we can ignore it.
 		 * Note that we intentionally mask out the VMA
 		 * that we are fixing up.
@@ -158,7 +159,12 @@ make_coherent(struct address_space *mapping, struct vm_area_struct *vma,
 		if (!(mpnt->vm_flags & VM_MAYSHARE))
 			continue;
 		offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
-		aliases += adjust_pte(mpnt, mpnt->vm_start + offset, pfn);
+		mpnt_addr = mpnt->vm_start + offset;
+
+		/* Avoid deadlocks by not grabbing the same PTE lock again. */
+		if (mpnt_addr >= pmd_start_addr && mpnt_addr < pmd_end_addr)
+			need_lock = false;
+		aliases += adjust_pte(mpnt, mpnt_addr, pfn, need_lock);
 	}
 	flush_dcache_mmap_unlock(mapping);
 	if (aliases)
@@ -178,12 +184,12 @@ make_coherent(struct address_space *mapping, struct vm_area_struct *vma,
  *
  * Note that the pte lock will be held.
  */
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
-	pte_t *ptep)
+void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
+		unsigned long addr, pte_t *ptep, unsigned int nr)
 {
 	unsigned long pfn = pte_pfn(*ptep);
 	struct address_space *mapping;
-	struct page *page;
+	struct folio *folio;
 
 	if (!pfn_valid(pfn))
 		return;
@@ -192,13 +198,13 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
 	 * The zero page is never written to, so never has any dirty
 	 * cache lines, and therefore never needs to be flushed.
 	 */
-	page = pfn_to_page(pfn);
-	if (page == ZERO_PAGE(0))
+	if (is_zero_pfn(pfn))
 		return;
 
-	mapping = page_mapping_file(page);
-	if (!test_and_set_bit(PG_dcache_clean, &page->flags))
-		__flush_dcache_page(mapping, page);
+	folio = page_folio(pfn_to_page(pfn));
+	mapping = folio_flush_mapping(folio);
+	if (!test_and_set_bit(PG_dcache_clean, &folio->flags.f))
+		__flush_dcache_folio(mapping, folio);
 	if (mapping) {
 		if (cache_is_vivt())
 			make_coherent(mapping, vma, addr, ptep, pfn);
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 46cccd6bf705..ed4330cc3f4e 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -27,6 +27,13 @@
 
 #ifdef CONFIG_MMU
 
+bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
+{
+	unsigned long addr = (unsigned long)unsafe_src;
+
+	return addr >= TASK_SIZE && ULONG_MAX - addr >= size;
+}
+
 /*
  * This is useful to dump out the page tables associated with
  * 'addr' in mm 'mm'.
@@ -85,6 +92,9 @@ void show_pte(const char *lvl, struct mm_struct *mm, unsigned long addr)
 			break;
 
 		pte = pte_offset_map(pmd, addr);
+		if (!pte)
+			break;
+
 		pr_cont(", *pte=%08llx", (long long)pte_val(*pte));
 #ifndef CONFIG_ARM_LPAE
 		pr_cont(", *ppte=%08llx",
@@ -105,14 +115,40 @@ static inline bool is_write_fault(unsigned int fsr)
 	return (fsr & FSR_WRITE) && !(fsr & FSR_CM);
 }
 
+static inline bool is_translation_fault(unsigned int fsr)
+{
+	int fs = fsr_fs(fsr);
+#ifdef CONFIG_ARM_LPAE
+	if ((fs & FS_MMU_NOLL_MASK) == FS_TRANS_NOLL)
+		return true;
+#else
+	if (fs == FS_L1_TRANS || fs == FS_L2_TRANS)
+		return true;
+#endif
+	return false;
+}
+
+static inline bool is_permission_fault(unsigned int fsr)
+{
+	int fs = fsr_fs(fsr);
+#ifdef CONFIG_ARM_LPAE
+	if ((fs & FS_MMU_NOLL_MASK) == FS_PERM_NOLL)
+		return true;
+#else
+	if (fs == FS_L1_PERM || fs == FS_L2_PERM)
+		return true;
+#endif
+	return false;
+}
+
 static void die_kernel_fault(const char *msg, struct mm_struct *mm,
 			     unsigned long addr, unsigned int fsr,
 			     struct pt_regs *regs)
 {
 	bust_spinlocks(1);
 	pr_alert("8<--- cut here ---\n");
-	pr_alert("Unable to handle kernel %s at virtual address %08lx\n",
-		 msg, addr);
+	pr_alert("Unable to handle kernel %s at virtual address %08lx when %s\n",
+		 msg, addr, fsr & FSR_LNX_PF ? "execute" : str_write_read(fsr & FSR_WRITE));
 
 	show_pte(KERN_ALERT, mm, addr);
 	die("Oops", regs, fsr);
@@ -139,8 +175,11 @@ __do_kernel_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
 	 */
 	if (addr < PAGE_SIZE) {
 		msg = "NULL pointer dereference";
+	} else if (is_permission_fault(fsr) && fsr & FSR_LNX_PF) {
+		msg = "execution of memory";
 	} else {
-		if (kfence_handle_page_fault(addr, is_write_fault(fsr), regs))
+		if (is_translation_fault(fsr) &&
+		    kfence_handle_page_fault(addr, is_write_fault(fsr), regs))
 			return;
 
 		msg = "paging request";
@@ -159,9 +198,6 @@ __do_user_fault(unsigned long addr, unsigned int fsr, unsigned int sig,
 {
 	struct task_struct *tsk = current;
 
-	if (addr > TASK_SIZE)
-		harden_branch_predictor();
-
 #ifdef CONFIG_DEBUG_USER
 	if (((user_debug & UDBG_SEGV) && (sig == SIGSEGV)) ||
 	    ((user_debug & UDBG_BUS)  && (sig == SIGBUS))) {
@@ -201,61 +237,77 @@ void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 }
 
 #ifdef CONFIG_MMU
-#define VM_FAULT_BADMAP		((__force vm_fault_t)0x010000)
-#define VM_FAULT_BADACCESS	((__force vm_fault_t)0x020000)
-
-static inline bool is_permission_fault(unsigned int fsr)
+#ifdef CONFIG_CPU_TTBR0_PAN
+static inline bool ttbr0_usermode_access_allowed(struct pt_regs *regs)
 {
-	int fs = fsr_fs(fsr);
-#ifdef CONFIG_ARM_LPAE
-	if ((fs & FS_PERM_NOLL_MASK) == FS_PERM_NOLL)
+	struct svc_pt_regs *svcregs;
+
+	/* If we are in user mode: permission granted */
+	if (user_mode(regs))
 		return true;
+
+	/* uaccess state saved above pt_regs on SVC exception entry */
+	svcregs = to_svc_pt_regs(regs);
+
+	return !(svcregs->ttbcr & TTBCR_EPD0);
+}
 #else
-	if (fs == FS_L1_PERM || fs == FS_L2_PERM)
-		return true;
-#endif
-	return false;
+static inline bool ttbr0_usermode_access_allowed(struct pt_regs *regs)
+{
+	return true;
 }
+#endif
 
-static vm_fault_t __kprobes
-__do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int flags,
-		unsigned long vma_flags, struct pt_regs *regs)
+static int __kprobes
+do_kernel_address_page_fault(struct mm_struct *mm, unsigned long addr,
+			     unsigned int fsr, struct pt_regs *regs)
 {
-	struct vm_area_struct *vma = find_vma(mm, addr);
-	if (unlikely(!vma))
-		return VM_FAULT_BADMAP;
-
-	if (unlikely(vma->vm_start > addr)) {
-		if (!(vma->vm_flags & VM_GROWSDOWN))
-			return VM_FAULT_BADMAP;
-		if (addr < FIRST_USER_ADDRESS)
-			return VM_FAULT_BADMAP;
-		if (expand_stack(vma, addr))
-			return VM_FAULT_BADMAP;
-	}
+	if (user_mode(regs)) {
+		/*
+		 * Fault from user mode for a kernel space address. User mode
+		 * should not be faulting in kernel space, which includes the
+		 * vector/khelper page. Handle the branch predictor hardening
+		 * while interrupts are still disabled, then send a SIGSEGV.
+		 */
+		harden_branch_predictor();
+		__do_user_fault(addr, fsr, SIGSEGV, SEGV_MAPERR, regs);
+	} else {
+		/*
+		 * Fault from kernel mode. Enable interrupts if they were
+		 * enabled in the parent context. Section (upper page table)
+		 * translation faults are handled via do_translation_fault(),
+		 * so we will only get here for a non-present kernel space
+		 * PTE or PTE permission fault. This may happen in exceptional
+		 * circumstances and need the fixup tables to be walked.
+		 */
+		if (interrupts_enabled(regs))
+			local_irq_enable();
 
-	/*
-	 * ok, we have a good vm_area for this memory access, check the
-	 * permissions on the VMA allow for the fault which occurred.
-	 */
-	if (!(vma->vm_flags & vma_flags))
-		return VM_FAULT_BADACCESS;
+		__do_kernel_fault(mm, addr, fsr, regs);
+	}
 
-	return handle_mm_fault(vma, addr & PAGE_MASK, flags, regs);
+	return 0;
 }
 
 static int __kprobes
 do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
 	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
 	int sig, code;
 	vm_fault_t fault;
 	unsigned int flags = FAULT_FLAG_DEFAULT;
-	unsigned long vm_flags = VM_ACCESS_FLAGS;
+	vm_flags_t vm_flags = VM_ACCESS_FLAGS;
 
 	if (kprobe_page_fault(regs, fsr))
 		return 0;
 
+	/*
+	 * Handle kernel addresses faults separately, which avoids touching
+	 * the mmap lock from contexts that are not able to sleep.
+	 */
+	if (addr >= TASK_SIZE)
+		return do_kernel_address_page_fault(mm, addr, fsr, regs);
 
 	/* Enable interrupts if they were enabled in the parent context. */
 	if (interrupts_enabled(regs))
@@ -287,30 +339,67 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
 
 	/*
-	 * As per x86, we may deadlock here.  However, since the kernel only
-	 * validly references user space from well defined areas of the code,
-	 * we can bug out early if this is from code which shouldn't.
+	 * Privileged access aborts with CONFIG_CPU_TTBR0_PAN enabled are
+	 * routed via the translation fault mechanism. Check whether uaccess
+	 * is disabled while in kernel mode.
 	 */
-	if (!mmap_read_trylock(mm)) {
-		if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc))
+	if (!ttbr0_usermode_access_allowed(regs))
+		goto no_context;
+
+	if (!(flags & FAULT_FLAG_USER))
+		goto lock_mmap;
+
+	vma = lock_vma_under_rcu(mm, addr);
+	if (!vma)
+		goto lock_mmap;
+
+	if (!(vma->vm_flags & vm_flags)) {
+		vma_end_read(vma);
+		count_vm_vma_lock_event(VMA_LOCK_SUCCESS);
+		fault = 0;
+		code = SEGV_ACCERR;
+		goto bad_area;
+	}
+	fault = handle_mm_fault(vma, addr, flags | FAULT_FLAG_VMA_LOCK, regs);
+	if (!(fault & (VM_FAULT_RETRY | VM_FAULT_COMPLETED)))
+		vma_end_read(vma);
+
+	if (!(fault & VM_FAULT_RETRY)) {
+		count_vm_vma_lock_event(VMA_LOCK_SUCCESS);
+		goto done;
+	}
+	count_vm_vma_lock_event(VMA_LOCK_RETRY);
+	if (fault & VM_FAULT_MAJOR)
+		flags |= FAULT_FLAG_TRIED;
+
+	/* Quick path to respond to signals */
+	if (fault_signal_pending(fault, regs)) {
+		if (!user_mode(regs))
 			goto no_context;
+		return 0;
+	}
+lock_mmap:
+
 retry:
-		mmap_read_lock(mm);
-	} else {
-		/*
-		 * The above down_read_trylock() might have succeeded in
-		 * which case, we'll have missed the might_sleep() from
-		 * down_read()
-		 */
-		might_sleep();
-#ifdef CONFIG_DEBUG_VM
-		if (!user_mode(regs) &&
-		    !search_exception_tables(regs->ARM_pc))
-			goto no_context;
-#endif
+	vma = lock_mm_and_find_vma(mm, addr, regs);
+	if (unlikely(!vma)) {
+		fault = 0;
+		code = SEGV_MAPERR;
+		goto bad_area;
+	}
+
+	/*
+	 * ok, we have a good vm_area for this memory access, check the
+	 * permissions on the VMA allow for the fault which occurred.
+	 */
+	if (!(vma->vm_flags & vm_flags)) {
+		mmap_read_unlock(mm);
+		fault = 0;
+		code = SEGV_ACCERR;
+		goto bad_area;
 	}
 
-	fault = __do_page_fault(mm, addr, flags, vm_flags, regs);
+	fault = handle_mm_fault(vma, addr & PAGE_MASK, flags, regs);
 
 	/* If we need to retry but a fatal signal is pending, handle the
 	 * signal first. We do not need to release the mmap_lock because
@@ -334,13 +423,14 @@ retry:
 	}
 
 	mmap_read_unlock(mm);
+done:
 
-	/*
-	 * Handle the "normal" case first - VM_FAULT_MAJOR
-	 */
-	if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
+	/* Handle the "normal" case first */
+	if (likely(!(fault & VM_FAULT_ERROR)))
 		return 0;
 
+	code = SEGV_MAPERR;
+bad_area:
 	/*
 	 * If we are in kernel mode at this point, we
 	 * have no context to handle this fault with.
@@ -371,8 +461,6 @@ retry:
 		 * isn't in our memory map..
 		 */
 		sig = SIGSEGV;
-		code = fault == VM_FAULT_BADACCESS ?
-			SEGV_ACCERR : SEGV_MAPERR;
 	}
 
 	__do_user_fault(addr, fsr, sig, code, regs);
@@ -396,16 +484,20 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
  * We enter here because the first level page table doesn't contain
  * a valid entry for the address.
  *
- * If the address is in kernel space (>= TASK_SIZE), then we are
- * probably faulting in the vmalloc() area.
+ * If this is a user address (addr < TASK_SIZE), we handle this as a
+ * normal page fault. This leaves the remainder of the function to handle
+ * kernel address translation faults.
  *
- * If the init_task's first level page tables contains the relevant
- * entry, we copy the it to this task.  If not, we send the process
- * a signal, fixup the exception, or oops the kernel.
+ * Since user mode is not permitted to access kernel addresses, pass these
+ * directly to do_kernel_address_page_fault() to handle.
  *
- * NOTE! We MUST NOT take any locks for this case. We may be in an
- * interrupt or a critical region, and should only copy the information
- * from the master page table, nothing more.
+ * Otherwise, we're probably faulting in the vmalloc() area, so try to fix
+ * that up. Note that we must not take any locks or enable interrupts in
+ * this case.
+ *
+ * If vmalloc() fixup fails, that means the non-leaf page tables did not
+ * contain an entry for this address, so handle this via
+ * do_kernel_address_page_fault().
  */
 #ifdef CONFIG_MMU
 static int __kprobes
@@ -471,7 +563,8 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
 	return 0;
 
 bad_area:
-	do_bad_area(addr, fsr, regs);
+	do_kernel_address_page_fault(current->mm, addr, fsr, regs);
+
 	return 0;
 }
 #else					/* CONFIG_MMU */
@@ -491,7 +584,16 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
 static int
 do_sect_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
+	/*
+	 * If this is a kernel address, but from user mode, then userspace
+	 * is trying bad stuff. Invoke the branch predictor handling.
+	 * Interrupts are disabled here.
+	 */
+	if (addr >= TASK_SIZE && user_mode(regs))
+		harden_branch_predictor();
+
 	do_bad_area(addr, fsr, regs);
+
 	return 0;
 }
 #endif /* CONFIG_ARM_LPAE */
@@ -573,6 +675,7 @@ do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
 	if (!inf->fn(addr, ifsr | FSR_LNX_PF, regs))
 		return;
 
+	pr_alert("8<--- cut here ---\n");
 	pr_alert("Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n",
 		inf->name, ifsr, addr);
 
diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h
index 83b5ab32d7a4..e8f8c1902544 100644
--- a/arch/arm/mm/fault.h
+++ b/arch/arm/mm/fault.h
@@ -14,8 +14,9 @@
 
 #ifdef CONFIG_ARM_LPAE
 #define FSR_FS_AEA		17
+#define FS_TRANS_NOLL		0x4
 #define FS_PERM_NOLL		0xC
-#define FS_PERM_NOLL_MASK	0x3C
+#define FS_MMU_NOLL_MASK	0x3C
 
 static inline int fsr_fs(unsigned int fsr)
 {
@@ -23,8 +24,10 @@ static inline int fsr_fs(unsigned int fsr)
 }
 #else
 #define FSR_FS_AEA		22
-#define FS_L1_PERM             0xD
-#define FS_L2_PERM             0xF
+#define FS_L1_TRANS		0x5
+#define FS_L2_TRANS		0x7
+#define FS_L1_PERM		0xD
+#define FS_L2_PERM		0xF
 
 static inline int fsr_fs(unsigned int fsr)
 {
@@ -34,5 +37,9 @@ static inline int fsr_fs(unsigned int fsr)
 
 void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
 void early_abt_enable(void);
+asmlinkage void do_DataAbort(unsigned long addr, unsigned int fsr,
+			     struct pt_regs *regs);
+asmlinkage void do_PrefetchAbort(unsigned long addr, unsigned int ifsr,
+				 struct pt_regs *regs);
 
 #endif	/* __ARCH_ARM_FAULT_H */
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 7ff9feea13a6..19470d938b23 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -95,10 +95,10 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned
 		__flush_icache_all();
 }
 
-void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
+void flush_cache_pages(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn, unsigned int nr)
 {
 	if (cache_is_vivt()) {
-		vivt_flush_cache_page(vma, user_addr, pfn);
+		vivt_flush_cache_pages(vma, user_addr, pfn, nr);
 		return;
 	}
 
@@ -196,49 +196,50 @@ void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
 #endif
 }
 
-void __flush_dcache_page(struct address_space *mapping, struct page *page)
+void __flush_dcache_folio(struct address_space *mapping, struct folio *folio)
 {
 	/*
 	 * Writeback any data associated with the kernel mapping of this
 	 * page.  This ensures that data in the physical page is mutually
 	 * coherent with the kernels mapping.
 	 */
-	if (!PageHighMem(page)) {
-		__cpuc_flush_dcache_area(page_address(page), page_size(page));
+	if (!folio_test_highmem(folio)) {
+		__cpuc_flush_dcache_area(folio_address(folio),
+					folio_size(folio));
 	} else {
 		unsigned long i;
 		if (cache_is_vipt_nonaliasing()) {
-			for (i = 0; i < compound_nr(page); i++) {
-				void *addr = kmap_atomic(page + i);
+			for (i = 0; i < folio_nr_pages(folio); i++) {
+				void *addr = kmap_local_folio(folio,
+								i * PAGE_SIZE);
 				__cpuc_flush_dcache_area(addr, PAGE_SIZE);
-				kunmap_atomic(addr);
+				kunmap_local(addr);
 			}
 		} else {
-			for (i = 0; i < compound_nr(page); i++) {
-				void *addr = kmap_high_get(page + i);
+			for (i = 0; i < folio_nr_pages(folio); i++) {
+				void *addr = kmap_high_get(folio_page(folio, i));
 				if (addr) {
 					__cpuc_flush_dcache_area(addr, PAGE_SIZE);
-					kunmap_high(page + i);
+					kunmap_high(folio_page(folio, i));
 				}
 			}
 		}
 	}
 
 	/*
-	 * If this is a page cache page, and we have an aliasing VIPT cache,
+	 * If this is a page cache folio, and we have an aliasing VIPT cache,
 	 * we only need to do one flush - which would be at the relevant
-	 * userspace colour, which is congruent with page->index.
+	 * userspace colour, which is congruent with folio->index.
 	 */
 	if (mapping && cache_is_vipt_aliasing())
-		flush_pfn_alias(page_to_pfn(page),
-				page->index << PAGE_SHIFT);
+		flush_pfn_alias(folio_pfn(folio), folio_pos(folio));
 }
 
-static void __flush_dcache_aliases(struct address_space *mapping, struct page *page)
+static void __flush_dcache_aliases(struct address_space *mapping, struct folio *folio)
 {
 	struct mm_struct *mm = current->active_mm;
-	struct vm_area_struct *mpnt;
-	pgoff_t pgoff;
+	struct vm_area_struct *vma;
+	pgoff_t pgoff, pgoff_end;
 
 	/*
 	 * There are possible user space mappings of this page:
@@ -246,21 +247,36 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p
 	 *   data in the current VM view associated with this page.
 	 * - aliasing VIPT: we only need to find one mapping of this page.
 	 */
-	pgoff = page->index;
+	pgoff = folio->index;
+	pgoff_end = pgoff + folio_nr_pages(folio) - 1;
 
 	flush_dcache_mmap_lock(mapping);
-	vma_interval_tree_foreach(mpnt, &mapping->i_mmap, pgoff, pgoff) {
-		unsigned long offset;
+	vma_interval_tree_foreach(vma, &mapping->i_mmap, pgoff, pgoff_end) {
+		unsigned long start, offset, pfn;
+		unsigned int nr;
 
 		/*
 		 * If this VMA is not in our MM, we can ignore it.
 		 */
-		if (mpnt->vm_mm != mm)
+		if (vma->vm_mm != mm)
 			continue;
-		if (!(mpnt->vm_flags & VM_MAYSHARE))
+		if (!(vma->vm_flags & VM_MAYSHARE))
 			continue;
-		offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
-		flush_cache_page(mpnt, mpnt->vm_start + offset, page_to_pfn(page));
+
+		start = vma->vm_start;
+		pfn = folio_pfn(folio);
+		nr = folio_nr_pages(folio);
+		offset = pgoff - vma->vm_pgoff;
+		if (offset > -nr) {
+			pfn -= offset;
+			nr += offset;
+		} else {
+			start += offset * PAGE_SIZE;
+		}
+		if (start + nr * PAGE_SIZE > vma->vm_end)
+			nr = (vma->vm_end - start) / PAGE_SIZE;
+
+		flush_cache_pages(vma, start, pfn, nr);
 	}
 	flush_dcache_mmap_unlock(mapping);
 }
@@ -269,7 +285,7 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p
 void __sync_icache_dcache(pte_t pteval)
 {
 	unsigned long pfn;
-	struct page *page;
+	struct folio *folio;
 	struct address_space *mapping;
 
 	if (cache_is_vipt_nonaliasing() && !pte_exec(pteval))
@@ -279,14 +295,17 @@ void __sync_icache_dcache(pte_t pteval)
 	if (!pfn_valid(pfn))
 		return;
 
-	page = pfn_to_page(pfn);
+	folio = page_folio(pfn_to_page(pfn));
+	if (folio_test_reserved(folio))
+		return;
+
 	if (cache_is_vipt_aliasing())
-		mapping = page_mapping_file(page);
+		mapping = folio_flush_mapping(folio);
 	else
 		mapping = NULL;
 
-	if (!test_and_set_bit(PG_dcache_clean, &page->flags))
-		__flush_dcache_page(mapping, page);
+	if (!test_and_set_bit(PG_dcache_clean, &folio->flags.f))
+		__flush_dcache_folio(mapping, folio);
 
 	if (pte_exec(pteval))
 		__flush_icache_all();
@@ -312,7 +331,7 @@ void __sync_icache_dcache(pte_t pteval)
  * Note that we disable the lazy flush for SMP configurations where
  * the cache maintenance operations are not automatically broadcasted.
  */
-void flush_dcache_page(struct page *page)
+void flush_dcache_folio(struct folio *folio)
 {
 	struct address_space *mapping;
 
@@ -320,31 +339,36 @@ void flush_dcache_page(struct page *page)
 	 * The zero page is never written to, so never has any dirty
 	 * cache lines, and therefore never needs to be flushed.
 	 */
-	if (page == ZERO_PAGE(0))
+	if (is_zero_pfn(folio_pfn(folio)))
 		return;
 
 	if (!cache_ops_need_broadcast() && cache_is_vipt_nonaliasing()) {
-		if (test_bit(PG_dcache_clean, &page->flags))
-			clear_bit(PG_dcache_clean, &page->flags);
+		if (test_bit(PG_dcache_clean, &folio->flags.f))
+			clear_bit(PG_dcache_clean, &folio->flags.f);
 		return;
 	}
 
-	mapping = page_mapping_file(page);
+	mapping = folio_flush_mapping(folio);
 
 	if (!cache_ops_need_broadcast() &&
-	    mapping && !page_mapcount(page))
-		clear_bit(PG_dcache_clean, &page->flags);
+	    mapping && !folio_mapped(folio))
+		clear_bit(PG_dcache_clean, &folio->flags.f);
 	else {
-		__flush_dcache_page(mapping, page);
+		__flush_dcache_folio(mapping, folio);
 		if (mapping && cache_is_vivt())
-			__flush_dcache_aliases(mapping, page);
+			__flush_dcache_aliases(mapping, folio);
 		else if (mapping)
 			__flush_icache_all();
-		set_bit(PG_dcache_clean, &page->flags);
+		set_bit(PG_dcache_clean, &folio->flags.f);
 	}
 }
-EXPORT_SYMBOL(flush_dcache_page);
+EXPORT_SYMBOL(flush_dcache_folio);
 
+void flush_dcache_page(struct page *page)
+{
+	flush_dcache_folio(page_folio(page));
+}
+EXPORT_SYMBOL(flush_dcache_page);
 /*
  * Flush an anonymous page so that users of get_user_pages()
  * can safely access the data.  The expected sequence is:
@@ -354,6 +378,7 @@ EXPORT_SYMBOL(flush_dcache_page);
  *  memcpy() to/from page
  *  if written to page, flush_dcache_page()
  */
+void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr);
 void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr)
 {
 	unsigned long pfn;
diff --git a/arch/arm/mm/hugetlbpage.c b/arch/arm/mm/hugetlbpage.c
deleted file mode 100644
index dd7a0277c5c0..000000000000
--- a/arch/arm/mm/hugetlbpage.c
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mm/hugetlbpage.c
- *
- * Copyright (C) 2012 ARM Ltd.
- *
- * Based on arch/x86/include/asm/hugetlb.h and Bill Carson's patches
- */
-
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/hugetlb.h>
-#include <linux/pagemap.h>
-#include <linux/err.h>
-#include <linux/sysctl.h>
-#include <asm/mman.h>
-#include <asm/tlb.h>
-#include <asm/tlbflush.h>
-
-/*
- * On ARM, huge pages are backed by pmd's rather than pte's, so we do a lot
- * of type casting from pmd_t * to pte_t *.
- */
-
-int pud_huge(pud_t pud)
-{
-	return 0;
-}
-
-int pmd_huge(pmd_t pmd)
-{
-	return pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT);
-}
diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c
index 448e57c6f653..4a833e89782a 100644
--- a/arch/arm/mm/idmap.c
+++ b/arch/arm/mm/idmap.c
@@ -84,8 +84,15 @@ static void identity_mapping_add(pgd_t *pgd, const char *text_start,
 	unsigned long addr, end;
 	unsigned long next;
 
+#ifdef CONFIG_XIP_KERNEL
+	addr = (phys_addr_t)(text_start) - XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+		+ CONFIG_XIP_PHYS_ADDR;
+	end = (phys_addr_t)(text_end) - XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+		+ CONFIG_XIP_PHYS_ADDR;
+#else
 	addr = virt_to_idmap(text_start);
 	end = virt_to_idmap(text_end);
+#endif
 	pr_info("Setting up static identity map for 0x%lx - 0x%lx\n", addr, end);
 
 	prot |= PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index ce64bdb55a16..54bdca025c9f 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -22,11 +22,12 @@
 #include <linux/sizes.h>
 #include <linux/stop_machine.h>
 #include <linux/swiotlb.h>
+#include <linux/execmem.h>
 
 #include <asm/cp15.h>
 #include <asm/mach-types.h>
 #include <asm/memblock.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/prom.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
@@ -236,56 +237,17 @@ static inline void poison_init_mem(void *s, size_t count)
 		*p++ = 0xe7fddef0;
 }
 
-static void __init free_highpages(void)
-{
-#ifdef CONFIG_HIGHMEM
-	unsigned long max_low = max_low_pfn;
-	phys_addr_t range_start, range_end;
-	u64 i;
-
-	/* set highmem page free */
-	for_each_free_mem_range(i, NUMA_NO_NODE, MEMBLOCK_NONE,
-				&range_start, &range_end, NULL) {
-		unsigned long start = PFN_UP(range_start);
-		unsigned long end = PFN_DOWN(range_end);
-
-		/* Ignore complete lowmem entries */
-		if (end <= max_low)
-			continue;
-
-		/* Truncate partial highmem entries */
-		if (start < max_low)
-			start = max_low;
-
-		for (; start < end; start++)
-			free_highmem_page(pfn_to_page(start));
-	}
-#endif
-}
-
-/*
- * mem_init() marks the free areas in the mem_map and tells us how much
- * memory is free.  This is done after various parts of the system have
- * claimed their memory after the kernel image.
- */
-void __init mem_init(void)
+void __init arch_mm_preinit(void)
 {
 #ifdef CONFIG_ARM_LPAE
 	swiotlb_init(max_pfn > arm_dma_pfn_limit, SWIOTLB_VERBOSE);
 #endif
 
-	set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
-
-	/* this will put all unused low memory onto the freelists */
-	memblock_free_all();
-
 #ifdef CONFIG_SA1111
 	/* now that our DMA memory is actually so designated, we can free it */
-	free_reserved_area(__va(PHYS_OFFSET), swapper_pg_dir, -1, NULL);
+	memblock_phys_free(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
 #endif
 
-	free_highpages();
-
 	/*
 	 * Check boundaries twice: Some fundamental inconsistencies can
 	 * be detected at build time already.
@@ -418,7 +380,7 @@ static void set_section_perms(struct section_perm *perms, int n, bool set,
 
 }
 
-/**
+/*
  * update_sections_early intended to be called only through stop_machine
  * framework and executed by only one CPU while all other CPUs will spin and
  * wait, so no locking is required in this function.
@@ -458,7 +420,7 @@ static int __mark_rodata_ro(void *unused)
 void mark_rodata_ro(void)
 {
 	stop_machine(__mark_rodata_ro, NULL, NULL);
-	debug_checkwx();
+	arm_debug_checkwx();
 }
 
 #else
@@ -486,3 +448,47 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 	free_reserved_area((void *)start, (void *)end, -1, "initrd");
 }
 #endif
+
+#ifdef CONFIG_EXECMEM
+
+#ifdef CONFIG_XIP_KERNEL
+/*
+ * The XIP kernel text is mapped in the module area for modules and
+ * some other stuff to work without any indirect relocations.
+ * MODULES_VADDR is redefined here and not in asm/memory.h to avoid
+ * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off.
+ */
+#undef MODULES_VADDR
+#define MODULES_VADDR	(((unsigned long)_exiprom + ~PMD_MASK) & PMD_MASK)
+#endif
+
+#ifdef CONFIG_MMU
+static struct execmem_info execmem_info __ro_after_init;
+
+struct execmem_info __init *execmem_arch_setup(void)
+{
+	unsigned long fallback_start = 0, fallback_end = 0;
+
+	if (IS_ENABLED(CONFIG_ARM_MODULE_PLTS)) {
+		fallback_start = VMALLOC_START;
+		fallback_end = VMALLOC_END;
+	}
+
+	execmem_info = (struct execmem_info){
+		.ranges = {
+			[EXECMEM_DEFAULT] = {
+				.start	= MODULES_VADDR,
+				.end	= MODULES_END,
+				.pgprot	= PAGE_KERNEL_EXEC,
+				.alignment = 1,
+				.fallback_start	= fallback_start,
+				.fallback_end	= fallback_end,
+			},
+		},
+	};
+
+	return &execmem_info;
+}
+#endif /* CONFIG_MMU */
+
+#endif /* CONFIG_EXECMEM */
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 2129070065c3..27e64f782cb3 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -23,6 +23,7 @@
  */
 #include <linux/module.h>
 #include <linux/errno.h>
+#include <linux/kasan.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/io.h>
@@ -110,21 +111,45 @@ void __init add_static_vm_early(struct static_vm *svm)
 int ioremap_page(unsigned long virt, unsigned long phys,
 		 const struct mem_type *mtype)
 {
-	return ioremap_page_range(virt, virt + PAGE_SIZE, phys,
-				  __pgprot(mtype->prot_pte));
+	return vmap_page_range(virt, virt + PAGE_SIZE, phys,
+			       __pgprot(mtype->prot_pte));
 }
 EXPORT_SYMBOL(ioremap_page);
 
+#ifdef CONFIG_KASAN
+static unsigned long arm_kasan_mem_to_shadow(unsigned long addr)
+{
+	return (unsigned long)kasan_mem_to_shadow((void *)addr);
+}
+#else
+static unsigned long arm_kasan_mem_to_shadow(unsigned long addr)
+{
+	return 0;
+}
+#endif
+
+static void memcpy_pgd(struct mm_struct *mm, unsigned long start,
+		       unsigned long end)
+{
+	end = ALIGN(end, PGDIR_SIZE);
+	memcpy(pgd_offset(mm, start), pgd_offset_k(start),
+	       sizeof(pgd_t) * (pgd_index(end) - pgd_index(start)));
+}
+
 void __check_vmalloc_seq(struct mm_struct *mm)
 {
 	int seq;
 
 	do {
-		seq = atomic_read(&init_mm.context.vmalloc_seq);
-		memcpy(pgd_offset(mm, VMALLOC_START),
-		       pgd_offset_k(VMALLOC_START),
-		       sizeof(pgd_t) * (pgd_index(VMALLOC_END) -
-					pgd_index(VMALLOC_START)));
+		seq = atomic_read_acquire(&init_mm.context.vmalloc_seq);
+		memcpy_pgd(mm, VMALLOC_START, VMALLOC_END);
+		if (IS_ENABLED(CONFIG_KASAN_VMALLOC)) {
+			unsigned long start =
+				arm_kasan_mem_to_shadow(VMALLOC_START);
+			unsigned long end =
+				arm_kasan_mem_to_shadow(VMALLOC_END);
+			memcpy_pgd(mm, start, end);
+		}
 		/*
 		 * Use a store-release so that other CPUs that observe the
 		 * counter's new value are guaranteed to see the results of the
@@ -411,7 +436,7 @@ void __arm_iomem_set_ro(void __iomem *ptr, size_t size)
 	set_memory_ro((unsigned long)ptr, PAGE_ALIGN(size) / PAGE_SIZE);
 }
 
-void *arch_memremap_wb(phys_addr_t phys_addr, size_t size)
+void *arch_memremap_wb(phys_addr_t phys_addr, size_t size, unsigned long flags)
 {
 	return (__force void *)arch_ioremap_caller(phys_addr, size,
 						   MT_MEMORY_RW,
@@ -466,8 +491,8 @@ int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
 	if (res->end > IO_SPACE_LIMIT)
 		return -EINVAL;
 
-	return ioremap_page_range(vaddr, vaddr + resource_size(res), phys_addr,
-				  __pgprot(get_mem_type(pci_ioremap_mem_type)->prot_pte));
+	return vmap_page_range(vaddr, vaddr + resource_size(res), phys_addr,
+			       __pgprot(get_mem_type(pci_ioremap_mem_type)->prot_pte));
 }
 EXPORT_SYMBOL(pci_remap_iospace);
 
@@ -490,7 +515,5 @@ void __init early_ioremap_init(void)
 bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
 				 unsigned long flags)
 {
-	unsigned long pfn = PHYS_PFN(offset);
-
-	return memblock_is_map_memory(pfn);
+	return memblock_is_map_memory(offset);
 }
diff --git a/arch/arm/mm/kasan_init.c b/arch/arm/mm/kasan_init.c
index 29caee9c79ce..c6625e808bf8 100644
--- a/arch/arm/mm/kasan_init.c
+++ b/arch/arm/mm/kasan_init.c
@@ -17,7 +17,6 @@
 #include <asm/cputype.h>
 #include <asm/highmem.h>
 #include <asm/mach/map.h>
-#include <asm/memory.h>
 #include <asm/page.h>
 #include <asm/pgalloc.h>
 #include <asm/procinfo.h>
@@ -29,6 +28,12 @@ static pgd_t tmp_pgd_table[PTRS_PER_PGD] __initdata __aligned(PGD_SIZE);
 
 pmd_t tmp_pmd_table[PTRS_PER_PMD] __page_aligned_bss;
 
+static __init void *kasan_alloc_block_raw(size_t size)
+{
+	return memblock_alloc_try_nid_raw(size, size, __pa(MAX_DMA_ADDRESS),
+				      MEMBLOCK_ALLOC_NOLEAKTRACE, NUMA_NO_NODE);
+}
+
 static __init void *kasan_alloc_block(size_t size)
 {
 	return memblock_alloc_try_nid(size, size, __pa(MAX_DMA_ADDRESS),
@@ -51,7 +56,7 @@ static void __init kasan_pte_populate(pmd_t *pmdp, unsigned long addr,
 			if (!pte_none(READ_ONCE(*ptep)))
 				continue;
 
-			p = kasan_alloc_block(PAGE_SIZE);
+			p = kasan_alloc_block_raw(PAGE_SIZE);
 			if (!p) {
 				panic("%s failed to allocate shadow page for address 0x%lx\n",
 				      __func__, addr);
@@ -268,12 +273,17 @@ void __init kasan_init(void)
 
 	/*
 	 * 1. The module global variables are in MODULES_VADDR ~ MODULES_END,
-	 *    so we need to map this area.
+	 *    so we need to map this area if CONFIG_KASAN_VMALLOC=n. With
+	 *    VMALLOC support KASAN will manage this region dynamically,
+	 *    refer to kasan_populate_vmalloc() and ARM's implementation of
+	 *    module_alloc().
 	 * 2. PKMAP_BASE ~ PKMAP_BASE+PMD_SIZE's shadow and MODULES_VADDR
 	 *    ~ MODULES_END's shadow is in the same PMD_SIZE, so we can't
 	 *    use kasan_populate_zero_shadow.
 	 */
-	create_mapping((void *)MODULES_VADDR, (void *)(PKMAP_BASE + PMD_SIZE));
+	if (!IS_ENABLED(CONFIG_KASAN_VMALLOC) && IS_ENABLED(CONFIG_MODULES))
+		create_mapping((void *)MODULES_VADDR, (void *)(MODULES_END));
+	create_mapping((void *)PKMAP_BASE, (void *)(PKMAP_BASE + PMD_SIZE));
 
 	/*
 	 * KAsan may reuse the contents of kasan_early_shadow_pte directly, so
@@ -290,6 +300,6 @@ void __init kasan_init(void)
 	local_flush_tlb_all();
 
 	memset(kasan_early_shadow_page, 0, PAGE_SIZE);
-	pr_info("Kernel address sanitizer initialized\n");
 	init_task.kasan_depth = 0;
+	kasan_init_generic();
 }
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index d7ffccb7fea7..419316316711 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -45,7 +45,7 @@ struct mem_type {
 
 const struct mem_type *get_mem_type(unsigned int type);
 
-extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
+void __flush_dcache_folio(struct address_space *mapping, struct folio *folio);
 
 /*
  * ARM specific vm_struct->flags bits.
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index a0f8a0ca0788..3dbb383c26d5 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -28,13 +28,14 @@
  */
 unsigned long
 arch_get_unmapped_area(struct file *filp, unsigned long addr,
-		unsigned long len, unsigned long pgoff, unsigned long flags)
+		unsigned long len, unsigned long pgoff,
+		unsigned long flags, vm_flags_t vm_flags)
 {
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 	int do_align = 0;
 	int aliasing = cache_is_vipt_aliasing();
-	struct vm_unmapped_area_info info;
+	struct vm_unmapped_area_info info = {};
 
 	/*
 	 * We only need to do colour alignment if either the I or D
@@ -68,7 +69,6 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 			return addr;
 	}
 
-	info.flags = 0;
 	info.length = len;
 	info.low_limit = mm->mmap_base;
 	info.high_limit = TASK_SIZE;
@@ -79,15 +79,15 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 
 unsigned long
 arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
-			const unsigned long len, const unsigned long pgoff,
-			const unsigned long flags)
+		        const unsigned long len, const unsigned long pgoff,
+		        const unsigned long flags, vm_flags_t vm_flags)
 {
 	struct vm_area_struct *vma;
 	struct mm_struct *mm = current->mm;
 	unsigned long addr = addr0;
 	int do_align = 0;
 	int aliasing = cache_is_vipt_aliasing();
-	struct vm_unmapped_area_info info;
+	struct vm_unmapped_area_info info = {};
 
 	/*
 	 * We only need to do colour alignment if either the I or D
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index a49f0b9c0f75..8bac96e205ac 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -21,12 +21,13 @@
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/smp_plat.h>
+#include <asm/tcm.h>
 #include <asm/tlb.h>
 #include <asm/highmem.h>
 #include <asm/system_info.h>
 #include <asm/traps.h>
 #include <asm/procinfo.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/pgalloc.h>
 #include <asm/kasan_def.h>
 
@@ -37,7 +38,6 @@
 
 #include "fault.h"
 #include "mm.h"
-#include "tcm.h"
 
 extern unsigned long __atags_pointer;
 
@@ -300,7 +300,11 @@ static struct mem_type mem_types[] __ro_after_init = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 			     L_PTE_XN | L_PTE_RDONLY,
 		.prot_l1   = PMD_TYPE_TABLE,
+#ifdef CONFIG_ARM_LPAE
+		.prot_sect = PMD_TYPE_SECT | L_PMD_SECT_RDONLY | PMD_SECT_AP2,
+#else
 		.prot_sect = PMD_TYPE_SECT,
+#endif
 		.domain    = DOMAIN_KERNEL,
 	},
 	[MT_ROM] = {
@@ -722,22 +726,18 @@ EXPORT_SYMBOL(phys_mem_access_prot);
 
 static void __init *early_alloc(unsigned long sz)
 {
-	void *ptr = memblock_alloc(sz, sz);
+	return memblock_alloc_or_panic(sz, sz);
 
-	if (!ptr)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, sz, sz);
-
-	return ptr;
 }
 
 static void *__init late_alloc(unsigned long sz)
 {
-	void *ptr = (void *)__get_free_pages(GFP_PGTABLE_KERNEL, get_order(sz));
+	void *ptdesc = pagetable_alloc(GFP_PGTABLE_KERNEL & ~__GFP_HIGHMEM,
+			get_order(sz));
 
-	if (!ptr || !pgtable_pte_page_ctor(virt_to_page(ptr)))
+	if (!ptdesc || !pagetable_pte_ctor(NULL, ptdesc))
 		BUG();
-	return ptr;
+	return ptdesc_address(ptdesc);
 }
 
 static pte_t * __init arm_pte_alloc(pmd_t *pmd, unsigned long addr,
@@ -1022,10 +1022,7 @@ void __init iotable_init(struct map_desc *io_desc, int nr)
 	if (!nr)
 		return;
 
-	svm = memblock_alloc(sizeof(*svm) * nr, __alignof__(*svm));
-	if (!svm)
-		panic("%s: Failed to allocate %zu bytes align=0x%zx\n",
-		      __func__, sizeof(*svm) * nr, __alignof__(*svm));
+	svm = memblock_alloc_or_panic(sizeof(*svm) * nr, __alignof__(*svm));
 
 	for (md = io_desc; nr; md++, nr--) {
 		create_mapping(md);
@@ -1047,10 +1044,7 @@ void __init vm_reserve_area_early(unsigned long addr, unsigned long size,
 	struct vm_struct *vm;
 	struct static_vm *svm;
 
-	svm = memblock_alloc(sizeof(*svm), __alignof__(*svm));
-	if (!svm)
-		panic("%s: Failed to allocate %zu bytes align=0x%zx\n",
-		      __func__, sizeof(*svm), __alignof__(*svm));
+	svm = memblock_alloc_or_panic(sizeof(*svm), __alignof__(*svm));
 
 	vm = &svm->vm;
 	vm->addr = (void *)addr;
@@ -1398,18 +1392,6 @@ static void __init devicemaps_init(const struct machine_desc *mdesc)
 	}
 
 	/*
-	 * Map the kernel if it is XIP.
-	 * It is always first in the modulearea.
-	 */
-#ifdef CONFIG_XIP_KERNEL
-	map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
-	map.virtual = MODULES_VADDR;
-	map.length = ((unsigned long)_exiprom - map.virtual + ~SECTION_MASK) & SECTION_MASK;
-	map.type = MT_ROM;
-	create_mapping(&map);
-#endif
-
-	/*
 	 * Map the cache flushing regions.
 	 */
 #ifdef FLUSH_BASE
@@ -1598,12 +1580,27 @@ static void __init map_kernel(void)
 	 * This will only persist until we turn on proper memory management later on
 	 * and we remap the whole kernel with page granularity.
 	 */
+#ifdef CONFIG_XIP_KERNEL
+	phys_addr_t kernel_nx_start = kernel_sec_start;
+#else
 	phys_addr_t kernel_x_start = kernel_sec_start;
 	phys_addr_t kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE);
 	phys_addr_t kernel_nx_start = kernel_x_end;
+#endif
 	phys_addr_t kernel_nx_end = kernel_sec_end;
 	struct map_desc map;
 
+	/*
+	 * Map the kernel if it is XIP.
+	 * It is always first in the modulearea.
+	 */
+#ifdef CONFIG_XIP_KERNEL
+	map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
+	map.virtual = MODULES_VADDR;
+	map.length = ((unsigned long)_exiprom - map.virtual + ~SECTION_MASK) & SECTION_MASK;
+	map.type = MT_ROM;
+	create_mapping(&map);
+#else
 	map.pfn = __phys_to_pfn(kernel_x_start);
 	map.virtual = __phys_to_virt(kernel_x_start);
 	map.length = kernel_x_end - kernel_x_start;
@@ -1613,7 +1610,7 @@ static void __init map_kernel(void)
 	/* If the nx part is small it may end up covered by the tail of the RWX section */
 	if (kernel_x_end == kernel_nx_end)
 		return;
-
+#endif
 	map.pfn = __phys_to_pfn(kernel_nx_start);
 	map.virtual = __phys_to_virt(kernel_nx_start);
 	map.length = kernel_nx_end - kernel_nx_start;
@@ -1633,7 +1630,7 @@ static void __init early_paging_init(const struct machine_desc *mdesc)
 {
 	pgtables_remap *lpae_pgtables_remap;
 	unsigned long pa_pgd;
-	unsigned int cr, ttbcr;
+	u32 cr, ttbcr, tmp;
 	long long offset;
 
 	if (!mdesc->pv_fixup)
@@ -1682,9 +1679,10 @@ static void __init early_paging_init(const struct machine_desc *mdesc)
 	 */
 	cr = get_cr();
 	set_cr(cr & ~(CR_I | CR_C));
-	asm("mrc p15, 0, %0, c2, c0, 2" : "=r" (ttbcr));
-	asm volatile("mcr p15, 0, %0, c2, c0, 2"
-		: : "r" (ttbcr & ~(3 << 8 | 3 << 10)));
+	ttbcr = cpu_get_ttbcr();
+	/* Disable all kind of caching of the translation table */
+	tmp = ttbcr & ~(TTBCR_ORGN0_MASK | TTBCR_IRGN0_MASK);
+	cpu_set_ttbcr(tmp);
 	flush_cache_all();
 
 	/*
@@ -1696,7 +1694,7 @@ static void __init early_paging_init(const struct machine_desc *mdesc)
 	lpae_pgtables_remap(offset, pa_pgd);
 
 	/* Re-enable the caches and cacheable TLB walks */
-	asm volatile("mcr p15, 0, %0, c2, c0, 2" : : "r" (ttbcr));
+	cpu_set_ttbcr(ttbcr);
 	set_cr(cr);
 }
 
@@ -1758,6 +1756,11 @@ void __init paging_init(const struct machine_desc *mdesc)
 {
 	void *zero_page;
 
+#ifdef CONFIG_XIP_KERNEL
+	/* Store the kernel RW RAM region start/end in these variables */
+	kernel_sec_start = CONFIG_PHYS_OFFSET & SECTION_MASK;
+	kernel_sec_end = round_up(__pa(_end), SECTION_SIZE);
+#endif
 	pr_debug("physical kernel sections: 0x%08llx-0x%08llx\n",
 		 kernel_sec_start, kernel_sec_end);
 
@@ -1784,7 +1787,7 @@ void __init paging_init(const struct machine_desc *mdesc)
 	bootmem_init();
 
 	empty_zero_page = virt_to_page(zero_page);
-	__flush_dcache_page(NULL, empty_zero_page);
+	__flush_dcache_folio(NULL, page_folio(empty_zero_page));
 }
 
 void __init early_mm_init(const struct machine_desc *mdesc)
@@ -1793,8 +1796,8 @@ void __init early_mm_init(const struct machine_desc *mdesc)
 	early_paging_init(mdesc);
 }
 
-void set_pte_at(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep, pte_t pteval)
+void set_ptes(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pteval, unsigned int nr)
 {
 	unsigned long ext = 0;
 
@@ -1804,5 +1807,11 @@ void set_pte_at(struct mm_struct *mm, unsigned long addr,
 		ext |= PTE_EXT_NG;
 	}
 
-	set_pte_ext(ptep, pteval, ext);
+	for (;;) {
+		set_pte_ext(ptep, pteval, ext);
+		if (--nr == 0)
+			break;
+		ptep++;
+		pteval = pte_next_pfn(pteval);
+	}
 }
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index c42debaded95..d638cc87807e 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -21,11 +21,19 @@
 #include <asm/cputype.h>
 #include <asm/mpu.h>
 #include <asm/procinfo.h>
+#include <asm/idmap.h>
 
 #include "mm.h"
 
 unsigned long vectors_base;
 
+/*
+ * empty_zero_page is a special page that is used for
+ * zero-initialized data and COW.
+ */
+struct page *empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
+
 #ifdef CONFIG_ARM_MPU
 struct mpu_rgn_info mpu_rgn_info;
 #endif
@@ -148,9 +156,18 @@ void __init adjust_lowmem_bounds(void)
  */
 void __init paging_init(const struct machine_desc *mdesc)
 {
+	void *zero_page;
+
 	early_trap_init((void *)vectors_base);
 	mpu_setup();
+
+	/* allocate the zero page. */
+	zero_page = (void *)memblock_alloc_or_panic(PAGE_SIZE, PAGE_SIZE);
+
 	bootmem_init();
+
+	empty_zero_page = virt_to_page(zero_page);
+	flush_dcache_page(empty_zero_page);
 }
 
 /*
@@ -160,6 +177,12 @@ void setup_mm_for_reboot(void)
 {
 }
 
+void flush_dcache_folio(struct folio *folio)
+{
+	__cpuc_flush_dcache_area(folio_address(folio), folio_size(folio));
+}
+EXPORT_SYMBOL(flush_dcache_folio);
+
 void flush_dcache_page(struct page *page)
 {
 	__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
@@ -225,7 +248,7 @@ void __iomem *pci_remap_cfgspace(resource_size_t res_cookie, size_t size)
 EXPORT_SYMBOL_GPL(pci_remap_cfgspace);
 #endif
 
-void *arch_memremap_wb(phys_addr_t phys_addr, size_t size)
+void *arch_memremap_wb(phys_addr_t phys_addr, size_t size, unsigned long flags)
 {
 	return (void *)phys_addr;
 }
diff --git a/arch/arm/mm/pageattr.c b/arch/arm/mm/pageattr.c
index c3c34fe714b0..064ad508c149 100644
--- a/arch/arm/mm/pageattr.c
+++ b/arch/arm/mm/pageattr.c
@@ -25,7 +25,7 @@ static int change_page_range(pte_t *ptep, unsigned long addr, void *data)
 	return 0;
 }
 
-static bool in_range(unsigned long start, unsigned long size,
+static bool range_in_range(unsigned long start, unsigned long size,
 	unsigned long range_start, unsigned long range_end)
 {
 	return start >= range_start && start < range_end &&
@@ -63,8 +63,8 @@ static int change_memory_common(unsigned long addr, int numpages,
 	if (!size)
 		return 0;
 
-	if (!in_range(start, size, MODULES_VADDR, MODULES_END) &&
-	    !in_range(start, size, VMALLOC_START, VMALLOC_END))
+	if (!range_in_range(start, size, MODULES_VADDR, MODULES_END) &&
+	    !range_in_range(start, size, VMALLOC_START, VMALLOC_END))
 		return -EINVAL;
 
 	return __change_memory_common(start, size, set_mask, clear_mask);
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index f8e9bc58a84f..4eb81b7ed03a 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -17,11 +17,11 @@
 #include "mm.h"
 
 #ifdef CONFIG_ARM_LPAE
-#define __pgd_alloc()	kmalloc_array(PTRS_PER_PGD, sizeof(pgd_t), GFP_KERNEL)
-#define __pgd_free(pgd)	kfree(pgd)
+#define _pgd_alloc(mm)		kmalloc_array(PTRS_PER_PGD, sizeof(pgd_t), GFP_KERNEL | __GFP_ZERO)
+#define _pgd_free(mm, pgd)	kfree(pgd)
 #else
-#define __pgd_alloc()	(pgd_t *)__get_free_pages(GFP_KERNEL, 2)
-#define __pgd_free(pgd)	free_pages((unsigned long)pgd, 2)
+#define _pgd_alloc(mm)		__pgd_alloc(mm, 2)
+#define _pgd_free(mm, pgd)	__pgd_free(mm, pgd)
 #endif
 
 /*
@@ -35,12 +35,10 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 	pmd_t *new_pmd, *init_pmd;
 	pte_t *new_pte, *init_pte;
 
-	new_pgd = __pgd_alloc();
+	new_pgd = _pgd_alloc(mm);
 	if (!new_pgd)
 		goto no_pgd;
 
-	memset(new_pgd, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
-
 	/*
 	 * Copy over the kernel and IO PGD entries
 	 */
@@ -134,7 +132,7 @@ no_pmd:
 no_pud:
 	p4d_free(mm, new_p4d);
 no_p4d:
-	__pgd_free(new_pgd);
+	_pgd_free(mm, new_pgd);
 no_pgd:
 	return NULL;
 }
@@ -207,5 +205,5 @@ no_pgd:
 		p4d_free(mm, p4d);
 	}
 #endif
-	__pgd_free(pgd_base);
+	_pgd_free(mm, pgd_base);
 }
diff --git a/arch/arm/mm/physaddr.c b/arch/arm/mm/physaddr.c
index cf75819e4c13..3f263c840ebc 100644
--- a/arch/arm/mm/physaddr.c
+++ b/arch/arm/mm/physaddr.c
@@ -6,7 +6,7 @@
 #include <linux/mm.h>
 
 #include <asm/sections.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/fixmap.h>
 #include <asm/dma.h>
 
diff --git a/arch/arm/mm/pmsa-v8.c b/arch/arm/mm/pmsa-v8.c
index 8359748a19a1..28cdc5468406 100644
--- a/arch/arm/mm/pmsa-v8.c
+++ b/arch/arm/mm/pmsa-v8.c
@@ -11,7 +11,7 @@
 #include <asm/cputype.h>
 #include <asm/mpu.h>
 
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/sections.h>
 
 #include "mm.h"
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 6837cf7a4812..4612a4961e81 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -11,6 +11,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
@@ -56,18 +57,20 @@
 /*
  * cpu_arm1020_proc_init()
  */
-ENTRY(cpu_arm1020_proc_init)
+SYM_TYPED_FUNC_START(cpu_arm1020_proc_init)
 	ret	lr
+SYM_FUNC_END(cpu_arm1020_proc_init)
 
 /*
  * cpu_arm1020_proc_fin()
  */
-ENTRY(cpu_arm1020_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm1020_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000 		@ ...i............
 	bic	r0, r0, #0x000e 		@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
+SYM_FUNC_END(cpu_arm1020_proc_fin)
 
 /*
  * cpu_arm1020_reset(loc)
@@ -80,7 +83,7 @@ ENTRY(cpu_arm1020_proc_fin)
  */
 	.align	5
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm1020_reset)
+SYM_TYPED_FUNC_START(cpu_arm1020_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
@@ -92,16 +95,17 @@ ENTRY(cpu_arm1020_reset)
 	bic	ip, ip, #0x1100 		@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	ret	r0
-ENDPROC(cpu_arm1020_reset)
+SYM_FUNC_END(cpu_arm1020_reset)
 	.popsection
 
 /*
  * cpu_arm1020_do_idle()
  */
 	.align	5
-ENTRY(cpu_arm1020_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm1020_do_idle)
 	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
 	ret	lr
+SYM_FUNC_END(cpu_arm1020_do_idle)
 
 /* ================================= CACHE ================================ */
 
@@ -112,13 +116,13 @@ ENTRY(cpu_arm1020_do_idle)
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
-ENTRY(arm1020_flush_icache_all)
+SYM_TYPED_FUNC_START(arm1020_flush_icache_all)
 #ifndef CONFIG_CPU_ICACHE_DISABLE
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 #endif
 	ret	lr
-ENDPROC(arm1020_flush_icache_all)
+SYM_FUNC_END(arm1020_flush_icache_all)
 
 /*
  *	flush_user_cache_all()
@@ -126,14 +130,14 @@ ENDPROC(arm1020_flush_icache_all)
  *	Invalidate all cache entries in a particular address
  *	space.
  */
-ENTRY(arm1020_flush_user_cache_all)
-	/* FALLTHROUGH */
+SYM_FUNC_ALIAS(arm1020_flush_user_cache_all, arm1020_flush_kern_cache_all)
+
 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
-ENTRY(arm1020_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(arm1020_flush_kern_cache_all)
 	mov	r2, #VM_EXEC
 	mov	ip, #0
 __flush_whole_cache:
@@ -154,6 +158,7 @@ __flush_whole_cache:
 #endif
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm1020_flush_kern_cache_all)
 
 /*
  *	flush_user_cache_range(start, end, flags)
@@ -165,7 +170,7 @@ __flush_whole_cache:
  *	- end	- end address (exclusive)
  *	- flags	- vm_flags for this space
  */
-ENTRY(arm1020_flush_user_cache_range)
+SYM_TYPED_FUNC_START(arm1020_flush_user_cache_range)
 	mov	ip, #0
 	sub	r3, r1, r0			@ calculate total size
 	cmp	r3, #CACHE_DLIMIT
@@ -185,6 +190,7 @@ ENTRY(arm1020_flush_user_cache_range)
 #endif
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm1020_flush_user_cache_range)
 
 /*
  *	coherent_kern_range(start, end)
@@ -196,8 +202,11 @@ ENTRY(arm1020_flush_user_cache_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm1020_coherent_kern_range)
-	/* FALLTRHOUGH */
+SYM_TYPED_FUNC_START(arm1020_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	arm1020_coherent_user_range
+#endif
+SYM_FUNC_END(arm1020_coherent_kern_range)
 
 /*
  *	coherent_user_range(start, end)
@@ -209,7 +218,7 @@ ENTRY(arm1020_coherent_kern_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm1020_coherent_user_range)
+SYM_TYPED_FUNC_START(arm1020_coherent_user_range)
 	mov	ip, #0
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 	mcr	p15, 0, ip, c7, c10, 4
@@ -227,6 +236,7 @@ ENTRY(arm1020_coherent_user_range)
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	mov	r0, #0
 	ret	lr
+SYM_FUNC_END(arm1020_coherent_user_range)
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -237,7 +247,7 @@ ENTRY(arm1020_coherent_user_range)
  *	- addr	- kernel address
  *	- size	- region size
  */
-ENTRY(arm1020_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(arm1020_flush_kern_dcache_area)
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	add	r1, r0, r1
@@ -249,6 +259,7 @@ ENTRY(arm1020_flush_kern_dcache_area)
 #endif
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm1020_flush_kern_dcache_area)
 
 /*
  *	dma_inv_range(start, end)
@@ -314,7 +325,7 @@ arm1020_dma_clean_range:
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm1020_dma_flush_range)
+SYM_TYPED_FUNC_START(arm1020_dma_flush_range)
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	bic	r0, r0, #CACHE_DLINESIZE - 1
@@ -327,6 +338,7 @@ ENTRY(arm1020_dma_flush_range)
 #endif
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm1020_dma_flush_range)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -334,13 +346,13 @@ ENTRY(arm1020_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm1020_dma_map_area)
+SYM_TYPED_FUNC_START(arm1020_dma_map_area)
 	add	r1, r1, r0
 	cmp	r2, #DMA_TO_DEVICE
 	beq	arm1020_dma_clean_range
 	bcs	arm1020_dma_inv_range
 	b	arm1020_dma_flush_range
-ENDPROC(arm1020_dma_map_area)
+SYM_FUNC_END(arm1020_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -348,18 +360,12 @@ ENDPROC(arm1020_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm1020_dma_unmap_area)
+SYM_TYPED_FUNC_START(arm1020_dma_unmap_area)
 	ret	lr
-ENDPROC(arm1020_dma_unmap_area)
-
-	.globl	arm1020_flush_kern_cache_louis
-	.equ	arm1020_flush_kern_cache_louis, arm1020_flush_kern_cache_all
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm1020
+SYM_FUNC_END(arm1020_dma_unmap_area)
 
 	.align	5
-ENTRY(cpu_arm1020_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm1020_dcache_clean_area)
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	mov	ip, #0
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
@@ -369,6 +375,7 @@ ENTRY(cpu_arm1020_dcache_clean_area)
 	bhi	1b
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_arm1020_dcache_clean_area)
 
 /* =============================== PageTable ============================== */
 
@@ -380,7 +387,7 @@ ENTRY(cpu_arm1020_dcache_clean_area)
  * pgd: new page tables
  */
 	.align	5
-ENTRY(cpu_arm1020_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm1020_switch_mm)
 #ifdef CONFIG_MMU
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	mcr	p15, 0, r3, c7, c10, 4
@@ -408,14 +415,15 @@ ENTRY(cpu_arm1020_switch_mm)
 	mcr	p15, 0, r1, c8, c7, 0		@ invalidate I & D TLBs
 #endif /* CONFIG_MMU */
 	ret	lr
-        
+SYM_FUNC_END(cpu_arm1020_switch_mm)
+
 /*
  * cpu_arm1020_set_pte(ptep, pte)
  *
  * Set a PTE and flush it out
  */
 	.align	5
-ENTRY(cpu_arm1020_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_arm1020_set_pte_ext)
 #ifdef CONFIG_MMU
 	armv3_set_pte_ext
 	mov	r0, r0
@@ -426,6 +434,7 @@ ENTRY(cpu_arm1020_set_pte_ext)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 #endif /* CONFIG_MMU */
 	ret	lr
+SYM_FUNC_END(cpu_arm1020_set_pte_ext)
 
 	.type	__arm1020_setup, #function
 __arm1020_setup:
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index df49b10250b8..b4a8a3a8eda3 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -11,6 +11,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
@@ -56,18 +57,20 @@
 /*
  * cpu_arm1020e_proc_init()
  */
-ENTRY(cpu_arm1020e_proc_init)
+SYM_TYPED_FUNC_START(cpu_arm1020e_proc_init)
 	ret	lr
+SYM_FUNC_END(cpu_arm1020e_proc_init)
 
 /*
  * cpu_arm1020e_proc_fin()
  */
-ENTRY(cpu_arm1020e_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm1020e_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000 		@ ...i............
 	bic	r0, r0, #0x000e 		@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
+SYM_FUNC_END(cpu_arm1020e_proc_fin)
 
 /*
  * cpu_arm1020e_reset(loc)
@@ -80,7 +83,7 @@ ENTRY(cpu_arm1020e_proc_fin)
  */
 	.align	5
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm1020e_reset)
+SYM_TYPED_FUNC_START(cpu_arm1020e_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
@@ -92,16 +95,17 @@ ENTRY(cpu_arm1020e_reset)
 	bic	ip, ip, #0x1100 		@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	ret	r0
-ENDPROC(cpu_arm1020e_reset)
+SYM_FUNC_END(cpu_arm1020e_reset)
 	.popsection
 
 /*
  * cpu_arm1020e_do_idle()
  */
 	.align	5
-ENTRY(cpu_arm1020e_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm1020e_do_idle)
 	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
 	ret	lr
+SYM_FUNC_END(cpu_arm1020e_do_idle)
 
 /* ================================= CACHE ================================ */
 
@@ -112,13 +116,13 @@ ENTRY(cpu_arm1020e_do_idle)
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
-ENTRY(arm1020e_flush_icache_all)
+SYM_TYPED_FUNC_START(arm1020e_flush_icache_all)
 #ifndef CONFIG_CPU_ICACHE_DISABLE
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 #endif
 	ret	lr
-ENDPROC(arm1020e_flush_icache_all)
+SYM_FUNC_END(arm1020e_flush_icache_all)
 
 /*
  *	flush_user_cache_all()
@@ -126,14 +130,14 @@ ENDPROC(arm1020e_flush_icache_all)
  *	Invalidate all cache entries in a particular address
  *	space.
  */
-ENTRY(arm1020e_flush_user_cache_all)
-	/* FALLTHROUGH */
+SYM_FUNC_ALIAS(arm1020e_flush_user_cache_all, arm1020e_flush_kern_cache_all)
+
 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
-ENTRY(arm1020e_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(arm1020e_flush_kern_cache_all)
 	mov	r2, #VM_EXEC
 	mov	ip, #0
 __flush_whole_cache:
@@ -153,6 +157,7 @@ __flush_whole_cache:
 #endif
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm1020e_flush_kern_cache_all)
 
 /*
  *	flush_user_cache_range(start, end, flags)
@@ -164,7 +169,7 @@ __flush_whole_cache:
  *	- end	- end address (exclusive)
  *	- flags	- vm_flags for this space
  */
-ENTRY(arm1020e_flush_user_cache_range)
+SYM_TYPED_FUNC_START(arm1020e_flush_user_cache_range)
 	mov	ip, #0
 	sub	r3, r1, r0			@ calculate total size
 	cmp	r3, #CACHE_DLIMIT
@@ -182,6 +187,7 @@ ENTRY(arm1020e_flush_user_cache_range)
 #endif
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm1020e_flush_user_cache_range)
 
 /*
  *	coherent_kern_range(start, end)
@@ -193,8 +199,12 @@ ENTRY(arm1020e_flush_user_cache_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm1020e_coherent_kern_range)
-	/* FALLTHROUGH */
+SYM_TYPED_FUNC_START(arm1020e_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	arm1020e_coherent_user_range
+#endif
+SYM_FUNC_END(arm1020e_coherent_kern_range)
+
 /*
  *	coherent_user_range(start, end)
  *
@@ -205,7 +215,7 @@ ENTRY(arm1020e_coherent_kern_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm1020e_coherent_user_range)
+SYM_TYPED_FUNC_START(arm1020e_coherent_user_range)
 	mov	ip, #0
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:
@@ -221,6 +231,7 @@ ENTRY(arm1020e_coherent_user_range)
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	mov	r0, #0
 	ret	lr
+SYM_FUNC_END(arm1020e_coherent_user_range)
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -231,7 +242,7 @@ ENTRY(arm1020e_coherent_user_range)
  *	- addr	- kernel address
  *	- size	- region size
  */
-ENTRY(arm1020e_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(arm1020e_flush_kern_dcache_area)
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	add	r1, r0, r1
@@ -242,6 +253,7 @@ ENTRY(arm1020e_flush_kern_dcache_area)
 #endif
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm1020e_flush_kern_dcache_area)
 
 /*
  *	dma_inv_range(start, end)
@@ -302,7 +314,7 @@ arm1020e_dma_clean_range:
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm1020e_dma_flush_range)
+SYM_TYPED_FUNC_START(arm1020e_dma_flush_range)
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	bic	r0, r0, #CACHE_DLINESIZE - 1
@@ -313,6 +325,7 @@ ENTRY(arm1020e_dma_flush_range)
 #endif
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm1020e_dma_flush_range)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -320,13 +333,13 @@ ENTRY(arm1020e_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm1020e_dma_map_area)
+SYM_TYPED_FUNC_START(arm1020e_dma_map_area)
 	add	r1, r1, r0
 	cmp	r2, #DMA_TO_DEVICE
 	beq	arm1020e_dma_clean_range
 	bcs	arm1020e_dma_inv_range
 	b	arm1020e_dma_flush_range
-ENDPROC(arm1020e_dma_map_area)
+SYM_FUNC_END(arm1020e_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -334,18 +347,12 @@ ENDPROC(arm1020e_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm1020e_dma_unmap_area)
+SYM_TYPED_FUNC_START(arm1020e_dma_unmap_area)
 	ret	lr
-ENDPROC(arm1020e_dma_unmap_area)
-
-	.globl	arm1020e_flush_kern_cache_louis
-	.equ	arm1020e_flush_kern_cache_louis, arm1020e_flush_kern_cache_all
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm1020e
+SYM_FUNC_END(arm1020e_dma_unmap_area)
 
 	.align	5
-ENTRY(cpu_arm1020e_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm1020e_dcache_clean_area)
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	mov	ip, #0
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
@@ -354,6 +361,7 @@ ENTRY(cpu_arm1020e_dcache_clean_area)
 	bhi	1b
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_arm1020e_dcache_clean_area)
 
 /* =============================== PageTable ============================== */
 
@@ -365,7 +373,7 @@ ENTRY(cpu_arm1020e_dcache_clean_area)
  * pgd: new page tables
  */
 	.align	5
-ENTRY(cpu_arm1020e_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm1020e_switch_mm)
 #ifdef CONFIG_MMU
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	mcr	p15, 0, r3, c7, c10, 4
@@ -392,14 +400,15 @@ ENTRY(cpu_arm1020e_switch_mm)
 	mcr	p15, 0, r1, c8, c7, 0		@ invalidate I & D TLBs
 #endif
 	ret	lr
-        
+SYM_FUNC_END(cpu_arm1020e_switch_mm)
+
 /*
  * cpu_arm1020e_set_pte(ptep, pte)
  *
  * Set a PTE and flush it out
  */
 	.align	5
-ENTRY(cpu_arm1020e_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_arm1020e_set_pte_ext)
 #ifdef CONFIG_MMU
 	armv3_set_pte_ext
 	mov	r0, r0
@@ -408,6 +417,7 @@ ENTRY(cpu_arm1020e_set_pte_ext)
 #endif
 #endif /* CONFIG_MMU */
 	ret	lr
+SYM_FUNC_END(cpu_arm1020e_set_pte_ext)
 
 	.type	__arm1020e_setup, #function
 __arm1020e_setup:
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index e89ce467f672..709870e99e19 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -11,6 +11,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
@@ -56,18 +57,20 @@
 /*
  * cpu_arm1022_proc_init()
  */
-ENTRY(cpu_arm1022_proc_init)
+SYM_TYPED_FUNC_START(cpu_arm1022_proc_init)
 	ret	lr
+SYM_FUNC_END(cpu_arm1022_proc_init)
 
 /*
  * cpu_arm1022_proc_fin()
  */
-ENTRY(cpu_arm1022_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm1022_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000 		@ ...i............
 	bic	r0, r0, #0x000e 		@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
+SYM_FUNC_END(cpu_arm1022_proc_fin)
 
 /*
  * cpu_arm1022_reset(loc)
@@ -80,7 +83,7 @@ ENTRY(cpu_arm1022_proc_fin)
  */
 	.align	5
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm1022_reset)
+SYM_TYPED_FUNC_START(cpu_arm1022_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
@@ -92,16 +95,17 @@ ENTRY(cpu_arm1022_reset)
 	bic	ip, ip, #0x1100 		@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	ret	r0
-ENDPROC(cpu_arm1022_reset)
+SYM_FUNC_END(cpu_arm1022_reset)
 	.popsection
 
 /*
  * cpu_arm1022_do_idle()
  */
 	.align	5
-ENTRY(cpu_arm1022_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm1022_do_idle)
 	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
 	ret	lr
+SYM_FUNC_END(cpu_arm1022_do_idle)
 
 /* ================================= CACHE ================================ */
 
@@ -112,13 +116,13 @@ ENTRY(cpu_arm1022_do_idle)
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
-ENTRY(arm1022_flush_icache_all)
+SYM_TYPED_FUNC_START(arm1022_flush_icache_all)
 #ifndef CONFIG_CPU_ICACHE_DISABLE
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 #endif
 	ret	lr
-ENDPROC(arm1022_flush_icache_all)
+SYM_FUNC_END(arm1022_flush_icache_all)
 
 /*
  *	flush_user_cache_all()
@@ -126,14 +130,14 @@ ENDPROC(arm1022_flush_icache_all)
  *	Invalidate all cache entries in a particular address
  *	space.
  */
-ENTRY(arm1022_flush_user_cache_all)
-	/* FALLTHROUGH */
+SYM_FUNC_ALIAS(arm1022_flush_user_cache_all, arm1022_flush_kern_cache_all)
+
 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
-ENTRY(arm1022_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(arm1022_flush_kern_cache_all)
 	mov	r2, #VM_EXEC
 	mov	ip, #0
 __flush_whole_cache:
@@ -152,6 +156,7 @@ __flush_whole_cache:
 #endif
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm1022_flush_kern_cache_all)
 
 /*
  *	flush_user_cache_range(start, end, flags)
@@ -163,7 +168,7 @@ __flush_whole_cache:
  *	- end	- end address (exclusive)
  *	- flags	- vm_flags for this space
  */
-ENTRY(arm1022_flush_user_cache_range)
+SYM_TYPED_FUNC_START(arm1022_flush_user_cache_range)
 	mov	ip, #0
 	sub	r3, r1, r0			@ calculate total size
 	cmp	r3, #CACHE_DLIMIT
@@ -181,6 +186,7 @@ ENTRY(arm1022_flush_user_cache_range)
 #endif
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm1022_flush_user_cache_range)
 
 /*
  *	coherent_kern_range(start, end)
@@ -192,8 +198,11 @@ ENTRY(arm1022_flush_user_cache_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm1022_coherent_kern_range)
-	/* FALLTHROUGH */
+SYM_TYPED_FUNC_START(arm1022_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	arm1022_coherent_user_range
+#endif
+SYM_FUNC_END(arm1022_coherent_kern_range)
 
 /*
  *	coherent_user_range(start, end)
@@ -205,7 +214,7 @@ ENTRY(arm1022_coherent_kern_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm1022_coherent_user_range)
+SYM_TYPED_FUNC_START(arm1022_coherent_user_range)
 	mov	ip, #0
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:
@@ -221,6 +230,7 @@ ENTRY(arm1022_coherent_user_range)
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	mov	r0, #0
 	ret	lr
+SYM_FUNC_END(arm1022_coherent_user_range)
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -231,7 +241,7 @@ ENTRY(arm1022_coherent_user_range)
  *	- addr	- kernel address
  *	- size	- region size
  */
-ENTRY(arm1022_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(arm1022_flush_kern_dcache_area)
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	add	r1, r0, r1
@@ -242,6 +252,7 @@ ENTRY(arm1022_flush_kern_dcache_area)
 #endif
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm1022_flush_kern_dcache_area)
 
 /*
  *	dma_inv_range(start, end)
@@ -302,7 +313,7 @@ arm1022_dma_clean_range:
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm1022_dma_flush_range)
+SYM_TYPED_FUNC_START(arm1022_dma_flush_range)
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	bic	r0, r0, #CACHE_DLINESIZE - 1
@@ -313,6 +324,7 @@ ENTRY(arm1022_dma_flush_range)
 #endif
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm1022_dma_flush_range)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -320,13 +332,13 @@ ENTRY(arm1022_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm1022_dma_map_area)
+SYM_TYPED_FUNC_START(arm1022_dma_map_area)
 	add	r1, r1, r0
 	cmp	r2, #DMA_TO_DEVICE
 	beq	arm1022_dma_clean_range
 	bcs	arm1022_dma_inv_range
 	b	arm1022_dma_flush_range
-ENDPROC(arm1022_dma_map_area)
+SYM_FUNC_END(arm1022_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -334,18 +346,12 @@ ENDPROC(arm1022_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm1022_dma_unmap_area)
+SYM_TYPED_FUNC_START(arm1022_dma_unmap_area)
 	ret	lr
-ENDPROC(arm1022_dma_unmap_area)
-
-	.globl	arm1022_flush_kern_cache_louis
-	.equ	arm1022_flush_kern_cache_louis, arm1022_flush_kern_cache_all
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm1022
+SYM_FUNC_END(arm1022_dma_unmap_area)
 
 	.align	5
-ENTRY(cpu_arm1022_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm1022_dcache_clean_area)
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	mov	ip, #0
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
@@ -354,6 +360,7 @@ ENTRY(cpu_arm1022_dcache_clean_area)
 	bhi	1b
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_arm1022_dcache_clean_area)
 
 /* =============================== PageTable ============================== */
 
@@ -365,7 +372,7 @@ ENTRY(cpu_arm1022_dcache_clean_area)
  * pgd: new page tables
  */
 	.align	5
-ENTRY(cpu_arm1022_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm1022_switch_mm)
 #ifdef CONFIG_MMU
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	mov	r1, #(CACHE_DSEGMENTS - 1) << 5	@ 16 segments
@@ -385,14 +392,15 @@ ENTRY(cpu_arm1022_switch_mm)
 	mcr	p15, 0, r1, c8, c7, 0		@ invalidate I & D TLBs
 #endif
 	ret	lr
-        
+SYM_FUNC_END(cpu_arm1022_switch_mm)
+
 /*
  * cpu_arm1022_set_pte_ext(ptep, pte, ext)
  *
  * Set a PTE and flush it out
  */
 	.align	5
-ENTRY(cpu_arm1022_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_arm1022_set_pte_ext)
 #ifdef CONFIG_MMU
 	armv3_set_pte_ext
 	mov	r0, r0
@@ -401,6 +409,7 @@ ENTRY(cpu_arm1022_set_pte_ext)
 #endif
 #endif /* CONFIG_MMU */
 	ret	lr
+SYM_FUNC_END(cpu_arm1022_set_pte_ext)
 
 	.type	__arm1022_setup, #function
 __arm1022_setup:
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 7fdd1a205e8e..02f7370a8c5c 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -11,6 +11,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
@@ -56,18 +57,20 @@
 /*
  * cpu_arm1026_proc_init()
  */
-ENTRY(cpu_arm1026_proc_init)
+SYM_TYPED_FUNC_START(cpu_arm1026_proc_init)
 	ret	lr
+SYM_FUNC_END(cpu_arm1026_proc_init)
 
 /*
  * cpu_arm1026_proc_fin()
  */
-ENTRY(cpu_arm1026_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm1026_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000 		@ ...i............
 	bic	r0, r0, #0x000e 		@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
+SYM_FUNC_END(cpu_arm1026_proc_fin)
 
 /*
  * cpu_arm1026_reset(loc)
@@ -80,7 +83,7 @@ ENTRY(cpu_arm1026_proc_fin)
  */
 	.align	5
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm1026_reset)
+SYM_TYPED_FUNC_START(cpu_arm1026_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
@@ -92,16 +95,17 @@ ENTRY(cpu_arm1026_reset)
 	bic	ip, ip, #0x1100 		@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	ret	r0
-ENDPROC(cpu_arm1026_reset)
+SYM_FUNC_END(cpu_arm1026_reset)
 	.popsection
 
 /*
  * cpu_arm1026_do_idle()
  */
 	.align	5
-ENTRY(cpu_arm1026_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm1026_do_idle)
 	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
 	ret	lr
+SYM_FUNC_END(cpu_arm1026_do_idle)
 
 /* ================================= CACHE ================================ */
 
@@ -112,13 +116,13 @@ ENTRY(cpu_arm1026_do_idle)
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
-ENTRY(arm1026_flush_icache_all)
+SYM_TYPED_FUNC_START(arm1026_flush_icache_all)
 #ifndef CONFIG_CPU_ICACHE_DISABLE
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 #endif
 	ret	lr
-ENDPROC(arm1026_flush_icache_all)
+SYM_FUNC_END(arm1026_flush_icache_all)
 
 /*
  *	flush_user_cache_all()
@@ -126,14 +130,14 @@ ENDPROC(arm1026_flush_icache_all)
  *	Invalidate all cache entries in a particular address
  *	space.
  */
-ENTRY(arm1026_flush_user_cache_all)
-	/* FALLTHROUGH */
+SYM_FUNC_ALIAS(arm1026_flush_user_cache_all, arm1026_flush_kern_cache_all)
+
 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
-ENTRY(arm1026_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(arm1026_flush_kern_cache_all)
 	mov	r2, #VM_EXEC
 	mov	ip, #0
 __flush_whole_cache:
@@ -147,6 +151,7 @@ __flush_whole_cache:
 #endif
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm1026_flush_kern_cache_all)
 
 /*
  *	flush_user_cache_range(start, end, flags)
@@ -158,7 +163,7 @@ __flush_whole_cache:
  *	- end	- end address (exclusive)
  *	- flags	- vm_flags for this space
  */
-ENTRY(arm1026_flush_user_cache_range)
+SYM_TYPED_FUNC_START(arm1026_flush_user_cache_range)
 	mov	ip, #0
 	sub	r3, r1, r0			@ calculate total size
 	cmp	r3, #CACHE_DLIMIT
@@ -176,6 +181,7 @@ ENTRY(arm1026_flush_user_cache_range)
 #endif
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm1026_flush_user_cache_range)
 
 /*
  *	coherent_kern_range(start, end)
@@ -187,8 +193,12 @@ ENTRY(arm1026_flush_user_cache_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm1026_coherent_kern_range)
-	/* FALLTHROUGH */
+SYM_TYPED_FUNC_START(arm1026_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	arm1026_coherent_user_range
+#endif
+SYM_FUNC_END(arm1026_coherent_kern_range)
+
 /*
  *	coherent_user_range(start, end)
  *
@@ -199,7 +209,7 @@ ENTRY(arm1026_coherent_kern_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm1026_coherent_user_range)
+SYM_TYPED_FUNC_START(arm1026_coherent_user_range)
 	mov	ip, #0
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:
@@ -215,6 +225,7 @@ ENTRY(arm1026_coherent_user_range)
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	mov	r0, #0
 	ret	lr
+SYM_FUNC_END(arm1026_coherent_user_range)
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -225,7 +236,7 @@ ENTRY(arm1026_coherent_user_range)
  *	- addr	- kernel address
  *	- size	- region size
  */
-ENTRY(arm1026_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(arm1026_flush_kern_dcache_area)
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	add	r1, r0, r1
@@ -236,6 +247,7 @@ ENTRY(arm1026_flush_kern_dcache_area)
 #endif
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm1026_flush_kern_dcache_area)
 
 /*
  *	dma_inv_range(start, end)
@@ -296,7 +308,7 @@ arm1026_dma_clean_range:
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm1026_dma_flush_range)
+SYM_TYPED_FUNC_START(arm1026_dma_flush_range)
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	bic	r0, r0, #CACHE_DLINESIZE - 1
@@ -307,6 +319,7 @@ ENTRY(arm1026_dma_flush_range)
 #endif
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm1026_dma_flush_range)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -314,13 +327,13 @@ ENTRY(arm1026_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm1026_dma_map_area)
+SYM_TYPED_FUNC_START(arm1026_dma_map_area)
 	add	r1, r1, r0
 	cmp	r2, #DMA_TO_DEVICE
 	beq	arm1026_dma_clean_range
 	bcs	arm1026_dma_inv_range
 	b	arm1026_dma_flush_range
-ENDPROC(arm1026_dma_map_area)
+SYM_FUNC_END(arm1026_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -328,18 +341,12 @@ ENDPROC(arm1026_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm1026_dma_unmap_area)
+SYM_TYPED_FUNC_START(arm1026_dma_unmap_area)
 	ret	lr
-ENDPROC(arm1026_dma_unmap_area)
-
-	.globl	arm1026_flush_kern_cache_louis
-	.equ	arm1026_flush_kern_cache_louis, arm1026_flush_kern_cache_all
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm1026
+SYM_FUNC_END(arm1026_dma_unmap_area)
 
 	.align	5
-ENTRY(cpu_arm1026_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm1026_dcache_clean_area)
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	mov	ip, #0
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
@@ -348,6 +355,7 @@ ENTRY(cpu_arm1026_dcache_clean_area)
 	bhi	1b
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_arm1026_dcache_clean_area)
 
 /* =============================== PageTable ============================== */
 
@@ -359,7 +367,7 @@ ENTRY(cpu_arm1026_dcache_clean_area)
  * pgd: new page tables
  */
 	.align	5
-ENTRY(cpu_arm1026_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm1026_switch_mm)
 #ifdef CONFIG_MMU
 	mov	r1, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
@@ -374,14 +382,15 @@ ENTRY(cpu_arm1026_switch_mm)
 	mcr	p15, 0, r1, c8, c7, 0		@ invalidate I & D TLBs
 #endif
 	ret	lr
-        
+SYM_FUNC_END(cpu_arm1026_switch_mm)
+
 /*
  * cpu_arm1026_set_pte_ext(ptep, pte, ext)
  *
  * Set a PTE and flush it out
  */
 	.align	5
-ENTRY(cpu_arm1026_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_arm1026_set_pte_ext)
 #ifdef CONFIG_MMU
 	armv3_set_pte_ext
 	mov	r0, r0
@@ -390,6 +399,7 @@ ENTRY(cpu_arm1026_set_pte_ext)
 #endif
 #endif /* CONFIG_MMU */
 	ret	lr
+SYM_FUNC_END(cpu_arm1026_set_pte_ext)
 
 	.type	__arm1026_setup, #function
 __arm1026_setup:
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 3b687e6dd9fd..59732c334e1d 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -20,6 +20,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
@@ -35,24 +36,30 @@
  *
  * Notes   : This processor does not require these
  */
-ENTRY(cpu_arm720_dcache_clean_area)
-ENTRY(cpu_arm720_proc_init)
+SYM_TYPED_FUNC_START(cpu_arm720_dcache_clean_area)
 		ret	lr
+SYM_FUNC_END(cpu_arm720_dcache_clean_area)
 
-ENTRY(cpu_arm720_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm720_proc_init)
+		ret	lr
+SYM_FUNC_END(cpu_arm720_proc_init)
+
+SYM_TYPED_FUNC_START(cpu_arm720_proc_fin)
 		mrc	p15, 0, r0, c1, c0, 0
 		bic	r0, r0, #0x1000			@ ...i............
 		bic	r0, r0, #0x000e			@ ............wca.
 		mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 		ret	lr
+SYM_FUNC_END(cpu_arm720_proc_fin)
 
 /*
  * Function: arm720_proc_do_idle(void)
  * Params  : r0 = unused
  * Purpose : put the processor in proper idle mode
  */
-ENTRY(cpu_arm720_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm720_do_idle)
 		ret	lr
+SYM_FUNC_END(cpu_arm720_do_idle)
 
 /*
  * Function: arm720_switch_mm(unsigned long pgd_phys)
@@ -60,7 +67,7 @@ ENTRY(cpu_arm720_do_idle)
  * Purpose : Perform a task switch, saving the old process' state and restoring
  *	     the new.
  */
-ENTRY(cpu_arm720_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm720_switch_mm)
 #ifdef CONFIG_MMU
 		mov	r1, #0
 		mcr	p15, 0, r1, c7, c7, 0		@ invalidate cache
@@ -68,6 +75,7 @@ ENTRY(cpu_arm720_switch_mm)
 		mcr	p15, 0, r1, c8, c7, 0		@ flush TLB (v4)
 #endif
 		ret	lr
+SYM_FUNC_END(cpu_arm720_switch_mm)
 
 /*
  * Function: arm720_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext)
@@ -76,11 +84,12 @@ ENTRY(cpu_arm720_switch_mm)
  * Purpose : Set a PTE and flush it out of any WB cache
  */
 	.align	5
-ENTRY(cpu_arm720_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_arm720_set_pte_ext)
 #ifdef CONFIG_MMU
 	armv3_set_pte_ext wc_disable=0
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_arm720_set_pte_ext)
 
 /*
  * Function: arm720_reset
@@ -88,7 +97,7 @@ ENTRY(cpu_arm720_set_pte_ext)
  * Notes   : This sets up everything for a reset
  */
 		.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm720_reset)
+SYM_TYPED_FUNC_START(cpu_arm720_reset)
 		mov	ip, #0
 		mcr	p15, 0, ip, c7, c7, 0		@ invalidate cache
 #ifdef CONFIG_MMU
@@ -99,7 +108,7 @@ ENTRY(cpu_arm720_reset)
 		bic	ip, ip, #0x2100			@ ..v....s........
 		mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 		ret	r0
-ENDPROC(cpu_arm720_reset)
+SYM_FUNC_END(cpu_arm720_reset)
 		.popsection
 
 	.type	__arm710_setup, #function
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
index f2ec3bc60874..78854df63964 100644
--- a/arch/arm/mm/proc-arm740.S
+++ b/arch/arm/mm/proc-arm740.S
@@ -6,6 +6,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
@@ -24,21 +25,32 @@
  *
  * These are not required.
  */
-ENTRY(cpu_arm740_proc_init)
-ENTRY(cpu_arm740_do_idle)
-ENTRY(cpu_arm740_dcache_clean_area)
-ENTRY(cpu_arm740_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm740_proc_init)
 	ret	lr
+SYM_FUNC_END(cpu_arm740_proc_init)
+
+SYM_TYPED_FUNC_START(cpu_arm740_do_idle)
+	ret	lr
+SYM_FUNC_END(cpu_arm740_do_idle)
+
+SYM_TYPED_FUNC_START(cpu_arm740_dcache_clean_area)
+	ret	lr
+SYM_FUNC_END(cpu_arm740_dcache_clean_area)
+
+SYM_TYPED_FUNC_START(cpu_arm740_switch_mm)
+	ret	lr
+SYM_FUNC_END(cpu_arm740_switch_mm)
 
 /*
  * cpu_arm740_proc_fin()
  */
-ENTRY(cpu_arm740_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm740_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0
 	bic	r0, r0, #0x3f000000		@ bank/f/lock/s
 	bic	r0, r0, #0x0000000c		@ w-buffer/cache
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
+SYM_FUNC_END(cpu_arm740_proc_fin)
 
 /*
  * cpu_arm740_reset(loc)
@@ -46,14 +58,14 @@ ENTRY(cpu_arm740_proc_fin)
  * Notes   : This sets up everything for a reset
  */
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm740_reset)
+SYM_TYPED_FUNC_START(cpu_arm740_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c0, 0		@ invalidate cache
 	mrc	p15, 0, ip, c1, c0, 0		@ get ctrl register
 	bic	ip, ip, #0x0000000c		@ ............wc..
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	ret	r0
-ENDPROC(cpu_arm740_reset)
+SYM_FUNC_END(cpu_arm740_reset)
 	.popsection
 
 	.type	__arm740_setup, #function
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index 01bbe7576c1c..baa3d4472147 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -6,6 +6,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
@@ -23,18 +24,29 @@
  * cpu_arm7tdmi_switch_mm()
  *
  * These are not required.
- */
-ENTRY(cpu_arm7tdmi_proc_init)
-ENTRY(cpu_arm7tdmi_do_idle)
-ENTRY(cpu_arm7tdmi_dcache_clean_area)
-ENTRY(cpu_arm7tdmi_switch_mm)
-		ret	lr
+*/
+SYM_TYPED_FUNC_START(cpu_arm7tdmi_proc_init)
+	ret lr
+SYM_FUNC_END(cpu_arm7tdmi_proc_init)
+
+SYM_TYPED_FUNC_START(cpu_arm7tdmi_do_idle)
+	ret lr
+SYM_FUNC_END(cpu_arm7tdmi_do_idle)
+
+SYM_TYPED_FUNC_START(cpu_arm7tdmi_dcache_clean_area)
+	ret lr
+SYM_FUNC_END(cpu_arm7tdmi_dcache_clean_area)
+
+SYM_TYPED_FUNC_START(cpu_arm7tdmi_switch_mm)
+	ret	lr
+SYM_FUNC_END(cpu_arm7tdmi_switch_mm)
 
 /*
  * cpu_arm7tdmi_proc_fin()
- */
-ENTRY(cpu_arm7tdmi_proc_fin)
-		ret	lr
+*/
+SYM_TYPED_FUNC_START(cpu_arm7tdmi_proc_fin)
+	ret	lr
+SYM_FUNC_END(cpu_arm7tdmi_proc_fin)
 
 /*
  * Function: cpu_arm7tdmi_reset(loc)
@@ -42,9 +54,9 @@ ENTRY(cpu_arm7tdmi_proc_fin)
  * Purpose : Sets up everything for a reset and jump to the location for soft reset.
  */
 		.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm7tdmi_reset)
+SYM_TYPED_FUNC_START(cpu_arm7tdmi_reset)
 		ret	r0
-ENDPROC(cpu_arm7tdmi_reset)
+SYM_FUNC_END(cpu_arm7tdmi_reset)
 		.popsection
 
 		.type	__arm7tdmi_setup, #function
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index a234cd8ba5e6..4727f4b5b6e8 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -13,6 +13,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/hwcap.h>
@@ -48,18 +49,20 @@
 /*
  * cpu_arm920_proc_init()
  */
-ENTRY(cpu_arm920_proc_init)
+SYM_TYPED_FUNC_START(cpu_arm920_proc_init)
 	ret	lr
+SYM_FUNC_END(cpu_arm920_proc_init)
 
 /*
  * cpu_arm920_proc_fin()
  */
-ENTRY(cpu_arm920_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm920_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
+SYM_FUNC_END(cpu_arm920_proc_fin)
 
 /*
  * cpu_arm920_reset(loc)
@@ -72,7 +75,7 @@ ENTRY(cpu_arm920_proc_fin)
  */
 	.align	5
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm920_reset)
+SYM_TYPED_FUNC_START(cpu_arm920_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
@@ -84,17 +87,17 @@ ENTRY(cpu_arm920_reset)
 	bic	ip, ip, #0x1100			@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	ret	r0
-ENDPROC(cpu_arm920_reset)
+SYM_FUNC_END(cpu_arm920_reset)
 	.popsection
 
 /*
  * cpu_arm920_do_idle()
  */
 	.align	5
-ENTRY(cpu_arm920_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm920_do_idle)
 	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
 	ret	lr
-
+SYM_FUNC_END(cpu_arm920_do_idle)
 
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 
@@ -103,11 +106,11 @@ ENTRY(cpu_arm920_do_idle)
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
-ENTRY(arm920_flush_icache_all)
+SYM_TYPED_FUNC_START(arm920_flush_icache_all)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	ret	lr
-ENDPROC(arm920_flush_icache_all)
+SYM_FUNC_END(arm920_flush_icache_all)
 
 /*
  *	flush_user_cache_all()
@@ -115,15 +118,14 @@ ENDPROC(arm920_flush_icache_all)
  *	Invalidate all cache entries in a particular address
  *	space.
  */
-ENTRY(arm920_flush_user_cache_all)
-	/* FALLTHROUGH */
+SYM_FUNC_ALIAS(arm920_flush_user_cache_all, arm920_flush_kern_cache_all)
 
 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
-ENTRY(arm920_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(arm920_flush_kern_cache_all)
 	mov	r2, #VM_EXEC
 	mov	ip, #0
 __flush_whole_cache:
@@ -138,6 +140,7 @@ __flush_whole_cache:
 	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm920_flush_kern_cache_all)
 
 /*
  *	flush_user_cache_range(start, end, flags)
@@ -149,7 +152,7 @@ __flush_whole_cache:
  *	- end	- end address (exclusive)
  *	- flags	- vm_flags for address space
  */
-ENTRY(arm920_flush_user_cache_range)
+SYM_TYPED_FUNC_START(arm920_flush_user_cache_range)
 	mov	ip, #0
 	sub	r3, r1, r0			@ calculate total size
 	cmp	r3, #CACHE_DLIMIT
@@ -164,6 +167,7 @@ ENTRY(arm920_flush_user_cache_range)
 	tst	r2, #VM_EXEC
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm920_flush_user_cache_range)
 
 /*
  *	coherent_kern_range(start, end)
@@ -175,8 +179,11 @@ ENTRY(arm920_flush_user_cache_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm920_coherent_kern_range)
-	/* FALLTHROUGH */
+SYM_TYPED_FUNC_START(arm920_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	arm920_coherent_user_range
+#endif
+SYM_FUNC_END(arm920_coherent_kern_range)
 
 /*
  *	coherent_user_range(start, end)
@@ -188,7 +195,7 @@ ENTRY(arm920_coherent_kern_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm920_coherent_user_range)
+SYM_TYPED_FUNC_START(arm920_coherent_user_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
@@ -198,6 +205,7 @@ ENTRY(arm920_coherent_user_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	r0, #0
 	ret	lr
+SYM_FUNC_END(arm920_coherent_user_range)
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -208,7 +216,7 @@ ENTRY(arm920_coherent_user_range)
  *	- addr	- kernel address
  *	- size	- region size
  */
-ENTRY(arm920_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(arm920_flush_kern_dcache_area)
 	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -218,6 +226,7 @@ ENTRY(arm920_flush_kern_dcache_area)
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm920_flush_kern_dcache_area)
 
 /*
  *	dma_inv_range(start, end)
@@ -272,7 +281,7 @@ arm920_dma_clean_range:
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm920_dma_flush_range)
+SYM_TYPED_FUNC_START(arm920_dma_flush_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -280,6 +289,7 @@ ENTRY(arm920_dma_flush_range)
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm920_dma_flush_range)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -287,13 +297,13 @@ ENTRY(arm920_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm920_dma_map_area)
+SYM_TYPED_FUNC_START(arm920_dma_map_area)
 	add	r1, r1, r0
 	cmp	r2, #DMA_TO_DEVICE
 	beq	arm920_dma_clean_range
 	bcs	arm920_dma_inv_range
 	b	arm920_dma_flush_range
-ENDPROC(arm920_dma_map_area)
+SYM_FUNC_END(arm920_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -301,24 +311,20 @@ ENDPROC(arm920_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm920_dma_unmap_area)
+SYM_TYPED_FUNC_START(arm920_dma_unmap_area)
 	ret	lr
-ENDPROC(arm920_dma_unmap_area)
+SYM_FUNC_END(arm920_dma_unmap_area)
 
-	.globl	arm920_flush_kern_cache_louis
-	.equ	arm920_flush_kern_cache_louis, arm920_flush_kern_cache_all
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm920
-#endif
+#endif /* !CONFIG_CPU_DCACHE_WRITETHROUGH */
 
 
-ENTRY(cpu_arm920_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm920_dcache_clean_area)
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	subs	r1, r1, #CACHE_DLINESIZE
 	bhi	1b
 	ret	lr
+SYM_FUNC_END(cpu_arm920_dcache_clean_area)
 
 /* =============================== PageTable ============================== */
 
@@ -330,7 +336,7 @@ ENTRY(cpu_arm920_dcache_clean_area)
  * pgd: new page tables
  */
 	.align	5
-ENTRY(cpu_arm920_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm920_switch_mm)
 #ifdef CONFIG_MMU
 	mov	ip, #0
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -354,6 +360,7 @@ ENTRY(cpu_arm920_switch_mm)
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_arm920_switch_mm)
 
 /*
  * cpu_arm920_set_pte(ptep, pte, ext)
@@ -361,7 +368,7 @@ ENTRY(cpu_arm920_switch_mm)
  * Set a PTE and flush it out
  */
 	.align	5
-ENTRY(cpu_arm920_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_arm920_set_pte_ext)
 #ifdef CONFIG_MMU
 	armv3_set_pte_ext
 	mov	r0, r0
@@ -369,21 +376,22 @@ ENTRY(cpu_arm920_set_pte_ext)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_arm920_set_pte_ext)
 
 /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
 .globl	cpu_arm920_suspend_size
 .equ	cpu_arm920_suspend_size, 4 * 3
 #ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_arm920_do_suspend)
+SYM_TYPED_FUNC_START(cpu_arm920_do_suspend)
 	stmfd	sp!, {r4 - r6, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ PID
 	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
 	mrc	p15, 0, r6, c1, c0, 0	@ Control register
 	stmia	r0, {r4 - r6}
 	ldmfd	sp!, {r4 - r6, pc}
-ENDPROC(cpu_arm920_do_suspend)
+SYM_FUNC_END(cpu_arm920_do_suspend)
 
-ENTRY(cpu_arm920_do_resume)
+SYM_TYPED_FUNC_START(cpu_arm920_do_resume)
 	mov	ip, #0
 	mcr	p15, 0, ip, c8, c7, 0	@ invalidate I+D TLBs
 	mcr	p15, 0, ip, c7, c7, 0	@ invalidate I+D caches
@@ -393,7 +401,7 @@ ENTRY(cpu_arm920_do_resume)
 	mcr	p15, 0, r1, c2, c0, 0	@ TTB address
 	mov	r0, r6			@ control register
 	b	cpu_resume_mmu
-ENDPROC(cpu_arm920_do_resume)
+SYM_FUNC_END(cpu_arm920_do_resume)
 #endif
 
 	.type	__arm920_setup, #function
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 53c029dcfd83..5a4a3f4f2683 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -14,6 +14,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/hwcap.h>
@@ -50,18 +51,20 @@
 /*
  * cpu_arm922_proc_init()
  */
-ENTRY(cpu_arm922_proc_init)
+SYM_TYPED_FUNC_START(cpu_arm922_proc_init)
 	ret	lr
+SYM_FUNC_END(cpu_arm922_proc_init)
 
 /*
  * cpu_arm922_proc_fin()
  */
-ENTRY(cpu_arm922_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm922_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
+SYM_FUNC_END(cpu_arm922_proc_fin)
 
 /*
  * cpu_arm922_reset(loc)
@@ -74,7 +77,7 @@ ENTRY(cpu_arm922_proc_fin)
  */
 	.align	5
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm922_reset)
+SYM_TYPED_FUNC_START(cpu_arm922_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
@@ -86,17 +89,17 @@ ENTRY(cpu_arm922_reset)
 	bic	ip, ip, #0x1100			@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	ret	r0
-ENDPROC(cpu_arm922_reset)
+SYM_FUNC_END(cpu_arm922_reset)
 	.popsection
 
 /*
  * cpu_arm922_do_idle()
  */
 	.align	5
-ENTRY(cpu_arm922_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm922_do_idle)
 	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
 	ret	lr
-
+SYM_FUNC_END(cpu_arm922_do_idle)
 
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 
@@ -105,11 +108,11 @@ ENTRY(cpu_arm922_do_idle)
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
-ENTRY(arm922_flush_icache_all)
+SYM_TYPED_FUNC_START(arm922_flush_icache_all)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	ret	lr
-ENDPROC(arm922_flush_icache_all)
+SYM_FUNC_END(arm922_flush_icache_all)
 
 /*
  *	flush_user_cache_all()
@@ -117,15 +120,14 @@ ENDPROC(arm922_flush_icache_all)
  *	Clean and invalidate all cache entries in a particular
  *	address space.
  */
-ENTRY(arm922_flush_user_cache_all)
-	/* FALLTHROUGH */
+SYM_FUNC_ALIAS(arm922_flush_user_cache_all, arm922_flush_kern_cache_all)
 
 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
-ENTRY(arm922_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(arm922_flush_kern_cache_all)
 	mov	r2, #VM_EXEC
 	mov	ip, #0
 __flush_whole_cache:
@@ -140,6 +142,7 @@ __flush_whole_cache:
 	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm922_flush_kern_cache_all)
 
 /*
  *	flush_user_cache_range(start, end, flags)
@@ -151,7 +154,7 @@ __flush_whole_cache:
  *	- end	- end address (exclusive)
  *	- flags	- vm_flags describing address space
  */
-ENTRY(arm922_flush_user_cache_range)
+SYM_TYPED_FUNC_START(arm922_flush_user_cache_range)
 	mov	ip, #0
 	sub	r3, r1, r0			@ calculate total size
 	cmp	r3, #CACHE_DLIMIT
@@ -166,6 +169,7 @@ ENTRY(arm922_flush_user_cache_range)
 	tst	r2, #VM_EXEC
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm922_flush_user_cache_range)
 
 /*
  *	coherent_kern_range(start, end)
@@ -177,8 +181,11 @@ ENTRY(arm922_flush_user_cache_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm922_coherent_kern_range)
-	/* FALLTHROUGH */
+SYM_TYPED_FUNC_START(arm922_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	arm922_coherent_user_range
+#endif
+SYM_FUNC_END(arm922_coherent_kern_range)
 
 /*
  *	coherent_user_range(start, end)
@@ -190,7 +197,7 @@ ENTRY(arm922_coherent_kern_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm922_coherent_user_range)
+SYM_TYPED_FUNC_START(arm922_coherent_user_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
@@ -200,6 +207,7 @@ ENTRY(arm922_coherent_user_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	r0, #0
 	ret	lr
+SYM_FUNC_END(arm922_coherent_user_range)
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -210,7 +218,7 @@ ENTRY(arm922_coherent_user_range)
  *	- addr	- kernel address
  *	- size	- region size
  */
-ENTRY(arm922_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(arm922_flush_kern_dcache_area)
 	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -220,6 +228,7 @@ ENTRY(arm922_flush_kern_dcache_area)
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm922_flush_kern_dcache_area)
 
 /*
  *	dma_inv_range(start, end)
@@ -274,7 +283,7 @@ arm922_dma_clean_range:
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm922_dma_flush_range)
+SYM_TYPED_FUNC_START(arm922_dma_flush_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -282,6 +291,7 @@ ENTRY(arm922_dma_flush_range)
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm922_dma_flush_range)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -289,13 +299,13 @@ ENTRY(arm922_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm922_dma_map_area)
+SYM_TYPED_FUNC_START(arm922_dma_map_area)
 	add	r1, r1, r0
 	cmp	r2, #DMA_TO_DEVICE
 	beq	arm922_dma_clean_range
 	bcs	arm922_dma_inv_range
 	b	arm922_dma_flush_range
-ENDPROC(arm922_dma_map_area)
+SYM_FUNC_END(arm922_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -303,19 +313,13 @@ ENDPROC(arm922_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm922_dma_unmap_area)
+SYM_TYPED_FUNC_START(arm922_dma_unmap_area)
 	ret	lr
-ENDPROC(arm922_dma_unmap_area)
-
-	.globl	arm922_flush_kern_cache_louis
-	.equ	arm922_flush_kern_cache_louis, arm922_flush_kern_cache_all
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm922
-#endif
+SYM_FUNC_END(arm922_dma_unmap_area)
 
+#endif /* !CONFIG_CPU_DCACHE_WRITETHROUGH */
 
-ENTRY(cpu_arm922_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm922_dcache_clean_area)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -323,6 +327,7 @@ ENTRY(cpu_arm922_dcache_clean_area)
 	bhi	1b
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_arm922_dcache_clean_area)
 
 /* =============================== PageTable ============================== */
 
@@ -334,7 +339,7 @@ ENTRY(cpu_arm922_dcache_clean_area)
  * pgd: new page tables
  */
 	.align	5
-ENTRY(cpu_arm922_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm922_switch_mm)
 #ifdef CONFIG_MMU
 	mov	ip, #0
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -358,6 +363,7 @@ ENTRY(cpu_arm922_switch_mm)
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_arm922_switch_mm)
 
 /*
  * cpu_arm922_set_pte_ext(ptep, pte, ext)
@@ -365,7 +371,7 @@ ENTRY(cpu_arm922_switch_mm)
  * Set a PTE and flush it out
  */
 	.align	5
-ENTRY(cpu_arm922_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_arm922_set_pte_ext)
 #ifdef CONFIG_MMU
 	armv3_set_pte_ext
 	mov	r0, r0
@@ -373,6 +379,7 @@ ENTRY(cpu_arm922_set_pte_ext)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 #endif /* CONFIG_MMU */
 	ret	lr
+SYM_FUNC_END(cpu_arm922_set_pte_ext)
 
 	.type	__arm922_setup, #function
 __arm922_setup:
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 0bfad62ea858..1c4830afe1d3 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -37,6 +37,7 @@
 
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/hwcap.h>
@@ -71,18 +72,20 @@
 /*
  * cpu_arm925_proc_init()
  */
-ENTRY(cpu_arm925_proc_init)
+SYM_TYPED_FUNC_START(cpu_arm925_proc_init)
 	ret	lr
+SYM_FUNC_END(cpu_arm925_proc_init)
 
 /*
  * cpu_arm925_proc_fin()
  */
-ENTRY(cpu_arm925_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm925_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
+SYM_FUNC_END(cpu_arm925_proc_fin)
 
 /*
  * cpu_arm925_reset(loc)
@@ -95,14 +98,14 @@ ENTRY(cpu_arm925_proc_fin)
  */
 	.align	5
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm925_reset)
+SYM_TYPED_FUNC_START(cpu_arm925_reset)
 	/* Send software reset to MPU and DSP */
 	mov	ip, #0xff000000
 	orr	ip, ip, #0x00fe0000
 	orr	ip, ip, #0x0000ce00
 	mov	r4, #1
 	strh	r4, [ip, #0x10]
-ENDPROC(cpu_arm925_reset)
+SYM_FUNC_END(cpu_arm925_reset)
 	.popsection
 
 	mov	ip, #0
@@ -123,7 +126,7 @@ ENDPROC(cpu_arm925_reset)
  * Called with IRQs disabled
  */
 	.align	10
-ENTRY(cpu_arm925_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm925_do_idle)
 	mov	r0, #0
 	mrc	p15, 0, r1, c1, c0, 0		@ Read control register
 	mcr	p15, 0, r0, c7, c10, 4		@ Drain write buffer
@@ -132,17 +135,18 @@ ENTRY(cpu_arm925_do_idle)
 	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
 	mcr	p15, 0, r1, c1, c0, 0		@ Restore ICache enable
 	ret	lr
+SYM_FUNC_END(cpu_arm925_do_idle)
 
 /*
  *	flush_icache_all()
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
-ENTRY(arm925_flush_icache_all)
+SYM_TYPED_FUNC_START(arm925_flush_icache_all)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	ret	lr
-ENDPROC(arm925_flush_icache_all)
+SYM_FUNC_END(arm925_flush_icache_all)
 
 /*
  *	flush_user_cache_all()
@@ -150,15 +154,14 @@ ENDPROC(arm925_flush_icache_all)
  *	Clean and invalidate all cache entries in a particular
  *	address space.
  */
-ENTRY(arm925_flush_user_cache_all)
-	/* FALLTHROUGH */
+SYM_FUNC_ALIAS(arm925_flush_user_cache_all, arm925_flush_kern_cache_all)
 
 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
-ENTRY(arm925_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(arm925_flush_kern_cache_all)
 	mov	r2, #VM_EXEC
 	mov	ip, #0
 __flush_whole_cache:
@@ -175,6 +178,7 @@ __flush_whole_cache:
 	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm925_flush_kern_cache_all)
 
 /*
  *	flush_user_cache_range(start, end, flags)
@@ -186,7 +190,7 @@ __flush_whole_cache:
  *	- end	- end address (exclusive)
  *	- flags	- vm_flags describing address space
  */
-ENTRY(arm925_flush_user_cache_range)
+SYM_TYPED_FUNC_START(arm925_flush_user_cache_range)
 	mov	ip, #0
 	sub	r3, r1, r0			@ calculate total size
 	cmp	r3, #CACHE_DLIMIT
@@ -212,6 +216,7 @@ ENTRY(arm925_flush_user_cache_range)
 	tst	r2, #VM_EXEC
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm925_flush_user_cache_range)
 
 /*
  *	coherent_kern_range(start, end)
@@ -223,8 +228,11 @@ ENTRY(arm925_flush_user_cache_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm925_coherent_kern_range)
-	/* FALLTHROUGH */
+SYM_TYPED_FUNC_START(arm925_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	arm925_coherent_user_range
+#endif
+SYM_FUNC_END(arm925_coherent_kern_range)
 
 /*
  *	coherent_user_range(start, end)
@@ -236,7 +244,7 @@ ENTRY(arm925_coherent_kern_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm925_coherent_user_range)
+SYM_TYPED_FUNC_START(arm925_coherent_user_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
@@ -246,6 +254,7 @@ ENTRY(arm925_coherent_user_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	r0, #0
 	ret	lr
+SYM_FUNC_END(arm925_coherent_user_range)
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -256,7 +265,7 @@ ENTRY(arm925_coherent_user_range)
  *	- addr	- kernel address
  *	- size	- region size
  */
-ENTRY(arm925_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(arm925_flush_kern_dcache_area)
 	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -266,6 +275,7 @@ ENTRY(arm925_flush_kern_dcache_area)
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm925_flush_kern_dcache_area)
 
 /*
  *	dma_inv_range(start, end)
@@ -324,7 +334,7 @@ arm925_dma_clean_range:
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm925_dma_flush_range)
+SYM_TYPED_FUNC_START(arm925_dma_flush_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -337,6 +347,7 @@ ENTRY(arm925_dma_flush_range)
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm925_dma_flush_range)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -344,13 +355,13 @@ ENTRY(arm925_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm925_dma_map_area)
+SYM_TYPED_FUNC_START(arm925_dma_map_area)
 	add	r1, r1, r0
 	cmp	r2, #DMA_TO_DEVICE
 	beq	arm925_dma_clean_range
 	bcs	arm925_dma_inv_range
 	b	arm925_dma_flush_range
-ENDPROC(arm925_dma_map_area)
+SYM_FUNC_END(arm925_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -358,17 +369,11 @@ ENDPROC(arm925_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm925_dma_unmap_area)
+SYM_TYPED_FUNC_START(arm925_dma_unmap_area)
 	ret	lr
-ENDPROC(arm925_dma_unmap_area)
-
-	.globl	arm925_flush_kern_cache_louis
-	.equ	arm925_flush_kern_cache_louis, arm925_flush_kern_cache_all
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm925
+SYM_FUNC_END(arm925_dma_unmap_area)
 
-ENTRY(cpu_arm925_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm925_dcache_clean_area)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -377,6 +382,7 @@ ENTRY(cpu_arm925_dcache_clean_area)
 #endif
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(cpu_arm925_dcache_clean_area)
 
 /* =============================== PageTable ============================== */
 
@@ -388,7 +394,7 @@ ENTRY(cpu_arm925_dcache_clean_area)
  * pgd: new page tables
  */
 	.align	5
-ENTRY(cpu_arm925_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm925_switch_mm)
 #ifdef CONFIG_MMU
 	mov	ip, #0
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -406,6 +412,7 @@ ENTRY(cpu_arm925_switch_mm)
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_arm925_switch_mm)
 
 /*
  * cpu_arm925_set_pte_ext(ptep, pte, ext)
@@ -413,7 +420,7 @@ ENTRY(cpu_arm925_switch_mm)
  * Set a PTE and flush it out
  */
 	.align	5
-ENTRY(cpu_arm925_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_arm925_set_pte_ext)
 #ifdef CONFIG_MMU
 	armv3_set_pte_ext
 	mov	r0, r0
@@ -423,6 +430,7 @@ ENTRY(cpu_arm925_set_pte_ext)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 #endif /* CONFIG_MMU */
 	ret	lr
+SYM_FUNC_END(cpu_arm925_set_pte_ext)
 
 	.type	__arm925_setup, #function
 __arm925_setup:
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 0487a2c3439b..a09cc3e02efd 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -13,6 +13,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/hwcap.h>
@@ -40,18 +41,20 @@
 /*
  * cpu_arm926_proc_init()
  */
-ENTRY(cpu_arm926_proc_init)
+SYM_TYPED_FUNC_START(cpu_arm926_proc_init)
 	ret	lr
+SYM_FUNC_END(cpu_arm926_proc_init)
 
 /*
  * cpu_arm926_proc_fin()
  */
-ENTRY(cpu_arm926_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm926_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
+SYM_FUNC_END(cpu_arm926_proc_fin)
 
 /*
  * cpu_arm926_reset(loc)
@@ -64,7 +67,7 @@ ENTRY(cpu_arm926_proc_fin)
  */
 	.align	5
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm926_reset)
+SYM_TYPED_FUNC_START(cpu_arm926_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
@@ -76,7 +79,7 @@ ENTRY(cpu_arm926_reset)
 	bic	ip, ip, #0x1100			@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	ret	r0
-ENDPROC(cpu_arm926_reset)
+SYM_FUNC_END(cpu_arm926_reset)
 	.popsection
 
 /*
@@ -85,7 +88,7 @@ ENDPROC(cpu_arm926_reset)
  * Called with IRQs disabled
  */
 	.align	10
-ENTRY(cpu_arm926_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm926_do_idle)
 	mov	r0, #0
 	mrc	p15, 0, r1, c1, c0, 0		@ Read control register
 	mcr	p15, 0, r0, c7, c10, 4		@ Drain write buffer
@@ -98,17 +101,18 @@ ENTRY(cpu_arm926_do_idle)
 	mcr	p15, 0, r1, c1, c0, 0		@ Restore ICache enable
 	msr	cpsr_c, r3			@ Restore FIQ state
 	ret	lr
+SYM_FUNC_END(cpu_arm926_do_idle)
 
 /*
  *	flush_icache_all()
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
-ENTRY(arm926_flush_icache_all)
+SYM_TYPED_FUNC_START(arm926_flush_icache_all)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	ret	lr
-ENDPROC(arm926_flush_icache_all)
+SYM_FUNC_END(arm926_flush_icache_all)
 
 /*
  *	flush_user_cache_all()
@@ -116,15 +120,14 @@ ENDPROC(arm926_flush_icache_all)
  *	Clean and invalidate all cache entries in a particular
  *	address space.
  */
-ENTRY(arm926_flush_user_cache_all)
-	/* FALLTHROUGH */
+SYM_FUNC_ALIAS(arm926_flush_user_cache_all, arm926_flush_kern_cache_all)
 
 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
-ENTRY(arm926_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(arm926_flush_kern_cache_all)
 	mov	r2, #VM_EXEC
 	mov	ip, #0
 __flush_whole_cache:
@@ -138,6 +141,7 @@ __flush_whole_cache:
 	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm926_flush_kern_cache_all)
 
 /*
  *	flush_user_cache_range(start, end, flags)
@@ -149,7 +153,7 @@ __flush_whole_cache:
  *	- end	- end address (exclusive)
  *	- flags	- vm_flags describing address space
  */
-ENTRY(arm926_flush_user_cache_range)
+SYM_TYPED_FUNC_START(arm926_flush_user_cache_range)
 	mov	ip, #0
 	sub	r3, r1, r0			@ calculate total size
 	cmp	r3, #CACHE_DLIMIT
@@ -175,6 +179,7 @@ ENTRY(arm926_flush_user_cache_range)
 	tst	r2, #VM_EXEC
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm926_flush_user_cache_range)
 
 /*
  *	coherent_kern_range(start, end)
@@ -186,8 +191,11 @@ ENTRY(arm926_flush_user_cache_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm926_coherent_kern_range)
-	/* FALLTHROUGH */
+SYM_TYPED_FUNC_START(arm926_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	arm926_coherent_user_range
+#endif
+SYM_FUNC_END(arm926_coherent_kern_range)
 
 /*
  *	coherent_user_range(start, end)
@@ -199,7 +207,7 @@ ENTRY(arm926_coherent_kern_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm926_coherent_user_range)
+SYM_TYPED_FUNC_START(arm926_coherent_user_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
@@ -209,6 +217,7 @@ ENTRY(arm926_coherent_user_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	r0, #0
 	ret	lr
+SYM_FUNC_END(arm926_coherent_user_range)
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -219,7 +228,7 @@ ENTRY(arm926_coherent_user_range)
  *	- addr	- kernel address
  *	- size	- region size
  */
-ENTRY(arm926_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(arm926_flush_kern_dcache_area)
 	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -229,6 +238,7 @@ ENTRY(arm926_flush_kern_dcache_area)
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm926_flush_kern_dcache_area)
 
 /*
  *	dma_inv_range(start, end)
@@ -287,7 +297,7 @@ arm926_dma_clean_range:
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm926_dma_flush_range)
+SYM_TYPED_FUNC_START(arm926_dma_flush_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -300,6 +310,7 @@ ENTRY(arm926_dma_flush_range)
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm926_dma_flush_range)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -307,13 +318,13 @@ ENTRY(arm926_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm926_dma_map_area)
+SYM_TYPED_FUNC_START(arm926_dma_map_area)
 	add	r1, r1, r0
 	cmp	r2, #DMA_TO_DEVICE
 	beq	arm926_dma_clean_range
 	bcs	arm926_dma_inv_range
 	b	arm926_dma_flush_range
-ENDPROC(arm926_dma_map_area)
+SYM_FUNC_END(arm926_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -321,17 +332,11 @@ ENDPROC(arm926_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm926_dma_unmap_area)
+SYM_TYPED_FUNC_START(arm926_dma_unmap_area)
 	ret	lr
-ENDPROC(arm926_dma_unmap_area)
-
-	.globl	arm926_flush_kern_cache_louis
-	.equ	arm926_flush_kern_cache_louis, arm926_flush_kern_cache_all
+SYM_FUNC_END(arm926_dma_unmap_area)
 
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm926
-
-ENTRY(cpu_arm926_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm926_dcache_clean_area)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -340,6 +345,7 @@ ENTRY(cpu_arm926_dcache_clean_area)
 #endif
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(cpu_arm926_dcache_clean_area)
 
 /* =============================== PageTable ============================== */
 
@@ -351,7 +357,8 @@ ENTRY(cpu_arm926_dcache_clean_area)
  * pgd: new page tables
  */
 	.align	5
-ENTRY(cpu_arm926_switch_mm)
+
+SYM_TYPED_FUNC_START(cpu_arm926_switch_mm)
 #ifdef CONFIG_MMU
 	mov	ip, #0
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -367,6 +374,7 @@ ENTRY(cpu_arm926_switch_mm)
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_arm926_switch_mm)
 
 /*
  * cpu_arm926_set_pte_ext(ptep, pte, ext)
@@ -374,7 +382,7 @@ ENTRY(cpu_arm926_switch_mm)
  * Set a PTE and flush it out
  */
 	.align	5
-ENTRY(cpu_arm926_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_arm926_set_pte_ext)
 #ifdef CONFIG_MMU
 	armv3_set_pte_ext
 	mov	r0, r0
@@ -384,21 +392,22 @@ ENTRY(cpu_arm926_set_pte_ext)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_arm926_set_pte_ext)
 
 /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
 .globl	cpu_arm926_suspend_size
 .equ	cpu_arm926_suspend_size, 4 * 3
 #ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_arm926_do_suspend)
+SYM_TYPED_FUNC_START(cpu_arm926_do_suspend)
 	stmfd	sp!, {r4 - r6, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ PID
 	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
 	mrc	p15, 0, r6, c1, c0, 0	@ Control register
 	stmia	r0, {r4 - r6}
 	ldmfd	sp!, {r4 - r6, pc}
-ENDPROC(cpu_arm926_do_suspend)
+SYM_FUNC_END(cpu_arm926_do_suspend)
 
-ENTRY(cpu_arm926_do_resume)
+SYM_TYPED_FUNC_START(cpu_arm926_do_resume)
 	mov	ip, #0
 	mcr	p15, 0, ip, c8, c7, 0	@ invalidate I+D TLBs
 	mcr	p15, 0, ip, c7, c7, 0	@ invalidate I+D caches
@@ -408,7 +417,7 @@ ENTRY(cpu_arm926_do_resume)
 	mcr	p15, 0, r1, c2, c0, 0	@ TTB address
 	mov	r0, r6			@ control register
 	b	cpu_resume_mmu
-ENDPROC(cpu_arm926_do_resume)
+SYM_FUNC_END(cpu_arm926_do_resume)
 #endif
 
 	.type	__arm926_setup, #function
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index cf9bfcc825ca..545c076c36d2 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -6,6 +6,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/hwcap.h>
@@ -25,19 +26,24 @@
  *
  * These are not required.
  */
-ENTRY(cpu_arm940_proc_init)
-ENTRY(cpu_arm940_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm940_proc_init)
 	ret	lr
+SYM_FUNC_END(cpu_arm940_proc_init)
+
+SYM_TYPED_FUNC_START(cpu_arm940_switch_mm)
+	ret	lr
+SYM_FUNC_END(cpu_arm940_switch_mm)
 
 /*
  * cpu_arm940_proc_fin()
  */
-ENTRY(cpu_arm940_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm940_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x00001000		@ i-cache
 	bic	r0, r0, #0x00000004		@ d-cache
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
+SYM_FUNC_END(cpu_arm940_proc_fin)
 
 /*
  * cpu_arm940_reset(loc)
@@ -45,7 +51,7 @@ ENTRY(cpu_arm940_proc_fin)
  * Notes   : This sets up everything for a reset
  */
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm940_reset)
+SYM_TYPED_FUNC_START(cpu_arm940_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c5, 0		@ flush I cache
 	mcr	p15, 0, ip, c7, c6, 0		@ flush D cache
@@ -55,42 +61,43 @@ ENTRY(cpu_arm940_reset)
 	bic	ip, ip, #0x00001000		@ i-cache
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	ret	r0
-ENDPROC(cpu_arm940_reset)
+SYM_FUNC_END(cpu_arm940_reset)
 	.popsection
 
 /*
  * cpu_arm940_do_idle()
  */
 	.align	5
-ENTRY(cpu_arm940_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm940_do_idle)
 	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
 	ret	lr
+SYM_FUNC_END(cpu_arm940_do_idle)
 
 /*
  *	flush_icache_all()
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
-ENTRY(arm940_flush_icache_all)
+SYM_TYPED_FUNC_START(arm940_flush_icache_all)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	ret	lr
-ENDPROC(arm940_flush_icache_all)
+SYM_FUNC_END(arm940_flush_icache_all)
 
 /*
  *	flush_user_cache_all()
  */
-ENTRY(arm940_flush_user_cache_all)
-	/* FALLTHROUGH */
+SYM_FUNC_ALIAS(arm940_flush_user_cache_all, arm940_flush_kern_cache_all)
 
 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
-ENTRY(arm940_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(arm940_flush_kern_cache_all)
 	mov	r2, #VM_EXEC
-	/* FALLTHROUGH */
+	b	arm940_flush_user_cache_range
+SYM_FUNC_END(arm940_flush_kern_cache_all)
 
 /*
  *	flush_user_cache_range(start, end, flags)
@@ -102,7 +109,7 @@ ENTRY(arm940_flush_kern_cache_all)
  *	- end	- end address (exclusive)
  *	- flags	- vm_flags describing address space
  */
-ENTRY(arm940_flush_user_cache_range)
+SYM_TYPED_FUNC_START(arm940_flush_user_cache_range)
 	mov	ip, #0
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, ip, c7, c6, 0		@ flush D cache
@@ -119,6 +126,7 @@ ENTRY(arm940_flush_user_cache_range)
 	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm940_flush_user_cache_range)
 
 /*
  *	coherent_kern_range(start, end)
@@ -130,8 +138,9 @@ ENTRY(arm940_flush_user_cache_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm940_coherent_kern_range)
-	/* FALLTHROUGH */
+SYM_TYPED_FUNC_START(arm940_coherent_kern_range)
+	b	arm940_flush_kern_dcache_area
+SYM_FUNC_END(arm940_coherent_kern_range)
 
 /*
  *	coherent_user_range(start, end)
@@ -143,8 +152,11 @@ ENTRY(arm940_coherent_kern_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm940_coherent_user_range)
-	/* FALLTHROUGH */
+SYM_TYPED_FUNC_START(arm940_coherent_user_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	arm940_flush_kern_dcache_area
+#endif
+SYM_FUNC_END(arm940_coherent_user_range)
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -155,7 +167,7 @@ ENTRY(arm940_coherent_user_range)
  *	- addr	- kernel address
  *	- size	- region size
  */
-ENTRY(arm940_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(arm940_flush_kern_dcache_area)
 	mov	r0, #0
 	mov	r1, #(CACHE_DSEGMENTS - 1) << 4	@ 4 segments
 1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
@@ -167,6 +179,7 @@ ENTRY(arm940_flush_kern_dcache_area)
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm940_flush_kern_dcache_area)
 
 /*
  *	dma_inv_range(start, end)
@@ -199,7 +212,7 @@ arm940_dma_inv_range:
  *	- end	- virtual end address
  */
 arm940_dma_clean_range:
-ENTRY(cpu_arm940_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm940_dcache_clean_area)
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mov	r1, #(CACHE_DSEGMENTS - 1) << 4	@ 4 segments
@@ -212,6 +225,7 @@ ENTRY(cpu_arm940_dcache_clean_area)
 #endif
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(cpu_arm940_dcache_clean_area)
 
 /*
  *	dma_flush_range(start, end)
@@ -222,7 +236,7 @@ ENTRY(cpu_arm940_dcache_clean_area)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm940_dma_flush_range)
+SYM_TYPED_FUNC_START(arm940_dma_flush_range)
 	mov	ip, #0
 	mov	r1, #(CACHE_DSEGMENTS - 1) << 4	@ 4 segments
 1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
@@ -238,6 +252,7 @@ ENTRY(arm940_dma_flush_range)
 	bcs	1b				@ segments 7 to 0
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm940_dma_flush_range)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -245,13 +260,13 @@ ENTRY(arm940_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm940_dma_map_area)
+SYM_TYPED_FUNC_START(arm940_dma_map_area)
 	add	r1, r1, r0
 	cmp	r2, #DMA_TO_DEVICE
 	beq	arm940_dma_clean_range
 	bcs	arm940_dma_inv_range
 	b	arm940_dma_flush_range
-ENDPROC(arm940_dma_map_area)
+SYM_FUNC_END(arm940_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -259,15 +274,9 @@ ENDPROC(arm940_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm940_dma_unmap_area)
+SYM_TYPED_FUNC_START(arm940_dma_unmap_area)
 	ret	lr
-ENDPROC(arm940_dma_unmap_area)
-
-	.globl	arm940_flush_kern_cache_louis
-	.equ	arm940_flush_kern_cache_louis, arm940_flush_kern_cache_all
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm940
+SYM_FUNC_END(arm940_dma_unmap_area)
 
 	.type	__arm940_setup, #function
 __arm940_setup:
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 6fb3898ad1cd..f3d4e18c3fba 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -8,6 +8,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/hwcap.h>
@@ -32,19 +33,24 @@
  *
  * These are not required.
  */
-ENTRY(cpu_arm946_proc_init)
-ENTRY(cpu_arm946_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm946_proc_init)
 	ret	lr
+SYM_FUNC_END(cpu_arm946_proc_init)
+
+SYM_TYPED_FUNC_START(cpu_arm946_switch_mm)
+	ret	lr
+SYM_FUNC_END(cpu_arm946_switch_mm)
 
 /*
  * cpu_arm946_proc_fin()
  */
-ENTRY(cpu_arm946_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm946_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x00001000		@ i-cache
 	bic	r0, r0, #0x00000004		@ d-cache
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
+SYM_FUNC_END(cpu_arm946_proc_fin)
 
 /*
  * cpu_arm946_reset(loc)
@@ -52,7 +58,7 @@ ENTRY(cpu_arm946_proc_fin)
  * Notes   : This sets up everything for a reset
  */
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm946_reset)
+SYM_TYPED_FUNC_START(cpu_arm946_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c5, 0		@ flush I cache
 	mcr	p15, 0, ip, c7, c6, 0		@ flush D cache
@@ -62,40 +68,40 @@ ENTRY(cpu_arm946_reset)
 	bic	ip, ip, #0x00001000		@ i-cache
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	ret	r0
-ENDPROC(cpu_arm946_reset)
+SYM_FUNC_END(cpu_arm946_reset)
 	.popsection
 
 /*
  * cpu_arm946_do_idle()
  */
 	.align	5
-ENTRY(cpu_arm946_do_idle)
+SYM_TYPED_FUNC_START(cpu_arm946_do_idle)
 	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
 	ret	lr
+SYM_FUNC_END(cpu_arm946_do_idle)
 
 /*
  *	flush_icache_all()
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
-ENTRY(arm946_flush_icache_all)
+SYM_TYPED_FUNC_START(arm946_flush_icache_all)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	ret	lr
-ENDPROC(arm946_flush_icache_all)
+SYM_FUNC_END(arm946_flush_icache_all)
 
 /*
  *	flush_user_cache_all()
  */
-ENTRY(arm946_flush_user_cache_all)
-	/* FALLTHROUGH */
+SYM_FUNC_ALIAS(arm946_flush_user_cache_all, arm946_flush_kern_cache_all)
 
 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
-ENTRY(arm946_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(arm946_flush_kern_cache_all)
 	mov	r2, #VM_EXEC
 	mov	ip, #0
 __flush_whole_cache:
@@ -114,6 +120,7 @@ __flush_whole_cache:
 	mcrne	p15, 0, ip, c7, c5, 0		@ flush I cache
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm946_flush_kern_cache_all)
 
 /*
  *	flush_user_cache_range(start, end, flags)
@@ -126,7 +133,7 @@ __flush_whole_cache:
  *	- flags	- vm_flags describing address space
  * (same as arm926)
  */
-ENTRY(arm946_flush_user_cache_range)
+SYM_TYPED_FUNC_START(arm946_flush_user_cache_range)
 	mov	ip, #0
 	sub	r3, r1, r0			@ calculate total size
 	cmp	r3, #CACHE_DLIMIT
@@ -153,6 +160,7 @@ ENTRY(arm946_flush_user_cache_range)
 	tst	r2, #VM_EXEC
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm946_flush_user_cache_range)
 
 /*
  *	coherent_kern_range(start, end)
@@ -164,8 +172,11 @@ ENTRY(arm946_flush_user_cache_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm946_coherent_kern_range)
-	/* FALLTHROUGH */
+SYM_TYPED_FUNC_START(arm946_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	arm946_coherent_user_range
+#endif
+SYM_FUNC_END(arm946_coherent_kern_range)
 
 /*
  *	coherent_user_range(start, end)
@@ -178,7 +189,7 @@ ENTRY(arm946_coherent_kern_range)
  *	- end	- virtual end address
  * (same as arm926)
  */
-ENTRY(arm946_coherent_user_range)
+SYM_TYPED_FUNC_START(arm946_coherent_user_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
@@ -188,6 +199,7 @@ ENTRY(arm946_coherent_user_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	r0, #0
 	ret	lr
+SYM_FUNC_END(arm946_coherent_user_range)
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -199,7 +211,7 @@ ENTRY(arm946_coherent_user_range)
  *	- size	- region size
  * (same as arm926)
  */
-ENTRY(arm946_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(arm946_flush_kern_dcache_area)
 	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -209,6 +221,7 @@ ENTRY(arm946_flush_kern_dcache_area)
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm946_flush_kern_dcache_area)
 
 /*
  *	dma_inv_range(start, end)
@@ -268,7 +281,7 @@ arm946_dma_clean_range:
  *
  * (same as arm926)
  */
-ENTRY(arm946_dma_flush_range)
+SYM_TYPED_FUNC_START(arm946_dma_flush_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -281,6 +294,7 @@ ENTRY(arm946_dma_flush_range)
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(arm946_dma_flush_range)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -288,13 +302,13 @@ ENTRY(arm946_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm946_dma_map_area)
+SYM_TYPED_FUNC_START(arm946_dma_map_area)
 	add	r1, r1, r0
 	cmp	r2, #DMA_TO_DEVICE
 	beq	arm946_dma_clean_range
 	bcs	arm946_dma_inv_range
 	b	arm946_dma_flush_range
-ENDPROC(arm946_dma_map_area)
+SYM_FUNC_END(arm946_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -302,17 +316,11 @@ ENDPROC(arm946_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(arm946_dma_unmap_area)
+SYM_TYPED_FUNC_START(arm946_dma_unmap_area)
 	ret	lr
-ENDPROC(arm946_dma_unmap_area)
-
-	.globl	arm946_flush_kern_cache_louis
-	.equ	arm946_flush_kern_cache_louis, arm946_flush_kern_cache_all
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm946
+SYM_FUNC_END(arm946_dma_unmap_area)
 
-ENTRY(cpu_arm946_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_arm946_dcache_clean_area)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -321,6 +329,7 @@ ENTRY(cpu_arm946_dcache_clean_area)
 #endif
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(cpu_arm946_dcache_clean_area)
 
 	.type	__arm946_setup, #function
 __arm946_setup:
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index a054c0e9c034..c480a8400eff 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -6,6 +6,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
@@ -24,17 +25,28 @@
  *
  * These are not required.
  */
-ENTRY(cpu_arm9tdmi_proc_init)
-ENTRY(cpu_arm9tdmi_do_idle)
-ENTRY(cpu_arm9tdmi_dcache_clean_area)
-ENTRY(cpu_arm9tdmi_switch_mm)
+SYM_TYPED_FUNC_START(cpu_arm9tdmi_proc_init)
 		ret	lr
+SYM_FUNC_END(cpu_arm9tdmi_proc_init)
+
+SYM_TYPED_FUNC_START(cpu_arm9tdmi_do_idle)
+		ret	lr
+SYM_FUNC_END(cpu_arm9tdmi_do_idle)
+
+SYM_TYPED_FUNC_START(cpu_arm9tdmi_dcache_clean_area)
+		ret	lr
+SYM_FUNC_END(cpu_arm9tdmi_dcache_clean_area)
+
+SYM_TYPED_FUNC_START(cpu_arm9tdmi_switch_mm)
+		ret	lr
+SYM_FUNC_END(cpu_arm9tdmi_switch_mm)
 
 /*
  * cpu_arm9tdmi_proc_fin()
  */
-ENTRY(cpu_arm9tdmi_proc_fin)
+SYM_TYPED_FUNC_START(cpu_arm9tdmi_proc_fin)
 		ret	lr
+SYM_FUNC_END(cpu_arm9tdmi_proc_fin)
 
 /*
  * Function: cpu_arm9tdmi_reset(loc)
@@ -42,9 +54,9 @@ ENTRY(cpu_arm9tdmi_proc_fin)
  * Purpose : Sets up everything for a reset and jump to the location for soft reset.
  */
 		.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm9tdmi_reset)
+SYM_TYPED_FUNC_START(cpu_arm9tdmi_reset)
 		ret	r0
-ENDPROC(cpu_arm9tdmi_reset)
+SYM_FUNC_END(cpu_arm9tdmi_reset)
 		.popsection
 
 		.type	__arm9tdmi_setup, #function
diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
index 2c73e0d47d08..7c16ccac8a05 100644
--- a/arch/arm/mm/proc-fa526.S
+++ b/arch/arm/mm/proc-fa526.S
@@ -11,6 +11,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/hwcap.h>
@@ -26,13 +27,14 @@
 /*
  * cpu_fa526_proc_init()
  */
-ENTRY(cpu_fa526_proc_init)
+SYM_TYPED_FUNC_START(cpu_fa526_proc_init)
 	ret	lr
+SYM_FUNC_END(cpu_fa526_proc_init)
 
 /*
  * cpu_fa526_proc_fin()
  */
-ENTRY(cpu_fa526_proc_fin)
+SYM_TYPED_FUNC_START(cpu_fa526_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
@@ -40,6 +42,7 @@ ENTRY(cpu_fa526_proc_fin)
 	nop
 	nop
 	ret	lr
+SYM_FUNC_END(cpu_fa526_proc_fin)
 
 /*
  * cpu_fa526_reset(loc)
@@ -52,7 +55,7 @@ ENTRY(cpu_fa526_proc_fin)
  */
 	.align	4
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_fa526_reset)
+SYM_TYPED_FUNC_START(cpu_fa526_reset)
 /* TODO: Use CP8 if possible... */
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
@@ -68,24 +71,25 @@ ENTRY(cpu_fa526_reset)
 	nop
 	nop
 	ret	r0
-ENDPROC(cpu_fa526_reset)
+SYM_FUNC_END(cpu_fa526_reset)
 	.popsection
 
 /*
  * cpu_fa526_do_idle()
  */
 	.align	4
-ENTRY(cpu_fa526_do_idle)
+SYM_TYPED_FUNC_START(cpu_fa526_do_idle)
 	ret	lr
+SYM_FUNC_END(cpu_fa526_do_idle)
 
-
-ENTRY(cpu_fa526_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_fa526_dcache_clean_area)
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	subs	r1, r1, #CACHE_DLINESIZE
 	bhi	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(cpu_fa526_dcache_clean_area)
 
 /* =============================== PageTable ============================== */
 
@@ -97,7 +101,7 @@ ENTRY(cpu_fa526_dcache_clean_area)
  * pgd: new page tables
  */
 	.align	4
-ENTRY(cpu_fa526_switch_mm)
+SYM_TYPED_FUNC_START(cpu_fa526_switch_mm)
 #ifdef CONFIG_MMU
 	mov	ip, #0
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -113,6 +117,7 @@ ENTRY(cpu_fa526_switch_mm)
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate UTLB
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_fa526_switch_mm)
 
 /*
  * cpu_fa526_set_pte_ext(ptep, pte, ext)
@@ -120,7 +125,7 @@ ENTRY(cpu_fa526_switch_mm)
  * Set a PTE and flush it out
  */
 	.align	4
-ENTRY(cpu_fa526_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_fa526_set_pte_ext)
 #ifdef CONFIG_MMU
 	armv3_set_pte_ext
 	mov	r0, r0
@@ -129,6 +134,7 @@ ENTRY(cpu_fa526_set_pte_ext)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_fa526_set_pte_ext)
 
 	.type	__fa526_setup, #function
 __fa526_setup:
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index 61ce82aca6f0..7f08d06c9625 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -8,6 +8,7 @@
 
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/hwcap.h>
@@ -43,7 +44,7 @@ __cache_params:
 /*
  * cpu_feroceon_proc_init()
  */
-ENTRY(cpu_feroceon_proc_init)
+SYM_TYPED_FUNC_START(cpu_feroceon_proc_init)
 	mrc	p15, 0, r0, c0, c0, 1		@ read cache type register
 	ldr	r1, __cache_params
 	mov	r2, #(16 << 5)
@@ -56,12 +57,17 @@ ENTRY(cpu_feroceon_proc_init)
 	movne	r2, r2, lsr #2			@ turned into # of sets
 	sub	r2, r2, #(1 << 5)
 	stmia	r1, {r2, r3}
+#ifdef CONFIG_VFP
+	mov	r1, #1				@ disable quirky VFP
+	str_l	r1, VFP_arch_feroceon, r2
+#endif
 	ret	lr
+SYM_FUNC_END(cpu_feroceon_proc_init)
 
 /*
  * cpu_feroceon_proc_fin()
  */
-ENTRY(cpu_feroceon_proc_fin)
+SYM_TYPED_FUNC_START(cpu_feroceon_proc_fin)
 #if defined(CONFIG_CACHE_FEROCEON_L2) && \
 	!defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
 	mov	r0, #0
@@ -74,6 +80,7 @@ ENTRY(cpu_feroceon_proc_fin)
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
+SYM_FUNC_END(cpu_feroceon_proc_fin)
 
 /*
  * cpu_feroceon_reset(loc)
@@ -86,7 +93,7 @@ ENTRY(cpu_feroceon_proc_fin)
  */
 	.align	5
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_feroceon_reset)
+SYM_TYPED_FUNC_START(cpu_feroceon_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
@@ -98,7 +105,7 @@ ENTRY(cpu_feroceon_reset)
 	bic	ip, ip, #0x1100			@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	ret	r0
-ENDPROC(cpu_feroceon_reset)
+SYM_FUNC_END(cpu_feroceon_reset)
 	.popsection
 
 /*
@@ -107,22 +114,23 @@ ENDPROC(cpu_feroceon_reset)
  * Called with IRQs disabled
  */
 	.align	5
-ENTRY(cpu_feroceon_do_idle)
+SYM_TYPED_FUNC_START(cpu_feroceon_do_idle)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ Drain write buffer
 	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
 	ret	lr
+SYM_FUNC_END(cpu_feroceon_do_idle)
 
 /*
  *	flush_icache_all()
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
-ENTRY(feroceon_flush_icache_all)
+SYM_TYPED_FUNC_START(feroceon_flush_icache_all)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	ret	lr
-ENDPROC(feroceon_flush_icache_all)
+SYM_FUNC_END(feroceon_flush_icache_all)
 
 /*
  *	flush_user_cache_all()
@@ -131,15 +139,14 @@ ENDPROC(feroceon_flush_icache_all)
  *	address space.
  */
 	.align	5
-ENTRY(feroceon_flush_user_cache_all)
-	/* FALLTHROUGH */
+SYM_FUNC_ALIAS(feroceon_flush_user_cache_all, feroceon_flush_kern_cache_all)
 
 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
-ENTRY(feroceon_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(feroceon_flush_kern_cache_all)
 	mov	r2, #VM_EXEC
 
 __flush_whole_cache:
@@ -157,6 +164,7 @@ __flush_whole_cache:
 	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(feroceon_flush_kern_cache_all)
 
 /*
  *	flush_user_cache_range(start, end, flags)
@@ -169,7 +177,7 @@ __flush_whole_cache:
  *	- flags	- vm_flags describing address space
  */
 	.align	5
-ENTRY(feroceon_flush_user_cache_range)
+SYM_TYPED_FUNC_START(feroceon_flush_user_cache_range)
 	sub	r3, r1, r0			@ calculate total size
 	cmp	r3, #CACHE_DLIMIT
 	bgt	__flush_whole_cache
@@ -186,6 +194,7 @@ ENTRY(feroceon_flush_user_cache_range)
 	mov	ip, #0
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(feroceon_flush_user_cache_range)
 
 /*
  *	coherent_kern_range(start, end)
@@ -198,8 +207,11 @@ ENTRY(feroceon_flush_user_cache_range)
  *	- end	- virtual end address
  */
 	.align	5
-ENTRY(feroceon_coherent_kern_range)
-	/* FALLTHROUGH */
+SYM_TYPED_FUNC_START(feroceon_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	feroceon_coherent_user_range
+#endif
+SYM_FUNC_END(feroceon_coherent_kern_range)
 
 /*
  *	coherent_user_range(start, end)
@@ -211,7 +223,7 @@ ENTRY(feroceon_coherent_kern_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(feroceon_coherent_user_range)
+SYM_TYPED_FUNC_START(feroceon_coherent_user_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
@@ -221,6 +233,7 @@ ENTRY(feroceon_coherent_user_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	r0, #0
 	ret	lr
+SYM_FUNC_END(feroceon_coherent_user_range)
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -232,7 +245,7 @@ ENTRY(feroceon_coherent_user_range)
  *	- size	- region size
  */
 	.align	5
-ENTRY(feroceon_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(feroceon_flush_kern_dcache_area)
 	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -242,9 +255,10 @@ ENTRY(feroceon_flush_kern_dcache_area)
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(feroceon_flush_kern_dcache_area)
 
 	.align	5
-ENTRY(feroceon_range_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(feroceon_range_flush_kern_dcache_area)
 	mrs	r2, cpsr
 	add	r1, r0, #PAGE_SZ - CACHE_DLINESIZE	@ top addr is inclusive
 	orr	r3, r2, #PSR_I_BIT
@@ -256,6 +270,7 @@ ENTRY(feroceon_range_flush_kern_dcache_area)
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(feroceon_range_flush_kern_dcache_area)
 
 /*
  *	dma_inv_range(start, end)
@@ -342,7 +357,7 @@ feroceon_range_dma_clean_range:
  *	- end	- virtual end address
  */
 	.align	5
-ENTRY(feroceon_dma_flush_range)
+SYM_TYPED_FUNC_START(feroceon_dma_flush_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -350,9 +365,10 @@ ENTRY(feroceon_dma_flush_range)
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(feroceon_dma_flush_range)
 
 	.align	5
-ENTRY(feroceon_range_dma_flush_range)
+SYM_TYPED_FUNC_START(feroceon_range_dma_flush_range)
 	mrs	r2, cpsr
 	cmp	r1, r0
 	subne	r1, r1, #1			@ top address is inclusive
@@ -363,6 +379,7 @@ ENTRY(feroceon_range_dma_flush_range)
 	msr	cpsr_c, r2			@ restore interrupts
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(feroceon_range_dma_flush_range)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -370,13 +387,13 @@ ENTRY(feroceon_range_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(feroceon_dma_map_area)
+SYM_TYPED_FUNC_START(feroceon_dma_map_area)
 	add	r1, r1, r0
 	cmp	r2, #DMA_TO_DEVICE
 	beq	feroceon_dma_clean_range
 	bcs	feroceon_dma_inv_range
 	b	feroceon_dma_flush_range
-ENDPROC(feroceon_dma_map_area)
+SYM_FUNC_END(feroceon_dma_map_area)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -384,13 +401,13 @@ ENDPROC(feroceon_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(feroceon_range_dma_map_area)
+SYM_TYPED_FUNC_START(feroceon_range_dma_map_area)
 	add	r1, r1, r0
 	cmp	r2, #DMA_TO_DEVICE
 	beq	feroceon_range_dma_clean_range
 	bcs	feroceon_range_dma_inv_range
 	b	feroceon_range_dma_flush_range
-ENDPROC(feroceon_range_dma_map_area)
+SYM_FUNC_END(feroceon_range_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -398,39 +415,12 @@ ENDPROC(feroceon_range_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(feroceon_dma_unmap_area)
+SYM_TYPED_FUNC_START(feroceon_dma_unmap_area)
 	ret	lr
-ENDPROC(feroceon_dma_unmap_area)
-
-	.globl	feroceon_flush_kern_cache_louis
-	.equ	feroceon_flush_kern_cache_louis, feroceon_flush_kern_cache_all
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions feroceon
-
-.macro range_alias basename
-	.globl feroceon_range_\basename
-	.type feroceon_range_\basename , %function
-	.equ feroceon_range_\basename , feroceon_\basename
-.endm
-
-/*
- * Most of the cache functions are unchanged for this case.
- * Export suitable alias symbols for the unchanged functions:
- */
-	range_alias flush_icache_all
-	range_alias flush_user_cache_all
-	range_alias flush_kern_cache_all
-	range_alias flush_kern_cache_louis
-	range_alias flush_user_cache_range
-	range_alias coherent_kern_range
-	range_alias coherent_user_range
-	range_alias dma_unmap_area
-
-	define_cache_functions feroceon_range
+SYM_FUNC_END(feroceon_dma_unmap_area)
 
 	.align	5
-ENTRY(cpu_feroceon_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_feroceon_dcache_clean_area)
 #if defined(CONFIG_CACHE_FEROCEON_L2) && \
 	!defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
 	mov	r2, r0
@@ -449,6 +439,7 @@ ENTRY(cpu_feroceon_dcache_clean_area)
 #endif
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(cpu_feroceon_dcache_clean_area)
 
 /* =============================== PageTable ============================== */
 
@@ -460,7 +451,7 @@ ENTRY(cpu_feroceon_dcache_clean_area)
  * pgd: new page tables
  */
 	.align	5
-ENTRY(cpu_feroceon_switch_mm)
+SYM_TYPED_FUNC_START(cpu_feroceon_switch_mm)
 #ifdef CONFIG_MMU
 	/*
 	 * Note: we wish to call __flush_whole_cache but we need to preserve
@@ -481,6 +472,7 @@ ENTRY(cpu_feroceon_switch_mm)
 #else
 	ret	lr
 #endif
+SYM_FUNC_END(cpu_feroceon_switch_mm)
 
 /*
  * cpu_feroceon_set_pte_ext(ptep, pte, ext)
@@ -488,7 +480,7 @@ ENTRY(cpu_feroceon_switch_mm)
  * Set a PTE and flush it out
  */
 	.align	5
-ENTRY(cpu_feroceon_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_feroceon_set_pte_ext)
 #ifdef CONFIG_MMU
 	armv3_set_pte_ext wc_disable=0
 	mov	r0, r0
@@ -500,21 +492,22 @@ ENTRY(cpu_feroceon_set_pte_ext)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_feroceon_set_pte_ext)
 
 /* Suspend/resume support: taken from arch/arm/mm/proc-arm926.S */
 .globl	cpu_feroceon_suspend_size
 .equ	cpu_feroceon_suspend_size, 4 * 3
 #ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_feroceon_do_suspend)
+SYM_TYPED_FUNC_START(cpu_feroceon_do_suspend)
 	stmfd	sp!, {r4 - r6, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ PID
 	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
 	mrc	p15, 0, r6, c1, c0, 0	@ Control register
 	stmia	r0, {r4 - r6}
 	ldmfd	sp!, {r4 - r6, pc}
-ENDPROC(cpu_feroceon_do_suspend)
+SYM_FUNC_END(cpu_feroceon_do_suspend)
 
-ENTRY(cpu_feroceon_do_resume)
+SYM_TYPED_FUNC_START(cpu_feroceon_do_resume)
 	mov	ip, #0
 	mcr	p15, 0, ip, c8, c7, 0	@ invalidate I+D TLBs
 	mcr	p15, 0, ip, c7, c7, 0	@ invalidate I+D caches
@@ -524,7 +517,7 @@ ENTRY(cpu_feroceon_do_resume)
 	mcr	p15, 0, r1, c2, c0, 0	@ TTB address
 	mov	r0, r6			@ control register
 	b	cpu_resume_mmu
-ENDPROC(cpu_feroceon_do_resume)
+SYM_FUNC_END(cpu_feroceon_do_resume)
 #endif
 
 	.type	__feroceon_setup, #function
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index fa6999e24b07..e388c4cc0c44 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -6,6 +6,7 @@
  *  VM_EXEC
  */
 #include <asm/asm-offsets.h>
+#include <asm/pgtable.h>
 #include <asm/thread_info.h>
 
 #ifdef CONFIG_CPU_V7M
@@ -319,39 +320,6 @@ ENTRY(\name\()_processor_functions)
 #endif
 .endm
 
-.macro define_cache_functions name:req
-	.align 2
-	.type	\name\()_cache_fns, #object
-ENTRY(\name\()_cache_fns)
-	.long	\name\()_flush_icache_all
-	.long	\name\()_flush_kern_cache_all
-	.long   \name\()_flush_kern_cache_louis
-	.long	\name\()_flush_user_cache_all
-	.long	\name\()_flush_user_cache_range
-	.long	\name\()_coherent_kern_range
-	.long	\name\()_coherent_user_range
-	.long	\name\()_flush_kern_dcache_area
-	.long	\name\()_dma_map_area
-	.long	\name\()_dma_unmap_area
-	.long	\name\()_dma_flush_range
-	.size	\name\()_cache_fns, . - \name\()_cache_fns
-.endm
-
-.macro define_tlb_functions name:req, flags_up:req, flags_smp
-	.type	\name\()_tlb_fns, #object
-	.align 2
-ENTRY(\name\()_tlb_fns)
-	.long	\name\()_flush_user_tlb_range
-	.long	\name\()_flush_kern_tlb_range
-	.ifnb \flags_smp
-		ALT_SMP(.long	\flags_smp )
-		ALT_UP(.long	\flags_up )
-	.else
-		.long	\flags_up
-	.endif
-	.size	\name\()_tlb_fns, . - \name\()_tlb_fns
-.endm
-
 .macro globl_equ x, y
 	.globl	\x
 	.equ	\x, \y
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index 1645ccaffe96..4669c63e3121 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -9,6 +9,7 @@
 
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/hwcap.h>
@@ -31,18 +32,20 @@
 /*
  * cpu_mohawk_proc_init()
  */
-ENTRY(cpu_mohawk_proc_init)
+SYM_TYPED_FUNC_START(cpu_mohawk_proc_init)
 	ret	lr
+SYM_FUNC_END(cpu_mohawk_proc_init)
 
 /*
  * cpu_mohawk_proc_fin()
  */
-ENTRY(cpu_mohawk_proc_fin)
+SYM_TYPED_FUNC_START(cpu_mohawk_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1800			@ ...iz...........
 	bic	r0, r0, #0x0006			@ .............ca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
+SYM_FUNC_END(cpu_mohawk_proc_fin)
 
 /*
  * cpu_mohawk_reset(loc)
@@ -57,7 +60,7 @@ ENTRY(cpu_mohawk_proc_fin)
  */
 	.align	5
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_mohawk_reset)
+SYM_TYPED_FUNC_START(cpu_mohawk_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
@@ -67,7 +70,7 @@ ENTRY(cpu_mohawk_reset)
 	bic	ip, ip, #0x1100			@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	ret	r0
-ENDPROC(cpu_mohawk_reset)
+SYM_FUNC_END(cpu_mohawk_reset)
 	.popsection
 
 /*
@@ -76,22 +79,23 @@ ENDPROC(cpu_mohawk_reset)
  * Called with IRQs disabled
  */
 	.align	5
-ENTRY(cpu_mohawk_do_idle)
+SYM_TYPED_FUNC_START(cpu_mohawk_do_idle)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
 	mcr	p15, 0, r0, c7, c0, 4		@ wait for interrupt
 	ret	lr
+SYM_FUNC_END(cpu_mohawk_do_idle)
 
 /*
  *	flush_icache_all()
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
-ENTRY(mohawk_flush_icache_all)
+SYM_TYPED_FUNC_START(mohawk_flush_icache_all)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	ret	lr
-ENDPROC(mohawk_flush_icache_all)
+SYM_FUNC_END(mohawk_flush_icache_all)
 
 /*
  *	flush_user_cache_all()
@@ -99,15 +103,14 @@ ENDPROC(mohawk_flush_icache_all)
  *	Clean and invalidate all cache entries in a particular
  *	address space.
  */
-ENTRY(mohawk_flush_user_cache_all)
-	/* FALLTHROUGH */
+SYM_FUNC_ALIAS(mohawk_flush_user_cache_all, mohawk_flush_kern_cache_all)
 
 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
-ENTRY(mohawk_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(mohawk_flush_kern_cache_all)
 	mov	r2, #VM_EXEC
 	mov	ip, #0
 __flush_whole_cache:
@@ -116,6 +119,7 @@ __flush_whole_cache:
 	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
 	mcrne	p15, 0, ip, c7, c10, 0		@ drain write buffer
 	ret	lr
+SYM_FUNC_END(mohawk_flush_kern_cache_all)
 
 /*
  *	flush_user_cache_range(start, end, flags)
@@ -129,7 +133,7 @@ __flush_whole_cache:
  *
  * (same as arm926)
  */
-ENTRY(mohawk_flush_user_cache_range)
+SYM_TYPED_FUNC_START(mohawk_flush_user_cache_range)
 	mov	ip, #0
 	sub	r3, r1, r0			@ calculate total size
 	cmp	r3, #CACHE_DLIMIT
@@ -146,6 +150,7 @@ ENTRY(mohawk_flush_user_cache_range)
 	tst	r2, #VM_EXEC
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(mohawk_flush_user_cache_range)
 
 /*
  *	coherent_kern_range(start, end)
@@ -157,8 +162,11 @@ ENTRY(mohawk_flush_user_cache_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(mohawk_coherent_kern_range)
-	/* FALLTHROUGH */
+SYM_TYPED_FUNC_START(mohawk_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	mohawk_coherent_user_range
+#endif
+SYM_FUNC_END(mohawk_coherent_kern_range)
 
 /*
  *	coherent_user_range(start, end)
@@ -172,7 +180,7 @@ ENTRY(mohawk_coherent_kern_range)
  *
  * (same as arm926)
  */
-ENTRY(mohawk_coherent_user_range)
+SYM_TYPED_FUNC_START(mohawk_coherent_user_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
@@ -182,6 +190,7 @@ ENTRY(mohawk_coherent_user_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	r0, #0
 	ret	lr
+SYM_FUNC_END(mohawk_coherent_user_range)
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -192,7 +201,7 @@ ENTRY(mohawk_coherent_user_range)
  *	- addr	- kernel address
  *	- size	- region size
  */
-ENTRY(mohawk_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(mohawk_flush_kern_dcache_area)
 	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -202,6 +211,7 @@ ENTRY(mohawk_flush_kern_dcache_area)
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(mohawk_flush_kern_dcache_area)
 
 /*
  *	dma_inv_range(start, end)
@@ -256,7 +266,7 @@ mohawk_dma_clean_range:
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(mohawk_dma_flush_range)
+SYM_TYPED_FUNC_START(mohawk_dma_flush_range)
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:
 	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
@@ -265,6 +275,7 @@ ENTRY(mohawk_dma_flush_range)
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(mohawk_dma_flush_range)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -272,13 +283,13 @@ ENTRY(mohawk_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(mohawk_dma_map_area)
+SYM_TYPED_FUNC_START(mohawk_dma_map_area)
 	add	r1, r1, r0
 	cmp	r2, #DMA_TO_DEVICE
 	beq	mohawk_dma_clean_range
 	bcs	mohawk_dma_inv_range
 	b	mohawk_dma_flush_range
-ENDPROC(mohawk_dma_map_area)
+SYM_FUNC_END(mohawk_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -286,23 +297,18 @@ ENDPROC(mohawk_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(mohawk_dma_unmap_area)
+SYM_TYPED_FUNC_START(mohawk_dma_unmap_area)
 	ret	lr
-ENDPROC(mohawk_dma_unmap_area)
-
-	.globl	mohawk_flush_kern_cache_louis
-	.equ	mohawk_flush_kern_cache_louis, mohawk_flush_kern_cache_all
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions mohawk
+SYM_FUNC_END(mohawk_dma_unmap_area)
 
-ENTRY(cpu_mohawk_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_mohawk_dcache_clean_area)
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	subs	r1, r1, #CACHE_DLINESIZE
 	bhi	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+SYM_FUNC_END(cpu_mohawk_dcache_clean_area)
 
 /*
  * cpu_mohawk_switch_mm(pgd)
@@ -312,7 +318,7 @@ ENTRY(cpu_mohawk_dcache_clean_area)
  * pgd: new page tables
  */
 	.align	5
-ENTRY(cpu_mohawk_switch_mm)
+SYM_TYPED_FUNC_START(cpu_mohawk_switch_mm)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c14, 0		@ clean & invalidate all D cache
 	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
@@ -321,6 +327,7 @@ ENTRY(cpu_mohawk_switch_mm)
 	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
 	ret	lr
+SYM_FUNC_END(cpu_mohawk_switch_mm)
 
 /*
  * cpu_mohawk_set_pte_ext(ptep, pte, ext)
@@ -328,7 +335,7 @@ ENTRY(cpu_mohawk_switch_mm)
  * Set a PTE and flush it out
  */
 	.align	5
-ENTRY(cpu_mohawk_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_mohawk_set_pte_ext)
 #ifdef CONFIG_MMU
 	armv3_set_pte_ext
 	mov	r0, r0
@@ -336,11 +343,12 @@ ENTRY(cpu_mohawk_set_pte_ext)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
 #endif
+SYM_FUNC_END(cpu_mohawk_set_pte_ext)
 
 .globl	cpu_mohawk_suspend_size
 .equ	cpu_mohawk_suspend_size, 4 * 6
 #ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_mohawk_do_suspend)
+SYM_TYPED_FUNC_START(cpu_mohawk_do_suspend)
 	stmfd	sp!, {r4 - r9, lr}
 	mrc	p14, 0, r4, c6, c0, 0	@ clock configuration, for turbo mode
 	mrc	p15, 0, r5, c15, c1, 0	@ CP access reg
@@ -351,9 +359,9 @@ ENTRY(cpu_mohawk_do_suspend)
 	bic	r4, r4, #2		@ clear frequency change bit
 	stmia	r0, {r4 - r9}		@ store cp regs
 	ldmia	sp!, {r4 - r9, pc}
-ENDPROC(cpu_mohawk_do_suspend)
+SYM_FUNC_END(cpu_mohawk_do_suspend)
 
-ENTRY(cpu_mohawk_do_resume)
+SYM_TYPED_FUNC_START(cpu_mohawk_do_resume)
 	ldmia	r0, {r4 - r9}		@ load cp regs
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0	@ invalidate I & D caches, BTB
@@ -369,7 +377,7 @@ ENTRY(cpu_mohawk_do_resume)
 	mcr	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
 	mov	r0, r9			@ control register
 	b	cpu_resume_mmu
-ENDPROC(cpu_mohawk_do_resume)
+SYM_FUNC_END(cpu_mohawk_do_resume)
 #endif
 
 	.type	__mohawk_setup, #function
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 4071f7a61cb6..3da76fab8ac3 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -12,6 +12,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
@@ -32,15 +33,16 @@
 /*
  * cpu_sa110_proc_init()
  */
-ENTRY(cpu_sa110_proc_init)
+SYM_TYPED_FUNC_START(cpu_sa110_proc_init)
 	mov	r0, #0
 	mcr	p15, 0, r0, c15, c1, 2		@ Enable clock switching
 	ret	lr
+SYM_FUNC_END(cpu_sa110_proc_init)
 
 /*
  * cpu_sa110_proc_fin()
  */
-ENTRY(cpu_sa110_proc_fin)
+SYM_TYPED_FUNC_START(cpu_sa110_proc_fin)
 	mov	r0, #0
 	mcr	p15, 0, r0, c15, c2, 2		@ Disable clock switching
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
@@ -48,6 +50,7 @@ ENTRY(cpu_sa110_proc_fin)
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
+SYM_FUNC_END(cpu_sa110_proc_fin)
 
 /*
  * cpu_sa110_reset(loc)
@@ -60,7 +63,7 @@ ENTRY(cpu_sa110_proc_fin)
  */
 	.align	5
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_sa110_reset)
+SYM_TYPED_FUNC_START(cpu_sa110_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
@@ -72,7 +75,7 @@ ENTRY(cpu_sa110_reset)
 	bic	ip, ip, #0x1100			@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	ret	r0
-ENDPROC(cpu_sa110_reset)
+SYM_FUNC_END(cpu_sa110_reset)
 	.popsection
 
 /*
@@ -88,7 +91,7 @@ ENDPROC(cpu_sa110_reset)
  */
 	.align	5
 
-ENTRY(cpu_sa110_do_idle)
+SYM_TYPED_FUNC_START(cpu_sa110_do_idle)
 	mcr	p15, 0, ip, c15, c2, 2		@ disable clock switching
 	ldr	r1, =UNCACHEABLE_ADDR		@ load from uncacheable loc
 	ldr	r1, [r1, #0]			@ force switch to MCLK
@@ -101,6 +104,7 @@ ENTRY(cpu_sa110_do_idle)
 	mov	r0, r0				@ safety
 	mcr	p15, 0, r0, c15, c1, 2		@ enable clock switching
 	ret	lr
+SYM_FUNC_END(cpu_sa110_do_idle)
 
 /* ================================= CACHE ================================ */
 
@@ -113,12 +117,13 @@ ENTRY(cpu_sa110_do_idle)
  * addr: cache-unaligned virtual address
  */
 	.align	5
-ENTRY(cpu_sa110_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_sa110_dcache_clean_area)
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #DCACHELINESIZE
 	subs	r1, r1, #DCACHELINESIZE
 	bhi	1b
 	ret	lr
+SYM_FUNC_END(cpu_sa110_dcache_clean_area)
 
 /* =============================== PageTable ============================== */
 
@@ -130,7 +135,7 @@ ENTRY(cpu_sa110_dcache_clean_area)
  * pgd: new page tables
  */
 	.align	5
-ENTRY(cpu_sa110_switch_mm)
+SYM_TYPED_FUNC_START(cpu_sa110_switch_mm)
 #ifdef CONFIG_MMU
 	str	lr, [sp, #-4]!
 	bl	v4wb_flush_kern_cache_all	@ clears IP
@@ -140,6 +145,7 @@ ENTRY(cpu_sa110_switch_mm)
 #else
 	ret	lr
 #endif
+SYM_FUNC_END(cpu_sa110_switch_mm)
 
 /*
  * cpu_sa110_set_pte_ext(ptep, pte, ext)
@@ -147,7 +153,7 @@ ENTRY(cpu_sa110_switch_mm)
  * Set a PTE and flush it out
  */
 	.align	5
-ENTRY(cpu_sa110_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_sa110_set_pte_ext)
 #ifdef CONFIG_MMU
 	armv3_set_pte_ext wc_disable=0
 	mov	r0, r0
@@ -155,6 +161,7 @@ ENTRY(cpu_sa110_set_pte_ext)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_sa110_set_pte_ext)
 
 	.type	__sa110_setup, #function
 __sa110_setup:
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index e723bd4119d3..7c496195e440 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -17,6 +17,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
@@ -36,11 +37,12 @@
 /*
  * cpu_sa1100_proc_init()
  */
-ENTRY(cpu_sa1100_proc_init)
+SYM_TYPED_FUNC_START(cpu_sa1100_proc_init)
 	mov	r0, #0
 	mcr	p15, 0, r0, c15, c1, 2		@ Enable clock switching
 	mcr	p15, 0, r0, c9, c0, 5		@ Allow read-buffer operations from userland
 	ret	lr
+SYM_FUNC_END(cpu_sa1100_proc_init)
 
 /*
  * cpu_sa1100_proc_fin()
@@ -49,13 +51,14 @@ ENTRY(cpu_sa1100_proc_init)
  *  - Disable interrupts
  *  - Clean and turn off caches.
  */
-ENTRY(cpu_sa1100_proc_fin)
+SYM_TYPED_FUNC_START(cpu_sa1100_proc_fin)
 	mcr	p15, 0, ip, c15, c2, 2		@ Disable clock switching
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
+SYM_FUNC_END(cpu_sa1100_proc_fin)
 
 /*
  * cpu_sa1100_reset(loc)
@@ -68,7 +71,7 @@ ENTRY(cpu_sa1100_proc_fin)
  */
 	.align	5
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_sa1100_reset)
+SYM_TYPED_FUNC_START(cpu_sa1100_reset)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
@@ -80,7 +83,7 @@ ENTRY(cpu_sa1100_reset)
 	bic	ip, ip, #0x1100			@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	ret	r0
-ENDPROC(cpu_sa1100_reset)
+SYM_FUNC_END(cpu_sa1100_reset)
 	.popsection
 
 /*
@@ -95,7 +98,7 @@ ENDPROC(cpu_sa1100_reset)
  *   3 = switch to fast processor clock
  */
 	.align	5
-ENTRY(cpu_sa1100_do_idle)
+SYM_TYPED_FUNC_START(cpu_sa1100_do_idle)
 	mov	r0, r0				@ 4 nop padding
 	mov	r0, r0
 	mov	r0, r0
@@ -111,6 +114,7 @@ ENTRY(cpu_sa1100_do_idle)
 	mov	r0, r0				@ safety
 	mcr	p15, 0, r0, c15, c1, 2		@ enable clock switching
 	ret	lr
+SYM_FUNC_END(cpu_sa1100_do_idle)
 
 /* ================================= CACHE ================================ */
 
@@ -123,12 +127,13 @@ ENTRY(cpu_sa1100_do_idle)
  * addr: cache-unaligned virtual address
  */
 	.align	5
-ENTRY(cpu_sa1100_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_sa1100_dcache_clean_area)
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #DCACHELINESIZE
 	subs	r1, r1, #DCACHELINESIZE
 	bhi	1b
 	ret	lr
+SYM_FUNC_END(cpu_sa1100_dcache_clean_area)
 
 /* =============================== PageTable ============================== */
 
@@ -140,7 +145,7 @@ ENTRY(cpu_sa1100_dcache_clean_area)
  * pgd: new page tables
  */
 	.align	5
-ENTRY(cpu_sa1100_switch_mm)
+SYM_TYPED_FUNC_START(cpu_sa1100_switch_mm)
 #ifdef CONFIG_MMU
 	str	lr, [sp, #-4]!
 	bl	v4wb_flush_kern_cache_all	@ clears IP
@@ -151,6 +156,7 @@ ENTRY(cpu_sa1100_switch_mm)
 #else
 	ret	lr
 #endif
+SYM_FUNC_END(cpu_sa1100_switch_mm)
 
 /*
  * cpu_sa1100_set_pte_ext(ptep, pte, ext)
@@ -158,7 +164,7 @@ ENTRY(cpu_sa1100_switch_mm)
  * Set a PTE and flush it out
  */
 	.align	5
-ENTRY(cpu_sa1100_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_sa1100_set_pte_ext)
 #ifdef CONFIG_MMU
 	armv3_set_pte_ext wc_disable=0
 	mov	r0, r0
@@ -166,20 +172,21 @@ ENTRY(cpu_sa1100_set_pte_ext)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_sa1100_set_pte_ext)
 
 .globl	cpu_sa1100_suspend_size
 .equ	cpu_sa1100_suspend_size, 4 * 3
 #ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_sa1100_do_suspend)
+SYM_TYPED_FUNC_START(cpu_sa1100_do_suspend)
 	stmfd	sp!, {r4 - r6, lr}
 	mrc	p15, 0, r4, c3, c0, 0		@ domain ID
 	mrc	p15, 0, r5, c13, c0, 0		@ PID
 	mrc	p15, 0, r6, c1, c0, 0		@ control reg
 	stmia	r0, {r4 - r6}			@ store cp regs
 	ldmfd	sp!, {r4 - r6, pc}
-ENDPROC(cpu_sa1100_do_suspend)
+SYM_FUNC_END(cpu_sa1100_do_suspend)
 
-ENTRY(cpu_sa1100_do_resume)
+SYM_TYPED_FUNC_START(cpu_sa1100_do_resume)
 	ldmia	r0, {r4 - r6}			@ load cp regs
 	mov	ip, #0
 	mcr	p15, 0, ip, c8, c7, 0		@ flush I+D TLBs
@@ -192,7 +199,7 @@ ENTRY(cpu_sa1100_do_resume)
 	mcr	p15, 0, r5, c13, c0, 0		@ PID
 	mov	r0, r6				@ control register
 	b	cpu_resume_mmu
-ENDPROC(cpu_sa1100_do_resume)
+SYM_FUNC_END(cpu_sa1100_do_resume)
 #endif
 
 	.type	__sa1100_setup, #function
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index a0618f3e6836..90a01f5950b9 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -8,6 +8,7 @@
  *  This is the "shell" of the ARMv6 processor support.
  */
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/linkage.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
@@ -32,15 +33,19 @@
 #define TTB_FLAGS_SMP	TTB_RGN_WBWA|TTB_S
 #define PMD_FLAGS_SMP	PMD_SECT_WBWA|PMD_SECT_S
 
-ENTRY(cpu_v6_proc_init)
+.arch armv6
+
+SYM_TYPED_FUNC_START(cpu_v6_proc_init)
 	ret	lr
+SYM_FUNC_END(cpu_v6_proc_init)
 
-ENTRY(cpu_v6_proc_fin)
+SYM_TYPED_FUNC_START(cpu_v6_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x0006			@ .............ca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
+SYM_FUNC_END(cpu_v6_proc_fin)
 
 /*
  *	cpu_v6_reset(loc)
@@ -53,14 +58,14 @@ ENTRY(cpu_v6_proc_fin)
  */
 	.align	5
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_v6_reset)
+SYM_TYPED_FUNC_START(cpu_v6_reset)
 	mrc	p15, 0, r1, c1, c0, 0		@ ctrl register
 	bic	r1, r1, #0x1			@ ...............m
 	mcr	p15, 0, r1, c1, c0, 0		@ disable MMU
 	mov	r1, #0
 	mcr	p15, 0, r1, c7, c5, 4		@ ISB
 	ret	r0
-ENDPROC(cpu_v6_reset)
+SYM_FUNC_END(cpu_v6_reset)
 	.popsection
 
 /*
@@ -70,18 +75,20 @@ ENDPROC(cpu_v6_reset)
  *
  *	IRQs are already disabled.
  */
-ENTRY(cpu_v6_do_idle)
+SYM_TYPED_FUNC_START(cpu_v6_do_idle)
 	mov	r1, #0
 	mcr	p15, 0, r1, c7, c10, 4		@ DWB - WFI may enter a low-power mode
 	mcr	p15, 0, r1, c7, c0, 4		@ wait for interrupt
 	ret	lr
+SYM_FUNC_END(cpu_v6_do_idle)
 
-ENTRY(cpu_v6_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_v6_dcache_clean_area)
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	subs	r1, r1, #D_CACHE_LINE_SIZE
 	bhi	1b
 	ret	lr
+SYM_FUNC_END(cpu_v6_dcache_clean_area)
 
 /*
  *	cpu_v6_switch_mm(pgd_phys, tsk)
@@ -93,7 +100,7 @@ ENTRY(cpu_v6_dcache_clean_area)
  *	It is assumed that:
  *	- we are not using split page tables
  */
-ENTRY(cpu_v6_switch_mm)
+SYM_TYPED_FUNC_START(cpu_v6_switch_mm)
 #ifdef CONFIG_MMU
 	mov	r2, #0
 	mmid	r1, r1				@ get mm->context.id
@@ -111,6 +118,7 @@ ENTRY(cpu_v6_switch_mm)
 	mcr	p15, 0, r1, c13, c0, 1		@ set context ID
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_v6_switch_mm)
 
 /*
  *	cpu_v6_set_pte_ext(ptep, pte, ext)
@@ -124,17 +132,18 @@ ENTRY(cpu_v6_switch_mm)
  */
 	armv6_mt_table cpu_v6
 
-ENTRY(cpu_v6_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_v6_set_pte_ext)
 #ifdef CONFIG_MMU
 	armv6_set_pte_ext cpu_v6
 #endif
 	ret	lr
+SYM_FUNC_END(cpu_v6_set_pte_ext)
 
 /* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
 .globl	cpu_v6_suspend_size
 .equ	cpu_v6_suspend_size, 4 * 6
 #ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_v6_do_suspend)
+SYM_TYPED_FUNC_START(cpu_v6_do_suspend)
 	stmfd	sp!, {r4 - r9, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
 #ifdef CONFIG_MMU
@@ -146,9 +155,9 @@ ENTRY(cpu_v6_do_suspend)
 	mrc	p15, 0, r9, c1, c0, 0	@ control register
 	stmia	r0, {r4 - r9}
 	ldmfd	sp!, {r4- r9, pc}
-ENDPROC(cpu_v6_do_suspend)
+SYM_FUNC_END(cpu_v6_do_suspend)
 
-ENTRY(cpu_v6_do_resume)
+SYM_TYPED_FUNC_START(cpu_v6_do_resume)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c14, 0	@ clean+invalidate D cache
 	mcr	p15, 0, ip, c7, c5, 0	@ invalidate I cache
@@ -170,7 +179,7 @@ ENTRY(cpu_v6_do_resume)
 	mcr	p15, 0, ip, c7, c5, 4	@ ISB
 	mov	r0, r9			@ control register
 	b	cpu_resume_mmu
-ENDPROC(cpu_v6_do_resume)
+SYM_FUNC_END(cpu_v6_do_resume)
 #endif
 
 	string	cpu_v6_name, "ARMv6-compatible processor"
diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S
index 5db029c8f987..1007702fcaf3 100644
--- a/arch/arm/mm/proc-v7-2level.S
+++ b/arch/arm/mm/proc-v7-2level.S
@@ -24,6 +24,8 @@
 #define TTB_FLAGS_SMP	TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
 #define PMD_FLAGS_SMP	PMD_SECT_WBWA|PMD_SECT_S
 
+.arch armv7-a
+
 /*
  *	cpu_v7_switch_mm(pgd_phys, tsk)
  *
@@ -38,7 +40,7 @@
  *	even on Cortex-A8 revisions not affected by 430973.
  *	If IBE is not set, the flush BTAC/BTB won't do anything.
  */
-ENTRY(cpu_v7_switch_mm)
+SYM_TYPED_FUNC_START(cpu_v7_switch_mm)
 #ifdef CONFIG_MMU
 	mmid	r1, r1				@ get mm->context.id
 	ALT_SMP(orr	r0, r0, #TTB_FLAGS_SMP)
@@ -57,7 +59,7 @@ ENTRY(cpu_v7_switch_mm)
 	isb
 #endif
 	bx	lr
-ENDPROC(cpu_v7_switch_mm)
+SYM_FUNC_END(cpu_v7_switch_mm)
 
 /*
  *	cpu_v7_set_pte_ext(ptep, pte)
@@ -69,7 +71,7 @@ ENDPROC(cpu_v7_switch_mm)
  *	- pte   - PTE value to store
  *	- ext	- value for extended PTE bits
  */
-ENTRY(cpu_v7_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_v7_set_pte_ext)
 #ifdef CONFIG_MMU
 	str	r1, [r0]			@ linux version
 
@@ -104,7 +106,7 @@ ENTRY(cpu_v7_set_pte_ext)
 	ALT_UP (mcr	p15, 0, r0, c7, c10, 1)		@ flush_pte
 #endif
 	bx	lr
-ENDPROC(cpu_v7_set_pte_ext)
+SYM_FUNC_END(cpu_v7_set_pte_ext)
 
 	/*
 	 * Memory region attributes with SCTLR.TRE=1
diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S
index 131984462d0d..bdabc15cde56 100644
--- a/arch/arm/mm/proc-v7-3level.S
+++ b/arch/arm/mm/proc-v7-3level.S
@@ -42,7 +42,7 @@
  * Set the translation table base pointer to be pgd_phys (physical address of
  * the new TTB).
  */
-ENTRY(cpu_v7_switch_mm)
+SYM_TYPED_FUNC_START(cpu_v7_switch_mm)
 #ifdef CONFIG_MMU
 	mmid	r2, r2
 	asid	r2, r2
@@ -51,7 +51,7 @@ ENTRY(cpu_v7_switch_mm)
 	isb
 #endif
 	ret	lr
-ENDPROC(cpu_v7_switch_mm)
+SYM_FUNC_END(cpu_v7_switch_mm)
 
 #ifdef __ARMEB__
 #define rl r3
@@ -68,7 +68,7 @@ ENDPROC(cpu_v7_switch_mm)
  * - ptep - pointer to level 3 translation table entry
  * - pte - PTE value to store (64-bit in r2 and r3)
  */
-ENTRY(cpu_v7_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_v7_set_pte_ext)
 #ifdef CONFIG_MMU
 	tst	rl, #L_PTE_VALID
 	beq	1f
@@ -87,7 +87,7 @@ ENTRY(cpu_v7_set_pte_ext)
 	ALT_UP (mcr	p15, 0, r0, c7, c10, 1)		@ flush_pte
 #endif
 	ret	lr
-ENDPROC(cpu_v7_set_pte_ext)
+SYM_FUNC_END(cpu_v7_set_pte_ext)
 
 	/*
 	 * Memory region attributes for LPAE (defined in pgtable-3level.h):
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 26d726a08a34..2cd933342679 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -7,6 +7,7 @@
  *  This is the "shell" of the ARMv7 processor support.
  */
 #include <linux/arm-smccc.h>
+#include <linux/cfi_types.h>
 #include <linux/init.h>
 #include <linux/linkage.h>
 #include <linux/pgtable.h>
@@ -14,7 +15,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 
 #include "proc-macros.S"
 
@@ -24,17 +25,19 @@
 #include "proc-v7-2level.S"
 #endif
 
-ENTRY(cpu_v7_proc_init)
+.arch armv7-a
+
+SYM_TYPED_FUNC_START(cpu_v7_proc_init)
 	ret	lr
-ENDPROC(cpu_v7_proc_init)
+SYM_FUNC_END(cpu_v7_proc_init)
 
-ENTRY(cpu_v7_proc_fin)
+SYM_TYPED_FUNC_START(cpu_v7_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x0006			@ .............ca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
-ENDPROC(cpu_v7_proc_fin)
+SYM_FUNC_END(cpu_v7_proc_fin)
 
 /*
  *	cpu_v7_reset(loc, hyp)
@@ -51,7 +54,7 @@ ENDPROC(cpu_v7_proc_fin)
  */
 	.align	5
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_v7_reset)
+SYM_TYPED_FUNC_START(cpu_v7_reset)
 	mrc	p15, 0, r2, c1, c0, 0		@ ctrl register
 	bic	r2, r2, #0x1			@ ...............m
  THUMB(	bic	r2, r2, #1 << 30 )		@ SCTLR.TE (Thumb exceptions)
@@ -62,7 +65,7 @@ ENTRY(cpu_v7_reset)
 	bne	__hyp_soft_restart
 #endif
 	bx	r0
-ENDPROC(cpu_v7_reset)
+SYM_FUNC_END(cpu_v7_reset)
 	.popsection
 
 /*
@@ -72,13 +75,13 @@ ENDPROC(cpu_v7_reset)
  *
  *	IRQs are already disabled.
  */
-ENTRY(cpu_v7_do_idle)
+SYM_TYPED_FUNC_START(cpu_v7_do_idle)
 	dsb					@ WFI may enter a low-power mode
 	wfi
 	ret	lr
-ENDPROC(cpu_v7_do_idle)
+SYM_FUNC_END(cpu_v7_do_idle)
 
-ENTRY(cpu_v7_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_v7_dcache_clean_area)
 	ALT_SMP(W(nop))			@ MP extensions imply L1 PTW
 	ALT_UP_B(1f)
 	ret	lr
@@ -89,38 +92,39 @@ ENTRY(cpu_v7_dcache_clean_area)
 	bhi	2b
 	dsb	ishst
 	ret	lr
-ENDPROC(cpu_v7_dcache_clean_area)
+SYM_FUNC_END(cpu_v7_dcache_clean_area)
 
-#ifdef CONFIG_ARM_PSCI
+#if defined(CONFIG_ARM_PSCI) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
 	.arch_extension sec
-ENTRY(cpu_v7_smc_switch_mm)
+SYM_TYPED_FUNC_START(cpu_v7_smc_switch_mm)
 	stmfd	sp!, {r0 - r3}
 	movw	r0, #:lower16:ARM_SMCCC_ARCH_WORKAROUND_1
 	movt	r0, #:upper16:ARM_SMCCC_ARCH_WORKAROUND_1
 	smc	#0
 	ldmfd	sp!, {r0 - r3}
 	b	cpu_v7_switch_mm
-ENDPROC(cpu_v7_smc_switch_mm)
+SYM_FUNC_END(cpu_v7_smc_switch_mm)
 	.arch_extension virt
-ENTRY(cpu_v7_hvc_switch_mm)
+SYM_TYPED_FUNC_START(cpu_v7_hvc_switch_mm)
 	stmfd	sp!, {r0 - r3}
 	movw	r0, #:lower16:ARM_SMCCC_ARCH_WORKAROUND_1
 	movt	r0, #:upper16:ARM_SMCCC_ARCH_WORKAROUND_1
 	hvc	#0
 	ldmfd	sp!, {r0 - r3}
 	b	cpu_v7_switch_mm
-ENDPROC(cpu_v7_hvc_switch_mm)
+SYM_FUNC_END(cpu_v7_hvc_switch_mm)
 #endif
-ENTRY(cpu_v7_iciallu_switch_mm)
+
+SYM_TYPED_FUNC_START(cpu_v7_iciallu_switch_mm)
 	mov	r3, #0
 	mcr	p15, 0, r3, c7, c5, 0		@ ICIALLU
 	b	cpu_v7_switch_mm
-ENDPROC(cpu_v7_iciallu_switch_mm)
-ENTRY(cpu_v7_bpiall_switch_mm)
+SYM_FUNC_END(cpu_v7_iciallu_switch_mm)
+SYM_TYPED_FUNC_START(cpu_v7_bpiall_switch_mm)
 	mov	r3, #0
 	mcr	p15, 0, r3, c7, c5, 6		@ flush BTAC/BTB
 	b	cpu_v7_switch_mm
-ENDPROC(cpu_v7_bpiall_switch_mm)
+SYM_FUNC_END(cpu_v7_bpiall_switch_mm)
 
 	string	cpu_v7_name, "ARMv7 Processor"
 	.align
@@ -129,7 +133,7 @@ ENDPROC(cpu_v7_bpiall_switch_mm)
 .globl	cpu_v7_suspend_size
 .equ	cpu_v7_suspend_size, 4 * 9
 #ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_v7_do_suspend)
+SYM_TYPED_FUNC_START(cpu_v7_do_suspend)
 	stmfd	sp!, {r4 - r11, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
 	mrc	p15, 0, r5, c13, c0, 3	@ User r/o thread ID
@@ -148,9 +152,9 @@ ENTRY(cpu_v7_do_suspend)
 	mrc	p15, 0, r10, c1, c0, 2	@ Co-processor access control
 	stmia	r0, {r5 - r11}
 	ldmfd	sp!, {r4 - r11, pc}
-ENDPROC(cpu_v7_do_suspend)
+SYM_FUNC_END(cpu_v7_do_suspend)
 
-ENTRY(cpu_v7_do_resume)
+SYM_TYPED_FUNC_START(cpu_v7_do_resume)
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c5, 0	@ invalidate I cache
 	mcr	p15, 0, ip, c13, c0, 1	@ set reserved context ID
@@ -184,22 +188,22 @@ ENTRY(cpu_v7_do_resume)
 	dsb
 	mov	r0, r8			@ control register
 	b	cpu_resume_mmu
-ENDPROC(cpu_v7_do_resume)
+SYM_FUNC_END(cpu_v7_do_resume)
 #endif
 
 .globl	cpu_ca9mp_suspend_size
 .equ	cpu_ca9mp_suspend_size, cpu_v7_suspend_size + 4 * 2
 #ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_ca9mp_do_suspend)
+SYM_TYPED_FUNC_START(cpu_ca9mp_do_suspend)
 	stmfd	sp!, {r4 - r5}
 	mrc	p15, 0, r4, c15, c0, 1		@ Diagnostic register
 	mrc	p15, 0, r5, c15, c0, 0		@ Power register
 	stmia	r0!, {r4 - r5}
 	ldmfd	sp!, {r4 - r5}
 	b	cpu_v7_do_suspend
-ENDPROC(cpu_ca9mp_do_suspend)
+SYM_FUNC_END(cpu_ca9mp_do_suspend)
 
-ENTRY(cpu_ca9mp_do_resume)
+SYM_TYPED_FUNC_START(cpu_ca9mp_do_resume)
 	ldmia	r0!, {r4 - r5}
 	mrc	p15, 0, r10, c15, c0, 1		@ Read Diagnostic register
 	teq	r4, r10				@ Already restored?
@@ -208,7 +212,7 @@ ENTRY(cpu_ca9mp_do_resume)
 	teq	r5, r10				@ Already restored?
 	mcrne	p15, 0, r5, c15, c0, 0		@ No, so restore it
 	b	cpu_v7_do_resume
-ENDPROC(cpu_ca9mp_do_resume)
+SYM_FUNC_END(cpu_ca9mp_do_resume)
 #endif
 
 #ifdef CONFIG_CPU_PJ4B
@@ -218,18 +222,18 @@ ENDPROC(cpu_ca9mp_do_resume)
 	globl_equ	cpu_pj4b_proc_fin, 	cpu_v7_proc_fin
 	globl_equ	cpu_pj4b_reset,	   	cpu_v7_reset
 #ifdef CONFIG_PJ4B_ERRATA_4742
-ENTRY(cpu_pj4b_do_idle)
+SYM_TYPED_FUNC_START(cpu_pj4b_do_idle)
 	dsb					@ WFI may enter a low-power mode
 	wfi
 	dsb					@barrier
 	ret	lr
-ENDPROC(cpu_pj4b_do_idle)
+SYM_FUNC_END(cpu_pj4b_do_idle)
 #else
 	globl_equ	cpu_pj4b_do_idle,  	cpu_v7_do_idle
 #endif
 	globl_equ	cpu_pj4b_dcache_clean_area,	cpu_v7_dcache_clean_area
 #ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_pj4b_do_suspend)
+SYM_TYPED_FUNC_START(cpu_pj4b_do_suspend)
 	stmfd	sp!, {r6 - r10}
 	mrc	p15, 1, r6, c15, c1, 0  @ save CP15 - extra features
 	mrc	p15, 1, r7, c15, c2, 0	@ save CP15 - Aux Func Modes Ctrl 0
@@ -239,9 +243,9 @@ ENTRY(cpu_pj4b_do_suspend)
 	stmia	r0!, {r6 - r10}
 	ldmfd	sp!, {r6 - r10}
 	b cpu_v7_do_suspend
-ENDPROC(cpu_pj4b_do_suspend)
+SYM_FUNC_END(cpu_pj4b_do_suspend)
 
-ENTRY(cpu_pj4b_do_resume)
+SYM_TYPED_FUNC_START(cpu_pj4b_do_resume)
 	ldmia	r0!, {r6 - r10}
 	mcr	p15, 1, r6, c15, c1, 0  @ restore CP15 - extra features
 	mcr	p15, 1, r7, c15, c2, 0	@ restore CP15 - Aux Func Modes Ctrl 0
@@ -249,7 +253,7 @@ ENTRY(cpu_pj4b_do_resume)
 	mcr	p15, 1, r9, c15, c1, 1  @ restore CP15 - Aux Debug Modes Ctrl 1
 	mcr	p15, 0, r10, c9, c14, 0  @ restore CP15 - PMC
 	b cpu_v7_do_resume
-ENDPROC(cpu_pj4b_do_resume)
+SYM_FUNC_END(cpu_pj4b_do_resume)
 #endif
 .globl	cpu_pj4b_suspend_size
 .equ	cpu_pj4b_suspend_size, cpu_v7_suspend_size + 4 * 5
diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S
index 335144d50134..d4675603593b 100644
--- a/arch/arm/mm/proc-v7m.S
+++ b/arch/arm/mm/proc-v7m.S
@@ -8,18 +8,19 @@
  *  This is the "shell" of the ARMv7-M processor support.
  */
 #include <linux/linkage.h>
+#include <linux/cfi_types.h>
 #include <asm/assembler.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 #include <asm/v7m.h>
 #include "proc-macros.S"
 
-ENTRY(cpu_v7m_proc_init)
+SYM_TYPED_FUNC_START(cpu_v7m_proc_init)
 	ret	lr
-ENDPROC(cpu_v7m_proc_init)
+SYM_FUNC_END(cpu_v7m_proc_init)
 
-ENTRY(cpu_v7m_proc_fin)
+SYM_TYPED_FUNC_START(cpu_v7m_proc_fin)
 	ret	lr
-ENDPROC(cpu_v7m_proc_fin)
+SYM_FUNC_END(cpu_v7m_proc_fin)
 
 /*
  *	cpu_v7m_reset(loc)
@@ -31,9 +32,9 @@ ENDPROC(cpu_v7m_proc_fin)
  *	- loc   - location to jump to for soft reset
  */
 	.align	5
-ENTRY(cpu_v7m_reset)
+SYM_TYPED_FUNC_START(cpu_v7m_reset)
 	ret	r0
-ENDPROC(cpu_v7m_reset)
+SYM_FUNC_END(cpu_v7m_reset)
 
 /*
  *	cpu_v7m_do_idle()
@@ -42,36 +43,36 @@ ENDPROC(cpu_v7m_reset)
  *
  *	IRQs are already disabled.
  */
-ENTRY(cpu_v7m_do_idle)
+SYM_TYPED_FUNC_START(cpu_v7m_do_idle)
 	wfi
 	ret	lr
-ENDPROC(cpu_v7m_do_idle)
+SYM_FUNC_END(cpu_v7m_do_idle)
 
-ENTRY(cpu_v7m_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_v7m_dcache_clean_area)
 	ret	lr
-ENDPROC(cpu_v7m_dcache_clean_area)
+SYM_FUNC_END(cpu_v7m_dcache_clean_area)
 
 /*
  * There is no MMU, so here is nothing to do.
  */
-ENTRY(cpu_v7m_switch_mm)
+SYM_TYPED_FUNC_START(cpu_v7m_switch_mm)
 	ret	lr
-ENDPROC(cpu_v7m_switch_mm)
+SYM_FUNC_END(cpu_v7m_switch_mm)
 
 .globl	cpu_v7m_suspend_size
 .equ	cpu_v7m_suspend_size, 0
 
 #ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_v7m_do_suspend)
+SYM_TYPED_FUNC_START(cpu_v7m_do_suspend)
 	ret	lr
-ENDPROC(cpu_v7m_do_suspend)
+SYM_FUNC_END(cpu_v7m_do_suspend)
 
-ENTRY(cpu_v7m_do_resume)
+SYM_TYPED_FUNC_START(cpu_v7m_do_resume)
 	ret	lr
-ENDPROC(cpu_v7m_do_resume)
+SYM_FUNC_END(cpu_v7m_do_resume)
 #endif
 
-ENTRY(cpu_cm7_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_cm7_dcache_clean_area)
 	dcache_line_size r2, r3
 	movw	r3, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_DCCMVAC
 	movt	r3, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_DCCMVAC
@@ -82,16 +83,16 @@ ENTRY(cpu_cm7_dcache_clean_area)
 	bhi	1b
 	dsb
 	ret	lr
-ENDPROC(cpu_cm7_dcache_clean_area)
+SYM_FUNC_END(cpu_cm7_dcache_clean_area)
 
-ENTRY(cpu_cm7_proc_fin)
+SYM_TYPED_FUNC_START(cpu_cm7_proc_fin)
 	movw	r2, #:lower16:(BASEADDR_V7M_SCB + V7M_SCB_CCR)
 	movt	r2, #:upper16:(BASEADDR_V7M_SCB + V7M_SCB_CCR)
 	ldr	r0, [r2]
 	bic	r0, r0, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC)
 	str	r0, [r2]
 	ret	lr
-ENDPROC(cpu_cm7_proc_fin)
+SYM_FUNC_END(cpu_cm7_proc_fin)
 
 	.section ".init.text", "ax"
 
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index a17afe7e195a..fd25634a2ed5 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -23,6 +23,7 @@
 
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/hwcap.h>
@@ -79,18 +80,20 @@
  *
  * Nothing too exciting at the moment
  */
-ENTRY(cpu_xsc3_proc_init)
+SYM_TYPED_FUNC_START(cpu_xsc3_proc_init)
 	ret	lr
+SYM_FUNC_END(cpu_xsc3_proc_init)
 
 /*
  * cpu_xsc3_proc_fin()
  */
-ENTRY(cpu_xsc3_proc_fin)
+SYM_TYPED_FUNC_START(cpu_xsc3_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1800			@ ...IZ...........
 	bic	r0, r0, #0x0006			@ .............CA.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
+SYM_FUNC_END(cpu_xsc3_proc_fin)
 
 /*
  * cpu_xsc3_reset(loc)
@@ -103,7 +106,7 @@ ENTRY(cpu_xsc3_proc_fin)
  */
 	.align	5
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_xsc3_reset)
+SYM_TYPED_FUNC_START(cpu_xsc3_reset)
 	mov	r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
 	msr	cpsr_c, r1			@ reset CPSR
 	mrc	p15, 0, r1, c1, c0, 0		@ ctrl register
@@ -117,7 +120,7 @@ ENTRY(cpu_xsc3_reset)
 	@ already containing those two last instructions to survive.
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
 	ret	r0
-ENDPROC(cpu_xsc3_reset)
+SYM_FUNC_END(cpu_xsc3_reset)
 	.popsection
 
 /*
@@ -132,10 +135,11 @@ ENDPROC(cpu_xsc3_reset)
  */
 	.align	5
 
-ENTRY(cpu_xsc3_do_idle)
+SYM_TYPED_FUNC_START(cpu_xsc3_do_idle)
 	mov	r0, #1
 	mcr	p14, 0, r0, c7, c0, 0		@ go to idle
 	ret	lr
+SYM_FUNC_END(cpu_xsc3_do_idle)
 
 /* ================================= CACHE ================================ */
 
@@ -144,11 +148,11 @@ ENTRY(cpu_xsc3_do_idle)
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
-ENTRY(xsc3_flush_icache_all)
+SYM_TYPED_FUNC_START(xsc3_flush_icache_all)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	ret	lr
-ENDPROC(xsc3_flush_icache_all)
+SYM_FUNC_END(xsc3_flush_icache_all)
 
 /*
  *	flush_user_cache_all()
@@ -156,15 +160,14 @@ ENDPROC(xsc3_flush_icache_all)
  *	Invalidate all cache entries in a particular address
  *	space.
  */
-ENTRY(xsc3_flush_user_cache_all)
-	/* FALLTHROUGH */
+SYM_FUNC_ALIAS(xsc3_flush_user_cache_all, xsc3_flush_kern_cache_all)
 
 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
-ENTRY(xsc3_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(xsc3_flush_kern_cache_all)
 	mov	r2, #VM_EXEC
 	mov	ip, #0
 __flush_whole_cache:
@@ -174,6 +177,7 @@ __flush_whole_cache:
 	mcrne	p15, 0, ip, c7, c10, 4		@ data write barrier
 	mcrne	p15, 0, ip, c7, c5, 4		@ prefetch flush
 	ret	lr
+SYM_FUNC_END(xsc3_flush_kern_cache_all)
 
 /*
  *	flush_user_cache_range(start, end, vm_flags)
@@ -186,7 +190,7 @@ __flush_whole_cache:
  *	- vma	- vma_area_struct describing address space
  */
 	.align	5
-ENTRY(xsc3_flush_user_cache_range)
+SYM_TYPED_FUNC_START(xsc3_flush_user_cache_range)
 	mov	ip, #0
 	sub	r3, r1, r0			@ calculate total size
 	cmp	r3, #MAX_AREA_SIZE
@@ -203,6 +207,7 @@ ENTRY(xsc3_flush_user_cache_range)
 	mcrne	p15, 0, ip, c7, c10, 4		@ data write barrier
 	mcrne	p15, 0, ip, c7, c5, 4		@ prefetch flush
 	ret	lr
+SYM_FUNC_END(xsc3_flush_user_cache_range)
 
 /*
  *	coherent_kern_range(start, end)
@@ -217,9 +222,13 @@ ENTRY(xsc3_flush_user_cache_range)
  *	Note: single I-cache line invalidation isn't used here since
  *	it also trashes the mini I-cache used by JTAG debuggers.
  */
-ENTRY(xsc3_coherent_kern_range)
-/* FALLTHROUGH */
-ENTRY(xsc3_coherent_user_range)
+SYM_TYPED_FUNC_START(xsc3_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	xsc3_coherent_user_range
+#endif
+SYM_FUNC_END(xsc3_coherent_kern_range)
+
+SYM_TYPED_FUNC_START(xsc3_coherent_user_range)
 	bic	r0, r0, #CACHELINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
 	add	r0, r0, #CACHELINESIZE
@@ -230,6 +239,7 @@ ENTRY(xsc3_coherent_user_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
 	mcr	p15, 0, r0, c7, c5, 4		@ prefetch flush
 	ret	lr
+SYM_FUNC_END(xsc3_coherent_user_range)
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -240,7 +250,7 @@ ENTRY(xsc3_coherent_user_range)
  *	- addr	- kernel address
  *	- size	- region size
  */
-ENTRY(xsc3_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(xsc3_flush_kern_dcache_area)
 	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean/invalidate L1 D line
 	add	r0, r0, #CACHELINESIZE
@@ -251,6 +261,7 @@ ENTRY(xsc3_flush_kern_dcache_area)
 	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
 	mcr	p15, 0, r0, c7, c5, 4		@ prefetch flush
 	ret	lr
+SYM_FUNC_END(xsc3_flush_kern_dcache_area)
 
 /*
  *	dma_inv_range(start, end)
@@ -301,7 +312,7 @@ xsc3_dma_clean_range:
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(xsc3_dma_flush_range)
+SYM_TYPED_FUNC_START(xsc3_dma_flush_range)
 	bic	r0, r0, #CACHELINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean/invalidate L1 D line
 	add	r0, r0, #CACHELINESIZE
@@ -309,6 +320,7 @@ ENTRY(xsc3_dma_flush_range)
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
 	ret	lr
+SYM_FUNC_END(xsc3_dma_flush_range)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -316,13 +328,13 @@ ENTRY(xsc3_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(xsc3_dma_map_area)
+SYM_TYPED_FUNC_START(xsc3_dma_map_area)
 	add	r1, r1, r0
 	cmp	r2, #DMA_TO_DEVICE
 	beq	xsc3_dma_clean_range
 	bcs	xsc3_dma_inv_range
 	b	xsc3_dma_flush_range
-ENDPROC(xsc3_dma_map_area)
+SYM_FUNC_END(xsc3_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -330,22 +342,17 @@ ENDPROC(xsc3_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(xsc3_dma_unmap_area)
+SYM_TYPED_FUNC_START(xsc3_dma_unmap_area)
 	ret	lr
-ENDPROC(xsc3_dma_unmap_area)
-
-	.globl	xsc3_flush_kern_cache_louis
-	.equ	xsc3_flush_kern_cache_louis, xsc3_flush_kern_cache_all
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions xsc3
+SYM_FUNC_END(xsc3_dma_unmap_area)
 
-ENTRY(cpu_xsc3_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_xsc3_dcache_clean_area)
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
 	add	r0, r0, #CACHELINESIZE
 	subs	r1, r1, #CACHELINESIZE
 	bhi	1b
 	ret	lr
+SYM_FUNC_END(cpu_xsc3_dcache_clean_area)
 
 /* =============================== PageTable ============================== */
 
@@ -357,7 +364,7 @@ ENTRY(cpu_xsc3_dcache_clean_area)
  * pgd: new page tables
  */
 	.align	5
-ENTRY(cpu_xsc3_switch_mm)
+SYM_TYPED_FUNC_START(cpu_xsc3_switch_mm)
 	clean_d_cache r1, r2
 	mcr	p15, 0, ip, c7, c5, 0		@ invalidate L1 I cache and BTB
 	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
@@ -366,6 +373,7 @@ ENTRY(cpu_xsc3_switch_mm)
 	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
 	cpwait_ret lr, ip
+SYM_FUNC_END(cpu_xsc3_switch_mm)
 
 /*
  * cpu_xsc3_set_pte_ext(ptep, pte, ext)
@@ -391,7 +399,7 @@ cpu_xsc3_mt_table:
 	.long	0x00						@ unused
 
 	.align	5
-ENTRY(cpu_xsc3_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_xsc3_set_pte_ext)
 	xscale_set_pte_ext_prologue
 
 	tst	r1, #L_PTE_SHARED		@ shared?
@@ -404,6 +412,7 @@ ENTRY(cpu_xsc3_set_pte_ext)
 
 	xscale_set_pte_ext_epilogue
 	ret	lr
+SYM_FUNC_END(cpu_xsc3_set_pte_ext)
 
 	.ltorg
 	.align
@@ -411,7 +420,7 @@ ENTRY(cpu_xsc3_set_pte_ext)
 .globl	cpu_xsc3_suspend_size
 .equ	cpu_xsc3_suspend_size, 4 * 6
 #ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_xsc3_do_suspend)
+SYM_TYPED_FUNC_START(cpu_xsc3_do_suspend)
 	stmfd	sp!, {r4 - r9, lr}
 	mrc	p14, 0, r4, c6, c0, 0	@ clock configuration, for turbo mode
 	mrc	p15, 0, r5, c15, c1, 0	@ CP access reg
@@ -422,9 +431,9 @@ ENTRY(cpu_xsc3_do_suspend)
 	bic	r4, r4, #2		@ clear frequency change bit
 	stmia	r0, {r4 - r9}		@ store cp regs
 	ldmia	sp!, {r4 - r9, pc}
-ENDPROC(cpu_xsc3_do_suspend)
+SYM_FUNC_END(cpu_xsc3_do_suspend)
 
-ENTRY(cpu_xsc3_do_resume)
+SYM_TYPED_FUNC_START(cpu_xsc3_do_resume)
 	ldmia	r0, {r4 - r9}		@ load cp regs
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0	@ invalidate I & D caches, BTB
@@ -440,7 +449,7 @@ ENTRY(cpu_xsc3_do_resume)
 	mcr	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
 	mov	r0, r9			@ control register
 	b	cpu_resume_mmu
-ENDPROC(cpu_xsc3_do_resume)
+SYM_FUNC_END(cpu_xsc3_do_resume)
 #endif
 
 	.type	__xsc3_setup, #function
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index d82590aa71c0..d8462df8020b 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -19,6 +19,7 @@
 
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <linux/pgtable.h>
 #include <asm/assembler.h>
 #include <asm/hwcap.h>
@@ -111,22 +112,24 @@ clean_addr:	.word	CLEAN_ADDR
  *
  * Nothing too exciting at the moment
  */
-ENTRY(cpu_xscale_proc_init)
+SYM_TYPED_FUNC_START(cpu_xscale_proc_init)
 	@ enable write buffer coalescing. Some bootloader disable it
 	mrc	p15, 0, r1, c1, c0, 1
 	bic	r1, r1, #1
 	mcr	p15, 0, r1, c1, c0, 1
 	ret	lr
+SYM_FUNC_END(cpu_xscale_proc_init)
 
 /*
  * cpu_xscale_proc_fin()
  */
-ENTRY(cpu_xscale_proc_fin)
+SYM_TYPED_FUNC_START(cpu_xscale_proc_fin)
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1800			@ ...IZ...........
 	bic	r0, r0, #0x0006			@ .............CA.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	ret	lr
+SYM_FUNC_END(cpu_xscale_proc_fin)
 
 /*
  * cpu_xscale_reset(loc)
@@ -141,7 +144,7 @@ ENTRY(cpu_xscale_proc_fin)
  */
 	.align	5
 	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_xscale_reset)
+SYM_TYPED_FUNC_START(cpu_xscale_reset)
 	mov	r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
 	msr	cpsr_c, r1			@ reset CPSR
 	mcr	p15, 0, r1, c10, c4, 1		@ unlock I-TLB
@@ -159,7 +162,7 @@ ENTRY(cpu_xscale_reset)
 	@ already containing those two last instructions to survive.
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
 	ret	r0
-ENDPROC(cpu_xscale_reset)
+SYM_FUNC_END(cpu_xscale_reset)
 	.popsection
 
 /*
@@ -174,10 +177,11 @@ ENDPROC(cpu_xscale_reset)
  */
 	.align	5
 
-ENTRY(cpu_xscale_do_idle)
+SYM_TYPED_FUNC_START(cpu_xscale_do_idle)
 	mov	r0, #1
 	mcr	p14, 0, r0, c7, c0, 0		@ Go to IDLE
 	ret	lr
+SYM_FUNC_END(cpu_xscale_do_idle)
 
 /* ================================= CACHE ================================ */
 
@@ -186,11 +190,11 @@ ENTRY(cpu_xscale_do_idle)
  *
  *	Unconditionally clean and invalidate the entire icache.
  */
-ENTRY(xscale_flush_icache_all)
+SYM_TYPED_FUNC_START(xscale_flush_icache_all)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	ret	lr
-ENDPROC(xscale_flush_icache_all)
+SYM_FUNC_END(xscale_flush_icache_all)
 
 /*
  *	flush_user_cache_all()
@@ -198,15 +202,14 @@ ENDPROC(xscale_flush_icache_all)
  *	Invalidate all cache entries in a particular address
  *	space.
  */
-ENTRY(xscale_flush_user_cache_all)
-	/* FALLTHROUGH */
+SYM_FUNC_ALIAS(xscale_flush_user_cache_all, xscale_flush_kern_cache_all)
 
 /*
  *	flush_kern_cache_all()
  *
  *	Clean and invalidate the entire cache.
  */
-ENTRY(xscale_flush_kern_cache_all)
+SYM_TYPED_FUNC_START(xscale_flush_kern_cache_all)
 	mov	r2, #VM_EXEC
 	mov	ip, #0
 __flush_whole_cache:
@@ -215,6 +218,7 @@ __flush_whole_cache:
 	mcrne	p15, 0, ip, c7, c5, 0		@ Invalidate I cache & BTB
 	mcrne	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
 	ret	lr
+SYM_FUNC_END(xscale_flush_kern_cache_all)
 
 /*
  *	flush_user_cache_range(start, end, vm_flags)
@@ -227,7 +231,7 @@ __flush_whole_cache:
  *	- vma	- vma_area_struct describing address space
  */
 	.align	5
-ENTRY(xscale_flush_user_cache_range)
+SYM_TYPED_FUNC_START(xscale_flush_user_cache_range)
 	mov	ip, #0
 	sub	r3, r1, r0			@ calculate total size
 	cmp	r3, #MAX_AREA_SIZE
@@ -244,6 +248,7 @@ ENTRY(xscale_flush_user_cache_range)
 	mcrne	p15, 0, ip, c7, c5, 6		@ Invalidate BTB
 	mcrne	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
 	ret	lr
+SYM_FUNC_END(xscale_flush_user_cache_range)
 
 /*
  *	coherent_kern_range(start, end)
@@ -258,7 +263,7 @@ ENTRY(xscale_flush_user_cache_range)
  *	Note: single I-cache line invalidation isn't used here since
  *	it also trashes the mini I-cache used by JTAG debuggers.
  */
-ENTRY(xscale_coherent_kern_range)
+SYM_TYPED_FUNC_START(xscale_coherent_kern_range)
 	bic	r0, r0, #CACHELINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHELINESIZE
@@ -268,6 +273,7 @@ ENTRY(xscale_coherent_kern_range)
 	mcr	p15, 0, r0, c7, c5, 0		@ Invalidate I cache & BTB
 	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
 	ret	lr
+SYM_FUNC_END(xscale_coherent_kern_range)
 
 /*
  *	coherent_user_range(start, end)
@@ -279,7 +285,7 @@ ENTRY(xscale_coherent_kern_range)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(xscale_coherent_user_range)
+SYM_TYPED_FUNC_START(xscale_coherent_user_range)
 	bic	r0, r0, #CACHELINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c5, 1		@ Invalidate I cache entry
@@ -290,6 +296,7 @@ ENTRY(xscale_coherent_user_range)
 	mcr	p15, 0, r0, c7, c5, 6		@ Invalidate BTB
 	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
 	ret	lr
+SYM_FUNC_END(xscale_coherent_user_range)
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -300,7 +307,7 @@ ENTRY(xscale_coherent_user_range)
  *	- addr	- kernel address
  *	- size	- region size
  */
-ENTRY(xscale_flush_kern_dcache_area)
+SYM_TYPED_FUNC_START(xscale_flush_kern_dcache_area)
 	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
@@ -311,6 +318,7 @@ ENTRY(xscale_flush_kern_dcache_area)
 	mcr	p15, 0, r0, c7, c5, 0		@ Invalidate I cache & BTB
 	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
 	ret	lr
+SYM_FUNC_END(xscale_flush_kern_dcache_area)
 
 /*
  *	dma_inv_range(start, end)
@@ -361,7 +369,7 @@ xscale_dma_clean_range:
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(xscale_dma_flush_range)
+SYM_TYPED_FUNC_START(xscale_dma_flush_range)
 	bic	r0, r0, #CACHELINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
@@ -370,6 +378,7 @@ ENTRY(xscale_dma_flush_range)
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
 	ret	lr
+SYM_FUNC_END(xscale_dma_flush_range)
 
 /*
  *	dma_map_area(start, size, dir)
@@ -377,13 +386,27 @@ ENTRY(xscale_dma_flush_range)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(xscale_dma_map_area)
+SYM_TYPED_FUNC_START(xscale_dma_map_area)
 	add	r1, r1, r0
 	cmp	r2, #DMA_TO_DEVICE
 	beq	xscale_dma_clean_range
 	bcs	xscale_dma_inv_range
 	b	xscale_dma_flush_range
-ENDPROC(xscale_dma_map_area)
+SYM_FUNC_END(xscale_dma_map_area)
+
+/*
+ * On stepping A0/A1 of the 80200, invalidating D-cache by line doesn't
+ * clear the dirty bits, which means that if we invalidate a dirty line,
+ * the dirty data can still be written back to external memory later on.
+ *
+ * The recommended workaround is to always do a clean D-cache line before
+ * doing an invalidate D-cache line, so on the affected processors,
+ * dma_inv_range() is implemented as dma_flush_range().
+ *
+ * See erratum #25 of "Intel 80200 Processor Specification Update",
+ * revision January 22, 2003, available at:
+ *     http://www.intel.com/design/iio/specupdt/273415.htm
+ */
 
 /*
  *	dma_map_area(start, size, dir)
@@ -391,12 +414,12 @@ ENDPROC(xscale_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(xscale_80200_A0_A1_dma_map_area)
+SYM_TYPED_FUNC_START(xscale_80200_A0_A1_dma_map_area)
 	add	r1, r1, r0
 	teq	r2, #DMA_TO_DEVICE
 	beq	xscale_dma_clean_range
 	b	xscale_dma_flush_range
-ENDPROC(xscale_80200_A0_A1_dma_map_area)
+SYM_FUNC_END(xscale_80200_A0_A1_dma_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -404,59 +427,17 @@ ENDPROC(xscale_80200_A0_A1_dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-ENTRY(xscale_dma_unmap_area)
+SYM_TYPED_FUNC_START(xscale_dma_unmap_area)
 	ret	lr
-ENDPROC(xscale_dma_unmap_area)
-
-	.globl	xscale_flush_kern_cache_louis
-	.equ	xscale_flush_kern_cache_louis, xscale_flush_kern_cache_all
+SYM_FUNC_END(xscale_dma_unmap_area)
 
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions xscale
-
-/*
- * On stepping A0/A1 of the 80200, invalidating D-cache by line doesn't
- * clear the dirty bits, which means that if we invalidate a dirty line,
- * the dirty data can still be written back to external memory later on.
- *
- * The recommended workaround is to always do a clean D-cache line before
- * doing an invalidate D-cache line, so on the affected processors,
- * dma_inv_range() is implemented as dma_flush_range().
- *
- * See erratum #25 of "Intel 80200 Processor Specification Update",
- * revision January 22, 2003, available at:
- *     http://www.intel.com/design/iio/specupdt/273415.htm
- */
-.macro a0_alias basename
-	.globl xscale_80200_A0_A1_\basename
-	.type xscale_80200_A0_A1_\basename , %function
-	.equ xscale_80200_A0_A1_\basename , xscale_\basename
-.endm
-
-/*
- * Most of the cache functions are unchanged for these processor revisions.
- * Export suitable alias symbols for the unchanged functions:
- */
-	a0_alias flush_icache_all
-	a0_alias flush_user_cache_all
-	a0_alias flush_kern_cache_all
-	a0_alias flush_kern_cache_louis
-	a0_alias flush_user_cache_range
-	a0_alias coherent_kern_range
-	a0_alias coherent_user_range
-	a0_alias flush_kern_dcache_area
-	a0_alias dma_flush_range
-	a0_alias dma_unmap_area
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions xscale_80200_A0_A1
-
-ENTRY(cpu_xscale_dcache_clean_area)
+SYM_TYPED_FUNC_START(cpu_xscale_dcache_clean_area)
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHELINESIZE
 	subs	r1, r1, #CACHELINESIZE
 	bhi	1b
 	ret	lr
+SYM_FUNC_END(cpu_xscale_dcache_clean_area)
 
 /* =============================== PageTable ============================== */
 
@@ -468,13 +449,14 @@ ENTRY(cpu_xscale_dcache_clean_area)
  * pgd: new page tables
  */
 	.align	5
-ENTRY(cpu_xscale_switch_mm)
+SYM_TYPED_FUNC_START(cpu_xscale_switch_mm)
 	clean_d_cache r1, r2
 	mcr	p15, 0, ip, c7, c5, 0		@ Invalidate I cache & BTB
 	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
 	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
 	cpwait_ret lr, ip
+SYM_FUNC_END(cpu_xscale_switch_mm)
 
 /*
  * cpu_xscale_set_pte_ext(ptep, pte, ext)
@@ -502,7 +484,7 @@ cpu_xscale_mt_table:
 	.long	0x00						@ unused
 
 	.align	5
-ENTRY(cpu_xscale_set_pte_ext)
+SYM_TYPED_FUNC_START(cpu_xscale_set_pte_ext)
 	xscale_set_pte_ext_prologue
 
 	@
@@ -520,6 +502,7 @@ ENTRY(cpu_xscale_set_pte_ext)
 
 	xscale_set_pte_ext_epilogue
 	ret	lr
+SYM_FUNC_END(cpu_xscale_set_pte_ext)
 
 	.ltorg
 	.align
@@ -527,7 +510,7 @@ ENTRY(cpu_xscale_set_pte_ext)
 .globl	cpu_xscale_suspend_size
 .equ	cpu_xscale_suspend_size, 4 * 6
 #ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_xscale_do_suspend)
+SYM_TYPED_FUNC_START(cpu_xscale_do_suspend)
 	stmfd	sp!, {r4 - r9, lr}
 	mrc	p14, 0, r4, c6, c0, 0	@ clock configuration, for turbo mode
 	mrc	p15, 0, r5, c15, c1, 0	@ CP access reg
@@ -538,9 +521,9 @@ ENTRY(cpu_xscale_do_suspend)
 	bic	r4, r4, #2		@ clear frequency change bit
 	stmia	r0, {r4 - r9}		@ store cp regs
 	ldmfd	sp!, {r4 - r9, pc}
-ENDPROC(cpu_xscale_do_suspend)
+SYM_FUNC_END(cpu_xscale_do_suspend)
 
-ENTRY(cpu_xscale_do_resume)
+SYM_TYPED_FUNC_START(cpu_xscale_do_resume)
 	ldmia	r0, {r4 - r9}		@ load cp regs
 	mov	ip, #0
 	mcr	p15, 0, ip, c8, c7, 0	@ invalidate I & D TLBs
@@ -553,7 +536,7 @@ ENTRY(cpu_xscale_do_resume)
 	mcr	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
 	mov	r0, r9			@ control register
 	b	cpu_resume_mmu
-ENDPROC(cpu_xscale_do_resume)
+SYM_FUNC_END(cpu_xscale_do_resume)
 #endif
 
 	.type	__xscale_setup, #function
diff --git a/arch/arm/mm/proc.c b/arch/arm/mm/proc.c
new file mode 100644
index 000000000000..2027845efefb
--- /dev/null
+++ b/arch/arm/mm/proc.c
@@ -0,0 +1,500 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * This file defines C prototypes for the low-level processor assembly functions
+ * and creates a reference for CFI. This needs to be done for every assembly
+ * processor ("proc") function that is called from C but does not have a
+ * corresponding C implementation.
+ *
+ * Processors are listed in the order they appear in the Makefile.
+ *
+ * Functions are listed if and only if they see use on the target CPU, and in
+ * the order they are defined in struct processor.
+ */
+#include <asm/proc-fns.h>
+
+#ifdef CONFIG_CPU_ARM7TDMI
+void cpu_arm7tdmi_proc_init(void);
+__ADDRESSABLE(cpu_arm7tdmi_proc_init);
+void cpu_arm7tdmi_proc_fin(void);
+__ADDRESSABLE(cpu_arm7tdmi_proc_fin);
+void cpu_arm7tdmi_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_arm7tdmi_reset);
+int cpu_arm7tdmi_do_idle(void);
+__ADDRESSABLE(cpu_arm7tdmi_do_idle);
+void cpu_arm7tdmi_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_arm7tdmi_dcache_clean_area);
+void cpu_arm7tdmi_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_arm7tdmi_switch_mm);
+#endif
+
+#ifdef CONFIG_CPU_ARM720T
+void cpu_arm720_proc_init(void);
+__ADDRESSABLE(cpu_arm720_proc_init);
+void cpu_arm720_proc_fin(void);
+__ADDRESSABLE(cpu_arm720_proc_fin);
+void cpu_arm720_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_arm720_reset);
+int cpu_arm720_do_idle(void);
+__ADDRESSABLE(cpu_arm720_do_idle);
+void cpu_arm720_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_arm720_dcache_clean_area);
+void cpu_arm720_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_arm720_switch_mm);
+void cpu_arm720_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+__ADDRESSABLE(cpu_arm720_set_pte_ext);
+#endif
+
+#ifdef CONFIG_CPU_ARM740T
+void cpu_arm740_proc_init(void);
+__ADDRESSABLE(cpu_arm740_proc_init);
+void cpu_arm740_proc_fin(void);
+__ADDRESSABLE(cpu_arm740_proc_fin);
+void cpu_arm740_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_arm740_reset);
+int cpu_arm740_do_idle(void);
+__ADDRESSABLE(cpu_arm740_do_idle);
+void cpu_arm740_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_arm740_dcache_clean_area);
+void cpu_arm740_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_arm740_switch_mm);
+#endif
+
+#ifdef CONFIG_CPU_ARM9TDMI
+void cpu_arm9tdmi_proc_init(void);
+__ADDRESSABLE(cpu_arm9tdmi_proc_init);
+void cpu_arm9tdmi_proc_fin(void);
+__ADDRESSABLE(cpu_arm9tdmi_proc_fin);
+void cpu_arm9tdmi_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_arm9tdmi_reset);
+int cpu_arm9tdmi_do_idle(void);
+__ADDRESSABLE(cpu_arm9tdmi_do_idle);
+void cpu_arm9tdmi_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_arm9tdmi_dcache_clean_area);
+void cpu_arm9tdmi_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_arm9tdmi_switch_mm);
+#endif
+
+#ifdef CONFIG_CPU_ARM920T
+void cpu_arm920_proc_init(void);
+__ADDRESSABLE(cpu_arm920_proc_init);
+void cpu_arm920_proc_fin(void);
+__ADDRESSABLE(cpu_arm920_proc_fin);
+void cpu_arm920_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_arm920_reset);
+int cpu_arm920_do_idle(void);
+__ADDRESSABLE(cpu_arm920_do_idle);
+void cpu_arm920_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_arm920_dcache_clean_area);
+void cpu_arm920_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_arm920_switch_mm);
+void cpu_arm920_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+__ADDRESSABLE(cpu_arm920_set_pte_ext);
+#ifdef CONFIG_ARM_CPU_SUSPEND
+void cpu_arm920_do_suspend(void *);
+__ADDRESSABLE(cpu_arm920_do_suspend);
+void cpu_arm920_do_resume(void *);
+__ADDRESSABLE(cpu_arm920_do_resume);
+#endif /* CONFIG_ARM_CPU_SUSPEND */
+#endif /* CONFIG_CPU_ARM920T */
+
+#ifdef CONFIG_CPU_ARM922T
+void cpu_arm922_proc_init(void);
+__ADDRESSABLE(cpu_arm922_proc_init);
+void cpu_arm922_proc_fin(void);
+__ADDRESSABLE(cpu_arm922_proc_fin);
+void cpu_arm922_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_arm922_reset);
+int cpu_arm922_do_idle(void);
+__ADDRESSABLE(cpu_arm922_do_idle);
+void cpu_arm922_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_arm922_dcache_clean_area);
+void cpu_arm922_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_arm922_switch_mm);
+void cpu_arm922_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+__ADDRESSABLE(cpu_arm922_set_pte_ext);
+#endif
+
+#ifdef CONFIG_CPU_ARM925T
+void cpu_arm925_proc_init(void);
+__ADDRESSABLE(cpu_arm925_proc_init);
+void cpu_arm925_proc_fin(void);
+__ADDRESSABLE(cpu_arm925_proc_fin);
+void cpu_arm925_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_arm925_reset);
+int cpu_arm925_do_idle(void);
+__ADDRESSABLE(cpu_arm925_do_idle);
+void cpu_arm925_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_arm925_dcache_clean_area);
+void cpu_arm925_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_arm925_switch_mm);
+void cpu_arm925_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+__ADDRESSABLE(cpu_arm925_set_pte_ext);
+#endif
+
+#ifdef CONFIG_CPU_ARM926T
+void cpu_arm926_proc_init(void);
+__ADDRESSABLE(cpu_arm926_proc_init);
+void cpu_arm926_proc_fin(void);
+__ADDRESSABLE(cpu_arm926_proc_fin);
+void cpu_arm926_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_arm926_reset);
+int cpu_arm926_do_idle(void);
+__ADDRESSABLE(cpu_arm926_do_idle);
+void cpu_arm926_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_arm926_dcache_clean_area);
+void cpu_arm926_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_arm926_switch_mm);
+void cpu_arm926_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+__ADDRESSABLE(cpu_arm926_set_pte_ext);
+#ifdef CONFIG_ARM_CPU_SUSPEND
+void cpu_arm926_do_suspend(void *);
+__ADDRESSABLE(cpu_arm926_do_suspend);
+void cpu_arm926_do_resume(void *);
+__ADDRESSABLE(cpu_arm926_do_resume);
+#endif /* CONFIG_ARM_CPU_SUSPEND */
+#endif /* CONFIG_CPU_ARM926T */
+
+#ifdef CONFIG_CPU_ARM940T
+void cpu_arm940_proc_init(void);
+__ADDRESSABLE(cpu_arm940_proc_init);
+void cpu_arm940_proc_fin(void);
+__ADDRESSABLE(cpu_arm940_proc_fin);
+void cpu_arm940_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_arm940_reset);
+int cpu_arm940_do_idle(void);
+__ADDRESSABLE(cpu_arm940_do_idle);
+void cpu_arm940_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_arm940_dcache_clean_area);
+void cpu_arm940_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_arm940_switch_mm);
+#endif
+
+#ifdef CONFIG_CPU_ARM946E
+void cpu_arm946_proc_init(void);
+__ADDRESSABLE(cpu_arm946_proc_init);
+void cpu_arm946_proc_fin(void);
+__ADDRESSABLE(cpu_arm946_proc_fin);
+void cpu_arm946_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_arm946_reset);
+int cpu_arm946_do_idle(void);
+__ADDRESSABLE(cpu_arm946_do_idle);
+void cpu_arm946_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_arm946_dcache_clean_area);
+void cpu_arm946_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_arm946_switch_mm);
+#endif
+
+#ifdef CONFIG_CPU_FA526
+void cpu_fa526_proc_init(void);
+__ADDRESSABLE(cpu_fa526_proc_init);
+void cpu_fa526_proc_fin(void);
+__ADDRESSABLE(cpu_fa526_proc_fin);
+void cpu_fa526_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_fa526_reset);
+int cpu_fa526_do_idle(void);
+__ADDRESSABLE(cpu_fa526_do_idle);
+void cpu_fa526_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_fa526_dcache_clean_area);
+void cpu_fa526_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_fa526_switch_mm);
+void cpu_fa526_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+__ADDRESSABLE(cpu_fa526_set_pte_ext);
+#endif
+
+#ifdef CONFIG_CPU_ARM1020
+void cpu_arm1020_proc_init(void);
+__ADDRESSABLE(cpu_arm1020_proc_init);
+void cpu_arm1020_proc_fin(void);
+__ADDRESSABLE(cpu_arm1020_proc_fin);
+void cpu_arm1020_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_arm1020_reset);
+int cpu_arm1020_do_idle(void);
+__ADDRESSABLE(cpu_arm1020_do_idle);
+void cpu_arm1020_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_arm1020_dcache_clean_area);
+void cpu_arm1020_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_arm1020_switch_mm);
+void cpu_arm1020_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+__ADDRESSABLE(cpu_arm1020_set_pte_ext);
+#endif
+
+#ifdef CONFIG_CPU_ARM1020E
+void cpu_arm1020e_proc_init(void);
+__ADDRESSABLE(cpu_arm1020e_proc_init);
+void cpu_arm1020e_proc_fin(void);
+__ADDRESSABLE(cpu_arm1020e_proc_fin);
+void cpu_arm1020e_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_arm1020e_reset);
+int cpu_arm1020e_do_idle(void);
+__ADDRESSABLE(cpu_arm1020e_do_idle);
+void cpu_arm1020e_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_arm1020e_dcache_clean_area);
+void cpu_arm1020e_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_arm1020e_switch_mm);
+void cpu_arm1020e_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+__ADDRESSABLE(cpu_arm1020e_set_pte_ext);
+#endif
+
+#ifdef CONFIG_CPU_ARM1022
+void cpu_arm1022_proc_init(void);
+__ADDRESSABLE(cpu_arm1022_proc_init);
+void cpu_arm1022_proc_fin(void);
+__ADDRESSABLE(cpu_arm1022_proc_fin);
+void cpu_arm1022_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_arm1022_reset);
+int cpu_arm1022_do_idle(void);
+__ADDRESSABLE(cpu_arm1022_do_idle);
+void cpu_arm1022_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_arm1022_dcache_clean_area);
+void cpu_arm1022_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_arm1022_switch_mm);
+void cpu_arm1022_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+__ADDRESSABLE(cpu_arm1022_set_pte_ext);
+#endif
+
+#ifdef CONFIG_CPU_ARM1026
+void cpu_arm1026_proc_init(void);
+__ADDRESSABLE(cpu_arm1026_proc_init);
+void cpu_arm1026_proc_fin(void);
+__ADDRESSABLE(cpu_arm1026_proc_fin);
+void cpu_arm1026_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_arm1026_reset);
+int cpu_arm1026_do_idle(void);
+__ADDRESSABLE(cpu_arm1026_do_idle);
+void cpu_arm1026_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_arm1026_dcache_clean_area);
+void cpu_arm1026_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_arm1026_switch_mm);
+void cpu_arm1026_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+__ADDRESSABLE(cpu_arm1026_set_pte_ext);
+#endif
+
+#ifdef CONFIG_CPU_SA110
+void cpu_sa110_proc_init(void);
+__ADDRESSABLE(cpu_sa110_proc_init);
+void cpu_sa110_proc_fin(void);
+__ADDRESSABLE(cpu_sa110_proc_fin);
+void cpu_sa110_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_sa110_reset);
+int cpu_sa110_do_idle(void);
+__ADDRESSABLE(cpu_sa110_do_idle);
+void cpu_sa110_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_sa110_dcache_clean_area);
+void cpu_sa110_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_sa110_switch_mm);
+void cpu_sa110_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+__ADDRESSABLE(cpu_sa110_set_pte_ext);
+#endif
+
+#ifdef CONFIG_CPU_SA1100
+void cpu_sa1100_proc_init(void);
+__ADDRESSABLE(cpu_sa1100_proc_init);
+void cpu_sa1100_proc_fin(void);
+__ADDRESSABLE(cpu_sa1100_proc_fin);
+void cpu_sa1100_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_sa1100_reset);
+int cpu_sa1100_do_idle(void);
+__ADDRESSABLE(cpu_sa1100_do_idle);
+void cpu_sa1100_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_sa1100_dcache_clean_area);
+void cpu_sa1100_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_sa1100_switch_mm);
+void cpu_sa1100_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+__ADDRESSABLE(cpu_sa1100_set_pte_ext);
+#ifdef CONFIG_ARM_CPU_SUSPEND
+void cpu_sa1100_do_suspend(void *);
+__ADDRESSABLE(cpu_sa1100_do_suspend);
+void cpu_sa1100_do_resume(void *);
+__ADDRESSABLE(cpu_sa1100_do_resume);
+#endif /* CONFIG_ARM_CPU_SUSPEND */
+#endif /* CONFIG_CPU_SA1100 */
+
+#ifdef CONFIG_CPU_XSCALE
+void cpu_xscale_proc_init(void);
+__ADDRESSABLE(cpu_xscale_proc_init);
+void cpu_xscale_proc_fin(void);
+__ADDRESSABLE(cpu_xscale_proc_fin);
+void cpu_xscale_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_xscale_reset);
+int cpu_xscale_do_idle(void);
+__ADDRESSABLE(cpu_xscale_do_idle);
+void cpu_xscale_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_xscale_dcache_clean_area);
+void cpu_xscale_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_xscale_switch_mm);
+void cpu_xscale_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+__ADDRESSABLE(cpu_xscale_set_pte_ext);
+#ifdef CONFIG_ARM_CPU_SUSPEND
+void cpu_xscale_do_suspend(void *);
+__ADDRESSABLE(cpu_xscale_do_suspend);
+void cpu_xscale_do_resume(void *);
+__ADDRESSABLE(cpu_xscale_do_resume);
+#endif /* CONFIG_ARM_CPU_SUSPEND */
+#endif /* CONFIG_CPU_XSCALE */
+
+#ifdef CONFIG_CPU_XSC3
+void cpu_xsc3_proc_init(void);
+__ADDRESSABLE(cpu_xsc3_proc_init);
+void cpu_xsc3_proc_fin(void);
+__ADDRESSABLE(cpu_xsc3_proc_fin);
+void cpu_xsc3_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_xsc3_reset);
+int cpu_xsc3_do_idle(void);
+__ADDRESSABLE(cpu_xsc3_do_idle);
+void cpu_xsc3_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_xsc3_dcache_clean_area);
+void cpu_xsc3_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_xsc3_switch_mm);
+void cpu_xsc3_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+__ADDRESSABLE(cpu_xsc3_set_pte_ext);
+#ifdef CONFIG_ARM_CPU_SUSPEND
+void cpu_xsc3_do_suspend(void *);
+__ADDRESSABLE(cpu_xsc3_do_suspend);
+void cpu_xsc3_do_resume(void *);
+__ADDRESSABLE(cpu_xsc3_do_resume);
+#endif /* CONFIG_ARM_CPU_SUSPEND */
+#endif /* CONFIG_CPU_XSC3 */
+
+#ifdef CONFIG_CPU_MOHAWK
+void cpu_mohawk_proc_init(void);
+__ADDRESSABLE(cpu_mohawk_proc_init);
+void cpu_mohawk_proc_fin(void);
+__ADDRESSABLE(cpu_mohawk_proc_fin);
+void cpu_mohawk_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_mohawk_reset);
+int cpu_mohawk_do_idle(void);
+__ADDRESSABLE(cpu_mohawk_do_idle);
+void cpu_mohawk_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_mohawk_dcache_clean_area);
+void cpu_mohawk_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_mohawk_switch_mm);
+void cpu_mohawk_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+__ADDRESSABLE(cpu_mohawk_set_pte_ext);
+#ifdef CONFIG_ARM_CPU_SUSPEND
+void cpu_mohawk_do_suspend(void *);
+__ADDRESSABLE(cpu_mohawk_do_suspend);
+void cpu_mohawk_do_resume(void *);
+__ADDRESSABLE(cpu_mohawk_do_resume);
+#endif /* CONFIG_ARM_CPU_SUSPEND */
+#endif /* CONFIG_CPU_MOHAWK */
+
+#ifdef CONFIG_CPU_FEROCEON
+void cpu_feroceon_proc_init(void);
+__ADDRESSABLE(cpu_feroceon_proc_init);
+void cpu_feroceon_proc_fin(void);
+__ADDRESSABLE(cpu_feroceon_proc_fin);
+void cpu_feroceon_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_feroceon_reset);
+int cpu_feroceon_do_idle(void);
+__ADDRESSABLE(cpu_feroceon_do_idle);
+void cpu_feroceon_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_feroceon_dcache_clean_area);
+void cpu_feroceon_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_feroceon_switch_mm);
+void cpu_feroceon_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+__ADDRESSABLE(cpu_feroceon_set_pte_ext);
+#ifdef CONFIG_ARM_CPU_SUSPEND
+void cpu_feroceon_do_suspend(void *);
+__ADDRESSABLE(cpu_feroceon_do_suspend);
+void cpu_feroceon_do_resume(void *);
+__ADDRESSABLE(cpu_feroceon_do_resume);
+#endif /* CONFIG_ARM_CPU_SUSPEND */
+#endif /* CONFIG_CPU_FEROCEON */
+
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+void cpu_v6_proc_init(void);
+__ADDRESSABLE(cpu_v6_proc_init);
+void cpu_v6_proc_fin(void);
+__ADDRESSABLE(cpu_v6_proc_fin);
+void cpu_v6_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_v6_reset);
+int cpu_v6_do_idle(void);
+__ADDRESSABLE(cpu_v6_do_idle);
+void cpu_v6_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_v6_dcache_clean_area);
+void cpu_v6_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_v6_switch_mm);
+void cpu_v6_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+__ADDRESSABLE(cpu_v6_set_pte_ext);
+#ifdef CONFIG_ARM_CPU_SUSPEND
+void cpu_v6_do_suspend(void *);
+__ADDRESSABLE(cpu_v6_do_suspend);
+void cpu_v6_do_resume(void *);
+__ADDRESSABLE(cpu_v6_do_resume);
+#endif /* CONFIG_ARM_CPU_SUSPEND */
+#endif /* CPU_V6 */
+
+#ifdef CONFIG_CPU_V7
+void cpu_v7_proc_init(void);
+__ADDRESSABLE(cpu_v7_proc_init);
+void cpu_v7_proc_fin(void);
+__ADDRESSABLE(cpu_v7_proc_fin);
+void cpu_v7_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_v7_reset);
+int cpu_v7_do_idle(void);
+__ADDRESSABLE(cpu_v7_do_idle);
+#ifdef CONFIG_PJ4B_ERRATA_4742
+int cpu_pj4b_do_idle(void);
+__ADDRESSABLE(cpu_pj4b_do_idle);
+#endif
+void cpu_v7_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_v7_dcache_clean_area);
+void cpu_v7_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+/* Special switch_mm() callbacks to work around bugs in v7 */
+__ADDRESSABLE(cpu_v7_switch_mm);
+void cpu_v7_iciallu_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_v7_iciallu_switch_mm);
+void cpu_v7_bpiall_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_v7_bpiall_switch_mm);
+#ifdef CONFIG_ARM_LPAE
+void cpu_v7_set_pte_ext(pte_t *ptep, pte_t pte);
+#else
+void cpu_v7_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+#endif
+__ADDRESSABLE(cpu_v7_set_pte_ext);
+#ifdef CONFIG_ARM_CPU_SUSPEND
+void cpu_v7_do_suspend(void *);
+__ADDRESSABLE(cpu_v7_do_suspend);
+void cpu_v7_do_resume(void *);
+__ADDRESSABLE(cpu_v7_do_resume);
+/* Special versions of suspend and resume for the CA9MP cores */
+void cpu_ca9mp_do_suspend(void *);
+__ADDRESSABLE(cpu_ca9mp_do_suspend);
+void cpu_ca9mp_do_resume(void *);
+__ADDRESSABLE(cpu_ca9mp_do_resume);
+/* Special versions of suspend and resume for the Marvell PJ4B cores */
+#ifdef CONFIG_CPU_PJ4B
+void cpu_pj4b_do_suspend(void *);
+__ADDRESSABLE(cpu_pj4b_do_suspend);
+void cpu_pj4b_do_resume(void *);
+__ADDRESSABLE(cpu_pj4b_do_resume);
+#endif /* CONFIG_CPU_PJ4B */
+#endif /* CONFIG_ARM_CPU_SUSPEND */
+#endif /* CONFIG_CPU_V7 */
+
+#ifdef CONFIG_CPU_V7M
+void cpu_v7m_proc_init(void);
+__ADDRESSABLE(cpu_v7m_proc_init);
+void cpu_v7m_proc_fin(void);
+__ADDRESSABLE(cpu_v7m_proc_fin);
+void cpu_v7m_reset(unsigned long addr, bool hvc);
+__ADDRESSABLE(cpu_v7m_reset);
+int cpu_v7m_do_idle(void);
+__ADDRESSABLE(cpu_v7m_do_idle);
+void cpu_v7m_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_v7m_dcache_clean_area);
+void cpu_v7m_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+__ADDRESSABLE(cpu_v7m_switch_mm);
+void cpu_v7m_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+__ADDRESSABLE(cpu_v7m_set_pte_ext);
+#ifdef CONFIG_ARM_CPU_SUSPEND
+void cpu_v7m_do_suspend(void *);
+__ADDRESSABLE(cpu_v7m_do_suspend);
+void cpu_v7m_do_resume(void *);
+__ADDRESSABLE(cpu_v7m_do_resume);
+#endif /* CONFIG_ARM_CPU_SUSPEND */
+void cpu_cm7_proc_fin(void);
+__ADDRESSABLE(cpu_cm7_proc_fin);
+void cpu_cm7_dcache_clean_area(void *addr, int size);
+__ADDRESSABLE(cpu_cm7_dcache_clean_area);
+#endif /* CONFIG_CPU_V7M */
diff --git a/arch/arm/mm/pv-fixup-asm.S b/arch/arm/mm/pv-fixup-asm.S
index f8e11f7c7880..1d9f52c71ad0 100644
--- a/arch/arm/mm/pv-fixup-asm.S
+++ b/arch/arm/mm/pv-fixup-asm.S
@@ -9,7 +9,7 @@
 #include <linux/pgtable.h>
 #include <asm/asm-offsets.h>
 #include <asm/cp15.h>
-#include <asm/memory.h>
+#include <asm/page.h>
 
 	.section ".idmap.text", "ax"
 
diff --git a/arch/arm/mm/tcm.h b/arch/arm/mm/tcm.h
deleted file mode 100644
index 6b80a760d875..000000000000
--- a/arch/arm/mm/tcm.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2008-2009 ST-Ericsson AB
- * TCM memory handling for ARM systems
- *
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- * Author: Rickard Andersson <rickard.andersson@stericsson.com>
- */
-
-#ifdef CONFIG_HAVE_TCM
-void __init tcm_init(void);
-#else
-/* No TCM support, just blank inlines to be optimized out */
-static inline void tcm_init(void)
-{
-}
-#endif
diff --git a/arch/arm/mm/tlb-fa.S b/arch/arm/mm/tlb-fa.S
index def6161ec452..85a6fe766b21 100644
--- a/arch/arm/mm/tlb-fa.S
+++ b/arch/arm/mm/tlb-fa.S
@@ -15,6 +15,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/tlbflush.h>
@@ -31,7 +32,7 @@
  *	- mm    - mm_struct describing address space
  */
 	.align	4
-ENTRY(fa_flush_user_tlb_range)
+SYM_TYPED_FUNC_START(fa_flush_user_tlb_range)
 	vma_vm_mm ip, r2
 	act_mm	r3				@ get current->active_mm
 	eors	r3, ip, r3			@ == mm ?
@@ -46,9 +47,10 @@ ENTRY(fa_flush_user_tlb_range)
 	blo	1b
 	mcr	p15, 0, r3, c7, c10, 4		@ data write barrier
 	ret	lr
+SYM_FUNC_END(fa_flush_user_tlb_range)
 
 
-ENTRY(fa_flush_kern_tlb_range)
+SYM_TYPED_FUNC_START(fa_flush_kern_tlb_range)
 	mov	r3, #0
 	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
 	bic	r0, r0, #0x0ff
@@ -60,8 +62,4 @@ ENTRY(fa_flush_kern_tlb_range)
 	mcr	p15, 0, r3, c7, c10, 4		@ data write barrier
 	mcr	p15, 0, r3, c7, c5, 4		@ prefetch flush (isb)
 	ret	lr
-
-	__INITDATA
-
-	/* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
-	define_tlb_functions fa, fa_tlb_flags
+SYM_FUNC_END(fa_flush_kern_tlb_range)
diff --git a/arch/arm/mm/tlb-v4.S b/arch/arm/mm/tlb-v4.S
index b962b4e75158..079774a02be6 100644
--- a/arch/arm/mm/tlb-v4.S
+++ b/arch/arm/mm/tlb-v4.S
@@ -11,6 +11,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/tlbflush.h>
@@ -27,7 +28,7 @@
  *	- mm    - mm_struct describing address space
  */
 	.align	5
-ENTRY(v4_flush_user_tlb_range)
+SYM_TYPED_FUNC_START(v4_flush_user_tlb_range)
 	vma_vm_mm ip, r2
 	act_mm	r3				@ get current->active_mm
 	eors	r3, ip, r3				@ == mm ?
@@ -40,6 +41,7 @@ ENTRY(v4_flush_user_tlb_range)
 	cmp	r0, r1
 	blo	1b
 	ret	lr
+SYM_FUNC_END(v4_flush_user_tlb_range)
 
 /*
  *	v4_flush_kern_tlb_range(start, end)
@@ -50,10 +52,11 @@ ENTRY(v4_flush_user_tlb_range)
  *	- start - virtual address (may not be aligned)
  *	- end   - virtual address (may not be aligned)
  */
+#ifdef CONFIG_CFI
+SYM_TYPED_FUNC_START(v4_flush_kern_tlb_range)
+	b	.v4_flush_kern_tlb_range
+SYM_FUNC_END(v4_flush_kern_tlb_range)
+#else
 .globl v4_flush_kern_tlb_range
 .equ v4_flush_kern_tlb_range, .v4_flush_kern_tlb_range
-
-	__INITDATA
-
-	/* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
-	define_tlb_functions v4, v4_tlb_flags
+#endif
diff --git a/arch/arm/mm/tlb-v4wb.S b/arch/arm/mm/tlb-v4wb.S
index 9348bba7586a..04e46c359e75 100644
--- a/arch/arm/mm/tlb-v4wb.S
+++ b/arch/arm/mm/tlb-v4wb.S
@@ -11,6 +11,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/tlbflush.h>
@@ -27,7 +28,7 @@
  *	- mm    - mm_struct describing address space
  */
 	.align	5
-ENTRY(v4wb_flush_user_tlb_range)
+SYM_TYPED_FUNC_START(v4wb_flush_user_tlb_range)
 	vma_vm_mm ip, r2
 	act_mm	r3				@ get current->active_mm
 	eors	r3, ip, r3				@ == mm ?
@@ -43,6 +44,7 @@ ENTRY(v4wb_flush_user_tlb_range)
 	cmp	r0, r1
 	blo	1b
 	ret	lr
+SYM_FUNC_END(v4wb_flush_user_tlb_range)
 
 /*
  *	v4_flush_kern_tlb_range(start, end)
@@ -53,7 +55,7 @@ ENTRY(v4wb_flush_user_tlb_range)
  *	- start - virtual address (may not be aligned)
  *	- end   - virtual address (may not be aligned)
  */
-ENTRY(v4wb_flush_kern_tlb_range)
+SYM_TYPED_FUNC_START(v4wb_flush_kern_tlb_range)
 	mov	r3, #0
 	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
 	bic	r0, r0, #0x0ff
@@ -64,8 +66,4 @@ ENTRY(v4wb_flush_kern_tlb_range)
 	cmp	r0, r1
 	blo	1b
 	ret	lr
-
-	__INITDATA
-
-	/* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
-	define_tlb_functions v4wb, v4wb_tlb_flags
+SYM_FUNC_END(v4wb_flush_kern_tlb_range)
diff --git a/arch/arm/mm/tlb-v4wbi.S b/arch/arm/mm/tlb-v4wbi.S
index d4f9040a4111..502dfe5628a3 100644
--- a/arch/arm/mm/tlb-v4wbi.S
+++ b/arch/arm/mm/tlb-v4wbi.S
@@ -11,6 +11,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/cfi_types.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/tlbflush.h>
@@ -26,7 +27,7 @@
  *	- mm    - mm_struct describing address space
  */
 	.align	5
-ENTRY(v4wbi_flush_user_tlb_range)
+SYM_TYPED_FUNC_START(v4wbi_flush_user_tlb_range)
 	vma_vm_mm ip, r2
 	act_mm	r3				@ get current->active_mm
 	eors	r3, ip, r3			@ == mm ?
@@ -43,8 +44,9 @@ ENTRY(v4wbi_flush_user_tlb_range)
 	cmp	r0, r1
 	blo	1b
 	ret	lr
+SYM_FUNC_END(v4wbi_flush_user_tlb_range)
 
-ENTRY(v4wbi_flush_kern_tlb_range)
+SYM_TYPED_FUNC_START(v4wbi_flush_kern_tlb_range)
 	mov	r3, #0
 	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
 	bic	r0, r0, #0x0ff
@@ -55,8 +57,4 @@ ENTRY(v4wbi_flush_kern_tlb_range)
 	cmp	r0, r1
 	blo	1b
 	ret	lr
-
-	__INITDATA
-
-	/* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
-	define_tlb_functions v4wbi, v4wbi_tlb_flags
+SYM_FUNC_END(v4wbi_flush_kern_tlb_range)
diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S
index 74f4b383afe3..8256a67ac654 100644
--- a/arch/arm/mm/tlb-v6.S
+++ b/arch/arm/mm/tlb-v6.S
@@ -9,6 +9,7 @@
  */
 #include <linux/init.h>
 #include <linux/linkage.h>
+#include <linux/cfi_types.h>
 #include <asm/asm-offsets.h>
 #include <asm/assembler.h>
 #include <asm/page.h>
@@ -17,6 +18,8 @@
 
 #define HARVARD_TLB
 
+.arch armv6
+
 /*
  *	v6wbi_flush_user_tlb_range(start, end, vma)
  *
@@ -30,7 +33,7 @@
  *	- the "Invalidate single entry" instruction will invalidate
  *	  both the I and the D TLBs on Harvard-style TLBs
  */
-ENTRY(v6wbi_flush_user_tlb_range)
+SYM_TYPED_FUNC_START(v6wbi_flush_user_tlb_range)
 	vma_vm_mm r3, r2			@ get vma->vm_mm
 	mov	ip, #0
 	mmid	r3, r3				@ get vm_mm->context.id
@@ -54,6 +57,7 @@ ENTRY(v6wbi_flush_user_tlb_range)
 	blo	1b
 	mcr	p15, 0, ip, c7, c10, 4		@ data synchronization barrier
 	ret	lr
+SYM_FUNC_END(v6wbi_flush_user_tlb_range)
 
 /*
  *	v6wbi_flush_kern_tlb_range(start,end)
@@ -63,7 +67,7 @@ ENTRY(v6wbi_flush_user_tlb_range)
  *	- start - start address (may not be aligned)
  *	- end   - end address (exclusive, may not be aligned)
  */
-ENTRY(v6wbi_flush_kern_tlb_range)
+SYM_TYPED_FUNC_START(v6wbi_flush_kern_tlb_range)
 	mov	r2, #0
 	mcr	p15, 0, r2, c7, c10, 4		@ drain write buffer
 	mov	r0, r0, lsr #PAGE_SHIFT		@ align address
@@ -83,8 +87,4 @@ ENTRY(v6wbi_flush_kern_tlb_range)
 	mcr	p15, 0, r2, c7, c10, 4		@ data synchronization barrier
 	mcr	p15, 0, r2, c7, c5, 4		@ prefetch flush (isb)
 	ret	lr
-
-	__INIT
-
-	/* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
-	define_tlb_functions v6wbi, v6wbi_tlb_flags
+SYM_FUNC_END(v6wbi_flush_kern_tlb_range)
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index 87bf4ab17721..f1aa0764a2cc 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -10,12 +10,15 @@
  */
 #include <linux/init.h>
 #include <linux/linkage.h>
+#include <linux/cfi_types.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/page.h>
 #include <asm/tlbflush.h>
 #include "proc-macros.S"
 
+.arch armv7-a
+
 /*
  *	v7wbi_flush_user_tlb_range(start, end, vma)
  *
@@ -29,7 +32,7 @@
  *	- the "Invalidate single entry" instruction will invalidate
  *	  both the I and the D TLBs on Harvard-style TLBs
  */
-ENTRY(v7wbi_flush_user_tlb_range)
+SYM_TYPED_FUNC_START(v7wbi_flush_user_tlb_range)
 	vma_vm_mm r3, r2			@ get vma->vm_mm
 	mmid	r3, r3				@ get vm_mm->context.id
 	dsb	ish
@@ -55,7 +58,7 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	blo	1b
 	dsb	ish
 	ret	lr
-ENDPROC(v7wbi_flush_user_tlb_range)
+SYM_FUNC_END(v7wbi_flush_user_tlb_range)
 
 /*
  *	v7wbi_flush_kern_tlb_range(start,end)
@@ -65,7 +68,7 @@ ENDPROC(v7wbi_flush_user_tlb_range)
  *	- start - start address (may not be aligned)
  *	- end   - end address (exclusive, may not be aligned)
  */
-ENTRY(v7wbi_flush_kern_tlb_range)
+SYM_TYPED_FUNC_START(v7wbi_flush_kern_tlb_range)
 	dsb	ish
 	mov	r0, r0, lsr #PAGE_SHIFT		@ align address
 	mov	r1, r1, lsr #PAGE_SHIFT
@@ -84,9 +87,4 @@ ENTRY(v7wbi_flush_kern_tlb_range)
 	dsb	ish
 	isb
 	ret	lr
-ENDPROC(v7wbi_flush_kern_tlb_range)
-
-	__INIT
-
-	/* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
-	define_tlb_functions v7wbi, v7wbi_tlb_flags_up, flags_smp=v7wbi_tlb_flags_smp
+SYM_FUNC_END(v7wbi_flush_kern_tlb_range)
diff --git a/arch/arm/mm/tlb.c b/arch/arm/mm/tlb.c
new file mode 100644
index 000000000000..42359793120b
--- /dev/null
+++ b/arch/arm/mm/tlb.c
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright 2024 Google LLC
+// Author: Ard Biesheuvel <ardb@google.com>
+
+#include <linux/types.h>
+#include <asm/tlbflush.h>
+
+#ifdef CONFIG_CPU_TLB_V4WT
+void v4_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
+void v4_flush_kern_tlb_range(unsigned long, unsigned long);
+
+struct cpu_tlb_fns v4_tlb_fns __initconst = {
+	.flush_user_range	= v4_flush_user_tlb_range,
+	.flush_kern_range	= v4_flush_kern_tlb_range,
+	.tlb_flags		= v4_tlb_flags,
+};
+#endif
+
+#ifdef CONFIG_CPU_TLB_V4WB
+void v4wb_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
+void v4wb_flush_kern_tlb_range(unsigned long, unsigned long);
+
+struct cpu_tlb_fns v4wb_tlb_fns __initconst = {
+	.flush_user_range	= v4wb_flush_user_tlb_range,
+	.flush_kern_range	= v4wb_flush_kern_tlb_range,
+	.tlb_flags		= v4wb_tlb_flags,
+};
+#endif
+
+#if defined(CONFIG_CPU_TLB_V4WBI) || defined(CONFIG_CPU_TLB_FEROCEON)
+void v4wbi_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
+void v4wbi_flush_kern_tlb_range(unsigned long, unsigned long);
+
+struct cpu_tlb_fns v4wbi_tlb_fns __initconst = {
+	.flush_user_range	= v4wbi_flush_user_tlb_range,
+	.flush_kern_range	= v4wbi_flush_kern_tlb_range,
+	.tlb_flags		= v4wbi_tlb_flags,
+};
+#endif
+
+#ifdef CONFIG_CPU_TLB_V6
+void v6wbi_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
+void v6wbi_flush_kern_tlb_range(unsigned long, unsigned long);
+
+struct cpu_tlb_fns v6wbi_tlb_fns __initconst = {
+	.flush_user_range	= v6wbi_flush_user_tlb_range,
+	.flush_kern_range	= v6wbi_flush_kern_tlb_range,
+	.tlb_flags		= v6wbi_tlb_flags,
+};
+#endif
+
+#ifdef CONFIG_CPU_TLB_V7
+void v7wbi_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
+void v7wbi_flush_kern_tlb_range(unsigned long, unsigned long);
+
+struct cpu_tlb_fns v7wbi_tlb_fns __initconst = {
+	.flush_user_range	= v7wbi_flush_user_tlb_range,
+	.flush_kern_range	= v7wbi_flush_kern_tlb_range,
+	.tlb_flags		= IS_ENABLED(CONFIG_SMP) ? v7wbi_tlb_flags_smp
+							 : v7wbi_tlb_flags_up,
+};
+
+#ifdef CONFIG_SMP_ON_UP
+/* This will be run-time patched so the offset better be right */
+static_assert(offsetof(struct cpu_tlb_fns, tlb_flags) == 8);
+
+asm("	.pushsection	\".alt.smp.init\", \"a\"		\n" \
+    "	.align		2					\n" \
+    "	.long		v7wbi_tlb_fns + 8 - .			\n" \
+    "	.long "  	__stringify(v7wbi_tlb_flags_up) "	\n" \
+    "	.popsection						\n");
+#endif
+#endif
+
+#ifdef CONFIG_CPU_TLB_FA
+void fa_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
+void fa_flush_kern_tlb_range(unsigned long, unsigned long);
+
+struct cpu_tlb_fns fa_tlb_fns __initconst = {
+	.flush_user_range	= fa_flush_user_tlb_range,
+	.flush_kern_range	= fa_flush_kern_tlb_range,
+	.tlb_flags		= fa_tlb_flags,
+};
+#endif
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index 6a1c9fca5260..deeb8f292454 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -2,6 +2,7 @@
 /*
  * Just-In-Time compiler for eBPF filters on 32bit ARM
  *
+ * Copyright (c) 2023 Puranjay Mohan <puranjay12@gmail.com>
  * Copyright (c) 2017 Shubham Bansal <illusionist.neo@gmail.com>
  * Copyright (c) 2011 Mircea Gherzan <mgherzan@gmail.com>
  */
@@ -15,6 +16,7 @@
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/if_vlan.h>
+#include <linux/math64.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hwcap.h>
@@ -228,6 +230,44 @@ static u32 jit_mod32(u32 dividend, u32 divisor)
 	return dividend % divisor;
 }
 
+static s32 jit_sdiv32(s32 dividend, s32 divisor)
+{
+	return dividend / divisor;
+}
+
+static s32 jit_smod32(s32 dividend, s32 divisor)
+{
+	return dividend % divisor;
+}
+
+/* Wrappers for 64-bit div/mod */
+static u64 jit_udiv64(u64 dividend, u64 divisor)
+{
+	return div64_u64(dividend, divisor);
+}
+
+static u64 jit_mod64(u64 dividend, u64 divisor)
+{
+	u64 rem;
+
+	div64_u64_rem(dividend, divisor, &rem);
+	return rem;
+}
+
+static s64 jit_sdiv64(s64 dividend, s64 divisor)
+{
+	return div64_s64(dividend, divisor);
+}
+
+static s64 jit_smod64(s64 dividend, s64 divisor)
+{
+	u64 q;
+
+	q = div64_s64(dividend, divisor);
+
+	return dividend - q * divisor;
+}
+
 static inline void _emit(int cond, u32 inst, struct jit_ctx *ctx)
 {
 	inst |= (cond << 28);
@@ -333,6 +373,9 @@ static u32 arm_bpf_ldst_imm8(u32 op, u8 rt, u8 rn, s16 imm8)
 #define ARM_LDRD_I(rt, rn, off)	arm_bpf_ldst_imm8(ARM_INST_LDRD_I, rt, rn, off)
 #define ARM_LDRH_I(rt, rn, off)	arm_bpf_ldst_imm8(ARM_INST_LDRH_I, rt, rn, off)
 
+#define ARM_LDRSH_I(rt, rn, off) arm_bpf_ldst_imm8(ARM_INST_LDRSH_I, rt, rn, off)
+#define ARM_LDRSB_I(rt, rn, off) arm_bpf_ldst_imm8(ARM_INST_LDRSB_I, rt, rn, off)
+
 #define ARM_STR_I(rt, rn, off)	arm_bpf_ldst_imm12(ARM_INST_STR_I, rt, rn, off)
 #define ARM_STRB_I(rt, rn, off)	arm_bpf_ldst_imm12(ARM_INST_STRB_I, rt, rn, off)
 #define ARM_STRD_I(rt, rn, off)	arm_bpf_ldst_imm8(ARM_INST_STRD_I, rt, rn, off)
@@ -474,17 +517,18 @@ static inline int epilogue_offset(const struct jit_ctx *ctx)
 	return to - from - 2;
 }
 
-static inline void emit_udivmod(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx, u8 op)
+static inline void emit_udivmod(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx, u8 op, u8 sign)
 {
 	const int exclude_mask = BIT(ARM_R0) | BIT(ARM_R1);
 	const s8 *tmp = bpf2a32[TMP_REG_1];
+	u32 dst;
 
 #if __LINUX_ARM_ARCH__ == 7
 	if (elf_hwcap & HWCAP_IDIVA) {
-		if (op == BPF_DIV)
-			emit(ARM_UDIV(rd, rm, rn), ctx);
-		else {
-			emit(ARM_UDIV(ARM_IP, rm, rn), ctx);
+		if (op == BPF_DIV) {
+			emit(sign ? ARM_SDIV(rd, rm, rn) : ARM_UDIV(rd, rm, rn), ctx);
+		} else {
+			emit(sign ? ARM_SDIV(ARM_IP, rm, rn) : ARM_UDIV(ARM_IP, rm, rn), ctx);
 			emit(ARM_MLS(rd, rn, ARM_IP, rm), ctx);
 		}
 		return;
@@ -512,8 +556,19 @@ static inline void emit_udivmod(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx, u8 op)
 	emit(ARM_PUSH(CALLER_MASK & ~exclude_mask), ctx);
 
 	/* Call appropriate function */
-	emit_mov_i(ARM_IP, op == BPF_DIV ?
-		   (u32)jit_udiv32 : (u32)jit_mod32, ctx);
+	if (sign) {
+		if (op == BPF_DIV)
+			dst = (u32)jit_sdiv32;
+		else
+			dst = (u32)jit_smod32;
+	} else {
+		if (op == BPF_DIV)
+			dst = (u32)jit_udiv32;
+		else
+			dst = (u32)jit_mod32;
+	}
+
+	emit_mov_i(ARM_IP, dst, ctx);
 	emit_blx_r(ARM_IP, ctx);
 
 	/* Restore caller-saved registers from stack */
@@ -530,6 +585,78 @@ static inline void emit_udivmod(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx, u8 op)
 		emit(ARM_MOV_R(ARM_R0, tmp[1]), ctx);
 }
 
+static inline void emit_udivmod64(const s8 *rd, const s8 *rm, const s8 *rn, struct jit_ctx *ctx,
+				  u8 op, u8 sign)
+{
+	u32 dst;
+
+	/* Push caller-saved registers on stack */
+	emit(ARM_PUSH(CALLER_MASK), ctx);
+
+	/*
+	 * As we are implementing 64-bit div/mod as function calls, We need to put the dividend in
+	 * R0-R1 and the divisor in R2-R3. As we have already pushed these registers on the stack,
+	 * we can recover them later after returning from the function call.
+	 */
+	if (rm[1] != ARM_R0 || rn[1] != ARM_R2) {
+		/*
+		 * Move Rm to {R1, R0} if it is not already there.
+		 */
+		if (rm[1] != ARM_R0) {
+			if (rn[1] == ARM_R0)
+				emit(ARM_PUSH(BIT(ARM_R0) | BIT(ARM_R1)), ctx);
+			emit(ARM_MOV_R(ARM_R1, rm[0]), ctx);
+			emit(ARM_MOV_R(ARM_R0, rm[1]), ctx);
+			if (rn[1] == ARM_R0) {
+				emit(ARM_POP(BIT(ARM_R2) | BIT(ARM_R3)), ctx);
+				goto cont;
+			}
+		}
+		/*
+		 * Move Rn to {R3, R2} if it is not already there.
+		 */
+		if (rn[1] != ARM_R2) {
+			emit(ARM_MOV_R(ARM_R3, rn[0]), ctx);
+			emit(ARM_MOV_R(ARM_R2, rn[1]), ctx);
+		}
+	}
+
+cont:
+
+	/* Call appropriate function */
+	if (sign) {
+		if (op == BPF_DIV)
+			dst = (u32)jit_sdiv64;
+		else
+			dst = (u32)jit_smod64;
+	} else {
+		if (op == BPF_DIV)
+			dst = (u32)jit_udiv64;
+		else
+			dst = (u32)jit_mod64;
+	}
+
+	emit_mov_i(ARM_IP, dst, ctx);
+	emit_blx_r(ARM_IP, ctx);
+
+	/* Save return value */
+	if (rd[1] != ARM_R0) {
+		emit(ARM_MOV_R(rd[0], ARM_R1), ctx);
+		emit(ARM_MOV_R(rd[1], ARM_R0), ctx);
+	}
+
+	/* Recover {R3, R2} and {R1, R0} from stack if they are not Rd */
+	if (rd[1] != ARM_R0 && rd[1] != ARM_R2) {
+		emit(ARM_POP(CALLER_MASK), ctx);
+	} else if (rd[1] != ARM_R0) {
+		emit(ARM_POP(BIT(ARM_R0) | BIT(ARM_R1)), ctx);
+		emit(ARM_ADD_I(ARM_SP, ARM_SP, 8), ctx);
+	} else {
+		emit(ARM_ADD_I(ARM_SP, ARM_SP, 8), ctx);
+		emit(ARM_POP(BIT(ARM_R2) | BIT(ARM_R3)), ctx);
+	}
+}
+
 /* Is the translated BPF register on stack? */
 static bool is_stacked(s8 reg)
 {
@@ -744,8 +871,7 @@ static inline void emit_a32_alu_r64(const bool is64, const s8 dst[],
 }
 
 /* dst = src (4 bytes)*/
-static inline void emit_a32_mov_r(const s8 dst, const s8 src,
-				  struct jit_ctx *ctx) {
+static inline void emit_a32_mov_r(const s8 dst, const s8 src, struct jit_ctx *ctx) {
 	const s8 *tmp = bpf2a32[TMP_REG_1];
 	s8 rt;
 
@@ -782,6 +908,59 @@ static inline void emit_a32_mov_r64(const bool is64, const s8 dst[],
 	}
 }
 
+/* dst = (signed)src */
+static inline void emit_a32_movsx_r64(const bool is64, const u8 off, const s8 dst[], const s8 src[],
+				      struct jit_ctx *ctx) {
+	const s8 *tmp = bpf2a32[TMP_REG_1];
+	s8 rs;
+	s8 rd;
+
+	if (is_stacked(dst_lo))
+		rd = tmp[1];
+	else
+		rd = dst_lo;
+	rs = arm_bpf_get_reg32(src_lo, rd, ctx);
+	/* rs may be one of src[1], dst[1], or tmp[1] */
+
+	/* Sign extend rs if needed. If off == 32, lower 32-bits of src are moved to dst and sign
+	 * extension only happens in the upper 64 bits.
+	 */
+	if (off != 32) {
+		/* Sign extend rs into rd */
+		emit(ARM_LSL_I(rd, rs, 32 - off), ctx);
+		emit(ARM_ASR_I(rd, rd, 32 - off), ctx);
+	} else {
+		rd = rs;
+	}
+
+	/* Write rd to dst_lo
+	 *
+	 * Optimization:
+	 * Assume:
+	 * 1. dst == src and stacked.
+	 * 2. off == 32
+	 *
+	 * In this case src_lo was loaded into rd(tmp[1]) but rd was not sign extended as off==32.
+	 * So, we don't need to write rd back to dst_lo as they have the same value.
+	 * This saves us one str instruction.
+	 */
+	if (dst_lo != src_lo || off != 32)
+		arm_bpf_put_reg32(dst_lo, rd, ctx);
+
+	if (!is64) {
+		if (!ctx->prog->aux->verifier_zext)
+			/* Zero out high 4 bytes */
+			emit_a32_mov_i(dst_hi, 0, ctx);
+	} else {
+		if (is_stacked(dst_hi)) {
+			emit(ARM_ASR_I(tmp[0], rd, 31), ctx);
+			arm_bpf_put_reg32(dst_hi, tmp[0], ctx);
+		} else {
+			emit(ARM_ASR_I(dst_hi, rd, 31), ctx);
+		}
+	}
+}
+
 /* Shift operations */
 static inline void emit_a32_alu_i(const s8 dst, const u32 val,
 				struct jit_ctx *ctx, const u8 op) {
@@ -1026,6 +1205,24 @@ static bool is_ldst_imm(s16 off, const u8 size)
 	return -off_max <= off && off <= off_max;
 }
 
+static bool is_ldst_imm8(s16 off, const u8 size)
+{
+	s16 off_max = 0;
+
+	switch (size) {
+	case BPF_B:
+		off_max = 0xff;
+		break;
+	case BPF_W:
+		off_max = 0xfff;
+		break;
+	case BPF_H:
+		off_max = 0xff;
+		break;
+	}
+	return -off_max <= off && off <= off_max;
+}
+
 /* *(size *)(dst + off) = src */
 static inline void emit_str_r(const s8 dst, const s8 src[],
 			      s16 off, struct jit_ctx *ctx, const u8 sz){
@@ -1105,6 +1302,50 @@ static inline void emit_ldx_r(const s8 dst[], const s8 src,
 	arm_bpf_put_reg64(dst, rd, ctx);
 }
 
+/* dst = *(signed size*)(src + off) */
+static inline void emit_ldsx_r(const s8 dst[], const s8 src,
+			       s16 off, struct jit_ctx *ctx, const u8 sz){
+	const s8 *tmp = bpf2a32[TMP_REG_1];
+	const s8 *rd = is_stacked(dst_lo) ? tmp : dst;
+	s8 rm = src;
+	int add_off;
+
+	if (!is_ldst_imm8(off, sz)) {
+		/*
+		 * offset does not fit in the load/store immediate,
+		 * construct an ADD instruction to apply the offset.
+		 */
+		add_off = imm8m(off);
+		if (add_off > 0) {
+			emit(ARM_ADD_I(tmp[0], src, add_off), ctx);
+			rm = tmp[0];
+		} else {
+			emit_a32_mov_i(tmp[0], off, ctx);
+			emit(ARM_ADD_R(tmp[0], tmp[0], src), ctx);
+			rm = tmp[0];
+		}
+		off = 0;
+	}
+
+	switch (sz) {
+	case BPF_B:
+		/* Load a Byte with sign extension*/
+		emit(ARM_LDRSB_I(rd[1], rm, off), ctx);
+		break;
+	case BPF_H:
+		/* Load a HalfWord with sign extension*/
+		emit(ARM_LDRSH_I(rd[1], rm, off), ctx);
+		break;
+	case BPF_W:
+		/* Load a Word*/
+		emit(ARM_LDR_I(rd[1], rm, off), ctx);
+		break;
+	}
+	/* Carry the sign extension to upper 32 bits */
+	emit(ARM_ASR_I(rd[0], rd[1], 31), ctx);
+	arm_bpf_put_reg64(dst, rd, ctx);
+}
+
 /* Arithmatic Operation */
 static inline void emit_ar_r(const u8 rd, const u8 rt, const u8 rm,
 			     const u8 rn, struct jit_ctx *ctx, u8 op,
@@ -1385,7 +1626,10 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 				emit_a32_mov_i(dst_hi, 0, ctx);
 				break;
 			}
-			emit_a32_mov_r64(is64, dst, src, ctx);
+			if (insn->off)
+				emit_a32_movsx_r64(is64, insn->off, dst, src, ctx);
+			else
+				emit_a32_mov_r64(is64, dst, src, ctx);
 			break;
 		case BPF_K:
 			/* Sign-extend immediate value to destination reg */
@@ -1461,7 +1705,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 			rt = src_lo;
 			break;
 		}
-		emit_udivmod(rd_lo, rd_lo, rt, ctx, BPF_OP(code));
+		emit_udivmod(rd_lo, rd_lo, rt, ctx, BPF_OP(code), off);
 		arm_bpf_put_reg32(dst_lo, rd_lo, ctx);
 		if (!ctx->prog->aux->verifier_zext)
 			emit_a32_mov_i(dst_hi, 0, ctx);
@@ -1470,7 +1714,19 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 	case BPF_ALU64 | BPF_DIV | BPF_X:
 	case BPF_ALU64 | BPF_MOD | BPF_K:
 	case BPF_ALU64 | BPF_MOD | BPF_X:
-		goto notyet;
+		rd = arm_bpf_get_reg64(dst, tmp2, ctx);
+		switch (BPF_SRC(code)) {
+		case BPF_X:
+			rs = arm_bpf_get_reg64(src, tmp, ctx);
+			break;
+		case BPF_K:
+			rs = tmp;
+			emit_a32_mov_se_i64(is64, rs, imm, ctx);
+			break;
+		}
+		emit_udivmod64(rd, rd, rs, ctx, BPF_OP(code), off);
+		arm_bpf_put_reg64(dst, rd, ctx);
+		break;
 	/* dst = dst << imm */
 	/* dst = dst >> imm */
 	/* dst = dst >> imm (signed) */
@@ -1545,10 +1801,12 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 		break;
 	/* dst = htole(dst) */
 	/* dst = htobe(dst) */
-	case BPF_ALU | BPF_END | BPF_FROM_LE:
-	case BPF_ALU | BPF_END | BPF_FROM_BE:
+	case BPF_ALU | BPF_END | BPF_FROM_LE: /* also BPF_TO_LE */
+	case BPF_ALU | BPF_END | BPF_FROM_BE: /* also BPF_TO_BE */
+	/* dst = bswap(dst) */
+	case BPF_ALU64 | BPF_END | BPF_FROM_LE: /* also BPF_TO_LE */
 		rd = arm_bpf_get_reg64(dst, tmp, ctx);
-		if (BPF_SRC(code) == BPF_FROM_LE)
+		if (BPF_SRC(code) == BPF_FROM_LE && BPF_CLASS(code) != BPF_ALU64)
 			goto emit_bswap_uxt;
 		switch (imm) {
 		case 16:
@@ -1603,8 +1861,15 @@ exit:
 	case BPF_LDX | BPF_MEM | BPF_H:
 	case BPF_LDX | BPF_MEM | BPF_B:
 	case BPF_LDX | BPF_MEM | BPF_DW:
+	/* LDSX: dst = *(signed size *)(src + off) */
+	case BPF_LDX | BPF_MEMSX | BPF_B:
+	case BPF_LDX | BPF_MEMSX | BPF_H:
+	case BPF_LDX | BPF_MEMSX | BPF_W:
 		rn = arm_bpf_get_reg32(src_lo, tmp2[1], ctx);
-		emit_ldx_r(dst, rn, off, ctx, BPF_SIZE(code));
+		if (BPF_MODE(insn->code) == BPF_MEMSX)
+			emit_ldsx_r(dst, rn, off, ctx, BPF_SIZE(code));
+		else
+			emit_ldx_r(dst, rn, off, ctx, BPF_SIZE(code));
 		break;
 	/* speculation barrier */
 	case BPF_ST | BPF_NOSPEC:
@@ -1761,10 +2026,15 @@ go_jmp:
 		break;
 	/* JMP OFF */
 	case BPF_JMP | BPF_JA:
+	case BPF_JMP32 | BPF_JA:
 	{
-		if (off == 0)
+		if (BPF_CLASS(code) == BPF_JMP32 && imm != 0)
+			jmp_offset = bpf2a32_offset(i + imm, i, ctx);
+		else if (BPF_CLASS(code) == BPF_JMP && off != 0)
+			jmp_offset = bpf2a32_offset(i + off, i, ctx);
+		else
 			break;
-		jmp_offset = bpf2a32_offset(i+off, i, ctx);
+
 		check_imm24(jmp_offset);
 		emit(ARM_B(jmp_offset), ctx);
 		break;
@@ -1982,28 +2252,21 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	/* If building the body of the JITed code fails somehow,
 	 * we fall back to the interpretation.
 	 */
-	if (build_body(&ctx) < 0) {
-		image_ptr = NULL;
-		bpf_jit_binary_free(header);
-		prog = orig_prog;
-		goto out_imms;
-	}
+	if (build_body(&ctx) < 0)
+		goto out_free;
 	build_epilogue(&ctx);
 
 	/* 3.) Extra pass to validate JITed Code */
-	if (validate_code(&ctx)) {
-		image_ptr = NULL;
-		bpf_jit_binary_free(header);
-		prog = orig_prog;
-		goto out_imms;
-	}
+	if (validate_code(&ctx))
+		goto out_free;
 	flush_icache_range((u32)header, (u32)(ctx.target + ctx.idx));
 
 	if (bpf_jit_enable > 1)
 		/* there are 2 passes here */
 		bpf_jit_dump(prog->len, image_size, 2, ctx.target);
 
-	bpf_jit_binary_lock_ro(header);
+	if (bpf_jit_binary_lock_ro(header))
+		goto out_free;
 	prog->bpf_func = (void *)ctx.target;
 	prog->jited = 1;
 	prog->jited_len = image_size;
@@ -2020,5 +2283,11 @@ out:
 		bpf_jit_prog_release_other(prog, prog == orig_prog ?
 					   tmp : orig_prog);
 	return prog;
+
+out_free:
+	image_ptr = NULL;
+	bpf_jit_binary_free(header);
+	prog = orig_prog;
+	goto out_imms;
 }
 
diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h
index e0b593a1498d..438f0e1f91a0 100644
--- a/arch/arm/net/bpf_jit_32.h
+++ b/arch/arm/net/bpf_jit_32.h
@@ -79,9 +79,11 @@
 #define ARM_INST_LDST__IMM12	0x00000fff
 #define ARM_INST_LDRB_I		0x05500000
 #define ARM_INST_LDRB_R		0x07d00000
+#define ARM_INST_LDRSB_I	0x015000d0
 #define ARM_INST_LDRD_I		0x014000d0
 #define ARM_INST_LDRH_I		0x015000b0
 #define ARM_INST_LDRH_R		0x019000b0
+#define ARM_INST_LDRSH_I	0x015000f0
 #define ARM_INST_LDR_I		0x05100000
 #define ARM_INST_LDR_R		0x07900000
 
@@ -137,6 +139,7 @@
 #define ARM_INST_TST_I		0x03100000
 
 #define ARM_INST_UDIV		0x0730f010
+#define ARM_INST_SDIV		0x0710f010
 
 #define ARM_INST_UMULL		0x00800090
 
@@ -265,6 +268,7 @@
 #define ARM_TST_I(rn, imm)	_AL3_I(ARM_INST_TST, 0, rn, imm)
 
 #define ARM_UDIV(rd, rn, rm)	(ARM_INST_UDIV | (rd) << 16 | (rn) | (rm) << 8)
+#define ARM_SDIV(rd, rn, rm)	(ARM_INST_SDIV | (rd) << 16 | (rn) | (rm) << 8)
 
 #define ARM_UMULL(rd_lo, rd_hi, rn, rm)	(ARM_INST_UMULL | (rd_hi) << 16 \
 					 | (rd_lo) << 12 | (rm) << 8 | rn)
diff --git a/arch/arm/nwfpe/Makefile b/arch/arm/nwfpe/Makefile
index 303400fa2cdf..2aec85ab1e8b 100644
--- a/arch/arm/nwfpe/Makefile
+++ b/arch/arm/nwfpe/Makefile
@@ -11,3 +11,9 @@ nwfpe-y				+= fpa11.o fpa11_cpdo.o fpa11_cpdt.o \
 				   entry.o
 
 nwfpe-$(CONFIG_FPE_NWFPE_XP)	+= extended_cpdo.o
+
+# Try really hard to avoid generating calls to __aeabi_uldivmod() from
+# float64_rem() due to loop elision.
+ifdef CONFIG_CC_IS_CLANG
+CFLAGS_softfloat.o	+= -mllvm -replexitval=never
+endif
diff --git a/arch/arm/nwfpe/entry.S b/arch/arm/nwfpe/entry.S
index d8f9915566e1..354d297a193b 100644
--- a/arch/arm/nwfpe/entry.S
+++ b/arch/arm/nwfpe/entry.S
@@ -7,6 +7,7 @@
     Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
 
 */
+#include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/opcodes.h>
 
@@ -104,6 +105,7 @@ next:
 	@ plain LDR instruction.  Weird, but it seems harmless.
 	.pushsection .text.fixup,"ax"
 	.align	2
+.Lrep:	str     r4, [sp, #S_PC]		@ retry current instruction
 .Lfix:	ret	r9			@ let the user eat segfaults
 	.popsection
 
@@ -111,3 +113,78 @@ next:
 	.align	3
 	.long	.Lx1, .Lfix
 	.popsection
+
+	@
+	@ Check whether the instruction is a co-processor instruction.
+	@ If yes, we need to call the relevant co-processor handler.
+	@ Only FPE instructions are dispatched here, everything else
+	@ is handled by undef hooks.
+	@
+	@ Emulators may wish to make use of the following registers:
+	@  r4  = PC value to resume execution after successful emulation
+	@  r9  = normal "successful" return address
+	@  lr  = unrecognised instruction return address
+	@ IRQs enabled, FIQs enabled.
+	@
+ENTRY(call_fpe)
+	mov	r2, r4
+	sub	r4, r4, #4			@ ARM instruction at user PC - 4
+USERL(	.Lrep,	ldrt r0, [r4])			@ load opcode from user space
+ARM_BE8(rev	r0, r0)				@ little endian instruction
+
+	uaccess_disable ip
+
+	get_thread_info r10			@ get current thread
+	tst	r0, #0x08000000			@ only CDP/CPRT/LDC/STC have bit 27
+	reteq	lr
+	and	r8, r0, #0x00000f00		@ mask out CP number
+#ifdef CONFIG_IWMMXT
+	@ Test if we need to give access to iWMMXt coprocessors
+	ldr	r5, [r10, #TI_FLAGS]
+	rsbs	r7, r8, #(1 << 8)		@ CP 0 or 1 only
+	movscs	r7, r5, lsr #(TIF_USING_IWMMXT + 1)
+	movcs	r0, sp				@ pass struct pt_regs
+	bcs	iwmmxt_task_enable
+#endif
+	add	pc, pc, r8, lsr #6
+	nop
+
+	ret	lr				@ CP#0
+	b	do_fpe				@ CP#1 (FPE)
+	b	do_fpe				@ CP#2 (FPE)
+	ret	lr				@ CP#3
+	ret	lr				@ CP#4
+	ret	lr				@ CP#5
+	ret	lr				@ CP#6
+	ret	lr				@ CP#7
+	ret	lr				@ CP#8
+	ret	lr				@ CP#9
+	ret	lr				@ CP#10 (VFP)
+	ret	lr				@ CP#11 (VFP)
+	ret	lr				@ CP#12
+	ret	lr				@ CP#13
+	ret	lr				@ CP#14 (Debug)
+	ret	lr				@ CP#15 (Control)
+
+do_fpe:
+	add	r10, r10, #TI_FPSTATE		@ r10 = workspace
+	ldr_va	pc, fp_enter, tmp=r4		@ Call FP module USR entry point
+
+	@
+	@ The FP module is called with these registers set:
+	@  r0  = instruction
+	@  r2  = PC+4
+	@  r9  = normal "successful" return address
+	@  r10 = FP workspace
+	@  lr  = unrecognised FP instruction return address
+	@
+
+	.pushsection .data
+	.align	2
+ENTRY(fp_enter)
+	.word	no_fp
+	.popsection
+
+no_fp:
+	ret	lr
+ENDPROC(no_fp)
diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile
index 4e3f25de13c1..e8c7580df8ca 100644
--- a/arch/arm/plat-orion/Makefile
+++ b/arch/arm/plat-orion/Makefile
@@ -2,7 +2,7 @@
 #
 # Makefile for the linux kernel.
 #
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+ccflags-y := -I$(src)/include
 
 orion-gpio-$(CONFIG_GPIOLIB)      += gpio.o
 obj-$(CONFIG_PLAT_ORION_LEGACY)   += irq.o pcie.o time.o common.o mpp.o
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 8647cb80a93b..cabe98386245 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -18,7 +18,6 @@
 #include <linux/clkdev.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/mv643xx_i2c.h>
-#include <linux/platform_data/dsa.h>
 #include <linux/platform_data/dma-mv_xor.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/common.h>
@@ -468,36 +467,6 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 		    eth_data, &orion_ge11);
 }
 
-#ifdef CONFIG_ARCH_ORION5X
-/*****************************************************************************
- * Ethernet switch
- ****************************************************************************/
-static __initdata struct mdio_board_info orion_ge00_switch_board_info = {
-	.bus_id   = "orion-mii",
-	.modalias = "mv88e6085",
-};
-
-void __init orion_ge00_switch_init(struct dsa_chip_data *d)
-{
-	unsigned int i;
-
-	if (!IS_BUILTIN(CONFIG_PHYLIB))
-		return;
-
-	for (i = 0; i < ARRAY_SIZE(d->port_names); i++) {
-		if (!strcmp(d->port_names[i], "cpu")) {
-			d->netdev[i] = &orion_ge00.dev;
-			break;
-		}
-	}
-
-	orion_ge00_switch_board_info.mdio_addr = d->sw_addr;
-	orion_ge00_switch_board_info.platform_data = d;
-
-	mdiobus_register_board_info(&orion_ge00_switch_board_info, 1);
-}
-#endif
-
 /*****************************************************************************
  * I2C
  ****************************************************************************/
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 3ef9ecdd6343..49e29b7894a3 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -18,7 +18,8 @@
 #include <linux/spinlock.h>
 #include <linux/bitops.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/consumer.h>
 #include <linux/leds.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
@@ -210,7 +211,7 @@ orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, int value)
 	return 0;
 }
 
-static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value)
+static int orion_gpio_set(struct gpio_chip *chip, unsigned int pin, int value)
 {
 	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 	unsigned long flags;
@@ -218,6 +219,8 @@ static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value)
 	spin_lock_irqsave(&ochip->lock, flags);
 	__set_level(ochip, pin, value);
 	spin_unlock_irqrestore(&ochip->lock, flags);
+
+	return 0;
 }
 
 static int orion_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
@@ -312,7 +315,7 @@ int orion_gpio_led_blink_set(struct gpio_desc *desc, int state,
 	case GPIO_LED_NO_BLINK_LOW:
 	case GPIO_LED_NO_BLINK_HIGH:
 		orion_gpio_set_blink(gpio, 0);
-		gpio_set_value(gpio, state);
+		gpiod_set_raw_value(desc, state);
 		break;
 	case GPIO_LED_BLINK:
 		orion_gpio_set_blink(gpio, 1);
@@ -465,14 +468,14 @@ static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 
 		if (is_out) {
 			seq_printf(s, " out %s %s\n",
-				   out & msk ? "hi" : "lo",
+				   str_hi_lo(out & msk),
 				   blink & msk ? "(blink )" : "");
 			continue;
 		}
 
 		seq_printf(s, " in  %s (act %s) - IRQ",
-			   (data_in ^ in_pol) & msk  ? "hi" : "lo",
-			   in_pol & msk ? "lo" : "hi");
+			   str_hi_lo((data_in ^ in_pol) & msk),
+			   str_lo_hi(in_pol & msk));
 		if (!((edg_msk | lvl_msk) & msk)) {
 			seq_puts(s, " disabled\n");
 			continue;
@@ -495,11 +498,10 @@ static void orion_gpio_unmask_irq(struct irq_data *d)
 	u32 reg_val;
 	u32 mask = d->mask;
 
-	irq_gc_lock(gc);
+	guard(raw_spinlock)(&gc->lock);
 	reg_val = irq_reg_readl(gc, ct->regs.mask);
 	reg_val |= mask;
 	irq_reg_writel(gc, reg_val, ct->regs.mask);
-	irq_gc_unlock(gc);
 }
 
 static void orion_gpio_mask_irq(struct irq_data *d)
@@ -509,11 +511,10 @@ static void orion_gpio_mask_irq(struct irq_data *d)
 	u32 mask = d->mask;
 	u32 reg_val;
 
-	irq_gc_lock(gc);
+	guard(raw_spinlock)(&gc->lock);
 	reg_val = irq_reg_readl(gc, ct->regs.mask);
 	reg_val &= ~mask;
 	irq_reg_writel(gc, reg_val, ct->regs.mask);
-	irq_gc_unlock(gc);
 }
 
 void __init orion_gpio_init(int gpio_base, int ngpio,
@@ -601,12 +602,12 @@ void __init orion_gpio_init(int gpio_base, int ngpio,
 			       IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
 
 	/* Setup irq domain on top of the generic chip. */
-	ochip->domain = irq_domain_add_legacy(NULL,
-					      ochip->chip.ngpio,
-					      ochip->secondary_irq_base,
-					      ochip->secondary_irq_base,
-					      &irq_domain_simple_ops,
-					      ochip);
+	ochip->domain = irq_domain_create_legacy(NULL,
+						 ochip->chip.ngpio,
+						 ochip->secondary_irq_base,
+						 ochip->secondary_irq_base,
+						 &irq_domain_simple_ops,
+						 ochip);
 	if (!ochip->domain)
 		panic("%s: couldn't allocate irq domain (DT).\n",
 		      ochip->chip.label);
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index 3647d3b33c20..d2aad95d20cb 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -12,7 +12,6 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 
-struct dsa_chip_data;
 struct mv_sata_platform_data;
 
 void __init orion_uart0_init(void __iomem *membase,
@@ -57,8 +56,6 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq);
 
-void __init orion_ge00_switch_init(struct dsa_chip_data *d);
-
 void __init orion_i2c_init(unsigned long mapbase,
 			   unsigned long irq,
 			   unsigned long freq_m);
diff --git a/arch/arm/probes/kprobes/checkers-common.c b/arch/arm/probes/kprobes/checkers-common.c
index 4d720990cf2a..eba7ac4725c0 100644
--- a/arch/arm/probes/kprobes/checkers-common.c
+++ b/arch/arm/probes/kprobes/checkers-common.c
@@ -40,7 +40,7 @@ enum probes_insn checker_stack_use_imm_0xx(probes_opcode_t insn,
  * Different from other insn uses imm8, the real addressing offset of
  * STRD in T32 encoding should be imm8 * 4. See ARMARM description.
  */
-enum probes_insn checker_stack_use_t32strd(probes_opcode_t insn,
+static enum probes_insn checker_stack_use_t32strd(probes_opcode_t insn,
 		struct arch_probes_insn *asi,
 		const struct decode_header *h)
 {
diff --git a/arch/arm/probes/kprobes/core.c b/arch/arm/probes/kprobes/core.c
index 9090c3a74dcc..9fd877c87a38 100644
--- a/arch/arm/probes/kprobes/core.c
+++ b/arch/arm/probes/kprobes/core.c
@@ -25,7 +25,7 @@
 #include <asm/cacheflush.h>
 #include <linux/percpu.h>
 #include <linux/bug.h>
-#include <asm/patch.h>
+#include <asm/text-patching.h>
 #include <asm/sections.h>
 
 #include "../decode-arm.h"
@@ -233,7 +233,7 @@ singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb)
  * kprobe, and that level is reserved for user kprobe handlers, so we can't
  * risk encountering a new kprobe in an interrupt handler.
  */
-void __kprobes kprobe_handler(struct pt_regs *regs)
+static void __kprobes kprobe_handler(struct pt_regs *regs)
 {
 	struct kprobe *p, *cur;
 	struct kprobe_ctlblk *kcb;
diff --git a/arch/arm/probes/kprobes/opt-arm.c b/arch/arm/probes/kprobes/opt-arm.c
index dbef34ed933f..966c6042c5ad 100644
--- a/arch/arm/probes/kprobes/opt-arm.c
+++ b/arch/arm/probes/kprobes/opt-arm.c
@@ -14,7 +14,7 @@
 /* for arm_gen_branch */
 #include <asm/insn.h>
 /* for patch_text */
-#include <asm/patch.h>
+#include <asm/text-patching.h>
 
 #include "core.h"
 
@@ -145,8 +145,6 @@ __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty)
 	}
 }
 
-extern void kprobe_handler(struct pt_regs *regs);
-
 static void
 optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
 {
diff --git a/arch/arm/probes/kprobes/test-core.c b/arch/arm/probes/kprobes/test-core.c
index c562832b8627..171c7076b89f 100644
--- a/arch/arm/probes/kprobes/test-core.c
+++ b/arch/arm/probes/kprobes/test-core.c
@@ -720,7 +720,7 @@ static const char coverage_register_lookup[16] = {
 	[REG_TYPE_NOSPPCX]	= COVERAGE_ANY_REG | COVERAGE_SP,
 };
 
-unsigned coverage_start_registers(const struct decode_header *h)
+static unsigned coverage_start_registers(const struct decode_header *h)
 {
 	unsigned regs = 0;
 	int i;
diff --git a/arch/arm/probes/kprobes/test-core.h b/arch/arm/probes/kprobes/test-core.h
index 56ad3c0aaeea..c7297037c162 100644
--- a/arch/arm/probes/kprobes/test-core.h
+++ b/arch/arm/probes/kprobes/test-core.h
@@ -454,3 +454,7 @@ void kprobe_thumb32_test_cases(void);
 #else
 void kprobe_arm_test_cases(void);
 #endif
+
+void __kprobes_test_case_start(void);
+void __kprobes_test_case_end_16(void);
+void __kprobes_test_case_end_32(void);
diff --git a/arch/arm/probes/uprobes/core.c b/arch/arm/probes/uprobes/core.c
index f5f790c6e5f8..3d96fb41d624 100644
--- a/arch/arm/probes/uprobes/core.c
+++ b/arch/arm/probes/uprobes/core.c
@@ -26,11 +26,11 @@ bool is_swbp_insn(uprobe_opcode_t *insn)
 		(UPROBE_SWBP_ARM_INSN & 0x0fffffff);
 }
 
-int set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm,
+int set_swbp(struct arch_uprobe *auprobe, struct vm_area_struct *vma,
 	     unsigned long vaddr)
 {
-	return uprobe_write_opcode(auprobe, mm, vaddr,
-		   __opcode_to_mem_arm(auprobe->bpinsn));
+	return uprobe_write_opcode(auprobe, vma, vaddr,
+		   __opcode_to_mem_arm(auprobe->bpinsn), true);
 }
 
 bool arch_uprobe_ignore(struct arch_uprobe *auprobe, struct pt_regs *regs)
diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile
index 81f13bdf32f2..28b6da8ac5f6 100644
--- a/arch/arm/tools/Makefile
+++ b/arch/arm/tools/Makefile
@@ -9,7 +9,7 @@ gen := arch/$(ARCH)/include/generated
 kapi := $(gen)/asm
 uapi := $(gen)/uapi/asm
 syshdr := $(srctree)/scripts/syscallhdr.sh
-sysnr := $(srctree)/$(src)/syscallnr.sh
+sysnr := $(src)/syscallnr.sh
 systbl := $(srctree)/scripts/syscalltbl.sh
 syscall := $(src)/syscall.tbl
 
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 9e74c7ff6b04..97e2bfa01f4b 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -7,7 +7,7 @@
 #   http://www.arm.linux.org.uk/developer/machines/download.php
 #
 # Please do not send patches to this file; it is automatically generated!
-# To add an entry into this database, please see Documentation/arm/arm.rst,
+# To add an entry into this database, please see Documentation/arch/arm/arm.rst,
 # or visit:
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl
index ac964612d8b0..b07e699aaa3c 100644
--- a/arch/arm/tools/syscall.tbl
+++ b/arch/arm/tools/syscall.tbl
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
 #
 # Linux system call numbers and entry vectors
 #
@@ -263,7 +264,7 @@
 246	common	io_submit		sys_io_submit
 247	common	io_cancel		sys_io_cancel
 248	common	exit_group		sys_exit_group
-249	common	lookup_dcookie		sys_lookup_dcookie
+249	common	lookup_dcookie		sys_ni_syscall
 250	common	epoll_create		sys_epoll_create
 251	common	epoll_ctl		sys_epoll_ctl		sys_oabi_epoll_ctl
 252	common	epoll_wait		sys_epoll_wait
@@ -464,3 +465,22 @@
 448	common	process_mrelease		sys_process_mrelease
 449	common	futex_waitv			sys_futex_waitv
 450	common	set_mempolicy_home_node		sys_set_mempolicy_home_node
+451	common	cachestat			sys_cachestat
+452	common	fchmodat2			sys_fchmodat2
+453	common	map_shadow_stack		sys_map_shadow_stack
+454	common	futex_wake			sys_futex_wake
+455	common	futex_wait			sys_futex_wait
+456	common	futex_requeue			sys_futex_requeue
+457	common	statmount			sys_statmount
+458	common	listmount			sys_listmount
+459	common	lsm_get_self_attr		sys_lsm_get_self_attr
+460	common	lsm_set_self_attr		sys_lsm_set_self_attr
+461	common	lsm_list_modules		sys_lsm_list_modules
+462	common	mseal				sys_mseal
+463	common	setxattrat			sys_setxattrat
+464	common	getxattrat			sys_getxattrat
+465	common	listxattrat			sys_listxattrat
+466	common	removexattrat			sys_removexattrat
+467	common	open_tree_attr			sys_open_tree_attr
+468	common	file_getattr			sys_file_getattr
+469	common	file_setattr			sys_file_setattr
diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile
index 8ca1c9f262a2..cf8cd39ab804 100644
--- a/arch/arm/vdso/Makefile
+++ b/arch/arm/vdso/Makefile
@@ -1,13 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0
 
-# Absolute relocation type $(ARCH_REL_TYPE_ABS) needs to be defined before
-# the inclusion of generic Makefile.
-ARCH_REL_TYPE_ABS := R_ARM_JUMP_SLOT|R_ARM_GLOB_DAT|R_ARM_ABS32
-include $(srctree)/lib/vdso/Makefile
+# Include the generic Makefile to check the built vdso.
+include $(srctree)/lib/vdso/Makefile.include
 
 hostprogs := vdsomunge
 
-obj-vdso := vgettimeofday.o datapage.o note.o
+obj-vdso := vgettimeofday.o note.o
 
 # Build rules
 targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.so.raw vdso.lds
@@ -28,21 +26,13 @@ CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
 CFLAGS_REMOVE_vdso.o = -pg
 
 # Force -O2 to avoid libgcc dependencies
-CFLAGS_REMOVE_vgettimeofday.o = -pg -Os $(RANDSTRUCT_CFLAGS) $(GCC_PLUGINS_CFLAGS)
+CFLAGS_REMOVE_vgettimeofday.o = -pg -Os $(RANDSTRUCT_CFLAGS) $(KSTACK_ERASE_CFLAGS) $(GCC_PLUGINS_CFLAGS)
 ifeq ($(c-gettimeofday-y),)
 CFLAGS_vgettimeofday.o = -O2
 else
 CFLAGS_vgettimeofday.o = -O2 -include $(c-gettimeofday-y)
 endif
 
-# Disable gcov profiling for VDSO code
-GCOV_PROFILE := n
-
-# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
-KCOV_INSTRUMENT := n
-
-KASAN_SANITIZE := n
-
 # Force dependency
 $(obj)/vdso.o : $(obj)/vdso.so
 
@@ -64,28 +54,3 @@ quiet_cmd_vdsold_and_vdso_check = LD      $@
 
 quiet_cmd_vdsomunge = MUNGE   $@
       cmd_vdsomunge = $(objtree)/$(obj)/vdsomunge $< $@
-
-#
-# Install the unstripped copy of vdso.so.dbg.  If our toolchain
-# supports build-id, install .build-id links as well.
-#
-# Cribbed from arch/x86/vdso/Makefile.
-#
-quiet_cmd_vdso_install = INSTALL $<
-define cmd_vdso_install
-	cp $< "$(MODLIB)/vdso/vdso.so"; \
-	if readelf -n $< | grep -q 'Build ID'; then \
-	  buildid=`readelf -n $< |grep 'Build ID' |sed -e 's/^.*Build ID: \(.*\)$$/\1/'`; \
-	  first=`echo $$buildid | cut -b-2`; \
-	  last=`echo $$buildid | cut -b3-`; \
-	  mkdir -p "$(MODLIB)/vdso/.build-id/$$first"; \
-	  ln -sf "../../vdso.so" "$(MODLIB)/vdso/.build-id/$$first/$$last.debug"; \
-	fi
-endef
-
-$(MODLIB)/vdso: FORCE
-	@mkdir -p $(MODLIB)/vdso
-
-PHONY += vdso_install
-vdso_install: $(obj)/vdso.so.dbg $(MODLIB)/vdso
-	$(call cmd,vdso_install)
diff --git a/arch/arm/vdso/datapage.S b/arch/arm/vdso/datapage.S
deleted file mode 100644
index 9cd73b725d9f..000000000000
--- a/arch/arm/vdso/datapage.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-
-	.align 2
-.L_vdso_data_ptr:
-	.long	_start - . - VDSO_DATA_SIZE
-
-ENTRY(__get_datapage)
-	.fnstart
-	adr	r0, .L_vdso_data_ptr
-	ldr	r1, [r0]
-	add	r0, r0, r1
-	bx	lr
-	.fnend
-ENDPROC(__get_datapage)
diff --git a/arch/arm/vdso/vdso.lds.S b/arch/arm/vdso/vdso.lds.S
index 165d1d2eb76b..7c08371f4400 100644
--- a/arch/arm/vdso/vdso.lds.S
+++ b/arch/arm/vdso/vdso.lds.S
@@ -13,13 +13,14 @@
 #include <linux/const.h>
 #include <asm/page.h>
 #include <asm/vdso.h>
+#include <vdso/datapage.h>
 
 OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
 OUTPUT_ARCH(arm)
 
 SECTIONS
 {
-	PROVIDE(_start = .);
+	VDSO_VVAR_SYMS
 
 	. = SIZEOF_HEADERS;
 
diff --git a/arch/arm/vdso/vgettimeofday.c b/arch/arm/vdso/vgettimeofday.c
index 1976c6f325a4..3554aa35f1ba 100644
--- a/arch/arm/vdso/vgettimeofday.c
+++ b/arch/arm/vdso/vgettimeofday.c
@@ -6,6 +6,9 @@
  */
 #include <linux/time.h>
 #include <linux/types.h>
+#include <asm/vdso.h>
+#include <asm/unwind.h>
+#include <vdso/gettime.h>
 
 int __vdso_clock_gettime(clockid_t clock,
 			 struct old_timespec32 *ts)
diff --git a/arch/arm/vfp/Makefile b/arch/arm/vfp/Makefile
index 749901a72d6d..dfd64bc2b2fb 100644
--- a/arch/arm/vfp/Makefile
+++ b/arch/arm/vfp/Makefile
@@ -8,4 +8,4 @@
 # ccflags-y := -DDEBUG
 # asflags-y := -DDEBUG
 
-obj-y		+= vfpmodule.o entry.o vfphw.o vfpsingle.o vfpdouble.o
+obj-y		+= vfpmodule.o vfphw.o vfpsingle.o vfpdouble.o
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
deleted file mode 100644
index 27b0a1f27fbd..000000000000
--- a/arch/arm/vfp/entry.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  linux/arch/arm/vfp/entry.S
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- */
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <asm/thread_info.h>
-#include <asm/vfpmacros.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-
-@ VFP entry point.
-@
-@  r0  = instruction opcode (32-bit ARM or two 16-bit Thumb)
-@  r2  = PC value to resume execution after successful emulation
-@  r9  = normal "successful" return address
-@  r10 = this threads thread_info structure
-@  lr  = unrecognised instruction return address
-@  IRQs enabled.
-@
-ENTRY(do_vfp)
-	inc_preempt_count r10, r4
- 	ldr	r4, .LCvfp
-	ldr	r11, [r10, #TI_CPU]	@ CPU number
-	add	r10, r10, #TI_VFPSTATE	@ r10 = workspace
-	ldr	pc, [r4]		@ call VFP entry point
-ENDPROC(do_vfp)
-
-ENTRY(vfp_null_entry)
-	dec_preempt_count_ti r10, r4
-	ret	lr
-ENDPROC(vfp_null_entry)
-
-	.align	2
-.LCvfp:
-	.word	vfp_vector
diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h
index 5cd6d5053271..e43a630f8a16 100644
--- a/arch/arm/vfp/vfp.h
+++ b/arch/arm/vfp/vfp.h
@@ -375,3 +375,4 @@ struct op {
 };
 
 asmlinkage void vfp_save_state(void *location, u32 fpexc);
+asmlinkage u32 vfp_load_state(const void *location);
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 6f7926c9c179..d5a03f3c10c5 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -4,12 +4,6 @@
  *
  *  Copyright (C) 2004 ARM Limited.
  *  Written by Deep Blue Solutions Limited.
- *
- * This code is called from the kernel's undefined instruction trap.
- * r9 holds the return address for successful handling.
- * lr holds the return address for unrecognised instructions.
- * r10 points at the start of the private FP workspace in the thread structure
- * sp points to a struct pt_regs (as defined in include/asm/proc/ptrace.h)
  */
 #include <linux/init.h>
 #include <linux/linkage.h>
@@ -19,20 +13,6 @@
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 
-	.macro	DBGSTR, str
-#ifdef DEBUG
-	stmfd	sp!, {r0-r3, ip, lr}
-	ldr	r0, =1f
-	bl	_printk
-	ldmfd	sp!, {r0-r3, ip, lr}
-
-	.pushsection .rodata, "a"
-1:	.ascii	KERN_DEBUG "VFP: \str\n"
-	.byte	0
-	.previous
-#endif
-	.endm
-
 	.macro  DBGSTR1, str, arg
 #ifdef DEBUG
 	stmfd	sp!, {r0-r3, ip, lr}
@@ -48,175 +28,25 @@
 #endif
 	.endm
 
-	.macro  DBGSTR3, str, arg1, arg2, arg3
-#ifdef DEBUG
-	stmfd	sp!, {r0-r3, ip, lr}
-	mov	r3, \arg3
-	mov	r2, \arg2
-	mov	r1, \arg1
-	ldr	r0, =1f
-	bl	_printk
-	ldmfd	sp!, {r0-r3, ip, lr}
-
-	.pushsection .rodata, "a"
-1:	.ascii	KERN_DEBUG "VFP: \str\n"
-	.byte	0
-	.previous
-#endif
-	.endm
-
-
-@ VFP hardware support entry point.
-@
-@  r0  = instruction opcode (32-bit ARM or two 16-bit Thumb)
-@  r2  = PC value to resume execution after successful emulation
-@  r9  = normal "successful" return address
-@  r10 = vfp_state union
-@  r11 = CPU number
-@  lr  = unrecognised instruction return address
-@  IRQs enabled.
-ENTRY(vfp_support_entry)
-	DBGSTR3	"instr %08x pc %08x state %p", r0, r2, r10
-
-	.fpu	vfpv2
-	VFPFMRX	r1, FPEXC		@ Is the VFP enabled?
-	DBGSTR1	"fpexc %08x", r1
-	tst	r1, #FPEXC_EN
-	bne	look_for_VFP_exceptions	@ VFP is already enabled
-
-	DBGSTR1 "enable %x", r10
-	ldr	r3, vfp_current_hw_state_address
-	orr	r1, r1, #FPEXC_EN	@ user FPEXC has the enable bit set
-	ldr	r4, [r3, r11, lsl #2]	@ vfp_current_hw_state pointer
-	bic	r5, r1, #FPEXC_EX	@ make sure exceptions are disabled
-	cmp	r4, r10			@ this thread owns the hw context?
-#ifndef CONFIG_SMP
-	@ For UP, checking that this thread owns the hw context is
-	@ sufficient to determine that the hardware state is valid.
-	beq	vfp_hw_state_valid
-
-	@ On UP, we lazily save the VFP context.  As a different
-	@ thread wants ownership of the VFP hardware, save the old
-	@ state if there was a previous (valid) owner.
-
-	VFPFMXR	FPEXC, r5		@ enable VFP, disable any pending
-					@ exceptions, so we can get at the
-					@ rest of it
-
-	DBGSTR1	"save old state %p", r4
-	cmp	r4, #0			@ if the vfp_current_hw_state is NULL
-	beq	vfp_reload_hw		@ then the hw state needs reloading
-	VFPFSTMIA r4, r5		@ save the working registers
-	VFPFMRX	r5, FPSCR		@ current status
-#ifndef CONFIG_CPU_FEROCEON
-	tst	r1, #FPEXC_EX		@ is there additional state to save?
-	beq	1f
-	VFPFMRX	r6, FPINST		@ FPINST (only if FPEXC.EX is set)
-	tst	r1, #FPEXC_FP2V		@ is there an FPINST2 to read?
-	beq	1f
-	VFPFMRX	r8, FPINST2		@ FPINST2 if needed (and present)
-1:
-#endif
-	stmia	r4, {r1, r5, r6, r8}	@ save FPEXC, FPSCR, FPINST, FPINST2
-vfp_reload_hw:
-
-#else
-	@ For SMP, if this thread does not own the hw context, then we
-	@ need to reload it.  No need to save the old state as on SMP,
-	@ we always save the state when we switch away from a thread.
-	bne	vfp_reload_hw
-
-	@ This thread has ownership of the current hardware context.
-	@ However, it may have been migrated to another CPU, in which
-	@ case the saved state is newer than the hardware context.
-	@ Check this by looking at the CPU number which the state was
-	@ last loaded onto.
-	ldr	ip, [r10, #VFP_CPU]
-	teq	ip, r11
-	beq	vfp_hw_state_valid
-
-vfp_reload_hw:
-	@ We're loading this threads state into the VFP hardware. Update
-	@ the CPU number which contains the most up to date VFP context.
-	str	r11, [r10, #VFP_CPU]
-
-	VFPFMXR	FPEXC, r5		@ enable VFP, disable any pending
-					@ exceptions, so we can get at the
-					@ rest of it
-#endif
-
-	DBGSTR1	"load state %p", r10
-	str	r10, [r3, r11, lsl #2]	@ update the vfp_current_hw_state pointer
+ENTRY(vfp_load_state)
+	@ Load the current VFP state
+	@ r0 - load location
+	@ returns FPEXC
+	DBGSTR1	"load VFP state %p", r0
 					@ Load the saved state back into the VFP
-	VFPFLDMIA r10, r5		@ reload the working registers while
+	VFPFLDMIA r0, r1		@ reload the working registers while
 					@ FPEXC is in a safe state
-	ldmia	r10, {r1, r5, r6, r8}	@ load FPEXC, FPSCR, FPINST, FPINST2
-#ifndef CONFIG_CPU_FEROCEON
-	tst	r1, #FPEXC_EX		@ is there additional state to restore?
+	ldmia	r0, {r0-r3}		@ load FPEXC, FPSCR, FPINST, FPINST2
+	tst	r0, #FPEXC_EX		@ is there additional state to restore?
 	beq	1f
-	VFPFMXR	FPINST, r6		@ restore FPINST (only if FPEXC.EX is set)
-	tst	r1, #FPEXC_FP2V		@ is there an FPINST2 to write?
+	VFPFMXR	FPINST, r2		@ restore FPINST (only if FPEXC.EX is set)
+	tst	r0, #FPEXC_FP2V		@ is there an FPINST2 to write?
 	beq	1f
-	VFPFMXR	FPINST2, r8		@ FPINST2 if needed (and present)
+	VFPFMXR	FPINST2, r3		@ FPINST2 if needed (and present)
 1:
-#endif
-	VFPFMXR	FPSCR, r5		@ restore status
-
-@ The context stored in the VFP hardware is up to date with this thread
-vfp_hw_state_valid:
-	tst	r1, #FPEXC_EX
-	bne	process_exception	@ might as well handle the pending
-					@ exception before retrying branch
-					@ out before setting an FPEXC that
-					@ stops us reading stuff
-	VFPFMXR	FPEXC, r1		@ Restore FPEXC last
-	sub	r2, r2, #4		@ Retry current instruction - if Thumb
-	str	r2, [sp, #S_PC]		@ mode it's two 16-bit instructions,
-					@ else it's one 32-bit instruction, so
-					@ always subtract 4 from the following
-					@ instruction address.
-	dec_preempt_count_ti r10, r4
-	ret	r9			@ we think we have handled things
-
-
-look_for_VFP_exceptions:
-	@ Check for synchronous or asynchronous exception
-	tst	r1, #FPEXC_EX | FPEXC_DEX
-	bne	process_exception
-	@ On some implementations of the VFP subarch 1, setting FPSCR.IXE
-	@ causes all the CDP instructions to be bounced synchronously without
-	@ setting the FPEXC.EX bit
-	VFPFMRX	r5, FPSCR
-	tst	r5, #FPSCR_IXE
-	bne	process_exception
-
-	tst	r5, #FPSCR_LENGTH_MASK
-	beq	skip
-	orr	r1, r1, #FPEXC_DEX
-	b	process_exception
-skip:
-
-	@ Fall into hand on to next handler - appropriate coproc instr
-	@ not recognised by VFP
-
-	DBGSTR	"not VFP"
-	dec_preempt_count_ti r10, r4
+	VFPFMXR	FPSCR, r1		@ restore status
 	ret	lr
-
-process_exception:
-	DBGSTR	"bounce"
-	mov	r2, sp			@ nothing stacked - regdump is at TOS
-	mov	lr, r9			@ setup for a return to the user code.
-
-	@ Now call the C code to package up the bounce to the support code
-	@   r0 holds the trigger instruction
-	@   r1 holds the FPEXC value
-	@   r2 pointer to register dump
-	b	VFP_bounce		@ we have handled this - the support
-					@ code will raise an exception if
-					@ required. If not, the user code will
-					@ retry the faulted instruction
-ENDPROC(vfp_support_entry)
+ENDPROC(vfp_load_state)
 
 ENTRY(vfp_save_state)
 	@ Save the current VFP state
@@ -236,10 +66,6 @@ ENTRY(vfp_save_state)
 	ret	lr
 ENDPROC(vfp_save_state)
 
-	.align
-vfp_current_hw_state_address:
-	.word	vfp_current_hw_state
-
 	.macro	tbl_branch, base, tmp, shift
 #ifdef CONFIG_THUMB2_KERNEL
 	adr	\tmp, 1f
diff --git a/arch/arm/vfp/vfpinstr.h b/arch/arm/vfp/vfpinstr.h
index 3c7938fd40aa..a2f0c47e0ce7 100644
--- a/arch/arm/vfp/vfpinstr.h
+++ b/arch/arm/vfp/vfpinstr.h
@@ -62,37 +62,19 @@
 #define FPSCR_C (1 << 29)
 #define FPSCR_V	(1 << 28)
 
-#ifdef CONFIG_AS_VFP_VMRS_FPINST
-
-#define fmrx(_vfp_) ({			\
-	u32 __v;			\
-	asm(".fpu	vfpv2\n"	\
-	    "vmrs	%0, " #_vfp_	\
-	    : "=r" (__v) : : "cc");	\
-	__v;				\
- })
-
-#define fmxr(_vfp_,_var_)		\
-	asm(".fpu	vfpv2\n"	\
-	    "vmsr	" #_vfp_ ", %0"	\
-	   : : "r" (_var_) : "cc")
-
-#else
-
-#define vfpreg(_vfp_) #_vfp_
-
-#define fmrx(_vfp_) ({			\
-	u32 __v;			\
-	asm("mrc p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmrx	%0, " #_vfp_	\
-	    : "=r" (__v) : : "cc");	\
-	__v;				\
- })
-
-#define fmxr(_vfp_,_var_)		\
-	asm("mcr p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmxr	" #_vfp_ ", %0"	\
-	   : : "r" (_var_) : "cc")
-
-#endif
+#define fmrx(_vfp_) ({				\
+	u32 __v;				\
+	asm volatile (".fpu	vfpv2\n"	\
+		      "vmrs	%0, " #_vfp_	\
+		     : "=r" (__v) : : "cc");	\
+	__v;					\
+})
+
+#define fmxr(_vfp_, _var_) ({			\
+	asm volatile (".fpu	vfpv2\n"	\
+		      "vmsr	" #_vfp_ ", %0"	\
+		     : : "r" (_var_) : "cc");	\
+})
 
 u32 vfp_single_cpdo(u32 inst, u32 fpscr);
 u32 vfp_single_cprt(u32 inst, u32 fpscr, struct pt_regs *regs);
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 2cb355c1b5b7..e559ad3cd148 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -18,6 +18,7 @@
 #include <linux/uaccess.h>
 #include <linux/user.h>
 #include <linux/export.h>
+#include <linux/perf_event.h>
 
 #include <asm/cp15.h>
 #include <asm/cputype.h>
@@ -25,24 +26,23 @@
 #include <asm/thread_notify.h>
 #include <asm/traps.h>
 #include <asm/vfp.h>
+#include <asm/neon.h>
 
 #include "vfpinstr.h"
 #include "vfp.h"
 
-/*
- * Our undef handlers (in entry.S)
- */
-asmlinkage void vfp_support_entry(void);
-asmlinkage void vfp_null_entry(void);
-
-asmlinkage void (*vfp_vector)(void) = vfp_null_entry;
+static bool have_vfp __ro_after_init;
 
 /*
  * Dual-use variable.
  * Used in startup: set to non-zero if VFP checks fail
  * After startup, holds VFP architecture
  */
-static unsigned int __initdata VFP_arch;
+static unsigned int VFP_arch;
+
+#ifdef CONFIG_CPU_FEROCEON
+extern unsigned int VFP_arch_feroceon __alias(VFP_arch);
+#endif
 
 /*
  * The pointer to the vfpstate structure of the thread which currently
@@ -56,6 +56,34 @@ static unsigned int __initdata VFP_arch;
 union vfp_state *vfp_current_hw_state[NR_CPUS];
 
 /*
+ * Claim ownership of the VFP unit.
+ *
+ * The caller may change VFP registers until vfp_state_release() is called.
+ *
+ * local_bh_disable() is used to disable preemption and to disable VFP
+ * processing in softirq context. On PREEMPT_RT kernels local_bh_disable() is
+ * not sufficient because it only serializes soft interrupt related sections
+ * via a local lock, but stays preemptible. Disabling preemption is the right
+ * choice here as bottom half processing is always in thread context on RT
+ * kernels so it implicitly prevents bottom half processing as well.
+ */
+static void vfp_state_hold(void)
+{
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
+		local_bh_disable();
+	else
+		preempt_disable();
+}
+
+static void vfp_state_release(void)
+{
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
+		local_bh_enable();
+	else
+		preempt_enable();
+}
+
+/*
  * Is 'thread's most up to date state stored in this CPUs hardware?
  * Must be called from non-preemptible context.
  */
@@ -140,7 +168,7 @@ static void vfp_thread_copy(struct thread_info *thread)
 /*
  * When this function is called with the following 'cmd's, the following
  * is true while this function is being run:
- *  THREAD_NOFTIFY_SWTICH:
+ *  THREAD_NOTIFY_SWITCH:
  *   - the previously running thread will not be scheduled onto another CPU.
  *   - the next thread to be run (v) will not be running on another CPU.
  *   - thread->cpu is the local CPU number
@@ -240,7 +268,7 @@ static void vfp_panic(char *reason, u32 inst)
 /*
  * Process bitmask of exception conditions.
  */
-static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_regs *regs)
+static int vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr)
 {
 	int si_code = 0;
 
@@ -248,8 +276,7 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_
 
 	if (exceptions == VFP_EXCEPTION_ERROR) {
 		vfp_panic("unhandled bounce", inst);
-		vfp_raise_sigfpe(FPE_FLTINV, regs);
-		return;
+		return FPE_FLTINV;
 	}
 
 	/*
@@ -277,8 +304,7 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_
 	RAISE(FPSCR_OFC, FPSCR_OFE, FPE_FLTOVF);
 	RAISE(FPSCR_IOC, FPSCR_IOE, FPE_FLTINV);
 
-	if (si_code)
-		vfp_raise_sigfpe(si_code, regs);
+	return si_code;
 }
 
 /*
@@ -314,15 +340,18 @@ static u32 vfp_emulate_instruction(u32 inst, u32 fpscr, struct pt_regs *regs)
 		 * emulate it.
 		 */
 	}
+	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->ARM_pc);
 	return exceptions & ~VFP_NAN_FLAG;
 }
 
 /*
  * Package up a bounce condition.
  */
-void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
+static void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
 {
 	u32 fpscr, orig_fpscr, fpsid, exceptions;
+	int si_code2 = 0;
+	int si_code = 0;
 
 	pr_debug("VFP: bounce: trigger %08x fpexc %08x\n", trigger, fpexc);
 
@@ -356,21 +385,19 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
 	}
 
 	if (fpexc & FPEXC_EX) {
-#ifndef CONFIG_CPU_FEROCEON
 		/*
 		 * Asynchronous exception. The instruction is read from FPINST
 		 * and the interrupted instruction has to be restarted.
 		 */
 		trigger = fmrx(FPINST);
 		regs->ARM_pc -= 4;
-#endif
 	} else if (!(fpexc & FPEXC_DEX)) {
 		/*
 		 * Illegal combination of bits. It can be caused by an
 		 * unallocated VFP instruction but with FPSCR.IXE set and not
 		 * on VFP subarch 1.
 		 */
-		 vfp_raise_exceptions(VFP_EXCEPTION_ERROR, trigger, fpscr, regs);
+		si_code = vfp_raise_exceptions(VFP_EXCEPTION_ERROR, trigger, fpscr);
 		goto exit;
 	}
 
@@ -395,7 +422,7 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
 	 */
 	exceptions = vfp_emulate_instruction(trigger, fpscr, regs);
 	if (exceptions)
-		vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs);
+		si_code2 = vfp_raise_exceptions(exceptions, trigger, orig_fpscr);
 
 	/*
 	 * If there isn't a second FP instruction, exit now. Note that
@@ -414,9 +441,13 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
  emulate:
 	exceptions = vfp_emulate_instruction(trigger, orig_fpscr, regs);
 	if (exceptions)
-		vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs);
- exit:
-	preempt_enable();
+		si_code = vfp_raise_exceptions(exceptions, trigger, orig_fpscr);
+exit:
+	vfp_state_release();
+	if (si_code2)
+		vfp_raise_sigfpe(si_code2, regs);
+	if (si_code)
+		vfp_raise_sigfpe(si_code, regs);
 }
 
 static void vfp_enable(void *unused)
@@ -515,9 +546,9 @@ static inline void vfp_pm_init(void) { }
  */
 void vfp_sync_hwstate(struct thread_info *thread)
 {
-	unsigned int cpu = get_cpu();
+	vfp_state_hold();
 
-	if (vfp_state_in_hw(cpu, thread)) {
+	if (vfp_state_in_hw(raw_smp_processor_id(), thread)) {
 		u32 fpexc = fmrx(FPEXC);
 
 		/*
@@ -528,7 +559,7 @@ void vfp_sync_hwstate(struct thread_info *thread)
 		fmxr(FPEXC, fpexc);
 	}
 
-	put_cpu();
+	vfp_state_release();
 }
 
 /* Ensure that the thread reloads the hardware VFP state on the next use. */
@@ -642,8 +673,6 @@ static int vfp_starting_cpu(unsigned int unused)
 	return 0;
 }
 
-#ifdef CONFIG_KERNEL_MODE_NEON
-
 static int vfp_kmode_exception(struct pt_regs *regs, unsigned int instr)
 {
 	/*
@@ -666,47 +695,170 @@ static int vfp_kmode_exception(struct pt_regs *regs, unsigned int instr)
 	return 1;
 }
 
-static struct undef_hook vfp_kmode_exception_hook[] = {{
+/*
+ * vfp_support_entry - Handle VFP exception
+ *
+ * @regs:	pt_regs structure holding the register state at exception entry
+ * @trigger:	The opcode of the instruction that triggered the exception
+ *
+ * Returns 0 if the exception was handled, or an error code otherwise.
+ */
+static int vfp_support_entry(struct pt_regs *regs, u32 trigger)
+{
+	struct thread_info *ti = current_thread_info();
+	u32 fpexc;
+
+	if (unlikely(!have_vfp))
+		return -ENODEV;
+
+	if (!user_mode(regs))
+		return vfp_kmode_exception(regs, trigger);
+
+	vfp_state_hold();
+	fpexc = fmrx(FPEXC);
+
+	/*
+	 * If the VFP unit was not enabled yet, we have to check whether the
+	 * VFP state in the CPU's registers is the most recent VFP state
+	 * associated with the process. On UP systems, we don't save the VFP
+	 * state eagerly on a context switch, so we may need to save the
+	 * VFP state to memory first, as it may belong to another process.
+	 */
+	if (!(fpexc & FPEXC_EN)) {
+		/*
+		 * Enable the VFP unit but mask the FP exception flag for the
+		 * time being, so we can access all the registers.
+		 */
+		fpexc |= FPEXC_EN;
+		fmxr(FPEXC, fpexc & ~FPEXC_EX);
+
+		/*
+		 * Check whether or not the VFP state in the CPU's registers is
+		 * the most recent VFP state associated with this task. On SMP,
+		 * migration may result in multiple CPUs holding VFP states
+		 * that belong to the same task, but only the most recent one
+		 * is valid.
+		 */
+		if (!vfp_state_in_hw(ti->cpu, ti)) {
+			if (!IS_ENABLED(CONFIG_SMP) &&
+			    vfp_current_hw_state[ti->cpu] != NULL) {
+				/*
+				 * This CPU is currently holding the most
+				 * recent VFP state associated with another
+				 * task, and we must save that to memory first.
+				 */
+				vfp_save_state(vfp_current_hw_state[ti->cpu],
+					       fpexc);
+			}
+
+			/*
+			 * We can now proceed with loading the task's VFP state
+			 * from memory into the CPU registers.
+			 */
+			fpexc = vfp_load_state(&ti->vfpstate);
+			vfp_current_hw_state[ti->cpu] = &ti->vfpstate;
+#ifdef CONFIG_SMP
+			/*
+			 * Record that this CPU is now the one holding the most
+			 * recent VFP state of the task.
+			 */
+			ti->vfpstate.hard.cpu = ti->cpu;
+#endif
+		}
+
+		if (fpexc & FPEXC_EX)
+			/*
+			 * Might as well handle the pending exception before
+			 * retrying branch out before setting an FPEXC that
+			 * stops us reading stuff.
+			 */
+			goto bounce;
+
+		/*
+		 * No FP exception is pending: just enable the VFP and
+		 * replay the instruction that trapped.
+		 */
+		fmxr(FPEXC, fpexc);
+		vfp_state_release();
+	} else {
+		/* Check for synchronous or asynchronous exceptions */
+		if (!(fpexc & (FPEXC_EX | FPEXC_DEX))) {
+			u32 fpscr = fmrx(FPSCR);
+
+			/*
+			 * On some implementations of the VFP subarch 1,
+			 * setting FPSCR.IXE causes all the CDP instructions to
+			 * be bounced synchronously without setting the
+			 * FPEXC.EX bit
+			 */
+			if (!(fpscr & FPSCR_IXE)) {
+				if (!(fpscr & FPSCR_LENGTH_MASK)) {
+					pr_debug("not VFP\n");
+					vfp_state_release();
+					return -ENOEXEC;
+				}
+				fpexc |= FPEXC_DEX;
+			}
+		}
+bounce:		regs->ARM_pc += 4;
+		/* VFP_bounce() will invoke vfp_state_release() */
+		VFP_bounce(trigger, fpexc, regs);
+	}
+
+	return 0;
+}
+
+static struct undef_hook neon_support_hook[] = {{
 	.instr_mask	= 0xfe000000,
 	.instr_val	= 0xf2000000,
-	.cpsr_mask	= MODE_MASK | PSR_T_BIT,
-	.cpsr_val	= SVC_MODE,
-	.fn		= vfp_kmode_exception,
+	.cpsr_mask	= PSR_T_BIT,
+	.cpsr_val	= 0,
+	.fn		= vfp_support_entry,
 }, {
 	.instr_mask	= 0xff100000,
 	.instr_val	= 0xf4000000,
-	.cpsr_mask	= MODE_MASK | PSR_T_BIT,
-	.cpsr_val	= SVC_MODE,
-	.fn		= vfp_kmode_exception,
+	.cpsr_mask	= PSR_T_BIT,
+	.cpsr_val	= 0,
+	.fn		= vfp_support_entry,
 }, {
 	.instr_mask	= 0xef000000,
 	.instr_val	= 0xef000000,
-	.cpsr_mask	= MODE_MASK | PSR_T_BIT,
-	.cpsr_val	= SVC_MODE | PSR_T_BIT,
-	.fn		= vfp_kmode_exception,
+	.cpsr_mask	= PSR_T_BIT,
+	.cpsr_val	= PSR_T_BIT,
+	.fn		= vfp_support_entry,
 }, {
 	.instr_mask	= 0xff100000,
 	.instr_val	= 0xf9000000,
-	.cpsr_mask	= MODE_MASK | PSR_T_BIT,
-	.cpsr_val	= SVC_MODE | PSR_T_BIT,
-	.fn		= vfp_kmode_exception,
+	.cpsr_mask	= PSR_T_BIT,
+	.cpsr_val	= PSR_T_BIT,
+	.fn		= vfp_support_entry,
 }, {
-	.instr_mask	= 0x0c000e00,
-	.instr_val	= 0x0c000a00,
-	.cpsr_mask	= MODE_MASK,
-	.cpsr_val	= SVC_MODE,
-	.fn		= vfp_kmode_exception,
+	.instr_mask	= 0xff000800,
+	.instr_val	= 0xfc000800,
+	.cpsr_mask	= 0,
+	.cpsr_val	= 0,
+	.fn		= vfp_support_entry,
+}, {
+	.instr_mask	= 0xff000800,
+	.instr_val	= 0xfd000800,
+	.cpsr_mask	= 0,
+	.cpsr_val	= 0,
+	.fn		= vfp_support_entry,
+}, {
+	.instr_mask	= 0xff000800,
+	.instr_val	= 0xfe000800,
+	.cpsr_mask	= 0,
+	.cpsr_val	= 0,
+	.fn		= vfp_support_entry,
 }};
 
-static int __init vfp_kmode_exception_hook_init(void)
-{
-	int i;
+static struct undef_hook vfp_support_hook = {
+	.instr_mask	= 0x0c000e00,
+	.instr_val	= 0x0c000a00,
+	.fn		= vfp_support_entry,
+};
 
-	for (i = 0; i < ARRAY_SIZE(vfp_kmode_exception_hook); i++)
-		register_undef_hook(&vfp_kmode_exception_hook[i]);
-	return 0;
-}
-subsys_initcall(vfp_kmode_exception_hook_init);
+#ifdef CONFIG_KERNEL_MODE_NEON
 
 /*
  * Kernel-side NEON support functions
@@ -717,13 +869,16 @@ void kernel_neon_begin(void)
 	unsigned int cpu;
 	u32 fpexc;
 
+	vfp_state_hold();
+
 	/*
-	 * Kernel mode NEON is only allowed outside of interrupt context
-	 * with preemption disabled. This will make sure that the kernel
-	 * mode NEON register contents never need to be preserved.
+	 * Kernel mode NEON is only allowed outside of hardirq context with
+	 * preemption and softirq processing disabled. This will make sure that
+	 * the kernel mode NEON register contents never need to be preserved.
 	 */
-	BUG_ON(in_interrupt());
-	cpu = get_cpu();
+	BUG_ON(in_hardirq());
+	BUG_ON(irqs_disabled());
+	cpu = __smp_processor_id();
 
 	fpexc = fmrx(FPEXC) | FPEXC_EN;
 	fmxr(FPEXC, fpexc);
@@ -746,7 +901,7 @@ void kernel_neon_end(void)
 {
 	/* Disable the NEON/VFP unit. */
 	fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
-	put_cpu();
+	vfp_state_release();
 }
 EXPORT_SYMBOL(kernel_neon_end);
 
@@ -774,6 +929,7 @@ static int __init vfp_init(void)
 {
 	unsigned int vfpsid;
 	unsigned int cpu_arch = cpu_architecture();
+	unsigned int isar6;
 
 	/*
 	 * Enable the access to the VFP on all online CPUs so the
@@ -792,7 +948,6 @@ static int __init vfp_init(void)
 	vfpsid = fmrx(FPSID);
 	barrier();
 	unregister_undef_hook(&vfp_detect_hook);
-	vfp_vector = vfp_null_entry;
 
 	pr_info("VFP support v0.3: ");
 	if (VFP_arch) {
@@ -809,8 +964,11 @@ static int __init vfp_init(void)
 		 * for NEON if the hardware has the MVFR registers.
 		 */
 		if (IS_ENABLED(CONFIG_NEON) &&
-		   (fmrx(MVFR1) & 0x000fff00) == 0x00011100)
+		    (fmrx(MVFR1) & 0x000fff00) == 0x00011100) {
 			elf_hwcap |= HWCAP_NEON;
+			for (int i = 0; i < ARRAY_SIZE(neon_support_hook); i++)
+				register_undef_hook(&neon_support_hook[i]);
+		}
 
 		if (IS_ENABLED(CONFIG_VFPv3)) {
 			u32 mvfr0 = fmrx(MVFR0);
@@ -831,7 +989,38 @@ static int __init vfp_init(void)
 
 			if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000)
 				elf_hwcap |= HWCAP_VFPv4;
+			if (((fmrx(MVFR1) & MVFR1_ASIMDHP_MASK) >> MVFR1_ASIMDHP_BIT) == 0x2)
+				elf_hwcap |= HWCAP_ASIMDHP;
+			if (((fmrx(MVFR1) & MVFR1_FPHP_MASK) >> MVFR1_FPHP_BIT) == 0x3)
+				elf_hwcap |= HWCAP_FPHP;
 		}
+
+		/*
+		 * Check for the presence of Advanced SIMD Dot Product
+		 * instructions.
+		 */
+		isar6 = read_cpuid_ext(CPUID_EXT_ISAR6);
+		if (cpuid_feature_extract_field(isar6, 4) == 0x1)
+			elf_hwcap |= HWCAP_ASIMDDP;
+		/*
+		 * Check for the presence of Advanced SIMD Floating point
+		 * half-precision multiplication instructions.
+		 */
+		if (cpuid_feature_extract_field(isar6, 8) == 0x1)
+			elf_hwcap |= HWCAP_ASIMDFHM;
+		/*
+		 * Check for the presence of Advanced SIMD Bfloat16
+		 * floating point instructions.
+		 */
+		if (cpuid_feature_extract_field(isar6, 20) == 0x1)
+			elf_hwcap |= HWCAP_ASIMDBF16;
+		/*
+		 * Check for the presence of Advanced SIMD and floating point
+		 * Int8 matrix multiplication instructions instructions.
+		 */
+		if (cpuid_feature_extract_field(isar6, 24) == 0x1)
+			elf_hwcap |= HWCAP_I8MM;
+
 	/* Extract the architecture version on pre-cpuid scheme */
 	} else {
 		if (vfpsid & FPSID_NODOUBLE) {
@@ -846,8 +1035,9 @@ static int __init vfp_init(void)
 				  "arm/vfp:starting", vfp_starting_cpu,
 				  vfp_dying_cpu);
 
-	vfp_vector = vfp_support_entry;
+	have_vfp = true;
 
+	register_undef_hook(&vfp_support_hook);
 	thread_register_notifier(&vfp_notifier_block);
 	vfp_pm_init();
 
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index 93c8ccbf2982..8655bc3d3634 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -164,9 +164,6 @@ static int xen_starting_cpu(unsigned int cpu)
 	BUG_ON(err);
 	per_cpu(xen_vcpu, cpu) = vcpup;
 
-	if (!xen_kernel_unmapped_at_usr())
-		xen_setup_runstate_info(cpu);
-
 after_register_vcpu_info:
 	enable_percpu_irq(xen_events_irq, 0);
 	return 0;
@@ -207,7 +204,7 @@ static void xen_power_off(void)
 
 static irqreturn_t xen_arm_callback(int irq, void *arg)
 {
-	xen_hvm_evtchn_do_upcall();
+	xen_evtchn_do_upcall();
 	return IRQ_HANDLED;
 }
 
@@ -445,7 +442,7 @@ static int __init xen_guest_init(void)
 		return 0;
 
 	if (IS_ENABLED(CONFIG_XEN_VIRTIO))
-		virtio_set_mem_acc_cb(xen_virtio_mem_acc);
+		virtio_set_mem_acc_cb(xen_virtio_restricted_mem_acc);
 
 	if (!acpi_disabled)
 		xen_acpi_guest_init();
@@ -487,7 +484,8 @@ static int __init xen_guest_init(void)
 	 * for secondary CPUs as they are brought up.
 	 * For uniformity we use VCPUOP_register_vcpu_info even on cpu0.
 	 */
-	xen_vcpu_info = alloc_percpu(struct vcpu_info);
+	xen_vcpu_info = __alloc_percpu(sizeof(struct vcpu_info),
+				       1 << fls(sizeof(struct vcpu_info) - 1));
 	if (xen_vcpu_info == NULL)
 		return -ENOMEM;
 
@@ -523,9 +521,6 @@ static int __init xen_guest_init(void)
 		return -EINVAL;
 	}
 
-	if (!xen_kernel_unmapped_at_usr())
-		xen_time_setup_guest();
-
 	if (xen_initial_domain())
 		pvclock_gtod_register_notifier(&xen_pvclock_gtod_notifier);
 
@@ -535,12 +530,18 @@ static int __init xen_guest_init(void)
 }
 early_initcall(xen_guest_init);
 
-static int __init xen_pm_init(void)
+static int xen_starting_runstate_cpu(unsigned int cpu)
+{
+	xen_setup_runstate_info(cpu);
+	return 0;
+}
+
+static int __init xen_late_init(void)
 {
 	if (!xen_domain())
 		return -ENODEV;
 
-	pm_power_off = xen_power_off;
+	register_platform_power_off(xen_power_off);
 	register_restart_handler(&xen_restart_nb);
 	if (!xen_initial_domain()) {
 		struct timespec64 ts;
@@ -548,9 +549,16 @@ static int __init xen_pm_init(void)
 		do_settimeofday64(&ts);
 	}
 
-	return 0;
+	if (xen_kernel_unmapped_at_usr())
+		return 0;
+
+	xen_time_setup_guest();
+
+	return cpuhp_setup_state(CPUHP_AP_ARM_XEN_RUNSTATE_STARTING,
+				 "arm/xen_runstate:starting",
+				 xen_starting_runstate_cpu, NULL);
 }
-late_initcall(xen_pm_init);
+late_initcall(xen_late_init);
 
 
 /* empty stubs */
diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c
index 3d826c0b5fee..882cd70c7a2f 100644
--- a/arch/arm/xen/mm.c
+++ b/arch/arm/xen/mm.c
@@ -125,12 +125,10 @@ static int __init xen_mm_init(void)
 		return 0;
 
 	/* we can work with the default swiotlb */
-	if (!io_tlb_default_mem.nslabs) {
-		rc = swiotlb_init_late(swiotlb_size_or_default(),
-				       xen_swiotlb_gfp(), NULL);
-		if (rc < 0)
-			return rc;
-	}
+	rc = swiotlb_init_late(swiotlb_size_or_default(),
+			       xen_swiotlb_gfp(), NULL);
+	if (rc < 0)
+		return rc;
 
 	cflush.op = 0;
 	cflush.a.dev_bus_addr = 0;
diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c
index 309648c17f48..9da57a5b81c7 100644
--- a/arch/arm/xen/p2m.c
+++ b/arch/arm/xen/p2m.c
@@ -109,7 +109,7 @@ int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops,
 		 * immediate unmapping.
 		 */
 		map_ops[i].status = GNTST_general_error;
-		unmap.host_addr = map_ops[i].host_addr,
+		unmap.host_addr = map_ops[i].host_addr;
 		unmap.handle = map_ops[i].handle;
 		map_ops[i].handle = INVALID_GRANT_HANDLE;
 		if (map_ops[i].flags & GNTMAP_device_map)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 571cc234d0b3..6663ffd23f25 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1,9 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config ARM64
 	def_bool y
+	select ACPI_APMT if ACPI
 	select ACPI_CCA_REQUIRED if ACPI
 	select ACPI_GENERIC_GSI if ACPI
 	select ACPI_GTDT if ACPI
+	select ACPI_HOTPLUG_CPU if ACPI_PROCESSOR && HOTPLUG_CPU
 	select ACPI_IORT if ACPI
 	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
 	select ACPI_MCFG if (ACPI && PCI)
@@ -12,16 +14,17 @@ config ARM64
 	select ARCH_HAS_DEBUG_WX
 	select ARCH_BINFMT_ELF_EXTRA_PHDRS
 	select ARCH_BINFMT_ELF_STATE
-	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
 	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
 	select ARCH_ENABLE_MEMORY_HOTPLUG
 	select ARCH_ENABLE_MEMORY_HOTREMOVE
 	select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
 	select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
 	select ARCH_HAS_CACHE_LINE_SIZE
+	select ARCH_HAS_CC_PLATFORM
 	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL
 	select ARCH_HAS_DEBUG_VM_PGTABLE
+	select ARCH_HAS_DMA_OPS if XEN
 	select ARCH_HAS_DMA_PREP_COHERENT
 	select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
 	select ARCH_HAS_FAST_MULTIPLIER
@@ -29,21 +32,29 @@ config ARM64
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_HAS_GIGANTIC_PAGE
 	select ARCH_HAS_KCOV
+	select ARCH_HAS_KERNEL_FPU_SUPPORT if KERNEL_MODE_NEON
 	select ARCH_HAS_KEEPINITRD
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_MEM_ENCRYPT
+	select ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
+	select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
-	select ARCH_HAS_PTE_DEVMAP
+	select ARCH_HAS_NONLEAF_PMD_YOUNG if ARM64_HAFT
+	select ARCH_HAS_PREEMPT_LAZY
+	select ARCH_HAS_PTDUMP
 	select ARCH_HAS_PTE_SPECIAL
+	select ARCH_HAS_HW_PTE_YOUNG
 	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_SET_DIRECT_MAP
 	select ARCH_HAS_SET_MEMORY
+	select ARCH_HAS_MEM_ENCRYPT
+	select ARCH_HAS_FORCE_DMA_UNENCRYPTED
 	select ARCH_STACKWALK
 	select ARCH_HAS_STRICT_KERNEL_RWX
 	select ARCH_HAS_STRICT_MODULE_RWX
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_SYSCALL_WRAPPER
-	select ARCH_HAS_TEARDOWN_DMA_OPS if IOMMU_SUPPORT
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAS_ZONE_DMA_SET if EXPERT
 	select ARCH_HAVE_ELF_PROT
@@ -76,6 +87,7 @@ config ARM64
 	select ARCH_INLINE_SPIN_UNLOCK_IRQ if !PREEMPTION
 	select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE if !PREEMPTION
 	select ARCH_KEEP_MEMBLOCK
+	select ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_USE_GNU_PROPERTY
 	select ARCH_USE_MEMTEST
@@ -88,21 +100,28 @@ config ARM64
 	select ARCH_SUPPORTS_SHADOW_CALL_STACK if CC_HAVE_SHADOW_CALL_STACK
 	select ARCH_SUPPORTS_LTO_CLANG if CPU_LITTLE_ENDIAN
 	select ARCH_SUPPORTS_LTO_CLANG_THIN
-	select ARCH_SUPPORTS_CFI_CLANG
+	select ARCH_SUPPORTS_CFI
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
 	select ARCH_SUPPORTS_NUMA_BALANCING
 	select ARCH_SUPPORTS_PAGE_TABLE_CHECK
+	select ARCH_SUPPORTS_PER_VMA_LOCK
+	select ARCH_SUPPORTS_HUGE_PFNMAP if TRANSPARENT_HUGEPAGE
+	select ARCH_SUPPORTS_RT
+	select ARCH_SUPPORTS_SCHED_SMT
+	select ARCH_SUPPORTS_SCHED_CLUSTER
+	select ARCH_SUPPORTS_SCHED_MC
+	select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
 	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT
 	select ARCH_WANT_DEFAULT_BPF_JIT
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_HUGE_PMD_SHARE if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36)
-	select ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
 	select ARCH_WANT_LD_ORPHAN_WARN
+	select ARCH_WANTS_EXECMEM_LATE
 	select ARCH_WANTS_NO_INSTR
 	select ARCH_WANTS_THP_SWAP if ARM64_4K_PAGES
-	select ARCH_HAS_UBSAN_SANITIZE_ALL
+	select ARCH_HAS_UBSAN
 	select ARM_AMBA
 	select ARM_ARCH_TIMER
 	select ARM_GIC
@@ -110,62 +129,71 @@ config ARM64
 	select ARM_GIC_V2M if PCI
 	select ARM_GIC_V3
 	select ARM_GIC_V3_ITS if PCI
+	select ARM_GIC_V5
 	select ARM_PSCI_FW
 	select BUILDTIME_TABLE_SORT
 	select CLONE_BACKWARDS
 	select COMMON_CLK
 	select CPU_PM if (SUSPEND || CPU_IDLE)
-	select CRC32
+	select CPUMASK_OFFSTACK if NR_CPUS > 256
 	select DCACHE_WORD_ACCESS
+	select HAVE_EXTRA_IPI_TRACEPOINTS
+	select DYNAMIC_FTRACE if FUNCTION_TRACER
+	select DMA_BOUNCE_UNALIGNED_KMALLOC
 	select DMA_DIRECT_REMAP
 	select EDAC_SUPPORT
 	select FRAME_POINTER
+	select FUNCTION_ALIGNMENT_4B
+	select FUNCTION_ALIGNMENT_8B if DYNAMIC_FTRACE_WITH_CALL_OPS
 	select GENERIC_ALLOCATOR
 	select GENERIC_ARCH_TOPOLOGY
 	select GENERIC_CLOCKEVENTS_BROADCAST
 	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_CPU_DEVICES
 	select GENERIC_CPU_VULNERABILITIES
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IOREMAP
+	select GENERIC_IRQ_ENTRY
 	select GENERIC_IRQ_IPI
+	select GENERIC_IRQ_KEXEC_CLEAR_VM_FORWARD
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
 	select GENERIC_LIB_DEVMEM_IS_ALLOWED
 	select GENERIC_PCI_IOMAP
-	select GENERIC_PTDUMP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
 	select GENERIC_GETTIMEOFDAY
-	select GENERIC_VDSO_TIME_NS
 	select HARDIRQS_SW_RESEND
+	select HAS_IOPORT
 	select HAVE_MOVE_PMD
 	select HAVE_MOVE_PUD
 	select HAVE_PCI
 	select HAVE_ACPI_APEI if (ACPI && EFI)
-	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
+	select HAVE_ALIGNED_STRUCT_PAGE
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_BITREVERSE
 	select HAVE_ARCH_COMPILER_H
+	select HAVE_ARCH_HUGE_VMALLOC
 	select HAVE_ARCH_HUGE_VMAP
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_JUMP_LABEL_RELATIVE
-	select HAVE_ARCH_KASAN if !(ARM64_16K_PAGES && ARM64_VA_BITS_48)
-	select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
-	select HAVE_ARCH_KASAN_SW_TAGS if HAVE_ARCH_KASAN
-	select HAVE_ARCH_KASAN_HW_TAGS if (HAVE_ARCH_KASAN && ARM64_MTE)
+	select HAVE_ARCH_KASAN
+	select HAVE_ARCH_KASAN_VMALLOC
+	select HAVE_ARCH_KASAN_SW_TAGS
+	select HAVE_ARCH_KASAN_HW_TAGS if ARM64_MTE
 	# Some instrumentation may be unsound, hence EXPERT
 	select HAVE_ARCH_KCSAN if EXPERT
 	select HAVE_ARCH_KFENCE
 	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_KSTACK_ERASE
 	select HAVE_ARCH_MMAP_RND_BITS
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
 	select HAVE_ARCH_PREL32_RELOCATIONS
 	select HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
 	select HAVE_ARCH_SECCOMP_FILTER
-	select HAVE_ARCH_STACKLEAK
 	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
@@ -180,39 +208,59 @@ config ARM64
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DYNAMIC_FTRACE
+	select HAVE_DYNAMIC_FTRACE_WITH_ARGS \
+		if (GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS || \
+		    CLANG_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS)
+	select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS \
+		if DYNAMIC_FTRACE_WITH_ARGS && DYNAMIC_FTRACE_WITH_CALL_OPS
+	select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS \
+		if (DYNAMIC_FTRACE_WITH_ARGS && !CFI && \
+		    (CC_IS_CLANG || !CC_OPTIMIZE_FOR_SIZE))
 	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY \
-		if DYNAMIC_FTRACE_WITH_REGS
+		if DYNAMIC_FTRACE_WITH_ARGS
+	select HAVE_SAMPLE_FTRACE_DIRECT
+	select HAVE_SAMPLE_FTRACE_DIRECT_MULTI
+	select HAVE_BUILDTIME_MCOUNT_SORT
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
-	select HAVE_FAST_GUP
-	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_GUP_FAST
+	select HAVE_FTRACE_GRAPH_FUNC
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_ERROR_INJECTION
+	select HAVE_FUNCTION_GRAPH_FREGS
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_GCC_PLUGINS
+	select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && \
+		HW_PERF_EVENTS && HAVE_PERF_EVENTS_NMI
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS
 	select HAVE_IOREMAP_PROT
 	select HAVE_IRQ_TIME_ACCOUNTING
-	select HAVE_KVM
+	select HAVE_LIVEPATCH
+	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
-	select HAVE_PATA_PLATFORM
 	select HAVE_PERF_EVENTS
+	select HAVE_PERF_EVENTS_NMI if ARM64_PSEUDO_NMI
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
 	select HAVE_PREEMPT_DYNAMIC_KEY
 	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_RELIABLE_STACKTRACE
 	select HAVE_POSIX_CPU_TIMERS_TASK_WORK
 	select HAVE_FUNCTION_ARG_ACCESS_API
 	select MMU_GATHER_RCU_TABLE_FREE
 	select HAVE_RSEQ
+	select HAVE_RUST if RUSTC_SUPPORTS_ARM64
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_GENERIC_VDSO
-	select IOMMU_DMA if IOMMU_SUPPORT
+	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
+	select HOTPLUG_SMT if HOTPLUG_CPU
 	select IRQ_DOMAIN
 	select IRQ_FORCED_THREADING
+	select JUMP_LABEL
 	select KASAN_VMALLOC if KASAN
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
 	select NEED_DMA_MAP_STATE
 	select NEED_SG_DMA_LENGTH
@@ -228,21 +276,36 @@ config ARM64
 	select SYSCTL_EXCEPTION_TRACE
 	select THREAD_INFO_IN_TASK
 	select HAVE_ARCH_USERFAULTFD_MINOR if USERFAULTFD
+	select HAVE_ARCH_USERFAULTFD_WP if USERFAULTFD
 	select TRACE_IRQFLAGS_SUPPORT
 	select TRACE_IRQFLAGS_NMI_SUPPORT
+	select HAVE_SOFTIRQ_ON_OWN_STACK
+	select USER_STACKTRACE_SUPPORT
+	select VDSO_GETRANDOM
+	select VMAP_STACK
 	help
 	  ARM 64-bit (AArch64) Linux support.
 
-config CLANG_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS
+config RUSTC_SUPPORTS_ARM64
+	def_bool y
+	depends on CPU_LITTLE_ENDIAN
+	# Shadow call stack is only supported on certain rustc versions.
+	#
+	# When using the UNWIND_PATCH_PAC_INTO_SCS option, rustc version 1.80+ is
+	# required due to use of the -Zfixed-x18 flag.
+	#
+	# Otherwise, rustc version 1.82+ is required due to use of the
+	# -Zsanitizer=shadow-call-stack flag.
+	depends on !SHADOW_CALL_STACK || RUSTC_VERSION >= 108200 || RUSTC_VERSION >= 108000 && UNWIND_PATCH_PAC_INTO_SCS
+
+config CLANG_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS
 	def_bool CC_IS_CLANG
 	# https://github.com/ClangBuiltLinux/linux/issues/1507
 	depends on AS_IS_GNU || (AS_IS_LLVM && (LD_IS_LLD || LD_VERSION >= 23600))
-	select HAVE_DYNAMIC_FTRACE_WITH_REGS
 
-config GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS
+config GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS
 	def_bool CC_IS_GCC
 	depends on $(cc-option,-fpatchable-function-entry=2)
-	select HAVE_DYNAMIC_FTRACE_WITH_REGS
 
 config 64BIT
 	def_bool y
@@ -250,39 +313,33 @@ config 64BIT
 config MMU
 	def_bool y
 
-config ARM64_PAGE_SHIFT
-	int
-	default 16 if ARM64_64K_PAGES
-	default 14 if ARM64_16K_PAGES
-	default 12
-
 config ARM64_CONT_PTE_SHIFT
 	int
-	default 5 if ARM64_64K_PAGES
-	default 7 if ARM64_16K_PAGES
+	default 5 if PAGE_SIZE_64KB
+	default 7 if PAGE_SIZE_16KB
 	default 4
 
 config ARM64_CONT_PMD_SHIFT
 	int
-	default 5 if ARM64_64K_PAGES
-	default 5 if ARM64_16K_PAGES
+	default 5 if PAGE_SIZE_64KB
+	default 5 if PAGE_SIZE_16KB
 	default 4
 
 config ARCH_MMAP_RND_BITS_MIN
-	default 14 if ARM64_64K_PAGES
-	default 16 if ARM64_16K_PAGES
+	default 14 if PAGE_SIZE_64KB
+	default 16 if PAGE_SIZE_16KB
 	default 18
 
 # max bits determined by the following formula:
-#  VA_BITS - PAGE_SHIFT - 3
+#  VA_BITS - PTDESC_TABLE_SHIFT
 config ARCH_MMAP_RND_BITS_MAX
 	default 19 if ARM64_VA_BITS=36
 	default 24 if ARM64_VA_BITS=39
 	default 27 if ARM64_VA_BITS=42
 	default 30 if ARM64_VA_BITS=47
-	default 29 if ARM64_VA_BITS=48 && ARM64_64K_PAGES
-	default 31 if ARM64_VA_BITS=48 && ARM64_16K_PAGES
-	default 33 if ARM64_VA_BITS=48
+	default 29 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52) && ARM64_64K_PAGES
+	default 31 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52) && ARM64_16K_PAGES
+	default 33 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52)
 	default 14 if ARM64_64K_PAGES
 	default 16 if ARM64_16K_PAGES
 	default 18
@@ -325,9 +382,6 @@ config GENERIC_CSUM
 config GENERIC_CALIBRATE_DELAY
 	def_bool y
 
-config ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
-	def_bool y
-
 config SMP
 	def_bool y
 
@@ -344,7 +398,9 @@ config PGTABLE_LEVELS
 	default 3 if ARM64_64K_PAGES && (ARM64_VA_BITS_48 || ARM64_VA_BITS_52)
 	default 3 if ARM64_4K_PAGES && ARM64_VA_BITS_39
 	default 3 if ARM64_16K_PAGES && ARM64_VA_BITS_47
+	default 4 if ARM64_16K_PAGES && (ARM64_VA_BITS_48 || ARM64_VA_BITS_52)
 	default 4 if !ARM64_64K_PAGES && ARM64_VA_BITS_48
+	default 5 if ARM64_4K_PAGES && ARM64_VA_BITS_52
 
 config ARCH_SUPPORTS_UPROBES
 	def_bool y
@@ -355,27 +411,80 @@ config ARCH_PROC_KCORE_TEXT
 config BROKEN_GAS_INST
 	def_bool !$(as-instr,1:\n.inst 0\n.rept . - 1b\n\nnop\n.endr\n)
 
+config BUILTIN_RETURN_ADDRESS_STRIPS_PAC
+	bool
+	# Clang's __builtin_return_address() strips the PAC since 12.0.0
+	# https://github.com/llvm/llvm-project/commit/2a96f47c5ffca84cd774ad402cacd137f4bf45e2
+	default y if CC_IS_CLANG
+	# GCC's __builtin_return_address() strips the PAC since 11.1.0,
+	# and this was backported to 10.2.0, 9.4.0, 8.5.0, but not earlier
+	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94891
+	default y if CC_IS_GCC && (GCC_VERSION >= 110100)
+	default y if CC_IS_GCC && (GCC_VERSION >= 100200) && (GCC_VERSION < 110000)
+	default y if CC_IS_GCC && (GCC_VERSION >=  90400) && (GCC_VERSION < 100000)
+	default y if CC_IS_GCC && (GCC_VERSION >=  80500) && (GCC_VERSION <  90000)
+	default n
+
 config KASAN_SHADOW_OFFSET
 	hex
 	depends on KASAN_GENERIC || KASAN_SW_TAGS
-	default 0xdfff800000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && !KASAN_SW_TAGS
-	default 0xdfffc00000000000 if ARM64_VA_BITS_47 && !KASAN_SW_TAGS
+	default 0xdfff800000000000 if (ARM64_VA_BITS_48 || (ARM64_VA_BITS_52 && !ARM64_16K_PAGES)) && !KASAN_SW_TAGS
+	default 0xdfffc00000000000 if (ARM64_VA_BITS_47 || ARM64_VA_BITS_52) && ARM64_16K_PAGES && !KASAN_SW_TAGS
 	default 0xdffffe0000000000 if ARM64_VA_BITS_42 && !KASAN_SW_TAGS
 	default 0xdfffffc000000000 if ARM64_VA_BITS_39 && !KASAN_SW_TAGS
 	default 0xdffffff800000000 if ARM64_VA_BITS_36 && !KASAN_SW_TAGS
-	default 0xefff800000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && KASAN_SW_TAGS
-	default 0xefffc00000000000 if ARM64_VA_BITS_47 && KASAN_SW_TAGS
+	default 0xefff800000000000 if (ARM64_VA_BITS_48 || (ARM64_VA_BITS_52 && !ARM64_16K_PAGES)) && KASAN_SW_TAGS
+	default 0xefffc00000000000 if (ARM64_VA_BITS_47 || ARM64_VA_BITS_52) && ARM64_16K_PAGES && KASAN_SW_TAGS
 	default 0xeffffe0000000000 if ARM64_VA_BITS_42 && KASAN_SW_TAGS
 	default 0xefffffc000000000 if ARM64_VA_BITS_39 && KASAN_SW_TAGS
 	default 0xeffffff800000000 if ARM64_VA_BITS_36 && KASAN_SW_TAGS
 	default 0xffffffffffffffff
 
+config UNWIND_TABLES
+	bool
+
 source "arch/arm64/Kconfig.platforms"
 
 menu "Kernel Features"
 
 menu "ARM errata workarounds via the alternatives framework"
 
+config AMPERE_ERRATUM_AC03_CPU_38
+        bool "AmpereOne: AC03_CPU_38: Certain bits in the Virtualization Translation Control Register and Translation Control Registers do not follow RES0 semantics"
+	default y
+	help
+	  This option adds an alternative code sequence to work around Ampere
+	  errata AC03_CPU_38 and AC04_CPU_10 on AmpereOne.
+
+	  The affected design reports FEAT_HAFDBS as not implemented in
+	  ID_AA64MMFR1_EL1.HAFDBS, but (V)TCR_ELx.{HA,HD} are not RES0
+	  as required by the architecture. The unadvertised HAFDBS
+	  implementation suffers from an additional erratum where hardware
+	  A/D updates can occur after a PTE has been marked invalid.
+
+	  The workaround forces KVM to explicitly set VTCR_EL2.HA to 0,
+	  which avoids enabling unadvertised hardware Access Flag management
+	  at stage-2.
+
+	  If unsure, say Y.
+
+config AMPERE_ERRATUM_AC04_CPU_23
+        bool "AmpereOne: AC04_CPU_23:  Failure to synchronize writes to HCR_EL2 may corrupt address translations."
+	default y
+	help
+	  This option adds an alternative code sequence to work around Ampere
+	  errata AC04_CPU_23 on AmpereOne.
+
+	  Updates to HCR_EL2 can rarely corrupt simultaneous translations for
+	  data addresses initiated by load/store instructions. Only
+	  instruction initiated translations are vulnerable, not translations
+	  from prefetches for example. A DSB before the store to HCR_EL2 is
+	  sufficient to prevent older instructions from hitting the window
+	  for corruption, and an ISB after is sufficient to prevent younger
+	  instructions from hitting the window for corruption.
+
+	  If unsure, say Y.
+
 config ARM64_WORKAROUND_CLEAN_CACHE
 	bool
 
@@ -487,9 +596,8 @@ config ARM64_ERRATUM_832075
 	  If unsure, say Y.
 
 config ARM64_ERRATUM_834220
-	bool "Cortex-A57: 834220: Stage 2 translation fault might be incorrectly reported in presence of a Stage 1 fault"
+	bool "Cortex-A57: 834220: Stage 2 translation fault might be incorrectly reported in presence of a Stage 1 fault (rare)"
 	depends on KVM
-	default y
 	help
 	  This option adds an alternative code sequence to work around ARM
 	  erratum 834220 on Cortex-A57 parts up to r1p2.
@@ -505,7 +613,7 @@ config ARM64_ERRATUM_834220
 	  as it depends on the alternative framework, which will only patch
 	  the kernel if an affected CPU is detected.
 
-	  If unsure, say Y.
+	  If unsure, say N.
 
 config ARM64_ERRATUM_1742098
 	bool "Cortex-A57/A72: 1742098: ELR recorded incorrectly on interrupt taken between cryptographic instructions in a sequence"
@@ -547,7 +655,6 @@ config ARM64_ERRATUM_845719
 config ARM64_ERRATUM_843419
 	bool "Cortex-A53: 843419: A load or store might access an incorrect address"
 	default y
-	select ARM64_MODULE_PLTS if MODULES
 	help
 	  This option links the kernel with '--fix-cortex-a53-843419' and
 	  enables PLT support to replace certain ADRP instructions, which can
@@ -556,9 +663,6 @@ config ARM64_ERRATUM_843419
 
 	  If unsure, say Y.
 
-config ARM64_LD_HAS_FIX_ERRATUM_843419
-	def_bool $(ld-option,--fix-cortex-a53-843419)
-
 config ARM64_ERRATUM_1024718
 	bool "Cortex-A55: 1024718: Update of DBM/AP bits without break before make might result in incorrect update"
 	default y
@@ -632,9 +736,24 @@ config ARM64_ERRATUM_1530923
 config ARM64_WORKAROUND_REPEAT_TLBI
 	bool
 
+config ARM64_ERRATUM_2441007
+	bool "Cortex-A55: Completion of affected memory accesses might not be guaranteed by completion of a TLBI (rare)"
+	select ARM64_WORKAROUND_REPEAT_TLBI
+	help
+	  This option adds a workaround for ARM Cortex-A55 erratum #2441007.
+
+	  Under very rare circumstances, affected Cortex-A55 CPUs
+	  may not handle a race between a break-before-make sequence on one
+	  CPU, and another CPU accessing the same page. This could allow a
+	  store to a page that has been unmapped.
+
+	  Work around this by adding the affected CPUs to the list that needs
+	  TLB sequences to be done twice.
+
+	  If unsure, say N.
+
 config ARM64_ERRATUM_1286807
-	bool "Cortex-A76: Modification of the translation table for a virtual address might lead to read-after-read ordering violation"
-	default y
+	bool "Cortex-A76: Modification of the translation table for a virtual address might lead to read-after-read ordering violation (rare)"
 	select ARM64_WORKAROUND_REPEAT_TLBI
 	help
 	  This option adds a workaround for ARM Cortex-A76 erratum 1286807.
@@ -648,6 +767,8 @@ config ARM64_ERRATUM_1286807
 	  invalidated has been observed by other observers. The
 	  workaround repeats the TLBI+DSB operation.
 
+	  If unsure, say N.
+
 config ARM64_ERRATUM_1463225
 	bool "Cortex-A76: Software Step might prevent interrupt recognition"
 	default y
@@ -667,8 +788,7 @@ config ARM64_ERRATUM_1463225
 	  If unsure, say Y.
 
 config ARM64_ERRATUM_1542419
-	bool "Neoverse-N1: workaround mis-ordering of instruction fetches"
-	default y
+	bool "Neoverse-N1: workaround mis-ordering of instruction fetches (rare)"
 	help
 	  This option adds a workaround for ARM Neoverse-N1 erratum
 	  1542419.
@@ -680,7 +800,7 @@ config ARM64_ERRATUM_1542419
 	  Workaround the issue by hiding the DIC feature from EL0. This
 	  forces user-space to perform cache maintenance.
 
-	  If unsure, say Y.
+	  If unsure, say N.
 
 config ARM64_ERRATUM_1508412
 	bool "Cortex-A77: 1508412: workaround deadlock on sequence of NC/Device load and store exclusive or PAR read"
@@ -733,6 +853,19 @@ config ARM64_ERRATUM_2077057
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_2658417
+	bool "Cortex-A510: 2658417: remove BF16 support due to incorrect result"
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 2658417.
+	  Affected Cortex-A510 (r0p0 to r1p1) may produce the wrong result for
+	  BFMMLA or VMMLA instructions in rare circumstances when a pair of
+	  A510 CPUs are using shared neon hardware. As the sharing is not
+	  discoverable by the kernel, hide the BF16 HWCAP to indicate that
+	  user-space should not be using these instructions.
+
+	  If unsure, say Y.
+
 config ARM64_ERRATUM_2119858
 	bool "Cortex-A710/X2: 2119858: workaround TRBE overwriting trace data in FILL mode"
 	default y
@@ -842,8 +975,7 @@ config ARM64_ERRATUM_2224489
 	  If unsure, say Y.
 
 config ARM64_ERRATUM_2441009
-	bool "Cortex-A510: Completion of affected memory accesses might not be guaranteed by completion of a TLBI"
-	default y
+	bool "Cortex-A510: Completion of affected memory accesses might not be guaranteed by completion of a TLBI (rare)"
 	select ARM64_WORKAROUND_REPEAT_TLBI
 	help
 	  This option adds a workaround for ARM Cortex-A510 erratum #2441009.
@@ -856,7 +988,7 @@ config ARM64_ERRATUM_2441009
 	  Work around this by adding the affected CPUs to the list that needs
 	  TLB sequences to be done twice.
 
-	  If unsure, say Y.
+	  If unsure, say N.
 
 config ARM64_ERRATUM_2064142
 	bool "Cortex-A510: 2064142: workaround TRBE register writes while disabled"
@@ -917,6 +1049,111 @@ config ARM64_ERRATUM_1902691
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_2457168
+	bool "Cortex-A510: 2457168: workaround for AMEVCNTR01 incrementing incorrectly"
+	depends on ARM64_AMU_EXTN
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 2457168.
+
+	  The AMU counter AMEVCNTR01 (constant counter) should increment at the same rate
+	  as the system counter. On affected Cortex-A510 cores AMEVCNTR01 increments
+	  incorrectly giving a significantly higher output value.
+
+	  Work around this problem by returning 0 when reading the affected counter in
+	  key locations that results in disabling all users of this counter. This effect
+	  is the same to firmware disabling affected counters.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_2645198
+	bool "Cortex-A715: 2645198: Workaround possible [ESR|FAR]_ELx corruption"
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A715 erratum 2645198.
+
+	  If a Cortex-A715 cpu sees a page mapping permissions change from executable
+	  to non-executable, it may corrupt the ESR_ELx and FAR_ELx registers on the
+	  next instruction abort caused by permission fault.
+
+	  Only user-space does executable to non-executable permission transition via
+	  mprotect() system call. Workaround the problem by doing a break-before-make
+	  TLB invalidation, for all changes to executable user space mappings.
+
+	  If unsure, say Y.
+
+config ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	bool
+
+config ARM64_ERRATUM_2966298
+	bool "Cortex-A520: 2966298: workaround for speculatively executed unprivileged load"
+	select ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A520 erratum 2966298.
+
+	  On an affected Cortex-A520 core, a speculatively executed unprivileged
+	  load might leak data from a privileged level via a cache side channel.
+
+	  Work around this problem by executing a TLBI before returning to EL0.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_3117295
+	bool "Cortex-A510: 3117295: workaround for speculatively executed unprivileged load"
+	select ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 3117295.
+
+	  On an affected Cortex-A510 core, a speculatively executed unprivileged
+	  load might leak data from a privileged level via a cache side channel.
+
+	  Work around this problem by executing a TLBI before returning to EL0.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_3194386
+	bool "Cortex-*/Neoverse-*: workaround for MSR SSBS not self-synchronizing"
+	default y
+	help
+	  This option adds the workaround for the following errata:
+
+	  * ARM Cortex-A76 erratum 3324349
+	  * ARM Cortex-A77 erratum 3324348
+	  * ARM Cortex-A78 erratum 3324344
+	  * ARM Cortex-A78C erratum 3324346
+	  * ARM Cortex-A78C erratum 3324347
+	  * ARM Cortex-A710 erratam 3324338
+	  * ARM Cortex-A715 errartum 3456084
+	  * ARM Cortex-A720 erratum 3456091
+	  * ARM Cortex-A725 erratum 3456106
+	  * ARM Cortex-X1 erratum 3324344
+	  * ARM Cortex-X1C erratum 3324346
+	  * ARM Cortex-X2 erratum 3324338
+	  * ARM Cortex-X3 erratum 3324335
+	  * ARM Cortex-X4 erratum 3194386
+	  * ARM Cortex-X925 erratum 3324334
+	  * ARM Neoverse-N1 erratum 3324349
+	  * ARM Neoverse N2 erratum 3324339
+	  * ARM Neoverse-N3 erratum 3456111
+	  * ARM Neoverse-V1 erratum 3324341
+	  * ARM Neoverse V2 erratum 3324336
+	  * ARM Neoverse-V3 erratum 3312417
+	  * ARM Neoverse-V3AE erratum 3312417
+
+	  On affected cores "MSR SSBS, #0" instructions may not affect
+	  subsequent speculative instructions, which may permit unexepected
+	  speculative store bypassing.
+
+	  Work around this problem by placing a Speculation Barrier (SB) or
+	  Instruction Synchronization Barrier (ISB) after kernel changes to
+	  SSBS. The presence of the SSBS special-purpose register is hidden
+	  from hwcaps and EL0 reads of ID_AA64PFR1_EL1, such that userspace
+	  will use the PR_SPEC_STORE_BYPASS prctl to change SSBS.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
@@ -1025,6 +1262,17 @@ config HISILICON_ERRATUM_161600802
 
 	  If unsure, say Y.
 
+config HISILICON_ERRATUM_162100801
+	bool "Hip09 162100801 erratum support"
+	default y
+	help
+	  When enabling GICv4.1 in hip09, VMAPP will fail to clear some caches
+	  during unmapping operation, which will cause some vSGIs lost.
+	  To fix the issue, invalidate related vPE cache through GICR_INVALLR
+	  after VMOVP.
+
+	  If unsure, say Y.
+
 config QCOM_FALKOR_ERRATUM_1003
 	bool "Falkor E1003: Incorrect translation due to ASID change"
 	default y
@@ -1077,6 +1325,25 @@ config NVIDIA_CARMEL_CNP_ERRATUM
 
 	  If unsure, say Y.
 
+config ROCKCHIP_ERRATUM_3568002
+	bool "Rockchip 3568002: GIC600 can not access physical addresses higher than 4GB"
+	default y
+	help
+	  The Rockchip RK3566 and RK3568 GIC600 SoC integrations have AXI
+	  addressing limited to the first 32bit of physical address space.
+
+	  If unsure, say Y.
+
+config ROCKCHIP_ERRATUM_3588001
+	bool "Rockchip 3588001: GIC600 can not support shareability attributes"
+	default y
+	help
+	  The Rockchip RK3588 GIC600 SoC integration does not support ACE/ACE-lite.
+	  This means, that its sharability feature may not be used, even though it
+	  is supported by the IP itself.
+
+	  If unsure, say Y.
+
 config SOCIONEXT_SYNQUACER_PREITS
 	bool "Socionext Synquacer: Workaround for GICv3 pre-ITS"
 	default y
@@ -1096,11 +1363,13 @@ choice
 
 config ARM64_4K_PAGES
 	bool "4KB"
+	select HAVE_PAGE_SIZE_4KB
 	help
 	  This feature enables 4KB pages support.
 
 config ARM64_16K_PAGES
 	bool "16KB"
+	select HAVE_PAGE_SIZE_16KB
 	help
 	  The system will use 16KB pages support. AArch32 emulation
 	  requires applications compiled with 16K (or a multiple of 16K)
@@ -1108,6 +1377,7 @@ config ARM64_16K_PAGES
 
 config ARM64_64K_PAGES
 	bool "64KB"
+	select HAVE_PAGE_SIZE_64KB
 	help
 	  This feature enables 64KB pages support (4KB by default)
 	  allowing only two levels of page tables and faster TLB
@@ -1118,9 +1388,7 @@ endchoice
 
 choice
 	prompt "Virtual address space size"
-	default ARM64_VA_BITS_39 if ARM64_4K_PAGES
-	default ARM64_VA_BITS_47 if ARM64_16K_PAGES
-	default ARM64_VA_BITS_42 if ARM64_64K_PAGES
+	default ARM64_VA_BITS_52
 	help
 	  Allows choosing one of multiple possible virtual address
 	  space sizes. The level of translation table is determined by
@@ -1128,26 +1396,25 @@ choice
 
 config ARM64_VA_BITS_36
 	bool "36-bit" if EXPERT
-	depends on ARM64_16K_PAGES
+	depends on PAGE_SIZE_16KB
 
 config ARM64_VA_BITS_39
 	bool "39-bit"
-	depends on ARM64_4K_PAGES
+	depends on PAGE_SIZE_4KB
 
 config ARM64_VA_BITS_42
 	bool "42-bit"
-	depends on ARM64_64K_PAGES
+	depends on PAGE_SIZE_64KB
 
 config ARM64_VA_BITS_47
 	bool "47-bit"
-	depends on ARM64_16K_PAGES
+	depends on PAGE_SIZE_16KB
 
 config ARM64_VA_BITS_48
 	bool "48-bit"
 
 config ARM64_VA_BITS_52
 	bool "52-bit"
-	depends on ARM64_64K_PAGES && (ARM64_PAN || !ARM64_SW_TTBR0_PAN)
 	help
 	  Enable 52-bit virtual addressing for userspace when explicitly
 	  requested via a hint to mmap(). The kernel will also use 52-bit
@@ -1194,11 +1461,11 @@ choice
 
 config ARM64_PA_BITS_48
 	bool "48-bit"
+	depends on ARM64_64K_PAGES || !ARM64_VA_BITS_52
 
 config ARM64_PA_BITS_52
-	bool "52-bit (ARMv8.2)"
-	depends on ARM64_64K_PAGES
-	depends on ARM64_PAN || !ARM64_SW_TTBR0_PAN
+	bool "52-bit"
+	depends on ARM64_64K_PAGES || ARM64_VA_BITS_52
 	help
 	  Enable support for a 52-bit physical address space, introduced as
 	  part of the ARMv8.2-LPA extension.
@@ -1214,6 +1481,10 @@ config ARM64_PA_BITS
 	default 48 if ARM64_PA_BITS_48
 	default 52 if ARM64_PA_BITS_52
 
+config ARM64_LPA2
+	def_bool y
+	depends on ARM64_PA_BITS_52 && !ARM64_64K_PAGES
+
 choice
 	prompt "Endianness"
 	default CPU_LITTLE_ENDIAN
@@ -1224,7 +1495,7 @@ choice
 
 config CPU_BIG_ENDIAN
 	bool "Build big-endian kernel"
-	depends on !LD_IS_LLD || LLD_VERSION >= 130000
+	depends on BROKEN
 	help
 	  Say Y if you plan on running a kernel with a big-endian userspace.
 
@@ -1236,33 +1507,10 @@ config CPU_LITTLE_ENDIAN
 
 endchoice
 
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-config SCHED_CLUSTER
-	bool "Cluster scheduler support"
-	help
-	  Cluster scheduler support improves the CPU scheduler's decision
-	  making when dealing with machines that have clusters of CPUs.
-	  Cluster usually means a couple of CPUs which are placed closely
-	  by sharing mid-level caches, last-level cache tags or internal
-	  busses.
-
-config SCHED_SMT
-	bool "SMT scheduler support"
-	help
-	  Improves the CPU scheduler's decision making when dealing with
-	  MultiThreading at a cost of slightly increased overhead in some
-	  places. If unsure say N here.
-
 config NR_CPUS
 	int "Maximum number of CPUs (2-4096)"
 	range 2 4096
-	default "256"
+	default "512"
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
@@ -1275,7 +1523,6 @@ config HOTPLUG_CPU
 config NUMA
 	bool "NUMA Memory Allocation and Scheduler Support"
 	select GENERIC_ARCH_NUMA
-	select ACPI_NUMA if ACPI
 	select OF_NUMA
 	select HAVE_SETUP_PER_CPU_AREA
 	select NEED_PER_CPU_EMBED_FIRST_CHUNK
@@ -1302,7 +1549,6 @@ source "kernel/Kconfig.hz"
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
 	select SPARSEMEM_VMEMMAP_ENABLE
-	select SPARSEMEM_VMEMMAP
 
 config HW_PERF_EVENTS
 	def_bool y
@@ -1330,60 +1576,37 @@ config PARAVIRT_TIME_ACCOUNTING
 
 	  If in doubt, say N here.
 
-config KEXEC
-	depends on PM_SLEEP_SMP
-	select KEXEC_CORE
-	bool "kexec system call"
-	help
-	  kexec is a system call that implements the ability to shutdown your
-	  current kernel, and to start another kernel.  It is like a reboot
-	  but it is independent of the system firmware.   And like a reboot
-	  you can start any kernel with it, not just Linux.
+config ARCH_SUPPORTS_KEXEC
+	def_bool PM_SLEEP_SMP
 
-config KEXEC_FILE
-	bool "kexec file based system call"
-	select KEXEC_CORE
-	select HAVE_IMA_KEXEC if IMA
-	help
-	  This is new version of kexec system call. This system call is
-	  file based and takes file descriptors as system call argument
-	  for kernel and initramfs as opposed to list of segments as
-	  accepted by previous system call.
+config ARCH_SUPPORTS_KEXEC_FILE
+	def_bool y
 
-config KEXEC_SIG
-	bool "Verify kernel signature during kexec_file_load() syscall"
+config ARCH_SELECTS_KEXEC_FILE
+	def_bool y
 	depends on KEXEC_FILE
-	help
-	  Select this option to verify a signature with loaded kernel
-	  image. If configured, any attempt of loading a image without
-	  valid signature will fail.
+	select HAVE_IMA_KEXEC if IMA
 
-	  In addition to that option, you need to enable signature
-	  verification for the corresponding kernel image type being
-	  loaded in order for this to work.
+config ARCH_SUPPORTS_KEXEC_SIG
+	def_bool y
 
-config KEXEC_IMAGE_VERIFY_SIG
-	bool "Enable Image signature verification support"
-	default y
-	depends on KEXEC_SIG
-	depends on EFI && SIGNED_PE_FILE_VERIFICATION
-	help
-	  Enable Image signature verification support.
+config ARCH_SUPPORTS_KEXEC_IMAGE_VERIFY_SIG
+	def_bool y
 
-comment "Support for PE file signature verification disabled"
-	depends on KEXEC_SIG
-	depends on !EFI || !SIGNED_PE_FILE_VERIFICATION
+config ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG
+	def_bool y
 
-config CRASH_DUMP
-	bool "Build kdump crash kernel"
-	help
-	  Generate crash dump after being started by kexec. This should
-	  be normally only set in special crash dump kernels which are
-	  loaded in the main kernel with kexec-tools into a specially
-	  reserved region and then later executed after a crash by
-	  kdump/kexec.
+config ARCH_SUPPORTS_KEXEC_HANDOVER
+	def_bool y
 
-	  For more details see Documentation/admin-guide/kdump/kdump.rst
+config ARCH_SUPPORTS_CRASH_DUMP
+	def_bool y
+
+config ARCH_DEFAULT_CRASH_DUMP
+	def_bool y
+
+config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION
+	def_bool CRASH_RESERVE
 
 config TRANS_TABLE
 	def_bool y
@@ -1401,31 +1624,39 @@ config XEN
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM64.
 
-config FORCE_MAX_ZONEORDER
+# include/linux/mmzone.h requires the following to be true:
+#
+#   MAX_PAGE_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
+#
+# so the maximum value of MAX_PAGE_ORDER is SECTION_SIZE_BITS - PAGE_SHIFT:
+#
+#     | SECTION_SIZE_BITS |  PAGE_SHIFT  |  max MAX_PAGE_ORDER  |  default MAX_PAGE_ORDER |
+# ----+-------------------+--------------+----------------------+-------------------------+
+# 4K  |       27          |      12      |       15             |         10              |
+# 16K |       27          |      14      |       13             |         11              |
+# 64K |       29          |      16      |       13             |         13              |
+config ARCH_FORCE_MAX_ORDER
 	int
-	default "14" if ARM64_64K_PAGES
-	default "12" if ARM64_16K_PAGES
-	default "11"
+	default "13" if ARM64_64K_PAGES
+	default "11" if ARM64_16K_PAGES
+	default "10"
 	help
-	  The kernel memory allocator divides physically contiguous memory
-	  blocks into "zones", where each zone is a power of two number of
-	  pages.  This option selects the largest power of two that the kernel
-	  keeps in the memory allocator.  If you need to allocate very large
-	  blocks of physically contiguous memory, then you may need to
-	  increase this value.
+	  The kernel page allocator limits the size of maximal physically
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
+	  defines the maximal power of two of number of pages that can be
+	  allocated as a single contiguous block. This option allows
+	  overriding the default setting when ability to allocate very
+	  large blocks of physically contiguous memory is required.
 
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
+	  The maximal size of allocation cannot exceed the size of the
+	  section, so the value of MAX_PAGE_ORDER should satisfy
 
-	  We make sure that we can allocate upto a HugePage size for each configuration.
-	  Hence we have :
-		MAX_ORDER = (PMD_SHIFT - PAGE_SHIFT) + 1 => PAGE_SHIFT - 2
+	    MAX_PAGE_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
 
-	  However for 4K, we choose a higher default value, 11 as opposed to 10, giving us
-	  4M allocations matching the default size used by generic code.
+	  Don't change if unsure.
 
 config UNMAP_KERNEL_AT_EL0
-	bool "Unmap kernel when running in userspace (aka \"KAISER\")" if EXPERT
+	bool "Unmap kernel when running in userspace (KPTI)" if EXPERT
 	default y
 	help
 	  Speculation attacks against some high-performance processors can
@@ -1445,22 +1676,10 @@ config MITIGATE_SPECTRE_BRANCH_HISTORY
 	  When taking an exception from user-space, a sequence of branches
 	  or a firmware call overwrites the branch history.
 
-config RODATA_FULL_DEFAULT_ENABLED
-	bool "Apply r/o permissions of VM areas also to their linear aliases"
-	default y
-	help
-	  Apply read-only attributes of VM areas to the linear alias of
-	  the backing pages as well. This prevents code or read-only data
-	  from being modified (inadvertently or intentionally) via another
-	  mapping of the same memory page. This additional enhancement can
-	  be turned off at runtime by passing rodata=[off|on] (and turned on
-	  with rodata=full if this option is set to 'n')
-
-	  This requires the linear region to be mapped down to pages,
-	  which may adversely affect performance in some cases.
-
 config ARM64_SW_TTBR0_PAN
 	bool "Emulate Privileged Access Never using TTBR0_EL1 switching"
+	depends on !KCSAN
+	select ARM64_PAN
 	help
 	  Enabling this option prevents the kernel from accessing
 	  user-space memory directly by pointing TTBR0_EL1 to a reserved
@@ -1474,7 +1693,7 @@ config ARM64_TAGGED_ADDR_ABI
 	  When this option is enabled, user applications can opt in to a
 	  relaxed ABI via prctl() allowing tagged addresses to be passed
 	  to system calls as pointer arguments. For details, see
-	  Documentation/arm64/tagged-address-abi.rst.
+	  Documentation/arch/arm64/tagged-address-abi.rst.
 
 menuconfig COMPAT
 	bool "Kernel support for 32-bit EL0"
@@ -1508,7 +1727,7 @@ config KUSER_HELPERS
 	  the system. This permits binaries to be run on ARMv4 through
 	  to ARMv8 without modification.
 
-	  See Documentation/arm/kernel_user_helpers.rst for details.
+	  See Documentation/arch/arm/kernel_user_helpers.rst for details.
 
 	  However, the fixed address nature of these helpers can be used
 	  by ROP (return orientated programming) authors when creating
@@ -1527,7 +1746,6 @@ config COMPAT_VDSO
 	bool "Enable vDSO for 32-bit applications"
 	depends on !CPU_BIG_ENDIAN
 	depends on (CC_IS_CLANG && LD_IS_LLD) || "$(CROSS_COMPILE_COMPAT)" != ""
-	select GENERIC_COMPAT_VDSO
 	default y
 	help
 	  Place in the process address space of 32-bit applications an
@@ -1545,6 +1763,9 @@ config THUMB2_COMPAT_VDSO
 	  Compile the compat vDSO with '-mthumb -fomit-frame-pointer' if y,
 	  otherwise with '-marm'.
 
+config COMPAT_ALIGNMENT_FIXUPS
+	bool "Fix up misaligned multi-word loads and stores in user space"
+
 menuconfig ARMV8_DEPRECATED
 	bool "Emulate deprecated/obsolete ARMv8 instructions"
 	depends on SYSCTL
@@ -1651,20 +1872,12 @@ config ARM64_PAN
 	  The feature is detected at runtime, and will remain as a 'nop'
 	  instruction if the cpu does not implement the feature.
 
-config AS_HAS_LDAPR
-	def_bool $(as-instr,.arch_extension rcpc)
-
-config AS_HAS_LSE_ATOMICS
-	def_bool $(as-instr,.arch_extension lse)
-
 config ARM64_LSE_ATOMICS
 	bool
 	default ARM64_USE_LSE_ATOMICS
-	depends on AS_HAS_LSE_ATOMICS
 
 config ARM64_USE_LSE_ATOMICS
 	bool "Atomic instructions"
-	depends on JUMP_LABEL
 	default y
 	help
 	  As part of the Large System Extensions, ARMv8.1 introduces new
@@ -1673,20 +1886,12 @@ config ARM64_USE_LSE_ATOMICS
 
 	  Say Y here to make use of these instructions for the in-kernel
 	  atomic routines. This incurs a small overhead on CPUs that do
-	  not support these instructions and requires the kernel to be
-	  built with binutils >= 2.25 in order for the new instructions
-	  to be used.
+	  not support these instructions.
 
 endmenu # "ARMv8.1 architectural features"
 
 menu "ARMv8.2 architectural features"
 
-config AS_HAS_ARMV8_2
-	def_bool $(cc-option,-Wa$(comma)-march=armv8.2-a)
-
-config AS_HAS_SHA3
-	def_bool $(as-instr,.arch armv8.2-a+sha3)
-
 config ARM64_PMEM
 	bool "Enable support for persistent memory"
 	select ARCH_HAS_PMEM_API
@@ -1718,7 +1923,6 @@ config ARM64_RAS_EXTN
 config ARM64_CNP
 	bool "Enable support for Common Not Private (CNP) translations"
 	default y
-	depends on ARM64_PAN || !ARM64_SW_TTBR0_PAN
 	help
 	  Common Not Private (CNP) allows translation table entries to
 	  be shared between different PEs in the same inner shareable
@@ -1761,12 +1965,11 @@ config ARM64_PTR_AUTH_KERNEL
 	bool "Use pointer authentication for kernel"
 	default y
 	depends on ARM64_PTR_AUTH
-	depends on (CC_HAS_SIGN_RETURN_ADDRESS || CC_HAS_BRANCH_PROT_PAC_RET) && AS_HAS_PAC
 	# Modern compilers insert a .note.gnu.property section note for PAC
 	# which is only understood by binutils starting with version 2.33.1.
 	depends on LD_IS_LLD || LD_VERSION >= 23301 || (CC_IS_GCC && GCC_VERSION < 90100)
 	depends on !CC_IS_CLANG || AS_HAS_CFI_NEGATE_RA_STATE
-	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_REGS)
+	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_ARGS)
 	help
 	  If the compiler supports the -mbranch-protection or
 	  -msign-return-address flag (e.g. GCC 7 or later), then this option
@@ -1776,20 +1979,14 @@ config ARM64_PTR_AUTH_KERNEL
 	  disabled with minimal loss of protection.
 
 	  This feature works with FUNCTION_GRAPH_TRACER option only if
-	  DYNAMIC_FTRACE_WITH_REGS is enabled.
+	  DYNAMIC_FTRACE_WITH_ARGS is enabled.
 
 config CC_HAS_BRANCH_PROT_PAC_RET
 	# GCC 9 or later, clang 8 or later
 	def_bool $(cc-option,-mbranch-protection=pac-ret+leaf)
 
-config CC_HAS_SIGN_RETURN_ADDRESS
-	# GCC 7, 8
-	def_bool $(cc-option,-msign-return-address=all)
-
-config AS_HAS_PAC
-	def_bool $(cc-option,-Wa$(comma)-march=armv8.3-a)
-
 config AS_HAS_CFI_NEGATE_RA_STATE
+	# binutils 2.34+
 	def_bool $(as-instr,.cfi_startproc\n.cfi_negate_ra_state\n.cfi_endproc\n)
 
 endmenu # "ARMv8.3 architectural features"
@@ -1819,20 +2016,13 @@ config ARM64_AMU_EXTN
 	  correctly reflect reality. Most commonly, the value read will be 0,
 	  indicating that the counter is not enabled.
 
-config AS_HAS_ARMV8_4
-	def_bool $(cc-option,-Wa$(comma)-march=armv8.4-a)
-
 config ARM64_TLB_RANGE
 	bool "Enable support for tlbi range feature"
 	default y
-	depends on AS_HAS_ARMV8_4
 	help
 	  ARMv8.4-TLBI provides TLBI invalidation instruction that apply to a
 	  range of input addresses.
 
-	  The feature introduces new assembly instructions, and they were
-	  support when binutils >= 2.30.
-
 endmenu # "ARMv8.4 architectural features"
 
 menu "ARMv8.5 architectural features"
@@ -1870,9 +2060,9 @@ config ARM64_BTI_KERNEL
 	depends on CC_HAS_BRANCH_PROT_PAC_RET_BTI
 	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94697
 	depends on !CC_IS_GCC || GCC_VERSION >= 100100
-	# https://github.com/llvm/llvm-project/commit/a88c722e687e6780dcd6a58718350dc76fcc4cc9
-	depends on !CC_IS_CLANG || CLANG_VERSION >= 120000
-	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_REGS)
+	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106671
+	depends on !CC_IS_GCC
+	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_ARGS)
 	help
 	  Build the kernel with Branch Target Identification annotations
 	  and enable enforcement of this for kernel code. When this option
@@ -1908,11 +2098,12 @@ config ARM64_MTE
 	default y
 	depends on ARM64_AS_HAS_MTE && ARM64_TAGGED_ADDR_ABI
 	depends on AS_HAS_ARMV8_5
-	depends on AS_HAS_LSE_ATOMICS
 	# Required for tag checking in the uaccess routines
-	depends on ARM64_PAN
+	select ARM64_PAN
 	select ARCH_HAS_SUBPAGE_FAULTS
 	select ARCH_USES_HIGH_VMA_FLAGS
+	select ARCH_USES_PG_ARCH_2
+	select ARCH_USES_PG_ARCH_3
 	help
 	  Memory Tagging (part of the ARMv8.5 Extensions) provides
 	  architectural support for run-time, always-on detection of
@@ -1931,7 +2122,7 @@ config ARM64_MTE
 	  explicitly opt in. The mechanism for the userspace is
 	  described in:
 
-	  Documentation/arm64/memory-tagging-extension.rst.
+	  Documentation/arch/arm64/memory-tagging-extension.rst.
 
 endmenu # "ARMv8.5 architectural features"
 
@@ -1949,6 +2140,67 @@ config ARM64_EPAN
 	  if the cpu does not implement the feature.
 endmenu # "ARMv8.7 architectural features"
 
+config AS_HAS_MOPS
+	def_bool $(as-instr,.arch_extension mops)
+
+menu "ARMv8.9 architectural features"
+
+config ARM64_POE
+	prompt "Permission Overlay Extension"
+	def_bool y
+	select ARCH_USES_HIGH_VMA_FLAGS
+	select ARCH_HAS_PKEYS
+	help
+	  The Permission Overlay Extension is used to implement Memory
+	  Protection Keys. Memory Protection Keys provides a mechanism for
+	  enforcing page-based protections, but without requiring modification
+	  of the page tables when an application changes protection domains.
+
+	  For details, see Documentation/core-api/protection-keys.rst
+
+	  If unsure, say y.
+
+config ARCH_PKEY_BITS
+	int
+	default 3
+
+config ARM64_HAFT
+	bool "Support for Hardware managed Access Flag for Table Descriptors"
+	depends on ARM64_HW_AFDBM
+	default y
+	help
+	  The ARMv8.9/ARMv9.5 introduces the feature Hardware managed Access
+	  Flag for Table descriptors. When enabled an architectural executed
+	  memory access will update the Access Flag in each Table descriptor
+	  which is accessed during the translation table walk and for which
+	  the Access Flag is 0. The Access Flag of the Table descriptor use
+	  the same bit of PTE_AF.
+
+	  The feature will only be enabled if all the CPUs in the system
+	  support this feature. If unsure, say Y.
+
+endmenu # "ARMv8.9 architectural features"
+
+menu "ARMv9.4 architectural features"
+
+config ARM64_GCS
+	bool "Enable support for Guarded Control Stack (GCS)"
+	default y
+	select ARCH_HAS_USER_SHADOW_STACK
+	select ARCH_USES_HIGH_VMA_FLAGS
+	help
+	  Guarded Control Stack (GCS) provides support for a separate
+	  stack with restricted access which contains only return
+	  addresses.  This can be used to harden against some attacks
+	  by comparing return address used by the program with what is
+	  stored in the GCS, and may also be used to efficiently obtain
+	  the call stack for applications such as profiling.
+
+	  The feature is detected at runtime, and will remain disabled
+	  if the system does not implement the feature.
+
+endmenu # "ARMv9.4 architectural features"
+
 config ARM64_SVE
 	bool "ARM Scalable Vector Extension support"
 	default y
@@ -1991,26 +2243,6 @@ config ARM64_SME
 	  register state capable of holding two dimensional matrix tiles to
 	  enable various matrix operations.
 
-config ARM64_MODULE_PLTS
-	bool "Use PLTs to allow module memory to spill over into vmalloc area"
-	depends on MODULES
-	select HAVE_MOD_ARCH_SPECIFIC
-	help
-	  Allocate PLTs when loading modules so that jumps and calls whose
-	  targets are too far away for their relative offsets to be encoded
-	  in the instructions themselves can be bounced via veneers in the
-	  module's PLT. This allows modules to be allocated in the generic
-	  vmalloc area after the dedicated module memory area has been
-	  exhausted.
-
-	  When running with address space randomization (KASLR), the module
-	  region itself may be too far away for ordinary relative jumps and
-	  calls, and so in that case, module PLTs are required and cannot be
-	  disabled.
-
-	  Specific errata workaround(s) might also force module PLTs to be
-	  enabled (ARM64_ERRATUM_843419).
-
 config ARM64_PSEUDO_NMI
 	bool "Support for NMI-like interrupts"
 	select ARM_GIC_V3
@@ -2051,7 +2283,6 @@ config RELOCATABLE
 
 config RANDOMIZE_BASE
 	bool "Randomize the address of the kernel image"
-	select ARM64_MODULE_PLTS if MODULES
 	select RELOCATABLE
 	help
 	  Randomizes the virtual address at which the kernel image is
@@ -2082,9 +2313,8 @@ config RANDOMIZE_MODULE_REGION_FULL
 	  When this option is not set, the module region will be randomized over
 	  a limited range that contains the [_stext, _etext] interval of the
 	  core kernel, so branch relocations are almost always in range unless
-	  ARM64_MODULE_PLTS is enabled and the region is exhausted. In this
-	  particular case of region exhaustion, modules might be able to fall
-	  back to a larger 2GB area.
+	  the region is exhausted. In this particular case of region
+	  exhaustion, modules might be able to fall back to a larger 2GB area.
 
 config CC_HAVE_STACKPROTECTOR_SYSREG
 	def_bool $(cc-option,-mstack-protector-guard=sysreg -mstack-protector-guard-reg=sp_el0 -mstack-protector-guard-offset=0)
@@ -2093,17 +2323,22 @@ config STACKPROTECTOR_PER_TASK
 	def_bool y
 	depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_SYSREG
 
-# The GPIO number here must be sorted by descending number. In case of
-# a multiplatform kernel, we just want the highest value required by the
-# selected platforms.
-config ARCH_NR_GPIO
-        int
-        default 2048 if ARCH_APPLE
-        default 0
-        help
-          Maximum number of GPIOs in the system.
+config UNWIND_PATCH_PAC_INTO_SCS
+	bool "Enable shadow call stack dynamically using code patching"
+	depends on CC_IS_CLANG
+	depends on ARM64_PTR_AUTH_KERNEL && CC_HAS_BRANCH_PROT_PAC_RET
+	depends on SHADOW_CALL_STACK
+	select UNWIND_TABLES
+	select DYNAMIC_SCS
 
-          If unsure, leave the default value.
+config ARM64_CONTPTE
+	bool "Contiguous PTE mappings for user memory" if EXPERT
+	depends on TRANSPARENT_HUGEPAGE
+	default y
+	help
+	  When enabled, user mappings are configured using the PTE contiguous
+	  bit, for any mappings that meet the size and alignment requirements.
+	  This reduces TLB pressure and improves performance.
 
 endmenu # "Kernel Features"
 
@@ -2127,7 +2362,8 @@ config CMDLINE
 	  root device (e.g. root=/dev/nfs).
 
 choice
-	prompt "Kernel command line type" if CMDLINE != ""
+	prompt "Kernel command line type"
+	depends on CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
 	help
 	  Choose how the kernel will handle the provided default kernel
@@ -2173,6 +2409,17 @@ config EFI
 	  allow the kernel to be booted as an EFI application. This
 	  is only useful on systems that have UEFI firmware.
 
+config COMPRESSED_INSTALL
+	bool "Install compressed image by default"
+	help
+	  This makes the regular "make install" install the compressed
+	  image we built, not the legacy uncompressed one.
+
+	  You can check that a compressed image works for you by doing
+	  "make zinstall" first, and verifying that everything is fine
+	  in your environment before making "make install" do this for
+	  you.
+
 config DMI
 	bool "Enable support for SMBIOS (DMI) tables"
 	depends on EFI
@@ -2215,6 +2462,4 @@ source "drivers/acpi/Kconfig"
 
 source "arch/arm64/kvm/Kconfig"
 
-if CRYPTO
-source "arch/arm64/crypto/Kconfig"
-endif # CRYPTO
+source "kernel/livepatch/Kconfig"
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 74e9e9de3759..13173795c43d 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -8,6 +8,13 @@ config ARCH_ACTIONS
 	help
 	  This enables support for the Actions Semiconductor S900 SoC family.
 
+config ARCH_AIROHA
+	bool "Airoha SoC Support"
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  This enables support for the ARM64 based Airoha SoCs.
+
 config ARCH_SUNXI
 	bool "Allwinner sunxi 64-bit SoC Family"
 	select ARCH_HAS_RESET_CONTROLLER
@@ -30,8 +37,26 @@ config ARCH_APPLE
 	bool "Apple Silicon SoC family"
 	select APPLE_AIC
 	help
-	  This enables support for Apple's in-house ARM SoC family, starting
-	  with the Apple M1.
+	  This enables support for Apple's in-house ARM SoC family, such
+	  as the Apple M1.
+
+config ARCH_ARTPEC
+	bool "Axis Communications ARTPEC SoC Family"
+	depends on ARCH_EXYNOS
+	select ARM_GIC
+	help
+	   This enables support for the ARMv8 based ARTPEC SoC Family.
+
+config ARCH_AXIADO
+	bool "Axiado SoC Family"
+	select GPIOLIB
+	help
+	  This enables support for Axiado SoC family like AX3000
+
+menuconfig ARCH_BCM
+	bool "Broadcom SoC Support"
+
+if ARCH_BCM
 
 config ARCH_BCM2835
 	bool "Broadcom BCM2835 family"
@@ -47,15 +72,6 @@ config ARCH_BCM2835
 	  This enables support for the Broadcom BCM2837 and BCM2711 SoC.
 	  These SoCs are used in the Raspberry Pi 3 and 4 devices.
 
-config ARCH_BCM4908
-	bool "Broadcom BCM4908 family"
-	select ARCH_BCMBCA
-	select GPIOLIB
-	help
-	  This enables support for the Broadcom BCM4906, BCM4908 and
-	  BCM49408 SoCs. These SoCs use Brahma-B53 cores and can be
-	  found in home routers.
-
 config ARCH_BCM_IPROC
 	bool "Broadcom iProc SoC Family"
 	select COMMON_CLK_IPROC
@@ -66,6 +82,7 @@ config ARCH_BCM_IPROC
 
 config ARCH_BCMBCA
 	bool "Broadcom Broadband Carrier Access (BCA) origin SoC"
+	select GPIOLIB
 	help
 	  Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based
 	  BCA chipset.
@@ -73,6 +90,16 @@ config ARCH_BCMBCA
 	  This enables support for Broadcom BCA ARM-based broadband chipsets,
 	  including the DSL, PON and Wireless family of chips.
 
+config ARCH_BRCMSTB
+	bool "Broadcom Set-Top-Box SoCs"
+	select ARCH_HAS_RESET_CONTROLLER
+	select GENERIC_IRQ_CHIP
+	select PINCTRL
+	help
+	  This enables support for Broadcom's ARMv8 Set Top Box SoCs
+
+endif
+
 config ARCH_BERLIN
 	bool "Marvell Berlin SoC Family"
 	select DW_APB_ICTL
@@ -87,16 +114,19 @@ config ARCH_BITMAIN
 	help
 	  This enables support for the Bitmain SoC Family.
 
-config ARCH_BRCMSTB
-	bool "Broadcom Set-Top-Box SoCs"
-	select ARCH_HAS_RESET_CONTROLLER
-	select GENERIC_IRQ_CHIP
-	select PINCTRL
+config ARCH_BLAIZE
+	bool "Blaize SoC Platforms"
 	help
-	  This enables support for Broadcom's ARMv8 Set Top Box SoCs
+	  This enables support for the Blaize SoC family
+
+config ARCH_CIX
+	bool "Cixtech SoC family"
+	help
+	  This enables support for the Cixtech SoC family,
+	  like P1(sky1).
 
 config ARCH_EXYNOS
-	bool "ARMv8 based Samsung Exynos SoC family"
+	bool "Samsung Exynos SoC family"
 	select COMMON_CLK_SAMSUNG
 	select CLKSRC_EXYNOS_MCT
 	select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
@@ -108,40 +138,14 @@ config ARCH_EXYNOS
 	help
 	  This enables support for ARMv8 based Samsung Exynos SoC family.
 
-config ARCH_SPARX5
-	bool "ARMv8 based Microchip Sparx5 SoC family"
-	select PINCTRL
-	select DW_APB_TIMER_OF
-	help
-	  This enables support for the Microchip Sparx5 ARMv8-based
-	  SoC family of TSN-capable gigabit switches.
-
-	  The SparX-5 Ethernet switch family provides a rich set of
-	  switching features such as advanced TCAM-based VLAN and QoS
-	  processing enabling delivery of differentiated services, and
-	  security through TCAM-based frame processing using versatile
-	  content aware processor (VCAP).
-
 config ARCH_K3
 	bool "Texas Instruments Inc. K3 multicore SoC architecture"
-	select PM_GENERIC_DOMAINS if PM
-	select MAILBOX
 	select SOC_TI
-	select TI_MESSAGE_MANAGER
-	select TI_SCI_PROTOCOL
-	select TI_SCI_INTR_IRQCHIP
-	select TI_SCI_INTA_IRQCHIP
 	select TI_K3_SOCINFO
 	help
 	  This enables support for Texas Instruments' K3 multicore SoC
 	  architecture.
 
-config ARCH_LAYERSCAPE
-	bool "ARMv8 based Freescale Layerscape SoC family"
-	select EDAC_SUPPORT
-	help
-	  This enables support for the Freescale Layerscape SoC family.
-
 config ARCH_LG1K
 	bool "LG Electronics LG1K SoC Family"
 	help
@@ -175,6 +179,51 @@ config ARCH_MESON
 	  This enables support for the arm64 based Amlogic SoCs
 	  such as the s905, S905X/D, S912, A113X/D or S905X/D2
 
+menu "Microchip SoC support"
+
+config ARCH_MICROCHIP
+	bool
+
+config ARCH_LAN969X
+	bool "Microchip LAN969X SoC family"
+	select PINCTRL
+	select DW_APB_TIMER_OF
+	select ARCH_MICROCHIP
+	help
+	  This enables support for the Microchip LAN969X ARMv8-based
+	  SoC family of TSN-capable gigabit switches.
+
+	  The LAN969X Ethernet switch family provides a rich set of
+	  switching features such as advanced TCAM-based VLAN and QoS
+	  processing enabling delivery of differentiated services, and
+	  security through TCAM-based frame processing using versatile
+	  content aware processor (VCAP).
+
+config ARCH_SPARX5
+	bool "Microchip Sparx5 SoC family"
+	select PINCTRL
+	select DW_APB_TIMER_OF
+	select ARCH_MICROCHIP
+	help
+	  This enables support for the Microchip Sparx5 ARMv8-based
+	  SoC family of TSN-capable gigabit switches.
+
+	  The SparX-5 Ethernet switch family provides a rich set of
+	  switching features such as advanced TCAM-based VLAN and QoS
+	  processing enabling delivery of differentiated services, and
+	  security through TCAM-based frame processing using versatile
+	  content aware processor (VCAP).
+
+endmenu
+
+config ARCH_MMP
+	bool "Marvell MMP SoC Family"
+	select PINCTRL
+	select PINCTRL_SINGLE
+	help
+	  This enables support for Marvell MMP SoC family, currently
+	  supporting PXA1908 aka IAP140.
+
 config ARCH_MVEBU
 	bool "Marvell EBU SoC Family"
 	select ARMADA_AP806_SYSCON
@@ -194,14 +243,24 @@ config ARCH_MVEBU
 	select PINCTRL_ARMADA_CP110
 	select PINCTRL_AC5
 	help
-	  This enables support for Marvell EBU familly, including:
+	  This enables support for Marvell EBU family, including:
 	   - Armada 3700 SoC Family
 	   - Armada 7K SoC Family
 	   - Armada 8K SoC Family
 	   - 98DX2530 SoC Family
 
+menuconfig ARCH_NXP
+	bool "NXP SoC support"
+
+if ARCH_NXP
+
+config ARCH_LAYERSCAPE
+	bool "Freescale Layerscape SoC family"
+	help
+	  This enables support for the Freescale Layerscape SoC family.
+
 config ARCH_MXC
-	bool "ARMv8 based NXP i.MX SoC family"
+	bool "NXP i.MX SoC family"
 	select ARM64_ERRATUM_843419
 	select ARM64_ERRATUM_845719 if COMPAT
 	select IMX_GPCV2
@@ -214,6 +273,21 @@ config ARCH_MXC
 	  This enables support for the ARMv8 based SoCs in the
 	  NXP i.MX family.
 
+config ARCH_S32
+	bool "NXP S32 SoC Family"
+	help
+	  This enables support for the NXP S32 family of processors.
+
+endif
+
+config ARCH_MA35
+	bool "Nuvoton MA35 Architecture"
+	select GPIOLIB
+	select PINCTRL
+	select RESET_CONTROLLER
+	help
+	  This enables support for the ARMv8 based Nuvoton MA35 series SoCs.
+
 config ARCH_NPCM
 	bool "Nuvoton NPCM Architecture"
 	select PINCTRL
@@ -225,10 +299,23 @@ config ARCH_NPCM
 	  General support for NPCM8xx BMC (Arbel).
 	  Nuvoton NPCM8xx BMC based on the Cortex A35.
 
+config ARCH_PENSANDO
+	bool "AMD Pensando Platforms"
+	help
+	  This enables support for the ARMv8 based AMD Pensando SoC
+	  family to include the Elba SoC.
+
+	  AMD Pensando SoCs support a range of Distributed Services
+	  Cards in PCIe format installed into servers.  The Elba
+	  SoC includes 16 Cortex A-72 CPU cores, 144 P4-programmable
+	  cores for a minimal latency/jitter datapath, and network
+	  interfaces up to 200 Gb/s.
+
 config ARCH_QCOM
 	bool "Qualcomm Platforms"
 	select GPIOLIB
 	select PINCTRL
+	select HAVE_PWRCTRL if PCI
 	help
 	  This enables support for the ARMv8 based Qualcomm chipsets.
 
@@ -241,9 +328,6 @@ config ARCH_REALTEK
 
 config ARCH_RENESAS
 	bool "Renesas SoC Platforms"
-	select GPIOLIB
-	select PINCTRL
-	select SOC_BUS
 	help
 	  This enables support for the ARMv8 based Renesas SoCs.
 
@@ -257,11 +341,6 @@ config ARCH_ROCKCHIP
 	  This enables support for the ARMv8 based Rockchip chipsets,
 	  like the RK3368.
 
-config ARCH_S32
-	bool "NXP S32 SoC Family"
-	help
-	  This enables support for the NXP S32 family of processors.
-
 config ARCH_SEATTLE
 	bool "AMD Seattle SoC Family"
 	help
@@ -274,6 +353,32 @@ config ARCH_INTEL_SOCFPGA
 	  Stratix 10 (ex. Altera), Stratix10 Software Virtual Platform,
 	  Agilex and eASIC N5X.
 
+config ARCH_SOPHGO
+	bool "Sophgo SoCs"
+	select ARCH_HAS_RESET_CONTROLLER
+	help
+	  This enables support for Sophgo SoC platform hardware.
+
+config ARCH_STM32
+	bool "STMicroelectronics STM32 SoC Family"
+	select GPIOLIB
+	select PINCTRL
+	select ARM_SMC_MBOX
+	select ARM_SCMI_PROTOCOL
+	select REGULATOR
+	select REGULATOR_ARM_SCMI
+	select COMMON_CLK_SCMI
+	select STM32_FIREWALL
+	help
+	  This enables support for ARMv8 based STMicroelectronics
+	  STM32 family, including:
+		- STM32MP21:
+			- STM32MP211, STM32MP213, STM32MP215.
+		- STM32MP23:
+			- STM32MP231, STM32MP233, STM32MP235.
+		- STM32MP25:
+			- STM32MP251, STM32MP253, STM32MP255 and STM32MP257.
+
 config ARCH_SYNQUACER
 	bool "Socionext SynQuacer SoC Family"
 	select IRQ_FASTEOI_HIERARCHY_HANDLERS
@@ -293,7 +398,7 @@ config ARCH_TEGRA
 	  This enables support for the NVIDIA Tegra SoC family.
 
 config ARCH_TESLA_FSD
-	bool "ARMv8 based Tesla platform"
+	bool "Tesla platform"
 	depends on ARCH_EXYNOS
 	help
 	  Support for ARMv8 based Tesla platforms.
@@ -324,13 +429,12 @@ config ARCH_UNIPHIER
 	  This enables support for Socionext UniPhier SoC family.
 
 config ARCH_VEXPRESS
-	bool "ARMv8 software model (Versatile Express)"
+	bool "ARM Ltd Platforms"
 	select GPIOLIB
 	select PM
 	select PM_GENERIC_DOMAINS
 	help
-	  This enables support for the ARMv8 software model (Versatile
-	  Express).
+	  This enables support for the ARM Ltd Platforms.
 
 config ARCH_VISCONTI
 	bool "Toshiba Visconti SoC Family"
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 6d9d4a58b898..73a10f65ce8b 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -10,20 +10,17 @@
 #
 # Copyright (C) 1995-2001 by Russell King
 
-LDFLAGS_vmlinux	:=--no-undefined -X
+LDFLAGS_vmlinux	:=--no-undefined -X --pic-veneer
 
 ifeq ($(CONFIG_RELOCATABLE), y)
 # Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour
 # for relative relocs, since this leads to better Image compression
 # with the relocation offsets always being zero.
-LDFLAGS_vmlinux		+= -shared -Bsymbolic -z notext \
-			$(call ld-option, --no-apply-dynamic-relocs)
+LDFLAGS_vmlinux	+= -shared -Bsymbolic -z notext --no-apply-dynamic-relocs
 endif
 
 ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
-  ifeq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
 LDFLAGS_vmlinux	+= --fix-cortex-a53-843419
-  endif
 endif
 
 cc_has_k_constraint := $(call try-run,echo				\
@@ -36,17 +33,37 @@ ifeq ($(CONFIG_BROKEN_GAS_INST),y)
 $(warning Detected assembler with broken .inst; disassembly will be unreliable)
 endif
 
-KBUILD_CFLAGS	+= -mgeneral-regs-only	\
+# The GCC option -ffreestanding is required in order to compile code containing
+# ARM/NEON intrinsics in a non C99-compliant environment (such as the kernel)
+CC_FLAGS_FPU	:= -ffreestanding
+# Enable <arm_neon.h>
+CC_FLAGS_FPU	+= -isystem $(shell $(CC) -print-file-name=include)
+CC_FLAGS_NO_FPU	:= -mgeneral-regs-only
+
+KBUILD_CFLAGS	+= $(CC_FLAGS_NO_FPU) \
 		   $(compat_vdso) $(cc_has_k_constraint)
 KBUILD_CFLAGS	+= $(call cc-disable-warning, psabi)
 KBUILD_AFLAGS	+= $(compat_vdso)
 
+ifeq ($(call rustc-min-version, 108500),y)
+KBUILD_RUSTFLAGS += --target=aarch64-unknown-none-softfloat
+else
+KBUILD_RUSTFLAGS += --target=aarch64-unknown-none -Ctarget-feature="-neon"
+endif
+
 KBUILD_CFLAGS	+= $(call cc-option,-mabi=lp64)
 KBUILD_AFLAGS	+= $(call cc-option,-mabi=lp64)
 
 # Avoid generating .eh_frame* sections.
+ifneq ($(CONFIG_UNWIND_TABLES),y)
 KBUILD_CFLAGS	+= -fno-asynchronous-unwind-tables -fno-unwind-tables
 KBUILD_AFLAGS	+= -fno-asynchronous-unwind-tables -fno-unwind-tables
+KBUILD_RUSTFLAGS += -Cforce-unwind-tables=n
+else
+KBUILD_CFLAGS	+= -fasynchronous-unwind-tables
+KBUILD_AFLAGS	+= -fasynchronous-unwind-tables
+KBUILD_RUSTFLAGS += -Cforce-unwind-tables=y -Zuse-sync-unwind=n
+endif
 
 ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
 prepare: stack_protector_prepare
@@ -55,47 +72,38 @@ stack_protector_prepare: prepare0
 				-mstack-protector-guard-reg=sp_el0	  \
 				-mstack-protector-guard-offset=$(shell	  \
 			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}' \
-					include/generated/asm-offsets.h))
+				$(objtree)/include/generated/asm-offsets.h))
 endif
 
-ifeq ($(CONFIG_AS_HAS_ARMV8_2), y)
-# make sure to pass the newest target architecture to -march.
-asm-arch := armv8.2-a
-endif
-
-# Ensure that if the compiler supports branch protection we default it
-# off, this will be overridden if we are using branch protection.
-branch-prot-flags-y += $(call cc-option,-mbranch-protection=none)
-
-ifeq ($(CONFIG_ARM64_PTR_AUTH_KERNEL),y)
-branch-prot-flags-$(CONFIG_CC_HAS_SIGN_RETURN_ADDRESS) := -msign-return-address=all
-# We enable additional protection for leaf functions as there is some
-# narrow potential for ROP protection benefits and no substantial
-# performance impact has been observed.
 ifeq ($(CONFIG_ARM64_BTI_KERNEL),y)
-branch-prot-flags-$(CONFIG_CC_HAS_BRANCH_PROT_PAC_RET_BTI) := -mbranch-protection=pac-ret+leaf+bti
+  KBUILD_CFLAGS += -mbranch-protection=pac-ret+bti
+  KBUILD_RUSTFLAGS += -Zbranch-protection=bti,pac-ret
+else ifeq ($(CONFIG_ARM64_PTR_AUTH_KERNEL),y)
+  KBUILD_RUSTFLAGS += -Zbranch-protection=pac-ret
+  ifeq ($(CONFIG_CC_HAS_BRANCH_PROT_PAC_RET),y)
+    KBUILD_CFLAGS += -mbranch-protection=pac-ret
+  else
+    KBUILD_CFLAGS += -msign-return-address=non-leaf
+  endif
 else
-branch-prot-flags-$(CONFIG_CC_HAS_BRANCH_PROT_PAC_RET) := -mbranch-protection=pac-ret+leaf
-endif
-# -march=armv8.3-a enables the non-nops instructions for PAC, to avoid the
-# compiler to generate them and consequently to break the single image contract
-# we pass it only to the assembler. This option is utilized only in case of non
-# integrated assemblers.
-ifeq ($(CONFIG_AS_HAS_PAC), y)
-asm-arch := armv8.3-a
-endif
-endif
-
-KBUILD_CFLAGS += $(branch-prot-flags-y)
-
-ifeq ($(CONFIG_AS_HAS_ARMV8_4), y)
-# make sure to pass the newest target architecture to -march.
-asm-arch := armv8.4-a
+  KBUILD_CFLAGS += $(call cc-option,-mbranch-protection=none)
 endif
 
+# Tell the assembler to support instructions from the latest target
+# architecture.
+#
+# For non-integrated assemblers we'll pass this on the command line, and for
+# integrated assemblers we'll define ARM64_ASM_ARCH and ARM64_ASM_PREAMBLE for
+# inline usage.
+#
+# We cannot pass the same arch flag to the compiler as this would allow it to
+# freely generate instructions which are not supported by earlier architecture
+# versions, which would prevent a single kernel image from working on earlier
+# hardware.
 ifeq ($(CONFIG_AS_HAS_ARMV8_5), y)
-# make sure to pass the newest target architecture to -march.
-asm-arch := armv8.5-a
+  asm-arch := armv8.5-a
+else
+  asm-arch := armv8.4-a
 endif
 
 ifdef asm-arch
@@ -105,6 +113,7 @@ endif
 
 ifeq ($(CONFIG_SHADOW_CALL_STACK), y)
 KBUILD_CFLAGS	+= -ffixed-x18
+KBUILD_RUSTFLAGS += -Zfixed-x18
 endif
 
 ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
@@ -128,14 +137,14 @@ endif
 
 CHECKFLAGS	+= -D__aarch64__
 
-ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_REGS),y)
+ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS),y)
+  KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
+  CC_FLAGS_FTRACE := -fpatchable-function-entry=4,2
+else ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_ARGS),y)
   KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
   CC_FLAGS_FTRACE := -fpatchable-function-entry=2
 endif
 
-# Default value
-head-y		:= arch/arm64/kernel/head.o
-
 ifeq ($(CONFIG_KASAN_SW_TAGS), y)
 KASAN_SHADOW_SCALE_SHIFT := 4
 else ifeq ($(CONFIG_KASAN_GENERIC), y)
@@ -151,39 +160,40 @@ libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
 
 # Default target when executing plain make
 boot		:= arch/arm64/boot
+
+BOOT_TARGETS	:= Image vmlinuz.efi image.fit
+
+PHONY += $(BOOT_TARGETS)
+
+ifeq ($(CONFIG_EFI_ZBOOT),)
 KBUILD_IMAGE	:= $(boot)/Image.gz
+else
+KBUILD_IMAGE	:= $(boot)/vmlinuz.efi
+endif
 
-all:	Image.gz
+all:	$(notdir $(KBUILD_IMAGE))
 
+image.fit: dtbs
 
-Image: vmlinux
+vmlinuz.efi image.fit: Image
+$(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 Image.%: Image
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
-install: KBUILD_IMAGE := $(boot)/Image
+ifeq ($(CONFIG_COMPRESSED_INSTALL),y)
+ DEFAULT_KBUILD_IMAGE = $(KBUILD_IMAGE)
+else
+ DEFAULT_KBUILD_IMAGE = $(boot)/Image
+endif
+
+install: KBUILD_IMAGE := $(DEFAULT_KBUILD_IMAGE)
 install zinstall:
 	$(call cmd,install)
 
-PHONY += vdso_install
-vdso_install:
-	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
-	$(if $(CONFIG_COMPAT_VDSO), \
-		$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@)
-
 archprepare:
 	$(Q)$(MAKE) $(build)=arch/arm64/tools kapi
-ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
-  ifneq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
-	@echo "warning: ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum" >&2
-  endif
-endif
-ifeq ($(CONFIG_ARM64_USE_LSE_ATOMICS),y)
-  ifneq ($(CONFIG_ARM64_LSE_ATOMICS),y)
-	@echo "warning: LSE atomics not supported by binutils" >&2
-  endif
-endif
 
 ifeq ($(KBUILD_EXTMOD),)
 # We need to generate vdso-offsets.h before compiling certain files in kernel/.
@@ -198,14 +208,24 @@ vdso_prepare: prepare0
 	include/generated/vdso-offsets.h arch/arm64/kernel/vdso/vdso.so
 ifdef CONFIG_COMPAT_VDSO
 	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 \
-	include/generated/vdso32-offsets.h arch/arm64/kernel/vdso32/vdso.so
+	arch/arm64/kernel/vdso32/vdso.so
 endif
 endif
 
+vdso-install-y				+= arch/arm64/kernel/vdso/vdso.so.dbg
+vdso-install-$(CONFIG_COMPAT_VDSO)	+= arch/arm64/kernel/vdso32/vdso32.so.dbg
+
+include $(srctree)/scripts/Makefile.defconf
+
+PHONY += virtconfig
+virtconfig:
+	$(call merge_into_defconfig_override,defconfig,virt)
+
 define archhelp
   echo  '* Image.gz      - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
   echo  '  Image         - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
-  echo  '  install       - Install uncompressed kernel'
+  echo  '  image.fit     - Flat Image Tree (arch/$(ARCH)/boot/image.fit)'
+  echo  '  install       - Install kernel (compressed if COMPRESSED_INSTALL set)'
   echo  '  zinstall      - Install compressed kernel'
   echo  '                  Install using (your) ~/bin/installkernel or'
   echo  '                  (distribution) /sbin/installkernel or'
diff --git a/arch/arm64/boot/.gitignore b/arch/arm64/boot/.gitignore
index 9a7a9009d43a..abaae9de1bdd 100644
--- a/arch/arm64/boot/.gitignore
+++ b/arch/arm64/boot/.gitignore
@@ -1,3 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
 Image
 Image.gz
+vmlinuz*
+image.fit
diff --git a/arch/arm64/boot/Makefile b/arch/arm64/boot/Makefile
index a0e3dedd2883..b5a08333bc57 100644
--- a/arch/arm64/boot/Makefile
+++ b/arch/arm64/boot/Makefile
@@ -16,7 +16,8 @@
 
 OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
 
-targets := Image Image.bz2 Image.gz Image.lz4 Image.lzma Image.lzo Image.zst
+targets := Image Image.bz2 Image.gz Image.lz4 Image.lzma Image.lzo \
+	Image.zst Image.xz image.fit
 
 $(obj)/Image: vmlinux FORCE
 	$(call if_changed,objcopy)
@@ -38,3 +39,19 @@ $(obj)/Image.lzo: $(obj)/Image FORCE
 
 $(obj)/Image.zst: $(obj)/Image FORCE
 	$(call if_changed,zstd)
+
+$(obj)/Image.xz: $(obj)/Image FORCE
+	$(call if_changed,xzkern)
+
+$(obj)/image.fit: $(obj)/Image $(obj)/dts/dtbs-list FORCE
+	$(call if_changed,fit)
+
+EFI_ZBOOT_PAYLOAD	:= Image
+EFI_ZBOOT_BFD_TARGET	:= elf64-littleaarch64
+EFI_ZBOOT_MACH_TYPE	:= ARM64
+EFI_ZBOOT_FORWARD_CFI	:= $(CONFIG_ARM64_BTI_KERNEL)
+
+EFI_ZBOOT_OBJCOPY_FLAGS	= --add-symbol zboot_code_size=0x$$( \
+				$(NM) vmlinux|grep _kernel_codesize|cut -d' ' -f1)
+
+include $(srctree)/drivers/firmware/efi/libstub/Makefile.zboot
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 7b107fa7414b..b0844404eda1 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 subdir-y += actions
+subdir-y += airoha
 subdir-y += allwinner
 subdir-y += altera
 subdir-y += amazon
@@ -8,9 +9,12 @@ subdir-y += amlogic
 subdir-y += apm
 subdir-y += apple
 subdir-y += arm
+subdir-y += axiado
 subdir-y += bitmain
+subdir-y += blaize
 subdir-y += broadcom
 subdir-y += cavium
+subdir-y += cix
 subdir-y += exynos
 subdir-y += freescale
 subdir-y += hisilicon
@@ -26,7 +30,9 @@ subdir-y += realtek
 subdir-y += renesas
 subdir-y += rockchip
 subdir-y += socionext
+subdir-y += sophgo
 subdir-y += sprd
+subdir-y += st
 subdir-y += synaptics
 subdir-y += tesla
 subdir-y += ti
diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
index 63e375cd9eb4..bd54b5165129 100644
--- a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
+++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
@@ -24,7 +24,7 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	memory@1,e0000000 {
+	memory@1e0000000 {
 		device_type = "memory";
 		reg = <0x1 0xe0000000 0x0 0x0>;
 	};
diff --git a/arch/arm64/boot/dts/airoha/Makefile b/arch/arm64/boot/dts/airoha/Makefile
new file mode 100644
index 000000000000..ebea112ce1d7
--- /dev/null
+++ b/arch/arm64/boot/dts/airoha/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_ARCH_AIROHA) += en7581-evb.dtb
diff --git a/arch/arm64/boot/dts/airoha/en7581-evb.dts b/arch/arm64/boot/dts/airoha/en7581-evb.dts
new file mode 100644
index 000000000000..dae9968a4ff6
--- /dev/null
+++ b/arch/arm64/boot/dts/airoha/en7581-evb.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7581.dtsi"
+
+/ {
+	model = "Airoha EN7581 Evaluation Board";
+	compatible = "airoha,en7581-evb", "airoha,en7581";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		linux,usable-memory-range = <0x0 0x80200000 0x0 0x1fe00000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x00000000>;
+	};
+};
+
+&spi_nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		bootloader@0 {
+			label = "bootloader";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+
+		art@200000 {
+			label = "art";
+			reg = <0x00200000 0x00400000>;
+		};
+
+		tclinux@600000 {
+			label = "tclinux";
+			reg = <0x00600000 0x03200000>;
+		};
+
+		tclinux_slave@3800000 {
+			label = "tclinux_alt";
+			reg = <0x03800000 0x03200000>;
+		};
+
+		rootfs_data@6a00000 {
+			label = "rootfs_data";
+			reg = <0x06a00000 0x01400000>;
+		};
+
+		reserved_bmt@7e00000 {
+			label = "reserved_bmt";
+			reg = <0x07e00000 0x00200000>;
+			read-only;
+		};
+	};
+};
+
+&en7581_pinctrl {
+	gpio-ranges = <&en7581_pinctrl 0 13 47>;
+
+	pcie0_rst_pins: pcie0-rst-pins {
+		conf {
+			pins = "pcie_reset0";
+			drive-open-drain = <1>;
+		};
+	};
+
+	pcie1_rst_pins: pcie1-rst-pins {
+		conf {
+			pins = "pcie_reset1";
+			drive-open-drain = <1>;
+		};
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_rst_pins>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_rst_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+};
+
+&gdm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/airoha/en7581.dtsi b/arch/arm64/boot/dts/airoha/en7581.dtsi
new file mode 100644
index 000000000000..ff6908a76e8e
--- /dev/null
+++ b/arch/arm64/boot/dts/airoha/en7581.dtsi
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/en7523-clk.h>
+#include <dt-bindings/reset/airoha,en7581-reset.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		npu-binary@84000000 {
+			no-map;
+			reg = <0x0 0x84000000 0x0 0xa00000>;
+		};
+
+		npu-flag@84b0000 {
+			no-map;
+			reg = <0x0 0x84b00000 0x0 0x100000>;
+		};
+
+		npu-pkt@85000000 {
+			no-map;
+			reg = <0x0 0x85000000 0x0 0x1a00000>;
+		};
+
+		npu-phyaddr@86b00000 {
+			no-map;
+			reg = <0x0 0x86b00000 0x0 0x100000>;
+		};
+
+		npu-rxdesc@86d00000 {
+			no-map;
+			reg = <0x0 0x86d00000 0x0 0x100000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	clk20m: clock-20000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@9000000 {
+			compatible = "arm,gic-v3";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x0 0x09000000 0x0 0x20000>,
+			      <0x0 0x09080000 0x0 0x80000>,
+			      <0x0 0x09400000 0x0 0x2000>,
+			      <0x0 0x09500000 0x0 0x2000>,
+			      <0x0 0x09600000 0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		spi@1fa10000 {
+			compatible = "airoha,en7581-snand";
+			reg = <0x0 0x1fa10000 0x0 0x140>,
+			      <0x0 0x1fa11000 0x0 0x160>;
+
+			clocks = <&scuclk EN7523_CLK_SPI>;
+			clock-names = "spi";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			spi_nand: nand@0 {
+				compatible = "spi-nand";
+				reg = <0>;
+
+				spi-max-frequency = <50000000>;
+				spi-tx-bus-width = <1>;
+				spi-rx-bus-width = <2>;
+			};
+		};
+
+		scuclk: clock-controller@1fb00000 {
+			compatible = "airoha,en7581-scu";
+			reg = <0x0 0x1fb00000 0x0 0x970>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pbus_csr: syscon@1fbe3400 {
+			compatible = "airoha,en7581-pbus-csr", "syscon";
+			reg = <0x0 0x1fbe3400 0x0 0xff>;
+		};
+
+		pciephy: phy@1fa5a000 {
+			compatible = "airoha,en7581-pcie-phy";
+			reg = <0x0 0x1fa5a000 0x0 0xfff>,
+			      <0x0 0x1fa5b000 0x0 0xfff>,
+			      <0x0 0x1fa5c000 0x0 0xfff>,
+			      <0x0 0x1fc10044 0x0 0x4>,
+			      <0x0 0x1fc30044 0x0 0x4>,
+			      <0x0 0x1fc15030 0x0 0x104>;
+			reg-names = "csr-2l", "pma0", "pma1",
+				    "p0-xr-dtime", "p1-xr-dtime",
+				    "rx-aeq";
+			#phy-cells = <0>;
+		};
+
+		pcie0: pcie@1fc00000 {
+			compatible = "airoha,en7581-pcie";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			reg = <0x0 0x1fc00000 0x0 0x1670>;
+			reg-names = "pcie-mac";
+
+			clocks = <&scuclk EN7523_CLK_PCIE>;
+			clock-names = "sys-ck";
+
+			phys = <&pciephy>;
+			phy-names = "pcie-phy";
+
+			ranges = <0x02000000 0 0x20000000 0x0 0x20000000 0 0x4000000>;
+
+			resets = <&scuclk EN7581_PCIE0_RST>,
+				 <&scuclk EN7581_PCIE1_RST>,
+				 <&scuclk EN7581_PCIE2_RST>;
+			reset-names = "phy-lane0", "phy-lane1", "phy-lane2";
+
+			mediatek,pbus-csr = <&pbus_csr 0x0 0x4>;
+
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+
+			status = "disabled";
+
+			pcie_intc0: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		pcie1: pcie@1fc20000 {
+			compatible = "airoha,en7581-pcie";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			reg = <0x0 0x1fc20000 0x0 0x1670>;
+			reg-names = "pcie-mac";
+
+			clocks = <&scuclk EN7523_CLK_PCIE>;
+			clock-names = "sys-ck";
+
+			phys = <&pciephy>;
+			phy-names = "pcie-phy";
+
+			ranges = <0x02000000 0 0x24000000 0x0 0x24000000 0 0x4000000>;
+
+			resets = <&scuclk EN7581_PCIE0_RST>,
+				 <&scuclk EN7581_PCIE1_RST>,
+				 <&scuclk EN7581_PCIE2_RST>;
+			reset-names = "phy-lane0", "phy-lane1", "phy-lane2";
+
+			mediatek,pbus-csr = <&pbus_csr 0x8 0xc>;
+
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+
+			status = "disabled";
+
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		uart1: serial@1fbf0000 {
+			compatible = "ns16550";
+			reg = <0x0 0x1fbf0000 0x0 0x30>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <1843200>;
+		};
+
+		rng@1faa1000 {
+			compatible = "airoha,en7581-trng";
+			reg = <0x0 0x1faa1000 0x0 0xc04>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		system-controller@1fbf0200 {
+			compatible = "airoha,en7581-gpio-sysctl", "syscon",
+				     "simple-mfd";
+			reg = <0x0 0x1fbf0200 0x0 0xc0>;
+
+			en7581_pinctrl: pinctrl {
+				compatible = "airoha,en7581-pinctrl";
+
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		i2c0: i2c@1fbf8000 {
+			compatible = "mediatek,mt7621-i2c";
+			reg = <0x0 0x1fbf8000 0x0 0x100>;
+
+			resets = <&scuclk EN7581_I2C2_RST>;
+
+			clocks = <&clk20m>;
+			clock-frequency = <100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c1: i2c@1fbf8100 {
+			compatible = "mediatek,mt7621-i2c";
+			reg = <0x0 0x1fbf8100 0x0 0x100>;
+
+			resets = <&scuclk EN7581_I2C_MASTER_RST>;
+
+			clocks = <&clk20m>;
+			clock-frequency = <100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		eth: ethernet@1fb50000 {
+			compatible = "airoha,en7581-eth";
+			reg = <0 0x1fb50000 0 0x2600>,
+			      <0 0x1fb54000 0 0x2000>,
+			      <0 0x1fb56000 0 0x2000>;
+			reg-names = "fe", "qdma0", "qdma1";
+
+			resets = <&scuclk EN7581_FE_RST>,
+				 <&scuclk EN7581_FE_PDMA_RST>,
+				 <&scuclk EN7581_FE_QDMA_RST>,
+				 <&scuclk EN7581_XSI_MAC_RST>,
+				 <&scuclk EN7581_DUAL_HSI0_MAC_RST>,
+				 <&scuclk EN7581_DUAL_HSI1_MAC_RST>,
+				 <&scuclk EN7581_HSI_MAC_RST>,
+				 <&scuclk EN7581_XFP_MAC_RST>;
+			reset-names = "fe", "pdma", "qdma",
+				      "xsi-mac", "hsi0-mac", "hsi1-mac",
+				      "hsi-mac", "xfp-mac";
+
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gdm1: ethernet@1 {
+				compatible = "airoha,eth-mac";
+				reg = <1>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <10000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 6a96494a2e0a..2edfa7bf4ab3 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -16,7 +16,9 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab-early-adopter.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h64-remix-mini-pc.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a133-liontron-h-a133l.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb
@@ -38,5 +40,22 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-tanix-tx1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-x96q.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-longanpi-3h.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero2w.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-transpeed-8k618-t.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-yuzukihd-chameleon.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-2024.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-h.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-plus.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-sp.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-a527-cubie-a5e.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-h728-x96qpro+.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-t527-avaota-a1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-t527-orangepi-4a.dtb
diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
index 578ef368e2b4..a6b4b87f185d 100644
--- a/arch/arm64/boot/dts/allwinner/axp803.dtsi
+++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
@@ -25,16 +25,6 @@
 		compatible = "x-powers,axp803-gpio", "x-powers,axp813-gpio";
 		gpio-controller;
 		#gpio-cells = <2>;
-
-		gpio0_ldo: gpio0-ldo-pin {
-			pins = "GPIO0";
-			function = "ldo";
-		};
-
-		gpio1_ldo: gpio1-ldo-pin {
-			pins = "GPIO1";
-			function = "ldo";
-		};
 	};
 
 	battery_power_supply: battery-power {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
index d34c2bb1079f..a7e3be0155a8 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
  */
@@ -6,6 +6,9 @@
 /dts-v1/;
 
 #include "sun50i-a100.dtsi"
+#include "sun50i-a100-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
 
 /{
 	model = "Allwinner A100 Perf1";
@@ -20,6 +23,26 @@
 	};
 };
 
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_aldo1>;
+	cap-mmc-hw-reset;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &pio {
 	vcc-pb-supply = <&reg_dcdc1>;
 	vcc-pc-supply = <&reg_eldo1>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
new file mode 100644
index 000000000000..c6a2efa037dc
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
+// Copyright (c) 2020 ShuoSheng Huang <huangshuosheng@allwinnertech.com>
+
+/ {
+	cpu_opp_table: opp-table-cpu {
+		compatible = "allwinner,sun50i-a100-operating-points";
+		nvmem-cells = <&cpu_speed_grade>;
+		opp-shared;
+
+		opp-408000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <408000000>;
+
+			opp-microvolt-speed0 = <900000>;
+			opp-microvolt-speed1 = <900000>;
+			opp-microvolt-speed2 = <900000>;
+		};
+
+		opp-600000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <600000000>;
+
+			opp-microvolt-speed0 = <900000>;
+			opp-microvolt-speed1 = <900000>;
+			opp-microvolt-speed2 = <900000>;
+		};
+
+		opp-816000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <816000000>;
+
+			opp-microvolt-speed0 = <940000>;
+			opp-microvolt-speed1 = <900000>;
+			opp-microvolt-speed2 = <900000>;
+		};
+
+		opp-1080000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1080000000>;
+
+			opp-microvolt-speed0 = <1020000>;
+			opp-microvolt-speed1 = <980000>;
+			opp-microvolt-speed2 = <950000>;
+		};
+
+		opp-1200000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1200000000>;
+
+			opp-microvolt-speed0 = <1100000>;
+			opp-microvolt-speed1 = <1020000>;
+			opp-microvolt-speed2 = <1000000>;
+		};
+
+		opp-1320000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1320000000>;
+
+			opp-microvolt-speed0 = <1160000>;
+			opp-microvolt-speed1 = <1060000>;
+			opp-microvolt-speed2 = <1030000>;
+		};
+
+		opp-1464000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1464000000>;
+
+			opp-microvolt-speed0 = <1180000>;
+			opp-microvolt-speed1 = <1180000>;
+			opp-microvolt-speed2 = <1130000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
index 548539c93ab0..bb5f9e4f3d42 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
  */
@@ -23,30 +23,43 @@
 			device_type = "cpu";
 			reg = <0x0>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <0x1>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <0x2>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <0x3>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -92,6 +105,39 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0x3fffffff>;
 
+		syscon: syscon@3000000 {
+			compatible = "allwinner,sun50i-a100-system-control",
+				     "allwinner,sun50i-a64-system-control";
+			reg = <0x03000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a1: sram@20000 {
+				compatible = "mmio-sram";
+				reg = <0x00020000 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00020000 0x4000>;
+			};
+
+			sram_c: sram@24000 {
+				compatible = "mmio-sram";
+				reg = <0x024000 0x21000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x024000 0x21000>;
+			};
+
+			sram_a2: sram@100000 {
+				compatible = "mmio-sram";
+				reg = <0x0100000 0x14000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x0100000 0x14000>;
+			};
+		};
+
 		ccu: clock@3001000 {
 			compatible = "allwinner,sun50i-a100-ccu";
 			reg = <0x03001000 0x1000>;
@@ -101,6 +147,18 @@
 			#reset-cells = <1>;
 		};
 
+		dma: dma-controller@3002000 {
+			compatible = "allwinner,sun50i-a100-dma";
+			reg = <0x03002000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+			clock-names = "bus", "mbus";
+			resets = <&ccu RST_BUS_DMA>;
+			dma-channels = <8>;
+			dma-requests = <52>;
+			#dma-cells = <1>;
+		};
+
 		gic: interrupt-controller@3021000 {
 			compatible = "arm,gic-400";
 			reg = <0x03021000 0x1000>, <0x03022000 0x2000>,
@@ -121,6 +179,18 @@
 			ths_calibration: calib@14 {
 				reg = <0x14 8>;
 			};
+
+			cpu_speed_grade: cpu-speed-grade@1c {
+				reg = <0x1c 0x2>;
+			};
+		};
+
+		watchdog@30090a0 {
+			compatible = "allwinner,sun50i-a100-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x030090a0 0x20>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&dcxo24M>;
 		};
 
 		pio: pinctrl@300b000 {
@@ -140,12 +210,101 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC0", "PC1", "PC5", "PC6",
+				       "PC8", "PC9", "PC10", "PC11",
+				       "PC13", "PC14", "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			rgmii0_pins: rgmii0-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH9", "PH10",
+				       "PH14", "PH15", "PH16", "PH17", "PH18";
+				function = "emac0";
+				drive-strength = <40>;
+			};
+
+			rmii0_pins: rmii0-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH9", "PH10";
+				function = "emac0";
+				drive-strength = <40>;
+			};
+
 			uart0_pb_pins: uart0-pb-pins {
 				pins = "PB9", "PB10";
 				function = "uart0";
 			};
 		};
 
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun50i-a100-mmc";
+			reg = <0x04020000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun50i-a100-mmc";
+			reg = <0x04021000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun50i-a100-emmc";
+			reg = <0x04022000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		uart0: serial@5000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x05000000 0x400>;
@@ -209,6 +368,8 @@
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C0>;
 			resets = <&ccu RST_BUS_I2C0>;
+			dmas = <&dma 43>, <&dma 43>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -222,6 +383,8 @@
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C1>;
 			resets = <&ccu RST_BUS_I2C1>;
+			dmas = <&dma 44>, <&dma 44>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -235,6 +398,8 @@
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C2>;
 			resets = <&ccu RST_BUS_I2C2>;
+			dmas = <&dma 45>, <&dma 45>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -248,11 +413,33 @@
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C3>;
 			resets = <&ccu RST_BUS_I2C3>;
+			dmas = <&dma 46>, <&dma 46>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
+		emac0: ethernet@5020000 {
+			compatible = "allwinner,sun50i-a100-emac",
+				     "allwinner,sun50i-a64-emac";
+			reg = <0x5020000 0x10000>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			syscon = <&syscon>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		ths: thermal-sensor@5070400 {
 			compatible = "allwinner,sun50i-a100-ths";
 			reg = <0x05070400 0x100>;
@@ -265,6 +452,97 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		usb_otg: usb@5100000 {
+			compatible = "allwinner,sun50i-a100-musb",
+				     "allwinner,sun8i-a33-musb";
+			reg = <0x05100000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@5100400 {
+			compatible = "allwinner,sun50i-a100-usb-phy",
+				     "allwinner,sun20i-d1-usb-phy";
+			reg = <0x05100400 0x100>,
+			      <0x05101800 0x100>,
+			      <0x05200800 0x100>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@5101000 {
+			compatible = "allwinner,sun50i-a100-ehci",
+				     "generic-ehci";
+			reg = <0x05101000 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@5101400 {
+			compatible = "allwinner,sun50i-a100-ohci",
+				     "generic-ohci";
+			reg = <0x05101400 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@5200000 {
+			compatible = "allwinner,sun50i-a100-ehci",
+				     "generic-ehci";
+			reg = <0x05200000 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@5200400 {
+			compatible = "allwinner,sun50i-a100-ohci",
+				     "generic-ohci";
+			reg = <0x05200400 0x100>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
 		r_ccu: clock@7010000 {
 			compatible = "allwinner,sun50i-a100-r-ccu";
 			reg = <0x07010000 0x300>;
@@ -325,6 +603,8 @@
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&r_ccu CLK_R_APB2_I2C0>;
 			resets = <&r_ccu RST_R_APB2_I2C0>;
+			dmas = <&dma 50>, <&dma 50>;
+			dma-names = "rx", "tx";
 			pinctrl-names = "default";
 			pinctrl-0 = <&r_i2c0_pins>;
 			status = "disabled";
@@ -340,6 +620,8 @@
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&r_ccu CLK_R_APB2_I2C1>;
 			resets = <&r_ccu RST_R_APB2_I2C1>;
+			dmas = <&dma 51>, <&dma 51>;
+			dma-names = "rx", "tx";
 			pinctrl-names = "default";
 			pinctrl-0 = <&r_i2c1_pins>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts b/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts
new file mode 100644
index 000000000000..90a50910f07b
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a100.dtsi"
+#include "sun50i-a100-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/{
+	model = "Liontron H-A133L";
+	compatible = "liontron,h-a133l", "allwinner,sun50i-a100";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from a 12V->5V regulator */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		enable-active-high;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii0_pins>;
+	phy-handle = <&rmii_phy>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&mdio0 {
+	reset-gpios = <&pio 7 12 GPIO_ACTIVE_LOW>; /* PH12 */
+	reset-delay-us = <2000>;
+	reset-post-delay-us = <2000>;
+
+	rmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
+	cap-mmc-hw-reset;
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_eldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp803: pmic@34 {
+		compatible = "x-powers,axp803";
+		reg = <0x34>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-codec-avcc";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dram-1";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-pl";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io-usb-pd-emmc";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <810000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-cpux";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-usb-cpus";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <950000>;
+	regulator-max-microvolt = <950000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vcc-dram";
+};
+
+/* DCDC6 unused */
+/* DLDO3 unused */
+/* DLDO4 unused */
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pc-emmc";
+};
+
+/* ELDO2 unused */
+/* ELDO3 unused */
+
+&reg_fldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-cpus-usb";
+};
+
+/* reg_drivevbus unused */
+/* dc1sw unused */
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";       /* USB A type receptacle, always powered */
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index e6d5bc0f7a61..d1f415acd7b5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -53,7 +53,7 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
index 0af6dcdf7515..dec9960a7440 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -41,7 +41,7 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index bfb806cf6d7a..fd3794678c33 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -52,7 +52,7 @@
 		status = "okay";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 	};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index 4f8529d5ac00..c8303a66438d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -68,7 +68,7 @@
 		status = "okay";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
index 596a25907432..709fe650a360 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
@@ -5,7 +5,7 @@
 #include "sun50i-a64-sopine-baseboard.dts"
 
 / {
-	model = "Pine64 LTS";
+	model = "Pine64 PINE A64 LTS";
 	compatible = "pine64,pine64-lts", "allwinner,sun50i-r18",
 		     "allwinner,sun50i-a64";
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
index b54099b654c8..026d843cd7e0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@@ -4,7 +4,7 @@
 #include "sun50i-a64-pine64.dts"
 
 / {
-	model = "Pine64+";
+	model = "Pine64 PINE A64+";
 	compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
 
 	/* TODO: Camera, touchscreen, etc. */
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 2accb5ddf783..3256acec1ff9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -9,7 +9,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Pine64";
+	model = "Pine64 PINE A64";
 	compatible = "pine64,pine64", "allwinner,sun50i-a64";
 
 	aliases {
@@ -124,6 +124,17 @@
 	status = "okay";
 };
 
+/* On Wifi/BT connector */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "disabled";
+};
+
 &ohci0 {
 	status = "okay";
 };
@@ -286,6 +297,7 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 620cb3ef5f6c..86d44349e095 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -13,7 +13,7 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
-	model = "Pinebook";
+	model = "Pine64 Pinebook";
 	compatible = "pine64,pinebook", "allwinner,sun50i-a64";
 	chassis-type = "laptop";
 
@@ -79,7 +79,7 @@
 		enable-active-high;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 	};
@@ -390,6 +390,8 @@
 &tcon0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&lcd_rgb666_pins>;
+	assigned-clocks = <&ccu CLK_TCON0>;
+	assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>;
 
 	status = "okay";
 };
@@ -406,6 +408,20 @@
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723cs-bt";
+		device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+		enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	};
+};
+
 &usb_otg {
 	dr_mode = "host";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index 87847116ab6d..4bc6c1ef2cde 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -39,25 +39,35 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led-0 {
+		led0: led-0 {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+			retain-state-suspended;
 		};
 
-		led-1 {
+		led1: led-1 {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
+			retain-state-suspended;
 		};
 
-		led-2 {
+		led2: led-2 {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_RED>;
 			gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+			retain-state-suspended;
 		};
 	};
 
+	multi-led {
+		compatible = "leds-group-multicolor";
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_INDICATOR;
+		leds = <&led0>, <&led1>, <&led2>;
+	};
+
 	reg_ps: ps-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "ps";
@@ -178,12 +188,30 @@
 &i2c1 {
 	status = "okay";
 
+	/* Alternative magnetometer */
+	af8133j: magnetometer@1c {
+		compatible = "voltafield,af8133j";
+		reg = <0x1c>;
+		reset-gpios = <&pio 1 1 GPIO_ACTIVE_LOW>;
+		avdd-supply = <&reg_dldo1>;
+		dvdd-supply = <&reg_dldo1>;
+		mount-matrix = "0", "-1", "0",
+				"-1", "0", "0",
+				"0", "0", "-1";
+
+		/* status will be fixed up in firmware */
+		status = "disabled";
+	};
+
 	/* Magnetometer */
 	lis3mdl: magnetometer@1e {
 		compatible = "st,lis3mdl-magn";
 		reg = <0x1e>;
 		vdd-supply = <&reg_dldo1>;
 		vddio-supply = <&reg_dldo1>;
+		mount-matrix = "0", "1", "0",
+				"-1", "0", "0",
+				"0", "0", "1";
 	};
 
 	/* Light/proximity sensor */
@@ -202,6 +230,9 @@
 		interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
 		vdd-supply = <&reg_dldo1>;
 		vddio-supply = <&reg_dldo1>;
+		mount-matrix = "0", "1", "0",
+			       "-1", "0", "0",
+			       "0", "0", "1";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts
index 6265360ce623..86cc85eb3d48 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts
@@ -9,7 +9,7 @@
 #include "sun50i-a64-pinetab.dts"
 
 / {
-	model = "PineTab, Early Adopter's version";
+	model = "Pine64 PineTab Early Adopter";
 	compatible = "pine64,pinetab-early-adopter", "allwinner,sun50i-a64";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
index 0a5607f73049..f5fb1ee32dad 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
@@ -14,7 +14,7 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
-	model = "PineTab, Development Sample";
+	model = "Pine64 PineTab Developer Sample";
 	compatible = "pine64,pinetab", "allwinner,sun50i-a64";
 	chassis-type = "tablet";
 
@@ -98,7 +98,7 @@
 		enable-active-high;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 		post-power-on-delay-ms = <200>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index 5e66ce1a334f..231e652cab67 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -8,7 +8,7 @@
 #include "sun50i-a64-sopine.dtsi"
 
 / {
-	model = "SoPine with baseboard";
+	model = "Pine64 SOPINE on Baseboard carrier board";
 	compatible = "pine64,sopine-baseboard", "pine64,sopine",
 		     "allwinner,sun50i-a64";
 
@@ -103,6 +103,17 @@
 	};
 };
 
+/* On Wifi/BT connector */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "disabled";
+};
+
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
@@ -175,6 +186,14 @@
 	status = "okay";
 };
 
+/* On Wifi/BT connector, with RTS/CTS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
 /* On Pi-2 connector */
 &uart2 {
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index 1128030e4c25..ec055510af8b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -74,7 +74,7 @@
 		status = "okay";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 	};
@@ -369,6 +369,8 @@
 &tcon0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&lcd_rgb666_pins>;
+	assigned-clocks = <&ccu CLK_TCON0>;
+	assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 77b5349f6087..0fecf0abb204 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -51,10 +51,16 @@
 			device_type = "cpu";
 			reg = <0>;
 			enable-method = "psci";
-			next-level-cache = <&L2>;
 			clocks = <&ccu CLK_CPUX>;
 			clock-names = "cpu";
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu1: cpu@1 {
@@ -62,10 +68,16 @@
 			device_type = "cpu";
 			reg = <1>;
 			enable-method = "psci";
-			next-level-cache = <&L2>;
 			clocks = <&ccu CLK_CPUX>;
 			clock-names = "cpu";
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu2: cpu@2 {
@@ -73,10 +85,16 @@
 			device_type = "cpu";
 			reg = <2>;
 			enable-method = "psci";
-			next-level-cache = <&L2>;
 			clocks = <&ccu CLK_CPUX>;
 			clock-names = "cpu";
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu3: cpu@3 {
@@ -84,15 +102,25 @@
 			device_type = "cpu";
 			reg = <3>;
 			enable-method = "psci";
-			next-level-cache = <&L2>;
 			clocks = <&ccu CLK_CPUX>;
 			clock-names = "cpu";
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
-		L2: l2-cache {
+		l2_cache: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -106,27 +134,19 @@
 	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
-		opp-120000000 {
-			opp-hz = /bits/ 64 <120000000>;
-		};
-
-		opp-312000000 {
-			opp-hz = /bits/ 64 <312000000>;
-		};
-
 		opp-432000000 {
 			opp-hz = /bits/ 64 <432000000>;
 		};
 	};
 
-	osc24M: osc24M_clk {
+	osc24M: osc24M-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 		clock-output-names = "osc24M";
 	};
 
-	osc32k: osc32k_clk {
+	osc32k: osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
@@ -215,21 +235,21 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_alert1: cpu_alert1 {
+				cpu_alert1: cpu-alert1 {
 					/* milliCelsius */
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <110000>;
 					hysteresis = <2000>;
@@ -243,6 +263,14 @@
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 1>;
+
+			trips {
+				gpu0_crit: gpu0-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
 		gpu1_thermal: gpu1-thermal {
@@ -250,6 +278,14 @@
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 2>;
+
+			trips {
+				gpu1_crit: gpu1-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
@@ -407,8 +443,10 @@
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
 			clock-names = "ahb", "tcon-ch0";
-			clock-output-names = "tcon-pixel-clock";
+			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
+			assigned-clocks = <&ccu CLK_TCON0>;
+			assigned-clock-parents = <&ccu CLK_PLL_MIPI>;
 			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
 			reset-names = "lcd", "lvds";
 
@@ -1199,6 +1237,7 @@
 			compatible = "allwinner,sun50i-a64-mipi-dphy",
 				     "allwinner,sun6i-a31-mipi-dphy";
 			reg = <0x01ca1000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_MIPI_DSI>,
 				 <&ccu CLK_DSI_DPHY>;
 			clock-names = "bus", "mod";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts
new file mode 100644
index 000000000000..7906b79c0389
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Tanix TX1";
+	compatible = "oranth,tanix-tx1", "allwinner,sun50i-h616";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &sdio_wifi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key {
+			label = "hidden";
+			linux,code = <BTN_0>;
+			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+			default-state = "on";
+		};
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&x32clk_fanout_pin>;
+		pinctrl-names = "default";
+		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	bus-width = <8>;
+	non-removable;
+	max-frequency = <100000000>;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+	vcc-ph-supply = <&reg_dldo1>;
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies VCC-PLL, so needs to be always on. */
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Supplies VCC-IO, so needs to be always on. */
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1120000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";       /* USB A type receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts
new file mode 100644
index 000000000000..b2275eb3d55b
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "X96Q";
+	compatible = "amediatech,x96q", "allwinner,sun50i-h616";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 7 6 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+/* TODO: EMAC1 connected to AC200 PHY */
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&mmc0 {
+	/* microSD */
+	vmmc-supply = <&reg_aldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* TODO: XRadio XR819 WLAN @ mmc1 */
+
+&mmc2 {
+	/* eMMC */
+	vmmc-supply = <&reg_aldo1>;
+	vqmmc-supply = <&reg_bldo1>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <100000000>; /* required for stable operation */
+	bus-width = <8>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp305: pmic@36 {
+		compatible = "x-powers,axp305", "x-powers,axp805",
+			     "x-powers,axp806";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x36>;
+
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			dcdcb {
+				/* unused */
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd-dram";
+			};
+
+			dcdce {
+				/* unused */
+			};
+
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			aldo2 {
+				/* unused */
+			};
+
+			aldo3 {
+				/* unused */
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			bldo2 {
+				/* unused */
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			cldo1 {
+				/* unused */
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";	/* USB A type receptacle */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts
index 8857a3791593..6406a29c85f2 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts
@@ -4,7 +4,7 @@
 /dts-v1/;
 #include "sun50i-h5.dtsi"
 #include "sun50i-h5-cpu-opp.dtsi"
-#include <arm/sunxi-bananapi-m2-plus-v1.2.dtsi>
+#include <arm/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi>
 
 / {
 	model = "Banana Pi BPI-M2-Plus v1.2 H5";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts
index 77661006dfba..cfb943e9ae85 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts
@@ -3,7 +3,7 @@
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
-#include <arm/sunxi-bananapi-m2-plus.dtsi>
+#include <arm/allwinner/sunxi-bananapi-m2-plus.dtsi>
 
 / {
 	model = "Banana Pi BPI-M2-Plus H5";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
index fc570011495f..2f4b46746f47 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
@@ -8,4 +8,4 @@
 /dts-v1/;
 
 #include "sun50i-h5.dtsi"
-#include <arm/sunxi-h3-h5-emlid-neutis.dtsi>
+#include <arm/allwinner/sunxi-h3-h5-emlid-neutis.dtsi>
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
index d811df332824..b79018c65cae 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
@@ -5,7 +5,7 @@
 /dts-v1/;
 #include "sun50i-h5.dtsi"
 #include "sun50i-h5-cpu-opp.dtsi"
-#include <arm/sunxi-libretech-all-h3-cc.dtsi>
+#include <arm/allwinner/sunxi-libretech-all-h3-cc.dtsi>
 
 / {
 	model = "Libre Computer Board ALL-H3-CC H5";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts
index e59d68b525fc..dc657de2a1a4 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts
@@ -3,7 +3,7 @@
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
-#include <arm/sunxi-libretech-all-h3-it.dtsi>
+#include <arm/allwinner/sunxi-libretech-all-h3-it.dtsi>
 
 / {
 	model = "Libre Computer Board ALL-H3-IT H5";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
index 4c3921ac236c..18fa541795a6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
@@ -45,16 +45,40 @@
 		startup-delay-us = <100000>;
 		enable-active-high;
 		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_vcc3v3>;
+	};
+
+	reg_gmac_2v5: gmac-2v5 {
+		/* 2V5 supply for GMAC PHY IO */
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-2v5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc3v3>;
+	};
+
+	reg_vcc5v: regulator-vcc5v {
+		/* board 5V supply from micro USB or pin headers */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
 	};
 
 	reg_vcc3v3: vcc3v3 {
+		/* board 3V3 supply by SY8089A */
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc5v>;
 	};
 
 	vdd_cpux: gpio-regulator {
+		/* cpu voltage regulator MP2143DJ */
 		compatible = "regulator-gpio";
 		regulator-name = "vdd-cpux";
 		regulator-type = "voltage";
@@ -66,9 +90,10 @@
 		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
 		gpios-states = <0x1>;
 		states = <1100000 0>, <1300000 1>;
+		vin-supply = <&reg_vcc5v>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		post-power-on-delay-ms = <200>;
@@ -111,6 +136,7 @@
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
 	status = "okay";
 };
 
@@ -146,6 +172,18 @@
 	status = "okay";
 };
 
+&pio {
+	vcc-pa-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pd-supply = <&reg_gmac_2v5>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+};
+
+&r_pio {
+	vcc-pl-supply = <&reg_vcc3v3>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pa_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
index 05486cccee1c..128295f5a5d6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
@@ -88,6 +88,7 @@
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
index a3e040da38a0..44fdc8b3f79d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
@@ -103,7 +103,7 @@
 		states = <1100000 0x0>, <1300000 0x1>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 		post-power-on-delay-ms = <200>;
@@ -157,6 +157,7 @@
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
@@ -170,7 +171,7 @@
 	non-removable;
 	status = "okay";
 
-	rtl8189etv: sdio_wifi@1 {
+	rtl8189etv: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index b5c1ff19b4c4..0f29da7d51e6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -3,6 +3,7 @@
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -152,6 +153,7 @@
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
index d7f8bad6bb98..d4fc4e60e4e7 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -85,7 +85,7 @@
 		status = "okay";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */
 	};
@@ -153,6 +153,7 @@
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
index 7ec5ac850a0d..3322cc4d9aa4 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
@@ -82,6 +82,7 @@
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
@@ -97,7 +98,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189ftv: sdio_wifi@1 {
+	rtl8189ftv: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index 22530ace12d5..3eb986c354a9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -52,7 +52,7 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
 		post-power-on-delay-ms = <200>;
@@ -79,6 +79,7 @@
 
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
+	disable-wp;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index a56fae761a1f..01a29c1988a6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 // Copyright (C) 2016 ARM Ltd.
 
-#include <arm/sunxi-h3-h5.dtsi>
+#include <arm/allwinner/sunxi-h3-h5.dtsi>
 
 #include <dt-bindings/thermal/thermal.h>
 
@@ -16,7 +16,6 @@
 			reg = <0>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 
@@ -26,7 +25,6 @@
 			reg = <1>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 
@@ -36,7 +34,6 @@
 			reg = <2>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 
@@ -46,7 +43,6 @@
 			reg = <3>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 	};
@@ -207,7 +203,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu_hot_trip>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 6249e9e02928..2c64d834a2c4 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -5,6 +5,7 @@
 
 #include "sun50i-h6.dtsi"
 #include "sun50i-h6-cpu-opp.dtsi"
+#include "sun50i-h6-gpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -33,7 +34,7 @@
 		};
 	};
 
-	ext_osc32k: ext_osc32k_clk {
+	ext_osc32k: ext-osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
@@ -128,6 +129,7 @@
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
@@ -150,28 +152,12 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_ir {
-	linux,rc-map-name = "rc-beelink-gs1";
-	status = "okay";
-};
-
-&r_pio {
-	/*
-	 * FIXME: We can't add that supply for now since it would
-	 * create a circular dependency between pinctrl, the regulator
-	 * and the RSB Bus.
-	 *
-	 * vcc-pl-supply = <&reg_aldo1>;
-	 */
-	vcc-pm-supply = <&reg_aldo1>;
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -289,7 +275,25 @@
 	};
 };
 
+&r_ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+	status = "okay";
+};
+
+&r_pio {
+	/*
+	 * PL0 and PL1 are used for PMIC I2C
+	 * don't enable the pl-supply else
+	 * it will fail at boot
+	 *
+	 * vcc-pl-supply = <&reg_aldo1>;
+	 */
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi
new file mode 100644
index 000000000000..b48049c4fc85
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2022 Clément Péron <peron.clem@gmail.com>
+
+/ {
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-216000000 {
+			opp-hz = /bits/ 64 <216000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp-264000000 {
+			opp-hz = /bits/ 64 <264000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp-336000000 {
+			opp-hz = /bits/ 64 <336000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp-360000000 {
+			opp-hz = /bits/ 64 <360000000>;
+			opp-microvolt = <820000 820000 1200000>;
+		};
+
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-microvolt = <830000 830000 1200000>;
+		};
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <840000 840000 1200000>;
+		};
+
+		opp-420000000 {
+			opp-hz = /bits/ 64 <420000000>;
+			opp-microvolt = <850000 850000 1200000>;
+		};
+
+		opp-432000000 {
+			opp-hz = /bits/ 64 <432000000>;
+			opp-microvolt = <860000 860000 1200000>;
+		};
+
+		opp-456000000 {
+			opp-hz = /bits/ 64 <456000000>;
+			opp-microvolt = <870000 870000 1200000>;
+		};
+
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <890000 890000 1200000>;
+		};
+
+		opp-540000000 {
+			opp-hz = /bits/ 64 <540000000>;
+			opp-microvolt = <910000 910000 1200000>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-microvolt = <930000 930000 1200000>;
+		};
+
+		opp-624000000 {
+			opp-hz = /bits/ 64 <624000000>;
+			opp-microvolt = <950000 950000 1200000>;
+		};
+
+		opp-756000000 {
+			opp-hz = /bits/ 64 <756000000>;
+			opp-microvolt = <1040000 1040000 1200000>;
+		};
+	};
+};
+
+&gpu {
+	operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index 6fc65e8db220..dc7381c944c9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -33,7 +33,7 @@
 		};
 	};
 
-	ext_osc32k: ext_osc32k_clk {
+	ext_osc32k: ext-osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
@@ -131,6 +131,7 @@
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
@@ -143,7 +144,7 @@
 	non-removable;
 	status = "okay";
 
-	brcm: sdio-wifi@1 {
+	brcm: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&r_pio>;
@@ -175,16 +176,12 @@
 	vcc-pg-supply = <&reg_vcc_wifi_io>;
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -295,6 +292,10 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
index fb31dcb1cb6d..0911c537cc6b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
@@ -11,7 +11,7 @@
 		serial1 = &uart1; /* BT-UART */
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
@@ -28,7 +28,7 @@
 	non-removable;
 	status = "okay";
 
-	brcm: sdio-wifi@1 {
+	brcm: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&r_pio>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index 92745128fcfe..e34dbb992021 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -32,7 +32,7 @@
 		};
 	};
 
-	ext_osc32k: ext_osc32k_clk {
+	ext_osc32k: ext-osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
@@ -94,6 +94,7 @@
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
@@ -112,20 +113,12 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_pio {
-	vcc-pm-supply = <&reg_bldo3>;
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -240,6 +233,14 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pm-supply = <&reg_bldo3>;
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
index 686f58e77004..066fbeff8bfa 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
@@ -1,17 +1,17 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2019 Corentin LABBE <clabbe@baylibre.com>
  */
 
 #include "sun50i-h6-pine-h64.dts"
 
+/delete-node/ &reg_gmac_3v3;
+
 / {
-	model = "Pine H64 model B";
+	model = "Pine64 PINE H64 Model B";
 	compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
 
-	/delete-node/ reg_gmac_3v3;
-
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
 		post-power-on-delay-ms = <200>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 1ffd68f43f87..fa7a765ee828 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -9,7 +9,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Pine H64 model A";
+	model = "Pine64 PINE H64 Model A";
 	compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
 
 	aliases {
@@ -22,7 +22,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	ext_osc32k: ext_osc32k_clk {
+	ext_osc32k: ext-osc32k-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
@@ -133,6 +133,7 @@
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
index 4903d6358112..bb7de37c0d58 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
@@ -124,6 +124,7 @@
 	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
@@ -166,6 +167,8 @@
 };
 
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 5a28303d3d4c..73e8604315c5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -27,8 +27,14 @@
 			reg = <0>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu1: cpu@1 {
@@ -37,8 +43,14 @@
 			reg = <1>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu2: cpu@2 {
@@ -47,8 +59,14 @@
 			reg = <2>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu3: cpu@3 {
@@ -57,8 +75,23 @@
 			reg = <3>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -68,7 +101,7 @@
 		status = "disabled";
 	};
 
-	osc24M: osc24M_clk {
+	osc24M: osc24M-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
@@ -161,6 +194,7 @@
 			clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>;
 			clock-names = "bus", "mod";
 			resets = <&ccu RST_BUS_VP9>;
+			iommus = <&iommu 5>;
 		};
 
 		video-codec@1c0e000 {
@@ -186,6 +220,7 @@
 			clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
 			clock-names = "core", "bus";
 			resets = <&ccu RST_BUS_GPU>;
+			#cooling-cells = <2>;
 			status = "disabled";
 		};
 
@@ -404,6 +439,7 @@
 				function = "spi1";
 			};
 
+			/omit-if-no-ref/
 			spdif_tx_pin: spdif-tx-pin {
 				pins = "PH7";
 				function = "spdif";
@@ -653,10 +689,8 @@
 			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
 			clock-names = "apb", "spdif";
 			resets = <&ccu RST_BUS_SPDIF>;
-			dmas = <&dma 2>;
-			dma-names = "tx";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spdif_tx_pin>;
+			dmas = <&dma 2>, <&dma 2>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -1072,9 +1106,55 @@
 		};
 
 		gpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
+			polling-delay-passive = <1000>;
+			polling-delay = <2000>;
 			thermal-sensors = <&ths 1>;
+
+			trips {
+				gpu_alert0: gpu-alert-0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert1: gpu-alert-1 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert2: gpu-alert-2 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				// Forbid the GPU to go over 756MHz
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu 1 THERMAL_NO_LIMIT>;
+				};
+
+				// Forbid the GPU to go over 624MHz
+				map1 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&gpu 2 THERMAL_NO_LIMIT>;
+				};
+
+				// Forbid the GPU to go over 576MHz
+				map2 {
+					trip = <&gpu_alert2>;
+					cooling-device = <&gpu 3 THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
new file mode 100644
index 000000000000..4bfb52609c94
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616-bigtreetech-cb1.dtsi"
+
+/ {
+	model = "BigTreeTech CB1";
+	compatible = "bigtreetech,cb1-manta", "bigtreetech,cb1", "allwinner,sun50i-h616";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
new file mode 100644
index 000000000000..bebfeb2a337a
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		ethernet0 = &rtl8189ftv;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+		};
+	};
+
+	reg_vcc5v: regulator-vcc5v {
+		/* board wide 5V supply from carrier boards */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc33_wifi: vcc33-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33-wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	reg_vcc_wifi_io: vcc-wifi-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-wifi-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc33_wifi>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dldo1>;
+	/* Card detection pin is not connected */
+	broken-cd;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc33_wifi>;
+	vqmmc-supply = <&reg_vcc_wifi_io>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	mmc-ddr-1_8v;
+	status = "okay";
+
+	rtl8189ftv: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313a: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		regulators {
+			reg_dcdc1: dcdc1 {
+				regulator-name = "vdd-gpu-sys";
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-always-on;
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-name = "vdd-cpu";
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-ramp-delay = <200>;
+				regulator-always-on;
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-name = "vcc-dram";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			reg_aldo1: aldo1 {
+				regulator-name = "vcc-1v8-pll";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			reg_dldo1: dldo1 {
+				regulator-name = "vcc-3v3-io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts
new file mode 100644
index 000000000000..ff84a3794470
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Martin Botka <martin@biqu3d.com>.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616-bigtreetech-cb1.dtsi"
+
+/ {
+	model = "BigTreeTech Pi";
+	compatible = "bigtreetech,pi", "allwinner,sun50i-h616";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi
new file mode 100644
index 000000000000..dd10aaf472b6
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2023 Martin Botka <martin@somainline.org>
+
+/ {
+	cpu_opp_table: opp-table-cpu {
+		compatible = "allwinner,sun50i-h616-operating-points";
+		nvmem-cells = <&cpu_speed_grade>;
+		opp-shared;
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x3f>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x12>;
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x2d>;
+		};
+
+		opp-792000000 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-microvolt-speed1 = <900000>;
+			opp-microvolt-speed4 = <940000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x12>;
+		};
+
+		opp-936000000 {
+			opp-hz = /bits/ 64 <936000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x0d>;
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt-speed0 = <950000>;
+			opp-microvolt-speed1 = <940000>;
+			opp-microvolt-speed2 = <950000>;
+			opp-microvolt-speed3 = <950000>;
+			opp-microvolt-speed4 = <1020000>;
+			opp-microvolt-speed5 = <900000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x3f>;
+		};
+
+		opp-1032000000 {
+			opp-hz = /bits/ 64 <1032000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x20>;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt-speed0 = <1000000>;
+			opp-microvolt-speed2 = <1000000>;
+			opp-microvolt-speed3 = <1000000>;
+			opp-microvolt-speed5 = <950000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x2d>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt-speed0 = <1050000>;
+			opp-microvolt-speed1 = <1020000>;
+			opp-microvolt-speed2 = <1050000>;
+			opp-microvolt-speed3 = <1050000>;
+			opp-microvolt-speed4 = <1100000>;
+			opp-microvolt-speed5 = <1020000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x3f>;
+		};
+
+		opp-1320000000 {
+			opp-hz = /bits/ 64 <1320000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x1d>;
+		};
+
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x2d>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt-speed1 = <1100000>;
+			opp-microvolt-speed3 = <1100000>;
+			opp-microvolt-speed5 = <1160000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x2a>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
new file mode 100644
index 000000000000..a8644fb52b04
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Arm Ltd.
+ *
+ * DT nodes common between Orange Pi Zero 2 and Orange Pi Zero 3.
+ * Excludes PMIC nodes and properties, since they are different between the two.
+ */
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
+			default-state = "on";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		enable-active-high;
+		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+/* USB 2 & 3 are on headers only. */
+
+&emac0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-handle = <&ext_rgmii_phy>;
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&mdio0 {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&spi0  {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
index 02893f3ac99d..f2e3300e078a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
@@ -1,79 +1,35 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2020 Arm Ltd.
  */
 
 /dts-v1/;
 
-#include "sun50i-h616.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/leds/common.h>
+#include "sun50i-h616-orangepi-zero.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
 
 / {
 	model = "OrangePi Zero2";
 	compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";
+};
 
-	aliases {
-		ethernet0 = &emac0;
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-0 {
-			function = LED_FUNCTION_POWER;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
-			default-state = "on";
-		};
-
-		led-1 {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
-		};
-	};
-
-	reg_vcc5v: vcc5v {
-		/* board wide 5V supply directly from the USB-C socket */
-		compatible = "regulator-fixed";
-		regulator-name = "vcc-5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
 };
 
 &emac0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ext_rgmii_pins>;
-	phy-mode = "rgmii";
-	phy-handle = <&ext_rgmii_phy>;
-	phy-supply = <&reg_dcdce>;
 	allwinner,rx-delay-ps = <3100>;
 	allwinner,tx-delay-ps = <700>;
-	status = "okay";
+	phy-mode = "rgmii";
+	phy-supply = <&reg_dcdce>;
 };
 
-&mdio0 {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
+&gpu {
+	mali-supply = <&reg_dcdcc>;
 };
 
 &mmc0 {
 	vmmc-supply = <&reg_dcdce>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
-	bus-width = <4>;
-	status = "okay";
 };
 
 &r_rsb {
@@ -191,23 +147,3 @@
 	vcc-ph-supply = <&reg_aldo1>;
 	vcc-pi-supply = <&reg_aldo1>;
 };
-
-&spi0  {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_ph_pins>;
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
index 6619db34714a..085f3e4e8eaa 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2021 Arm Ltd.
  */
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -32,6 +33,28 @@
 	};
 };
 
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
 &ir {
 	status = "okay";
 };
@@ -39,6 +62,7 @@
 &mmc0 {
 	vmmc-supply = <&reg_dcdce>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	disable-wp;
 	bus-width = <4>;
 	status = "okay";
 };
@@ -54,6 +78,14 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -175,3 +207,12 @@
 	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
+
+&usbotg {
+	dr_mode = "host";	/* USB A type receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
index 622a1f7d1641..ceedae9e399b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/reset/sun50i-h616-ccu.h>
 #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -25,6 +26,14 @@
 			reg = <0>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
+			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu1: cpu@1 {
@@ -33,6 +42,14 @@
 			reg = <1>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
+			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu2: cpu@2 {
@@ -41,6 +58,14 @@
 			reg = <2>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
+			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu3: cpu@3 {
@@ -49,6 +74,23 @@
 			reg = <3>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
+			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
 		};
 	};
 
@@ -108,6 +150,31 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x0 0x40000000>;
 
+		gpu: gpu@1800000 {
+			compatible = "allwinner,sun50i-h616-mali",
+				     "arm,mali-bifrost";
+			reg = <0x1800000 0x40000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&ccu CLK_GPU0>, <&ccu CLK_BUS_GPU>;
+			clock-names = "core", "bus";
+			power-domains = <&prcm_ppu 2>;
+			resets = <&ccu RST_BUS_GPU>;
+			status = "disabled";
+		};
+
+		crypto: crypto@1904000 {
+			compatible = "allwinner,sun50i-h616-crypto";
+			reg = <0x01904000 0x800>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>,
+				 <&ccu CLK_MBUS_CE>, <&rtc CLK_IOSC>;
+			clock-names = "bus", "mod", "ram", "trng";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
 		syscon: syscon@3000000 {
 			compatible = "allwinner,sun50i-h616-system-control";
 			reg = <0x03000000 0x1000>;
@@ -133,6 +200,34 @@
 			#reset-cells = <1>;
 		};
 
+		dma: dma-controller@3002000 {
+			compatible = "allwinner,sun50i-h616-dma",
+				     "allwinner,sun50i-a100-dma";
+			reg = <0x03002000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+			clock-names = "bus", "mbus";
+			dma-channels = <16>;
+			dma-requests = <49>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		sid: efuse@3006000 {
+			compatible = "allwinner,sun50i-h616-sid", "allwinner,sun50i-a64-sid";
+			reg = <0x03006000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@14 {
+				reg = <0x14 0x8>;
+			};
+
+			cpu_speed_grade: cpu-speed-grade@0 {
+				reg = <0x0 2>;
+			};
+		};
+
 		watchdog: watchdog@30090a0 {
 			compatible = "allwinner,sun50i-h616-wdt",
 				     "allwinner,sun6i-a31-wdt";
@@ -169,7 +264,7 @@
 			};
 
 			i2c0_pins: i2c0-pins {
-				pins = "PI6", "PI7";
+				pins = "PI5", "PI6";
 				function = "i2c0";
 			};
 
@@ -233,6 +328,11 @@
 				function = "spi1";
 			};
 
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PH4";
+				function = "spdif";
+			};
+
 			uart0_ph_pins: uart0-ph-pins {
 				pins = "PH0", "PH1";
 				function = "uart0";
@@ -249,6 +349,12 @@
 				pins = "PG8", "PG9";
 				function = "uart1";
 			};
+
+			/omit-if-no-ref/
+			x32clk_fanout_pin: x32clk-fanout-pin {
+				pins = "PG10";
+				function = "clock";
+			};
 		};
 
 		gic: interrupt-controller@3021000 {
@@ -262,6 +368,15 @@
 			#interrupt-cells = <3>;
 		};
 
+		iommu: iommu@30f0000 {
+			compatible = "allwinner,sun50i-h616-iommu";
+			reg = <0x030f0000 0x10000>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_IOMMU>;
+			resets = <&ccu RST_BUS_IOMMU>;
+			#iommu-cells = <1>;
+		};
+
 		mmc0: mmc@4020000 {
 			compatible = "allwinner,sun50i-h616-mmc",
 				     "allwinner,sun50i-a100-mmc";
@@ -332,6 +447,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART0>;
+			dmas = <&dma 14>, <&dma 14>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
@@ -343,6 +460,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART1>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART1>;
 			status = "disabled";
 		};
@@ -354,6 +473,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART2>;
+			dmas = <&dma 16>, <&dma 16>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART2>;
 			status = "disabled";
 		};
@@ -365,6 +486,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART3>;
+			dmas = <&dma 17>, <&dma 17>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART3>;
 			status = "disabled";
 		};
@@ -376,6 +499,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART4>;
+			dmas = <&dma 18>, <&dma 18>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART4>;
 			status = "disabled";
 		};
@@ -387,6 +512,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART5>;
+			dmas = <&dma 19>, <&dma 19>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART5>;
 			status = "disabled";
 		};
@@ -398,6 +525,8 @@
 			reg = <0x05002000 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C0>;
+			dmas = <&dma 43>, <&dma 43>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_I2C0>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c0_pins>;
@@ -413,6 +542,8 @@
 			reg = <0x05002400 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C1>;
+			dmas = <&dma 44>, <&dma 44>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_I2C1>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -426,6 +557,8 @@
 			reg = <0x05002800 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C2>;
+			dmas = <&dma 45>, <&dma 45>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_I2C2>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -439,6 +572,8 @@
 			reg = <0x05002c00 0x400>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C3>;
+			dmas = <&dma 46>, <&dma 46>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_I2C3>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -452,6 +587,8 @@
 			reg = <0x05003000 0x400>;
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C4>;
+			dmas = <&dma 47>, <&dma 47>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_I2C4>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -465,6 +602,8 @@
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_SPI0>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -478,6 +617,8 @@
 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_SPI1>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -504,6 +645,229 @@
 			};
 		};
 
+		gpadc: adc@5070000 {
+			compatible = "allwinner,sun50i-h616-gpadc",
+				     "allwinner,sun20i-d1-gpadc";
+			reg = <0x05070000 0x400>;
+			clocks = <&ccu CLK_BUS_GPADC>;
+			resets = <&ccu RST_BUS_GPADC>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#io-channel-cells = <1>;
+		};
+
+		ths: thermal-sensor@5070400 {
+			compatible = "allwinner,sun50i-h616-ths";
+			reg = <0x05070400 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			allwinner,sram = <&syscon>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		lradc: lradc@5070800 {
+			compatible = "allwinner,sun50i-h616-lradc",
+				     "allwinner,sun50i-r329-lradc";
+			reg = <0x05070800 0x400>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_KEYADC>;
+			resets = <&ccu RST_BUS_KEYADC>;
+			status = "disabled";
+		};
+
+		spdif: spdif@5093000 {
+			compatible = "allwinner,sun50i-h616-spdif";
+			reg = <0x05093000 0x400>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			resets = <&ccu RST_BUS_SPDIF>;
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		codec: codec@5096000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-h616-codec";
+			reg = <0x05096000 0x31c>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_AUDIO_CODEC>,
+				 <&ccu CLK_AUDIO_CODEC_1X>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_AUDIO_CODEC>;
+			dmas = <&dma 6>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		usbotg: usb@5100000 {
+			compatible = "allwinner,sun50i-h616-musb",
+				     "allwinner,sun8i-h3-musb";
+			reg = <0x05100000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@5100400 {
+			compatible = "allwinner,sun50i-h616-usb-phy";
+			reg = <0x05100400 0x24>,
+			      <0x05101800 0x14>,
+			      <0x05200800 0x14>,
+			      <0x05310800 0x14>,
+			      <0x05311800 0x14>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2",
+				    "pmu3";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>,
+				 <&ccu CLK_USB_PHY3>,
+				 <&ccu CLK_BUS_EHCI2>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy",
+				      "usb3_phy",
+				      "pmu2_clk";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>,
+				 <&ccu RST_USB_PHY3>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset",
+				      "usb3_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@5101000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05101000 0x100>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@5101400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05101400 0x100>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@5200000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05200000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@5200400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05200400 0x100>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@5310000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05310000 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_BUS_EHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>,
+				 <&ccu RST_BUS_EHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@5310400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05310400 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci3: usb@5311000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05311000 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_BUS_EHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>,
+				 <&ccu RST_BUS_EHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci3: usb@5311400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05311400 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
 		rtc: rtc@7000000 {
 			compatible = "allwinner,sun50i-h616-rtc";
 			reg = <0x07000000 0x400>;
@@ -525,6 +889,21 @@
 			#reset-cells = <1>;
 		};
 
+		prcm_ppu: power-controller@7010250 {
+			compatible = "allwinner,sun50i-h616-prcm-ppu";
+			reg = <0x07010250 0x10>;
+			#power-domain-cells = <1>;
+		};
+
+		nmi_intc: interrupt-controller@7010320 {
+			compatible = "allwinner,sun50i-h616-nmi",
+				     "allwinner,sun9i-a80-nmi";
+			reg = <0x07010320 0xc>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		r_pio: pinctrl@7022000 {
 			compatible = "allwinner,sun50i-h616-r-pinctrl";
 			reg = <0x07022000 0x400>;
@@ -567,7 +946,11 @@
 			reg = <0x07081400 0x400>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&r_ccu CLK_R_APB2_I2C>;
+			dmas = <&dma 48>, <&dma 48>;
+			dma-names = "rx", "tx";
 			resets = <&r_ccu RST_R_APB2_I2C>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -588,4 +971,74 @@
 			#size-cells = <0>;
 		};
 	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <500>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths 2>;
+			sustainable-power = <1000>;
+
+			trips {
+				cpu_threshold: cpu-trip-0 {
+					temperature = <60000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+				cpu_target: cpu-trip-1 {
+					temperature = <70000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+				cpu_critical: cpu-trip-2 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <500>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths 0>;
+			sustainable-power = <1100>;
+
+			trips {
+				gpu_temp_critical: gpu-trip-0 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+		};
+
+		ve-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+
+			trips {
+				ve_temp_critical: ve-trip-0 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 3>;
+
+			trips {
+				ddr_temp_critical: ddr-trip-0 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
new file mode 100644
index 000000000000..3f416d129b72
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) Jisheng Zhang <jszhang@kernel.org>
+ */
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-1v8-pll";
+			};
+
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-io";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dldo1>;
+	vcc-pf-supply = <&reg_dldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+	vcc-ph-supply = <&reg_dldo1>;
+	vcc-pi-supply = <&reg_dldo1>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-longanpi-3h.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-longanpi-3h.dts
new file mode 100644
index 000000000000..16c68177ff69
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-longanpi-3h.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) Jisheng Zhang <jszhang@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h618-longan-module-3h.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Sipeed Longan Pi 3H";
+	compatible = "sipeed,longan-pi-3h", "sipeed,longan-module-3h", "allwinner,sun50i-h618";
+
+	aliases {
+		ethernet0 = &emac0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&pio 6 2 GPIO_ACTIVE_LOW>; /* PG2 */
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&pio 6 4 GPIO_ACTIVE_LOW>; /* PG4 */
+		};
+	};
+
+	reg_vcc5v: regulator-vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc5v>;
+	};
+};
+
+&axp313 {
+	vin1-supply = <&reg_vcc5v>;
+	vin2-supply = <&reg_vcc5v>;
+	vin3-supply = <&reg_vcc5v>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+/* WiFi & BT combo module is connected to this Host */
+&ehci3 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&emac0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	allwinner,rx-delay-ps = <3100>;
+	allwinner,tx-delay-ps = <700>;
+	phy-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&mdio0 {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	disable-wp;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;	/* PF6 */
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v>;
+	usb2_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
new file mode 100644
index 000000000000..b340bbcb710d
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "OrangePi Zero 2W";
+	compatible = "xunlong,orangepi-zero2w", "allwinner,sun50i-h618";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		/* SY8089 DC/DC converter */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+		regulator-always-on;
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+/* USB 2 & 3 are on the FPC connector (or the exansion board) */
+
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
+&mmc0 {
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dldo1>;
+	vcc-pf-supply = <&reg_dldo1>;	/* internally via VCC-IO */
+	vcc-pg-supply = <&reg_aldo1>;
+	vcc-ph-supply = <&reg_dldo1>;	/* internally via VCC-IO */
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>;	/* PC9 */
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies VCC-PLL and DRAM */
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Supplies VCC-IO, so needs to be always on. */
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&spi0  {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
new file mode 100644
index 000000000000..c51d4d9120de
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616-orangepi-zero.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+/ {
+	model = "OrangePi Zero3";
+	compatible = "xunlong,orangepi-zero3", "allwinner,sun50i-h618";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&emac0 {
+	allwinner,tx-delay-ps = <700>;
+	phy-mode = "rgmii-rxid";
+	phy-supply = <&reg_dldo1>;
+};
+
+&ext_rgmii_phy {
+	motorcomm,clk-out-frequency-hz = <125000000>;
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+};
+
+&mmc0 {
+	/*
+	 * The schematic shows the card detect pin wired up to PF6, via an
+	 * inverter, but it just doesn't work.
+	 */
+	broken-cd;
+	vmmc-supply = <&reg_dldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>;	/* PC9 */
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies VCC-PLL, so needs to be always on. */
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Supplies VCC-IO, so needs to be always on. */
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dldo1>;
+	vcc-pf-supply = <&reg_dldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+	vcc-ph-supply = <&reg_dldo1>;
+	vcc-pi-supply = <&reg_dldo1>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
new file mode 100644
index 000000000000..efe0faa252f5
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Transpeed 8K618-T";
+	compatible = "transpeed,8k618-t", "allwinner,sun50i-h618";
+
+	aliases {
+		ethernet1 = &sdio_wifi;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		/* discrete 3.3V regulator */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&x32clk_fanout_pin>;
+		pinctrl-names = "default";
+		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dldo1>;
+	cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>;	/* PI16 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-1v8-pll";
+			};
+
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-io-mmc";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1360000>;
+				regulator-max-microvolt = <1360000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&pio {
+	vcc-pc-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_dldo1>;
+	vcc-ph-supply = <&reg_dldo1>;
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";	/* USB A type receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts
new file mode 100644
index 000000000000..eae56908b9b4
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2024 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Yuzuki Chameleon";
+	compatible = "yuzukihd,chameleon", "allwinner,sun50i-h618";
+
+	aliases {
+		ethernet1 = &sdio_wifi;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&x32clk_fanout_pin>;
+		pinctrl-names = "default";
+		reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>; /* PG11 */
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	disable-wp;
+	vmmc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 12 IRQ_TYPE_LEVEL_LOW>;  /* PG12 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	bus-width = <8>;
+	cap-mmc-hw-reset;
+	mmc-ddr-3_3v;
+	non-removable;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dldo1>;
+	vcc-pf-supply = <&reg_dldo1>;	/* via VCC_IO */
+	vcc-pg-supply = <&reg_dldo1>;
+	vcc-ph-supply = <&reg_dldo1>;	/* via VCC_IO */
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <2 2 IRQ_TYPE_LEVEL_LOW>;	/* PC2 */
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies VCC-PLL, so needs to be always on. */
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Supplies VCC-IO, so needs to be always on. */
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+/* Connected to the Bluetooth UART pins of the XR829 Wifi/BT chip. */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb1_vbus-supply = <&reg_vcc5v>;
+	usb2_vbus-supply = <&reg_vcc5v>;
+	usb3_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h64-remix-mini-pc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h64-remix-mini-pc.dts
new file mode 100644
index 000000000000..ce90327e1b2e
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h64-remix-mini-pc.dts
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2023 ARM Ltd.
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Remix Mini PC";
+	compatible = "jide,remix-mini-pc", "allwinner,sun50i-h64",
+		     "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet1 = &rtl8723bs;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	reg_vcc5v: regulator-5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+/* Connects to the AC200 chip */
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&i2c0_pins {
+	bias-pull-up;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_aldo1>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <8>;
+	non-removable;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_dcdc1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo4>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	/*
+	 * We cannot add that supply for now since it would create a circular
+	 * dependency between pinctrl, the regulator and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin5-supply = <&reg_vcc5v>;
+		vin6-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		dldoin-supply = <&reg_vcc5v>;
+		eldoin-supply = <&reg_vcc5v>;
+		fldoin-supply = <&reg_vcc5v>;
+		drivevbus-supply = <&reg_vcc5v>;
+		ips-supply = <&reg_vcc5v>;
+
+		status = "okay";
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+/* Deviates from the reset default of 1.1V. */
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo2 {
+	/* Specifying R_PIO consumer would create circular dependency. */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+/* AC200 power supply */
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ave-33";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-cpvdd-dram-emmc";
+};
+
+/* Supplies the arisc management core, needed by TF-A to power off cores. */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dcdc1>;
+};
+
+&sound {
+	simple-audio-card,aux-devs = <&codec_analog>;
+	simple-audio-card,widgets = "Microphone", "Microphone Jack",
+				    "Headphone", "Headphone Jack";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"Headphone Jack", "HP",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"MIC2", "Microphone Jack";
+	status = "okay";
+};
+
+/* On the (unpopulated) UART pads. */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723bs-bt";
+		enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		max-speed = <1500000>;
+	};
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
new file mode 100644
index 000000000000..1a750c5f6fac
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Anbernic RG35XX 2024";
+	chassis-type = "handset";
+	compatible = "anbernic,rg35xx-2024", "allwinner,sun50i-h700";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		constant-charge-current-max-microamp = <1024000>;
+		voltage-max-design-microvolt = <4200000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys_gamepad: gpio-keys-gamepad {
+		compatible = "gpio-keys";
+
+		button-a {
+			label = "Action-Pad A";
+			gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			label = "Action-Pad B";
+			gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			label = "D-Pad Down";
+			gpios = <&pio 4 0 GPIO_ACTIVE_LOW>; /* PE0 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-l1 {
+			label = "Key L1";
+			gpios = <&pio 0 10 GPIO_ACTIVE_LOW>; /* PA10 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_TL>;
+		};
+
+		button-l2 {
+			label = "Key L2";
+			gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_TL2>;
+		};
+
+		button-left {
+			label = "D-Pad left";
+			gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-menu {
+			label = "Key Menu";
+			gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_MODE>;
+		};
+
+		button-r1 {
+			label = "Key R1";
+			gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_TR>;
+		};
+
+		button-r2 {
+			label = "Key R2";
+			gpios = <&pio 0 7 GPIO_ACTIVE_LOW>; /* PA7 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_TR2>;
+		};
+
+		button-right {
+			label = "D-Pad Right";
+			gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-select {
+			label = "Key Select";
+			gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_SELECT>;
+		};
+		button-start {
+			label = "Key Start";
+			gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_START>;
+		};
+
+		button-up {
+			label = "D-Pad Up";
+			gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			label = "Action-Pad X";
+			gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			label = "Action Pad Y";
+			gpios = <&pio 0 2 GPIO_ACTIVE_LOW>; /* PA2 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_WEST>;
+		};
+	};
+
+	gpio-keys-volume {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-vol-up {
+			label = "Key Volume Up";
+			gpios = <&pio 4 1 GPIO_ACTIVE_LOW>; /* PE1 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-vol-down {
+			label = "Key Volume Down";
+			gpios = <&pio 4 2 GPIO_ACTIVE_LOW>; /* PE2 */
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 8 12 GPIO_ACTIVE_HIGH>; /* PI12 */
+			default-state = "on";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>; /* PI11 */
+		};
+	};
+
+	reg_vcc5v: regulator-vcc5v { /* USB-C power input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&codec {
+	/* Both speakers and headphone jack connected to 74HC4052D analog mux*/
+	allwinner,audio-routing = "Speaker", "LINEOUT",
+				  "Headphone", "LINEOUT";
+	allwinner,pa-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; // PI5
+	hp-det-gpios = <&pio 8 3 GPIO_ACTIVE_HIGH>; // PI3
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc1>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo3>;
+	disable-wp;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;  /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pa-supply = <&reg_cldo3>;
+	vcc-pc-supply = <&reg_cldo3>;
+	vcc-pe-supply = <&reg_cldo3>;
+	vcc-pf-supply = <&reg_cldo3>;
+	vcc-pg-supply = <&reg_aldo4>;
+	vcc-ph-supply = <&reg_cldo3>;
+	vcc-pi-supply = <&reg_cldo3>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp717: pmic@34 {
+		compatible = "x-powers,axp717";
+		reg = <0x34>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+
+		axp_adc: adc {
+			compatible = "x-powers,axp717-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery_power: battery-power {
+			compatible = "x-powers,axp717-battery-power-supply";
+			monitored-battery = <&battery>;
+			x-powers,no-thermistor;
+		};
+
+		regulators {
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <940000>;
+				regulator-max-microvolt = <940000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_aldo1: aldo1 {
+				/* 1.8v - unused */
+			};
+
+			reg_aldo2: aldo2 {
+				/* 1.8v - unused */
+			};
+
+			reg_aldo3: aldo3 {
+				/* 1.8v - unused */
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				/* 1.8v - unused */
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll";
+			};
+
+			reg_bldo3: bldo3 {
+				/* 2.8v - unused */
+			};
+
+			reg_bldo4: bldo4 {
+				/* 1.2v - unused */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-spkr-amp";
+			};
+
+			reg_cldo2: cldo2 {
+				/* 3.3v - unused */
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io";
+			};
+
+			reg_cldo4: cldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_boost: boost {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5200000>;
+				regulator-name = "boost";
+			};
+
+			/*
+			 * Regulator function is unknown, but reading
+			 * GPIO values in bootloader is inconsistent
+			 * on reboot if this is disabled. Setting to
+			 * default value from regulator OTP mem.
+			 */
+			reg_cpusldo: cpusldo {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+			};
+		};
+
+		usb_power: usb-power {
+			compatible = "x-powers,axp717-usb-power-supply";
+			input-current-limit-microamp = <1500000>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+/* the AXP717 has USB type-C role switch functionality, not yet described by the binding */
+&usbotg {
+	dr_mode = "peripheral";   /* USB type-C receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
new file mode 100644
index 000000000000..bef4d107482f
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ * Copyright (C) 2024 Chris Morgan <macroalpha82@gmail.com>.
+ */
+
+#include "sun50i-h700-anbernic-rg35xx-plus.dts"
+
+/ {
+	model = "Anbernic RG35XX H";
+	compatible = "anbernic,rg35xx-h", "allwinner,sun50i-h700";
+
+	adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&adc_mux 0>,
+			      <&adc_mux 1>,
+			      <&adc_mux 2>,
+			      <&adc_mux 3>;
+		pinctrl-0 = <&joy_mux_pin>;
+		pinctrl-names = "default";
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <4096 0>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <0 4096>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <0 4096>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <4096 0>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	adc_mux: adc-mux {
+		compatible = "io-channel-mux";
+		channels = "left_x", "left_y", "right_x", "right_y";
+		#io-channel-cells = <1>;
+		io-channels = <&gpadc 0>;
+		io-channel-names = "parent";
+		mux-controls = <&gpio_mux>;
+		settle-time-us = <100>;
+	};
+
+	gpio_mux: mux-controller {
+		compatible = "gpio-mux";
+		mux-gpios = <&pio 8 1 GPIO_ACTIVE_LOW>,
+			    <&pio 8 2 GPIO_ACTIVE_LOW>;
+		#mux-control-cells = <0>;
+	};
+
+	reg_vcc3v8_usb: regulator-vcc3v8-usb {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&pio 4 5 GPIO_ACTIVE_HIGH>; /* PE5 */
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-name = "vcc3v8-usb";
+	};
+
+	reg_vcc5v0_usb: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&pio 8 7 GPIO_ACTIVE_HIGH>; /* PI7 */
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0-usb";
+		vin-supply = <&reg_vcc3v8_usb>;
+	};
+};
+
+&gpadc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	channel@0 {
+		reg = <0>;
+	};
+};
+
+&gpio_keys_gamepad {
+	button-thumbl {
+		label = "GPIO Thumb Left";
+		gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+		linux,input-type = <EV_KEY>;
+		linux,code = <BTN_THUMBL>;
+	};
+
+	button-thumbr {
+		label = "GPIO Thumb Right";
+		gpios = <&pio 4 9 GPIO_ACTIVE_LOW>; /* PE9 */
+		linux,input-type = <EV_KEY>;
+		linux,code = <BTN_THUMBR>;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	joy_mux_pin: joy-mux-pin {
+		pins = "PI0";
+		function = "gpio_out";
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0_usb>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts
new file mode 100644
index 000000000000..60a8e4922103
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ */
+
+#include "sun50i-h700-anbernic-rg35xx-2024.dts"
+
+/ {
+	model = "Anbernic RG35XX Plus";
+	compatible = "anbernic,rg35xx-plus", "allwinner,sun50i-h700";
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&x32clk_fanout_pin>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+	};
+};
+
+/* SDIO WiFi RTL8821CS */
+&mmc1 {
+	vmmc-supply = <&reg_cldo4>;
+	vqmmc-supply = <&reg_aldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 15 IRQ_TYPE_LEVEL_LOW>; /* PG15 */
+		interrupt-names = "host-wake";
+	};
+};
+
+/* Bluetooth RTL8821CS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */
+		enable-gpios = <&pio 6 19 GPIO_ACTIVE_HIGH>; /* PG19 */
+		host-wake-gpios = <&pio 6 16 GPIO_ACTIVE_HIGH>; /* PG16 */
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-sp.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-sp.dts
new file mode 100644
index 000000000000..0cf16dc903cd
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-sp.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ * Copyright (C) 2024 Chris Morgan <macroalpha82@gmail.com>.
+ */
+
+#include <dt-bindings/input/gpio-keys.h>
+#include "sun50i-h700-anbernic-rg35xx-plus.dts"
+
+/ {
+	model = "Anbernic RG35XX SP";
+	compatible = "anbernic,rg35xx-sp", "allwinner,sun50i-h700";
+
+	gpio-keys-lid {
+		compatible = "gpio-keys";
+
+		lid-switch {
+			label = "Lid Switch";
+			gpios = <&pio 4 7 GPIO_ACTIVE_LOW>; /* PE7 */
+			linux,can-disable;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+	};
+};
+
+&r_i2c {
+	rtc_ext: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
new file mode 100644
index 000000000000..7b36c47a3a13
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -0,0 +1,735 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2023-2024 Arm Ltd.
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun55i-a523-ccu.h>
+#include <dt-bindings/clock/sun55i-a523-mcu-ccu.h>
+#include <dt-bindings/clock/sun55i-a523-r-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-mcu-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-r-ccu.h>
+#include <dt-bindings/power/allwinner,sun55i-a523-ppu.h>
+#include <dt-bindings/power/allwinner,sun55i-a523-pck-600.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x000>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x300>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@400 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x400>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@500 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x500>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@600 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x600>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@700 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x700>;
+			enable-method = "psci";
+		};
+	};
+
+	osc24M: osc24M-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24M";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		arm,no-tick-in-suspend;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>;
+
+		gpu: gpu@1800000 {
+			compatible = "allwinner,sun55i-a523-mali",
+				     "arm,mali-valhall-jm";
+			reg = <0x1800000 0x10000>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
+			clock-names = "core", "bus";
+			power-domains = <&pck600 PD_GPU>;
+			resets = <&ccu RST_BUS_GPU>;
+			status = "disabled";
+		};
+
+		pio: pinctrl@2000000 {
+			compatible = "allwinner,sun55i-a523-pinctrl";
+			reg = <0x2000000 0x800>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0" ,"PF1", "PF2", "PF3", "PF4", "PF5";
+				allwinner,pinmux = <2>;
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc1_pins: mmc1-pins {
+				pins = "PG0" ,"PG1", "PG2", "PG3", "PG4", "PG5";
+				allwinner,pinmux = <2>;
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC0", "PC1" ,"PC5", "PC6", "PC8",
+				       "PC9", "PC10", "PC11", "PC13", "PC14",
+				       "PC15", "PC16";
+				allwinner,pinmux = <3>;
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			rgmii0_pins: rgmii0-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH9", "PH10",
+				       "PH14", "PH15", "PH16", "PH17", "PH18";
+				allwinner,pinmux = <5>;
+				function = "gmac0";
+				drive-strength = <40>;
+				bias-disable;
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB9", "PB10";
+				allwinner,pinmux = <2>;
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+				allwinner,pinmux = <2>;
+			};
+
+			/omit-if-no-ref/
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+				allwinner,pinmux = <2>;
+			};
+		};
+
+		ccu: clock-controller@2001000 {
+			compatible = "allwinner,sun55i-a523-ccu";
+			reg = <0x02001000 0x1000>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>, <&rtc CLK_OSC32K_FANOUT>;
+			clock-names = "hosc", "losc",
+				      "iosc", "losc-fanout";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		wdt: watchdog@2050000 {
+			compatible = "allwinner,sun55i-a523-wdt";
+			reg = <0x2050000 0x20>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			status = "okay";
+		};
+
+		uart0: serial@2500000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500000 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@2500400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500400 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@2500800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500800 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@2500c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500c00 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@2501000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501000 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@2501400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501400 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@2501800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501800 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART6>;
+			resets = <&ccu RST_BUS_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@2501c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501c00 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART7>;
+			resets = <&ccu RST_BUS_UART7>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2502000 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502000 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@2502400 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502400 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@2502800 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502800 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@2502c00 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502c00 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@2503000 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2503000 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5: i2c@2503400 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2503400 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C5>;
+			resets = <&ccu RST_BUS_I2C5>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		syscon: syscon@3000000 {
+			compatible = "allwinner,sun55i-a523-system-control",
+				     "allwinner,sun50i-a64-system-control";
+			reg = <0x03000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+		};
+
+		sid: efuse@3006000 {
+			compatible = "allwinner,sun55i-a523-sid",
+				     "allwinner,sun50i-a64-sid";
+			reg = <0x03006000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		gic: interrupt-controller@3400000 {
+			compatible = "arm,gic-v3";
+			#address-cells = <1>;
+			#interrupt-cells = <3>;
+			#size-cells = <1>;
+			ranges;
+			interrupt-controller;
+			reg = <0x3400000 0x10000>,
+			      <0x3460000 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			dma-noncoherent;
+
+			its: msi-controller@3440000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x3440000 0x20000>;
+				msi-controller;
+				#msi-cells = <1>;
+				dma-noncoherent;
+			};
+		};
+
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun55i-a523-mmc",
+				     "allwinner,sun20i-d1-mmc";
+			reg = <0x04020000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun55i-a523-mmc",
+				     "allwinner,sun20i-d1-mmc";
+			reg = <0x04021000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun55i-a523-mmc",
+				     "allwinner,sun20i-d1-mmc";
+			reg = <0x04022000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			status = "disabled";
+
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@4100000 {
+			compatible = "allwinner,sun55i-a523-musb",
+				     "allwinner,sun8i-a33-musb";
+			reg = <0x4100000 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			extcon = <&usbphy 0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy: phy@4100400 {
+			compatible = "allwinner,sun55i-a523-usb-phy",
+				     "allwinner,sun20i-d1-usb-phy";
+			reg = <0x4100400 0x100>,
+			      <0x4101800 0x100>,
+			      <0x4200800 0x100>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1";
+			clocks = <&osc24M>,
+				 <&osc24M>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@4101000 {
+			compatible = "allwinner,sun55i-a523-ehci",
+				     "generic-ehci";
+			reg = <0x4101000 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@4101400 {
+			compatible = "allwinner,sun55i-a523-ohci",
+				     "generic-ohci";
+			reg = <0x4101400 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@4200000 {
+			compatible = "allwinner,sun55i-a523-ehci",
+				     "generic-ehci";
+			reg = <0x4200000 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@4200400 {
+			compatible = "allwinner,sun55i-a523-ohci",
+				     "generic-ohci";
+			reg = <0x4200400 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		gmac0: ethernet@4500000 {
+			compatible = "allwinner,sun55i-a523-gmac0",
+				     "allwinner,sun50i-a64-emac";
+			reg = <0x04500000 0x10000>;
+			clocks = <&ccu CLK_BUS_EMAC0>;
+			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC0>;
+			reset-names = "stmmaceth";
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rgmii0_pins>;
+			syscon = <&syscon>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		ppu: power-controller@7001400 {
+			compatible = "allwinner,sun55i-a523-ppu";
+			reg = <0x07001400 0x400>;
+			clocks = <&r_ccu CLK_BUS_R_PPU1>;
+			resets = <&r_ccu RST_BUS_R_PPU1>;
+			#power-domain-cells = <1>;
+		};
+
+		r_ccu: clock-controller@7010000 {
+			compatible = "allwinner,sun55i-a523-r-ccu";
+			reg = <0x7010000 0x250>;
+			clocks = <&osc24M>,
+				 <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_PERIPH0_200M>,
+				 <&ccu CLK_PLL_AUDIO0_4X>;
+			clock-names = "hosc",
+				      "losc",
+				      "iosc",
+				      "pll-periph",
+				      "pll-audio";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			assigned-clocks = <&r_ccu CLK_R_AHB>, <&r_ccu CLK_R_APB0>;
+			assigned-clock-rates = <200000000>, <100000000>;
+		};
+
+		nmi_intc: interrupt-controller@7010320 {
+			compatible = "allwinner,sun55i-a523-nmi";
+			reg = <0x07010320 0xc>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_pio: pinctrl@7022000 {
+			compatible = "allwinner,sun55i-a523-r-pinctrl";
+			reg = <0x7022000 0x800>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB0>,
+				 <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0" ,"PL1";
+				allwinner,pinmux = <2>;
+				function = "r_i2c0";
+			};
+		};
+
+		pck600: power-controller@7060000 {
+			compatible = "allwinner,sun55i-a523-pck-600";
+			reg = <0x07060000 0x8000>;
+			clocks = <&r_ccu CLK_BUS_R_PPU0>;
+			resets = <&r_ccu RST_BUS_R_PPU0>;
+			#power-domain-cells = <1>;
+		};
+
+		r_i2c0: i2c@7081400 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x07081400 0x400>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_BUS_R_I2C0>;
+			resets = <&r_ccu RST_BUS_R_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		rtc: rtc@7090000 {
+			compatible = "allwinner,sun55i-a523-rtc",
+				     "allwinner,sun50i-r329-rtc";
+			reg = <0x7090000 0x400>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_BUS_R_RTC>,
+				 <&osc24M>,
+				 <&r_ccu CLK_R_AHB>;
+			clock-names = "bus", "hosc", "ahb";
+			#clock-cells = <1>;
+		};
+
+		mcu_ccu: clock-controller@7102000 {
+			compatible = "allwinner,sun55i-a523-mcu-ccu";
+			reg = <0x7102000 0x200>;
+			clocks = <&osc24M>,
+				 <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_AUDIO0_4X>,
+				 <&ccu CLK_PLL_PERIPH0_300M>,
+				 <&ccu CLK_DSP>,
+				 <&ccu CLK_MBUS>,
+				 <&r_ccu CLK_R_AHB>,
+				 <&r_ccu CLK_R_APB0>;
+			clock-names = "hosc",
+				      "losc",
+				      "iosc",
+				      "pll-audio0-4x",
+				      "pll-periph0-300m",
+				      "dsp",
+				      "mbus",
+				      "r-ahb",
+				      "r-apb0";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		npu: npu@7122000 {
+			compatible = "vivante,gc";
+			reg = <0x07122000 0x1000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mcu_ccu CLK_BUS_MCU_NPU_ACLK>,
+				 <&ccu CLK_NPU>,
+				 <&mcu_ccu CLK_BUS_MCU_NPU_HCLK>;
+			clock-names = "bus", "core", "reg";
+			resets = <&mcu_ccu RST_BUS_MCU_NPU>;
+			power-domains = <&ppu PD_NPU>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
new file mode 100644
index 000000000000..f82a8d121697
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2025 Arm Ltd.
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Radxa Cubie A5E";
+	compatible = "radxa,cubie-a5e", "allwinner,sun55i-a527";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power-led {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		use-led {
+			function = LED_FUNCTION_ACTIVITY;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&axp717_adc 3>, /* vsys_v */
+			      <&axp717_adc 4>; /* pmic_temp */
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from the USB-C connector */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>;	/* PL8 */
+		enable-active-high;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_cldo3>;
+
+	allwinner,tx-delay-ps = <300>;
+	allwinner,rx-delay-ps = <400>;
+
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&mdio0 {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <150000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_cldo3>;
+	vcc-pe-supply = <&reg_aldo2>;
+	vcc-pf-supply = <&reg_cldo3>;	/* actually switchable */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_cldo3>;
+	vcc-pj-supply = <&reg_cldo4>;
+	vcc-pk-supply = <&reg_cldo1>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@34 {
+		compatible = "x-powers,axp717";
+		reg = <0x34>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		axp717_adc: adc {
+			compatible = "x-powers,axp717-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery-power {
+			compatible = "x-powers,axp717-battery-power-supply";
+			/* charger mode design but has no battery terminal */
+			status = "disabled";
+		};
+
+		regulators {
+			/* Supplies the "little" cluster (1.4 GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_aldo1: aldo1 {
+				/* not connected */
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_aldo3: aldo3 {
+				/* supplies the I2C pins for this PMIC */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-usb";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-iowifi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pm-lpddr4";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-mipi-cam";
+			};
+
+			reg_bldo4: bldo4 {
+				/* not connected */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pc-and-their-dog";
+			};
+
+			reg_cldo2: cldo2 {
+				/* not connected */
+			};
+
+			reg_cldo3: cldo3 {
+				/* IO, USB-2, 3V3, card, NAND, sensor, PI */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io-mmc-spi-ana";
+			};
+
+			reg_cldo4: cldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pj-phy";
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus";
+			};
+		};
+
+		usb-power {
+			compatible = "x-powers,axp717-usb-power-supply";
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			aldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-mipi-dsi";
+			};
+
+			dldo1 {
+				/* not connected */
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			/* RISC-V management core supply */
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-dnr";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_aldo3>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The USB-C port is the primary power supply, so in this configuration
+	 * relies on the other end of the USB cable to supply the VBUS power.
+	 * So use this port in peripheral mode.
+	 * It is possible to supply the board with the 5V pins on the GPIO
+	 * header, and since the DCIN_5V line is hardwired to the USB-C VBUS
+	 * pins, the port turns into a host port, unconditionally supplying
+	 * power. The dr_mode property should be changed to "host" here, if
+	 * users choose this setup.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+/*
+ * The schematic describes USB0_ID (PL10), measuring VBUS_5V, which looks to
+ * be always on. Also there is USB-VBUSDET (PL2), which is measuring the same
+ * VBUS_5V. There is also DCIN_DET, which measures DCIN_5V, so the power
+ * input rail.
+ * None of them seem to make any sense in relation to detecting USB devices
+ * or whether there is power provided via any USB pins: they would always
+ * report high, otherwise the system wouldn't be running.
+ * The AXP717C provides proper USB-C CC pin functionality, but the PMIC is
+ * not connected to those pins of the USB-C connector.
+ */
+&usbphy {
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb1_vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts b/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts
new file mode 100644
index 000000000000..a96927fbdadd
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2024 Arm Ltd.
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "X96Q Pro+";
+	compatible = "amediatech,x96q-pro-plus", "allwinner,sun55i-h728";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_osc32k: ext-osc32k-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from the barrel plug */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		/* 3.3V dummy supply for the SD card */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+		regulator-always-on;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_cldo3>;
+	vqmmc-supply = <&reg_cldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_dcdc4>;
+	vcc-pe-supply = <&reg_dcdc4>;
+	vcc-pf-supply = <&reg_cldo3>;	/* actually switchable */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_dcdc4>;
+	vcc-pj-supply = <&reg_dcdc4>;
+	vcc-pk-supply = <&reg_bldo3>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@34 {
+		compatible = "x-powers,axp717";
+		reg = <0x34>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies the "little" cluster (1.0(?) GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1360000>;
+				regulator-max-microvolt = <1360000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd-dcdc4";
+			};
+
+			reg_aldo1: aldo1 {
+				/* not connected */
+			};
+
+			reg_aldo2: aldo2 {
+				/* not connected */
+			};
+
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-aldo3";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-wifi-lvds";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dram-1v8";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "vcc-bldo3";
+			};
+
+			reg_bldo4: bldo4 {
+				/* not connected */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-codec-sd";
+			};
+
+			reg_cldo2: cldo2 {
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-codec-eth-sd";
+			};
+
+			reg_cldo4: cldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-eth-phy";
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus";
+			};
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			aldo1 {
+				/* not connected */
+			};
+
+			dldo1 {
+				/* not connected */
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-name = "vdd-dcdc3";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_aldo3>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/* USB0 is a USB-A receptacle, always powered, so force host mode. */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts
new file mode 100644
index 000000000000..1b054fa8ef74
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2024 Arm Ltd.
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Avaota A1";
+	compatible = "yuzukihd,avaota-a1", "allwinner,sun55i-t527";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_osc32k: ext-osc32k-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&axp717_adc 3>, /* vsys_v */
+			      <&axp717_adc 4>; /* pmic_temp */
+	};
+
+	reg_vcc12v: vcc12v {
+		/* DC input jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from the 12V->5V regulator */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc12v>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&pio 8 12 GPIO_ACTIVE_HIGH>;	/* PI12 */
+		enable-active-high;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dcdc4>;
+
+	allwinner,tx-delay-ps = <100>;
+	allwinner,rx-delay-ps = <300>;
+
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&mdio0 {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <150000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	bus-width = <8>;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&reg_cldo3>;
+	vqmmc-supply = <&reg_cldo1>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_dcdc4>;
+	vcc-pe-supply = <&reg_dcdc4>;
+	vcc-pf-supply = <&reg_cldo3>;	/* actually switchable */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_dcdc4>;
+	vcc-pj-supply = <&reg_dcdc4>;
+	vcc-pk-supply = <&reg_bldo3>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@35 {
+		compatible = "x-powers,axp717";
+		reg = <0x35>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		axp717_adc: adc {
+			compatible = "x-powers,axp717-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery-power {
+			compatible = "x-powers,axp717-battery-power-supply";
+			/* no battery; output used for dcdc4 instead */
+			status = "disabled";
+		};
+
+		regulators {
+			/* Supplies the "little" cluster (1.4 GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1160000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vdd-io";
+			};
+
+			reg_aldo1: aldo1 {
+				/* not connected */
+			};
+
+			reg_aldo2: aldo2 {
+				/* not connected */
+			};
+
+			reg_aldo3: aldo3 {
+				/* supplies the I2C pins for this PMIC */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-pm";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-wifi-lvds";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dram-1v8";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-cvp-pk-vid1v8";
+			};
+
+			reg_bldo4: bldo4 {
+				/* not connected */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pc";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io-mmc-spi-ana";
+			};
+
+			reg_cldo4: cldo4 {
+				/* not connected */
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus";
+			};
+		};
+
+		usb-power {
+			compatible = "x-powers,axp717-usb-power-supply";
+			/* 12V-5V buck converter can supply up to 5A */
+			input-current-limit-microamp = <3250000>;
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			aldo1 {
+				/* not connected */
+			};
+
+			dldo1 {
+				/* not connected */
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			/* Some RISC-V management core related voltage */
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-dnr";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_aldo3>;
+};
+
+&rtc {
+	clocks = <&r_ccu CLK_BUS_R_RTC>, <&osc24M>,
+		 <&r_ccu CLK_R_AHB>, <&ext_osc32k>;
+	clock-names = "bus", "hosc", "ahb", "ext-osc32k";
+	assigned-clocks = <&rtc CLK_OSC32K>;
+	assigned-clock-rates = <32768>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	 /*
+	  * The CC pins of the USB-C port have two pull-down resistors
+	  * connected to GND, which fixes this port to a peripheral role.
+	  * There is a regulator, controlled by a GPIO, to provide VBUS power
+	  * to the port, and a VBUSDET GPIO, to detect externally provided
+	  * power, but without the CC pins there is no real way to do a
+	  * runtime role detection.
+	  */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb_vbus>;
+	usb0_vbus_det-gpios = <&pio 8 13 GPIO_ACTIVE_HIGH>; /* PI13 */
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts
new file mode 100644
index 000000000000..39a4e194712a
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright (C) 2025 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "OrangePi 4A";
+	compatible = "xunlong,orangepi-4a", "allwinner,sun55i-t527";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_osc32k: ext-osc32k-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* PWM capable pin, but PWM isn't supported yet. */
+		led {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&axp717_adc 3>, /* vsys_v */
+			      <&axp717_adc 4>, /* pmic_temp */
+			      <&axp717_adc 7>; /* bkup_batt_v */
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 1 1 GPIO_ACTIVE_LOW>; /* PM1 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+
+	reg_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&r_pio 0 4 GPIO_ACTIVE_HIGH>;	/* PL4 */
+		enable-active-high;
+	};
+
+	reg_pcie_vcc3v3: regulator-pcie-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-pcie-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>;	/* PL8 */
+		enable-active-high;
+	};
+
+	reg_usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&r_pio 0 12 GPIO_ACTIVE_HIGH>;	/* PL12 */
+		enable-active-high;
+	};
+
+	reg_vcc5v: regulator-vcc5v {
+		/* board wide 5V supply from USB type-C port */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&reg_dldo1_323>;
+	vqmmc-supply = <&reg_bldo1>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	bus-width = <8>;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&reg_cldo3>;
+	vqmmc-supply = <&reg_cldo1>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_cldo3>;
+	vcc-pe-supply = <&reg_aldo2>;
+	vcc-pf-supply = <&reg_cldo3>;	/* VCC-IO for 3.3v; VCC-MCSI for 1.8v */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_cldo3>;
+	vcc-pj-supply = <&reg_cldo1>;
+	vcc-pk-supply = <&reg_cldo1>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@35 {
+		compatible = "x-powers,axp717";
+		reg = <0x35>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupts-extended = <&nmi_intc 0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		axp717_adc: adc {
+			compatible = "x-powers,axp717-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery-power {
+			compatible = "x-powers,axp717-battery-power-supply";
+			/* no battery; output used for dcdc4 instead */
+			status = "disabled";
+		};
+
+		regulators {
+			/* Supplies the "little" cluster (1.4 GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1160000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vcc-dram";
+			};
+
+			reg_dcdc4: dcdc4 {
+				/* feeds 3.3V pin on GPIO header */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vdd-io";
+			};
+
+			aldo1 {
+				/* not actually connected */
+				regulator-name = "avdd-csi";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_aldo3: aldo3 {
+				/* supplies the I2C pins for this PMIC */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-usb";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-wifi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pm-lpddr";
+			};
+
+			bldo3 {
+				/* not actually connected */
+				regulator-name = "afvcc-csi";
+			};
+
+			bldo4 {
+				/* not actually connected */
+				regulator-name = "dvdd-csi";
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-cvp-pc-lvds-mcsi-pk-efuse-pcie-edp-1v8";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3-csi";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io-mmc-nand-pd-pi-usb";
+			};
+
+			reg_cldo4: cldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-phy1-lcd";
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus-usb-0v9";
+			};
+		};
+
+		usb-power {
+			compatible = "x-powers,axp717-usb-power-supply";
+			input-current-limit-microamp = <3000000>;
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1_323: aldo1 {
+				/* less capable and shares load with dldo1 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_dldo1_323: dldo1 {
+				/* more capable and shares load with aldo1 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi2";
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			/* Some RISC-V management core related voltage */
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-dnr";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_bldo2>;
+};
+
+&rtc {
+	clocks = <&r_ccu CLK_BUS_R_RTC>, <&osc24M>,
+		 <&r_ccu CLK_R_AHB>, <&ext_osc32k>;
+	clock-names = "bus", "hosc", "ahb", "ext-osc32k";
+	assigned-clocks = <&rtc CLK_OSC32K>;
+	assigned-clock-rates = <32768>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_aldo1_323>;
+		vddio-supply = <&reg_bldo1>;
+		device-wakeup-gpios = <&r_pio 1 3 GPIO_ACTIVE_HIGH>; /* PM3 */
+		host-wakeup-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+		shutdown-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+	};
+};
+
+&usb_otg {
+	/*
+	 * The OTG controller is connected to one of the type-A ports.
+	 * There is a regulator, controlled by a GPIO, to provide VBUS power
+	 * to the port, and a VBUSDET GPIO, to detect externally provided
+	 * power. But without ID or CC pins there is no real way to do a
+	 * runtime role detection.
+	 */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_otg_vbus>;
+	usb0_vbus_det-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+	usb1_vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 14c220d87807..effd242f6bf7 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -34,6 +34,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&l2_shared>;
 			reg = <0x0>;
 		};
 
@@ -41,6 +42,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&l2_shared>;
 			reg = <0x1>;
 		};
 
@@ -48,6 +50,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&l2_shared>;
 			reg = <0x2>;
 		};
 
@@ -55,12 +58,38 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&l2_shared>;
 			reg = <0x3>;
 		};
+
+		l2_shared: cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		svc {
+			compatible = "intel,stratix10-svc";
+			method = "smc";
+			memory-region = <&service_reserved>;
+
+			fpga_mgr: fpga-mgr {
+				compatible = "intel,stratix10-soc-fpga-mgr";
+			};
+		};
+	};
+
+	fpga-region {
+		compatible = "fpga-region";
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		fpga-mgr = <&fpga_mgr>;
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <0 170 4>,
 			     <0 171 4>,
 			     <0 172 4>,
@@ -101,16 +130,19 @@
 		cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <150000000>;
 		};
 
 		cb_intosc_ls_clk: cb-intosc-ls-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <300000000>;
 		};
 
 		f2s_free_clk: f2s-free-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			status = "disabled";
 		};
 
 		osc1: osc1 {
@@ -125,7 +157,7 @@
 		};
 	};
 
-	soc {
+	soc@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -133,14 +165,6 @@
 		interrupt-parent = <&intc>;
 		ranges = <0 0 0 0xffffffff>;
 
-		base_fpga_region {
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-
-			compatible = "fpga-region";
-			fpga-mgr = <&fpga_mgr>;
-		};
-
 		clkmgr: clock-controller@ffd10000 {
 			compatible = "intel,stratix10-clkmgr";
 			reg = <0xffd10000 0x1000>;
@@ -154,7 +178,7 @@
 			interrupt-names = "macirq";
 			mac-address = [00 00 00 00 00 00];
 			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
-			reset-names = "stmmaceth", "stmmaceth-ocp";
+			reset-names = "stmmaceth", "ahb";
 			clocks = <&clkmgr STRATIX10_EMAC0_CLK>, <&clkmgr STRATIX10_EMAC_PTP_CLK>;
 			clock-names = "stmmaceth", "ptp_ref";
 			tx-fifo-depth = <16384>;
@@ -172,7 +196,7 @@
 			interrupt-names = "macirq";
 			mac-address = [00 00 00 00 00 00];
 			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
-			reset-names = "stmmaceth", "stmmaceth-ocp";
+			reset-names = "stmmaceth", "ahb";
 			clocks = <&clkmgr STRATIX10_EMAC1_CLK>, <&clkmgr STRATIX10_EMAC_PTP_CLK>;
 			clock-names = "stmmaceth", "ptp_ref";
 			tx-fifo-depth = <16384>;
@@ -190,7 +214,7 @@
 			interrupt-names = "macirq";
 			mac-address = [00 00 00 00 00 00];
 			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
-			reset-names = "stmmaceth", "stmmaceth-ocp";
+			reset-names = "stmmaceth", "ahb";
 			clocks = <&clkmgr STRATIX10_EMAC2_CLK>, <&clkmgr STRATIX10_EMAC_PTP_CLK>;
 			clock-names = "stmmaceth", "ptp_ref";
 			tx-fifo-depth = <16384>;
@@ -309,6 +333,7 @@
 				 <&clkmgr STRATIX10_SDMMC_CLK>;
 			clock-names = "biu", "ciu";
 			iommus = <&smmu 5>;
+			altr,sysmgr-syscon = <&sysmgr 0x28 4>;
 			status = "disabled";
 		};
 
@@ -331,6 +356,9 @@
 		ocram: sram@ffe00000 {
 			compatible = "mmio-sram";
 			reg = <0xffe00000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xffe00000 0x100000>;
 		};
 
 		pdma: dma-controller@ffda0000 {
@@ -352,9 +380,25 @@
 			reset-names = "dma", "dma-ocp";
 		};
 
+		pinctrl0: pinctrl@ffd13000 {
+			compatible = "pinctrl-single";
+			reg = <0xffd13000 0xA0>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x0000000f>;
+		};
+
+		pinctrl1: pinctrl@ffd13100 {
+			compatible = "pinctrl-single";
+			reg = <0xffd13100 0x20>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x0000000f>;
+		};
+
 		rst: rstmgr@ffd11000 {
 			#reset-cells = <1>;
-			compatible = "altr,stratix10-rst-mgr";
+			compatible = "altr,stratix10-rst-mgr", "altr,rst-mgr";
 			reg = <0xffd11000 0x1000>;
 		};
 
@@ -468,12 +512,6 @@
 			status = "disabled";
 		};
 
-		usbphy0: usbphy@0 {
-			#phy-cells = <0>;
-			compatible = "usb-nop-xceiv";
-			status = "okay";
-		};
-
 		usb0: usb@ffb00000 {
 			compatible = "snps,dwc2";
 			reg = <0xffb00000 0x40000>;
@@ -497,6 +535,7 @@
 			resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
 			clocks = <&clkmgr STRATIX10_USB_CLK>;
+			clock-names = "otg";
 			iommus = <&smmu 7>;
 			status = "disabled";
 		};
@@ -607,17 +646,10 @@
 
 			status = "disabled";
 		};
+	};
 
-		firmware {
-			svc {
-				compatible = "intel,stratix10-svc";
-				method = "smc";
-				memory-region = <&service_reserved>;
-
-				fpga_mgr: fpga-mgr {
-					compatible = "intel,stratix10-soc-fpga-mgr";
-				};
-			};
-		};
+	usbphy0: usbphy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index 48424e459f12..4eee777ef1a1 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -22,26 +22,26 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		hps1 {
+		led-hps1 {
 			label = "hps_led1";
 			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
 		};
 
-		hps2 {
+		led-hps2 {
 			label = "hps_led2";
 			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the reg */
-		reg = <0 0 0 0>;
+		reg = <0 0x80000000 0 0>;
 	};
 
 	ref_033v: regulator-v-ref {
@@ -51,7 +51,7 @@
 		regulator-max-microvolt = <330000>;
 	};
 
-	soc {
+	soc@0 {
 		eccmgr {
 			sdmmca-ecc@ff8c8c00 {
 				compatible = "altr,socfpga-s10-sdmmc-ecc",
@@ -65,6 +65,22 @@
 	};
 };
 
+&pinctrl0 {
+	i2c1_pmx_func: i2c1-pmx-func-pins {
+		pinctrl-single,pins = <
+			0x78   0x4   /* I2C1_SDA (IO6-B) PIN30SEL) */
+			0x7c   0x4   /* I2C1_SCL (IO7-B) PIN31SEL */
+		>;
+	};
+
+	i2c1_pmx_func_gpio: i2c1-pmx-func-gpio-pins {
+		pinctrl-single,pins = <
+			0x78   0x8   /* I2C1_SDA (IO6-B) PIN30SEL) */
+			0x7c   0x8   /* I2C1_SCL (IO7-B) PIN31SEL */
+		>;
+	};
+};
+
 &gpio1 {
 	status = "okay";
 };
@@ -105,6 +121,7 @@
 	cap-mmc-highspeed;
 	broken-cd;
 	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
 };
 
 &osc1 {
@@ -128,7 +145,14 @@
 	status = "okay";
 	clock-frequency = <100000>;
 	i2c-sda-falling-time-ns = <890>;  /* hcnt */
-	i2c-sdl-falling-time-ns = <890>;  /* lcnt */
+	i2c-scl-falling-time-ns = <890>;  /* lcnt */
+
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c1_pmx_func>;
+	pinctrl-1 = <&i2c1_pmx_func_gpio>;
+
+	scl-gpios = <&portb 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&portb 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	adc@14 {
 		compatible = "lltc,ltc2497";
@@ -156,15 +180,11 @@
 &qspi {
 	status = "okay";
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <1>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
@@ -178,12 +198,12 @@
 
 			qspi_boot: partition@0 {
 				label = "Boot and fpga data";
-				reg = <0x0 0x03FE0000>;
+				reg = <0x0 0x04200000>;
 			};
 
-			qspi_rootfs: partition@3FE0000 {
-				label = "Root Filesystem - JFFS2";
-				reg = <0x03FE0000 0x0C020000>;
+			root: partition@4200000 {
+				label = "Root Filesystem - UBIFS";
+				reg = <0x04200000 0x0BE00000>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
index 847a7c01f5af..7c53cb9621e5 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
@@ -22,26 +22,26 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		hps1 {
+		led-hps1 {
 			label = "hps_led1";
 			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
 		};
 
-		hps2 {
+		led-hps2 {
 			label = "hps_led2";
 			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the reg */
-		reg = <0 0 0 0>;
+		reg = <0 0x80000000 0 0>;
 	};
 
 	ref_033v: regulator-v-ref {
@@ -51,7 +51,7 @@
 		regulator-max-microvolt = <330000>;
 	};
 
-	soc {
+	soc@0 {
 		eccmgr {
 			sdmmca-ecc@ff8c8c00 {
 				compatible = "altr,socfpga-s10-sdmmc-ecc",
@@ -102,10 +102,10 @@
 &nand {
 	status = "okay";
 
-	flash@0 {
+	nand@0 {
+		reg = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		reg = <0>;
 		nand-bus-width = <16>;
 
 		partition@0 {
@@ -141,7 +141,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 	i2c-sda-falling-time-ns = <890>;  /* hcnt */
-	i2c-sdl-falling-time-ns = <890>;  /* lcnt */
+	i2c-scl-falling-time-ns = <890>;  /* lcnt */
 
 	adc@14 {
 		compatible = "lltc,ltc2497";
@@ -169,15 +169,11 @@
 &qspi {
 	status = "okay";
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <1>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
@@ -194,7 +190,7 @@
 				reg = <0x0 0x03FE0000>;
 			};
 
-			qspi_rootfs: partition@3FE0000 {
+			qspi_rootfs: partition@3fe0000 {
 				label = "Root Filesystem - JFFS2";
 				reg = <0x03FE0000 0x0C020000>;
 			};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
index a8db58573954..ad52e8a0b9ba 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
@@ -29,7 +29,7 @@
 		linux,initrd-end = <0x125c8324>;
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
@@ -63,13 +63,11 @@
 	status = "okay";
 	phy-mode = "rgmii";
 	phy-addr = <0xffffffff>;
-	snps,max-mtu = <0x0>;
 };
 
 &gmac1 {
 	status = "okay";
 	phy-mode = "rgmii";
-	phy-addr = <0xffffffff>;
 };
 
 &gmac2 {
@@ -80,8 +78,6 @@
 
 &mmc {
 	status = "okay";
-	altr,dw-mshc-ciu-div = <0x3>;
-	altr,dw-mshc-sdr-timing = <0x0 0x3>;
 	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	broken-cd;
@@ -106,12 +102,7 @@
 	status = "okay";
 };
 
-&rst {
-	altr,modrst-offset = <0x20>;
-};
-
 &sysmgr {
 	reg = <0xffd12000 0x1000>;
 	interrupts = <0x0 0x10 0x4>;
-	cpu1-start-addr = <0xffd06230>;
 };
diff --git a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
index 4eb2cd14e00b..f49209fddbbb 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
@@ -39,6 +39,7 @@
 / {
 	model = "Annapurna Labs Alpine v2";
 	compatible = "al,alpine-v2";
+	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;
 
@@ -89,6 +90,22 @@
 		clock-frequency = <1000000>;
 	};
 
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -97,22 +114,6 @@
 		interrupt-parent = <&gic>;
 		ranges;
 
-		timer {
-			compatible = "arm,armv8-timer";
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-				     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-				     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-		};
-
-		pmu {
-			compatible = "arm,armv8-pmuv3";
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
 		gic: interrupt-controller@f0200000 {
 			compatible = "arm,gic-v3";
 			reg = <0x0 0xf0200000 0x0 0x10000>,	/* GIC Dist */
@@ -122,6 +123,7 @@
 			      <0x0 0xf0120000 0x0 0x2000>;	/* GICH */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 		};
 
@@ -145,13 +147,12 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <160>;
 			al,msi-num-spis = <160>;
 		};
 
-		io-fabric {
+		io-bus@fc000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -159,7 +160,6 @@
 
 			uart0: serial@1883000 {
 				compatible = "ns16550a";
-				device_type = "serial";
 				reg = <0x1883000 0x1000>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <500000000>;
@@ -170,7 +170,6 @@
 
 			uart1: serial@1884000 {
 				compatible = "ns16550a";
-				device_type = "serial";
 				reg = <0x1884000 0x1000>;
 				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <500000000>;
@@ -181,7 +180,6 @@
 
 			uart2: serial@1885000 {
 				compatible = "ns16550a";
-				device_type = "serial";
 				reg = <0x1885000 0x1000>;
 				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <500000000>;
@@ -192,7 +190,6 @@
 
 			uart3: serial@1886000 {
 				compatible = "ns16550a";
-				device_type = "serial";
 				reg = <0x1886000 0x1000>;
 				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <500000000>;
diff --git a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
index 73a352ea8fd5..bd35e0e9d0ab 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
@@ -244,36 +244,40 @@
 			next-level-cache = <&cluster3_l2>;
 		};
 
-		cluster0_l2: cache@0 {
+		cluster0_l2: cache-0 {
 			compatible = "cache";
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
 			cache-level = <2>;
+			cache-unified;
 		};
 
-		cluster1_l2: cache@100 {
+		cluster1_l2: cache-100 {
 			compatible = "cache";
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
 			cache-level = <2>;
+			cache-unified;
 		};
 
-		cluster2_l2: cache@200 {
+		cluster2_l2: cache-200 {
 			compatible = "cache";
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
 			cache-level = <2>;
+			cache-unified;
 		};
 
-		cluster3_l2: cache@300 {
+		cluster3_l2: cache-300 {
 			compatible = "cache";
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
 			cache-level = <2>;
+			cache-unified;
 		};
 
 	};
@@ -314,8 +318,9 @@
 		#size-cells = <2>;
 		ranges;
 
-		gic: interrupt-controller@f0000000 {
+		gic: interrupt-controller@f0800000 {
 			compatible = "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg = <0x0 0xf0800000 0 0x10000>,	/* GICD */
@@ -351,14 +356,13 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <336>;
 			al,msi-num-spis = <959>;
 			interrupt-parent = <&gic>;
 		};
 
-		io-fabric {
+		io-bus@fc000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index 68103a8b0ef5..8502cc2afbc5 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_PENSANDO) += elba-asic.dtb
 dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
index 02bff65e5fd6..8862adae44e9 100644
--- a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
@@ -26,45 +26,43 @@
 };
 
 &ccp0 {
-	status = "ok";
-	amd,zlib-support = <1>;
+	status = "okay";
 };
 
 /**
  * NOTE: In Rev.B, gpio0 is reserved.
  */
 &gpio1 {
-	status = "ok";
+	status = "okay";
 };
 
 &gpio4 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c0 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c1 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie0 {
-	status = "ok";
+	status = "okay";
 };
 
 &spi0 {
-	status = "ok";
+	status = "okay";
 };
 
 &spi1 {
-	status = "ok";
-	sdcard0: sdcard@0 {
+	status = "okay";
+	sdcard0: mmc@0 {
 		compatible = "mmc-spi-slot";
 		reg = <0>;
 		spi-max-frequency = <20000000>;
 		voltage-ranges = <3200 3400>;
-		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
 		pl022,com-mode = <0x0>;
 		pl022,rx-level-trig = <0>;
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
index 07dab1f1e3c8..b34dd8d5d1b1 100644
--- a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
@@ -8,86 +8,25 @@
 
 /dts-v1/;
 
-/include/ "amd-seattle-soc.dtsi"
-/include/ "amd-seattle-cpus.dtsi"
+/include/ "amd-overdrive-rev-b0.dts"
 
 / {
 	model = "AMD Seattle (Rev.B1) Development Board (Overdrive)";
-	compatible = "amd,seattle-overdrive", "amd,seattle";
-
-	chosen {
-		stdout-path = &serial0;
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-};
-
-&ccp0 {
-	status = "ok";
-	amd,zlib-support = <1>;
-};
-
-/**
- * NOTE: In Rev.B, gpio0 is reserved.
- */
-&gpio1 {
-	status = "ok";
 };
 
 &gpio2 {
-	status = "ok";
+	status = "okay";
 };
 
 &gpio3 {
-	status = "ok";
-};
-
-&gpio4 {
-	status = "ok";
-};
-
-&i2c0 {
-	status = "ok";
-};
-
-&i2c1 {
-	status = "ok";
-};
-
-&pcie0 {
-	status = "ok";
+	status = "okay";
 };
 
 &sata1 {
-	status = "ok";
-};
-
-&spi0 {
-	status = "ok";
-};
-
-&spi1 {
-	status = "ok";
-	sdcard0: sdcard@0 {
-		compatible = "mmc-spi-slot";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		voltage-ranges = <3200 3400>;
-		pl022,hierarchy = <0>;
-		pl022,interface = <0>;
-		pl022,com-mode = <0x0>;
-		pl022,rx-level-trig = <0>;
-		pl022,tx-level-trig = <0>;
-	};
+	status = "okay";
 };
 
 &ipmi_kcs {
-	status = "ok";
+	status = "okay";
 };
 
-&smb0 {
-	/include/ "amd-seattle-xgbe-b.dtsi"
-};
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi
index 2dd2c28171ee..73f687773ce6 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi
@@ -5,51 +5,39 @@
  * Copyright (C) 2014 Advanced Micro Devices, Inc.
  */
 
-	adl3clk_100mhz: clk100mhz_0 {
+	adl3clk_100mhz: uartspiclk_100mhz: clock-100000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "adl3clk_100mhz";
 	};
 
-	ccpclk_375mhz: clk375mhz {
+	ccpclk_375mhz: clock-375000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <375000000>;
 		clock-output-names = "ccpclk_375mhz";
 	};
 
-	sataclk_333mhz: clk333mhz {
+	sataclk_333mhz: clock-333000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <333000000>;
 		clock-output-names = "sataclk_333mhz";
 	};
 
-	pcieclk_500mhz: clk500mhz_0 {
+	dmaclk_500mhz: pcieclk_500mhz: clock-500000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <500000000>;
 		clock-output-names = "pcieclk_500mhz";
 	};
 
-	dmaclk_500mhz: clk500mhz_1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <500000000>;
-		clock-output-names = "dmaclk_500mhz";
-	};
-
-	miscclk_250mhz: clk250mhz_4 {
+	xgmacclk0_dma_250mhz: xgmacclk0_ptp_250mhz: xgmacclk1_dma_250mhz: xgmacclk1_ptp_250mhz:
+	miscclk_250mhz: clock-250000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <250000000>;
 		clock-output-names = "miscclk_250mhz";
 	};
 
-	uartspiclk_100mhz: clk100mhz_1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-		clock-output-names = "uartspiclk_100mhz";
-	};
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 690020589d41..a611f8288b3e 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -11,6 +11,8 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	/include/ "amd-seattle-clks.dtsi"
+
 	gic0: interrupt-controller@e1101000 {
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		interrupt-controller;
@@ -38,7 +40,7 @@
 			     <1 10 0xff04>;
 	};
 
-	smb0: smb {
+	smb0: bus {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -51,8 +53,6 @@
 		 */
 		dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
 
-		/include/ "amd-seattle-clks.dtsi"
-
 		sata0: sata@e0300000 {
 			compatible = "snps,dwc-ahci";
 			reg = <0 0xe0300000 0 0xf0000>;
@@ -121,20 +121,18 @@
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0 0xe1020000 0 0x1000>;
-			spi-controller;
 			interrupts = <0 330 4>;
-			clocks = <&uartspiclk_100mhz>;
-			clock-names = "apb_pclk";
+			clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>;
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		spi1: spi@e1030000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0 0xe1030000 0 0x1000>;
-			spi-controller;
 			interrupts = <0 329 4>;
-			clocks = <&uartspiclk_100mhz>;
-			clock-names = "apb_pclk";
+			clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>;
+			clock-names = "sspclk", "apb_pclk";
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
index 9259e547e2e8..18b0c2dd1b2d 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
@@ -5,35 +5,7 @@
  * Copyright (C) 2015 Advanced Micro Devices, Inc.
  */
 
-	xgmacclk0_dma_250mhz: clk250mhz_0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-		clock-output-names = "xgmacclk0_dma_250mhz";
-	};
-
-	xgmacclk0_ptp_250mhz: clk250mhz_1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-		clock-output-names = "xgmacclk0_ptp_250mhz";
-	};
-
-	xgmacclk1_dma_250mhz: clk250mhz_2 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-		clock-output-names = "xgmacclk1_dma_250mhz";
-	};
-
-	xgmacclk1_ptp_250mhz: clk250mhz_3 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-		clock-output-names = "xgmacclk1_ptp_250mhz";
-	};
-
-	xgmac0: xgmac@e0700000 {
+	xgmac0: ethernet@e0700000 {
 		compatible = "amd,xgbe-seattle-v1a";
 		reg = <0 0xe0700000 0 0x80000>,
 		      <0 0xe0780000 0 0x80000>,
@@ -59,7 +31,7 @@
 		dma-coherent;
 	};
 
-	xgmac1: xgmac@e0900000 {
+	xgmac1: ethernet@e0900000 {
 		compatible = "amd,xgbe-seattle-v1a";
 		reg = <0 0xe0900000 0 0x80000>,
 		      <0 0xe0980000 0 0x80000>,
diff --git a/arch/arm64/boot/dts/amd/elba-16core.dtsi b/arch/arm64/boot/dts/amd/elba-16core.dtsi
new file mode 100644
index 000000000000..6c1b7b8fe354
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/elba-16core.dtsi
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright 2020-2023 Advanced Micro Devices, Inc.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 { cpu = <&cpu0>; };
+				core1 { cpu = <&cpu1>; };
+				core2 { cpu = <&cpu2>; };
+				core3 { cpu = <&cpu3>; };
+			};
+
+			cluster1 {
+				core0 { cpu = <&cpu4>; };
+				core1 { cpu = <&cpu5>; };
+				core2 { cpu = <&cpu6>; };
+				core3 { cpu = <&cpu7>; };
+			};
+
+			cluster2 {
+				core0 { cpu = <&cpu8>; };
+				core1 { cpu = <&cpu9>; };
+				core2 { cpu = <&cpu10>; };
+				core3 { cpu = <&cpu11>; };
+			};
+
+			cluster3 {
+				core0 { cpu = <&cpu12>; };
+				core1 { cpu = <&cpu13>; };
+				core2 { cpu = <&cpu14>; };
+				core3 { cpu = <&cpu15>; };
+			};
+		};
+
+		/* CLUSTER 0 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0>;
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x1>;
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x2>;
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x3>;
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		/* CLUSTER 1 */
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x102>;
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x103>;
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		/* CLUSTER 2 */
+		cpu8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x200>;
+			next-level-cache = <&l2_2>;
+			enable-method = "psci";
+		};
+
+		cpu9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x201>;
+			next-level-cache = <&l2_2>;
+			enable-method = "psci";
+		};
+
+		cpu10: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x202>;
+			next-level-cache = <&l2_2>;
+			enable-method = "psci";
+		};
+
+		cpu11: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x203>;
+			next-level-cache = <&l2_2>;
+			enable-method = "psci";
+		};
+
+		l2_2: l2-cache2 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		/* CLUSTER 3 */
+		cpu12: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x300>;
+			next-level-cache = <&l2_3>;
+			enable-method = "psci";
+		};
+
+		cpu13: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x301>;
+			next-level-cache = <&l2_3>;
+			enable-method = "psci";
+		};
+
+		cpu14: cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x302>;
+			next-level-cache = <&l2_3>;
+			enable-method = "psci";
+		};
+
+		cpu15: cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x303>;
+			next-level-cache = <&l2_3>;
+			enable-method = "psci";
+		};
+
+		l2_3: l2-cache3 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amd/elba-asic-common.dtsi b/arch/arm64/boot/dts/amd/elba-asic-common.dtsi
new file mode 100644
index 000000000000..d12e9a7b5587
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/elba-asic-common.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright 2020-2022 Advanced Micro Devices, Inc.
+ */
+
+&ahb_clk {
+	clock-frequency = <400000000>;
+};
+
+&emmc_clk {
+	clock-frequency = <200000000>;
+};
+
+&flash_clk {
+	clock-frequency = <400000000>;
+};
+
+&ref_clk {
+	clock-frequency = <156250000>;
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <2>;
+		m25p,fast-read;
+		cdns,read-delay = <0>;
+		cdns,tshsl-ns = <0>;
+		cdns,tsd2d-ns = <0>;
+		cdns,tchsh-ns = <0>;
+		cdns,tslch-ns = <0>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&wdt0 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&spi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	num-cs = <4>;
+	cs-gpios = <0>, <0>, <&porta 1 GPIO_ACTIVE_LOW>,
+		   <&porta 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amd/elba-asic.dts b/arch/arm64/boot/dts/amd/elba-asic.dts
new file mode 100644
index 000000000000..20b0fa0807a1
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/elba-asic.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree file for AMD Pensando Elba Board.
+ *
+ * Copyright 2020-2022 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "elba.dtsi"
+#include "elba-16core.dtsi"
+#include "elba-asic-common.dtsi"
+#include "elba-flash-parts.dtsi"
+
+/ {
+	model = "AMD Pensando Elba Board";
+	compatible = "amd,pensando-elba-ortano", "amd,pensando-elba";
+
+	aliases {
+		serial0 = &uart0;
+		spi0 = &spi0;
+		spi1 = &qspi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/amd/elba-flash-parts.dtsi b/arch/arm64/boot/dts/amd/elba-flash-parts.dtsi
new file mode 100644
index 000000000000..6ea2d777c8c9
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/elba-flash-parts.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright 2020-2023 Advanced Micro Devices, Inc.
+ */
+
+&flash0 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "rsvd";
+			reg = <0x0 0x10000>;
+			read-only;
+		};
+
+		partition@10000 {
+			label = "flash";
+			reg = <0x10000 0xfff0000>;
+		};
+
+		partition@f0000 {
+			label = "golduenv";
+			reg = <0xf0000 0x10000>;
+		};
+
+		partition@100000 {
+			label = "boot0";
+			reg = <0x100000 0x80000>;
+		};
+
+		partition@180000 {
+			label = "golduboot";
+			reg = <0x180000 0x200000>;
+		};
+
+		partition@380000 {
+			label = "brdcfg0";
+			reg = <0x380000 0x10000>;
+		};
+
+		partition@390000 {
+			label = "brdcfg1";
+			reg = <0x390000 0x10000>;
+		};
+
+		partition@400000 {
+			label = "goldfw";
+			reg = <0x400000 0x3c00000>;
+		};
+
+		partition@4010000 {
+			label = "fwmap";
+			reg = <0x4010000 0x20000>;
+		};
+
+		partition@4030000 {
+			label = "fwsel";
+			reg = <0x4030000 0x20000>;
+		};
+
+		partition@4090000 {
+			label = "bootlog";
+			reg = <0x4090000 0x20000>;
+		};
+
+		partition@40b0000 {
+			label = "panicbuf";
+			reg = <0x40b0000 0x20000>;
+		};
+
+		partition@40d0000 {
+			label = "uservars";
+			reg = <0x40d0000 0x20000>;
+		};
+
+		partition@4200000 {
+			label = "uboota";
+			reg = <0x4200000 0x400000>;
+		};
+
+		partition@4600000 {
+			label = "ubootb";
+			reg = <0x4600000 0x400000>;
+		};
+
+		partition@4a00000 {
+			label = "mainfwa";
+			reg = <0x4a00000 0x1000000>;
+		};
+
+		partition@5a00000 {
+			label = "mainfwb";
+			reg = <0x5a00000 0x1000000>;
+		};
+
+		partition@6a00000 {
+			label = "diaguboot";
+			reg = <0x6a00000 0x400000>;
+		};
+
+		partition@6e00000 {
+			label = "spare";
+			reg = <0x6e00000 0x1200000>;
+		};
+
+		partition@8000000 {
+			label = "diagfw";
+			reg = <0x8000000 0x7fe0000>;
+		};
+
+		partition@ffe0000 {
+			label = "ubootenv";
+			reg = <0xffe0000 0x10000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amd/elba.dtsi b/arch/arm64/boot/dts/amd/elba.dtsi
new file mode 100644
index 000000000000..758bce0a0b2a
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/elba.dtsi
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright 2020-2022 Advanced Micro Devices, Inc.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "dt-bindings/interrupt-controller/arm-gic.h"
+
+/ {
+	model = "Elba ASIC Board";
+	compatible = "amd,pensando-elba";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	dma-coherent;
+
+	ahb_clk: oscillator0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	emmc_clk: oscillator2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	flash_clk: oscillator3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	ref_clk: oscillator4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		i2c0: i2c@400 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x400 0x0 0x100>;
+			clocks = <&ahb_clk>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-sda-hold-time-ns = <480>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@1400 {
+			compatible = "snps,dw-wdt";
+			reg = <0x0 0x1400 0x0 0x100>;
+			clocks = <&ahb_clk>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		qspi: spi@2400 {
+			compatible = "amd,pensando-elba-qspi", "cdns,qspi-nor";
+			reg = <0x0 0x2400 0x0 0x400>,
+			      <0x0 0x7fff0000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&flash_clk>;
+			cdns,fifo-depth = <1024>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x7fff0000>;
+			status = "disabled";
+		};
+
+		spi0: spi@2800 {
+			compatible = "amd,pensando-elba-spi";
+			reg = <0x0 0x2800 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			amd,pensando-elba-syscon = <&syscon>;
+			clocks = <&ahb_clk>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			num-cs = <2>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@4000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x4000 0x0 0x78>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			porta: gpio-port@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <8>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				interrupt-parent = <&gic>;
+				#interrupt-cells = <2>;
+			};
+
+			portb: gpio-port@1 {
+				compatible = "snps,dw-apb-gpio-port";
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <8>;
+			};
+		};
+
+		uart0: serial@4800 {
+			compatible = "ns16550a";
+			reg = <0x0 0x4800 0x0 0x100>;
+			clocks = <&ref_clk>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		gic: interrupt-controller@800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x800000 0x0 0x200000>,	/* GICD */
+			      <0x0 0xa00000 0x0 0x200000>,	/* GICR */
+			      <0x0 0x60000000 0x0 0x2000>,	/* GICC */
+			      <0x0 0x60010000 0x0 0x1000>,	/* GICH */
+			      <0x0 0x60020000 0x0 0x2000>;	/* GICV */
+			#address-cells = <2>;
+			#size-cells = <2>;
+			#interrupt-cells = <3>;
+			ranges;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			/*
+			 * Elba specific pre-ITS is enabled using the
+			 * existing property socionext,synquacer-pre-its
+			 */
+			gic_its: msi-controller@820000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x820000 0x0 0x10000>;
+				msi-controller;
+				#msi-cells = <1>;
+				socionext,synquacer-pre-its =
+							<0xc00000 0x1000000>;
+			};
+		};
+
+		emmc: mmc@30440000 {
+			compatible = "amd,pensando-elba-sd4hc", "cdns,sd4hc";
+			reg = <0x0 0x30440000 0x0 0x10000>,
+			      <0x0 0x30480044 0x0 0x4>;	/* byte-lane ctrl */
+			clocks = <&emmc_clk>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,phy-input-delay-sd-highspeed = <0x4>;
+			cdns,phy-input-delay-legacy = <0x4>;
+			cdns,phy-input-delay-sd-uhs-sdr50 = <0x6>;
+			cdns,phy-input-delay-sd-uhs-ddr50 = <0x16>;
+			mmc-ddr-1_8v;
+			status = "disabled";
+		};
+
+		syscon: syscon@307c0000 {
+			compatible = "amd,pensando-elba-syscon", "syscon";
+			reg = <0x0 0x307c0000 0x0 0x3000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 8773211df50e..619dce79b020 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -1,17 +1,42 @@
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c308l-aw419.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-s6-s905x5-bl209.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-s7-s805x3-bp201.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-s7d-s905x5m-bm202.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad402.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-brcm.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-realtek.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-bananapi-m2s.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3-ts050.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-mnt-reform2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-dreambox-one.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-dreambox-two.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-libretech-cc.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-go-ultra.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2l.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-radxa-zero2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-bananapi-m2s.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb
@@ -27,6 +52,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-libretech-ac.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805y-xiaomi-aquaman.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-mecool-kii-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
@@ -43,6 +69,9 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-vero4k.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxlx-s905l-p271.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-gt1-ultimate.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
@@ -51,16 +80,26 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-ugoos-am3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air-gbit.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m2-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l-ts050.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-s905d3-libretech-cc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
+
+# Overlays
+meson-g12a-fbx8am-brcm-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-brcm.dtbo
+meson-g12a-fbx8am-realtek-dtbs	:= meson-g12a-fbx8am.dtb meson-g12a-fbx8am-realtek.dtbo
+meson-g12b-a311d-khadas-vim3-ts050-dtbs := meson-g12b-a311d-khadas-vim3.dtb meson-khadas-vim3-ts050.dtbo
+meson-sm1-khadas-vim3l-ts050-dtbs	:= meson-sm1-khadas-vim3l.dtb meson-khadas-vim3-ts050.dtbo
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts b/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts
new file mode 100644
index 000000000000..ad3127e695d9
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-a4.dtsi"
+
+/ {
+	model = "Amlogic A113L2 ba400 Development Board";
+	compatible = "amlogic,ba400", "amlogic,a4";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 10 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0xa00000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
new file mode 100644
index 000000000000..54d7a2d56ef6
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x2000>,
+			      <0x0 0xfff04000 0 0x2000>,
+			      <0x0 0xfff06000 0 0x2000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			watchdog@2100 {
+				compatible = "amlogic,a4-wdt", "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,a4-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			sec_ao: ao-secure@10220 {
+				compatible = "amlogic,a4-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-reset.h b/arch/arm64/boot/dts/amlogic/amlogic-a4-reset.h
new file mode 100644
index 000000000000..f6a4c90bab3c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-reset.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __DTS_AMLOGIC_A4_RESET_H
+#define __DTS_AMLOGIC_A4_RESET_H
+
+/* RESET0 */
+/*						0-3 */
+#define RESET_USB				4
+/*						5-6*/
+#define RESET_U2PHY22				7
+#define RESET_USBPHY20				8
+#define RESET_U2PHY21				9
+#define RESET_USB2DRD				10
+#define RESET_U2H				11
+#define RESET_LED_CTRL				12
+/*						13-31 */
+
+/* RESET1 */
+#define RESET_AUDIO				32
+#define RESET_AUDIO_VAD				33
+/*						34*/
+#define RESET_DDR_APB				35
+#define RESET_DDR				36
+#define RESET_VOUT_VENC				37
+#define RESET_VOUT				38
+/*						39-47 */
+#define RESET_ETHERNET				48
+/*						49-63 */
+
+/* RESET2 */
+#define RESET_DEVICE_MMC_ARB			64
+#define RESET_IRCTRL				65
+/*						66*/
+#define RESET_TS_PLL				67
+/*						68-72*/
+#define RESET_SPICC_0				73
+#define RESET_SPICC_1				74
+/*						75-79*/
+#define RESET_MSR_CLK				80
+/*						81*/
+#define RESET_SAR_ADC				82
+/*						83-87*/
+#define RESET_ACODEC				88
+/*						89-90*/
+#define RESET_WATCHDOG				91
+/*						92-95*/
+
+/* RESET3 */
+/*						96-127 */
+
+/* RESET4 */
+/*						128-131 */
+#define RESET_PWM_AB				132
+#define RESET_PWM_CD				133
+#define RESET_PWM_EF				134
+#define RESET_PWM_GH				135
+/*						136-137*/
+#define RESET_UART_A				138
+#define RESET_UART_B				139
+/*						140*/
+#define RESET_UART_D				141
+#define RESET_UART_E				142
+/*						143-144*/
+#define RESET_I2C_M_A				145
+#define RESET_I2C_M_B				146
+#define RESET_I2C_M_C				147
+#define RESET_I2C_M_D				148
+/*						149-151*/
+#define RESET_SDEMMC_A				152
+/*						153*/
+#define RESET_SDEMMC_C				154
+/*						155-159*/
+
+/* RESET5 */
+/*						160-175*/
+#define RESET_BRG_AO_NIC_SYS			176
+/*						177*/
+#define RESET_BRG_AO_NIC_MAIN			178
+#define RESET_BRG_AO_NIC_AUDIO			179
+/*						180-183*/
+#define RESET_BRG_AO_NIC_ALL			184
+/*						185*/
+#define RESET_BRG_NIC_SDIO			186
+#define RESET_BRG_NIC_EMMC			187
+#define RESET_BRG_NIC_DSU			188
+#define RESET_BRG_NIC_CLK81			189
+#define RESET_BRG_NIC_MAIN			190
+#define RESET_BRG_NIC_ALL			191
+
+#endif
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
new file mode 100644
index 000000000000..fce45933fa28
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#include "amlogic-a4-common.dtsi"
+#include "amlogic-a4-reset.h"
+#include <dt-bindings/power/amlogic,a4-pwrc.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,a4-pwrc";
+			#power-domain-cells = <1>;
+		};
+	};
+};
+
+&apb {
+	reset: reset-controller@2000 {
+		compatible = "amlogic,a4-reset",
+			     "amlogic,meson-s4-reset";
+		reg = <0x0 0x2000 0x0 0x98>;
+		#reset-cells = <1>;
+	};
+
+	periphs_pinctrl: pinctrl@4000 {
+		compatible = "amlogic,pinctrl-a4";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x4000 0x0 0x280>;
+
+		gpiox: gpio@100 {
+			reg = <0 0x100 0 0x40>, <0 0xc 0 0xc>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 18>;
+		};
+
+		gpiot: gpio@140 {
+			reg = <0 0x140 0 0x40>, <0 0x2c 0 0xc>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_T<<8) 23>;
+		};
+
+		gpiod: gpio@180 {
+			reg = <0 0x180 0 0x40>, <0 0x40 0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 16>;
+		};
+
+		gpioe: gpio@1c0 {
+			reg = <0 0x1c0 0 0x40>, <0 0x48 0 0x4>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
+		};
+
+		gpiob: gpio@240 {
+			reg = <0 0x240 0 0x40>, <0 0 0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+		};
+
+		func-uart-a {
+			uart_a_default: group-uart-a-pins1 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_X, 11, 1)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_X, 12, 1)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_X, 13, 1)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_X, 14, 1)>;
+			};
+
+			group-uart-a-pins2 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_D, 2, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_D, 3, 3)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+
+		func-uart-b {
+			uart_b_default: group-uart-b-pins {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_E, 0, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_E, 1, 3)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+
+		func-uart-d {
+			uart_d_default: group-uart-d-pins1 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_T, 18, 4)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 19, 4)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+
+			group-uart-d-pins2 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_T, 7, 2)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 8, 2)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 9, 2)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 10, 2)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+
+		func-uart-e {
+			uart_e_default: group-uart-e-pins {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_T, 14, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 15, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 16, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 17, 3)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+	};
+
+	gpio_intc: interrupt-controller@4080 {
+		compatible = "amlogic,a4-gpio-intc",
+			     "amlogic,meson-gpio-intc";
+		reg = <0x0 0x4080 0x0 0x20>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		amlogic,channel-interrupts =
+			<10 11 12 13 14 15 16 17 18 19 20 21>;
+	};
+
+	ao_pinctrl: pinctrl@8e700 {
+		compatible = "amlogic,pinctrl-a4";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x8e700 0x0 0x80>;
+
+		gpioao: gpio@4 {
+			reg = <0 0x4 0 0x16>, <0 0 0 0x4>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_AO<<8) 7>;
+		};
+
+		test_n: gpio@44 {
+			reg = <0 0x44 0 0x20>;
+			reg-names = "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+		};
+	};
+
+	gpio_ao_intc: interrupt-controller@8e72c {
+		compatible = "amlogic,a4-gpio-ao-intc",
+			     "amlogic,meson-gpio-intc";
+		reg = <0x0 0x8e72c 0x0 0x0c>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		amlogic,channel-interrupts = <140 141>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5-a113x2-av400.dts b/arch/arm64/boot/dts/amlogic/amlogic-a5-a113x2-av400.dts
new file mode 100644
index 000000000000..11d8b88c1ce5
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a5-a113x2-av400.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-a5.dtsi"
+
+/ {
+	model = "Amlogic A113X2 av400 Development Board";
+	compatible = "amlogic,av400", "amlogic,a5";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 10 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0xa00000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5-reset.h b/arch/arm64/boot/dts/amlogic/amlogic-a5-reset.h
new file mode 100644
index 000000000000..cdf0f5159620
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a5-reset.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __DTS_AMLOGIC_A5_RESET_H
+#define __DTS_AMLOGIC_A5_RESET_H
+
+/* RESET0 */
+/*						0-3 */
+#define RESET_USB				4
+/*						5-7 */
+#define RESET_USBPHY20				8
+/*						9 */
+#define RESET_USB2DRD				10
+/*						11-31 */
+
+/* RESET1 */
+#define RESET_AUDIO				32
+#define RESET_AUDIO_VAD				33
+/*                                              34 */
+#define RESET_DDR_APB				35
+#define RESET_DDR				36
+/*						37-40 */
+#define RESET_DSPA_DEBUG			41
+/*                                              42 */
+#define RESET_DSPA				43
+/*						44-46 */
+#define RESET_NNA				47
+#define RESET_ETHERNET				48
+/*						49-63 */
+
+/* RESET2 */
+#define RESET_ABUS_ARB				64
+#define RESET_IRCTRL				65
+/*						66 */
+#define RESET_TS_PLL				67
+/*						68-72 */
+#define RESET_SPICC_0				73
+#define RESET_SPICC_1				74
+#define RESET_RSA				75
+
+/*						76-79 */
+#define RESET_MSR_CLK				80
+#define RESET_SPIFC				81
+#define RESET_SAR_ADC				82
+/*						83-90 */
+#define RESET_WATCHDOG				91
+/*						92-95 */
+
+/* RESET3 */
+/*						96-127 */
+
+/* RESET4 */
+#define RESET_RTC				128
+/*						129-131 */
+#define RESET_PWM_AB				132
+#define RESET_PWM_CD				133
+#define RESET_PWM_EF				134
+#define RESET_PWM_GH				135
+/*						104-105 */
+#define RESET_UART_A				138
+#define RESET_UART_B				139
+#define RESET_UART_C				140
+#define RESET_UART_D				141
+#define RESET_UART_E				142
+/*						143*/
+#define RESET_I2C_S_A				144
+#define RESET_I2C_M_A				145
+#define RESET_I2C_M_B				146
+#define RESET_I2C_M_C				147
+#define RESET_I2C_M_D				148
+/*						149-151 */
+#define RESET_SDEMMC_A				152
+/*						153 */
+#define RESET_SDEMMC_C				154
+/*						155-159*/
+
+/* RESET5 */
+/*						160-175 */
+#define RESET_BRG_AO_NIC_SYS			176
+#define RESET_BRG_AO_NIC_DSPA			177
+#define RESET_BRG_AO_NIC_MAIN			178
+#define RESET_BRG_AO_NIC_AUDIO			179
+/*						180-183 */
+#define RESET_BRG_AO_NIC_ALL			184
+#define RESET_BRG_NIC_NNA			185
+#define RESET_BRG_NIC_SDIO			186
+#define RESET_BRG_NIC_EMMC			187
+#define RESET_BRG_NIC_DSU			188
+#define RESET_BRG_NIC_SYSCLK			189
+#define RESET_BRG_NIC_MAIN			190
+#define RESET_BRG_NIC_ALL			191
+
+#endif
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
new file mode 100644
index 000000000000..b1da8cbaa25a
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#include "amlogic-a4-common.dtsi"
+#include "amlogic-a5-reset.h"
+#include <dt-bindings/power/amlogic,a5-pwrc.h>
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,a5-pwrc";
+			#power-domain-cells = <1>;
+		};
+	};
+};
+
+&apb {
+	reset: reset-controller@2000 {
+		compatible = "amlogic,a5-reset",
+			     "amlogic,meson-s4-reset";
+		reg = <0x0 0x2000 0x0 0x98>;
+		#reset-cells = <1>;
+	};
+
+	gpio_intc: interrupt-controller@4080 {
+		compatible = "amlogic,a5-gpio-intc",
+			     "amlogic,meson-gpio-intc";
+		reg = <0x0 0x4080 0x0 0x20>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		amlogic,channel-interrupts =
+			<10 11 12 13 14 15 16 17 18 19 20 21>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
new file mode 100644
index 000000000000..a6736ad2a648
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-c3.dtsi"
+
+/ {
+	model = "Amlogic C302 aw409 Development Board";
+	compatible = "amlogic,aw409", "amlogic,c3";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+		spi0 = &spifc;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x10000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 9 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@7f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x07f00000 0x0 0x900000>;
+			no-map;
+		};
+	};
+
+	main_12v: regulator-main-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddq: regulator-vddq {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDQ";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ddr4_2v5: regulator-ddr4-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "DDR4_2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD1V8_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_b: regulator-vddio-3v3-b {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_B";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sdcard: regulator-sdcard {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCARD_POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-on-flash-bbt;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x00200000>;
+		};
+		partition@200000 {
+			label = "env";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "system";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "rootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "media";
+			reg = <0x04000000 0x8000000>;
+		};
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&spifc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&spifc_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <83000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		status = "disabled";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "boot";
+				reg = <0 0x200000>;
+			};
+
+			partition@200000 {
+				label = "env";
+				reg = <0x200000 0x400000>;
+			};
+
+			partition@600000 {
+				label = "system";
+				reg = <0x600000 0xa00000>;
+			};
+
+			partition@1000000 {
+				label = "rootfs";
+				reg = <0x1000000 0x3000000>;
+			};
+
+			partition@4000000 {
+				label = "data";
+				reg = <0x4000000 0x8000000>;
+			};
+		};
+	};
+};
+
+&sd {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default","clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&sdcard>;
+	vqmmc-supply = <&sdcard>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts
new file mode 100644
index 000000000000..45f8631f9feb
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-c3.dtsi"
+
+/ {
+	model = "Amlogic C308l aw419 Development Board";
+	compatible = "amlogic,aw419", "amlogic,c3";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+		spi0 = &spifc;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 9 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@7f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x07f00000 0x0 0x900000>;
+			no-map;
+		};
+	};
+
+	main_12v: regulator-main-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddq: regulator-vddq {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDQ";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ddr4_2v5: regulator-ddr4-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "DDR4_2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD1V8_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_b: regulator-vddio-3v3-b {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_B";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sdcard: regulator-sdcard {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCARD_POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-on-flash-bbt;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x00200000>;
+		};
+		partition@200000 {
+			label = "env";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "system";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "rootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "media";
+			reg = <0x04000000 0x8000000>;
+		};
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&spifc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&spifc_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <83000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		status = "disabled";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "boot";
+				reg = <0 0x200000>;
+			};
+
+			partition@200000 {
+				label = "env";
+				reg = <0x200000 0x400000>;
+			};
+
+			partition@600000 {
+				label = "system";
+				reg = <0x600000 0xa00000>;
+			};
+
+			partition@1000000 {
+				label = "rootfs";
+				reg = <0x1000000 0x3000000>;
+			};
+
+			partition@4000000 {
+				label = "data";
+				reg = <0x4000000 0x8000000>;
+			};
+		};
+	};
+};
+
+&sd {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default","clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&sdcard>;
+	vqmmc-supply = <&sdcard>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
new file mode 100644
index 000000000000..07aaaf71ea9a
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -0,0 +1,1035 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/amlogic,c3-reset.h>
+#include <dt-bindings/clock/amlogic,c3-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,c3-scmi-clkc.h>
+#include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
+#include <dt-bindings/power/amlogic,c3-pwrc.h>
+#include <dt-bindings/gpio/amlogic-c3-gpio.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x7d000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	xtal_32k: xtal-clk-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32k";
+		#clock-cells = <0>;
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,c3-pwrc";
+			#power-domain-cells = <1>;
+		};
+	};
+
+	sram@7f50e00 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x07f50e00 0x0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x07f50e00 0x100>;
+
+		scmi_shmem: sram@0 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x100>;
+		};
+	};
+
+	firmware {
+		scmi: scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0x820000C1>;
+			shmem = <&scmi_shmem>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x2000>,
+			      <0x0 0xfff04000 0 0x2000>,
+			      <0x0 0xfff06000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apb4: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			clkc_periphs: clock-controller@0 {
+				compatible = "amlogic,c3-peripherals-clkc";
+				reg = <0x0 0x0 0x0 0x49c>;
+				#clock-cells = <1>;
+				clocks = <&xtal>,
+					 <&scmi_clk CLKID_OSC>,
+					 <&scmi_clk CLKID_FIXED_PLL_OSC>,
+					 <&clkc_pll CLKID_FCLK_DIV2>,
+					 <&clkc_pll CLKID_FCLK_DIV2P5>,
+					 <&clkc_pll CLKID_FCLK_DIV3>,
+					 <&clkc_pll CLKID_FCLK_DIV4>,
+					 <&clkc_pll CLKID_FCLK_DIV5>,
+					 <&clkc_pll CLKID_FCLK_DIV7>,
+					 <&clkc_pll CLKID_GP0_PLL>,
+					 <&scmi_clk CLKID_GP1_PLL_OSC>,
+					 <&clkc_pll CLKID_HIFI_PLL>,
+					 <&scmi_clk CLKID_SYS_CLK>,
+					 <&scmi_clk CLKID_AXI_CLK>,
+					 <&scmi_clk CLKID_SYS_PLL_DIV16>,
+					 <&scmi_clk CLKID_CPU_CLK_DIV16>;
+				clock-names = "xtal_24m",
+					      "oscin",
+					      "fix",
+					      "fdiv2",
+					      "fdiv2p5",
+					      "fdiv3",
+					      "fdiv4",
+					      "fdiv5",
+					      "fdiv7",
+					      "gp0",
+					      "gp1",
+					      "hifi",
+					      "sysclk",
+					      "axiclk",
+					      "sysplldiv16",
+					      "cpudiv16";
+			};
+
+			reset: reset-controller@2000 {
+				compatible = "amlogic,c3-reset";
+				reg = <0x0 0x2000 0x0 0x98>;
+				#reset-cells = <1>;
+			};
+
+			watchdog@2100 {
+				compatible = "amlogic,c3-wdt", "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,c3-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x4000 0x0 0x02de>;
+
+				gpio: bank@0 {
+					reg = <0x0 0x0 0x0 0x004c>,
+					      <0x0 0x100 0x0 0x01de>;
+					reg-names = "mux", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 0 55>;
+				};
+
+				i2c0_pins1: i2c0-pins1 {
+					mux {
+						groups = "i2c0_sda_e",
+							 "i2c0_scl_e";
+						function = "i2c0";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c0_pins2: i2c0-pins2 {
+					mux {
+						groups = "i2c0_sda_d",
+							 "i2c0_scl_d";
+						function = "i2c0";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_pins1: i2c1-pins1 {
+					mux {
+						groups = "i2c1_sda_x",
+							 "i2c1_scl_x";
+						function = "i2c1";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_pins2: i2c1-pins2 {
+					mux {
+						groups = "i2c1_sda_d",
+							 "i2c1_scl_d";
+						function = "i2c1";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_pins3: i2c1-pins3 {
+					mux {
+						groups = "i2c1_sda_a",
+							 "i2c1_scl_a";
+						function = "i2c1";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_pins4: i2c1-pins4 {
+					mux {
+						groups = "i2c1_sda_b",
+							 "i2c1_scl_b";
+						function = "i2c1";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c2_pins1: i2c2-pins1 {
+					mux {
+						groups = "i2c2_sda",
+							 "i2c2_scl";
+						function = "i2c2";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c3_pins1: i2c3-pins1 {
+					mux {
+						groups = "i2c3_sda_c",
+							 "i2c3_scl_c";
+						function = "i2c3";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c3_pins2: i2c3-pins2 {
+					mux {
+						groups = "i2c3_sda_x",
+							 "i2c3_scl_x";
+						function = "i2c3";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c3_pins3: i2c3-pins3 {
+					mux {
+						groups = "i2c3_sda_d",
+							 "i2c3_scl_d";
+						function = "i2c3";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				nand_pins: nand-pins {
+					mux {
+						groups = "emmc_nand_d0",
+							 "emmc_nand_d1",
+							 "emmc_nand_d2",
+							 "emmc_nand_d3",
+							 "emmc_nand_d4",
+							 "emmc_nand_d5",
+							 "emmc_nand_d6",
+							 "emmc_nand_d7",
+							 "nand_ce0",
+							 "nand_ale",
+							 "nand_cle",
+							 "nand_wen_clk",
+							 "nand_ren_wr";
+						function = "nand";
+						input-enable;
+					};
+				};
+
+				sdcard_pins: sdcard-pins {
+					mux {
+						groups = "sdcard_d0",
+							 "sdcard_d1",
+							 "sdcard_d2",
+							 "sdcard_d3",
+							 "sdcard_clk",
+							 "sdcard_cmd";
+						function = "sdcard";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdcard_clk_gate_pins: sdcard-clk-cmd-pins {
+					mux {
+						groups = "GPIOC_4";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdio_m_clk_gate_pins: sdio-m-clk-cmd-pins {
+					mux {
+						groups = "sdio_clk";
+						function = "sdio";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdio_m_pins: sdio-m-all-pins {
+					mux {
+						groups = "sdio_d0",
+							 "sdio_d1",
+							 "sdio_d2",
+							 "sdio_d3",
+							 "sdio_clk",
+							 "sdio_cmd";
+						function = "sdio";
+						input-enable;
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				spicc0_pins1: spicc0-pins1 {
+					mux {
+						groups = "spi_a_mosi_b",
+							 "spi_a_miso_b",
+							 "spi_a_clk_b";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins2: spicc0-pins2 {
+					mux {
+						groups = "spi_a_mosi_c",
+							 "spi_a_miso_c",
+							 "spi_a_clk_c";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins3: spicc0-pins3 {
+					mux {
+						groups = "spi_a_mosi_x",
+							 "spi_a_miso_x",
+							 "spi_a_clk_x";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc1_pins1: spicc1-pins1 {
+					mux {
+						groups = "spi_b_mosi_d",
+							 "spi_b_miso_d",
+							 "spi_b_clk_d";
+						function = "spi_b";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc1_pins2: spicc1-pins2 {
+					mux {
+						groups = "spi_b_mosi_x",
+							 "spi_b_miso_x",
+							 "spi_b_clk_x";
+						function = "spi_b";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spifc_pins: spifc-pins {
+					mux {
+						groups = "spif_mo",
+							 "spif_mi",
+							 "spif_clk",
+							 "spif_cs",
+							 "spif_hold",
+							 "spif_wp",
+							 "spif_clk_loop";
+						function = "spif";
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				pwm_a_pins1: pwm-a-pins1 {
+					mux {
+						groups = "pwm_a";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_b_pins1: pwm-b-pins1 {
+					mux {
+						groups = "pwm_b";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_c_pins1: pwm-c-pins1 {
+					mux {
+						groups = "pwm_c";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_d_pins1: pwm-d-pins1 {
+					mux {
+						groups = "pwm_d";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_e_pins1: pwm-e-pins1 {
+					mux {
+						groups = "pwm_e";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_f_pins1: pwm-f-pins1 {
+					mux {
+						groups = "pwm_f";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_g_pins1: pwm-g-pins1 {
+					mux {
+						groups = "pwm_g_b";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_g_pins2: pwm-g-pins2 {
+					mux {
+						groups = "pwm_g_c";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_g_pins3: pwm-g-pins3 {
+					mux {
+						groups = "pwm_g_d";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_g_pins4: pwm-g-pins4 {
+					mux {
+						groups = "pwm_g_x0";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_g_pins5: pwm-g-pins5 {
+					mux {
+						groups = "pwm_g_x8";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_h_pins1: pwm-h-pins1 {
+					mux {
+						groups = "pwm_h_b";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_h_pins2: pwm-h-pins2 {
+					mux {
+						groups = "pwm_h_c";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_h_pins3: pwm-h-pins3 {
+					mux {
+						groups = "pwm_h_d";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_h_pins4: pwm-h-pins4 {
+					mux {
+						groups = "pwm_h_x1";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_h_pins5: pwm-h-pins5 {
+					mux {
+						groups = "pwm_h_x9";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_i_pins1: pwm-i-pins1 {
+					mux {
+						groups = "pwm_i_b";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_i_pins2: pwm-i-pins2 {
+					mux {
+						groups = "pwm_i_c";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_i_pins3: pwm-i-pins3 {
+					mux {
+						groups = "pwm_i_d";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_i_pins4: pwm-i-pins4 {
+					mux {
+						groups = "pwm_i_x2";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_i_pins5: pwm-i-pins5 {
+					mux {
+						groups = "pwm_i_x10";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_j_pins1: pwm-j-pins1 {
+					mux {
+						groups = "pwm_j_c";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_j_pins2: pwm-j-pins2 {
+					mux {
+						groups = "pwm_j_d";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_j_pins3: pwm-j-pins3 {
+					mux {
+						groups = "pwm_j_b";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_j_pins4: pwm-j-pins4 {
+					mux {
+						groups = "pwm_j_x3";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_j_pins5: pwm-j-pins5 {
+					mux {
+						groups = "pwm_j_x12";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_k_pins1: pwm-k-pins1 {
+					mux {
+						groups = "pwm_k_c";
+						function = "pwm_k";
+					};
+				};
+
+				pwm_k_pins2: pwm-k-pins2 {
+					mux {
+						groups = "pwm_k_d";
+						function = "pwm_k";
+					};
+				};
+
+				pwm_k_pins3: pwm-k-pins3 {
+					mux {
+						groups = "pwm_k_b";
+						function = "pwm_k";
+					};
+				};
+
+				pwm_k_pins4: pwm-k-pins4 {
+					mux {
+						groups = "pwm_k_x4";
+						function = "pwm_k";
+					};
+				};
+
+				pwm_k_pins5: pwm-k-pins5 {
+					mux {
+						groups = "pwm_k_x13";
+						function = "pwm_k";
+					};
+				};
+
+				pwm_l_pins1: pwm-l-pins1 {
+					mux {
+						groups = "pwm_l_c";
+						function = "pwm_l";
+					};
+				};
+
+				pwm_l_pins2: pwm-l-pins2 {
+					mux {
+						groups = "pwm_l_x";
+						function = "pwm_l";
+					};
+				};
+
+				pwm_l_pins3: pwm-l-pins3 {
+					mux {
+						groups = "pwm_l_b";
+						function = "pwm_l";
+					};
+				};
+
+				pwm_l_pins4: pwm-l-pins4 {
+					mux {
+						groups = "pwm_l_a";
+						function = "pwm_l";
+					};
+				};
+
+				pwm_m_pins1: pwm-m-pins1 {
+					mux {
+						groups = "pwm_m_c";
+						function = "pwm_m";
+					};
+				};
+
+				pwm_m_pins2: pwm-m-pins2 {
+					mux {
+						groups = "pwm_m_x";
+						function = "pwm_m";
+					};
+				};
+
+				pwm_m_pins3: pwm-m-pins3 {
+					mux {
+						groups = "pwm_m_a";
+						function = "pwm_m";
+					};
+				};
+
+				pwm_m_pins4: pwm-m-pins4 {
+					mux {
+						groups = "pwm_m_b";
+						function = "pwm_m";
+					};
+				};
+
+				pwm_n_pins1: pwm-n-pins1 {
+					mux {
+						groups = "pwm_n_x";
+						function = "pwm_n";
+					};
+				};
+
+				pwm_n_pins2: pwm-n-pins2 {
+					mux {
+						groups = "pwm_n_a";
+						function = "pwm_n";
+					};
+				};
+
+				pwm_n_pins3: pwm-n-pins3 {
+					mux {
+						groups = "pwm_n_b";
+						function = "pwm_n";
+					};
+				};
+			};
+
+			gpio_intc: interrupt-controller@4080 {
+				compatible = "amlogic,c3-gpio-intc", "amlogic,meson-gpio-intc";
+				reg = <0x0 0x4080 0x0 0x0020>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts =
+					<10 11 12 13 14 15 16 17 18 19 20 21>;
+			};
+
+			clkc_pll: clock-controller@8000 {
+				compatible = "amlogic,c3-pll-clkc";
+				reg = <0x0 0x8000 0x0 0x1a4>;
+				#clock-cells = <1>;
+				clocks = <&scmi_clk CLKID_TOP_PLL_OSC>,
+					 <&scmi_clk CLKID_MCLK_PLL_OSC>,
+					 <&scmi_clk CLKID_FIXED_PLL_OSC>;
+				clock-names = "top",
+					      "mclk",
+					      "fix";
+			};
+
+			eth_phy: mdio-multiplexer@28000 {
+				compatible = "amlogic,g12a-mdio-mux";
+				reg = <0x0 0x28000 0x0 0xa4>;
+
+				clocks = <&clkc_periphs CLKID_SYS_ETH_PHY>,
+					 <&xtal>,
+					 <&clkc_pll CLKID_FCLK_50M>;
+				clock-names = "pclk", "clkin0", "clkin1";
+				mdio-parent-bus = <&mdio0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ext_mdio: mdio@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				int_mdio: mdio@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					internal_ephy: ethernet_phy@8 {
+						compatible = "ethernet-phy-id0180.3301",
+							     "ethernet-phy-ieee802.3-c22";
+						interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+						reg = <8>;
+						max-speed = <100>;
+					};
+				};
+			};
+
+			clk_msr: clock-measure@48000 {
+				compatible = "amlogic,c3-clk-measure";
+				reg = <0x0 0x48000 0x0 0x1c>;
+			};
+
+			spicc0: spi@50000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x50000 0x0 0x44>;
+				interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_SYS_SPICC_0>,
+					 <&clkc_periphs CLKID_SPICC_A>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spicc1: spi@52000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x52000 0x0 0x44>;
+				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_SYS_SPICC_1>,
+					 <&clkc_periphs CLKID_SPICC_B>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_mn: pwm@54000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x54000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_M>,
+					 <&clkc_periphs CLKID_PWM_N>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			spifc: spi@56000 {
+				compatible = "amlogic,a1-spifc";
+				reg = <0x0 0x56000 0x0 0x290>;
+				interrupts = <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_SPIFC>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
+			pwm_ab: pwm@58000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x58000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_A>,
+					 <&clkc_periphs CLKID_PWM_B>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@5a000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5a000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_C>,
+					 <&clkc_periphs CLKID_PWM_D>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm@5c000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5c000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_E>,
+					 <&clkc_periphs CLKID_PWM_F>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_gh: pwm@5e000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5e000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_G>,
+					 <&clkc_periphs CLKID_PWM_H>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ij: pwm@60000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x60000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_I>,
+					 <&clkc_periphs CLKID_PWM_J>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_kl: pwm@62000 {
+				compatible = "amlogic,c3-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x62000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_K>,
+					 <&clkc_periphs CLKID_PWM_L>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@66000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x66000 0x0 0x24>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_SYS_I2C_M_A>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@68000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x68000 0x0 0x24>;
+				interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_SYS_I2C_M_B>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@6a000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6a000 0x0 0x24>;
+				interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_SYS_I2C_M_C>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@6c000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6c000 0x0 0x24>;
+				interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_SYS_I2C_M_D>;
+				status = "disabled";
+			};
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,meson-s4-uart",
+					   "amlogic,meson-ao-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				clocks = <&xtal>, <&clkc_periphs CLKID_SYS_UART_B>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+			};
+
+			sec_ao: ao-secure@10220 {
+				compatible = "amlogic,c3-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
+			sdio: mmc@88000 {
+				compatible = "amlogic,meson-axg-mmc";
+				reg = <0x0 0x88000 0x0 0x800>;
+				interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
+				power-domains = <&pwrc PWRC_C3_SDIOA_ID>;
+				clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_A>,
+					  <&clkc_periphs CLKID_SD_EMMC_A>,
+					  <&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core","clkin0", "clkin1";
+				no-mmc;
+				no-sd;
+				resets = <&reset RESET_SD_EMMC_A>;
+				status = "disabled";
+			};
+
+			sd: mmc@8a000 {
+				compatible = "amlogic,meson-axg-mmc";
+				reg = <0x0 0x8a000 0x0 0x800>;
+				interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+				power-domains = <&pwrc PWRC_C3_SDCARD_ID>;
+				clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_B>,
+					<&clkc_periphs CLKID_SD_EMMC_B>,
+					<&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core", "clkin0", "clkin1";
+				no-mmc;
+				no-sdio;
+				resets = <&reset RESET_SD_EMMC_B>;
+				status = "disabled";
+			};
+
+			nand: nand-controller@8d000 {
+				compatible = "amlogic,meson-axg-nfc";
+				reg = <0x0 0x8d000 0x0 0x200>,
+					<0x0 0x8C000 0x0 0x4>;
+				reg-names = "nfc", "emmc";
+				interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_C>,
+					<&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core", "device";
+				status = "disabled";
+			};
+
+			rtc@9a000 {
+				compatible = "amlogic,c3-rtc",
+					     "amlogic,a5-rtc";
+				reg = <0x0 0x9a000 0x0 0x38>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal_32k>, <&clkc_periphs CLKID_SYS_RTC>;
+				clock-names = "osc", "sys";
+			};
+		};
+
+		ethmac: ethernet@fdc00000 {
+			compatible = "amlogic,meson-g12a-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xfdc00000 0x0 0x10000>,
+			      <0x0 0xfe024000 0x0 0x8>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			power-domains = <&pwrc PWRC_C3_ETH_ID>;
+			clocks = <&clkc_periphs CLKID_SYS_ETH_MAC>,
+				 <&clkc_pll CLKID_FCLK_DIV2>,
+				 <&clkc_pll CLKID_FCLK_50M>;
+			clock-names = "stmmaceth", "clkin0", "clkin1";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts b/arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts
new file mode 100644
index 000000000000..c45b22651798
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-s6.dtsi"
+/ {
+	model = "Amlogic S905X5 BL209 Development Board";
+	compatible = "amlogic,bl209", "amlogic,s6";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x000000 0x0 0xe0000000>,
+		      <0x1 0x000000 0x0 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 27 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0x1b00000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi
new file mode 100644
index 000000000000..5f602f1170c0
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@ff200000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xff200000 0 0x10000>,
+			      <0x0 0xff240000 0 0x80000>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,s6-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,pinctrl-s6";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>;
+
+				gpioz: gpio@c0 {
+					reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 16>;
+				};
+
+				gpiox: gpio@100 {
+					reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>;
+				};
+
+				gpioh: gpio@140 {
+					reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 9>;
+				};
+
+				gpiod: gpio@180 {
+					reg = <0 0x180 0 0x20>, <0 0x8 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 7>;
+				};
+
+				gpiof: gpio@1a0 {
+					reg = <0 0x1a0 0 0x20>, <0 0x20 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_F<<8) 5>;
+				};
+
+				gpioe: gpio@1c0 {
+					reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 3>;
+				};
+
+				gpioc: gpio@200 {
+					reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>;
+				};
+
+				gpiob: gpio@240 {
+					reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+				};
+
+				gpioa: gpio@280 {
+					reg = <0 0x280 0 0x20>, <0 0x40 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_A<<8) 16>;
+				};
+
+				test_n: gpio@2c0 {
+					reg = <0 0x2c0 0 0x20>;
+					reg-names = "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges =
+						<&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+				};
+
+				gpiocc: gpio@300 {
+					reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7-s805x3-bp201.dts b/arch/arm64/boot/dts/amlogic/amlogic-s7-s805x3-bp201.dts
new file mode 100644
index 000000000000..7fd4ac9321a6
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7-s805x3-bp201.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-s7.dtsi"
+/ {
+	model = "Amlogic S805X3 BP201 Development Board";
+	compatible = "amlogic,bp201", "amlogic,s7";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 35 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0x2300000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
new file mode 100644
index 000000000000..d262c0b66e4b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>; /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x0100>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,s7-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,pinctrl-s7";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>;
+
+				gpioz: gpio@c0 {
+					reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 13>;
+				};
+
+				gpiox: gpio@100 {
+					reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>;
+				};
+
+				gpioh: gpio@140 {
+					reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 12>;
+				};
+
+				gpiod: gpio@180 {
+					reg = <0 0x180 0 0x20>, <0 0x40 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 12>;
+				};
+
+				gpioe: gpio@1c0 {
+					reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
+				};
+
+				gpioc: gpio@200 {
+					reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>;
+				};
+
+				gpiob: gpio@240 {
+					reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+				};
+
+				test_n: gpio@2c0 {
+					reg = <0 0x2c0 0 0x20>;
+					reg-names = "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges =
+						<&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+				};
+
+				gpiocc: gpio@300 {
+					reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts b/arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts
new file mode 100644
index 000000000000..2933fcdbc8ef
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-s7d.dtsi"
+/ {
+	model = "Amlogic S905X5M BM202 Development Board";
+	compatible = "amlogic,bm202", "amlogic,s7d";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 36 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0x2400000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi
new file mode 100644
index 000000000000..c4d260d5bb58
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x0100>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,s7d-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,pinctrl-s7d",
+					     "amlogic,pinctrl-s7";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>;
+
+				gpioz: gpio@c0 {
+					reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 13>;
+				};
+
+				gpiox: gpio@100 {
+					reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>;
+				};
+
+				gpioh: gpio@140 {
+					reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 12>;
+				};
+
+				gpiod: gpio@180 {
+					reg = <0 0x180 0 0x20>, <0 0x40 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 5>;
+				};
+
+				gpioe: gpio@1c0 {
+					reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
+				};
+
+				gpioc: gpio@200 {
+					reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>;
+				};
+
+				gpiob: gpio@240 {
+					reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+				};
+
+				gpiodv: gpio@280 {
+					reg = <0 0x280 0 0x20>, <0 0x8 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_DV<<8) 7>;
+				};
+
+				test_n: gpio@2c0 {
+					reg = <0 0x2c0 0 0x20>;
+					reg-names = "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges =
+						<&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+				};
+
+				gpiocc: gpio@300 {
+					reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-an400.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-an400.dts
new file mode 100644
index 000000000000..c05edebb90b5
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-an400.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-t7.dtsi"
+
+/ {
+	model = "Amlogic A311D2 AN400 Development Board";
+	compatible = "amlogic,an400", "amlogic,a311d2", "amlogic,t7";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_a;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0xE0000000
+			0x00000001 0x00000000 0x00000000 0x20000000>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+};
+
+&uart_a {
+	clocks = <&xtal>, <&xtal>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
new file mode 100644
index 000000000000..fffdab96b12e
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Wesion, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-t7.dtsi"
+
+/ {
+	model = "Khadas vim4";
+	compatible = "khadas,vim4", "amlogic,a311d2", "amlogic,t7";
+
+	aliases {
+		serial0 = &uart_a;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x2 0x0>; /* 8 GB */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 3 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x300000>;
+			no-map;
+		};
+
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+};
+
+&uart_a {
+	status = "okay";
+	clocks = <&xtal>, <&xtal>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-reset.h b/arch/arm64/boot/dts/amlogic/amlogic-t7-reset.h
new file mode 100644
index 000000000000..ec90a11df508
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-reset.h
@@ -0,0 +1,197 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __DTS_AMLOGIC_T7_RESET_H
+#define __DTS_AMLOGIC_T7_RESET_H
+
+/* RESET0 */
+/*					0-3	*/
+#define RESET_USB			4
+#define RESET_U2DRD			5
+#define RESET_U3DRD			6
+#define RESET_U3DRD_PIPE0		7
+#define RESET_U2PHY20			8
+#define RESET_U2PHY21			9
+#define RESET_GDC			10
+#define RESET_HDMI20_AES		11
+#define RESET_HDMIRX			12
+#define RESET_HDMIRX_APB		13
+#define RESET_DEWARP			14
+/*					15	*/
+#define RESET_HDMITX_CAPB3		16
+#define RESET_BRG_VCBUG_DEC		17
+#define RESET_VCBUS			18
+#define RESET_VID_PLL_DIV		19
+#define RESET_VDI6			20
+#define RESET_GE2D			21
+#define RESET_HDMITXPHY			22
+#define RESET_VID_LOCK			23
+#define RESET_VENC0			24
+#define RESET_VDAC			25
+#define RESET_VENC2			26
+#define RESET_VENC1			27
+#define RESET_RDMA			28
+#define RESET_HDMITX			29
+#define RESET_VIU			30
+#define RESET_VENC			31
+
+/* RESET1 */
+#define RESET_AUDIO			32
+#define RESET_MALI_CAPB3		33
+#define RESET_MALI			34
+#define RESET_DDR_APB			35
+#define RESET_DDR			36
+#define RESET_DOS_CAPB3			37
+#define RESET_DOS			38
+#define RESET_COMBO_DPHY_CHAN2		39
+#define RESET_DEBUG_B			40
+#define RESET_DEBUG_A			41
+#define RESET_DSP_B			42
+#define RESET_DSP_A			43
+#define RESET_PCIE_A			44
+#define RESET_PCIE_PHY			45
+#define RESET_PCIE_APB			46
+#define RESET_ANAKIN			47
+#define RESET_ETH			48
+#define RESET_EDP0_CTRL			49
+#define RESET_EDP1_CTRL			50
+#define RESET_COMBO_DPHY_CHAN0		51
+#define RESET_COMBO_DPHY_CHAN1		52
+#define RESET_DSI_LVDS_EDP_TOP		53
+#define RESET_PCIE1_PHY			54
+#define RESET_PCIE1_APB			55
+#define RESET_DDR_1			56
+/*					57	*/
+#define RESET_EDP1_PIPELINE		58
+#define RESET_EDP0_PIPELINE		59
+#define RESET_MIPI_DSI1_PHY		60
+#define RESET_MIPI_DSI0_PHY		61
+#define RESET_MIPI_DSI_A_HOST		62
+#define RESET_MIPI_DSI_B_HOST		63
+
+/* RESET2 */
+#define RESET_DEVICE_MMC_ARB		64
+#define RESET_IR_CTRL			65
+#define RESET_TS_A73			66
+#define RESET_TS_A53			67
+#define RESET_SPICC_2			68
+#define RESET_SPICC_3			69
+#define RESET_SPICC_4			70
+#define RESET_SPICC_5			71
+#define RESET_SMART_CARD		72
+#define RESET_SPICC_0			73
+#define RESET_SPICC_1			74
+#define RESET_RSA			75
+/*					76-79	*/
+#define RESET_MSR_CLK			80
+#define RESET_SPIFC			81
+#define RESET_SAR_ADC			82
+#define RESET_BT			83
+/*					84-87	*/
+#define RESET_ACODEC			88
+#define RESET_CEC			89
+#define RESET_AFIFO			90
+#define RESET_WATCHDOG			91
+/*					92-95	*/
+
+/* RESET3 */
+#define RESET_BRG_NIC1_GPV		96
+#define RESET_BRG_NIC2_GPV		97
+#define RESET_BRG_NIC3_GPV		98
+#define RESET_BRG_NIC4_GPV		99
+#define RESET_BRG_NIC5_GPV		100
+/*					101-121	*/
+#define RESET_MIPI_ISP			122
+#define RESET_BRG_ADB_MALI_1		123
+#define RESET_BRG_ADB_MALI_0		124
+#define RESET_BRG_ADB_A73		125
+#define RESET_BRG_ADB_A53		126
+#define RESET_BRG_CCI			127
+
+/* RESET4 */
+#define RESET_PWM_AO_AB			128
+#define RESET_PWM_AO_CD			129
+#define RESET_PWM_AO_EF			130
+#define RESET_PWM_AO_GH			131
+#define RESET_PWM_AB			132
+#define RESET_PWM_CD			133
+#define RESET_PWM_EF			134
+/*					135-137	*/
+#define RESET_UART_A			138
+#define RESET_UART_B			139
+#define RESET_UART_C			140
+#define RESET_UART_D			141
+#define RESET_UART_E			142
+#define RESET_UART_F			143
+#define RESET_I2C_S_A			144
+#define RESET_I2C_M_A			145
+#define RESET_I2C_M_B			146
+#define RESET_I2C_M_C			147
+#define RESET_I2C_M_D			148
+#define RESET_I2C_M_E			149
+#define RESET_I2C_M_F			150
+#define RESET_I2C_M_AO_A		151
+#define RESET_SD_EMMC_A			152
+#define RESET_SD_EMMC_B			153
+#define RESET_SD_EMMC_C			154
+#define RESET_I2C_M_AO_B		155
+#define RESET_TS_GPU			156
+#define RESET_TS_NNA			157
+#define RESET_TS_VPN			158
+#define RESET_TS_HEVC			159
+
+/* RESET5 */
+#define RESET_BRG_NOC_DDR_1		160
+#define RESET_BRG_NOC_DDR_0		161
+#define RESET_BRG_NOC_MAIN		162
+#define RESET_BRG_NOC_ALL		163
+/*					164-167	*/
+#define RESET_BRG_NIC2_SYS		168
+#define RESET_BRG_NIC2_MAIN		169
+#define RESET_BRG_NIC2_HDMI		170
+#define RESET_BRG_NIC2_ALL		171
+#define RESET_BRG_NIC3_WAVE		172
+#define RESET_BRG_NIC3_VDEC		173
+#define RESET_BRG_NIC3_HEVCF		174
+#define RESET_BRG_NIC3_HEVCB		175
+#define RESET_BRG_NIC3_HCODEC		176
+#define RESET_BRG_NIC3_GE2D		177
+#define RESET_BRG_NIC3_GDC		178
+#define RESET_BRG_NIC3_AMLOGIC		179
+#define RESET_BRG_NIC3_MAIN		180
+#define RESET_BRG_NIC3_ALL		181
+#define RESET_BRG_NIC5_VPU		182
+/*					183-185	*/
+#define RESET_BRG_NIC4_DSPB		186
+#define RESET_BRG_NIC4_DSPA		187
+#define RESET_BRG_NIC4_VAPB		188
+#define RESET_BRG_NIC4_CLK81		189
+#define RESET_BRG_NIC4_MAIN		190
+#define RESET_BRG_NIC4_ALL		191
+
+/* RESET6 */
+#define RESET_BRG_VDEC_PIPEL		192
+#define RESET_BRG_HEVCF_DMC_PIPEL	193
+#define RESET_BRG_NIC2TONIC4_PIPEL	194
+#define RESET_BRG_HDMIRXTONIC2_PIPEL	195
+#define RESET_BRG_SECTONIC4_PIPEL	196
+#define RESET_BRG_VPUTONOC_PIPEL	197
+#define RESET_BRG_NIC4TONOC_PIPEL	198
+#define RESET_BRG_NIC3TONOC_PIPEL	199
+#define RESET_BRG_NIC2TONOC_PIPEL	200
+#define RESET_BRG_NNATONOC_PIPEL	201
+#define RESET_BRG_FRISP3_PIPEL		202
+#define RESET_BRG_FRISP2_PIPEL		203
+#define RESET_BRG_FRISP1_PIPEL		204
+#define RESET_BRG_FRISP0_PIPEL		205
+/*					206-217	*/
+#define RESET_BRG_AMPIPE_NAND		218
+#define RESET_BRG_AMPIPE_ETH		219
+/*					220	*/
+#define RESET_BRG_AM2AXI0		221
+#define RESET_BRG_AM2AXI1		222
+#define RESET_BRG_AM2AXI2		223
+
+#endif /* ___DTS_AMLOGIC_T7_RESET_H */
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
new file mode 100644
index 000000000000..6510068bcff9
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/amlogic,t7-pwrc.h>
+#include "amlogic-t7-reset.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu100>;
+				};
+				core1 {
+					cpu = <&cpu101>;
+				};
+				core2 {
+					cpu = <&cpu102>;
+				};
+				core3 {
+					cpu = <&cpu103>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu100: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
+		};
+
+		cpu101: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
+		};
+
+		cpu102: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
+		};
+
+		cpu103: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
+		};
+
+		l2_cache_l: l2-cache-cluster0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;  /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+
+		l2_cache_b: l2-cache-cluster1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>; /* L2. 1 Mb */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,t7-pwrc";
+			#power-domain-cells = <1>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x0100>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apb4: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			reset: reset-controller@2000 {
+				compatible = "amlogic,t7-reset";
+				reg = <0x0 0x2000 0x0 0x98>;
+				#reset-cells = <1>;
+			};
+
+			watchdog@2100 {
+				compatible = "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,t7-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@4000 {
+					reg = <0x0 0x4000 0x0 0x0064>,
+					      <0x0 0x40c0 0x0 0x0220>;
+					reg-names = "mux", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 0 157>;
+				};
+			};
+
+			gpio_intc: interrupt-controller@4080 {
+				compatible = "amlogic,t7-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0x4080 0x0 0x20>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts =
+					<10 11 12 13 14 15 16 17 18 19 20 21>;
+			};
+
+			uart_a: serial@78000 {
+				compatible = "amlogic,t7-uart", "amlogic,meson-s4-uart";
+				reg = <0x0 0x78000 0x0 0x18>;
+				interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			sec_ao: ao-secure@10220 {
+				compatible = "amlogic,t7-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts
new file mode 100644
index 000000000000..0d92f5253b64
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 SberDevices
+ * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
+ */
+
+/dts-v1/;
+
+#include "meson-a1.dtsi"
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "amlogic,ad402", "amlogic,a1";
+	model = "Amlogic Meson A1 AD402 Development Board";
+
+	aliases {
+		serial0 = &uart_AO_B;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x8000000>;
+	};
+
+	reserved-memory {
+		/* 3 MiB reserved for Amlogic Trust OS (BL32) */
+		secos_reserved: secos@3d00000 {
+			reg = <0x0 0x03d00000 0x0 0x300000>;
+			no-map;
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	battery_4v2: regulator-battery-4v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "4V2";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+	};
+
+	vddq_1v35: regulator-vddq-1v35 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDQ_1V35";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		vin-supply = <&battery_4v2>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&battery_4v2>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddio_1v8: regulator-vddio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			sustainable-power = <130>;
+
+			thermal-sensors = <&cpu_temp>;
+
+			trips {
+				soc_passive: soc-passive {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_hot: soc-hot {
+					temperature = <85000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				soc_critical: soc-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			soc_cooling_maps: cooling-maps {
+				map0 {
+					trip = <&soc_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&soc_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+/* Bluetooth HCI H4 */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+};
+
+&uart_AO_B {
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_1v8>;
+};
+
+&spifc {
+	status = "okay";
+	pinctrl-0 = <&spifc_pins>;
+	pinctrl-names = "default";
+
+	flash@0 {
+		compatible = "spi-nand";
+		status = "okay";
+		reg = <0>;
+		spi-max-frequency = <96000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&vcc_3v3>;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&sd_emmc {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_1v8>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index b4000cf65a9a..27b68ed85c4c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -3,9 +3,13 @@
  * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
  */
 
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
 #include <dt-bindings/gpio/meson-a1-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/meson-a1-power.h>
+#include <dt-bindings/reset/amlogic,meson-a1-reset.h>
 
 / {
 	compatible = "amlogic,a1";
@@ -23,7 +27,14 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -31,14 +42,35 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
 		};
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		clocks = <&clkc_periphs CLKID_OTP>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		secure-monitor = <&sm>;
+		power-domains = <&pwrc PWRC_OTP_ID>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -64,7 +96,6 @@
 		pwrc: power-controller {
 			compatible = "amlogic,meson-a1-pwrc";
 			#power-domain-cells = <1>;
-			status = "okay";
 		};
 	};
 
@@ -74,6 +105,16 @@
 		#size-cells = <2>;
 		ranges;
 
+		spifc: spi@fd000400 {
+			compatible = "amlogic,a1-spifc";
+			reg = <0x0 0xfd000400 0x0 0x290>;
+			clocks = <&clkc_periphs CLKID_SPIFC>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&pwrc PWRC_SPIFC_ID>;
+			status = "disabled";
+		};
+
 		apb: bus@fe000000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xfe000000 0x0 0x1000000>;
@@ -81,7 +122,6 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
 
-
 			reset: reset-controller@0 {
 				compatible = "amlogic,meson-a1-reset";
 				reg = <0x0 0x0 0x0 0x8c>;
@@ -103,10 +143,383 @@
 					gpio-ranges = <&periphs_pinctrl 0 0 62>;
 				};
 
+				i2c0_f11_pins: i2c0-f11 {
+					mux {
+						groups = "i2c0_sck_f11",
+							 "i2c0_sda_f12";
+						function = "i2c0";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c0_f9_pins: i2c0-f9 {
+					mux {
+						groups = "i2c0_sck_f9",
+							 "i2c0_sda_f10";
+						function = "i2c0";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_x_pins: i2c1-x {
+					mux {
+						groups = "i2c1_sck_x",
+							 "i2c1_sda_x";
+						function = "i2c1";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_a_pins: i2c1-a {
+					mux {
+						groups = "i2c1_sck_a",
+							 "i2c1_sda_a";
+						function = "i2c1";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c2_x0_pins: i2c2-x0 {
+					mux {
+						groups = "i2c2_sck_x0",
+							 "i2c2_sda_x1";
+						function = "i2c2";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c2_x15_pins: i2c2-x15 {
+					mux {
+						groups = "i2c2_sck_x15",
+							 "i2c2_sda_x16";
+						function = "i2c2";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c2_a4_pins: i2c2-a4 {
+					mux {
+						groups = "i2c2_sck_a4",
+							 "i2c2_sda_a5";
+						function = "i2c2";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c2_a8_pins: i2c2-a8 {
+					mux {
+						groups = "i2c2_sck_a8",
+							 "i2c2_sda_a9";
+						function = "i2c2";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c3_x_pins: i2c3-x {
+					mux {
+						groups = "i2c3_sck_x",
+							 "i2c3_sda_x";
+						function = "i2c3";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c3_f_pins: i2c3-f {
+					mux {
+						groups = "i2c3_sck_f",
+							 "i2c3_sda_f";
+						function = "i2c3";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				uart_a_pins: uart-a {
+					mux {
+						groups = "uart_a_tx",
+							 "uart_a_rx";
+						function = "uart_a";
+						bias-pull-up;
+					};
+				};
+
+				uart_a_cts_rts_pins: uart-a-cts-rts {
+					mux {
+						groups = "uart_a_cts",
+							 "uart_a_rts";
+						function = "uart_a";
+						bias-pull-down;
+					};
+				};
+
+				pwm_a_pins1: pwm-a-pins1 {
+					mux {
+						groups = "pwm_a_x6";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins2: pwm-a-pins2 {
+					mux {
+						groups = "pwm_a_x7";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins3: pwm-a-pins3 {
+					mux {
+						groups = "pwm_a_f10";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins4: pwm-a-pins4 {
+					mux {
+						groups = "pwm_a_f6";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins5: pwm-a-pins5 {
+					mux {
+						groups = "pwm_a_a";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_b_pins1: pwm-b-pins1 {
+					mux {
+						groups = "pwm_b_x";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_b_pins2: pwm-b-pins2 {
+					mux {
+						groups = "pwm_b_f";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_b_pins3: pwm-b-pins3 {
+					mux {
+						groups = "pwm_b_a";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_c_pins1: pwm-c-pins1 {
+					mux {
+						groups = "pwm_c_x";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_c_pins2: pwm-c-pins2 {
+					mux {
+						groups = "pwm_c_f3";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_c_pins3: pwm-c-pins3 {
+					mux {
+						groups = "pwm_c_f8";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_c_pins4: pwm-c-pins4 {
+					mux {
+						groups = "pwm_c_a";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_d_pins1: pwm-d-pins1 {
+					mux {
+						groups = "pwm_d_x15";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_d_pins2: pwm-d-pins2 {
+					mux {
+						groups = "pwm_d_x13";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_d_pins3: pwm-d-pins3 {
+					mux {
+						groups = "pwm_d_x10";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_d_pins4: pwm-d-pins4 {
+					mux {
+						groups = "pwm_d_f";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_e_pins1: pwm-e-pins1 {
+					mux {
+						groups = "pwm_e_p";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins2: pwm-e-pins2 {
+					mux {
+						groups = "pwm_e_x16";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins3: pwm-e-pins3 {
+					mux {
+						groups = "pwm_e_x14";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins4: pwm-e-pins4 {
+					mux {
+						groups = "pwm_e_x2";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins5: pwm-e-pins5 {
+					mux {
+						groups = "pwm_e_f";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins6: pwm-e-pins6 {
+					mux {
+						groups = "pwm_e_a";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_f_pins1: pwm-f-pins1 {
+					mux {
+						groups = "pwm_f_b";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_f_pins2: pwm-f-pins2 {
+					mux {
+						groups = "pwm_f_x";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_f_pins3: pwm-f-pins3 {
+					mux {
+						groups = "pwm_f_f4";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_f_pins4: pwm-f-pins4 {
+					mux {
+						groups = "pwm_f_f12";
+						function = "pwm_f";
+					};
+				};
+
+				sdio_pins: sdio {
+					mux0 {
+						groups = "sdcard_d0_x",
+							 "sdcard_d1_x",
+							 "sdcard_d2_x",
+							 "sdcard_d3_x",
+							 "sdcard_cmd_x";
+						function = "sdcard";
+						bias-pull-up;
+					};
+
+					mux1 {
+						groups = "sdcard_clk_x";
+						function = "sdcard";
+						bias-disable;
+					};
+				};
+
+				sdio_clk_gate_pins: sdio-clk-gate {
+					mux {
+						groups = "sdcard_clk_x";
+						function = "sdcard";
+						bias-pull-down;
+					};
+				};
+
+				spifc_pins: spifc {
+					mux {
+						groups = "spif_mo",
+							 "spif_mi",
+							 "spif_clk",
+							 "spif_cs",
+							 "spif_hold_n",
+							 "spif_wp_n";
+						function = "spif";
+					};
+				};
+			};
+
+			gpio_intc: interrupt-controller@440 {
+				compatible = "amlogic,meson-a1-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0x0440 0x0 0x14>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts =
+					<49 50 51 52 53 54 55 56>;
+			};
+
+			clkc_periphs: clock-controller@800 {
+				compatible = "amlogic,a1-peripherals-clkc";
+				reg = <0 0x800 0 0x104>;
+				#clock-cells = <1>;
+				clocks = <&clkc_pll CLKID_FCLK_DIV2>,
+					 <&clkc_pll CLKID_FCLK_DIV3>,
+					 <&clkc_pll CLKID_FCLK_DIV5>,
+					 <&clkc_pll CLKID_FCLK_DIV7>,
+					 <&clkc_pll CLKID_HIFI_PLL>,
+					 <&xtal>;
+				clock-names = "fclk_div2", "fclk_div3",
+					      "fclk_div5", "fclk_div7",
+					      "hifi_pll", "xtal";
+			};
+
+			i2c0: i2c@1400 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1400 0x0 0x20>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_I2C_M_A>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
 			};
 
 			uart_AO: serial@1c00 {
-				compatible = "amlogic,meson-gx-uart",
+				compatible = "amlogic,meson-a1-uart",
 					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x1c00 0x0 0x18>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
@@ -116,7 +529,7 @@
 			};
 
 			uart_AO_B: serial@2000 {
-				compatible = "amlogic,meson-gx-uart",
+				compatible = "amlogic,meson-a1-uart",
 					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x2000 0x0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
@@ -124,6 +537,196 @@
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
+
+			pwm_ab: pwm@2400 {
+				compatible = "amlogic,meson-a1-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x2400 0x0 0x24>;
+				#pwm-cells = <3>;
+				clocks = <&clkc_periphs CLKID_PWM_A>,
+					 <&clkc_periphs CLKID_PWM_B>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@2800 {
+				compatible = "amlogic,meson-a1-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x2800 0x0 0x24>;
+				#pwm-cells = <3>;
+				clocks = <&clkc_periphs CLKID_PWM_C>,
+					 <&clkc_periphs CLKID_PWM_D>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+				status = "disabled";
+			};
+
+			saradc: adc@2c00 {
+				compatible = "amlogic,meson-g12a-saradc",
+					"amlogic,meson-saradc";
+				reg = <0x0 0x2c00 0x0 0x48>;
+				#io-channel-cells = <1>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>,
+					<&clkc_periphs CLKID_SARADC_EN>,
+					<&clkc_periphs CLKID_SARADC>,
+					<&clkc_periphs CLKID_SARADC_SEL>;
+				clock-names = "clkin", "core",
+					"adc_clk", "adc_sel";
+				status = "disabled";
+			};
+
+			i2c1: i2c@5c00 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x5c00 0x0 0x20>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_I2C_M_B>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+			};
+
+			i2c2: i2c@6800 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x6800 0x0 0x20>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_I2C_M_C>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+			};
+
+			i2c3: i2c@6c00 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x6c00 0x0 0x20>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_I2C_M_D>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+			};
+
+			usb2_phy1: phy@4000 {
+				compatible = "amlogic,a1-usb2-phy";
+				clocks = <&clkc_periphs CLKID_USB_PHY_IN>;
+				clock-names = "xtal";
+				reg = <0x0 0x4000 0x0 0x60>;
+				resets = <&reset RESET_USBPHY>;
+				reset-names = "phy";
+				#phy-cells = <0>;
+				power-domains = <&pwrc PWRC_USB_ID>;
+			};
+
+			cpu_temp: temperature-sensor@4c00 {
+				compatible = "amlogic,a1-cpu-thermal";
+				reg = <0x0 0x4c00 0x0 0x50>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_TS>;
+				assigned-clocks = <&clkc_periphs CLKID_TS>;
+				assigned-clock-rates = <500000>;
+				#thermal-sensor-cells = <0>;
+				amlogic,ao-secure = <&sec_AO>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+			};
+
+			hwrng: rng@5118 {
+				compatible = "amlogic,meson-rng";
+				reg = <0x0 0x5118 0x0 0x4>;
+				power-domains = <&pwrc PWRC_OTP_ID>;
+			};
+
+			sec_AO: ao-secure@5a20 {
+				compatible = "amlogic,meson-gx-ao-secure", "syscon";
+				reg = <0x0 0x5a20 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
+			pwm_ef: pwm@5400 {
+				compatible = "amlogic,meson-a1-pwm",
+					     "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5400 0x0 0x24>;
+				#pwm-cells = <3>;
+				clocks = <&clkc_periphs CLKID_PWM_E>,
+					 <&clkc_periphs CLKID_PWM_F>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+				status = "disabled";
+			};
+
+			clkc_pll: pll-clock-controller@7c80 {
+				compatible = "amlogic,a1-pll-clkc";
+				reg = <0 0x7c80 0 0x18c>;
+				#clock-cells = <1>;
+				clocks = <&clkc_periphs CLKID_FIXPLL_IN>,
+					 <&clkc_periphs CLKID_HIFIPLL_IN>;
+				clock-names = "fixpll_in", "hifipll_in";
+			};
+
+			sd_emmc: mmc@10000 {
+				compatible = "amlogic,meson-axg-mmc";
+				reg = <0x0 0x10000 0x0 0x800>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_SD_EMMC_A>,
+					 <&clkc_periphs CLKID_SD_EMMC>,
+					 <&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core",
+					      "clkin0",
+					      "clkin1";
+				assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_SEL2>;
+				assigned-clock-parents = <&xtal>;
+				resets = <&reset RESET_SD_EMMC_A>;
+				power-domains = <&pwrc PWRC_SD_EMMC_ID>;
+				status = "disabled";
+			};
+		};
+
+		usb: usb@fe004400 {
+			status = "disabled";
+			compatible = "amlogic,meson-a1-usb-ctrl";
+			reg = <0x0 0xfe004400 0x0 0xa0>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&clkc_periphs CLKID_USB_CTRL>,
+				 <&clkc_periphs CLKID_USB_BUS>,
+				 <&clkc_periphs CLKID_USB_CTRL_IN>;
+			clock-names = "usb_ctrl", "usb_bus", "xtal_usb_ctrl";
+			assigned-clocks = <&clkc_periphs CLKID_USB_BUS>;
+			assigned-clock-rates = <64000000>;
+			resets = <&reset RESET_USBCTRL>;
+
+			dr_mode = "otg";
+
+			phys = <&usb2_phy1>;
+			phy-names = "usb2-phy1";
+
+			dwc3: usb@ff400000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff400000 0x0 0x100000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,dis_u2_susphy_quirk;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,parkmode-disable-ss-quirk;
+			};
+
+			dwc2: usb@ff500000 {
+				compatible = "amlogic,meson-a1-usb", "snps,dwc2";
+				reg = <0x0 0xff500000 0x0 0x40000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy1>;
+				phy-names = "usb2-phy";
+				clocks = <&clkc_periphs CLKID_USB_PHY>;
+				clock-names = "otg";
+				dr_mode = "peripheral";
+				g-rx-fifo-size = <192>;
+				g-np-tx-fifo-size = <128>;
+				g-tx-fifo-size = <128 128 16 16 16>;
+			};
 		};
 
 		gic: interrupt-controller@ff901000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
index 8b0d586aa84e..b2d6ba660914 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
@@ -1,270 +1,29 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in>
- * Copyright (c) 2020 JetHome
- * Author: Aleksandr Kazantsev <ak@tvip.ru>
- * Author: Alexey Shevelkin <ash@tvip.ru>
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in>
+ * Copyright (c) 2022 JetHome
  * Author: Vyacheslav Bocharov <adeep@lexina.in>
  */
 
 /dts-v1/;
 
-#include "meson-axg.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
+#include "meson-axg-jethome-jethub-j1xx.dtsi"
 
 / {
 	compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg";
-	model = "JetHome JetHub J100";
-	aliases {
-		serial0 = &uart_AO;   /* Console */
-		serial2 = &uart_AO_B; /* External UART (Wireless Module) */
-		ethernet0 = &ethmac;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
+	model = "JetHome JetHub D1 (J100)";
 
 	/* 1024MB RAM */
 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
-
-	reserved-memory {
-		linux,cma {
-			size = <0x0 0x400000>;
-		};
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
-	};
-
-	vcc_3v3: regulator-vcc_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-	};
-
-	vcc_5v: regulator-vcc_5v {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	vddao_3v3: regulator-vddao_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDAO_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_5v>;
-		regulator-always-on;
-	};
-
-	vddio_ao18: regulator-vddio_ao18 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-	};
-
-	vddio_boot: regulator-vddio_boot {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_BOOT";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-	};
-
-	vccq_1v8: regulator-vccq_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCCQ_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-	};
-
-	usb_pwr: regulator-usb_pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "USB_PWR";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc_5v>;
-		regulator-always-on;
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
-		clocks = <&wifi32k>;
-		clock-names = "ext_clock";
-	};
-
-	wifi32k: wifi32k {
-		compatible = "pwm-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-			thermal-sensors = <&scpi_sensors 0>;
-			trips {
-				cpu_passive: cpu-passive {
-					temperature = <70000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "passive";
-				};
-
-				cpu_hot: cpu-hot {
-					temperature = <80000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "hot";
-				};
-
-				cpu_critical: cpu-critical {
-					temperature = <100000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "critical";
-				};
-			};
-
-			cpu_cooling_maps: cooling-maps {
-				map0 {
-					trip = <&cpu_passive>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-
-				map1 {
-					trip = <&cpu_hot>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-	};
-
-	onewire {
-		compatible = "w1-gpio";
-		gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>;
-		#gpio-cells = <1>;
-	};
-};
-
-&efuse {
-	sn: sn@32 {
-		reg = <0x32 0x20>;
-	};
-
-	eth_mac: eth_mac@0 {
-		reg = <0x0 0x6>;
-	};
-
-	bt_mac: bt_mac@6 {
-		reg = <0x6 0x6>;
-	};
-
-	wifi_mac: wifi_mac@c {
-		reg = <0xc 0x6>;
-	};
-
-	bid: bid@12 {
-		reg = <0x12 0x20>;
-	};
-};
-
-&ethmac {
-	status = "okay";
-	pinctrl-0 = <&eth_rmii_x_pins>;
-	pinctrl-names = "default";
-	phy-handle = <&eth_phy0>;
-	phy-mode = "rmii";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */
-		eth_phy0: ethernet-phy@0 {
-			/* compatible = "ethernet-phy-id0243.0c54";*/
-			max-speed = <100>;
-			reg = <0>;
-
-			reset-assert-us = <10000>;
-			reset-deassert-us = <10000>;
-			reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-/* Internal I2C bus (on CPU module) */
-&i2c1 {
-	status = "okay";
-	pinctrl-0 = <&i2c1_z_pins>;
-	pinctrl-names = "default";
-
-	/* RTC */
-	pcf8563: pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-		status = "okay";
-	};
 };
 
-/* Peripheral I2C bus (on motherboard) */
-&i2c_AO {
-	status = "okay";
-	pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
-	pinctrl-names = "default";
-};
-
-&pwm_ab {
-	status = "okay";
-	pinctrl-0 = <&pwm_a_x20_pins>;
-	pinctrl-names = "default";
-};
 
 /* wifi module */
 &sd_emmc_b {
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	pinctrl-0 = <&sdio_pins>;
-	pinctrl-1 = <&sdio_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	max-frequency = <50000000>;
 	non-removable;
-	disable-wp;
-
-	mmc-pwrseq = <&sdio_pwrseq>;
-
-	vmmc-supply = <&vddao_3v3>;
-	vqmmc-supply = <&vddio_boot>;
 
 	brcmf: wifi@1 {
 		reg = <1>;
@@ -272,99 +31,10 @@
 	};
 };
 
-/* emmc storage */
-&sd_emmc_c {
-	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
-	pinctrl-1 = <&emmc_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	max-frequency = <200000000>;
-	non-removable;
-	disable-wp;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-
-	mmc-pwrseq = <&emmc_pwrseq>;
-
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vccq_1v8>;
-};
-
 /* UART Bluetooth */
 &uart_B {
-	status = "okay";
-	pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
 	};
 };
-
-/* UART Console */
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-/* UART Wireless module */
-&uart_AO_B {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_b_pins>;
-	pinctrl-names = "default";
-};
-
-&usb {
-	status = "okay";
-	phy-supply = <&usb_pwr>;
-};
-
-&spicc1 {
-	status = "okay";
-	pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>;
-	pinctrl-names = "default";
-};
-
-&gpio {
-	gpio-line-names =
-		"", "", "", "", "", // 0 - 4
-		"", "", "", "", "", // 5 - 9
-		"UserButton", "", "", "", "", // 10 - 14
-		"", "", "", "", "", // 15 - 19
-		"", "", "", "", "", // 20 - 24
-		"", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29
-		"Output1", "", "", "", "", // 30 - 34
-		"", "ZigBeeBOOT", "", "", "", // 35 - 39
-		"1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44
-		"Input2", "Input1", "", "", "", // 45 - 49
-		"", "", "", "", "", // 50 - 54
-		"", "", "", "", "", // 55 - 59
-		"", "", "", "", "", // 60 - 64
-		"", "", "", "", "", // 65 - 69
-		"", "", "", "", "", // 70 - 74
-		"", "", "", "", "", // 75 - 79
-		"", "", "", "", "", // 80 - 84
-		"", ""; // 85-86
-};
-
-&cpu0 {
-	#cooling-cells = <2>;
-};
-
-&cpu1 {
-	#cooling-cells = <2>;
-};
-
-&cpu2 {
-	#cooling-cells = <2>;
-};
-
-&cpu3 {
-	#cooling-cells = <2>;
-};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
new file mode 100644
index 000000000000..8a18ce948450
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in>
+ * Copyright (c) 2022 JetHome
+ * Author: Vyacheslav Bocharov <adeep@lexina.in>
+ */
+
+/dts-v1/;
+
+#include "meson-axg-jethome-jethub-j1xx.dtsi"
+
+/ {
+	compatible = "jethome,jethub-j110", "amlogic,a113d", "amlogic,meson-axg";
+	model = "JetHome JetHub D1p (J110) HW rev.2";
+
+	/* 2GiB or 4GiB RAM */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+
+/* wifi module */
+&sd_emmc_b {
+	broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
+};
+
+/* UART Bluetooth */
+&uart_B {
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c_AO {
+	/* EEPROM on base board */
+	eeprompd: eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <0x20>;
+		label = "eeprompd";
+		address-width = <0x10>;
+		vcc-supply = <&vddao_3v3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
new file mode 100644
index 000000000000..c356bd2cc63a
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in>
+ * Copyright (c) 2022 JetHome
+ * Author: Vyacheslav Bocharov <adeep@lexina.in>
+ */
+
+/dts-v1/;
+
+#include "meson-axg-jethome-jethub-j1xx.dtsi"
+
+/ {
+	compatible = "jethome,jethub-j110", "amlogic,a113d", "amlogic,meson-axg";
+	model = "JetHome JetHub D1p (J110) Hw rev.3";
+
+	/* 2GiB or 4GiB RAM */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+
+/* wifi module */
+&sd_emmc_b {
+	broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
+};
+
+&i2c_AO {
+	/* EEPROM on base board */
+	eeprompd: eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <0x20>;
+		label = "eeprompd";
+		address-width = <0x10>;
+		vcc-supply = <&vddao_3v3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
new file mode 100644
index 000000000000..9b65ae818e2f
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in>
+ * Copyright (c) 2022 JetHome
+ * Author: Vyacheslav Bocharov <adeep@lexina.in>
+ * Author: Aleksandr Kazantsev <ak@tvip.ru>
+ * Author: Alexey Shevelkin <ash@tvip.ru>
+ */
+
+/dts-v1/;
+
+#include "meson-axg.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;   /* Console */
+		serial2 = &uart_AO_B; /* External UART (Wireless Module) */
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		linux,cma {
+			size = <0x0 0x400000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v>;
+		regulator-always-on;
+	};
+
+	vddio_ao18: regulator-vddio-ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio-boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vccq_1v8: regulator-vccq-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCQ_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	usb_pwr: regulator-usb-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&scpi_sensors 0>;
+			trips {
+				cpu_passive: cpu-passive {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				cpu_hot: cpu-hot {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <100000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cpu_cooling_maps: cooling-maps {
+				map0 {
+					trip = <&cpu_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&efuse {
+	sn: sn@32 {
+		reg = <0x32 0x20>;
+	};
+
+	eth_mac: eth-mac@0 {
+		reg = <0x0 0x6>;
+	};
+
+	bt_mac: bt-mac@6 {
+		reg = <0x6 0x6>;
+	};
+
+	wifi_mac: wifi-mac@c {
+		reg = <0xc 0x6>;
+	};
+
+	bid: bid@12 {
+		reg = <0x12 0x20>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rmii_x_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */
+		eth_phy0: ethernet-phy@0 {
+			/* compatible = "ethernet-phy-id0243.0c54";*/
+			max-speed = <100>;
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* Internal I2C bus (on CPU module) */
+&i2c1 {
+	status = "okay";
+	pinctrl-0 = <&i2c1_z_pins>;
+	pinctrl-names = "default";
+
+	/* RTC */
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		status = "okay";
+	};
+};
+
+/* Peripheral I2C bus (on motherboard) */
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_a_x20_pins>;
+	pinctrl-names = "default";
+};
+
+/* wifi module */
+&sd_emmc_b {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* emmc storage */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccq_1v8>;
+};
+
+/* UART Bluetooth */
+&uart_B {
+	status = "okay";
+	pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+/* UART Console */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/* UART Wireless module */
+&uart_AO_B {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_b_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	vbus-supply = <&usb_pwr>;
+};
+
+&spicc1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>;
+	pinctrl-names = "default";
+};
+
+&gpio {
+	gpio-line-names =
+		"", "", "", "", "", // 0 - 4
+		"", "", "", "", "", // 5 - 9
+		"UserButton", "", "", "", "", // 10 - 14
+		"", "", "", "", "", // 15 - 19
+		"", "", "", "", "", // 20 - 24
+		"", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29
+		"Output1", "", "", "", "", // 30 - 34
+		"", "ZigBeeBOOT", "", "", "", // 35 - 39
+		"1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44
+		"Input2", "Input1", "", "", "", // 45 - 49
+		"", "", "", "", "", // 50 - 54
+		"", "", "", "", "", // 55 - 59
+		"", "", "", "", "", // 60 - 64
+		"", "", "", "", "", // 65 - 69
+		"", "", "", "", "", // 70 - 74
+		"", "", "", "", "", // 75 - 79
+		"", "", "", "", "", // 80 - 84
+		"", ""; // 85-86
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 359589d1dfa9..9611775b81ee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -12,7 +12,7 @@
 	compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg";
 	model = "Amlogic Meson AXG S400 Development Board";
 
-	adc_keys {
+	keys {
 		compatible = "adc-keys";
 		io-channels = <&saradc 0>;
 		io-channel-names = "buttons";
@@ -66,7 +66,6 @@
 		VDDA-supply = <&vcc_3v3>;
 		VDDP-supply = <&vcc_3v3>;
 		VDDD-supply = <&vcc_3v3>;
-		status = "okay";
 		sound-name-prefix = "Linein";
 	};
 
@@ -75,14 +74,12 @@
 		compatible = "everest,es7154";
 		VDD-supply = <&vcc_3v3>;
 		PVDD-supply = <&vcc_5v>;
-		status = "okay";
 		sound-name-prefix = "Lineout";
 	};
 
 	spdif_dit: audio-codec-2 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -91,14 +88,12 @@
 		compatible = "dmic-codec";
 		num-channels = <7>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
 	spdif_dir: audio-codec-4 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dir";
-		status = "okay";
 		sound-name-prefix = "DIR";
 	};
 
@@ -116,7 +111,7 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	main_12v: regulator-main_12v {
+	main_12v: regulator-main-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "12V";
 		regulator-min-microvolt = <12000000>;
@@ -124,7 +119,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -133,7 +128,7 @@
 		regulator-always-on;
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC5V";
 		regulator-min-microvolt = <5000000>;
@@ -144,7 +139,7 @@
 		enable-active-high;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -153,7 +148,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -162,7 +157,7 @@
 		regulator-always-on;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
@@ -171,7 +166,7 @@
 		regulator-always-on;
 	};
 
-	usb_pwr: regulator-usb_pwr {
+	usb_pwr: regulator-usb-pwr {
 		compatible = "regulator-fixed";
 		regulator-name = "USB_PWR";
 		regulator-min-microvolt = <5000000>;
@@ -273,6 +268,10 @@
 				"Speaker1 Right", "SPK1 OUT_D",
 				"Linein AINL", "Linein",
 				"Linein AINR", "Linein";
+		clocks = <&clkc CLKID_HIFI_PLL>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_HIFI_PLL>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -280,7 +279,6 @@
 		assigned-clock-rates = <589824000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 04f797b5a012..04fb130ac7c6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -25,10 +25,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_A";
-		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -36,10 +36,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_B";
-		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -47,10 +47,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_C";
-		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -74,6 +74,8 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			dynamic-power-coefficient = <140>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -81,8 +83,16 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			dynamic-power-coefficient = <140>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -90,8 +100,16 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			dynamic-power-coefficient = <140>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -99,12 +117,25 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			dynamic-power-coefficient = <140>;
+			#cooling-cells = <2>;
 		};
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -152,7 +183,7 @@
 		scpi_clocks: clocks {
 			compatible = "arm,scpi-clocks";
 
-			scpi_dvfs: clock-controller {
+			scpi_dvfs: clocks-0 {
 				compatible = "arm,scpi-dvfs-clocks";
 				#clock-cells = <1>;
 				clock-indices = <0>;
@@ -161,7 +192,7 @@
 		};
 
 		scpi_sensors: sensors {
-			compatible = "amlogic,meson-gxbb-scpi-sensors";
+			compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
 			#thermal-sensor-cells = <1>;
 		};
 	};
@@ -430,6 +461,27 @@
 					};
 				};
 
+				nand_all_pins: nand-all-pins {
+					mux {
+						groups = "emmc_nand_d0",
+							 "emmc_nand_d1",
+							 "emmc_nand_d2",
+							 "emmc_nand_d3",
+							 "emmc_nand_d4",
+							 "emmc_nand_d5",
+							 "emmc_nand_d6",
+							 "emmc_nand_d7",
+							 "nand_ce0",
+							 "nand_ale",
+							 "nand_cle",
+							 "nand_wen_clk",
+							 "nand_ren_wr";
+						function = "nand";
+						input-enable;
+						bias-pull-up;
+					};
+				};
+
 				emmc_ds_pins: emmc_ds {
 					mux {
 						groups = "emmc_ds";
@@ -1133,7 +1185,7 @@
 						groups = "uart_tx_a",
 							 "uart_rx_a";
 						function = "uart_a";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1151,7 +1203,7 @@
 						groups = "uart_tx_b_x",
 							 "uart_rx_b_x";
 						function = "uart_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1169,7 +1221,7 @@
 						groups = "uart_tx_b_z",
 							 "uart_rx_b_z";
 						function = "uart_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1187,7 +1239,7 @@
 						groups = "uart_ao_tx_b_z",
 							 "uart_ao_rx_b_z";
 						function = "uart_ao_b_z";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1623,7 +1675,7 @@
 						groups = "uart_ao_tx_a",
 							 "uart_ao_rx_a";
 						function = "uart_ao_a";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1641,7 +1693,7 @@
 						groups = "uart_ao_tx_b",
 							 "uart_ao_rx_b";
 						function = "uart_ao_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1662,8 +1714,12 @@
 			};
 
 			pwm_AO_cd: pwm@2000 {
-				compatible = "amlogic,meson-axg-ao-pwm";
+				compatible = "amlogic,meson-axg-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x02000  0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_CLK81>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV5>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -1697,8 +1753,12 @@
 			};
 
 			pwm_AO_ab: pwm@7000 {
-				compatible = "amlogic,meson-axg-ao-pwm";
+				compatible = "amlogic,meson-axg-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x07000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_CLK81>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV5>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -1775,15 +1835,23 @@
 			};
 
 			pwm_ab: pwm@1b000 {
-				compatible = "amlogic,meson-axg-ee-pwm";
+				compatible = "amlogic,meson-axg-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x1b000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc CLKID_FCLK_DIV5>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
 			pwm_cd: pwm@1a000 {
-				compatible = "amlogic,meson-axg-ee-pwm";
+				compatible = "amlogic,meson-axg-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x1a000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc CLKID_FCLK_DIV5>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -1882,10 +1950,10 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
 
-			sd_emmc_b: sd@5000 {
+			sd_emmc_b: mmc@5000 {
 				compatible = "amlogic,meson-axg-mmc";
 				reg = <0x0 0x5000 0x0 0x800>;
-				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 				clocks = <&clkc CLKID_SD_EMMC_B>,
 					<&clkc CLKID_SD_EMMC_B_CLK0>,
@@ -1897,7 +1965,7 @@
 			sd_emmc_c: mmc@7000 {
 				compatible = "amlogic,meson-axg-mmc";
 				reg = <0x0 0x7000 0x0 0x800>;
-				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 				clocks = <&clkc CLKID_SD_EMMC_C>,
 					<&clkc CLKID_SD_EMMC_C_CLK0>,
@@ -1906,6 +1974,21 @@
 				resets = <&reset RESET_SD_EMMC_C>;
 			};
 
+			nfc: nand-controller@7800 {
+				compatible = "amlogic,meson-axg-nfc";
+				reg = <0x0 0x7800 0x0 0x100>,
+				      <0x0 0x7000 0x0 0x800>;
+				reg-names = "nfc", "emmc";
+				pinctrl-0 = <&nand_all_pins>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_SD_EMMC_C>,
+					 <&clkc CLKID_FCLK_DIV2>;
+				clock-names = "core", "device";
+			};
+
 			usb2_phy1: phy@9020 {
 				compatible = "amlogic,meson-gxl-usb2-phy";
 				#phy-cells = <0>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 45947c1031c4..dcc927a9da80 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/clock/g12a-aoclkc.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
 #include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
 #include <dt-bindings/thermal/thermal.h>
 
@@ -214,6 +215,11 @@
 				#sound-dai-cells = <0>;
 				status = "disabled";
 
+				assigned-clocks = <&clkc CLKID_HDMI_SEL>,
+						  <&clkc CLKID_HDMI>;
+				assigned-clock-parents = <&xtal>, <0>;
+				assigned-clock-rates = <0>, <24000000>;
+
 				/* VPU VENC Input */
 				hdmi_tx_venc_port: port@0 {
 					reg = <0>;
@@ -986,7 +992,7 @@
 						mux {
 							groups = "spdif_out_h";
 							function = "spdif_out";
-							drive-strength-microamp = <500>;
+							drive-strength-microamp = <3000>;
 							bias-disable;
 						};
 					};
@@ -995,7 +1001,7 @@
 						mux {
 							groups = "spdif_out_a11";
 							function = "spdif_out";
-							drive-strength-microamp = <500>;
+							drive-strength-microamp = <3000>;
 							bias-disable;
 						};
 					};
@@ -1004,7 +1010,7 @@
 						mux {
 							groups = "spdif_out_a13";
 							function = "spdif_out";
-							drive-strength-microamp = <500>;
+							drive-strength-microamp = <3000>;
 							bias-disable;
 						};
 					};
@@ -1497,7 +1503,7 @@
 							groups = "uart_a_tx",
 								 "uart_a_rx";
 							function = "uart_a";
-							bias-disable;
+							bias-pull-up;
 						};
 					};
 
@@ -1515,7 +1521,7 @@
 							groups = "uart_b_tx",
 								 "uart_b_rx";
 							function = "uart_b";
-							bias-disable;
+							bias-pull-up;
 						};
 					};
 
@@ -1571,15 +1577,20 @@
 
 			dmc: bus@38000 {
 				compatible = "simple-bus";
-				reg = <0x0 0x38000 0x0 0x400>;
 				#address-cells = <2>;
 				#size-cells = <2>;
-				ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>;
+				ranges = <0x0 0x0 0x0 0x38000 0x0 0x2000>;
 
 				canvas: video-lut@48 {
 					compatible = "amlogic,canvas";
 					reg = <0x0 0x48 0x0 0x14>;
 				};
+
+				pmu: pmu@80 {
+					reg = <0x0 0x80 0x0 0x40>,
+					      <0x0 0xc00 0x0 0x40>;
+					interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
+				};
 			};
 
 			usb2_phy1: phy@3a000 {
@@ -1657,9 +1668,28 @@
 								       <250000000>,
 								       <0>; /* Do Nothing */
 					};
+
+					mipi_analog_dphy: phy {
+						compatible = "amlogic,g12a-mipi-dphy-analog";
+						#phy-cells = <0>;
+						status = "disabled";
+					};
 				};
 			};
 
+			mipi_dphy: phy@44000 {
+				compatible = "amlogic,axg-mipi-dphy";
+				reg = <0x0 0x44000 0x0 0x2000>;
+				clocks = <&clkc CLKID_MIPI_DSI_PHY>;
+				clock-names = "pclk";
+				resets = <&reset RESET_MIPI_DSI_PHY>;
+				reset-names = "phy";
+				phys = <&mipi_analog_dphy>;
+				phy-names = "analog";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
 			usb3_pcie_phy: phy@46000 {
 				compatible = "amlogic,g12a-usb3-pcie-phy";
 				reg = <0x0 0x46000 0x0 0x2000>;
@@ -1694,7 +1724,7 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					internal_ephy: ethernet_phy@8 {
+					internal_ephy: ethernet-phy@8 {
 						compatible = "ethernet-phy-id0180.3301",
 							     "ethernet-phy-ieee802.3-c22";
 						interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -1716,9 +1746,6 @@
 				compatible = "amlogic,meson-gx-ao-sysctrl",
 					     "simple-mfd", "syscon";
 				reg = <0x0 0x0 0x0 0x100>;
-				#address-cells = <2>;
-				#size-cells = <2>;
-				ranges = <0x0 0x0 0x0 0x0 0x0 0x100>;
 
 				clkc_AO: clock-controller {
 					compatible = "amlogic,meson-g12a-aoclkc";
@@ -1727,278 +1754,278 @@
 					clocks = <&xtal>, <&clkc CLKID_CLK81>;
 					clock-names = "xtal", "mpeg-clk";
 				};
+			};
 
-				ao_pinctrl: pinctrl@14 {
-					compatible = "amlogic,meson-g12a-aobus-pinctrl";
-					#address-cells = <2>;
-					#size-cells = <2>;
-					ranges;
-
-					gpio_ao: bank@14 {
-						reg = <0x0 0x14 0x0 0x8>,
-						      <0x0 0x1c 0x0 0x8>,
-						      <0x0 0x24 0x0 0x14>;
-						reg-names = "mux",
-							    "ds",
-							    "gpio";
-						gpio-controller;
-						#gpio-cells = <2>;
-						gpio-ranges = <&ao_pinctrl 0 0 15>;
-					};
+			ao_pinctrl: pinctrl@14 {
+				compatible = "amlogic,meson-g12a-aobus-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio_ao: bank@14 {
+					reg = <0x0 0x14 0x0 0x8>,
+					      <0x0 0x1c 0x0 0x8>,
+					      <0x0 0x24 0x0 0x14>;
+					reg-names = "mux",
+						    "ds",
+						    "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&ao_pinctrl 0 0 15>;
+				};
 
-					i2c_ao_sck_pins: i2c_ao_sck_pins {
-						mux {
-							groups = "i2c_ao_sck";
-							function = "i2c_ao";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				i2c_ao_sck_pins: i2c_ao_sck_pins {
+					mux {
+						groups = "i2c_ao_sck";
+						function = "i2c_ao";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					i2c_ao_sda_pins: i2c_ao_sda {
-						mux {
-							groups = "i2c_ao_sda";
-							function = "i2c_ao";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				i2c_ao_sda_pins: i2c_ao_sda {
+					mux {
+						groups = "i2c_ao_sda";
+						function = "i2c_ao";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					i2c_ao_sck_e_pins: i2c_ao_sck_e {
-						mux {
-							groups = "i2c_ao_sck_e";
-							function = "i2c_ao";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				i2c_ao_sck_e_pins: i2c_ao_sck_e {
+					mux {
+						groups = "i2c_ao_sck_e";
+						function = "i2c_ao";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					i2c_ao_sda_e_pins: i2c_ao_sda_e {
-						mux {
-							groups = "i2c_ao_sda_e";
-							function = "i2c_ao";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				i2c_ao_sda_e_pins: i2c_ao_sda_e {
+					mux {
+						groups = "i2c_ao_sda_e";
+						function = "i2c_ao";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					mclk0_ao_pins: mclk0-ao {
-						mux {
-							groups = "mclk0_ao";
-							function = "mclk0_ao";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				mclk0_ao_pins: mclk0-ao {
+					mux {
+						groups = "mclk0_ao";
+						function = "mclk0_ao";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					tdm_ao_b_din0_pins: tdm-ao-b-din0 {
-						mux {
-							groups = "tdm_ao_b_din0";
-							function = "tdm_ao_b";
-							bias-disable;
-						};
+				tdm_ao_b_din0_pins: tdm-ao-b-din0 {
+					mux {
+						groups = "tdm_ao_b_din0";
+						function = "tdm_ao_b";
+						bias-disable;
 					};
+				};
 
-					spdif_ao_out_pins: spdif-ao-out {
-						mux {
-							groups = "spdif_ao_out";
-							function = "spdif_ao_out";
-							drive-strength-microamp = <500>;
-							bias-disable;
-						};
+				spdif_ao_out_pins: spdif-ao-out {
+					mux {
+						groups = "spdif_ao_out";
+						function = "spdif_ao_out";
+						drive-strength-microamp = <3000>;
+						bias-disable;
 					};
+				};
 
-					tdm_ao_b_din1_pins: tdm-ao-b-din1 {
-						mux {
-							groups = "tdm_ao_b_din1";
-							function = "tdm_ao_b";
-							bias-disable;
-						};
+				tdm_ao_b_din1_pins: tdm-ao-b-din1 {
+					mux {
+						groups = "tdm_ao_b_din1";
+						function = "tdm_ao_b";
+						bias-disable;
 					};
+				};
 
-					tdm_ao_b_din2_pins: tdm-ao-b-din2 {
-						mux {
-							groups = "tdm_ao_b_din2";
-							function = "tdm_ao_b";
-							bias-disable;
-						};
+				tdm_ao_b_din2_pins: tdm-ao-b-din2 {
+					mux {
+						groups = "tdm_ao_b_din2";
+						function = "tdm_ao_b";
+						bias-disable;
 					};
+				};
 
-					tdm_ao_b_dout0_pins: tdm-ao-b-dout0 {
-						mux {
-							groups = "tdm_ao_b_dout0";
-							function = "tdm_ao_b";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				tdm_ao_b_dout0_pins: tdm-ao-b-dout0 {
+					mux {
+						groups = "tdm_ao_b_dout0";
+						function = "tdm_ao_b";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					tdm_ao_b_dout1_pins: tdm-ao-b-dout1 {
-						mux {
-							groups = "tdm_ao_b_dout1";
-							function = "tdm_ao_b";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				tdm_ao_b_dout1_pins: tdm-ao-b-dout1 {
+					mux {
+						groups = "tdm_ao_b_dout1";
+						function = "tdm_ao_b";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					tdm_ao_b_dout2_pins: tdm-ao-b-dout2 {
-						mux {
-							groups = "tdm_ao_b_dout2";
-							function = "tdm_ao_b";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				tdm_ao_b_dout2_pins: tdm-ao-b-dout2 {
+					mux {
+						groups = "tdm_ao_b_dout2";
+						function = "tdm_ao_b";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					tdm_ao_b_fs_pins: tdm-ao-b-fs {
-						mux {
-							groups = "tdm_ao_b_fs";
-							function = "tdm_ao_b";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				tdm_ao_b_fs_pins: tdm-ao-b-fs {
+					mux {
+						groups = "tdm_ao_b_fs";
+						function = "tdm_ao_b";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					tdm_ao_b_sclk_pins: tdm-ao-b-sclk {
-						mux {
-							groups = "tdm_ao_b_sclk";
-							function = "tdm_ao_b";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				tdm_ao_b_sclk_pins: tdm-ao-b-sclk {
+					mux {
+						groups = "tdm_ao_b_sclk";
+						function = "tdm_ao_b";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs {
-						mux {
-							groups = "tdm_ao_b_slv_fs";
-							function = "tdm_ao_b";
-							bias-disable;
-						};
+				tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs {
+					mux {
+						groups = "tdm_ao_b_slv_fs";
+						function = "tdm_ao_b";
+						bias-disable;
 					};
+				};
 
-					tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk {
-						mux {
-							groups = "tdm_ao_b_slv_sclk";
-							function = "tdm_ao_b";
-							bias-disable;
-						};
+				tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk {
+					mux {
+						groups = "tdm_ao_b_slv_sclk";
+						function = "tdm_ao_b";
+						bias-disable;
 					};
+				};
 
-					uart_ao_a_pins: uart-a-ao {
-						mux {
-							groups = "uart_ao_a_tx",
-								 "uart_ao_a_rx";
-							function = "uart_ao_a";
-							bias-disable;
-						};
+				uart_ao_a_pins: uart-ao-a {
+					mux {
+						groups = "uart_ao_a_tx",
+							 "uart_ao_a_rx";
+						function = "uart_ao_a";
+						bias-pull-up;
 					};
+				};
 
-					uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts {
-						mux {
-							groups = "uart_ao_a_cts",
-								 "uart_ao_a_rts";
-							function = "uart_ao_a";
-							bias-disable;
-						};
+				uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts {
+					mux {
+						groups = "uart_ao_a_cts",
+							 "uart_ao_a_rts";
+						function = "uart_ao_a";
+						bias-disable;
 					};
+				};
 
-					uart_ao_b_2_3_pins: uart-ao-b-2-3 {
-						mux {
-							groups = "uart_ao_b_tx_2",
-								 "uart_ao_b_rx_3";
-							function = "uart_ao_b";
-							bias-disable;
-						};
+				uart_ao_b_2_3_pins: uart-ao-b-2-3 {
+					mux {
+						groups = "uart_ao_b_tx_2",
+							 "uart_ao_b_rx_3";
+						function = "uart_ao_b";
+						bias-pull-up;
 					};
+				};
 
-					uart_ao_b_8_9_pins: uart-ao-b-8-9 {
-						mux {
-							groups = "uart_ao_b_tx_8",
-								 "uart_ao_b_rx_9";
-							function = "uart_ao_b";
-							bias-disable;
-						};
+				uart_ao_b_8_9_pins: uart-ao-b-8-9 {
+					mux {
+						groups = "uart_ao_b_tx_8",
+							 "uart_ao_b_rx_9";
+						function = "uart_ao_b";
+						bias-pull-up;
 					};
+				};
 
-					uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts {
-						mux {
-							groups = "uart_ao_b_cts",
-								 "uart_ao_b_rts";
-							function = "uart_ao_b";
-							bias-disable;
-						};
+				uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts {
+					mux {
+						groups = "uart_ao_b_cts",
+							 "uart_ao_b_rts";
+						function = "uart_ao_b";
+						bias-disable;
 					};
+				};
 
-					pwm_a_e_pins: pwm-a-e {
-						mux {
-							groups = "pwm_a_e";
-							function = "pwm_a_e";
-							bias-disable;
-						};
+				pwm_a_e_pins: pwm-a-e {
+					mux {
+						groups = "pwm_a_e";
+						function = "pwm_a_e";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_a_pins: pwm-ao-a {
-						mux {
-							groups = "pwm_ao_a";
-							function = "pwm_ao_a";
-							bias-disable;
-						};
+				pwm_ao_a_pins: pwm-ao-a {
+					mux {
+						groups = "pwm_ao_a";
+						function = "pwm_ao_a";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_b_pins: pwm-ao-b {
-						mux {
-							groups = "pwm_ao_b";
-							function = "pwm_ao_b";
-							bias-disable;
-						};
+				pwm_ao_b_pins: pwm-ao-b {
+					mux {
+						groups = "pwm_ao_b";
+						function = "pwm_ao_b";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_c_4_pins: pwm-ao-c-4 {
-						mux {
-							groups = "pwm_ao_c_4";
-							function = "pwm_ao_c";
-							bias-disable;
-						};
+				pwm_ao_c_4_pins: pwm-ao-c-4 {
+					mux {
+						groups = "pwm_ao_c_4";
+						function = "pwm_ao_c";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_c_6_pins: pwm-ao-c-6 {
-						mux {
-							groups = "pwm_ao_c_6";
-							function = "pwm_ao_c";
-							bias-disable;
-						};
+				pwm_ao_c_6_pins: pwm-ao-c-6 {
+					mux {
+						groups = "pwm_ao_c_6";
+						function = "pwm_ao_c";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_d_5_pins: pwm-ao-d-5 {
-						mux {
-							groups = "pwm_ao_d_5";
-							function = "pwm_ao_d";
-							bias-disable;
-						};
+				pwm_ao_d_5_pins: pwm-ao-d-5 {
+					mux {
+						groups = "pwm_ao_d_5";
+						function = "pwm_ao_d";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_d_10_pins: pwm-ao-d-10 {
-						mux {
-							groups = "pwm_ao_d_10";
-							function = "pwm_ao_d";
-							bias-disable;
-						};
+				pwm_ao_d_10_pins: pwm-ao-d-10 {
+					mux {
+						groups = "pwm_ao_d_10";
+						function = "pwm_ao_d";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_d_e_pins: pwm-ao-d-e {
-						mux {
-							groups = "pwm_ao_d_e";
-							function = "pwm_ao_d";
-						};
+				pwm_ao_d_e_pins: pwm-ao-d-e {
+					mux {
+						groups = "pwm_ao_d_e";
+						function = "pwm_ao_d";
 					};
+				};
 
-					remote_input_ao_pins: remote-input-ao {
-						mux {
-							groups = "remote_ao_input";
-							function = "remote_ao_input";
-							bias-disable;
-						};
+				remote_input_ao_pins: remote-input-ao {
+					mux {
+						groups = "remote_ao_input";
+						function = "remote_ao_input";
+						bias-disable;
 					};
 				};
 			};
@@ -2033,14 +2060,18 @@
 			};
 
 			pwm_AO_cd: pwm@2000 {
-				compatible = "amlogic,meson-g12a-ao-pwm-cd";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x2000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_CLK81>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
 			uart_AO: serial@3000 {
-				compatible = "amlogic,meson-gx-uart",
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart",
 					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x3000 0x0 0x18>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
@@ -2050,7 +2081,8 @@
 			};
 
 			uart_AO_B: serial@4000 {
-				compatible = "amlogic,meson-gx-uart",
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart",
 					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x4000 0x0 0x18>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
@@ -2070,8 +2102,13 @@
 			};
 
 			pwm_AO_ab: pwm@7000 {
-				compatible = "amlogic,meson-g12a-ao-pwm-ab";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x7000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_CLK81>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV5>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -2144,6 +2181,15 @@
 					remote-endpoint = <&hdmi_tx_in>;
 				};
 			};
+
+			/* DPI output port */
+			dpi_port: port@2 {
+				reg = <2>;
+
+				dpi_out: endpoint {
+					remote-endpoint = <&mipi_dsi_in>;
+				};
+			};
 		};
 
 		gic: interrupt-controller@ffc01000 {
@@ -2181,6 +2227,48 @@
 				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
 			};
 
+			mipi_dsi: dsi@7000 {
+				compatible = "amlogic,meson-g12a-dw-mipi-dsi";
+				reg = <0x0 0x7000 0x0 0x1000>;
+				resets = <&reset RESET_MIPI_DSI_HOST>;
+				reset-names = "top";
+				clocks = <&clkc CLKID_MIPI_DSI_HOST>,
+					 <&clkc CLKID_MIPI_DSI_PXCLK>,
+					 <&clkc CLKID_CTS_ENCL>;
+				clock-names = "pclk", "bit", "px";
+				phys = <&mipi_dphy>;
+				phy-names = "dphy";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+
+				assigned-clocks = <&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
+					 <&clkc CLKID_CTS_ENCL_SEL>,
+					 <&clkc CLKID_VCLK2_SEL>;
+				assigned-clock-parents = <&clkc CLKID_GP0_PLL>,
+					 <&clkc CLKID_VCLK2_DIV1>,
+					 <&clkc CLKID_GP0_PLL>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					/* VPU VENC Input */
+					mipi_dsi_venc_port: port@0 {
+						reg = <0>;
+
+						mipi_dsi_in: endpoint {
+							remote-endpoint = <&dpi_out>;
+						};
+					};
+
+					/* DSI Output */
+					mipi_dsi_panel_port: port@1 {
+						reg = <1>;
+					};
+				};
+			};
+
 			watchdog: watchdog@f0d0 {
 				compatible = "amlogic,meson-gxbb-wdt";
 				reg = <0x0 0xf0d0 0x0 0x10>;
@@ -2221,22 +2309,37 @@
 			};
 
 			pwm_ef: pwm@19000 {
-				compatible = "amlogic,meson-g12a-ee-pwm";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x19000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
 			pwm_cd: pwm@1a000 {
-				compatible = "amlogic,meson-g12a-ee-pwm";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x1a000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
 			pwm_ab: pwm@1b000 {
-				compatible = "amlogic,meson-g12a-ee-pwm";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x1b000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -2287,7 +2390,8 @@
 			};
 
 			uart_C: serial@22000 {
-				compatible = "amlogic,meson-gx-uart";
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart";
 				reg = <0x0 0x22000 0x0 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
@@ -2296,7 +2400,8 @@
 			};
 
 			uart_B: serial@23000 {
-				compatible = "amlogic,meson-gx-uart";
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart";
 				reg = <0x0 0x23000 0x0 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
@@ -2305,7 +2410,8 @@
 			};
 
 			uart_A: serial@24000 {
-				compatible = "amlogic,meson-gx-uart";
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart";
 				reg = <0x0 0x24000 0x0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
@@ -2315,10 +2421,10 @@
 			};
 		};
 
-		sd_emmc_a: sd@ffe03000 {
+		sd_emmc_a: mmc@ffe03000 {
 			compatible = "amlogic,meson-axg-mmc";
 			reg = <0x0 0xffe03000 0x0 0x800>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			clocks = <&clkc CLKID_SD_EMMC_A>,
 				 <&clkc CLKID_SD_EMMC_A_CLK0>,
@@ -2327,10 +2433,10 @@
 			resets = <&reset RESET_SD_EMMC_A>;
 		};
 
-		sd_emmc_b: sd@ffe05000 {
+		sd_emmc_b: mmc@ffe05000 {
 			compatible = "amlogic,meson-axg-mmc";
 			reg = <0x0 0xffe05000 0x0 0x800>;
-			interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			clocks = <&clkc CLKID_SD_EMMC_B>,
 				 <&clkc CLKID_SD_EMMC_B_CLK0>,
@@ -2342,7 +2448,7 @@
 		sd_emmc_c: mmc@ffe07000 {
 			compatible = "amlogic,meson-axg-mmc";
 			reg = <0x0 0xffe07000 0x0 0x800>;
-			interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			clocks = <&clkc CLKID_SD_EMMC_C>,
 				 <&clkc CLKID_SD_EMMC_C_CLK0>,
@@ -2484,4 +2590,17 @@
 		#clock-cells = <0>;
 	};
 
+	npu: npu@ff100000 {
+		compatible = "vivante,gc";
+		reg = <0x0 0xff100000 0x0 0x20000>;
+		interrupts = <0 147 4>;
+		clocks = <&clkc CLKID_NNA_CORE_CLK>,
+			 <&clkc CLKID_NNA_AXI_CLK>;
+		clock-names = "core", "bus";
+		assigned-clocks = <&clkc CLKID_NNA_CORE_CLK>,
+				  <&clkc CLKID_NNA_AXI_CLK>;
+		assigned-clock-rates = <800000000>, <800000000>;
+		resets = <&reset RESET_NNA>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
index 6a1f4dcf6488..664912d1beaa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
@@ -15,10 +15,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_A";
-		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -26,10 +26,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_B";
-		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -37,10 +37,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_C";
-		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 };
@@ -195,8 +195,7 @@
 		};
 
 		tdmin_a: audio-controller@300 {
-			compatible = "amlogic,g12a-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,g12a-tdmin";
 			reg = <0x0 0x300 0x0 0x40>;
 			sound-name-prefix = "TDMIN_A";
 			resets = <&clkc_audio AUD_RESET_TDMIN_A>;
@@ -211,8 +210,7 @@
 		};
 
 		tdmin_b: audio-controller@340 {
-			compatible = "amlogic,g12a-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,g12a-tdmin";
 			reg = <0x0 0x340 0x0 0x40>;
 			sound-name-prefix = "TDMIN_B";
 			resets = <&clkc_audio AUD_RESET_TDMIN_B>;
@@ -227,8 +225,7 @@
 		};
 
 		tdmin_c: audio-controller@380 {
-			compatible = "amlogic,g12a-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,g12a-tdmin";
 			reg = <0x0 0x380 0x0 0x40>;
 			sound-name-prefix = "TDMIN_C";
 			resets = <&clkc_audio AUD_RESET_TDMIN_C>;
@@ -243,8 +240,7 @@
 		};
 
 		tdmin_lb: audio-controller@3c0 {
-			compatible = "amlogic,g12a-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,g12a-tdmin";
 			reg = <0x0 0x3c0 0x0 0x40>;
 			sound-name-prefix = "TDMIN_LB";
 			resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
@@ -272,12 +268,12 @@
 			status = "disabled";
 		};
 
-		spdifout: audio-controller@480 {
+		spdifout_a: audio-controller@480 {
 			compatible = "amlogic,g12a-spdifout",
 				     "amlogic,axg-spdifout";
 			reg = <0x0 0x480 0x0 0x50>;
 			#sound-dai-cells = <0>;
-			sound-name-prefix = "SPDIFOUT";
+			sound-name-prefix = "SPDIFOUT_A";
 			clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
 				 <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
 			clock-names = "pclk", "mclk";
@@ -367,6 +363,10 @@
 	power-domains = <&pwrc PWRC_G12A_ETH_ID>;
 };
 
+&hdmi_tx {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
 &vpu {
 	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
new file mode 100644
index 000000000000..9591fdc31ee0
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2024 Freebox SAS
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+&uart_A {
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+		vbat-supply = <&vddao_3v3>;
+		vddio-supply = <&vddio_ao1v8>;
+	};
+};
+
+&sd_emmc_a {
+	/* Per mmc-controller.yaml */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	/* NB: may be either AP6398S or AP6398SR3 wifi module */
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
new file mode 100644
index 000000000000..55fff35b09ae
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2024 Freebox SAS
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+&uart_A {
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&sd_emmc_a {
+	/* No explicit compatible for rtl8822cs sdio */
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
new file mode 100644
index 000000000000..d0a3b4b9229c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
@@ -0,0 +1,458 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2024 Freebox SAS
+
+/*
+ * SEI codename: SEI530FB (based on SEI510)
+ * Freebox codename: fbx8am
+ * Commercial names: Freebox Pop, Player TV Free 4K
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "freebox,fbx8am", "amlogic,g12a";
+	model = "Freebox Player Pop";
+	chassis-type = "embedded";
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		/* Physical user-accessible reset button near USB port */
+		power-button {
+			label = "Reset";
+			linux,code = <BTN_MISC>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	spdif_dit: audio-codec-2 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ao_5v: regulator-ao-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddao_3v3_t: regulator-vddao-3v3-t {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3_T";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&ao_5v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio-ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <10>; /* required for 43752 */
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "fbx8am";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* spdif hdmi or toslink interface */
+		dai-link-4 {
+			sound-dai = <&spdifout_a>;
+
+			codec-0 {
+			sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-5 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-6 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&spdifout_a {
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+};
+
+&pdm {
+	pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
+		    <&pdm_din2_z_pins>, <&pdm_din3_z_pins>,
+		    <&pdm_dclk_z_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
index e3bb6df42ff3..4353485c6f26 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
@@ -60,7 +60,7 @@
 		clock-names = "ext_clock";
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -68,7 +68,7 @@
 		regulator-always-on;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -77,7 +77,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -86,7 +86,7 @@
 		regulator-always-on;
 	};
 
-	hdmi_pw: regulator-hdmi_pw {
+	hdmi_pw: regulator-hdmi-pw {
 		compatible = "regulator-fixed";
 		regulator-name = "HDMI_PW";
 		regulator-min-microvolt = <5000000>;
@@ -95,7 +95,7 @@
 		regulator-always-on;
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -104,7 +104,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -138,6 +138,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -145,7 +149,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
@@ -217,28 +220,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -281,8 +280,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -290,8 +287,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &saradc {
@@ -401,5 +396,4 @@
 
 &usb {
 	status = "okay";
-	dr_mode = "host";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 4fb31c2ba31c..f39fcabc763f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -15,7 +15,7 @@
 	compatible = "seirobotics,sei510", "amlogic,g12a";
 	model = "SEI Robotics SEI510";
 
-	adc_keys {
+	keys {
 		compatible = "adc-keys";
 		io-channels = <&saradc 0>;
 		io-channel-names = "buttons";
@@ -45,7 +45,6 @@
 		compatible = "dmic-codec";
 		num-channels = <2>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
@@ -84,7 +83,7 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -93,7 +92,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -101,7 +100,7 @@
 		regulator-always-on;
 	};
 
-	emmc_1v8: regulator-emmc_1v8 {
+	emmc_1v8: regulator-emmc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "EMMC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -110,7 +109,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -119,7 +118,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3_t: regultor-vddao_3v3_t {
+	vddao_3v3_t: regulator-vddao-3v3-t {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3_T";
 		regulator-min-microvolt = <3300000>;
@@ -148,7 +147,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao1v8: regulator-vddio_ao1v8 {
+	vddio_ao1v8: regulator-vddio-ao1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO1V8";
 		regulator-min-microvolt = <1800000>;
@@ -202,6 +201,10 @@
 				"TODDR_B IN 1", "TDMIN_B OUT",
 				"TODDR_C IN 1", "TDMIN_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -209,7 +212,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
@@ -312,28 +314,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -387,8 +385,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -396,8 +392,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &pdm {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index 4b5d11e56364..b5bf8ecc91e6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -8,6 +8,8 @@
 #include "meson-g12a.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
 
 / {
 	compatible = "amlogic,u200", "amlogic,g12a";
@@ -18,6 +20,25 @@
 		ethernet0 = &ethmac;
 	};
 
+	dioo2133: audio-amplifier-0 {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		VCC-supply = <&vcc_5v>;
+		sound-name-prefix = "10U2";
+	};
+
+	spdif_dir: audio-codec-0 {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "DIR";
+	};
+
+	spdif_dit: audio-codec-1 {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "DIT";
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -53,7 +74,7 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	flash_1v8: regulator-flash_1v8 {
+	flash_1v8: regulator-flash-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "FLASH_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -62,7 +83,7 @@
 		regulator-always-on;
 	};
 
-	main_12v: regulator-main_12v {
+	main_12v: regulator-main-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "12V";
 		regulator-min-microvolt = <12000000>;
@@ -70,7 +91,7 @@
 		regulator-always-on;
 	};
 
-	usb_pwr_en: regulator-usb_pwr_en {
+	usb_pwr_en: regulator-usb-pwr-en {
 		compatible = "regulator-fixed";
 		regulator-name = "USB_PWR_EN";
 		regulator-min-microvolt = <5000000>;
@@ -81,7 +102,7 @@
 		enable-active-high;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -90,7 +111,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -100,7 +121,7 @@
 		/* FIXME: actually controlled by VDDCPU_B_EN */
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_5V";
 		regulator-min-microvolt = <5000000>;
@@ -111,7 +132,7 @@
 		enable-active-high;
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -120,7 +141,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -147,6 +168,221 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "U200";
+		audio-widgets = "Line", "Lineout";
+		audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>,
+				 <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
+				 <&tdmin_lb>, <&dioo2133>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
+				"TDM_C Playback", "TDMOUT_C OUT",
+				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3",
+				"SPDIFOUT_B IN 0", "FRDDR_A OUT 4",
+				"SPDIFOUT_B IN 1", "FRDDR_B OUT 4",
+				"SPDIFOUT_B IN 2", "FRDDR_C OUT 4",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_A IN 1", "TDM_B Capture",
+				"TDMIN_A IN 2", "TDM_C Capture",
+				"TDMIN_A IN 3", "TDM_A Loopback",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_A IN 5", "TDM_C Loopback",
+				"TDMIN_B IN 0", "TDM_A Capture",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 2", "TDM_C Capture",
+				"TDMIN_B IN 3", "TDM_A Loopback",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 5", "TDM_C Loopback",
+				"TDMIN_C IN 0", "TDM_A Capture",
+				"TDMIN_C IN 1", "TDM_B Capture",
+				"TDMIN_C IN 2", "TDM_C Capture",
+				"TDMIN_C IN 3", "TDM_A Loopback",
+				"TDMIN_C IN 4", "TDM_B Loopback",
+				"TDMIN_C IN 5", "TDM_C Loopback",
+				"TDMIN_LB IN 3", "TDM_A Capture",
+				"TDMIN_LB IN 4", "TDM_B Capture",
+				"TDMIN_LB IN 5", "TDM_C Capture",
+				"TDMIN_LB IN 0", "TDM_A Loopback",
+				"TDMIN_LB IN 1", "TDM_B Loopback",
+				"TDMIN_LB IN 2", "TDM_C Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"TODDR_A IN 3", "SPDIFIN Capture",
+				"TODDR_B IN 3", "SPDIFIN Capture",
+				"TODDR_C IN 3", "SPDIFIN Capture",
+				"TODDR_A IN 6", "TDMIN_LB OUT",
+				"TODDR_B IN 6", "TDMIN_LB OUT",
+				"TODDR_C IN 6", "TDMIN_LB OUT",
+				"10U2 INL", "ACODEC LOLP",
+				"10U2 INR", "ACODEC LORP",
+				"Lineout", "10U2 OUTL",
+				"Lineout", "10U2 OUTR";
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* Connected to the WIFI/BT chip */
+		dai-link-6 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "dsp_a";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&toacodec TOACODEC_IN_A>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* Connected to the onboard AD82584F DAC */
+		dai-link-7 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&toacodec TOACODEC_IN_B>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* 8ch HDMI interface */
+		dai-link-8 {
+			sound-dai = <&tdmif_c>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&toacodec TOACODEC_IN_C>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+			};
+		};
+
+		/* spdif hdmi and coax output */
+		dai-link-9 {
+			sound-dai = <&spdifout_a>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-10 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-11 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		/* internal codec glue */
+		dai-link-12 {
+			sound-dai = <&toacodec TOACODEC_OUT>;
+
+			codec {
+				sound-dai = <&acodec>;
+			};
+		};
+
+		/* spdif coax input */
+		dai-link-13 {
+			sound-dai = <&spdifin>;
+
+			codec {
+				sound-dai = <&spdif_dir>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddao_1v8>;
+	status = "okay";
+};
+
+&arb {
+	status = "okay";
 };
 
 &cec_AO {
@@ -163,32 +399,36 @@
 	hdmi-phandle = <&hdmi_tx>;
 };
 
+&clkc_audio {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
+};
+
+&clkc_audio {
+	status = "okay";
 };
 
 &cvbs_vdac_port {
@@ -203,6 +443,18 @@
 	phy-mode = "rmii";
 };
 
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
 &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
@@ -246,8 +498,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -288,6 +538,95 @@
 	vqmmc-supply = <&flash_1v8>;
 };
 
+&spdifin {
+	pinctrl-0 = <&spdif_in_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_a {
+	pinctrl-0 = <&spdif_ao_out_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&tdmif_a {
+	pinctrl-0 = <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>, <&tdm_a_dout0_pins> ;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tdmif_b {
+	pinctrl-0 = <&mclk0_a_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>,
+		    <&tdm_b_dout0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_MCLK_PAD0>,
+			  <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
+			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
+	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+				 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+	assigned-clock-rates = <0>, <0>, <0>;
+};
+
+&tdmif_c {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmin_c {
+	status = "okay";
+};
+
+&tdmin_lb {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tdmout_c {
+	status = "okay";
+};
+
+&toacodec {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
 &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index b4e86196e346..5ab460a3e637 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -22,7 +22,6 @@
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -67,7 +66,7 @@
 		clock-names = "ext_clock";
 	};
 
-	flash_1v8: regulator-flash_1v8 {
+	flash_1v8: regulator-flash-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "FLASH_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -76,7 +75,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -84,7 +83,7 @@
 		regulator-always-on;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -93,7 +92,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -103,7 +102,7 @@
 		/* FIXME: actually controlled by VDDCPU_B_EN */
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_5V";
 		regulator-min-microvolt = <5000000>;
@@ -111,10 +110,9 @@
 		vin-supply = <&dc_in>;
 
 		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
-		enable-active-low;
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -123,7 +121,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -156,9 +154,13 @@
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT",
-				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
-				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
-				"SPDIFOUT IN 2", "FRDDR_C OUT 3";
+				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
 
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
@@ -167,7 +169,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
@@ -198,7 +199,7 @@
 
 		/* spdif hdmi or toslink interface */
 		dai-link-4 {
-			sound-dai = <&spdifout>;
+			sound-dai = <&spdifout_a>;
 
 			codec-0 {
 				sound-dai = <&spdif_dit>;
@@ -262,28 +263,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -327,8 +324,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -345,7 +340,7 @@
 
 		interrupt-parent = <&gpio_intc>;
 		/* MAC_INTR on GPIOZ_14 */
-		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -362,8 +357,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &uart_A {
@@ -458,7 +451,7 @@
 	vqmmc-supply = <&flash_1v8>;
 };
 
-&spdifout {
+&spdifout_a {
 	pinctrl-0 = <&spdif_out_h_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index fb0ab27d1f64..1321ad95923d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -17,6 +17,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -26,6 +32,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -35,6 +47,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -44,12 +62,23 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -57,29 +86,10 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <666666666>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
@@ -133,3 +143,7 @@
 		};
 	};
 };
+
+&pmu {
+	compatible = "amlogic,g12a-ddr-pmu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts
new file mode 100644
index 000000000000..ac6f7ae1d103
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-a311d.dtsi"
+#include "meson-g12b-bananapi.dtsi"
+
+/ {
+	compatible = "bananapi,bpi-m2s", "amlogic,a311d", "amlogic,g12b";
+	model = "BananaPi M2S";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+	};
+};
+
+/* Camera (CSI) bus */
+&i2c1 {
+	status = "okay";
+	pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>;
+	pinctrl-names = "default";
+};
+
+/* Display (DSI) bus */
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&npu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
index 124a80901084..9fd68195be3f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
@@ -39,3 +39,7 @@
 	phy-names = "usb2-phy0", "usb2-phy1";
 };
  */
+
+&npu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
new file mode 100644
index 000000000000..82546b738977
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/g12a-clkc.h>
+#include "meson-g12b-a311d.dtsi"
+#include "meson-libretech-cottonwood.dtsi"
+
+/ {
+	compatible = "libretech,aml-a311d-cc", "amlogic,a311d", "amlogic,g12b";
+	model = "Libre Computer AML-A311D-CC Alta";
+
+	vddcpu_a: regulator-vddcpu-a {
+		compatible = "pwm-regulator";
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <730000>;
+		regulator-max-microvolt = <1011000>;
+		regulator-boot-on;
+		regulator-always-on;
+		pwm-supply = <&dc_in>;
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+	};
+
+	sound {
+		model = "LC-ALTA";
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
+				"TDM_C Playback", "TDMOUT_C OUT",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_B IN 0", "TDM_A Capture",
+				"TDMIN_C IN 0", "TDM_A Capture",
+				"TDMIN_A IN 3", "TDM_A Loopback",
+				"TDMIN_B IN 3", "TDM_A Loopback",
+				"TDMIN_C IN 3", "TDM_A Loopback",
+				"TDMIN_A IN 1", "TDM_B Capture",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_C IN 1", "TDM_B Capture",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TDMIN_C IN 4", "TDM_B Loopback",
+				"TDMIN_A IN 2", "TDM_C Capture",
+				"TDMIN_B IN 2", "TDM_C Capture",
+				"TDMIN_C IN 2", "TDM_C Capture",
+				"TDMIN_A IN 5", "TDM_C Loopback",
+				"TDMIN_B IN 5", "TDM_C Loopback",
+				"TDMIN_C IN 5", "TDM_C Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"Lineout", "ACODEC LOLP",
+				"Lineout", "ACODEC LORP";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>, <&pwm_b_x7_pins>;
+};
+
+&npu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
index 8e9ad1e51d66..8ecb5bd125c1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
@@ -14,6 +14,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <761000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
@@ -54,6 +55,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
new file mode 100644
index 000000000000..2d74456e685d
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-bananapi-cm4.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "bananapi,bpi-cm4io", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b";
+	model = "BananaPi BPI-CM4IO Baseboard with BPI-CM4 Module";
+
+	aliases {
+		ethernet0 = &ethmac;
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	hdmi_connector: hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "BPI-CM4IO";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&cecb_AO {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+/* CSI port */
+&i2c1 {
+	status = "okay";
+};
+
+/* DSI port for touchscreen */
+&i2c3 {
+	status = "okay";
+};
+
+/* miniPCIe port with USB + SIM slot */
+&pcie {
+	status = "okay";
+};
+
+&sd_emmc_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+/* Peripheral Only USB-C port */
+&usb {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts
new file mode 100644
index 000000000000..0f48c32bec97
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
+ * Copyright 2023 MNT Research GmbH
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-bananapi-cm4.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	model = "MNT Reform 2 with BPI-CM4 Module";
+	compatible = "mntre,reform2-cm4", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b";
+	chassis-type = "laptop";
+
+	aliases {
+		ethernet0 = &ethmac;
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+	};
+
+	hdmi_connector: hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "MNT-REFORM2-BPI-CM4";
+		audio-widgets = "Headphone", "Headphone Jack",
+				"Speaker", "External Speaker",
+				"Microphone", "Mic Jack";
+		audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmin_b>;
+		audio-routing =	"TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"External Speaker", "SPK_LP",
+				"External Speaker", "SPK_LN",
+				"External Speaker", "SPK_RP",
+				"External Speaker", "SPK_RN",
+				"LINPUT1", "Mic Jack",
+				"Mic Jack", "MICB";
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+					<&clkc CLKID_MPLL0>,
+					<&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* Analog Audio */
+		dai-link-7 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&wm8960>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-8 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+
+	reg_main_1v8: regulator-main-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_main_3v3>;
+	};
+
+	reg_main_1v2: regulator-main-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&reg_main_5v>;
+	};
+
+	reg_main_3v3: regulator-main-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_main_5v: regulator-main-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_main_usb: regulator-main-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_main_5v>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm_AO_ab 0 10000 0>;
+		power-supply = <&reg_main_usb>;
+		enable-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 32 64 128 160 200 255>;
+		default-brightness-level = <6>;
+	};
+
+	panel {
+		compatible = "innolux,n125hce-gn1";
+		power-supply = <&reg_main_3v3>;
+		backlight = <&backlight>;
+		no-hpd;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&edp_bridge_out>;
+			};
+		};
+	};
+
+	clock_12288: clock_12288 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+};
+
+&mipi_analog_dphy {
+	status = "okay";
+};
+
+&mipi_dphy {
+	status = "okay";
+};
+
+&mipi_dsi {
+	status = "okay";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>,
+			  <&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
+			  <&clkc CLKID_MIPI_DSI_PXCLK>,
+			  <&clkc CLKID_CTS_ENCL_SEL>,
+			  <&clkc CLKID_VCLK2_SEL>;
+	assigned-clock-parents = <0>,
+				 <&clkc CLKID_GP0_PLL>,
+				 <0>,
+				 <&clkc CLKID_VCLK2_DIV1>,
+				 <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <936000000>,
+			       <0>,
+			       <936000000>,
+			       <0>,
+			       <0>;
+};
+
+&mipi_dsi_panel_port {
+	mipi_dsi_out: endpoint {
+		remote-endpoint = <&edp_bridge_in>;
+	};
+};
+
+&cecb_AO {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&pwm_AO_ab {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_ao_a_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	edp_bridge: bridge@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+		enable-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_HIGH>; // PIN_24 / GPIO8
+		vccio-supply = <&reg_main_1v8>;
+		vpll-supply = <&reg_main_1v8>;
+		vcca-supply = <&reg_main_1v2>;
+		vcc-supply = <&reg_main_1v2>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				edp_bridge_in: endpoint {
+					remote-endpoint = <&mipi_dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				edp_bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	wm8960: codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&clock_12288>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+		wlf,shared-lrclk;
+	};
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&sd_emmc_b {
+	status = "okay";
+};
+
+&tdmif_a {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tdmif_b {
+	pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>;
+	pinctrl-names = "default";
+
+	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
+			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
+	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+	assigned-clock-rates = <0>, <0>;
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
new file mode 100644
index 000000000000..39011b645128
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+#include "meson-g12b-a311d.dtsi"
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		rtc1 = &vrtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOAO_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	emmc_1v8: regulator-emmc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vddio_c: regulator-vddio-c {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_C";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		enable-gpios = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+
+		gpios = <&gpio_ao GPIOAO_9 GPIO_OPEN_DRAIN>;
+		gpios-states = <1>;
+
+		states = <1800000 0>,
+			 <3300000 1>;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP8756GD DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <680000>;
+		regulator-max-microvolt = <1040000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <680000>;
+		regulator-max-microvolt = <1040000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+/* Ethernet to be enabled in baseboard DT */
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+/* HDMI to be enabled in baseboard DT */
+&hdmi_tx {
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&dc_in>;
+};
+
+/* "Camera" I2C bus */
+&i2c1 {
+	pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>;
+	pinctrl-names = "default";
+};
+
+/* Main I2C bus */
+&i2c2 {
+	pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
+	pinctrl-names = "default";
+};
+
+/* "ID" I2C bus */
+&i2c3 {
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&pcie {
+	reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vddao_1v8>;
+
+	status = "okay";
+};
+
+/* on-module SDIO WiFi */
+&sd_emmc_a {
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	sd-uhs-sdr104;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+
+	status = "okay";
+
+	rtl8822cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+/* SD card to be enabled in baseboard DT */
+&sd_emmc_b {
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_c>;
+};
+
+/* on-module eMMC */
+&sd_emmc_c {
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+/* on-module UART BT */
+&uart_A {
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart_AO {
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb {
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
new file mode 100644
index 000000000000..1b08303c4282
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
@@ -0,0 +1,499 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		rtc1 = &vrtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 4 GiB */
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "RST";
+			linux,code = <KEY_POWER>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	dc_in: regulator-dc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		compatible = "pwm-regulator";
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+		pwm-supply = <&dc_in>;
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		compatible = "pwm-regulator";
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+		pwm-supply = <&vsys_3v3>;
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vsys_3v3: regulator-vsys-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSYS_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	usb_pwr: regulator-usb-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "BPI-M2S";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+/* Main i2c bus */
+&i2c2 {
+	status = "okay";
+	pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
+	pinctrl-names = "default";
+};
+
+&pcie {
+	status = "okay";
+	reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
+};
+
+&pwm_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	/* enable if WiFi/BT board connected */
+	status = "disabled";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	sd-uhs-sdr104;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vsys_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	rtl8822cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vsys_3v3>;
+	vqmmc-supply = <&vsys_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	/* enable if WiFi/BT board connected */
+	status = "disabled";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb2_phy0 {
+	phy-supply = <&dc_in>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&usb_pwr>;
+};
+
+&usb3_pcie_phy {
+	phy-supply = <&usb_pwr>;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts
new file mode 100644
index 000000000000..ecfa1c683dde
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-dreambox.dtsi"
+
+/ {
+	compatible = "dream,dreambox-one", "amlogic,s922x", "amlogic,g12b";
+	model = "Dreambox One";
+};
+
+&sd_emmc_a {
+	sd-uhs-sdr12;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts
new file mode 100644
index 000000000000..df0d71983c3d
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-dreambox.dtsi"
+
+/ {
+	compatible = "dream,dreambox-two", "amlogic,s922x", "amlogic,g12b";
+	model = "Dreambox Two";
+};
+
+&sd_emmc_a {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
new file mode 100644
index 000000000000..8e3e3354ed67
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+#include "meson-g12b-w400.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	cvbs-connector {
+		status = "disabled";
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOA_11 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	spdif_dit: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "DREAMBOX";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* spdif hdmi or toslink interface */
+		dai-link-4 {
+			sound-dai = <&spdifout_a>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-5 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-6 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&ir {
+	linux,rc-map-name = "rc-dreambox";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+&spdifout_a {
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
index 1fa6e75abd21..369c5cf889b6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
@@ -48,6 +48,10 @@
 				"TDMOUT_A IN 2", "FRDDR_C OUT 1",
 				"TDM_A Playback", "TDMOUT_A OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -55,7 +59,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
index afe375fa83ca..654449afd3a4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
@@ -49,6 +49,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -56,7 +60,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
index 5d96c1449050..e20311386745 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
@@ -22,7 +22,6 @@
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -34,9 +33,13 @@
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT",
-				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
-				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
-				"SPDIFOUT IN 2", "FRDDR_C OUT 3";
+				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
 
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
@@ -45,7 +48,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
@@ -76,7 +78,7 @@
 
 		/* spdif hdmi or toslink interface */
 		dai-link-4 {
-			sound-dai = <&spdifout>;
+			sound-dai = <&spdifout_a>;
 
 			codec-0 {
 				sound-dai = <&spdif_dit>;
@@ -140,7 +142,7 @@
 	};
 };
 
-&spdifout {
+&spdifout_a {
 	pinctrl-0 = <&spdif_out_h_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
index 16dd409051b4..fc737499f207 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -51,57 +51,47 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
new file mode 100644
index 000000000000..d5938a4a6da3
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
@@ -0,0 +1,720 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-s922x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "hardkernel,odroid-go-ultra", "amlogic,s922x", "amlogic,g12b";
+	model = "Hardkernel ODROID-GO-Ultra";
+
+	aliases {
+		serial0 = &uart_AO;
+		rtc0 = &vrtc;
+	};
+
+	adc-joystick-left {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 2>, <&saradc 3>;
+		poll-interval = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			linux,code = <ABS_Y>;
+			abs-range = <3150 950>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+		axis@1 {
+			reg = <1>;
+			linux,code = <ABS_X>;
+			abs-range = <700 2900>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+	};
+
+	adc-joystick-right {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 0>, <&saradc 1>;
+		poll-interval = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			linux,code = <ABS_RY>;
+			abs-range = <3150 950>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+		axis@1 {
+			reg = <1>;
+			linux,code = <ABS_RX>;
+			abs-range = <800 3000>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	codec_clk: codec-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <12288000>;
+		clock-output-names = "codec_clk";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <10>;
+		pinctrl-0 = <&keypad_gpio_pins>;
+		pinctrl-names = "default";
+
+		volume-up-button {
+			label = "VOLUME-UP";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpio GPIOX_8 GPIO_ACTIVE_LOW>;
+		};
+		volume-down-button {
+			label = "VOLUME-DOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpio GPIOX_9 GPIO_ACTIVE_LOW>;
+		};
+		dpad-up-button {
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+			gpios = <&gpio GPIOX_0 GPIO_ACTIVE_LOW>;
+		};
+		dpad-down-button {
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+			gpios = <&gpio GPIOX_1 GPIO_ACTIVE_LOW>;
+		};
+		dpad-left-button {
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+			gpios = <&gpio GPIOX_2 GPIO_ACTIVE_LOW>;
+		};
+		dpad-right-button {
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+			gpios = <&gpio GPIOX_3 GPIO_ACTIVE_LOW>;
+		};
+		a-button {
+			label = "A";
+			linux,code = <BTN_EAST>;
+			gpios = <&gpio GPIOX_4 GPIO_ACTIVE_LOW>;
+		};
+		b-button {
+			label = "B";
+			linux,code = <BTN_SOUTH>;
+			gpios = <&gpio GPIOX_5 GPIO_ACTIVE_LOW>;
+		};
+		y-button {
+			label = "Y";
+			linux,code = <BTN_WEST>;
+			gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		};
+		x-button {
+			label = "X";
+			linux,code = <BTN_NORTH>;
+			gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
+		};
+		f1-button {
+			label = "F1";
+			linux,code = <BTN_TRIGGER_HAPPY1>;
+			gpios = <&gpio GPIOX_17 GPIO_ACTIVE_LOW>;
+		};
+		f2-button {
+			label = "F2";
+			linux,code = <BTN_TRIGGER_HAPPY2>;
+			gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
+		};
+		f3-button {
+			label = "F3";
+			linux,code = <BTN_TRIGGER_HAPPY3>;
+			gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>;
+		};
+		f4-button {
+			label = "F4";
+			linux,code = <BTN_TRIGGER_HAPPY4>;
+			gpios = <&gpio GPIOX_12 GPIO_ACTIVE_LOW>;
+		};
+		f5-button {
+			label = "F5";
+			linux,code = <BTN_TRIGGER_HAPPY5>;
+			gpios = <&gpio GPIOX_13 GPIO_ACTIVE_LOW>;
+		};
+		f6-button {
+			label = "F6";
+			linux,code = <BTN_TRIGGER_HAPPY6>;
+			gpios = <&gpio GPIOX_16 GPIO_ACTIVE_LOW>;
+		};
+		top-left-button {
+			label = "TOP Left";
+			linux,code = <BTN_TL>;
+			gpios = <&gpio GPIOX_14 GPIO_ACTIVE_LOW>;
+		};
+		top-left2-button {
+			label = "TOP Left 2";
+			linux,code = <BTN_TL2>;
+			gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>;
+		};
+		top-right-button {
+			label = "TOP Right";
+			linux,code = <BTN_TR>;
+			gpios = <&gpio GPIOX_15 GPIO_ACTIVE_LOW>;
+		};
+		top-right2-button {
+			label = "TOP Right 2";
+			linux,code = <BTN_TR2>;
+			gpios = <&gpio GPIOX_18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vdd_sys: regulator-vdd-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SYS";
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "Odroid GO Ultra";
+		audio-widgets = "Microphone", "Mic Jack",
+				"Headphone", "Headphones",
+				"Speaker", "Internal Speakers";
+		audio-aux-devs = <&tdmout_b>, <&tdmin_b>, <&speaker_amp>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"MICL", "Mic Jack",
+				"Headphones", "HPOL",
+				"Headphones", "HPOR",
+				"Speaker Amplifier INL", "HPOL",
+				"Speaker Amplifier INR", "HPOR",
+				"Internal Speakers", "Speaker Amplifier OUTL",
+				"Internal Speakers", "Speaker Amplifier OUTR";
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&rk817>;
+			};
+		};
+	};
+
+	speaker_amp: speaker-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "Speaker Amplifier";
+		VCC-supply = <&hp_5v>;
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+/* RK817 only supports 12.5mV steps, round up the values */
+&cpu_opp_table_0 {
+	opp-1000000000 {
+		opp-microvolt = <737500>;
+	};
+	opp-1200000000 {
+		opp-microvolt = <737500>;
+	};
+	opp-1398000000 {
+		opp-microvolt = <762500>;
+	};
+	opp-1512000000 {
+		opp-microvolt = <800000>;
+	};
+	opp-1608000000 {
+		opp-microvolt = <837500>;
+	};
+	opp-1704000000 {
+		opp-microvolt = <862500>;
+	};
+	opp-1896000000 {
+		opp-microvolt = <987500>;
+	};
+	opp-1992000000 {
+		opp-microvolt = <1012500>;
+	};
+};
+
+/* RK818 only supports 12.5mV steps, round up the values */
+&cpub_opp_table_1 {
+	opp-1000000000 {
+		opp-microvolt = <775000>;
+	};
+	opp-1200000000 {
+		opp-microvolt = <775000>;
+	};
+	opp-1398000000 {
+		opp-microvolt = <800000>;
+	};
+	opp-1512000000 {
+		opp-microvolt = <825000>;
+	};
+	opp-1608000000 {
+		opp-microvolt = <862500>;
+	};
+	opp-1704000000 {
+		opp-microvolt = <900000>;
+	};
+	opp-1800000000 {
+		opp-microvolt = <987500>;
+	};
+	opp-1908000000 {
+		opp-microvolt = <1025000>;
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
+	pinctrl-names = "default";
+
+	rk818: pmic@1c {
+		compatible = "rockchip,rk818";
+		reg = <0x1c>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <IRQID_GPIOAO_7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */
+		#clock-cells = <1>;
+
+		vcc1-supply = <&vdd_sys>;
+		vcc2-supply = <&vdd_sys>;
+		vcc3-supply = <&vdd_sys>;
+		vcc4-supply = <&vdd_sys>;
+		vcc6-supply = <&vdd_sys>;
+		vcc7-supply = <&vcc_2v3>;
+		vcc8-supply = <&vcc_2v3>;
+		vcc9-supply = <&vddao_3v3>;
+		boost-supply = <&vdd_sys>;
+
+		regulators {
+			vddcpu_a: DCDC_REG1 {
+				regulator-name = "vddcpu_a";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <775000>;
+				regulator-max-microvolt = <1025000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <775000>;
+				};
+			};
+
+			vdd_ee: DCDC_REG2 {
+				regulator-name = "vdd_ee";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <875000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <875000>;
+				};
+			};
+
+			vddq_1v1: DCDC_REG3 {
+				regulator-name = "vddq_1v1";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vddao_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vddao_3v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			hp_5v: DCDC_BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "hp_5v";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vddio_ao1v8: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vddio_ao1v8";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vddq_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vddq_1v8";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vddio_c: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vddio_c";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: SWITCH_REG {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio_intc>;
+
+		interrupts = <IRQID_GPIOAO_5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */
+
+		vcc1-supply = <&vdd_sys>;
+		vcc2-supply = <&vdd_sys>;
+		vcc3-supply = <&vdd_sys>;
+		vcc4-supply = <&vdd_sys>;
+		vcc5-supply = <&vdd_sys>;
+		vcc6-supply = <&vdd_sys>;
+		vcc7-supply = <&vdd_sys>;
+		vcc8-supply = <&vdd_sys>;
+		vcc9-supply = <&rk817_boost>;
+
+		#sound-dai-cells = <0>;
+		clocks = <&codec_clk>;
+		clock-names = "mclk";
+
+		#clock-cells = <1>;
+
+		regulators {
+			vddcpu_b: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <737500>;
+				regulator-max-microvolt = <1012500>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vddcpu_b";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_2v3: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <2400000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_2v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vdd_codec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_lcd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			rk817_boost: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-name = "rk817_boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			usb_host: OTG_SWITCH {
+				regulator-name = "usb_host";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&eth_phy {
+	status = "disabled";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&periphs_pinctrl {
+	keypad_gpio_pins: keypad-gpio-state {
+		mux {
+			groups = "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3",
+			         "GPIOX_4", "GPIOX_5", "GPIOX_6", "GPIOX_7",
+				 "GPIOX_8", "GPIOX_9", "GPIOX_10", "GPIOX_11",
+				 "GPIOX_12", "GPIOX_13", "GPIOX_14",  "GPIOX_15",
+				 "GPIOX_16", "GPIOX_17", "GPIOX_18",  "GPIOX_19";
+			function = "gpio_periphs";
+			bias-pull-up;
+			output-disable;
+		};
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vddio_c>;
+
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+
+&tdmif_b {
+	pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
+			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
+	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+	assigned-clock-rates = <0>, <0>;
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usb2_phy0 {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	status = "okay";
+	phy-supply = <&usb_host>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index fd3fa82e4c33..3bca8023638d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -4,17 +4,11 @@
  * Author: Neil Armstrong <narmstrong@baylibre.com>
  */
 
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
-#include <dt-bindings/sound/meson-g12a-toacodec.h>
-#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+#include "meson-g12b-odroid.dtsi"
 
 / {
 	aliases {
-		serial0 = &uart_AO;
-		ethernet0 = &ethmac;
 		rtc0 = &rtc;
-		rtc1 = &vrtc;
 	};
 
 	dio2133: audio-amplifier-0 {
@@ -25,142 +19,7 @@
 		status = "okay";
 	};
 
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x40000000>;
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-blue {
-			label = "n2:blue";
-			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	tflash_vdd: regulator-tflash_vdd {
-		compatible = "regulator-fixed";
-
-		regulator-name = "TFLASH_VDD";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	tf_io: gpio-regulator-tf_io {
-		compatible = "regulator-gpio";
-
-		regulator-name = "TF_IO";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
-		gpios-states = <0>;
-
-		states = <3300000 0>,
-			 <1800000 1>;
-	};
-
-	flash_1v8: regulator-flash_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "FLASH_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_3v3>;
-		regulator-always-on;
-	};
-
-	main_12v: regulator-main_12v {
-		compatible = "regulator-fixed";
-		regulator-name = "12V";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
-	};
-
-	vcc_5v: regulator-vcc_5v {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&main_12v>;
-		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
-		enable-active-high;
-	};
-
-	vcc_1v8: regulator-vcc_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_3v3>;
-		regulator-always-on;
-	};
-
-	vcc_3v3: regulator-vcc_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-		/* FIXME: actually controlled by VDDCPU_B_EN */
-	};
-
-	vddcpu_a: regulator-vddcpu-a {
-		/*
-		 * MP8756GD Regulator.
-		 */
-		compatible = "pwm-regulator";
-
-		regulator-name = "VDDCPU_A";
-		regulator-min-microvolt = <721000>;
-		regulator-max-microvolt = <1022000>;
-
-		pwm-supply = <&main_12v>;
-
-		pwms = <&pwm_ab 0 1250 0>;
-		pwm-dutycycle-range = <100 0>;
-
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vddcpu_b: regulator-vddcpu-b {
-		/*
-		 * Silergy SY8120B1ABC Regulator.
-		 */
-		compatible = "pwm-regulator";
-
-		regulator-name = "VDDCPU_B";
-		regulator-min-microvolt = <721000>;
-		regulator-max-microvolt = <1022000>;
-
-		pwm-supply = <&main_12v>;
-
-		pwms = <&pwm_AO_cd 1 1250 0>;
-		pwm-dutycycle-range = <100 0>;
-
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	hub_5v: regulator-hub_5v {
+	hub_5v: regulator-hub-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "HUB_5V";
 		regulator-min-microvolt = <5000000>;
@@ -172,44 +31,27 @@
 		enable-active-high;
 	};
 
-	usb_pwr_en: regulator-usb_pwr_en {
-		compatible = "regulator-fixed";
-		regulator-name = "USB_PWR_EN";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc_5v>;
-
-		/* Connected to the microUSB port power enable */
-		gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vddao_1v8: regulator-vddao_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDAO_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-	};
-
-	vddao_3v3: regulator-vddao_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDAO_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&main_12v>;
-		regulator-always-on;
-	};
-
-	hdmi-connector {
-		compatible = "hdmi-connector";
-		type = "a";
+	/* USB hub supports both USB 2.0 and USB 3.0 root hub */
+	usb-hub {
+		dr_mode = "host";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 2.0 hub on port 1 */
+		hub_2_0: hub@1 {
+			compatible = "usb5e3,610";
+			reg = <1>;
+			peer-hub = <&hub_3_0>;
+			vdd-supply = <&usb_pwr_en>;
+		};
 
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_tx_tmds_out>;
-			};
+		/* 3.0 hub on port 4 */
+		hub_3_0: hub@2 {
+			compatible = "usb5e3,620";
+			reg = <2>;
+			peer-hub = <&hub_2_0>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+			vdd-supply = <&vcc_5v>;
 		};
 	};
 
@@ -253,6 +95,10 @@
 				"Lineout", "U19 OUTL",
 				"Lineout", "U19 OUTR";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -260,7 +106,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
@@ -346,68 +191,13 @@
 	status = "okay";
 };
 
-&arb {
-	status = "okay";
-};
-
-&cec_AO {
-	pinctrl-0 = <&cec_ao_a_h_pins>;
-	pinctrl-names = "default";
-	status = "disabled";
-	hdmi-phandle = <&hdmi_tx>;
-};
-
-&cecb_AO {
-	pinctrl-0 = <&cec_ao_b_h_pins>;
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	hdmi-phandle = <&hdmi_tx>;
-};
-
-&clkc_audio {
-	status = "okay";
-};
-
-&cpu0 {
-	cpu-supply = <&vddcpu_b>;
-	operating-points-v2 = <&cpu_opp_table_0>;
-	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
-};
-
-&cpu1 {
-	cpu-supply = <&vddcpu_b>;
-	operating-points-v2 = <&cpu_opp_table_0>;
-	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
-};
-
-&cpu100 {
-	cpu-supply = <&vddcpu_a>;
-	operating-points-v2 = <&cpub_opp_table_1>;
-	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
-};
-
-&cpu101 {
-	cpu-supply = <&vddcpu_a>;
-	operating-points-v2 = <&cpub_opp_table_1>;
-	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
-};
-
-&cpu102 {
-	cpu-supply = <&vddcpu_a>;
-	operating-points-v2 = <&cpub_opp_table_1>;
-	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
-};
-
-&cpu103 {
-	cpu-supply = <&vddcpu_a>;
-	operating-points-v2 = <&cpub_opp_table_1>;
-	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
 };
 
 &ext_mdio {
@@ -422,31 +212,10 @@
 
 		interrupt-parent = <&gpio_intc>;
 		/* MAC_INTR on GPIOZ_14 */
-		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
-&ethmac {
-	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	phy-mode = "rgmii";
-	phy-handle = <&external_phy>;
-	amlogic,tx-delay-ns = <2>;
-};
-
-&frddr_a {
-	status = "okay";
-};
-
-&frddr_b {
-	status = "okay";
-};
-
-&frddr_c {
-	status = "okay";
-};
-
 &gpio {
 	gpio-line-names =
 		/* GPIOZ */
@@ -493,38 +262,6 @@
 		"PIN_3",  /* GPIOX_17 */
 		"PIN_5",  /* GPIOX_18 */
 		"PIN_36"; /* GPIOX_19 */
-	/*
-	 * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	hog-0 {
-		gpio-hog;
-		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
-	};
-};
-
-&hdmi_tx {
-	status = "okay";
-	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
-	pinctrl-names = "default";
-	hdmi-supply = <&vcc_5v>;
-};
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};
-
-&ir {
-	status = "okay";
-	pinctrl-0 = <&remote_input_ao_pins>;
-	pinctrl-names = "default";
-	linux,rc-map-name = "rc-odroid";
 };
 
 &i2c3 {
@@ -539,62 +276,11 @@
 	};
 };
 
-&pwm_ab {
-	pinctrl-0 = <&pwm_a_e_pins>;
-	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
+&ir {
 	status = "okay";
-};
-
-&pwm_AO_cd {
-	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
-	status = "okay";
-};
-
-&saradc {
-	status = "okay";
-	vref-supply = <&vddao_1v8>;
-};
-
-/* SD card */
-&sd_emmc_b {
-	status = "okay";
-	pinctrl-0 = <&sdcard_c_pins>;
-	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	max-frequency = <50000000>;
-	disable-wp;
-
-	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&tflash_vdd>;
-	vqmmc-supply = <&tf_io>;
-
-};
-
-/* eMMC */
-&sd_emmc_c {
-	status = "okay";
-	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
-	pinctrl-1 = <&emmc_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	max-frequency = <200000000>;
-	disable-wp;
-
-	mmc-pwrseq = <&emmc_pwrseq>;
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&flash_1v8>;
+	linux,rc-map-name = "rc-odroid";
 };
 
 /*
@@ -618,73 +304,14 @@
 	};
 };
 
-&tdmif_b {
-	status = "okay";
-};
-
-&tdmif_c {
-	status = "okay";
-};
-
-&tdmin_a {
-	status = "okay";
-};
-
-&tdmin_b {
-	status = "okay";
-};
-
-&tdmin_c {
-	status = "okay";
-};
-
-&tdmin_lb {
-	status = "okay";
-};
-
-&tdmout_b {
-	status = "okay";
-};
-
-&tdmout_c {
-	status = "okay";
-};
-
 &toacodec {
 	status = "okay";
 };
 
-&tohdmitx {
-	status = "okay";
-};
-
-&toddr_a {
-	status = "okay";
-};
-
-&toddr_b {
-	status = "okay";
-};
-
-&toddr_c {
-	status = "okay";
-};
-
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
 &usb {
-	status = "okay";
 	vbus-supply = <&usb_pwr_en>;
 };
 
-&usb2_phy0 {
-	phy-supply = <&vcc_5v>;
-};
-
 &usb2_phy1 {
 	/* Enable the hub which is connected to this port */
 	phy-supply = <&hub_5v>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts
new file mode 100644
index 000000000000..1b9097a30251
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Dongjin Kim <tobetter@gmail.com>
+ */
+
+/dts-v1/;
+
+/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */
+#include "meson-g12b-a311d.dtsi"
+#include "meson-g12b-odroid.dtsi"
+
+/ {
+	compatible = "hardkernel,odroid-n2l", "amlogic,s922x", "amlogic,g12b";
+	model = "Hardkernel ODROID-N2L";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "ODROID-N2L";
+		audio-aux-devs = <&tdmout_b>, <&tdmin_a>, <&tdmin_b>,
+				 <&tdmin_c>, <&tdmin_lb>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TDMIN_C IN 4", "TDM_B Loopback",
+				"TDMIN_LB IN 1", "TDM_B Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"TODDR_A IN 6", "TDMIN_LB OUT",
+				"TODDR_B IN 6", "TDMIN_LB OUT",
+				"TODDR_C IN 6", "TDMIN_LB OUT";
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-7 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&eth_phy {
+	status = "disabled";
+};
+
+&vddcpu_a {
+	regulator-min-microvolt = <680000>;
+	regulator-max-microvolt = <1040000>;
+
+	pwms = <&pwm_ab 0 1500 0>;
+};
+
+&vddcpu_b {
+	regulator-min-microvolt = <680000>;
+	regulator-max-microvolt = <1040000>;
+
+	pwms = <&pwm_AO_cd 1 1500 0>;
+};
+
+&usb2_phy0 {
+	phy-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&usb_pwr_en>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
new file mode 100644
index 000000000000..3298d59833b6
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		rtc1 = &vrtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio_ao GPIOAO_10 GPIO_ACTIVE_HIGH>;
+		/* Using Dummy Speed */
+		gpio-fan,speed-map = <0 0>, <1 1>;
+		#cooling-cells = <2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			label = "n2:blue";
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	tflash_vdd: regulator-tflash-vdd {
+		compatible = "regulator-fixed";
+
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	tf_io: gpio-regulator-tf-io {
+		compatible = "regulator-gpio";
+
+		regulator-name = "TF_IO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+	};
+
+	flash_1v8: regulator-flash-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	main_12v: regulator-main-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	usb_pwr_en: regulator-usb-pwr-en {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR_EN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* Connected to the microUSB port power enable */
+		gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&main_12v>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&main_12v>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * Silergy SY8120B1ABC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&main_12v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&cpu_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&ddr_thermal {
+	trips {
+		ddr_active: ddr-active {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&ddr_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&tflash_vdd>;
+	vqmmc-supply = <&tf_io>;
+
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&flash_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmif_c {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmin_c {
+	status = "okay";
+};
+
+&tdmin_lb {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tdmout_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	phy-supply = <&vcc_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
new file mode 100644
index 000000000000..1e5c6f984945
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
@@ -0,0 +1,503 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ * Copyright (c) 2022 Radxa Limited
+ * Author: Yuntian Zhang <yt@radxa.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-a311d.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "radxa,zero2", "amlogic,a311d", "amlogic,g12b";
+	model = "Radxa Zero2";
+
+	aliases {
+		serial0 = &uart_AO;
+		serial2 = &uart_A;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		cooling-levels = <0 64 128 192 255>;
+		pwms = <&pwm_AO_ab 0 40000 0>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIOA_12 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	ao_5v: regulator-ao-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <730000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&ao_5v>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * Silergy SY8120B1ABC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <730000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&ao_5v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "RADXA-ZERO2";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+
+	wifi32k: clock-0 {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <70000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			trip = <&cpu_active>;
+			cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&gpio {
+	gpio-line-names =
+		/* GPIOZ */
+		"PIN_27", "PIN_28", "PIN_7", "PIN_11", "PIN_13", "PIN_15", "PIN_18", "PIN_40",
+		"", "", "", "", "", "", "", "",
+		/* GPIOH */
+		"", "", "", "", "PIN_19", "PIN_21", "PIN_24", "PIN_23",
+		"",
+		/* BOOT */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "EMMC_PWRSEQ", "", "", "",
+		/* GPIOC */
+		"", "", "", "", "", "", "SD_CD", "PIN_36",
+		/* GPIOA */
+		"PIN_32", "PIN_12", "PIN_35", "", "", "PIN_38", "", "",
+		"", "", "", "", "LED_GREEN", "PIN_31", "PIN_3", "PIN_5",
+		/* GPIOX */
+		"", "", "", "", "", "", "SDIO_PWRSEQ", "",
+		"", "", "", "", "", "", "", "",
+		"", "BT_SHUTDOWN", "", "";
+};
+
+&gpio_ao {
+	gpio-line-names =
+		/* GPIOAO */
+		"PIN_8", "PIN_10", "", "BTN_POWER", "", "", "", "PIN_29",
+		"PIN_33", "PIN_37", "FAN", "",
+		/* GPIOE */
+		"", "", "";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&ao_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "disabled";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm_AO_ab {
+	pinctrl-0 = <&pwm_ao_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts
new file mode 100644
index 000000000000..7f66f263a2ce
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-s922x.dtsi"
+#include "meson-g12b-bananapi.dtsi"
+
+/ {
+	compatible = "bananapi,bpi-m2s", "amlogic,s922x", "amlogic,g12b";
+	model = "BananaPi M2S";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
index 44c23c984034..19cad93a6889 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
@@ -14,6 +14,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
@@ -59,6 +60,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <771000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
index 0c7892600d56..4c1a75b926ee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
@@ -17,7 +17,6 @@
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -29,9 +28,13 @@
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT",
-				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
-				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
-				"SPDIFOUT IN 2", "FRDDR_C OUT 3";
+				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
 
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
@@ -40,7 +43,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
@@ -71,7 +73,7 @@
 
 		/* spdif hdmi or toslink interface */
 		dai-link-4 {
-			sound-dai = <&spdifout>;
+			sound-dai = <&spdifout_a>;
 
 			codec-0 {
 				sound-dai = <&spdif_dit>;
@@ -126,7 +128,7 @@
 	linux,rc-map-name = "rc-khadas";
 };
 
-&spdifout {
+&spdifout_a {
 	pinctrl-0 = <&spdif_out_h_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
index b40d2c1002c9..9b6d780eada7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
@@ -39,7 +39,7 @@
 		clock-names = "ext_clock";
 	};
 
-	flash_1v8: regulator-flash_1v8 {
+	flash_1v8: regulator-flash-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "FLASH_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -48,7 +48,7 @@
 		regulator-always-on;
 	};
 
-	main_12v: regulator-main_12v {
+	main_12v: regulator-main-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "12V";
 		regulator-min-microvolt = <12000000>;
@@ -56,7 +56,7 @@
 		regulator-always-on;
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_5V";
 		regulator-min-microvolt = <5000000>;
@@ -67,7 +67,7 @@
 		enable-active-high;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -76,7 +76,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -213,42 +213,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -269,7 +263,7 @@
 
 		interrupt-parent = <&gpio_intc>;
 		/* MAC_INTR on GPIOZ_14 */
-		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -304,24 +298,18 @@
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
 &pwm_ef {
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
index ee8fcae9f9f0..f04efa828256 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
@@ -49,7 +49,13 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <592>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 			#cooling-cells = <2>;
 		};
 
@@ -59,7 +65,13 @@
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <592>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 			#cooling-cells = <2>;
 		};
 
@@ -69,7 +81,13 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 			#cooling-cells = <2>;
 		};
 
@@ -79,7 +97,13 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 			#cooling-cells = <2>;
 		};
 
@@ -89,7 +113,13 @@
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 			#cooling-cells = <2>;
 		};
 
@@ -99,12 +129,32 @@
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 			#cooling-cells = <2>;
 		};
 
-		l2: l2-cache0 {
+		l2_cache_l: l2-cache-cluster0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;  /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+
+		l2_cache_b: l2-cache-cluster1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>; /* L2. 1MB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 };
@@ -139,3 +189,11 @@
 &mali {
 	dma-coherent;
 };
+
+&pmu {
+	compatible = "amlogic,g12b-ddr-pmu";
+};
+
+&npu {
+	power-domains = <&pwrc PWRC_G12A_NNA_ID>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
index bcdf55f48a83..2da49cfbde77 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
@@ -17,7 +17,7 @@
 		io-channel-names = "buttons";
 		keyup-threshold-microvolt = <1800000>;
 
-		update-button {
+		button-update {
 			label = "update";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <1300000>;
@@ -84,7 +84,7 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -93,7 +93,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -120,7 +120,7 @@
 		};
 	};
 
-	vcc_card: regulator-vcc_card {
+	vcc_card: regulator-vcc-card {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_CARD";
 		regulator-min-microvolt = <3300000>;
@@ -141,7 +141,7 @@
 		gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -150,7 +150,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao3v3: regulator-vddio_ao3v3 {
+	vddio_ao3v3: regulator-vddio-ao3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO3V3";
 		regulator-min-microvolt = <3300000>;
@@ -159,7 +159,7 @@
 		regulator-always-on;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
@@ -194,6 +194,10 @@
 				"AU2 INR", "ACODEC LORN",
 				"7J4-14 LEFT", "AU2 OUTL",
 				"7J4-11 RIGHT", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -201,7 +205,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
@@ -342,24 +345,18 @@
 &pwm_AO_ab {
 	pinctrl-0 = <&pwm_ao_a_3_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_ab {
 	pinctrl-0 = <&pwm_b_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_ef {
 	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index dafc841f7c16..b4f88ed6273b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -26,7 +26,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -51,28 +50,28 @@
 		regulator-always-on;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -98,7 +97,7 @@
 		clock-names = "ext_clock";
 	};
 
-	cvbs-connector {
+	cvbs_connector: cvbs-connector {
 		compatible = "composite-video-connector";
 
 		port {
@@ -130,6 +129,10 @@
 				"AU2 INR", "ACODEC LORN",
 				"Lineout", "AU2 OUTL",
 				"Lineout", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -137,8 +140,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
-
 		dai-link-0 {
 			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
 		};
@@ -239,8 +240,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 023a52005494..c1d8e81d95cb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -95,6 +95,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -105,6 +111,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -115,6 +127,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -125,6 +143,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -132,6 +156,11 @@
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -232,7 +261,7 @@
 			reg = <0x14 0x10>;
 		};
 
-		eth_mac: eth_mac@34 {
+		eth_mac: eth-mac@34 {
 			reg = <0x34 0x10>;
 		};
 
@@ -249,7 +278,7 @@
 		scpi_clocks: clocks {
 			compatible = "arm,scpi-clocks";
 
-			scpi_dvfs: scpi_clocks@0 {
+			scpi_dvfs: clocks-0 {
 				compatible = "arm,scpi-dvfs-clocks";
 				#clock-cells = <1>;
 				clock-indices = <0>;
@@ -327,14 +356,14 @@
 			};
 
 			pwm_ab: pwm@8550 {
-				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				compatible = "amlogic,meson-gxbb-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x08550 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
 			pwm_cd: pwm@8650 {
-				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				compatible = "amlogic,meson-gxbb-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x08650 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";
@@ -349,7 +378,7 @@
 			};
 
 			pwm_ef: pwm@86c0 {
-				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				compatible = "amlogic,meson-gxbb-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x086c0 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";
@@ -496,7 +525,7 @@
 			};
 
 			pwm_AO_ab: pwm@550 {
-				compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
+				compatible = "amlogic,meson-gxbb-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x00550 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";
@@ -531,7 +560,7 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
 
-			hwrng: rng {
+			hwrng: rng@0 {
 				compatible = "amlogic,meson-rng";
 				reg = <0x0 0x0 0x0 0x4>;
 			};
@@ -602,21 +631,21 @@
 			sd_emmc_a: mmc@70000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x70000 0x0 0x800>;
-				interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			sd_emmc_b: mmc@72000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x72000 0x0 0x800>;
-				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			sd_emmc_c: mmc@74000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x74000 0x0 0x800>;
-				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index 6d8cc00fedc7..073b47ce8c3c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -6,21 +6,28 @@
 /dts-v1/;
 
 #include "meson-gxbb-p20x.dtsi"
-
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
 / {
 	compatible = "videostrong,kii-pro", "amlogic,meson-gxbb";
 	model = "Videostrong KII Pro";
 
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		sound-name-prefix = "DIT";
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		status {
+		led {
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 			color = <LED_COLOR_ID_RED>;
 			function = LED_FUNCTION_STATUS;
+			default-state = "off";
 		};
 	};
 
@@ -35,22 +42,62 @@
 		};
 	};
 
-};
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "KII-PRO";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
 
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
 
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
 
-&uart_A {
-	status = "okay";
-	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
 
-	bluetooth {
-		compatible = "brcm,bcm4335a0";
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
 	};
 };
 
-
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_y_pins>;
+	pinctrl-names = "default";
+};
 
 &ethmac {
 	status = "okay";
@@ -78,3 +125,19 @@
 &ir {
 	linux,rc-map-name = "rc-videostrong-kii-pro";
 };
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm4335a0";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index 7d94160f5802..2ecc6ebd5a43 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -135,6 +135,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "NANOPI-K2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -142,7 +146,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
@@ -295,8 +298,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index 63137ce3cb9d..c09da40ff7b0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -78,21 +78,21 @@
 			 <3300000 1>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -142,6 +142,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "NEXBOX-A95X";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -149,7 +153,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
@@ -238,8 +241,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 201596247fd9..12e26f99d4f0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -67,7 +67,7 @@
 		regulator-always-on;
 	};
 
-	hdmi_p5v0: regulator-hdmi_p5v0 {
+	hdmi_p5v0: regulator-hdmi-p5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "HDMI_P5V0";
 		regulator-min-microvolt = <5000000>;
@@ -76,7 +76,7 @@
 		vin-supply = <&p5v0>;
 	};
 
-	tflash_vdd: regulator-tflash_vdd {
+	tflash_vdd: regulator-tflash-vdd {
 		compatible = "regulator-fixed";
 
 		regulator-name = "TFLASH_VDD";
@@ -92,7 +92,7 @@
 		vin-supply = <&vddio_ao3v3>;
 	};
 
-	tf_io: gpio-regulator-tf_io {
+	tf_io: gpio-regulator-tf-io {
 		compatible = "regulator-gpio";
 
 		regulator-name = "TF_IO";
@@ -148,7 +148,7 @@
 		vin-supply = <&p5v0>;
 	};
 
-	ddr3_1v5: regulator-ddr3_1v5 {
+	ddr3_1v5: regulator-ddr3-1v5 {
 		compatible = "regulator-fixed";
 		regulator-name = "DDR3_1V5";
 		regulator-min-microvolt = <1500000>;
@@ -177,6 +177,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "ODROID-C2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -184,7 +188,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
@@ -250,21 +253,6 @@
 	};
 };
 
-&gpio_ao {
-	/*
-	 * WARNING: The USB Hub on the Odroid-C2 needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	hog-0 {
-		gpio-hog;
-		gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
-	};
-};
-
 &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
@@ -360,10 +348,6 @@
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-ddr50;
 	max-frequency = <100000000>;
 	disable-wp;
 
@@ -414,5 +398,16 @@
 };
 
 &usb1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	hub@1 {
+		/* Genesys Logic GL852G USB 2.0 hub */
+		compatible = "usb5e3,610";
+		reg = <1>;
+		vdd-supply = <&p5v0>;
+		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
index 3c93d1898b40..bfac00e76ba3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
@@ -9,19 +9,26 @@
 
 #include "meson-gxbb-p20x.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
 
 / {
 	compatible = "amlogic,p200", "amlogic,meson-gxbb";
 	model = "Amlogic Meson GXBB P200 Development Board";
 
-	avdd18_usb_adc: regulator-avdd18_usb_adc {
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		sound-name-prefix = "DIT";
+	};
+
+	avdd18_usb_adc: regulator-avdd18-usb-adc {
 		compatible = "regulator-fixed";
 		regulator-name = "AVDD18_USB_ADC";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	adc_keys {
+	keys {
 		compatible = "adc-keys";
 		io-channels = <&saradc 0>;
 		io-channel-names = "buttons";
@@ -57,6 +64,62 @@
 			press-threshold-microvolt = <0>; /* 0% */
 		};
 	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "P200";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_y_pins>;
+	pinctrl-names = "default";
 };
 
 &ethmac {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
index 150a82f3b2d7..c10f66031ecd 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
@@ -8,10 +8,53 @@
 /dts-v1/;
 
 #include "meson-gxbb-p20x.dtsi"
+#include <dt-bindings/sound/meson-aiu.h>
 
 / {
 	compatible = "amlogic,p201", "amlogic,meson-gxbb";
 	model = "Amlogic Meson GXBB P201 Development Board";
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "P201";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
 };
 
 &ethmac {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index e803a466fe4e..6f67364fd63f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -53,21 +53,21 @@
 		regulator-settling-time-down-us = <150000>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -150,8 +150,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
@@ -178,9 +176,8 @@
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
 
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 66daf3af34c3..6ff567225fee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -21,7 +21,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -48,28 +47,28 @@
 		enable-active-high;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -109,6 +108,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "VEGA-S95";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -116,7 +119,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
@@ -220,8 +222,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
index 58733017eda8..ec281a9e9e77 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
@@ -16,6 +16,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "WETEK-HUB";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -23,7 +27,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
index 505ffcd8eb76..924414861b72 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -17,7 +17,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -49,6 +48,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "WETEK-PLAY2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -56,7 +59,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index 94dafb955301..bfedfc1472ec 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -49,21 +49,21 @@
 		enable-active-high;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -71,7 +71,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -185,8 +185,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 7c029f552a23..f69923da07fe 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -105,7 +105,7 @@
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -122,7 +122,7 @@
 			mux {
 				groups = "uart_tx_ao_b", "uart_rx_ao_b";
 				function = "uart_ao_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -300,8 +300,8 @@
 };
 
 &gpio_intc {
-	compatible = "amlogic,meson-gpio-intc",
-		     "amlogic,meson-gxbb-gpio-intc";
+	compatible = "amlogic,meson-gxbb-gpio-intc",
+		     "amlogic,meson-gpio-intc";
 	status = "okay";
 };
 
@@ -311,10 +311,16 @@
 		 <&reset RESET_HDMI_SYSTEM_RESET>,
 		 <&reset RESET_HDMI_TX>;
 	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
-		 <&clkc CLKID_CLK81>,
+	clocks = <&clkc CLKID_HDMI>,
+		 <&clkc CLKID_HDMI_PCLK>,
 		 <&clkc CLKID_GCLK_VENCI_INT0>;
 	clock-names = "isfr", "iahb", "venci";
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+
+	assigned-clocks = <&clkc CLKID_HDMI_SEL>,
+			  <&clkc CLKID_HDMI>;
+	assigned-clock-parents = <&xtal>, <0>;
+	assigned-clock-rates = <0>, <24000000>;
 };
 
 &sysctrl {
@@ -427,6 +433,20 @@
 			};
 		};
 
+		spi_idle_high_pins: spi-idle-high-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-up;
+			};
+		};
+
+		spi_idle_low_pins: spi-idle-low-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-down;
+			};
+		};
+
 		spi_ss0_pins: spi-ss0 {
 			mux {
 				groups = "spi_ss0";
@@ -500,7 +520,7 @@
 				groups = "uart_tx_a",
 				       "uart_rx_a";
 				function = "uart_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -518,7 +538,7 @@
 				groups = "uart_tx_b",
 				       "uart_rx_b";
 				function = "uart_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -536,7 +556,7 @@
 				groups = "uart_tx_c",
 				       "uart_rx_c";
 				function = "uart_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -719,6 +739,31 @@
 	};
 };
 
+&pwm_ab {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_AO_ab {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+};
+
+&pwm_cd {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_ef {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
 &pwrc {
 	resets = <&reset RESET_VIU>,
 		 <&reset RESET_VENC>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
index 213a0705ebdc..c6132fb71dfc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
@@ -42,7 +42,7 @@
 		};
 	};
 
-	dc_5v: regulator-dc_5v {
+	dc_5v: regulator-dc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_5V";
 		regulator-min-microvolt = <5000000>;
@@ -89,7 +89,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -98,7 +98,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -107,7 +107,7 @@
 		regulator-always-on;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
@@ -123,6 +123,10 @@
 				"Speaker", "9J5-2 RIGHT";
 		audio-routing = "9J5-3 LEFT", "ACODEC LOLN",
 				"9J5-2 RIGHT", "ACODEC LORN";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -130,7 +134,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
index ff906becd2ab..ca7c4e8e7cac 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
@@ -64,28 +64,28 @@
 		reg = <0x0 0x0 0x0 0x20000000>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -128,6 +128,10 @@
 				"AU2 INR", "ACODEC LORN",
 				"Lineout", "AU2 OUTL",
 				"Lineout", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -135,7 +139,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
@@ -277,8 +280,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* This is connected to the Bluetooth module: */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805y-xiaomi-aquaman.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805y-xiaomi-aquaman.dts
new file mode 100644
index 000000000000..cac15b89c573
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805y-xiaomi-aquaman.dts
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Ferass El Hafidi <funderscore@postmarketos.org>
+ * Heavily based on meson-gxl-s805x-p241.dtb:
+ *  - Copyright (c) 2018 BayLibre, SAS.
+ *    Author: Neil Armstrong <narmstrong@baylibre.com>
+ *    Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+#include "meson-gxl-s805y.dtsi"
+
+/ {
+	compatible = "xiaomi,aquaman", "amlogic,s805y", "amlogic,meson-gxl";
+	model = "Xiaomi Mi TV Stick (aquaman)";
+
+	aliases {
+		serial0 = &uart_AO;
+		serial1 = &uart_A;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-white {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	vddio_boot: regulator-vddio-boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio-ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "XIAOMI-AQUAMAN";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module (Amlogic W155S1 / Realtek RTL8821CS) */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	sdio: wifi@1 {
+		reg = <1>;
+	};
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+};
+
+/*
+ * This is connected to the Bluetooth module
+ * Note: There's no driver for the Bluetooth module of some variants yet.
+ */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+	vbus-supply = <&vcc_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805y.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s805y.dtsi
new file mode 100644
index 000000000000..49b29b71f732
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805y.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Ferass El Hafidi <funderscore@postmarketos.org>
+ */
+
+#include "meson-gxl-s805x.dtsi"
+
+/ {
+	compatible = "amlogic,s805y", "amlogic,meson-gxl";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
index c1470416faad..7dffeb5931c9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
@@ -102,8 +102,7 @@
 };
 
 &sd_emmc_a {
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
index 92c425d0259c..ff9145d49090 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
@@ -21,8 +21,7 @@
 };
 
 &sd_emmc_a {
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
index 9ef210f17b4a..393d3cb33b9e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
@@ -18,7 +18,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led {
 			label = "n1:white:status";
 			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
index b331a013572f..c490dbbf063b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
@@ -79,6 +79,5 @@
 		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		max-speed = <2000000>;
 		clocks = <&wifi32k>;
-		clock-names = "lpo";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
index 6831137c5c10..4ca90ac947b7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -37,28 +37,28 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -86,11 +86,11 @@
 };
 
 &efuse {
-	bt_mac: bt_mac@6 {
+	bt_mac: bt-mac@6 {
 		reg = <0x6 0x6>;
 	};
 
-	wifi_mac: wifi_mac@C {
+	wifi_mac: wifi-mac@c {
 		reg = <0xc 0x6>;
 	};
 };
@@ -116,8 +116,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
@@ -239,7 +237,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c_b_pins>;
 
-	pcf8563: pcf8563@51 {
+	pcf8563: rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 		status = "okay";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
index c8d74e61dec1..62a2da766a00 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
@@ -42,21 +42,21 @@
 			 <3300000 1>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -115,8 +115,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* SD card */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index 6ab1cc125b96..4e89d6f6bb57 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -67,6 +67,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "KHADAS-VIM";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -74,7 +78,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
@@ -140,7 +143,6 @@
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 };
@@ -209,8 +211,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal> , <&xtal>;
-	clock-names = "clkin0", "clkin1" ;
 };
 
 &pwm_ef {
@@ -219,21 +219,6 @@
 
 &sd_emmc_a {
 	max-frequency = <100000000>;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-&uart_A {
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
-		max-speed = <2000000>;
-		clocks = <&wifi32k>;
-		clock-names = "lpo";
-	};
 };
 
 /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
index 874f91c348ec..6cbdfde00e12 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
@@ -67,7 +67,7 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -76,7 +76,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -93,7 +93,7 @@
 		regulator-always-on;
 	};
 
-	vcc_card: regulator-vcc_card {
+	vcc_card: regulator-vcc-card {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_CARD";
 		regulator-min-microvolt = <3300000>;
@@ -114,7 +114,7 @@
 		gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
 	};
 
-	vddio_ao3v3: regulator-vddio_ao3v3 {
+	vddio_ao3v3: regulator-vddio-ao3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO3V3";
 		regulator-min-microvolt = <3300000>;
@@ -139,7 +139,7 @@
 		regulator-settling-time-down-us = <50000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -148,7 +148,7 @@
 		regulator-always-on;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC 1V8";
 		regulator-min-microvolt = <1800000>;
@@ -160,6 +160,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "LIBRETECH-CC-V2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -167,7 +171,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
@@ -305,7 +308,6 @@
 };
 
 &usb2_phy0 {
-	pinctrl-names = "default";
 	phy-supply = <&vcc5v>;
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index 82bfabfbd39c..401064b0428d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -93,7 +93,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -117,7 +117,7 @@
 		regulator-settling-time-down-us = <50000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -125,7 +125,7 @@
 	};
 
 	/* This is provided by LDOs on the eMMC daugther card */
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
@@ -142,6 +142,10 @@
 				"AU2 INR", "ACODEC LORN",
 				"Lineout", "AU2 OUTL",
 				"Lineout", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -149,7 +153,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index f1acca5c4434..236cedec9f19 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -42,21 +42,21 @@
 			 <3300000 1>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -145,8 +145,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
index 2602940c2077..8b41e340f919 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
@@ -7,11 +7,19 @@
 /dts-v1/;
 
 #include "meson-gxl-s905x-p212.dtsi"
+#include <dt-bindings/sound/meson-aiu.h>
 
 / {
 	compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
 	model = "Amlogic Meson GXL (S905X) P212 Development Board";
 
+	dio2133: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&hdmi_5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
 	cvbs-connector {
 		compatible = "composite-video-connector";
 
@@ -32,6 +40,70 @@
 			};
 		};
 	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "S905X-P212";
+		audio-aux-devs = <&dio2133>;
+		audio-widgets = "Line", "Lineout";
+		audio-routing = "AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"Lineout", "AU2 OUTL",
+				"Lineout", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
 };
 
 &cec_AO {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
index 05cb2f5e5c36..05a0d4de3ad7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -39,28 +39,28 @@
 		regulator-always-on;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -97,6 +97,12 @@
 	pinctrl-names = "default";
 };
 
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+};
+
 &saradc {
 	status = "okay";
 	vref-supply = <&vddio_ao18>;
@@ -125,6 +131,10 @@
 
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
+
+	sdio: wifi@1 {
+		reg = <1>;
+	};
 };
 
 /* SD card */
@@ -165,14 +175,6 @@
 	vqmmc-supply = <&vddio_boot>;
 };
 
-&pwm_ef {
-	status = "okay";
-	pinctrl-0 = <&pwm_e_pins>;
-	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
-};
-
 /* This is connected to the Bluetooth module: */
 &uart_A {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts
new file mode 100644
index 000000000000..a9c5881c9783
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x-p212.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "osmc,vero4k", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "OSMC Vero 4K";
+
+	reserved-memory {
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-standby {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			panic-indicator;
+		};
+	};
+
+	dio2133: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&hdmi_5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		sound-name-prefix = "DIT";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "VERO4K";
+		audio-aux-devs = <&dio2133>;
+		audio-widgets = "Line", "Lineout";
+		audio-routing = "AU2 INL", "ACODEC LOLP",
+				"AU2 INR", "ACODEC LORP",
+				"AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"Lineout", "AU2 OUTL",
+				"Lineout", "AU2 OUTR";
+
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-5 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index c3ac531c4f84..ba535010a3c9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -163,7 +163,7 @@
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -180,7 +180,7 @@
 			mux {
 				groups = "uart_tx_ao_b", "uart_rx_ao_b";
 				function = "uart_ao_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -188,7 +188,7 @@
 			mux {
 				groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
 				function = "uart_ao_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -214,7 +214,7 @@
 				groups = "i2c_sck_ao",
 				       "i2c_sda_ao";
 				function = "i2c_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -312,8 +312,8 @@
 };
 
 &gpio_intc {
-	compatible = "amlogic,meson-gpio-intc",
-		     "amlogic,meson-gxl-gpio-intc";
+	compatible = "amlogic,meson-gxl-gpio-intc",
+		     "amlogic,meson-gpio-intc";
 	status = "okay";
 };
 
@@ -323,10 +323,16 @@
 		 <&reset RESET_HDMI_SYSTEM_RESET>,
 		 <&reset RESET_HDMI_TX>;
 	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
-		 <&clkc CLKID_CLK81>,
+	clocks = <&clkc CLKID_HDMI>,
+		 <&clkc CLKID_HDMI_PCLK>,
 		 <&clkc CLKID_GCLK_VENCI_INT0>;
 	clock-names = "isfr", "iahb", "venci";
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+
+	assigned-clocks = <&clkc CLKID_HDMI_SEL>,
+			  <&clkc CLKID_HDMI>;
+	assigned-clock-parents = <&xtal>, <0>;
+	assigned-clock-rates = <0>, <24000000>;
 };
 
 &sysctrl {
@@ -429,6 +435,20 @@
 			};
 		};
 
+		spi_idle_high_pins: spi-idle-high-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-up;
+			};
+		};
+
+		spi_idle_low_pins: spi-idle-low-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-down;
+			};
+		};
+
 		spi_ss0_pins: spi-ss0 {
 			mux {
 				groups = "spi_ss0";
@@ -502,7 +522,7 @@
 				groups = "uart_tx_a",
 				       "uart_rx_a";
 				function = "uart_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -520,7 +540,7 @@
 				groups = "uart_tx_b",
 				       "uart_rx_b";
 				function = "uart_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -538,7 +558,7 @@
 				groups = "uart_tx_c",
 				       "uart_rx_c";
 				function = "uart_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -556,7 +576,7 @@
 				groups = "i2c_sck_a",
 				     "i2c_sda_a";
 				function = "i2c_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -565,7 +585,7 @@
 				groups = "i2c_sck_b",
 				      "i2c_sda_b";
 				function = "i2c_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -574,7 +594,7 @@
 				groups = "i2c_sck_c",
 				      "i2c_sda_c";
 				function = "i2c_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -583,7 +603,7 @@
 				groups = "i2c_sck_c_dv19",
 				      "i2c_sda_c_dv18";
 				function = "i2c_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -759,16 +779,23 @@
 		};
 	};
 
-	eth-phy-mux {
-		compatible = "mdio-mux-mmioreg", "mdio-mux";
+	eth_phy_mux: mdio@558 {
+		reg = <0x0 0x558 0x0 0xc>;
+		compatible = "amlogic,gxl-mdio-mux";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		reg = <0x0 0x55c 0x0 0x4>;
-		mux-mask = <0xffffffff>;
+		clocks = <&clkc CLKID_FCLK_DIV4>;
+		clock-names = "ref";
 		mdio-parent-bus = <&mdio0>;
 
-		internal_mdio: mdio@e40908ff {
-			reg = <0xe40908ff>;
+		external_mdio: mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		internal_mdio: mdio@1 {
+			reg = <0x1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
@@ -779,15 +806,34 @@
 				max-speed = <100>;
 			};
 		};
-
-		external_mdio: mdio@2009087f {
-			reg = <0x2009087f>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
 	};
 };
 
+&pwm_ab {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_AO_ab {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+};
+
+&pwm_cd {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_ef {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
 &pwrc {
 	resets = <&reset RESET_VIU>,
 		 <&reset RESET_VENC>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts b/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts
new file mode 100644
index 000000000000..1221f4545130
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,p271", "amlogic,s905l", "amlogic,meson-gxlx";
+	model = "Amlogic Meson GXLX (S905L) P271 Development Board";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	sound {
+		model = "P271";
+	};
+};
+
+&apb {
+	mali: gpu@c0000 {
+		/* Mali 450-MP2 */
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp", "gpmmu", "pp", "pmu",
+			"pp0", "ppmmu0", "pp1", "ppmmu1";
+	};
+};
+
+&saradc {
+	compatible = "amlogic,meson-gxlx-saradc", "amlogic,meson-saradc";
+};
+
+&usb {
+	dr_mode = "host";
+};
+
+&vdec {
+	compatible = "amlogic,gxlx-vdec", "amlogic,gx-vdec";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts
new file mode 100644
index 000000000000..2c267884cc16
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "azw,gt1-ultimate", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Beelink GT1 Ultimate";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-white {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index f43c45daf7eb..2a09b3d550e2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -52,10 +52,11 @@
 		gpios = <&gpio GPIODV_14 GPIO_ACTIVE_HIGH
 			 &gpio GPIODV_15 GPIO_ACTIVE_HIGH>;
 		/* Dummy RPM values since fan is optional */
-		gpio-fan,speed-map = <0 0
-				      1 1
-				      2 2
-				      3 3>;
+		gpio-fan,speed-map =
+				<0 0>,
+				<1 1>,
+				<2 2>,
+				<3 3>;
 		#cooling-cells = <2>;
 	};
 
@@ -111,28 +112,28 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -149,6 +150,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "KHADAS-VIM2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -156,7 +161,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
@@ -270,7 +274,6 @@
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 };
@@ -286,16 +289,12 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &pwm_ef {
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &sd_emmc_a {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts
index b8ef3bd8b840..1703da3235ea 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts
@@ -89,7 +89,6 @@
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		wakeup-source;
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index 236c0a144142..773107cc47dd 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -28,7 +28,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -87,6 +86,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "NEXBOX-A1";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -94,7 +97,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
index d4858afa0e9c..feb31207773f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
@@ -72,8 +72,7 @@
 };
 
 &sd_emmc_a {
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
index d02b80d77378..6c8bec1853ac 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
@@ -21,8 +21,7 @@
 };
 
 &sd_emmc_a {
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
index 50137aafab10..9d5a481b309f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -37,7 +37,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -102,6 +101,10 @@
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "RBOX-PRO";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -109,7 +112,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
@@ -190,8 +192,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
@@ -217,7 +217,7 @@
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
 
-	brcmf: brcmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
index 444c249863cb..a66f19851ac9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
@@ -14,7 +14,7 @@
 		     "amlogic,meson-gxm";
 	model = "Libre Computer AML-S912-PC";
 
-	typec2_vbus: regulator-typec2_vbus {
+	typec2_vbus: regulator-typec2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "TYPEC2_VBUS";
 		regulator-min-microvolt = <5000000>;
@@ -54,6 +54,10 @@
 		vbus-supply = <&typec2_vbus>;
 
 		status = "okay";
+
+		connector {
+			compatible = "usb-c-connector";
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-ugoos-am3.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-ugoos-am3.dts
new file mode 100644
index 000000000000..ba871f3f53bb
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-ugoos-am3.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ *
+ * Debug UART (3.3V, 115200 baud) at the corner of the board:
+ *   (4) (3) (2) [1]
+ *   Vcc RXD TXD GND
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "ugoos,am3", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Ugoos AM3";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+};
+
+&cvbs_connector {
+	/* Not used on this board */
+	status = "disabled";
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+
+	status = "okay";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_b_pins>;
+
+	rtc: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+/* WLAN: Atheros 10k (QCA9377) */
+&sd_emmc_a {
+	max-frequency = <200000000>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	max-frequency = <100000000>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index 411cc312fc62..514c9bea6423 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -64,6 +64,12 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
@@ -75,6 +81,12 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
@@ -86,6 +98,12 @@
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
@@ -97,6 +115,12 @@
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3-ts050.dtso b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3-ts050.dtso
new file mode 100644
index 000000000000..a41b4e619580
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3-ts050.dtso
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/g12a-clkc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
+
+/dts-v1/;
+/plugin/;
+
+/*
+ * Enable Khadas TS050 DSI Panel + Touch Controller
+ * on Khadas VIM3 (A311D) and VIM3L (S905D3)
+ */
+
+&{/} {
+	panel_backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm_AO_cd 0 25000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <200>;
+	};
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	touch-controller@38 {
+		compatible = "edt,edt-ft5206";
+		reg = <0x38>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <IRQID_GPIOA_5 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio_expander 6 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1920>;
+		status = "okay";
+	};
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>,
+			  <&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
+			  <&clkc CLKID_MIPI_DSI_PXCLK>,
+			  <&clkc CLKID_CTS_ENCL_SEL>,
+			  <&clkc CLKID_VCLK2_SEL>;
+	assigned-clock-parents = <0>,
+				 <&clkc CLKID_GP0_PLL>,
+				 <0>,
+				 <&clkc CLKID_VCLK2_DIV1>,
+				 <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <960000000>,
+			       <0>,
+			       <960000000>,
+			       <0>,
+			       <0>;
+
+	panel@0 {
+		compatible = "khadas,ts050";
+		reset-gpios = <&gpio_expander 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpio_expander 1 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vcc_3v3>;
+		backlight = <&panel_backlight>;
+		reg = <0>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+};
+
+&mipi_analog_dphy {
+	status = "okay";
+};
+
+&mipi_dphy {
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_c_6_pins>, <&pwm_ao_d_e_pins>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index c9705941e4ab..7daa9b122d5c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -80,7 +80,7 @@
 		clock-names = "ext_clock";
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -88,7 +88,7 @@
 		regulator-always-on;
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_5V";
 		regulator-min-microvolt = <5000000>;
@@ -99,7 +99,7 @@
 		enable-active-high;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -108,7 +108,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -118,7 +118,7 @@
 		/* FIXME: actually controlled by VDDCPU_B_EN */
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO1V8";
 		regulator-min-microvolt = <1800000>;
@@ -127,7 +127,7 @@
 		regulator-always-on;
 	};
 
-	emmc_1v8: regulator-emmc_1v8 {
+	emmc_1v8: regulator-emmc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "EMMC_AO1V8";
 		regulator-min-microvolt = <1800000>;
@@ -136,7 +136,7 @@
 		regulator-always-on;
 	};
 
-	vsys_3v3: regulator-vsys_3v3 {
+	vsys_3v3: regulator-vsys-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VSYS_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -145,7 +145,7 @@
 		regulator-always-on;
 	};
 
-	usb_pwr: regulator-usb_pwr {
+	usb_pwr: regulator-usb-pwr {
 		compatible = "regulator-fixed";
 		regulator-name = "USB_PWR";
 		regulator-min-microvolt = <5000000>;
@@ -182,6 +182,10 @@
 				"TODDR_B IN 0", "TDMIN_A OUT",
 				"TODDR_C IN 0", "TDMIN_A OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -189,7 +193,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
new file mode 100644
index 000000000000..ac9c4c2673b1
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
@@ -0,0 +1,612 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+#include <dt-bindings/clock/g12a-clkc.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		spi0 = &spifc;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dioo2133: audio-amplifier-0 {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio GPIOX_0 GPIO_ACTIVE_HIGH>;
+		VCC-supply = <&vcc_5v>;
+		sound-name-prefix = "10U2";
+	};
+
+	/* TOFIX: handle CVBS_DET on SARADC channel 0 */
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	led-blue {
+		compatible = "pwm-leds";
+
+		led {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_ACTIVITY;
+			linux,default-trigger = "heartbeat";
+			max-brightness = <255>;
+			pwms = <&pwm_ab 1 1250 0>;
+			active-low;
+		};
+	};
+
+	led-green {
+		compatible = "pwm-leds";
+
+		led {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			linux,default-trigger = "default-on";
+			max-brightness = <255>;
+			pwms = <&pwm_cd 1 1250 0>;
+			active-low;
+		};
+	};
+
+	led-orange {
+		compatible = "gpio-leds";
+
+		led {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_STANDBY;
+			gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+	};
+
+	dc_in: regulator-dc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	flash_1v8: regulator-flash-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_card: regulator-vcc-card {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_CARD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOX_2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		enable-active-high;
+		gpio-open-drain;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vddao_3v3>;
+
+		/* FIXME: controlled by TEST_N */
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&dc_in>;
+		gpio = <&gpio GPIOH_8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		enable-active-high;
+		gpio-open-drain;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&dc_in>;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		compatible = "pwm-regulator";
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <730000>;
+		regulator-max-microvolt = <1011000>;
+		regulator-boot-on;
+		regulator-always-on;
+		pwm-supply = <&dc_in>;
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+	};
+
+	vddio_ao18: regulator-vddio-ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vddao_3v3>;
+	};
+
+	vddio_c: regulator-vddio-c {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_C";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-settling-time-up-us = <200>;
+		regulator-settling-time-down-us = <50000>;
+		vin-supply = <&vddao_3v3>;
+		gpios = <&gpio GPIOX_4 GPIO_ACTIVE_HIGH>;
+		states = <3300000 0>,
+			 <1800000 1>;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		audio-widgets = "Line", "Lineout";
+		audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>,
+				 <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
+				 <&dioo2133>;
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/*
+		 * Audio setup: The 40 pins header provides access to 2 TDMs,
+		 * SPDIF In/Out and PDM inputs.
+		 * - TDM A: 2 lanes
+		 *    D0:    40/X9
+		 *    D1:    38/X8
+		 *    BCLK:  12/X11
+		 *    FS:    35/X10
+		 * - TDM B: 4 lanes
+		 *    D0:    37/A3
+		 *    D1:    16/A4
+		 *    D2:    18/A5 or 7/AO6
+		 *    D3:    22/A6 or 21/H5
+		 *    BCLK:  29/A1 or 8/AO8
+		 *    FS:    31/A2 or 11/AO7
+		 * - 2 Master Clocks:
+		 *    MCLK0: 15/A0 or 10/AO9
+		 *    MCLK1: 33/X15
+		 * - SPDIF:
+		 *    OUT:   32/A11
+		 *    IN:    21/H5
+		 * - PDM Input:
+		 *    DO:    13/A8
+		 *    D1:    26/A9
+		 *    D2:    22/A6
+		 *    D3:    18/A5
+		 *    DCLK:  36/A7
+		 *
+		 * TDM C is not usable on the 40 pins connector so it is
+		 * setup for the HDMI 4 lanes i2s.
+		 *
+		 * No pinctrl is enabled by default to preserve the
+		 * genericity of the 40 pins header. Many configurations are
+		 * possible based on the desired use case. Please adjust TDM
+		 * masks, clock setups and pinctrl accordingly.
+		 */
+
+		dai-link-6 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "dsp_a";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_A>;
+			};
+		};
+
+		dai-link-7 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-rx-mask-1 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_B>;
+			};
+		};
+
+		dai-link-8 {
+			sound-dai = <&tdmif_c>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_C>;
+			};
+		};
+
+		dai-link-9 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-10 {
+			sound-dai = <&toacodec TOACODEC_OUT>;
+
+			codec {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	status = "okay";
+	AVDD-supply = <&vddio_ao18>;
+};
+
+&arb {
+	status = "okay";
+};
+
+&cecb_AO {
+	status = "okay";
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&dwc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub: hub@1 {
+		compatible = "usb5e3,626";
+		reg = <1>;
+		reset-gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&vcc_5v>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>, <&eth_phy_irq_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <100000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&periphs_pinctrl {
+	spi_cs_disable_pins: spi-cs-disable {
+		mux {
+			groups = "BOOT_14";
+			function = "gpio_periphs";
+			bias-disable;
+			output-high;
+		};
+	};
+
+	eth_phy_irq_pins: eth-phy-irq {
+		mux {
+			groups = "GPIOZ_14";
+			function = "gpio_periphs";
+			bias-pull-up;
+			output-disable;
+		};
+	};
+};
+
+&pwm_AO_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_b_x7_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_d_x3_pins>;
+	pinctrl-names = "default";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vcc_card>;
+	vqmmc-supply = <&vddio_c>;
+};
+
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>,
+		    <&spi_cs_disable_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&flash_1v8>;
+};
+
+&spifc {
+	status = "disabled";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpio BOOT_14 GPIO_ACTIVE_LOW>;
+
+	w25lq128d: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <80000000>;
+	};
+};
+
+&tdmif_a {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmif_c {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmin_c {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tdmout_c {
+	status = "okay";
+};
+
+&toacodec {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb2_phy1 {
+	phy-supply = <&dc_in>;
+};
+
+&usb3_pcie_phy {
+	phy-supply = <&vcc_5v>;
+};
+
+&usb {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
index 8ffbcb2b1ac5..6730c44642d2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
@@ -15,7 +15,7 @@
 	#size-cells = <2>;
 
 	aliases {
-		serial0 = &uart_B;
+		serial0 = &uart_b;
 	};
 
 	memory@0 {
@@ -23,8 +23,215 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 52 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x3400000>;
+			no-map;
+		};
+	};
+
+	sdio_32k: sdio-32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&sdio_32k>;
+		clock-names = "ext_clock";
+	};
+
+	main_12v: regulator-main-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio-ao1v8 {
+	       compatible = "regulator-fixed";
+	       regulator-name = "VDDIO_AO1V8";
+	       regulator-min-microvolt = <1800000>;
+	       regulator-max-microvolt = <1800000>;
+	       vin-supply = <&vddao_3v3>;
+	       regulator-always-on;
+	};
+
+	/* SY8120B1ABC DC/DC Regulator. */
+	vddcpu: regulator-vddcpu {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <689000>;
+		regulator-max-microvolt = <1049000>;
+
+		vin-supply = <&main_12v>;
+
+		pwms = <&pwm_ij 1 1500 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+		/* Voltage Duty-Cycle */
+		voltage-table = <1049000 0>,
+				<1039000 3>,
+				<1029000 6>,
+				<1019000 9>,
+				<1009000 12>,
+				<999000 14>,
+				<989000 17>,
+				<979000 20>,
+				<969000 23>,
+				<959000 26>,
+				<949000 29>,
+				<939000 31>,
+				<929000 34>,
+				<919000 37>,
+				<909000 40>,
+				<899000 43>,
+				<889000 45>,
+				<879000 48>,
+				<869000 51>,
+				<859000 54>,
+				<849000 56>,
+				<839000 59>,
+				<829000 62>,
+				<819000 65>,
+				<809000 68>,
+				<799000 70>,
+				<789000 73>,
+				<779000 76>,
+				<769000 79>,
+				<759000 81>,
+				<749000 84>,
+				<739000 87>,
+				<729000 89>,
+				<719000 92>,
+				<709000 95>,
+				<699000 98>,
+				<689000 100>;
+	};
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins1>;
+	pinctrl-names = "default";
+};
+
+&pwm_ij {
+	status = "okay";
+};
+
+&uart_b {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_pins>;
+	pinctrl-names = "default";
+};
+
+&sdio {
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	no-sd;
+	no-mmc;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+&sd {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+&nand {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-on-flash-bbt;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x00200000>;
+		};
+		partition@200000 {
+			label = "env";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "system";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "rootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "media";
+			reg = <0x04000000 0x8000000>;
+		};
+	};
+};
+
+&spicc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spicc0_pins_x>;
+	cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
 };
 
-&uart_B {
+&ethmac {
 	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index ad50cba42d19..9d99ed2994df 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -6,6 +6,11 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-s4-gpio.h>
+#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
+#include <dt-bindings/power/meson-s4-power.h>
+#include <dt-bindings/reset/amlogic,meson-s4-reset.h>
 
 / {
 	cpus {
@@ -61,10 +66,15 @@
 		#clock-cells = <0>;
 	};
 
-	pwrc: power-controller {
-		compatible = "amlogic,meson-s4-pwrc";
-		#power-domain-cells = <1>;
-		status = "okay";
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gxbb-sm";
+
+			pwrc: power-controller {
+				compatible = "amlogic,meson-s4-pwrc";
+				#power-domain-cells = <1>;
+			};
+		};
 	};
 
 	soc {
@@ -85,13 +95,51 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
-		apb4: apb4@fe000000 {
+		apb4: bus@fe000000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xfe000000 0x0 0x480000>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			clkc_periphs: clock-controller@0 {
+				compatible = "amlogic,s4-peripherals-clkc";
+				reg = <0x0 0x0 0x0 0x49c>;
+				clocks = <&clkc_pll CLKID_FCLK_DIV2>,
+					<&clkc_pll CLKID_FCLK_DIV2P5>,
+					<&clkc_pll CLKID_FCLK_DIV3>,
+					<&clkc_pll CLKID_FCLK_DIV4>,
+					<&clkc_pll CLKID_FCLK_DIV5>,
+					<&clkc_pll CLKID_FCLK_DIV7>,
+					<&clkc_pll CLKID_HIFI_PLL>,
+					<&clkc_pll CLKID_GP0_PLL>,
+					<&clkc_pll CLKID_MPLL0>,
+					<&clkc_pll CLKID_MPLL1>,
+					<&clkc_pll CLKID_MPLL2>,
+					<&clkc_pll CLKID_MPLL3>,
+					<&clkc_pll CLKID_HDMI_PLL>,
+					<&xtal>;
+				clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3",
+						"fclk_div4", "fclk_div5", "fclk_div7",
+						"hifi_pll", "gp0_pll", "mpll0", "mpll1",
+						"mpll2", "mpll3", "hdmi_pll", "xtal";
+				#clock-cells = <1>;
+			};
+
+			clkc_pll: clock-controller@8000 {
+				compatible = "amlogic,s4-pll-clkc";
+				reg = <0x0 0x8000 0x0 0x1e8>;
+				clocks = <&xtal>;
+				clock-names = "xtal";
+				#clock-cells = <1>;
+			};
+
+			watchdog@2100 {
+				compatible = "amlogic,s4-wdt", "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
 			periphs_pinctrl: pinctrl@4000 {
 				compatible = "amlogic,meson-s4-periphs-pinctrl";
 				#address-cells = <2>;
@@ -106,6 +154,436 @@
 					#gpio-cells = <2>;
 					gpio-ranges = <&periphs_pinctrl 0 0 82>;
 				};
+
+				remote_pins: remote-pin {
+					mux {
+						groups = "remote_in";
+						function = "remote_in";
+						bias-disable;
+					};
+				};
+
+				i2c0_pins1: i2c0-pins1 {
+					mux {
+						groups = "i2c0_sda",
+						       "i2c0_scl";
+						function = "i2c0";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins1: i2c1-pins1 {
+					mux {
+						groups = "i2c1_sda_c",
+						       "i2c1_scl_c";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins2: i2c1-pins2 {
+					mux {
+						groups = "i2c1_sda_d",
+						       "i2c1_scl_d";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins3: i2c1-pins3 {
+					mux {
+						groups = "i2c1_sda_h",
+						       "i2c1_scl_h";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins4: i2c1-pins4 {
+					mux {
+						groups = "i2c1_sda_x",
+						       "i2c1_scl_x";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c2_pins1: i2c2-pins1 {
+					mux {
+						groups = "i2c2_sda_d",
+						       "i2c2_scl_d";
+						function = "i2c2";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c2_pins2: i2c2-pins2 {
+					mux {
+						groups = "i2c2_sda_h8",
+						       "i2c2_scl_h9";
+						function = "i2c2";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c2_pins3: i2c2-pins3 {
+					mux {
+						groups = "i2c2_sda_h0",
+						       "i2c2_scl_h1";
+						function = "i2c2";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c3_pins1: i2c3-pins1 {
+					mux {
+						groups = "i2c3_sda_x",
+						       "i2c3_scl_x";
+						function = "i2c3";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c3_pins2: i2c3-pins2 {
+					mux {
+						groups = "i2c3_sda_z",
+						       "i2c3_scl_z";
+						function = "i2c3";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c4_pins1: i2c4-pins1 {
+					mux {
+						groups = "i2c4_sda_c",
+						       "i2c4_scl_c";
+						function = "i2c4";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c4_pins2: i2c4-pins2 {
+					mux {
+						groups = "i2c4_sda_d",
+						       "i2c4_scl_d";
+						function = "i2c4";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c4_pins3: i2c4-pins3 {
+					mux {
+						groups = "i2c4_sda_z",
+						       "i2c4_scl_z";
+						function = "i2c4";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				nand_pins: nand-pins {
+					mux {
+						groups = "emmc_nand_d0",
+						       "emmc_nand_d1",
+						       "emmc_nand_d2",
+						       "emmc_nand_d3",
+						       "emmc_nand_d4",
+						       "emmc_nand_d5",
+						       "emmc_nand_d6",
+						       "emmc_nand_d7",
+						       "nand_ce0",
+						       "nand_ale",
+						       "nand_cle",
+						       "nand_wen_clk",
+						       "nand_ren_wr";
+						function = "nand";
+						input-enable;
+					};
+				};
+
+				pwm_a_pins1: pwm-a-pins1 {
+					mux {
+						groups = "pwm_a_d";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins2: pwm-a-pins2 {
+					mux {
+						groups = "pwm_a_x";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_b_pins1: pwm-b-pins1 {
+					mux {
+						groups = "pwm_b_d";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_b_pins2: pwm-b-pins2 {
+					mux {
+						groups = "pwm_b_x";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_c_pins1: pwm-c-pins1 {
+					mux {
+						groups = "pwm_c_d";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_c_pins2: pwm-c-pins2 {
+					mux {
+						groups = "pwm_c_x";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_d_pins1: pwm-d-pins1 {
+					mux {
+						groups = "pwm_d_d";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_d_pins2: pwm-d-pins2 {
+					mux {
+						groups = "pwm_d_h";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_e_pins1: pwm-e-pins1 {
+					mux {
+						groups = "pwm_e_x";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins2: pwm-e-pins2 {
+					mux {
+						groups = "pwm_e_z";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_f_pins1: pwm-f-pins1 {
+					mux {
+						groups = "pwm_f_x";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_f_pins2: pwm-f-pins2 {
+					mux {
+						groups = "pwm_f_z";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_g_pins1: pwm-g-pins1 {
+					mux {
+						groups = "pwm_g_d";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_g_pins2: pwm-g-pins2 {
+					mux {
+						groups = "pwm_g_z";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_h_pins: pwm-h-pins {
+					mux {
+						groups = "pwm_h";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_i_pins1: pwm-i-pins1 {
+					mux {
+						groups = "pwm_i_d";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_i_pins2: pwm-i-pins2 {
+					mux {
+						groups = "pwm_i_h";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_j_pins: pwm-j-pins {
+					mux {
+						groups = "pwm_j";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_a_hiz_pins: pwm-a-hiz-pins {
+					mux {
+						groups = "pwm_a_hiz";
+						function = "pwm_a_hiz";
+					};
+				};
+
+				pwm_b_hiz_pins: pwm-b-hiz-pins {
+					mux {
+						groups = "pwm_b_hiz";
+						function = "pwm_b_hiz";
+					};
+				};
+
+				pwm_c_hiz_pins: pwm-c-hiz-pins {
+					mux {
+						groups = "pwm_c_hiz";
+						function = "pwm_c_hiz";
+					};
+				};
+
+				pwm_g_hiz_pins: pwm-g-hiz-pins {
+					mux {
+						groups = "pwm_g_hiz";
+						function = "pwm_g_hiz";
+					};
+				};
+
+				sdcard_pins: sdcard-pins {
+					mux {
+						groups = "sdcard_d0_c",
+							 "sdcard_d1_c",
+							 "sdcard_d2_c",
+							 "sdcard_d3_c",
+							 "sdcard_clk_c",
+							 "sdcard_cmd_c";
+						function = "sdcard";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdcard_clk_gate_pins: sdcard-clk-gate-pins {
+					mux {
+						groups = "GPIOC_4";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				emmc_pins: emmc-pins {
+					mux-0 {
+						groups = "emmc_nand_d0",
+							 "emmc_nand_d1",
+							 "emmc_nand_d2",
+							 "emmc_nand_d3",
+							 "emmc_nand_d4",
+							 "emmc_nand_d5",
+							 "emmc_nand_d6",
+							 "emmc_nand_d7",
+							 "emmc_cmd";
+						function = "emmc";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+					mux-1 {
+						groups = "emmc_clk";
+						function = "emmc";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				emmc_ds_pins: emmc-ds-pins {
+					mux {
+						groups = "emmc_nand_ds";
+						function = "emmc";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				emmc_clk_gate_pins: emmc-clk-gate-pins {
+					mux {
+						groups = "GPIOB_8";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdio_pins: sdio-pins {
+					mux {
+						groups = "sdio_d0",
+							 "sdio_d1",
+							 "sdio_d2",
+							 "sdio_d3",
+							 "sdio_clk",
+							 "sdio_cmd";
+						function = "sdio";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdio_clk_gate_pins: sdio-clk-gate-pins {
+					mux {
+						groups = "GPIOX_4";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				spicc0_pins_x: spicc0-pins_x {
+					mux {
+						groups = "spi_a_mosi_x",
+						       "spi_a_miso_x",
+						       "spi_a_clk_x";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins_h: spicc0-pins-h {
+					mux {
+						groups = "spi_a_mosi_h",
+						       "spi_a_miso_h",
+						       "spi_a_clk_h";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins_z: spicc0-pins-z {
+					mux {
+						groups = "spi_a_mosi_z",
+						       "spi_a_miso_z",
+						       "spi_a_clk_z";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
 			};
 
 			gpio_intc: interrupt-controller@4080 {
@@ -118,14 +596,170 @@
 					<10 11 12 13 14 15 16 17 18 19 20 21>;
 			};
 
-			uart_B: serial@7a000 {
+			eth_phy: mdio-multiplexer@28000 {
+				compatible = "amlogic,g12a-mdio-mux";
+				reg = <0x0 0x28000 0x0 0xa4>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_ETHPHY>,
+					 <&xtal>,
+					 <&clkc_pll CLKID_MPLL_50M>;
+				clock-names = "pclk", "clkin0", "clkin1";
+				mdio-parent-bus = <&mdio0>;
+
+				ext_mdio: mdio@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				int_mdio: mdio@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					internal_ephy: ethernet-phy@8 {
+						compatible = "ethernet-phy-id0180.3301",
+							     "ethernet-phy-ieee802.3-c22";
+						interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+						reg = <8>;
+						max-speed = <100>;
+					};
+				};
+			};
+
+			clk_msr: clock-measure@48000 {
+				compatible = "amlogic,s4-clk-measure";
+				reg = <0x0 0x48000 0x0 0x1c>;
+			};
+
+			spicc0: spi@50000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x50000 0x0 0x44>;
+				interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_SPICC0>,
+					 <&clkc_periphs CLKID_SPICC0_EN>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_ab: pwm@58000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x58000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_A>,
+					 <&clkc_periphs CLKID_PWM_B>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@5a000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5a000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_C>,
+					 <&clkc_periphs CLKID_PWM_D>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm@5c000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5c000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_E>,
+					 <&clkc_periphs CLKID_PWM_F>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_gh: pwm@5e000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5e000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_G>,
+					 <&clkc_periphs CLKID_PWM_H>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ij: pwm@60000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x60000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_I>,
+					 <&clkc_periphs CLKID_PWM_J>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@66000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x66000 0x0 0x20>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_A>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@68000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x68000 0x0 0x20>;
+				interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_B>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@6a000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6a000 0x0 0x20>;
+				interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@6c000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6c000 0x0 0x20>;
+				interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_D>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@6e000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6e000 0x0 0x20>;
+				interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_E>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			nand: nand-controller@8c800 {
+				compatible = "amlogic,meson-axg-nfc";
+				reg = <0x0 0x8c800 0x0 0x100>, <0x0 0x8c000 0x0 0x4>;
+				reg-names = "nfc", "emmc";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_SD_EMMC_C>,
+					<&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core", "device";
+				status = "disabled";
+			};
+
+			uart_b: serial@7a000 {
 				compatible = "amlogic,meson-s4-uart",
 					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x7a000 0x0 0x18>;
 				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clocks = <&xtal>, <&clkc_periphs CLKID_UART_B>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
 			};
 
 			reset: reset-controller@2000 {
@@ -133,6 +767,91 @@
 				reg = <0x0 0x2000 0x0 0x98>;
 				#reset-cells = <1>;
 			};
+
+			sec_ao: ao-secure@10220 {
+				compatible = "amlogic,s4-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
+			ir: ir@84040 {
+				compatible = "amlogic,meson-s4-ir";
+				reg = <0x0 0x84040 0x0 0x30>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			hwrng: rng@440788 {
+				compatible = "amlogic,meson-s4-rng";
+				reg = <0x0 0x440788 0x0 0x0c>;
+			};
+		};
+
+		ethmac: ethernet@fdc00000 {
+			compatible = "amlogic,meson-axg-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xfdc00000 0x0 0x10000>,
+			      <0x0 0xfe024000 0x0 0x8>;
+
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			power-domains = <&pwrc PWRC_S4_ETH_ID>;
+			clocks = <&clkc_periphs CLKID_ETH>,
+				 <&clkc_pll CLKID_FCLK_DIV2>,
+				 <&clkc_pll CLKID_MPLL2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			status = "disabled";
+
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+		};
+
+		sdio: mmc@fe088000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xfe088000 0x0 0x800>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc_periphs CLKID_SDEMMC_A>,
+				 <&xtal>,
+				 <&clkc_pll CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_A>;
+			cap-sdio-irq;
+			keep-power-in-suspend;
+			status = "disabled";
+		};
+
+		sd: mmc@fe08a000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xfe08a000 0x0 0x800>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_periphs CLKID_SDEMMC_B>,
+				 <&clkc_periphs CLKID_SD_EMMC_B>,
+				 <&clkc_pll CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_B>;
+			status = "disabled";
+		};
+
+		emmc: mmc@fe08c000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xfe08c000 0x0 0x800>;
+			interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_periphs CLKID_NAND>,
+				 <&xtal>,
+				 <&clkc_pll CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_NAND_EMMC>;
+			no-sdio;
+			no-sd;
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
index d1debccdc1c2..3c43d3490e14 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
@@ -22,6 +22,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -29,7 +33,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
@@ -100,7 +103,7 @@
 
 		interrupt-parent = <&gpio_intc>;
 		/* MAC_INTR on GPIOZ_14 */
-		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
index c94f2870b78b..445c1671ede7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
@@ -22,6 +22,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -29,7 +33,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
index 46a34731f7e2..9be3084b090d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
@@ -54,7 +54,7 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -63,7 +63,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -71,7 +71,7 @@
 		regulator-always-on;
 	};
 
-	emmc_1v8: regulator-emmc_1v8 {
+	emmc_1v8: regulator-emmc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "EMMC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -80,7 +80,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -105,7 +105,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao1v8: regulator-vddio_ao1v8 {
+	vddio_ao1v8: regulator-vddio-ao1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO1V8";
 		regulator-min-microvolt = <1800000>;
@@ -147,28 +147,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -199,15 +195,11 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -215,8 +207,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
new file mode 100644
index 000000000000..eeaff22edade
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-bananapi.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "bananapi,bpi-m2-pro", "amlogic,sm1";
+	model = "Banana Pi BPI-M2-PRO";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "BPI-M2-PRO";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
index cadba194b149..697855fec476 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
@@ -6,10 +6,7 @@
 
 /dts-v1/;
 
-#include "meson-sm1.dtsi"
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include "meson-sm1-bananapi.dtsi"
 #include <dt-bindings/sound/meson-g12a-toacodec.h>
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
@@ -17,28 +14,6 @@
 	compatible = "bananapi,bpi-m5", "amlogic,sm1";
 	model = "Banana Pi BPI-M5";
 
-	adc_keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 2>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1800000>;
-
-		key {
-			label = "SW3";
-			linux,code = <BTN_3>;
-			press-threshold-microvolt = <1700000>;
-		};
-	};
-
-	aliases {
-		serial0 = &uart_AO;
-		ethernet0 = &ethmac;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	/* TOFIX: handle CVBS_DET on SARADC channel 0 */
 	cvbs-connector {
 		compatible = "composite-video-connector";
@@ -50,150 +25,6 @@
 		};
 	};
 
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key {
-			label = "SW1";
-			linux,code = <BTN_1>;
-			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
-			interrupt-parent = <&gpio_intc>;
-			interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
-		};
-	};
-
-	hdmi-connector {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_tx_tmds_out>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		green {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
-		};
-
-		blue {
-			color = <LED_COLOR_ID_BLUE>;
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x40000000>;
-	};
-
-	emmc_1v8: regulator-emmc_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "EMMC_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-	};
-
-	dc_in: regulator-dc_in {
-		compatible = "regulator-fixed";
-		regulator-name = "DC_IN";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	vddio_c: regulator-vddio_c {
-		compatible = "regulator-gpio";
-		regulator-name = "VDDIO_C";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-
-		gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>;
-		gpios-states = <1>;
-
-		states = <1800000 0>,
-			 <3300000 1>;
-	};
-
-	tflash_vdd: regulator-tflash_vdd {
-		compatible = "regulator-fixed";
-		regulator-name = "TFLASH_VDD";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_in>;
-		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	vddao_1v8: regulator-vddao_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDAO_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vddao_3v3>;
-		regulator-always-on;
-	};
-
-	vddao_3v3: regulator-vddao_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDAO_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_in>;
-		regulator-always-on;
-	};
-
-	vddcpu: regulator-vddcpu {
-		/*
-		 * SY8120B1ABC DC/DC Regulator.
-		 */
-		compatible = "pwm-regulator";
-
-		regulator-name = "VDDCPU";
-		regulator-min-microvolt = <690000>;
-		regulator-max-microvolt = <1050000>;
-
-		pwm-supply = <&dc_in>;
-
-		pwms = <&pwm_AO_cd 1 1250 0>;
-		pwm-dutycycle-range = <100 0>;
-
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	/* USB Hub Power Enable */
-	vl_pwr_en: regulator-vl_pwr_en {
-		compatible = "regulator-fixed";
-		regulator-name = "VL_PWR_EN";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_in>;
-
-		gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
 	sound {
 		compatible = "amlogic,axg-sound-card";
 		model = "BPI-M5";
@@ -226,6 +57,10 @@
 				"Lineout", "ACODEC LOLP",
 				"Lineout", "ACODEC LORP";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -233,7 +68,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
@@ -319,68 +153,17 @@
 	status = "okay";
 };
 
-&arb {
-	status = "okay";
-};
 
 &clkc_audio {
 	status = "okay";
 };
 
-&cpu0 {
-	cpu-supply = <&vddcpu>;
-	operating-points-v2 = <&cpu_opp_table>;
-	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
-};
-
-&cpu1 {
-	cpu-supply = <&vddcpu>;
-	operating-points-v2 = <&cpu_opp_table>;
-	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
-};
-
-&cpu2 {
-	cpu-supply = <&vddcpu>;
-	operating-points-v2 = <&cpu_opp_table>;
-	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
-};
-
-&cpu3 {
-	cpu-supply = <&vddcpu>;
-	operating-points-v2 = <&cpu_opp_table>;
-	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
-};
-
 &cvbs_vdac_port {
 	cvbs_vdac_out: endpoint {
 		remote-endpoint = <&cvbs_connector_in>;
 	};
 };
 
-&ext_mdio {
-	external_phy: ethernet-phy@0 {
-		/* Realtek RTL8211F (0x001cc916) */
-		reg = <0>;
-		max-speed = <1000>;
-
-		interrupt-parent = <&gpio_intc>;
-		/* MAC_INTR on GPIOZ_14 */
-		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&ethmac {
-	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	phy-mode = "rgmii-txid";
-	phy-handle = <&external_phy>;
-};
-
 &frddr_a {
 	status = "okay";
 };
@@ -393,192 +176,6 @@
 	status = "okay";
 };
 
-&gpio {
-	gpio-line-names =
-		/* GPIOZ */
-		"ETH_MDIO", /* GPIOZ_0 */
-		"ETH_MDC", /* GPIOZ_1 */
-		"ETH_RXCLK", /* GPIOZ_2 */
-		"ETH_RX_DV", /* GPIOZ_3 */
-		"ETH_RXD0", /* GPIOZ_4 */
-		"ETH_RXD1", /* GPIOZ_5 */
-		"ETH_RXD2", /* GPIOZ_6 */
-		"ETH_RXD3", /* GPIOZ_7 */
-		"ETH_TXCLK", /* GPIOZ_8 */
-		"ETH_TXEN", /* GPIOZ_9 */
-		"ETH_TXD0", /* GPIOZ_10 */
-		"ETH_TXD1", /* GPIOZ_11 */
-		"ETH_TXD2", /* GPIOZ_12 */
-		"ETH_TXD3", /* GPIOZ_13 */
-		"ETH_INTR", /* GPIOZ_14 */
-		"ETH_NRST", /* GPIOZ_15 */
-		/* GPIOH */
-		"HDMI_SDA", /* GPIOH_0 */
-		"HDMI_SCL", /* GPIOH_1 */
-		"HDMI_HPD", /* GPIOH_2 */
-		"HDMI_CEC", /* GPIOH_3 */
-		"VL-RST_N", /* GPIOH_4 */
-		"CON1-P36", /* GPIOH_5 */
-		"VL-PWREN", /* GPIOH_6 */
-		"WiFi_3V3_1V8", /* GPIOH_7 */
-		"TFLASH_VDD_EN", /* GPIOH_8 */
-		/* BOOT */
-		"eMMC_D0", /* BOOT_0 */
-		"eMMC_D1", /* BOOT_1 */
-		"eMMC_D2", /* BOOT_2 */
-		"eMMC_D3", /* BOOT_3 */
-		"eMMC_D4", /* BOOT_4 */
-		"eMMC_D5", /* BOOT_5 */
-		"eMMC_D6", /* BOOT_6 */
-		"eMMC_D7", /* BOOT_7 */
-		"eMMC_CLK", /* BOOT_8 */
-		"",
-		"eMMC_CMD", /* BOOT_10 */
-		"",
-		"eMMC_RST#", /* BOOT_12 */
-		"eMMC_DS", /* BOOT_13 */
-		"", "",
-		/* GPIOC */
-		"SD_D0_B", /* GPIOC_0 */
-		"SD_D1_B", /* GPIOC_1 */
-		"SD_D2_B", /* GPIOC_2 */
-		"SD_D3_B", /* GPIOC_3 */
-		"SD_CLK_B", /* GPIOC_4 */
-		"SD_CMD_B", /* GPIOC_5 */
-		"CARD_EN_DET", /* GPIOC_6 */
-		"",
-		/* GPIOA */
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "",
-		"CON1-P27", /* GPIOA_14 */
-		"CON1-P28", /* GPIOA_15 */
-		/* GPIOX */
-		"CON1-P16", /* GPIOX_0 */
-		"CON1-P18", /* GPIOX_1 */
-		"CON1-P22", /* GPIOX_2 */
-		"CON1-P11", /* GPIOX_3 */
-		"CON1-P13", /* GPIOX_4 */
-		"CON1-P07", /* GPIOX_5 */
-		"CON1-P33", /* GPIOX_6 */
-		"CON1-P15", /* GPIOX_7 */
-		"CON1-P19", /* GPIOX_8 */
-		"CON1-P21", /* GPIOX_9 */
-		"CON1-P24", /* GPIOX_10 */
-		"CON1-P23", /* GPIOX_11 */
-		"CON1-P08", /* GPIOX_12 */
-		"CON1-P10", /* GPIOX_13 */
-		"CON1-P29", /* GPIOX_14 */
-		"CON1-P31", /* GPIOX_15 */
-		"CON1-P26", /* GPIOX_16 */
-		"CON1-P03", /* GPIOX_17 */
-		"CON1-P05", /* GPIOX_18 */
-		"CON1-P32"; /* GPIOX_19 */
-
-	/*
-	 * WARNING: The USB Hub on the BPI-M5 needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	usb-hub {
-		gpio-hog;
-		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
-	};
-};
-
-&gpio_ao {
-	gpio-line-names =
-		/* GPIOAO */
-		"DEBUG TX", /* GPIOAO_0 */
-		"DEBUG RX", /* GPIOAO_1 */
-		"SYS_LED2", /* GPIOAO_2 */
-		"UPDATE_KEY", /* GPIOAO_3 */
-		"CON1-P40", /* GPIOAO_4 */
-		"IR_IN", /* GPIOAO_5 */
-		"TF_3V3N_1V8_EN", /* GPIOAO_6 */
-		"CON1-P35", /* GPIOAO_7 */
-		"CON1-P12", /* GPIOAO_8 */
-		"CON1-P37", /* GPIOAO_9 */
-		"CON1-P38", /* GPIOAO_10 */
-		"SYS_LED", /* GPIOAO_11 */
-		/* GPIOE */
-		"VDDEE_PWM", /* GPIOE_0 */
-		"VDDCPU_PWM", /* GPIOE_1 */
-		"TF_PWR_EN"; /* GPIOE_2 */
-};
-
-&hdmi_tx {
-	status = "okay";
-	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
-	pinctrl-names = "default";
-	hdmi-supply = <&dc_in>;
-};
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};
-
-&ir {
-	status = "okay";
-	pinctrl-0 = <&remote_input_ao_pins>;
-	pinctrl-names = "default";
-};
-
-&pwm_AO_cd {
-	pinctrl-0 = <&pwm_ao_d_e_pins>;
-	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
-	status = "okay";
-};
-
-&saradc {
-	status = "okay";
-	vref-supply = <&vddao_1v8>;
-};
-
-/* SD card */
-&sd_emmc_b {
-	status = "okay";
-	pinctrl-0 = <&sdcard_c_pins>;
-	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	max-frequency = <50000000>;
-	disable-wp;
-
-	/* TOFIX: SD card is barely usable in SDR modes */
-
-	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&tflash_vdd>;
-	vqmmc-supply = <&vddio_c>;
-};
-
-/* eMMC */
-&sd_emmc_c {
-	status = "okay";
-	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
-	pinctrl-1 = <&emmc_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	max-frequency = <200000000>;
-	disable-wp;
-
-	mmc-pwrseq = <&emmc_pwrseq>;
-	vmmc-supply = <&vddao_3v3>;
-	vqmmc-supply = <&emmc_1v8>;
-};
-
 &tdmif_b {
 	status = "okay";
 };
@@ -626,22 +223,3 @@
 &toddr_c {
 	status = "okay";
 };
-
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb2_phy0 {
-	phy-supply = <&dc_in>;
-};
-
-&usb2_phy1 {
-	/* Enable the hub which is connected to this port */
-	phy-supply = <&vl_pwr_en>;
-};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
new file mode 100644
index 000000000000..5e07f0f9538e
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
@@ -0,0 +1,428 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-sw3 {
+			label = "SW3";
+			linux,code = <BTN_3>;
+			press-threshold-microvolt = <1700000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key {
+			label = "SW1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_1v8: regulator-emmc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vddio_c: regulator-vddio-c {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_C";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+
+		gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>;
+		gpios-states = <1>;
+
+		states = <1800000 0>,
+			 <3300000 1>;
+	};
+
+	tflash_vdd: regulator-tflash-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	/* USB Hub Power Enable */
+	vl_pwr_en: regulator-vl-pwr-en {
+		compatible = "regulator-fixed";
+		regulator-name = "VL_PWR_EN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+
+		gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+};
+
+&gpio {
+	gpio-line-names =
+		/* GPIOZ */
+		"ETH_MDIO", /* GPIOZ_0 */
+		"ETH_MDC", /* GPIOZ_1 */
+		"ETH_RXCLK", /* GPIOZ_2 */
+		"ETH_RX_DV", /* GPIOZ_3 */
+		"ETH_RXD0", /* GPIOZ_4 */
+		"ETH_RXD1", /* GPIOZ_5 */
+		"ETH_RXD2", /* GPIOZ_6 */
+		"ETH_RXD3", /* GPIOZ_7 */
+		"ETH_TXCLK", /* GPIOZ_8 */
+		"ETH_TXEN", /* GPIOZ_9 */
+		"ETH_TXD0", /* GPIOZ_10 */
+		"ETH_TXD1", /* GPIOZ_11 */
+		"ETH_TXD2", /* GPIOZ_12 */
+		"ETH_TXD3", /* GPIOZ_13 */
+		"ETH_INTR", /* GPIOZ_14 */
+		"ETH_NRST", /* GPIOZ_15 */
+		/* GPIOH */
+		"HDMI_SDA", /* GPIOH_0 */
+		"HDMI_SCL", /* GPIOH_1 */
+		"HDMI_HPD", /* GPIOH_2 */
+		"HDMI_CEC", /* GPIOH_3 */
+		"VL-RST_N", /* GPIOH_4 */
+		"CON1-P36", /* GPIOH_5 */
+		"VL-PWREN", /* GPIOH_6 */
+		"WiFi_3V3_1V8", /* GPIOH_7 */
+		"TFLASH_VDD_EN", /* GPIOH_8 */
+		/* BOOT */
+		"eMMC_D0", /* BOOT_0 */
+		"eMMC_D1", /* BOOT_1 */
+		"eMMC_D2", /* BOOT_2 */
+		"eMMC_D3", /* BOOT_3 */
+		"eMMC_D4", /* BOOT_4 */
+		"eMMC_D5", /* BOOT_5 */
+		"eMMC_D6", /* BOOT_6 */
+		"eMMC_D7", /* BOOT_7 */
+		"eMMC_CLK", /* BOOT_8 */
+		"",
+		"eMMC_CMD", /* BOOT_10 */
+		"",
+		"eMMC_RST#", /* BOOT_12 */
+		"eMMC_DS", /* BOOT_13 */
+		"", "",
+		/* GPIOC */
+		"SD_D0_B", /* GPIOC_0 */
+		"SD_D1_B", /* GPIOC_1 */
+		"SD_D2_B", /* GPIOC_2 */
+		"SD_D3_B", /* GPIOC_3 */
+		"SD_CLK_B", /* GPIOC_4 */
+		"SD_CMD_B", /* GPIOC_5 */
+		"CARD_EN_DET", /* GPIOC_6 */
+		"",
+		/* GPIOA */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "",
+		"CON1-P27", /* GPIOA_14 */
+		"CON1-P28", /* GPIOA_15 */
+		/* GPIOX */
+		"CON1-P16", /* GPIOX_0 */
+		"CON1-P18", /* GPIOX_1 */
+		"CON1-P22", /* GPIOX_2 */
+		"CON1-P11", /* GPIOX_3 */
+		"CON1-P13", /* GPIOX_4 */
+		"CON1-P07", /* GPIOX_5 */
+		"CON1-P33", /* GPIOX_6 */
+		"CON1-P15", /* GPIOX_7 */
+		"CON1-P19", /* GPIOX_8 */
+		"CON1-P21", /* GPIOX_9 */
+		"CON1-P24", /* GPIOX_10 */
+		"CON1-P23", /* GPIOX_11 */
+		"CON1-P08", /* GPIOX_12 */
+		"CON1-P10", /* GPIOX_13 */
+		"CON1-P29", /* GPIOX_14 */
+		"CON1-P31", /* GPIOX_15 */
+		"CON1-P26", /* GPIOX_16 */
+		"CON1-P03", /* GPIOX_17 */
+		"CON1-P05", /* GPIOX_18 */
+		"CON1-P32"; /* GPIOX_19 */
+
+	/*
+	 * WARNING: The USB Hub needs a reset signal to be turned high in
+	 * order to be detected by the USB Controller. This signal should
+	 * be handled by a USB specific power sequence to reset the Hub
+	 * when the USB bus is powered down.
+	 */
+	usb-hub-hog {
+		gpio-hog;
+		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&gpio_ao {
+	gpio-line-names =
+		/* GPIOAO */
+		"DEBUG TX", /* GPIOAO_0 */
+		"DEBUG RX", /* GPIOAO_1 */
+		"SYS_LED2", /* GPIOAO_2 */
+		"UPDATE_KEY", /* GPIOAO_3 */
+		"CON1-P40", /* GPIOAO_4 */
+		"IR_IN", /* GPIOAO_5 */
+		"TF_3V3N_1V8_EN", /* GPIOAO_6 */
+		"CON1-P35", /* GPIOAO_7 */
+		"CON1-P12", /* GPIOAO_8 */
+		"CON1-P37", /* GPIOAO_9 */
+		"CON1-P38", /* GPIOAO_10 */
+		"SYS_LED", /* GPIOAO_11 */
+		/* GPIOE */
+		"VDDEE_PWM", /* GPIOE_0 */
+		"VDDCPU_PWM", /* GPIOE_1 */
+		"TF_PWR_EN"; /* GPIOE_2 */
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&dc_in>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	/* Boot failures are observed at 50MHz */
+	max-frequency = <35000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&tflash_vdd>;
+	vqmmc-supply = <&vddio_c>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	phy-supply = <&dc_in>;
+};
+
+&usb2_phy1 {
+	/* Enable the hub which is connected to this port */
+	phy-supply = <&vl_pwr_en>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
index 0f6660e68e72..7b3a014d4cde 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
@@ -22,6 +22,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -29,7 +33,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
@@ -100,7 +103,7 @@
 
 		interrupt-parent = <&gpio_intc>;
 		/* MAC_INTR on GPIOZ_14 */
-		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index 9c0b544e2209..a3d9b66b6878 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -51,35 +51,29 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
index 8c30ce63686e..d04768a66bfe 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -26,20 +26,30 @@
 	sound {
 		model = "ODROID-C4";
 	};
-};
 
-&gpio {
-	/*
-	 * WARNING: The USB Hub on the Odroid-C4 needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	hog-0 {
-		gpio-hog;
-		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
+	/* USB hub supports both USB 2.0 and USB 3.0 root hub */
+	usb-hub {
+		dr_mode = "host";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 2.0 hub on port 1 */
+		hub_2_0: hub@1 {
+			compatible = "usb2109,2817";
+			reg = <1>;
+			peer-hub = <&hub_3_0>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+			vdd-supply = <&vcc_5v>;
+		};
+
+		/* 3.1 hub on port 4 */
+		hub_3_0: hub@2 {
+			compatible = "usb2109,817";
+			reg = <2>;
+			peer-hub = <&hub_2_0>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+			vdd-supply = <&vcc_5v>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
index e3486f60645a..0170139b8d32 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -19,8 +19,6 @@
 	fan0: pwm-fan {
 		compatible = "pwm-fan";
 		#cooling-cells = <2>;
-		cooling-min-state = <0>;
-		cooling-max-state = <3>;
 		cooling-levels = <0 120 170 220>;
 		pwms = <&pwm_cd 1 40000 0>;
 	};
@@ -45,7 +43,7 @@
 	};
 
 	/* Powers the SATA Disk 0 regulator, which is enabled when a disk load is detected */
-	p12v_0: regulator-p12v_0 {
+	p12v_0: regulator-p12v-0 {
 		compatible = "regulator-fixed";
 		regulator-name = "P12V_0";
 		regulator-min-microvolt = <12000000>;
@@ -58,7 +56,7 @@
 	};
 
 	/* Powers the SATA Disk 1 regulator, which is enabled when a disk load is detected */
-	p12v_1: regulator-p12v_1 {
+	p12v_1: regulator-p12v-1 {
 		compatible = "regulator-fixed";
 		regulator-name = "P12V_1";
 		regulator-min-microvolt = <12000000>;
@@ -76,9 +74,17 @@
 };
 
 &cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
 	cooling-maps {
 		map {
-			trip = <&cpu_passive>;
+			trip = <&cpu_active>;
 			cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 		};
 	};
@@ -131,10 +137,6 @@
 };
 
 &usb {
-	phys = <&usb2_phy1>;
-	phy-names = "usb2-phy1";
-};
-
-&usb2_phy0 {
-	status = "disabled";
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index ddb1b345397f..c4524eb4f099 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -28,7 +28,7 @@
 		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
 	};
 
-	tflash_vdd: regulator-tflash_vdd {
+	tflash_vdd: regulator-tflash-vdd {
 		compatible = "regulator-fixed";
 
 		regulator-name = "TFLASH_VDD";
@@ -40,7 +40,7 @@
 		regulator-always-on;
 	};
 
-	tf_io: gpio-regulator-tf_io {
+	tf_io: gpio-regulator-tf-io {
 		compatible = "regulator-gpio";
 
 		regulator-name = "TF_IO";
@@ -48,7 +48,7 @@
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_5v>;
 
-		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
+		enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 
@@ -59,7 +59,7 @@
 			 <1800000 1>;
 	};
 
-	flash_1v8: regulator-flash_1v8 {
+	flash_1v8: regulator-flash-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "FLASH_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -68,7 +68,7 @@
 		regulator-always-on;
 	};
 
-	main_12v: regulator-main_12v {
+	main_12v: regulator-main-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "12V";
 		regulator-min-microvolt = <12000000>;
@@ -76,7 +76,7 @@
 		regulator-always-on;
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "5V";
 		regulator-min-microvolt = <5000000>;
@@ -87,7 +87,7 @@
 		enable-active-high;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -96,7 +96,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -125,7 +125,7 @@
 		regulator-always-on;
 	};
 
-	usb_pwr_en: regulator-usb_pwr_en {
+	usb_pwr_en: regulator-usb-pwr-en {
 		compatible = "regulator-fixed";
 		regulator-name = "USB_PWR_EN";
 		regulator-min-microvolt = <5000000>;
@@ -137,7 +137,7 @@
 		enable-active-high;
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -146,7 +146,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -174,6 +174,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -181,7 +185,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
@@ -247,28 +250,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &ext_mdio {
@@ -283,7 +282,7 @@
 
 		interrupt-parent = <&gpio_intc>;
 		/* MAC_INTR on GPIOZ_14 */
-		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -389,8 +388,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
new file mode 100644
index 000000000000..5daadfb170b4
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/g12a-clkc.h>
+#include "meson-sm1.dtsi"
+#include "meson-libretech-cottonwood.dtsi"
+
+/ {
+	compatible = "libretech,aml-s905d3-cc", "amlogic,sm1";
+	model = "Libre Computer AML-S905D3-CC Solitude";
+
+	sound {
+		model = "LC-SOLITUDE";
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
+				"TDM_C Playback", "TDMOUT_C OUT",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_B IN 0", "TDM_A Capture",
+				"TDMIN_C IN 0", "TDM_A Capture",
+				"TDMIN_A IN 13", "TDM_A Loopback",
+				"TDMIN_B IN 13", "TDM_A Loopback",
+				"TDMIN_C IN 13", "TDM_A Loopback",
+				"TDMIN_A IN 1", "TDM_B Capture",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_C IN 1", "TDM_B Capture",
+				"TDMIN_A IN 14", "TDM_B Loopback",
+				"TDMIN_B IN 14", "TDM_B Loopback",
+				"TDMIN_C IN 14", "TDM_B Loopback",
+				"TDMIN_A IN 2", "TDM_C Capture",
+				"TDMIN_B IN 2", "TDM_C Capture",
+				"TDMIN_C IN 2", "TDM_C Capture",
+				"TDMIN_A IN 15", "TDM_C Loopback",
+				"TDMIN_B IN 15", "TDM_C Loopback",
+				"TDMIN_C IN 15", "TDM_C Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"Lineout", "ACODEC LOLP",
+				"Lineout", "ACODEC LORP";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 603337ca5608..024d2eb8e6ee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -32,7 +32,6 @@
 		compatible = "dmic-codec";
 		num-channels = <2>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
@@ -53,7 +52,7 @@
 			linux,code = <BTN_0>;
 			gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
 			interrupt-parent = <&gpio_intc>;
-			interrupts = <34 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <IRQID_GPIOH_6 IRQ_TYPE_EDGE_BOTH>;
 		};
 
 		key-2 {
@@ -61,7 +60,7 @@
 			linux,code = <BTN_1>;
 			gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
 			interrupt-parent = <&gpio_intc>;
-			interrupts = <35 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <IRQID_GPIOH_7 IRQ_TYPE_EDGE_BOTH>;
 		};
 
 		key-3 {
@@ -69,7 +68,7 @@
 			linux,code = <BTN_2>;
 			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
 			interrupt-parent = <&gpio_intc>;
-			interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <IRQID_GPIOAO_2 IRQ_TYPE_EDGE_BOTH>;
 		};
 
 		key-mic-mute {
@@ -78,7 +77,7 @@
 			linux,input-type = <EV_SW>;
 			gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>;
 			interrupt-parent = <&gpio_intc>;
-			interrupts = <99 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <IRQID_GPIOE_2 IRQ_TYPE_EDGE_BOTH>;
 		};
 
 		key-power {
@@ -86,7 +85,7 @@
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
 			interrupt-parent = <&gpio_intc>;
-			interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>;
 		};
 	};
 
@@ -128,7 +127,7 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -137,7 +136,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -145,7 +144,7 @@
 		regulator-always-on;
 	};
 
-	emmc_1v8: regulator-emmc_1v8 {
+	emmc_1v8: regulator-emmc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "EMMC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -154,7 +153,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -164,14 +163,13 @@
 	};
 
 	/* Used by Tuner, RGB Led & IR Emitter LED array */
-	vddao_3v3_t: regulator-vddao_3v3_t {
+	vddao_3v3_t: regulator-vddao-3v3-t {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3_T";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vddao_3v3>;
 		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
-		enable-active-low;
 		regulator-always-on;
 	};
 
@@ -194,7 +192,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao1v8: regulator-vddio_ao1v8 {
+	vddio_ao1v8: regulator-vddio-ao1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO1V8";
 		regulator-min-microvolt = <1800000>;
@@ -241,6 +239,10 @@
 				"TODDR_B IN 1", "TDMIN_B OUT",
 				"TODDR_C IN 1", "TDMIN_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -248,7 +250,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
@@ -358,28 +359,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &ethmac {
@@ -434,15 +431,11 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -450,8 +443,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &saradc {
@@ -584,7 +575,7 @@
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		interrupt-parent = <&gpio_intc>;
-		interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <IRQID_GPIOX_18 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "host-wakeup";
 		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		max-speed = <2000000>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
index 7e1a74046ba5..e4a3a2a8ad06 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
@@ -22,6 +22,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -29,7 +33,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
@@ -100,7 +103,7 @@
 
 		interrupt-parent = <&gpio_intc>;
 		/* MAC_INTR on GPIOZ_14 */
-		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
index cd93d798f2a3..fff92e0d6dd5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
@@ -22,6 +22,10 @@
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -29,7 +33,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 80737731af3f..e5db8ce94062 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -17,10 +17,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_A";
-		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -28,10 +28,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_B";
-		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -39,10 +39,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_C";
-		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -55,6 +55,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -64,6 +70,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -73,6 +85,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -82,12 +100,23 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
 
 		l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>; /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <256>;
 		};
 	};
 
@@ -98,6 +127,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <770000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
@@ -273,8 +303,7 @@
 		};
 
 		tdmin_a: audio-controller@300 {
-			compatible = "amlogic,sm1-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,sm1-tdmin";
 			reg = <0x0 0x300 0x0 0x40>;
 			sound-name-prefix = "TDMIN_A";
 			resets = <&clkc_audio AUD_RESET_TDMIN_A>;
@@ -289,8 +318,7 @@
 		};
 
 		tdmin_b: audio-controller@340 {
-			compatible = "amlogic,sm1-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,sm1-tdmin";
 			reg = <0x0 0x340 0x0 0x40>;
 			sound-name-prefix = "TDMIN_B";
 			resets = <&clkc_audio AUD_RESET_TDMIN_B>;
@@ -305,8 +333,7 @@
 		};
 
 		tdmin_c: audio-controller@380 {
-			compatible = "amlogic,sm1-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,sm1-tdmin";
 			reg = <0x0 0x380 0x0 0x40>;
 			sound-name-prefix = "TDMIN_C";
 			resets = <&clkc_audio AUD_RESET_TDMIN_C>;
@@ -321,8 +348,7 @@
 		};
 
 		tdmin_lb: audio-controller@3c0 {
-			compatible = "amlogic,sm1-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,sm1-tdmin";
 			reg = <0x0 0x3c0 0x0 0x40>;
 			sound-name-prefix = "TDMIN_LB";
 			resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
@@ -337,7 +363,7 @@
 		};
 
 		spdifin: audio-controller@400 {
-			compatible = "amlogic,g12a-spdifin",
+			compatible = "amlogic,sm1-spdifin",
 				     "amlogic,axg-spdifin";
 			reg = <0x0 0x400 0x0 0x30>;
 			#sound-dai-cells = <0>;
@@ -351,7 +377,7 @@
 		};
 
 		spdifout_a: audio-controller@480 {
-			compatible = "amlogic,g12a-spdifout",
+			compatible = "amlogic,sm1-spdifout",
 				     "amlogic,axg-spdifout";
 			reg = <0x0 0x480 0x0 0x50>;
 			#sound-dai-cells = <0>;
@@ -516,10 +542,18 @@
 		     "amlogic,meson-gpio-intc";
 };
 
+&hdmi_tx {
+	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
+};
+
 &pcie {
 	power-domains = <&pwrc PWRC_SM1_PCIE_ID>;
 };
 
+&pmu {
+	compatible = "amlogic,sm1-ddr-pmu";
+};
+
 &pwrc {
 	compatible = "amlogic,meson-sm1-pwrc";
 };
@@ -543,3 +577,7 @@
 &usb {
 	power-domains = <&pwrc PWRC_SM1_USB_ID>;
 };
+
+&npu {
+	power-domains = <&pwrc PWRC_SM1_NNA_ID>;
+};
diff --git a/arch/arm64/boot/dts/apm/apm-merlin.dts b/arch/arm64/boot/dts/apm/apm-merlin.dts
index 049e7a5edca7..b1160780a2a6 100644
--- a/arch/arm64/boot/dts/apm/apm-merlin.dts
+++ b/arch/arm64/boot/dts/apm/apm-merlin.dts
@@ -15,7 +15,7 @@
 
 	chosen { };
 
-	memory {
+	memory@100000000 {
 		device_type = "memory";
 		reg = < 0x1 0x00000000 0x0 0x80000000 >;
 	};
@@ -32,7 +32,7 @@
 	};
 
 	poweroff_mbox: poweroff_mbox@10548000 {
-		compatible = "syscon";
+		compatible = "apm,merlin-poweroff-mailbox", "syscon";
 		reg = <0x0 0x10548000 0x0 0x30>;
 	};
 
@@ -45,38 +45,38 @@
 };
 
 &serial0 {
-	status = "ok";
+	status = "okay";
 };
 
 &sata1 {
-	status = "ok";
+	status = "okay";
 };
 
 &sata2 {
-	status = "ok";
+	status = "okay";
 };
 
 &sata3 {
-	status = "ok";
+	status = "okay";
 };
 
 &sgenet0 {
-	status = "ok";
+	status = "okay";
 };
 
 &xgenet1 {
-	status = "ok";
+	status = "okay";
 };
 
 &mmc0 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c4 {
 	rtc68: rtc@68 {
 		compatible = "dallas,ds1337";
 		reg = <0x68>;
-		status = "ok";
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts
index efac50aeca64..2ef658796746 100644
--- a/arch/arm64/boot/dts/apm/apm-mustang.dts
+++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
@@ -15,7 +15,7 @@
 
 	chosen { };
 
-	memory {
+	memory@100000000 {
 		device_type = "memory";
 		reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
 	};
@@ -32,7 +32,7 @@
 	};
 
 	poweroff_mbox: poweroff_mbox@10548000 {
-		compatible = "syscon";
+		compatible = "apm,mustang-poweroff-mailbox", "syscon";
 		reg = <0x0 0x10548000 0x0 0x30>;
 	};
 
@@ -45,36 +45,36 @@
 };
 
 &pcie0clk {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie0 {
-	status = "ok";
+	status = "okay";
 };
 
 &serial0 {
-	status = "ok";
+	status = "okay";
 };
 
 &menet {
-	status = "ok";
+	status = "okay";
 };
 
 &sgenet0 {
-	status = "ok";
+	status = "okay";
 };
 
 &sgenet1 {
-	status = "ok";
+	status = "okay";
 };
 
 &xgenet {
-	status = "ok";
+	status = "okay";
 	rxlos-gpios = <&sbgpio 12 1>;
 };
 
 &mmc0 {
-	status = "ok";
+	status = "okay";
 };
 
 &mdio {
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index a8526f8157ec..5bbedb0a7107 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -22,7 +22,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_0>;
-			#clock-cells = <1>;
 			clocks = <&pmd0clk 0>;
 		};
 		cpu@1 {
@@ -32,7 +31,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_0>;
-			#clock-cells = <1>;
 			clocks = <&pmd0clk 0>;
 		};
 		cpu@100 {
@@ -42,7 +40,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_1>;
-			#clock-cells = <1>;
 			clocks = <&pmd1clk 0>;
 		};
 		cpu@101 {
@@ -52,7 +49,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_1>;
-			#clock-cells = <1>;
 			clocks = <&pmd1clk 0>;
 		};
 		cpu@200 {
@@ -62,7 +58,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_2>;
-			#clock-cells = <1>;
 			clocks = <&pmd2clk 0>;
 		};
 		cpu@201 {
@@ -72,7 +67,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_2>;
-			#clock-cells = <1>;
 			clocks = <&pmd2clk 0>;
 		};
 		cpu@300 {
@@ -82,7 +76,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_3>;
-			#clock-cells = <1>;
 			clocks = <&pmd3clk 0>;
 		};
 		cpu@301 {
@@ -92,20 +85,27 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_3>;
-			#clock-cells = <1>;
 			clocks = <&pmd3clk 0>;
 		};
 		xgene_L2_0: l2-cache-0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 		xgene_L2_1: l2-cache-1 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 		xgene_L2_2: l2-cache-2 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 		xgene_L2_3: l2-cache-3 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -203,6 +203,13 @@
 		};
 	};
 
+	refclk: clock-100000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "refclk";
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <1 12 0xff04>;
@@ -217,6 +224,16 @@
 		clock-frequency = <50000000>;
 	};
 
+	i2cslimpro {
+		compatible = "apm,xgene-slimpro-i2c";
+		mboxes = <&mailbox 0>;
+	};
+
+	hwmonslimpro {
+		compatible = "apm,xgene-slimpro-hwmon";
+		mboxes = <&mailbox 7>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -228,17 +245,10 @@
 			#size-cells = <2>;
 			ranges;
 
-			refclk: refclk {
-				compatible = "fixed-clock";
-				#clock-cells = <1>;
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk";
-			};
-
 			pmdpll: pmdpll@170000f0 {
 				compatible = "apm,xgene-pcppll-v2-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				reg = <0x0 0x170000f0 0x0 0x10>;
 				clock-output-names = "pmdpll";
 			};
@@ -278,7 +288,7 @@
 			socpll: socpll@17000120 {
 				compatible = "apm,xgene-socpll-v2-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				reg = <0x0 0x17000120 0x0 0x1000>;
 				clock-output-names = "socpll";
 			};
@@ -577,18 +587,7 @@
 					0x0 0x7 0x4>;
 		};
 
-		i2cslimpro {
-			compatible = "apm,xgene-slimpro-i2c";
-			mboxes = <&mailbox 0>;
-		};
-
-		hwmonslimpro {
-			compatible = "apm,xgene-slimpro-hwmon";
-			mboxes = <&mailbox 7>;
-		};
-
 		serial0: serial@10600000 {
-			device_type = "serial";
 			compatible = "ns16550";
 			reg = <0 0x10600000 0x0 0x1000>;
 			reg-shift = <2>;
@@ -610,7 +609,7 @@
 		pcie0: pcie@1f2b0000 {
 			status = "disabled";
 			device_type = "pci";
-			compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
+			compatible = "apm,xgene-pcie";
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
@@ -636,7 +635,7 @@
 		pcie1: pcie@1f2c0000 {
 			status = "disabled";
 			device_type = "pci";
-			compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
+			compatible = "apm,xgene-pcie";
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
@@ -721,7 +720,7 @@
 			};
 		};
 
-		sbgpio: gpio@17001000{
+		sbgpio: gpio@17001000 {
 			compatible = "apm,xgene-gpio-sb";
 			reg = <0x0 0x17001000 0x0 0x400>;
 			#gpio-cells = <2>;
@@ -802,7 +801,6 @@
 			interrupts = <0 0x45 0x4>;
 			#clock-cells = <1>;
 			clocks = <&sbapbclk 0>;
-			bus_num = <1>;
 		};
 
 		i2c4: i2c@10640000 {
@@ -812,7 +810,6 @@
 			reg = <0x0 0x10640000 0x0 0x1000>;
 			interrupts = <0 0x3a 0x4>;
 			clocks = <&i2c4clk 0>;
-			bus_num = <4>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index f56d687f772d..4ca0ead120c1 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -81,20 +81,29 @@
 		};
 		xgene_L2_0: l2-cache-0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 		xgene_L2_1: l2-cache-1 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 		xgene_L2_2: l2-cache-2 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 		xgene_L2_3: l2-cache-3 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
 	gic: interrupt-controller@78010000 {
 		compatible = "arm,cortex-a15-gic";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x78010000 0x0 0x1000>,	/* GIC Dist */
@@ -104,6 +113,13 @@
 		interrupts = <1 9 0xf04>;	/* GIC Maintenence IRQ */
 	};
 
+	refclk: clock-100000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "refclk";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <1 0 0xff08>,	/* Secure Phys IRQ */
@@ -114,10 +130,20 @@
 	};
 
 	pmu {
-		compatible = "apm,potenza-pmu", "arm,armv8-pmuv3";
+		compatible = "apm,potenza-pmu";
 		interrupts = <1 12 0xff04>;
 	};
 
+	i2cslimpro {
+		compatible = "apm,xgene-slimpro-i2c";
+		mboxes = <&mailbox 0>;
+	};
+
+	hwmonslimpro {
+		compatible = "apm,xgene-slimpro-hwmon";
+		mboxes = <&mailbox 7>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -129,38 +155,29 @@
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
-			refclk: refclk {
-				compatible = "fixed-clock";
-				#clock-cells = <1>;
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk";
-			};
 
 			pcppll: pcppll@17000100 {
 				compatible = "apm,xgene-pcppll-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				clock-names = "pcppll";
 				reg = <0x0 0x17000100 0x0 0x1000>;
 				clock-output-names = "pcppll";
-				type = <0>;
 			};
 
 			socpll: socpll@17000120 {
 				compatible = "apm,xgene-socpll-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				clock-names = "socpll";
 				reg = <0x0 0x17000120 0x0 0x1000>;
 				clock-output-names = "socpll";
-				type = <1>;
 			};
 
 			socplldiv2: socplldiv2  {
 				compatible = "fixed-factor-clock";
-				#clock-cells = <1>;
+				#clock-cells = <0>;
 				clocks = <&socpll 0>;
-				clock-names = "socplldiv2";
 				clock-mult = <1>;
 				clock-div = <2>;
 				clock-output-names = "socplldiv2";
@@ -169,7 +186,7 @@
 			ahbclk: ahbclk@17000000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x17000000 0x0 0x2000>;
 				reg-names = "div-reg";
 				divider-offset = <0x164>;
@@ -181,7 +198,7 @@
 			sdioclk: sdioclk@1f2ac000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2ac000 0x0 0x1000
 					0x0 0x17000000 0x0 0x2000>;
 				reg-names = "csr-reg", "div-reg";
@@ -198,7 +215,7 @@
 			ethclk: ethclk {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				clock-names = "ethclk";
 				reg = <0x0 0x17000000 0x0 0x1000>;
 				reg-names = "div-reg";
@@ -220,7 +237,7 @@
 			sge0clk: sge0clk@1f21c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f21c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				csr-mask = <0xa>;
@@ -231,7 +248,7 @@
 			xge0clk: xge0clk@1f61c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f61c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				csr-mask = <0x3>;
@@ -242,7 +259,7 @@
 				compatible = "apm,xgene-device-clock";
 				status = "disabled";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f62c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				csr-mask = <0x3>;
@@ -252,7 +269,7 @@
 			sataphy1clk: sataphy1clk@1f21c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f21c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sataphy1clk";
@@ -266,11 +283,11 @@
 			sataphy2clk: sataphy1clk@1f22c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f22c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sataphy2clk";
-				status = "ok";
+				status = "okay";
 				csr-offset = <0x4>;
 				csr-mask = <0x3a>;
 				enable-offset = <0x0>;
@@ -280,11 +297,11 @@
 			sataphy3clk: sataphy1clk@1f23c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f23c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sataphy3clk";
-				status = "ok";
+				status = "okay";
 				csr-offset = <0x4>;
 				csr-mask = <0x3a>;
 				enable-offset = <0x0>;
@@ -294,7 +311,7 @@
 			sata01clk: sata01clk@1f21c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f21c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sata01clk";
@@ -307,7 +324,7 @@
 			sata23clk: sata23clk@1f22c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f22c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sata23clk";
@@ -320,7 +337,7 @@
 			sata45clk: sata45clk@1f23c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f23c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sata45clk";
@@ -333,7 +350,7 @@
 			rtcclk: rtcclk@17000000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x17000000 0x0 0x2000>;
 				reg-names = "csr-reg";
 				csr-offset = <0xc>;
@@ -346,7 +363,7 @@
 			rngpkaclk: rngpkaclk@17000000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x17000000 0x0 0x2000>;
 				reg-names = "csr-reg";
 				csr-offset = <0xc>;
@@ -360,7 +377,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2bc000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie0clk";
@@ -370,7 +387,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2cc000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie1clk";
@@ -380,7 +397,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2dc000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie2clk";
@@ -390,7 +407,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f50c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie3clk";
@@ -400,7 +417,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f51c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie4clk";
@@ -409,7 +426,7 @@
 			dmaclk: dmaclk@1f27c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f27c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "dmaclk";
@@ -751,19 +768,8 @@
 					<0x0 0x7 0x4>;
 		};
 
-		i2cslimpro {
-			compatible = "apm,xgene-slimpro-i2c";
-			mboxes = <&mailbox 0>;
-		};
-
-		hwmonslimpro {
-			compatible = "apm,xgene-slimpro-hwmon";
-			mboxes = <&mailbox 7>;
-		};
-
 		serial0: serial@1c020000 {
 			status = "disabled";
-			device_type = "serial";
 			compatible = "ns16550a";
 			reg = <0 0x1c020000 0x0 0x1000>;
 			reg-shift = <2>;
@@ -774,7 +780,6 @@
 
 		serial1: serial@1c021000 {
 			status = "disabled";
-			device_type = "serial";
 			compatible = "ns16550a";
 			reg = <0 0x1c021000 0x0 0x1000>;
 			reg-shift = <2>;
@@ -785,7 +790,6 @@
 
 		serial2: serial@1c022000 {
 			status = "disabled";
-			device_type = "serial";
 			compatible = "ns16550a";
 			reg = <0 0x1c022000 0x0 0x1000>;
 			reg-shift = <2>;
@@ -796,7 +800,6 @@
 
 		serial3: serial@1c023000 {
 			status = "disabled";
-			device_type = "serial";
 			compatible = "ns16550a";
 			reg = <0 0x1c023000 0x0 0x1000>;
 			reg-shift = <2>;
@@ -844,9 +847,7 @@
 			compatible = "snps,designware-i2c";
 			reg = <0x0 0x10512000 0x0 0x1000>;
 			interrupts = <0 0x44 0x4>;
-			#clock-cells = <1>;
 			clocks = <&ahbclk 0>;
-			bus_num = <0>;
 		};
 
 		phy1: phy@1f21a000 {
@@ -864,7 +865,7 @@
 			reg = <0x0 0x1f22a000 0x0 0x100>;
 			#phy-cells = <1>;
 			clocks = <&sataphy2clk 0>;
-			status = "ok";
+			status = "okay";
 			apm,tx-boost-gain = <30 30 30 30 30 30>;
 			apm,tx-eye-tuning = <1 10 10 2 10 10>;
 		};
@@ -874,7 +875,7 @@
 			reg = <0x0 0x1f23a000 0x0 0x100>;
 			#phy-cells = <1>;
 			clocks = <&sataphy3clk 0>;
-			status = "ok";
+			status = "okay";
 			apm,tx-boost-gain = <31 31 31 31 31 31>;
 			apm,tx-eye-tuning = <2 10 10 2 10 10>;
 		};
@@ -903,7 +904,7 @@
 			      <0x0 0x1f227000 0x0 0x1000>;
 			interrupts = <0x0 0x87 0x4>;
 			dma-coherent;
-			status = "ok";
+			status = "okay";
 			clocks = <&sata23clk 0>;
 			phys = <&phy2 0>;
 			phy-names = "sata-phy";
@@ -917,7 +918,7 @@
 			      <0x0 0x1f23e000 0x0 0x1000>;
 			interrupts = <0x0 0x88 0x4>;
 			dma-coherent;
-			status = "ok";
+			status = "okay";
 			clocks = <&sata45clk 0>;
 			phys = <&phy3 0>;
 			phy-names = "sata-phy";
@@ -942,7 +943,7 @@
 			dr_mode = "host";
 		};
 
-		sbgpio: gpio@17001000{
+		sbgpio: gpio@17001000 {
 			compatible = "apm,xgene-gpio-sb";
 			reg = <0x0 0x17001000 0x0 0x400>;
 			#gpio-cells = <2>;
@@ -992,7 +993,7 @@
 				compatible = "apm,xgene-mdio";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				menetphy: menetphy@3 {
+				menetphy: ethernet-phy@3 {
 					compatible = "ethernet-phy-id001c.c915";
 					reg = <0x3>;
 				};
diff --git a/arch/arm64/boot/dts/apple/Makefile b/arch/arm64/boot/dts/apple/Makefile
index c0510c25ca6a..4eebcd85c90f 100644
--- a/arch/arm64/boot/dts/apple/Makefile
+++ b/arch/arm64/boot/dts/apple/Makefile
@@ -1,6 +1,93 @@
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j71.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j73.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j85m.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j86m.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j87m.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-n53.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j72.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j85.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j86.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-j87.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s5l8960x-n51.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7000-j42d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7000-j96.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7000-j97.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7000-n102.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7000-n56.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7000-n61.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7001-j81.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7001-j82.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8000-j71s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8000-j72s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8000-n66.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8000-n69u.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8000-n71.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8003-j71t.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8003-j72t.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8003-n66m.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8003-n69.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8003-n71m.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8001-j127.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8001-j128.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8001-j98a.dtb
+dtb-$(CONFIG_ARCH_APPLE) += s8001-j99a.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-d101.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-d10.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-d111.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-d11.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-j171.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-j172.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-j71b.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-j72b.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8010-n112.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8011-j105a.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8011-j120.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8011-j121.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8011-j207.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8011-j208.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j132.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j137.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j140a.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j140k.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j152f.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j160.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j174.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j185.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j185f.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j213.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j215.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j223.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j230k.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j214k.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j680.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j780.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8015-d201.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8015-d20.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8015-d211.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8015-d21.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8015-d221.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8015-d22.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8103-j274.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8103-j293.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8103-j313.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8103-j456.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8103-j457.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6000-j314s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6001-j314c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6000-j316s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6001-j316c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6001-j375c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6002-j375d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6022-j180d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6020-j414s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6021-j414c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6020-j416s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6021-j416c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6020-j474s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6021-j475c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6022-j475d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8112-j413.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8112-j415.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8112-j473.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8112-j493.dtb
diff --git a/arch/arm64/boot/dts/apple/multi-die-cpp.h b/arch/arm64/boot/dts/apple/multi-die-cpp.h
new file mode 100644
index 000000000000..39e8953bf809
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/multi-die-cpp.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR MIT
+ *
+ * C preprocessor macros for t600x multi die support.
+ */
+
+#ifndef __DTS_APPLE_MULTI_DIE_CPP_H
+#define __DTS_APPLE_MULTI_DIE_CPP_H
+
+#ifndef __stringify
+#define __stringify_1(x...)     #x
+#define __stringify(x...)       __stringify_1(x)
+#endif
+
+#ifndef __concat
+#define __concat_1(x, y...)     x ## y
+#define __concat(x, y...)       __concat_1(x, y)
+#endif
+
+#define DIE_NODE(a) __concat(a, DIE)
+#define DIE_LABEL(a) __stringify(__concat(a, DIE))
+
+#endif /* !__DTS_APPLE_MULTI_DIE_CPP_H */
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-5s.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-5s.dtsi
new file mode 100644
index 000000000000..8868df1538d6
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-5s.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 5s common device tree
+ * Based on A7 (APL0698), up to 1.3GHz
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s5l8960x.dtsi"
+#include "s5l8960x-common.dtsi"
+#include "s5l8960x-opp.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "handset";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl 16 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&dwi_bl {
+	status = "okay";
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_mipi_dsi>;
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-air1.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-air1.dtsi
new file mode 100644
index 000000000000..dd57eb1d34c0
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-air1.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air  common device tree
+ * Based on A7 (APL5698), up to 1.4GHz
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s5l8960x.dtsi"
+#include "s5l8960x-common.dtsi"
+#include "s5l8965x-opp.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl 110 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_dp>;
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-common.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-common.dtsi
new file mode 100644
index 000000000000..243480ca2356
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-common.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 5s, iPad mini 2/3, iPad Air
+ *
+ * This file contains parts common to all Apple A7 devices.
+ *
+ * target-type: J71, J72, J73, J85, J85m, J86, J86m, J87, J87m, N51, N53
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j71.dts b/arch/arm64/boot/dts/apple/s5l8960x-j71.dts
new file mode 100644
index 000000000000..e13036dacb45
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j71.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air (Wi-Fi), J71, iPad4,1 (A1474)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-air1.dtsi"
+
+/ {
+	compatible = "apple,j71", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad Air (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j72.dts b/arch/arm64/boot/dts/apple/s5l8960x-j72.dts
new file mode 100644
index 000000000000..afb71b8885c6
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j72.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air (Cellular), J72, iPad4,2 (A1475)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-air1.dtsi"
+
+/ {
+	compatible = "apple,j72", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad Air (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j73.dts b/arch/arm64/boot/dts/apple/s5l8960x-j73.dts
new file mode 100644
index 000000000000..c871962df529
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j73.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air (Cellular, China), J73, iPad4,2 (A1476)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-air1.dtsi"
+
+/ {
+	compatible = "apple,j73", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad Air (Cellular, China)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j85.dts b/arch/arm64/boot/dts/apple/s5l8960x-j85.dts
new file mode 100644
index 000000000000..aefb7b36d7aa
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j85.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 2 (Wi-Fi), J85, iPad4,4 (A1489)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-mini2.dtsi"
+
+/ {
+	compatible = "apple,j85", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad mini 2 (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j85m.dts b/arch/arm64/boot/dts/apple/s5l8960x-j85m.dts
new file mode 100644
index 000000000000..ec2bcaa6d1d5
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j85m.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 3 (Wi-Fi), J85m, iPad4,7 (A1599)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-mini3.dtsi"
+
+/ {
+	compatible = "apple,j85m", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad mini 3 (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j86.dts b/arch/arm64/boot/dts/apple/s5l8960x-j86.dts
new file mode 100644
index 000000000000..470f2f825e70
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j86.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 2 (Cellular), J86, iPad4,5 (A1490)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-mini2.dtsi"
+
+/ {
+	compatible = "apple,j86", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad mini 2 (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j86m.dts b/arch/arm64/boot/dts/apple/s5l8960x-j86m.dts
new file mode 100644
index 000000000000..90311d98aaad
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j86m.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 3 (Cellular), J86m, iPad4,8 (A1600)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-mini3.dtsi"
+
+/ {
+	compatible = "apple,j86m", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad mini 3 (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j87.dts b/arch/arm64/boot/dts/apple/s5l8960x-j87.dts
new file mode 100644
index 000000000000..3580fd8e3831
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j87.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 2 (Cellular, China), J87, iPad4,6 (A1491)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-mini2.dtsi"
+
+/ {
+	compatible = "apple,j87", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad mini 2 (Cellular, China)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-j87m.dts b/arch/arm64/boot/dts/apple/s5l8960x-j87m.dts
new file mode 100644
index 000000000000..fa0da4fa6727
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-j87m.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 3 (Cellular, China), J87m, iPad4,9 (A1601)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-mini3.dtsi"
+
+/ {
+	compatible = "apple,j87m", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPad mini 3 (Cellular, China)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-mini2.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-mini2.dtsi
new file mode 100644
index 000000000000..f3696d22e71c
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-mini2.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 2 common device tree
+ * Based on A7 (APL0698), up to 1.3GHz
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s5l8960x.dtsi"
+#include "s5l8960x-common.dtsi"
+#include "s5l8960x-opp.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_dp>;
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-mini3.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-mini3.dtsi
new file mode 100644
index 000000000000..4e397b3d7d7a
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-mini3.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 3 common device tree
+ * Based on A7 (APL0698), up to 1.3GHz
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/*
+ * The Mini 3 seems to be only an iteration over the Mini 2 with some
+ * small changes, like the introduction of Touch ID, hence there is little
+ * to no differentiation between these 2 for now.
+ */
+#include "s5l8960x-mini2.dtsi"
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-n51.dts b/arch/arm64/boot/dts/apple/s5l8960x-n51.dts
new file mode 100644
index 000000000000..cd52f814fbf2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-n51.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 5s (GSM), N51, iPhone6,1 (A1453/A1533)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-5s.dtsi"
+
+/ {
+	compatible = "apple,n51", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPhone 5s (GSM)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-n53.dts b/arch/arm64/boot/dts/apple/s5l8960x-n53.dts
new file mode 100644
index 000000000000..4795798a4444
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-n53.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 5s (LTE), N53, iPhone6,2 (A1457/A1518/A1528/A1530)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s5l8960x-5s.dtsi"
+
+/ {
+	compatible = "apple,n53", "apple,s5l8960x", "apple,arm-platform";
+	model = "Apple iPhone 5s (LTE)";
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-opp.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-opp.dtsi
new file mode 100644
index 000000000000..e4d568c4a119
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-opp.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Operating points for Apple S5L8960X "A7" SoC, Up to 1296 MHz
+ *
+ * target-type: N51, N53, J85, J86. J87, J85m, J86m, J87m
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	cyclone_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <15500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <43000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <3>;
+			clock-latency-ns = <26000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <840000000>;
+			opp-level = <4>;
+			clock-latency-ns = <30000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-level = <5>;
+			clock-latency-ns = <39500>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-level = <6>;
+			clock-latency-ns = <45500>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-pmgr.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-pmgr.dtsi
new file mode 100644
index 000000000000..da265f484307
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-pmgr.dtsi
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple S5L8960X "A7" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@20000 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@20008 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_secuart0: power-controller@200f0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "secuart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_secuart1: power-controller@200f8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "secuart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_cpm: power-controller@20010 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_lio: power-controller@20018 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "lio";
+		apple,always-on; /* Core device */
+	};
+
+	ps_iomux: power-controller@20020 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "iomux";
+		apple,always-on; /* Core device */
+	};
+
+	ps_aic: power-controller@20028 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_debug: power-controller@20030 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_dwi: power-controller@20038 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20038 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@20040 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_mca0: power-controller@20048 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20048 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@20050 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@20058 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20058 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@20060 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20060 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@20068 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20068 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@20070 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20070 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@20078 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20078 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@20080 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20080 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@20088 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20088 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@20090 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20090 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@20098 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20098 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@200a0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@200a8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@200b0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@200b8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@200c0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@200c8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@200d0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@200d8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@200e0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@200e8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio_p: power-controller@20110 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+	};
+
+	ps_usb: power-controller@20158 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@20160 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@20170 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@20180 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_disp_busmux: power-controller@201a8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp_busmux";
+	};
+
+	ps_media: power-controller@201d8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp: power-controller@201d0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp";
+	};
+
+	ps_msr: power-controller@201e0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@201e8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0: power-controller@201b0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_aes0: power-controller@20100 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@20108 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsic0_phy: power-controller@20118 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_hsic1_phy: power-controller@20120 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic1_phy";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_hsic2_phy: power-controller@20128 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic2_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_ispsens0: power-controller@20130 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@20138 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_mcc: power-controller@20140 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Core device */
+	};
+
+	ps_mcu: power-controller@20148 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcu";
+		apple,always-on; /* Core device */
+	};
+
+	ps_amp: power-controller@20150 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "amp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb2host0_ohci: power-controller@20168 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usb2host1_ohci: power-controller@20178 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1_ohci";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_usbotg: power-controller@20188 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@20190 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@20198 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_cp: power-controller@201a0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_mipi_dsi: power-controller@201b8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_dp: power-controller@201c0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0>;
+	};
+
+	ps_disp1: power-controller@201c8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_vdec: power-controller@201f0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec";
+		power-domains = <&ps_media>;
+	};
+
+	ps_venc: power-controller@201f8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc";
+		power-domains = <&ps_media>;
+	};
+
+	ps_ans: power-controller@20200 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans";
+	};
+
+	ps_ans_dll: power-controller@20208 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans_dll";
+		power-domains = <&ps_ans>;
+	};
+
+	ps_gfx: power-controller@20218 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@20268 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		power-domains = <&ps_secuart1>, <&ps_secuart0>;
+		apple,always-on; /* Locked on */
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x.dtsi b/arch/arm64/boot/dts/apple/s5l8960x.dtsi
new file mode 100644
index 000000000000..462ffdd348fc
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple S5L8960X "A7" SoC
+ *
+ * Other Names: H6, "Alcatraz"
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ * Based on Asahi Linux's M1 (t8103.dtsi) and Corellium's A10 efforts.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,cyclone";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&cyclone_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,cyclone";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&cyclone_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,s5l8960x-cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a0a0000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0a0000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 140 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 154 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 155 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 156 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 157 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,s5l8960x-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x24000>;
+		};
+
+		wdt: watchdog@20e027000 {
+			compatible = "apple,s5l8960x-wdt", "apple,wdt";
+			reg = <0x2 0x0e027000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,s5l8960x-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		dwi_bl: backlight@20e200010 {
+			compatible = "apple,s5l8960x-dwi-bl", "apple,dwi-bl";
+			reg = <0x2 0x0e200010 0x0 0x8>;
+			power-domains = <&ps_dwi>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@20e300000 {
+			compatible = "apple,s5l8960x-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0e300000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 200>;
+			apple,npins = <200>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 114 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(81, 1)>,
+					 <APPLE_PINMUX(80, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(83, 1)>,
+					 <APPLE_PINMUX(82, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(101, 1)>,
+					 <APPLE_PINMUX(100, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(172, 1)>,
+					 <APPLE_PINMUX(171, 1)>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A7 doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "s5l8960x-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/s5l8965x-opp.dtsi b/arch/arm64/boot/dts/apple/s5l8965x-opp.dtsi
new file mode 100644
index 000000000000..d34dae74a90c
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8965x-opp.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Operating points for Apple S5L8965X "A7" Rev A SoC, Up to 1392 MHz
+ *
+ * target-type: J71, J72, J73
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	cyclone_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <10000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <2>;
+			clock-latency-ns = <49000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <840000000>;
+			opp-level = <3>;
+			clock-latency-ns = <30000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-level = <4>;
+			clock-latency-ns = <39500>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-level = <5>;
+			clock-latency-ns = <45500>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1392000000>;
+			opp-level = <6>;
+			clock-latency-ns = <46500>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s800-0-3-common.dtsi b/arch/arm64/boot/dts/apple/s800-0-3-common.dtsi
new file mode 100644
index 000000000000..cb42c5f2c1b6
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800-0-3-common.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6s, iPhone 6s Plus, iPad 5, iPhone SE
+ *
+ * This file contains parts common to all Apple A9 devices.
+ *
+ * target-type: J71s, J72s, N66, N69u, N71, J71t, J72t, N66m, N69, N71m
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&dwi_bl {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/s800-0-3-pmgr.dtsi b/arch/arm64/boot/dts/apple/s800-0-3-pmgr.dtsi
new file mode 100644
index 000000000000..196b8e745a95
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800-0-3-pmgr.dtsi
@@ -0,0 +1,757 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple S8000/3 "A9" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80150 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80158 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@80110 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@80118 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms: power-controller@80120 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pcie_ref: power-controller@80148 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_mca0: power-controller@80168 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80170 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80178 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80180 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80188 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@80190 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@80198 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@801a0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801a8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801b0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801b8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801c0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801c8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801d0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@801d8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@801e0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@801e8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@801f0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@801f8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80160 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsic0_phy: power-controller@80128 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_hsic1_phy: power-controller@80130 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic1_phy";
+		power-domains = <&ps_usb2host2>;
+	};
+
+	ps_isp_sens0: power-controller@80138 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens0";
+	};
+
+	ps_isp_sens1: power-controller@80140 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens1";
+	};
+
+	ps_usb: power-controller@80250 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@80258 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@80260 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@80270 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host2: power-controller@80280 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host2";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_rtmux: power-controller@802a8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rtmux";
+	};
+
+	ps_media: power-controller@802d0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp: power-controller@802c8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_msr: power-controller@802e0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@802d8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0: power-controller@802b0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_pmp: power-controller@802e8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@802f0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_uart5: power-controller@80200 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@80208 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@80210 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@80218 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_aes0: power-controller@80220 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80228 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80230 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@80238 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@80240 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@80248 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_usb2host0_ohci: power-controller@80268 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usb2host1_ohci: power-controller@80278 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1_ohci";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_usb2host2_ohci: power-controller@80288 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host2_ohci";
+		power-domains = <&ps_usb2host2>;
+	};
+
+	ps_usbotg: power-controller@80290 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@80298 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802a0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_mipi_dsi: power-controller@802b8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_dp: power-controller@802c0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0>;
+	};
+
+	ps_vdec: power-controller@802f8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec";
+		power-domains = <&ps_media>;
+	};
+
+	ps_venc: power-controller@80308 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie: power-controller@80310 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_pcie_aux: power-controller@80318 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_pcie_link0: power-controller@80320 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link0";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link1: power-controller@80328 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link1";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link2: power-controller@80330 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link2";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link3: power-controller@80338 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link3";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_gfx: power-controller@80340 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_venc_pipe: power-controller@88000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me0: power-controller@88008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88010 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_aop: power-controller@80000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop";
+		power-domains = <&ps_aop_busif &ps_aop_cpu &ps_aop_filter>;
+		apple,always-on; /* Always on processor */
+	};
+
+	ps_debug: power-controller@80008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_aop_gpio: power-controller@80010 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_gpio";
+		power-domains = <&ps_aop>;
+	};
+
+	ps_aop_cpu: power-controller@80040 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_cpu";
+	};
+
+	ps_aop_filter: power-controller@80048 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80048 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_filter";
+	};
+
+	ps_aop_busif: power-controller@80050 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_busif";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s800-0-3.dtsi b/arch/arm64/boot/dts/apple/s800-0-3.dtsi
new file mode 100644
index 000000000000..bb38662b7d2e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800-0-3.dtsi
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple S8000/S8003 "A9" SoC
+ *
+ * This file contains parts common to both variants of A9
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,twister";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			operating-points-v2 = <&twister_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,twister";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			operating-points-v2 = <&twister_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x300000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,s8000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a0c0000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0c0000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 192 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 206 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 207 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 208 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x8c000>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,s8000-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		dwi_bl: backlight@20e200080 {
+			compatible = "apple,s8000-dwi-bl", "apple,dwi-bl";
+			reg = <0x2 0x0e200080 0x0 0x8>;
+			power-domains = <&ps_dwi>;
+			status = "disabled";
+		};
+
+		pinctrl_ap: pinctrl@20f100000 {
+			compatible = "apple,s8000-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0f100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 208>;
+			apple,npins = <208>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(46, 1)>,
+					 <APPLE_PINMUX(45, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(115, 1)>,
+					 <APPLE_PINMUX(114, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(23, 1)>,
+					 <APPLE_PINMUX(22, 1)>;
+			};
+		};
+
+		pinctrl_aop: pinctrl@2100f0000 {
+			compatible = "apple,s8000-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x100f0000 0x0 0x100000>;
+			power-domains = <&ps_aop_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 42>;
+			apple,npins = <42>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 119 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@210200000 {
+			compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x10200000 0 0x84000>;
+		};
+
+		wdt: watchdog@2102b0000 {
+			compatible = "apple,s8000-wdt", "apple,wdt";
+			reg = <0x2 0x102b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A9 doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "s800-0-3-pmgr.dtsi"
+
+/*
+ * The A9 was made by two separate fabs on two different process
+ * nodes: Samsung made the S8000 (APL0898) on 14nm and TSMC made
+ * the S8003 (APL1022) on 16nm. There are some minor differences
+ * such as timing in cpufreq state transistions.
+ */
diff --git a/arch/arm64/boot/dts/apple/s8000-j71s.dts b/arch/arm64/boot/dts/apple/s8000-j71s.dts
new file mode 100644
index 000000000000..b5a2dfa1121e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8000-j71s.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 5 (Wi-Fi) (Samsung), J71s, iPad6,11 (A1822)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8000.dtsi"
+#include "s800x-ipad5.dtsi"
+
+/ {
+	compatible = "apple,j71s", "apple,s8000", "apple,arm-platform";
+	model = "Apple iPad 5 (Wi-Fi) (Samsung)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8000-j72s.dts b/arch/arm64/boot/dts/apple/s8000-j72s.dts
new file mode 100644
index 000000000000..8f3dea5adb09
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8000-j72s.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 5 (Cellular) (Samsung), J72s, iPad6,12 (A1823)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8000.dtsi"
+#include "s800x-ipad5.dtsi"
+
+/ {
+	compatible = "apple,j72s", "apple,s8000", "apple,arm-platform";
+	model = "Apple iPad 5 (Cellular) (Samsung)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8000-n66.dts b/arch/arm64/boot/dts/apple/s8000-n66.dts
new file mode 100644
index 000000000000..30b4b6630b60
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8000-n66.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6s Plus (Samsung), N66, iPhone8,2 (A1634/A1687/A1690/A1699)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8000.dtsi"
+#include "s800x-6s.dtsi"
+
+/ {
+	compatible = "apple,n66", "apple,s8000", "apple,arm-platform";
+	model = "Apple iPhone 6s Plus (Samsung)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8000-n69u.dts b/arch/arm64/boot/dts/apple/s8000-n69u.dts
new file mode 100644
index 000000000000..e63bc2e7f7c1
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8000-n69u.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone SE (Samsung), N69u, iPhone8,4 (A1662/A1723/A1724)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8000.dtsi"
+#include "s800x-se.dtsi"
+
+/ {
+	compatible = "apple,n69u", "apple,s8000", "apple,arm-platform";
+	model = "Apple iPhone SE (Samsung)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8000-n71.dts b/arch/arm64/boot/dts/apple/s8000-n71.dts
new file mode 100644
index 000000000000..f2964a1fc434
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8000-n71.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6s (Samsung), N71, iPhone8,1 (A1633/A1688/A1691/A1700)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8000.dtsi"
+#include "s800x-6s.dtsi"
+
+/ {
+	compatible = "apple,n71", "apple,s8000", "apple,arm-platform";
+	model = "Apple iPhone 6s (Samsung)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8000.dtsi b/arch/arm64/boot/dts/apple/s8000.dtsi
new file mode 100644
index 000000000000..72322f5677ab
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8000.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple S8000 "A9" (Samsung) SoC
+ *
+ * Other names: H8P, "Maui"
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+#include "s800-0-3.dtsi"
+
+/ {
+	twister_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <650>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <75000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <3>;
+			clock-latency-ns = <27000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-level = <4>;
+			clock-latency-ns = <32000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-level = <5>;
+			clock-latency-ns = <35000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-level = <6>;
+			clock-latency-ns = <45000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-level = <7>;
+			clock-latency-ns = <58000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp08 {
+			opp-hz = /bits/ 64 <1844000000>;
+			opp-level = <8>;
+			clock-latency-ns = <58000>;
+			turbo-mode;
+		};
+#endif
+	};
+};
+
+/*
+ * The A9 was made by two separate fabs on two different process
+ * nodes: Samsung made the S8000 (APL0898) on 14nm and TSMC made
+ * the S8003 (APL1022) on 16nm. There are some minor differences
+ * such as timing in cpufreq state transistions.
+ */
diff --git a/arch/arm64/boot/dts/apple/s8001-common.dtsi b/arch/arm64/boot/dts/apple/s8001-common.dtsi
new file mode 100644
index 000000000000..91b06e113894
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-common.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (9.7-inch), iPad Pro (12.9-inch)
+ *
+ * This file contains parts common to all Apple A9X devices.
+ *
+ * target-type: J127, J128, J98a, J99a
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0 &ps_dp0>;
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-j127.dts b/arch/arm64/boot/dts/apple/s8001-j127.dts
new file mode 100644
index 000000000000..8b522085cb3e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-j127.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (9.7-inch) (Wi-Fi), J127, iPad6,3 (A1673)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8001-pro.dtsi"
+
+/ {
+	compatible = "apple,j127", "apple,s8001", "apple,arm-platform";
+	model = "Apple iPad Pro (9.7-inch) (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-j128.dts b/arch/arm64/boot/dts/apple/s8001-j128.dts
new file mode 100644
index 000000000000..cdd3d06dcbf1
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-j128.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (9.7-inch) (Cellular), J128, iPad6,4 (A1674/A1675)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8001-pro.dtsi"
+
+/ {
+	compatible = "apple,j128", "apple,s8001", "apple,arm-platform";
+	model = "Apple iPad Pro (9.7-inch) (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-j98a-j99a.dtsi b/arch/arm64/boot/dts/apple/s8001-j98a-j99a.dtsi
new file mode 100644
index 000000000000..e66a4c1c138f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-j98a-j99a.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (12.9-inch)
+ *
+ * This file contains parts common to iPad Pro (12.9-inch).
+ *
+ * target-type: J98a, J99a
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+&ps_dcs4 {
+	apple,always-on; /* LPDDR4 interface */
+};
+
+&ps_dcs5 {
+	apple,always-on; /* LPDDR4 interface */
+};
+
+&ps_dcs6 {
+	apple,always-on; /* LPDDR4 interface */
+};
+
+&ps_dcs7 {
+	apple,always-on; /* LPDDR4 interface */
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-j98a.dts b/arch/arm64/boot/dts/apple/s8001-j98a.dts
new file mode 100644
index 000000000000..162eca05c2d9
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-j98a.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (12.9-inch) (Wi-Fi), J98a, iPad6,7 (A1584)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8001-pro.dtsi"
+#include "s8001-j98a-j99a.dtsi"
+
+/ {
+	compatible = "apple,j98a", "apple,s8001", "apple,arm-platform";
+	model = "Apple iPad Pro (12.9-inch) (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-j99a.dts b/arch/arm64/boot/dts/apple/s8001-j99a.dts
new file mode 100644
index 000000000000..7b765820c69e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-j99a.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (12.9-inch) (Cellular), J99a, iPad6,8 (A1652)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8001-pro.dtsi"
+#include "s8001-j98a-j99a.dtsi"
+
+/ {
+	compatible = "apple,j99a", "apple,s8001", "apple,arm-platform";
+	model = "Apple iPad Pro (12.9-inch) (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-pmgr.dtsi b/arch/arm64/boot/dts/apple/s8001-pmgr.dtsi
new file mode 100644
index 000000000000..859ab77ae92b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-pmgr.dtsi
@@ -0,0 +1,822 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple S8001 "A9X" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80148 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80150 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@80110 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@80118 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pcie_ref: power-controller@80140 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_mca0: power-controller@80160 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80168 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80170 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80178 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80180 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@80188 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@80190 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@80198 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801a0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801a8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801b0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801b8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801c0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801c8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@801d0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@801d8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@801e0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@801e8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@801f0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@801f8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80158 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsic0_phy: power-controller@80128 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_isp_sens0: power-controller@80130 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens0";
+	};
+
+	ps_isp_sens1: power-controller@80138 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens1";
+	};
+
+	ps_pms: power-controller@80120 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb: power-controller@80278 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@80280 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@80288 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@80298 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host2: power-controller@802a8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host2";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_rtmux: power-controller@802d0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rtmux";
+		apple,always-on; /* Core device */
+	};
+
+	ps_disp1mux: power-controller@802e8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1mux";
+	};
+
+	ps_disp0: power-controller@802d8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_disp1: power-controller@802f0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1";
+		power-domains = <&ps_disp1mux>;
+	};
+
+	ps_uart6: power-controller@80200 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@80208 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@80210 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_aes0: power-controller@80218 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80230 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80238 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@80240 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@80248 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@80250 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs4: power-controller@80258 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs4";
+	};
+
+	ps_dcs5: power-controller@80260 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs5";
+	};
+
+	ps_dcs6: power-controller@80268 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs6";
+	};
+
+	ps_dcs7: power-controller@80270 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs7";
+	};
+
+	ps_usb2host0_ohci: power-controller@80290 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usbotg: power-controller@802b8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@802c0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802c8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_dp0: power-controller@802e0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp0";
+		power-domains = <&ps_disp0>;
+	};
+
+	ps_dp1: power-controller@802f8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp1";
+		power-domains = <&ps_disp1>;
+	};
+
+	ps_dpa0: power-controller@80220 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa0";
+	};
+
+	ps_dpa1: power-controller@80228 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa1";
+	};
+
+	ps_media: power-controller@80308 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp: power-controller@80300 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_msr: power-controller@80318 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@80310 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_venc: power-controller@80340 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie: power-controller@80348 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_srs: power-controller@80390 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "srs";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie_aux: power-controller@80350 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_pcie_link0: power-controller@80358 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link0";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link1: power-controller@80360 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link1";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link2: power-controller@80368 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link2";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link3: power-controller@80370 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80370 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link3";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link4: power-controller@80378 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link4";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link5: power-controller@80380 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link5";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_vdec: power-controller@80330 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec";
+		power-domains = <&ps_media>;
+	};
+
+	ps_gfx: power-controller@80388 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_pmp: power-controller@80320 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@80328 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on*/
+	};
+
+	ps_venc_pipe: power-controller@88000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me0: power-controller@88008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88010 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_aop: power-controller@80000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop";
+		power-domains = <&ps_aop_cpu &ps_aop_filter &ps_aop_busif>;
+		apple,always-on; /* Always on processor */
+	};
+
+	ps_debug: power-controller@80008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_aop_gpio: power-controller@80010 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_gpio";
+	};
+
+	ps_aop_cpu: power-controller@80040 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_cpu";
+	};
+
+	ps_aop_filter: power-controller@80048 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80048 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_filter";
+	};
+
+	ps_aop_busif: power-controller@80050 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_busif";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-pro.dtsi b/arch/arm64/boot/dts/apple/s8001-pro.dtsi
new file mode 100644
index 000000000000..1fce5a7c4200
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-pro.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (1st generation) common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s8001.dtsi"
+#include "s8001-common.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl_ap 122 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl_ap 123 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl_ap 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl_ap 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s8001.dtsi b/arch/arm64/boot/dts/apple/s8001.dtsi
new file mode 100644
index 000000000000..b5b00dca6ffa
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001.dtsi
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple S8001 "A9X" SoC
+ *
+ * Other names: H8G, "Elba"
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,twister";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			operating-points-v2 = <&twister_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,twister";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			operating-points-v2 = <&twister_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x300000>;
+		};
+	};
+
+	twister_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <800>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <53000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-level = <3>;
+			clock-latency-ns = <18000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1080000000>;
+			opp-level = <4>;
+			clock-latency-ns = <21000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-level = <5>;
+			clock-latency-ns = <25000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-level = <6>;
+			clock-latency-ns = <33000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2160000000>;
+			opp-level = <7>;
+			clock-latency-ns = <45000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp08 {
+			opp-hz = /bits/ 64 <2160000000>;
+			opp-level = <8>;
+			clock-latency-ns = <45000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,s8000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a0c0000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0c0000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 218 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 232 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 233 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 234 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 235 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x8c000>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,s8000-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		pinctrl_ap: pinctrl@20f100000 {
+			compatible = "apple,s8000-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0f100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 219>;
+			apple,npins = <219>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(165, 1)>,
+					 <APPLE_PINMUX(164, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(178, 1)>,
+					 <APPLE_PINMUX(177, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(132, 1)>,
+					 <APPLE_PINMUX(131, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(115, 1)>,
+					 <APPLE_PINMUX(114, 1)>;
+			};
+		};
+
+		pinctrl_aop: pinctrl@2100f0000 {
+			compatible = "apple,s8000-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x100f0000 0x0 0x100000>;
+			power-domains = <&ps_aop_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 28>;
+			apple,npins = <28>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 134 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@210200000 {
+			compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x10200000 0 0x84000>;
+		};
+
+		wdt: watchdog@2102b0000 {
+			compatible = "apple,s8000-wdt", "apple,wdt";
+			reg = <0x2 0x102b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A9X doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "s8001-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/s8003-j71t.dts b/arch/arm64/boot/dts/apple/s8003-j71t.dts
new file mode 100644
index 000000000000..0d906ae80b07
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8003-j71t.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 5 (Wi-Fi) (TSMC), J71t, iPad6,11 (A1822)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8003.dtsi"
+#include "s800x-ipad5.dtsi"
+
+/ {
+	compatible = "apple,j71t", "apple,s8003", "apple,arm-platform";
+	model = "Apple iPad 5 (Wi-Fi) (TSMC)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8003-j72t.dts b/arch/arm64/boot/dts/apple/s8003-j72t.dts
new file mode 100644
index 000000000000..0cd7d88e9dfb
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8003-j72t.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 5 (Cellular) (TSMC), J72t, iPad6,12 (A1823)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8003.dtsi"
+#include "s800x-ipad5.dtsi"
+
+/ {
+	compatible = "apple,j72t", "apple,s8003", "apple,arm-platform";
+	model = "Apple iPad 5 (Cellular) (TSMC)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8003-n66m.dts b/arch/arm64/boot/dts/apple/s8003-n66m.dts
new file mode 100644
index 000000000000..4146cd28160d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8003-n66m.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6s Plus (TSMC), N66m, iPhone8,2 (A1634/A1687/A1690/A1699)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8003.dtsi"
+#include "s800x-6s.dtsi"
+
+/ {
+	compatible = "apple,n66m", "apple,s8003", "apple,arm-platform";
+	model = "Apple iPhone 6s Plus (TSMC)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8003-n69.dts b/arch/arm64/boot/dts/apple/s8003-n69.dts
new file mode 100644
index 000000000000..8eed879b155e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8003-n69.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone SE (TSMC), N69, iPhone8,4 (A1662/A1723/A1724)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8003.dtsi"
+#include "s800x-se.dtsi"
+
+/ {
+	compatible = "apple,n69", "apple,s8003", "apple,arm-platform";
+	model = "Apple iPhone SE (TSMC)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8003-n71m.dts b/arch/arm64/boot/dts/apple/s8003-n71m.dts
new file mode 100644
index 000000000000..7ec6d2cda0bf
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8003-n71m.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6s (TSMC), N71m, iPhone8,1 (A1633/A1688/A1691/A1700)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "s8003.dtsi"
+#include "s800x-6s.dtsi"
+
+/ {
+	compatible = "apple,n71m", "apple,s8003", "apple,arm-platform";
+	model = "Apple iPhone 6s (TSMC)";
+};
diff --git a/arch/arm64/boot/dts/apple/s8003.dtsi b/arch/arm64/boot/dts/apple/s8003.dtsi
new file mode 100644
index 000000000000..79df5c783260
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8003.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple S8003 "A9" (TSMC) SoC
+ *
+ * Other names: H8P, "Malta"
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+#include "s800-0-3.dtsi"
+
+/ {
+	twister_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <45000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <3>;
+			clock-latency-ns = <22000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-level = <4>;
+			clock-latency-ns = <25000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-level = <5>;
+			clock-latency-ns = <28000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-level = <6>;
+			clock-latency-ns = <35000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-level = <7>;
+			clock-latency-ns = <38000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp08 {
+			opp-hz = /bits/ 64 <1844000000>;
+			opp-level = <8>;
+			clock-latency-ns = <38000>;
+			turbo-mode;
+		};
+#endif
+	};
+};
+
+/*
+ * The A9 was made by two separate fabs on two different process
+ * nodes: Samsung made the S8000 (APL0898) on 14nm and TSMC made
+ * the S8003 (APL1022) on 16nm. There are some minor differences
+ * such as timing in cpufreq state transistions.
+ */
diff --git a/arch/arm64/boot/dts/apple/s800x-6s.dtsi b/arch/arm64/boot/dts/apple/s800x-6s.dtsi
new file mode 100644
index 000000000000..1dcf80cc2920
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800x-6s.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6s / 6S Plus common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s800-0-3-common.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "handset";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl_ap 96 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl_ap 97 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl_ap 67 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl_ap 66 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl_ap 149 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_mipi_dsi>;
+};
diff --git a/arch/arm64/boot/dts/apple/s800x-ipad5.dtsi b/arch/arm64/boot/dts/apple/s800x-ipad5.dtsi
new file mode 100644
index 000000000000..c1701e81f0c1
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800x-ipad5.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 5 common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s800-0-3-common.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl_ap 96 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl_ap 97 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl_ap 143 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl_ap 144 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_dp>;
+};
diff --git a/arch/arm64/boot/dts/apple/s800x-se.dtsi b/arch/arm64/boot/dts/apple/s800x-se.dtsi
new file mode 100644
index 000000000000..deb7c7cc90f6
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800x-se.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone SE common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "s800-0-3-common.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "handset";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl_ap 96 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl_ap 97 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl_ap 67 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl_ap 66 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl_ap 149 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_mipi_dsi>;
+};
diff --git a/arch/arm64/boot/dts/apple/spi1-nvram.dtsi b/arch/arm64/boot/dts/apple/spi1-nvram.dtsi
new file mode 100644
index 000000000000..9740fbf200f0
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/spi1-nvram.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Devicetree include for common spi-nor nvram flash.
+//
+// Apple uses a consistent configiguration for the nvram on all known M1* and
+// M2* devices.
+//
+// Copyright The Asahi Linux Contributors
+
+/ {
+	aliases {
+		nvram = &nvram;
+	};
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			nvram: partition@700000 {
+				label = "nvram";
+				/* To be filled by the loader */
+				reg = <0x0 0x0>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t6000-j314s.dts b/arch/arm64/boot/dts/apple/t6000-j314s.dts
new file mode 100644
index 000000000000..1430b91ff1b1
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6000-j314s.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M1 Pro, 2021)
+ *
+ * target-type: J314s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6000.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j314s", "apple,t6000", "apple,arm-platform";
+	model = "Apple MacBook Pro (14-inch, M1 Pro, 2021)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,maldives";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,maldives";
+};
diff --git a/arch/arm64/boot/dts/apple/t6000-j316s.dts b/arch/arm64/boot/dts/apple/t6000-j316s.dts
new file mode 100644
index 000000000000..da0cbe7d9673
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6000-j316s.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M1 Pro, 2021)
+ *
+ * target-type: J316s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6000.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j316s", "apple,t6000", "apple,arm-platform";
+	model = "Apple MacBook Pro (16-inch, M1 Pro, 2021)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,madagascar";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,madagascar";
+};
diff --git a/arch/arm64/boot/dts/apple/t6000.dtsi b/arch/arm64/boot/dts/apple/t6000.dtsi
new file mode 100644
index 000000000000..0ad77c98073f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6000.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6000 "M1 Pro" SoC
+ *
+ * Other names: H13J, "Jade Chop"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/* This chip is just a cut down version of t6001, so include it and disable the missing parts */
+
+#include "t6001.dtsi"
+
+/ {
+	compatible = "apple,t6000", "apple,arm-platform";
+};
+
+/delete-node/ &pmgr_south;
+
+&gpu {
+	compatible = "apple,agx-g13s";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j314c.dts b/arch/arm64/boot/dts/apple/t6001-j314c.dts
new file mode 100644
index 000000000000..c37097dcfdb3
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6001-j314c.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M1 Max, 2021)
+ *
+ * target-type: J314c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6001.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j314c", "apple,t6001", "apple,arm-platform";
+	model = "Apple MacBook Pro (14-inch, M1 Max, 2021)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,maldives";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,maldives";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j316c.dts b/arch/arm64/boot/dts/apple/t6001-j316c.dts
new file mode 100644
index 000000000000..3bc6e0c3294c
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6001-j316c.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M1 Max, 2021)
+ *
+ * target-type: J316c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6001.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j316c", "apple,t6001", "apple,arm-platform";
+	model = "Apple MacBook Pro (16-inch, M1 Max, 2021)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,madagascar";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,madagascar";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j375c.dts b/arch/arm64/boot/dts/apple/t6001-j375c.dts
new file mode 100644
index 000000000000..2e7c23714d4d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6001-j375c.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M1 Max, 2022)
+ *
+ * target-type: J375c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6001.dtsi"
+#include "t600x-j375.dtsi"
+
+/ {
+	compatible = "apple,j375c", "apple,t6001", "apple,arm-platform";
+	model = "Apple Mac Studio (M1 Max, 2022)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,okinawa";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,okinawa";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001.dtsi b/arch/arm64/boot/dts/apple/t6001.dtsi
new file mode 100644
index 000000000000..ffbe823b71bc
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6001.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6001 "M1 Max" SoC
+ *
+ * Other names: H13J, "Jade"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "multi-die-cpp.h"
+
+#include "t600x-common.dtsi"
+
+/ {
+	compatible = "apple,t6001", "apple,arm-platform";
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+};
+
+#define DIE
+#define DIE_NO 0
+
+&{/soc} {
+	#include "t600x-die0.dtsi"
+	#include "t600x-dieX.dtsi"
+	#include "t600x-nvme.dtsi"
+};
+
+#include "t600x-gpio-pins.dtsi"
+#include "t600x-pmgr.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+
+&aic {
+	affinities {
+		e-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_E>;
+			cpus = <&cpu_e00 &cpu_e01>;
+		};
+
+		p-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_P>;
+			cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+				&cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13>;
+		};
+	};
+};
+
+&gpu {
+	compatible = "apple,agx-g13c", "apple,agx-g13s";
+};
diff --git a/arch/arm64/boot/dts/apple/t6002-j375d.dts b/arch/arm64/boot/dts/apple/t6002-j375d.dts
new file mode 100644
index 000000000000..2b7f80119618
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6002-j375d.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M1 Ultra, 2022)
+ *
+ * target-type: J375d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6002.dtsi"
+#include "t600x-j375.dtsi"
+
+/ {
+	compatible = "apple,j375d", "apple,t6002", "apple,arm-platform";
+	model = "Apple Mac Studio (M1 Ultra, 2022)";
+};
+
+/* USB Type C */
+&i2c0 {
+	/* front-right */
+	hpm4: usb-pd@39 {
+		compatible = "apple,cd321x";
+		reg = <0x39>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	/* front-left */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&wifi0 {
+	brcm,board-type = "apple,okinawa";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,okinawa";
+};
+
+/* delete unused always-on power-domains on die 1 */
+
+/delete-node/ &ps_atc2_usb_aon_die1;
+/delete-node/ &ps_atc2_usb_die1;
+
+/delete-node/ &ps_atc3_usb_aon_die1;
+/delete-node/ &ps_atc3_usb_die1;
+
+/delete-node/ &ps_disp0_cpu0_die1;
+/delete-node/ &ps_disp0_fe_die1;
diff --git a/arch/arm64/boot/dts/apple/t6002.dtsi b/arch/arm64/boot/dts/apple/t6002.dtsi
new file mode 100644
index 000000000000..8fb648836b53
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6002.dtsi
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6002 "M1 Ultra" SoC
+ *
+ * Other names: H13J, "Jade 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "multi-die-cpp.h"
+
+#include "t600x-common.dtsi"
+
+/ {
+	compatible = "apple,t6002", "apple,arm-platform";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		cpu-map {
+			cluster3 {
+				core0 {
+					cpu = <&cpu_e10>;
+				};
+				core1 {
+					cpu = <&cpu_e11>;
+				};
+			};
+
+			cluster4 {
+				core0 {
+					cpu = <&cpu_p20>;
+				};
+				core1 {
+					cpu = <&cpu_p21>;
+				};
+				core2 {
+					cpu = <&cpu_p22>;
+				};
+				core3 {
+					cpu = <&cpu_p23>;
+				};
+			};
+
+			cluster5 {
+				core0 {
+					cpu = <&cpu_p30>;
+				};
+				core1 {
+					cpu = <&cpu_p31>;
+				};
+				core2 {
+					cpu = <&cpu_p32>;
+				};
+				core3 {
+					cpu = <&cpu_p33>;
+				};
+			};
+		};
+
+		cpu_e10: cpu@800 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x800>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_e11: cpu@801 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x801>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_p20: cpu@10900 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10900>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p21: cpu@10901 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10901>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p22: cpu@10902 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10902>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p23: cpu@10903 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10903>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p30: cpu@10a00 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a00>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p31: cpu@10a01 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a01>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p32: cpu@10a02 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a02>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p33: cpu@10a03 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a03>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		l2_cache_3: l2-cache-3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_4: l2-cache-4 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+
+		l2_cache_5: l2-cache-5 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+	};
+
+	die0: soc@200000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x2 0x0 0x2 0x0 0x4 0x0>,
+			 <0x5 0x80000000 0x5 0x80000000 0x1 0x80000000>,
+			 <0x7 0x0 0x7 0x0 0xf 0x80000000>;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+
+	die1: soc@2200000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x2 0x0 0x22 0x0 0x4 0x0>,
+			 <0x7 0x0 0x27 0x0 0xf 0x80000000>;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+};
+
+#define DIE
+#define DIE_NO 0
+
+&die0 {
+	#include "t600x-die0.dtsi"
+	#include "t600x-dieX.dtsi"
+};
+
+#include "t600x-pmgr.dtsi"
+#include "t600x-gpio-pins.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+#define DIE _die1
+#define DIE_NO 1
+
+&die1 {
+	#include "t600x-dieX.dtsi"
+	#include "t600x-nvme.dtsi"
+};
+
+#include "t600x-pmgr.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+&aic {
+	affinities {
+		e-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_E>;
+			cpus = <&cpu_e00 &cpu_e01
+				&cpu_e10 &cpu_e11>;
+		};
+
+		p-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_P>;
+			cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+				&cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13
+				&cpu_p20 &cpu_p21 &cpu_p22 &cpu_p23
+				&cpu_p30 &cpu_p31 &cpu_p32 &cpu_p33>;
+		};
+	};
+};
+
+&ps_gfx {
+	// On t6002, the die0 GPU power domain needs both AFR power domains
+	power-domains = <&ps_afr>, <&ps_afr_die1>;
+};
+
+&gpu {
+	compatible = "apple,agx-g13d", "apple,agx-g13s";
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-common.dtsi b/arch/arm64/boot/dts/apple/t600x-common.dtsi
new file mode 100644
index 000000000000..e20234ef2135
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-common.dtsi
@@ -0,0 +1,415 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Common Apple T6000 / T6001 / T6002 "M1 Pro/Max/Ultra" SoC
+ *
+ * Other names: H13J, "Jade Chop", "Jade", "Jade 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		gpu = &gpu;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e00>;
+				};
+				core1 {
+					cpu = <&cpu_e01>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p00>;
+				};
+				core1 {
+					cpu = <&cpu_p01>;
+				};
+				core2 {
+					cpu = <&cpu_p02>;
+				};
+				core3 {
+					cpu = <&cpu_p03>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu_p10>;
+				};
+				core1 {
+					cpu = <&cpu_p11>;
+				};
+				core2 {
+					cpu = <&cpu_p12>;
+				};
+				core3 {
+					cpu = <&cpu_p13>;
+				};
+			};
+		};
+
+		cpu_e00: cpu@0 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_e01: cpu@1 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_p00: cpu@10100 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p01: cpu@10101 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p02: cpu@10102 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10102>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p03: cpu@10103 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10103>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p10: cpu@10200 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10200>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p11: cpu@10201 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10201>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p12: cpu@10202 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10202>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p13: cpu@10203 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10203>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+
+		l2_cache_2: l2-cache-2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+	};
+
+	icestorm_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <972000000>;
+			opp-level = <2>;
+			clock-latency-ns = <23000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1332000000>;
+			opp-level = <3>;
+			clock-latency-ns = <29000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <4>;
+			clock-latency-ns = <40000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2064000000>;
+			opp-level = <5>;
+			clock-latency-ns = <50000>;
+		};
+	};
+
+	firestorm_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <8000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <828000000>;
+			opp-level = <2>;
+			clock-latency-ns = <18000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-level = <3>;
+			clock-latency-ns = <19000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-level = <4>;
+			clock-latency-ns = <23000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1524000000>;
+			opp-level = <5>;
+			clock-latency-ns = <24000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1752000000>;
+			opp-level = <6>;
+			clock-latency-ns = <28000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1980000000>;
+			opp-level = <7>;
+			clock-latency-ns = <31000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-level = <8>;
+			clock-latency-ns = <45000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2448000000>;
+			opp-level = <9>;
+			clock-latency-ns = <49000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2676000000>;
+			opp-level = <10>;
+			clock-latency-ns = <53000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2904000000>;
+			opp-level = <11>;
+			clock-latency-ns = <56000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <3036000000>;
+			opp-level = <12>;
+			clock-latency-ns = <56000>;
+		};
+		/* Not available until CPU deep sleep is implemented
+		opp13 {
+			opp-hz = /bits/ 64 <3132000000>;
+			opp-level = <13>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3168000000>;
+			opp-level = <14>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		opp15 {
+			opp-hz = /bits/ 64 <3228000000>;
+			opp-level = <15>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		*/
+	};
+
+	pmu-e {
+		compatible = "apple,icestorm-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-p {
+		compatible = "apple,firestorm-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <AIC_FIQ 0 AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	clk_200m: clock-200m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "clk_200m";
+	};
+
+	/*
+	 * This is a fabulated representation of the input clock
+	 * to NCO since we don't know the true clock tree.
+	 */
+	nco_clkref: clock-ref-nco {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "nco_ref";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpu_globals: globals {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_a: hw-cal-a {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_b: hw-cal-b {
+			status = "disabled";
+		};
+
+		uat_handoff: uat-handoff {
+			status = "disabled";
+		};
+
+		uat_pagetables: uat-pagetables {
+			status = "disabled";
+		};
+
+		uat_ttbs: uat-ttbs {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-die0.dtsi b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
new file mode 100644
index 000000000000..3603b276a2ab
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
@@ -0,0 +1,522 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Devices used on die 0 on the Apple T6002 "M1 Ultra" SoC and present on
+ * Apple T6000 / T6001 "M1 Pro" / "M1 Max".
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+
+	nco: clock-controller@28e03c000 {
+		compatible = "apple,t6000-nco", "apple,nco";
+		reg = <0x2 0x8e03c000 0x0 0x14000>;
+		clocks = <&nco_clkref>;
+		#clock-cells = <1>;
+	};
+
+	aic: interrupt-controller@28e100000 {
+		compatible = "apple,t6000-aic", "apple,aic2";
+		#interrupt-cells = <4>;
+		interrupt-controller;
+		reg = <0x2 0x8e100000 0x0 0xc000>,
+			<0x2 0x8e10c000 0x0 0x4>;
+		reg-names = "core", "event";
+		power-domains = <&ps_aic>;
+	};
+
+	smc: smc@290400000 {
+		compatible = "apple,t6000-smc", "apple,smc";
+		reg = <0x2 0x90400000 0x0 0x4000>,
+			<0x2 0x91e00000 0x0 0x100000>;
+		reg-names = "smc", "sram";
+		mboxes = <&smc_mbox>;
+
+		smc_gpio: gpio {
+			compatible = "apple,smc-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		smc_reboot: reboot {
+			compatible = "apple,smc-reboot";
+			nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+				<&boot_error_count>, <&panic_count>;
+			nvmem-cell-names = "shutdown_flag", "boot_stage",
+				"boot_error_count", "panic_count";
+		};
+	};
+
+	smc_mbox: mbox@290408000 {
+		compatible = "apple,t6000-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x2 0x90408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 754 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 755 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 756 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 757 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		#mbox-cells = <0>;
+	};
+
+	pinctrl_smc: pinctrl@290820000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x2 0x90820000 0x0 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pinctrl_smc 0 0 30>;
+		apple,npins = <30>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 743 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 744 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 745 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 746 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 747 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 748 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 749 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	nub_spmi0: spmi@2920a1300 {
+		compatible = "apple,t6000-spmi", "apple,spmi";
+		reg = <0x2 0x920a1300 0x0 0x100>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		pmic1: pmic@f {
+			compatible = "apple,maverick-pmic", "apple,spmi-nvmem";
+			reg = <0xf SPMI_USID>;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				pm_setting: pm-setting@1405 {
+					reg = <0x1405 0x1>;
+				};
+
+				rtc_offset: rtc-offset@1411 {
+					reg = <0x1411 0x6>;
+				};
+
+				boot_stage: boot-stage@6001 {
+					reg = <0x6001 0x1>;
+				};
+
+				boot_error_count: boot-error-count@6002,0 {
+					reg = <0x6002 0x1>;
+					bits = <0 4>;
+				};
+
+				panic_count: panic-count@6002,4 {
+					reg = <0x6002 0x1>;
+					bits = <4 4>;
+				};
+
+				boot_error_stage: boot-error-stage@6003 {
+					reg = <0x6003 0x1>;
+				};
+
+				shutdown_flag: shutdown-flag@600f,3 {
+					reg = <0x600f 0x1>;
+					bits = <3 1>;
+				};
+
+				fault_shadow: fault-shadow@867b {
+					reg = <0x867b 0x10>;
+				};
+
+				socd: socd@8b00 {
+					reg = <0x8b00 0x400>;
+				};
+			};
+		};
+	};
+
+	wdt: watchdog@2922b0000 {
+		compatible = "apple,t6000-wdt", "apple,wdt";
+		reg = <0x2 0x922b0000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 631 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	sio_dart_0: iommu@39b004000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x3 0x9b004000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1130 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		power-domains = <&ps_sio_cpu>;
+	};
+
+	sio_dart_1: iommu@39b008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x3 0x9b008000 0x0 0x8000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1130 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		power-domains = <&ps_sio_cpu>;
+	};
+
+	fpwm0: pwm@39b030000 {
+		compatible = "apple,t6000-fpwm", "apple,s5l-fpwm";
+		reg = <0x3 0x9b030000 0x0 0x4000>;
+		power-domains = <&ps_fpwm0>;
+		clocks = <&clkref>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@39b040000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b040000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1119 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c0_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c0>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+	};
+
+	i2c1: i2c@39b044000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b044000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1120 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c1_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c1>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@39b048000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b048000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1121 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c2_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c2>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@39b04c000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b04c000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1122 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c3_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c3>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@39b050000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b050000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1123 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c4_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c4>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@39b054000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1124 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c5_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c5>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	spi1: spi@39b104000 {
+		compatible = "apple,t6000-spi", "apple,spi";
+		reg = <0x3 0x9b104000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1107 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clk_200m>;
+		pinctrl-0 = <&spi1_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_spi1>;
+		status = "disabled";
+	};
+
+	spi3: spi@39b10c000 {
+		compatible = "apple,t6000-spi", "apple,spi";
+		reg = <0x3 0x9b10c000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1109 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkref>;
+		pinctrl-0 = <&spi3_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_spi3>;
+		status = "disabled";
+	};
+
+	serial0: serial@39b200000 {
+		compatible = "apple,s5l-uart";
+		reg = <0x3 0x9b200000 0x0 0x1000>;
+		reg-io-width = <4>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1097 IRQ_TYPE_LEVEL_HIGH>;
+		/*
+		 * TODO: figure out the clocking properly, there may
+		 * be a third selectable clock.
+		 */
+		clocks = <&clkref>, <&clkref>;
+		clock-names = "uart", "clk_uart_baud0";
+		power-domains = <&ps_uart0>;
+		status = "disabled";
+	};
+
+	admac: dma-controller@39b400000 {
+		compatible = "apple,t6000-admac", "apple,admac";
+		reg = <0x3 0x9b400000 0x0 0x34000>;
+		#dma-cells = <1>;
+		dma-channels = <16>;
+		interrupts-extended = <0>,
+				      <&aic AIC_IRQ 0 1118 IRQ_TYPE_LEVEL_HIGH>,
+				      <0>,
+				      <0>;
+		iommus = <&sio_dart_0 2>, <&sio_dart_1 2>;
+		power-domains = <&ps_sio_adma>;
+		resets = <&ps_audio_p>;
+	};
+
+	mca: mca@39b600000 {
+		compatible = "apple,t6000-mca", "apple,mca";
+		reg = <0x3 0x9b600000 0x0 0x10000>,
+		      <0x3 0x9b500000 0x0 0x20000>;
+		clocks = <&nco 0>, <&nco 1>, <&nco 2>, <&nco 3>;
+		dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+		       <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+		       <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+		       <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>;
+		dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+			    "tx1a", "rx1a", "tx1b", "rx1b",
+			    "tx2a", "rx2a", "tx2b", "rx2b",
+			    "tx3a", "rx3a", "tx3b", "rx3b";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1112 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1113 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1114 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1115 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+				<&ps_mca2>, <&ps_mca3>;
+		resets = <&ps_audio_p>;
+		#sound-dai-cells = <1>;
+	};
+
+	gpu: gpu@406400000 {
+		compatible = "apple,agx-g13s";
+		reg = <0x4 0x6400000 0 0x40000>,
+			<0x4 0x4000000 0 0x1000000>;
+		reg-names = "asc", "sgx";
+		mboxes = <&agx_mbox>;
+		power-domains = <&ps_gfx>;
+		memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+				<&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+		memory-region-names = "ttbs", "pagetables", "handoff",
+				      "hw-cal-a", "hw-cal-b", "globals";
+
+		apple,firmware-abi = <0 0 0>;
+	};
+
+	agx_mbox: mbox@406408000 {
+		compatible = "apple,t6000-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x4 0x6408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1059 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1060 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1061 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1062 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		#mbox-cells = <0>;
+	};
+
+	pcie0_dart_0: iommu@581008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x81008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1271 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+	};
+
+	pcie0_dart_1: iommu@582008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x82008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1274 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+	};
+
+	pcie0_dart_2: iommu@583008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x83008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1277 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
+	};
+
+	pcie0_dart_3: iommu@584008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x84008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1280 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
+	};
+
+	pcie0: pcie@590000000 {
+		compatible = "apple,t6000-pcie", "apple,pcie";
+		device_type = "pci";
+
+		reg = <0x5 0x90000000 0x0 0x1000000>,
+			<0x5 0x80000000 0x0 0x100000>,
+			<0x5 0x81000000 0x0 0x4000>,
+			<0x5 0x82000000 0x0 0x4000>,
+			<0x5 0x83000000 0x0 0x4000>,
+			<0x5 0x84000000 0x0 0x4000>;
+		reg-names = "config", "rc", "port0", "port1", "port2", "port3";
+
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1270 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1273 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1276 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1279 IRQ_TYPE_LEVEL_HIGH>;
+
+		msi-controller;
+		msi-parent = <&pcie0>;
+		msi-ranges = <&aic AIC_IRQ 0 1581 IRQ_TYPE_EDGE_RISING 32>;
+
+
+		iommu-map = <0x100 &pcie0_dart_0 1 1>,
+				<0x200 &pcie0_dart_1 1 1>,
+				<0x300 &pcie0_dart_2 1 1>,
+				<0x400 &pcie0_dart_3 1 1>;
+		iommu-map-mask = <0xff00>;
+
+		bus-range = <0 4>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x43000000 0x5 0xa0000000 0x5 0xa0000000 0x0 0x20000000>,
+				<0x02000000 0x0 0xc0000000 0x5 0xc0000000 0x0 0x40000000>;
+
+		power-domains = <&ps_apcie_gp_sys>;
+		pinctrl-0 = <&pcie_pins>;
+		pinctrl-names = "default";
+
+		port00: pci@0,0 {
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 4 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port00 0 0 0 0>,
+					<0 0 0 2 &port00 0 0 0 1>,
+					<0 0 0 3 &port00 0 0 0 2>,
+					<0 0 0 4 &port00 0 0 0 3>;
+		};
+
+		port01: pci@1,0 {
+			device_type = "pci";
+			reg = <0x800 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 5 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port01 0 0 0 0>,
+					<0 0 0 2 &port01 0 0 0 1>,
+					<0 0 0 3 &port01 0 0 0 2>,
+					<0 0 0 4 &port01 0 0 0 3>;
+		};
+
+		port02: pci@2,0 {
+			device_type = "pci";
+			reg = <0x1000 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 6 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port02 0 0 0 0>,
+					<0 0 0 2 &port02 0 0 0 1>,
+					<0 0 0 3 &port02 0 0 0 2>,
+					<0 0 0 4 &port02 0 0 0 3>;
+			status = "disabled";
+		};
+
+		port03: pci@3,0 {
+			device_type = "pci";
+			reg = <0x1800 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 7 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port03 0 0 0 0>,
+					<0 0 0 2 &port03 0 0 0 1>,
+					<0 0 0 3 &port03 0 0 0 2>,
+					<0 0 0 4 &port03 0 0 0 3>;
+			status = "disabled";
+		};
+	};
diff --git a/arch/arm64/boot/dts/apple/t600x-dieX.dtsi b/arch/arm64/boot/dts/apple/t600x-dieX.dtsi
new file mode 100644
index 000000000000..a32ff0c9d7b0
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-dieX.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Devices used on both dies on the Apple T6002 "M1 Ultra" and present on
+ * Apple T6000/T6001 "M1 Pro/Max".
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	DIE_NODE(cpufreq_e): cpufreq@210e20000 {
+		compatible = "apple,t6000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+		reg = <0x2 0x10e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(cpufreq_p0): cpufreq@211e20000 {
+		compatible = "apple,t6000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+		reg = <0x2 0x11e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(cpufreq_p1): cpufreq@212e20000 {
+		compatible = "apple,t6000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+		reg = <0x2 0x12e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(pmgr): power-management@28e080000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e080000 0 0x4000>;
+	};
+
+	DIE_NODE(pmgr_east): power-management@28e580000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e580000 0 0xc000>;
+	};
+
+	DIE_NODE(pmgr_south): power-management@28e680000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e680000 0 0xc000>;
+	};
+
+	DIE_NODE(pinctrl_nub): pinctrl@2921f0000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x2 0x921f0000 0x0 0x4000>;
+		power-domains = <&DIE_NODE(ps_nub_gpio)>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_nub) 0 0 16>;
+		apple,npins = <16>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 623 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 624 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 625 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 626 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 627 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 628 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 629 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	DIE_NODE(pmgr_mini): power-management@292280000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x92280000 0 0x4000>;
+	};
+
+	DIE_NODE(pinctrl_aop): pinctrl@293820000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x2 0x93820000 0x0 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_aop) 0 0 63>;
+		apple,npins = <63>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 567 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 568 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 569 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 570 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 571 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 572 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 573 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	DIE_NODE(pinctrl_ap): pinctrl@39b028000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x3 0x9b028000 0x0 0x4000>;
+
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 427 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 428 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 429 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 430 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 431 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 432 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 433 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&clkref>;
+		power-domains = <&DIE_NODE(ps_gpio)>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_ap) 0 0 255>;
+		apple,npins = <255>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
diff --git a/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi b/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi
new file mode 100644
index 000000000000..1a994c3c1b79
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * GPIO pin mappings for Apple T600x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&pinctrl_ap {
+	i2c0_pins: i2c0-pins {
+		pinmux = <APPLE_PINMUX(92, 1)>,
+			<APPLE_PINMUX(93, 1)>;
+	};
+
+	i2c1_pins: i2c1-pins {
+		pinmux = <APPLE_PINMUX(94, 1)>,
+			<APPLE_PINMUX(95, 1)>;
+	};
+
+	i2c2_pins: i2c2-pins {
+		pinmux = <APPLE_PINMUX(96, 1)>,
+			<APPLE_PINMUX(97, 1)>;
+	};
+
+	i2c3_pins: i2c3-pins {
+		pinmux = <APPLE_PINMUX(98, 1)>,
+			<APPLE_PINMUX(99, 1)>;
+	};
+
+	i2c4_pins: i2c4-pins {
+		pinmux = <APPLE_PINMUX(8, 1)>,
+			<APPLE_PINMUX(9, 1)>;
+	};
+
+	i2c5_pins: i2c5-pins {
+		pinmux = <APPLE_PINMUX(100, 1)>,
+			<APPLE_PINMUX(101, 1)>;
+	};
+
+	spi1_pins: spi1-pins {
+		pinmux = <APPLE_PINMUX(10, 1)>,
+			<APPLE_PINMUX(11, 1)>,
+			<APPLE_PINMUX(32, 1)>,
+			<APPLE_PINMUX(33, 1)>;
+	};
+
+	spi3_pins: spi3-pins {
+		pinmux = <APPLE_PINMUX(52, 1)>,
+			<APPLE_PINMUX(53, 1)>,
+			<APPLE_PINMUX(54, 1)>,
+			<APPLE_PINMUX(55, 1)>;
+	};
+
+	pcie_pins: pcie-pins {
+		pinmux = <APPLE_PINMUX(0, 1)>,
+				<APPLE_PINMUX(1, 1)>,
+				<APPLE_PINMUX(2, 1)>,
+				<APPLE_PINMUX(3, 1)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
new file mode 100644
index 000000000000..c0aac59a6fae
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14/16-inch, 2021)
+ *
+ * This file contains the parts common to J314 and J316 devices with both t6000 and t6001.
+ *
+ * target-type: J314s / J314c / J316s / J316c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		bluetooth0 = &bluetooth0;
+		serial0 = &serial0;
+		wifi0 = &wifi0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@10000000000 {
+		device_type = "memory";
+		reg = <0x100 0 0x2 0>; /* To be filled by loader */
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm0 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+/* USB Type C */
+&i2c0 {
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm2: usb-pd@3b {
+		compatible = "apple,cd321x";
+		reg = <0x3b>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	/* MagSafe port */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&nco_clkref {
+	clock-frequency = <1068000000>;
+};
+
+/* PCIe devices */
+&port00 {
+	/* WLAN */
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4433";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+		apple,antenna-sku = "XX";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f71";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
+	};
+};
+
+&port01 {
+	/* SD card reader */
+	bus-range = <2 2>;
+	sdhci0: mmc@0,0 {
+		compatible = "pci17a0,9755";
+		reg = <0x20000 0x0 0x0 0x0 0x0>;
+		cd-inverted;
+		wp-inverted;
+	};
+};
+
+&fpwm0 {
+	status = "okay";
+};
+
+#include "spi1-nvram.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t600x-j375.dtsi b/arch/arm64/boot/dts/apple/t600x-j375.dtsi
new file mode 100644
index 000000000000..c0fb93ae72f4
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-j375.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (2022)
+ *
+ * This file contains the parts common to J375 devices with both t6001 and t6002.
+ *
+ * target-type: J375c / J375d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	aliases {
+		bluetooth0 = &bluetooth0;
+		ethernet0 = &ethernet0;
+		serial0 = &serial0;
+		wifi0 = &wifi0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@10000000000 {
+		device_type = "memory";
+		reg = <0x100 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+/* USB Type C */
+&i2c0 {
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm2: usb-pd@3b {
+		compatible = "apple,cd321x";
+		reg = <0x3b>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm3: usb-pd@3c {
+		compatible = "apple,cd321x";
+		reg = <0x3c>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&nco_clkref {
+	clock-frequency = <1068000000>;
+};
+
+/* PCIe devices */
+&port00 {
+	/* WLAN */
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4433";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+		apple,antenna-sku = "XX";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f71";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
+	};
+};
+
+&port01 {
+	/* SD card reader */
+	bus-range = <2 2>;
+	sdhci0: mmc@0,0 {
+		compatible = "pci17a0,9755";
+		reg = <0x20000 0x0 0x0 0x0 0x0>;
+		cd-inverted;
+		wp-inverted;
+	};
+};
+
+&port02 {
+	/* 10 Gbit Ethernet */
+	bus-range = <3 3>;
+	status = "okay";
+	ethernet0: ethernet@0,0 {
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 00];
+	};
+};
+
+&port03 {
+	/* USB xHCI */
+	bus-range = <4 4>;
+	status = "okay";
+};
+
+
+&pcie0_dart_2 {
+	status = "okay";
+};
+
+&pcie0_dart_3 {
+	status = "okay";
+};
+
+#include "spi1-nvram.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t600x-nvme.dtsi b/arch/arm64/boot/dts/apple/t600x-nvme.dtsi
new file mode 100644
index 000000000000..7dff738d317e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-nvme.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * NVMe related devices for Apple T600x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	DIE_NODE(ans_mbox): mbox@38f408000 {
+		compatible = "apple,t6000-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x3 0x8f408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 1069 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1070 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1071 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1072 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		power-domains = <&DIE_NODE(ps_ans2)>;
+		#mbox-cells = <0>;
+	};
+
+	DIE_NODE(sart): sart@393c50000 {
+		compatible = "apple,t6000-sart";
+		reg = <0x3 0x93c50000 0x0 0x10000>;
+		power-domains = <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(nvme): nvme@393cc0000 {
+		compatible = "apple,t6000-nvme-ans2", "apple,nvme-ans2";
+		reg = <0x3 0x93cc0000 0x0 0x40000>, <0x3 0x8f400000 0x0 0x4000>;
+		reg-names = "nvme", "ans";
+		interrupt-parent = <&aic>;
+		/* The NVME interrupt is always routed to die */
+		interrupts = <AIC_IRQ 0 1613 IRQ_TYPE_LEVEL_HIGH>;
+		mboxes = <&DIE_NODE(ans_mbox)>;
+		apple,sart = <&DIE_NODE(sart)>;
+		power-domains = <&DIE_NODE(ps_ans2)>,
+			<&DIE_NODE(ps_apcie_st_sys)>,
+			<&DIE_NODE(ps_apcie_st1_sys)>;
+		power-domain-names = "ans", "apcie0", "apcie1";
+		resets = <&DIE_NODE(ps_ans2)>;
+	};
diff --git a/arch/arm64/boot/dts/apple/t600x-pmgr.dtsi b/arch/arm64/boot/dts/apple/t600x-pmgr.dtsi
new file mode 100644
index 000000000000..0bd44753b76a
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-pmgr.dtsi
@@ -0,0 +1,2012 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T6001 "M1 Max" SoC
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&DIE_NODE(pmgr) {
+	DIE_NODE(ps_pms_bridge): power-controller@100 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_bridge);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_aic): power-controller@108 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(aic);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_dwi): power-controller@110 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dwi);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_pms): power-controller@118 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_gpio): power-controller@120 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gpio);
+		power-domains = <&DIE_NODE(ps_pms)>, <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_soc_dpe): power-controller@128 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(soc_dpe);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_pmgr_soc_ocla): power-controller@130 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pmgr_soc_ocla);
+		power-domains = <&DIE_NODE(ps_pms)>;
+	};
+
+	DIE_NODE(ps_pcie0_ref): power-controller@138 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pcie0_ref);
+	};
+
+	DIE_NODE(ps_pcie1_ref): power-controller@140 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pcie1_ref);
+	};
+
+	DIE_NODE(ps_apcie_st): power-controller@148 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st);
+		power-domains = <&DIE_NODE(ps_pcie1_ref)>;
+	};
+
+	DIE_NODE(ps_apcie_gp): power-controller@150 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gp);
+		power-domains = <&DIE_NODE(ps_pcie0_ref)>;
+	};
+
+	DIE_NODE(ps_devc0_ivdmc): power-controller@180 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(devc0_ivdmc);
+	};
+
+	DIE_NODE(ps_amcc0): power-controller@188 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc0);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc2): power-controller@190 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc2);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_00): power-controller@198 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_00);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_01): power-controller@1a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_01);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_02): power-controller@1a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_02);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_03): power-controller@1b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_03);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_08): power-controller@1b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_08);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_09): power-controller@1c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_09);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_10): power-controller@1c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_10);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_11): power-controller@1d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_11);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_afi): power-controller@1d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afi);
+		apple,always-on; /* Apple Fabric, CPU interface is here */
+	};
+
+	DIE_NODE(ps_afc): power-controller@1e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afc);
+		apple,always-on; /* Apple Fabric, CPU interface is here */
+	};
+
+	DIE_NODE(ps_afr): power-controller@1e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afr);
+		/* Apple Fabric, media stuff: this can power down */
+	};
+
+	DIE_NODE(ps_afnc1_ioa): power-controller@1f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc0_ioa): power-controller@1f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc1_ls): power-controller@200 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc0_ls): power-controller@208 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc0_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw0): power-controller@210 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw1): power-controller@218 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw1);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw2): power-controller@220 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw2);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc0_lw0): power-controller@228 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc0_ls)>;
+	};
+
+	DIE_NODE(ps_scodec): power-controller@230 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(scodec);
+		power-domains = <&DIE_NODE(ps_afnc1_lw0)>;
+	};
+
+	DIE_NODE(ps_atc0_common): power-controller@238 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc1_common): power-controller@240 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_c0_usb31drd): power-controller@248 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c0_usb31drd);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_c1_usb31drd): power-controller@250 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c1_usb31drd);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_dispext0_fe): power-controller@258 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_fe);
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_dispext1_fe): power-controller@260 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_fe);
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_ane_sys): power-controller@268 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_sys);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_avd_sys): power-controller@270 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(avd_sys);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_dispext0_cpu0): power-controller@280 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext0_fe)>;
+	};
+
+	DIE_NODE(ps_dispext1_cpu0): power-controller@2a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext1_fe)>;
+	};
+
+	DIE_NODE(ps_ane_sys_cpu): power-controller@2c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_sys_cpu);
+		power-domains = <&DIE_NODE(ps_ane_sys)>;
+	};
+
+#if DIE_NO == 0
+	/* PMP is only present on die 0 of the M1 Ultra */
+	DIE_NODE(ps_pmp): power-controller@2d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pmp);
+	};
+#endif
+
+	DIE_NODE(ps_pms_sram): power-controller@2e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_sram);
+	};
+
+	DIE_NODE(ps_apcie_st_sys): power-controller@2e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st_sys);
+		power-domains = <&DIE_NODE(ps_apcie_st)>, <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(ps_apcie_st1_sys): power-controller@2f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st1_sys);
+		power-domains = <&DIE_NODE(ps_apcie_st)>, <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(ps_atc2_common): power-controller@2f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc3_common): power-controller@300 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_usb): power-controller@318 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(usb);
+		power-domains = <&DIE_NODE(ps_afnc1_lw2)>;
+	};
+
+	DIE_NODE(ps_apcie_gp_sys): power-controller@320 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gp_sys);
+		power-domains = <&DIE_NODE(ps_afnc1_lw2)>, <&DIE_NODE(ps_apcie_gp)>;
+		apple,always-on; /* Breaks things if shut down */
+	};
+
+	DIE_NODE(ps_atc0_cio): power-controller@328 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc0_pcie): power-controller@330 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_pcie);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc1_cio): power-controller@338 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc1_pcie): power-controller@340 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_pcie);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc2_cio): power-controller@348 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc2_pcie): power-controller@350 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_pcie);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc3_cio): power-controller@358 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+	DIE_NODE(ps_atc3_pcie): power-controller@360 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_pcie);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+	DIE_NODE(ps_c0_usbctl): power-controller@368 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c0_usbctl);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_c1_usbctl): power-controller@370 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x370 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c1_usbctl);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_atc0_cio_pcie): power-controller@378 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc0_cio)>;
+	};
+
+	DIE_NODE(ps_atc0_cio_usb): power-controller@380 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc0_cio)>;
+	};
+
+	DIE_NODE(ps_atc1_cio_pcie): power-controller@388 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc1_cio)>;
+	};
+
+	DIE_NODE(ps_atc1_cio_usb): power-controller@390 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc1_cio)>;
+	};
+
+	DIE_NODE(ps_atc2_cio_pcie): power-controller@398 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x398 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc2_cio)>;
+	};
+
+	DIE_NODE(ps_atc2_cio_usb): power-controller@3a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc2_cio)>;
+	};
+
+	DIE_NODE(ps_atc3_cio_pcie): power-controller@3a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc3_cio)>;
+	};
+
+	DIE_NODE(ps_atc3_cio_usb): power-controller@3b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc3_cio)>;
+	};
+
+	DIE_NODE(ps_trace_fab): power-controller@3b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(trace_fab);
+	};
+};
+
+&DIE_NODE(pmgr_east) {
+	DIE_NODE(ps_clvr_spmi0): power-controller@100 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi0);
+		apple,always-on; /* PCPU voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi1): power-controller@108 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi1);
+		apple,always-on; /* GPU voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi2): power-controller@110 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi2);
+		apple,always-on; /* ANE, fabric, AFR voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi3): power-controller@118 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi3);
+		apple,always-on; /* Additional voltage regulator, probably used on T6001 (SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi4): power-controller@120 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi4);
+		apple,always-on; /* Additional voltage regulator, probably used on T6001 (SMC) */
+	};
+
+	DIE_NODE(ps_ispsens0): power-controller@128 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens0);
+	};
+
+	DIE_NODE(ps_ispsens1): power-controller@130 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens1);
+	};
+
+	DIE_NODE(ps_ispsens2): power-controller@138 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens2);
+	};
+
+	DIE_NODE(ps_ispsens3): power-controller@140 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens3);
+	};
+
+	DIE_NODE(ps_afnc2_ioa): power-controller@148 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc2_ls): power-controller@150 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc2_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc2_lw0): power-controller@158 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+	};
+
+	DIE_NODE(ps_afnc2_lw1): power-controller@160 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_lw1);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+	};
+
+	DIE_NODE(ps_afnc3_ioa): power-controller@168 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc3_ls): power-controller@170 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc3_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc3_lw0): power-controller@178 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc3_ls)>;
+	};
+
+	DIE_NODE(ps_sio): power-controller@180 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_sio_cpu): power-controller@188 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_cpu);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm0): power-controller@190 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm1): power-controller@198 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm2): power-controller@1a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c0): power-controller@1a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c1): power-controller@1b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c2): power-controller@1b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c3): power-controller@1c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c3);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c4): power-controller@1c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c4);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c5): power-controller@1d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c5);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c6): power-controller@1d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c6);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c7): power-controller@1e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c7);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_spi_p): power-controller@1e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_spi0): power-controller@1f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi0);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi1): power-controller@1f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi1);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi2): power-controller@200 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi2);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi3): power-controller@208 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi3);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi4): power-controller@210 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi4);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_sio_spmi0): power-controller@218 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi1): power-controller@220 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi2): power-controller@228 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_uart_p): power-controller@230 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_uart_n): power-controller@238 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart_n);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart0): power-controller@240 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart0);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart1): power-controller@248 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart1);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart2): power-controller@250 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart2);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart3): power-controller@258 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart3);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart4): power-controller@260 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart4);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart6): power-controller@268 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart6);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart7): power-controller@270 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart7);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_audio_p): power-controller@278 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(audio_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_adma): power-controller@280 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_adma);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_mca0): power-controller@288 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca0);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca1): power-controller@290 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca1);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca2): power-controller@298 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca2);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca3): power-controller@2a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca3);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_dpa0): power-controller@2a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa0);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa1): power-controller@2b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa1);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa2): power-controller@2b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa2);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa3): power-controller@2c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa3);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa4): power-controller@2c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa4);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_aes): power-controller@2d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(aes);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_amcc1): power-controller@2d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc1);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc3): power-controller@2e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc3);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_04): power-controller@2e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_04);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_05): power-controller@2f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_05);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_06): power-controller@2f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_06);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_07): power-controller@300 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_07);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_12): power-controller@308 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_12);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_13): power-controller@310 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_13);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_14): power-controller@318 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_14);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_15): power-controller@320 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_15);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_disp0_fe): power-controller@328 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_fe);
+		power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+	};
+
+	DIE_NODE(ps_disp0_cpu0): power-controller@350 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_cpu0);
+		power-domains = <&DIE_NODE(ps_disp0_fe)>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_dispdfr_fe): power-controller@378 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispdfr_fe);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_dispdfr_be): power-controller@380 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispdfr_be);
+		power-domains = <&DIE_NODE(ps_dispdfr_fe)>;
+	};
+
+	DIE_NODE(ps_mipi_dsi): power-controller@388 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mipi_dsi);
+		power-domains = <&DIE_NODE(ps_dispdfr_be)>;
+	};
+
+	DIE_NODE(ps_jpg): power-controller@390 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(jpg);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_msr0): power-controller@398 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x398 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr0);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_msr0_ase_core): power-controller@3a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr0_ase_core);
+		power-domains = <&DIE_NODE(ps_msr0)>;
+	};
+
+	DIE_NODE(ps_isp_sys): power-controller@3a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_sys);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_venc_sys): power-controller@3b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_sys);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_ans2): power-controller@3b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ans2);
+		/*
+		 * The ADT makes ps_apcie_st[1]_sys depend on ps_ans2 instead,
+		 * but we'd rather have a single power domain for the downstream
+		 * device to depend on, so use this node as the child.
+		 * This makes more sense anyway (since ANS2 uses APCIE_ST).
+		 */
+		power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+	};
+
+	DIE_NODE(ps_gfx): power-controller@3c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gfx);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_sep): power-controller@c00 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc00 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sep);
+		apple,always-on; /* Locked on */
+	};
+
+	DIE_NODE(ps_venc_dma): power-controller@8000 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_dma);
+		power-domains = <&DIE_NODE(ps_venc_sys)>;
+	};
+
+	DIE_NODE(ps_venc_pipe4): power-controller@8008 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_pipe4);
+		power-domains = <&DIE_NODE(ps_venc_dma)>;
+	};
+
+	DIE_NODE(ps_venc_pipe5): power-controller@8010 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_pipe5);
+		power-domains = <&DIE_NODE(ps_venc_dma)>;
+	};
+
+	DIE_NODE(ps_venc_me0): power-controller@8018 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_me0);
+		power-domains = <&DIE_NODE(ps_venc_pipe5)>, <&DIE_NODE(ps_venc_pipe4)>;
+	};
+
+	DIE_NODE(ps_venc_me1): power-controller@8020 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_me1);
+		power-domains = <&DIE_NODE(ps_venc_me0)>;
+	};
+};
+
+&DIE_NODE(pmgr_south) {
+	DIE_NODE(ps_amcc4): power-controller@100 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc4);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc5): power-controller@108 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc5);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc6): power-controller@110 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc6);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc7): power-controller@118 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc7);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_16): power-controller@120 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_16);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_17): power-controller@128 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_17);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_18): power-controller@130 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_18);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_19): power-controller@138 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_19);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_20): power-controller@140 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_20);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_21): power-controller@148 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_21);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_22): power-controller@150 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_22);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_23): power-controller@158 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_23);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_24): power-controller@160 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_24);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_25): power-controller@168 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_25);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_26): power-controller@170 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_26);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_27): power-controller@178 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_27);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_28): power-controller@180 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_28);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_29): power-controller@188 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_29);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_30): power-controller@190 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_30);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_31): power-controller@198 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_31);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_afnc4_ioa): power-controller@1a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc4_ls): power-controller@1a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc4_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc4_lw0): power-controller@1b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc4_ls)>;
+	};
+
+	DIE_NODE(ps_afnc5_ioa): power-controller@1b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc5_ls): power-controller@1c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc5_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc5_lw0): power-controller@1c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc5_ls)>;
+	};
+
+	DIE_NODE(ps_dispext2_fe): power-controller@1d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_fe);
+		power-domains = <&DIE_NODE(ps_afnc4_lw0)>;
+	};
+
+	DIE_NODE(ps_dispext2_cpu0): power-controller@1e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext2_fe)>;
+	};
+
+	DIE_NODE(ps_dispext3_fe): power-controller@210 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_fe);
+		power-domains = <&DIE_NODE(ps_afnc4_lw0)>;
+	};
+
+	DIE_NODE(ps_dispext3_cpu0): power-controller@228 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext3_fe)>;
+	};
+
+	DIE_NODE(ps_msr1): power-controller@250 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr1);
+		power-domains = <&DIE_NODE(ps_afnc5_lw0)>, <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_msr1_ase_core): power-controller@258 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr1_ase_core);
+		power-domains = <&DIE_NODE(ps_msr1)>;
+	};
+
+	DIE_NODE(ps_venc1_sys): power-controller@260 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_sys);
+		power-domains = <&DIE_NODE(ps_afnc5_lw0)>, <&DIE_NODE(ps_afr)>;
+	};
+
+	/* Seems to be disabled on shipping hardware */
+#if 0
+	DIE_NODE(ps_ane1_sys): power-controller@268 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane1_sys);
+		power-domains = <&DIE_NODE(ps_afnc5_lw0)>;
+	};
+
+	DIE_NODE(ps_ane1_sys_cpu): power-controller@270 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane1_sys_cpu);
+		power-domains = <&DIE_NODE(ps_ane1_sys)>;
+	};
+#endif
+
+	DIE_NODE(ps_venc1_dma): power-controller@8000 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_dma);
+		power-domains = <&DIE_NODE(ps_venc1_sys)>;
+	};
+
+	DIE_NODE(ps_venc1_pipe4): power-controller@8008 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_pipe4);
+		power-domains = <&DIE_NODE(ps_venc1_dma)>;
+	};
+
+	DIE_NODE(ps_venc1_pipe5): power-controller@8010 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_pipe5);
+		power-domains = <&DIE_NODE(ps_venc1_dma)>;
+	};
+
+	DIE_NODE(ps_venc1_me0): power-controller@8018 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_me0);
+		power-domains = <&DIE_NODE(ps_venc1_pipe4)>, <&DIE_NODE(ps_venc1_pipe5)>;
+	};
+
+	DIE_NODE(ps_venc1_me1): power-controller@8020 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_me1);
+		power-domains = <&DIE_NODE(ps_venc1_me0)>;
+	};
+
+	DIE_NODE(ps_prores): power-controller@c000 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(prores);
+		power-domains = <&DIE_NODE(ps_afnc4_lw0)>;
+	};
+};
+
+&DIE_NODE(pmgr_mini) {
+	DIE_NODE(ps_debug): power-controller@58 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x58 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_spmi0): power-controller@60 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x60 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_spmi0);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_spmi1): power-controller@68 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x68 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_spmi1);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_aon): power-controller@70 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x70 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_aon);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_msg): power-controller@78 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x78 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msg);
+	};
+
+	DIE_NODE(ps_nub_gpio): power-controller@80 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_gpio);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_atc0_usb_aon): power-controller@88 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc1_usb_aon): power-controller@90 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x90 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc2_usb_aon): power-controller@98 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x98 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc3_usb_aon): power-controller@a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_gp_usb_aon): power-controller@a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gp_usb_aon);
+	};
+
+	DIE_NODE(ps_nub_fabric): power-controller@b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_fabric);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_sram): power-controller@b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_sram);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_debug_usb): power-controller@c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug_usb);
+		apple,always-on; /* Core AON device */
+		power-domains = <&DIE_NODE(ps_debug)>;
+	};
+
+	DIE_NODE(ps_debug_auth): power-controller@c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug_auth);
+		apple,always-on; /* Core AON device */
+		power-domains = <&DIE_NODE(ps_debug)>;
+	};
+
+	DIE_NODE(ps_atc0_usb): power-controller@d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xd0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_usb);
+		power-domains = <&DIE_NODE(ps_atc0_usb_aon)>, <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc1_usb): power-controller@d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xd8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_usb);
+		power-domains = <&DIE_NODE(ps_atc1_usb_aon)>, <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc2_usb): power-controller@e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xe0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_usb);
+		power-domains = <&DIE_NODE(ps_atc2_usb_aon)>, <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc3_usb): power-controller@e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xe8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_usb);
+		power-domains = <&DIE_NODE(ps_atc3_usb_aon)>, <&DIE_NODE(ps_atc3_common)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t6020-j414s.dts b/arch/arm64/boot/dts/apple/t6020-j414s.dts
new file mode 100644
index 000000000000..631c54c5f03d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020-j414s.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M2 Pro, 2023)
+ *
+ * target-type: J414s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6020.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+	compatible = "apple,j414s", "apple,t6020", "apple,arm-platform";
+	model = "Apple MacBook Pro (14-inch, M2 Pro, 2023)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,tokara";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,tokara";
+};
diff --git a/arch/arm64/boot/dts/apple/t6020-j416s.dts b/arch/arm64/boot/dts/apple/t6020-j416s.dts
new file mode 100644
index 000000000000..c277ed5889a2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020-j416s.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M2 Pro, 2023)
+ *
+ * target-type: J416s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6020.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+	compatible = "apple,j416s", "apple,t6020", "apple,arm-platform";
+	model = "Apple MacBook Pro (16-inch, M2 Pro, 2023)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,amami";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,amami";
+};
diff --git a/arch/arm64/boot/dts/apple/t6020-j474s.dts b/arch/arm64/boot/dts/apple/t6020-j474s.dts
new file mode 100644
index 000000000000..7c7ad5b8ad18
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020-j474s.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac mini (M2 Pro, 2023)
+ *
+ * target-type: J474s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6020.dtsi"
+
+/*
+ * This model is very similar to M1 and M2 Mac Studio models so base it on those
+ * and remove the missing SDHCI controller.
+ */
+
+#include "t602x-j474-j475.dtsi"
+
+/ {
+	compatible = "apple,j474s", "apple,t6020", "apple,arm-platform";
+	model = "Apple Mac mini (M2 Pro, 2023)";
+};
+
+/* PCIe devices */
+&wifi0 {
+	compatible = "pci14e4,4434";
+	brcm,board-type = "apple,tasmania";
+};
+
+&bluetooth0 {
+	compatible = "pci14e4,5f72";
+	brcm,board-type = "apple,tasmania";
+};
+
+/*
+ * port01 is unused, remove the PCIe sdhci0 node from t600x-j375.dtsi and adjust
+ * the iommu-map.
+ */
+/delete-node/ &sdhci0;
+
+&pcie0 {
+	iommu-map = <0x100 &pcie0_dart_0 1 1>,
+			<0x200 &pcie0_dart_2 1 1>,
+			<0x300 &pcie0_dart_3 1 1>;
+};
diff --git a/arch/arm64/boot/dts/apple/t6020.dtsi b/arch/arm64/boot/dts/apple/t6020.dtsi
new file mode 100644
index 000000000000..bffa66a3ffff
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6020 "M2 Pro" SoC
+ *
+ * Other names: H14J, "Rhodes Chop"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/* This chip is just a cut down version of t6021, so include it and disable the missing parts */
+
+#include "t6021.dtsi"
+
+/ {
+	compatible = "apple,t6020", "apple,arm-platform";
+};
+
+/delete-node/ &pmgr_south;
+
+&gpu {
+	compatible = "apple,agx-g14s";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021-j414c.dts b/arch/arm64/boot/dts/apple/t6021-j414c.dts
new file mode 100644
index 000000000000..cdcf0740714d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021-j414c.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M2 Max, 2023)
+ *
+ * target-type: J414c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6021.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+	compatible = "apple,j414c", "apple,t6021", "apple,arm-platform";
+	model = "Apple MacBook Pro (14-inch, M2 Max, 2023)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,tokara";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,tokara";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021-j416c.dts b/arch/arm64/boot/dts/apple/t6021-j416c.dts
new file mode 100644
index 000000000000..6d8146b94170
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021-j416c.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M2 Max, 2022)
+ *
+ * target-type: J416c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6021.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+	compatible = "apple,j416c", "apple,t6021", "apple,arm-platform";
+	model = "Apple MacBook Pro (16-inch, M2 Max, 2023)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,amami";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,amami";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021-j475c.dts b/arch/arm64/boot/dts/apple/t6021-j475c.dts
new file mode 100644
index 000000000000..533e35774874
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021-j475c.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M2 Max, 2023)
+ *
+ * target-type: J475c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6021.dtsi"
+#include "t602x-j474-j475.dtsi"
+
+/ {
+	compatible = "apple,j475c", "apple,t6021", "apple,arm-platform";
+	model = "Apple Mac Studio (M2 Max, 2023)";
+};
+
+&wifi0 {
+	compatible = "pci14e4,4434";
+	brcm,board-type = "apple,canary";
+};
+
+&bluetooth0 {
+	compatible = "pci14e4,5f72";
+	brcm,board-type = "apple,canary";
+};
+
+/* enable PCIe port01 with SDHCI */
+&port01 {
+	status = "okay";
+};
+
+&pcie0_dart_1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021.dtsi b/arch/arm64/boot/dts/apple/t6021.dtsi
new file mode 100644
index 000000000000..62907ad6a546
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6021 "M2 Max" SoC
+ *
+ * Other names: H14J, "Rhodes"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "multi-die-cpp.h"
+
+#include "t602x-common.dtsi"
+
+/ {
+	compatible = "apple,t6021", "apple,arm-platform";
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+};
+
+#define DIE
+#define DIE_NO 0
+
+&{/soc} {
+	#include "t602x-die0.dtsi"
+	#include "t602x-dieX.dtsi"
+	#include "t602x-nvme.dtsi"
+};
+
+#include "t602x-gpio-pins.dtsi"
+#include "t602x-pmgr.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+
+&aic {
+	affinities {
+		e-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_E>;
+			cpus = <&cpu_e00 &cpu_e01 &cpu_e02 &cpu_e03>;
+		};
+
+		p-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_P>;
+			cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+				&cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13>;
+		};
+	};
+};
+
+&gpu {
+	compatible = "apple,agx-g14c", "apple,agx-g14s";
+};
diff --git a/arch/arm64/boot/dts/apple/t6022-j180d.dts b/arch/arm64/boot/dts/apple/t6022-j180d.dts
new file mode 100644
index 000000000000..dca6bd167c22
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022-j180d.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Pro (M2 Ultra, 2023)
+ *
+ * target-type: J180d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6022.dtsi"
+#include "t6022-jxxxd.dtsi"
+
+/ {
+	compatible = "apple,j180d", "apple,t6022", "apple,arm-platform";
+	model = "Apple Mac Pro (M2 Ultra, 2023)";
+	aliases {
+		nvram = &nvram;
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+			power-domains = <&ps_dispext0_cpu0_die1>, <&ps_dptx_phy_ps_die1>;
+		};
+	};
+
+	memory@10000000000 {
+		device_type = "memory";
+		reg = <0x100 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+/* USB Type C Rear */
+&i2c0 {
+	hpm2: usb-pd@3b {
+		compatible = "apple,cd321x";
+		reg = <0x3b>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm3: usb-pd@3c {
+		compatible = "apple,cd321x";
+		reg = <0x3c>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	/* hpm4 and hpm5 included from t6022-jxxxd.dtsi */
+
+	hpm6: usb-pd@3d {
+		compatible = "apple,cd321x";
+		reg = <0x3d>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm7: usb-pd@3e {
+		compatible = "apple,cd321x";
+		reg = <0x3e>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+/* USB Type C Front */
+&i2c3 {
+	status = "okay";
+
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+/*
+ * Delete unused PCIe nodes, the Mac Pro uses slightly different PCIe
+ * controllers with a single port connected to a PM40100 PCIe switch
+ */
+/delete-node/ &pcie0;
+/delete-node/ &pcie0_dart_0;
+/delete-node/ &pcie0_dart_1;
+/delete-node/ &pcie0_dart_2;
+/delete-node/ &pcie0_dart_3;
+
+&nco_clkref {
+	clock-frequency = <1068000000>;
+};
+
+#include "spi1-nvram.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t6022-j475d.dts b/arch/arm64/boot/dts/apple/t6022-j475d.dts
new file mode 100644
index 000000000000..736594544f79
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022-j475d.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M2 Ultra, 2023)
+ *
+ * target-type: J475d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6022.dtsi"
+#include "t602x-j474-j475.dtsi"
+#include "t6022-jxxxd.dtsi"
+
+/ {
+	compatible = "apple,j475d", "apple,t6022", "apple,arm-platform";
+	model = "Apple Mac Studio (M2 Ultra, 2023)";
+};
+
+&framebuffer0 {
+	power-domains = <&ps_dispext0_cpu0_die1>, <&ps_dptx_phy_ps_die1>;
+};
+
+/* enable PCIe port01 with SDHCI */
+&port01 {
+	status = "okay";
+};
+
+&pcie0_dart_1 {
+	status = "okay";
+};
+
+&wifi0 {
+	compatible = "pci14e4,4434";
+	brcm,board-type = "apple,canary";
+};
+
+&bluetooth0 {
+	compatible = "pci14e4,5f72";
+	brcm,board-type = "apple,canary";
+};
diff --git a/arch/arm64/boot/dts/apple/t6022-jxxxd.dtsi b/arch/arm64/boot/dts/apple/t6022-jxxxd.dtsi
new file mode 100644
index 000000000000..4f7bf2ebfe39
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022-jxxxd.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Pro (M2 Ultra, 2023) and Mac Studio (M2 Ultra, 2023)
+ *
+ * This file contains the parts common to J180 and J475 devices with t6022.
+ *
+ * target-type: J180d / J475d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/* delete power-domains for missing disp0 / disp0_die1 */
+/delete-node/ &ps_disp0_cpu0;
+/delete-node/ &ps_disp0_fe;
+
+/delete-node/ &ps_disp0_cpu0_die1;
+/delete-node/ &ps_disp0_fe_die1;
+
+/* USB Type C */
+&i2c0 {
+	/* front-right */
+	hpm4: usb-pd@39 {
+		compatible = "apple,cd321x";
+		reg = <0x39>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	/* front-left */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t6022.dtsi b/arch/arm64/boot/dts/apple/t6022.dtsi
new file mode 100644
index 000000000000..e73bf2f7510a
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022.dtsi
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6022 "M2 Ultra" SoC
+ *
+ * Other names: H14J, "Rhodes 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "multi-die-cpp.h"
+
+#include "t602x-common.dtsi"
+
+/ {
+	compatible = "apple,t6022", "apple,arm-platform";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		cpu-map {
+			cluster3 {
+				core0 {
+					cpu = <&cpu_e10>;
+				};
+				core1 {
+					cpu = <&cpu_e11>;
+				};
+				core2 {
+					cpu = <&cpu_e12>;
+				};
+				core3 {
+					cpu = <&cpu_e13>;
+				};
+			};
+
+			cluster4 {
+				core0 {
+					cpu = <&cpu_p20>;
+				};
+				core1 {
+					cpu = <&cpu_p21>;
+				};
+				core2 {
+					cpu = <&cpu_p22>;
+				};
+				core3 {
+					cpu = <&cpu_p23>;
+				};
+			};
+
+			cluster5 {
+				core0 {
+					cpu = <&cpu_p30>;
+				};
+				core1 {
+					cpu = <&cpu_p31>;
+				};
+				core2 {
+					cpu = <&cpu_p32>;
+				};
+				core3 {
+					cpu = <&cpu_p33>;
+				};
+			};
+		};
+
+		cpu_e10: cpu@800 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x800>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size  = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_e11: cpu@801 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x801>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size  = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_e12: cpu@802 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x802>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size  = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_e13: cpu@803 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x803>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size  = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_p20: cpu@10900 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10900>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p21: cpu@10901 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10901>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p22: cpu@10902 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10902>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p23: cpu@10903 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10903>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p30: cpu@10a00 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10a00>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p31: cpu@10a01 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10a01>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p32: cpu@10a02 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10a02>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p33: cpu@10a03 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10a03>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		l2_cache_3: l2-cache-3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_4: l2-cache-4 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+
+		l2_cache_5: l2-cache-5 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+	};
+
+	die0: soc@200000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x02 0x00000000 0x02 0x00000000 0x4 0x00000000>,
+			 <0x05 0x80000000 0x05 0x80000000 0x1 0x80000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0xf 0x80000000>,
+			 <0x16 0x80000000 0x16 0x80000000 0x5 0x80000000>;
+		nonposted-mmio;
+		/* Required to get >32-bit DMA via DARTs */
+		dma-ranges = <0 0 0 0 0xffffffff 0xffffc000>;
+
+		// filled via templated includes at the end of the file
+	};
+
+	die1: soc@2200000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x02 0x00000000 0x22 0x00000000 0x4 0x00000000>,
+			 <0x07 0x00000000 0x27 0x00000000 0xf 0x80000000>,
+			 <0x16 0x80000000 0x36 0x80000000 0x5 0x80000000>;
+		nonposted-mmio;
+		/* Required to get >32-bit DMA via DARTs */
+		dma-ranges = <0 0 0 0 0xffffffff 0xffffc000>;
+
+		// filled via templated includes at the end of the file
+	};
+};
+
+#define DIE
+#define DIE_NO 0
+
+&die0 {
+	#include "t602x-die0.dtsi"
+	#include "t602x-dieX.dtsi"
+};
+
+#include "t602x-pmgr.dtsi"
+#include "t602x-gpio-pins.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+#define DIE _die1
+#define DIE_NO 1
+
+&die1 {
+	#include "t602x-dieX.dtsi"
+	#include "t602x-nvme.dtsi"
+};
+
+#include "t602x-pmgr.dtsi"
+
+/delete-node/ &ps_pmp_die1;
+
+#undef DIE
+#undef DIE_NO
+
+&aic {
+	affinities {
+		e-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_E>;
+			cpus = <&cpu_e00 &cpu_e01 &cpu_e02 &cpu_e03
+				&cpu_e10 &cpu_e11 &cpu_e12 &cpu_e13>;
+		};
+
+		p-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_P>;
+			cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+				&cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13
+				&cpu_p20 &cpu_p21 &cpu_p22 &cpu_p23
+				&cpu_p30 &cpu_p31 &cpu_p32 &cpu_p33>;
+		};
+	};
+};
+
+&ps_gfx {
+	// On t6022, the die0 GPU power domain needs both AFR power domains
+	power-domains = <&ps_afr>, <&ps_afr_die1>;
+};
+
+&gpu {
+	compatible = "apple,agx-g14d", "apple,agx-g14s";
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-common.dtsi b/arch/arm64/boot/dts/apple/t602x-common.dtsi
new file mode 100644
index 000000000000..9c800a391e7e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-common.dtsi
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Nodes common to all T602x family SoCs (M2 Pro/Max/Ultra)
+ *
+ * Other names: H14J, "Rhodes Chop", "Rhodes", "Rhodes 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		gpu = &gpu;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e00>;
+				};
+				core1 {
+					cpu = <&cpu_e01>;
+				};
+				core2 {
+					cpu = <&cpu_e02>;
+				};
+				core3 {
+					cpu = <&cpu_e03>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p00>;
+				};
+				core1 {
+					cpu = <&cpu_p01>;
+				};
+				core2 {
+					cpu = <&cpu_p02>;
+				};
+				core3 {
+					cpu = <&cpu_p03>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu_p10>;
+				};
+				core1 {
+					cpu = <&cpu_p11>;
+				};
+				core2 {
+					cpu = <&cpu_p12>;
+				};
+				core3 {
+					cpu = <&cpu_p13>;
+				};
+			};
+		};
+
+		cpu_e00: cpu@0 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_e01: cpu@1 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_e02: cpu@2 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_e03: cpu@3 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_p00: cpu@10100 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p01: cpu@10101 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p02: cpu@10102 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10102>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p03: cpu@10103 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10103>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p10: cpu@10200 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10200>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p11: cpu@10201 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10201>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p12: cpu@10202 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10202>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p13: cpu@10203 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10203>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+
+		l2_cache_2: l2-cache-2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+	 };
+
+	blizzard_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		/* pstate #1 is a dummy clone of #2 */
+		opp02 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-level = <2>;
+			clock-latency-ns = <7700>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1284000000>;
+			opp-level = <3>;
+			clock-latency-ns = <25000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1752000000>;
+			opp-level = <4>;
+			clock-latency-ns = <33000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2004000000>;
+			opp-level = <5>;
+			clock-latency-ns = <38000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <2256000000>;
+			opp-level = <6>;
+			clock-latency-ns = <44000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2424000000>;
+			opp-level = <7>;
+			clock-latency-ns = <48000>;
+		};
+	};
+
+	avalanche_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp01 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7400>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <948000000>;
+			opp-level = <2>;
+			clock-latency-ns = <18000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1188000000>;
+			opp-level = <3>;
+			clock-latency-ns = <21000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1452000000>;
+			opp-level = <4>;
+			clock-latency-ns = <24000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <5>;
+			clock-latency-ns = <28000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1968000000>;
+			opp-level = <6>;
+			clock-latency-ns = <31000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-level = <7>;
+			clock-latency-ns = <33000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-level = <8>;
+			clock-latency-ns = <45000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2568000000>;
+			opp-level = <9>;
+			clock-latency-ns = <47000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2724000000>;
+			opp-level = <10>;
+			clock-latency-ns = <50000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2868000000>;
+			opp-level = <11>;
+			clock-latency-ns = <52000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <3000000000>;
+			opp-level = <12>;
+			clock-latency-ns = <57000>;
+		};
+		opp13 {
+			opp-hz = /bits/ 64 <3132000000>;
+			opp-level = <13>;
+			clock-latency-ns = <60000>;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3264000000>;
+			opp-level = <14>;
+			clock-latency-ns = <64000>;
+		};
+		opp15 {
+			opp-hz = /bits/ 64 <3360000000>;
+			opp-level = <15>;
+			clock-latency-ns = <64000>;
+			turbo-mode;
+		};
+		opp16 {
+			opp-hz = /bits/ 64 <3408000000>;
+			opp-level = <16>;
+			clock-latency-ns = <64000>;
+			turbo-mode;
+		};
+		opp17 {
+			opp-hz = /bits/ 64 <3504000000>;
+			opp-level = <17>;
+			clock-latency-ns = <64000>;
+			turbo-mode;
+		};
+	};
+
+	pmu-e {
+		compatible = "apple,blizzard-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-p {
+		compatible = "apple,avalanche-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <AIC_FIQ 0 AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	clk_200m: clock-200m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "clk_200m";
+	};
+
+	/*
+	 * This is a fabulated representation of the input clock
+	 * to NCO since we don't know the true clock tree.
+	 */
+	nco_clkref: clock-ref-nco {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "nco_ref";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpu_globals: globals {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_a: hw-cal-a {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_b: hw-cal-b {
+			status = "disabled";
+		};
+
+		uat_handoff: uat-handoff {
+			status = "disabled";
+		};
+
+		uat_pagetables: uat-pagetables {
+			status = "disabled";
+		};
+
+		uat_ttbs: uat-ttbs {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-die0.dtsi b/arch/arm64/boot/dts/apple/t602x-die0.dtsi
new file mode 100644
index 000000000000..2e7d2bf08ddc
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-die0.dtsi
@@ -0,0 +1,575 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Devices used on die 0 on the Apple T6022 "M2 Ultra" SoC and present on
+ * Apple T6020 / T6021 "M2 Pro" / "M2 Max".
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	nco: clock-controller@28e03c000 {
+		compatible = "apple,t6020-nco", "apple,t8103-nco";
+		reg = <0x2 0x8e03c000 0x0 0x14000>;
+		clocks = <&nco_clkref>;
+		#clock-cells = <1>;
+	};
+
+	aic: interrupt-controller@28e100000 {
+		compatible = "apple,t6020-aic", "apple,aic2";
+		#interrupt-cells = <4>;
+		interrupt-controller;
+		reg = <0x2 0x8e100000 0x0 0xc000>,
+			<0x2 0x8e10c000 0x0 0x1000>;
+		reg-names = "core", "event";
+		power-domains = <&ps_aic>;
+	};
+
+	nub_spmi0: spmi@29e114000 {
+		compatible = "apple,t6020-spmi", "apple,t8103-spmi";
+		reg = <0x2 0x9e114000 0x0 0x100>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		pmic1: pmic@f {
+			compatible = "apple,maverick-pmic", "apple,spmi-nvmem";
+			reg = <0xb SPMI_USID>;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				pm_setting: pm-setting@1405 {
+					reg = <0x1405 0x1>;
+				};
+
+				rtc_offset: rtc-offset@1411 {
+					reg = <0x1411 0x6>;
+				};
+
+				boot_stage: boot-stage@6001 {
+					reg = <0x6001 0x1>;
+				};
+
+				boot_error_count: boot-error-count@6002,0 {
+					reg = <0x6002 0x1>;
+					bits = <0 4>;
+				};
+
+				panic_count: panic-count@6002,4 {
+					reg = <0x6002 0x1>;
+					bits = <4 4>;
+				};
+
+				boot_error_stage: boot-error-stage@6003 {
+					reg = <0x6003 0x1>;
+				};
+
+				shutdown_flag: shutdown-flag@600f,3 {
+					reg = <0x600f 0x1>;
+					bits = <3 1>;
+				};
+
+				fault_shadow: fault-shadow@867b {
+					reg = <0x867b 0x10>;
+				};
+
+				socd: socd@8b00 {
+					reg = <0x8b00 0x400>;
+				};
+			};
+		};
+	};
+
+	wdt: watchdog@29e2c4000 {
+		compatible = "apple,t6020-wdt", "apple,t8103-wdt";
+		reg = <0x2 0x9e2c4000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 719 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	smc_mbox: mbox@2a2408000 {
+		compatible = "apple,t6020-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x2 0xa2408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 862 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 863 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 864 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 865 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		#mbox-cells = <0>;
+	};
+
+	smc: smc@2a2400000 {
+		compatible = "apple,t6020-smc", "apple,t8103-smc";
+		reg = <0x2 0xa2400000 0x0 0x4000>,
+			<0x2 0xa3e00000 0x0 0x100000>;
+		reg-names = "smc", "sram";
+		mboxes = <&smc_mbox>;
+
+		smc_gpio: gpio {
+			compatible = "apple,smc-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		smc_reboot: reboot {
+			compatible = "apple,smc-reboot";
+			nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+				<&boot_error_count>, <&panic_count>;
+			nvmem-cell-names = "shutdown_flag", "boot_stage",
+				"boot_error_count", "panic_count";
+		};
+	};
+
+	pinctrl_smc: pinctrl@2a2820000 {
+		compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+		reg = <0x2 0xa2820000 0x0 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pinctrl_smc 0 0 30>;
+		apple,npins = <30>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 851 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 852 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 853 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 854 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 855 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 856 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 857 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	sio_dart: iommu@39b008000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x3 0x9b008000 0x0 0x8000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1231 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		power-domains = <&ps_sio_cpu>;
+	};
+
+	fpwm0: pwm@39b030000 {
+		compatible = "apple,t6020-fpwm", "apple,s5l-fpwm";
+		reg = <0x3 0x9b030000 0x0 0x4000>;
+		power-domains = <&ps_fpwm0>;
+		clocks = <&clkref>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@39b040000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b040000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1219 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c0_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c0>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+	};
+
+	i2c1: i2c@39b044000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b044000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1220 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c1_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c1>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@39b048000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b048000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1221 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c2_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c2>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@39b04c000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b04c000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1222 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c3_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c3>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@39b050000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b050000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1223 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c4_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c4>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@39b054000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1224 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c5_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c5>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@39b054000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1225 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c6_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c6>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@39b054000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1226 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c7_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c7>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@39b054000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1227 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c8_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c8>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	spi1: spi@39b104000 {
+		compatible = "apple,t6020-spi", "apple,t8103-spi";
+		reg = <0x3 0x9b104000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clk_200m>;
+		pinctrl-0 = <&spi1_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_spi1>;
+		status = "disabled";
+	};
+
+	spi2: spi@39b108000 {
+		compatible = "apple,t6020-spi", "apple,t8103-spi";
+		reg = <0x3 0x9b108000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1207 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkref>;
+		pinctrl-0 = <&spi2_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_spi2>;
+		status = "disabled";
+	};
+
+	spi4: spi@39b110000 {
+		compatible = "apple,t6020-spi", "apple,t8103-spi";
+		reg = <0x3 0x9b110000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1209 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkref>;
+		pinctrl-0 = <&spi4_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_spi4>;
+		status = "disabled";
+	};
+
+	serial0: serial@39b200000 {
+		compatible = "apple,s5l-uart";
+		reg = <0x3 0x9b200000 0x0 0x4000>;
+		reg-io-width = <4>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1198 IRQ_TYPE_LEVEL_HIGH>;
+		/*
+		 * TODO: figure out the clocking properly, there may
+		 * be a third selectable clock.
+		 */
+		clocks = <&clkref>, <&clkref>;
+		clock-names = "uart", "clk_uart_baud0";
+		power-domains = <&ps_uart0>;
+		status = "disabled";
+	};
+
+	admac: dma-controller@39b400000 {
+		compatible = "apple,t6020-admac", "apple,t8103-admac";
+		reg = <0x3 0x9b400000 0x0 0x34000>;
+		#dma-cells = <1>;
+		dma-channels = <16>;
+		interrupts-extended = <0>,
+				      <&aic AIC_IRQ 0 1218 IRQ_TYPE_LEVEL_HIGH>,
+				      <0>,
+				      <0>;
+		iommus = <&sio_dart 2>;
+		power-domains = <&ps_sio_adma>;
+		resets = <&ps_audio_p>;
+	};
+
+	mca: mca@39b600000 {
+		compatible = "apple,t6020-mca", "apple,t8103-mca";
+		reg = <0x3 0x9b600000 0x0 0x10000>,
+		      <0x3 0x9b500000 0x0 0x20000>;
+		clocks = <&nco 0>, <&nco 1>, <&nco 2>, <&nco 3>;
+		dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+		       <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+		       <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+		       <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>;
+		dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+			    "tx1a", "rx1a", "tx1b", "rx1b",
+			    "tx2a", "rx2a", "tx2b", "rx2b",
+			    "tx3a", "rx3a", "tx3b", "rx3b";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1211 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1212 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1213 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1214 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+				<&ps_mca2>, <&ps_mca3>;
+		resets = <&ps_audio_p>;
+		#sound-dai-cells = <1>;
+	};
+
+	gpu: gpu@406400000 {
+		compatible = "apple,agx-g14s";
+		reg = <0x4 0x6400000 0 0x40000>,
+			<0x4 0x4000000 0 0x1000000>;
+		reg-names = "asc", "sgx";
+		mboxes = <&agx_mbox>;
+		power-domains = <&ps_gfx>;
+		memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+				<&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+		memory-region-names = "ttbs", "pagetables", "handoff",
+				      "hw-cal-a", "hw-cal-b", "globals";
+
+		apple,firmware-abi = <0 0 0>;
+	};
+
+	agx_mbox: mbox@406408000 {
+		compatible = "apple,t6020-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x4 0x6408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1143 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1144 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1145 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		#mbox-cells = <0>;
+	};
+
+	pcie0: pcie@580000000 {
+		compatible = "apple,t6020-pcie";
+		device_type = "pci";
+
+		reg = <0x5 0x80000000 0x0 0x1000000>,	/* config */
+			<0x5 0x91000000 0x0 0x4000>,	/* rc */
+			<0x5 0x94008000 0x0 0x4000>,	/* port0 */
+			<0x5 0x95008000 0x0 0x4000>,	/* port1 */
+			<0x5 0x96008000 0x0 0x4000>,	/* port2 */
+			<0x5 0x97008000 0x0 0x4000>,	/* port3 */
+			<0x5 0x9e00c000 0x0 0x4000>,	/* phy0 */
+			<0x5 0x9e010000 0x0 0x4000>,	/* phy1 */
+			<0x5 0x9e014000 0x0 0x4000>,	/* phy2 */
+			<0x5 0x9e018000 0x0 0x4000>;	/* phy3 */
+		reg-names = "config", "rc",
+			"port0", "port1", "port2", "port3",
+			"phy0", "phy1", "phy2", "phy3";
+
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1340 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1344 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1348 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1352 IRQ_TYPE_LEVEL_HIGH>;
+
+		msi-controller;
+		msi-parent = <&pcie0>;
+		msi-ranges = <&aic AIC_IRQ 0 1672 IRQ_TYPE_EDGE_RISING 32>;
+
+		iommu-map = <0x100 &pcie0_dart_0 1 1>,
+				<0x200 &pcie0_dart_1 1 1>,
+				<0x300 &pcie0_dart_2 1 1>,
+				<0x400 &pcie0_dart_3 1 1>;
+		iommu-map-mask = <0xff00>;
+
+		bus-range = <0 4>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x43000000 0x5 0xa0000000 0x5 0xa0000000 0x0 0x20000000>,
+				<0x02000000 0x0 0xc0000000 0x5 0xc0000000 0x0 0x40000000>;
+
+		power-domains = <&ps_apcie_gp_sys>;
+		pinctrl-0 = <&pcie_pins>;
+		pinctrl-names = "default";
+
+		port00: pci@0,0 {
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 4 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port00 0 0 0 0>,
+					<0 0 0 2 &port00 0 0 0 1>,
+					<0 0 0 3 &port00 0 0 0 2>,
+					<0 0 0 4 &port00 0 0 0 3>;
+		};
+
+		port01: pci@1,0 {
+			device_type = "pci";
+			reg = <0x800 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 5 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port01 0 0 0 0>,
+					<0 0 0 2 &port01 0 0 0 1>,
+					<0 0 0 3 &port01 0 0 0 2>,
+					<0 0 0 4 &port01 0 0 0 3>;
+			status = "disabled";
+		};
+
+		port02: pci@2,0 {
+			device_type = "pci";
+			reg = <0x1000 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 6 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port02 0 0 0 0>,
+					<0 0 0 2 &port02 0 0 0 1>,
+					<0 0 0 3 &port02 0 0 0 2>,
+					<0 0 0 4 &port02 0 0 0 3>;
+			status = "disabled";
+		};
+
+		port03: pci@3,0 {
+			device_type = "pci";
+			reg = <0x1800 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 7 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port03 0 0 0 0>,
+					<0 0 0 2 &port03 0 0 0 1>,
+					<0 0 0 3 &port03 0 0 0 2>,
+					<0 0 0 4 &port03 0 0 0 3>;
+			status = "disabled";
+		};
+	};
+
+	pcie0_dart_0: iommu@594000000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x5 0x94000000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1341 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+	};
+
+	pcie0_dart_1: iommu@595000000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x5 0x95000000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1345 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
+	};
+
+	pcie0_dart_2: iommu@596000000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x5 0x96000000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1349 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
+	};
+
+	pcie0_dart_3: iommu@597000000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x5 0x97000000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1353 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
+	};
diff --git a/arch/arm64/boot/dts/apple/t602x-dieX.dtsi b/arch/arm64/boot/dts/apple/t602x-dieX.dtsi
new file mode 100644
index 000000000000..cb07fd82b32e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-dieX.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Nodes present on both dies of T6022 (M2 Ultra) and present on M2 Pro/Max.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	DIE_NODE(cpufreq_e): cpufreq@210e20000 {
+		compatible = "apple,t6020-cluster-cpufreq", "apple,t8112-cluster-cpufreq";
+		reg = <0x2 0x10e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(cpufreq_p0): cpufreq@211e20000 {
+		compatible = "apple,t6020-cluster-cpufreq", "apple,t8112-cluster-cpufreq";
+		reg = <0x2 0x11e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(cpufreq_p1): cpufreq@212e20000 {
+		compatible = "apple,t6020-cluster-cpufreq", "apple,t8112-cluster-cpufreq";
+		reg = <0x2 0x12e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(pmgr): power-management@28e080000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e080000 0 0x8000>;
+	};
+
+	DIE_NODE(pmgr_south): power-management@28e680000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e680000 0 0x8000>;
+	};
+
+	DIE_NODE(pmgr_east): power-management@290280000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x90280000 0 0xc000>;
+	};
+
+	DIE_NODE(pinctrl_nub): pinctrl@29e1f0000 {
+		compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+		reg = <0x2 0x9e1f0000 0x0 0x4000>;
+		power-domains = <&DIE_NODE(ps_nub_gpio)>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_nub) 0 0 30>;
+		apple,npins = <30>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 711 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 712 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 713 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 714 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 715 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 716 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 717 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	DIE_NODE(pmgr_mini): power-management@29e280000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x9e280000 0 0x4000>;
+	};
+
+	DIE_NODE(pinctrl_aop): pinctrl@2a6820000 {
+		compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+		reg = <0x2 0xa6820000 0x0 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_aop) 0 0 72>;
+		apple,npins = <72>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 598 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 599 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 600 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 601 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 602 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 603 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 604 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	DIE_NODE(pinctrl_ap): pinctrl@39b028000 {
+		compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+		reg = <0x3 0x9b028000 0x0 0x4000>;
+
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 458 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 459 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 460 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 461 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 462 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 463 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 464 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&clkref>;
+		power-domains = <&DIE_NODE(ps_gpio)>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_ap) 0 0 255>;
+		apple,npins = <255>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	DIE_NODE(pmgr_gfx): power-management@404e80000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		reg = <0x4 0x4e80000 0 0x4000>;
+	};
diff --git a/arch/arm64/boot/dts/apple/t602x-gpio-pins.dtsi b/arch/arm64/boot/dts/apple/t602x-gpio-pins.dtsi
new file mode 100644
index 000000000000..e41b6475f792
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-gpio-pins.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * GPIO pin mappings for Apple T602x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&pinctrl_ap {
+	i2c0_pins: i2c0-pins {
+		pinmux = <APPLE_PINMUX(63, 1)>,
+			<APPLE_PINMUX(64, 1)>;
+	};
+
+	i2c1_pins: i2c1-pins {
+		pinmux = <APPLE_PINMUX(65, 1)>,
+			<APPLE_PINMUX(66, 1)>;
+	};
+
+	i2c2_pins: i2c2-pins {
+		pinmux = <APPLE_PINMUX(67, 1)>,
+			<APPLE_PINMUX(68, 1)>;
+	};
+
+	i2c3_pins: i2c3-pins {
+		pinmux = <APPLE_PINMUX(69, 1)>,
+			<APPLE_PINMUX(70, 1)>;
+	};
+
+	i2c4_pins: i2c4-pins {
+		pinmux = <APPLE_PINMUX(71, 1)>,
+			<APPLE_PINMUX(72, 1)>;
+	};
+
+	i2c5_pins: i2c5-pins {
+		pinmux = <APPLE_PINMUX(73, 1)>,
+			<APPLE_PINMUX(74, 1)>;
+	};
+
+	i2c6_pins: i2c6-pins {
+		pinmux = <APPLE_PINMUX(75, 1)>,
+			<APPLE_PINMUX(76, 1)>;
+	};
+
+	i2c7_pins: i2c7-pins {
+		pinmux = <APPLE_PINMUX(77, 1)>,
+			<APPLE_PINMUX(78, 1)>;
+	};
+
+	i2c8_pins: i2c8-pins {
+		pinmux = <APPLE_PINMUX(79, 1)>,
+			<APPLE_PINMUX(80, 1)>;
+	};
+
+	spi1_pins: spi1-pins {
+		pinmux = <APPLE_PINMUX(155, 1)>, /* SDI */
+			<APPLE_PINMUX(156, 1)>,  /* SDO */
+			<APPLE_PINMUX(157, 1)>,  /* SCK */
+			<APPLE_PINMUX(158, 1)>;  /* CS */
+	};
+
+	spi2_pins: spi2-pins {
+		pinmux = <APPLE_PINMUX(159, 1)>, /* SDI */
+			<APPLE_PINMUX(160, 1)>,  /* SDO */
+			<APPLE_PINMUX(161, 1)>,  /* SCK */
+			<APPLE_PINMUX(162, 1)>;  /* CS */
+	};
+
+	spi4_pins: spi4-pins {
+		pinmux = <APPLE_PINMUX(167, 1)>, /* SDI */
+			<APPLE_PINMUX(168, 1)>,  /* SDO */
+			<APPLE_PINMUX(169, 1)>,  /* SCK */
+			<APPLE_PINMUX(170, 1)>;  /* CS */
+	};
+
+	pcie_pins: pcie-pins {
+		pinmux = <APPLE_PINMUX(0, 1)>,
+				<APPLE_PINMUX(1, 1)>,
+				<APPLE_PINMUX(2, 1)>,
+				<APPLE_PINMUX(3, 1)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-j414-j416.dtsi b/arch/arm64/boot/dts/apple/t602x-j414-j416.dtsi
new file mode 100644
index 000000000000..0e806d8ddf81
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-j414-j416.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14/16-inch, 2022)
+ *
+ * This file contains the parts common to J414 and J416 devices with both t6020 and t6021.
+ *
+ * target-type: J414s / J414c / J416s / J416c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/*
+ * These models are essentially identical to the previous generation, other than
+ * the GPIO indices.
+ */
+
+#include "t600x-j314-j316.dtsi"
+
+&framebuffer0 {
+	power-domains = <&ps_disp0_cpu0>, <&ps_dptx_phy_ps>;
+};
+
+&hpm0 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm1 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm2 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm5 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&wifi0 {
+	compatible = "pci14e4,4434";
+};
+
+&bluetooth0 {
+	compatible = "pci14e4,5f72";
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-j474-j475.dtsi b/arch/arm64/boot/dts/apple/t602x-j474-j475.dtsi
new file mode 100644
index 000000000000..ee12fea5b12c
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-j474-j475.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac mini (M2 Pro, 2023) and Mac Studio (2023)
+ *
+ * This file contains the parts common to J474 and J475 devices with t6020,
+ * t6021 and t6022.
+ *
+ * target-type: J474s / J475c / J475d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/*
+ * These models are very similar to the previous generation Mac Studio, other
+ * than GPIO indices.
+ */
+
+#include "t600x-j375.dtsi"
+
+&framebuffer0 {
+	power-domains = <&ps_dispext0_cpu0>, <&ps_dptx_phy_ps>;
+};
+
+&hpm0 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm1 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm2 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm3  {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-nvme.dtsi b/arch/arm64/boot/dts/apple/t602x-nvme.dtsi
new file mode 100644
index 000000000000..590cec8ac804
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-nvme.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * NVMe related devices for Apple T602x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	DIE_NODE(ans_mbox): mbox@347408000 {
+		compatible = "apple,t6020-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x3 0x47408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 1169 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1170 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1171 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1172 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		power-domains = <&DIE_NODE(ps_ans2)>;
+		#mbox-cells = <0>;
+	};
+
+	DIE_NODE(sart): sart@34bc50000 {
+		compatible = "apple,t6020-sart", "apple,t6000-sart";
+		reg = <0x3 0x4bc50000 0x0 0x10000>;
+		power-domains = <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(nvme): nvme@34bcc0000 {
+		compatible = "apple,t6020-nvme-ans2", "apple,t8103-nvme-ans2";
+		reg = <0x3 0x4bcc0000 0x0 0x40000>, <0x3 0x47400000 0x0 0x4000>;
+		reg-names = "nvme", "ans";
+		interrupt-parent = <&aic>;
+		/* The NVME interrupt is always routed to die 0 */
+		interrupts = <AIC_IRQ 0 1832 IRQ_TYPE_LEVEL_HIGH>;
+		mboxes = <&DIE_NODE(ans_mbox)>;
+		apple,sart = <&DIE_NODE(sart)>;
+		power-domains = <&DIE_NODE(ps_ans2)>,
+			<&DIE_NODE(ps_apcie_st_sys)>,
+			<&DIE_NODE(ps_apcie_st1_sys)>;
+		power-domain-names = "ans", "apcie0", "apcie1";
+		resets = <&DIE_NODE(ps_ans2)>;
+	};
diff --git a/arch/arm64/boot/dts/apple/t602x-pmgr.dtsi b/arch/arm64/boot/dts/apple/t602x-pmgr.dtsi
new file mode 100644
index 000000000000..f5382a2faf0b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-pmgr.dtsi
@@ -0,0 +1,2265 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for Apple T602x "M2 Pro/Max/Ultra" SoC
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&DIE_NODE(pmgr) {
+	DIE_NODE(ps_afi): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afi);
+		apple,always-on; /* Apple Fabric, CPU interface is here */
+	};
+
+	DIE_NODE(ps_aic): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(aic);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_dwi): power-controller@110 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dwi);
+	};
+
+	DIE_NODE(ps_pms): power-controller@118 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_gpio): power-controller@120 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gpio);
+		power-domains = <&DIE_NODE(ps_sio)>, <&DIE_NODE(ps_pms)>;
+	};
+
+	DIE_NODE(ps_soc_dpe): power-controller@128 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(soc_dpe);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_pms_c1ppt): power-controller@130 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_c1ppt);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_pmgr_soc_ocla): power-controller@138 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pmgr_soc_ocla);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_amcc0): power-controller@168 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc0);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc2): power-controller@170 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc2);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_00): power-controller@178 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_00);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_01): power-controller@180 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_01);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_02): power-controller@188 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_02);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_03): power-controller@190 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_03);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_08): power-controller@198 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_08);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_09): power-controller@1a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_09);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_10): power-controller@1a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_10);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_11): power-controller@1b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_11);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_afnc1_ioa): power-controller@1b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afc): power-controller@1d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afc);
+		apple,always-on; /* Apple Fabric, CPU interface is here */
+	};
+
+	DIE_NODE(ps_afnc0_ioa): power-controller@1e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc1_ls): power-controller@1f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc0_ls): power-controller@1f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc0_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw0): power-controller@200 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw1): power-controller@208 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw1);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw2): power-controller@210 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw2);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc0_lw0): power-controller@218 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc0_ls)>;
+	};
+
+	DIE_NODE(ps_scodec): power-controller@220 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(scodec);
+		power-domains = <&DIE_NODE(ps_afnc1_lw0)>;
+	};
+
+	DIE_NODE(ps_atc0_common): power-controller@228 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc1_common): power-controller@230 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc2_common): power-controller@238 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc3_common): power-controller@240 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_dispext1_sys): power-controller@248 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_sys);
+		power-domains = <&DIE_NODE(ps_afnc1_lw2)>;
+	};
+
+	DIE_NODE(ps_pms_bridge): power-controller@250 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_bridge);
+		apple,always-on; /* Core device */
+		power-domains = <&DIE_NODE(ps_afnc0_lw0)>;
+	};
+
+	DIE_NODE(ps_dispext0_sys): power-controller@258 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_sys);
+		power-domains = <&DIE_NODE(ps_afnc0_lw0)>, <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_ane_sys): power-controller@260 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_sys);
+		power-domains = <&DIE_NODE(ps_afnc0_lw0)>;
+	};
+
+	DIE_NODE(ps_avd_sys): power-controller@268 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(avd_sys);
+		power-domains = <&DIE_NODE(ps_afnc0_lw0)>;
+	};
+
+	DIE_NODE(ps_atc0_cio): power-controller@270 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc0_pcie): power-controller@278 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_pcie);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc1_cio): power-controller@280 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc1_pcie): power-controller@288 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_pcie);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc2_cio): power-controller@290 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc2_pcie): power-controller@298 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_pcie);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc3_cio): power-controller@2a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+	DIE_NODE(ps_atc3_pcie): power-controller@2a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_pcie);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+	DIE_NODE(ps_dispext1_fe): power-controller@2b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_fe);
+		power-domains = <&DIE_NODE(ps_dispext1_sys)>;
+	};
+
+	DIE_NODE(ps_dispext1_cpu0): power-controller@2b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext1_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_dispext0_fe): power-controller@2c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_fe);
+		power-domains = <&DIE_NODE(ps_dispext0_sys)>;
+	};
+
+	DIE_NODE(ps_pmp): power-controller@2c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pmp);
+	};
+
+	DIE_NODE(ps_pms_sram): power-controller@2d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_sram);
+	};
+
+	DIE_NODE(ps_dispext0_cpu0): power-controller@2d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext0_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_ane_cpu): power-controller@2e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_cpu);
+		power-domains = <&DIE_NODE(ps_ane_sys)>;
+	};
+
+	DIE_NODE(ps_atc0_cio_pcie): power-controller@2e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc0_cio)>;
+	};
+
+	DIE_NODE(ps_atc0_cio_usb): power-controller@2f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc0_cio)>;
+	};
+
+	DIE_NODE(ps_atc1_cio_pcie): power-controller@2f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc1_cio)>;
+	};
+
+	DIE_NODE(ps_atc1_cio_usb): power-controller@300 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc1_cio)>;
+	};
+
+	DIE_NODE(ps_atc2_cio_pcie): power-controller@308 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc2_cio)>;
+	};
+
+	DIE_NODE(ps_atc2_cio_usb): power-controller@310 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc2_cio)>;
+	};
+
+	DIE_NODE(ps_atc3_cio_pcie): power-controller@318 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc3_cio)>;
+	};
+
+	DIE_NODE(ps_atc3_cio_usb): power-controller@320 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc3_cio)>;
+	};
+
+	DIE_NODE(ps_trace_fab): power-controller@390 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(trace_fab);
+	};
+
+	DIE_NODE(ps_ane_sys_mpm): power-controller@4000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_sys_mpm);
+		power-domains = <&DIE_NODE(ps_ane_sys)>;
+	};
+
+	DIE_NODE(ps_ane_td): power-controller@4008 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_td);
+		power-domains = <&DIE_NODE(ps_ane_sys)>;
+	};
+
+	DIE_NODE(ps_ane_base): power-controller@4010 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_base);
+		power-domains = <&DIE_NODE(ps_ane_td)>;
+	};
+
+	DIE_NODE(ps_ane_set1): power-controller@4018 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_set1);
+		power-domains = <&DIE_NODE(ps_ane_base)>;
+	};
+
+	DIE_NODE(ps_ane_set2): power-controller@4020 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_set2);
+		power-domains = <&DIE_NODE(ps_ane_set1)>;
+	};
+
+	DIE_NODE(ps_ane_set3): power-controller@4028 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_set3);
+		power-domains = <&DIE_NODE(ps_ane_set2)>;
+	};
+
+	DIE_NODE(ps_ane_set4): power-controller@4030 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_set4);
+		power-domains = <&DIE_NODE(ps_ane_set3)>;
+	};
+};
+
+&DIE_NODE(pmgr_south) {
+	DIE_NODE(ps_amcc4): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc4);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_amcc5): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc5);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_amcc6): power-controller@110 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc6);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_amcc7): power-controller@118 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc7);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_dcs_16): power-controller@120 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_16);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_17): power-controller@128 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_17);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_18): power-controller@130 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_18);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_19): power-controller@138 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_19);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_20): power-controller@140 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_20);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_21): power-controller@148 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_21);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_22): power-controller@150 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_22);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_23): power-controller@158 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_23);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_24): power-controller@160 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_24);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_25): power-controller@168 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_25);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_26): power-controller@170 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_26);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_27): power-controller@178 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_27);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_28): power-controller@180 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_28);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_29): power-controller@188 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_29);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_30): power-controller@190 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_30);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_31): power-controller@198 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_31);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_afnc4_ioa): power-controller@1a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc4_ls): power-controller@1a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc4_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc4_lw0): power-controller@1b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc4_ls)>;
+	};
+
+	DIE_NODE(ps_afnc5_ioa): power-controller@1b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc5_ls): power-controller@1c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc5_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc5_lw0): power-controller@1c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc5_ls)>;
+	};
+
+	DIE_NODE(ps_dispext2_sys): power-controller@1d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_sys);
+	};
+
+	DIE_NODE(ps_msr1): power-controller@1d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr1);
+	};
+
+	DIE_NODE(ps_dispext2_fe): power-controller@1e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_fe);
+		power-domains = <&DIE_NODE(ps_dispext2_sys)>;
+	};
+
+	DIE_NODE(ps_dispext2_cpu0): power-controller@1e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext2_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_msr1_ase_core): power-controller@1f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr1_ase_core);
+		power-domains = <&DIE_NODE(ps_msr1)>;
+	};
+
+	DIE_NODE(ps_dispext3_sys): power-controller@220 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_sys);
+	};
+
+	DIE_NODE(ps_venc1_sys): power-controller@228 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_sys);
+	};
+
+	DIE_NODE(ps_dispext3_fe): power-controller@230 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_fe);
+		power-domains = <&DIE_NODE(ps_dispext3_sys)>;
+	};
+
+	DIE_NODE(ps_dispext3_cpu0): power-controller@238 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext3_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_venc1_dma): power-controller@4000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_dma);
+		power-domains = <&DIE_NODE(ps_venc1_sys)>;
+	};
+
+	DIE_NODE(ps_venc1_pipe4): power-controller@4008 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_pipe4);
+		power-domains = <&DIE_NODE(ps_venc1_dma)>;
+	};
+
+	DIE_NODE(ps_venc1_pipe5): power-controller@4010 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_pipe5);
+		power-domains = <&DIE_NODE(ps_venc1_dma)>;
+	};
+
+	DIE_NODE(ps_venc1_me0): power-controller@4018 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_me0);
+		power-domains = <&DIE_NODE(ps_venc1_pipe5)>, <&DIE_NODE(ps_venc1_pipe4)>;
+	};
+
+	DIE_NODE(ps_venc1_me1): power-controller@4020 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_me1);
+		power-domains = <&DIE_NODE(ps_venc1_me0)>;
+	};
+};
+
+&DIE_NODE(pmgr_east) {
+	DIE_NODE(ps_clvr_spmi0): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi0);
+		apple,always-on; /* PCPU voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi1): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi1);
+		apple,always-on; /* GPU voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi2): power-controller@110 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi2);
+		apple,always-on; /* ANE, fabric, AFR voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi3): power-controller@118 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi3);
+		apple,always-on; /* Additional voltage regulator, probably used on T6021 (SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi4): power-controller@120 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi4);
+		apple,always-on; /* Additional voltage regulator, probably used on T6021 (SMC) */
+	};
+
+	DIE_NODE(ps_ispsens0): power-controller@128 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens0);
+	};
+
+	DIE_NODE(ps_ispsens1): power-controller@130 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens1);
+	};
+
+	DIE_NODE(ps_ispsens2): power-controller@138 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens2);
+	};
+
+	DIE_NODE(ps_ispsens3): power-controller@140 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens3);
+	};
+
+	DIE_NODE(ps_afnc6_ioa): power-controller@148 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc6_ioa);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc6_ls): power-controller@150 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc6_ls);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc6_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc6_lw0): power-controller@158 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc6_lw0);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc6_ls)>;
+	};
+
+	DIE_NODE(ps_afnc2_ioa): power-controller@160 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_ioa);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_dcs_10)>;
+	};
+
+	DIE_NODE(ps_afnc2_ls): power-controller@168 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_ls);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc2_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc2_lw0): power-controller@170 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_lw0);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+	};
+
+	DIE_NODE(ps_afnc2_lw1): power-controller@178 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_lw1);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+	};
+
+	DIE_NODE(ps_afnc3_ioa): power-controller@180 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_ioa);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc3_ls): power-controller@188 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_ls);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc3_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc3_lw0): power-controller@190 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_lw0);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc3_ls)>;
+	};
+
+	DIE_NODE(ps_apcie_gp): power-controller@198 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gp);
+		power-domains = <&DIE_NODE(ps_afnc6_lw0)>;
+	};
+
+	DIE_NODE(ps_apcie_st): power-controller@1a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st);
+		power-domains = <&DIE_NODE(ps_afnc6_lw0)>;
+	};
+
+	DIE_NODE(ps_ans2): power-controller@1a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ans2);
+		power-domains = <&DIE_NODE(ps_afnc6_lw0)>;
+	};
+
+	DIE_NODE(ps_disp0_sys): power-controller@1b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_sys);
+		power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+	};
+
+	DIE_NODE(ps_jpg): power-controller@1b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(jpg);
+		power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+	};
+
+	DIE_NODE(ps_sio): power-controller@1c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_isp_sys): power-controller@1c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_sys);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+		status = "disabled";
+	};
+
+	DIE_NODE(ps_disp0_fe): power-controller@1d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_fe);
+		power-domains = <&DIE_NODE(ps_disp0_sys)>;
+	};
+
+	DIE_NODE(ps_disp0_cpu0): power-controller@1d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_cpu0);
+		power-domains = <&DIE_NODE(ps_disp0_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_sio_cpu): power-controller@1e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_cpu);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm0): power-controller@1e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm1): power-controller@1f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm2): power-controller@1f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c0): power-controller@200 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c1): power-controller@208 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c2): power-controller@210 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c3): power-controller@218 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c3);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c4): power-controller@220 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c4);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c5): power-controller@228 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c5);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c6): power-controller@230 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c6);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c7): power-controller@238 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c7);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c8): power-controller@240 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c8);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_spi_p): power-controller@248 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi0): power-controller@250 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi1): power-controller@258 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi2): power-controller@260 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_uart_p): power-controller@268 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_audio_p): power-controller@270 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(audio_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_adma): power-controller@278 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_adma);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_aes): power-controller@280 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(aes);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_dptx_phy_ps): power-controller@288 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dptx_phy_ps);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_spi0): power-controller@2d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi0);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi1): power-controller@2e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi1);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi2): power-controller@2e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi2);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi3): power-controller@2f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi3);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi4): power-controller@2f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi4);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi5): power-controller@300 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi5);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_uart_n): power-controller@308 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart_n);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart0): power-controller@310 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart0);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_amcc1): power-controller@318 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc1);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_amcc3): power-controller@320 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc3);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_dcs_04): power-controller@328 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_04);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_05): power-controller@330 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_05);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_06): power-controller@338 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_06);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_07): power-controller@340 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_07);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_12): power-controller@348 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_12);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_13): power-controller@350 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_13);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_14): power-controller@358 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_14);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_15): power-controller@360 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_15);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_uart1): power-controller@368 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart1);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart2): power-controller@370 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x370 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart2);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart3): power-controller@378 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart3);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart4): power-controller@380 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart4);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart5): power-controller@388 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart5);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart6): power-controller@390 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart6);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_mca0): power-controller@398 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x398 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca0);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca1): power-controller@3a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca1);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca2): power-controller@3a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca2);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca3): power-controller@3b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca3);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_dpa0): power-controller@3b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa0);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa1): power-controller@3c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa1);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa2): power-controller@3c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa2);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa3): power-controller@3d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa3);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_msr0): power-controller@3d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr0);
+	};
+
+	DIE_NODE(ps_venc_sys): power-controller@3e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_sys);
+	};
+
+	DIE_NODE(ps_dpa4): power-controller@3e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa4);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_msr0_ase_core): power-controller@3f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr0_ase_core);
+		power-domains = <&DIE_NODE(ps_msr0)>;
+	};
+
+	DIE_NODE(ps_apcie_gpshr_sys): power-controller@3f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gpshr_sys);
+		power-domains = <&DIE_NODE(ps_apcie_gp)>;
+	};
+
+	DIE_NODE(ps_apcie_st_sys): power-controller@408 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x408 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st_sys);
+		power-domains = <&DIE_NODE(ps_apcie_st)>, <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(ps_apcie_st1_sys): power-controller@410 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x410 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st1_sys);
+		power-domains = <&DIE_NODE(ps_apcie_st_sys)>;
+	};
+
+	DIE_NODE(ps_apcie_gp_sys): power-controller@418 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x418 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gp_sys);
+		power-domains = <&DIE_NODE(ps_apcie_gpshr_sys)>;
+		apple,always-on; /* Breaks things if shut down */
+	};
+
+	DIE_NODE(ps_apcie_ge_sys): power-controller@420 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x420 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_ge_sys);
+		power-domains = <&DIE_NODE(ps_apcie_gpshr_sys)>;
+	};
+
+	DIE_NODE(ps_apcie_phy_sw): power-controller@428 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x428 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_phy_sw);
+		apple,always-on; /* macOS does not turn this off */
+	};
+
+	DIE_NODE(ps_sep): power-controller@c00 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xc00 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sep);
+		apple,always-on; /* Locked on */
+	};
+
+	/* There is a dependency tree involved with these PDs,
+	 * but we do not express it here since the ISP driver
+	 * is supposed to sequence them in the right order anyway.
+	 *
+	 * This also works around spurious parent PD activation
+	 * on machines with ISP disabled (desktops), so we don't
+	 * have to enable/disable everything in the per-model DTs.
+	 */
+	DIE_NODE(ps_isp_cpu): power-controller@4000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_cpu);
+		/* power-domains = <&DIE_NODE(ps_isp_sys)>; */
+	};
+
+	DIE_NODE(ps_isp_fe): power-controller@4008 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_fe);
+		/* power-domains = <&DIE_NODE(ps_isp_sys)>; */
+	};
+
+	DIE_NODE(ps_dprx): power-controller@4010 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dprx);
+		/* power-domains = <&DIE_NODE(ps_isp_sys)>; */
+	};
+
+	DIE_NODE(ps_isp_vis): power-controller@4018 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_vis);
+		/* power-domains = <&DIE_NODE(ps_isp_fe)>; */
+	};
+
+	DIE_NODE(ps_isp_be): power-controller@4020 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_be);
+		/* power-domains = <&DIE_NODE(ps_isp_fe)>; */
+	};
+
+	DIE_NODE(ps_isp_raw): power-controller@4028 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_raw);
+		/* power-domains = <&DIE_NODE(ps_isp_fe)>; */
+	};
+
+	DIE_NODE(ps_isp_clr): power-controller@4030 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_clr);
+		/* power-domains = <&DIE_NODE(ps_isp_be)>; */
+	};
+
+	DIE_NODE(ps_venc_dma): power-controller@8000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_dma);
+		power-domains = <&DIE_NODE(ps_venc_sys)>;
+	};
+
+	DIE_NODE(ps_venc_pipe4): power-controller@8008 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_pipe4);
+		power-domains = <&DIE_NODE(ps_venc_dma)>;
+	};
+
+	DIE_NODE(ps_venc_pipe5): power-controller@8010 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_pipe5);
+		power-domains = <&DIE_NODE(ps_venc_dma)>;
+	};
+
+	DIE_NODE(ps_venc_me0): power-controller@8018 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_me0);
+		power-domains = <&DIE_NODE(ps_venc_pipe5)>, <&DIE_NODE(ps_venc_pipe4)>;
+	};
+
+	DIE_NODE(ps_venc_me1): power-controller@8020 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_me1);
+		power-domains = <&DIE_NODE(ps_venc_me0)>;
+	};
+
+	DIE_NODE(ps_prores): power-controller@c000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xc000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(prores);
+		power-domains = <&DIE_NODE(ps_afnc3_lw0)>;
+	};
+};
+
+&DIE_NODE(pmgr_mini) {
+	DIE_NODE(ps_debug): power-controller@58 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x58 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_spmi0): power-controller@60 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x60 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_spmi0);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_spmi1): power-controller@68 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x68 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_spmi1);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_aon): power-controller@70 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x70 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_aon);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_msg): power-controller@78 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x78 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msg);
+		apple,always-on; /* Core AON device? */
+	};
+
+	DIE_NODE(ps_nub_gpio): power-controller@80 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x80 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_gpio);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_fabric): power-controller@88 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x88 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_fabric);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_atc0_usb_aon): power-controller@90 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x90 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc1_usb_aon): power-controller@98 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x98 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc2_usb_aon): power-controller@a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xa0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc3_usb_aon): power-controller@a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xa8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_mtp_fabric): power-controller@b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xb0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_fabric);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_nub_fabric)>;
+		status = "disabled";
+	};
+
+	DIE_NODE(ps_nub_sram): power-controller@b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xb8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_sram);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_debug_switch): power-controller@c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xc0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug_switch);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_atc0_usb): power-controller@c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xc8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_usb);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc1_usb): power-controller@d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xd0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_usb);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc2_usb): power-controller@d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xd8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_usb);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc3_usb): power-controller@e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xe0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_usb);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+#if 0
+	/* MTP stuff is self-managed */
+	DIE_NODE(ps_mtp_gpio): power-controller@e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xe8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_gpio);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_base): power-controller@f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xf0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_base);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_periph): power-controller@f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xf8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_periph);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_spi0): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_spi0);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_i2cm0): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_i2cm0);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_uart0): power-controller@110 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_uart0);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_cpu): power-controller@118 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_cpu);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_scm_fabric): power-controller@120 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_scm_fabric);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_periph)>;
+	};
+
+	DIE_NODE(ps_mtp_sram): power-controller@128 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_sram);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_scm_fabric)>, <&DIE_NODE(ps_mtp_cpu)>;
+	};
+
+	DIE_NODE(ps_mtp_dma): power-controller@130 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_dma);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_sram)>;
+	};
+#endif
+};
+
+&DIE_NODE(pmgr_gfx) {
+	DIE_NODE(ps_gpx): power-controller@0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gpx);
+		apple,min-state = <4>;
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_afr): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afr);
+		/* Apple Fabric, media stuff: this can power down */
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_gfx): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gfx);
+		power-domains = <&DIE_NODE(ps_afr)>, <&DIE_NODE(ps_gpx)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-6.dtsi b/arch/arm64/boot/dts/apple/t7000-6.dtsi
new file mode 100644
index 000000000000..7048d7383982
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-6.dtsi
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6 / 6 Plus common device tree
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include <dt-bindings/input/input.h>
+#include "t7000.dtsi"
+#include "t7000-common.dtsi"
+#include "t7000-handheld.dtsi"
+
+/ {
+	chassis-type = "handset";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl 32 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl 33 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl 45 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl 46 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl 131 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_mipi_dsi>;
+};
+
+&typhoon_opp06 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-common.dtsi b/arch/arm64/boot/dts/apple/t7000-common.dtsi
new file mode 100644
index 000000000000..87146e6daae7
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-common.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple TV HD, iPhone 6, iPhone 6 Plus, iPad mini 4, iPod touch 6
+ *
+ * This file contains parts common to all Apple A8 devices.
+ *
+ * target-type: J42d, J96, J97, N56, N61, N102
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+		serial6 = &serial6;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-handheld.dtsi b/arch/arm64/boot/dts/apple/t7000-handheld.dtsi
new file mode 100644
index 000000000000..7b58aa648b53
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-handheld.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6, iPhone 6 Plus, iPad mini 4, iPod touch 6
+ *
+ * This file contains the parts common to handheld devices with t7000
+ *
+ * target-type: J96, J97, N56, N61, N102
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+};
+
+&dwi_bl {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-j42d.dts b/arch/arm64/boot/dts/apple/t7000-j42d.dts
new file mode 100644
index 000000000000..2ec9e06cc63f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-j42d.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple TV HD, J42d, AppleTV5,3 (A1625)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t7000.dtsi"
+#include "t7000-common.dtsi"
+
+/ {
+	compatible = "apple,j42d", "apple,t7000", "apple,arm-platform";
+	model = "Apple TV HD";
+	chassis-type = "television";
+
+	chosen {
+		stdout-path = "serial6";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0 &ps_dp>;
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+};
+
+&serial6 {
+	status = "okay";
+};
+
+&typhoon_opp06 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-j96.dts b/arch/arm64/boot/dts/apple/t7000-j96.dts
new file mode 100644
index 000000000000..8a32a50cc2df
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-j96.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 4 (Wi-Fi), J96, iPad5,1 (A1538)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t7000-mini4.dtsi"
+
+/ {
+	compatible = "apple,j96", "apple,t7000", "apple,arm-platform";
+	model = "Apple iPad mini 4 (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-j97.dts b/arch/arm64/boot/dts/apple/t7000-j97.dts
new file mode 100644
index 000000000000..ac7d501f88d2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-j97.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 4 (Cellular), J97, iPad5,2 (A1550)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t7000-mini4.dtsi"
+
+/ {
+	compatible = "apple,j97", "apple,t7000", "apple,arm-platform";
+	model = "Apple iPad mini 4 (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-mini4.dtsi b/arch/arm64/boot/dts/apple/t7000-mini4.dtsi
new file mode 100644
index 000000000000..cc235c5a0c43
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-mini4.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad mini 4 common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "t7000.dtsi"
+#include "t7000-common.dtsi"
+#include "t7000-handheld.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl 32 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl 33 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl 45 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl 46 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl 36 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_dp>;
+};
+
+&typhoon_opp06 {
+	status = "okay";
+};
+
+&typhoon_opp07 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-n102.dts b/arch/arm64/boot/dts/apple/t7000-n102.dts
new file mode 100644
index 000000000000..99eb8a2b8c73
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-n102.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPod touch 6, N102, iPod7,1 (A1574)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t7000.dtsi"
+#include "t7000-common.dtsi"
+#include "t7000-handheld.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "apple,n102", "apple,t7000", "apple,arm-platform";
+	model = "Apple iPod touch 6";
+	chassis-type = "handset";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl 32 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl 33 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl 46 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl 45 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_mipi_dsi>;
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-n56.dts b/arch/arm64/boot/dts/apple/t7000-n56.dts
new file mode 100644
index 000000000000..2c358df14458
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-n56.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6 Plus, N56, iPhone7,2 (A1549/A1586/A1589)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t7000-6.dtsi"
+
+/ {
+	compatible = "apple,n56", "apple,t7000", "apple,arm-platform";
+	model = "Apple iPhone 6 Plus";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-n61.dts b/arch/arm64/boot/dts/apple/t7000-n61.dts
new file mode 100644
index 000000000000..10b4ca8babf7
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-n61.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 6, N61, iPhone7,2 (A1549/A1586/A1589)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t7000-6.dtsi"
+
+/ {
+	compatible = "apple,n61", "apple,t7000", "apple,arm-platform";
+	model = "Apple iPhone 6";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-pmgr.dtsi b/arch/arm64/boot/dts/apple/t7000-pmgr.dtsi
new file mode 100644
index 000000000000..5948fa7afffc
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-pmgr.dtsi
@@ -0,0 +1,641 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T7000 "A8" SoC
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+&pmgr {
+	ps_cpu0: power-controller@20000 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@20008 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@20040 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_p: power-controller@201f8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+	};
+
+	ps_lio: power-controller@20100 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "lio";
+		apple,always-on; /* Core device */
+	};
+
+	ps_iomux: power-controller@20108 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "iomux";
+		apple,always-on; /* Core device */
+	};
+
+	ps_aic: power-controller@20110 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_debug: power-controller@20118 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_dwi: power-controller@20120 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@20128 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_mca0: power-controller@20130 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@20138 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@20140 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@20148 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@20150 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@20158 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@20160 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@20168 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@20170 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@20178 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@20180 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@20188 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@20190 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@20198 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@201a0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@201a8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@201b0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@201b8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@201c0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@201c8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@201d0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@201d8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@201e0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_aes0: power-controller@201e8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@201f0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb: power-controller@20248 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@20250 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@20258 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@20268 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host2: power-controller@20278 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host2";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_disp_busmux: power-controller@202a8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp_busmux";
+	};
+
+	ps_media: power-controller@202d8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp: power-controller@202d0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp";
+	};
+
+	ps_msr: power-controller@202e0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@202e8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0: power-controller@202b0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_disp1: power-controller@202c8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_pcie_ref: power-controller@20220 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_hsic0_phy: power-controller@20200 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_hsic1_phy: power-controller@20208 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic1_phy";
+		power-domains = <&ps_usb2host2>;
+	};
+
+	ps_ispsens0: power-controller@20210 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@20218 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_mcc: power-controller@20230 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_mcu: power-controller@20238 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcu";
+		apple,always-on; /* Core device */
+	};
+
+	ps_amp: power-controller@20240 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "amp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb2host0_ohci: power-controller@20260 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usbotg: power-controller@20288 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@20290 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple Fabric, critical block */
+	};
+
+	ps_sf: power-controller@20298 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple Fabric, critical block */
+	};
+
+	ps_cp: power-controller@202a0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_mipi_dsi: power-controller@202b8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_dp: power-controller@202c0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0>;
+	};
+
+	ps_vdec: power-controller@202f0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec";
+		power-domains = <&ps_media>;
+	};
+
+	ps_ans: power-controller@20318 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans";
+	};
+
+	ps_venc: power-controller@20300 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie: power-controller@20308 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_pcie_aux: power-controller@20310 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_gfx: power-controller@20320 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@20400 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_venc_pipe: power-controller@21000 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x21000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me0: power-controller@21008 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x21008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me1: power-controller@21010 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x21010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+		power-domains = <&ps_venc>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t7000.dtsi b/arch/arm64/boot/dts/apple/t7000.dtsi
new file mode 100644
index 000000000000..0342455d3444
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000.dtsi
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T7000 "A8" SoC
+ *
+ * Other names: H7P, "Fiji"
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ * Based on Asahi Linux's M1 (t8103.dtsi) and Corellium's A10 efforts.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,typhoon";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			performance-domains = <&cpufreq>;
+			operating-points-v2 = <&typhoon_opp>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,typhoon";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			performance-domains = <&cpufreq>;
+			operating-points-v2 = <&typhoon_opp>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+		};
+	};
+
+	typhoon_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <300>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <50000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <3>;
+			clock-latency-ns = <29000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <840000000>;
+			opp-level = <4>;
+			clock-latency-ns = <29000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-level = <5>;
+			clock-latency-ns = <36000>;
+		};
+		typhoon_opp06: opp06 {
+			opp-hz = /bits/ 64 <1392000000>;
+			opp-level = <6>;
+			clock-latency-ns = <42000>;
+			status = "disabled"; /* Not available on N102 */
+		};
+		typhoon_opp07: opp07 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-level = <7>;
+			clock-latency-ns = <49000>;
+			status = "disabled"; /* J96 and J97 only */
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,t7000-cluster-cpufreq", "apple,s5l8960x-cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a0c0000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0c0000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 158 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		serial6: serial@20a0d8000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0d8000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 164 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart6>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 174 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 175 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 176 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 177 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,t7000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x24000>;
+		};
+
+		wdt: watchdog@20e027000 {
+			compatible = "apple,t7000-wdt", "apple,wdt";
+			reg = <0x2 0x0e027000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,t7000-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		dwi_bl: backlight@20e200010 {
+			compatible = "apple,t7000-dwi-bl", "apple,dwi-bl";
+			reg = <0x2 0x0e200010 0x0 0x8>;
+			power-domains = <&ps_dwi>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@20e300000 {
+			compatible = "apple,t7000-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0e300000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 208>;
+			apple,npins = <208>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 68 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(97, 1)>,
+					 <APPLE_PINMUX(96, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(139, 1)>,
+					 <APPLE_PINMUX(138, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(65, 1)>,
+					 <APPLE_PINMUX(64, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(87, 1)>,
+					 <APPLE_PINMUX(86, 1)>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A8 doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "t7000-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t7001-air2.dtsi b/arch/arm64/boot/dts/apple/t7001-air2.dtsi
new file mode 100644
index 000000000000..e4ec8c1977de
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7001-air2.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air 2 common device tree
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "t7001.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0 &ps_dp>;
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl 92 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl 93 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t7001-j81.dts b/arch/arm64/boot/dts/apple/t7001-j81.dts
new file mode 100644
index 000000000000..ca90dc0c872c
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7001-j81.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air 2 (Wi-Fi), J81, iPad5,3 (A1566)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t7001-air2.dtsi"
+
+/ {
+	compatible = "apple,j81", "apple,t7001", "apple,arm-platform";
+	model = "Apple iPad Air 2 (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/t7001-j82.dts b/arch/arm64/boot/dts/apple/t7001-j82.dts
new file mode 100644
index 000000000000..d9fd16f48db7
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7001-j82.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air 2 (Cellular), J82, iPad5,4 (A1567)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t7001-air2.dtsi"
+
+/ {
+	compatible = "apple,j82", "apple,t7001", "apple,arm-platform";
+	model = "Apple iPad Air 2 (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/t7001-pmgr.dtsi b/arch/arm64/boot/dts/apple/t7001-pmgr.dtsi
new file mode 100644
index 000000000000..7321cfdcd189
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7001-pmgr.dtsi
@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T7001 "A8X" SoC
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@20000 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@20008 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu2: power-controller@20010 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu2";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@20040 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_p: power-controller@201f8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+	};
+
+	ps_lio: power-controller@20100 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "lio";
+		apple,always-on; /* Core device */
+	};
+
+	ps_iomux: power-controller@20108 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "iomux";
+		apple,always-on; /* Core device */
+	};
+
+	ps_aic: power-controller@20110 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_debug: power-controller@20118 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_dwi: power-controller@20120 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@20128 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_mca0: power-controller@20130 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@20138 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@20140 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@20148 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@20150 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@20158 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@20160 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@20168 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@20170 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@20178 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@20180 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@20188 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@20190 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@20198 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@201a0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@201a8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@201b0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@201b8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@201c0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@201c8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@201d0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@201d8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@201e0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_aes0: power-controller@201e8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@201f0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb: power-controller@20248 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@20250 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@20258 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@20268 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host2: power-controller@20278 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host2";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_disp_busmux: power-controller@202a8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp_busmux";
+	};
+
+	ps_disp1_busmux: power-controller@202c0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1_busmux";
+	};
+
+	ps_media: power-controller@202d8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp: power-controller@202d0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp";
+	};
+
+	ps_msr: power-controller@202e0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@202e8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0: power-controller@202b0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_disp1: power-controller@202c8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1";
+		power-domains = <&ps_disp1_busmux>;
+	};
+
+	ps_pcie_ref: power-controller@20220 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_hsic0_phy: power-controller@20200 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_hsic1_phy: power-controller@20208 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic1_phy";
+		power-domains = <&ps_usb2host2>;
+	};
+
+	ps_ispsens0: power-controller@20210 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@20218 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_mcc: power-controller@20230 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_mcu: power-controller@20238 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcu";
+		apple,always-on; /* Core device */
+	};
+
+	ps_amp: power-controller@20240 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "amp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb2host0_ohci: power-controller@20260 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usbotg: power-controller@20288 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@20290 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@20298 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_cp: power-controller@202a0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dp: power-controller@202b8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0>;
+	};
+
+	ps_vdec: power-controller@202f0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec";
+		power-domains = <&ps_media>;
+	};
+
+	ps_ans: power-controller@20318 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans";
+	};
+
+	ps_venc: power-controller@20300 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie: power-controller@20308 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_pcie_aux: power-controller@20310 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_gfx: power-controller@20320 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@20400 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_venc_pipe: power-controller@21000 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x21000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me0: power-controller@21008 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x21008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me1: power-controller@21010 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x21010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+		power-domains = <&ps_venc>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t7001.dtsi b/arch/arm64/boot/dts/apple/t7001.dtsi
new file mode 100644
index 000000000000..e1afb0542369
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7001.dtsi
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T7001 "A8X" SoC
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ * Based on Asahi Linux's M1 (t8103.dtsi) and Corellium's A10 efforts.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial0;
+	};
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,typhoon";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			performance-domains = <&cpufreq>;
+			operating-points-v2 = <&typhoon_opp>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,typhoon";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			performance-domains = <&cpufreq>;
+			operating-points-v2 = <&typhoon_opp>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "apple,typhoon";
+			reg = <0x0 0x2>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq>;
+			operating-points-v2 = <&typhoon_opp>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x200000>;
+		};
+	};
+
+	typhoon_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <300>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <49000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <3>;
+			clock-latency-ns = <31000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <840000000>;
+			opp-level = <4>;
+			clock-latency-ns = <32000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-level = <5>;
+			clock-latency-ns = <32000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1392000000>;
+			opp-level = <6>;
+			clock-latency-ns = <37000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-level = <7>;
+			clock-latency-ns = <41000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,t7000-cluster-cpufreq", "apple,s5l8960x-cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a0c0000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0c0000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 158 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 174 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 175 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 176 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 177 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,t7000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x24000>;
+		};
+
+		wdt: watchdog@20e027000 {
+			compatible = "apple,t7000-wdt", "apple,wdt";
+			reg = <0x2 0x0e027000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,t7000-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		pinctrl: pinctrl@20e300000 {
+			compatible = "apple,t7000-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0e300000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 184>;
+			apple,npins = <184>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 68 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(38, 1)>,
+					 <APPLE_PINMUX(37, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(66, 1)>,
+					 <APPLE_PINMUX(65, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(133, 1)>,
+					 <APPLE_PINMUX(132, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(135, 1)>,
+					 <APPLE_PINMUX(134, 1)>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A8X doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "t7001-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8010-7.dtsi b/arch/arm64/boot/dts/apple/t8010-7.dtsi
new file mode 100644
index 000000000000..1913b7b2c1fe
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-7.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 7 / 7 Plus common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "t8010.dtsi"
+#include "t8010-common.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "handset";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl_ap 179 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl_ap 180 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl_ap 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		switch-mute {
+			label = "Mute Switch";
+			gpios = <&pinctrl_ap 86 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MUTE>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0_fe &ps_disp0_be &ps_mipi_dsi>;
+};
+
+&hurricane_opp09 {
+	status = "okay";
+};
+
+&hurricane_opp10 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-common.dtsi b/arch/arm64/boot/dts/apple/t8010-common.dtsi
new file mode 100644
index 000000000000..44dc968638b1
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-common.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Apple iPhone 7, iPhone 7 Plus, iPad 6, iPad 7, iPod touch 7
+ *
+ * This file contains parts common to all Apple A10 devices.
+ *
+ * target-type: D10, D11, D101, D111, J71b, J72b, J171, J172, N112
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&dwi_bl {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-d10.dts b/arch/arm64/boot/dts/apple/t8010-d10.dts
new file mode 100644
index 000000000000..39cdd12db6bf
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-d10.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 7 (Qualcomm), D10, iPhone9,1 (A1660/A1778/A1779/A1780)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8010-7.dtsi"
+
+/ {
+	compatible = "apple,d10", "apple,t8010", "apple,arm-platform";
+	model = "Apple iPhone 7 (Qualcomm)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-d101.dts b/arch/arm64/boot/dts/apple/t8010-d101.dts
new file mode 100644
index 000000000000..6a9f0856f930
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-d101.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 7 (Intel), D101, iPhone9,3 (A1660/A1778/A1779/A1780)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8010-7.dtsi"
+
+/ {
+	compatible = "apple,d101", "apple,t8010", "apple,arm-platform";
+	model = "Apple iPhone 7 (Intel)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-d11.dts b/arch/arm64/boot/dts/apple/t8010-d11.dts
new file mode 100644
index 000000000000..57e41c2cfbe2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-d11.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 7 Plus (Qualcomm), D11, iPhone9,2 (A1661/A1784/A1785/A1786)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8010-7.dtsi"
+
+/ {
+	compatible = "apple,d11", "apple,t8010", "apple,arm-platform";
+	model = "Apple iPhone 7 Plus (Qualcomm)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-d111.dts b/arch/arm64/boot/dts/apple/t8010-d111.dts
new file mode 100644
index 000000000000..37e395a48c1d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-d111.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 7 Plus (Intel), D111, iPhone9,4 (A1661/A1784/A1785/A1786)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8010-7.dtsi"
+
+/ {
+	compatible = "apple,d111", "apple,t8010", "apple,arm-platform";
+	model = "Apple iPhone 7 Plus (Intel)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-ipad6.dtsi b/arch/arm64/boot/dts/apple/t8010-ipad6.dtsi
new file mode 100644
index 000000000000..1e46e4a3a7f4
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-ipad6.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 6 common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "t8010.dtsi"
+#include "t8010-common.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl_ap 180 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl_ap 179 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl_ap 89 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl_ap 90 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0_fe &ps_disp0_be &ps_dp>;
+};
+
+&hurricane_opp09 {
+	status = "okay";
+};
+
+&hurricane_opp10 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-ipad7.dtsi b/arch/arm64/boot/dts/apple/t8010-ipad7.dtsi
new file mode 100644
index 000000000000..bd0e9c0b5696
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-ipad7.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 7 common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/*
+ * The iPad 7 seems to be only an iteration over the iPad 6 with some
+ * small changes, like the a bigger screen and 1 GiB of RAM more, hence
+ * there is little to no differentiation between these 2 generations for
+ * now.
+ */
+#include "t8010-ipad6.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8010-j171.dts b/arch/arm64/boot/dts/apple/t8010-j171.dts
new file mode 100644
index 000000000000..6751bf3a4afd
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-j171.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 7 (Wi-Fi), J171, iPad7,11 (A2197)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8010-ipad7.dtsi"
+
+/ {
+	compatible = "apple,j171", "apple,t8010", "apple,arm-platform";
+	model = "Apple iPad 7 (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-j172.dts b/arch/arm64/boot/dts/apple/t8010-j172.dts
new file mode 100644
index 000000000000..51aaa950acd9
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-j172.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 7 (Cellular), J172, iPad7,12 (A2198/A2200)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8010-ipad7.dtsi"
+
+/ {
+	compatible = "apple,j172", "apple,t8010", "apple,arm-platform";
+	model = "Apple iPad 7 (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-j71b.dts b/arch/arm64/boot/dts/apple/t8010-j71b.dts
new file mode 100644
index 000000000000..534eb8413e08
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-j71b.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 6 (Wi-Fi), J71b, iPad7,5 (A1893)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8010-ipad6.dtsi"
+
+/ {
+	compatible = "apple,j71b", "apple,t8010", "apple,arm-platform";
+	model = "Apple iPad 6 (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-j72b.dts b/arch/arm64/boot/dts/apple/t8010-j72b.dts
new file mode 100644
index 000000000000..264924e41f42
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-j72b.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad 6 (Cellular), J72b, iPad7,6 (A1954)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8010-ipad6.dtsi"
+
+/ {
+	compatible = "apple,j72b", "apple,t8010", "apple,arm-platform";
+	model = "Apple iPad 6 (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-n112.dts b/arch/arm64/boot/dts/apple/t8010-n112.dts
new file mode 100644
index 000000000000..48fdbedf74da
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-n112.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPod touch 7, N112, iPod9,1 (A2178)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8010.dtsi"
+#include "t8010-common.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "apple,n112", "apple,t8010", "apple,arm-platform";
+	model = "Apple iPod touch 7";
+	chassis-type = "handset";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl_ap 86 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl_ap 179 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl_ap 180 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl_ap 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0_fe &ps_disp0_be &ps_mipi_dsi>;
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8010-pmgr.dtsi
new file mode 100644
index 000000000000..6d451088616a
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-pmgr.dtsi
@@ -0,0 +1,772 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8010 "A10" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80160 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80168 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@80110 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@80118 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms: power-controller@80120 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pcie_ref: power-controller@80148 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_socuvd: power-controller@80150 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "socuvd";
+	};
+
+	ps_mca0: power-controller@80178 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80180 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80188 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80190 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80198 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@801a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@801a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@801b0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801b8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801c0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801c8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801d0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801d8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801e0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@801e8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@801f0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@801f8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80170 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsic0_phy: power-controller@80128 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_isp_sens0: power-controller@80130 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens0";
+	};
+
+	ps_isp_sens1: power-controller@80138 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens1";
+	};
+
+	ps_isp_sens2: power-controller@80140 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens2";
+	};
+
+	ps_usb: power-controller@80268 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@80270 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@80278 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@80288 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_rtmux: power-controller@802a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rtmux";
+	};
+
+	ps_media: power-controller@802d8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp_sys: power-controller@802d0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_msr: power-controller@802e8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@802e0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0_fe: power-controller@802b0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_disp0_be: power-controller@802b8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_be";
+		power-domains = <&ps_disp0_fe>;
+	};
+
+	ps_pmp: power-controller@802f0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@802f8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_uart3: power-controller@80200 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@80208 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@80210 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@80218 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@80220 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@80228 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_hfd0: power-controller@80238 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hfd0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80240 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80248 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@80250 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@80258 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@80260 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_usb2host0_ohci: power-controller@80280 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usbotg: power-controller@80290 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@80298 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_mipi_dsi: power-controller@802c0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_disp0_be>;
+	};
+
+	ps_dp: power-controller@802c8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0_be>;
+	};
+
+	ps_venc_sys: power-controller@80310 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie: power-controller@80318 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_pcie_aux: power-controller@80320 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_vdec0: power-controller@80300 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec0";
+		power-domains = <&ps_media>;
+	};
+
+	ps_gfx: power-controller@80328 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_isp_rsts0: power-controller@84000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts0";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_rsts1: power-controller@84008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts1";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_vis: power-controller@84010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_vis";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_be: power-controller@84018 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_be";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_pearl: power-controller@84020 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_pearl";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_dprx: power-controller@84028 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dprx";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_venc_pipe4: power-controller@88000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_pipe5: power-controller@88008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_me0: power-controller@88010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88018 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_aop: power-controller@80000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop";
+		power-domains = <&ps_aop_cpu &ps_aop_busif &ps_aop_filter>;
+		apple,always-on; /* Always on processor */
+	};
+
+	ps_debug: power-controller@80008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_aop_gpio: power-controller@80010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_gpio";
+	};
+
+	ps_aop_cpu: power-controller@80048 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80048 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_cpu";
+	};
+
+	ps_aop_filter: power-controller@80050 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_filter";
+	};
+
+	ps_aop_busif: power-controller@80058 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80058 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_busif";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8010.dtsi b/arch/arm64/boot/dts/apple/t8010.dtsi
new file mode 100644
index 000000000000..522b3896aa87
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010.dtsi
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Apple T8010 "A10" SoC
+ *
+ * Other names: H9P, "Cayman"
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,hurricane-zephyr";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,hurricane-zephyr";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x300000>; /* P-cluster */
+		};
+	};
+
+	fusion_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		/*
+		 * Apple Fusion Architecture: Hardware big.LITTLE switcher
+		 * that use p-state transitions to switch between cores.
+		 * Only one type of core can be active at a given time.
+		 *
+		 * The E-core frequencies are adjusted so performance scales
+		 * linearly with reported clock speed.
+		 */
+
+		opp01 {
+			opp-hz = /bits/ 64 <172000000>; /* 300 MHz, E-core */
+			opp-level = <1>;
+			clock-latency-ns = <11000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <230000000>; /* 396 MHz, E-core */
+			opp-level = <2>;
+			clock-latency-ns = <49000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <425000000>; /* 732 MHz, E-core */
+			opp-level = <3>;
+			clock-latency-ns = <13000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <637000000>; /* 1092 MHz, E-core */
+			opp-level = <4>;
+			clock-latency-ns = <18000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <756000000>;
+			opp-level = <5>;
+			clock-latency-ns = <35000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-level = <6>;
+			clock-latency-ns = <31000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1356000000>;
+			opp-level = <7>;
+			clock-latency-ns = <37000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <1644000000>;
+			opp-level = <8>;
+			clock-latency-ns = <39500>;
+		};
+		hurricane_opp09: opp09 {
+			opp-hz = /bits/ 64 <1944000000>;
+			opp-level = <9>;
+			clock-latency-ns = <46000>;
+			status = "disabled"; /* Not available on N112 */
+		};
+		hurricane_opp10: opp10 {
+			opp-hz = /bits/ 64 <2244000000>;
+			opp-level = <10>;
+			clock-latency-ns = <56000>;
+			status = "disabled"; /* Not available on N112 */
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		hurricane_opp11: opp11 {
+			opp-hz = /bits/ 64 <2340000000>;
+			opp-level = <11>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+			status = "disabled"; /* Not available on N112 */
+		};
+#endif
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202f20000 {
+			compatible = "apple,t8010-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x02f20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a0c0000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0c0000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 218 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 232 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 233 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 234 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 235 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x8c000>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,t8010-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		dwi_bl: backlight@20e200080 {
+			compatible = "apple,t8010-dwi-bl", "apple,dwi-bl";
+			reg = <0x2 0x0e200080 0x0 0x8>;
+			power-domains = <&ps_dwi>;
+			status = "disabled";
+		};
+
+		pinctrl_ap: pinctrl@20f100000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0f100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 208>;
+			apple,npins = <208>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(197, 1)>,
+					 <APPLE_PINMUX(196, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(40, 1)>,
+					 <APPLE_PINMUX(39, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(132, 1)>,
+					 <APPLE_PINMUX(133, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(41, 1)>,
+					 <APPLE_PINMUX(42, 1)>;
+			};
+		};
+
+		pinctrl_aop: pinctrl@2100f0000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x100f0000 0x0 0x100000>;
+			power-domains = <&ps_aop_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 42>;
+			apple,npins = <42>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 134 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@210200000 {
+			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x10200000 0 0x84000>;
+		};
+
+		wdt: watchdog@2102b0000 {
+			compatible = "apple,t8010-wdt", "apple,wdt";
+			reg = <0x2 0x102b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A10 doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "t8010-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8011-common.dtsi b/arch/arm64/boot/dts/apple/t8011-common.dtsi
new file mode 100644
index 000000000000..2010b56246f1
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011-common.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple TV 4K, Apple iPad Pro 2
+ *
+ * This file contains parts common to all Apple A10X devices.
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0_fe &ps_disp0_be &ps_dp>;
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8011-j105a.dts b/arch/arm64/boot/dts/apple/t8011-j105a.dts
new file mode 100644
index 000000000000..d3e5b69c67aa
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011-j105a.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple TV 4K (1st Generation), J105a, AppleTV6,2 (A1482)
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8011.dtsi"
+#include "t8011-common.dtsi"
+
+/ {
+	compatible = "apple,j105a", "apple,t8011", "apple,arm-platform";
+	model = "Apple TV 4K (1st Generation)";
+	chassis-type = "television";
+};
diff --git a/arch/arm64/boot/dts/apple/t8011-j120.dts b/arch/arm64/boot/dts/apple/t8011-j120.dts
new file mode 100644
index 000000000000..1b49bb5c97c3
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011-j120.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro 2 (12.9-inch) (Wi-Fi), J120, iPad7,1 (A1670)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8011.dtsi"
+#include "t8011-common.dtsi"
+#include "t8011-pro2.dtsi"
+
+/ {
+	compatible = "apple,j120", "apple,t8011", "apple,arm-platform";
+	model = "Apple iPad Pro 2 (12.9-inch) (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8011-j121.dts b/arch/arm64/boot/dts/apple/t8011-j121.dts
new file mode 100644
index 000000000000..22f4aa1ecbda
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011-j121.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro 2 (12.9-inch) (Cellular), J121, iPad7,2 (A1671)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8011.dtsi"
+#include "t8011-common.dtsi"
+#include "t8011-pro2.dtsi"
+
+/ {
+	compatible = "apple,j121", "apple,t8011", "apple,arm-platform";
+	model = "Apple iPad Pro 2 (12.9-inch) (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8011-j207.dts b/arch/arm64/boot/dts/apple/t8011-j207.dts
new file mode 100644
index 000000000000..c3384e2cad44
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011-j207.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro 2 (10.5-inch) (Wi-Fi), J207, iPad7,3 (A1701)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8011.dtsi"
+#include "t8011-common.dtsi"
+#include "t8011-pro2.dtsi"
+
+/ {
+	compatible = "apple,j207", "apple,t8011", "apple,arm-platform";
+	model = "Apple iPad Pro 2 (10.5-inch) (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8011-j208.dts b/arch/arm64/boot/dts/apple/t8011-j208.dts
new file mode 100644
index 000000000000..251fa76efb6b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011-j208.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro 2 (10.5-inch) (Cellular), J208, iPad7,4 (A1709)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8011.dtsi"
+#include "t8011-common.dtsi"
+#include "t8011-pro2.dtsi"
+
+/ {
+	compatible = "apple,j208", "apple,t8011", "apple,arm-platform";
+	model = "Apple iPad Pro 2 (10.5-inch) (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8011-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8011-pmgr.dtsi
new file mode 100644
index 000000000000..c44e3f9d7087
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011-pmgr.dtsi
@@ -0,0 +1,806 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8011 "A10X" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu2: power-controller@80010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu2";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80158 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80160 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@80110 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@80118 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms: power-controller@80120 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pcie_ref: power-controller@80148 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_mca0: power-controller@80170 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80178 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80180 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80188 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80190 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@80198 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@801a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@801a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801b0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801b8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801c0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801c8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801d0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801d8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@801e0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@801e8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@801f0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@801f8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80168 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsic0_phy: power-controller@80128 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb3host>;
+	};
+
+	ps_isp_sens0: power-controller@80130 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens0";
+	};
+
+	ps_isp_sens1: power-controller@80138 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens1";
+	};
+
+	ps_isp_sens2: power-controller@80140 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens2";
+	};
+
+	ps_usb: power-controller@80288 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@80290 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host: power-controller@80298 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2dev: power-controller@802a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2dev";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb3host: power-controller@802a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb3host";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb3dev: power-controller@802b0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb3dev";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_media: power-controller@802e8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp_sys: power-controller@802e0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+	};
+
+	ps_msr: power-controller@802f8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@802f0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0_fe: power-controller@802c8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+	};
+
+	ps_disp0_be: power-controller@802d0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_be";
+		power-domains = <&ps_disp0_fe>;
+	};
+
+	ps_dpa: power-controller@80230 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@80200 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@80208 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@80210 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@80218 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@80220 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_hfd0: power-controller@80238 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hfd0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80240 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80248 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@80250 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@80258 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@80260 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs4: power-controller@80268 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs4";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs5: power-controller@80270 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs5";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs6: power-controller@80278 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs6";
+	};
+
+	ps_dcs7: power-controller@80280 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs7";
+	};
+
+	ps_smx: power-controller@802b8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802c0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_dp: power-controller@802d8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0_be>;
+	};
+
+	ps_venc_sys: power-controller@80320 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_media>;
+	};
+
+	ps_srs: power-controller@80390 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "srs";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pms_sram: power-controller@80308 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_pmp: power-controller@80300 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pcie: power-controller@80328 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_pcie_aux: power-controller@80330 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_vdec0: power-controller@80310 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec0";
+		power-domains = <&ps_media>;
+	};
+
+	ps_gfx: power-controller@80338 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_isp_rsts0: power-controller@84000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts0";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_rsts1: power-controller@84008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts1";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_vis: power-controller@84010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_vis";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_be: power-controller@84018 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_be";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_pearl: power-controller@84020 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_pearl";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_dprx: power-controller@84028 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dprx";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_venc_pipe4: power-controller@88000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_pipe5: power-controller@88008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_me0: power-controller@88010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88018 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_aop: power-controller@80000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop";
+		power-domains = <&ps_aop_cpu &ps_aop_filter &ps_aop_busif>;
+		apple,always-on; /* Always on processor */
+	};
+
+	ps_debug: power-controller@80008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_aop_gpio: power-controller@80010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_gpio";
+	};
+
+	ps_aop_cpu: power-controller@80048 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80048 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_cpu";
+	};
+
+	ps_aop_filter: power-controller@80050 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_filter";
+	};
+
+	ps_aop_busif: power-controller@80058 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80058 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_busif";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8011-pro2.dtsi b/arch/arm64/boot/dts/apple/t8011-pro2.dtsi
new file mode 100644
index 000000000000..5eaa0a73350f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011-pro2.dtsi
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro 2 common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	chassis-type = "tablet";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home Button";
+			gpios = <&pinctrl_ap 139 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "Power Button";
+			gpios = <&pinctrl_ap 138 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-voldown {
+			label = "Volume Down";
+			gpios = <&pinctrl_ap 43 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			label = "Volume Up";
+			gpios = <&pinctrl_ap 40 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&ps_dcs6 {
+	apple,always-on; /* LPDDR4 interface */
+};
+
+&ps_dcs7 {
+	apple,always-on; /* LPDDR4 interface */
+};
diff --git a/arch/arm64/boot/dts/apple/t8011.dtsi b/arch/arm64/boot/dts/apple/t8011.dtsi
new file mode 100644
index 000000000000..039aa4d1e887
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011.dtsi
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T8011 "A10X" SoC
+ *
+ * Other names: H9G, "Myst"
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,hurricane-zephyr";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,hurricane-zephyr";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		cpu2: cpu@2 {
+			compatible = "apple,hurricane-zephyr";
+			reg = <0x0 0x2>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x800000>; /* P-cluster */
+		};
+	};
+
+	fusion_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		/*
+		 * Apple Fusion Architecture: Hardwired big.LITTLE switcher
+		 * that use p-state transitions to switch between cores.
+		 *
+		 * The E-core frequencies are adjusted so performance scales
+		 * linearly with reported clock speed.
+		 */
+
+		opp01 {
+			opp-hz = /bits/ 64 <172000000>; /* 300 MHz, E-core */
+			opp-level = <1>;
+			clock-latency-ns = <12000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <230000000>; /* 396 MHz, E-core */
+			opp-level = <2>;
+			clock-latency-ns = <135000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <448000000>; /* 768 MHz, E-core */
+			opp-level = <3>;
+			clock-latency-ns = <105000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <662000000>; /* 1152 MHz, E-core */
+			opp-level = <4>;
+			clock-latency-ns = <115000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <804000000>;
+			opp-level = <5>;
+			clock-latency-ns = <122000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1140000000>;
+			opp-level = <6>;
+			clock-latency-ns = <120000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1548000000>;
+			opp-level = <7>;
+			clock-latency-ns = <125000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <1956000000>;
+			opp-level = <8>;
+			clock-latency-ns = <135000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2316000000>;
+			opp-level = <9>;
+			clock-latency-ns = <140000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp10 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-level = <10>;
+			clock-latency-ns = <140000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202f20000 {
+			compatible = "apple,t8010-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x02f20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a0c0000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0c0000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 216 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 230 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 231 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 232 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 233 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x8c000>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,t8010-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		pinctrl_ap: pinctrl@20f100000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0f100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 219>;
+			apple,npins = <219>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(211, 1)>,
+					 <APPLE_PINMUX(210, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(156, 1)>,
+					 <APPLE_PINMUX(155, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(58, 1)>,
+					 <APPLE_PINMUX(57, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(158, 1)>,
+					 <APPLE_PINMUX(157, 1)>;
+			};
+		};
+
+		pinctrl_aop: pinctrl@2100f0000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x100f0000 0x0 0x100000>;
+			power-domains = <&ps_aop_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 42>;
+			apple,npins = <42>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 131 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@210200000 {
+			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x10200000 0 0x84000>;
+		};
+
+		wdt: watchdog@2102b0000 {
+			compatible = "apple,t8010-wdt", "apple,wdt";
+			reg = <0x2 0x102b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A10X doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "t8011-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8012-j132.dts b/arch/arm64/boot/dts/apple/t8012-j132.dts
new file mode 100644
index 000000000000..7dcac51703ff
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j132.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro15,2 (j132), J132, iBridge2,4
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro15,2 (j132)";
+	compatible = "apple,j132", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j137.dts b/arch/arm64/boot/dts/apple/t8012-j137.dts
new file mode 100644
index 000000000000..dbde1ad7ce14
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j137.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 iMacPro1,1 (j137), J137, iBridge2,1
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 iMacPro1,1 (j137)";
+	compatible = "apple,j137", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j140a.dts b/arch/arm64/boot/dts/apple/t8012-j140a.dts
new file mode 100644
index 000000000000..5df1ff74d2df
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j140a.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookAir8,2 (j140a), J140a, iBridge2,12
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 MacBookAir8,2 (j140a)";
+	compatible = "apple,j140a", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j140k.dts b/arch/arm64/boot/dts/apple/t8012-j140k.dts
new file mode 100644
index 000000000000..a0ef1585e5c2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j140k.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookAir8,1 (j140k), J140k, iBridge2,8
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 MacBookAir8,1 (j140k)";
+	compatible = "apple,j140k", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j152f.dts b/arch/arm64/boot/dts/apple/t8012-j152f.dts
new file mode 100644
index 000000000000..261416eaf97e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j152f.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro16,1 (j152f), J152f, iBridge2,14
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro16,1 (j152f)";
+	compatible = "apple,j152f", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j160.dts b/arch/arm64/boot/dts/apple/t8012-j160.dts
new file mode 100644
index 000000000000..fbcc0604f4a0
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j160.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacPro7,1 (j160), J160, iBridge2,6
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 MacPro7,1 (j160)";
+	compatible = "apple,j160", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j174.dts b/arch/arm64/boot/dts/apple/t8012-j174.dts
new file mode 100644
index 000000000000..d11c70f84a71
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j174.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 Macmini8,1 (j174), J174, iBridge2,5
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 Macmini8,1 (j174)";
+	compatible = "apple,j174", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j185.dts b/arch/arm64/boot/dts/apple/t8012-j185.dts
new file mode 100644
index 000000000000..33492f5db46d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j185.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 iMac20,1 (j185), J185, iBridge2,19
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 iMac20,1 (j185)";
+	compatible = "apple,j185", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j185f.dts b/arch/arm64/boot/dts/apple/t8012-j185f.dts
new file mode 100644
index 000000000000..3a4abdd8f7d7
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j185f.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 iMac20,2 (j185f), J185f, iBridge2,20
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 iMac20,2 (j185f)";
+	compatible = "apple,j185f", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j213.dts b/arch/arm64/boot/dts/apple/t8012-j213.dts
new file mode 100644
index 000000000000..8270812b9a68
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j213.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro15,4 (j213), J213, iBridge2,10
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro15,4 (j213)";
+	compatible = "apple,j213", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j214k.dts b/arch/arm64/boot/dts/apple/t8012-j214k.dts
new file mode 100644
index 000000000000..5b8e42512060
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j214k.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro16,2 (j214k), J214k, iBridge2,16
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro16,2 (j214k)";
+	compatible = "apple,j214k", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j215.dts b/arch/arm64/boot/dts/apple/t8012-j215.dts
new file mode 100644
index 000000000000..ad574fbf7f92
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j215.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro16,4 (j215), J215, iBridge2,22
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro16,4 (j215)";
+	compatible = "apple,j215", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j223.dts b/arch/arm64/boot/dts/apple/t8012-j223.dts
new file mode 100644
index 000000000000..de75d775aac5
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j223.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro16,3 (j223), J223, iBridge2,21
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro16,3 (j223)";
+	compatible = "apple,j223", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j230k.dts b/arch/arm64/boot/dts/apple/t8012-j230k.dts
new file mode 100644
index 000000000000..4b19bc70ab0f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j230k.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookAir9,1 (j230k), J230k, iBridge2,15
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 MacBookAir9,1 (j230k)";
+	compatible = "apple,j230k", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j680.dts b/arch/arm64/boot/dts/apple/t8012-j680.dts
new file mode 100644
index 000000000000..aa5a72e07d3f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j680.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro15,1 (j680), J680, iBridge2,3
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro15,1 (j680)";
+	compatible = "apple,j680", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j780.dts b/arch/arm64/boot/dts/apple/t8012-j780.dts
new file mode 100644
index 000000000000..9cee891cb16d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j780.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro15,3 (j780), J780, iBridge2,7
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro15,3 (j780)";
+	compatible = "apple,j780", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8012-jxxx.dtsi
new file mode 100644
index 000000000000..36e82633bc52
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-jxxx.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Common Device Tree for all T2 devices
+ *
+ * target-type: J132, J137, J140a, J140k, J152f, J160, J174, J185, J185f
+ * J213, J214k, J215, J223, J230k, J680, J780
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+#include "t8012.dtsi"
+
+/ {
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8012-pmgr.dtsi
new file mode 100644
index 000000000000..35a462edd4af
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-pmgr.dtsi
@@ -0,0 +1,837 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8012 "T2" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80158 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80160 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_iomux: power-controller@80150 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "iomux";
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_gpio: power-controller@80110 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pcie_down_ref: power-controller@80138 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_down_ref";
+	};
+
+	ps_pcie_stg0_ref: power-controller@80140 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_stg0_ref";
+	};
+
+	ps_pcie_stg1_ref: power-controller@80148 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_stg1_ref";
+	};
+
+	ps_mca0: power-controller@80170 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80178 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80180 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80188 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80190 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca5: power-controller@80198 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@801a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@801b0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801b8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801c0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801e0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801e8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801f0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801f8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@801a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80168 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_isp_sens0: power-controller@80120 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens0";
+	};
+
+	ps_isp_sens1: power-controller@80128 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens1";
+	};
+
+	ps_isp_sens2: power-controller@80130 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens2";
+	};
+
+	ps_pms: power-controller@80118 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_i2c4: power-controller@801c8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c5: power-controller@801d0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c6: power-controller@801d8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_usb: power-controller@80268 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@80270 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@80278 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@80288 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_rtmux: power-controller@802a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rtmux";
+	};
+
+	ps_media: power-controller@802d8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp_sys: power-controller@802d0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_msr: power-controller@802e8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@802e0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0_fe: power-controller@802b0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_disp0_be: power-controller@802b8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_be";
+		power-domains = <&ps_disp0_fe>;
+	};
+
+	ps_uart0: power-controller@80200 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@80208 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@80210 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@80218 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@80220 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_dpa: power-controller@80228 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_hfd0: power-controller@80230 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hfd0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80240 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80248 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@80250 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@80258 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		/* Not used on some devicecs, to be disabled by loader */
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@80260 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		/* Not used on some devicecs, to be disabled by loader */
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_usb2host0_ohci: power-controller@80280 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usbotg: power-controller@80290 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@80298 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_mipi_dsi: power-controller@802c8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_disp0_be>;
+	};
+
+	ps_pmp: power-controller@802f0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@802f8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_pcie_up_af: power-controller@80320 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_up_af";
+		power-domains = <&ps_iomux>;
+	};
+
+	ps_pcie_up: power-controller@80328 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_up";
+		power-domains = <&ps_pcie_up_af>;
+	};
+
+	ps_venc_sys: power-controller@80300 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_media>;
+	};
+
+	ps_ans2: power-controller@80308 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans2";
+		power-domains = <&ps_iomux>;
+	};
+
+	ps_pcie_down: power-controller@80310 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_down";
+		power-domains = <&ps_iomux>;
+	};
+
+	ps_pcie_down_aux: power-controller@80318 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_down_aux";
+	};
+
+	ps_pcie_up_aux: power-controller@80330 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_up_aux";
+		power-domains = <&ps_pcie_up>;
+	};
+
+	ps_pcie_stg0: power-controller@80338 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_stg0";
+		power-domains = <&ps_ans2>;
+	};
+
+	ps_pcie_stg0_aux: power-controller@80340 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_stg0_aux";
+	};
+
+	ps_pcie_stg1: power-controller@80348 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_stg1";
+		power-domains = <&ps_ans2>;
+	};
+
+	ps_pcie_stg1_aux: power-controller@80350 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_stg1_aux";
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_isp_rsts0: power-controller@84000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts0";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_rsts1: power-controller@84008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts1";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_vis: power-controller@84010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_vis";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_be: power-controller@84018 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_be";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_pearl: power-controller@84020 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_pearl";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_venc_pipe4: power-controller@88000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+	};
+
+	ps_venc_pipe5: power-controller@88008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+	};
+
+	ps_venc_me0: power-controller@88010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88018 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_spmi: power-controller@80058 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80058 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spmi";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_aon: power-controller@80060 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80060 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_aon";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_smc_fabric: power-controller@80030 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smc_fabric";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_smc_aon: power-controller@80088 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80088 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smc_aon";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_debug: power-controller@80050 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_nub_sram: power-controller@801a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_sram";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_fabric: power-controller@80198 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_fabric";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_smc_cpu: power-controller@801a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smc_cpu";
+		power-domains = <&ps_smc_fabric &ps_smc_aon>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-touchbar.dtsi b/arch/arm64/boot/dts/apple/t8012-touchbar.dtsi
new file mode 100644
index 000000000000..fc4a80d0c787
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-touchbar.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Common Device Tree for T2 devices with a Touch Bar
+ *
+ * target-type: J152f, J213, J214k, J215, J223, J680, J780
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	chosen {
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0_fe &ps_disp0_be &ps_mipi_dsi>;
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8012.dtsi b/arch/arm64/boot/dts/apple/t8012.dtsi
new file mode 100644
index 000000000000..e7923814169b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012.dtsi
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T8012 "T2" SoC
+ *
+ * Other names: H9M, "Gibraltar"
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@10000 {
+			compatible = "apple,hurricane-zephyr";
+			reg = <0x0 0x10000>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		cpu1: cpu@10001 {
+			compatible = "apple,hurricane-zephyr";
+			reg = <0x0 0x10001>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x300000>; /* P-cluster */
+		};
+	};
+
+	fusion_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		/*
+		 * Apple Fusion Architecture: Hardware big.LITTLE switcher
+		 * that use p-state transitions to switch between cores.
+		 * Only one type of core can be active at a given time.
+		 *
+		 * The E-core frequencies are adjusted so performance scales
+		 * linearly with reported clock speed.
+		 */
+
+		opp01 {
+			opp-hz = /bits/ 64 <172000000>; /* 300 MHz, E-core */
+			opp-level = <1>;
+			clock-latency-ns = <11000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <230000000>; /* 396 MHz, E-core */
+			opp-level = <2>;
+			clock-latency-ns = <140000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <425000000>; /* 732 MHz, E-core */
+			opp-level = <3>;
+			clock-latency-ns = <110000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <637000000>; /* 1092 MHz, E-core */
+			opp-level = <4>;
+			clock-latency-ns = <130000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <756000000>;
+			opp-level = <5>;
+			clock-latency-ns = <130000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-level = <6>;
+			clock-latency-ns = <130000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1356000000>;
+			opp-level = <7>;
+			clock-latency-ns = <130000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <1644000000>;
+			opp-level = <8>;
+			clock-latency-ns = <135000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <1944000000>;
+			opp-level = <9>;
+			clock-latency-ns = <140000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2244000000>;
+			opp-level = <10>;
+			clock-latency-ns = <150000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp11 {
+			opp-hz = /bits/ 64 <2340000000>;
+			opp-level = <11>;
+			clock-latency-ns = <150000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202f20000 {
+			compatible = "apple,t8010-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x02f20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a600000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a600000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 271 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x8c000>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,t8010-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		pinctrl_ap: pinctrl@20f100000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0f100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 221>;
+			apple,npins = <221>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 51 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_aop: pinctrl@2100f0000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0100f0000 0x0 0x10000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 41>;
+			apple,npins = <41>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 137 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		spmi: spmi@211180700 {
+			compatible = "apple,t8012-spmi", "apple,t8103-spmi";
+			reg = <0x2 0x11180700 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		pinctrl_nub: pinctrl@2111f0000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x111f0000 0x0 0x1000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_nub 0 0 19>;
+			apple,npins = <19>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 166 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@211200000 {
+			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x11200000 0 0x84000>;
+		};
+
+		wdt: watchdog@2112b0000 {
+			compatible = "apple,t8010-wdt", "apple,wdt";
+			reg = <0x2 0x112b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 168 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_smc: pinctrl@212024000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x12024000 0x0 0x1000>;
+			power-domains = <&ps_smc_cpu>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_smc 0 0 81>;
+			apple,npins = <81>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 201 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * SMC is not yet supported and accessing this pinctrl while SMC is
+			 * suspended results in a hang.
+			 */
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that T2 doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "t8012-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8015-8.dtsi b/arch/arm64/boot/dts/apple/t8015-8.dtsi
new file mode 100644
index 000000000000..0300ee1a2ffb
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-8.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 8 common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "t8015.dtsi"
+#include "t8015-common.dtsi"
+
+/ {
+	chassis-type = "handset";
+};
+
+&dwi_bl {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-8plus.dtsi b/arch/arm64/boot/dts/apple/t8015-8plus.dtsi
new file mode 100644
index 000000000000..ea291a95f028
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-8plus.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 8 Plus common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/* The 8 Plus has minor differences like 1 more camera, 1 GiB of RAM more and a bigger display. */
+#include "t8015-8.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8015-common.dtsi b/arch/arm64/boot/dts/apple/t8015-common.dtsi
new file mode 100644
index 000000000000..498f58fb9715
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-common.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 8, iPhone 8 Plus, iPhone X
+ *
+ * This file contains parts common to all Apple A11 devices.
+ *
+ * target-type: D20, D21, D22, D201, D211, D221
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0_be &ps_mipi_dsi &ps_disp0_hilo &ps_disp0_ppp>;
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-d20.dts b/arch/arm64/boot/dts/apple/t8015-d20.dts
new file mode 100644
index 000000000000..35d79e2ceebc
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-d20.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 8 (Global), D20 iPhone10,1 (A1863/A1906/A1907)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8015-8.dtsi"
+
+/ {
+	compatible = "apple,d20", "apple,t8015", "apple,arm-platform";
+	model = "Apple iPhone 8 (Global)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-d201.dts b/arch/arm64/boot/dts/apple/t8015-d201.dts
new file mode 100644
index 000000000000..31e0947fee70
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-d201.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 8 (GSM), D20 iPhone10,4 (A1905)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8015-8.dtsi"
+
+/ {
+	compatible = "apple,d201", "apple,t8015", "apple,arm-platform";
+	model = "Apple iPhone 8 (GSM)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-d21.dts b/arch/arm64/boot/dts/apple/t8015-d21.dts
new file mode 100644
index 000000000000..a902ba7f1133
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-d21.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 8 Plus (Global), D21 iPhone10,2 (A1864/A1897/A1898)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8015-8plus.dtsi"
+
+/ {
+	compatible = "apple,d21", "apple,t8015", "apple,arm-platform";
+	model = "Apple iPhone 8 Plus (Global)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-d211.dts b/arch/arm64/boot/dts/apple/t8015-d211.dts
new file mode 100644
index 000000000000..3b3f886c0c09
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-d211.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone 8 Plus (GSM), D211 iPhone10,5 (A1899)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8015-8plus.dtsi"
+
+/ {
+	compatible = "apple,d211", "apple,t8015", "apple,arm-platform";
+	model = "Apple iPhone 8 Plus (GSM)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-d22.dts b/arch/arm64/boot/dts/apple/t8015-d22.dts
new file mode 100644
index 000000000000..5a7a6092c2d0
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-d22.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone X (Global), D22, iPhone10,3 (A1865)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8015-x.dtsi"
+
+/ {
+	compatible = "apple,d22", "apple,t8015", "apple,arm-platform";
+	model = "Apple iPhone X (Global)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-d221.dts b/arch/arm64/boot/dts/apple/t8015-d221.dts
new file mode 100644
index 000000000000..dd920c945bd6
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-d221.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone X (GSM), D221, iPhone10,6 (A1901)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t8015-x.dtsi"
+
+/ {
+	compatible = "apple,d221", "apple,t8015", "apple,arm-platform";
+	model = "Apple iPhone X (GSM)";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8015-pmgr.dtsi
new file mode 100644
index 000000000000..1d8da9c7863e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-pmgr.dtsi
@@ -0,0 +1,932 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8015 "A11" SoC
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu2: power-controller@80010 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu2";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu3: power-controller@80018 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu3";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu4: power-controller@80020 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu4";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu5: power-controller@80028 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu5";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80158 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80160 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@80110 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@80118 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms: power-controller@80120 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pcie_ref: power-controller@80148 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_mca0: power-controller@80170 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80178 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80180 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80188 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80190 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@801a0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@801a8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@801b0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801b8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801c0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801c8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801d0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801d8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801e0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@801e8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@801f0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@801f8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80168 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsicphy: power-controller@80128 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsicphy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_ispsens0: power-controller@80130 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@80138 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_ispsens2: power-controller@80140 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens2";
+	};
+
+	ps_mca5: power-controller@80198 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_usb: power-controller@80270 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctlreg: power-controller@80278 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctlreg";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@80280 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctlreg>;
+	};
+
+	ps_usb2host1: power-controller@80290 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctlreg>;
+	};
+
+	ps_rtmux: power-controller@802b0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rtmux";
+	};
+
+	ps_media: power-controller@802f0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_jpg: power-controller@802f8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0_fe: power-controller@802b8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_disp0_be: power-controller@802c0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_be";
+		power-domains = <&ps_disp0_fe>;
+	};
+
+	ps_disp0_gp: power-controller@802c8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_gp";
+		power-domains = <&ps_disp0_be>;
+		status = "disabled";
+	};
+
+	ps_uart3: power-controller@80200 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@80208 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@80210 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@80218 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@80220 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@80228 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_hfd0: power-controller@80238 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hfd0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80248 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80250 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4X interface */
+	};
+
+	ps_dcs1: power-controller@80258 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4X interface */
+	};
+
+	ps_dcs2: power-controller@80260 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4X interface */
+	};
+
+	ps_dcs3: power-controller@80268 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4X interface */
+	};
+
+	ps_usb2host0_ohci: power-controller@80288 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usb2dev: power-controller@80298 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2dev";
+		power-domains = <&ps_usbctlreg>;
+	};
+
+	ps_smx: power-controller@802a0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802a8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_mipi_dsi: power-controller@802d8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_dp: power-controller@802e0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0_be>;
+	};
+
+	ps_dpa: power-controller@80230 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa";
+	};
+
+	ps_disp0_be_2x: power-controller@802d0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_be_2x";
+		power-domains = <&ps_disp0_be>;
+	};
+
+	ps_isp_sys: power-controller@80350 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_msr: power-controller@80300 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_venc_sys: power-controller@80398 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80398 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pmp: power-controller@80308 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@80310 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_pcie: power-controller@80318 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+		power-domains = <&ps_pcie_aux>, <&ps_pcie_direct>, <&ps_pcie_ref>;
+	};
+
+	ps_pcie_aux: power-controller@80320 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_vdec0: power-controller@80388 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec0";
+		power-domains = <&ps_media>;
+	};
+
+	ps_gfx: power-controller@80338 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_ans2: power-controller@80328 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans2";
+		apple,always-on;
+	};
+
+	ps_pcie_direct: power-controller@80330 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_direct";
+		apple,always-on;
+	};
+
+	ps_avd_sys: power-controller@803a8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x803a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "avd_sys";
+		power-domains = <&ps_media>;
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_disp0_gp0: power-controller@80830 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80830 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_gp0";
+		power-domains = <&ps_disp0_gp>;
+		status = "disabled";
+	};
+
+	ps_disp0_gp1: power-controller@80838 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80838 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_gp1";
+		status = "disabled";
+	};
+
+	ps_disp0_ppp: power-controller@80840 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80840 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_ppp";
+	};
+
+	ps_disp0_hilo: power-controller@80848 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80848 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_hilo";
+	};
+
+	ps_isp_rsts0: power-controller@84000 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts0";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_rsts1: power-controller@84008 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts1";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_vis: power-controller@84010 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_vis";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_be: power-controller@84018 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_be";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_pearl: power-controller@84020 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_pearl";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_dprx: power-controller@84028 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dprx";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_cnv: power-controller@84030 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_cnv";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_venc_dma: power-controller@88000 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_dma";
+	};
+
+	ps_venc_pipe4: power-controller@88010 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+	};
+
+	ps_venc_pipe5: power-controller@88018 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+	};
+
+	ps_venc_me0: power-controller@88020 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88028 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_aop_base: power-controller@80008 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_base";
+		power-domains = <&ps_aop_cpu &ps_aop_filter>;
+		apple,always-on; /* Always on processor */
+	};
+
+	ps_debug: power-controller@80050 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_aop_cpu: power-controller@80020 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_cpu";
+	};
+
+	ps_aop_filter: power-controller@80000 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_filter";
+	};
+
+	ps_spmi: power-controller@80058 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80058 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spmi";
+		apple,always-on; /* System Power Management Interface */
+	};
+
+	ps_smc_i2cm1: power-controller@800a8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x800a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smc_i2cm1";
+	};
+
+	ps_smc_fabric: power-controller@80030 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smc_fabric";
+	};
+
+	ps_smc_cpu: power-controller@80140 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smc_cpu";
+		power-domains = <&ps_smc_fabric &ps_smc_i2cm1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-x.dtsi b/arch/arm64/boot/dts/apple/t8015-x.dtsi
new file mode 100644
index 000000000000..41134ed40b89
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-x.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPhone X common device tree
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "t8015.dtsi"
+#include "t8015-common.dtsi"
+
+/ {
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015.dtsi b/arch/arm64/boot/dts/apple/t8015.dtsi
new file mode 100644
index 000000000000..586d3cf1f375
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015.dtsi
@@ -0,0 +1,535 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T8015 "A11" SoC
+ *
+ * Other names: H10, "Skye"
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e0>;
+				};
+				core1 {
+					cpu = <&cpu_e1>;
+				};
+				core2 {
+					cpu = <&cpu_e2>;
+				};
+				core3 {
+					cpu = <&cpu_e3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p0>;
+				};
+				core1 {
+					cpu = <&cpu_p1>;
+				};
+			};
+		};
+
+		cpu_e0: cpu@0 {
+			compatible = "apple,mistral";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq_e>;
+			operating-points-v2 = <&mistral_opp>;
+			capacity-dmips-mhz = <633>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x8000>;
+			d-cache-size = <0x8000>;
+		};
+
+		cpu_e1: cpu@1 {
+			compatible = "apple,mistral";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq_e>;
+			operating-points-v2 = <&mistral_opp>;
+			capacity-dmips-mhz = <633>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x8000>;
+			d-cache-size = <0x8000>;
+		};
+
+		cpu_e2: cpu@2 {
+			compatible = "apple,mistral";
+			reg = <0x0 0x2>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq_e>;
+			operating-points-v2 = <&mistral_opp>;
+			capacity-dmips-mhz = <633>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x8000>;
+			d-cache-size = <0x8000>;
+		};
+
+		cpu_e3: cpu@3 {
+			compatible = "apple,mistral";
+			reg = <0x0 0x3>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq_e>;
+			operating-points-v2 = <&mistral_opp>;
+			capacity-dmips-mhz = <633>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x8000>;
+			d-cache-size = <0x8000>;
+		};
+
+		cpu_p0: cpu@10004 {
+			compatible = "apple,monsoon";
+			reg = <0x0 0x10004>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq_p>;
+			operating-points-v2 = <&monsoon_opp>;
+			capacity-dmips-mhz = <1024>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_p1: cpu@10005 {
+			compatible = "apple,monsoon";
+			reg = <0x0 0x10005>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq_p>;
+			operating-points-v2 = <&monsoon_opp>;
+			capacity-dmips-mhz = <1024>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x800000>;
+		};
+	};
+
+	mistral_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <1800>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <453000000>;
+			opp-level = <2>;
+			clock-latency-ns = <140000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <672000000>;
+			opp-level = <3>;
+			clock-latency-ns = <105000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <972000000>;
+			opp-level = <4>;
+			clock-latency-ns = <115000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1272000000>;
+			opp-level = <5>;
+			clock-latency-ns = <125000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1572000000>;
+			opp-level = <6>;
+			clock-latency-ns = <135000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp07 {
+			opp-hz = /bits/ 64 <1680000000>;
+			opp-level = <7>;
+			clock-latency-ns = <135000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	monsoon_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <1400>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <453000000>;
+			opp-level = <2>;
+			clock-latency-ns = <140000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <853000000>;
+			opp-level = <3>;
+			clock-latency-ns = <110000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1332000000>;
+			opp-level = <4>;
+			clock-latency-ns = <110000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1812000000>;
+			opp-level = <5>;
+			clock-latency-ns = <125000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <2064000000>;
+			opp-level = <6>;
+			clock-latency-ns = <130000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2304000000>;
+			opp-level = <7>;
+			clock-latency-ns = <140000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp08 {
+			opp-hz = /bits/ 64 <2376000000>;
+			opp-level = <8>;
+			clock-latency-ns = <140000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq_e: performance-controller@208e20000 {
+			compatible = "apple,t8015-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x08e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		cpufreq_p: performance-controller@208ea0000 {
+			compatible = "apple,t8015-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x08ea0000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		i2c0: i2c@22e200000 {
+			compatible = "apple,t8015-i2c", "apple,i2c";
+			reg = <0x2 0x2e200000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 304 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@22e204000 {
+			compatible = "apple,t8015-i2c", "apple,i2c";
+			reg = <0x2 0x2e204000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 305 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@22e208000 {
+			compatible = "apple,t8015-i2c", "apple,i2c";
+			reg = <0x2 0x2e208000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 306 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@22e20c000 {
+			compatible = "apple,t8015-i2c", "apple,i2c";
+			reg = <0x2 0x2e20c000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 307 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		serial0: serial@22e600000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x2e600000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 282 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		aic: interrupt-controller@232100000 {
+			compatible = "apple,t8015-aic", "apple,aic";
+			reg = <0x2 0x32100000 0x0 0x8000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		pmgr: power-management@232000000 {
+			compatible = "apple,t8015-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x32000000 0 0x8c000>;
+		};
+
+		dwi_bl: backlight@232200080 {
+			compatible = "apple,t8015-dwi-bl", "apple,dwi-bl";
+			reg = <0x2 0x32200080 0x0 0x8>;
+			power-domains = <&ps_dwi>;
+			status = "disabled";
+		};
+
+		pinctrl_ap: pinctrl@233100000 {
+			compatible = "apple,t8015-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x33100000 0x0 0x1000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 223>;
+			apple,npins = <223>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 56 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(73, 1)>,
+					 <APPLE_PINMUX(72, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(182, 1)>,
+					 <APPLE_PINMUX(181, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(4, 1)>,
+					 <APPLE_PINMUX(3, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(184, 1)>,
+					 <APPLE_PINMUX(183, 1)>;
+			};
+		};
+
+		pinctrl_aop: pinctrl@2340f0000 {
+			compatible = "apple,t8015-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x340f0000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 49>;
+			apple,npins = <49>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 138 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 141 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		spmi: spmi@235180700 {
+			compatible = "apple,t8015-spmi", "apple,t8103-spmi";
+			reg = <0x2 0x35180700 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		pinctrl_nub: pinctrl@2351f0000 {
+			compatible = "apple,t8015-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x351f0000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_nub 0 0 8>;
+			apple,npins = <8>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 170 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@235200000 {
+			compatible = "apple,t8015-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x35200000 0 0x84000>;
+		};
+
+		wdt: watchdog@2352b0000 {
+			compatible = "apple,t8015-wdt", "apple,wdt";
+			reg = <0x2 0x352b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 172 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_smc: pinctrl@236024000 {
+			compatible = "apple,t8015-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x36024000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_smc 0 0 6>;
+			apple,npins = <6>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 205 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * SMC is not yet supported and accessing this pinctrl while SMC is
+			 * suspended results in a hang.
+			 */
+			status = "disabled";
+		};
+
+		ans_mbox: mbox@257008000 {
+			compatible = "apple,t8015-asc-mailbox";
+			reg = <0x2 0x57008000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 265 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 266 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 267 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 268 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+			power-domains = <&ps_ans2>;
+		};
+
+		sart: iommu@259c50000 {
+			compatible = "apple,t8015-sart";
+			reg = <0x2 0x59c50000 0x0 0x10000>;
+			power-domains = <&ps_ans2>;
+		};
+
+		nvme@259cc0000 {
+			compatible = "apple,t8015-nvme-ans2";
+			reg = <0x2 0x59cc0000 0x0 0x40000>,
+				<0x2 0x59d20000 0x0 0x2000>;
+			reg-names = "nvme", "ans";
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 270 IRQ_TYPE_LEVEL_HIGH>;
+			mboxes = <&ans_mbox>;
+			apple,sart = <&sart>;
+			power-domains = <&ps_ans2>, <&ps_pcie>;
+			power-domain-names = "ans", "apcie0";
+			resets = <&ps_ans2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A11 doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "t8015-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8103-j274.dts b/arch/arm64/boot/dts/apple/t8103-j274.dts
index 2cd429efba5b..1c3e37f86d46 100644
--- a/arch/arm64/boot/dts/apple/t8103-j274.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j274.dts
@@ -21,6 +21,14 @@
 	};
 };
 
+&bluetooth0 {
+	brcm,board-type = "apple,atlantisb";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,atlantisb";
+};
+
 /*
  * Force the bus number assignments so that we can declare some of the
  * on-board devices and properties that are populated by the bootloader
@@ -29,10 +37,12 @@
 
 &port01 {
 	bus-range = <2 2>;
+	status = "okay";
 };
 
 &port02 {
 	bus-range = <3 3>;
+	status = "okay";
 	ethernet0: ethernet@0,0 {
 		reg = <0x30000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
@@ -40,6 +50,14 @@
 	};
 };
 
+&pcie0_dart_1 {
+	status = "okay";
+};
+
+&pcie0_dart_2 {
+	status = "okay";
+};
+
 &i2c2 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts b/arch/arm64/boot/dts/apple/t8103-j293.dts
index 49cdf4b560a3..5b3c42e9f0e6 100644
--- a/arch/arm64/boot/dts/apple/t8103-j293.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j293.dts
@@ -11,26 +11,40 @@
 
 #include "t8103.dtsi"
 #include "t8103-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
 
 / {
 	compatible = "apple,j293", "apple,t8103", "apple,arm-platform";
 	model = "Apple MacBook Pro (13-inch, M1, 2020)";
-};
 
-/*
- * Remove unused PCIe ports and disable the associated DARTs.
- */
+	/*
+	 * All of those are used by the bootloader to pass calibration
+	 * blobs and other device-specific properties
+	 */
+	aliases {
+		touchbar0 = &touchbar0;
+	};
 
-&pcie0_dart_1 {
-	status = "disabled";
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
 };
 
-&pcie0_dart_2 {
-	status = "disabled";
+&bluetooth0 {
+	brcm,board-type = "apple,honshu";
 };
 
-/delete-node/ &port01;
-/delete-node/ &port02;
+&wifi0 {
+	brcm,board-type = "apple,honshu";
+};
 
 &i2c2 {
 	status = "okay";
@@ -39,3 +53,69 @@
 &i2c4 {
 	status = "okay";
 };
+
+&fpwm1 {
+	status = "okay";
+};
+
+&spi0 {
+	cs-gpios = <&pinctrl_ap 109 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	touchbar0: touchbar@0 {
+		compatible = "apple,j293-touchbar";
+		reg = <0>;
+		spi-max-frequency = <11500000>;
+		spi-cs-setup-delay-ns = <2000>;
+		spi-cs-hold-delay-ns = <2000>;
+		reset-gpios = <&pinctrl_ap 139 GPIO_ACTIVE_LOW>;
+		interrupts-extended = <&pinctrl_ap 194 IRQ_TYPE_EDGE_FALLING>;
+		firmware-name = "apple/dfrmtfw-j293.bin";
+		touchscreen-size-x = <23045>;
+		touchscreen-size-y = <640>;
+		touchscreen-inverted-y;
+	};
+};
+
+/*
+ * The driver depends on boot loader initialized state which resets when this
+ * power-domain is powered off. This happens on suspend or when the driver is
+ * missing during boot. Mark the domain as always on until the driver can
+ * handle this.
+ */
+&ps_dispdfr_be {
+	apple,always-on;
+};
+
+&display_dfr {
+	status = "okay";
+};
+
+&dfr_mipi_out {
+	dfr_mipi_out_panel: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&dfr_panel_in>;
+	};
+};
+
+&displaydfr_mipi {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	dfr_panel: panel@0 {
+		compatible = "apple,j293-summit", "apple,summit";
+		reg = <0>;
+		max-brightness = <255>;
+
+		port {
+			dfr_panel_in: endpoint {
+				remote-endpoint = <&dfr_mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&displaydfr_dart {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j313.dts b/arch/arm64/boot/dts/apple/t8103-j313.dts
index b0ebb45bdb6f..97a4344d8dca 100644
--- a/arch/arm64/boot/dts/apple/t8103-j313.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j313.dts
@@ -11,23 +11,33 @@
 
 #include "t8103.dtsi"
 #include "t8103-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
 
 / {
 	compatible = "apple,j313", "apple,t8103", "apple,arm-platform";
 	model = "Apple MacBook Air (M1, 2020)";
-};
 
-/*
- * Remove unused PCIe ports and disable the associated DARTs.
- */
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
 
-&pcie0_dart_1 {
-	status = "disabled";
+&bluetooth0 {
+	brcm,board-type = "apple,shikoku";
 };
 
-&pcie0_dart_2 {
-	status = "disabled";
+&wifi0 {
+	brcm,board-type = "apple,shikoku";
 };
 
-/delete-node/ &port01;
-/delete-node/ &port02;
+&fpwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j456.dts b/arch/arm64/boot/dts/apple/t8103-j456.dts
index 884fddf7d363..58c8e43789b4 100644
--- a/arch/arm64/boot/dts/apple/t8103-j456.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j456.dts
@@ -14,13 +14,21 @@
 
 / {
 	compatible = "apple,j456", "apple,t8103", "apple,arm-platform";
-	model = "Apple iMac (24-inch, 4x USB-C, M1, 2020)";
+	model = "Apple iMac (24-inch, 4x USB-C, M1, 2021)";
 
 	aliases {
 		ethernet0 = &ethernet0;
 	};
 };
 
+&bluetooth0 {
+	brcm,board-type = "apple,capri";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,capri";
+};
+
 &i2c0 {
 	hpm2: usb-pd@3b {
 		compatible = "apple,cd321x";
@@ -47,13 +55,23 @@
 
 &port01 {
 	bus-range = <2 2>;
+	status = "okay";
 };
 
 &port02 {
 	bus-range = <3 3>;
+	status = "okay";
 	ethernet0: ethernet@0,0 {
 		reg = <0x30000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
 		local-mac-address = [00 10 18 00 00 00];
 	};
 };
+
+&pcie0_dart_1 {
+	status = "okay";
+};
+
+&pcie0_dart_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j457.dts b/arch/arm64/boot/dts/apple/t8103-j457.dts
index d7c622931627..7089ccf3ce55 100644
--- a/arch/arm64/boot/dts/apple/t8103-j457.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j457.dts
@@ -14,7 +14,7 @@
 
 / {
 	compatible = "apple,j457", "apple,t8103", "apple,arm-platform";
-	model = "Apple iMac (24-inch, 2x USB-C, M1, 2020)";
+	model = "Apple iMac (24-inch, 2x USB-C, M1, 2021)";
 
 	aliases {
 		ethernet0 = &ethernet0;
@@ -22,26 +22,37 @@
 };
 
 /*
+ * Adjust pcie0's iommu-map to account for the disabled port01.
+ */
+&pcie0 {
+	iommu-map = <0x100 &pcie0_dart_0 1 1>,
+			<0x200 &pcie0_dart_2 1 1>;
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,santorini";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,santorini";
+};
+
+/*
  * Force the bus number assignments so that we can declare some of the
  * on-board devices and properties that are populated by the bootloader
  * (such as MAC addresses).
  */
 
 &port02 {
-	bus-range = <3 3>;
+	bus-range = <2 2>;
+	status = "okay";
 	ethernet0: ethernet@0,0 {
-		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		reg = <0x20000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
 		local-mac-address = [00 10 18 00 00 00];
 	};
 };
 
-/*
- * Remove unused PCIe port and disable the associated DART.
- */
-
-&pcie0_dart_1 {
-	status = "disabled";
+&pcie0_dart_2 {
+	status = "okay";
 };
-
-/delete-node/ &port01;
diff --git a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
index fe2ae40fa9dd..0c8206156bfe 100644
--- a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
@@ -11,6 +11,7 @@
 
 / {
 	aliases {
+		bluetooth0 = &bluetooth0;
 		serial0 = &serial0;
 		serial2 = &serial2;
 		wifi0 = &wifi0;
@@ -70,9 +71,24 @@
  */
 &port00 {
 	bus-range = <1 1>;
-	wifi0: network@0,0 {
+	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4425";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
 		local-mac-address = [00 00 00 00 00 00];
+		apple,antenna-sku = "XX";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f69";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
 	};
 };
+
+&nco_clkref {
+	clock-frequency = <900000000>;
+};
+
+#include "spi1-nvram.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
index a6dbb1f485d8..c41c57d63997 100644
--- a/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
@@ -339,7 +339,7 @@
 		#power-domain-cells = <0>;
 		#reset-cells = <0>;
 		label = "sio_adma";
-		power-domains = <&ps_sio>, <&ps_pms>;
+		power-domains = <&ps_sio>, <&ps_pms>, <&ps_audio_p>;
 	};
 
 	ps_aes: power-controller@238 {
@@ -387,6 +387,15 @@
 		power-domains = <&ps_sio>, <&ps_spi_p>;
 	};
 
+	ps_spi4: power-controller@260 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi4";
+		power-domains = <&ps_sio>, <&ps_spi_p>;
+	};
+
 	ps_uart_n: power-controller@268 {
 		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
 		reg = <0x268 4>;
@@ -558,15 +567,6 @@
 		apple,always-on; /* Memory controller */
 	};
 
-	ps_spi4: power-controller@260 {
-		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
-		reg = <0x260 4>;
-		#power-domain-cells = <0>;
-		#reset-cells = <0>;
-		label = "spi4";
-		power-domains = <&ps_sio>, <&ps_spi_p>;
-	};
-
 	ps_dcs0: power-controller@300 {
 		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
 		reg = <0x300 4>;
diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 51a63b29d404..8b7b27887968 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/apple-aic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
 
 / {
 	compatible = "apple,t8103", "apple,arm-platform";
@@ -18,73 +19,287 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		gpu = &gpu;
+	};
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		cpu0: cpu@0 {
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e0>;
+				};
+				core1 {
+					cpu = <&cpu_e1>;
+				};
+				core2 {
+					cpu = <&cpu_e2>;
+				};
+				core3 {
+					cpu = <&cpu_e3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p0>;
+				};
+				core1 {
+					cpu = <&cpu_p1>;
+				};
+				core2 {
+					cpu = <&cpu_p2>;
+				};
+				core3 {
+					cpu = <&cpu_p3>;
+				};
+			};
+		};
+
+		cpu_e0: cpu@0 {
 			compatible = "apple,icestorm";
 			device_type = "cpu";
 			reg = <0x0 0x0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
 		};
 
-		cpu1: cpu@1 {
+		cpu_e1: cpu@1 {
 			compatible = "apple,icestorm";
 			device_type = "cpu";
 			reg = <0x0 0x1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
 		};
 
-		cpu2: cpu@2 {
+		cpu_e2: cpu@2 {
 			compatible = "apple,icestorm";
 			device_type = "cpu";
 			reg = <0x0 0x2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
 		};
 
-		cpu3: cpu@3 {
+		cpu_e3: cpu@3 {
 			compatible = "apple,icestorm";
 			device_type = "cpu";
 			reg = <0x0 0x3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
 		};
 
-		cpu4: cpu@10100 {
+		cpu_p0: cpu@10100 {
 			compatible = "apple,firestorm";
 			device_type = "cpu";
 			reg = <0x0 0x10100>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
 		};
 
-		cpu5: cpu@10101 {
+		cpu_p1: cpu@10101 {
 			compatible = "apple,firestorm";
 			device_type = "cpu";
 			reg = <0x0 0x10101>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
 		};
 
-		cpu6: cpu@10102 {
+		cpu_p2: cpu@10102 {
 			compatible = "apple,firestorm";
 			device_type = "cpu";
 			reg = <0x0 0x10102>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
 		};
 
-		cpu7: cpu@10103 {
+		cpu_p3: cpu@10103 {
 			compatible = "apple,firestorm";
 			device_type = "cpu";
 			reg = <0x0 0x10103>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+	};
+
+	ecluster_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <972000000>;
+			opp-level = <2>;
+			clock-latency-ns = <22000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1332000000>;
+			opp-level = <3>;
+			clock-latency-ns = <27000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <4>;
+			clock-latency-ns = <33000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2064000000>;
+			opp-level = <5>;
+			clock-latency-ns = <50000>;
+		};
+	};
+
+	pcluster_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <8000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <828000000>;
+			opp-level = <2>;
+			clock-latency-ns = <19000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-level = <3>;
+			clock-latency-ns = <21000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1284000000>;
+			opp-level = <4>;
+			clock-latency-ns = <23000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-level = <5>;
+			clock-latency-ns = <24000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-level = <6>;
+			clock-latency-ns = <29000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1956000000>;
+			opp-level = <7>;
+			clock-latency-ns = <31000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2184000000>;
+			opp-level = <8>;
+			clock-latency-ns = <34000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2388000000>;
+			opp-level = <9>;
+			clock-latency-ns = <36000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2592000000>;
+			opp-level = <10>;
+			clock-latency-ns = <51000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2772000000>;
+			opp-level = <11>;
+			clock-latency-ns = <54000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <2988000000>;
+			opp-level = <12>;
+			clock-latency-ns = <55000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp13 {
+			opp-hz = /bits/ 64 <3096000000>;
+			opp-level = <13>;
+			clock-latency-ns = <55000>;
+			turbo-mode;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3144000000>;
+			opp-level = <14>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
 		};
+		opp15 {
+			opp-hz = /bits/ 64 <3204000000>;
+			opp-level = <15>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+#endif
 	};
 
 	timer {
@@ -116,6 +331,60 @@
 		clock-output-names = "clkref";
 	};
 
+	clk_120m: clock-120m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <120000000>;
+		clock-output-names = "clk_120m";
+	};
+
+	clk_200m: clock-200m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "clk_200m";
+	};
+
+	/*
+	 * This is a fabulated representation of the input clock
+	 * to NCO since we don't know the true clock tree.
+	 */
+	nco_clkref: clock-ref-nco {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "nco_ref";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpu_globals: globals {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_a: hw-cal-a {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_b: hw-cal-b {
+			status = "disabled";
+		};
+
+		uat_handoff: uat-handoff {
+			status = "disabled";
+		};
+
+		uat_pagetables: uat-pagetables {
+			status = "disabled";
+		};
+
+		uat_ttbs: uat-ttbs {
+			status = "disabled";
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -124,6 +393,114 @@
 		ranges;
 		nonposted-mmio;
 
+		gpu: gpu@206400000 {
+			compatible = "apple,agx-g13g";
+			reg = <0x2 0x6400000 0 0x40000>,
+				<0x2 0x4000000 0 0x1000000>;
+			reg-names = "asc", "sgx";
+			mboxes = <&agx_mbox>;
+			power-domains = <&ps_gfx>;
+			memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+					<&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+			memory-region-names = "ttbs", "pagetables", "handoff",
+					      "hw-cal-a", "hw-cal-b", "globals";
+
+			apple,firmware-abi = <0 0 0>;
+		};
+
+		agx_mbox: mbox@206408000 {
+			compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x6408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 575 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 576 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 577 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 578 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+		};
+
+		cpufreq_e: performance-controller@210e20000 {
+			compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x10e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		cpufreq_p: performance-controller@211e20000 {
+			compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x11e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		display_dfr: display-pipe@228200000 {
+			compatible = "apple,t8103-display-pipe", "apple,h7-display-pipe";
+			reg = <0x2 0x28200000 0x0 0xc000>,
+			      <0x2 0x28400000 0x0 0x4000>;
+			reg-names = "be", "fe";
+			power-domains = <&ps_dispdfr_fe>, <&ps_dispdfr_be>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 502 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 506 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "be", "fe";
+			iommus = <&displaydfr_dart 0>;
+			status = "disabled";
+
+			port {
+				dfr_adp_out_mipi: endpoint {
+					remote-endpoint = <&dfr_mipi_in_adp>;
+				};
+			};
+		};
+
+		displaydfr_dart: iommu@228304000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x2 0x28304000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 504 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_dispdfr_fe>;
+			status = "disabled";
+		};
+
+		displaydfr_mipi: dsi@228600000 {
+			compatible = "apple,t8103-display-pipe-mipi", "apple,h7-display-pipe-mipi";
+			reg = <0x2 0x28600000 0x0 0x100000>;
+			power-domains = <&ps_mipi_dsi>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dfr_mipi_in: port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dfr_mipi_in_adp: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&dfr_adp_out_mipi>;
+					};
+				};
+
+				dfr_mipi_out: port@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		sio_dart: iommu@235004000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x2 0x35004000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 635 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_sio_cpu>;
+		};
+
 		i2c0: i2c@235010000 {
 			compatible = "apple,t8103-i2c", "apple,i2c";
 			reg = <0x2 0x35010000 0x0 0x4000>;
@@ -191,6 +568,57 @@
 			status = "disabled"; /* only used in J293 */
 		};
 
+		fpwm1: pwm@235044000 {
+			compatible = "apple,t8103-fpwm", "apple,s5l-fpwm";
+			reg = <0x2 0x35044000 0x0 0x4000>;
+			power-domains = <&ps_fpwm1>;
+			clocks = <&clkref>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		spi0: spi@235100000 {
+			compatible = "apple,t8103-spi", "apple,spi";
+			reg = <0x2 0x35100000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 614 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_200m>;
+			pinctrl-0 = <&spi0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_spi0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@235104000 {
+			compatible = "apple,t8103-spi", "apple,spi";
+			reg = <0x2 0x35104000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 615 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_200m>;
+			pinctrl-0 = <&spi1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_spi1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi3: spi@23510c000 {
+			compatible = "apple,t8103-spi", "apple,spi";
+			reg = <0x2 0x3510c000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 617 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_120m>;
+			pinctrl-0 = <&spi3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_spi3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		serial0: serial@235200000 {
 			compatible = "apple,s5l-uart";
 			reg = <0x2 0x35200000 0x0 0x1000>;
@@ -219,6 +647,61 @@
 			status = "disabled";
 		};
 
+		admac: dma-controller@238200000 {
+			compatible = "apple,t8103-admac", "apple,admac";
+			reg = <0x2 0x38200000 0x0 0x34000>;
+			dma-channels = <24>;
+			interrupts-extended = <0>,
+					      <&aic AIC_IRQ 626 IRQ_TYPE_LEVEL_HIGH>,
+					      <0>,
+					      <0>;
+			#dma-cells = <1>;
+			iommus = <&sio_dart 2>;
+			power-domains = <&ps_sio_adma>;
+			resets = <&ps_audio_p>;
+		};
+
+		mca: i2s@238400000 {
+			compatible = "apple,t8103-mca", "apple,mca";
+			reg = <0x2 0x38400000 0x0 0x18000>,
+			      <0x2 0x38300000 0x0 0x30000>;
+
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 619 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 620 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 621 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 622 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 623 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 624 IRQ_TYPE_LEVEL_HIGH>;
+
+			resets = <&ps_audio_p>;
+			clocks = <&nco 0>, <&nco 1>, <&nco 2>,
+				 <&nco 3>, <&nco 4>, <&nco 4>;
+			power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+					<&ps_mca2>, <&ps_mca3>, <&ps_mca4>, <&ps_mca5>;
+			dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+			       <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+			       <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+			       <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>,
+			       <&admac 16>, <&admac 17>, <&admac 18>, <&admac 19>,
+			       <&admac 20>, <&admac 21>, <&admac 22>, <&admac 23>;
+			dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+				"tx1a", "rx1a", "tx1b", "rx1b",
+				"tx2a", "rx2a", "tx2b", "rx2b",
+				"tx3a", "rx3a", "tx3b", "rx3b",
+				"tx4a", "rx4a", "tx4b", "rx4b",
+				"tx5a", "rx5a", "tx5b", "rx5b";
+
+			#sound-dai-cells = <1>;
+		};
+
+		nco: clock-controller@23b044000 {
+			compatible = "apple,t8103-nco", "apple,nco";
+			reg = <0x2 0x3b044000 0x0 0x14000>;
+			clocks = <&nco_clkref>;
+			#clock-cells = <1>;
+		};
+
 		aic: interrupt-controller@23b100000 {
 			compatible = "apple,t8103-aic", "apple,aic";
 			#interrupt-cells = <3>;
@@ -229,12 +712,12 @@
 			affinities {
 				e-core-pmu-affinity {
 					apple,fiq-index = <AIC_CPU_PMU_E>;
-					cpus = <&cpu0 &cpu1 &cpu2 &cpu3>;
+					cpus = <&cpu_e0 &cpu_e1 &cpu_e2 &cpu_e3>;
 				};
 
 				p-core-pmu-affinity {
 					apple,fiq-index = <AIC_CPU_PMU_P>;
-					cpus = <&cpu4 &cpu5 &cpu6 &cpu7>;
+					cpus = <&cpu_p0 &cpu_p1 &cpu_p2 &cpu_p3>;
 				};
 			};
 		};
@@ -292,6 +775,26 @@
 					 <APPLE_PINMUX(134, 1)>;
 			};
 
+			spi0_pins: spi0-pins {
+				pinmux = <APPLE_PINMUX(67, 1)>, /* CLK */
+					<APPLE_PINMUX(68, 1)>,  /* MOSI */
+					<APPLE_PINMUX(69, 1)>;  /* MISO */
+			};
+
+			spi1_pins: spi1-pins {
+				pinmux = <APPLE_PINMUX(42, 1)>,
+					<APPLE_PINMUX(43, 1)>,
+					<APPLE_PINMUX(44, 1)>,
+					<APPLE_PINMUX(45, 1)>;
+			};
+
+			spi3_pins: spi3-pins {
+				pinmux = <APPLE_PINMUX(46, 1)>,
+					<APPLE_PINMUX(47, 1)>,
+					<APPLE_PINMUX(48, 1)>,
+					<APPLE_PINMUX(49, 1)>;
+			};
+
 			pcie_pins: pcie-pins {
 				pinmux = <APPLE_PINMUX(150, 1)>,
 					 <APPLE_PINMUX(151, 1)>,
@@ -299,6 +802,63 @@
 			};
 		};
 
+		nub_spmi: spmi@23d0d9300 {
+			compatible = "apple,t8103-spmi", "apple,spmi";
+			reg = <0x2 0x3d0d9300 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			pmic1: pmic@f {
+				compatible = "apple,sera-pmic", "apple,spmi-nvmem";
+				reg = <0xf SPMI_USID>;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					boot_stage: boot-stage@9f01 {
+						reg = <0x9f01 0x1>;
+					};
+
+					boot_error_count: boot-error-count@9f02,0 {
+						reg = <0x9f02 0x1>;
+						bits = <0 4>;
+					};
+
+					panic_count: panic-count@9f02,4 {
+						reg = <0x9f02 0x1>;
+						bits = <4 4>;
+					};
+
+					boot_error_stage: boot-error-stage@9f03 {
+						reg = <0x9f03 0x1>;
+					};
+
+					shutdown_flag: shutdown-flag@9f0f,3 {
+						reg = <0x9f0f 0x1>;
+						bits = <3 1>;
+					};
+
+					fault_shadow: fault-shadow@a67b {
+						reg = <0xa67b 0x10>;
+					};
+
+					socd: socd@ab00 {
+						reg = <0xab00 0x400>;
+					};
+
+					pm_setting: pm-setting@d001 {
+						reg = <0xd001 0x1>;
+					};
+
+					rtc_offset: rtc-offset@d100 {
+						reg = <0xd100 0x6>;
+					};
+				};
+			};
+		};
+
 		pinctrl_nub: pinctrl@23d1f0000 {
 			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3d1f0000 0x0 0x4000>;
@@ -336,6 +896,41 @@
 			interrupts = <AIC_IRQ 338 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		smc: smc@23e400000 {
+			compatible = "apple,t8103-smc", "apple,smc";
+			reg = <0x2 0x3e400000 0x0 0x4000>,
+				<0x2 0x3fe00000 0x0 0x100000>;
+			reg-names = "smc", "sram";
+			mboxes = <&smc_mbox>;
+
+			smc_gpio: gpio {
+				compatible = "apple,smc-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			smc_reboot: reboot {
+				compatible = "apple,smc-reboot";
+				nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+					<&boot_error_count>, <&panic_count>;
+				nvmem-cell-names = "shutdown_flag", "boot_stage",
+					"boot_error_count", "panic_count";
+			};
+		};
+
+		smc_mbox: mbox@23e408000 {
+			compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x3e408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 400 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 401 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 402 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 403 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+		};
+
 		pinctrl_smc: pinctrl@23e820000 {
 			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3e820000 0x0 0x4000>;
@@ -412,7 +1007,7 @@
 			resets = <&ps_ans2>;
 		};
 
-		pcie0_dart_0: dart@681008000 {
+		pcie0_dart_0: iommu@681008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x81008000 0x0 0x4000>;
 			#iommu-cells = <1>;
@@ -421,22 +1016,24 @@
 			power-domains = <&ps_apcie_gp>;
 		};
 
-		pcie0_dart_1: dart@682008000 {
+		pcie0_dart_1: iommu@682008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x82008000 0x0 0x4000>;
 			#iommu-cells = <1>;
 			interrupt-parent = <&aic>;
 			interrupts = <AIC_IRQ 699 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
 		};
 
-		pcie0_dart_2: dart@683008000 {
+		pcie0_dart_2: iommu@683008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x83008000 0x0 0x4000>;
 			#iommu-cells = <1>;
 			interrupt-parent = <&aic>;
 			interrupts = <AIC_IRQ 702 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
 		};
 
 		pcie0: pcie@690000000 {
@@ -511,6 +1108,7 @@
 						<0 0 0 2 &port01 0 0 0 1>,
 						<0 0 0 3 &port01 0 0 0 2>,
 						<0 0 0 4 &port01 0 0 0 3>;
+				status = "disabled";
 			};
 
 			port02: pci@2,0 {
@@ -530,6 +1128,7 @@
 						<0 0 0 2 &port02 0 0 0 1>,
 						<0 0 0 3 &port02 0 0 0 2>,
 						<0 0 0 4 &port02 0 0 0 3>;
+				status = "disabled";
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/apple/t8112-j413.dts b/arch/arm64/boot/dts/apple/t8112-j413.dts
new file mode 100644
index 000000000000..6f69658623bf
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-j413.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Air (M2, 2022)
+ *
+ * target-type: J413
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8112.dtsi"
+#include "t8112-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "apple,j413", "apple,t8112", "apple,arm-platform";
+	model = "Apple MacBook Air (13-inch, M2, 2022)";
+
+	aliases {
+		bluetooth0 = &bluetooth0;
+		wifi0 = &wifi0;
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4433";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+		apple,antenna-sku = "XX";
+		brcm,board-type = "apple,hokkaido";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f71";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
+		brcm,board-type = "apple,hokkaido";
+	};
+};
+
+&i2c0 {
+	/* MagSafe port */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&fpwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-j415.dts b/arch/arm64/boot/dts/apple/t8112-j415.dts
new file mode 100644
index 000000000000..b54e218e5384
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-j415.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Air (15-inch, M2, 2023)
+ *
+ * target-type: J415
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8112.dtsi"
+#include "t8112-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "apple,j415", "apple,t8112", "apple,arm-platform";
+	model = "Apple MacBook Air (15-inch, M2, 2023)";
+
+	aliases {
+		bluetooth0 = &bluetooth0;
+		wifi0 = &wifi0;
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4433";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+		apple,antenna-sku = "XX";
+		brcm,board-type = "apple,snake";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f71";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
+		brcm,board-type = "apple,snake";
+	};
+};
+
+&i2c0 {
+	/* MagSafe port */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&fpwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-j473.dts b/arch/arm64/boot/dts/apple/t8112-j473.dts
new file mode 100644
index 000000000000..06fe257f08be
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-j473.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple Mac mini (M2, 2023)
+ *
+ * target-type: J473
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8112.dtsi"
+#include "t8112-jxxx.dtsi"
+
+/ {
+	compatible = "apple,j473", "apple,t8112", "apple,arm-platform";
+	model = "Apple Mac mini (M2, 2023)";
+
+	aliases {
+		ethernet0 = &ethernet0;
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+};
+
+&port01 {
+	bus-range = <2 2>;
+	status = "okay";
+};
+
+&port02 {
+	bus-range = <3 3>;
+	status = "okay";
+	ethernet0: ethernet@0,0 {
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 00];
+	};
+};
+
+&pcie1_dart {
+	status = "okay";
+};
+
+&pcie2_dart {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-j493.dts b/arch/arm64/boot/dts/apple/t8112-j493.dts
new file mode 100644
index 000000000000..fb8ad7d4c65a
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-j493.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Pro (13-inch, M1, 2022)
+ *
+ * target-type: J493
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8112.dtsi"
+#include "t8112-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "apple,j493", "apple,t8112", "apple,arm-platform";
+	model = "Apple MacBook Pro (13-inch, M2, 2022)";
+
+	/*
+	 * All of those are used by the bootloader to pass calibration
+	 * blobs and other device-specific properties
+	 */
+	aliases {
+		bluetooth0 = &bluetooth0;
+		touchbar0 = &touchbar0;
+		wifi0 = &wifi0;
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+/*
+ * The driver depends on boot loader initialized state which resets when this
+ * power-domain is powered off. This happens on suspend or when the driver is
+ * missing during boot. Mark the domain as always on until the driver can
+ * handle this.
+ */
+&ps_dispdfr_be {
+	apple,always-on;
+};
+
+&display_dfr {
+	status = "okay";
+};
+
+&dfr_mipi_out {
+	dfr_mipi_out_panel: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&dfr_panel_in>;
+	};
+};
+
+&displaydfr_mipi {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	dfr_panel: panel@0 {
+		compatible = "apple,j493-summit", "apple,summit";
+		reg = <0>;
+		max-brightness = <255>;
+
+		port {
+			dfr_panel_in: endpoint {
+				remote-endpoint = <&dfr_mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&displaydfr_dart {
+	status = "okay";
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4425";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 00 00 00 00 00];
+		apple,antenna-sku = "XX";
+		brcm,board-type = "apple,kyushu";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f69";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
+		brcm,board-type = "apple,kyushu";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&fpwm1 {
+	status = "okay";
+};
+
+&spi3 {
+	status = "okay";
+
+	touchbar0: touchbar@0 {
+		compatible = "apple,j493-touchbar";
+		reg = <0>;
+		spi-max-frequency = <8000000>;
+		spi-cs-setup-delay-ns = <2000>;
+		spi-cs-hold-delay-ns = <2000>;
+		reset-gpios = <&pinctrl_ap 170 GPIO_ACTIVE_LOW>;
+		interrupts-extended = <&pinctrl_ap 174 IRQ_TYPE_EDGE_FALLING>;
+		firmware-name = "apple/dfrmtfw-j493.bin";
+		touchscreen-size-x = <23045>;
+		touchscreen-size-y = <640>;
+		touchscreen-inverted-y;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi
new file mode 100644
index 000000000000..6da35496a4c8
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple M2 MacBook Air/Pro (M2, 2022)
+ *
+ * This file contains parts common to all Apple M2 devices using the t8112.
+ *
+ * target-type: J493, J413
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+		serial2 = &serial2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&nco_clkref {
+	clock-frequency = <900000000>;
+};
+
+#include "spi1-nvram.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8112-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8112-pmgr.dtsi
new file mode 100644
index 000000000000..7c050c6f2707
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-pmgr.dtsi
@@ -0,0 +1,1140 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8112 "M2" SoC
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+
+&pmgr {
+	ps_sbr: power-controller@100 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Core device */
+	};
+
+	ps_aic: power-controller@108 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@110 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+		apple,always-on; /* Core device */
+	};
+
+	ps_soc_spmi0: power-controller@118 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_spmi0";
+	};
+
+	ps_gpio: power-controller@120 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms_busif: power-controller@128 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_busif";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pms: power-controller@130 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pms_c1ppt: power-controller@160 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_c1ppt";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_soc_dpe: power-controller@168 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_dpe";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pmgr_soc_ocla: power-controller@170 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmgr_soc_ocla";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_ispsens0: power-controller@178 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@180 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_ispsens2: power-controller@188 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens2";
+	};
+
+	ps_ispsens3: power-controller@190 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens3";
+	};
+
+	ps_pcie_ref: power-controller@198 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_aft0: power-controller@1a0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aft0";
+	};
+
+	ps_imx: power-controller@1a8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "imx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sio_busif: power-controller@1b0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio: power-controller@1b8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		apple,always-on;
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sio_cpu: power-controller@1c0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_cpu";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_fpwm0: power-controller@1c8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm0";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_fpwm1: power-controller@1d0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm1";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_fpwm2: power-controller@1d8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm2";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c0: power-controller@1e0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c1: power-controller@1e8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c2: power-controller@1f0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c3: power-controller@1f8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c4: power-controller@200 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c4";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_spi_p: power-controller@208 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_uart_p: power-controller@210 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_audio_p: power-controller@218 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "audio_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_aes: power-controller@220 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_spi0: power-controller@228 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi1: power-controller@230 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi2: power-controller@238 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi3: power-controller@240 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi4: power-controller@248 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi4";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi5: power-controller@250 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi5";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_uart_n: power-controller@258 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart_n";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart0: power-controller@260 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart1: power-controller@268 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart2: power-controller@270 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart3: power-controller@278 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart4: power-controller@280 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart5: power-controller@288 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart6: power-controller@290 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart7: power-controller@298 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart8: power-controller@2a0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_sio_adma: power-controller@2a8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_adma";
+		power-domains = <&ps_spi_p>, <&ps_audio_p>;
+	};
+
+	ps_dpa0: power-controller@2b0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa0";
+		power-domains = <&ps_audio_p>;
+	};
+
+	ps_dpa1: power-controller@2b8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa1";
+		power-domains = <&ps_audio_p>;
+	};
+
+	ps_mca0: power-controller@2c0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca1: power-controller@2c8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca2: power-controller@2d0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca3: power-controller@2d8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca4: power-controller@2e0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca5: power-controller@2e8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca5";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mcc: power-controller@2f0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory controller */
+	};
+
+	ps_dcs0: power-controller@2f8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@300 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@308 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@310 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs4: power-controller@318 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs4";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs5: power-controller@320 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs5";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs6: power-controller@328 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs6";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs7: power-controller@330 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs7";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_smx0: power-controller@338 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx0";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_smx1: power-controller@340 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx1";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_apcie: power-controller@348 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie";
+		power-domains = <&ps_imx>, <&ps_pcie_ref>;
+	};
+
+	ps_rmx0: power-controller@350 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rmx0";
+		/* Apple Fabric, display/image stuff: this can power down */
+	};
+
+	ps_rmx1: power-controller@358 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rmx1";
+		/* Apple Fabric, display/image stuff: this can power down */
+	};
+
+	ps_cmx: power-controller@360 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cmx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_mmx: power-controller@368 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mmx";
+		/* Apple Fabric, media stuff: this can power down */
+	};
+
+	ps_disp0_sys: power-controller@370 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x370 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_sys";
+		power-domains = <&ps_rmx1>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+	};
+
+	ps_disp0_fe: power-controller@378 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+		power-domains = <&ps_disp0_sys>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+	};
+
+	ps_dispext_sys: power-controller@380 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispext_sys";
+		power-domains = <&ps_rmx0>;
+	};
+
+	ps_dispext_fe: power-controller@388 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispext_fe";
+		power-domains = <&ps_dispext_sys>;
+	};
+
+	ps_dispext_cpu0: power-controller@3c8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispext_cpu0";
+		power-domains = <&ps_dispext_fe>;
+		apple,min-state = <4>;
+	};
+
+	ps_dptx_ext_phy: power-controller@3d8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dptx_ext_phy";
+	};
+
+	ps_dispdfr_fe: power-controller@3e0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispdfr_fe";
+		power-domains = <&ps_rmx0>;
+	};
+
+	ps_dispdfr_be: power-controller@3e8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispdfr_be";
+		power-domains = <&ps_dispdfr_fe>;
+	};
+
+	ps_mipi_dsi: power-controller@3f0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_dispdfr_be>;
+	};
+
+	ps_jpg: power-controller@3f8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_cmx>;
+	};
+
+	ps_apcie_gp: power-controller@400 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie_gp";
+		power-domains = <&ps_apcie>;
+		apple,always-on; /* Breaks things if shut down */
+	};
+
+	ps_msr: power-controller@408 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x408 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_imx>;
+	};
+
+	ps_pmp: power-controller@410 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x410 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+		apple,always-on;
+	};
+
+	ps_pms_sram: power-controller@418 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x418 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+		apple,always-on;
+	};
+
+	ps_msr_ase_core: power-controller@420 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x420 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr_ase_core";
+		power-domains = <&ps_msr>;
+	};
+
+	ps_ans: power-controller@428 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x428 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans";
+		power-domains = <&ps_imx>;
+	};
+
+	ps_gfx: power-controller@430 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x430 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_isp_sys: power-controller@438 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x438 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+		power-domains = <&ps_rmx1>;
+	};
+
+	ps_venc_sys: power-controller@440 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x440 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_rmx1>;
+	};
+
+	ps_avd_sys: power-controller@448 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x448 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "avd_sys";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_apcie_st: power-controller@450 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x450 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie_st";
+		power-domains = <&ps_apcie>, <&ps_ans>;
+	};
+
+	ps_atc0_common: power-controller@458 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x458 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_common";
+		power-domains = <&ps_imx>;
+	};
+
+	ps_atc0_pcie: power-controller@460 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x460 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_pcie";
+		power-domains = <&ps_atc0_common>;
+	};
+
+	ps_atc0_cio: power-controller@468 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x468 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio";
+		power-domains = <&ps_atc0_common>;
+	};
+
+	ps_atc0_cio_pcie: power-controller@470 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x470 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio_pcie";
+		power-domains = <&ps_atc0_cio>;
+	};
+
+	ps_atc0_cio_usb: power-controller@478 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x478 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio_usb";
+		power-domains = <&ps_atc0_cio>;
+	};
+
+	ps_atc1_common: power-controller@480 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x480 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_common";
+		power-domains = <&ps_rmx0>;
+	};
+
+	ps_atc1_pcie: power-controller@488 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x488 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_pcie";
+		power-domains = <&ps_atc1_common>;
+	};
+
+	ps_atc1_cio: power-controller@490 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x490 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio";
+		power-domains = <&ps_atc1_common>;
+	};
+
+	ps_atc1_cio_pcie: power-controller@498 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x498 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio_pcie";
+		power-domains = <&ps_atc1_cio>;
+	};
+
+	ps_atc1_cio_usb: power-controller@4a0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x4a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio_usb";
+		power-domains = <&ps_atc1_cio>;
+	};
+
+	ps_ane_sys: power-controller@4a8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x4a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ane_sys";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_scodec: power-controller@4b0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x4b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "scodec";
+		power-domains = <&ps_rmx0>;
+	};
+
+	ps_sep: power-controller@c00 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc00 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on;
+	};
+
+	ps_venc_dma: power-controller@8000 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_dma";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_pipe4: power-controller@8008 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+		power-domains = <&ps_venc_dma>;
+	};
+
+	ps_venc_pipe5: power-controller@8010 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+		power-domains = <&ps_venc_dma>;
+	};
+
+	ps_venc_me0: power-controller@8018 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+		power-domains = <&ps_venc_pipe5>, <&ps_venc_pipe4>;
+	};
+
+	ps_venc_me1: power-controller@8020 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+		power-domains = <&ps_venc_pipe5>, <&ps_venc_pipe4>;
+	};
+
+	ps_disp0_cpu0: power-controller@10000 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x10000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_cpu0";
+		power-domains = <&ps_disp0_fe>;
+		apple,min-state = <4>;
+	};
+};
+
+&pmgr_mini {
+
+	ps_debug_gated: power-controller@58 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x58 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug_gated";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_spmi0: power-controller@60 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x60 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_spmi0";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_spmi1: power-controller@68 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x68 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_spmi1";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_aon: power-controller@70 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x70 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_aon";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_msg: power-controller@78 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x78 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msg";
+	};
+
+	ps_nub_gpio: power-controller@80 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_gpio";
+		apple,always-on;
+	};
+
+	ps_atc0_usb_aon: power-controller@88 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_usb_aon";
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	ps_atc1_usb_aon: power-controller@90 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x90 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_usb_aon";
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	ps_atc0_usb: power-controller@98 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x98 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_usb";
+		power-domains = <&ps_atc0_usb_aon>, <&ps_atc0_common>;
+	};
+
+	ps_atc1_usb: power-controller@a0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_usb";
+		power-domains = <&ps_atc1_usb_aon>, <&ps_atc1_common>;
+	};
+
+	ps_nub_fabric: power-controller@a8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_fabric";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_sram: power-controller@b0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_sram";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_debug_switch: power-controller@b8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug_switch";
+		apple,always-on; /* Core AON device */
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8112.dtsi b/arch/arm64/boot/dts/apple/t8112.dtsi
new file mode 100644
index 000000000000..3f79878b25af
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112.dtsi
@@ -0,0 +1,1176 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T8112 "M2" SoC
+ *
+ * Other names: H14G
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	compatible = "apple,t8112", "apple,arm-platform";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		gpu = &gpu;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e0>;
+				};
+				core1 {
+					cpu = <&cpu_e1>;
+				};
+				core2 {
+					cpu = <&cpu_e2>;
+				};
+				core3 {
+					cpu = <&cpu_e3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p0>;
+				};
+				core1 {
+					cpu = <&cpu_p1>;
+				};
+				core2 {
+					cpu = <&cpu_p2>;
+				};
+				core3 {
+					cpu = <&cpu_p3>;
+				};
+			};
+		};
+
+		cpu_e0: cpu@0 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_e1: cpu@1 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_e2: cpu@2 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_e3: cpu@3 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_p0: cpu@10100 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		cpu_p1: cpu@10101 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		cpu_p2: cpu@10102 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10102>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		cpu_p3: cpu@10103 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10103>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+	};
+
+	ecluster_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-level = <2>;
+			clock-latency-ns = <20000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1284000000>;
+			opp-level = <3>;
+			clock-latency-ns = <22000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1752000000>;
+			opp-level = <4>;
+			clock-latency-ns = <30000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2004000000>;
+			opp-level = <5>;
+			clock-latency-ns = <35000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <2256000000>;
+			opp-level = <6>;
+			clock-latency-ns = <39000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2424000000>;
+			opp-level = <7>;
+			clock-latency-ns = <53000>;
+		};
+	};
+
+	pcluster_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp01 {
+			opp-hz = /bits/ 64 <660000000>;
+			opp-level = <1>;
+			clock-latency-ns = <9000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <924000000>;
+			opp-level = <2>;
+			clock-latency-ns = <19000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1188000000>;
+			opp-level = <3>;
+			clock-latency-ns = <22000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1452000000>;
+			opp-level = <4>;
+			clock-latency-ns = <24000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <5>;
+			clock-latency-ns = <26000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1968000000>;
+			opp-level = <6>;
+			clock-latency-ns = <28000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-level = <7>;
+			clock-latency-ns = <30000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-level = <8>;
+			clock-latency-ns = <33000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2568000000>;
+			opp-level = <9>;
+			clock-latency-ns = <34000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2724000000>;
+			opp-level = <10>;
+			clock-latency-ns = <36000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2868000000>;
+			opp-level = <11>;
+			clock-latency-ns = <41000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <2988000000>;
+			opp-level = <12>;
+			clock-latency-ns = <42000>;
+		};
+		opp13 {
+			opp-hz = /bits/ 64 <3096000000>;
+			opp-level = <13>;
+			clock-latency-ns = <44000>;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3204000000>;
+			opp-level = <14>;
+			clock-latency-ns = <46000>;
+		};
+		/* Not available until CPU deep sleep is implemented */
+#if 0
+		opp15 {
+			opp-hz = /bits/ 64 <3324000000>;
+			opp-level = <15>;
+			clock-latency-ns = <62000>;
+			turbo-mode;
+		};
+		opp16 {
+			opp-hz = /bits/ 64 <3408000000>;
+			opp-level = <16>;
+			clock-latency-ns = <62000>;
+			turbo-mode;
+		};
+		opp17 {
+			opp-hz = /bits/ 64 <3504000000>;
+			opp-level = <17>;
+			clock-latency-ns = <62000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-e {
+		compatible = "apple,blizzard-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-p {
+		compatible = "apple,avalanche-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	clk_200m: clock-200m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "clk_200m";
+	};
+
+	/*
+	 * This is a fabulated representation of the input clock
+	 * to NCO since we don't know the true clock tree.
+	 */
+	nco_clkref: clock-ref-nco {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "nco_ref";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpu_globals: globals {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_a: hw-cal-a {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_b: hw-cal-b {
+			status = "disabled";
+		};
+
+		uat_handoff: uat-handoff {
+			status = "disabled";
+		};
+
+		uat_pagetables: uat-pagetables {
+			status = "disabled";
+		};
+
+		uat_ttbs: uat-ttbs {
+			status = "disabled";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges;
+		nonposted-mmio;
+
+		gpu: gpu@206400000 {
+			compatible = "apple,agx-g14g";
+			reg = <0x2 0x6400000 0 0x40000>,
+				<0x2 0x4000000 0 0x1000000>;
+			reg-names = "asc", "sgx";
+			mboxes = <&agx_mbox>;
+			power-domains = <&ps_gfx>;
+			memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+					<&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+			memory-region-names = "ttbs", "pagetables", "handoff",
+					      "hw-cal-a", "hw-cal-b", "globals";
+
+			apple,firmware-abi = <0 0 0>;
+		};
+
+		agx_mbox: mbox@206408000 {
+			compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x6408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 709 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 710 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 711 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 712 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+		};
+
+		cpufreq_e: cpufreq@210e20000 {
+			compatible = "apple,t8112-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x10e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		cpufreq_p: cpufreq@211e20000 {
+			compatible = "apple,t8112-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x11e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		display_dfr: display-pipe@228200000 {
+			compatible = "apple,t8112-display-pipe", "apple,h7-display-pipe";
+			reg = <0x2 0x28200000 0x0 0xc000>,
+			      <0x2 0x28400000 0x0 0x4000>;
+			reg-names = "be", "fe";
+			power-domains = <&ps_dispdfr_fe>, <&ps_dispdfr_be>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 614 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 618 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "be", "fe";
+			iommus = <&displaydfr_dart 0>;
+			status = "disabled";
+
+			port {
+				dfr_adp_out_mipi: endpoint {
+					remote-endpoint = <&dfr_mipi_in_adp>;
+				};
+			};
+		};
+
+		displaydfr_dart: iommu@228304000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x2 0x28304000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 616 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_dispdfr_fe>;
+			status = "disabled";
+		};
+
+		displaydfr_mipi: dsi@228600000 {
+			compatible = "apple,t8112-display-pipe-mipi", "apple,h7-display-pipe-mipi";
+			reg = <0x2 0x28600000 0x0 0x100000>;
+			power-domains = <&ps_mipi_dsi>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dfr_mipi_in: port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dfr_mipi_in_adp: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&dfr_adp_out_mipi>;
+					};
+				};
+
+				dfr_mipi_out: port@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		sio_dart: iommu@235004000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x2 0x35004000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 769 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_sio_cpu>;
+		};
+
+		i2c0: i2c@235010000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x35010000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 761 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@235014000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x35014000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 762 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c1>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@235018000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x35018000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 763 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c2>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@23501c000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x3501c000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 764 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c3>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@235020000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x35020000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 765 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c4>;
+			status = "disabled";
+		};
+
+		fpwm1: pwm@235044000 {
+			compatible = "apple,t8112-fpwm", "apple,s5l-fpwm";
+			reg = <0x2 0x35044000 0x0 0x4000>;
+			power-domains = <&ps_fpwm1>;
+			clocks = <&clkref>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		spi1: spi@235104000 {
+			compatible = "apple,t8112-spi", "apple,spi";
+			reg = <0x2 0x35104000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 749 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_200m>;
+			pinctrl-0 = <&spi1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_spi1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi3: spi@23510c000 {
+			compatible = "apple,t8112-spi", "apple,spi";
+			reg = <0x2 0x3510c000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 751 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkref>;
+			pinctrl-0 = <&spi3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_spi3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled"; /* only used in J493 */
+		};
+
+		serial0: serial@235200000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x35200000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 739 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * TODO: figure out the clocking properly, there may
+			 * be a third selectable clock.
+			 */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		serial2: serial@235208000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x35208000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 741 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart2>;
+			status = "disabled";
+		};
+
+		admac: dma-controller@238200000 {
+			compatible = "apple,t8112-admac", "apple,admac";
+			reg = <0x2 0x38200000 0x0 0x34000>;
+			dma-channels = <24>;
+			interrupts-extended = <0>,
+					      <&aic AIC_IRQ 760 IRQ_TYPE_LEVEL_HIGH>,
+					      <0>,
+					      <0>;
+			#dma-cells = <1>;
+			iommus = <&sio_dart 2>;
+			power-domains = <&ps_sio_adma>;
+			resets = <&ps_audio_p>;
+		};
+
+		mca: i2s@238400000 {
+			compatible = "apple,t8112-mca", "apple,mca";
+			reg = <0x2 0x38400000 0x0 0x18000>,
+			      <0x2 0x38300000 0x0 0x30000>;
+
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 753 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 754 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 755 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 756 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 757 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 758 IRQ_TYPE_LEVEL_HIGH>;
+
+			resets = <&ps_audio_p>;
+			clocks = <&nco 0>, <&nco 1>, <&nco 2>,
+				 <&nco 3>, <&nco 4>, <&nco 4>;
+			power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+					<&ps_mca2>, <&ps_mca3>, <&ps_mca4>, <&ps_mca5>;
+			dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+			       <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+			       <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+			       <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>,
+			       <&admac 16>, <&admac 17>, <&admac 18>, <&admac 19>,
+			       <&admac 20>, <&admac 21>, <&admac 22>, <&admac 23>;
+			dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+				    "tx1a", "rx1a", "tx1b", "rx1b",
+				    "tx2a", "rx2a", "tx2b", "rx2b",
+				    "tx3a", "rx3a", "tx3b", "rx3b",
+				    "tx4a", "rx4a", "tx4b", "rx4b",
+				    "tx5a", "rx5a", "tx5b", "rx5b";
+
+			#sound-dai-cells = <1>;
+		};
+
+		nco: clock-controller@23b044000 {
+			compatible = "apple,t8112-nco", "apple,nco";
+			reg = <0x2 0x3b044000 0x0 0x14000>;
+			clocks = <&nco_clkref>;
+			#clock-cells = <1>;
+		};
+
+		aic: interrupt-controller@23b0c0000 {
+			compatible = "apple,t8112-aic", "apple,aic2";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x2 0x3b0c0000 0x0 0x8000>,
+				<0x2 0x3b0c8000 0x0 0x4>;
+			reg-names = "core", "event";
+			power-domains = <&ps_aic>;
+
+			affinities {
+				e-core-pmu-affinity {
+					apple,fiq-index = <AIC_CPU_PMU_E>;
+					cpus = <&cpu_e0 &cpu_e1 &cpu_e2 &cpu_e3>;
+				};
+
+				p-core-pmu-affinity {
+					apple,fiq-index = <AIC_CPU_PMU_P>;
+					cpus = <&cpu_p0 &cpu_p1 &cpu_p2 &cpu_p3>;
+				};
+			};
+		};
+
+		pmgr: power-management@23b700000 {
+			compatible = "apple,t8112-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2 0x3b700000 0 0x14000>;
+			/* child nodes are added in t8103-pmgr.dtsi */
+		};
+
+		pinctrl_ap: pinctrl@23c100000 {
+			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3c100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 213>;
+			apple,npins = <213>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 205 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(111, 1)>,
+					 <APPLE_PINMUX(110, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(113, 1)>,
+					 <APPLE_PINMUX(112, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(87, 1)>,
+					 <APPLE_PINMUX(86, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(54, 1)>,
+					 <APPLE_PINMUX(53, 1)>;
+			};
+
+			i2c4_pins: i2c4-pins {
+				pinmux = <APPLE_PINMUX(131, 1)>,
+					 <APPLE_PINMUX(130, 1)>;
+			};
+
+			spi1_pins: spi1-pins {
+				pinmux = <APPLE_PINMUX(46, 1)>,
+					<APPLE_PINMUX(47, 1)>,
+					<APPLE_PINMUX(48, 1)>,
+					<APPLE_PINMUX(49, 1)>;
+			};
+
+			spi3_pins: spi3-pins {
+				pinmux = <APPLE_PINMUX(93, 1)>,
+					<APPLE_PINMUX(94, 1)>,
+					<APPLE_PINMUX(95, 1)>,
+					<APPLE_PINMUX(96, 1)>;
+			};
+
+			pcie_pins: pcie-pins {
+				pinmux = <APPLE_PINMUX(162, 1)>,
+					 <APPLE_PINMUX(163, 1)>,
+					 <APPLE_PINMUX(164, 1)>;
+				// TODO: 1 more CLKREQs
+			};
+		};
+
+		pinctrl_nub: pinctrl@23d1f0000 {
+			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3d1f0000 0x0 0x4000>;
+			power-domains = <&ps_nub_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_nub 0 0 24>;
+			apple,npins = <24>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 371 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 372 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 373 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 376 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 377 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@23d280000 {
+			compatible = "apple,t8112-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2 0x3d280000 0 0x4000>;
+			/* child nodes are added in t8103-pmgr.dtsi */
+		};
+
+		wdt: watchdog@23d2b0000 {
+			compatible = "apple,t8112-wdt", "apple,wdt";
+			reg = <0x2 0x3d2b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 379 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nub_spmi: spmi@23d714000 {
+			compatible = "apple,t8112-spmi", "apple,spmi";
+			reg = <0x2 0x3d714000 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			pmic1: pmic@e {
+				compatible = "apple,stowe-pmic", "apple,spmi-nvmem";
+				reg = <0xe SPMI_USID>;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					fault_shadow: fault-shadow@867b {
+						reg = <0x867b 0x10>;
+					};
+
+					socd: socd@8b00 {
+						reg = <0x8b00 0x400>;
+					};
+
+					boot_stage: boot-stage@f701 {
+						reg = <0xf701 0x1>;
+					};
+
+					boot_error_count: boot-error-count@f702,0 {
+						reg = <0xf702 0x1>;
+						bits = <0 4>;
+					};
+
+					panic_count: panic-count@f702,4 {
+						reg = <0xf702 0x1>;
+						bits = <4 4>;
+					};
+
+					boot_error_stage: boot-error-stage@f703 {
+						reg = <0xf703 0x1>;
+					};
+
+					shutdown_flag: shutdown-flag@f70f,3 {
+						reg = <0xf70f 0x1>;
+						bits = <3 1>;
+					};
+
+					pm_setting: pm-setting@f801 {
+						reg = <0xf801 0x1>;
+					};
+
+					rtc_offset: rtc-offset@f900 {
+						reg = <0xf900 0x6>;
+					};
+				};
+			};
+		};
+
+		smc: smc@23e400000 {
+			compatible = "apple,t8112-smc", "apple,smc";
+			reg = <0x2 0x3e400000 0x0 0x4000>,
+				<0x2 0x3fe00000 0x0 0x100000>;
+			reg-names = "smc", "sram";
+			mboxes = <&smc_mbox>;
+
+			smc_gpio: gpio {
+				compatible = "apple,smc-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			smc_reboot: reboot {
+				compatible = "apple,smc-reboot";
+				nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+					<&boot_error_count>, <&panic_count>;
+				nvmem-cell-names = "shutdown_flag", "boot_stage",
+					"boot_error_count", "panic_count";
+			};
+		};
+
+		smc_mbox: mbox@23e408000 {
+			compatible = "apple,t8112-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x3e408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 499 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 500 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 501 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 502 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+		};
+
+		pinctrl_smc: pinctrl@23e820000 {
+			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3e820000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_smc 0 0 18>;
+			apple,npins = <18>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 490 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 491 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 492 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 493 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 494 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 495 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 496 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_aop: pinctrl@24a820000 {
+			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x4a820000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 54>;
+			apple,npins = <54>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 307 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ans_mbox: mbox@277408000 {
+			compatible = "apple,t8112-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x77408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 717 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 718 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 719 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 720 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+			power-domains = <&ps_ans>;
+		};
+
+		sart: sart@27bc50000 {
+			compatible = "apple,t8112-sart", "apple,t6000-sart";
+			reg = <0x2 0x7bc50000 0x0 0x10000>;
+			power-domains = <&ps_ans>;
+		};
+
+		nvme@27bcc0000 {
+			compatible = "apple,t8112-nvme-ans2", "apple,nvme-ans2";
+			reg = <0x2 0x7bcc0000 0x0 0x40000>,
+				<0x2 0x77400000 0x0 0x4000>;
+			reg-names = "nvme", "ans";
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 724 IRQ_TYPE_LEVEL_HIGH>;
+			mboxes = <&ans_mbox>;
+			apple,sart = <&sart>;
+			power-domains = <&ps_ans>, <&ps_apcie_st>;
+			power-domain-names = "ans", "apcie0";
+			resets = <&ps_ans>;
+		};
+
+		pcie0_dart: iommu@681008000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x6 0x81008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 782 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+		};
+
+		pcie1_dart: iommu@682008000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x6 0x82008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 785 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
+		};
+
+		pcie2_dart: iommu@683008000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x6 0x83008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 788 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
+		};
+
+		pcie3_dart: iommu@684008000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x6 0x84008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 791 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
+		};
+
+		pcie0: pcie@690000000 {
+			compatible = "apple,t8112-pcie", "apple,pcie";
+			device_type = "pci";
+
+			reg = <0x6 0x90000000 0x0 0x1000000>,
+			      <0x6 0x80000000 0x0 0x100000>,
+			      <0x6 0x81000000 0x0 0x4000>,
+			      <0x6 0x82000000 0x0 0x4000>,
+			      <0x6 0x83000000 0x0 0x4000>,
+			      <0x6 0x84000000 0x0 0x4000>;
+			reg-names = "config", "rc", "port0", "port1", "port2", "port3";
+
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 781 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 784 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 787 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 790 IRQ_TYPE_LEVEL_HIGH>;
+
+			msi-controller;
+			msi-parent = <&pcie0>;
+			msi-ranges = <&aic AIC_IRQ 793 IRQ_TYPE_EDGE_RISING 32>;
+
+			iommu-map = <0x100 &pcie0_dart 0 1>,
+				    <0x200 &pcie1_dart 1 1>,
+				    <0x300 &pcie2_dart 2 1>,
+				    <0x400 &pcie3_dart 3 1>;
+			iommu-map-mask = <0xff00>;
+
+			bus-range = <0 4>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>,
+				 <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>;
+
+			power-domains = <&ps_apcie_gp>;
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+
+			port00: pci@0,0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 166 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port00 0 0 0 0>,
+						<0 0 0 2 &port00 0 0 0 1>,
+						<0 0 0 3 &port00 0 0 0 2>,
+						<0 0 0 4 &port00 0 0 0 3>;
+			};
+
+			port01: pci@1,0 {
+				device_type = "pci";
+				reg = <0x800 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 167 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port01 0 0 0 0>,
+						<0 0 0 2 &port01 0 0 0 1>,
+						<0 0 0 3 &port01 0 0 0 2>,
+						<0 0 0 4 &port01 0 0 0 3>;
+
+				status = "disabled";
+			};
+
+			port02: pci@2,0 {
+				device_type = "pci";
+				reg = <0x1000 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 168 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port02 0 0 0 0>,
+						<0 0 0 2 &port02 0 0 0 1>,
+						<0 0 0 3 &port02 0 0 0 2>,
+						<0 0 0 4 &port02 0 0 0 3>;
+
+				status = "disabled";
+			};
+
+			/* TODO: GPIO unknown */
+			port03: pci@3,0 {
+				device_type = "pci";
+				reg = <0x1800 0x0 0x0 0x0 0x0>;
+				//reset-gpios = <&pinctrl_ap 33 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port03 0 0 0 0>,
+						<0 0 0 2 &port03 0 0 0 1>,
+						<0 0 0 3 &port03 0 0 0 2>,
+						<0 0 0 4 &port03 0 0 0 3>;
+
+				status = "disabled";
+			};
+		};
+	};
+};
+
+#include "t8112-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
index d908e96d7ddc..f30ee045dc95 100644
--- a/arch/arm64/boot/dts/arm/Makefile
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -7,3 +7,4 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += fvp-base-revc.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += corstone1000-fvp.dtb corstone1000-mps3.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += morello-sdp.dtb morello-fvp.dtb
diff --git a/arch/arm64/boot/dts/arm/corstone1000-fvp.dts b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
index 26b0f1b3cea6..66ba6b027193 100644
--- a/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
+++ b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 /*
  * Copyright (c) 2022, Arm Limited. All rights reserved.
  * Copyright (c) 2022, Linaro Limited. All rights reserved.
@@ -21,7 +21,7 @@
 		reg-io-width = <2>;
 	};
 
-	vmmc_v3_3d: fixed_v3_3d {
+	vmmc_v3_3d: regulator-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc_supply";
 		regulator-min-microvolt = <3300000>;
@@ -49,3 +49,29 @@
 		clock-names = "smclk", "apb_pclk";
 	};
 };
+
+&cpus {
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a35";
+		reg = <0x1>;
+		enable-method = "psci";
+		next-level-cache = <&L2_0>;
+	};
+
+	cpu2: cpu@2 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a35";
+		reg = <0x2>;
+		enable-method = "psci";
+		next-level-cache = <&L2_0>;
+	};
+
+	cpu3: cpu@3 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a35";
+		reg = <0x3>;
+		enable-method = "psci";
+		next-level-cache = <&L2_0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/corstone1000-mps3.dts b/arch/arm64/boot/dts/arm/corstone1000-mps3.dts
index e3146747c2d9..10d265be0c02 100644
--- a/arch/arm64/boot/dts/arm/corstone1000-mps3.dts
+++ b/arch/arm64/boot/dts/arm/corstone1000-mps3.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 /*
  * Copyright (c) 2022, Arm Limited. All rights reserved.
  * Copyright (c) 2022, Linaro Limited. All rights reserved.
diff --git a/arch/arm64/boot/dts/arm/corstone1000.dtsi b/arch/arm64/boot/dts/arm/corstone1000.dtsi
index 4e46826f883a..f35a5c96f3da 100644
--- a/arch/arm64/boot/dts/arm/corstone1000.dtsi
+++ b/arch/arm64/boot/dts/arm/corstone1000.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 /*
  * Copyright (c) 2022, Arm Limited. All rights reserved.
  * Copyright (c) 2022, Linaro Limited. All rights reserved.
@@ -21,7 +21,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	cpus {
+	cpus: cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -29,6 +29,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a35";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&L2_0>;
 		};
 	};
@@ -43,30 +44,31 @@
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
-		reg =	<0x1c010000 0x1000>,
-			<0x1c02f000 0x2000>,
-			<0x1c04f000 0x1000>,
-			<0x1c06f000 0x2000>;
+		reg = <0x1c010000 0x1000>,
+		      <0x1c02f000 0x2000>,
+		      <0x1c04f000 0x1000>,
+		      <0x1c06f000 0x2000>;
 		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) |
 			      IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	L2_0: l2-cache0 {
 		compatible = "cache";
+		cache-unified;
 		cache-level = <2>;
 		cache-size = <0x80000>;
 		cache-line-size = <64>;
 		cache-sets = <1024>;
 	};
 
-	refclk100mhz: refclk100mhz {
+	refclk100mhz: clock-100000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "apb_pclk";
 	};
 
-	smbclk: refclk24mhzx2 {
+	smbclk: clock-48000000 {
 		/* Reference 24MHz clock x 2 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -76,17 +78,13 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts =	<GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
-				 IRQ_TYPE_LEVEL_LOW)>,
-				<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
-				 IRQ_TYPE_LEVEL_LOW)>,
-				<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) |
-				 IRQ_TYPE_LEVEL_LOW)>,
-				<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) |
-				 IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	uartclk: uartclk {
+	uartclk: clock-50000000 {
 		/* UART clock - 50MHz */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -111,7 +109,6 @@
 			reg = <0x1a220000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			clock-frequency = <50000000>;
 			ranges;
 
 			frame@1a230000 {
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi
index e4a3c7dbcc20..17fba3bc99cd 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi
+++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi
@@ -12,11 +12,11 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x2f000000 0x100000>;
 		interrupt-controller;
-		reg =	<0x0 0x2f000000 0x0 0x10000>,
-			<0x0 0x2f100000 0x0 0x200000>,
-			<0x0 0x2c000000 0x0 0x2000>,
-			<0x0 0x2c010000 0x0 0x2000>,
-			<0x0 0x2c02f000 0x0 0x2000>;
+		reg = <0x0 0x2f000000 0x0 0x10000>,
+		      <0x0 0x2f100000 0x0 0x200000>,
+		      <0x0 0x2c000000 0x0 0x2000>,
+		      <0x0 0x2c010000 0x0 0x2000>,
+		      <0x0 0x2c02f000 0x0 0x2000>;
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
 		its: msi-controller@2f020000 {
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
index 83e3e7e3984f..a4b2b78d4df3 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -18,7 +18,9 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	chosen { };
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 
 	aliases {
 		serial0 = &v2m_serial0;
@@ -58,6 +60,8 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -73,7 +77,6 @@
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <100000000>;
 	};
 
 	pmu {
@@ -84,6 +87,11 @@
 			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	spe-pmu {
+		compatible = "arm,statistical-profiling-extension-v1";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	watchdog@2a440000 {
 		compatible = "arm,sbsa-gwdt";
 		reg = <0x0 0x2a440000 0 0x1000>,
@@ -92,21 +100,21 @@
 		timeout-sec = <30>;
 	};
 
-	v2m_clk24mhz: clk24mhz {
+	v2m_clk24mhz: clock-24000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 		clock-output-names = "v2m:clk24mhz";
 	};
 
-	v2m_refclk1mhz: refclk1mhz {
+	v2m_refclk1mhz: clock-1000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <1000000>;
 		clock-output-names = "v2m:refclk1mhz";
 	};
 
-	v2m_refclk32khz: refclk32khz {
+	v2m_refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
index 5f6f30c801a7..68a69f17e93d 100644
--- a/arch/arm64/boot/dts/arm/fvp-base-revc.dts
+++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
@@ -24,7 +24,9 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	chosen { };
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 
 	aliases {
 		serial0 = &v2m_serial0;
@@ -42,59 +44,164 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <40>;
+				exit-latency-us = <100>;
+				min-residency-us = <150>;
+				status = "disabled";
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1000>;
+				min-residency-us = <2500>;
+				status = "disabled";
+			};
+		};
+
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x000>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu4: cpu@10000 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x10000>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu5: cpu@10100 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x10100>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu6: cpu@10200 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x10200>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu7: cpu@10300 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x10300>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		};
+		C0_L2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		C1_L2: l2-cache1 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
 	memory@80000000 {
 		device_type = "memory";
-		reg = <0x00000000 0x80000000 0 0x80000000>,
+		reg = <0x00000000 0x80000000 0 0x7c000000>,
 		      <0x00000008 0x80000000 0 0x80000000>;
 	};
 
@@ -142,6 +249,19 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
 
+	timer@2a810000 {
+		compatible = "arm,armv7-timer-mem";
+		reg = <0x0 0x2a810000 0x0 0x10000>;
+		ranges = <0 0x0 0x2a820000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		frame@2a830000 {
+			frame-number = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x10000 0x10000>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -152,13 +272,67 @@
 		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	ete-0 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu0>;
+		status = "disabled";
+	};
+
+	ete-1 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu1>;
+		status = "disabled";
+	};
+
+	ete-2 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu2>;
+		status = "disabled";
+	};
+
+	ete-3 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu3>;
+		status = "disabled";
+	};
+
+	ete-4 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu4>;
+		status = "disabled";
+	};
+
+	ete-5 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu5>;
+		status = "disabled";
+	};
+
+	ete-6 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu6>;
+		status = "disabled";
+	};
+
+	ete-7 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu7>;
+		status = "disabled";
+	};
+
+	trbe {
+		compatible = "arm,trace-buffer-extension";
+		interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+	};
+
 	pci: pci@40000000 {
 		#address-cells = <0x3>;
 		#size-cells = <0x2>;
 		#interrupt-cells = <0x1>;
 		compatible = "pci-host-ecam-generic";
 		device_type = "pci";
-		bus-range = <0x0 0x1>;
+		bus-range = <0x0 0xff>;
 		reg = <0x0 0x40000000 0x0 0x10000000>;
 		ranges = <0x2000000 0x0 0x50000000 0x0 0x50000000 0x0 0x10000000>;
 		interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
@@ -170,6 +344,7 @@
 		iommu-map = <0x0 &smmu 0x0 0x10000>;
 
 		dma-coherent;
+		ats-supported;
 	};
 
 	smmu: iommu@2b400000 {
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 8d0d45d168d1..9ccb80821bdb 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -10,7 +10,6 @@
 	memtimer: timer@2a810000 {
 		compatible = "arm,armv7-timer-mem";
 		reg = <0x0 0x2a810000 0x0 0x10000>;
-		clock-frequency = <50000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x0 0x2a820000 0x20000>;
@@ -26,7 +25,8 @@
 		compatible = "arm,mhu", "arm,primecell";
 		reg = <0x0 0x2b1f0000 0x0 0x1000>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		#mbox-cells = <1>;
 		clocks = <&soc_refclk100mhz>;
 		clock-names = "apb_pclk";
@@ -662,7 +662,6 @@
 		dma-coherent;
 		/* The SMMU is only really of interest to bare-metal hypervisors */
 		/* iommus = <&smmu_gpu 0>; */
-		status = "disabled";
 	};
 
 	sram: sram@2e000000 {
@@ -746,40 +745,54 @@
 	};
 
 	thermal-zones {
-		pmic {
+		pmic-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 0>;
+			trips {
+				pmic_crit0: trip0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
-		soc {
+		soc-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 3>;
+			trips {
+				soc_crit0: trip0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
-		big_cluster_thermal_zone: big-cluster {
+		big_cluster_thermal_zone: big-cl-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 21>;
 			status = "disabled";
 		};
 
-		little_cluster_thermal_zone: little-cluster {
+		little_cluster_thermal_zone: little-cl-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 22>;
 			status = "disabled";
 		};
 
-		gpu0_thermal_zone: gpu0 {
+		gpu0_thermal_zone: gpu0-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 23>;
 			status = "disabled";
 		};
 
-		gpu1_thermal_zone: gpu1 {
+		gpu1_thermal_zone: gpu1-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 24>;
diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
index 2870b5eeb198..6d7d88e9591a 100644
--- a/arch/arm64/boot/dts/arm/juno-clocks.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
@@ -8,35 +8,35 @@
  */
 / {
 	/* SoC fixed clocks */
-	soc_uartclk: refclk7372800hz {
+	soc_uartclk: clock-7372800 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <7372800>;
 		clock-output-names = "juno:uartclk";
 	};
 
-	soc_usb48mhz: clk48mhz {
+	soc_usb48mhz: clock-48000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
 		clock-output-names = "clk48mhz";
 	};
 
-	soc_smc50mhz: clk50mhz {
+	soc_smc50mhz: clock-50000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 		clock-output-names = "smc_clk";
 	};
 
-	soc_refclk100mhz: refclk100mhz {
+	soc_refclk100mhz: clock-100000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "apb_pclk";
 	};
 
-	soc_faxiclk: refclk400mhz {
+	soc_faxiclk: clock-400000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <400000000>;
diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
index ba88d1596f6f..09d2b692e9e1 100644
--- a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
@@ -67,7 +67,6 @@
 			port@0 {
 				reg = <0>;
 				csys2_funnel_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&etf0_out_port>;
 				};
 			};
@@ -75,7 +74,6 @@
 			port@1 {
 				reg = <1>;
 				csys2_funnel_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint = <&etf1_out_port>;
 				};
 			};
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index be42932f7e21..ffa4ba4f1fbc 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -8,35 +8,35 @@
  */
 
 / {
-	mb_clk24mhz: clk24mhz {
+	mb_clk24mhz: clock-24000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 		clock-output-names = "juno_mb:clk24mhz";
 	};
 
-	mb_clk25mhz: clk25mhz {
+	mb_clk25mhz: clock-25000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 		clock-output-names = "juno_mb:clk25mhz";
 	};
 
-	v2m_refclk1mhz: refclk1mhz {
+	v2m_refclk1mhz: clock-1000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <1000000>;
 		clock-output-names = "juno_mb:refclk1mhz";
 	};
 
-	v2m_refclk32khz: refclk32khz {
+	v2m_refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 		clock-output-names = "juno_mb:refclk32khz";
 	};
 
-	mb_fixed_3v3: mcc-sb-3v3 {
+	mb_fixed_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "MCC_SB_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -158,7 +158,8 @@
 				};
 
 				apbregs@10000 {
-					compatible = "syscon", "simple-mfd";
+					compatible = "arm,juno-fpga-apb-regs",
+						     "syscon", "simple-mfd";
 					reg = <0x010000 0x1000>;
 					ranges = <0x0 0x10000 0x1000>;
 					#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
index 6451c62146fd..1d90eeebb37d 100644
--- a/arch/arm64/boot/dts/arm/juno-r1.dts
+++ b/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -189,6 +189,7 @@
 
 		A57_L2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
@@ -197,6 +198,7 @@
 
 		A53_L2: l2-cache1 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts
index 438cd1ff4bd0..d2ada69b0a43 100644
--- a/arch/arm64/boot/dts/arm/juno-r2.dts
+++ b/arch/arm64/boot/dts/arm/juno-r2.dts
@@ -195,6 +195,7 @@
 
 		A72_L2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
@@ -203,6 +204,7 @@
 
 		A53_L2: l2-cache1 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dtsi b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
index ec85cd2c733c..f38c5b6ef657 100644
--- a/arch/arm64/boot/dts/arm/juno-scmi.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
@@ -76,27 +76,27 @@
 	};
 
 	thermal-zones {
-		pmic {
+		pmic-thermal {
 			thermal-sensors = <&scmi_sensors0 0>;
 		};
 
-		soc {
+		soc-thermal {
 			thermal-sensors = <&scmi_sensors0 3>;
 		};
 
-		big-cluster {
+		big-cl-thermal {
 			thermal-sensors = <&scmi_sensors0 21>;
 		};
 
-		little-cluster {
+		little-cl-thermal {
 			thermal-sensors = <&scmi_sensors0 22>;
 		};
 
-		gpu0 {
+		gpu0-thermal {
 			thermal-sensors = <&scmi_sensors0 23>;
 		};
 
-		gpu1 {
+		gpu1-thermal {
 			thermal-sensors = <&scmi_sensors0 24>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
index cf4a58211399..5e48a01a5b9f 100644
--- a/arch/arm64/boot/dts/arm/juno.dts
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -194,6 +194,7 @@
 
 		A57_L2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
@@ -202,6 +203,7 @@
 
 		A53_L2: l2-cache1 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
diff --git a/arch/arm64/boot/dts/arm/morello-fvp.dts b/arch/arm64/boot/dts/arm/morello-fvp.dts
new file mode 100644
index 000000000000..2072c0b72325
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/morello-fvp.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021-2024, Arm Limited. All rights reserved.
+ */
+
+/dts-v1/;
+#include "morello.dtsi"
+
+/ {
+	model = "Arm Morello Fixed Virtual Platform";
+	compatible = "arm,morello-fvp", "arm,morello";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	bp_refclock24mhz: clock-24000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "bp:clock24mhz";
+	};
+
+	block_0: virtio_block@1c170000 {
+		compatible = "virtio,mmio";
+		reg = <0x0 0x1c170000 0x0 0x200>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	net_0: virtio_net@1c180000 {
+		compatible = "virtio,mmio";
+		reg = <0x0 0x1c180000 0x0 0x200>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	rng_0: virtio_rng@1c190000 {
+		compatible = "virtio,mmio";
+		reg = <0x0 0x1c190000 0x0 0x200>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	p9_0: virtio_p9@1c1a0000 {
+		compatible = "virtio,mmio";
+		reg = <0x0 0x1c1a0000 0x0 0x200>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	kmi_0: kmi@1c150000 {
+		compatible = "arm,pl050", "arm,primecell";
+		reg = <0x0 0x1c150000 0x0 0x1000>;
+		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bp_refclock24mhz>, <&bp_refclock24mhz>;
+		clock-names = "KMIREFCLK", "apb_pclk";
+	};
+
+	kmi_1: kmi@1c160000 {
+		compatible = "arm,pl050", "arm,primecell";
+		reg = <0x0 0x1c160000 0x0 0x1000>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bp_refclock24mhz>, <&bp_refclock24mhz>;
+		clock-names = "KMIREFCLK", "apb_pclk";
+	};
+
+	eth_0: ethernet@1d100000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x0 0x1d100000 0x0 0x10000>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/arm/morello-sdp.dts b/arch/arm64/boot/dts/arm/morello-sdp.dts
new file mode 100644
index 000000000000..cee49dee7571
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/morello-sdp.dts
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021-2024, Arm Limited. All rights reserved.
+ */
+
+/dts-v1/;
+#include "morello.dtsi"
+
+/ {
+	model = "Arm Morello System Development Platform";
+	compatible = "arm,morello-sdp", "arm,morello";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dpu_aclk: clock-350000000 {
+		/* 77.1 MHz derived from 24 MHz reference clock */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <350000000>;
+		clock-output-names = "aclk";
+	};
+
+	dpu_pixel_clk: clock-148500000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+		clock-output-names = "pxclk";
+	};
+
+	i2c0: i2c@1c0f0000 {
+		compatible = "cdns,i2c-r1p14";
+		reg = <0x0 0x1c0f0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&dpu_aclk>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clock-frequency = <100000>;
+
+		hdmi_tx: hdmi-transmitter@70 {
+			compatible = "nxp,tda998x";
+			reg = <0x70>;
+			video-ports = <0x234501>;
+			port {
+				tda998x_0_input: endpoint {
+					remote-endpoint = <&dp_pl0_out0>;
+				};
+			};
+		};
+	};
+
+	dp0: display@2cc00000 {
+		compatible = "arm,mali-d32", "arm,mali-d71";
+		reg = <0x0 0x2cc00000 0x0 0x20000>;
+		interrupts = <0 69 4>;
+		clocks = <&dpu_aclk>;
+		clock-names = "aclk";
+		iommus = <&smmu_dp 0>, <&smmu_dp 1>, <&smmu_dp 2>, <&smmu_dp 3>,
+			 <&smmu_dp 8>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pl0: pipeline@0 {
+			reg = <0>;
+			clocks = <&dpu_pixel_clk>;
+			clock-names = "pxclk";
+			port {
+				dp_pl0_out0: endpoint {
+					remote-endpoint = <&tda998x_0_input>;
+				};
+			};
+		};
+	};
+
+	smmu_ccix: iommu@4f000000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x0 0x4f000000 0x0 0x40000>;
+
+		interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 230 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 229 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+		msi-parent = <&its1 0>;
+		#iommu-cells = <1>;
+		dma-coherent;
+	};
+
+	smmu_pcie: iommu@4f400000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x0 0x4f400000 0x0 0x40000>;
+
+		interrupts = <GIC_SPI 235 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 237 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+		msi-parent = <&its2 0>;
+		#iommu-cells = <1>;
+		dma-coherent;
+	};
+
+	pcie_ctlr: pcie@28c0000000 {
+		device_type = "pci";
+		compatible = "pci-host-ecam-generic";
+		reg = <0x28 0xC0000000 0 0x10000000>;
+		ranges = <0x01000000 0x00 0x00000000 0x00 0x6f000000 0x00 0x00800000>,
+				<0x02000000 0x00 0x60000000 0x00 0x60000000 0x00 0x0f000000>,
+				<0x42000000 0x09 0x00000000 0x09 0x00000000 0x1f 0xc0000000>;
+		bus-range = <0 255>;
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		dma-coherent;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic 0 0 0 170 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic 0 0 0 171 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic 0 0 0 172 IRQ_TYPE_LEVEL_HIGH>;
+		msi-map = <0 &its_pcie 0 0x10000>;
+		iommu-map = <0 &smmu_pcie 0 0x10000>;
+	};
+
+	ccix_pcie_ctlr: pcie@4fc0000000 {
+		device_type = "pci";
+		compatible = "pci-host-ecam-generic";
+		reg = <0x4f 0xC0000000 0 0x10000000>;
+		ranges = <0x01000000 0x00 0x00000000 0x00 0x7f000000 0x00 0x00800000>,
+				<0x02000000 0x00 0x70000000 0x00 0x70000000 0x00 0x0f000000>,
+				<0x42000000 0x30 0x00000000 0x30 0x00000000 0x1f 0xc0000000>;
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		dma-coherent;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &gic 0 0 0 201 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic 0 0 0 202 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic 0 0 0 203 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic 0 0 0 204 IRQ_TYPE_LEVEL_HIGH>;
+		msi-map = <0 &its_ccix 0 0x10000>;
+		iommu-map = <0 &smmu_ccix 0 0x10000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/arm/morello.dtsi b/arch/arm64/boot/dts/arm/morello.dtsi
new file mode 100644
index 000000000000..5bc1c725dc86
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/morello.dtsi
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2024, Arm Limited. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc_refclk50mhz: clock-50000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "apb_pclk";
+	};
+
+	soc_refclk85mhz: clock-85000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <85000000>;
+		clock-output-names = "iofpga:aclk";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,rainier";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			/* 4 ways set associative */
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <512>;
+			next-level-cache = <&l2_0>;
+			clocks = <&scmi_dvfs 0>;
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				/* 8 ways set associative */
+				cache-size = <0x100000>;
+				cache-line-size = <64>;
+				cache-sets = <2048>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,rainier";
+			reg = <0x0 0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			/* 4 ways set associative */
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <512>;
+			next-level-cache = <&l2_1>;
+			clocks = <&scmi_dvfs 0>;
+
+			l2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				/* 8 ways set associative */
+				cache-size = <0x100000>;
+				cache-line-size = <64>;
+				cache-sets = <2048>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu2: cpu@10000 {
+			compatible = "arm,rainier";
+			reg = <0x0 0x10000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			/* 4 ways set associative */
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <512>;
+			next-level-cache = <&l2_2>;
+			clocks = <&scmi_dvfs 1>;
+
+			l2_2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				/* 8 ways set associative */
+				cache-size = <0x100000>;
+				cache-line-size = <64>;
+				cache-sets = <2048>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu3: cpu@10100 {
+			compatible = "arm,rainier";
+			reg = <0x0 0x10100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			/* 4 ways set associative */
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <512>;
+			next-level-cache = <&l2_3>;
+			clocks = <&scmi_dvfs 1>;
+
+			l2_3: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				/* 8 ways set associative */
+				cache-size = <0x100000>;
+				cache-line-size = <64>;
+				cache-sets = <2048>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <0x100000>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		interrupt-parent = <&gic>;
+
+		scmi {
+			compatible = "arm,scmi";
+			mbox-names = "tx", "rx";
+			mboxes = <&mailbox 1 0>, <&mailbox 1 1>;
+			shmem = <&cpu_scp_hpri0>, <&cpu_scp_hpri1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_dvfs: protocol@13 {
+				reg = <0x13>;
+				#clock-cells = <1>;
+			};
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+
+	/* The first bank of memory, memory map is actually provided by UEFI. */
+	memory@80000000 {
+		device_type = "memory";
+		/* [0x80000000-0xffffffff] */
+		reg = <0x00000000 0x80000000 0x0 0x7f000000>;
+	};
+
+	memory@8080000000 {
+		device_type = "memory";
+		/* [0x8080000000-0x83f7ffffff] */
+		reg = <0x00000080 0x80000000 0x3 0x78000000>;
+	};
+
+	pmu {
+		compatible = "arm,rainier-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure-firmware@ff000000 {
+			reg = <0x0 0xff000000 0x0 0x01000000>;
+			no-map;
+		};
+	};
+
+	spe-pmu {
+		compatible = "arm,statistical-profiling-extension-v1";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-parent = <&gic>;
+		ranges;
+
+		uart0: serial@2a400000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0x2a400000 0x0 0x1000>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&soc_refclk50mhz>, <&soc_refclk50mhz>;
+			clock-names = "uartclk", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@30000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x30000000 0x0 0x10000>,	/* GICD */
+			      <0x0 0x300c0000 0x0 0x80000>;	/* GICR */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			its1: msi-controller@30040000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x30040000 0x0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+
+			its2: msi-controller@30060000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x30060000 0x0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+
+			its_ccix: msi-controller@30080000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x30080000 0x0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+
+			its_pcie: msi-controller@300a0000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x300a0000 0x0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		smmu_dp: iommu@2ce00000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x0 0x2ce00000 0x0 0x40000>;
+
+			interrupts = <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror", "cmdq-sync";
+			#iommu-cells = <1>;
+		};
+
+		mailbox: mhu@45000000 {
+			compatible = "arm,mhu-doorbell", "arm,primecell";
+			reg = <0x0 0x45000000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			clocks = <&soc_refclk50mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		sram: sram@6000000 {
+			compatible = "mmio-sram";
+			reg = <0x0 0x06000000 0x0 0x8000>;
+			ranges = <0 0x0 0x06000000 0x8000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cpu_scp_hpri0: scp-sram@0 {
+				compatible = "arm,scmi-shmem";
+				reg = <0x0 0x80>;
+			};
+
+			cpu_scp_hpri1: scp-sram@80 {
+				compatible = "arm,scmi-shmem";
+				reg = <0x80 0x80>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
index 258991ad7cc0..a4a29193d4eb 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -23,7 +23,9 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	chosen { };
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 
 	aliases {
 		serial0 = &v2m_serial0;
@@ -71,6 +73,8 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -112,7 +116,6 @@
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <100000000>;
 	};
 
 	pmu {
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index ba8beef3fe99..66b1b74d27dc 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -8,28 +8,28 @@
  * VEMotherBoard.lisa
  */
 / {
-	v2m_clk24mhz: clk24mhz {
+	v2m_clk24mhz: clock-24000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 		clock-output-names = "v2m:clk24mhz";
 	};
 
-	v2m_refclk1mhz: refclk1mhz {
+	v2m_refclk1mhz: clock-1000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <1000000>;
 		clock-output-names = "v2m:refclk1mhz";
 	};
 
-	v2m_refclk32khz: refclk32khz {
+	v2m_refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 		clock-output-names = "v2m:refclk32khz";
 	};
 
-	v2m_fixed_3v3: v2m-3v3 {
+	v2m_fixed_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
 		regulator-min-microvolt = <3300000>;
@@ -41,7 +41,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		v2m_oscclk1: oscclk1 {
+		v2m_oscclk1: clock-controller {
 			/* CLCD clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
index 5b6d9d8e934d..a0e1fa83eafa 100644
--- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -13,7 +13,7 @@
 /dts-v1/;
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "vexpress-v2m-rs1.dtsi"
+#include "arm/arm/vexpress-v2m-rs1.dtsi"
 
 / {
 	model = "V2F-1XV7 Cortex-A53x2 SMM";
@@ -57,6 +57,8 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -100,7 +102,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 	};
@@ -109,7 +111,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		smbclk: smclk {
+		smbclk: clock-controller {
 			/* SMC clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -118,7 +120,7 @@
 			clock-output-names = "smclk";
 		};
 
-		volt-vio {
+		regulator-vio {
 			/* VIO to expansion board above */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
@@ -128,7 +130,7 @@
 			regulator-always-on;
 		};
 
-		volt-12v {
+		regulator-12v {
 			/* 12V from power connector J6 */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 1>;
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi b/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi
deleted file mode 120000
index 68fd0f8f1dee..000000000000
--- a/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi
-\ No newline at end of file
diff --git a/arch/arm64/boot/dts/axiado/Makefile b/arch/arm64/boot/dts/axiado/Makefile
new file mode 100644
index 000000000000..6676ad07db61
--- /dev/null
+++ b/arch/arm64/boot/dts/axiado/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_AXIADO) += ax3000-evk.dtb
diff --git a/arch/arm64/boot/dts/axiado/ax3000-evk.dts b/arch/arm64/boot/dts/axiado/ax3000-evk.dts
new file mode 100644
index 000000000000..b86e96962557
--- /dev/null
+++ b/arch/arm64/boot/dts/axiado/ax3000-evk.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021-25 Axiado Corporation (or its affiliates). All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ax3000.dtsi"
+
+/ {
+	model = "Axiado AX3000 EVK";
+	compatible = "axiado,ax3000-evk", "axiado,ax3000";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* Cortex-A53 will use following memory map */
+		reg = <0x00000000 0x3d000000 0x00000000 0x23000000>,
+		      <0x00000004 0x00000000 0x00000000 0x80000000>;
+	};
+};
+
+/* GPIO bank 0 - 7 */
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&gpio6 {
+	status = "okay";
+};
+
+&gpio7 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/axiado/ax3000.dtsi b/arch/arm64/boot/dts/axiado/ax3000.dtsi
new file mode 100644
index 000000000000..792f52e0c7dd
--- /dev/null
+++ b/arch/arm64/boot/dts/axiado/ax3000.dtsi
@@ -0,0 +1,520 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021-25 Axiado Corporation (or its affiliates). All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x3c0013a0 0x00000008;	/* cpu-release-addr */
+/ {
+	model = "Axiado AX3000";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x3c0013a0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x3c0013a0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x3c0013a0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x3c0013a0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-unified;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+	};
+
+	clocks {
+		clk_xin: clock-200000000 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+			clock-output-names = "clk_xin";
+		};
+
+		refclk: clock-125000000 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-parent = <&gic500>;
+
+		gic500: interrupt-controller@80300000 {
+			compatible = "arm,gic-v3";
+			reg = <0x00 0x80300000 0x00 0x10000>,
+			      <0x00 0x80380000 0x00 0x80000>;
+			ranges;
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		/* GPIO Controller banks 0 - 7 */
+		gpio0: gpio-controller@80500000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80500000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio1: gpio-controller@80580000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80580000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio2: gpio-controller@80600000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80600000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio3: gpio-controller@80680000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80680000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio4: gpio-controller@80700000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80700000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio5: gpio-controller@80780000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80780000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio6: gpio-controller@80800000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80800000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio7: gpio-controller@80880000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80880000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		/* I3C Controller 0 - 16 */
+		i3c0: i3c@80500400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80500400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c1: i3c@80500800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80500800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c2: i3c@80580400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80580400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c3: i3c@80580800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80580800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c4: i3c@80600400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80600400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c5: i3c@80600800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80600800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c6: i3c@80680400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80680400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c7: i3c@80680800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80680800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c8: i3c@80700400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80700400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c9: i3c@80700800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80700800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c10: i3c@80780400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80780400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c11: i3c@80780800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80780800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c12: i3c@80800400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80800400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c13: i3c@80800800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80800800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c14: i3c@80880400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80880400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c15: i3c@80880800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80880800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c16: i3c@80620400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80620400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		uart0: serial@80520000 {
+			compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+			reg = <0x00 0x80520000 0x00 0x100>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "uart_clk", "pclk";
+			clocks = <&refclk &refclk>;
+			status = "disabled";
+		};
+
+		uart1: serial@805a0000 {
+			compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+			reg = <0x00 0x805A0000 0x00 0x100>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "uart_clk", "pclk";
+			clocks = <&refclk &refclk>;
+			status = "disabled";
+		};
+
+		uart2: serial@80620000 {
+			compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+			reg = <0x00 0x80620000 0x00 0x100>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "uart_clk", "pclk";
+			clocks = <&refclk &refclk>;
+			status = "disabled";
+		};
+
+		uart3: serial@80520800 {
+			compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+			reg = <0x00 0x80520800 0x00 0x100>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "uart_clk", "pclk";
+			clocks = <&refclk &refclk>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			   <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			   <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			   <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index 53a9b76057aa..22a200fb07d2 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -184,7 +184,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial@5801A000 {
+		uart1: serial@5801a000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801a000 0x0 0x2000>;
 			clocks = <&clk BM1880_CLK_UART_500M>,
@@ -197,7 +197,7 @@
 			status = "disabled";
 		};
 
-		uart2: serial@5801C000 {
+		uart2: serial@5801c000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801c000 0x0 0x2000>;
 			clocks = <&clk BM1880_CLK_UART_500M>,
@@ -210,7 +210,7 @@
 			status = "disabled";
 		};
 
-		uart3: serial@5801E000 {
+		uart3: serial@5801e000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801e000 0x0 0x2000>;
 			clocks = <&clk BM1880_CLK_UART_500M>,
diff --git a/arch/arm64/boot/dts/blaize/Makefile b/arch/arm64/boot/dts/blaize/Makefile
new file mode 100644
index 000000000000..7e10b3199e6c
--- /dev/null
+++ b/arch/arm64/boot/dts/blaize/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0+
+dtb-$(CONFIG_ARCH_BLAIZE) += blaize-blzp1600-cb2.dtb
diff --git a/arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts b/arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts
new file mode 100644
index 000000000000..fb5415eb347a
--- /dev/null
+++ b/arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024 Blaize, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "blaize-blzp1600-som.dtsi"
+
+/ {
+	model = "Blaize BLZP1600 SoM1600P CB2 Development Board";
+
+	compatible = "blaize,blzp1600-cb2", "blaize,blzp1600";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	gpio_expander: gpio@74 {
+		compatible = "ti,tca9539";
+		reg = <0x74>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "RSP_PIN_7",	/* GPIO_0 */
+				  "RSP_PIN_11",	/* GPIO_1 */
+				  "RSP_PIN_13",	/* GPIO_2 */
+				  "RSP_PIN_15",	/* GPIO_3 */
+				  "RSP_PIN_27",	/* GPIO_4 */
+				  "RSP_PIN_29",	/* GPIO_5 */
+				  "RSP_PIN_31",	/* GPIO_6 */
+				  "RSP_PIN_33",	/* GPIO_7 */
+				  "RSP_PIN_37",	/* GPIO_8 */
+				  "RSP_PIN_16",	/* GPIO_9 */
+				  "RSP_PIN_18",	/* GPIO_10 */
+				  "RSP_PIN_22",	/* GPIO_11 */
+				  "RSP_PIN_28",	/* GPIO_12 */
+				  "RSP_PIN_32",	/* GPIO_13 */
+				  "RSP_PIN_36",	/* GPIO_14 */
+				  "TP31";	/* GPIO_15 */
+	};
+
+	gpio_expander_m2: gpio@75 {
+		compatible = "ti,tca9539";
+		reg = <0x75>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "M2_W_DIS1_N",	/* GPIO_0 */
+				  "M2_W_DIS2_N",	/* GPIO_1 */
+				  "M2_UART_WAKE_N",	/* GPIO_2 */
+				  "M2_COEX3",		/* GPIO_3 */
+				  "M2_COEX_RXD",	/* GPIO_4 */
+				  "M2_COEX_TXD",	/* GPIO_5 */
+				  "M2_VENDOR_PIN40",	/* GPIO_6 */
+				  "M2_VENDOR_PIN42",	/* GPIO_7 */
+				  "M2_VENDOR_PIN38",	/* GPIO_8 */
+				  "M2_SDIO_RST_N",	/* GPIO_9 */
+				  "M2_SDIO_WAKE_N",	/* GPIO_10 */
+				  "M2_PETN1",		/* GPIO_11 */
+				  "M2_PERP1",		/* GPIO_12 */
+				  "M2_PERN1",		/* GPIO_13 */
+				  "UIM_SWP",		/* GPIO_14 */
+				  "UART1_TO_RSP";	/* GPIO_15 */
+	};
+};
+
+&gpio0 {
+	status = "okay";
+	gpio-line-names = "PERST_N",		/* GPIO_0 */
+			  "LM96063_ALERT_N",	/* GPIO_1 */
+			  "INA3221_PV",		/* GPIO_2 */
+			  "INA3221_CRIT",	/* GPIO_3 */
+			  "INA3221_WARN",	/* GPIO_4 */
+			  "INA3221_TC",		/* GPIO_5 */
+			  "QSPI0_RST_N",	/* GPIO_6 */
+			  "LM96063_TCRIT_N",	/* GPIO_7 */
+			  "DSI_TCH_INT",	/* GPIO_8 */
+			  "DSI_RST",		/* GPIO_9 */
+			  "DSI_BL",		/* GPIO_10 */
+			  "DSI_INT",		/* GPIO_11 */
+			  "ETH_RST",		/* GPIO_12 */
+			  "CSI0_RST",		/* GPIO_13 */
+			  "CSI0_PWDN",		/* GPIO_14 */
+			  "CSI1_RST",		/* GPIO_15 */
+			  "CSI1_PWDN",		/* GPIO_16 */
+			  "CSI2_RST",		/* GPIO_17 */
+			  "CSI2_PWDN",		/* GPIO_18 */
+			  "CSI3_RST",		/* GPIO_19 */
+			  "CSI3_PWDN",		/* GPIO_20 */
+			  "ADAC_RST",		/* GPIO_21 */
+			  "SD_SW_VDD",		/* GPIO_22 */
+			  "SD_PON_VDD",		/* GPIO_23 */
+			  "GPIO_EXP_INT",	/* GPIO_24 */
+			  "BOARD_ID_0",		/* GPIO_25 */
+			  "SDIO1_SW_VDD",	/* GPIO_26 */
+			  "SDIO1_PON_VDD",	/* GPIO_27 */
+			  "SDIO2_SW_VDD",	/* GPIO_28 */
+			  "SDIO2_PON_VDD",	/* GPIO_29 */
+			  "BOARD_ID_1",		/* GPIO_30 */
+			  "BOARD_ID_2";		/* GPIO_31 */
+};
diff --git a/arch/arm64/boot/dts/blaize/blaize-blzp1600-som.dtsi b/arch/arm64/boot/dts/blaize/blaize-blzp1600-som.dtsi
new file mode 100644
index 000000000000..bfdff5953edd
--- /dev/null
+++ b/arch/arm64/boot/dts/blaize/blaize-blzp1600-som.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024 Blaize, Inc. All rights reserved.
+ */
+
+#include "blaize-blzp1600.dtsi"
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x1 0x0>;
+	};
+};
+
+/* i2c4 bus is available only on the SoM, not on the board */
+&i2c4 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi b/arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi
new file mode 100644
index 000000000000..5a6c882b2f57
--- /dev/null
+++ b/arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024 Blaize, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0x82002000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			shmem = <&scmi0_shm>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_rst: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* SCMI reserved buffer space on DDR space */
+		scmi0_shm: scmi-shmem@800 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x800 0x0 0x80>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = /* Physical Secure PPI */
+			     <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x3) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     /* Physical Non-Secure PPI */
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x3) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     /* Hypervisor PPI */
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x3) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     /* Virtual PPI */
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x3) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc@200000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x2 0x0 0x850000>;
+
+		gic: interrupt-controller@410000 {
+			compatible = "arm,gic-400";
+			reg = <0x410000 0x20000>,
+			      <0x420000 0x20000>,
+			      <0x440000 0x20000>,
+			      <0x460000 0x20000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0x3) |
+						 IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		gpio0: gpio@4c0000 {
+			compatible = "blaize,blzp1600-gpio";
+			reg = <0x4c0000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <32>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		uart0: serial@4d0000 {
+			compatible = "ns16550a";
+			reg = <0x4d0000 0x1000>;
+			clocks = <&scmi_clk 59>;
+			resets = <&scmi_rst 59>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial@4e0000 {
+			compatible = "ns16550a";
+			reg = <0x4e0000 0x1000>;
+			clocks = <&scmi_clk 60>;
+			resets = <&scmi_rst 60>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@4f0000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x4f0000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 54>;
+			resets = <&scmi_rst 54>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@500000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x500000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 55>;
+			resets = <&scmi_rst 55>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@510000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x510000 0x1000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 56>;
+			resets = <&scmi_rst 56>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@520000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x520000 0x1000>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 57>;
+			resets = <&scmi_rst 57>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@530000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x530000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 58>;
+			resets = <&scmi_rst 58>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		arm_cc712: crypto@550000 {
+			compatible = "arm,cryptocell-712-ree";
+			reg = <0x550000 0x1000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 7>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index e8584d3b698f..83d45afc6588 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,14 +1,22 @@
 # SPDX-License-Identifier: GPL-2.0
+
+# Enables support for device-tree overlays
+DTC_FLAGS := -@
+
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
 			      bcm2711-rpi-4-b.dtb \
 			      bcm2711-rpi-cm4-io.dtb \
+			      bcm2712-rpi-5-b.dtb \
+			      bcm2712-rpi-5-b-ovl-rp1.dtb \
+			      bcm2712-d-rpi-5-b.dtb \
+			      bcm2837-rpi-2-b.dtb \
 			      bcm2837-rpi-3-a-plus.dtb \
 			      bcm2837-rpi-3-b.dtb \
 			      bcm2837-rpi-3-b-plus.dtb \
 			      bcm2837-rpi-cm3-io3.dtb \
-			      bcm2837-rpi-zero-2-w.dtb
+			      bcm2837-rpi-zero-2-w.dtb \
+			      rp1.dtbo
 
-subdir-y	+= bcm4908
 subdir-y	+= bcmbca
 subdir-y	+= northstar2
 subdir-y	+= stingray
diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts
index d24c53682e44..c7280bdefa8d 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts
@@ -1,2 +1,2 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "arm/bcm2711-rpi-4-b.dts"
+#include "arm/broadcom/bcm2711-rpi-4-b.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts
index b9000f58beb5..d9d2852b794f 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts
@@ -1,2 +1,2 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "arm/bcm2711-rpi-400.dts"
+#include "arm/broadcom/bcm2711-rpi-400.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
index e36d395e3951..8810322aa66a 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
@@ -1,2 +1,2 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "arm/bcm2711-rpi-cm4-io.dts"
+#include "arm/broadcom/bcm2711-rpi-cm4-io.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts
new file mode 100644
index 000000000000..7de24d60bcd1
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include "bcm2712-rpi-5-b.dts"
+
+&gio_aon {
+	brcm,gpio-bank-widths = <15 6>;
+
+	gpio-line-names =
+		"RP1_SDA", // AON_GPIO_00
+		"RP1_SCL", // AON_GPIO_01
+		"RP1_RUN", // AON_GPIO_02
+		"SD_IOVDD_SEL", // AON_GPIO_03
+		"SD_PWR_ON", // AON_GPIO_04
+		"SD_CDET_N", // AON_GPIO_05
+		"SD_FLG_N", // AON_GPIO_06
+		"", // AON_GPIO_07
+		"2712_WAKE", // AON_GPIO_08
+		"2712_STAT_LED", // AON_GPIO_09
+		"", // AON_GPIO_10
+		"", // AON_GPIO_11
+		"PMIC_INT", // AON_GPIO_12
+		"UART_TX_FS", // AON_GPIO_13
+		"UART_RX_FS", // AON_GPIO_14
+		"", // AON_GPIO_15
+		"", // AON_GPIO_16
+
+		// Pad bank0 out to 32 entries
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "", "",
+
+		"HDMI0_SCL", // AON_SGPIO_00
+		"HDMI0_SDA", // AON_SGPIO_01
+		"HDMI1_SCL", // AON_SGPIO_02
+		"HDMI1_SDA", // AON_SGPIO_03
+		"PMIC_SCL", // AON_SGPIO_04
+		"PMIC_SDA"; // AON_SGPIO_05
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
new file mode 100644
index 000000000000..04738bf281eb
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "bcm2712.dtsi"
+
+/ {
+	compatible = "raspberrypi,5-model-b", "brcm,bcm2712";
+	model = "Raspberry Pi 5";
+
+	aliases {
+		serial10 = &uart10;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial10:115200n8";
+	};
+
+	clk_rp1_xosc: clock-50000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "rp1-xosc";
+		clock-frequency = <50000000>;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0 0 0x28000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_button_default>;
+		status = "okay";
+
+		power_button: power-button {
+			label = "pwr_button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gio 20 GPIO_ACTIVE_LOW>;
+			debounce-interval = <50>;
+		};
+	};
+
+	sd_io_1v8_reg: sd-io-1v8-reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+		gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>;
+		states = <1800000 1>,
+			 <3300000 0>;
+	};
+
+	sd_vcc_reg: sd-vcc-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	wl_on_reg: wl-on-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "wl-on-regulator";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-0 = <&wl_on_default>;
+		pinctrl-names = "default";
+		gpio = <&gio 28 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <150000>;
+		enable-active-high;
+	};
+};
+
+&pinctrl {
+	bt_shutdown_default: bt-shutdown-default-state {
+		function = "gpio";
+		pins = "gpio29";
+	};
+
+	emmc_sd_default: emmc-sd-default-state {
+		pins = "emmc_cmd", "emmc_dat0", "emmc_dat1", "emmc_dat2", "emmc_dat3";
+		bias-pull-up;
+	};
+
+	pwr_button_default: pwr-button-default-state {
+		function = "gpio";
+		pins = "gpio20";
+		bias-pull-up;
+	};
+
+	sdio2_30_default: sdio2-30-default-state {
+		clk-pins {
+			function = "sd2";
+			pins = "gpio30";
+			bias-disable;
+		};
+		cmd-pins {
+			function = "sd2";
+			pins = "gpio31";
+			bias-pull-up;
+		};
+		dat-pins {
+			function = "sd2";
+			pins = "gpio32", "gpio33", "gpio34", "gpio35";
+			bias-pull-up;
+		};
+	};
+
+	uarta_24_default: uarta-24-default-state {
+		rts-pins {
+			function = "uart0";
+			pins = "gpio24";
+			bias-disable;
+		};
+		cts-pins {
+			function = "uart0";
+			pins = "gpio25";
+			bias-pull-up;
+		};
+		txd-pins {
+			function = "uart0";
+			pins = "gpio26";
+			bias-disable;
+		};
+		rxd-pins {
+			function = "uart0";
+			pins = "gpio27";
+			bias-pull-up;
+		};
+	};
+
+	wl_on_default: wl-on-default-state {
+		function = "gpio";
+		pins = "gpio28";
+	};
+};
+
+&pinctrl_aon {
+	emmc_aon_cd_default: emmc-aon-cd-default-state {
+		function = "sd_card_g";
+		pins = "aon_gpio5";
+		bias-pull-up;
+	};
+};
+
+/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector
+ * labeled "UART", i.e. the interface with the system console.
+ */
+&uart10 {
+	status = "okay";
+};
+
+/* SDIO1 is used to drive the SD card */
+&sdio1 {
+	pinctrl-0 = <&emmc_sd_default>, <&emmc_aon_cd_default>;
+	pinctrl-names = "default";
+	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	sd-uhs-sdr104;
+	cd-gpios = <&gio_aon 5 GPIO_ACTIVE_LOW>;
+};
+
+&sdio2 {
+	pinctrl-0 = <&sdio2_30_default>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	vmmc-supply = <&wl_on_reg>;
+	sd-uhs-ddr50;
+	non-removable;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&soc {
+	firmware: firmware {
+		compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mboxes = <&mailbox>;
+		dma-ranges;
+
+		firmware_clocks: clocks {
+			compatible = "raspberrypi,firmware-clocks";
+			#clock-cells = <1>;
+		};
+
+		reset: reset {
+			compatible = "raspberrypi,firmware-reset";
+			#reset-cells = <1>;
+		};
+	};
+
+	power: power {
+		compatible = "raspberrypi,bcm2835-power";
+		firmware = <&firmware>;
+		#power-domain-cells = <1>;
+	};
+};
+
+/* uarta communicates with the BT module */
+&uarta {
+	uart-has-rtscts;
+	pinctrl-0 = <&uarta_24_default &bt_shutdown_default>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gio 29 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&hvs {
+	clocks = <&firmware_clocks 4>, <&firmware_clocks 16>;
+	clock-names = "core", "disp";
+};
+
+&hdmi0 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+};
+
+&hdmi1 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
new file mode 100644
index 000000000000..b8f256545022
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * bcm2712-rpi-5-b-ovl-rp1.dts is the overlay-ready DT which will make
+ * the RP1 driver to load the RP1 dtb overlay at runtime, while
+ * bcm2712-rpi-5-b.dts (this file) is the fully defined one (i.e. it
+ * already contains RP1 node, so no overlay is loaded nor needed).
+ * This file is intended to host the override nodes for the RP1 peripherals,
+ * e.g. to declare the phy of the ethernet interface or the custom pin setup
+ * for several RP1 peripherals.
+ * This in turn is due to the fact that there's no current generic
+ * infrastructure to reference nodes (i.e. the nodes in rp1-common.dtsi) that
+ * are not yet defined in the DT since they are loaded at runtime via overlay.
+ * All other nodes that do not have anything to do with RP1 should be added
+ * to the included bcm2712-rpi-5-b-ovl-rp1.dts instead.
+ */
+
+/dts-v1/;
+
+#include "bcm2712-rpi-5-b-ovl-rp1.dts"
+
+&pcie2 {
+	#include "rp1-nexus.dtsi"
+};
+
+&rp1_eth {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy1>;
+
+	mdio {
+		reg = <0x1>;
+		reset-gpios = <&rp1_gpio 32 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <5000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+	};
+};
+
+&rp1_gpio {
+	usb_vbus_default_state: usb-vbus-default-state {
+		function = "vbus1";
+		groups = "vbus1";
+	};
+};
+
+&rp1_usb0 {
+	pinctrl-0 = <&usb_vbus_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rp1_usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
new file mode 100644
index 000000000000..e77a66adc22a
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -0,0 +1,669 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm2712";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gicv2>;
+
+	clocks {
+		/* The oscillator is the root of the clock tree. */
+		clk_osc: clk-osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "osc";
+			clock-frequency = <54000000>;
+		};
+
+		clk_vpu: clk-vpu {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <750000000>;
+			clock-output-names = "vpu-clock";
+		};
+
+		clk_uart: clk-uart {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <9216000>;
+			clock-output-names = "uart-clock";
+		};
+
+		clk_emmc2: clk-emmc2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+			clock-output-names = "emmc2-clock";
+		};
+
+		clk_sw_baud: clk-sw-baud {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <96000000>;
+			clock-output-names = "sw-baud";
+		};
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Source for L1 d/i cache-line-size, cache-sets, cache-size
+		 * https://developer.arm.com/documentation/100798/0401/L1-memory-system/About-the-L1-memory-system?lang=en
+		 * Source for L2 cache-line-size and cache-sets:
+		 * https://developer.arm.com/documentation/100798/0401/L2-memory-system/About-the-L2-memory-system?lang=en
+		 * and for cache-size:
+		 * https://www.raspberrypi.com/documentation/computers/processors.html#bcm2712
+		 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x000>;
+			enable-method = "psci";
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			next-level-cache = <&l2_cache_l0>;
+
+			l2_cache_l0: l2-cache {
+				compatible = "cache";
+				cache-size = <0x80000>;
+				cache-line-size = <64>;
+				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_cache>;
+			};
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x100>;
+			enable-method = "psci";
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			next-level-cache = <&l2_cache_l1>;
+
+			l2_cache_l1: l2-cache {
+				compatible = "cache";
+				cache-size = <0x80000>;
+				cache-line-size = <64>;
+				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_cache>;
+			};
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x200>;
+			enable-method = "psci";
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			next-level-cache = <&l2_cache_l2>;
+
+			l2_cache_l2: l2-cache {
+				compatible = "cache";
+				cache-size = <0x80000>;
+				cache-line-size = <64>;
+				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_cache>;
+			};
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x300>;
+			enable-method = "psci";
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
+			next-level-cache = <&l2_cache_l3>;
+
+			l2_cache_l3: l2-cache {
+				compatible = "cache";
+				cache-size = <0x80000>;
+				cache-line-size = <64>;
+				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_cache>;
+			};
+		};
+
+		/* Source for cache-line-size and cache-sets:
+		 * https://developer.arm.com/documentation/100453/0401/L3-cache?lang=en
+		 * Source for cache-size:
+		 * https://www.raspberrypi.com/documentation/computers/processors.html#bcm2712
+		 */
+		l3_cache: l3-cache {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>; // 2MiB(size)/64(line-size)=32768ways/16-way set
+			cache-level = <3>;
+			cache-unified;
+		};
+	};
+
+	psci {
+		method = "smc";
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+	};
+
+	rmem: reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		atf@0 {
+			reg = <0x0 0x0 0x0 0x80000>;
+			no-map;
+		};
+
+		cma: linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x4000000>; /* 64MB */
+			reusable;
+			linux,cma-default;
+			alloc-ranges = <0x0 0x00000000 0x0 0x40000000>;
+		};
+	};
+
+	soc: soc@107c000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000  0x10 0x00000000  0x80000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		pcie_rescal: reset-controller@119500 {
+			compatible = "brcm,bcm7216-pcie-sata-rescal";
+			reg = <0x00119500 0x10>;
+			#reset-cells = <0>;
+		};
+
+		sdio1: mmc@fff000 {
+			compatible = "brcm,bcm2712-sdhci",
+				     "brcm,sdhci-brcmstb";
+			reg = <0x00fff000 0x260>,
+			      <0x00fff400 0x200>;
+			reg-names = "host", "cfg";
+			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_emmc2>;
+			clock-names = "sw_sdio";
+			mmc-ddr-3_3v;
+		};
+
+		bcm_reset: reset-controller@1504318 {
+			compatible = "brcm,brcmstb-reset";
+			reg = <0x01504318 0x30>;
+			#reset-cells = <1>;
+		};
+
+		system_timer: timer@7c003000 {
+			compatible = "brcm,bcm2835-system-timer";
+			reg = <0x7c003000 0x1000>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <1000000>;
+		};
+
+		mailbox: mailbox@7c013880 {
+			compatible = "brcm,bcm2835-mbox";
+			reg = <0x7c013880 0x40>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <0>;
+		};
+
+		uart10: serial@7d001000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7d001000 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_uart>, <&clk_vpu>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00341011>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@7d504100 {
+			compatible = "brcm,bcm2712c0-pinctrl";
+			reg = <0x7d504100 0x30>;
+		};
+
+		gio: gpio@7d508500 {
+			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+			reg = <0x7d508500 0x40>;
+			interrupt-parent = <&main_irq>;
+			interrupts = <0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			brcm,gpio-bank-widths = <32 22>;
+		};
+
+		uarta: serial@7d50c000 {
+			compatible = "brcm,bcm7271-uart";
+			reg = <0x7d50c000 0x20>;
+			reg-names = "uart";
+			clocks = <&clk_sw_baud>;
+			clock-names = "sw_baud";
+			interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart";
+			status = "disabled";
+		};
+
+		pinctrl_aon: pinctrl@7d510700 {
+			compatible = "brcm,bcm2712c0-aon-pinctrl";
+			reg = <0x7d510700 0x20>;
+		};
+
+		interrupt-controller@7d517000 {
+			compatible = "brcm,bcm7271-l2-intc";
+			reg = <0x7d517000 0x10>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gio_aon: gpio@7d517c00 {
+			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+			reg = <0x7d517c00 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			brcm,gpio-bank-widths = <17 6>;
+			/* The lack of 'interrupt-controller' property here is intended:
+			 * don't use GIO_AON as an interrupt controller because it will
+			 * clash with the firmware monitoring the PMIC interrupt via the VPU.
+			 */
+		};
+
+		sdio2: mmc@1100000 {
+			compatible = "brcm,bcm2712-sdhci",
+				     "brcm,sdhci-brcmstb";
+			reg = <0x01100000  0x260>,
+			      <0x01100400  0x200>;
+			reg-names = "host", "cfg";
+			interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_emmc2>;
+			clock-names = "sw_sdio";
+			sdhci-caps-mask = <0x0000C000 0x0>;
+			sdhci-caps = <0x0 0x0>;
+			mmc-ddr-3_3v;
+			status = "disabled";
+		};
+
+		gicv2: interrupt-controller@7fff9000 {
+			compatible = "arm,gic-400";
+			reg = <0x7fff9000 0x1000>,
+			      <0x7fffa000 0x2000>,
+			      <0x7fffc000 0x2000>,
+			      <0x7fffe000 0x2000>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <3>;
+		};
+
+		aon_intr: interrupt-controller@7d510600 {
+			compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+			reg = <0x7d510600 0x30>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pixelvalve0: pixelvalve@7c410000 {
+			compatible = "brcm,bcm2712-pixelvalve0";
+			reg = <0x7c410000 0x100>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pixelvalve1: pixelvalve@7c411000 {
+			compatible = "brcm,bcm2712-pixelvalve1";
+			reg = <0x7c411000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		mop: mop@7c500000 {
+			compatible = "brcm,bcm2712-mop";
+			reg = <0x7c500000 0x28>;
+			interrupt-parent = <&disp_intr>;
+			interrupts = <1>;
+		};
+
+		moplet: moplet@7c501000 {
+			compatible = "brcm,bcm2712-moplet";
+			reg = <0x7c501000 0x20>;
+			interrupt-parent = <&disp_intr>;
+			interrupts = <0>;
+		};
+
+		disp_intr: interrupt-controller@7c502000 {
+			compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+			reg = <0x7c502000 0x30>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		dvp: clock@7c700000 {
+			compatible = "brcm,brcm2711-dvp";
+			reg = <0x7c700000 0x10>;
+			clocks = <&clk_108MHz>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		ddc0: i2c@7d508200 {
+			compatible = "brcm,brcmstb-i2c";
+			reg = <0x7d508200 0x58>;
+			interrupt-parent = <&bsc_irq>;
+			interrupts = <1>;
+			clock-frequency = <97500>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ddc1: i2c@7d508280 {
+			compatible = "brcm,brcmstb-i2c";
+			reg = <0x7d508280 0x58>;
+			interrupt-parent = <&bsc_irq>;
+			interrupts = <2>;
+			clock-frequency = <97500>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		bsc_irq: interrupt-controller@7d508380 {
+			compatible = "brcm,bcm7271-l2-intc";
+			reg = <0x7d508380 0x10>;
+			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		main_irq: interrupt-controller@7d508400 {
+			compatible = "brcm,bcm7271-l2-intc";
+			reg = <0x7d508400 0x10>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		hdmi0: hdmi@7c701400 {
+			compatible = "brcm,bcm2712-hdmi0";
+			reg = <0x7c701400 0x300>,
+			      <0x7c701000 0x200>,
+			      <0x7c701d00 0x300>,
+			      <0x7c702000 0x80>,
+			      <0x7c703800 0x200>,
+			      <0x7c704000 0x800>,
+			      <0x7c700100 0x80>,
+			      <0x7d510800 0x100>,
+			      <0x7c720000 0x100>;
+			reg-names = "hdmi",
+				    "dvp",
+				    "phy",
+				    "rm",
+				    "packet",
+				    "metadata",
+				    "csc",
+				    "cec",
+				    "hd";
+			resets = <&dvp 1>;
+			interrupt-parent = <&aon_intr>;
+			interrupts = <1>, <2>, <3>,
+				     <7>, <8>;
+			interrupt-names = "cec-tx", "cec-rx", "cec-low",
+					  "hpd-connected", "hpd-removed";
+			ddc = <&ddc0>;
+		};
+
+		hdmi1: hdmi@7c706400 {
+			compatible = "brcm,bcm2712-hdmi1";
+			reg = <0x7c706400 0x300>,
+			      <0x7c706000 0x200>,
+			      <0x7c706d00 0x300>,
+			      <0x7c707000 0x80>,
+			      <0x7c708800 0x200>,
+			      <0x7c709000 0x800>,
+			      <0x7c700180 0x80>,
+			      <0x7d511000 0x100>,
+			      <0x7c720000 0x100>;
+			reg-names = "hdmi",
+				    "dvp",
+				    "phy",
+				    "rm",
+				    "packet",
+				    "metadata",
+				    "csc",
+				    "cec",
+				    "hd";
+			resets = <&dvp 2>;
+			interrupt-parent = <&aon_intr>;
+			interrupts = <11>, <12>, <13>,
+				     <14>, <15>;
+			interrupt-names = "cec-tx", "cec-rx", "cec-low",
+					  "hpd-connected", "hpd-removed";
+			ddc = <&ddc1>;
+		};
+	};
+
+	axi: axi {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x00000000  0x00 0x00000000  0x10 0x00000000>,
+			 <0x10 0x00000000  0x10 0x00000000  0x01 0x00000000>,
+			 <0x14 0x00000000  0x14 0x00000000  0x04 0x00000000>,
+			 <0x18 0x00000000  0x18 0x00000000  0x04 0x00000000>,
+			 <0x1c 0x00000000  0x1c 0x00000000  0x04 0x00000000>;
+
+		dma-ranges = <0x00 0x00000000  0x00 0x00000000  0x10 0x00000000>,
+			     <0x10 0x00000000  0x10 0x00000000  0x01 0x00000000>,
+			     <0x14 0x00000000  0x14 0x00000000  0x04 0x00000000>,
+			     <0x18 0x00000000  0x18 0x00000000  0x04 0x00000000>,
+			     <0x1c 0x00000000  0x1c 0x00000000  0x04 0x00000000>;
+
+		vc4: gpu {
+			compatible = "brcm,bcm2712-vc6";
+		};
+
+		pcie0: pcie@1000100000 {
+			compatible = "brcm,bcm2712-pcie";
+			reg = <0x10 0x00100000 0x00 0x9310>;
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			max-link-speed = <2>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupt-parent = <&gicv2>;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&pcie_rescal>, <&bcm_reset 42>;
+			reset-names = "rescal", "bridge";
+			msi-controller;
+			msi-parent = <&pcie0>;
+
+			ranges =
+				/* ~4GiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+				<0x02000000 0x00 0x00000000 0x17 0x00000000 0x00 0xfffffffc>,
+				/* 12GiB, 64-bit, prefetchable at PCIe 04_0000_0000 */
+				<0x43000000 0x04 0x00000000 0x14 0x00000000 0x03 0x00000000>;
+
+			dma-ranges =
+				/* 64GiB, 64-bit, prefetchable at PCIe 10_0000_0000 */
+				<0x43000000 0x10 0x00000000 0x00 0x00000000 0x10 0x00000000>;
+
+			status = "disabled";
+		};
+
+		pcie1: pcie@1000110000 {
+			compatible = "brcm,bcm2712-pcie";
+			reg = <0x10 0x00110000 0x00 0x9310>;
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			max-link-speed = <2>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupt-parent = <&gicv2>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&pcie_rescal>, <&bcm_reset 43>;
+			reset-names = "rescal", "bridge";
+			msi-controller;
+			msi-parent = <&mip1>;
+
+			ranges =
+				/* ~4GiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+				<0x02000000 0x00 0x00000000 0x1b 0x00000000 0x00 0xfffffffc>,
+				/* 12GiB, 64-bit, prefetchable at PCIe 04_0000_0000 */
+				<0x43000000 0x04 0x00000000 0x18 0x00000000 0x03 0x00000000>;
+
+			dma-ranges =
+				/* 64GiB, 64-bit, non-prefetchable at PCIe 10_0000_0000 */
+				<0x03000000 0x10 0x00000000 0x00 0x00000000 0x10 0x00000000>,
+				/* 4KiB, 64-bit, non-prefetchable at PCIe ff_ffff_f000 MIP1 */
+				<0x03000000 0xff 0xfffff000 0x10 0x00131000 0x00 0x00001000>;
+
+			status = "disabled";
+		};
+
+		pcie2: pcie@1000120000 {
+			compatible = "brcm,bcm2712-pcie";
+			reg = <0x10 0x00120000 0x00 0x9310>;
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			max-link-speed = <2>;
+			num-lanes = <4>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupt-parent = <&gicv2>;
+			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&pcie_rescal>, <&bcm_reset 44>;
+			reset-names = "rescal", "bridge";
+			msi-controller;
+			msi-parent = <&mip0>;
+
+			ranges =
+				/* ~4GiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+				<0x02000000 0x00 0x00000000 0x1f 0x00000000 0x00 0xfffffffc>,
+				/* 12GiB, 64-bit, prefetchable at PCIe 04_0000_0000 */
+				<0x43000000 0x04 0x00000000 0x1c 0x00000000 0x03 0x00000000>;
+
+			dma-ranges =
+				/* 4MiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+				<0x02000000 0x00 0x00000000 0x1f 0x00000000 0x00 0x00400000>,
+				/* 64GiB, 64-bit, prefetchable at PCIe 10_0000_0000 */
+				<0x43000000 0x10 0x00000000 0x00 0x00000000 0x10 0x00000000>,
+				/* 4KiB, 64-bit, non-prefetchable at PCIe ff_ffff_f000 MIP0 */
+				<0x03000000 0xff 0xfffff000 0x10 0x00130000 0x00 0x00001000>;
+
+			status = "disabled";
+		};
+
+		mip0: msi-controller@1000130000 {
+			compatible = "brcm,bcm2712-mip";
+			reg = <0x10 0x00130000 0x00 0xc0>,
+			      <0xff 0xfffff000 0x00 0x1000>;
+			msi-controller;
+			msi-ranges = <&gicv2 GIC_SPI 128 IRQ_TYPE_EDGE_RISING 64>;
+			brcm,msi-offset = <0>;
+		};
+
+		mip1: msi-controller@1000131000 {
+			compatible = "brcm,bcm2712-mip";
+			reg = <0x10 0x00131000 0x00 0xc0>,
+			      <0xff 0xfffff000 0x00 0x1000>;
+			msi-controller;
+			msi-ranges = <&gicv2 GIC_SPI 247 IRQ_TYPE_EDGE_RISING 8>;
+			brcm,msi-offset = <8>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clk_27MHz: clk-27M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		clock-output-names = "27MHz-clock";
+	};
+
+	clk_108MHz: clk-108M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <108000000>;
+		clock-output-names = "108MHz-clock";
+	};
+
+	hvs: hvs@107c580000 {
+		compatible = "brcm,bcm2712-hvs";
+		reg = <0x10 0x7c580000 0x0 0x1a000>;
+		interrupt-parent = <&disp_intr>;
+		interrupts = <2>, <9>, <16>;
+		interrupt-names = "ch0-eof", "ch1-eof", "ch2-eof";
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-2-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-2-b.dts
new file mode 100644
index 000000000000..57742ed40049
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-2-b.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2837-rpi-2-b.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
index f0ec56a1c4d7..17d778a7e0c9 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
@@ -1,2 +1,2 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "arm/bcm2837-rpi-3-a-plus.dts"
+#include "arm/broadcom/bcm2837-rpi-3-a-plus.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
index 46ad2023cccf..0cf6240b6bf0 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
@@ -1,2 +1,2 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "arm/bcm2837-rpi-3-b-plus.dts"
+#include "arm/broadcom/bcm2837-rpi-3-b-plus.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index 89b78d6c19bf..f429468fd86e 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -1,2 +1,2 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "arm/bcm2837-rpi-3-b.dts"
+#include "arm/broadcom/bcm2837-rpi-3-b.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
index b1c4ab212c64..3fa21bd16b49 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
@@ -1,2 +1,2 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "arm/bcm2837-rpi-cm3-io3.dts"
+#include "arm/broadcom/bcm2837-rpi-cm3-io3.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
index 307ae693e4a0..363381a0cfb5 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
@@ -1,2 +1,2 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "arm/bcm2837-rpi-zero-2-w.dts"
+#include "arm/broadcom/bcm2837-rpi-zero-2-w.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
deleted file mode 100644
index 6e364e304d4f..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-netgear-raxe500.dtb
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
deleted file mode 100644
index 04f8524b5335..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+++ /dev/null
@@ -1,159 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "bcm4908.dtsi"
-
-/ {
-	compatible = "asus,gt-ac5300", "brcm,bcm4908";
-	model = "Asus GT-AC5300";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00 0x00 0x00 0x40000000>;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		key-wifi {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-		};
-
-		key-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-
-		key-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-		};
-
-		key-brightness {
-			label = "LEDs";
-			linux,code = <KEY_BRIGHTNESS_ZERO>;
-			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&enet {
-	nvmem-cells = <&base_mac_addr>;
-	nvmem-cell-names = "mac-address";
-};
-
-&usb_phy {
-	brcm,ioc = <1>;
-	status = "okay";
-};
-
-&ehci {
-	status = "okay";
-};
-
-&ohci {
-	status = "okay";
-};
-
-&xhci {
-	status = "okay";
-};
-
-&ports {
-	port@0 {
-		label = "lan2";
-	};
-
-	port@1 {
-		label = "lan1";
-	};
-
-	port@2 {
-		label = "lan6";
-	};
-
-	port@3 {
-		label = "lan5";
-	};
-
-	/* External BCM53134S switch */
-	port@7 {
-		label = "sw";
-		reg = <7>;
-		phy-mode = "rgmii";
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-		};
-	};
-};
-
-&mdio {
-	/* lan8 */
-	ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	/* lan7 */
-	ethernet-phy@1 {
-		reg = <1>;
-	};
-
-	/* lan4 */
-	ethernet-phy@2 {
-		reg = <2>;
-	};
-
-	/* lan3 */
-	ethernet-phy@3 {
-		reg = <3>;
-	};
-};
-
-&nandcs {
-	nand-ecc-strength = <4>;
-	nand-ecc-step-size = <512>;
-	nand-on-flash-bbt;
-	brcm,nand-has-wp;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	partitions {
-		compatible = "brcm,bcm4908-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			compatible = "nvmem-cells";
-			label = "cferom";
-			reg = <0x0 0x100000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x0 0x100000>;
-
-			base_mac_addr: mac@106a0 {
-				reg = <0x106a0 0x6>;
-			};
-		};
-
-		partition@100000 {
-			compatible = "brcm,bcm4908-firmware";
-			reg = <0x100000 0x5700000>;
-		};
-
-		partition@5800000 {
-			compatible = "brcm,bcm4908-firmware";
-			reg = <0x5800000 0x5700000>;
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
deleted file mode 100644
index 967d2cd3c3ce..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ /dev/null
@@ -1,492 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/phy/phy.h>
-#include <dt-bindings/soc/bcm-pmb.h>
-
-/dts-v1/;
-
-/ {
-	interrupt-parent = <&gic>;
-
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "brcm,brahma-b53";
-			reg = <0x0>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0xfff8>;
-			next-level-cache = <&l2>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "brcm,brahma-b53";
-			reg = <0x1>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0xfff8>;
-			next-level-cache = <&l2>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "brcm,brahma-b53";
-			reg = <0x2>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0xfff8>;
-			next-level-cache = <&l2>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "brcm,brahma-b53";
-			reg = <0x3>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0xfff8>;
-			next-level-cache = <&l2>;
-		};
-
-		l2: l2-cache0 {
-			compatible = "cache";
-		};
-	};
-
-	axi@81000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00 0x00 0x81000000 0x4000>;
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,gic-400";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x1000 0x1000>,
-			      <0x2000 0x2000>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	};
-
-	clocks {
-		periph_clk: periph_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <50000000>;
-			clock-output-names = "periph";
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00 0x00 0x80000000 0x281000>;
-
-		enet: ethernet@2000 {
-			compatible = "brcm,bcm4908-enet";
-			reg = <0x2000 0x1000>;
-
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "rx", "tx";
-		};
-
-		usb_phy: usb-phy@c200 {
-			compatible = "brcm,bcm4908-usb-phy";
-			reg = <0xc200 0x100>;
-			reg-names = "ctrl";
-			power-domains = <&pmb BCM_PMB_HOST_USB>;
-			dr_mode = "host";
-			brcm,has-xhci;
-			brcm,has-eohci;
-			#phy-cells = <1>;
-			status = "disabled";
-		};
-
-		ehci: usb@c300 {
-			compatible = "generic-ehci";
-			reg = <0xc300 0x100>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&usb_phy PHY_TYPE_USB2>;
-			status = "disabled";
-		};
-
-		ohci: usb@c400 {
-			compatible = "generic-ohci";
-			reg = <0xc400 0x100>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&usb_phy PHY_TYPE_USB2>;
-			status = "disabled";
-		};
-
-		xhci: usb@d000 {
-			compatible = "generic-xhci";
-			reg = <0xd000 0x8c8>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&usb_phy PHY_TYPE_USB3>;
-			status = "disabled";
-		};
-
-		bus@80000 {
-			compatible = "simple-bus";
-			#size-cells = <1>;
-			#address-cells = <1>;
-			ranges = <0 0x80000 0x50000>;
-
-			ethernet-switch@0 {
-				compatible = "brcm,bcm4908-switch";
-				reg = <0x0 0x40000>,
-				      <0x40000 0x110>,
-				      <0x40340 0x30>,
-				      <0x40380 0x30>,
-				      <0x40600 0x34>,
-				      <0x40800 0x208>;
-				reg-names = "core", "reg", "intrl2_0",
-					    "intrl2_1", "fcb", "acb";
-				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-				brcm,num-gphy = <5>;
-				brcm,num-rgmii-ports = <2>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ports: ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-						phy-mode = "internal";
-						phy-handle = <&phy8>;
-					};
-
-					port@1 {
-						reg = <1>;
-						phy-mode = "internal";
-						phy-handle = <&phy9>;
-					};
-
-					port@2 {
-						reg = <2>;
-						phy-mode = "internal";
-						phy-handle = <&phy10>;
-					};
-
-					port@3 {
-						reg = <3>;
-						phy-mode = "internal";
-						phy-handle = <&phy11>;
-					};
-
-					port@8 {
-						reg = <8>;
-						phy-mode = "internal";
-						ethernet = <&enet>;
-
-						fixed-link {
-							speed = <1000>;
-							full-duplex;
-						};
-					};
-				};
-			};
-
-			mdio: mdio@405c0 {
-				compatible = "brcm,unimac-mdio";
-				reg = <0x405c0 0x8>;
-				reg-names = "mdio";
-				#size-cells = <0>;
-				#address-cells = <1>;
-
-				phy8: ethernet-phy@8 {
-					reg = <8>;
-				};
-
-				phy9: ethernet-phy@9 {
-					reg = <9>;
-				};
-
-				phy10: ethernet-phy@a {
-					reg = <10>;
-				};
-
-				phy11: ethernet-phy@b {
-					reg = <11>;
-				};
-
-				phy12: ethernet-phy@c {
-					reg = <12>;
-				};
-			};
-		};
-
-		procmon: syscon@280000 {
-			compatible = "simple-bus";
-			reg = <0x280000 0x1000>;
-			ranges;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			pmb: power-controller@2800c0 {
-				compatible = "brcm,bcm4908-pmb";
-				reg = <0x2800c0 0x40>;
-				#power-domain-cells = <1>;
-			};
-		};
-	};
-
-	bus@ff800000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00 0x00 0xff800000 0x3000>;
-
-		twd: timer-mfd@400 {
-			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
-			reg = <0x400 0x4c>;
-			ranges = <0x0 0x400 0x4c>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			watchdog@28 {
-				compatible = "brcm,bcm6345-wdt";
-				reg = <0x28 0x8>;
-			};
-		};
-
-		gpio0: gpio-controller@500 {
-			compatible = "brcm,bcm6345-gpio";
-			reg-names = "dirout", "dat";
-			reg = <0x500 0x28>, <0x528 0x28>;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
-		pinctrl@560 {
-			compatible = "brcm,bcm4908-pinctrl";
-			reg = <0x560 0x10>;
-
-			pins_led_0_a: led_0-a-pins {
-				function = "led_0";
-				groups = "led_0_grp_a";
-			};
-
-			pins_led_1_a: led_1-a-pins {
-				function = "led_1";
-				groups = "led_1_grp_a";
-			};
-
-			pins_led_2_a: led_2-a-pins {
-				function = "led_2";
-				groups = "led_2_grp_a";
-			};
-
-			pins_led_3_a: led_3-a-pins {
-				function = "led_3";
-				groups = "led_3_grp_a";
-			};
-
-			pins_led_4_a: led_4-a-pins {
-				function = "led_4";
-				groups = "led_4_grp_a";
-			};
-
-			pins_led_5_a: led_5-a-pins {
-				function = "led_5";
-				groups = "led_5_grp_a";
-			};
-
-			pins_led_6_a: led_6-a-pins {
-				function = "led_6";
-				groups = "led_6_grp_a";
-			};
-
-			pins_led_7_a: led_7-a-pins {
-				function = "led_7";
-				groups = "led_7_grp_a";
-			};
-
-			pins_led_8_a: led_8-a-pins {
-				function = "led_8";
-				groups = "led_8_grp_a";
-			};
-
-			pins_led_9_a: led_9-a-pins {
-				function = "led_9";
-				groups = "led_9_grp_a";
-			};
-
-			pins_led_21_a: led_21-a-pins {
-				function = "led_21";
-				groups = "led_21_grp_a";
-			};
-
-			pins_led_22_a: led_22-a-pins {
-				function = "led_22";
-				groups = "led_22_grp_a";
-			};
-
-			pins_led_26_a: led_26-a-pins {
-				function = "led_26";
-				groups = "led_26_grp_a";
-			};
-
-			pins_led_27_a: led_27-a-pins {
-				function = "led_27";
-				groups = "led_27_grp_a";
-			};
-
-			pins_led_28_a: led_28-a-pins {
-				function = "led_28";
-				groups = "led_28_grp_a";
-			};
-
-			pins_led_29_a: led_29-a-pins {
-				function = "led_29";
-				groups = "led_29_grp_a";
-			};
-
-			pins_led_30_a: led_30-a-pins {
-				function = "led_30";
-				groups = "led_30_grp_a";
-			};
-
-			pins_hs_uart: hs_uart-pins {
-				function = "hs_uart";
-				groups = "hs_uart_grp";
-			};
-
-			pins_i2c_a: i2c-a-pins {
-				function = "i2c";
-				groups = "i2c_grp_a";
-			};
-
-			pins_i2c_b: i2c-b-pins {
-				function = "i2c";
-				groups = "i2c_grp_b";
-			};
-
-			pins_i2s: i2s-pins {
-				function = "i2s";
-				groups = "i2s_grp";
-			};
-
-			pins_nand_ctrl: nand_ctrl-pins {
-				function = "nand_ctrl";
-				groups = "nand_ctrl_grp";
-			};
-
-			pins_nand_data: nand_data-pins {
-				function = "nand_data";
-				groups = "nand_data_grp";
-			};
-
-			pins_emmc_ctrl: emmc_ctrl-pins {
-				function = "emmc_ctrl";
-				groups = "emmc_ctrl_grp";
-			};
-
-			pins_usb0_pwr: usb0_pwr-pins {
-				function = "usb0_pwr";
-				groups = "usb0_pwr_grp";
-			};
-
-			pins_usb1_pwr: usb1_pwr-pins {
-				function = "usb1_pwr";
-				groups = "usb1_pwr_grp";
-			};
-		};
-
-		uart0: serial@640 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x640 0x18>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&periph_clk>;
-			clock-names = "refclk";
-			status = "okay";
-		};
-
-		nand-controller@1800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
-			reg = <0x1800 0x600>, <0x2000 0x10>;
-			reg-names = "nand", "nand-int-base";
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "nand";
-			status = "okay";
-
-			nandcs: nand@0 {
-				compatible = "brcm,nandcs";
-				reg = <0>;
-			};
-		};
-
-		i2c@2100 {
-			compatible = "brcm,brcmper-i2c";
-			reg = <0x2100 0x58>;
-			clock-frequency = <97500>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pins_i2c_a>;
-			status = "disabled";
-		};
-
-		misc@2600 {
-			compatible = "brcm,misc", "simple-mfd";
-			reg = <0x2600 0xe4>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00 0x2600 0xe4>;
-
-			reset-controller@2644 {
-				compatible = "brcm,bcm4908-misc-pcie-reset";
-				reg = <0x44 0x04>;
-				#reset-cells = <1>;
-			};
-		};
-	};
-
-	reboot {
-		compatible = "syscon-reboot";
-		regmap = <&twd>;
-		offset = <0x34>;
-		mask = <1>;
-	};
-};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
index 38f14307184b..9a8461d91c8c 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
@@ -1,5 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_BCMBCA) += \
+				bcm4906-netgear-r8000p.dtb \
+				bcm4906-tplink-archer-c2300-v1.dtb \
+				bcm4906-zyxel-ex3510b.dtb \
+				bcm4908-asus-gt-ac5300.dtb \
+				bcm4908-netgear-raxe500.dtb \
+				bcm94908.dtb \
 				bcm4912-asus-gt-ax6000.dtb \
 				bcm94912.dtb \
 				bcm963158.dtb \
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
index 2dd028438c22..a5f9ec92bd5e 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
@@ -7,7 +7,7 @@
 #include "bcm4906.dtsi"
 
 / {
-	compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908";
+	compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
 	model = "Netgear R8000P";
 
 	memory@0 {
@@ -58,12 +58,16 @@
 			function = "usb2";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
 		};
 
 		led-usb3 {
 			function = "usb3";
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>;
+			linux,default-trigger = "usbport";
 		};
 
 		led-wifi {
@@ -121,6 +125,11 @@
 	};
 };
 
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
 &nandcs {
 	nand-ecc-strength = <4>;
 	nand-ecc-step-size = <512>;
@@ -135,16 +144,20 @@
 		#size-cells = <1>;
 
 		partition@0 {
-			compatible = "nvmem-cells";
 			label = "cferom";
 			reg = <0x0 0x100000>;
-
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x0 0x100000>;
 
-			base_mac_addr: mac@106a0 {
-				reg = <0x106a0 0x6>;
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				base_mac_addr: mac@106a0 {
+					reg = <0x106a0 0x6>;
+				};
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
index 064f7f549665..19fc03ef47a0 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
@@ -7,7 +7,7 @@
 #include "bcm4906.dtsi"
 
 / {
-	compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908";
+	compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
 	model = "TP-Link Archer C2300 V1";
 
 	memory@0 {
@@ -64,12 +64,16 @@
 			function = "usb2";
 			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
 		};
 
 		led-usb3 {
-			function = "usbd3";
+			function = "usb3";
 			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>;
+			linux,default-trigger = "usbport";
 		};
 
 		led-brightness {
@@ -151,6 +155,11 @@
 	};
 };
 
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
 &nandcs {
 	nand-ecc-strength = <4>;
 	nand-ecc-step-size = <512>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-zyxel-ex3510b.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-zyxel-ex3510b.dts
new file mode 100644
index 000000000000..54e453bd09f7
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-zyxel-ex3510b.dts
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "bcm4906.dtsi"
+
+/ {
+	compatible = "zyxel,ex3510b", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
+	model = "Zyxel EX3510-B";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x20000000>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		key-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		key-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&leds {
+	pinctrl-0 = <&pins_led_0_a>, <&pins_led_2_a>, <&pins_led_3_a>,
+		    <&pins_led_4_a>, <&pins_led_10_a>, <&pins_led_12_a>,
+		    <&pins_led_14_a>, <&pins_led_15_a>, <&pins_led_21_a>;
+	pinctrl-names = "default";
+
+	led@0 {
+		reg = <0x0>;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_RED>;
+	};
+
+	led@2 {
+		reg = <0x2>;
+		function = LED_FUNCTION_WAN_ONLINE;
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@3 {
+		reg = <0x3>;
+		function = LED_FUNCTION_WAN_ONLINE;
+		color = <LED_COLOR_ID_RED>;
+	};
+
+	led@4 {
+		reg = <0x4>;
+		function = LED_FUNCTION_USB;
+		color = <LED_COLOR_ID_GREEN>;
+		trigger-sources = <&ohci_port1>, <&ohci_port2>,
+				  <&ehci_port1>, <&ehci_port2>,
+				  <&xhci_port1>, <&xhci_port2>;
+		linux,default-trigger = "usbport";
+	};
+
+	led@a {
+		reg = <0xa>;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_GREEN>;
+		linux,default-trigger = "default-on";
+	};
+
+	led@c {
+		reg = <0xc>;
+		function = LED_FUNCTION_LAN;
+		color = <LED_COLOR_ID_GREEN>;
+		active-low;
+	};
+
+	led@e {
+		reg = <0xe>;
+		function = LED_FUNCTION_WPS;
+		color = <LED_COLOR_ID_GREEN>;
+		active-low;
+	};
+
+	led@f {
+		reg = <0xf>;
+		function = LED_FUNCTION_WPS;
+		color = <LED_COLOR_ID_RED>;
+		active-low;
+	};
+
+	led@15 {
+		reg = <0x15>;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_GREEN>;
+		active-low;
+	};
+};
+
+&enet {
+	nvmem-cells = <&base_mac_addr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&usb_phy {
+	brcm,ioc = <1>;
+	brcm,ipp = <1>;
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&ports {
+	port@0 {
+		label = "lan1";
+	};
+
+	port@1 {
+		label = "lan2";
+	};
+
+	port@2 {
+		label = "lan3";
+	};
+
+	port@3 {
+		label = "lan4";
+	};
+
+	port@7 {
+		reg = <7>;
+		phy-mode = "internal";
+		phy-handle = <&phy12>;
+		label = "wan";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+};
+
+&nandcs {
+	brcm,nand-oob-sector-size = <27>;
+	nand-ecc-strength = <8>;
+	nand-ecc-step-size = <512>;
+	nand-on-flash-bbt;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	partitions {
+		compatible = "brcm,bcm4908-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			compatible = "nvmem-cells";
+			label = "cferom";
+			reg = <0x0 0x100000>;
+			read-only;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			base_mac_addr: mac@106a0 {
+				reg = <0x106a0 0x6>;
+			};
+		};
+
+		partition@100000 {
+			compatible = "brcm,bcm4908-firmware";
+			reg = <0x100000 0x5f80000>;
+		};
+
+		partition@6080000 {
+			compatible = "brcm,bcm4908-firmware";
+			reg = <0x6080000 0x5f80000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
index d084c33d5ca8..d084c33d5ca8 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
new file mode 100644
index 000000000000..2a0d4ee3bd79
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "bcm4908.dtsi"
+
+/ {
+	compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca";
+	model = "Asus GT-AC5300";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00 0x00 0x40000000>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		key-wifi {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+
+		key-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+
+		key-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+		};
+
+		key-brightness {
+			label = "LEDs";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&enet {
+	nvmem-cells = <&base_mac_addr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&usb_phy {
+	brcm,ioc = <1>;
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&ports {
+	port@0 {
+		label = "lan2";
+	};
+
+	port@1 {
+		label = "lan1";
+	};
+
+	port@2 {
+		label = "lan6";
+	};
+
+	port@3 {
+		label = "lan5";
+	};
+
+	/* External BCM53134S switch */
+	port@7 {
+		label = "sw";
+		reg = <7>;
+		phy-mode = "rgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+		};
+	};
+};
+
+&mdio {
+	/* lan8 */
+	ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	/* lan7 */
+	ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	/* lan4 */
+	ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	/* lan3 */
+	ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&leds {
+	led@11 {
+		reg = <0x11>;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_WHITE>;
+		default-state = "on";
+		active-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_17_a>;
+	};
+
+	led@12 {
+		reg = <0x12>;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_RED>;
+		active-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_18_a>;
+	};
+
+	led@14 {
+		reg = <0x14>;
+		function = LED_FUNCTION_WPS;
+		color = <LED_COLOR_ID_WHITE>;
+		active-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_20_a>;
+	};
+
+	led@15 {
+		reg = <0x15>;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_WHITE>;
+		active-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_21_a>;
+	};
+
+	led@19 {
+		reg = <0x19>;
+		function = LED_FUNCTION_LAN;
+		color = <LED_COLOR_ID_WHITE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_25_a>;
+	};
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+	nand-on-flash-bbt;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	partitions {
+		compatible = "brcm,bcm4908-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "cferom";
+			reg = <0x0 0x100000>;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				base_mac_addr: mac@106a0 {
+					reg = <0x106a0 0x6>;
+				};
+			};
+		};
+
+		partition@100000 {
+			compatible = "brcm,bcm4908-firmware";
+			reg = <0x100000 0x5700000>;
+		};
+
+		partition@5800000 {
+			compatible = "brcm,bcm4908-firmware";
+			reg = <0x5800000 0x5700000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
index 3c2cf2d238b6..23b96c663239 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
@@ -3,7 +3,7 @@
 #include "bcm4908.dtsi"
 
 / {
-	compatible = "netgear,raxe500", "brcm,bcm4908";
+	compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca";
 	model = "Netgear RAXE500";
 
 	memory@0 {
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
new file mode 100644
index 000000000000..3b7595fd4e81
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
@@ -0,0 +1,757 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/soc/bcm-pmb.h>
+
+/dts-v1/;
+
+/ {
+	interrupt-parent = <&gic>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b53";
+			reg = <0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0xff8>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b53";
+			reg = <0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0xff8>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b53";
+			reg = <0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0xff8>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b53";
+			reg = <0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0xff8>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cfe-stub@0 {
+			reg = <0x0 0x0 0x0 0x1000>;
+		};
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x81000000 0x4000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+			      <0x2000 0x2000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	clocks {
+		periph_clk: periph_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x80000000 0x281000>;
+
+		enet: ethernet@2000 {
+			compatible = "brcm,bcm4908-enet";
+			reg = <0x2000 0x1000>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "rx", "tx";
+		};
+
+		usb_phy: usb-phy@c200 {
+			compatible = "brcm,bcm4908-usb-phy";
+			reg = <0xc200 0x100>;
+			reg-names = "ctrl";
+			power-domains = <&pmb BCM_PMB_HOST_USB>;
+			dr_mode = "host";
+			brcm,has-xhci;
+			brcm,has-eohci;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		ehci: usb@c300 {
+			compatible = "generic-ehci";
+			reg = <0xc300 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb_phy PHY_TYPE_USB2>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ehci_port1: port@1 {
+				reg = <1>;
+				#trigger-source-cells = <0>;
+			};
+
+			ehci_port2: port@2 {
+				reg = <2>;
+				#trigger-source-cells = <0>;
+			};
+		};
+
+		ohci: usb@c400 {
+			compatible = "generic-ohci";
+			reg = <0xc400 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb_phy PHY_TYPE_USB2>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ohci_port1: port@1 {
+				reg = <1>;
+				#trigger-source-cells = <0>;
+			};
+
+			ohci_port2: port@2 {
+				reg = <2>;
+				#trigger-source-cells = <0>;
+			};
+		};
+
+		xhci: usb@d000 {
+			compatible = "generic-xhci";
+			reg = <0xd000 0x8c8>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb_phy PHY_TYPE_USB3>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			xhci_port1: port@1 {
+				reg = <1>;
+				#trigger-source-cells = <0>;
+			};
+
+			xhci_port2: port@2 {
+				reg = <2>;
+				#trigger-source-cells = <0>;
+			};
+		};
+
+		bus@80000 {
+			compatible = "simple-bus";
+			#size-cells = <1>;
+			#address-cells = <1>;
+			ranges = <0 0x80000 0x50000>;
+
+			ethernet-switch@0 {
+				compatible = "brcm,bcm4908-switch";
+				reg = <0x0 0x40000>,
+				      <0x40000 0x110>,
+				      <0x40340 0x30>,
+				      <0x40380 0x30>,
+				      <0x40600 0x34>,
+				      <0x40800 0x208>;
+				reg-names = "core", "reg", "intrl2_0",
+					    "intrl2_1", "fcb", "acb";
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				brcm,num-gphy = <5>;
+				brcm,num-rgmii-ports = <2>;
+
+				ports: ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						phy-mode = "internal";
+						phy-handle = <&phy8>;
+					};
+
+					port@1 {
+						reg = <1>;
+						phy-mode = "internal";
+						phy-handle = <&phy9>;
+					};
+
+					port@2 {
+						reg = <2>;
+						phy-mode = "internal";
+						phy-handle = <&phy10>;
+					};
+
+					port@3 {
+						reg = <3>;
+						phy-mode = "internal";
+						phy-handle = <&phy11>;
+					};
+
+					port@8 {
+						reg = <8>;
+						phy-mode = "internal";
+						ethernet = <&enet>;
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+
+			mdio: mdio@405c0 {
+				compatible = "brcm,unimac-mdio";
+				reg = <0x405c0 0x8>;
+				reg-names = "mdio";
+				#size-cells = <0>;
+				#address-cells = <1>;
+
+				phy8: ethernet-phy@8 {
+					reg = <8>;
+				};
+
+				phy9: ethernet-phy@9 {
+					reg = <9>;
+				};
+
+				phy10: ethernet-phy@a {
+					reg = <10>;
+				};
+
+				phy11: ethernet-phy@b {
+					reg = <11>;
+				};
+
+				phy12: ethernet-phy@c {
+					reg = <12>;
+				};
+			};
+		};
+
+		procmon: bus@280000 {
+			compatible = "simple-bus";
+			reg = <0x280000 0x1000>;
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pmb: power-controller@2800c0 {
+				compatible = "brcm,bcm4908-pmb";
+				reg = <0x2800c0 0x40>;
+				#power-domain-cells = <1>;
+			};
+		};
+	};
+
+	/* PERF Peripherals */
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0xff800000 0x400000>;
+
+		twd: timer-mfd@400 {
+			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+			reg = <0x400 0x4c>;
+			ranges = <0x0 0x400 0x4c>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			timer@0 {
+				compatible = "brcm,bcm63138-timer";
+				reg = <0x0 0x28>;
+			};
+
+			watchdog@28 {
+				compatible = "brcm,bcm6345-wdt";
+				reg = <0x28 0x8>;
+			};
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x540 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x544 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 256 .. 287 */
+		gpio8: gpio@520 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x520 0x04>, <0x548 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 288 .. 319 */
+		gpio9: gpio@524 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x524 0x04>, <0x54c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		pinctrl@560 {
+			compatible = "brcm,bcm4908-pinctrl";
+			reg = <0x560 0x10>;
+
+			pins_led_0_a: led_0-a-pins {
+				function = "led_0";
+				groups = "led_0_grp_a";
+			};
+
+			pins_led_1_a: led_1-a-pins {
+				function = "led_1";
+				groups = "led_1_grp_a";
+			};
+
+			pins_led_2_a: led_2-a-pins {
+				function = "led_2";
+				groups = "led_2_grp_a";
+			};
+
+			pins_led_3_a: led_3-a-pins {
+				function = "led_3";
+				groups = "led_3_grp_a";
+			};
+
+			pins_led_4_a: led_4-a-pins {
+				function = "led_4";
+				groups = "led_4_grp_a";
+			};
+
+			pins_led_5_a: led_5-a-pins {
+				function = "led_5";
+				groups = "led_5_grp_a";
+			};
+
+			pins_led_6_a: led_6-a-pins {
+				function = "led_6";
+				groups = "led_6_grp_a";
+			};
+
+			pins_led_7_a: led_7-a-pins {
+				function = "led_7";
+				groups = "led_7_grp_a";
+			};
+
+			pins_led_8_a: led_8-a-pins {
+				function = "led_8";
+				groups = "led_8_grp_a";
+			};
+
+			pins_led_9_a: led_9-a-pins {
+				function = "led_9";
+				groups = "led_9_grp_a";
+			};
+
+			pins_led_10_a: led_10-a-pins {
+				function = "led_10";
+				groups = "led_10_grp_a";
+			};
+
+			pins_led_11_a: led_11-a-pins {
+				function = "led_11";
+				groups = "led_11_grp_a";
+			};
+
+			pins_led_12_a: led_12-a-pins {
+				function = "led_12";
+				groups = "led_12_grp_a";
+			};
+
+			pins_led_13_a: led_13-a-pins {
+				function = "led_13";
+				groups = "led_13_grp_a";
+			};
+
+			pins_led_14_a: led_14-a-pins {
+				function = "led_14";
+				groups = "led_14_grp_a";
+			};
+
+			pins_led_15_a: led_15-a-pins {
+				function = "led_15";
+				groups = "led_15_grp_a";
+			};
+
+			pins_led_16_a: led_16-a-pins {
+				function = "led_16";
+				groups = "led_16_grp_a";
+			};
+
+			pins_led_17_a: led_17-a-pins {
+				function = "led_17";
+				groups = "led_17_grp_a";
+			};
+
+			pins_led_18_a: led_18-a-pins {
+				function = "led_18";
+				groups = "led_18_grp_a";
+			};
+
+			pins_led_19_a: led_19-a-pins {
+				function = "led_19";
+				groups = "led_19_grp_a";
+			};
+
+			pins_led_20_a: led_20-a-pins {
+				function = "led_20";
+				groups = "led_20_grp_a";
+			};
+
+			pins_led_21_a: led_21-a-pins {
+				function = "led_21";
+				groups = "led_21_grp_a";
+			};
+
+			pins_led_22_a: led_22-a-pins {
+				function = "led_22";
+				groups = "led_22_grp_a";
+			};
+
+			pins_led_23_a: led_23-a-pins {
+				function = "led_23";
+				groups = "led_23_grp_a";
+			};
+
+			pins_led_24_a: led_24-a-pins {
+				function = "led_24";
+				groups = "led_24_grp_a";
+			};
+
+			pins_led_25_a: led_25-a-pins {
+				function = "led_25";
+				groups = "led_25_grp_a";
+			};
+
+			pins_led_26_a: led_26-a-pins {
+				function = "led_26";
+				groups = "led_26_grp_a";
+			};
+
+			pins_led_27_a: led_27-a-pins {
+				function = "led_27";
+				groups = "led_27_grp_a";
+			};
+
+			pins_led_28_a: led_28-a-pins {
+				function = "led_28";
+				groups = "led_28_grp_a";
+			};
+
+			pins_led_29_a: led_29-a-pins {
+				function = "led_29";
+				groups = "led_29_grp_a";
+			};
+
+			pins_led_30_a: led_30-a-pins {
+				function = "led_30";
+				groups = "led_30_grp_a";
+			};
+
+			pins_led_31_a: led_31-a-pins {
+				function = "led_31";
+				groups = "led_31_grp_a";
+			};
+
+			pins_hs_uart: hs_uart-pins {
+				function = "hs_uart";
+				groups = "hs_uart_grp";
+			};
+
+			pins_i2c_a: i2c-a-pins {
+				function = "i2c";
+				groups = "i2c_grp_a";
+			};
+
+			pins_i2c_b: i2c-b-pins {
+				function = "i2c";
+				groups = "i2c_grp_b";
+			};
+
+			pins_i2s: i2s-pins {
+				function = "i2s";
+				groups = "i2s_grp";
+			};
+
+			pins_nand_ctrl: nand_ctrl-pins {
+				function = "nand_ctrl";
+				groups = "nand_ctrl_grp";
+			};
+
+			pins_nand_data: nand_data-pins {
+				function = "nand_data";
+				groups = "nand_data_grp";
+			};
+
+			pins_emmc_ctrl: emmc_ctrl-pins {
+				function = "emmc_ctrl";
+				groups = "emmc_ctrl_grp";
+			};
+
+			pins_usb0_pwr: usb0_pwr-pins {
+				function = "usb0_pwr";
+				groups = "usb0_pwr_grp";
+			};
+
+			pins_usb1_pwr: usb1_pwr-pins {
+				function = "usb1_pwr";
+				groups = "usb1_pwr_grp";
+			};
+		};
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x18>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "okay";
+		};
+
+		leds: leds@800 {
+			compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm4908-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "nand_ctlrdy";
+			brcm,wp-not-connected;
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		i2c@2100 {
+			compatible = "brcm,brcmper-i2c";
+			reg = <0x2100 0x58>;
+			clock-frequency = <97500>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pins_i2c_a>;
+			status = "disabled";
+		};
+
+		misc@2600 {
+			compatible = "brcm,misc", "simple-mfd";
+			reg = <0x2600 0xe4>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00 0x2600 0xe4>;
+
+			reset-controller@2644 {
+				compatible = "brcm,bcm4908-misc-pcie-reset";
+				reg = <0x44 0x04>;
+				#reset-cells = <1>;
+			};
+		};
+
+		pl081_dma: dma-controller@59000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x59000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&twd>;
+		offset = <0x34>;
+		mask = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
index 3d016c2ce675..14b2adfb817c 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
@@ -51,6 +51,8 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -78,6 +80,7 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
 		uart_clk: uart-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -85,6 +88,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -116,6 +125,33 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm4912-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
index 04de96bd0a03..589b8a1efc72 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
@@ -35,6 +35,8 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -59,6 +61,7 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
 		uart_clk: uart-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -66,6 +69,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -98,6 +107,32 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63146-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
index 13629702f70b..a441388c0cd2 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright 2022 Broadcom Ltd.
+ * This DTSI is for the B0 and later revision of the SoC
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -51,6 +52,8 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -78,6 +81,7 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
 		uart_clk: uart-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -85,6 +89,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 
 	psci {
@@ -116,6 +126,142 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0xff800000 0x800000>;
 
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+
+		leds: led-controller@800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63158-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		/* B0 AHB Peripherals */
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		/* B0 ARM UART Peripheral block */
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
@@ -124,5 +270,23 @@
 			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
+
+		uart1: serial@13000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x13000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@14000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x14000 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
index c3e6197be808..1d1303cf90f3 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
@@ -51,6 +51,8 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -78,6 +80,7 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
 		uart_clk: uart-clk {
 			compatible = "fixed-factor-clock";
 			#clock-cells = <0>;
@@ -85,6 +88,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
 	};
 
 	psci {
@@ -116,6 +125,33 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0xff800000 0x800000>;
 
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6813-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
index 0bce6497219f..dcbd0fdd33d2 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
@@ -35,6 +35,8 @@
 
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -59,6 +61,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 
 	psci {
@@ -85,11 +93,103 @@
 		};
 	};
 
+	/* PERF Peripherals */
 	bus@ff800000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x0 0x0 0xff800000 0x800000>;
+		ranges = <0x0 0x0 0xff800000 0x400000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		watchdog@4c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x4c0 0x10>;
+			status = "disabled";
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
 
 		uart0: serial@640 {
 			compatible = "brcm,bcm6345-uart";
@@ -99,5 +199,67 @@
 			clock-names = "refclk";
 			status = "disabled";
 		};
+
+		uart1: serial@660 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x660 0x18>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		leds: led-controller@800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6856-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		pl081_dma: dma-controller@59000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x59000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
index 29a880c6c858..c105a734a648 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
@@ -50,6 +50,8 @@
 		};
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -77,6 +79,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 
 	psci {
@@ -103,11 +111,111 @@
 		};
 	};
 
+	/* PERF Peripherals */
 	bus@ff800000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x0 0x0 0xff800000 0x62000>;
+		ranges = <0x0 0x0 0xff800000 0x400000>;
+
+		twd: timer-mfd@400 {
+			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+			reg = <0x400 0x4c>;
+			ranges = <0x0 0x400 0x4c>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			timer@0 {
+				compatible = "brcm,bcm63138-timer";
+				reg = <0x0 0x28>;
+			};
+
+			watchdog@28 {
+				compatible = "brcm,bcm6345-wdt";
+				reg = <0x28 0x8>;
+			};
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
 
 		uart0: serial@640 {
 			compatible = "brcm,bcm6345-uart";
@@ -117,5 +225,67 @@
 			clock-names = "refclk";
 			status = "disabled";
 		};
+
+		uart1: serial@660 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x660 0x18>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		leds: led-controller@800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6858-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		pl081_dma: dma-controller@59000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x59000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
new file mode 100644
index 000000000000..e5b37643296b
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm4908.dtsi"
+
+/ {
+	model = "Broadcom BCM94908 Reference Board";
+	compatible = "brcm,bcm94908", "brcm,bcm4908", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
index a3623e6f6919..4b779e6c22e1 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
@@ -28,3 +28,17 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
index e39f1e6d4774..2851e8e41bf4 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
@@ -28,3 +28,17 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
index eba07e0b1ca6..17dc594fe83f 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
@@ -28,3 +28,17 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
index af17091ae764..34832a734734 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
@@ -28,3 +28,17 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
index 032aeb75c983..e1396b5544b7 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
@@ -28,3 +28,17 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
index 0cbf582f5d54..30bbf6f2917e 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
@@ -28,3 +28,17 @@
 &uart0 {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
index e34172e3117e..5939d342aec7 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
@@ -50,9 +50,9 @@
 		bootargs = "earlycon=uart8250,mmio32,0x66130000";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
-		reg = <0x000000000 0x80000000 0x00000000 0x40000000>;
+		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
 	};
 };
 
@@ -113,7 +113,6 @@
 		spi-max-frequency = <5000000>;
 		spi-cpha;
 		spi-cpol;
-		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
 		pl022,slave-tx-disable = <0>;
 		pl022,com-mode = <0>;
@@ -137,9 +136,7 @@
 		at25,page-size = <64>;
 		spi-cpha;
 		spi-cpol;
-		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
-		pl022,slave-tx-disable = <0>;
 		pl022,com-mode = <0>;
 		pl022,rx-level-trig = <1>;
 		pl022,tx-level-trig = <1>;
@@ -202,7 +199,6 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
index 7bf26f3e36bf..0e134a94e142 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
@@ -47,9 +47,9 @@
 		bootargs = "earlycon=uart8250,mmio32,0x66130000";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
-		reg = <0x000000000 0x80000000 0x00000001 0x00000000>;
+		reg = <0x00000000 0x80000000 0x00000001 0x00000000>;
 	};
 };
 
@@ -114,7 +114,7 @@
 			reg = <0x04000000 0x06400000>; /*  100MB */
 		};
 
-		partition@a400000{
+		partition@a400000 {
 			label = "ncustfs";
 			reg = <0x0a400000 0x35c00000>; /*  860MB */
 		};
@@ -151,7 +151,6 @@
 		#size-cells = <1>;
 		compatible = "m25p80";
 		spi-max-frequency = <62500000>;
-		m25p,default-addr-width = <3>;
 		reg = <0x0 0x0>;
 
 		partition@0 {
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index fda97c47f4e9..9888a1fabd5c 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -79,6 +79,8 @@
 
 		CLUSTER0_L2: l2-cache@0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -100,7 +102,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a57-pmu";
 		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
@@ -132,7 +134,6 @@
 		brcm,pcie-ob;
 		brcm,pcie-ob-oarr-size;
 		brcm,pcie-ob-axi-offset = <0x00000000>;
-		brcm,pcie-ob-window-size = <256>;
 
 		status = "disabled";
 
@@ -163,7 +164,6 @@
 		brcm,pcie-ob;
 		brcm,pcie-ob-oarr-size;
 		brcm,pcie-ob-axi-offset = <0x30000000>;
-		brcm,pcie-ob-window-size = <256>;
 
 		status = "disabled";
 
@@ -293,7 +293,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		smmu: mmu@64000000 {
+		smmu: iommu@64000000 {
 			compatible = "arm,mmu-500";
 			reg = <0x64000000 0x40000>;
 			#global-interrupts = <2>;
@@ -367,7 +367,6 @@
 
 			v2m0: v2m@0 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x00000 0x1000>;
 				arm,msi-base-spi = <72>;
@@ -376,7 +375,6 @@
 
 			v2m1: v2m@10000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x10000 0x1000>;
 				arm,msi-base-spi = <88>;
@@ -385,7 +383,6 @@
 
 			v2m2: v2m@20000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x20000 0x1000>;
 				arm,msi-base-spi = <104>;
@@ -394,7 +391,6 @@
 
 			v2m3: v2m@30000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x30000 0x1000>;
 				arm,msi-base-spi = <120>;
@@ -403,7 +399,6 @@
 
 			v2m4: v2m@40000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x40000 0x1000>;
 				arm,msi-base-spi = <136>;
@@ -412,7 +407,6 @@
 
 			v2m5: v2m@50000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x50000 0x1000>;
 				arm,msi-base-spi = <152>;
@@ -421,7 +415,6 @@
 
 			v2m6: v2m@60000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x60000 0x1000>;
 				arm,msi-base-spi = <168>;
@@ -430,7 +423,6 @@
 
 			v2m7: v2m@70000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x70000 0x1000>;
 				arm,msi-base-spi = <184>;
@@ -584,6 +576,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/arch/arm64/boot/dts/broadcom/rp1-common.dtsi b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
new file mode 100644
index 000000000000..5a815c379794
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/raspberrypi,rp1-clocks.h>
+
+pci_ep_bus: pci-ep-bus@1 {
+	compatible = "simple-bus";
+	ranges = <0x00 0x40000000  0x01 0x00 0x00000000  0x00 0x00400000>;
+	dma-ranges = <0x10 0x00000000  0x43000000 0x10 0x00000000  0x10 0x00000000>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	rp1_clocks: clocks@40018000 {
+		compatible = "raspberrypi,rp1-clocks";
+		reg = <0x00 0x40018000 0x0 0x10038>;
+		#clock-cells = <1>;
+		clocks = <&clk_rp1_xosc>;
+		assigned-clocks = <&rp1_clocks RP1_PLL_SYS_CORE>,
+				  <&rp1_clocks RP1_PLL_SYS>,
+				  <&rp1_clocks RP1_PLL_SYS_SEC>,
+				  <&rp1_clocks RP1_CLK_SYS>;
+		assigned-clock-rates = <1000000000>, // RP1_PLL_SYS_CORE
+				       <200000000>,  // RP1_PLL_SYS
+				       <125000000>,  // RP1_PLL_SYS_SEC
+				       <200000000>;  // RP1_CLK_SYS
+	};
+
+	rp1_gpio: pinctrl@400d0000 {
+		compatible = "raspberrypi,rp1-gpio";
+		reg = <0x00 0x400d0000  0x0 0xc000>,
+		      <0x00 0x400e0000  0x0 0xc000>,
+		      <0x00 0x400f0000  0x0 0xc000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+			     <1 IRQ_TYPE_LEVEL_HIGH>,
+			     <2 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	rp1_eth: ethernet@40100000 {
+		compatible = "raspberrypi,rp1-gem";
+		reg = <0x00 0x40100000  0x0 0x4000>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rp1_clocks RP1_CLK_SYS>,
+			 <&rp1_clocks RP1_CLK_SYS>,
+			 <&rp1_clocks RP1_CLK_ETH>,
+			 <&rp1_clocks RP1_CLK_ETH_TSU>;
+		clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	rp1_usb0: usb@40200000 {
+		compatible = "snps,dwc3";
+		reg = <0x00 0x40200000  0x0 0x100000>;
+		interrupts = <31 IRQ_TYPE_EDGE_RISING>;
+		dr_mode = "host";
+		usb3-lpm-capable;
+		snps,dis_rxdet_inp3_quirk;
+		snps,parkmode-disable-hs-quirk;
+		snps,parkmode-disable-ss-quirk;
+		snps,tx-max-burst = /bits/ 8 <8>;
+		snps,tx-thr-num-pkt = /bits/ 8 <2>;
+		status = "disabled";
+	};
+
+	rp1_usb1: usb@40300000 {
+		compatible = "snps,dwc3";
+		reg = <0x00 0x40300000  0x0 0x100000>;
+		interrupts = <36 IRQ_TYPE_EDGE_RISING>;
+		dr_mode = "host";
+		usb3-lpm-capable;
+		snps,dis_rxdet_inp3_quirk;
+		snps,parkmode-disable-hs-quirk;
+		snps,parkmode-disable-ss-quirk;
+		snps,tx-max-burst = /bits/ 8 <8>;
+		snps,tx-thr-num-pkt = /bits/ 8 <2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi b/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi
new file mode 100644
index 000000000000..0ef30d7f1c35
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+rp1_nexus {
+	compatible = "pci1de4,1";
+	#address-cells = <3>;
+	#size-cells = <2>;
+	ranges = <0x01 0x00 0x00000000
+		  0x02000000 0x00 0x00000000
+		  0x0 0x400000>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	#include "rp1-common.dtsi"
+};
diff --git a/arch/arm64/boot/dts/broadcom/rp1.dtso b/arch/arm64/boot/dts/broadcom/rp1.dtso
new file mode 100644
index 000000000000..ab4f146d22c0
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/rp1.dtso
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+/plugin/;
+
+&pcie2 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	#include "rp1-nexus.dtsi"
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts
index a41facd7d79b..66471a25e4ac 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /*
  *Copyright(c) 2018 Broadcom
  */
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi
index 82a24711d0d8..cdd709491f01 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /*
  *  Copyright(c) 2016-2018 Broadcom
  */
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi
index 33a472ab17e8..663e51756746 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /*
  *Copyright(c) 2018 Broadcom
  */
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
index 56789ccf9454..46a827521921 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
@@ -44,7 +44,7 @@
 			compatible = "pinctrl-single";
 			reg = <0x0014029c 0x26c>;
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <0xf>;
 			pinctrl-single,gpio-range = <
@@ -56,14 +56,14 @@
 			};
 
 			/* pinctrl functions */
-			tsio_pins: pinmux_gpio_14 {
+			tsio_pins: gpio-14-pins {
 				pinctrl-single,pins = <
 					0x038 MODE_NITRO /* tsio_0 */
 					0x03c MODE_NITRO /* tsio_1 */
 				>;
 			};
 
-			nor_pins: pinmux_pnor_adv_n {
+			nor_pins: pnor-adv-n-pins {
 				pinctrl-single,pins = <
 					0x0ac MODE_PNOR /* nand_ce1_n */
 					0x0b0 MODE_PNOR /* nand_ce0_n */
@@ -119,7 +119,7 @@
 				>;
 			};
 
-			nand_pins: pinmux_nand_ce1_n {
+			nand_pins: nand-ce1-n-pins {
 				pinctrl-single,pins = <
 					0x0ac MODE_NAND /* nand_ce1_n */
 					0x0b0 MODE_NAND /* nand_ce0_n */
@@ -148,59 +148,59 @@
 				>;
 			};
 
-			pwm0_pins: pinmux_pwm_0 {
+			pwm0_pins: pwm-0-pins {
 				pinctrl-single,pins = <
 					0x10c MODE_NITRO
 				>;
 			};
 
-			pwm1_pins: pinmux_pwm_1 {
+			pwm1_pins: pwm-1-pins {
 				pinctrl-single,pins = <
 					0x110 MODE_NITRO
 				>;
 			};
 
-			pwm2_pins: pinmux_pwm_2 {
+			pwm2_pins: pwm-2-pins {
 				pinctrl-single,pins = <
 					0x114 MODE_NITRO
 				>;
 			};
 
-			pwm3_pins: pinmux_pwm_3 {
+			pwm3_pins: pwm-3-pins {
 				pinctrl-single,pins = <
 					0x118 MODE_NITRO
 				>;
 			};
 
-			dbu_rxd_pins: pinmux_uart1_sin_nitro {
+			dbu_rxd_pins: uart1-sin-nitro-pins {
 				pinctrl-single,pins = <
 					0x11c MODE_NITRO /* dbu_rxd */
 					0x120 MODE_NITRO /* dbu_txd */
 				>;
 			};
 
-			uart1_pins: pinmux_uart1_sin_nand {
+			uart1_pins: uart1-sin-nand-pins {
 				pinctrl-single,pins = <
 					0x11c MODE_NAND /* uart1_sin */
 					0x120 MODE_NAND /* uart1_out */
 				>;
 			};
 
-			uart2_pins: pinmux_uart2_sin {
+			uart2_pins: uart2-sin-pins {
 				pinctrl-single,pins = <
 					0x124 MODE_NITRO /* uart2_sin */
 					0x128 MODE_NITRO /* uart2_out */
 				>;
 			};
 
-			uart3_pins: pinmux_uart3_sin {
+			uart3_pins: uart3-sin-pins {
 				pinctrl-single,pins = <
 					0x12c MODE_NITRO /* uart3_sin */
 					0x130 MODE_NITRO /* uart3_out */
 				>;
 			};
 
-			i2s_pins: pinmux_i2s_bitclk {
+			i2s_pins: i2s-bitclk-pins {
 				pinctrl-single,pins = <
 					0x134 MODE_NITRO /* i2s_bitclk */
 					0x138 MODE_NITRO /* i2s_sdout */
@@ -211,7 +211,7 @@
 				>;
 			};
 
-			qspi_pins: pinumx_qspi_hold_n {
+			qspi_pins: qspi-hold-n-pins {
 				pinctrl-single,pins = <
 					0x14c MODE_NAND /* qspi_hold_n */
 					0x150 MODE_NAND /* qspi_wp_n */
@@ -222,28 +222,28 @@
 				>;
 			};
 
-			mdio_pins: pinumx_ext_mdio {
+			mdio_pins: ext-mdio-pins {
 				pinctrl-single,pins = <
 					0x164 MODE_NITRO /* ext_mdio */
 					0x168 MODE_NITRO /* ext_mdc */
 				>;
 			};
 
-			i2c0_pins: pinmux_i2c0_sda {
+			i2c0_pins: i2c0-sda-pins {
 				pinctrl-single,pins = <
 					0x16c MODE_NITRO /* i2c0_sda */
 					0x170 MODE_NITRO /* i2c0_scl */
 				>;
 			};
 
-			i2c1_pins: pinmux_i2c1_sda {
+			i2c1_pins: i2c1-sda-pins {
 				pinctrl-single,pins = <
 					0x174 MODE_NITRO /* i2c1_sda */
 					0x178 MODE_NITRO /* i2c1_scl */
 				>;
 			};
 
-			sdio0_pins: pinmux_sdio0_cd_l {
+			sdio0_pins: sdio0-cd-l-pins {
 				pinctrl-single,pins = <
 					0x17c MODE_NITRO /* sdio0_cd_l */
 					0x180 MODE_NITRO /* sdio0_clk_sdcard */
@@ -262,7 +262,7 @@
 				>;
 			};
 
-			sdio1_pins: pinmux_sdio1_cd_l {
+			sdio1_pins: sdio1-cd-l-pins {
 				pinctrl-single,pins = <
 					0x1b4 MODE_NITRO /* sdio1_cd_l */
 					0x1b8 MODE_NITRO /* sdio1_clk_sdcard */
@@ -281,7 +281,7 @@
 				>;
 			};
 
-			spi0_pins: pinmux_spi0_sck_nand {
+			spi0_pins: spi0-sck-nand-pins {
 				pinctrl-single,pins = <
 					0x1ec MODE_NITRO /* spi0_sck */
 					0x1f0 MODE_NITRO /* spi0_rxd */
@@ -290,7 +290,7 @@
 				>;
 			};
 
-			spi1_pins: pinmux_spi1_sck_nand {
+			spi1_pins: spi1-sck-nand-pins {
 				pinctrl-single,pins = <
 					0x1fc MODE_NITRO /* spi1_sck */
 					0x200 MODE_NITRO /* spi1_rxd */
@@ -299,14 +299,14 @@
 				>;
 			};
 
-			nuart_pins: pinmux_uart0_sin_nitro {
+			nuart_pins: uart0-sin-nitro-pins {
 				pinctrl-single,pins = <
 					0x20c MODE_NITRO /* nuart_rxd */
 					0x210 MODE_NITRO /* nuart_txd */
 				>;
 			};
 
-			uart0_pins: pinumux_uart0_sin_nand {
+			uart0_pins: uart0-sin-nand-pins {
 				pinctrl-single,pins = <
 					0x20c MODE_NAND /* uart0_sin */
 					0x210 MODE_NAND /* uart0_out */
@@ -319,7 +319,7 @@
 				>;
 			};
 
-			drdu2_pins: pinmux_drdu2_overcurrent {
+			drdu2_pins: drdu2-overcurrent-pins {
 				pinctrl-single,pins = <
 					0x22c MODE_NITRO /* drdu2_overcurrent */
 					0x230 MODE_NITRO /* drdu2_vbus_ppc */
@@ -328,7 +328,7 @@
 				>;
 			};
 
-			drdu3_pins: pinmux_drdu3_overcurrent {
+			drdu3_pins: drdu3-overcurrent-pins {
 				pinctrl-single,pins = <
 					0x23c MODE_NITRO /* drdu3_overcurrent */
 					0x240 MODE_NITRO /* drdu3_vbus_ppc */
@@ -337,7 +337,7 @@
 				>;
 			};
 
-			usb3h_pins: pinmux_usb3h_overcurrent {
+			usb3h_pins: usb3h-overcurrent-pins {
 				pinctrl-single,pins = <
 					0x24c MODE_NITRO /* usb3h_overcurrent */
 					0x250 MODE_NITRO /* usb3h_vbus_ppc */
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
index 5401a646c840..ac4f7b8f9273 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /*
  *Copyright(c) 2018 Broadcom
  */
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 8f8c25e51194..857fa427e195 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -108,18 +108,26 @@
 
 		CLUSTER0_L2: l2-cache@0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		CLUSTER1_L2: l2-cache@100 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		CLUSTER2_L2: l2-cache@200 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		CLUSTER3_L2: l2-cache@300 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -134,7 +142,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a72-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
@@ -174,7 +182,7 @@
 			      <0x02e00000 0x600000>; /* GICR */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
-			gic_its: gic-its@63c20000 {
+			gic_its: msi-controller@63c20000 {
 				compatible = "arm,gic-v3-its";
 				msi-controller;
 				#msi-cells = <1>;
@@ -182,7 +190,7 @@
 			};
 		};
 
-		smmu: mmu@3000000 {
+		smmu: iommu@3000000 {
 			compatible = "arm,mmu-500";
 			reg = <0x03000000 0x80000>;
 			#global-interrupts = <1>;
@@ -442,6 +450,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinmux 0 0 16>,
 					<&pinmux 16 71 2>,
@@ -471,7 +480,6 @@
 		};
 
 		uart0: serial@100000 {
-			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00100000 0x1000>;
 			reg-shift = <2>;
@@ -482,7 +490,6 @@
 		};
 
 		uart1: serial@110000 {
-			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00110000 0x1000>;
 			reg-shift = <2>;
@@ -493,7 +500,6 @@
 		};
 
 		uart2: serial@120000 {
-			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00120000 0x1000>;
 			reg-shift = <2>;
@@ -504,7 +510,6 @@
 		};
 
 		uart3: serial@130000 {
-			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00130000 0x1000>;
 			reg-shift = <2>;
@@ -561,7 +566,7 @@
 			iommus = <&smmu 0x6000 0x0000>;
 		};
 
-		enet: ethernet@340000{
+		enet: ethernet@340000 {
 			compatible = "brcm,amac";
 			reg = <0x00340000 0x1000>;
 			reg-names = "amac_base";
diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
index e0a71795261b..cc860a80af51 100644
--- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
+++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
@@ -361,24 +361,24 @@
 	};
 
 	pmu {
-		compatible = "cavium,thunder-pmu", "arm,armv8-pmuv3";
+		compatible = "cavium,thunder-pmu";
 		interrupts = <1 7 4>;
 	};
 
+	refclk50mhz: refclk50mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "refclk50mhz";
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
-		refclk50mhz: refclk50mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <50000000>;
-			clock-output-names = "refclk50mhz";
-		};
-
-		gic0: interrupt-controller@8010,00000000 {
+		gic0: interrupt-controller@801000000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
 			#address-cells = <2>;
@@ -389,14 +389,15 @@
 			      <0x8010 0x80000000 0x0 0x600000>; /* GICR */
 			interrupts = <1 9 0xf04>;
 
-			its: gic-its@8010,00020000 {
+			its: msi-controller@801000020000 {
 				compatible = "arm,gic-v3-its";
 				msi-controller;
+				#msi-cells = <1>;
 				reg = <0x8010 0x20000 0x0 0x200000>;
 			};
 		};
 
-		uaa0: serial@87e0,24000000 {
+		uaa0: serial@87e024000000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x87e0 0x24000000 0x0 0x1000>;
 			interrupts = <1 21 4>;
@@ -404,7 +405,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		uaa1: serial@87e0,25000000 {
+		uaa1: serial@87e025000000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x87e0 0x25000000 0x0 0x1000>;
 			interrupts = <1 22 4>;
diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dts b/arch/arm64/boot/dts/cavium/thunder2-99xx.dts
index d005e1e79c3d..89fc4107a0c4 100644
--- a/arch/arm64/boot/dts/cavium/thunder2-99xx.dts
+++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dts
@@ -14,7 +14,7 @@
 	model = "Cavium ThunderX2 CN99XX";
 	compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0x0 0x80000000>,  /* 2G @ 2G  */
 		      <0x00000008 0x80000000 0x0 0x80000000>;  /* 2G @ 34G */
diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
index dfb41705a9a9..966fb57280f3 100644
--- a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
+++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
@@ -55,7 +55,7 @@
 		method = "smc";
 	};
 
-	gic: interrupt-controller@400080000 {
+	gic: interrupt-controller@4000080000 {
 		compatible = "arm,gic-v3";
 		#interrupt-cells = <3>;
 		#address-cells = <2>;
@@ -67,7 +67,7 @@
 		      <0x04 0x01000000 0x0 0x1000000>;	/* GICR */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
-		gicits: gic-its@40010000 {
+		gicits: msi-controller@4000100000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			reg = <0x04 0x00100000 0x0 0x20000>;	/* GIC ITS */
@@ -83,7 +83,7 @@
 	};
 
 	pmu {
-		compatible = "brcm,vulcan-pmu", "arm,armv8-pmuv3";
+		compatible = "brcm,vulcan-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; /* PMU overflow */
 	};
 
@@ -103,7 +103,6 @@
 
 		/* ECAM at 0x3000_0000 - 0x4000_0000 */
 		reg = <0x0 0x30000000  0x0 0x10000000>;
-		reg-names = "PCI ECAM";
 
 		/*
 		 * PCI ranges:
@@ -137,8 +136,8 @@
 			reg = <0x04 0x02020000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk125mhz>;
-			clock-names = "apb_pclk";
+			clocks = <&clk125mhz>, <&clk125mhz>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/cix/Makefile b/arch/arm64/boot/dts/cix/Makefile
new file mode 100644
index 000000000000..ed3713982012
--- /dev/null
+++ b/arch/arm64/boot/dts/cix/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_CIX) += sky1-orion-o6.dtb
diff --git a/arch/arm64/boot/dts/cix/sky1-orion-o6.dts b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
new file mode 100644
index 000000000000..d74964d53c3b
--- /dev/null
+++ b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2025 Cix Technology Group Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "sky1.dtsi"
+/ {
+	model = "Radxa Orion O6";
+	compatible = "radxa,orion-o6", "cix,sky1";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x28000000>;
+			linux,cma-default;
+		};
+	};
+
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
new file mode 100644
index 000000000000..2fb2c99c0796
--- /dev/null
+++ b/arch/arm64/boot/dts/cix/sky1.dtsi
@@ -0,0 +1,430 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2025 Cix Technology Group Co., Ltd.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/cix,sky1.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a520";
+			enable-method = "psci";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <403>;
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a520";
+			enable-method = "psci";
+			reg = <0x0 0x100>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <403>;
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a520";
+			enable-method = "psci";
+			reg = <0x0 0x200>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <403>;
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a520";
+			enable-method = "psci";
+			reg = <0x0 0x300>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <403>;
+		};
+
+		cpu4: cpu@400 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0x400>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu5: cpu@500 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0x500>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu6: cpu@600 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0x600>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu7: cpu@700 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0x700>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu8: cpu@800 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0x800>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu9: cpu@900 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0x900>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu10: cpu@a00 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0xa00>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu11: cpu@b00 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0xb00>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+				core4 {
+					cpu = <&cpu4>;
+				};
+				core5 {
+					cpu = <&cpu5>;
+				};
+				core6 {
+					cpu = <&cpu6>;
+				};
+				core7 {
+					cpu = <&cpu7>;
+				};
+				core8 {
+					cpu = <&cpu8>;
+				};
+				core9 {
+					cpu = <&cpu9>;
+				};
+				core10 {
+					cpu = <&cpu10>;
+				};
+				core11 {
+					cpu = <&cpu11>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		ap_to_pm_scmi: scmi {
+			compatible = "arm,scmi";
+			mbox-names = "tx", "rx";
+			mboxes = <&mbox_ap2pm 8>, <&mbox_pm2ap 8>;
+			shmem = <&ap2pm_scmi_mem>, <&pm2ap_scmi_mem>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+
+	pmu-a520 {
+		compatible = "arm,cortex-a520-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition0>;
+	};
+
+	pmu-a720 {
+		compatible = "arm,cortex-a720-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0 0x20 0>;
+		dma-ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		i2c0: i2c@4010000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04010000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C0_APB>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@4020000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04020000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C1_APB>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@4030000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04030000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C2_APB>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@4040000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04040000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C3_APB>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@4050000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04050000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C4_APB>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@4060000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04060000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C5_APB>;
+			interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@4070000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04070000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C6_APB>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@4080000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04080000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C7_APB>;
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		uart0: serial@40b0000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0x040b0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_UART0_FUNC>, <&scmi_clk CLK_TREE_FCH_UART0_APB>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart1: serial@40c0000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0x040c0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_UART1_FUNC>, <&scmi_clk CLK_TREE_FCH_UART1_APB>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@40d0000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0x040d0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_UART2_FUNC>, <&scmi_clk CLK_TREE_FCH_UART2_APB>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart3: serial@40e0000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0x040e0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_UART3_FUNC>, <&scmi_clk CLK_TREE_FCH_UART3_APB>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		i3c0: i3c@40f0000 {
+			compatible = "cdns,i3c-master";
+			reg = <0x0 0x040f0000 0x0 0x10000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I3C0_APB>,
+				 <&scmi_clk CLK_TREE_FCH_I3C0_FUNC>;
+			clock-names = "pclk", "sysclk";
+			i3c-scl-hz = <400000>;
+			i2c-scl-hz = <100000>;
+			status = "disabled";
+		};
+
+		i3c1: i3c@4100000 {
+			compatible = "cdns,i3c-master";
+			reg = <0x0 0x04100000 0x0 0x10000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I3C1_APB>,
+				 <&scmi_clk CLK_TREE_FCH_I3C1_FUNC>;
+			clock-names = "pclk", "sysclk";
+			i3c-scl-hz = <400000>;
+			i2c-scl-hz = <100000>;
+			status = "disabled";
+		};
+
+		mbox_ap2se: mailbox@5060000 {
+			compatible = "cix,sky1-mbox";
+			reg = <0x0 0x05060000 0x0 0x10000>;
+			interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			cix,mbox-dir = "tx";
+		};
+
+		mbox_se2ap: mailbox@5070000 {
+			compatible = "cix,sky1-mbox";
+			reg = <0x0 0x05070000 0x0 0x10000>;
+			interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			cix,mbox-dir = "rx";
+		};
+
+		ap2pm_scmi_mem: shmem@6590000 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x06590000 0x0 0x80>;
+			reg-io-width = <4>;
+		};
+
+		mbox_ap2pm: mailbox@6590080 {
+			compatible = "cix,sky1-mbox";
+			reg = <0x0 0x06590080 0x0 0xff80>;
+			interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			cix,mbox-dir = "tx";
+		};
+
+		pm2ap_scmi_mem: shmem@65a0000 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x065a0000 0x0 0x80>;
+			reg-io-width = <4>;
+		};
+
+		mbox_pm2ap: mailbox@65a0080 {
+			compatible = "cix,sky1-mbox";
+			reg = <0x0 0x065a0080 0x0 0xff80>;
+			interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			cix,mbox-dir = "rx";
+		};
+
+		mbox_sfh2ap: mailbox@8090000 {
+			compatible = "cix,sky1-mbox";
+			reg = <0x0 0x08090000 0x0 0x10000>;
+			interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			cix,mbox-dir = "rx";
+		};
+
+		mbox_ap2sfh: mailbox@80a0000 {
+			compatible = "cix,sky1-mbox";
+			reg = <0x0 0x080a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			cix,mbox-dir = "tx";
+		};
+
+		gic: interrupt-controller@e010000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x0e010000 0 0x10000>,	/* GICD */
+			      <0x0 0x0e090000 0 0x300000>;       /* GICR * 12 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW 0>;
+			#interrupt-cells = <4>;
+			interrupt-controller;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@e050000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x0e050000 0x0 0x30000>;
+				msi-controller;
+				#msi-cells = <1>;
+			};
+
+			ppi-partitions {
+				ppi_partition0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+
+				ppi_partition1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5 &cpu6 &cpu7 &cpu8 &cpu9 &cpu10 &cpu11>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW 0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index 6e4ba69268e5..bcca63136557 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -1,8 +1,22 @@
 # SPDX-License-Identifier: GPL-2.0
+subdir-y += axis
+subdir-y += google
+
 dtb-$(CONFIG_ARCH_EXYNOS) += \
+	exynos2200-g0s.dtb		\
 	exynos5433-tm2.dtb		\
 	exynos5433-tm2e.dtb		\
 	exynos7-espresso.dtb		\
+	exynos7870-a2corelte.dtb	\
+	exynos7870-j6lte.dtb		\
+	exynos7870-on7xelte.dtb		\
 	exynos7885-jackpotlte.dtb	\
 	exynos850-e850-96.dtb		\
-	exynosautov9-sadk.dtb
+	exynos8895-dreamlte.dtb		\
+	exynos9810-starlte.dtb		\
+	exynos990-c1s.dtb		\
+	exynos990-r8s.dtb               \
+	exynos990-x1s.dtb		\
+	exynos990-x1slte.dtb		\
+	exynosautov9-sadk.dtb		\
+	exynosautov920-sadk.dtb
diff --git a/arch/arm64/boot/dts/exynos/axis/Makefile b/arch/arm64/boot/dts/exynos/axis/Makefile
new file mode 100644
index 000000000000..ccf00de64016
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_ARCH_ARTPEC) += \
+	artpec8-grizzly.dtb
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec-pinctrl.h b/arch/arm64/boot/dts/exynos/axis/artpec-pinctrl.h
new file mode 100644
index 000000000000..2c151aa98c96
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec-pinctrl.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Axis ARTPEC-8 SoC device tree pinctrl constants
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ *             https://www.samsung.com
+ * Copyright (c) 2025  Axis Communications AB.
+ *             https://www.axis.com
+ */
+
+#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_AXIS_ARTPEC_PINCTRL_H__
+#define __DTS_ARM64_SAMSUNG_EXYNOS_AXIS_ARTPEC_PINCTRL_H__
+
+#define ARTPEC_PIN_PULL_NONE		0
+#define ARTPEC_PIN_PULL_DOWN		1
+#define ARTPEC_PIN_PULL_UP		3
+
+#define ARTPEC_PIN_FUNC_INPUT		0
+#define ARTPEC_PIN_FUNC_OUTPUT		1
+#define ARTPEC_PIN_FUNC_2		2
+#define ARTPEC_PIN_FUNC_3		3
+#define ARTPEC_PIN_FUNC_4		4
+#define ARTPEC_PIN_FUNC_5		5
+#define ARTPEC_PIN_FUNC_6		6
+#define ARTPEC_PIN_FUNC_EINT		0xf
+#define ARTPEC_PIN_FUNC_F		ARTPEC_PIN_FUNC_EINT
+
+/* Drive strength for ARTPEC */
+#define ARTPEC_PIN_DRV_SR1		0x8
+#define ARTPEC_PIN_DRV_SR2		0x9
+#define ARTPEC_PIN_DRV_SR3		0xa
+#define ARTPEC_PIN_DRV_SR4		0xb
+#define ARTPEC_PIN_DRV_SR5		0xc
+#define ARTPEC_PIN_DRV_SR6		0xd
+
+#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_AXIS_ARTPEC_PINCTRL_H__ */
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec8-grizzly.dts b/arch/arm64/boot/dts/exynos/axis/artpec8-grizzly.dts
new file mode 100644
index 000000000000..5ae864ec3193
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec8-grizzly.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Axis ARTPEC-8 Grizzly board device tree source
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ *             https://www.samsung.com
+ * Copyright (c) 2025  Axis Communications AB.
+ *             https://www.axis.com
+ */
+
+/dts-v1/;
+#include "artpec8.dtsi"
+#include "artpec8-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	model = "ARTPEC-8 grizzly board";
+	compatible = "axis,artpec8-grizzly", "axis,artpec8";
+
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+};
+
+&osc_clk {
+	clock-frequency = <50000000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec8-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/axis/artpec8-pinctrl.dtsi
new file mode 100644
index 000000000000..8d239a70f1b4
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec8-pinctrl.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Axis ARTPEC-8 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ *             https://www.samsung.com
+ * Copyright (c) 2025  Axis Communications AB.
+ *             https://www.axis.com
+ */
+
+#include "artpec-pinctrl.h"
+
+&pinctrl_fsys {
+	gpe0: gpe0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe2: gpe2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps0: gps0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps1: gps1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	serial0_bus: serial0-bus-pins {
+		samsung,pins = "gpf4-4", "gpf4-5";
+		samsung,pin-function = <ARTPEC_PIN_FUNC_2>;
+		samsung,pin-pud = <ARTPEC_PIN_PULL_UP>;
+		samsung,pin-drv = <ARTPEC_PIN_DRV_SR3>;
+	};
+};
+
+&pinctrl_peric {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec8.dtsi b/arch/arm64/boot/dts/exynos/axis/artpec8.dtsi
new file mode 100644
index 000000000000..db9833297982
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec8.dtsi
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Axis ARTPEC-8 SoC device tree source
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ *             https://www.samsung.com
+ * Copyright (c) 2025  Axis Communications AB.
+ *             https://www.axis.com
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axis,artpec8-clk.h>
+
+/ {
+	compatible = "axis,artpec8";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		pinctrl0 = &pinctrl_fsys;
+		pinctrl1 = &pinctrl_peric;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&cpu_sleep>;
+			clocks = <&cmu_cpucl CLK_GOUT_CPUCL_CLUSTER_CPU>;
+			clock-names = "cpu";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&cpu_sleep>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&cpu_sleep>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&cpu_sleep>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_sleep: cpu-sleep {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2000>;
+			};
+		};
+	};
+
+	fin_pll: clock-finpll {
+		compatible = "fixed-factor-clock";
+		clocks = <&osc_clk>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "fin_pll";
+	};
+
+	osc_clk: clock-osc {
+		/* XXTI */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "osc_clk";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x17000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cmu_imem: clock-controller@10010000 {
+			compatible = "axis,artpec8-cmu-imem";
+			reg = <0x10010000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_IMEM_ACLK>,
+				 <&cmu_cmu CLK_DOUT_CMU_IMEM_JPEG>;
+			clock-names = "fin_pll", "aclk", "jpeg";
+		};
+
+		timer@10040000 {
+			compatible = "axis,artpec8-mct", "samsung,exynos4210-mct";
+			reg = <0x10040000 0x1000>;
+			clocks = <&fin_pll>, <&cmu_imem CLK_GOUT_IMEM_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gic: interrupt-controller@10201000 {
+			compatible = "arm,gic-400";
+			reg = <0x10201000 0x1000>,
+			      <0x10202000 0x2000>,
+			      <0x10204000 0x2000>,
+			      <0x10206000 0x2000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		cmu_cpucl: clock-controller@11410000 {
+			compatible = "axis,artpec8-cmu-cpucl";
+			reg = <0x11410000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_CPUCL_SWITCH>;
+			clock-names = "fin_pll", "switch";
+		};
+
+		cmu_cmu: clock-controller@12400000 {
+			compatible = "axis,artpec8-cmu-cmu";
+			reg = <0x12400000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
+		};
+
+		cmu_core: clock-controller@12410000 {
+			compatible = "axis,artpec8-cmu-core";
+			reg = <0x12410000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_CORE_MAIN>,
+				 <&cmu_cmu CLK_DOUT_CMU_CORE_DLP>;
+			clock-names = "fin_pll", "main", "dlp";
+		};
+
+		cmu_bus: clock-controller@12c10000 {
+			compatible = "axis,artpec8-cmu-bus";
+			reg = <0x12c10000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_BUS>,
+				 <&cmu_cmu CLK_DOUT_CMU_BUS_DLP>;
+			clock-names = "fin_pll", "bus", "dlp";
+		};
+
+		cmu_peri: clock-controller@16410000 {
+			compatible = "axis,artpec8-cmu-peri";
+			reg = <0x16410000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_PERI_IP>,
+				 <&cmu_cmu CLK_DOUT_CMU_PERI_AUDIO>,
+				 <&cmu_cmu CLK_DOUT_CMU_PERI_DISP>;
+			clock-names = "fin_pll", "ip", "audio", "disp";
+		};
+
+		pinctrl_peric: pinctrl@165f0000 {
+			compatible = "axis,artpec8-pinctrl";
+			reg = <0x165f0000 0x1000>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_fsys: clock-controller@16c10000 {
+			compatible = "axis,artpec8-cmu-fsys";
+			reg = <0x16c10000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_FSYS_SCAN0>,
+				 <&cmu_cmu CLK_DOUT_CMU_FSYS_SCAN1>,
+				 <&cmu_cmu CLK_DOUT_CMU_FSYS_BUS>,
+				 <&cmu_cmu CLK_DOUT_CMU_FSYS_IP>;
+			clock-names = "fin_pll", "scan0", "scan1", "bus", "ip";
+		};
+
+		pinctrl_fsys: pinctrl@16c30000 {
+			compatible = "axis,artpec8-pinctrl";
+			reg = <0x16c30000 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serial_0: serial@16cc0000 {
+			compatible = "axis,artpec8-uart";
+			reg = <0x16cc0000 0x100>;
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_UART0_PCLK>,
+				 <&cmu_fsys CLK_GOUT_FSYS_UART0_SCLK_UART>;
+			clock-names = "uart", "clk_uart_baud0";
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&serial0_bus>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos2200-g0s.dts b/arch/arm64/boot/dts/exynos/exynos2200-g0s.dts
new file mode 100644
index 000000000000..0e348c5cf7df
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos2200-g0s.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S22+ (g0s/SM-S906B) device tree source
+ *
+ * Copyright (c) 2025, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+/dts-v1/;
+#include "exynos2200.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy S22+ (SM-S906B)";
+	compatible = "samsung,g0s", "samsung,exynos2200";
+	chassis-type = "handset";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer {
+			compatible = "simple-framebuffer";
+			memory-region = <&cont_splash_mem>;
+			width = <1080>;
+			height = <2340>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	/*
+	 * RTC clock (XrtcXTI); external, must be 32.768 kHz.
+	 *
+	 * TODO: Remove this once RTC clock is implemented properly as part of
+	 *       PMIC driver.
+	 */
+	rtcclk: clock-rtcclk {
+		compatible = "fixed-clock";
+		clock-output-names = "rtcclk";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_volup>;
+		pinctrl-names = "default";
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa3 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>,
+		      <0x8 0x80000000 0x1 0x7e000000>;
+	};
+
+	/* TODO: Remove this once PMIC is implemented  */
+	reg_dummy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy_reg";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cont_splash_mem: framebuffer@f6200000 {
+			reg = <0x0 0xf6200000 0x0 (1080 * 2340 * 4)>;
+			no-map;
+		};
+
+		debug_kinfo_reserved: debug-kinfo-reserved@fcfff000 {
+			reg = <0x0 0xfcfff000 0x0 0x1000>;
+			no-map;
+		};
+
+		log_itmon: log-itmon@fffe0000 {
+			reg = <0x0 0xfffe0000 0x0 0x20000>;
+			no-map;
+		};
+	};
+};
+
+&cmu_hsi0 {
+	clocks = <&xtcxo>,
+		 <&rtcclk>,
+		 <&cmu_top CLK_DOUT_CMU_HSI0_NOC>,
+		 <&cmu_top CLK_DOUT_CMU_HSI0_DPGTC>,
+		 <&cmu_top CLK_DOUT_CMU_HSI0_DPOSC>,
+		 <&cmu_top CLK_DOUT_CMU_HSI0_USB32DRD>;
+	clock-names = "oscclk", "rtcclk", "noc", "dpgtc", "dposc", "usb";
+};
+
+/*
+ * cpu2 and cpu3 fail to come up consistently, which leads to a hang later
+ * in the boot process. Disable them until the issue is figured out.
+ */
+&cpu2 {
+	status = "fail";
+};
+
+&cpu3 {
+	status = "fail";
+};
+
+&ext_26m {
+	clock-frequency = <26000000>;
+};
+
+&ext_200m {
+	clock-frequency = <200000000>;
+};
+
+&mct_peris {
+	status = "okay";
+};
+
+&pinctrl_alive {
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+};
+
+&ppi_cluster0 {
+	affinity = <&cpu0 &cpu1>;
+};
+
+&usb {
+	/* TODO: Replace these once PMIC is implemented  */
+	vdd10-supply = <&reg_dummy>;
+	vdd33-supply = <&reg_dummy>;
+	status = "okay";
+};
+
+&usb32drd {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	maximum-speed = "high-speed";
+};
+
+&usb_hsphy {
+	/* TODO: Replace these once PMIC is implemented  */
+	vdda12-supply = <&reg_dummy>;
+	vdd-supply = <&reg_dummy>;
+	status = "okay";
+};
+
+&xtcxo {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi
new file mode 100644
index 000000000000..5877da7baf5c
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi
@@ -0,0 +1,1765 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung's Exynos 2200 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2025, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpq1: gpq1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpq2: gpq2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	bt_hostwake: bt-hostwake-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpq0-3", "gpq0-2", "gpq0-1", "gpq0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	wlan_host_wake: wlan-host-wake-pins {
+		samsung,pins = "gpa0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_cmgp {
+	gpm0: gpm0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm1: gpm1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm2: gpm2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm3: gpm3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm4: gpm4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm5: gpm5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm6: gpm6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm7: gpm7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm8: gpm8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm9: gpm9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm10: gpm10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm11: gpm11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm12: gpm12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm13: gpm13-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm14: gpm14-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm15: gpm15-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm16: gpm16-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm17: gpm17-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm20: gpm20-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm21: gpm21-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm22: gpm22-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm23: gpm23-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm24: gpm24-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	hsi2c24_bus: hsi2c24-bus-pins {
+		samsung,pins = "gpm0-0", "gpm0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c25_bus: hsi2c25-bus-pins {
+		samsung,pins = "gpm1-0", "gpm1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c26_bus: hsi2c26-bus-pins {
+		samsung,pins = "gpm2-0", "gpm2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c27_bus: hsi2c27-bus-pins {
+		samsung,pins = "gpm3-0", "gpm3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c28_bus: hsi2c28-bus-pins {
+		samsung,pins = "gpm4-0", "gpm4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c29_bus: hsi2c29-bus-pins {
+		samsung,pins = "gpm5-0", "gpm5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c30_bus: hsi2c30-bus-pins {
+		samsung,pins = "gpm6-0", "gpm6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c31_bus: hsi2c31-bus-pins {
+		samsung,pins = "gpm7-0", "gpm7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c32_bus: hsi2c32-bus-pins {
+		samsung,pins = "gpm8-0", "gpm8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c33_bus: hsi2c33-bus-pins {
+		samsung,pins = "gpm9-0", "gpm9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c34_bus: hsi2c34-bus-pins {
+		samsung,pins = "gpm10-0", "gpm10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c35_bus: hsi2c35-bus-pins {
+		samsung,pins = "gpm11-0", "gpm11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c36_bus: hsi2c36-bus-pins {
+		samsung,pins = "gpm12-0", "gpm12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c37_bus: hsi2c37-bus-pins {
+		samsung,pins = "gpm13-0", "gpm13-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c38_bus: hsi2c38-bus-pins {
+		samsung,pins = "gpm23-0", "gpm24-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpm0-0", "gpm0-1", "gpm1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpm1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpm1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpm2-0", "gpm2-1", "gpm3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpm3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpm3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpm4-0", "gpm4-1", "gpm5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpm5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpm5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpm6-0", "gpm6-1", "gpm7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpm7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi15_cs_func: spi15-cs-func-pins {
+		samsung,pins = "gpm7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi16_bus: spi16-bus-pins {
+		samsung,pins = "gpm8-0", "gpm8-1", "gpm9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi16_cs: spi16-cs-pins {
+		samsung,pins = "gpm9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi16_cs_func: spi16-cs-func-pins {
+		samsung,pins = "gpm9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi17_bus: spi17-bus-pins {
+		samsung,pins = "gpm10-0", "gpm10-1", "gpm11-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi17_cs: spi17-cs-pins {
+		samsung,pins = "gpm11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi17_cs_func: spi17-cs-func-pins {
+		samsung,pins = "gpm11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi18_bus: spi18-bus-pins {
+		samsung,pins = "gpm12-0", "gpm12-1", "gpm13-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi18_cs: spi18-cs-pins {
+		samsung,pins = "gpm13-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi18_cs_func: spi18-cs-func-pins {
+		samsung,pins = "gpm13-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart14_bus_single: uart14-bus-single-pins {
+		samsung,pins = "gpm0-0", "gpm0-1", "gpm2-0", "gpm2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_dual: uart14-bus-dual-pins {
+		samsung,pins = "gpm0-0", "gpm0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_single: uart15-bus-single-pins {
+		samsung,pins = "gpm3-0", "gpm3-1", "gpm4-0", "gpm4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_dual: uart15-bus-dual-pins {
+		samsung,pins = "gpm3-0", "gpm3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart16_bus_single: uart16-bus-single-pins {
+		samsung,pins = "gpm5-0", "gpm5-1", "gpm6-0", "gpm6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart16_bus_dual: uart16-bus-dual-pins {
+		samsung,pins = "gpm5-0", "gpm5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart17_bus_single: uart17-bus-single-pins {
+		samsung,pins = "gpm7-0", "gpm7-1", "gpm8-0", "gpm8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart17_bus_dual: uart17-bus-dual-pins {
+		samsung,pins = "gpm7-0", "gpm7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart18_bus_single: uart18-bus-single-pins {
+		samsung,pins = "gpm8-0", "gpm8-1", "gpm9-0", "gpm9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart18_bus_dual: uart18-bus-dual-pins {
+		samsung,pins = "gpm8-0", "gpm8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart19_bus_single: uart19-bus-single-pins {
+		samsung,pins = "gpm10-0", "gpm10-1", "gpm11-0", "gpm11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart19_bus_dual: uart19-bus-dual-pins {
+		samsung,pins = "gpm12-0", "gpm12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart20_bus_single: uart20-bus-single-pins {
+		samsung,pins = "gpm13-0", "gpm13-1", "gpm14-0", "gpm14-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart20_bus_dual: uart20-bus-dual-pins {
+		samsung,pins = "gpm13-0", "gpm13-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+};
+
+&pinctrl_hsi1 {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcie0_clkreq: pcie0-clkreq-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie0_perst: pcie0-perst-pins {
+		samsung,pins = "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie1_clkreq: pcie1-clkreq-pins {
+		samsung,pins = "gpf0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie1_perst: pcie1-perst-pins {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_hsi1ufs {
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gpf2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gpf2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	aud_i2s0_bus: aud-i2s0-bus-pins {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s1_bus: aud-i2s1-bus-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s2_bus: aud-i2s2-bus-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s3_bus: aud-i2s3-bus-pins {
+		samsung,pins = "gpb3-0", "gpb3-1", "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s3_pci: aud-i2s3-pci-pins {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_dsd_bus: aud-dsd-bus-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	decon_0_te: decon-0-te-pins {
+		samsung,pins = "gpg2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+	};
+
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c0_bus: i3c0-bus-pins {
+		samsung,pins = "gpc0-0", "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c1_bus: i3c1-bus-pins {
+		samsung,pins = "gpc1-0", "gpc1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c2_bus: i3c2-bus-pins {
+		samsung,pins = "gpc2-0", "gpc2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-1", "gpp4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart6_bus_single: uart6-bus-single-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_dual: uart6-bus-dual-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp10: gpp10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c15_bus: hsi2c15-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c16_bus: hsi2c16-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c17_bus: hsi2c17-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c18_bus: hsi2c18-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c19_bus: hsi2c19-bus-pins {
+		samsung,pins = "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c20_bus: hsi2c20-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c21_bus: hsi2c21-bus-pins {
+		samsung,pins = "gpp10-2", "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-1", "gpp8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp9-2", "gpp9-1", "gpp9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp10-2", "gpp10-1", "gpp10-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart9_bus_single: uart9-bus-single-pins {
+		samsung,pins = "gpp7-3", "gpp7-2", "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_dual: uart9-bus-dual-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_single: uart10-bus-single-pins {
+		samsung,pins = "gpp8-3", "gpp8-2", "gpp8-1", "gpp8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_dual: uart10-bus-dual-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_single: uart11-bus-single-pins {
+		samsung,pins = "gpp9-3", "gpp9-2", "gpp9-1", "gpp9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_dual: uart11-bus-dual-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_single: uart12-bus-single-pins {
+		samsung,pins = "gpp10-3", "gpp10-2", "gpp10-1", "gpp10-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_dual: uart12-bus-dual-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+};
+
+&pinctrl_peric2 {
+	gpc3: gpc3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc4: gpc4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc5: gpc5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc6: gpc6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc7: gpc7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc8: gpc8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc9: gpc9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp11: gpp11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c13_bus: hsi2c13-bus-pins {
+		samsung,pins = "gpp6-2", "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c22_bus: hsi2c22-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c3_bus: i3c3-bus-pins {
+		samsung,pins = "gpc3-0", "gpc3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c4_bus: i3c4-bus-pins {
+		samsung,pins = "gpc4-0", "gpc4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c5_bus: i3c5-bus-pins {
+		samsung,pins = "gpc5-0", "gpc5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c6_bus: i3c6-bus-pins {
+		samsung,pins = "gpc6-0", "gpc6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c7_bus: i3c7-bus-pins {
+		samsung,pins = "gpc7-0", "gpc7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c8_bus: i3c8-bus-pins {
+		samsung,pins = "gpc8-0", "gpc8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c9_bus: i3c9-bus-pins {
+		samsung,pins = "gpc9-0", "gpc9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c10_bus: i3c10-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c11_bus: i3c11-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c23_bus: hsi2c23-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-1", "gpp0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-1", "gpp1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-1", "gpp2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-1", "gpp3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-1", "gpp5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi5_cs: spi5-cs-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp6-2", "gpp6-1", "gpp6-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-1", "gpp11-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart0_bus_single: uart0-bus-single-pins {
+		samsung,pins = "gpg0-2", "gpg0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	uart2_bus_single: uart2-bus-single-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_dual: uart2-bus-dual-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_single: uart3-bus-single-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_single: uart4-bus-single-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_single: uart5-bus-single-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_single: uart7-bus-single-pins {
+		samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_dual: uart7-bus-dual-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_single: uart8-bus-single-pins {
+		samsung,pins = "gpp6-3", "gpp6-2", "gpp6-1", "gpp6-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_dual: uart8-bus-dual-pins {
+		samsung,pins = "gpp6-0", "gpp6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_single: uart13-bus-single-pins {
+		samsung,pins = "gpp11-3", "gpp11-2", "gpp11-1", "gpp11-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_dual: uart13-bus-dual-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_ufs {
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_vts {
+	gpv0: gpv0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	amic_pdm0_bus: amic-pdm0-bus-pins {
+		samsung,pins = "gpv0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	amic_pdm1_bus: amic-pdm1-bus-pins {
+		samsung,pins = "gpv0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	amic_pdm2_bus: amic-pdm2-bus-pins {
+		samsung,pins = "gpv0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk0: dmic-bus-clk0-pins {
+		samsung,pins = "gpv0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk1: dmic-bus-clk1-pins {
+		samsung,pins = "gpv0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk2: dmic-bus-clk2-pins {
+		samsung,pins = "gpv0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm0_bus: dmic-pdm0-bus-pins {
+		samsung,pins = "gpv0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm1_bus: dmic-pdm1-bus-pins {
+		samsung,pins = "gpv0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm2_bus: dmic-pdm2-bus-pins {
+		samsung,pins = "gpv0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos2200.dtsi b/arch/arm64/boot/dts/exynos/exynos2200.dtsi
new file mode 100644
index 000000000000..6487ccb58ae7
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos2200.dtsi
@@ -0,0 +1,1923 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung's Exynos 2200 SoC device tree source
+ *
+ * Copyright (c) 2025, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+#include <dt-bindings/clock/samsung,exynos2200-cmu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "samsung,exynos2200";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_cmgp;
+		pinctrl2 = &pinctrl_hsi1;
+		pinctrl3 = &pinctrl_ufs;
+		pinctrl4 = &pinctrl_hsi1ufs;
+		pinctrl5 = &pinctrl_peric0;
+		pinctrl6 = &pinctrl_peric1;
+		pinctrl7 = &pinctrl_peric2;
+		pinctrl8 = &pinctrl_vts;
+	};
+
+	xtcxo: clock-1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	ext_26m: clock-2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "ext-26m";
+	};
+
+	ext_200m: clock-3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "ext-200m";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0>;
+			capacity-dmips-mhz = <260>;
+			dynamic-power-coefficient = <189>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x100>;
+			capacity-dmips-mhz = <260>;
+			dynamic-power-coefficient = <189>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x200>;
+			capacity-dmips-mhz = <260>;
+			dynamic-power-coefficient = <189>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x300>;
+			capacity-dmips-mhz = <260>;
+			dynamic-power-coefficient = <189>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a710";
+			reg = <0x400>;
+			capacity-dmips-mhz = <380>;
+			dynamic-power-coefficient = <560>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a710";
+			reg = <0x500>;
+			capacity-dmips-mhz = <380>;
+			dynamic-power-coefficient = <560>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a710";
+			reg = <0x600>;
+			capacity-dmips-mhz = <380>;
+			dynamic-power-coefficient = <560>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x2";
+			reg = <0x700>;
+			capacity-dmips-mhz = <488>;
+			dynamic-power-coefficient = <765>;
+			enable-method = "psci";
+			cpu-idle-states = <&prime_cpu_sleep>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			little_cpu_sleep: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "c2";
+				entry-latency-us = <70>;
+				exit-latency-us = <170>;
+				min-residency-us = <2000>;
+				arm,psci-suspend-param = <0x10000>;
+			};
+
+			big_cpu_sleep: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "c2";
+				entry-latency-us = <235>;
+				exit-latency-us = <220>;
+				min-residency-us = <3500>;
+				arm,psci-suspend-param = <0x10000>;
+			};
+
+			prime_cpu_sleep: cpu-sleep-2 {
+				compatible = "arm,idle-state";
+				idle-state-name = "c2";
+				entry-latency-us = <150>;
+				exit-latency-us = <190>;
+				min-residency-us = <2500>;
+				arm,psci-suspend-param = <0x10000>;
+			};
+		};
+	};
+
+	pmu-a510 {
+		compatible = "arm,cortex-a510-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-a710 {
+		compatible = "arm,cortex-a710-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	pmu-x2 {
+		compatible = "arm,cortex-x2-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos2200-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		cmu_peris: clock-controller@10020000 {
+			compatible = "samsung,exynos2200-cmu-peris";
+			reg = <0x10020000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&cmu_top CLK_DOUT_TCXO_DIV3>,
+				 <&cmu_top CLK_DOUT_CMU_PERIS_NOC>,
+				 <&cmu_top CLK_DOUT_CMU_PERIS_GIC>;
+			clock-names = "tcxo_div3",
+				      "noc",
+				      "gic";
+		};
+
+		mct_peris: timer@10040000 {
+			compatible = "samsung,exynos2200-mct-peris",
+				     "samsung,exynos4210-mct";
+			reg = <0x10040000 0x800>;
+			clocks = <&cmu_top CLK_DOUT_TCXO_DIV3>, <&cmu_peris CLK_MOUT_PERIS_GIC>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <GIC_SPI 943 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 944 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 945 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 947 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 948 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 949 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 954 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@10200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x10200000 0x10000>,     /* GICD */
+			      <0x10240000 0x200000>;    /* GICR * 8 */
+
+			#address-cells = <0>;
+			#interrupt-cells = <4>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5 &cpu6>;
+				};
+
+				ppi_cluster2: interrupt-partition-2 {
+					affinity = <&cpu7>;
+				};
+			};
+		};
+
+		cmu_peric0: clock-controller@10400000 {
+			compatible = "samsung,exynos2200-cmu-peric0";
+			reg = <0x10400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_NOC>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_IP0>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_IP1>;
+			clock-names = "oscclk", "noc", "ip0", "ip1";
+		};
+
+		syscon_peric0: syscon@10420000 {
+			compatible = "samsung,exynos2200-peric0-sysreg", "syscon";
+			reg = <0x10420000 0x10000>;
+		};
+
+		pinctrl_peric0: pinctrl@10430000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x10430000 0x1000>;
+		};
+
+		usi4: usi@105000c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x105000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI04>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric0 0x1024>;
+			status = "disabled";
+
+			hsi2c_8: i2c@10500000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10500000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_DOUT_PERIC0_USI04>,
+					 <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c8_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_6: serial@10500000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10500000 0xc0>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI04>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart6_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi4_i2c: usi@105100c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x105100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric0 0x1024>;
+			status = "disabled";
+
+			hsi2c_9: i2c@10510000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10510000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_DOUT_PERIC0_I2C>,
+					 <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c9_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		cmu_peric1: clock-controller@10700000 {
+			compatible = "samsung,exynos2200-cmu-peric1";
+			reg = <0x10700000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_NOC>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_IP0>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_IP1>;
+			clock-names = "oscclk", "noc", "ip0", "ip1";
+		};
+
+		syscon_peric1: syscon@10720000 {
+			compatible = "samsung,exynos2200-peric1-sysreg", "syscon";
+			reg = <0x10720000 0x10000>;
+		};
+
+		pinctrl_peric1: pinctrl@10730000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x10730000 0x1000>;
+		};
+
+		usi7: usi@109000c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI07>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric1 0x2030>;
+			status = "disabled";
+
+			hsi2c_14: i2c@10900000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10900000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI07>,
+					 <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c14_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_9: serial@10900000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10900000 0xc0>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI07>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart9_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi7_i2c: usi@109100c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI07_SPI_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric1 0x2034>;
+			status = "disabled";
+
+			hsi2c_15: i2c@10910000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10910000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI07_SPI_I2C>,
+					 <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c15_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi8: usi@109200c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI08>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric1 0x2038>;
+			status = "disabled";
+
+			hsi2c_16: i2c@10920000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10920000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI08>,
+					 <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c16_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_10: serial@10920000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10920000 0xc0>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI08>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart10_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi8_i2c: usi@109300c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI08_SPI_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric1 0x203c>;
+			status = "disabled";
+
+			hsi2c_17: i2c@10930000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10930000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI08_SPI_I2C>,
+					 <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c17_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi9: usi@109400c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI09>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric1 0x2040>;
+			status = "disabled";
+
+			hsi2c_18: i2c@10940000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10940000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI09>,
+					 <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c18_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_11: serial@10940000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10940000 0xc0>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI09>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart11_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi9_i2c: usi@109500c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric1 0x2044>;
+			status = "disabled";
+
+			hsi2c_19: i2c@10950000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10950000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_I2C>,
+					 <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c19_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi10: usi@109600c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI10>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric1 0x2048>;
+			status = "disabled";
+
+			hsi2c_20: i2c@10960000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10960000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI10>,
+					 <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c20_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_12: serial@10960000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10960000 0xc0>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI10>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart12_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi10_i2c: usi@109700c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109700c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric1 0x204c>;
+			status = "disabled";
+
+			hsi2c_21: i2c@10970000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10970000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_I2C>,
+					 <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c21_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+		};
+
+		cmu_hsi0: clock-controller@10a00000 {
+			compatible = "samsung,exynos2200-cmu-hsi0";
+			reg = <0x10a00000 0x8000>;
+			#clock-cells = <1>;
+		};
+
+		usb32drd: phy@10aa0000 {
+			compatible = "samsung,exynos2200-usb32drd-phy";
+			reg = <0x10aa0000 0x10000>;
+
+			clocks = <&cmu_hsi0 CLK_MOUT_HSI0_NOC>;
+			clock-names = "phy";
+
+			#phy-cells = <1>;
+			phys = <&usb_hsphy>;
+			phy-names = "hs";
+
+			samsung,pmu-syscon = <&pmu_system_controller>;
+
+			status = "disabled";
+		};
+
+		usb_hsphy: phy@10ab0000 {
+			compatible = "samsung,exynos2200-eusb2-phy";
+			reg = <0x10ab0000 0x10000>;
+
+			clocks = <&cmu_hsi0 CLK_MOUT_HSI0_USB32DRD>,
+				 <&cmu_hsi0 CLK_MOUT_HSI0_NOC>,
+				 <&cmu_hsi0 CLK_DOUT_DIV_CLK_HSI0_EUSB>;
+			clock-names = "ref", "bus", "ctrl";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb: usb@10b00000 {
+			compatible = "samsung,exynos2200-dwusb3";
+			ranges = <0x0 0x10b00000 0x10000>;
+
+			clocks = <&cmu_hsi0 CLK_MOUT_HSI0_NOC>;
+			clock-names = "link_aclk";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			status = "disabled";
+
+			usb_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+
+				clocks = <&cmu_hsi0 CLK_MOUT_HSI0_USB32DRD>;
+				clock-names = "ref";
+
+				interrupts = <GIC_SPI 485 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				phys = <&usb32drd 0>;
+				phy-names = "usb2-phy";
+
+				snps,dis-u2-freeclk-exists-quirk;
+				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,has-lpm-erratum;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,usb3_lpm_capable;
+			};
+		};
+
+		cmu_ufs: clock-controller@11000000 {
+			compatible = "samsung,exynos2200-cmu-ufs";
+			reg = <0x11000000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top CLK_DOUT_CMU_UFS_NOC>,
+				 <&cmu_top CLK_MOUT_CMU_UFS_MMC_CARD>,
+				 <&cmu_top CLK_DOUT_CMU_UFS_UFS_EMBD>;
+			clock-names = "oscclk", "noc", "mmc", "ufs";
+		};
+
+		syscon_ufs: syscon@11020000 {
+			compatible = "samsung,exynos2200-ufs-sysreg", "syscon";
+			reg = <0x11020000 0x10000>;
+		};
+
+		pinctrl_ufs: pinctrl@11040000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x11040000 0x1000>;
+		};
+
+		pinctrl_hsi1ufs: pinctrl@11060000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x11060000 0x1000>;
+		};
+
+		pinctrl_hsi1: pinctrl@11240000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x11240000 0x1000>;
+		};
+
+		cmu_peric2: clock-controller@11c00000 {
+			compatible = "samsung,exynos2200-cmu-peric2";
+			reg = <0x11c00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC2_NOC>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC2_IP0>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC2_IP1>;
+			clock-names = "oscclk", "noc", "ip0", "ip1";
+		};
+
+		syscon_peric2: syscon@11c20000 {
+			compatible = "samsung,exynos2200-peric2-sysreg", "syscon";
+			reg = <0x11c20000 0x10000>;
+		};
+
+		pinctrl_peric2: pinctrl@11c30000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x11c30000 0x1000>;
+		};
+
+		usi0: usi@11d000c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI00>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x2000>;
+			status = "disabled";
+
+			hsi2c_0: i2c@11d00000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d00000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI00>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c0_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_2: serial@11d00000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11d00000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI00>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart2_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi0_i2c: usi@11d100c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI00_SPI_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x2004>;
+			status = "disabled";
+
+			hsi2c_1: i2c@11d10000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d10000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI00_SPI_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 703 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c1_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi1: usi@11d200c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI01>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x2008>;
+			status = "disabled";
+
+			hsi2c_2: i2c@11d20000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d20000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI01>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c2_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_3: serial@11d20000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11d20000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI01>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart3_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi1_i2c: usi@11d300c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI01_SPI_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x200c>;
+			status = "disabled";
+
+			hsi2c_3: i2c@11d30000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d30000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI01_SPI_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 705 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c3_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi2: usi@11d400c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI02>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x2010>;
+			status = "disabled";
+
+			hsi2c_4: i2c@11d40000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d40000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI02>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c4_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_4: serial@11d40000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11d40000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI02>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart4_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi2_i2c: usi@11d500c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x2014>;
+			status = "disabled";
+
+			hsi2c_5: i2c@11d50000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d50000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c5_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi3: usi@11d600c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI03>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x2018>;
+			status = "disabled";
+
+			hsi2c_6: i2c@11d60000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d60000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI03>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c6_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_5: serial@11d60000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11d60000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI03>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart5_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi3_i2c: usi@11d700c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d700c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x201c>;
+			status = "disabled";
+
+			hsi2c_7: i2c@11d70000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d70000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c7_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi5_i2c: usi@11d800c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d800c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x102c>;
+			status = "disabled";
+
+			hsi2c_11: i2c@11d80000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d80000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c11_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi6_i2c: usi@11d900c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d900c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x1004>;
+			status = "disabled";
+
+			hsi2c_13: i2c@11d90000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d90000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c13_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi11: usi@11da00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11da00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI11>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x1058>;
+			status = "disabled";
+
+			hsi2c_22: i2c@11da0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11da0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI11>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c22_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_13: serial@11da0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11da0000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI11>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart13_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi11_i2c: usi@11db00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11db00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x105c>;
+			status = "disabled";
+
+			hsi2c_23: i2c@11db0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11db0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c23_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi5: usi@11dd00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11dd00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI05>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x117c>;
+			status = "disabled";
+
+			hsi2c_10: i2c@11dd0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11dd0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI05>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c10_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_7: serial@11dd0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11dd0000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI05>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart7_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi6: usi@11de00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11de00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI06>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x1180>;
+			status = "disabled";
+
+			hsi2c_12: i2c@11de0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11de0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI06>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c12_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_8: serial@11de0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11de0000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI06>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart8_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		cmu_cmgp: clock-controller@14e00000 {
+			compatible = "samsung,exynos2200-cmu-cmgp";
+			reg = <0x14e00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_alive CLK_DOUT_ALIVE_CMGP_NOC>,
+				 <&cmu_alive CLK_DOUT_ALIVE_CMGP_PERI>;
+			clock-names = "oscclk", "noc", "peri";
+		};
+
+		syscon_cmgp: syscon@14e20000 {
+			compatible = "samsung,exynos2200-cmgp-sysreg", "syscon";
+			reg = <0x14e20000 0x10000>;
+		};
+
+		pinctrl_cmgp: pinctrl@14e30000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x14e30000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos2200-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		usi_cmgp0: usi@14f000c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI0>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2000>;
+			status = "disabled";
+
+			hsi2c_24: i2c@14f00000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f00000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI0>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c24_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_14: serial@14f00000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f00000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI0>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart14_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp0: usi@14f100c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C0>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2070>;
+			status = "disabled";
+
+			hsi2c_25: i2c@14f10000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f10000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C0>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c25_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp1: usi@14f200c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI1>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2010>;
+			status = "disabled";
+
+			hsi2c_26: i2c@14f20000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f20000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI1>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c26_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_15: serial@14f20000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f20000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI1>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart15_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp1: usi@14f300c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C1>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2074>;
+			status = "disabled";
+
+			hsi2c_27: i2c@14f30000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f30000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C1>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c27_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp2: usi@14f400c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI2>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2020>;
+			status = "disabled";
+
+			hsi2c_28: i2c@14f40000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f40000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI2>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c28_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_16: serial@14f40000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f40000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI2>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart16_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp2: usi@14f500c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2024>;
+			status = "disabled";
+
+			hsi2c_29: i2c@14f50000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f50000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c29_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp3: usi@14f600c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI3>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2030>;
+			status = "disabled";
+
+			hsi2c_30: i2c@14f60000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f60000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI3>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c30_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_17: serial@14f60000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f60000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI3>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart17_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp3: usi@14f700c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f700c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2034>;
+			status = "disabled";
+
+			hsi2c_31: i2c@14f70000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f70000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c31_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp4: usi@14f800c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f800c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI4>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2040>;
+			status = "disabled";
+
+			hsi2c_32: i2c@14f80000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f80000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI4>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c32_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_18: serial@14f80000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f80000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI4>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart18_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp4: usi@14f900c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f900c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2044>;
+			status = "disabled";
+
+			hsi2c_33: i2c@14f90000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f90000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c33_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp5: usi@14fa00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fa00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI5>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2050>;
+			status = "disabled";
+
+			hsi2c_34: i2c@14fa0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fa0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI5>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c34_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_19: serial@14fa0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14fa0000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI5>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart19_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp5: usi@14fb00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fb00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2054>;
+			status = "disabled";
+
+			hsi2c_35: i2c@14fb0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fb0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c35_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp6: usi@14fc00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fc00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI6>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2060>;
+			status = "disabled";
+
+			hsi2c_36: i2c@14fc0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fc0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI6>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c36_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_20: serial@14fc0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14fc0000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI6>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart20_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp6: usi@14fd00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fd00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2064>;
+			status = "disabled";
+
+			hsi2c_37: i2c@14fd0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fd0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c37_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp7: usi@14fe00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fe00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2080>;
+			status = "disabled";
+
+			hsi2c_38: i2c@14fe0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fe0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c38_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		cmu_vts: clock-controller@15300000 {
+			compatible = "samsung,exynos2200-cmu-vts";
+			reg = <0x15300000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top CLK_DOUT_CMU_VTS_DMIC>;
+			clock-names = "oscclk", "dmic";
+		};
+
+		pinctrl_vts: pinctrl@15320000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x15320000 0x1000>;
+		};
+
+		cmu_alive: clock-controller@15800000 {
+			compatible = "samsung,exynos2200-cmu-alive";
+			reg = <0x15800000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top CLK_DOUT_CMU_ALIVE_NOC>;
+			clock-names = "oscclk", "noc";
+		};
+
+		pinctrl_alive: pinctrl@15850000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x15850000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos2200-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pmu_system_controller: system-controller@15860000 {
+			compatible = "samsung,exynos2200-pmu",
+				     "samsung,exynos7-pmu", "syscon";
+			reg = <0x15860000 0x10000>;
+
+			reboot: syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x3c00>; /* SYSTEM_CONFIGURATION */
+				mask = <0x2>; /* SWRESET_SYSTEM */
+				value = <0x2>; /* reset value */
+			};
+		};
+
+		cmu_top: clock-controller@1a320000 {
+			compatible = "samsung,exynos2200-cmu-top";
+			reg = <0x1a320000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>;
+			clock-names = "oscclk";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+		/*
+		 * Non-updatable, broken stock Samsung bootloader does not
+		 * configure CNTFRQ_EL0
+		 */
+		clock-frequency = <25600000>;
+	};
+};
+
+#include "exynos2200-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
index 72ccf18eb9d1..540b4d6c9067 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
@@ -6,7 +6,7 @@
  * Chanwoo Choi <cw00.choi@samsung.com>
  */
 
-&soc {
+/ {
 	bus_g2d_400: bus0 {
 		compatible = "samsung,exynos-bus";
 		clocks = <&cmu_top CLK_ACLK_G2D_400>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 91c9bd1b47dd..a1fb354dea9f 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -21,6 +21,8 @@
 		gsc0 = &gsc_0;
 		gsc1 = &gsc_1;
 		gsc2 = &gsc_2;
+		mmc0 = &mshc_0;
+		mmc2 = &mshc_2;
 		pinctrl0 = &pinctrl_alive;
 		pinctrl1 = &pinctrl_aud;
 		pinctrl2 = &pinctrl_cpif;
@@ -40,8 +42,6 @@
 		spi2 = &spi_2;
 		spi3 = &spi_3;
 		spi4 = &spi_4;
-		mshc0 = &mshc_0;
-		mshc2 = &mshc_2;
 	};
 
 	chosen {
@@ -85,7 +85,7 @@
 		};
 	};
 
-	i2c_max98504: i2c-gpio-0 {
+	i2c_max98504: i2c-13 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpd0 1 GPIO_ACTIVE_HIGH>;
 		scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>;
@@ -96,14 +96,21 @@
 		max98504: amplifier@31 {
 			compatible = "maxim,max98504";
 			reg = <0x31>;
-			maxim,rx-path = <1>;
-			maxim,tx-path = <1>;
-			maxim,tx-channel-mask = <3>;
-			maxim,tx-channel-source = <2>;
+
+			DIOVDD-supply = <&ldo3_reg>;
+			DVDD-supply = <&ldo3_reg>;
+			PVDD-supply = <&vph_pwr_regulator>;
 		};
 	};
 
-	irda_regulator: irda-regulator {
+	vph_pwr_regulator: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "VPH_PWR";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+	};
+
+	irda_regulator: regulator-irda {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
@@ -117,20 +124,18 @@
 		audio-amplifier = <&max98504>;
 		mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
 		model = "wm5110";
-		samsung,audio-routing =
-			/* Headphone */
-			"HP", "HPOUT1L",
-			"HP", "HPOUT1R",
-
-			/* Speaker */
-			"SPK", "SPKOUT",
-			"SPKOUT", "HPOUT2L",
-			"SPKOUT", "HPOUT2R",
-
-			/* Receiver */
-			"RCV", "HPOUT3L",
-			"RCV", "HPOUT3R";
-		status = "okay";
+		audio-routing = /* Headphone */
+				"HP", "HPOUT1L",
+				"HP", "HPOUT1R",
+
+				/* Speaker */
+				"SPK", "SPKOUT",
+				"SPKOUT", "HPOUT2L",
+				"SPKOUT", "HPOUT2R",
+
+				/* Receiver */
+				"RCV", "HPOUT3L",
+				"RCV", "HPOUT3R";
 	};
 };
 
@@ -795,7 +800,7 @@
 		reg = <0x27>;
 		interrupt-parent = <&gpa1>;
 		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-		en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
+		en-gpios = <&gpf1 4 GPIO_ACTIVE_LOW>;
 		wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
 	};
 };
@@ -925,7 +930,6 @@
 			compatible = "maxim,max77843-haptic";
 			haptic-supply = <&ldo38_reg>;
 			pwms = <&pwm 0 33670 0>;
-			pwm-names = "haptic";
 		};
 	};
 };
@@ -946,6 +950,7 @@
 
 &mshc_0 {
 	status = "okay";
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	cap-mmc-highspeed;
@@ -1097,7 +1102,7 @@
 
 	te_irq: te-irq-pins {
 		samsung,pins = "gpf1-3";
-		samsung,pin-function = <0xf>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
 	};
 };
 
@@ -1279,11 +1284,13 @@
 
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		wlf,micd-detect-debounce = <300>;
 		wlf,micd-bias-start-time = <0x1>;
 		wlf,micd-rate = <0x7>;
-		wlf,micd-dbtime = <0x1>;
+		wlf,micd-dbtime = <0x2>;
 		wlf,micd-force-micbias;
 		wlf,micd-configs = <0x0 1 0>;
 		wlf,hpdet-channel = <1>;
@@ -1299,6 +1306,8 @@
 		CPVDD-supply = <&ldo18_reg>;
 		DBVDD2-supply = <&ldo18_reg>;
 		DBVDD3-supply = <&ldo18_reg>;
+		SPKVDDL-supply = <&vph_pwr_regulator>;
+		SPKVDDR-supply = <&vph_pwr_regulator>;
 
 		controller-data {
 			samsung,spi-feedback-delay = <0>;
@@ -1315,7 +1324,7 @@
 		reg = <0x0>;
 		spi-max-frequency = <5000000>;
 		power-supply = <&irda_regulator>;
-		duty-cycle = <60>;
+		duty-cycle = /bits/ 8 <60>;
 		led-active-low;
 
 		controller-data {
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index bd6a354b9cb5..fa2029e280a5 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -89,7 +89,6 @@
 			compatible = "arm,cortex-a53";
 			enable-method = "psci";
 			reg = <0x100>;
-			clock-frequency = <1300000000>;
 			clocks = <&cmu_apollo CLK_SCLK_APOLLO>;
 			clock-names = "apolloclk";
 			operating-points-v2 = <&cluster_a53_opp_table>;
@@ -108,7 +107,6 @@
 			compatible = "arm,cortex-a53";
 			enable-method = "psci";
 			reg = <0x101>;
-			clock-frequency = <1300000000>;
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
@@ -125,7 +123,6 @@
 			compatible = "arm,cortex-a53";
 			enable-method = "psci";
 			reg = <0x102>;
-			clock-frequency = <1300000000>;
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
@@ -142,7 +139,6 @@
 			compatible = "arm,cortex-a53";
 			enable-method = "psci";
 			reg = <0x103>;
-			clock-frequency = <1300000000>;
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
@@ -159,7 +155,6 @@
 			compatible = "arm,cortex-a57";
 			enable-method = "psci";
 			reg = <0x0>;
-			clock-frequency = <1900000000>;
 			clocks = <&cmu_atlas CLK_SCLK_ATLAS>;
 			clock-names = "atlasclk";
 			operating-points-v2 = <&cluster_a57_opp_table>;
@@ -178,7 +173,6 @@
 			compatible = "arm,cortex-a57";
 			enable-method = "psci";
 			reg = <0x1>;
-			clock-frequency = <1900000000>;
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
 			i-cache-size = <0xc000>;
@@ -195,7 +189,6 @@
 			compatible = "arm,cortex-a57";
 			enable-method = "psci";
 			reg = <0x2>;
-			clock-frequency = <1900000000>;
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
 			i-cache-size = <0xc000>;
@@ -212,7 +205,6 @@
 			compatible = "arm,cortex-a57";
 			enable-method = "psci";
 			reg = <0x3>;
-			clock-frequency = <1900000000>;
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
 			i-cache-size = <0xc000>;
@@ -226,6 +218,8 @@
 
 		cluster_a57_l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
@@ -233,6 +227,8 @@
 
 		cluster_a53_l2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x40000>;
 			cache-line-size = <64>;
 			cache-sets = <256>;
@@ -355,7 +351,7 @@
 		compatible = "arm,psci";
 		method = "smc";
 		cpu_off = <0x84000002>;
-		cpu_on = <0xC4000003>;
+		cpu_on = <0xc4000003>;
 	};
 
 	soc: soc@0 {
@@ -365,7 +361,8 @@
 		ranges = <0x0 0x0 0x0 0x18000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
+			compatible = "samsung,exynos5433-chipid",
+				     "samsung,exynos4210-chipid";
 			reg = <0x10000000 0x100>;
 		};
 
@@ -854,7 +851,8 @@
 			reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos7-wakeup-eint";
+				compatible = "samsung,exynos5433-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -915,12 +913,20 @@
 		};
 
 		pmu_system_controller: system-controller@105c0000 {
-			compatible = "samsung,exynos5433-pmu", "syscon";
+			compatible = "samsung,exynos5433-pmu", "simple-mfd", "syscon";
 			reg = <0x105c0000 0x5008>;
 			#clock-cells = <1>;
 			clock-names = "clkout16";
 			clocks = <&xxti>;
 
+			mipi_phy: mipi-phy {
+				compatible = "samsung,exynos5433-mipi-video-phy";
+				#phy-cells = <1>;
+				samsung,cam0-sysreg = <&syscon_cam0>;
+				samsung,cam1-sysreg = <&syscon_cam1>;
+				samsung,disp-sysreg = <&syscon_disp>;
+			};
+
 			reboot: syscon-reboot {
 				compatible = "syscon-reboot";
 				regmap = <&pmu_system_controller>;
@@ -931,6 +937,7 @@
 
 		gic: interrupt-controller@11001000 {
 			compatible = "arm,gic-400";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg = <0x11001000 0x1000>,
@@ -940,15 +947,6 @@
 			interrupts = <GIC_PPI 9 0xf04>;
 		};
 
-		mipi_phy: video-phy {
-			compatible = "samsung,exynos5433-mipi-video-phy";
-			#phy-cells = <1>;
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			samsung,cam0-sysreg = <&syscon_cam0>;
-			samsung,cam1-sysreg = <&syscon_cam1>;
-			samsung,disp-sysreg = <&syscon_disp>;
-		};
-
 		decon: decon@13800000 {
 			compatible = "samsung,exynos5433-decon";
 			reg = <0x13800000 0x2104>;
@@ -1024,7 +1022,7 @@
 
 		dsi: dsi@13900000 {
 			compatible = "samsung,exynos5433-mipi-dsi";
-			reg = <0x13900000 0xC0>;
+			reg = <0x13900000 0xc0>;
 			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&mipi_phy 1>;
 			phy-names = "dsim";
@@ -1118,22 +1116,26 @@
 		};
 
 		syscon_disp: syscon@13b80000 {
-			compatible = "samsung,exynos5433-sysreg", "syscon";
+			compatible = "samsung,exynos5433-disp-sysreg",
+				     "samsung,exynos5433-sysreg", "syscon";
 			reg = <0x13b80000 0x1010>;
 		};
 
 		syscon_cam0: syscon@120f0000 {
-			compatible = "samsung,exynos5433-sysreg", "syscon";
+			compatible = "samsung,exynos5433-cam0-sysreg",
+				     "samsung,exynos5433-sysreg", "syscon";
 			reg = <0x120f0000 0x1020>;
 		};
 
 		syscon_cam1: syscon@145f0000 {
-			compatible = "samsung,exynos5433-sysreg", "syscon";
+			compatible = "samsung,exynos5433-cam1-sysreg",
+				     "samsung,exynos5433-sysreg", "syscon";
 			reg = <0x145f0000 0x1038>;
 		};
 
 		syscon_fsys: syscon@156f0000 {
-			compatible = "samsung,exynos5433-sysreg", "syscon";
+			compatible = "samsung,exynos5433-fsys-sysreg",
+				     "samsung,exynos5433-sysreg", "syscon";
 			reg = <0x156f0000 0x1044>;
 		};
 
@@ -1272,7 +1274,7 @@
 
 		mfc: codec@152e0000 {
 			compatible = "samsung,exynos5433-mfc";
-			reg = <0x152E0000 0x10000>;
+			reg = <0x152e0000 0x10000>;
 			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "pclk", "aclk", "aclk_xiu";
 			clocks = <&cmu_mfc CLK_PCLK_MFC>,
@@ -1329,7 +1331,7 @@
 
 		sysmmu_gscl0: sysmmu@13c80000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C80000 0x1000>;
+			reg = <0x13c80000 0x1000>;
 			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "aclk", "pclk";
 			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>,
@@ -1340,7 +1342,7 @@
 
 		sysmmu_gscl1: sysmmu@13c90000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C90000 0x1000>;
+			reg = <0x13c90000 0x1000>;
 			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "aclk", "pclk";
 			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>,
@@ -1351,7 +1353,7 @@
 
 		sysmmu_gscl2: sysmmu@13ca0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13CA0000 0x1000>;
+			reg = <0x13ca0000 0x1000>;
 			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "aclk", "pclk";
 			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>,
@@ -1467,6 +1469,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi0_bus>;
 			num-cs = <1>;
+			fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -1486,6 +1489,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi1_bus>;
 			num-cs = <1>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
@@ -1505,6 +1509,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi2_bus>;
 			num-cs = <1>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
@@ -1524,6 +1529,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi3_bus>;
 			num-cs = <1>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
@@ -1543,11 +1549,12 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi4_bus>;
 			num-cs = <1>;
+			fifo-depth = <64>;
 			status = "disabled";
 		};
 
 		adc: adc@14d10000 {
-			compatible = "samsung,exynos7-adc";
+			compatible = "samsung,exynos5433-adc", "samsung,exynos7-adc";
 			reg = <0x14d10000 0x100>;
 			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "adc";
@@ -1557,7 +1564,7 @@
 		};
 
 		i2s1: i2s@14d60000 {
-			compatible = "samsung,exynos7-i2s";
+			compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s";
 			reg = <0x14d60000 0x100>;
 			dmas = <&pdma0 31>, <&pdma0 30>;
 			dma-names = "tx", "rx";
@@ -1572,7 +1579,7 @@
 		};
 
 		pwm: pwm@14dd0000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "samsung,exynos5433-pwm", "samsung,exynos4210-pwm";
 			reg = <0x14dd0000 0x100>;
 			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
@@ -1587,7 +1594,8 @@
 		};
 
 		hsi2c_0: i2c@14e40000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e40000 0x1000>;
 			interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1600,7 +1608,8 @@
 		};
 
 		hsi2c_1: i2c@14e50000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e50000 0x1000>;
 			interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1613,7 +1622,8 @@
 		};
 
 		hsi2c_2: i2c@14e60000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e60000 0x1000>;
 			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1626,7 +1636,8 @@
 		};
 
 		hsi2c_3: i2c@14e70000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e70000 0x1000>;
 			interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1639,7 +1650,8 @@
 		};
 
 		hsi2c_4: i2c@14ec0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ec0000 0x1000>;
 			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1652,7 +1664,8 @@
 		};
 
 		hsi2c_5: i2c@14ed0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ed0000 0x1000>;
 			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1665,7 +1678,8 @@
 		};
 
 		hsi2c_6: i2c@14ee0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ee0000 0x1000>;
 			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1678,7 +1692,8 @@
 		};
 
 		hsi2c_7: i2c@14ef0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ef0000 0x1000>;
 			interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1691,7 +1706,8 @@
 		};
 
 		hsi2c_8: i2c@14d90000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14d90000 0x1000>;
 			interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1704,7 +1720,8 @@
 		};
 
 		hsi2c_9: i2c@14da0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14da0000 0x1000>;
 			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1717,7 +1734,8 @@
 		};
 
 		hsi2c_10: i2c@14de0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14de0000 0x1000>;
 			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1730,7 +1748,8 @@
 		};
 
 		hsi2c_11: i2c@14df0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14df0000 0x1000>;
 			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1742,7 +1761,7 @@
 			status = "disabled";
 		};
 
-		usbdrd30: usbdrd {
+		usbdrd30: usb@15400000 {
 			compatible = "samsung,exynos5433-dwusb3";
 			clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
 				<&cmu_fsys CLK_SCLK_USBDRD30>,
@@ -1751,16 +1770,16 @@
 			clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x15400000 0x10000>;
 			status = "disabled";
 
-			usbdrd_dwc3: usb@15400000 {
+			usbdrd_dwc3: usb@0 {
 				compatible = "snps,dwc3";
 				clocks = <&cmu_fsys CLK_SCLK_USBDRD30>,
 					<&cmu_fsys CLK_ACLK_USBDRD30>,
 					<&cmu_fsys CLK_SCLK_USBDRD30>;
 				clock-names = "ref", "bus_early", "suspend";
-				reg = <0x15400000 0x10000>;
+				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
@@ -1795,7 +1814,7 @@
 			status = "disabled";
 		};
 
-		usbhost30: usbhost {
+		usbhost30: usb@15a00000 {
 			compatible = "samsung,exynos5433-dwusb3";
 			clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
 				<&cmu_fsys CLK_SCLK_USBHOST30>,
@@ -1804,16 +1823,16 @@
 			clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x15a00000 0x10000>;
 			status = "disabled";
 
-			usbhost_dwc3: usb@15a00000 {
+			usbhost_dwc3: usb@0 {
 				compatible = "snps,dwc3";
 				clocks = <&cmu_fsys CLK_SCLK_USBHOST30>,
 					<&cmu_fsys CLK_ACLK_USBHOST30>,
 					<&cmu_fsys CLK_SCLK_USBHOST30>;
 				clock-names = "ref", "bus_early", "suspend";
-				reg = <0x15a00000 0x10000>;
+				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
@@ -1821,7 +1840,8 @@
 		};
 
 		mshc_0: mmc@15540000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos5433-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1834,7 +1854,8 @@
 		};
 
 		mshc_1: mmc@15550000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos5433-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1847,7 +1868,8 @@
 		};
 
 		mshc_2: mmc@15560000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos5433-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1898,7 +1920,8 @@
 			};
 
 			i2s0: i2s@11440000 {
-				compatible = "samsung,exynos7-i2s";
+				compatible = "samsung,exynos5433-i2s",
+					     "samsung,exynos7-i2s";
 				reg = <0x11440000 0x100>;
 				dmas = <&adma 0>, <&adma 2>;
 				dma-names = "tx", "rx";
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index e38c59cf18dc..1f2eddcebdd9 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -17,9 +17,9 @@
 	compatible = "samsung,exynos7-espresso", "samsung,exynos7";
 
 	aliases {
+		mmc0 = &mmc_0;
+		mmc2 = &mmc_2;
 		serial0 = &serial_2;
-		mshc0 = &mmc_0;
-		mshc2 = &mmc_2;
 	};
 
 	chosen {
@@ -28,7 +28,7 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x0 0x40000000 0x0 0xC0000000>;
+		reg = <0x0 0x40000000 0x0 0xc0000000>;
 	};
 
 	usb30_vbus_reg: regulator-usb30 {
@@ -61,7 +61,6 @@
 
 &gpu {
 	mali-supply = <&buck6_reg>;
-	status = "okay";
 };
 
 &serial_2 {
@@ -79,12 +78,11 @@
 };
 
 &adc {
+	vdd-supply = <&ldo3_reg>;
 	status = "okay";
 };
 
 &hsi2c_4 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <200000>;
 	status = "okay";
 
 	pmic@66 {
@@ -364,6 +362,7 @@
 &mmc_0 {
 	status = "okay";
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	non-removable;
 	card-detect-delay = <200>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 1cd771c90b47..9cb6bd61262e 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -25,7 +25,6 @@
 		pinctrl6 = &pinctrl_fsys0;
 		pinctrl7 = &pinctrl_fsys1;
 		pinctrl8 = &pinctrl_bus1;
-		tmuctrl0 = &tmuctrl_0;
 	};
 
 	arm-pmu {
@@ -107,6 +106,8 @@
 
 		atlas_l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x200000>;
 			cache-line-size = <64>;
 			cache-sets = <2048>;
@@ -117,7 +118,7 @@
 		compatible = "arm,psci";
 		method = "smc";
 		cpu_off = <0x84000002>;
-		cpu_on = <0xC4000003>;
+		cpu_on = <0xc4000003>;
 	};
 
 	soc: soc@0 {
@@ -127,7 +128,8 @@
 		ranges = <0 0 0 0x18000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
+			compatible = "samsung,exynos7-chipid",
+				     "samsung,exynos4210-chipid";
 			reg = <0x10000000 0x100>;
 		};
 
@@ -136,15 +138,15 @@
 			#interrupt-cells = <3>;
 			#address-cells = <0>;
 			interrupt-controller;
-			reg =	<0x11001000 0x1000>,
-				<0x11002000 0x2000>,
-				<0x11004000 0x2000>,
-				<0x11006000 0x2000>;
+			reg = <0x11001000 0x1000>,
+			      <0x11002000 0x2000>,
+			      <0x11004000 0x2000>,
+			      <0x11006000 0x2000>;
 		};
 
 		pdma0: dma-controller@10e10000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10E10000 0x1000>;
+			reg = <0x10e10000 0x1000>;
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_fsys0 ACLK_PDMA0>;
 			clock-names = "apb_pclk";
@@ -153,7 +155,7 @@
 
 		pdma1: dma-controller@10eb0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10EB0000 0x1000>;
+			reg = <0x10eb0000 0x1000>;
 			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_fsys0 ACLK_PDMA1>;
 			clock-names = "apb_pclk";
@@ -278,7 +280,7 @@
 		};
 
 		serial_0: serial@13630000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x13630000 0x100>;
 			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric0 PCLK_UART0>,
@@ -288,7 +290,7 @@
 		};
 
 		serial_1: serial@14c20000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c20000 0x100>;
 			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART1>,
@@ -298,7 +300,7 @@
 		};
 
 		serial_2: serial@14c30000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c30000 0x100>;
 			interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART2>,
@@ -308,7 +310,7 @@
 		};
 
 		serial_3: serial@14c40000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c40000 0x100>;
 			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART3>,
@@ -538,7 +540,7 @@
 		};
 
 		rtc: rtc@10590000 {
-			compatible = "samsung,s3c6410-rtc";
+			compatible = "samsung,exynos7-rtc", "samsung,s3c6410-rtc";
 			reg = <0x10590000 0x100>;
 			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
@@ -558,7 +560,8 @@
 		};
 
 		gpu: gpu@14ac0000 {
-			compatible = "samsung,exynos5433-mali", "arm,mali-t760";
+			compatible = "samsung,exynos7-mali",
+				     "samsung,exynos5433-mali", "arm,mali-t760";
 			reg = <0x14ac0000 0x5000>;
 			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
@@ -618,7 +621,7 @@
 		};
 
 		pwm: pwm@136c0000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "samsung,exynos7-pwm", "samsung,exynos4210-pwm";
 			reg = <0x136c0000 0x100>;
 			interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
@@ -688,7 +691,7 @@
 			#phy-cells = <1>;
 		};
 
-		usbdrd: usb {
+		usbdrd: usb@15400000 {
 			compatible = "samsung,exynos7-dwusb3";
 			clocks = <&clock_fsys0 ACLK_USBDRD300>,
 			       <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
@@ -697,11 +700,11 @@
 				"usbdrd30_axius_clk";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x15400000 0x10000>;
 
-			usb@15400000 {
+			usb@0 {
 				compatible = "snps,dwc3";
-				reg = <0x15400000 0x10000>;
+				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
@@ -732,4 +735,4 @@
 };
 
 #include "exynos7-pinctrl.dtsi"
-#include "arm/exynos-syscon-restart.dtsi"
+#include "arm/samsung/exynos-syscon-restart.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts b/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts
new file mode 100644
index 000000000000..eb7b48593187
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts
@@ -0,0 +1,630 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy A2 Core (a2corelte) device tree source
+ *
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+/dts-v1/;
+#include "exynos7870.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy A2 Core";
+	compatible = "samsung,a2corelte", "samsung,exynos7870";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = &serial2;
+
+		framebuffer@67000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x67000000 (540 * 960 * 4)>;
+			width = <540>;
+			height = <960>;
+			stride = <(540 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "GPIO Keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+
+		key-power {
+			label = "Power Key";
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		key-voldown {
+			label = "Volume Down Key";
+			gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volup {
+			label = "Volume Up Key";
+			gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x3f200000>;
+	};
+
+	pwrseq_mmc1: pwrseq-mmc1 {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+
+	/* mmc2: vmmc */
+	vdd_fixed_mmc2: regulator-fixed-mmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_mmc2";
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		gpio = <&gpc0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_fixed_proxled: regulator-fixed-proxled {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_proxled";
+		regulator-boot-on;
+		regulator-always-on;
+		gpio = <&gpd4 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@46800000 {
+			compatible = "ramoops";
+			reg = <0x0 0x46800000 0x8000>;
+			console-size = <0x4000>;
+			pmsg-size = <0x4000>;
+		};
+
+		framebuffer@67000000 {
+			reg = <0x0 0x67000000 (540 * 960 * 4)>;
+			no-map;
+		};
+	};
+
+	vibrator {
+		compatible = "regulator-haptic";
+		haptic-supply = <&vdd_ldo32>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&hsi2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mpu05-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq>;
+
+		regulators {
+			vdd_buck1: buck1 {
+				regulator-name = "vdd_buck1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck2: buck2 {
+				regulator-name = "vdd_buck2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck3: buck3 {
+				regulator-name = "vdd_buck3";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck4: buck4 {
+				regulator-name = "vdd_buck4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck5: buck5 {
+				regulator-name = "vdd_buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc2: vqmmc */
+			vdd_ldo2: ldo2 {
+				regulator-name = "vdd_ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-name = "vdd_ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* usbdrd: vdd33 */
+			vdd_ldo8: ldo8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo9: ldo9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo25: ldo25 {
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc0: vmmc */
+			vdd_ldo26: ldo26 {
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			/* mmc0: vqmmc */
+			vdd_ldo27: ldo27 {
+				regulator-name = "vdd_ldo27";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo29: ldo29 {
+				regulator-name = "vdd_ldo29";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo30: ldo30 {
+				regulator-name = "vdd_ldo30";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo31: ldo31 {
+				regulator-name = "vdd_ldo31";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vibrator: haptic */
+			vdd_ldo32: ldo32 {
+				regulator-name = "vdd_ldo32";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo33: ldo33 {
+				regulator-name = "vdd_ldo33";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo34: ldo34 {
+				regulator-name = "vdd_ldo34";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* touchscreen: vdd */
+			vdd_ldo35: ldo35 {
+				regulator-name = "vdd_ldo35";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2ds12";
+		reg = <0x1d>;
+		interrupt-parent = <&gpa2>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_irq>;
+
+		st,drdy-int-pin = <1>;
+	};
+
+	proximity@48 {
+		compatible = "sensortek,stk3013", "sensortek,stk3310";
+		reg = <0x48>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <5 IRQ_TYPE_EDGE_BOTH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&proxm_irq>;
+
+		proximity-near-level = <25>;
+	};
+};
+
+&i2c6 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_irq>;
+
+		vdd-supply = <&vdd_ldo35>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			syna,rezero-wait-ms = <200>;
+			syna,clip-x-high = <539>;
+			syna,clip-y-high = <959>;
+			touchscreen-x-mm = <62>;
+			touchscreen-y-mm = <110>;
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+
+	vmmc-supply = <&vdd_ldo26>;
+	vqmmc-supply = <&vdd_ldo27>;
+
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <2 4>;
+	non-removable;
+
+	status = "okay";
+};
+
+&mmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+
+	mmc-pwrseq = <&pwrseq_mmc1>;
+
+	bus-width = <4>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	non-removable;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+		reg = <0x1>;
+		interrupt-names = "host-wake";
+		interrupt-parent = <&gpa2>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4 &dwmmc2_irq>;
+
+	vmmc-supply = <&vdd_fixed_mmc2>;
+	vqmmc-supply = <&vdd_ldo2>;
+
+	bus-width = <4>;
+	card-detect-delay = <200>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	broken-cd;
+	disable-wp;
+
+	status = "okay";
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	accel_irq: accel-irq-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	dwmmc2_irq: dwmmc2-irq-pins {
+		samsung,pins = "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fuel_irq: fuel-irq-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_power: key-power-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pmic_irq: pmic-irq-pins {
+		samsung,pins = "gpa0-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	proxm_irq: proxm-irq-pins {
+		samsung,pins = "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	touch_irq: touch-irq-pins {
+		samsung,pins = "gpa0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	wlan_hostwake: wlan-hostwake-pins {
+		samsung,pins = "gpa2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&pinctrl_top {
+	bt_enable: bt-enable-pins {
+		samsung,pins = "gpd4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	wlan_enable: wlan-enable-pins {
+		samsung,pins = "gpd3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+		samsung,pin-val = <0>;
+	};
+};
+
+&serial1 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43430a1-bt";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_btwake &bt_hostwake &bt_enable>;
+
+		device-wakeup-gpios = <&gpa1 2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpa1 6 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
+
+		max-speed = <3000000>;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&usbdrd {
+	vdd33-supply = <&vdd_ldo8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts b/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts
new file mode 100644
index 000000000000..b8ce433b93b1
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts
@@ -0,0 +1,613 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy J6 (j6lte) device tree source
+ *
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+/dts-v1/;
+#include "exynos7870.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy J6";
+	compatible = "samsung,j6lte", "samsung,exynos7870";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = &serial2;
+
+		framebuffer@67000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x67000000 (720 * 1480 * 4)>;
+			width = <720>;
+			height = <1480>;
+			stride = <(720 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-hall-effect-sensor {
+		compatible = "gpio-keys";
+		label = "GPIO Hall Effect Sensor";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_irq>;
+
+		event-hall-effect-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&gpa1 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "GPIO Keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+
+		key-power {
+			label = "Power Key";
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		key-voldown {
+			label = "Volume Down Key";
+			gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volup {
+			label = "Volume Up Key";
+			gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x3d800000>,
+		      <0x0 0x80000000 0x40000000>;
+	};
+
+	pwrseq_mmc1: pwrseq-mmc1 {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+
+	/* mmc2: vmmc */
+	vdd_fixed_mmc2: regulator-fixed-mmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_mmc2";
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		gpio = <&gpc0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@46e00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x46e00000 0x8000>;
+			console-size = <0x4000>;
+			pmsg-size = <0x4000>;
+		};
+
+		framebuffer@67000000 {
+			reg = <0x0 0x67000000 (720 * 1480 * 4)>;
+			no-map;
+		};
+	};
+
+	vibrator {
+		compatible = "regulator-haptic";
+		haptic-supply = <&vdd_ldo32>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&hsi2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mpu05-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq>;
+
+		regulators {
+			vdd_buck1: buck1 {
+				regulator-name = "vdd_buck1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck2: buck2 {
+				regulator-name = "vdd_buck2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck3: buck3 {
+				regulator-name = "vdd_buck3";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck4: buck4 {
+				regulator-name = "vdd_buck4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck5: buck5 {
+				regulator-name = "vdd_buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc2: vqmmc */
+			vdd_ldo2: ldo2 {
+				regulator-name = "vdd_ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-name = "vdd_ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* usbdrd: vdd33 */
+			vdd_ldo8: ldo8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo9: ldo9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo25: ldo25 {
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc0: vmmc */
+			vdd_ldo26: ldo26 {
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			/* mmc0: vqmmc */
+			vdd_ldo27: ldo27 {
+				regulator-name = "vdd_ldo27";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo29: ldo29 {
+				regulator-name = "vdd_ldo29";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo30: ldo30 {
+				regulator-name = "vdd_ldo30";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo31: ldo31 {
+				regulator-name = "vdd_ldo31";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vibrator: haptic */
+			vdd_ldo32: ldo32 {
+				regulator-name = "vdd_ldo32";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo33: ldo33 {
+				regulator-name = "vdd_ldo33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* touchscreen: vdd */
+			vdd_ldo34: ldo34 {
+				regulator-name = "vdd_ldo34";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_ldo35: ldo35 {
+				regulator-name = "vdd_ldo35";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2ds12";
+		reg = <0x1d>;
+		interrupt-parent = <&gpa2>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_irq>;
+
+		mount-matrix = "-1", "0",  "0",
+				"0", "1",  "0",
+				"0", "0", "-1";
+
+		st,drdy-int-pin = <1>;
+	};
+};
+
+&i2c6 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "zinitix,bt532";
+		reg = <0x20>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_irq>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1480>;
+
+		vdd-supply = <&vdd_ldo34>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+
+	vmmc-supply = <&vdd_ldo26>;
+	vqmmc-supply = <&vdd_ldo27>;
+
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <2 4>;
+	non-removable;
+
+	status = "okay";
+};
+
+&mmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+
+	mmc-pwrseq = <&pwrseq_mmc1>;
+
+	bus-width = <4>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	non-removable;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+		reg = <0x1>;
+		interrupt-names = "host-wake";
+		interrupt-parent = <&gpa2>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4 &dwmmc2_irq>;
+
+	vmmc-supply = <&vdd_fixed_mmc2>;
+	vqmmc-supply = <&vdd_ldo2>;
+
+	bus-width = <4>;
+	card-detect-delay = <200>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	broken-cd;
+	disable-wp;
+
+	status = "okay";
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	accel_irq: accel-irq-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	dwmmc2_irq: dwmmc2-irq-pins {
+		samsung,pins = "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fuel_irq: fuel-irq-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hall_irq: hall-irq-pins {
+		samsung,pins = "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_power: key-power-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pmic_irq: pmic-irq-pins {
+		samsung,pins = "gpa0-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	touch_irq: touch-irq-pins {
+		samsung,pins = "gpa0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	wlan_hostwake: wlan-hostwake-pins {
+		samsung,pins = "gpa2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&pinctrl_top {
+	bt_enable: bt-enable-pins {
+		samsung,pins = "gpd4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	wlan_enable: wlan-enable-pins {
+		samsung,pins = "gpd3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+		samsung,pin-val = <0>;
+	};
+};
+
+&serial1 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43430a1-bt";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_btwake &bt_hostwake &bt_enable>;
+
+		device-wakeup-gpios = <&gpa1 2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpa1 6 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
+
+		max-speed = <3000000>;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&usbdrd {
+	vdd33-supply = <&vdd_ldo8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts b/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts
new file mode 100644
index 000000000000..b1d9eff5a827
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts
@@ -0,0 +1,662 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy J7 Prime (on7xelte) device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+/dts-v1/;
+#include "exynos7870.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy J7 Prime";
+	compatible = "samsung,on7xelte", "samsung,exynos7870";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = &serial2;
+
+		framebuffer@67000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x67000000 (1080 * 1920 * 4)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "GPIO Keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_home &key_power &key_voldown &key_volup>;
+
+		key-home {
+			label = "Home Key";
+			gpios = <&gpa1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+
+		key-power {
+			label = "Power Key";
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		key-voldown {
+			label = "Volume Down Key";
+			gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volup {
+			label = "Volume Up Key";
+			gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x3e400000>,
+		      <0x0 0x80000000 0x80000000>;
+	};
+
+	pwrseq_mmc1: pwrseq-mmc1 {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+
+	/* mmc2: vmmc */
+	vdd_fixed_mmc2: regulator-fixed-mmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_mmc2";
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		gpio = <&gpc0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@46e00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x46e00000 0x8000>;
+			console-size = <0x4000>;
+			pmsg-size = <0x4000>;
+		};
+
+		framebuffer@67000000 {
+			reg = <0x0 0x67000000 (1080 * 1920 * 4)>;
+			no-map;
+		};
+	};
+
+	vibrator {
+		compatible = "regulator-haptic";
+		haptic-supply = <&vdd_ldo32>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&hsi2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mpu05-pmic";
+		reg = <0x66>;
+
+		interrupt-parent = <&gpa0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq>;
+
+		regulators {
+			vdd_buck1: buck1 {
+				regulator-name = "vdd_buck1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck2: buck2 {
+				regulator-name = "vdd_buck2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck3: buck3 {
+				regulator-name = "vdd_buck3";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck4: buck4 {
+				regulator-name = "vdd_buck4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck5: buck5 {
+				regulator-name = "vdd_buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc2: vqmmc */
+			vdd_ldo2: ldo2 {
+				regulator-name = "vdd_ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-name = "vdd_ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* usbdrd: vdd33 */
+			vdd_ldo8: ldo8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo9: ldo9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo25: ldo25 {
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc0: vmmc */
+			vdd_ldo26: ldo26 {
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc0: vqmmc */
+			vdd_ldo27: ldo27 {
+				regulator-name = "vdd_ldo27";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo29: ldo29 {
+				regulator-name = "vdd_ldo29";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo30: ldo30 {
+				regulator-name = "vdd_ldo30";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo31: ldo31 {
+				regulator-name = "vdd_ldo31";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vibrator: haptic */
+			vdd_ldo32: ldo32 {
+				regulator-name = "vdd_ldo32";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo33: ldo33 {
+				regulator-name = "vdd_ldo33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo34: ldo34 {
+				regulator-name = "vdd_ldo34";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo35: ldo35 {
+				regulator-name = "vdd_ldo35";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	touchscreen@70 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x70>;
+		interrupt-parent = <&gpc3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_irq>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			syna,rezero-wait-ms = <200>;
+			syna,clip-x-high = <1079>;
+			syna,clip-y-high = <1919>;
+			touchscreen-x-mm = <68>;
+			touchscreen-y-mm = <121>;
+		};
+	};
+};
+
+&i2c7 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2hh12";
+		reg = <0x1d>;
+		interrupt-parent = <&gpa2>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_irq>;
+
+		mount-matrix = "1",  "0",  "0",
+			       "0", "-1",  "0",
+			       "0",  "0", "-1";
+
+		st,drdy-int-pin = <1>;
+	};
+};
+
+&i2c8 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	proximity@48 {
+		compatible = "sensortek,stk3013", "sensortek,stk3310";
+		reg = <0x48>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <5 IRQ_TYPE_EDGE_BOTH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&proxm_irq>;
+
+		proximity-near-level = <25>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+
+	vmmc-supply = <&vdd_ldo26>;
+	vqmmc-supply = <&vdd_ldo27>;
+
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <2 4>;
+	non-removable;
+
+	status = "okay";
+};
+
+&mmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+
+	mmc-pwrseq = <&pwrseq_mmc1>;
+
+	bus-width = <4>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	non-removable;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+		reg = <0x1>;
+		interrupt-names = "host-wake";
+		interrupt-parent = <&gpa2>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4 &dwmmc2_irq>;
+
+	vmmc-supply = <&vdd_fixed_mmc2>;
+	vqmmc-supply = <&vdd_ldo2>;
+
+	bus-width = <4>;
+	card-detect-delay = <200>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	broken-cd;
+	disable-wp;
+
+	status = "okay";
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	accel_irq: accel-irq-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	dwmmc2_irq: dwmmc2-irq-pins {
+		samsung,pins = "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fuel_irq: fuel-irq-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_home: key-home-pins {
+		samsung,pins = "gpa1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_power: key-power-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pmic_irq: pmic-irq-pins {
+		samsung,pins = "gpa0-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	proxm_irq: proxm-irq-pins {
+		samsung,pins = "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	tkey_irq: tkey-irq-pins {
+		samsung,pins = "gpa1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	wlan_hostwake: wlan-hostwake-pins {
+		samsung,pins = "gpa2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&pinctrl_top {
+	bt_enable: bt-enable-pins {
+		samsung,pins = "gpd4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	wlan_enable: wlan-enable-pins {
+		samsung,pins = "gpd3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+		samsung,pin-val = <0>;
+	};
+};
+
+&pinctrl_touch {
+	touch_irq: touch-irq-pins {
+		samsung,pins = "gpc3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&serial1 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43430a1-bt";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_btwake &bt_hostwake &bt_enable>;
+
+		device-wakeup-gpios = <&gpa1 2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpa1 6 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpd4 1 GPIO_ACTIVE_HIGH>;
+
+		max-speed = <3000000>;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&usbdrd {
+	vdd33-supply = <&vdd_ldo8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7870-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7870-pinctrl.dtsi
new file mode 100644
index 000000000000..99a28d06aee7
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7870-pinctrl.dtsi
@@ -0,0 +1,1021 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos7870 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	etc0: etc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	etc1: etc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	bt_btwake: bt-btwake-pins {
+		samsung,pins = "gpa1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_hostwake: bt-hostwake-pins {
+		samsung,pins = "gpa1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	gnss_sensor_i2c: gnss-sensor-i2c-pins {
+		samsung,pins = "gpa2-5", "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	gnss_sensor_irq: gnss-sensor-irq-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	nfc_int: nfc-int-pins {
+		samsung,pins = "gpa2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpa1-1", "gpa1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_sleep: uart2-sleep-pins {
+		samsung,pins = "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_dispaud {
+	gpz0: gpz0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpz1: gpz1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpz2: gpz2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s_amp_bus: i2s-amp-bus-pins {
+		samsung,pins = "gpz1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_amp_bus_idle: i2s-amp-bus-idle-pins {
+		samsung,pins = "gpz1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_bt_bus: i2s-bt-bus-pins {
+		samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_bt_bus_idle: i2s-bt-bus-idle-pins {
+		samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_pmic_amp_bus: i2s-pmic-amp-bus-pins {
+		samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3", "gpz1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	i2s_pmic_amp_bus_idle: i2s-pmic-amp-bus-idle-pins {
+		samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3", "gpz1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	i2s_pmic_bus: i2s-pmic-bus-pins {
+		samsung,pins = "gpz1-0", "gpz1-2", "gpz1-3", "gpz1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	i2s_pmic_bus_idle: i2s-pmic-bus-idle-pins {
+		samsung,pins = "gpz1-0", "gpz1-2", "gpz1-3", "gpz1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	i2s_fm_bus: i2s-fm-bus-pins {
+		samsung,pins = "gpz2-0", "gpz2-1", "gpz2-2", "gpz2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_fm_bus_idle: i2s-fm-bus-idle-pins {
+		samsung,pins = "gpz2-0", "gpz2-1", "gpz2-2", "gpz2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+};
+
+&pinctrl_ese {
+	gpc7: gpc7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpc7-3", "gpc7-2", "gpc7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	spi0_cs0: spi0-cs0-pins {
+		samsung,pins = "gpc7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	spi0_cs1: spi0-cs1-pins {
+		samsung,pins = "gpc7-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_fsys {
+	gpr0: gpr0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr1: gpr1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr2: gpr2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr3: gpr3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr4: gpr4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	sd0_bus1: sd0-bus-width1-pins {
+		samsung,pins = "gpr1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_bus4: sd0-bus-width4-pins {
+		samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_bus8: sd0-bus-width8-pins {
+		samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_clk: sd0-clk-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_clk_fast_slew_rate_1x: sd0-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	sd0_clk_fast_slew_rate_2x: sd0-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR2>;
+	};
+
+	sd0_clk_fast_slew_rate_3x: sd0-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_clk_fast_slew_rate_4x: sd0-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd0_clk_fast_slew_rate_5x: sd0-clk-fast-slew-rate-5x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR5>;
+	};
+
+	sd0_clk_fast_slew_rate_6x: sd0-clk-fast-slew-rate-6x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	sd0_cmd: sd0-cmd-pins {
+		samsung,pins = "gpr0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_rdqs: sd0-rdqs-pins {
+		samsung,pins = "gpr0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd1_bus1: sd1-bus-width1-pins {
+		samsung,pins = "gpr3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd1_bus4: sd1-bus-width4-pins {
+		samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd1_clk: sd1-clk-pins {
+		samsung,pins = "gpr2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd1_cmd: sd1-cmd-pins {
+		samsung,pins = "gpr2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpr4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpr4-3", "gpr4-4", "gpr4-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR2>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpr4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+};
+
+&pinctrl_mif {
+	gpm0: gpm0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpm0-1", "gpm0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_nfc {
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2c6_bus: i2c6-bus-pins {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	nfc_en: nfc-en-pins {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+		samsung,pin-val = <1>;
+	};
+
+	nfc_n5_clk_req: nfc-n5-clk-req-pins {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	nfc_pd: nfc-pd-pins {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_top {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc4: gpc4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc5: gpc5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc6: gpc6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc8: gpc8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc9: gpc9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd3: gpd3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd4: gpd4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	decon_te_off: decon-te-off-pins {
+		samsung,pins = "gpe0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+	};
+
+	decon_te_on: decon-te-on-pins {
+		samsung,pins = "gpe0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	ese_pvdd_en: ese-pvdd-en-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	fimc_is_flash: fimc-is-flash-pins {
+		samsung,pins = "gpd3-2", "gpd3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_mclk0_fn: fimc-is-mclk0-fn-pins {
+		samsung,pins = "gpe0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR2>;
+	};
+
+	fimc_is_mclk0_in: fimc-is-mclk0-in-pins {
+		samsung,pins = "gpe0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_mclk0_out: fimc-is-mclk0-out-pins {
+		samsung,pins = "gpe0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	fimc_is_mclk1_fn: fimc-is-mclk1-fn-pins {
+		samsung,pins = "gpe0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR2>;
+	};
+
+	fimc_is_mclk1_in: fimc-is-mclk1-in-pins {
+		samsung,pins = "gpe0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_mclk1_out: fimc-is-mclk1-out-pins {
+		samsung,pins = "gpe0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	fimc_is_mclk2_fn: fimc-is-mclk2-fn-pins {
+		samsung,pins = "gpf4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	fimc_is_mclk2_out: fimc-is-mclk2-out-pins {
+		samsung,pins = "gpf4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+		samsung,pin-val = <0>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpf0-1", "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpf1-1", "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpf0-3", "gpf0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpf2-1", "gpf2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpf3-0", "gpf3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c0_bus: i2c0-bus-pins {
+		samsung,pins = "gpc4-1", "gpc4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c2_bus: i2c2-bus-pins {
+		samsung,pins = "gpc8-1", "gpc8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c3_bus: i2c3-bus-pins {
+		samsung,pins = "gpc9-1", "gpc9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c4_bus: i2c4-bus-pins {
+		samsung,pins = "gpc1-1", "gpc1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c5_bus: i2c5-bus-pins {
+		samsung,pins = "gpc1-3", "gpc1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c7_bus: i2c7-bus-pins {
+		samsung,pins = "gpc4-3", "gpc4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c8_bus: i2c8-bus-pins {
+		samsung,pins = "gpc5-1", "gpc5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	nfc_n5_firm: nfc-n5-firm-pins {
+		samsung,pins = "gpd4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-val = <1>;
+	};
+
+	nfc_pvdd_en: nfc-pvdd-en-pins {
+		samsung,pins = "gpd2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	pwm_tout0: pwm-tout0-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pwm_tout1: pwm-tout1-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpf3-3", "gpf3-2", "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi1_cs0: spi1-cs0-pins {
+		samsung,pins = "gpf3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi1_cs1: spi1-cs1-pins {
+		samsung,pins = "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpf4-3", "gpf4-2", "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi2_cs0: spi2-cs0-pins {
+		samsung,pins = "gpf4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi2_cs1: spi2-cs1-pins {
+		samsung,pins = "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpc6-0", "gpc6-2", "gpc6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi3_bus_suspend: spi3-bus-suspend-pins {
+		samsung,pins = "gpc6-0", "gpc6-2", "gpc6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpc6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpc4-2", "gpc5-0", "gpc5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpc4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpc4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi4_miso: spi4-miso-pins {
+		samsung,pins = "gpc5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	spi4_mosi_sck_ssn: spi4-mosi-sck-ssn-pins {
+		samsung,pins = "gpc5-1", "gpc4-2", "gpc4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	uart0_bus: uart0-bus-pins {
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pins = "gpd2-3", "gpd2-2", "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	uart1_bus: uart1-bus-pins {
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pins = "gpb0-3", "gpb0-2", "gpb0-1", "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+};
+
+&pinctrl_touch {
+	gpc3: gpc3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2c1_bus: i2c1-bus-pins {
+		samsung,pins = "gpc3-1", "gpc3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	ese_cs_func: ese-cs-func-pins {
+		samsung,pins = "gpc3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+		samsung,pin-val = <1>;
+	};
+
+	ese_cs_func_suspend: ese-cs-func-suspend-pins {
+		samsung,pins = "gpc3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7870.dtsi b/arch/arm64/boot/dts/exynos/exynos7870.dtsi
new file mode 100644
index 000000000000..d5d347623b90
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7870.dtsi
@@ -0,0 +1,713 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos7870 SoC device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+#include <dt-bindings/clock/samsung,exynos7870-cmu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos7870";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_dispaud;
+		pinctrl2 = &pinctrl_ese;
+		pinctrl3 = &pinctrl_fsys;
+		pinctrl4 = &pinctrl_mif;
+		pinctrl5 = &pinctrl_nfc;
+		pinctrl6 = &pinctrl_top;
+		pinctrl7 = &pinctrl_touch;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	oscclk: oscclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0xc4000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x20000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		chipid@10100000 {
+			compatible = "samsung,exynos7870-chipid",
+				     "samsung,exynos4210-chipid";
+			reg = <0x10100000 0x100>;
+		};
+
+		cmu_peri: clock-controller@101f0000 {
+			compatible = "samsung,exynos7870-cmu-peri";
+			reg = <0x101f0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "bus", "spi0", "spi1", "spi2",
+				      "spi3", "spi4", "uart0", "uart1", "uart2";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_BUS>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI0>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI1>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI2>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI3>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI4>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART0>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART1>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART2>;
+		};
+
+		cmu_mif: clock-controller@10460000 {
+			compatible = "samsung,exynos7870-cmu-mif";
+			reg = <0x10460000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk";
+			clocks = <&oscclk>;
+		};
+
+		pmu_system_controller: system-controller@10480000 {
+			compatible = "samsung,exynos7870-pmu",
+				     "samsung,exynos7-pmu", "syscon";
+			reg = <0x10480000 0x10000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x080c>;
+				mode-bootloader = <0x1234567d>;
+				mode-download = <0x12345671>;
+				mode-recovery = <0x12345674>;
+			};
+		};
+
+		gic: interrupt-controller@104e1000 {
+			compatible = "arm,cortex-a15-gic";
+			reg = <0x104e1000 0x1000>,
+			      <0x104e2000 0x1000>,
+			      <0x104e4000 0x2000>,
+			      <0x104e6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <3>;
+		};
+
+		hsi2c0: i2c@10510000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x10510000 0x2000>;
+			interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c0_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_mif CLK_GOUT_MIF_HSI2C_IPCLK>;
+
+			status = "disabled";
+		};
+
+		pinctrl_mif: pinctrl@10530000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x10530000 0x1000>;
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gpu: gpu@11400000 {
+			compatible = "samsung,exynos7870-mali", "arm,mali-t830";
+			reg = <0x11400000 0x5000>;
+			interrupt-names = "job", "mmu", "gpu";
+			interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>;
+
+			clock-names = "core", "bus";
+			clocks = <&cmu_g3d CLK_GOUT_G3D_CLK>,
+				 <&cmu_g3d CLK_GOUT_G3D_ASYNCS_D0_CLK>;
+
+			status = "disabled";
+		};
+
+		cmu_g3d: clock-controller@11460000 {
+			compatible = "samsung,exynos7870-cmu-g3d";
+			reg = <0x11460000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "switch";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_G3D_SWITCH>;
+		};
+
+		cmu_mfcmscl: clock-controller@12cb0000 {
+			compatible = "samsung,exynos7870-cmu-mfcmscl";
+			reg = <0x12cb0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "mfc", "mscl";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_MFCMSCL_MFC>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_MFCMSCL_MSCL>;
+		};
+
+		mmc0: mmc@13540000 {
+			compatible = "samsung,exynos7870-dw-mshc-smu";
+			reg = <0x13540000 0x2000>;
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+
+			clock-names = "biu", "ciu";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_MMC0_ACLK>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_MMC0>;
+
+			status = "disabled";
+		};
+
+		mmc1: mmc@13550000 {
+			compatible = "samsung,exynos7870-dw-mshc-smu";
+			reg = <0x13550000 0x2000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+
+			clock-names = "biu", "ciu";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_MMC1_ACLK>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_MMC1>;
+
+			status = "disabled";
+		};
+
+		mmc2: mmc@13560000 {
+			compatible = "samsung,exynos7870-dw-mshc-smu";
+			reg = <0x13560000 0x2000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+
+			clock-names = "biu", "ciu";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_MMC2_ACLK>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_MMC2>;
+
+			status = "disabled";
+		};
+
+		usbdrd_phy: phy@135c0000 {
+			compatible = "samsung,exynos7870-usbdrd-phy";
+			reg = <0x135c0000 0x100>;
+			#phy-cells = <1>;
+
+			clock-names = "phy", "ref";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_MUX_USB20DRD_PHYCLOCK_USER>,
+				 <&cmu_fsys CLK_GOUT_FSYS_MUX_USB_PLL>;
+
+			samsung,pmu-syscon = <&pmu_system_controller>;
+		};
+
+		usbdrd: usb@13600000 {
+			compatible = "samsung,exynos7870-dwusb3";
+			ranges = <0x0 0x13600000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			clock-names = "bus_early", "ref", "ctrl";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_USB20DRD_ACLK_HSDRD>,
+				 <&cmu_fsys CLK_GOUT_FSYS_USB20DRD_HSDRD_REF_CLK>,
+				 <&cmu_fsys CLK_GOUT_FSYS_USB20DRD_HCLK_USB20_CTRL>;
+
+			status = "disabled";
+
+			usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+
+				phy-names = "usb2-phy";
+				phys = <&usbdrd_phy 0>;
+
+				usb-role-switch;
+				snps,usb2-gadget-lpm-disable;
+			};
+		};
+
+		cmu_fsys: clock-controller@13730000 {
+			compatible = "samsung,exynos7870-cmu-fsys";
+			reg = <0x13730000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "bus", "usb20drd";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_BUS>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_USB20DRD_REFCLK>;
+		};
+
+		pinctrl_fsys: pinctrl@13750000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x13750000 0x1000>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serial0: serial@13800000 {
+			compatible = "samsung,exynos7870-uart",
+				     "samsung,exynos8895-uart";
+			reg = <0x13800000 0x100>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_bus>;
+
+			clock-names = "uart", "clk_uart_baud0";
+			clocks = <&cmu_peri CLK_GOUT_PERI_UART0_PCLK>,
+				 <&cmu_peri CLK_GOUT_PERI_UART0_EXT_UCLK>;
+
+			samsung,uart-fifosize = <16>;
+
+			status = "disabled";
+		};
+
+		serial1: serial@13810000 {
+			compatible = "samsung,exynos7870-uart",
+				     "samsung,exynos8895-uart";
+			reg = <0x13810000 0x100>;
+			interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_bus>;
+
+			clock-names = "uart", "clk_uart_baud0";
+			clocks = <&cmu_peri CLK_GOUT_PERI_UART1_PCLK>,
+				 <&cmu_peri CLK_GOUT_PERI_UART1_EXT_UCLK>;
+
+			samsung,uart-fifosize = <256>;
+
+			status = "disabled";
+		};
+
+		serial2: serial@13820000 {
+			compatible = "samsung,exynos7870-uart",
+				     "samsung,exynos8895-uart";
+			reg = <0x13820000 0x100>;
+			interrupts = <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_bus>;
+
+			clock-names = "uart", "clk_uart_baud0";
+			clocks = <&cmu_peri CLK_GOUT_PERI_UART2_PCLK>,
+				 <&cmu_peri CLK_GOUT_PERI_UART2_EXT_UCLK>;
+
+			samsung,uart-fifosize = <256>;
+
+			status = "disabled";
+		};
+
+		i2c0: i2c@13830000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13830000 0x100>;
+			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C0_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c1: i2c@13840000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13840000 0x100>;
+			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C1_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c2: i2c@13850000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13850000 0x100>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C2_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c3: i2c@13860000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C3_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c4: i2c@13870000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C4_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c5: i2c@13880000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C5_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c6: i2c@13890000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C6_PCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c1: i2c@138a0000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x138a0000 0x1000>;
+			interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c1_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C1_IPCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c2: i2c@138b0000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x138b0000 0x1000>;
+			interrupts = <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c2_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C2_IPCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c3: i2c@138c0000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x138c0000 0x1000>;
+			interrupts = <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c3_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C3_IPCLK>;
+
+			status = "disabled";
+		};
+
+		i2c7: i2c@138d0000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x138d0000 0x100>;
+			interrupts = <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C7_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c8: i2c@138e0000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x138e0000 0x100>;
+			interrupts = <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c8_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C8_PCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c4: i2c@138f0000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x138f0000 0x1000>;
+			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c4_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C4_IPCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c5: i2c@13950000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x13950000 0x1000>;
+			interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c5_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C5_IPCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c6: i2c@13960000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x13960000 0x1000>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c6_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C6_IPCLK>;
+
+			status = "disabled";
+		};
+
+		pinctrl_top: pinctrl@139b0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139b0000 0x1000>;
+			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_nfc: pinctrl@139c0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139c0000 0x1000>;
+			interrupts = <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_touch: pinctrl@139d0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139d0000 0x1000>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_ese: pinctrl@139e0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139e0000 0x1000>;
+			interrupts = <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_alive: pinctrl@139f0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139f0000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos7870-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		cmu_isp: clock-controller@144d0000 {
+			compatible = "samsung,exynos7870-cmu-isp";
+			reg = <0x144d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "cam", "isp", "vra";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_ISP_CAM>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_ISP_ISP>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_ISP_VRA>;
+		};
+
+		pinctrl_dispaud: pinctrl@148c0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x148c0000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_dispaud: clock-controller@148d0000 {
+			compatible = "samsung,exynos7870-cmu-dispaud";
+			reg = <0x148d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "bus", "decon_eclk", "decon_vclk";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_BUS>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_DECON_ECLK>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_DECON_VCLK>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+
+		/*
+		 * Non-updatable, broken stock Samsung bootloader does not
+		 * configure CNTFRQ_EL0
+		 */
+		clock-frequency = <26000000>;
+	};
+};
+
+#include "exynos7870-pinctrl.dtsi"
+#include "arm/samsung/exynos-syscon-restart.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
index 5db9a81ac7bb..9d74fa6bfed9 100644
--- a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
@@ -18,6 +18,7 @@
 	chassis-type = "handset";
 
 	aliases {
+		mmc0 = &mmc_0;
 		serial0 = &serial_0;
 		serial1 = &serial_1;
 		serial2 = &serial_2;
@@ -31,7 +32,7 @@
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x3da00000>,
 		      <0x0 0xc0000000 0x40000000>,
-		      <0x8 0x80000000 0x40000000>;
+		      <0x8 0x80000000 0x80000000>;
 	};
 
 	gpio-keys {
diff --git a/arch/arm64/boot/dts/exynos/exynos7885.dtsi b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
index 23c2e0bb0a2c..008228fb319a 100644
--- a/arch/arm64/boot/dts/exynos/exynos7885.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
@@ -172,7 +172,8 @@
 		ranges = <0x0 0x0 0x0 0x20000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos850-chipid";
+			compatible = "samsung,exynos7885-chipid",
+				     "samsung,exynos850-chipid";
 			reg = <0x10000000 0x24>;
 		};
 
@@ -264,7 +265,8 @@
 			reg = <0x11cb0000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos7-wakeup-eint";
+				compatible = "samsung,exynos7885-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
 			};
@@ -289,12 +291,14 @@
 		};
 
 		pmu_system_controller: system-controller@11c80000 {
-			compatible = "samsung,exynos7-pmu", "syscon";
+			compatible = "samsung,exynos7885-pmu",
+				     "samsung,exynos7-pmu", "syscon";
 			reg = <0x11c80000 0x10000>;
 		};
 
 		mmc_0: mmc@13500000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos7885-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			reg = <0x13500000 0x2000>;
 			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -307,7 +311,8 @@
 		};
 
 		serial_0: serial@13800000 {
-			compatible = "samsung,exynos5433-uart";
+			compatible = "samsung,exynos7885-uart",
+				     "samsung,exynos5433-uart";
 			reg = <0x13800000 0x100>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -320,7 +325,8 @@
 		};
 
 		serial_1: serial@13810000 {
-			compatible = "samsung,exynos5433-uart";
+			compatible = "samsung,exynos7885-uart",
+				     "samsung,exynos5433-uart";
 			reg = <0x13810000 0x100>;
 			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -333,7 +339,8 @@
 		};
 
 		serial_2: serial@13820000 {
-			compatible = "samsung,exynos5433-uart";
+			compatible = "samsung,exynos7885-uart",
+				     "samsung,exynos5433-uart";
 			reg = <0x13820000 0x100>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -346,7 +353,8 @@
 		};
 
 		i2c_0: i2c@13830000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13830000 0x100>;
 			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -359,7 +367,8 @@
 		};
 
 		i2c_1: i2c@13840000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13840000 0x100>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -372,7 +381,8 @@
 		};
 
 		i2c_2: i2c@13850000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13850000 0x100>;
 			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -385,7 +395,8 @@
 		};
 
 		i2c_3: i2c@13860000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13860000 0x100>;
 			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -398,7 +409,8 @@
 		};
 
 		i2c_4: i2c@13870000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13870000 0x100>;
 			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -411,7 +423,8 @@
 		};
 
 		i2c_5: i2c@13880000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13880000 0x100>;
 			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -424,7 +437,8 @@
 		};
 
 		i2c_6: i2c@13890000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13890000 0x100>;
 			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -437,7 +451,8 @@
 		};
 
 		i2c_7: i2c@11cd0000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x11cd0000 0x100>;
 			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -452,4 +467,4 @@
 };
 
 #include "exynos7885-pinctrl.dtsi"
-#include "arm/exynos-syscon-restart.dtsi"
+#include "arm/samsung/exynos-syscon-restart.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
index f52a55f644f7..ab076d326a49 100644
--- a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
+++ b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
@@ -21,6 +21,7 @@
 	compatible = "winlink,e850-96", "samsung,exynos850";
 
 	aliases {
+		ethernet0 = &ethernet;
 		mmc0 = &mmc_0;
 		serial0 = &serial_0;
 	};
@@ -29,17 +30,25 @@
 		stdout-path = &serial_0;
 	};
 
-	/*
-	 * RAM: 4 GiB (eMCP):
-	 *   - 2 GiB at 0x80000000
-	 *   - 2 GiB at 0x880000000
-	 *
-	 * 0xbab00000..0xbfffffff: secure memory (85 MiB).
-	 */
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		label = "micro-USB";
+		type = "micro";
+		vbus-supply = <&reg_usb_host_vbus>;
+		id-gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&micro_usb_det_pins>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+	};
+
 	memory@80000000 {
 		device_type = "memory";
-		reg = <0x0 0x80000000 0x3ab00000>,
-		      <0x0 0xc0000000 0x40000000>,
+		reg = <0x0 0x80000000 0x80000000>,
 		      <0x8 0x80000000 0x80000000>;
 	};
 
@@ -106,11 +115,45 @@
 			gpios = <&gpg2 7 GPIO_ACTIVE_HIGH>;
 			color = <LED_COLOR_ID_BLUE>;
 			function = LED_FUNCTION_BLUETOOTH;
-			linux,default-trigger = "hci0rx";
+			linux,default-trigger = "hci0-power";
 			default-state = "off";
 		};
 	};
 
+	/* TODO: Remove this once PMIC is implemented  */
+	reg_dummy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy_reg";
+	};
+
+	reg_usb_host_vbus: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_host_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpa3 5 GPIO_ACTIVE_LOW>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		secure_mem: memory@bab00000 {
+			reg = <0x0 0xbab00000 0x5500000>;
+			no-map;
+		};
+
+		ramoops@f0000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xf0000000 0x200000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			ftrace-size = <0x100000>;
+			pmsg-size = <0x20000>;
+		};
+	};
+
 	/*
 	 * RTC clock (XrtcXTI); external, must be 32.768 kHz.
 	 *
@@ -172,6 +215,12 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
+
+	micro_usb_det_pins: micro-usb-det-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
 };
 
 &rtc {
@@ -186,6 +235,42 @@
 	pinctrl-0 = <&uart1_pins>;
 };
 
+&usbdrd {
+	status = "okay";
+	vdd10-supply = <&reg_dummy>;
+	vdd33-supply = <&reg_dummy>;
+};
+
+&usbdrd_dwc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "host";
+
+	hub@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+&usbdrd_phy {
+	status = "okay";
+};
+
 &usi_uart {
 	samsung,clkreq-on; /* needed for UART mode */
 	status = "okay";
diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
index 9076afd4bb3e..cb55015c8dce 100644
--- a/arch/arm64/boot/dts/exynos/exynos850.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -93,6 +93,8 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0>;
 			enable-method = "psci";
+			clocks = <&cmu_cpucl0 CLK_CLUSTER0_SCLK>;
+			clock-names = "cluster0_clk";
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
@@ -117,6 +119,8 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x100>;
 			enable-method = "psci";
+			clocks = <&cmu_cpucl1 CLK_CLUSTER1_SCLK>;
+			clock-names = "cluster1_clk";
 		};
 		cpu5: cpu@101 {
 			device_type = "cpu";
@@ -184,6 +188,16 @@
 			clock-names = "fin_pll", "mct";
 		};
 
+		pdma0: dma-controller@120c0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x120c0000 0x1000>;
+			clocks = <&cmu_core CLK_GOUT_PDMA_CORE_ACLK>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			interrupts = <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>;
+			arm,pl330-broken-no-flushp;
+		};
+
 		gic: interrupt-controller@12a01000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -200,7 +214,6 @@
 		pmu_system_controller: system-controller@11860000 {
 			compatible = "samsung,exynos850-pmu", "syscon";
 			reg = <0x11860000 0x10000>;
-			clocks = <&cmu_apm CLK_GOUT_PMU_ALIVE_PCLK>;
 
 			reboot: syscon-reboot {
 				compatible = "syscon-reboot";
@@ -245,6 +258,37 @@
 				      "dout_peri_uart", "dout_peri_ip";
 		};
 
+		cmu_cpucl1: clock-controller@10800000 {
+			compatible = "samsung,exynos850-cmu-cpucl1";
+			reg = <0x10800000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_CPUCL1_SWITCH>,
+				 <&cmu_top CLK_DOUT_CPUCL1_DBG>;
+			clock-names = "oscclk", "dout_cpucl1_switch",
+				      "dout_cpucl1_dbg";
+		};
+
+		cmu_cpucl0: clock-controller@10900000 {
+			compatible = "samsung,exynos850-cmu-cpucl0";
+			reg = <0x10900000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_CPUCL0_SWITCH>,
+				 <&cmu_top CLK_DOUT_CPUCL0_DBG>;
+			clock-names = "oscclk", "dout_cpucl0_switch",
+				      "dout_cpucl0_dbg";
+		};
+
+		cmu_g3d: clock-controller@11400000 {
+			compatible = "samsung,exynos850-cmu-g3d";
+			reg = <0x11400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_G3D_SWITCH>;
+			clock-names = "oscclk", "dout_g3d_switch";
+		};
+
 		cmu_apm: clock-controller@11800000 {
 			compatible = "samsung,exynos850-cmu-apm";
 			reg = <0x11800000 0x8000>;
@@ -286,6 +330,21 @@
 			clock-names = "oscclk";
 		};
 
+		cmu_mfcmscl: clock-controller@12c00000 {
+			compatible = "samsung,exynos850-cmu-mfcmscl";
+			reg = <0x12c00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_MFCMSCL_MFC>,
+				 <&cmu_top CLK_DOUT_MFCMSCL_M2M>,
+				 <&cmu_top CLK_DOUT_MFCMSCL_MCSC>,
+				 <&cmu_top CLK_DOUT_MFCMSCL_JPEG>;
+			clock-names = "oscclk", "dout_mfcmscl_mfc",
+				      "dout_mfcmscl_m2m", "dout_mfcmscl_mcsc",
+				      "dout_mfcmscl_jpeg";
+		};
+
 		cmu_dpu: clock-controller@13000000 {
 			compatible = "samsung,exynos850-cmu-dpu";
 			reg = <0x13000000 0x8000>;
@@ -308,12 +367,36 @@
 				      "dout_hsi_mmc_card", "dout_hsi_usb20drd";
 		};
 
+		cmu_is: clock-controller@14500000 {
+			compatible = "samsung,exynos850-cmu-is";
+			reg = <0x14500000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_IS_BUS>,
+				 <&cmu_top CLK_DOUT_IS_ITP>,
+				 <&cmu_top CLK_DOUT_IS_VRA>,
+				 <&cmu_top CLK_DOUT_IS_GDC>;
+			clock-names = "oscclk", "dout_is_bus", "dout_is_itp",
+				      "dout_is_vra", "dout_is_gdc";
+		};
+
+		cmu_aud: clock-controller@14a00000 {
+			compatible = "samsung,exynos850-cmu-aud";
+			reg = <0x14a00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_AUD>;
+			clock-names = "oscclk", "dout_aud";
+		};
+
 		pinctrl_alive: pinctrl@11850000 {
 			compatible = "samsung,exynos850-pinctrl";
 			reg = <0x11850000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos850-wakeup-eint";
+				compatible = "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 			};
 		};
 
@@ -322,7 +405,8 @@
 			reg = <0x11c30000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos850-wakeup-eint";
+				compatible = "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 			};
 		};
 
@@ -332,6 +416,14 @@
 			interrupts = <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		trng: rng@12081400 {
+			compatible = "samsung,exynos850-trng";
+			reg = <0x12081400 0x100>;
+			clocks = <&cmu_core CLK_GOUT_SSS_ACLK>,
+				 <&cmu_core CLK_GOUT_SSS_PCLK>;
+			clock-names = "secss", "pclk";
+		};
+
 		pinctrl_hsi: pinctrl@13430000 {
 			compatible = "samsung,exynos850-pinctrl";
 			reg = <0x13430000 0x1000>;
@@ -350,7 +442,7 @@
 		};
 
 		rtc: rtc@11a30000 {
-			compatible = "samsung,s3c6410-rtc";
+			compatible = "samsung,exynos850-rtc", "samsung,s3c6410-rtc";
 			reg = <0x11a30000 0x100>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
@@ -360,7 +452,8 @@
 		};
 
 		mmc_0: mmc@12100000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos850-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			reg = <0x12100000 0x2000>;
 			interrupts = <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -373,7 +466,7 @@
 		};
 
 		i2c_0: i2c@13830000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13830000 0x100>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -386,7 +479,7 @@
 		};
 
 		i2c_1: i2c@13840000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13840000 0x100>;
 			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -399,7 +492,7 @@
 		};
 
 		i2c_2: i2c@13850000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13850000 0x100>;
 			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -412,7 +505,7 @@
 		};
 
 		i2c_3: i2c@13860000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13860000 0x100>;
 			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -425,7 +518,7 @@
 		};
 
 		i2c_4: i2c@13870000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13870000 0x100>;
 			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -439,7 +532,7 @@
 
 		/* I2C_5 (also called CAM_PMIC_I2C in TRM) */
 		i2c_5: i2c@13880000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13880000 0x100>;
 			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -453,7 +546,7 @@
 
 		/* I2C_6 (also called MOTOR_I2C in TRM) */
 		i2c_6: i2c@13890000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13890000 0x100>;
 			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -465,23 +558,100 @@
 			status = "disabled";
 		};
 
+		sysmmu_mfcmscl: sysmmu@12c50000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12c50000 0x9000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu";
+			clocks = <&cmu_mfcmscl CLK_GOUT_MFCMSCL_SYSMMU_CLK>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_dpu: sysmmu@130c0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x130c0000 0x9000>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu";
+			clocks = <&cmu_dpu CLK_GOUT_DPU_SMMU_CLK>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_is0: sysmmu@14550000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14550000 0x9000>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu";
+			clocks = <&cmu_is CLK_GOUT_IS_SYSMMU_IS0_CLK>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_is1: sysmmu@14570000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14570000 0x9000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu";
+			clocks = <&cmu_is CLK_GOUT_IS_SYSMMU_IS1_CLK>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_aud: sysmmu@14850000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14850000 0x9000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu";
+			clocks = <&cmu_aud CLK_GOUT_AUD_SYSMMU_CLK>;
+			#iommu-cells = <0>;
+		};
+
 		sysreg_peri: syscon@10020000 {
-			compatible = "samsung,exynos850-sysreg", "syscon";
+			compatible = "samsung,exynos850-peri-sysreg",
+				     "samsung,exynos850-sysreg", "syscon";
 			reg = <0x10020000 0x10000>;
 			clocks = <&cmu_peri CLK_GOUT_SYSREG_PERI_PCLK>;
 		};
 
 		sysreg_cmgp: syscon@11c20000 {
-			compatible = "samsung,exynos850-sysreg", "syscon";
+			compatible = "samsung,exynos850-cmgp-sysreg",
+				     "samsung,exynos850-sysreg", "syscon";
 			reg = <0x11c20000 0x10000>;
 			clocks = <&cmu_cmgp CLK_GOUT_SYSREG_CMGP_PCLK>;
 		};
 
+		usbdrd: usb@13600000 {
+			compatible = "samsung,exynos850-dwusb3";
+			ranges = <0x0 0x13600000 0x10000>;
+			clocks = <&cmu_hsi CLK_GOUT_USB_BUS_EARLY_CLK>,
+				 <&cmu_hsi CLK_GOUT_USB_REF_CLK>;
+			clock-names = "bus_early", "ref";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			usbdrd_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd_phy 0>;
+				phy-names = "usb2-phy";
+			};
+		};
+
+		usbdrd_phy: phy@135d0000 {
+			compatible = "samsung,exynos850-usbdrd-phy";
+			reg = <0x135d0000 0x100>;
+			clocks = <&cmu_hsi CLK_GOUT_USB_PHY_ACLK>,
+				 <&cmu_hsi CLK_GOUT_USB_PHY_REF_CLK>;
+			clock-names = "phy", "ref";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
 		usi_uart: usi@138200c0 {
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138200c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1010>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -507,7 +677,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138a00c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1020>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -517,7 +687,8 @@
 			status = "disabled";
 
 			hsi2c_0: i2c@138a0000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x138a0000 0xc0>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -535,7 +706,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138b00c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1030>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -545,7 +716,8 @@
 			status = "disabled";
 
 			hsi2c_1: i2c@138b0000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x138b0000 0xc0>;
 				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -563,7 +735,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138c00c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1040>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -573,7 +745,8 @@
 			status = "disabled";
 
 			hsi2c_2: i2c@138c0000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x138c0000 0xc0>;
 				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -591,7 +764,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x139400c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1050>;
-			samsung,mode = <USI_V2_SPI>;
+			samsung,mode = <USI_MODE_SPI>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -599,13 +772,31 @@
 				 <&cmu_peri CLK_GOUT_SPI0_IPCLK>;
 			clock-names = "pclk", "ipclk";
 			status = "disabled";
+
+			spi_0: spi@13940000 {
+				compatible = "samsung,exynos850-spi";
+				reg = <0x13940000 0x30>;
+				clocks = <&cmu_peri CLK_GOUT_SPI0_PCLK>,
+					 <&cmu_peri CLK_GOUT_SPI0_IPCLK>;
+				clock-names = "spi", "spi_busclk0";
+				dmas = <&pdma0 5>, <&pdma0 4>;
+				dma-names = "tx", "rx";
+				interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi0_pins>;
+				pinctrl-names = "default";
+				num-cs = <1>;
+				samsung,spi-src-clk = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		usi_cmgp0: usi@11d000c0 {
 			compatible = "samsung,exynos850-usi";
 			reg = <0x11d000c0 0x20>;
 			samsung,sysreg = <&sysreg_cmgp 0x2000>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -615,7 +806,8 @@
 			status = "disabled";
 
 			hsi2c_3: i2c@11d00000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x11d00000 0xc0>;
 				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -639,13 +831,31 @@
 				clock-names = "uart", "clk_uart_baud0";
 				status = "disabled";
 			};
+
+			spi_1: spi@11d00000 {
+				compatible = "samsung,exynos850-spi";
+				reg = <0x11d00000 0x30>;
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>;
+				clock-names = "spi", "spi_busclk0";
+				dmas = <&pdma0 12>, <&pdma0 13>;
+				dma-names = "tx", "rx";
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi1_pins>;
+				pinctrl-names = "default";
+				num-cs = <1>;
+				samsung,spi-src-clk = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		usi_cmgp1: usi@11d200c0 {
 			compatible = "samsung,exynos850-usi";
 			reg = <0x11d200c0 0x20>;
 			samsung,sysreg = <&sysreg_cmgp 0x2010>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -655,7 +865,8 @@
 			status = "disabled";
 
 			hsi2c_4: i2c@11d20000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x11d20000 0xc0>;
 				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -679,6 +890,24 @@
 				clock-names = "uart", "clk_uart_baud0";
 				status = "disabled";
 			};
+
+			spi_2: spi@11d20000 {
+				compatible = "samsung,exynos850-spi";
+				reg = <0x11d20000 0x30>;
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>;
+				clock-names = "spi", "spi_busclk0";
+				dmas = <&pdma0 14>, <&pdma0 15>;
+				dma-names = "tx", "rx";
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi2_pins>;
+				pinctrl-names = "default";
+				num-cs = <1>;
+				samsung,spi-src-clk = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/exynos/exynos8895-dreamlte.dts b/arch/arm64/boot/dts/exynos/exynos8895-dreamlte.dts
new file mode 100644
index 000000000000..61e064af3337
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos8895-dreamlte.dts
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S8 (dreamlte/SM-G950F) device tree source
+ *
+ * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+/dts-v1/;
+#include "exynos8895.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	model = "Samsung Galaxy S8 (SM-G950F)";
+	compatible = "samsung,dreamlte", "samsung,exynos8895";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer: framebuffer@cc000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xcc000000 (1440 * 2960 * 4)>;
+			width = <1440>;
+			height = <2960>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x3c800000>,
+		      <0x0 0xc0000000 0x40000000>,
+		      <0x8 0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@92000000 {
+			compatible = "ramoops";
+			reg = <0 0x92000000 0x8000>;
+			record-size = <0x4000>;
+			console-size = <0x4000>;
+		};
+
+		cont_splash_mem: framebuffer@cc000000 {
+			reg = <0 0xcc000000 (1440 * 2960 * 4)>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_power &key_voldown &key_volup &key_wink>;
+		pinctrl-names = "default";
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Typically used for Bixby. Map it as a camera button for now */
+		wink-key {
+			label = "Camera";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&gpa0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	/* TODO: Remove once PMIC is implemented  */
+	reg_placeholder: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg-placeholder";
+	};
+};
+
+&hsi2c_23 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+
+		/* TODO: Update once PMIC is implemented */
+		avdd-supply = <&reg_placeholder>;
+		vdd-supply = <&reg_placeholder>;
+
+		interrupt-parent = <&gpa1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ts_int>;
+		pinctrl-names = "default";
+	};
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&mmc {
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4 &sd2_cd>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpa1 5 GPIO_ACTIVE_LOW>;
+	clock-frequency = <800000000>;
+	disable-wp;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+
+	/* TODO: Add regulators once PMIC is implemented */
+
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+
+	status = "okay";
+};
+
+&pinctrl_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	key_wink: key-wink-pins {
+		samsung,pins = "gpa0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	sd2_cd: sd2-cd-pins {
+		samsung,pins = "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	ts_int: ts-int-pins {
+		samsung,pins = "gpa1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&usi9 {
+	samsung,mode = <USI_MODE_I2C0_1>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
new file mode 100644
index 000000000000..16903ce63a32
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
@@ -0,0 +1,1094 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung's Exynos 8895 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
+
+&pinctrl_abox {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph3: gph3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	bt_hostwake: bt-hostwake-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pcie_wake: pcie-wake-pins {
+		samsung,pins = "gpa3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpa4-4", "gpa4-3", "gpa4-2", "gpa4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	wlan_host_wake: wlan-host-wake-pins {
+		  samsung,pins = "gpa0-7";
+		  samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		  samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		  samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		  samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_busc {
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpb2-1", "gpb2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	speedy_bus: speedy-bus-pins {
+		samsung,pins = "gpb2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_fsys0 {
+	gpi0: gpi0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpi1: gpi1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gpi0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gpi0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_fsys1 {
+	gpj0: gpj0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj1: gpj1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	bt_btwake: bt-btwake-pins {
+		samsung,pins = "gpj1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_en: bt-en-pins {
+		samsung,pins = "gpj1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	cfg_wlanen: cfg-wlanen-pins {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpj0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpj0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpj0-3", "gpj0-4", "gpj0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+	};
+
+	/* For Drive strength swapping */
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd3: gpd3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe7: gpe7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpd1-1", "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpd1-3", "gpd1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpd1-5", "gpd1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpd1-7", "gpd1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpd2-3", "gpd2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpd3-1", "gpd3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpd3-3", "gpd3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c14_bus: hs-i2c14-bus-pins {
+		samsung,pins = "gpe6-3", "gpe6-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpd1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpd1-7", "gpd1-5", "gpd1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpd1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpd2-3", "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpd2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpd3-3", "gpd3-1", "gpd3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi5_cs: spi5-cs-pins {
+		samsung,pins = "gpd3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpd0-7", "gpd0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_dual: uart2-bus-dual-pins {
+		samsung,pins = "gpd1-1", "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus: uart3-bus-pins {
+		samsung,pins = "gpd1-7", "gpd1-6", "gpd1-5", "gpd1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpd1-5", "gpd1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus: uart4-bus-pins {
+		samsung,pins = "gpd2-3", "gpd2-2", "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus: uart5-bus-pins {
+		samsung,pins = "gpd3-3", "gpd3-2", "gpd3-1", "gpd3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpd3-1", "gpd3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe2: gpe2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe3: gpe3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe4: gpe4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe5: gpe5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe6: gpe6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hrm_irq: hrm-irq-pins {
+		samsung,pins = "gpe6-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpc2-3", "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpc2-5", "gpc2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpc2-7", "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c13_bus: hsi2c13-bus-pins {
+		samsung,pins = "gpe5-1", "gpe5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpe5-3", "gpe5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c15_bus: hsi2c15-bus-pins {
+		samsung,pins = "gpe1-1", "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c16_bus: hsi2c16-bus-pins {
+		samsung,pins = "gpe1-3", "gpe1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c17_bus: hsi2c17-bus-pins {
+		samsung,pins = "gpe1-5", "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c18_bus: hsi2c18-bus-pins {
+		samsung,pins = "gpe1-7", "gpe1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c19_bus: hsi2c19-bus-pins {
+		samsung,pins = "gpe2-1", "gpe2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c20_bus: hsi2c20-bus-pins {
+		samsung,pins = "gpe2-3", "gpe2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c21_bus: hsi2c21-bus-pins {
+		samsung,pins = "gpe2-5", "gpe2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c22_bus: hsi2c22-bus-pins {
+		samsung,pins = "gpe2-7", "gpe2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c23_bus: hsi2c23-bus-pins {
+		samsung,pins = "gpe3-1", "gpe3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c24_bus: hsi2c24-bus-pins {
+		samsung,pins = "gpe3-3", "gpe3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c25_bus: hsi2c25-bus-pins {
+		samsung,pins = "gpe3-5", "gpe3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c26_bus: hsi2c26-bus-pins {
+		samsung,pins = "gpe3-7", "gpe3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c27_bus: hsi2c27-bus-pins {
+		samsung,pins = "gpe4-1", "gpe4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c28_bus: hsi2c28-bus-pins {
+		samsung,pins = "gpe4-3", "gpe4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c29_bus: hsi2c29-bus-pins {
+		samsung,pins = "gpe4-5", "gpe4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c30_bus: hsi2c30-bus-pins {
+		samsung,pins = "gpe4-7", "gpe4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	hsi2c31_bus: hsi2c31-bus-pins {
+		samsung,pins = "gpe5-5", "gpe5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c32_bus: hsi2c32-bus-pins {
+		samsung,pins = "gpe5-7", "gpe5-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpc3-3", "gpc3-2", "gpc3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpc3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpc3-7", "gpc3-6", "gpc3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpc3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpe5-3", "gpe5-1", "gpe5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpe5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpe1-3", "gpe1-1", "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpe1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpe1-7", "gpe1-5", "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpe1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpe2-3", "gpe2-1", "gpe2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpe2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpe2-7", "gpe2-5", "gpe2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpe2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpe3-3", "gpe3-1", "gpe3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpe3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpe3-7", "gpe3-5", "gpe3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpe3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpe4-3", "gpe4-1", "gpe4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpe4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpe4-7", "gpe4-5", "gpe4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpe4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpe5-7", "gpe5-5", "gpe5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpe5-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart6_bus: uart6-bus-pins {
+		samsung,pins = "gpe5-3", "gpe5-2", "gpe5-1", "gpe5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_dual: uart6-bus-dual-pins {
+		samsung,pins = "gpe5-1", "gpe5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus: uart7-bus-pins {
+		samsung,pins = "gpe1-3", "gpe1-2", "gpe1-1", "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_dual: uart7-bus-dual-pins {
+		samsung,pins = "gpe1-1", "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus: uart8-bus-pins {
+		samsung,pins = "gpe1-7", "gpe1-6", "gpe1-5", "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_dual: uart8-bus-dual-pins {
+		samsung,pins = "gpe1-5", "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus: uart9-bus-pins {
+		samsung,pins = "gpe2-3", "gpe2-2", "gpe2-1", "gpe2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_dual: uart9-bus-dual-pins {
+		samsung,pins = "gpe2-1", "gpe2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus: uart10-bus-pins {
+		samsung,pins = "gpe2-7", "gpe2-6", "gpe2-5", "gpe2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_dual: uart10-bus-dual-pins {
+		samsung,pins = "gpe2-5", "gpe2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus: uart11-bus-pins {
+		samsung,pins = "gpe3-3", "gpe3-2", "gpe3-1", "gpe3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_dual: uart11-bus-dual-pins {
+		samsung,pins = "gpe3-1", "gpe3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus: uart12-bus-pins {
+		samsung,pins = "gpe3-7", "gpe3-6", "gpe3-5", "gpe3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_dual: uart12-bus-dual-pins {
+		samsung,pins = "gpe3-5", "gpe3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus: uart13-bus-pins {
+		samsung,pins = "gpe4-3", "gpe4-2", "gpe4-1", "gpe4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_dual: uart13-bus-dual-pins {
+		samsung,pins = "gpe4-1", "gpe4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus: uart14-bus-pins {
+		samsung,pins = "gpe4-7", "gpe4-6", "gpe4-5", "gpe4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_dual: uart14-bus-dual-pins {
+		samsung,pins = "gpe4-5", "gpe4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus: uart15-bus-pins {
+		samsung,pins = "gpe5-7", "gpe5-6", "gpe5-5", "gpe5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_dual: uart15-bus-dual-pins {
+		samsung,pins = "gpe5-5", "gpe5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_vts {
+	gph2: gph2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos8895.dtsi b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
new file mode 100644
index 000000000000..f92d2a8a20a2
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
@@ -0,0 +1,1374 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung's Exynos 8895 SoC device tree source
+ *
+ * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+#include <dt-bindings/clock/samsung,exynos8895.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos8895";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_abox;
+		pinctrl2 = &pinctrl_vts;
+		pinctrl3 = &pinctrl_fsys0;
+		pinctrl4 = &pinctrl_fsys1;
+		pinctrl5 = &pinctrl_busc;
+		pinctrl6 = &pinctrl_peric0;
+		pinctrl7 = &pinctrl_peric1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu4: cpu@0 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m2";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@1 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m2";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@2 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m2";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@3 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m2";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+
+		cpu0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	oscclk: osc-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	pmu-a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	pmu-mongoose-m2 {
+		compatible = "samsung,mongoose-pmu";
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu4>,
+				     <&cpu5>,
+				     <&cpu6>,
+				     <&cpu7>;
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+		cpu_suspend = <0xc4000001>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos8895-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		cmu_peris: clock-controller@10010000 {
+			compatible = "samsung,exynos8895-cmu-peris";
+			reg = <0x10010000 0x8000>;
+			#clock-cells = <1>;
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIS_BUS>;
+			clock-names = "oscclk", "bus";
+		};
+
+		timer@10040000 {
+			compatible = "samsung,exynos8895-mct",
+				     "samsung,exynos4210-mct";
+			reg = <0x10040000 0x800>;
+			clocks = <&oscclk>, <&cmu_peris CLK_GOUT_PERIS_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gic: interrupt-controller@10201000 {
+			compatible = "arm,gic-400";
+			reg = <0x10201000 0x1000>,
+			      <0x10202000 0x1000>,
+			      <0x10204000 0x2000>,
+			      <0x10206000 0x2000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+			#address-cells = <0>;
+			#size-cells = <1>;
+		};
+
+		cmu_peric0: clock-controller@10400000 {
+			compatible = "samsung,exynos8895-cmu-peric0";
+			reg = <0x10400000 0x8000>;
+			#clock-cells = <1>;
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_UART_DBG>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_USI00>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_USI01>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_USI02>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_USI03>;
+			clock-names = "oscclk", "bus", "uart", "usi0",
+				      "usi1", "usi2", "usi3";
+		};
+
+		syscon_peric0: syscon@10420000 {
+			compatible = "samsung,exynos8895-peric0-sysreg", "syscon";
+			reg = <0x10420000 0x2000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_SYSREG_PERIC0_PCLK>;
+		};
+
+		serial_0: serial@10430000 {
+			compatible = "samsung,exynos8895-uart";
+			reg = <0x10430000 0x100>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_UART_DBG_PCLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_UART_DBG_EXT_UCLK>;
+			clock-names = "uart", "clk_uart_baud0";
+			interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_bus>;
+			samsung,uart-fifosize = <256>;
+			status = "disabled";
+		};
+
+		usi0: usi@10440000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10440000 0x11000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_PCLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric0 0x1000>;
+			status = "disabled";
+
+			hsi2c_5: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c5_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_2: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart2_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_2: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi2_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_6: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c6_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi1: usi@10460000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10460000 0x11000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_PCLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric0 0x1004>;
+			status = "disabled";
+
+			hsi2c_7: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c5_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_3: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart3_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_3: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi3_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_8: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c8_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi2: usi@10480000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10480000 0x11000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_PCLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric0 0x1008>;
+			status = "disabled";
+
+			hsi2c_9: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c9_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_4: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart4_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_4: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi4_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_10: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c10_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi3: usi@104a0000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x104a0000 0x11000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_PCLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric0 0x100c>;
+			status = "disabled";
+
+			hsi2c_11: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c11_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_5: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart5_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_5: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi5_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_12: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c12_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		pinctrl_peric0: pinctrl@104d0000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x104d0000 0x1000>;
+			interrupts = <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_peric1: clock-controller@10800000 {
+			compatible = "samsung,exynos8895-cmu-peric1";
+			reg = <0x10800000 0x8000>;
+			#clock-cells = <1>;
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_SPEEDY2>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_SPI_CAM0>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_SPI_CAM1>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_UART_BT>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI04>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI05>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI06>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI07>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI08>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI09>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI10>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI11>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI12>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_USI13>;
+			clock-names = "oscclk", "bus", "speedy", "cam0",
+				      "cam1", "uart", "usi4", "usi5",
+				      "usi6", "usi7", "usi8", "usi9",
+				      "usi10", "usi11", "usi12", "usi13";
+		};
+
+		syscon_peric1: syscon@10820000 {
+			compatible = "samsung,exynos8895-peric1-sysreg", "syscon";
+			reg = <0x10820000 0x2000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_SYSREG_PERIC1_PCLK>;
+		};
+
+		serial_1: serial@10830000 {
+			compatible = "samsung,exynos8895-uart";
+			reg = <0x10830000 0x100>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_UART_BT_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_UART_BT_EXT_UCLK>;
+			clock-names = "uart", "clk_uart_baud0";
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_bus>;
+			samsung,uart-fifosize = <256>;
+			status = "disabled";
+		};
+
+		usi4: usi@10840000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10840000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1008>;
+			status = "disabled";
+
+			hsi2c_13: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c13_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_6: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart6_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_6: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi6_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_14: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c14_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi5: usi@10860000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10860000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x100c>;
+			status = "disabled";
+
+			hsi2c_15: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c15_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_7: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart7_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_7: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi7_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_16: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c16_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi6: usi@10880000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10880000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1010>;
+			status = "disabled";
+
+			hsi2c_17: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c17_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_8: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart8_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_8: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi8_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_18: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c18_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi7: usi@108a0000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x108a0000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1014>;
+			status = "disabled";
+
+			hsi2c_19: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c19_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_9: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart9_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_9: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi9_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_20: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c20_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi8: usi@108c0000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x108c0000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1018>;
+			status = "disabled";
+
+			hsi2c_21: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c21_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_10: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart10_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_10: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi10_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_22: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c22_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi9: usi@108e0000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x108e0000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x101c>;
+			status = "disabled";
+
+			hsi2c_23: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c23_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_11: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart11_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_11: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi11_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_24: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c24_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi10: usi@10900000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10900000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1020>;
+			status = "disabled";
+
+			hsi2c_25: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c25_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_12: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart12_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_12: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi12_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_26: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c26_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi11: usi@10920000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10920000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1024>;
+			status = "disabled";
+
+			hsi2c_27: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c27_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_13: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart13_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_13: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi13_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_28: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c28_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi12: usi@10940000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10940000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1028>;
+			status = "disabled";
+
+			hsi2c_29: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c29_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_14: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart14_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_14: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi14_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_30: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c30_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi13: usi@10960000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10960000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x102c>;
+			status = "disabled";
+
+			hsi2c_31: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c31_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_15: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart15_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_15: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi15_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_32: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c32_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		pinctrl_peric1: pinctrl@10980000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x10980000 0x1000>;
+			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hsi2c_1: i2c@10990000 {
+			compatible = "samsung,exynos8895-hsi2c";
+			reg = <0x10990000 0x1000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_HSI2C_CAM0_IPCLK>;
+			clock-names = "hsi2c";
+			interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&hsi2c1_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		hsi2c_2: i2c@109a0000 {
+			compatible = "samsung,exynos8895-hsi2c";
+			reg = <0x109a0000 0x1000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_HSI2C_CAM1_IPCLK>;
+			clock-names = "hsi2c";
+			interrupts = <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&hsi2c2_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		hsi2c_3: i2c@109b0000 {
+			compatible = "samsung,exynos8895-hsi2c";
+			reg = <0x109b0000 0x1000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_HSI2C_CAM2_IPCLK>;
+			clock-names = "hsi2c";
+			interrupts = <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&hsi2c3_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		hsi2c_4: i2c@109c0000 {
+			compatible = "samsung,exynos8895-hsi2c";
+			reg = <0x109c0000 0x1000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_HSI2C_CAM3_IPCLK>;
+			clock-names = "hsi2c";
+			interrupts = <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&hsi2c4_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		spi_0: spi@109d0000 {
+			compatible = "samsung,exynos8895-spi",
+				     "samsung,exynos850-spi";
+			reg = <0x109d0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_SPI_CAM0_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_SPI_CAM0_SPI_EXT_CLK>;
+			clock-names = "spi", "spi_busclk0";
+			interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi0_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		spi_1: spi@109e0000 {
+			compatible = "samsung,exynos8895-spi",
+				     "samsung,exynos850-spi";
+			reg = <0x109e0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_SPI_CAM1_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_SPI_CAM1_SPI_EXT_CLK>;
+			clock-names = "spi", "spi_busclk0";
+			interrupts = <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi1_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		cmu_fsys0: clock-controller@11000000 {
+			compatible = "samsung,exynos8895-cmu-fsys0";
+			reg = <0x11000000 0x8000>;
+			#clock-cells = <1>;
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_FSYS0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_FSYS0_DPGTC>,
+				 <&cmu_top CLK_DOUT_CMU_FSYS0_MMC_EMBD>,
+				 <&cmu_top CLK_DOUT_CMU_FSYS0_UFS_EMBD>,
+				 <&cmu_top CLK_DOUT_CMU_FSYS0_USBDRD30>;
+			clock-names = "oscclk", "bus", "dpgtc", "mmc",
+				      "ufs", "usbdrd30";
+		};
+
+		syscon_fsys0: syscon@11020000 {
+			compatible = "samsung,exynos8895-fsys0-sysreg", "syscon";
+			reg = <0x11020000 0x2000>;
+			clocks = <&cmu_fsys0 CLK_GOUT_FSYS0_SYSREG_FSYS0_PCLK>;
+		};
+
+		pinctrl_fsys0: pinctrl@11050000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x11050000 0x1000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_fsys1: clock-controller@11400000 {
+			compatible = "samsung,exynos8895-cmu-fsys1";
+			reg = <0x11400000 0x8000>;
+			#clock-cells = <1>;
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_FSYS1_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_FSYS1_PCIE>,
+				 <&cmu_top CLK_DOUT_CMU_FSYS1_UFS_CARD>,
+				 <&cmu_top CLK_DOUT_CMU_FSYS1_MMC_CARD>;
+			clock-names = "oscclk", "bus", "pcie", "ufs", "mmc";
+		};
+
+		syscon_fsys1: syscon@11420000 {
+			compatible = "samsung,exynos8895-fsys1-sysreg", "syscon";
+			reg = <0x11420000 0x2000>;
+			clocks = <&cmu_fsys1 CLK_GOUT_FSYS1_SYSREG_FSYS1_PCLK>;
+		};
+
+		pinctrl_fsys1: pinctrl@11430000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x11430000 0x1000>;
+			interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		mmc: mmc@11500000 {
+			compatible = "samsung,exynos8895-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
+			reg = <0x11500000 0x2000>;
+			assigned-clocks = <&cmu_top CLK_MOUT_CMU_FSYS1_MMC_CARD>;
+			assigned-clock-parents = <&cmu_top CLK_FOUT_SHARED4_PLL>;
+			clocks = <&cmu_fsys1 CLK_GOUT_FSYS1_MMC_CARD_I_ACLK>,
+				 <&cmu_fsys1 CLK_GOUT_FSYS1_MMC_CARD_SDCLKIN>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <64>;
+			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pinctrl_abox: pinctrl@13e60000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x13e60000 0x1000>;
+		};
+
+		pinctrl_vts: pinctrl@14080000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x14080000 0x1000>;
+		};
+
+		pinctrl_busc: pinctrl@15a30000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x15a30000 0x1000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_top: clock-controller@15a80000 {
+			compatible = "samsung,exynos8895-cmu-top";
+			reg = <0x15a80000 0x8000>;
+			#clock-cells = <1>;
+			clocks = <&oscclk>;
+			clock-names = "oscclk";
+		};
+
+		pmu_system_controller: system-controller@16480000 {
+			compatible = "samsung,exynos8895-pmu",
+				     "samsung,exynos7-pmu", "syscon";
+			reg = <0x16480000 0x10000>;
+		};
+
+		pinctrl_alive: pinctrl@164b0000 {
+			compatible = "samsung,exynos8895-pinctrl";
+			reg = <0x164b0000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos8895-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		/*
+		 * Non-updatable, broken stock Samsung bootloader does not
+		 * configure CNTFRQ_EL0
+		 */
+		clock-frequency = <26000000>;
+	};
+};
+
+#include "exynos8895-pinctrl.dtsi"
+#include "arm/samsung/exynos-syscon-restart.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi
new file mode 100644
index 000000000000..88091bf09e4e
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi
@@ -0,0 +1,503 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung's Exynos 9810 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2024 Markuss Broks <markuss.broks@gmail.com>
+ * Copyright (c) 2024 Maksym Holovach <nergzd@nergzd723.xyz>
+ */
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	etc1: etc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_aud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_chub {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_cmgp {
+	gpm0: gpm0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm1: gpm1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm2: gpm2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm3: gpm3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm4: gpm4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm5: gpm5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm6: gpm6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm7: gpm7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm10: gpm10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm11: gpm11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm12: gpm12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm13: gpm13-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm14: gpm14-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm15: gpm15-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm16: gpm16-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm17: gpm17-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm40: gpm40-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm41: gpm41-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm42: gpm42-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm43: gpm43-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&pinctrl_fsys0 {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_fsys1 {
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_vts {
+	gpt0: gpt0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos9810-starlte.dts b/arch/arm64/boot/dts/exynos/exynos9810-starlte.dts
new file mode 100644
index 000000000000..fc0ddfee4cd6
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos9810-starlte.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S9 (starlte/SM-G960F) device tree source
+ *
+ * Copyright (c) 2024 Markuss Broks <markuss.broks@gmail.com>
+ * Copyright (c) 2024 Maksym Holovach <nergzd@nergzd723.xyz>
+ */
+
+/dts-v1/;
+#include "exynos9810.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Samsung Galaxy S9 (SM-G960F)";
+	compatible = "samsung,starlte", "samsung,exynos9810";
+	chassis-type = "handset";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@cc000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0xcc000000 (1440 * 2960 * 4)>;
+			width = <1440>;
+			height = <2960>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_power &key_voldown &key_volup &key_wink>;
+		pinctrl-names = "default";
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		/* In stock firmware used for assistant. Map it as a camera button for now */
+		wink-key {
+			label = "Camera";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&gpa0 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x3c800000>,
+		      <0x0 0xc0000000 0x20000000>,
+		      <0x0 0xe1900000 0x1e700000>,
+		      <0x8 0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@cc000000 {
+			reg = <0x0 0xcc000000 (1440 * 2960 * 4)>;
+			no-map;
+		};
+	};
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_wink: key-wink-pins {
+		samsung,pins = "gpa0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos9810.dtsi b/arch/arm64/boot/dts/exynos/exynos9810.dtsi
new file mode 100644
index 000000000000..01eba31f7ca3
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos9810.dtsi
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Exynos 9810 SoC device tree source
+ *
+ * Copyright (c) 2024 Markuss Broks <markuss.broks@gmail.com>
+ * Copyright (c) 2024 Maksym Holovach <nergzd@nergzd723.xyz>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos9810";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_chub;
+		pinctrl3 = &pinctrl_cmgp;
+		pinctrl4 = &pinctrl_fsys0;
+		pinctrl5 = &pinctrl_fsys1;
+		pinctrl6 = &pinctrl_peric0;
+		pinctrl7 = &pinctrl_peric1;
+		pinctrl8 = &pinctrl_vts;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m3";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m3";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m3";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m3";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	oscclk: osc-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	pmu-mongoose-m3 {
+		compatible = "samsung,mongoose-pmu";
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu4>,
+				     <&cpu5>,
+				     <&cpu6>,
+				     <&cpu7>;
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+		cpu_suspend = <0xc4000001>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos9810-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		gic: interrupt-controller@10101000 {
+			compatible = "arm,gic-400";
+			reg = <0x10101000 0x1000>,
+			      <0x10102000 0x1000>,
+			      <0x10104000 0x2000>,
+			      <0x10106000 0x2000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+			#address-cells = <0>;
+			#size-cells = <1>;
+		};
+
+		pinctrl_peric0: pinctrl@10430000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x10430000 0x1000>;
+			interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peric1: pinctrl@10830000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x10830000 0x1000>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys0: pinctrl@11050000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x11050000 0x1000>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys1: pinctrl@11430000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x11430000 0x1000>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_vts: pinctrl@13880000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x13880000 0x1000>;
+		};
+
+		pinctrl_chub: pinctrl@13a80000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x13a80000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_alive: pinctrl@14050000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x14050000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos9810-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pmu_system_controller: system-controller@14060000 {
+			compatible = "samsung,exynos9810-pmu",
+				     "samsung,exynos7-pmu", "syscon";
+			reg = <0x14060000 0x10000>;
+		};
+
+		pinctrl_cmgp: pinctrl@14220000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x14220000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos9810-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pinctrl_aud: pinctrl@17c60000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x17c60000 0x1000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		/*
+		 * Non-updatable, broken stock Samsung bootloader does not
+		 * configure CNTFRQ_EL0
+		 */
+		clock-frequency = <26000000>;
+	};
+};
+
+#include "exynos9810-pinctrl.dtsi"
+#include "arm/samsung/exynos-syscon-restart.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos990-c1s.dts b/arch/arm64/boot/dts/exynos/exynos990-c1s.dts
new file mode 100644
index 000000000000..9f0ad4f9673a
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-c1s.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy Note20 5G (c1s/SM-N981B) device tree source
+ *
+ * Copyright (c) 2024, Igor Belwon <igor.belwon@mentallysanemainliners.org>
+ */
+
+/dts-v1/;
+#include "exynos990.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy Note20";
+	compatible = "samsung,c1s", "samsung,exynos990";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@f1000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xf1000000 0 (1080 * 2400 * 4)>;
+			width = <1080>;
+			height = <2400>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x3ab00000>,
+		      /* Memory hole */
+		      <0x0 0xc1200000 0x0 0x1ee00000>,
+		      /* Memory hole */
+		      <0x0 0xe1900000 0x0 0x1e700000>,
+		      /* Memory hole - last block */
+		      <0x8 0x80000000 0x1 0x7ec00000>;
+	};
+
+	/* TODO: Remove this once PMIC is implemented */
+	reg_dummy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy_reg";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cont_splash_mem: framebuffer@f1000000 {
+			reg = <0 0xf1000000 0 0x13c6800>;
+			no-map;
+		};
+
+		abox_reserved: audio@f7fb0000 {
+			reg = <0 0xf7fb0000 0 0x2a50000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+		pinctrl-names = "default";
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&usbdrd {
+	status = "okay";
+	vdd10-supply = <&reg_dummy>;
+	vdd33-supply = <&reg_dummy>;
+};
+
+&usbdrd_phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos990-pinctrl.dtsi
new file mode 100644
index 000000000000..a03d36458d76
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-pinctrl.dtsi
@@ -0,0 +1,2195 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Exynos 990 pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2024, Igor Belwon <igor.belwon@mentallysanemainliners.org>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	speedy_bus: speedy-bus-pins {
+		samsung,pins = "gpq0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	speedy1_bus: speedy1-bus-pins {
+		samsung,pins = "gpq0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* UART1 is also referred to as UART_BT in downstream. */
+	uart1_bus_single: uart1-bus-pins {
+		samsung,pins = "gpq0-3", "gpq0-2", "gpq0-1", "gpq0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	uart1_rxd_pull: uart1-bus-rxd-pins {
+		samsung,pins = "gpq0-0";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	uart1_bus_rts: uart1-bus-rts-pins {
+		samsung,pins = "gpq0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_bus_tx_input: uart1-bus-tx-input-pins {
+		samsung,pins = "gpq0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	uart1_bus_tx_dat: uart1-bus-tx-dat-pins {
+		samsung,pins = "gpq0-1";
+	};
+
+	uart1_bus_tx_con: uart1-bus-tx-con-pins {
+		samsung,pins = "gpq0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+	};
+
+	wlan_host_wake: wlan-host-wake-pins {
+		samsung,pins = "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_cmgp {
+	gpm0: gpm0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm1: gpm1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm2: gpm2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm3: gpm3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm4: gpm4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm5: gpm5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm6: gpm6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm7: gpm7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm8: gpm8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm9: gpm9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm10: gpm10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm11: gpm11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm12: gpm12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm13: gpm13-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm14: gpm14-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm15: gpm15-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm16: gpm16-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm17: gpm17-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm18: gpm18-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm19: gpm19-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm20: gpm20-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm21: gpm21-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm22: gpm22-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm23: gpm23-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm24: gpm24-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm25: gpm25-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm26: gpm26-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm27: gpm27-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm28: gpm28-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm29: gpm29-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm30: gpm30-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm31: gpm31-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm32: gpm32-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm33: gpm33-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	hsi2c38_bus: hsi2c38-bus-pins {
+		samsung,pins = "gpm0-0", "gpm1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c39_bus: hsi2c39-bus-pins {
+		samsung,pins = "gpm2-0", "gpm3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c40_bus: hsi2c40-bus-pins {
+		samsung,pins = "gpm4-0", "gpm5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c41_bus: hsi2c41-bus-pins {
+		samsung,pins = "gpm6-0", "gpm7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c42_bus: hsi2c42-bus-pins {
+		samsung,pins = "gpm8-0", "gpm9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c43_bus: hsi2c43-bus-pins {
+		samsung,pins = "gpm10-0", "gpm11-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c44_bus: hsi2c44-bus-pins {
+		samsung,pins = "gpm12-0", "gpm13-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c45_bus: hsi2c45-bus-pins {
+		samsung,pins = "gpm14-0", "gpm15-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi19_bus: spi19-bus-pins {
+		samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi19_cs: spi19-cs-pins {
+		samsung,pins = "gpm3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi19_cs_func: spi19-cs-func-pins {
+		samsung,pins = "gpm3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi20_bus: spi20-bus-pins {
+		samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi20_cs: spi20-cs-pins {
+		samsung,pins = "gpm7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi20_cs_func: spi20-cs-func-pins {
+		samsung,pins = "gpm7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi21_bus: spi21-bus-pins {
+		samsung,pins = "gpm8-0", "gpm9-0", "gpm10-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi21_cs: spi21-cs-pins {
+		samsung,pins = "gpm11-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi21_cs_func: spi21-cs-func-pins {
+		samsung,pins = "gpm11-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi22_bus: spi22-bus-pins {
+		samsung,pins = "gpm12-0", "gpm13-0", "gpm14-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi22_cs: spi22-cs-pins {
+		samsung,pins = "gpm15-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi22_cs_func: spi22-cs-func-pins {
+		samsung,pins = "gpm15-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart21_bus_single: uart21-bus-pins {
+		samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart21_bus_dual: uart21-bus-dual-pins {
+		samsung,pins = "gpm0-0", "gpm1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart22_bus_single: uart22-bus-pins {
+		samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart22_bus_dual: uart22-bus-dual-pins {
+		samsung,pins = "gpm4-0", "gpm5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart23_bus_single: uart23-bus-pins {
+		samsung,pins = "gpm8-0", "gpm9-0", "gpm10-0", "gpm11-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart23_bus_dual: uart23-bus-dual-pins {
+		samsung,pins = "gpm8-0", "gpm9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart24_bus_single: uart24-bus-pins {
+		samsung,pins = "gpm12-0", "gpm13-0", "gpm14-0", "gpm15-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart24_bus_dual: uart24-bus-dual-pins {
+		samsung,pins = "gpm12-0", "gpm13-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_hsi1 {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcie0_clkreq: pcie0-clkreq-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2_5>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie0_perst: pcie0-perst-pins {
+		samsung,pins = "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2_5>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie1_clkreq: pcie1-clkreq-pins {
+		samsung,pins = "gpf0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2_5>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie1_perst: pcie1-perst-pins {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2_5>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gpf2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gpf2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV3>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpf1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2_5>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpf1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2_5>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpf1-3", "gpf1-4", "gpf1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2_5>;
+	};
+
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV1>;
+	};
+
+	sd2_clk_fast_slew_rate_1_5x: sd2-clk-fast-slew-rate-1-5x-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV1_5>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
+	};
+
+	sd2_clk_fast_slew_rate_2_5x: sd2-clk-fast-slew-rate-2-5x-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2_5>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fas-slew-rate-3x-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV3>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV4>;
+	};
+
+	sd2_pins_as_pdn: sd2-pins-as-pdn-pins {
+		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3", "gpf1-4", "gpf1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&pinctrl_hsi2 {
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcie2_clkreq: pcie2-clkreq-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie2_perst: pcie2-perst-pins {
+		samsung,pins = "gpf3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c26_bus: hsi2c26-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c27_bus: hsi2c27-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	hsi2c28_bus: hsi2c28-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c29_bus: hsi2c29-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c30_bus: hsi2c30-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c31_bus: hsi2c31-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-1", "gpp0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp0-6", "gpp0-5", "gpp0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-1", "gpp1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp1-6", "gpp1-5", "gpp1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-1", "gpp2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi4_fp_inactive: spi4-fp-inactive-pins {
+		samsung,pins = "gpp2-3", "gpp2-2", "gpp2-1", "gpp2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi4_fp_cs_func_high: spi4-fp-cs-func-high-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-5", "gpp2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi5_cs: spi5-cs-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-1", "gpp3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-5", "gpp3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-1", "gpp4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi15_cs_func: spi15-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp4-6", "gpp4-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	uart2_bus_single: uart2-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_dual: uart2-bus-dual-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_single: uart3-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_single: uart4-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_single: uart5-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_single: uart6-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_dual: uart6-bus-dual-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_single: uart7-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_dual: uart7-bus-dual-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_single: uart15-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_dual: uart15-bus-dual-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart16_bus_single: uart16-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart16_bus_dual: uart16-bus-dual-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart17_bus_single: uart17-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart17_bus_dual: uart17-bus-dual-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	aud_i2s0_bus: aud-i2s0-bus-pins {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s0_idle: aud-i2s0-idle-pins {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s1_bus: aud-i2s1-bus-pins {
+		samsung,pins = "gpb0-4", "gpb0-5", "gpb0-6", "gpb0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s1_idle: aud-i2s1-idle-pins {
+		samsung,pins = "gpb0-4", "gpb0-5", "gpb0-6", "gpb0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s2_bus: aud-i2s2-bus-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s2_idle: aud-i2s2-idle-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s3_bus: aud-i2s3-bus-pins {
+		samsung,pins = "gpb1-4", "gpb1-5", "gpb1-6", "gpb1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s3_idle: aud-i2s3-idle-pins {
+		samsung,pins = "gpb1-4", "gpb1-5", "gpb1-6", "gpb1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s4_bus: aud-i2s4-bus-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s4_pci: aud-i2s4-pci-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s4_idle: aud-i2s4-idle-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s5_bus: aud-i2s5-bus-pins {
+		samsung,pins = "gpb2-4", "gpb2-5", "gpb2-6", "gpb2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s5_idle: aud-i2s5-idle-pins {
+		samsung,pins = "gpb2-4", "gpb2-5", "gpb2-6", "gpb2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_dsd_bus: aud-dsd-bus-pins {
+		samsung,pins = "gpb2-4", "gpb2-5", "gpb2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_dsd_idle: aud-dsd-idle-pins {
+		samsung,pins = "gpb2-4", "gpb2-5", "gpb2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	cfg_wlanen: cfg-wlanen-pins {
+		samsung,pins = "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	cnss_wlan_en_active: cnss-wlan-en-active-pins {
+		samsung,pins = "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	cnss_wlan_en_sleep: cnss-wlan-en-sleep-pins {
+		samsung,pins = "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	decon_f_te_on: decon-f-te-on-pins {
+		samsung,pins = "gpc0-4";
+		samsung,pin-function = <0xf>;
+	};
+
+	decon_f_te_off: decon-f-te-off-pins {
+		samsung,pins = "gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+	};
+
+	decon_s_te_on: decon-s-te-on-pins {
+		samsung,pins = "gpc0-5";
+		samsung,pin-function = <0xf>;
+	};
+
+	decon_s_te_off: decon-s-te-off-pins {
+		samsung,pins = "gpc0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+	};
+
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c13_bus: hsi2c13-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c15_bus: hsi2c15-bus-pins {
+		samsung,pins = "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c16_bus: hsi2c16-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c17_bus: hsi2c17-bus-pins {
+		samsung,pins = "gpp6-2", "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c18_bus: hsi2c18-bus-pins {
+		samsung,pins = "gpp6-4", "gpp6-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c19_bus: hsi2c19-bus-pins {
+		samsung,pins = "gpp6-6", "gpp6-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c20_bus: hsi2c20-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c21_bus: hsi2c21-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c22_bus: hsi2c22-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c23_bus: hsi2c23-bus-pins {
+		samsung,pins = "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c24_bus: hsi2c24-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c25_bus: hsi2c25-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c32_bus: hsi2c32-bus-pins {
+		samsung,pins = "gpp8-4", "gpp8-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c33_bus: hsi2c33-bus-pins {
+		samsung,pins = "gpp8-6", "gpp8-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c34_bus: hsi2c34-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c35_bus: hsi2c35-bus-pins {
+		samsung,pins = "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c36_bus: hsi2c36-bus-pins {
+		samsung,pins = "gpp9-4", "gpp9-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hsi2c37_bus: hsi2c37-bus-pins {
+		samsung,pins = "gpp9-6", "gpp9-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk0_out: sensor-mclk0-out-pins {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk1_out: sensor-mclk1-out-pins {
+		samsung,pins = "gpg1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk2_out: sensor-mclk2-out-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk3_out: sensor-mclk3-out-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk4_out: sensor-mclk4-out-pins {
+		samsung,pins = "gpc0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk5_out: sensor-mclk5-out-pins {
+		samsung,pins = "gpg1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk0_fn: sensor-mclk0-fn-pins {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk1_fn: sensor-mclk1-fn-pins {
+		samsung,pins = "gpg1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk2_fn: sensor-mclk2-fn-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk3_fn: sensor-mclk3-fn-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk4_fn: sensor-mclk4-fn-pins {
+		samsung,pins = "gpc0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sensor_mclk5_fn: sensor-mclk5-fn-pins {
+		samsung,pins = "gpg1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-1", "gpp5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp5-6", "gpp5-5", "gpp5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp6-2", "gpp6-1", "gpp6-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp6-6", "gpp6-5", "gpp6-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp6-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp6-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp7-6", "gpp7-5", "gpp7-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-1", "gpp8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi16_bus: spi16-bus-pins {
+		samsung,pins = "gpp8-6", "gpp8-5", "gpp8-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi16_cs: spi16-cs-pins {
+		samsung,pins = "gpp8-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi16_cs_func: spi16-cs-func-pins {
+		samsung,pins = "gpp8-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi17_bus: spi17-bus-pins {
+		samsung,pins = "gpp9-2", "gpp9-1", "gpp9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi17_cs: spi17-cs-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi17_cs_func: spi17-cs-func-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi18_bus: spi18-bus-pins {
+		samsung,pins = "gpp9-6", "gpp9-5", "gpp9-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi18_cs: spi18-cs-pins {
+		samsung,pins = "gpp9-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi18_cs_func: spi18-cs-func-pins {
+		samsung,pins = "gpp9-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart8_bus_single: uart8-bus-pins {
+		samsung,pins = "gpp5-3", "gpp5-2", "gpp5-1", "gpp5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_dual: uart8-bus-dual-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_single: uart9-bus-pins {
+		samsung,pins = "gpp5-7", "gpp5-6", "gpp5-5", "gpp5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_dual: uart9-bus-dual-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_single: uart10-bus-pins {
+		samsung,pins = "gpp6-3", "gpp6-2", "gpp6-1", "gpp6-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_dual: uart10-bus-dual-pins {
+		samsung,pins = "gpp6-0", "gpp6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_single: uart11-bus-pins {
+		samsung,pins = "gpp6-7", "gpp6-6", "gpp6-5", "gpp6-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_dual: uart11-bus-dual-pins {
+		samsung,pins = "gpp6-4", "gpp6-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_single: uart12-bus-pins {
+		samsung,pins = "gpp7-3", "gpp7-2", "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_dual: uart12-bus-dual-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_single: uart13-bus-pins {
+		samsung,pins = "gpp7-7", "gpp7-6", "gpp7-5", "gpp7-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_dual: uart13-bus-dual-pins {
+		samsung,pins = "gpp7-4", "gpp7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_single: uart14-bus-pins {
+		samsung,pins = "gpp8-3", "gpp8-2", "gpp8-1", "gpp8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_dual: uart14-bus-dual-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart18_bus_single: uart18-bus-pins {
+		samsung,pins = "gpp8-7", "gpp8-6", "gpp8-5", "gpp8-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart18_bus_dual: uart18-bus-dual-pins {
+		samsung,pins = "gpp8-4", "gpp8-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart19_bus_single: uart19-bus-pins {
+		samsung,pins = "gpp9-3", "gpp9-2", "gpp9-1", "gpp9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart19_bus_dual: uart19-bus-dual-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart20_bus_single: uart20-bus-pins {
+		samsung,pins = "gpp9-7", "gpp9-6", "gpp9-5", "gpp9-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart20_bus_dual: uart20-bus-dual-pins {
+		samsung,pins = "gpp9-4", "gpp9-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_vts {
+	gpv0: gpv0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	amic_pdm: amic-pdm-pins {
+		samsung,pins = "gpv0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk: dmic-bus-clk-pins {
+		samsung,pins = "gpv0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk_idle: dmic-bus-clk-idle-pins {
+		samsung,pins = "gpv0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk1: dmic-bus-clk1-pins {
+		samsung,pins = "gpv0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk1_idle: dmic-bus-clk1-idle-pins {
+		samsung,pins = "gpv0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk2: dmic-bus-clk2-pins {
+		samsung,pins = "gpv0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk2_idle: dmic-bus-clk2-idle-pins {
+		samsung,pins = "gpv0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm: dmic-pdm-pins {
+		samsung,pins = "gpv0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm_idle: dmic-pdm-idle-pins {
+		samsung,pins = "gpv0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm1_bus: dmic-pdm1-bus-pins {
+		samsung,pins = "gpv0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm1_idle: dmic-pdm1-idle-pins {
+		samsung,pins = "gpv0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm2_bus: dmic-pdm2-bus-pins {
+		samsung,pins = "gpv0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm2_idle: dmic-pdm2-idle-pins {
+		samsung,pins = "gpv0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990-r8s.dts b/arch/arm64/boot/dts/exynos/exynos990-r8s.dts
new file mode 100644
index 000000000000..55342db61979
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-r8s.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S20 FE (r8s/SM-G780F) device tree source
+ *
+ * Copyright (c) 2024, Denzeel Oliva <wachiturroxd150@gmail.com>
+ */
+
+/dts-v1/;
+#include "exynos990.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy S20 FE";
+	compatible = "samsung,r8s", "samsung,exynos990";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@f1000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xf1000000 0 (1080 * 2400 * 4)>;
+			width = <1080>;
+			height = <2400>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x3ab00000>,
+		      /* Memory hole */
+		      <0x0 0xc1200000 0x0 0x1ee00000>,
+		      /* Memory hole */
+		      <0x0 0xe1900000 0x0 0x1e700000>,
+		      /* Memory hole - last block */
+		      <0x8 0x80000000 0x0 0xc0000000>;
+	};
+
+	/* TODO: Remove this once PMIC is implemented */
+	reg_dummy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy_reg";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cont_splash_mem: framebuffer@f1000000 {
+			reg = <0 0xf1000000 0 0x13c6800>;
+			no-map;
+		};
+
+		abox_reserved: audio@f7fb0000 {
+			reg = <0 0xf7fb0000 0 0x2a50000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+		pinctrl-names = "default";
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&usbdrd {
+	status = "okay";
+	vdd10-supply = <&reg_dummy>;
+	vdd33-supply = <&reg_dummy>;
+};
+
+&usbdrd_phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi b/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi
new file mode 100644
index 000000000000..7b97220cccb7
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S20 Series device tree source
+ *
+ * Copyright (c) 2024, Umer Uddin <umer.uddin@mentallysanemainliners.org>
+ */
+
+/dts-v1/;
+#include "exynos990.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@f1000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xf1000000 0 (1440 * 3200 * 4)>;
+			width = <1440>;
+			height = <3200>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	/* TODO: Remove this once PMIC is implemented */
+	reg_dummy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy_reg";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cont_splash_mem: framebuffer@f1000000 {
+			reg = <0 0xf1000000 0 0x1194000>;
+			no-map;
+		};
+
+		abox_reserved: audio@f7fb0000 {
+			reg = <0 0xf7fb0000 0 0x2a50000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+		pinctrl-names = "default";
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&usbdrd {
+	status = "okay";
+	vdd10-supply = <&reg_dummy>;
+	vdd33-supply = <&reg_dummy>;
+};
+
+&usbdrd_phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990-x1s.dts b/arch/arm64/boot/dts/exynos/exynos990-x1s.dts
new file mode 100644
index 000000000000..1ae881015e0c
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-x1s.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S20 5G (x1s/SM-G981B) device tree source
+ *
+ * Copyright (c) 2024, Umer Uddin <umer.uddin@mentallysanemainliners.org>
+ */
+
+/dts-v1/;
+#include "exynos990-x1s-common.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "Samsung Galaxy S20 5G";
+	compatible = "samsung,x1s", "samsung,exynos990";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x3ab00000>,
+		      /* Memory hole */
+		      <0x0 0xc1200000 0x0 0x1ee00000>,
+		      /* Memory hole */
+		      <0x0 0xe1900000 0x0 0x1e700000>,
+		      /* Memory hole */
+		      <0x8 0x80000000 0x2 0x7e800000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990-x1slte.dts b/arch/arm64/boot/dts/exynos/exynos990-x1slte.dts
new file mode 100644
index 000000000000..d3720996ba93
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-x1slte.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S20 (x1slte/SM-G980F) device tree source
+ *
+ * Copyright (c) 2024, Umer Uddin <umer.uddin@mentallysanemainliners.org>
+ */
+
+/dts-v1/;
+#include "exynos990-x1s-common.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "Samsung Galaxy S20";
+	compatible = "samsung,x1slte", "samsung,exynos990";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x3ab00000>,
+		      /* Memory hole */
+		      <0x0 0xc1200000 0x0 0x1ee00000>,
+		      /* Memory hole */
+		      <0x0 0xe1900000 0x0 0x1e700000>,
+		      /* Memory hole */
+		      <0x8 0x80000000 0x1 0x7ec00000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990.dtsi b/arch/arm64/boot/dts/exynos/exynos990.dtsi
new file mode 100644
index 000000000000..7179109c49d0
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990.dtsi
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Exynos 990 SoC device tree source
+ *
+ * Copyright (c) 2024, Igor Belwon <igor.belwon@mentallysanemainliners.org>
+ */
+
+#include <dt-bindings/clock/samsung,exynos990.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos990";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_cmgp;
+		pinctrl2 = &pinctrl_hsi1;
+		pinctrl3 = &pinctrl_hsi2;
+		pinctrl4 = &pinctrl_peric0;
+		pinctrl5 = &pinctrl_peric1;
+		pinctrl6 = &pinctrl_vts;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu6>;
+				};
+
+				core1 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x4>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x5>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@200 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m5";
+			reg = <0x6>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@201 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m5";
+			reg = <0x7>;
+			enable-method = "psci";
+		};
+	};
+
+	oscclk: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	pmu-a76 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+
+		interrupt-affinity = <&cpu4>,
+				     <&cpu5>;
+	};
+
+	pmu-mongoose-m5 {
+		compatible = "samsung,mongoose-pmu";
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+
+		interrupt-affinity = <&cpu6>,
+				     <&cpu7>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "hvc";
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos990-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		cmu_peris: clock-controller@10020000 {
+			compatible = "samsung,exynos990-cmu-peris";
+			reg = <0x10020000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIS_BUS>;
+			clock-names = "oscclk", "bus";
+		};
+
+		timer@10040000 {
+			compatible = "samsung,exynos990-mct",
+				     "samsung,exynos4210-mct";
+			reg = <0x10040000 0x800>;
+			clocks = <&oscclk>, <&cmu_peris CLK_GOUT_PERIS_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog_cl0: watchdog@10050000 {
+			compatible = "samsung,exynos990-wdt";
+			reg = <0x10050000 0x100>;
+			interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_GOUT_PERIS_WDT_CLUSTER0_PCLK>,
+				 <&oscclk>;
+			clock-names = "watchdog",
+				      "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+		};
+
+		watchdog_cl2: watchdog@10060000 {
+			compatible = "samsung,exynos990-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_GOUT_PERIS_WDT_CLUSTER2_PCLK>,
+				 <&oscclk>;
+			clock-names = "watchdog",
+				      "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <2>;
+		};
+
+		gic: interrupt-controller@10101000 {
+			compatible = "arm,gic-400";
+			reg = <0x10101000 0x1000>,
+			      <0x10102000 0x1000>,
+			      <0x10104000 0x2000>,
+			      <0x10106000 0x2000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+			#address-cells = <0>;
+			#size-cells = <1>;
+		};
+
+		cmu_peric0: clock-controller@10400000 {
+			compatible = "samsung,exynos990-cmu-peric0";
+			reg = <0x10400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
+		pinctrl_peric0: pinctrl@10430000 {
+			compatible = "samsung,exynos990-pinctrl";
+			reg = <0x10430000 0x1000>;
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_peric1: clock-controller@10700000 {
+			compatible = "samsung,exynos990-cmu-peric1";
+			reg = <0x10700000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
+		pinctrl_peric1: pinctrl@10730000 {
+			compatible = "samsung,exynos990-pinctrl";
+			reg = <0x10730000 0x1000>;
+			interrupts = <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_hsi0: clock-controller@10a00000 {
+			compatible = "samsung,exynos990-cmu-hsi0";
+			reg = <0x10a00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_USB31DRD>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_USBDP_DEBUG>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_DPGTC>;
+			clock-names = "oscclk",
+				      "bus",
+				      "usb31drd",
+				      "usbdp_debug",
+				      "dpgtc";
+		};
+
+		usbdrd_phy: phy@10c00000 {
+			compatible = "samsung,exynos990-usbdrd-phy";
+			reg = <0x10c00000 0x100>;
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_ACLK_PHYCTRL>,
+				 <&oscclk>;
+			clock-names = "phy", "ref";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usbdrd: usb@10e00000 {
+			compatible = "samsung,exynos990-dwusb3",
+				     "samsung,exynos850-dwusb3";
+			ranges = <0x0 0x10e00000 0x10000>;
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_BUS_CLK_EARLY>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_USB31DRD_REF_CLK_40>;
+			clock-names = "bus_early", "ref";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			usbdrd_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd_phy 0>;
+				phy-names = "usb2-phy";
+			};
+		};
+
+		pinctrl_hsi1: pinctrl@13040000 {
+			compatible = "samsung,exynos990-pinctrl";
+			reg = <0x13040000 0x1000>;
+			interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi2: pinctrl@13c30000 {
+			compatible = "samsung,exynos990-pinctrl";
+			reg = <0x13c30000 0x1000>;
+			interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_vts: pinctrl@15580000 {
+			compatible = "samsung,exynos990-pinctrl";
+			reg = <0x15580000 0x1000>;
+		};
+
+		pinctrl_alive: pinctrl@15850000 {
+			compatible = "samsung,exynos990-pinctrl";
+			reg = <0x15850000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos990-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pmu_system_controller: system-controller@15860000 {
+			compatible = "samsung,exynos990-pmu",
+				     "samsung,exynos7-pmu", "syscon";
+			reg = <0x15860000 0x10000>;
+
+			reboot: syscon-reboot {
+				compatible = "syscon-reboot";
+				regmap = <&pmu_system_controller>;
+				offset = <0x3a00>; /* SWRESET */
+				mask = <0x2>; /* SWRESET_TRIGGER */
+				value = <0x2>;
+			};
+		};
+
+		pinctrl_cmgp: pinctrl@15c30000 {
+			compatible = "samsung,exynos990-pinctrl";
+			reg = <0x15c30000 0x1000>;
+		};
+
+		cmu_top: clock-controller@1a330000 {
+			compatible = "samsung,exynos990-cmu-top";
+			reg = <0x1a330000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>;
+			clock-names = "oscclk";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+
+		/*
+		 * Non-updatable, broken stock Samsung bootloader does not
+		 * configure CNTFRQ_EL0
+		 */
+		clock-frequency = <26000000>;
+	};
+};
+
+#include "exynos990-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
index eec3192c0631..de2c1de51a76 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
+++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "exynosautov9.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Samsung ExynosAuto v9 SADK board";
@@ -32,6 +33,31 @@
 		      <0xa 0x00000000 0x2 0x00000000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_wakeup &key_volup &key_voldown>;
+
+		key-wakeup {
+			label = "Wakeup";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpg2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpg1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	ufs_0_fixed_vcc_reg: regulator-0 {
 		compatible = "regulator-fixed";
 		regulator-name = "ufs-vcc";
@@ -49,6 +75,37 @@
 	};
 };
 
+&pinctrl_alive {
+	key_wakeup: key-wakeup-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_peric1 {
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpg2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpg1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_tout3>;
+	status = "okay";
+};
+
 &serial_0 {
 	pinctrl-0 = <&uart0_bus_dual>;
 	status = "okay";
@@ -65,13 +122,11 @@
 &ufs_0 {
 	status = "okay";
 	vcc-supply = <&ufs_0_fixed_vcc_reg>;
-	vcc-fixed-regulator;
 };
 
 &ufs_1 {
 	status = "okay";
 	vcc-supply = <&ufs_1_fixed_vcc_reg>;
-	vcc-fixed-regulator;
 };
 
 &usi_0 {
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
index 2013718532f3..66628cb32776 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -166,7 +166,8 @@
 		ranges = <0x0 0x0 0x0 0x20000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos850-chipid";
+			compatible = "samsung,exynosautov9-chipid",
+				     "samsung,exynos850-chipid";
 			reg = <0x10000000 0x24>;
 		};
 
@@ -207,6 +208,34 @@
 				      "dout_clkcmu_peric1_ip";
 		};
 
+		cmu_fsys1: clock-controller@17040000 {
+			compatible = "samsung,exynosautov9-cmu-fsys1";
+			reg = <0x17040000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_FSYS1_BUS>,
+				 <&cmu_top GOUT_CLKCMU_FSYS1_MMC_CARD>,
+				 <&cmu_top DOUT_CLKCMU_FSYS1_USBDRD>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_fsys1_bus",
+				      "gout_clkcmu_fsys1_mmc_card",
+				      "dout_clkcmu_fsys1_usbdrd";
+		};
+
+		cmu_fsys0: clock-controller@17700000 {
+			compatible = "samsung,exynosautov9-cmu-fsys0";
+			reg = <0x17700000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_FSYS0_BUS>,
+				 <&cmu_top DOUT_CLKCMU_FSYS0_PCIE>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_fsys0_bus",
+				      "dout_clkcmu_fsys0_pcie";
+		};
+
 		cmu_fsys2: clock-controller@17c00000 {
 			compatible = "samsung,exynosautov9-cmu-fsys2";
 			reg = <0x17c00000 0x8000>;
@@ -222,6 +251,52 @@
 				      "dout_fsys2_clkcmu_ethernet";
 		};
 
+		cmu_dpum: clock-controller@18c00000 {
+			compatible = "samsung,exynosautov9-cmu-dpum";
+			reg = <0x18c00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_DPUM_BUS>;
+			clock-names = "oscclk", "bus";
+		};
+
+		sysmmu_dpum_0: sysmmu@18c80000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x18c80000 0x10000>;
+			interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_dpum CLK_GOUT_DPUM_SYSMMU_D0_CLK>;
+			clock-names = "sysmmu";
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_dpum_1: sysmmu@18c90000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x18c90000 0x10000>;
+			interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_dpum CLK_GOUT_DPUM_SYSMMU_D1_CLK>;
+			clock-names = "sysmmu";
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_dpum_2: sysmmu@18ca0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x18ca0000 0x10000>;
+			interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_dpum CLK_GOUT_DPUM_SYSMMU_D2_CLK>;
+			clock-names = "sysmmu";
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_dpum_3: sysmmu@18cb0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x18cb0000 0x10000>;
+			interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_dpum CLK_GOUT_DPUM_SYSMMU_D3_CLK>;
+			clock-names = "sysmmu";
+			#iommu-cells = <0>;
+		};
+
 		cmu_core: clock-controller@1b030000 {
 			compatible = "samsung,exynosautov9-cmu-core";
 			reg = <0x1b030000 0x8000>;
@@ -281,11 +356,13 @@
 			reg = <0x10450000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynosautov9-wakeup-eint";
+				compatible = "samsung,exynosautov9-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 			};
 		};
 
-		pinctrl_aud: pinctrl@19c60000{
+		pinctrl_aud: pinctrl@19c60000 {
 			compatible = "samsung,exynosautov9-pinctrl";
 			reg = <0x19c60000 0x1000>;
 		};
@@ -321,7 +398,8 @@
 		};
 
 		pmu_system_controller: system-controller@10460000 {
-			compatible = "samsung,exynos7-pmu", "syscon";
+			compatible = "samsung,exynosautov9-pmu",
+				     "samsung,exynos7-pmu", "syscon";
 			reg = <0x10460000 0x10000>;
 
 			reboot: syscon-reboot {
@@ -342,17 +420,20 @@
 		};
 
 		syscon_fsys2: syscon@17c20000 {
-			compatible = "samsung,exynosautov9-sysreg", "syscon";
+			compatible = "samsung,exynosautov9-fsys2-sysreg",
+				     "samsung,exynosautov9-sysreg", "syscon";
 			reg = <0x17c20000 0x1000>;
 		};
 
 		syscon_peric0: syscon@10220000 {
-			compatible = "samsung,exynosautov9-sysreg", "syscon";
+			compatible = "samsung,exynosautov9-peric0-sysreg",
+				     "samsung,exynosautov9-sysreg", "syscon";
 			reg = <0x10220000 0x2000>;
 		};
 
 		syscon_peric1: syscon@10820000 {
-			compatible = "samsung,exynosautov9-sysreg", "syscon";
+			compatible = "samsung,exynosautov9-peric1-sysreg",
+				     "samsung,exynosautov9-sysreg", "syscon";
 			reg = <0x10820000 0x2000>;
 		};
 
@@ -361,7 +442,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103000c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1000>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -400,6 +481,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <256>;
 				status = "disabled";
 			};
 
@@ -423,7 +505,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103100c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1004>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -452,7 +534,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103200c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1008>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -491,6 +573,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <256>;
 				status = "disabled";
 			};
 
@@ -514,7 +597,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103300c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x100c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -543,7 +626,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103400c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1010>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -582,6 +665,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -605,7 +689,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103500c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1014>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -634,7 +718,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103600c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1018>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -673,6 +757,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -696,7 +781,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103700c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x101c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -725,7 +810,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103800c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1020>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -764,6 +849,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -787,7 +873,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103900c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1024>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -816,7 +902,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103a00c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1028>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -855,6 +941,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -878,7 +965,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103b00c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x102c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -907,7 +994,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109000c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1000>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -946,6 +1033,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <256>;
 				status = "disabled";
 			};
 
@@ -969,7 +1057,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109100c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1004>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -998,7 +1086,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109200c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1008>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1037,6 +1125,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -1060,7 +1149,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109300c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x100c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1089,7 +1178,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109400c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1010>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1128,6 +1217,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -1151,7 +1241,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109500c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1014>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1180,7 +1270,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109600c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1018>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1219,6 +1309,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -1242,7 +1333,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109700c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x101c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1271,7 +1362,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109800c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1020>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1310,6 +1401,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -1333,7 +1425,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109900c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1024>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1362,7 +1454,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109a00c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1028>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1399,6 +1491,7 @@
 				num-cs = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				fifo-depth = <64>;
 				status = "disabled";
 			};
 
@@ -1422,7 +1515,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109b00c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x102c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1529,6 +1622,17 @@
 			samsung,syscon-phandle = <&pmu_system_controller>;
 			samsung,cluster-index = <1>;
 		};
+
+		pwm: pwm@103f0000 {
+			compatible = "samsung,exynosautov9-pwm",
+				     "samsung,exynos4210-pwm";
+			reg = <0x103f0000 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&xtcxo>;
+			clock-names = "timers";
+			status = "disabled";
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi
new file mode 100644
index 000000000000..663e8265cbf5
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi
@@ -0,0 +1,1266 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's ExynosAutov920 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_aud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb5: gpb5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb6: gpb6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi0 {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi1 {
+	gph8: gph8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi2 {
+	gph3: gph3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph4: gph4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph5: gph5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph6: gph6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi2ufs {
+	gph2: gph2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gph2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	ufs_refclk_out_1: ufs-refclk-out-1-pins {
+		samsung,pins = "gph2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	ufs_rst_n_1: ufs-rst-n-1-pins {
+		samsung,pins = "gph2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg4: gpg4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg5: gpg5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* PWM PERIC0 */
+	pwm_tout0: pwm-tout0-pins {
+		samsung,pins = "gpg0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout1: pwm-tout1-pins {
+		samsung,pins = "gpg0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout2: pwm-tout2-pins {
+		samsung,pins = "gpg0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout3: pwm-tout3-pins {
+		samsung,pins = "gpg0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI00 */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart0_bus_dual: uart0-bus-dual-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI01 */
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_bus_dual: uart1-bus-dual-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI02 */
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_dual: uart2-bus-dual-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI03 */
+	uart3_bus: uart3-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI04 */
+	uart4_bus: uart4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI05 */
+	uart5_bus: uart5-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI06 */
+	uart6_bus: uart6-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_dual: uart6-bus-dual-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI07 */
+	uart7_bus: uart7-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_dual: uart7-bus-dual-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI08 */
+	uart8_bus: uart8-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_dual: uart8-bus-dual-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI00  */
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI00_I2C */
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI01 */
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI01_I2C */
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI02 */
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI02_I2C */
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI03 */
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI03_I2C */
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI04 */
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI04_I2C */
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI05 */
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI05_I2C */
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI06 */
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI06_I2C */
+	hsi2c13_bus: hsi2c13-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI07 */
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI07_I2C */
+	hsi2c15_bus: hsi2c15-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI08 */
+	hsi2c16_bus: hsi2c16-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI08_I2C */
+	hsi2c17_bus: hsi2c17-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI00 */
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI01 */
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI02 */
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI03 */
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI04 */
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI05 */
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs: spi5-cs-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI06 */
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI07 */
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI08 */
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I3C PERIC0 */
+	i3c0_bus: i3c0-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c1_bus: i3c1-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c2_bus: i3c2-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c3_bus: i3c3-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp10: gpp10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp11: gpp11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp12: gpp12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* UART PERIC1 USI09 */
+	uart9_bus: uart9-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_dual: uart9-bus-dual-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI10 */
+	uart10_bus: uart10-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_dual: uart10-bus-dual-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI11 */
+	uart11_bus: uart11-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2", "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_dual: uart11-bus-dual-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1_USI12 */
+	uart12_bus: uart12-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_dual: uart12-bus-dual-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1_USI13 */
+	uart13_bus: uart13-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_dual: uart13-bus-dual-pins {
+		samsung,pins = "gpp7-4", "gpp7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI14 */
+	uart14_bus: uart14-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_dual: uart14-bus-dual-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI15 */
+	uart15_bus: uart15-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_dual: uart15-bus-dual-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI16 */
+	uart16_bus: uart16-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart16_bus_dual: uart16-bus-dual-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI17 */
+	uart17_bus: uart17-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2", "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart17_bus_dual: uart17-bus-dual-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI09 */
+	hsi2c18_bus: hsi2c18-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI09_I2C */
+	hsi2c19_bus: hsi2c19-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI10 */
+	hsi2c20_bus: hsi2c20-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI10_I2C */
+	hsi2c21_bus: hsi2c21-bus-pins {
+		samsung,pins = "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI11 */
+	hsi2c22_bus: hsi2c22-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI11_I2C */
+	hsi2c23_bus: hsi2c23-bus-pins {
+		samsung,pins = "gpp10-2", "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI12 */
+	hsi2c24_bus: hsi2c24-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI12_I2C */
+	hsi2c25_bus: hsi2c25-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI13 */
+	hsi2c26_bus: hsi2c26-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI13_I2C */
+	hsi2c27_bus: hsi2c27-bus-pins {
+		samsung,pins = "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI14 */
+	hsi2c28_bus: hsi2c28-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI14_I2C */
+	hsi2c29_bus: hsi2c29-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI15 */
+	hsi2c30_bus: hsi2c30-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI15_I2C */
+	hsi2c31_bus: hsi2c31-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI16 */
+	hsi2c32_bus: hsi2c32-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI16_I2C */
+	hsi2c33_bus: hsi2c33-bus-pins {
+		samsung,pins = "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI17 */
+	hsi2c34_bus: hsi2c34-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI17_I2C */
+	hsi2c35_bus: hsi2c35-bus-pins {
+		samsung,pins = "gpp12-2", "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI09 */
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI10 */
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI11 */
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI12 */
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI13 */
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI14 */
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI15 */
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi15_cs_func: spi15-cs-func-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI16 */
+	spi16_bus: spi16-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi16_cs: spi16-cs-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi16_cs_func: spi16-cs-func-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI17 */
+	spi17_bus: spi17-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi17_cs: spi17-cs-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi17_cs_func: spi17-cs-func-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I3C PERIC1 */
+	i3c4_bus: i3c4-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c5_bus: i3c5-bus-pins {
+		samsung,pins = "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c6_bus: i3c6-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c7_bus: i3c7-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
new file mode 100644
index 000000000000..a397f068ed53
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SADK board device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+#include "exynosautov920.dtsi"
+#include "exynos-pinctrl.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Samsung ExynosAutov920 SADK board";
+	compatible = "samsung,exynosautov920-sadk", "samsung,exynosautov920";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_wakeup &key_back>;
+
+		key-wakeup {
+			label = "KEY_WAKEUP";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		key-back {
+			label = "KEY_BACK";
+			linux,code = <KEY_BACK>;
+			gpios = <&gpp6 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x70000000>,
+		      <0x8 0x80000000 0x1 0xfba00000>,
+		      <0xa 0x00000000 0x2 0x00000000>;
+	};
+};
+
+&pinctrl_alive {
+	key_wakeup: key-wakeup-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+	};
+};
+
+&pinctrl_peric1 {
+	key_back: key-back-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_tout0>;
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&usi_0 {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&xtcxo {
+	clock-frequency = <38400000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
new file mode 100644
index 000000000000..0fdf2062930a
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
@@ -0,0 +1,1509 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SoC device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ */
+
+#include <dt-bindings/clock/samsung,exynosautov920.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "samsung,exynosautov920";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_hsi0;
+		pinctrl3 = &pinctrl_hsi1;
+		pinctrl4 = &pinctrl_hsi2;
+		pinctrl5 = &pinctrl_hsi2ufs;
+		pinctrl6 = &pinctrl_peric0;
+		pinctrl7 = &pinctrl_peric1;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a78-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	xtcxo: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	cpus: cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu8>;
+				};
+				core1 {
+					cpu = <&cpu9>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl0>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl0>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl0>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl0>;
+		};
+
+		cpu4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl1>;
+		};
+
+		cpu5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl1>;
+		};
+
+		cpu6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl1>;
+		};
+
+		cpu7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl1>;
+		};
+
+		cpu8: cpu@20000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x20000>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl2>;
+		};
+
+		cpu9: cpu@20100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x20100>;
+			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl2>;
+		};
+
+		l2_cache_cl0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_cache_cl0>;
+		};
+
+		l2_cache_cl1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_cache_cl1>;
+		};
+
+		l2_cache_cl2: l2-cache2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_cache_cl2>;
+		};
+
+		l3_cache_cl0: l3-cache0 {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+			cache-size = <0x200000>;/* 2MB L3 cache for cpu cluster-0 */
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+
+		l3_cache_cl1: l3-cache1 {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+			cache-size = <0x200000>;/* 2MB L3 cache for cpu cluster-1 */
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+
+		l3_cache_cl2: l3-cache2 {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+			cache-size = <0x100000>;/* 1MB L3 cache for cpu cluster-2 */
+			cache-line-size = <64>;
+			cache-sets = <1365>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynosautov920-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		cmu_misc: clock-controller@10020000 {
+			compatible = "samsung,exynosautov920-cmu-misc";
+			reg = <0x10020000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_MISC_NOC>;
+			clock-names = "oscclk",
+				      "noc";
+		};
+
+		watchdog_cl0: watchdog@10060000 {
+			compatible = "samsung,exynosautov920-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xtcxo>, <&xtcxo>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+		};
+
+		watchdog_cl1: watchdog@10070000 {
+			compatible = "samsung,exynosautov920-wdt";
+			reg = <0x10070000 0x100>;
+			interrupts = <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xtcxo>, <&xtcxo>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <1>;
+		};
+
+		gic: interrupt-controller@10400000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x10400000 0x10000>,
+			      <0x10460000 0x140000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		spdma0: dma-controller@10180000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10180000 0x1000>;
+			interrupts = <GIC_SPI 918 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		spdma1: dma-controller@10190000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10190000 0x1000>;
+			interrupts = <GIC_SPI 917 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma0: dma-controller@101a0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x101a0000 0x1000>;
+			interrupts = <GIC_SPI 916 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma1: dma-controller@101b0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x101b0000 0x1000>;
+			interrupts = <GIC_SPI 915 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma2: dma-controller@101c0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x101c0000 0x1000>;
+			interrupts = <GIC_SPI 914 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma3: dma-controller@101d0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x101d0000 0x1000>;
+			interrupts = <GIC_SPI 913 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma4: dma-controller@101e0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x101e0000 0x1000>;
+			interrupts = <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		cmu_peric0: clock-controller@10800000 {
+			compatible = "samsung,exynosautov920-cmu-peric0";
+			reg = <0x10800000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_PERIC0_NOC>,
+				 <&cmu_top DOUT_CLKCMU_PERIC0_IP>;
+			clock-names = "oscclk",
+				      "noc",
+				      "ip";
+		};
+
+		syscon_peric0: syscon@10820000 {
+			compatible = "samsung,exynosautov920-peric0-sysreg",
+				     "syscon";
+			reg = <0x10820000 0x2000>;
+		};
+
+		pinctrl_peric0: pinctrl@10830000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x10830000 0x10000>;
+			interrupts = <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usi_0: usi@108800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108800c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1000>;
+			samsung,mode = <USI_MODE_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_0: serial@10880000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10880000 0xc0>;
+				interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+
+			spi_0: spi@10880000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10880000 0x30>;
+				interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi0_bus &spi0_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 1>, <&pdma0 0>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi_1: usi@108a00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108a00c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1008>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_1: serial@108a0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x108a0000 0xc0>;
+				interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+
+			spi_1: spi@108a0000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x108a0000 0x30>;
+				interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_bus &spi1_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 3>, <&pdma0 2>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi_2: usi@108c00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108c00c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1010>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_2: serial@108c0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x108c0000 0xc0>;
+				interrupts = <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart2_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_2: spi@108c0000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x108c0000 0x30>;
+				interrupts = <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_bus &spi2_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 5>, <&pdma0 4>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_3: usi@108e00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108e00c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1018>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_3: serial@108e0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x108e0000 0xc0>;
+				interrupts = <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart3_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_3: spi@108e0000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x108e0000 0x30>;
+				interrupts = <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi3_bus &spi3_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 7>, <&pdma0 6>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_4: usi@109000c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109000c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1020>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_4: serial@10900000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10900000 0xc0>;
+				interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart4_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_4: spi@10900000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10900000 0x30>;
+				interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi4_bus &spi4_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 9>, <&pdma0 8>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_5: usi@109200c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109200c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1028>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_5: serial@10920000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10920000 0xc0>;
+				interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart5_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_5: spi@10920000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10920000 0x30>;
+				interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi5_bus &spi5_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 11>, <&pdma0 10>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_6: usi@109400c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109400c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1030>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_6: serial@10940000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10940000 0xc0>;
+				interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart6_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_6: spi@10940000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10940000 0x30>;
+				interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi6_bus &spi6_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 13>, <&pdma0 12>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_7: usi@109600c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109600c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1038>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_7: serial@10960000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10960000 0xc0>;
+				interrupts = <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart7_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_7: spi@10960000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10960000 0x30>;
+				interrupts = <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi7_bus &spi7_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 15>, <&pdma0 14>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_8: usi@109800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109800c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1040>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_8: serial@10980000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10980000 0xc0>;
+				interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart8_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_8: spi@10980000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10980000 0x30>;
+				interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi8_bus &spi8_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 17>, <&pdma0 16>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+
+		};
+
+		pwm: pwm@109b0000 {
+			compatible = "samsung,exynosautov920-pwm",
+				     "samsung,exynos4210-pwm";
+			reg = <0x109b0000 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&xtcxo>;
+			clock-names = "timers";
+			status = "disabled";
+		};
+
+		cmu_peric1: clock-controller@10c00000 {
+			compatible = "samsung,exynosautov920-cmu-peric1";
+			reg = <0x10c00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_PERIC1_NOC>,
+				 <&cmu_top DOUT_CLKCMU_PERIC1_IP>;
+			clock-names = "oscclk",
+				      "noc",
+				      "ip";
+		};
+
+		syscon_peric1: syscon@10c20000 {
+			compatible = "samsung,exynosautov920-peric1-sysreg",
+				     "syscon";
+			reg = <0x10c20000 0x2000>;
+		};
+
+		pinctrl_peric1: pinctrl@10c30000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x10c30000 0x10000>;
+			interrupts = <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usi_9: usi@10c800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10c800c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1000>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_9: serial@10c8000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10c80000 0xc0>;
+				interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart9_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+
+			spi_9: spi@10c80000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10c80000 0x30>;
+				interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi9_bus &spi9_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 1>, <&pdma1 0>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi_10: usi@10ca00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10ca00c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1008>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_10: serial@10ca0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10ca0000 0xc0>;
+				interrupts = <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart10_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_10: spi@10ca0000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10ca0000 0x30>;
+				interrupts = <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi10_bus &spi10_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 3>, <&pdma1 2>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_11: usi@10cc00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10cc00c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1010>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_11: serial@10cc0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10cc0000 0xc0>;
+				interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart11_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_11: spi@10cc0000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10cc0000 0x30>;
+				interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi11_bus &spi11_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 5>, <&pdma1 4>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_12: usi@10ce00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10ce00c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1018>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_12: serial@10ce0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10ce0000 0xc0>;
+				interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart12_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_12: spi@10ce0000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10ce0000 0x30>;
+				interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi12_bus &spi12_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 7>, <&pdma1 6>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_13: usi@10d000c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d000c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1020>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_13: serial@10d00000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d00000 0xc0>;
+				interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart13_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_13: spi@10d00000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10d00000 0x30>;
+				interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi13_bus &spi13_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 9>, <&pdma1 8>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_14: usi@10d200c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d200c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1028>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_14: serial@10d20000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d20000 0xc0>;
+				interrupts = <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart14_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_14: spi@10d20000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10d20000 0x30>;
+				interrupts = <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi14_bus &spi14_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 11>, <&pdma1 10>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_15: usi@10d400c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d400c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1030>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_15: serial@10d40000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d40000 0xc0>;
+				interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart15_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_15: spi@10d40000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10d40000 0x30>;
+				interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi15_bus &spi15_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 13>, <&pdma1 12>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_16: usi@10d600c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d600c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1038>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_16: serial@10d60000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d60000 0xc0>;
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart16_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_16: spi@10d60000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10d60000 0x30>;
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi16_bus &spi16_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 15>, <&pdma1 14>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_17: usi@10d800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d800c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1040>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_17: serial@10d80000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d80000 0xc0>;
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart17_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_17: spi@10d80000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10d80000 0x30>;
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi17_bus &spi17_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 17>, <&pdma1 16>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		cmu_top: clock-controller@11000000 {
+			compatible = "samsung,exynosautov920-cmu-top";
+			reg = <0x11000000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>;
+			clock-names = "oscclk";
+		};
+
+		pinctrl_alive: pinctrl@11850000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x11850000 0x10000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynosautov920-wakeup-eint";
+			};
+		};
+
+		pmu_system_controller: system-controller@11860000 {
+			compatible = "samsung,exynosautov920-pmu",
+				     "samsung,exynos7-pmu","syscon";
+			reg = <0x11860000 0x10000>;
+		};
+
+		cmu_hsi0: clock-controller@16000000 {
+			compatible = "samsung,exynosautov920-cmu-hsi0";
+			reg = <0x16000000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_HSI0_NOC>;
+			clock-names = "oscclk",
+				      "noc";
+		};
+
+		pinctrl_hsi0: pinctrl@16040000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16040000 0x10000>;
+			interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_hsi1: clock-controller@16400000 {
+			compatible = "samsung,exynosautov920-cmu-hsi1";
+			reg = <0x16400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_HSI1_NOC>,
+				 <&cmu_top DOUT_CLKCMU_HSI1_USBDRD>,
+				 <&cmu_top DOUT_CLKCMU_HSI1_MMC_CARD>;
+			clock-names = "oscclk",
+				      "noc",
+				      "usbdrd",
+				      "mmc_card";
+		};
+
+		pinctrl_hsi1: pinctrl@16450000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16450000 0x10000>;
+			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_hsi2: clock-controller@16b00000 {
+			compatible = "samsung,exynosautov920-cmu-hsi2";
+			reg = <0x16b00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_NOC>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_NOC_UFS>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_UFS_EMBD>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_ETHERNET>;
+			clock-names = "oscclk",
+				      "noc",
+				      "ufs",
+				      "embd",
+				      "ethernet";
+		};
+
+		pinctrl_hsi2: pinctrl@16c10000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16c10000 0x10000>;
+			interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi2ufs: pinctrl@16d20000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16d20000 0x10000>;
+			interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ufs_0_phy: phy@16e04000 {
+			compatible = "samsung,exynosautov920-ufs-phy";
+			reg = <0x16e04000 0x4000>;
+			reg-names = "phy-pma";
+			clocks = <&xtcxo>;
+			clock-names = "ref_clk";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pinctrl_aud: pinctrl@1a460000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x1a460000 0x10000>;
+		};
+
+		cmu_cpucl0: clock-controller@1ec00000 {
+			compatible = "samsung,exynosautov920-cmu-cpucl0";
+			reg = <0x1ec00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL0_SWITCH>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL0_CLUSTER>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL0_DBG>;
+			clock-names = "oscclk",
+				      "switch",
+				      "cluster",
+				      "dbg";
+		};
+
+		cmu_cpucl1: clock-controller@1ed00000 {
+			compatible = "samsung,exynosautov920-cmu-cpucl1";
+			reg = <0x1ed00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL1_SWITCH>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL1_CLUSTER>;
+			clock-names = "oscclk",
+				      "switch",
+				      "cluster";
+		};
+
+		cmu_cpucl2: clock-controller@1ee00000 {
+			compatible = "samsung,exynosautov920-cmu-cpucl2";
+			reg = <0x1ee00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL2_SWITCH>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL2_CLUSTER>;
+			clock-names = "oscclk",
+				      "switch",
+				      "cluster";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "exynosautov920-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/google/Makefile b/arch/arm64/boot/dts/exynos/google/Makefile
new file mode 100644
index 000000000000..7385f82b03c9
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_ARCH_EXYNOS) += \
+	gs101-oriole.dtb \
+	gs101-raven.dtb
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
new file mode 100644
index 000000000000..8df42bedbc03
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Oriole Device Tree
+ *
+ * Copyright 2021-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "gs101-pixel-common.dtsi"
+
+/ {
+	model = "Oriole";
+	compatible = "google,gs101-oriole", "google,gs101";
+};
+
+&cont_splash_mem {
+	reg = <0x0 0xfac00000 (1080 * 2400 * 4)>;
+	status = "okay";
+};
+
+&framebuffer0 {
+	width = <1080>;
+	height = <2400>;
+	stride = <(1080 * 4)>;
+	format = "a8r8g8b8";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
new file mode 100644
index 000000000000..a675f822acec
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
@@ -0,0 +1,1249 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GS101 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright 2019-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+#include "gs101-pinctrl.h"
+
+&pinctrl_gpio_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa5: gpa5-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa9: gpa9-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa10: gpa10-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	uart15_bus: uart15-bus-pins {
+		samsung,pins = "gpa2-3", "gpa2-4";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	uart16_bus: uart16-bus-pins {
+		samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	uart17_bus: uart17-bus-pins {
+		samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpa4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_far_alive {
+	gpa6: gpa6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa7: gpa7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa8: gpa8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa11: gpa11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+};
+
+&pinctrl_gsacore {
+	gps0: gps0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps1: gps1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps2: gps2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_gsactrl {
+	gps3: gps3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi1 {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcie0_clkreq: pcie0-clkreq-pins {
+		samsung,pins = "gph0-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
+	};
+
+	pcie0_perst: pcie0-perst-pins {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_hsi2 {
+	gph2: gph2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph3: gph3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph4: gph4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gph4-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gph4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gph4-3", "gph4-4", "gph4-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gph3-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gph3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	pcie1_clkreq: pcie1-clkreq-pins {
+		samsung,pins = "gph2-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
+	};
+
+	pcie1_perst: pcie1-perst-pins {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp10: gpp10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp11: gpp11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp12: gpp12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp13: gpp13-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp14: gpp14-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp15: gpp15-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp16: gpp16-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp17: gpp17-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp18: gpp18-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp19: gpp19-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* USI_PERIC0_UART_DBG */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	disp_te_pri_on: disp-te-pri-on-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+	};
+
+	disp_te_pri_off: disp-te-pri-off-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
+	};
+
+	disp_te_sec_on: disp-te-sec-on-pins {
+		samsung,pins = "gpp0-4";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+	};
+
+	disp_te_sec_off: disp-te-sec-off-pins {
+		samsung,pins = "gpp0-4";
+		samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
+	};
+
+	sensor_mclk1_out: sensor-mclk1-out-pins {
+		samsung,pins = "gpp3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk1_fn: sensor-mclk1-fn-pins {
+		samsung,pins = "gpp3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk2_out: sensor-mclk2-out-pins {
+		samsung,pins = "gpp5-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk2_fn: sensor-mclk2-fn-pins {
+		samsung,pins = "gpp5-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk3_out: sensor-mclk3-out-pins {
+		samsung,pins = "gpp7-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk3_fn: sensor-mclk3-fn-pins {
+		samsung,pins = "gpp7-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk4_out: sensor-mclk4-out-pins {
+		samsung,pins = "gpp9-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk4_fn: sensor-mclk4-fn-pins {
+		samsung,pins = "gpp9-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk5_out: sensor-mclk5-out-pins {
+		samsung,pins = "gpp11-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk5_fn: sensor-mclk5-fn-pins {
+		samsung,pins = "gpp11-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk6_out: sensor-mclk6-out-pins {
+		samsung,pins = "gpp13-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk6_fn: sensor-mclk6-fn-pins {
+		samsung,pins = "gpp13-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk7_out: sensor-mclk7-out-pins {
+		samsung,pins = "gpp15-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk7_fn: sensor-mclk7-fn-pins {
+		samsung,pins = "gpp15-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk8_out: sensor-mclk8-out-pins {
+		samsung,pins = "gpp17-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk8_fn: sensor-mclk8-fn-pins {
+		samsung,pins = "gpp17-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart14_bus_single: uart14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1",
+			       "gpp18-2", "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-pud-pdn = <GS101_PIN_PDN_OUT0>;
+	};
+
+	uart8_bus_single: uart8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2",
+			       "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart7_bus_single: uart7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1",
+			       "gpp14-2", "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart6_bus_single: uart6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1",
+			       "gpp12-2", "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart5_bus_single: uart5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1",
+			       "gpp10-2", "gpp10-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart4_bus_single: uart4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1",
+			       "gpp8-2", "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart3_bus_single: uart3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1",
+			       "gpp6-2", "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart2_bus_single: uart2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1",
+			       "gpp4-2", "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart1_bus_single: uart1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1",
+			       "gpp2-2", "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpp20: gpp20-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp21: gpp21-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp22: gpp22-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp23: gpp23-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp24: gpp24-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp25: gpp25-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp26: gpp26-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp27: gpp27-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c13_bus: hsi2c13-bus-pins  {
+		samsung,pins = "gpp25-0", "gpp25-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart13_bus_single: uart13-bus-pins {
+		samsung,pins = "gpp25-0", "gpp25-1",
+			       "gpp25-2", "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart12_bus_single: uart12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5",
+			       "gpp23-6", "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs2: spi14-cs2-pins {
+		samsung,pins = "gpp23-6";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart11_bus_single: uart11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1",
+			       "gpp23-2", "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart10_bus_single: uart10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1",
+			       "gpp21-2", "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart9_bus_single: uart9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5",
+			       "gpp20-6", "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart0_bus_single: uart0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1",
+			       "gpp20-2", "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
new file mode 100644
index 000000000000..b7d276b1e25a
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Pinctrl binding constants for GS101
+ *
+ * Copyright 2020-2023 Google LLC
+ */
+
+#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__
+#define __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__
+
+#define GS101_PIN_PULL_NONE		0
+#define GS101_PIN_PULL_DOWN		1
+#define GS101_PIN_PULL_UP		3
+
+/* Pin function in power down mode */
+#define GS101_PIN_PDN_OUT0		0
+#define GS101_PIN_PDN_OUT1		1
+#define GS101_PIN_PDN_INPUT		2
+#define GS101_PIN_PDN_PREV		3
+
+/* GS101 drive strengths */
+#define GS101_PIN_DRV_2_5_MA		0
+#define GS101_PIN_DRV_5_MA		1
+#define GS101_PIN_DRV_7_5_MA		2
+#define GS101_PIN_DRV_10_MA		3
+
+#define GS101_PIN_FUNC_INPUT		0
+#define GS101_PIN_FUNC_OUTPUT		1
+#define GS101_PIN_FUNC_2		2
+#define GS101_PIN_FUNC_3		3
+#define GS101_PIN_FUNC_EINT		0xf
+
+#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__ */
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
new file mode 100644
index 000000000000..84ff3e047d3b
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree nodes common for all GS101-based Pixel
+ *
+ * Copyright 2021-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/usb/pd.h>
+#include "gs101-pinctrl.h"
+#include "gs101.dtsi"
+
+/ {
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		/* Bootloader expects bootargs specified otherwise it crashes */
+		bootargs = "";
+		stdout-path = &serial_0;
+
+		/* Use display framebuffer as setup by bootloader */
+		framebuffer0: framebuffer-0 {
+			compatible = "simple-framebuffer";
+			memory-region = <&cont_splash_mem>;
+			/* format properties to be added by actual board */
+			status = "disabled";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>;
+		pinctrl-names = "default";
+
+		button-vol-down {
+			label = "KEY_VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa7 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-vol-up {
+			label = "KEY_VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa8 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "KEY_POWER";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa10 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	reboot-mode {
+		compatible = "nvmem-reboot-mode";
+		nvmem-cells = <&nvmem_reboot_mode>;
+		nvmem-cell-names = "reboot-mode";
+		mode-bootloader = <0x800000fc>;
+		mode-charge = <0x8000000a>;
+		mode-dm-verity-device-corrupted = <0x80000050>;
+		mode-fastboot = <0x800000fa>;
+		mode-reboot-ab-update = <0x80000052>;
+		mode-recovery = <0x800000ff>;
+		mode-rescue = <0x800000f9>;
+		mode-shutdown-thermal = <0x80000051>;
+		mode-shutdown-thermal-battery = <0x80000051>;
+	};
+
+	/* TODO: Remove this once PMIC is implemented  */
+	reg_placeholder: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "placeholder_reg";
+	};
+
+	/* TODO: Remove this once S2MPG11 slave PMIC is implemented  */
+	ufs_0_fixed_vcc_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "ufs-vcc";
+		gpio = <&gpp0 1 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		cont_splash_mem: splash@fac00000 {
+			/* size to be updated by actual board */
+			reg = <0x0 0xfac00000 0x0>;
+			no-map;
+			status = "disabled";
+		};
+	};
+};
+
+&acpm_ipc {
+	pmic {
+		compatible = "samsung,s2mpg10-pmic";
+		interrupts-extended = <&gpa0 6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		system-power-controller;
+		wakeup-source;
+
+		regulators {
+		};
+	};
+};
+
+&ext_24_5m {
+	clock-frequency = <24576000>;
+};
+
+&ext_200m {
+	clock-frequency = <200000000>;
+};
+
+&hsi2c_8 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+};
+
+&hsi2c_12 {
+	status = "okay";
+	/* TODO: add the devices once drivers exist */
+
+	usb-typec@25 {
+		compatible = "maxim,max77759-tcpci", "maxim,max33359";
+		reg = <0x25>;
+		interrupts-extended = <&gpa8 2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&typec_int>;
+		pinctrl-names = "default";
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			self-powered;
+			try-power-role = "sink";
+			op-sink-microwatt = <2600000>;
+			slow-charger-loop;
+			/*
+			 * max77759 operating in reverse boost mode (0xA) can
+			 * source up to 1.5A while extboost can only do ~1A.
+			 * Since extboost is the primary path, advertise 900mA.
+			 */
+			source-pdos = <PDO_FIXED(5000, 900,
+						 (PDO_FIXED_SUSPEND
+						  | PDO_FIXED_USB_COMM
+						  | PDO_FIXED_DATA_SWAP
+						  | PDO_FIXED_DUAL_ROLE))>;
+			sink-pdos = <PDO_FIXED(5000, 3000,
+					       (PDO_FIXED_DATA_SWAP
+						| PDO_FIXED_USB_COMM
+						| PDO_FIXED_HIGHER_CAP
+						| PDO_FIXED_DUAL_ROLE))
+				     PDO_FIXED(9000, 2200, 0)
+				     PDO_PPS_APDO(5000, 11000, 3000)>;
+			sink-vdos = <VDO_IDH(1, 1, IDH_PTYPE_PERIPH, 0,
+					     IDH_PTYPE_DFP_HOST, 2, 0x18d1)
+				     VDO_CERT(0x0)
+				     VDO_PRODUCT(0x4ee1, 0x0)
+				     VDO_UFP(UFP_VDO_VER1_2,
+					     (DEV_USB2_CAPABLE
+					      | DEV_USB3_CAPABLE),
+					     UFP_RECEPTACLE, 0,
+					     AMA_VCONN_NOT_REQ, 0,
+					     UFP_ALTMODE_NOT_SUPP,
+					     UFP_USB32_GEN1)
+				     /* padding */ 0
+				     VDO_DFP(DFP_VDO_VER1_1,
+					     (HOST_USB2_CAPABLE
+					      | HOST_USB3_CAPABLE),
+					     DFP_RECEPTACLE, 0)>;
+			sink-vdos-v1 = <VDO_IDH(1, 1, IDH_PTYPE_PERIPH, 0,
+						0, 0, 0x18d1)
+					VDO_CERT(0x0)
+					VDO_PRODUCT(0x4ee1, 0x0)>;
+			/*
+			 * Until bootloader is updated to set those two when
+			 * console is enabled, we disable PD here.
+			 */
+			pd-disable;
+			typec-power-opmode = "default";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc0_orien_sw: endpoint {
+						remote-endpoint = <&usbdrd31_phy_orien_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc0_role_sw: endpoint {
+						remote-endpoint = <&usbdrd31_dwc3_role_switch>;
+					};
+				};
+			};
+		};
+	};
+
+	pmic@66 {
+		compatible = "maxim,max77759";
+		reg = <0x66>;
+
+		pinctrl-0 = <&if_pmic_int>;
+		pinctrl-names = "default";
+		interrupts-extended = <&gpa8 3 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		gpio {
+			compatible = "maxim,max77759-gpio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			/*
+			 * "Human-readable name [SIGNAL_LABEL]" where the
+			 * latter comes from the schematic
+			 */
+			gpio-line-names = "OTG boost [OTG_BOOST_EN]",
+					  "max20339 IRQ [MW_OVP_INT_L]";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		nvmem-0 {
+			compatible = "maxim,max77759-nvmem";
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				nvmem_reboot_mode: reboot-mode@0 {
+					reg = <0x0 0x4>;
+				};
+
+				boot-reason@4 {
+					reg = <0x4 0x4>;
+				};
+
+				shutdown-user-flag@8 {
+					reg = <0x8 0x1>;
+				};
+
+				rsoc@a {
+					reg = <0xa 0x2>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl_far_alive {
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa7-3";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa8-1";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	typec_int: typec-int-pins {
+		samsung,pins = "gpa8-2";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	if_pmic_int: if-pmic-int-pins {
+		samsung,pins = "gpa8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_gpio_alive {
+	pmic_int: pmic-int-pins {
+		samsung,pins = "gpa0-6";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	key_power: key-power-pins {
+		samsung,pins = "gpa10-1";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&ufs_0 {
+	status = "okay";
+	vcc-supply = <&ufs_0_fixed_vcc_reg>;
+};
+
+&ufs_0_phy {
+	status = "okay";
+};
+
+&usbdrd31 {
+	vdd10-supply = <&reg_placeholder>;
+	vdd33-supply = <&reg_placeholder>;
+	status = "okay";
+};
+
+&usbdrd31_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	maximum-speed = "super-speed-plus";
+	status = "okay";
+
+	port {
+		usbdrd31_dwc3_role_switch: endpoint {
+			remote-endpoint = <&usbc0_role_sw>;
+		};
+	};
+};
+
+&usbdrd31_phy {
+	orientation-switch;
+	/* TODO: Update these once PMIC is implemented */
+	pll-supply = <&reg_placeholder>;
+	dvdd-usb20-supply = <&reg_placeholder>;
+	vddh-usb20-supply = <&reg_placeholder>;
+	vdd33-usb20-supply = <&reg_placeholder>;
+	vdda-usbdp-supply = <&reg_placeholder>;
+	vddh-usbdp-supply = <&reg_placeholder>;
+	status = "okay";
+
+	port {
+		usbdrd31_phy_orien_switch: endpoint {
+			remote-endpoint = <&usbc0_orien_sw>;
+		};
+	};
+};
+
+&usi_uart {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&usi8 {
+	samsung,mode = <USI_MODE_I2C>;
+	status = "okay";
+};
+
+&usi12 {
+	samsung,mode = <USI_MODE_I2C>;
+	status = "okay";
+};
+
+&watchdog_cl0 {
+	timeout-sec = <30>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-raven.dts b/arch/arm64/boot/dts/exynos/google/gs101-raven.dts
new file mode 100644
index 000000000000..1e7e6b34b864
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-raven.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Raven Device Tree
+ *
+ * Copyright 2021-2023 Google LLC
+ * Copyright 2023-2025 Linaro Ltd
+ */
+
+/dts-v1/;
+
+#include "gs101-pixel-common.dtsi"
+
+/ {
+	model = "Raven";
+	compatible = "google,gs101-raven", "google,gs101";
+};
+
+&cont_splash_mem {
+	reg = <0x0 0xfac00000 (1440 * 3120 * 4)>;
+	status = "okay";
+};
+
+&framebuffer0 {
+	width = <1440>;
+	height = <3120>;
+	stride = <(1440 * 4)>;
+	format = "a8r8g8b8";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
new file mode 100644
index 000000000000..31c99526470d
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -0,0 +1,1526 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GS101 SoC
+ *
+ * Copyright 2019-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+#include <dt-bindings/clock/google,gs101.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "google,gs101";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_gpio_alive;
+		pinctrl1 = &pinctrl_far_alive;
+		pinctrl2 = &pinctrl_gsacore;
+		pinctrl3 = &pinctrl_gsactrl;
+		pinctrl4 = &pinctrl_peric0;
+		pinctrl5 = &pinctrl_peric1;
+		pinctrl6 = &pinctrl_hsi1;
+		pinctrl7 = &pinctrl_hsi2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu6>;
+				};
+				core1 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0000>;
+			enable-method = "psci";
+			cpu-idle-states = <&ananke_cpu_sleep>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0100>;
+			enable-method = "psci";
+			cpu-idle-states = <&ananke_cpu_sleep>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0200>;
+			enable-method = "psci";
+			cpu-idle-states = <&ananke_cpu_sleep>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0300>;
+			enable-method = "psci";
+			cpu-idle-states = <&ananke_cpu_sleep>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0400>;
+			enable-method = "psci";
+			cpu-idle-states = <&enyo_cpu_sleep>;
+			capacity-dmips-mhz = <620>;
+			dynamic-power-coefficient = <284>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0500>;
+			enable-method = "psci";
+			cpu-idle-states = <&enyo_cpu_sleep>;
+			capacity-dmips-mhz = <620>;
+			dynamic-power-coefficient = <284>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1";
+			reg = <0x0600>;
+			enable-method = "psci";
+			cpu-idle-states = <&hera_cpu_sleep>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <650>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1";
+			reg = <0x0700>;
+			enable-method = "psci";
+			cpu-idle-states = <&hera_cpu_sleep>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <650>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			ananke_cpu_sleep: cpu-ananke-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <70>;
+				exit-latency-us = <160>;
+				min-residency-us = <2000>;
+			};
+
+			enyo_cpu_sleep: cpu-enyo-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <150>;
+				exit-latency-us = <190>;
+				min-residency-us = <2500>;
+			};
+
+			hera_cpu_sleep: cpu-hera-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <235>;
+				exit-latency-us = <220>;
+				min-residency-us = <3500>;
+			};
+		};
+	};
+
+	/* ect node is required to be present by bootloader */
+	ect {
+	};
+
+	ext_24_5m: clock-1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	ext_200m: clock-2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "ext-200m";
+	};
+
+	firmware {
+		acpm_ipc: power-management {
+			compatible = "google,gs101-acpm-ipc";
+			mboxes = <&ap2apm_mailbox>;
+			shmem = <&apm_sram>;
+		};
+	};
+
+	pmu-0 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-1 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	pmu-2 {
+		compatible = "arm,cortex-x1-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>;
+	};
+
+	pmu-3 {
+		compatible = "arm,dsu-pmu";
+		cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+		       <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+		interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		gsa_reserved_protected: gsa@90200000 {
+			reg = <0x0 0x90200000 0x400000>;
+			no-map;
+		};
+
+		tpu_fw_reserved: tpu-fw@93000000 {
+			reg = <0x0 0x93000000 0x1000000>;
+			no-map;
+		};
+
+		aoc_reserve: aoc@94000000 {
+			reg = <0x0 0x94000000 0x03000000>;
+			no-map;
+		};
+
+		abl_reserved: abl@f8800000 {
+			reg = <0x0 0xf8800000 0x02000000>;
+			no-map;
+		};
+
+		dss_log_reserved: dss-log-reserved@fd3f0000 {
+			reg = <0x0 0xfd3f0000 0x0000e000>;
+			no-map;
+		};
+
+		debug_kinfo_reserved: debug-kinfo-reserved@fd3fe000 {
+			reg = <0x0 0xfd3fe000 0x00001000>;
+			no-map;
+		};
+
+		bldr_log_reserved: bldr-log-reserved@fd800000 {
+			reg = <0x0 0xfd800000 0x00100000>;
+			no-map;
+		};
+
+		bldr_log_hist_reserved: bldr-log-hist-reserved@fd900000 {
+			reg = <0x0 0xfd900000 0x00002000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>;
+
+		cmu_misc: clock-controller@10010000 {
+			compatible = "google,gs101-cmu-misc";
+			reg = <0x10010000 0x8000>;
+			#clock-cells = <1>;
+			clocks = <&cmu_top CLK_DOUT_CMU_MISC_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_MISC_SSS>;
+			clock-names = "bus", "sss";
+		};
+
+		timer@10050000 {
+			compatible = "google,gs101-mct",
+				     "samsung,exynos4210-mct";
+			reg = <0x10050000 0x800>;
+			clocks = <&ext_24_5m>, <&cmu_misc CLK_GOUT_MISC_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		watchdog_cl0: watchdog@10060000 {
+			compatible = "google,gs101-wdt";
+			reg = <0x10060000 0x100>;
+			clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0_PCLK>,
+				 <&ext_24_5m>;
+			clock-names = "watchdog", "watchdog_src";
+			interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+			status = "disabled";
+		};
+
+		watchdog_cl1: watchdog@10070000 {
+			compatible = "google,gs101-wdt";
+			reg = <0x10070000 0x100>;
+			clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1_PCLK>,
+				 <&ext_24_5m>;
+			clock-names = "watchdog", "watchdog_src";
+			interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <1>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@10400000 {
+			compatible = "arm,gic-v3";
+			#address-cells = <0>;
+			#interrupt-cells = <4>;
+			interrupt-controller;
+			reg = <0x10400000 0x10000>, /* GICD */
+			      <0x10440000 0x100000>;/* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5>;
+				};
+
+				ppi_cluster2: interrupt-partition-2 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+		};
+
+		cmu_peric0: clock-controller@10800000 {
+			compatible = "google,gs101-cmu-peric0";
+			reg = <0x10800000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&ext_24_5m>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
+		sysreg_peric0: syscon@10820000 {
+			compatible = "google,gs101-peric0-sysreg", "syscon";
+			reg = <0x10820000 0x10000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_SYSREG_PERIC0_PCLK>;
+		};
+
+		pinctrl_peric0: pinctrl@10840000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x10840000 0x00001000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_GPIO_PERIC0_PCLK>;
+			clock-names = "pclk";
+			interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		usi1: usi@109000c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1000>;
+			status = "disabled";
+
+			hsi2c_1: i2c@10900000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10900000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c1_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_1: serial@10900000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10900000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart1_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_1: spi@10900000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10900000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi1_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi2: usi@109100c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1004>;
+			status = "disabled";
+
+			hsi2c_2: i2c@10910000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10910000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c2_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_2: serial@10910000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10910000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart2_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_2: spi@10910000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10910000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi2_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi3: usi@109200c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1008>;
+			status = "disabled";
+
+			hsi2c_3: i2c@10920000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10920000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c3_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_3: serial@10920000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10920000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart3_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_3: spi@10920000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10920000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi3_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi4: usi@109300c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x100c>;
+			status = "disabled";
+
+			hsi2c_4: i2c@10930000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10930000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c4_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_4: serial@10930000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10930000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart4_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_4: spi@10930000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10930000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi4_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi5: usi@109400c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1010>;
+			status = "disabled";
+
+			hsi2c_5: i2c@10940000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10940000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c5_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_5: serial@10940000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10940000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart5_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_5: spi@10940000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10940000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi5_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi6: usi@109500c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1014>;
+			status = "disabled";
+
+			hsi2c_6: i2c@10950000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10950000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c6_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_6: serial@10950000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10950000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart6_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_6: spi@10950000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10950000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi6_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi7: usi@109600c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1018>;
+			status = "disabled";
+
+			hsi2c_7: i2c@10960000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10960000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c7_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_7: serial@10960000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10960000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart7_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_7: spi@10960000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10960000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi7_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi8: usi@109700c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x109700c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x101c>;
+			status = "disabled";
+
+			hsi2c_8: i2c@10970000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10970000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c8_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_8: serial@10970000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10970000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart8_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_8: spi@10970000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10970000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi8_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_uart: usi@10a000c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10a000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1020>;
+			samsung,mode = <USI_MODE_UART>;
+			status = "disabled";
+
+			serial_0: serial@10a00000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10a00000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 634 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart0_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi14: usi@10a200c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10a200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1028>;
+			status = "disabled";
+
+			hsi2c_14: i2c@10a20000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10a20000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c14_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_14: serial@10a20000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10a20000 0xc0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart14_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_14: spi@10a20000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10a20000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi14_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		cmu_peric1: clock-controller@10c00000 {
+			compatible = "google,gs101-cmu-peric1";
+			reg = <0x10c00000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&ext_24_5m>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
+		sysreg_peric1: syscon@10c20000 {
+			compatible = "google,gs101-peric1-sysreg", "syscon";
+			reg = <0x10c20000 0x10000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_SYSREG_PERIC1_PCLK>;
+		};
+
+		pinctrl_peric1: pinctrl@10c40000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x10c40000 0x00001000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_GPIO_PERIC1_PCLK>;
+			clock-names = "pclk";
+			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		usi0: usi@10d100c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10d100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1000>;
+			status = "disabled";
+
+			hsi2c_0: i2c@10d10000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d10000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c0_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_usi0: serial@10d10000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d10000 0xc0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart0_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_0: spi@10d10000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d10000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi0_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi9: usi@10d200c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10d200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1004>;
+			status = "disabled";
+
+			hsi2c_9: i2c@10d20000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d20000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c9_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_9: serial@10d20000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d20000 0xc0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart9_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_9: spi@10d20000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d20000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi9_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi10: usi@10d300c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10d300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1008>;
+			status = "disabled";
+
+			hsi2c_10: i2c@10d30000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d30000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c10_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_10: serial@10d30000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d30000 0xc0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart10_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_10: spi@10d30000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d30000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi10_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi11: usi@10d400c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10d400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x100c>;
+			status = "disabled";
+
+			hsi2c_11: i2c@10d40000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d40000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c11_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_11: serial@10d40000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d40000 0xc0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart11_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_11: spi@10d40000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d40000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi11_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi12: usi@10d500c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10d500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1010>;
+			status = "disabled";
+
+			hsi2c_12: i2c@10d50000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d50000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c12_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_12: serial@10d50000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d50000 0xc0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart12_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_12: spi@10d50000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d50000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi12_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi13: usi@10d600c0 {
+			compatible = "google,gs101-usi", "samsung,exynos850-usi";
+			reg = <0x10d600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1014>;
+			status = "disabled";
+
+			hsi2c_13: i2c@10d60000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d60000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c13_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_13: serial@10d60000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d60000 0xc0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart13_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_13: spi@10d60000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d60000 0x30>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&spi13_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		cmu_hsi0: clock-controller@11000000 {
+			compatible = "google,gs101-cmu-hsi0";
+			reg = <0x11000000 0x4000>;
+			#clock-cells = <1>;
+
+			clocks = <&ext_24_5m>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_DPGTC>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_USB31DRD>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_USBDPDBG>;
+			clock-names = "oscclk", "bus", "dpgtc", "usb31drd",
+				      "usbdpdbg";
+		};
+
+		usbdrd31_phy: phy@11100000 {
+			compatible = "google,gs101-usb31drd-phy";
+			reg = <0x11100000 0x0200>,
+			      <0x110f0000 0x0800>,
+			      <0x110e0000 0x2800>;
+			reg-names = "phy", "pcs", "pma";
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_ACLK_PHYCTRL>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB20_PHY_REFCLK_26>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_CTRL_ACLK>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_CTRL_PCLK>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USBDPPHY_SCL_APB_PCLK>;
+			clock-names = "phy", "ref", "ctrl_aclk", "ctrl_pclk", "scl_pclk";
+			#phy-cells = <1>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		usbdrd31: usb@11110000 {
+			compatible = "google,gs101-dwusb3";
+			ranges = <0x0 0x11110000 0x10000>;
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_BUS_CLK_EARLY>,
+				<&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_SUSPEND_CLK_26>,
+				<&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_LINK_ACLK>,
+				<&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_LINK_PCLK>;
+			clock-names = "bus_early", "susp_clk", "link_aclk", "link_pclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			usbdrd31_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+				clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_REF_CLK_40>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH 0>;
+				phys = <&usbdrd31_phy 0>, <&usbdrd31_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,has-lpm-erratum;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				status = "disabled";
+			};
+		};
+
+		pinctrl_hsi1: pinctrl@11840000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x11840000 0x00001000>;
+			/* TODO: update once support for this CMU exists */
+			clocks = <0>;
+			clock-names = "pclk";
+			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		cmu_hsi2: clock-controller@14400000 {
+			compatible = "google,gs101-cmu-hsi2";
+			reg = <0x14400000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&ext_24_5m>,
+				 <&cmu_top CLK_DOUT_CMU_HSI2_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_HSI2_PCIE>,
+				 <&cmu_top CLK_DOUT_CMU_HSI2_UFS_EMBD>,
+				 <&cmu_top CLK_DOUT_CMU_HSI2_MMC_CARD>;
+			clock-names = "oscclk", "bus", "pcie", "ufs", "mmc";
+		};
+
+		sysreg_hsi2: syscon@14420000 {
+			compatible = "google,gs101-hsi2-sysreg", "syscon";
+			reg = <0x14420000 0x10000>;
+			clocks = <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>;
+		};
+
+		pinctrl_hsi2: pinctrl@14440000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x14440000 0x00001000>;
+			clocks = <&cmu_hsi2 CLK_GOUT_HSI2_GPIO_HSI2_PCLK>;
+			clock-names = "pclk";
+			interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		ufs_0: ufs@14700000 {
+			compatible = "google,gs101-ufs";
+			reg = <0x14700000 0x200>,
+			      <0x14701100 0x200>,
+			      <0x14780000 0xa000>,
+			      <0x14600000 0x100>;
+			reg-names = "hci", "vs_hci", "unipro", "ufsp";
+			interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_ACLK>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_CLK_UNIPRO>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_FMP_CLK>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_ACLK>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_PCLK>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>;
+			clock-names = "core_clk", "sclk_unipro_main", "fmp",
+				      "aclk", "pclk", "sysreg";
+			dma-coherent;
+			freq-table-hz = <0 0>, <0 0>, <0 0>, <0 0>, <0 0>, <0 0>;
+			pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+			pinctrl-names = "default";
+			phys = <&ufs_0_phy>;
+			phy-names = "ufs-phy";
+			samsung,sysreg = <&sysreg_hsi2 0x710>;
+			status = "disabled";
+		};
+
+		ufs_0_phy: phy@14704000 {
+			compatible = "google,gs101-ufs-phy";
+			reg = <0x14704000 0x3000>;
+			reg-names = "phy-pma";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+			clocks = <&ext_24_5m>;
+			clock-names = "ref_clk";
+			status = "disabled";
+		};
+
+		cmu_apm: clock-controller@17400000 {
+			compatible = "google,gs101-cmu-apm";
+			reg = <0x17400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&ext_24_5m>;
+			clock-names = "oscclk";
+		};
+
+		sysreg_apm: syscon@174204e0 {
+			compatible = "google,gs101-apm-sysreg", "syscon";
+			reg = <0x174204e0 0x1000>;
+		};
+
+		pmu_system_controller: system-controller@17460000 {
+			compatible = "google,gs101-pmu", "syscon";
+			reg = <0x17460000 0x10000>;
+			google,pmu-intr-gen-syscon = <&pmu_intr_gen>;
+
+			poweroff: syscon-poweroff {
+				compatible = "syscon-poweroff";
+				offset = <0x3e9c>; /* PAD_CTRL_PWR_HOLD */
+				mask = <0x00000100>;
+				value = <0x0>;
+			};
+
+			reboot: syscon-reboot {
+				compatible = "google,gs101-reboot";
+			};
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x0810>; /* EXYNOS_PMU_SYSIP_DAT0 */
+				mode-bootloader = <0xfc>;
+				mode-charge = <0x0a>;
+				mode-dm-verity-device-corrupted = <0x50>;
+				mode-fastboot = <0xfa>;
+				mode-reboot-ab-update = <0x52>;
+				mode-recovery = <0xff>;
+				mode-rescue = <0xf9>;
+				mode-shutdown-thermal = <0x51>;
+				mode-shutdown-thermal-battery = <0x51>;
+			};
+		};
+
+		pmu_intr_gen: syscon@17470000 {
+			compatible = "google,gs101-pmu-intr-gen", "syscon";
+			reg = <0x17470000 0x10000>;
+		};
+
+		pinctrl_gpio_alive: pinctrl@174d0000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x174d0000 0x00001000>;
+			clocks = <&cmu_apm CLK_GOUT_APM_APBIF_GPIO_ALIVE_PCLK>;
+			clock-names = "pclk";
+
+			wakeup-interrupt-controller {
+				compatible = "google,gs101-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pinctrl_far_alive: pinctrl@174e0000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x174e0000 0x00001000>;
+			clocks = <&cmu_apm CLK_GOUT_APM_APBIF_GPIO_FAR_ALIVE_PCLK>;
+			clock-names = "pclk";
+
+			wakeup-interrupt-controller {
+				compatible = "google,gs101-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		ap2apm_mailbox: mailbox@17610000 {
+			compatible = "google,gs101-mbox";
+			reg = <0x17610000 0x1000>;
+			clocks = <&cmu_apm CLK_GOUT_APM_MAILBOX_APM_AP_PCLK>;
+			clock-names = "pclk";
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <0>;
+		};
+
+		pinctrl_gsactrl: pinctrl@17940000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x17940000 0x00001000>;
+			/* TODO: update once support for this CMU exists */
+			clocks = <0>;
+			clock-names = "pclk";
+		};
+
+		pinctrl_gsacore: pinctrl@17a80000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x17a80000 0x00001000>;
+			/* TODO: update once support for this CMU exists */
+			clocks = <0>;
+			clock-names = "pclk";
+			status = "disabled";
+		};
+
+		cmu_top: clock-controller@1e080000 {
+			compatible = "google,gs101-cmu-top";
+			reg = <0x1e080000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&ext_24_5m>;
+			clock-names = "oscclk";
+		};
+	};
+
+	apm_sram: sram@2039000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x2039000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x2039000 0x40000>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts =
+		   <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>;
+	};
+};
+
+#include "gs101-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 8bf7f7ecebaa..525ef180481d 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -5,33 +5,59 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-tqmls1012al-mbls1012al.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var1.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-tqmls1043a-mbls10xxa.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-tqmls1046a-mbls10xxa.dtb
+DTC_FLAGS_fsl-ls1088a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
+DTC_FLAGS_fsl-ls1088a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
+DTC_FLAGS_fsl-ls1088a-ten64 := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb
+DTC_FLAGS_fsl-ls1088a-tqmls1088a-mbls10xxa := -Wno-interrupt_map
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-tqmls1088a-mbls10xxa.dtb
+DTC_FLAGS_fsl-ls2080a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
+DTC_FLAGS_fsl-ls2080a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
+DTC_FLAGS_fsl-ls2081a-rdb := -Wno-interrupt_map
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb
+DTC_FLAGS_fsl-ls2080a-simu := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
+DTC_FLAGS_fsl-ls2088a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
+DTC_FLAGS_fsl-ls2088a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+DTC_FLAGS_fsl-lx2160a-bluebox3 := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3.dtb
+DTC_FLAGS_fsl-lx2160a-bluebox3-rev-a := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3-rev-a.dtb
+DTC_FLAGS_fsl-lx2160a-clearfog-cx := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb
+DTC_FLAGS_fsl-lx2160a-honeycomb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
+DTC_FLAGS_fsl-lx2160a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
+DTC_FLAGS_fsl-lx2160a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
+DTC_FLAGS_fsl-lx2162a-clearfog := -Wno-interrupt_map
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-clearfog.dtb
+DTC_FLAGS_fsl-lx2162a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb
 
 fsl-ls1028a-qds-13bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-13bb.dtbo
@@ -48,49 +74,224 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
 
+DTC_FLAGS_fsl-lx2160a-tqmlx2160a-mblx2160a := -Wno-interrupt_map
+fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-12-7-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-12-8-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-14-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo
+
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-8-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-7-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-11-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx8dx-colibri-aster.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8dx-colibri-eval-v3.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8dx-colibri-iris-v2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8dx-colibri-iris.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb
+
+imx8dxl-evk-pcie-ep-dtbs += imx8dxl-evk.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk-pcie-ep.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx8dxp-tqma8xdp-mba8xx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8dxp-tqma8xdps-mb-smarc-2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-emtop-baseboard.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-evkb.dtb
+
+imx8mm-evk-pcie-ep-dtbs += imx8mm-evk.dtb imx-pcie0-ep.dtbo
+imx8mm-evkb-pcie-ep-dtbs += imx8mm-evkb.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk-pcie-ep.dtb imx8mm-evkb-pcie-ep.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
-dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-iot-gateway.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-innocomm-wb15-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl-osm-s.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phg.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb
+
+imx8mm-phyboard-polis-peb-av-10-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phyboard-polis-peb-av-10.dtbo
+imx8mm-phyboard-polis-peb-eval-01-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phyboard-polis-peb-eval-01.dtbo
+imx8mm-phycore-no-eth-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phycore-no-eth.dtbo
+imx8mm-phycore-no-spiflash-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phycore-no-spiflash.dtbo
+imx8mm-phycore-rpmsg-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phycore-rpmsg.dtbo
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-peb-av-10.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-peb-eval-01.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phycore-no-eth.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phycore-no-spiflash.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phycore-rpmsg.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phygate-tauri-l.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-prt8mm.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw75xx-0x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7903.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-ivy.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-mallow.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-ivy.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-mallow.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-yavia.dtb
+
+imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33-dtbs += imx8mm-tqma8mqml-mba8mx.dtb imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-dimonoff-gateway-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr3l-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-rve-gateway.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
+
+imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33-dtbs += imx8mn-tqma8mqnl-mba8mx.dtb imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtbo
+imx8mn-tqma8mqnl-mba8mx-usbotg-dtbs += imx8mn-tqma8mqnl-mba8mx.dtb imx8mn-tqma8mqnl-mba8mx-usbotg.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx-usbotg.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-aristainetos3-adpismarc.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-aristainetos3-helios.dtb
+imx8mp-aristainetos3-helios-lvds-dtbs += imx8mp-aristainetos3-helios.dtb imx8mp-aristainetos3-helios-lvds.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-aristainetos3-helios-lvds.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-aristainetos3-proton2s.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-cubox-m.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-data-modul-edm-sbc.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-som-a-bmb-08.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-drc02.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-picoitx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-edm-g-wb.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-mate.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-pro.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-pulse.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-ripple.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-iota2-lumpy.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-bl-osm-s.dtb
+
+imx8mp-kontron-dl-dtbs += imx8mp-kontron-bl-osm-s.dtb imx8mp-kontron-dl.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-dl.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-smarc-eval-carrier.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-libra-rdk-fpsc.dtb
+imx8mp-libra-rdk-fpsc-lvds-dtbs += imx8mp-libra-rdk-fpsc.dtb imx8mp-libra-rdk-fpsc-lvds-etml1010g3dra.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-libra-rdk-fpsc-lvds.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-navqp.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-nitrogen-enc-carrier-board.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-nitrogen-smarc-universal-board.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
+imx8mp-phyboard-pollux-rdk-no-eth-dtbs += imx8mp-phyboard-pollux-rdk.dtb imx8mp-phycore-no-eth.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk-no-eth.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-basic.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-bd500.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-tian-g07017.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-toradex-smarc-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314.dtb
+
+imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10-dtbs += imx8mp-tx8p-ml81-moduline-display-106.dtb \
+	imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtbo
+imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17-dtbs += imx8mp-tx8p-ml81-moduline-display-106.dtb \
+	imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-ultra-mach-sbc.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-var-som-symphony.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw73xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw75xx-2x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw82xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-ivy.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-mallow.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-ivy.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb
+
+imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtbo
+imx8mp-evk-lvds0-imx-lvds-hdmi-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds0-imx-lvds-hdmi.dtbo
+imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtbo
+imx8mp-evk-lvds1-imx-lvds-hdmi-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds1-imx-lvds-hdmi.dtbo
+imx8mp-evk-mx8-dlvds-lcd1-dtbs += imx8mp-evk.dtb imx8mp-evk-mx8-dlvds-lcd1.dtbo
+imx8mp-evk-pcie-ep-dtbs += imx8mp-evk.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds0-imx-lvds-hdmi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds1-imx-lvds-hdmi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-mx8-dlvds-lcd1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-pcie-ep.dtb
+
+imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtbo
+imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtbo
+imx8mp-tqma8mpql-mba8mp-ras314-imx219-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtbo
+imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtbo
+imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33-imx219-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtbo imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33-imx219.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
+imx8mq-evk-pcie1-ep-dtbs += imx8mq-evk.dtb imx-pcie1-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk-pcie1-ep.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
@@ -105,31 +306,123 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
+
+imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33-dtbs += imx8mq-tqma8mq-mba8mx.dtb imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-eval.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-eval-v1.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-ixora-v1.1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval-v1.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
+
+imx8qm-mek-ov5640-csi0-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi0.dtbo
+dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-csi0.dtb
+imx8qm-mek-ov5640-csi1-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi1.dtbo
+dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-csi1.dtb
+imx8qm-mek-ov5640-dual-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi0.dtbo imx8qm-mek-ov5640-csi1.dtbo
+dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-dual.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-aster.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
+
+imx8qxp-mek-pcie-ep-dtbs += imx8qxp-mek.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek-pcie-ep.dtb
+
+imx8qxp-mek-ov5640-csi-dtbs := imx8qxp-mek.dtb imx8qxp-mek-ov5640-csi.dtbo
+dtb-${CONFIG_ARCH_MXC} += imx8qxp-mek-ov5640-csi.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqps-mb-smarc-2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8ulp-9x9-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx91-11x11-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx91-tqma9131-mba91xxca.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb
+
+imx93-9x9-qsb-i3c-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-i3c.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-i3c.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-14x14-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-kontron-bl-osm-s.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb
+
+imx93-phyboard-nash-peb-wlbt-07-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-peb-wlbt-07.dtbo
+imx93-phyboard-segin-peb-eval-01-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-eval-01.dtbo
+imx93-phyboard-segin-peb-wlbt-05-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-wlbt-05.dtbo
+imx93-phycore-rpmsg-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-segin.dtb imx93-phycore-rpmsg.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-peb-wlbt-07.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-eval-01.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-wlbt-05.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-rpmsg.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba91xxca.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-tqma9596sa-mb-smarc-2.dtb
+
+imx95-15x15-evk-pcie0-ep-dtbs = imx95-15x15-evk.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk-pcie0-ep.dtb
+imx95-19x19-evk-pcie0-ep-dtbs += imx95-19x19-evk.dtb imx-pcie0-ep.dtbo
+imx95-19x19-evk-pcie1-ep-dtbs += imx95-19x19-evk.dtb imx-pcie1-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-pcie0-ep.dtb imx95-19x19-evk-pcie1-ep.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-libra-rdk-fpsc.dtb
 
-imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-imx219.dtbo
+imx8mm-kontron-dl-dtbs			:= imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo
+imx8mm-kontron-bl-lte-dtbs		:= imx8mm-kontron-bl.dtb imx8mm-kontron-bl-lte.dtbo
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-dl.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl-lte.dtb
+
+imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
+imx8mm-venice-gw72xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
 imx8mm-venice-gw72xx-0x-rs232-rts-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo
 imx8mm-venice-gw72xx-0x-rs422-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs422.dtbo
 imx8mm-venice-gw72xx-0x-rs485-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs485.dtbo
 imx8mm-venice-gw73xx-0x-imx219-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-imx219.dtbo
+imx8mm-venice-gw73xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rpidsi.dtbo
 imx8mm-venice-gw73xx-0x-rs232-rts-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs232-rts.dtbo
 imx8mm-venice-gw73xx-0x-rs422-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs422.dtbo
 imx8mm-venice-gw73xx-0x-rs485-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs485.dtbo
+imx8mp-venice-gw74xx-imx219-dtbs	:= imx8mp-venice-gw74xx.dtb imx8mp-venice-gw74xx-imx219.dtbo
+imx8mp-venice-gw74xx-rpidsi-dtbs	:= imx8mp-venice-gw74xx.dtb imx8mp-venice-gw74xx-rpidsi.dtbo
 
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-imx219.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rpidsi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs232-rts.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs422.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs485.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-imx219.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rpidsi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs232-rts.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs422.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs485.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-imx219.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-rpidsi.dtb
+
+imx8mm-phygate-tauri-l-rs232-rs232-dtbs		:= imx8mm-phygate-tauri-l.dtb imx8mm-phygate-tauri-l-rs232-rs232.dtbo
+imx8mm-phygate-tauri-l-rs232-cts-rts-dtbs	:= imx8mm-phygate-tauri-l.dtb imx8mm-phygate-tauri-l-rs232-rts-cts.dtbo
+imx8mm-phygate-tauri-l-rs232-rs485-dtbs		:= imx8mm-phygate-tauri-l.dtb imx8mm-phygate-tauri-l-rs232-rs485.dtbo
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phygate-tauri-l-rs232-rs232.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phygate-tauri-l-rs232-cts-rts.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phygate-tauri-l-rs232-rs485.dtb
 
 dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb
 dtb-$(CONFIG_ARCH_S32) += s32g274a-rdb2.dtb
+dtb-$(CONFIG_ARCH_S32) += s32g399a-rdb3.dtb
 dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
index 2517528f684f..75081ce3e9a6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -20,6 +20,12 @@
 		clock-frequency = <25000000>;
 	};
 
+	sc16is7xx_clk: clock-sc16is7xx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
 	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
 		regulator-name = "1P8V";
@@ -69,12 +75,6 @@
 		clocks = <&sc16is7xx_clk>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-
-		sc16is7xx_clk: clock-sc16is7xx {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index 5a8d85a7d161..ce59b94d8c22 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -87,7 +87,7 @@
 	flash@2 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "en25s64", "jedec,spi-nor";
+		compatible = "jedec,spi-nor";
 		spi-cpol;
 		spi-cpha;
 		reg = <2>;
@@ -110,7 +110,7 @@
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dts
new file mode 100644
index 000000000000..07026b067320
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Matthias Schiffer
+ * Author: Max Merchel
+ */
+
+#include "fsl-ls1012a-tqmls1012al-mbls1012al.dts"
+
+&esdhc0 {
+	vqmmc-supply = <&reg_1v8>;
+	/delete-property/ no-mmc;
+	/delete-property/ sd-uhs-sdr12;
+	/delete-property/ sd-uhs-sdr25;
+	/delete-property/ sd-uhs-sdr50;
+	/delete-property/ sd-uhs-sdr104;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	no-sd;
+	voltage-ranges = <1800 1800>;
+	non-removable;
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al.dts
new file mode 100644
index 000000000000..e46cc1a07f0c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al.dts
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Matthias Schiffer
+ * Author: Max Merchel
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "fsl-ls1012a-tqmls1012al.dtsi"
+
+/ {
+	model = "TQ-Systems TQMLS1012AL on MBLS1012AL";
+	compatible = "tq,ls1012a-tqmls1012al-mbls1012al", "tq,ls1012a-tqmls1012al", "fsl,ls1012a";
+	chassis-type = "embedded";
+
+	aliases {
+		/* use MAC from U-Boot environment */
+		/* TODO: PFE */
+		ethernet2 = &swport0;
+		ethernet3 = &swport1;
+		ethernet4 = &swport2;
+		ethernet5 = &swport3;
+		serial0 = &duart0;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		stdout-path = &duart0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-1 {
+			label = "S2";
+			linux,code = <BTN_0>;
+			gpios = <&gpio_exp_3p3v 13 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-2 {
+			label = "X15";
+			linux,code = <BTN_1>;
+			gpios = <&gpio_exp_1p8v 5 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-3 {
+			label = "X16";
+			linux,code = <BTN_2>;
+			gpios = <&gpio_exp_1p8v 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio_exp_3p3v 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_exp_3p3v 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			/* 64 MiB */
+			size = <0 0x04000000>;
+			/*  512 - 128 MiB, our minimum RAM config will be 512 MiB */
+			alloc-ranges = <0 0x80000000 0 0x98000000>;
+			linux,cma-default;
+		};
+	};
+
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	reg_1p5v_pcie: regulator-1p5v-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_PCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio_exp_1p8v 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v5>;
+	};
+
+	reg_1p5v_wlan: regulator-1p5v-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_WLAN";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio_exp_1p8v 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v5>;
+	};
+
+	reg_1v8: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_3v3_pcie: regulator-3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_PCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio_exp_3p3v 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_3v3_wlan: regulator-3v3-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_WLAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio_exp_3p3v 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&esdhc0 {
+	vmmc-supply = <&reg_3v3>;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&i2c0 {
+	gpio_exp_3p3v: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-line-names = "", "", "GPIO_3V3_3", "",
+				  "", "", "", "",
+				  "", "GPIO_3V3_1", "GPIO_3V3_2", "",
+				  "", "", "", "";
+
+		wlan-disable-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "WLAN_DISABLE#";
+		};
+
+		pcie-rst-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PCIE_RST#";
+		};
+
+		wlan-rst-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "WLAN_RST#";
+		};
+
+		pcie-dis-hog {
+			gpio-hog;
+			gpios = <11 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PCIE_DIS#";
+		};
+
+		pcie-wake-hog {
+			gpio-hog;
+			gpios = <12 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "PCIE_WAKE#";
+		};
+	};
+
+	lm75_48: temperature-sensor@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+		vs-supply = <&reg_3v3>;
+	};
+
+	switch@5f {
+		compatible = "microchip,ksz9897";
+		reg = <0x5f>;
+		reset-gpios = <&gpio_exp_3p3v 7 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			swport0: port@0 {
+				reg = <0>;
+				label = "swp0";
+				phy-mode = "internal";
+			};
+
+			swport1: port@1 {
+				reg = <1>;
+				label = "swp1";
+				phy-mode = "internal";
+			};
+
+			swport2: port@2 {
+				reg = <2>;
+				label = "swp2";
+				phy-mode = "internal";
+			};
+
+			swport3: port@3 {
+				reg = <3>;
+				label = "swp3";
+				phy-mode = "internal";
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				/* TODO: PFE */
+				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <1500>;
+				tx-internal-delay-ps = <1500>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+
+	gpio_exp_1p8v: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_1v8>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-line-names = "PCIE_CLK_PD#", "PMIC_INT#", "ETH_SW_INT#", "",
+				  "", "", "", "",
+				  "", "GPIO_3V3_1", "GPIO_3V3_2", "",
+				  "", "", "", "";
+
+		/* do not change PCIE_CLK_PD */
+		pcie-clk-pd-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PCIE_CLK_PD#";
+		};
+
+		pmic-int-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "PMIC_INT#";
+		};
+
+		eth-sw-int-hog {
+			gpio-hog;
+			gpios = <2 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "ETH_SW_INT#";
+		};
+
+		eth-link-pwrdwn-hog {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "ETH_LINK_PWRDWN#";
+		};
+	};
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+/* TODO: PFE */
+
+&sata {
+	status = "okay";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio_exp_3p3v 6 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio_exp_3p3v 6 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al.dtsi
new file mode 100644
index 000000000000..7c5a3dee91b9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Matthias Schiffer
+ * Author: Max Merchel
+ */
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	compatible = "tq,ls1012a-tqmls1012al", "fsl,ls1012a";
+
+	memory@80000000 {
+		device_type = "memory";
+		/*  our minimum RAM config will be 512 MiB */
+		reg = <0x00000000 0x80000000 0 0x20000000>;
+	};
+
+	reg_vcc_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vcc_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	jc42_19: temperature-sensor@19 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x19>;
+	};
+
+	m24c64_50: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc_3v3>;
+	};
+
+	m24c02_51: eeprom@51 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc_3v3>;
+	};
+
+	rtc1: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <39000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		vcc-supply = <&reg_vcc_1v8>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index a863022529ac..fc3e138077b8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -74,26 +74,27 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
-			     <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
-			     <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
-			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	gic: interrupt-controller@1400000 {
 		compatible = "arm,gic-400";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
 		      <0x0 0x1402000 0 0x2000>, /* GICC */
 		      <0x0 0x1404000 0 0x2000>, /* GICH */
 		      <0x0 0x1406000 0 0x2000>; /* GICV */
-		interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	reboot {
@@ -156,15 +157,14 @@
 			status = "disabled";
 		};
 
-		esdhc0: esdhc@1560000 {
+		esdhc0: mmc@1560000 {
 			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
-			interrupts = <0 62 0x4>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
-			big-endian;
 			bus-width = <4>;
 			status = "disabled";
 		};
@@ -175,15 +175,14 @@
 			big-endian;
 		};
 
-		esdhc1: esdhc@1580000 {
+		esdhc1: mmc@1580000 {
 			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1580000 0x0 0x10000>;
-			interrupts = <0 65 0x4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
-			big-endian;
 			broken-cd;
 			bus-width = <4>;
 			status = "disabled";
@@ -290,7 +289,7 @@
 		dcfg: dcfg@1ee0000 {
 			compatible = "fsl,ls1012a-dcfg",
 				     "syscon";
-			reg = <0x0 0x1ee0000 0x0 0x10000>;
+			reg = <0x0 0x1ee0000 0x0 0x1000>;
 			big-endian;
 		};
 
@@ -305,70 +304,72 @@
 		tmu: tmu@1f00000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f00000 0x0 0x10000>;
-			interrupts = <0 33 0x4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
-			fsl,tmu-calibration = <0x00000000 0x00000025
-					       0x00000001 0x0000002c
-					       0x00000002 0x00000032
-					       0x00000003 0x00000039
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000046
-					       0x00000006 0x0000004c
-					       0x00000007 0x00000053
-					       0x00000008 0x00000059
-					       0x00000009 0x0000005f
-					       0x0000000a 0x00000066
-					       0x0000000b 0x0000006c
-
-					       0x00010000 0x00000026
-					       0x00010001 0x0000002d
-					       0x00010002 0x00000035
-					       0x00010003 0x0000003d
-					       0x00010004 0x00000045
-					       0x00010005 0x0000004d
-					       0x00010006 0x00000055
-					       0x00010007 0x0000005d
-					       0x00010008 0x00000065
-					       0x00010009 0x0000006d
-
-					       0x00020000 0x00000026
-					       0x00020001 0x00000030
-					       0x00020002 0x0000003a
-					       0x00020003 0x00000044
-					       0x00020004 0x0000004e
-					       0x00020005 0x00000059
-					       0x00020006 0x00000063
-
-					       0x00030000 0x00000014
-					       0x00030001 0x00000021
-					       0x00030002 0x0000002e
-					       0x00030003 0x0000003a
-					       0x00030004 0x00000047
-					       0x00030005 0x00000053
-					       0x00030006 0x00000060>;
-			big-endian;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000025>,
+					<0x00000001 0x0000002c>,
+					<0x00000002 0x00000032>,
+					<0x00000003 0x00000039>,
+					<0x00000004 0x0000003f>,
+					<0x00000005 0x00000046>,
+					<0x00000006 0x0000004c>,
+					<0x00000007 0x00000053>,
+					<0x00000008 0x00000059>,
+					<0x00000009 0x0000005f>,
+					<0x0000000a 0x00000066>,
+					<0x0000000b 0x0000006c>,
+
+					<0x00010000 0x00000026>,
+					<0x00010001 0x0000002d>,
+					<0x00010002 0x00000035>,
+					<0x00010003 0x0000003d>,
+					<0x00010004 0x00000045>,
+					<0x00010005 0x0000004d>,
+					<0x00010006 0x00000055>,
+					<0x00010007 0x0000005d>,
+					<0x00010008 0x00000065>,
+					<0x00010009 0x0000006d>,
+
+					<0x00020000 0x00000026>,
+					<0x00020001 0x00000030>,
+					<0x00020002 0x0000003a>,
+					<0x00020003 0x00000044>,
+					<0x00020004 0x0000004e>,
+					<0x00020005 0x00000059>,
+					<0x00020006 0x00000063>,
+
+					<0x00030000 0x00000014>,
+					<0x00030001 0x00000021>,
+					<0x00030002 0x0000002e>,
+					<0x00030003 0x0000003a>,
+					<0x00030004 0x00000047>,
+					<0x00030005 0x00000053>,
+					<0x00030006 0x00000060>;
 			#thermal-sensor-cells = <1>;
 		};
 
 		i2c0: i2c@2180000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1012a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
-			interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
+			scl-gpios = <&gpio0 2 0>;
 			status = "disabled";
 		};
 
 		i2c1: i2c@2190000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1012a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
-			interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
+			scl-gpios = <&gpio0 13 0>;
 			status = "disabled";
 		};
 
@@ -377,7 +378,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2100000 0x0 0x10000>;
-			interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
@@ -389,7 +390,7 @@
 		duart0: serial@21c0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0500 0x0 0x100>;
-			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
@@ -398,16 +399,16 @@
 		duart1: serial@21c0600 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0600 0x0 0x100>;
-			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};
 
 		gpio0: gpio@2300000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
-			interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -415,9 +416,9 @@
 		};
 
 		gpio1: gpio@2310000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
-			interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -428,7 +429,7 @@
 			compatible = "fsl,ls1012a-wdt",
 				     "fsl,imx21-wdt";
 			reg = <0x0 0x2ad0000 0x0 0x10000>;
-			interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>;
 			big-endian;
 		};
@@ -437,7 +438,7 @@
 			#sound-dai-cells = <0>;
 			compatible = "fsl,vf610-sai";
 			reg = <0x0 0x2b50000 0x0 0x10000>;
-			interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>,
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -447,9 +448,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 47>,
-			       <&edma0 1 46>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 46>,
+			       <&edma0 1 47>;
 			status = "disabled";
 		};
 
@@ -457,7 +458,7 @@
 			#sound-dai-cells = <0>;
 			compatible = "fsl,vf610-sai";
 			reg = <0x0 0x2b60000 0x0 0x10000>;
-			interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>,
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -467,9 +468,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 45>,
-			       <&edma0 1 44>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 44>,
+			       <&edma0 1 45>;
 			status = "disabled";
 		};
 
@@ -479,8 +480,8 @@
 			reg = <0x0 0x2c00000 0x0 0x10000>,
 			      <0x0 0x2c10000 0x0 0x10000>,
 			      <0x0 0x2c20000 0x0 0x10000>;
-			interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "edma-tx", "edma-err";
 			dma-channels = <32>;
 			big-endian;
@@ -494,7 +495,7 @@
 		usb0: usb@2f00000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x2f00000 0x0 0x10000>;
-			interrupts = <0 60 0x4>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
@@ -506,7 +507,7 @@
 			reg = <0x0 0x3200000 0x0 0x10000>,
 				<0x0 0x20140520 0x0 0x4>;
 			reg-names = "ahci", "sata-ecc";
-			interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			dma-coherent;
@@ -516,7 +517,7 @@
 		usb1: usb@8600000 {
 			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 			reg = <0x0 0x8600000 0x0 0x1000>;
-			interrupts = <0 139 0x4>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			phy_type = "ulpi";
 		};
@@ -525,7 +526,7 @@
 			compatible = "fsl,ls1012a-msi";
 			reg = <0x0 0x1572000 0x0 0x8>;
 			msi-controller;
-			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pcie1: pcie@3400000 {
@@ -533,13 +534,12 @@
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 118 0x4>, /* controller interrupt */
-				     <0 117 0x4>; /* PME interrupt */
-			interrupt-names = "aer", "pme";
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			num-viewport = <2>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
@@ -550,16 +550,17 @@
 					<0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
 			status = "disabled";
 		};
 
-		rcpm: power-controller@1ee2140 {
+		rcpm: wakeup-controller@1ee2140 {
 			compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1ee2140 0x0 0x4>;
 			#fsl,rcpm-wakeup-cells = <1>;
 		};
 
-		ftm_alarm0: timer@29d0000 {
+		ftm_alarm0: rtc@29d0000 {
 			compatible = "fsl,ls1012a-ftm-alarm";
 			reg = <0x0 0x29d0000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x20000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index 6b575efd84a7..af9194eca556 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -56,6 +56,14 @@
 };
 
 &enetc_port2 {
+	nvmem-cells = <&base_mac_address 2>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&enetc_port3 {
+	nvmem-cells = <&base_mac_address 3>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -76,6 +84,8 @@
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy0>;
 	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 4>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -84,6 +94,8 @@
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy1>;
 	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 5>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -92,6 +104,8 @@
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy2>;
 	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 6>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -100,11 +114,16 @@
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy3>;
 	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 7>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
 &mscc_felix_port4 {
-	ethernet = <&enetc_port2>;
+	status = "okay";
+};
+
+&mscc_felix_port5 {
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
index 7cd29ab970d9..1f34c7553459 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
@@ -55,5 +55,7 @@
 &enetc_port1 {
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
index 330e34f933a3..aac41192caa1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -36,6 +36,14 @@
 };
 
 &enetc_port2 {
+	nvmem-cells = <&base_mac_address 2>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&enetc_port3 {
+	nvmem-cells = <&base_mac_address 3>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -48,6 +56,8 @@
 	managed = "in-band-status";
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -56,10 +66,15 @@
 	managed = "in-band-status";
 	phy-handle = <&phy1>;
 	phy-mode = "sgmii";
+	nvmem-cells = <&base_mac_address 1>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
 &mscc_felix_port4 {
-	ethernet = <&enetc_port2>;
+	status = "okay";
+};
+
+&mscc_felix_port5 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
index ed4e69e87e30..1d53b529af88 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
-#include "fsl-ls1028a-kontron-sl28.dts"
+#include "fsl-ls1028a-kontron-sl28-var3.dts"
 
 / {
 	model = "Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier";
@@ -19,13 +19,18 @@
 
 	pwm-fan {
 		compatible = "pwm-fan";
-		cooling-min-state = <0>;
-		cooling-max-state = <3>;
 		#cooling-cells = <2>;
 		pwms = <&sl28cpld_pwm0 0 4000000>;
 		cooling-levels = <1 128 192 255>;
 	};
 
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	sound {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -107,6 +112,11 @@
 		clock-names = "mclk";
 		assigned-clocks = <&mclk>;
 		assigned-clock-rates = <1250000>;
+		AVDD-supply = <&reg_3p3v>;
+		CPVDD-supply = <&reg_3p3v>;
+		DBVDD-supply = <&reg_3p3v>;
+		DCVDD-supply = <&reg_3p3v>;
+		MICVDD-supply = <&reg_3p3v>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3.dts
new file mode 100644
index 000000000000..08851ca407a8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 3 which has one ethernet ports.
+ *
+ * Copyright (C) 2024 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+	model = "Kontron SMARC-sAL28 (Single PHY)";
+	compatible = "kontron,sl28-var3", "kontron,sl28", "fsl,ls1028a";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
index 9b5e92fb753e..a4421db3784e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -43,5 +43,7 @@
 &enetc_port1 {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
+	nvmem-cells = <&base_mac_address 1>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 4ab17b984b03..8b65af4a7147 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -92,6 +92,8 @@
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
 	managed = "in-band-status";
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -154,6 +156,21 @@
 				label = "bootloader environment";
 			};
 		};
+
+		otp-1 {
+			compatible = "user-otp";
+
+			nvmem-layout {
+				compatible = "kontron,sl28-vpd";
+
+				serial_number: serial-number {
+				};
+
+				base_mac_address: base-mac-address {
+					#nvmem-cell-cells = <1>;
+				};
+			};
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso
index f826392c23fa..f826392c23fa 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
deleted file mode 100644
index 40d34c8384a5..000000000000
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree fragment for LS1028A QDS board, serdes 69xx
- *
- * Copyright 2019-2021 NXP
- *
- * Requires a LS1028A QDS board with lane B rework.
- * Requires a SCH-30842 card in slot 1 and a SCH-28021 card in slot 2.
- */
-
-/dts-v1/;
-/plugin/;
-
-&mdio_slot1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	slot1_sgmii: ethernet-phy@2 {
-		/* AQR112 */
-		reg = <0x2>;
-		compatible = "ethernet-phy-ieee802.3-c45";
-	};
-};
-
-&enetc_port0 {
-	phy-handle = <&slot1_sgmii>;
-	phy-mode = "2500base-x";
-	managed = "in-band-status";
-	status = "okay";
-};
-
-&mdio_slot2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	/* 4 ports on VSC8514 */
-	slot2_qsgmii0: ethernet-phy@8 {
-		reg = <0x8>;
-	};
-
-	slot2_qsgmii1: ethernet-phy@9 {
-		reg = <0x9>;
-	};
-
-	slot2_qsgmii2: ethernet-phy@a {
-		reg = <0xa>;
-	};
-
-	slot2_qsgmii3: ethernet-phy@b {
-		reg = <0xb>;
-	};
-};
-
-&mscc_felix_ports {
-	port@0 {
-		status = "okay";
-		phy-handle = <&slot2_qsgmii0>;
-		phy-mode = "qsgmii";
-		managed = "in-band-status";
-	};
-
-	port@1 {
-		status = "okay";
-		phy-handle = <&slot2_qsgmii1>;
-		phy-mode = "qsgmii";
-		managed = "in-band-status";
-	};
-
-	port@2 {
-		status = "okay";
-		phy-handle = <&slot2_qsgmii2>;
-		phy-mode = "qsgmii";
-		managed = "in-band-status";
-	};
-
-	port@3 {
-		status = "okay";
-		phy-handle = <&slot2_qsgmii3>;
-		phy-mode = "qsgmii";
-		managed = "in-band-status";
-	};
-};
-
-&mscc_felix {
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dtso b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dtso
new file mode 100644
index 000000000000..b949cac03742
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dtso
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 69xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-30842 card in slot 1 and a SCH-28021 card in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	slot1_sgmii: ethernet-phy@2 {
+		/* AQR112 */
+		reg = <0x2>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+};
+
+&enetc_port0 {
+	phy-handle = <&slot1_sgmii>;
+	phy-mode = "2500base-x";
+	status = "okay";
+};
+
+&mdio_slot2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 4 ports on VSC8514 */
+	slot2_qsgmii0: ethernet-phy@8 {
+		reg = <0x8>;
+	};
+
+	slot2_qsgmii1: ethernet-phy@9 {
+		reg = <0x9>;
+	};
+
+	slot2_qsgmii2: ethernet-phy@a {
+		reg = <0xa>;
+	};
+
+	slot2_qsgmii3: ethernet-phy@b {
+		reg = <0xb>;
+	};
+};
+
+&mscc_felix_ports {
+	port@0 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii0>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii1>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii2>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+
+	port@3 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii3>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtso
index 1dff68d7484b..1dff68d7484b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtso
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dtso
index 19424d349713..19424d349713 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dtso
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dtso
index fb85847f778f..fb85847f778f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dtso
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtso
index 63e46fad22bd..63e46fad22bd 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtso
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index e0cd1516d05b..757a34ba7da3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -29,6 +29,9 @@
 		ethernet3 = &mscc_felix_port1;
 		ethernet4 = &mscc_felix_port2;
 		ethernet5 = &mscc_felix_port3;
+		ethernet6 = &mscc_felix_port4;
+		ethernet7 = &mscc_felix_port5;
+		ethernet8 = &enetc_port3;
 	};
 
 	chosen {
@@ -151,6 +154,10 @@
 	status = "okay";
 };
 
+&enetc_port3 {
+	status = "okay";
+};
+
 &esdhc {
 	sd-uhs-sdr104;
 	sd-uhs-sdr50;
@@ -194,6 +201,37 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			/* Atmel AT24C512C-XHDB: 64 KB EEPROM */
+			eeprom@50 {
+				compatible = "atmel,24c512";
+				reg = <0x50>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			/* AT24C04C 512-byte DDR4 SPD EEPROM */
+			/* Documentation says 0x51, but must be even and i2cdetect says 0x52 */
+			eeprom@52 {
+				compatible = "atmel,24c04";
+				reg = <0x52>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			/* Atmel AT24C02C-XHMB: 256-byte EEPROM */
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+		};
+
 		i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -278,7 +316,10 @@
 };
 
 &mscc_felix_port4 {
-	ethernet = <&enetc_port2>;
+	status = "okay";
+};
+
+&mscc_felix_port5 {
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 5627dd7734f3..7d172d7e5737 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -28,6 +28,12 @@
 			reg = <0x0>;
 			enable-method = "psci";
 			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
 			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_PW20>;
 			#cooling-cells = <2>;
@@ -39,6 +45,12 @@
 			reg = <0x1>;
 			enable-method = "psci";
 			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
 			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_PW20>;
 			#cooling-cells = <2>;
@@ -46,6 +58,11 @@
 
 		l2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
 		};
 	};
 
@@ -95,13 +112,6 @@
 		};
 	};
 
-	reboot {
-		compatible = "syscon-reboot";
-		regmap = <&rst>;
-		offset = <0>;
-		mask = <0x02>;
-	};
-
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
@@ -130,15 +140,16 @@
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
 					 IRQ_TYPE_LEVEL_LOW)>;
-		its: gic-its@6020000 {
+		its: msi-controller@6020000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
+			#msi-cells = <1>;
 			reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */
 		};
 	};
 
 	thermal-zones {
-		ddr-controller {
+		ddr-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
@@ -158,7 +169,7 @@
 			};
 		};
 
-		core-cluster {
+		cluster-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -218,10 +229,16 @@
 			};
 		};
 
-		rst: syscon@1e60000 {
-			compatible = "syscon";
+		syscon@1e60000 {
+			compatible = "fsl,ls1028a-reset", "syscon", "simple-mfd";
 			reg = <0x0 0x1e60000 0x0 0x10000>;
 			little-endian;
+
+			reboot {
+				compatible = "syscon-reboot";
+				offset = <0>;
+				mask = <0x02>;
+			};
 		};
 
 		sfp: efuse@1e80000 {
@@ -364,7 +381,6 @@
 			dmas = <&edma0 0 62>, <&edma0 0 60>;
 			dma-names = "tx", "rx";
 			spi-num-chipselects = <4>;
-			little-endian;
 			status = "disabled";
 		};
 
@@ -380,7 +396,6 @@
 			dmas = <&edma0 0 58>, <&edma0 0 56>;
 			dma-names = "tx", "rx";
 			spi-num-chipselects = <4>;
-			little-endian;
 			status = "disabled";
 		};
 
@@ -396,7 +411,6 @@
 			dmas = <&edma0 0 54>, <&edma0 0 2>;
 			dma-names = "tx", "rx";
 			spi-num-chipselects = <3>;
-			little-endian;
 			status = "disabled";
 		};
 
@@ -645,7 +659,7 @@
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
@@ -657,7 +671,7 @@
 		};
 
 		pcie_ep1: pcie-ep@3400000 {
-			compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
+			compatible = "fsl,ls1028a-pcie-ep";
 			reg = <0x00 0x03400000 0x0 0x00100000
 			       0x80 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
@@ -684,7 +698,7 @@
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
@@ -696,7 +710,7 @@
 		};
 
 		pcie_ep2: pcie-ep@3500000 {
-			compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
+			compatible = "fsl,ls1028a-pcie-ep";
 			reg = <0x00 0x03500000 0x0 0x00100000
 			       0x88 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
@@ -712,6 +726,7 @@
 			reg = <0 0x5000000 0 0x800000>;
 			#global-interrupts = <8>;
 			#iommu-cells = <1>;
+			dma-coherent;
 			stream-match-mask = <0x7c00>;
 			/* global secure fault */
 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -810,6 +825,7 @@
 				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "qdma-error", "qdma-queue0",
 				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			#dma-cells = <1>;
 			dma-channels = <8>;
 			block-number = <1>;
 			block-offset = <0x10000>;
@@ -841,8 +857,8 @@
 		malidp0: display@f080000 {
 			compatible = "arm,mali-dp500";
 			reg = <0x0 0xf080000 0x0 0x10000>;
-			interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "DE", "SE";
 			clocks = <&dpclk>,
 				 <&clockgen QORIQ_CLK_HWACCEL 2>,
@@ -884,9 +900,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 4>,
-			       <&edma0 1 3>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 3>,
+			       <&edma0 1 4>;
 			fsl,sai-asynchronous;
 			status = "disabled";
 		};
@@ -905,9 +921,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 6>,
-			       <&edma0 1 5>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 5>,
+			       <&edma0 1 6>;
 			fsl,sai-asynchronous;
 			status = "disabled";
 		};
@@ -926,9 +942,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 8>,
-			       <&edma0 1 7>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 7>,
+			       <&edma0 1 8>;
 			fsl,sai-asynchronous;
 			status = "disabled";
 		};
@@ -947,9 +963,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 10>,
-			       <&edma0 1 9>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 9>,
+			       <&edma0 1 10>;
 			fsl,sai-asynchronous;
 			status = "disabled";
 		};
@@ -968,9 +984,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 12>,
-			       <&edma0 1 11>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 11>,
+			       <&edma0 1 12>;
 			fsl,sai-asynchronous;
 			status = "disabled";
 		};
@@ -989,9 +1005,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 14>,
-			       <&edma0 1 13>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 13>,
+			       <&edma0 1 14>;
 			fsl,sai-asynchronous;
 			status = "disabled";
 		};
@@ -1006,51 +1022,52 @@
 		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
-			interrupts = <0 23 0x4>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
-			fsl,tmu-calibration = <0x00000000 0x00000024
-					       0x00000001 0x0000002b
-					       0x00000002 0x00000031
-					       0x00000003 0x00000038
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000045
-					       0x00000006 0x0000004c
-					       0x00000007 0x00000053
-					       0x00000008 0x00000059
-					       0x00000009 0x00000060
-					       0x0000000a 0x00000066
-					       0x0000000b 0x0000006d
-
-					       0x00010000 0x0000001c
-					       0x00010001 0x00000024
-					       0x00010002 0x0000002c
-					       0x00010003 0x00000035
-					       0x00010004 0x0000003d
-					       0x00010005 0x00000045
-					       0x00010006 0x0000004d
-					       0x00010007 0x00000055
-					       0x00010008 0x0000005e
-					       0x00010009 0x00000066
-					       0x0001000a 0x0000006e
-
-					       0x00020000 0x00000018
-					       0x00020001 0x00000022
-					       0x00020002 0x0000002d
-					       0x00020003 0x00000038
-					       0x00020004 0x00000043
-					       0x00020005 0x0000004d
-					       0x00020006 0x00000058
-					       0x00020007 0x00000063
-					       0x00020008 0x0000006e
-
-					       0x00030000 0x00000010
-					       0x00030001 0x0000001c
-					       0x00030002 0x00000029
-					       0x00030003 0x00000036
-					       0x00030004 0x00000042
-					       0x00030005 0x0000004f
-					       0x00030006 0x0000005b
-					       0x00030007 0x00000068>;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000024>,
+					<0x00000001 0x0000002b>,
+					<0x00000002 0x00000031>,
+					<0x00000003 0x00000038>,
+					<0x00000004 0x0000003f>,
+					<0x00000005 0x00000045>,
+					<0x00000006 0x0000004c>,
+					<0x00000007 0x00000053>,
+					<0x00000008 0x00000059>,
+					<0x00000009 0x00000060>,
+					<0x0000000a 0x00000066>,
+					<0x0000000b 0x0000006d>,
+
+					<0x00010000 0x0000001c>,
+					<0x00010001 0x00000024>,
+					<0x00010002 0x0000002c>,
+					<0x00010003 0x00000035>,
+					<0x00010004 0x0000003d>,
+					<0x00010005 0x00000045>,
+					<0x00010006 0x0000004d>,
+					<0x00010007 0x00000055>,
+					<0x00010008 0x0000005e>,
+					<0x00010009 0x00000066>,
+					<0x0001000a 0x0000006e>,
+
+					<0x00020000 0x00000018>,
+					<0x00020001 0x00000022>,
+					<0x00020002 0x0000002d>,
+					<0x00020003 0x00000038>,
+					<0x00020004 0x00000043>,
+					<0x00020005 0x0000004d>,
+					<0x00020006 0x00000058>,
+					<0x00020007 0x00000063>,
+					<0x00020008 0x0000006e>,
+
+					<0x00030000 0x00000010>,
+					<0x00030001 0x0000001c>,
+					<0x00030002 0x00000029>,
+					<0x00030003 0x00000036>,
+					<0x00030004 0x00000042>,
+					<0x00030005 0x0000004f>,
+					<0x00030006 0x0000005b>,
+					<0x00030007 0x00000068>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
@@ -1060,7 +1077,7 @@
 			reg = <0x01 0xf0000000 0x0 0x100000>;
 			#address-cells = <3>;
 			#size-cells = <2>;
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			device_type = "pci";
 			bus-range = <0x0 0x0>;
 			dma-coherent;
@@ -1080,21 +1097,25 @@
 				  0xc2000000 0x1 0xf8230000  0x1 0xf8230000  0x0 0x020000
 				  /* BAR4 (PF5) - non-prefetchable memory */
 				  0x82000000 0x1 0xfc000000  0x1 0xfc000000  0x0 0x400000>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 
 			enetc_port0: ethernet@0,0 {
-				compatible = "fsl,enetc";
+				compatible = "pci1957,e100", "fsl,enetc";
 				reg = <0x000000 0 0 0 0>;
 				status = "disabled";
 			};
 
 			enetc_port1: ethernet@0,1 {
-				compatible = "fsl,enetc";
+				compatible = "pci1957,e100", "fsl,enetc";
 				reg = <0x000100 0 0 0 0>;
 				status = "disabled";
 			};
 
 			enetc_port2: ethernet@0,2 {
-				compatible = "fsl,enetc";
+				compatible = "pci1957,e100", "fsl,enetc";
 				reg = <0x000200 0 0 0 0>;
 				phy-mode = "internal";
 				status = "disabled";
@@ -1107,14 +1128,14 @@
 			};
 
 			enetc_mdio_pf3: mdio@0,3 {
-				compatible = "fsl,enetc-mdio";
+				compatible = "pci1957,ee01", "fsl,enetc-mdio";
 				reg = <0x000300 0 0 0 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
 
 			ethernet@0,4 {
-				compatible = "fsl,enetc-ptp";
+				compatible = "pci1957,ee02", "fsl,enetc-ptp";
 				reg = <0x000400 0 0 0 0>;
 				clocks = <&clockgen QORIQ_CLK_HWACCEL 3>;
 				little-endian;
@@ -1124,7 +1145,7 @@
 			mscc_felix: ethernet-switch@0,5 {
 				reg = <0x000500 0 0 0 0>;
 				/* IEP INT_B */
-				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <2>;
 				status = "disabled";
 
 				mscc_felix_ports: ports {
@@ -1156,6 +1177,7 @@
 					mscc_felix_port4: port@4 {
 						reg = <4>;
 						phy-mode = "internal";
+						ethernet = <&enetc_port2>;
 						status = "disabled";
 
 						fixed-link {
@@ -1168,6 +1190,7 @@
 					mscc_felix_port5: port@5 {
 						reg = <5>;
 						phy-mode = "internal";
+						ethernet = <&enetc_port3>;
 						status = "disabled";
 
 						fixed-link {
@@ -1180,7 +1203,7 @@
 			};
 
 			enetc_port3: ethernet@0,6 {
-				compatible = "fsl,enetc";
+				compatible = "pci1957,e100", "fsl,enetc";
 				reg = <0x000600 0 0 0 0>;
 				phy-mode = "internal";
 				status = "disabled";
@@ -1195,7 +1218,7 @@
 			rcec@1f,0 {
 				reg = <0x00f800 0 0 0 0>;
 				/* IEP INT_A */
-				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <1>;
 			};
 		};
 
@@ -1293,14 +1316,14 @@
 			status = "disabled";
 		};
 
-		rcpm: power-controller@1e34040 {
+		rcpm: wakeup-controller@1e34040 {
 			compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1e34040 0x0 0x1c>;
 			#fsl,rcpm-wakeup-cells = <7>;
 			little-endian;
 		};
 
-		ftm_alarm0: timer@2800000 {
+		ftm_alarm0: rtc@2800000 {
 			compatible = "fsl,ls1028a-ftm-alarm";
 			reg = <0x0 0x2800000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
@@ -1308,7 +1331,7 @@
 			status = "disabled";
 		};
 
-		ftm_alarm1: timer@2810000 {
+		ftm_alarm1: rtc@2810000 {
 			compatible = "fsl,ls1028a-ftm-alarm";
 			reg = <0x0 0x2810000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
index d237162a8744..ca7cd7a33c01 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
@@ -24,9 +24,13 @@
 
 	/* these aliases provide the FMan ports mapping */
 	enet0: ethernet@e0000 {
+		pcs-handle-names = "qsgmii";
 	};
 
 	enet1: ethernet@e2000 {
+		pcsphy-handle = <&pcsphy1>, <&qsgmiib_pcs1>;
+		pcs-handle = <&pcsphy1>, <&qsgmiib_pcs1>;
+		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
 	enet2: ethernet@e4000 {
@@ -36,11 +40,34 @@
 	};
 
 	enet4: ethernet@e8000 {
+		pcsphy-handle = <&pcsphy4>, <&qsgmiib_pcs2>;
+		pcs-handle = <&pcsphy4>, <&qsgmiib_pcs2>;
+		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
 	enet5: ethernet@ea000 {
+		pcsphy-handle = <&pcsphy5>, <&qsgmiib_pcs3>;
+		pcs-handle = <&pcsphy5>, <&qsgmiib_pcs3>;
+		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
 	enet6: ethernet@f0000 {
 	};
+
+	mdio@e1000 {
+		qsgmiib_pcs1: ethernet-pcs@1 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x1>;
+		};
+
+		qsgmiib_pcs2: ethernet-pcs@2 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x2>;
+		};
+
+		qsgmiib_pcs3: ethernet-pcs@3 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x3>;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index fea167d222cf..e850551b16ac 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -3,7 +3,7 @@
  * Device Tree Include file for Freescale Layerscape-1043A family SoC.
  *
  * Copyright 2014-2015 Freescale Semiconductor, Inc.
- * Copyright 2018 NXP
+ * Copyright 2018-2021 NXP
  *
  * Mingkai Hu <Mingkai.hu@freescale.com>
  */
@@ -24,6 +24,22 @@
 		serial1 = &duart1;
 		serial2 = &duart2;
 		serial3 = &duart3;
+		sgmii-riser-s1-p1 = &sgmii_phy_s1_p1;
+		sgmii-riser-s2-p1 = &sgmii_phy_s2_p1;
+		sgmii-riser-s3-p1 = &sgmii_phy_s3_p1;
+		sgmii-riser-s4-p1 = &sgmii_phy_s4_p1;
+		qsgmii-s1-p1 = &qsgmii_phy_s1_p1;
+		qsgmii-s1-p2 = &qsgmii_phy_s1_p2;
+		qsgmii-s1-p3 = &qsgmii_phy_s1_p3;
+		qsgmii-s1-p4 = &qsgmii_phy_s1_p4;
+		qsgmii-s2-p1 = &qsgmii_phy_s2_p1;
+		qsgmii-s2-p2 = &qsgmii_phy_s2_p2;
+		qsgmii-s2-p3 = &qsgmii_phy_s2_p3;
+		qsgmii-s2-p4 = &qsgmii_phy_s2_p4;
+		emi1-slot1 = &ls1043mdio_s1;
+		emi1-slot2 = &ls1043mdio_s2;
+		emi1-slot3 = &ls1043mdio_s3;
+		emi1-slot4 = &ls1043mdio_s4;
 	};
 
 	chosen {
@@ -48,7 +64,7 @@
 		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0x0 0x0 0x8000000>;
 		big-endian;
@@ -62,15 +78,18 @@
 	};
 
 	fpga: board-control@2,0 {
-		compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
+		compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis", "simple-mfd";
 		reg = <0x2 0x0 0x0000100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 2 0 0x100>;
 	};
 };
 
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
@@ -153,3 +172,153 @@
 };
 
 #include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+	ethernet@e0000 {
+		phy-handle = <&qsgmii_phy_s2_p1>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@e2000 {
+		phy-handle = <&qsgmii_phy_s2_p2>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e6000 {
+		phy-handle = <&rgmii_phy2>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&qsgmii_phy_s2_p3>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&qsgmii_phy_s2_p4>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@f0000 { /* DTSEC9/10GEC1 */
+		fixed-link = <1 1 10000 0 0>;
+		phy-connection-type = "xgmii";
+	};
+};
+
+&fpga {
+	mdio-mux@54 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x54 1>;    /* BRDCFG4 */
+		mux-mask = <0xe0>; /* EMI1 */
+
+		/* On-board RGMII1 PHY */
+		ls1043mdio0: mdio@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy1: ethernet-phy@1 { /* MAC3 */
+				reg = <0x1>;
+			};
+		};
+
+		/* On-board RGMII2 PHY */
+		ls1043mdio1: mdio@20 {
+			reg = <0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy2: ethernet-phy@2 { /* MAC4 */
+				reg = <0x2>;
+			};
+		};
+
+		/* Slot 1 */
+		ls1043mdio_s1: mdio@40 {
+			reg = <0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			qsgmii_phy_s1_p1: ethernet-phy@4 {
+				reg = <0x4>;
+			};
+
+			qsgmii_phy_s1_p2: ethernet-phy@5 {
+				reg = <0x5>;
+			};
+
+			qsgmii_phy_s1_p3: ethernet-phy@6 {
+				reg = <0x6>;
+			};
+
+			qsgmii_phy_s1_p4: ethernet-phy@7 {
+				reg = <0x7>;
+			};
+
+			sgmii_phy_s1_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+
+		/* Slot 2 */
+		ls1043mdio_s2: mdio@60 {
+			reg = <0x60>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			qsgmii_phy_s2_p1: ethernet-phy@8 {
+				reg = <0x8>;
+			};
+
+			qsgmii_phy_s2_p2: ethernet-phy@9 {
+				reg = <0x9>;
+			};
+
+			qsgmii_phy_s2_p3: ethernet-phy@a {
+				reg = <0xa>;
+			};
+
+			qsgmii_phy_s2_p4: ethernet-phy@b {
+				reg = <0xb>;
+			};
+
+			sgmii_phy_s2_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+
+		/* Slot 3 */
+		ls1043mdio_s3: mdio@80 {
+			reg = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgmii_phy_s3_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+
+		/* Slot 4 */
+		ls1043mdio_s4: mdio@a0 {
+			reg = <0xa0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgmii_phy_s4_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index b290605e92cf..c4532c809f0a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -29,23 +29,33 @@
 
 &i2c0 {
 	status = "okay";
+
 	ina220@40 {
 		compatible = "ti,ina220";
 		reg = <0x40>;
 		shunt-resistor = <1000>;
 	};
+
 	adt7461a@4c {
 		compatible = "adi,adt7461";
 		reg = <0x4c>;
 	};
+
+	rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+
 	eeprom@52 {
 		compatible = "atmel,24c512";
 		reg = <0x52>;
 	};
+
 	eeprom@53 {
 		compatible = "atmel,24c512";
 		reg = <0x53>;
 	};
+
 	rtc@68 {
 		compatible = "pericom,pt7c4338";
 		reg = <0x68>;
@@ -61,7 +71,7 @@
 		  0x1 0x0 0x0 0x7e800000 0x00010000
 		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
 
-		nor@0,0 {
+		flash@0,0 {
 			compatible = "cfi-flash";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -94,6 +104,12 @@
 		compatible = "n25q128a13", "jedec,spi-nor";  /* 16MB */
 		reg = <0>;
 		spi-max-frequency = <1000000>; /* input clock */
+		/*
+		 * Standard CS timing properties replace the deprecated vendor
+		 * variants below.
+		 */
+		spi-cs-setup-delay-ns = <100>;
+		spi-cs-hold-delay-ns = <100>;
 		fsl,spi-cs-sck-delay = <100>;
 		fsl,spi-sck-cs-delay = <100>;
 	};
@@ -102,6 +118,12 @@
 		compatible = "maxim,ds26522";
 		reg = <2>;
 		spi-max-frequency = <2000000>;
+		/*
+		 * Standard CS timing properties replace the deprecated vendor
+		 * variants below.
+		 */
+		spi-cs-setup-delay-ns = <100>;
+		spi-cs-hold-delay-ns = <50>;
 		fsl,spi-cs-sck-delay = <100>;
 		fsl,spi-sck-cs-delay = <50>;
 	};
@@ -110,6 +132,12 @@
 		compatible = "maxim,ds26522";
 		reg = <3>;
 		spi-max-frequency = <2000000>;
+		/*
+		 * Standard CS timing properties replace the deprecated vendor
+		 * variants below.
+		 */
+		spi-cs-setup-delay-ns = <100>;
+		spi-cs-hold-delay-ns = <50>;
 		fsl,spi-cs-sck-delay = <100>;
 		fsl,spi-sck-cs-delay = <50>;
 	};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
new file mode 100644
index 000000000000..e04483fdb908
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "fsl-ls1043a-tqmls1043a.dtsi"
+#include "tqmls10xxa-mbls10xxa.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH LS1043A TQMLS1043A SoM on MBLS10xxA board";
+	compatible = "tq,ls1043a-tqmls1043a-mbls10xxa", "tq,ls1043a-tqmls1043a",
+		     "fsl,ls1043a";
+
+	aliases {
+		qsgmii-s1-p1 = &qsgmii1_phy1;
+		qsgmii-s1-p2 = &qsgmii1_phy2;
+		qsgmii-s1-p3 = &qsgmii1_phy3;
+		qsgmii-s1-p4 = &qsgmii1_phy4;
+		qsgmii-s2-p1 = &qsgmii2_phy1;
+		qsgmii-s2-p2 = &qsgmii2_phy2;
+		qsgmii-s2-p3 = &qsgmii2_phy3;
+		qsgmii-s2-p4 = &qsgmii2_phy4;
+		serial0 = &duart0;
+		serial1 = &duart1;
+	};
+
+	chosen {
+		stdout-path = &duart1;
+	};
+};
+
+&esdhc {
+	cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+};
+
+&sfp1 {
+	status = "okay";
+};
+
+&sfp1_i2c {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+#include "fsl-ls1043-post.dtsi"
+#include "tqmls104xa-mbls10xxa-fman.dtsi"
+
+&enet6 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi
new file mode 100644
index 000000000000..257d90bb9c20
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for LS1043A based SoM of TQ
+ */
+
+#include "fsl-ls1043a.dtsi"
+#include "tqmls10xxa.dtsi"
+
+&qspi {
+	num-cs = <2>;
+	status = "okay";
+
+	qflash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <62500000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_vcc1v8>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index ca3d5a90d6d4..73315c517039 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
 #include <dt-bindings/thermal/thermal.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	compatible = "fsl,ls1043a";
@@ -83,6 +84,8 @@
 
 		l2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -151,7 +154,7 @@
 	};
 
 	thermal-zones {
-		ddr-controller {
+		ddr-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
@@ -171,7 +174,7 @@
 			};
 		};
 
-		serdes {
+		serdes-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -191,7 +194,7 @@
 			};
 		};
 
-		fman {
+		fman-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 2>;
@@ -211,7 +214,7 @@
 			};
 		};
 
-		core-cluster {
+		cluster-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
@@ -242,7 +245,7 @@
 			};
 		};
 
-		sec {
+		sec-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 4>;
@@ -265,19 +268,19 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0xf08>, /* Physical Secure PPI */
-			     <1 14 0xf08>, /* Physical Non-Secure PPI */
-			     <1 11 0xf08>, /* Virtual PPI */
-			     <1 10 0xf08>; /* Hypervisor PPI */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		fsl,erratum-a008585;
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <0 106 0x4>,
-			     <0 107 0x4>,
-			     <0 95 0x4>,
-			     <0 97 0x4>;
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>,
 				     <&cpu1>,
 				     <&cpu2>,
@@ -286,13 +289,14 @@
 
 	gic: interrupt-controller@1400000 {
 		compatible = "arm,gic-400";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
 		      <0x0 0x1402000 0 0x2000>, /* GICC */
 		      <0x0 0x1404000 0 0x2000>, /* GICH */
 		      <0x0 0x1406000 0 0x2000>; /* GICV */
-		interrupts = <1 9 0xf08>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	soc: soc {
@@ -300,6 +304,8 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+		dma-coherent;
 
 		clockgen: clocking@1ee1000 {
 			compatible = "fsl,ls1043a-clockgen";
@@ -347,7 +353,7 @@
 			#size-cells = <1>;
 			ranges = <0x0 0x00 0x1700000 0x100000>;
 			reg = <0x00 0x1700000 0x0 0x100000>;
-			interrupts = <0 75 0x4>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			dma-coherent;
 
 			sec_jr0: jr@10000 {
@@ -355,7 +361,7 @@
 					     "fsl,sec-v5.0-job-ring",
 					     "fsl,sec-v4.0-job-ring";
 				reg = <0x10000 0x10000>;
-				interrupts = <0 71 0x4>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			sec_jr1: jr@20000 {
@@ -363,7 +369,7 @@
 					     "fsl,sec-v5.0-job-ring",
 					     "fsl,sec-v4.0-job-ring";
 				reg = <0x20000 0x10000>;
-				interrupts = <0 72 0x4>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			sec_jr2: jr@30000 {
@@ -371,7 +377,7 @@
 					     "fsl,sec-v5.0-job-ring",
 					     "fsl,sec-v4.0-job-ring";
 				reg = <0x30000 0x10000>;
-				interrupts = <0 73 0x4>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			sec_jr3: jr@40000 {
@@ -379,7 +385,7 @@
 					     "fsl,sec-v5.0-job-ring",
 					     "fsl,sec-v4.0-job-ring";
 				reg = <0x40000 0x10000>;
-				interrupts = <0 74 0x4>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -393,14 +399,14 @@
 
 		dcfg: dcfg@1ee0000 {
 			compatible = "fsl,ls1043a-dcfg", "syscon";
-			reg = <0x0 0x1ee0000 0x0 0x10000>;
+			reg = <0x0 0x1ee0000 0x0 0x1000>;
 			big-endian;
 		};
 
 		ifc: memory-controller@1530000 {
 			compatible = "fsl,ifc";
 			reg = <0x0 0x1530000 0x0 0x10000>;
-			interrupts = <0 43 0x4>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		qspi: spi@1550000 {
@@ -410,7 +416,7 @@
 			reg = <0x0 0x1550000 0x0 0x10000>,
 				<0x0 0x40000000 0x0 0x4000000>;
 			reg-names = "QuadSPI", "QuadSPI-memory";
-			interrupts = <0 99 0x4>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "qspi_en", "qspi";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>,
@@ -419,69 +425,68 @@
 			status = "disabled";
 		};
 
-		esdhc: esdhc@1560000 {
+		esdhc: mmc@1560000 {
 			compatible = "fsl,ls1043a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
-			interrupts = <0 62 0x4>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
-			big-endian;
 			bus-width = <4>;
 		};
 
 		ddr: memory-controller@1080000 {
 			compatible = "fsl,qoriq-memory-controller";
 			reg = <0x0 0x1080000 0x0 0x1000>;
-			interrupts = <0 144 0x4>;
-			big-endian;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		tmu: tmu@1f00000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f00000 0x0 0x10000>;
-			interrupts = <0 33 0x4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
-			fsl,tmu-calibration = <0x00000000 0x00000023
-					       0x00000001 0x0000002a
-					       0x00000002 0x00000031
-					       0x00000003 0x00000037
-					       0x00000004 0x0000003e
-					       0x00000005 0x00000044
-					       0x00000006 0x0000004b
-					       0x00000007 0x00000051
-					       0x00000008 0x00000058
-					       0x00000009 0x0000005e
-					       0x0000000a 0x00000065
-					       0x0000000b 0x0000006b
-
-					       0x00010000 0x00000023
-					       0x00010001 0x0000002b
-					       0x00010002 0x00000033
-					       0x00010003 0x0000003b
-					       0x00010004 0x00000043
-					       0x00010005 0x0000004b
-					       0x00010006 0x00000054
-					       0x00010007 0x0000005c
-					       0x00010008 0x00000064
-					       0x00010009 0x0000006c
-
-					       0x00020000 0x00000021
-					       0x00020001 0x0000002c
-					       0x00020002 0x00000036
-					       0x00020003 0x00000040
-					       0x00020004 0x0000004b
-					       0x00020005 0x00000055
-					       0x00020006 0x0000005f
-
-					       0x00030000 0x00000013
-					       0x00030001 0x0000001d
-					       0x00030002 0x00000028
-					       0x00030003 0x00000032
-					       0x00030004 0x0000003d
-					       0x00030005 0x00000047
-					       0x00030006 0x00000052
-					       0x00030007 0x0000005c>;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000023>,
+					<0x00000001 0x0000002a>,
+					<0x00000002 0x00000031>,
+					<0x00000003 0x00000037>,
+					<0x00000004 0x0000003e>,
+					<0x00000005 0x00000044>,
+					<0x00000006 0x0000004b>,
+					<0x00000007 0x00000051>,
+					<0x00000008 0x00000058>,
+					<0x00000009 0x0000005e>,
+					<0x0000000a 0x00000065>,
+					<0x0000000b 0x0000006b>,
+
+					<0x00010000 0x00000023>,
+					<0x00010001 0x0000002b>,
+					<0x00010002 0x00000033>,
+					<0x00010003 0x0000003b>,
+					<0x00010004 0x00000043>,
+					<0x00010005 0x0000004b>,
+					<0x00010006 0x00000054>,
+					<0x00010007 0x0000005c>,
+					<0x00010008 0x00000064>,
+					<0x00010009 0x0000006c>,
+
+					<0x00020000 0x00000021>,
+					<0x00020001 0x0000002c>,
+					<0x00020002 0x00000036>,
+					<0x00020003 0x00000040>,
+					<0x00020004 0x0000004b>,
+					<0x00020005 0x00000055>,
+					<0x00020006 0x0000005f>,
+
+					<0x00030000 0x00000013>,
+					<0x00030001 0x0000001d>,
+					<0x00030002 0x00000028>,
+					<0x00030003 0x00000032>,
+					<0x00030004 0x0000003d>,
+					<0x00030005 0x00000047>,
+					<0x00030006 0x00000052>,
+					<0x00030007 0x0000005c>;
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -499,11 +504,11 @@
 			memory-region = <&bman_fbpr>;
 		};
 
-		bportals: bman-portals@508000000 {
+		bportals: bman-portals-bus@508000000 {
 			ranges = <0x0 0x5 0x08000000 0x8000000>;
 		};
 
-		qportals: qman-portals@500000000 {
+		qportals: qman-portals-bus@500000000 {
 			ranges = <0x0 0x5 0x00000000 0x8000000>;
 		};
 
@@ -512,21 +517,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2100000 0x0 0x10000>;
-			interrupts = <0 64 0x4>;
-			clock-names = "dspi";
-			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
-					    QORIQ_CLK_PLL_DIV(1)>;
-			spi-num-chipselects = <5>;
-			big-endian;
-			status = "disabled";
-		};
-
-		dspi1: spi@2110000 {
-			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0x2110000 0x0 0x10000>;
-			interrupts = <0 65 0x4>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
@@ -536,12 +527,12 @@
 		};
 
 		i2c0: i2c@2180000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
-			interrupts = <0 56 0x4>;
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			dmas = <&edma0 1 38>,
@@ -551,45 +542,57 @@
 		};
 
 		i2c1: i2c@2190000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
-			interrupts = <0 57 0x4>;
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
+			scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 36>,
+			       <&edma0 1 37>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		i2c2: i2c@21a0000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x21a0000 0x0 0x10000>;
-			interrupts = <0 58 0x4>;
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
+			scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 34>,
+			       <&edma0 1 35>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		i2c3: i2c@21b0000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x21b0000 0x0 0x10000>;
-			interrupts = <0 59 0x4>;
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
+			scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 40>,
+			       <&edma0 1 41>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		duart0: serial@21c0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0500 0x0 0x100>;
-			interrupts = <0 54 0x4>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
@@ -597,7 +600,7 @@
 		duart1: serial@21c0600 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0600 0x0 0x100>;
-			interrupts = <0 54 0x4>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
@@ -605,7 +608,7 @@
 		duart2: serial@21d0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x0 0x21d0500 0x0 0x100>;
-			interrupts = <0 55 0x4>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
@@ -613,7 +616,7 @@
 		duart3: serial@21d0600 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x0 0x21d0600 0x0 0x100>;
-			interrupts = <0 55 0x4>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
@@ -621,7 +624,7 @@
 		gpio1: gpio@2300000 {
 			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
-			interrupts = <0 66 0x4>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -631,7 +634,7 @@
 		gpio2: gpio@2310000 {
 			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
-			interrupts = <0 67 0x4>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -641,7 +644,7 @@
 		gpio3: gpio@2320000 {
 			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
-			interrupts = <0 68 0x4>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -651,14 +654,14 @@
 		gpio4: gpio@2330000 {
 			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
-			interrupts = <0 134 0x4>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
 
-		uqe: uqe@2400000 {
+		uqe: uqe-bus@2400000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,qe", "simple-bus";
@@ -672,7 +675,6 @@
 			qeic: qeic@80 {
 				compatible = "fsl,qe-ic";
 				reg = <0x80 0x80>;
-				#address-cells = <0>;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
@@ -680,16 +682,12 @@
 			};
 
 			si1: si@700 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				compatible = "fsl,ls1043-qe-si",
 						"fsl,t1040-qe-si";
 				reg = <0x700 0x80>;
 			};
 
 			siram1: siram@1000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
 				compatible = "fsl,ls1043-qe-siram",
 						"fsl,t1040-qe-siram";
 				reg = <0x1000 0x800>;
@@ -726,69 +724,86 @@
 		lpuart0: serial@2950000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2950000 0x0 0x1000>;
-			interrupts = <0 48 0x4>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_SYSCLK 0>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 32>,
+			       <&edma0 1 33>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		lpuart1: serial@2960000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2960000 0x0 0x1000>;
-			interrupts = <0 49 0x4>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 30>,
+			       <&edma0 1 31>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		lpuart2: serial@2970000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2970000 0x0 0x1000>;
-			interrupts = <0 50 0x4>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 28>,
+			       <&edma0 1 29>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		lpuart3: serial@2980000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2980000 0x0 0x1000>;
-			interrupts = <0 51 0x4>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 26>,
+			       <&edma0 1 27>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		lpuart4: serial@2990000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2990000 0x0 0x1000>;
-			interrupts = <0 52 0x4>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 24>,
+			       <&edma0 1 25>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		lpuart5: serial@29a0000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x29a0000 0x0 0x1000>;
-			interrupts = <0 53 0x4>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 22>,
+			       <&edma0 1 23>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		wdog0: watchdog@2ad0000 {
 			compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
 			reg = <0x0 0x2ad0000 0x0 0x10000>;
-			interrupts = <0 83 0x4>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
-			clock-names = "wdog";
 			big-endian;
 		};
 
@@ -798,8 +813,8 @@
 			reg = <0x0 0x2c00000 0x0 0x10000>,
 			      <0x0 0x2c10000 0x0 0x10000>,
 			      <0x0 0x2c20000 0x0 0x10000>;
-			interrupts = <0 103 0x4>,
-				     <0 103 0x4>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "edma-tx", "edma-err";
 			dma-channels = <32>;
 			big-endian;
@@ -810,69 +825,80 @@
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
 
-		usb0: usb@2f00000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0x2f00000 0x0 0x10000>;
-			interrupts = <0 60 0x4>;
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-			status = "disabled";
-		};
+		aux_bus: bus {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			compatible = "simple-bus";
+			ranges;
+			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
+
+			usb0: usb@2f00000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x2f00000 0x0 0x10000>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				usb3-lpm-capable;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
 
-		usb1: usb@3000000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0x3000000 0x0 0x10000>;
-			interrupts = <0 61 0x4>;
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-			status = "disabled";
-		};
+			usb1: usb@3000000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3000000 0x0 0x10000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				usb3-lpm-capable;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
 
-		usb2: usb@3100000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0x3100000 0x0 0x10000>;
-			interrupts = <0 63 0x4>;
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-			status = "disabled";
-		};
+			usb2: usb@3100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3100000 0x0 0x10000>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				usb3-lpm-capable;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
 
-		sata: sata@3200000 {
-			compatible = "fsl,ls1043a-ahci";
-			reg = <0x0 0x3200000 0x0 0x10000>,
-				<0x0 0x20140520 0x0 0x4>;
-			reg-names = "ahci", "sata-ecc";
-			interrupts = <0 69 0x4>;
-			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
-					    QORIQ_CLK_PLL_DIV(1)>;
-			dma-coherent;
+			sata: sata@3200000 {
+				compatible = "fsl,ls1043a-ahci";
+				reg = <0x0 0x3200000 0x0 0x10000>,
+					<0x0 0x20140520 0x0 0x4>;
+				reg-names = "ahci", "sata-ecc";
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+						    QORIQ_CLK_PLL_DIV(1)>;
+				dma-coherent;
+			};
 		};
 
 		msi1: msi-controller1@1571000 {
 			compatible = "fsl,ls1043a-msi";
 			reg = <0x0 0x1571000 0x0 0x8>;
 			msi-controller;
-			interrupts = <0 116 0x4>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		msi2: msi-controller2@1572000 {
 			compatible = "fsl,ls1043a-msi";
 			reg = <0x0 0x1572000 0x0 0x8>;
 			msi-controller;
-			interrupts = <0 126 0x4>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		msi3: msi-controller3@1573000 {
 			compatible = "fsl,ls1043a-msi";
 			reg = <0x0 0x1573000 0x0 0x8>;
 			msi-controller;
-			interrupts = <0 160 0x4>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pcie1: pcie@3400000 {
@@ -880,13 +906,12 @@
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 118 0x4>, /* controller interrupt */
-				     <0 117 0x4>; /* PME interrupt */
-			interrupt-names = "intr", "pme";
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			dma-coherent;
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -898,6 +923,8 @@
 					<0000 0 0 2 &gic 0 111 0x4>,
 					<0000 0 0 3 &gic 0 112 0x4>,
 					<0000 0 0 4 &gic 0 113 0x4>;
+			fsl,pcie-scfg = <&scfg 0>;
+			big-endian;
 			status = "disabled";
 		};
 
@@ -906,13 +933,12 @@
 			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
 			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 128 0x4>,
-				     <0 127 0x4>;
-			interrupt-names = "intr", "pme";
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			dma-coherent;
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -924,6 +950,8 @@
 					<0000 0 0 2 &gic 0 121 0x4>,
 					<0000 0 0 3 &gic 0 122 0x4>,
 					<0000 0 0 4 &gic 0 123 0x4>;
+			fsl,pcie-scfg = <&scfg 1>;
+			big-endian;
 			status = "disabled";
 		};
 
@@ -932,13 +960,12 @@
 			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
 			      <0x50 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 162 0x4>,
-				     <0 161 0x4>;
-			interrupt-names = "intr", "pme";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			dma-coherent;
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -950,11 +977,13 @@
 					<0000 0 0 2 &gic 0 155 0x4>,
 					<0000 0 0 3 &gic 0 156 0x4>,
 					<0000 0 0 4 &gic 0 157 0x4>;
+			fsl,pcie-scfg = <&scfg 2>;
+			big-endian;
 			status = "disabled";
 		};
 
 		qdma: dma-controller@8380000 {
-			compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma";
+			compatible = "fsl,ls1043a-qdma", "fsl,ls1021a-qdma";
 			reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
 			      <0x0 0x8390000 0x0 0x10000>, /* Status regs */
 			      <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
@@ -965,6 +994,7 @@
 				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "qdma-error", "qdma-queue0",
 				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			#dma-cells = <1>;
 			dma-channels = <8>;
 			block-number = <1>;
 			block-offset = <0x10000>;
@@ -974,13 +1004,13 @@
 			big-endian;
 		};
 
-		rcpm: power-controller@1ee2140 {
+		rcpm: wakeup-controller@1ee2140 {
 			compatible = "fsl,ls1043a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1ee2140 0x0 0x4>;
 			#fsl,rcpm-wakeup-cells = <1>;
 		};
 
-		ftm_alarm0: timer@29d0000 {
+		ftm_alarm0: rtc@29d0000 {
 			compatible = "fsl,ls1043a-ftm-alarm";
 			reg = <0x0 0x29d0000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x20000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
index d6caaea57d90..15ff7c569d28 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
@@ -23,6 +23,9 @@
 &fman0 {
 	/* these aliases provide the FMan ports mapping */
 	enet0: ethernet@e0000 {
+		pcsphy-handle = <&qsgmiib_pcs3>;
+		pcs-handle = <&qsgmiib_pcs3>;
+		pcs-handle-names = "qsgmii";
 	};
 
 	enet1: ethernet@e2000 {
@@ -35,14 +38,40 @@
 	};
 
 	enet4: ethernet@e8000 {
+		pcsphy-handle = <&pcsphy4>, <&qsgmiib_pcs1>;
+		pcs-handle = <&pcsphy4>, <&qsgmiib_pcs1>;
+		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
 	enet5: ethernet@ea000 {
+		pcsphy-handle = <&pcsphy5>, <&pcsphy5>;
+		pcs-handle = <&pcsphy5>, <&pcsphy5>;
+		pcs-handle-names = "sgmii", "qsgmii";
 	};
 
 	enet6: ethernet@f0000 {
 	};
 
 	enet7: ethernet@f2000 {
+		pcsphy-handle = <&pcsphy7>, <&qsgmiib_pcs2>, <&pcsphy7>;
+		pcs-handle = <&pcsphy7>, <&qsgmiib_pcs2>, <&pcsphy7>;
+		pcs-handle-names = "sgmii", "qsgmii", "xfi";
+	};
+
+	mdio@eb000 {
+		qsgmiib_pcs1: ethernet-pcs@1 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x1>;
+		};
+
+		qsgmiib_pcs2: ethernet-pcs@2 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x2>;
+		};
+
+		qsgmiib_pcs3: ethernet-pcs@3 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x3>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index eec62c63dafe..736722b58e77 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -3,7 +3,7 @@
  * Device Tree Include file for Freescale Layerscape-1046A family SoC.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
- * Copyright 2018 NXP
+ * Copyright 2018-2019 NXP
  *
  * Shaohui Xie <Shaohui.Xie@nxp.com>
  */
@@ -17,14 +17,26 @@
 	compatible = "fsl,ls1046a-qds", "fsl,ls1046a";
 
 	aliases {
+		emi1-slot1 = &ls1046mdio_s1;
+		emi1-slot2 = &ls1046mdio_s2;
+		emi1-slot4 = &ls1046mdio_s4;
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
 		gpio2 = &gpio2;
 		gpio3 = &gpio3;
+		qsgmii-s2-p1 = &qsgmii_phy_s2_p1;
+		qsgmii-s2-p2 = &qsgmii_phy_s2_p2;
+		qsgmii-s2-p3 = &qsgmii_phy_s2_p3;
+		qsgmii-s2-p4 = &qsgmii_phy_s2_p4;
 		serial0 = &duart0;
 		serial1 = &duart1;
 		serial2 = &duart2;
 		serial3 = &duart3;
+		sgmii-s1-p1 = &sgmii_phy_s1_p1;
+		sgmii-s1-p2 = &sgmii_phy_s1_p2;
+		sgmii-s1-p3 = &sgmii_phy_s1_p3;
+		sgmii-s1-p4 = &sgmii_phy_s1_p4;
+		sgmii-s4-p1 = &sgmii_phy_s4_p1;
 	};
 
 	chosen {
@@ -57,7 +69,7 @@
 	flash@2 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "en25s64", "jedec,spi-nor";
+		compatible = "jedec,spi-nor";
 		spi-cpol;
 		spi-cpha;
 		reg = <2>;
@@ -76,7 +88,7 @@
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
@@ -139,7 +151,7 @@
 		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0x0 0x0 0x8000000>;
 		big-endian;
@@ -153,8 +165,9 @@
 	};
 
 	fpga: board-control@2,0 {
-		compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis";
+		compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis", "simple-mfd";
 		reg = <0x2 0x0 0x0000100>;
+		ranges = <0 2 0 0x100>;
 	};
 };
 
@@ -169,7 +182,7 @@
 		compatible = "spansion,m25p80";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		spi-max-frequency = <20000000>;
+		spi-max-frequency = <50000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
 		reg = <0>;
@@ -177,3 +190,141 @@
 };
 
 #include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+	ethernet@e0000 {
+		phy-handle = <&qsgmii_phy_s2_p1>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@e2000 {
+		phy-handle = <&sgmii_phy_s4_p1>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e6000 {
+		phy-handle = <&rgmii_phy2>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&sgmii_phy_s1_p3>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&sgmii_phy_s1_p4>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@f0000 { /* DTSEC9/10GEC1 */
+		phy-handle = <&sgmii_phy_s1_p1>;
+		phy-connection-type = "xgmii";
+	};
+
+	ethernet@f2000 { /* DTSEC10/10GEC2 */
+		phy-handle = <&sgmii_phy_s1_p2>;
+		phy-connection-type = "xgmii";
+	};
+};
+
+&fpga {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	mdio-mux@54 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x54 1>;    /* BRDCFG4 */
+		mux-mask = <0xe0>; /* EMI1 */
+
+		/* On-board RGMII1 PHY */
+		ls1046mdio0: mdio@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy1: ethernet-phy@1 { /* MAC3 */
+				reg = <0x1>;
+			};
+		};
+
+		/* On-board RGMII2 PHY */
+		ls1046mdio1: mdio@1 {
+			reg = <0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy2: ethernet-phy@2 { /* MAC4 */
+				reg = <0x2>;
+			};
+		};
+
+		/* Slot 1 */
+		ls1046mdio_s1: mdio@2 {
+			reg = <0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgmii_phy_s1_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			sgmii_phy_s1_p2: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			sgmii_phy_s1_p3: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			sgmii_phy_s1_p4: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		/* Slot 2 */
+		ls1046mdio_s2: mdio@3 {
+			reg = <0x60>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			qsgmii_phy_s2_p1: ethernet-phy@8 {
+				reg = <0x8>;
+			};
+
+			qsgmii_phy_s2_p2: ethernet-phy@9 {
+				reg = <0x9>;
+			};
+
+			qsgmii_phy_s2_p3: ethernet-phy@a {
+				reg = <0xa>;
+			};
+
+			qsgmii_phy_s2_p4: ethernet-phy@b {
+				reg = <0xb>;
+			};
+		};
+
+		/* Slot 4 */
+		ls1046mdio_s4: mdio@5 {
+			reg = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgmii_phy_s4_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 7025aad8ae89..07f6cc6e354a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -153,8 +153,8 @@
 	};
 
 	ethernet@f2000 { /* 10GEC2 */
-		fixed-link = <0 1 1000 0 0>;
-		phy-connection-type = "xgmii";
+		phy-connection-type = "10gbase-r";
+		managed = "in-band-status";
 	};
 
 	mdio@fc000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts
new file mode 100644
index 000000000000..43261cda3fcf
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "fsl-ls1046a-tqmls1046a.dtsi"
+#include "tqmls10xxa-mbls10xxa.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH LS1046A TQMLS1046A SoM on MBLS10xxA board";
+	compatible = "tq,ls1046a-tqmls1046a-mbls10xxa", "tq,ls1046a-tqmls1046a",
+		     "fsl,ls1046a";
+
+	aliases {
+		qsgmii-s1-p1 = &qsgmii1_phy1;
+		qsgmii-s1-p2 = &qsgmii1_phy2;
+		qsgmii-s1-p3 = &qsgmii1_phy3;
+		qsgmii-s1-p4 = &qsgmii1_phy4;
+		qsgmii-s2-p1 = &qsgmii2_phy1;
+		qsgmii-s2-p2 = &qsgmii2_phy2;
+		qsgmii-s2-p3 = &qsgmii2_phy3;
+		qsgmii-s2-p4 = &qsgmii2_phy4;
+		serial0 = &duart0;
+		serial1 = &duart1;
+	};
+
+	chosen {
+		stdout-path = &duart1;
+	};
+};
+
+&dspi {
+	status = "okay";
+};
+
+&esdhc {
+	cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+};
+
+&sfp1 {
+	status = "okay";
+};
+
+&sfp2 {
+	status = "okay";
+};
+
+&sfp1_i2c {
+	status = "okay";
+};
+
+&sfp2_i2c {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+#include "fsl-ls1046-post.dtsi"
+#include "tqmls104xa-mbls10xxa-fman.dtsi"
+
+&enet6 {
+	status = "okay";
+};
+
+&enet7 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi
new file mode 100644
index 000000000000..fa543db99def
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for LS1046A based SoM of TQ
+ */
+
+#include "fsl-ls1046a.dtsi"
+#include "tqmls10xxa.dtsi"
+
+&qspi {
+	num-cs = <2>;
+	status = "okay";
+
+	qflash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <62500000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_vcc1v8>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+
+	qflash1: flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <62500000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_vcc1v8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index feab604322cf..770d91ef0310 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	compatible = "fsl,ls1046a";
@@ -78,6 +79,8 @@
 
 		l2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -119,7 +122,7 @@
 	};
 
 	thermal-zones {
-		ddr-controller {
+		ddr-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
@@ -139,7 +142,7 @@
 			};
 		};
 
-		serdes {
+		serdes-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -159,7 +162,7 @@
 			};
 		};
 
-		fman {
+		fman-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 2>;
@@ -179,7 +182,7 @@
 			};
 		};
 
-		core-cluster {
+		cluster-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
@@ -210,7 +213,7 @@
 			};
 		};
 
-		sec {
+		sec-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 4>;
@@ -257,6 +260,7 @@
 
 	gic: interrupt-controller@1400000 {
 		compatible = "arm,gic-400";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x1410000 0 0x10000>, /* GICD */
@@ -272,12 +276,13 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+		dma-coherent;
 
 		ddr: memory-controller@1080000 {
 			compatible = "fsl,qoriq-memory-controller";
 			reg = <0x0 0x1080000 0x0 0x1000>;
 			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-			big-endian;
 		};
 
 		ifc: memory-controller@1530000 {
@@ -303,14 +308,13 @@
 			status = "disabled";
 		};
 
-		esdhc: esdhc@1560000 {
+		esdhc: mmc@1560000 {
 			compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
-			big-endian;
 			bus-width = <4>;
 		};
 
@@ -354,7 +358,6 @@
 			ranges = <0x0 0x00 0x1700000 0x100000>;
 			reg = <0x00 0x1700000 0x0 0x100000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			dma-coherent;
 
 			sec_jr0: jr@10000 {
 				compatible = "fsl,sec-v5.4-job-ring",
@@ -405,11 +408,11 @@
 
 		};
 
-		qportals: qman-portals@500000000 {
+		qportals: qman-portals-bus@500000000 {
 			ranges = <0x0 0x5 0x00000000 0x8000000>;
 		};
 
-		bportals: bman-portals@508000000 {
+		bportals: bman-portals-bus@508000000 {
 			ranges = <0x0 0x5 0x08000000 0x8000000>;
 		};
 
@@ -437,51 +440,50 @@
 		tmu: tmu@1f00000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f00000 0x0 0x10000>;
-			interrupts = <0 33 0x4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000023
-				0x00000001 0x00000029
-				0x00000002 0x0000002f
-				0x00000003 0x00000036
-				0x00000004 0x0000003c
-				0x00000005 0x00000042
-				0x00000006 0x00000049
-				0x00000007 0x0000004f
-				0x00000008 0x00000055
-				0x00000009 0x0000005c
-				0x0000000a 0x00000062
-				0x0000000b 0x00000068
+				<0x00000000 0x00000023>,
+				<0x00000001 0x00000029>,
+				<0x00000002 0x0000002f>,
+				<0x00000003 0x00000036>,
+				<0x00000004 0x0000003c>,
+				<0x00000005 0x00000042>,
+				<0x00000006 0x00000049>,
+				<0x00000007 0x0000004f>,
+				<0x00000008 0x00000055>,
+				<0x00000009 0x0000005c>,
+				<0x0000000a 0x00000062>,
+				<0x0000000b 0x00000068>,
 				/* Calibration data group 2 */
-				0x00010000 0x00000022
-				0x00010001 0x0000002a
-				0x00010002 0x00000032
-				0x00010003 0x0000003a
-				0x00010004 0x00000042
-				0x00010005 0x0000004a
-				0x00010006 0x00000052
-				0x00010007 0x0000005a
-				0x00010008 0x00000062
-				0x00010009 0x0000006a
+				<0x00010000 0x00000022>,
+				<0x00010001 0x0000002a>,
+				<0x00010002 0x00000032>,
+				<0x00010003 0x0000003a>,
+				<0x00010004 0x00000042>,
+				<0x00010005 0x0000004a>,
+				<0x00010006 0x00000052>,
+				<0x00010007 0x0000005a>,
+				<0x00010008 0x00000062>,
+				<0x00010009 0x0000006a>,
 				/* Calibration data group 3 */
-				0x00020000 0x00000021
-				0x00020001 0x0000002b
-				0x00020002 0x00000035
-				0x00020003 0x0000003e
-				0x00020004 0x00000048
-				0x00020005 0x00000052
-				0x00020006 0x0000005c
+				<0x00020000 0x00000021>,
+				<0x00020001 0x0000002b>,
+				<0x00020002 0x00000035>,
+				<0x00020003 0x0000003e>,
+				<0x00020004 0x00000048>,
+				<0x00020005 0x00000052>,
+				<0x00020006 0x0000005c>,
 				/* Calibration data group 4 */
-				0x00030000 0x00000011
-				0x00030001 0x0000001a
-				0x00030002 0x00000024
-				0x00030003 0x0000002e
-				0x00030004 0x00000038
-				0x00030005 0x00000042
-				0x00030006 0x0000004c
-				0x00030007 0x00000056>;
-			big-endian;
+				<0x00030000 0x00000011>,
+				<0x00030001 0x0000001a>,
+				<0x00030002 0x00000024>,
+				<0x00030003 0x0000002e>,
+				<0x00030004 0x00000038>,
+				<0x00030005 0x00000042>,
+				<0x00030006 0x0000004c>,
+				<0x00030007 0x00000056>;
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -500,7 +502,7 @@
 		};
 
 		i2c0: i2c@2180000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
@@ -514,35 +516,47 @@
 		};
 
 		i2c1: i2c@2190000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
+			scl-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 36>,
+			       <&edma0 1 37>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		i2c2: i2c@21a0000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x21a0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
+			scl-gpios = <&gpio3 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 34>,
+			       <&edma0 1 35>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		i2c3: i2c@21b0000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x21b0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
+			scl-gpios = <&gpio3 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 40>,
+			       <&edma0 1 41>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -583,7 +597,7 @@
 		};
 
 		gpio0: gpio@2300000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
 			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -593,7 +607,7 @@
 		};
 
 		gpio1: gpio@2310000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -603,7 +617,7 @@
 		};
 
 		gpio2: gpio@2320000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -613,7 +627,7 @@
 		};
 
 		gpio3: gpio@2330000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
 			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -629,6 +643,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 32>,
+			       <&edma0 1 33>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -639,6 +656,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 30>,
+			       <&edma0 1 31>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -649,6 +669,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 28>,
+			       <&edma0 1 29>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -659,6 +682,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 26>,
+			       <&edma0 1 27>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -669,6 +695,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 24>,
+			       <&edma0 1 25>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -679,11 +708,14 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 22>,
+			       <&edma0 1 23>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		wdog0: watchdog@2ad0000 {
-			compatible = "fsl,imx21-wdt";
+			compatible = "fsl,ls1046a-wdt", "fsl,imx21-wdt";
 			reg = <0x0 0x2ad0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -709,44 +741,55 @@
 					    QORIQ_CLK_PLL_DIV(2)>;
 		};
 
-		usb0: usb@2f00000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0x2f00000 0x0 0x10000>;
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-		};
-
-		usb1: usb@3000000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0x3000000 0x0 0x10000>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-		};
-
-		usb2: usb@3100000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0x3100000 0x0 0x10000>;
-			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-		};
-
-		sata: sata@3200000 {
-			compatible = "fsl,ls1046a-ahci";
-			reg = <0x0 0x3200000 0x0 0x10000>,
-				<0x0 0x20140520 0x0 0x4>;
-			reg-names = "ahci", "sata-ecc";
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
-					    QORIQ_CLK_PLL_DIV(2)>;
+		aux_bus: bus {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			compatible = "simple-bus";
+			ranges;
+			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
+
+			usb0: usb@2f00000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x2f00000 0x0 0x10000>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				usb3-lpm-capable;
+			};
+
+			usb1: usb@3000000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3000000 0x0 0x10000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				usb3-lpm-capable;
+			};
+
+			usb2: usb@3100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3100000 0x0 0x10000>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				usb3-lpm-capable;
+			};
+
+			sata: sata@3200000 {
+				compatible = "fsl,ls1046a-ahci";
+				reg = <0x0 0x3200000 0x0 0x10000>,
+					<0x0 0x20140520 0x0 0x4>;
+				reg-names = "ahci", "sata-ecc";
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+						    QORIQ_CLK_PLL_DIV(2)>;
+			};
 		};
 
 		msi1: msi-controller@1580000 {
@@ -784,13 +827,12 @@
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
-			interrupt-names = "aer", "pme";
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			dma-coherent;
 			num-viewport = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -802,16 +844,20 @@
 					<0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
 			status = "disabled";
 		};
 
 		pcie_ep1: pcie_ep@3400000 {
-			compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
+			compatible = "fsl,ls1046a-pcie-ep";
 			reg = <0x00 0x03400000 0x0 0x00100000>,
 			      <0x40 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme";
 			num-ib-windows = <6>;
 			num-ob-windows = <8>;
+			big-endian;
 			status = "disabled";
 		};
 
@@ -820,13 +866,12 @@
 			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
 			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
-				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
-			interrupt-names = "aer", "pme";
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			dma-coherent;
 			num-viewport = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -838,16 +883,20 @@
 					<0000 0 0 2 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
 			status = "disabled";
 		};
 
 		pcie_ep2: pcie_ep@3500000 {
-			compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
+			compatible = "fsl,ls1046a-pcie-ep";
 			reg = <0x00 0x03500000 0x0 0x00100000>,
 			      <0x48 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme";
 			num-ib-windows = <6>;
 			num-ob-windows = <8>;
+			big-endian;
 			status = "disabled";
 		};
 
@@ -856,13 +905,12 @@
 			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
 			      <0x50 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
-				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
-			interrupt-names = "aer", "pme";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			dma-coherent;
 			num-viewport = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -874,16 +922,20 @@
 					<0000 0 0 2 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
 			status = "disabled";
 		};
 
 		pcie_ep3: pcie_ep@3600000 {
-			compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep";
+			compatible = "fsl,ls1046a-pcie-ep";
 			reg = <0x00 0x03600000 0x0 0x00100000>,
 			      <0x50 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme";
 			num-ib-windows = <6>;
 			num-ob-windows = <8>;
+			big-endian;
 			status = "disabled";
 		};
 
@@ -899,6 +951,7 @@
 				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "qdma-error", "qdma-queue0",
 				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			#dma-cells = <1>;
 			dma-channels = <8>;
 			block-number = <1>;
 			block-offset = <0x10000>;
@@ -908,13 +961,13 @@
 			big-endian;
 		};
 
-		rcpm: power-controller@1ee2140 {
+		rcpm: wakeup-controller@1ee2140 {
 			compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1ee2140 0x0 0x4>;
 			#fsl,rcpm-wakeup-cells = <1>;
 		};
 
-		ftm_alarm0: timer@29d0000 {
+		ftm_alarm0: rtc@29d0000 {
 			compatible = "fsl,ls1046a-ftm-alarm";
 			reg = <0x0 0x29d0000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x20000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 41d8b15f25a5..d238a8440a81 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -53,7 +53,7 @@
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
@@ -113,7 +113,7 @@
 		  3 0 0x5 0x20000000 0x00010000>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0x0 0x0 0x8000000>;
 		bank-width = <2>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 1bfbce69cc8b..2df16bfb901c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -136,7 +136,7 @@
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
@@ -170,6 +170,13 @@
 				/* IRQ_RTC_B -> IRQ0_B(CPLD) -> IRQ00(CPU), active low */
 				interrupts-extended = <&extirq 0 IRQ_TYPE_LEVEL_LOW>;
 			};
+
+			rtc@53 {
+				compatible = "nxp,pcf2131";
+				reg = <0x53>;
+				/* IRQ_RTC_B -> IRQ0_B(CPLD) -> IRQ00(CPU), active low */
+				interrupts-extended = <&extirq 0 IRQ_TYPE_LEVEL_LOW>;
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index ef6c8967533e..3a11068f2212 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -87,6 +87,22 @@
 		los-gpios = <&sfpgpio 7 GPIO_ACTIVE_HIGH>;
 		maximum-power-milliwatt = <2000>;
 	};
+
+	usb1v2_supply: regulator-usbhub-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "usbhub_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	system3v3_supply: regulator-system-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "system_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 /* XG1 - Upper SFP */
@@ -220,7 +236,7 @@
 		#gpio-cells = <2>;
 		gpio-controller;
 
-		admin_led_lower {
+		admin-led-lower-hog {
 			gpio-hog;
 			gpios = <13 GPIO_ACTIVE_HIGH>;
 			output-low;
@@ -231,6 +247,12 @@
 		compatible = "atmel,at97sc3204t";
 		reg = <0x29>;
 	};
+
+	usbhub: usb-hub@2d {
+		compatible = "microchip,usb5744";
+		reg = <0x2d>;
+	};
+
 };
 
 &i2c2 {
@@ -245,7 +267,7 @@
 &i2c3 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9540";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -323,9 +345,9 @@
 				reg = <0x580000 0x40000>;
 			};
 
-			partition@5C0000 {
+			partition@5c0000 {
 				label = "dpc";
-				reg = <0x5C0000 0x40000>;
+				reg = <0x5c0000 0x40000>;
 			};
 
 			partition@600000 {
@@ -378,10 +400,32 @@
 	};
 };
 
+/* LS1088A USB Port 0 - direct to bottom USB-A port */
 &usb0 {
 	status = "okay";
 };
 
+/* LS1088A USB Port 1 - to Microchip USB5744 USB Hub */
 &usb1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		i2c-bus = <&usbhub>;
+		vdd-supply = <&system3v3_supply>;
+		vdd2-supply = <&usb1v2_supply>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		i2c-bus = <&usbhub>;
+		vdd-supply = <&system3v3_supply>;
+		vdd2-supply = <&usb1v2_supply>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts
new file mode 100644
index 000000000000..181eeab55aa0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "fsl-ls1088a-tqmls1088a.dtsi"
+#include "tqmls10xxa-mbls10xxa.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH LS1088A TQMLS1088A SoM on MBLS10xxA board";
+	compatible = "tq,ls1088a-tqmls1088a-mbls10xxa", "tq,ls1088a-tqmls1088a",
+		     "fsl,ls1088a";
+
+	aliases {
+		dpmac1 = &dpmac1;
+		dpmac2 = &dpmac2;
+		dpmac3 = &dpmac3;
+		dpmac4 = &dpmac4;
+		dpmac5 = &dpmac5;
+		dpmac6 = &dpmac6;
+		dpmac7 = &dpmac7;
+		dpmac8 = &dpmac8;
+		dpmac9 = &dpmac9;
+		dpmac10 = &dpmac10;
+		qsgmii-s1-p1 = &qsgmii1_phy1;
+		qsgmii-s1-p2 = &qsgmii1_phy2;
+		qsgmii-s1-p3 = &qsgmii1_phy3;
+		qsgmii-s1-p4 = &qsgmii1_phy4;
+		qsgmii-s2-p1 = &qsgmii2_phy1;
+		qsgmii-s2-p2 = &qsgmii2_phy2;
+		qsgmii-s2-p3 = &qsgmii2_phy3;
+		qsgmii-s2-p4 = &qsgmii2_phy4;
+		rgmii-s1 = &rgmii_phy1;
+		rgmii-s2 = &rgmii_phy2;
+		serial0 = &duart0;
+		serial1 = &duart1;
+	};
+
+	chosen {
+		stdout-path = &duart1;
+	};
+};
+
+&esdhc {
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+};
+
+&sfp1 {
+	status = "okay";
+};
+
+&sfp2 {
+	status = "okay";
+};
+
+&sfp1_i2c {
+	status = "okay";
+};
+
+&sfp2_i2c {
+	status = "okay";
+};
+
+#include "tqmls1088a-mbls10xxa-mc.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi
new file mode 100644
index 000000000000..b8a213df238a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for LS1088A based SoM of TQ
+ */
+
+#include "fsl-ls1088a.dtsi"
+#include "tqmls10xxa.dtsi"
+
+&qspi {
+	num-cs = <2>;
+	status = "okay";
+
+	qflash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <62500000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_vcc1v8>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+
+	qflash1: flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <62500000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_vcc1v8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 421d879013d7..9d5726378aa0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -118,20 +118,21 @@
 		      <0x0 0x0c0c0000 0 0x2000>, /* GICC */
 		      <0x0 0x0c0d0000 0 0x1000>, /* GICH */
 		      <0x0 0x0c0e0000 0 0x20000>; /* GICV */
-		interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
-		its: gic-its@6020000 {
+		its: msi-controller@6020000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
+			#msi-cells = <1>;
 			reg = <0x0 0x6020000 0 0x20000>;
 		};
 	};
 
 	thermal-zones {
-		core-cluster {
+		cluster-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
@@ -166,7 +167,7 @@
 			};
 		};
 
-		soc {
+		soc-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -183,10 +184,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
-			     <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
-			     <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
-			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
 	};
 
 	pmu {
@@ -280,50 +281,50 @@
 		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
-			interrupts = <0 23 0x4>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000023
-				0x00000001 0x0000002a
-				0x00000002 0x00000030
-				0x00000003 0x00000037
-				0x00000004 0x0000003d
-				0x00000005 0x00000044
-				0x00000006 0x0000004a
-				0x00000007 0x00000051
-				0x00000008 0x00000057
-				0x00000009 0x0000005e
-				0x0000000a 0x00000064
-				0x0000000b 0x0000006b
+				<0x00000000 0x00000023>,
+				<0x00000001 0x0000002a>,
+				<0x00000002 0x00000030>,
+				<0x00000003 0x00000037>,
+				<0x00000004 0x0000003d>,
+				<0x00000005 0x00000044>,
+				<0x00000006 0x0000004a>,
+				<0x00000007 0x00000051>,
+				<0x00000008 0x00000057>,
+				<0x00000009 0x0000005e>,
+				<0x0000000a 0x00000064>,
+				<0x0000000b 0x0000006b>,
 				/* Calibration data group 2 */
-				0x00010000 0x00000022
-				0x00010001 0x0000002a
-				0x00010002 0x00000032
-				0x00010003 0x0000003a
-				0x00010004 0x00000042
-				0x00010005 0x0000004a
-				0x00010006 0x00000052
-				0x00010007 0x0000005a
-				0x00010008 0x00000062
-				0x00010009 0x0000006a
+				<0x00010000 0x00000022>,
+				<0x00010001 0x0000002a>,
+				<0x00010002 0x00000032>,
+				<0x00010003 0x0000003a>,
+				<0x00010004 0x00000042>,
+				<0x00010005 0x0000004a>,
+				<0x00010006 0x00000052>,
+				<0x00010007 0x0000005a>,
+				<0x00010008 0x00000062>,
+				<0x00010009 0x0000006a>,
 				/* Calibration data group 3 */
-				0x00020000 0x00000021
-				0x00020001 0x0000002b
-				0x00020002 0x00000035
-				0x00020003 0x00000040
-				0x00020004 0x0000004a
-				0x00020005 0x00000054
-				0x00020006 0x0000005e
+				<0x00020000 0x00000021>,
+				<0x00020001 0x0000002b>,
+				<0x00020002 0x00000035>,
+				<0x00020003 0x00000040>,
+				<0x00020004 0x0000004a>,
+				<0x00020005 0x00000054>,
+				<0x00020006 0x0000005e>,
 				/* Calibration data group 4 */
-				0x00030000 0x00000010
-				0x00030001 0x0000001c
-				0x00030002 0x00000027
-				0x00030003 0x00000032
-				0x00030004 0x0000003e
-				0x00030005 0x00000049
-				0x00030006 0x00000054
-				0x00030007 0x00000060>;
+				<0x00030000 0x00000010>,
+				<0x00030001 0x0000001c>,
+				<0x00030002 0x00000027>,
+				<0x00030003 0x00000032>,
+				<0x00030004 0x0000003e>,
+				<0x00030005 0x00000049>,
+				<0x00030006 0x00000054>,
+				<0x00030007 0x00000060>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
@@ -347,7 +348,7 @@
 			reg = <0x0 0x21c0500 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
@@ -356,14 +357,14 @@
 			reg = <0x0 0x21c0600 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
 		gpio0: gpio@2300000 {
 			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
-			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -374,7 +375,7 @@
 		gpio1: gpio@2310000 {
 			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
-			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -385,7 +386,7 @@
 		gpio2: gpio@2320000 {
 			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
-			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -396,7 +397,7 @@
 		gpio3: gpio@2330000 {
 			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
-			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -407,7 +408,7 @@
 		ifc: memory-controller@2240000 {
 			compatible = "fsl,ifc";
 			reg = <0x0 0x2240000 0x0 0x20000>;
-			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			#address-cells = <2>;
 			#size-cells = <1>;
@@ -419,7 +420,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2000000 0x0 0x10000>;
-			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(8)>;
 			status = "disabled";
@@ -430,7 +431,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2010000 0x0 0x10000>;
-			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(8)>;
 			status = "disabled";
@@ -441,7 +442,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2020000 0x0 0x10000>;
-			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(8)>;
 			status = "disabled";
@@ -452,7 +453,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2030000 0x0 0x10000>;
-			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(8)>;
 			status = "disabled";
@@ -474,10 +475,10 @@
 			status = "disabled";
 		};
 
-		esdhc: esdhc@2140000 {
+		esdhc: mmc@2140000 {
 			compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
-			interrupts = <0 28 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>;
 			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
 			voltage-ranges = <1800 1800 3300 3300>;
@@ -490,7 +491,7 @@
 		usb0: usb@3100000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
-			interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
@@ -501,7 +502,7 @@
 		usb1: usb@3110000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3110000 0x0 0x10000>;
-			interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
@@ -514,7 +515,7 @@
 			reg = <0x0 0x3200000 0x0 0x10000>,
 				<0x7 0x100520 0x0 0x4>;
 			reg-names = "ahci", "sata-ecc";
-			interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			dma-coherent;
@@ -565,7 +566,7 @@
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
 			interrupt-names = "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -575,7 +576,7 @@
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
@@ -587,10 +588,12 @@
 		};
 
 		pcie_ep1: pcie-ep@3400000 {
-			compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
+			compatible = "fsl,ls1088a-pcie-ep";
 			reg = <0x00 0x03400000 0x0 0x00100000>,
 			      <0x20 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "pme";
 			num-ib-windows = <24>;
 			num-ob-windows = <256>;
 			max-functions = /bits/ 8 <2>;
@@ -602,7 +605,7 @@
 			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
 			      <0x28 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
 			interrupt-names = "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -612,7 +615,7 @@
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 114 IRQ_TYPE_LEVEL_HIGH>,
@@ -624,10 +627,12 @@
 		};
 
 		pcie_ep2: pcie-ep@3500000 {
-			compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
+			compatible = "fsl,ls1088a-pcie-ep";
 			reg = <0x00 0x03500000 0x0 0x00100000>,
 			      <0x28 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "pme";
 			num-ib-windows = <6>;
 			num-ob-windows = <6>;
 			status = "disabled";
@@ -638,7 +643,7 @@
 			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
 			      <0x30 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
 			interrupt-names = "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -648,7 +653,7 @@
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 119 IRQ_TYPE_LEVEL_HIGH>,
@@ -660,10 +665,12 @@
 		};
 
 		pcie_ep3: pcie-ep@3600000 {
-			compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
+			compatible = "fsl,ls1088a-pcie-ep";
 			reg = <0x00 0x03600000 0x0 0x00100000>,
 			      <0x30 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "pme";
 			num-ib-windows = <6>;
 			num-ob-windows = <6>;
 			status = "disabled";
@@ -674,6 +681,7 @@
 			reg = <0 0x5000000 0 0x800000>;
 			#iommu-cells = <1>;
 			stream-match-mask = <0x7C00>;
+			dma-coherent;
 			#global-interrupts = <12>;
 				     // global secure fault
 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -779,6 +787,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};
 
@@ -788,6 +799,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};
 
@@ -867,7 +881,7 @@
 			};
 		};
 
-		cluster1_core0_watchdog: wdt@c000000 {
+		cluster1_core0_watchdog: watchdog@c000000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc000000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -877,7 +891,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster1_core1_watchdog: wdt@c010000 {
+		cluster1_core1_watchdog: watchdog@c010000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc010000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -887,7 +901,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster1_core2_watchdog: wdt@c020000 {
+		cluster1_core2_watchdog: watchdog@c020000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc020000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -897,7 +911,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster1_core3_watchdog: wdt@c030000 {
+		cluster1_core3_watchdog: watchdog@c030000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc030000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -907,7 +921,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core0_watchdog: wdt@c100000 {
+		cluster2_core0_watchdog: watchdog@c100000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc100000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -917,7 +931,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core1_watchdog: wdt@c110000 {
+		cluster2_core1_watchdog: watchdog@c110000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc110000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -927,7 +941,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core2_watchdog: wdt@c120000 {
+		cluster2_core2_watchdog: watchdog@c120000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc120000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -937,7 +951,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core3_watchdog: wdt@c130000 {
+		cluster2_core3_watchdog: watchdog@c130000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc130000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -951,7 +965,7 @@
 			compatible = "fsl,qoriq-mc";
 			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
 			      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			iommu-map = <0 &smmu 0 0>;	/* This is fixed-up by u-boot */
 			dma-coherent;
 			#address-cells = <3>;
@@ -1020,14 +1034,14 @@
 			};
 		};
 
-		rcpm: power-controller@1e34040 {
+		rcpm: wakeup-controller@1e34040 {
 			compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1e34040 0x0 0x18>;
 			#fsl,rcpm-wakeup-cells = <6>;
 			little-endian;
 		};
 
-		ftm_alarm0: timer@2800000 {
+		ftm_alarm0: rtc@2800000 {
 			compatible = "fsl,ls1088a-ftm-alarm";
 			reg = <0x0 0x2800000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
index 44894356059c..8b6915136997 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -14,6 +14,7 @@
 
 #include "fsl-ls2080a.dtsi"
 #include "fsl-ls208xa-rdb.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	model = "Freescale Layerscape 2080a RDB Board";
@@ -23,3 +24,71 @@
 		stdout-path = "serial1:115200n8";
 	};
 };
+
+&dpmac5 {
+	phy-handle = <&mdio2_phy1>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac6 {
+	phy-handle = <&mdio2_phy2>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac7 {
+	phy-handle = <&mdio2_phy3>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac8 {
+	phy-handle = <&mdio2_phy4>;
+	phy-connection-type = "10gbase-r";
+};
+
+&emdio1 {
+	status = "disabled";
+
+	/* CS4340 PHYs */
+	mdio1_phy1: emdio1-phy@10 {
+		reg = <0x10>;
+	};
+
+	mdio1_phy2: emdio1-phy@11 {
+		reg = <0x11>;
+	};
+
+	mdio1_phy3: emdio1-phy@12 {
+		reg = <0x12>;
+	};
+
+	mdio1_phy4: emdio1-phy@13 {
+		reg = <0x13>;
+	};
+};
+
+&emdio2 {
+	/* AQR405 PHYs */
+	mdio2_phy1: emdio2-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x0>;
+	};
+
+	mdio2_phy2: emdio2-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x1>;
+	};
+
+	mdio2_phy3: emdio2-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x2>;
+	};
+
+	mdio2_phy4: emdio2-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 6f6667b70028..e9bc1f4fa13c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -12,6 +12,13 @@
 #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
 #include "fsl-ls208xa.dtsi"
 
+/ {
+	pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
 &cpu {
 	cpu0: cpu@0 {
 		device_type = "cpu";
@@ -95,18 +102,26 @@
 
 	cluster0_l2: l2-cache0 {
 		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
 	};
 
 	cluster1_l2: l2-cache1 {
 		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
 	};
 
 	cluster2_l2: l2-cache2 {
 		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
 	};
 
 	cluster3_l2: l2-cache3 {
 		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
 	};
 
 	CPU_PW20: cpu-pw20 {
@@ -150,3 +165,7 @@
 	ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000   /* downstream I/O */
 		  0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 };
+
+&timer {
+	fsl,erratum-a008585;
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
new file mode 100644
index 000000000000..4461e16fd53a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NXP LS2081A RDB Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Priyanka Jain <priyanka.jain@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2088a.dtsi"
+
+/ {
+	model = "NXP Layerscape 2081A RDB Board";
+	compatible = "fsl,ls2081a-rdb", "fsl,ls2081a";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&dspi {
+	status = "okay";
+
+	n25q512a: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <3000000>;
+		reg = <0>;
+	};
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9547: mux@75 {
+		compatible = "nxp,pca9547";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			adt7481@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&ifc {
+	status = "disabled";
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		spi-max-frequency = <20000000>;
+		reg = <1>;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
index c3dc38188c17..60c422560e33 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -12,6 +12,13 @@
 #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
 #include "fsl-ls208xa.dtsi"
 
+/ {
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
 &cpu {
 	cpu0: cpu@0 {
 		device_type = "cpu";
@@ -95,18 +102,26 @@
 
 	cluster0_l2: l2-cache0 {
 		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
 	};
 
 	cluster1_l2: l2-cache1 {
 		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
 	};
 
 	cluster2_l2: l2-cache2 {
 		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
 	};
 
 	cluster3_l2: l2-cache3 {
 		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
 	};
 
 	CPU_PW20: cpu-pw20 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index 6fab73d484b6..556d8c5f3180 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -9,6 +9,27 @@
  *
  */
 
+/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
+&dpmac9 {
+	phy-handle = <&mdio0_phy12>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac10 {
+	phy-handle = <&mdio0_phy13>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac11 {
+	phy-handle = <&mdio0_phy14>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac12 {
+	phy-handle = <&mdio0_phy15>;
+	phy-connection-type = "sgmii";
+};
+
 &esdhc {
 	mmc-hs200-1_8v;
 	status = "okay";
@@ -22,7 +43,7 @@
 		  0x2 0x0 0x5 0x30000000 0x00010000
 		  0x3 0x0 0x5 0x20000000 0x00010000>;
 
-	nor@0,0 {
+	flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
@@ -36,15 +57,53 @@
 	     reg = <0x2 0x0 0x10000>;
 	};
 
-	cpld@3,0 {
-	     reg = <0x3 0x0 0x10000>;
-	     compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
+	boardctrl: board-control@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ls208xaqds-fpga", "fsl,fpga-qixis", "simple-mfd";
+		reg = <3 0 0x1000>;
+		ranges = <0 3 0 0x1000>;
+
+		mdio-mux@54 {
+			compatible = "mdio-mux-mmioreg", "mdio-mux";
+			mdio-parent-bus = <&emdio1>;
+			reg = <0x54 1>;		/* BRDCFG4 */
+			mux-mask = <0xe0>;	/* EMI1_MDIO */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* Child MDIO buses, one for each riser card:
+			 * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
+			 * VSC8234 PHYs on the riser cards.
+			 */
+			mdio_mux3: mdio@60 {
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio0_phy12: mdio-phy0@1c {
+					reg = <0x1c>;
+				};
+
+				mdio0_phy13: mdio-phy1@1d {
+					reg = <0x1d>;
+				};
+
+				mdio0_phy14: mdio-phy2@1e {
+					reg = <0x1e>;
+				};
+
+				mdio0_phy15: mdio-phy3@1f {
+					reg = <0x1f>;
+				};
+			};
+		};
 	};
 };
 
 &i2c0 {
 	status = "okay";
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index f8135c5c252d..69cd05a30b85 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -21,7 +21,7 @@
 		  0x2 0x0 0x5 0x30000000 0x00010000
 		  0x3 0x0 0x5 0x20000000 0x00010000>;
 
-	nor@0,0 {
+	flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
@@ -44,11 +44,13 @@
 
 &i2c0 {
 	status = "okay";
-	pca9547@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9547";
 		reg = <0x75>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		idle-state = <0>;
+
 		i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index d76f1c42f3fa..9421fdd7e30e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -58,29 +58,29 @@
 		#size-cells = <2>;
 		ranges;
 		interrupt-controller;
-		interrupts = <1 9 0x4>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
-		its: gic-its@6020000 {
+		its: msi-controller@6020000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
+			#msi-cells = <1>;
 			reg = <0x0 0x6020000 0 0x20000>;
 		};
 	};
 
 	rstcr: syscon@1e60000 {
-		compatible = "fsl,ls2080a-rstcr", "syscon";
+		compatible = "fsl,ls1028a-reset", "syscon", "simple-mfd";
 		reg = <0x0 0x1e60000 0x0 0x4>;
-	};
 
-	reboot {
-		compatible = "syscon-reboot";
-		regmap = <&rstcr>;
-		offset = <0x0>;
-		mask = <0x2>;
+		reboot {
+			compatible = "syscon-reboot";
+			offset = <0x0>;
+			mask = <0x2>;
+		};
 	};
 
 	thermal-zones {
-		ddr-controller1 {
+		ddr-ctrl1-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -94,7 +94,7 @@
 			};
 		};
 
-		ddr-controller2 {
+		ddr-ctrl2-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 2>;
@@ -108,7 +108,7 @@
 			};
 		};
 
-		ddr-controller3 {
+		ddr-ctrl3-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
@@ -122,7 +122,7 @@
 			};
 		};
 
-		core-cluster1 {
+		cluster1-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 4>;
@@ -151,7 +151,7 @@
 			};
 		};
 
-		core-cluster2 {
+		cluster2-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 5>;
@@ -180,7 +180,7 @@
 			};
 		};
 
-		core-cluster3 {
+		cluster3-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 6>;
@@ -209,7 +209,7 @@
 			};
 		};
 
-		core-cluster4 {
+		cluster4-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 7>;
@@ -239,18 +239,12 @@
 		};
 	};
 
-	timer {
+	timer: timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
-			     <1 14 4>, /* Physical Non-Secure PPI, active-low */
-			     <1 11 4>, /* Virtual PPI, active-low */
-			     <1 10 4>; /* Hypervisor PPI, active-low */
-		fsl,erratum-a008585;
-	};
-
-	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hypervisor PPI */
 	};
 
 	psci {
@@ -320,44 +314,45 @@
 		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
-			interrupts = <0 23 0x4>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
-			fsl,tmu-calibration = <0x00000000 0x00000026
-					       0x00000001 0x0000002d
-					       0x00000002 0x00000032
-					       0x00000003 0x00000039
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000046
-					       0x00000006 0x0000004d
-					       0x00000007 0x00000054
-					       0x00000008 0x0000005a
-					       0x00000009 0x00000061
-					       0x0000000a 0x0000006a
-					       0x0000000b 0x00000071
-
-					       0x00010000 0x00000025
-					       0x00010001 0x0000002c
-					       0x00010002 0x00000035
-					       0x00010003 0x0000003d
-					       0x00010004 0x00000045
-					       0x00010005 0x0000004e
-					       0x00010006 0x00000057
-					       0x00010007 0x00000061
-					       0x00010008 0x0000006b
-					       0x00010009 0x00000076
-
-					       0x00020000 0x00000029
-					       0x00020001 0x00000033
-					       0x00020002 0x0000003d
-					       0x00020003 0x00000049
-					       0x00020004 0x00000056
-					       0x00020005 0x00000061
-					       0x00020006 0x0000006d
-
-					       0x00030000 0x00000021
-					       0x00030001 0x0000002a
-					       0x00030002 0x0000003c
-					       0x00030003 0x0000004e>;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000026>,
+					<0x00000001 0x0000002d>,
+					<0x00000002 0x00000032>,
+					<0x00000003 0x00000039>,
+					<0x00000004 0x0000003f>,
+					<0x00000005 0x00000046>,
+					<0x00000006 0x0000004d>,
+					<0x00000007 0x00000054>,
+					<0x00000008 0x0000005a>,
+					<0x00000009 0x00000061>,
+					<0x0000000a 0x0000006a>,
+					<0x0000000b 0x00000071>,
+
+					<0x00010000 0x00000025>,
+					<0x00010001 0x0000002c>,
+					<0x00010002 0x00000035>,
+					<0x00010003 0x0000003d>,
+					<0x00010004 0x00000045>,
+					<0x00010005 0x0000004e>,
+					<0x00010006 0x00000057>,
+					<0x00010007 0x00000061>,
+					<0x00010008 0x0000006b>,
+					<0x00010009 0x00000076>,
+
+					<0x00020000 0x00000029>,
+					<0x00020001 0x00000033>,
+					<0x00020002 0x0000003d>,
+					<0x00020003 0x00000049>,
+					<0x00020004 0x00000056>,
+					<0x00020005 0x00000061>,
+					<0x00020006 0x0000006d>,
+
+					<0x00030000 0x00000021>,
+					<0x00030001 0x0000002a>,
+					<0x00030002 0x0000003c>,
+					<0x00030003 0x0000004e>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
@@ -367,7 +362,7 @@
 			reg = <0x0 0x21c0500 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 32 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial1: serial@21c0600 {
@@ -375,7 +370,7 @@
 			reg = <0x0 0x21c0600 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 32 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial2: serial@21d0500 {
@@ -383,7 +378,7 @@
 			reg = <0x0 0x21d0500 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 33 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial3: serial@21d0600 {
@@ -391,10 +386,10 @@
 			reg = <0x0 0x21d0600 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 33 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		cluster1_core0_watchdog: wdt@c000000 {
+		cluster1_core0_watchdog: watchdog@c000000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc000000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -404,7 +399,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster1_core1_watchdog: wdt@c010000 {
+		cluster1_core1_watchdog: watchdog@c010000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc010000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -414,7 +409,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core0_watchdog: wdt@c100000 {
+		cluster2_core0_watchdog: watchdog@c100000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc100000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -424,7 +419,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core1_watchdog: wdt@c110000 {
+		cluster2_core1_watchdog: watchdog@c110000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc110000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -434,7 +429,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster3_core0_watchdog: wdt@c200000 {
+		cluster3_core0_watchdog: watchdog@c200000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc200000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -444,7 +439,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster3_core1_watchdog: wdt@c210000 {
+		cluster3_core1_watchdog: watchdog@c210000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc210000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -454,7 +449,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster4_core0_watchdog: wdt@c300000 {
+		cluster4_core0_watchdog: watchdog@c300000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc300000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -464,7 +459,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster4_core1_watchdog: wdt@c310000 {
+		cluster4_core1_watchdog: watchdog@c310000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc310000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -533,6 +528,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
@@ -542,6 +540,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
@@ -757,7 +758,7 @@
 			compatible = "fsl,qoriq-mc";
 			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
 			      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			iommu-map = <0 &smmu 0 0>;	/* This is fixed-up by u-boot */
 			dma-coherent;
 			#address-cells = <3>;
@@ -882,48 +883,48 @@
 			#iommu-cells = <1>;
 			stream-match-mask = <0x7C00>;
 			dma-coherent;
-			interrupts = <0 13 4>, /* global secure fault */
-				     <0 14 4>, /* combined secure interrupt */
-				     <0 15 4>, /* global non-secure fault */
-				     <0 16 4>, /* combined non-secure interrupt */
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* global secure fault */
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* combined secure interrupt */
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, /* global non-secure fault */
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, /* combined non-secure interrupt */
 				/* performance counter interrupts 0-7 */
-				     <0 211 4>, <0 212 4>,
-				     <0 213 4>, <0 214 4>,
-				     <0 215 4>, <0 216 4>,
-				     <0 217 4>, <0 218 4>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
 				/* per context interrupt, 64 interrupts */
-				     <0 146 4>, <0 147 4>,
-				     <0 148 4>, <0 149 4>,
-				     <0 150 4>, <0 151 4>,
-				     <0 152 4>, <0 153 4>,
-				     <0 154 4>, <0 155 4>,
-				     <0 156 4>, <0 157 4>,
-				     <0 158 4>, <0 159 4>,
-				     <0 160 4>, <0 161 4>,
-				     <0 162 4>, <0 163 4>,
-				     <0 164 4>, <0 165 4>,
-				     <0 166 4>, <0 167 4>,
-				     <0 168 4>, <0 169 4>,
-				     <0 170 4>, <0 171 4>,
-				     <0 172 4>, <0 173 4>,
-				     <0 174 4>, <0 175 4>,
-				     <0 176 4>, <0 177 4>,
-				     <0 178 4>, <0 179 4>,
-				     <0 180 4>, <0 181 4>,
-				     <0 182 4>, <0 183 4>,
-				     <0 184 4>, <0 185 4>,
-				     <0 186 4>, <0 187 4>,
-				     <0 188 4>, <0 189 4>,
-				     <0 190 4>, <0 191 4>,
-				     <0 192 4>, <0 193 4>,
-				     <0 194 4>, <0 195 4>,
-				     <0 196 4>, <0 197 4>,
-				     <0 198 4>, <0 199 4>,
-				     <0 200 4>, <0 201 4>,
-				     <0 202 4>, <0 203 4>,
-				     <0 204 4>, <0 205 4>,
-				     <0 206 4>, <0 207 4>,
-				     <0 208 4>, <0 209 4>;
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		dspi: spi@2100000 {
@@ -932,18 +933,18 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2100000 0x0 0x10000>;
-			interrupts = <0 26 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			clock-names = "dspi";
 			spi-num-chipselects = <5>;
 		};
 
-		esdhc: esdhc@2140000 {
+		esdhc: mmc@2140000 {
 			status = "disabled";
 			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
-			interrupts = <0 28 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			voltage-ranges = <1800 1800 3300 3300>;
@@ -955,7 +956,7 @@
 		gpio0: gpio@2300000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
-			interrupts = <0 36 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
@@ -966,7 +967,7 @@
 		gpio1: gpio@2310000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
-			interrupts = <0 36 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
@@ -977,7 +978,7 @@
 		gpio2: gpio@2320000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
-			interrupts = <0 37 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
@@ -988,7 +989,7 @@
 		gpio3: gpio@2330000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
-			interrupts = <0 37 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
@@ -1002,8 +1003,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2000000 0x0 0x10000>;
-			interrupts = <0 34 0x4>; /* Level high type */
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 		};
@@ -1014,8 +1015,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2010000 0x0 0x10000>;
-			interrupts = <0 34 0x4>; /* Level high type */
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 		};
@@ -1026,8 +1027,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2020000 0x0 0x10000>;
-			interrupts = <0 35 0x4>; /* Level high type */
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 		};
@@ -1038,8 +1039,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2030000 0x0 0x10000>;
-			interrupts = <0 35 0x4>; /* Level high type */
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 		};
@@ -1047,7 +1048,7 @@
 		ifc: memory-controller@2240000 {
 			compatible = "fsl,ifc";
 			reg = <0x0 0x2240000 0x0 0x20000>;
-			interrupts = <0 21 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			#address-cells = <2>;
 			#size-cells = <1>;
@@ -1074,9 +1075,9 @@
 		};
 
 		pcie1: pcie@3400000 {
-			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+			compatible = "fsl,ls2080a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 108 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -1084,7 +1085,7 @@
 			dma-coherent;
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
@@ -1096,9 +1097,9 @@
 		};
 
 		pcie2: pcie@3500000 {
-			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+			compatible = "fsl,ls2080a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 113 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -1106,7 +1107,7 @@
 			dma-coherent;
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
@@ -1118,9 +1119,9 @@
 		};
 
 		pcie3: pcie@3600000 {
-			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+			compatible = "fsl,ls2080a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 118 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -1128,7 +1129,7 @@
 			dma-coherent;
 			num-viewport = <256>;
 			bus-range = <0x0 0xff>;
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
@@ -1140,9 +1141,9 @@
 		};
 
 		pcie4: pcie@3700000 {
-			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+			compatible = "fsl,ls2080a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 123 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -1150,7 +1151,7 @@
 			dma-coherent;
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
@@ -1165,7 +1166,7 @@
 			status = "disabled";
 			compatible = "fsl,ls2080a-ahci";
 			reg = <0x0 0x3200000 0x0 0x10000>;
-			interrupts = <0 133 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			dma-coherent;
@@ -1175,48 +1176,56 @@
 			status = "disabled";
 			compatible = "fsl,ls2080a-ahci";
 			reg = <0x0 0x3210000 0x0 0x10000>;
-			interrupts = <0 136 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			dma-coherent;
 		};
 
-		usb0: usb@3100000 {
-			status = "disabled";
-			compatible = "snps,dwc3";
-			reg = <0x0 0x3100000 0x0 0x10000>;
-			interrupts = <0 80 0x4>; /* Level high type */
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-		};
+		bus: bus {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			compatible = "simple-bus";
+			ranges;
+			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
+
+			usb0: usb@3100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3100000 0x0 0x10000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
 
-		usb1: usb@3110000 {
-			status = "disabled";
-			compatible = "snps,dwc3";
-			reg = <0x0 0x3110000 0x0 0x10000>;
-			interrupts = <0 81 0x4>; /* Level high type */
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			usb1: usb@3110000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3110000 0x0 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
 		};
 
 		ccn@4000000 {
 			compatible = "arm,ccn-504";
 			reg = <0x0 0x04000000 0x0 0x01000000>;
-			interrupts = <0 12 4>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		rcpm: power-controller@1e34040 {
+		rcpm: wakeup-controller@1e34040 {
 			compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1e34040 0x0 0x18>;
 			#fsl,rcpm-wakeup-cells = <6>;
 			little-endian;
 		};
 
-		ftm_alarm0: timer@2800000 {
+		ftm_alarm0: rtc@2800000 {
 			compatible = "fsl,ls208xa-ftm-alarm";
 			reg = <0x0 0x2800000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
@@ -1227,14 +1236,14 @@
 	ddr1: memory-controller@1080000 {
 		compatible = "fsl,qoriq-memory-controller";
 		reg = <0x0 0x1080000 0x0 0x1000>;
-		interrupts = <0 17 0x4>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		little-endian;
 	};
 
 	ddr2: memory-controller@1090000 {
 		compatible = "fsl,qoriq-memory-controller";
 		reg = <0x0 0x1090000 0x0 0x1000>;
-		interrupts = <0 18 0x4>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 		little-endian;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
index afb455210bd0..eec2cd6c6d32 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -41,6 +41,7 @@
 	rgmii_phy1: ethernet-phy@1 {
 		reg = <1>;
 		qca,smarteee-tw-us-1g = <24>;
+		interrupts-extended = <&gpio2 4 IRQ_TYPE_EDGE_FALLING>;
 	};
 };
 
@@ -54,7 +55,7 @@
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -94,9 +95,6 @@
 			fan-temperature-ctrlr@18 {
 				compatible = "ti,amc6821";
 				reg = <0x18>;
-				cooling-min-state = <0>;
-				cooling-max-state = <9>;
-				#cooling-cells = <2>;
 			};
 		};
 
@@ -159,6 +157,7 @@
 	rtc@51 {
 		compatible = "nxp,pcf2129";
 		reg = <0x51>;
+		interrupts-extended = <&gpio2 8 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
index a7dcbecc1f41..af6258b2fe82 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
@@ -96,6 +96,14 @@
 	status = "okay";
 };
 
+&pcie3 {
+	status = "okay";
+};
+
+&pcie5 {
+	status = "okay";
+};
+
 &pcs_mdio7 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
index 4d721197d837..2d01e20b47e7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -43,12 +43,22 @@
 			reg = <0x00>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			rgmii_phy1: ethernet-phy@1 {
+				compatible = "ethernet-phy-id001c.c916";
+				reg = <0x1>;
+			};
 		};
 
 		mdio@8 { /* On-board PHY #2 RGMI2*/
 			reg = <0x8>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			rgmii_phy2: ethernet-phy@2 {
+				compatible = "ethernet-phy-id001c.c916";
+				reg = <0x2>;
+			};
 		};
 
 		mdio@18 { /* Slot #1 */
@@ -169,6 +179,16 @@
 	status = "okay";
 };
 
+&dpmac17 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii-id";
+};
+
 &dspi0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rev2.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rev2.dtsi
new file mode 100644
index 000000000000..f54005e37924
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rev2.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160 REV2
+//
+// Copyright 2025 NXP
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+&pcie1 {
+	compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
+	reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+	      0x80 0x00000000 0x0 0x00002000>; /* configuration space */
+	reg-names = "regs", "config";
+
+	ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>;
+
+	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "intr";
+
+	/delete-property/ apio-wins;
+	/delete-property/ ppio-wins;
+};
+
+&pcie2 {
+	compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
+	reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+	       0x88 0x00000000 0x0 0x00002000>; /* configuration space */
+	reg-names = "regs", "config";
+
+	ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>;
+
+	interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "intr";
+
+	/delete-property/ apio-wins;
+	/delete-property/ ppio-wins;
+};
+
+&pcie3 {
+	compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
+	reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
+	       0x90 0x00000000 0x0 0x00002000>; /* configuration space */
+	reg-names = "regs", "config";
+
+	ranges = <0x81000000 0x0 0x00000000 0x90 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>;
+
+	interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "intr";
+
+	/delete-property/ apio-wins;
+	/delete-property/ ppio-wins;
+};
+
+
+&pcie4 {
+	compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
+	reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
+	       0x98 0x00000000 0x0 0x00002000>; /* configuration space */
+	reg-names = "regs", "config";
+
+	ranges = <0x81000000 0x0 0x00000000 0x98 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>;
+
+	interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "intr";
+
+	/delete-property/ apio-wins;
+	/delete-property/ ppio-wins;
+};
+
+&pcie5 {
+	compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
+	reg = <0x00 0x03800000 0x0 0x00100000   /* controller registers */
+	       0xa0 0x00000000 0x0 0x00002000>; /* configuration space */
+	reg-names = "regs", "config";
+
+	ranges = <0x81000000 0x0 0x00000000 0xa0 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>;
+
+	interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "intr";
+
+	/delete-property/ apio-wins;
+	/delete-property/ ppio-wins;
+};
+
+&pcie6 {
+	compatible = "fsl,lx2160ar2-pcie", "fsl,ls2088a-pcie";
+	reg = <0x00 0x03900000 0x0 0x00100000   /* controller registers */
+	       0xa8 0x00000000 0x0 0x00002000>; /* configuration space */
+	reg-names = "regs", "config";
+
+	ranges = <0x81000000 0x0 0x00000000 0xa8 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>;
+
+	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "intr";
+
+	/delete-property/ apio-wins;
+	/delete-property/ ppio-wins;
+};
+
+&soc {
+	pcie_ep1: pcie-ep@3400000 {
+		compatible = "fsl,lx2160ar2-pcie-ep";
+		reg = <0x00 0x03400000 0x0 0x00100000
+		       0x80 0x00000000 0x8 0x00000000>;
+		reg-names = "regs", "addr_space";
+		num-ob-windows = <8>;
+		num-ib-windows = <8>;
+		status = "disabled";
+	};
+
+	pcie_ep2: pcie-ep@3500000 {
+		compatible = "fsl,lx2160ar2-pcie-ep";
+		reg = <0x00 0x03500000 0x0 0x00100000
+		       0x88 0x00000000 0x8 0x00000000>;
+		reg-names = "regs", "addr_space";
+		num-ob-windows = <8>;
+		num-ib-windows = <8>;
+		status = "disabled";
+	};
+
+	pcie_ep3: pcie-ep@3600000 {
+		compatible = "fsl,lx2160ar2-pcie-ep";
+		reg = <0x00 0x03600000 0x0 0x00100000
+		       0x90 0x00000000 0x8 0x00000000>;
+		reg-names = "regs", "addr_space";
+		num-ob-windows = <256>;
+		num-ib-windows = <24>;
+		status = "disabled";
+	};
+
+	pcie_ep4: pcie-ep@3700000 {
+		compatible = "fsl,lx2160ar2-pcie-ep";
+		reg = <0x00 0x03700000 0x0 0x00100000
+		       0x98 0x00000000 0x8 0x00000000>;
+		reg-names = "regs", "addr_space";
+		num-ob-windows = <8>;
+		num-ib-windows = <8>;
+		status = "disabled";
+	};
+
+
+	pcie_ep5: pcie-ep@3800000 {
+		compatible = "fsl,lx2160ar2-pcie-ep";
+		reg = <0x00 0x03800000 0x0 0x00100000
+		       0xa0 0x00000000 0x8 0x00000000>;
+		reg-names = "regs", "addr_space";
+		num-ob-windows = <256>;
+		num-ib-windows = <24>;
+		status = "disabled";
+	};
+
+	pcie_ep6: pcie-ep@3900000 {
+		compatible = "fsl,lx2160ar2-pcie-ep";
+		reg = <0x00 0x03900000 0x0 0x00100000
+		       0xa8 0x00000000 0x8 0x00000000>;
+		reg-names = "regs", "addr_space";
+		num-ob-windows = <8>;
+		num-ib-windows = <8>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts
new file mode 100644
index 000000000000..f6a4f8d54301
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+#include "fsl-lx2160a-tqmlx2160a.dtsi"
+
+/ {
+	model = "TQ Systems GmbH MBLX2160A Starterkit";
+	compatible = "tq,lx2160a-tqmlx2160a-mblx2160a", "tq,lx2160a-tqmlx2160a",
+		     "fsl,lx2160a";
+
+	aliases {
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-user1 {
+			label = "button:user1";
+			gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F1>;
+		};
+
+		button-user2 {
+			label = "button:user2";
+			gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user1 {
+			gpios = <&gpioex1 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user2 {
+			gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <1>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sfp_xfi1: sfp-xfi1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&xfi1_i2c>;
+		mod-def0-gpios = <&gpioex2 2 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioex2 3 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioex2 0 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioex2 1 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	sfp_xfi2: sfp-xfi2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&xfi2_i2c>;
+		mod-def0-gpios = <&gpioex2 6 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioex2 7 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioex2 4 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioex2 5 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&dpmac17 {
+	phy-handle = <&dp83867_2_3>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	phy-handle = <&dp83867_2_4>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+
+	dp83867_1_1: ethernet-phy@1 {
+		reg = <1>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_2: ethernet-phy@2 {
+		reg = <2>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_3: ethernet-phy@3 {
+		reg = <3>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_4: ethernet-phy@4 {
+		reg = <4>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_5: ethernet-phy@5 {
+		reg = <5>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_6: ethernet-phy@6 {
+		reg = <6>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&emdio2 {
+	status = "okay";
+
+	dp83867_2_1: ethernet-phy@1 {
+		reg = <1>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_2_2: ethernet-phy@2 {
+		reg = <2>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_2_3: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_2_4: ethernet-phy@4 {
+		reg = <4>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	no-mmc;
+	no-sdio;
+	wp-gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c0 {
+	gpioex3: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&reg_vcc3v3>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpioex0: gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				vcc-supply = <&reg_vcc3v3>;
+			};
+
+			gpioex1: gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				vcc-supply = <&reg_vcc3v3>;
+			};
+
+			gpioex2: gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				vcc-supply = <&reg_vcc3v3>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&reg_vcc3v3>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		xfi1_i2c: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		xfi2_i2c: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&pcs_mdio17 {
+	status = "okay";
+};
+
+&pcs_mdio18 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc3v3>;
+	};
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso
new file mode 100644
index 000000000000..8284a564e20d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac9 {
+	phy-handle = <&dp83867_2_1>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac10 {
+	phy-handle = <&dp83867_2_2>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&pcs_mdio9 {
+	status = "okay";
+};
+
+&pcs_mdio10 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso
new file mode 100644
index 000000000000..636b17a383ed
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac1 {
+	managed = "in-band-status";
+};
+
+&pcs_mdio1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso
new file mode 100644
index 000000000000..6d0c808cd840
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac12 {
+	phy-handle = <&dp83867_1_1>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac13 {
+	phy-handle = <&dp83867_1_5>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac14 {
+	phy-handle = <&dp83867_1_6>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac16 {
+	phy-handle = <&dp83867_1_4>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&pcs_mdio12 {
+	status = "okay";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&pcs_mdio16 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso
new file mode 100644
index 000000000000..db88a86ff69c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac12 {
+	phy-handle = <&dp83867_1_1>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac13 {
+	sfp = <&sfp_xfi1>;
+	managed = "in-band-status";
+};
+
+&dpmac14 {
+	sfp = <&sfp_xfi2>;
+	managed = "in-band-status";
+};
+
+&dpmac16 {
+	phy-handle = <&dp83867_1_4>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&pcs_mdio12 {
+	status = "okay";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&pcs_mdio16 {
+	status = "okay";
+};
+
+&sfp_xfi1 {
+	status = "okay";
+};
+
+&sfp_xfi2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso
new file mode 100644
index 000000000000..f6dfa76aa0e7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac13 {
+	sfp = <&sfp_xfi1>;
+	managed = "in-band-status";
+};
+
+&dpmac14 {
+	sfp = <&sfp_xfi2>;
+	managed = "in-band-status";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sfp_xfi1 {
+	status = "okay";
+};
+
+&sfp_xfi2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi
new file mode 100644
index 000000000000..89a4765737b4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+
+&emdio1 {
+	status = "okay";
+};
+
+&emdio2 {
+	status = "okay";
+};
+
+&esdhc1 {
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <10000000>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+
+	flash1: flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <10000000>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&i2c0 {
+	scl-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	sensor0: temperature-sensor@1f {
+		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		reg = <0x1f>;
+	};
+
+	eeprom1: eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
+	};
+
+	eeprom2: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 6680fb2a6dc9..c9541403bcd8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -300,6 +300,7 @@
 
 		cluster0_l2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -308,6 +309,7 @@
 
 		cluster1_l2: l2-cache1 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -316,6 +318,7 @@
 
 		cluster2_l2: l2-cache2 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -324,6 +327,7 @@
 
 		cluster3_l2: l2-cache3 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -332,6 +336,7 @@
 
 		cluster4_l2: l2-cache4 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -340,6 +345,7 @@
 
 		cluster5_l2: l2-cache5 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -348,6 +354,7 @@
 
 		cluster6_l2: l2-cache6 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -356,6 +363,7 @@
 
 		cluster7_l2: l2-cache7 {
 			compatible = "cache";
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -387,9 +395,10 @@
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
-		its: gic-its@6020000 {
+		its: msi-controller@6020000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
+			#msi-cells = <1>;
 			reg = <0x0 0x6020000 0 0x20000>;
 		};
 	};
@@ -441,7 +450,7 @@
 	};
 
 	thermal-zones {
-		cluster6-7 {
+		cluster6-7-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
@@ -484,7 +493,7 @@
 			};
 		};
 
-		ddr-cluster5 {
+		ddr-ctrl5-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -504,7 +513,7 @@
 			};
 		};
 
-		wriop {
+		wriop-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 2>;
@@ -524,7 +533,7 @@
 			};
 		};
 
-		dce-qbman-hsio2 {
+		dce-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
@@ -544,7 +553,7 @@
 			};
 		};
 
-		ccn-dpaa-tbu {
+		ccn-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 4>;
@@ -564,7 +573,7 @@
 			};
 		};
 
-		cluster4-hsio3 {
+		cluster4-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 5>;
@@ -584,7 +593,7 @@
 			};
 		};
 
-		cluster2-3 {
+		cluster2-3-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 6>;
@@ -605,7 +614,7 @@
 		};
 	};
 
-	soc {
+	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -618,6 +627,13 @@
 			#phy-cells = <1>;
 		};
 
+		serdes_2: phy@1eb0000 {
+			compatible = "fsl,lynx-28g";
+			reg = <0x0 0x1eb0000 0x0 0x1e30>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
 		crypto: crypto@8000000 {
 			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
 			fsl,sec-era = <10>;
@@ -717,9 +733,9 @@
 			fsl,tmu-range = <0x800000e6 0x8001017d>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000035
+				<0x00000000 0x00000035>,
 				/* Calibration data group 2 */
-				0x00000001 0x00000154>;
+				<0x00000001 0x00000154>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
@@ -730,10 +746,13 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2000000 0x0 0x10000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
-			scl-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c0_scl>;
+			pinctrl-1 = <&i2c0_scl_gpio>;
+			scl-gpios = <&gpio0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -743,9 +762,13 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2010000 0x0 0x10000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c1_scl>;
+			pinctrl-1 = <&i2c1_scl_gpio>;
+			scl-gpios = <&gpio0 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -755,9 +778,13 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2020000 0x0 0x10000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c2_scl>;
+			pinctrl-1 = <&i2c2_scl_gpio>;
+			scl-gpios = <&gpio0 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -767,9 +794,13 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2030000 0x0 0x10000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c3_scl>;
+			pinctrl-1 = <&i2c3_scl_gpio>;
+			scl-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -779,10 +810,13 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2040000 0x0 0x10000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
-			scl-gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c4_scl>;
+			pinctrl-1 = <&i2c4_scl_gpio>;
+			scl-gpios = <&gpio0 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -792,9 +826,13 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2050000 0x0 0x10000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c5_scl>;
+			pinctrl-1 = <&i2c5_scl_gpio>;
+			scl-gpios = <&gpio0 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -804,9 +842,13 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2060000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c6_scl>;
+			pinctrl-1 = <&i2c6_scl_gpio>;
+			scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -816,9 +858,13 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2070000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
+			pinctrl-names = "default", "gpio";
+			pinctrl-0 = <&i2c7_scl>;
+			pinctrl-1 = <&i2c7_scl_gpio>;
+			scl-gpios = <&gpio1 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
@@ -880,10 +926,10 @@
 			status = "disabled";
 		};
 
-		esdhc0: esdhc@2140000 {
-			compatible = "fsl,esdhc";
+		esdhc0: mmc@2140000 {
+			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
-			interrupts = <0 28 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			dma-coherent;
@@ -894,10 +940,10 @@
 			status = "disabled";
 		};
 
-		esdhc1: esdhc@2150000 {
-			compatible = "fsl,esdhc";
+		esdhc1: mmc@2150000 {
+			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2150000 0x0 0x10000>;
-			interrupts = <0 63 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			dma-coherent;
@@ -934,39 +980,55 @@
 		};
 
 		uart0: serial@21c0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21c0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart1: serial@21d0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21d0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart2: serial@21e0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21e0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart3: serial@21f0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21f0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		gpio0: gpio@2300000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -977,7 +1039,7 @@
 		};
 
 		gpio1: gpio@2310000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -988,7 +1050,7 @@
 		};
 
 		gpio2: gpio@2320000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -999,7 +1061,7 @@
 		};
 
 		gpio3: gpio@2330000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -1017,14 +1079,14 @@
 			timeout-sec = <30>;
 		};
 
-		rcpm: power-controller@1e34040 {
+		rcpm: wakeup-controller@1e34040 {
 			compatible = "fsl,lx2160a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1e34040 0x0 0x1c>;
 			#fsl,rcpm-wakeup-cells = <7>;
 			little-endian;
 		};
 
-		ftm_alarm0: timer@2800000 {
+		ftm_alarm0: rtc@2800000 {
 			compatible = "fsl,lx2160a-ftm-alarm";
 			reg = <0x0 0x2800000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
@@ -1120,7 +1182,7 @@
 			ppio-wins = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
@@ -1148,7 +1210,7 @@
 			ppio-wins = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
@@ -1176,7 +1238,7 @@
 			ppio-wins = <24>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
@@ -1204,7 +1266,7 @@
 			ppio-wins = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
@@ -1232,7 +1294,7 @@
 			ppio-wins = <24>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
@@ -1260,7 +1322,7 @@
 			ppio-wins = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -1385,6 +1447,9 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			little-endian;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
@@ -1395,6 +1460,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
@@ -1632,11 +1700,85 @@
 			};
 		};
 
+		pinmux_i2crv: pinmux@70010012c {
+			compatible = "pinctrl-single";
+			reg = <0x00000007 0x0010012c 0x0 0xc>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,bit-per-mux;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x7>;
+
+			i2c1_scl: i2c1-scl-pins {
+				pinctrl-single,bits = <0x0 0 0x7>;
+			};
+
+			i2c1_scl_gpio: i2c1-scl-gpio-pins {
+				pinctrl-single,bits = <0x0 0x1 0x7>;
+			};
+
+			i2c2_scl: i2c2-scl-pins {
+				pinctrl-single,bits = <0x0 0 (0x7 << 3)>;
+			};
+
+			i2c2_scl_gpio: i2c2-scl-gpio-pins {
+				pinctrl-single,bits = <0x0 (0x1 << 3) (0x7 << 3)>;
+			};
+
+			i2c3_scl: i2c3-scl-pins {
+				pinctrl-single,bits = <0x0 0 (0x7 << 6)>;
+			};
+
+			i2c3_scl_gpio: i2c3-scl-gpio-pins {
+				pinctrl-single,bits = <0x0 (0x1 << 6) (0x7 << 6)>;
+			};
+
+			i2c4_scl: i2c4-scl-pins {
+				pinctrl-single,bits = <0x0 0 (0x7 << 9)>;
+			};
+
+			i2c4_scl_gpio: i2c4-scl-gpio-pins {
+				pinctrl-single,bits = <0x0 (0x1 << 9) (0x7 << 9)>;
+			};
+
+			i2c5_scl: i2c5-scl-pins {
+				pinctrl-single,bits = <0x0 0 (0x7 << 12)>;
+			};
+
+			i2c5_scl_gpio: i2c5-scl-gpio-pins {
+				pinctrl-single,bits = <0x0 (0x1 << 12) (0x7 << 12)>;
+			};
+
+			i2c6_scl: i2c6-scl-pins {
+				pinctrl-single,bits = <0x4 0x2 0x7>;
+			};
+
+			i2c6_scl_gpio: i2c6-scl-gpio-pins {
+				pinctrl-single,bits = <0x4 0x1 0x7>;
+			};
+
+			i2c7_scl: i2c7-scl-pins {
+				pinctrl-single,bits = <0x4 0x2 0x7>;
+			};
+
+			i2c7_scl_gpio: i2c7-scl-gpio-pins {
+				pinctrl-single,bits = <0x4 0x1 0x7>;
+			};
+
+			i2c0_scl: i2c0-scl-pins {
+				pinctrl-single,bits = <0x8 0 (0x7 << 10)>;
+			};
+
+			i2c0_scl_gpio: i2c0-scl-gpio-pins {
+				pinctrl-single,bits = <0x8 (0x1 << 10) (0x7 << 10)>;
+			};
+		};
+
 		fsl_mc: fsl-mc@80c000000 {
 			compatible = "fsl,qoriq-mc";
 			reg = <0x00000008 0x0c000000 0 0x40>,
 			      <0x00000000 0x08340000 0 0x40000>;
-			msi-parent = <&its>;
+			msi-parent = <&its 0>;
 			/* iommu-map property is fixed up by u-boot */
 			iommu-map = <0 &smmu 0 0>;
 			dma-coherent;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts
new file mode 100644
index 000000000000..eafef8718a0f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2162A Clearfog
+//
+// Copyright 2023 Josua Mayer <josua@solid-run.com>
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+#include "fsl-lx2162a-sr-som.dtsi"
+
+/ {
+	model = "SolidRun LX2162A Clearfog";
+	compatible = "solidrun,lx2162a-clearfog", "solidrun,lx2162a-som", "fsl,lx2160a";
+
+	aliases {
+		crypto = &crypto;
+		i2c0 = &i2c0;
+		i2c1 = &i2c2;
+		i2c2 = &i2c4;
+		i2c3 = &sfp_i2c0;
+		i2c4 = &sfp_i2c1;
+		i2c5 = &sfp_i2c2;
+		i2c6 = &sfp_i2c3;
+		i2c7 = &mpcie1_i2c;
+		i2c8 = &mpcie0_i2c;
+		i2c9 = &pcieclk_i2c;
+		i2c10 = &i2c5;
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_sfp_at: led-sfp-at {
+			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* PROC_IRQ5 */
+			default-state = "off";
+		};
+
+		led_sfp_ab: led-sfp-ab {
+			gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; /* PROC_IRQ11 */
+			default-state = "off";
+		};
+
+		led_sfp_bt: led-sfp-bt {
+			gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; /* EVT1_B */
+			default-state = "off";
+		};
+
+		led_sfp_bb: led-sfp-bb {
+			gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; /* EVT2_B */
+			default-state = "off";
+		};
+	};
+
+	sfp_at: sfp-at {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp_i2c0>;
+		mod-def0-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; /* EVT4_B */
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp_ab: sfp-ab {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp_i2c1>;
+		mod-def0-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; /* PROC_IRQ1 */
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp_bt: sfp-bt {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp_i2c2>;
+		mod-def0-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; /* PROC_IRQ10 */
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp_bb: sfp-bb {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp_i2c3>;
+		mod-def0-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; /* EVT3_B */
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+&dpmac3 {
+	sfp = <&sfp_at>;
+	managed = "in-band-status";
+	phys = <&serdes_1 7>;
+};
+
+&dpmac4 {
+	sfp = <&sfp_ab>;
+	managed = "in-band-status";
+	phys = <&serdes_1 6>;
+};
+
+&dpmac5 {
+	sfp = <&sfp_bt>;
+	managed = "in-band-status";
+	phys = <&serdes_1 5>;
+};
+
+&dpmac6 {
+	sfp = <&sfp_bb>;
+	managed = "in-band-status";
+	phys = <&serdes_1 4>;
+};
+
+&dpmac11 {
+	phys = <&serdes_2 0>;
+	phy-handle = <&ethernet_phy3>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&dpmac12 {
+	phys = <&serdes_2 1>;
+	phy-handle = <&ethernet_phy1>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&dpmac13 {
+	phys = <&serdes_2 6>;
+	phy-handle = <&ethernet_phy6>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&dpmac14 {
+	phys = <&serdes_2 7>;
+	phy-handle = <&ethernet_phy8>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&dpmac15 {
+	phys = <&serdes_2 4>;
+	phy-handle = <&ethernet_phy4>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&dpmac16 {
+	phys = <&serdes_2 5>;
+	phy-handle = <&ethernet_phy2>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&dpmac17 {
+	/* override connection to on-SoM phy */
+	/delete-property/ phy-handle;
+	/delete-property/ phy-connection-type;
+
+	phys = <&serdes_2 2>;
+	phy-handle = <&ethernet_phy5>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&dpmac18 {
+	phys = <&serdes_2 3>;
+	phy-handle = <&ethernet_phy7>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&emdio1 {
+	ethernet_phy1: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+		max-speed = <1000>;
+	};
+
+	ethernet_phy2: ethernet-phy@9 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <9>;
+		max-speed = <1000>;
+	};
+
+	ethernet_phy3: ethernet-phy@10 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <10>;
+		max-speed = <1000>;
+	};
+
+	ethernet_phy4: ethernet-phy@11 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <11>;
+		max-speed = <1000>;
+	};
+
+	ethernet_phy5: ethernet-phy@12 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <12>;
+		max-speed = <1000>;
+	};
+
+	ethernet_phy6: ethernet-phy@13 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <13>;
+		max-speed = <1000>;
+	};
+
+	ethernet_phy7: ethernet-phy@14 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <14>;
+		max-speed = <1000>;
+	};
+
+	ethernet_phy8: ethernet-phy@15 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <15>;
+		max-speed = <1000>;
+	};
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&ethernet_phy0 {
+	/*
+	 * SoM has a phy at address 1 connected to SoC Ethernet Controller 1.
+	 * It competes for WRIOP MAC17, and no connector has been wired.
+	 */
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* retimer@18 */
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		sfp_i2c0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		sfp_i2c1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		sfp_i2c2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		sfp_i2c3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		mpcie1_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		mpcie0_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		pcieclk_i2c: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			/* clock-controller@6b */
+		};
+	};
+};
+
+&pcie3 {
+	status = "disabled";
+};
+
+&pcie4 {
+	status = "disabled";
+};
+
+&pcs_mdio3 {
+	status = "okay";
+};
+
+&pcs_mdio4 {
+	status = "okay";
+};
+
+&pcs_mdio5 {
+	status = "okay";
+};
+
+&pcs_mdio6 {
+	status = "okay";
+};
+
+&pcs_mdio11 {
+	status = "okay";
+};
+
+&pcs_mdio12 {
+	status = "okay";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&pcs_mdio15 {
+	status = "okay";
+};
+
+&pcs_mdio16 {
+	status = "okay";
+};
+
+&pcs_mdio17 {
+	status = "okay";
+};
+
+&pcs_mdio18 {
+	status = "okay";
+};
+
+&serdes_1 {
+	status = "okay";
+};
+
+&serdes_2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi
new file mode 100644
index 000000000000..e914291e63a1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2162A-SOM
+//
+// Copyright 2021 Rabeeh Khoury <rabeeh@solid-run.com>
+// Copyright 2023 Josua Mayer <josua@solid-run.com>
+
+&crypto {
+	status = "okay";
+};
+
+&dpmac17 {
+	phy-handle = <&ethernet_phy0>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+
+	ethernet_phy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	fan-controller@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+	};
+
+	ddr_spd: eeprom@51 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x51>;
+		read-only;
+	};
+
+	config_eeprom: eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	variable_eeprom: eeprom@54 {
+		compatible = "st,24c2048", "atmel,24c2048";
+		reg = <0x54>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx-pcie0-ep.dtso b/arch/arm64/boot/dts/freescale/imx-pcie0-ep.dtso
new file mode 100644
index 000000000000..ed73284d9bb6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx-pcie0-ep.dtso
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+&pcie0 {
+	status = "disabled";
+};
+
+&pcie0_ep {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx-pcie1-ep.dtso b/arch/arm64/boot/dts/freescale/imx-pcie1-ep.dtso
new file mode 100644
index 000000000000..0e7ef7ef8560
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx-pcie1-ep.dtso
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+&pcie1 {
+	status = "disabled";
+};
+
+&pcie1_ep {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.1.dtsi
new file mode 100644
index 000000000000..0f77f78f4d96
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.1.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+#include "imx8-apalis-eval.dtsi"
+
+/* Apalis CAN1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	status = "okay";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	status = "okay";
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.2.dtsi
new file mode 100644
index 000000000000..5862b24fb764
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.2.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+#include "imx8-apalis-eval.dtsi"
+
+/ {
+	reg_3v3_mmc: regulator-3v3-mmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_mmc>;
+		enable-active-high;
+		gpio = <&lsio_gpio5 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_MMC";
+		startup-delay-us = <10000>;
+	};
+
+	reg_3v3_sd: regulator-3v3-sd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_sd>;
+		enable-active-high;
+		gpio = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_SD";
+		startup-delay-us = <10000>;
+	};
+
+	reg_can1: regulator-can1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can1_power>;
+		enable-active-high;
+		gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>;
+		regulator-name = "5V_SW_CAN1";
+		startup-delay-us = <10000>;
+	};
+
+	reg_can2: regulator-can2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can2_power>;
+		enable-active-high;
+		gpio = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
+		regulator-name = "5V_SW_CAN2";
+		startup-delay-us = <10000>;
+	};
+
+	sound-carrier {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,name = "apalis-nau8822";
+		simple-audio-card,routing =
+			"Headphones", "LHP",
+			"Headphones", "RHP",
+			"Speaker", "LSPK",
+			"Speaker", "RSPK",
+			"Line Out", "AUXOUT1",
+			"Line Out", "AUXOUT2",
+			"LAUX", "Line In",
+			"RAUX", "Line In",
+			"LMICP", "Mic In",
+			"RMICP", "Mic In";
+		simple-audio-card,widgets =
+			"Headphones", "Headphones",
+			"Line Out", "Line Out",
+			"Speaker", "Speaker",
+			"Microphone", "Mic In",
+			"Line", "Line In";
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&nau8822_1a>;
+			system-clock-frequency = <12288000>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai0>;
+		};
+	};
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	xceiver-supply = <&reg_can1>;
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	xceiver-supply = <&reg_can2>;
+	status = "okay";
+};
+
+/* Apalis I2C1 */
+&i2c2 {
+	status = "okay";
+
+	/* Audio Codec */
+	nau8822_1a: audio-codec@1a {
+		compatible = "nuvoton,nau8822";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+	};
+
+	/* Power/Current Measurement Sensor */
+	hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <5000>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&sai0 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai0_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai0>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3_mmc>;
+	status = "okay";
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	vmmc-supply = <&reg_3v3_sd>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_cam1_gpios>,
+		    <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_keys>,
+		    <&pinctrl_gpio_usbh_oc_n>, <&pinctrl_lpuart1ctrl>,
+		    <&pinctrl_lvds0_i2c0_gpio>, <&pinctrl_lvds1_i2c0_gpios>,
+		    <&pinctrl_mipi_dsi_0_1_en>, <&pinctrl_mipi_dsi1_gpios>,
+		    <&pinctrl_mlb_gpios>, <&pinctrl_qspi1a_gpios>,
+		    <&pinctrl_sata1_act>, <&pinctrl_sim0_gpios>,
+		    <&pinctrl_usdhc1_gpios>;
+
+	pinctrl_enable_3v3_mmc: enable3v3mmcgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_LSIO_GPIO5_IO19	0x00000021>; /* MXM3_148 */
+	};
+
+	pinctrl_enable_3v3_sd: enable3v3sdgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20	0x00000021>; /* MXM3_152 */
+	};
+
+	pinctrl_enable_can1_power: enablecan1powergrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22	0x00000021>; /* MXM3_158 */
+	};
+
+	pinctrl_enable_can2_power: enablecan2powergrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21	0x00000021>; /* MXM3_156 */
+	};
+
+	pinctrl_sai0: sai0grp {
+		fsl,pins = <IMX8QM_SAI1_RXC_AUD_SAI0_TXD	0xc600006c>, /* MXM3_196 */
+			   <IMX8QM_SPI0_CS1_AUD_SAI0_TXC	0xc600004c>, /* MXM3_200 */
+			   <IMX8QM_SAI1_RXFS_AUD_SAI0_RXD	0xc600004c>, /* MXM3_202 */
+			   <IMX8QM_SPI2_CS1_AUD_SAI0_TXFS	0xc600004c>; /* MXM3_204 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
new file mode 100644
index 000000000000..311d4950793c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		regulator-name = "VCC USBH2(ABCD) / USBH(3|4)";
+	};
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&amix {
+	status = "okay";
+};
+
+&asrc0 {
+	status = "okay";
+};
+
+/* TODO: Display Controller */
+
+/* TODO: DPU */
+
+/* Apalis ETH1 */
+&fec1 {
+	status = "okay";
+};
+
+/* Apalis I2C1 */
+&i2c2 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		status = "okay";
+	};
+};
+
+/* Apalis I2C3 (CAM) */
+&i2c3 {
+	status = "okay";
+};
+
+/* Apalis SPI1 */
+&lpspi0 {
+	status = "okay";
+};
+
+/* Apalis SPI2 */
+&lpspi2 {
+	status = "okay";
+};
+
+/* Apalis UART3 */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Apalis UART1 */
+&lpuart1 {
+	status = "okay";
+};
+
+/* Apalis UART4 */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Apalis UART2 */
+&lpuart3 {
+	status = "okay";
+};
+
+/* Apalis PWM3, MXM3 pin 6 */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Apalis PWM4, MXM3 pin 8 */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Apalis PWM1, MXM3 pin 2 */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Apalis PWM2, MXM3 pin 4 */
+&lsio_pwm3 {
+	status = "okay";
+};
+
+/* Apalis PCIE1 */
+&pciea {
+	status = "okay";
+};
+
+/* TODO: Apalis BKL1_PWM */
+
+/* Apalis DAP1 */
+&sai1 {
+	status = "okay";
+};
+
+&sai5 {
+	status = "okay";
+};
+
+&sai5_lpcg {
+	status = "okay";
+};
+
+/* Apalis SATA1 */
+&sata {
+	status = "okay";
+};
+
+/* Apalis SPDIF1 */
+&spdif0 {
+	status = "okay";
+};
+
+/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
+
+/* Apalis USBO1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* Apalis USBH4 SuperSpeed */
+&usbotg3_cdns3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
new file mode 100644
index 000000000000..3d8731504ce1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		/* LED_4_GREEN / MXM3_188 */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_4_RED / MXM3_178 */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_5_GREEN / MXM3_152 */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_5_RED / MXM3_156 */
+		led-4 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		regulator-name = "VCC_USBH(2|4)";
+	};
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&amix {
+	status = "okay";
+};
+
+&asrc0 {
+	status = "okay";
+};
+
+/* TODO: Display Controller */
+
+/* TODO: DPU */
+
+/* Apalis ETH1 */
+&fec1 {
+	status = "okay";
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	status = "okay";
+};
+
+/* TODO: GPU */
+
+/* Apalis I2C1 */
+&i2c2 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		status = "okay";
+	};
+};
+
+/* Apalis I2C3 (CAM) */
+&i2c3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>,
+		    <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_usbh_oc_n>,
+		    <&pinctrl_lpuart1ctrl>, <&pinctrl_lvds0_i2c0_gpio>,
+		    <&pinctrl_lvds1_i2c0_gpios>, <&pinctrl_mipi_dsi_0_1_en>,
+		    <&pinctrl_mipi_dsi1_gpios>, <&pinctrl_mlb_gpios>,
+		    <&pinctrl_qspi1a_gpios>, <&pinctrl_sata1_act>,
+		    <&pinctrl_sim0_gpios>, <&pinctrl_uart24_forceoff>,
+		    <&pinctrl_usdhc1_gpios>;
+
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <IMX8QM_USDHC2_DATA1_LSIO_GPIO5_IO27	0x06000061>, /* LED_4_GREEN */
+			   <IMX8QM_USDHC2_DATA3_LSIO_GPIO5_IO29	0x06000061>, /* LED_4_RED */
+			   <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20	0x06000061>, /* LED_5_GREEN */
+			   <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21	0x06000061>; /* LED_5_RED */
+	};
+
+	pinctrl_uart24_forceoff: uart24forceoffgrp {
+		fsl,pins = <IMX8QM_USDHC2_CMD_LSIO_GPIO5_IO25		0x00000021>;
+	};
+};
+
+/* Apalis SPI1 */
+&lpspi0 {
+	status = "okay";
+};
+
+/* Apalis SPI2 */
+&lpspi2 {
+	status = "okay";
+};
+
+/* Apalis UART3 */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Apalis UART1 */
+&lpuart1 {
+	status = "okay";
+};
+
+/* Apalis UART4 */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Apalis UART2 */
+&lpuart3 {
+	status = "okay";
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "gpio5-00", "gpio5-01", "gpio5-02", "gpio5-03",
+			  "gpio5-04", "gpio5-05", "gpio5-06", "gpio5-07",
+			  "gpio5-08", "gpio5-09", "gpio5-10", "gpio5-11",
+			  "gpio5-12", "gpio5-13", "gpio5-14", "gpio5-15",
+			  "gpio5-16", "gpio5-17", "gpio5-18", "gpio5-19",
+			  "LED-5-GREEN", "LED-5-RED", "gpio5-22", "gpio5-23",
+			  "gpio5-24", "UART24-FORCEOFF", "gpio5-26",
+			  "LED-4-GREEN", "gpio5-28", "LED-4-RED", "gpio5-30",
+			  "gpio5-31";
+};
+
+/* Apalis PWM3, MXM3 pin 6 */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Apalis PWM4, MXM3 pin 8 */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Apalis PWM1, MXM3 pin 2 */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Apalis PWM2, MXM3 pin 4 */
+&lsio_pwm3 {
+	status = "okay";
+};
+
+/* Apalis PCIE1 */
+&pciea {
+	status = "okay";
+};
+
+/* TODO: Apalis BKL1_PWM */
+
+/* Apalis DAP1 */
+&sai1 {
+	status = "okay";
+};
+
+&sai5 {
+	status = "okay";
+};
+
+&sai5_lpcg {
+	status = "okay";
+};
+
+/* Apalis SATA1 */
+&sata {
+	status = "okay";
+};
+
+/* Apalis SPDIF1 */
+&spdif0 {
+	status = "okay";
+};
+
+/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
+
+/* Apalis USBO1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* Apalis USBH4 SuperSpeed */
+&usbotg3_cdns3 {
+	status = "okay";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>;
+	bus-width = <4>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
new file mode 100644
index 000000000000..106e802a68ba
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		/* LED_4_GREEN / MXM3_188 */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_4_RED / MXM3_178 */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_5_GREEN / MXM3_152 */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_5_RED / MXM3_156 */
+		led-4 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+		/* MMC1_PWR_CTRL */
+		gpio = <&lsio_gpio5 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3_vmmc";
+	};
+
+	reg_can1_supply: regulator-can1-supply {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can1_power>;
+		gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "can1_supply";
+		startup-delay-us = <1000>;
+	};
+
+	reg_can2_supply: regulator-can2-supply {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sata1_act>;
+		gpio = <&lsio_gpio2 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "can2_supply";
+		startup-delay-us = <1000>;
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		regulator-name = "VCC_USBH(2|4)";
+	};
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&amix {
+	status = "okay";
+};
+
+&asrc0 {
+	status = "okay";
+};
+
+/* TODO: Display Controller */
+
+/* TODO: DPU */
+
+/* Apalis ETH1 */
+&fec1 {
+	status = "okay";
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	xceiver-supply = <&reg_can1_supply>;
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	xceiver-supply = <&reg_can2_supply>;
+	status = "okay";
+};
+
+/* TODO: GPU */
+
+/* Apalis I2C1 */
+&i2c2 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		status = "okay";
+	};
+};
+
+/* Apalis I2C3 (CAM) */
+&i2c3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>,
+		    <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_usbh_oc_n>,
+		    <&pinctrl_lpuart1ctrl>, <&pinctrl_lvds0_i2c0_gpio>,
+		    <&pinctrl_lvds1_i2c0_gpios>, <&pinctrl_mipi_dsi_0_1_en>,
+		    <&pinctrl_mipi_dsi1_gpios>, <&pinctrl_mlb_gpios>,
+		    <&pinctrl_qspi1a_gpios>, <&pinctrl_sim0_gpios>,
+		    <&pinctrl_uart24_forceoff>, <&pinctrl_usdhc1_gpios>;
+
+	/* PMIC MMC1 power-switch */
+	pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_LSIO_GPIO5_IO19	0x00000021>; /* MXM3_148, PMIC */
+	};
+
+	/* FlexCAN PMIC */
+	pinctrl_enable_can1_power: enablecan1powergrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22	0x00000021>; /* MXM3_158, PMIC */
+	};
+
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <IMX8QM_USDHC2_DATA1_LSIO_GPIO5_IO27	0x06000061>, /* LED_4_GREEN */
+			   <IMX8QM_USDHC2_DATA3_LSIO_GPIO5_IO29	0x06000061>, /* LED_4_RED */
+			   <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20	0x06000061>, /* LED_5_GREEN */
+			   <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21	0x06000061>; /* LED_5_RED */
+	};
+
+	pinctrl_uart24_forceoff: uart24forceoffgrp {
+		fsl,pins = <IMX8QM_USDHC2_CMD_LSIO_GPIO5_IO25		0x00000021>;
+	};
+};
+
+/* Apalis SPI1 */
+&lpspi0 {
+	status = "okay";
+};
+
+/* Apalis SPI2 */
+&lpspi2 {
+	status = "okay";
+};
+
+/* Apalis UART3 */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Apalis UART1 */
+&lpuart1 {
+	status = "okay";
+};
+
+/* Apalis UART4 */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Apalis UART2 */
+&lpuart3 {
+	status = "okay";
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "gpio5-00", "gpio5-01", "gpio5-02", "gpio5-03",
+			  "gpio5-04", "gpio5-05", "gpio5-06", "gpio5-07",
+			  "gpio5-08", "gpio5-09", "gpio5-10", "gpio5-11",
+			  "gpio5-12", "gpio5-13", "gpio5-14", "gpio5-15",
+			  "gpio5-16", "gpio5-17", "gpio5-18", "gpio5-19",
+			  "LED-5-GREEN", "LED-5-RED", "gpio5-22", "gpio5-23",
+			  "gpio5-24", "UART24-FORCEOFF", "gpio5-26",
+			  "LED-4-GREEN", "gpio5-28", "LED-4-RED", "gpio5-30",
+			  "gpio5-31";
+};
+
+/* Apalis PWM3, MXM3 pin 6 */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Apalis PWM4, MXM3 pin 8 */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Apalis PWM1, MXM3 pin 2 */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Apalis PWM2, MXM3 pin 4 */
+&lsio_pwm3 {
+	status = "okay";
+};
+
+/* Apalis PCIE1 */
+&pciea {
+	status = "okay";
+};
+
+/* TODO: Apalis BKL1_PWM */
+
+/* Apalis DAP1 */
+&sai1 {
+	status = "okay";
+};
+
+&sai5 {
+	status = "okay";
+};
+
+&sai5_lpcg {
+	status = "okay";
+};
+
+/* Apalis SATA1 */
+&sata {
+	status = "okay";
+};
+
+/* Apalis SPDIF1 */
+&spdif0 {
+	status = "okay";
+};
+
+/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
+
+/* Apalis USBO1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* Apalis USBH4 SuperSpeed */
+&usbotg3_cdns3 {
+	status = "okay";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>;
+	bus-width = <4>;
+	cap-power-off-card;
+	/delete-property/ no-1-8-v;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
new file mode 100644
index 000000000000..86d018f470c1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
@@ -0,0 +1,1626 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	/* Apalis BKL1 */
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bkl_on>;
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		enable-gpios = <&lsio_gpio1 4 GPIO_ACTIVE_HIGH>; /* Apalis BKL1_ON */
+		/* TODO: hook-up to Apalis BKL1_PWM */
+		status = "disabled";
+	};
+
+	gpio_fan: gpio-fan {
+		compatible = "gpio-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio8>;
+		gpios = <&lsio_gpio3 28 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <	 0 0
+				      3000 1>;
+	};
+
+	/* TODO: LVDS Panel */
+
+	/* TODO: Shared PCIe/SATA Reference Clock */
+
+	/* TODO: PCIe Wi-Fi Reference Clock */
+
+	/*
+	 * Power management bus used to control LDO1OUT of the
+	 * second PMIC PF8100. This is used for controlling voltage levels of
+	 * typespecific RGMII signals and Apalis UART2_RTS UART2_CTS.
+	 *
+	 * IMX_SC_R_BOARD_R1 for 3.3V
+	 * IMX_SC_R_BOARD_R2 for 1.8V
+	 * IMX_SC_R_BOARD_R3 for 2.5V
+	 * Note that for 2.5V operation the pad muxing needs to be changed,
+	 * compare with PSW_OVR field of IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD.
+	 *
+	 * those power domains are mutually exclusive.
+	 */
+	reg_ext_rgmii: regulator-ext-rgmii {
+		compatible = "regulator-fixed";
+		power-domains = <&pd IMX_SC_R_BOARD_R1>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_EXT_RGMII (LDO1)";
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3";
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_AUDIO";
+	};
+
+	reg_module_wifi: regulator-module-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_pdn>;
+		gpio = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-name = "wifi_pwrdn_fake_regulator";
+		regulator-settling-time-us = <100>;
+	};
+
+	reg_pcie_switch: regulator-pcie-switch {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio7>;
+		gpio = <&lsio_gpio3 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "pcie_switch";
+		startup-delay-us = <100000>;
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_en>;
+		/* Apalis USBH_EN */
+		gpio = <&lsio_gpio4 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-host-vbus";
+	};
+
+	reg_usb_hsic: regulator-usb-hsic {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3000000>;
+		regulator-min-microvolt = <3000000>;
+		regulator-name = "usb-hsic-dummy";
+	};
+
+	reg_usb_phy: regulator-usb-hsic1 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3000000>;
+		regulator-min-microvolt = <3000000>;
+		regulator-name = "usb-phy-dummy";
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		decoder_boot: decoder-boot@84000000 {
+			reg = <0 0x84000000 0 0x2000000>;
+			no-map;
+		};
+
+		encoder1_boot: encoder1-boot@86000000 {
+			reg = <0 0x86000000 0 0x200000>;
+			no-map;
+		};
+
+		encoder2_boot: encoder2-boot@86200000 {
+			reg = <0 0x86200000 0 0x200000>;
+			no-map;
+		};
+
+		/*
+		 * reserved-memory layout
+		 * 0x8800_0000 ~ 0x8FFF_FFFF is reserved for M4
+		 * Shouldn't be used at A core and Linux side.
+		 *
+		 */
+		m4_reserved: m4@88000000 {
+			reg = <0 0x88000000 0 0x8000000>;
+			no-map;
+		};
+
+		rpmsg_reserved: rpmsg@90200000 {
+			reg = <0 0x90200000 0 0x200000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@90400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90400000 0 0x100000>;
+			no-map;
+		};
+
+		decoder_rpc: decoder-rpc@92000000 {
+			reg = <0 0x92000000 0 0x200000>;
+			no-map;
+		};
+
+		dsp_reserved: dsp@92400000 {
+			reg = <0 0x92400000 0 0x2000000>;
+			no-map;
+		};
+
+		encoder1_rpc: encoder1-rpc@94400000 {
+			reg = <0 0x94400000 0 0x700000>;
+			no-map;
+		};
+
+		encoder2_rpc: encoder2-rpc@94b00000 {
+			reg = <0 0x94b00000 0 0x700000>;
+			no-map;
+		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0xc0000000 0 0x3c000000>;
+			linux,cma-default;
+			reusable;
+			size = <0 0x3c000000>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,name = "apalis-imx8qm";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+
+	/* TODO: HDMI Audio */
+
+	/* Apalis SPDIF1 */
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif0>;
+		spdif-in;
+		spdif-out;
+	};
+
+	touchscreen: touchscreen {
+		compatible = "toradex,vf50-touchscreen";
+		interrupt-parent = <&lsio_gpio3>;
+		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "idle", "default";
+		pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>;
+		pinctrl-1 = <&pinctrl_adc1>, <&pinctrl_touchctrl_gpios>;
+		io-channels = <&adc1 2>, <&adc1 1>,
+			      <&adc1 0>, <&adc1 3>;
+		vf50-ts-min-pressure = <200>;
+		xp-gpios = <&lsio_gpio2 4 GPIO_ACTIVE_LOW>;
+		xm-gpios = <&lsio_gpio2 5 GPIO_ACTIVE_HIGH>;
+		yp-gpios = <&lsio_gpio2 17 GPIO_ACTIVE_LOW>;
+		ym-gpios = <&lsio_gpio2 21 GPIO_ACTIVE_HIGH>;
+		/*
+		 * NOTE: you must remove the pinctrl-adc1 from the adc1
+		 * node below to use the touchscreen
+		 */
+		status = "disabled";
+	};
+
+};
+
+&asrc0 {
+	fsl,asrc-rate = <48000>;
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0>;
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+};
+
+/* TODO: Asynchronous Sample Rate Converter (ASRC) */
+
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_alert1 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <105000>;
+};
+
+&cpu_crit1 {
+	temperature = <105000>;
+};
+
+&drc_alert0 {
+	temperature = <95000>;
+};
+
+&drc_crit0 {
+	temperature = <105000>;
+};
+
+/* Apalis ETH1 */
+&fec1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-1 = <&pinctrl_fec1_sleep>;
+	fsl,magic-packet;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <7>;
+			interrupt-parent = <&lsio_gpio1>;
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <0>;
+			reset-assert-us = <2>;
+			reset-deassert-us = <2>;
+			reset-gpios = <&lsio_gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+/* Apalis CAN3 (optional) */
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan3>;
+};
+
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-pcieb-sata";
+	fsl,refclk-pad-mode = "input";
+	status = "okay";
+};
+
+&hsio_refa_clk {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_sata_refclk>;
+	enable-gpios = <&lsio_gpio4 11 GPIO_ACTIVE_HIGH>;
+};
+
+&hsio_refb_clk {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_wifi_refclk>;
+	clocks = <&hsio_refa_clk>;
+	enable-gpios = <&lsio_gpio2 11 GPIO_ACTIVE_HIGH>;
+};
+
+/* TODO: Apalis HDMI1 */
+
+&gpu_alert0 {
+	temperature = <95000>;
+};
+
+&gpu_alert1 {
+	temperature = <95000>;
+};
+
+&gpu_crit0 {
+	temperature = <105000>;
+};
+
+&gpu_crit1 {
+	temperature = <105000>;
+};
+
+/* On-module I2C */
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* USB3503A */
+	usb-hub@8 {
+		compatible = "smsc,usb3503a";
+		reg = <0x08>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb3503a>;
+		connect-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_LOW>;
+		initial-mode = <1>;
+		intn-gpios = <&lsio_gpio1 1 GPIO_ACTIVE_HIGH>;
+		refclk-frequency = <25000000>;
+		reset-gpios = <&lsio_gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+	
+	/* On Module Audio Codec */
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+				  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
+		clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_module_3v3_avdd>;
+		VDDD-supply = <&reg_vref_1v8>;
+		VDDIO-supply = <&reg_module_3v3>;
+	};
+};
+
+/* Apalis I2C1 */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+
+	atmel_mxt_ts: touch@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&lsio_gpio4>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;		/* Apalis GPIO5 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio5>, <&pinctrl_gpio6>;
+		reset-gpios = <&lsio_gpio4 2 GPIO_ACTIVE_LOW>;	/* Apalis GPIO6 */
+		status = "disabled";
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+		status = "disabled";
+	};
+};
+
+/* Apalis I2C3 (CAM) */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+};
+
+&jpegdec {
+	status = "okay";
+};
+
+&jpegenc {
+	status = "okay";
+};
+
+/* TODO: Apalis LVDS1 */
+
+/* Apalis SPI1 */
+&lpspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&lsio_gpio3 5 GPIO_ACTIVE_LOW>;
+};
+
+/* Apalis SPI2 */
+&lpspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&lsio_gpio3 10 GPIO_ACTIVE_LOW>;
+};
+
+/* Apalis UART3 */
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+};
+
+/* Apalis UART1 */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+};
+
+/* Apalis UART4 */
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+};
+
+/* Apalis UART2 */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+};
+
+&lsio_gpio0 {
+	gpio-line-names = "MXM3_279",
+			  "MXM3_277",
+			  "MXM3_135",
+			  "MXM3_203",
+			  "MXM3_201",
+			  "MXM3_275",
+			  "MXM3_110",
+			  "MXM3_120",
+			  "MXM3_1/GPIO1",
+			  "MXM3_3/GPIO2",
+			  "MXM3_124",
+			  "MXM3_122",
+			  "MXM3_5/GPIO3",
+			  "MXM3_7/GPIO4",
+			  "",
+			  "",
+			  "MXM3_4",
+			  "MXM3_211",
+			  "MXM3_209",
+			  "MXM3_2",
+			  "MXM3_136",
+			  "MXM3_134",
+			  "MXM3_6",
+			  "MXM3_8",
+			  "MXM3_112",
+			  "MXM3_118",
+			  "MXM3_114",
+			  "MXM3_116",
+			  "",
+			  "",
+			  "MXM3_26";
+};
+
+&lsio_gpio1 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_286",
+			  "",
+			  "MXM3_87",
+			  "MXM3_99",
+			  "MXM3_138",
+			  "MXM3_140",
+			  "MXM3_239",
+			  "",
+			  "MXM3_281",
+			  "MXM3_283",
+			  "MXM3_126",
+			  "MXM3_132",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_173",
+			  "MXM3_175",
+			  "MXM3_123";
+
+	hdmi-ctrl-hog {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hdmi_ctrl>;
+		gpio-hog;
+		gpios = <30 GPIO_ACTIVE_HIGH>;
+		line-name = "CONNECTOR_IS_HDMI";
+		/* Set signals depending on HDP device type, 0 DP, 1 HDMI */
+		output-high;
+	};
+};
+
+&lsio_gpio2 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_198",
+			  "MXM3_35",
+			  "MXM3_164",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_217",
+			  "MXM3_215",
+			  "",
+			  "",
+			  "MXM3_193",
+			  "MXM3_194",
+			  "MXM3_37",
+			  "",
+			  "MXM3_271",
+			  "MXM3_273",
+			  "MXM3_195",
+			  "MXM3_197",
+			  "MXM3_177",
+			  "MXM3_179",
+			  "MXM3_181",
+			  "MXM3_183",
+			  "MXM3_185",
+			  "MXM3_187";
+};
+
+&lsio_gpio3 {
+	gpio-line-names = "MXM3_191",
+			  "",
+			  "MXM3_221",
+			  "MXM3_225",
+			  "MXM3_223",
+			  "MXM3_227",
+			  "MXM3_200",
+			  "MXM3_235",
+			  "MXM3_231",
+			  "MXM3_229",
+			  "MXM3_233",
+			  "MXM3_204",
+			  "MXM3_196",
+			  "",
+			  "MXM3_202",
+			  "",
+			  "",
+			  "",
+			  "MXM3_305",
+			  "MXM3_307",
+			  "MXM3_309",
+			  "MXM3_311",
+			  "MXM3_315",
+			  "MXM3_317",
+			  "MXM3_319",
+			  "MXM3_321",
+			  "MXM3_15/GPIO7",
+			  "MXM3_63",
+			  "MXM3_17/GPIO8",
+			  "MXM3_12",
+			  "MXM3_14",
+			  "MXM3_16";
+};
+
+&lsio_gpio4 {
+	gpio-line-names = "MXM3_18",
+			  "MXM3_11/GPIO5",
+			  "MXM3_13/GPIO6",
+			  "MXM3_274",
+			  "MXM3_84",
+			  "MXM3_262",
+			  "MXM3_96",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_190",
+			  "",
+			  "",
+			  "",
+			  "MXM3_269",
+			  "MXM3_251",
+			  "MXM3_253",
+			  "MXM3_295",
+			  "MXM3_299",
+			  "MXM3_301",
+			  "MXM3_297",
+			  "MXM3_293",
+			  "MXM3_291",
+			  "MXM3_289",
+			  "MXM3_287";
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_150",
+			  "MXM3_160",
+			  "MXM3_162",
+			  "MXM3_144",
+			  "MXM3_146",
+			  "MXM3_148",
+			  "MXM3_152",
+			  "MXM3_156",
+			  "MXM3_158",
+			  "MXM3_159",
+			  "MXM3_184",
+			  "MXM3_180",
+			  "MXM3_186",
+			  "MXM3_188",
+			  "MXM3_176",
+			  "MXM3_178";
+};
+
+&lsio_gpio6 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_261",
+			  "MXM3_263",
+			  "MXM3_259",
+			  "MXM3_257",
+			  "MXM3_255",
+			  "MXM3_128",
+			  "MXM3_130",
+			  "MXM3_265",
+			  "MXM3_249",
+			  "MXM3_247",
+			  "MXM3_245",
+			  "MXM3_243";
+};
+
+/* Apalis PWM3, MXM3 pin 6 */
+&lsio_pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+	#pwm-cells = <3>;
+};
+
+/* Apalis PWM4, MXM3 pin 8 */
+&lsio_pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	#pwm-cells = <3>;
+};
+
+/* Apalis PWM1, MXM3 pin 2 */
+&lsio_pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	#pwm-cells = <3>;
+};
+
+/* Apalis PWM2, MXM3 pin 4 */
+&lsio_pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	#pwm-cells = <3>;
+};
+
+/* Messaging Units */
+&mu_m0 {
+	status = "okay";
+};
+
+&mu1_m0 {
+	status = "okay";
+};
+
+&mu2_m0 {
+	status = "okay";
+};
+
+/* Apalis PCIE1 */
+&pciea {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	reset-gpio = <&lsio_gpio0 30 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_switch>;
+};
+
+/* On-module Wi-Fi */
+&pcieb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcieb>, <&pinctrl_wifi>;
+	phys = <&hsio_phy 1 PHY_TYPE_PCIE 1>;
+	phy-names = "pcie-phy";
+	reset-gpio = <&lsio_gpio5 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&phyx2_lpcg {
+	clocks = <&hsio_refa_clk>, <&hsio_refb_clk>,
+		 <&hsio_refa_clk>, <&hsio_per_clk>;
+};
+
+/* TODO: Apalis BKL1_PWM */
+
+/* Apalis DAP1 */
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+/* Apalis HDMI Audio */
+&sai5 {
+	assigned-clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
+			  <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai5_lpcg 0>;
+	assigned-clock-parents = <&aud_pll_div0_lpcg 0>, <&aud_rec1_lpcg 0>;
+	assigned-clock-rates = <0>, <0>, <786432000>, <49152000>, <12288000>,
+			       <722534400>, <45158400>, <11289600>, <49152000>;
+};
+
+/* Apalis SPDIF1 */
+&spdif0 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif0>;
+	status = "okay";
+};
+
+/* TODO: Thermal Zones */
+
+/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
+
+/* Apalis USBH4 */
+&usb3_phy {
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "host";
+};
+
+/* Apalis USBO1 */
+&usbphy1 {
+	phy-3p0-supply = <&reg_usb_phy>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	adp-disable;
+	hnp-disable;
+	over-current-active-low;
+	power-active-high;
+	srp-disable;
+};
+
+/* On-module eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2_4bit>,
+		    <&pinctrl_usdhc2_8bit>,
+		    <&pinctrl_mmc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>,
+		    <&pinctrl_usdhc2_8bit_100mhz>,
+		    <&pinctrl_mmc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>,
+		    <&pinctrl_usdhc2_8bit_200mhz>,
+		    <&pinctrl_mmc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>,
+		    <&pinctrl_usdhc2_8bit_sleep>,
+		    <&pinctrl_mmc1_cd_sleep>;
+	bus-width = <8>;
+	cd-gpios = <&lsio_gpio2 9 GPIO_ACTIVE_LOW>; /* Apalis MMC1_CD# */
+	no-1-8-v;
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_sd1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_sd1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_sd1_cd>;
+	bus-width = <4>;
+	cd-gpios = <&lsio_gpio4 12 GPIO_ACTIVE_LOW>; /* Apalis SD1_CD# */
+	no-1-8-v;
+};
+
+/* Video Processing Unit */
+&vpu {
+	compatible = "nxp,imx8qm-vpu";
+	status = "okay";
+};
+
+&vpu_core0 {
+	reg = <0x2d080000 0x10000>;
+	memory-region = <&decoder_boot>, <&decoder_rpc>;
+	status = "okay";
+};
+
+&vpu_core1 {
+	reg = <0x2d090000 0x10000>;
+	memory-region = <&encoder1_boot>, <&encoder1_rpc>;
+	status = "okay";
+};
+
+&vpu_core2 {
+	reg = <0x2d0a0000 0x10000>;
+	memory-region = <&encoder2_boot>, <&encoder2_rpc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>,
+		    <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_keys>,
+		    <&pinctrl_gpio_usbh_oc_n>, <&pinctrl_lpuart1ctrl>,
+		    <&pinctrl_lvds0_i2c0_gpio>, <&pinctrl_lvds1_i2c0_gpios>,
+		    <&pinctrl_mipi_dsi_0_1_en>, <&pinctrl_mipi_dsi1_gpios>,
+		    <&pinctrl_mlb_gpios>, <&pinctrl_qspi1a_gpios>,
+		    <&pinctrl_sata1_act>, <&pinctrl_sim0_gpios>,
+		    <&pinctrl_usdhc1_gpios>;
+
+	/* Apalis AN1_ADC */
+	pinctrl_adc0: adc0grp {
+		fsl,pins = /* Apalis AN1_ADC0 */
+			   <IMX8QM_ADC_IN0_DMA_ADC0_IN0				0xc0000060>,
+			   /* Apalis AN1_ADC1 */
+			   <IMX8QM_ADC_IN1_DMA_ADC0_IN1				0xc0000060>,
+			   /* Apalis AN1_ADC2 */
+			   <IMX8QM_ADC_IN2_DMA_ADC0_IN2				0xc0000060>,
+			   /* Apalis AN1_TSWIP_ADC3 */
+			   <IMX8QM_ADC_IN3_DMA_ADC0_IN3				0xc0000060>;
+	};
+
+	/* Apalis AN1_TS */
+	pinctrl_adc1: adc1grp {
+		fsl,pins = /* Apalis AN1_TSPX */
+			   <IMX8QM_ADC_IN4_DMA_ADC1_IN0				0xc0000060>,
+			   /* Apalis AN1_TSMX */
+			   <IMX8QM_ADC_IN5_DMA_ADC1_IN1				0xc0000060>,
+			   /* Apalis AN1_TSPY */
+			   <IMX8QM_ADC_IN6_DMA_ADC1_IN2				0xc0000060>,
+			   /* Apalis AN1_TSMY */
+			   <IMX8QM_ADC_IN7_DMA_ADC1_IN3				0xc0000060>;
+	};
+
+	/* Apalis CAM1 */
+	pinctrl_cam1_gpios: cam1gpiosgrp {
+		fsl,pins = /* Apalis CAM1_D7 */
+			   <IMX8QM_MIPI_DSI1_I2C0_SCL_LSIO_GPIO1_IO20		0x00000021>,
+			   /* Apalis CAM1_D6 */
+			   <IMX8QM_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO21		0x00000021>,
+			   /* Apalis CAM1_D5 */
+			   <IMX8QM_ESAI0_TX0_LSIO_GPIO2_IO26			0x00000021>,
+			   /* Apalis CAM1_D4 */
+			   <IMX8QM_ESAI0_TX1_LSIO_GPIO2_IO27			0x00000021>,
+			   /* Apalis CAM1_D3 */
+			   <IMX8QM_ESAI0_TX2_RX3_LSIO_GPIO2_IO28		0x00000021>,
+			   /* Apalis CAM1_D2 */
+			   <IMX8QM_ESAI0_TX3_RX2_LSIO_GPIO2_IO29		0x00000021>,
+			   /* Apalis CAM1_D1 */
+			   <IMX8QM_ESAI0_TX4_RX1_LSIO_GPIO2_IO30		0x00000021>,
+			   /* Apalis CAM1_D0 */
+			   <IMX8QM_ESAI0_TX5_RX0_LSIO_GPIO2_IO31		0x00000021>,
+			   /* Apalis CAM1_PCLK */
+			   <IMX8QM_MCLK_IN0_LSIO_GPIO3_IO00			0x00000021>,
+			   /* Apalis CAM1_MCLK */
+			   <IMX8QM_SPI3_SDO_LSIO_GPIO2_IO18			0x00000021>,
+			   /* Apalis CAM1_VSYNC */
+			   <IMX8QM_ESAI0_SCKR_LSIO_GPIO2_IO24			0x00000021>,
+			   /* Apalis CAM1_HSYNC */
+			   <IMX8QM_ESAI0_SCKT_LSIO_GPIO2_IO25			0x00000021>;
+	};
+
+	/* Apalis DAP1 */
+	pinctrl_dap1_gpios: dap1gpiosgrp {
+		fsl,pins = /* Apalis DAP1_MCLK */
+			   <IMX8QM_SPI3_SDI_LSIO_GPIO2_IO19			0x00000021>,
+			   /* Apalis DAP1_D_OUT */
+			   <IMX8QM_SAI1_RXC_LSIO_GPIO3_IO12			0x00000021>,
+			   /* Apalis DAP1_RESET */
+			   <IMX8QM_ESAI1_SCKT_LSIO_GPIO2_IO07			0x00000021>,
+			   /* Apalis DAP1_BIT_CLK */
+			   <IMX8QM_SPI0_CS1_LSIO_GPIO3_IO06			0x00000021>,
+			   /* Apalis DAP1_D_IN */
+			   <IMX8QM_SAI1_RXFS_LSIO_GPIO3_IO14			0x00000021>,
+			   /* Apalis DAP1_SYNC */
+			   <IMX8QM_SPI2_CS1_LSIO_GPIO3_IO11			0x00000021>,
+			   /* On-module Wi-Fi_I2S_EN# */
+			   <IMX8QM_ESAI1_TX5_RX0_LSIO_GPIO2_IO13		0x00000021>;
+	};
+
+	/* Apalis LCD1_G1+2 */
+	pinctrl_esai0_gpios: esai0gpiosgrp {
+		fsl,pins = /* Apalis LCD1_G1 */
+			   <IMX8QM_ESAI0_FSR_LSIO_GPIO2_IO22			0x00000021>,
+			   /* Apalis LCD1_G2 */
+			   <IMX8QM_ESAI0_FST_LSIO_GPIO2_IO23			0x00000021>;
+	};
+
+	/* On-module Gigabit Ethernet PHY Micrel KSZ9031 for Apalis GLAN */
+	pinctrl_fec1: fec1grp {
+		fsl,pins = /* Use pads in 3.3V mode */
+			   <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD			0x000014a0>,
+			   <IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020>,
+			   <IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO				0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC			0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC			0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x06000020>,
+			   <IMX8QM_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M	0x06000020>,
+			   /* On-module ETH_RESET# */
+			   <IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11				0x06000020>,
+			   /* On-module ETH_INT# */
+			   <IMX8QM_MIPI_CSI1_MCLK_OUT_LSIO_GPIO1_IO29			0x04000060>;
+	};
+
+	pinctrl_fec1_sleep: fec1-sleepgrp {
+		fsl,pins = <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD		0x000014a0>,
+			   <IMX8QM_ENET0_MDC_LSIO_GPIO4_IO14			0x04000040>,
+			   <IMX8QM_ENET0_MDIO_LSIO_GPIO4_IO13			0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TX_CTL_LSIO_GPIO5_IO31		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXC_LSIO_GPIO5_IO30		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXD0_LSIO_GPIO6_IO00		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXD1_LSIO_GPIO6_IO01		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXD2_LSIO_GPIO6_IO02		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXD3_LSIO_GPIO6_IO03		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXC_LSIO_GPIO6_IO04		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RX_CTL_LSIO_GPIO6_IO05		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXD0_LSIO_GPIO6_IO06		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXD1_LSIO_GPIO6_IO07		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXD2_LSIO_GPIO6_IO08		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXD3_LSIO_GPIO6_IO09		0x04000040>,
+			   <IMX8QM_ENET0_REFCLK_125M_25M_LSIO_GPIO4_IO15	0x04000040>,
+			   <IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11			0x06000020>,
+			   <IMX8QM_MIPI_CSI1_MCLK_OUT_LSIO_GPIO1_IO29		0x04000040>;
+	};
+
+	/* Apalis LCD1_ */
+	pinctrl_fec2_gpios: fec2gpiosgrp {
+		fsl,pins = <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD		0x000014a0>,
+			   /* Apalis LCD1_R1 */
+			   <IMX8QM_ENET1_MDC_LSIO_GPIO4_IO18			0x00000021>,
+			   /* Apalis LCD1_R0 */
+			   <IMX8QM_ENET1_MDIO_LSIO_GPIO4_IO17			0x00000021>,
+			   /* Apalis LCD1_G0 */
+			   <IMX8QM_ENET1_REFCLK_125M_25M_LSIO_GPIO4_IO16	0x00000021>,
+			   /* Apalis LCD1_R7 */
+			   <IMX8QM_ENET1_RGMII_RX_CTL_LSIO_GPIO6_IO17		0x00000021>,
+			   /* Apalis LCD1_DE */
+			   <IMX8QM_ENET1_RGMII_RXD0_LSIO_GPIO6_IO18		0x00000021>,
+			   /* Apalis LCD1_HSYNC */
+			   <IMX8QM_ENET1_RGMII_RXD1_LSIO_GPIO6_IO19		0x00000021>,
+			   /* Apalis LCD1_VSYNC */
+			   <IMX8QM_ENET1_RGMII_RXD2_LSIO_GPIO6_IO20		0x00000021>,
+			   /* Apalis LCD1_PCLK */
+			   <IMX8QM_ENET1_RGMII_RXD3_LSIO_GPIO6_IO21		0x00000021>,
+			   /* Apalis LCD1_R6 */
+			   <IMX8QM_ENET1_RGMII_TX_CTL_LSIO_GPIO6_IO11		0x00000021>,
+			   /* Apalis LCD1_R5 */
+			   <IMX8QM_ENET1_RGMII_TXC_LSIO_GPIO6_IO10		0x00000021>,
+			   /* Apalis LCD1_R4 */
+			   <IMX8QM_ENET1_RGMII_TXD0_LSIO_GPIO6_IO12		0x00000021>,
+			   /* Apalis LCD1_R3 */
+			   <IMX8QM_ENET1_RGMII_TXD1_LSIO_GPIO6_IO13		0x00000021>,
+			   /* Apalis LCD1_R2 */
+			   <IMX8QM_ENET1_RGMII_TXD2_LSIO_GPIO6_IO14		0x00000021>;
+	};
+
+	/* Apalis CAN1 */
+	pinctrl_flexcan1: flexcan0grp {
+		fsl,pins = <IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX			0x00000021>,
+			   <IMX8QM_FLEXCAN0_RX_DMA_FLEXCAN0_RX			0x00000021>;
+	};
+
+	/* Apalis CAN2 */
+	pinctrl_flexcan2: flexcan1grp {
+		fsl,pins = <IMX8QM_FLEXCAN1_TX_DMA_FLEXCAN1_TX			0x00000021>,
+			   <IMX8QM_FLEXCAN1_RX_DMA_FLEXCAN1_RX			0x00000021>;
+	};
+
+	/* Apalis CAN3 (optional) */
+	pinctrl_flexcan3: flexcan2grp {
+		fsl,pins = <IMX8QM_FLEXCAN2_TX_DMA_FLEXCAN2_TX			0x00000021>,
+			   <IMX8QM_FLEXCAN2_RX_DMA_FLEXCAN2_RX			0x00000021>;
+	};
+
+	/* Apalis GPIO1 */
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <IMX8QM_M40_GPIO0_00_LSIO_GPIO0_IO08			0x06000021>;
+	};
+
+	/* Apalis GPIO2 */
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <IMX8QM_M40_GPIO0_01_LSIO_GPIO0_IO09			0x06000021>;
+	};
+
+	/* Apalis GPIO3 */
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <IMX8QM_M41_GPIO0_00_LSIO_GPIO0_IO12			0x06000021>;
+	};
+
+	/* Apalis GPIO4 */
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <IMX8QM_M41_GPIO0_01_LSIO_GPIO0_IO13			0x06000021>;
+	};
+
+	/* Apalis GPIO5 */
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <IMX8QM_FLEXCAN2_RX_LSIO_GPIO4_IO01			0x06000021>;
+	};
+
+	/* Apalis GPIO6 */
+	pinctrl_gpio6: gpio6grp {
+		fsl,pins = <IMX8QM_FLEXCAN2_TX_LSIO_GPIO4_IO02			0x00000021>;
+	};
+
+	/* Apalis GPIO7 */
+	pinctrl_gpio7: gpio7grp {
+		fsl,pins = <IMX8QM_MLB_SIG_LSIO_GPIO3_IO26			0x00000021>;
+	};
+
+	/* Apalis GPIO8 */
+	pinctrl_gpio8: gpio8grp {
+		fsl,pins = <IMX8QM_MLB_DATA_LSIO_GPIO3_IO28			0x00000021>;
+	};
+
+	/* Apalis BKL1_ON */
+	pinctrl_gpio_bkl_on: gpiobklongrp {
+		fsl,pins = <IMX8QM_LVDS0_GPIO00_LSIO_GPIO1_IO04			0x00000021>;
+	};
+
+	/* Apalis WAKE1_MICO */
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <IMX8QM_SPI3_CS0_LSIO_GPIO2_IO20			0x06700021>;
+	};
+
+	/* Apalis USBH_OC# */
+	pinctrl_gpio_usbh_oc_n: gpiousbhocngrp {
+		fsl,pins = <IMX8QM_USB_SS3_TC3_LSIO_GPIO4_IO06			0x04000021>;
+	};
+
+	/* On-module HDMI_CTRL */
+	pinctrl_hdmi_ctrl: hdmictrlgrp {
+		fsl,pins = <IMX8QM_MIPI_CSI1_GPIO0_00_LSIO_GPIO1_IO30		0x00000061>;
+	};
+
+	/* On-module I2C */
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <IMX8QM_GPT0_CLK_DMA_I2C1_SCL			0x04000020>,
+			   <IMX8QM_GPT0_CAPTURE_DMA_I2C1_SDA			0x04000020>;
+	};
+
+	/* Apalis I2C1 */
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <IMX8QM_GPT1_CLK_DMA_I2C2_SCL			0x04000020>,
+			   <IMX8QM_GPT1_CAPTURE_DMA_I2C2_SDA			0x04000020>;
+	};
+
+	/* Apalis I2C3 (CAM) */
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <IMX8QM_SIM0_PD_DMA_I2C3_SCL				0x04000020>,
+			   <IMX8QM_SIM0_POWER_EN_DMA_I2C3_SDA			0x04000020>;
+	};
+
+	/* Apalis SPI1 */
+	pinctrl_lpspi0: lpspi0grp {
+		fsl,pins = <IMX8QM_SPI0_SCK_DMA_SPI0_SCK			0x0600004c>,
+			   <IMX8QM_SPI0_SDO_DMA_SPI0_SDO			0x0600004c>,
+			   <IMX8QM_SPI0_SDI_DMA_SPI0_SDI			0x0600004c>,
+			   <IMX8QM_SPI0_CS0_LSIO_GPIO3_IO05			0x0600004c>;
+	};
+
+	/* Apalis SPI2 */
+	pinctrl_lpspi2: lpspi2grp {
+		fsl,pins = <IMX8QM_SPI2_SCK_DMA_SPI2_SCK			0x0600004c>,
+			   <IMX8QM_SPI2_SDO_DMA_SPI2_SDO			0x0600004c>,
+			   <IMX8QM_SPI2_SDI_DMA_SPI2_SDI			0x0600004c>,
+			   <IMX8QM_SPI2_CS0_LSIO_GPIO3_IO10			0x0600004c>;
+	};
+
+	/* Apalis UART3 */
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <IMX8QM_UART0_RX_DMA_UART0_RX			0x06000020>,
+			   <IMX8QM_UART0_TX_DMA_UART0_TX			0x06000020>;
+	};
+
+	/* Apalis UART1 */
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <IMX8QM_UART1_RX_DMA_UART1_RX			0x06000020>,
+			   <IMX8QM_UART1_TX_DMA_UART1_TX			0x06000020>,
+			   <IMX8QM_UART1_CTS_B_DMA_UART1_CTS_B			0x06000020>,
+			   <IMX8QM_UART1_RTS_B_DMA_UART1_RTS_B			0x06000020>;
+	};
+
+	/* Apalis UART1 */
+	pinctrl_lpuart1ctrl: lpuart1ctrlgrp {
+		fsl,pins = /* Apalis UART1_DTR */
+			   <IMX8QM_M40_I2C0_SCL_LSIO_GPIO0_IO06			0x00000021>,
+			   /* Apalis UART1_DSR */
+			   <IMX8QM_M40_I2C0_SDA_LSIO_GPIO0_IO07			0x00000021>,
+			   /* Apalis UART1_DCD */
+			   <IMX8QM_M41_I2C0_SCL_LSIO_GPIO0_IO10			0x00000021>,
+			   /* Apalis UART1_RI */
+			   <IMX8QM_M41_I2C0_SDA_LSIO_GPIO0_IO11			0x00000021>;
+	};
+
+	/* Apalis UART4 */
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <IMX8QM_LVDS0_I2C1_SCL_DMA_UART2_TX			0x06000020>,
+			   <IMX8QM_LVDS0_I2C1_SDA_DMA_UART2_RX			0x06000020>;
+	};
+
+	/* Apalis UART2 */
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <IMX8QM_LVDS1_I2C1_SCL_DMA_UART3_TX			0x06000020>,
+			   <IMX8QM_LVDS1_I2C1_SDA_DMA_UART3_RX			0x06000020>,
+			   <IMX8QM_ENET1_RGMII_TXD3_DMA_UART3_RTS_B		0x06000020>,
+			   <IMX8QM_ENET1_RGMII_RXC_DMA_UART3_CTS_B		0x06000020>;
+	};
+
+	/* Apalis TS_2 */
+	pinctrl_lvds0_i2c0_gpio: lvds0i2c0gpiogrp {
+		fsl,pins = <IMX8QM_LVDS0_I2C0_SCL_LSIO_GPIO1_IO06		0x00000021>;
+	};
+
+	/* Apalis LCD1_G6+7 */
+	pinctrl_lvds1_i2c0_gpios: lvds1i2c0gpiosgrp {
+		fsl,pins = /* Apalis LCD1_G6 */
+			   <IMX8QM_LVDS1_I2C0_SCL_LSIO_GPIO1_IO12		0x00000021>,
+			   /* Apalis LCD1_G7 */
+			   <IMX8QM_LVDS1_I2C0_SDA_LSIO_GPIO1_IO13		0x00000021>;
+	};
+
+	/* Apalis TS_3 */
+	pinctrl_mipi_dsi_0_1_en: mipidsi0-1engrp {
+		fsl,pins = <IMX8QM_LVDS0_I2C0_SDA_LSIO_GPIO1_IO07		0x00000021>;
+	};
+
+	/* Apalis TS_4 */
+	pinctrl_mipi_dsi1_gpios: mipidsi1gpiosgrp {
+		fsl,pins = <IMX8QM_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO22		0x00000021>;
+	};
+
+	/* Apalis TS_1 */
+	pinctrl_mlb_gpios: mlbgpiosgrp {
+		fsl,pins = <IMX8QM_MLB_CLK_LSIO_GPIO3_IO27			0x00000021>;
+	};
+
+	/* Apalis MMC1_CD# */
+	pinctrl_mmc1_cd: mmc1cdgrp {
+		fsl,pins = <IMX8QM_ESAI1_TX1_LSIO_GPIO2_IO09			0x00000021>;
+	};
+
+	pinctrl_mmc1_cd_sleep: mmc1cdsleepgrp {
+		fsl,pins = <IMX8QM_ESAI1_TX1_LSIO_GPIO2_IO09			0x04000021>;
+	};
+
+	/* On-module PCIe_Wi-Fi */
+	pinctrl_pcieb: pciebgrp {
+		fsl,pins = <IMX8QM_PCIE_CTRL1_CLKREQ_B_LSIO_GPIO4_IO30		0x00000021>,
+			   <IMX8QM_PCIE_CTRL1_WAKE_B_LSIO_GPIO4_IO31		0x00000021>,
+			   <IMX8QM_PCIE_CTRL1_PERST_B_LSIO_GPIO5_IO00		0x00000021>;
+	};
+
+	/* On-module PCIe_CLK_EN1 */
+	pinctrl_pcie_sata_refclk: pciesatarefclkgrp {
+		fsl,pins = <IMX8QM_USDHC2_WP_LSIO_GPIO4_IO11			0x00000021>;
+	};
+
+	/* On-module PCIe_CLK_EN2 */
+	pinctrl_pcie_wifi_refclk: pciewifirefclkgrp {
+		fsl,pins = <IMX8QM_ESAI1_TX3_RX2_LSIO_GPIO2_IO11		0x00000021>;
+	};
+
+	/* Apalis PWM3 */
+	pinctrl_pwm0: pwm0grp {
+		fsl,pins = <IMX8QM_UART0_RTS_B_LSIO_PWM0_OUT			0x00000020>;
+	};
+
+	/* Apalis PWM4 */
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <IMX8QM_UART0_CTS_B_LSIO_PWM1_OUT			0x00000020>;
+	};
+
+	/* Apalis PWM1 */
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <IMX8QM_GPT1_COMPARE_LSIO_PWM2_OUT			0x00000020>;
+	};
+
+	/* Apalis PWM2 */
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <IMX8QM_GPT0_COMPARE_LSIO_PWM3_OUT			0x00000020>;
+	};
+
+	/* Apalis BKL1_PWM */
+	pinctrl_pwm_bkl: pwmbklgrp {
+		fsl,pins = <IMX8QM_LVDS1_GPIO00_LVDS1_PWM0_OUT			0x00000020>;
+	};
+
+	/* Apalis LCD1_ */
+	pinctrl_qspi1a_gpios: qspi1agpiosgrp {
+		fsl,pins = /* Apalis LCD1_B0 */
+			   <IMX8QM_QSPI1A_DATA0_LSIO_GPIO4_IO26			0x00000021>,
+			   /* Apalis LCD1_B1 */
+			   <IMX8QM_QSPI1A_DATA1_LSIO_GPIO4_IO25			0x00000021>,
+			   /* Apalis LCD1_B2 */
+			   <IMX8QM_QSPI1A_DATA2_LSIO_GPIO4_IO24			0x00000021>,
+			   /* Apalis LCD1_B3 */
+			   <IMX8QM_QSPI1A_DATA3_LSIO_GPIO4_IO23			0x00000021>,
+			   /* Apalis LCD1_B5 */
+			   <IMX8QM_QSPI1A_DQS_LSIO_GPIO4_IO22			0x00000021>,
+			   /* Apalis LCD1_B7 */
+			   <IMX8QM_QSPI1A_SCLK_LSIO_GPIO4_IO21			0x00000021>,
+			   /* Apalis LCD1_B4 */
+			   <IMX8QM_QSPI1A_SS0_B_LSIO_GPIO4_IO19			0x00000021>,
+			   /* Apalis LCD1_B6 */
+			   <IMX8QM_QSPI1A_SS1_B_LSIO_GPIO4_IO20			0x00000021>;
+	};
+
+	/* On-module RESET_MOCI#_DRV */
+	pinctrl_reset_moci: resetmocigrp {
+		fsl,pins = <IMX8QM_SCU_GPIO0_02_LSIO_GPIO0_IO30			0x00000021>;
+	};
+
+	/* On-module I2S SGTL5000 for Apalis Analogue Audio */
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <IMX8QM_SAI1_TXD_AUD_SAI1_TXD			0xc600006c>,
+			   <IMX8QM_SAI1_RXD_AUD_SAI1_RXD			0xc600004c>,
+			   <IMX8QM_SAI1_TXC_AUD_SAI1_TXC			0xc600004c>,
+			   <IMX8QM_SAI1_TXFS_AUD_SAI1_TXFS			0xc600004c>;
+	};
+
+	/* Apalis SATA1_ACT# */
+	pinctrl_sata1_act: sata1actgrp {
+		fsl,pins = <IMX8QM_ESAI1_TX0_LSIO_GPIO2_IO08			0x00000021>;
+	};
+
+	/* Apalis SD1_CD# */
+	pinctrl_sd1_cd: sd1cdgrp {
+		fsl,pins = <IMX8QM_USDHC2_CD_B_LSIO_GPIO4_IO12			0x00000021>;
+	};
+
+	/* On-module I2S SGTL5000 SYS_MCLK */
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <IMX8QM_MCLK_OUT0_AUD_ACM_MCLK_OUT0			0xc600004c>;
+	};
+
+	/* Apalis LCD1_ */
+	pinctrl_sim0_gpios: sim0gpiosgrp {
+		fsl,pins = /* Apalis LCD1_G5 */
+			   <IMX8QM_SIM0_CLK_LSIO_GPIO0_IO00			0x00000021>,
+			   /* Apalis LCD1_G3 */
+			   <IMX8QM_SIM0_GPIO0_00_LSIO_GPIO0_IO05		0x00000021>,
+			   /* Apalis TS_5 */
+			   <IMX8QM_SIM0_IO_LSIO_GPIO0_IO02			0x00000021>,
+			   /* Apalis LCD1_G4 */
+			   <IMX8QM_SIM0_RST_LSIO_GPIO0_IO01			0x00000021>;
+	};
+
+	/* Apalis SPDIF */
+	pinctrl_spdif0: spdif0grp {
+		fsl,pins = <IMX8QM_SPDIF0_TX_AUD_SPDIF0_TX			0xc6000040>,
+			   <IMX8QM_SPDIF0_RX_AUD_SPDIF0_RX			0xc6000040>;
+	};
+
+	pinctrl_touchctrl_gpios: touchctrlgpiosgrp {
+		fsl,pins = <IMX8QM_ESAI1_FSR_LSIO_GPIO2_IO04			0x00000021>,
+			   <IMX8QM_ESAI1_FST_LSIO_GPIO2_IO05			0x00000041>,
+			   <IMX8QM_SPI3_SCK_LSIO_GPIO2_IO17			0x00000021>,
+			   <IMX8QM_SPI3_CS1_LSIO_GPIO2_IO21			0x00000041>;
+	};
+
+	pinctrl_touchctrl_idle: touchctrlidlegrp {
+		fsl,pins = <IMX8QM_ADC_IN4_LSIO_GPIO3_IO22			0x00000021>,
+			   <IMX8QM_ADC_IN5_LSIO_GPIO3_IO23			0x00000021>,
+			   <IMX8QM_ADC_IN6_LSIO_GPIO3_IO24			0x00000021>,
+			   <IMX8QM_ADC_IN7_LSIO_GPIO3_IO25			0x00000021>;
+	};
+
+	/* On-module USB HSIC HUB (active) */
+	pinctrl_usb_hsic_active: usbh1activegrp {
+		fsl,pins = <IMX8QM_USB_HSIC0_DATA_CONN_USB_HSIC0_DATA		0x000000cf>,
+			   <IMX8QM_USB_HSIC0_STROBE_CONN_USB_HSIC0_STROBE	0x000000ff>;
+	};
+
+	/* On-module USB HSIC HUB (idle) */
+	pinctrl_usb_hsic_idle: usbh1idlegrp {
+		fsl,pins = <IMX8QM_USB_HSIC0_DATA_CONN_USB_HSIC0_DATA		0x000000cf>,
+			   <IMX8QM_USB_HSIC0_STROBE_CONN_USB_HSIC0_STROBE	0x000000cf>;
+	};
+
+	/* On-module USB HSIC HUB */
+	pinctrl_usb3503a: usb3503agrp {
+		fsl,pins = /* On-module HSIC_HUB_CONNECT */
+			   <IMX8QM_SCU_GPIO0_03_LSIO_GPIO0_IO31			0x00000041>,
+			   /* On-module HSIC_INT_N */
+			   <IMX8QM_SCU_GPIO0_05_LSIO_GPIO1_IO01			0x00000021>,
+			   /* On-module HSIC_RESET_N */
+			   <IMX8QM_SCU_GPIO0_06_LSIO_GPIO1_IO02			0x00000041>;
+	};
+
+	/* Apalis USBH_EN */
+	pinctrl_usbh_en: usbhengrp {
+		fsl,pins = <IMX8QM_USB_SS3_TC1_LSIO_GPIO4_IO04			0x00000021>;
+	};
+
+	/* Apalis USBO1 */
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = /* Apalis USBO1_EN */
+			   <IMX8QM_USB_SS3_TC0_CONN_USB_OTG1_PWR		0x00000021>,
+			   /* Apalis USBO1_OC# */
+			   <IMX8QM_USB_SS3_TC2_CONN_USB_OTG1_OC			0x04000021>;
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041>,
+			   <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD			0x00000021>,
+			   <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000021>,
+			   <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000021>,
+			   <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000021>,
+			   <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000021>,
+			   <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000021>,
+			   <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000021>,
+			   <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000021>,
+			   <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000021>,
+			   <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE		0x06000041>,
+			   <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x00000021>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK			0x06000040>,
+			   <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD			0x00000020>,
+			   <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000020>,
+			   <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000020>,
+			   <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000020>,
+			   <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000020>,
+			   <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000020>,
+			   <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000020>,
+			   <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000020>,
+			   <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000020>,
+			   <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE		0x06000040>,
+			   <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x00000020>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK			0x06000040>,
+			   <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD			0x00000020>,
+			   <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000020>,
+			   <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000020>,
+			   <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000020>,
+			   <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000020>,
+			   <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000020>,
+			   <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000020>,
+			   <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000020>,
+			   <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000020>,
+			   <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE		0x06000040>,
+			   <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x00000020>;
+	};
+
+	/* Apalis TS_6 */
+	pinctrl_usdhc1_gpios: usdhc1gpiosgrp {
+		fsl,pins = <IMX8QM_USDHC1_STROBE_LSIO_GPIO5_IO23		0x00000021>;
+	};
+
+	/* Apalis MMC1 */
+	pinctrl_usdhc2_4bit: usdhc2grp4bitgrp {
+		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041>,
+			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x00000021>,
+			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0		0x00000021>,
+			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1		0x00000021>,
+			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2		0x00000021>,
+			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3		0x00000021>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc2_4bit_100mhz: usdhc2-4bit100mhzgrp {
+		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x06000040>,
+			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x00000020>,
+			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0		0x00000020>,
+			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1		0x00000020>,
+			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2		0x00000020>,
+			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3		0x00000020>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc2_4bit_200mhz: usdhc2-4bit200mhzgrp {
+		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x06000040>,
+			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x00000020>,
+			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0		0x00000020>,
+			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1		0x00000020>,
+			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2		0x00000020>,
+			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3		0x00000020>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc2_8bit: usdhc2grp8bitgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4		0x00000021>,
+			   <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5		0x00000021>,
+			   <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6		0x00000021>,
+			   <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7		0x00000021>;
+	};
+
+	pinctrl_usdhc2_8bit_100mhz: usdhc2-8bit100mhzgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4		0x00000020>,
+			   <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5		0x00000020>,
+			   <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6		0x00000020>,
+			   <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7		0x00000020>;
+	};
+
+	pinctrl_usdhc2_8bit_200mhz: usdhc2-8bit200mhzgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4		0x00000020>,
+			   <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5		0x00000020>,
+			   <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6		0x00000020>,
+			   <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7		0x00000020>;
+	};
+
+	pinctrl_usdhc2_4bit_sleep: usdhc2-4bitsleepgrp {
+		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x04000061>,
+			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x04000061>,
+			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0		0x04000061>,
+			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1		0x04000061>,
+			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2		0x04000061>,
+			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3		0x04000061>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc2_8bit_sleep: usdhc2-8bitsleepgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4		0x04000061>,
+			   <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5		0x04000061>,
+			   <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6		0x04000061>,
+			   <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7		0x04000061>;
+	};
+
+	/* Apalis SD1 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK			0x06000041>,
+			   <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD			0x00000021>,
+			   <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0		0x00000021>,
+			   <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1		0x00000021>,
+			   <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2		0x00000021>,
+			   <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3		0x00000021>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK			0x06000041>,
+			   <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD			0x00000021>,
+			   <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0		0x00000021>,
+			   <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1		0x00000021>,
+			   <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2		0x00000021>,
+			   <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3		0x00000021>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK			0x06000041>,
+			   <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD			0x00000021>,
+			   <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0		0x00000021>,
+			   <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1		0x00000021>,
+			   <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2		0x00000021>,
+			   <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3		0x00000021>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT		0x00000021>;
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_wifi: wifigrp {
+		fsl,pins = /* On-module Wi-Fi_SUSCLK_32k */
+			   <IMX8QM_SCU_GPIO0_07_SCU_DSC_RTC_CLOCK_OUTPUT_32K	0x06000021>,
+			   /* On-module Wi-Fi_PCIE_W_DISABLE */
+			   <IMX8QM_MIPI_CSI0_MCLK_OUT_LSIO_GPIO1_IO24		0x06000021>;
+	};
+
+	pinctrl_wifi_pdn: wifipdngrp {
+		fsl,pins = /* On-module Wi-Fi_POWER_DOWN */
+			   <IMX8QM_MIPI_CSI0_GPIO0_01_LSIO_GPIO1_IO28		0x06000021>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
index 6c8d75ef9250..c32a6947ae9c 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -4,20 +4,405 @@
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
+#include <dt-bindings/clock/imx8-clock.h>
 #include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/dma/fsl-edma.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 
+audio_ipg_clk: clock-audio-ipg {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <120000000>;
+	clock-output-names = "audio_ipg_clk";
+};
+
+clk_ext_aud_mclk0: clock-ext-aud-mclk0 {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "ext_aud_mclk0";
+};
+
+clk_ext_aud_mclk1: clock-ext-aud-mclk1 {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "ext_aud_mclk1";
+};
+
+clk_esai0_rx_clk: clock-esai0-rx {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "esai0_rx_clk";
+};
+
+clk_esai0_rx_hf_clk: clock-esai0-rx-hf {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "esai0_rx_hf_clk";
+};
+
+clk_esai0_tx_clk: clock-esai0-tx {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "esai0_tx_clk";
+};
+
+clk_esai0_tx_hf_clk: clock-esai0-tx-hf {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "esai0_tx_hf_clk";
+};
+
+clk_spdif0_rx: clock-spdif0-rx {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "spdif0_rx";
+};
+
+clk_sai0_rx_bclk: clock-sai0-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai0_rx_bclk";
+};
+
+clk_sai0_tx_bclk: clock-sai0-tx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai0_tx_bclk";
+};
+
+clk_sai1_rx_bclk: clock-sai1-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai1_rx_bclk";
+};
+
+clk_sai1_tx_bclk: clock-sai1-tx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai1_tx_bclk";
+};
+
+clk_sai2_rx_bclk: clock-sai2-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai2_rx_bclk";
+};
+
+clk_sai3_rx_bclk: clock-sai3-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai3_rx_bclk";
+};
+
+clk_sai4_rx_bclk: clock-sai4-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai4_rx_bclk";
+};
+
 audio_subsys: bus@59000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0x59000000 0x0 0x59000000 0x1000000>;
 
-	audio_ipg_clk: clock-audio-ipg {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <120000000>;
-		clock-output-names = "audio_ipg_clk";
+	asrc0: asrc@59000000 {
+		compatible = "fsl,imx8qm-asrc";
+		reg = <0x59000000 0x10000>;
+		interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&asrc0_lpcg IMX_LPCG_CLK_0>,
+			 <&asrc0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div0_lpcg IMX_LPCG_CLK_4>,
+			 <&aud_pll_div1_lpcg IMX_LPCG_CLK_4>,
+			 <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
+			 <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "mem", "ipg",
+			      "asrck_0", "asrck_1", "asrck_2", "asrck_3",
+			      "asrck_4", "asrck_5", "asrck_6", "asrck_7",
+			      "asrck_8", "asrck_9", "asrck_a", "asrck_b",
+			      "asrck_c", "asrck_d", "asrck_e", "asrck_f",
+			      "spba";
+		dmas = <&edma0 0 0 0>,
+		       <&edma0 1 0 0>,
+		       <&edma0 2 0 0>,
+		       <&edma0 3 0 FSL_EDMA_RX>,
+		       <&edma0 4 0 FSL_EDMA_RX>,
+		       <&edma0 5 0 FSL_EDMA_RX>;
+		/* tx* is output channel of asrc, it is rx channel for eDMA */
+		dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc";
+		fsl,asrc-rate = <8000>;
+		fsl,asrc-width = <16>;
+		fsl,asrc-clk-map = <0>;
+		power-domains = <&pd IMX_SC_R_ASRC_0>;
+		status = "disabled";
+	};
+
+	esai0: esai@59010000 {
+		compatible = "fsl,imx8qm-esai", "fsl,imx6ull-esai";
+		reg = <0x59010000 0x10000>;
+		interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&esai0_lpcg IMX_LPCG_CLK_4>,
+			 <&esai0_lpcg IMX_LPCG_CLK_0>,
+			 <&esai0_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>;
+		clock-names = "core", "extal", "fsys", "spba";
+		dmas = <&edma0 6 0 FSL_EDMA_RX>, <&edma0 7 0 0>;
+		dma-names = "rx", "tx";
+		power-domains = <&pd IMX_SC_R_ESAI_0>;
+		status = "disabled";
+	};
+
+	spdif0: spdif@59020000 {
+		compatible = "fsl,imx8qm-spdif";
+		reg = <0x59020000 0x10000>;
+		interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, /* rx */
+			     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; /* tx */
+		clocks = <&spdif0_lpcg IMX_LPCG_CLK_4>,	/* core */
+			 <&clk_dummy>,			/* rxtx0 */
+			 <&spdif0_lpcg IMX_LPCG_CLK_0>,	/* rxtx1 */
+			 <&clk_dummy>,			/* rxtx2 */
+			 <&clk_dummy>,			/* rxtx3 */
+			 <&clk_dummy>,			/* rxtx4 */
+			 <&audio_ipg_clk>,		/* rxtx5 */
+			 <&clk_dummy>,			/* rxtx6 */
+			 <&clk_dummy>,			/* rxtx7 */
+			 <&clk_dummy>;			/* spba */
+		clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3", "rxtx4",
+			      "rxtx5", "rxtx6", "rxtx7", "spba";
+		dmas = <&edma0 8 0 (FSL_EDMA_MULTI_FIFO | FSL_EDMA_RX)>,
+		       <&edma0 9 0 FSL_EDMA_MULTI_FIFO>;
+		dma-names = "rx", "tx";
+		power-domains = <&pd IMX_SC_R_SPDIF_0>;
+		status = "disabled";
+	};
+
+	sai0: sai@59040000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59040000 0x10000>;
+		interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai0_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&sai0_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx", "tx";
+		dmas = <&edma0 12 0 1>, <&edma0 13 0 0>;
+		power-domains = <&pd IMX_SC_R_SAI_0>;
+		status = "disabled";
+	};
+
+	sai1: sai@59050000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59050000 0x10000>;
+		interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai1_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&sai1_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx", "tx";
+		dmas = <&edma0 14 0 1>, <&edma0 15 0 0>;
+		power-domains = <&pd IMX_SC_R_SAI_1>;
+		status = "disabled";
+	};
+
+	sai2: sai@59060000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59060000 0x10000>;
+		interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai2_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&sai2_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx";
+		dmas = <&edma0 16 0 1>;
+		power-domains = <&pd IMX_SC_R_SAI_2>;
+		status = "disabled";
+	};
+
+	sai3: sai@59070000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59070000 0x10000>;
+		interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai3_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&sai3_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx";
+		dmas = <&edma0 17 0 1>;
+		power-domains = <&pd IMX_SC_R_SAI_3>;
+		status = "disabled";
+	};
+
+	edma0: dma-controller@591f0000 {
+		compatible = "fsl,imx8qm-edma";
+		reg = <0x591f0000 0x190000>;
+		#dma-cells = <3>;
+		dma-channels = <24>;
+		dma-channel-mask = <0x5c0c00>;
+		interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 0 */
+			     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, /* 1 */
+			     <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>, /* 2 */
+			     <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>, /* 3 */
+			     <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>, /* 4 */
+			     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, /* 5 */
+			     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, /* 6 esai0 */
+			     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, /* 7 */
+			     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, /* 8 spdif0 */
+			     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, /* 9 */
+			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 10 unused */
+			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 11 unused */
+			     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, /* 12 sai0 */
+			     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, /* 13 */
+			     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, /* 14 sai1 */
+			     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, /* 15 */
+			     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, /* 16 sai2 */
+			     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* 17 sai3 */
+			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 18 unused */
+			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 19 unused */
+			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 20 unused */
+			     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>, /* 21 */
+			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 22 unused */
+			     <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>; /* 23 unused */
+		power-domains = <&pd IMX_SC_R_DMA_0_CH0>,
+				<&pd IMX_SC_R_DMA_0_CH1>,
+				<&pd IMX_SC_R_DMA_0_CH2>,
+				<&pd IMX_SC_R_DMA_0_CH3>,
+				<&pd IMX_SC_R_DMA_0_CH4>,
+				<&pd IMX_SC_R_DMA_0_CH5>,
+				<&pd IMX_SC_R_DMA_0_CH6>,
+				<&pd IMX_SC_R_DMA_0_CH7>,
+				<&pd IMX_SC_R_DMA_0_CH8>,
+				<&pd IMX_SC_R_DMA_0_CH9>,
+				<&pd IMX_SC_R_DMA_0_CH10>,
+				<&pd IMX_SC_R_DMA_0_CH11>,
+				<&pd IMX_SC_R_DMA_0_CH12>,
+				<&pd IMX_SC_R_DMA_0_CH13>,
+				<&pd IMX_SC_R_DMA_0_CH14>,
+				<&pd IMX_SC_R_DMA_0_CH15>,
+				<&pd IMX_SC_R_DMA_0_CH16>,
+				<&pd IMX_SC_R_DMA_0_CH17>,
+				<&pd IMX_SC_R_DMA_0_CH18>,
+				<&pd IMX_SC_R_DMA_0_CH19>,
+				<&pd IMX_SC_R_DMA_0_CH20>,
+				<&pd IMX_SC_R_DMA_0_CH21>,
+				<&pd IMX_SC_R_DMA_0_CH22>,
+				<&pd IMX_SC_R_DMA_0_CH23>;
+	};
+
+	asrc0_lpcg: clock-controller@59400000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59400000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "asrc0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ASRC_0>;
+	};
+
+	esai0_lpcg: clock-controller@59410000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59410000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_ESAI0_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "esai0_lpcg_extal_clk",
+				     "esai0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ESAI_0>;
+	};
+
+	spdif0_lpcg: clock-controller@59420000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59420000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SPDIF0_TX_CLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spdif0_lpcg_tx_clk",
+				     "spdif0_lpcg_gclkw";
+		power-domains = <&pd IMX_SC_R_SPDIF_0>;
+	};
+
+	sai0_lpcg: clock-controller@59440000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59440000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI0_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai0_lpcg_mclk",
+				     "sai0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_0>;
+	};
+
+	sai1_lpcg: clock-controller@59450000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59450000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI1_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai1_lpcg_mclk",
+				     "sai1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_1>;
+	};
+
+	sai2_lpcg: clock-controller@59460000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59460000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI2_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai2_lpcg_mclk",
+				     "sai2_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_2>;
+	};
+
+	sai3_lpcg: clock-controller@59470000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59470000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI3_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai3_lpcg_mclk",
+				     "sai3_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_3>;
 	};
 
 	dsp_lpcg: clock-controller@59580000 {
@@ -46,23 +431,319 @@ audio_subsys: bus@59000000 {
 	};
 
 	dsp: dsp@596e8000 {
-		compatible = "fsl,imx8qxp-dsp";
+		compatible = "fsl,imx8qxp-hifi4";
 		reg = <0x596e8000 0x88000>;
 		clocks = <&dsp_lpcg IMX_LPCG_CLK_5>,
 			 <&dsp_ram_lpcg IMX_LPCG_CLK_4>,
 			 <&dsp_lpcg IMX_LPCG_CLK_7>;
 		clock-names = "ipg", "ocram", "core";
-		power-domains = <&pd IMX_SC_R_MU_13A>,
-			<&pd IMX_SC_R_MU_13B>,
-			<&pd IMX_SC_R_DSP>,
-			<&pd IMX_SC_R_DSP_RAM>;
-		mbox-names = "txdb0", "txdb1",
-			"rxdb0", "rxdb1";
-		mboxes = <&lsio_mu13 2 0>,
-			<&lsio_mu13 2 1>,
-			<&lsio_mu13 3 0>,
-			<&lsio_mu13 3 1>;
-		memory-region = <&dsp_reserved>;
+		power-domains = <&pd IMX_SC_R_MU_13B>,
+				<&pd IMX_SC_R_MU_2A>;
+		mbox-names = "tx", "rx", "rxdb";
+		mboxes = <&lsio_mu13 0 0>,
+			 <&lsio_mu13 1 0>,
+			 <&lsio_mu13 3 0>;
+		firmware-name = "imx/dsp/hifi4.bin";
+		status = "disabled";
+	};
+
+	asrc1: asrc@59800000 {
+		compatible = "fsl,imx8qm-asrc";
+		reg = <0x59800000 0x10000>;
+		interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&asrc1_lpcg IMX_LPCG_CLK_4>,
+			 <&asrc1_lpcg IMX_LPCG_CLK_4>,
+			 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+			 <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
+			 <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "mem", "ipg",
+			      "asrck_0", "asrck_1", "asrck_2", "asrck_3",
+			      "asrck_4", "asrck_5", "asrck_6", "asrck_7",
+			      "asrck_8", "asrck_9", "asrck_a", "asrck_b",
+			      "asrck_c", "asrck_d", "asrck_e", "asrck_f",
+			      "spba";
+		dmas = <&edma1 0 0 0>,
+		       <&edma1 1 0 0>,
+		       <&edma1 2 0 0>,
+		       <&edma1 3 0 FSL_EDMA_RX>,
+		       <&edma1 4 0 FSL_EDMA_RX>,
+		       <&edma1 5 0 FSL_EDMA_RX>;
+		/* tx* is output channel of asrc, it is rx channel for eDMA */
+		dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc";
+		fsl,asrc-rate = <8000>;
+		fsl,asrc-width = <16>;
+		fsl,asrc-clk-map = <1>;
+		power-domains = <&pd IMX_SC_R_ASRC_1>;
+		status = "disabled";
+	};
+
+	sai4: sai@59820000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59820000 0x10000>;
+		interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai4_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&sai4_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dmas = <&edma1 8 0 FSL_EDMA_RX>, <&edma1 9 0 0>;
+		dma-names = "rx", "tx";
+		power-domains = <&pd IMX_SC_R_SAI_4>;
+		status = "disabled";
+	};
+
+	sai5: sai@59830000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59830000 0x10000>;
+		interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai5_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&sai5_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dmas = <&edma1 10 0 0>;
+		dma-names = "tx";
+		power-domains = <&pd IMX_SC_R_SAI_5>;
+		status = "disabled";
+	};
+
+	amix: amix@59840000 {
+		compatible = "fsl,imx8qm-audmix";
+		reg = <0x59840000 0x10000>;
+		clocks = <&amix_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_AMIX>;
+		dais = <&sai4>, <&sai5>;
 		status = "disabled";
 	};
+
+	mqs: mqs@59850000 {
+		compatible = "fsl,imx8qm-mqs";
+		reg = <0x59850000 0x10000>;
+		clocks = <&mqs0_lpcg IMX_LPCG_CLK_4>, <&mqs0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "mclk", "core";
+		power-domains = <&pd IMX_SC_R_MQS_0>;
+		status = "disabled";
+	};
+
+	edma1: dma-controller@599f0000 {
+		compatible = "fsl,imx8qm-edma";
+		reg = <0x599f0000 0xc0000>;
+		#dma-cells = <3>;
+		dma-channels = <11>;
+		dma-channel-mask = <0xc0>;
+		interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 1 */
+			     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, /* 1 */
+			     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, /* 2 */
+			     <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>, /* 3 */
+			     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>, /* 4 */
+			     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>, /* 5 */
+			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 6 unused */
+			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 7 unused */
+			     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* sai4 */
+			     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; /* sai5 */
+		power-domains = <&pd IMX_SC_R_DMA_1_CH0>,
+				<&pd IMX_SC_R_DMA_1_CH1>,
+				<&pd IMX_SC_R_DMA_1_CH2>,
+				<&pd IMX_SC_R_DMA_1_CH3>,
+				<&pd IMX_SC_R_DMA_1_CH4>,
+				<&pd IMX_SC_R_DMA_1_CH5>,
+				<&pd IMX_SC_R_DMA_1_CH6>,
+				<&pd IMX_SC_R_DMA_1_CH7>,
+				<&pd IMX_SC_R_DMA_1_CH8>,
+				<&pd IMX_SC_R_DMA_1_CH9>,
+				<&pd IMX_SC_R_DMA_1_CH10>;
+	};
+
+	aud_rec0_lpcg: clock-controller@59d00000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d00000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "aud_rec_clk0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_AUDIO_PLL_0>;
+	};
+
+	aud_rec1_lpcg: clock-controller@59d10000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d10000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "aud_rec_clk1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_AUDIO_PLL_1>;
+	};
+
+	aud_pll_div0_lpcg: clock-controller@59d20000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d20000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "aud_pll_div_clk0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_AUDIO_PLL_0>;
+	};
+
+	aud_pll_div1_lpcg: clock-controller@59d30000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d30000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "aud_pll_div_clk1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_AUDIO_PLL_1>;
+	};
+
+	mclkout0_lpcg: clock-controller@59d50000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d50000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_MCLKOUT0_SEL>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mclkout0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MCLK_OUT_0>;
+	};
+
+	mclkout1_lpcg: clock-controller@59d60000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d60000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_MCLKOUT1_SEL>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mclkout1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MCLK_OUT_1>;
+	};
+
+	acm: acm@59e00000 {
+		compatible = "fsl,imx8qxp-acm";
+		reg = <0x59e00000 0x1d0000>;
+		#clock-cells = <1>;
+		power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>,
+				<&pd IMX_SC_R_AUDIO_CLK_1>,
+				<&pd IMX_SC_R_MCLK_OUT_0>,
+				<&pd IMX_SC_R_MCLK_OUT_1>,
+				<&pd IMX_SC_R_AUDIO_PLL_0>,
+				<&pd IMX_SC_R_AUDIO_PLL_1>,
+				<&pd IMX_SC_R_ASRC_0>,
+				<&pd IMX_SC_R_ASRC_1>,
+				<&pd IMX_SC_R_ESAI_0>,
+				<&pd IMX_SC_R_SAI_0>,
+				<&pd IMX_SC_R_SAI_1>,
+				<&pd IMX_SC_R_SAI_2>,
+				<&pd IMX_SC_R_SAI_3>,
+				<&pd IMX_SC_R_SAI_4>,
+				<&pd IMX_SC_R_SAI_5>,
+				<&pd IMX_SC_R_SPDIF_0>,
+				<&pd IMX_SC_R_MQS_0>;
+		clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_rec1_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_ext_aud_mclk0>,
+			 <&clk_ext_aud_mclk1>,
+			 <&clk_esai0_rx_clk>,
+			 <&clk_esai0_rx_hf_clk>,
+			 <&clk_esai0_tx_clk>,
+			 <&clk_esai0_tx_hf_clk>,
+			 <&clk_spdif0_rx>,
+			 <&clk_sai0_rx_bclk>,
+			 <&clk_sai0_tx_bclk>,
+			 <&clk_sai1_rx_bclk>,
+			 <&clk_sai1_tx_bclk>,
+			 <&clk_sai2_rx_bclk>,
+			 <&clk_sai3_rx_bclk>,
+			 <&clk_sai4_rx_bclk>;
+		clock-names = "aud_rec_clk0_lpcg_clk",
+			      "aud_rec_clk1_lpcg_clk",
+			      "aud_pll_div_clk0_lpcg_clk",
+			      "aud_pll_div_clk1_lpcg_clk",
+			      "ext_aud_mclk0",
+			      "ext_aud_mclk1",
+			      "esai0_rx_clk",
+			      "esai0_rx_hf_clk",
+			      "esai0_tx_clk",
+			      "esai0_tx_hf_clk",
+			      "spdif0_rx",
+			      "sai0_rx_bclk",
+			      "sai0_tx_bclk",
+			      "sai1_rx_bclk",
+			      "sai1_tx_bclk",
+			      "sai2_rx_bclk",
+			      "sai3_rx_bclk",
+			      "sai4_rx_bclk";
+	};
+
+	asrc1_lpcg: clock-controller@59c00000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c00000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "asrc1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ASRC_1>;
+	};
+
+	sai4_lpcg: clock-controller@59c20000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c20000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI4_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai4_lpcg_mclk",
+				     "sai4_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_4>;
+	};
+
+	sai5_lpcg: clock-controller@59c30000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c30000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai5_lpcg_mclk",
+				     "sai5_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_5>;
+	};
+
+	amix_lpcg: clock-controller@59c40000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c40000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "amix_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_AMIX>;
+	};
+
+	mqs0_lpcg: clock-controller@59c50000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c50000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_MQS_TX_CLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "mqs0_lpcg_mclk",
+				     "mqs0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MQS_0>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi
new file mode 100644
index 000000000000..92752c0c5eb5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+cm40_ipg_clk: clock-cm40-ipg {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <132000000>;
+	clock-output-names = "cm40_ipg_clk";
+};
+
+cm40_subsys: bus@34000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x34000000 0x0 0x34000000 0x4000000>;
+	interrupt-parent = <&cm40_intmux>;
+
+	cm40_lpuart: serial@37220000 {
+		compatible = "fsl,imx8qxp-lpuart";
+		reg = <0x37220000 0x1000>;
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cm40_uart_lpcg IMX_LPCG_CLK_1>, <&cm40_uart_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_M4_0_UART IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_M4_0_UART>;
+		status = "disabled";
+	};
+
+	cm40_i2c: i2c@37230000 {
+		compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x37230000 0x1000>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cm40_i2c_lpcg IMX_LPCG_CLK_0>,
+			 <&cm40_i2c_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_M4_0_I2C IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_M4_0_I2C>;
+		status = "disabled";
+	};
+
+	cm40_intmux: intmux@37400000 {
+		compatible = "fsl,imx-intmux";
+		reg = <0x37400000 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&cm40_ipg_clk>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_M4_0_INTMUX>;
+		status = "disabled";
+	};
+
+	cm40_uart_lpcg: clock-controller@37620000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x37620000 0x1000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_M4_0_UART IMX_SC_PM_CLK_PER>,
+			 <&cm40_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>;
+		clock-output-names = "cm40_lpcg_uart_clk",
+				     "cm40_lpcg_uart_ipg_clk";
+		power-domains = <&pd IMX_SC_R_M4_0_UART>;
+	};
+
+	cm40_i2c_lpcg: clock-controller@37630000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x37630000 0x1000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_M4_0_I2C IMX_SC_PM_CLK_PER>,
+			 <&cm40_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "cm40_lpcg_i2c_clk",
+				     "cm40_lpcg_i2c_ipg_clk";
+		power-domains = <&pd IMX_SC_R_M4_0_I2C>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-cm41.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-cm41.dtsi
new file mode 100644
index 000000000000..d715f2a6b037
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-cm41.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/clock/imx8-lpcg.h>
+
+cm41_ipg_clk: clock-cm41-ipg {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <132000000>;
+	clock-output-names = "cm41_ipg_clk";
+};
+
+cm41_subsys: bus@38000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x38000000 0x0 0x38000000 0x4000000>;
+	interrupt-parent = <&cm41_intmux>;
+
+	cm41_i2c: i2c@3b230000 {
+		compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x3b230000 0x1000>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cm41_i2c_lpcg IMX_LPCG_CLK_0>,
+			 <&cm41_i2c_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_M4_1_I2C IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_M4_1_I2C>;
+		status = "disabled";
+	};
+
+	cm41_intmux: intmux@3b400000 {
+		compatible = "fsl,imx-intmux";
+		reg = <0x3b400000 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&cm41_ipg_clk>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_M4_1_INTMUX>;
+		status = "disabled";
+	};
+
+	cm41_i2c_lpcg: clock-controller@3b630000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x3b630000 0x1000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_M4_1_I2C IMX_SC_PM_CLK_PER>,
+			 <&cm41_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "cm41_lpcg_i2c_clk",
+				     "cm41_lpcg_i2c_ipg_clk";
+		power-domains = <&pd IMX_SC_R_M4_1_I2C>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index 82a1c4488378..ce6ef160fd55 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -7,31 +7,67 @@
 #include <dt-bindings/clock/imx8-lpcg.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 
+conn_axi_clk: clock-conn-axi {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <333333333>;
+	clock-output-names = "conn_axi_clk";
+};
+
+conn_ahb_clk: clock-conn-ahb {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <166666666>;
+	clock-output-names = "conn_ahb_clk";
+};
+
+conn_ipg_clk: clock-conn-ipg {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <83333333>;
+	clock-output-names = "conn_ipg_clk";
+};
+
+conn_bch_clk: clock-conn-bch {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <400000000>;
+	clock-output-names = "conn_bch_clk";
+};
+
 conn_subsys: bus@5b000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0x5b000000 0x0 0x5b000000 0x1000000>;
 
-	conn_axi_clk: clock-conn-axi {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <333333333>;
-		clock-output-names = "conn_axi_clk";
+	usbotg1: usb@5b0d0000 {
+		compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", "fsl,imx27-usb";
+		reg = <0x5b0d0000 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,usbphy = <&usbphy1>;
+		fsl,usbmisc = <&usbmisc1 0>;
+		clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
+		ahb-burst-config = <0x0>;
+		tx-burst-size-dword = <0x10>;
+		rx-burst-size-dword = <0x10>;
+		power-domains = <&pd IMX_SC_R_USB_0>;
+		status = "disabled";
 	};
 
-	conn_ahb_clk: clock-conn-ahb {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <166666666>;
-		clock-output-names = "conn_ahb_clk";
+	usbmisc1: usbmisc@5b0d0200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+		reg = <0x5b0d0200 0x200>;
 	};
 
-	conn_ipg_clk: clock-conn-ipg {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <83333333>;
-		clock-output-names = "conn_ipg_clk";
+	usbphy1: usbphy@5b100000 {
+		compatible = "fsl,imx7ulp-usbphy";
+		reg = <0x5b100000 0x1000>;
+		clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
+		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
+		status = "disabled";
 	};
 
 	usdhc1: mmc@5b010000 {
@@ -40,7 +76,7 @@ conn_subsys: bus@5b000000 {
 		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
 			 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
 			 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "per", "ahb";
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_0>;
 		status = "disabled";
 	};
@@ -51,7 +87,7 @@ conn_subsys: bus@5b000000 {
 		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
 			 <&sdhc1_lpcg IMX_LPCG_CLK_5>,
 			 <&sdhc1_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "per", "ahb";
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;
 		fsl,tuning-step = <2>;
@@ -64,7 +100,7 @@ conn_subsys: bus@5b000000 {
 		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
 			 <&sdhc2_lpcg IMX_LPCG_CLK_5>,
 			 <&sdhc2_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "per", "ahb";
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_2>;
 		status = "disabled";
 	};
@@ -109,6 +145,52 @@ conn_subsys: bus@5b000000 {
 		status = "disabled";
 	};
 
+	usbotg3: usb@5b110000 {
+		compatible = "fsl,imx8qm-usb3";
+		reg = <0x5b110000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clocks = <&usb3_lpcg IMX_LPCG_CLK_1>,
+			 <&usb3_lpcg IMX_LPCG_CLK_0>,
+			 <&usb3_lpcg IMX_LPCG_CLK_7>,
+			 <&usb3_lpcg IMX_LPCG_CLK_4>,
+			 <&usb3_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "lpm", "bus", "aclk", "ipg", "core";
+		assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>;
+		assigned-clock-rates = <250000000>;
+		power-domains = <&pd IMX_SC_R_USB_2>;
+		status = "disabled";
+
+		usbotg3_cdns3: usb@5b120000 {
+			compatible = "cdns,usb3";
+			reg = <0x5b120000 0x10000>,   /* memory area for OTG/DRD registers */
+			      <0x5b130000 0x10000>,   /* memory area for HOST registers */
+			      <0x5b140000 0x10000>;   /* memory area for DEVICE registers */
+			reg-names = "otg", "xhci", "dev";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host", "peripheral", "otg", "wakeup";
+			phys = <&usb3_phy>;
+			phy-names = "cdns3,usb3-phy";
+			cdns,on-chip-buff-size = /bits/ 16 <18>;
+			status = "disabled";
+		};
+	};
+
+	usb3_phy: usb-phy@5b160000 {
+		compatible = "nxp,salvo-phy";
+		reg = <0x5b160000 0x40000>;
+		clocks = <&usb3_lpcg IMX_LPCG_CLK_6>;
+		clock-names = "salvo_phy_clk";
+		power-domains = <&pd IMX_SC_R_USB_2_PHY>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
 	/* LPCG clocks */
 	sdhc0_lpcg: clock-controller@5b200000 {
 		compatible = "fsl,imx8qxp-lpcg";
@@ -195,4 +277,98 @@ conn_subsys: bus@5b000000 {
 				     "enet1_lpcg_ipg_s_clk";
 		power-domains = <&pd IMX_SC_R_ENET_1>;
 	};
+
+	usb2_lpcg: clock-controller@5b270000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b270000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&conn_ahb_clk>, <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>;
+		clock-output-names = "usboh3_ahb_clk", "usboh3_phy_ipg_clk";
+		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
+	};
+
+	usb3_lpcg: clock-controller@5b280000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b280000 0x10000>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>;
+		clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MISC>,
+			 <&conn_ipg_clk>,
+			 <&conn_ipg_clk>,
+			 <&conn_ipg_clk>,
+			 <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>;
+		clock-output-names = "usb3_app_clk",
+				     "usb3_lpm_clk",
+				     "usb3_ipg_clk",
+				     "usb3_core_pclk",
+				     "usb3_phy_clk",
+				     "usb3_aclk";
+		power-domains = <&pd IMX_SC_R_USB_2_PHY>;
+	};
+
+	rawnand_0_lpcg: clock-controller@5b290000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b290000 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_NAND IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_NAND IMX_SC_PM_CLK_MST_BUS>,
+			 <&conn_axi_clk>,
+			 <&conn_axi_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "gpmi_bch",
+				     "gpmi_io",
+				     "gpmi_apb",
+				     "gpmi_bch_apb";
+		power-domains = <&pd IMX_SC_R_NAND>;
+	};
+
+	rawnand_4_lpcg: clock-controller@5b290004 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b290004 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&conn_axi_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "apbhdma_hclk";
+		power-domains = <&pd IMX_SC_R_NAND>;
+	};
+
+	dma_apbh: dma-controller@5b810000 {
+		compatible = "fsl,imx8qxp-dma-apbh", "fsl,imx28-dma-apbh";
+		reg = <0x5b810000 0x2000>;
+		interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		dma-channels = <4>;
+		clocks = <&rawnand_4_lpcg IMX_LPCG_CLK_0>;
+		power-domains = <&pd IMX_SC_R_NAND>;
+	};
+
+	gpmi: nand-controller@5b812000 {
+		compatible = "fsl,imx8qxp-gpmi-nand";
+		reg = <0x5b812000 0x2000>, <0x5b814000 0x2000>;
+		reg-names = "gpmi-nand", "bch";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "bch";
+		clocks = <&rawnand_0_lpcg IMX_LPCG_CLK_1>,
+			 <&rawnand_0_lpcg IMX_LPCG_CLK_4>,
+			 <&rawnand_0_lpcg IMX_LPCG_CLK_0>,
+			 <&rawnand_0_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "gpmi_io", "gpmi_apb",
+			      "gpmi_bch", "gpmi_bch_apb";
+		dmas = <&dma_apbh 0>;
+		dma-names = "rx-tx";
+		power-domains = <&pd IMX_SC_R_NAND>;
+		assigned-clocks = <&clk IMX_SC_R_NAND IMX_SC_PM_CLK_MST_BUS>;
+		assigned-clock-rates = <50000000>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
index 8b5cad4e2700..7d5183c6c5be 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
@@ -10,7 +10,7 @@ ddr_subsys: bus@5c000000 {
 	#size-cells = <1>;
 	ranges = <0x5c000000 0x0 0x5c000000 0x1000000>;
 
-	ddr-pmu@5c020000 {
+	ddr_pmu0: ddr-pmu@5c020000 {
 		compatible = "fsl,imx8-ddr-pmu";
 		reg = <0x5c020000 0x10000>;
 		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index 960a802b8b6e..575be8115e42 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -5,61 +5,250 @@
  */
 
 #include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/dma/fsl-edma.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 
+dma_ipg_clk: clock-dma-ipg {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <120000000>;
+	clock-output-names = "dma_ipg_clk";
+};
+
 dma_subsys: bus@5a000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0x5a000000 0x0 0x5a000000 0x1000000>;
 
-	dma_ipg_clk: clock-dma-ipg {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <120000000>;
-		clock-output-names = "dma_ipg_clk";
+	lpspi0: spi@5a000000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a000000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi0_lpcg IMX_LPCG_CLK_0>,
+			 <&spi0_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_0>;
+		dmas = <&edma2 1 0 0>, <&edma2 0 0 FSL_EDMA_RX>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	lpspi1: spi@5a010000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a010000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi1_lpcg IMX_LPCG_CLK_0>,
+			 <&spi1_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_1>;
+		dmas = <&edma2 3 0 0>, <&edma2 2 0 FSL_EDMA_RX>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	lpspi2: spi@5a020000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a020000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi2_lpcg IMX_LPCG_CLK_0>,
+			 <&spi2_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_2>;
+		dmas = <&edma2 5 0 0>, <&edma2 4 0 FSL_EDMA_RX>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	lpspi3: spi@5a030000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a030000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi3_lpcg IMX_LPCG_CLK_0>,
+			 <&spi3_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_3>;
+		dmas = <&edma2 7 0 0>, <&edma2 6 0 FSL_EDMA_RX>;
+		dma-names = "tx", "rx";
+		status = "disabled";
 	};
 
 	lpuart0: serial@5a060000 {
 		reg = <0x5a060000 0x1000>;
-		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
 			 <&uart0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_0>;
+		dma-names = "rx", "tx";
+		dmas = <&edma2 8 0 FSL_EDMA_RX>, <&edma2 9 0 0>;
 		status = "disabled";
 	};
 
 	lpuart1: serial@5a070000 {
 		reg = <0x5a070000 0x1000>;
-		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
 			 <&uart1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_1>;
+		dma-names = "rx", "tx";
+		dmas = <&edma2 10 0 FSL_EDMA_RX>, <&edma2 11 0 0>;
 		status = "disabled";
 	};
 
 	lpuart2: serial@5a080000 {
 		reg = <0x5a080000 0x1000>;
-		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
 			 <&uart2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_2>;
+		dma-names = "rx", "tx";
+		dmas = <&edma2 12 0 FSL_EDMA_RX>, <&edma2 13 0 0>;
 		status = "disabled";
 	};
 
 	lpuart3: serial@5a090000 {
 		reg = <0x5a090000 0x1000>;
-		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
 			 <&uart3_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_3>;
+		dma-names = "rx", "tx";
+		dmas = <&edma2 14 0 FSL_EDMA_RX>, <&edma2 15 0 0>;
 		status = "disabled";
 	};
 
+	adma_pwm: pwm@5a190000 {
+		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+		reg = <0x5a190000 0x1000>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>,
+			 <&adma_pwm_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>;
+	};
+
+	edma2: dma-controller@5a1f0000 {
+		compatible = "fsl,imx8qm-edma";
+		reg = <0x5a1f0000 0x170000>;
+		#dma-cells = <3>;
+		dma-channels = <16>;
+		interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd IMX_SC_R_DMA_2_CH0>,
+				<&pd IMX_SC_R_DMA_2_CH1>,
+				<&pd IMX_SC_R_DMA_2_CH2>,
+				<&pd IMX_SC_R_DMA_2_CH3>,
+				<&pd IMX_SC_R_DMA_2_CH4>,
+				<&pd IMX_SC_R_DMA_2_CH5>,
+				<&pd IMX_SC_R_DMA_2_CH6>,
+				<&pd IMX_SC_R_DMA_2_CH7>,
+				<&pd IMX_SC_R_DMA_2_CH8>,
+				<&pd IMX_SC_R_DMA_2_CH9>,
+				<&pd IMX_SC_R_DMA_2_CH10>,
+				<&pd IMX_SC_R_DMA_2_CH11>,
+				<&pd IMX_SC_R_DMA_2_CH12>,
+				<&pd IMX_SC_R_DMA_2_CH13>,
+				<&pd IMX_SC_R_DMA_2_CH14>,
+				<&pd IMX_SC_R_DMA_2_CH15>;
+	};
+
+	spi0_lpcg: clock-controller@5a400000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a400000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi0_lpcg_clk",
+				     "spi0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_0>;
+	};
+
+	spi1_lpcg: clock-controller@5a410000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a410000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi1_lpcg_clk",
+				     "spi1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_1>;
+	};
+
+	spi2_lpcg: clock-controller@5a420000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a420000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi2_lpcg_clk",
+				     "spi2_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_2>;
+	};
+
+	spi3_lpcg: clock-controller@5a430000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a430000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi3_lpcg_clk",
+				     "spi3_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_3>;
+	};
+
 	uart0_lpcg: clock-controller@5a460000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5a460000 0x10000>;
@@ -108,11 +297,26 @@ dma_subsys: bus@5a000000 {
 		power-domains = <&pd IMX_SC_R_UART_3>;
 	};
 
+	adma_pwm_lpcg: clock-controller@5a590000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a590000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "adma_pwm_lpcg_clk",
+				     "adma_pwm_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>;
+	};
+
 	i2c0: i2c@5a800000 {
 		reg = <0x5a800000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "per";
+		clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>,
+			 <&i2c0_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		power-domains = <&pd IMX_SC_R_I2C_0>;
@@ -121,9 +325,12 @@ dma_subsys: bus@5a000000 {
 
 	i2c1: i2c@5a810000 {
 		reg = <0x5a810000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "per";
+		clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>,
+			 <&i2c1_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		power-domains = <&pd IMX_SC_R_I2C_1>;
@@ -132,9 +339,12 @@ dma_subsys: bus@5a000000 {
 
 	i2c2: i2c@5a820000 {
 		reg = <0x5a820000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "per";
+		clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>,
+			 <&i2c2_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		power-domains = <&pd IMX_SC_R_I2C_2>;
@@ -143,15 +353,130 @@ dma_subsys: bus@5a000000 {
 
 	i2c3: i2c@5a830000 {
 		reg = <0x5a830000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "per";
+		clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>,
+			 <&i2c3_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		power-domains = <&pd IMX_SC_R_I2C_3>;
 		status = "disabled";
 	};
 
+	adc0: adc@5a880000 {
+		compatible = "nxp,imx8qxp-adc";
+		#io-channel-cells = <1>;
+		reg = <0x5a880000 0x10000>;
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&adc0_lpcg IMX_LPCG_CLK_0>,
+			 <&adc0_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_ADC_0>;
+		status = "disabled";
+	};
+
+	adc1: adc@5a890000 {
+		compatible = "nxp,imx8qxp-adc";
+		#io-channel-cells = <1>;
+		reg = <0x5a890000 0x10000>;
+		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&adc1_lpcg IMX_LPCG_CLK_0>,
+			 <&adc1_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_ADC_1>;
+		status = "disabled";
+	};
+
+	flexcan1: can@5a8d0000 {
+		compatible = "fsl,imx8qm-flexcan";
+		reg = <0x5a8d0000 0x10000>;
+		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <40000000>;
+		power-domains = <&pd IMX_SC_R_CAN_0>;
+		/* SLSlice[4] */
+		fsl,clk-source = /bits/ 8 <0>;
+		fsl,scu-index = /bits/ 8 <0>;
+		status = "disabled";
+	};
+
+	flexcan2: can@5a8e0000 {
+		compatible = "fsl,imx8qm-flexcan";
+		reg = <0x5a8e0000 0x10000>;
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		/* CAN0 clock and PD is shared among all CAN instances as
+		 * CAN1 shares CAN0's clock and to enable CAN0's clock it
+		 * has to be powered on.
+		 */
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <40000000>;
+		power-domains = <&pd IMX_SC_R_CAN_1>;
+		/* SLSlice[4] */
+		fsl,clk-source = /bits/ 8 <0>;
+		fsl,scu-index = /bits/ 8 <1>;
+		status = "disabled";
+	};
+
+	flexcan3: can@5a8f0000 {
+		compatible = "fsl,imx8qm-flexcan";
+		reg = <0x5a8f0000 0x10000>;
+		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		/* CAN0 clock and PD is shared among all CAN instances as
+		 * CAN2 shares CAN0's clock and to enable CAN0's clock it
+		 * has to be powered on.
+		 */
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <40000000>;
+		power-domains = <&pd IMX_SC_R_CAN_2>;
+		/* SLSlice[4] */
+		fsl,clk-source = /bits/ 8 <0>;
+		fsl,scu-index = /bits/ 8 <2>;
+		status = "disabled";
+	};
+
+	edma3: dma-controller@5a9f0000 {
+		compatible = "fsl,imx8qm-edma";
+		reg = <0x5a9f0000 0x90000>;
+		#dma-cells = <3>;
+		dma-channels = <8>;
+		interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
+				<&pd IMX_SC_R_DMA_3_CH1>,
+				<&pd IMX_SC_R_DMA_3_CH2>,
+				<&pd IMX_SC_R_DMA_3_CH3>,
+				<&pd IMX_SC_R_DMA_3_CH4>,
+				<&pd IMX_SC_R_DMA_3_CH5>,
+				<&pd IMX_SC_R_DMA_3_CH6>,
+				<&pd IMX_SC_R_DMA_3_CH7>;
+	};
+
 	i2c0_lpcg: clock-controller@5ac00000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5ac00000 0x10000>;
@@ -199,4 +524,41 @@ dma_subsys: bus@5a000000 {
 				     "i2c3_lpcg_ipg_clk";
 		power-domains = <&pd IMX_SC_R_I2C_3>;
 	};
+
+	adc0_lpcg: clock-controller@5ac80000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac80000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "adc0_lpcg_clk",
+				     "adc0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ADC_0>;
+	};
+
+	adc1_lpcg: clock-controller@5ac90000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac90000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "adc1_lpcg_clk",
+				     "adc1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ADC_1>;
+	};
+
+	can0_lpcg: clock-controller@5acd0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5acd0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>, <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "can0_lpcg_pe_clk",
+				     "can0_lpcg_ipg_clk",
+				     "can0_lpcg_chi_clk";
+		power-domains = <&pd IMX_SC_R_CAN_0>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-gpu0.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-gpu0.dtsi
new file mode 100644
index 000000000000..9b8a44aa63d6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-gpu0.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+gpu0_subsys: bus@53000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x53000000 0x0 0x53000000 0x1000000>;
+
+	gpu_3d0: gpu@53100000 {
+		compatible = "vivante,gc";
+		reg = <0x53100000 0x40000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_MISC>;
+		clock-names = "core", "shader";
+		assigned-clocks = <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_PER>,
+				  <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_MISC>;
+		assigned-clock-rates = <700000000>, <850000000>;
+		power-domains = <&pd IMX_SC_R_GPU_0_PID0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
new file mode 100644
index 000000000000..469de8b536b5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ *
+ * Richard Zhu <hongxing.zhu@nxp.com>
+ */
+#include <dt-bindings/phy/phy.h>
+
+hsio_axi_clk: clock-hsio-axi {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <400000000>;
+	clock-output-names = "hsio_axi_clk";
+};
+
+hsio_per_clk: clock-hsio-per {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <133333333>;
+	clock-output-names = "hsio_per_clk";
+};
+
+hsio_refa_clk: clock-hsio-refa {
+	compatible = "gpio-gate-clock";
+	clocks = <&xtal100m>;
+	#clock-cells = <0>;
+	enable-gpios = <&lsio_gpio4 27 GPIO_ACTIVE_LOW>;
+};
+
+hsio_refb_clk: clock-hsio-refb {
+	compatible = "gpio-gate-clock";
+	clocks = <&xtal100m>;
+	#clock-cells = <0>;
+	enable-gpios = <&lsio_gpio4 1 GPIO_ACTIVE_LOW>;
+};
+
+xtal100m: clock-xtal100m {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <100000000>;
+	clock-output-names = "xtal_100MHz";
+};
+
+hsio_subsys: bus@5f000000 {
+	compatible = "simple-bus";
+	ranges = <0x5f000000 0x0 0x5f000000 0x01000000>,
+		 <0x80000000 0x0 0x70000000 0x10000000>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	dma-ranges = <0x80000000 0 0x80000000 0x80000000>;
+
+	pcieb: pcie@5f010000 {
+		compatible = "fsl,imx8q-pcie";
+		reg = <0x5f010000 0x10000>,
+		      <0x8ff00000 0x80000>;
+		reg-names = "dbi", "config";
+		ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
+			 <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
+		#interrupt-cells = <1>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi", "dma";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		clocks = <&pcieb_lpcg IMX_LPCG_CLK_6>,
+			 <&pcieb_lpcg IMX_LPCG_CLK_4>,
+			 <&pcieb_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "dbi", "mstr", "slv";
+		bus-range = <0x00 0xff>;
+		device_type = "pci";
+		interrupt-map = <0 0 0 1 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		num-lanes = <1>;
+		num-viewport = <4>;
+		power-domains = <&pd IMX_SC_R_PCIE_B>;
+		fsl,max-link-speed = <3>;
+		status = "disabled";
+	};
+
+	pcieb_ep: pcie-ep@5f010000 {
+		compatible = "fsl,imx8q-pcie-ep";
+		reg = <0x5f010000 0x00010000>,
+		      <0x80000000 0x10000000>;
+		reg-names = "dbi", "addr_space";
+		num-lanes = <1>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "dma";
+		clocks = <&pcieb_lpcg IMX_LPCG_CLK_6>,
+			 <&pcieb_lpcg IMX_LPCG_CLK_4>,
+			 <&pcieb_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "dbi", "mstr", "slv";
+		power-domains = <&pd IMX_SC_R_PCIE_B>;
+		fsl,max-link-speed = <3>;
+		num-ib-windows = <6>;
+		num-ob-windows = <6>;
+		status = "disabled";
+	};
+
+	pcieb_lpcg: clock-controller@5f060000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f060000 0x10000>;
+		clocks = <&hsio_axi_clk>, <&hsio_axi_clk>, <&hsio_axi_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_6>;
+		clock-output-names = "hsio_pcieb_mstr_axi_clk",
+				     "hsio_pcieb_slv_axi_clk",
+				     "hsio_pcieb_dbi_axi_clk";
+		power-domains = <&pd IMX_SC_R_PCIE_B>;
+	};
+
+	phyx1_crr1_lpcg: clock-controller@5f0b0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f0b0000 0x10000>;
+		clocks = <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_phyx1_per_clk";
+		power-domains = <&pd IMX_SC_R_SERDES_1>;
+	};
+
+	pcieb_crr3_lpcg: clock-controller@5f0d0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f0d0000 0x10000>;
+		clocks = <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_pcieb_per_clk";
+		power-domains = <&pd IMX_SC_R_PCIE_B>;
+	};
+
+	misc_crr5_lpcg: clock-controller@5f0f0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f0f0000 0x10000>;
+		clocks = <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_misc_per_clk";
+		power-domains = <&pd IMX_SC_R_HSIO_GPIO>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
index a90654155a88..2cf0f7208350 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
@@ -3,55 +3,403 @@
  * Copyright 2019-2021 NXP
  * Zhou Guoniu <guoniu.zhou@nxp.com>
  */
+img_ipg_clk: clock-img-ipg {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <200000000>;
+	clock-output-names = "img_ipg_clk";
+};
+
+img_pxl_clk: clock-img-pxl {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <600000000>;
+	clock-output-names = "img_pxl_clk";
+};
+
 img_subsys: bus@58000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0x58000000 0x0 0x58000000 0x1000000>;
 
-	img_ipg_clk: clock-img-ipg {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <200000000>;
-		clock-output-names = "img_ipg_clk";
+	isi: isi@58100000 {
+		reg = <0x58100000 0x80000>;
+		interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma1_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma2_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma3_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma4_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma5_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma6_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma7_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "per0", "per1", "per2", "per3",
+			      "per4", "per5", "per6", "per7";
+		interrupt-parent = <&gic>;
+		power-domains = <&pd IMX_SC_R_ISI_CH0>,
+				<&pd IMX_SC_R_ISI_CH1>,
+				<&pd IMX_SC_R_ISI_CH2>,
+				<&pd IMX_SC_R_ISI_CH3>,
+				<&pd IMX_SC_R_ISI_CH4>,
+				<&pd IMX_SC_R_ISI_CH5>,
+				<&pd IMX_SC_R_ISI_CH6>,
+				<&pd IMX_SC_R_ISI_CH7>;
+		status = "disabled";
+	};
+
+	irqsteer_csi0: irqsteer@58220000 {
+		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x58220000 0x1000>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&img_ipg_clk>;
+		clock-names = "ipg";
+		interrupt-parent = <&gic>;
+		power-domains = <&pd IMX_SC_R_CSI_0>;
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+		status = "disabled";
+	};
+
+	gpio0_mipi_csi0: gpio@58222000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x58222000 0x1000>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupts = <0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&irqsteer_csi0>;
+		power-domains = <&pd IMX_SC_R_CSI_0>;
+	};
+
+	csi0_core_lpcg: clock-controller@58223018 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58223018 0x4>;
+		clocks = <&clk IMX_SC_R_CSI_0 IMX_SC_PM_CLK_PER>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "csi0_lpcg_core_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	csi0_esc_lpcg: clock-controller@5822301c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5822301c 0x4>;
+		clocks = <&clk IMX_SC_R_CSI_0 IMX_SC_PM_CLK_MISC>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "csi0_lpcg_esc_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	i2c_mipi_csi0: i2c@58226000 {
+		compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x58226000 0x1000>;
+		interrupts = <8>;
+		clocks = <&clk IMX_SC_R_CSI_0_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&img_ipg_clk>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_CSI_0_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		interrupt-parent = <&irqsteer_csi0>;
+		power-domains = <&pd IMX_SC_R_CSI_0_I2C_0>;
+		status = "disabled";
+	};
+
+	mipi_csi_0: csi@58227000 {
+		compatible = "fsl,imx8qxp-mipi-csi2";
+		reg = <0x58227000 0x1000>,
+		      <0x58221000 0x1000>;
+		clocks = <&csi0_core_lpcg IMX_LPCG_CLK_4>,
+			 <&csi0_esc_lpcg IMX_LPCG_CLK_4>,
+			 <&csi0_pxl_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "core", "esc", "ui";
+		assigned-clocks = <&csi0_core_lpcg IMX_LPCG_CLK_4>,
+				  <&csi0_esc_lpcg IMX_LPCG_CLK_4>;
+		assigned-clock-rates = <360000000>, <72000000>;
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+		resets = <&scu_reset IMX_SC_R_CSI_0>;
+		status = "disabled";
+	};
+
+	irqsteer_csi1: irqsteer@58240000 {
+		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x58240000 0x1000>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&img_ipg_clk>;
+		clock-names = "ipg";
+		interrupt-parent = <&gic>;
+		power-domains = <&pd IMX_SC_R_CSI_1>;
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+		status = "disabled";
+	};
+
+	gpio0_mipi_csi1: gpio@58242000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x58242000 0x1000>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupts = <0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&irqsteer_csi1>;
+		power-domains = <&pd IMX_SC_R_CSI_1>;
+	};
+
+	csi1_core_lpcg: clock-controller@58243018 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58243018 0x4>;
+		clocks = <&clk IMX_SC_R_CSI_1 IMX_SC_PM_CLK_PER>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "csi1_lpcg_core_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	csi1_esc_lpcg: clock-controller@5824301c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5824301c 0x4>;
+		clocks = <&clk IMX_SC_R_CSI_1 IMX_SC_PM_CLK_MISC>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "csi1_lpcg_esc_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	i2c_mipi_csi1: i2c@58246000 {
+		compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x58246000 0x1000>;
+		interrupts = <8>;
+		clocks = <&clk IMX_SC_R_CSI_1_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&img_ipg_clk>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_CSI_1_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		interrupt-parent = <&irqsteer_csi1>;
+		power-domains = <&pd IMX_SC_R_CSI_1_I2C_0>;
+		status = "disabled";
+	};
+
+	mipi_csi_1: csi@58247000 {
+		compatible = "fsl,imx8qxp-mipi-csi2";
+		reg = <0x58247000 0x1000>,
+		      <0x58241000 0x1000>;
+		clocks = <&csi1_core_lpcg IMX_LPCG_CLK_4>,
+			 <&csi1_esc_lpcg IMX_LPCG_CLK_4>,
+			 <&csi1_pxl_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "core", "esc", "ui";
+		assigned-clocks = <&csi1_core_lpcg IMX_LPCG_CLK_4>,
+				  <&csi1_esc_lpcg IMX_LPCG_CLK_4>;
+		assigned-clock-rates = <360000000>, <72000000>;
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+		resets = <&scu_reset IMX_SC_R_CSI_1>;
+		status = "disabled";
+	};
+
+	irqsteer_parallel: irqsteer@58260000 {
+		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x58260000 0x1000>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk_dummy>;
+		clock-names = "ipg";
+		interrupt-parent = <&gic>;
+		power-domains = <&pd IMX_SC_R_PI_0>;
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+		status = "disabled";
+	};
+
+	pi0_ipg_lpcg: clock-controller@58263004 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58263004 0x4>;
+		clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_PER>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "pi0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	pi0_pxl_lpcg: clock-controller@58263018 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58263018 0x4>;
+		clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_PER>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pi0_lpcg_pxl_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	pi0_misc_lpcg: clock-controller@5826301c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5826301c 0x4>;
+		clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_MISC0>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pi0_lpcg_misc_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	i2c0_parallel: i2c@58266000 {
+		compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x58266000 0x1000>;
+		interrupts = <8>;
+		clocks = <&clk IMX_SC_R_PI_0_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&img_ipg_clk>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_PI_0_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		interrupt-parent = <&irqsteer_parallel>;
+		power-domains = <&pd IMX_SC_R_PI_0_I2C_0>;
+		status = "disabled";
 	};
 
 	jpegdec: jpegdec@58400000 {
 		reg = <0x58400000 0x00050000>;
-		interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
 			 <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
-		clock-names = "per", "ipg";
 		assigned-clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
 				  <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
 		assigned-clock-rates = <200000000>, <200000000>;
 		power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
-				<&pd IMX_SC_R_MJPEG_DEC_S0>,
-				<&pd IMX_SC_R_MJPEG_DEC_S1>,
-				<&pd IMX_SC_R_MJPEG_DEC_S2>,
-				<&pd IMX_SC_R_MJPEG_DEC_S3>;
+				<&pd IMX_SC_R_MJPEG_DEC_S0>;
 	};
 
 	jpegenc: jpegenc@58450000 {
 		reg = <0x58450000 0x00050000>;
-		interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
 			 <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
-		clock-names = "per", "ipg";
 		assigned-clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
 				  <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
 		assigned-clock-rates = <200000000>, <200000000>;
 		power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
-				<&pd IMX_SC_R_MJPEG_ENC_S0>,
-				<&pd IMX_SC_R_MJPEG_ENC_S1>,
-				<&pd IMX_SC_R_MJPEG_ENC_S2>,
-				<&pd IMX_SC_R_MJPEG_ENC_S3>;
+				<&pd IMX_SC_R_MJPEG_ENC_S0>;
+	};
+
+	pdma0_lpcg: clock-controller@58500000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58500000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	pdma1_lpcg: clock-controller@58510000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58510000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH1>;
+	};
+
+	pdma2_lpcg: clock-controller@58520000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58520000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma2_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH2>;
+	};
+
+	pdma3_lpcg: clock-controller@58530000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58530000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma3_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH3>;
+	};
+
+	pdma4_lpcg: clock-controller@58540000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58540000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma4_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH4>;
+	};
+
+	pdma5_lpcg: clock-controller@58550000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58550000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma5_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH5>;
+	};
+
+	pdma6_lpcg: clock-controller@58560000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58560000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma6_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH6>;
+	};
+
+	pdma7_lpcg: clock-controller@58570000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58570000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma7_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH7>;
+	};
+
+	csi0_pxl_lpcg: clock-controller@58580000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58580000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "csi0_lpcg_pxl_clk";
+		power-domains = <&pd IMX_SC_R_CSI_0>;
+	};
+
+	csi1_pxl_lpcg: clock-controller@58590000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58590000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "csi1_lpcg_pxl_clk";
+		power-domains = <&pd IMX_SC_R_CSI_1>;
+	};
+
+	hdmi_rx_pxl_link_lpcg: clock-controller@585a0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x585a0000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "hdmi_rx_lpcg_pxl_link_clk";
+		power-domains = <&pd IMX_SC_R_HDMI_RX>;
 	};
 
 	img_jpeg_dec_lpcg: clock-controller@585d0000 {
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
index 6446e6df7a9a..764c1a08e3b1 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -7,24 +7,70 @@
 #include <dt-bindings/clock/imx8-lpcg.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 
+lsio_bus_clk: clock-lsio-bus {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <100000000>;
+	clock-output-names = "lsio_bus_clk";
+};
+
 lsio_subsys: bus@5d000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
+	ranges = <0x5d000000 0x0 0x5d000000 0x1000000>,
+		 <0x08000000 0x0 0x08000000 0x10000000>;
 
-	lsio_mem_clk: clock-lsio-mem {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <200000000>;
-		clock-output-names = "lsio_mem_clk";
+	lsio_pwm0: pwm@5d000000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d000000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm0_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm0_lpcg IMX_LPCG_CLK_1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
 	};
 
-	lsio_bus_clk: clock-lsio-bus {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-		clock-output-names = "lsio_bus_clk";
+	lsio_pwm1: pwm@5d010000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d010000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm1_lpcg IMX_LPCG_CLK_1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	lsio_pwm2: pwm@5d020000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d020000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm2_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm2_lpcg IMX_LPCG_CLK_1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	lsio_pwm3: pwm@5d030000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d030000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm3_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm3_lpcg IMX_LPCG_CLK_1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
 	};
 
 	lsio_gpio0: gpio@5d080000 {
@@ -107,6 +153,20 @@ lsio_subsys: bus@5d000000 {
 		power-domains = <&pd IMX_SC_R_GPIO_7>;
 	};
 
+	flexspi0: spi@5d120000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,imx8qxp-fspi";
+		reg = <0x5d120000 0x10000>, <0x08000000 0x10000000>;
+		reg-names = "fspi_base", "fspi_mmap";
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>;
+		clock-names = "fspi_en", "fspi";
+		power-domains = <&pd IMX_SC_R_FSPI_0>;
+		status = "disabled";
+	};
+
 	lsio_mu0: mailbox@5d1b0000 {
 		reg = <0x5d1b0000 0x10000>;
 		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi
new file mode 100644
index 000000000000..dad0dc8fb431
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-only and MIT
+
+/*
+ * Copyright 2024 NXP
+ */
+
+lvds0_subsys: bus@56240000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x56240000 0x0 0x56240000 0x10000>;
+
+	qm_lvds0_lis_lpcg: qxp_mipi1_lis_lpcg: clock-controller@56243000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56243000 0x4>;
+		#clock-cells = <1>;
+		clock-output-names = "lvds0_lis_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1>;
+	};
+
+	qm_lvds0_pwm_lpcg: qxp_mipi1_pwm_lpcg: clock-controller@5624300c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5624300c 0x4>;
+		#clock-cells = <1>;
+		clock-output-names = "lvds0_pwm_lpcg_clk",
+				     "lvds0_pwm_lpcg_ipg_clk",
+				     "lvds0_pwm_lpcg_32k_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
+	};
+
+	qm_lvds0_i2c0_lpcg: qxp_mipi1_i2c0_lpcg: clock-controller@56243010 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56243010 0x4>;
+		#clock-cells = <1>;
+		clock-output-names = "lvds0_i2c0_lpcg_clk",
+				     "lvds0_i2c0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+	};
+
+	qm_pwm_lvds0: qxp_pwm_mipi_lvds1: pwm@56244000 {
+		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+		reg = <0x56244000 0x1000>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_MIPI_1_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
+		status = "disabled";
+	};
+
+	qm_i2c0_lvds0: qxp_i2c0_mipi_lvds1: i2c@56246000 {
+		compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x56246000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <8>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_MIPI_1_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lvds1.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lvds1.dtsi
new file mode 100644
index 000000000000..12ae4f48e1e1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lvds1.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-only and MIT
+
+/*
+ * Copyright 2024 NXP
+ */
+
+lvds1_subsys: bus@57240000 {
+	compatible = "simple-bus";
+	interrupt-parent = <&irqsteer_lvds1>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x57240000 0x0 0x57240000 0x10000>;
+
+	irqsteer_lvds1: interrupt-controller@57240000 {
+		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x57240000 0x1000>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <1>;
+		clocks = <&lvds1_lis_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_LVDS_1>;
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+	};
+
+	lvds1_lis_lpcg: clock-controller@57243000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57243000 0x4>;
+		#clock-cells = <1>;
+		clocks = <&lvds_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "lvds1_lis_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_LVDS_1>;
+	};
+
+	lvds1_pwm_lpcg: clock-controller@5724300c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5724300c 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_LVDS_1_PWM_0 IMX_SC_PM_CLK_PER>,
+			 <&lvds_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "lvds1_pwm_lpcg_clk",
+				     "lvds1_pwm_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_LVDS_1_PWM_0>;
+	};
+
+	lvds1_i2c0_lpcg: clock-controller@57243010 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57243010 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&lvds_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "lvds1_i2c0_lpcg_clk",
+				     "lvds1_i2c0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>;
+	};
+
+	lvds1_i2c1_lpcg: clock-controller@57243014 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57243014 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&lvds_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "lvds1_i2c1_lpcg_clk",
+				     "lvds1_i2c1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>;
+	};
+
+	pwm_lvds1: pwm@57244000 {
+		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+		reg = <0x57244000 0x1000>;
+		clocks = <&lvds1_pwm_lpcg IMX_LPCG_CLK_4>,
+			 <&lvds1_pwm_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_LVDS_1_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		power-domains = <&pd IMX_SC_R_LVDS_1_PWM_0>;
+		status = "disabled";
+	};
+
+	i2c0_lvds1: i2c@57246000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x57246000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <8>;
+		clocks = <&lvds1_i2c0_lpcg IMX_LPCG_CLK_0>,
+			 <&lvds1_i2c0_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>;
+		status = "disabled";
+	};
+
+	i2c1_lvds1: i2c@57247000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x57247000 0x1000>;
+		interrupts = <9>;
+		clocks = <&lvds1_i2c1_lpcg IMX_LPCG_CLK_0>,
+			 <&lvds1_i2c1_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-mipi0.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-mipi0.dtsi
new file mode 100644
index 000000000000..9c5b0cbdfcbd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-mipi0.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0-only and MIT
+
+/*
+ * Copyright 2024 NXP
+ */
+
+mipi0_subsys: bus@56220000 {
+	compatible = "simple-bus";
+	interrupt-parent = <&irqsteer_mipi0>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x56220000 0x0 0x56220000 0x10000>;
+
+	irqsteer_mipi0: interrupt-controller@56220000 {
+		compatible = "fsl,imx8qxp-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x56220000 0x1000>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <1>;
+		clocks = <&mipi0_lis_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_MIPI_0>;
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+	};
+
+	mipi0_lis_lpcg: clock-controller@56223000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56223000 0x4>;
+		#clock-cells = <1>;
+		power-domains = <&pd IMX_SC_R_MIPI_0>;
+	};
+
+	mipi0_pwm_lpcg: clock-controller@5622300c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5622300c 0x4>;
+		#clock-cells = <1>;
+		power-domains = <&pd IMX_SC_R_MIPI_0_PWM_0>;
+	};
+
+	mipi0_i2c0_lpcg_ipg_clk: clock-controller@56223014 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56223014 0x4>;
+		#clock-cells = <1>;
+		clocks = <&mipi0_i2c0_lpcg_ipg_s_clk IMX_LPCG_CLK_0>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi0_i2c0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>;
+	};
+
+	mipi0_i2c0_lpcg_ipg_s_clk: clock-controller@56223018 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56223018 0x4>;
+		#clock-cells = <1>;
+		clocks = <&dsi_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi0_i2c0_lpcg_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>;
+	};
+
+	mipi0_i2c0_lpcg_clk: clock-controller@5622301c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5622301c 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_MIPI_0_I2C_0 IMX_SC_PM_CLK_MISC2>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi0_i2c0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>;
+	};
+
+	mipi0_i2c1_lpcg_ipg_clk: clock-controller@56223024 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56223024 0x4>;
+		#clock-cells = <1>;
+		clocks = <&mipi0_i2c1_lpcg_ipg_s_clk IMX_LPCG_CLK_0>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi0_i2c1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_1>;
+	};
+
+	mipi0_i2c1_lpcg_ipg_s_clk: clock-controller@56223028 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56223028 0x4>;
+		#clock-cells = <1>;
+		clocks = <&dsi_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi0_i2c1_lpcg_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_1>;
+	};
+
+	mipi0_i2c1_lpcg_clk: clock-controller@5622302c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5622302c 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_MIPI_0_I2C_1 IMX_SC_PM_CLK_MISC2>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi0_i2c1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_1>;
+	};
+
+	pwm_mipi0: pwm@56224000 {
+		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+		reg = <0x56224000 0x1000>;
+		clocks = <&mipi0_pwm_lpcg IMX_LPCG_CLK_4>,
+			 <&mipi0_pwm_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_MIPI_0_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		power-domains = <&pd IMX_SC_R_MIPI_0_PWM_0>;
+		status = "disabled";
+	};
+
+	i2c0_mipi0: i2c@56226000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x56226000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <8>;
+		clocks = <&mipi0_i2c0_lpcg_clk IMX_LPCG_CLK_0>,
+			 <&mipi0_i2c0_lpcg_ipg_clk IMX_LPCG_CLK_0>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&mipi0_i2c0_lpcg_clk IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-mipi1.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-mipi1.dtsi
new file mode 100644
index 000000000000..5b1f08e412b2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-mipi1.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-only and MIT
+
+/*
+ * Copyright 2024 NXP
+ */
+
+mipi1_subsys: bus@57220000 {
+	compatible = "simple-bus";
+	interrupt-parent = <&irqsteer_mipi1>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x57220000 0x0 0x57220000 0x10000>;
+
+	irqsteer_mipi1: interrupt-controller@57220000 {
+		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x57220000 0x1000>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <1>;
+		clocks = <&mipi1_lis_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_MIPI_1>;
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+	};
+
+	mipi1_lis_lpcg: clock-controller@57223000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57223000 0x4>;
+		#clock-cells = <1>;
+		clocks = <&dsi_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_lis_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1>;
+	};
+
+	mipi1_pwm_lpcg: clock-controller@5722300c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5722300c 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_MIPI_1_PWM_0 IMX_SC_PM_CLK_PER>,
+			 <&dsi_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "mipi1_pwm_lpcg_clk",
+				     "mipi1_pwm_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
+	};
+
+	mipi1_i2c0_lpcg_clk: clock-controller@5722301c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5722301c 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_MIPI_1_I2C_0 IMX_SC_PM_CLK_MISC2>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_i2c0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+	};
+
+	mipi1_i2c0_lpcg_ipg_clk: clock-controller@57223014 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57223014 0x4>;
+		#clock-cells = <1>;
+		clocks = <&mipi1_i2c0_lpcg_ipg_s_clk IMX_LPCG_CLK_0>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_i2c0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+	};
+
+	mipi1_i2c0_lpcg_ipg_s_clk: clock-controller@57223018 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57223018 0x4>;
+		#clock-cells = <1>;
+		clocks = <&dsi_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_i2c0_lpcg_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+	};
+
+	mipi1_i2c1_lpcg_ipg_clk: clock-controller@57223024 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57223024 0x4>;
+		#clock-cells = <1>;
+		clocks = <&mipi1_i2c1_lpcg_ipg_s_clk IMX_LPCG_CLK_0>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_i2c1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_1>;
+	};
+
+	mipi1_i2c1_lpcg_ipg_s_clk: clock-controller@57223028 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x57223028 0x4>;
+		#clock-cells = <1>;
+		clocks = <&dsi_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_i2c1_lpcg_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_1>;
+	};
+
+	mipi1_i2c1_lpcg_clk: clock-controller@5722302c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5722302c 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_MIPI_1_I2C_1 IMX_SC_PM_CLK_MISC2>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mipi1_i2c1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_1>;
+	};
+
+	pwm_mipi1: pwm@57224000 {
+		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+		reg = <0x57224000 0x1000>;
+		clocks = <&mipi1_pwm_lpcg IMX_LPCG_CLK_4>,
+			 <&mipi1_pwm_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_MIPI_1_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
+		status = "disabled";
+	};
+
+	i2c0_mipi1: i2c@57226000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x57226000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <8>;
+		interrupt-parent = <&irqsteer_mipi1>;
+		clocks = <&mipi1_i2c0_lpcg_clk IMX_LPCG_CLK_0>,
+			 <&mipi1_i2c0_lpcg_ipg_clk IMX_LPCG_CLK_0>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&mipi1_i2c0_lpcg_clk IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-security.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-security.dtsi
new file mode 100644
index 000000000000..3e04142aca5c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-security.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+security_subsys: bus@31400000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x31400000 0x0 0x31400000 0x90000>;
+
+	crypto: crypto@31400000 {
+		compatible = "fsl,imx8qm-caam", "fsl,sec-v4.0";
+		reg = <0x31400000 0x90000>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x31400000 0x90000>;
+		power-domains = <&pd IMX_SC_R_CAAM_JR2>;
+		fsl,sec-era = <9>;
+
+		sec_jr2: jr@30000 {
+			compatible = "fsl,imx8qm-job-ring", "fsl,sec-v4.0-job-ring";
+			reg = <0x30000 0x10000>;
+			interrupts = <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd IMX_SC_R_CAAM_JR2>;
+		};
+
+		sec_jr3: jr@40000 {
+			compatible = "fsl,imx8qm-job-ring", "fsl,sec-v4.0-job-ring";
+			reg = <0x40000 0x10000>;
+			interrupts = <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd IMX_SC_R_CAAM_JR3>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi
index c6540768bdb9..87211c18d65a 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi
@@ -15,7 +15,7 @@ vpu: vpu@2c000000 {
 	mu_m0: mailbox@2d000000 {
 		compatible = "fsl,imx6sx-mu";
 		reg = <0x2d000000 0x20000>;
-		interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
 		#mbox-cells = <2>;
 		power-domains = <&pd IMX_SC_R_VPU_MU_0>;
 		status = "disabled";
@@ -24,7 +24,7 @@ vpu: vpu@2c000000 {
 	mu1_m0: mailbox@2d020000 {
 		compatible = "fsl,imx6sx-mu";
 		reg = <0x2d020000 0x20000>;
-		interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
 		#mbox-cells = <2>;
 		power-domains = <&pd IMX_SC_R_VPU_MU_1>;
 		status = "disabled";
diff --git a/arch/arm64/boot/dts/freescale/imx8dx-colibri-aster.dts b/arch/arm64/boot/dts/freescale/imx8dx-colibri-aster.dts
new file mode 100644
index 000000000000..c974f5dc0283
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dx-colibri-aster.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8dx-colibri.dtsi"
+#include "imx8x-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8DX on Aster Board";
+	compatible = "toradex,colibri-imx8x-aster",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8dx";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dx-colibri-eval-v3.dts b/arch/arm64/boot/dts/freescale/imx8dx-colibri-eval-v3.dts
new file mode 100644
index 000000000000..f2bf15463ae8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dx-colibri-eval-v3.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8dx-colibri.dtsi"
+#include "imx8x-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8DX on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx8x-eval-v3",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8dx";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dx-colibri-iris-v2.dts b/arch/arm64/boot/dts/freescale/imx8dx-colibri-iris-v2.dts
new file mode 100644
index 000000000000..fd425c70cf2b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dx-colibri-iris-v2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8dx-colibri.dtsi"
+#include "imx8x-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8DX on Colibri Iris V2 Board";
+	compatible = "toradex,colibri-imx8x-iris-v2",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8dx";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dx-colibri-iris.dts b/arch/arm64/boot/dts/freescale/imx8dx-colibri-iris.dts
new file mode 100644
index 000000000000..e5e2346ce4f1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dx-colibri-iris.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8dx-colibri.dtsi"
+#include "imx8x-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8DX on Colibri Iris Board";
+	compatible = "toradex,colibri-imx8x-iris",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8dx";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dx-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8dx-colibri.dtsi
new file mode 100644
index 000000000000..4d1ad052c5b6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dx-colibri.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+#include "imx8dx.dtsi"
+#include "imx8x-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8DX Module";
+};
+
+&thermal_zones {
+	pmic-thermal {
+		cooling-maps {
+			map0 {
+				cooling-device = <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dx.dtsi b/arch/arm64/boot/dts/freescale/imx8dx.dtsi
new file mode 100644
index 000000000000..ce76efc1a041
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dx.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8dxp.dtsi"
+
+&gpu_3d0 {
+	assigned-clock-rates = <372000000>, <372000000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
new file mode 100644
index 000000000000..25a77cac6f0b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -0,0 +1,1026 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8dxl.dtsi"
+
+/ {
+	model = "Freescale i.MX8DXL EVK";
+	compatible = "fsl,imx8dxl-evk", "fsl,imx8dxl";
+
+	aliases {
+		i2c2 = &i2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart0;
+		serial1 = &lpuart1;
+		serial6 = &cm40_lpuart;
+	};
+
+	chosen {
+		stdout-path = &lpuart0;
+	};
+
+	imx8dxl-cm4 {
+		compatible = "fsl,imx8qxp-cm4";
+		clocks = <&clk_dummy>;
+		mbox-names = "tx", "rx", "rxdb";
+		mboxes = <&lsio_mu5 0 1 &lsio_mu5 1 1 &lsio_mu5 3 1>;
+		memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+				<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+		power-domains = <&pd IMX_SC_R_M4_0_PID0>, <&pd IMX_SC_R_M4_0_MU_1A>;
+		fsl,resource-id = <IMX_SC_R_M4_0_PID0>;
+		fsl,entry-address = <0x34fe0000>;
+	};
+
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * Memory reserved for optee usage. Please do not use.
+		 * This will be automatically added to dtb if OP-TEE is installed.
+		 * optee@96000000 {
+		 *     reg = <0 0x96000000 0 0x2000000>;
+		 *     no-map;
+		 * };
+		 */
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x14000000>;
+			alloc-ranges = <0 0x98000000 0 0x14000000>;
+			linux,cma-default;
+		};
+
+		vdev0vring0: memory0@90000000 {
+			reg = <0 0x90000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: memory@90008000 {
+			reg = <0 0x90008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: memory@90010000 {
+			reg = <0 0x90010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: memory@90018000 {
+			reg = <0 0x90018000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: memory-rsc-table@900ff000 {
+			reg = <0 0x900ff000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: memory-vdevbuffer@90400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90400000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	m2_uart1_sel: regulator-m2uart1sel {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "m2_uart1_sel";
+		gpio = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	mux3_en: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "mux3_en";
+		gpio = <&pca6416_2 8 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	reg_fec1_sel: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec1_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_1 11 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+		status = "disabled";
+	};
+
+	reg_fec1_io: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec1_io_supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&max7322 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		status = "disabled";
+	};
+
+	reg_can0_stby: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "can0-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_3 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can1_stby: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "can1-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_3 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "SD1_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&lsio_gpio4 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <3480>;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	mii_select: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "mii-select";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&scu_gpio 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_pcieb: regulator-pcieb {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "reg_pcieb";
+		gpio = <&pca6416_1 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_audio_5v: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	bt_sco_codec: audio-codec-bt {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai0>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+	};
+
+	sound-wm8960-1 {
+		compatible = "fsl,imx-audio-wm8960";
+		model = "wm8960-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&wm8960_1>;
+		audio-asrc = <&asrc0>;
+		audio-routing = "Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"Ext Spk", "SPK_LP",
+				"Ext Spk", "SPK_LN",
+				"Ext Spk", "SPK_RP",
+				"Ext Spk", "SPK_RN",
+				"LINPUT1", "Mic Jack",
+				"Mic Jack", "MICB";
+	};
+
+	sound-wm8960-2 {
+		compatible = "fsl,imx-audio-wm8960";
+		model = "wm8960-audio-2";
+		audio-cpu = <&sai2>;
+		audio-codec = <&wm8960_2>;
+		audio-routing = "Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"Ext Spk", "SPK_LP",
+				"Ext Spk", "SPK_LN",
+				"Ext Spk", "SPK_RP",
+				"Ext Spk", "SPK_RN",
+				"LINPUT1", "Mic Jack",
+				"Mic Jack", "MICB";
+	};
+
+	sound-wm8960-3 {
+		compatible = "fsl,imx-audio-wm8960";
+		model = "wm8960-audio-3";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8960_3>;
+		audio-routing = "Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"Ext Spk", "SPK_LP",
+				"Ext Spk", "SPK_LN",
+				"Ext Spk", "SPK_RP",
+				"Ext Spk", "SPK_RN",
+				"LINPUT1", "Mic Jack",
+				"Mic Jack", "MICB";
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&asrc0 {
+	fsl,asrc-rate = <48000>;
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	nvmem-cells = <&fec_mac1>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			eee-broken-1000t;
+			qca,disable-smarteee;
+			qca,disable-hibernation-mode;
+			reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <200000>;
+			vddio-supply = <&vddio0>;
+
+			vddio0: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+/*
+ * fec1 shares the some PINs with usdhc2.
+ * by default usdhc2 is enabled in this dts.
+ * Please disable usdhc2 to enable fec1
+ */
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-txid";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	rx-internal-delay-ps = <2000>;
+	nvmem-cells = <&fec_mac0>;
+	nvmem-cell-names = "mac-address";
+	status = "disabled";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&pca6416_1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			qca,disable-smarteee;
+			vddio-supply = <&vddio1>;
+
+			vddio1: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pca6416_1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca6416_2: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9548_1: i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			max7322: gpio@68 {
+				compatible = "maxim,max7322";
+				reg = <0x68>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			wm8960_1: audio-codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+				clock-names = "mclk";
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				wlf,shared-lrclk;
+				wlf,hp-cfg = <2 2 3>;
+				wlf,gpio-cfg = <1 3>;
+				AVDD-supply = <&reg_audio_3v3>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			wm8960_2: audio-codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+				clock-names = "mclk";
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				wlf,shared-lrclk;
+				wlf,hp-cfg = <2 2 3>;
+				wlf,gpio-cfg = <1 3>;
+				AVDD-supply = <&reg_audio_3v3>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			wm8960_3: audio-codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+				clock-names = "mclk";
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				wlf,shared-lrclk;
+				wlf,hp-cfg = <2 2 3>;
+				wlf,gpio-cfg = <1 3>;
+				AVDD-supply = <&reg_audio_3v3>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+	};
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pca6416_3: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&lsio_gpio2>;
+		interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	pca9548_2: i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+	};
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+&lsio_mu5 {
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can0_stby>;
+	status = "okay";
+};
+
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan3>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-x2-pcieb";
+	fsl,refclk-pad-mode = "output";
+	status = "okay";
+};
+
+&cm40_intmux {
+	status = "disabled";
+};
+
+&cm40_lpuart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cm40_lpuart>;
+	status = "disabled";
+};
+
+&lsio_gpio4 {
+	status = "okay";
+};
+
+&lsio_gpio5 {
+	status = "okay";
+};
+
+&pcie0 {
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	reset-gpio = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcieb>;
+	status = "okay";
+};
+
+&pcie0_ep {
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	reset-gpio = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcieb>;
+	status = "disabled";
+};
+
+&sai0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai0>;
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai0_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	status = "okay";
+};
+
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&sai2 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai2_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&sai3 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai3_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&thermal_zones {
+	pmic-thermal {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&pmic_alert0>;
+				cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&usbphy1 {
+	/* USB eye diagram tests result */
+	fsl,tx-d-cal = <114>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy2 {
+	/* USB eye diagram tests result */
+	fsl,tx-d-cal = <111>;
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	cd-gpios = <&lsio_gpio5 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&lpspi3 {
+	fsl,spi-only-use-cs1-sel;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD	0x000514a0
+			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHK_PAD	0x000014a0
+			IMX8DXL_SPI3_CS0_ADMA_ACM_MCLK_OUT1		0x0600004c
+			IMX8DXL_SNVS_TAMPER_OUT1_LSIO_GPIO2_IO05_IN	0x0600004c
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			IMX8DXL_USB_SS3_TC0_CONN_USB_OTG1_PWR		0x00000021
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			IMX8DXL_USB_SS3_TC1_CONN_USB_OTG2_PWR		0x00000021
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			IMX8DXL_ENET0_MDC_CONN_EQOS_MDC				0x06000020
+			IMX8DXL_ENET0_MDIO_CONN_EQOS_MDIO			0x06000020
+			IMX8DXL_ENET1_RGMII_RXC_CONN_EQOS_RGMII_RXC		0x06000020
+			IMX8DXL_ENET1_RGMII_RXD0_CONN_EQOS_RGMII_RXD0		0x06000020
+			IMX8DXL_ENET1_RGMII_RXD1_CONN_EQOS_RGMII_RXD1		0x06000020
+			IMX8DXL_ENET1_RGMII_RXD2_CONN_EQOS_RGMII_RXD2		0x06000020
+			IMX8DXL_ENET1_RGMII_RXD3_CONN_EQOS_RGMII_RXD3		0x06000020
+			IMX8DXL_ENET1_RGMII_RX_CTL_CONN_EQOS_RGMII_RX_CTL	0x06000020
+			IMX8DXL_ENET1_RGMII_TXC_CONN_EQOS_RGMII_TXC		0x06000020
+			IMX8DXL_ENET1_RGMII_TXD0_CONN_EQOS_RGMII_TXD0		0x06000020
+			IMX8DXL_ENET1_RGMII_TXD1_CONN_EQOS_RGMII_TXD1		0x06000020
+			IMX8DXL_ENET1_RGMII_TXD2_CONN_EQOS_RGMII_TXD2		0x06000020
+			IMX8DXL_ENET1_RGMII_TXD3_CONN_EQOS_RGMII_TXD3		0x06000020
+			IMX8DXL_ENET1_RGMII_TX_CTL_CONN_EQOS_RGMII_TX_CTL	0x06000020
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			IMX8DXL_QSPI0A_DATA0_LSIO_QSPI0A_DATA0     0x06000021
+			IMX8DXL_QSPI0A_DATA1_LSIO_QSPI0A_DATA1     0x06000021
+			IMX8DXL_QSPI0A_DATA2_LSIO_QSPI0A_DATA2     0x06000021
+			IMX8DXL_QSPI0A_DATA3_LSIO_QSPI0A_DATA3     0x06000021
+			IMX8DXL_QSPI0A_DQS_LSIO_QSPI0A_DQS         0x06000021
+			IMX8DXL_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B     0x06000021
+			IMX8DXL_QSPI0A_SCLK_LSIO_QSPI0A_SCLK       0x06000021
+			IMX8DXL_QSPI0B_SCLK_LSIO_QSPI0B_SCLK       0x06000021
+			IMX8DXL_QSPI0B_DATA0_LSIO_QSPI0B_DATA0     0x06000021
+			IMX8DXL_QSPI0B_DATA1_LSIO_QSPI0B_DATA1     0x06000021
+			IMX8DXL_QSPI0B_DATA2_LSIO_QSPI0B_DATA2     0x06000021
+			IMX8DXL_QSPI0B_DATA3_LSIO_QSPI0B_DATA3     0x06000021
+			IMX8DXL_QSPI0B_DQS_LSIO_QSPI0B_DQS         0x06000021
+			IMX8DXL_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B     0x06000021
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			IMX8DXL_UART2_TX_ADMA_FLEXCAN1_TX	0x00000021
+			IMX8DXL_UART2_RX_ADMA_FLEXCAN1_RX	0x00000021
+		>;
+	};
+
+	pinctrl_flexcan3: flexcan3grp {
+		fsl,pins = <
+			IMX8DXL_FLEXCAN2_TX_ADMA_FLEXCAN2_TX	0x00000021
+			IMX8DXL_FLEXCAN2_RX_ADMA_FLEXCAN2_RX	0x00000021
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD		0x000014a0
+			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD		0x000014a0
+			IMX8DXL_ENET0_MDC_CONN_ENET0_MDC			0x06000020
+			IMX8DXL_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
+			IMX8DXL_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC		0x00000060
+			IMX8DXL_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x00000060
+			IMX8DXL_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x00000060
+			IMX8DXL_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2		0x00000060
+			IMX8DXL_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x00000060
+			IMX8DXL_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000060
+			IMX8DXL_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC		0x00000060
+			IMX8DXL_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x00000060
+			IMX8DXL_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x00000060
+			IMX8DXL_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2		0x00000060
+			IMX8DXL_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3		0x00000060
+			IMX8DXL_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000060
+		>;
+	};
+
+	pinctrl_lpspi3: lpspi3grp {
+		fsl,pins = <
+			IMX8DXL_SPI3_SCK_ADMA_SPI3_SCK		0x6000040
+			IMX8DXL_SPI3_SDO_ADMA_SPI3_SDO		0x6000040
+			IMX8DXL_SPI3_SDI_ADMA_SPI3_SDI		0x6000040
+			IMX8DXL_SPI3_CS1_ADMA_SPI3_CS1		0x6000040
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			IMX8DXL_SPI1_SCK_ADMA_I2C2_SDA		0x06000021
+			IMX8DXL_SPI1_SDO_ADMA_I2C2_SCL		0x06000021
+		>;
+	};
+
+	pinctrl_cm40_lpuart: cm40lpuartgrp {
+		fsl,pins = <
+			IMX8DXL_ADC_IN2_M40_UART0_RX		0x06000020
+			IMX8DXL_ADC_IN3_M40_UART0_TX		0x06000020
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			IMX8DXL_SPI1_CS0_ADMA_I2C3_SDA		0x06000021
+			IMX8DXL_SPI1_SDI_ADMA_I2C3_SCL		0x06000021
+		>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <
+			IMX8DXL_UART0_RX_ADMA_UART0_RX		0x06000020
+			IMX8DXL_UART0_TX_ADMA_UART0_TX		0x06000020
+		>;
+	};
+
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <
+			IMX8DXL_UART1_TX_ADMA_UART1_TX          0x06000020
+			IMX8DXL_UART1_RX_ADMA_UART1_RX          0x06000020
+			IMX8DXL_UART1_RTS_B_ADMA_UART1_RTS_B    0x06000020
+			IMX8DXL_UART1_CTS_B_ADMA_UART1_CTS_B    0x06000020
+		>;
+	};
+
+	pinctrl_pcieb: pcieagrp {
+		fsl,pins = <
+			IMX8DXL_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00	0x06000021
+			IMX8DXL_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01	0x06000021
+			IMX8DXL_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02	0x04000021
+		>;
+	};
+
+	pinctrl_sai0: sai0grp {
+		fsl,pins = <
+			IMX8DXL_SPI0_CS0_ADMA_SAI0_RXD		0x06000060
+			IMX8DXL_SPI0_CS1_ADMA_SAI0_RXC		0x06000040
+			IMX8DXL_SPI0_SCK_ADMA_SAI0_TXC		0x06000060
+			IMX8DXL_SPI0_SDI_ADMA_SAI0_TXD		0x06000060
+			IMX8DXL_SPI0_SDO_ADMA_SAI0_TXFS		0x06000040
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			IMX8DXL_FLEXCAN0_RX_ADMA_SAI1_TXC	0x06000040
+			IMX8DXL_FLEXCAN0_TX_ADMA_SAI1_TXFS	0x06000040
+			IMX8DXL_FLEXCAN1_RX_ADMA_SAI1_TXD	0x06000060
+			IMX8DXL_FLEXCAN1_TX_ADMA_SAI1_RXD	0x06000060
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			IMX8DXL_SNVS_TAMPER_OUT3_ADMA_SAI2_RXC	0x06000040
+			IMX8DXL_SNVS_TAMPER_IN0_ADMA_SAI2_RXFS	0x06000040
+			IMX8DXL_SNVS_TAMPER_OUT4_ADMA_SAI2_RXD	0x06000060
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			IMX8DXL_SNVS_TAMPER_IN1_ADMA_SAI3_RXC	0x06000040
+			IMX8DXL_SNVS_TAMPER_IN3_ADMA_SAI3_RXFS	0x06000040
+			IMX8DXL_SNVS_TAMPER_IN2_ADMA_SAI3_RXD	0x06000060
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK	0x06000041
+			IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD	0x00000021
+			IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+			IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+			IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+			IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+			IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+			IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+			IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+			IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+			IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX8DXL_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30	0x00000040 /* RESET_B */
+			IMX8DXL_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00	0x00000021 /* WP */
+			IMX8DXL_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01	0x00000021 /* CD */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK		0x06000041
+			IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3	0x00000021
+			IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT	0x00000021
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
new file mode 100644
index 000000000000..72434529f78e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+/delete-node/ &asrc1;
+/delete-node/ &asrc1_lpcg;
+/delete-node/ &adc1;
+/delete-node/ &adc1_lpcg;
+/delete-node/ &amix;
+/delete-node/ &amix_lpcg;
+/delete-node/ &edma1;
+/delete-node/ &esai0;
+/delete-node/ &esai0_lpcg;
+/delete-node/ &sai4;
+/delete-node/ &sai4_lpcg;
+/delete-node/ &sai5;
+/delete-node/ &sai5_lpcg;
+
+&acm {
+	compatible = "fsl,imx8dxl-acm";
+	power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>,
+			<&pd IMX_SC_R_AUDIO_CLK_1>,
+			<&pd IMX_SC_R_MCLK_OUT_0>,
+			<&pd IMX_SC_R_MCLK_OUT_1>,
+			<&pd IMX_SC_R_AUDIO_PLL_0>,
+			<&pd IMX_SC_R_AUDIO_PLL_1>,
+			<&pd IMX_SC_R_ASRC_0>,
+			<&pd IMX_SC_R_SAI_0>,
+			<&pd IMX_SC_R_SAI_1>,
+			<&pd IMX_SC_R_SAI_2>,
+			<&pd IMX_SC_R_SAI_3>,
+			<&pd IMX_SC_R_SPDIF_0>,
+			<&pd IMX_SC_R_MQS_0>;
+	clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>,
+		 <&aud_rec1_lpcg IMX_LPCG_CLK_0>,
+		 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+		 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+		 <&clk_ext_aud_mclk0>,
+		 <&clk_ext_aud_mclk1>,
+		 <&clk_spdif0_rx>,
+		 <&clk_sai0_rx_bclk>,
+		 <&clk_sai0_tx_bclk>,
+		 <&clk_sai1_rx_bclk>,
+		 <&clk_sai1_tx_bclk>,
+		 <&clk_sai2_rx_bclk>,
+		 <&clk_sai3_rx_bclk>;
+	clock-names = "aud_rec_clk0_lpcg_clk",
+		      "aud_rec_clk1_lpcg_clk",
+		      "aud_pll_div_clk0_lpcg_clk",
+		      "aud_pll_div_clk1_lpcg_clk",
+		      "ext_aud_mclk0",
+		      "ext_aud_mclk1",
+		      "spdif0_rx",
+		      "sai0_rx_bclk",
+		      "sai0_tx_bclk",
+		      "sai1_rx_bclk",
+		      "sai1_tx_bclk",
+		      "sai2_rx_bclk",
+		      "sai3_rx_bclk";
+};
+
+&audio_ipg_clk {
+	clock-frequency = <160000000>;
+};
+
+&dma_ipg_clk {
+	clock-frequency = <160000000>;
+};
+
+&adc0 {
+	interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&edma0 {
+	reg = <0x591f0000 0x1a0000>;
+	#dma-cells = <3>;
+	dma-channels = <25>;
+	dma-channel-mask = <0x1c0cc0>;
+	interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, /* asrc 0 */
+		<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, /* spdif0 */
+		<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, /* sai0 */
+		<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, /* sai1 */
+		<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, /* sai2 */
+		<GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, /* sai3 */
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, /* gpt0 */
+		<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, /* gpt1 */
+		<GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, /* gpt2 */
+		<GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>; /* gpt3 */
+	power-domains = <&pd IMX_SC_R_DMA_0_CH0>,
+			<&pd IMX_SC_R_DMA_0_CH1>,
+			<&pd IMX_SC_R_DMA_0_CH2>,
+			<&pd IMX_SC_R_DMA_0_CH3>,
+			<&pd IMX_SC_R_DMA_0_CH4>,
+			<&pd IMX_SC_R_DMA_0_CH5>,
+			<&pd IMX_SC_R_DMA_0_CH6>,
+			<&pd IMX_SC_R_DMA_0_CH7>,
+			<&pd IMX_SC_R_DMA_0_CH8>,
+			<&pd IMX_SC_R_DMA_0_CH9>,
+			<&pd IMX_SC_R_DMA_0_CH10>,
+			<&pd IMX_SC_R_DMA_0_CH11>,
+			<&pd IMX_SC_R_DMA_0_CH12>,
+			<&pd IMX_SC_R_DMA_0_CH13>,
+			<&pd IMX_SC_R_DMA_0_CH14>,
+			<&pd IMX_SC_R_DMA_0_CH15>,
+			<&pd IMX_SC_R_DMA_0_CH16>,
+			<&pd IMX_SC_R_DMA_0_CH17>,
+			<&pd IMX_SC_R_DMA_0_CH18>,
+			<&pd IMX_SC_R_DMA_0_CH19>,
+			<&pd IMX_SC_R_DMA_0_CH20>,
+			<&pd IMX_SC_R_DMA_0_CH21>,
+			<&pd IMX_SC_R_DMA_0_CH22>,
+			<&pd IMX_SC_R_DMA_0_CH23>,
+			<&pd IMX_SC_R_DMA_0_CH24>;
+};
+
+&edma2 {
+	interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&edma3 {
+	interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&flexcan1 {
+	interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&flexcan2 {
+	interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&flexcan3 {
+	interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c0 {
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+	dma-names = "tx","rx";
+	dmas = <&edma3 1 0 0>, <&edma3 0 0 FSL_EDMA_RX>;
+};
+
+&i2c1 {
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+	dma-names = "tx","rx";
+	dmas = <&edma3 3 0 0>, <&edma3 2 0 FSL_EDMA_RX>;
+};
+
+&i2c2 {
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+	dma-names = "tx","rx";
+	dmas = <&edma3 5 0 0>, <&edma3 4 0 FSL_EDMA_RX>;
+};
+
+&i2c3 {
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+	dma-names = "tx","rx";
+	dmas = <&edma3 7 0 0>, <&edma3 6 0 FSL_EDMA_RX>;
+};
+
+&lpuart0 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart1 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart2 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart3 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpspi0 {
+	interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpspi1 {
+	interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpspi2 {
+	interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpspi3 {
+	interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sai0 {
+	interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sai1 {
+	interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sai2 {
+	interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sai3 {
+	interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spdif0 {
+	interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* rx */
+		     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; /* tx */
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
new file mode 100644
index 000000000000..a66ba6d0a8c0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+/delete-node/ &enet1_lpcg;
+/delete-node/ &fec2;
+/delete-node/ &usbotg3;
+/delete-node/ &usb3_phy;
+
+/ {
+	conn_enet0_root_clk: clock-conn-enet0-root {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "conn_enet0_root_clk";
+	};
+
+	clk_dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "clk_dummy";
+	};
+};
+
+&conn_subsys {
+	eqos: ethernet@5b050000 {
+		compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a";
+		reg = <0x5b050000 0x10000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		clocks = <&eqos_lpcg IMX_LPCG_CLK_4>,
+			 <&eqos_lpcg IMX_LPCG_CLK_6>,
+			 <&eqos_lpcg IMX_LPCG_CLK_0>,
+			 <&eqos_lpcg IMX_LPCG_CLK_5>,
+			 <&eqos_lpcg IMX_LPCG_CLK_2>;
+		clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
+		assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <125000000>;
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+		status = "disabled";
+	};
+
+	usbotg2: usb@5b0e0000 {
+		compatible = "fsl,imx8dxl-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+		reg = <0x5b0e0000 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,usbphy = <&usbphy2>;
+		fsl,usbmisc = <&usbmisc2 0>;
+		/*
+		 * usbotg1 and usbotg2 share one clcok.
+		 * scu firmware disables the access to the clock and keeps
+		 * it always on in case other core (M4) uses one of these.
+		 */
+		clocks = <&clk_dummy>;
+		ahb-burst-config = <0x0>;
+		tx-burst-size-dword = <0x10>;
+		rx-burst-size-dword = <0x10>;
+		power-domains = <&pd IMX_SC_R_USB_1>;
+		status = "disabled";
+	};
+
+	usbmisc2: usbmisc@5b0e0200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+		reg = <0x5b0e0200 0x200>;
+	};
+
+	usbphy2: usbphy@5b110000 {
+		compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy";
+		reg = <0x5b110000 0x1000>;
+		clocks = <&usb2_2_lpcg IMX_LPCG_CLK_7>;
+		power-domains = <&pd IMX_SC_R_USB_1_PHY>;
+		status = "disabled";
+	};
+
+	eqos_lpcg: clock-controller@5b240000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b240000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&conn_enet0_root_clk>,
+			 <&conn_axi_clk>,
+			 <&conn_axi_clk>,
+			 <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
+			 <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_2>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "eqos_ptp",
+				     "eqos_mem_clk",
+				     "eqos_aclk",
+				     "eqos_clk",
+				     "eqos_csr_clk";
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+	};
+
+	usb2_2_lpcg: clock-controller@5b280000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b280000 0x10000>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_7>;
+		clocks = <&conn_ipg_clk>;
+		clock-output-names = "usboh3_2_phy_ipg_clk";
+		power-domains = <&pd IMX_SC_R_USB_1_PHY>;
+	};
+
+};
+
+&dma_apbh {
+	interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&enet0_lpcg {
+	clocks = <&conn_enet0_root_clk>,
+		 <&conn_enet0_root_clk>,
+		 <&conn_axi_clk>,
+		 <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>,
+		 <&conn_ipg_clk>,
+		 <&conn_ipg_clk>;
+};
+
+&fec1 {
+	compatible = "fsl,imx8dxl-fec", "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+	interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+	assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
+	assigned-clock-rates = <125000000>;
+};
+
+&gpmi {
+	interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbphy1 {
+	compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy";
+};
+
+&usdhc1 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc2 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc3 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbotg1 {
+	interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+	/*
+	 * usbotg1 and usbotg2 share one clock
+	 * scfw disable clock access and keep it always on
+	 * in case other core (M4) use one of these.
+	 */
+	clocks = <&clk_dummy>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
new file mode 100644
index 000000000000..3569abb5bb9b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+&ddr_pmu0 {
+	compatible = "fsl,imx8dxl-ddr-pmu", "fsl,imx8-ddr-pmu";
+	interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
new file mode 100644
index 000000000000..ec466e4d7df5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ */
+
+&hsio_subsys {
+	phyx1_lpcg: clock-controller@5f090000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f090000 0x10000>;
+		clocks = <&hsio_refb_clk>, <&hsio_per_clk>,
+			 <&hsio_per_clk>, <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_phyx1_pclk",
+				     "hsio_phyx1_epcs_tx_clk",
+				     "hsio_phyx1_epcs_rx_clk",
+				     "hsio_phyx1_apb_clk";
+		power-domains = <&pd IMX_SC_R_SERDES_1>;
+	};
+
+	hsio_phy: phy@5f1a0000 {
+		compatible = "fsl,imx8qxp-hsio";
+		reg = <0x5f1a0000 0x10000>,
+		      <0x5f120000 0x10000>,
+		      <0x5f140000 0x10000>,
+		      <0x5f160000 0x10000>;
+		reg-names = "reg", "phy", "ctrl", "misc";
+		clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>,
+			 <&phyx1_lpcg IMX_LPCG_CLK_4>,
+			 <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>,
+			 <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>,
+			 <&misc_crr5_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "pclk0", "apb_pclk0", "phy0_crr", "ctl0_crr",
+			      "misc_crr";
+		#phy-cells = <3>;
+		power-domains = <&pd IMX_SC_R_SERDES_1>;
+		status = "disabled";
+	};
+
+	pcie0: pcie@5f010000 {
+		#interrupt-cells = <1>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		interrupt-map = <0 0 0 1 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0 0 0 0x7>;
+	};
+
+	pcie0_ep: pcie-ep@5f010000 {
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "dma";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
new file mode 100644
index 000000000000..5f4f789e4a73
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+&flexspi0 {
+	compatible = "nxp,imx8dxl-fspi";
+	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio0 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 47 13>,
+		      <&iomuxc 13 61 4>,
+		      <&iomuxc 19 67 4>,
+		      <&iomuxc 24 72 1>;
+};
+
+&lsio_gpio1 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 4 74 5>,
+		      <&iomuxc 9 80 16>;
+};
+
+&lsio_gpio2 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 1 98 2>,
+		      <&iomuxc 3 101 1>,
+		      <&iomuxc 5 107 8>;
+};
+
+&lsio_gpio3 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 115 4>,
+		      <&iomuxc 9 121 1>,
+		      <&iomuxc 10 120 1>,
+		      <&iomuxc 11 123 1>,
+		      <&iomuxc 12 122 1>,
+		      <&iomuxc 13 125 1>,
+		      <&iomuxc 14 124 1>,
+		      <&iomuxc 16 126 1>,
+		      <&iomuxc 17 128 1>,
+		      <&iomuxc 18 131 1>,
+		      <&iomuxc 19 130 1>,
+		      <&iomuxc 20 133 1>,
+		      <&iomuxc 21 132 1>,
+		      <&iomuxc 22 129 1>,
+		      <&iomuxc 23 134 1>;
+};
+
+&lsio_gpio4 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 0 3>,
+		      <&iomuxc 3 4 4>,
+		      <&iomuxc 7 9 12>,
+		      <&iomuxc 19 22 2>,
+		      <&iomuxc 21 25 2>,
+		      <&iomuxc 29 29 3>;
+};
+
+&lsio_gpio5 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 32 3>,
+		      <&iomuxc 3 36 6>,
+		      <&iomuxc 9 43 3>;
+};
+
+&lsio_gpio6 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 53 7>,
+		      <&iomuxc 8 86 10>,
+		      <&iomuxc 19 107 8>;
+};
+
+&lsio_gpio7 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 0 3>,
+		      <&iomuxc 3 4 4>,
+		      <&iomuxc 8 22 2>,
+		      <&iomuxc 10 25 2>,
+		      <&iomuxc 16 44 2>;
+};
+
+&lsio_mu0 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu1 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu2 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu3 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu4 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu5 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
new file mode 100644
index 000000000000..8d60827822ed
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+#include <dt-bindings/clock/imx8-clock.h>
+#include <dt-bindings/dma/fsl-edma.h>
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/pads-imx8dxl.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &eqos;
+		gpio0 = &lsio_gpio0;
+		gpio1 = &lsio_gpio1;
+		gpio2 = &lsio_gpio2;
+		gpio3 = &lsio_gpio3;
+		gpio4 = &lsio_gpio4;
+		gpio5 = &lsio_gpio5;
+		gpio6 = &lsio_gpio6;
+		gpio7 = &lsio_gpio7;
+		mu1 = &lsio_mu1;
+		spi0 = &lpspi0;
+		spi1 = &lpspi1;
+		spi2 = &lpspi2;
+		spi3 = &lpspi3;
+	};
+
+	cpus: cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		/* We have 1 clusters with 2 Cortex-A35 cores */
+		A35_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&a35_opp_table>;
+		};
+
+		A35_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&a35_opp_table>;
+		};
+
+		A35_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	a35_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	gic: interrupt-controller@51a00000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#address-cells = <0>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_reserved: dsp@92400000 {
+			reg = <0 0x92400000 0 0x2000000>;
+			no-map;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	system-controller {
+		compatible = "fsl,imx-scu";
+		mbox-names = "tx0",
+			     "rx0",
+			     "gip3";
+		mboxes = <&lsio_mu1 0 0
+			  &lsio_mu1 1 0
+			  &lsio_mu1 3 3>;
+
+		pd: power-controller {
+			compatible = "fsl,imx8dl-scu-pd", "fsl,scu-pd";
+			#power-domain-cells = <1>;
+		};
+
+		clk: clock-controller {
+			compatible = "fsl,imx8dxl-clk", "fsl,scu-clk";
+			#clock-cells = <2>;
+		};
+
+		scu_gpio: gpio {
+			compatible = "fsl,imx8qxp-sc-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		iomuxc: pinctrl {
+			compatible = "fsl,imx8dxl-iomuxc";
+		};
+
+		ocotp: ocotp {
+			compatible = "fsl,imx8qxp-scu-ocotp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			fec_mac0: mac@2c4 {
+				reg = <0x2c4 6>;
+			};
+
+			fec_mac1: mac@2c6 {
+				reg = <0x2c6 6>;
+			};
+		};
+
+		rtc: rtc {
+			compatible = "fsl,imx8qxp-sc-rtc";
+		};
+
+		sc_pwrkey: keys {
+			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		watchdog {
+			compatible = "fsl,imx8dxl-sc-wdt", "fsl,imx-sc-wdt";
+			timeout-sec = <60>;
+		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx8dxl-sc-thermal", "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+	};
+
+	thermal_zones: thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	/* The two values below cannot be changed by the board */
+	xtal32k: clock-xtal32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32KHz";
+	};
+
+	xtal24m: clock-xtal24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal_24MHz";
+	};
+
+	/* sorted in register address */
+	#include "imx8-ss-cm40.dtsi"
+	#include "imx8-ss-adma.dtsi"
+	#include "imx8-ss-conn.dtsi"
+	#include "imx8-ss-ddr.dtsi"
+	#include "imx8-ss-lsio.dtsi"
+	#include "imx8-ss-hsio.dtsi"
+};
+
+#include "imx8dxl-ss-adma.dtsi"
+#include "imx8dxl-ss-conn.dtsi"
+#include "imx8dxl-ss-lsio.dtsi"
+#include "imx8dxl-ss-ddr.dtsi"
+#include "imx8dxl-ss-hsio.dtsi"
+
+&cm40_intmux {
+	interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp-mba8xx.dts b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp-mba8xx.dts
new file mode 100644
index 000000000000..f35514b7b338
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp-mba8xx.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include "imx8dxp-tqma8xdp.dtsi"
+#include "mba8xx.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8DXP TQMa8XDP on MBa8Xx";
+	compatible = "tq,imx8dxp-tqma8xdp-mba8xx", "tq,imx8dxp-tqma8xdp", "fsl,imx8dxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp.dtsi b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp.dtsi
new file mode 100644
index 000000000000..e2de8517aa0e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "imx8dxp.dtsi"
+#include "tqma8xx.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8DXP TQMa8XDP";
+	compatible = "tq,imx8dxp-tqma8xdp", "fsl,imx8dxp";
+};
+
+&pmic_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device =
+				<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps-mb-smarc-2.dts b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps-mb-smarc-2.dts
new file mode 100644
index 000000000000..331787df2fe4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps-mb-smarc-2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2021-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include "imx8dxp-tqma8xdps.dtsi"
+#include "tqma8xxs-mb-smarc-2.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8DXP TQMa8XDPS on MB-SMARC-2";
+	compatible = "tq,imx8dxp-tqma8xdps-mb-smarc-2", "tq,imx8dxp-tqma8xdps", "fsl,imx8dxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps.dtsi b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps.dtsi
new file mode 100644
index 000000000000..a97286fe7e0d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2021-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "imx8dxp.dtsi"
+#include "tqma8xxs.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8DXP TQMa8XDPS";
+	compatible = "tq,imx8dxp-tqma8xdps", "fsl,imx8dxp";
+};
+
+&pmic0_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device =
+				<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxp.dtsi b/arch/arm64/boot/dts/freescale/imx8dxp.dtsi
new file mode 100644
index 000000000000..a8f7352332c0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxp.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8qxp.dtsi"
+
+/delete-node/ &A35_2;
+/delete-node/ &A35_3;
+
+&thermal_zones {
+	cpu0-thermal {
+		cooling-maps {
+			map0 {
+				cooling-device =
+				<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index 03266bd90a06..ea1d5b9c6bae 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -6,6 +6,13 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+
+	dmic_codec: dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <1>;
+		#sound-dai-cells = <0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -49,6 +56,20 @@
 		enable-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
 	};
 
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	reg_audio: regulator-audio {
 		compatible = "regulator-fixed";
 		regulator-name = "3v3_aud";
@@ -98,18 +119,46 @@
 		enable-active-high;
 	};
 
-	sound {
-		compatible = "fsl,imx-audio-wm8962";
-		model = "wm8962-audio";
-		audio-cpu = <&sai3>;
-		audio-codec = <&wm8962>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC";
+	sound-dmic {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "dmic";
+		simple-audio-card,format = "pdm";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+
+		dailink_master: simple-audio-card,cpu {
+			sound-dai = <&micfil>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&dmic_codec>;
+		};
+	};
+
+	sound-wm8962 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8962";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets = "Headphone", "Headphones",
+					    "Microphone", "Headset Mic",
+					    "Speaker", "Speaker";
+		simple-audio-card,routing = "Headphones", "HPOUTL",
+					    "Headphones", "HPOUTR",
+					    "Speaker", "SPKOUTL",
+					    "Speaker", "SPKOUTR",
+					    "Headset Mic", "MICBIAS",
+					    "IN3R", "Headset Mic";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8962>;
+			clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+			frame-master;
+			bitclock-master;
+		};
 	};
 };
 
@@ -120,7 +169,7 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_espi2>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	eeprom@0 {
@@ -141,17 +190,19 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	camera@3c {
+	camera@10 {
 		compatible = "ovti,ov5640";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x3c>;
+		reg = <0x10>;
 		clocks = <&clk IMX8MM_CLK_CLKO1>;
 		clock-names = "xclk";
 		assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;
 		assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
 		assigned-clock-rates = <24000000>;
 		AVDD-supply = <&reg_camera>;  /* 2.8v */
+		DVDD-supply = <&reg_1v5>;
+		DOVDD-supply = <&reg_1v8>;
 		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 
@@ -192,6 +243,7 @@
 			0x0000 /* 4:FN_DMICCDAT */
 			0x0000 /* 5:Default */
 		>;
+		#sound-dai-cells = <0>;
 	};
 
 	pca6416_0: gpio@20 {
@@ -215,6 +267,15 @@
 	};
 };
 
+&micfil {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX8MM_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <49152000>;
+	status = "okay";
+};
+
 &mipi_csi {
 	status = "okay";
 	ports {
@@ -241,9 +302,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
-		 <&pcie0_refclk_gated>;
-	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk_gated>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
 	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
 			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
 	assigned-clock-rates = <10000000>, <250000000>;
@@ -290,7 +350,6 @@
 };
 
 &usbotg2 {
-	pinctrl-names = "default";
 	disable-over-current;
 	dr_mode = "host";
 	status = "okay";
@@ -316,7 +375,7 @@
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
 			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
-			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x41
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13              0x41
 		>;
 	};
 
@@ -354,6 +413,13 @@
 		>;
 	};
 
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_PDM_CLK	0xd6
+			MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0	0xd6
+		>;
+	};
+
 	pinctrl_reg_usb_otg1: usbotg1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29     0x19
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
index 74a7b0cc10c2..734a75198f06 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
@@ -16,4 +16,136 @@
 	chosen {
 		stdout-path = &uart2;
 	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
+	reg_hdmi: regulator-hdmi-dvdd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_hdmi>;
+		regulator-name = "hdmi_pwr_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <70000>;
+		regulator-always-on;
+	};
+
+	sound-hdmi {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sound-hdmi";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai5>;
+			system-clock-direction-out;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&adv_bridge>;
+		};
+	};
+};
+
+&i2c2 {
+	adv_bridge: hdmi@3d {
+		compatible = "adi,adv7535";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hdmi_bridge>;
+		reg = <0x3d>, <0x3e>, <0x3c>, <0x3f>;
+		reg-names = "main", "edid", "cec", "packet";
+		adi,dsi-lanes = <4>;
+		avdd-supply = <&reg_hdmi>;
+		a2vdd-supply = <&reg_hdmi>;
+		dvdd-supply = <&reg_hdmi>;
+		pvdd-supply = <&reg_hdmi>;
+		v1p2-supply = <&reg_hdmi>;
+		v3p3-supply = <&reg_hdmi>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		#sound-dai-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <20000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7535_in>;
+			};
+		};
+	};
+};
+
+&sai5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	#sound-dai-cells = <0>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_hdmi_bridge: hdmibridgegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_reg_hdmi: reghdmigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11              0x16
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0	0xd6
+			MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK	0xd6
+			MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC	0xd6
+		>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index cf07987ccc10..8287a7f66ed3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -3,6 +3,8 @@
  * Copyright 2020 Compass Electronics Group, LLC
  */
 
+#include "imx8mm-overdrive.dtsi"
+
 / {
 	aliases {
 		rtc0 = &rtc;
@@ -47,15 +49,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -76,6 +78,9 @@
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
@@ -112,7 +117,7 @@
 		rohm,reset-snvs-powered;
 
 		#clock-cells = <0>;
-		clocks = <&osc_32k 0>;
+		clocks = <&osc_32k>;
 		clock-output-names = "clk-32k-out";
 
 		regulators {
@@ -231,6 +236,12 @@
 	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		quartz-load-femtofarads = <12500>;
+		wakeup-source;
 	};
 };
 
@@ -267,7 +278,7 @@
 	mmc-pwrseq = <&usdhc1_pwrseq>;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		pinctrl-names = "default";
@@ -283,6 +294,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
@@ -312,6 +325,7 @@
 			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
 			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
 			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10             0x146
 			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
 		>;
 	};
@@ -347,6 +361,12 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x146
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
index 778bdbe228d3..472c584fb3bd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
@@ -46,6 +46,12 @@
 		clock-frequency = <25000000>;
 	};
 
+	clk_xtal32k: clk-xtal32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
 	panel: panel {
 		backlight = <&backlight>;
 		power-supply = <&reg_panel_vcc>;
@@ -77,12 +83,12 @@
 		enable-active-high;
 	};
 
-	watchdog-gpio {
+	watchdog {
 		/* TPS3813 */
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_watchdog_gpio>;
 		compatible = "linux,wdt-gpio";
-		always-enabled;
+		always-running;
 		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		hw_algo = "level";
 		/* Reset triggers in 2..3 seconds */
@@ -114,15 +120,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -162,7 +168,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
 	phy-mode = "rgmii-id";
-	phy-handle = <&fec1_phy>;
+	phy-handle = <&fec1_phy_bcm>;
 	phy-supply = <&buck4_reg>;
 	fsl,magic-packet;
 	status = "okay";
@@ -172,7 +178,7 @@
 		#size-cells = <0>;
 
 		/* Atheros AR8031 PHY */
-		fec1_phy: ethernet-phy@0 {
+		fec1_phy_ath: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 			/*
@@ -183,10 +189,9 @@
 			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <10000>;
-			qca,clk-out-frequency = <125000000>;
-			qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
 			qca,keep-pll-enabled;
 			vddio-supply = <&vddio>;
+			status = "disabled";
 
 			vddio: vddio-regulator {
 				regulator-name = "VDDIO";
@@ -198,6 +203,20 @@
 				regulator-name = "VDDH";
 			};
 		};
+
+		/* Broadcom BCM54213PE PHY */
+		fec1_phy_bcm: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			/*
+			 * Dedicated ENET_INT# and ENET_WOL# signals are
+			 * unused, the PHY does not provide cable detect
+			 * interrupt.
+			 */
+			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+		};
 	};
 };
 
@@ -271,6 +290,9 @@
 	pmic: pmic@4b {
 		compatible = "rohm,bd71847";
 		reg = <0x4b>;
+		#clock-cells = <0>;
+		clocks = <&clk_xtal32k>;
+		clock-output-names = "clk-32k-out";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio1>;
@@ -898,9 +920,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
-		 <&pcieclk 0>;
-	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcieclk 0>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
 	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
 			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
 	assigned-clock-rates = <10000000>, <250000000>;
@@ -928,6 +949,10 @@
 	status = "disabled";
 };
 
+&snvs_rtc {
+	clocks = <&pmic>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
index 6c079c0a3a48..27848cee1670 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
@@ -23,12 +23,11 @@
 &gpmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
 	status = "okay";
 };
 
 &iomuxc {
-	pinctrl_gpmi_nand: gpmi-nand {
+	pinctrl_gpmi_nand: gpminandgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_NAND_ALE_RAWNAND_ALE		0x00000096
 			MX8MM_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B		0x00000096
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts
index b2e8967e9687..c8ff70212602 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 or MIT)
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 //
 // Copyright (c) 2021 emtrion GmbH
 // Author: Frank Erdrich <frank.erdrich@emtrion.com>
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
index 5028f232b6bd..44c2cba41a1f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 or MIT)
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 //
 // Copyright (C) 2021 emtrion GmbH
 // Author: Frank Erdrich <frank.erdrich@emtrion.com>
@@ -104,7 +104,7 @@
 		compatible = "nxp,pca8574";
 		reg = <0x3a>;
 		gpio-controller;
-		#gpio-cells = <1>;
+		#gpio-cells = <2>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
index 0dbdc9ec3fe5..af7dc8d1f5f1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 or MIT)
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 //
 // Copyright 2018 NXP
 // Copyright (C) 2021 emtrion GmbH
@@ -18,14 +18,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_led>;
 
-		green {
+		led-green {
 			label = "som:green";
 			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		red {
+		led-red {
 			label = "som:red";
 			gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
@@ -108,8 +108,6 @@
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-
 	pinctrl_csi_pwn: csi-pwn-grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
@@ -124,7 +122,7 @@
 		>;
 	};
 
-	pinctrl_ecspi1_cs: ecspi1-cs {
+	pinctrl_ecspi1_cs: ecspi1cs-grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x40000
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x40000
@@ -215,7 +213,7 @@
 		>;
 	};
 
-	pinctrl_pmic: pmic-irq {
+	pinctrl_pmic: pmicirq-grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x41
 		>;
@@ -411,7 +409,7 @@
 
 		regulators {
 			buck1_reg: BUCK1 {
-				regulator-name = "BUCK1";
+				regulator-name = "buck1";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1300000>;
 				regulator-boot-on;
@@ -420,7 +418,7 @@
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "BUCK2";
+				regulator-name = "buck2";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1300000>;
 				regulator-boot-on;
@@ -432,7 +430,7 @@
 
 			buck3_reg: BUCK3 {
 				// BUCK5 in datasheet
-				regulator-name = "BUCK3";
+				regulator-name = "buck3";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1350000>;
 				regulator-boot-on;
@@ -441,7 +439,7 @@
 
 			buck4_reg: BUCK4 {
 				// BUCK6 in datasheet
-				regulator-name = "BUCK4";
+				regulator-name = "buck4";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -450,7 +448,7 @@
 
 			buck5_reg: BUCK5 {
 				// BUCK7 in datasheet
-				regulator-name = "BUCK5";
+				regulator-name = "buck5";
 				regulator-min-microvolt = <1605000>;
 				regulator-max-microvolt = <1995000>;
 				regulator-boot-on;
@@ -459,7 +457,7 @@
 
 			buck6_reg: BUCK6 {
 				// BUCK8 in datasheet
-				regulator-name = "BUCK6";
+				regulator-name = "buck6";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1400000>;
 				regulator-boot-on;
@@ -467,7 +465,7 @@
 			};
 
 			ldo1_reg: LDO1 {
-				regulator-name = "LDO1";
+				regulator-name = "ldo1";
 				regulator-min-microvolt = <1600000>;
 				regulator-max-microvolt = <1900000>;
 				regulator-boot-on;
@@ -475,7 +473,7 @@
 			};
 
 			ldo2_reg: LDO2 {
-				regulator-name = "LDO2";
+				regulator-name = "ldo2";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <900000>;
 				regulator-boot-on;
@@ -483,7 +481,7 @@
 			};
 
 			ldo3_reg: LDO3 {
-				regulator-name = "LDO3";
+				regulator-name = "ldo3";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -491,7 +489,7 @@
 			};
 
 			ldo4_reg: LDO4 {
-				regulator-name = "LDO4";
+				regulator-name = "ldo4";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
@@ -499,7 +497,7 @@
 			};
 
 			ldo6_reg: LDO6 {
-				regulator-name = "LDO6";
+				regulator-name = "ldo6";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
new file mode 100644
index 000000000000..87fe3ebedb8d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Emtop Embedded Solutions
+ *
+ * Author: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
+ * Author: Tarang Raval <tarang.raval@siliconsignals.io>
+ */
+
+/dts-v1/;
+
+#include "imx8mm-emtop-som.dtsi"
+
+/ {
+	model = "Emtop Embedded Solutions i.MX8M Mini Baseboard V1";
+	compatible = "ees,imx8mm-emtop-baseboard", "ees,imx8mm-emtop-som",
+		"fsl,imx8mm";
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			high_speed_ep: endpoint {
+				remote-endpoint = <&usb_hs_ep>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-1 {
+		        label = "buzzer";
+		        gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		        default-state = "off";
+		};
+	};
+
+	osc_can: clock-osc-can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+		clock-output-names = "osc-can";
+	};
+
+	reg_audio: regulator-audio {
+	        compatible = "regulator-fixed";
+	        regulator-name = "wm8904_supply";
+	        regulator-min-microvolt = <1800000>;
+	        regulator-max-microvolt = <1800000>;
+	        regulator-always-on;
+	};
+
+	reg_wifi_vmmc: regulator-wifi-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <20000>;
+	};
+
+	sound-wm8904 {
+	        compatible = "simple-audio-card";
+	        simple-audio-card,bitclock-master = <&dailink_master>;
+	        simple-audio-card,format = "i2s";
+	        simple-audio-card,frame-master = <&dailink_master>;
+	        simple-audio-card,name = "wm8904-audio";
+	        simple-audio-card,mclk-fs = <256>;
+	        simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Headphone Jack", "MICBIAS",
+			"IN1L", "Headphone Jack";
+
+	        simple-audio-card,widgets =
+	                "Microphone","Headphone Jack",
+	                "Headphone", "Headphone Jack",
+	                "Line", "Line In Jack";
+
+	        dailink_master: simple-audio-card,codec {
+	                sound-dai = <&wm8904>;
+	        };
+
+	        simple-audio-card,cpu {
+	                sound-dai = <&sai3>;
+	        };
+	};
+
+	sound-spdif {
+	        compatible = "fsl,imx-audio-spdif";
+	        model = "imx-spdif";
+	        spdif-controller = <&spdif1>;
+	        spdif-out;
+	        spdif-in;
+	};
+};
+
+/* CAN BUS */
+&ecspi2 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_ecspi2>;
+        status = "okay";
+
+        can: can@0 {
+                compatible = "microchip,mcp2515";
+                reg = <0>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&pinctrl_canbus>;
+                clocks = <&osc_can>;
+                interrupt-parent = <&gpio1>;
+                interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+                spi-max-frequency = <10000000>;
+        };
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			vddio-supply = <&vddio>;
+
+			vddio: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	wm8904: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+		clock-names = "mclk";
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8025";
+		reg = <0x32>;
+	};
+};
+
+/* AUDIO */
+&sai3 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_sai3>;
+        assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+        assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+        assigned-clock-rates = <24576000>;
+        status = "okay";
+};
+
+&spdif1 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_spdif1>;
+        assigned-clocks = <&clk IMX8MM_CLK_SPDIF1>;
+        assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+        assigned-clock-rates = <24576000>;
+        clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_24M>,
+                <&clk IMX8MM_CLK_SPDIF1>, <&clk IMX8MM_CLK_DUMMY>,
+                <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+                <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_DUMMY>,
+                <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+                <&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>;
+        clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3",
+                "rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba", "pll8k", "pll11k";
+        status = "okay";
+};
+
+/* USBOTG */
+&usbotg1 {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb_hs_ep: endpoint {
+			remote-endpoint = <&high_speed_ep>;
+		};
+	};
+};
+
+&usbotg2 {
+        dr_mode = "host";
+        status = "okay";
+};
+
+/* Wifi */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wifi_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	non-removable;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+/* SD-card */
+&usdhc2 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_usdhc2>;
+        pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+        pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+        cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+        bus-width = <4>;
+        status = "okay";
+};
+
+&iomuxc {
+
+	pinctrl_canbus: canbusgrp {
+	        fsl,pins = <
+		        MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14              0x14
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SS0_ECSPI2_SS0  		0x82
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
+		>;
+	};
+
+	pinctrl_usb_otg: usbotggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x140   /* otg_id */
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x19    /* otg_vbus */
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC                 0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO               0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3           0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2           0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1           0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0           0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3           0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2           0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1           0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0           0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC           0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC           0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL     0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL     0x1f
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22                0x19
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+	        fsl,pins = <
+	                MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL                  0x400001c3
+	                MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA                  0x400001c3
+	        >;
+	};
+
+	pinctrl_sai3: sai3grp {
+	        fsl,pins = <
+	                MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC             0xd6
+	                MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK              0xd6
+	                MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK                0xd6
+	                MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0             0xd6
+	                MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0             0xd6
+	        >;
+	};
+
+	pinctrl_spdif1: spdif1grp {
+	        fsl,pins = <
+	                MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT                0xd6
+	        >;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK                 0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD                 0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0             0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1             0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2             0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3             0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK         	0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD         	0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0     	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1     	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2     	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3     	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK         	0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD         	0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0     	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1     	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2     	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3     	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1-gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10             0x41    /* wl_reg_on */
+			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9                0x41    /* wl_host_wake */
+			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K      0x141   /* LP0: 32KHz */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+	        fsl,pins = <
+	                MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         	0x190
+	                MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         	0x1d0
+	                MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     	0x1d0
+	                MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     	0x1d0
+	                MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     	0x1d0
+	                MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     	0x1d0
+	        >;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+	        fsl,pins = <
+	                MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         	0x194
+	                MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         	0x1d4
+	                MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     	0x1d4
+	                MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     	0x1d4
+	                MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     	0x1d4
+	                MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     	0x1d4
+	        >;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+	        fsl,pins = <
+	                MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         	0x196
+	                MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         	0x1d6
+	                MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     	0x1d6
+	                MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     	0x1d6
+	                MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     	0x1d6
+	                MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     	0x1d6
+	        >;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi
new file mode 100644
index 000000000000..67d22d3768aa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Emtop Embedded Solutions
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/usb/pd.h>
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Emtop Embedded Solutions i.MX8M Mini SOM-IMX8MMLPD4 SoM";
+	compatible = "ees,imx8mm-emtop-som", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck3: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <945000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1710000>;
+				regulator-max-microvolt = <1890000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <945000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <3600000>;
+			};
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_led: emtop-gpio-led-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16			0x19
+			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29			0x19
+		>;
+	};
+
+	pinctrl_i2c1: emtop-i2c1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL				0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA				0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: emtop-pmic-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3			0x41
+		>;
+	};
+
+	pinctrl_uart2: emtop-uart2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX			0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX			0x140
+		>;
+	};
+
+	pinctrl_usdhc3: emtop-usdhc3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK			0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD			0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0			0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1			0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2			0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3			0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4			0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5			0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6			0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7			0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE			0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: emtop-usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK			0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD			0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0			0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1			0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2			0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3			0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4			0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5			0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6			0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7			0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE			0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: emtop-usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK			0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD			0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0			0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1			0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2			0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3			0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4			0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5			0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6			0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7			0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE			0x196
+		>;
+	};
+
+	pinctrl_wdog: emtop-wdog-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B			0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index a2b24d4d4e3e..b68954bcc383 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -23,15 +23,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index 7d6317d95b13..ff7ca2075230 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -19,6 +19,18 @@
 		reg = <0x0 0x40000000 0 0x80000000>;
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -56,9 +68,31 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
 		enable-active-high;
 	};
 
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vddext_3v3: regulator-vddext-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDEXT_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000 0>;
@@ -113,6 +147,7 @@
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&cpudai>;
 		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,mclk-fs = <256>;
 		simple-audio-card,widgets =
 			"Line", "Left Line Out Jack",
 			"Line", "Right Line Out Jack";
@@ -124,13 +159,44 @@
 			sound-dai = <&sai3>;
 			dai-tdm-slot-num = <2>;
 			dai-tdm-slot-width = <32>;
+			system-clock-direction-out;
 		};
 
 		simple-audio-card,codec {
 			sound-dai = <&wm8524>;
-			clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
 		};
 	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			link-name = "micfil hifi";
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_in: spdif-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		audio-cpu = <&spdif1>;
+		audio-codec = <&spdif_out>, <&spdif_in>;
+	};
 };
 
 &A53_0 {
@@ -193,7 +259,7 @@
 		rohm,reset-snvs-powered;
 
 		#clock-cells = <0>;
-		clocks = <&osc_32k 0>;
+		clocks = <&osc_32k>;
 		clock-output-names = "clk-32k-out";
 
 		regulators {
@@ -302,21 +368,51 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
+	hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		adi,dsi-lanes = <4>;
+		avdd-supply = <&buck5_reg>;
+		dvdd-supply = <&buck5_reg>;
+		pvdd-supply = <&buck5_reg>;
+		a2vdd-supply = <&buck5_reg>;
+		v3p3-supply = <&reg_vddext_3v3>;
+		v1p2-supply = <&buck5_reg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+
+		};
+	};
+
 	ptn5110: tcpc@50 {
-		compatible = "nxp,ptn5110";
+		compatible = "nxp,ptn5110", "tcpci";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec1>;
 		reg = <0x50>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <11 8>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		status = "okay";
 
-		port {
-			typec1_dr_sw: endpoint {
-				remote-endpoint = <&usb1_drd_sw>;
-			};
-		};
-
 		typec1_con: connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
@@ -328,10 +424,21 @@
 				     PDO_VAR(5000, 20000, 3000)>;
 			op-sink-microwatt = <15000000>;
 			self-powered;
+
+			port {
+				typec1_dr_sw: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
 		};
 	};
 };
 
+
+&csi {
+	status = "okay";
+};
+
 &i2c3 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -339,10 +446,79 @@
 	status = "okay";
 
 	pca6416: gpio@20 {
-		compatible = "ti,tca6416";
+		compatible = "nxp,pca6416";
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		vcc-supply = <&buck4_reg>;
+	};
+
+	camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_camera>;
+		clocks = <&clk IMX8MM_CLK_CLKO1>;
+		clock-names = "xclk";
+		assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;
+		assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		DOVDD-supply = <&buck5_reg>;
+		AVDD-supply = <&reg_1v8>;
+		DVDD-supply = <&reg_1v5>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&imx8mm_mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&micfil {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX8MM_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <196608000>;
+	status = "okay";
+};
+
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		port@0 {
+			imx8mm_mipi_csi_in: endpoint {
+				remote-endpoint = <&ov5640_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7535_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
 	};
 };
 
@@ -358,9 +534,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
-		 <&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
 	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
 			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
 	assigned-clock-rates = <10000000>, <250000000>;
@@ -370,6 +545,19 @@
 	status = "okay";
 };
 
+&pcie0_ep {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "disabled";
+};
+
 &sai2 {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
@@ -383,9 +571,17 @@
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
-	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
-	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
-	assigned-clock-rates = <24576000>;
+	assigned-clocks = <&clk IMX8MM_AUDIO_PLL1>,
+			  <&clk IMX8MM_AUDIO_PLL2>,
+			  <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <393216000>, <361267200>, <24576000>;
+	fsl,sai-mclk-direction-output;
+	clocks = <&clk IMX8MM_CLK_SAI3_IPG>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_SAI3_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
+		<&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
 	status = "okay";
 };
 
@@ -393,12 +589,34 @@
 	status = "okay";
 };
 
+&spdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif1>;
+	assigned-clocks = <&clk IMX8MM_CLK_SPDIF1>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_24M>,
+		 <&clk IMX8MM_CLK_SPDIF1>, <&clk IMX8MM_CLK_DUMMY>,
+		 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+		 <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_DUMMY>,
+		 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+		 <&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3",
+		      "rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba",
+		      "pll8k", "pll11k";
+	status = "okay";
+};
+
 &uart2 { /* console */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 };
 
+&usbphynop1 {
+	wakeup-source;
+};
+
 &usbotg1 {
 	dr_mode = "otg";
 	hnp-disable;
@@ -516,6 +734,18 @@
 		>;
 	};
 
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK        0xd6
+			MX8MM_IOMUXC_SAI5_RXC_PDM_CLK           0xd6
+			MX8MM_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0        0xd6
+			MX8MM_IOMUXC_SAI5_RXD1_PDM_DATA1        0xd6
+			MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2        0xd6
+			MX8MM_IOMUXC_SAI5_RXD3_PDM_DATA3        0xd6
+		>;
+	};
+
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x141
@@ -546,6 +776,13 @@
 		>;
 	};
 
+	pinctrl_spdif1: spdif1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT	0xd6
+			MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN		0xd6
+		>;
+	};
+
 	pinctrl_typec1: typec1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11	0x159
@@ -612,4 +849,12 @@
 			MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT	0x06
 		>;
 	};
+
+	pinctrl_camera: cameragrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59
+		>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
new file mode 100644
index 000000000000..164df627a213
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019-2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mm-evk.dtsi"
+
+/ {
+	model = "FSL i.MX8MM EVKB";
+	compatible = "fsl,imx8mm-evkb", "fsl,imx8mm";
+};
+
+&i2c1 {
+	/delete-node/ pmic@4b;
+
+	pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* VDD_SOC with PCIe */
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VDD_ARM */
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			/* VDD_GPU, VDD_VPU, VDD_DRAM */
+			buck3_reg: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_3V3 */
+			buck4_reg: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1V8, NVCC_1V8, NVCC_ENET */
+			buck5_reg: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_DRAM for LPDDR4 */
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_SNVS_1P8 */
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_SNVS_0P8 */
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_*_1V8 */
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_PHY_0V9 */
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_SD2 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi
index 9e6170d9394e..def7bb5d37cf 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) 2018 NXP
  * Copyright (c) 2019 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 / {
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts
new file mode 100644
index 000000000000..055faae79930
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018 Bang & Olufsen
+ * Copyright 2022 Pengutronix
+ */
+
+/dts-v1/;
+
+#include "imx8mm-innocomm-wb15.dtsi"
+
+/ {
+	model = "InnoComm WB15-EVK";
+	compatible = "innocomm,wb15-evk", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			label = "debug";
+			gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_vsd_3v3: regulator-vsd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vsd_3v3>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_ethphy: regulator-eth-phy {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fec_phy_reg>;
+		regulator-name = "PHY_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			phy-supply = <&reg_ethphy>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_vsd_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fec-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x03
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x03
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+		>;
+	};
+
+	pinctrl_fec_phy: fec-phy-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_fec_phy_reg: fec-phy-reg-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x16
+		>;
+	};
+
+	pinctrl_gpio_leds: led-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0xd6
+		>;
+	};
+
+	pinctrl_reg_vsd_3v3: reg-vsd-3v3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi
new file mode 100644
index 000000000000..299752aa8277
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018 Bang & Olufsen
+ */
+
+#include "imx8mm.dtsi"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	reg_modem: regulator-modem {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_modem_regulator>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "epdev_on";
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_3v3_out: regulator-3v3-out {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_OUT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <105000>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <850000>;
+				rohm,dvs-idle-voltage = <850000>;
+				rohm,dvs-suspend-voltage = <850000>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// buck5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// buck6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// buck7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// buck8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
+	fsl,max-link-speed = <1>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&uart1 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4349-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_modem_bt>;
+		device-wakeup-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&reg_3v3_out>;
+		vddio-supply = <&reg_3v3_out>;
+		clocks = <&osc_32k>;
+		max-speed = <3000000>;
+		clock-names = "extclk";
+	};
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+/delete-node/ &sec_jr1; /* Job ring in use by OP-TEE */
+
+&iomuxc {
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pcie0-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B	0x61
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x6
+		>;
+	};
+
+	pinctrl_modem_bt: modem-bt-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5			0x19
+			MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3		0x19
+			MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x19
+			MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x19
+			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x141
+		>;
+	};
+
+	pinctrl_modem_regulator: modem-reg-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16    0x41
+		>;
+	};
+
+	pinctrl_pmic: pmic-irq-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d0
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x190
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d4
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x194
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d6
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x196
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_wdog: wdog-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-iot-gateway.dts b/arch/arm64/boot/dts/freescale/imx8mm-iot-gateway.dts
new file mode 100644
index 000000000000..370558a8ba46
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-iot-gateway.dts
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2020 CompuLab
+
+#include "imx8mm-ucm-som.dtsi"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+/ {
+	model = "CompuLab i.MX8MM IoT Gateway";
+	compatible = "compulab,imx8mm-iot-gateway", "compulab,imx8mm-ucm-som", "fsl,imx8mm";
+
+	regulator-usbhub-ena {
+		compatible = "regulator-fixed";
+		regulator-name = "usbhub_ena";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-usbhub-rst {
+		compatible = "regulator-fixed";
+		regulator-name = "usbhub_rst";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-uart1-mode {
+		compatible = "regulator-fixed";
+		regulator-name = "uart1_mode";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-uart1-duplex {
+		compatible = "regulator-fixed";
+		regulator-name = "uart1_duplex";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-uart1-shdn {
+		compatible = "regulator-fixed";
+		regulator-name = "uart1_shdn";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-uart1-trmen {
+		compatible = "regulator-fixed";
+		regulator-name = "uart1_trmen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 25 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	regulator-usdhc2-v {
+		compatible = "regulator-fixed";
+		regulator-name = "usdhc2_v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-mpcie2-rst {
+		compatible = "regulator-fixed";
+		regulator-name = "mpcie2_rst";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-mpcie2lora-dis {
+		compatible = "regulator-fixed";
+		regulator-name = "mpcie2lora_dis";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	pcie0_refclk: clock-pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c08";
+		reg = <0x54>;
+		pagesize = <16>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	dr_mode = "host";
+	usb-role-switch;
+	status = "okay";
+
+	usbhub@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb9514>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	mmc-ddr-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* mPCIe2 */
+			MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21		0x140
+			MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22		0x140
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1csgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x40000
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x140
+		>;
+	};
+
+	pinctrl_usb9514: usb9514grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x140 /* USB_PS_EN */
+			MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24		0x140 /* HUB_RSTn */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-lte.dtso b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-lte.dtso
new file mode 100644
index 000000000000..324004b0eca3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-lte.dtso
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2025 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include "imx8mm-pinfunc.h"
+
+&{/} {
+	compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-user {
+			label = "user";
+			linux,code = <BTN_0>;
+			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led_lte>;
+
+		lte-led1-b {
+			label = "lte-led1-blue";
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led1-g {
+			label = "lte-led1-green";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led1-r {
+			label = "lte-led1-red";
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led2-b {
+			label = "lte-led2-blue";
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led2-g {
+			label = "lte-led2-green";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led2-r {
+			label = "lte-led2-red";
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ecspi3 {
+	status = "disabled";
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	tpm@2e {
+		compatible = "infineon,slb9673", "tcg,tpm-tis-i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		reg = <0x2e>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3>;
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "VDD_IO_REF", "TPM_PIRQ#",
+			  "TPM_RESET# ", "", "", "",
+			  "", "LTE_LED1_B", "LTE_LED1_G", "",
+			  "";
+
+	vdd-io-ref-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		line-name = "VDD_IO_REF";
+		output-high;
+	};
+
+	tpm-reset-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		line-name = "TPM_RESET#";
+		output-low;
+	};
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+	gpio-line-names = "", "", "LTE_RESET", "",
+			  "", "", "", "",
+			  "", "", "", "LTE_PWRKEY",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "LTE_PWR_EN";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "LTE_LED2_G", "LTE_LED1_R",
+			  "LTE_LED2_R", "LTE_LED2_B";
+};
+
+&iomuxc {
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA04_GPIO3_IO10		0x19 /* VDD_IO_REF */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2		0x19 /* LTE_RESET */
+			MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 		0x19 /* LTE_PWRKEY */
+			MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20		0x19 /* LTE_PWR_EN */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12		0x19 /* Pushbutton */
+		>;
+	};
+
+	pinctrl_gpio_led_lte: gpioledltegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_GPIO3_IO17		0x19 /* LTE_LED1_B */
+			MX8MM_IOMUXC_NAND_WP_B_GPIO3_IO18		0x19 /* LTE_LED1_G */
+			MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23		0x19 /* LTE_LED1_R */
+			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19 /* LTE_LED2_B */
+			MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22		0x19 /* LTE_LED2_G */
+			MX8MM_IOMUXC_UART2_RXD_GPIO5_IO24		0x19 /* LTE_LED2_R */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x40000083 /* I2C_A_SCL */
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x40000083 /* I2C_A_SDA */
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA05_GPIO3_IO11		0x19 /* TPM_PIRQ# */
+			MX8MM_IOMUXC_NAND_DATA06_GPIO3_IO12		0x39 /* TPM_RESET# */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
new file mode 100644
index 000000000000..3a166cf0afcb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mm-kontron-osm-s.dtsi"
+
+/ {
+	model = "Kontron BL i.MX8MM OSM-S (N802X S)";
+	compatible = "kontron,imx8mm-bl-osm-s", "kontron,imx8mm-osm-s", "fsl,imx8mm";
+
+	aliases {
+		ethernet1 = &usbnet;
+	};
+
+	/* fixed crystal dedicated to mcp2542fd */
+	osc_can: clock-osc-can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "osc-can";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led3 {
+			label = "led3";
+			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pwm-beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm2 0 5000 0>;
+	};
+
+	reg_vdd_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vdd-5v";
+	};
+};
+
+&ecspi2 {
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp251xfd";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can>;
+		clocks = <&osc_can>;
+		interrupts-extended = <&gpio5 1 IRQ_TYPE_LEVEL_LOW>;
+		/*
+		 * Limit the SPI clock to 15 MHz to prevent issues
+		 * with corrupted data due to chip errata.
+		 */
+		spi-max-frequency = <15000000>;
+		vdd-supply = <&reg_vdd_3v3>;
+		xceiver-supply = <&reg_vdd_5v>;
+	};
+};
+
+&ecspi3 {
+	status = "okay";
+
+	eeram@0 {
+		compatible = "microchip,48l640";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_rgmii>;
+	phy-connection-type = "rgmii-id";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-id4f51.e91b";
+			reg = <0>;
+			reset-assert-us = <10000>;
+			reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/*
+ * Rename SoM signals according to board usage:
+ *   GPIO_B_0      -> DIO1_OUT
+ *   GPIO_B_1      -> DIO2_OUT
+ */
+&gpio1 {
+	gpio-line-names = "", "GPIO_A_0", "", "GPIO_A_1",
+			  "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4",
+			  "GPIO_A_5", "GPIO_A_6", "GPIO_A_7", "DIO1_OUT",
+			  "DIO2_OUT", "USB_A_OC#", "CAM_MCK", "USB_B_OC#",
+			  "ETH_MDC", "ETH_MDIO", "ETH_A_(S)(R)(G)MII_TXD3",
+			  "ETH_A_(S)(R)(G)MII_TXD2", "ETH_A_(S)(R)(G)MII_TXD1",
+			  "ETH_A_(S)(R)(G)MII_TXD0", "ETH_A_(R)(G)MII_TX_EN(_ER)",
+			  "ETH_A_(R)(G)MII_TX_CLK", "ETH_A_(R)(G)MII_RX_DV(_ER)",
+			  "ETH_A_(R)(G)MII_RX_CLK", "ETH_A_(S)(R)(G)MII_RXD0",
+			  "ETH_A_(S)(R)(G)MII_RXD1", "ETH_A_(R)(G)MII_RXD2",
+			  "ETH_A_(R)(G)MII_RXD3";
+};
+
+/*
+ * Rename SoM signals according to board usage:
+ *   GPIO_B_2      -> DIO3_OUT
+ *   GPIO_B_3      -> DIO4_OUT
+ */
+&gpio3 {
+	gpio-line-names = "GPIO_C_5", "GPIO_C_4", "SDIO_B_CD#", "SDIO_B_D5",
+			  "SDIO_B_D6", "SDIO_B_D7", "GPIO_C_0", "GPIO_C_1",
+			  "GPIO_C_2", "GPIO_C_3", "SDIO_B_D0", "SDIO_B_D1",
+			  "SDIO_B_D2", "SDIO_B_D3", "", "SDIO_B_D4",
+			  "CARRIER_PWR_EN", "SDIO_B_CLK", "SDIO_B_CMD", "DIO3_OUT",
+			  "USB_B_EN", "DIO4_OUT", "PCIe_CLKREQ#", "PCIe_A_PERST#",
+			  "PCIe_WAKE#", "USB_A_EN";
+};
+
+/*
+ * Rename SoM signals according to board usage:
+ *   GPIO_B_4      -> DIO1_IN
+ *   GPIO_B_5      -> DIO2_IN
+ *   GPIO_B_6      -> DIO3_IN
+ *   GPIO_B_7      -> DIO4_IN
+ */
+&gpio4 {
+	gpio-line-names = "GPIO_C_7", "", "I2S_A_DATA_IN", "I2S_B_DATA_IN",
+			  "DIO1_IN", "BOOT_SEL0#", "BOOT_SEL1#", "",
+			  "", "", "I2S_LRCLK", "I2S_BITCLK",
+			  "I2S_A_DATA_OUT", "I2S_B_DATA_OUT", "DIO2_IN", "DIO3_IN",
+			  "DIO4_IN", "SPI_A_/WP_(IO2)", "SPI_A_/HOLD_(IO3)", "GPIO_C_6",
+			  "I2S_MCLK", "UART_A_TX", "UART_A_RX", "UART_A_CTS",
+			  "UART_A_RTS", "", "", "",
+			  "PCIe_SM_ALERT", "UART_B_RTS", "UART_B_CTS", "UART_B_RX";
+};
+
+&i2c3 {
+	status = "okay";
+
+	usb-hub@2c {
+		compatible = "microchip,usb2514b";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_hub>;
+		reg = <0x2c>;
+		non-removable-ports = <0>, <3>;
+		reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "disabled";
+};
+
+&reg_usdhc2_vcc {
+	status = "disabled";
+};
+
+&reg_usdhc3_vcc {
+	status = "disabled";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	linux,rs485-enabled-at-boot-time;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	/* VBUS is controlled by the hub */
+	/delete-property/ vbus-supply;
+
+	usb1@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbnet: ethernet@1 {
+			compatible = "usbb95,772b";
+			reg = <1>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+};
+
+&usdhc2 {
+	vmmc-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can: cangrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1			0x19  /* SDIO_B_PWR_EN */
+		>;
+	};
+
+	pinctrl_usb_hub: usbhubgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19 /* SDIO_B_WP */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
new file mode 100644
index 000000000000..e756fe5db56b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
@@ -0,0 +1,498 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2019 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mm-kontron-sl.dtsi"
+
+/ {
+	model = "Kontron BL i.MX8MM (N801X S)";
+	compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm";
+
+	aliases {
+		ethernet1 = &usbnet;
+		rtc0 = &rx8900;
+		rtc1 = &snvs_rtc;
+	};
+
+	/* fixed crystal dedicated to mcp2515 */
+	osc_can: clock-osc-can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+		clock-output-names = "osc-can";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_in_conn: endpoint {
+				remote-endpoint = <&bridge_out_conn>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led3 {
+			label = "led3";
+			gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+		};
+
+		led4 {
+			label = "led4";
+			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led5 {
+			label = "led5";
+			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led6 {
+			label = "led6";
+			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pwm-beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm2 0 5000 0>;
+	};
+
+	reg_rst_eth2: regulator-rst-eth2 {
+		compatible = "regulator-fixed";
+		regulator-name = "rst-usb-eth2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_eth2>;
+		gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_vdd_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	can0: can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can>;
+		clocks = <&osc_can>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&reg_vdd_3v3>;
+		xceiver-supply = <&reg_vdd_5v>;
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-connection-type = "rgmii-rxid";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			reset-assert-us = <1>;
+			reset-deassert-us = <15000>;
+			reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+
+	dsi_mux_sel_hdmi: dsi-mux-sel-hdmi-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "dsi-mux-sel";
+	};
+
+	dsi_mux_sel_lvds: dsi-mux-sel-lvds-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "dsi-mux-sel";
+		status = "disabled";
+	};
+
+	dsi-mux-oe-hog {
+		gpio-hog;
+		gpios = <15 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "dsi-mux-oe";
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	lvds: bridge@2c {
+		compatible = "ti,sn65dsi84";
+		reg = <0x2c>;
+		enable-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sn65dsi84>;
+		status = "disabled";
+	};
+
+	hdmi: hdmi@39 {
+		compatible = "adi,adv7535";
+		reg = <0x39>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7535>;
+		adi,dsi-lanes = <4>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		a2vdd-supply = <&reg_vdd_1v8>;
+		avdd-supply = <&reg_vdd_1v8>;
+		dvdd-supply = <&reg_vdd_1v8>;
+		pvdd-supply = <&reg_vdd_1v8>;
+		v1p2-supply = <&reg_vdd_1v8>;
+		v3p3-supply = <&reg_vdd_3v3>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_in_dsi_hdmi: endpoint {
+					remote-endpoint = <&mipi_dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_out_conn: endpoint {
+					remote-endpoint = <&hdmi_in_conn>;
+				};
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	rx8900: rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <54000000>;
+	status = "okay";
+};
+
+&mipi_dsi_out {
+	remote-endpoint = <&bridge_in_dsi_hdmi>;
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&reg_nvcc_sd {
+	sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	/*
+	 * During bootup the CTS needs to stay LOW, which is only possible if this
+	 * pin is controlled by a GPIO. The UART IP always sets CTS to HIGH if not
+	 * running. So using 'uart-has-rtscts' is not a good choice here! There are
+	 * workarounds for this, but they introduce unnecessary complexity and are
+	 * therefore avoided here. For more information about this see:
+	 * https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id=79d0224f6bf296d04cd843cfc49921b19c97bb09
+	 */
+	rts-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	usb1@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbnet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio>;
+
+	pinctrl_adv7535: adv7535grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16		0x19
+		>;
+	};
+
+	pinctrl_can: cangrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x82
+			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x82
+			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x82
+			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x19 /* PHY RST */
+			MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25		0x19 /* ETH IRQ */
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x19
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7		0x19
+			MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8		0x19
+			MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9		0x19
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17		0x19
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x19
+			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x19
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x19
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14		0x19
+			MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15		0x19
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x40000083
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x40000083
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x19
+		>;
+	};
+
+	pinctrl_sn65dsi84: sn65dsi84grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26		0x19
+			MX8MM_IOMUXC_SD2_WP_GPIO2_IO20			0x19
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29		0x19
+		>;
+	};
+
+	pinctrl_usb_eth2: usbeth2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000d0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
new file mode 100644
index 000000000000..57d0739fcce3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mm-pinfunc.h"
+
+&{/} {
+	compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <100>;
+	};
+
+	panel {
+		compatible = "jenson,bl-jt60050-01a", "panel-lvds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		backlight = <&backlight>;
+		data-mapping = "vesa-24";
+		enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		height-mm = <86>;
+		width-mm = <154>;
+
+		panel-timing {
+			clock-frequency = <51200000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hsync-len = <1>;
+			hfront-porch = <160>;
+			hback-porch = <160>;
+			vsync-len = <1>;
+			vfront-porch = <12>;
+			vback-porch = <23>;
+		};
+
+		port {
+			panel_out_bridge: endpoint {
+				remote-endpoint = <&bridge_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_mux_sel_hdmi {
+	status = "disabled";
+};
+
+&dsi_mux_sel_lvds {
+	status = "okay";
+};
+
+&mipi_dsi_out {
+	remote-endpoint = <&bridge_in_dsi_lvds>;
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3>;
+
+	panel-rst-hog {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "panel-reset";
+	};
+
+	panel-stby-hog {
+		gpio-hog;
+		gpios = <21 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "panel-standby";
+	};
+
+	panel-hinv-hog {
+		gpio-hog;
+		gpios = <24 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "panel-horizontal-invert";
+	};
+
+	panel-vinv-hog {
+		gpio-hog;
+		gpios = <25 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "panel-vertical-invert";
+	};
+};
+
+&hdmi {
+	status = "disabled";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	gt911: touchscreen@5d {
+		compatible = "goodix,gt928";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 8>;
+		reset-gpios = <&gpio3 23 0>;
+		irq-gpios = <&gpio3 22 0>;
+	};
+
+	st1633: touchscreen@55 {
+		compatible = "sitronix,st1633";
+		reg = <0x55>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupts = <22 8>;
+		interrupt-parent = <&gpio3>;
+		gpios = <&gpio3 22 0>;
+		status = "disabled";
+	};
+};
+
+&lvds {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			bridge_in_dsi_lvds: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			bridge_out_panel: endpoint {
+				remote-endpoint = <&panel_out_bridge>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24		0x19
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x19
+			MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21		0x19
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x19
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x40000083
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x40000083
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x19
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT		0x6
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22		0x19
+			MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23		0x19
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
deleted file mode 100644
index 23be1ec538ba..000000000000
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
+++ /dev/null
@@ -1,350 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright (C) 2019 Kontron Electronics GmbH
- */
-
-/dts-v1/;
-
-#include "imx8mm-kontron-n801x-som.dtsi"
-
-/ {
-	model = "Kontron i.MX8MM N801X S";
-	compatible = "kontron,imx8mm-n801x-s", "kontron,imx8mm-n801x-som", "fsl,imx8mm";
-
-	aliases {
-		ethernet1 = &usbnet;
-	};
-
-	/* fixed crystal dedicated to mcp2515 */
-	osc_can: clock-osc-can {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <16000000>;
-		clock-output-names = "osc-can";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_led>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			label = "led2";
-			gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
-		};
-
-		led3 {
-			label = "led3";
-			gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
-		};
-
-		led4 {
-			label = "led4";
-			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
-		};
-
-		led5 {
-			label = "led5";
-			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
-		};
-
-		led6 {
-			label = "led6";
-			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	pwm-beeper {
-		compatible = "pwm-beeper";
-		pwms = <&pwm2 0 5000 0>;
-	};
-
-	reg_rst_eth2: regulator-rst-eth2 {
-		compatible = "regulator-fixed";
-		regulator-name = "rst-usb-eth2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_eth2>;
-		gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_vdd_5v: regulator-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd-5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	can0: can@0 {
-		compatible = "microchip,mcp2515";
-		reg = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can>;
-		clocks = <&osc_can>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
-		spi-max-frequency = <10000000>;
-		vdd-supply = <&reg_vdd_3v3>;
-		xceiver-supply = <&reg_vdd_5v>;
-	};
-};
-
-&ecspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-connection-type = "rgmii-rxid";
-	phy-handle = <&ethphy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@0 {
-			reg = <0>;
-			reset-assert-us = <1>;
-			reset-deassert-us = <15000>;
-			reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	linux,rs485-enabled-at-boot-time;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "otg";
-	over-current-active-low;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	usb1@1 {
-		compatible = "usb424,9514";
-		reg = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbnet: ethernet@1 {
-			compatible = "usb424,ec00";
-			reg = <1>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-		};
-	};
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	vmmc-supply = <&reg_vdd_3v3>;
-	vqmmc-supply = <&reg_nvcc_sd>;
-	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio>;
-
-	pinctrl_can: cangrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
-			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
-			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
-			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19
-		>;
-	};
-
-	pinctrl_ecspi3: ecspi3grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x82
-			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x82
-			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x82
-			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
-			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
-			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
-			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
-			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
-			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
-			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
-			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
-			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
-			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
-			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
-			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
-			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
-			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
-			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x19 /* PHY RST */
-			MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25		0x19 /* ETH IRQ */
-		>;
-	};
-
-	pinctrl_gpio_led: gpioledgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x19
-			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7		0x19
-			MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8		0x19
-			MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9		0x19
-			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17		0x19
-			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x19
-			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x19
-		>;
-	};
-
-	pinctrl_gpio: gpiogrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19
-			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
-			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
-			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19
-			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
-			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x19
-			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
-			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x19
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
-		>;
-	};
-
-	pinctrl_usb_eth2: usbeth2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-		>;
-	};
-};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
deleted file mode 100644
index 8f90eb02550d..000000000000
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
+++ /dev/null
@@ -1,299 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright (C) 2019 Kontron Electronics GmbH
- */
-
-#include "imx8mm.dtsi"
-
-/ {
-	model = "Kontron i.MX8MM N801X SoM";
-	compatible = "kontron,imx8mm-n801x-som", "fsl,imx8mm";
-
-	memory@40000000 {
-		device_type = "memory";
-		/*
-		 * There are multiple SoM flavors with different DDR sizes.
-		 * The smallest is 1GB. For larger sizes the bootloader will
-		 * update the reg property.
-		 */
-		reg = <0x0 0x40000000 0 0x80000000>;
-	};
-
-	chosen {
-		stdout-path = &uart3;
-	};
-};
-
-&A53_0 {
-	cpu-supply = <&reg_vdd_arm>;
-};
-
-&A53_1 {
-	cpu-supply = <&reg_vdd_arm>;
-};
-
-&A53_2 {
-	cpu-supply = <&reg_vdd_arm>;
-};
-
-&A53_3 {
-	cpu-supply = <&reg_vdd_arm>;
-};
-
-&ddrc {
-	operating-points-v2 = <&ddrc_opp_table>;
-
-	ddrc_opp_table: opp-table {
-		compatible = "operating-points-v2";
-
-		opp-25M {
-			opp-hz = /bits/ 64 <25000000>;
-		};
-
-		opp-100M {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-
-		opp-750M {
-			opp-hz = /bits/ 64 <750000000>;
-		};
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "mxicy,mx25r1635f", "jedec,spi-nor";
-		spi-max-frequency = <80000000>;
-		reg = <0>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pca9450: pmic@25 {
-		compatible = "nxp,pca9450a";
-		reg = <0x25>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-
-		regulators {
-			reg_vdd_soc: BUCK1 {
-				regulator-name = "buck1";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <850000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <3125>;
-				nxp,dvs-run-voltage = <850000>;
-				nxp,dvs-standby-voltage = <800000>;
-			};
-
-			reg_vdd_arm: BUCK2 {
-				regulator-name = "buck2";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <950000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <3125>;
-				nxp,dvs-run-voltage = <950000>;
-				nxp,dvs-standby-voltage = <850000>;
-			};
-
-			reg_vdd_dram: BUCK3 {
-				regulator-name = "buck3";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <950000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_vdd_3v3: BUCK4 {
-				regulator-name = "buck4";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_vdd_1v8: BUCK5 {
-				regulator-name = "buck5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_nvcc_dram: BUCK6 {
-				regulator-name = "buck6";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_nvcc_snvs: LDO1 {
-				regulator-name = "ldo1";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_vdd_snvs: LDO2 {
-				regulator-name = "ldo2";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_vdda: LDO3 {
-				regulator-name = "ldo3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_vdd_phy: LDO4 {
-				regulator-name = "ldo4";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_nvcc_sd: LDO5 {
-				regulator-name = "ldo5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-		};
-	};
-};
-
-&uart3 { /* console */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	vmmc-supply = <&reg_vdd_3v3>;
-	vqmmc-supply = <&reg_vdd_1v8>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
-			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
-			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
-			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x19
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x141
-			MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4		0x141
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140
-			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x190
-			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d0
-			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0
-			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0
-			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0
-			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0
-			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d0
-			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d0
-			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d0
-			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d0
-			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
-			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x190
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x194
-			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d4
-			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4
-			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4
-			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4
-			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4
-			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d4
-			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d4
-			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d4
-			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d4
-			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
-			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x194
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x196
-			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d6
-			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6
-			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6
-			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6
-			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6
-			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d6
-			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d6
-			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d6
-			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d6
-			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
-			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x196
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
-		>;
-	};
-};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
new file mode 100644
index 000000000000..96987910609f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
@@ -0,0 +1,891 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Kontron OSM-S i.MX8MM (N802X SOM)";
+	compatible = "kontron,imx8mm-osm-s", "fsl,imx8mm";
+
+	aliases {
+		rtc0 = &rv3028;
+		rtc1 = &snvs_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/*
+		 * There are multiple SoM flavors with different DDR sizes.
+		 * The smallest is 1GB. For larger sizes the bootloader will
+		 * update the reg property.
+		 */
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_vbus>;
+		enable-active-high;
+		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "VBUS_USB_A";
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_vbus>;
+		enable-active-high;
+		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "VBUS_USB_B";
+	};
+
+	reg_usdhc2_vcc: regulator-usdhc2-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vcc>;
+		enable-active-high;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VCC_SDIO_A";
+	};
+
+	reg_usdhc3_vcc: regulator-usdhc3-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc3_vcc>;
+		enable-active-high;
+		gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VCC_SDIO_B";
+	};
+
+	reg_vdd_carrier: regulator-vdd-carrier {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "VDD_CARRIER";
+
+		regulator-state-standby {
+			regulator-on-in-suspend;
+		};
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+
+		regulator-state-disk {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25r1635f", "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x1e0000>;
+			};
+
+			partition@1e0000 {
+				label = "env";
+				reg = <0x1e0000 0x10000>;
+			};
+
+			partition@1f0000 {
+				label = "env_redundant";
+				reg = <0x1f0000 0x10000>;
+			};
+		};
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_ecspi2_gpio>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+	gpio-line-names = "", "GPIO_A_0", "", "GPIO_A_1",
+			  "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4",
+			  "GPIO_A_5", "GPIO_A_6", "GPIO_A_7", "GPIO_B_0",
+			  "GPIO_B_1", "USB_A_OC#", "CAM_MCK", "USB_B_OC#",
+			  "ETH_MDC", "ETH_MDIO", "ETH_A_(S)(R)(G)MII_TXD3",
+			  "ETH_A_(S)(R)(G)MII_TXD2", "ETH_A_(S)(R)(G)MII_TXD1",
+			  "ETH_A_(S)(R)(G)MII_TXD0", "ETH_A_(R)(G)MII_TX_EN(_ER)",
+			  "ETH_A_(R)(G)MII_TX_CLK", "ETH_A_(R)(G)MII_RX_DV(_ER)",
+			  "ETH_A_(R)(G)MII_RX_CLK", "ETH_A_(S)(R)(G)MII_RXD0",
+			  "ETH_A_(S)(R)(G)MII_RXD1", "ETH_A_(R)(G)MII_RXD2",
+			  "ETH_A_(R)(G)MII_RXD3";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SDIO_A_CD#", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0",
+			  "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "SDIO_A_PWR_EN",
+			  "SDIO_A_WP";
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3>;
+	gpio-line-names = "GPIO_C_5", "GPIO_C_4", "SDIO_B_CD#", "SDIO_B_D5",
+			  "SDIO_B_D6", "SDIO_B_D7", "GPIO_C_0", "GPIO_C_1",
+			  "GPIO_C_2", "GPIO_C_3", "SDIO_B_D0", "SDIO_B_D1",
+			  "SDIO_B_D2", "SDIO_B_D3", "", "SDIO_B_D4",
+			  "CARRIER_PWR_EN", "SDIO_B_CLK", "SDIO_B_CMD", "GPIO_B_2",
+			  "USB_B_EN", "GPIO_B_3", "PCIe_CLKREQ#", "PCIe_A_PERST#",
+			  "PCIe_WAKE#", "USB_A_EN";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+	gpio-line-names = "GPIO_C_7", "", "I2S_A_DATA_IN", "I2S_B_DATA_IN",
+			  "GPIO_B_4", "BOOT_SEL0#", "BOOT_SEL1#", "",
+			  "", "", "I2S_LRCLK", "I2S_BITCLK",
+			  "I2S_A_DATA_OUT", "I2S_B_DATA_OUT", "GPIO_B_5", "GPIO_B_6",
+			  "GPIO_B_7", "SPI_A_/WP_(IO2)", "SPI_A_/HOLD_(IO3)", "GPIO_C_6",
+			  "I2S_MCLK", "UART_A_TX", "UART_A_RX", "UART_A_CTS",
+			  "UART_A_RTS", "", "", "",
+			  "PCIe_SM_ALERT", "UART_B_RTS", "UART_B_CTS", "UART_B_RX";
+};
+
+&gpio5 {
+	gpio-line-names = "UART_B_TX", "SDIO_B_PWR_EN", "SDIO_B_WP", "PWM_2",
+			  "PWM_1", "PWM_0", "", "",
+			  "", "", "SPI_A_SCK", "SPI_A_SDO_(IO1)",
+			  "SPI_A_SCK", "SPI_A_CS0#", "", "",
+			  "I2C_A_SCL", "I2C_A_SDA", "I2C_B_SCL", "I2C_B_SDA",
+			  "PCIe_SMCLK", "PCIe_SMDAT", "SPI_B_SCK", "SPI_B_SDO",
+			  "SPI_B_SDI", "SPI_B_CS0#", "UART_CON_RX", "UART_CON_TX",
+			  "UART_C_RX", "UART_C_TX";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				regulator-name = "+0V8_VDD_SOC (BUCK1)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <850000>;
+				nxp,dvs-standby-voltage = <800000>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-name = "+0V9_VDD_ARM (BUCK2)";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_vdd_dram: BUCK3 {
+				regulator-name = "+0V9_VDD_DRAM&PU (BUCK3)";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-name = "+3V3 (BUCK4)";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-name = "+1V8 (BUCK5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_dram: BUCK6 {
+				regulator-name = "+1V1_NVCC_DRAM (BUCK6)";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_snvs: LDO1 {
+				regulator-name = "+1V8_NVCC_SNVS (LDO1)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_snvs: LDO2 {
+				regulator-name = "+0V8_VDD_SNVS (LDO2)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdda: LDO3 {
+				regulator-name = "+1V8_VDDA (LDO3)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_phy: LDO4 {
+				regulator-name = "+0V9_VDD_PHY (LDO4)";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_sd: LDO5 {
+				regulator-name = "NVCC_SD (LDO5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		address-width = <16>;
+		pagesize = <32>;
+		size = <8192>;
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&uart3 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	vbus-supply = <&reg_usb1_vbus>;
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb2>;
+	vbus-supply = <&reg_usb2_vbus>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_usdhc2_vcc>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_gpio>;
+	vmmc-supply = <&reg_usdhc3_vcc>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_csi_mck: csimckgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59 /* CAM_MCK */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x19
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82 /* SPI_A_SDI_(IO0) */
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82 /* SPI_A_SDO_(IO1) */
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82 /* SPI_A_SCK */
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19 /* SPI_A_CS0# */
+		>;
+	};
+
+	pinctrl_ecspi2_gpio: ecspi2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17		0x19 /* SPI_A_/WP_(IO2) */
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x19 /* SPI_A_/HOLD_(IO3) */
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x82 /* SPI_B_SDI */
+			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x82 /* SPI_B_SDO */
+			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x82 /* SPI_B_SCK */
+			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19 /* SPI_B_CS0# */
+		>;
+	};
+
+	pinctrl_enet_rgmii: enetrgmiigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x03 /* ETH_MDC */
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x03 /* ETH_MDIO */
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f /* ETH_A_(S)(R)(G)MII_TXD3 */
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f /* ETH_A_(S)(R)(G)MII_TXD2 */
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f /* ETH_A_(S)(R)(G)MII_TXD1 */
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f /* ETH_A_(S)(R)(G)MII_TXD0 */
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91 /* ETH_A_(R)(G)MII_RXD3 */
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91 /* ETH_A_(R)(G)MII_RXD2 */
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91 /* ETH_A_(S)(R)(G)MII_RXD1 */
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91 /* ETH_A_(S)(R)(G)MII_RXD0 */
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f /* ETH_A_(R)(G)MII_TX_CLK */
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91 /* ETH_A_(R)(G)MII_RX_CLK */
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91 /* ETH_A_(R)(G)MII_RX_DV(_ER) */
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f /* ETH_A_(R)(G)MII_TX_EN(_ER) */
+		>;
+	};
+
+	pinctrl_enet_rmii: enetrmiigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x03 /* ETH_MDC */
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x03 /* ETH_MDIO */
+			MX8MM_IOMUXC_ENET_TD2_ENET1_TX_CLK		0x4000001f /* ETH_A_(S)(R)(G)MII_TXD2 */
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x56 /* ETH_A_(S)(R)(G)MII_TXD1 */
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x56 /* ETH_A_(S)(R)(G)MII_TXD0 */
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x56 /* ETH_A_(S)(R)(G)MII_RXD1 */
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x56 /* ETH_A_(S)(R)(G)MII_RXD0 */
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RX_ER		0x56 /* ETH_A_(R)(G)MII_RX_CLK */
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x56 /* ETH_A_(R)(G)MII_RX_DV(_ER) */
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x56 /* ETH_A_(R)(G)MII_TX_EN(_ER) */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19 /* GPIO_A_0 */
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19 /* GPIO_A_1 */
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x19 /* GPIO_A_2 */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19 /* GPIO_A_3 */
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19 /* GPIO_A_4 */
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x19 /* GPIO_A_5 */
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19 /* GPIO_A_6 */
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19 /* GPIO_A_7 */
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19 /* GPIO_B_0 */
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x19 /* GPIO_B_1 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0			0x19 /* GPIO_C_5 */
+			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1		0x19 /* GPIO_C_4 */
+			MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6		0x19 /* GPIO_C_0 */
+			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7		0x19 /* GPIO_C_1 */
+			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8		0x19 /* GPIO_C_2 */
+			MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9		0x19 /* GPIO_C_3 */
+			MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x19 /* GPIO_B_2 */
+			MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21		0x19 /* GPIO_B_3 */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x19 /* GPIO_C_7 */
+			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4		0x19 /* GPIO_B_4 */
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5		0x19 /* BOOT_SEL0# */
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6		0x19 /* BOOT_SEL1# */
+			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14		0x19 /* GPIO_B_5 */
+			MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15		0x19 /* GPIO_B_6 */
+			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16		0x19 /* GPIO_B_7 */
+			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x19 /* GPIO_C_6 */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000083
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000083
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x40000083 /* I2C_A_SCL */
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x40000083 /* I2C_A_SDA */
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x40000083 /* I2C_B_SCL */
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x40000083 /* I2C_B_SDA */
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083 /* PCIe_SMCLK and I2C_CAM_SCL/CSI_TX_P */
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083 /* PCIe_SMDAT and I2C_CAM_SDA/CSI_TX_N */
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22		0x19 /* PCIe_CLKREQ# */
+			MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23		0x19 /* PCIe_A_PERST# */
+			MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24		0x19 /* PCIe_WAKE# */
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19 /* PCIe_SM_ALERT */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x141
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT		0x19 /* PWM_0 */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x19 /* PWM_1 */
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT			0x19 /* PWM_2 */
+		>;
+	};
+
+	pinctrl_reg_usb1_vbus: regusb1vbusgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x19 /* USB_A_EN */
+		>;
+	};
+
+	pinctrl_reg_usb2_vbus: regusb2vbusgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x19 /* USB_B_EN */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vcc: regusdhc2vccgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x19 /* SDIO_A_PWR_EN */
+		>;
+	};
+
+	pinctrl_reg_usdhc3_vcc: regusdhc3vccgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1			0x19 /* SDIO_B_PWR_EN */
+		>;
+	};
+
+	pinctrl_reg_vdd_carrier: regvddcarriergrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x19 /* CARRIER_PWR_EN */
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1			0x19
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0		0xd6 /* I2S_A_DATA_IN */
+			MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0		0xd6 /* I2S_A_DATA_OUT */
+			MX8MM_IOMUXC_SAI1_RXD1_SAI1_RX_DATA1		0xd6 /* I2S_B_DATA_IN */
+			MX8MM_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1		0xd6 /* I2S_B_DATA_OUT */
+			MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK		0xd6 /* I2S_MCLK */
+			MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC		0xd6 /* I2S_LRCLK */
+			MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK		0xd6 /* I2S_BITCLK */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0 /* UART_A_RX */
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0 /* UART_A_TX */
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0 /* UART_A_CTS */
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0 /* UART_A_RTS */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0 /* UART_B_RX */
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0 /* UART_B_TX */
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0 /* UART_B_CTS */
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0 /* UART_B_RTS */
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140 /* UART_CON_RX */
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140 /* UART_CON_TX */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x0 /* UART_C_RX */
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x0 /* UART_C_TX */
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x19 /* USB_A_OC# */
+		>;
+	};
+
+	pinctrl_usb2: usb2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC		0x19 /* USB_B_OC# */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d0
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d4
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d6
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x196
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90 /* SDIO_A_CLK */
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0 /* SDIO_A_CMD */
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0 /* SDIO_A_D0 */
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0 /* SDIO_A_D1 */
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0 /* SDIO_A_D2 */
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0 /* SDIO_A_D3 */
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000090
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94 /* SDIO_A_CLK */
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4 /* SDIO_A_CMD */
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4 /* SDIO_A_D0 */
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4 /* SDIO_A_D1 */
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4 /* SDIO_A_D2 */
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4 /* SDIO_A_D3 */
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000090
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96 /* SDIO_A_CLK */
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6 /* SDIO_A_CMD */
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6 /* SDIO_A_D0 */
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6 /* SDIO_A_D1 */
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6 /* SDIO_A_D2 */
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6 /* SDIO_A_D3 */
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000090
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19 /* SDIO_A_CD# */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x90 /* SDIO_B_CLK */
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x90 /* SDIO_B_CMD */
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x90 /* SDIO_B_D0 */
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x90 /* SDIO_B_D1 */
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x90 /* SDIO_B_D2 */
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x90 /* SDIO_B_D3 */
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x90 /* SDIO_B_D4 */
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x90 /* SDIO_B_D5 */
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x90 /* SDIO_B_D6 */
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x90 /* SDIO_B_D7 */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x94 /* SDIO_B_CLK */
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x94 /* SDIO_B_CMD */
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x94 /* SDIO_B_D0 */
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x94 /* SDIO_B_D1 */
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x94 /* SDIO_B_D2 */
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x94 /* SDIO_B_D3 */
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x94 /* SDIO_B_D4 */
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x94 /* SDIO_B_D5 */
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x94 /* SDIO_B_D6 */
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x94 /* SDIO_B_D7 */
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x96 /* SDIO_B_CLK */
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x96 /* SDIO_B_CMD */
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x96 /* SDIO_B_D0 */
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x96 /* SDIO_B_D1 */
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x96 /* SDIO_B_D2 */
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x96 /* SDIO_B_D3 */
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x96 /* SDIO_B_D4 */
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x96 /* SDIO_B_D5 */
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x96 /* SDIO_B_D6 */
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x96 /* SDIO_B_D7 */
+		>;
+	};
+
+	pinctrl_usdhc3_gpio: usdhc3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19 /* SDIO_B_CD# */
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19 /* SDIO_B_WP */
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
new file mode 100644
index 000000000000..2076148e0862
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2019 Kontron Electronics GmbH
+ */
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Kontron SL i.MX8MM (N801X SOM)";
+	compatible = "kontron,imx8mm-sl", "fsl,imx8mm";
+
+	memory@40000000 {
+		device_type = "memory";
+		/*
+		 * There are multiple SoM flavors with different DDR sizes.
+		 * The smallest is 1GB. For larger sizes the bootloader will
+		 * update the reg property.
+		 */
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25r1635f", "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x1e0000>;
+			};
+
+			partition@1e0000 {
+				label = "env";
+				reg = <0x1e0000 0x10000>;
+			};
+
+			partition@1f0000 {
+				label = "env_redundant";
+				reg = <0x1f0000 0x10000>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				regulator-name = "+0V8_VDD_SOC (BUCK1)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <850000>;
+				nxp,dvs-standby-voltage = <800000>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-name = "+0V9_VDD_ARM (BUCK2)";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_vdd_dram: BUCK3 {
+				regulator-name = "+0V9_VDD_DRAM&PU (BUCK3)";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-name = "+3V3 (BUCK4)";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-name = "+1V8 (BUCK5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_dram: BUCK6 {
+				regulator-name = "+1V1_NVCC_DRAM (BUCK6)";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_snvs: LDO1 {
+				regulator-name = "+1V8_NVCC_SNVS (LDO1)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_snvs: LDO2 {
+				regulator-name = "+0V8_VDD_SNVS (LDO2)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdda: LDO3 {
+				regulator-name = "+1V8_VDDA (LDO3)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_phy: LDO4 {
+				regulator-name = "+0V9_VDD_PHY (LDO4)";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_sd: LDO5 {
+				regulator-name = "NVCC_SD (LDO5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&uart3 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000083
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000083
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x141
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d0
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d4
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d6
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
index c97f4e06ae5f..0b123a84018b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
@@ -10,6 +10,7 @@
 / {
 	model = "MENLO MX8MM EMBEDDED DEVICE";
 	compatible = "menlo,mx8menlo",
+		     "toradex,verdin-imx8mm-nonwifi",
 		     "toradex,verdin-imx8mm",
 		     "fsl,imx8mm";
 
@@ -152,11 +153,11 @@
 	 * CPLD_reset is RESET_SOFT in schematic
 	 */
 	gpio-line-names =
-		"CPLD_D[1]", "CPLD_int", "CPLD_reset", "",
-		"", "CPLD_D[0]", "", "",
-		"", "", "", "CPLD_D[2]",
-		"CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]", "CPLD_D[6]",
-		"CPLD_D[7]", "", "", "",
+		"CPLD_D[6]", "CPLD_int", "CPLD_reset", "",
+		"", "CPLD_D[7]", "", "",
+		"", "", "", "CPLD_D[5]",
+		"CPLD_D[4]", "CPLD_D[3]", "CPLD_D[2]", "CPLD_D[1]",
+		"CPLD_D[0]", "", "", "",
 		"", "", "", "",
 		"", "", "", "KBD_intK",
 		"", "", "", "";
@@ -250,21 +251,21 @@
 		/* SODIMM 96 */
 		MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4			0x1c4
 		/* CPLD_D[7] */
-		MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5			0x1c4
+		MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5			0x184
 		/* CPLD_D[6] */
-		MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0			0x1c4
+		MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0			0x184
 		/* CPLD_D[5] */
-		MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11			0x1c4
+		MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11			0x184
 		/* CPLD_D[4] */
-		MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12			0x184
 		/* CPLD_D[3] */
-		MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13			0x184
 		/* CPLD_D[2] */
-		MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14			0x184
 		/* CPLD_D[1] */
-		MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15			0x184
 		/* CPLD_D[0] */
-		MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16			0x184
 		/* KBD_intK */
 		MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27			0x1c4
 		/* DISP_reset */
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
index 74c09891600f..12fb79d20b29 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -214,13 +214,13 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	i2cmux@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9540";
 		reg = <0x70>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		i2c3@0 {
+		i2c@0 {
 			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -247,7 +247,7 @@
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		clocks = <&clk IMX8MM_CLK_SAI1_ROOT>;
-		clock-names = "mclk1";
+		clock-names = "mclk";
 		wlf,shared-lrclk;
 		#sound-dai-cells = <0>;
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi
new file mode 100644
index 000000000000..b31436b5e9b7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&gpu_2d {
+	assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
+			  <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-rates = <0>, <1000000000>;
+};
+
+&gpu_3d {
+	assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
+			  <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-rates = <0>, <1000000000>;
+};
+
+&vpu_blk_ctrl {
+	assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
+			  <&clk IMX8MM_CLK_VPU_G2>,
+			  <&clk IMX8MM_CLK_VPU_H1>,
+			  <&clk IMX8MM_VPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>,
+				 <&clk IMX8MM_VPU_PLL_OUT>,
+				 <&clk IMX8MM_SYS_PLL3_OUT>;
+	assigned-clock-rates = <750000000>,
+			       <700000000>,
+			       <750000000>,
+			       <700000000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phg.dts b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
new file mode 100644
index 000000000000..a134b1833649
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Fabio Estevam <festevam@denx.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mm-tqma8mqml.dtsi"
+
+/ {
+	model = "Cloos i.MX8MM PHG board";
+	compatible = "cloos,imx8mm-phg", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+		pinctrl-0 = <&pinctrl_beeper>;
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			label = "status1";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "status2";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "status3";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "run";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			label = "powerled";
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_otg_vbus_ctrl>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+
+	panel {
+		compatible = "auo,g084sn05", "panel-lvds";
+		width-mm = <170>;
+		height-mm = <28>;
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <49500000>;
+			hactive = <800>;
+			hback-porch = <48>;
+			hfront-porch = <312>;
+			hsync-len = <40>;
+			vactive = <600>;
+			vback-porch = <19>;
+			vfront-porch = <61>;
+			vsync-len = <20>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			panel_out_bridge: endpoint {
+				remote-endpoint = <&bridge_out_panel>;
+			};
+		};
+	};
+};
+
+/* QSPI is not populated on the SoM */
+&flexspi {
+	status = "disabled";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			compatible = "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	bridge@2c {
+		compatible = "ti,sn65dsi83";
+		reg = <0x2c>;
+		enable-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dsi_bridge>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_in_dsi: endpoint {
+					remote-endpoint = <&dsi_out_bridge>;
+					data-lanes = <1 2 3 4>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				bridge_out_panel: endpoint {
+					remote-endpoint = <&panel_out_bridge>;
+				};
+			};
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out_bridge: endpoint {
+				data-lanes = <1 2>;
+				lane-polarities = <1 0 0 0 0>;
+				remote-endpoint = <&bridge_in_dsi>;
+			};
+		};
+	};
+};
+
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbphynop1 {
+	power-domains = <&pgc_otg1>;
+};
+
+&usbphynop2 {
+	power-domains = <&pgc_otg2>;
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_400M>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_beeper: beepergrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x19
+		>;
+	};
+
+	pinctrl_dsi_bridge: dsibridgeggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3		0x19
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x19
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x40000002
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x40000002
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x14
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x14
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x14
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x14
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x90
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x90
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x90
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x90
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x14
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x90
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x14
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22		0x10
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_otg_vbus_ctrl: otgvbusctrlgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2		0x119
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso
new file mode 100644
index 000000000000..79e4c3710ac3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mm-pinfunc.h"
+
+&{/} {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd>;
+		default-brightness-level = <6>;
+		pwms = <&pwm4 0 50000 0>;
+		power-supply = <&reg_vdd_3v3_s>;
+		enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+	};
+
+	panel {
+		compatible = "edt,etml1010g3dra";
+		backlight = <&backlight>;
+		power-supply = <&reg_vcc_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+
+	reg_sound_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8_Audio";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_sound_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_Analog";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound-peb-av-10 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "snd-peb-av-10";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,mclk-fs = <32>;
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Speaker", "Speaker",
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Speaker", "SPOP",
+			"Speaker", "SPOM",
+			"Headphone Jack", "HPLOUT",
+			"Headphone Jack", "HPROUT",
+			"LINE1L", "Line In",
+			"LINE1R", "Line In",
+			"MIC3R", "Microphone Jack",
+			"Microphone Jack", "Mic Bias";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai5>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clk IMX8MM_CLK_SAI5>;
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	codec: codec@18 {
+		compatible = "ti,tlv320aic3007";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tlv320>;
+		#sound-dai-cells = <0>;
+		reg = <0x18>;
+		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+		ai3x-gpio-func = <0xd 0x0>;
+		ai3x-micbias-vg = <2>;
+		AVDD-supply = <&reg_sound_3v3>;
+		IOVDD-supply = <&reg_sound_3v3>;
+		DRVDD-supply = <&reg_sound_3v3>;
+		DVDD-supply = <&reg_sound_1v8>;
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x57>;
+		vcc-supply = <&reg_vdd_3v3_s>;
+	};
+
+	eeprom@5f {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x5f>;
+		size = <32>;
+		vcc-supply = <&reg_vdd_3v3_s>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&sai5 {
+	assigned-clocks = <&clk IMX8MM_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL2_OUT>;
+	assigned-clock-rates = <11289600>;
+	clocks = <&clk IMX8MM_CLK_SAI5_IPG>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_SAI5_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
+		<&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k",
+			"pll11k";
+	fsl,sai-mclk-direction-output;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&sn65dsi83 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			bridge_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+			bridge_out: endpoint {
+				remote-endpoint = <&panel_in>;
+				ti,lvds-vod-swing-clock-microvolt = <200000 600000>;
+				ti,lvds-vod-swing-data-microvolt = <200000 600000>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL          0x400001c2
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA          0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18        0x1e2
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19        0x1e2
+		>;
+	};
+	pinctrl_lcd: lcd0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1		0x12
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT		0x12
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK        0xd6
+			MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0    0xd6
+			MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK     0xd6
+			MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0    0xd6
+		>;
+	};
+
+	pinctrl_tlv320: tlv320grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28       0x16
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20        0x16
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-eval-01.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-eval-01.dtso
new file mode 100644
index 000000000000..a28f51ece93b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-eval-01.dtso
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Janine Hagemann <j.hagemann@phytec.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include "imx8mm-pinfunc.h"
+
+&{/} {
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		button-0 {
+			label = "home";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-1 {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>;
+
+		user-led1 {
+			gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		user-led2 {
+			gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		user-led3 {
+			gpios = <&gpio5 28 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17	0x16
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x16
+		>;
+	};
+
+	pinctrl_user_leds: user_ledsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15	0x16
+			MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28	0x16
+			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14	0x16
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
index 4a3df2b77b0b..be470cfb03d7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
@@ -140,8 +140,28 @@
 	};
 };
 
+/* TPM */
+&ecspi2 {
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	tpm: tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		reg = <0>;
+		spi-max-frequency = <43000000>;
+	};
+};
+
 &gpio1 {
-	gpio-line-names = "nINT_ETHPHY", "LED_RED", "WDOG_INT", "X_RTC_INT",
+	gpio-line-names = "", "LED_RED", "WDOG_INT", "X_RTC_INT",
 		"", "", "", "RESET_ETHPHY",
 		"CAN_nINT", "CAN_EN", "nENABLE_FLATLINK", "",
 		"USB_OTG_VBUS_EN", "", "LED_GREEN", "LED_BLUE";
@@ -168,6 +188,15 @@
 		"", "ECSPI1_SS0";
 };
 
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
 /* PCIe */
 &pcie0 {
 	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
@@ -175,9 +204,6 @@
 	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
 				 <&clk IMX8MM_SYS_PLL2_250M>;
 	assigned-clock-rates = <10000000>, <250000000>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
-		 <&clk IMX8MM_CLK_PCIE1_PHY>;
-	clock-names = "pcie", "pcie_aux", "pcie_bus";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
 	reset-gpio = <&gpio4 9 GPIO_ACTIVE_LOW>;
@@ -193,8 +219,15 @@
 	status = "okay";
 };
 
+/* RTC */
 &rv3028 {
+	interrupt-parent = <&gpio1>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	pinctrl-0 = <&pinctrl_rtc>;
+	pinctrl-names = "default";
+	aux-voltage-chargeable = <1>;
 	trickle-resistor-ohms = <3000>;
+	wakeup-source;
 };
 
 &snvs_pwrkey {
@@ -228,11 +261,12 @@
 		device-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 		interrupt-names = "host-wakeup";
 		interrupt-parent = <&gpio2>;
-		interrupts = <9 IRQ_TYPE_EDGE_BOTH>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 		max-speed = <2000000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_bt>;
 		shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&reg_vcc_3v3>;
 		vddio-supply = <&reg_vcc_3v3>;
 	};
 };
@@ -305,7 +339,7 @@
 		fsl,pins = <
 			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x00
 			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x00
-			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9	0x00
+			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9	0x140
 		>;
 	};
 
@@ -330,12 +364,35 @@
 		>;
 	};
 
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO    0x80
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI    0x80
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK    0x80
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13      0x00
+		>;
+	};
+
 	pinctrl_fan: fan0grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8	0x16
 		>;
 	};
 
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c2
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20        0x1e2
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21        0x1e2
+		>;
+	};
+
 	pinctrl_leds: leds1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x16
@@ -358,6 +415,18 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x1c0
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11      0x140
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX	0x00
@@ -378,8 +447,8 @@
 
 	pinctrl_uart3: uart3grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x40
-			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x40
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-no-eth.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phycore-no-eth.dtso
new file mode 100644
index 000000000000..0fb4b6da6c10
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-no-eth.dtso
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&ethphy0 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-no-spiflash.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phycore-no-spiflash.dtso
new file mode 100644
index 000000000000..7bfc366c1689
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-no-spiflash.dtso
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&flexspi {
+	status = "disabled";
+};
+
+&som_flash {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-rpmsg.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phycore-rpmsg.dtso
new file mode 100644
index 000000000000..43d5905f3d72
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-rpmsg.dtso
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Dominik Haller <d.haller@phytec.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+
+&{/} {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		m4_reserved: m4@80000000 {
+			reg = <0 0x80000000 0 0x1000000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@b8000000 {
+			reg = <0 0xb8000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@b8008000 {
+			reg = <0 0xb8008000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: rsc_table@b80ff000 {
+			reg = <0 0xb80ff000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@b8400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xb8400000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	core-m4 {
+		compatible = "fsl,imx8mm-cm4";
+		clocks = <&clk IMX8MM_CLK_M4_DIV>;
+		mboxes = <&mu 0 1
+			&mu 1 1
+			&mu 3 1>;
+		mbox-names = "tx", "rx", "rxdb";
+		memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>, <&rsc_table>;
+		syscon = <&src>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
index 995b44efb1b6..921a7f58fd41 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
@@ -53,15 +53,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -69,7 +69,6 @@
 
 /* Ethernet */
 &fec1 {
-	fsl,magic-packet;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	pinctrl-names = "default";
@@ -102,6 +101,8 @@
 	status = "okay";
 
 	som_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <80000000>;
@@ -111,7 +112,7 @@
 };
 
 &gpio1 {
-	gpio-line-names = "nINT_ETHPHY", "", "WDOG_INT", "X_RTC_INT",
+	gpio-line-names = "", "", "WDOG_INT", "X_RTC_INT",
 		"", "", "", "RESET_ETHPHY",
 		"", "", "nENABLE_FLATLINK";
 };
@@ -149,7 +150,6 @@
 				regulator-max-microvolt = <3300000>;
 				regulator-min-microvolt = <1800000>;
 				regulator-name = "NVCC_SD2 (LDO2)";
-				vselect-en;
 
 				regulator-state-mem {
 					regulator-off-in-suspend;
@@ -160,11 +160,13 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-max-microvolt = <2500000>;
-				regulator-min-microvolt = <1500000>;
+				regulator-min-microvolt = <2500000>;
 				regulator-name = "VCC_ENET_2V5 (LDO3)";
 
 				regulator-state-mem {
-					regulator-off-in-suspend;
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <2500000>;
+					regulator-suspend-min-microvolt = <2500000>;
 				};
 			};
 
@@ -210,7 +212,7 @@
 				};
 			};
 
-			reg_vdd_gpu: buck3 {
+			reg_vdd_vpu: buck3 {
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-max-microvolt = <1000000>;
@@ -284,9 +286,11 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sn65dsi83>;
 		reg = <0x2d>;
+		vcc-supply = <&reg_vdd_1v8>;
 		status = "disabled";
 	};
 
+	/* EEPROM */
 	eeprom@51 {
 		compatible = "atmel,24c32";
 		pagesize = <32>;
@@ -294,17 +298,14 @@
 		vcc-supply = <&reg_vdd_3v3_s>;
 	};
 
+	/* RTC */
 	rv3028: rtc@52 {
 		compatible = "microcrystal,rv3028";
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc>;
 		reg = <0x52>;
 	};
 };
 
-/* EMMC */
+/* eMMC */
 &usdhc3 {
 	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
 	assigned-clock-rates = <400000000>;
@@ -339,10 +340,10 @@
 			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90
 			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x16
 			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x16
-			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x16
-			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x16
-			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x16
-			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x16
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x12
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x12
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x12
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x12
 			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x10
 		>;
 	};
@@ -372,12 +373,6 @@
 		>;
 	};
 
-	pinctrl_rtc: rtcgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x1c0
-		>;
-	};
-
 	pinctrl_sn65dsi83: sn65dsi83grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x0
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
new file mode 100644
index 000000000000..78f4e8d5814d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Jens Lang <j.lang@phytec.de>
+ *
+ * Tauri-L 2 x RS232:
+ *  - GPIO3_20 uart4_rs485_en needs to be driven low (inactive)
+ */
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3_hog>;
+
+	uart4-rs485-en-hog {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "uart4_rs485_en";
+	};
+};
+
+/* UART2 - RS232  */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+/* UART4 - RS232  */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio3_hog: gpio3hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20	0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x00
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x00
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x49
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x49
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
new file mode 100644
index 000000000000..66288948bdd3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Jens Lang <j.lang@phytec.de>
+ *
+ * Tauri-L RS232 + RS485:
+ *  - GPIO3_20 uart4_rs485_en needs to be driven high (active)
+ *  - GPIO3_25 RS485_DE Driver enable
+ */
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3_hog>;
+
+	uart4-rs485-en-hog {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "uart4_rs485_en";
+	};
+};
+
+/* UART2 - RS232  */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+/* UART4 - RS485  */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	rts-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio3_hog: gpio3hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20	0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x00
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x00
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x49
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x49
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25	0x49
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rts-cts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rts-cts.dtso
new file mode 100644
index 000000000000..4719f5fbad03
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rts-cts.dtso
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Author: Jens Lang <j.lang@phytec.de>
+ *
+ * Tauri-L RS232 with RTS/CTS hardware flow control:
+ *  - UART4_TX becomes RTS
+ *  - UART4_RX becomes CTS
+ */
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x00
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x00
+			MX8MM_IOMUXC_UART4_RXD_UART2_DCE_CTS_B	0x00
+			MX8MM_IOMUXC_UART4_TXD_UART2_DCE_RTS_B	0x00
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
new file mode 100644
index 000000000000..755cf9cacd22
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
@@ -0,0 +1,511 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mm-phycore-som.dtsi"
+
+/ {
+	model = "PHYTEC phyGATE-Tauri-L-iMX8MM";
+	compatible = "phytec,imx8mm-phygate-tauri-l",
+		     "phytec,imx8mm-phycore-som", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	can_osc_40m: clock-can {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		clock-output-names = "can_osc_40m";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		key {
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			label = "KEY-A";
+			linux,code = <KEY_A>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-1 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+	};
+
+	usdhc1_pwrseq: pwr-seq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <60>;
+		reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_usb_hub_vbus: regulator-hub-otg1 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhubpwr>;
+		regulator-name = "usb_hub_vbus";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1pwr>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <20000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VSD_3V3";
+	};
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>,
+		   <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio5 2 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	/* CAN MCP251XFD */
+	can0: can@0 {
+		compatible = "microchip,mcp251xfd";
+		reg = <0>;
+		clocks = <&can_osc_40m>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_int>;
+		spi-max-frequency = <10000000>;
+	};
+
+	tpm: tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		reg = <1>;
+		spi-max-frequency = <38000000>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	temp_sense0: temperature-sensor@49 {
+		compatible = "ti,tmp102";
+		reg = <0x49>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tempsense>;
+		#thermal-sensor-cells = <1>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* PCIe */
+&pcie0 {
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_PHY>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_100M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	assigned-clock-rates = <10000000>, <100000000>, <250000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+/* RTC */
+&rv3028 {
+	interrupt-parent = <&gpio1>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	pinctrl-0 = <&pinctrl_rtc>;
+	pinctrl-names = "default";
+	aux-voltage-chargeable = <1>;
+	trickle-resistor-ohms = <3000>;
+	wakeup-source;
+};
+
+&uart1 {
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* UART2 - RS232 */
+&uart2 {
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* UART - console */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* USB */
+&usbotg1 {
+	adp-disable;
+	dr_mode = "otg";
+	over-current-active-low;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	srp-disable;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	vbus-supply = <&reg_usb_hub_vbus>;
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_nvcc_sd2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can_int: can-intgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x00
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x82
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x82
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1csgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x00
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x00
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x00
+		>;
+	};
+
+	pinctrl_gpiokeys: keygrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x00
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL	0x400001c2
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA	0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17		0x1e0
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16		0x1e0
+		>;
+	};
+
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL	0x400001c2
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA	0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19		0x1e0
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18		0x1e0
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL	0x400001c2
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA	0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21		0x1e0
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20		0x1e0
+		>;
+	};
+
+	pinctrl_leds: leds1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30	0x00
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x00
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* COEX2 */
+			MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x00
+			/* COEX1 */
+			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12	0x12
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT	0x40
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT		0x40
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_PWM4_OUT	0x40
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19     0x40
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x1c0
+		>;
+	};
+
+	pinctrl_tempsense: tempsensegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31	0x00
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x00
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x00
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x00
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x00
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usbhubpwr: usbhubpwrgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x00
+		>;
+	};
+
+	pinctrl_usbotg1pwr: usbotg1pwrgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x00
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x80
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x182
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0xc6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0xc6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0xc6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0xc6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0xc6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x40
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x192
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d2
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d2
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d2
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d2
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d2
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
index 83c8f715cd90..b1f11098d248 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
@@ -602,7 +602,7 @@
 #define MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22                                   0x234 0x49C 0x000 0x5 0x0
 #define MX8MM_IOMUXC_UART1_RXD_TPSMP_HDATA24                                0x234 0x49C 0x000 0x7 0x0
 #define MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX                                 0x238 0x4A0 0x000 0x0 0x0
-#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x0
+#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x1
 #define MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI                                  0x238 0x4A0 0x000 0x1 0x0
 #define MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23                                   0x238 0x4A0 0x000 0x5 0x0
 #define MX8MM_IOMUXC_UART1_TXD_TPSMP_HDATA25                                0x238 0x4A0 0x000 0x7 0x0
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts
index 9fbbbb556c0b..1eb1fe7ebde8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts
@@ -264,7 +264,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
 			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
@@ -280,7 +280,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
 			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtso b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtso
new file mode 100644
index 000000000000..e44249c6d8a0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtso
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&dsi_lvds_bridge {
+	status = "okay";
+};
+
+&expander0 {
+	dsi-mux-oe-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "DSI_MUX_OE#";
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+       status = "okay";
+};
+
+&panel {
+	compatible = "tianma,tm070jvhg33";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
index 286d2df01cfa..b941c8c4f7bb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
@@ -6,12 +6,14 @@
 /dts-v1/;
 
 #include <dt-bindings/phy/phy-imx8-pcie.h>
+
 #include "imx8mm-tqma8mqml.dtsi"
 #include "mba8mx.dtsi"
 
 / {
 	model = "TQ-Systems GmbH i.MX8MM TQMa8MxML on MBa8Mx";
 	compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+	chassis-type = "embedded";
 
 	aliases {
 		eeprom0 = &eeprom3;
@@ -35,11 +37,25 @@
 		off-on-delay-us = <12000>;
 	};
 
-	extcon_usbotg1: extcon-usbotg1 {
-		compatible = "linux,extcon-usb-gpio";
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X19";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb1_extcon>;
-		id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pinctrl_usb1_connector>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				usb_dr_connector: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
+		};
 	};
 };
 
@@ -59,21 +75,29 @@
 	};
 };
 
+&mipi_dsi {
+	samsung,burst-clock-frequency = <891000000>;
+	samsung,esc-clock-frequency = <20000000>;
+};
+
 &pcie_phy {
-	clocks = <&pcie0_refclk>;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcieclk 2>;
+	clock-names = "ref";
 	status = "okay";
 };
 
+/* PCIe slot on X36 */
 &pcie0 {
 	reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
-		<&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcieclk 3>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
 	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
-				<&clk IMX8MM_CLK_PCIE1_CTRL>;
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
 	assigned-clock-rates = <10000000>, <250000000>;
 	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
-				<&clk IMX8MM_SYS_PLL2_250M>;
+				 <&clk IMX8MM_SYS_PLL2_250M>;
 	status = "okay";
 };
 
@@ -106,13 +130,19 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg1>;
 	dr_mode = "otg";
-	extcon = <&extcon_usbotg1>;
 	srp-disable;
 	hnp-disable;
 	adp-disable;
 	power-active-high;
 	over-current-active-low;
+	usb-role-switch;
 	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
 };
 
 &usbotg2 {
@@ -232,7 +262,7 @@
 			   <MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>;
 	};
 
-	pinctrl_usb1_extcon: usb1-extcongrp {
+	pinctrl_usb1_connector: usb1-connectorgrp {
 		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x1c0>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
index 16ee9b5179e6..b82e9790ea20 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
@@ -3,6 +3,7 @@
  * Copyright 2020-2021 TQ-Systems GmbH
  */
 
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include "imx8mm.dtsi"
 
 / {
@@ -61,11 +62,16 @@
 	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <84000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+		vcc-supply = <&buck5_reg>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
@@ -78,7 +84,6 @@
 };
 
 &i2c1 {
-	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
@@ -86,8 +91,8 @@
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	sensor0: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 
@@ -218,15 +223,22 @@
 		read-only;
 		reg = <0x53>;
 		pagesize = <16>;
+		vcc-supply = <&reg_vcc3v3>;
 	};
 
 	eeprom0: eeprom@57 {
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
 	};
 };
 
+&mipi_dsi {
+	vddcore-supply = <&ldo4_reg>;
+	vddio-supply = <&ldo3_reg>;
+};
+
 &pcie_phy {
 	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
 	fsl,clkreq-unsupported;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-ucm-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-ucm-som.dtsi
new file mode 100644
index 000000000000..d3b21203c5f4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-ucm-som.dtsi
@@ -0,0 +1,679 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2018 CompuLab
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+		mmc0 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 3000000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <222>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		heartbeat-led {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	pmic_osc: clock-pmic {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic_osc";
+	};
+
+	wlreg_on: regulator-wlreg-on {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "wlreg_on";
+		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+
+	regulator-usdhc3rst {
+		compatible = "regulator-fixed";
+		regulator-name = "usdhc3_rst";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		enable-active-high;
+	};
+
+	regulator-fec1rst {
+		compatible = "regulator-fixed";
+		regulator-name = "fec1_rst";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		enable-active-high;
+		startup-delay-us = <500>;
+		regulator-boot-on;
+	};
+};
+
+&A53_0 {
+	arm-supply = <&buck2>;
+};
+
+&cpu_alert0 {
+	temperature = <105000>;
+};
+
+&cpu_crit0 {
+	temperature = <115000>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@4b {
+		reg = <0x4b>;
+		compatible = "rohm,bd71837";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		#clock-cells = <0>;
+		clocks = <&pmic_osc>;
+		clock-names = "osc";
+		clock-output-names = "pmic_clk";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck7: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck8: BUCK8 {
+				regulator-name = "buck8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo6: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo7: LDO7 {
+				regulator-name = "ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	rtc_i2c: rtc@69 {
+		compatible = "abracon,ab1805";
+		reg = <0x69>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_backlight>;
+	status = "okay";
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <49152000>;
+	clocks = <&clk IMX8MM_CLK_SAI2_IPG>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_SAI2_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
+		<&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&snvs {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "disabled";
+};
+
+&uart3 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 { /* bluetooth */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "disabled";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt>;
+		max-speed = <3000000>;
+		device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	hnp-disable;
+	srp-disable;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	bus-width = <4>;
+	non-removable;
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	no-1-8-v;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x190
+		>;
+	};
+
+	pinctrl_bt: bt0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6		0x19 /* BT_REG_ON */
+			MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7		0x19 /* BT_DEV_WU */
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8		0x19 /* BT_HST_WU */
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x41
+		>;
+	};
+
+	pinctrl_pwm_backlight: pwmbacklightgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_PWM2_OUT		0x03
+		>;
+	};
+
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK		0xd6
+			MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC		0xd6
+			MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC		0xd6
+			MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK		0xd6
+			MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0		0xd6
+			MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0		0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX		0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x49
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX		0x140
+			MX8MM_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B		0x140
+			MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX		0x140
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1grpgpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10		0x41
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0
+			MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4
+			MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6
+			MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x41
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x41
+			MX8MM_IOMUXC_SD2_WP_GPIO2_IO20			0x00
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
index d643381417f1..affbc67c2ef6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
@@ -117,7 +117,6 @@
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ptn5150>;
-		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
index a0bd540f27d3..190bde4edcd7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
@@ -8,7 +8,6 @@
 
 / {
 	model = "Variscite VAR-SOM-MX8MM module";
-	compatible = "variscite,var-som-mx8mm", "fsl,imx8mm";
 
 	chosen {
 		stdout-path = &uart4;
@@ -53,15 +52,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -142,7 +141,7 @@
 		rohm,reset-snvs-powered;
 
 		#clock-cells = <0>;
-		clocks = <&osc_32k 0>;
+		clocks = <&osc_32k>;
 		clock-output-names = "clk-32k-out";
 
 		regulators {
@@ -231,7 +230,6 @@
 			};
 
 			ldo5_reg: LDO5 {
-				regulator-compatible = "ldo5";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
@@ -308,7 +306,7 @@
 	keep-power-in-suspend;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
index 66a0d103c90f..37db4f0dd505 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
@@ -5,9 +5,15 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/net/ti-dp83867.h>
 
 / {
+	aliases {
+		rtc0 = &gsc_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
 	memory@40000000 {
 		device_type = "memory";
 		reg = <0x0 0x40000000 0 0x80000000>;
@@ -81,15 +87,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -113,14 +119,36 @@
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_AMBER>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@2 {
+					reg = <2>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+			};
 		};
 	};
 };
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -146,7 +174,7 @@
 			};
 
 			channel@8 {
-				gw,mode = <1>;
+				gw,mode = <3>;
 				reg = <0x08>;
 				label = "vdd_bat";
 			};
@@ -231,8 +259,6 @@
 		};
 
 		fan-controller@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "gw,gsc-fan";
 			reg = <0x0a>;
 		};
@@ -271,7 +297,7 @@
 		pagesize = <16>;
 	};
 
-	rtc@68 {
+	gsc_rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -365,8 +391,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	eeprom@52 {
@@ -389,6 +418,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
@@ -435,6 +466,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
@@ -442,6 +480,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
index c557dbf4dcd6..429be2bab8a2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
@@ -47,25 +47,20 @@
 		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_usb1_en>;
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
 };
 
-/* off-board header */
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio1 {
@@ -96,7 +91,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "INT1";
 	};
 };
 
@@ -120,9 +114,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
-		 <&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
 	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
 			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
 	assigned-clock-rates = <10000000>, <250000000>;
@@ -146,9 +139,10 @@
 };
 
 &usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	dr_mode = "otg";
 	over-current-active-low;
-	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
@@ -206,20 +200,13 @@
 		>;
 	};
 
-	pinctrl_reg_usb1_en: regusb1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x41
-			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
-			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
-		>;
-	};
-
 	pinctrl_spi2: spi2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
 			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0xd6
 		>;
 	};
 
@@ -236,4 +223,11 @@
 			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
 		>;
 	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
+		>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dts
deleted file mode 100644
index 4eaf8aabcbff..000000000000
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Gateworks Corporation
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "imx8mm-pinfunc.h"
-
-/dts-v1/;
-/plugin/;
-
-&{/} {
-	compatible = "gw,imx8mm-gw72xx-0x", "fsl,imx8mm";
-
-	reg_cam: regulator-cam {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_cam>;
-		compatible = "regulator-fixed";
-		regulator-name = "reg_cam";
-		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	cam24m: cam24m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "cam24m";
-	};
-};
-
-&csi {
-	status = "okay";
-};
-
-&i2c3 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	imx219: sensor@10 {
-		compatible = "sony,imx219";
-		reg = <0x10>;
-		clocks = <&cam24m>;
-		VDIG-supply = <&reg_cam>;
-
-		port {
-			/* MIPI CSI-2 bus endpoint */
-			imx219_to_mipi_csi2: endpoint {
-				remote-endpoint = <&imx8mm_mipi_csi_in>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-				link-frequencies = /bits/ 64 <456000000>;
-			};
-		};
-	};
-};
-
-&mipi_csi {
-	status = "okay";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			imx8mm_mipi_csi_in: endpoint {
-				remote-endpoint = <&imx219_to_mipi_csi2>;
-				data-lanes = <1 2>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			imx8mm_mipi_csi_out: endpoint {
-				remote-endpoint = <&csi_in>;
-			};
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl_reg_cam: regcamgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x41
-		>;
-	};
-};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso
new file mode 100644
index 000000000000..c09aa80d2ba2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw72xx-0x", "fsl,imx8mm";
+
+	reg_vana: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	reg_vddl: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	reg_cam: regulator-cam {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_cam>;
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam";
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	cam24m: cam24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "cam24m";
+	};
+};
+
+&csi {
+	status = "okay";
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	imx219: sensor@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		clocks = <&cam24m>;
+		VDIG-supply = <&reg_cam>;
+		VANA-supply = <&reg_vana>;
+		VDDL-supply = <&reg_vddl>;
+
+		port {
+			/* MIPI CSI-2 bus endpoint */
+			imx219_to_mipi_csi2: endpoint {
+				remote-endpoint = <&imx8mm_mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <456000000>;
+			};
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			imx8mm_mipi_csi_in: endpoint {
+				remote-endpoint = <&imx219_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			imx8mm_mipi_csi_out: endpoint {
+				remote-endpoint = <&csi_in>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_reg_cam: regcamgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rpidsi.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rpidsi.dtso
new file mode 100644
index 000000000000..e0768d408c3b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rpidsi.dtso
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
+
+	panel {
+		compatible = "powertip,ph800480t013-idf02";
+		power-supply = <&attiny>;
+		backlight = <&attiny>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	attiny: regulator@45 {
+		compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
+		reg = <0x45>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,burst-clock-frequency = <891000000>;
+	samsung,esc-clock-frequency = <54000000>;
+	samsung,pll-clock-frequency = <27000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	bridge@0 {
+		compatible = "toshiba,tc358762";
+		reg = <0>;
+		vddc-supply = <&attiny>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts
deleted file mode 100644
index 3ea73a6886ff..000000000000
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Gateworks Corporation
- *
- * GW72xx RS232 with RTS/CTS hardware flow control:
- *  - GPIO4_0 rs485_en needs to be driven low (in-active)
- *  - UART4_TX becomes RTS
- *  - UART4_RX becomes CTS
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "imx8mm-pinfunc.h"
-
-/dts-v1/;
-/plugin/;
-
-&{/} {
-	compatible = "gw,imx8mm-gw72xx-0x";
-};
-
-&gpio4 {
-	rs485_en {
-		gpio-hog;
-		gpios = <0 GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "rs485_en";
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
-	cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
-			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
-			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
-			MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28	0x140
-		>;
-	};
-};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
new file mode 100644
index 000000000000..bb2056746f8c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ *
+ * GW72xx RS232 with RTS/CTS hardware flow control:
+ *  - GPIO4_0 rs485_en needs to be driven low (in-active)
+ *  - UART4_TX becomes RTS
+ *  - UART4_RX becomes CTS
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&gpio4 {
+	rs485-en-hog {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "rs485_en";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+			MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dts
deleted file mode 100644
index c3cd9f2b0db3..000000000000
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dts
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Gateworks Corporation
- *
- * GW72xx RS422 (RS485 full duplex):
- *  - GPIO1_0 rs485_term selects on-chip termination
- *  - GPIO4_0 rs485_en needs to be driven high (active)
- *  - GPIO4_2 rs485_hd needs to be driven low (in-active)
- *  - UART4_TX is DE for RS485 transmitter
- *  - RS485_EN needs to be pulled high
- *  - RS485_HALF needs to be low
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "imx8mm-pinfunc.h"
-
-/dts-v1/;
-/plugin/;
-
-&{/} {
-	compatible = "gw,imx8mm-gw72xx-0x";
-};
-
-&gpio4 {
-	rs485_en {
-		gpio-hog;
-		gpios = <0 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "rs485_en";
-	};
-
-	rs485_hd {
-		gpio-hog;
-		gpios = <2 GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "rs485_hd";
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-	linux,rs485-enabled-at-boot-time;
-	status = "okay";
-};
-
-&uart4 {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
-			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
-			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
-		>;
-	};
-};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso
new file mode 100644
index 000000000000..45ac8bdce869
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ *
+ * GW72xx RS422 (RS485 full duplex):
+ *  - GPIO1_0 rs485_term selects on-chip termination
+ *  - GPIO4_0 rs485_en needs to be driven high (active)
+ *  - GPIO4_2 rs485_hd needs to be driven low (in-active)
+ *  - UART4_TX is DE for RS485 transmitter
+ *  - RS485_EN needs to be pulled high
+ *  - RS485_HALF needs to be low
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&gpio4 {
+	rs485-en-hog {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_en";
+	};
+
+	rs485-hd-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "rs485_hd";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dts
deleted file mode 100644
index cc0a287226ab..000000000000
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dts
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Gateworks Corporation
- *
- * GW72xx RS485 HD:
- *  - GPIO1_0 rs485_term selects on-chip termination
- *  - GPIO4_0 rs485_en needs to be driven high (active)
- *  - GPIO4_2 rs485_hd needs to be driven high (active)
- *  - UART4_TX is DE for RS485 transmitter
- *  - RS485_EN needs to be pulled high
- *  - RS485_HALF needs to be pulled high
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "imx8mm-pinfunc.h"
-
-/dts-v1/;
-/plugin/;
-
-&{/} {
-	compatible = "gw,imx8mm-gw72xx-0x";
-};
-
-&gpio4 {
-	rs485_en {
-		gpio-hog;
-		gpios = <0 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "rs485_en";
-	};
-
-	rs485_hd {
-		gpio-hog;
-		gpios = <2 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "rs485_hd";
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-	linux,rs485-enabled-at-boot-time;
-	status = "okay";
-};
-
-&uart4 {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
-			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
-			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
-		>;
-	};
-};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso
new file mode 100644
index 000000000000..30aa620d7004
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ *
+ * GW72xx RS485 HD:
+ *  - GPIO1_0 rs485_term selects on-chip termination
+ *  - GPIO4_0 rs485_en needs to be driven high (active)
+ *  - GPIO4_2 rs485_hd needs to be driven high (active)
+ *  - UART4_TX is DE for RS485 transmitter
+ *  - RS485_EN needs to be pulled high
+ *  - RS485_HALF needs to be pulled high
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&gpio4 {
+	rs485-en-hog {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_en";
+	};
+
+	rs485-hd-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_hd";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts
index b1e7540f0281..641be3af989d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts
@@ -17,4 +17,3 @@
 		stdout-path = &uart2;
 	};
 };
-
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
index 41d0de6a7027..752caa38eb03 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -84,8 +84,15 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio1 {
@@ -118,7 +125,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "INT1";
 	};
 };
 
@@ -142,9 +148,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
-		 <&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
 	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
 			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
 	assigned-clock-rates = <10000000>, <250000000>;
@@ -154,23 +159,30 @@
 
 	pcie@0,0 {
 		reg = <0x0000 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
 
-		pcie@1,0 {
+		pcie@0,0 {
 			reg = <0x0000 0 0 0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
 
-			pcie@2,3 {
+			pcie@3,0 {
 				reg = <0x1800 0 0 0 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
 
-				eth1: pcie@5,0 {
+				eth1: ethernet@0,0 {
 					reg = <0x0000 0 0 0 0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
 
 					local-mac-address = [00 00 00 00 00 00];
 				};
@@ -314,6 +326,7 @@
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
 			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0xd6
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dts
deleted file mode 100644
index f3ece4b7fbbd..000000000000
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Gateworks Corporation
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "imx8mm-pinfunc.h"
-
-/dts-v1/;
-/plugin/;
-
-&{/} {
-	compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
-
-	reg_cam: regulator-cam {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_cam>;
-		compatible = "regulator-fixed";
-		regulator-name = "reg_cam";
-		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	cam24m: cam24m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "cam24m";
-	};
-};
-
-&csi {
-	status = "okay";
-};
-
-&i2c3 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	imx219: sensor@10 {
-		compatible = "sony,imx219";
-		reg = <0x10>;
-		clocks = <&cam24m>;
-		VDIG-supply = <&reg_cam>;
-
-		port {
-			/* MIPI CSI-2 bus endpoint */
-			imx219_to_mipi_csi2: endpoint {
-				remote-endpoint = <&imx8mm_mipi_csi_in>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-				link-frequencies = /bits/ 64 <456000000>;
-			};
-		};
-	};
-};
-
-&mipi_csi {
-	status = "okay";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			imx8mm_mipi_csi_in: endpoint {
-				remote-endpoint = <&imx219_to_mipi_csi2>;
-				data-lanes = <1 2>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			imx8mm_mipi_csi_out: endpoint {
-				remote-endpoint = <&csi_in>;
-			};
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl_reg_cam: regcamgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x41
-		>;
-	};
-};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso
new file mode 100644
index 000000000000..cfc014eb038d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
+
+	reg_vana: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	reg_vddl: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	reg_cam: regulator-cam {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_cam>;
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam";
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	cam24m: cam24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "cam24m";
+	};
+};
+
+&csi {
+	status = "okay";
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	imx219: sensor@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		clocks = <&cam24m>;
+		VDIG-supply = <&reg_cam>;
+		VANA-supply = <&reg_vana>;
+		VDDL-supply = <&reg_vddl>;
+
+		port {
+			/* MIPI CSI-2 bus endpoint */
+			imx219_to_mipi_csi2: endpoint {
+				remote-endpoint = <&imx8mm_mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <456000000>;
+			};
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			imx8mm_mipi_csi_in: endpoint {
+				remote-endpoint = <&imx219_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			imx8mm_mipi_csi_out: endpoint {
+				remote-endpoint = <&csi_in>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_reg_cam: regcamgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rpidsi.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rpidsi.dtso
new file mode 100644
index 000000000000..e0768d408c3b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rpidsi.dtso
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
+
+	panel {
+		compatible = "powertip,ph800480t013-idf02";
+		power-supply = <&attiny>;
+		backlight = <&attiny>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	attiny: regulator@45 {
+		compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
+		reg = <0x45>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,burst-clock-frequency = <891000000>;
+	samsung,esc-clock-frequency = <54000000>;
+	samsung,pll-clock-frequency = <27000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	bridge@0 {
+		compatible = "toshiba,tc358762";
+		reg = <0>;
+		vddc-supply = <&attiny>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts
deleted file mode 100644
index 2fa635e1c1a8..000000000000
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Gateworks Corporation
- *
- * GW73xx RS232 with RTS/CTS hardware flow control:
- *  - GPIO4_0 rs485_en needs to be driven low (in-active)
- *  - UART4_TX becomes RTS
- *  - UART4_RX becomes CTS
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "imx8mm-pinfunc.h"
-
-/dts-v1/;
-/plugin/;
-
-&{/} {
-	compatible = "gw,imx8mm-gw73xx-0x";
-};
-
-&gpio4 {
-	rs485_en {
-		gpio-hog;
-		gpios = <0 GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "rs485_en";
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
-	cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
-			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
-			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
-			MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28	0x140
-		>;
-	};
-};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
new file mode 100644
index 000000000000..b1a9f35e1dfa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ *
+ * GW73xx RS232 with RTS/CTS hardware flow control:
+ *  - GPIO4_0 rs485_en needs to be driven low (in-active)
+ *  - UART4_TX becomes RTS
+ *  - UART4_RX becomes CTS
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&gpio4 {
+	rs485-en-hog {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "rs485_en";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+			MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dts
deleted file mode 100644
index 3e6404340d52..000000000000
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dts
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2021 Gateworks Corporation
- *
- * GW73xx RS422 (RS485 full duplex):
- *  - GPIO1_0 rs485_term selects on-chip termination
- *  - GPIO4_0 rs485_en needs to be driven high (active)
- *  - GPIO4_2 rs485_hd needs to be driven low (in-active)
- *  - UART4_TX is DE for RS485 transmitter
- *  - RS485_EN needs to be pulled high
- *  - RS485_HALF needs to be low
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "imx8mm-pinfunc.h"
-
-/dts-v1/;
-/plugin/;
-
-&{/} {
-	compatible = "gw,imx8mm-gw73xx-0x";
-};
-
-&gpio4 {
-	rs485_en {
-		gpio-hog;
-		gpios = <0 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "rs485_en";
-	};
-
-	rs485_hd {
-		gpio-hog;
-		gpios = <2 GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "rs485_hd";
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-	linux,rs485-enabled-at-boot-time;
-	status = "okay";
-};
-
-&uart4 {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
-			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
-			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
-		>;
-	};
-};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso
new file mode 100644
index 000000000000..44ebc0a58c51
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Gateworks Corporation
+ *
+ * GW73xx RS422 (RS485 full duplex):
+ *  - GPIO1_0 rs485_term selects on-chip termination
+ *  - GPIO4_0 rs485_en needs to be driven high (active)
+ *  - GPIO4_2 rs485_hd needs to be driven low (in-active)
+ *  - UART4_TX is DE for RS485 transmitter
+ *  - RS485_EN needs to be pulled high
+ *  - RS485_HALF needs to be low
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&gpio4 {
+	rs485-en-hog {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_en";
+	};
+
+	rs485-hd-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "rs485_hd";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dts
deleted file mode 100644
index 2c71ab9854cb..000000000000
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dts
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2021 Gateworks Corporation
- *
- * GW73xx RS485 HD:
- *  - GPIO1_0 rs485_term selects on-chip termination
- *  - GPIO4_0 rs485_en needs to be driven high (active)
- *  - GPIO4_2 rs485_hd needs to be driven high (active)
- *  - UART4_TX is DE for RS485 transmitter
- *  - RS485_EN needs to be pulled high
- *  - RS485_HALF needs to be pulled high
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "imx8mm-pinfunc.h"
-
-/dts-v1/;
-/plugin/;
-
-&{/} {
-	compatible = "gw,imx8mm-gw73xx-0x";
-};
-
-&gpio4 {
-	rs485_en {
-		gpio-hog;
-		gpios = <0 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "rs485_en";
-	};
-
-	rs485_hd {
-		gpio-hog;
-		gpios = <2 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "rs485_hd";
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-	linux,rs485-enabled-at-boot-time;
-	status = "okay";
-};
-
-&uart4 {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
-			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
-			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
-		>;
-	};
-};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso
new file mode 100644
index 000000000000..2f8a7ac40873
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Gateworks Corporation
+ *
+ * GW73xx RS485 HD:
+ *  - GPIO1_0 rs485_term selects on-chip termination
+ *  - GPIO4_0 rs485_en needs to be driven high (active)
+ *  - GPIO4_2 rs485_hd needs to be driven high (active)
+ *  - UART4_TX is DE for RS485 transmitter
+ *  - RS485_EN needs to be pulled high
+ *  - RS485_HALF needs to be pulled high
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&gpio4 {
+	rs485-en-hog {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_en";
+	};
+
+	rs485-hd-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_hd";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
index 244ef8d6cc68..2aa6c1090fc7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -104,8 +104,15 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio1 {
@@ -138,7 +145,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "INT1";
 	};
 };
 
@@ -162,9 +168,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
-		 <&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
 	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
 			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
 	assigned-clock-rates = <10000000>, <250000000>;
@@ -174,23 +179,30 @@
 
 	pcie@0,0 {
 		reg = <0x0000 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
 
-		pcie@1,0 {
+		pcie@0,0 {
 			reg = <0x0000 0 0 0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
 
-			pcie@2,4 {
+			pcie@4,0 {
 				reg = <0x2000 0 0 0 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
 
-				eth1: pcie@6,0 {
+				eth1: ethernet@0,0 {
 					reg = <0x0000 0 0 0 0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
 
 					local-mac-address = [00 00 00 00 00 00];
 				};
@@ -222,7 +234,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
 	cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {
@@ -364,6 +375,7 @@
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
 			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0xd6
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw75xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw75xx-0x.dts
new file mode 100644
index 000000000000..04f06a55da5c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw75xx-0x.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-venice-gw700x.dtsi"
+#include "imx8mm-venice-gw75xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW75xx-0x i.MX8MM Development Kit";
+	compatible = "gateworks,imx8mm-gw75xx-0x", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+/* Disable SOM interfaces not used on baseboard */
+&fec1 {
+	status = "disabled";
+};
+
+&usdhc1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw75xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw75xx.dtsi
new file mode 100644
index 000000000000..53004c4a13aa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw75xx.dtsi
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: clock-pcie0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		regulator-name = "usb2_vbus";
+		gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "SD2_3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "gpioa", "gpiob", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "pci_usb_sel",
+		"", "", "", "pci_wdis#",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "",
+		"gpioc", "gpiod", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		st,drdy-int-pin = <1>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c32";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* USB1 - Type C front panel SINK port J14 */
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+/* USB2 4-port USB3.0 HUB:
+ *  P1 - USBC connector (host only)
+ *  P2 - USB2 test connector
+ *  P3 - miniPCIe full card
+ *  P4 - miniPCIe half card
+ */
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000040 /* GPIOA */
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x40000040 /* GPIOB */
+			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0x40000106 /* PCI_USBSEL */
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000106 /* PCIE_WDIS# */
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x40000040 /* GPIOD */
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x40000040 /* GPIOC */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8	0x159
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0	0x6	/* LEDG */
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2	0x6	/* LEDR */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c2
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c2
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x106
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x106
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x6	/* USBHUB_RST# (ext p/u) */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x140
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x140
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x140
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index 35fb929e7bcc..272c2b223d16 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -22,6 +22,8 @@
 		ethernet2 = &lan2;
 		ethernet3 = &lan3;
 		ethernet4 = &lan4;
+		rtc0 = &gsc_rtc;
+		rtc1 = &snvs_rtc;
 		usb0 = &usbotg1;
 		usb1 = &usbotg2;
 	};
@@ -242,21 +244,37 @@
 	};
 };
 
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
 &ddrc {
 	operating-points-v2 = <&ddrc_opp_table>;
 
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -269,7 +287,8 @@
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi1>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>,
+		   <&gpio4 24 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	flash@0 {
@@ -278,6 +297,12 @@
 		spi-max-frequency = <40000000>;
 		status = "okay";
 	};
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &fec1 {
@@ -303,7 +328,7 @@
 
 &gpio4 {
 	gpio-line-names = "", "", "", "",
-		"", "", "uart3_rs232#", "uart3_rs422#",
+		"dig1_ctl", "dig2_ctl", "uart3_rs232#", "uart3_rs422#",
 		"uart3_rs485#", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "uart4_rs485#", "", "sim1det#", "sim2det#", "";
@@ -326,8 +351,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -338,6 +366,8 @@
 		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		adc {
 			compatible = "gw,gsc-adc";
@@ -351,7 +381,7 @@
 			};
 
 			channel@8 {
-				gw,mode = <1>;
+				gw,mode = <3>;
 				reg = <0x08>;
 				label = "vdd_bat";
 			};
@@ -469,7 +499,7 @@
 		pagesize = <16>;
 	};
 
-	rtc@68 {
+	gsc_rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -477,8 +507,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	pmic@4b {
@@ -490,7 +523,7 @@
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 		rohm,reset-snvs-powered;
 		#clock-cells = <0>;
-		clocks = <&osc_32k 0>;
+		clocks = <&osc_32k>;
 		clock-output-names = "clk-32k-out";
 
 		regulators {
@@ -505,7 +538,7 @@
 			};
 
 			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
-			BUCK2 {
+			buck2: BUCK2 {
 				regulator-name = "buck2";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1300000>;
@@ -600,8 +633,11 @@
 
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	leds_gpio: gpio@20 {
@@ -617,7 +653,6 @@
 		pinctrl-0 = <&pinctrl_ksz>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
-		phy-mode = "rgmii-id";
 
 		ports {
 			#address-cells = <1>;
@@ -626,30 +661,33 @@
 			lan1: port@0 {
 				reg = <0>;
 				label = "lan1";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan2: port@1 {
 				reg = <1>;
 				label = "lan2";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan3: port@2 {
 				reg = <2>;
 				label = "lan3";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan4: port@3 {
 				reg = <3>;
 				label = "lan4";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&fec1>;
 				phy-mode = "rgmii-id";
 
@@ -669,8 +707,11 @@
 
 &i2c4 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
@@ -686,9 +727,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
-		 <&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
 	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
 			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
 	assigned-clock-rates = <10000000>, <250000000>;
@@ -717,7 +757,6 @@
 	dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 	dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 	dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -733,7 +772,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
 	cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -742,7 +780,6 @@
 	pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>;
 	cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -755,17 +792,27 @@
 &usbotg2 {
 	dr_mode = "host";
 	vbus-supply = <&reg_usb2_vbus>;
+	over-current-active-low;
 	status = "okay";
 };
 
 /* SDIO WiFi */
 &usdhc1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	bus-width = <4>;
 	non-removable;
 	vmmc-supply = <&reg_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	wifi@0 {
+		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+		reg = <0>;
+	};
 };
 
 /* microSD */
@@ -786,6 +833,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
@@ -804,6 +853,8 @@
 
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4	0x40000041 /* DIG1_CTL */
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x40000041 /* DIG2_CTL */
 			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* DIG2_OUT */
 			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x40000041 /* DIG2_IN */
 			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x40000041 /* DIG1_IN */
@@ -848,6 +899,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
@@ -855,6 +913,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
@@ -862,6 +927,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
@@ -869,6 +941,13 @@
 		>;
 	};
 
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
 	pinctrl_ksz: kszgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18	0x41
@@ -921,6 +1000,7 @@
 			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x82
 			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x82
 			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x140
+			MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24	0x140
 		>;
 	};
 
@@ -997,6 +1077,28 @@
 		>;
 	};
 
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+		>;
+	};
+
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index 6dc5eda2d256..c09b40fc6dec 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -19,6 +19,8 @@
 
 	aliases {
 		ethernet1 = &eth1;
+		rtc0 = &gsc_rtc;
+		rtc1 = &snvs_rtc;
 		usb0 = &usbotg1;
 		usb1 = &usbotg2;
 	};
@@ -198,15 +200,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -222,7 +224,6 @@
 		compatible = "microchip,mcp2515";
 		reg = <0>;
 		clocks = <&can20m>;
-		oscillator-frequency = <20000000>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		spi-max-frequency = <10000000>;
@@ -262,7 +263,7 @@
 
 &gpio1 {
 	gpio-line-names = "", "", "", "", "", "", "", "",
-		"", "", "", "", "", "m2_reset", "", "m2_wdis#",
+		"m2_pwr_en", "", "", "", "", "m2_reset", "", "m2_wdis#",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "";
 };
@@ -284,7 +285,8 @@
 &gpio4 {
 	gpio-line-names = "", "", "", "", "", "", "", "",
 		"", "", "", "amp_gpio3", "amp_gpio2", "", "amp_gpio1", "",
-		"", "", "", "", "amp_gpio4", "app_gpio1", "", "uart1_rs485",
+		"lte_pwr#", "lte_rst", "lte_int", "",
+		"amp_gpio4", "app_gpio1", "vdd_4p0_en", "uart1_rs485",
 		"", "uart1_term", "uart1_half", "app_gpio2",
 		"mipi_gpio1", "", "", "";
 };
@@ -299,8 +301,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -311,6 +316,8 @@
 		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		adc {
 			compatible = "gw,gsc-adc";
@@ -324,7 +331,7 @@
 			};
 
 			channel@8 {
-				gw,mode = <1>;
+				gw,mode = <3>;
 				reg = <0x08>;
 				label = "vdd_bat";
 			};
@@ -428,7 +435,7 @@
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		rohm,reset-snvs-powered;
 		#clock-cells = <0>;
-		clocks = <&osc_32k 0>;
+		clocks = <&osc_32k>;
 		clock-output-names = "clk-32k-out";
 
 		regulators {
@@ -559,7 +566,7 @@
 		pagesize = <16>;
 	};
 
-	rtc@68 {
+	gsc_rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -567,8 +574,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	accelerometer@19 {
@@ -579,23 +589,28 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "INT1";
 	};
 };
 
 /* off-board header */
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
 /* off-board header */
 &i2c4 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
@@ -611,9 +626,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
-		 <&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
 	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
 			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
 	assigned-clock-rates = <10000000>, <250000000>;
@@ -623,13 +637,16 @@
 
 	pcie@0,0 {
 		reg = <0x0000 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
 
-		eth1: pcie@1,0 {
+		eth1: ethernet@0,0 {
 			reg = <0x0000 0 0 0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
 
 			local-mac-address = [00 00 00 00 00 00];
 		};
@@ -652,7 +669,6 @@
 	pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
 	rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -669,7 +685,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
 	rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {
@@ -687,7 +702,6 @@
 	dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;
 	dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
 	dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -706,12 +720,21 @@
 
 /* SDIO WiFi */
 &usdhc2 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
 	bus-width = <4>;
 	non-removable;
 	vmmc-supply = <&reg_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	wifi@0 {
+		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+		reg = <0>;
+	};
 };
 
 /* eMMC */
@@ -720,6 +743,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
@@ -739,14 +764,19 @@
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x40000159 /* M2_GDIS# */
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x40000041 /* M2_PWR_EN */
 			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041 /* M2_RESET */
 			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x40000119 /* M2_OFF# */
 			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x40000159 /* M2_WDIS# */
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18       0x40000041 /* LTE_INT */
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17       0x40000041 /* LTE_RST# */
+			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16       0x40000041 /* LTE_PWR */
 			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14	0x40000041 /* AMP GPIO1 */
 			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12	0x40000041 /* AMP GPIO2 */
 			MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11	0x40000041 /* AMP GPIO3 */
 			MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20	0x40000041 /* AMP_GPIO4 */
 			MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x40000041 /* APP GPIO1 */
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22	0x40000041 /* VDD_4P0_EN */
 			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x40000041 /* APP GPIO2 */
 			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x40000041 /* UART2_EN# */
 			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x40000041 /* MIPI_GPIO1 */
@@ -780,8 +810,6 @@
 			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
 			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19 /* RST# */
 			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19 /* IRQ# */
-			MX8MM_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN	0x141
-			MX8MM_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT	0x141
 		>;
 	};
 
@@ -798,6 +826,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
@@ -805,6 +840,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
@@ -812,6 +854,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
@@ -819,6 +868,13 @@
 		>;
 	};
 
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
 	pinctrl_gpio_leds: gpioledgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x19
@@ -953,6 +1009,28 @@
 		>;
 	};
 
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
index a65761a53f23..636daa3d6ca2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
@@ -18,6 +18,8 @@
 
 	aliases {
 		ethernet0 = &fec1;
+		rtc0 = &gsc_rtc;
+		rtc1 = &snvs_rtc;
 		usb0 = &usbotg1;
 	};
 
@@ -207,15 +209,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -250,7 +252,7 @@
 };
 
 &gpio2 {
-	gpio-line-names = "dig2_in", "dig2_out#", "", "", "", "", "", "",
+	gpio-line-names = "dig2_in", "dig2_out#", "dig2_ctl", "", "", "", "dig1_ctl", "",
 		"dig1_out#", "dig1_in", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "";
@@ -265,8 +267,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -277,6 +282,8 @@
 		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		adc {
 			compatible = "gw,gsc-adc";
@@ -290,7 +297,7 @@
 			};
 
 			channel@8 {
-				gw,mode = <1>;
+				gw,mode = <3>;
 				reg = <0x08>;
 				label = "vdd_bat";
 			};
@@ -389,7 +396,7 @@
 		pagesize = <16>;
 	};
 
-	rtc@68 {
+	gsc_rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -397,8 +404,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	pmic@4b {
@@ -410,7 +420,7 @@
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		rohm,reset-snvs-powered;
 		#clock-cells = <0>;
-		clocks = <&osc_32k 0>;
+		clocks = <&osc_32k>;
 		clock-output-names = "clk-32k-out";
 
 		regulators {
@@ -520,8 +530,11 @@
 
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	accelerometer@19 {
@@ -532,7 +545,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "INT1";
 	};
 };
 
@@ -548,9 +560,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
-		 <&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
 	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
 			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
 	assigned-clock-rates = <10000000>, <250000000>;
@@ -559,6 +570,10 @@
 	status = "okay";
 };
 
+&disp_blk_ctrl {
+	status = "disabled";
+};
+
 &pgc_mipi {
 	status = "disabled";
 };
@@ -572,7 +587,6 @@
 	dtr-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 	dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 	dcd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -607,6 +621,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
@@ -630,6 +646,8 @@
 			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x40000041 /* RS232# */
 			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9	0x40000041 /* DIG1_IN */
 			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x40000041 /* DIG1_OUT */
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x40000041 /* DIG1_CTL */
+			MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2	0x40000041 /* DIG2_CTL */
 			MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0		0x40000041 /* DIG2_IN */
 			MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1		0x40000041 /* DIG2_OUT */
 			MX8MM_IOMUXC_ECSPI1_MOSI_GPIO5_IO7	0x40000041 /* SIM1DET# */
@@ -679,6 +697,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
@@ -686,6 +711,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
@@ -693,6 +725,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
 	pinctrl_gpio_leds: gpioledgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
new file mode 100644
index 000000000000..99572961d9e1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
@@ -0,0 +1,929 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Gateworks Venice GW7904 i.MX8MM board";
+	compatible = "gateworks,imx8mm-gw7904", "fsl,imx8mm";
+
+	aliases {
+		rtc0 = &gsc_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-1 {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-2 {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-3 {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		key-4 {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led01_grn";
+			gpios = <&gpioled 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led01_yel";
+			gpios = <&gpioled 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led02_grn";
+			gpios = <&gpioled 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led02_yel";
+			gpios = <&gpioled 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led03_grn";
+			gpios = <&gpioled 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-5 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led03_yel";
+			gpios = <&gpioled 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-6 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led04_grn";
+			gpios = <&gpioled 6 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led04_yel";
+			gpios = <&gpioled 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-8 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led05_grn";
+			gpios = <&gpioled 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-9 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led05_yel";
+			gpios = <&gpioled 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-10 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led06_grn";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-11 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led06_red";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-12 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led07_grn";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-13 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led07_red";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-14 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led08_grn";
+			gpios = <&gpioled 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-15 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led08_yel";
+			gpios = <&gpioled 11 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-16 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led09_grn";
+			gpios = <&gpioled 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-17 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led09_yel";
+			gpios = <&gpioled 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-18 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led10_grn";
+			gpios = <&gpioled 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-19 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led10_yel";
+			gpios = <&gpioled 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "", "", "rs232_en#", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "", "", "pci_wdis#", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <700000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_0p9";
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_soc";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_arm";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_1p8";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_dram";
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gsc_rtc: rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			/* vdd_soc: 0.805-0.900V (typ=0.8V) */
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
+			BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_3p3 */
+			BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_1p8 */
+			BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_dram */
+			BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* nvcc_snvs_1p8 */
+			LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_snvs_0p8 */
+			LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdda_1p8 */
+			LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	accelerometer@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gpioled: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&disp_blk_ctrl {
+	status = "disabled";
+};
+
+&pgc_mipi {
+	status = "disabled";
+};
+
+/* off-board RS232 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	cts-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x40000041 /* RS232# */
+			MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12	0x40000041 /* PCI_WDIS# */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x159
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24		0x19 /* IRQ# */
+			MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25		0x19 /* RST# */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x40000019
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x40000019
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x40000019
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x40000019
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26	0x159
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x41
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26	0x140 /* CTS# in */
+			MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27	0x140 /* RTS# out */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
index c2a5c2f7b204..3d0b14968131 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
@@ -9,16 +9,17 @@
 		simple-audio-card,bitclock-master = <&dailink_master>;
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,name = "imx8mm-wm8904";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "verdin-wm8904";
 		simple-audio-card,routing =
 			"Headphone Jack", "HPOUTL",
 			"Headphone Jack", "HPOUTR",
 			"IN2L", "Line In Jack",
 			"IN2R", "Line In Jack",
-			"Headphone Jack", "MICBIAS",
-			"IN1L", "Headphone Jack";
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
 		simple-audio-card,widgets =
-			"Microphone", "Headphone Jack",
+			"Microphone", "Microphone Jack",
 			"Headphone", "Headphone Jack",
 			"Line", "Line In Jack";
 
@@ -31,6 +32,25 @@
 			sound-dai = <&sai2>;
 		};
 	};
+
+	reg_usb_hub: regulator-usb-hub {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		regulator-name = "HUB_PWR_EN";
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		regulator-name = "PCIE_1_PWR_EN";
+		startup-delay-us = <100000>;
+	};
 };
 
 /* Verdin SPI_1 */
@@ -57,6 +77,11 @@
 	status = "okay";
 };
 
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
 /* Current measurement into module VCC */
 &hwmon {
 	status = "okay";
@@ -92,6 +117,7 @@
 
 /* Verdin PCIE_1 */
 &pcie0 {
+	vpcie-supply = <&reg_pcie>;
 	status = "okay";
 };
 
@@ -114,6 +140,11 @@
 	status = "okay";
 };
 
+/* We support turning off sleep moci on Dahlia */
+&reg_force_sleep_moci {
+	status = "disabled";
+};
+
 /* Verdin I2S_1 */
 &sai2 {
 	status = "okay";
@@ -136,12 +167,22 @@
 
 /* Verdin USB_1 */
 &usbotg1 {
+	disable-over-current;
 	status = "okay";
 };
 
 /* Verdin USB_2 */
 &usbotg2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	disable-over-current;
 	status = "okay";
+
+	usb-hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		vdd-supply = <&reg_usb_hub>;
+	};
 };
 
 /* Verdin SD_1 */
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
index 73cc3fafa018..1d8d146d9eeb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
@@ -3,15 +3,14 @@
  * Copyright 2022 Toradex
  */
 
-#include "imx8mm-verdin-dahlia.dtsi"
-
 / {
 	sound_card: sound-card {
 		compatible = "simple-audio-card";
 		simple-audio-card,bitclock-master = <&dailink_master>;
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,name = "imx8mm-nau8822";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "verdin-nau8822";
 		simple-audio-card,routing =
 			"Headphones", "LHP",
 			"Headphones", "RHP",
@@ -41,27 +40,126 @@
 	};
 };
 
+/* Verdin SPI_1 */
+&ecspi2 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+	status = "okay";
+};
+
+/* Current measurement into module VCC */
+&hwmon {
+	status = "okay";
+};
+
+&hwmon_temp {
+	vs-supply = <&reg_1p8v>;
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
 &gpio_expander_21 {
 	status = "okay";
 };
 
 /* Verdin I2C_1 */
 &i2c4 {
+	status = "okay";
+
 	/* Audio Codec */
 	nau8822_1a: audio-codec@1a {
 		compatible = "nuvoton,nau8822";
 		reg = <0x1a>;
+		#sound-dai-cells = <0>;
 	};
 };
 
+/* Verdin PCIE_1 */
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	status = "okay";
+};
+
+/* Verdin I2S_1 */
+&sai2 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+	status = "okay";
+};
+
 /* Verdin UART_1, connector X50 through RS485 transceiver */
 &uart2 {
 	linux,rs485-enabled-at-boot-time;
 	rs485-rts-active-low;
 	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
 };
 
 /* Limit frequency on dev board due to long traces and bad signal integrity */
 &usdhc2 {
 	max-frequency = <100000000>;
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-ivy.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-ivy.dtsi
new file mode 100644
index 000000000000..29075ff5eda6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-ivy.dtsi
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ *
+ * Common dtsi for Verdin IMX8MM SoM on Ivy carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano
+ * https://www.toradex.com/products/carrier-board/ivy-carrier-board
+ */
+
+#include <dt-bindings/mux/mux.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	/* AIN1 Voltage w/o AIN1_MODE gpio control */
+	ain1_voltage_unmanaged: voltage-divider-ain1 {
+		compatible = "voltage-divider";
+		#io-channel-cells = <1>;
+		io-channels = <&ivy_adc1 0>;
+		full-ohms = <19>;
+		output-ohms = <1>;
+	};
+
+	/* AIN1 Current w/o AIN1_MODE gpio control */
+	ain1_current_unmanaged: current-sense-shunt-ain1 {
+		compatible = "current-sense-shunt";
+		#io-channel-cells = <0>;
+		io-channels = <&ivy_adc1 1>;
+		shunt-resistor-micro-ohms = <100000000>;
+	};
+
+	/* AIN1_MODE - SODIMM 216 */
+	ain1_mode_mux_ctrl: mux-controller-0 {
+		compatible = "gpio-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio5>;
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	ain1-voltage {
+		compatible = "io-channel-mux";
+		channels = "ain1_voltage", "";
+		io-channels = <&ain1_voltage_unmanaged 0>;
+		io-channel-names = "parent";
+		mux-controls = <&ain1_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	ain1-current {
+		compatible = "io-channel-mux";
+		channels = "", "ain1_current";
+		io-channels = <&ain1_current_unmanaged>;
+		io-channel-names = "parent";
+		mux-controls = <&ain1_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	/* AIN2 Voltage w/o AIN2_MODE gpio control */
+	ain2_voltage_unmanaged: voltage-divider-ain2 {
+		compatible = "voltage-divider";
+		#io-channel-cells = <1>;
+		io-channels = <&ivy_adc2 0>;
+		full-ohms = <19>;
+		output-ohms = <1>;
+	};
+
+	/* AIN2 Current w/o AIN2_MODE gpio control */
+	ain2_current_unmanaged: current-sense-shunt-ain2 {
+		compatible = "current-sense-shunt";
+		#io-channel-cells = <0>;
+		io-channels = <&ivy_adc2 1>;
+		shunt-resistor-micro-ohms = <100000000>;
+	};
+
+	/* AIN2_MODE - SODIMM 218 */
+	ain2_mode_mux_ctrl: mux-controller-1 {
+		compatible = "gpio-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio6>;
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	ain2-voltage {
+		compatible = "io-channel-mux";
+		channels = "ain2_voltage", "";
+		io-channels = <&ain2_voltage_unmanaged 0>;
+		io-channel-names = "parent";
+		mux-controls = <&ain2_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	ain2-current {
+		compatible = "io-channel-mux";
+		channels = "", "ain2_current";
+		io-channels = <&ain2_current_unmanaged>;
+		io-channel-names = "parent";
+		mux-controls = <&ain2_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ivy_leds>;
+
+		/* D7 Blue - SODIMM 30 - LEDs.GPIO1 */
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D7 Green - SODIMM 32 - LEDs.GPIO2 */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D7 Red - SODIMM 34 - LEDs.GPIO3 */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D8 Blue - SODIMM 36 - LEDs.GPIO4 */
+		led-3 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D8 Green - SODIMM 54 - LEDs.GPIO5 */
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D8 Red - SODIMM 44 - LEDs.GPIO6 */
+		led-5 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D9 Blue - SODIMM 46 - LEDs.GPIO7 */
+		led-6 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <3>;
+			gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D9 Red - SODIMM 48 - LEDs.GPIO8 */
+		led-7 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <3>;
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_3v2_ain1: regulator-3v2-ain1 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3200000>;
+		regulator-min-microvolt = <3200000>;
+		regulator-name = "+3V2_AIN1";
+	};
+
+	reg_3v2_ain2: regulator-3v2-ain2 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3200000>;
+		regulator-min-microvolt = <3200000>;
+		regulator-name = "+3V2_AIN2";
+	};
+
+	/* Ivy Power Supply Input Voltage */
+	ivy-input-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_1 */
+		io-channels = <&verdin_som_adc 7>;
+		full-ohms = <204700>; /* 200k + 4.7k */
+		output-ohms = <4700>;
+	};
+
+	ivy-5v-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_2 */
+		io-channels = <&verdin_som_adc 6>;
+		full-ohms = <39000>; /* 27k + 12k */
+		output-ohms = <12000>;
+	};
+
+	ivy-3v3-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_3 */
+		io-channels = <&verdin_som_adc 5>;
+		full-ohms = <54000>; /* 27k + 27k */
+		output-ohms = <27000>;
+	};
+
+	ivy-1v8-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_4 */
+		io-channels = <&verdin_som_adc 4>;
+		full-ohms = <39000>; /* 12k + 27k */
+		output-ohms = <27000>;
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	pinctrl-0 = <&pinctrl_ecspi2>,
+		    <&pinctrl_gpio1>,
+		    <&pinctrl_gpio4>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio3 4 GPIO_ACTIVE_LOW>,
+		   <&gpio5 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		spi-max-frequency = <18500000>;
+	};
+
+	fram@2 {
+		compatible = "fujitsu,mb85rs256", "atmel,at25";
+		reg = <2>;
+		address-width = <16>;
+		size = <32768>;
+		spi-max-frequency = <33000000>;
+		pagesize = <1>;
+	};
+};
+
+/* EEPROM on Ivy */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+/* Verdin ETH_1 */
+&fec1 {
+	status = "okay";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", /* 0 */
+		"",
+		"REL3", /* SODIMM 64 */
+		"",
+		"",
+		"",
+		"DIG_1", /* SODIMM 56 */
+		"DIG_2", /* SODIMM 58 */
+		"REL1",  /* SODIMM 60 */
+		"REL2",  /* SODIMM 62 */
+		"", /* 10 */
+		"",
+		"",
+		"",
+		"REL4",  /* SODIMM 66 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"",
+		"",
+		"";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", /* 0 */
+		"",
+		"",
+		"",
+		"",
+		"GPIO2", /* Verdin GPIO_2 - SODIMM 208 */
+		"",
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"GPIO3", /* Verdin GPIO_3 - SODIMM 210 */
+		"",
+		"",
+		"";
+};
+
+/* Temperature sensor on Ivy */
+&hwmon_temp {
+	compatible = "ti,tmp1075";
+	status = "okay";
+};
+
+/* Verdin I2C_4 CSI */
+&i2c3 {
+	status = "okay";
+
+	ivy_adc1: adc@40 {
+		compatible = "ti,ads1119";
+		reg = <0x40>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio7>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+		avdd-supply = <&reg_3v2_ain1>;
+		dvdd-supply = <&reg_3v2_ain1>;
+		vref-supply = <&reg_3v2_ain1>;
+		#address-cells = <1>;
+		#io-channel-cells = <1>;
+		#size-cells = <0>;
+
+		/* AIN1 0-33V Voltage Input */
+		channel@0 {
+			reg = <0>;
+			diff-channels = <0 1>;
+		};
+
+		/* AIN1 0-20mA Current Input */
+		channel@1 {
+			reg = <1>;
+			diff-channels = <2 3>;
+		};
+	};
+
+	ivy_adc2: adc@41 {
+		compatible = "ti,ads1119";
+		reg = <0x41>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio8>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		avdd-supply = <&reg_3v2_ain2>;
+		dvdd-supply = <&reg_3v2_ain2>;
+		vref-supply = <&reg_3v2_ain2>;
+		#address-cells = <1>;
+		#io-channel-cells = <1>;
+		#size-cells = <0>;
+
+		/* AIN2 0-33V Voltage Input */
+		channel@0 {
+			reg = <0>;
+			diff-channels = <0 1>;
+		};
+
+		/* AIN2 0-20mA Current Input */
+		channel@1 {
+			reg = <1>;
+			diff-channels = <2 3>;
+		};
+	};
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* Verdin USB_1*/
+&usbotg1 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>, <&pinctrl_gpio3>,
+		    <&pinctrl_ivy_dig_inputs>, <&pinctrl_ivy_relays>;
+
+	pinctrl_ivy_dig_inputs: ivydiginputsgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6	0x96>, /* SODIMM 56 */
+			<MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x96>; /* SODIMM 58 */
+	};
+
+	pinctrl_ivy_leds: ivyledsgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25	0x16>, /* SODIMM 30 */
+			<MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24	0x16>, /* SODIMM 32 */
+			<MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26	0x16>, /* SODIMM 34 */
+			<MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23	0x16>, /* SODIMM 36 */
+			<MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x16>, /* SODIMM 44 */
+			<MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24	0x16>, /* SODIMM 46 */
+			<MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x16>, /* SODIMM 48 */
+			<MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x16>; /* SODIMM 54 */
+	};
+
+	pinctrl_ivy_relays: ivyrelaysgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8	0x16>, /* SODIMM 60 */
+			<MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9	0x16>, /* SODIMM 62 */
+			<MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2	0x16>, /* SODIMM 64 */
+			<MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14	0x16>; /* SODIMM 66 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi
new file mode 100644
index 000000000000..4a0799d63446
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin IMX8MM SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_tpm_cs>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm_irq>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* EEPROM on Mallow */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+/* Verdin ETH_1 */
+&fec1 {
+	status = "okay";
+};
+
+/* Temperature sensor on Mallow */
+&hwmon_temp {
+	compatible = "ti,tmp1075";
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds: ledsgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0	0x106>, /* SODIMM 52 */
+			<MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x106>, /* SODIMM 54 */
+			<MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6	0x106>, /* SODIMM 56 */
+			<MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x106>; /* SODIMM 58 */
+	};
+
+	pinctrl_tpm_cs: tpmcsgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2	0x146>; /* SODIMM 64 */
+	};
+
+	pinctrl_tpm_irq: tpmirqgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14	0x141>; /* SODIMM 66 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-ivy.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-ivy.dts
new file mode 100644
index 000000000000..82b34a12ee2b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-ivy.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-ivy.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini on Ivy";
+	compatible = "toradex,verdin-imx8mm-nonwifi-ivy",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts
new file mode 100644
index 000000000000..1b1999f3a80e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini on Mallow";
+	compatible = "toradex,verdin-imx8mm-nonwifi-mallow",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-yavia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-yavia.dts
new file mode 100644
index 000000000000..c71825ecf2ea
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-yavia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini on Yavia Board";
+	compatible = "toradex,verdin-imx8mm-nonwifi-yavia",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-ivy.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-ivy.dts
new file mode 100644
index 000000000000..3369ba852b5c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-ivy.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-ivy.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini WB on Ivy";
+	compatible = "toradex,verdin-imx8mm-wifi-ivy",
+		     "toradex,verdin-imx8mm-wifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts
new file mode 100644
index 000000000000..2916145f31bb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini WB on Mallow";
+	compatible = "toradex,verdin-imx8mm-wifi-mallow",
+		     "toradex,verdin-imx8mm-wifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-yavia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-yavia.dts
new file mode 100644
index 000000000000..fe39de9310d6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-yavia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini WB on Yavia Board";
+	compatible = "toradex,verdin-imx8mm-wifi-yavia",
+		     "toradex,verdin-imx8mm-wifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-yavia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-yavia.dtsi
new file mode 100644
index 000000000000..763f069e8405
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-yavia.dtsi
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_yavia>;
+
+		/* SODIMM 52 - LD1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 54 - LD1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 56 - LD1_BLUE */
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 58 - LD2_RED */
+		led-3 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 60 - LD2_GREEN */
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 62 - LD2_BLUE */
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin yavia board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpios_ext_yavia>;
+};
+
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
+&hwmon_temp {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds_yavia: ledsyaviagrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0		0x106	/* SODIMM 52 */
+			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x106	/* SODIMM 54 */
+			MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6	0x106	/* SODIMM 56 */
+			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x106	/* SODIMM 58 */
+			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8	0x106	/* SODIMM 60 */
+			MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9	0x106	/* SODIMM 62 */
+		>;
+	};
+
+	pinctrl_gpios_ext_yavia: gpiosextyaviagrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2	0x106	/* SODIMM 64 */
+			MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14	0x106	/* SODIMM 66 */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index d1b4582f44c4..1594ce9182a5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -3,9 +3,10 @@
  * Copyright 2022 Toradex
  */
 
-#include "dt-bindings/phy/phy-imx8-pcie.h"
-#include "dt-bindings/pwm/pwm.h"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
 #include "imx8mm.dtsi"
+#include "imx8mm-overdrive.dtsi"
 
 / {
 	chosen {
@@ -17,25 +18,11 @@
 		rtc1 = &snvs_rtc;
 	};
 
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		brightness-levels = <0 45 63 88 119 158 203 255>;
-		default-brightness-level = <4>;
-		/* Verdin I2S_2_D_OUT (DSI_1_BKL_EN/DSI_1_BKL_EN_LVDS, SODIMM 46) */
-		enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2s_2_d_out_dsi_1_bkl_en>;
-		power-supply = <&reg_3p3v>;
-		/* Verdin PWM_3_DSI/PWM_3_DSI_LVDS (SODIMM 19) */
-		pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>;
-		status = "disabled";
-	};
-
 	/* Fixed clock dedicated to SPI CAN controller */
-	clk20m: oscillator {
+	clk40m: oscillator {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <20000000>;
+		clock-frequency = <40000000>;
 	};
 
 	gpio-keys {
@@ -53,6 +40,18 @@
 		};
 	};
 
+	hdmi_connector: hdmi-connector {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&i2c2>;
+		/* Verdin PWM_3_DSI (SODIMM 19) */
+		hpd-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		label = "hdmi";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwm_3_dsi_hpd_gpio>;
+		type = "a";
+		status = "disabled";
+	};
+
 	/* Carrier Board Supplies */
 	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
@@ -80,9 +79,10 @@
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
-		off-on-delay = <500000>;
+		off-on-delay-us = <500000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_eth>;
+		regulator-always-on;
 		regulator-boot-on;
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
@@ -90,6 +90,22 @@
 		startup-delay-us = <200000>;
 	};
 
+	/*
+	 * By default we enable CTRL_SLEEP_MOCI#, this is required to have
+	 * peripherals on the carrier board powered.
+	 * If more granularity or power saving is required this can be disabled
+	 * in the carrier board device tree files.
+	 */
+	reg_force_sleep_moci: regulator-force-sleep-moci {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "CTRL_SLEEP_MOCI#";
+	};
+
 	reg_usb_otg1_vbus: regulator-usb-otg1 {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -119,13 +135,26 @@
 		enable-active-high;
 		/* Verdin SD_1_PWR_EN (SODIMM 76) */
 		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-		off-on-delay = <100000>;
+		off-on-delay-us = <100000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
 		regulator-name = "+V3.3_SD";
-		startup-delay-us = <2000>;
+		startup-delay-us = <20000>;
+	};
+
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vsel>;
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <1800000>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		regulator-name = "PMIC_USDHC_VSELECT";
+		vin-supply = <&reg_nvcc_sd>;
 	};
 
 	reserved-memory {
@@ -168,15 +197,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -191,24 +220,31 @@
 	pinctrl-0 = <&pinctrl_ecspi2>;
 };
 
-/* Verdin CAN_1 (On-module) */
+/* On-module SPI */
 &ecspi3 {
 	#address-cells = <1>;
 	#size-cells = <0>;
-	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>, <&gpio4 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
+	pinctrl-0 = <&pinctrl_ecspi3>, <&pinctrl_tpm_spi_cs>;
 	status = "okay";
 
+	/* Verdin CAN_1 */
 	can1: can@0 {
 		compatible = "microchip,mcp251xfd";
-		clocks = <&clk20m>;
-		interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_FALLING>;
+		clocks = <&clk40m>;
+		interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_can1_int>;
 		reg = <0>;
 		spi-max-frequency = <8500000>;
 	};
+
+	verdin_som_tpm: tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 /* Verdin ETH_1 (On-module PHY) */
@@ -246,7 +282,7 @@
 			  "SODIMM_19",
 			  "",
 			  "",
-			  "",
+			  "PMIC_USDHC_VSELECT",
 			  "",
 			  "",
 			  "",
@@ -313,16 +349,6 @@
 			  "SODIMM_212",
 			  "SODIMM_151",
 			  "SODIMM_153";
-
-	ctrl-sleep-moci-hog {
-		gpio-hog;
-		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
-		gpios = <1 GPIO_ACTIVE_HIGH>;
-		line-name = "CTRL_SLEEP_MOCI#";
-		output-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
-	};
 };
 
 /* On-module I2C */
@@ -333,6 +359,7 @@
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
 	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
 	status = "okay";
 
 	pca9450: pmic@25 {
@@ -343,7 +370,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		reg = <0x25>;
-		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 
 		/*
 		 * The bootloader is expected to switch on the I2C level shifter for the TLA2024 ADC
@@ -367,8 +393,8 @@
 				nxp,dvs-standby-voltage = <850000>;
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-max-microvolt = <950000>;
-				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-min-microvolt = <805000>;
 				regulator-name = "On-module +VDD_ARM (BUCK2)";
 				regulator-ramp-delay = <3125>;
 			};
@@ -376,8 +402,8 @@
 			reg_vdd_dram: BUCK3 {
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-max-microvolt = <950000>;
-				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <805000>;
 				regulator-name = "On-module +VDD_GPU_VPU_DDR (BUCK3)";
 			};
 
@@ -416,7 +442,7 @@
 			reg_vdd_snvs: LDO2 {
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-max-microvolt = <900000>;
+				regulator-max-microvolt = <800000>;
 				regulator-min-microvolt = <800000>;
 				regulator-name = "On-module +V0.8_SNVS (LDO2)";
 			};
@@ -438,6 +464,7 @@
 			};
 
 			reg_nvcc_sd: LDO5 {
+				regulator-always-on;
 				regulator-max-microvolt = <3300000>;
 				regulator-min-microvolt = <1800000>;
 				regulator-name = "On-module +V3.3_1.8_SD (LDO5)";
@@ -450,11 +477,12 @@
 		reg = <0x32>;
 	};
 
-	adc@49 {
+	verdin_som_adc: adc@49 {
 		compatible = "ti,ads1015";
 		reg = <0x49>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		#io-channel-cells = <1>;
 
 		/* Verdin I2C_1 (ADC_4 - ADC_3) */
 		channel@0 {
@@ -514,7 +542,7 @@
 	};
 
 	eeprom@50 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 	};
@@ -522,12 +550,13 @@
 
 /* Verdin I2C_2_DSI */
 &i2c2 {
-	clock-frequency = <10000>;
+	clock-frequency = <400000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	pinctrl-1 = <&pinctrl_i2c2_gpio>;
 	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
 	status = "disabled";
 };
 
@@ -541,6 +570,7 @@
 	pinctrl-1 = <&pinctrl_i2c3_gpio>;
 	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
 };
 
 /* Verdin I2C_1 */
@@ -551,6 +581,7 @@
 	pinctrl-1 = <&pinctrl_i2c4_gpio>;
 	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
 
 	gpio_expander_21: gpio-expander@21 {
 		compatible = "nxp,pcal6416";
@@ -561,8 +592,8 @@
 		status = "disabled";
 	};
 
-	lvds_ti_sn65dsi83: bridge@2c {
-		compatible = "ti,sn65dsi83";
+	lvds_ti_sn65dsi84: bridge@2c {
+		compatible = "ti,sn65dsi84";
 		/* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */
 		/* Verdin GPIO_10_DSI (SODIMM 21) */
 		enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
@@ -583,7 +614,7 @@
 	hdmi_lontium_lt8912: hdmi@48 {
 		compatible = "lontium,lt8912b";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_10_dsi>, <&pinctrl_pwm_3_dsi_hpd_gpio>;
+		pinctrl-0 = <&pinctrl_gpio_10_dsi>;
 		reg = <0x48>;
 		/* Verdin GPIO_9_DSI (LT8912 INT, SODIMM 17, unused) */
 		/* Verdin GPIO_10_DSI (SODIMM 21) */
@@ -595,7 +626,7 @@
 		compatible = "atmel,maxtouch";
 		/*
 		 * Verdin GPIO_9_DSI
-		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused)
+		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI84 IRQ albeit currently unused)
 		 */
 		interrupt-parent = <&gpio3>;
 		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
@@ -603,7 +634,7 @@
 		pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>;
 		reg = <0x4a>;
 		/* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */
-		reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
 		status = "disabled";
 	};
 
@@ -616,7 +647,7 @@
 
 	/* EEPROM on display adapter (MIPI DSI Display Adapter) */
 	eeprom_display_adapter: eeprom@50 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 		status = "disabled";
@@ -624,7 +655,7 @@
 
 	/* EEPROM on carrier board */
 	eeprom_carrier_board: eeprom@57 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x57>;
 		status = "disabled";
@@ -638,9 +669,6 @@
 	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
 				 <&clk IMX8MM_SYS_PLL2_250M>;
 	assigned-clock-rates = <10000000>, <250000000>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
-		 <&clk IMX8MM_CLK_PCIE1_PHY>;
-	clock-names = "pcie", "pcie_aux", "pcie_bus";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie0>;
 	/* PCIE_1_RESET# (SODIMM 244) */
@@ -649,6 +677,7 @@
 
 &pcie_phy {
 	clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+	clock-names = "ref";
 	fsl,clkreq-unsupported;
 	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
 	fsl,tx-deemph-gen1 = <0x2d>;
@@ -724,7 +753,6 @@
 	adp-disable;
 	dr_mode = "otg";
 	hnp-disable;
-	over-current-active-low;
 	samsung,picophy-dc-vol-level-adjust = <7>;
 	samsung,picophy-pre-emp-curr-control = <3>;
 	srp-disable;
@@ -734,7 +762,6 @@
 /* Verdin USB_2 */
 &usbotg2 {
 	dr_mode = "host";
-	over-current-active-low;
 	samsung,picophy-dc-vol-level-adjust = <7>;
 	samsung,picophy-pre-emp-curr-control = <3>;
 	vbus-supply = <&reg_usb_otg2_vbus>;
@@ -745,6 +772,7 @@
 };
 
 &usbphynop2 {
+	power-domains = <&pgc_otg2>;
 	vcc-supply = <&reg_vdd_3v3>;
 };
 
@@ -771,6 +799,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
 	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
 };
 
 &wdog1 {
@@ -785,8 +814,7 @@
 	pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
 		    <&pinctrl_gpio3>, <&pinctrl_gpio4>,
 		    <&pinctrl_gpio7>, <&pinctrl_gpio8>,
-		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>,
-		    <&pinctrl_pmic_tpm_ena>;
+		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>;
 
 	pinctrl_can1_int: can1intgrp {
 		fsl,pins =
@@ -913,7 +941,7 @@
 	/* Verdin GPIO_9_DSI (pulled-up as active-low) */
 	pinctrl_gpio_9_dsi: gpio9dsigrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x146>;	/* SODIMM 17 */
+			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x1c6>;	/* SODIMM 17 */
 	};
 
 	/* Verdin GPIO_10_DSI (pulled-up as active-low) */
@@ -1088,7 +1116,7 @@
 	};
 
 	/* control signal for optional ATTPM20P or SE050 */
-	pinctrl_pmic_tpm_ena: pmictpmenagrp {
+	pinctrl_tpm_spi_cs: tpmspicsgrp {
 		fsl,pins =
 			<MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x106>;	/* PMIC_TPM_ENA */
 	};
@@ -1193,13 +1221,17 @@
 			<MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5		0x6>;	/* SODIMM 76 */
 	};
 
+	pinctrl_usdhc2_vsel: usdhc2vselgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4	0x10>; /* PMIC_USDHC_VSELECT */
+	};
+
 	/*
 	 * Note: Due to ERR050080 we use discrete external on-module resistors pulling-up to the
 	 * on-module +V3.3_1.8_SD (LDO5) rail and explicitly disable the internal pull-ups here.
 	 */
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x90>,	/* SODIMM 78 */
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x90>,	/* SODIMM 74 */
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x90>,	/* SODIMM 80 */
@@ -1210,7 +1242,6 @@
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x94>,
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x94>,
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x94>,
@@ -1221,7 +1252,6 @@
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x96>,
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x96>,
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x96>,
@@ -1233,7 +1263,6 @@
 	/* Avoid backfeeding with removed card power */
 	pinctrl_usdhc2_sleep: usdhc2slpgrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x0>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x0>,
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x0>,
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x0>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index afb90f59c83c..fc3cd639310e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -62,7 +62,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -83,7 +82,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -102,7 +100,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -121,7 +118,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -139,6 +135,7 @@
 		A53_L2: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
@@ -276,6 +273,7 @@
 		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_otg1>;
 	};
 
 	usbphynop2: usbphynop2 {
@@ -285,6 +283,7 @@
 		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_otg2>;
 	};
 
 	soc: soc@0 {
@@ -396,6 +395,7 @@
 						      "pll8k", "pll11k", "clkext3";
 					dmas = <&sdma2 24 25 0x80000000>;
 					dma-names = "rx";
+					#sound-dai-cells = <0>;
 					status = "disabled";
 				};
 
@@ -493,6 +493,8 @@
 				compatible = "fsl,imx8mm-tmu";
 				reg = <0x30260000 0x10000>;
 				clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
+				nvmem-cells = <&tmu_calib>;
+				nvmem-cell-names = "calib";
 				#thermal-sensor-cells = <0>;
 			};
 
@@ -547,8 +549,8 @@
 				reg = <0x30330000 0x10000>;
 			};
 
-			gpr: iomuxc-gpr@30340000 {
-				compatible = "fsl,imx8mm-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon";
+			gpr: syscon@30340000 {
+				compatible = "fsl,imx8mm-iomuxc-gpr", "syscon";
 				reg = <0x30340000 0x10000>;
 			};
 
@@ -560,22 +562,40 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mm_uid: unique-id@410 {
+				/*
+				 * The register address below maps to the MX8M
+				 * Fusemap Description Table entries this way.
+				 * Assuming
+				 *   reg = <ADDR SIZE>;
+				 * then
+				 *   Fuse Address = (ADDR * 4) + 0x400
+				 * Note that if SIZE is greater than 4, then
+				 * each subsequent fuse is located at offset
+				 * +0x10 in Fusemap Description Table (e.g.
+				 * reg = <0x4 0x8> describes fuses 0x410 and
+				 * 0x420).
+				 */
+				imx8mm_uid: unique-id@4 { /* 0x410-0x420 */
 					reg = <0x4 0x8>;
 				};
 
-				cpu_speed_grade: speed-grade@10 {
+				cpu_speed_grade: speed-grade@10 { /* 0x440 */
 					reg = <0x10 4>;
 				};
 
-				fec_mac_address: mac-address@90 {
+				tmu_calib: calib@3c { /* 0x4f0 */
+					reg = <0x3c 4>;
+				};
+
+				fec_mac_address: mac-address@90 { /* 0x640 */
 					reg = <0x90 6>;
 				};
 			};
 
-			anatop: anatop@30360000 {
-				compatible = "fsl,imx8mm-anatop", "syscon";
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mm-anatop";
 				reg = <0x30360000 0x10000>;
+				#clock-cells = <1>;
 			};
 
 			snvs: snvs@30370000 {
@@ -612,6 +632,8 @@
 			clk: clock-controller@30380000 {
 				compatible = "fsl,imx8mm-ccm";
 				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 					 <&clk_ext3>, <&clk_ext4>;
@@ -623,7 +645,6 @@
 						<&clk IMX8MM_CLK_AUDIO_AHB>,
 						<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
 						<&clk IMX8MM_SYS_PLL3>,
-						<&clk IMX8MM_VIDEO_PLL1>,
 						<&clk IMX8MM_AUDIO_PLL1>;
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
 							 <&clk IMX8MM_ARM_PLL_OUT>,
@@ -633,7 +654,6 @@
 							<400000000>,
 							<400000000>,
 							<750000000>,
-							<594000000>,
 							<393216000>;
 			};
 
@@ -674,13 +694,11 @@
 					pgc_otg1: power-domain@2 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MM_POWER_DOMAIN_OTG1>;
-						power-domains = <&pgc_hsiomix>;
 					};
 
 					pgc_otg2: power-domain@3 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MM_POWER_DOMAIN_OTG2>;
-						power-domains = <&pgc_hsiomix>;
 					};
 
 					pgc_gpumix: power-domain@4 {
@@ -897,6 +915,8 @@
 					clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
 						 <&clk IMX8MM_CLK_UART2_ROOT>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 			};
@@ -1098,6 +1118,64 @@
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;
 
+			lcdif: lcdif@32e00000 {
+				compatible = "fsl,imx8mm-lcdif", "fsl,imx6sx-lcdif";
+				reg = <0x32e00000 0x10000>;
+				clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>,
+					 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				assigned-clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>,
+						  <&clk IMX8MM_CLK_DISP_AXI>,
+						  <&clk IMX8MM_CLK_DISP_APB>;
+				assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>,
+							 <&clk IMX8MM_SYS_PLL2_1000M>,
+							 <&clk IMX8MM_SYS_PLL1_800M>;
+				assigned-clock-rates = <24000000>, <500000000>, <200000000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>;
+				status = "disabled";
+
+				port {
+					lcdif_to_dsim: endpoint {
+						remote-endpoint = <&dsim_from_lcdif>;
+					};
+				};
+			};
+
+			mipi_dsi: dsi@32e10000 {
+				compatible = "fsl,imx8mm-mipi-dsim";
+				reg = <0x32e10000 0x400>;
+				clocks = <&clk IMX8MM_CLK_DSI_CORE>,
+					 <&clk IMX8MM_CLK_DSI_PHY_REF>;
+				clock-names = "bus_clk", "sclk_mipi";
+				assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dsim_from_lcdif: endpoint {
+							remote-endpoint = <&lcdif_to_dsim>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_dsi_out: endpoint {
+						};
+					};
+				};
+			};
+
 			csi: csi@32e20000 {
 				compatible = "fsl,imx8mm-csi", "fsl,imx7-csi";
 				reg = <0x32e20000 0x1000>;
@@ -1145,10 +1223,9 @@
 				compatible = "fsl,imx8mm-mipi-csi2";
 				reg = <0x32e30000 0x1000>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>,
-						  <&clk IMX8MM_CLK_CSI1_PHY_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
-							  <&clk IMX8MM_SYS_PLL2_1000M>;
+				assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>;
+
 				clock-frequency = <333000000>;
 				clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
 					 <&clk IMX8MM_CLK_CSI1_ROOT>,
@@ -1177,41 +1254,41 @@
 			};
 
 			usbotg1: usb@32e40000 {
-				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
+				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x32e40000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
-				clock-names = "usb1_ctrl_root_clk";
 				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
-				power-domains = <&pgc_otg1>;
+				power-domains = <&pgc_hsiomix>;
 				status = "disabled";
 			};
 
 			usbmisc1: usbmisc@32e40200 {
-				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
+				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+					     "fsl,imx6q-usbmisc";
 				#index-cells = <1>;
 				reg = <0x32e40200 0x200>;
 			};
 
 			usbotg2: usb@32e50000 {
-				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
+				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x32e50000 0x200>;
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
-				clock-names = "usb1_ctrl_root_clk";
 				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				phys = <&usbphynop2>;
 				fsl,usbmisc = <&usbmisc2 0>;
-				power-domains = <&pgc_otg2>;
+				power-domains = <&pgc_hsiomix>;
 				status = "disabled";
 			};
 
 			usbmisc2: usbmisc@32e50200 {
-				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
+				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+					     "fsl,imx6q-usbmisc";
 				#index-cells = <1>;
 				reg = <0x32e50200 0x200>;
 			};
@@ -1238,16 +1315,15 @@
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 			#dma-cells = <1>;
 			dma-channels = <4>;
 			clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
 		};
 
-		gpmi: nand-controller@33002000{
+		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -1268,8 +1344,8 @@
 			#size-cells = <2>;
 			device_type = "pci";
 			bus-range = <0x00 0xff>;
-			ranges =  <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */
-				   0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
+				 <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
 			num-lanes = <1>;
 			num-viewport = <4>;
 			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
@@ -1282,12 +1358,42 @@
 					<0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,max-link-speed = <2>;
 			linux,pci-domain = <0>;
+			clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
+				 <&clk IMX8MM_CLK_PCIE1_PHY>,
+				 <&clk IMX8MM_CLK_PCIE1_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_aux";
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "apps", "turnoff";
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			status = "disabled";
+		};
+
+		pcie0_ep: pcie-ep@33800000 {
+			compatible = "fsl,imx8mm-pcie-ep";
+			reg = <0x33800000 0x100000>,
+			      <0x18000000 0x8000000>,
+			      <0x33900000 0x100000>,
+			      <0x33b00000 0x100000>;
+			reg-names = "dbi", "addr_space", "dbi2", "atu";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			fsl,max-link-speed = <2>;
+			clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
+				 <&clk IMX8MM_CLK_PCIE1_PHY>,
+				 <&clk IMX8MM_CLK_PCIE1_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_aux";
 			power-domains = <&pgc_pcie>;
 			resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
 				 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
 			reset-names = "apps", "turnoff";
 			phys = <&pcie_phy>;
 			phy-names = "pcie-phy";
+			num-ib-windows = <4>;
+			num-ob-windows = <4>;
 			status = "disabled";
 		};
 
@@ -1303,7 +1409,7 @@
 			assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
 					  <&clk IMX8MM_GPU_PLL_OUT>;
 			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
-			assigned-clock-rates = <0>, <1000000000>;
+			assigned-clock-rates = <0>, <800000000>;
 			power-domains = <&pgc_gpu>;
 		};
 
@@ -1318,7 +1424,7 @@
 			assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
 					  <&clk IMX8MM_GPU_PLL_OUT>;
 			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
-			assigned-clock-rates = <0>, <1000000000>;
+			assigned-clock-rates = <0>, <800000000>;
 			power-domains = <&pgc_gpu>;
 		};
 
@@ -1361,6 +1467,7 @@
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>, /* GIC Dist */
 			      <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
index 9e82069c941f..77d14ea459e5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
@@ -4,6 +4,12 @@
  */
 
 / {
+	dmic_codec: dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <1>;
+		#sound-dai-cells = <0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -34,6 +40,20 @@
 		};
 	};
 
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	reg_audio: regulator-audio {
 		compatible = "regulator-fixed";
 		regulator-name = "3v3_aud";
@@ -43,6 +63,17 @@
 		enable-active-high;
 	};
 
+	reg_camera: regulator-camera {
+		compatible = "regulator-fixed";
+		regulator-name = "mipi_pwr";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>;
+		regulator-always-on;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vsd_3v3";
@@ -63,25 +94,53 @@
 		enable-active-high;
 	};
 
-	sound {
-		compatible = "fsl,imx-audio-wm8962";
-		model = "wm8962-audio";
-		audio-cpu = <&sai3>;
-		audio-codec = <&wm8962>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC";
+	sound-dmic {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "dmic";
+		simple-audio-card,format = "pdm";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+
+		dailink_master: simple-audio-card,cpu {
+			sound-dai = <&micfil>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&dmic_codec>;
+		};
+	};
+
+	sound-wm8962 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8962";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets = "Headphone", "Headphones",
+					    "Microphone", "Headset Mic",
+					    "Speaker", "Speaker";
+		simple-audio-card,routing = "Headphones", "HPOUTL",
+					    "Headphones", "HPOUTR",
+					    "Speaker", "SPKOUTL",
+					    "Speaker", "SPKOUTR",
+					    "Headset Mic", "MICBIAS",
+					    "IN3R", "Headset Mic";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8962>;
+			clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+			frame-master;
+			bitclock-master;
+		};
 	};
 };
 
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_espi2>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	eeprom@0 {
@@ -96,6 +155,38 @@
 	};
 };
 
+&i2c2 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	camera@10 {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x10>;
+		clocks = <&clk IMX8MN_CLK_CLKO1>;
+		clock-names = "xclk";
+		assigned-clocks = <&clk IMX8MN_CLK_CLKO1>;
+		assigned-clock-parents = <&clk IMX8MN_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		AVDD-supply = <&reg_camera>;  /* 2.8v */
+		DVDD-supply = <&reg_1v5>;
+		DOVDD-supply = <&reg_1v8>;
+		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+
+		port {
+			/* MIPI CSI-2 bus endpoint */
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
 &i2c4 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -142,14 +233,41 @@
 			0x0000 /* 4:FN_DMICCDAT */
 			0x0000 /* 5:Default */
 		>;
+		#sound-dai-cells = <0>;
 	};
 };
 
+&isi {
+	status = "okay";
+};
+
 &easrc {
 	fsl,asrc-rate = <48000>;
 	status = "okay";
 };
 
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_csi_in: endpoint {
+				remote-endpoint = <&ov5640_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&micfil {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX8MN_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <49152000>;
+	status = "okay";
+};
+
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
@@ -202,7 +320,7 @@
 			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
 			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
 			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
-			MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x41
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x41
 		>;
 	};
 
@@ -226,12 +344,27 @@
 		>;
 	};
 
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MN_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59
+		>;
+	};
+
 	pinctrl_pcal6414: pcal6414-gpiogrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x19
 		>;
 	};
 
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI5_RXC_PDM_CLK	0xd6
+			MX8MN_IOMUXC_SAI5_RXD0_PDM_BIT_STREAM0	0xd6
+		>;
+	};
+
 	pinctrl_reg_usb_otg: reg-otggrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29     0x19
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
index 1392ce02587b..37fc5ed98d7f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
@@ -16,4 +16,136 @@
 	chosen {
 		stdout-path = &uart2;
 	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
+	reg_hdmi: regulator-hdmi-dvdd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_hdmi>;
+		regulator-name = "hdmi_pwr_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <70000>;
+		regulator-always-on;
+	};
+
+	sound-hdmi {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sound-hdmi";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai5>;
+			system-clock-direction-out;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&adv_bridge>;
+		};
+	};
+};
+
+&i2c2 {
+	adv_bridge: hdmi@3d {
+		compatible = "adi,adv7535";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hdmi_bridge>;
+		reg = <0x3d>, <0x3e>, <0x3c>, <0x3f>;
+		reg-names = "main", "edid", "cec", "packet";
+		adi,dsi-lanes = <4>;
+		avdd-supply = <&reg_hdmi>;
+		a2vdd-supply = <&reg_hdmi>;
+		dvdd-supply = <&reg_hdmi>;
+		pvdd-supply = <&reg_hdmi>;
+		v1p2-supply = <&reg_hdmi>;
+		v3p3-supply = <&reg_hdmi>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		#sound-dai-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <20000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7535_in>;
+			};
+		};
+	};
+};
+
+&sai5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&clk IMX8MN_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	#sound-dai-cells = <0>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_hdmi_bridge: hdmibridgegrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_reg_hdmi: reghdmigrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11              0x16
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0	0xd6
+			MX8MN_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK	0xd6
+			MX8MN_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC	0xd6
+		>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
index 1133cded9be2..917b7d0007a7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -3,6 +3,8 @@
  * Copyright 2020 Compass Electronics Group, LLC
  */
 
+#include "imx8mn-overdrive.dtsi"
+
 / {
 	aliases {
 		rtc0 = &rtc;
@@ -55,15 +57,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-800M {
+		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 		};
 	};
@@ -86,6 +88,9 @@
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
@@ -121,7 +126,7 @@
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		rohm,reset-snvs-powered;
 		#clock-cells = <0>;
-		clocks = <&osc_32k 0>;
+		clocks = <&osc_32k>;
 		clock-output-names = "clk-32k-out";
 
 		regulators {
@@ -240,6 +245,12 @@
 	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		quartz-load-femtofarads = <12500>;
+		wakeup-source;
 	};
 };
 
@@ -278,7 +289,7 @@
 	mmc-pwrseq = <&usdhc1_pwrseq>;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		pinctrl-names = "default";
@@ -294,6 +305,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
@@ -323,6 +336,7 @@
 			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
 			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
 			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10             0x146
 			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
 		>;
 	};
@@ -358,6 +372,12 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x146
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
index c11895d9d582..d20393c2d901 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "imx8mn.dtsi"
+#include "imx8mn-bsh-smm-s2-display.dtsi"
 
 / {
 	chosen {
@@ -92,7 +93,7 @@
 		rohm,reset-snvs-powered;
 
 		#clock-cells = <0>;
-		clocks = <&osc_32k 0>;
+		clocks = <&osc_32k>;
 		clock-output-names = "clk-32k-out";
 
 		regulators {
@@ -264,7 +265,7 @@
 	non-removable;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		compatible = "brcm,bcm4329-fmac";
 		reg = <1>;
 		pinctrl-names = "default";
@@ -341,7 +342,7 @@
 		>;
 	};
 
-	pinctrl_pmic: pmicirq {
+	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x040
 		>;
@@ -381,7 +382,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK			0x094
 			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD			0x0d4
@@ -392,7 +393,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK			0x096
 			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD			0x0d6
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
new file mode 100644
index 000000000000..98dec3c42060
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 BSH
+ */
+
+/ {
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer-panel0 {
+			compatible = "simple-framebuffer";
+			clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>, /* lcdif */
+				 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+				 <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+				 <&clk IMX8MN_VIDEO_PLL1>,
+				 <&clk IMX8MN_CLK_DISP_AXI_ROOT>, /* pgc_dispmix */
+				 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+				 <&clk IMX8MN_CLK_DISP_AXI>,
+				 <&clk IMX8MN_CLK_DISP_APB>,
+				 <&clk IMX8MN_SYS_PLL2_1000M>,
+				 <&clk IMX8MN_SYS_PLL1_800M>,
+				 <&clk IMX8MN_CLK_DSI_CORE>, /* mipi_disi */
+				 <&clk IMX8MN_CLK_DSI_PHY_REF>;
+
+			power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_LCDIF>,
+					<&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_DSI>;
+			dvdd-supply = <&reg_3v3_dvdd>;
+			avdd-supply = <&reg_v3v3_avdd>;
+			status = "disabled";
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 700000 0>;	/* 700000 ns = 1337Hz */
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <50>;
+		status = "okay";
+	};
+
+	reg_3v3_dvdd: regulator-3v3-O3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dvdd>;
+		regulator-name = "3v3-dvdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_v3v3_avdd: regulator-3v3-O2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_avdd>;
+		regulator-name = "3v3-avdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_bl>;
+	status = "okay";
+};
+
+&lcdif {
+	assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
+	assigned-clock-rates = <594000000>;
+	status = "okay";
+};
+
+&pgc_dispmix {
+	assigned-clocks = <&clk IMX8MN_CLK_DISP_AXI>, <&clk IMX8MN_CLK_DISP_APB>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>, <&clk IMX8MN_SYS_PLL1_800M>;
+	assigned-clock-rates = <500000000>, <200000000>;
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,esc-clock-frequency = <20000000>;
+	samsung,pll-clock-frequency = <12000000>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "sharp,ls068b3sx02", "syna,r63353";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		reg = <0>;
+
+		backlight = <&backlight>;
+		dvdd-supply = <&reg_3v3_dvdd>;
+		avdd-supply = <&reg_v3v3_avdd>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_avdd: avddgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x16	/* VDD 3V3_VO2 */
+		>;
+	};
+
+	/* This is for both PWM and voltage regulators for display */
+	pinctrl_bl: blgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT	0x16
+		>;
+	};
+
+	pinctrl_dvdd: dvddgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x16	/* VDD 3V3_VO3 */
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29	0x16	/* panel reset */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts
index 33f98582eace..11a1ba5bfdb7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts
@@ -21,12 +21,11 @@
 &gpmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
 	status = "okay";
 };
 
 &iomuxc {
-	pinctrl_gpmi_nand: gpmi-nand {
+	pinctrl_gpmi_nand: gpminandgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_NAND_ALE_RAWNAND_ALE		0x00000096
 			MX8MN_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B		0x00000096
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
index fbbb3367037b..475cbf9e0d1e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
@@ -64,7 +64,6 @@
 		DVDD-supply = <&buck5_reg>;
 		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		ai31xx-micbias-vg = <MICBIAS_AVDDV>;
-		clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
 	};
 };
 
@@ -136,7 +135,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK			0x40000094
 			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD			0x0d4
@@ -152,7 +151,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK			0x40000096
 			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD			0x0d6
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts
index 000e2c0596df..d25032e3ceab 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts
@@ -112,3 +112,19 @@
 		};
 	};
 };
+
+&i2c2 {
+	hdmi@3d {
+		avdd-supply = <&buck5>;
+		dvdd-supply = <&buck5>;
+		pvdd-supply = <&buck5>;
+		a2vdd-supply = <&buck5>;
+		v1p2-supply = <&buck5>;
+	};
+};
+
+&i2c3 {
+	camera@3c {
+		DOVDD-supply = <&buck5>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index d8ce217c6016..6d85a0b052c9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -35,15 +35,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-600M {
+		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 		};
 	};
@@ -60,7 +60,7 @@
 		rohm,reset-snvs-powered;
 
 		#clock-cells = <0>;
-		clocks = <&osc_32k 0>;
+		clocks = <&osc_32k>;
 		clock-output-names = "clk-32k-out";
 
 		regulators {
@@ -158,3 +158,19 @@
 		};
 	};
 };
+
+&i2c2 {
+	hdmi@3d {
+		avdd-supply = <&buck5_reg>;
+		dvdd-supply = <&buck5_reg>;
+		pvdd-supply = <&buck5_reg>;
+		a2vdd-supply = <&buck5_reg>;
+		v1p2-supply = <&buck5_reg>;
+	};
+};
+
+&i2c3 {
+	camera@3c {
+		DOVDD-supply = <&buck5_reg>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts
new file mode 100644
index 000000000000..6f9b82958b96
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 DimOnOff
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn-var-som-symphony.dts"
+
+/ {
+	model = "DimOnOff Gateway EVK board";
+	compatible = "dimonoff,gateway-evk", "variscite,var-som-mx8mn",
+		     "fsl,imx8mn";
+
+	/*
+	 * U30 FPF2193 regulator.
+	 * Source = BASE_PER_3V3 = SOM_3V3 (COM pin 49).
+	 */
+	reg_disp_3v3: regulator-disp-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "Display 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-enter {
+			label = "enter";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			wakeup-source;
+		};
+	};
+
+	/* Bourns PEC12R rotary encoder, 24 steps. */
+	rotary: rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rotary>;
+		gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, /* A */
+			<&gpio5 13 GPIO_ACTIVE_LOW>; /* B */
+		linux,axis = <0>; /* REL_X */
+		rotary-encoder,encoding = "gray";
+		rotary-encoder,relative-axis;
+	};
+};
+
+/* Disable Asynchronous Sample Rate Converter (audio) */
+&easrc {
+	status = "disabled";
+};
+
+&ecspi1 {
+	/* Resistive touch controller */
+	/delete-node/ touchscreen@0;
+};
+
+&gpu {
+	status = "disabled";
+};
+
+&i2c2 {
+	adc@48 {
+		compatible = "ti,ads7924";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adc>;
+		vref-supply = <&reg_disp_3v3>;
+		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 {
+			reg = <0>;
+			label = "Pot0";
+		};
+		channel@1 {
+			reg = <1>;
+			label = "Pot1";
+		};
+		channel@2 {
+			reg = <2>;
+			label = "Pot2";
+		};
+		channel@3 {
+			reg = <3>;
+			label = "Pot3";
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+		reset-source; /* For watchdog. */
+	};
+
+	rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reset-source; /* For watchdog. */
+		interrupt-parent = <&gpio5>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>; /* J17.6 on EVK */
+	};
+};
+
+&i2c3 {
+	touchscreen@38 {
+		status = "disabled";
+	};
+
+	codec@1a {
+		status = "disabled";
+	};
+
+	/* DS1337 RTC module */
+	rtc@68 {
+		status = "disabled";
+	};
+};
+
+&sai5 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8	0xc6
+		>;
+	};
+
+	pinctrl_rotary: rotarygrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_MISO_GPIO5_IO12	0x00000156
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x00000156
+		>;
+	};
+
+	pinctrl_adc: adcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x00000156
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_GPIO5_IO10	0x00000156
+			MX8MN_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x00000156
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
index 4eb467df5ba7..41330210a05f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
@@ -40,13 +40,14 @@
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 
 		regulators {
-			buck1: BUCK1{
+			buck1: BUCK1 {
 				regulator-name = "VDD_SOC";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <950000>;
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <3125>;
+				nxp,dvs-standby-voltage = <750000>;
 			};
 
 			buck2: BUCK2 {
@@ -56,11 +57,9 @@
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <3125>;
-				nxp,dvs-run-voltage = <950000>;
-				nxp,dvs-standby-voltage = <850000>;
 			};
 
-			buck4: BUCK4{
+			buck4: BUCK4 {
 				regulator-name = "VDD_3V3";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -68,7 +67,7 @@
 				regulator-always-on;
 			};
 
-			buck5: BUCK5{
+			buck5: BUCK5 {
 				regulator-name = "VDD_1V8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -126,3 +125,19 @@
 		};
 	};
 };
+
+&i2c2 {
+	hdmi@3d {
+		avdd-supply = <&buck5>;
+		dvdd-supply = <&buck5>;
+		pvdd-supply = <&buck5>;
+		a2vdd-supply = <&buck5>;
+		v1p2-supply = <&buck5>;
+	};
+};
+
+&i2c3 {
+	camera@3c {
+		DOVDD-supply = <&buck5>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 261c36540079..145355ff91b4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -23,6 +23,18 @@
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
 	memory@40000000 {
 		device_type = "memory";
 		reg = <0x0 0x40000000 0 0x80000000>;
@@ -36,9 +48,31 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <12000>;
 		enable-active-high;
 	};
 
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vddext_3v3: regulator-vddext-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDEXT_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
@@ -58,8 +92,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_wlf>;
 		wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
-		clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
-		clock-names = "mclk";
 	};
 
 	sound-bt-sco {
@@ -92,12 +124,35 @@
 			"Line Out Jack", "LINEVOUTR";
 	};
 
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_in: spdif-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "imx-spdif";
-		spdif-controller = <&spdif1>;
-		spdif-out;
-		spdif-in;
+		audio-cpu = <&spdif1>;
+		audio-codec = <&spdif_out>, <&spdif_in>;
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			link-name = "micfil hifi";
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
 	};
 };
 
@@ -159,12 +214,46 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
+	hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		adi,dsi-lanes = <4>;
+		v3p3-supply = <&reg_vddext_3v3>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+
+		};
+	};
+
 	ptn5110: tcpc@50 {
-		compatible = "nxp,ptn5110";
+		compatible = "nxp,ptn5110", "tcpci";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec1>;
 		reg = <0x50>;
@@ -172,12 +261,6 @@
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		status = "okay";
 
-		port {
-			typec1_dr_sw: endpoint {
-				remote-endpoint = <&usb1_drd_sw>;
-			};
-		};
-
 		typec1_con: connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
@@ -189,14 +272,23 @@
 				     PDO_VAR(5000, 20000, 3000)>;
 			op-sink-microwatt = <15000000>;
 			self-powered;
+
+			port {
+				typec1_dr_sw: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
 		};
 	};
 };
 
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 19 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
 	pca6416: gpio@20 {
@@ -205,6 +297,77 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_camera>;
+		clocks = <&clk IMX8MN_CLK_CLKO1>;
+		clock-names = "xclk";
+		assigned-clocks = <&clk IMX8MN_CLK_CLKO1>;
+		assigned-clock-parents = <&clk IMX8MN_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		AVDD-supply = <&reg_1v8>;
+		DVDD-supply = <&reg_1v5>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&imx8mn_mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&isi {
+	status = "okay";
+};
+
+&micfil {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX8MN_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <196608000>;
+	status = "okay";
+};
+
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		port@0 {
+			imx8mn_mipi_csi_in: endpoint {
+				remote-endpoint = <&ov5640_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7535_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
 };
 
 &sai2 {
@@ -224,6 +387,11 @@
 	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
 	assigned-clock-rates = <24576000>;
 	fsl,sai-mclk-direction-output;
+	clocks = <&clk IMX8MN_CLK_SAI3_IPG>, <&clk IMX8MN_CLK_DUMMY>,
+		<&clk IMX8MN_CLK_SAI3_ROOT>, <&clk IMX8MN_CLK_DUMMY>,
+		<&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_AUDIO_PLL1_OUT>,
+		<&clk IMX8MN_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
 	status = "okay";
 };
 
@@ -240,6 +408,15 @@
 	status = "okay";
 };
 
+&uart1 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MN_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
 &uart2 { /* console */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
@@ -255,6 +432,10 @@
 	status = "okay";
 };
 
+&usbphynop1 {
+	wakeup-source;
+};
+
 &usbotg1 {
 	dr_mode = "otg";
 	hnp-disable;
@@ -306,6 +487,14 @@
 };
 
 &iomuxc {
+	pinctrl_camera: cameragrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MN_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC		0x3
@@ -369,6 +558,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16	0x1c3
+			MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17	0x1c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
@@ -376,6 +572,25 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18	0x1c3
+			MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19	0x1c3
+		>;
+	};
+
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI5_MCLK_SAI5_MCLK	0xd6
+			MX8MN_IOMUXC_SAI5_RXC_PDM_CLK		0xd6
+			MX8MN_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC	0xd6
+			MX8MN_IOMUXC_SAI5_RXD0_PDM_BIT_STREAM0	0xd6
+			MX8MN_IOMUXC_SAI5_RXD1_PDM_BIT_STREAM1	0xd6
+			MX8MN_IOMUXC_SAI5_RXD2_PDM_BIT_STREAM2	0xd6
+			MX8MN_IOMUXC_SAI5_RXD3_PDM_BIT_STREAM3	0xd6
+		>;
+	};
+
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x141
@@ -419,6 +634,15 @@
 		>;
 	};
 
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi
new file mode 100644
index 000000000000..5d03fb893e90
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&gpu {
+	assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE>,
+			  <&clk IMX8MN_CLK_GPU_SHADER>,
+			  <&clk IMX8MN_CLK_GPU_AXI>,
+			  <&clk IMX8MN_CLK_GPU_AHB>,
+			  <&clk IMX8MN_GPU_PLL>;
+	assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
+				  <&clk IMX8MN_GPU_PLL_OUT>,
+				  <&clk IMX8MN_SYS_PLL1_800M>,
+				  <&clk IMX8MN_SYS_PLL1_800M>;
+	assigned-clock-rates = <600000000>,
+			       <600000000>,
+			       <800000000>,
+			       <400000000>,
+			       <1200000000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts b/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts
new file mode 100644
index 000000000000..ea1855171fb0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 DimOnOff
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn-var-som.dtsi"
+
+/ {
+	model = "RVE gateway";
+	compatible = "rve,gateway", "variscite,var-som-mx8mn", "fsl,imx8mn";
+
+	crystal_duart_24m: crystal-duart-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-enter {
+			label = "enter";
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+		};
+
+		key-exit {
+			label = "exit";
+			gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ESC>;
+		};
+	};
+
+	lcd {
+		compatible = "hit,hd44780";
+		display-height-chars = <2>;
+		display-width-chars = <20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd>;
+		data-gpios = <&gpio5  1 GPIO_ACTIVE_HIGH>,
+			     <&gpio1  6 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 14 GPIO_ACTIVE_HIGH>,
+			     <&gpio4 28 GPIO_ACTIVE_HIGH>,
+			     <&gpio5 24 GPIO_ACTIVE_HIGH>,
+			     <&gpio5  2 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 12 GPIO_ACTIVE_HIGH>,
+			     <&gpio5 25 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
+		rs-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		rw-gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* Bourns PEC12R rotary encoder, 24 steps. */
+	rotary: rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rotary>;
+		gpios = <&gpio1  5 GPIO_ACTIVE_LOW>, /* A */
+			<&gpio3 21 GPIO_ACTIVE_LOW>; /* B */
+		linux,axis = <0>; /* REL_X */
+		rotary-encoder,encoding = "gray";
+		rotary-encoder,relative-axis;
+	};
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+
+	duart1: serial@0 {
+		compatible = "nxp,sc16is752";
+		reg = <0>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+		spi-max-frequency = <4000000>;
+		clocks = <&crystal_duart_24m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "RADIO0", "RADIO1", "RADIO2", "RADIO3",
+				  "RADIO4", "RADIO_RESET", "TP12", "TP11";
+		linux,rs485-enabled-at-boot-time;
+		rs485-rts-active-low;
+	};
+
+	/delete-node/ touchscreen@0;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	/delete-property/ dmas;
+	/delete-property/ dma-names;
+	status = "okay";
+
+	duart2: serial@0 {
+		compatible = "nxp,sc16is752";
+		reg = <0>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+		spi-max-frequency = <4000000>;
+		clocks = <&crystal_duart_24m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED_B_USER", "LED_R_USER", "LED_G_USER",
+				  "GPIO_EXT3", "GPIO_EXT2", "GPIO_EXT1",
+				  "GPIO_EXT0", "TP13";
+		linux,rs485-enabled-at-boot-time;
+		rs485-rts-active-low;
+	};
+};
+
+/* Configure PWM pins in GPIO mode: */
+&gpio5 {
+	gpio-line-names = "", "", "", "PWM3", "PWM2", "PWM1";
+};
+
+&gpu {
+	status = "disabled";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	/* Carrier board EEPROM */
+	eeprom_cb: eeprom@56 {
+		compatible = "atmel,24c04";
+		reg = <0x56>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3p3v>;
+	};
+
+	lm75: sensor@48 {
+		compatible = "st,stlm75";
+		reg = <0x48>;
+		vs-supply = <&reg_3p3v>;
+	};
+
+	mcp7940: rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&i2c3 {
+	codec@1a {
+		status = "disabled";
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pcf8574_1: gpio@38 {
+		compatible = "nxp,pcf8574";
+		reg = <0x38>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED_B_COMM3", "LED_R_COMM3", "LED_G_COMM3",
+				  "TP14", "TP15", "LED_G_COMM4", "LED_R_COMM4",
+				  "LED_B_COMM4";
+	};
+
+	pcf8574_2: gpio@39 {
+		compatible = "nxp,pcf8574";
+		reg = <0x39>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED_B_COMM2", "LED_G_COMM2", "LED_B_COMM1",
+				  "LED_R_COMM2", "LED_R_COMM1", "LED_G_COMM1",
+				  "TP16", "TP17";
+	};
+};
+
+/* Bluetooth */
+&uart2 {
+	status = "disabled";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* SD interface on expansion connector. */
+&usdhc2 {
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x13
+			MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x13
+			MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x13
+			MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x13 /* SS0 */
+			MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x13 /* SC16 IRQ */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x13
+			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x13
+			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x13
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x13 /* SS0 */
+			MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20	0x13 /* SC16 IRQ */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1	0xc6 /* Enter */
+			MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23	0xc6 /* Exit */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_TXD_GPIO5_IO1		0x00000156 /* D0 */
+			MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x00000156 /* D1 */
+			MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x00000156 /* D2 */
+			MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x00000156 /* D3 */
+			MX8MN_IOMUXC_UART2_RXD_GPIO5_IO24	0x00000156 /* D4 */
+			MX8MN_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x00000156 /* D5 */
+			MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x00000156 /* D6 */
+			MX8MN_IOMUXC_UART2_TXD_GPIO5_IO25	0x00000156 /* D7 */
+			MX8MN_IOMUXC_UART1_TXD_GPIO5_IO23	0x00000156 /* E */
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x00000156 /* RS */
+			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x00000156 /* R/W */
+		>;
+	};
+
+	pinctrl_rotary: rotarygrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x00000156 /* A */
+			MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x00000156 /* B */
+		>;
+	};
+
+	/* Override Card Detect function GPIO value (GPIO1_IO10) from SOM: */
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtso b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtso
new file mode 100644
index 000000000000..29235e390a5d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtso
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&dsi_lvds_bridge {
+	status = "okay";
+};
+
+&expander0 {
+	dsi-mux-oe-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "DSI_MUX_OE#";
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	status = "okay";
+};
+
+&panel {
+	compatible = "tianma,tm070jvhg33";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso
new file mode 100644
index 000000000000..1f2a0fe70a0a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mn-pinfunc.h"
+
+&{/} {
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X19";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_connector>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+	};
+};
+
+/*
+ * rst_usb_hub_hog and sel_usb_hub_hog have property 'output-high',
+ * dt overlay don't support /delete-property/. Both 'output-low' and
+ * 'output-high' will be exist under hog nodes if overlay file set
+ * 'output-low'. Workaround is disable these hog and create new hog with
+ * 'output-low'.
+ */
+
+&rst_usb_hub_hog {
+	status = "disabled";
+};
+
+&expander0 {
+	rst-usb-low-hub-hog {
+		gpio-hog;
+		gpios = <13 0>;
+		output-low;
+		line-name = "RST_USB_HUB#";
+	};
+};
+
+&sel_usb_hub_hog {
+	status = "disabled";
+};
+
+&gpio2 {
+	sel-usb-low-hub-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	/delete-property/ disable-over-current;
+	over-current-active-low;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_usb1_connector: usb1-connectorgrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x1c0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
index 3f1e49bfe38f..d7f7f9aafb7d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
@@ -11,6 +11,7 @@
 / {
 	model = "TQ-Systems GmbH i.MX8MN TQMa8MxNL on MBa8Mx";
 	compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
+	chassis-type = "embedded";
 
 	aliases {
 		eeprom0 = &eeprom3;
@@ -40,7 +41,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0hub_sel>;
 
-	sel-usb-hub-hog {
+	sel_usb_hub_hog: sel-usb-hub-hog {
 		gpio-hog;
 		gpios = <1 GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -63,6 +64,11 @@
 	};
 };
 
+&mipi_dsi {
+	samsung,burst-clock-frequency = <891000000>;
+	samsung,esc-clock-frequency = <20000000>;
+};
+
 &sai3 {
 	assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
 	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
@@ -73,6 +79,10 @@
 		 <&clk IMX8MN_AUDIO_PLL2_OUT>;
 };
 
+&sound {
+	audio-asrc = <&easrc>;
+};
+
 &tlv320aic3x04 {
 	clock-names = "mclk";
 	clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
@@ -197,8 +207,7 @@
 
 	pinctrl_usbotg: usbotggrp {
 		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR	0x84>,
-			   <MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>,
-			   <MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID		0x1C4>;
+			   <MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>;
 	};
 
 	pinctrl_usdhc2: usdhc2grp {
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
index 9ea28941068d..1d23814e11cd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
@@ -52,6 +52,10 @@
 	cpu-supply = <&buck2_reg>;
 };
 
+&easrc {
+	status = "okay";
+};
+
 &flexspi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexspi>;
@@ -60,11 +64,16 @@
 	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <84000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+		vcc-supply = <&buck5_reg>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
@@ -77,8 +86,8 @@
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	sensor0: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 
@@ -208,15 +217,22 @@
 		read-only;
 		reg = <0x53>;
 		pagesize = <16>;
+		vcc-supply = <&reg_vcc3v3>;
 	};
 
 	eeprom0: eeprom@57 {
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
 	};
 };
 
+&mipi_dsi {
+	vddcore-supply = <&ldo4_reg>;
+	vddio-supply = <&ldo3_reg>;
+};
+
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
index 3ed7021a487c..3434b189fa58 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
@@ -1,11 +1,14 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
+ * Supports Symphony evaluation board versions >= 1.4a.
+ *
  * Copyright 2019-2020 Variscite Ltd.
  * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
  */
 
 /dts-v1/;
 
+#include <dt-bindings/usb/pd.h>
 #include "imx8mn-var-som.dtsi"
 
 / {
@@ -54,6 +57,15 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	/* Peripherals supply, enabled by Q2 after SOM_3V3 rises. */
+	reg_per_3v3: regulator-peripheral-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "per_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &ethphy {
@@ -76,6 +88,7 @@
 		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 		#gpio-cells = <2>;
 		wakeup-source;
+		vcc-supply = <&reg_per_3v3>;
 
 		/* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */
 		usb3-sata-sel-hog {
@@ -100,14 +113,25 @@
 		};
 	};
 
+	/*
+	 * For Symphony board version <= 1.4, the PTN5150 IRQ pin is connected
+	 * to GPIO1_IO11 on the SoM (R106 present, R132 absent). From Symphony
+	 * board version >= 1.4a, the PTN5150 ID pin is connected to GPIO1_IO11
+	 * on the SoM (R106 absent, R132 present).
+	 */
 	extcon_usbotg1: typec@3d {
 		compatible = "nxp,ptn5150";
 		reg = <0x3d>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ptn5150>;
-		status = "okay";
+
+		port {
+			typec1_dr_sw: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
 	};
 };
 
@@ -148,48 +172,21 @@
 };
 
 &usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
 	disable-over-current;
-	extcon = <&extcon_usbotg1>, <&extcon_usbotg1>;
-};
-
-&pinctrl_fec1 {
-	fsl,pins = <
-		MX8MN_IOMUXC_ENET_MDC_ENET1_MDC			0x3
-		MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
-		MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
-		MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
-		MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
-		MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
-		MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
-		MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
-		MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
-		MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
-		MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
-		MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
-		MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
-		MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
-		/* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */
-	>;
-};
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
 
-&pinctrl_fec1_sleep {
-	fsl,pins = <
-		MX8MN_IOMUXC_ENET_MDC_GPIO1_IO16		0x120
-		MX8MN_IOMUXC_ENET_MDIO_GPIO1_IO17		0x120
-		MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18		0x120
-		MX8MN_IOMUXC_ENET_TD2_GPIO1_IO19		0x120
-		MX8MN_IOMUXC_ENET_TD1_GPIO1_IO20		0x120
-		MX8MN_IOMUXC_ENET_TD0_GPIO1_IO21		0x120
-		MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29		0x120
-		MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28		0x120
-		MX8MN_IOMUXC_ENET_RD1_GPIO1_IO27		0x120
-		MX8MN_IOMUXC_ENET_RD0_GPIO1_IO26		0x120
-		MX8MN_IOMUXC_ENET_TXC_GPIO1_IO23		0x120
-		MX8MN_IOMUXC_ENET_RXC_GPIO1_IO25		0x120
-		MX8MN_IOMUXC_ENET_RX_CTL_GPIO1_IO24		0x120
-		MX8MN_IOMUXC_ENET_TX_CTL_GPIO1_IO22		0x120
-		/* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */
-	>;
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
 };
 
 &iomuxc {
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
index 87b5e23c766f..38ef9e4fdf07 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -27,9 +27,18 @@
 		regulator-name = "eth_phy_pwr";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <20000>;
 		gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	reg_3v3_fixed: regulator-3v3-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &A53_0 {
@@ -98,11 +107,17 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethphy: ethernet-phy@4 {
+		ethphy: ethernet-phy@4 { /* AR8033 or ADIN1300 */
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <4>;
 			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
+			/*
+			 * Deassert delay:
+			 * ADIN1300 requires 5ms.
+			 * AR8033   requires 1ms.
+			 */
+			reset-deassert-us = <20000>;
 		};
 	};
 };
@@ -207,7 +222,7 @@
 			};
 
 			ldo5_reg: LDO5 {
-				regulator-compatible = "ldo5";
+				regulator-name = "ldo5";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
@@ -222,6 +237,13 @@
 			};
 		};
 	};
+
+	eeprom_som: eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3_fixed>;
+	};
 };
 
 &i2c3 {
@@ -278,7 +300,7 @@
 	keep-power-in-suspend;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
@@ -345,7 +367,7 @@
 			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
 			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
 			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
-			MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+			MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x159
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
index 636f8602b979..a5f52f60169e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -17,6 +17,8 @@
 	compatible = "gw,imx8mn-gw7902", "fsl,imx8mn";
 
 	aliases {
+		rtc0 = &gsc_rtc;
+		rtc1 = &snvs_rtc;
 		usb0 = &usbotg1;
 	};
 
@@ -189,15 +191,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -213,7 +215,6 @@
 		compatible = "microchip,mcp2515";
 		reg = <0>;
 		clocks = <&can20m>;
-		oscillator-frequency = <20000000>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		spi-max-frequency = <10000000>;
@@ -257,7 +258,7 @@
 
 &gpio1 {
 	gpio-line-names = "", "", "", "", "", "", "", "",
-		"", "", "", "", "", "m2_reset", "", "m2_wdis#",
+		"m2_pwr_en", "", "", "", "", "m2_reset", "", "m2_wdis#",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "";
 };
@@ -279,7 +280,7 @@
 &gpio4 {
 	gpio-line-names = "", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "app_gpio1", "", "uart1_rs485",
+		"", "", "", "", "", "app_gpio1", "vdd_4p0_en", "uart1_rs485",
 		"", "uart1_term", "uart1_half", "app_gpio2",
 		"mipi_gpio1", "", "", "";
 };
@@ -298,8 +299,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -310,6 +314,8 @@
 		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		adc {
 			compatible = "gw,gsc-adc";
@@ -323,7 +329,7 @@
 			};
 
 			channel@8 {
-				gw,mode = <1>;
+				gw,mode = <3>;
 				reg = <0x08>;
 				label = "vdd_bat";
 			};
@@ -427,7 +433,7 @@
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		rohm,reset-snvs-powered;
 		#clock-cells = <0>;
-		clocks = <&osc_32k 0>;
+		clocks = <&osc_32k>;
 		clock-output-names = "clk-32k-out";
 
 		regulators {
@@ -558,7 +564,7 @@
 		pagesize = <16>;
 	};
 
-	rtc@68 {
+	gsc_rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -566,8 +572,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	accelerometer@19 {
@@ -578,23 +587,28 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "INT1";
 	};
 };
 
 /* off-board header */
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
 /* off-board header */
 &i2c4 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
@@ -632,7 +646,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
 	rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {
@@ -657,12 +670,21 @@
 
 /* SDIO WiFi */
 &usdhc2 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
 	bus-width = <4>;
 	non-removable;
 	vmmc-supply = <&reg_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	wifi@0 {
+		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+		reg = <0>;
+	};
 };
 
 /* eMMC */
@@ -671,6 +693,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
@@ -690,10 +714,12 @@
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x40000159 /* M2_GDIS# */
+			MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x40000041 /* M2_PWR_EN */
 			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041 /* M2_RESET */
 			MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7	0x40000119 /* M2_OFF# */
 			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x40000159 /* M2_WDIS# */
 			MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x40000041 /* APP GPIO1 */
+			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x40000041 /* VDD_4P0_EN */
 			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x40000041 /* APP GPIO2 */
 			MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8	0x40000041 /* UART2_EN# */
 			MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x40000041 /* MIPI_GPIO1 */
@@ -727,8 +753,6 @@
 			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
 			MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19 /* RST# */
 			MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19 /* IRQ# */
-			MX8MN_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN	0x141
-			MX8MN_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT	0x141
 		>;
 	};
 
@@ -745,6 +769,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
@@ -752,6 +783,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
@@ -759,6 +797,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
@@ -766,6 +811,13 @@
 		>;
 	};
 
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
 	pinctrl_gpio_leds: gpioledgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x19
@@ -885,6 +937,28 @@
 		>;
 	};
 
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 0c71b740a316..b98b3d0ddf25 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -62,7 +62,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -83,7 +82,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -102,7 +100,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -121,7 +118,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -139,6 +135,7 @@
 		A53_L2: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
@@ -295,6 +292,7 @@
 				sai2: sai@30020000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30020000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI2_IPG>,
 						<&clk IMX8MN_CLK_DUMMY>,
@@ -309,6 +307,7 @@
 				sai3: sai@30030000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30030000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -323,6 +322,7 @@
 				sai5: sai@30050000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30050000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI5_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -339,6 +339,7 @@
 				sai6: sai@30060000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30060000  0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI6_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -366,6 +367,7 @@
 						      "pll8k", "pll11k", "clkext3";
 					dmas = <&sdma2 24 25 0x80000000>;
 					dma-names = "rx";
+					#sound-dai-cells = <0>;
 					status = "disabled";
 				};
 
@@ -396,6 +398,7 @@
 				sai7: sai@300b0000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x300b0000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI7_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -497,6 +500,8 @@
 				compatible = "fsl,imx8mn-tmu", "fsl,imx8mm-tmu";
 				reg = <0x30260000 0x10000>;
 				clocks = <&clk IMX8MN_CLK_TMU_ROOT>;
+				nvmem-cells = <&tmu_calib>;
+				nvmem-cell-names = "calib";
 				#thermal-sensor-cells = <0>;
 			};
 
@@ -551,7 +556,7 @@
 				reg = <0x30330000 0x10000>;
 			};
 
-			gpr: iomuxc-gpr@30340000 {
+			gpr: syscon@30340000 {
 				compatible = "fsl,imx8mn-iomuxc-gpr", "syscon";
 				reg = <0x30340000 0x10000>;
 			};
@@ -563,23 +568,40 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mn_uid: unique-id@410 {
+				/*
+				 * The register address below maps to the MX8M
+				 * Fusemap Description Table entries this way.
+				 * Assuming
+				 *   reg = <ADDR SIZE>;
+				 * then
+				 *   Fuse Address = (ADDR * 4) + 0x400
+				 * Note that if SIZE is greater than 4, then
+				 * each subsequent fuse is located at offset
+				 * +0x10 in Fusemap Description Table (e.g.
+				 * reg = <0x4 0x8> describes fuses 0x410 and
+				 * 0x420).
+				 */
+				imx8mn_uid: unique-id@4 { /* 0x410-0x420 */
 					reg = <0x4 0x8>;
 				};
 
-				cpu_speed_grade: speed-grade@10 {
+				cpu_speed_grade: speed-grade@10 { /* 0x440 */
 					reg = <0x10 4>;
 				};
 
-				fec_mac_address: mac-address@90 {
+				tmu_calib: calib@3c { /* 0x4f0 */
+					reg = <0x3c 4>;
+				};
+
+				fec_mac_address: mac-address@90 { /* 0x640 */
 					reg = <0x90 6>;
 				};
 			};
 
-			anatop: anatop@30360000 {
-				compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop",
-					     "syscon";
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop";
 				reg = <0x30360000 0x10000>;
+				#clock-cells = <1>;
 			};
 
 			snvs: snvs@30370000 {
@@ -611,6 +633,8 @@
 			clk: clock-controller@30380000 {
 				compatible = "fsl,imx8mn-ccm";
 				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 					 <&clk_ext3>, <&clk_ext4>;
@@ -662,7 +686,6 @@
 					pgc_otg1: power-domain@1 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MN_POWER_DOMAIN_OTG1>;
-						power-domains = <&pgc_hsiomix>;
 					};
 
 					pgc_gpumix: power-domain@2 {
@@ -672,7 +695,6 @@
 							 <&clk IMX8MN_CLK_GPU_SHADER>,
 							 <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
 							 <&clk IMX8MN_CLK_GPU_AHB>;
-						resets = <&src IMX8MQ_RESET_GPU_RESET>;
 					};
 
 					pgc_dispmix: power-domain@3 {
@@ -838,6 +860,8 @@
 					clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
 						 <&clk IMX8MN_CLK_UART2_ROOT>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 			};
@@ -1039,6 +1063,79 @@
 			#size-cells = <1>;
 			ranges;
 
+			lcdif: lcdif@32e00000 {
+				compatible = "fsl,imx8mn-lcdif", "fsl,imx6sx-lcdif";
+				reg = <0x32e00000 0x10000>;
+				clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_LCDIF>;
+				status = "disabled";
+
+				port {
+					lcdif_to_dsim: endpoint {
+						remote-endpoint = <&dsim_from_lcdif>;
+					};
+				};
+			};
+
+			mipi_dsi: dsi@32e10000 {
+				compatible = "fsl,imx8mn-mipi-dsim", "fsl,imx8mm-mipi-dsim";
+				reg = <0x32e10000 0x400>;
+				clocks = <&clk IMX8MN_CLK_DSI_CORE>,
+					 <&clk IMX8MN_CLK_DSI_PHY_REF>;
+				clock-names = "bus_clk", "sclk_mipi";
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_DSI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dsim_from_lcdif: endpoint {
+							remote-endpoint = <&lcdif_to_dsim>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_dsi_out: endpoint {
+						};
+					};
+				};
+			};
+
+			isi: isi@32e20000 {
+				compatible = "fsl,imx8mn-isi";
+				reg = <0x32e20000 0x8000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_APB_ROOT>;
+				clock-names = "axi", "apb";
+				fsl,blk-ctrl = <&disp_blk_ctrl>;
+				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_ISI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						isi_in: endpoint {
+							remote-endpoint = <&mipi_csi_out>;
+						};
+					};
+				};
+			};
+
 			disp_blk_ctrl: blk-ctrl@32e28000 {
 				compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
 				reg = <0x32e28000 0x100>;
@@ -1064,25 +1161,74 @@
 					      "lcdif-axi", "lcdif-apb", "lcdif-pix",
 					      "dsi-pclk", "dsi-ref",
 					      "csi-aclk", "csi-pclk";
+				assigned-clocks = <&clk IMX8MN_CLK_DSI_CORE>,
+						  <&clk IMX8MN_CLK_DSI_PHY_REF>,
+						  <&clk IMX8MN_CLK_DISP_PIXEL>,
+						  <&clk IMX8MN_CLK_DISP_AXI>,
+						  <&clk IMX8MN_CLK_DISP_APB>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
+							 <&clk IMX8MN_CLK_24M>,
+							 <&clk IMX8MN_VIDEO_PLL1_OUT>,
+							 <&clk IMX8MN_SYS_PLL2_1000M>,
+							 <&clk IMX8MN_SYS_PLL1_800M>;
+				assigned-clock-rates = <266000000>,
+						       <24000000>,
+						       <24000000>,
+						       <500000000>,
+						       <200000000>;
 				#power-domain-cells = <1>;
 			};
 
+			mipi_csi: mipi-csi@32e30000 {
+				compatible = "fsl,imx8mm-mipi-csi2";
+				reg = <0x32e30000 0x1000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				assigned-clocks = <&clk IMX8MN_CLK_CAMERA_PIXEL>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>;
+				assigned-clock-rates = <333000000>;
+				clock-frequency = <333000000>;
+				clocks = <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MN_CLK_CAMERA_PIXEL>,
+					 <&clk IMX8MN_CLK_CSI1_PHY_REF>,
+					 <&clk IMX8MN_CLK_DISP_AXI_ROOT>;
+				clock-names = "pclk", "wrap", "phy", "axi";
+				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_CSI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_csi_out: endpoint {
+							remote-endpoint = <&isi_in>;
+						};
+					};
+				};
+			};
+
 			usbotg1: usb@32e40000 {
-				compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
+				compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x32e40000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
-				clock-names = "usb1_ctrl_root_clk";
 				assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>;
 				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
-				power-domains = <&pgc_otg1>;
+				power-domains = <&pgc_hsiomix>;
 				status = "disabled";
 			};
 
 			usbmisc1: usbmisc@32e40200 {
-				compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc";
+				compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc",
+					     "fsl,imx6q-usbmisc";
 				#index-cells = <1>;
 				reg = <0x32e40200 0x200>;
 			};
@@ -1095,7 +1241,6 @@
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 			#dma-cells = <1>;
 			dma-channels = <4>;
 			clocks = <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
@@ -1104,7 +1249,7 @@
 		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -1176,5 +1321,6 @@
 		assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
 		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_otg1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-adpismarc.dts b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-adpismarc.dts
new file mode 100644
index 000000000000..6a688510dad9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-adpismarc.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Heiko Schocher <hs@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx8mp-aristainetos3a-som-v1.dtsi"
+
+&{/} {
+	model = "Aristainetos3 ADLink PI SMARC carrier";
+	compatible = "abb,imx8mp-aristanetos3-adpismarc",
+		     "abb,imx8mp-aristanetos3-som",
+		     "fsl,imx8mp";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&i2c2 {
+	gpio8: pinctrl@3e {
+		compatible = "semtech,sx1509q";
+		reg = <0x3e>;
+
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		semtech,probe-reset;
+		gpio-controller;
+		interrupt-controller;
+		interrupt-parent = <&gpio6>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios-lvds.dtso b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios-lvds.dtso
new file mode 100644
index 000000000000..9d1f3b4ccc79
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios-lvds.dtso
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Heiko Schocher <hs@denx.de>
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	model = "Aristainetos3 helios carrier with LVDS";
+	compatible = "abb,imx8mp-aristanetos3-helios",
+		     "abb,imx8mp-aristanetos3-som",
+		     "fsl,imx8mp";
+
+	panel_lvds: panel-lvds {
+		compatible = "lg,lb070wv8";
+		power-supply = <&reg_vcc_disp>;
+		backlight = <&lvds_backlight>;
+
+		port {
+			in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+
+	reg_vcc_disp: regulator-disp {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_vcc_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "disp_power_en_2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3_hog>;
+
+	lvdssel-hog {
+		gpio-hog;
+		gpios = <23 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "LVDSSEL";
+	};
+};
+
+&hdmi_blk_ctrl {
+	status = "disabled";
+};
+
+&hdmi_pvi {
+	status = "disabled";
+};
+
+&hdmi_tx {
+	status = "disabled";
+};
+
+&hdmi_tx_phy {
+	status = "disabled";
+};
+
+&irqsteer_hdmi {
+	status = "disabled";
+};
+
+&ldb_lvds_ch0 {
+	remote-endpoint = <&in_lvds0>;
+};
+
+&lcdif1 {
+	status = "disabled";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "disabled";
+};
+
+&lvds_backlight {
+	status = "okay";
+};
+
+&lvds_bridge {
+	/* IMX8MP_CLK_MEDIA_LDB = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */
+	assigned-clock-rates = <232820000>;
+	status = "okay";
+};
+
+&media_blk_ctrl {
+	/*
+	 * currently it is not possible to let display clocks configure
+	 * automatically, so we need to set them manually
+	 */
+	assigned-clock-rates = <500000000>, <200000000>, <0>,
+		/* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */
+		<33260000>, <0>,
+		/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */
+		<465640000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios.dts b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios.dts
new file mode 100644
index 000000000000..a4e649a8239b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Heiko Schocher <hs@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mp-aristainetos3a-som-v1.dtsi"
+
+&{/} {
+	model = "Aristainetos3 helios carrier";
+	compatible = "abb,imx8mp-aristanetos3-helios",
+		     "abb,imx8mp-aristanetos3-som",
+		     "fsl,imx8mp";
+
+	led-controller {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			function-enumerator = <20>;
+			gpios = <&pca6416 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			function-enumerator = <20>;
+			gpios = <&pca6416 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			function-enumerator = <20>;
+			gpios = <&pca6416 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			function-enumerator = <20>;
+			gpios = <&pca6416 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&ethphy1 {
+	status = "disabled";
+};
+
+&fec {
+	status = "disabled";
+};
+
+&i2c1 {
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+	};
+};
+
+&i2c3 {
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "DIN0_CON",
+			"DIN1_CON",
+			"DIN2_CON",
+			"DIN3_CON",
+			"DIN4_CON",
+			"DIN5_CON",
+			"DIN6_CON",
+			"DIN7_CON",
+			"PM102_RES",
+			"COMx_RES",
+			"BPL_RES",
+			"PC_RES",
+			"LED_RED",
+			"LED_YELLOW",
+			"LED_GREEN",
+			"LED_BLUE";
+	};
+
+	rtc@68 {
+		compatible = "st,m41t00";
+		reg = <0x68>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dts b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dts
new file mode 100644
index 000000000000..58e36de7a2cd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Heiko Schocher <hs@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx8mp-aristainetos3a-som-v1.dtsi"
+
+&{/} {
+	model = "Aristainetos3 proton2s carrier";
+	compatible = "abb,imx8mp-aristanetos3-proton2s",
+		     "abb,imx8mp-aristanetos3-som",
+		     "fsl,imx8mp";
+
+	watchdog {
+		/* MAX6371KA */
+		compatible = "linux,wdt-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_watchdog_gpio>;
+		always-running;
+		gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		hw_algo = "level";
+		/* Reset triggers in 3..9 seconds */
+		hw_margin_ms = <1500>;
+	};
+};
+
+&ethphy1 {
+	status = "disabled";
+};
+
+&eqos {
+	max-speed = <100>;
+};
+
+&ecspi1 {
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+};
+
+&fec {
+	status = "disabled";
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_proton2s>;
+
+	gpio-line-names =
+		"", "", "", "", "", "", "", "POWER",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"RELAY0", "RELAY1", "RELAY2", "HEATER",
+		"FAN", "SPARE",	"CLEAR", "FAULT",
+		"", "", "", "", "", "", "", "", "";
+};
+
+&i2c2 {
+	tlc59108@40 {
+		compatible = "ti,tlc59108";
+		reg = <0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0x0>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			function-enumerator = <20>;
+		};
+
+		led@1 {
+			reg = <0x1>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			function-enumerator = <20>;
+		};
+
+		led@2 {
+			reg = <0x2>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			function-enumerator = <21>;
+		};
+
+		led@3 {
+			reg = <0x3>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			function-enumerator = <21>;
+		};
+
+		led@4 {
+			reg = <0x4>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			function-enumerator = <21>;
+		};
+
+		led@5 {
+			reg = <0x5>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			function-enumerator = <22>;
+		};
+
+		led@6 {
+			reg = <0x6>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			function-enumerator = <22>;
+		};
+
+		led@7 {
+			reg = <0x7>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			function-enumerator = <22>;
+		};
+	};
+
+	rtc1: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&uart3 {
+	pinctrl-0 = <&pinctrl_uart3>;
+};
+
+&uart4 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rts-delay = <0 0>;
+	rts-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usdhc1 {
+	status = "disabled";
+};
+
+&wdog1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3a-som-v1.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3a-som-v1.dtsi
new file mode 100644
index 000000000000..f654d866e58c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3a-som-v1.dtsi
@@ -0,0 +1,1107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024 Heiko Schocher <hs@denx.de>
+ */
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "ADLINK LEC-iMX8MP-Q-N-4G-32G";
+	compatible = "abb,imx8mp-aristanetos3-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		mmc0 = &usdhc3;	/* eMMC */
+		mmc1 = &usdhc2;	/* MicroSD */
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200";
+		stdout-path = &uart2;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			function-enumerator = <0>;
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	lvds_backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_bklt_en>;
+		pwms = <&pwm2 0 50000 0>;
+		enable-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <80>;
+		status = "disabled";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* Memory size 512 MiB..8 GiB will be filled by U-Boot */
+		reg = <0x0 0x40000000 0 0x08000000>;
+	};
+
+	pcie0_refclk: clock-pcie-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_reg>;
+		gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can1-stby";
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan2_reg>;
+		enable-active-high;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can2-stby";
+	};
+
+	reg_dp83867_2v5: regulator-enet {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 15 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "enet_2v5";
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb1_host_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_vbus>;
+		enable-active-high;
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb1_host_vbus";
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		enable-active-high;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; /* SD2_RESET */
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_3V3_SD";
+		off-on-delay-us = <12000>;
+		startup-delay-us = <100>;
+		vin-supply = <&buck4>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&clk {
+	clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+		 <&clk_ext3>, <&clk_ext4>;
+	clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+		      "clk_ext3", "clk_ext4";
+	assigned-clocks = <&clk IMX8MP_CLK_A53_SRC>,
+			  <&clk IMX8MP_CLK_A53_CORE>,
+			  <&clk IMX8MP_CLK_NOC>,
+			  <&clk IMX8MP_CLK_NOC_IO>,
+			  <&clk IMX8MP_CLK_GIC>,
+			  <&clk IMX8MP_CLK_AUDIO_AHB>,
+			  <&clk IMX8MP_CLK_AUDIO_AXI_SRC>,
+			  <&clk IMX8MP_AUDIO_PLL1>,
+			  <&clk IMX8MP_AUDIO_PLL2>,
+			  <&clk IMX8MP_VIDEO_PLL1>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs2>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW &gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* eth0 */
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos_rgmii>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	snps,force_thresh_dma_mode;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: eqos-ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_75_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,min-output-impedance;
+			ti,dp83867-rxctrl-strap-quirk;
+			interrupt-parent = <&gpio4>;
+			interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+};
+
+/* eth1 */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_rgmii>;
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpio = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_75_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,min-output-impedance;
+			ti,dp83867-rxctrl-strap-quirk;
+			eee-broken-1000t;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "disabled";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "disabled";
+};
+
+&hdmi_blk_ctrl {
+	status = "okay";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		/*
+		 * i.MX 8M Plus Data Sheet for Consumer Products
+		 * 3.1.4 Operating ranges
+		 * MIMX8ML8CVNKZAB
+		 */
+		regulators {
+			buck1: BUCK1 {	/* VDD_SOC (dual-phase with BUCK3) */
+				regulator-name = "buck1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2: BUCK2 {	/* VDD_ARM */
+				regulator-name = "buck2";
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4: BUCK4 {	/* VDD_3V3 */
+				regulator-name = "buck4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5: BUCK5 {	/* VDD_1V8 */
+				regulator-name = "buck5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6: BUCK6 {	/* NVCC_DRAM_1V1 */
+				regulator-name = "buck6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo1: LDO1 {	/* NVCC_SNVS_1V8 */
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo2: LDO2 {	/* VDDA_1V8 */
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo3: LDO3 {	/* VDDA_1V8 */
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4: LDO4 {	/* PMIC_LDO4 */
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo5: LDO5 {	/* NVCC_SD2 */
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&i2c5 {
+	#address-cells = <1>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	status = "okay";
+};
+
+&i2c6 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	scl-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	/* TPM - ST33TPHF2XI2C U2301 */
+	tpm: tpm@2e {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm_irq>;
+		compatible = "st,st33ktpm2xi2c", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+
+		label = "tpm";
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
+
+	/* SX1509(0) U2605 */
+	gpio6: pinctrl@3f {
+		compatible = "semtech,sx1509q";
+		reg = <0x3f>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		semtech,probe-reset;
+		gpio-controller;
+		interrupt-controller;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	/* RTC U2607 */
+	rtc0: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+
+	/* SX1509(1) U2606 */
+	gpio7: pinctrl@70 {
+		compatible = "semtech,sx1509q";
+		reg = <0x70>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		semtech,probe-reset;
+		gpio-controller;
+		interrupt-controller;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+
+		gpio6-cfg {
+			pins = "gpio6";
+			output-high;
+		};
+
+		gpio7-cfg {
+			pins = "gpio7";
+			output-high;
+		};
+	};
+};
+
+&irqsteer_hdmi {
+	status = "okay";
+};
+
+&lcdif1 {
+	status = "disabled";
+};
+
+&lcdif2 {
+	status = "disabled";
+};
+
+/* HDMI */
+&lcdif3 {
+	status = "okay";
+
+};
+
+&lvds_bridge {
+	status = "disabled";
+};
+
+&mipi_dsi {
+	status = "disabled";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 20 GPIO_ACTIVE_LOW>;
+	fsl,tx-deemph-gen1 = <0x1f>;
+	fsl,max-link-speed = <3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+/* SD slot */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: aristainetos3-ecspi1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x82
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x40000
+		>;
+	};
+
+	pinctrl_ecspi1_cs2: aristainetos3-ecspi1-cs2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x40000
+		>;
+	};
+
+	pinctrl_ecspi2: aristainetos3-ecspi2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x40000
+		>;
+	};
+
+	pinctrl_eqos_rgmii: aristainetos3-eqos-rgmii-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22				0x19
+		>;
+	};
+
+	pinctrl_fec_rgmii: aristainetos3-fec-rgmii-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x19
+		>;
+	};
+
+	pinctrl_flexcan1: aristainetos3-flexcan1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX			0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX			0x154
+		>;
+	};
+
+	pinctrl_flexcan1_reg: aristainetos3-flexcan1-reg-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05  0x154
+		>;
+	};
+
+	pinctrl_flexcan2: aristainetos3-flexcan2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX         0x154
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX         0x154
+		>;
+	};
+
+	pinctrl_flexcan2_reg: aristainetos3-flexcan2-reg-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27      0x154
+		>;
+	};
+
+	pinctrl_gpio3_hog: aristainetos3-gpio3-hog-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23	0xd6
+		>;
+	};
+
+	pinctrl_gpio_led: aristainetos3-gpio-led-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x19
+		>;
+	};
+
+	pinctrl_gpio_proton2s: aristainetos3-gpio-proton2s-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07	0x19
+		>;
+	};
+
+	pinctrl_hdmi: aristainetos3-hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000019
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x40000019
+		>;
+	};
+
+	pinctrl_i2c1: aristainetos3-i2c1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: aristainetos3-i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x1c3
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x1c3
+		>;
+	};
+
+	pinctrl_i2c2: aristainetos3-i2c2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: aristainetos3-i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x1c3
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x1c3
+		>;
+	};
+
+	pinctrl_i2c3: aristainetos3-i2c3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: aristainetos3-i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x1c3
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x1c3
+		>;
+	};
+
+	pinctrl_i2c5: aristainetos3-i2c5-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL	0x400001c3
+			MX8MP_IOMUXC_SAI5_MCLK__I2C5_SDA	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c6: aristainetos3-i2c6-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL	0x400001c3
+			MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c6_gpio: aristainetos3-i2c6-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19	0x1c3
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20	0x1c3
+		>;
+	};
+
+	pinctrl_lcd0_vcc_en: aristainetos3-lcd0-vcc-en-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0xd6
+		>;
+	};
+
+	pinctrl_lvds_bklt_en: aristainetos3-lvds-bklt-en-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0xd6
+		>;
+	};
+
+	pinctrl_pcie: aristainetos3-pcie-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x61
+			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20	0x41
+		>;
+	};
+
+	pinctrl_pmic: aristainetos3-pmic-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x41
+		>;
+	};
+
+	pinctrl_pwm1: aristainetos3-pwm1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm2: aristainetos3-pwm2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT	0x116
+		>;
+	};
+
+	pinctrl_tpm_irq: aristainetos3-tpm-irq-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0xd6
+		>;
+	};
+
+	pinctrl_uart1: aristainetos3-uart1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart2: aristainetos3-uart2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x140
+			MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS	0x140
+		>;
+	};
+
+	pinctrl_uart3: aristainetos3-uart3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_NAND_CE0_B__UART3_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart4: aristainetos3-uart4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX    0x140
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX    0x140
+			MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09	0x140
+			MX8MP_IOMUXC_NAND_DATA02__UART4_DCE_CTS 0x140
+		>;
+	};
+
+	pinctrl_usb1_vbus: aristainetos3-usb1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14	0x19
+		>;
+	};
+
+	pinctrl_usdhc1: aristainetos3-usdhc1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: aristainetos3-usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: aristainetos3-usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2: aristainetos3-usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: aristainetos3-usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: aristainetos3-usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: aristainetos3-usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x40000080
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: aristainetos3-usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc3: aristainetos3-usdhc3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: aristainetos3-usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: aristainetos3-usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_watchdog_gpio: aristainetos3-wdog-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06	0x19
+		>;
+	};
+
+	pinctrl_wdog: aristainetos3-wdog-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
new file mode 100644
index 000000000000..31c33acb560c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
@@ -0,0 +1,837 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Logic PD, Inc dba Beacon EmbeddedWorks
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp.dtsi"
+#include "imx8mp-beacon-som.dtsi"
+
+/ {
+	model = "Beacon EmbeddedWorks i.MX8MPlus Development kit";
+	compatible = "beacon,imx8mp-beacon-kit", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	clk_xtal25: clock-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+
+	dmic_codec: dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <1>;
+		#sound-dai-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-0 {
+			label = "btn0";
+			linux,code = <BTN_0>;
+			gpios = <&pca6416_1 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			wakeup-source;
+		};
+
+		button-1 {
+			label = "btn1";
+			linux,code = <BTN_1>;
+			gpios = <&pca6416_1 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			wakeup-source;
+		};
+
+		button-2 {
+			label = "btn2";
+			linux,code = <BTN_2>;
+			gpios = <&pca6416_1 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			wakeup-source;
+		};
+
+		button-3 {
+			label = "btn3";
+			linux,code = <BTN_3>;
+			gpios = <&pca6416_1 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			wakeup-source;
+		};
+	};
+
+	bridge-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector: endpoint {
+				remote-endpoint = <&hdmi_to_connector>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led3>;
+
+		led-0 {
+			label = "gen_led0";
+			gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			label = "gen_led1";
+			gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "gen_led2";
+			gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-3 {
+			label = "heartbeat";
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_audio: regulator-wm8962 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_aud";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <20000>;
+	};
+
+	reg_usb1_host_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_host_vbus";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound-adv7535 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sound-adv7535";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai5>;
+			system-clock-direction-out;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&adv_bridge>;
+		};
+	};
+
+	sound-dmic {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sound-pdm";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+
+		dailink_master: simple-audio-card,cpu {
+			sound-dai = <&micfil>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&dmic_codec>;
+		};
+	};
+
+	sound-wm8962 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8962";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets = "Headphone", "Headphones",
+					    "Microphone", "Headset Mic",
+					    "Speaker", "Speaker";
+		simple-audio-card,routing = "Headphones", "HPOUTL",
+					    "Headphones", "HPOUTR",
+					    "Speaker", "SPKOUTL",
+					    "Speaker", "SPKOUTR",
+					    "Headset Mic", "MICBIAS",
+					    "IN3R", "Headset Mic";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8962>;
+		};
+	};
+};
+
+&audio_blk_ctrl {
+	assigned-clocks = <&clk IMX8MP_AUDIO_PLL1>, <&clk IMX8MP_AUDIO_PLL2>;
+	assigned-clock-rates = <393216000>, <135475200>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm: tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@3 {
+			compatible = "ethernet-phy-id0022.1640",
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <150000>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&gpio2 {
+	usb-mux-hog {
+		gpio-hog;
+		gpios = <20 0>;
+		output-low;
+		line-name = "USB-C Mux En";
+	};
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			hdmi_to_connector:endpoint {
+				remote-endpoint = <&hdmi_connector>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pca6416_3: gpio@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	adv_bridge: hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>;
+		reg-names = "main";
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		adi,dsi-lanes = <4>;
+		#sound-dai-cells = <0>;
+		avdd-supply = <&buck5>;
+		dvdd-supply = <&buck5>;
+		pvdd-supply = <&buck5>;
+		a2vdd-supply = <&buck5>;
+		v1p2-supply = <&buck5>;
+		v3p3-supply = <&buck4>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+
+	pcieclk: clock-generator@68 {
+		compatible = "renesas,9fgv0241";
+		reg = <0x68>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&i2c3 {
+	/* Connected to USB Hub */
+	usb-typec@52 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+		};
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clock-frequency = <384000>;
+	status = "okay";
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wm8962>;
+		clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>;
+		assigned-clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>;
+		assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
+		assigned-clock-rates = <22576000>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+		#sound-dai-cells = <0>;
+	};
+
+	pca6416: gpio@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6414>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pca6416_1: gpio@21 {
+		compatible = "nxp,pcal6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		usb-hub-hog {
+			gpio-hog;
+			gpios = <7 0>;
+			output-low;
+			line-name = "USB Hub Enable";
+		};
+	};
+
+	usb-typec@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hd3ss3220>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&micfil {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX8MP_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <49152000>;
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7535_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	clocks = <&pcieclk 1>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+		port@1 {
+			reg = <1>;
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb1_host_vbus>;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x82
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x82
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x40000
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC	0x2
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO	0x2
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x90
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC	0x90
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x16
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x16
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x16
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x16
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x16
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x16
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x140
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x10
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX	0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX	0x154
+		>;
+	};
+
+	pinctrl_hd3ss3220: hd3ss3220grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x140
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c2
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000010
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x40000010
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL	0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA	0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL	0x400001c2
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA	0x400001c2
+		>;
+	};
+
+	pinctrl_led3: led3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x41
+		>;
+	};
+
+	pinctrl_pcal6414: pcal6414-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27	0x10
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05	0x10 /* PCIe_nDIS */
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x10	/* PCIe_nRST */
+		>;
+	};
+
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_PDM_CLK		0xd6
+			MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_PDM_BIT_STREAM00	0xd6
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC	0xd6
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x19 /* Reset */
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x1d6 /* IRQ */
+		>;
+	};
+
+	pinctrl_typec: typec1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0xc4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
+			MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS		0x140
+			MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS		0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+		>;
+	};
+
+	pinctrl_wm8962: wm8962grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1	0x59
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
new file mode 100644
index 000000000000..6a62cb32e22e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
@@ -0,0 +1,497 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 LogicPD, Inc. dba Beacon EmbeddedWorks
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+	};
+
+	reg_wl_bt: regulator-wifi-bt {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl_bt>;
+		regulator-name = "wl-bt-pow-dwn";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <70000>;
+		regulator-always-on;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	snps,force_thresh_dma_mode;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@3 {
+			compatible = "ethernet-phy-id0022.1640",
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <384000>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <384000>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+	};
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		quartz-load-femtofarads = <12500>;
+		wakeup-source;
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8997-bt";
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wl_bt>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	keep-power-in-suspend;
+	wakeup-source;
+	non-removable;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	mwifiex: wifi@1 {
+		compatible = "marvell,sd8997";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x10
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x10
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK           0x1c2
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B        0x82
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00      0x82
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01      0x82
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02      0x82
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03      0x82
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x1c0
+		>;
+	};
+
+	pinctrl_reg_wl_bt: reg-wl-btgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x40
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x1d0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x166
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts b/arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts
new file mode 100644
index 000000000000..8290f187b79f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+
+#include "imx8mp-sr-som.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP CuBox-M";
+	compatible = "solidrun,imx8mp-cubox-m",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		/delete-property/ ethernet1;
+		rtc0 = &carrier_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_pins>;
+		linux,autosuspend-period = <125>;
+		wakeup-source;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		status {
+			label = "status";
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+	};
+
+	sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+	};
+
+	vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vmmc: regulator-mmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc_pins>;
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <250>;
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+&fec {
+	/* this board does not use second phy / ethernet on SoM */
+	status = "disabled";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c3 {
+	carrier_rtc: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins>;
+
+	hdmi_pins: pinctrl-hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x154
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x154
+		>;
+	};
+
+	ir_pins: pinctrl-ir-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x4f
+		>;
+	};
+
+	led_pins: pinctrl-led-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x0
+		>;
+	};
+
+	usdhc2_pins: pinctrl-usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	usdhc2_100mhz_pins: pinctrl-usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	usdhc2_200mhz_pins: pinctrl-usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	vbus_pins: pinctrl-vbus-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x100
+		>;
+	};
+
+	vmmc_pins: pinctrl-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x0
+		>;
+	};
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+	vbus-supply = <&vbus>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+	vbus-supply = <&vbus>;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&usdhc2_pins>;
+	pinctrl-1 = <&usdhc2_100mhz_pins>;
+	pinctrl-2 = <&usdhc2_200mhz_pins>;
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+	cap-power-off-card;
+	full-pwr-cycle;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
new file mode 100644
index 000000000000..16078ff60ef0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -0,0 +1,1103 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/qca-ar803x.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Data Modul i.MX8M Plus eDM SBC";
+	compatible = "dmo,imx8mp-data-modul-edm-sbc", "fsl,imx8mp";
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* There are 1/2/4 GiB options, adjusted by bootloader. */
+		reg = <0x0 0x40000000 0 0x40000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel_backlight>;
+		brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm1 0 5000000 0>;
+		/* Disabled by default, unless display board plugged in. */
+		status = "disabled";
+	};
+
+	clk_xtal25: clock-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	clk_pwm4: clock-pwm4 {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+		clock-output-names = "codec-pwm4";
+		/*
+		 * 1 / 83 ns ~= 12 MHz , but since the PWM input clock is 24 MHz
+		 * and the calculated PWM period is 1 and duty cycle is 50%, the
+		 * result is exactly 12 MHz, which is fine for SGTL5000 MCLK.
+		 */
+		pwms = <&pwm4 0 83 0>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "J17";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	panel: panel {
+		/* Compatible string is filled in by panel board DT Overlay. */
+		backlight = <&backlight>;
+		power-supply = <&reg_panel_vcc>;
+		/* Disabled by default, unless display board plugged in. */
+		status = "disabled";
+	};
+
+	reg_panel_vcc: regulator-panel-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel_vcc_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "PANEL_VCC";
+		/* GPIO flags are ignored, enable-active-high applies. */
+		gpio = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/* Disabled by default, unless display board plugged in. */
+		status = "disabled";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_3V3_SD";
+		/* GPIO flags are ignored, enable-active-high applies. */
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; /* SD2_RESET */
+		enable-active-high;
+		off-on-delay-us = <12000>;
+		startup-delay-us = <100>;
+		vin-supply = <&buck4>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SGTL5000-Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack";
+		simple-audio-card,routing = "Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+
+	watchdog { /* TPS3813 */
+		compatible = "linux,wdt-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_watchdog_gpio>;
+		always-running;
+		gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		hw_algo = "level";
+		/* Reset triggers in 2..3 seconds */
+		hw_margin_ms = <1500>;
+		/* Disabled by default */
+		status = "disabled";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {	/* W25Q128JVEI */
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+	};
+};
+
+&ecspi2 {	/* Feature connector SPI */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	/* Disabled by default, unless feature board plugged in. */
+	status = "disabled";
+};
+
+&ecspi3 {	/* Display connector SPI */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	/* Disabled by default, unless display board plugged in. */
+	status = "disabled";
+};
+
+&eqos {	/* First ethernet */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-handle = <&phy_eqos>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8031 PHY */
+		phy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			/*
+			 * Dedicated ENET_WOL# signal is unused, the PHY
+			 * can wake the SoC up via INT signal as well.
+			 */
+			interrupts-extended = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			qca,keep-pll-enabled;
+			vddio-supply = <&vddio_eqos>;
+
+			vddio_eqos: vddio-regulator {
+				regulator-name = "VDDIO_EQOS";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vddh_eqos: vddh-regulator {
+				regulator-name = "VDDH_EQOS";
+			};
+		};
+	};
+};
+
+&fec {	/* Second ethernet */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-handle = <&phy_fec>;
+	phy-mode = "rgmii-id";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8031 PHY */
+		phy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			/*
+			 * Dedicated ENET_WOL# signal is unused, the PHY
+			 * can wake the SoC up via INT signal as well.
+			 */
+			interrupts-extended = <&gpio2 2 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			qca,keep-pll-enabled;
+			vddio-supply = <&vddio_fec>;
+
+			vddio_fec: vddio-regulator {
+				regulator-name = "VDDIO_FEC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vddh_fec: vddh-regulator {
+				regulator-name = "VDDH_FEC";
+			};
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "USBHUB_RESET#", "WDOG_B#", "PMIC_INT#",
+		"", "M2_PCIE_RST#", "M2_PCIE_WAKE#", "GPIO5_IO03",
+		"GPIO5_IO04", "PDM_SEL", "ENET_WOL#", "ENET_INT#",
+		"", "", "", "ENET_RST#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "ENET2_INT#", "", "", "", "", "",
+		"WDOG_KICK#", "ENET2_RST#", "CAN_INT#", "RTC_IRQ#",
+		"", "", "", "",
+		"", "", "", "SD2_RESET#", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "",
+		"", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8",
+		"CSI2_PD_1V8", "CSI2_RESET_1V8#", "", "",
+		"", "", "EEPROM_WP_1V8#", "", "", "", "", "",
+		"MEMCFG0", "PCIE_CLK_GEN_CLKPWRGD_PD_1V8#",
+		"", "M2_W_DISABLE1_1V8#",
+		"M2_W_DISABLE2_1V8#", "", "I2C5_SCL_3V3", "I2C5_SDA_3V3",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"DSI_RESET_1V8#", "MEMCFG2", "", "MEMCFG1", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "GRAPHICS_PRSNT_1V8#", "DSI_IRQ_1V8#",
+		"", "DIS_USB_DN1", "DIS_USB_DN2", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "WDOG_EN", "", "",
+		"", "SPI1_CS#", "", "",
+		"", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3",
+		"I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3",
+		"", "", "", "",
+		"", "SPI3_CS#", "", "", "", "", "", "";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_pwm4>;
+		VDDA-supply = <&buck4>;
+		VDDIO-supply = <&buck4>;
+	};
+
+	usb-hub@2c {
+		compatible = "microchip,usb2514bi";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_hub>;
+		individual-port-switching;
+		reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		self-powered;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pcieclk: clk@6a {
+		compatible = "renesas,9fgv0241";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		/*
+		 * i.MX 8M Plus Data Sheet for Consumer Products
+		 * 3.1.4 Operating ranges
+		 * MIMX8ML8CVNKZAB
+		 */
+		regulators {
+			buck1: BUCK1 {	/* VDD_SOC (dual-phase with BUCK3) */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2: BUCK2 {	/* VDD_ARM */
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4: BUCK4 {	/* VDD_3V3 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5: BUCK5 {	/* VDD_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6: BUCK6 {	/* NVCC_DRAM_1V1 */
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo1: LDO1 {	/* NVCC_SNVS_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo3: LDO3 {	/* VDDA_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4: LDO4 {	/* PMIC_LDO4 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo5: LDO5 {	/* NVCC_SD2 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&i2c5 {	/* HDMI EDID bus */
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&pcieclk 0>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	fsl,max-link-speed = <3>;
+	reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_panel_pwm>;
+	/* Disabled by default, unless display board plugged in. */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&sai3 {
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	status = "okay";
+};
+
+/* SD slot */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&uart1 {	/* RS485 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "disabled";	/* Optional */
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {	/* A53 Debug */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "disabled";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb_dwc3_0 {	/* Lower plug direct */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {	/* Upper plug via HUB */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&wdog1 {
+	status = "okay";
+};
+
+/* IOMUXC node should be at the end of DT to improve readability. */
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>,
+		    <&pinctrl_hog_panel>, <&pinctrl_hog_sbc>,
+		    <&pinctrl_panel_expansion>;
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x44
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x44
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x44
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x40
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x44
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x44
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x44
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x40
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK		0x44
+			MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI		0x44
+			MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO		0x44
+			MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25		0x40
+		>;
+	};
+
+	pinctrl_eqos: eqos-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91
+			/* ENET_RST# */
+			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x6
+			/* ENET_INT# */
+			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11		0x40000090
+		>;
+	};
+
+	pinctrl_fec: fec-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+			/* ENET2_RST# */
+			MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x6
+			/* ENET2_INT# */
+			MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02		0x40000090
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX			0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX			0x154
+		>;
+	};
+
+	pinctrl_hdmi: hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x154
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x154
+		>;
+	};
+
+	pinctrl_hog_feature: hog-feature-grp {
+		fsl,pins = <
+			/* GPIO5_IO03 */
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x40000006
+			/* GPIO5_IO04 */
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x40000006
+
+			/* CAN_INT# */
+			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x40000090
+		>;
+	};
+
+	pinctrl_hog_panel: hog-panel-grp {
+		fsl,pins = <
+			/* GRAPHICS_GPIO0_1V8 */
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07		0x26
+		>;
+	};
+
+	pinctrl_hog_misc: hog-misc-grp {
+		fsl,pins = <
+			/* ENET_WOL# -- shared by both PHYs */
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x40000090
+
+			/* PG_V_IN_VAR# */
+			MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01		0x40000000
+			/* CSI2_PD_1V8 */
+			MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08		0x0
+			/* CSI2_RESET_1V8# */
+			MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09		0x0
+
+			/* DIS_USB_DN1 */
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21		0x0
+			/* DIS_USB_DN2 */
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x0
+
+			/* EEPROM_WP_1V8# */
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14		0x100
+			/* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x0
+			/* GRAPHICS_PRSNT_1V8# */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x40000000
+
+			/* CLK_CCM_CLKO1_3V3 */
+			MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1		0x10
+		>;
+	};
+
+	pinctrl_hog_sbc: hog-sbc-grp {
+		fsl,pins = <
+			/* MEMCFG[0..2] straps */
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x40000140
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x40000140
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x40000140
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x40000084
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x84
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x84
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL			0x40000084
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x84
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x84
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x40000084
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x84
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x84
+		>;
+	};
+
+	pinctrl_i2c5: i2c5-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL		0x40000084
+			MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA		0x40000084
+		>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26		0x84
+			MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27		0x84
+		>;
+	};
+
+	pinctrl_panel_backlight: panel-backlight-grp {
+		fsl,pins = <
+			/* BL_ENABLE_1V8 */
+			MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00		0x104
+		>;
+	};
+
+	pinctrl_panel_expansion: panel-expansion-grp {
+		fsl,pins = <
+			/* DSI_RESET_1V8# */
+			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x2
+			/* DSI_IRQ_1V8# */
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x40000090
+		>;
+	};
+
+	pinctrl_panel_pwm: panel-pwm-grp {
+		fsl,pins = <
+			/* BL_PWM_3V3 */
+			MX8MP_IOMUXC_I2C4_SDA__PWM1_OUT			0x12
+		>;
+	};
+
+	pinctrl_panel_vcc_reg: panel-vcc-grp {
+		fsl,pins = <
+			/* TFT_ENABLE_1V8 */
+			MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06		0x104
+		>;
+	};
+
+	pinctrl_pcie0: pcie-grp {
+		fsl,pins = <
+			/* M2_PCIE_RST# */
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x2
+			/* M2_W_DISABLE1_1V8# */
+			MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23		0x2
+			/* M2_W_DISABLE2_1V8# */
+			MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24		0x2
+			/* CLK_M2_32K768 */
+			MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1		0x14
+			/* M2_PCIE_WAKE# */
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x40000140
+			/* M2_PCIE_CLKREQ# */
+			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B		0x61
+		>;
+	};
+
+	pinctrl_pdm: pdm-grp {
+		fsl,pins = <
+			/* PDM_SEL */
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x0
+			MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_PDM_CLK		0x0
+			MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_PDM_BIT_STREAM00	0x0
+		>;
+	};
+
+	pinctrl_pmic: pmic-grp {
+		fsl,pins = <
+			/* PMIC_nINT */
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x40000090
+		>;
+	};
+
+	pinctrl_pwm4: pwm4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT		0xd6
+		>;
+	};
+
+	pinctrl_rtc: rtc-grp {
+		fsl,pins = <
+			/* RTC_IRQ# */
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x40000090
+		>;
+	};
+
+	pinctrl_sai1: sai1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK	0xd6
+			MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_sai2: sai2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK	0xd6
+		>;
+	};
+
+	pinctrl_sai3: sai3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX		0x49
+			MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX		0x49
+			MX8MP_IOMUXC_SD1_DATA1__UART1_DCE_CTS		0x49
+			MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS		0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX		0x49
+			MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX		0x49
+			MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS		0x49
+			MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS		0x49
+		>;
+	};
+
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x49
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x49
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x20
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x40000080
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
+		>;
+	};
+
+	pinctrl_usb_hub: usb-hub-grp {
+		fsl,pins = <
+			/* USBHUB_RESET# */
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x4
+		>;
+	};
+
+	pinctrl_usb1: usb1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR		0x6
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC		0x80
+		>;
+	};
+
+	pinctrl_watchdog_gpio: watchdog-gpio-grp {
+		fsl,pins = <
+			/* WDOG_B# */
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0x26
+			/* WDOG_EN -- ungate WDT RESET# signal propagation */
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x6
+			/* WDOG_KICK# / WDI */
+			MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x26
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
new file mode 100644
index 000000000000..af02af9e5334
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
@@ -0,0 +1,584 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ * Copyright 2022 Ideas on Board Oy
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/usb/pd.h>
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Polyhex Debix Model A i.MX8MPlus board";
+	compatible = "polyhex,imx8mp-debix-model-a", "polyhex,imx8mp-debix", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_hub: regulator-usb-hub {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_hub>;
+		regulator-name = "USB_HUB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 { /* RTL8211E */
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <200000>;
+		};
+	};
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+	};
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	dr_mode = "host";
+	status = "okay";
+
+	/* 2.x hub on port 1 */
+	usb_hub_2_x: hub@1 {
+		compatible = "usbbda,5411";
+		reg = <1>;
+		vdd-supply = <&reg_usb_hub>;
+		peer-hub = <&usb_hub_3_x>;
+	};
+
+	/* 3.x hub on port 2 */
+	usb_hub_3_x: hub@2 {
+		compatible = "usbbda,411";
+		reg = <2>;
+		vdd-supply = <&reg_usb_hub>;
+		peer-hub = <&usb_hub_2_x>;
+	};
+};
+
+/* SD Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN			0x1f
+			MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT			0x1f
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18				0x19
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16				0x19
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL			0x1c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA			0x1c3
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD				0x19
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC				0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL					0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA					0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL					0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA					0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL					0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA					0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL					0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL				0x400001c3
+			MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03				0x41
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19				0x41
+		>;
+	};
+
+	pinctrl_reg_usb_hub: regusbhubgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26				0x19
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11				0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX				0x14f
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX				0x14f
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX				0x49
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX				0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX				0x49
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX				0x49
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR				0x10
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12				0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B				0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
new file mode 100644
index 000000000000..d241db3743a9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
@@ -0,0 +1,527 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ * Copyright (C) 2023 Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-debix-som-a.dtsi"
+
+/ {
+	model = "Polyhex i.MX8MPlus Debix SOM A on BMB-08";
+	compatible = "polyhex,imx8mp-debix-som-a-bmb-08", "polyhex,imx8mp-debix-som-a",
+		     "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	reg_baseboard_vdd3v3: regulator-baseboard-vdd3v3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "BB_VDD3V3";
+		/* Required timings for ethernet phy's */
+		startup-delay-us = <50000>;
+		off-on-delay-us = <110000>;
+		gpio = <&expander0 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_baseboard_vdd5v0: regulator-baseboard-vdd5v0 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "BB_VDD5V";
+		gpio = <&expander0 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	regulator-som-vdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "SOM_VDD1V8_SW";
+		gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-som-vdd3v3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "SOM_VDD3V3_SW";
+		gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_csi1_1v8: regulator-csi1-vdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "CSI1_VDD1V8";
+		gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_baseboard_vdd3v3>;
+	};
+
+	reg_csi1_3v3: regulator-csi1-vdd3v3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "CSI1_VDD3V3";
+		gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vdd5v0>;
+	};
+
+	reg_csi2_1v8: regulator-csi2-vdd1v8 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_csi2_1v8>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "CSI2_VDD1V8";
+		gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_baseboard_vdd3v3>;
+	};
+
+	reg_csi2_3v3: regulator-csi2-vdd3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_csi2_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "CSI2_VDD3V3";
+		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vdd5v0>;
+	};
+
+	regulator-vbus-usb20 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "USB20_5V";
+		gpio = <&expander1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_baseboard_vdd5v0>;
+	};
+
+	regulator-vbus-usb30 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "USB30_5V";
+		gpio = <&expander1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_baseboard_vdd5v0>;
+	};
+
+	reg_vdd5v0: regulator-vdd5v0 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "VDD_5V";
+		gpio = <&expander0 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	nvmem-cells = <&ethmac1>;
+	nvmem-cell-names = "mac-address";
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20000>;
+			reset-deassert-us = <150000>;
+			eee-broken-1000t;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	nvmem-cells = <&ethmac2>;
+	nvmem-cell-names = "mac-address";
+	phy-supply = <&reg_baseboard_vdd3v3>;
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20000>;
+			reset-deassert-us = <150000>;
+			eee-broken-1000t;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_vdd5v0>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_vdd5v0>;
+	status = "okay";
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&i2c4 {
+	expander0: gpio@20 {
+		compatible = "nxp,pca9535";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <0x02>;
+	};
+
+	expander1: gpio@23 {
+		compatible = "nxp,pca9535";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <0x02>;
+
+		/*
+		 * Since USB1 is bound to peripheral mode we need to ensure
+		 * that VBUS is turned off.
+		 */
+		usb30-otg-hog {
+			gpio-hog;
+			gpios = <13 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "USB30_OTG_EN";
+		};
+	};
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		#clock-cells = <0>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MACs stored in ASCII */
+		ethmac1: mac-address@0 {
+			reg = <0x0 0xc>;
+		};
+
+		ethmac2: mac-address@c {
+			reg = <0xc 0xc>;
+		};
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* Debug */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	/* 2.x hub on port 1 */
+	usb_hub_2_x: hub@1 {
+		compatible = "usb5e3,610";
+		reg = <1>;
+		reset-gpios = <&expander1 9 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vdd5v0>;
+		peer-hub = <&usb_hub_3_x>;
+	};
+
+	/* 3.x hub on port 2 */
+	usb_hub_3_x: hub@2 {
+		compatible = "usb5e3,620";
+		reg = <2>;
+		reset-gpios = <&expander1 9 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vdd5v0>;
+		peer-hub = <&usb_hub_2_x>;
+	};
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* µSD Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	disable-wp;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+
+			MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN			0x1f
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18				0x19
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+			MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN    0x1f
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x19
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX			0x154
+			MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX			0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX			0x154
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX			0x154
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK           0x1c2
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B        0x82
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00      0x82
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01      0x82
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02      0x82
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03      0x82
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x140
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x41
+		>;
+	};
+
+	pinctrl_reg_csi2_1v8: regcsi21v8grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x19
+		>;
+	};
+
+	pinctrl_reg_csi2_3v3: regcsi23v3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x19
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x14f
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x14f
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x49
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x49
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
new file mode 100644
index 000000000000..91094c227744
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ * Copyright (C) 2023 Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+
+#include "imx8mp.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Polyhex i.MX8MPlus Debix SOM A";
+	compatible = "polyhex,imx8mp-debix-som-a", "fsl,imx8mp";
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	adc@48 {
+		 compatible = "ti,ads1115";
+		 reg = <0x48>;
+		 #address-cells = <1>;
+		 #size-cells = <0>;
+
+		 channel@4 {
+			 reg = <4>;
+			 ti,gain = <1>;
+			 ti,datarate = <7>;
+		 };
+
+		 channel@5 {
+			 reg = <5>;
+			 ti,gain = <1>;
+			 ti,datarate = <7>;
+		 };
+
+		 channel@6 {
+			 reg = <6>;
+			 ti,gain = <1>;
+			 ti,datarate = <7>;
+		 };
+
+		 channel@7 {
+			 reg = <7>;
+			 ti,gain = <1>;
+			 ti,datarate = <7>;
+		 };
+	 };
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x41
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x41
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-drc02.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-drc02.dts
new file mode 100644
index 000000000000..c6bf7fd91981
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-drc02.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX8MP variant:
+ * DHCM-iMX8ML8-C160-R204-F1638-SPI16-E2-CAN2-RTC-I-01D2
+ * DHCOM PCB number: 660-100 or newer
+ * DRC02 PCB number: 568-100 or newer
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-dhcom-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX8M Plus DHCOM on DRC02";
+	compatible = "dh,imx8mp-dhcom-drc02", "dh,imx8mp-dhcom-som",
+		     "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+};
+
+&eqos {	/* First ethernet */
+	pinctrl-0 = <&pinctrl_eqos_rmii>;
+	phy-handle = <&ethphy0f>;
+	phy-mode = "rmii";
+
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+				 <&clk IMX8MP_SYS_PLL2_100M>,
+				 <&clk IMX8MP_SYS_PLL2_50M>;
+	assigned-clock-rates = <0>, <100000000>, <50000000>;
+};
+
+&ethphy0g {	/* Micrel KSZ9131RNXI */
+	status = "disabled";
+};
+
+&ethphy0f {	/* SMSC LAN8740Ai */
+	status = "okay";
+};
+
+&fec {	/* Second ethernet */
+	pinctrl-0 = <&pinctrl_fec_rmii>;
+	phy-handle = <&ethphy1f>;
+	phy-mode = "rmii";
+	status = "okay";
+
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+				 <&clk IMX8MP_SYS_PLL2_100M>,
+				 <&clk IMX8MP_SYS_PLL2_50M>,
+				 <&clk IMX8MP_SYS_PLL2_50M>;
+	assigned-clock-rates = <0>, <100000000>, <50000000>, <0>;
+};
+
+&ethphy1f {	/* SMSC LAN8740Ai */
+	status = "okay";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&flexcan2 {
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"DRC02-In1", "", "", "", "", "DHCOM-I", "DRC02-HW2", "DRC02-HW0",
+		"DHCOM-B", "DHCOM-A", "", "DHCOM-H", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+
+	/*
+	 * NOTE: On DRC02, the RS485_RX_En is controlled by a separate
+	 * GPIO line, however the i.MX8 UART driver assumes RX happens
+	 * during TX anyway and that it only controls drive enable DE
+	 * line. Hence, the RX is always enabled here.
+	 */
+	rs485-rx-en-hog {
+		gpio-hog;
+		gpios = <13 0>; /* GPIO Q */
+		line-name = "rs485-rx-en";
+		output-low;
+	};
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"DHCOM-O", "DHCOM-N", "", "SOM-HW1", "", "", "", "",
+		"", "", "", "", "DRC02-In2", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "SOM-HW0", "",
+		"", "", "", "", "", "", "SOM-MEM0", "SOM-MEM1",
+		"SOM-MEM2", "SOM-HW2", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "SOM-HW1", "", "", "", "",
+		"", "", "", "DRC02-Out2", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "DHCOM-C", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "DHCOM-E", "DRC02-Out1",
+		"", "", "", "", "", "", "", "";
+};
+
+/* No HS connector on this SoM variant, so no HDMI, PCIe and only USB HS. */
+&hdmi_blk_ctrl {
+	status = "disabled";
+};
+
+&hdmi_pvi {
+	status = "disabled";
+};
+
+&hdmi_tx {
+	status = "disabled";
+};
+
+&hdmi_tx_phy {
+	status = "disabled";
+};
+
+&i2c3 {
+	/* Resistive touch controller not populated on this one SoM variant. */
+	touchscreen@49 {
+		status = "disabled";
+	};
+};
+
+&irqsteer_hdmi {
+	status = "disabled";
+};
+
+&lcdif3 {
+	status = "disabled";
+};
+
+&pcie_phy {
+	status = "disabled";
+};
+
+&pcie {
+	status = "disabled";
+};
+
+/* Console UART */
+&pinctrl_uart1 {
+	fsl,pins = <
+		/* No pull-ups on DRC02, enable in-SoC pull-ups */
+		MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX		0x149
+		MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX		0x149
+	>;
+};
+
+&pinctrl_uart3 {
+	fsl,pins = <
+		/* No pull-ups on DRC02, enable in-SoC pull-ups */
+		MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x149
+		MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x149
+	>;
+};
+
+&uart1 {
+	/*
+	 * Due to the use of CAN2 the signals for CAN2 Tx and Rx are routed to
+	 * DHCOM UART1 RTS/CTS pins. Therefore this UART have to use DHCOM GPIOs
+	 * for RTS/CTS. So configure DHCOM GPIO I as RTS and GPIO M as CTS.
+	 */
+	/delete-property/ uart-has-rtscts;
+	cts-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; /* GPIO M */
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_dhcom_i &pinctrl_dhcom_m>;
+	pinctrl-names = "default";
+	rts-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
+};
+
+&uart3 {
+	/*
+	 * On DRC02 this UART is used as RS485 interface and RS485_TX_En is
+	 * controlled by DHCOM GPIO P. So remove RTS/CTS pins and the property
+	 * uart-has-rtscts from this UART and add the DHCOM GPIO P pin via
+	 * rts-gpios. The RS485_RX_En is controlled by DHCOM GPIO Q, see gpio1
+	 * node above.
+	 */
+	/delete-property/ uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_dhcom_p &pinctrl_dhcom_q>;
+	pinctrl-names = "default";
+	rts-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; /* GPIO P */
+};
+
+/* No WiFi/BT chipset on this SoM variant. */
+&uart2 {
+	bluetooth {
+		status = "disabled";
+	};
+};
+
+/* USB_OTG port is not routed out on DRC02. */
+&usb3_0 {
+	status = "disabled";
+};
+
+&usb_dwc3_0 {
+	status = "disabled";
+};
+
+/* USB_HOST port has USB Hub connected to it, PWR/OC pins are unused */
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	maximum-speed = "high-speed";
+};
+
+/* No WiFi/BT chipset on this SoM variant. */
+&usdhc1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	/*
+	 * GPIO I is connected to UART1_RTS
+	 * GPIO M is connected to UART1_CTS
+	 * GPIO P is connected to RS485_TX_En
+	 * GPIO Q is connected to RS485_RX_En
+	 */
+	pinctrl-0 = <&pinctrl_hog_base
+		     &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+		     &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+		     &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_j
+		     &pinctrl_dhcom_k &pinctrl_dhcom_l &pinctrl_dhcom_n
+		     &pinctrl_dhcom_o &pinctrl_dhcom_r &pinctrl_dhcom_s
+		     &pinctrl_dhcom_int>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
index 2ca2ede2e94e..ebdf13e97b4e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
@@ -1,23 +1,34 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX8MP variant:
+ * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2
+ * DHCOM PCB number: 660-100 or newer
+ * PDK2 PCB number: 516-400 or newer
  */
 
 /dts-v1/;
 
 #include <dt-bindings/leds/common.h>
-#include <dt-bindings/net/qca-ar803x.h>
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 #include "imx8mp-dhcom-som.dtsi"
 
 / {
 	model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (2)";
-	compatible = "dh,imx8mp-dhcom-pdk2", "fsl,imx8mp";
+	compatible = "dh,imx8mp-dhcom-pdk2", "dh,imx8mp-dhcom-som",
+		     "fsl,imx8mp";
 
 	chosen {
 		stdout-path = &uart1;
 	};
 
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -58,6 +69,18 @@
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X38";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	led {
 		compatible = "gpio-leds";
 
@@ -97,22 +120,49 @@
 			pinctrl-names = "default";
 		};
 	};
-};
 
-/*
- * PDK2 carrier board uses SoM with KSZ9131 populated and connected to
- * SoM EQoS ethernet RGMII interface. Remove the other SoM PHY DT node.
- */
-/delete-node/ &ethphy0f;
+	reg_3p3vdd: regulator-3p3vdd {	/* 3.3VDD */
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3P3VDD";
+	};
 
-/*
- * PDK2 carrier board has KSZ9021 PHY populated and connected to SoM FEC
- * ethernet RGMII interface. The SoM is not populated with second FEC PHY.
- */
-/delete-node/ &ethphy1f;
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SGTL5000-Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack";
+		simple-audio-card,routing = "Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&i2c5 {
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_ext_audio_codec>;
+		VDDA-supply = <&reg_3p3vdd>;
+		VDDIO-supply = <&reg_vdd_3p3v_awo>;
+	};
+};
 
 &fec {	/* Second ethernet */
+	pinctrl-0 = <&pinctrl_fec_rgmii>;
 	phy-handle = <&ethphypdk>;
+	phy-mode = "rgmii";
 
 	mdio {
 		ethphypdk: ethernet-phy@7 { /* KSZ 9021 */
@@ -146,6 +196,58 @@
 	status = "okay";
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pcie_phy {
+	clock-names = "ref";
+	clocks = <&hsio_blk_ctrl>;
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	status = "okay";
+};
+
+&pcie {
+	fsl,max-link-speed = <1>;
+	reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;	/* GPIO J */
+	status = "okay";
+};
+
+&sai3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
 &usb3_1 {
 	fsl,over-current-active-low;
 };
@@ -154,7 +256,7 @@
 	/*
 	 * GPIO_A,B,C,D are connected to buttons.
 	 * GPIO_E,F,H,I are connected to LEDs.
-	 * GPIO_M is connected to CLKOUT2.
+	 * GPIO_M is connected to CLKOUT1.
 	 */
 	pinctrl-0 = <&pinctrl_hog_base
 		     &pinctrl_dhcom_g &pinctrl_dhcom_j
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
new file mode 100644
index 000000000000..ef012e8365b1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX8MP variant:
+ * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2
+ * DHCOM PCB number: 660-100 or newer
+ * PDK3 PCB number: 669-100 or newer
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-dhcom-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3)";
+	compatible = "dh,imx8mp-dhcom-pdk3", "dh,imx8mp-dhcom-som",
+		     "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	clk_xtal25: clock-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */
+			label = "TA1-GPIO-A";
+			linux,code = <KEY_A>;
+			pinctrl-0 = <&pinctrl_dhcom_a>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-1 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			pinctrl-0 = <&pinctrl_dhcom_b>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-2 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
+			label = "TA3-GPIO-C";
+			linux,code = <KEY_C>;
+			pinctrl-0 = <&pinctrl_dhcom_c>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-3 {
+			gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; /* GPIO E */
+			label = "TA4-GPIO-E";
+			linux,code = <KEY_E>;
+			pinctrl-0 = <&pinctrl_dhcom_e>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X28";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; /* GPIO D */
+			pinctrl-0 = <&pinctrl_dhcom_d>;
+			pinctrl-names = "default";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */
+			pinctrl-0 = <&pinctrl_dhcom_f>;
+			pinctrl-names = "default";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; /* GPIO G */
+			pinctrl-0 = <&pinctrl_dhcom_g>;
+			pinctrl-names = "default";
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			pinctrl-0 = <&pinctrl_dhcom_i>;
+			pinctrl-names = "default";
+		};
+	};
+
+	reg_3p3vdd: regulator-3p3vdd {	/* 3.3VDD */
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3P3VDD";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SGTL5000-Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack";
+		simple-audio-card,routing = "Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&i2c5 {
+	i2c-mux@70 {
+		compatible = "nxp,pca9540";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2cmuxed0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			sgtl5000: codec@a {
+				compatible = "fsl,sgtl5000";
+				reg = <0x0a>;
+				#sound-dai-cells = <0>;
+				clocks = <&clk_ext_audio_codec>;
+				VDDA-supply = <&reg_3p3vdd>;
+				VDDIO-supply = <&reg_vdd_3p3v_awo>;
+			};
+
+			csi2exp: gpio@24 {
+				compatible = "nxp,pca9570";
+				reg = <0x24>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"CSI2_#RESET", "CSI2_#PWDN",
+					"CSI_#PWDN", "CSI_#RESET";
+			};
+
+			typec@3d {
+				compatible = "nxp,ptn5150";
+				reg = <0x3d>;
+				interrupt-parent = <&gpio4>;
+				interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ptn5150>;
+
+				port {
+
+					ptn5150_out_ep: endpoint {
+						remote-endpoint = <&dwc3_0_ep>;
+					};
+				};
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <20000>;	/* 0.02 R */
+				ti,shunt-gain = <1>;	/* Drop cca. 40mV */
+			};
+
+			eeprom_board: eeprom@54 {
+				compatible = "atmel,24c04";
+				pagesize = <16>;
+				reg = <0x54>;
+			};
+
+			pcieclk: clock@6b {
+				compatible = "skyworks,si52144";
+				reg = <0x6b>;
+				clocks = <&clk_xtal25>;
+				#clock-cells = <1>;
+			};
+		};
+
+		i2cmuxed1: i2c@1 {	/* HDMI DDC I2C */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&fec {	/* Second ethernet */
+	pinctrl-0 = <&pinctrl_fec_rgmii>;
+	phy-handle = <&ethphypdk>;
+	phy-mode = "rgmii-id";
+
+	mdio {
+		ethphypdk: ethernet-phy@7 { /* Micrel KSZ9131RNXI */
+			compatible = "ethernet-phy-id0022.1642",
+				     "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_ethphy1>;
+			pinctrl-names = "default";
+			reg = <7>;
+			reset-assert-us = <1000>;
+			/* RESET_N signal rise time ~100ms */
+			reset-deassert-us = <120000>;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	ddc-i2c-bus = <&i2cmuxed1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&pcieclk 1>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	status = "okay";
+};
+
+&pcie {
+	fsl,max-link-speed = <3>;
+	reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	usb-role-switch;
+
+	port {
+		dwc3_0_ep: endpoint {
+			remote-endpoint = <&ptn5150_out_ep>;
+		};
+	};
+};
+
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+};
+
+&usb_dwc3_1 {
+	/* This port has USB5734 Hub connected to it, PWR/OC pins are unused */
+	/delete-property/ pinctrl-names;
+	/delete-property/ pinctrl-0;
+};
+
+&iomuxc {
+	/*
+	 * GPIO_A,B,C,E are connected to buttons.
+	 * GPIO_D,F,G,I are connected to LEDs.
+	 * GPIO_H is connected to USB Hub RESET_N.
+	 * GPIO_M is connected to CLKOUT2.
+	 */
+	pinctrl-0 = <&pinctrl_hog_base
+		     &pinctrl_dhcom_h &pinctrl_dhcom_j &pinctrl_dhcom_k
+		     &pinctrl_dhcom_l
+		     &pinctrl_dhcom_int>;
+
+	pinctrl_ptn5150: ptn5150grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x40000000
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-picoitx.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-picoitx.dts
new file mode 100644
index 000000000000..703cf0fb3d2b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-picoitx.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023-2024 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX8MP variant:
+ * DHCM-iMX8ML8-C160-R204-F1638-SPI16-E-SD-RTC-T-RGB-I-01D2
+ * DHCOM PCB number: 660-200 or newer
+ * PicoITX PCB number: 487-600 or newer
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "imx8mp-dhcom-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX8M Plus DHCOM PicoITX";
+	compatible = "dh,imx8mp-dhcom-picoitx", "dh,imx8mp-dhcom-som",
+		     "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_YELLOW>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			pinctrl-0 = <&pinctrl_dhcom_i>;
+			pinctrl-names = "default";
+		};
+	};
+};
+
+&eqos {	/* First ethernet */
+	pinctrl-0 = <&pinctrl_eqos_rmii>;
+	phy-handle = <&ethphy0f>;
+	phy-mode = "rmii";
+
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+				 <&clk IMX8MP_SYS_PLL2_100M>,
+				 <&clk IMX8MP_SYS_PLL2_50M>;
+	assigned-clock-rates = <0>, <100000000>, <50000000>;
+};
+
+&ethphy0g {	/* Micrel KSZ9131RNXI */
+	status = "disabled";
+};
+
+&ethphy0f {	/* SMSC LAN8740Ai */
+	status = "okay";
+};
+
+&fec {
+	status = "disabled";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"DHCOM-G", "", "", "",
+		"", "DHCOM-I", "PicoITX-HW0", "PicoITX-HW2",
+		"DHCOM-B", "DHCOM-A", "", "DHCOM-H", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "PicoITX-HW1", "", "", "", "",
+		"", "", "", "", "DHCOM-INT", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "SOM-HW1", "", "", "", "",
+		"", "", "", "PicoITX-Out2", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "PicoITX-In2", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "",
+		"", "", "PicoITX-In1", "PicoITX-Out1",
+		"", "", "", "", "", "", "", "";
+};
+
+/* No HS connector on this SoM variant, so no HDMI, PCIe and only USB HS. */
+&hdmi_blk_ctrl {
+	status = "disabled";
+};
+
+&hdmi_pvi {
+	status = "disabled";
+};
+
+&hdmi_tx {
+	status = "disabled";
+};
+
+&hdmi_tx_phy {
+	status = "disabled";
+};
+
+&irqsteer_hdmi {
+	status = "disabled";
+};
+
+&lcdif3 {
+	status = "disabled";
+};
+
+&pcie_phy {
+	status = "disabled";
+};
+
+&pcie {
+	status = "disabled";
+};
+
+/* No WiFi/BT chipset on this SoM variant. */
+&uart2 {
+	bluetooth {
+		status = "disabled";
+	};
+};
+
+/* USB_OTG port is not routed out on PicoITX. */
+&usb3_0 {
+	status = "disabled";
+};
+
+&usb_dwc3_0 {
+	status = "disabled";
+};
+
+&usb3_1 {
+	fsl,over-current-active-low;
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	maximum-speed = "high-speed";
+};
+
+/* No WiFi/BT chipset on this SoM variant. */
+&usdhc1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	/*
+	 * The following DHCOM GPIOs are used on this board.
+	 * Therefore, they have been removed from the list below.
+	 * I: yellow led
+	 */
+	pinctrl-0 = <&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+		     &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+		     &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_j
+		     &pinctrl_dhcom_k &pinctrl_dhcom_l &pinctrl_dhcom_m
+		     &pinctrl_dhcom_n &pinctrl_dhcom_o &pinctrl_dhcom_p
+		     &pinctrl_dhcom_q &pinctrl_dhcom_r &pinctrl_dhcom_s
+		     &pinctrl_dhcom_int>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index a616eb378002..68c2e0156a5c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -25,9 +25,7 @@
 
 	reg_eth_vio: regulator-eth-vio {
 		compatible = "regulator-fixed";
-		gpio = <&gpio2 10 GPIO_ACTIVE_LOW>;
-		pinctrl-0 = <&pinctrl_enet_vio>;
-		pinctrl-names = "default";
+		gpio = <&ioexp 2 GPIO_ACTIVE_LOW>;
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
@@ -49,6 +47,19 @@
 		startup-delay-us = <100>;
 		vin-supply = <&buck4>;
 	};
+
+	reg_vdd_3p3v_awo: regulator-vdd-3p3v-awo {	/* VDD_3V3_AWO */
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VDD_3P3V_AWO";
+	};
+
+	wlan_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&ioexp 1 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &A53_0 {
@@ -67,10 +78,15 @@
 	cpu-supply = <&buck2>;
 };
 
+&audio_blk_ctrl {
+	assigned-clocks = <&clk IMX8MP_AUDIO_PLL1>;
+	assigned-clock-rates = <393216000>;
+};
+
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 
@@ -83,7 +99,7 @@
 
 &eqos {	/* First ethernet */
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-0 = <&pinctrl_eqos_rgmii>;
 	phy-handle = <&ethphy0g>;
 	phy-mode = "rgmii-id";
 	status = "okay";
@@ -104,7 +120,7 @@
 			reg = <1>;
 			reset-assert-us = <1000>;
 			reset-deassert-us = <1000>;
-			reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+			reset-gpios = <&ioexp 4 GPIO_ACTIVE_LOW>;
 			/* Non-default PHY population option. */
 			status = "disabled";
 		};
@@ -120,7 +136,7 @@
 			reg = <5>;
 			reset-assert-us = <1000>;
 			reset-deassert-us = <1000>;
-			reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+			reset-gpios = <&ioexp 4 GPIO_ACTIVE_LOW>;
 			/* Default PHY population option. */
 			status = "okay";
 		};
@@ -129,9 +145,9 @@
 
 &fec {	/* Second ethernet */
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-0 = <&pinctrl_fec_rmii>;
 	phy-handle = <&ethphy1f>;
-	phy-mode = "rgmii";
+	phy-mode = "rmii";
 	fsl,magic-packet;
 	status = "okay";
 
@@ -140,14 +156,14 @@
 		#size-cells = <0>;
 
 		/* Up to one PHY may be populated. */
-		ethphy1f: ethernet-phy@1 { /* SMSC LAN8740Ai */
+		ethphy1f: ethernet-phy@2 { /* SMSC LAN8740Ai */
 			compatible = "ethernet-phy-id0007.c110",
 				     "ethernet-phy-ieee802.3-c22";
 			interrupt-parent = <&gpio4>;
 			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-0 = <&pinctrl_ethphy1>;
 			pinctrl-names = "default";
-			reg = <1>;
+			reg = <2>;
 			reset-assert-us = <1000>;
 			reset-deassert-us = <1000>;
 			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
@@ -232,6 +248,36 @@
 	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
+	tc_bridge: bridge@f {
+		compatible = "toshiba,tc9595", "toshiba,tc358767";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tc9595>;
+		reg = <0xf>;
+		clock-names = "ref";
+		clocks = <&clk IMX8MP_CLK_CLKOUT2>;
+		assigned-clocks = <&clk IMX8MP_CLK_CLKOUT2_SEL>,
+				  <&clk IMX8MP_CLK_CLKOUT2>,
+				  <&clk IMX8MP_AUDIO_PLL2_OUT>;
+		assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
+		assigned-clock-rates = <13000000>, <13000000>, <208000000>;
+		reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tc_bridge_in: endpoint {
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+		};
+	};
+
 	pmic: pmic@25 {
 		compatible = "nxp,pca9450c";
 		reg = <0x25>;
@@ -239,7 +285,6 @@
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 
 		/*
 		 * i.MX 8M Plus Data Sheet for Consumer Products
@@ -248,7 +293,6 @@
 		 */
 		regulators {
 			buck1: BUCK1 {	/* VDD_SOC (dual-phase with BUCK3) */
-				regulator-compatible = "BUCK1";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-ramp-delay = <3125>;
@@ -257,7 +301,8 @@
 			};
 
 			buck2: BUCK2 {	/* VDD_ARM */
-				regulator-compatible = "BUCK2";
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-ramp-delay = <3125>;
@@ -266,7 +311,6 @@
 			};
 
 			buck4: BUCK4 {	/* VDD_3V3 */
-				regulator-compatible = "BUCK4";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
@@ -274,7 +318,6 @@
 			};
 
 			buck5: BUCK5 {	/* VDD_1V8 */
-				regulator-compatible = "BUCK5";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
@@ -282,7 +325,6 @@
 			};
 
 			buck6: BUCK6 {	/* NVCC_DRAM_1V1 */
-				regulator-compatible = "BUCK6";
 				regulator-min-microvolt = <1100000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
@@ -290,7 +332,6 @@
 			};
 
 			ldo1: LDO1 {	/* NVCC_SNVS_1V8 */
-				regulator-compatible = "LDO1";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
@@ -298,7 +339,6 @@
 			};
 
 			ldo3: LDO3 {	/* VDDA_1V8 */
-				regulator-compatible = "LDO3";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
@@ -306,13 +346,11 @@
 			};
 
 			ldo4: LDO4 {	/* PMIC_LDO4 */
-				regulator-compatible = "LDO4";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo5: LDO5 {	/* NVCC_SD2 */
-				regulator-compatible = "LDO5";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 			};
@@ -320,8 +358,9 @@
 	};
 
 	adc@48 {
-		compatible = "ti,tla2024";
+		compatible = "ti,ads1015";
 		reg = <0x48>;
+		interrupts-extended = <&ioexp 7 IRQ_TYPE_EDGE_FALLING>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -368,24 +407,54 @@
 	};
 
 	eeprom0: eeprom@50 {	/* EEPROM with EQoS MAC address */
-		compatible = "atmel,24c02";
-		pagesize = <16>;
+		compatible = "atmel,24c32";	/* M24C32-D */
+		pagesize = <32>;
 		reg = <0x50>;
 	};
 
 	rv3032: rtc@51 {
 		compatible = "microcrystal,rv3032";
 		reg = <0x51>;
-		interrupts-extended = <&gpio5 5 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&ioexp 3 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
 	};
 
 	eeprom1: eeprom@53 {	/* EEPROM with FEC MAC address */
-		compatible = "atmel,24c02";
-		pagesize = <16>;
+		compatible = "atmel,24c32";	/* M24C32-D */
+		pagesize = <32>;
 		reg = <0x53>;
 	};
+
+	eeprom0wl: eeprom@58 {
+		compatible = "atmel,24c32d-wl";	/* M24C32-D WL page of 0x50 */
+		pagesize = <32>;
+		reg = <0x58>;
+	};
+
+	eeprom1wl: eeprom@5b {
+		compatible = "atmel,24c32d-wl";	/* M24C32-D WL page of 0x53 */
+		pagesize = <32>;
+		reg = <0x5b>;
+	};
+
+	ioexp: gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ioexp>;
+		wakeup-source;
+
+		gpio-line-names =
+			"BT_REG_EN", "WL_REG_EN", "VIO_SWITCHED_#EN", "RTC_#INT",
+			"ENET_QOS_#RST", "RGB_OSZ_ENABLE", "USB1_ID", "ADC_ALTER_RDY",
+			"DHCOM-W", "DHCOM-V", "DHCOM-U", "DHCOM-T",
+			"BT_HOST_WAKE", "BT_DEV_WAKE", "", "";
+	};
 };
 
 &i2c4 {
@@ -403,11 +472,27 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c5>;
 	pinctrl-1 = <&pinctrl_i2c5_gpio>;
-	scl-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
+&mipi_dsi {
+	samsung,burst-clock-frequency = <160000000>;
+	samsung,esc-clock-frequency = <10000000>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&tc_bridge_in>;
+			};
+		};
+	};
+};
+
 &pwm1 {
 	pinctrl-0 = <&pinctrl_pwm1>;
 	pinctrl-names = "default";
@@ -419,6 +504,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
+	wakeup-source;
 };
 
 &uart2 {
@@ -427,6 +513,23 @@
 	pinctrl-0 = <&pinctrl_uart2>;
 	uart-has-rtscts;
 	status = "okay";
+
+	/*
+	 * PLL1 at 80 MHz supplies UART2 root with 80 MHz clock,
+	 * which with 16x oversampling yields 5 Mbdps baud base,
+	 * which can be well divided by 5/4 to achieve 4 Mbdps,
+	 * which is exactly the maximum rate supported by muRata
+	 * 2AE bluetooth UART.
+	 */
+	assigned-clocks = <&clk IMX8MP_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	assigned-clock-rates = <80000000>;
+
+	bluetooth {
+		compatible = "cypress,cyw4373a0-bt";
+		shutdown-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>;
+		max-speed = <4000000>;
+	};
 };
 
 &uart3 {
@@ -451,8 +554,6 @@
 };
 
 &usb_dwc3_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb0_vbus>;
 	dr_mode = "otg";
 	status = "okay";
 };
@@ -478,6 +579,7 @@
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	mmc-pwrseq = <&wlan_pwrseq>;
 	vmmc-supply = <&buck4>;
 	bus-width = <4>;
 	non-removable;
@@ -488,7 +590,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	brcmf: bcrmf@1 {	/* muRata 2AE */
+	brcmf: wifi@1 {	/* muRata 2AE */
 		reg = <1>;
 		compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac";
 		/*
@@ -496,7 +598,6 @@
 		 * connected to the SoC, but can be connected on to
 		 * SoC pin on the carrier board.
 		 */
-		reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -508,6 +609,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
 	bus-width = <4>;
 	status = "okay";
 };
@@ -538,8 +640,9 @@
 		     &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
 		     &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
 		     &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
-		     /* GPIO_M is connected to CLKOUT2 */
-		     &pinctrl_dhcom_int>;
+		     &pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
+		     &pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
+		     &pinctrl_dhcom_s &pinctrl_dhcom_int>;
 	pinctrl-names = "default";
 
 	pinctrl_dhcom_a: dhcom-a-grp {
@@ -626,6 +729,55 @@
 		>;
 	};
 
+	pinctrl_dhcom_m: dhcom-m-grp {
+		fsl,pins = <
+			/* CSIx_MCLK */
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x2
+		>;
+	};
+
+	pinctrl_dhcom_n: dhcom-n-grp {
+		fsl,pins = <
+			/* CSI2_D3- */
+			MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x2
+		>;
+	};
+
+	pinctrl_dhcom_o: dhcom-o-grp {
+		fsl,pins = <
+			/* CSI2_D3+ */
+			MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x2
+		>;
+	};
+
+	pinctrl_dhcom_p: dhcom-p-grp {
+		fsl,pins = <
+			/* CSI2_D2- */
+			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x2
+		>;
+	};
+
+	pinctrl_dhcom_q: dhcom-q-grp {
+		fsl,pins = <
+			/* CSI2_D2+ */
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x2
+		>;
+	};
+
+	pinctrl_dhcom_r: dhcom-r-grp {
+		fsl,pins = <
+			/* CSI2_D1- */
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x2
+		>;
+	};
+
+	pinctrl_dhcom_s: dhcom-s-grp {
+		fsl,pins = <
+			/* CSI2_D1+ */
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x2
+		>;
+	};
+
 	pinctrl_dhcom_int: dhcom-int-grp {
 		fsl,pins = <
 			/* INT_HIGHEST_PRIO */
@@ -648,10 +800,10 @@
 
 	pinctrl_ecspi1: dhcom-ecspi1-grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x44
-			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x44
-			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x44
-			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x40
+			MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK		0x44
+			MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI		0x44
+			MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO		0x44
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x40
 		>;
 	};
 
@@ -664,7 +816,7 @@
 		>;
 	};
 
-	pinctrl_eqos: dhcom-eqos-grp {	/* RGMII */
+	pinctrl_eqos_rgmii: dhcom-eqos-rgmii-grp {	/* RGMII */
 		fsl,pins = <
 			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
 			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
@@ -683,17 +835,25 @@
 		>;
 	};
 
-	pinctrl_enet_vio: dhcom-enet-vio-grp {
+	pinctrl_eqos_rmii: dhcom-eqos-rmii-grp {	/* RMII */
 		fsl,pins = <
-			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x22
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f
+			MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER		0x1f
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91
+			/* Clock */
+			MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK	0x4000001f
 		>;
 	};
 
 	pinctrl_ethphy0: dhcom-ethphy0-grp {
 		fsl,pins = <
-			/* ENET1_#RST Reset */
-			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x22
-			/* ENET1_#INT Interrupt */
+			/* ENET_QOS_#INT Interrupt */
 			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x22
 		>;
 	};
@@ -707,7 +867,7 @@
 		>;
 	};
 
-	pinctrl_fec: dhcom-fec-grp {
+	pinctrl_fec_rgmii: dhcom-fec-rgmii-grp {	/* RGMII */
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK		0x1f
 			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
@@ -728,6 +888,22 @@
 		>;
 	};
 
+	pinctrl_fec_rmii: dhcom-fec-rmii-grp {	/* RMII */
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER		0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			/* Clock */
+			MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK		0x4000001f
+		>;
+	};
+
 	pinctrl_flexcan1: dhcom-flexcan1-grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX			0x154
@@ -802,6 +978,13 @@
 		>;
 	};
 
+	pinctrl_ioexp: dhcom-ioexp-grp {
+		fsl,pins = <
+			/* #GPIO_EXP_INT */
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x22
+		>;
+	};
+
 	pinctrl_pmic: dhcom-pmic-grp {
 		fsl,pins = <
 			/* PMIC_nINT */
@@ -815,10 +998,21 @@
 		>;
 	};
 
-	pinctrl_rtc: dhcom-rtc-grp {
+	pinctrl_tc9595: dhcom-tc9595-grp {
+		fsl,pins = <
+			/* RESET_DSIBRIDGE */
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x40000146
+			/* DSI-CONV_INT Interrupt */
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x141
+		>;
+	};
+
+	pinctrl_sai3: dhcom-sai3-grp {
 		fsl,pins = <
-			/* RTC_#INT Interrupt */
-			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x40000080
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
 		>;
 	};
 
@@ -865,12 +1059,6 @@
 		>;
 	};
 
-	pinctrl_usb0_vbus: dhcom-usb0-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID		0x0
-		>;
-	};
-
 	pinctrl_usb1_vbus: dhcom-usb1-grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR		0x6
@@ -886,10 +1074,6 @@
 			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0
 			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0
 			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0
-			/* BT_REG_EN */
-			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x144
-			/* WL_REG_EN */
-			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x144
 		>;
 	};
 
@@ -901,10 +1085,6 @@
 			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4
 			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4
 			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4
-			/* BT_REG_EN */
-			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x144
-			/* WL_REG_EN */
-			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x144
 		>;
 	};
 
@@ -916,10 +1096,6 @@
 			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6
 			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6
 			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6
-			/* BT_REG_EN */
-			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x144
-			/* WL_REG_EN */
-			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x144
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-edm-g-wb.dts b/arch/arm64/boot/dts/freescale/imx8mp-edm-g-wb.dts
new file mode 100644
index 000000000000..138f21e257aa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-edm-g-wb.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 TechNexion Ltd.
+ *
+ * Author: Ray Chang <ray.chang@technexion.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-edm-g.dtsi"
+
+/ {
+	compatible = "technexion,edm-g-imx8mp-wb", "technexion,edm-g-imx8mp", "fsl,imx8mp";
+	model = "TechNexion EDM-G-IMX8MP SOM on WB-EDM-G";
+
+	connector {
+		compatible = "usb-c-connector";
+		data-role = "dual";
+		label = "USB-C";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "HDMI OUT";
+		type = "a";
+
+		port {
+			hdmi_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			default-state = "on";
+			gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+			label = "gpio-led";
+		};
+	};
+
+	pcie0_refclk: clock-pcie-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_pwr_3v3: regulator-pwr-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "pwr-3v3";
+	};
+
+	reg_pwr_5v: regulator-pwr-5v {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "pwr-5v";
+	};
+
+	sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+		model = "audio-hdmi";
+	};
+
+	sound-wm8960 {
+		compatible = "fsl,imx-audio-wm8960";
+		audio-asrc = <&easrc>;
+		audio-codec = <&wm8960>;
+		audio-cpu = <&sai3>;
+		audio-routing = "Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Ext Spk", "SPK_LP",
+			"Ext Spk", "SPK_LN",
+			"Ext Spk", "SPK_RP",
+			"Ext Spk", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"LINPUT1", "Mic Jack",
+			"Mic Jack", "MICB";
+		model = "wm8960-audio";
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+&easrc {
+	fsl,asrc-rate  = <48000>;
+	status = "okay";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "", "", "", "DSI_RST", "",
+		"", "", "", "", "", "PCIE_CLKREQ_N", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+	pinctrl-0 = <&pinctrl_gpio1>;
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "GPIO_P249", "GPIO_P251",
+		"", "GPIO_P255", "", "", "", "", "", "",
+		"DSI_BL_EN", "DSI_VDDEN", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+	pinctrl-0 = <&pinctrl_gpio4>;
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-0 = <&pinctrl_hdmi>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	wm8960: audio-codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&reg_pwr_3v3>;
+		DBVDD-supply = <&reg_pwr_3v3>;
+		DCVDD-supply = <&reg_pwr_3v3>;
+		SPKVDD1-supply = <&reg_pwr_5v>;
+		SPKVDD2-supply = <&reg_pwr_5v>;
+		wlf,gpio-cfg = <1 2>;
+		wlf,hp-cfg = <2 2 3>;
+		wlf,shared-lrclk;
+	};
+
+	expander1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "EXPOSURE_TRIG_IN1", "FLASH_OUT1",
+				  "INFO_TRIG_IN1", "CAM_SHUTTER1", "XVS1",
+				  "PWR1_TIME0", "PWR1_TIME1", "PWR1_TIME2",
+				  "EXPOSURE_TRIG_IN2", "FLASH_OUT2",
+				  "INFO_TRIG_IN2", "CAM_SHUTTER2", "XVS2",
+				  "PWR2_TIME0", "PWR2_TIME1", "PWR2_TIME2";
+	};
+
+	expander2: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio4>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "M2_DISABLE_N", "LED_EN", "", "",
+				  "", "", "", "USB_OTG_OC",
+				  "EXT_GPIO8", "EXT_GPIO9", "", "",
+				  "", "CSI1_PDB", "CSI2_PDB", "PD_FAULT";
+		pinctrl-0 = <&pinctrl_expander2_irq>;
+		pinctrl-names = "default";
+	};
+
+	usb_typec: usb-typec@67 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x67>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pinctrl_hd3ss3220_irq>;
+		pinctrl-names = "default";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+};
+
+&i2c_0 {
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented but not a full featured OTG */
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	role-switch-default-mode = "peripheral";
+	srp-disable;
+	usb-role-switch;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+&iomuxc {
+	pinctrl_expander2_irq: expander2-irqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11		0x140 /* GPIO_P247 */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x16 /* DSI_RST */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD4__GPIO4_IO06		0x16 /* GPIO_P249 */
+			MX8MP_IOMUXC_SAI1_RXD5__GPIO4_IO07		0x16 /* GPIO_P251 */
+			MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09		0x16 /* GPIO_P255 */
+			MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16		0x16 /* DSI_BL_EN */
+			MX8MP_IOMUXC_SAI1_TXD5__GPIO4_IO17		0x16 /* DSI_VDDEN */
+		>;
+	};
+
+	pinctrl_hd3ss3220_irq: hd3ss3220-irqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08		0x41 /* GPIO_P253 */
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x1c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x1c2
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x10
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-edm-g.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-edm-g.dtsi
new file mode 100644
index 000000000000..3f1e0837f349
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-edm-g.dtsi
@@ -0,0 +1,786 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 TechNexion Ltd.
+ *
+ * Author: Ray Chang <ray.chang@technexion.com>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	i2c_0: i2c {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <100000>;
+		pinctrl-0 = <&pinctrl_i2c_brd_conf>;
+		pinctrl-names = "default";
+		scl-gpios = <&gpio4 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio4 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		eeprom: eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+			pagesize = <16>;
+		};
+	};
+
+	memory@40000000 {
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+		device_type = "memory";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VSD_3V3";
+		startup-delay-us = <100>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	rfkill {
+		compatible = "rfkill-gpio";
+		name = "rfkill";
+		pinctrl-0 = <&pinctrl_bt_ctrl>;
+		pinctrl-names = "default";
+		radio-type = "bluetooth";
+		shutdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	wl_reg_on: regulator-wl-reg-on {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <20000>;
+		pinctrl-0 = <&pinctrl_wifi_ctrl>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "WL_REG_ON";
+		startup-delay-us = <100>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_arm>;
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	num-cs = <1>;
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	pinctrl-names = "default";
+};
+
+&eqos {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-names = "default";
+	snps,force_thresh_dma_mode;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-assert-us = <35000>;
+			reset-deassert-us = <75000>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			realtek,clkout-disable;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0>;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <1>;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <2>;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <3>;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <4>;
+			snps,priority = <0xf0>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+};
+
+&flexcan2 {
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+
+		regulators {
+			BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <720000>;
+				regulator-name = "BUCK1";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_arm: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1025000>;
+				regulator-min-microvolt = <720000>;
+				regulator-name = "BUCK2";
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3600000>;
+				regulator-min-microvolt = <3000000>;
+				regulator-name = "BUCK4";
+			};
+
+			reg_buck5: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+				regulator-name = "BUCK5";
+			};
+
+			BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "BUCK6";
+			};
+
+			LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+				regulator-name = "LDO1";
+			};
+
+			LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1890000>;
+				regulator-min-microvolt = <1710000>;
+				regulator-name = "LDO3";
+			};
+
+			LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "LDO5";
+			};
+		};
+	};
+};
+
+&i2c2 {
+	/* I2C_B on EDMG */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-names = "default";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-names = "default";
+};
+
+&i2c4 {
+	/* I2C_A on EDMG */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-names = "default";
+};
+
+&i2c5 {
+	/* I2C_C on EDMG */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-names = "default";
+};
+
+&pcie {
+	pinctrl-0 = <&pinctrl_pcie>;
+	pinctrl-names = "default";
+	reset-gpio = <&gpio1 1 GPIO_ACTIVE_LOW>;
+};
+
+&pwm1 {
+	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-0 = <&pinctrl_pwm2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-0 = <&pinctrl_pwm3>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-0 = <&pinctrl_pwm4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sai2 {
+	/* AUD_B on EDMG */
+	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
+	assigned-clock-rates = <12288000>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	pinctrl-0 = <&pinctrl_sai2>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai3 {
+	/* AUD_A on EDMG */
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-rates = <12288000>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	pinctrl-0 = <&pinctrl_sai3>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&uart1 {
+	/* BT */
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	/* UART_A on EDMG, console */
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart3 {
+	/* UART_C on EDMG */
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-0 = <&pinctrl_uart3>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	/* UART_B on EDMG */
+	assigned-clocks = <&clk IMX8MP_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-0 = <&pinctrl_uart4>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc1 {
+	/* WIFI SDIO */
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC1>;
+	assigned-clock-rates = <200000000>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	vmmc-supply = <&wl_reg_on>;
+	status = "okay";
+};
+
+&usdhc2 {
+	/* SD card on baseboard */
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	/* eMMC on SOM */
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-0 = <&pinctrl_wdog>;
+	pinctrl-names = "default";
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+	pinctrl-names = "default";
+
+	pinctrl_bt_ctrl: bt-ctrlgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05	0x41 /* BT_REG_ON */
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x41 /* BT_WAKE_HOST */
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1csgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09	0x40000
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK	0x82
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI	0x82
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO	0x82
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC			0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO			0x23
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0		0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1		0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2		0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3		0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09			0x19
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12			0x19
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX		0x154
+			MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX		0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX		0x154
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x154
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x40000019
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001a3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001a3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001a3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001a3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL		0x400001a3
+			MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001a3
+		>;
+	};
+
+	pinctrl_i2c_brd_conf: i2cbrdconfgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x1c3 /* BRD_CONF_SCL, bitbang */
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x1c3 /* BRD_CONF_SDA, bitbang */
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x41 /* PCIE CLKREQ */
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x41 /* PCIE WAKE */
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01	0x41 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x41
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__PWM3_OUT		0x116
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT	0x116
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK	0xd6
+			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+			MX8MP_IOMUXC_UART4_RXD__UART2_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART4_TXD__UART2_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX	0x140
+			MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS	0x140
+			MX8MP_IOMUXC_SD1_RESET_B__UART3_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DCE_RX	0x140
+			MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DCE_TX	0x140
+			MX8MP_IOMUXC_ECSPI2_MISO__UART4_DCE_CTS	0x140
+			MX8MP_IOMUXC_ECSPI2_SS0__UART4_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xc6
+		>;
+	};
+
+	pinctrl_wifi_ctrl: wifi-ctrlgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00	0x41 /* WL_REG_ON */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x41 /* WL_WAKE_HOST */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-imx-lvds-hdmi-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-evk-imx-lvds-hdmi-common.dtsi
new file mode 100644
index 000000000000..44b30e9b3fde
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-imx-lvds-hdmi-common.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	lvds-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "J2";
+		type = "a";
+
+		port {
+			lvds2hdmi_connector_in: endpoint {
+				remote-endpoint = <&it6263_out>;
+			};
+		};
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtso b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtso
new file mode 100644
index 000000000000..4008d2fd36d6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtso
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include "imx8mp-evk-lvds0-imx-lvds-hdmi-common.dtsi"
+
+&it6263 {
+	ports {
+		port@0 {
+			reg = <0>;
+			dual-lvds-odd-pixels;
+
+			it6263_lvds_link1: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dual-lvds-even-pixels;
+
+			it6263_lvds_link2: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+	};
+};
+
+&lvds_bridge {
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&it6263_lvds_link1>;
+			};
+		};
+
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&it6263_lvds_link2>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-lvds-hdmi-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-lvds-hdmi-common.dtsi
new file mode 100644
index 000000000000..6eae7477abf8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-lvds-hdmi-common.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mp-evk-imx-lvds-hdmi-common.dtsi"
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	it6263: hdmi@4c {
+		compatible = "ite,it6263";
+		reg = <0x4c>;
+		data-mapping = "jeida-24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_en>;
+		reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		ivdd-supply = <&reg_buck5>;
+		ovdd-supply = <&reg_vext_3v3>;
+		txavcc18-supply = <&reg_buck5>;
+		txavcc33-supply = <&reg_vext_3v3>;
+		pvcc1-supply = <&reg_buck5>;
+		pvcc2-supply = <&reg_buck5>;
+		avcc-supply = <&reg_vext_3v3>;
+		anvdd-supply = <&reg_buck5>;
+		apvdd-supply = <&reg_buck5>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@2 {
+				reg = <2>;
+
+				it6263_out: endpoint {
+					remote-endpoint = <&lvds2hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-lvds-hdmi.dtso b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-lvds-hdmi.dtso
new file mode 100644
index 000000000000..9e11f261ad13
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-lvds-hdmi.dtso
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include "imx8mp-evk-lvds0-imx-lvds-hdmi-common.dtsi"
+
+&it6263 {
+	ports {
+		port@0 {
+			reg = <0>;
+
+			it6263_lvds_link1: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&lvds_bridge {
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&it6263_lvds_link1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtso b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtso
new file mode 100644
index 000000000000..af2e73e36a1b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtso
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include "imx8mp-evk-lvds1-imx-lvds-hdmi-common.dtsi"
+
+&it6263 {
+	ports {
+		port@0 {
+			reg = <0>;
+			dual-lvds-even-pixels;
+
+			it6263_lvds_link1: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dual-lvds-odd-pixels;
+
+			it6263_lvds_link2: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&lvds_bridge {
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&it6263_lvds_link2>;
+			};
+		};
+
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&it6263_lvds_link1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-lvds-hdmi-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-lvds-hdmi-common.dtsi
new file mode 100644
index 000000000000..8cc9d361c2a4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-lvds-hdmi-common.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mp-evk-imx-lvds-hdmi-common.dtsi"
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	it6263: hdmi@4c {
+		compatible = "ite,it6263";
+		reg = <0x4c>;
+		data-mapping = "jeida-24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_en>;
+		reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		ivdd-supply = <&reg_buck5>;
+		ovdd-supply = <&reg_vext_3v3>;
+		txavcc18-supply = <&reg_buck5>;
+		txavcc33-supply = <&reg_vext_3v3>;
+		pvcc1-supply = <&reg_buck5>;
+		pvcc2-supply = <&reg_buck5>;
+		avcc-supply = <&reg_vext_3v3>;
+		anvdd-supply = <&reg_buck5>;
+		apvdd-supply = <&reg_buck5>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@2 {
+				reg = <2>;
+
+				it6263_out: endpoint {
+					remote-endpoint = <&lvds2hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-lvds-hdmi.dtso b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-lvds-hdmi.dtso
new file mode 100644
index 000000000000..527a893a71b2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-lvds-hdmi.dtso
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include "imx8mp-evk-lvds1-imx-lvds-hdmi-common.dtsi"
+
+&it6263 {
+	ports {
+		port@0 {
+			reg = <0>;
+
+			it6263_lvds_link1: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+	};
+};
+
+&lvds_bridge {
+	ports {
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&it6263_lvds_link1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtso b/arch/arm64/boot/dts/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtso
new file mode 100644
index 000000000000..1b71890d43d5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtso
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	panel-lvds {
+		compatible = "koe,tx26d202vm0bwa";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_vext_3v3>;
+
+		panel-timing {
+			clock-frequency = <148500000>;
+			hactive = <1920>;
+			vactive = <1200>;
+			hfront-porch = <130>;
+			hback-porch = <70>;
+			hsync-len = <30>;
+			vfront-porch = <5>;
+			vback-porch = <5>;
+			vsync-len = <5>;
+			de-active = <1>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				dual-lvds-odd-pixels;
+
+				panel_in_odd: endpoint {
+					remote-endpoint = <&ldb_lvds_ch0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				dual-lvds-even-pixels;
+
+				panel_in_even: endpoint {
+					remote-endpoint = <&ldb_lvds_ch1>;
+				};
+			};
+		};
+	};
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_in_odd>;
+			};
+		};
+
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&panel_in_even>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index f6b017ab5f53..3730792daf50 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include "imx8mp.dtsi"
 
 / {
@@ -15,6 +16,28 @@
 		stdout-path = &uart2;
 	};
 
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 100000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <100>;
+		power-supply = <&reg_per_12v>;
+		status = "disabled";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -33,6 +56,53 @@
 		      <0x1 0x00000000 0 0xc0000000>;
 	};
 
+	native-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "HDMI OUT";
+		type = "a";
+
+		port {
+			hdmi_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_audio_pwr_reg>;
+		regulator-name = "audio-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_can1_stby: regulator-can1-stby {
 		compatible = "regulator-fixed";
 		regulator-name = "can1-stby";
@@ -55,6 +125,26 @@
 		enable-active-high;
 	};
 
+	reg_pcie0: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie0_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_per_12v: regulator-per-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "PER_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&pca6416 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -65,6 +155,127 @@
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	reg_vext_3v3: regulator-vext-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VEXT_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	audio_codec_bt_sco: audio-codec-bt-sco {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&audio_codec_bt_sco 1>;
+		};
+	};
+
+	sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			link-name = "micfil hifi";
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	sound-wm8960 {
+		compatible = "fsl,imx-audio-wm8960";
+		audio-asrc = <&easrc>;
+		audio-codec = <&wm8960>;
+		audio-cpu = <&sai3>;
+		audio-routing = "Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Ext Spk", "SPK_LP",
+			"Ext Spk", "SPK_LN",
+			"Ext Spk", "SPK_RP",
+			"Ext Spk", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"LINPUT3", "Mic Jack",
+			"Mic Jack", "MICB";
+		hp-det-gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		model = "wm8960-audio";
+		pinctrl-0 = <&pinctrl_hpdet>;
+		pinctrl-names = "default";
+	};
+
+	sound-xcvr {
+		compatible = "fsl,imx-audio-card";
+		model = "imx-audio-xcvr";
+
+		pri-dai-link {
+			link-name = "XCVR PCM";
+
+			cpu {
+				sound-dai = <&xcvr>;
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_vdev0vring0: vdev0vring0@942f0000 {
+			reg = <0 0x942f0000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0vring1: vdev0vring1@942f8000 {
+			reg = <0 0x942f8000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0buffer: vdev0buffer@94300000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x94300000 0 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
 };
 
 &A53_0 {
@@ -83,6 +294,25 @@
 	cpu-supply = <&reg_arm>;
 };
 
+&aud2htx {
+	status = "okay";
+};
+
+&dsp_reserved {
+	status = "okay";
+};
+
+&dsp {
+	memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
+			<&dsp_vdev0vring1>, <&dsp_reserved>;
+	status = "okay";
+};
+
+&easrc {
+	fsl,asrc-rate = <48000>;
+	status = "okay";
+};
+
 &eqos {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
@@ -111,7 +341,6 @@
 
 	mtl_tx_setup: tx-queues-config {
 		snps,tx-queues-to-use = <5>;
-		snps,tx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
@@ -213,6 +442,28 @@
 	status = "disabled";/* can2 pin conflict with pdm */
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -256,7 +507,7 @@
 				regulator-always-on;
 			};
 
-			BUCK5 {
+			reg_buck5: BUCK5 {
 				regulator-name = "BUCK5";
 				regulator-min-microvolt = <1650000>;
 				regulator-max-microvolt = <1950000>;
@@ -299,12 +550,71 @@
 	};
 };
 
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		adi,dsi-lanes = <4>;
+		avdd-supply = <&reg_buck5>;
+		dvdd-supply = <&reg_buck5>;
+		pvdd-supply = <&reg_buck5>;
+		a2vdd-supply = <&reg_buck5>;
+		v3p3-supply = <&reg_vext_3v3>;
+		v1p2-supply = <&reg_buck5>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+
+		};
+	};
+};
+
 &i2c3 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
+	wm8960: codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+		wlf,hp-cfg = <3 2 3>;
+		wlf,gpio-cfg = <1 3>;
+		AVDD-supply = <&reg_audio_3v3>;
+		DBVDD-supply = <&reg_audio_1v8>;
+		DCVDD-supply = <&reg_audio_1v8>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+		SPKVDD2-supply = <&reg_audio_pwr>;
+	};
+
 	pca6416: gpio@20 {
 		compatible = "ti,tca6416";
 		reg = <0x20>;
@@ -350,10 +660,117 @@
 	 */
 };
 
+&lcdif1 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&micfil {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX8MP_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <196608000>;
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7535_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&mu2 {
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie0>;
+	status = "okay";
+};
+
+&pcie0_ep {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
 
+&uart1 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
 &uart2 {
 	/* console */
 	pinctrl-names = "default";
@@ -376,6 +793,15 @@
 	status = "okay";
 };
 
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
 &usdhc2 {
 	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
 	assigned-clock-rates = <400000000>;
@@ -408,7 +834,21 @@
 	status = "okay";
 };
 
+&xcvr {
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
 &iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audio_pwr_reg: audiopwrreggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29		0xd6
+		>;
+	};
+
 	pinctrl_eqos: eqosgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x2
@@ -475,12 +915,43 @@
 		>;
 	};
 
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK           0x1c2
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B        0x82
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00      0x82
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01      0x82
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02      0x82
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03      0x82
+		>;
+	};
+
 	pinctrl_gpio_led: gpioledgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x140
 		>;
 	};
 
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x1c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x1c2
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x10
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000010
+		>;
+	};
+
+	pinctrl_hpdet: hpdetgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0xd6
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
@@ -488,6 +959,13 @@
 		>;
 	};
 
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
@@ -502,6 +980,35 @@
 		>;
 	};
 
+	pinctrl_lvds_en: lvdsengrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x1c0
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x60 /* open drain, pull up */
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07	0x40
+		>;
+	};
+
+	pinctrl_pcie0_reg: pcie0reggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x40
+		>;
+	};
+
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_PDM_CLK		0xd6
+			MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_PDM_BIT_STREAM00	0xd6
+			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_PDM_BIT_STREAM01	0xd6
+			MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_PDM_BIT_STREAM02	0xd6
+			MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_PDM_BIT_STREAM03	0xd6
+		>;
+	};
+
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x000001c0
@@ -514,12 +1021,58 @@
 		>;
 	};
 
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT	0x116
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
 		>;
 	};
 
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
@@ -533,6 +1086,15 @@
 		>;
 	};
 
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
+			MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS		0x140
+			MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS		0x140
+		>;
+	};
+
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-mate.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-mate.dts
new file mode 100644
index 000000000000..00614f5d58ea
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-mate.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP HummingBoard Mate";
+	compatible = "solidrun,imx8mp-hummingboard-mate",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		/delete-property/ ethernet1;
+	};
+};
+
+&fec {
+	/* this board does not use second phy / ethernet on SoM */
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&mikro_rst_pins>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pro.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pro.dts
new file mode 100644
index 000000000000..36cd452f1583
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pro.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-codec.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+#include "imx8mp-hummingboard-pulse-m2con.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP HummingBoard Pro";
+	compatible = "solidrun,imx8mp-hummingboard-pro",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&hdmi_pins>,
+		    <&m2_wwan_wake_pins>;
+};
+
+&pcie {
+	pinctrl-0 = <&m2_reset_pins>;
+	pinctrl-names = "default";
+	reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	status = "okay";
+};
+
+&phy0 {
+	leds {
+		/* ADIN1300 LED_0 pin */
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		/delete-node/ led@1;
+	};
+};
+
+&phy1 {
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* ADIN1300 LED_0 pin */
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-codec.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-codec.dtsi
new file mode 100644
index 000000000000..77402a3db9ef
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-codec.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+	sound-wm8904 {
+		compatible = "fsl,imx-audio-wm8904";
+		model = "audio-wm8904";
+		audio-cpu = <&sai3>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"AMIC", "MICBIAS",
+			"IN2R", "AMIC";
+	};
+};
+
+&i2c2 {
+	codec: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+		clock-names = "mclk";
+		AVDD-supply = <&v_1_8>;
+		CPVDD-supply = <&v_1_8>;
+		DBVDD-supply = <&v_3_3>;
+		DCVDD-supply = <&v_1_8>;
+		MICVDD-supply = <&v_3_3>;
+	};
+};
+
+&iomuxc {
+	sai3_pins: pinctrl-sai3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+		>;
+	};
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sai3_pins>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_IPG>, <&clk IMX8MP_CLK_DUMMY>,
+		 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>, <&clk IMX8MP_CLK_DUMMY>,
+		 <&clk IMX8MP_CLK_DUMMY>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi
new file mode 100644
index 000000000000..825ad6a2ba14
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		rtc0 = &carrier_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led-0 {
+			label = "D30";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "D31";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-2 {
+			label = "D32";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-3 {
+			label = "D33";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-4 {
+			label = "D34";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	rfkill-mpcie-wifi {
+		/*
+		 * The mpcie connector only has USB,
+		 * therefore this rfkill is for cellular radios only.
+		 */
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mpcie_rfkill_pins>;
+		label = "mpcie radio";
+		radio-type = "wwan";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	vmmc: regulator-mmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc_pins>;
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <250>;
+	};
+
+	vbus1: regulator-vbus-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus1";
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus1_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vbus2: regulator-vbus-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus2";
+		gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus2_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	v_1_2: regulator-1-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	vmpcie {
+		/* supplies mpcie and m2 connectors */
+		compatible = "regulator-fixed";
+		regulator-name = "vmpcie";
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmpcie_pins>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+/* mikrobus spi */
+&ecspi2 {
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_spi_pins>;
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-0 = <&mpcie_reset_pins>;
+	pinctrl-names = "default";
+
+	mpcie-reset-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "mpcie-reset";
+	};
+};
+
+&i2c3 {
+	carrier_eeprom: eeprom@57{
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+
+	carrier_rtc: rtc@69 {
+		compatible = "abracon,ab1805";
+		reg = <0x69>;
+		abracon,tc-diode = "schottky";
+		abracon,tc-resistor = <3>;
+	};
+};
+
+&iomuxc {
+	csi_pins: pinctrl-csi-grp {
+		fsl,pins = <
+			/* Pin 24: STROBE */
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07		0x0
+		>;
+	};
+
+	led_pins: pinctrl-led-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x0
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21		0x0
+			MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23		0x0
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24		0x0
+			MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28		0x0
+		>;
+	};
+
+	mikro_int_pins: pinctrl-mikro-int-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x0
+		>;
+	};
+
+	mikro_pwm_pins: pinctrl-mikro-pwm-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08		0x0
+		>;
+	};
+
+	mikro_rst_pins: pinctrl-mikro-rst-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30		0x0
+		>;
+	};
+
+	mikro_spi_pins: pinctrl-mikro-spi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0		0x40000
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82
+		>;
+	};
+
+	mikro_uart_pins: pinctrl-mikro-uart-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
+		>;
+	};
+
+	mpcie_reset_pins: pinctrl-mpcie-reset-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x0
+		>;
+	};
+
+	mpcie_rfkill_pins: pinctrl-pcie-rfkill-grp {
+		fsl,pins = <
+			/* weak i/o, open drain */
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x20
+		>;
+	};
+
+	usb_hub_pins: pinctrl-usb-hub-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11		0x0
+		>;
+	};
+
+	usdhc2_pins: pinctrl-usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	usdhc2_100mhz_pins: pinctrl-usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	usdhc2_200mhz_pins: pinctrl-usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	vbus1_pins: pinctrl-vbus-1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x20
+		>;
+	};
+
+	vbus2_pins: pinctrl-vbus-2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x20
+		>;
+	};
+
+	vmmc_pins: pinctrl-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x41
+		>;
+	};
+
+	vmpcie_pins: pinctrl-vmpcie-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x0
+		>;
+	};
+};
+
+&phy0 {
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* ADIN1300 LED_0 pin */
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		/* ADIN1300 LINK_ST pin */
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* mikrobus uart */
+&uart3 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+	vbus-supply = <&vbus2>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&vbus1>;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_hub_pins>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb4b4,6502", "usb4b4,6506";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&v_1_2>;
+		vdd2-supply = <&v_3_3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb4b4,6500", "usb4b4,6504";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&v_1_2>;
+		vdd2-supply = <&v_3_3>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&usdhc2_pins>;
+	pinctrl-1 = <&usdhc2_100mhz_pins>;
+	pinctrl-2 = <&usdhc2_200mhz_pins>;
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+	cap-power-off-card;
+	full-pwr-cycle;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-hdmi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-hdmi.dtsi
new file mode 100644
index 000000000000..d7a999c0d7e0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-hdmi.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+	sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&iomuxc {
+	hdmi_pins: pinctrl-hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x154
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x154
+		>;
+	};
+};
+
+&lcdif3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-m2con.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-m2con.dtsi
new file mode 100644
index 000000000000..8d8d8d2e3da8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-m2con.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+	rfkill-m2-gnss {
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&m2_gnss_rfkill_pins>;
+		label = "m.2 GNSS";
+		radio-type = "gps";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* M.2 is B-keyed, so w-disable is for WWAN */
+	rfkill-m2-wwan {
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&m2_wwan_rfkill_pins>;
+		label = "m.2 WWAN";
+		radio-type = "wwan";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&iomuxc {
+	m2_gnss_rfkill_pins: pinctrl-m2-gnss-rfkill-grp {
+		fsl,pins = <
+			/* weak i/o, open drain */
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x20
+		>;
+	};
+
+	m2_reset_pins: pinctrl-m2-reset-grp {
+		fsl,pins = <
+			/*
+			 * 3.3V domain on SoC, set open-drain to ensure
+			 * 1.8V logic on connector
+			 */
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x20
+		>;
+	};
+
+	m2_wwan_rfkill_pins: pinctrl-m2-wwan-rfkill-grp {
+		fsl,pins = <
+			/* weak i/o, open drain */
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x20
+		>;
+	};
+
+	m2_wwan_wake_pins: pinctrl-m2-wwan-wake-grp {
+		fsl,pins = <
+			/* weak i/o, open drain */
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x20
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-mini-hdmi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-mini-hdmi.dtsi
new file mode 100644
index 000000000000..46916ddc0533
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-mini-hdmi.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "c";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>, <0x3f>, <0x3c>, <0x38>;
+		reg-names = "main", "edid", "cec", "packet";
+		adi,dsi-lanes = <4>;
+		avdd-supply = <&v_1_8>;
+		dvdd-supply = <&v_1_8>;
+		pvdd-supply = <&v_1_8>;
+		a2vdd-supply = <&v_1_8>;
+		v3p3-supply = <&v_3_3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mini_hdmi_pins>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_from_dsim: endpoint {
+					remote-endpoint = <&dsim_to_adv7535>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&iomuxc {
+	mini_hdmi_pins: pinctrl-mini-hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x0
+		>;
+	};
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	port@1 {
+		dsim_to_adv7535: endpoint {
+			remote-endpoint = <&adv7535_from_dsim>;
+			attach-bridge;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse.dts
new file mode 100644
index 000000000000..d32844c3af05
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-codec.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+#include "imx8mp-hummingboard-pulse-m2con.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP HummingBoard Pulse";
+	compatible = "solidrun,imx8mp-hummingboard-pulse",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &pcie_eth;
+	};
+};
+
+&fec {
+	/* this board does not use second phy / ethernet on SoM */
+	status = "disabled";
+};
+
+&gpio1 {
+	pinctrl-0 = <&mpcie_reset_pins>, <&m2_reset_pins>;
+	pinctrl-names = "default";
+
+	m2-reset-hog {
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-reset";
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&hdmi_pins>,
+		    <&m2_wwan_wake_pins>;
+
+	pcie_eth_pins: pinctrl-pcie-eth-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x0
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-0 = <&pcie_eth_pins>;
+	pinctrl-names = "default";
+	reset-gpio = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	root@0,0 {
+		compatible = "pci16c3,abcd";
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		/* Intel i210 */
+		pcie_eth: ethernet@1,0 {
+			compatible = "pci8086,157b";
+			reg = <0x00010000 0 0 0 0>;
+		};
+	};
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-ripple.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-ripple.dts
new file mode 100644
index 000000000000..4ce5b799b6ab
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-ripple.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP HummingBoard Ripple";
+	compatible = "solidrun,imx8mp-hummingboard-ripple",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		/delete-property/ ethernet1;
+	};
+};
+
+&fec {
+	/* this board does not use second phy / ethernet on SoM */
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&mikro_rst_pins>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts
index dd703b6a5e17..a02b31c42db4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) 2018 NXP
  * Copyright (c) 2019 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi
index 5116079cce22..a6319824ea2e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) 2018 NXP
  * Copyright (c) 2019 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 / {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts b/arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts
new file mode 100644
index 000000000000..f48cf22b423d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-iota2-lumpy.dts
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Y Soft
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+
+/ {
+	compatible = "ysoft,imx8mp-iota2-lumpy", "fsl,imx8mp";
+	model = "Y Soft i.MX8MPlus IOTA2 Lumpy board";
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm4 0 500000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+		pinctrl-names = "default";
+
+		button-reset {
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			label = "Factory RESET";
+			linux,code = <BTN_0>;
+		};
+	};
+
+	reg_usb_host: regulator-usb-host {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&pinctrl_usb_host_vbus>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-host";
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	memory@40000000 {
+		reg = <0x0 0x40000000 0 0x80000000>,
+		      <0x1 0x00000000 0 0x80000000>;
+		device_type = "memory";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_arm>;
+};
+
+&eqos {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&gpio3>;
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			pinctrl-names = "default";
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+			micrel,led-mode = <0>;
+		};
+	};
+};
+
+&fec {
+	fsl,magic-packet;
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@0 {
+			reg = <0>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&gpio3>;
+			pinctrl-0 = <&pinctrl_ethphy1>;
+			pinctrl-names = "default";
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+			micrel,led-mode = <0>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio1>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+
+		regulators {
+			BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <720000>;
+				regulator-name = "BUCK1";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_arm: BUCK2 {
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1025000>;
+				regulator-min-microvolt = <720000>;
+				regulator-name = "BUCK2";
+				regulator-ramp-delay = <3125>;
+			};
+
+			BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3600000>;
+				regulator-min-microvolt = <3000000>;
+				regulator-name = "BUCK4";
+			};
+
+			BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+				regulator-name = "BUCK5";
+			};
+
+			BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "BUCK6";
+			};
+
+			LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+				regulator-name = "LDO1";
+			};
+
+			LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1890000>;
+				regulator-min-microvolt = <1710000>;
+				regulator-name = "LDO3";
+			};
+
+			LDO4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <950000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "LDO4";
+			};
+
+			LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "LDO5";
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "dallas,ds1341";
+		reg = <0x68>;
+	};
+};
+
+&pwm4 {
+	pinctrl-0 = <&pinctrl_pwm4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb_host>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-0 = <&pinctrl_wdog>;
+	pinctrl-names = "default";
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+		>;
+	};
+
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x10
+			MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22		0x10
+		>;
+	};
+
+	pinctrl_ethphy1: ethphy1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x10
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x10
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x2
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x2
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x90
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x90
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x16
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x16
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x16
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x16
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x16
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x16
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07	0x80
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x1c0
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT	0x102
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x0
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x0
+		>;
+	};
+
+	pinctrl_usb_host_vbus: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR	0x0
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x166
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
new file mode 100644
index 000000000000..614b4ce330b1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mp-kontron-osm-s.dtsi"
+
+/ {
+	model = "Kontron BL i.MX8MP OSM-S";
+	compatible = "kontron,imx8mp-bl-osm-s", "kontron,imx8mp-osm-s", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+	};
+
+	extcon_usbc: usbc {
+		compatible = "linux,extcon-usb-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_id>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	pwm-beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm2 0 5000 0>;
+	};
+
+	reg_vcc_panel: regulator-vcc-panel {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCC_PANEL";
+	};
+};
+
+&ecspi2 {
+	status = "okay";
+
+	eeram@0 {
+		compatible = "microchip,48l640";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&eqos {	/* Second ethernet (OSM-S ETH_B) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos_rgmii>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-id4f51.e91b";
+			reg = <1>;
+			pinctrl-0 = <&pinctrl_ethphy1>;
+			pinctrl-names = "default";
+			reset-assert-us = <10000>;
+			reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fec { /* First ethernet (OSM-S ETH_A) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_rgmii>;
+	phy-connection-type = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-id4f51.e91b";
+			reg = <1>;
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			pinctrl-names = "default";
+			reset-assert-us = <10000>;
+			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+/*
+ * Rename SoM signals according to board usage:
+ *   SDIO_A_PWR_EN -> CAN_ADDR2
+ *   SDIO_A_WP     -> CAN_ADDR3
+ */
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>;
+	gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "",
+			  "SDIO_A_CD", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0",
+			  "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "CAN_ADDR2",
+			  "CAN_ADDR3";
+};
+
+/*
+ * Rename SoM signals according to board usage:
+ *   GPIO_B_0      -> IO_EXP_INT
+ *   GPIO_B_1      -> IO_EXP_RST
+ */
+&gpio3 {
+	gpio-line-names = "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_A_PERST", "SDIO_B_D5",
+			  "SDIO_B_D6", "SDIO_B_D7", "SPI_A_WP", "SPI_A_HOLD",
+			  "UART_B_RTS", "UART_B_CTS", "SDIO_B_D0", "SDIO_B_D1",
+			  "SDIO_B_D2", "SDIO_B_D3", "SDIO_B_WP", "SDIO_B_D4",
+			  "PCIE_SM_ALERT", "SDIO_B_CLK", "SDIO_B_CMD", "IO_EXP_INT",
+			  "IO_EXP_RST", "", "BOOT_SEL0", "BOOT_SEL1",
+			  "", "", "SDIO_B_CD", "SDIO_B_PWR_EN",
+			  "HDMI_CEC", "HDMI_HPD";
+};
+
+/*
+ * Rename SoM signals according to board usage and remove labels for unsed pins:
+ *   GPIO_A_6      -> TFT_RESET
+ *   GPIO_A_7      -> TFT_STBY
+ *   GPIO_B_3      -> CSI_ENABLE
+ *   GPIO_B_2      -> USB_HUB_RST
+ */
+&gpio4 {
+	gpio-line-names = "", "", "", "",
+			  "ETH_A_MDC", "ETH_A_MDIO", "ETH_A_RXD0", "ETH_A_RXD1",
+			  "ETH_A_RXD2", "ETH_A_RXD3", "ETH_A_RX_DV", "ETH_A_RX_CLK",
+			  "ETH_A_TXD0", "ETH_A_TXD1", "ETH_A_TXD2", "ETH_A_TXD3",
+			  "ETH_A_TX_EN", "ETH_A_TX_CLK", "CSI_ENABLE", "",
+			  "USB_HUB_RST", "TFT_RESET", "CAN_A_TX", "UART_A_CTS",
+			  "UART_A_RTS", "CAN_A_RX", "CAN_B_TX", "CAN_B_RX",
+			  "TFT_STBY", "CARRIER_PWR_EN", "I2S_A_DATA_IN", "I2S_LRCLK";
+};
+
+/*
+ * Rename SoM signals according to board usage:
+ *   SPI_A_SDI	-> CAN_ADDR0
+ *   SPI_A_SDO	-> CAN_ADDR1
+ */
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio5>;
+	gpio-line-names = "I2S_BITCLK", "I2S_A_DATA_OUT", "I2S_MCLK", "PWM_2",
+			  "PWM_1", "PWM_0", "SPI_A_SCK", "CAN_ADDR1",
+			  "CAN_ADDR0", "SPI_A_CS0", "SPI_B_SCK", "SPI_B_SDO",
+			  "SPI_B_SDI", "SPI_B_CS0", "I2C_A_SCL", "I2C_A_SDA",
+			  "I2C_B_SCL", "I2C_B_SDA", "PCIE_SMCLK", "PCIE_SMDAT",
+			  "I2C_CAM_SCL", "I2C_CAM_SDA", "UART_A_RX", "UART_A_TX",
+			  "UART_C_RX", "UART_C_TX", "UART_CON_RX", "UART_CON_TX",
+			  "UART_B_RX", "UART_B_TX";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	gpio_expander_dio: io-expander@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "DIO1_OUT","DIO1_IN", "DIO2_OUT","DIO2_IN",
+				  "DIO3_OUT","DIO3_IN", "DIO4_OUT","DIO4_IN";
+		interrupt-parent = <&gpio3>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&reg_usdhc2_vcc {
+	status = "disabled";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	linux,rs485-enabled-at-boot-time;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	extcon = <&extcon_usbc>;
+	usb-role-switch;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	dr_mode = "host";
+	status = "okay";
+
+	usb-hub@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		reset-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x46
+		>;
+	};
+
+	pinctrl_ethphy1: ethphy1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x46
+		>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x46
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20			0x46
+		>;
+	};
+
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MOSI__GPIO5_IO07		0x46 /* CAN_ADR0 */
+			MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08		0x46 /* CAN_ADR1 */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
new file mode 100644
index 000000000000..a3cba41d2b53
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2023 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mp-pinfunc.h"
+
+&{/} {
+	model = "Kontron DL i.MX8MP OSM-S";
+	compatible = "kontron,imx8mp-bl-osm-s", "kontron,imx8mp-osm-s", "fsl,imx8mp";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <100>;
+	};
+
+	panel {
+		compatible = "jenson,bl-jt60050-01a", "panel-lvds";
+		backlight = <&backlight>;
+		data-mapping = "vesa-24";
+		enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_vcc_panel>;
+		height-mm = <86>;
+		width-mm = <154>;
+
+		panel-timing {
+			clock-frequency = <50000000>;
+			hactive = <1024>;
+			hback-porch = <160>;
+			hfront-porch = <160>;
+			hsync-len = <1>;
+			vactive = <600>;
+			vback-porch = <23>;
+			vfront-porch = <12>;
+			vsync-len = <1>;
+		};
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>, <&pinctrl_panel_stby>;
+
+	panel-rst-hog {
+		gpio-hog;
+		gpios = <21 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "panel-reset";
+	};
+
+	panel-stby-hog {
+		gpio-hog;
+		gpios = <28 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "panel-standby";
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt928";
+		reg = <0x5d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <6 8>;
+		irq-gpios = <&gpio1 6 0>;
+		AVDD28-supply = <&reg_vcc_panel>;
+		VDDIO-supply = <&reg_vcc_panel>;
+		reset-gpios = <&gpio1 7 0>;
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&ldb_lvds_ch0 {
+	remote-endpoint = <&panel_in_lvds0>;
+};
+
+&lvds_bridge {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_panel_stby: panelstbygrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x19
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
new file mode 100644
index 000000000000..b97bfeb1c30f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
@@ -0,0 +1,909 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Kontron OSM-S i.MX8MP";
+	compatible = "kontron,imx8mp-osm-s", "fsl,imx8mp";
+
+	aliases {
+		rtc0 = &rv3028;
+		rtc1 = &snvs_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/*
+		 * There are multiple SoM flavors with different DDR sizes.
+		 * The smallest is 1GB. For larger sizes the bootloader will
+		 * update the reg property.
+		 */
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_vbus>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "VBUS_USB_A";
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_vbus>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "VBUS_USB_B";
+	};
+
+	reg_usdhc2_vcc: regulator-usdhc2-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vcc>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VCC_SDIO_A";
+	};
+
+	reg_usdhc3_vcc: regulator-usdhc3-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc3_vcc>;
+		gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VCC_SDIO_B";
+	};
+
+	reg_vdd_carrier: regulator-vdd-carrier {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "VDD_CARRIER";
+
+		regulator-state-standby {
+			regulator-on-in-suspend;
+		};
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+
+		regulator-state-disk {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&ecspi1 { /* OSM-S SPI_A */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+};
+
+&ecspi2 { /* OSM-S SPI_B */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+};
+
+&flexcan1 { /* OSM-S CAN_A */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+&flexcan2 { /* OSM-S CAN_B */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+	gpio-line-names = "GPIO_A_0", "GPIO_A_1", "", "",
+			  "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4",
+			  "GPIO_A_5", "USB_B_EN", "USB_A_ID", "USB_B_ID",
+			  "USB_A_EN", "USB_A_OC","CAM_MCK", "USB_B_OC",
+			  "ETH_B_MDC", "ETH_B_MDIO", "ETH_B_TXD3", "ETH_B_TXD2",
+			  "ETH_B_TXD1", "ETH_B_TXD0", "ETH_B_TX_EN", "ETH_B_TX_CLK",
+			  "ETH_B_RX_DV", "ETH_B_RX_CLK", "ETH_B_RXD0", "ETH_B_RXD1",
+			  "ETH_B_RXD2", "ETH_B_RXD3";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "",
+			  "SDIO_A_CD", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0",
+			  "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "SDIO_A_PWR_EN",
+			  "SDIO_A_WP";
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3>;
+	gpio-line-names = "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_A_PERST", "SDIO_B_D5",
+			  "SDIO_B_D6", "SDIO_B_D7", "SPI_A_WP", "SPI_A_HOLD",
+			  "UART_B_RTS", "UART_B_CTS", "SDIO_B_D0", "SDIO_B_D1",
+			  "SDIO_B_D2", "SDIO_B_D3", "SDIO_B_WP", "SDIO_B_D4",
+			  "PCIE_SM_ALERT", "SDIO_B_CLK", "SDIO_B_CMD", "GPIO_B_0",
+			  "GPIO_B_1", "", "BOOT_SEL0", "BOOT_SEL1",
+			  "", "", "SDIO_B_CD", "SDIO_B_PWR_EN",
+			  "HDMI_CEC", "HDMI_HPD";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+	gpio-line-names = "GPIO_B_5", "GPIO_B_6", "GPIO_B_7", "GPIO_C_0",
+			  "ETH_A_MDC", "ETH_A_MDIO", "ETH_A_RXD0", "ETH_A_RXD1",
+			  "ETH_A_RXD2", "ETH_A_RXD3", "ETH_A_RX_DV", "ETH_A_RX_CLK",
+			  "ETH_A_TXD0", "ETH_A_TXD1", "ETH_A_TXD2", "ETH_A_TXD3",
+			  "ETH_A_TX_EN", "ETH_A_TX_CLK", "GPIO_B_3", "GPIO_B_4",
+			  "GPIO_B_2", "GPIO_A_6", "CAN_A_TX", "UART_A_CTS",
+			  "UART_A_RTS", "CAN_A_RX", "CAN_B_TX", "CAN_B_RX",
+			  "GPIO_A_7", "CARRIER_PWR_EN", "I2S_A_DATA_IN", "I2S_LRCLK";
+};
+
+&gpio5 {
+	gpio-line-names = "I2S_BITCLK", "I2S_A_DATA_OUT", "I2S_MCLK", "PWM_2",
+			  "PWM_1", "PWM_0", "SPI_A_SCK", "SPI_A_SDO",
+			  "SPI_A_SDI", "SPI_A_CS0", "SPI_B_SCK", "SPI_B_SDO",
+			  "SPI_B_SDI", "SPI_B_CS0", "I2C_A_SCL", "I2C_A_SDA",
+			  "I2C_B_SCL", "I2C_B_SDA", "PCIE_SMCLK", "PCIE_SMDAT",
+			  "I2C_CAM_SCL", "I2C_CAM_SDA", "UART_A_RX", "UART_A_TX",
+			  "UART_C_RX", "UART_C_TX", "UART_CON_RX", "UART_CON_TX",
+			  "UART_B_RX", "UART_B_TX";
+};
+
+&i2c1 { /* OSM-S I2C_A */
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c2 { /* OSM-S I2C_B */
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c3 { /* OSM-S PCIe SMDAT/SMCLK */
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c4 { /* OSM-S I2C_CAM */
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c5 { /* PMIC, EEPROM, RTC */
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		nxp,i2c-lt-enable;
+
+		regulators {
+			reg_vdd_soc: BUCK1 { /* dual phase with BUCK3 */
+				regulator-name = "+0V8_VDD_SOC (BUCK1)";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-name = "+0V9_VDD_ARM (BUCK2)";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-name = "+3V3 (BUCK4)";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-name = "+1V8 (BUCK5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_dram: BUCK6 {
+				regulator-name = "+1V1_NVCC_DRAM (BUCK6)";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_snvs: LDO1 {
+				regulator-name = "+1V8_NVCC_SNVS (LDO1)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdda: LDO3 {
+				regulator-name = "+1V8_VDDA (LDO3)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_sd: LDO5 {
+				regulator-name = "NVCC_SD (LDO5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "onnn,n24s64b", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		size = <8192>;
+		num-addresses = <1>;
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio3 24 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pwm1 { /* OSM-S PWM_0 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm2 { /* OSM-S PWM_1 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+&pwm3 { /* OSM-S PWM_2 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&sai3 { /* OSM-S I2S_A */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+};
+
+&uart1 { /* OSM-S UART_A */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 { /* OSM-S UART_C */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&uart3 { /* OSM-S UART_CON */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 { /* OSM-S UART_B */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+&usb3_0 { /* OSM-S USB_A */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_oc>;
+	fsl,over-current-active-low;
+};
+
+&usb3_1 { /* OSM-S USB_B */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb2_oc>;
+	fsl,over-current-active-low;
+};
+
+&usdhc1 { /* eMMC */
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 { /* OSM-S SDIO_A */
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>, <&pinctrl_usdhc2_wp>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>, <&pinctrl_usdhc2_wp>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>, <&pinctrl_usdhc2_wp>;
+	vmmc-supply = <&reg_usdhc2_vcc>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+};
+
+&usdhc3 { /* OSM-S SDIO_B */
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_gpio>;
+	vmmc-supply = <&reg_usdhc3_vcc>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_csi_mck: csimckgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1		0x59 /* CAM_MCK */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x44 /* SPI_A_SDI_(IO0) */
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x44 /* SPI_A_SDO_(IO1) */
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x44 /* SPI_A_SCK */
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x40 /* SPI_A_CS0# */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x44 /* SPI_B_SDI */
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x44 /* SPI_B_SDO */
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x44 /* SPI_B_SCK */
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x40 /* SPI_B_CS0# */
+		>;
+	};
+
+	pinctrl_enet_rgmii: enetrgmiigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3 /* ETH_MDC */
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3 /* ETH_MDIO */
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91 /* ETH_A_(S)(R)(G)MII_RXD0 */
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91 /* ETH_A_(S)(R)(G)MII_RXD1 */
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91 /* ETH_A_(R)(G)MII_RXD2 */
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91 /* ETH_A_(R)(G)MII_RXD3 */
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91 /* ETH_A_(R)(G)MII_RX_CLK */
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91 /* ETH_A_(R)(G)MII_RX_DV(_ER) */
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f /* ETH_A_(S)(R)(G)MII_TXD0 */
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f /* ETH_A_(S)(R)(G)MII_TXD1 */
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f /* ETH_A_(S)(R)(G)MII_TXD2 */
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f /* ETH_A_(S)(R)(G)MII_TXD3 */
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f /* ETH_A_(R)(G)MII_TX_CLK */
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f /* ETH_A_(R)(G)MII_TX_EN(_ER) */
+		>;
+	};
+
+	pinctrl_eqos_rgmii: eqosrgmiigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3 /* ETH_B_MDC */
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3 /* ETH_B_MDIO */
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91 /* ETH_B_(S)(R)(G)MII_RXD0 */
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91 /* ETH_B_(S)(R)(G)MII_RXD1 */
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91 /* ETH_B_(R)(G)MII_RXD2 */
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91 /* ETH_B_(R)(G)MII_RXD3 */
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 /* ETH_B_(R)(G)MII_RX_CLK */
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91 /* ETH_B_(R)(G)MII_RX_DV(_ER) */
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f /* ETH_B_(S)(R)(G)MII_TXD0 */
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f /* ETH_B_(S)(R)(G)MII_TXD1 */
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f /* ETH_B_(S)(R)(G)MII_TXD2 */
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f /* ETH_B_(S)(R)(G)MII_TXD3 */
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f /* ETH_B_(R)(G)MII_TX_CLK */
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f /* ETH_B_(R)(G)MII_TX_EN(_ER) */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__CAN1_TX			0x154 /* CAN_A_TX */
+			MX8MP_IOMUXC_SAI2_TXC__CAN1_RX			0x154 /* CAN_A_RX */
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX			0x154 /* CAN_B_TX */
+			MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX			0x154 /* CAN_B_RX */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x19 /* GPIO_A_0 */
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x19 /* GPIO_A_1 */
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x19 /* GPIO_A_2 */
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x19 /* GPIO_A_3 */
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x19 /* GPIO_A_4 */
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x19 /* GPIO_A_5 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01		0x19 /* GPIO_A_7 */
+			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x19 /* GPIO_B_0 */
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x19 /* GPIO_B_1 */
+			MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22		0x19 /* BOOT_SEL0# */
+			MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23		0x19 /* BOOT_SEL1# */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x19 /* GPIO_B_5 */
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x19 /* GPIO_B_6 */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x19 /* GPIO_B_7 */
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x19 /* GPIO_C_0 */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x19 /* GPIO_B_3 */
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x19 /* GPIO_B_4 */
+			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20		0x19 /* GPIO_B_2 */
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21		0x19 /* GPIO_A_6 */
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x19 /* HDMI_HPD */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x40000084 /* I2C_A_SCL */
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x40000084 /* I2C_A_SDA */
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x84 /* I2C_A_SCL */
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x84 /* I2C_A_SDA */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL			0x40000084 /* I2C_B_SCL */
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA			0x40000084 /* I2C_B_SDA */
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x84 /* I2C_B_SCL */
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x84 /* I2C_B_SDA */
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x40000084 /* PCIe_SMCLK */
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x40000084 /* PCIe_SMDAT */
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x84 /* PCIe_SMCLK */
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x84 /* PCIe_SMDAT */
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL			0x40000084 /* I2C_CAM_SCL/CSI_TX_P */
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA			0x40000084 /* I2C_CAM_SDA/CSI_TX_N */
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20		0x84 /* I2C_CAM_SCL/CSI_TX_P */
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21		0x84 /* I2C_CAM_SDA/CSI_TX_N */
+		>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL		0x40000084
+			MX8MP_IOMUXC_SAI5_MCLK__I2C5_SDA		0x40000084
+		>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x84
+			MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25		0x84
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__PCIE_CLKREQ_B		0x19 /* PCIe_CLKREQ# */
+			MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02		0x19 /* PCIe_A_PERST# */
+			MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00		0x19 /* PCIe_WAKE# */
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16		0x19 /* PCIe_SM_ALERT */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x1c0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT		0x6 /* PWM_0 */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__PWM2_OUT			0x6 /* PWM_1 */
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT			0x6 /* PWM_2 */
+		>;
+	};
+
+	pinctrl_reg_usb1_vbus: regusb1vbusgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x19 /* USB_A_EN */
+		>;
+	};
+
+	pinctrl_reg_usb2_vbus: regusb2vbusgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x19 /* USB_B_EN */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vcc: regusdhc2vccgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x19 /* SDIO_A_PWR_EN */
+		>;
+	};
+
+	pinctrl_reg_usdhc3_vcc: regusdhc3vccgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27		0x19 /* SDIO_B_PWR_EN */
+		>;
+	};
+
+	pinctrl_reg_vdd_carrier: regvddcarriergrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29		0x19 /* CARRIER_PWR_EN */
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24		0x1c0
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00		0xd6 /* I2S_A_DATA_IN */
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00		0xd6 /* I2S_A_DATA_OUT */
+			MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_DATA01		0xd6 /* I2S_B_DATA_IN */
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_DATA01		0xd6 /* I2S_B_DATA_OUT */
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK		0xd6 /* I2S_MCLK */
+			MX8MP_IOMUXC_NAND_DATA01__AUDIOMIX_SAI3_TX_SYNC		0xd6 /* I2S_LRCLK */
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK		0xd6 /* I2S_BITCLK */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX		0x140 /* UART_A_RX */
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX		0x140 /* UART_A_TX */
+			MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS		0x140 /* UART_A_CTS */
+			MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS		0x140 /* UART_A_RTS */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x140 /* UART_C_RX */
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x140 /* UART_C_TX */
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x140 /* UART_CON_RX */
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x140 /* UART_CON_TX */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DATA00__UART4_DCE_RX		0x140 /* UART_B_RX */
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x140 /* UART_B_TX */
+			MX8MP_IOMUXC_NAND_DATA03__UART4_DCE_RTS		0x140 /* UART_B_CTS */
+			MX8MP_IOMUXC_NAND_DATA02__UART4_DCE_CTS		0x140 /* UART_B_RTS */
+		>;
+	};
+
+	pinctrl_usb1_id: usb1idgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x1c4 /* USB_A_ID */
+		>;
+	};
+
+	pinctrl_usb1_oc: usb1ocgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC		0x1c0 /* USB_A_OC# */
+		>;
+	};
+
+	pinctrl_usb2_id: usb2idgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO11__USB2_OTG_ID		0x1c4 /* USB_B_ID */
+		>;
+	};
+
+	pinctrl_usb2_oc: usb2ocgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC		0x1c0 /* USB_B_OC# */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0
+			MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4		0x1d0
+			MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5		0x1d0
+			MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6		0x1d0
+			MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7		0x1d0
+			MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B	0x141
+			MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4
+			MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4		0x1d4
+			MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5		0x1d4
+			MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6		0x1d4
+			MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7		0x1d4
+			MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B	0x141
+			MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6
+			MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4		0x1d6
+			MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5		0x1d6
+			MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6		0x1d6
+			MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7		0x1d6
+			MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B	0x141
+			MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE		0x196
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190 /* SDIO_A_CLK */
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0 /* SDIO_A_CMD */
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0 /* SDIO_A_D0 */
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0 /* SDIO_A_D1 */
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0 /* SDIO_A_D2 */
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0 /* SDIO_A_D3 */
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x400001d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194 /* SDIO_A_CLK */
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4 /* SDIO_A_CMD */
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4 /* SDIO_A_D0 */
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4 /* SDIO_A_D1 */
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4 /* SDIO_A_D2 */
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4 /* SDIO_A_D3 */
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x400001d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196 /* SDIO_A_CLK */
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6 /* SDIO_A_CMD */
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6 /* SDIO_A_D0 */
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6 /* SDIO_A_D1 */
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6 /* SDIO_A_D2 */
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6 /* SDIO_A_D3 */
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x400001d0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x19 /* SDIO_A_CD# */
+		>;
+	};
+
+	pinctrl_usdhc2_wp: usdhc2wpgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_WP__USDHC2_WP			0x400000d6 /* SDIO_A_WP */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190 /* SDIO_B_CLK */
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0 /* SDIO_B_CMD */
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0 /* SDIO_B_D0 */
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0 /* SDIO_B_D1 */
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0 /* SDIO_B_D2 */
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0 /* SDIO_B_D3 */
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0 /* SDIO_B_D4 */
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0 /* SDIO_B_D5 */
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0 /* SDIO_B_D6 */
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0 /* SDIO_B_D7 */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194 /* SDIO_B_CLK */
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4 /* SDIO_B_CMD */
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4 /* SDIO_B_D0 */
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4 /* SDIO_B_D1 */
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4 /* SDIO_B_D2 */
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4 /* SDIO_B_D3 */
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4 /* SDIO_B_D4 */
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4 /* SDIO_B_D5 */
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4 /* SDIO_B_D6 */
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4 /* SDIO_B_D7 */
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196 /* SDIO_B_CLK */
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6 /* SDIO_B_CMD */
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6 /* SDIO_B_D0 */
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6 /* SDIO_B_D1 */
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6 /* SDIO_B_D2 */
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6 /* SDIO_B_D3 */
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6 /* SDIO_B_D4 */
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6 /* SDIO_B_D5 */
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6 /* SDIO_B_D6 */
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6 /* SDIO_B_D7 */
+		>;
+	};
+
+	pinctrl_usdhc3_gpio: usdhc3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26		0x19 /* SDIO_B_CD# */
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14		0x19 /* SDIO_B_WP */
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts b/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts
new file mode 100644
index 000000000000..2173a36ff691
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-kontron-smarc.dtsi"
+
+/ {
+	model = "Kontron SMARC Eval Carrier with i.MX8MP";
+	compatible = "kontron,imx8mp-smarc-eval-carrier", "kontron,imx8mp-smarc",
+		     "kontron,imx8mp-osm-s", "fsl,imx8mp";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <100>;
+		enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usbc: usbc {
+		compatible = "linux,extcon-usb-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_id>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "imx8mp-wm8904";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Headphone Jack", "MICBIAS",
+			"IN1L", "Headphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Headphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+			sound-dai = <&wm8904>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+	};
+
+	regulator_can0: can0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "can0_en";
+		gpio = <&expander_pm_out 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	regulator_can1: can1-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "can1_en";
+		gpio = <&expander_pm_out 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&ecspi1 {
+	status = "okay";
+};
+
+&ecspi2 {
+	status = "okay";
+};
+
+&eqos {
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&flexcan1 {
+	xceiver-supply = <&regulator_can0>;
+	status = "okay";
+};
+
+&flexcan2 {
+	xceiver-supply = <&regulator_can1>;
+	status = "okay";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	expander_pm_out: io-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "EN_5V0_S0", "EN_3V3_S0", "EN_1V8_S0",
+				  "EN_1V5_S0", "EN_12V0_PCIE", "EN_3V3_S5",
+				  "CAN0_EN", "CAN1_EN";
+	};
+
+	expander_pm_in: io-expander@24 {
+		compatible = "nxp,pca9554";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "PG_5V0_3V3_S0", "PG_5V0_3V3_S5", "PG_1V8_S0",
+				  "PG_1V5_S0", "PG_BKLT_5V", "PG_BKLT_12V";
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	wm8904: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_vdd_1v8>;
+		CPVDD-supply = <&reg_vdd_1v8>;
+		DBVDD-supply = <&reg_vdd_1v8>;
+		DCVDD-supply = <&reg_vdd_1v8>;
+		MICVDD-supply = <&reg_vdd_3v3>;
+	};
+
+	expander_audio: io-expander@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "I2C_SEL_CODEC_LOOPBACK", "FPAH_PRESENCE",
+				  "CODEC_OPTION_SW_I2S_HDA", "LINE_IN_JD",
+				  "LINE_OUT_JD", "HEADPHONES_JD", "MIC_JD";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sai3 {
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	extcon = <&extcon_usbc>;
+	usb-role-switch;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	vmmc-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi
new file mode 100644
index 000000000000..1e831d9b8a93
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Kontron Electronics GmbH
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mp-kontron-osm-s.dtsi"
+
+/ {
+	model = "Kontron SMARC i.MX8MP";
+	compatible = "kontron,imx8mp-smarc", "kontron,imx8mp-osm-s", "fsl,imx8mp";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ecspi1 {
+	status = "okay";
+
+	tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+&eqos {	/* Second ethernet (OSM-S ETH_B) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos_rgmii>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-id4f51.e91b";
+			reg = <1>;
+			pinctrl-0 = <&pinctrl_ethphy1>;
+			pinctrl-names = "default";
+			reset-assert-us = <10000>;
+			reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fec { /* First ethernet (OSM-S ETH_A) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_rgmii>;
+	phy-connection-type = "rgmii-id";
+	phy-handle = <&ethphy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-id4f51.e91b";
+			reg = <1>;
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			pinctrl-names = "default";
+			reset-assert-us = <10000>;
+			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/*
+ * Rename SoM signals according to SMARC module usage:
+ *   GPIO_A_2 -> GPIO0
+ *   GPIO_A_3 -> GPIO1
+ *   GPIO_A_4 -> GPIO2
+ *   GPIO_A_5 -> GPIO3
+ *   USB_B_EN -> n.a.
+ *   USB_B_ID -> n.a.
+ *   USB_B_OC -> n.a.
+ */
+&gpio1 {
+	gpio-line-names = "GPIO_A_0", "GPIO_A_1", "", "",
+			  "", "GPIO0", "GPIO1", "GPIO2",
+			  "GPIO3", "", "USB_A_ID", "",
+			  "USB_A_EN", "USB_A_OC","CAM_MCK", "",
+			  "ETH_B_MDC", "ETH_B_MDIO", "ETH_B_TXD3", "ETH_B_TXD2",
+			  "ETH_B_TXD1", "ETH_B_TXD0", "ETH_B_TX_EN", "ETH_B_TX_CLK",
+			  "ETH_B_RX_DV", "ETH_B_RX_CLK", "ETH_B_RXD0", "ETH_B_RXD1",
+			  "ETH_B_RXD2", "ETH_B_RXD3";
+};
+
+/*
+ * Rename SoM signals according to SMARC module usage:
+ *   SDIO_A_CD -> SDIO_CD
+ *   SDIO_A_CLK -> SDIO_CK
+ *   SDIO_A_CMD -> SDIO_CMD
+ *   SDIO_A_D0 -> SDIO_D0
+ *   SDIO_A_D1 -> SDIO_D1
+ *   SDIO_A_D2 -> SDIO_D2
+ *   SDIO_A_D3 -> SDIO_D3
+ *   SDIO_A_PWR_EN -> SDIO_PWR_EN
+ *   SDIO_A_WP -> SDIO_WP
+ */
+&gpio2 {
+	gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "",
+			  "SDIO_CD", "SDIO_CK", "SDIO_CMD", "SDIO_D0",
+			  "SDIO_D1", "SDIO_D2", "SDIO_D3", "SDIO_PWR_EN",
+			  "SDIO_WP";
+};
+
+/*
+ * Rename SoM signals according to SMARC module usage:
+ *   PCIE_CLKREQ -> PCIE_A_CKREQ
+ *   PCIE_A_PERST -> PCIE_A_RST
+ *   SDIO_B_D5 -> n.a.
+ *   SDIO_B_D6 -> n.a.
+ *   SDIO_B_D7 -> n.a.
+ *   SPI_A_WP -> n.a.
+ *   SPI_A_HOLD -> n.a.
+ *   UART_B_RTS -> SER2_RTS
+ *   UART_B_CTS -> SER2_CTS
+ *   SDIO_B_D0 -> GPIO8
+ *   SDIO_B_D1 -> GPIO9
+ *   SDIO_B_D2 -> GPIO10
+ *   SDIO_B_D3 -> GPIO11
+ *   SDIO_B_WP -> n.a.
+ *   SDIO_B_D4 -> n.a.
+ *   PCIE_SM_ALERT -> SMB_ALERT
+ *   SDIO_B_CLK -> GPIO6
+ *   SDIO_B_CMD -> GPIO7
+ *   GPIO_B_0 -> LCD0_BKLT_EN
+ *   GPIO_B_1 -> LCD1_BKLT_EN
+ *   BOOT_SEL0 -> BOOT_SEL2
+ *   SDIO_B_CD -> n.a.
+ *   SDIO_B_PWR_EN -> n.a.
+ *   HDMI_CEC -> n.a.
+ *   SDIO_B_PWR_EN -> n.a.
+ */
+&gpio3 {
+	pinctrl-0 = <&pinctrl_gpio3>, <&pinctrl_gpio3_smarc>;
+	gpio-line-names = "PCIE_WAKE", "PCIE_A_CKREQ", "PCIE_A_RST", "",
+			  "", "", "", "",
+			  "SER2_RTS", "SER2_CTS", "GPIO8", "GPIO9",
+			  "GPIO10", "GPIO11", "", "",
+			  "SMB_ALERT", "GPIO6", "GPIO7", "LCD0_BKLT_EN",
+			  "LCD1_BKLT_EN", "", "BOOT_SEL2", "BOOT_SEL1",
+			  "", "", "", "",
+			  "", "HDMI_HPD";
+};
+
+/*
+ * Rename SoM signals according to SMARC module usage:
+ *   GPIO_B_5 -> n.a.
+ *   GPIO_B_6 -> n.a.
+ *   GPIO_B_7 -> n.a.
+ *   GPIO_C_0 -> LED
+ *   GPIO_B_3 -> ETH2_INT
+ *   GPIO_B_4 -> USB_HUB_RST
+ *   GPIO_B_2 -> ETH1_INT
+ *   GPIO_A_6 -> GPIO4
+ *   CAN_A_TX -> CAN0_TX
+ *   UART_A_CTS -> SER0_CTS
+ *   UART_A_RTS -> SER0_RTS
+ *   CAN_A_RX -> CAN0_RX
+ *   CAN_B_TX -> CAN1_TX
+ *   CAN_B_RX -> CAN1_RX
+ *   GPIO_A_7 -> TEST
+ *   I2S_A_DATA_IN -> I2S0_SDIN
+ *   I2S_LRCLK -> I2S0_LRCK
+ */
+&gpio4 {
+	gpio-line-names = "", "", "", "LED",
+			  "ETH_A_MDC", "ETH_A_MDIO", "ETH_A_RXD0", "ETH_A_RXD1",
+			  "ETH_A_RXD2", "ETH_A_RXD3", "ETH_A_RX_DV", "ETH_A_RX_CLK",
+			  "ETH_A_TXD0", "ETH_A_TXD1", "ETH_A_TXD2", "ETH_A_TXD3",
+			  "ETH_A_TX_EN", "ETH_A_TX_CLK", "ETH2_INT", "USB_HUB_RST",
+			  "ETH1_INT", "GPIO4", "CAN0_TX", "SER0_CTS",
+			  "SER0_RTS", "CAN0_RX", "CAN1_TX", "CAN1_RX",
+			  "TEST", "CARRIER_PWR_EN", "I2S0_SDIN", "I2S0_LRCK";
+};
+
+/*
+ * Rename SoM signals according to SMARC module usage:
+ *   I2S_BITCLK -> I2S0_CK
+ *   I2S_A_DATA_OUT -> I2S0_SDOUT
+ *   I2S_MCLK -> AUDIO_MCK
+ *   PWM_2 -> GPIO5
+ *   PWM_1 -> LCD1_BKLT_PWM
+ *   PWM_0 -> LCD0_BKLT_PWM
+ *   SPI_A_SCK -> SPI0_CK
+ *   SPI_A_SDO -> SPI0_DO
+ *   SPI_A_SDI -> SPI0_DIN
+ *   SPI_A_CS0 -> SPI0_CS0
+ *   SPI_B_SCK -> ESPI_CK
+ *   SPI_B_SDO -> ESPI_IO_0
+ *   SPI_B_SDI -> ESPI_IO_1
+ *   SPI_B_CS0 -> ESPI_CS0
+ *   I2C_A_SCL -> I2C_PM_CK
+ *   I2C_A_SDA -> I2C_PM_DAT
+ *   I2C_B_SCL -> I2C_GP_CK
+ *   I2C_B_SDA -> I2C_GP_DAT
+ *   PCIE_SMCLK -> HDMI_CTRL_CK
+ *   PCIE_SMDAT -> HDMI_CTRL_DAT
+ *   I2C_CAM_SCL -> I2C_CAM1_CK
+ *   I2C_CAM_SDA -> I2C_CAM1_DAT
+ *   UART_A_RX -> SER0_RX
+ *   UART_A_TX -> SER0_TX
+ *   UART_C_RX -> SER3_RX
+ *   UART_C_TX -> SER3_TX
+ *   UART_CON_RX -> SER1_RX
+ *   UART_CON_TX -> SER1_TX
+ *   UART_B_RX -> SER2_RX
+ *   UART_B_TX -> SER2_TX
+ */
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio5_smarc>;
+	gpio-line-names = "I2S0_CK", "I2S0_SDOUT", "AUDIO_MCK", "GPIO5",
+			  "LCD1_BKLT_PWM", "LCD0_BKLT_PWM", "SPI0_CK", "SPI0_DO",
+			  "SPI0_DIN", "SPI0_CS0", "ESPI_CK", "ESPI_IO_0",
+			  "ESPI_IO_1", "ESPI_CS0", "I2C_PM_CK", "I2C_PM_DAT",
+			  "I2C_GP_CK", "I2C_GP_DAT", "HDMI_CTRL_CK", "HDMI_CTRL_DAT",
+			  "I2C_CAM1_CK", "I2C_CAM1_DAT", "SER0_RX", "SER0_TX",
+			  "SER3_RX", "SER3_TX", "SER1_RX", "SER1_TX",
+			  "SER2_RX", "SER2_TX";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usb-hub@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+};
+
+&iomuxc {
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x46
+		>;
+	};
+
+	pinctrl_ethphy1: ethphy1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x46
+		>;
+	};
+
+	pinctrl_gpio3_smarc: gpio3smarcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DATA04__GPIO3_IO10		0x1d0 /* SMARC GPIO8 */
+			MX8MP_IOMUXC_NAND_DATA05__GPIO3_IO11		0x1d0 /* SMARC GPIO9 */
+			MX8MP_IOMUXC_NAND_DATA06__GPIO3_IO12		0x1d0 /* SMARC GPIO10 */
+			MX8MP_IOMUXC_NAND_DATA07__GPIO3_IO13		0x1d0 /* SMARC GPIO11 */
+			MX8MP_IOMUXC_NAND_WE_B__GPIO3_IO17		0x190 /* SMARC GPIO6 */
+			MX8MP_IOMUXC_NAND_WP_B__GPIO3_IO18		0x1d0 /* SMARC GPIO7 */
+		>;
+	};
+
+	pinctrl_gpio5_smarc: gpio5smarcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04		0x1d0 /* SMARC GPIO5 */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc-lvds-etml1010g3dra.dtso b/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc-lvds-etml1010g3dra.dtso
new file mode 100644
index 000000000000..1dcf249ca90d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc-lvds-etml1010g3dra.dtso
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx8mp-clock.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_lvds0 {
+	brightness-levels = <0 8 16 32 64 128 255>;
+	default-brightness-level = <8>;
+	enable-gpios = <&gpio5 23 GPIO_ACTIVE_LOW>;
+	num-interpolated-steps = <2>;
+	pwms = <&pwm1 0 66667 0>;
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/*
+	 * The LVDS panel uses 72.4 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to
+	 * 72.4 * 7 = 506.8 MHz so the LDB serializer and LCDIFv3 scanout
+	 * engine can reach accurate pixel clock of exactly 72.4 MHz.
+	 */
+	assigned-clock-rates = <0>, <506800000>;
+	status = "okay";
+};
+
+&panel0_lvds {
+	compatible = "edt,etml1010g3dra";
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts b/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts
new file mode 100644
index 000000000000..6f3a7b863dca
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp-phycore-fpsc.dtsi"
+
+/ {
+	compatible = "phytec,imx8mp-libra-rdk-fpsc",
+		     "phytec,imx8mp-phycore-fpsc", "fsl,imx8mp";
+	model = "PHYTEC i.MX8MP Libra RDK FPSC";
+
+	backlight_lvds0: backlight0 {
+		compatible = "pwm-backlight";
+		pinctrl-0 = <&pinctrl_lvds0>;
+		pinctrl-names = "default";
+		power-supply = <&reg_vdd_12v0>;
+		status = "disabled";
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	panel0_lvds: panel-lvds {
+		/* compatible panel in overlay */
+		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_vdd_3v3>;
+		status = "disabled";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "can1-stby";
+		gpio = <&gpio_expander 10 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "can2-stby";
+		gpio = <&gpio_expander 9 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_vdd_12v0: regulator-vdd-12v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "VDD_12V0";
+	};
+
+	reg_vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VDD_1V8";
+	};
+
+	reg_vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_3V3";
+	};
+
+	reg_vdd_5v0: regulator-vdd-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "VDD_5V0";
+	};
+};
+
+&eqos {
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			enet-phy-lane-no-swap;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		};
+	};
+};
+
+/* CAN FD */
+&flexcan1 {
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
+&flexspi {
+	status = "okay";
+
+	spi_nor: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		vcc-supply = <&reg_vdd_1v8>;
+	};
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "", "I2C5_SDA",
+			  "GPIO1", "", "", "", "SPI1_CS",
+			  "", "", "", "SPI2_CS", "I2C1_SCL",
+			  "I2C1_SDA", "I2C2_SCL", "I2C2_SDA", "I2C3_SCL", "I2C3_SDA",
+			  "", "GPIO2", "", "LVDS1_BL_EN", "SPI3_CS",
+			  "", "GPIO3";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vdd_1v8>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	leds@62 {
+		compatible = "nxp,pca9533";
+		reg = <0x62>;
+
+		led-1 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-2 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-3 {
+			type = <PCA9532_TYPE_LED>;
+		};
+	};
+};
+
+&i2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	gpio_expander: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "CSI1_CTRL1", "CSI1_CTRL2", "CSI1_CTRL3",
+				  "CSI1_CTRL4", "CSI2_CTRL1", "CSI2_CTRL2",
+				  "CSI2_CTRL3", "CSI2_CTRL4", "CLK_EN_AV",
+				  "nCAN2_EN", "nCAN1_EN", "PCIE1_nWAKE",
+				  "PCIE2_nWAKE", "PCIE2_nALERT_3V3",
+				  "UART1_BT_RS_SEL", "UART1_RS232_485_SEL";
+		vcc-supply = <&reg_vdd_1v8>;
+
+		uart1_bt_rs_sel: bt-rs-hog {
+			gpios = <14 GPIO_ACTIVE_HIGH>;
+			gpio-hog;
+			line-name = "UART1_BT_RS_SEL";
+			output-low;	/* default RS232/RS485 */
+		};
+
+		uart1_rs232_485_sel: rs232-485-hog {
+			gpios = <15 GPIO_ACTIVE_HIGH>;
+			gpio-hog;
+			line-name = "UART1_RS232_485_SEL";
+			output-high;	/* default RS232 */
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_lvds0: lvds0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23	0x12
+		>;
+	};
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25	0x1C0
+		>;
+	};
+};
+
+&lvds_bridge {
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel0_in>;
+			};
+		};
+	};
+};
+
+/* Mini PCIe */
+&pcie {
+	reset-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	status = "okay";
+};
+
+&reg_vdd_io {
+	regulator-max-microvolt = <1800000>;
+	regulator-min-microvolt = <1800000>;
+};
+
+&rv3028 {
+	interrupt-parent = <&gpio5>;
+	interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	aux-voltage-chargeable = <1>;
+	pinctrl-0 = <&pinctrl_rtc>;
+	pinctrl-names = "default";
+	trickle-resistor-ohms = <3000>;
+	wakeup-source;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* debug console */
+&uart4 {
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi
new file mode 100644
index 000000000000..2f5cc013e8d6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Avnet Embedded GmbH
+ */
+/dts-v1/;
+
+#include "imx8mp-msc-sm2s.dtsi"
+
+/ {
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>; /* bank0, 2GiB */
+	};
+};
+
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <105000>;
+};
+
+&soc_alert0 {
+	temperature = <95000>;
+};
+
+&soc_crit0 {
+	temperature = <105000>;
+};
+
+&tca6424 {
+	gbe0-int-hog {
+		gpio-hog;
+		input;
+		gpios = <3 GPIO_ACTIVE_LOW>;
+	};
+
+	gbe1-int-hog {
+		gpio-hog;
+		input;
+		gpios = <4 GPIO_ACTIVE_LOW>;
+	};
+
+	cam2-rst-hog {
+		gpio-hog;
+		output-high;
+		gpios = <9 GPIO_ACTIVE_LOW>;
+	};
+
+	cam2-pwr-hog {
+		gpio-hog;
+		output-high;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+	};
+
+	tpm-int-hog {
+		gpio-hog;
+		input;
+		gpios = <13 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi-int-hog {
+		gpio-hog;
+		input;
+		gpios = <14 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
new file mode 100644
index 000000000000..83194ea7cb81
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Avnet Embedded GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mp-msc-sm2s-14N0600E.dtsi"
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MSC SM2-MB-EP1 Carrier Board with SM2S-IMX8PLUS-QC6-14N0600E SoM";
+	compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
+		     "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
+		     "fsl,imx8mp";
+
+	reg_vcc_3v3_audio: 3v3-audio-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_AUD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc_1v8_audio: 1v8-audio-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8_AUD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sgtl5000-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,bitclock-master = <&codec_dai>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&i2c1 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+
+		assigned-clocks = <&clk IMX8MP_CLK_CLKOUT1_SEL>;
+		assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		clocks = <&clk IMX8MP_CLK_CLKOUT1>;
+		#sound-dai-cells = <0>;
+
+		VDDA-supply = <&reg_vcc_3v3_audio>;
+		VDDD-supply = <&reg_vcc_1v8_audio>;
+		VDDIO-supply = <&reg_vcc_1v8_audio>;
+	};
+};
+
+/* I2S-0 = sai2 */
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+
+	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&flexcan2 {
+	status = "okay";
+};
+
+&usdhc2 {
+	no-1-8-v;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_smarc_gpio>;
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x1c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x1c2
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x10
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x10
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC   0xd6
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK    0xd6
+			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6
+		>;
+	};
+
+	pinctrl_smarc_gpio: smarcgpiosgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11	0x19>, /* GPIO0 */
+			<MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x19>, /* GPIO1 */
+			<MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x19>, /* GPIO2 */
+			<MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x19>, /* GPIO3 */
+			<MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x19>, /* GPIO4 */
+			<MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02	0x19>, /* GPIO5 */
+			<MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x19>, /* GPIO6 */
+			<MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x19>, /* GPIO7 */
+			<MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20	0x19>, /* GPIO8 */
+			<MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x19>, /* GPIO9 */
+			<MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22	0x19>, /* GPIO10 */
+			<MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x19>, /* GPIO11 */
+			<MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x19>, /* GPIO12 */
+			<MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x19>; /* GPIO13 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
new file mode 100644
index 000000000000..0fd5c3abcdb7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
@@ -0,0 +1,838 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Avnet Embedded GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	aliases {
+		rtc0 = &sys_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	reg_usb0_host_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_host_vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_vbus>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb1_host_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_host_vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_vbus>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+
+	reg_flexcan1_xceiver: regulator-flexcan1 {
+		compatible = "regulator-fixed";
+		regulator-name = "flexcan1-xceiver";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_flexcan2_xceiver: regulator-flexcan2 {
+		compatible = "regulator-fixed";
+		regulator-name = "flexcan2-xceiver";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	lcd0_backlight: backlight-0 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_backlight>;
+		pwms = <&pwm1 0 100000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <255>;
+		enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	lcd1_backlight: backlight-1 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd1_backlight>;
+		pwms = <&pwm2 0 100000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <255>;
+		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+		status = "okay";
+
+		led-sw {
+			label = "sw-led";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	extcon_usb0: extcon-usb0 {
+		compatible = "linux,extcon-usb-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_extcon>;
+		id-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&vcc_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&vcc_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&vcc_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&vcc_arm>;
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <0>, <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <0>, <&gpio2 9 GPIO_ACTIVE_LOW>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-gpios = <&tca6424 16 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-gpios = <&tca6424 17 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	id_eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+&i2c6 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	scl-gpios = <&gpio3 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tca6424: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tca6424>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BOOT_SEL0#", "BOOT_SEL1#", "BOOT_SEL2#",
+			"gbe0_int", "gbe1_int", "pmic_int", "rtc_int", "lvds_int",
+			"PCIE_WAKE#", "cam2_rst", "cam2_pwr", "SLEEP#",
+			"wifi_pd", "tpm_int", "wifi_int", "PCIE_A_RST#",
+			"gbe0_rst", "gbe1_rst", "LID#", "BATLOW#", "CHARGING#",
+			"CHARGER_PRSNT#";
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	dsi_lvds_bridge: bridge@2d {
+		compatible = "ti,sn65dsi83";
+		reg = <0x2d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_bridge>;
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	pmic: pmic@30 {
+		compatible = "ricoh,rn5t567";
+		reg = <0x30>;
+		interrupt-parent = <&tca6424>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			DCDC1 {
+				regulator-name = "VCC_SOC";
+				regulator-always-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+			};
+
+			DCDC2 {
+				regulator-name = "VCC_DRAM";
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			vcc_arm: DCDC3 {
+				regulator-name = "VCC_ARM";
+				regulator-always-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+			};
+
+			DCDC4 {
+				regulator-name = "VCC_1V8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDO1 {
+				regulator-name = "VCC_LDO1_2V5";
+				regulator-always-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			LDO2 {
+				regulator-name = "VCC_LDO2_1V8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDO3 {
+				regulator-name = "VCC_ETH_2V5";
+				regulator-always-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			LDO4 {
+				regulator-name = "VCC_DDR4_2V5";
+				regulator-always-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			LDO5 {
+				regulator-name = "VCC_LDO5_1V8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDORTC1 {
+				regulator-name = "VCC_SNVS_1V8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDORTC2 {
+				regulator-name = "VCC_SNVS_3V3";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	sys_rtc: rtc@32 {
+		compatible = "ricoh,r2221tl";
+		reg = <0x32>;
+		interrupt-parent = <&tca6424>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	tmp_sensor: temperature-sensor@71 {
+		compatible = "ti,tmp103";
+		reg = <0x71>;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_flexcan1_xceiver>;
+	status = "disabled";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_flexcan2_xceiver>;
+	status = "disabled";
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	qspi_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "disabled";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "disabled";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb0_host_vbus>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb1_host_vbus>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	extcon = <&extcon_usb0>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x82>,
+			<MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x82>,
+			<MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x82>,
+			<MX8MP_IOMUXC_ECSPI1_SS0__ECSPI1_SS0		0x40000>,
+			<MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x40000>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82>,
+			<MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82>,
+			<MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82>,
+			<MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0		0x40000>,
+			<MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x40000>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3>,
+			<MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3>,
+			<MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91>,
+			<MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91>,
+			<MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91>,
+			<MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91>,
+			<MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91>,
+			<MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91>,
+			<MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f>,
+			<MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f>,
+			<MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f>,
+			<MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f>,
+			<MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f>,
+			<MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3>,
+			<MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3>,
+			<MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x91>,
+			<MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x91>,
+			<MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x91>,
+			<MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x91>,
+			<MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91>,
+			<MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91>,
+			<MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x1f>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX		0x154>,
+			<MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX		0x154>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX		0x154>,
+			<MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x154>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK		0x1c2>,
+			<MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B	0x82>,
+			<MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00	0x82>,
+			<MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01	0x82>,
+			<MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02	0x82>,
+			<MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82>,
+			<MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14		0x19>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001e0>,
+			<MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001e0>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x1e0>,
+			<MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x1e0>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001e0>,
+			<MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001e0>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001e0>,
+			<MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001e0>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001e0>,
+			<MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001e0>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL		0x400001e0>,
+			<MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001e0>;
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL		0x400001e0>,
+			<MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA		0x400001e0>;
+	};
+
+	pinctrl_i2c6_gpio: i2c6gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x1e0>,
+			<MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x1e0>;
+	};
+
+	pinctrl_lcd0_backlight: lcd0-backlightgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x41>;
+	};
+
+	pinctrl_lcd1_backlight: lcd1-backlightgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x41>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x19>;
+	};
+
+	pinctrl_lvds_bridge: lvds-bridgegrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x41>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT		0x116>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT		0x116>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT		0x116>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT		0x116>;
+	};
+
+	pinctrl_tca6424: tca6424grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x41>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX		0x49>,
+			<MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX		0x49>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x1c4>,
+			<MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x1c4>,
+			<MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x49>,
+			<MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x49>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x1c4>,
+			<MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x1c4>,
+			<MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x49>,
+			<MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x49>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x49>,
+			<MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x49>;
+	};
+
+	pinctrl_usb0_extcon: usb0-extcongrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x19>;
+	};
+
+	pinctrl_usb0_vbus: usb0-vbusgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x19>;
+	};
+
+	pinctrl_usb1_vbus: usb1-vbusgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x19>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4>,
+			<MX8MP_IOMUXC_SD2_WP__GPIO2_IO20		0x1c4>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190>,
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0>,
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0>,
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0>,
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0>,
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0>,
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc2_vmmc: usdhc2-vmmcgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x41>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>,
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4>,
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196>,
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6>,
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190>,
+			<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0>,
+			<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
+			<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4>,
+			<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196>,
+			<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6>,
+			<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6>,
+			<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6>,
+			<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6>,
+			<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6>,
+			<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6>,
+			<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6>,
+			<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6>,
+			<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6>,
+			<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0xc6>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-navqp.dts b/arch/arm64/boot/dts/freescale/imx8mp-navqp.dts
new file mode 100644
index 000000000000..4a4f7c1adc23
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-navqp.dts
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Emcraft Systems
+ * Copyright 2024 Gilles Talis <gilles.talis@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Emcraft Systems i.MX8MPlus NavQ+ Kit";
+	compatible = "emcraft,imx8mp-navqp", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "J15";
+		type = "d";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <10000>;
+			qca,disable-smarteee;
+			qca,disable-hibernation-mode;
+		};
+	};
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+	};
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* SD Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22				0x110
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16				0x19
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL			0x1c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA			0x1c2
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD				0x10
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC				0x10
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL					0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL					0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL					0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL					0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03				0x41
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19				0x41
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX				0x49
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX				0x49
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT				0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT				0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT				0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12				0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B				0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-enc-carrier-board.dts b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-enc-carrier-board.dts
new file mode 100644
index 000000000000..1df9488aaeb2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-enc-carrier-board.dts
@@ -0,0 +1,452 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Boundary Devices
+ * Copyright 2025 Collabora Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx8mp-nitrogen-som.dtsi"
+
+/ {
+	model = "Boundary Devices Nitrogen8M Plus ENC Carrier Board";
+	compatible = "boundary,imx8mp-nitrogen-enc-carrier-board",
+			"boundary,imx8mp-nitrogen-som", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		data-role = "dual";
+		label = "USB-C";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	reg_usb_vbus: regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_vbus>;
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio1 {
+	usb-hub-reset-hog {
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_LOW>;
+		line-name = "usb-hub-reset";
+		output-low;
+	};
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-0 = <&pinctrl_hdmi>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c2 {
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pinctrl_i2c2_pca9546>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+
+			rtc@52 {
+				compatible = "microcrystal,rv3028";
+				reg = <0x52>;
+				interrupts-extended = <&gpio1 4 IRQ_TYPE_LEVEL_LOW>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_rv3028>;
+				wakeup-source;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	usb-mux@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+		interrupts-extended = <&gpio1 8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_hd3ss3220>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+};
+
+&isp_0 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	assigned-clocks = <&clk IMX8MP_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_0 {
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb3_0>;
+	usb-role-switch;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x143
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x40000019
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000019
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x100
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07		0x119
+			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20		0x16
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x1c4
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x41
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x41
+			MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x41
+			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x41
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x41
+			MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04		0x41
+			MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03		0x41
+		>;
+	};
+
+	pinctrl_i2c2_pca9546: i2c2-pca9546grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x100
+		>;
+	};
+
+	pinctrl_i2c4_hd3ss3220: i2c4-hd3ss3220grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x16
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x03
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT		0x100
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT		0xd6
+			MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT		0xd6
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+		MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT			0x116
+		>;
+	};
+
+	pinctrl_reg_usb_vbus: reg-usb-vbusgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x100
+		>;
+	};
+
+	pinctrl_rv3028: rv3028grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04		0x1c0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x140
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usb3_0: usb3-0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC		0x1c0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__USDHC1_VSELECT		0x116
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x1c4
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-smarc-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-smarc-som.dtsi
new file mode 100644
index 000000000000..5da0f1b3ed8a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-smarc-som.dtsi
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Boundary Devices
+ * Copyright 2024 Silicon Signals Pvt. Ltd.
+ *
+ * Author : Bhavin Sharma <bhavin.sharma@siliconsignals.io>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Boundary Device Nitrogen8MP SMARC SoM";
+	compatible = "boundary,imx8mp-nitrogen-smarc-som", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+	        compatible = "regulator-fixed";
+	        regulator-name = "VSD_3V3";
+	        regulator-min-microvolt = <3300000>;
+	        regulator-max-microvolt = <3300000>;
+	        gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+	        enable-active-high;
+	};
+};
+
+&A53_0 {
+        cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+        cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+        cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+        cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c6 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	status = "okay";
+
+	mcp23018: gpio@20 {
+		compatible = "microchip,mcp23018";
+		gpio-controller;
+		#gpio-cells = <0x2>;
+		reg = <0x20>;
+		interrupts-extended = <&gpio4 22 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <0x2>;
+		microchip,irq-mirror;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mcp23018>;
+		reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* Console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* SD-card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+		        MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10                     	0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL					0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <
+		        MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL            			0x400001c3
+		        MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA                 		0x400001c3
+		>;
+	};
+
+	pinctrl_mcp23018: mcp23018grp {
+		fsl,pins = <
+		        MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22            			0x1c0
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27             			0x100
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14				0x1c0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX                            0x40
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX                            0x40
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK        			0x10
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD        			0x150
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0    			0x150
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1    			0x150
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2    			0x150
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3    			0x150
+			MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4    			0x150
+			MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5    			0x150
+			MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6    			0x150
+			MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7    			0x150
+			MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE  			0x10
+			MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B 			0x140
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK        			0x14
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD        			0x154
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0    			0x154
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1    			0x154
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2    			0x154
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3    			0x154
+			MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4    			0x154
+			MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5    			0x154
+			MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6    			0x154
+			MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7    			0x154
+			MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE  			0x14
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK        			0x12
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD        			0x152
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0    			0x152
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1    			0x152
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2    			0x152
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3    			0x152
+			MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4    			0x152
+			MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5    			0x152
+			MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6    			0x152
+			MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7    			0x152
+			MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE  			0x12
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                                0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                                0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0                            0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1                            0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2                            0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                            0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                                0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                                0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0                            0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1                            0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2                            0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                            0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                                0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                                0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0                            0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1                            0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2                            0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                            0x1d6
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B				0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-smarc-universal-board.dts b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-smarc-universal-board.dts
new file mode 100644
index 000000000000..46b243218dc8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-smarc-universal-board.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Boundary Devices
+ * Copyright 2024 Silicon Signals Pvt. Ltd.
+ *
+ * Author : Bhavin Sharma <bhavin.sharma@siliconsignals.io>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-nitrogen-smarc-som.dtsi"
+
+/ {
+	model = "Boundary Device Nitrogen8MP Universal SMARC Carrier Board";
+	compatible = "boundary,imx8mp-nitrogen-smarc-universal-board",
+			"boundary,imx8mp-nitrogen-smarc-som", "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-som.dtsi
new file mode 100644
index 000000000000..f658309612ef
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-som.dtsi
@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Boundary Devices
+ * Copyright 2025 Collabora Ltd.
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Boundary Devices Nitrogen8M Plus Som";
+	compatible = "boundary,imx8mp-nitrogen-som", "fsl,imx8mp";
+
+	rfkill-bt {
+		compatible = "rfkill-gpio";
+		label = "rfkill-bluetooth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rfkill_bt>;
+		radio-type = "bluetooth";
+		shutdown-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	};
+
+	rfkill-wlan {
+		compatible = "rfkill-gpio";
+		label = "rfkill-wlan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rfkill_wlan>;
+		radio-type = "wlan";
+		shutdown-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&eqos {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			eee-broken-1000t;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 GPIO_OPEN_DRAIN>;
+	sda-gpios = <&gpio5 15 GPIO_OPEN_DRAIN>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pinctrl_pmic>;
+
+		regulators {
+
+			buck1: BUCK1 {
+				regulator-name = "VDD_SOC (BUCK1)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2187500>;
+				regulator-min-microvolt = <600000>;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "VDD_ARM (BUCK2)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2187500>;
+				regulator-min-microvolt = <600000>;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "VDD_3P3V (BUCK4)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "VDD_1P8V (BUCK5)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "NVCC_DRAM_1P1V (BUCK6)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "NVCC_SNVS_1V8 (LDO1)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1600000>;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "VDDA_1V8 (LDO3)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <800000>;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "NVCC_SD1 (LDO5)";
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 GPIO_OPEN_DRAIN>;
+	sda-gpios = <&gpio5 17 GPIO_OPEN_DRAIN>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 GPIO_OPEN_DRAIN>;
+	sda-gpios = <&gpio5 19 GPIO_OPEN_DRAIN>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 GPIO_OPEN_DRAIN>;
+	sda-gpios = <&gpio5 21 GPIO_OPEN_DRAIN>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	status = "okay";
+};
+
+&usdhc3 {
+	bus-width = <8>;
+	non-removable;
+	no-mmc-hs400;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x20
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0xa0
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+
+			MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02				0x10
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16				0x100
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x1c3
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x1c3
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x1c3
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x1c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x1c3
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x1c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20	0x1c3
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x1c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00	0x41
+		>;
+	};
+
+	pinctrl_rfkill_bt: rfkill-btgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09	0x119
+		>;
+	};
+
+	pinctrl_rfkill_wlan: rfkill-wlangrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x16
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x10
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x150
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x150
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x150
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x150
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x150
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x150
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x150
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x150
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x150
+			MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x140
+
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x14
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x154
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x154
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x154
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x154
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x154
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x154
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x154
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x154
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x154
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x12
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x152
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x152
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x152
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x152
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x152
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x152
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x152
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x152
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x152
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi
new file mode 100644
index 000000000000..f269f7a004fc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Pengutronix, Ahmad Fatoum <kernel@pengutronix.de>
+ */
+
+&clk {
+	assigned-clocks = <&clk IMX8MP_CLK_A53_SRC>,
+			  <&clk IMX8MP_CLK_A53_CORE>,
+			  <&clk IMX8MP_SYS_PLL3>,
+			  <&clk IMX8MP_CLK_NOC>,
+			  <&clk IMX8MP_CLK_NOC_IO>,
+			  <&clk IMX8MP_CLK_GIC>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_ARM_PLL_OUT>,
+				 <0>,
+				 <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_SYS_PLL3_OUT>,
+				 <&clk IMX8MP_SYS_PLL1_800M>;
+	assigned-clock-rates = <0>, <0>,
+			       <600000000>,
+			       <800000000>,
+			       <600000000>,
+			       <400000000>;
+	fsl,operating-mode = "nominal";
+};
+
+&gpu2d {
+	assigned-clocks = <&clk IMX8MP_CLK_GPU2D_CORE>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+	assigned-clock-rates = <800000000>;
+};
+
+&gpu3d {
+	assigned-clocks = <&clk IMX8MP_CLK_GPU3D_CORE>,
+			  <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_SYS_PLL1_800M>;
+	assigned-clock-rates = <800000000>, <800000000>;
+};
+
+&pgc_hdmimix {
+	assigned-clocks = <&clk IMX8MP_CLK_HDMI_AXI>,
+			  <&clk IMX8MP_CLK_HDMI_APB>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_SYS_PLL1_133M>;
+	assigned-clock-rates = <400000000>, <133000000>;
+};
+
+&pgc_hsiomix {
+	assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+	assigned-clock-rates = <400000000>;
+};
+
+&pgc_gpumix {
+	assigned-clocks = <&clk IMX8MP_CLK_GPU_AXI>,
+			  <&clk IMX8MP_CLK_GPU_AHB>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL3_OUT>,
+				 <&clk IMX8MP_SYS_PLL3_OUT>;
+	assigned-clock-rates = <600000000>, <300000000>;
+};
+
+&pgc_mlmix {
+	assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>,
+			  <&clk IMX8MP_CLK_ML_AXI>,
+			  <&clk IMX8MP_CLK_ML_AHB>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_SYS_PLL1_800M>;
+	assigned-clock-rates = <800000000>,
+			       <800000000>,
+			       <300000000>;
+};
+
+&media_blk_ctrl {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>,
+			  <&clk IMX8MP_CLK_MEDIA_APB>,
+			  <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>,
+			  <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
+			  <&clk IMX8MP_CLK_MEDIA_ISP>,
+			  <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_VIDEO_PLL1_OUT>,
+				 <&clk IMX8MP_VIDEO_PLL1_OUT>,
+				 <&clk IMX8MP_SYS_PLL1_800M>;
+	assigned-clock-rates = <400000000>, <200000000>,
+			       <0>, <0>, <400000000>,
+			       <1039500000>;
+};
+
+&vpu_g1 {
+	assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>;
+	assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
+	assigned-clock-rates = <600000000>;
+};
+
+&vpu_g2 {
+	assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+	assigned-clock-rates = <500000000>;
+};
+
+&vpumix_blk_ctrl {
+	assigned-clocks = <&clk IMX8MP_VPU_PLL>, <&clk IMX8MP_CLK_VPU_BUS>;
+	assigned-clock-parents = <0>, <&clk IMX8MP_VPU_PLL_OUT>;
+	assigned-clock-rates = <600000000>, <600000000>;
+};
+
+/delete-node/ &{noc_opp_table/opp-1000000000};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
index 6aa720bafe28..436152308642 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -6,8 +6,10 @@
 
 /dts-v1/;
 
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include <dt-bindings/leds/leds-pca9532.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/thermal/thermal.h>
 #include "imx8mp-phycore-som.dtsi"
 
 / {
@@ -19,6 +21,88 @@
 		stdout-path = &uart1;
 	};
 
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds1>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <11>;
+		enable-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+		num-interpolated-steps = <2>;
+		power-supply = <&reg_lvds1_reg_en>;
+		pwms = <&pwm3 0 50000 0>;
+	};
+
+	fan0: fan {
+		compatible = "gpio-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan>;
+		gpio-fan,speed-map = <0     0
+				      13000 1>;
+		gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+		#cooling-cells = <2>;
+	};
+
+	panel1_lvds: panel-lvds {
+		compatible = "edt,etml1010g3dra";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_vcc_3v3_sw>;
+
+		port {
+			panel1_in: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+	};
+
+	reg_vcc_5v_sw: regulator-vcc-5v-sw {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "VCC_5V_SW";
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_reg>;
+		gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can1-stby";
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan2_reg>;
+		gpio = <&gpio3 21 GPIO_ACTIVE_LOW>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can2-stby";
+	};
+
+	reg_lvds1_reg_en: regulator-lvds1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1200000>;
+		regulator-min-microvolt = <1200000>;
+		regulator-name = "lvds1_reg_en";
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_vbus>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb1_host_vbus";
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -31,6 +115,48 @@
 		startup-delay-us = <100>;
 		off-on-delay-us = <12000>;
 	};
+
+	reg_vcc_3v3_sw: regulator-vcc-3v3-sw {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	thermal-zones {
+		soc-thermal {
+			trips {
+				active1: trip2 {
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&active1>;
+					cooling-device = <&fan0 1 THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+/* TPM */
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	tpm: tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <38000000>;
+	};
 };
 
 &eqos {
@@ -57,6 +183,21 @@
 	};
 };
 
+/* CAN FD */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
 &i2c2 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default", "gpio";
@@ -70,30 +211,92 @@
 		compatible = "atmel,24c02";
 		reg = <0x51>;
 		pagesize = <16>;
+		vcc-supply = <&reg_vcc_3v3_sw>;
 	};
 
 	leds@62 {
 		compatible = "nxp,pca9533";
 		reg = <0x62>;
 
-		led1 {
+		led-1 {
 			type = <PCA9532_TYPE_LED>;
 		};
 
-		led2 {
+		led-2 {
 			type = <PCA9532_TYPE_LED>;
 		};
 
-		led3 {
+		led-3 {
 			type = <PCA9532_TYPE_LED>;
 		};
 	};
 };
 
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	status = "okay";
+
+	ports {
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&panel1_in>;
+			};
+		};
+	};
+};
+
+&media_blk_ctrl {
+	/*
+	 * The LVDS panel on this device uses 72.4 MHz pixel clock,
+	 * set IMX8MP_VIDEO_PLL1 to 72.4 * 7 = 506.8 MHz so the LDB
+	 * serializer and LCDIFv3 scanout engine can reach accurate
+	 * pixel clock of exactly 72.4 MHz.
+	 */
+	assigned-clock-rates = <500000000>, <200000000>,
+			       <0>, <0>, <500000000>,
+			       <506800000>;
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
 
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,clkreq-unsupported;
+	status = "okay";
+};
+
+/* Mini PCIe */
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_vcc_3v3_sw>;
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&rv3028 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rtc>;
+	interrupt-parent = <&gpio4>;
+	interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+	aux-voltage-chargeable = <1>;
+	wakeup-source;
+	trickle-resistor-ohms = <3000>;
+};
+
 /* debug console */
 &uart1 {
 	pinctrl-names = "default";
@@ -101,19 +304,107 @@
 	status = "okay";
 };
 
+/* USB1 Host mode Type-A */
+&usb3_phy0 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* USB2 4-port USB3.0 HUB */
+&usb3_phy1 {
+	vbus-supply = <&reg_vcc_5v_sw>;
+	status = "okay";
+};
+
+&usb3_1 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* RS232/RS485 */
+&uart2 {
+	assigned-clocks = <&clk IMX8MP_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
 /* SD-Card */
 &usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_pins>;
 	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>;
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
 	bus-width = <4>;
 	status = "okay";
 };
 
+&gpio1 {
+	gpio-line-names = "", "", "X_PMIC_WDOG_B", "",
+		"PMIC_SD_VSEL", "", "", "", "PCIe_nPERST", "LVDS1REG_EN",
+		"PCIe_nWAKE", "PCIe_nCLKREQ", "USB1_OTG_PWR", "",
+		"PCIe_nW_DISABLE";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "",
+		"", "", "", "", "", "",
+		"", "", "X_SD2_CD_B", "", "", "",
+		"", "", "", "SD2_RESET_B", "LVDS1_BL_EN";
+};
+
+&gpio3 {
+	gpio-line-names = "", "", "", "",
+		"", "", "", "", "", "",
+		"", "", "", "", "", "",
+		"", "", "", "", "nCAN1_EN", "nCAN2_EN";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "",
+		"", "", "", "", "", "",
+		"", "", "", "", "", "",
+		"", "", "X_PMIC_IRQ_B", "nRTC_INT", "nENET0_INT_PWDN";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "",
+		"", "", "", "", "", "X_ECSPI1_SSO";
+};
+
 &iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO   0x80
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI   0x80
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK   0x80
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09     0x00
+		>;
+	};
+
 	pinctrl_eqos: eqosgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC			0x2
@@ -124,16 +415,48 @@
 			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3		0x90
 			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
 			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90
-			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x16
-			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x16
-			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x16
-			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x16
-			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x16
-			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x12
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x12
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x12
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x12
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x12
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x12
 			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20			0x10
 		>;
 	};
 
+	pinctrl_fan: fan0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04       0x16
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX		0x154
+			MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX		0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX		0x154
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x154
+		>;
+	};
+
+	pinctrl_flexcan1_reg: flexcan1reggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20	0x154
+		>;
+	};
+
+	pinctrl_flexcan2_reg: flexcan2reggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21	0x154
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
@@ -148,22 +471,64 @@
 		>;
 	};
 
+	pinctrl_lvds1: lvds1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20		0x12
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08     0x40
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10     0x60
+			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11	0x60 /* open drain, pull up */
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14     0x40
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT		0x12
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x1C0
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x40
-			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x40
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usb1_vbus: usb1vbusgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12     0x10
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+			MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS	0x140
+			MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS	0x140
 		>;
 	};
 
 	pinctrl_usdhc2_pins: usdhc2-gpiogrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x40
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi
new file mode 100644
index 000000000000..8b0e8cf86cad
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi
@@ -0,0 +1,796 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx8mp.dtsi"
+
+/ {
+	compatible = "phytec,imx8mp-phycore-fpsc", "fsl,imx8mp";
+	model = "PHYTEC phyCORE-i.MX8MP FPSC";
+
+	aliases {
+		rtc0 = &rv3028;
+		rtc1 = &snvs_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x80000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		 compatible = "regulator-fixed";
+		 off-on-delay-us = <12000>;
+		 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		 pinctrl-names = "default";
+		 regulator-max-microvolt = <3300000>;
+		 regulator-min-microvolt = <3300000>;
+		 regulator-name = "VDDSW_SD2";
+		 startup-delay-us = <100>;
+		 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		 enable-active-high;
+	 };
+
+	reg_vdd_io: regulator-vdd-io {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "VDD_IO";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ecspi1 { /* FPSC SPI1 */
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	pinctrl-names = "default";
+};
+
+&ecspi2 { /* FPSC SPI2 */
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	pinctrl-names = "default";
+};
+
+&ecspi3 { /* FPSC SPI3 */
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	pinctrl-names = "default";
+};
+
+&eqos { /* FPSC RGMII2 */
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-names = "default";
+};
+
+&fec { /* FPSC GB_ETH1 */
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-names = "default";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+			enet-phy-lane-no-swap;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,min-output-impedance;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		};
+	};
+};
+
+&flexcan1 { /* FPSC CAN1 */
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+};
+
+&flexcan2 { /* FPSC CAN2 */
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+};
+
+&flexspi { /* FPSC QSPI */
+	pinctrl-0 = <&pinctrl_flexspi>;
+	pinctrl-names = "default";
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "PCIE1_nPERST";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "SD2_RESET_B";
+};
+
+&gpio3 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "I2C6_SCL",
+			  "I2C6_SDA", "I2C5_SCL";
+};
+
+&gpio4 { /* FPSC GPIO */
+	gpio-line-names = "GPIO6", "RGMII2_nINT", "GPIO7", "GPIO4", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "X_PMIC_IRQ_B", "",
+			  "", "GPIO5", "", "", "RGMII2_EVENT_OUT",
+			  "", "", "RGMII2_EVENT_IN";
+	pinctrl-0 = <&pinctrl_gpio4>;
+	pinctrl-names = "default";
+};
+
+&gpio5 { /* FPSC GPIO */
+	gpio-line-names = "", "", "", "", "I2C5_SDA",
+			  "GPIO1", "", "", "", "SPI1_CS",
+			  "", "", "", "SPI2_CS", "I2C1_SCL",
+			  "I2C1_SDA", "I2C2_SCL", "I2C2_SDA", "I2C3_SCL", "I2C3_SDA",
+			  "", "GPIO2", "", "", "SPI3_CS",
+			  "", "GPIO3";
+	pinctrl-0 = <&pinctrl_gpio5>;
+	pinctrl-names = "default";
+};
+
+&i2c1 { /* FPSC I2C1 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <950000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "VDD_SOC (BUCK1)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "VDD_ARM (BUCK2)";
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "VDD_3V3 (BUCK4)";
+			};
+
+			buck5: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "VDD_1V8 (BUCK5)";
+			};
+
+			buck6: BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "NVCC_DRAM_1V1 (BUCK6)";
+			};
+
+			ldo1: LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "NVCC_SNVS_1V8 (LDO1)";
+			};
+
+			ldo3: LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "VDDA_1V8 (LDO3)";
+			};
+
+			ldo5: LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "NVCC_SD2 (LDO5)";
+			};
+		};
+	};
+
+	/* User EEPROM */
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vdd_io>;
+	};
+
+	/* factory EEPROM */
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+		read-only;
+		vcc-supply = <&reg_vdd_io>;
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+	};
+};
+
+&i2c2 { /* FPSC I2C2 */
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c3 { /* FPSC I2C3 */
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c5 { /* FPSC I2C4 */
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c6 { /* FPSC I2C5 */
+	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio3 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&iomuxc {
+	pinctrl_flexcan1: can1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__CAN1_TX		0x154	/* CAN1_TX */
+			MX8MP_IOMUXC_SAI2_TXC__CAN1_RX		0x154	/* CAN1_RX */
+		>;
+	};
+
+	pinctrl_flexcan2: can2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX		0x154	/* CAN2_TX */
+			MX8MP_IOMUXC_UART3_TXD__CAN2_RX		0x154	/* CAN2_RX */
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01				0x10	/* RGMII2_nINT */
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27				0x10	/* RGMII2_EVENT_IN */
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24				0x10	/* RGMII2_EVENT_OUT */
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x2	/* RGMII2_MDIO */
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x2	/* RGMII2_MDC */
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x12	/* RGMII2_TX_D3 */
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x12	/* RGMII2_TX_D2 */
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x12	/* RGMII2_TX_D1 */
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x12	/* RGMII2_TX_D0 */
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x12	/* RGMII2_TX_CTL */
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x12	/* RGMII2_TXC */
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90	/* RGMII2_RX_D3 */
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90	/* RGMII2_RX_D2 */
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90	/* RGMII2_RX_D1 */
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90	/* RGMII2_RX_D0 */
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x90	/* RGMII2_RX_CTL */
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90	/* RGMII2_RXC */
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x2
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x2
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x90
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x140
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x12
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x12
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x14
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x14
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x14
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x14
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
+		>;
+	};
+
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B	0x82	/* QSPI_CE */
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK		0x1c2	/* QSPI_CLK */
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00	0x82	/* QSPI_DATA_0 */
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01	0x82	/* QSPI_DATA_1 */
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02	0x82	/* QSPI_DATA_2 */
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82	/* QSPI_DATA_3 */
+			MX8MP_IOMUXC_NAND_DQS__FLEXSPI_A_DQS		0x82	/* QSPI_DQS */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x40	/* GPIO4 */
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x106	/* GPIO5 */
+			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x106	/* GPIO6 */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x106	/* GPIO7 */
+		>;
+	};
+
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05	0x106	/* GPIO1 */
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x106	/* GPIO2 */
+			MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26	0x106	/* GPIO3 */
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x106	/* HDMI_CEC */
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x106	/* HDMI_SCL */
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x106	/* HDMI_SDA */
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x106	/* HDMI_HPD */
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x1e2
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x1e2
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2	/* I2C1_SDA_DNU */
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2	/* I2C1_SCL_DNU */
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x1e2
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x1e2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2	/* I2C2_SDA */
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2	/* I2C2_SCL */
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x1e2
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x1e2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2	/* I2C3_SDA */
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2	/* I2C3_SCL */
+		>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04	0x1e2
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21	0x1e2
+		>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001c2	/* I2C4_SDA */
+			MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL	0x400001c2	/* I2C4_SCL */
+		>;
+	};
+
+	pinctrl_i2c6_gpio: i2c6gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20	0x1e2
+			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19	0x1e2
+		>;
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA		0x400001c2	/* I2C5_SDA */
+			MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL	0x400001c2	/* I2C5_SCL */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x10	/* PCIE1_nCLKREQ */
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08     0x40	/* PCIE1_nPERST */
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x140
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT	0x106	/* PWM1 */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT	0x106	/* PWM2 */
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT		0x106	/* PWM3 */
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT	0x106	/* PWM4 */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19    0x40
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK	0x106	/* SAI1_MCLK */
+			MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI5_RX_SYNC	0x106	/* SAI1_RX_SYNC */
+			MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI5_RX_BCLK	0x106	/* SAI1_RX_BCLK */
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI5_RX_DATA00	0x106	/* SAI1_RX_DATA */
+			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC	0x106	/* SAI1_TX_SYNC */
+			MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK	0x106	/* SAI1_TX_BCLK */
+			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI5_TX_DATA00	0x106	/* SAI1_TX_DATA */
+		>;
+	};
+
+	pinctrl_ecspi1: spi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK	0x82	/* SPI1_SCLK */
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI	0x82	/* SPI1_MOSI */
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO	0x82	/* SPI1_MISO */
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09	0x106	/* SPI1_CS */
+		>;
+	};
+
+	pinctrl_ecspi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x82	/* SPI2_SCLK */
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x82	/* SPI2_MOSI */
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x82	/* SPI2_MISO */
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x106     /* SPI2_CS */
+		>;
+	};
+
+	pinctrl_ecspi3: spi3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK	0x82	/* SPI3_SCLK */
+			MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI	0x82	/* SPI3_MOSI */
+			MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO	0x82	/* SPI3_MISO */
+			MX8MP_IOMUXC_UART2_RXD__GPIO5_IO24	0x106     /* SPI3_CS */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXC__UART2_DTE_RX	0x140	/* UART2_RXD */
+			MX8MP_IOMUXC_SAI3_TXFS__UART2_DTE_TX	0x140	/* UART2_TXD */
+			MX8MP_IOMUXC_SD1_DATA5__UART2_DTE_RTS	0x140	/* UART2_RTS */
+			MX8MP_IOMUXC_SD1_DATA4__UART2_DTE_CTS	0x140	/* UART2_CTS */
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA6__UART3_DTE_RX	0x140	/* UART1_RXD */
+			MX8MP_IOMUXC_SD1_DATA7__UART3_DTE_TX	0x140	/* UART1_TXD */
+			MX8MP_IOMUXC_SD1_STROBE__UART3_DTE_RTS	0x140	/* UART1_RTS */
+			MX8MP_IOMUXC_SD1_RESET_B__UART3_DTE_CTS	0x140	/* UART1_CTS */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140	/* UART3_RXD */
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140	/* UART3_TXD */
+		>;
+	};
+
+	pinctrl_usb0: usb0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR	0x106	/* USB1_PWR_EN */
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x106	/* USB1_OC */
+			MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID	0x106	/* USB1_ID */
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR	0x106	/* USB2_PWR_EN */
+			MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC	0x106	/* USB2_OC */
+			MX8MP_IOMUXC_GPIO1_IO11__USB2_OTG_ID	0x106	/* USB2_ID */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__USDHC1_WP	0x106	/* SDIO_WP */
+			MX8MP_IOMUXC_GPIO1_IO06__USDHC1_CD_B	0x106	/* SDIO_CD */
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x106	/* SDIO_CLK */
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x106	/* SDIO_CLK */
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x106	/* SDIO_DATA0 */
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x106	/* SDIO_DATA1 */
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x106	/* SDIO_DATA2 */
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x106	/* SDIO_DATA3 */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B	0x40	/* SDCARD_CD */
+			MX8MP_IOMUXC_SD2_WP__USDHC2_WP		0x40	/* SDCARD_WP */
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190	/* SDCARD_CLK */
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0	/* SDCARD_CMD */
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0	/* SDCARD_DATA0 */
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0	/* SDCARD_DATA1 */
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0	/* SDCARD_DATA2 */
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0	/* SDCARD_DATA3 */
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B	0x40	/* SDCARD_CD */
+			MX8MP_IOMUXC_SD2_WP__USDHC2_WP		0x40	/* SDCARD_WP */
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194	/* SDCARD_CLK */
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4	/* SDCARD_CMD */
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4	/* SDCARD_DATA0 */
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4	/* SDCARD_DATA1 */
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4	/* SDCARD_DATA2 */
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4	/* SDCARD_DATA3 */
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B	0x40	/* SDCARD_CD */
+			MX8MP_IOMUXC_SD2_WP__USDHC2_WP		0x40	/* SDCARD_WP */
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196	/* SDCARD_CLK */
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6	/* SDCARD_CMD */
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6	/* SDCARD_DATA0 */
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6	/* SDCARD_DATA1 */
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6	/* SDCARD_DATA2 */
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6	/* SDCARD_DATA3 */
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d2
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d2
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d2
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d2
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d2
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d2
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d2
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d2
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xe6
+		>;
+	};
+};
+
+&pcie { /* FPSC PCIE1 */
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+};
+
+&pwm1 { /* FPSC PWM1 */
+	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-names = "default";
+};
+
+&pwm2 { /* FPSC PWM2 */
+	pinctrl-0 = <&pinctrl_pwm2>;
+	pinctrl-names = "default";
+};
+
+&pwm3 { /* FPSC PWM3 */
+	pinctrl-0 = <&pinctrl_pwm3>;
+	pinctrl-names = "default";
+};
+
+&pwm4 { /* FPSC PWM4 */
+	pinctrl-0 = <&pinctrl_pwm4>;
+	pinctrl-names = "default";
+};
+
+&sai5 { /* FPSC SAI1 */
+	pinctrl-0 = <&pinctrl_sai5>;
+	pinctrl-names = "default";
+};
+
+&uart2 { /* FPSC UART2 */
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-names = "default";
+	fsl,dte-mode;
+};
+
+&uart3 { /* FPSC UART1 */
+	pinctrl-0 = <&pinctrl_uart3>;
+	pinctrl-names = "default";
+	fsl,dte-mode;
+};
+
+&uart4 { /* FPSC UART3 */
+	pinctrl-0 = <&pinctrl_uart4>;
+	pinctrl-names = "default";
+};
+
+&usb3_0 { /* FPSC USB1 */
+	pinctrl-0 = <&pinctrl_usb0>;
+	pinctrl-names = "default";
+};
+
+&usb3_1 { /* FPSC USB2 */
+	pinctrl-0 = <&pinctrl_usb1>;
+	pinctrl-names = "default";
+};
+
+&usdhc1 { /* FPSC SDIO */
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-names = "default";
+};
+
+&usdhc2 { /* FPSC SDCARD */
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	sd-uhs-sdr104;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-0 = <&pinctrl_wdog>;
+	pinctrl-names = "default";
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-no-eth.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phycore-no-eth.dtso
new file mode 100644
index 000000000000..5f0278bf61ee
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-no-eth.dtso
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024 PHYTEC Messtechnik GmbH
+ * Author: Cem Tenruh <c.tenruh@phytec.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&ethphy1 {
+	status = "disabled";
+};
+
+&fec {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
index 79b290a002c1..04f724c6ec21 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
@@ -20,6 +20,15 @@
 		device_type = "memory";
 		reg = <0x0 0x40000000 0 0x80000000>;
 	};
+
+	reg_vdd_io: regulator-vdd-io {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_IO";
+	};
 };
 
 &A53_0 {
@@ -42,8 +51,8 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
 	fsl,magic-packet;
 	status = "okay";
 
@@ -54,14 +63,12 @@
 		ethphy1: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
-			interrupt-parent = <&gpio1>;
-			interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
-			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			enet-phy-lane-no-swap;
 			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			ti,min-output-impedance;
-			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		};
 	};
 };
@@ -75,8 +82,8 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <80000000>;
-		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 	};
 };
 
@@ -85,99 +92,85 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	pmic: pmic@25 {
-		reg = <0x25>;
 		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 
 		regulators {
 			buck1: BUCK1 {
-				regulator-compatible = "BUCK1";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <2187500>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "VDD_SOC (BUCK1)";
 				regulator-ramp-delay = <3125>;
 			};
 
 			buck2: BUCK2 {
-				regulator-compatible = "BUCK2";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <2187500>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <3125>;
 				nxp,dvs-run-voltage = <950000>;
 				nxp,dvs-standby-voltage = <850000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1050000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "VDD_ARM (BUCK2)";
+				regulator-ramp-delay = <3125>;
 			};
 
 			buck4: BUCK4 {
-				regulator-compatible = "BUCK4";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <3400000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "VDD_3V3 (BUCK4)";
 			};
 
 			buck5: BUCK5 {
-				regulator-compatible = "BUCK5";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <3400000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "VDD_1V8 (BUCK5)";
 			};
 
 			buck6: BUCK6 {
-				regulator-compatible = "BUCK6";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <3400000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "NVCC_DRAM_1V1 (BUCK6)";
 			};
 
 			ldo1: LDO1 {
-				regulator-compatible = "LDO1";
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
 				regulator-always-on;
-			};
-
-			ldo2: LDO2 {
-				regulator-compatible = "LDO2";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1150000>;
 				regulator-boot-on;
-				regulator-always-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1710000>;
+				regulator-name = "NVCC_SNVS_1V8 (LDO1)";
 			};
 
 			ldo3: LDO3 {
-				regulator-compatible = "LDO3";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
 				regulator-always-on;
-			};
-
-			ldo4: LDO4 {
-				regulator-compatible = "LDO4";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "VDDA_1V8 (LDO3)";
 			};
 
 			ldo5: LDO5 {
-				regulator-compatible = "LDO5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "NVCC_SD2 (LDO5)";
 			};
 		};
 	};
@@ -186,12 +179,12 @@
 		compatible = "atmel,24c32";
 		reg = <0x51>;
 		pagesize = <32>;
+		vcc-supply = <&reg_vdd_io>;
 	};
 
 	rv3028: rtc@52 {
 		compatible = "microcrystal,rv3028";
 		reg = <0x52>;
-		trickle-resistor-ohms = <3000>;
 	};
 };
 
@@ -215,24 +208,34 @@
 	status = "okay";
 };
 
+&gpio1 {
+	gpio-line-names = "", "", "X_PMIC_WDOG_B";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "",
+		"", "", "", "", "", "",
+		"", "", "", "", "", "",
+		"", "", "X_PMIC_IRQ_B";
+};
+
 &iomuxc {
 	pinctrl_fec: fecgrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
-			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
-			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
-			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
-			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
-			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
-			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
-			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x2
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x2
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x90
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x90
 			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x12
 			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x12
 			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x14
 			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x14
 			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x14
 			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x14
-			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x11
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
 		>;
 	};
 
@@ -249,69 +252,69 @@
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3
-			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
 		>;
 	};
 
 	pinctrl_i2c1_gpio: i2c1gpiogrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x1e3
-			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x1e3
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x1e2
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x1e2
 		>;
 	};
 
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x141
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x140
 		>;
 	};
 
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
-			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
 			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
 			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
 			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
 			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
 			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
-			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
-			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
-			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
-			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
 		>;
 	};
 
 	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
-			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
 			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
 			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
 			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
 			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
 			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
-			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
-			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
-			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
-			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
 		>;
 	};
 
 	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
-			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d2
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d2
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d2
 			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d2
 			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d2
 			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d2
 			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d2
 			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d2
-			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d2
-			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d2
-			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d2
-			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
index 0fef066471ba..16f5899de415 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
@@ -6,6 +6,39 @@
 #ifndef __DTS_IMX8MP_PINFUNC_H
 #define __DTS_IMX8MP_PINFUNC_H
 
+/* Drive Strength */
+#define MX8MP_DSE_X1		0x0
+#define MX8MP_DSE_X2		0x4
+#define MX8MP_DSE_X4		0x2
+#define MX8MP_DSE_X6		0x6
+
+/* Slew Rate */
+#define MX8MP_FSEL_FAST		0x10
+#define MX8MP_FSEL_SLOW		0x0
+
+/* Open Drain */
+#define MX8MP_ODE_ENABLE	0x20
+#define MX8MP_ODE_DISABLE	0x0
+
+#define MX8MP_PULL_DOWN		0x0
+#define MX8MP_PULL_UP		0x40
+
+/* Hysteresis */
+#define MX8MP_HYS_CMOS		0x0
+#define MX8MP_HYS_SCHMITT	0x80
+
+#define MX8MP_PULL_ENABLE	0x100
+#define MX8MP_PULL_DISABLE	0x0
+
+/* SION force input mode */
+#define MX8MP_SION		0x40000000
+
+/* long defaults */
+#define MX8MP_USDHC_DATA_DEFAULT (MX8MP_FSEL_FAST | MX8MP_PULL_UP | \
+				  MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+#define MX8MP_I2C_DEFAULT (MX8MP_DSE_X6 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | \
+			   MX8MP_PULL_ENABLE | MX8MP_SION)
+
 /*
  * The pin function ID is a tuple of
  * <mux_reg conf_reg input_reg mux_mode input_val>
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-basic.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-basic.dts
new file mode 100644
index 000000000000..5a2629f3567c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-basic.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU basic/fallback";
+	compatible = "skov,imx8mp-skov-basic", "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
new file mode 100644
index 000000000000..020f20c8ce66
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
@@ -0,0 +1,798 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "imx8mp.dtsi"
+#include "imx8mp-nominal.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		/* some of this aliases like backlight0, ethernetX and switch0
+		 * are needed for the bootloader.
+		 */
+		backlight0 = &backlight;
+		ethernet0 = &eqos;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs_rtc;
+		switch0 = &switch;
+	};
+
+	/*
+	 * Backlight is present only on some of boards, so it is disabled by
+	 * default.
+	 */
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 20000 0>;
+		power-supply = <&reg_24v>;
+		enable-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		status = "disabled";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			label = "D1";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_STATUS;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "D2";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "D3";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_1v2: regulator-1v2 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v_p>;
+		regulator-name = "1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	reg_2v5: regulator-2v5 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v_s>;
+		regulator-name = "2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v_s>;
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/*
+	 * This regulator will provide power as long as possible even if
+	 * undervoltage is detected.
+	 */
+	reg_5v_p: regulator-5v-p {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_P";
+		vin-supply = <&reg_24v>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/*
+	 * This regulator will be automatically shutdown if undervoltage is
+	 * detected.
+	 */
+	reg_5v_s: regulator-5v-s {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_S";
+		vin-supply = <&reg_24v>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_24v: regulator-24v {
+		compatible = "regulator-fixed";
+		regulator-name = "24V";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg24v>;
+		interrupts-extended = <&gpio4 23 IRQ_TYPE_EDGE_FALLING>;
+		system-critical-regulator;
+		regulator-uv-less-critical-window-ms = <50>;
+	};
+
+	reg_can2rs: regulator-can2rs {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN2RS";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can2rs>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_canrs: regulator-canrs {
+		compatible = "regulator-fixed";
+		regulator-name = "CANRS";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_canrs>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_tft_vcom: regulator-tft-vcom {
+		compatible = "pwm-regulator";
+		pwms = <&pwm4 0 20000 0>;
+		regulator-name = "VCOM";
+		vin-supply = <&reg_5v_s>;
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		regulator-always-on;
+		voltage-table = <3600000 26>;
+		status = "disabled";
+	};
+
+	reg_vsd_3v3: regulator-vsd-3v3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vsd_3v3>;
+		vin-supply = <&reg_vdd_3v3>;
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+/*
+ * Board is passively cooled and heatsink is specced for continuous operation
+ * at 1.2 GHz only. Short bouts of 1.6 GHz are ok, but these should be done
+ * intentionally, not as part of suspend/resume cycles.
+ */
+&{/opp-table/opp-1600000000} {
+	/delete-property/ opp-suspend;
+};
+
+&{/opp-table/opp-1800000000} {
+	/delete-property/ opp-suspend;
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc: adc@0 {
+		compatible = "microchip,mcp3002";
+		reg = <0>;
+		vref-supply = <&reg_vdd_3v3>;
+		spi-max-frequency = <1000000>;
+		#io-channel-cells = <1>;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_canrs>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2rs>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupts-extended = <&gpio1 3 IRQ_TYPE_EDGE_RISING>;
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				regulator-name = "VDD_SOC";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <850000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_dram_1v1: BUCK6 {
+				regulator-name = "NVCC_DRAM_1V1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_snvs_1v8: LDO1 {
+				regulator-name = "NVCC_SNVS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdda_1v8: LDO3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_sd2: LDO5 {
+				regulator-name = "NVCC_SD2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	i2c_rtc: rtc@51 {
+		compatible = "nxp,pcf85063tp";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio4 31 IRQ_TYPE_EDGE_FALLING>;
+		quartz-load-femtofarads = <12500>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <380000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	switch: switch@5f {
+		compatible = "microchip,ksz9893";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_switch>;
+		reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+		reg = <0x5f>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lan1: port@0 {
+				reg = <0>;
+				phy-mode = "internal";
+				label = "lan1";
+			};
+
+			lan2: port@1 {
+				reg = <1>;
+				phy-mode = "internal";
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "cpu";
+				ethernet = <&eqos>;
+				phy-mode = "rgmii";
+				/* 2ns RX delay is implemented on PCB */
+				tx-internal-delay-ps = <2000>;
+				rx-internal-delay-ps = <0>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+	/*
+	 * While there is no CTS line, the property "uart-has-rtscts" is still
+	 * the right thing to do to enable the UART to do RS485. In RS485-Mode
+	 * CTS isn't used anyhow and there is no dedicated property
+	 * "uart-has-rts-but-no-cts".
+	 */
+	uart-has-rtscts;
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+/* SD Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_vsd_3v3>;
+	vqmmc-supply = <&reg_nvcc_sd2>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24			0x0100
+		>;
+	};
+
+	pinctrl_can2rs: can2rsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22			0x154
+		>;
+	};
+
+	pinctrl_canrs: canrsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21			0x154
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK			0x44
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI			0x44
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO			0x44
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13			0x40
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX				0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX				0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX				0x154
+			MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX				0x154
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05			0x19
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06			0x19
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07			0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA				0x400001c2
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14			0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA				0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16			0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA				0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18			0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL				0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA				0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20			0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21			0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03			0x41
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT			0x116
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT			0x116
+		>;
+	};
+
+	pinctrl_reg24v: reg24vgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23			0x154
+		>;
+	};
+
+	pinctrl_reg_vsd_3v3: regvsd3v3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31			0x41
+		>;
+	};
+
+	pinctrl_switch: switchgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00			0x41
+			MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01			0x41
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			/* external 10 k pull up */
+			/* CTP_INT */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28			0x41
+			/* CTP_RST */
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29			0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX			0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX			0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DTE_RTS			0x140
+			/* CTS pin is not connected, but needed as workaround */
+			MX8MP_IOMUXC_UART3_TXD__UART1_DTE_CTS			0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX			0x14f
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX			0x14f
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT			0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT			0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT			0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12			0x1c4
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20				0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B			0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts
new file mode 100644
index 000000000000..32a429437cbd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revB - HDMI";
+	compatible = "skov,imx8mp-skov-revb-hdmi", "fsl,imx8mp";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c5 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD			0x19
+		>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL			0x400001c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26			0x400001c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27			0x400001c2
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
new file mode 100644
index 000000000000..e602c1c96143
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revB - LT6";
+	compatible = "skov,imx8mp-skov-revb-lt6", "fsl,imx8mp";
+
+	lvds-decoder {
+		compatible = "ti,sn65lvds822", "lvds-decoder";
+		power-supply = <&reg_3v3>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				in_lvds1: endpoint {
+					data-mapping = "vesa-24";
+					remote-endpoint = <&ldb_lvds_ch1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	panel {
+		compatible = "logictechno,lttd800480070-l6wh-rt";
+		backlight = <&backlight>;
+		power-supply = <&reg_tft_vcom>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_decoder_out>;
+			};
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <65000>;
+		touchscreen-inverted-y;
+		touchscreen-swapped-x-y;
+		touchscreen-x-plate-ohms = <300>;
+	};
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3600000>;
+	regulator-max-microvolt = <3600000>;
+	voltage-table = <3600000 26>;
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_touch>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+				 <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */
+	assigned-clock-rates = <0>, <462000000>;
+	status = "okay";
+
+	ports {
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&in_lvds1>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK			0x44
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI			0x44
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO			0x44
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09			0x40
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* external pull up */
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25			0x40
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
new file mode 100644
index 000000000000..45c9a6d55bc9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revB - MI1010AIT-1CP1";
+	compatible = "skov,imx8mp-skov-revb-mi1010ait-1cp1", "fsl,imx8mp";
+
+	panel {
+		compatible = "multi-inno,mi1010ait-1cp";
+		backlight = <&backlight>;
+		power-supply = <&reg_tft_vcom>;
+
+		port {
+			in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+		vcc-supply = <&reg_vdd_3v3>;
+		iovcc-supply = <&reg_vdd_3v3>;
+		wakeup-source;
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+				 <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */
+	assigned-clock-rates = <0>, <980000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&in_lvds0>;
+			};
+		};
+	};
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3160000>;
+	regulator-max-microvolt = <3160000>;
+	voltage-table = <3160000 73>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-bd500.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-bd500.dts
new file mode 100644
index 000000000000..b816c6cd3bca
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-bd500.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revC - bd500";
+	compatible = "skov,imx8mp-skov-revc-bd500", "fsl,imx8mp";
+
+	leds {
+		led_system_red: led-3 {
+			label = "bd500:system:red";
+			color = <LED_COLOR_ID_RED>;
+			/* Inverted compared to others due to NMOS inverter */
+			gpios = <&gpioexp 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led_system_green: led-4 {
+			label = "bd500:system:green";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioexp 2 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led_lan1_red: led-5 {
+			label = "bd500:lan1:act";
+			color = <LED_COLOR_ID_RED>;
+			linux,default-trigger = "netdev";
+			gpios = <&gpioexp 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led_lan1_green: led-6 {
+			label = "bd500:lan1:link";
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "netdev";
+			gpios = <&gpioexp 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led_lan2_red: led-7 {
+			label = "bd500:lan2:act";
+			color = <LED_COLOR_ID_RED>;
+			linux,default-trigger = "netdev";
+			gpios = <&gpioexp 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led_lan2_green: led-8 {
+			label = "bd500:lan2:link";
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "netdev";
+			gpios = <&gpioexp 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-1 {
+			label = "S1";
+			linux,code = <KEY_CONFIG>;
+			gpios = <&gpioexp 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	gpioexp: gpio@20 {
+		compatible = "nxp,pca6408";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_exp>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_vdd_3v3>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_exp: gpioexpgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x0
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-tian-g07017.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-tian-g07017.dts
new file mode 100644
index 000000000000..9a562c011f2c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-tian-g07017.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revC - TIAN G07017";
+	compatible = "skov,imx8mp-skov-revc-tian-g07017", "fsl,imx8mp";
+
+	panel {
+		compatible = "topland,tian-g07017-01";
+		backlight = <&backlight>;
+		power-supply = <&reg_tft_vcom>;
+
+		port {
+			in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5506";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+		vcc-supply = <&reg_vdd_3v3>;
+		iovcc-supply = <&reg_vdd_3v3>;
+		wakeup-source;
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+				 <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */
+	assigned-clock-rates = <0>, <358400000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&in_lvds0>;
+			};
+		};
+	};
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3160000>;
+	regulator-max-microvolt = <3160000>;
+	voltage-table = <3160000 73>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi
new file mode 100644
index 000000000000..4e6629f940bf
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi
@@ -0,0 +1,591 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP SoM";
+	compatible = "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	chosen {
+		bootargs = "earlycon=ec_imx6q,0x30890000,115200";
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+	};
+
+	usdhc1_pwrseq: usdhc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+	};
+
+	v_1_8: regulator-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	v_3_3: regulator-3-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+/*
+ * Reserve all physical memory from within the first 1GB of DDR address
+ * space to avoid panic on low memory systems.
+ */
+&dsp_reserved {
+	reg = <0 0x6f000000 0 0x1000000>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eqos_pins>, <&phy0_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&phy0>;
+	snps,force_thresh_dma_mode;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fec_pins>, <&phy1_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&phy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-1 = <&i2c1_gpio_pins>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-0 = <&pmic_pins>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 GPIO_ACTIVE_LOW>;
+		nxp,i2c-lt-enable;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	som_eeprom: eeprom@50{
+		compatible = "st,24c01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-1 = <&i2c2_gpio_pins>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-1 = <&i2c3_gpio_pins>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c4 {
+	/* routed to basler camera connector */
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-1 = <&i2c4_gpio_pins>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&iomuxc {
+	eqos_pins: pinctrl-eqos-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+		>;
+	};
+
+	fec_pins: pinctrl-fec-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+		>;
+	};
+
+	i2c1_pins: pinctrl-i2c1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x400001c3
+		>;
+	};
+
+	i2c1_gpio_pins: pinctrl-i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x400001c3
+		>;
+	};
+
+	i2c2_pins: pinctrl-i2c2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA			0x400001c3
+		>;
+	};
+
+	i2c2_gpio_pins: pinctrl-i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x400001c3
+		>;
+	};
+
+	i2c3_pins: pinctrl-i2c3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x400001c3
+		>;
+	};
+
+	i2c3_gpio_pins: pinctrl-i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x400001c3
+		>;
+	};
+
+	i2c4_pins: pinctrl-i2c4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA			0x400001c3
+		>;
+	};
+
+	i2c4_gpio_pins: pinctrl-i2c4-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20			0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21			0x400001c3
+		>;
+	};
+
+	phy0_pins: pinctrl-phy0-grp {
+		fsl,pins = <
+			/* RESET_N: weak i/o, open drain, external 1k pull-up */
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x20
+			/* INT_N: weak i/o, open drain, internal pull-up */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x160
+		>;
+	};
+
+	phy1_pins: pinctrl-phy-1-grp {
+		fsl,pins = <
+			/* RESET_N: weak i/o, open drain, external 1k pull-up */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x20
+			/* INT_N: weak i/o, open drain, internal pull-up */
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x160
+		>;
+	};
+
+	pmic_pins: pinctrl-pmic-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x41
+		>;
+	};
+
+	uart1_pins: pinctrl-uart1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX		0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX		0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS		0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS		0x140
+			/* BT_REG_ON */
+			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x0
+			/* BT_WAKE_DEV */
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x0
+			/* BT_WAKE_HOST */
+			MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x100
+		>;
+	};
+
+	uart2_pins: pinctrl-uart2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x49
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x49
+		>;
+	};
+
+	usdhc1_pins: pinctrl-usdhc1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0
+			/* WL_REG_ON */
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x0
+			/* WL_WAKE_HOST */
+			MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x100
+		>;
+	};
+
+	usdhc1_100mhz_pins: pinctrl-usdhc1g-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4
+		>;
+	};
+
+	usdhc1_200mhz_pins: pinctrl-usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6
+		>;
+	};
+
+	usdhc3_pins: pinctrl-usdhc3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
+		>;
+	};
+
+	usdhc3_100mhz_pins: pinctrl-usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
+		>;
+	};
+
+	usdhc3_200mhz_pins: pinctrl-usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196
+		>;
+	};
+
+	wdog1_pins: pinctrl-wdog1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0x140
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	uart-has-rtscts;
+	/* select 80MHz parent clock to support maximum baudrate 4Mbps */
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		/* Murata 1MW module supports max. 3M baud */
+		max-speed = <3000000>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usdhc1_pins>;
+	pinctrl-1 = <&usdhc1_100mhz_pins>;
+	pinctrl-2 = <&usdhc1_200mhz_pins>;
+	vmmc-supply = <&v_3_3>;
+	vqmmc-supply = <&v_1_8>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&usdhc3_pins>;
+	pinctrl-1 = <&usdhc3_100mhz_pins>;
+	pinctrl-2 = <&usdhc3_200mhz_pins>;
+	vmmc-supply = <&v_3_3>;
+	vqmmc-supply = <&v_1_8>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wdog1_pins>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts
new file mode 100644
index 000000000000..6f9dcd3a75c8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (C) 2025 Toradex */
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+
+#include "imx8mp-toradex-smarc.dtsi"
+
+/ {
+	model = "Toradex SMARC iMX8M Plus on Toradex SMARC Development Board";
+	compatible = "toradex,smarc-imx8mp-dev",
+		     "toradex,smarc-imx8mp",
+		     "fsl,imx8mp";
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "J64";
+		type = "a";
+
+		port {
+			native_hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	reg_carrier_1p8v: regulator-carrier-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "On-carrier 1V8";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "tdx-smarc-wm8904";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
+			sound-dai = <&wm8904_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+/* SMARC SPI0 */
+&ecspi1 {
+	status = "okay";
+};
+
+/* SMARC GBE0 */
+&eqos {
+	status = "okay";
+};
+
+/* SMARC GBE1 */
+&fec {
+	status = "okay";
+};
+
+/* SMARC CAN1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* SMARC CAN0 */
+&flexcan2 {
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio7>,
+		    <&pinctrl_gpio8>,
+		    <&pinctrl_gpio9>,
+		    <&pinctrl_gpio10>,
+		    <&pinctrl_gpio11>,
+		    <&pinctrl_gpio12>,
+		    <&pinctrl_gpio13>;
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>, <&pinctrl_gpio6>;
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+/* SMARC HDMI */
+&hdmi_tx {
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&native_hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+/* SMARC I2C_LCD */
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* I2C on DSI Connector Pins 4/6 */
+		i2c_dsi_0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* I2C on DSI Connector Pins 52/54 */
+		i2c_dsi_1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+/* SMARC I2C_CAM0 */
+&i2c3 {
+	status = "okay";
+};
+
+/* SMARC I2C_GP */
+&i2c4 {
+	/* Audio Codec */
+	wm8904_1a: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1>, <&pinctrl_sai1_mclk>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_carrier_1p8v>;
+		CPVDD-supply = <&reg_carrier_1p8v>;
+		DBVDD-supply = <&reg_carrier_1p8v>;
+		DCVDD-supply = <&reg_carrier_1p8v>;
+		MICVDD-supply = <&reg_carrier_1p8v>;
+	};
+
+	/* On-Carrier Temperature Sensor */
+	temperature-sensor@4f {
+		compatible = "ti,tmp1075";
+		reg = <0x4f>;
+	};
+
+	/* On-Carrier EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* SMARC I2C_CAM1 */
+&i2c5 {
+	status = "okay";
+};
+
+/* SMARC I2C_PM */
+&i2c6 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* Fan controller */
+	fan_controller: fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+		#pwm-cells = <2>;
+
+		fan {
+			cooling-levels = <255>;
+			pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>;
+		};
+	};
+
+	/* Current measurement into module VDD */
+	hwmon@40 {
+		compatible = "ti,ina226";
+		reg = <0x40>;
+		shunt-resistor = <5000>;
+	};
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+/* SMARC PCIE_A, M2 Key B */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* SMARC LCD1_BKLT_PWM */
+&pwm1 {
+	status = "okay";
+};
+
+/* SMARC LCD0_BKLT_PWM */
+&pwm2 {
+	status = "okay";
+};
+
+/* SMARC I2S0 */
+&sai1 {
+	assigned-clocks = <&clk IMX8MP_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+/* SMARC HDMI Audio */
+&sound_hdmi {
+	status = "okay";
+};
+
+/* SMARC SER0, RS485. Optional M.2 KEY E */
+&uart1 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* SMARC SER2 */
+&uart2 {
+	status = "okay";
+};
+
+/* SMARC SER1, used as the Linux Console */
+&uart4 {
+	status = "okay";
+};
+
+/* SMARC USB0 */
+&usb3_0 {
+	status = "okay";
+};
+
+/* SMARC USB1..4 */
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* SMARC SDIO */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi
new file mode 100644
index 000000000000..bebe19eb360f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi
@@ -0,0 +1,1308 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (C) 2025 Toradex */
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx8mp.dtsi"
+
+/ {
+	aliases {
+		can0 = &flexcan2;
+		can1 = &flexcan1;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+		serial0 = &uart1;
+		serial1 = &uart4;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_id>;
+		id-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		label = "USB0";
+		self-powered;
+		type = "micro";
+		vbus-supply = <&reg_usb0_vbus>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_0_dwc>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sleep>;
+
+		smarc_key_sleep: key-sleep {
+			gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
+			label = "SMARC_SLEEP#";
+			wakeup-source;
+			linux,code = <KEY_SLEEP>;
+		};
+
+		smarc_switch_lid: switch-lid {
+			gpios = <&som_ec_gpio_expander 2 GPIO_ACTIVE_LOW>;
+			label = "SMARC_LID#";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_en_oc>;
+		gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "USB0_EN_OC#";
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_en_oc>;
+		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "USB2_EN_OC#";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
+		gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <100000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3V3_SD";
+		startup-delay-us = <20000>;
+	};
+
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vsel>;
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <1800000>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		regulator-name = "PMIC_USDHC_VSELECT";
+		vin-supply = <&reg_sd_3v3_1v8>;
+	};
+
+	reg_wifi_en: regulator-wifi-en {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_pwr_en>;
+		gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "CTRL_EN_WIFI";
+		startup-delay-us = <2000>;
+	};
+
+	reserved-memory {
+		linux,cma {
+			size = <0 0x20000000>;
+			alloc-ranges = <0 0x40000000 0 0x80000000>;
+		};
+	};
+
+	sound_hdmi: sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+		status = "disabled";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+/* SMARC SPI0 */
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, <&gpio4 28 GPIO_ACTIVE_LOW>;
+};
+
+/* SMARC SPI1 */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_tpm_cs>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio4 3 GPIO_ACTIVE_LOW>,
+		   <&gpio3 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@2 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <2>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* SMARC GBE0 */
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>,
+		    <&pinctrl_eth_mdio>,
+		    <&pinctrl_eqos_1588_event>;
+	phy-handle = <&eqos_phy>;
+	phy-mode = "rgmii-id";
+	snps,force_thresh_dma_mode;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+
+	mdio: mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+};
+
+/* SMARC GBE1 */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>, <&pinctrl_fec_1588_event>;
+	phy-handle = <&fec_phy>;
+	phy-mode = "rgmii-id";
+	fsl,magic-packet;
+};
+
+/* SMARC CAN1 */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+/* SMARC CAN0 */
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&gpio1 {
+	gpio-line-names = "SMARC_GPIO7", /* 0 */
+			  "SMARC_GPIO8",
+			  "",
+			  "PMIC_INT#",
+			  "PMIC_USDHC_VSELECT",
+			  "SMARC_GPIO9",
+			  "SMARC_GPIO10",
+			  "SMARC_GPIO11",
+			  "SMARC_GPIO12",
+			  "",
+			  "SMARC_GPIO5", /* 10 */
+			  "",
+			  "SMARC_USB0_EN_OC#",
+			  "SMARC_GPIO13",
+			  "SMARC_USB2_EN_OC#";
+};
+
+&gpio2 {
+	gpio-line-names = "", /* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "", /* 10 */
+			  "",
+			  "SMARC_SDIO_CD#",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SDIO_PWR_EN",
+			  "SMARC_SDIO_WP"; /* 20 */
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds_dsi_sel>;
+	gpio-line-names = "ETH_0_INT#", /* 0 */
+			  "SLEEP#",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "TPM_CS#",
+			  "LVDS_DSI_SEL",
+			  "MCU_INT#",
+			  "GPIO_EX_INT#",
+			  "", /* 10 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SMB_ALERT#",
+			  "",
+			  "",
+			  "",
+			  "SMARC_I2C_PM_DAT", /* 20 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_I2C_PM_CK";
+};
+
+&gpio4 {
+	gpio-line-names = "SMARC_PCIE_WAKE#", /* 0 */
+			  "",
+			  "",
+			  "SMARC_SPI1_CS1#",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "", /* 10 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_GPIO4",
+			  "SMARC_PCIE_A_RST#",
+			  "", /* 20 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SPI0_CS1#",
+			  "SMARC_GPIO6";
+};
+
+&gpio5 {
+	gpio-line-names = "", /* 0 */
+			  "",
+			  "SMARC_USB0_OTG_ID",
+			  "SMARC_I2C_CAM1_CK",
+			  "SMARC_I2C_CAM1_DAT",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SPI0_CS0#",
+			  "", /* 10 */
+			  "",
+			  "",
+			  "SMARC_SPI1_CS0#",
+			  "CTRL_I2C_SCL",
+			  "CTRL_I2C_SDA",
+			  "SMARC_I2C_LCD_CK",
+			  "SMARC_I2C_LCD_DAT",
+			  "SMARC_I2C_CAM0_CK",
+			  "SMARC_I2C_CAM0_DAT",
+			  "SMARC_I2C_GP_CK", /* 20 */
+			  "SMARC_I2C_GP_DAT";
+};
+
+/* SMARC HDMI */
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+};
+
+/* On-module I2C */
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+	status = "okay";
+
+	som_gpio_expander: gpio@21 {
+		compatible = "nxp,pcal6408";
+		reg = <0x21>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6408>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio3>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"SMARC_GPIO0",
+			"SMARC_GPIO1",
+			"SMARC_GPIO2",
+			"SMARC_GPIO3",
+			"SMARC_LCD0_VDD_EN",
+			"SMARC_LCD0_BKLT_EN",
+			"SMARC_LCD1_VDD_EN",
+			"SMARC_LCD1_BKLT_EN";
+	};
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "+VDD_SOC (PMIC BUCK1)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "+VDD_ARM (PMIC BUCK2)";
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_3v3: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "+V3.3 (PMIC BUCK4)";
+			};
+
+			reg_1v8: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8 (PMIC BUCK5)";
+			};
+
+			BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "+VDD_DDR (PMIC BUCK6)";
+			};
+
+			LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1710000>;
+				regulator-name = "+V1.8_SNVS (PMIC LDO1)";
+			};
+
+			LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8A (PMIC LDO3)";
+			};
+
+			LDO4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "+V3.3_ADC (PMIC LDO4)";
+			};
+
+			reg_sd_3v3_1v8: LDO5 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V3.3_1.8_SD (PMIC LDO5)";
+			};
+		};
+	};
+
+	embedded-controller@28 {
+		compatible = "toradex,smarc-imx8mp-ec", "toradex,smarc-ec";
+		reg = <0x28>;
+	};
+
+	som_ec_gpio_expander: gpio@29 {
+		compatible = "toradex,ecgpiol16", "nxp,pcal6416";
+		reg = <0x29>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mcu_int>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"SMARC_CHARGER_PRSNT#",
+			"SMARC_CHARGING#",
+			"SMARC_LID#",
+			"SMARC_BATLOW#";
+	};
+
+	rtc_i2c: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp1075";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+/* SMARC I2C_LCD */
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	clock-frequency = <100000>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+};
+
+/* SMARC I2C_CAM0 */
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+};
+
+/* SMARC I2C_GP */
+&i2c4 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "st,24c32", "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+/* SMARC I2C_CAM1 */
+&i2c5 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio5 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+};
+
+/* SMARC I2C_PM */
+&i2c6 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+};
+
+&mdio {
+	eqos_phy: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+
+	fec_phy: ethernet-phy@2 {
+		reg = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+/* SMARC PCIE_A */
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+};
+
+/* SMARC LCD1_BKLT_PWM */
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd1_bklt_pwm1>;
+};
+
+/* SMARC LCD0_BKLT_PWM */
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd0_bklt_pwm2>;
+};
+
+/* SMARC GPIO5 as PWM */
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio5_pwm>;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* SMARC SER0 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+};
+
+/* SMARC SER2 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+/* On-module Bluetooth, optional SMARC SER3 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_bt_uart>;
+	uart-has-rtscts;
+	status = "okay";
+
+	som_bt: bluetooth {
+		compatible = "mrvl,88w8997";
+		max-speed = <921600>;
+	};
+};
+
+/* SMARC SER1, used as the Linux Console */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+/* SMARC USB0 */
+&usb3_0 {
+	fsl,disable-port-power-control;
+};
+
+/* SMARC USB1..4 */
+&usb3_1 {
+	fsl,disable-port-power-control;
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb1_vbus>;
+};
+
+&usb_dwc3_0 {
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	maximum-speed = "high-speed";
+	srp-disable;
+	usb-role-switch;
+
+	port {
+		usb3_0_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+/* On-module Wi-Fi */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	keep-power-in-suspend;
+	non-removable;
+	vmmc-supply = <&reg_wifi_en>;
+	status = "okay";
+};
+
+/* SMARC SDIO */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>,
+		    <&pinctrl_usdhc2_cd>,
+		    <&pinctrl_usdhc2_wp>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>,
+		    <&pinctrl_usdhc2_cd>,
+		    <&pinctrl_usdhc2_wp>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>,
+		    <&pinctrl_usdhc2_cd>,
+		    <&pinctrl_usdhc2_wp>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>,
+		    <&pinctrl_usdhc2_cd_sleep>,
+		    <&pinctrl_usdhc2_wp>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+};
+
+/* On-module eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	/* On-module Bluetooth */
+	pinctrl_bt_uart: btuartgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX	0x1c4>, /* WiFi_UART_TXD */
+			   <MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX	0x1c4>, /* WiFi_UART_RXD */
+			   <MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS	0x1c4>, /* WiFi_UART_RTS */
+			   <MX8MP_IOMUXC_SD1_RESET_B__UART3_DCE_RTS	0x1c4>; /* WiFi_UART_CTS */
+	};
+
+	/* SMARC CAM_MCK */
+	pinctrl_csi_mclk: csimclkgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO15__CCM_CLKO2	0x16>; /* SMARC S6 - CAM_MCK  */
+	};
+
+	/* SMARC SPI0 */
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO	0x1c4>, /* SMARC P45 - SPI0_DIN */
+			   <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI	0x4>,   /* SMARC P46 - SPI0_DO */
+			   <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK	0x4>,   /* SMARC P44 - SPI0_CK */
+			   <MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x1c4>, /* SMARC P43 - SPI0_CS0# */
+			   <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x1c4>; /* SMARC P31 - SPI0_CS1# */
+	};
+
+	/* SMARC SPI1 */
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x1c4>, /* SMARC P56 - SPI1_DIN */
+			   <MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x4>,   /* SMARC P57 - SPI1_DO */
+			   <MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x4>,   /* SMARC P58 - SPI1_CK */
+			   <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x1c4>, /* SMARC P54 - SPI1_CS0# */
+			   <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x1c4>; /* SMARC P55 - SPI1_CS1# */
+	};
+
+	/* ETH_0 RGMII (On-module PHY) */
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90>, /* ETH0_RGMII_RXD0 */
+			   <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90>, /* ETH0_RGMII_RXD1 */
+			   <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90>, /* ETH0_RGMII_RXD2 */
+			   <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90>, /* ETH0_RGMII_RXD3 */
+			   <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90>, /* ETH0_RGMII_RXC */
+			   <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90>, /* ETH0_RGMII_RX_CTL */
+			   <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x16>, /* ETH0_RGMII_TXD0 */
+			   <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x16>, /* ETH0_RGMII_TXD1 */
+			   <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x16>, /* ETH0_RGMII_TXD2 */
+			   <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x16>, /* ETH0_RGMII_TXD3 */
+			   <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x16>, /* ETH0_RGMII_TX_CTL */
+			   <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16>; /* ETH0_RGMII_TXC */
+	};
+
+	/* SMARC GBE0_SDP */
+	pinctrl_eqos_1588_event: eqos1588eventgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO09__ENET_QOS_1588_EVENT0_OUT	0x4>; /* SMARC P6 - GBE0_SDP */
+	};
+
+	/* ETH_0_MDIO and ETH_0_INT# shared between ETH_PHY0 and ETH_PHY1 */
+	pinctrl_eth_mdio: ethmdiogrp {
+		fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x2>,  /* ETH_0_MDC */
+			   <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO	0x2>,  /* ETH_0_MDIO */
+			   <MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00		0x80>; /* ETH_0_INT# */
+	};
+
+	/* ETH_1 RGMII (On-module PHY) */
+	pinctrl_fec: fecgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x90>, /* ETH1_RGMII_RXD0 */
+			   <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x90>, /* ETH1_RGMII_RXD1 */
+			   <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x90>, /* ETH1_RGMII_RXD2 */
+			   <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x90>, /* ETH1_RGMII_RXD3 */
+			   <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC	0x90>, /* ETH1_RGMII_RXC */
+			   <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90>, /* ETH1_RGMII_RX_CTL */
+			   <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x16>, /* ETH1_RGMII_TXD0 */
+			   <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x16>, /* ETH1_RGMII_TXD1 */
+			   <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x16>, /* ETH1_RGMII_TXD2 */
+			   <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x16>, /* ETH1_RGMII_TXD3 */
+			   <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x16>, /* ETH1_RGMII_TX_CTL */
+			   <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x16>; /* ETH1_RGMII_TXC */
+	};
+
+	/* SMARC GBE1_SDP */
+	pinctrl_fec_1588_event: fec1588eventgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT	0x4>; /* SMARC P5 - GBE1_SDP */
+	};
+
+	/* SMARC CAN1 */
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_TXC__CAN1_RX	0x154>, /* SMARC P146 - CAN1_RX */
+			   <MX8MP_IOMUXC_SAI2_RXC__CAN1_TX	0x154>; /* SMARC P145 - CAN1_TX */
+	};
+
+	/* SMARC CAN0 */
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX	0x154>, /* SMARC P144 - CAN0_RX */
+			   <MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX	0x154>; /* SMARC P143 - CAN0_TX */
+	};
+
+	/* SMARC GPIO4 */
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x144>; /* SMARC P112 - GPIO4 */
+	};
+
+	/* SMARC GPIO5 */
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x144>; /* SMARC P113 - GPIO5 */
+	};
+
+	/* SMARC GPIO5 as PWM */
+	pinctrl_gpio5_pwm: gpio5pwmgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT	0x12>; /* SMARC P113 - PWM_OUT */
+	};
+
+	/* SMARC GPIO6 */
+	pinctrl_gpio6: gpio6grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x144>; /* SMARC P114 - GPIO6 */
+	};
+
+	/* SMARC GPIO7 */
+	pinctrl_gpio7: gpio7grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00	0x144>; /* SMARC P115 - GPIO7 */
+	};
+
+	/* SMARC GPIO8 */
+	pinctrl_gpio8: gpio8grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01	0x144>; /* SMARC P116 - GPIO8 */
+	};
+
+	/* SMARC GPIO9 */
+	pinctrl_gpio9: gpio9grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05	0x144>; /* SMARC P117 - GPIO9 */
+	};
+
+	/* SMARC GPIO10 */
+	pinctrl_gpio10: gpio10grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06	0x144>; /* SMARC P118 - GPIO10 */
+	};
+
+	/* SMARC GPIO11 */
+	pinctrl_gpio11: gpio11grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07	0x144>; /* SMARC P119 - GPIO11 */
+	};
+
+	/* SMARC GPIO12 */
+	pinctrl_gpio12: gpio12grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08	0x144>; /* SMARC S142 - GPIO12 */
+	};
+
+	/* SMARC GPIO13 */
+	pinctrl_gpio13: gpio13grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x144>; /* SMARC S123 - GPIO13 */
+	};
+
+	/* SMARC HDMI */
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c6>, /* SMARC P105 - HDMI_CTRL_CK */
+			   <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c6>, /* SMARC P106 - HDMI_CTRL_DAT */
+			   <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x180>;      /* SMARC P104 - HDMI_HPD */
+	};
+
+	/* On-module I2C */
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL	0x400001c6>, /* CTRL_I2C_SCL */
+			   <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA	0x400001c6>; /* CTRL_I2C_SDA */
+	};
+
+	/* On-module I2C as GPIOs */
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x400001c6>, /* CTRL_I2C_SCL */
+			   <MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x400001c6>; /* CTRL_I2C_SDA */
+	};
+
+	/* SMARC I2C_LCD */
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL	0x400001c6>, /* SMARC S139 - I2C_LCD_CK */
+			   <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA	0x400001c6>; /* SMARC S140 - I2C_LCD_DAT */
+	};
+
+	/* SMARC I2C_LCD as GPIOs */
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x400001c6>, /* SMARC S139 - I2C_LCD_CK */
+			   <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x400001c6>; /* SMARC S140 - I2C_LCD_DAT */
+	};
+
+	/* SMARC I2C_CAM0 */
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL	0x400001c6>, /* SMARC S5 - I2C_CAM0_CK */
+			   <MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA	0x400001c6>; /* SMARC S7 - I2C_CAM0_DAT */
+	};
+
+	/* SMARC I2C_CAM0 as GPIOs */
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x400001c6>, /* SMARC S5 - I2C_CAM0_CK */
+			   <MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x400001c6>; /* SMARC S7 - I2C_CAM0_DAT */
+	};
+
+	/* SMARC I2C_GP */
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL	0x400001c6>, /* SMARC S48 - I2C_GP_CK */
+			   <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA	0x400001c6>; /* SMARC S49 - I2C_GP_DAT */
+	};
+
+	/* SMARC I2C_GP as GPIOs */
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20	0x400001c6>, /* SMARC S48 - I2C_GP_CK */
+			   <MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x400001c6>; /* SMARC S49 - I2C_GP_DAT */
+	};
+
+	/* SMARC I2C_CAM1 */
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA	0x400001c6>, /* SMARC S2 - I2C_CAM1_DAT  */
+			   <MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL	0x400001c6>; /* SMARC S1 - I2C_CAM1_CK  */
+	};
+
+	/* SMARC I2C_CAM1 as GPIOs */
+	pinctrl_i2c5_gpio: i2c5gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04	0x400001c6>, /* SMARC S2 - I2C_CAM1_DAT  */
+			   <MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03	0x400001c6>; /* SMARC S1 - I2C_CAM1_CK  */
+	};
+
+	/* SMARC I2C_PM */
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <MX8MP_IOMUXC_HDMI_CEC__I2C6_SCL	0x400001c6>, /* SMARC P121 - I2C_PM_CK */
+			   <MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA	0x400001c6>; /* SMARC P122 - I2C_PM_DAT */
+	};
+
+	/* SMARC I2C_PM as GPIOs */
+	pinctrl_i2c6_gpio: i2c6gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_HDMI_CEC__GPIO3_IO28	0x400001c6>, /* SMARC P121 - I2C_PM_CK */
+			   <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20	0x400001c6>; /* SMARC P122 - I2C_PM_DAT */
+	};
+
+	pinctrl_lvds_dsi_sel: lvdsdsiselgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x104>; /* LVDS_DSI_SEL */
+	};
+
+	pinctrl_mcu_int: mcuintgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08	0x1C0>; /* MCU_INT# */
+	};
+
+	/* SMARC LCD1_BKLT_PWM */
+	pinctrl_lcd1_bklt_pwm1: pwm1grp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT	0x12>; /* SMARC S122 - LCD1_BKLT_PWM */
+	};
+
+	/* SMARC LCD0_BKLT_PWM */
+	pinctrl_lcd0_bklt_pwm2: pwm2grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT	0x12>; /* SMARC S141 - LCD0_BKLT_PWM */
+	};
+
+	/* PCAL6408 Interrupt */
+	pinctrl_pcal6408: pcal6408intgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09	0x1c4>; /* GPIO_EX_INT# */
+	};
+
+	/* SMARC PCIE_A */
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x1c0>, /* SMARC S146 - PCIE_WAKE# */
+			   <MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x04>;  /* SMARC P75 - PCIE_A_RST# */
+	};
+
+	/* PMIC Interrupt */
+	pinctrl_pmic: pmicintgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x1c4>; /* PMIC_INT# */
+	};
+
+	/* SMARC I2S0 */
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK	0x94>, /* SMARC S42 - I2S0_CK */
+			   <MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC	0x94>, /* SMARC S39 - I2S0_LRCLK */
+			   <MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00	0x94>, /* SMARC S41 - I2S0_SDIN */
+			   <MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00	0x94>; /* SMARC S40 - I2S0_SDOUT */
+	};
+
+	/* SMARC AUDIO_MCK */
+	pinctrl_sai1_mclk: sai1mclkgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK	0x96>; /* SMARC S38 - AUDIO_MCK */
+	};
+
+	/* SMARC I2S2 */
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0x94>, /* SMARC S52 - I2S2_SDIN */
+			   <MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0x94>, /* SMARC S53 - I2S2_CK */
+			   <MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0x94>, /* SMARC S51 - I2S2_SDOUT */
+			   <MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0x94>; /* SMARC S50 - I2S2_LRCLK */
+	};
+
+	/* SMARC SLEEP# */
+	pinctrl_sleep: sleepgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x1C0>; /* SMARC S149 - SLEEP# */
+	};
+
+	/* SMARC SMB_ALERT# */
+	pinctrl_smb_alert: smbalertgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x1C0>; /* SMARC P1 - SMB_ALERT# */
+	};
+
+	/* TPM_CS# */
+	pinctrl_tpm_cs: tpmcsgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x82>; /* TPM_CS# */
+	};
+
+	/* WIFI_BT_WKUP_HOST/TPM_INT# */
+	pinctrl_tpm_irq_wifi_bt_wkup: tpmirq-wifibtwkupgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04	0x16>; /* WIFI_BT_WKUP_HOST/TPM_INT# */
+	};
+
+	/* SMARC SER0 */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS	0x1c4>, /* SMARC P132 - SER2_CTS */
+			   <MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS	0x1c4>, /* SMARC P131 - SER2_RTS */
+			   <MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x1c4>, /* SMARC P130 - SER2_RX */
+			   <MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x1c4>; /* SMARC P139 - SER2_TX */
+	};
+
+	/* SMARC SER2 */
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS	0x1c4>, /* SMARC P139 - SER2_CTS */
+			   <MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS	0x1c4>, /* SMARC P138 - SER2_RTS */
+			   <MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x1c4>, /* SMARC P137 - SER2_RX */
+			   <MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x1c4>; /* SMARC P136 - SER2_TX */
+	};
+
+	/* SMARC SER3 */
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x1c4>, /* SMARC P141 - SER3_RX */
+			   <MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x1c4>; /* SMARC P140 - SER3_TX */
+	};
+
+	/* SMARC SER1 */
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x1c4>, /* SMARC P135 - SER1_RX */
+			   <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x1c4>; /* SMARC P134 - SER1_TX */
+	};
+
+	/* SMARC USB0_OTG_ID */
+	pinctrl_usb0_id: usb0idgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02	0x1c4>; /* SMARC P64 - USB0_OTG_ID */
+	};
+
+	/* SMARC USB0_EN_OC# */
+	pinctrl_usb0_en_oc: usb0enocgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12	0x04>; /* SMARC P62 - USB0_EN_OC# */
+	};
+
+	/* On module USB Hub VBUS, or SMARC USB2_EN_OC# depending on assembling */
+	pinctrl_usb1_en_oc: usb1enocgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14	0x04>; /* SMARC P71 - USB2_EN_OC# */
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190>, /* WiFi_SDIO_CLK */
+			   <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0>, /* WiFi_SDIO_CMD */
+			   <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0>, /* WiFi_SDIO_DATA0 */
+			   <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0>, /* WiFi_SDIO_DATA1 */
+			   <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0>, /* WiFi_SDIO_DATA2 */
+			   <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0>; /* WiFi_SDIO_DATA3 */
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194>, /* WiFi_SDIO_CLK */
+			   <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4>, /* WiFi_SDIO_CMD */
+			   <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4>, /* WiFi_SDIO_DATA0 */
+			   <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4>, /* WiFi_SDIO_DATA1 */
+			   <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4>, /* WiFi_SDIO_DATA2 */
+			   <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4>; /* WiFi_SDIO_DATA3 */
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196>, /* WiFi_SDIO_CLK */
+			   <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6>, /* WiFi_SDIO_CMD */
+			   <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6>, /* WiFi_SDIO_DATA0 */
+			   <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6>, /* WiFi_SDIO_DATA1 */
+			   <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6>, /* WiFi_SDIO_DATA2 */
+			   <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6>; /* WiFi_SDIO_DATA3 */
+	};
+
+	/* SMARC SDIO */
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190>, /* SMARC P36 - SDIO_CK */
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0>, /* SMARC P34 - SDIO_CMD */
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0>, /* SMARC P39 - SDIO_DO */
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0>, /* SMARC P40 - SDIO_D1 */
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0>, /* SMARC P41 - SDIO_D2 */
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0>; /* SMARC P42 - SDIO_D3 */
+	};
+
+	/* SMARC SDIO 100MHz */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>, /* SMARC P36 - SDIO_CK */
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>, /* SMARC P34 - SDIO_CMD */
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>, /* SMARC P39 - SDIO_DO */
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>, /* SMARC P40 - SDIO_D1 */
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>, /* SMARC P41 - SDIO_D2 */
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>; /* SMARC P42 - SDIO_D3 */
+	};
+
+	/* SMARC SDIO 200MHz */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196>, /* SMARC P36 - SDIO_CK */
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6>, /* SMARC P34 - SDIO_CMD */
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6>, /* SMARC P39 - SDIO_DO */
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6>, /* SMARC P40 - SDIO_D1 */
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6>, /* SMARC P41 - SDIO_D2 */
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6>; /* SMARC P42 - SDIO_D3 */
+	};
+
+	/* SMARC SDIO_CD# */
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4>; /* SMARC P35 - SDIO_CD# */
+	};
+
+	/* SMARC SDIO_CD# */
+	pinctrl_usdhc2_cd_sleep: usdhc2cdslpgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x0>; /* SMARC P35 - SDIO_CD# */
+	};
+
+	/* SMARC SDIO_PWR_EN */
+	pinctrl_usdhc2_pwr_en: usdhc2pwrengrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x1c4>; /* SMARC P37 - SDIO_PWR_EN */
+	};
+
+	/* SMARC SDIO Sleep - Avoid backfeeding with removed card power */
+	pinctrl_usdhc2_sleep: usdhc2slpgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x100>, /* SMARC P36 - SDIO_CK */
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x100>, /* SMARC P34 - SDIO_CMD */
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x100>, /* SMARC P39 - SDIO_DO */
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x100>, /* SMARC P39 - SDIO_D1 */
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x100>, /* SMARC P39 - SDIO_D2 */
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x100>; /* SMARC P39 - SDIO_D3 */
+	};
+
+	pinctrl_usdhc2_vsel: usdhc2vselgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04	0x4>; /* PMIC_USDHC_VSELECT */
+	};
+
+	/* SMARC SDIO_WP */
+	pinctrl_usdhc2_wp: usdhc2wpgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_WP__GPIO2_IO20	0x144>; /* SMARC P33 - SDIO_WP */
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190>, /* eMMC_STROBE */
+			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0>, /* eMMC_DATA5 */
+			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0>, /* eMMC_DATA6 */
+			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0>, /* eMMC_DATA7 */
+			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0>, /* eMMC_DATA0 */
+			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0>, /* eMMC_DATA1 */
+			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0>, /* eMMC_DATA2 */
+			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0>, /* eMMC_DATA3 */
+			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0>, /* eMMC_DATA4 */
+			   <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190>, /* eMMC_CLK */
+			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0>; /* eMMC_CMD */
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194>, /* eMMC_STROBE */
+			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4>, /* eMMC_DATA5 */
+			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4>, /* eMMC_DATA6 */
+			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>, /* eMMC_DATA7 */
+			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4>, /* eMMC_DATA0 */
+			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4>, /* eMMC_DATA1 */
+			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4>, /* eMMC_DATA2 */
+			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4>, /* eMMC_DATA3 */
+			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4>, /* eMMC_DATA4 */
+			   <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>, /* eMMC_CLK */
+			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>; /* eMMC_CMD */
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196>, /* eMMC_STROBE */
+			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d2>, /* eMMC_DATA5 */
+			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d2>, /* eMMC_DATA6 */
+			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d2>, /* eMMC_DATA7 */
+			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d2>, /* eMMC_DATA0 */
+			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d2>, /* eMMC_DATA1 */
+			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d2>, /* eMMC_DATA2 */
+			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d2>, /* eMMC_DATA3 */
+			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d2>, /* eMMC_DATA4 */
+			   <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196>, /* eMMC_CLK */
+			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6>; /* eMMC_CMD */
+	};
+
+	/* SoC Watchdog */
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x4>; /* CTRL_SOC_WDOG */
+	};
+
+	/* On-module Wi-Fi power enable */
+	pinctrl_wifi_pwr_en: wifipwrengrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x104>; /* CTRL_EN_WIFI */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso
new file mode 100644
index 000000000000..e5a2b3780215
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+#include "imx8mp-pinfunc.h"
+
+&{/} {
+	/*
+	 * The three camera regulators are controlled by a single GPIO. Declare
+	 * a single regulator for the three supplies.
+	 */
+	reg_cam: regulator-cam {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam";
+		/* pad muxing already done in gpio2grp */
+		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vcc_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	cam24m: clock-cam24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "cam24m";
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	camera@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		clocks = <&cam24m>;
+		VANA-supply = <&reg_cam>;
+		VDIG-supply = <&reg_cam>;
+		VDDL-supply = <&reg_cam>;
+		orientation = <2>;
+		rotation = <0>;
+
+		port {
+			sony_imx219: endpoint {
+				remote-endpoint = <&imx8mp_mipi_csi_in>;
+				clock-lanes = <0>;
+				clock-noncontinuous;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <456000000>;
+			};
+		};
+	};
+};
+
+&isi_0 {
+	status = "disabled";
+
+	ports {
+		port@0 {
+			/delete-node/ endpoint;
+		};
+	};
+};
+
+&isp_0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			isp0_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
+				remote-endpoint = <&mipi_csi_0_out>;
+			};
+		};
+	};
+};
+
+&mipi_csi_0 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			imx8mp_mipi_csi_in: endpoint {
+				remote-endpoint = <&sony_imx219>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&mipi_csi_0_out {
+	remote-endpoint = <&isp0_in>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
new file mode 100644
index 000000000000..f7346b3d35fe
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
@@ -0,0 +1,907 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2023-2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Martin Schmiedel
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp-tqma8mpql.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MP-RAS314";
+	compatible = "tq,imx8mp-tqma8mpql-mba8mp-ras314", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		rtc0 = &pcf85063;
+		rtc1 = &snvs_rtc;
+	};
+
+	/* X8 */
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm2 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_vcc_12v0>;
+		enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	/* X7 + X8 */
+	display: display {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvdsdisplay>;
+		power-supply = <&reg_vcc_3v3>;
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight_lvds>;
+		status = "disabled";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <0>;
+			gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X9";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+
+	reg_vcc_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vcc_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x38000000>;
+			alloc-ranges = <0 0x40000000 0 0xB0000000>;
+			linux,cma-default;
+		};
+	};
+
+	rfkill {
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rfkill>;
+		label = "rfkill-pcie-wlan";
+		radio-type = "wlan";
+		shutdown-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tq-mba8mp-ras314";
+		audio-cpu = <&sai5>;
+		audio-codec = <&tlv320aic3x04>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR";
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>, <&gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy3: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&gpio4>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+
+	gpio-line-names = "WIFI_PMIC_EN", "LVDS_RESET#", "", "",
+			  "", "", "GPIO8", "",
+			  "", "", "", "",
+			  "", "", "GPIO12", "GPIO13",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+
+	wifi-pmic-en-hog {
+		gpio-hog;
+		gpios = <0 0>;
+		output-high;
+		line-name = "WIFI_PMIC_EN";
+	};
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>;
+
+	gpio-line-names = "GPIO22", "GPIO23", "GPIO24", "GPIO25",
+			  "GPIO26", "GPIO27", "CAM_GPIO1", "CAM_GPIO2",
+			  "", "", "GPIO1", "GPIO0",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3>;
+
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "TEMP_EVENT#", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "HDMI_OC#", "GPIO14", "GPIO15", "GPIO16",
+			  "GPIO17", "PCIE_WAKE#", "GPIO19", "GPIO20",
+			  "PCIE_PERST#", "", "", "";
+
+	pewake-hog {
+		gpio-hog;
+		gpios = <25 0>;
+		input;
+		line-name = "PCIE_WAKE#";
+	};
+};
+
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio5>, <&pinctrl_gpt1_gpio>,
+		    <&pinctrl_gpt2_gpio>, <&pinctrl_gpt3_gpio>;
+
+	gpio-line-names = "", "GPIO18", "", "GPIO3",
+			  "GPIO2", "GPIO21", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "GPIO5", "GPIO6",
+			  "", "", "GPIO11", "GPIO10",
+			  "GPIO9", "GPIO7", "", "GPIO4",
+			  "", "", "", "";
+};
+
+&gpt1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpt1>;
+	status = "disabled";
+};
+
+&gpt2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpt2>;
+	status = "disabled";
+};
+
+&gpt3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpt3>;
+	status = "disabled";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+/* X5 + X6 Camera & Display interface */
+&i2c2 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* X1 ID_I2C */
+&i2c3 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio2 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio2 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tlv320aic3x04>;
+		reg = <0x18>;
+		clock-names = "mclk";
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1>;
+		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+		iov-supply = <&reg_vcc_3v3>;
+		ldoin-supply = <&reg_vcc_3v3>;
+	};
+};
+
+/* X1 I2C */
+&i2c5 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio5 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* X1 I2C on GPIO24/GPIO25 */
+&i2c6 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	scl-gpios = <&gpio2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio2 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pcf85063 {
+	/* RTC_EVENT# is connected on MBa8MP-RAS314 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio3>;
+	interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&reg_usdhc2_vqmmc {
+	status = "okay";
+};
+
+&sai5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* X1 UART1 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	assigned-clocks = <&clk IMX8MP_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart4 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_0 {
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_vcc_5v0>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_vcc_5v0>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbhub>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+};
+
+/* X1 SD card on GPIO22-GPIO27 */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	disable-wp;
+	bus-width = <4>;
+	status = "disabled";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x14>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK		0x140>,
+			   <MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI		0x140>,
+			   <MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO		0x1c0>,
+			   <MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25		0x140>,
+			   <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x140>;
+	};
+
+	pinctrl_ecspi3_gpio: ecspi3gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22		0x80>,
+			   <MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23		0x80>,
+			   <MX8MP_IOMUXC_UART2_RXD__GPIO5_IO24		0x80>,
+			   <MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25		0x80>,
+			   <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x80>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x40000044>,
+			   <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO			0x40000044>,
+			   <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90>,
+			   <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90>,
+			   <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90>,
+			   <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90>,
+			   <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90>,
+			   <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90>,
+			   <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x12>,
+			   <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x12>,
+			   <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x12>,
+			   <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x12>,
+			   <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x12>,
+			   <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x14>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02				0x100>,
+			   <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03				0x1c0>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x40000044>,
+			   <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x40000044>,
+			   <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x90>,
+			   <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x90>,
+			   <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x90>,
+			   <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x90>,
+			   <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC	0x90>,
+			   <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90>,
+			   <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x14>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x100>,
+			   <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x1c0>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x14>,
+			   <MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x14>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x14>,
+			   <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x14>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__GPIO2_IO00		0x94>,
+			   <MX8MP_IOMUXC_SD1_CMD__GPIO2_IO01		0x94>,
+			   <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02		0x94>,
+			   <MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03		0x94>,
+			   <MX8MP_IOMUXC_SD1_DATA2__GPIO2_IO04		0x94>,
+			   <MX8MP_IOMUXC_SD1_DATA3__GPIO2_IO05		0x94>,
+			   <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x94>,
+			   <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x94>;
+	};
+
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x180>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20		0x80>,
+			   /* PCIE_WAKE# */
+			   <MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x180>,
+			   <MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26		0x94>,
+			   <MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x94>;
+	};
+
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01		0x80>,
+			   <MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05	0x80>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c2>,
+			   <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c2>,
+			   <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x40000010>,
+			   <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x40000154>;
+	};
+
+	pinctrl_gpt1: gpt1grp {
+		fsl,pins = <MX8MP_IOMUXC_UART3_TXD__GPT1_CLK		0x14>;
+	};
+
+	pinctrl_gpt1_gpio: gpt1gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27		0x80>;
+	};
+
+	pinctrl_gpt2: gpt2grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPT2_CLK		0x14>;
+	};
+
+	pinctrl_gpt2_gpio: gpt2gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x80>;
+	};
+
+	pinctrl_gpt3: gpt3grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__GPT3_CLK		0x14>;
+	};
+
+	pinctrl_gpt3_gpio: gpt3gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x80>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x400001e2>,
+			   <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x400001e2>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_RESET_B__I2C3_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_SD1_STROBE__I2C3_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10	0x400001e2>,
+			   <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x400001e2>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12	0x400001e2>,
+			   <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x400001e2>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03		0x400001e2>,
+			   <MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04		0x400001e2>;
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c6_gpio: i2c6-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02		0x400001e2>,
+			   <MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03		0x400001e2>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x80>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x60>,
+			   <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x94>;
+	};
+
+	pinctrl_lvdsdisplay: lvdsdisplaygrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x10>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT		0x14>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO14__PWM3_OUT		0x14>;
+	};
+
+	pinctrl_pwm3_gpio: pwm3grpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x80>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO15__PWM4_OUT		0x14>;
+	};
+
+	pinctrl_pwm4_gpio: pwm4grpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x80>;
+	};
+
+	pinctrl_rfkill: rfkillgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02		0x14>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK		0x94>,
+			   <MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI5_RX_DATA00	0x94>,
+			   <MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00	0x94>,
+			   <MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC	0x94>,
+			   <MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK	0x94>;
+	};
+
+	pinctrl_tlv320aic3x04: tlv320aic3x04grp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI2_MOSI__GPIO5_IO11		0x180>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX	0x14>,
+			   <MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX		0x14>,
+			   <MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS	0x14>,
+			   <MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS	0x14>;
+	};
+
+	pinctrl_uart1_gpio: uart1gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21		0x80>,
+			   <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x80>,
+			   <MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23		0x80>,
+			   <MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24		0x80>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_TXC__UART2_DCE_TX		0x14>,
+			   <MX8MP_IOMUXC_SAI3_TXFS__UART2_DCE_RX	0x14>,
+			   <MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS	0x14>,
+			   <MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS	0x14>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX	0x140>,
+			   <MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX	0x140>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140>,
+			   <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26		0x10>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x192>,
+			   <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d2>,
+			   <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d2>,
+			   <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d2>,
+			   <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d2>,
+			   <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d2>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x192>,
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>,
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>,
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso
new file mode 100644
index 000000000000..5058cd9409c7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+
+&{/} {
+	compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&display {
+	compatible = "auo,g133han01";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dual-lvds-odd-pixels;
+
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dual-lvds-even-pixels;
+
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+				 <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	assigned-clock-rates = <0>, <988400000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtso
new file mode 100644
index 000000000000..ea44d605342b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&display {
+	compatible = "tianma,tm070jvhg33";
+	status = "okay";
+
+	panel-timing {
+		clock-frequency = <74250000>;
+		hactive = <1280>;
+		vactive = <800>;
+		hfront-porch = <64>;
+		hback-porch = <5>;
+		hsync-len = <1>;
+		vfront-porch = <40>;
+		vback-porch = <2>;
+		vsync-len = <1>;
+		de-active = <1>;
+	};
+
+	port {
+		panel_in_lvds0: endpoint {
+			remote-endpoint = <&ldb_lvds_ch0>;
+		};
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index d8ca52976170..4eedd00d83b9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -8,12 +8,14 @@
 
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include <dt-bindings/pwm/pwm.h>
 #include "imx8mp-tqma8mpql.dtsi"
 
 / {
 	model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL";
 	compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+	chassis-type = "embedded";
 
 	chosen {
 		stdout-path = &uart4;
@@ -48,6 +50,42 @@
 		status = "disabled";
 	};
 
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X29";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon0>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwmfan>;
+		fan-supply = <&reg_pwm_fan>;
+		#cooling-cells = <2>;
+		/* typical 25 kHz -> 40.000 nsec */
+		pwms = <&pwm3 0 40000 PWM_POLARITY_INVERTED>;
+		cooling-levels = <0 32 64 128 196 240>;
+		pulses-per-revolution = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+		status = "disabled";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -57,13 +95,15 @@
 		switch-1 {
 			label = "S12";
 			linux,code = <BTN_0>;
-			gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 
 		switch-2 {
 			label = "S13";
 			linux,code = <BTN_1>;
-			gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
@@ -95,6 +135,18 @@
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X44";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	display: display {
 		/*
 		 * Display is not fixed, so compatible has to be added from
@@ -108,6 +160,18 @@
 		status = "disabled";
 	};
 
+	reg_pwm_fan: regulator-pwm-fan {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regpwmfan>;
+		regulator-name = "FAN_PWR";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vcc_12v0>;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -132,6 +196,13 @@
 		enable-active-high;
 	};
 
+	reg_vcc_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	reg_vcc_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
@@ -139,16 +210,18 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	reg_vcc_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
-		ocram: ocram@900000 {
-			no-map;
-			reg = <0 0x900000 0 0x70000>;
-		};
-
 		/* global autoconfigured region for contiguous allocations */
 		linux,cma {
 			compatible = "shared-dma-pool";
@@ -158,6 +231,55 @@
 			linux,cma-default;
 		};
 	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		audio-asrc = <&easrc>;
+		audio-cpu = <&sai3>;
+		audio-codec = <&tlv320aic3x04>;
+	};
+
+	thermal-zones {
+		soc-thermal {
+			trips {
+				soc_active0: trip-active0 {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+
+				soc_active1: trip-active1 {
+					temperature = <48000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+
+				soc_active2: trip-active2 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&soc_active0>;
+					cooling-device = <&fan0 1 1>;
+				};
+
+				map2 {
+					trip = <&soc_active1>;
+					cooling-device = <&fan0 2 2>;
+				};
+
+				map3 {
+					trip = <&soc_active2>;
+					cooling-device = <&fan0 3 3>;
+				};
+			};
+		};
+	};
 };
 
 &ecspi1 {
@@ -333,9 +455,16 @@
 			  "", "", "", "",
 			  "", "", "", "",
 			  "", "", "DP_IRQ", "DSI_EN",
-			  "HDMI_OC#", "TEMP_EVENT#", "PCIE_CLK_OE#", "",
+			  "HDMI_OC#", "TEMP_EVENT#", "PCIE_REFCLK_OE#", "",
 			  "", "", "", "FAN_PWR",
 			  "RTC_EVENT#", "CODEC_RST#", "", "";
+
+	pcie-refclkreq-hog {
+		gpio-hog;
+		gpios = <22 0>;
+		output-high;
+		line-name = "PCIE_REFCLK_OE#";
+	};
 };
 
 &gpio5 {
@@ -349,6 +478,28 @@
 			  "", "", "", "";
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 &i2c2 {
 	clock-frequency = <384000>;
 	pinctrl-names = "default", "gpio";
@@ -358,9 +509,20 @@
 	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	se97_1c: temperature-sensor-eeprom@1c {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tlv320aic3x04>;
+		reg = <0x18>;
+		clock-names = "mclk";
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		iov-supply = <&reg_vcc_1v8>;
+		ldoin-supply = <&reg_vcc_3v3>;
+	};
+
+	se97_1c: temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1c>;
 	};
 
@@ -370,6 +532,13 @@
 		pagesize = <16>;
 		vcc-supply = <&reg_vcc_3v3>;
 	};
+
+	pcieclk: clock-generator@6a {
+		compatible = "renesas,9fgv0241";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
 };
 
 &i2c4 {
@@ -392,12 +561,37 @@
 	status = "okay";
 };
 
+&lcdif3 {
+	status = "okay";
+};
+
 &pcf85063 {
 	/* RTC_EVENT# is connected on MBa8MPxL */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
 	interrupt-parent = <&gpio4>;
 	interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
 };
 
+&pcie_phy {
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	clocks = <&pcieclk 0>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+		 <&clk IMX8MP_CLK_HSIO_AXI>,
+		 <&clk IMX8MP_CLK_PCIE_ROOT>;
+	clock-names = "pcie", "pcie_bus", "pcie_aux";
+	assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+	assigned-clock-rates = <10000000>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+	status = "okay";
+};
+
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
@@ -410,6 +604,20 @@
 	status = "okay";
 };
 
+&reg_usdhc2_vqmmc {
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -445,6 +653,71 @@
 	status = "okay";
 };
 
+&usb3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0>;
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_vcc_5v0>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_vcc_5v0>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented, but not a full featured OTG */
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbhub>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+};
+
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
@@ -630,6 +903,10 @@
 		fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x10>; /* Power enable */
 	};
 
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x80>;
+	};
+
 	/* LVDS Backlight */
 	pinctrl_pwm2: pwm2grp {
 		fsl,pins = <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT		0x14>;
@@ -640,10 +917,35 @@
 		fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT		0x14>;
 	};
 
+	pinctrl_pwmfan: pwmfangrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x80>; /* FAN RPM */
+	};
+
 	pinctrl_reg12v0: reg12v0grp {
 		fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x140>; /* VCC12V enable */
 	};
 
+	pinctrl_regpwmfan: regpwmfangrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x80>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0x94
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0x94
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0x94
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0x94
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0x94
+		>;
+	};
+
+	pinctrl_tlv320aic3x04: tlv320aic3x04grp {
+		fsl,pins = <
+			/* CODEC RST# */
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29		0x180
+		>;
+	};
+
 	/* X61 */
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX		0x140>,
@@ -666,14 +968,26 @@
 			   <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140>;
 	};
 
+	pinctrl_usb0: usb0grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x1c0>,
+			   <MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR	0x1c0>;
+	};
+
+	pinctrl_usbcon0: usb0congrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x1c0>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11		0x10>;
+	};
+
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x192>,
 			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d2>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
@@ -682,8 +996,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
@@ -692,8 +1005,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
index 7bd680a926ce..9716f24f7c6e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
@@ -1,7 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2021-2022 TQ-Systems GmbH
- * Author: Alexander Stein <alexander.stein@tq-group.com>
+ * Copyright 2021-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
  */
 
 #include "imx8mp.dtsi"
@@ -15,22 +16,18 @@
 		reg = <0x0 0x40000000 0 0x80000000>;
 	};
 
-	/* identical to buck4_reg, but should never change */
-	reg_vcc3v3: regulator-vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	/* e-MMC IO, needed for HS modes */
-	reg_vcc1v8: regulator-vcc1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC1V8";
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vqmmc>;
+		regulator-name = "V_SD2";
 		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		vin-supply = <&ldo5_reg>;
+		status = "disabled";
 	};
 };
 
@@ -38,6 +35,10 @@
 	cpu-supply = <&buck2_reg>;
 };
 
+&easrc {
+	status = "okay";
+};
+
 &flexspi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexspi0>;
@@ -45,12 +46,17 @@
 
 	flash0: flash@0 {
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <80000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+		vcc-supply = <&buck5_reg>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
@@ -63,9 +69,8 @@
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	se97: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	se97: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 
@@ -173,17 +178,21 @@
 		read-only;
 		reg = <0x53>;
 		pagesize = <16>;
-		vcc-supply = <&reg_vcc3v3>;
+		vcc-supply = <&buck4_reg>;
 	};
 
 	m24c64: eeprom@57 {
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 		pagesize = <32>;
-		vcc-supply = <&reg_vcc3v3>;
+		vcc-supply = <&buck4_reg>;
 	};
 };
 
+&usdhc2 {
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
+};
+
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
@@ -193,8 +202,8 @@
 	non-removable;
 	no-sd;
 	no-sdio;
-	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc1v8>;
+	vmmc-supply = <&buck4_reg>;
+	vqmmc-supply = <&buck5_reg>;
 	status = "okay";
 };
 
@@ -233,6 +242,10 @@
 		fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x10>;
 	};
 
+	pinctrl_reg_usdhc2_vqmmc: regusdhc2vqmmcgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04		0xc0>;
+	};
+
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
 			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso
new file mode 100644
index 000000000000..e3965caca6be
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2025 GOcontroll B.V.
+ * Author: Maud Spierings <maudspierings@gocontroll.com>
+ */
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mp-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	model = "GOcontroll Moduline Display with BOE av101hdt-a10 display";
+
+	panel {
+		compatible = "boe,av101hdt-a10";
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pinctrl_panel>;
+		pinctrl-names = "default";
+		power-supply = <&reg_3v3_per>;
+		reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+
+		port {
+			panel_lvds_in: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+
+	reg_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		power-supply = <&reg_6v4>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-c-vbus";
+	};
+};
+
+&iomuxc {
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07
+				MX8MP_DSE_X1
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09
+				MX8MP_DSE_X1
+		>;
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>;
+	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */
+	assigned-clock-rates = <0>, <1054620000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_lvds_in>;
+			};
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+
+	connector {
+		compatible = "usb-c-connector";
+		data-role = "host";
+		pd-disable;
+		vbus-supply = <&reg_vbus>;
+
+		port {
+			high_speed_ep: endpoint {
+				remote-endpoint = <&usb1_hs_ep>;
+			};
+		};
+	};
+
+	port {
+		usb1_hs_ep: endpoint {
+			remote-endpoint = <&high_speed_ep>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso
new file mode 100644
index 000000000000..3eb665ce9d5d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2025 GOcontroll B.V.
+ * Author: Maud Spierings <maudspierings@gocontroll.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mp-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	model = "GOcontroll Moduline Display with BOE av123z7m-n17 display";
+
+	panel {
+		compatible = "boe,av123z7m-n17";
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pinctrl_panel>;
+		pinctrl-names = "default";
+		power-supply = <&reg_3v3_per>;
+		reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				dual-lvds-odd-pixels;
+
+				panel_in0: endpoint {
+					remote-endpoint = <&lvds1_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				dual-lvds-even-pixels;
+
+				panel_in1: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* sn65dsi85 */
+	bridge@2d {
+		compatible = "ti,sn65dsi84";
+		reg = <0x2d>;
+		enable-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pinctrl_lvds_bridge>;
+		pinctrl-names = "default";
+		vcc-supply = <&reg_1v8_per>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				dsi_lvds_bridge_in: endpoint {
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&mipi_dsi_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lvds0_out: endpoint {
+					remote-endpoint = <&panel_in1>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				lvds1_out: endpoint {
+					remote-endpoint = <&panel_in0>;
+				};
+			};
+		};
+	};
+
+	/* max25014 @ 0x6f */
+};
+
+&iomuxc {
+	pinctrl_lvds_bridge: lvdsbridgegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14
+				MX8MP_DSE_X1
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07
+				MX8MP_DSE_X1
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09
+				MX8MP_DSE_X1
+		>;
+	};
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&mipi_dsi {
+	/*
+	 * burst has to be at least 2x dsi clock that the sn65dsi85 expects
+	 * display pixelclock * bpp / lanes / 2 = dsi clock
+	 * 88.000.000 * 24 / 4 / 2 = 264.000.000
+	 * range gets rounded up to 265.000.000 - 270.000.000
+	 * 267.500.000 * 2 = 535.000.000
+	 */
+	samsung,burst-clock-frequency = <535000000>;
+	samsung,esc-clock-frequency = <12000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			mipi_dsi_out: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = < &dsi_lvds_bridge_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
new file mode 100644
index 000000000000..88ad422c2760
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
@@ -0,0 +1,525 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2025 GOcontroll B.V.
+ * Author: Maud Spierings <maudspierings@gocontroll.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-tx8p-ml81.dtsi"
+
+/ {
+	compatible = "gocontroll,moduline-display", "fsl,imx8mp";
+	chassis-type = "embedded";
+	hardware = "Moduline Display V1.06";
+	model = "GOcontroll Moduline Display baseboard";
+
+	aliases {
+		can0 = &flexcan1;
+		can1 = &flexcan2;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		rtc0 = &rtc_pcf; /* i2c rtc is the main rtc */
+		rtc1 = &snvs_rtc;
+		spi0 = &ecspi2; /* spidev number compatibility */
+		spi1 = &ecspi1; /* spidev number compatibility */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	external-sensor-supply {
+		compatible = "regulator-output";
+		vout-supply = <&reg_5v0_sensor>;
+	};
+
+	flexcan1_phy: can-phy0 {
+		compatible = "ti,tcan1051", "ti,tcan1042";
+		#phy-cells = <0>;
+		pinctrl-0 = <&pinctrl_flexcan1_stby>;
+		pinctrl-names = "default";
+		max-bitrate = <5000000>;
+		standby-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	flexcan2_phy: can-phy1 {
+		compatible = "ti,tcan1051", "ti,tcan1042";
+		#phy-cells = <0>;
+		pinctrl-0 = <&pinctrl_flexcan2_stby>;
+		pinctrl-names = "default";
+		max-bitrate = <5000000>;
+		standby-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_1v8_per: regulator-1v8-per {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&pinctrl_reg_1v8>;
+		pinctrl-names = "default";
+		power-supply = <&reg_3v3_per>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "1v8-per";
+		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_3v3_per: regulator-3v3-per {
+		compatible = "regulator-fixed";
+		power-supply = <&reg_6v4>;
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3-per";
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		power-supply = <&reg_6v4>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "5v0";
+	};
+
+	reg_5v0_sensor: regulator-5v0-sensor {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&pinctrl_reg_5v0_sensor>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "5v0-supply-external-sensor";
+		gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_6v4: regulator-6v4 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <6400000>;
+		regulator-min-microvolt = <6400000>;
+		regulator-name = "6v4";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,name = "tas2505-audio";
+		simple-audio-card,routing = "Speaker", "DAC";
+		simple-audio-card,widgets = "Speaker", "Speaker External";
+
+		simple-audio-card,codec {
+			sound-dai = <&tas2505>;
+		};
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai6>;
+		};
+	};
+
+	wifi_powerseq: wifi-powerseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-0 = <&pinctrl_wl_reg>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <500000>;
+		reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>,
+		   <&gpio1 11 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	connector@0 {
+		compatible = "gocontroll,moduline-module-slot";
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		i2c-bus = <&i2c2>;
+		reset-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+		slot-number = <1>;
+		spi-max-frequency = <54000000>;
+		sync-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		vddhpp-supply = <&reg_6v4>;
+		vddp-supply = <&reg_5v0>;
+		vdd-supply = <&reg_3v3_per>;
+	};
+
+	connector@1 {
+		compatible = "gocontroll,moduline-module-slot";
+		reg = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		i2c-bus = <&i2c2>;
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		slot-number = <2>;
+		spi-max-frequency = <54000000>;
+		sync-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		vddhpp-supply = <&reg_6v4>;
+		vddp-supply = <&reg_5v0>;
+		vdd-supply = <&reg_3v3_per>;
+	};
+
+	adc@2 {
+		compatible = "microchip,mcp3004";
+		reg = <2>;
+		spi-max-frequency = <2300000>;
+		vref-supply = <&reg_vdd_3v3>;
+	};
+};
+
+&flexcan1 {
+	phys = <&flexcan1_phy>;
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&flexcan2 {
+	phys = <&flexcan2_phy>;
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	tas2505: audio-codec@18 {
+		compatible = "ti,tas2505";
+		reg = <0x18>;
+		clocks = <&clk IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+		aic32x4-gpio-func = <0xff 0xff 0xff 0xff 0xff>;
+		av-supply = <&reg_1v8_per>;
+		dv-supply = <&reg_1v8_per>;
+		iov-supply = <&reg_vdd_3v3>;
+		pinctrl-0 = <&pinctrl_tas_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	};
+
+	rtc_pcf: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+
+		clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_bt: btgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14
+				MX8MP_DSE_X1
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE | MX8MP_HYS_SCHMITT)
+			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15
+				MX8MP_DSE_X1
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI
+				MX8MP_DSE_X4
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO
+				(MX8MP_DSE_X4 | MX8MP_HYS_SCHMITT)
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK
+				MX8MP_DSE_X4
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12
+				MX8MP_DSE_X1
+			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11
+				MX8MP_DSE_X1
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10
+				MX8MP_DSE_X1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			 MX8MP_IOMUXC_SPDIF_RX__CAN1_RX
+				 (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			 MX8MP_IOMUXC_SPDIF_TX__CAN1_TX
+				 (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_flexcan1_stby: flexcan1stbygrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_TXD__CAN2_RX
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_UART3_RXD__CAN2_TX
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_flexcan2_stby: flexcan2stbygrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL
+				MX8MP_I2C_DEFAULT
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA
+				MX8MP_I2C_DEFAULT
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16
+				MX8MP_I2C_DEFAULT
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17
+				MX8MP_I2C_DEFAULT
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL
+				MX8MP_I2C_DEFAULT
+			MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA
+				MX8MP_I2C_DEFAULT
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12
+				MX8MP_I2C_DEFAULT
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13
+				MX8MP_I2C_DEFAULT
+		>;
+	};
+
+	pinctrl_usdhc2: pinctrlusdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+		>;
+	};
+
+	pinctrl_reg_1v8: reg-1v8-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25
+				MX8MP_DSE_X1
+		>;
+	};
+
+	pinctrl_reg_5v0_sensor: reg-5v0-sensorgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09
+				MX8MP_DSE_X1
+		>;
+	};
+
+	pinctrl_sai6: sai6grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_TX_SYNC
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+			MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_TX_BCLK
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+			MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_TX_DATA00
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+			MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI6_MCLK
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+			MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_RX_DATA00
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+		>;
+	};
+
+	pinctrl_tas_reset: tasresetgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24
+				MX8MP_DSE_X1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B
+				(MX8MP_DSE_X6 | MX8MP_HYS_SCHMITT)
+		>;
+	};
+
+	pinctrl_wl_int: wlintgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13
+				(MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_wl_reg: wlreggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19
+				MX8MP_DSE_X1
+		>;
+	};
+};
+
+&sai6 {
+	assigned-clocks = <&clk IMX8MP_CLK_SAI6>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	pinctrl-0 = <&pinctrl_sai6>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "infineon,cyw43439-bt", "brcm,bcm4329-bt";
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wakeup";
+		device-wakeup-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		max-speed = <921600>;
+		pinctrl-0 = <&pinctrl_bt>;
+		pinctrl-names = "default";
+		shutdown-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&reg_3v3_per>;
+		vddio-supply = <&reg_3v3_per>;
+	};
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "peripheral";
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <50000000>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	max-frequency = <50000000>;
+	mmc-pwrseq = <&wifi_powerseq>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default";
+	sd-uhs-sdr25;
+	vmmc-supply = <&reg_3v3_per>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "infineon,cyw43439-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+		pinctrl-0 = <&pinctrl_wl_int>;
+		pinctrl-names = "default";
+		brcm,board-type = "GOcontroll,moduline";
+	};
+};
+
+&wdog1 {
+	pinctrl-0 = <&pinctrl_wdog>;
+	pinctrl-names = "default";
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi
new file mode 100644
index 000000000000..fe8ba16eb40e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi
@@ -0,0 +1,548 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2020 Lothar Waßmann <LW@KARO-electronics.de>
+ * 2025 Maud Spierings <maudspierings@gocontroll.com>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	/* PHY regulator */
+	regulator-3v3-etn {
+		compatible = "regulator-fixed";
+		gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&pinctrl_reg_3v3_etn>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3-etn";
+		vin-supply = <&reg_vdd_3v3>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&eqos {
+	assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
+			  <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+			  <&clk IMX8MP_CLK_ENET_QOS>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+				 <&clk IMX8MP_SYS_PLL2_100M>,
+				 <&clk IMX8MP_SYS_PLL2_50M>;
+	assigned-clock-rates = <266000000>, <100000000>, <50000000>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-1 = <&pinctrl_eqos_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pinctrl_ethphy_rst_b>;
+		pinctrl-names = "default";
+		reset-delay-us = <25000>;
+		reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clk IMX8MP_CLK_ENET_QOS>;
+			pinctrl-0 = <&pinctrl_ethphy_int_b>;
+			pinctrl-names = "default";
+			smsc,disable-energy-detect;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_152",
+			  "SODIMM_42",
+			  "PMIC_WDOG_B SODIMM_153",
+			  "PMIC_IRQ_B",
+			  "SODIMM_154",
+			  "SODIMM_155",
+			  "SODIMM_156",
+			  "SODIMM_157",
+			  "SODIMM_158",
+			  "SODIMM_159",
+			  "SODIMM_161",
+			  "SODIMM_162",
+			  "SODIMM_34",
+			  "SODIMM_36",
+			  "SODIMM_27",
+			  "SODIMM_28",
+			  "ENET_MDC",
+			  "ENET_MDIO",
+			  "",
+			  "ENET_XTAL1/CLKIN",
+			  "ENET_TXD1",
+			  "ENET_TXD0",
+			  "ENET_TXEN",
+			  "ENET_POWER",
+			  "ENET_COL/CRS_DV",
+			  "ENET_RXER",
+			  "ENET_RXD0",
+			  "ENET_RXD1",
+			  "",
+			  "",
+			  "",
+			  "";
+};
+
+&gpio2 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_51",
+			  "SODIMM_57",
+			  "SODIMM_56",
+			  "SODIMM_52",
+			  "SODIMM_53",
+			  "SODIMM_54",
+			  "SODIMM_55",
+			  "SODIMM_15",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "";
+};
+
+&gpio3 {
+	gpio-line-names = "",
+			  "",
+			  "EMMC_DS",
+			  "EMMC_DAT5",
+			  "EMMC_DAT6",
+			  "EMMC_DAT7",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EMMC_DAT0",
+			  "EMMC_DAT1",
+			  "EMMC_DAT2",
+			  "EMMC_DAT3",
+			  "",
+			  "EMMC_DAT4",
+			  "",
+			  "EMMC_CLK",
+			  "EMMC_CMD",
+			  "SODIMM_75",
+			  "SODIMM_145",
+			  "SODIMM_163",
+			  "SODIMM_164",
+			  "SODIMM_165",
+			  "SODIMM_143",
+			  "SODIMM_144",
+			  "SODIMM_72",
+			  "SODIMM_73",
+			  "SODIMM_74",
+			  "SODIMM_93",
+			  "",
+			  "";
+};
+
+&gpio4 {
+	gpio-line-names = "SODIMM_98",
+			  "SODIMM_99",
+			  "SODIMM_100",
+			  "SODIMM_101",
+			  "SODIMM_45",
+			  "SODIMM_43",
+			  "SODIMM_105",
+			  "SODIMM_106",
+			  "SODIMM_107",
+			  "SODIMM_108",
+			  "SODIMM_104",
+			  "SODIMM_103",
+			  "SODIMM_115",
+			  "SODIMM_114",
+			  "SODIMM_113",
+			  "SODIMM_112",
+			  "SODIMM_109",
+			  "SODIMM_110",
+			  "SODIMM_95",
+			  "SODIMM_96",
+			  "SODIMM_97",
+			  "ENET_nINT",
+			  "ENET_nRST",
+			  "SODIMM_84",
+			  "SODIMM_87",
+			  "SODIMM_86",
+			  "SODIMM_85",
+			  "SODIMM_83",
+			  "",
+			  "SODIMM_66",
+			  "SODIMM_65",
+			  "";
+};
+
+&gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_81",
+			  "SODIMM_146",
+			  "SODIMM_48",
+			  "SODIMM_46",
+			  "SODIMM_47",
+			  "SODIMM_44",
+			  "SODIMM_49",
+			  "",
+			  "SODIMM_70",
+			  "SODIMM_69",
+			  "PMIC_SCL",
+			  "PMIC_SDA",
+			  "SODIMM_41",
+			  "SODIMM_40",
+			  "SODIMM_148",
+			  "SODIMM_149",
+			  "SODIMM_150",
+			  "SODIMM_151",
+			  "SODIMM_60",
+			  "SODIMM_59",
+			  "SODIMM_64",
+			  "SODIMM_63",
+			  "SODIMM_62",
+			  "SODIMM_61",
+			  "SODIMM_68",
+			  "SODIMM_67",
+			  "",
+			  "";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "vdd-soc";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <950000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "vdd-core";
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "3v3";
+			};
+
+			reg_nvcc_nand: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "nvcc-nand";
+			};
+
+			reg_nvcc_dram: BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+				regulator-name = "nvcc-dram";
+			};
+
+			reg_snvs_1v8: LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "snvs-1v8";
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-always-on;
+				regulator-max-microvolt = <1150000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "LDO2";
+			};
+
+			reg_vdda_1v8: LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vdda-1v8";
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "LDO4";
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "LDO5";
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK
+				(MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE | MX8MP_SION)
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC
+				(MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO
+				(MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST)
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST)
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0
+				(MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1
+				(MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER
+				(MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST)
+		>;
+	};
+
+	pinctrl_eqos_sleep: eqos-sleep-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_TD2__GPIO1_IO19
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_MDC__GPIO1_IO16
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_MDIO__GPIO1_IO17
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_TD0__GPIO1_IO21
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_TD1__GPIO1_IO20
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_TX_CTL__GPIO1_IO22
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_ethphy_int_b: ethphy-int-bgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21
+				(MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+		>;
+	};
+
+	pinctrl_ethphy_rst_b: ethphy-rst-bgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL
+				MX8MP_I2C_DEFAULT
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA
+				MX8MP_I2C_DEFAULT
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14
+				MX8MP_I2C_DEFAULT
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15
+				MX8MP_I2C_DEFAULT
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03
+				(MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_reg_3v3_etn: reg-3v3-etngrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_TXC__GPIO1_IO23
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK
+				(MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE
+				(MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+		>;
+	};
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <200000000>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	vmmc-supply = <&reg_vdd_3v3>;
+	voltage-ranges = <3300 3300>;
+	vqmmc-supply = <&reg_nvcc_nand>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts
new file mode 100644
index 000000000000..9ecec1a41878
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts
@@ -0,0 +1,907 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Ultratronik
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "NXP i.MX8MPlus Ultratronik MMI_A53 board";
+	compatible = "ultratronik,imx8mp-ultra-mach-sbc", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		rtc0 = &hwrtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-sbu-mux {
+		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sbu_mux>;
+		select-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		orientation-switch;
+
+		port {
+			usb3_data_ss: endpoint {
+				remote-endpoint = <&typec_con_ss>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; /* Wakeup */
+			label = "Wakeup";
+			linux,code = <KEY_WAKEUP>;
+			pinctrl-0 = <&pinctrl_gpio_key_wakeup>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led1 {
+			label = "red";
+			gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "green";
+			gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "yellow";
+			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_usba_vbus: regulator-usba-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1>;
+		regulator-name = "usb-A-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	slb9670: tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <32000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_slb9670>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		<&gpio1 8 GPIO_ACTIVE_LOW>,
+		<&gpio1 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	nfc-transceiver@1 {
+		compatible = "st,st95hf";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nfc>;
+		spi-max-frequency = <100000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		enable-gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x2>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"#TPM_IRQ", "GPIO1", "", "#PMIC_INT",
+		"SD2_VSEL", "#TOUCH_IRQ", "#NFC_INT_I", "#NFC_INT",
+		"#SPI2_CS2", "#SPI2_CS3", "#RTS4", "",
+		"USB_PWR", "GPIO2", "GPIO3", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "#SD2_CD", "", "", "",
+		"", "", "", "", "#USB-C_EN", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "DISP_POW", "GPIO4",
+		"#", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"BKL_POW", "#ETH1_INT", "#TPM_RES", "#PCAP_RES",
+		"", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "#ETH0_INT", "#USB-C_ALERT",
+		"#USB-C_SEL", "", "", "",
+		"LED_RED", "LED_GREEN", "LED_YELLOW", "#WAKEUP",
+		"", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "#SPI1_CS", "", "", "", "#SPI2_CS1", "", "",
+		"", "", "", "", "ENA_KAM", "ENA_LED", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 GPIO_ACTIVE_LOW>;
+
+		/*
+		 * i.MX 8M Plus Data Sheet for Consumer Products
+		 * 3.1.4 Operating ranges
+		 * MIMX8ML8DVNLZAB
+		 */
+		regulators {
+			buck1: BUCK1 {	/* VDD_SOC (dual-phase with BUCK3) */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {	/* VDD_ARM */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {	/* +3V3 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5: BUCK5 {	/* +1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6: BUCK6 {	/* DRAM_1V1 */
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo1: LDO1 {	/* NVCC_SNVS_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo3: LDO3 {	/* VDDA_1P8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4: LDO4 {	/* ENET_2V5 */
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo5: LDO5 {	/* NVCC_SD2 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	crypto@35 {
+		compatible = "atmel,atecc508a";
+		reg = <0x35>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	hwrtc: rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+		epson,vdet-disable;
+		trickle-diode-disable;
+	};
+
+	tcpc@52 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ptn5110>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 5000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_dr_sw: endpoint {
+						remote-endpoint = <&usb3_drd_sw>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c5 {	/* HDMI EDID bus */
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	/* system console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	/* expansion port serial connection */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb3_drd_sw: endpoint {
+			remote-endpoint = <&typec_dr_sw>;
+		};
+	};
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usba_vbus>;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	snps,hsphy_interface = "utmi";
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi1_cs: ecspi1-cs-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x40	/* #SPI1_CS */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x82
+		>;
+	};
+
+	pinctrl_ecspi2_cs: ecspi2-cs-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x40	/* #SPI2_CS */
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x40	/* #SPI2_CS2 */
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x40	/* #SPI2_CS3 */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82
+		>;
+	};
+
+	pinctrl_eqos: eqos-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x0
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x0
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x10	/* #ETH0_INT */
+		>;
+	};
+
+	pinctrl_fec: fec-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC               0x0
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO              0x0
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0         0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1         0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2         0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3         0x90
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC          0x90
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL      0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0         0x16
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1         0x16
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2         0x16
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3         0x16
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL      0x16
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC         0x16
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01               0x10	/* #ETH1_INT */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX			0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX			0x154
+		>;
+	};
+
+	pinctrl_gpio_key_wakeup: gpio-key-wakeup-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x40	/* #WAKEUP */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpio-leds-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24		0x40	/* LED_RED */
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x40	/* LED_GREEN */
+			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26		0x40	/* LED_YELLOW */
+		>;
+	};
+
+	pinctrl_hdmi: hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x154
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x154
+		>;
+	};
+
+	pinctrl_hog: hog-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01	0x40	/* GPIO1 */
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x40	/* GPIO2 */
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14	0x40	/* GPIO3 */
+			MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23	0x40	/* GPIO4 */
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20	0x40	/* ENA_KAM */
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x40	/* ENA_LED */
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x40	/* #PCAP_RES */
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x40	/* #RTS4 */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c0
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x400001c0
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0xc0
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0xc0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL			0x400001c0
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA			0x400001c0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0xc0
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0xc0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0xc2
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0xc2
+		>;
+	};
+
+	pinctrl_i2c5: i2c5-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL		0x400000c4
+			MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA		0x400000c4
+		>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26		0xc4
+			MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27		0xc4
+		>;
+	};
+
+	pinctrl_nfc: nfc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x40	/* NFC_INT_I */
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x40	/* NFC_INT */
+		>;
+	};
+
+	pinctrl_pmic: pmic-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x40	/* #PMIC_INT */
+		>;
+	};
+
+	pinctrl_ptn5110: ptn5110-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x1c4	/* #USB-C_ALERT */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT		0x116
+		>;
+	};
+
+	pinctrl_pwm2: pwm2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT		0x116	/* EXT_PWM */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: reg-usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_sbu_mux: sbu-mux-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20		0x16	/* #USB-C_SEL */
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20			0x16	/* #USB-C_EN */
+		>;
+	};
+
+	pinctrl_slb9670: slb9670-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x40	/* #TPM_IRQ */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x40	/* #TPM_RES */
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x40
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x40
+		>;
+	};
+
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x40
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x40
+		>;
+	};
+
+	pinctrl_uart4: uart4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x40
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x40
+		>;
+	};
+
+	pinctrl_usb1: usb1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x40	/* USB_PWR */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0	/* SD2_VSEL */
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0	/* SD2_VSEL */
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0	/* SD2_VSEL */
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x40	/* #SD3_RESET */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x192
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d2
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d2
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d2
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d2
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d2
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d2
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d2
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d2
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d2
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x192
+		>;
+	};
+
+	pinctrl_wdog: wdog-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0xc6	/* #WDOG */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
new file mode 100644
index 000000000000..36d3eb865202
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 Variscite Ltd.
+ */
+
+#include "imx8mp-var-som.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-MX8M-PLUS on Symphony-Board";
+	compatible = "variscite,var-som-mx8mp-symphony", "variscite,var-som-mx8mp", "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
new file mode 100644
index 000000000000..29f080904482
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 Variscite Ltd.
+ *
+ * Author: Tarang Raval <tarang.raval@siliconsignals.io>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-MX8M Plus module";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-leds {
+	        compatible = "gpio-leds";
+
+	        led-0 {
+	                function = LED_FUNCTION_POWER;
+	                gpios = <&pca9534 0 GPIO_ACTIVE_HIGH>;
+	                linux,default-trigger = "heartbeat";
+	        };
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+	        compatible = "regulator-fixed";
+	        regulator-name = "VSD_3V3";
+	        regulator-min-microvolt = <3300000>;
+	        regulator-max-microvolt = <3300000>;
+	        gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+	        enable-active-high;
+	        startup-delay-us = <100>;
+	        off-on-delay-us = <12000>;
+	};
+
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		regulator-name = "VSD_VSEL";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		states = <3300000 0x0 1800000 0x1>;
+		vin-supply = <&ldo5>;
+	};
+
+	reg_phy_supply: regulator-phy-supply {
+		compatible = "regulator-fixed";
+		regulator-name = "phy-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <20000>;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_phy_vddio: regulator-phy-vddio {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	/*
+	 * The required RGMII TX and RX 2ns delays are implemented directly
+	 * in hardware via passive delay elements on the SOM PCB.
+	 * No delay configuration is needed in software via PHY driver.
+	 */
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <100000>;
+			vddio-supply = <&reg_phy_vddio>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_YELLOW>;
+					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "netdev";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "netdev";
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+        clock-frequency = <400000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2c3>;
+        status = "okay";
+
+	/* GPIO expander */
+	pca9534: gpio@20 {
+	        compatible = "nxp,pca9534";
+	        reg = <0x20>;
+	        pinctrl-names = "default";
+	        pinctrl-0 = <&pinctrl_pca9534>;
+	        gpio-controller;
+	        #gpio-cells = <2>;
+	        interrupt-parent = <&gpio1>;
+	        interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+	        wakeup-source;
+
+	        usb3-sata-sel-hog {
+	                gpio-hog;
+	                gpios = <4 0>;
+	                output-low;
+	                line-name = "usb3_sata_sel";
+	        };
+	};
+};
+
+/* Console */
+&uart2 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_uart2>;
+        status = "okay";
+};
+
+/* SD-card */
+&usdhc2 {
+        pinctrl-names = "default", "state_100mhz", "state_200mhz";
+        pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+        pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+        pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+        cd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+        vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
+        bus-width = <4>;
+        status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20					0x10
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10				0x150
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA4__I2C1_SCL				0x400001c2
+			MX8MP_IOMUXC_SD1_DATA5__I2C1_SDA				0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+	        fsl,pins = <
+	                MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL                                 0x400001c2
+	                MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA                                 0x400001c2
+	        >;
+	};
+
+	pinctrl_pca9534: pca9534grp {
+	        fsl,pins = <
+	                MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15                             0xc0
+	        >;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04				0x1c0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+	        fsl,pins = <
+		        MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX                            0x40
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX                            0x40
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+	        fsl,pins = <
+	                MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14                             0x1c4
+	                MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22                               0x10
+	                MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12                               0xc0
+	        >;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+	        fsl,pins = <
+	                MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                                0x190
+	                MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                                0x1d0
+	                MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0                            0x1d0
+	                MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1                            0x1d0
+	                MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2                            0x1d0
+	                MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                            0x1d0
+	        >;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+	        fsl,pins = <
+	                MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                                0x194
+	                MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                                0x1d4
+	                MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0                            0x1d4
+	                MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1                            0x1d4
+	                MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2                            0x1d4
+	                MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                            0x1d4
+	        >;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+	        fsl,pins = <
+	                MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                                0x196
+	                MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                                0x1d6
+	                MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0                            0x1d6
+	                MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1                            0x1d6
+	                MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2                            0x1d6
+	                MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                            0x1d6
+	        >;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B				0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
new file mode 100644
index 000000000000..cbf0c9a740fa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
@@ -0,0 +1,611 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	aliases {
+		ethernet0 = &eqos;
+		rtc0 = &gsc_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-user-pb {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		key-tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			pinctrl-names = "default";
+			reg = <0x0>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_AMBER>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@2 {
+					reg = <2>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@16 {
+				gw,mode = <4>;
+				reg = <0x16>;
+				label = "fan_tach";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_adc1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_adc2";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_1p0";
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_1p8";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_2p5";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_dram";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_soc";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_arm";
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+
+		fan-controller@0 {
+			compatible = "gw,gsc-fan";
+			reg = <0x0a>;
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gsc_rtc: rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+
+	pmic@69 {
+		compatible = "mps,mp5416";
+		reg = <0x69>;
+
+		regulators {
+			/* vdd_soc */
+			buck1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* vdd_dram */
+			buck2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* vdd_arm */
+			buck3_reg: buck3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* vdd_1p8 */
+			buck4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* OUT2: nvcc_snvs_1p8 */
+			ldo1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* OUT3: vdd_1p0 */
+			ldo2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* OUT4: vdd_2p5 */
+			ldo3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* OUT5: vdd_3p3 */
+			ldo4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+/* off-board header */
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c32";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* off-board header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* off-board header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* off-board */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC			0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO			0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0		0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1		0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2		0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3		0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+		>;
+	};
+
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x140 /* RST# */
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x150 /* IRQ# */
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x150 /* IRQ# */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x400001c2
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x166
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx-2x.dts
new file mode 100644
index 000000000000..53120fc9cd7f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx-2x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include "imx8mp-venice-gw702x.dtsi"
+#include "imx8mp-venice-gw71xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW71xx-2x i.MX8MP Development Kit";
+	compatible = "gateworks,imx8mp-gw71xx-2x", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
new file mode 100644
index 000000000000..4bf818873fe3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "Type-C";
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: clock-pcie0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <25000000>;
+	};
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"dio1", "", "", "dio0",
+		"", "", "pci_usb_sel", "",
+		"", "", "", "",
+		"", "", "", "",
+		"dio3", "", "dio2", "",
+		"pci_wdis#", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* off-board header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* USB1 Type-C front panel */
+&usb3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented but not a full featured OTG */
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+/* USB2 - MiniPCIe socket */
+&usb3_1 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08	0x40000146 /* DIO1 */
+			MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11	0x40000146 /* DIO0 */
+			MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14	0x40000106 /* PCIE_USBSEL */
+			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26	0x40000146 /* DIO2 */
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24	0x40000146 /* DIO3 */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x40000106 /* PCIE_WDIS# */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x150	/* IRQ */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x6	/* LEDG */
+			MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05	0x6	/* LEDR */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x106
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x146
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x140 /* USB1_FLT# */
+		>;
+	};
+
+	pinctrl_usbcon1: usbcon1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21	0x140 /* USB1_ID */
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x140
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx-2x.dts
new file mode 100644
index 000000000000..255e36f66b00
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx-2x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include "imx8mp-venice-gw702x.dtsi"
+#include "imx8mp-venice-gw72xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW72xx-2x i.MX8MP Development Kit";
+	compatible = "gateworks,imx8mp-gw72xx-2x", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
new file mode 100644
index 000000000000..cf747ec6fa16
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	aliases {
+		ethernet1 = &eth1;
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "otg";
+		vbus-supply = <&reg_usb1_vbus>;
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: clock-pcie0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb1_vbus: regulator-usb1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		regulator-name = "usb1_vbus";
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb2_vbus: regulator-usb2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		regulator-name = "usb2_vbus";
+		gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-name = "VDD_3V3_SD";
+		enable-active-high;
+		gpio = <&gpio2 19 0>; /* SD2_RESET */
+		off-on-delay-us = <12000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		startup-delay-us = <100>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <25000000>;
+	};
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"dio1", "", "", "dio0",
+		"", "", "pci_usb_sel", "",
+		"", "", "", "",
+		"", "", "rs485_en", "rs485_term",
+		"", "", "", "rs485_half",
+		"pci_wdis#", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			pcie@3,0 {
+				reg = <0x1800 0 0 0 0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				eth1: ethernet@0,0 {
+					reg = <0x0000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+					local-mac-address = [00 00 00 00 00 00];
+				};
+			};
+		};
+	};
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* off-board header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* RS232 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* USB1 - OTG */
+&usb3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented but not a full featured OTG */
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+/* USB2 - USB3.0 Hub */
+&usb3_1 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08	0x40000146 /* DIO1 */
+			MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11	0x40000146 /* DIO0 */
+			MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14	0x40000106 /* PCIE_USBSEL */
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27	0x40000106 /* RS485_HALF */
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22	0x40000106 /* RS485_EN */
+			MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23	0x40000106 /* RS485_TERM */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x40000106 /* PCIE_WDIS# */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x150	/* IRQ */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x6	/* LEDG */
+			MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05	0x6	/* LEDR */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x106
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x146
+		>;
+	};
+
+	pinctrl_reg_usb1_en: regusb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12	0x146 /* USB1_EN */
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x140 /* USB1_FLT# */
+		>;
+	};
+
+	pinctrl_usbcon1: usbcon1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21	0x140 /* USB1_ID */
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12	0x146 /* USBHUB_RST# */
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x140
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx-2x.dts
new file mode 100644
index 000000000000..000fd15e0c07
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx-2x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include "imx8mp-venice-gw702x.dtsi"
+#include "imx8mp-venice-gw73xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW73xx-2x i.MX8MP Development Kit";
+	compatible = "gateworks,imx8mp-gw73xx-2x", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
new file mode 100644
index 000000000000..5eb114d2360a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	aliases {
+		ethernet1 = &eth1;
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "otg";
+		vbus-supply = <&reg_usb1_vbus>;
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: clock-pcie0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb1_vbus: regulator-usb1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		regulator-name = "usb1_vbus";
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb2_vbus: regulator-usb2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		regulator-name = "usb2_vbus";
+		gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_wifi_en: regulator-wifi-en {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		regulator-name = "wl";
+		gpio = <&gpio4 19 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-name = "VDD_3V3_SD";
+		enable-active-high;
+		gpio = <&gpio2 19 0>; /* SD2_RESET */
+		off-on-delay-us = <12000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		startup-delay-us = <100>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <25000000>;
+	};
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"dio1", "", "", "dio0",
+		"", "", "pci_usb_sel", "",
+		"", "", "", "",
+		"", "", "rs485_en", "rs485_term",
+		"", "", "", "rs485_half",
+		"pci_wdis#", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			pcie@4,0 {
+				reg = <0x2000 0 0 0 0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				eth1: ethernet@0,0 {
+					reg = <0x0000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+					local-mac-address = [00 00 00 00 00 00];
+				};
+			};
+		};
+	};
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* bluetooth HCI */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
+	cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* RS232 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* USB1 - OTG */
+&usb3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented but not a full featured OTG */
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+/* USB2 - USB3.0 Hub */
+&usb3_1 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wifi_en>;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08	0x40000146 /* DIO1 */
+			MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11	0x40000146 /* DIO0 */
+			MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14	0x40000106 /* PCIE_USBSEL */
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27	0x40000106 /* RS485_HALF */
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22	0x40000106 /* RS485_EN */
+			MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23	0x40000106 /* RS485_TERM */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x40000106 /* PCIE_WDIS# */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x150	/* IRQ */
+		>;
+	};
+
+	pinctrl_bten: btengrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16	0x146
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x6	/* LEDG */
+			MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05	0x6	/* LEDR */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x106
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x146
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x146
+		>;
+	};
+
+	pinctrl_reg_usb1_en: regusb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12	0x146 /* USB1_EN */
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x140 /* USB1_FLT# */
+		>;
+	};
+
+	pinctrl_usbcon1: usbcon1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21	0x140 /* USB1_ID */
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12	0x146 /* USBHUB_RST# */
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x140
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
+			MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08	0x140
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso
new file mode 100644
index 000000000000..7d9fcdee58a7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mp-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	reg_vana: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	reg_vddl: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	reg_cam: regulator-cam {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_cam>;
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam";
+		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	cam24m: cam24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "cam24m";
+	};
+};
+
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	imx219: sensor@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		clocks = <&cam24m>;
+		VDIG-supply = <&reg_cam>;
+		VANA-supply = <&reg_vana>;
+		VDDL-supply = <&reg_vddl>;
+
+		port {
+			/* MIPI CSI-2 bus endpoint */
+			imx219_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi_0_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <456000000>;
+			};
+		};
+	};
+};
+
+&isi_0 {
+	status = "okay";
+};
+
+&mipi_csi_0 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			mipi_csi_0_in: endpoint {
+				remote-endpoint = <&imx219_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			mipi_csi_0_out: endpoint {
+				remote-endpoint = <&isi_in_0>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_reg_cam: regcamgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-rpidsi.dtso b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-rpidsi.dtso
new file mode 100644
index 000000000000..6a39f43435c2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-rpidsi.dtso
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gateworks,imx8mp-gw74xx", "fsl,imx8mp";
+
+	panel {
+		compatible = "powertip,ph800480t013-idf02";
+		power-supply = <&attiny>;
+		backlight = <&attiny>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	attiny: regulator@45 {
+		compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
+		reg = <0x45>;
+	};
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,burst-clock-frequency = <891000000>;
+	samsung,esc-clock-frequency = <54000000>;
+	samsung,pll-clock-frequency = <27000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	bridge@0 {
+		compatible = "toshiba,tc358762";
+		reg = <0>;
+		vddc-supply = <&attiny>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				data-lanes = <1 2>;
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
index 521215520a0f..12de7cf1e853 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -8,6 +8,8 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/net/ti-dp83867.h>
 
 #include "imx8mp.dtsi"
 
@@ -23,6 +25,8 @@
 		ethernet4 = &lan3;
 		ethernet5 = &lan4;
 		ethernet6 = &lan5;
+		rtc0 = &gsc_rtc;
+		rtc1 = &snvs_rtc;
 	};
 
 	chosen {
@@ -34,6 +38,21 @@
 		reg = <0x0 0x40000000 0 0x80000000>;
 	};
 
+	connector {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "Type-C";
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -100,6 +119,12 @@
 		};
 	};
 
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
 	pps {
 		compatible = "pps-gpio";
 		pinctrl-names = "default";
@@ -118,13 +143,22 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can1>;
+		regulator-name = "can1_stby";
+		gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_can2_stby: regulator-can2-stby {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_can>;
+		pinctrl-0 = <&pinctrl_reg_can2>;
 		regulator-name = "can2_stby";
-		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
+		gpio = <&gpio5 5 GPIO_ACTIVE_LOW>;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
@@ -135,10 +169,39 @@
 		compatible = "regulator-fixed";
 		regulator-name = "wl";
 		gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <100>;
+		startup-delay-us = <70000>;
 		enable-active-high;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_arm>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x0>;
+		spi-max-frequency = <25000000>;
 	};
 };
 
@@ -165,6 +228,29 @@
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0x0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_AMBER>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@2 {
+					reg = <2>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+			};
 		};
 	};
 };
@@ -182,6 +268,13 @@
 	};
 };
 
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
 &flexcan2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan2>;
@@ -192,38 +285,38 @@
 &gpio1 {
 	gpio-line-names =
 		"", "", "", "", "", "", "", "",
-		"", "", "dio0", "", "dio1", "", "", "",
+		"", "dio0", "", "dio1", "", "", "", "",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "";
 };
 
 &gpio2 {
 	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"pcie3_wdis#", "", "", "pcie1_wdis@", "pcie2_wdis#", "", "", "",
+		"", "", "", "", "", "", "m2_pin20", "",
+		"", "", "", "", "", "pcie1_wdis#", "pcie3_wdis#", "",
+		"", "", "pcie2_wdis#", "", "", "", "", "",
 		"", "", "", "", "", "", "", "";
 };
 
 &gpio3 {
 	gpio-line-names =
-		"m2_gdis#", "", "", "", "", "", "", "m2_rst#",
+		"", "", "", "", "", "", "m2_rst", "",
+		"", "", "", "", "", "", "m2_wdis2#", "",
 		"", "", "", "", "", "", "", "",
-		"m2_off#", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "";
 };
 
 &gpio4 {
 	gpio-line-names =
+		"", "", "m2_off#", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "m2_wdis#", "", "", "",
-		"", "", "", "", "", "", "", "uart_rs485";
+		"", "", "m2_wdis1#", "", "", "", "", "",
+		"", "", "", "", "", "", "", "rs485_en";
 };
 
 &gpio5 {
 	gpio-line-names =
-		"uart_half", "uart_term", "", "", "", "", "", "",
+		"rs485_hd", "rs485_term", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "";
@@ -231,8 +324,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	gsc: gsc@20 {
@@ -243,6 +339,8 @@
 		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		adc {
 			compatible = "gw,gsc-adc";
@@ -256,11 +354,17 @@
 			};
 
 			channel@8 {
-				gw,mode = <1>;
+				gw,mode = <3>;
 				reg = <0x08>;
 				label = "vdd_bat";
 			};
 
+			channel@16 {
+				gw,mode = <4>;
+				reg = <0x16>;
+				label = "fan_tach";
+			};
+
 			channel@82 {
 				gw,mode = <2>;
 				reg = <0x82>;
@@ -326,6 +430,12 @@
 				label = "vdd_dram";
 			};
 
+			channel@9e {
+				gw,mode = <2>;
+				reg = <0x9e>;
+				label = "vdd_1p0";
+			};
+
 			channel@a2 {
 				gw,mode = <2>;
 				reg = <0xa2>;
@@ -333,6 +443,11 @@
 				gw,voltage-divider-ohms = <10000 10000>;
 			};
 		};
+
+		fan-controller@a {
+			compatible = "gw,gsc-fan";
+			reg = <0x0a>;
+		};
 	};
 
 	gpio: gpio@23 {
@@ -344,85 +459,6 @@
 		interrupts = <4>;
 	};
 
-	pmic@25 {
-		compatible = "nxp,pca9450c";
-		reg = <0x25>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-
-		regulators {
-			BUCK1 {
-				regulator-name = "BUCK1";
-				regulator-min-microvolt = <720000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <3125>;
-			};
-
-			BUCK2 {
-				regulator-name = "BUCK2";
-				regulator-min-microvolt = <720000>;
-				regulator-max-microvolt = <1025000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <3125>;
-				nxp,dvs-run-voltage = <950000>;
-				nxp,dvs-standby-voltage = <850000>;
-			};
-
-			BUCK4 {
-				regulator-name = "BUCK4";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			BUCK5 {
-				regulator-name = "BUCK5";
-				regulator-min-microvolt = <1650000>;
-				regulator-max-microvolt = <1950000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			BUCK6 {
-				regulator-name = "BUCK6";
-				regulator-min-microvolt = <1045000>;
-				regulator-max-microvolt = <1155000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			LDO1 {
-				regulator-name = "LDO1";
-				regulator-min-microvolt = <1650000>;
-				regulator-max-microvolt = <1950000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			LDO3 {
-				regulator-name = "LDO3";
-				regulator-min-microvolt = <1710000>;
-				regulator-max-microvolt = <1890000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			LDO5 {
-				regulator-name = "LDO5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-
 	eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -447,7 +483,7 @@
 		pagesize = <16>;
 	};
 
-	rtc@68 {
+	gsc_rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -455,8 +491,11 @@
 
 &i2c2 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	accelerometer@19 {
@@ -467,7 +506,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "INT1";
 	};
 
 	switch: switch@5f {
@@ -484,36 +522,40 @@
 			lan1: port@0 {
 				reg = <0>;
 				label = "lan1";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan2: port@1 {
 				reg = <1>;
 				label = "lan2";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan3: port@2 {
 				reg = <2>;
 				label = "lan3";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan4: port@3 {
 				reg = <3>;
 				label = "lan4";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan5: port@4 {
 				reg = <4>;
 				label = "lan5";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
-			port@6 {
-				reg = <6>;
-				label = "cpu";
+			port@5 {
+				reg = <5>;
 				ethernet = <&fec>;
 				phy-mode = "rgmii-id";
 
@@ -526,19 +568,118 @@
 	};
 };
 
-/* off-board header */
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <720000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_arm: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <720000>;
+				regulator-max-microvolt = <1025000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1045000>;
+				regulator-max-microvolt = <1155000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1710000>;
+				regulator-max-microvolt = <1890000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 /* off-board header */
 &i2c4 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio2 17 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -556,6 +697,20 @@
 	status = "okay";
 };
 
+/* bluetooth HCI */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
+	cts-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
@@ -563,20 +718,32 @@
 };
 
 /* USB1 - Type C front panel */
-&usb3_phy0 {
+&usb3_0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb1>;
+	fsl,over-current-active-low;
 	status = "okay";
 };
 
-&usb3_0 {
-	fsl,over-current-active-low;
+&usb3_phy0 {
 	status = "okay";
 };
 
 &usb_dwc3_0 {
-	dr_mode = "host";
+	/* dual role is implemented but not a full featured OTG */
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
 	status = "okay";
+
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
 };
 
 /* USB2 - USB3.0 Hub */
@@ -596,6 +763,25 @@
 	status = "okay";
 };
 
+/* SDIO WiFi */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wifi_en>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@0 {
+		compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac";
+		reg = <0>;
+	};
+};
+
 /* eMMC */
 &usdhc3 {
 	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
@@ -624,13 +810,15 @@
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09	0x40000040 /* DIO0 */
 			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11	0x40000040 /* DIO1 */
-			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x40000040 /* M2SKT_OFF# */
-			MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17	0x40000150 /* PCIE1_WDIS# */
-			MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18	0x40000150 /* PCIE2_WDIS# */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x40000040 /* M2SKT_OFF# */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x40000150 /* M2SKT_WDIS1# */
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x40000040 /* M2SKT_PIN20 */
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11	0x40000040 /* M2SKT_PIN22 */
+			MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13	0x40000150 /* PCIE1_WDIS# */
 			MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14	0x40000150 /* PCIE3_WDIS# */
+			MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18	0x40000150 /* PCIE2_WDIS# */
 			MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x40000040 /* M2SKT_RST# */
-			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x40000150 /* M2SKT_WDIS# */
-			MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00	0x40000150 /* M2SKT_GDIS# */
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x40000150 /* M2KST_WDIS2# */
 			MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01	0x40000104 /* UART_TERM */
 			MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31	0x40000104 /* UART_RS485 */
 			MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00	0x40000104 /* UART_HALF */
@@ -683,6 +871,13 @@
 		>;
 	};
 
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX		0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX		0x154
+		>;
+	};
+
 	pinctrl_flexcan2: flexcan2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x154
@@ -703,6 +898,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x400001c2
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
@@ -710,6 +912,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
@@ -717,6 +926,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x400001c3
+		>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c2
@@ -724,6 +940,13 @@
 		>;
 	};
 
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20	0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x400001c3
+		>;
+	};
+
 	pinctrl_ksz: kszgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x150 /* IRQ# */
@@ -738,6 +961,12 @@
 		>;
 	};
 
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17	0x106
+		>;
+	};
+
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x140
@@ -750,12 +979,18 @@
 		>;
 	};
 
-	pinctrl_reg_can: regcangrp {
+	pinctrl_reg_can1: regcan1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19	0x154
 		>;
 	};
 
+	pinctrl_reg_can2: regcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05	0x154
+		>;
+	};
+
 	pinctrl_reg_usb2: regusb2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06	0x140
@@ -768,12 +1003,12 @@
 		>;
 	};
 
-	pinctrl_sai2: sai2grp {
+	pinctrl_spi1: spi1grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC
-			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00
-			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK
-			MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK	0x82
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI	0x82
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO	0x82
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09	0x140
 		>;
 	};
 
@@ -825,7 +1060,12 @@
 	pinctrl_usb1: usb1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x140
-			MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID	0x140
+		>;
+	};
+
+	pinctrl_usbcon1: usb1congrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x140
 		>;
 	};
 
@@ -840,6 +1080,28 @@
 		>;
 	};
 
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6
+		>;
+	};
+
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx-2x.dts
new file mode 100644
index 000000000000..7ca68df9e516
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx-2x.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include "imx8mp-venice-gw702x.dtsi"
+#include "imx8mp-venice-gw75xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW75xx-2x i.MX8MP Development Kit";
+	compatible = "gateworks,imx8mp-gw75xx-2x", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+/* Disable SOM interfaces not used on baseboard */
+&eqos {
+	status = "disabled";
+};
+
+&usdhc1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx.dtsi
new file mode 100644
index 000000000000..f90b293c85fc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx.dtsi
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb2_vbus";
+		gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		compatible = "regulator-fixed";
+		regulator-name = "SD2_3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "gpioa", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "gpiod", "", "",
+		"gpiob", "gpioc", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "pci_usb_sel", "",
+		"pci_wdis#", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		st,drdy-int-pin = <1>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c32";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* USB1 - Type C front panel SINK port J14 */
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+/* USB2 4-port USB3.0 HUB:
+ *  P1 - USBC connector (host only)
+ *  P2 - USB2 test connector
+ *  P3 - miniPCIe full card
+ *  P4 - miniPCIe half card
+ */
+&usb3_phy1 {
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&usb3_1 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x40000040 /* GPIOA */
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x40000040 /* GPIOD */
+			MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04	0x40000040 /* GPIOB */
+			MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05	0x40000040 /* GPIOC */
+			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26	0x40000106 /* PCI_USBSEL */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x40000106 /* PCI_WDIS# */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08	0x159
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22	0x6	/* LEDG */
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27	0x6	/* LEDR */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x106
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x106
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12	0x6 /* USBHUB_RST# (ext p/u) */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x140
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2x.dts
new file mode 100644
index 000000000000..597813308630
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include "imx8mp-venice-gw702x.dtsi"
+#include "imx8mp-venice-gw82xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW82xx-2x i.MX8MP Development Kit";
+	compatible = "gateworks,imx8mp-gw82xx-2x", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx.dtsi
new file mode 100644
index 000000000000..2b86cc62a41a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx.dtsi
@@ -0,0 +1,533 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	aliases {
+		ethernet1 = &eth1;
+		fsa1 = &fsa0;
+		fsa2 = &fsa1;
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: clock-pcie0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb2_vbus: regulator-usb2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		regulator-name = "usb2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-name = "VDD_3V3_SD";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <12000>;
+		startup-delay-us = <100>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>,	/* CS0 onboard TPM */
+		   <&gpio5 13 GPIO_ACTIVE_LOW>, /* CS1 off-board J32 SPI */
+		   <&gpio1 12 GPIO_ACTIVE_LOW>, /* CS3 off-board J52 FSA1 */
+		   <&gpio4 26 GPIO_ACTIVE_LOW>; /* CS2 off-board J51 FSA2 */
+	status = "okay";
+
+	tpm@0 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "fsa2_gpio1", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"dio1", "fsa1_gpio2", "", "dio0",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "rs485_en", "rs485_term",
+		"fsa2_gpio2", "fsa1_gpio1", "", "rs485_half",
+		"", "", "", "";
+};
+
+&i2c2 {
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		st,drdy-int-pin = <1>;
+	};
+
+	magnetometer@1e {
+		compatible = "st,lis2mdl";
+		reg = <0x1e>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c3 {
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* J30 */
+		fsa1: i2c@0 {
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fsa2i2c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				interrupt-parent = <&gpio4>;
+				interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c02";
+				reg = <0x54>;
+				pagesize = <16>;
+			};
+
+			eeprom@55 {
+				compatible = "atmel,24c02";
+				reg = <0x55>;
+				pagesize = <16>;
+			};
+		};
+
+		/* J29 */
+		fsa0: i2c@1 {
+			reg = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fsa1i2c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				interrupt-parent = <&gpio4>;
+				interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c02";
+				reg = <0x54>;
+				pagesize = <16>;
+			};
+
+			eeprom@55 {
+				compatible = "atmel,24c02";
+				reg = <0x55>;
+				pagesize = <16>;
+			};
+		};
+
+		/* J33 */
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&pcie_phy {
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			pcie@7,0 {
+				reg = <0x3800 0 0 0 0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				eth1: ethernet@0,0 {
+					reg = <0x0000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+					local-mac-address = [00 00 00 00 00 00];
+				};
+			};
+		};
+	};
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* RS232 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* USB1 - FSA1 */
+&usb3_0 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* USB2 - USB3.0 Hub */
+&usb3_1 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SDIO 1.8V */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; /* CD is active high */
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08	0x40000146 /* DIO1 */
+			MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11	0x40000146 /* DIO0 */
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27	0x40000106 /* RS485_HALF */
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22	0x40000106 /* RS485_EN */
+			MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23	0x40000106 /* RS485_TERM */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x150	/* IRQ# */
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX		0x154
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX		0x154
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x154
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX		0x154
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x6	/* LEDG */
+			MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05	0x6	/* LEDR */
+		>;
+	};
+
+	pinctrl_fsa1i2c: fsa1i2cgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14	0x1d0		/* FSA1_ALERT# */
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25	0x400001d0	/* FSA1_GPIO1 */
+			MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09	0x400001d0	/* FSA1_GPIO2 */
+		>;
+	};
+
+	pinctrl_fsa2i2c: fsa2i2cgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04	0x1d0		/* FSA2_ALERT# */
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x400001d0	/* FSA2_GPIO1 */
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24	0x400001d0	/* FSA2_GPIO2 */
+		>;
+	};
+
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x140	/* IRQ# */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x106	/* PERST# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x146
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12	0x146	/* USBHUB_RST# */
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0xd0
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0xd0
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0xd0
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140	/* J32_CS */
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x140	/* TPM_CS */
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12	0x140	/* FSA1_CS */
+			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26	0x140	/* FSA2_CS */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
index 4b8f86f63081..1493319aa748 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
@@ -3,7 +3,72 @@
  * Copyright 2022 Toradex
  */
 
-/* TODO: Audio Codec */
+/ {
+	native-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X21";
+		type = "a";
+
+		port {
+			native_hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "verdin-wm8904";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
+			sound-dai = <&wm8904_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+	};
+
+	reg_usb_hub: regulator-usb-hub {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		regulator-name = "HUB_PWR_EN";
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		regulator-name = "PCIE_1_PWR_EN";
+		startup-delay-us = <100000>;
+	};
+};
+
+/* Verdin HDMI_1 Audio */
+&aud2htx {
+	status = "okay";
+};
 
 &backlight {
 	power-supply = <&reg_3p3v>;
@@ -41,6 +106,32 @@
 	status = "okay";
 };
 
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
+/* Verdin HDMI_1 */
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&native_hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 /* Current measurement into module VCC */
 &hwmon {
 	status = "okay";
@@ -64,10 +155,41 @@
 &i2c4 {
 	status = "okay";
 
-	/* TODO: Audio Codec */
+	/* Audio Codec */
+	wm8904_1a: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_1p8v>;
+		CPVDD-supply = <&reg_1p8v>;
+		DBVDD-supply = <&reg_1p8v>;
+		DCVDD-supply = <&reg_1p8v>;
+		MICVDD-supply = <&reg_1p8v>;
+	};
 };
 
-/* TODO: Verdin PCIE_1 */
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
 
 /* Verdin PWM_1 */
 &pwm1 {
@@ -88,7 +210,24 @@
 	vin-supply = <&reg_3p3v>;
 };
 
-/* TODO: Verdin I2S_1 */
+/* We support turning off sleep moci on Dahlia */
+&reg_force_sleep_moci {
+	status = "disabled";
+};
+
+/* Verdin I2S_1 */
+&sai1 {
+	assigned-clocks = <&clk IMX8MP_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+/* Verdin HDMI_1 Audio */
+&sound_hdmi {
+	status = "okay";
+};
 
 /* Verdin UART_1 */
 &uart1 {
@@ -116,6 +255,7 @@
 
 /* Verdin USB_2 */
 &usb3_1 {
+	fsl,permanently-attached;
 	status = "okay";
 };
 
@@ -123,6 +263,25 @@
 	status = "okay";
 };
 
+&usb_dwc3_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usb_hub_3_0: usb-hub@1 {
+		compatible = "usb424,5744";
+		reg = <1>;
+		peer-hub = <&usb_hub_2_0>;
+		vdd-supply = <&reg_usb_hub>;
+	};
+
+	usb_hub_2_0: usb-hub@2 {
+		compatible = "usb424,2744";
+		reg = <2>;
+		peer-hub = <&usb_hub_3_0>;
+		vdd-supply = <&reg_usb_hub>;
+	};
+};
+
 /* Verdin SD_1 */
 &usdhc2 {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
index cefabe65b252..a38e7c947a42 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
@@ -3,22 +3,93 @@
  * Copyright 2022 Toradex
  */
 
-#include "imx8mp-verdin-dahlia.dtsi"
-
 / {
-	/* TODO: Audio Codec */
+	native-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X37";
+		type = "a";
+
+		port {
+			native_hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
 
 	reg_eth2phy: regulator-eth2phy {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio_expander_21 4 GPIO_ACTIVE_HIGH>; /* ETH_PWR_EN */
-		off-on-delay = <500000>;
+		off-on-delay-us = <500000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
 		regulator-name = "+V3.3_ETH";
 		startup-delay-us = <200000>;
 		vin-supply = <&reg_3p3v>;
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "verdin-nau8822";
+		simple-audio-card,routing =
+			"Headphones", "LHP",
+			"Headphones", "RHP",
+			"Speaker", "LSPK",
+			"Speaker", "RSPK",
+			"Line Out", "AUXOUT1",
+			"Line Out", "AUXOUT2",
+			"LAUX", "Line In",
+			"RAUX", "Line In",
+			"LMICP", "Mic In",
+			"RMICP", "Mic In";
+		simple-audio-card,widgets =
+			"Headphones", "Headphones",
+			"Line Out", "Line Out",
+			"Speaker", "Speaker",
+			"Microphone", "Mic In",
+			"Line", "Line In";
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
+			sound-dai = <&nau8822_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+	};
+};
+
+/* Verdin HDMI_1 Audio */
+&aud2htx {
+	status = "okay";
+};
+
+&backlight {
+	power-supply = <&reg_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&eqos {
+	status = "okay";
 };
 
 &fec {
@@ -26,21 +97,173 @@
 	status = "okay";
 };
 
+&flexcan1 {
+	status = "okay";
+};
+
+&flexcan2 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+	status = "okay";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
 &gpio_expander_21 {
 	status = "okay";
 	vcc-supply = <&reg_1p8v>;
 };
 
-/* TODO: Verdin I2C_1 with Audio Codec */
+/* Verdin HDMI_1 */
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&native_hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+/* Current measurement into module VCC */
+&hwmon {
+	status = "okay";
+};
+
+&hwmon_temp {
+	vs-supply = <&reg_1p8v>;
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+
+	/* Audio Codec */
+	nau8822_1a: audio-codec@1a {
+		compatible = "nuvoton,nau8822";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+	status = "okay";
+};
+
+&reg_usdhc2_vmmc {
+	vin-supply = <&reg_3p3v>;
+};
+
+/* Verdin I2S_1 */
+&sai1 {
+	assigned-clocks = <&clk IMX8MP_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+/* Verdin HDMI_1 Audio */
+&sound_hdmi {
+	status = "okay";
+};
 
 /* Verdin UART_1, connector X50 through RS485 transceiver */
 &uart1 {
 	linux,rs485-enabled-at-boot-time;
 	rs485-rts-active-low;
 	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux Console */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+	fsl,permanently-attached;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
 };
 
 /* Limit frequency on dev board due to long traces and bad signal integrity */
 &usdhc2 {
 	max-frequency = <100000000>;
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-ivy.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-ivy.dtsi
new file mode 100644
index 000000000000..db1b4ee7728c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-ivy.dtsi
@@ -0,0 +1,512 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ *
+ * Common dtsi for Verdin IMX8MP SoM on Ivy carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus
+ * https://www.toradex.com/products/carrier-board/ivy-carrier-board
+ */
+
+#include <dt-bindings/mux/mux.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	/* AIN1 Voltage w/o AIN1_MODE gpio control */
+	ain1_voltage_unmanaged: voltage-divider-ain1 {
+		compatible = "voltage-divider";
+		#io-channel-cells = <1>;
+		io-channels = <&ivy_adc1 0>;
+		full-ohms = <19>;
+		output-ohms = <1>;
+	};
+
+	/* AIN1 Current w/o AIN1_MODE gpio control */
+	ain1_current_unmanaged: current-sense-shunt-ain1 {
+		compatible = "current-sense-shunt";
+		#io-channel-cells = <0>;
+		io-channels = <&ivy_adc1 1>;
+		shunt-resistor-micro-ohms = <100000000>;
+	};
+
+	/* AIN1_MODE - SODIMM 216 */
+	ain1_mode_mux_ctrl: mux-controller-0 {
+		compatible = "gpio-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio5>;
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	ain1-voltage {
+		compatible = "io-channel-mux";
+		channels = "ain1_voltage", "";
+		io-channels = <&ain1_voltage_unmanaged 0>;
+		io-channel-names = "parent";
+		mux-controls = <&ain1_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	ain1-current {
+		compatible = "io-channel-mux";
+		channels = "", "ain1_current";
+		io-channels = <&ain1_current_unmanaged>;
+		io-channel-names = "parent";
+		mux-controls = <&ain1_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	/* AIN2 Voltage w/o AIN2_MODE gpio control */
+	ain2_voltage_unmanaged: voltage-divider-ain2 {
+		compatible = "voltage-divider";
+		#io-channel-cells = <1>;
+		io-channels = <&ivy_adc2 0>;
+		full-ohms = <19>;
+		output-ohms = <1>;
+	};
+
+	/* AIN2 Current w/o AIN2_MODE gpio control */
+	ain2_current_unmanaged: current-sense-shunt-ain2 {
+		compatible = "current-sense-shunt";
+		#io-channel-cells = <0>;
+		io-channels = <&ivy_adc2 1>;
+		shunt-resistor-micro-ohms = <100000000>;
+	};
+
+	/* AIN2_MODE - SODIMM 218 */
+	ain2_mode_mux_ctrl: mux-controller-1 {
+		compatible = "gpio-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio6>;
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	ain2-voltage {
+		compatible = "io-channel-mux";
+		channels = "ain2_voltage", "";
+		io-channels = <&ain2_voltage_unmanaged 0>;
+		io-channel-names = "parent";
+		mux-controls = <&ain2_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	ain2-current {
+		compatible = "io-channel-mux";
+		channels = "", "ain2_current";
+		io-channels = <&ain2_current_unmanaged>;
+		io-channel-names = "parent";
+		mux-controls = <&ain2_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ivy_leds>;
+
+		/* D7 Blue - SODIMM 30 - LEDs.GPIO1 */
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D7 Green - SODIMM 32 - LEDs.GPIO2 */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D7 Red - SODIMM 34 - LEDs.GPIO3 */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D8 Blue - SODIMM 36 - LEDs.GPIO4 */
+		led-3 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D8 Green - SODIMM 54 - LEDs.GPIO5 */
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D8 Red - SODIMM 44 - LEDs.GPIO6 */
+		led-5 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D9 Blue - SODIMM 46 - LEDs.GPIO7 */
+		led-6 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <3>;
+			gpios = <&gpio5 01 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D9 Red - SODIMM 48 - LEDs.GPIO8 */
+		led-7 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <3>;
+			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_3v2_ain1: regulator-3v2-ain1 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3200000>;
+		regulator-min-microvolt = <3200000>;
+		regulator-name = "+3V2_AIN1";
+	};
+
+	reg_3v2_ain2: regulator-3v2-ain2 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3200000>;
+		regulator-min-microvolt = <3200000>;
+		regulator-name = "+3V2_AIN2";
+	};
+
+	/* Ivy Power Supply Input Voltage */
+	ivy-input-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_1 */
+		io-channels = <&verdin_som_adc 7>;
+		full-ohms = <204700>; /* 200k + 4.7k */
+		output-ohms = <4700>;
+	};
+
+	ivy-5v-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_2 */
+		io-channels = <&verdin_som_adc 6>;
+		full-ohms = <39000>; /* 27k + 12k */
+		output-ohms = <12000>;
+	};
+
+	ivy-3v3-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_3 */
+		io-channels = <&verdin_som_adc 5>;
+		full-ohms = <54000>; /* 27k + 27k */
+		output-ohms = <27000>;
+	};
+
+	ivy-1v8-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_4 */
+		io-channels = <&verdin_som_adc 4>;
+		full-ohms = <39000>; /* 12k + 27k */
+		output-ohms = <27000>;
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	pinctrl-0 = <&pinctrl_ecspi1>,
+		    <&pinctrl_gpio1>,
+		    <&pinctrl_gpio4>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>,
+		   <&gpio1 0 GPIO_ACTIVE_LOW>,
+		   <&gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		spi-max-frequency = <18500000>;
+	};
+
+	fram@2 {
+		compatible = "fujitsu,mb85rs256", "atmel,at25";
+		reg = <2>;
+		address-width = <16>;
+		size = <32768>;
+		spi-max-frequency = <33000000>;
+		pagesize = <1>;
+	};
+};
+
+/* EEPROM on Ivy */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+/* Verdin ETH_1 */
+&eqos {
+	status = "okay";
+};
+
+/* Verdin ETH_2 */
+&fec {
+	phy-handle = <&ethphy2>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&verdin_eth2_mdio {
+	ethphy2: ethernet-phy@2 {
+		reg = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+/* Verdin CAN_1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&flexcan2 {
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", /* 0 */
+		"GPIO2", /* Verdin GPIO_2 - SODIMM 208 */
+		"",
+		"",
+		"",
+		"GPIO3", /* Verdin GPIO_3 - SODIMM 210 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", /* 0 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"DIG_1", /* SODIMM 56 */
+		"DIG_2", /* SODIMM 58 */
+		"REL1",  /* SODIMM 60 */
+		"REL2",  /* SODIMM 62 */
+		"", /* 10 */
+		"",
+		"",
+		"",
+		"REL4", /* SODIMM 66 */
+		"",
+		"REL3", /* SODIMM 64 */
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+};
+
+/* Temperature sensor on Ivy */
+&hwmon_temp {
+	compatible = "ti,tmp1075";
+	status = "okay";
+};
+
+/* Verdin I2C_4 CSI */
+&i2c3 {
+	status = "okay";
+
+	ivy_adc1: adc@40 {
+		compatible = "ti,ads1119";
+		reg = <0x40>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio7>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		avdd-supply = <&reg_3v2_ain1>;
+		dvdd-supply = <&reg_3v2_ain1>;
+		vref-supply = <&reg_3v2_ain1>;
+		#address-cells = <1>;
+		#io-channel-cells = <1>;
+		#size-cells = <0>;
+
+		/* AIN1 0-33V Voltage Input */
+		channel@0 {
+			reg = <0>;
+			diff-channels = <0 1>;
+		};
+
+		/* AIN1 0-20mA Current Input */
+		channel@1 {
+			reg = <1>;
+			diff-channels = <2 3>;
+		};
+	};
+
+	ivy_adc2: adc@41 {
+		compatible = "ti,ads1119";
+		reg = <0x41>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio8>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		avdd-supply = <&reg_3v2_ain2>;
+		dvdd-supply = <&reg_3v2_ain2>;
+		vref-supply = <&reg_3v2_ain2>;
+		#address-cells = <1>;
+		#io-channel-cells = <1>;
+		#size-cells = <0>;
+
+		/* AIN2 0-33V Voltage Input */
+		channel@0 {
+			reg = <0>;
+			diff-channels = <0 1>;
+		};
+
+		/* AIN2 0-20mA Current Input */
+		channel@1 {
+			reg = <1>;
+			diff-channels = <2 3>;
+		};
+	};
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>, <&pinctrl_gpio3>,
+		    <&pinctrl_ivy_dig_inputs>, <&pinctrl_ivy_relays>;
+
+	pinctrl_ivy_dig_inputs: ivydiginputsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x96>, /* SODIMM 56 */
+			<MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x96>; /* SODIMM 58 */
+	};
+
+	pinctrl_ivy_leds: ivyledsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25	0x16>, /* SODIMM 30 */
+			<MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22	0x16>, /* SODIMM 32 */
+			<MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19	0x16>, /* SODIMM 34 */
+			<MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x16>, /* SODIMM 36 */
+			<MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31	0x16>, /* SODIMM 44 */
+			<MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01	0x16>, /* SODIMM 46 */
+			<MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30	0x16>, /* SODIMM 48 */
+			<MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x16>; /* SODIMM 54 */
+	};
+
+	pinctrl_ivy_relays: ivyrelaysgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08	0x16>, /* SODIMM 60 */
+			<MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09	0x16>, /* SODIMM 62 */
+			<MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x16>, /* SODIMM 64 */
+			<MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x16>; /* SODIMM 66 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi
new file mode 100644
index 000000000000..11cf3bdc95c4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin IMX8MP SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	native-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X14";
+		type = "a";
+
+		port {
+			native_hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin HDMI_1 Audio */
+&aud2htx {
+	status = "okay";
+};
+
+&backlight {
+	power-supply = <&reg_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_tpm_cs>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, <&gpio3 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm_irq>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* EEPROM on Mallow */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+/* Verdin ETH_1 */
+&eqos {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&flexcan2 {
+	status = "okay";
+};
+
+/* Verdin HDMI_1 */
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&native_hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+/* Temperature sensor on Mallow */
+&hwmon_temp {
+	compatible = "ti,tmp1075";
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+	status = "okay";
+};
+
+&reg_usdhc2_vmmc {
+	vin-supply = <&reg_3p3v>;
+};
+
+/* Verdin HDMI_1 Audio */
+&sound_hdmi {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds: ledsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00	0x106>, /* SODIMM 52 */
+			<MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x106>, /* SODIMM 54 */
+			<MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x106>, /* SODIMM 56 */
+			<MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x106>; /* SODIMM 58 */
+	};
+
+	pinctrl_tpm_cs: tpmcsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x82>; /* SODIMM 64 */
+	};
+
+	pinctrl_tpm_irq: tpmirqgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x16>; /* SODIMM 66 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-ivy.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-ivy.dts
new file mode 100644
index 000000000000..cb49690050ff
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-ivy.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-nonwifi.dtsi"
+#include "imx8mp-verdin-ivy.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus on Ivy";
+	compatible = "toradex,verdin-imx8mp-nonwifi-ivy",
+		     "toradex,verdin-imx8mp-nonwifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts
new file mode 100644
index 000000000000..6a536a4964bb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-nonwifi.dtsi"
+#include "imx8mp-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus on Mallow Board";
+	compatible = "toradex,verdin-imx8mp-nonwifi-mallow",
+		     "toradex,verdin-imx8mp-nonwifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-yavia.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-yavia.dts
new file mode 100644
index 000000000000..b28477df1ec6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-yavia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-nonwifi.dtsi"
+#include "imx8mp-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus on Yavia Board";
+	compatible = "toradex,verdin-imx8mp-nonwifi-yavia",
+		     "toradex,verdin-imx8mp-nonwifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi
index 91d597391b7c..2ee91f31e7f0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi
@@ -41,8 +41,7 @@
 	pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
 		    <&pinctrl_gpio3>, <&pinctrl_gpio4>,
 		    <&pinctrl_gpio7>, <&pinctrl_gpio8>,
-		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>,
-		    <&pinctrl_hdmi_hog>;
+		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>;
 };
 
 /*
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-ivy.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-ivy.dts
new file mode 100644
index 000000000000..22b8fe70b36d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-ivy.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-wifi.dtsi"
+#include "imx8mp-verdin-ivy.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus WB on Ivy";
+	compatible = "toradex,verdin-imx8mp-wifi-ivy",
+		     "toradex,verdin-imx8mp-wifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts
new file mode 100644
index 000000000000..08b7aef3fdde
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-wifi.dtsi"
+#include "imx8mp-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus WB on Mallow Board";
+	compatible = "toradex,verdin-imx8mp-wifi-mallow",
+		     "toradex,verdin-imx8mp-wifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-yavia.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-yavia.dts
new file mode 100644
index 000000000000..100bef12089c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-yavia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-wifi.dtsi"
+#include "imx8mp-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus WB on Yavia Board";
+	compatible = "toradex,verdin-imx8mp-wifi-yavia",
+		     "toradex,verdin-imx8mp-wifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
index 36289c175e6e..cae06cb67cd3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
@@ -55,8 +55,7 @@
 	pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
 		    <&pinctrl_gpio3>, <&pinctrl_gpio4>,
 		    <&pinctrl_gpio7>, <&pinctrl_gpio8>,
-		    <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hog4>,
-		    <&pinctrl_hdmi_hog>;
+		    <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hog4>;
 };
 
 /* On-module Bluetooth */
@@ -65,13 +64,17 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_bt_uart>;
 	status = "okay";
+
+	bluetooth {
+		compatible = "mrvl,88w8997";
+		max-speed = <921600>;
+	};
 };
 
 /* On-module Wi-Fi */
 &usdhc1 {
 	bus-width = <4>;
 	keep-power-in-suspend;
-	max-frequency = <100000000>;
 	non-removable;
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_wifi_ctrl>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi
new file mode 100644
index 000000000000..cc389cda2af2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	native-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "J15";
+		type = "a";
+
+		port {
+			native_hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	/* Carrier Board Supply +V1.8 */
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+V1.8_SW";
+	};
+
+	/* Carrier Board Supply +V3.3 */
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SW";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_yavia>;
+
+		/* SODIMM 52 - LD1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 54 - LD1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 56 - LD1_BLUE */
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 58 - LD2_RED */
+		led-3 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 60 - LD2_GREEN */
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 62 - LD2_BLUE */
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin HDMI_1 Audio */
+&aud2htx {
+	status = "okay";
+};
+
+&backlight {
+	power-supply = <&reg_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin Yavia board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&eqos {
+	status = "okay";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+};
+
+/* Verdin HDMI_1 */
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&native_hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&hwmon_temp {
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+	status = "okay";
+};
+
+&reg_usdhc2_vmmc {
+	vin-supply = <&reg_3p3v>;
+};
+
+/* Verdin HDMI_1 Audio */
+&sound_hdmi {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux Console */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds_yavia: ledsyaviagrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00	0x106	/* SODIMM 52 */
+			MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x106	/* SODIMM 54 */
+			MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x106	/* SODIMM 56 */
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x106	/* SODIMM 58 */
+			MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08	0x106	/* SODIMM 60 */
+			MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09	0x106	/* SODIMM 62 */
+		>;
+	};
+
+	pinctrl_gpios_ext_yavia: gpiosextyaviagrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02	0x106	/* SODIMM 64 */
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x106	/* SODIMM 66 */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index c5987bdbb383..d43ba0087126 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -3,7 +3,8 @@
  * Copyright 2022 Toradex
  */
 
-#include "dt-bindings/pwm/pwm.h"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
 #include "imx8mp.dtsi"
 
 / {
@@ -44,12 +45,29 @@
 		status = "disabled";
 	};
 
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		label = "Type-C";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_1_id>;
+		self-powered;
+		type = "micro";
+		vbus-supply = <&reg_usb1_vbus>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		button-wakeup {
+		key-wakeup {
 			debounce-interval = <10>;
 			/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
 			gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
@@ -59,6 +77,14 @@
 		};
 	};
 
+	sound_hdmi: sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+		status = "disabled";
+	};
+
 	/* Carrier Board Supplies */
 	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
@@ -86,7 +112,7 @@
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
-		off-on-delay = <500000>;
+		off-on-delay-us = <500000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_eth>;
 		regulator-always-on;
@@ -98,6 +124,22 @@
 		vin-supply = <&reg_vdd_3v3>;
 	};
 
+	/*
+	 * By default we enable CTRL_SLEEP_MOCI#, this is required to have
+	 * peripherals on the carrier board powered.
+	 * If more granularity or power saving is required this can be disabled
+	 * in the carrier board device tree files.
+	 */
+	reg_force_sleep_moci: regulator-force-sleep-moci {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "CTRL_SLEEP_MOCI#";
+	};
+
 	reg_usb1_vbus: regulator-usb1-vbus {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -127,13 +169,13 @@
 		enable-active-high;
 		/* Verdin SD_1_PWR_EN (SODIMM 76) */
 		gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
-		off-on-delay = <100000>;
+		off-on-delay-us = <100000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
 		regulator-name = "+V3.3_SD";
-		startup-delay-us = <2000>;
+		startup-delay-us = <20000>;
 	};
 
 	reserved-memory {
@@ -146,6 +188,22 @@
 	};
 };
 
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
 &cpu_alert0 {
 	temperature = <95000>;
 };
@@ -167,7 +225,6 @@
 &eqos {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-id";
-	phy-supply = <&reg_module_eth1phy>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
 	snps,force_thresh_dma_mode;
@@ -192,7 +249,6 @@
 
 	mtl_rx_setup: rx-queues-config {
 		snps,rx-queues-to-use = <5>;
-		snps,rx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
@@ -227,7 +283,6 @@
 
 	mtl_tx_setup: tx-queues-config {
 		snps,tx-queues-to-use = <5>;
-		snps,tx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
@@ -265,7 +320,7 @@
 	pinctrl-0 = <&pinctrl_fec>;
 	pinctrl-1 = <&pinctrl_fec_sleep>;
 
-	mdio {
+	verdin_eth2_mdio: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -286,7 +341,6 @@
 	status = "disabled";
 };
 
-
 /* Verdin CAN_2 */
 &flexcan2 {
 	pinctrl-names = "default";
@@ -339,16 +393,6 @@
 			  "SODIMM_82",
 			  "SODIMM_70",
 			  "SODIMM_72";
-
-	ctrl-sleep-moci-hog {
-		gpio-hog;
-		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
-		gpios = <29 GPIO_ACTIVE_HIGH>;
-		line-name = "CTRL_SLEEP_MOCI#";
-		output-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
-	};
 };
 
 &gpio3 {
@@ -419,6 +463,13 @@
 			  "SODIMM_44";
 };
 
+/* Verdin HDMI_1 */
+&hdmi_tx {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+};
+
 /* On-module I2C */
 &i2c1 {
 	clock-frequency = <400000>;
@@ -427,6 +478,7 @@
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
 	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
 	status = "okay";
 
 	pca9450: pmic@25 {
@@ -437,7 +489,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		reg = <0x25>;
-		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 
 		/*
 		 * The bootloader is expected to switch on LDO4 for the on-module +V3.3_ADC and the
@@ -454,7 +505,7 @@
 				regulator-ramp-delay = <3125>;
 			};
 
-			BUCK2 {
+			reg_vdd_arm: BUCK2 {
 				nxp,dvs-run-voltage = <950000>;
 				nxp,dvs-standby-voltage = <850000>;
 				regulator-always-on;
@@ -521,7 +572,7 @@
 				regulator-name = "On-module +V3.3_ADC (LDO4)";
 			};
 
-			LDO5 {
+			reg_vdd_sdio: LDO5 {
 				regulator-max-microvolt = <3300000>;
 				regulator-min-microvolt = <1800000>;
 				regulator-name = "On-module +V3.3_1.8_SD (LDO5)";
@@ -541,11 +592,12 @@
 		vs-supply = <&reg_vdd_1v8>;
 	};
 
-	adc@49 {
+	verdin_som_adc: adc@49 {
 		compatible = "ti,ads1015";
 		reg = <0x49>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		#io-channel-cells = <1>;
 
 		/* Verdin I2C_1 (ADC_4 - ADC_3) */
 		channel@0 {
@@ -605,7 +657,7 @@
 	};
 
 	eeprom@50 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 	};
@@ -613,13 +665,13 @@
 
 /* Verdin I2C_2_DSI */
 &i2c2 {
-	/* Lower frequency to avoid DDC/EDID issues with certain displays/screens. */
-	clock-frequency = <10000>;
+	clock-frequency = <400000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	pinctrl-1 = <&pinctrl_i2c2_gpio>;
 	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
 
 	atmel_mxt_ts_mezzanine: touch-mezzanine@4a {
 		compatible = "atmel,maxtouch";
@@ -628,13 +680,11 @@
 		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 		reg = <0x4a>;
 		/* Verdin GPIO_2 (SODIMM 208) */
-		reset-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 		status = "disabled";
 	};
 };
 
-/* TODO: Verdin I2C_3_HDMI */
-
 /* Verdin I2C_4_CSI */
 &i2c3 {
 	clock-frequency = <400000>;
@@ -643,6 +693,7 @@
 	pinctrl-1 = <&pinctrl_i2c3_gpio>;
 	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
 };
 
 /* Verdin I2C_1 */
@@ -653,6 +704,7 @@
 	pinctrl-1 = <&pinctrl_i2c4_gpio>;
 	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
 
 	gpio_expander_21: gpio-expander@21 {
 		compatible = "nxp,pcal6416";
@@ -663,8 +715,8 @@
 		status = "disabled";
 	};
 
-	lvds_ti_sn65dsi83: bridge@2c {
-		compatible = "ti,sn65dsi83";
+	lvds_ti_sn65dsi84: bridge@2c {
+		compatible = "ti,sn65dsi84";
 		/* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */
 		/* Verdin GPIO_10_DSI (SODIMM 21) */
 		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
@@ -697,7 +749,7 @@
 		compatible = "atmel,maxtouch";
 		/*
 		 * Verdin GPIO_9_DSI
-		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused)
+		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI84 IRQ albeit currently unused)
 		 */
 		interrupt-parent = <&gpio4>;
 		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
@@ -705,7 +757,7 @@
 		pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>;
 		reg = <0x4a>;
 		/* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */
-		reset-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 		status = "disabled";
 	};
 
@@ -718,7 +770,7 @@
 
 	/* EEPROM on display adapter (MIPI DSI Display Adapter) */
 	eeprom_display_adapter: eeprom@50 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 		status = "disabled";
@@ -726,14 +778,38 @@
 
 	/* EEPROM on carrier board */
 	eeprom_carrier_board: eeprom@57 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x57>;
 		status = "disabled";
 	};
 };
 
-/* TODO: Verdin PCIE_1 */
+/* Verdin I2C_3_HDMI */
+&i2c5 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	/* PCIE_1_RESET# (SODIMM 244) */
+	reset-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+};
 
 /* Verdin PWM_1 */
 &pwm1 {
@@ -791,28 +867,40 @@
 };
 
 /* Verdin USB_1 */
-&usb3_phy0 {
-	vbus-supply = <&reg_usb1_vbus>;
+&usb3_0 {
+	fsl,disable-port-power-control;
+	fsl,over-current-active-low;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_1_oc_n>;
 };
 
 &usb_dwc3_0 {
+	/* dual role only, not full featured OTG */
 	adp-disable;
 	dr_mode = "otg";
 	hnp-disable;
 	maximum-speed = "high-speed";
-	over-current-active-low;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_1_id>;
+	role-switch-default-mode = "peripheral";
 	srp-disable;
+	usb-role-switch;
+
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
 };
 
 /* Verdin USB_2 */
+&usb3_1 {
+	fsl,disable-port-power-control;
+};
+
 &usb3_phy1 {
 	vbus-supply = <&reg_usb2_vbus>;
 };
 
 &usb_dwc3_1 {
-	disable-over-current;
 	dr_mode = "host";
 };
 
@@ -829,6 +917,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
 	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_vdd_sdio>;
 };
 
 /* On-module eMMC */
@@ -1030,7 +1119,6 @@
 
 	pinctrl_gpio_hog3: gpiohog3grp {
 		fsl,pins =
-			<MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x1c4>,	/* SODIMM 157 */
 			/* CSI_1_MCLK */
 			<MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x1c4>;	/* SODIMM 91 */
 	};
@@ -1047,12 +1135,10 @@
 			<MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x1c4>;	/* SODIMM 252 */
 	};
 
-	pinctrl_hdmi_hog: hdmihoggrp {
+	pinctrl_hdmi: hdmigrp {
 		fsl,pins =
-			<MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x40000019>,	/* SODIMM 63 */
-			<MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3>,	/* SODIMM 59 */
-			<MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3>,	/* SODIMM 57 */
-			<MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x40000019>;	/* SODIMM 61 */
+			<MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x140>,	/* SODIMM 63 */
+			<MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x180>;	/* SODIMM 61 */
 	};
 
 	/* On-module I2C */
@@ -1107,6 +1193,19 @@
 			<MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21		0x400001c6>;	/* SODIMM 12 */
 	};
 
+	/* Verdin I2C_3_HDMI */
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL		0x400001c6>,	/* SODIMM 59 */
+			<MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA		0x400001c6>;	/* SODIMM 57 */
+	};
+
+	pinctrl_i2c5_gpio: i2c5gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26		0x400001c6>,	/* SODIMM 59 */
+			<MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27		0x400001c6>;	/* SODIMM 57 */
+	};
+
 	/* Verdin I2S_2_BCLK (TOUCH_RESET#) */
 	pinctrl_i2s_2_bclk_touch_reset: i2s2bclktouchresetgrp {
 		fsl,pins =
@@ -1205,7 +1304,7 @@
 
 	pinctrl_usb1_vbus: usb1vbusgrp {
 		fsl,pins =
-			<MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR		0x19>;	/* SODIMM 155 */
+			<MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x106>;	/* SODIMM 155 */
 	};
 
 	/* USB_1_ID */
@@ -1214,9 +1313,15 @@
 			<MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x1c4>;	/* SODIMM 161 */
 	};
 
+	/* USB_1_OC# */
+	pinctrl_usb_1_oc_n: usb1ocngrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC		0x1c4>;	/* SODIMM 157 */
+	};
+
 	pinctrl_usb2_vbus: usb2vbusgrp {
 		fsl,pins =
-			<MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR		0x19>;	/* SODIMM 185 */
+			<MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x106>;	/* SODIMM 185 */
 	};
 
 	/* On-module Wi-Fi */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index fe178b7d063c..a3de6604e29f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -5,8 +5,11 @@
 
 #include <dt-bindings/clock/imx8mp-clock.h>
 #include <dt-bindings/power/imx8mp-power.h>
+#include <dt-bindings/reset/imx8mp-reset.h>
+#include <dt-bindings/reset/imx8mp-reset-audiomix.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interconnect/fsl,imx8mp.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
 
@@ -45,11 +48,24 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+				wakeup-latency-us = <1500>;
+			};
+		};
+
 		A53_0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -63,13 +79,13 @@
 			nvmem-cell-names = "speed_grade";
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
 		};
 
 		A53_1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -81,13 +97,13 @@
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
 		};
 
 		A53_2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -99,13 +115,13 @@
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
 		};
 
 		A53_3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -117,10 +133,12 @@
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
 		};
 
 		A53_L2: l2-cache0 {
 			compatible = "cache";
+			cache-unified;
 			cache-level = <2>;
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
@@ -199,14 +217,69 @@
 		clock-output-names = "clk_ext4";
 	};
 
+	funnel {
+		/*
+		 * non-configurable funnel don't show up on the AMBA
+		 * bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-funnel";
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				ca_funnel_in_port0: endpoint {
+					remote-endpoint = <&etm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				ca_funnel_in_port1: endpoint {
+					remote-endpoint = <&etm1_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				ca_funnel_in_port2: endpoint {
+					remote-endpoint = <&etm2_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+					ca_funnel_in_port3: endpoint {
+					remote-endpoint = <&etm3_out_port>;
+				};
+			};
+		};
+
+		out-ports {
+			port {
+
+				ca_funnel_out_port0: endpoint {
+					remote-endpoint = <&hugo_funnel_in_port0>;
+				};
+			};
+		};
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
 		dsp_reserved: dsp@92400000 {
-			reg = <0 0x92400000 0 0x2000000>;
+			reg = <0 0x92400000 0 0x1000000>;
 			no-map;
+			status = "disabled";
 		};
 	};
 
@@ -225,7 +298,7 @@
 		cpu-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <2000>;
-			thermal-sensors = <&tmu 0>;
+			thermal-sensors = <&tmu 1>;
 			trips {
 				cpu_alert0: trip0 {
 					temperature = <85000>;
@@ -247,7 +320,10 @@
 						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&gpu3d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&gpu2d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -255,7 +331,7 @@
 		soc-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <2000>;
-			thermal-sensors = <&tmu 1>;
+			thermal-sensors = <&tmu 0>;
 			trips {
 				soc_alert0: trip0 {
 					temperature = <85000>;
@@ -277,7 +353,10 @@
 						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&gpu3d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&gpu2d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -301,6 +380,153 @@
 		nvmem-cells = <&imx8mp_uid>;
 		nvmem-cell-names = "soc_unique_id";
 
+		etm0: etm@28440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28440000 0x1000>;
+			cpu = <&A53_0>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm0_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm1: etm@28540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28540000 0x1000>;
+			cpu = <&A53_1>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm2: etm@28640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28640000 0x1000>;
+			cpu = <&A53_2>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm2_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm3: etm@28740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28740000 0x1000>;
+			cpu = <&A53_3>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm3_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port3>;
+					};
+				};
+			};
+		};
+
+		funnel@28c03000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x28c03000 0x1000>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					hugo_funnel_in_port0: endpoint {
+						remote-endpoint = <&ca_funnel_out_port0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					hugo_funnel_in_port1: endpoint {
+					/* M7 input */
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					hugo_funnel_in_port2: endpoint {
+					/* DSP input */
+					};
+				};
+				/* the other input ports are not connect to anything */
+			};
+
+			out-ports {
+				port {
+					hugo_funnel_out_port0: endpoint {
+						remote-endpoint = <&etf_in_port>;
+					};
+				};
+			};
+		};
+
+		etf@28c04000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x28c04000 0x1000>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etf_in_port: endpoint {
+						remote-endpoint = <&hugo_funnel_out_port0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out_port: endpoint {
+						remote-endpoint = <&etr_in_port>;
+					};
+				};
+			};
+		};
+
+		etr@28c06000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x28c06000 0x1000>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etr_in_port: endpoint {
+						remote-endpoint = <&etf_out_port>;
+					};
+				};
+			};
+		};
+
 		aips1: bus@30000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x30000000 0x400000>;
@@ -377,6 +603,8 @@
 				compatible = "fsl,imx8mp-tmu";
 				reg = <0x30260000 0x10000>;
 				clocks = <&clk IMX8MP_CLK_TSENSOR_ROOT>;
+				nvmem-cells = <&tmu_calib>;
+				nvmem-cell-names = "calib";
 				#thermal-sensor-cells = <1>;
 			};
 
@@ -404,12 +632,36 @@
 				status = "disabled";
 			};
 
+			gpt1: timer@302d0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x302d0000 0x10000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT1_ROOT>, <&clk IMX8MP_CLK_GPT1>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt2: timer@302e0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x302e0000 0x10000>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT2_ROOT>, <&clk IMX8MP_CLK_GPT2>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt3: timer@302f0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x302f0000 0x10000>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT3_ROOT>, <&clk IMX8MP_CLK_GPT3>;
+				clock-names = "ipg", "per";
+			};
+
 			iomuxc: pinctrl@30330000 {
 				compatible = "fsl,imx8mp-iomuxc";
 				reg = <0x30330000 0x10000>;
 			};
 
-			gpr: iomuxc-gpr@30340000 {
+			gpr: syscon@30340000 {
 				compatible = "fsl,imx8mp-iomuxc-gpr", "syscon";
 				reg = <0x30340000 0x10000>;
 			};
@@ -422,27 +674,44 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mp_uid: unique-id@420 {
+				/*
+				 * The register address below maps to the MX8M
+				 * Fusemap Description Table entries this way.
+				 * Assuming
+				 *   reg = <ADDR SIZE>;
+				 * then
+				 *   Fuse Address = (ADDR * 4) + 0x400
+				 * Note that if SIZE is greater than 4, then
+				 * each subsequent fuse is located at offset
+				 * +0x10 in Fusemap Description Table (e.g.
+				 * reg = <0x8 0x8> describes fuses 0x420 and
+				 * 0x430).
+				 */
+				imx8mp_uid: unique-id@8 { /* 0x420-0x430 */
 					reg = <0x8 0x8>;
 				};
 
-				cpu_speed_grade: speed-grade@10 {
+				cpu_speed_grade: speed-grade@10 { /* 0x440 */
 					reg = <0x10 4>;
 				};
 
-				eth_mac1: mac-address@90 {
+				eth_mac1: mac-address@90 { /* 0x640 */
 					reg = <0x90 6>;
 				};
 
-				eth_mac2: mac-address@96 {
+				eth_mac2: mac-address@96 { /* 0x658 */
 					reg = <0x96 6>;
 				};
+
+				tmu_calib: calib@264 { /* 0xd90-0xdc0 */
+					reg = <0x264 0x10>;
+				};
 			};
 
-			anatop: anatop@30360000 {
-				compatible = "fsl,imx8mp-anatop", "fsl,imx8mm-anatop",
-					     "syscon";
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mp-anatop", "fsl,imx8mm-anatop";
 				reg = <0x30360000 0x10000>;
+				#clock-cells = <1>;
 			};
 
 			snvs: snvs@30370000 {
@@ -451,7 +720,7 @@
 
 				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					regmap =<&snvs>;
+					regmap = <&snvs>;
 					offset = <0x34>;
 					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
@@ -469,11 +738,18 @@
 					wakeup-source;
 					status = "disabled";
 				};
+
+				snvs_lpgpr: snvs-lpgpr {
+					compatible = "fsl,imx8mp-snvs-lpgpr",
+						     "fsl,imx7d-snvs-lpgpr";
+				};
 			};
 
 			clk: clock-controller@30380000 {
 				compatible = "fsl,imx8mp-ccm";
 				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 					 <&clk_ext3>, <&clk_ext4>;
@@ -483,26 +759,16 @@
 						  <&clk IMX8MP_CLK_A53_CORE>,
 						  <&clk IMX8MP_CLK_NOC>,
 						  <&clk IMX8MP_CLK_NOC_IO>,
-						  <&clk IMX8MP_CLK_GIC>,
-						  <&clk IMX8MP_CLK_AUDIO_AHB>,
-						  <&clk IMX8MP_CLK_AUDIO_AXI_SRC>,
-						  <&clk IMX8MP_AUDIO_PLL1>,
-						  <&clk IMX8MP_AUDIO_PLL2>;
+						  <&clk IMX8MP_CLK_GIC>;
 				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
 							 <&clk IMX8MP_ARM_PLL_OUT>,
 							 <&clk IMX8MP_SYS_PLL2_1000M>,
 							 <&clk IMX8MP_SYS_PLL1_800M>,
-							 <&clk IMX8MP_SYS_PLL2_500M>,
-							 <&clk IMX8MP_SYS_PLL1_800M>,
-							 <&clk IMX8MP_SYS_PLL1_800M>;
+							 <&clk IMX8MP_SYS_PLL2_500M>;
 				assigned-clock-rates = <0>, <0>,
 						       <1000000000>,
 						       <800000000>,
-						       <500000000>,
-						       <400000000>,
-						       <800000000>,
-						       <393216000>,
-						       <361267200>;
+						       <500000000>;
 			};
 
 			src: reset-controller@30390000 {
@@ -516,6 +782,7 @@
 				compatible = "fsl,imx8mp-gpc";
 				reg = <0x303a0000 0x1000>;
 				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <3>;
 
@@ -543,6 +810,36 @@
 						reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>;
 					};
 
+					pgc_mlmix: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MLMIX>;
+						clocks = <&clk IMX8MP_CLK_ML_AXI>,
+							 <&clk IMX8MP_CLK_ML_AHB>,
+							 <&clk IMX8MP_CLK_NPU_ROOT>;
+						assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>,
+								  <&clk IMX8MP_CLK_ML_AXI>,
+								  <&clk IMX8MP_CLK_ML_AHB>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-rates = <1000000000>,
+								       <800000000>,
+								       <400000000>;
+					};
+
+					pgc_audio: power-domain@5 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_AUDIOMIX>;
+						clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
+							 <&clk IMX8MP_CLK_AUDIO_AXI>;
+						assigned-clocks = <&clk IMX8MP_CLK_AUDIO_AHB>,
+								  <&clk IMX8MP_CLK_AUDIO_AXI_SRC>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-rates = <400000000>,
+								       <800000000>;
+					};
+
 					pgc_gpu2d: power-domain@6 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_GPU2D>;
@@ -562,6 +859,12 @@
 						assigned-clock-rates = <800000000>, <400000000>;
 					};
 
+					pgc_vpumix: power-domain@8 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_VPUMIX>;
+						clocks = <&clk IMX8MP_CLK_VPU_ROOT>;
+					};
+
 					pgc_gpu3d: power-domain@9 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_GPU3D>;
@@ -577,12 +880,44 @@
 							 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
 					};
 
+					pgc_vpu_g1: power-domain@11 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_G1>;
+					};
+
+					pgc_vpu_g2: power-domain@12 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_G2>;
+					};
+
+					pgc_vpu_vc8000e: power-domain@13 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
+					};
+
+					pgc_hdmimix: power-domain@14 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_HDMIMIX>;
+						clocks = <&clk IMX8MP_CLK_HDMI_ROOT>,
+							 <&clk IMX8MP_CLK_HDMI_APB>;
+						assigned-clocks = <&clk IMX8MP_CLK_HDMI_AXI>,
+								  <&clk IMX8MP_CLK_HDMI_APB>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>,
+									 <&clk IMX8MP_SYS_PLL1_133M>;
+						assigned-clock-rates = <500000000>, <133000000>;
+					};
+
+					pgc_hdmi_phy: power-domain@15 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_HDMI_PHY>;
+					};
+
 					pgc_mipi_phy2: power-domain@16 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>;
 					};
 
-					pgc_hsiomix: power-domains@17 {
+					pgc_hsiomix: power-domain@17 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
 						clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
@@ -659,6 +994,30 @@
 				clocks = <&osc_24m>;
 				clock-names = "per";
 			};
+
+			gpt6: timer@306e0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x306e0000 0x10000>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT6_ROOT>, <&clk IMX8MP_CLK_GPT6>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt5: timer@306f0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x306f0000 0x10000>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT5_ROOT>, <&clk IMX8MP_CLK_GPT5>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt4: timer@30700000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x30700000 0x10000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT4_ROOT>, <&clk IMX8MP_CLK_GPT4>;
+				clock-names = "ipg", "per";
+			};
 		};
 
 		aips3: bus@30800000 {
@@ -668,112 +1027,129 @@
 			#size-cells = <1>;
 			ranges;
 
-			ecspi1: spi@30820000 {
+			spba-bus@30800000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				reg = <0x30800000 0x100000>;
 				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
-				reg = <0x30820000 0x10000>;
-				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>,
-					 <&clk IMX8MP_CLK_ECSPI1_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				#size-cells = <1>;
+				ranges;
 
-			ecspi2: spi@30830000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
-				reg = <0x30830000 0x10000>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>,
-					 <&clk IMX8MP_CLK_ECSPI2_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				ecspi1: spi@30820000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
+					reg = <0x30820000 0x10000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>,
+						 <&clk IMX8MP_CLK_ECSPI1_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clock-rates = <80000000>;
+					assigned-clocks = <&clk IMX8MP_CLK_ECSPI1>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+					dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			ecspi3: spi@30840000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
-				reg = <0x30840000 0x10000>;
-				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>,
-					 <&clk IMX8MP_CLK_ECSPI3_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				ecspi2: spi@30830000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
+					reg = <0x30830000 0x10000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>,
+						 <&clk IMX8MP_CLK_ECSPI2_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clock-rates = <80000000>;
+					assigned-clocks = <&clk IMX8MP_CLK_ECSPI2>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+					dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			uart1: serial@30860000 {
-				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
-				reg = <0x30860000 0x10000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_UART1_ROOT>,
-					 <&clk IMX8MP_CLK_UART1_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				ecspi3: spi@30840000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
+					reg = <0x30840000 0x10000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>,
+						 <&clk IMX8MP_CLK_ECSPI3_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clock-rates = <80000000>;
+					assigned-clocks = <&clk IMX8MP_CLK_ECSPI3>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+					dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			uart3: serial@30880000 {
-				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
-				reg = <0x30880000 0x10000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_UART3_ROOT>,
-					 <&clk IMX8MP_CLK_UART3_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				uart1: serial@30860000 {
+					compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+					reg = <0x30860000 0x10000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_UART1_ROOT>,
+						 <&clk IMX8MP_CLK_UART1_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			uart2: serial@30890000 {
-				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
-				reg = <0x30890000 0x10000>;
-				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_UART2_ROOT>,
-					 <&clk IMX8MP_CLK_UART2_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				uart3: serial@30880000 {
+					compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+					reg = <0x30880000 0x10000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_UART3_ROOT>,
+						 <&clk IMX8MP_CLK_UART3_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			flexcan1: can@308c0000 {
-				compatible = "fsl,imx8mp-flexcan";
-				reg = <0x308c0000 0x10000>;
-				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
-					 <&clk IMX8MP_CLK_CAN1_ROOT>;
-				clock-names = "ipg", "per";
-				assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
-				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
-				assigned-clock-rates = <40000000>;
-				fsl,clk-source = /bits/ 8 <0>;
-				fsl,stop-mode = <&gpr 0x10 4>;
-				status = "disabled";
-			};
+				uart2: serial@30890000 {
+					compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+					reg = <0x30890000 0x10000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_UART2_ROOT>,
+						 <&clk IMX8MP_CLK_UART2_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			flexcan2: can@308d0000 {
-				compatible = "fsl,imx8mp-flexcan";
-				reg = <0x308d0000 0x10000>;
-				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
-					 <&clk IMX8MP_CLK_CAN2_ROOT>;
-				clock-names = "ipg", "per";
-				assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
-				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
-				assigned-clock-rates = <40000000>;
-				fsl,clk-source = /bits/ 8 <0>;
-				fsl,stop-mode = <&gpr 0x10 5>;
-				status = "disabled";
+				flexcan1: can@308c0000 {
+					compatible = "fsl,imx8mp-flexcan";
+					reg = <0x308c0000 0x10000>;
+					interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
+						 <&clk IMX8MP_CLK_CAN1_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
+					assigned-clock-rates = <40000000>;
+					fsl,clk-source = /bits/ 8 <0>;
+					fsl,stop-mode = <&gpr 0x10 4>;
+					status = "disabled";
+				};
+
+				flexcan2: can@308d0000 {
+					compatible = "fsl,imx8mp-flexcan";
+					reg = <0x308d0000 0x10000>;
+					interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
+						 <&clk IMX8MP_CLK_CAN2_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
+					assigned-clock-rates = <40000000>;
+					fsl,clk-source = /bits/ 8 <0>;
+					fsl,stop-mode = <&gpr 0x10 5>;
+					status = "disabled";
+				};
 			};
 
 			crypto: crypto@30900000 {
@@ -872,6 +1248,7 @@
 				reg = <0x30e60000 0x10000>;
 				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 				#mbox-cells = <2>;
+				clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_MU2_ROOT>;
 				status = "disabled";
 			};
 
@@ -899,7 +1276,7 @@
 				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_DUMMY>,
+				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
 					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MP_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -913,7 +1290,7 @@
 				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_DUMMY>,
+				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
 					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MP_CLK_USDHC2_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -927,7 +1304,7 @@
 				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_DUMMY>,
+				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
 					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MP_CLK_USDHC3_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -1019,6 +1396,238 @@
 			};
 		};
 
+		aips5: bus@30c00000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			spba-bus@30c00000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				reg = <0x30c00000 0x100000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				sai1: sai@30c10000 {
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c10000 0x10000>;
+					#sound-dai-cells = <0>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+					dma-names = "rx", "tx";
+					interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sai2: sai@30c20000 {
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c20000 0x10000>;
+					#sound-dai-cells = <0>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+					dma-names = "rx", "tx";
+					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sai3: sai@30c30000 {
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c30000 0x10000>;
+					#sound-dai-cells = <0>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+					dma-names = "rx", "tx";
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sai5: sai@30c50000 {
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c50000 0x10000>;
+					#sound-dai-cells = <0>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+					dma-names = "rx", "tx";
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sai6: sai@30c60000 {
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c60000 0x10000>;
+					#sound-dai-cells = <0>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+					dma-names = "rx", "tx";
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sai7: sai@30c80000 {
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c80000 0x10000>;
+					#sound-dai-cells = <0>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 12 2 0>, <&sdma2 13 2 0>;
+					dma-names = "rx", "tx";
+					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				easrc: easrc@30c90000 {
+					compatible = "fsl,imx8mp-easrc", "fsl,imx8mn-easrc";
+					reg = <0x30c90000 0x10000>;
+					interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_ASRC_IPG>;
+					clock-names = "mem";
+					dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
+					       <&sdma2 18 23 0> , <&sdma2 19 23 0>,
+					       <&sdma2 20 23 0> , <&sdma2 21 23 0>,
+					       <&sdma2 22 23 0> , <&sdma2 23 23 0>;
+					dma-names = "ctx0_rx", "ctx0_tx",
+						    "ctx1_rx", "ctx1_tx",
+						    "ctx2_rx", "ctx2_tx",
+						    "ctx3_rx", "ctx3_tx";
+					firmware-name = "imx/easrc/easrc-imx8mn.bin";
+					fsl,asrc-rate = <8000>;
+					fsl,asrc-format = <2>;
+					status = "disabled";
+				};
+
+				micfil: audio-controller@30ca0000 {
+					compatible = "fsl,imx8mp-micfil";
+					reg = <0x30ca0000 0x10000>;
+					#sound-dai-cells = <0>;
+					interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_PDM_IPG>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_PDM_SEL>,
+						 <&clk IMX8MP_AUDIO_PLL1_OUT>,
+						 <&clk IMX8MP_AUDIO_PLL2_OUT>,
+						 <&clk IMX8MP_CLK_EXT3>;
+					clock-names = "ipg_clk", "ipg_clk_app",
+						      "pll8k", "pll11k", "clkext3";
+					dmas = <&sdma2 24 25 0x80000000>;
+					dma-names = "rx";
+					status = "disabled";
+				};
+
+				aud2htx: aud2htx@30cb0000 {
+					compatible = "fsl,imx8mp-aud2htx";
+					reg = <0x30cb0000 0x10000>;
+					interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_AUD2HTX_IPG>;
+					clock-names = "bus";
+					dmas = <&sdma2 26 2 0>;
+					dma-names = "tx";
+					status = "disabled";
+				};
+
+				xcvr: xcvr@30cc0000 {
+					compatible = "fsl,imx8mp-xcvr";
+					reg = <0x30cc0000 0x800>,
+					      <0x30cc0800 0x400>,
+					      <0x30cc0c00 0x080>,
+					      <0x30cc0e00 0x080>;
+					reg-names = "ram", "regs", "rxfifo",
+						    "txfifo";
+					interrupts = /* XCVR IRQ 0 */
+						     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+						     /* XCVR IRQ 1 */
+						     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+						     /* XCVR PHY - SPDIF wakeup IRQ */
+						     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_EARC_IPG>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_EARC_PHY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_AUDPLL_ROOT>;
+					clock-names = "ipg", "phy", "spba", "pll_ipg";
+					dmas = <&sdma2 30 2 0>, <&sdma2 31 2 0>;
+					dma-names = "rx", "tx";
+					resets = <&audio_blk_ctrl 0>;
+					status = "disabled";
+				};
+			};
+
+			sdma3: dma-controller@30e00000 {
+				compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30e00000 0x10000>;
+				#dma-cells = <3>;
+				clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT>,
+					 <&clk IMX8MP_CLK_AUDIO_ROOT>;
+				clock-names = "ipg", "ahb";
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			sdma2: dma-controller@30e10000 {
+				compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30e10000 0x10000>;
+				#dma-cells = <3>;
+				clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT>,
+					 <&clk IMX8MP_CLK_AUDIO_ROOT>;
+				clock-names = "ipg", "ahb";
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			audio_blk_ctrl: clock-controller@30e20000 {
+				compatible = "fsl,imx8mp-audio-blk-ctrl";
+				reg = <0x30e20000 0x10000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+				clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
+					 <&clk IMX8MP_CLK_SAI1>,
+					 <&clk IMX8MP_CLK_SAI2>,
+					 <&clk IMX8MP_CLK_SAI3>,
+					 <&clk IMX8MP_CLK_SAI5>,
+					 <&clk IMX8MP_CLK_SAI6>,
+					 <&clk IMX8MP_CLK_SAI7>,
+					 <&clk IMX8MP_CLK_AUDIO_AXI_ROOT>;
+				clock-names = "ahb",
+					      "sai1", "sai2", "sai3",
+					      "sai5", "sai6", "sai7", "axi";
+				power-domains = <&pgc_audio>;
+				assigned-clocks = <&clk IMX8MP_AUDIO_PLL1>,
+						  <&clk IMX8MP_AUDIO_PLL2>;
+				assigned-clock-rates = <393216000>, <361267200>;
+			};
+		};
+
 		noc: interconnect@32700000 {
 			compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc";
 			reg = <0x32700000 0x100000>;
@@ -1029,11 +1638,17 @@
 			noc_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
-				opp-200M {
+				opp-200000000 {
 					opp-hz = /bits/ 64 <200000000>;
 				};
 
-				opp-1000M {
+				/* Nominal drive mode maximum */
+				opp-800000000 {
+					opp-hz = /bits/ 64 <800000000>;
+				};
+
+				/* Overdrive mode maximum */
+				opp-1000000000 {
 					opp-hz = /bits/ 64 <1000000000>;
 				};
 			};
@@ -1046,10 +1661,249 @@
 			#size-cells = <1>;
 			ranges;
 
+			isi_0: isi@32e00000 {
+				compatible = "fsl,imx8mp-isi";
+				reg = <0x32e00000 0x4000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+				clock-names = "axi", "apb";
+				fsl,blk-ctrl = <&media_blk_ctrl>;
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						isi_in_0: endpoint {
+							remote-endpoint = <&mipi_csi_0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						isi_in_1: endpoint {
+							remote-endpoint = <&mipi_csi_1_out>;
+						};
+					};
+				};
+			};
+
+			isp_0: isp@32e10000 {
+				compatible = "fsl,imx8mp-isp";
+				reg = <0x32e10000 0x10000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>;
+				clock-names = "isp", "aclk", "hclk", "pclk";
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>,
+						<&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
+				power-domain-names = "isp", "csi2";
+				fsl,blk-ctrl = <&media_blk_ctrl 0>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+			};
+
+			isp_1: isp@32e20000 {
+				compatible = "fsl,imx8mp-isp";
+				reg = <0x32e20000 0x10000>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>;
+				clock-names = "isp", "aclk", "hclk", "pclk";
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>,
+						<&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>;
+				power-domain-names = "isp", "csi2";
+				fsl,blk-ctrl = <&media_blk_ctrl 1>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+			};
+
+			dewarp: dwe@32e30000 {
+				compatible = "nxp,imx8mp-dw100";
+				reg = <0x32e30000 0x10000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+				clock-names = "axi", "ahb";
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_DWE>;
+			};
+
+			mipi_csi_0: csi@32e40000 {
+				compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2";
+				reg = <0x32e40000 0x10000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <250000000>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
+				clock-names = "pclk", "wrap", "phy", "axi";
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>,
+						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>,
+							 <&clk IMX8MP_CLK_24M>;
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_csi_0_out: endpoint {
+							remote-endpoint = <&isi_in_0>;
+						};
+					};
+				};
+			};
+
+			mipi_csi_1: csi@32e50000 {
+				compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2";
+				reg = <0x32e50000 0x10000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <250000000>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
+				clock-names = "pclk", "wrap", "phy", "axi";
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM2_PIX>,
+						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>,
+							 <&clk IMX8MP_CLK_24M>;
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_csi_1_out: endpoint {
+							remote-endpoint = <&isi_in_1>;
+						};
+					};
+				};
+			};
+
+			mipi_dsi: dsi@32e60000 {
+				compatible = "fsl,imx8mp-mipi-dsim";
+				reg = <0x32e60000 0x400>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
+				clock-names = "bus_clk", "sclk_mipi";
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_APB>,
+						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_CLK_24M>;
+				assigned-clock-rates = <200000000>, <24000000>;
+				samsung,pll-clock-frequency = <24000000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_DSI_1>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dsim_from_lcdif1: endpoint {
+							remote-endpoint = <&lcdif1_to_dsim>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_dsi_out: endpoint {
+						};
+					};
+				};
+			};
+
+			lcdif1: display-controller@32e80000 {
+				compatible = "fsl,imx8mp-lcdif";
+				reg = <0x32e80000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_1>;
+				status = "disabled";
+
+				port {
+					lcdif1_to_dsim: endpoint {
+						remote-endpoint = <&dsim_from_lcdif1>;
+					};
+				};
+			};
+
+			lcdif2: display-controller@32e90000 {
+				compatible = "fsl,imx8mp-lcdif";
+				reg = <0x32e90000 0x10000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_2>;
+				status = "disabled";
+
+				port {
+					lcdif2_to_ldb: endpoint {
+						remote-endpoint = <&ldb_from_lcdif2>;
+					};
+				};
+			};
+
 			media_blk_ctrl: blk-ctrl@32ec0000 {
 				compatible = "fsl,imx8mp-media-blk-ctrl",
 					     "syscon";
 				reg = <0x32ec0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
 				power-domains = <&pgc_mediamix>,
 						<&pgc_mipi_phy1>,
 						<&pgc_mipi_phy1>,
@@ -1064,6 +1918,18 @@
 						     "lcdif1", "isi", "mipi-csi2",
 						     "lcdif2", "isp", "dwe",
 						     "mipi-dsi2";
+				interconnects =
+					<&noc IMX8MP_ICM_LCDIF_RD &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_LCDIF_WR &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISI0 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISI1 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISI2 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISP0 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISP1 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_DWE &noc IMX8MP_ICN_MEDIA>;
+				interconnect-names = "lcdif-rd", "lcdif-wr", "isi0",
+						     "isi1", "isi2", "isp0", "isp1",
+						     "dwe";
 				clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
@@ -1075,13 +1941,76 @@
 				clock-names = "apb", "axi", "cam1", "cam2",
 					      "disp1", "disp2", "isp", "phy";
 
+				/*
+				 * The ISP maximum frequency is 400MHz in normal mode
+				 * and 500MHz in overdrive mode. The 400MHz operating
+				 * point hasn't been successfully tested yet, so set
+				 * IMX8MP_CLK_MEDIA_ISP to 500MHz for the time being.
+				 */
 				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>,
-						  <&clk IMX8MP_CLK_MEDIA_APB>;
+						  <&clk IMX8MP_CLK_MEDIA_APB>,
+						  <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>,
+						  <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
+						  <&clk IMX8MP_CLK_MEDIA_ISP>,
+						  <&clk IMX8MP_VIDEO_PLL1>;
 				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
-							 <&clk IMX8MP_SYS_PLL1_800M>;
-				assigned-clock-rates = <500000000>, <200000000>;
-
+							 <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_VIDEO_PLL1_OUT>,
+							 <&clk IMX8MP_VIDEO_PLL1_OUT>,
+							 <&clk IMX8MP_SYS_PLL2_500M>;
+				assigned-clock-rates = <500000000>, <200000000>,
+						       <0>, <0>, <500000000>,
+						       <1039500000>;
 				#power-domain-cells = <1>;
+
+				lvds_bridge: bridge@5c {
+					compatible = "fsl,imx8mp-ldb";
+					reg = <0x5c 0x4>, <0x128 0x4>;
+					reg-names = "ldb", "lvds";
+					clocks = <&clk IMX8MP_CLK_MEDIA_LDB_ROOT>;
+					clock-names = "ldb";
+					assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+					assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							ldb_from_lcdif2: endpoint {
+								remote-endpoint = <&lcdif2_to_ldb>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							ldb_lvds_ch0: endpoint {
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							ldb_lvds_ch1: endpoint {
+							};
+						};
+					};
+				};
+			};
+
+			pcie_phy: pcie-phy@32f00000 {
+				compatible = "fsl,imx8mp-pcie-phy";
+				reg = <0x32f00000 0x10000>;
+				resets = <&src IMX8MP_RESET_PCIEPHY>,
+					 <&src IMX8MP_RESET_PCIEPHY_PERST>;
+				reset-names = "pciephy", "perst";
+				power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE_PHY>;
+				#phy-cells = <0>;
+				status = "disabled";
 			};
 
 			hsio_blk_ctrl: blk-ctrl@32f10000 {
@@ -1095,8 +2024,215 @@
 						<&pgc_hsiomix>, <&pgc_pcie_phy>;
 				power-domain-names = "bus", "usb", "usb-phy1",
 						     "usb-phy2", "pcie", "pcie-phy";
+				interconnects = <&noc IMX8MP_ICM_NOC_PCIE &noc IMX8MP_ICN_HSIO>,
+						<&noc IMX8MP_ICM_USB1 &noc IMX8MP_ICN_HSIO>,
+						<&noc IMX8MP_ICM_USB2 &noc IMX8MP_ICN_HSIO>,
+						<&noc IMX8MP_ICM_PCIE &noc IMX8MP_ICN_HSIO>;
+				interconnect-names = "noc-pcie", "usb1", "usb2", "pcie";
+				#power-domain-cells = <1>;
+				#clock-cells = <0>;
+			};
+
+			hdmi_blk_ctrl: blk-ctrl@32fc0000 {
+				compatible = "fsl,imx8mp-hdmi-blk-ctrl", "syscon";
+				reg = <0x32fc0000 0x1000>;
+				clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+					 <&clk IMX8MP_CLK_HDMI_ROOT>,
+					 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+					 <&clk IMX8MP_CLK_HDMI_24M>,
+					 <&clk IMX8MP_CLK_HDMI_FDCC_TST>;
+				clock-names = "apb", "axi", "ref_266m", "ref_24m", "fdcc";
+				power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>,
+						<&pgc_hdmimix>, <&pgc_hdmimix>,
+						<&pgc_hdmimix>, <&pgc_hdmimix>,
+						<&pgc_hdmimix>, <&pgc_hdmi_phy>,
+						<&pgc_hdmimix>, <&pgc_hdmimix>;
+				power-domain-names = "bus", "irqsteer", "lcdif",
+						     "pai", "pvi", "trng",
+						     "hdmi-tx", "hdmi-tx-phy",
+						     "hdcp", "hrv";
+				interconnects = <&noc IMX8MP_ICM_HRV &noc IMX8MP_ICN_HDMI>,
+						<&noc IMX8MP_ICM_LCDIF_HDMI &noc IMX8MP_ICN_HDMI>,
+						<&noc IMX8MP_ICM_HDCP &noc IMX8MP_ICN_HDMI>;
+				interconnect-names = "hrv", "lcdif-hdmi", "hdcp";
 				#power-domain-cells = <1>;
 			};
+
+			irqsteer_hdmi: interrupt-controller@32fc2000 {
+				compatible = "fsl,imx8mp-irqsteer", "fsl,imx-irqsteer";
+				reg = <0x32fc2000 0x1000>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				fsl,channel = <1>;
+				fsl,num-irqs = <64>;
+				clocks = <&clk IMX8MP_CLK_HDMI_APB>;
+				clock-names = "ipg";
+				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>;
+			};
+
+			hdmi_pvi: display-bridge@32fc4000 {
+				compatible = "fsl,imx8mp-hdmi-pvi";
+				reg = <0x32fc4000 0x1000>;
+				interrupt-parent = <&irqsteer_hdmi>;
+				interrupts = <12>;
+				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						pvi_from_lcdif3: endpoint {
+							remote-endpoint = <&lcdif3_to_pvi>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						pvi_to_hdmi_tx: endpoint {
+							remote-endpoint = <&hdmi_tx_from_pvi>;
+						};
+					};
+				};
+			};
+
+			lcdif3: display-controller@32fc6000 {
+				compatible = "fsl,imx8mp-lcdif";
+				reg = <0x32fc6000 0x1000>;
+				interrupt-parent = <&irqsteer_hdmi>;
+				interrupts = <8>;
+				clocks = <&hdmi_tx_phy>,
+					 <&clk IMX8MP_CLK_HDMI_APB>,
+					 <&clk IMX8MP_CLK_HDMI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_LCDIF>;
+				status = "disabled";
+
+				port {
+					lcdif3_to_pvi: endpoint {
+						remote-endpoint = <&pvi_from_lcdif3>;
+					};
+				};
+			};
+
+			hdmi_tx: hdmi@32fd8000 {
+				compatible = "fsl,imx8mp-hdmi-tx";
+				reg = <0x32fd8000 0x7eff>;
+				interrupt-parent = <&irqsteer_hdmi>;
+				interrupts = <0>;
+				clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+					 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+					 <&clk IMX8MP_CLK_32K>,
+					 <&hdmi_tx_phy>;
+				clock-names = "iahb", "isfr", "cec", "pix";
+				assigned-clocks = <&clk IMX8MP_CLK_HDMI_REF_266M>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>;
+				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
+				reg-io-width = <1>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						hdmi_tx_from_pvi: endpoint {
+							remote-endpoint = <&pvi_to_hdmi_tx>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						/* Point endpoint to the HDMI connector */
+					};
+				};
+			};
+
+			hdmi_tx_phy: phy@32fdff00 {
+				compatible = "fsl,imx8mp-hdmi-phy";
+				reg = <0x32fdff00 0x100>;
+				clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+					 <&clk IMX8MP_CLK_HDMI_24M>;
+				clock-names = "apb", "ref";
+				assigned-clocks = <&clk IMX8MP_CLK_HDMI_24M>;
+				assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		pcie0: pcie: pcie@33800000 {
+			compatible = "fsl,imx8mp-pcie";
+			reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
+			reg-names = "dbi", "config";
+			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+				 <&clk IMX8MP_CLK_HSIO_AXI>,
+				 <&clk IMX8MP_CLK_PCIE_ROOT>;
+			clock-names = "pcie", "pcie_bus", "pcie_aux";
+			assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+			assigned-clock-rates = <10000000>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
+				 <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			num-viewport = <4>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,max-link-speed = <3>;
+			linux,pci-domain = <0>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>;
+			resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "apps", "turnoff";
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			status = "disabled";
+		};
+
+		pcie0_ep: pcie_ep: pcie-ep@33800000 {
+			compatible = "fsl,imx8mp-pcie-ep";
+			reg = <0x33800000 0x100000>,
+			      <0x18000000 0x8000000>,
+			      <0x33900000 0x100000>,
+			      <0x33b00000 0x100000>;
+			reg-names = "dbi", "addr_space", "dbi2", "atu";
+			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+				 <&clk IMX8MP_CLK_HSIO_AXI>,
+				 <&clk IMX8MP_CLK_PCIE_ROOT>;
+			clock-names = "pcie", "pcie_bus", "pcie_aux";
+			assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+			assigned-clock-rates = <10000000>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* eDMA */
+			interrupt-names = "dma";
+			fsl,max-link-speed = <3>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>;
+			resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "apps", "turnoff";
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			num-ib-windows = <4>;
+			num-ob-windows = <4>;
+			status = "disabled";
 		};
 
 		gpu3d: gpu@38000000 {
@@ -1108,11 +2244,12 @@
 				 <&clk IMX8MP_CLK_GPU_ROOT>,
 				 <&clk IMX8MP_CLK_GPU_AHB>;
 			clock-names = "core", "shader", "bus", "reg";
+			#cooling-cells = <2>;
 			assigned-clocks = <&clk IMX8MP_CLK_GPU3D_CORE>,
 					  <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>;
-			assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
-						 <&clk IMX8MP_SYS_PLL1_800M>;
-			assigned-clock-rates = <800000000>, <800000000>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
+						 <&clk IMX8MP_SYS_PLL2_1000M>;
+			assigned-clock-rates = <1000000000>, <1000000000>;
 			power-domains = <&pgc_gpu3d>;
 		};
 
@@ -1124,16 +2261,73 @@
 				 <&clk IMX8MP_CLK_GPU_ROOT>,
 				 <&clk IMX8MP_CLK_GPU_AHB>;
 			clock-names = "core", "bus", "reg";
+			#cooling-cells = <2>;
 			assigned-clocks = <&clk IMX8MP_CLK_GPU2D_CORE>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+			assigned-clock-rates = <1000000000>;
+			power-domains = <&pgc_gpu2d>;
+		};
+
+		vpu_g1: video-codec@38300000 {
+			compatible = "nxp,imx8mm-vpu-g1";
+			reg = <0x38300000 0x10000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>;
 			assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
 			assigned-clock-rates = <800000000>;
-			power-domains = <&pgc_gpu2d>;
+			power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G1>;
+		};
+
+		vpu_g2: video-codec@38310000 {
+			compatible = "nxp,imx8mq-vpu-g2";
+			reg = <0x38310000 0x10000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>, <&clk IMX8MP_VPU_PLL_OUT>;
+			assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
+			assigned-clock-rates = <700000000>, <700000000>;
+			power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G2>;
+		};
+
+		vpumix_blk_ctrl: blk-ctrl@38330000 {
+			compatible = "fsl,imx8mp-vpu-blk-ctrl", "syscon";
+			reg = <0x38330000 0x100>;
+			#power-domain-cells = <1>;
+			power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
+					<&pgc_vpu_g2>, <&pgc_vpu_vc8000e>;
+			power-domain-names = "bus", "g1", "g2", "vc8000e";
+			clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>,
+				 <&clk IMX8MP_CLK_VPU_G2_ROOT>,
+				 <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
+			clock-names = "g1", "g2", "vc8000e";
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+			assigned-clock-rates = <800000000>;
+			interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>,
+					<&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>,
+					<&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>;
+			interconnect-names = "g1", "g2", "vc8000e";
+		};
+
+		npu: npu@38500000 {
+			compatible = "vivante,gc";
+			reg = <0x38500000 0x200000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_NPU_ROOT>,
+				 <&clk IMX8MP_CLK_NPU_ROOT>,
+				 <&clk IMX8MP_CLK_ML_AXI>,
+				 <&clk IMX8MP_CLK_ML_AHB>;
+			clock-names = "core", "shader", "bus", "reg";
+			#cooling-cells = <2>;
+			power-domains = <&pgc_mlmix>;
 		};
 
 		gic: interrupt-controller@38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,
 			      <0x38880000 0xc0000>;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -1169,7 +2363,7 @@
 			reg = <0x32f10100 0x8>,
 			      <0x381f0000 0x20>;
 			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
-				 <&clk IMX8MP_CLK_USB_ROOT>;
+				 <&clk IMX8MP_CLK_USB_SUSP>;
 			clock-names = "hsio", "suspend";
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
@@ -1182,14 +2376,15 @@
 			usb_dwc3_0: usb@38100000 {
 				compatible = "snps,dwc3";
 				reg = <0x38100000 0x10000>;
-				clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
 					 <&clk IMX8MP_CLK_USB_CORE_REF>,
-					 <&clk IMX8MP_CLK_USB_ROOT>;
+					 <&clk IMX8MP_CLK_USB_SUSP>;
 				clock-names = "bus_early", "ref", "suspend";
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb3_phy0>, <&usb3_phy0>;
 				phy-names = "usb2-phy", "usb3-phy";
-				snps,dis-u2-freeclk-exists-quirk;
+				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,parkmode-disable-ss-quirk;
 			};
 
 		};
@@ -1211,7 +2406,7 @@
 			reg = <0x32f10108 0x8>,
 			      <0x382f0000 0x20>;
 			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
-				 <&clk IMX8MP_CLK_USB_ROOT>;
+				 <&clk IMX8MP_CLK_USB_SUSP>;
 			clock-names = "hsio", "suspend";
 			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
@@ -1224,25 +2419,32 @@
 			usb_dwc3_1: usb@38200000 {
 				compatible = "snps,dwc3";
 				reg = <0x38200000 0x10000>;
-				clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
 					 <&clk IMX8MP_CLK_USB_CORE_REF>,
-					 <&clk IMX8MP_CLK_USB_ROOT>;
+					 <&clk IMX8MP_CLK_USB_SUSP>;
 				clock-names = "bus_early", "ref", "suspend";
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb3_phy1>, <&usb3_phy1>;
 				phy-names = "usb2-phy", "usb3-phy";
-				snps,dis-u2-freeclk-exists-quirk;
+				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,parkmode-disable-ss-quirk;
 			};
 		};
 
 		dsp: dsp@3b6e8000 {
-			compatible = "fsl,imx8mp-dsp";
+			compatible = "fsl,imx8mp-hifi4";
 			reg = <0x3b6e8000 0x88000>;
-			mbox-names = "txdb0", "txdb1",
-				"rxdb0", "rxdb1";
-			mboxes = <&mu2 2 0>, <&mu2 2 1>,
-				<&mu2 3 0>, <&mu2 3 1>;
-			memory-region = <&dsp_reserved>;
+			clocks = <&audio_blk_ctrl  IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
+				<&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_OCRAMA_IPG>,
+				<&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
+				<&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSPDBG_ROOT>;
+			clock-names = "ipg", "ocram", "core", "debug";
+			power-domains = <&pgc_audio>;
+			mbox-names = "tx", "rx", "rxdb";
+			mboxes = <&mu2 0 0>, <&mu2 1 0>, <&mu2 3 0>;
+			firmware-name = "imx/dsp/hifi4.bin";
+			resets = <&audio_blk_ctrl IMX8MP_AUDIOMIX_DSP_RUNSTALL>;
+			reset-names = "runstall";
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 82387b9cb800..a88bc9034663 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -46,6 +46,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
 		enable-active-high;
 	};
 
@@ -107,6 +108,7 @@
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&cpudai>;
 		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,mclk-fs = <256>;
 		simple-audio-card,widgets =
 			"Line", "Left Line Out Jack",
 			"Line", "Right Line Out Jack";
@@ -116,27 +118,41 @@
 
 		cpudai: simple-audio-card,cpu {
 			sound-dai = <&sai2>;
+			system-clock-direction-out;
 		};
 
 		link_codec: simple-audio-card,codec {
 			sound-dai = <&wm8524>;
-			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
 		};
 	};
 
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_in: spdif-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "imx-spdif";
-		spdif-controller = <&spdif1>;
-		spdif-out;
-		spdif-in;
+		audio-cpu = <&spdif1>;
+		audio-codec = <&spdif_out>, <&spdif_in>;
+	};
+
+	hdmi_arc_in: hdmi-arc-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
 	};
 
 	sound-hdmi-arc {
 		compatible = "fsl,imx-audio-spdif";
 		model = "imx-hdmi-arc";
-		spdif-controller = <&spdif2>;
-		spdif-in;
+		audio-cpu = <&spdif2>;
+		audio-codec = <&hdmi_arc_in>;
 	};
 };
 
@@ -163,22 +179,22 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
 		/*
 		 * On imx8mq B0 PLL can't be bypassed so low bus is 166M
 		 */
-		opp-166M {
+		opp-166000000 {
 			opp-hz = /bits/ 64 <166935483>;
 		};
 
-		opp-800M {
+		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 		};
 	};
@@ -355,28 +371,46 @@
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio5 28 GPIO_ACTIVE_LOW>;
 	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
-		 <&clk IMX8MQ_CLK_PCIE1_AUX>,
+		 <&pcie0_refclk>,
 		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
-		 <&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
 	vph-supply = <&vgen5_reg>;
 	status = "okay";
 };
 
+&pcie0_ep {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+		 <&pcie0_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
+	status = "disabled";
+};
+
 &pcie1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie1>;
 	reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
 	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
-		 <&clk IMX8MQ_CLK_PCIE2_AUX>,
+		 <&pcie0_refclk>,
 		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
-		 <&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
 	vpcie-supply = <&reg_pcie1>;
 	vph-supply = <&vgen5_reg>;
 	status = "okay";
 };
 
+&pcie1_ep {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie1>;
+	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+		 <&pcie0_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+	status = "disabled";
+};
+
 &pgc_gpu {
 	power-supply = <&sw1a_reg>;
 };
@@ -407,6 +441,11 @@
 	assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>;
 	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>;
 	assigned-clock-rates = <0>, <24576000>;
+	clocks = <&clk IMX8MQ_CLK_SAI2_IPG>, <&clk IMX8MQ_CLK_DUMMY>,
+		<&clk IMX8MQ_CLK_SAI2_ROOT>, <&clk IMX8MQ_CLK_DUMMY>,
+		<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_AUDIO_PLL1_OUT>,
+		<&clk IMX8MQ_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
index 366693f31992..e92b5d5a66b5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
@@ -42,7 +42,7 @@
 	status = "okay";
 
 	typec_ptn5100: usb-typec@50 {
-		compatible = "nxp,ptn5110";
+		compatible = "nxp,ptn5110", "tcpci";
 		reg = <0x50>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
index a91c136797f6..d8cf1f27c3ec 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
@@ -65,7 +65,7 @@
 	status = "okay";
 
 	tpm@0 {
-		compatible = "infineon,slb9670";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <43000000>;
 	};
@@ -245,20 +245,18 @@
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
 	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
-		 <&clk IMX8MQ_CLK_PCIE1_AUX>,
+		 <&pcie0_refclk>,
 		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
-		 <&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
 	status = "okay";
 };
 
 /* Intel Ethernet Controller I210/I211 */
 &pcie1 {
 	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
-		 <&clk IMX8MQ_CLK_PCIE2_AUX>,
+		 <&pcie1_refclk>,
 		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
-		 <&pcie1_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
 	fsl,max-link-speed = <1>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 6445c6b90b5b..d9f203c79519 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -7,6 +7,7 @@
 
 #include "dt-bindings/input/input.h"
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 #include "dt-bindings/pwm/pwm.h"
 #include "dt-bindings/usb/pd.h"
 #include "imx8mq.dtsi"
@@ -61,14 +62,13 @@
 	};
 
 	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
+		compatible = "pwm-leds";
 
-		led1 {
-			label = "LED 1";
-			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			max-brightness = <248>;
+			pwms = <&pwm2 0 50000 0>;
 		};
 	};
 
@@ -139,18 +139,6 @@
 		regulator-always-on;
 	};
 
-	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usdhc2_pwr>;
-		regulator-name = "VSD_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
 	wwan_codec: sound-wwan-codec {
 		compatible = "option,gtm601";
 		#sound-dai-cells = <0>;
@@ -184,7 +172,7 @@
 			"Headphones", "HP_OUT",
 			"Builtin Speaker", "Speaker Amp OUTR",
 			"Speaker Amp INR", "LINE_OUT";
-		simple-audio-card,hp-det-gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,hp-det-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 
 		simple-audio-card,cpu {
 			sound-dai = <&sai2>;
@@ -242,6 +230,13 @@
 		enable-active-high;
 		regulator-always-on;
 	};
+
+	wifi_pwr_seq: pwrseq {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_rst>;
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &A53_0 {
@@ -324,6 +319,7 @@
 				regulator-ramp-delay = <1250>;
 				rohm,dvs-run-voltage = <1000000>;
 				rohm,dvs-idle-voltage = <900000>;
+				regulator-always-on;
 			};
 
 			buck3_reg: BUCK3 {
@@ -433,7 +429,7 @@
 	};
 
 	typec_ptn5100: usb-typec@52 {
-		compatible = "nxp,ptn5110";
+		compatible = "nxp,ptn5110", "tcpci";
 		reg = <0x52>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec>;
@@ -561,9 +557,9 @@
 		reg = <0x6a>;
 		vdd-supply = <&reg_3v3_p>;
 		vddio-supply = <&reg_3v3_p>;
-		mount-matrix =  "1",  "0",  "0",
-				"0",  "1",  "0",
-				"0",  "0", "-1";
+		mount-matrix = "1",  "0",  "0",
+			       "0",  "1",  "0",
+			       "0",  "0", "-1";
 	};
 };
 
@@ -615,9 +611,9 @@
 		>;
 	};
 
-	pinctrl_gpio_leds: gpioledgrp {
+	pinctrl_pwm_led: pwmledgrp {
 		fsl,pins = <
-			MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x16
+			MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT	0x16
 		>;
 	};
 
@@ -667,7 +663,7 @@
 		>;
 	};
 
-	pinctrl_spkamp: spkamp {
+	pinctrl_spkamp: spkampgrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_SPDIF_TX_GPIO5_IO3		0x81  /* MUTE */
 		>;
@@ -807,7 +803,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_pwr: usdhc2pwrgrp {
+	pinctrl_usdhc2_rst: usdhc2rstgrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
 		>;
@@ -920,6 +916,12 @@
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_led>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -977,24 +979,27 @@
 };
 
 &usb_dwc3_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	dr_mode = "otg";
 	status = "okay";
 
-	port@0 {
-		reg = <0>;
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
 
-		typec_hs: endpoint {
-			remote-endpoint = <&usb_con_hs>;
+			typec_hs: endpoint {
+				remote-endpoint = <&usb_con_hs>;
+			};
 		};
-	};
 
-	port@1 {
-		reg = <1>;
+		port@1 {
+			reg = <1>;
 
-		typec_ss: endpoint {
-			remote-endpoint = <&usb_con_ss>;
+			typec_ss: endpoint {
+				remote-endpoint = <&usb_con_ss>;
+			};
 		};
 	};
 };
@@ -1024,8 +1029,8 @@
 	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
 	bus-width = <4>;
-	vmmc-supply = <&reg_usdhc2_vmmc>;
-	power-supply = <&wifi_pwr_en>;
+	vmmc-supply = <&wifi_pwr_en>;
+	mmc-pwrseq = <&wifi_pwr_seq>;
 	broken-cd;
 	disable-wp;
 	cap-sdio-irq;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
index 73bd431cbd6a..cf40025111c8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
@@ -12,18 +12,16 @@
 	compatible = "purism,librem5r2", "purism,librem5", "fsl,imx8mq";
 };
 
-&bq25895 {
-	ti,battery-regulation-voltage = <4192000>; /* uV */
-	ti,charge-current = <1600000>; /* uA */
-	ti,termination-current = <66000>;  /* uA */
+&accel_gyro {
+	mount-matrix = "1",  "0",  "0",
+		       "0", "-1",  "0",
+		       "0",  "0",  "1";
 };
 
-&accel_gyro {
-	mount-matrix =  "1",  "0",  "0",
-			"0", "-1",  "0",
-			"0",  "0",  "1";
+&bq25895 {
+	ti,charge-current = <1600000>; /* uA */
 };
 
 &proximity {
-	proximity-near-level = <120>;
+	proximity-near-level = <50>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
index 4533a84fb0b9..077c5cd2586f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
@@ -7,7 +7,7 @@
 
 &a53_opp_table {
 	opp-1000000000 {
-		opp-microvolt = <1000000>;
+		opp-microvolt = <950000>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
index e4f8b47cce4f..17f86496f8b0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
@@ -16,15 +16,13 @@
 };
 
 &accel_gyro {
-	mount-matrix =  "1",  "0",  "0",
-			"0",  "1",  "0",
-			"0",  "0", "-1";
+	mount-matrix = "1",  "0",  "0",
+		       "0",  "1",  "0",
+		       "0",  "0", "-1";
 };
 
 &bq25895 {
-	ti,battery-regulation-voltage = <4200000>; /* uV */
 	ti,charge-current = <1500000>; /* uA */
-	ti,termination-current = <144000>;  /* uA */
 };
 
 &camera_front {
@@ -40,6 +38,12 @@
 	};
 };
 
+&magnetometer {
+	mount-matrix = "1",  "0",  "0",
+		       "0", "-1",  "0",
+		       "0",  "0", "-1";
+};
+
 &proximity {
-	proximity-near-level = <25>;
+	proximity-near-level = <10>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
index 1056b7981bdb..33f398b48119 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
@@ -23,5 +23,5 @@
 };
 
 &proximity {
-	proximity-near-level = <10>;
+	proximity-near-level = <7>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 9eec8a7eecfc..9e0e2d7271ef 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -7,6 +7,7 @@
 
 #include "dt-bindings/input/input.h"
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 #include "dt-bindings/pwm/pwm.h"
 #include "dt-bindings/usb/pd.h"
 #include "imx8mq.dtsi"
@@ -19,6 +20,8 @@
 	backlight_dsi: backlight-dsi {
 		compatible = "led-backlight";
 		leds = <&led_backlight>;
+		brightness-levels = <255>;
+		default-brightness-level = <190>;
 	};
 
 	pmic_osc: clock-pmic {
@@ -42,7 +45,6 @@
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 			debounce-interval = <50>;
-			wakeup-source;
 		};
 
 		key-vol-up {
@@ -50,7 +52,31 @@
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			debounce-interval = <50>;
-			wakeup-source;
+		};
+	};
+
+	led-controller {
+		compatible = "pwm-leds-multicolor";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+			max-brightness = <248>;
+
+			led-0 {
+				color = <LED_COLOR_ID_BLUE>;
+				pwms = <&pwm2 0 50000 0>;
+			};
+
+			led-1 {
+				color = <LED_COLOR_ID_GREEN>;
+				pwms = <&pwm4 0 50000 0>;
+			};
+
+			led-2 {
+				color = <LED_COLOR_ID_RED>;
+				pwms = <&pwm3 0 50000 0>;
+			};
 		};
 	};
 
@@ -58,11 +84,20 @@
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_audiopwr>;
-		regulator-name = "AUDIO_PWR_EN";
+		regulator-name = "AUD_1V8";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_mic_2v4: regulator-mic-2v4 {
+		compatible = "regulator-fixed";
+		regulator-name = "MIC_2V4";
+		regulator-min-microvolt = <2400000>;
+		regulator-max-microvolt = <2400000>;
+		vin-supply = <&reg_aud_1v8>;
 	};
 
 	/*
@@ -206,7 +241,7 @@
 			"Headset Mic", "MICBIAS",
 			"IN3R", "Headset Mic",
 			"DMICDAT", "Digital Mic";
-		simple-audio-card,hp-det-gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,hp-det-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
 
 		simple-audio-card,cpu {
 			sound-dai = <&sai2>;
@@ -285,15 +320,19 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-800M {
+		opp-166000000 {
+			opp-hz = /bits/ 64 <166935483>;
+		};
+
+		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 		};
 	};
@@ -340,11 +379,21 @@
 		gpio-hog;
 		gpios = <1 GPIO_ACTIVE_HIGH>;
 		input;
-		lane-mapping = "pmic-5v";
+		line-name = "pmic-5v";
 	};
 };
 
 &iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* CLKO2 for cameras on both CSI1 and CSI2 */
+			MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2      0x1f
+		>;
+	};
+
 	pinctrl_audiopwr: audiopwrgrp {
 		fsl,pins = <
 			/* AUDIO_POWER_EN_3V3 */
@@ -636,7 +685,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
 			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
@@ -653,7 +702,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
 			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
@@ -683,7 +732,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x80
 			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x8d
@@ -696,7 +745,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x80
 			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x9f
@@ -732,7 +781,7 @@
 };
 
 &i2c1 {
-	clock-frequency = <387000>;
+	clock-frequency = <384000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -745,8 +794,13 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-names = "irq";
+		wakeup-source;
 
 		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -776,6 +830,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>, <&pinctrl_camera_pwr>;
 		clocks = <&pmic_osc>;
+		#clock-cells = <0>;
 		clock-names = "osc";
 		clock-output-names = "pmic_clk";
 		interrupt-parent = <&gpio1>;
@@ -789,9 +844,9 @@
 				regulator-max-microvolt = <1300000>;
 				regulator-boot-on;
 				regulator-ramp-delay = <1250>;
-				rohm,dvs-run-voltage = <900000>;
-				rohm,dvs-idle-voltage = <850000>;
-				rohm,dvs-suspend-voltage = <800000>;
+				rohm,dvs-run-voltage = <880000>;
+				rohm,dvs-idle-voltage = <820000>;
+				rohm,dvs-suspend-voltage = <810000>;
 				regulator-always-on;
 			};
 
@@ -801,8 +856,8 @@
 				regulator-max-microvolt = <1300000>;
 				regulator-boot-on;
 				regulator-ramp-delay = <1250>;
-				rohm,dvs-run-voltage = <1000000>;
-				rohm,dvs-idle-voltage = <900000>;
+				rohm,dvs-run-voltage = <950000>;
+				rohm,dvs-idle-voltage = <850000>;
 				regulator-always-on;
 			};
 
@@ -811,14 +866,14 @@
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1300000>;
 				regulator-boot-on;
-				rohm,dvs-run-voltage = <900000>;
+				rohm,dvs-run-voltage = <850000>;
 			};
 
 			buck4_reg: BUCK4 {
 				regulator-name = "buck4";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1300000>;
-				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-run-voltage = <930000>;
 			};
 
 			buck5_reg: BUCK5 {
@@ -926,12 +981,12 @@
 };
 
 &i2c2 {
-	clock-frequency = <387000>;
+	clock-frequency = <384000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	magnetometer@1e	{
+	magnetometer: magnetometer@1e	{
 		compatible = "st,lsm9ds1-magn";
 		reg = <0x1e>;
 		pinctrl-names = "default";
@@ -943,7 +998,7 @@
 	};
 
 	regulator@3e {
-		compatible = "tps65132";
+		compatible = "ti,tps65132";
 		reg = <0x3e>;
 
 		reg_lcd_avdd: outp {
@@ -975,7 +1030,7 @@
 };
 
 &i2c3 {
-	clock-frequency = <387000>;
+	clock-frequency = <384000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
@@ -993,7 +1048,7 @@
 		DBVDD-supply = <&reg_aud_1v8>;
 		AVDD-supply = <&reg_aud_1v8>;
 		CPVDD-supply = <&reg_aud_1v8>;
-		MICVDD-supply = <&reg_aud_1v8>;
+		MICVDD-supply = <&reg_mic_2v4>;
 		PLLVDD-supply = <&reg_aud_1v8>;
 		SPKVDD1-supply = <&reg_vsys_3v4>;
 		SPKVDD2-supply = <&reg_vsys_3v4>;
@@ -1065,11 +1120,17 @@
 };
 
 &i2c4 {
-	clock-frequency = <387000>;
+	clock-frequency = <384000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
 
+	vcm@c {
+		compatible = "dongwoon,dw9714";
+		reg = <0x0c>;
+		vcc-supply = <&reg_csi_1v8>;
+	};
+
 	bat: fuel-gauge@36 {
 		compatible = "maxim,max17055";
 		reg = <0x36>;
@@ -1077,6 +1138,7 @@
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gauge>;
+		power-supplies = <&bq25895>;
 		maxim,over-heat-temp = <700>;
 		maxim,over-volt = <4500>;
 		maxim,rsns-microohm = <5000>;
@@ -1089,13 +1151,12 @@
 		pinctrl-0 = <&pinctrl_charger_in>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		phys = <&usb3_phy0>;
-		ti,precharge-current = <130000>; /* uA */
+		ti,battery-regulation-voltage = <4208000>; /* uV */
+		ti,termination-current = <128000>;  /* uA */
+		ti,precharge-current = <128000>; /* uA */
 		ti,minimum-sys-voltage = <3700000>; /* uV */
 		ti,boost-voltage = <5000000>; /* uV */
 		ti,boost-max-current = <1500000>; /* uA */
-		ti,use-vinmin-threshold = <1>; /* enable VINDPM */
-		ti,vinmin-threshold = <3900000>; /* uV */
 		monitored-battery = <&bat>;
 		power-supplies = <&typec_pd>;
 	};
@@ -1106,8 +1167,7 @@
 };
 
 &mipi_csi1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
+	assigned-clock-rates = <266000000>, <200000000>, <66000000>;
 	status = "okay";
 
 	ports {
@@ -1261,25 +1321,28 @@
 };
 
 &usb_dwc3_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	dr_mode = "otg";
-	snps,dis_u3_susphy_quirk;
+	usb-role-switch;
 	status = "okay";
 
-	port@0 {
-		reg = <0>;
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		typec_hs: endpoint {
-			remote-endpoint = <&usb_con_hs>;
+		port@0 {
+			reg = <0>;
+
+			typec_hs: endpoint {
+				remote-endpoint = <&usb_con_hs>;
+			};
 		};
-	};
 
-	port@1 {
-		reg = <1>;
+		port@1 {
+			reg = <1>;
 
-		typec_ss: endpoint {
-			remote-endpoint = <&usb_con_ss>;
+			typec_ss: endpoint {
+				remote-endpoint = <&usb_con_ss>;
+			};
 		};
 	};
 };
@@ -1313,7 +1376,7 @@
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	bus-width = <8>;
 	vmmc-supply = <&reg_vdd_3v3>;
-	power-supply = <&reg_vdd_1v8>;
+	vqmmc-supply = <&reg_vdd_1v8>;
 	non-removable;
 	status = "okay";
 };
@@ -1328,9 +1391,9 @@
 	bus-width = <4>;
 	vmmc-supply = <&reg_wifi_3v3>;
 	mmc-pwrseq = <&usdhc2_pwrseq>;
-	post-power-on-delay-ms = <1000>;
+	post-power-on-delay-ms = <20>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-	max-frequency = <50000000>;
+	max-frequency = <100000000>;
 	disable-wp;
 	cap-sdio-irq;
 	keep-power-in-suspend;
@@ -1344,3 +1407,13 @@
 	fsl,ext-reset-output;
 	status = "okay";
 };
+
+&a53_opp_table {
+	opp-1000000000 {
+		opp-microvolt = <850000>;
+	};
+
+	opp-1500000000 {
+		opp-microvolt = <950000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
index 8956a46788fa..3ae3824be027 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
@@ -26,7 +26,7 @@
 	};
 
 	panel {
-		compatible = "innolux,n125hce-gn1", "simple-panel";
+		compatible = "innolux,n125hce-gn1";
 		power-supply = <&reg_main_3v3>;
 		backlight = <&backlight>;
 		no-hpd;
@@ -197,10 +197,9 @@
 	pinctrl-0 = <&pinctrl_pcie1>;
 	reset-gpio = <&gpio3 23 GPIO_ACTIVE_LOW>;
 	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
-		 <&clk IMX8MQ_CLK_PCIE2_AUX>,
+		 <&pcie1_refclk>,
 		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
-		 <&pcie1_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
 	status = "okay";
 };
 
@@ -210,7 +209,6 @@
 	status = "okay";
 };
 
-
 &reg_1p8v {
 	vin-supply = <&reg_main_5v>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
index 9dda2a1554c3..767819cce886 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -133,7 +133,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	i2cmux@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1_pca9546>;
@@ -142,7 +142,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		i2c1a: i2c1@0 {
+		i2c1a: i2c@0 {
 			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -159,7 +159,7 @@
 			};
 		};
 
-		i2c1b: i2c1@1 {
+		i2c1b: i2c@1 {
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -176,7 +176,7 @@
 			};
 		};
 
-		i2c1c: i2c1@2 {
+		i2c1c: i2c@2 {
 			reg = <2>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -193,7 +193,7 @@
 			};
 		};
 
-		i2c1d: i2c1@3 {
+		i2c1d: i2c@3 {
 			reg = <3>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -216,13 +216,13 @@
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
 
-	pca9546: i2cmux@70 {
+	pca9546: i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		i2c4@0 {
+		i2c@0 {
 			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -257,14 +257,14 @@
 			};
 		};
 
-		ddc_i2c_bus: i2c4@1 {
+		ddc_i2c_bus: i2c@1 {
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clock-frequency = <100000>;
 		};
 
-		i2c4@3 {
+		i2c@3 {
 			reg = <3>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
index a3b9d615a3b4..e34045d10a12 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -39,7 +39,7 @@
 
 	fan: gpio-fan {
 		compatible = "gpio-fan";
-		gpio-fan,speed-map = <0 0 8600 1>;
+		gpio-fan,speed-map = <0 0>, <8600 1>;
 		gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
 		#cooling-cells = <2>;
 		pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts
index 89cbec5c41b2..ec89b5adeb93 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts
@@ -67,12 +67,12 @@
 		compatible = "rohm,bd71837";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
+		#clock-cells = <0>;
 		clocks = <&pmic_osc>;
 		clock-names = "osc";
 		clock-output-names = "pmic_clk";
 		interrupt-parent = <&gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "irq";
 
 		regulators {
 			buck1: BUCK1 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
index 0187890a90c5..efc00f4abeb1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
@@ -133,7 +133,7 @@
 	};
 };
 
-&pgc_gpu{
+&pgc_gpu {
 	power-supply = <&sw1a_reg>;
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
index 5d5aa6537225..eaa9d0c0fcc1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
@@ -107,7 +107,7 @@
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_wifi_reg_on>;
-		gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -339,7 +339,7 @@
 	bus-width = <4>;
 	non-removable;
 	no-sd;
-	no-emmc;
+	no-mmc;
 	status = "okay";
 
 	brcmf: wifi@1 {
@@ -359,7 +359,7 @@
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 	disable-wp;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtso b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtso
new file mode 100644
index 000000000000..306977d6ba0c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtso
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2019-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq";
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&dphy {
+	status = "okay";
+};
+
+&dsi_lvds_bridge {
+	status = "okay";
+};
+
+&expander0 {
+	dsi-mux-oe-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "DSI_MUX_OE#";
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+       status = "okay";
+};
+
+&panel {
+	compatible = "tianma,tm070jvhg33";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
index d7660eab68b9..0165f3a25985 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
@@ -11,6 +11,7 @@
 / {
 	model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ on MBa8Mx";
 	compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq";
+	chassis-type = "embedded";
 
 	aliases {
 		eeprom0 = &eeprom3;
@@ -24,19 +25,7 @@
 		compatible = "linux,extcon-usb-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usbcon0>;
-		id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-	};
-
-	pcie0_refclk: pcie0-refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-
-	pcie1_refclk: pcie1-refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 	};
 
 	reg_otg_vbus: regulator-otg-vbus {
@@ -102,30 +91,25 @@
 	gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
 };
 
+/* PCIe slot on X36 */
 &pcie0 {
 	reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
 	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
-		 <&clk IMX8MQ_CLK_PCIE1_AUX>,
-		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
-		 <&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
-	epdev_on-supply = <&reg_vcc_3v3>;
-	hard-wired = <1>;
+		 <&pcieclk 3>,
+		 <&pcieclk 2>,
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
 	status = "okay";
 };
 
 /*
- * miniPCIe, also usable for cards with USB. Therefore configure the reset as
+ * miniPCIe on X28, also usable for cards with USB. Therefore configure the reset as
  * static gpio hog.
  */
 &pcie1 {
 	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
-		 <&clk IMX8MQ_CLK_PCIE2_AUX>,
-		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
-		 <&pcie1_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
-	epdev_on-supply = <&reg_vcc_3v3>;
-	hard-wired = <1>;
+		 <&pcieclk 1>,
+		 <&pcieclk 0>,
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
 	status = "okay";
 };
 
@@ -171,13 +155,12 @@
 	hnp-disable;
 	srp-disable;
 	adp-disable;
-	/* OC not supported due to non matching active polarity */
-	disable-over-current;
 	dr_mode = "otg";
 	status = "okay";
 };
 
 &usb3_phy1 {
+	vbus-supply = <&reg_hub_vbus>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
index 899e8e7dbc24..c92001c80f11 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
@@ -194,8 +194,8 @@
 		};
 	};
 
-	sensor0: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 
@@ -204,7 +204,6 @@
 		reg = <0x51>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rtc>;
-		interrupt-names = "irq";
 		interrupt-parent = <&gpio1>;
 		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 		quartz-load-femtofarads = <7000>;
@@ -221,12 +220,14 @@
 		reg = <0x53>;
 		pagesize = <16>;
 		read-only;
+		vcc-supply = <&reg_vcc3v3>;
 	};
 
 	eeprom0: eeprom@57 {
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
 	};
 };
 
@@ -250,11 +251,16 @@
 	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <84000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+		vcc-supply = <&nvcc_1v8_reg>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 4e05120c62d4..c7bbba45f368 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -15,7 +15,7 @@
 		stdout-path = &uart1;
 	};
 
-	mdio0: bitbang-mdio {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_mdio_bitbang>, <&pinctrl_fec1_phy_reset>;
@@ -177,7 +177,7 @@
 
 				port@2 {
 					reg = <2>;
-					label = "cpu";
+					phy-mode = "rev-rmii";
 					ethernet = <&fec1>;
 
 					fixed-link {
@@ -490,7 +490,7 @@
 	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu2";
 		current-speed = <1000000>;
 		#address-cells = <1>;
@@ -517,8 +517,6 @@
 		eeprom@a4 {
 			compatible = "zii,rave-sp-eeprom";
 			reg = <0xa4 0x4000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
 			zii,eeprom-name = "main-eeprom";
 		};
 	};
@@ -551,10 +549,9 @@
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
 	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
-	         <&clk IMX8MQ_CLK_PCIE1_AUX>,
+	         <&pcie0_refclk>,
 	         <&clk IMX8MQ_CLK_PCIE1_PHY>,
-	         <&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+	         <&clk IMX8MQ_CLK_PCIE1_AUX>;
 	vph-supply = <&vgen5_reg>;
 	status = "okay";
 };
@@ -564,10 +561,9 @@
 	pinctrl-0 = <&pinctrl_pcie1>;
 	reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
 	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
-	         <&clk IMX8MQ_CLK_PCIE2_AUX>,
+	         <&pcie1_refclk>,
 	         <&clk IMX8MQ_CLK_PCIE2_PHY>,
-	         <&pcie1_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+	         <&clk IMX8MQ_CLK_PCIE2_AUX>;
 	vph-supply = <&vgen5_reg>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index e9f0cdd10ab6..607962f807be 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -106,7 +106,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -126,7 +125,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -144,7 +142,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -162,7 +159,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -179,6 +175,7 @@
 		A53_L2: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -224,6 +221,59 @@
 		};
 	};
 
+	funnel {
+		/*
+		 * non-configurable funnel don't show up on the AMBA
+		 * bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-funnel";
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				ca_funnel_in_port0: endpoint {
+					remote-endpoint = <&etm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				ca_funnel_in_port1: endpoint {
+					remote-endpoint = <&etm1_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				ca_funnel_in_port2: endpoint {
+					remote-endpoint = <&etm2_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				ca_funnel_in_port3: endpoint {
+					remote-endpoint = <&etm3_out_port>;
+				};
+			};
+		};
+
+		out-ports {
+			port {
+				ca_funnel_out_port0: endpoint {
+					remote-endpoint = <&hugo_funnel_in_port0>;
+				};
+			};
+		};
+	};
+
 	pmu {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -329,6 +379,145 @@
 		nvmem-cells = <&imx8mq_uid>;
 		nvmem-cell-names = "soc_unique_id";
 
+		etm0: etm@28440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28440000 0x1000>;
+			cpu = <&A53_0>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm0_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm1: etm@28540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28540000 0x1000>;
+			cpu = <&A53_1>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm2: etm@28640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28640000 0x1000>;
+			cpu = <&A53_2>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm2_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm3: etm@28740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28740000 0x1000>;
+			cpu = <&A53_3>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm3_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port3>;
+					};
+				};
+			};
+		};
+
+		funnel@28c03000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x28c03000 0x1000>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					hugo_funnel_in_port0: endpoint {
+						remote-endpoint = <&ca_funnel_out_port0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					hugo_funnel_in_port1: endpoint {
+					/* M4 input */
+					};
+				};
+				/* the other input ports are not connect to anything */
+			};
+
+			out-ports {
+				port {
+					hugo_funnel_out_port0: endpoint {
+						remote-endpoint = <&etf_in_port>;
+					};
+				};
+			};
+		};
+
+		etf@28c04000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x28c04000 0x1000>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etf_in_port: endpoint {
+						remote-endpoint = <&hugo_funnel_out_port0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out_port: endpoint {
+						remote-endpoint = <&etr_in_port>;
+					};
+				};
+			};
+		};
+
+		etr@28c06000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x28c06000 0x1000>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etr_in_port: endpoint {
+						remote-endpoint = <&etf_out_port>;
+					};
+				};
+			};
+		};
+
 		aips1: bus@30000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x30000000 0x400000>;
@@ -534,7 +723,7 @@
 				status = "disabled";
 			};
 
-			sdma2: sdma@302c0000 {
+			sdma2: dma-controller@302c0000 {
 				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
 				reg = <0x302c0000 0x10000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
@@ -546,11 +735,13 @@
 			};
 
 			lcdif: lcd-controller@30320000 {
-				compatible = "fsl,imx8mq-lcdif", "fsl,imx28-lcdif";
+				compatible = "fsl,imx8mq-lcdif", "fsl,imx6sx-lcdif";
 				reg = <0x30320000 0x10000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
-				clock-names = "pix";
+				clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>,
+					 <&clk IMX8MQ_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MQ_CLK_DISP_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
 				assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
 						  <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
 						  <&clk IMX8MQ_CLK_LCDIF_PIXEL>,
@@ -574,8 +765,7 @@
 			};
 
 			iomuxc_gpr: syscon@30340000 {
-				compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr",
-					     "syscon", "simple-mfd";
+				compatible = "fsl,imx8mq-iomuxc-gpr", "syscon", "simple-mfd";
 				reg = <0x30340000 0x10000>;
 
 				mux: mux-controller {
@@ -592,32 +782,46 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				imx8mq_uid: soc-uid@410 {
+				/*
+				 * The register address below maps to the MX8M
+				 * Fusemap Description Table entries this way.
+				 * Assuming
+				 *   reg = <ADDR SIZE>;
+				 * then
+				 *   Fuse Address = (ADDR * 4) + 0x400
+				 * Note that if SIZE is greater than 4, then
+				 * each subsequent fuse is located at offset
+				 * +0x10 in Fusemap Description Table (e.g.
+				 * reg = <0x4 0x8> describes fuses 0x410 and
+				 * 0x420).
+				 */
+				imx8mq_uid: soc-uid@4 { /* 0x410-0x420 */
 					reg = <0x4 0x8>;
 				};
 
-				cpu_speed_grade: speed-grade@10 {
+				cpu_speed_grade: speed-grade@10 { /* 0x440 */
 					reg = <0x10 4>;
 				};
 
-				fec_mac_address: mac-address@90 {
+				fec_mac_address: mac-address@90 { /* 0x640 */
 					reg = <0x90 6>;
 				};
 			};
 
-			anatop: syscon@30360000 {
-				compatible = "fsl,imx8mq-anatop", "syscon";
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mq-anatop";
 				reg = <0x30360000 0x10000>;
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
 			};
 
 			snvs: snvs@30370000 {
 				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 				reg = <0x30370000 0x10000>;
 
-				snvs_rtc: snvs-rtc-lp{
+				snvs_rtc: snvs-rtc-lp {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					regmap =<&snvs>;
+					regmap = <&snvs>;
 					offset = <0x34>;
 					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 						<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
@@ -756,7 +960,7 @@
 									 <&clk IMX8MQ_SYS1_PLL_800M>,
 									 <&clk IMX8MQ_VPU_PLL>;
 						assigned-clock-rates = <600000000>,
-								       <600000000>,
+								       <300000000>,
 								       <800000000>,
 								       <0>;
 					};
@@ -926,6 +1130,8 @@
 				clocks = <&clk IMX8MQ_CLK_UART1_ROOT>,
 				         <&clk IMX8MQ_CLK_UART1_ROOT>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -937,6 +1143,8 @@
 				clocks = <&clk IMX8MQ_CLK_UART3_ROOT>,
 				         <&clk IMX8MQ_CLK_UART3_ROOT>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -948,6 +1156,8 @@
 				clocks = <&clk IMX8MQ_CLK_UART2_ROOT>,
 				         <&clk IMX8MQ_CLK_UART2_ROOT>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -1034,9 +1244,11 @@
 				};
 			};
 
-			mipi_dsi: mipi-dsi@30a00000 {
+			mipi_dsi: dsi@30a00000 {
 				compatible = "fsl,imx8mq-nwl-dsi";
 				reg = <0x30a00000 0x300>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&clk IMX8MQ_CLK_DSI_CORE>,
 					 <&clk IMX8MQ_CLK_DSI_AHB>,
 					 <&clk IMX8MQ_CLK_DSI_IPG_DIV>,
@@ -1074,6 +1286,13 @@
 							remote-endpoint = <&lcdif_mipi_dsi>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_dsi_out: endpoint {
+						};
+					};
 				};
 			};
 
@@ -1143,6 +1362,8 @@
 				clocks = <&clk IMX8MQ_CLK_UART4_ROOT>,
 				         <&clk IMX8MQ_CLK_UART4_ROOT>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -1184,7 +1405,7 @@
 			};
 
 			csi1: csi@30a90000 {
-				compatible = "fsl,imx8mq-csi", "fsl,imx7-csi";
+				compatible = "fsl,imx8mq-csi";
 				reg = <0x30a90000 0x10000>;
 				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>;
@@ -1236,7 +1457,7 @@
 			};
 
 			csi2: csi@30b80000 {
-				compatible = "fsl,imx8mq-csi", "fsl,imx7-csi";
+				compatible = "fsl,imx8mq-csi";
 				reg = <0x30b80000 0x10000>;
 				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>;
@@ -1302,7 +1523,7 @@
 				status = "disabled";
 			};
 
-			sdma1: sdma@30bd0000 {
+			sdma1: dma-controller@30bd0000 {
 				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -1356,15 +1577,15 @@
 			noc_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
-				opp-133M {
+				opp-133000000 {
 					opp-hz = /bits/ 64 <133333333>;
 				};
 
-				opp-400M {
+				opp-400000000 {
 					opp-hz = /bits/ 64 <400000000>;
 				};
 
-				opp-800M {
+				opp-800000000 {
 					opp-hz = /bits/ 64 <800000000>;
 				};
 			};
@@ -1431,7 +1652,7 @@
 			phys = <&usb3_phy0>, <&usb3_phy0>;
 			phy-names = "usb2-phy", "usb3-phy";
 			power-domains = <&pgc_otg1>;
-			usb3-resume-missing-cas;
+			snps,parkmode-disable-ss-quirk;
 			status = "disabled";
 		};
 
@@ -1463,7 +1684,7 @@
 			phys = <&usb3_phy1>, <&usb3_phy1>;
 			phy-names = "usb2-phy", "usb3-phy";
 			power-domains = <&pgc_otg2>;
-			usb3-resume-missing-cas;
+			snps,parkmode-disable-ss-quirk;
 			status = "disabled";
 		};
 
@@ -1528,6 +1749,11 @@
 			                <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,max-link-speed = <2>;
 			linux,pci-domain = <0>;
+			clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+				 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE1_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
 			power-domains = <&pgc_pcie>;
 			resets = <&src IMX8MQ_RESET_PCIEPHY>,
 			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
@@ -1544,6 +1770,41 @@
 			status = "disabled";
 		};
 
+		pcie0_ep: pcie-ep@33800000 {
+			compatible = "fsl,imx8mq-pcie-ep";
+			reg = <0x33800000 0x100000>,
+			      <0x18000000 0x8000000>,
+			      <0x33900000 0x100000>,
+			      <0x33b00000 0x100000>;
+			reg-names = "dbi", "addr_space", "dbi2", "atu";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			linux,pci-domain = <0>;
+			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIEPHY2>,
+				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
+				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
+					  <&clk IMX8MQ_CLK_PCIE2_PHY>,
+					  <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+						 <&clk IMX8MQ_SYS2_PLL_100M>,
+						 <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+					       <10000000>;
+			num-ib-windows = <4>;
+			num-ob-windows = <4>;
+			fsl,max-link-speed = <2>;
+			status = "disabled";
+		};
+
 		pcie1: pcie@33c00000 {
 			compatible = "fsl,imx8mq-pcie";
 			reg = <0x33c00000 0x400000>,
@@ -1552,8 +1813,9 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			ranges =  <0x81000000 0 0x00000000 0x27f80000 0 0x00010000>, /* downstream I/O 64KB */
-				  <0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000>, /* downstream I/O 64KB */
+				 <0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */
 			num-lanes = <1>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1565,6 +1827,11 @@
 					<0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,max-link-speed = <2>;
 			linux,pci-domain = <1>;
+			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
 			power-domains = <&pgc_pcie>;
 			resets = <&src IMX8MQ_RESET_PCIEPHY2>,
 			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
@@ -1581,6 +1848,41 @@
 			status = "disabled";
 		};
 
+		pcie1_ep: pcie-ep@33c00000 {
+			compatible = "fsl,imx8mq-pcie-ep";
+			reg = <0x33c00000 0x100000>,
+			      <0x20000000 0x8000000>,
+			      <0x33d00000 0x100000>,
+			      <0x33f00000 0x100000>;
+			reg-names = "dbi", "addr_space", "dbi2", "atu";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			fsl,max-link-speed = <2>;
+			linux,pci-domain = <1>;
+			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIEPHY2>,
+				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
+				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
+					  <&clk IMX8MQ_CLK_PCIE2_PHY>,
+					  <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+						 <&clk IMX8MQ_SYS2_PLL_100M>,
+						 <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+					       <10000000>;
+			num-ib-windows = <4>;
+			num-ob-windows = <4>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,	/* GIC Dist */
@@ -1588,6 +1890,7 @@
 			      <0x31000000 0x2000>,	/* GICC */
 			      <0x31010000 0x2000>,	/* GICV */
 			      <0x31020000 0x2000>;	/* GICH */
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dts
new file mode 100644
index 000000000000..8466a8204ed0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis.dtsi"
+#include "imx8-apalis-eval-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM/QP on Apalis Evaluation Board V1.2";
+	compatible = "toradex,apalis-imx8-eval-v1.2",
+		     "toradex,apalis-imx8",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts
new file mode 100644
index 000000000000..b0ebf6d05450
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis.dtsi"
+#include "imx8-apalis-eval-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM/QP on Apalis Evaluation Board";
+	compatible = "toradex,apalis-imx8-eval",
+		     "toradex,apalis-imx8",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts
new file mode 100644
index 000000000000..68ce58dc7102
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis.dtsi"
+#include "imx8-apalis-ixora-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM/QP on Apalis Ixora V1.1 Carrier Board";
+	compatible = "toradex,apalis-imx8-ixora-v1.1",
+		     "toradex,apalis-imx8",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts
new file mode 100644
index 000000000000..92c0ae0c0337
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis-v1.1.dtsi"
+#include "imx8-apalis-eval-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1 on Apalis Evaluation Board V1.2";
+	compatible = "toradex,apalis-imx8-v1.1-eval-v1.2",
+		     "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	/delete-property/ no-1-8-v;
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	/delete-property/ no-1-8-v;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts
new file mode 100644
index 000000000000..c998e542f93c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis-v1.1.dtsi"
+#include "imx8-apalis-eval-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1 on Apalis Evaluation Board";
+	compatible = "toradex,apalis-imx8-v1.1-eval",
+		     "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts
new file mode 100644
index 000000000000..ad7f644968fa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis-v1.1.dtsi"
+#include "imx8-apalis-ixora-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1 on Apalis Ixora V1.1 Carrier Board";
+	compatible = "toradex,apalis-imx8-v1.1-ixora-v1.1",
+		     "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts
new file mode 100644
index 000000000000..3b2e8c93b846
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis-v1.1.dtsi"
+#include "imx8-apalis-ixora-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1 on Apalis Ixora V1.2 Carrier Board";
+	compatible = "toradex,apalis-imx8-v1.1-ixora-v1.2",
+		     "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi
new file mode 100644
index 000000000000..b1c3f331c4ed
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8qm.dtsi"
+#include "imx8-apalis-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1";
+};
+
+/* TODO: Cooling Maps */
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
new file mode 100644
index 000000000000..f97feee52c81
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include "imx8qm-apalis-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM";
+};
+
+&ethphy0 {
+	interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+};
+
+/*
+ * Apalis iMX8QM V1.0 has PHY KSZ9031. the Micrel PHY driver
+ * doesn't support setting internal PHY delay for TXC line for
+ * this PHY model. Use delay on MAC side instead.
+ */
+&fec1 {
+	phy-mode = "rgmii-rxid";
+};
+
+&hsio_refa_clk {
+	enable-gpios = <&lsio_gpio4 27 GPIO_ACTIVE_HIGH>;
+};
+
+/* TODO: Apalis HDMI1 */
+
+/* Apalis I2C2 (DDC) */
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+};
+
+&lsio_gpio0 {
+	gpio-line-names = "MXM3_279",
+			  "MXM3_277",
+			  "MXM3_135",
+			  "MXM3_203",
+			  "MXM3_201",
+			  "MXM3_275",
+			  "MXM3_110",
+			  "MXM3_120",
+			  "MXM3_1/GPIO1",
+			  "MXM3_3/GPIO2",
+			  "MXM3_124",
+			  "MXM3_122",
+			  "MXM3_5/GPIO3",
+			  "MXM3_7/GPIO4",
+			  "",
+			  "",
+			  "MXM3_4",
+			  "MXM3_211",
+			  "MXM3_209",
+			  "MXM3_2",
+			  "MXM3_136",
+			  "MXM3_134",
+			  "MXM3_6",
+			  "MXM3_8",
+			  "MXM3_112",
+			  "MXM3_118",
+			  "MXM3_114",
+			  "MXM3_116";
+};
+
+&lsio_gpio1 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_286",
+			  "",
+			  "MXM3_87",
+			  "MXM3_99",
+			  "MXM3_138",
+			  "MXM3_140",
+			  "MXM3_239",
+			  "",
+			  "MXM3_281",
+			  "MXM3_283",
+			  "MXM3_126",
+			  "MXM3_132",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_173",
+			  "MXM3_175",
+			  "MXM3_123";
+};
+
+&lsio_gpio2 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_198",
+			  "MXM3_35",
+			  "MXM3_164",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_217",
+			  "MXM3_215",
+			  "",
+			  "",
+			  "MXM3_193",
+			  "MXM3_194",
+			  "MXM3_37",
+			  "",
+			  "MXM3_271",
+			  "MXM3_273",
+			  "MXM3_195",
+			  "MXM3_197",
+			  "MXM3_177",
+			  "MXM3_179",
+			  "MXM3_181",
+			  "MXM3_183",
+			  "MXM3_185",
+			  "MXM3_187";
+};
+
+&lsio_gpio3 {
+	gpio-line-names = "MXM3_191",
+			  "",
+			  "MXM3_221",
+			  "MXM3_225",
+			  "MXM3_223",
+			  "MXM3_227",
+			  "MXM3_200",
+			  "MXM3_235",
+			  "MXM3_231",
+			  "MXM3_229",
+			  "MXM3_233",
+			  "MXM3_204",
+			  "MXM3_196",
+			  "",
+			  "MXM3_202",
+			  "",
+			  "",
+			  "",
+			  "MXM3_305",
+			  "MXM3_307",
+			  "MXM3_309",
+			  "MXM3_311",
+			  "MXM3_315",
+			  "MXM3_317",
+			  "MXM3_319",
+			  "MXM3_321",
+			  "MXM3_15/GPIO7",
+			  "MXM3_63",
+			  "MXM3_17/GPIO8",
+			  "MXM3_12",
+			  "MXM3_14",
+			  "MXM3_16";
+};
+
+&lsio_gpio4 {
+	gpio-line-names = "MXM3_18",
+			  "MXM3_11/GPIO5",
+			  "MXM3_13/GPIO6",
+			  "MXM3_274",
+			  "MXM3_84",
+			  "MXM3_262",
+			  "MXM3_96",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_190",
+			  "",
+			  "",
+			  "",
+			  "MXM3_269",
+			  "MXM3_251",
+			  "MXM3_253",
+			  "MXM3_295",
+			  "MXM3_299",
+			  "MXM3_301",
+			  "MXM3_297",
+			  "MXM3_293",
+			  "MXM3_291",
+			  "MXM3_289",
+			  "MXM3_287";
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_150",
+			  "MXM3_160",
+			  "MXM3_162",
+			  "MXM3_144",
+			  "MXM3_146",
+			  "MXM3_148",
+			  "MXM3_152",
+			  "MXM3_156",
+			  "MXM3_158",
+			  "MXM3_159",
+			  "MXM3_184",
+			  "MXM3_180",
+			  "MXM3_186",
+			  "MXM3_188",
+			  "MXM3_176",
+			  "MXM3_178";
+};
+
+&lsio_gpio6 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_261",
+			  "MXM3_263",
+			  "MXM3_259",
+			  "MXM3_257",
+			  "MXM3_255",
+			  "MXM3_128",
+			  "MXM3_130",
+			  "MXM3_265",
+			  "MXM3_249",
+			  "MXM3_247",
+			  "MXM3_245",
+			  "MXM3_243";
+};
+
+&pinctrl_fec1 {
+	fsl,pins =
+		/* Use pads in 1.8V mode */
+		<IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD			0x000014a0>,
+		<IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020>,
+		<IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO				0x06000020>,
+		<IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL		0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC			0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0			0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1			0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2			0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL		0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3			0x06000020>,
+		<IMX8QM_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M	0x06000020>,
+		/* On-module ETH_RESET# */
+		<IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11				0x06000020>,
+		/* On-module ETH_INT# */
+		<IMX8QM_LVDS0_GPIO01_LSIO_GPIO1_IO05				0x04000060>;
+};
+
+&pinctrl_fec1_sleep {
+	fsl,pins =
+		<IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD			0x000014a0>,
+		<IMX8QM_ENET0_MDC_LSIO_GPIO4_IO14				0x04000040>,
+		<IMX8QM_ENET0_MDIO_LSIO_GPIO4_IO13				0x04000040>,
+		<IMX8QM_ENET0_RGMII_TX_CTL_LSIO_GPIO5_IO31			0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXC_LSIO_GPIO5_IO30				0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXD0_LSIO_GPIO6_IO00			0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXD1_LSIO_GPIO6_IO01			0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXD2_LSIO_GPIO6_IO02			0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXD3_LSIO_GPIO6_IO03			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXC_LSIO_GPIO6_IO04				0x04000040>,
+		<IMX8QM_ENET0_RGMII_RX_CTL_LSIO_GPIO6_IO05			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXD0_LSIO_GPIO6_IO06			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXD1_LSIO_GPIO6_IO07			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXD2_LSIO_GPIO6_IO08			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXD3_LSIO_GPIO6_IO09			0x04000040>,
+		<IMX8QM_ENET0_REFCLK_125M_25M_LSIO_GPIO4_IO15			0x04000040>,
+		<IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11				0x04000040>,
+		<IMX8QM_LVDS0_GPIO01_LSIO_GPIO1_IO05				0x04000040>;
+};
+
+&iomuxc {
+	/* Apalis I2C2 (DDC) */
+	pinctrl_lpi2c0: lpi2c0grp {
+		fsl,pins =
+			<IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL			0x04000022>,
+			<IMX8QM_HDMI_TX0_TS_SDA_DMA_I2C0_SDA			0x04000022>;
+	};
+};
+
+/* On-module PCIe_CTRL0_CLKREQ */
+&pinctrl_pcie_sata_refclk {
+	fsl,pins =
+		<IMX8QM_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO27			0x00000021>;
+};
+
+/* TODO: On-module Wi-Fi */
+
+/* Apalis MMC1 */
+&usdhc2 {
+	/*
+	 * The PMIC on V1.0A HW generates 1.6V instead of 1.8V which creates
+	 * issues with certain SD cards, disable 1.8V signaling for now.
+	 */
+	no-1-8-v;
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	/*
+	 * The PMIC on V1.0A HW generates 1.6V instead of 1.8V which creates
+	 * issues with certain SD cards, disable 1.8V signaling for now.
+	 */
+	no-1-8-v;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso
new file mode 100644
index 000000000000..ceb63c28b21a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&i2c_mipi_csi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c_mipi_csi0>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ov5640_mipi_0: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		clocks = <&xtal24m>;
+		clock-names = "xclk";
+		pinctrl-0 = <&pinctrl_mipi_csi0>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&lsio_gpio1 27 GPIO_ACTIVE_LOW>;
+		AVDD-supply = <&reg_2v8>;
+		DVDD-supply = <&reg_1v5>;
+		DOVDD-supply = <&reg_1v8>;
+
+		port {
+			ov5640_mipi_0_ep: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&mipi_csi0_in>;
+			};
+		};
+	};
+};
+
+&irqsteer_csi0 {
+	status = "okay";
+};
+
+&isi {
+	status = "okay";
+};
+
+&mipi_csi_0 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_csi0_in: endpoint {
+				data-lanes = <1 2>;
+				remote-endpoint = <&ov5640_mipi_0_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso
new file mode 100644
index 000000000000..9e6d33c0315e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&i2c_mipi_csi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c_mipi_csi1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ov5640_mipi_1: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		clocks = <&xtal24m>;
+		clock-names = "xclk";
+		pinctrl-0 = <&pinctrl_mipi_csi1>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lsio_gpio1 31 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&lsio_gpio1 30 GPIO_ACTIVE_LOW>;
+		AVDD-supply = <&reg_2v8>;
+		DVDD-supply = <&reg_1v5>;
+		DOVDD-supply = <&reg_1v8>;
+
+		port {
+			ov5640_mipi_1_ep: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&mipi_csi1_in>;
+			};
+		};
+	};
+};
+
+&irqsteer_csi1 {
+	status = "okay";
+};
+
+&isi {
+	status = "okay";
+};
+
+&mipi_csi_1 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_csi1_in: endpoint {
+				data-lanes = <1 2>;
+				remote-endpoint = <&ov5640_mipi_1_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index ce9d3f0b98fc..202d5c67ac40 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -6,6 +6,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/usb/pd.h>
 #include "imx8qm.dtsi"
 
 / {
@@ -22,19 +23,661 @@
 		/delete-node/ cpu@101;
 	};
 
+	thermal-zones {
+		/delete-node/ cpu1-thermal;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0 0x40000000>;
 	};
 
+	xtal24m: clock-xtal24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal_24MHz";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		vdev0vring0: memory@90000000 {
+			reg = <0 0x90000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: memory@90008000 {
+			reg = <0 0x90008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: memory@90010000 {
+			reg = <0 0x90010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: memory@90018000 {
+			reg = <0 0x90018000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table0: memory@900ff000 {
+			reg = <0 0x900ff000 0 0x1000>;
+			no-map;
+		};
+
+		vdev2vring0: memory@90100000 {
+			reg = <0 0x90100000 0 0x8000>;
+			no-map;
+		};
+
+		vdev2vring1: memory@90108000 {
+			reg = <0 0x90108000 0 0x8000>;
+			no-map;
+		};
+
+		vdev3vring0: memory@90110000 {
+			reg = <0 0x90110000 0 0x8000>;
+			no-map;
+		};
+
+		vdev3vring1: memory@90118000 {
+			reg = <0 0x90118000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table1: memory@901ff000 {
+			reg = <0 0x901ff000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: memory@90400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90400000 0 0x100000>;
+			no-map;
+		};
+
+		dsp_reserved: memory@92400000 {
+			reg = <0 0x92400000 0 0x1000000>;
+			no-map;
+		};
+
+		dsp_vdev0vring0: memory@942f0000 {
+			reg = <0 0x942f0000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0vring1: memory@942f8000 {
+			reg = <0 0x942f8000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0buffer: memory@94300000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x94300000 0 0x100000>;
+			no-map;
+		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0xc0000000 0 0x3c000000>;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	lvds_backlight0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&qm_pwm_lvds0 0 100000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <80>;
+	};
+
+	lvds_backlight1: backlight-lvds1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm_lvds1 0 100000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <80>;
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-gpio";
+		mux-gpios = <&lsio_gpio5 3 GPIO_ACTIVE_HIGH>; /* needs to be an unused GPIO */
+		i2c-parent = <&i2c1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wm8960: audio-codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				clock-names = "mclk";
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				wlf,shared-lrclk;
+				wlf,hp-cfg = <2 2 3>;
+				wlf,gpio-cfg = <1 3>;
+				AVDD-supply = <&reg_audio_3v3>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wm8962: wm8962@1a {
+				compatible = "wlf,wm8962";
+				reg = <0x1a>;
+				clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				AVDD-supply = <&reg_audio_1v8>;
+				CPVDD-supply = <&reg_audio_1v8>;
+				MICVDD-supply = <&reg_audio_3v3>;
+				PLLVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
+			};
+		};
+
+	};
+
+	mux-controller {
+		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec_mux>;
+		select-gpios = <&lsio_gpio4 6 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		orientation-switch;
+
+		port {
+			usb3_data_ss: endpoint {
+				remote-endpoint = <&typec_con_ss>;
+			};
+		};
+	};
+
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_2v8: regulator-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
 	reg_usdhc2_vmmc: usdhc2-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "SD1_SPWR";
 		regulator-min-microvolt = <3000000>;
 		regulator-max-microvolt = <3000000>;
-		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "cs42888_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_fec2_supply: regulator-fec2-nvcc {
+		compatible = "regulator-fixed";
+		regulator-name = "fec2_nvcc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&max7322 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can01_en: regulator-can01-gen {
+		compatible = "regulator-fixed";
+		regulator-name = "can01-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can2_en: regulator-can2-gen {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can01_stby: regulator-can01-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can01-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can01_en>;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can2_en>;
+	};
+
+	reg_pciea: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&pinctrl_pciea_reg>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "mpcie_3v3";
+		gpio = <&lsio_gpio1 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_audio_5v: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	bt_sco_codec: audio-codec-bt {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai0>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx-audio-cs42888";
+		model = "imx-cs42888";
+		audio-cpu = <&esai0>;
+		audio-codec = <&cs42888>;
+		audio-asrc = <&asrc0>;
+		audio-routing = "Line Out Jack", "AOUT1L",
+				"Line Out Jack", "AOUT1R",
+				"Line Out Jack", "AOUT2L",
+				"Line Out Jack", "AOUT2R",
+				"Line Out Jack", "AOUT3L",
+				"Line Out Jack", "AOUT3R",
+				"Line Out Jack", "AOUT4L",
+				"Line Out Jack", "AOUT4R",
+				"AIN1L", "Line In Jack",
+				"AIN1R", "Line In Jack",
+				"AIN2L", "Line In Jack",
+				"AIN2R", "Line In Jack";
+	};
+
+	sound-wm8960 {
+		compatible = "fsl,imx-audio-wm8960";
+		model = "wm8960-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&wm8960>;
+		hp-det-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+		audio-routing = "Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"Ext Spk", "SPK_LP",
+				"Ext Spk", "SPK_LN",
+				"Ext Spk", "SPK_RP",
+				"Ext Spk", "SPK_RN",
+				"LINPUT1", "Mic Jack",
+				"Mic Jack", "MICB";
+	};
+
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&wm8962>;
+		hp-det-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+		audio-routing = "Headphone Jack", "HPOUTL",
+				"Headphone Jack", "HPOUTR",
+				"Ext Spk", "SPKOUTL",
+				"Ext Spk", "SPKOUTR",
+				"AMIC", "MICBIAS",
+				"IN1R", "AMIC",
+				"IN3R", "AMIC";
+	};
+
+	imx8qm-cm4-0 {
+		compatible = "fsl,imx8qm-cm4";
+		clocks = <&clk_dummy>;
+		mbox-names = "tx", "rx", "rxdb";
+		mboxes = <&lsio_mu5 0 1
+			  &lsio_mu5 1 1
+			  &lsio_mu5 3 1>;
+		memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+				<&vdev1vring0>, <&vdev1vring1>, <&rsc_table0>;
+		power-domains = <&pd IMX_SC_R_M4_0_PID0>, <&pd IMX_SC_R_M4_0_MU_1A>;
+
+		fsl,resource-id = <IMX_SC_R_M4_0_PID0>;
+		fsl,entry-address = <0x34fe0000>;
+	};
+
+	imx8qm-cm4-1 {
+		compatible = "fsl,imx8qm-cm4";
+		clocks = <&clk_dummy>;
+		mbox-names = "tx", "rx", "rxdb";
+		mboxes = <&lsio_mu6 0 1
+			  &lsio_mu6 1 1
+			  &lsio_mu6 3 1>;
+		memory-region = <&vdevbuffer>, <&vdev2vring0>, <&vdev2vring1>,
+				<&vdev3vring0>, <&vdev3vring1>, <&rsc_table1>;
+		power-domains = <&pd IMX_SC_R_M4_1_PID0>, <&pd IMX_SC_R_M4_1_MU_1A>;
+
+		fsl,resource-id = <IMX_SC_R_M4_1_PID0>;
+		fsl,entry-address = <0x38fe0000>;
+	};
+
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0>;
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&amix {
+	status = "okay";
+};
+
+&asrc0 {
+	fsl,asrc-rate = <48000>;
+	status = "okay";
+};
+
+&cm41_i2c {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cm41_i2c>;
+	status = "okay";
+
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	cs42888: audio-codec@48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "mclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cs42888_reset>;
+		VA-supply = <&reg_audio>;
+		VD-supply = <&reg_audio>;
+		VLS-supply = <&reg_audio>;
+		VLC-supply = <&reg_audio>;
+		reset-gpios = <&lsio_gpio4 25 GPIO_ACTIVE_LOW>;
+		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+				  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
+	};
+};
+
+&cm41_intmux {
+	status = "okay";
+};
+
+&esai0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esai0>;
+	assigned-clocks = <&acm IMX_ADMA_ACM_ESAI0_MCLK_SEL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&esai0_lpcg IMX_LPCG_CLK_4>;
+	assigned-clock-parents = <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <0>, <786432000>, <49152000>, <12288000>, <49152000>;
+	status = "okay";
+};
+
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-pcieb-sata";
+	fsl,refclk-pad-mode = "input";
+	status = "okay";
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lsm303agr-accel";
+		reg = <0x19>;
+	};
+
+	gyrometer@20 {
+		compatible = "nxp,fxas21002c";
+		reg = <0x20>;
+	};
+
+	light-sensor@44 {
+		compatible = "isil,isl29023";
+		reg = <0x44>;
+		interrupt-parent = <&lsio_gpio4>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	pressure-sensor@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+
+	max7322: gpio@68 {
+		compatible = "maxim,max7322";
+		reg = <0x68>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gyrometer@69 {
+		compatible = "st,l3g4200d-gyro";
+		reg = <0x69>;
+	};
+
+	ptn5110: tcpc@51 {
+		compatible = "nxp,ptn5110", "tcpci";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		reg = <0x51>;
+		interrupt-parent = <&lsio_gpio4>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		usb_con1: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_dr_sw: endpoint {
+						remote-endpoint = <&usb3_drd_sw>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&lsio_gpio0 14 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&lsio_gpio0 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&i2c1_lvds0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0_lpi2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c1_lvds1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds1_lpi2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c0_mipi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mipi0_lpi2c0>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c0_mipi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mipi1_lpi2c0>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can01_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can01_stby>;
+	status = "okay";
+};
+
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan3>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
 };
 
 &lpuart0 {
@@ -43,6 +686,51 @@
 	status = "okay";
 };
 
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+	status = "okay";
+};
+
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+	status = "okay";
+};
+
+&lpspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi2 &pinctrl_lpspi2_cs>;
+	cs-gpios = <&lsio_gpio3 10 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&lsio_mu5 {
+	status = "okay";
+};
+
+&lsio_mu6 {
+	status = "okay";
+};
+
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
@@ -67,6 +755,50 @@
 	};
 };
 
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec2>;
+	phy-mode = "rgmii-txid";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_fec2_supply>;
+	nvmem-cells = <&fec_mac1>;
+	nvmem-cell-names = "mac-address";
+	rx-internal-delay-ps = <2000>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&pciea {
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pciea>;
+	pinctrl-names = "default";
+	reset-gpio = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pciea>;
+	status = "okay";
+};
+
+&pcieb {
+	phys = <&hsio_phy 1 PHY_TYPE_PCIE 1>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	reset-gpio = <&lsio_gpio5 0 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&qm_pwm_lvds0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_lvds0>;
+	status = "okay";
+};
+
+&pwm_lvds1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_lvds1>;
+	status = "okay";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -82,12 +814,168 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
-	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&lsio_gpio5 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb3_drd_sw: endpoint {
+			remote-endpoint = <&typec_dr_sw>;
+		};
+	};
+};
+
+&sai0 {
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai0_lpcg IMX_LPCG_CLK_4>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai0>;
+	status = "okay";
+};
+
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg IMX_LPCG_CLK_4>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&sai6 {
+	assigned-clocks = <&acm IMX_ADMA_ACM_SAI6_MCLK_SEL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai6_lpcg IMX_LPCG_CLK_4>;
+	assigned-clock-parents = <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <0>, <786432000>, <98304000>, <12288000>, <98304000>;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&sai7 {
+	assigned-clocks = <&acm IMX_ADMA_ACM_SAI7_MCLK_SEL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai7_lpcg IMX_LPCG_CLK_4>;
+	assigned-clock-parents = <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <0>, <786432000>, <98304000>, <12288000>, <98304000>;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&vpu_dsp {
+	memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
+			<&dsp_vdev0vring1>, <&dsp_reserved>;
 	status = "okay";
 };
 
 &iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			IMX8QM_MCLK_OUT0_AUD_ACM_MCLK_OUT0			0x0600004c
+			IMX8QM_SCU_GPIO0_03_LSIO_GPIO0_IO31			0x0600004c
+		>;
+	};
+
+	pinctrl_cs42888_reset: cs42888_resetgrp {
+		fsl,pins = <
+			IMX8QM_QSPI1A_DATA1_LSIO_GPIO4_IO25			0x0600004c
+		>;
+	};
+
+	pinctrl_i2c_mipi_csi0: i2c-mipi-csi0grp {
+		fsl,pins = <
+			IMX8QM_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_I2C0_SCL		0xc2000020
+			IMX8QM_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_I2C0_SDA		0xc2000020
+		>;
+	};
+
+	pinctrl_i2c_mipi_csi1: i2c-mipi-csi1grp {
+		fsl,pins = <
+			IMX8QM_MIPI_CSI1_I2C0_SCL_MIPI_CSI1_I2C0_SCL		0xc2000020
+			IMX8QM_MIPI_CSI1_I2C0_SDA_MIPI_CSI1_I2C0_SDA		0xc2000020
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL			0x06000021
+			IMX8QM_HDMI_TX0_TS_SDA_DMA_I2C0_SDA			0x06000021
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			IMX8QM_GPT0_CLK_DMA_I2C1_SCL 0x0600004c
+			IMX8QM_GPT0_CAPTURE_DMA_I2C1_SDA 0x0600004c
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpio-grp {
+		fsl,pins = <
+			IMX8QM_GPT0_CLK_LSIO_GPIO0_IO14		0xc600004c
+			IMX8QM_GPT0_CAPTURE_LSIO_GPIO0_IO15	0xc600004c
+		>;
+	};
+
+	pinctrl_adc0: adc0grp {
+		fsl,pins = <
+			IMX8QM_ADC_IN0_DMA_ADC0_IN0				0xc0000060
+		>;
+	};
+
+	pinctrl_cm41_i2c: cm41i2cgrp {
+		fsl,pins = <
+			IMX8QM_M41_I2C0_SDA_M41_I2C0_SDA			0x0600004c
+			IMX8QM_M41_I2C0_SCL_M41_I2C0_SCL			0x0600004c
+		>;
+	};
+
+	pinctrl_esai0: esai0grp {
+		fsl,pins = <
+			IMX8QM_ESAI0_FSR_AUD_ESAI0_FSR				0xc6000040
+			IMX8QM_ESAI0_FST_AUD_ESAI0_FST				0xc6000040
+			IMX8QM_ESAI0_SCKR_AUD_ESAI0_SCKR			0xc6000040
+			IMX8QM_ESAI0_SCKT_AUD_ESAI0_SCKT			0xc6000040
+			IMX8QM_ESAI0_TX0_AUD_ESAI0_TX0				0xc6000040
+			IMX8QM_ESAI0_TX1_AUD_ESAI0_TX1				0xc6000040
+			IMX8QM_ESAI0_TX2_RX3_AUD_ESAI0_TX2_RX3			0xc6000040
+			IMX8QM_ESAI0_TX3_RX2_AUD_ESAI0_TX3_RX2			0xc6000040
+			IMX8QM_ESAI0_TX4_RX1_AUD_ESAI0_TX4_RX1			0xc6000040
+			IMX8QM_ESAI0_TX5_RX0_AUD_ESAI0_TX5_RX0			0xc6000040
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020
@@ -107,6 +995,96 @@
 		>;
 	};
 
+	pinctrl_lpspi2: lpspi2grp {
+		fsl,pins = <
+			IMX8QM_SPI2_SCK_DMA_SPI2_SCK		0x06000040
+			IMX8QM_SPI2_SDO_DMA_SPI2_SDO		0x06000040
+			IMX8QM_SPI2_SDI_DMA_SPI2_SDI		0x06000040
+		>;
+	};
+
+	pinctrl_lpspi2_cs: lpspi2csgrp {
+		fsl,pins = <
+			IMX8QM_SPI2_CS0_LSIO_GPIO3_IO10		0x21
+		>;
+	};
+
+	pinctrl_mipi0_lpi2c0: mipi0_lpi2c0grp {
+		fsl,pins = <
+			IMX8QM_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL      0xc6000020
+			IMX8QM_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA      0xc6000020
+			IMX8QM_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO19         0x00000020
+		>;
+	};
+
+	pinctrl_mipi1_lpi2c0: mipi1_lpi2c0grp {
+		fsl,pins = <
+			IMX8QM_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL      0xc6000020
+			IMX8QM_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA      0xc6000020
+			IMX8QM_MIPI_DSI1_GPIO0_01_LSIO_GPIO1_IO23         0x00000020
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			IMX8QM_QSPI0A_DATA0_LSIO_QSPI0A_DATA0     0x06000021
+			IMX8QM_QSPI0A_DATA1_LSIO_QSPI0A_DATA1     0x06000021
+			IMX8QM_QSPI0A_DATA2_LSIO_QSPI0A_DATA2     0x06000021
+			IMX8QM_QSPI0A_DATA3_LSIO_QSPI0A_DATA3     0x06000021
+			IMX8QM_QSPI0A_DQS_LSIO_QSPI0A_DQS         0x06000021
+			IMX8QM_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B     0x06000021
+			IMX8QM_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B     0x06000021
+			IMX8QM_QSPI0A_SCLK_LSIO_QSPI0A_SCLK       0x06000021
+			IMX8QM_QSPI0B_SCLK_LSIO_QSPI0B_SCLK       0x06000021
+			IMX8QM_QSPI0B_DATA0_LSIO_QSPI0B_DATA0     0x06000021
+			IMX8QM_QSPI0B_DATA1_LSIO_QSPI0B_DATA1     0x06000021
+			IMX8QM_QSPI0B_DATA2_LSIO_QSPI0B_DATA2     0x06000021
+			IMX8QM_QSPI0B_DATA3_LSIO_QSPI0B_DATA3     0x06000021
+			IMX8QM_QSPI0B_DQS_LSIO_QSPI0B_DQS         0x06000021
+			IMX8QM_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B     0x06000021
+			IMX8QM_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B     0x06000021
+		>;
+	};
+
+	pinctrl_fec2: fec2grp {
+		fsl,pins = <
+			IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD		0x000014a0
+			IMX8QM_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL	0x00000060
+			IMX8QM_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC		0x00000060
+			IMX8QM_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0		0x00000060
+			IMX8QM_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1		0x00000060
+			IMX8QM_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2		0x00000060
+			IMX8QM_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3		0x00000060
+			IMX8QM_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC		0x00000060
+			IMX8QM_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL	0x00000060
+			IMX8QM_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0		0x00000060
+			IMX8QM_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1		0x00000060
+			IMX8QM_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2		0x00000060
+			IMX8QM_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3		0x00000060
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan0grp {
+		fsl,pins = <
+			IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX			0x21
+			IMX8QM_FLEXCAN0_RX_DMA_FLEXCAN0_RX			0x21
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan1grp {
+		fsl,pins = <
+			IMX8QM_FLEXCAN1_TX_DMA_FLEXCAN1_TX			0x21
+			IMX8QM_FLEXCAN1_RX_DMA_FLEXCAN1_RX			0x21
+		>;
+	};
+
+	pinctrl_flexcan3: flexcan3grp {
+		fsl,pins = <
+			IMX8QM_FLEXCAN2_TX_DMA_FLEXCAN2_TX			0x21
+			IMX8QM_FLEXCAN2_RX_DMA_FLEXCAN2_RX			0x21
+		>;
+	};
+
 	pinctrl_lpuart0: lpuart0grp {
 		fsl,pins = <
 			IMX8QM_UART0_RX_DMA_UART0_RX				0x06000020
@@ -114,6 +1092,115 @@
 		>;
 	};
 
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <
+			IMX8QM_UART0_RTS_B_DMA_UART2_RX				0x06000020
+			IMX8QM_UART0_CTS_B_DMA_UART2_TX				0x06000020
+		>;
+	};
+
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <
+			IMX8QM_M41_GPIO0_00_DMA_UART3_RX			0x06000020
+			IMX8QM_M41_GPIO0_01_DMA_UART3_TX			0x06000020
+		>;
+	};
+
+	pinctrl_lvds0_lpi2c1: lvds0lpi2c1grp {
+		fsl,pins = <
+			IMX8QM_LVDS0_I2C1_SCL_LVDS0_I2C1_SCL	0xc600004c
+			IMX8QM_LVDS0_I2C1_SDA_LVDS0_I2C1_SDA	0xc600004c
+		>;
+	};
+
+	pinctrl_lvds1_lpi2c1: lvds1lpi2c1grp {
+		fsl,pins = <
+			IMX8QM_LVDS1_I2C1_SCL_LVDS1_I2C1_SCL	0xc600004c
+			IMX8QM_LVDS1_I2C1_SDA_LVDS1_I2C1_SDA	0xc600004c
+		>;
+	};
+
+	pinctrl_mipi_csi0: mipi-csi0grp {
+		fsl,pins = <
+			IMX8QM_MIPI_CSI0_GPIO0_00_LSIO_GPIO1_IO27		0xC0000041
+			IMX8QM_MIPI_CSI0_GPIO0_01_LSIO_GPIO1_IO28		0xC0000041
+			IMX8QM_MIPI_CSI0_MCLK_OUT_MIPI_CSI0_ACM_MCLK_OUT	0xC0000041
+		>;
+	};
+
+	pinctrl_mipi_csi1: mipi-csi1grp {
+		fsl,pins = <
+			IMX8QM_MIPI_CSI1_GPIO0_00_LSIO_GPIO1_IO30		0xC0000041
+			IMX8QM_MIPI_CSI1_GPIO0_01_LSIO_GPIO1_IO31		0xC0000041
+			IMX8QM_MIPI_CSI1_MCLK_OUT_MIPI_CSI1_ACM_MCLK_OUT	0xC0000041
+		>;
+	};
+
+	pinctrl_pciea: pcieagrp {
+		fsl,pins = <
+			IMX8QM_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO28		0x04000021
+			IMX8QM_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO29		0x06000021
+			IMX8QM_SCU_GPIO0_07_SCU_DSC_RTC_CLOCK_OUTPUT_32K	0x20
+		>;
+	};
+
+	pinctrl_pciea_reg: pcieareggrp {
+		fsl,pins = <
+			IMX8QM_LVDS1_I2C0_SDA_LSIO_GPIO1_IO13			0x06000021
+		>;
+	};
+
+	pinctrl_pcieb: pciebgrp {
+		fsl,pins = <
+			IMX8QM_PCIE_CTRL1_CLKREQ_B_HSIO_PCIE1_CLKREQ_B		0x06000021
+			IMX8QM_PCIE_CTRL1_WAKE_B_LSIO_GPIO4_IO31		0x04000021
+			IMX8QM_PCIE_CTRL1_PERST_B_LSIO_GPIO5_IO00		0x06000021
+		>;
+	};
+
+	pinctrl_pwm_lvds0: pwmlvds0grp {
+		fsl,pins = <
+			IMX8QM_LVDS0_GPIO00_LVDS0_PWM0_OUT		0x00000020
+		>;
+	};
+
+	pinctrl_pwm_lvds1: pwmlvds1grp {
+		fsl,pins = <
+			IMX8QM_LVDS1_GPIO00_LVDS1_PWM0_OUT		0x00000020
+		>;
+	};
+
+	pinctrl_sai0: sai0grp {
+		fsl,pins = <
+			IMX8QM_SPI0_CS1_AUD_SAI0_TXC				0x0600004c
+			IMX8QM_SPI2_CS1_AUD_SAI0_TXFS				0x0600004c
+			IMX8QM_SAI1_RXFS_AUD_SAI0_RXD				0x0600004c
+			IMX8QM_SAI1_RXC_AUD_SAI0_TXD				0x0600006c
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			IMX8QM_SAI1_RXD_AUD_SAI1_RXD				0x06000040
+			IMX8QM_SAI1_TXFS_AUD_SAI1_TXFS				0x06000040
+			IMX8QM_SAI1_TXD_AUD_SAI1_TXD				0x06000060
+			IMX8QM_SAI1_TXC_AUD_SAI1_TXC				0x06000040
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			IMX8QM_QSPI1A_DATA0_LSIO_GPIO4_IO26		0x00000021
+		>;
+	};
+
+	pinctrl_typec_mux: typecmuxgrp {
+		fsl,pins = <
+			IMX8QM_QSPI1A_SS0_B_LSIO_GPIO4_IO19		0x60
+			IMX8QM_USB_SS3_TC3_LSIO_GPIO4_IO06		0x60
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK				0x06000041
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi
new file mode 100644
index 000000000000..c9b55f02497a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi
@@ -0,0 +1,473 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+/delete-node/ &acm;
+/delete-node/ &sai4;
+/delete-node/ &sai5;
+/delete-node/ &sai4_lpcg;
+/delete-node/ &sai5_lpcg;
+
+&amix {
+	dais = <&sai6>, <&sai7>;
+};
+
+&asrc0 {
+	clocks = <&asrc0_lpcg IMX_LPCG_CLK_0>,
+		 <&asrc0_lpcg IMX_LPCG_CLK_2>,
+		 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+		 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+		 <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
+		 <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_ASRC_0>;
+};
+
+&asrc0_lpcg {
+	clocks = <&audio_ipg_clk>,
+		 <&audio_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_2>;
+	clock-output-names = "asrc0_lpcg_ipg_clk", "asrc0_lpcg_mem_clk";
+};
+
+&asrc1 {
+	clocks = <&asrc1_lpcg IMX_LPCG_CLK_0>,
+		 <&asrc1_lpcg IMX_LPCG_CLK_2>,
+		 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+		 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+		 <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
+		 <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_ASRC_1>;
+};
+
+&asrc1_lpcg {
+	clocks = <&audio_ipg_clk>, <&audio_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_2>;
+	clock-output-names = "asrc1_lpcg_ipg_clk", "asrc1_lpcg_mem_clk";
+};
+
+&audio_subsys {
+
+	sai4: sai@59080000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59080000 0x10000>;
+		interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai4_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&sai4_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx";
+		dmas = <&edma0 18 0 1>;
+		fsl,dataline = <0 0xf 0x0>;
+		power-domains = <&pd IMX_SC_R_SAI_4>;
+		status = "disabled";
+	};
+
+	sai5: sai@59090000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59090000 0x10000>;
+		interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai5_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&sai5_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "tx";
+		dmas = <&edma0 19 0 0>;
+		fsl,dataline = <0 0x0 0xf>;
+		power-domains = <&pd IMX_SC_R_SAI_5>;
+		status = "disabled";
+	};
+
+	sai4_lpcg: clock-controller@59480000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59480000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI4_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+		clock-output-names = "sai4_lpcg_mclk", "sai4_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_4>;
+		status = "disabled";
+	};
+
+	sai5_lpcg: clock-controller@59490000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59490000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+		clock-output-names = "sai5_lpcg_mclk", "sai5_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_5>;
+		status = "disabled";
+	};
+
+	esai1: esai@59810000 {
+		compatible = "fsl,imx8qm-esai", "fsl,imx6ull-esai";
+		reg = <0x59810000 0x10000>;
+		interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&esai1_lpcg IMX_LPCG_CLK_0>,
+			 <&esai1_lpcg IMX_LPCG_CLK_4>,
+			 <&esai1_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>;
+		clock-names = "core", "extal", "fsys", "spba";
+		dmas = <&edma1 6 0 1>, <&edma1 7 0 0>;
+		dma-names = "rx", "tx";
+		power-domains = <&pd IMX_SC_R_ESAI_1>;
+		status = "disabled";
+	};
+
+	sai6: sai@59820000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59820000 0x10000>;
+		interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai6_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&sai6_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx", "tx";
+		dmas = <&edma1 8 0 1>, <&edma1 9 0 0>;
+		power-domains = <&pd IMX_SC_R_SAI_6>;
+		status = "disabled";
+	};
+
+	sai7: sai@59830000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59830000 0x10000>;
+		interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai7_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&sai7_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "tx";
+		dmas = <&edma1 10 0 0>;
+		power-domains = <&pd IMX_SC_R_SAI_7>;
+		status = "disabled";
+	};
+
+	esai1_lpcg: clock-controller@59c10000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c10000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_ESAI1_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+		clock-output-names = "esai1_lpcg_extal_clk", "esai1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ESAI_1>;
+	};
+
+	sai6_lpcg: clock-controller@59c20000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c20000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI6_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+		clock-output-names = "sai6_lpcg_mclk", "sai6_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_6>;
+	};
+
+	sai7_lpcg: clock-controller@59c30000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c30000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI7_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+		clock-output-names = "sai7_lpcg_mclk", "sai7_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_7>;
+	};
+
+	acm: acm@59e00000 {
+		compatible = "fsl,imx8qm-acm";
+		reg = <0x59e00000 0x1d0000>;
+		#clock-cells = <1>;
+		power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>,
+				<&pd IMX_SC_R_AUDIO_CLK_1>,
+				<&pd IMX_SC_R_MCLK_OUT_0>,
+				<&pd IMX_SC_R_MCLK_OUT_1>,
+				<&pd IMX_SC_R_AUDIO_PLL_0>,
+				<&pd IMX_SC_R_AUDIO_PLL_1>,
+				<&pd IMX_SC_R_ASRC_0>,
+				<&pd IMX_SC_R_ASRC_1>,
+				<&pd IMX_SC_R_ESAI_0>,
+				<&pd IMX_SC_R_ESAI_1>,
+				<&pd IMX_SC_R_SAI_0>,
+				<&pd IMX_SC_R_SAI_1>,
+				<&pd IMX_SC_R_SAI_2>,
+				<&pd IMX_SC_R_SAI_3>,
+				<&pd IMX_SC_R_SAI_4>,
+				<&pd IMX_SC_R_SAI_5>,
+				<&pd IMX_SC_R_SAI_6>,
+				<&pd IMX_SC_R_SAI_7>,
+				<&pd IMX_SC_R_SPDIF_0>,
+				<&pd IMX_SC_R_SPDIF_1>,
+				<&pd IMX_SC_R_MQS_0>;
+		clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_rec1_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_mlb_clk>,
+			 <&clk_hdmi_rx_mclk>,
+			 <&clk_ext_aud_mclk0>,
+			 <&clk_ext_aud_mclk1>,
+			 <&clk_esai0_rx_clk>,
+			 <&clk_esai0_rx_hf_clk>,
+			 <&clk_esai0_tx_clk>,
+			 <&clk_esai0_tx_hf_clk>,
+			 <&clk_esai1_rx_clk>,
+			 <&clk_esai1_rx_hf_clk>,
+			 <&clk_esai1_tx_clk>,
+			 <&clk_esai1_tx_hf_clk>,
+			 <&clk_spdif0_rx>,
+			 <&clk_spdif0_rx>,
+			 <&clk_sai0_rx_bclk>,
+			 <&clk_sai0_tx_bclk>,
+			 <&clk_sai1_rx_bclk>,
+			 <&clk_sai1_tx_bclk>,
+			 <&clk_sai2_rx_bclk>,
+			 <&clk_sai3_rx_bclk>,
+			 <&clk_sai4_rx_bclk>,
+			 <&clk_sai5_rx_bclk>,
+			 <&clk_sai6_rx_bclk>;
+		clock-names = "aud_rec_clk0_lpcg_clk",
+			      "aud_rec_clk1_lpcg_clk",
+			      "aud_pll_div_clk0_lpcg_clk",
+			      "aud_pll_div_clk1_lpcg_clk",
+			      "mlb_clk",
+			      "hdmi_rx_mclk",
+			      "ext_aud_mclk0",
+			      "ext_aud_mclk1",
+			      "esai0_rx_clk",
+			      "esai0_rx_hf_clk",
+			      "esai0_tx_clk",
+			      "esai0_tx_hf_clk",
+			      "esai1_rx_clk",
+			      "esai1_rx_hf_clk",
+			      "esai1_tx_clk",
+			      "esai1_tx_hf_clk",
+			      "spdif0_rx",
+			      "spdif1_rx",
+			      "sai0_rx_bclk",
+			      "sai0_tx_bclk",
+			      "sai1_rx_bclk",
+			      "sai1_tx_bclk",
+			      "sai2_rx_bclk",
+			      "sai3_rx_bclk",
+			      "sai4_rx_bclk",
+			      "sai5_tx_bclk",
+			      "sai6_rx_bclk";
+	};
+};
+
+&dsp_lpcg {
+	status = "disabled";
+};
+
+&dsp_ram_lpcg {
+	status = "disabled";
+};
+
+/* edma2 called in imx8qm RM with the same address in edma0 of imx8qxp */
+&edma0 {
+	reg = <0x591f0000 0x150000>;
+	dma-channels = <20>;
+	dma-channel-mask = <0>;
+	interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* asrc0 */
+		     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, /* esai0 */
+		     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, /* spdif0 */
+		     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, /* spdif1 */
+		     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, /* sai0 */
+		     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, /* sai1 */
+		     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, /* sai2 */
+		     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* sai3 */
+		     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* sai4 */
+		     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; /* sai5 */
+	power-domains = <&pd IMX_SC_R_DMA_2_CH0>,
+			<&pd IMX_SC_R_DMA_2_CH1>,
+			<&pd IMX_SC_R_DMA_2_CH2>,
+			<&pd IMX_SC_R_DMA_2_CH3>,
+			<&pd IMX_SC_R_DMA_2_CH4>,
+			<&pd IMX_SC_R_DMA_2_CH5>,
+			<&pd IMX_SC_R_DMA_2_CH6>,
+			<&pd IMX_SC_R_DMA_2_CH7>,
+			<&pd IMX_SC_R_DMA_2_CH8>,
+			<&pd IMX_SC_R_DMA_2_CH9>,
+			<&pd IMX_SC_R_DMA_2_CH10>,
+			<&pd IMX_SC_R_DMA_2_CH11>,
+			<&pd IMX_SC_R_DMA_2_CH12>,
+			<&pd IMX_SC_R_DMA_2_CH13>,
+			<&pd IMX_SC_R_DMA_2_CH14>,
+			<&pd IMX_SC_R_DMA_2_CH15>,
+			<&pd IMX_SC_R_DMA_2_CH16>,
+			<&pd IMX_SC_R_DMA_2_CH17>,
+			<&pd IMX_SC_R_DMA_2_CH18>,
+			<&pd IMX_SC_R_DMA_2_CH19>;
+};
+
+/* edma3 called in imx8qm RM with the same address in edma1 of imx8qxp */
+&edma1 {
+	reg = <0x599f0000 0xc0000>;
+	dma-channels = <11>;
+	dma-channel-mask = <0xc0>;
+	interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* asrc1 */
+		     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* no used */
+		     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* no used */
+		     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* sai6 */
+		     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; /* sai7 */
+	power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
+			<&pd IMX_SC_R_DMA_3_CH1>,
+			<&pd IMX_SC_R_DMA_3_CH2>,
+			<&pd IMX_SC_R_DMA_3_CH3>,
+			<&pd IMX_SC_R_DMA_3_CH4>,
+			<&pd IMX_SC_R_DMA_3_CH5>,
+			<&pd IMX_SC_R_DMA_3_CH6>,
+			<&pd IMX_SC_R_DMA_3_CH7>,
+			<&pd IMX_SC_R_DMA_3_CH8>,
+			<&pd IMX_SC_R_DMA_3_CH9>,
+			<&pd IMX_SC_R_DMA_3_CH10>;
+};
+
+&esai0 {
+	clocks = <&esai0_lpcg IMX_LPCG_CLK_0>,
+		 <&esai0_lpcg IMX_LPCG_CLK_4>,
+		 <&esai0_lpcg IMX_LPCG_CLK_0>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_ESAI_0>;
+};
+
+&esai0_lpcg {
+	clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+	clock-output-names = "esai0_lpcg_extal_clk", "esai0_lpcg_ipg_clk";
+};
+
+&mqs0_lpcg {
+	clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+	clock-output-names = "mqs0_lpcg_mclk", "mqs0_lpcg_ipg_clk";
+};
+
+&sai0 {
+	clocks = <&sai0_lpcg IMX_LPCG_CLK_0>,
+		 <&clk_dummy>,
+		 <&sai0_lpcg IMX_LPCG_CLK_4>,
+		 <&clk_dummy>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_SAI_0>;
+};
+
+&sai0_lpcg {
+	clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+	clock-output-names = "sai0_lpcg_mclk", "sai0_lpcg_ipg_clk";
+};
+
+&sai1 {
+	clocks = <&sai1_lpcg IMX_LPCG_CLK_0>,
+		 <&clk_dummy>,
+		 <&sai1_lpcg IMX_LPCG_CLK_4>,
+		 <&clk_dummy>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_SAI_1>;
+};
+
+&sai1_lpcg {
+	clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+	clock-output-names = "sai1_lpcg_mclk", "sai1_lpcg_ipg_clk";
+};
+
+&sai2 {
+	clocks = <&sai2_lpcg IMX_LPCG_CLK_0>,
+		 <&clk_dummy>,
+		 <&sai2_lpcg IMX_LPCG_CLK_4>,
+		 <&clk_dummy>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_SAI_2>;
+};
+
+&sai2_lpcg {
+	clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+	clock-output-names = "sai2_lpcg_mclk", "sai2_lpcg_ipg_clk";
+};
+
+&sai3 {
+	clocks = <&sai3_lpcg IMX_LPCG_CLK_0>,
+		 <&clk_dummy>,
+		 <&sai3_lpcg IMX_LPCG_CLK_4>,
+		 <&clk_dummy>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_SAI_3>;
+};
+
+&sai3_lpcg {
+	clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+	clock-output-names = "sai3_lpcg_mclk", "sai3_lpcg_ipg_clk";
+};
+
+&spdif0 {
+	clocks = <&spdif0_lpcg IMX_LPCG_CLK_4>,	/* core */
+		 <&clk_dummy>,			/* rxtx0 */
+		 <&spdif0_lpcg IMX_LPCG_CLK_5>,	/* rxtx1 */
+		 <&clk_dummy>,			/* rxtx2 */
+		 <&clk_dummy>,			/* rxtx3 */
+		 <&clk_dummy>,			/* rxtx4 */
+		 <&audio_ipg_clk>,		/* rxtx5 */
+		 <&clk_dummy>,			/* rxtx6 */
+		 <&clk_dummy>,			/* rxtx7 */
+		 <&clk_dummy>;			/* spba */
+	power-domains = <&pd IMX_SC_R_SPDIF_0>;
+};
+
+&spdif0_lpcg {
+	clock-indices = <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_4>;
+	clock-output-names = "spdif0_lpcg_tx_clk", "spdif0_lpcg_gclkw";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
index ec1639174e2e..ccf9f510e0f8 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
@@ -4,22 +4,31 @@
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
+&usbphy1 {
+	compatible = "fsl,imx8qm-usbphy", "fsl,imx7ulp-usbphy";
+};
+
 &fec1 {
 	compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+	iommus = <&smmu 0x12 0x7f80>;
 };
 
 &fec2 {
 	compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+	iommus = <&smmu 0x12 0x7f80>;
 };
 
 &usdhc1 {
 	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+	iommus = <&smmu 0x11 0x7f80>;
 };
 
 &usdhc2 {
 	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+	iommus = <&smmu 0x11 0x7f80>;
 };
 
 &usdhc3 {
 	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+	iommus = <&smmu 0x11 0x7f80>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
index bbe5f5ecfb92..d4856b8590e0 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -4,6 +4,9 @@
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
+/delete-node/ &adma_pwm;
+/delete-node/ &adma_pwm_lpcg;
+
 &dma_subsys {
 	uart4_lpcg: clock-controller@5a4a0000 {
 		compatible = "fsl,imx8qxp-lpcg";
@@ -16,22 +19,178 @@
 				     "uart4_lpcg_ipg_clk";
 		power-domains = <&pd IMX_SC_R_UART_4>;
 	};
+
+	i2c4: i2c@5a840000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x5a840000 0x4000>;
+		interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&i2c4_lpcg 0>,
+			 <&i2c4_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_I2C_4 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_4>;
+		status = "disabled";
+	};
+
+	i2c4_lpcg: clock-controller@5ac40000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac40000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_I2C_4 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "i2c4_lpcg_clk",
+				     "i2c4_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_I2C_4>;
+	};
+
+	can1_lpcg: clock-controller@5ace0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ace0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>, <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "can1_lpcg_pe_clk",
+				     "can1_lpcg_ipg_clk",
+				     "can1_lpcg_chi_clk";
+		power-domains = <&pd IMX_SC_R_CAN_1>;
+	};
+
+	can2_lpcg: clock-controller@5acf0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5acf0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>, <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "can2_lpcg_pe_clk",
+				     "can2_lpcg_ipg_clk",
+				     "can2_lpcg_chi_clk";
+		power-domains = <&pd IMX_SC_R_CAN_2>;
+	};
+};
+
+&edma2 {
+	reg = <0x5a1f0000 0x170000>;
+	#dma-cells = <3>;
+	dma-channels = <22>;
+	dma-channel-mask = <0xf00>;
+	interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* unused */
+		     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* unused */
+		     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* unused */
+		     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* unused */
+		     <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
+	power-domains = <&pd IMX_SC_R_DMA_0_CH0>,
+			<&pd IMX_SC_R_DMA_0_CH1>,
+			<&pd IMX_SC_R_DMA_0_CH2>,
+			<&pd IMX_SC_R_DMA_0_CH3>,
+			<&pd IMX_SC_R_DMA_0_CH4>,
+			<&pd IMX_SC_R_DMA_0_CH5>,
+			<&pd IMX_SC_R_DMA_0_CH6>,
+			<&pd IMX_SC_R_DMA_0_CH7>,
+			<&pd IMX_SC_R_DMA_0_CH8>,
+			<&pd IMX_SC_R_DMA_0_CH9>,
+			<&pd IMX_SC_R_DMA_0_CH10>,
+			<&pd IMX_SC_R_DMA_0_CH11>,
+			<&pd IMX_SC_R_DMA_0_CH12>,
+			<&pd IMX_SC_R_DMA_0_CH13>,
+			<&pd IMX_SC_R_DMA_0_CH14>,
+			<&pd IMX_SC_R_DMA_0_CH15>,
+			<&pd IMX_SC_R_DMA_0_CH16>,
+			<&pd IMX_SC_R_DMA_0_CH17>,
+			<&pd IMX_SC_R_DMA_0_CH18>,
+			<&pd IMX_SC_R_DMA_0_CH19>,
+			<&pd IMX_SC_R_DMA_0_CH20>,
+			<&pd IMX_SC_R_DMA_0_CH21>;
+	status = "okay";
+};
+
+/* It is eDMA1 in 8QM RM, but 8QXP it is eDMA3 */
+&edma3 {
+	reg = <0x5a9f0000 0x210000>;
+	dma-channels = <10>;
+	interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
+	power-domains = <&pd IMX_SC_R_DMA_1_CH0>,
+			<&pd IMX_SC_R_DMA_1_CH1>,
+			<&pd IMX_SC_R_DMA_1_CH2>,
+			<&pd IMX_SC_R_DMA_1_CH3>,
+			<&pd IMX_SC_R_DMA_1_CH4>,
+			<&pd IMX_SC_R_DMA_1_CH5>,
+			<&pd IMX_SC_R_DMA_1_CH6>,
+			<&pd IMX_SC_R_DMA_1_CH7>,
+			<&pd IMX_SC_R_DMA_1_CH8>,
+			<&pd IMX_SC_R_DMA_1_CH9>;
+};
+
+&flexcan1 {
+	fsl,clk-source = /bits/ 8 <1>;
+};
+
+&flexcan2 {
+	clocks = <&can1_lpcg IMX_LPCG_CLK_4>,
+		 <&can1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>;
+	fsl,clk-source = /bits/ 8 <1>;
+};
+
+&flexcan3 {
+	clocks = <&can2_lpcg IMX_LPCG_CLK_4>,
+		 <&can2_lpcg IMX_LPCG_CLK_0>;
+	assigned-clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>;
+	fsl,clk-source = /bits/ 8 <1>;
 };
 
 &lpuart0 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+	dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
+	dma-names = "rx","tx";
 };
 
 &lpuart1 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+	dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
+	dma-names = "rx","tx";
 };
 
 &lpuart2 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+	dmas = <&edma2 17 0 0>, <&edma2 16 0 1>;
+	dma-names = "rx","tx";
 };
 
 &lpuart3 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+	dmas = <&edma2 19 0 0>, <&edma2 18 0 1>;
+	dma-names = "rx","tx";
 };
 
 &i2c0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
new file mode 100644
index 000000000000..bd6e0aa27efe
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ *	Richard Zhu <hongxing.zhu@nxp.com>
+ */
+
+&hsio_subsys {
+	compatible = "simple-bus";
+	ranges = <0x5f000000 0x0 0x5f000000 0x01000000>,
+		 <0x40000000 0x0 0x60000000 0x10000000>,
+		 <0x80000000 0x0 0x70000000 0x10000000>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	pcie0: pciea: pcie@5f000000 {
+		compatible = "fsl,imx8q-pcie";
+		reg = <0x5f000000 0x10000>,
+		      <0x4ff00000 0x80000>;
+		reg-names = "dbi", "config";
+		ranges = <0x81000000 0 0x00000000 0x4ff80000 0 0x00010000>,
+			 <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>;
+		#interrupt-cells = <1>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		clocks = <&pciea_lpcg IMX_LPCG_CLK_6>,
+			 <&pciea_lpcg IMX_LPCG_CLK_4>,
+			 <&pciea_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "dbi", "mstr", "slv";
+		bus-range = <0x00 0xff>;
+		device_type = "pci";
+		interrupt-map = <0 0 0 1 &gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		num-lanes = <1>;
+		num-viewport = <4>;
+		power-domains = <&pd IMX_SC_R_PCIE_A>;
+		fsl,max-link-speed = <3>;
+		status = "disabled";
+	};
+
+	pcie0_ep: pciea_ep: pcie-ep@5f000000 {
+		compatible = "fsl,imx8q-pcie-ep";
+		reg = <0x5f000000 0x00010000>,
+		      <0x40000000 0x10000000>;
+		reg-names = "dbi", "addr_space";
+		num-lanes = <1>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "dma";
+		clocks = <&pciea_lpcg IMX_LPCG_CLK_6>,
+			 <&pciea_lpcg IMX_LPCG_CLK_4>,
+			 <&pciea_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "dbi", "mstr", "slv";
+		power-domains = <&pd IMX_SC_R_PCIE_A>;
+		fsl,max-link-speed = <3>;
+		num-ib-windows = <6>;
+		num-ob-windows = <6>;
+		status = "disabled";
+	};
+
+	pcie1: pcieb: pcie@5f010000 {
+		compatible = "fsl,imx8q-pcie";
+		reg = <0x5f010000 0x10000>,
+		      <0x8ff00000 0x80000>;
+		reg-names = "dbi", "config";
+		ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
+			 <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
+		#interrupt-cells = <1>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi", "dma";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		clocks = <&pcieb_lpcg IMX_LPCG_CLK_6>,
+			 <&pcieb_lpcg IMX_LPCG_CLK_4>,
+			 <&pcieb_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "dbi", "mstr", "slv";
+		bus-range = <0x00 0xff>;
+		device_type = "pci";
+		interrupt-map = <0 0 0 1 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		num-lanes = <1>;
+		num-viewport = <4>;
+		power-domains = <&pd IMX_SC_R_PCIE_B>;
+		fsl,max-link-speed = <3>;
+		status = "disabled";
+	};
+
+	sata: sata@5f020000 {
+		compatible = "fsl,imx8qm-ahci";
+		reg = <0x5f020000 0x10000>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sata_lpcg IMX_LPCG_CLK_4>,
+			 <&sata_crr4_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "sata", "sata_ref";
+		phy-names = "sata-phy", "cali-phy0", "cali-phy1";
+		power-domains = <&pd IMX_SC_R_SATA_0>;
+		/*
+		 * Since "REXT" pin is only present for first lane PHY
+		 * and its calibration result will be stored, and shared
+		 * by the PHY used by SATA.
+		 *
+		 * Add the calibration PHYs for SATA here, although only
+		 * the third lane PHY is used by SATA.
+		 */
+		phys = <&hsio_phy 2 PHY_TYPE_SATA 0>,
+		       <&hsio_phy 0 PHY_TYPE_PCIE 0>,
+		       <&hsio_phy 1 PHY_TYPE_PCIE 1>;
+		status = "disabled";
+	};
+
+	pciea_lpcg: clock-controller@5f050000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f050000 0x10000>;
+		clocks = <&hsio_axi_clk>, <&hsio_axi_clk>, <&hsio_axi_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_6>;
+		clock-output-names = "hsio_pciea_mstr_axi_clk",
+				     "hsio_pciea_slv_axi_clk",
+				     "hsio_pciea_dbi_axi_clk";
+		power-domains = <&pd IMX_SC_R_PCIE_A>;
+	};
+
+	sata_lpcg: clock-controller@5f070000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f070000 0x10000>;
+		clocks = <&hsio_axi_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_sata_clk";
+		power-domains = <&pd IMX_SC_R_SATA_0>;
+	};
+
+	phyx2_lpcg: clock-controller@5f080000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f080000 0x10000>;
+		clocks = <&hsio_refa_clk>, <&hsio_per_clk>,
+			 <&hsio_refa_clk>, <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "hsio_phyx2_pclk_0",
+				     "hsio_phyx2_pclk_1",
+				     "hsio_phyx2_apbclk_0",
+				     "hsio_phyx2_apbclk_1";
+		power-domains = <&pd IMX_SC_R_SERDES_0>;
+	};
+
+	phyx1_lpcg: clock-controller@5f090000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f090000 0x10000>;
+		clocks = <&hsio_refa_clk>, <&hsio_per_clk>,
+			 <&hsio_per_clk>, <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_phyx1_pclk",
+				     "hsio_phyx1_epcs_tx_clk",
+				     "hsio_phyx1_epcs_rx_clk",
+				     "hsio_phyx1_apb_clk";
+		power-domains = <&pd IMX_SC_R_SERDES_1>;
+	};
+
+	phyx2_crr0_lpcg: clock-controller@5f0a0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f0a0000 0x10000>;
+		clocks = <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_phyx2_per_clk";
+		power-domains = <&pd IMX_SC_R_SERDES_0>;
+	};
+
+	pciea_crr2_lpcg: clock-controller@5f0c0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f0c0000 0x10000>;
+		clocks = <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_pciea_per_clk";
+		power-domains = <&pd IMX_SC_R_PCIE_A>;
+	};
+
+	sata_crr4_lpcg: clock-controller@5f0e0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f0e0000 0x10000>;
+		clocks = <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_sata_per_clk";
+		power-domains = <&pd IMX_SC_R_SATA_0>;
+	};
+
+	hsio_phy: phy@5f180000 {
+		compatible = "fsl,imx8qm-hsio";
+		reg = <0x5f180000 0x30000>,
+		      <0x5f110000 0x20000>,
+		      <0x5f130000 0x30000>,
+		      <0x5f160000 0x10000>;
+		reg-names = "reg", "phy", "ctrl", "misc";
+		clocks = <&phyx2_lpcg IMX_LPCG_CLK_0>,
+			 <&phyx2_lpcg IMX_LPCG_CLK_1>,
+			 <&phyx2_lpcg IMX_LPCG_CLK_4>,
+			 <&phyx2_lpcg IMX_LPCG_CLK_5>,
+			 <&phyx1_lpcg IMX_LPCG_CLK_0>,
+			 <&phyx1_lpcg IMX_LPCG_CLK_1>,
+			 <&phyx1_lpcg IMX_LPCG_CLK_2>,
+			 <&phyx1_lpcg IMX_LPCG_CLK_4>,
+			 <&phyx2_crr0_lpcg IMX_LPCG_CLK_4>,
+			 <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>,
+			 <&pciea_crr2_lpcg IMX_LPCG_CLK_4>,
+			 <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>,
+			 <&sata_crr4_lpcg IMX_LPCG_CLK_4>,
+			 <&misc_crr5_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "pclk0", "pclk1", "apb_pclk0", "apb_pclk1",
+			      "pclk2", "epcs_tx", "epcs_rx", "apb_pclk2",
+			      "phy0_crr", "phy1_crr", "ctl0_crr",
+			      "ctl1_crr", "ctl2_crr", "misc_crr";
+		#phy-cells = <3>;
+		power-domains = <&pd IMX_SC_R_SERDES_0>, <&pd IMX_SC_R_SERDES_1>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
index 7764b4146e0a..4b7e685daa02 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
@@ -3,10 +3,89 @@
  * Copyright 2021 NXP
  */
 
+&isi {
+	compatible = "fsl,imx8qm-isi";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@2 {
+			reg = <2>;
+
+			isi_in_2: endpoint {
+				remote-endpoint = <&mipi_csi0_out>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			isi_in_3: endpoint {
+				remote-endpoint = <&mipi_csi1_out>;
+			};
+		};
+	};
+};
+
 &jpegdec {
 	compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgdec";
 };
 
 &jpegenc {
-	compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgenc";
+	compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
+};
+
+&mipi_csi_0 {
+	compatible = "fsl,imx8qm-mipi-csi2", "fsl,imx8qxp-mipi-csi2";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+		};
+
+		port@1 {
+			reg = <1>;
+
+			mipi_csi0_out: endpoint {
+				remote-endpoint = <&isi_in_2>;
+			};
+		};
+	};
+};
+
+&mipi_csi_1 {
+	compatible = "fsl,imx8qm-mipi-csi2", "fsl,imx8qxp-mipi-csi2";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+		};
+
+		port@1 {
+			reg = <1>;
+
+			mipi_csi1_out: endpoint {
+				remote-endpoint = <&isi_in_3>;
+			};
+		};
+	};
+};
+
+&pi0_ipg_lpcg {
+	status = "disabled";
+};
+
+&pi0_misc_lpcg {
+	status = "disabled";
+};
+
+&pi0_pxl_lpcg {
+	status = "disabled";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
index 669aa14ce9f7..b483134f84d1 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
@@ -6,30 +6,68 @@
 
 &lsio_gpio0 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 0 6>,
+		      <&iomuxc 6 7 22>,
+		      <&iomuxc 28 36 4>;
 };
 
 &lsio_gpio1 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 40 4>,
+		      <&iomuxc 4 50 12>,
+		      <&iomuxc 16 63 8>,
+		      <&iomuxc 24 72 8>;
 };
 
 &lsio_gpio2 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 80 4>,
+		      <&iomuxc 4 85 18>,
+		      <&iomuxc 22 104 10>;
 };
 
 &lsio_gpio3 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 114 2>,
+		      <&iomuxc 2 117 16>,
+		      <&iomuxc 18 141 1>,
+		      <&iomuxc 19 140 1>,
+		      <&iomuxc 20 139 1>,
+		      <&iomuxc 21 138 1>,
+		      <&iomuxc 22 137 1>,
+		      <&iomuxc 23 136 1>,
+		      <&iomuxc 24 135 1>,
+		      <&iomuxc 25 134 1>,
+		      <&iomuxc 26 142 3>,
+		      <&iomuxc 29 146 3>;
 };
 
 &lsio_gpio4 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 149 3>,
+		      <&iomuxc 3 153 4>,
+		      <&iomuxc 7 158 6>,
+		      <&iomuxc 13 165 6>,
+		      <&iomuxc 19 172 8>,
+		      <&iomuxc 27 198 5>;
 };
 
 &lsio_gpio5 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 203 1>,
+		      <&iomuxc 1 205 2>,
+		      <&iomuxc 3 210 11>,
+		      <&iomuxc 14 223 3>,
+		      <&iomuxc 17 227 2>,
+		      <&iomuxc 19 230 5>,
+		      <&iomuxc 24 236 6>,
+		      <&iomuxc 30 243 2>;
 };
 
 &lsio_gpio6 {
 	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 245 10>,
+		      <&iomuxc 10 256 12>;
 };
 
 &lsio_gpio7 {
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi
new file mode 100644
index 000000000000..0514d8b2af75
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright 2024 NXP
+ */
+
+&qm_lvds0_lis_lpcg {
+	clocks = <&lvds_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_4>;
+};
+
+&qm_lvds0_pwm_lpcg {
+	clocks = <&clk IMX_SC_R_LVDS_0_PWM_0 IMX_SC_PM_CLK_PER>,
+		 <&lvds_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+};
+
+&qm_lvds0_i2c0_lpcg {
+	clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>,
+		 <&lvds_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+};
+
+&qm_pwm_lvds0 {
+	clocks = <&qm_lvds0_pwm_lpcg IMX_LPCG_CLK_4>,
+		 <&qm_lvds0_pwm_lpcg IMX_LPCG_CLK_0>;
+};
+
+&qm_i2c0_lvds0 {
+	clocks = <&qm_lvds0_i2c0_lpcg IMX_LPCG_CLK_0>,
+		 <&qm_lvds0_i2c0_lpcg IMX_LPCG_CLK_4>;
+};
+
+&lvds0_subsys {
+	interrupt-parent = <&irqsteer_lvds0>;
+
+	irqsteer_lvds0: interrupt-controller@56240000 {
+		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x56240000 0x1000>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <1>;
+		clocks = <&qm_lvds0_lis_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+	};
+
+	lvds0_i2c1_lpcg: clock-controller@56243014 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x56243014 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&lvds_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "lvds0_i2c1_lpcg_clk",
+				     "lvds0_i2c1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_LVDS_0_I2C_0>;
+	};
+
+	i2c1_lvds0: i2c@56247000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x56247000 0x1000>;
+		interrupts = <9>;
+		clocks = <&lvds0_i2c1_lpcg IMX_LPCG_CLK_0>,
+			 <&lvds0_i2c1_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_LVDS_0_I2C_0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-mipi.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-mipi.dtsi
new file mode 100644
index 000000000000..f4c393fe7204
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-mipi.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright 2024 NXP
+ */
+
+&mipi0_lis_lpcg {
+	clocks = <&dsi_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_0>;
+	clock-output-names = "mipi0_lis_lpcg_ipg_clk";
+};
+
+&mipi0_pwm_lpcg {
+	clocks = <&clk IMX_SC_R_MIPI_0_PWM_0 IMX_SC_PM_CLK_PER>,
+		 <&dsi_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+	clock-output-names = "mipi0_pwm_lpcg_clk",
+			     "mipi0_pwm_lpcg_ipg_clk";
+};
+\ No newline at end of file
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index c9c2b6536233..5206ca82eaf6 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/pads-imx8qm.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -23,6 +24,13 @@
 		serial1 = &lpuart1;
 		serial2 = &lpuart2;
 		serial3 = &lpuart3;
+		spi0 = &lpspi0;
+		spi1 = &lpspi1;
+		spi2 = &lpspi2;
+		spi3 = &lpspi3;
+		vpu-core0 = &vpu_core0;
+		vpu-core1 = &vpu_core1;
+		vpu-core2 = &vpu_core2;
 	};
 
 	cpus {
@@ -59,6 +67,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
+			clocks = <&clk IMX_SC_R_A53 IMX_SC_PM_CLK_CPU>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
@@ -67,12 +76,15 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		A53_1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
+			clocks = <&clk IMX_SC_R_A53 IMX_SC_PM_CLK_CPU>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
@@ -81,12 +93,15 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		A53_2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
+			clocks = <&clk IMX_SC_R_A53 IMX_SC_PM_CLK_CPU>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
@@ -95,12 +110,15 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		A53_3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
+			clocks = <&clk IMX_SC_R_A53 IMX_SC_PM_CLK_CPU>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
@@ -109,12 +127,15 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		A72_0: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x0 0x100>;
+			clocks = <&clk IMX_SC_R_A72 IMX_SC_PM_CLK_CPU>;
 			enable-method = "psci";
 			i-cache-size = <0xC000>;
 			i-cache-line-size = <64>;
@@ -123,19 +144,25 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&A72_L2>;
+			operating-points-v2 = <&a72_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		A72_1: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x0 0x101>;
+			clocks = <&clk IMX_SC_R_A72 IMX_SC_PM_CLK_CPU>;
 			enable-method = "psci";
 			next-level-cache = <&A72_L2>;
+			operating-points-v2 = <&a72_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		A53_L2: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -144,12 +171,73 @@
 		A72_L2: l2-cache1 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x100000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
 		};
 	};
 
+	a53_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-896000000 {
+			opp-hz = /bits/ 64 <896000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	a72_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1296000000 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1596000000 {
+			opp-hz = /bits/ 64 <1596000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
 	gic: interrupt-controller@51a00000 {
 		compatible = "arm,gic-v3";
 		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
@@ -157,6 +245,7 @@
 		      <0x0 0x52000000 0 0x2000>,  /* GICC */
 		      <0x0 0x52010000 0 0x1000>,  /* GICH */
 		      <0x0 0x52020000 0 0x20000>; /* GICV */
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -181,6 +270,47 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
 	};
 
+	smmu: iommu@51400000 {
+		compatible = "arm,mmu-500";
+		interrupt-parent = <&gic>;
+		reg = <0 0x51400000 0 0x40000>;
+		#global-interrupts = <1>;
+		#iommu-cells = <2>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	system-controller {
 		compatible = "fsl,imx-scu";
 		mbox-names = "tx0",
@@ -204,19 +334,318 @@
 			compatible = "fsl,imx8qm-iomuxc";
 		};
 
+		scu_reset: reset-controller {
+			compatible = "fsl,imx-scu-reset";
+			#reset-cells = <1>;
+		};
+
 		rtc: rtc {
 			compatible = "fsl,imx8qxp-sc-rtc";
 		};
+
+		ocotp: ocotp {
+			compatible = "fsl,imx8qm-scu-ocotp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			read-only;
+
+			fec_mac0: mac@1c4 {
+				reg = <0x1c4 6>;
+			};
+
+			fec_mac1: mac@1c6 {
+				reg = <0x1c6 6>;
+			};
+		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+
+		watchdog {
+			compatible = "fsl,imx8qm-sc-wdt", "fsl,imx-sc-wdt";
+			timeout-sec = <60>;
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_A53>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_A72>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit1: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert1>;
+					cooling-device =
+						<&A72_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A72_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_GPU_0_PID0>;
+
+			trips {
+				gpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+	       gpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_GPU_1_PID0>;
+
+			trips {
+				gpu_alert1: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit1: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		drc0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_DRC_0>;
+
+			trips {
+				drc_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				drc_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	clk_dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "clk_dummy";
+	};
+
+	clk_esai1_rx_clk: clock-esai1-rx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "esai1_rx_clk";
+	};
+
+	clk_esai1_rx_hf_clk: clock-esai1-rx-hf {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "esai1_rx_hf_clk";
+	};
+
+	clk_esai1_tx_clk: clock-esai1-tx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "esai1_tx_clk";
+	};
+
+	clk_esai1_tx_hf_clk: clock-esai1-tx-hf {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "esai1_tx_hf_clk";
+	};
+
+	clk_hdmi_rx_mclk: clock-hdmi-rx-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "hdmi-rx-mclk";
+	};
+
+	clk_mlb_clk: clock-mlb-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "mlb_clk";
+	};
+
+	clk_sai5_rx_bclk: clock-sai5-rx-bclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai5_rx_bclk";
+	};
+
+	clk_sai5_tx_bclk: clock-sai5-tx-bclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai5_tx_bclk";
+	};
+
+	clk_sai6_rx_bclk: clock-sai6-rx-bclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai6_rx_bclk";
+	};
+
+	clk_sai6_tx_bclk: clock-sai6-tx-bclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai6_tx_bclk";
+	};
+
+	clk_spdif1_rx: clock-spdif1-rx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "spdif1_rx";
+	};
+
+	lvds_ipg_clk: clock-controller-lvds-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "lvds0_ipg_clk";
+	};
+
+	dsi_ipg_clk: clock-controller-dsi-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <120000000>;
+		clock-output-names = "dsi_ipg_clk";
+	};
+
+	mipi_pll_div2_clk: clock-controller-mipi-div2-pll {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <432000000>;
+		clock-output-names = "mipi_pll_div2_clk";
+	};
+
+	vpu_subsys_dsp: bus@55000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x55000000 0x0 0x55000000 0x1000000>;
+
+		vpu_dsp: dsp@556e8000 {
+			compatible = "fsl,imx8qm-hifi4";
+			reg = <0x556e8000 0x88000>;
+			clocks = <&clk_dummy>,
+				 <&clk_dummy>,
+				 <&clk_dummy>;
+			clock-names = "ipg", "ocram", "core";
+			power-domains = <&pd IMX_SC_R_MU_13B>,
+					<&pd IMX_SC_R_DSP>,
+					<&pd IMX_SC_R_DSP_RAM>,
+					<&pd IMX_SC_R_MU_2A>;
+			mboxes = <&lsio_mu13 0 0>,
+				 <&lsio_mu13 1 0>,
+				 <&lsio_mu13 3 0>;
+			mbox-names = "tx", "rx", "rxdb";
+			firmware-name = "imx/dsp/hifi4.bin";
+			status = "disabled";
+		};
 	};
 
 	/* sorted in register address */
+	#include "imx8-ss-security.dtsi"
+	#include "imx8-ss-cm41.dtsi"
+	#include "imx8-ss-audio.dtsi"
+	#include "imx8-ss-vpu.dtsi"
+	#include "imx8-ss-gpu0.dtsi"
+	#include "imx8-ss-mipi0.dtsi"
+	#include "imx8-ss-lvds0.dtsi"
+	#include "imx8-ss-mipi1.dtsi"
+	#include "imx8-ss-lvds1.dtsi"
 	#include "imx8-ss-img.dtsi"
 	#include "imx8-ss-dma.dtsi"
 	#include "imx8-ss-conn.dtsi"
 	#include "imx8-ss-lsio.dtsi"
+	#include "imx8-ss-hsio.dtsi"
 };
 
 #include "imx8qm-ss-img.dtsi"
 #include "imx8qm-ss-dma.dtsi"
 #include "imx8qm-ss-conn.dtsi"
 #include "imx8qm-ss-lsio.dtsi"
+#include "imx8qm-ss-audio.dtsi"
+#include "imx8qm-ss-lvds.dtsi"
+#include "imx8qm-ss-mipi.dtsi"
+#include "imx8qm-ss-hsio.dtsi"
+
+/delete-node/ &dsp;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
index 7d00e17f0447..50bf7919c863 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
@@ -180,7 +180,7 @@
 		>;
 	};
 
-	pinctrl_leds: ledsgrp{
+	pinctrl_leds: ledsgrp {
 		fsl,pins = <
 			IMX8QXP_ESAI0_TX2_RX3_LSIO_GPIO0_IO06			0x00000021
 			IMX8QXP_ESAI0_TX3_RX2_LSIO_GPIO0_IO07			0x00000021
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dts
new file mode 100644
index 000000000000..966ecfb2a17e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-colibri.dtsi"
+#include "imx8x-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8QXP on Aster Board";
+	compatible = "toradex,colibri-imx8x-aster",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts
index 6b21a295c126..fe4597a6f7e0 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright 2019 Toradex
  */
@@ -6,10 +6,10 @@
 /dts-v1/;
 
 #include "imx8qxp-colibri.dtsi"
-#include "imx8qxp-colibri-eval-v3.dtsi"
+#include "imx8x-colibri-eval-v3.dtsi"
 
 / {
-	model = "Toradex Colibri iMX8QXP/DX on Colibri Evaluation Board V3";
+	model = "Toradex Colibri iMX8QXP on Colibri Evaluation Board V3";
 	compatible = "toradex,colibri-imx8x-eval-v3",
 		     "toradex,colibri-imx8x", "fsl,imx8qxp";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
deleted file mode 100644
index a08e70fb7c7a..000000000000
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2019 Toradex
- */
-
-#include "dt-bindings/input/linux-event-codes.h"
-
-/ {
-	aliases {
-		rtc0 = &rtc_i2c;
-		rtc1 = &rtc;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys>;
-
-		key-wakeup {
-			label = "Wake-Up";
-			gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-/* Colibri UART_B */
-&lpuart0 {
-	status = "okay";
-};
-
-/* Colibri UART_C */
-&lpuart2 {
-	status = "okay";
-};
-
-/* Colibri UART_A */
-&lpuart3 {
-	status = "okay";
-};
-
-/* Colibri FastEthernet */
-&fec1 {
-	status = "okay";
-};
-
-/* Colibri SD/MMC Card */
-&usdhc2 {
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris-v2.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris-v2.dts
new file mode 100644
index 000000000000..cca33213fa9b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris-v2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-colibri.dtsi"
+#include "imx8x-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8QXP on Colibri Iris V2 Board";
+	compatible = "toradex,colibri-imx8x-iris-v2",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris.dts
new file mode 100644
index 000000000000..fed75b5d4a1c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-colibri.dtsi"
+#include "imx8x-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8QXP on Colibri Iris Board";
+	compatible = "toradex,colibri-imx8x-iris",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
index 89d70e030433..0f1aa31dd3e5 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
@@ -1,598 +1,12 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright 2019 Toradex
  */
 
 #include "imx8qxp.dtsi"
+#include "imx8x-colibri.dtsi"
 
 / {
-	model = "Toradex Colibri iMX8QXP/DX Module";
+	model = "Toradex Colibri iMX8QXP Module";
 	compatible = "toradex,colibri-imx8x", "fsl,imx8qxp";
-
-	chosen {
-		stdout-path = &lpuart3;
-	};
-
-	reg_module_3v3: regulator-module-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "+V3.3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-/* On-module I2C */
-&i2c0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c0>, <&pinctrl_sgtl5000_usb_clk>;
-	status = "okay";
-
-	/* Touch controller */
-	touchscreen@2c {
-		compatible = "adi,ad7879-1";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ad7879_int>;
-		reg = <0x2c>;
-		interrupt-parent = <&lsio_gpio3>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-		touchscreen-max-pressure = <4096>;
-		adi,resistance-plate-x = <120>;
-		adi,first-conversion-delay = /bits/ 8 <3>;
-		adi,acquisition-time = /bits/ 8 <1>;
-		adi,median-filter-size = /bits/ 8 <2>;
-		adi,averaging = /bits/ 8 <1>;
-		adi,conversion-interval = /bits/ 8 <255>;
-	};
-};
-
-/* Colibri I2C */
-&i2c1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-};
-
-/* Colibri UART_B */
-&lpuart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lpuart0>;
-};
-
-/* Colibri UART_C */
-&lpuart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lpuart2>;
-};
-
-/* Colibri UART_A */
-&lpuart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>;
-};
-
-/* Colibri FastEthernet */
-&fec1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_fec1>;
-	pinctrl-1 = <&pinctrl_fec1_sleep>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	fsl,magic-packet;
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@2 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			max-speed = <100>;
-			reg = <2>;
-		};
-	};
-};
-
-/* On-module eMMC */
-&usdhc1 {
-	bus-width = <8>;
-	non-removable;
-	no-sd;
-	no-sdio;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	status = "okay";
-};
-
-/* Colibri SD/MMC Card */
-&usdhc2 {
-	bus-width = <4>;
-	cd-gpios = <&lsio_gpio3 9 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_module_3v3>;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
-	disable-wp;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>;
-
-	/* On-module touch pen-down interrupt */
-	pinctrl_ad7879_int: ad7879intgrp {
-		fsl,pins = <
-			IMX8QXP_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05	0x21
-		>;
-	};
-
-	/* Colibri Analogue Inputs */
-	pinctrl_adc0: adc0grp {
-		fsl,pins = <
-			IMX8QXP_ADC_IN0_ADMA_ADC_IN0			0x60		/* SODIMM   8 */
-			IMX8QXP_ADC_IN1_ADMA_ADC_IN1			0x60		/* SODIMM   6 */
-			IMX8QXP_ADC_IN4_ADMA_ADC_IN4			0x60		/* SODIMM   4 */
-			IMX8QXP_ADC_IN5_ADMA_ADC_IN5			0x60		/* SODIMM   2 */
-		>;
-	};
-
-	pinctrl_can_int: canintgrp {
-		fsl,pins = <
-			IMX8QXP_QSPI0A_DQS_LSIO_GPIO3_IO13		0x40		/* SODIMM  73 */
-		>;
-	};
-
-	pinctrl_csi_ctl: csictlgrp {
-		fsl,pins = <
-			IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14		0x20		/* SODIMM  77 */
-			IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15		0x20		/* SODIMM  89 */
-		>;
-	};
-
-	pinctrl_ext_io0: extio0grp {
-		fsl,pins = <
-			IMX8QXP_ENET0_RGMII_RXD3_LSIO_GPIO5_IO08	0x06000040	/* SODIMM 135 */
-		>;
-	};
-
-	/* Colibri Ethernet: On-module 100Mbps PHY Micrel KSZ8041 */
-	pinctrl_fec1: fec1grp {
-		fsl,pins = <
-			IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000020
-			IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
-			IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x61
-			IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT		0x06000061
-			IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x61
-			IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x61
-			IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x61
-			IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x61
-			IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x61
-			IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER		0x61
-		>;
-	};
-
-	pinctrl_fec1_sleep: fec1slpgrp {
-		fsl,pins = <
-			IMX8QXP_ENET0_MDC_LSIO_GPIO5_IO11		0x06000041
-			IMX8QXP_ENET0_MDIO_LSIO_GPIO5_IO10		0x06000041
-			IMX8QXP_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30	0x41
-			IMX8QXP_ENET0_RGMII_TXC_LSIO_GPIO4_IO29		0x41
-			IMX8QXP_ENET0_RGMII_TXD0_LSIO_GPIO4_IO31	0x41
-			IMX8QXP_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00	0x41
-			IMX8QXP_ENET0_RGMII_RX_CTL_LSIO_GPIO5_IO04	0x41
-			IMX8QXP_ENET0_RGMII_RXD0_LSIO_GPIO5_IO05	0x41
-			IMX8QXP_ENET0_RGMII_RXD1_LSIO_GPIO5_IO06	0x41
-			IMX8QXP_ENET0_RGMII_RXD2_LSIO_GPIO5_IO07	0x41
-		>;
-	};
-
-	/* Colibri optional CAN on UART_B RTS/CTS */
-	pinctrl_flexcan1: flexcan0grp {
-		fsl,pins = <
-			IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX		0x21		/* SODIMM  32 */
-			IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX		0x21		/* SODIMM  34 */
-		>;
-	};
-
-	/* Colibri optional CAN on PS2 */
-	pinctrl_flexcan2: flexcan1grp {
-		fsl,pins = <
-			IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX		0x21		/* SODIMM  55 */
-			IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX		0x21		/* SODIMM  63 */
-		>;
-	};
-
-	/* Colibri optional CAN on UART_A TXD/RXD */
-	pinctrl_flexcan3: flexcan2grp {
-		fsl,pins = <
-			IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX		0x21		/* SODIMM  35 */
-			IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX		0x21		/* SODIMM  33 */
-		>;
-	};
-
-	/* Colibri LCD Back-Light GPIO */
-	pinctrl_gpio_bl_on: gpioblongrp {
-		fsl,pins = <
-			IMX8QXP_QSPI0A_DATA3_LSIO_GPIO3_IO12		0x60		/* SODIMM  71 */
-		>;
-	};
-
-	pinctrl_gpiokeys: gpiokeysgrp {
-		fsl,pins = <
-			IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10		0x06700041	/* SODIMM  45 */
-		>;
-	};
-
-	pinctrl_hog0: hog0grp {
-		fsl,pins = <
-			IMX8QXP_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02	0x06000020	/* SODIMM  65 */
-			IMX8QXP_CSI_D07_CI_PI_D09			0x61		/* SODIMM  65 */
-			IMX8QXP_QSPI0A_DATA2_LSIO_GPIO3_IO11		0x20		/* SODIMM  69 */
-			IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26		0x20		/* SODIMM  79 */
-			IMX8QXP_CSI_D02_CI_PI_D04			0x61		/* SODIMM  79 */
-			IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03		0x06000020	/* SODIMM  85 */
-			IMX8QXP_CSI_D06_CI_PI_D08			0x61		/* SODIMM  85 */
-			IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17		0x20		/* SODIMM  95 */
-			IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27		0x20		/* SODIMM  97 */
-			IMX8QXP_CSI_D03_CI_PI_D05			0x61		/* SODIMM  97 */
-			IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18		0x20		/* SODIMM  99 */
-			IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28		0x20		/* SODIMM 101 */
-			IMX8QXP_CSI_D00_CI_PI_D02			0x61		/* SODIMM 101 */
-			IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25		0x20		/* SODIMM 103 */
-			IMX8QXP_CSI_D01_CI_PI_D03			0x61		/* SODIMM 103 */
-			IMX8QXP_QSPI0B_DATA1_LSIO_GPIO3_IO19		0x20		/* SODIMM 105 */
-			IMX8QXP_QSPI0B_DATA2_LSIO_GPIO3_IO20		0x20		/* SODIMM 107 */
-			IMX8QXP_USB_SS3_TC2_LSIO_GPIO4_IO05		0x20		/* SODIMM 127 */
-			IMX8QXP_USB_SS3_TC3_LSIO_GPIO4_IO06		0x20		/* SODIMM 131 */
-			IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04		0x20		/* SODIMM 133 */
-			IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00		0x20		/* SODIMM  96 */
-			IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21		0x20		/* SODIMM  98 */
-			IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31		0x20		/* SODIMM 100 */
-			IMX8QXP_QSPI0B_DQS_LSIO_GPIO3_IO22		0x20		/* SODIMM 102 */
-			IMX8QXP_QSPI0B_SS0_B_LSIO_GPIO3_IO23		0x20		/* SODIMM 104 */
-			IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24		0x20		/* SODIMM 106 */
-		>;
-	};
-
-	pinctrl_hog1: hog1grp {
-		fsl,pins = <
-			IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01		0x20		/* SODIMM  75 */
-			IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16		0x20		/* SODIMM  93 */
-		>;
-	};
-
-	/*
-	 * This pin is used in the SCFW as a UART. Using it from
-	 * Linux would require rewritting the SCFW board file.
-	 */
-	pinctrl_hog_scfw: hogscfwgrp {
-		fsl,pins = <
-			IMX8QXP_SCU_GPIO0_00_LSIO_GPIO2_IO03		0x20		/* SODIMM 144 */
-		>;
-	};
-
-	/* On Module I2C */
-	pinctrl_i2c0: i2c0grp {
-		fsl,pins = <
-			IMX8QXP_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL	0x06000021
-			IMX8QXP_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA	0x06000021
-		>;
-	};
-
-	/* MIPI DSI I2C accessible on SODIMM (X1) and FFC (X2) */
-	pinctrl_i2c0_mipi_lvds0: i2c0mipilvds0grp {
-		fsl,pins = <
-			IMX8QXP_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL	0xc6000020	/* SODIMM 140 */
-			IMX8QXP_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA	0xc6000020	/* SODIMM 142 */
-		>;
-	};
-
-	/* MIPI CSI I2C accessible on SODIMM (X1) and FFC (X3) */
-	pinctrl_i2c0_mipi_lvds1: i2c0mipilvds1grp {
-		fsl,pins = <
-			IMX8QXP_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL	0xc6000020	/* SODIMM 186 */
-			IMX8QXP_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA	0xc6000020	/* SODIMM 188 */
-		>;
-	};
-
-	/* Colibri I2C */
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL	0x06000021	/* SODIMM 196 */
-			IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA	0x06000021	/* SODIMM 194 */
-		>;
-	};
-
-	/* Colibri Parallel RGB LCD Interface */
-	pinctrl_lcdif: lcdifgrp {
-		fsl,pins = <
-			IMX8QXP_MCLK_OUT0_ADMA_LCDIF_CLK		0x60		/* SODIMM  56 */
-			IMX8QXP_SPI3_CS0_ADMA_LCDIF_HSYNC		0x60		/* SODIMM  68 */
-			IMX8QXP_MCLK_IN0_ADMA_LCDIF_VSYNC		0x60		/* SODIMM  82 */
-			IMX8QXP_MCLK_IN1_ADMA_LCDIF_EN			0x60		/* SODIMM  44 */
-			IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19		0x60		/* SODIMM  44 */
-			IMX8QXP_ESAI0_FSR_ADMA_LCDIF_D00		0x60		/* SODIMM  76 */
-			IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21		0x60		/* SODIMM  76 */
-			IMX8QXP_ESAI0_FST_ADMA_LCDIF_D01		0x60		/* SODIMM  70 */
-			IMX8QXP_ESAI0_SCKR_ADMA_LCDIF_D02		0x60		/* SODIMM  60 */
-			IMX8QXP_ESAI0_SCKT_ADMA_LCDIF_D03		0x60		/* SODIMM  58 */
-			IMX8QXP_ESAI0_TX0_ADMA_LCDIF_D04		0x60		/* SODIMM  78 */
-			IMX8QXP_ESAI0_TX1_ADMA_LCDIF_D05		0x60		/* SODIMM  72 */
-			IMX8QXP_ESAI0_TX2_RX3_ADMA_LCDIF_D06		0x60		/* SODIMM  80 */
-			IMX8QXP_ESAI0_TX3_RX2_ADMA_LCDIF_D07		0x60		/* SODIMM  46 */
-			IMX8QXP_ESAI0_TX4_RX1_ADMA_LCDIF_D08		0x60		/* SODIMM  62 */
-			IMX8QXP_ESAI0_TX5_RX0_ADMA_LCDIF_D09		0x60		/* SODIMM  48 */
-			IMX8QXP_SPDIF0_RX_ADMA_LCDIF_D10		0x60		/* SODIMM  74 */
-			IMX8QXP_SPDIF0_TX_ADMA_LCDIF_D11		0x60		/* SODIMM  50 */
-			IMX8QXP_SPDIF0_EXT_CLK_ADMA_LCDIF_D12		0x60		/* SODIMM  52 */
-			IMX8QXP_SPI3_SCK_ADMA_LCDIF_D13			0x60		/* SODIMM  54 */
-			IMX8QXP_SPI3_SDO_ADMA_LCDIF_D14			0x60		/* SODIMM  66 */
-			IMX8QXP_SPI3_SDI_ADMA_LCDIF_D15			0x60		/* SODIMM  64 */
-			IMX8QXP_SPI3_CS1_ADMA_LCDIF_D16			0x60		/* SODIMM  57 */
-			IMX8QXP_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01	0x60		/* SODIMM  57 */
-			IMX8QXP_UART1_CTS_B_ADMA_LCDIF_D17		0x60		/* SODIMM  61 */
-		>;
-	};
-
-	/* Colibri SPI */
-	pinctrl_lpspi2: lpspi2grp {
-		fsl,pins = <
-			IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00		0x21		/* SODIMM  86 */
-			IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO			0x06000040	/* SODIMM  92 */
-			IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI			0x06000040	/* SODIMM  90 */
-			IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK			0x06000040	/* SODIMM  88 */
-		>;
-	};
-
-	/* Colibri UART_B */
-	pinctrl_lpuart0: lpuart0grp {
-		fsl,pins = <
-			IMX8QXP_UART0_RX_ADMA_UART0_RX			0x06000020	/* SODIMM  36 */
-			IMX8QXP_UART0_TX_ADMA_UART0_TX			0x06000020	/* SODIMM  38 */
-			IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B		0x06000020	/* SODIMM  34 */
-			IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B		0x06000020	/* SODIMM  32 */
-		>;
-	};
-
-	/* Colibri UART_C */
-	pinctrl_lpuart2: lpuart2grp {
-		fsl,pins = <
-			IMX8QXP_UART2_RX_ADMA_UART2_RX			0x06000020	/* SODIMM  19 */
-			IMX8QXP_UART2_TX_ADMA_UART2_TX			0x06000020	/* SODIMM  21 */
-		>;
-	};
-
-	/* Colibri UART_A */
-	pinctrl_lpuart3: lpuart3grp {
-		fsl,pins = <
-			IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX		0x06000020	/* SODIMM  33 */
-			IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX		0x06000020	/* SODIMM  35 */
-		>;
-	};
-
-	/* Colibri UART_A Control */
-	pinctrl_lpuart3_ctrl: lpuart3ctrlgrp {
-		fsl,pins = <
-			IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00	0x20		/* SODIMM  23 */
-			IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29		0x20		/* SODIMM  25 */
-			IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30		0x20		/* SODIMM  27 */
-			IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03		0x20		/* SODIMM  29 */
-			IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22		0x20		/* SODIMM  31 */
-			IMX8QXP_CSI_EN_LSIO_GPIO3_IO02			0x20		/* SODIMM  37 */
-		>;
-	};
-
-	/* On module wifi module */
-	pinctrl_pcieb: pciebgrp {
-		fsl,pins = <
-			IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01	0x04000061	/* SODIMM 178 */
-			IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02	0x04000061	/* SODIMM  94 */
-			IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00	0x60		/* SODIMM  81 */
-		>;
-	};
-
-	/* Colibri PWM_A */
-	pinctrl_pwm_a: pwmagrp {
-	/* both pins are connected together, reserve the unused CSI_D05 */
-		fsl,pins = <
-			IMX8QXP_CSI_D05_CI_PI_D07			0x61		/* SODIMM  59 */
-			IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT		0x60		/* SODIMM  59 */
-		>;
-	};
-
-	/* Colibri PWM_B */
-	pinctrl_pwm_b: pwmbgrp {
-		fsl,pins = <
-			IMX8QXP_UART1_TX_LSIO_PWM0_OUT			0x60		/* SODIMM  28 */
-		>;
-	};
-
-	/* Colibri PWM_C */
-	pinctrl_pwm_c: pwmcgrp {
-		fsl,pins = <
-			IMX8QXP_UART1_RX_LSIO_PWM1_OUT			0x60		/* SODIMM  30 */
-		>;
-	};
-
-	/* Colibri PWM_D */
-	pinctrl_pwm_d: pwmdgrp {
-	/* both pins are connected together, reserve the unused CSI_D04 */
-		fsl,pins = <
-			IMX8QXP_CSI_D04_CI_PI_D06			0x61		/* SODIMM  67 */
-			IMX8QXP_UART1_RTS_B_LSIO_PWM2_OUT		0x60		/* SODIMM  67 */
-		>;
-	};
-
-	/* On-module I2S */
-	pinctrl_sai0: sai0grp {
-		fsl,pins = <
-			IMX8QXP_SPI0_SDI_ADMA_SAI0_TXD			0x06000040
-			IMX8QXP_SPI0_CS0_ADMA_SAI0_RXD			0x06000040
-			IMX8QXP_SPI0_SCK_ADMA_SAI0_TXC			0x06000040
-			IMX8QXP_SPI0_SDO_ADMA_SAI0_TXFS			0x06000040
-		>;
-	};
-
-	/* Colibri Audio Analogue Microphone GND */
-	pinctrl_sgtl5000: sgtl5000grp {
-		fsl,pins = <
-			/* MIC GND EN */
-			IMX8QXP_MIPI_CSI0_I2C0_SDA_LSIO_GPIO3_IO06	0x41
-		>;
-	};
-
-	/* On-module SGTL5000 clock */
-	pinctrl_sgtl5000_usb_clk: sgtl5000usbclkgrp {
-		fsl,pins = <
-			IMX8QXP_ADC_IN3_ADMA_ACM_MCLK_OUT0		0x21
-		>;
-	};
-
-	/* On-module USB interrupt */
-	pinctrl_usb3503a: usb3503agrp {
-		fsl,pins = <
-			IMX8QXP_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04	0x61
-		>;
-	};
-
-	/* Colibri USB Client Cable Detect */
-	pinctrl_usbc_det: usbcdetgrp {
-		fsl,pins = <
-			IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09	0x06000040	/* SODIMM 137 */
-		>;
-	};
-
-	/* USB Host Power Enable */
-	pinctrl_usbh1_reg: usbh1reggrp {
-		fsl,pins = <
-			IMX8QXP_USB_SS3_TC0_LSIO_GPIO4_IO03		0x06000040	/* SODIMM 129 */
-		>;
-	};
-
-	/* On-module eMMC */
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
-			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD		0x21
-			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21
-			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21
-			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21
-			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21
-			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21
-			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21
-			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21
-			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21
-			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41
-			IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x21
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
-		fsl,pins = <
-			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
-			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD		0x21
-			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21
-			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21
-			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21
-			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21
-			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21
-			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21
-			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21
-			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21
-			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41
-			IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x21
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
-		fsl,pins = <
-			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
-			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD		0x21
-			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21
-			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21
-			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21
-			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21
-			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21
-			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21
-			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21
-			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21
-			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41
-			IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x21
-		>;
-	};
-
-	/* Colibri SD/MMC Card Detect */
-	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
-		fsl,pins = <
-			IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09		0x06000021	/* SODIMM  43 */
-		>;
-	};
-
-	pinctrl_usdhc2_gpio_sleep: usdhc2gpioslpgrp {
-		fsl,pins = <
-			IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09		0x60		/* SODIMM  43 */
-		>;
-	};
-
-	/* Colibri SD/MMC Card */
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041	/* SODIMM  47 */
-			IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x21		/* SODIMM 190 */
-			IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21		/* SODIMM 192 */
-			IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21		/* SODIMM  49 */
-			IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21		/* SODIMM  51 */
-			IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21		/* SODIMM  53 */
-			IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x21
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041	/* SODIMM  47 */
-			IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x21		/* SODIMM 190 */
-			IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21		/* SODIMM 192 */
-			IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21		/* SODIMM  49 */
-			IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21		/* SODIMM  51 */
-			IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21		/* SODIMM  53 */
-			IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x21
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
-		fsl,pins = <
-			IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041	/* SODIMM  47 */
-			IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x21		/* SODIMM 190 */
-			IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21		/* SODIMM 192 */
-			IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21		/* SODIMM  49 */
-			IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21		/* SODIMM  51 */
-			IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21		/* SODIMM  53 */
-			IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x21
-		>;
-	};
-
-	pinctrl_usdhc2_sleep: usdhc2slpgrp {
-		fsl,pins = <
-			IMX8QXP_USDHC1_CLK_LSIO_GPIO4_IO23		0x60		/* SODIMM  47 */
-			IMX8QXP_USDHC1_CMD_LSIO_GPIO4_IO24		0x60		/* SODIMM 190 */
-			IMX8QXP_USDHC1_DATA0_LSIO_GPIO4_IO25		0x60		/* SODIMM 192 */
-			IMX8QXP_USDHC1_DATA1_LSIO_GPIO4_IO26		0x60		/* SODIMM  49 */
-			IMX8QXP_USDHC1_DATA2_LSIO_GPIO4_IO27		0x60		/* SODIMM  51 */
-			IMX8QXP_USDHC1_DATA3_LSIO_GPIO4_IO28		0x60		/* SODIMM  53 */
-			IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x21
-		>;
-	};
-
-	pinctrl_wifi: wifigrp {
-		fsl,pins = <
-			IMX8QXP_SCU_BOOT_MODE3_SCU_DSC_RTC_CLOCK_OUTPUT_32K	0x20
-		>;
-	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso b/arch/arm64/boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso
new file mode 100644
index 000000000000..dd65ed8bb37c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&i2c_mipi_csi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c_mipi_csi0>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ov5640_mipi: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		clocks = <&xtal24m>;
+		clock-names = "xclk";
+		pinctrl-0 = <&pinctrl_mipi_csi0>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lsio_gpio3 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&lsio_gpio3 8 GPIO_ACTIVE_LOW>;
+		AVDD-supply = <&reg_2v8>;
+		DVDD-supply = <&reg_1v5>;
+		DOVDD-supply = <&reg_1v8>;
+
+		port {
+			ov5640_mipi_ep: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&mipi_csi0_in>;
+			};
+		};
+	};
+};
+
+&irqsteer_csi0 {
+	status = "okay";
+};
+
+&isi {
+	status = "okay";
+};
+
+&mipi_csi_0 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_csi0_in: endpoint {
+				data-lanes = <1 2>;
+				remote-endpoint = <&ov5640_mipi_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 07d8dd8160f6..7b0337445541 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -6,15 +6,35 @@
 /dts-v1/;
 
 #include "imx8qxp.dtsi"
+#include <dt-bindings/usb/pd.h>
 
 / {
 	model = "Freescale i.MX8QXP MEK";
 	compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
 
+	bt_sco_codec: audio-codec-bt {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
 	chosen {
 		stdout-path = &lpuart0;
 	};
 
+	imx8x_cm4: imx8x-cm4 {
+		compatible = "fsl,imx8qxp-cm4";
+		mbox-names = "tx", "rx", "rxdb";
+		mboxes = <&lsio_mu5 0 1
+			  &lsio_mu5 1 1
+			  &lsio_mu5 3 1>;
+		memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+				<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+		power-domains = <&pd IMX_SC_R_M4_0_PID0>,
+				<&pd IMX_SC_R_M4_0_MU_1A>;
+		fsl,entry-address = <0x34fe0000>;
+		fsl,resource-id = <IMX_SC_R_M4_0_PID0>;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0 0x40000000>;
@@ -28,9 +48,347 @@
 		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	gpio-sbu-mux {
+		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec_mux>;
+		select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&pca9557_a 7 GPIO_ACTIVE_LOW>;
+		orientation-switch;
+
+		port {
+			usb3_data_ss: endpoint {
+				remote-endpoint = <&typec_con_ss>;
+			};
+		};
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-gpio";
+		mux-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>; /* needs to be an unused GPIO */
+		i2c-parent = <&cm40_i2c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wm8960: audio-codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				clock-names = "mclk";
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				wlf,shared-lrclk;
+				wlf,hp-cfg = <2 2 3>;
+				wlf,gpio-cfg = <1 3>;
+				AVDD-supply = <&reg_audio_3v3>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wm8962: wm8962@1a {
+				compatible = "wlf,wm8962";
+				reg = <0x1a>;
+				clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				AVDD-supply = <&reg_audio_1v8>;
+				CPVDD-supply = <&reg_audio_1v8>;
+				MICVDD-supply = <&reg_audio_3v3>;
+				PLLVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
+			};
+		};
+	};
+
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_2v8: regulator-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	reg_pcieb: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "mpcie_3v3";
+		gpio = <&pca9557_a 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "cs42888_supply";
+	};
+
+	reg_audio_5v: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can-en";
+		gpio = <&pca6416 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can-stby";
+		gpio = <&pca6416 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can_en>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usbotg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_otg1_vbus";
+		gpio = <&pca9557_b 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		vdev0vring0: memory@90000000 {
+			reg = <0 0x90000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: memory@90008000 {
+			reg = <0 0x90008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: memory@90010000 {
+			reg = <0 0x90010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: memory@90018000 {
+			reg = <0 0x90018000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: memory@900ff000 {
+			reg = <0 0x900ff000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: memory@90400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90400000 0 0x100000>;
+			no-map;
+		};
+
+		dsp_vdev0vring0: memory@942f0000 {
+			reg = <0 0x942f0000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0vring1: memory@942f8000 {
+			reg = <0 0x942f8000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0buffer: memory@94300000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x94300000 0 0x100000>;
+			no-map;
+		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0xc0000000 0 0x3c000000>;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+			reusable;
+		};
+
+		gpu_reserved: memory@880000000 {
+			no-map;
+			reg = <0x8 0x80000000 0 0x10000000>;
+		};
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,bitclock-master = <&btcpu>;
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,name = "bt-sco-audio";
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+
+		btcpu: simple-audio-card,cpu {
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+			sound-dai = <&sai0>;
+		};
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx-audio-cs42888";
+		audio-asrc = <&asrc0>;
+		audio-codec = <&cs42888>;
+		audio-cpu = <&esai0>;
+		audio-routing =
+			"Line Out Jack", "AOUT1L",
+			"Line Out Jack", "AOUT1R",
+			"Line Out Jack", "AOUT2L",
+			"Line Out Jack", "AOUT2R",
+			"Line Out Jack", "AOUT3L",
+			"Line Out Jack", "AOUT3R",
+			"Line Out Jack", "AOUT4L",
+			"Line Out Jack", "AOUT4R",
+			"AIN1L", "Line In Jack",
+			"AIN1R", "Line In Jack",
+			"AIN2L", "Line In Jack",
+			"AIN2R", "Line In Jack";
+		model = "imx-cs42888";
+	};
+
+	sound-wm8960 {
+		compatible = "fsl,imx-audio-wm8960";
+		model = "wm8960-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&wm8960>;
+		hp-det-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
+		audio-routing = "Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"Ext Spk", "SPK_LP",
+				"Ext Spk", "SPK_LN",
+				"Ext Spk", "SPK_RP",
+				"Ext Spk", "SPK_RN",
+				"LINPUT1", "Mic Jack",
+				"Mic Jack", "MICB";
+	};
+
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&wm8962>;
+		hp-det-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
+		audio-routing = "Headphone Jack", "HPOUTL",
+				"Headphone Jack", "HPOUTR",
+				"Ext Spk", "SPKOUTL",
+				"Ext Spk", "SPKOUTR",
+				"AMIC", "MICBIAS",
+				"IN3R", "AMIC",
+				"IN1R", "AMIC";
+	};
+};
+
+&amix {
+	status = "okay";
+};
+
+&asrc0 {
+	fsl,asrc-rate = <48000>;
+	status = "okay";
 };
 
 &dsp {
+	memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
+			<&dsp_vdev0vring1>, <&dsp_reserved>;
+	status = "okay";
+};
+
+&dsp_reserved {
+	status = "okay";
+};
+
+&esai0 {
+	assigned-clocks = <&acm IMX_ADMA_ACM_ESAI0_MCLK_SEL>,
+			<&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			<&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			<&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			<&esai0_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-parents = <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <0>, <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-0 = <&pinctrl_esai0>;
+	pinctrl-names = "default";
 	status = "okay";
 };
 
@@ -61,7 +419,7 @@
 	pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9646", "nxp,pca9546";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -127,6 +485,113 @@
 			};
 		};
 	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		reg = <0x50>;
+		interrupt-parent = <&lsio_gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		usb_con1: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_dr_sw: endpoint {
+						remote-endpoint = <&usb3_drd_sw>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+
+};
+
+&cm40_i2c {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_cm40_i2c>;
+	pinctrl-1 = <&pinctrl_cm40_i2c_gpio>;
+	scl-gpios = <&lsio_gpio1 10 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&lsio_gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	cs42888: audio-codec@48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "mclk";
+		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+				<&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+				<&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+				<&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
+		reset-gpios = <&pca9557_b 1 GPIO_ACTIVE_LOW>;
+		VA-supply = <&reg_audio>;
+		VD-supply = <&reg_audio>;
+		VLC-supply = <&reg_audio>;
+		VLS-supply = <&reg_audio>;
+	};
+};
+
+&cm40_intmux {
+	status = "okay";
+};
+
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-x2-pcieb";
+	fsl,refclk-pad-mode = "input";
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&jpegdec {
+	status = "okay";
+};
+
+&jpegenc {
+	status = "okay";
 };
 
 &lpuart0 {
@@ -135,6 +600,22 @@
 	status = "okay";
 };
 
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+	status = "okay";
+};
+
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+	status = "okay";
+};
+
+&lsio_mu5 {
+	status = "okay";
+};
+
 &mu_m0 {
 	status = "okay";
 };
@@ -143,12 +624,78 @@
 	status = "okay";
 };
 
+&pcie0 {
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcieb>;
+	status = "okay";
+};
+
+&pcie0_ep {
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	vpcie-supply = <&reg_pcieb>;
+	status = "disabled";
+};
+
 &scu_key {
 	status = "okay";
 };
 
+&sai0 {
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai0_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai0>;
+	status = "okay";
+};
+
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&sai4 {
+	assigned-clocks = <&acm IMX_ADMA_ACM_SAI4_MCLK_SEL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai4_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-parents = <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <0>, <786432000>, <98304000>, <12288000>, <98304000>;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&sai5 {
+	assigned-clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai5_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-parents = <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <0>, <786432000>, <98304000>, <12288000>, <98304000>;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
 &thermal_zones {
-	pmic-thermal0 {
+	pmic-thermal {
 		polling-delay-passive = <250>;
 		polling-delay = <2000>;
 		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
@@ -204,6 +751,41 @@
 	status = "okay";
 };
 
+&usb3_phy {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&usbotg1 {
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	disable-over-current;
+	power-active-high;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb3_drd_sw: endpoint {
+			remote-endpoint = <&typec_dr_sw>;
+		};
+	};
+};
+
+
 &vpu {
 	compatible = "nxp,imx8qxp-vpu";
 	status = "okay";
@@ -222,6 +804,36 @@
 };
 
 &iomuxc {
+
+	pinctrl_cm40_i2c: cm40i2cgrp {
+		fsl,pins = <
+			IMX8QXP_ADC_IN1_M40_I2C0_SDA                            0x0600004c
+			IMX8QXP_ADC_IN0_M40_I2C0_SCL                            0x0600004c
+		>;
+	};
+
+	pinctrl_cm40_i2c_gpio: cm40i2cgpio-grp {
+		fsl,pins = <
+			IMX8QXP_ADC_IN1_LSIO_GPIO1_IO09				0xc600004c
+			IMX8QXP_ADC_IN0_LSIO_GPIO1_IO10				0xc600004c
+		>;
+	};
+
+	pinctrl_esai0: esai0grp {
+		fsl,pins = <
+			IMX8QXP_ESAI0_FSR_ADMA_ESAI0_FSR           0xc6000040
+			IMX8QXP_ESAI0_FST_ADMA_ESAI0_FST           0xc6000040
+			IMX8QXP_ESAI0_SCKR_ADMA_ESAI0_SCKR         0xc6000040
+			IMX8QXP_ESAI0_SCKT_ADMA_ESAI0_SCKT         0xc6000040
+			IMX8QXP_ESAI0_TX0_ADMA_ESAI0_TX0           0xc6000040
+			IMX8QXP_ESAI0_TX1_ADMA_ESAI0_TX1           0xc6000040
+			IMX8QXP_ESAI0_TX2_RX3_ADMA_ESAI0_TX2_RX3   0xc6000040
+			IMX8QXP_ESAI0_TX3_RX2_ADMA_ESAI0_TX3_RX2   0xc6000040
+			IMX8QXP_ESAI0_TX4_RX1_ADMA_ESAI0_TX4_RX1   0xc6000040
+			IMX8QXP_ESAI0_TX5_RX0_ADMA_ESAI0_TX5_RX0   0xc6000040
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000020
@@ -241,6 +853,27 @@
 		>;
 	};
 
+	pinctrl_flexcan1: flexcan0grp {
+		fsl,pins = <
+			IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX			0x21
+			IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX			0x21
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan1grp {
+		fsl,pins = <
+			IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX			0x21
+			IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX			0x21
+		>;
+	};
+
+	pinctrl_i2c_mipi_csi0: i2c-mipi-csi0grp {
+		fsl,pins = <
+			IMX8QXP_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_I2C0_SCL		0xc2000020
+			IMX8QXP_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_I2C0_SDA		0xc2000020
+		>;
+	};
+
 	pinctrl_ioexp_rst: ioexprstgrp {
 		fsl,pins = <
 			IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01			0x06000021
@@ -267,6 +900,67 @@
 		>;
 	};
 
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <
+			IMX8QXP_UART2_TX_ADMA_UART2_TX          0x06000020
+			IMX8QXP_UART2_RX_ADMA_UART2_RX          0x06000020
+		>;
+	};
+
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <
+			IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX       0x06000020
+			IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX       0x06000020
+		>;
+	};
+
+	pinctrl_mipi_csi0: mipi-csi0grp {
+		fsl,pins = <
+			IMX8QXP_MIPI_CSI0_GPIO0_01_LSIO_GPIO3_IO07		0xC0000041
+			IMX8QXP_MIPI_CSI0_GPIO0_00_LSIO_GPIO3_IO08		0xC0000041
+			IMX8QXP_MIPI_CSI0_MCLK_OUT_MIPI_CSI0_ACM_MCLK_OUT	0xC0000041
+		>;
+	};
+
+	pinctrl_pcieb: pcieagrp {
+		fsl,pins = <
+			IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00		0x06000021
+			IMX8QXP_PCIE_CTRL0_CLKREQ_B_HSIO_PCIE0_CLKREQ_B		0x06000021
+			IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02		0x04000021
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03                        0x06000021
+		>;
+	};
+
+	pinctrl_typec_mux: typecmuxgrp {
+		fsl,pins = <
+			IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09           0x60
+		>;
+	};
+
+	pinctrl_sai0: sai0grp {
+		fsl,pins = <
+			IMX8QXP_SAI0_TXD_ADMA_SAI0_TXD		0x06000060
+			IMX8QXP_SAI0_RXD_ADMA_SAI0_RXD		0x06000040
+			IMX8QXP_SAI0_TXC_ADMA_SAI0_TXC		0x06000040
+			IMX8QXP_SAI0_TXFS_ADMA_SAI0_TXFS	0x06000040
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			IMX8QXP_SAI1_RXD_ADMA_SAI1_RXD     0x06000040
+			IMX8QXP_SAI1_RXC_ADMA_SAI1_TXC     0x06000040
+			IMX8QXP_SAI1_RXFS_ADMA_SAI1_TXFS   0x06000040
+			IMX8QXP_SPI0_CS1_ADMA_SAI1_TXD     0x06000060
+			IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00   0x06000040
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
index 46da21af3702..4eb48ad48745 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
@@ -4,6 +4,10 @@
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
+&usbphy1 {
+	compatible = "fsl,imx8qxp-usbphy", "fsl,imx7ulp-usbphy";
+};
+
 &usdhc1 {
 	compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi
new file mode 100644
index 000000000000..255b8c91c88c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ *	Richard Zhu <hongxing.zhu@nxp.com>
+ */
+
+&hsio_subsys {
+	phyx1_lpcg: clock-controller@5f090000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5f090000 0x10000>;
+		clocks = <&hsio_refb_clk>, <&hsio_per_clk>,
+			 <&hsio_per_clk>, <&hsio_per_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "hsio_phyx1_pclk",
+				     "hsio_phyx1_epcs_tx_clk",
+				     "hsio_phyx1_epcs_rx_clk",
+				     "hsio_phyx1_apb_clk";
+		power-domains = <&pd IMX_SC_R_SERDES_1>;
+	};
+
+	hsio_phy: phy@5f1a0000 {
+		compatible = "fsl,imx8qxp-hsio";
+		reg = <0x5f1a0000 0x10000>,
+		      <0x5f120000 0x10000>,
+		      <0x5f140000 0x10000>,
+		      <0x5f160000 0x10000>;
+		reg-names = "reg", "phy", "ctrl", "misc";
+		clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>,
+			 <&phyx1_lpcg IMX_LPCG_CLK_1>,
+			 <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>,
+			 <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>,
+			 <&misc_crr5_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "pclk0", "apb_pclk0", "phy0_crr", "ctl0_crr",
+			      "misc_crr";
+		#phy-cells = <3>;
+		power-domains = <&pd IMX_SC_R_SERDES_1>;
+		status = "disabled";
+	};
+
+	pcie0: pcie@5f010000 {
+	};
+
+	pcie0_ep: pcie-ep@5f010000 {
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
index 3a087317591d..232cf25dadfc 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
@@ -4,6 +4,86 @@
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
+&csi1_pxl_lpcg {
+	status = "disabled";
+};
+
+&csi1_core_lpcg {
+	status = "disabled";
+};
+
+&csi1_esc_lpcg {
+	status = "disabled";
+};
+
+&gpio0_mipi_csi1 {
+	status = "disabled";
+};
+
+&i2c_mipi_csi1 {
+	status = "disabled";
+};
+
+&irqsteer_csi1 {
+	status = "disabled";
+};
+
+&isi {
+	compatible = "fsl,imx8qxp-isi";
+	reg = <0x58100000 0x60000>;
+	interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+		 <&pdma1_lpcg IMX_LPCG_CLK_0>,
+		 <&pdma2_lpcg IMX_LPCG_CLK_0>,
+		 <&pdma3_lpcg IMX_LPCG_CLK_0>,
+		 <&pdma4_lpcg IMX_LPCG_CLK_0>,
+		 <&pdma5_lpcg IMX_LPCG_CLK_0>;
+	clock-names = "per0", "per1", "per2", "per3", "per4", "per5";
+	power-domains = <&pd IMX_SC_R_ISI_CH0>,
+			<&pd IMX_SC_R_ISI_CH1>,
+			<&pd IMX_SC_R_ISI_CH2>,
+			<&pd IMX_SC_R_ISI_CH3>,
+			<&pd IMX_SC_R_ISI_CH4>,
+			<&pd IMX_SC_R_ISI_CH5>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@2 {
+			reg = <2>;
+
+			isi_in_2: endpoint {
+				remote-endpoint = <&mipi_csi0_out>;
+			};
+		};
+	};
+};
+
+&mipi_csi_0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+		};
+
+		port@1 {
+			reg = <1>;
+
+			mipi_csi0_out: endpoint {
+				remote-endpoint = <&isi_in_2>;
+			};
+		};
+	};
+};
+
 &jpegdec {
 	compatible = "nxp,imx8qxp-jpgdec";
 };
@@ -11,3 +91,7 @@
 &jpegenc {
 	compatible = "nxp,imx8qxp-jpgenc";
 };
+
+&mipi_csi_1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
index 8e2152c6eb88..8f722b1dd078 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
@@ -6,26 +6,51 @@
 
 &lsio_gpio0 {
 	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 1 56 12>,
+		      <&iomuxc 13 69 4>,
+		      <&iomuxc 19 75 4>,
+		      <&iomuxc 24 80 1>,
+		      <&iomuxc 25 82 7>;
 };
 
 &lsio_gpio1 {
 	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 89 9>,
+		      <&iomuxc 9 99 16>,
+		      <&iomuxc 25 116 7>;
 };
 
 &lsio_gpio2 {
 	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 123 1>,
+		      <&iomuxc 1 126 2>,
+		      <&iomuxc 3 129 1>;
 };
 
 &lsio_gpio3 {
 	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 146 4>,
+		      <&iomuxc 4 151 13>,
+		      <&iomuxc 17 165 8>;
 };
 
 &lsio_gpio4 {
 	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 0 3>,
+		      <&iomuxc 3 4 4>,
+		      <&iomuxc 7 9 6>,
+		      <&iomuxc 13 16 6>,
+		      <&iomuxc 19 23 2>,
+		      <&iomuxc 21 26 2>,
+		      <&iomuxc 23 30 6>,
+		      <&iomuxc 29 37 3>;
 };
 
 &lsio_gpio5 {
 	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 40 3>,
+		      <&iomuxc 3 44 6>,
+		      <&iomuxc 9 51 3>;
 };
 
 &lsio_gpio6 {
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-security.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-security.dtsi
new file mode 100644
index 000000000000..15f1239dab24
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-security.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2025 Actia Nordic AB
+ */
+
+&crypto {
+	compatible = "fsl,imx8qxp-caam", "fsl,sec-v4.0";
+};
+
+&sec_jr2 {
+	compatible = "fsl,imx8qxp-job-ring", "fsl,sec-v4.0-job-ring";
+};
+
+&sec_jr3 {
+	compatible = "fsl,imx8qxp-job-ring", "fsl,sec-v4.0-job-ring";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi
new file mode 100644
index 000000000000..f81937b5fb72
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+&mu_m0 {
+	interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mu1_m0 {
+	interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&vpu_core0 {
+	reg = <0x2d040000 0x10000>;
+};
+
+&vpu_core1 {
+	reg = <0x2d050000 0x10000>;
+};
+
+/delete-node/ &mu2_m0;
+/delete-node/ &vpu_core2;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp-mba8xx.dts b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp-mba8xx.dts
new file mode 100644
index 000000000000..7d2e98bf8bc5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp-mba8xx.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-tqma8xqp.dtsi"
+#include "mba8xx.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8QXP TQMa8XQP on MBa8Xx";
+	compatible = "tq,imx8qxp-tqma8xqp-mba8xx", "tq,imx8qxp-tqma8xqp", "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp.dtsi
new file mode 100644
index 000000000000..b14040bf4ddd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "imx8qxp.dtsi"
+#include "tqma8xx.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8QXP TQMa8XQP";
+	compatible = "tq,imx8qxp-tqma8xqp", "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps-mb-smarc-2.dts b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps-mb-smarc-2.dts
new file mode 100644
index 000000000000..3fa9b5aee2c3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps-mb-smarc-2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-tqma8xqps.dtsi"
+#include "tqma8xxs-mb-smarc-2.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8QXP TQMa8XQPS on MB-SMARC-2";
+	compatible = "tq,imx8qxp-tqma8xqps-mb-smarc-2", "tq,imx8qxp-tqma8xqps", "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps.dtsi
new file mode 100644
index 000000000000..f008b7a34505
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "imx8qxp.dtsi"
+#include "tqma8xxs.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8QXP TQMa8XQPS";
+	compatible = "tq,imx8qxp-tqma8xqps", "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index f4ea18bb95ab..95edab058276 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -46,9 +46,12 @@
 		serial1 = &lpuart1;
 		serial2 = &lpuart2;
 		serial3 = &lpuart3;
-		vpu_core0 = &vpu_core0;
-		vpu_core1 = &vpu_core1;
-		vpu_core2 = &vpu_core2;
+		spi0 = &lpspi0;
+		spi1 = &lpspi1;
+		spi2 = &lpspi2;
+		spi3 = &lpspi3;
+		vpu-core0 = &vpu_core0;
+		vpu-core1 = &vpu_core1;
 	};
 
 	cpus {
@@ -127,6 +130,7 @@
 		A35_L2: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <1024>;
@@ -155,6 +159,7 @@
 		compatible = "arm,gic-v3";
 		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
 		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -183,6 +188,7 @@
 		dsp_reserved: dsp@92400000 {
 			reg = <0 0x92400000 0 0x2000000>;
 			no-map;
+			status = "disabled";
 		};
 
 		encoder_rpc: encoder-rpc@94400000 {
@@ -236,6 +242,11 @@
 			status = "disabled";
 		};
 
+		scu_reset: reset-controller {
+			compatible = "fsl,imx-scu-reset";
+			#reset-cells = <1>;
+		};
+
 		rtc: rtc {
 			compatible = "fsl,imx8qxp-sc-rtc";
 		};
@@ -259,6 +270,13 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
 	};
 
+	clk_dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "clk_dummy";
+	};
+
 	xtal32k: clock-xtal32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -309,13 +327,20 @@
 	/* sorted in register address */
 	#include "imx8-ss-img.dtsi"
 	#include "imx8-ss-vpu.dtsi"
+	#include "imx8-ss-security.dtsi"
+	#include "imx8-ss-cm40.dtsi"
+	#include "imx8-ss-gpu0.dtsi"
 	#include "imx8-ss-adma.dtsi"
 	#include "imx8-ss-conn.dtsi"
 	#include "imx8-ss-ddr.dtsi"
 	#include "imx8-ss-lsio.dtsi"
+	#include "imx8-ss-hsio.dtsi"
 };
 
 #include "imx8qxp-ss-img.dtsi"
+#include "imx8qxp-ss-vpu.dtsi"
+#include "imx8qxp-ss-security.dtsi"
 #include "imx8qxp-ss-adma.dtsi"
 #include "imx8qxp-ss-conn.dtsi"
 #include "imx8qxp-ss-lsio.dtsi"
+#include "imx8qxp-ss-hsio.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-9x9-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-9x9-evk.dts
new file mode 100644
index 000000000000..5497e3d78136
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-9x9-evk.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8ulp-evk.dts"
+
+/ {
+	model = "NXP i.MX8ULP EVK9";
+	compatible = "fsl,imx8ulp-9x9-evk", "fsl,imx8ulp";
+};
+
+&btcpu {
+	sound-dai = <&sai6>;
+};
+
+&iomuxc1 {
+	pinctrl_sai6: sai6grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTE10__I2S6_TX_BCLK  0x43
+			MX8ULP_PAD_PTE11__I2S6_TX_FS    0x43
+			MX8ULP_PAD_PTE14__I2S6_TXD2     0x43
+			MX8ULP_PAD_PTE6__I2S6_RXD0      0x43
+		>;
+	};
+};
+
+&pinctrl_enet {
+	fsl,pins = <
+		MX8ULP_PAD_PTF9__ENET0_MDC		0x43
+		MX8ULP_PAD_PTF8__ENET0_MDIO             0x43
+		MX8ULP_PAD_PTF5__ENET0_RXER             0x43
+		MX8ULP_PAD_PTF6__ENET0_CRS_DV           0x43
+		MX8ULP_PAD_PTF1__ENET0_RXD0             0x43
+		MX8ULP_PAD_PTF0__ENET0_RXD1             0x43
+		MX8ULP_PAD_PTF4__ENET0_TXEN             0x43
+		MX8ULP_PAD_PTF3__ENET0_TXD0             0x43
+		MX8ULP_PAD_PTF2__ENET0_TXD1             0x43
+		MX8ULP_PAD_PTF7__ENET0_REFCLK           0x43
+		MX8ULP_PAD_PTF10__ENET0_1588_CLKIN      0x43
+	>;
+};
+
+&pinctrl_usb1 {
+	fsl,pins = <
+		MX8ULP_PAD_PTE16__USB0_ID		0x10003
+		MX8ULP_PAD_PTE18__USB0_OC		0x10003
+	>;
+};
+
+&pinctrl_usb2 {
+	fsl,pins = <
+		MX8ULP_PAD_PTD23__USB1_ID		0x10003
+		MX8ULP_PAD_PTE20__USB1_OC		0x10003
+	>;
+};
+
+&sai6 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_sai6>;
+	pinctrl-1 = <&pinctrl_sai6>;
+	assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD1_DIV1>, <&cgc2 IMX8ULP_CLK_SAI6_SEL>;
+	assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD1_DIV1>;
+	assigned-clock-rates = <12288000>;
+	fsl,dataline = <1 0x01 0x04>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
index 33e84c4e9ed8..290a49bea2f7 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
@@ -11,6 +11,11 @@
 	model = "NXP i.MX8ULP EVK";
 	compatible = "fsl,imx8ulp-evk", "fsl,imx8ulp";
 
+	bt_sco_codec: bt-sco-codec {
+		#sound-dai-cells = <1>;
+		compatible = "linux,bt-sco";
+	};
+
 	chosen {
 		stdout-path = &lpuart5;
 	};
@@ -19,6 +24,126 @@
 		device_type = "memory";
 		reg = <0x0 0x80000000 0 0x80000000>;
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x28000000>;
+			linux,cma-default;
+		};
+
+		m33_reserved: noncacheable-section@a8600000 {
+			reg = <0 0xa8600000 0 0x1000000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@1fff8000 {
+			reg = <0 0x1fff8000 0 0x1000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@aff00000 {
+			reg = <0 0xaff00000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@aff08000 {
+			reg = <0 0xaff08000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@aff10000 {
+			reg = <0 0xaff10000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@aff18000 {
+			reg = <0 0xaff18000 0 0x8000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@a8400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa8400000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	clock_ext_rmii: clock-ext-rmii {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		clock-output-names = "ext_rmii_clk";
+		#clock-cells = <0>;
+	};
+
+	clock_ext_ts: clock-ext-ts {
+		compatible = "fixed-clock";
+		/* External ts clock is 50MHZ from PHY on EVK board. */
+		clock-frequency = <50000000>;
+		clock-output-names = "ext_ts_clk";
+		#clock-cells = <0>;
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai5>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>;
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&cm33 {
+	mbox-names = "tx", "rx", "rxdb";
+	mboxes = <&mu 0 1>,
+		 <&mu 1 1>,
+		 <&mu 3 1>;
+	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+			<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	status = "okay";
+};
+
+&flexspi2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_flexspi2_ptd>;
+	pinctrl-1 = <&pinctrl_flexspi2_ptd>;
+	status = "okay";
+
+	mx25uw51345gxdi00: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <200000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
 };
 
 &lpuart5 {
@@ -29,16 +154,175 @@
 	status = "okay";
 };
 
-&usdhc0 {
+&lpi2c7 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
 	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c7>;
+	pinctrl-1 = <&pinctrl_lpi2c7>;
+	status = "okay";
+
+	ptn5150_1: typec@1d {
+		compatible = "nxp,ptn5150";
+		reg = <0x1d>;
+		int-gpios = <&gpiof 3 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec1>;
+		status = "disabled";
+	};
+
+	pcal6408: gpio@21 {
+		compatible = "nxp,pcal9554b";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	ptn5150_2: typec@3d {
+		compatible = "nxp,ptn5150";
+		reg = <0x3d>;
+		int-gpios = <&gpiof 5 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec2>;
+		status = "disabled";
+	};
+};
+
+&sai5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_sai5>;
+	pinctrl-1 = <&pinctrl_sai5>;
+	assigned-clocks = <&cgc1 IMX8ULP_CLK_SAI5_SEL>;
+	assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SPLL3_PFD1_DIV1>;
+	fsl,dataline = <1 0x08 0x01>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_spdif>;
+	pinctrl-1 = <&pinctrl_spdif>;
+	assigned-clocks = <&cgc2 IMX8ULP_CLK_SPDIF_SEL>;
+	assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SPLL3_PFD1_DIV1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <110>;
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb2>;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <110>;
+	status = "okay";
+};
+
+&usbmisc2 {
+	status = "okay";
+};
+
+&usdhc0 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
 	pinctrl-0 = <&pinctrl_usdhc0>;
 	pinctrl-1 = <&pinctrl_usdhc0>;
+	pinctrl-2 = <&pinctrl_usdhc0>;
+	pinctrl-3 = <&pinctrl_usdhc0>;
 	non-removable;
 	bus-width = <8>;
 	status = "okay";
 };
 
+&fec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_enet>;
+	pinctrl-1 = <&pinctrl_enet>;
+	clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+		 <&pcc4 IMX8ULP_CLK_ENET>,
+		 <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>,
+		 <&clock_ext_rmii>;
+	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+	assigned-clocks = <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>;
+	assigned-clock-parents = <&clock_ext_ts>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <1>;
+		};
+	};
+};
+
+&mu {
+	status = "okay";
+};
+
 &iomuxc1 {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX8ULP_PAD_PTE15__ENET0_MDC     0x43
+			MX8ULP_PAD_PTE14__ENET0_MDIO    0x43
+			MX8ULP_PAD_PTE17__ENET0_RXER    0x43
+			MX8ULP_PAD_PTE18__ENET0_CRS_DV  0x43
+			MX8ULP_PAD_PTF1__ENET0_RXD0     0x43
+			MX8ULP_PAD_PTE20__ENET0_RXD1    0x43
+			MX8ULP_PAD_PTE16__ENET0_TXEN    0x43
+			MX8ULP_PAD_PTE23__ENET0_TXD0    0x43
+			MX8ULP_PAD_PTE22__ENET0_TXD1    0x43
+			MX8ULP_PAD_PTE19__ENET0_REFCLK  0x43
+			MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43
+		>;
+	};
+
+	pinctrl_flexspi2_ptd: flexspi2ptdgrp {
+		fsl,pins = <
+
+			MX8ULP_PAD_PTD12__FLEXSPI2_A_SS0_B	0x42
+			MX8ULP_PAD_PTD13__FLEXSPI2_A_SCLK	0x42
+			MX8ULP_PAD_PTD14__FLEXSPI2_A_DATA3	0x42
+			MX8ULP_PAD_PTD15__FLEXSPI2_A_DATA2	0x42
+			MX8ULP_PAD_PTD16__FLEXSPI2_A_DATA1	0x42
+			MX8ULP_PAD_PTD17__FLEXSPI2_A_DATA0	0x42
+			MX8ULP_PAD_PTD18__FLEXSPI2_A_DQS	0x42
+			MX8ULP_PAD_PTD19__FLEXSPI2_A_DATA7	0x42
+			MX8ULP_PAD_PTD20__FLEXSPI2_A_DATA6	0x42
+			MX8ULP_PAD_PTD21__FLEXSPI2_A_DATA5	0x42
+			MX8ULP_PAD_PTD22__FLEXSPI2_A_DATA4	0x42
+		>;
+	};
+
 	pinctrl_lpuart5: lpuart5grp {
 		fsl,pins = <
 			MX8ULP_PAD_PTF14__LPUART5_TX	0x3
@@ -46,19 +330,67 @@
 		>;
 	};
 
+	pinctrl_lpi2c7: lpi2c7grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTE12__LPI2C7_SCL	0x20
+			MX8ULP_PAD_PTE13__LPI2C7_SDA	0x20
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF26__I2S5_TX_BCLK	0x43
+			MX8ULP_PAD_PTF27__I2S5_TX_FS	0x43
+			MX8ULP_PAD_PTF28__I2S5_TXD0	0x43
+			MX8ULP_PAD_PTF24__I2S5_RXD3	0x43
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF25__SPDIF_OUT1    0x43
+		>;
+	};
+
+	pinctrl_typec1: typec1grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF3__PTF3           0x3
+		>;
+	};
+
+	pinctrl_typec2: typec2grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF5__PTF5           0x3
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF2__USB0_ID	0x10003
+			MX8ULP_PAD_PTF4__USB0_OC	0x10003
+		>;
+	};
+
+	pinctrl_usb2: usb2grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTD23__USB1_ID	0x10003
+			MX8ULP_PAD_PTF6__USB1_OC	0x10003
+		>;
+	};
+
 	pinctrl_usdhc0: usdhc0grp {
 		fsl,pins = <
-			MX8ULP_PAD_PTD1__SDHC0_CMD	0x43
-			MX8ULP_PAD_PTD2__SDHC0_CLK	0x10042
-			MX8ULP_PAD_PTD10__SDHC0_D0	0x43
-			MX8ULP_PAD_PTD9__SDHC0_D1	0x43
-			MX8ULP_PAD_PTD8__SDHC0_D2	0x43
-			MX8ULP_PAD_PTD7__SDHC0_D3	0x43
-			MX8ULP_PAD_PTD6__SDHC0_D4	0x43
-			MX8ULP_PAD_PTD5__SDHC0_D5	0x43
-			MX8ULP_PAD_PTD4__SDHC0_D6	0x43
-			MX8ULP_PAD_PTD3__SDHC0_D7	0x43
-			MX8ULP_PAD_PTD11__SDHC0_DQS	0x10042
+			MX8ULP_PAD_PTD1__SDHC0_CMD	0x3
+			MX8ULP_PAD_PTD2__SDHC0_CLK	0x10002
+			MX8ULP_PAD_PTD10__SDHC0_D0	0x3
+			MX8ULP_PAD_PTD9__SDHC0_D1	0x3
+			MX8ULP_PAD_PTD8__SDHC0_D2	0x3
+			MX8ULP_PAD_PTD7__SDHC0_D3	0x3
+			MX8ULP_PAD_PTD6__SDHC0_D4	0x3
+			MX8ULP_PAD_PTD5__SDHC0_D5	0x3
+			MX8ULP_PAD_PTD4__SDHC0_D6	0x3
+			MX8ULP_PAD_PTD3__SDHC0_D7	0x3
+			MX8ULP_PAD_PTD11__SDHC0_DQS	0x10002
 		>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h
index b204ac79b449..b204ac79b449 100755..100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index 60c1b018bf03..13b01f3aa2a4 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/imx8ulp-power.h>
+#include <dt-bindings/thermal/thermal.h>
 
 #include "imx8ulp-pinfunc.h"
 
@@ -16,6 +17,7 @@
 	#size-cells = <2>;
 
 	aliases {
+		ethernet0 = &fec;
 		gpio0 = &gpiod;
 		gpio1 = &gpioe;
 		gpio2 = &gpiof;
@@ -26,6 +28,8 @@
 		serial1 = &lpuart5;
 		serial2 = &lpuart6;
 		serial3 = &lpuart7;
+		spi0 = &lpspi4;
+		spi1 = &lpspi5;
 	};
 
 	cpus {
@@ -38,6 +42,7 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&A35_L2>;
+			cpu-idle-states = <&cpu_sleep>;
 		};
 
 		A35_1: cpu@1 {
@@ -46,10 +51,26 @@
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			next-level-cache = <&A35_L2>;
+			cpu-idle-states = <&cpu_sleep>;
 		};
 
 		A35_L2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_sleep: cpu-sleep {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0>;
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+			};
 		};
 	};
 
@@ -62,11 +83,41 @@
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7
+			     (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-affinity = <&A35_0>, <&A35_1>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&scmi_sensor 0>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
@@ -111,7 +162,7 @@
 		#size-cells = <1>;
 		ranges = <0 0x0 0x2201f000 0x1000>;
 
-		scmi_buf: scmi-buf@0 {
+		scmi_buf: scmi-sram-section@0 {
 			compatible = "arm,scmi-shmem";
 			reg = <0x0 0x400>;
 		};
@@ -137,11 +188,24 @@
 		};
 	};
 
+	cm33: remoteproc-cm33 {
+		compatible = "fsl,imx8ulp-cm33";
+		status = "disabled";
+	};
+
 	soc: soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x0 0x0 0x0 0x40000000>;
+		ranges = <0x0 0x0 0x0 0x40000000>,
+			 <0x60000000 0x0 0x60000000 0x1000000>;
+
+		s4muap: mailbox@27020000 {
+			compatible = "fsl,imx8ulp-mu-s4";
+			reg = <0x27020000 0x10000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
 
 		per_bridge3: bus@29000000 {
 			compatible = "simple-bus";
@@ -150,6 +214,87 @@
 			#size-cells = <1>;
 			ranges;
 
+			edma1: dma-controller@29010000 {
+				compatible = "fsl,imx8ulp-edma";
+				reg = <0x29010000 0x210000>;
+				#dma-cells = <3>;
+				dma-channels = <32>;
+				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_DMA1_MP>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH0>, <&pcc3 IMX8ULP_CLK_DMA1_CH1>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH2>, <&pcc3 IMX8ULP_CLK_DMA1_CH3>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH4>, <&pcc3 IMX8ULP_CLK_DMA1_CH5>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH6>, <&pcc3 IMX8ULP_CLK_DMA1_CH7>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH8>, <&pcc3 IMX8ULP_CLK_DMA1_CH9>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH10>, <&pcc3 IMX8ULP_CLK_DMA1_CH11>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH12>, <&pcc3 IMX8ULP_CLK_DMA1_CH13>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH14>, <&pcc3 IMX8ULP_CLK_DMA1_CH15>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH16>, <&pcc3 IMX8ULP_CLK_DMA1_CH17>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH18>, <&pcc3 IMX8ULP_CLK_DMA1_CH19>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH20>, <&pcc3 IMX8ULP_CLK_DMA1_CH21>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH22>, <&pcc3 IMX8ULP_CLK_DMA1_CH23>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH24>, <&pcc3 IMX8ULP_CLK_DMA1_CH25>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH26>, <&pcc3 IMX8ULP_CLK_DMA1_CH27>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH28>, <&pcc3 IMX8ULP_CLK_DMA1_CH29>,
+					<&pcc3 IMX8ULP_CLK_DMA1_CH30>, <&pcc3 IMX8ULP_CLK_DMA1_CH31>;
+				clock-names = "dma", "ch00","ch01", "ch02", "ch03",
+						"ch04", "ch05", "ch06", "ch07",
+						"ch08", "ch09", "ch10", "ch11",
+						"ch12", "ch13", "ch14", "ch15",
+						"ch16", "ch17", "ch18", "ch19",
+						"ch20", "ch21", "ch22", "ch23",
+						"ch24", "ch25", "ch26", "ch27",
+						"ch28", "ch29", "ch30", "ch31";
+			};
+
+			mu: mailbox@29220000 {
+				compatible = "fsl,imx8ulp-mu";
+				reg = <0x29220000 0x10000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu3: mailbox@29230000 {
+				compatible = "fsl,imx8ulp-mu";
+				reg = <0x29230000 0x10000>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_MU3_A>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
 			wdog3: watchdog@292a0000 {
 				compatible = "fsl,imx8ulp-wdt", "fsl,imx7ulp-wdt";
 				reg = <0x292a0000 0x10000>;
@@ -163,8 +308,6 @@
 			cgc1: clock-controller@292c0000 {
 				compatible = "fsl,imx8ulp-cgc1";
 				reg = <0x292c0000 0x10000>;
-				clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>;
-				clock-names = "rosc", "sosc", "frosc", "lposc";
 				#clock-cells = <1>;
 			};
 
@@ -172,6 +315,39 @@
 				compatible = "fsl,imx8ulp-pcc3";
 				reg = <0x292d0000 0x10000>;
 				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			crypto: crypto@292e0000 {
+				compatible = "fsl,sec-v4.0";
+				reg = <0x292e0000 0x10000>;
+				ranges = <0 0x292e0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr3: jr@4000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x4000 0x1000>;
+					interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				};
 			};
 
 			tpm5: tpm@29340000 {
@@ -192,7 +368,7 @@
 					 <&pcc3 IMX8ULP_CLK_LPI2C4>;
 				clock-names = "per", "ipg";
 				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>;
-				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
 				assigned-clock-rates = <48000000>;
 				status = "disabled";
 			};
@@ -205,7 +381,7 @@
 					 <&pcc3 IMX8ULP_CLK_LPI2C5>;
 				clock-names = "per", "ipg";
 				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>;
-				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
 				assigned-clock-rates = <48000000>;
 				status = "disabled";
 			};
@@ -238,8 +414,8 @@
 					 <&pcc3 IMX8ULP_CLK_LPSPI4>;
 				clock-names = "per", "ipg";
 				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>;
-				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
-				assigned-clock-rates = <16000000>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+				assigned-clock-rates = <48000000>;
 				status = "disabled";
 			};
 
@@ -253,8 +429,8 @@
 					 <&pcc3 IMX8ULP_CLK_LPSPI5>;
 				clock-names = "per", "ipg";
 				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>;
-				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
-				assigned-clock-rates = <16000000>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+				assigned-clock-rates = <48000000>;
 				status = "disabled";
 			};
 		};
@@ -270,6 +446,22 @@
 				compatible = "fsl,imx8ulp-pcc4";
 				reg = <0x29800000 0x10000>;
 				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			flexspi2: spi@29810000 {
+				compatible = "nxp,imx8ulp-fspi";
+				reg = <0x29810000 0x10000>, <0x60000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_FLEXSPI2>,
+					 <&pcc4 IMX8ULP_CLK_FLEXSPI2>;
+				clock-names = "fspi_en", "fspi";
+				assigned-clocks = <&pcc4 IMX8ULP_CLK_FLEXSPI2>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>;
+				status = "disabled";
 			};
 
 			lpi2c6: i2c@29840000 {
@@ -280,7 +472,7 @@
 					 <&pcc4 IMX8ULP_CLK_LPI2C6>;
 				clock-names = "per", "ipg";
 				assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>;
-				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
 				assigned-clock-rates = <48000000>;
 				status = "disabled";
 			};
@@ -293,7 +485,7 @@
 					 <&pcc4 IMX8ULP_CLK_LPI2C7>;
 				clock-names = "per", "ipg";
 				assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>;
-				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
 				assigned-clock-rates = <48000000>;
 				status = "disabled";
 			};
@@ -316,6 +508,36 @@
 				status = "disabled";
 			};
 
+			sai4: sai@29880000 {
+				compatible = "fsl,imx8ulp-sai";
+				reg = <0x29880000 0x10000>;
+				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_SAI4>, <&cgc1 IMX8ULP_CLK_DUMMY>,
+					 <&cgc1 IMX8ULP_CLK_SAI4_SEL>, <&cgc1 IMX8ULP_CLK_DUMMY>,
+					 <&cgc1 IMX8ULP_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 67 0 1>, <&edma1 68 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				fsl,dataline = <0 0x03 0x03>;
+				status = "disabled";
+			};
+
+			sai5: sai@29890000 {
+				compatible = "fsl,imx8ulp-sai";
+				reg = <0x29890000 0x10000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_SAI5>, <&cgc1 IMX8ULP_CLK_DUMMY>,
+					 <&cgc1 IMX8ULP_CLK_SAI5_SEL>, <&cgc1 IMX8ULP_CLK_DUMMY>,
+					 <&cgc1 IMX8ULP_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 69 0 1>, <&edma1 70 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				fsl,dataline = <0 0x0f 0x0f>;
+				status = "disabled";
+			};
+
 			iomuxc1: pinctrl@298c0000 {
 				compatible = "fsl,imx8ulp-iomuxc1";
 				reg = <0x298c0000 0x10000>;
@@ -330,6 +552,10 @@
 					 <&pcc4 IMX8ULP_CLK_USDHC0>;
 				clock-names = "ipg", "ahb", "per";
 				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC0>;
+				assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV1>,
+						  <&pcc4 IMX8ULP_CLK_USDHC0>;
+				assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV1>;
+				assigned-clock-rates = <389283840>, <389283840>;
 				fsl,tuning-start-tap = <20>;
 				fsl,tuning-step = <2>;
 				bus-width = <4>;
@@ -345,6 +571,10 @@
 					 <&pcc4 IMX8ULP_CLK_USDHC1>;
 				clock-names = "ipg", "ahb", "per";
 				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC1>;
+				assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>,
+						  <&pcc4 IMX8ULP_CLK_USDHC1>;
+				assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>;
+				assigned-clock-rates = <194641920>, <194641920>;
 				fsl,tuning-start-tap = <20>;
 				fsl,tuning-step = <2>;
 				bus-width = <4>;
@@ -360,39 +590,119 @@
 					 <&pcc4 IMX8ULP_CLK_USDHC2>;
 				clock-names = "ipg", "ahb", "per";
 				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>;
+				assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>,
+						  <&pcc4 IMX8ULP_CLK_USDHC2>;
+				assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>;
+				assigned-clock-rates = <194641920>, <194641920>;
 				fsl,tuning-start-tap = <20>;
 				fsl,tuning-step = <2>;
 				bus-width = <4>;
 				status = "disabled";
 			};
+
+			usbotg1: usb@29900000 {
+				compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+				reg = <0x29900000 0x200>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_USB0>;
+				power-domains = <&scmi_devpd IMX8ULP_PD_USB0>;
+				phys = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x8>;
+				rx-burst-size-dword = <0x8>;
+				status = "disabled";
+			};
+
+			usbmisc1: usbmisc@29900200 {
+				compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7d-usbmisc",
+					     "fsl,imx6q-usbmisc";
+				reg = <0x29900200 0x200>;
+				#index-cells = <1>;
+				status = "disabled";
+			};
+
+			usbphy1: usb-phy@29910000 {
+				compatible = "fsl,imx8ulp-usbphy", "fsl,imx7ulp-usbphy";
+				reg = <0x29910000 0x10000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_USB0_PHY>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@29920000 {
+				compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+				reg = <0x29920000 0x200>;
+				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_USB1>;
+				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>;
+				phys = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc2 0>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x8>;
+				rx-burst-size-dword = <0x8>;
+				status = "disabled";
+			};
+
+			usbmisc2: usbmisc@29920200 {
+				compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7d-usbmisc",
+					     "fsl,imx6q-usbmisc";
+				reg = <0x29920200 0x200>;
+				#index-cells = <1>;
+				status = "disabled";
+			};
+
+			usbphy2: usb-phy@29930000 {
+				compatible = "fsl,imx8ulp-usbphy", "fsl,imx7ulp-usbphy";
+				reg = <0x29930000 0x10000>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_USB1_PHY>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			fec: ethernet@29950000 {
+				compatible = "fsl,imx8ulp-fec", "fsl,imx6ul-fec", "fsl,imx6q-fec";
+				reg = <0x29950000 0x10000>;
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "int0";
+				fsl,num-tx-queues = <1>;
+				fsl,num-rx-queues = <1>;
+				status = "disabled";
+			};
 		};
 
-		gpioe: gpio@2d000080 {
-				compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
-				reg = <0x2d000080 0x1000>, <0x2d000040 0x40>;
+		gpioe: gpio@2d000000 {
+				compatible = "fsl,imx8ulp-gpio";
+				reg = <0x2d000000 0x1000>;
 				gpio-controller;
 				#gpio-cells = <2>;
-				interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>,
 					 <&pcc4 IMX8ULP_CLK_PCTLE>;
 				clock-names = "gpio", "port";
 				gpio-ranges = <&iomuxc1 0 32 24>;
+				ngpios = <24>;
 		};
 
-		gpiof: gpio@2d010080 {
-				compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
-				reg = <0x2d010080 0x1000>, <0x2d010040 0x40>;
+		gpiof: gpio@2d010000 {
+				compatible = "fsl,imx8ulp-gpio";
+				reg = <0x2d010000 0x1000>;
 				gpio-controller;
 				#gpio-cells = <2>;
-				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>,
 					 <&pcc4 IMX8ULP_CLK_PCTLF>;
 				clock-names = "gpio", "port";
 				gpio-ranges = <&iomuxc1 0 64 32>;
+				ngpios = <32>;
 		};
 
 		per_bridge5: bus@2d800000 {
@@ -402,11 +712,73 @@
 			#size-cells = <1>;
 			ranges;
 
+			edma2: dma-controller@2d800000 {
+				compatible = "fsl,imx8ulp-edma";
+				reg = <0x2d800000 0x210000>;
+				#dma-cells = <3>;
+				dma-channels = <32>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc5 IMX8ULP_CLK_DMA2_MP>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH0>, <&pcc5 IMX8ULP_CLK_DMA2_CH1>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH2>, <&pcc5 IMX8ULP_CLK_DMA2_CH3>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH4>, <&pcc5 IMX8ULP_CLK_DMA2_CH5>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH6>, <&pcc5 IMX8ULP_CLK_DMA2_CH7>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH8>, <&pcc5 IMX8ULP_CLK_DMA2_CH9>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH10>, <&pcc5 IMX8ULP_CLK_DMA2_CH11>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH12>, <&pcc5 IMX8ULP_CLK_DMA2_CH13>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH14>, <&pcc5 IMX8ULP_CLK_DMA2_CH15>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH16>, <&pcc5 IMX8ULP_CLK_DMA2_CH17>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH18>, <&pcc5 IMX8ULP_CLK_DMA2_CH19>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH20>, <&pcc5 IMX8ULP_CLK_DMA2_CH21>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH22>, <&pcc5 IMX8ULP_CLK_DMA2_CH23>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH24>, <&pcc5 IMX8ULP_CLK_DMA2_CH25>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH26>, <&pcc5 IMX8ULP_CLK_DMA2_CH27>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH28>, <&pcc5 IMX8ULP_CLK_DMA2_CH29>,
+					<&pcc5 IMX8ULP_CLK_DMA2_CH30>, <&pcc5 IMX8ULP_CLK_DMA2_CH31>;
+				clock-names = "dma", "ch00","ch01", "ch02", "ch03",
+						"ch04", "ch05", "ch06", "ch07",
+						"ch08", "ch09", "ch10", "ch11",
+						"ch12", "ch13", "ch14", "ch15",
+						"ch16", "ch17", "ch18", "ch19",
+						"ch20", "ch21", "ch22", "ch23",
+						"ch24", "ch25", "ch26", "ch27",
+						"ch28", "ch29", "ch30", "ch31";
+			};
+
 			cgc2: clock-controller@2da60000 {
 				compatible = "fsl,imx8ulp-cgc2";
 				reg = <0x2da60000 0x10000>;
-				clocks = <&sosc>, <&frosc>;
-				clock-names = "sosc", "frosc";
 				#clock-cells = <1>;
 			};
 
@@ -414,21 +786,78 @@
 				compatible = "fsl,imx8ulp-pcc5";
 				reg = <0x2da70000 0x10000>;
 				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			sai6: sai@2da90000 {
+				compatible = "fsl,imx8ulp-sai";
+				reg = <0x2da90000 0x10000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc5 IMX8ULP_CLK_SAI6>, <&cgc1 IMX8ULP_CLK_DUMMY>,
+					 <&cgc2 IMX8ULP_CLK_SAI6_SEL>, <&cgc1 IMX8ULP_CLK_DUMMY>,
+					 <&cgc1 IMX8ULP_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 71 0 1>, <&edma2 72 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				fsl,dataline = <0 0x0f 0x0f>;
+				status = "disabled";
+			};
+
+			sai7: sai@2daa0000 {
+				compatible = "fsl,imx8ulp-sai";
+				reg = <0x2daa0000 0x10000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc5 IMX8ULP_CLK_SAI7>, <&cgc1 IMX8ULP_CLK_DUMMY>,
+					 <&cgc2 IMX8ULP_CLK_SAI7_SEL>, <&cgc1 IMX8ULP_CLK_DUMMY>,
+					 <&cgc1 IMX8ULP_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 73 0 1>, <&edma2 74 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				fsl,dataline = <0 0x0f 0x0f>;
+				status = "disabled";
+			};
+
+			spdif: spdif@2dab0000 {
+				compatible = "fsl,imx8ulp-spdif";
+				reg = <0x2dab0000 0x10000>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc5 IMX8ULP_CLK_SPDIF>, /* core */
+					 <&sosc>, /* 0, extal */
+					 <&cgc2 IMX8ULP_CLK_SPDIF_SEL>, /* 1, tx */
+					 <&cgc1 IMX8ULP_CLK_DUMMY>, /* 2, tx1 */
+					 <&cgc1 IMX8ULP_CLK_DUMMY>, /* 3, tx2 */
+					 <&cgc1 IMX8ULP_CLK_DUMMY>, /* 4, tx3 */
+					 <&pcc5 IMX8ULP_CLK_SPDIF>, /* 5, sys */
+					 <&cgc1 IMX8ULP_CLK_DUMMY>, /* 6, tx4 */
+					 <&cgc1 IMX8ULP_CLK_DUMMY>, /* 7, tx5 */
+					 <&cgc1 IMX8ULP_CLK_DUMMY>; /* spba */
+				clock-names = "core", "rxtx0",
+					      "rxtx1", "rxtx2",
+					      "rxtx3", "rxtx4",
+					      "rxtx5", "rxtx6",
+					      "rxtx7", "spba";
+				dmas = <&edma2 75 0 5>, <&edma2 76 0 4>;
+				dma-names = "rx", "tx";
+				status = "disabled";
 			};
 		};
 
-		gpiod: gpio@2e200080 {
-			compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
-			reg = <0x2e200080 0x1000>, <0x2e200040 0x40>;
+		gpiod: gpio@2e200000 {
+			compatible = "fsl,imx8ulp-gpio";
+			reg = <0x2e200000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			clocks = <&pcc5 IMX8ULP_CLK_RGPIOD>,
 				 <&pcc5 IMX8ULP_CLK_RGPIOD>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc1 0 0 24>;
+			ngpios = <24>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi
new file mode 100644
index 000000000000..f7bbb2153ae0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/* Colibri Analogue Inputs */
+&adc0 {
+	status = "okay";
+};
+
+/* Colibri PWM_A */
+&adma_pwm {
+	status = "okay";
+};
+
+&colibri_gpio_keys {
+	status = "okay";
+};
+
+&extcon_usbc_det {
+	status = "okay";
+};
+
+/* Colibri Ethernet */
+&fec1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog0>;
+};
+
+/* Colibri SPI */
+&lpspi2 {
+	cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>,
+		   <&lsio_gpio5 2 GPIO_ACTIVE_LOW>;
+};
+
+/* Colibri UART_B */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&lpuart3 {
+	status = "okay";
+};
+
+/* USB PHY for usbotg3 */
+&usb3_phy {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	status = "okay";
+};
+
+/* USB PHY for usbotg1 */
+&usbphy1 {
+	status = "okay";
+};
+
+/* Colibri SDCard */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
new file mode 100644
index 000000000000..f75499765d85
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Toradex
+ */
+
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	/* fixed crystal dedicated to mcp25xx */
+	clk16m: clock-16mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+};
+
+/* Colibri Analogue Inputs */
+&adc0 {
+	status = "okay";
+};
+
+/* Colibri PWM_A */
+&adma_pwm {
+	status = "okay";
+};
+
+&colibri_gpio_keys {
+	status = "okay";
+};
+
+&extcon_usbc_det {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>,
+		    <&pinctrl_lpspi2_cs2>;
+};
+
+/* Colibri SPI */
+&lpspi2 {
+	status = "okay";
+
+	mcp2515: can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		interrupt-parent = <&lsio_gpio3>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_can_int>;
+		pinctrl-names = "default";
+		clocks = <&clk16m>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+/* Colibri UART_B */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Colibri PWM_B */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Colibri PWM_C */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM_D */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&lpuart3 {
+	status = "okay";
+};
+
+/* Colibri FastEthernet */
+&fec1 {
+	status = "okay";
+};
+
+/* USB PHY for usbotg3 */
+&usb3_phy {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	status = "okay";
+};
+
+/* USB PHY for usbotg1 */
+&usbphy1 {
+	status = "okay";
+};
+
+/* Colibri SD/MMC Card */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi
new file mode 100644
index 000000000000..58ec0b399c4f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+#include "imx8x-colibri-iris.dtsi"
+
+/ {
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+		enable-active-high;
+		gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3_vmmc";
+		startup-delay-us = <100>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds_converter &pinctrl_gpio_iris>;
+
+	pinctrl_enable_3v3_vmmc: enable-3v3-vmmc-grp {
+		fsl,pins = <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31	0x20>;	/* SODIMM 100 */
+	};
+
+	pinctrl_lvds_converter: lvds-converter-grp {
+		fsl,pins = <IMX8QXP_FLEXCAN1_TX_LSIO_GPIO1_IO18		0x20>,	/* SODIMM  55 */
+			   /* 6B/8B mode. Select LOW - 8B mode (24bit) */
+			   <IMX8QXP_FLEXCAN1_RX_LSIO_GPIO1_IO17		0x20>,	/* SODIMM  63 */
+			   <IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17		0x20>,	/* SODIMM  95 */
+			   <IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18	0x20>;	/* SODIMM  99 */
+	};
+};
+
+/* Colibri SD/MMC Card */
+&usdhc2 {
+	cap-power-off-card;
+	/delete-property/ no-1-8-v;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi
new file mode 100644
index 000000000000..54393a0c5cbf
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V";
+	};
+};
+
+/* Colibri Analogue Inputs */
+&adc0 {
+	status = "okay";
+};
+
+/* Colibri PWM_A */
+&adma_pwm {
+	status = "okay";
+};
+
+&colibri_gpio_keys {
+	status = "okay";
+};
+
+&extcon_usbc_det {
+	status = "okay";
+};
+
+/* Colibri FastEthernet */
+&fec1 {
+	status = "okay";
+};
+
+/* Colibri I2C */
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_iris>;
+
+	pinctrl_gpio_iris: gpioirisgrp {
+		fsl,pins = <IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21	0x20>,		/* SODIMM  98 */
+			   <IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04		0x20>,		/* SODIMM 133 */
+			   <IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25		0x20>,		/* SODIMM 103 */
+			   <IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28		0x20>,		/* SODIMM 101 */
+			   <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27		0x20>,		/* SODIMM  97 */
+			   <IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03	0x06000020>,	/* SODIMM  85 */
+			   <IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26		0x20>;		/* SODIMM  79 */
+	};
+
+	pinctrl_uart1_forceoff: uart1forceoffgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14	0x20>;	/* SODIMM 22 */
+	};
+
+	pinctrl_uart23_forceoff: uart23forceoffgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00	0x20>; /* SODIMM 23 */
+	};
+};
+
+/* Colibri SPI */
+&lpspi2 {
+	status = "okay";
+};
+
+/* Colibri UART_B */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&lpuart3 {
+	status = "okay";
+};
+
+&lsio_gpio3 {
+	/*
+	 * This turns the LVDS transceiver on. If one wants to turn the
+	 * transceiver off, that property has to be deleted and the gpio handled
+	 * in userspace.
+	 */
+	lvds-tx-on-hog {
+		gpio-hog;
+		gpios = <18 0>;
+		output-high;
+	};
+};
+
+/* Colibri PWM_B */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Colibri PWM_C */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM_D */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* USB PHY for usbotg3 */
+&usb3_phy {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	status = "okay";
+};
+
+/* USB PHY for usbotg1 */
+&usbphy1 {
+	status = "okay";
+};
+
+/* Colibri SD/MMC Card */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
new file mode 100644
index 000000000000..8e9e841cc828
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
@@ -0,0 +1,999 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Toradex
+ */
+
+/ {
+	chosen {
+		stdout-path = &lpuart3;
+	};
+
+	colibri_gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+		status = "disabled";
+
+		key-wakeup {
+			debounce-interval = <10>;
+			gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>;
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	extcon_usbc_det: usbc-det {
+		compatible = "linux,extcon-usb-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbc_det>;
+		id-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_AVDD_AUDIO";
+	};
+
+	reg_module_vref_1v8: regulator-module-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vref-1v8";
+	};
+
+	reg_module_wifi: regulator-module-wifi {
+		compatible = "regulator-fixed";
+		gpio = <&gpio_expander_43 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-name = "Wi-Fi_PDn";
+		startup-delay-us = <2000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_reg>;
+		gpio = <&lsio_gpio4 3 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usbh_vbus";
+	};
+
+	sound-card {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,name = "colibri-imx8x";
+
+		dailink_master: simple-audio-card,codec {
+			clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+			sound-dai = <&sgtl5000_a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai0>;
+		};
+	};
+};
+
+/* Colibri Analogue Inputs */
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0>;
+	vref-supply = <&reg_module_vref_1v8>;
+};
+
+/* Colibri PWM_A */
+&adma_pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_a>;
+};
+
+&cpu_alert0 {
+	hysteresis = <2000>;
+	temperature = <90000>;
+	type = "passive";
+};
+
+&cpu_crit0 {
+	hysteresis = <2000>;
+	temperature = <105000>;
+	type = "critical";
+};
+
+&enet0_lpcg {
+	clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
+		 <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
+		 <&conn_axi_clk>,
+		 <&clk IMX_SC_R_ENET_0 IMX_SC_C_DISABLE_50>,
+		 <&conn_ipg_clk>,
+		 <&conn_ipg_clk>;
+	clock-output-names = "enet0_lpcg_timer_clk",
+			     "enet0_lpcg_txc_sampling_clk",
+			     "enet0_lpcg_ahb_clk",
+			     "enet0_lpcg_ref_50mhz_clk",
+			     "enet0_lpcg_ipg_clk",
+			     "enet0_lpcg_ipg_s_clk";
+};
+
+/* On-module I2C */
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>, <&pinctrl_sgtl5000_usb_clk>;
+	status = "okay";
+
+	/* USB HUB USB3803 */
+	usb-hub@8 {
+		compatible = "smsc,usb3803";
+		reg = <0x8>;
+		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+				  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <786432000>, <49152000>, <12000000>, <12000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb3503a>;
+		bypass-gpios = <&gpio_expander_43 5 GPIO_ACTIVE_LOW>;
+		clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "refclk";
+		disabled-ports = <2>;
+		initial-mode = <1>;
+		intn-gpios = <&lsio_gpio3 4 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio_expander_43 4 GPIO_ACTIVE_LOW>;
+	};
+
+	sgtl5000_a: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		#sound-dai-cells = <0>;
+		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+				  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <786432000>, <49152000>, <12000000>, <12000000>;
+		clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		VDDA-supply = <&reg_module_3v3_avdd>;
+		VDDD-supply = <&reg_module_vref_1v8>;
+		VDDIO-supply = <&reg_module_3v3>;
+	};
+
+	/* Touch controller */
+	ad7879_ts: touchscreen@2c {
+		compatible = "adi,ad7879-1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ad7879_int>;
+		reg = <0x2c>;
+		interrupt-parent = <&lsio_gpio3>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+		status = "disabled";
+	};
+
+	gpio_expander_43: gpio@43 {
+		compatible = "fcs,fxl6408";
+		reg = <0x43>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "Wi-Fi_W_DISABLE",
+				  "Wi-Fi_WKUP_WLAN",
+				  "PWR_EN_+V3.3_WiFi_N",
+				  "PCIe_REF_CLK_EN",
+				  "USB_RESET_N",
+				  "USB_BYPASS_N",
+				  "Wi-Fi_PDn",
+				  "Wi-Fi_WKUP_BT";
+	};
+};
+
+/* TODO i2c lvds0 accessible on FFC (X2) */
+
+/* TODO i2c lvds1 accessible on FFC (X3) */
+
+/* Colibri I2C */
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+};
+
+&jpegdec {
+	status = "okay";
+};
+
+&jpegenc {
+	status = "okay";
+};
+
+/* TODO Parallel RRB */
+
+/* Colibri UART_B */
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+};
+
+/* Colibri UART_C */
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+};
+
+/* Colibri UART_A */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>;
+};
+
+/* Colibri FastEthernet */
+&fec1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-1 = <&pinctrl_fec1_sleep>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			max-speed = <100>;
+			reg = <2>;
+		};
+	};
+};
+
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-x2-pcieb";
+	fsl,refclk-pad-mode = "input";
+	status = "okay";
+};
+
+&hsio_refb_clk {
+	enable-gpios = <&gpio_expander_43 3 GPIO_ACTIVE_HIGH>;
+};
+
+/* Colibri SPI */
+&lpspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi2>;
+	cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>;
+};
+
+&lsio_gpio0 {
+	gpio-line-names = "",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_68",
+			  "",
+			  "",
+			  "SODIMM_82",
+			  "SODIMM_56",
+			  "SODIMM_28",
+			  "SODIMM_30",
+			  "",
+			  "SODIMM_61",
+			  "SODIMM_103",
+			  "SODIMM_79",
+			  "SODIMM_97",
+			  "",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_100";
+};
+
+&lsio_gpio1 {
+	gpio-line-names = "SODIMM_86",
+			  "SODIMM_92",
+			  "SODIMM_90",
+			  "SODIMM_88",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_59",
+			  "",
+			  "SODIMM_6",
+			  "SODIMM_8",
+			  "",
+			  "",
+			  "SODIMM_2",
+			  "SODIMM_4",
+			  "SODIMM_34",
+			  "SODIMM_32",
+			  "SODIMM_63",
+			  "SODIMM_55",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_36",
+			  "SODIMM_38",
+			  "SODIMM_21",
+			  "SODIMM_19",
+			  "SODIMM_140",
+			  "SODIMM_142",
+			  "SODIMM_196",
+			  "SODIMM_194",
+			  "SODIMM_186",
+			  "SODIMM_188",
+			  "SODIMM_138";
+};
+
+&lsio_gpio2 {
+	gpio-line-names = "SODIMM_23",
+			  "",
+			  "",
+			  "SODIMM_144";
+};
+
+&lsio_gpio3 {
+	gpio-line-names = "SODIMM_96",
+			  "SODIMM_75",
+			  "SODIMM_37",
+			  "SODIMM_29",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_69",
+			  "SODIMM_71",
+			  "SODIMM_73",
+			  "SODIMM_77",
+			  "SODIMM_89",
+			  "SODIMM_93",
+			  "SODIMM_95",
+			  "SODIMM_99",
+			  "SODIMM_105",
+			  "SODIMM_107",
+			  "SODIMM_98",
+			  "SODIMM_102",
+			  "SODIMM_104",
+			  "SODIMM_106";
+};
+
+&lsio_gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "SODIMM_129",
+			  "SODIMM_133",
+			  "SODIMM_127",
+			  "SODIMM_131",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_44",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_31",
+			  "SODIMM_47",
+			  "SODIMM_190",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53";
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "",
+			  "SODIMM_57",
+			  "SODIMM_65",
+			  "SODIMM_85",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_135",
+			  "SODIMM_137",
+			  "UNUSABLE_SODIMM_180",
+			  "UNUSABLE_SODIMM_184";
+};
+
+/* Colibri PWM_B */
+&lsio_pwm0 {
+	#pwm-cells = <3>;
+	pinctrl-0 = <&pinctrl_pwm_b>;
+	pinctrl-names = "default";
+};
+
+/* Colibri PWM_C */
+&lsio_pwm1 {
+	#pwm-cells = <3>;
+	pinctrl-0 = <&pinctrl_pwm_c>;
+	pinctrl-names = "default";
+};
+
+/* Colibri PWM_D */
+&lsio_pwm2 {
+	#pwm-cells = <3>;
+	pinctrl-0 = <&pinctrl_pwm_d>;
+	pinctrl-names = "default";
+};
+
+/* VPU Mailboxes */
+&mu_m0 {
+	status = "okay";
+};
+
+&mu1_m0 {
+	status = "okay";
+};
+
+/* TODO MIPI CSI */
+
+/* TODO MIPI DSI with DSI-to-HDMI bridge lt8912 */
+
+/* On-module PCIe for Wi-Fi */
+&pcieb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* On-module I2S */
+&sai0 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai0>;
+	status = "okay";
+};
+
+&thermal_zones {
+	pmic-thermal {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			pmic_cooling_map0: map0 {
+				trip = <&pmic_alert0>;
+				cooling-device = <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&usbotg1 {
+	adp-disable;
+	disable-over-current;
+	extcon = <&extcon_usbc_det &extcon_usbc_det>;
+	hnp-disable;
+	power-active-high;
+	srp-disable;
+	vbus-supply = <&reg_usbh_vbus>;
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "host";
+};
+
+/* On-module eMMC */
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	status = "okay";
+};
+
+/* Colibri SD/MMC Card */
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&lsio_gpio3 9 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_module_3v3>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
+	disable-wp;
+	no-1-8-v;
+};
+
+&vpu {
+	compatible = "nxp,imx8qxp-vpu";
+	status = "okay";
+};
+
+/* VPU Decoder */
+&vpu_core0 {
+	reg = <0x2d040000 0x10000>;
+	memory-region = <&decoder_boot>, <&decoder_rpc>;
+	status = "okay";
+};
+
+/* VPU Encoder */
+&vpu_core1 {
+	reg = <0x2d050000 0x10000>;
+	memory-region = <&encoder_boot>, <&encoder_rpc>;
+	status = "okay";
+};
+
+&iomuxc {
+	/* On-module touch pen-down interrupt */
+	pinctrl_ad7879_int: ad7879intgrp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05	0x21>;
+	};
+
+	/* Colibri Analogue Inputs */
+	pinctrl_adc0: adc0grp {
+		fsl,pins = <IMX8QXP_ADC_IN0_ADMA_ADC_IN0			0x60>,		/* SODIMM   8 */
+			   <IMX8QXP_ADC_IN1_ADMA_ADC_IN1			0x60>,		/* SODIMM   6 */
+			   <IMX8QXP_ADC_IN4_ADMA_ADC_IN4			0x60>,		/* SODIMM   4 */
+			   <IMX8QXP_ADC_IN5_ADMA_ADC_IN5			0x60>;		/* SODIMM   2 */
+	};
+
+	/* Atmel MXT touchsceen + Capacitive Touch Adapter */
+	/* NOTE: This pingroup conflicts with pingroups
+	 * pinctrl_pwm_b/pinctrl_pwm_c. Don't enable them
+	 * simultaneously.
+	 */
+	pinctrl_atmel_adap: atmeladaptergrp {
+		fsl,pins = <IMX8QXP_UART1_RX_LSIO_GPIO0_IO22			0x21>,		/* SODIMM  30 */
+			   <IMX8QXP_UART1_TX_LSIO_GPIO0_IO21			0x4000021>;	/* SODIMM  28 */
+	};
+
+	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
+	pinctrl_atmel_conn: atmelconnectorgrp {
+		fsl,pins = <IMX8QXP_QSPI0B_DATA2_LSIO_GPIO3_IO20		0x4000021>,	/* SODIMM 107 */
+			   <IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24		0x21>;		/* SODIMM 106 */
+	};
+
+	pinctrl_can_int: canintgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DQS_LSIO_GPIO3_IO13			0x40>;		/* SODIMM  73 */
+	};
+
+	pinctrl_csi_ctl: csictlgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14		0x20>,		/* SODIMM  77 */
+			   <IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15		0x20>;		/* SODIMM  89 */
+	};
+
+	pinctrl_csi_mclk: csimclkgrp {
+		fsl,pins = <IMX8QXP_CSI_MCLK_CI_PI_MCLK				0xC0000041>;	/* SODIMM  75 / X3-12 */
+	};
+
+	pinctrl_ext_io0: extio0grp {
+		fsl,pins = <IMX8QXP_ENET0_RGMII_RXD3_LSIO_GPIO5_IO08		0x06000040>;	/* SODIMM 135 */
+	};
+
+	/* Colibri Ethernet: On-module 100Mbps PHY Micrel KSZ8041 */
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000020>,
+			   <IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020>,
+			   <IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x61>,
+			   <IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT	0x06000061>,
+			   <IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x61>,
+			   <IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x61>,
+			   <IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x61>,
+			   <IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x61>,
+			   <IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x61>,
+			   <IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER	0x61>;
+	};
+
+	pinctrl_fec1_sleep: fec1slpgrp {
+		fsl,pins = <IMX8QXP_ENET0_MDC_LSIO_GPIO5_IO11			0x06000041>,
+			   <IMX8QXP_ENET0_MDIO_LSIO_GPIO5_IO10			0x06000041>,
+			   <IMX8QXP_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30		0x41>,
+			   <IMX8QXP_ENET0_RGMII_TXC_LSIO_GPIO4_IO29		0x41>,
+			   <IMX8QXP_ENET0_RGMII_TXD0_LSIO_GPIO4_IO31		0x41>,
+			   <IMX8QXP_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00		0x41>,
+			   <IMX8QXP_ENET0_RGMII_RX_CTL_LSIO_GPIO5_IO04		0x41>,
+			   <IMX8QXP_ENET0_RGMII_RXD0_LSIO_GPIO5_IO05		0x41>,
+			   <IMX8QXP_ENET0_RGMII_RXD1_LSIO_GPIO5_IO06		0x41>,
+			   <IMX8QXP_ENET0_RGMII_RXD2_LSIO_GPIO5_IO07		0x41>;
+	};
+
+	/* Colibri optional CAN on UART_B RTS/CTS */
+	pinctrl_flexcan1: flexcan0grp {
+		fsl,pins = <IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX		0x21>,		/* SODIMM  32 */
+			   <IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX		0x21>;		/* SODIMM  34 */
+	};
+
+	/* Colibri optional CAN on PS2 */
+	pinctrl_flexcan2: flexcan1grp {
+		fsl,pins = <IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX		0x21>,		/* SODIMM  55 */
+			   <IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX		0x21>;		/* SODIMM  63 */
+	};
+
+	/* Colibri optional CAN on UART_A TXD/RXD */
+	pinctrl_flexcan3: flexcan2grp {
+		fsl,pins = <IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX		0x21>,		/* SODIMM  35 */
+			   <IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX		0x21>;		/* SODIMM  33 */
+	};
+
+	/* Colibri LCD Back-Light GPIO */
+	pinctrl_gpio_bl_on: gpioblongrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA3_LSIO_GPIO3_IO12		0x60>;		/* SODIMM  71 */
+	};
+
+	/* HDMI Hot Plug Detect on FFC (X2) */
+	pinctrl_gpio_hpd: gpiohpdgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO31		0x20>;		/* SODIMM 138 */
+	};
+
+	pinctrl_gpiokeys: gpiokeysgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10		0x06700041>;	/* SODIMM  45 */
+	};
+
+	pinctrl_hog0: hog0grp {
+		fsl,pins = <IMX8QXP_CSI_D07_CI_PI_D09				0x61>,		/* SODIMM  65 */
+			   <IMX8QXP_QSPI0A_DATA2_LSIO_GPIO3_IO11		0x20>,		/* SODIMM  69 */
+			   <IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26			0x20>,		/* SODIMM  79 */
+			   <IMX8QXP_CSI_D02_CI_PI_D04				0x61>,		/* SODIMM  79 */
+			   <IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03		0x06000020>,	/* SODIMM  85 */
+			   <IMX8QXP_CSI_D06_CI_PI_D08				0x61>,		/* SODIMM  85 */
+			   <IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17			0x20>,		/* SODIMM  95 */
+			   <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27			0x20>,		/* SODIMM  97 */
+			   <IMX8QXP_CSI_D03_CI_PI_D05				0x61>,		/* SODIMM  97 */
+			   <IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18		0x20>,		/* SODIMM  99 */
+			   <IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28			0x20>,		/* SODIMM 101 */
+			   <IMX8QXP_CSI_D00_CI_PI_D02				0x61>,		/* SODIMM 101 */
+			   <IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25			0x20>,		/* SODIMM 103 */
+			   <IMX8QXP_CSI_D01_CI_PI_D03				0x61>,		/* SODIMM 103 */
+			   <IMX8QXP_QSPI0B_DATA1_LSIO_GPIO3_IO19		0x20>,		/* SODIMM 105 */
+			   <IMX8QXP_USB_SS3_TC2_LSIO_GPIO4_IO05			0x20>,		/* SODIMM 127 */
+			   <IMX8QXP_USB_SS3_TC3_LSIO_GPIO4_IO06			0x20>,		/* SODIMM 131 */
+			   <IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04			0x20>,		/* SODIMM 133 */
+			   <IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00			0x20>,		/* SODIMM  96 */
+			   <IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21		0x20>,		/* SODIMM  98 */
+			   <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31			0x20>,		/* SODIMM 100 */
+			   <IMX8QXP_QSPI0B_DQS_LSIO_GPIO3_IO22			0x20>,		/* SODIMM 102 */
+			   <IMX8QXP_QSPI0B_SS0_B_LSIO_GPIO3_IO23		0x20>;		/* SODIMM 104 */
+	};
+
+	pinctrl_hog1: hog1grp {
+		fsl,pins = <IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16			0x20>;		/* SODIMM  93 */
+	};
+
+	pinctrl_hog2: hog2grp {
+		fsl,pins = <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01			0x20>;		/* SODIMM  75 */
+	};
+
+	/*
+	 * This pin is used in the SCFW as a UART. Using it from
+	 * Linux would require rewriting the SCFW board file.
+	 */
+	pinctrl_hog_scfw: hogscfwgrp {
+		fsl,pins = <IMX8QXP_SCU_GPIO0_00_LSIO_GPIO2_IO03		0x20>;		/* SODIMM 144 */
+	};
+
+	/* On Module I2C */
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL		0x06000021>,
+			   <IMX8QXP_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA		0x06000021>;
+	};
+
+	/* MIPI DSI I2C accessible on SODIMM (X1) and FFC (X2) */
+	pinctrl_i2c0_mipi_lvds0: i2c0mipilvds0grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL	0xc6000020>,	/* SODIMM 140 */
+			   <IMX8QXP_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA	0xc6000020>;	/* SODIMM 142 */
+	};
+
+	/* MIPI CSI I2C accessible on SODIMM (X1) and FFC (X3) */
+	pinctrl_i2c0_mipi_lvds1: i2c0mipilvds1grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL	0xc6000020>,	/* SODIMM 186 */
+			   <IMX8QXP_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA	0xc6000020>;	/* SODIMM 188 */
+	};
+
+	/* Colibri I2C */
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL		0x06000021>,	/* SODIMM 196 */
+			   <IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA		0x06000021>;	/* SODIMM 194 */
+	};
+
+	/* Colibri Parallel RGB LCD Interface */
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <IMX8QXP_MCLK_OUT0_ADMA_LCDIF_CLK			0x60>,		/* SODIMM  56 */
+			   <IMX8QXP_SPI3_CS0_ADMA_LCDIF_HSYNC			0x60>,		/* SODIMM  68 */
+			   <IMX8QXP_MCLK_IN0_ADMA_LCDIF_VSYNC			0x60>,		/* SODIMM  82 */
+			   <IMX8QXP_MCLK_IN1_ADMA_LCDIF_EN			0x40>,		/* SODIMM  44 */
+			   <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19		0x40>,		/* SODIMM  44 */
+			   <IMX8QXP_ESAI0_FSR_ADMA_LCDIF_D00			0x60>,		/* SODIMM  76 */
+			   <IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21			0x60>,		/* SODIMM  76 */
+			   <IMX8QXP_ESAI0_FST_ADMA_LCDIF_D01			0x60>,		/* SODIMM  70 */
+			   <IMX8QXP_ESAI0_SCKR_ADMA_LCDIF_D02			0x60>,		/* SODIMM  60 */
+			   <IMX8QXP_ESAI0_SCKT_ADMA_LCDIF_D03			0x60>,		/* SODIMM  58 */
+			   <IMX8QXP_ESAI0_TX0_ADMA_LCDIF_D04			0x60>,		/* SODIMM  78 */
+			   <IMX8QXP_ESAI0_TX1_ADMA_LCDIF_D05			0x60>,		/* SODIMM  72 */
+			   <IMX8QXP_ESAI0_TX2_RX3_ADMA_LCDIF_D06		0x60>,		/* SODIMM  80 */
+			   <IMX8QXP_ESAI0_TX3_RX2_ADMA_LCDIF_D07		0x60>,		/* SODIMM  46 */
+			   <IMX8QXP_ESAI0_TX4_RX1_ADMA_LCDIF_D08		0x60>,		/* SODIMM  62 */
+			   <IMX8QXP_ESAI0_TX5_RX0_ADMA_LCDIF_D09		0x60>,		/* SODIMM  48 */
+			   <IMX8QXP_SPDIF0_RX_ADMA_LCDIF_D10			0x60>,		/* SODIMM  74 */
+			   <IMX8QXP_SPDIF0_TX_ADMA_LCDIF_D11			0x60>,		/* SODIMM  50 */
+			   <IMX8QXP_SPDIF0_EXT_CLK_ADMA_LCDIF_D12		0x60>,		/* SODIMM  52 */
+			   <IMX8QXP_SPI3_SCK_ADMA_LCDIF_D13			0x60>,		/* SODIMM  54 */
+			   <IMX8QXP_SPI3_SDO_ADMA_LCDIF_D14			0x60>,		/* SODIMM  66 */
+			   <IMX8QXP_SPI3_SDI_ADMA_LCDIF_D15			0x60>,		/* SODIMM  64 */
+			   <IMX8QXP_SPI3_CS1_ADMA_LCDIF_D16			0x60>,		/* SODIMM  57 */
+			   <IMX8QXP_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01		0x60>,		/* SODIMM  57 */
+			   <IMX8QXP_UART1_CTS_B_ADMA_LCDIF_D17			0x60>;		/* SODIMM  61 */
+	};
+
+	/* Colibri SPI */
+	pinctrl_lpspi2: lpspi2grp {
+		fsl,pins = <IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00			0x21>,		/* SODIMM  86 */
+			   <IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO			0x06000040>,	/* SODIMM  92 */
+			   <IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI			0x06000040>,	/* SODIMM  90 */
+			   <IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK			0x06000040>;	/* SODIMM  88 */
+	};
+
+	pinctrl_lpspi2_cs2: lpspi2cs2grp {
+		fsl,pins = <IMX8QXP_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02		0x21>;		/* SODIMM  65 */
+	};
+
+	/* Colibri UART_B */
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <IMX8QXP_UART0_RX_ADMA_UART0_RX			0x06000020>,	/* SODIMM  36 */
+			   <IMX8QXP_UART0_TX_ADMA_UART0_TX			0x06000020>,	/* SODIMM  38 */
+			   <IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B		0x06000020>,	/* SODIMM  34 */
+			   <IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B		0x06000020>;	/* SODIMM  32 */
+	};
+
+	/* Colibri UART_C */
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <IMX8QXP_UART2_RX_ADMA_UART2_RX			0x06000020>,	/* SODIMM  19 */
+			   <IMX8QXP_UART2_TX_ADMA_UART2_TX			0x06000020>;	/* SODIMM  21 */
+	};
+
+	/* Colibri UART_A */
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX			0x06000020>,	/* SODIMM  33 */
+			   <IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX			0x06000020>;	/* SODIMM  35 */
+	};
+
+	/* Colibri UART_A Control */
+	pinctrl_lpuart3_ctrl: lpuart3ctrlgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00		0x20>,		/* SODIMM  23 */
+			   <IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29			0x20>,		/* SODIMM  25 */
+			   <IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30			0x20>,		/* SODIMM  27 */
+			   <IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03			0x20>,		/* SODIMM  29 */
+			   <IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22			0x20>,		/* SODIMM  31 */
+			   <IMX8QXP_CSI_EN_LSIO_GPIO3_IO02			0x20>;		/* SODIMM  37 */
+	};
+
+	/* On module wifi module */
+	pinctrl_pcieb: pciebgrp {
+		fsl,pins = <IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01		0x04000061>,	/* SODIMM 178 */
+			   <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02		0x04000061>,	/* SODIMM  94 */
+			   <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00		0x60>;		/* SODIMM  81 */
+	};
+
+	/* Colibri PWM_A */
+	pinctrl_pwm_a: pwmagrp {
+	/* both pins are connected together, reserve the unused CSI_D05 */
+		fsl,pins = <IMX8QXP_CSI_D05_CI_PI_D07				0x61>,		/* SODIMM  59 */
+			   <IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT			0x60>;		/* SODIMM  59 */
+	};
+
+	/* Colibri PWM_B */
+	pinctrl_pwm_b: pwmbgrp {
+		fsl,pins = <IMX8QXP_UART1_TX_LSIO_PWM0_OUT			0x60>;		/* SODIMM  28 */
+	};
+
+	/* Colibri PWM_C */
+	pinctrl_pwm_c: pwmcgrp {
+		fsl,pins = <IMX8QXP_UART1_RX_LSIO_PWM1_OUT			0x60>;		/* SODIMM  30 */
+	};
+
+	/* Colibri PWM_D */
+	pinctrl_pwm_d: pwmdgrp {
+	/* both pins are connected together, reserve the unused CSI_D04 */
+		fsl,pins = <IMX8QXP_CSI_D04_CI_PI_D06				0x61>,		/* SODIMM  67 */
+			   <IMX8QXP_UART1_RTS_B_LSIO_PWM2_OUT			0x60>;		/* SODIMM  67 */
+	};
+
+	/* On-module I2S */
+	pinctrl_sai0: sai0grp {
+		fsl,pins = <IMX8QXP_SPI0_SDI_ADMA_SAI0_TXD			0x06000040>,
+			   <IMX8QXP_SPI0_CS0_ADMA_SAI0_RXD			0x06000040>,
+			   <IMX8QXP_SPI0_SCK_ADMA_SAI0_TXC			0x06000040>,
+			   <IMX8QXP_SPI0_SDO_ADMA_SAI0_TXFS			0x06000040>;
+	};
+
+	/* Colibri Audio Analogue Microphone GND */
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_I2C0_SDA_LSIO_GPIO3_IO06		0x41>;
+	};
+
+	/* On-module SGTL5000 clock */
+	pinctrl_sgtl5000_usb_clk: sgtl5000usbclkgrp {
+		fsl,pins = <IMX8QXP_ADC_IN3_ADMA_ACM_MCLK_OUT0			0x21>;
+	};
+
+	/* On-module USB interrupt */
+	pinctrl_usb3503a: usb3503agrp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04		0x61>;
+	};
+
+	/* Colibri USB Client Cable Detect */
+	pinctrl_usbc_det: usbcdetgrp {
+		fsl,pins = <IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09	0x06000040>;	/* SODIMM 137 */
+	};
+
+	/* USB Host Power Enable */
+	pinctrl_usbh1_reg: usbh1reggrp {
+		fsl,pins = <IMX8QXP_USB_SS3_TC0_LSIO_GPIO4_IO03			0x06000040>;	/* SODIMM 129 */
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x21>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41>,
+			   <IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x21>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x21>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41>,
+			   <IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x21>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x21>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41>,
+			   <IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x21>;
+	};
+
+	/* Colibri SD/MMC Card Detect */
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09		0x06000021>;	/* SODIMM  43 */
+	};
+
+	pinctrl_usdhc2_gpio_sleep: usdhc2gpioslpgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09		0x60>;		/* SODIMM  43 */
+	};
+
+	/* Colibri SD/MMC Card */
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041>,	/* SODIMM  47 */
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x21>,		/* SODIMM 190 */
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21>,		/* SODIMM 192 */
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21>,		/* SODIMM  49 */
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21>,		/* SODIMM  51 */
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21>,		/* SODIMM  53 */
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041>,	/* SODIMM  47 */
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x21>,		/* SODIMM 190 */
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21>,		/* SODIMM 192 */
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21>,		/* SODIMM  49 */
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21>,		/* SODIMM  51 */
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21>,		/* SODIMM  53 */
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041>,	/* SODIMM  47 */
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x21>,		/* SODIMM 190 */
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21>,		/* SODIMM 192 */
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21>,		/* SODIMM  49 */
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21>,		/* SODIMM  51 */
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21>,		/* SODIMM  53 */
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2slpgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_LSIO_GPIO4_IO23			0x60>,		/* SODIMM  47 */
+			   <IMX8QXP_USDHC1_CMD_LSIO_GPIO4_IO24			0x60>,		/* SODIMM 190 */
+			   <IMX8QXP_USDHC1_DATA0_LSIO_GPIO4_IO25		0x60>,		/* SODIMM 192 */
+			   <IMX8QXP_USDHC1_DATA1_LSIO_GPIO4_IO26		0x60>,		/* SODIMM  49 */
+			   <IMX8QXP_USDHC1_DATA2_LSIO_GPIO4_IO27		0x60>,		/* SODIMM  51 */
+			   <IMX8QXP_USDHC1_DATA3_LSIO_GPIO4_IO28		0x60>,		/* SODIMM  53 */
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21>;
+	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <IMX8QXP_SCU_BOOT_MODE3_SCU_DSC_RTC_CLOCK_OUTPUT_32K	0x20>;
+	};
+};
+
+/* Delete peripherals which are not present on SOC, but are defined in imx8-ss-*.dtsi */
+
+/delete-node/ &adc1;
+/delete-node/ &adc1_lpcg;
+/delete-node/ &dsp;
+/delete-node/ &dsp_lpcg;
diff --git a/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
new file mode 100644
index 000000000000..aca78768dbd4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
@@ -0,0 +1,674 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx91.dtsi"
+
+/ {
+	compatible = "fsl,imx91-11x11-evk", "fsl,imx91";
+	model = "NXP i.MX91 11X11 EVK board";
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vref_1v8";
+	};
+
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "audio-pwr";
+		gpio = <&adp5585 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VSD_3V3";
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			reusable;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&eqos {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-1 = <&pinctrl_eqos_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&fec {
+	phy-handle = <&ethphy2>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-1 = <&pinctrl_fec_sleep>;
+	pinctrl-names = "default", "sleep";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	audio_codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX93_CLK_SAI3_GATE>;
+		AVDD-supply = <&reg_audio_pwr>;
+		CPVDD-supply = <&reg_audio_pwr>;
+		DBVDD-supply = <&reg_audio_pwr>;
+		DCVDD-supply = <&reg_audio_pwr>;
+		MICVDD-supply = <&reg_audio_pwr>;
+		PLLVDD-supply = <&reg_audio_pwr>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+		SPKVDD2-supply = <&reg_audio_pwr>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	inertial-meter@6a {
+		compatible = "st,lsm6dso";
+		reg = <0x6a>;
+	};
+};
+
+&lpi2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio3>;
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		pinctrl-names = "default";
+	};
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&pcal6524>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2237500>;
+				regulator-min-microvolt = <650000>;
+				regulator-name = "BUCK1";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2187500>;
+				regulator-min-microvolt = <600000>;
+				regulator-name = "BUCK2";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+				regulator-name = "BUCK4";
+			};
+
+			buck5: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+				regulator-name = "BUCK5";
+			};
+
+			buck6: BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+				regulator-name = "BUCK6";
+			};
+
+			ldo1: LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1600000>;
+				regulator-name = "LDO1";
+			};
+
+			ldo4: LDO4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "LDO4";
+			};
+
+			ldo5: LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "LDO5";
+			};
+		};
+	};
+
+	adp5585: io-expander@34 {
+		compatible = "adi,adp5585-00", "adi,adp5585";
+		reg = <0x34>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#pwm-cells = <3>;
+		gpio-reserved-ranges = <5 1>;
+
+		exp-sel-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio3>;
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <15000000>;
+			power-role = "dual";
+			self-powered;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec1_dr_sw: endpoint {
+						remote-endpoint = <&usb1_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
+	ptn5110_2: tcpc@51 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x51>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio3>;
+		status = "okay";
+
+		typec2_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <15000000>;
+			power-role = "dual";
+			self-powered;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec2_dr_sw: endpoint {
+						remote-endpoint = <&usb2_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
+	pcf2131: rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&pcal6524>;
+		status = "okay";
+	};
+};
+
+&lpuart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lpuart5 {
+	pinctrl-0 = <&pinctrl_uart5>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&usbotg1 {
+	adp-disable;
+	disable-over-current;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	usb-role-switch;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usbotg2 {
+	adp-disable;
+	disable-over-current;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	usb-role-switch;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	status = "okay";
+
+	port {
+		usb2_drd_sw: endpoint {
+			remote-endpoint = <&typec2_dr_sw>;
+		};
+	};
+};
+
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	status = "okay";
+};
+
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	no-mmc;
+	no-sdio;
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&wdog3 {
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX91_PAD_ENET1_MDC__ENET1_MDC                           0x57e
+			MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO                      0x57e
+			MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0                  0x57e
+			MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1                  0x57e
+			MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2                  0x57e
+			MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3                  0x57e
+			MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC                  0x5fe
+			MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL            0x57e
+			MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0                  0x57e
+			MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1                     0x57e
+			MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2                  0x57e
+			MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3                  0x57e
+			MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK  0x5fe
+			MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL            0x57e
+		>;
+	};
+
+	pinctrl_eqos_sleep: eqossleepgrp {
+		fsl,pins = <
+			MX91_PAD_ENET1_MDC__GPIO4_IO0                           0x31e
+			MX91_PAD_ENET1_MDIO__GPIO4_IO1                          0x31e
+			MX91_PAD_ENET1_RD0__GPIO4_IO10                          0x31e
+			MX91_PAD_ENET1_RD1__GPIO4_IO11                          0x31e
+			MX91_PAD_ENET1_RD2__GPIO4_IO12                          0x31e
+			MX91_PAD_ENET1_RD3__GPIO4_IO13                          0x31e
+			MX91_PAD_ENET1_RXC__GPIO4_IO9                           0x31e
+			MX91_PAD_ENET1_RX_CTL__GPIO4_IO8                        0x31e
+			MX91_PAD_ENET1_TD0__GPIO4_IO5                           0x31e
+			MX91_PAD_ENET1_TD1__GPIO4_IO4                           0x31e
+			MX91_PAD_ENET1_TD2__GPIO4_IO3                           0x31e
+			MX91_PAD_ENET1_TD3__GPIO4_IO2                           0x31e
+			MX91_PAD_ENET1_TXC__GPIO4_IO7                           0x31e
+			MX91_PAD_ENET1_TX_CTL__GPIO4_IO6                        0x31e
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX91_PAD_ENET2_MDC__ENET2_MDC                           0x57e
+			MX91_PAD_ENET2_MDIO__ENET2_MDIO                         0x57e
+			MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0                     0x57e
+			MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1                     0x57e
+			MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2                     0x57e
+			MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3                     0x57e
+			MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC                     0x5fe
+			MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL               0x57e
+			MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0                     0x57e
+			MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1                     0x57e
+			MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2                     0x57e
+			MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3                     0x57e
+			MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC                     0x5fe
+			MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL               0x57e
+		>;
+	};
+
+	pinctrl_fec_sleep: fecsleepgrp {
+		fsl,pins = <
+			MX91_PAD_ENET2_MDC__GPIO4_IO14                          0x51e
+			MX91_PAD_ENET2_MDIO__GPIO4_IO15                         0x51e
+			MX91_PAD_ENET2_RD0__GPIO4_IO24                          0x51e
+			MX91_PAD_ENET2_RD1__GPIO4_IO25                          0x51e
+			MX91_PAD_ENET2_RD2__GPIO4_IO26                          0x51e
+			MX91_PAD_ENET2_RD3__GPIO4_IO27                          0x51e
+			MX91_PAD_ENET2_RXC__GPIO4_IO23                          0x51e
+			MX91_PAD_ENET2_RX_CTL__GPIO4_IO22                       0x51e
+			MX91_PAD_ENET2_TD0__GPIO4_IO19                          0x51e
+			MX91_PAD_ENET2_TD1__GPIO4_IO18                          0x51e
+			MX91_PAD_ENET2_TD2__GPIO4_IO17                          0x51e
+			MX91_PAD_ENET2_TD3__GPIO4_IO16                          0x51e
+			MX91_PAD_ENET2_TXC__GPIO4_IO21                          0x51e
+			MX91_PAD_ENET2_TX_CTL__GPIO4_IO20                       0x51e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX91_PAD_I2C1_SCL__LPI2C1_SCL                           0x40000b9e
+			MX91_PAD_I2C1_SDA__LPI2C1_SDA                           0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX91_PAD_I2C2_SCL__LPI2C2_SCL                           0x40000b9e
+			MX91_PAD_I2C2_SDA__LPI2C2_SDA                           0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX91_PAD_GPIO_IO28__LPI2C3_SDA                          0x40000b9e
+			MX91_PAD_GPIO_IO29__LPI2C3_SCL                          0x40000b9e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			MX91_PAD_CCM_CLKO2__GPIO3_IO27                          0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_RESET_B__GPIO3_IO7                         0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX91_PAD_UART1_RXD__LPUART1_RX                          0x31e
+			MX91_PAD_UART1_TXD__LPUART1_TX                          0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX91_PAD_DAP_TDO_TRACESWO__LPUART5_TX                   0x31e
+			MX91_PAD_DAP_TDI__LPUART5_RX                            0x31e
+			MX91_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B                   0x31e
+			MX91_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B                  0x31e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK                            0x158e
+			MX91_PAD_SD1_CMD__USDHC1_CMD                            0x138e
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0                        0x138e
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1                        0x138e
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2                        0x138e
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3                        0x138e
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4                        0x138e
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5                        0x138e
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6                        0x138e
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7                        0x138e
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE                      0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK                            0x15fe
+			MX91_PAD_SD1_CMD__USDHC1_CMD                            0x13fe
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0                        0x13fe
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1                        0x13fe
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2                        0x13fe
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3                        0x13fe
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4                        0x13fe
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5                        0x13fe
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6                        0x13fe
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7                        0x13fe
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE                      0x15fe
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK                            0x1582
+			MX91_PAD_SD1_CMD__USDHC1_CMD                            0x1382
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0                        0x1382
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1                        0x1382
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2                        0x1382
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3                        0x1382
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4                        0x1382
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5                        0x1382
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6                        0x1382
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7                        0x1382
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE                      0x1582
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK                            0x158e
+			MX91_PAD_SD2_CMD__USDHC2_CMD                            0x138e
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0                        0x138e
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1                        0x138e
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2                        0x138e
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3                        0x138e
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                    0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK                            0x15fe
+			MX91_PAD_SD2_CMD__USDHC2_CMD                            0x13fe
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0                        0x13fe
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1                        0x13fe
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2                        0x13fe
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3                        0x13fe
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                    0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CD_B__GPIO3_IO0                            0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleepgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CD_B__GPIO3_IO0                            0x51e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK                            0x1582
+			MX91_PAD_SD2_CMD__USDHC2_CMD                            0x1382
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0                        0x1382
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1                        0x1382
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2                        0x1382
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3                        0x1382
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                    0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2sleepgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__GPIO3_IO1                             0x51e
+			MX91_PAD_SD2_CMD__GPIO3_IO2                             0x51e
+			MX91_PAD_SD2_DATA0__GPIO3_IO3                           0x51e
+			MX91_PAD_SD2_DATA1__GPIO3_IO4                           0x51e
+			MX91_PAD_SD2_DATA2__GPIO3_IO5                           0x51e
+			MX91_PAD_SD2_DATA3__GPIO3_IO6                           0x51e
+			MX91_PAD_SD2_VSELECT__GPIO3_IO19                        0x51e
+		>;
+	};
+
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91-pinfunc.h b/arch/arm64/boot/dts/freescale/imx91-pinfunc.h
new file mode 100644
index 000000000000..3e19945f5ce3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-pinfunc.h
@@ -0,0 +1,770 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright 2025 NXP
+ */
+
+#ifndef __DTS_IMX91_PINFUNC_H
+#define __DTS_IMX91_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX91_PAD_DAP_TDI__JTAG_MUX_TDI                                           0x0000 0x01b0 0x03d8 0x00 0x00
+#define MX91_PAD_DAP_TDI__MQS2_LEFT                                              0x0000 0x01b0 0x0000 0x01 0x00
+#define MX91_PAD_DAP_TDI__CAN2_TX                                                0x0000 0x01b0 0x0000 0x03 0x00
+#define MX91_PAD_DAP_TDI__FLEXIO2_FLEXIO30                                       0x0000 0x01b0 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TDI__GPIO3_IO28                                             0x0000 0x01b0 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TDI__LPUART5_RX                                             0x0000 0x01b0 0x0488 0x06 0x00
+
+#define MX91_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS                                     0x0004 0x01b4 0x03dc 0x00 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO31                                 0x0004 0x01b4 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__GPIO3_IO29                                       0x0004 0x01b4 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B                                    0x0004 0x01b4 0x0000 0x06 0x00
+
+#define MX91_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK                                    0x0008 0x01b8 0x03d4 0x00 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO30                                0x0008 0x01b8 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__GPIO3_IO30                                      0x0008 0x01b8 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B                                   0x0008 0x01b8 0x0484 0x06 0x00
+
+#define MX91_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO                                  0x000c 0x01bc 0x0000 0x00 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT                                    0x000c 0x01bc 0x0000 0x01 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__CAN2_RX                                       0x000c 0x01bc 0x0364 0x03 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO31                              0x000c 0x01bc 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__GPIO3_IO31                                    0x000c 0x01bc 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__LPUART5_TX                                    0x000c 0x01bc 0x048c 0x06 0x00
+
+#define MX91_PAD_GPIO_IO00__GPIO2_IO0                                            0x0010 0x01c0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO00__LPI2C3_SDA                                           0x0010 0x01c0 0x03f4 0x01 0x00
+#define MX91_PAD_GPIO_IO00__MEDIAMIX_CAM_CLK                                     0x0010 0x01c0 0x04bc 0x02 0x00
+#define MX91_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK                                    0x0010 0x01c0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO00__LPSPI6_PCS0                                          0x0010 0x01c0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO00__LPUART5_TX                                           0x0010 0x01c0 0x048c 0x05 0x01
+#define MX91_PAD_GPIO_IO00__LPI2C5_SDA                                           0x0010 0x01c0 0x0404 0x06 0x00
+#define MX91_PAD_GPIO_IO00__FLEXIO1_FLEXIO0                                      0x0010 0x01c0 0x036c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO01__GPIO2_IO1                                            0x0014 0x01c4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO01__LPI2C3_SCL                                           0x0014 0x01c4 0x03f0 0x01 0x00
+#define MX91_PAD_GPIO_IO01__MEDIAMIX_CAM_DATA0                                   0x0014 0x01c4 0x0490 0x02 0x00
+#define MX91_PAD_GPIO_IO01__MEDIAMIX_DISP_DE                                     0x0014 0x01c4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO01__LPSPI6_SIN                                           0x0014 0x01c4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO01__LPUART5_RX                                           0x0014 0x01c4 0x0488 0x05 0x01
+#define MX91_PAD_GPIO_IO01__LPI2C5_SCL                                           0x0014 0x01c4 0x0400 0x06 0x00
+#define MX91_PAD_GPIO_IO01__FLEXIO1_FLEXIO1                                      0x0014 0x01c4 0x0370 0x07 0x00
+
+#define MX91_PAD_GPIO_IO02__GPIO2_IO2                                            0x0018 0x01c8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO02__LPI2C4_SDA                                           0x0018 0x01c8 0x03fc 0x01 0x00
+#define MX91_PAD_GPIO_IO02__MEDIAMIX_CAM_VSYNC                                   0x0018 0x01c8 0x04c0 0x02 0x00
+#define MX91_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC                                  0x0018 0x01c8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO02__LPSPI6_SOUT                                          0x0018 0x01c8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO02__LPUART5_CTS_B                                        0x0018 0x01c8 0x0484 0x05 0x01
+#define MX91_PAD_GPIO_IO02__LPI2C6_SDA                                           0x0018 0x01c8 0x040c 0x06 0x00
+#define MX91_PAD_GPIO_IO02__FLEXIO1_FLEXIO2                                      0x0018 0x01c8 0x0374 0x07 0x00
+
+#define MX91_PAD_GPIO_IO03__GPIO2_IO3                                            0x001c 0x01cc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO03__LPI2C4_SCL                                           0x001c 0x01cc 0x03f8 0x01 0x00
+#define MX91_PAD_GPIO_IO03__MEDIAMIX_CAM_HSYNC                                   0x001c 0x01cc 0x04b8 0x02 0x00
+#define MX91_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC                                  0x001c 0x01cc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO03__LPSPI6_SCK                                           0x001c 0x01cc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO03__LPUART5_RTS_B                                        0x001c 0x01cc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO03__LPI2C6_SCL                                           0x001c 0x01cc 0x0408 0x06 0x00
+#define MX91_PAD_GPIO_IO03__FLEXIO1_FLEXIO3                                      0x001c 0x01cc 0x0378 0x07 0x00
+
+#define MX91_PAD_GPIO_IO04__GPIO2_IO4                                            0x0020 0x01d0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO04__TPM3_CH0                                             0x0020 0x01d0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO04__PDM_CLK                                              0x0020 0x01d0 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA0                                  0x0020 0x01d0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO04__LPSPI7_PCS0                                          0x0020 0x01d0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO04__LPUART6_TX                                           0x0020 0x01d0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO04__LPI2C6_SDA                                           0x0020 0x01d0 0x040c 0x06 0x01
+#define MX91_PAD_GPIO_IO04__FLEXIO1_FLEXIO4                                      0x0020 0x01d0 0x037c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO05__GPIO2_IO5                                            0x0024 0x01d4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO05__TPM4_CH0                                             0x0024 0x01d4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO05__PDM_BIT_STREAM0                                      0x0024 0x01d4 0x04c4 0x02 0x00
+#define MX91_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA1                                  0x0024 0x01d4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO05__LPSPI7_SIN                                           0x0024 0x01d4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO05__LPUART6_RX                                           0x0024 0x01d4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO05__LPI2C6_SCL                                           0x0024 0x01d4 0x0408 0x06 0x01
+#define MX91_PAD_GPIO_IO05__FLEXIO1_FLEXIO5                                      0x0024 0x01d4 0x0380 0x07 0x00
+
+#define MX91_PAD_GPIO_IO06__GPIO2_IO6                                            0x0028 0x01d8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO06__TPM5_CH0                                             0x0028 0x01d8 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO06__PDM_BIT_STREAM1                                      0x0028 0x01d8 0x04c8 0x02 0x00
+#define MX91_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA2                                  0x0028 0x01d8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO06__LPSPI7_SOUT                                          0x0028 0x01d8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO06__LPUART6_CTS_B                                        0x0028 0x01d8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO06__LPI2C7_SDA                                           0x0028 0x01d8 0x0414 0x06 0x00
+#define MX91_PAD_GPIO_IO06__FLEXIO1_FLEXIO6                                      0x0028 0x01d8 0x0384 0x07 0x00
+
+#define MX91_PAD_GPIO_IO07__GPIO2_IO7                                            0x002c 0x01dc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO07__LPSPI3_PCS1                                          0x002c 0x01dc 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO07__MEDIAMIX_CAM_DATA1                                   0x002c 0x01dc 0x0494 0x02 0x00
+#define MX91_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA3                                  0x002c 0x01dc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO07__LPSPI7_SCK                                           0x002c 0x01dc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO07__LPUART6_RTS_B                                        0x002c 0x01dc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO07__LPI2C7_SCL                                           0x002c 0x01dc 0x0410 0x06 0x00
+#define MX91_PAD_GPIO_IO07__FLEXIO1_FLEXIO7                                      0x002c 0x01dc 0x0388 0x07 0x00
+
+#define MX91_PAD_GPIO_IO08__GPIO2_IO8                                            0x0030 0x01e0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO08__LPSPI3_PCS0                                          0x0030 0x01e0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO08__MEDIAMIX_CAM_DATA2                                   0x0030 0x01e0 0x0498 0x02 0x00
+#define MX91_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA4                                  0x0030 0x01e0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO08__TPM6_CH0                                             0x0030 0x01e0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO08__LPUART7_TX                                           0x0030 0x01e0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO08__LPI2C7_SDA                                           0x0030 0x01e0 0x0414 0x06 0x01
+#define MX91_PAD_GPIO_IO08__FLEXIO1_FLEXIO8                                      0x0030 0x01e0 0x038c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO09__GPIO2_IO9                                            0x0034 0x01e4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO09__LPSPI3_SIN                                           0x0034 0x01e4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO09__MEDIAMIX_CAM_DATA3                                   0x0034 0x01e4 0x049c 0x02 0x00
+#define MX91_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA5                                  0x0034 0x01e4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO09__TPM3_EXTCLK                                          0x0034 0x01e4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO09__LPUART7_RX                                           0x0034 0x01e4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO09__LPI2C7_SCL                                           0x0034 0x01e4 0x0410 0x06 0x01
+#define MX91_PAD_GPIO_IO09__FLEXIO1_FLEXIO9                                      0x0034 0x01e4 0x0390 0x07 0x00
+
+#define MX91_PAD_GPIO_IO10__GPIO2_IO10                                           0x0038 0x01e8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO10__LPSPI3_SOUT                                          0x0038 0x01e8 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO10__MEDIAMIX_CAM_DATA4                                   0x0038 0x01e8 0x04a0 0x02 0x00
+#define MX91_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA6                                  0x0038 0x01e8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO10__TPM4_EXTCLK                                          0x0038 0x01e8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO10__LPUART7_CTS_B                                        0x0038 0x01e8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO10__LPI2C8_SDA                                           0x0038 0x01e8 0x041c 0x06 0x00
+#define MX91_PAD_GPIO_IO10__FLEXIO1_FLEXIO10                                     0x0038 0x01e8 0x0394 0x07 0x00
+
+#define MX91_PAD_GPIO_IO11__GPIO2_IO11                                           0x003c 0x01ec 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO11__LPSPI3_SCK                                           0x003c 0x01ec 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO11__MEDIAMIX_CAM_DATA5                                   0x003c 0x01ec 0x04a4 0x02 0x00
+#define MX91_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA7                                  0x003c 0x01ec 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO11__TPM5_EXTCLK                                          0x003c 0x01ec 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO11__LPUART7_RTS_B                                        0x003c 0x01ec 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO11__LPI2C8_SCL                                           0x003c 0x01ec 0x0418 0x06 0x00
+#define MX91_PAD_GPIO_IO11__FLEXIO1_FLEXIO11                                     0x003c 0x01ec 0x0398 0x07 0x00
+
+#define MX91_PAD_GPIO_IO12__GPIO2_IO12                                           0x0040 0x01f0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO12__TPM3_CH2                                             0x0040 0x01f0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO12__PDM_BIT_STREAM2                                      0x0040 0x01f0 0x04cc 0x02 0x00
+#define MX91_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA8                                  0x0040 0x01f0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO12__LPSPI8_PCS0                                          0x0040 0x01f0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO12__LPUART8_TX                                           0x0040 0x01f0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO12__LPI2C8_SDA                                           0x0040 0x01f0 0x041c 0x06 0x01
+#define MX91_PAD_GPIO_IO12__SAI3_RX_SYNC                                         0x0040 0x01f0 0x04dc 0x07 0x00
+
+#define MX91_PAD_GPIO_IO13__GPIO2_IO13                                           0x0044 0x01f4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO13__TPM4_CH2                                             0x0044 0x01f4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO13__PDM_BIT_STREAM3                                      0x0044 0x01f4 0x04d0 0x02 0x00
+#define MX91_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA9                                  0x0044 0x01f4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO13__LPSPI8_SIN                                           0x0044 0x01f4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO13__LPUART8_RX                                           0x0044 0x01f4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO13__LPI2C8_SCL                                           0x0044 0x01f4 0x0418 0x06 0x01
+#define MX91_PAD_GPIO_IO13__FLEXIO1_FLEXIO13                                     0x0044 0x01f4 0x039c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO14__GPIO2_IO14                                           0x0048 0x01f8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO14__LPUART3_TX                                           0x0048 0x01f8 0x0474 0x01 0x00
+#define MX91_PAD_GPIO_IO14__MEDIAMIX_CAM_DATA6                                   0x0048 0x01f8 0x04a8 0x02 0x00
+#define MX91_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10                                 0x0048 0x01f8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO14__LPSPI8_SOUT                                          0x0048 0x01f8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO14__LPUART8_CTS_B                                        0x0048 0x01f8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO14__LPUART4_TX                                           0x0048 0x01f8 0x0480 0x06 0x00
+#define MX91_PAD_GPIO_IO14__FLEXIO1_FLEXIO14                                     0x0048 0x01f8 0x03a0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO15__GPIO2_IO15                                           0x004c 0x01fc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO15__LPUART3_RX                                           0x004c 0x01fc 0x0470 0x01 0x00
+#define MX91_PAD_GPIO_IO15__MEDIAMIX_CAM_DATA7                                   0x004c 0x01fc 0x04ac 0x02 0x00
+#define MX91_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11                                 0x004c 0x01fc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO15__LPSPI8_SCK                                           0x004c 0x01fc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO15__LPUART8_RTS_B                                        0x004c 0x01fc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO15__LPUART4_RX                                           0x004c 0x01fc 0x047c 0x06 0x00
+#define MX91_PAD_GPIO_IO15__FLEXIO1_FLEXIO15                                     0x004c 0x01fc 0x03a4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO16__GPIO2_IO16                                           0x0050 0x0200 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO16__SAI3_TX_BCLK                                         0x0050 0x0200 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO16__PDM_BIT_STREAM2                                      0x0050 0x0200 0x04cc 0x02 0x01
+#define MX91_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12                                 0x0050 0x0200 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO16__LPUART3_CTS_B                                        0x0050 0x0200 0x046c 0x04 0x00
+#define MX91_PAD_GPIO_IO16__LPSPI4_PCS2                                          0x0050 0x0200 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO16__LPUART4_CTS_B                                        0x0050 0x0200 0x0478 0x06 0x00
+#define MX91_PAD_GPIO_IO16__FLEXIO1_FLEXIO16                                     0x0050 0x0200 0x03a8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO17__GPIO2_IO17                                           0x0054 0x0204 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO17__SAI3_MCLK                                            0x0054 0x0204 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO17__MEDIAMIX_CAM_DATA8                                   0x0054 0x0204 0x04b0 0x02 0x00
+#define MX91_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13                                 0x0054 0x0204 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO17__LPUART3_RTS_B                                        0x0054 0x0204 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO17__LPSPI4_PCS1                                          0x0054 0x0204 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO17__LPUART4_RTS_B                                        0x0054 0x0204 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO17__FLEXIO1_FLEXIO17                                     0x0054 0x0204 0x03ac 0x07 0x00
+
+#define MX91_PAD_GPIO_IO18__GPIO2_IO18                                           0x0058 0x0208 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO18__SAI3_RX_BCLK                                         0x0058 0x0208 0x04d8 0x01 0x00
+#define MX91_PAD_GPIO_IO18__MEDIAMIX_CAM_DATA9                                   0x0058 0x0208 0x04b4 0x02 0x00
+#define MX91_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14                                 0x0058 0x0208 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO18__LPSPI5_PCS0                                          0x0058 0x0208 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO18__LPSPI4_PCS0                                          0x0058 0x0208 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO18__TPM5_CH2                                             0x0058 0x0208 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO18__FLEXIO1_FLEXIO18                                     0x0058 0x0208 0x03b0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO19__GPIO2_IO19                                           0x005c 0x020c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO19__SAI3_RX_SYNC                                         0x005c 0x020c 0x04dc 0x01 0x01
+#define MX91_PAD_GPIO_IO19__PDM_BIT_STREAM3                                      0x005c 0x020c 0x04d0 0x02 0x01
+#define MX91_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15                                 0x005c 0x020c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO19__LPSPI5_SIN                                           0x005c 0x020c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO19__LPSPI4_SIN                                           0x005c 0x020c 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO19__TPM6_CH2                                             0x005c 0x020c 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO19__SAI3_TX_DATA0                                        0x005c 0x020c 0x0000 0x07 0x00
+
+#define MX91_PAD_GPIO_IO20__GPIO2_IO20                                           0x0060 0x0210 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO20__SAI3_RX_DATA0                                        0x0060 0x0210 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO20__PDM_BIT_STREAM0                                      0x0060 0x0210 0x04c4 0x02 0x01
+#define MX91_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16                                 0x0060 0x0210 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO20__LPSPI5_SOUT                                          0x0060 0x0210 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO20__LPSPI4_SOUT                                          0x0060 0x0210 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO20__TPM3_CH1                                             0x0060 0x0210 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO20__FLEXIO1_FLEXIO20                                     0x0060 0x0210 0x03b4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO21__GPIO2_IO21                                           0x0064 0x0214 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO21__SAI3_TX_DATA0                                        0x0064 0x0214 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO21__PDM_CLK                                              0x0064 0x0214 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17                                 0x0064 0x0214 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO21__LPSPI5_SCK                                           0x0064 0x0214 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO21__LPSPI4_SCK                                           0x0064 0x0214 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO21__TPM4_CH1                                             0x0064 0x0214 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO21__SAI3_RX_BCLK                                         0x0064 0x0214 0x04d8 0x07 0x01
+
+#define MX91_PAD_GPIO_IO22__GPIO2_IO22                                           0x0068 0x0218 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO22__USDHC3_CLK                                           0x0068 0x0218 0x04e8 0x01 0x00
+#define MX91_PAD_GPIO_IO22__SPDIF_IN                                             0x0068 0x0218 0x04e4 0x02 0x00
+#define MX91_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18                                 0x0068 0x0218 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO22__TPM5_CH1                                             0x0068 0x0218 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO22__TPM6_EXTCLK                                          0x0068 0x0218 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO22__LPI2C5_SDA                                           0x0068 0x0218 0x0404 0x06 0x01
+#define MX91_PAD_GPIO_IO22__FLEXIO1_FLEXIO22                                     0x0068 0x0218 0x03b8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO23__GPIO2_IO23                                           0x006c 0x021c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO23__USDHC3_CMD                                           0x006c 0x021c 0x04ec 0x01 0x00
+#define MX91_PAD_GPIO_IO23__SPDIF_OUT                                            0x006c 0x021c 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19                                 0x006c 0x021c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO23__TPM6_CH1                                             0x006c 0x021c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO23__LPI2C5_SCL                                           0x006c 0x021c 0x0400 0x06 0x01
+#define MX91_PAD_GPIO_IO23__FLEXIO1_FLEXIO23                                     0x006c 0x021c 0x03bc 0x07 0x00
+
+#define MX91_PAD_GPIO_IO24__GPIO2_IO24                                           0x0070 0x0220 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO24__USDHC3_DATA0                                         0x0070 0x0220 0x04f0 0x01 0x00
+#define MX91_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20                                 0x0070 0x0220 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO24__TPM3_CH3                                             0x0070 0x0220 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO24__JTAG_MUX_TDO                                         0x0070 0x0220 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO24__LPSPI6_PCS1                                          0x0070 0x0220 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO24__FLEXIO1_FLEXIO24                                     0x0070 0x0220 0x03c0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO25__GPIO2_IO25                                           0x0074 0x0224 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO25__USDHC3_DATA1                                         0x0074 0x0224 0x04f4 0x01 0x00
+#define MX91_PAD_GPIO_IO25__CAN2_TX                                              0x0074 0x0224 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21                                 0x0074 0x0224 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO25__TPM4_CH3                                             0x0074 0x0224 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO25__JTAG_MUX_TCK                                         0x0074 0x0224 0x03d4 0x05 0x01
+#define MX91_PAD_GPIO_IO25__LPSPI7_PCS1                                          0x0074 0x0224 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO25__FLEXIO1_FLEXIO25                                     0x0074 0x0224 0x03c4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO26__GPIO2_IO26                                           0x0078 0x0228 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO26__USDHC3_DATA2                                         0x0078 0x0228 0x04f8 0x01 0x00
+#define MX91_PAD_GPIO_IO26__PDM_BIT_STREAM1                                      0x0078 0x0228 0x04c8 0x02 0x01
+#define MX91_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22                                 0x0078 0x0228 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO26__TPM5_CH3                                             0x0078 0x0228 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO26__JTAG_MUX_TDI                                         0x0078 0x0228 0x03d8 0x05 0x01
+#define MX91_PAD_GPIO_IO26__LPSPI8_PCS1                                          0x0078 0x0228 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO26__SAI3_TX_SYNC                                         0x0078 0x0228 0x04e0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO27__GPIO2_IO27                                           0x007c 0x022c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO27__USDHC3_DATA3                                         0x007c 0x022c 0x04fc 0x01 0x00
+#define MX91_PAD_GPIO_IO27__CAN2_RX                                              0x007c 0x022c 0x0364 0x02 0x01
+#define MX91_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23                                 0x007c 0x022c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO27__TPM6_CH3                                             0x007c 0x022c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO27__JTAG_MUX_TMS                                         0x007c 0x022c 0x03dc 0x05 0x01
+#define MX91_PAD_GPIO_IO27__LPSPI5_PCS1                                          0x007c 0x022c 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO27__FLEXIO1_FLEXIO27                                     0x007c 0x022c 0x03c8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO28__GPIO2_IO28                                           0x0080 0x0230 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO28__LPI2C3_SDA                                           0x0080 0x0230 0x03f4 0x01 0x01
+#define MX91_PAD_GPIO_IO28__CAN1_TX                                              0x0080 0x0230 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO28__FLEXIO1_FLEXIO28                                     0x0080 0x0230 0x0000 0x07 0x00
+
+#define MX91_PAD_GPIO_IO29__GPIO2_IO29                                           0x0084 0x0234 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO29__LPI2C3_SCL                                           0x0084 0x0234 0x03f0 0x01 0x01
+#define MX91_PAD_GPIO_IO29__CAN1_RX                                              0x0084 0x0234 0x0360 0x02 0x00
+#define MX91_PAD_GPIO_IO29__FLEXIO1_FLEXIO29                                     0x0084 0x0234 0x0000 0x07 0x00
+
+#define MX91_PAD_CCM_CLKO1__CCMSRCGPCMIX_CLKO1                                   0x0088 0x0238 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO1__FLEXIO1_FLEXIO26                                     0x0088 0x0238 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO1__GPIO3_IO26                                           0x0088 0x0238 0x0000 0x05 0x00
+
+#define MX91_PAD_CCM_CLKO2__GPIO3_IO27                                           0x008c 0x023c 0x0000 0x05 0x00
+#define MX91_PAD_CCM_CLKO2__CCMSRCGPCMIX_CLKO2                                   0x008c 0x023c 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO2__FLEXIO1_FLEXIO27                                     0x008c 0x023c 0x03c8 0x04 0x01
+
+#define MX91_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3                                   0x0090 0x0240 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO3__FLEXIO2_FLEXIO28                                     0x0090 0x0240 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO3__GPIO4_IO28                                           0x0090 0x0240 0x0000 0x05 0x00
+
+#define MX91_PAD_CCM_CLKO4__CCMSRCGPCMIX_CLKO4                                   0x0094 0x0244 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO4__FLEXIO2_FLEXIO29                                     0x0094 0x0244 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO4__GPIO4_IO29                                           0x0094 0x0244 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_MDC__ENET1_MDC                                            0x0098 0x0248 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_MDC__LPUART3_DCB_B                                        0x0098 0x0248 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_MDC__I3C2_SCL                                             0x0098 0x0248 0x03cc 0x02 0x00
+#define MX91_PAD_ENET1_MDC__HSIOMIX_OTG_ID1                                      0x0098 0x0248 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_MDC__FLEXIO2_FLEXIO0                                      0x0098 0x0248 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_MDC__GPIO4_IO0                                            0x0098 0x0248 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_MDC__LPI2C1_SCL                                           0x0098 0x0248 0x03e0 0x06 0x00
+
+#define MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO                                       0x009c 0x024c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_MDIO__LPUART3_RIN_B                                       0x009c 0x024c 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_MDIO__I3C2_SDA                                            0x009c 0x024c 0x03d0 0x02 0x00
+#define MX91_PAD_ENET1_MDIO__HSIOMIX_OTG_PWR1                                    0x009c 0x024c 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_MDIO__FLEXIO2_FLEXIO1                                     0x009c 0x024c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_MDIO__GPIO4_IO1                                           0x009c 0x024c 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_MDIO__LPI2C1_SDA                                          0x009c 0x024c 0x03e4 0x06 0x00
+
+#define MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3                                   0x00a0 0x0250 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD3__CAN2_TX                                              0x00a0 0x0250 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_TD3__HSIOMIX_OTG_ID2                                      0x00a0 0x0250 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD3__FLEXIO2_FLEXIO2                                      0x00a0 0x0250 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD3__GPIO4_IO2                                            0x00a0 0x0250 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD3__LPI2C2_SCL                                           0x00a0 0x0250 0x03e8 0x06 0x00
+
+#define MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2                                   0x00a4 0x0254 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD2__ENET_QOS_CLOCK_GENERATE_CLK                          0x00a4 0x0254 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TD2__CAN2_RX                                              0x00a4 0x0254 0x0364 0x02 0x02
+#define MX91_PAD_ENET1_TD2__HSIOMIX_OTG_OC2                                      0x00a4 0x0254 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD2__FLEXIO2_FLEXIO3                                      0x00a4 0x0254 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD2__GPIO4_IO3                                            0x00a4 0x0254 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD2__LPI2C2_SDA                                           0x00a4 0x0254 0x03ec 0x06 0x00
+
+#define MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1                                      0x00a8 0x0258 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD1__LPUART3_RTS_B                                        0x00a8 0x0258 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TD1__I3C2_PUR                                             0x00a8 0x0258 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_TD1__HSIOMIX_OTG_OC1                                      0x00a8 0x0258 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD1__FLEXIO2_FLEXIO4                                      0x00a8 0x0258 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD1__GPIO4_IO4                                            0x00a8 0x0258 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD1__I3C2_PUR_B                                           0x00a8 0x0258 0x0000 0x06 0x00
+
+#define MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0                                   0x00ac 0x025c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD0__LPUART3_TX                                           0x00ac 0x025c 0x0474 0x01 0x01
+#define MX91_PAD_ENET1_TD0__FLEXIO2_FLEXIO5                                      0x00ac 0x025c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD0__GPIO4_IO5                                            0x00ac 0x025c 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL                             0x00b0 0x0260 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TX_CTL__LPUART3_DTR_B                                     0x00b0 0x0260 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO6                                   0x00b0 0x0260 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TX_CTL__GPIO4_IO6                                         0x00b0 0x0260 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TX_CTL__LPSPI2_SCK                                        0x00b0 0x0260 0x043c 0x02 0x00
+
+#define MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK                   0x00b4 0x0264 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TXC__ENET_QOS_TX_ER                                       0x00b4 0x0264 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TXC__FLEXIO2_FLEXIO7                                      0x00b4 0x0264 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TXC__GPIO4_IO7                                            0x00b4 0x0264 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TXC__LPSPI2_SIN                                           0x00b4 0x0264 0x0440 0x02 0x00
+
+#define MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL                             0x00b8 0x0268 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RX_CTL__LPUART3_DSR_B                                     0x00b8 0x0268 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_RX_CTL__HSIOMIX_OTG_PWR2                                  0x00b8 0x0268 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO8                                   0x00b8 0x0268 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RX_CTL__GPIO4_IO8                                         0x00b8 0x0268 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_RX_CTL__LPSPI2_PCS0                                       0x00b8 0x0268 0x0434 0x02 0x00
+
+#define MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC                                   0x00bc 0x026c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RXC__ENET_QOS_RX_ER                                       0x00bc 0x026c 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_RXC__FLEXIO2_FLEXIO9                                      0x00bc 0x026c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RXC__GPIO4_IO9                                            0x00bc 0x026c 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_RXC__LPSPI2_SOUT                                          0x00bc 0x026c 0x0444 0x02 0x00
+
+#define MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0                                   0x00c0 0x0270 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD0__LPUART3_RX                                           0x00c0 0x0270 0x0470 0x01 0x01
+#define MX91_PAD_ENET1_RD0__FLEXIO2_FLEXIO10                                     0x00c0 0x0270 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD0__GPIO4_IO10                                           0x00c0 0x0270 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1                                   0x00c4 0x0274 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD1__LPUART3_CTS_B                                        0x00c4 0x0274 0x046c 0x01 0x01
+#define MX91_PAD_ENET1_RD1__LPTMR2_ALT1                                          0x00c4 0x0274 0x0448 0x03 0x00
+#define MX91_PAD_ENET1_RD1__FLEXIO2_FLEXIO11                                     0x00c4 0x0274 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD1__GPIO4_IO11                                           0x00c4 0x0274 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2                                   0x00c8 0x0278 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD2__LPTMR2_ALT2                                          0x00c8 0x0278 0x044c 0x03 0x00
+#define MX91_PAD_ENET1_RD2__FLEXIO2_FLEXIO12                                     0x00c8 0x0278 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD2__GPIO4_IO12                                           0x00c8 0x0278 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3                                   0x00cc 0x027c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD3__FLEXSPI1_TESTER_TRIGGER                              0x00cc 0x027c 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_RD3__LPTMR2_ALT3                                          0x00cc 0x027c 0x0450 0x03 0x00
+#define MX91_PAD_ENET1_RD3__FLEXIO2_FLEXIO13                                     0x00cc 0x027c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD3__GPIO4_IO13                                           0x00cc 0x027c 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET2_MDC__ENET2_MDC                                            0x00d0 0x0280 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_MDC__LPUART4_DCB_B                                        0x00d0 0x0280 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_MDC__SAI2_RX_SYNC                                         0x00d0 0x0280 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_MDC__FLEXIO2_FLEXIO14                                     0x00d0 0x0280 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_MDC__GPIO4_IO14                                           0x00d0 0x0280 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_MDC__MEDIAMIX_CAM_CLK                                     0x00d0 0x0280 0x04bc 0x06 0x01
+
+#define MX91_PAD_ENET2_MDIO__ENET2_MDIO                                          0x00d4 0x0284 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_MDIO__LPUART4_RIN_B                                       0x00d4 0x0284 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_MDIO__SAI2_RX_BCLK                                        0x00d4 0x0284 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_MDIO__FLEXIO2_FLEXIO15                                    0x00d4 0x0284 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_MDIO__GPIO4_IO15                                          0x00d4 0x0284 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_MDIO__MEDIAMIX_CAM_DATA0                                  0x00d4 0x0284 0x0490 0x06 0x01
+
+#define MX91_PAD_ENET2_TD3__SAI2_RX_DATA0                                        0x00d8 0x0288 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TD3__FLEXIO2_FLEXIO16                                     0x00d8 0x0288 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD3__GPIO4_IO16                                           0x00d8 0x0288 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD3__MEDIAMIX_CAM_VSYNC                                   0x00d8 0x0288 0x04c0 0x06 0x01
+#define MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3                                      0x00d8 0x0288 0x0000 0x00 0x00
+
+#define MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2                                      0x00dc 0x028c 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD2__ENET2_TX_CLK2                                        0x00dc 0x028c 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TD2__FLEXIO2_FLEXIO17                                     0x00dc 0x028c 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD2__GPIO4_IO17                                           0x00dc 0x028c 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD2__MEDIAMIX_CAM_HSYNC                                   0x00dc 0x028c 0x04b8 0x06 0x01
+
+#define MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1                                      0x00e0 0x0290 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD1__LPUART4_RTS_B                                        0x00e0 0x0290 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TD1__FLEXIO2_FLEXIO18                                     0x00e0 0x0290 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD1__GPIO4_IO18                                           0x00e0 0x0290 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD1__MEDIAMIX_CAM_DATA1                                   0x00e0 0x0290 0x0494 0x06 0x01
+
+#define MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0                                      0x00e4 0x0294 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD0__LPUART4_TX                                           0x00e4 0x0294 0x0480 0x01 0x01
+#define MX91_PAD_ENET2_TD0__FLEXIO2_FLEXIO19                                     0x00e4 0x0294 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD0__GPIO4_IO19                                           0x00e4 0x0294 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD0__MEDIAMIX_CAM_DATA2                                   0x00e4 0x0294 0x0498 0x06 0x01
+
+#define MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL                                0x00e8 0x0298 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TX_CTL__LPUART4_DTR_B                                     0x00e8 0x0298 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TX_CTL__SAI2_TX_SYNC                                      0x00e8 0x0298 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO20                                  0x00e8 0x0298 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TX_CTL__GPIO4_IO20                                        0x00e8 0x0298 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TX_CTL__MEDIAMIX_CAM_DATA3                                0x00e8 0x0298 0x049c 0x06 0x01
+
+#define MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC                                      0x00ec 0x029c 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TXC__ENET2_TX_ER                                          0x00ec 0x029c 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TXC__SAI2_TX_BCLK                                         0x00ec 0x029c 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TXC__FLEXIO2_FLEXIO21                                     0x00ec 0x029c 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TXC__GPIO4_IO21                                           0x00ec 0x029c 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TXC__MEDIAMIX_CAM_DATA4                                   0x00ec 0x029c 0x04a0 0x06 0x01
+
+#define MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL                                0x00f0 0x02a0 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RX_CTL__LPUART4_DSR_B                                     0x00f0 0x02a0 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RX_CTL__SAI2_TX_DATA0                                     0x00f0 0x02a0 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO22                                  0x00f0 0x02a0 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RX_CTL__GPIO4_IO22                                        0x00f0 0x02a0 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RX_CTL__MEDIAMIX_CAM_DATA5                                0x00f0 0x02a0 0x04a4 0x06 0x01
+
+#define MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC                                      0x00f4 0x02a4 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RXC__ENET2_RX_ER                                          0x00f4 0x02a4 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RXC__FLEXIO2_FLEXIO23                                     0x00f4 0x02a4 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RXC__GPIO4_IO23                                           0x00f4 0x02a4 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RXC__MEDIAMIX_CAM_DATA6                                   0x00f4 0x02a4 0x04a8 0x06 0x01
+
+#define MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0                                      0x00f8 0x02a8 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD0__LPUART4_RX                                           0x00f8 0x02a8 0x047c 0x01 0x01
+#define MX91_PAD_ENET2_RD0__FLEXIO2_FLEXIO24                                     0x00f8 0x02a8 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD0__GPIO4_IO24                                           0x00f8 0x02a8 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD0__MEDIAMIX_CAM_DATA7                                   0x00f8 0x02a8 0x04ac 0x06 0x01
+
+#define MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1                                      0x00fc 0x02ac 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD1__SPDIF_IN                                             0x00fc 0x02ac 0x04e4 0x01 0x01
+#define MX91_PAD_ENET2_RD1__FLEXIO2_FLEXIO25                                     0x00fc 0x02ac 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD1__GPIO4_IO25                                           0x00fc 0x02ac 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD1__MEDIAMIX_CAM_DATA8                                   0x00fc 0x02ac 0x04b0 0x06 0x01
+
+#define MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2                                      0x0100 0x02b0 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD2__LPUART4_CTS_B                                        0x0100 0x02b0 0x0478 0x01 0x01
+#define MX91_PAD_ENET2_RD2__SAI2_MCLK                                            0x0100 0x02b0 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_RD2__MQS2_RIGHT                                           0x0100 0x02b0 0x0000 0x03 0x00
+#define MX91_PAD_ENET2_RD2__FLEXIO2_FLEXIO26                                     0x0100 0x02b0 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD2__GPIO4_IO26                                           0x0100 0x02b0 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD2__MEDIAMIX_CAM_DATA9                                   0x0100 0x02b0 0x04b4 0x06 0x01
+
+#define MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3                                      0x0104 0x02b4 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD3__SPDIF_OUT                                            0x0104 0x02b4 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RD3__SPDIF_IN                                             0x0104 0x02b4 0x04e4 0x02 0x02
+#define MX91_PAD_ENET2_RD3__MQS2_LEFT                                            0x0104 0x02b4 0x0000 0x03 0x00
+#define MX91_PAD_ENET2_RD3__FLEXIO2_FLEXIO27                                     0x0104 0x02b4 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD3__GPIO4_IO27                                           0x0104 0x02b4 0x0000 0x05 0x00
+
+#define MX91_PAD_SD1_CLK__FLEXIO1_FLEXIO8                                        0x0108 0x02b8 0x038c 0x04 0x01
+#define MX91_PAD_SD1_CLK__GPIO3_IO8                                              0x0108 0x02b8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_CLK__USDHC1_CLK                                             0x0108 0x02b8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_CLK__LPSPI2_SCK                                             0x0108 0x02b8 0x043c 0x03 0x01
+
+#define MX91_PAD_SD1_CMD__USDHC1_CMD                                             0x010c 0x02bc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_CMD__FLEXIO1_FLEXIO9                                        0x010c 0x02bc 0x0390 0x04 0x01
+#define MX91_PAD_SD1_CMD__GPIO3_IO9                                              0x010c 0x02bc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_CMD__LPSPI2_SIN                                             0x010c 0x02bc 0x0440 0x03 0x01
+
+#define MX91_PAD_SD1_DATA0__USDHC1_DATA0                                         0x0110 0x02c0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA0__FLEXIO1_FLEXIO10                                     0x0110 0x02c0 0x0394 0x04 0x01
+#define MX91_PAD_SD1_DATA0__GPIO3_IO10                                           0x0110 0x02c0 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA0__LPSPI2_PCS0                                          0x0110 0x02c0 0x0434 0x03 0x01
+
+#define MX91_PAD_SD1_DATA1__USDHC1_DATA1                                         0x0114 0x02c4 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA1__FLEXIO1_FLEXIO11                                     0x0114 0x02c4 0x0398 0x04 0x01
+#define MX91_PAD_SD1_DATA1__GPIO3_IO11                                           0x0114 0x02c4 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA1__CCMSRCGPCMIX_INT_BOOT                                0x0114 0x02c4 0x0000 0x06 0x00
+#define MX91_PAD_SD1_DATA1__LPSPI2_SOUT                                          0x0114 0x02c4 0x0444 0x03 0x01
+
+#define MX91_PAD_SD1_DATA2__USDHC1_DATA2                                         0x0118 0x02c8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA2__FLEXIO1_FLEXIO12                                     0x0118 0x02c8 0x0000 0x04 0x00
+#define MX91_PAD_SD1_DATA2__GPIO3_IO12                                           0x0118 0x02c8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA2__CCMSRCGPCMIX_PMIC_READY                              0x0118 0x02c8 0x0000 0x06 0x00
+#define MX91_PAD_SD1_DATA2__LPSPI2_PCS1                                          0x0118 0x02c8 0x0438 0x03 0x00
+
+#define MX91_PAD_SD1_DATA3__USDHC1_DATA3                                         0x011c 0x02cc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B                                     0x011c 0x02cc 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA3__FLEXIO1_FLEXIO13                                     0x011c 0x02cc 0x039c 0x04 0x01
+#define MX91_PAD_SD1_DATA3__GPIO3_IO13                                           0x011c 0x02cc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA3__LPSPI1_PCS1                                          0x011c 0x02cc 0x0424 0x03 0x00
+
+#define MX91_PAD_SD1_DATA4__USDHC1_DATA4                                         0x0120 0x02d0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA4__FLEXSPI1_A_DATA4                                     0x0120 0x02d0 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA4__FLEXIO1_FLEXIO14                                     0x0120 0x02d0 0x03a0 0x04 0x01
+#define MX91_PAD_SD1_DATA4__GPIO3_IO14                                           0x0120 0x02d0 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA4__LPSPI1_PCS0                                          0x0120 0x02d0 0x0420 0x03 0x00
+
+#define MX91_PAD_SD1_DATA5__USDHC1_DATA5                                         0x0124 0x02d4 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA5__FLEXSPI1_A_DATA5                                     0x0124 0x02d4 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA5__USDHC1_RESET_B                                       0x0124 0x02d4 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA5__FLEXIO1_FLEXIO15                                     0x0124 0x02d4 0x03a4 0x04 0x01
+#define MX91_PAD_SD1_DATA5__GPIO3_IO15                                           0x0124 0x02d4 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA5__LPSPI1_SIN                                           0x0124 0x02d4 0x042c 0x03 0x00
+
+#define MX91_PAD_SD1_DATA6__USDHC1_DATA6                                         0x0128 0x02d8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA6__FLEXSPI1_A_DATA6                                     0x0128 0x02d8 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA6__USDHC1_CD_B                                          0x0128 0x02d8 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA6__FLEXIO1_FLEXIO16                                     0x0128 0x02d8 0x03a8 0x04 0x01
+#define MX91_PAD_SD1_DATA6__GPIO3_IO16                                           0x0128 0x02d8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA6__LPSPI1_SCK                                           0x0128 0x02d8 0x0428 0x03 0x00
+
+#define MX91_PAD_SD1_DATA7__USDHC1_DATA7                                         0x012c 0x02dc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA7__FLEXSPI1_A_DATA7                                     0x012c 0x02dc 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA7__USDHC1_WP                                            0x012c 0x02dc 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA7__FLEXIO1_FLEXIO17                                     0x012c 0x02dc 0x03ac 0x04 0x01
+#define MX91_PAD_SD1_DATA7__GPIO3_IO17                                           0x012c 0x02dc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA7__LPSPI1_SOUT                                          0x012c 0x02dc 0x0430 0x03 0x00
+
+#define MX91_PAD_SD1_STROBE__USDHC1_STROBE                                       0x0130 0x02e0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_STROBE__FLEXSPI1_A_DQS                                      0x0130 0x02e0 0x0000 0x01 0x00
+#define MX91_PAD_SD1_STROBE__FLEXIO1_FLEXIO18                                    0x0130 0x02e0 0x03b0 0x04 0x01
+#define MX91_PAD_SD1_STROBE__GPIO3_IO18                                          0x0130 0x02e0 0x0000 0x05 0x00
+
+#define MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                                     0x0134 0x02e4 0x0000 0x00 0x00
+#define MX91_PAD_SD2_VSELECT__USDHC2_WP                                          0x0134 0x02e4 0x0000 0x01 0x00
+#define MX91_PAD_SD2_VSELECT__LPTMR2_ALT3                                        0x0134 0x02e4 0x0450 0x02 0x01
+#define MX91_PAD_SD2_VSELECT__FLEXIO1_FLEXIO19                                   0x0134 0x02e4 0x0000 0x04 0x00
+#define MX91_PAD_SD2_VSELECT__GPIO3_IO19                                         0x0134 0x02e4 0x0000 0x05 0x00
+#define MX91_PAD_SD2_VSELECT__CCMSRCGPCMIX_EXT_CLK1                              0x0134 0x02e4 0x0368 0x06 0x00
+
+#define MX91_PAD_SD3_CLK__USDHC3_CLK                                             0x0138 0x02e8 0x04e8 0x00 0x01
+#define MX91_PAD_SD3_CLK__FLEXSPI1_A_SCLK                                        0x0138 0x02e8 0x0000 0x01 0x00
+#define MX91_PAD_SD3_CLK__LPUART1_CTS_B                                          0x0138 0x02e8 0x0454 0x02 0x00
+#define MX91_PAD_SD3_CLK__FLEXIO1_FLEXIO20                                       0x0138 0x02e8 0x03b4 0x04 0x01
+#define MX91_PAD_SD3_CLK__GPIO3_IO20                                             0x0138 0x02e8 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_CMD__USDHC3_CMD                                             0x013c 0x02ec 0x04ec 0x00 0x01
+#define MX91_PAD_SD3_CMD__FLEXSPI1_A_SS0_B                                       0x013c 0x02ec 0x0000 0x01 0x00
+#define MX91_PAD_SD3_CMD__LPUART1_RTS_B                                          0x013c 0x02ec 0x0000 0x02 0x00
+#define MX91_PAD_SD3_CMD__FLEXIO1_FLEXIO21                                       0x013c 0x02ec 0x0000 0x04 0x00
+#define MX91_PAD_SD3_CMD__GPIO3_IO21                                             0x013c 0x02ec 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA0__USDHC3_DATA0                                         0x0140 0x02f0 0x04f0 0x00 0x01
+#define MX91_PAD_SD3_DATA0__FLEXSPI1_A_DATA0                                     0x0140 0x02f0 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA0__LPUART2_CTS_B                                        0x0140 0x02f0 0x0460 0x02 0x00
+#define MX91_PAD_SD3_DATA0__FLEXIO1_FLEXIO22                                     0x0140 0x02f0 0x03b8 0x04 0x01
+#define MX91_PAD_SD3_DATA0__GPIO3_IO22                                           0x0140 0x02f0 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA1__USDHC3_DATA1                                         0x0144 0x02f4 0x04f4 0x00 0x01
+#define MX91_PAD_SD3_DATA1__FLEXSPI1_A_DATA1                                     0x0144 0x02f4 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA1__LPUART2_RTS_B                                        0x0144 0x02f4 0x0000 0x02 0x00
+#define MX91_PAD_SD3_DATA1__FLEXIO1_FLEXIO23                                     0x0144 0x02f4 0x03bc 0x04 0x01
+#define MX91_PAD_SD3_DATA1__GPIO3_IO23                                           0x0144 0x02f4 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA2__USDHC3_DATA2                                         0x0148 0x02f8 0x04f8 0x00 0x01
+#define MX91_PAD_SD3_DATA2__LPI2C4_SDA                                           0x0148 0x02f8 0x03fc 0x02 0x01
+#define MX91_PAD_SD3_DATA2__FLEXSPI1_A_DATA2                                     0x0148 0x02f8 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA2__FLEXIO1_FLEXIO24                                     0x0148 0x02f8 0x03c0 0x04 0x01
+#define MX91_PAD_SD3_DATA2__GPIO3_IO24                                           0x0148 0x02f8 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA3__USDHC3_DATA3                                         0x014c 0x02fc 0x04fc 0x00 0x01
+#define MX91_PAD_SD3_DATA3__FLEXSPI1_A_DATA3                                     0x014c 0x02fc 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA3__LPI2C4_SCL                                           0x014c 0x02fc 0x03f8 0x02 0x01
+#define MX91_PAD_SD3_DATA3__FLEXIO1_FLEXIO25                                     0x014c 0x02fc 0x03c4 0x04 0x01
+#define MX91_PAD_SD3_DATA3__GPIO3_IO25                                           0x014c 0x02fc 0x0000 0x05 0x00
+
+#define MX91_PAD_SD2_CD_B__USDHC2_CD_B                                           0x0150 0x0300 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CD_B__ENET_QOS_1588_EVENT0_IN                               0x0150 0x0300 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CD_B__I3C2_SCL                                              0x0150 0x0300 0x03cc 0x02 0x01
+#define MX91_PAD_SD2_CD_B__FLEXIO1_FLEXIO0                                       0x0150 0x0300 0x036c 0x04 0x01
+#define MX91_PAD_SD2_CD_B__GPIO3_IO0                                             0x0150 0x0300 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CD_B__LPI2C1_SCL                                            0x0150 0x0300 0x03e0 0x03 0x01
+
+#define MX91_PAD_SD2_CLK__USDHC2_CLK                                             0x0154 0x0304 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CLK__ENET_QOS_1588_EVENT0_OUT                               0x0154 0x0304 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CLK__I2C1_SDA                                               0x0154 0x0304 0x0000 0x03 0x00
+#define MX91_PAD_SD2_CLK__I3C2_SDA                                               0x0154 0x0304 0x03d0 0x02 0x01
+#define MX91_PAD_SD2_CLK__FLEXIO1_FLEXIO1                                        0x0154 0x0304 0x0370 0x04 0x01
+#define MX91_PAD_SD2_CLK__GPIO3_IO1                                              0x0154 0x0304 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CLK__CCMSRCGPCMIX_OBSERVE0                                  0x0154 0x0304 0x0000 0x06 0x00
+#define MX91_PAD_SD2_CLK__LPI2C1_SDA                                             0x0154 0x0304 0x03e4 0x03 0x01
+
+#define MX91_PAD_SD2_CMD__USDHC2_CMD                                             0x0158 0x0308 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CMD__ENET2_1588_EVENT0_IN                                   0x0158 0x0308 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CMD__I3C2_PUR                                               0x0158 0x0308 0x0000 0x02 0x00
+#define MX91_PAD_SD2_CMD__I3C2_PUR_B                                             0x0158 0x0308 0x0000 0x03 0x00
+#define MX91_PAD_SD2_CMD__FLEXIO1_FLEXIO2                                        0x0158 0x0308 0x0374 0x04 0x01
+#define MX91_PAD_SD2_CMD__GPIO3_IO2                                              0x0158 0x0308 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CMD__CCMSRCGPCMIX_OBSERVE1                                  0x0158 0x0308 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA0__USDHC2_DATA0                                         0x015c 0x030c 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA0__ENET2_1588_EVENT0_OUT                                0x015c 0x030c 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA0__CAN2_TX                                              0x015c 0x030c 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA0__FLEXIO1_FLEXIO3                                      0x015c 0x030c 0x0378 0x04 0x01
+#define MX91_PAD_SD2_DATA0__GPIO3_IO3                                            0x015c 0x030c 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA0__LPUART1_TX                                           0x015c 0x030c 0x045c 0x03 0x00
+#define MX91_PAD_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2                                0x015c 0x030c 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA1__USDHC2_DATA1                                         0x0160 0x0310 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA1__ENET2_1588_EVENT1_IN                                 0x0160 0x0310 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA1__CAN2_RX                                              0x0160 0x0310 0x0364 0x02 0x03
+#define MX91_PAD_SD2_DATA1__FLEXIO1_FLEXIO4                                      0x0160 0x0310 0x037c 0x04 0x01
+#define MX91_PAD_SD2_DATA1__GPIO3_IO4                                            0x0160 0x0310 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA1__LPUART1_RX                                           0x0160 0x0310 0x0458 0x03 0x00
+#define MX91_PAD_SD2_DATA1__CCMSRCGPCMIX_WAIT                                    0x0160 0x0310 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA2__USDHC2_DATA2                                         0x0164 0x0314 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA2__ENET2_1588_EVENT1_OUT                                0x0164 0x0314 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA2__MQS2_RIGHT                                           0x0164 0x0314 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA2__FLEXIO1_FLEXIO5                                      0x0164 0x0314 0x0380 0x04 0x01
+#define MX91_PAD_SD2_DATA2__GPIO3_IO5                                            0x0164 0x0314 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA2__LPUART2_TX                                           0x0164 0x0314 0x0468 0x03 0x00
+#define MX91_PAD_SD2_DATA2__CCMSRCGPCMIX_STOP                                    0x0164 0x0314 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA3__USDHC2_DATA3                                         0x0168 0x0318 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA3__LPTMR2_ALT1                                          0x0168 0x0318 0x0448 0x01 0x01
+#define MX91_PAD_SD2_DATA3__MQS2_LEFT                                            0x0168 0x0318 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA3__FLEXIO1_FLEXIO6                                      0x0168 0x0318 0x0384 0x04 0x01
+#define MX91_PAD_SD2_DATA3__GPIO3_IO6                                            0x0168 0x0318 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA3__LPUART2_RX                                           0x0168 0x0318 0x0464 0x03 0x00
+#define MX91_PAD_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET                             0x0168 0x0318 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_RESET_B__USDHC2_RESET_B                                     0x016c 0x031c 0x0000 0x00 0x00
+#define MX91_PAD_SD2_RESET_B__LPTMR2_ALT2                                        0x016c 0x031c 0x044c 0x01 0x01
+#define MX91_PAD_SD2_RESET_B__FLEXIO1_FLEXIO7                                    0x016c 0x031c 0x0388 0x04 0x01
+#define MX91_PAD_SD2_RESET_B__GPIO3_IO7                                          0x016c 0x031c 0x0000 0x05 0x00
+#define MX91_PAD_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET                          0x016c 0x031c 0x0000 0x06 0x00
+
+#define MX91_PAD_I2C1_SCL__LPI2C1_SCL                                            0x0170 0x0320 0x03e0 0x00 0x02
+#define MX91_PAD_I2C1_SCL__I3C1_SCL                                              0x0170 0x0320 0x0000 0x01 0x00
+#define MX91_PAD_I2C1_SCL__LPUART1_DCB_B                                         0x0170 0x0320 0x0000 0x02 0x00
+#define MX91_PAD_I2C1_SCL__TPM2_CH0                                              0x0170 0x0320 0x0000 0x03 0x00
+#define MX91_PAD_I2C1_SCL__GPIO1_IO0                                             0x0170 0x0320 0x0000 0x05 0x00
+
+#define MX91_PAD_I2C1_SDA__LPI2C1_SDA                                            0x0174 0x0324 0x03e4 0x00 0x02
+#define MX91_PAD_I2C1_SDA__I3C1_SDA                                              0x0174 0x0324 0x0000 0x01 0x00
+#define MX91_PAD_I2C1_SDA__LPUART1_RIN_B                                         0x0174 0x0324 0x0000 0x02 0x00
+#define MX91_PAD_I2C1_SDA__TPM2_CH1                                              0x0174 0x0324 0x0000 0x03 0x00
+#define MX91_PAD_I2C1_SDA__GPIO1_IO1                                             0x0174 0x0324 0x0000 0x05 0x00
+
+#define MX91_PAD_I2C2_SCL__LPI2C2_SCL                                            0x0178 0x0328 0x03e8 0x00 0x01
+#define MX91_PAD_I2C2_SCL__I3C1_PUR                                              0x0178 0x0328 0x0000 0x01 0x00
+#define MX91_PAD_I2C2_SCL__LPUART2_DCB_B                                         0x0178 0x0328 0x0000 0x02 0x00
+#define MX91_PAD_I2C2_SCL__TPM2_CH2                                              0x0178 0x0328 0x0000 0x03 0x00
+#define MX91_PAD_I2C2_SCL__SAI1_RX_SYNC                                          0x0178 0x0328 0x0000 0x04 0x00
+#define MX91_PAD_I2C2_SCL__GPIO1_IO2                                             0x0178 0x0328 0x0000 0x05 0x00
+#define MX91_PAD_I2C2_SCL__I3C1_PUR_B                                            0x0178 0x0328 0x0000 0x06 0x00
+
+#define MX91_PAD_I2C2_SDA__LPI2C2_SDA                                            0x017c 0x032c 0x03ec 0x00 0x01
+#define MX91_PAD_I2C2_SDA__LPUART2_RIN_B                                         0x017c 0x032c 0x0000 0x02 0x00
+#define MX91_PAD_I2C2_SDA__TPM2_CH3                                              0x017c 0x032c 0x0000 0x03 0x00
+#define MX91_PAD_I2C2_SDA__SAI1_RX_BCLK                                          0x017c 0x032c 0x0000 0x04 0x00
+#define MX91_PAD_I2C2_SDA__GPIO1_IO3                                             0x017c 0x032c 0x0000 0x05 0x00
+
+#define MX91_PAD_UART1_RXD__LPUART1_RX                                           0x0180 0x0330 0x0458 0x00 0x01
+#define MX91_PAD_UART1_RXD__ELE_UART_RX                                          0x0180 0x0330 0x0000 0x01 0x00
+#define MX91_PAD_UART1_RXD__LPSPI2_SIN                                           0x0180 0x0330 0x0440 0x02 0x02
+#define MX91_PAD_UART1_RXD__TPM1_CH0                                             0x0180 0x0330 0x0000 0x03 0x00
+#define MX91_PAD_UART1_RXD__GPIO1_IO4                                            0x0180 0x0330 0x0000 0x05 0x00
+
+#define MX91_PAD_UART1_TXD__LPUART1_TX                                           0x0184 0x0334 0x045c 0x00 0x01
+#define MX91_PAD_UART1_TXD__ELE_UART_TX                                          0x0184 0x0334 0x0000 0x01 0x00
+#define MX91_PAD_UART1_TXD__LPSPI2_PCS0                                          0x0184 0x0334 0x0434 0x02 0x02
+#define MX91_PAD_UART1_TXD__TPM1_CH1                                             0x0184 0x0334 0x0000 0x03 0x00
+#define MX91_PAD_UART1_TXD__GPIO1_IO5                                            0x0184 0x0334 0x0000 0x05 0x00
+
+#define MX91_PAD_UART2_RXD__LPUART2_RX                                           0x0188 0x0338 0x0464 0x00 0x01
+#define MX91_PAD_UART2_RXD__LPUART1_CTS_B                                        0x0188 0x0338 0x0454 0x01 0x01
+#define MX91_PAD_UART2_RXD__LPSPI2_SOUT                                          0x0188 0x0338 0x0444 0x02 0x02
+#define MX91_PAD_UART2_RXD__TPM1_CH2                                             0x0188 0x0338 0x0000 0x03 0x00
+#define MX91_PAD_UART2_RXD__SAI1_MCLK                                            0x0188 0x0338 0x04d4 0x04 0x00
+#define MX91_PAD_UART2_RXD__GPIO1_IO6                                            0x0188 0x0338 0x0000 0x05 0x00
+
+#define MX91_PAD_UART2_TXD__LPUART2_TX                                           0x018c 0x033c 0x0468 0x00 0x01
+#define MX91_PAD_UART2_TXD__LPUART1_RTS_B                                        0x018c 0x033c 0x0000 0x01 0x00
+#define MX91_PAD_UART2_TXD__LPSPI2_SCK                                           0x018c 0x033c 0x043c 0x02 0x02
+#define MX91_PAD_UART2_TXD__TPM1_CH3                                             0x018c 0x033c 0x0000 0x03 0x00
+#define MX91_PAD_UART2_TXD__GPIO1_IO7                                            0x018c 0x033c 0x0000 0x05 0x00
+#define MX91_PAD_UART2_TXD__SAI3_TX_SYNC                                         0x018c 0x033c 0x04e0 0x07 0x02
+
+#define MX91_PAD_PDM_CLK__PDM_CLK                                                0x0190 0x0340 0x0000 0x00 0x00
+#define MX91_PAD_PDM_CLK__MQS1_LEFT                                              0x0190 0x0340 0x0000 0x01 0x00
+#define MX91_PAD_PDM_CLK__LPTMR1_ALT1                                            0x0190 0x0340 0x0000 0x04 0x00
+#define MX91_PAD_PDM_CLK__GPIO1_IO8                                              0x0190 0x0340 0x0000 0x05 0x00
+#define MX91_PAD_PDM_CLK__CAN1_TX                                                0x0190 0x0340 0x0000 0x06 0x00
+
+#define MX91_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0                                0x0194 0x0344 0x04c4 0x00 0x02
+#define MX91_PAD_PDM_BIT_STREAM0__MQS1_RIGHT                                     0x0194 0x0344 0x0000 0x01 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1                                    0x0194 0x0344 0x0424 0x02 0x01
+#define MX91_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK                                    0x0194 0x0344 0x0000 0x03 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__LPTMR1_ALT2                                    0x0194 0x0344 0x0000 0x04 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__GPIO1_IO9                                      0x0194 0x0344 0x0000 0x05 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__CAN1_RX                                        0x0194 0x0344 0x0360 0x06 0x01
+
+#define MX91_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1                                0x0198 0x0348 0x04c8 0x00 0x02
+#define MX91_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1                                    0x0198 0x0348 0x0438 0x02 0x01
+#define MX91_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK                                    0x0198 0x0348 0x0000 0x03 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__LPTMR1_ALT3                                    0x0198 0x0348 0x0000 0x04 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10                                     0x0198 0x0348 0x0000 0x05 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_EXT_CLK1                          0x0198 0x0348 0x0368 0x06 0x01
+
+#define MX91_PAD_SAI1_TXFS__SAI1_TX_SYNC                                         0x019c 0x034c 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXFS__SAI1_TX_DATA1                                        0x019c 0x034c 0x0000 0x01 0x00
+#define MX91_PAD_SAI1_TXFS__LPSPI1_PCS0                                          0x019c 0x034c 0x0420 0x02 0x01
+#define MX91_PAD_SAI1_TXFS__LPUART2_DTR_B                                        0x019c 0x034c 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXFS__MQS1_LEFT                                            0x019c 0x034c 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_TXFS__GPIO1_IO11                                           0x019c 0x034c 0x0000 0x05 0x00
+
+#define MX91_PAD_SAI1_TXC__SAI1_TX_BCLK                                          0x01a0 0x0350 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXC__LPUART2_CTS_B                                         0x01a0 0x0350 0x0460 0x01 0x01
+#define MX91_PAD_SAI1_TXC__LPSPI1_SIN                                            0x01a0 0x0350 0x042c 0x02 0x01
+#define MX91_PAD_SAI1_TXC__LPUART1_DSR_B                                         0x01a0 0x0350 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXC__CAN1_RX                                               0x01a0 0x0350 0x0360 0x04 0x02
+#define MX91_PAD_SAI1_TXC__GPIO1_IO12                                            0x01a0 0x0350 0x0000 0x05 0x00
+
+#define MX91_PAD_SAI1_TXD0__SAI1_TX_DATA0                                        0x01a4 0x0354 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXD0__LPUART2_RTS_B                                        0x01a4 0x0354 0x0000 0x01 0x00
+#define MX91_PAD_SAI1_TXD0__LPSPI1_SCK                                           0x01a4 0x0354 0x0428 0x02 0x01
+#define MX91_PAD_SAI1_TXD0__LPUART1_DTR_B                                        0x01a4 0x0354 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXD0__CAN1_TX                                              0x01a4 0x0354 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_TXD0__GPIO1_IO13                                           0x01a4 0x0354 0x0000 0x05 0x00
+#define MX91_PAD_SAI1_TXD0__SAI1_MCLK                                            0x01a4 0x0354 0x04d4 0x06 0x01
+
+#define MX91_PAD_SAI1_RXD0__SAI1_RX_DATA0                                        0x01a8 0x0358 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_RXD0__SAI1_MCLK                                            0x01a8 0x0358 0x04d4 0x01 0x02
+#define MX91_PAD_SAI1_RXD0__LPSPI1_SOUT                                          0x01a8 0x0358 0x0430 0x02 0x01
+#define MX91_PAD_SAI1_RXD0__LPUART2_DSR_B                                        0x01a8 0x0358 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_RXD0__MQS1_RIGHT                                           0x01a8 0x0358 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_RXD0__GPIO1_IO14                                           0x01a8 0x0358 0x0000 0x05 0x00
+
+#define MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY                                        0x01ac 0x035c 0x0000 0x00 0x00
+#define MX91_PAD_WDOG_ANY__GPIO1_IO15                                            0x01ac 0x035c 0x0000 0x05 0x00
+#endif /* __DTS_IMX91_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba91xxca.dts b/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba91xxca.dts
new file mode 100644
index 000000000000..5c430e6fca65
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba91xxca.dts
@@ -0,0 +1,739 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx91-tqma9131.dtsi"
+
+/{
+	model = "TQ-Systems i.MX91 TQMa91xxLA/TQMa91xxCA on MBa91xxCA starter kit";
+	compatible = "tq,imx91-tqma9131-mba91xxca", "tq,imx91-tqma9131", "fsl,imx91";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom0;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		rtc0 = &pcf85063;
+		rtc1 = &bbnsm_rtc;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm2 2 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	display: display {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+			};
+		};
+	};
+
+	fan0: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&expander2 4 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0 0>, <10000 1>;
+		fan-supply = <&reg_12v0>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+	};
+
+	lvds_encoder: lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+		powerdown-gpios = <&expander2 3 GPIO_ACTIVE_LOW>;
+		power-supply = <&reg_3v3>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+				};
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0_MB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_1v5: regulator-mpcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_MPCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_mpcie_3v3: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MPCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_fec>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "PMIC_IRQ#",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "USB_C_ALERT#", "BM2_LCD_INT#",
+		/* 12 */ "PEX_INT#", "", "RTC_EVENT#", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_jtag>;
+	gpio-line-names =
+		/* 00 */ "SD2_CD#", "", "", "",
+		/* 04 */ "", "", "", "SD2_RST#",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "ENET1_INT#", "ENET2_INT#",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	ptn5110: usb-typec@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "X17";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			typec-power-opmode = "default";
+			pd-disable;
+			self-powered;
+
+			port {
+				typec_con_hs: endpoint {
+					remote-endpoint = <&typec_hs>;
+				};
+			};
+		};
+	};
+
+	eeprom2: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander0: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pexp_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "TEMP_EVENT_MOD#", "MPCIE_WAKE#",
+				  "MPCIE_1V5_EN", "MPCIE_3V3_EN",
+				  "MPCIE_PERST#", "MPCIE_WDISABLE#",
+				  "BUTTON_A#", "BUTTON_B#";
+
+		temp-event-mod-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "TEMP_EVENT_MOD#";
+		};
+
+		mpcie-wake-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "MPCIE_WAKE#";
+		};
+
+		/*
+		 * Controls the mPCIE slot reset which is low active as
+		 * reset signal. The output-low states, the signal is
+		 * inactive, e.g. not in reset
+		 */
+		mpcie_rst_hog: mpcie-rst-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_PERST#";
+		};
+
+		/*
+		 * Controls the mPCIE slot WDISABLE pin which is low active
+		 * as disable signal. The output-low states, the signal is
+		 * inactive, e.g. not disabled
+		 */
+		mpcie_wdisable_hog: mpcie-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_WDISABLE#";
+		};
+	};
+
+	expander1: gpio@71 {
+		compatible = "nxp,pca9538";
+		reg = <0x71>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+				  "USB_RESET#", "",
+				  "WLAN_PD#", "WLAN_W_DISABLE#",
+				  "WLAN_PERST#", "12V_EN";
+
+		/*
+		 * Controls the WiFi card PD pin which is low active
+		 * as power down signal. The output-low states, the signal
+		 * is inactive, e.g. not power down
+		 */
+		wlan-pd-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PD#";
+		};
+
+		/*
+		 * Controls the WiFi card disable pin which is low active
+		 * as disable signal. The output-low states, the signal
+		 * is inactive, e.g. not disabled
+		 */
+		wlan-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_W_DISABLE#";
+		};
+
+		/*
+		 * Controls the WiFi card reset pin which is low active
+		 * as reset signal. The output-low states, the signal
+		 * is inactive, e.g. not in reset
+		 */
+		wlan-perst-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PERST#";
+		};
+	};
+
+	expander2: gpio@72 {
+		compatible = "nxp,pca9538";
+		reg = <0x72>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+				  "LCD_BLT_EN", "LVDS_SHDN#",
+				  "FAN_PWR_EN", "",
+				  "USER_LED1", "USER_LED2";
+	};
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&pcf85063 {
+	/* RTC_EVENT# from SoM is connected on mainboard */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&se97_som {
+	/* TEMP_EVENT# from SoM is connected on mainboard */
+	interrupt-parent = <&expander0>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&tpm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	status = "okay";
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	disable-over-current;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb424,2517";
+		reg = <1>;
+		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = /* PD | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET1_MDC__ENET1_MDC				0x51e>,
+			   /* SION | HYS | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO				0x4000111e>,
+			   /* HYS | FSEL_0 | DSE no drive */
+			   <MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x1000>,
+			   <MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x1000>,
+			   <MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x1000>,
+			   <MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x1000>,
+			   <MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x1000>,
+			   /* HYS | PD | FSEL_0 | DSE no drive */
+			   <MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC			0x1400>,
+			   /* PD | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x51e>,
+			   <MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1				0x51e>,
+			   <MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x51e>,
+			   <MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x51e>,
+			   <MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x51e>,
+			   /* PD | FSEL_3 | DSE X3 */
+			   <MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = /* HYS | FSEL_0 | DSE no drive */
+			   <MX91_PAD_CCM_CLKO1__GPIO3_IO26		0x1000>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = /* PD | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET2_MDC__ENET2_MDC		0x51e>,
+			   /* SION | HYS | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET2_MDIO__ENET2_MDIO		0x4000111e>,
+			   /* HYS | FSEL_0 | DSE no drive */
+			   <MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0		0x1000>,
+			   <MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1		0x1000>,
+			   <MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2		0x1000>,
+			   <MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3		0x1000>,
+			   <MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL	0x1000>,
+			   /* HYS | PD | FSEL_0 | DSE no drive */
+			   <MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC		0x1400>,
+			   /* PD | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0		0x51e>,
+			   <MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1		0x51e>,
+			   <MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2		0x51e>,
+			   <MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3		0x51e>,
+			   <MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL	0x51e>,
+			   /* PD | FSEL_3 | DSE X3 */
+			   <MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC		0x58e>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = /* HYS | FSEL_0 | DSE no drive */
+			   <MX91_PAD_CCM_CLKO2__GPIO3_IO27		0x1000>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = /* HYS | PU | FSEL_0 | DSE no drive */
+			   <MX91_PAD_PDM_BIT_STREAM0__CAN1_RX		0x1200>,
+			   /* PU | FSEL_3 | DSE X4 */
+			   <MX91_PAD_PDM_CLK__CAN1_TX			0x039e>;
+	};
+
+	pinctrl_jtag: jtaggrp {
+		fsl,pins = <MX91_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK	0x051e>,
+			   <MX91_PAD_DAP_TDI__JTAG_MUX_TDI		0x1200>,
+			   <MX91_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO	0x031e>,
+			   <MX91_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS	0x1200>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = /* SION | HYS | OD | FSEL_3 | DSE X4 */
+			   <MX91_PAD_GPIO_IO28__LPI2C3_SDA		0x4000199e>,
+			   <MX91_PAD_GPIO_IO29__LPI2C3_SCL		0x4000199e>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <MX91_PAD_SAI1_RXD0__GPIO1_IO14		0x1000>;
+	};
+
+	pinctrl_pexp_irq: pexpirqgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_SAI1_TXC__GPIO1_IO12		0x1000>;
+	};
+
+	pinctrl_rgbdisp: rgbdispgrp {
+		fsl,pins = <MX91_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK	0x31e>,
+			   <MX91_PAD_GPIO_IO01__MEDIAMIX_DISP_DE	0x31e>,
+			   <MX91_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC	0x31e>,
+			   <MX91_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC	0x31e>,
+			   <MX91_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA0	0x31e>,
+			   <MX91_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA1	0x31e>,
+			   <MX91_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA2	0x31e>,
+			   <MX91_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA3	0x31e>,
+			   <MX91_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA4	0x31e>,
+			   <MX91_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA5	0x31e>,
+			   <MX91_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA6	0x31e>,
+			   <MX91_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA7	0x31e>,
+			   <MX91_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA8	0x31e>,
+			   <MX91_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA9	0x31e>,
+			   <MX91_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10	0x31e>,
+			   <MX91_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11	0x31e>,
+			   <MX91_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12	0x31e>,
+			   <MX91_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13	0x31e>,
+			   <MX91_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14	0x31e>,
+			   <MX91_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15	0x31e>,
+			   <MX91_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16	0x31e>,
+			   <MX91_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17	0x31e>,
+			   <MX91_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18	0x31e>,
+			   <MX91_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19	0x31e>,
+			   <MX91_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20	0x31e>,
+			   <MX91_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21	0x31e>,
+			   <MX91_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22	0x31e>,
+			   <MX91_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23	0x31e>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_SAI1_TXFS__GPIO1_IO11		0x1000>;
+	};
+
+	pinctrl_tpm2: tpm2grp {
+		fsl,pins = <MX91_PAD_I2C2_SCL__TPM2_CH2			0x57e>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10	0x1000>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_UART1_RXD__LPUART1_RX		0x1000>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX91_PAD_UART1_TXD__LPUART1_TX		0x011e>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_UART2_RXD__LPUART2_RX		0x1000>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX91_PAD_UART2_TXD__LPUART2_TX		0x011e>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX91_PAD_SAI1_TXD0__LPUART2_RTS_B		0x011e>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_SD2_CD_B__GPIO3_IO0		0x1000>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_hs: usdhc2hsgrp {
+		fsl,pins = /* PD | FSEL_3 | DSE X5 */
+			   <MX91_PAD_SD2_CLK__USDHC2_CLK		0x05be>,
+			   /* HYS | PU | FSEL_3 | DSE X4 */
+			   <MX91_PAD_SD2_CMD__USDHC2_CMD		0x4000139e>,
+			   /* HYS | PU | FSEL_3 | DSE X3 */
+			   <MX91_PAD_SD2_DATA0__USDHC2_DATA0		0x4000138e>,
+			   <MX91_PAD_SD2_DATA1__USDHC2_DATA1		0x4000138e>,
+			   <MX91_PAD_SD2_DATA2__USDHC2_DATA2		0x4000138e>,
+			   <MX91_PAD_SD2_DATA3__USDHC2_DATA3		0x4000138e>,
+			   /* FSEL_2 | DSE X3 */
+			   <MX91_PAD_SD2_VSELECT__USDHC2_VSELECT	0x010e>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+		fsl,pins = /* PD | FSEL_3 | DSE X6 */
+			   <MX91_PAD_SD2_CLK__USDHC2_CLK		0x05fe>,
+			   /* HYS | PU | FSEL_3 | DSE X4 */
+			   <MX91_PAD_SD2_CMD__USDHC2_CMD		0x4000139e>,
+			   <MX91_PAD_SD2_DATA0__USDHC2_DATA0		0x4000139e>,
+			   <MX91_PAD_SD2_DATA1__USDHC2_DATA1		0x4000139e>,
+			   <MX91_PAD_SD2_DATA2__USDHC2_DATA2		0x4000139e>,
+			   <MX91_PAD_SD2_DATA3__USDHC2_DATA3		0x4000139e>,
+			   /* FSEL_2 | DSE X3 */
+			   <MX91_PAD_SD2_VSELECT__USDHC2_VSELECT	0x010e>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91-tqma9131.dtsi b/arch/arm64/boot/dts/freescale/imx91-tqma9131.dtsi
new file mode 100644
index 000000000000..5792952b7a8e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-tqma9131.dtsi
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+
+#include "imx91.dtsi"
+
+/{
+	model = "TQ-Systems i.MX91 TQMa91xxCA / TQMa91xxLA SOM";
+	compatible = "tq,imx91-tqma9131", "fsl,imx91";
+
+	memory@80000000 {
+		device_type = "memory";
+		/* our minimum RAM config will be 1024 MiB */
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* default CMA, must not exceed assembled memory */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+
+		/* EdgeLock secure enclave  */
+		ele_reserved: ele-reserved@a4120000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4120000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	/* SD2 RST# via PMIC SW_EN */
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&buck4>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	vref-supply = <&buck5>;
+};
+
+&flexspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		/*
+		 * no DQS, RXCLKSRC internal loop back, max 66 MHz
+		 * clk framework uses CLK_DIVIDER_ROUND_CLOSEST
+		 * selected value together with root from
+		 * IMX91_CLK_SYS_PLL_PFD1 @ 800.000.000 Hz helps to
+		 * respect the maximum value.
+		 */
+		spi-max-frequency = <62000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		vcc-supply = <&buck5>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	se97_som: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pca9451a: pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9451>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* V_0V8_SOC - hw developer guide: 0.75 .. 0.9 */
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_DDRQ - 1.1 V for LPDDR4 */
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_3V3 - EEPROM, RTC, ... */
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8 - SPI NOR, eMMC, RAM VDD1... */
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V1 - RAM VDD2*/
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_BBSM, fix 1.8 */
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V8_ANA */
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_SD2 - 3.3/1.8V USDHC2 io Voltage */
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+
+	eeprom0: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&buck4>;
+	};
+
+	eeprom1: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&buck4>;
+	};
+
+	/* protectable identification memory (part of M24C64-D @57) */
+	eeprom@5f {
+		compatible = "atmel,24c64d-wl";
+		reg = <0x5f>;
+		vcc-supply = <&buck4>;
+	};
+
+	accelerometer@6a {
+		compatible = "st,ism330dhcx";
+		reg = <0x6a>;
+		vdd-supply = <&buck4>;
+		vddio-supply = <&buck4>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi1: flexspi1grp {
+		fsl,pins = /* FSEL 3  | DSE X6 */
+			   <MX91_PAD_SD3_CMD__FLEXSPI1_A_SS0_B		0x01fe>,
+			   <MX91_PAD_SD3_CLK__FLEXSPI1_A_SCLK		0x01fe>,
+			   /* HYS | PU | FSEL 3  | DSE X6 */
+			   <MX91_PAD_SD3_DATA0__FLEXSPI1_A_DATA0	0x13fe>,
+			   <MX91_PAD_SD3_DATA1__FLEXSPI1_A_DATA1	0x13fe>,
+			   /* HYS | FSEL 3  | DSE X6 (external PU) */
+			   <MX91_PAD_SD3_DATA2__FLEXSPI1_A_DATA2	0x11fe>,
+			   <MX91_PAD_SD3_DATA3__FLEXSPI1_A_DATA3	0x11fe>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = /* SION | OD | FSEL 3 | DSE X4 */
+			   <MX91_PAD_I2C1_SCL__LPI2C1_SCL		0x4000199e>,
+			   <MX91_PAD_I2C1_SDA__LPI2C1_SDA		0x4000199e>;
+	};
+
+	pinctrl_pca9451: pca9451grp {
+		fsl,pins = /* HYS | PU */
+			   <MX91_PAD_I2C2_SDA__GPIO1_IO3		0x1200>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = /* FSEL 2 | DSE X2 */
+			   <MX91_PAD_SD2_RESET_B__GPIO3_IO7		0x106>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = /* PD | FSEL 3 | DSE X5 */
+			   <MX91_PAD_SD1_CLK__USDHC1_CLK		0x5be>,
+			   /* HYS | FSEL 0 | no drive */
+			   <MX91_PAD_SD1_STROBE__USDHC1_STROBE		0x1000>,
+			   /* HYS | FSEL 3 | X5 */
+			   <MX91_PAD_SD1_CMD__USDHC1_CMD		0x400011be>,
+			   /* HYS | FSEL 3 | X4 */
+			   <MX91_PAD_SD1_DATA0__USDHC1_DATA0		0x4000119e>,
+			   <MX91_PAD_SD1_DATA1__USDHC1_DATA1		0x4000119e>,
+			   <MX91_PAD_SD1_DATA2__USDHC1_DATA2		0x4000119e>,
+			   <MX91_PAD_SD1_DATA3__USDHC1_DATA3		0x4000119e>,
+			   <MX91_PAD_SD1_DATA4__USDHC1_DATA4		0x4000119e>,
+			   <MX91_PAD_SD1_DATA5__USDHC1_DATA5		0x4000119e>,
+			   <MX91_PAD_SD1_DATA6__USDHC1_DATA6		0x4000119e>,
+			   <MX91_PAD_SD1_DATA7__USDHC1_DATA7		0x4000119e>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = /* PU | FSEL 1 | DSE X4 */
+			   <MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY		0x31e>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91.dtsi b/arch/arm64/boot/dts/freescale/imx91.dtsi
new file mode 100644
index 000000000000..4d8300b2a7bc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+#include "imx91-pinfunc.h"
+#include "imx91_93_common.dtsi"
+
+&clk {
+	compatible = "fsl,imx91-ccm";
+};
+
+&ddr_pmu {
+	compatible = "fsl,imx91-ddr-pmu", "fsl,imx93-ddr-pmu";
+};
+
+&eqos {
+	clocks = <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
+		 <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
+		 <&clk IMX91_CLK_ENET_TIMER>,
+		 <&clk IMX91_CLK_ENET1_QOS_TSN>,
+		 <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>;
+	assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
+			  <&clk IMX91_CLK_ENET1_QOS_TSN>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+	assigned-clock-rates = <100000000>, <250000000>;
+};
+
+&fec {
+	clocks = <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
+		 <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
+		 <&clk IMX91_CLK_ENET_TIMER>,
+		 <&clk IMX91_CLK_ENET2_REGULAR>,
+		 <&clk IMX93_CLK_DUMMY>;
+	assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
+			  <&clk IMX91_CLK_ENET2_REGULAR>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+	assigned-clock-rates = <100000000>, <250000000>;
+};
+
+&i3c1 {
+	clocks = <&clk IMX93_CLK_BUS_AON>,
+		 <&clk IMX93_CLK_I3C1_GATE>,
+		 <&clk IMX93_CLK_DUMMY>;
+};
+
+&i3c2 {
+	clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+		 <&clk IMX93_CLK_I3C2_GATE>,
+		 <&clk IMX93_CLK_DUMMY>;
+};
+
+&iomuxc {
+	compatible = "fsl,imx91-iomuxc";
+};
+
+&media_blk_ctrl {
+	compatible = "fsl,imx91-media-blk-ctrl", "syscon";
+	clocks = <&clk IMX93_CLK_MEDIA_APB>,
+		 <&clk IMX93_CLK_MEDIA_AXI>,
+		 <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+		 <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+		 <&clk IMX93_CLK_CAM_PIX>,
+		 <&clk IMX93_CLK_LCDIF_GATE>,
+		 <&clk IMX93_CLK_ISI_GATE>,
+		 <&clk IMX93_CLK_MIPI_CSI_GATE>;
+	clock-names = "apb", "axi", "nic", "disp", "cam",
+		      "lcdif", "isi", "csi";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
new file mode 100644
index 000000000000..52da571f26c4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
@@ -0,0 +1,1187 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022,2025 NXP
+ */
+
+#include <dt-bindings/clock/imx93-clock.h>
+#include <dt-bindings/dma/fsl-edma.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/fsl,imx93-power.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx93-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <10000>;
+				exit-latency-us = <7000>;
+				min-residency-us = <27000>;
+				wakeup-latency-us = <15000>;
+			};
+		};
+
+		A55_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+		};
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,no-tick-in-suspend;
+		interrupt-parent = <&gic>;
+	};
+
+	gic: interrupt-controller@48000000 {
+		compatible = "arm,gic-v3";
+		reg = <0 0x48000000 0 0x10000>,
+		      <0 0x48040000 0 0xc0000>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+	};
+
+	mqs1: mqs1 {
+		compatible = "fsl,imx93-mqs";
+		gpr = <&aonmix_ns_gpr>;
+		status = "disabled";
+	};
+
+	mqs2: mqs2 {
+		compatible = "fsl,imx93-mqs";
+		gpr = <&wakeupmix_gpr>;
+		status = "disabled";
+	};
+
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+		clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
+		clock-names = "main_clk";
+	};
+
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+		clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
+		clock-names = "main_clk";
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x80000000>,
+			 <0x28000000 0x0 0x28000000 0x10000000>;
+
+		aips1: bus@44000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x44000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			edma1: dma-controller@44000000 {
+				compatible = "fsl,imx93-edma3";
+				reg = <0x44000000 0x200000>;
+				#dma-cells = <3>;
+				dma-channels = <31>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,  //  0: Reserved
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,  //  1: CANFD1
+					     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,  //  2: Reserved
+					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,  //  3: GPIO1 CH0
+					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,  //  4: GPIO1 CH1
+					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, //  5: I3C1 TO Bus
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, //  6: I3C1 From Bus
+					     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, //  7: LPI2C1 M TX
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, //  8: LPI2C1 S TX
+					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, //  9: LPI2C2 M RX
+					     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, // 10: LPI2C2 S RX
+					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, // 11: LPSPI1 TX
+					     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, // 12: LPSPI1 RX
+					     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, // 13: LPSPI2 TX
+					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, // 14: LPSPI2 RX
+					     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, // 15: LPTMR1
+					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, // 16: LPUART1 TX
+					     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, // 17: LPUART1 RX
+					     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, // 18: LPUART2 TX
+					     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, // 19: LPUART2 RX
+					     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, // 20: S400
+					     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, // 21: SAI TX
+					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, // 22: SAI RX
+					     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, // 23: TPM1 CH0/CH2
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, // 24: TPM1 CH1/CH3
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, // 25: TPM1 Overflow
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, // 26: TMP2 CH0/CH2
+					     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, // 27: TMP2 CH1/CH3
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, // 28: TMP2 Overflow
+					     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, // 29: PDM
+					     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, // 30: ADC1
+					     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;  // err
+				clocks = <&clk IMX93_CLK_EDMA1_GATE>;
+				clock-names = "dma";
+			};
+
+			aonmix_ns_gpr: syscon@44210000 {
+				compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon";
+				reg = <0x44210000 0x1000>;
+			};
+
+			system_counter: timer@44290000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x44290000 0x30000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+				nxp,no-divider;
+			};
+
+			wdog1: watchdog@442d0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x442d0000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG1_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@442e0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x442e0000 0x10000>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG2_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			tpm1: pwm@44310000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44310000 0x1000>;
+				clocks = <&clk IMX93_CLK_TPM1_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm2: pwm@44320000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44320000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM2_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i3c1: i3c@44330000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x44330000 0x10000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&clk IMX93_CLK_BUS_AON>,
+					 <&clk IMX93_CLK_I3C1_GATE>,
+					 <&clk IMX93_CLK_I3C1_SLOW>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			lpi2c1: i2c@44340000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44340000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 7 0 0>, <&edma1 8 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c2: i2c@44350000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44350000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 9 0 0>, <&edma1 10 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi1: spi@44360000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x44360000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI1_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 11 0 0>, <&edma1 12 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi2: spi@44370000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x44370000 0x10000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI2_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 13 0 0>, <&edma1 14 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart1: serial@44380000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x44380000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma1 17 0 FSL_EDMA_RX>, <&edma1 16 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart2: serial@44390000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x44390000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma1 19 0 FSL_EDMA_RX>, <&edma1 18 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan1: can@443a0000 {
+				compatible = "fsl,imx93-flexcan";
+				reg = <0x443a0000 0x10000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_AON>,
+					 <&clk IMX93_CLK_CAN1_GATE>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&clk IMX93_CLK_CAN1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&aonmix_ns_gpr 0x14 0>;
+				status = "disabled";
+			};
+
+			sai1: sai@443b0000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x443b0000 0x10000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 22 0 FSL_EDMA_RX>, <&edma1 21 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			iomuxc: pinctrl@443c0000 {
+				compatible = "fsl,imx93-iomuxc";
+				reg = <0x443c0000 0x10000>;
+				status = "okay";
+			};
+
+			bbnsm: bbnsm@44440000 {
+				compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd";
+				reg = <0x44440000 0x10000>;
+
+				bbnsm_rtc: rtc {
+					compatible = "nxp,imx93-bbnsm-rtc";
+					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				bbnsm_pwrkey: pwrkey {
+					compatible = "nxp,imx93-bbnsm-pwrkey";
+					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+					linux,code = <KEY_POWER>;
+				};
+			};
+
+			clk: clock-controller@44450000 {
+				compatible = "fsl,imx93-ccm";
+				reg = <0x44450000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1";
+				assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>;
+				assigned-clock-rates = <393216000>;
+				status = "okay";
+			};
+
+			src: system-controller@44460000 {
+				compatible = "fsl,imx93-src", "syscon";
+				reg = <0x44460000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				mediamix: power-domain@44462400 {
+					compatible = "fsl,imx93-src-slice";
+					reg = <0x44462400 0x400>, <0x44465800 0x400>;
+					#power-domain-cells = <0>;
+					clocks = <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+						 <&clk IMX93_CLK_MEDIA_APB>;
+				};
+			};
+
+			clock-controller@44480000 {
+				compatible = "fsl,imx93-anatop";
+				reg = <0x44480000 0x2000>;
+				#clock-cells = <1>;
+			};
+
+			micfil: micfil@44520000 {
+				compatible = "fsl,imx93-micfil";
+				reg = <0x44520000 0x10000>;
+				interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_PDM_IPG>,
+					 <&clk IMX93_CLK_PDM_GATE>,
+					 <&clk IMX93_CLK_AUDIO_PLL>;
+				clock-names = "ipg_clk", "ipg_clk_app", "pll8k";
+				dmas = <&edma1 29 0 5>;
+				dma-names = "rx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			adc1: adc@44530000 {
+				compatible = "nxp,imx93-adc";
+				reg = <0x44530000 0x10000>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_ADC1_GATE>;
+				clock-names = "ipg";
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		aips2: bus@42000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x42000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			edma2: dma-controller@42000000 {
+				compatible = "fsl,imx93-edma4";
+				reg = <0x42000000 0x210000>;
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_EDMA2_GATE>;
+				clock-names = "dma";
+			};
+
+			wakeupmix_gpr: syscon@42420000 {
+				compatible = "fsl,imx93-wakeupmix-syscfg", "syscon";
+				reg = <0x42420000 0x1000>;
+			};
+
+			wdog3: watchdog@42490000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x42490000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG3_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			wdog4: watchdog@424a0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x424a0000 0x10000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG4_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			wdog5: watchdog@424b0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x424b0000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG5_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			tpm3: pwm@424e0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424e0000 0x1000>;
+				clocks = <&clk IMX93_CLK_TPM3_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm4: pwm@424f0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424f0000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM4_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm5: pwm@42500000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42500000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM5_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm6: pwm@42510000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42510000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM6_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i3c2: i3c@42520000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x42520000 0x10000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_I3C2_GATE>,
+					 <&clk IMX93_CLK_I3C2_SLOW>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			lpi2c3: i2c@42530000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42530000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 8 0 0>, <&edma2 9 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c4: i2c@42540000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42540000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 10 0 0>, <&edma2 11 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi3: spi@42550000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42550000 0x10000>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI3_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 12 0 0>, <&edma2 13 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi4: spi@42560000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42560000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI4_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 14 0 0>, <&edma2 15 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart3: serial@42570000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42570000 0x1000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart4: serial@42580000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42580000 0x1000>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart5: serial@42590000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42590000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart6: serial@425a0000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x425a0000 0x1000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan2: can@425b0000 {
+				compatible = "fsl,imx93-flexcan";
+				reg = <0x425b0000 0x10000>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_CAN2_GATE>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&clk IMX93_CLK_CAN2>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&wakeupmix_gpr 0x0c 2>;
+				status = "disabled";
+			};
+
+			flexspi1: spi@425e0000 {
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>,
+					 <&clk IMX93_CLK_FLEXSPI1_GATE>;
+				clock-names = "fspi_en", "fspi";
+				assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				status = "disabled";
+			};
+
+			sai2: sai@42650000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x42650000 0x10000>;
+				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			sai3: sai@42660000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x42660000 0x10000>;
+				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			xcvr: xcvr@42680000 {
+				compatible = "fsl,imx93-xcvr";
+				reg = <0x42680000 0x800>,
+				      <0x42680800 0x400>,
+				      <0x42680c00 0x080>,
+				      <0x42680e00 0x080>;
+				reg-names = "ram", "regs", "rxfifo", "txfifo";
+				interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SPDIF_IPG>,
+					 <&clk IMX93_CLK_SPDIF_GATE>,
+					 <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_AUD_XCVR_GATE>;
+				clock-names = "ipg", "phy", "spba", "pll_ipg";
+				dmas = <&edma2 65 0 FSL_EDMA_RX>, <&edma2 66 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			lpuart7: serial@42690000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42690000 0x1000>;
+				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart8: serial@426a0000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x426a0000 0x1000>;
+				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpi2c5: i2c@426b0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426b0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 71 0 0>, <&edma2 72 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c6: i2c@426c0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426c0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 73 0 0>, <&edma2 74 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c7: i2c@426d0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426d0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 75 0 0>, <&edma2 76 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c8: i2c@426e0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426e0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 77 0 0>, <&edma2 78 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi5: spi@426f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x426f0000 0x10000>;
+				interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI5_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 79 0 0>, <&edma2 80 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi6: spi@42700000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42700000 0x10000>;
+				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI6_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 81 0 0>, <&edma2 82 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi7: spi@42710000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42710000 0x10000>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI7_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 83 0 0>, <&edma2 84 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi8: spi@42720000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42720000 0x10000>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI8_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 85 0 0>, <&edma2 86 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+		};
+
+		aips3: bus@42800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x42800000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usdhc1: mmc@42850000 {
+				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42850000 0x10000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
+					 <&clk IMX93_CLK_USDHC1_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX93_CLK_USDHC1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <8>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@42860000 {
+				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42860000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
+					 <&clk IMX93_CLK_USDHC2_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX93_CLK_USDHC2>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			fec: ethernet@42890000 {
+				compatible = "fsl,imx93-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				reg = <0x42890000 0x10000>;
+				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_ENET1_GATE>,
+					 <&clk IMX93_CLK_ENET1_GATE>,
+					 <&clk IMX93_CLK_ENET_TIMER1>,
+					 <&clk IMX93_CLK_ENET_REF>,
+					 <&clk IMX93_CLK_ENET_REF_PHY>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
+						  <&clk IMX93_CLK_ENET_REF>,
+						  <&clk IMX93_CLK_ENET_REF_PHY>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>,
+							 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+				assigned-clock-rates = <100000000>, <250000000>, <50000000>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>;
+				nvmem-cells = <&eth_mac1>;
+				nvmem-cell-names = "mac-address";
+				status = "disabled";
+			};
+
+			eqos: ethernet@428a0000 {
+				compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a";
+				reg = <0x428a0000 0x10000>;
+				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_wake_irq";
+				clocks = <&clk IMX93_CLK_ENET_QOS_GATE>,
+					 <&clk IMX93_CLK_ENET_QOS_GATE>,
+					 <&clk IMX93_CLK_ENET_TIMER2>,
+					 <&clk IMX93_CLK_ENET>,
+					 <&clk IMX93_CLK_ENET_QOS_GATE>;
+				clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
+				assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>,
+						  <&clk IMX93_CLK_ENET>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+				assigned-clock-rates = <100000000>, <250000000>;
+				intf_mode = <&wakeupmix_gpr 0x28>;
+				snps,clk-csr = <6>;
+				nvmem-cells = <&eth_mac2>;
+				nvmem-cell-names = "mac-address";
+				status = "disabled";
+			};
+
+			usdhc3: mmc@428b0000 {
+				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x428b0000 0x10000>;
+				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
+					 <&clk IMX93_CLK_USDHC3_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX93_CLK_USDHC3>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+		};
+
+		gpio2: gpio@43810000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x43810000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO2_GATE>,
+				 <&clk IMX93_CLK_GPIO2_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 4 30>;
+			ngpios = <30>;
+		};
+
+		gpio3: gpio@43820000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x43820000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO3_GATE>,
+				 <&clk IMX93_CLK_GPIO3_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>,
+				      <&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
+			ngpios = <32>;
+		};
+
+		gpio4: gpio@43830000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x43830000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO4_GATE>,
+				 <&clk IMX93_CLK_GPIO4_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
+			ngpios = <30>;
+		};
+
+		gpio1: gpio@47400000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x47400000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO1_GATE>,
+				 <&clk IMX93_CLK_GPIO1_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 92 16>;
+			ngpios = <16>;
+		};
+
+		ocotp: efuse@47510000 {
+			compatible = "fsl,imx93-ocotp", "syscon";
+			reg = <0x47510000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth_mac1: mac-address@4ec {
+				reg = <0x4ec 0x6>;
+			};
+
+			eth_mac2: mac-address@4f2 {
+				reg = <0x4f2 0x6>;
+			};
+
+		};
+
+		s4muap: mailbox@47520000 {
+			compatible = "fsl,imx93-mu-s4";
+			reg = <0x47520000 0x10000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			#mbox-cells = <2>;
+		};
+
+		media_blk_ctrl: system-controller@4ac10000 {
+			compatible = "fsl,imx93-media-blk-ctrl", "syscon";
+			reg = <0x4ac10000 0x10000>;
+			power-domains = <&mediamix>;
+			clocks = <&clk IMX93_CLK_MEDIA_APB>,
+				 <&clk IMX93_CLK_MEDIA_AXI>,
+				 <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+				 <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+				 <&clk IMX93_CLK_CAM_PIX>,
+				 <&clk IMX93_CLK_PXP_GATE>,
+				 <&clk IMX93_CLK_LCDIF_GATE>,
+				 <&clk IMX93_CLK_ISI_GATE>,
+				 <&clk IMX93_CLK_MIPI_CSI_GATE>,
+				 <&clk IMX93_CLK_MIPI_DSI_GATE>;
+			clock-names = "apb", "axi", "nic", "disp", "cam",
+				      "pxp", "lcdif", "isi", "csi", "dsi";
+			#power-domain-cells = <1>;
+			status = "disabled";
+		};
+
+		usbotg1: usb@4c100000 {
+			compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+			reg = <0x4c100000 0x200>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
+				 <&clk IMX93_CLK_HSIO_32K_GATE>;
+			clock-names = "usb_ctrl_root", "usb_wakeup";
+			assigned-clocks = <&clk IMX93_CLK_HSIO>;
+			assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+			assigned-clock-rates = <133000000>;
+			phys = <&usbphynop1>;
+			fsl,usbmisc = <&usbmisc1 0>;
+			status = "disabled";
+		};
+
+		usbmisc1: usbmisc@4c100200 {
+			compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
+			reg = <0x4c100200 0x200>;
+			#index-cells = <1>;
+		};
+
+		usbotg2: usb@4c200000 {
+			compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+			reg = <0x4c200000 0x200>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
+				 <&clk IMX93_CLK_HSIO_32K_GATE>;
+			clock-names = "usb_ctrl_root", "usb_wakeup";
+			assigned-clocks = <&clk IMX93_CLK_HSIO>;
+			assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+			assigned-clock-rates = <133000000>;
+			phys = <&usbphynop2>;
+			fsl,usbmisc = <&usbmisc2 0>;
+			status = "disabled";
+		};
+
+		usbmisc2: usbmisc@4c200200 {
+			compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
+			reg = <0x4c200200 0x200>;
+			#index-cells = <1>;
+		};
+
+		memory-controller@4e300000 {
+			compatible = "nxp,imx9-memory-controller";
+			reg = <0x4e300000 0x800>, <0x4e301000 0x1000>;
+			reg-names = "ctrl", "inject";
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+		};
+
+		ddr_pmu: ddr-pmu@4e300dc0 {
+			compatible = "fsl,imx93-ddr-pmu";
+			reg = <0x4e300dc0 0x200>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index 69786c326db0..b94a24193e19 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -5,16 +5,124 @@
 
 /dts-v1/;
 
+#include <dt-bindings/usb/pd.h>
 #include "imx93.dtsi"
 
 / {
 	model = "NXP i.MX93 11X11 EVK board";
 	compatible = "fsl,imx93-11x11-evk", "fsl,imx93";
 
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+	};
+
 	chosen {
 		stdout-path = &lpuart1;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+
+		vdev0vring0: vdev0vring0@a4000000 {
+			reg = <0 0xa4000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@a4008000 {
+			reg = <0 0xa4008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@a4010000 {
+			reg = <0 0xa4010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@a4018000 {
+			reg = <0 0xa4018000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@2021e000 {
+			reg = <0 0x2021e000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@a4020000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4020000 0 0x100000>;
+			no-map;
+		};
+
+	};
+
+	reg_vdd_12v: regulator-vdd-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&pcal6524 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&adp5585 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can2_standby: regulator-can2-standby {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&adp5585 6 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_m2_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "M.2-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -23,16 +131,406 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <12000>;
+		enable-active-high;
+	};
+
+	reg_usdhc3_vmmc: regulator-usdhc3 {
+		compatible = "regulator-fixed";
+		regulator-name = "WLAN_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_m2_pwr>;
+		gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
+		/*
+		 * IW612 wifi chip needs more delay than other wifi chips to complete
+		 * the host interface initialization after power up, otherwise the
+		 * internal state of IW612 may be unstable, resulting in the failure of
+		 * the SDIO3.0 switch voltage.
+		 */
+		startup-delay-us = <20000>;
 		enable-active-high;
 	};
+
+	usdhc3_pwrseq: usdhc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&adp5585 0 100000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <100>;
+		power-supply = <&reg_vdd_12v>;
+		enable-gpios = <&adp5585 9 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	bt_sco_codec: bt-sco-codec {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			link-name = "micfil hifi";
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8962>;
+		hp-det-gpio = <&pcal6524 4 GPIO_ACTIVE_HIGH>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC",
+			"IN1R", "AMIC";
+	};
+
+	sound-xcvr {
+		compatible = "fsl,imx-audio-card";
+		model = "imx-audio-xcvr";
+
+		pri-dai-link {
+			link-name = "XCVR PCM";
+
+			cpu {
+				sound-dai = <&xcvr>;
+			};
+		};
+	};
 };
 
-&mu1 {
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
 	status = "okay";
 };
 
-&mu2 {
+&cm33 {
+	mbox-names = "tx", "rx", "rxdb";
+	mboxes = <&mu1 0 1>,
+		 <&mu1 1 1>,
+		 <&mu1 3 1>;
+	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+			<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-1 = <&pinctrl_eqos_sleep>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-1 = <&pinctrl_fec_sleep>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy2>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+			reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_standby>;
+	status = "okay";
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	wm8962: codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX93_CLK_SAI3_GATE>;
+		DCVDD-supply = <&reg_audio_pwr>;
+		DBVDD-supply = <&reg_audio_pwr>;
+		AVDD-supply = <&reg_audio_pwr>;
+		CPVDD-supply = <&reg_audio_pwr>;
+		MICVDD-supply = <&reg_audio_pwr>;
+		PLLVDD-supply = <&reg_audio_pwr>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+		SPKVDD2-supply = <&reg_audio_pwr>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	inertial-meter@6a {
+		compatible = "st,lsm6dso";
+		reg = <0x6a>;
+	};
+};
+
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <610000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <670000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1060000>;
+				regulator-max-microvolt = <1140000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <840000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	adp5585: io-expander@34 {
+		compatible = "adi,adp5585-00", "adi,adp5585";
+		reg = <0x34>;
+		vdd-supply = <&buck4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-reserved-ranges = <5 1>;
+		#pwm-cells = <3>;
+	};
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
 	status = "okay";
+
+	adp5585_isp: io-expander@34 {
+		compatible = "adi,adp5585-01", "adi,adp5585";
+		reg = <0x34>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#pwm-cells = <3>;
+	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec1_dr_sw: endpoint {
+						remote-endpoint = <&usb1_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
+	ptn5110_2: tcpc@51 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x51>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+		typec2_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec2_dr_sw: endpoint {
+						remote-endpoint = <&usb2_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
+	pcf2131: rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
 };
 
 &lpuart1 { /* console */
@@ -41,30 +539,233 @@
 	status = "okay";
 };
 
+&lpuart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&micfil {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_pdm>;
+	pinctrl-1 = <&pinctrl_pdm_sleep>;
+	assigned-clocks = <&clk IMX93_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <49152000>;
+	status = "okay";
+};
+
+&mu1 {
+	status = "okay";
+};
+
+&mu2 {
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_sai1>;
+	pinctrl-1 = <&pinctrl_sai1_sleep>;
+	assigned-clocks = <&clk IMX93_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_sai3>;
+	pinctrl-1 = <&pinctrl_sai3_sleep>;
+	assigned-clocks = <&clk IMX93_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb2_drd_sw: endpoint {
+			remote-endpoint = <&typec2_dr_sw>;
+		};
+	};
+};
+
 &usdhc1 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1>;
-	pinctrl-2 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
 };
 
 &usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
 	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
 	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
 	bus-width = <4>;
 	status = "okay";
-	no-sdio;
 	no-mmc;
 };
 
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	vmmc-supply = <&reg_usdhc3_vmmc>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&xcvr {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_spdif>;
+	pinctrl-1 = <&pinctrl_spdif_sleep>;
+	assigned-clocks = <&clk IMX93_CLK_SPDIF>,
+			 <&clk IMX93_CLK_AUDIO_XCVR>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>,
+			 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+	assigned-clock-rates = <12288000>, <200000000>;
+	status = "okay";
+};
+
 &iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x57e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x57e
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x58e
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
+		>;
+	};
+
+	pinctrl_eqos_sleep: eqossleepgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_MDC__GPIO4_IO00				0x31e
+			MX93_PAD_ENET1_MDIO__GPIO4_IO01				0x31e
+			MX93_PAD_ENET1_RD0__GPIO4_IO10                          0x31e
+			MX93_PAD_ENET1_RD1__GPIO4_IO11				0x31e
+			MX93_PAD_ENET1_RD2__GPIO4_IO12				0x31e
+			MX93_PAD_ENET1_RD3__GPIO4_IO13				0x31e
+			MX93_PAD_ENET1_RXC__GPIO4_IO09                          0x31e
+			MX93_PAD_ENET1_RX_CTL__GPIO4_IO08			0x31e
+			MX93_PAD_ENET1_TD0__GPIO4_IO05                          0x31e
+			MX93_PAD_ENET1_TD1__GPIO4_IO04                          0x31e
+			MX93_PAD_ENET1_TD2__GPIO4_IO03				0x31e
+			MX93_PAD_ENET1_TD3__GPIO4_IO02				0x31e
+			MX93_PAD_ENET1_TXC__GPIO4_IO07                          0x31e
+			MX93_PAD_ENET1_TX_CTL__GPIO4_IO06                       0x31e
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x57e
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x57e
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x58e
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x58e
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e
+		>;
+	};
+
+	pinctrl_fec_sleep: fecsleepgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_MDC__GPIO4_IO14			0x51e
+			MX93_PAD_ENET2_MDIO__GPIO4_IO15			0x51e
+			MX93_PAD_ENET2_RD0__GPIO4_IO24			0x51e
+			MX93_PAD_ENET2_RD1__GPIO4_IO25			0x51e
+			MX93_PAD_ENET2_RD2__GPIO4_IO26			0x51e
+			MX93_PAD_ENET2_RD3__GPIO4_IO27			0x51e
+			MX93_PAD_ENET2_RXC__GPIO4_IO23                  0x51e
+			MX93_PAD_ENET2_RX_CTL__GPIO4_IO22		0x51e
+			MX93_PAD_ENET2_TD0__GPIO4_IO19			0x51e
+			MX93_PAD_ENET2_TD1__GPIO4_IO18			0x51e
+			MX93_PAD_ENET2_TD2__GPIO4_IO17			0x51e
+			MX93_PAD_ENET2_TD3__GPIO4_IO16			0x51e
+			MX93_PAD_ENET2_TXC__GPIO4_IO21                  0x51e
+			MX93_PAD_ENET2_TX_CTL__GPIO4_IO20               0x51e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO25__CAN2_TX	0x139e
+			MX93_PAD_GPIO_IO27__CAN2_RX	0x139e
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
@@ -72,19 +773,124 @@
 		>;
 	};
 
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX		0x31e
+			MX93_PAD_DAP_TDI__LPUART5_RX			0x31e
+			MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B		0x31e
+			MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B		0x31e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL			0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL			0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA			0x40000b9e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL			0x40000b9e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x31e
+		>;
+	};
+
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__PDM_CLK			0x31e
+			MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00	0x31e
+			MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01	0x31e
+		>;
+	};
+
+	pinctrl_pdm_sleep: pdmsleepgrp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__GPIO1_IO08			0x31e
+			MX93_PAD_PDM_BIT_STREAM0__GPIO1_IO09		0x31e
+			MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10		0x31e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__SAI1_TX_BCLK			0x31e
+			MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC		0x31e
+			MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00		0x31e
+			MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00		0x31e
+		>;
+	};
+
+	pinctrl_sai1_sleep: sai1sleepgrp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__GPIO1_IO12                   0x51e
+			MX93_PAD_SAI1_TXFS__GPIO1_IO11			0x51e
+			MX93_PAD_SAI1_TXD0__GPIO1_IO13			0x51e
+			MX93_PAD_SAI1_RXD0__GPIO1_IO14			0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
-			MX93_PAD_SD1_CLK__USDHC1_CLK		0x17fe
-			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
-			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
-			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
-			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
-			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
-			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
-			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
-			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
-			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
-			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x17fe
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x1582
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x40001382
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x40001382
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x40001382
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x40001382
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x40001382
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x40001382
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x40001382
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x40001382
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x40001382
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x1582
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x158e
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000138e
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x4000138e
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x4000138e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x4000138e
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x4000138e
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x4000138e
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x4000138e
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x4000138e
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x400013fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x400013fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x400013fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x400013fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x400013fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x400013fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x400013fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x400013fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
 		>;
 	};
 
@@ -94,21 +900,159 @@
 		>;
 	};
 
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO26__SAI3_TX_SYNC                0x31e
+			MX93_PAD_GPIO_IO16__SAI3_TX_BCLK                0x31e
+			MX93_PAD_GPIO_IO17__SAI3_MCLK           0x31e
+			MX93_PAD_GPIO_IO19__SAI3_TX_DATA00              0x31e
+			MX93_PAD_GPIO_IO20__SAI3_RX_DATA00              0x31e
+		>;
+	};
+
+	pinctrl_sai3_sleep: sai3sleepgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO26__GPIO2_IO26			0x51e
+			MX93_PAD_GPIO_IO16__GPIO2_IO16			0x51e
+			MX93_PAD_GPIO_IO17__GPIO2_IO17			0x51e
+			MX93_PAD_GPIO_IO19__GPIO2_IO19			0x51e
+			MX93_PAD_GPIO_IO20__GPIO2_IO20			0x51e
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__SPDIF_IN		0x31e
+			MX93_PAD_GPIO_IO23__SPDIF_OUT		0x31e
+		>;
+	};
+
+	pinctrl_spdif_sleep: spdifsleepgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__GPIO2_IO22		0x31e
+			MX93_PAD_GPIO_IO23__GPIO2_IO23		0x31e
+		>;
+	};
+
 	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
 		fsl,pins = <
 			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
 		>;
 	};
 
+	pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleepgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
-			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17fe
-			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
-			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
-			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
-			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
-			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x1582
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x40001382
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x40001382
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x40001382
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x40001382
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x40001382
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000138e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000138e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x400013fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x400013fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x400013fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x400013fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x400013fe
 			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
 		>;
 	};
+
+	pinctrl_usdhc2_sleep: usdhc2sleepgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__GPIO3_IO01            0x51e
+			MX93_PAD_SD2_CMD__GPIO3_IO02		0x51e
+			MX93_PAD_SD2_DATA0__GPIO3_IO03		0x51e
+			MX93_PAD_SD2_DATA1__GPIO3_IO04		0x51e
+			MX93_PAD_SD2_DATA2__GPIO3_IO05		0x51e
+			MX93_PAD_SD2_DATA3__GPIO3_IO06		0x51e
+			MX93_PAD_SD2_VSELECT__GPIO3_IO19	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x1582
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x40001382
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x40001382
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x40001382
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x40001382
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x40001382
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x158e
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x4000138e
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x4000138e
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x4000138e
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x4000138e
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x4000138e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x15fe
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x400013fe
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x400013fe
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x400013fe
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x400013fe
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x400013fe
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3grpsleepgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__GPIO3_IO20		0x31e
+			MX93_PAD_SD3_CMD__GPIO3_IO21		0x31e
+			MX93_PAD_SD3_DATA0__GPIO3_IO22		0x31e
+			MX93_PAD_SD3_DATA1__GPIO3_IO23		0x31e
+			MX93_PAD_SD3_DATA2__GPIO3_IO24		0x31e
+			MX93_PAD_SD3_DATA3__GPIO3_IO25		0x31e
+		>;
+	};
+
+	pinctrl_usdhc3_wlan: usdhc3wlangrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x31e
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY	0x31e
+		>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts b/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts
new file mode 100644
index 000000000000..f9eebd27d640
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts
@@ -0,0 +1,674 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx93.dtsi"
+
+/ {
+	model = "NXP i.MX93 14X14 EVK board";
+	compatible = "fsl,imx93-14x14-evk", "fsl,imx93";
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+
+		vdev0vring0: vdev0vring0@a4000000 {
+			reg = <0 0xa4000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@a4008000 {
+			reg = <0 0xa4008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@a4010000 {
+			reg = <0 0xa4010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@a4018000 {
+			reg = <0 0xa4018000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@2021e000 {
+			reg = <0 0x2021e000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@a4020000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4020000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can1-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524_2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can1_en>;
+	};
+
+	reg_can1_en: regulator-can1-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can1-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524_2 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524_2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can2_en>;
+	};
+
+	reg_can2_en: regulator-can2-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524_2 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_m2_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "M.2-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <12000>;
+	};
+
+	reg_usdhc3_vmmc: regulator-usdhc3 {
+		compatible = "regulator-fixed";
+		regulator-name = "WLAN_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_m2_pwr>;
+		gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
+		/*
+		 * IW612 wifi chip needs more delay than other wifi chips to complete
+		 * the host interface initialization after power up, otherwise the
+		 * internal state of IW612 may be unstable, resulting in the failure of
+		 * the SDIO3.0 switch voltage.
+		 */
+		startup-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	reg_vdd_12v: regulator-vdd-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_vdd_12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&pcal6524 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	usdhc3_pwrseq: usdhc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&cm33 {
+	mbox-names = "tx", "rx", "rxdb";
+	mboxes = <&mu1 0 1>,
+		 <&mu1 1 1>,
+		 <&mu1 3 1>;
+	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+			<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy2>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy2: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+			eee-broken-1000t;
+			reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	lsm6dsm@6a {
+		compatible = "st,lsm6dso";
+		reg = <0x6a>;
+	};
+};
+
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	pcal6524_2: gpio@20 {
+		compatible = "nxp,pcal6524";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmic@25 {
+		compatible = "nxp,pca9452";
+		reg = <0x25>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <610000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <670000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1060000>;
+				regulator-max-microvolt = <1140000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1710000>;
+				regulator-max-microvolt = <1890000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <840000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	status = "okay";
+};
+
+&lpuart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&mu1 {
+	status = "okay";
+};
+
+&mu2 {
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-mmc;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	vmmc-supply = <&reg_usdhc3_vmmc>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__CAN1_TX		0x139e
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO25__CAN2_TX	0x139e
+			MX93_PAD_GPIO_IO27__CAN2_RX	0x139e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL			0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL			0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA			0x40000b9e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL			0x40000b9e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x31e
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x57e
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x57e
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x58e
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x58e
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX	0x31e
+			MX93_PAD_DAP_TDI__LPUART5_RX		0x31e
+			MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B	0x31e
+			MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B	0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x1582
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x40001382
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x40001382
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x40001382
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x40001382
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x40001382
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x40001382
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x40001382
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x40001382
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x40001382
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x1582
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x158e
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000138e
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x4000138e
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x4000138e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x4000138e
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x4000138e
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x4000138e
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x4000138e
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x4000138e
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x400013fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x400013fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x400013fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x400013fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x400013fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x400013fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x400013fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x400013fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x1582
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x40001382
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x40001382
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x40001382
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x40001382
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x40001382
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000138e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000138e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x400013fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x400013fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x400013fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x400013fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x400013fe
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x1582
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x40001382
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x40001382
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x40001382
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x40001382
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x40001382
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x158e
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x4000138e
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x4000138e
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x4000138e
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x4000138e
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x4000138e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x15fe
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x400013fe
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x400013fe
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x400013fe
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x400013fe
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x400013fe
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3grpsleepgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__GPIO3_IO20		0x31e
+			MX93_PAD_SD3_CMD__GPIO3_IO21		0x31e
+			MX93_PAD_SD3_DATA0__GPIO3_IO22		0x31e
+			MX93_PAD_SD3_DATA1__GPIO3_IO23		0x31e
+			MX93_PAD_SD3_DATA2__GPIO3_IO24		0x31e
+			MX93_PAD_SD3_DATA3__GPIO3_IO25		0x31e
+		>;
+	};
+
+	pinctrl_usdhc3_wlan: usdhc3wlangrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26	  0x31e
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY	0x31e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso
new file mode 100644
index 000000000000..3fe6209a3423
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb-i3c.dtso
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i3c/i3c.h>
+#include <dt-bindings/usb/pd.h>
+
+#include "imx93-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&lpi2c1 {
+	status = "disabled";
+};
+
+&i3c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i3c1>;
+	#address-cells = <3>;
+	#size-cells = <0>;
+	i2c-scl-hz = <400000>;
+	status = "okay";
+
+	tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50 0x00 (I2C_FM | I2C_NO_FILTER_LOW_FREQUENCY)>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec1_dr_sw: endpoint {
+						remote-endpoint = <&usb1_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&usb1_drd_sw {
+	remote-endpoint = <&typec1_dr_sw>;
+};
+
+&iomuxc {
+	pinctrl_i3c1: i3c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__I3C1_SCL	0x40000186
+			MX93_PAD_I2C1_SDA__I3C1_SDA	0x40000186
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
new file mode 100644
index 000000000000..0852067eab2c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
@@ -0,0 +1,772 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx93.dtsi"
+
+/ {
+	model = "NXP i.MX93 9x9 Quick Start Board";
+	compatible = "fsl,imx93-9x9-qsb", "fsl,imx93";
+
+	bt_sco_codec: bt-sco-codec {
+		#sound-dai-cells = <1>;
+		compatible = "linux,bt-sco";
+	};
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+
+		vdev0vring0: vdev0vring0@a4000000 {
+			reg = <0 0xa4000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@a4008000 {
+			reg = <0 0xa4008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@a4010000 {
+			reg = <0 0xa4010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@a4018000 {
+			reg = <0 0xa4018000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@2021e000 {
+			reg = <0 0x2021e000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@a4020000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4020000 0 0x100000>;
+			no-map;
+		};
+
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "VREF_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_m2_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "M.2-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_rpi_3v3: regulator-rpi {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_RPI_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <12000>;
+	};
+
+	reg_usdhc3_vmmc: regulator-usdhc3 {
+		compatible = "regulator-fixed";
+		regulator-name = "WLAN_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_m2_pwr>;
+		gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
+		/*
+		 * IW612 wifi chip needs more delay than other wifi chips to complete
+		 * the host interface initialization after power up, otherwise the
+		 * internal state of IW612 may be unstable, resulting in the failure of
+		 * the SDIO3.0 switch voltage.
+		 */
+		startup-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			link-name = "micfil hifi";
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8962>;
+		hp-det-gpio = <&pcal6524 4 GPIO_ACTIVE_HIGH>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC",
+			"IN1R", "AMIC";
+	};
+
+	usdhc3_pwrseq: usdhc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&cm33 {
+	mbox-names = "tx", "rx", "rxdb";
+	mboxes = <&mu1 0 1>,
+		 <&mu1 1 1>,
+		 <&mu1 3 1>;
+	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+			<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX93_CLK_SAI3_GATE>;
+		DCVDD-supply = <&reg_audio_pwr>;
+		DBVDD-supply = <&reg_audio_pwr>;
+		AVDD-supply = <&reg_audio_pwr>;
+		CPVDD-supply = <&reg_audio_pwr>;
+		MICVDD-supply = <&reg_audio_pwr>;
+		PLLVDD-supply = <&reg_audio_pwr>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+		SPKVDD2-supply = <&reg_audio_pwr>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	p3t1085: temperature-sensor@48 {
+		compatible = "nxp,p3t1085";
+		reg = <0x48>;
+	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec1_dr_sw: endpoint {
+						remote-endpoint = <&usb1_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
+	rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	inertial-meter@6a {
+		compatible = "st,lsm6dso";
+		reg = <0x6a>;
+	};
+};
+
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6524>;
+
+		exp-sel-hog {
+			gpio-hog;
+			gpios = <22 GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+
+		mic-can-sel-hog {
+			gpio-hog;
+			gpios = <17 GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2237500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&lpuart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart5 {
+	/* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&micfil {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX93_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <49152000>;
+	status = "okay";
+};
+
+&mu1 {
+	status = "okay";
+};
+
+&mu2 {
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clk IMX93_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX93_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	fsl,sai-synchronous-rx;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-mmc;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	vmmc-supply = <&reg_usdhc3_vmmc>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x57e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x57e
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x58e
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL		0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL		0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x31e
+		>;
+	};
+
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__PDM_CLK			0x31e
+			MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00	0x31e
+			MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01	0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX	0x31e
+			MX93_PAD_DAP_TDI__LPUART5_RX		0x31e
+			MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B	0x31e
+			MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B	0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x1582
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x40001382
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x40001382
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x40001382
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x40001382
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x40001382
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x40001382
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x40001382
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x40001382
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x40001382
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x1582
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x158e
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000138e
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x4000138e
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x4000138e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x4000138e
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x4000138e
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x4000138e
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x4000138e
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x4000138e
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x400013fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x400013fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x400013fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x400013fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x400013fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x400013fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x400013fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x400013fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__SAI1_TX_BCLK			0x31e
+			MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC		0x31e
+			MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00		0x31e
+			MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00		0x31e
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO12__SAI3_RX_SYNC		0x31e
+			MX93_PAD_GPIO_IO18__SAI3_RX_BCLK		0x31e
+			MX93_PAD_GPIO_IO17__SAI3_MCLK			0x31e
+			MX93_PAD_GPIO_IO19__SAI3_TX_DATA00		0x31e
+			MX93_PAD_GPIO_IO20__SAI3_RX_DATA00		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x1582
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x40001382
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x40001382
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x40001382
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x40001382
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x40001382
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000138e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000138e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x400013fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x400013fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x400013fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x400013fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x400013fe
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x1582
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x40001382
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x40001382
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x40001382
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x40001382
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x40001382
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x158e
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x4000138e
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x4000138e
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x4000138e
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x4000138e
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x4000138e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x15fe
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x400013fe
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x400013fe
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x400013fe
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x400013fe
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x400013fe
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY	0x31e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
new file mode 100644
index 000000000000..4620c070f4d7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx93-kontron-osm-s.dtsi"
+
+/ {
+	model = "Kontron BL i.MX93 OSM-S";
+	compatible = "kontron,imx93-bl-osm-s", "kontron,imx93-osm-s", "fsl,imx93";
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		spi0 = &lpspi1;
+		spi1 = &lpspi2;
+		spi2 = &lpspi3;
+		spi3 = &lpspi4;
+		spi4 = &lpspi5;
+		spi5 = &lpspi6;
+		spi6 = &lpspi7;
+		spi7 = &lpspi8;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	pwm-beeper {
+		compatible = "pwm-beeper";
+		pwms = <&tpm6 1 5000 0>;
+	};
+
+	reg_vcc_panel: regulator-vcc-panel {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vcc_panel>;
+		gpio = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCC_PANEL";
+	};
+};
+
+&eqos { /* Second ethernet (OSM-S ETH_B) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos_rgmii>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-id4f51.e91b";
+			reg = <1>;
+			reset-assert-us = <10000>;
+			reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fec { /* First ethernet (OSM-S ETH_A) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_rgmii>;
+	phy-connection-type = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-id4f51.e91b";
+			reg = <1>;
+			reset-assert-us = <10000>;
+			reset-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&lpi2c2 {
+	status = "okay";
+
+	gpio_expander_dio: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "DIO1_OUT","DIO1_IN", "DIO2_OUT","DIO2_IN",
+				  "DIO3_OUT","DIO3_IN", "DIO4_OUT","DIO4_IN";
+		interrupt-parent = <&gpio4>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&lpspi8 {
+	assigned-clocks = <&clk IMX93_CLK_LPSPI8>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+	assigned-clock-rates = <100000000>;
+	status = "okay";
+
+	eeram@0 {
+		compatible = "microchip,48l640";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&lpuart1 {
+	status = "okay";
+};
+
+&lpuart7 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&lpuart6 {
+	linux,rs485-enabled-at-boot-time;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&tpm6 {
+	status = "okay";
+};
+
+&usbotg1 {
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	disable-over-current;
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+};
+
+&usbotg2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+
+	usb1@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+	};
+};
+
+&usdhc2 {
+	vmmc-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_reg_vcc_panel: regvccpanelgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO21__GPIO2_IO21		0x31e /* PWM_2 */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi
new file mode 100644
index 000000000000..c79b1df339db
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi
@@ -0,0 +1,636 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Kontron Electronics GmbH
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx93.dtsi"
+
+/ {
+	model = "Kontron OSM-S i.MX93";
+	compatible = "kontron,imx93-osm-s", "fsl,imx93";
+
+	aliases {
+		rtc0 = &rv3028;
+		rtc1 = &bbnsm_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reg_usdhc2_vcc: regulator-usdhc2-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vcc>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VCC_SDIO_A";
+	};
+
+	reg_vdd_carrier: regulator-vdd-carrier {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "VDD_CARRIER";
+
+		regulator-state-standby {
+			regulator-on-in-suspend;
+		};
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+
+		regulator-state-disk {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&flexcan1 { /* OSM-S CAN_A */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+&flexcan2 { /* OSM-S CAN_B */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+	gpio-line-names = "", "", "I2C_A_SCL", "I2C_A_SDA",
+			  "UART_CON_RX", "UART_CON_TX", "UART_C_RX", "UART_C_TX",
+			  "CAN_A_TX", "CAN_A_RX", "GPIO_A_0", "SPI_A_CS0",
+			  "SPI_A_SDI", "SPI_A_SCK","SPI_A_SDO";
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>;
+	gpio-line-names = "I2C_B_SDA", "I2C_B_SCL", "GPIO_B_1", "GPIO_A_2",
+			  "UART_B_TX", "UART_B_RX", "UART_B_RTS", "UART_B_CTS",
+			  "UART_A_TX", "UART_A_RX", "UART_A_RTS", "UART_A_CTS",
+			  "SPI_B_CS0", "SPI_B_SDI", "SPI_B_SDO", "SPI_B_SCK",
+			  "I2S_BITCLK", "I2S_MCLK", "GPIO_A_1", "I2S_A_DATA_OUT",
+			  "I2S_A_DATA_IN", "PWM_2", "GPIO_A_3", "PWM_1",
+			  "PWM_0", "CAN_B_TX", "I2S_LRCLK", "CAN_B_RX", "GPIO_A_4",
+			  "GPIO_A_5";
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3>;
+	gpio-line-names = "SDIO_A_CD", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0",
+			  "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "SDIO_A_PWR_EN",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SDIO_B_CLK", "SDIO_B_CMD", "SDIO_B_D0", "SDIO_B_D1",
+			  "SDIO_B_D2", "SDIO_B_D3", "GPIO_A_6", "GPIO_A_7";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+	gpio-line-names = "ETH_B_MDC", "ETH_B_MDIO", "ETH_B_TXD4", "ETH_B_TXD3",
+			  "ETH_B_TXD2", "ETH_B_TXD1", "ETH_B_TX_EN", "ETH_B_TX_CLK",
+			  "ETH_B_RX_CTL", "ETH_B_RX_CLK", "ETH_B_RXD0", "ETH_B_RXD1",
+			  "ETH_B_RXD2", "ETH_B_RXD3", "ETH_MDC", "ETH_MDIO",
+			  "ETH_A_TXD3", "ETH_A_TXD2", "ETH_A_TXD1", "ETH_A_TXD0",
+			  "ETH_A_TX_EN", "ETH_A_TX_CLK", "ETH_A_RX_CTL", "ETH_A_RX_CLK",
+			  "ETH_A_RXD0", "ETH_A_RXD1", "ETH_A_RXD2", "ETH_A_RXD3",
+			  "GPIO_B_0", "CARRIER_PWR_EN";
+};
+
+&lpi2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	pca9451: pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		nxp,i2c-lt-enable;
+
+		regulators {
+			reg_vdd_soc: BUCK1 { /* dual phase with BUCK3 */
+				regulator-name = "+0V8_VDD_SOC (BUCK1)";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vddq_ddr: BUCK2 {
+				regulator-name = "+0V6_VDDQ_DDR (BUCK2)";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <600000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-name = "+3V3 (BUCK4)";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-name = "+1V8 (BUCK5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_dram: BUCK6 {
+				regulator-name = "+1V1_NVCC_DRAM (BUCK6)";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_snvs: LDO1 {
+				regulator-name = "+1V8_NVCC_SNVS (LDO1)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_ana: LDO4 {
+				regulator-name = "+0V8_VDD_ANA (LDO4)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_sd: LDO5 {
+				regulator-name = "NVCC_SD (LDO5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				nxp,sd-vsel-fixed-low;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "onnn,n24s64b", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		size = <8192>;
+		num-addresses = <1>;
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&lpi2c2 { /* OSM-S I2C_A */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+};
+
+&lpi2c3 { /* OSM-S I2C_B */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+};
+
+&lpspi1 { /* OSM-S SPI_A */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi1>;
+	cs-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+};
+
+&lpspi8 { /* OSM-S SPI_B */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi8>;
+	cs-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+};
+
+&lpuart1 { /* OSM-S UART_CON */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+};
+
+&lpuart2 { /* OSM-S UART_C */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+};
+
+&lpuart6 { /* OSM-S UART_B */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart6>;
+};
+
+&lpuart7 { /* OSM-S UART_A */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart7>;
+};
+
+&tpm3 { /* OSM-S PWM_0 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm3>;
+};
+
+&tpm4 { /* OSM-S PWM_2 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm4>;
+};
+
+&tpm6 { /* OSM-S PWM_1 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm6>;
+};
+
+&usdhc1 { /* eMMC */
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 { /* OSM-S SDIO_A */
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_usdhc2_vcc>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+};
+
+&usdhc3 { /* OSM-S SDIO_B */
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+};
+
+&wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet_rgmii: enetrgmiigrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x57e /* ETH_MDC */
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x57e /* ETH_MDIO */
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e /* ETH_A_(S)(R)(G)MII_RXD0 */
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e /* ETH_A_(S)(R)(G)MII_RXD1 */
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e /* ETH_A_(R)(G)MII_RXD2 */
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e /* ETH_A_(R)(G)MII_RXD3 */
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe /* ETH_A_(R)(G)MII_RX_CLK */
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e /* ETH_A_(R)(G)MII_RX_DV(_ER) */
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e /* ETH_A_(S)(R)(G)MII_TXD0 */
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e /* ETH_A_(S)(R)(G)MII_TXD1 */
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e /* ETH_A_(S)(R)(G)MII_TXD2 */
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e /* ETH_A_(S)(R)(G)MII_TXD3 */
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x5fe /* ETH_A_(R)(G)MII_TX_CLK */
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e /* ETH_A_(R)(G)MII_TX_EN(_ER) */
+		>;
+	};
+
+	pinctrl_eqos_rgmii: eqosrgmiigrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC		0x57e /* ETH_B_MDC */
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO		0x57e /* ETH_B_MDIO */
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0		0x57e /* ETH_B_(S)(R)(G)MII_RXD0 */
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1		0x57e /* ETH_B_(S)(R)(G)MII_RXD1 */
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2		0x57e /* ETH_B_(R)(G)MII_RXD2 */
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3		0x57e /* ETH_B_(R)(G)MII_RXD3 */
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x57e /* ETH_B_(R)(G)MII_RX_CLK */
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e /* ETH_B_(R)(G)MII_RX_DV(_ER) */
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0		0x57e /* ETH_B_(S)(R)(G)MII_TXD0 */
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1		0x57e /* ETH_B_(S)(R)(G)MII_TXD1 */
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2		0x57e /* ETH_B_(S)(R)(G)MII_TXD2 */
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3		0x57e /* ETH_B_(S)(R)(G)MII_TXD3 */
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x57e /* ETH_B_(R)(G)MII_TX_CLK */
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x57e /* ETH_B_(R)(G)MII_TX_EN(_ER) */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__CAN1_TX			0x139e /* CAN_A_TX */
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX		0x139e /* CAN_A_RX */
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO25__CAN2_TX			0x139e /* CAN_B_TX */
+			MX93_PAD_GPIO_IO27__CAN2_RX			0x139e /* CAN_B_RX */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10		0x31e /* GPIO_A_0 */
+		>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO18__GPIO2_IO18			0x31e /* GPIO_A_1 */
+			MX93_PAD_GPIO_IO03__GPIO2_IO03			0x31e /* GPIO_A_2 */
+			MX93_PAD_GPIO_IO22__GPIO2_IO22			0x31e /* GPIO_A_3 */
+			MX93_PAD_GPIO_IO28__GPIO2_IO28			0x31e /* GPIO_A_4 */
+			MX93_PAD_GPIO_IO29__GPIO2_IO29			0x31e /* GPIO_A_5 */
+			MX93_PAD_GPIO_IO02__GPIO2_IO02			0x31e /* GPIO_B_1 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26			0x31e /* GPIO_A_6 */
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x31e /* GPIO_A_7 */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO3__GPIO4_IO28			0x31e /* GPIO_B_0 */
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL			0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL			0x40000b9e /* I2C_A_SCL */
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA			0x40000b9e /* I2C_A_SDA */
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO01__LPI2C3_SCL			0x40000b9e /* I2C_B_SCL */
+			MX93_PAD_GPIO_IO00__LPI2C3_SDA			0x40000b9e /* I2C_B_SDA */
+		>;
+	};
+
+	pinctrl_lpspi1: lpspi1grp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__LPSPI1_SIN			0x3fe /* SPI_A_SDI_(IO0) */
+			MX93_PAD_SAI1_RXD0__LPSPI1_SOUT			0x3fe /* SPI_A_SDO_(IO1) */
+			MX93_PAD_SAI1_TXD0__LPSPI1_SCK			0x3fe /* SPI_A_SCK */
+			MX93_PAD_SAI1_TXFS__GPIO1_IO11			0x3fe /* SPI_A_CS0# */
+		>;
+	};
+
+	pinctrl_lpspi8: lpspi8grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO13__LPSPI8_SIN			0x3fe /* SPI_B_SDI */
+			MX93_PAD_GPIO_IO14__LPSPI8_SOUT			0x3fe /* SPI_B_SDO */
+			MX93_PAD_GPIO_IO15__LPSPI8_SCK			0x3fe /* SPI_B_SCK */
+			MX93_PAD_GPIO_IO12__GPIO2_IO12			0x3fe /* SPI_B_CS0# */
+		>;
+	};
+
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e /* UART_CON_RX */
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e /* UART_CON_TX */
+		>;
+	};
+
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <
+			MX93_PAD_UART2_RXD__LPUART2_RX			0x31e /* UART_C_RX */
+			MX93_PAD_UART2_TXD__LPUART2_TX			0x31e /* UART_C_TX */
+		>;
+	};
+
+	pinctrl_lpuart6: lpuart6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO05__LPUART6_RX			0x31e /* UART_B_RX */
+			MX93_PAD_GPIO_IO04__LPUART6_TX			0x31e /* UART_B_TX */
+			MX93_PAD_GPIO_IO07__LPUART6_RTS_B		0x31e /* UART_B_CTS */
+			MX93_PAD_GPIO_IO06__LPUART6_CTS_B		0x31e /* UART_B_RTS */
+		>;
+	};
+
+	pinctrl_lpuart7: lpuart7grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO09__LPUART7_RX			0x31e /* UART_A_RX */
+			MX93_PAD_GPIO_IO08__LPUART7_TX			0x31e /* UART_A_TX */
+			MX93_PAD_GPIO_IO11__LPUART7_RTS_B		0x31e /* UART_A_CTS */
+			MX93_PAD_GPIO_IO10__LPUART7_CTS_B		0x31e /* UART_A_RTS */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vcc: regusdhc2vccgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07		0x31e /* SDIO_A_PWR_EN */
+		>;
+	};
+
+	pinctrl_reg_vdd_carrier: regvddcarriergrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO4__GPIO4_IO29			0x31e /* CARRIER_PWR_EN */
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_VSELECT__GPIO3_IO19		0x31e
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO20__SAI3_RX_DATA00		0x31e /* I2S_A_DATA_IN */
+			MX93_PAD_GPIO_IO19__SAI3_TX_DATA00		0x31e /* I2S_A_DATA_OUT */
+			MX93_PAD_GPIO_IO17__SAI3_MCLK			0x31e /* I2S_MCLK */
+			MX93_PAD_GPIO_IO26__SAI3_TX_SYNC		0x31e /* I2S_LRCLK */
+			MX93_PAD_GPIO_IO16__SAI3_TX_BCLK		0x31e /* I2S_BITCLK */
+		>;
+	};
+
+	pinctrl_tpm3: tpm3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO24__TPM3_CH3			0x57e /* PWM_0 */
+		>;
+	};
+
+	pinctrl_tpm4: tpm4grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO21__TPM4_CH1			0x57e /* PWM_2 */
+		>;
+	};
+
+	pinctrl_tpm6: tpm6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO23__TPM6_CH1			0x57e /* PWM_1 */
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x1582
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x40001382
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x40001382
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x40001382
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x40001382
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x40001382
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x40001382
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x40001382
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x40001382
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x40001382
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x1582
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x158e
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000138e
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x4000138e
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x4000138e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x4000138e
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x4000138e
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x4000138e
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x4000138e
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x4000138e
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x400013fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x400013fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x400013fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x400013fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x400013fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x400013fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x400013fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x400013fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x1582 /* SDIO_A_CLK */
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x40001382 /* SDIO_A_CMD */
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x40001382 /* SDIO_A_D0 */
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x40001382 /* SDIO_A_D1 */
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x40001382 /* SDIO_A_D2 */
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x40001382 /* SDIO_A_D3 */
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x158e /* SDIO_A_CLK */
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x4000138e /* SDIO_A_CMD */
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x4000138e /* SDIO_A_D0 */
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000138e /* SDIO_A_D1 */
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000138e /* SDIO_A_D2 */
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000138e /* SDIO_A_D3 */
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x15fe /* SDIO_A_CLK */
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x400013fe /* SDIO_A_CMD */
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x400013fe /* SDIO_A_D0 */
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x400013fe /* SDIO_A_D1 */
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x400013fe /* SDIO_A_D2 */
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x400013fe /* SDIO_A_D3 */
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00			0x31e /* SDIO_A_CD# */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK			0x1582 /* SDIO_B_CLK */
+			MX93_PAD_SD3_CMD__USDHC3_CMD			0x40001382 /* SDIO_B_CMD */
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0		0x40001382 /* SDIO_B_D0 */
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1		0x40001382 /* SDIO_B_D1 */
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2		0x40001382 /* SDIO_B_D2 */
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3		0x40001382 /* SDIO_B_D3 */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK			0x158e /* SDIO_B_CLK */
+			MX93_PAD_SD3_CMD__USDHC3_CMD			0x4000138e /* SDIO_B_CMD */
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0		0x4000138e /* SDIO_B_D0 */
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1		0x4000138e /* SDIO_B_D1 */
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2		0x4000138e /* SDIO_B_D2 */
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3		0x4000138e /* SDIO_B_D3 */
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK			0x15fe /* SDIO_B_CLK */
+			MX93_PAD_SD3_CMD__USDHC3_CMD			0x400013fe /* SDIO_B_CMD */
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0		0x400013fe /* SDIO_B_D0 */
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1		0x400013fe /* SDIO_B_D1 */
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2		0x400013fe /* SDIO_B_D2 */
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3		0x400013fe /* SDIO_B_D3 */
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-peb-wlbt-07.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-peb-wlbt-07.dtso
new file mode 100644
index 000000000000..7381b87444e8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-peb-wlbt-07.dtso
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Primoz Fiser <primoz.fiser@norik.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx93-pinfunc.h"
+
+&{/} {
+	usdhc3_pwrseq: usdhc3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&lpuart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+/*
+ * NOTE: When uSDHC3 port is multiplexed on GPIO_IO[27:22] pads, it only
+ * supports 50 MHz mode, due to introduction of potential variations in
+ * trace impedance, drive strength, and timing skew. Refer to i.MX 93
+ * Application Processors Data Sheet, Rev. 3, page 60 for more details.
+ */
+&usdhc3 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wlbt>;
+	pinctrl-1 = <&pinctrl_usdhc3_sleep>, <&pinctrl_wlbt>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX	0x31e
+			MX93_PAD_DAP_TDI__LPUART5_RX		0x31e
+			MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B	0x31e
+			MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B	0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__USDHC3_CLK		0x179e
+			MX93_PAD_SD3_CMD__USDHC3_CMD 		0x4000178e
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x4000138e
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x4000138e
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x4000138e
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x4000138e
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3sleepgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__USDHC3_CLK		0x31e
+			MX93_PAD_SD3_CMD__USDHC3_CMD 		0x31e
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x31e
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x31e
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x31e
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x31e
+		>;
+	};
+
+	pinctrl_wlbt: wlbtgrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27		0x31e	/* WAKE_DEV */
+			MX93_PAD_CCM_CLKO3__GPIO4_IO28		0x31e	/* WAKE_HOST */
+			MX93_PAD_CCM_CLKO4__GPIO4_IO29		0x31e	/* PDn */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts
new file mode 100644
index 000000000000..5599e296919f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Primoz Fiser <primoz.fiser@norik.com>
+ *
+ * Product homepage:
+ * https://www.phytec.eu/en/produkte/development-kits/phyboard-nash/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx93-phycore-som.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Nash-i.MX93";
+	compatible = "phytec,imx93-phyboard-nash", "phytec,imx93-phycore-som",
+		     "fsl,imx93";
+
+	aliases {
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &i2c_rtc;
+		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		spi0 = &lpspi1;
+		spi1 = &lpspi2;
+		spi2 = &lpspi3;
+		spi3 = &lpspi4;
+		spi4 = &lpspi5;
+		spi5 = &lpspi6;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	curr_sens: current-sense {
+		compatible = "current-sense-amplifier";
+		#io-channel-cells = <0>;
+		io-channels = <&adc1 1>;
+		sense-gain-div = <2>;
+		sense-gain-mult = <50>;
+		sense-resistor-micro-ohms = <35000>;
+	};
+
+	flexcan1_tc: can-phy0 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_tc>;
+		standby-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&curr_sens 0>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VCC_SD";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+	};
+
+	reg_vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+	};
+};
+
+/* ADC */
+&adc1 {
+	status = "okay";
+};
+
+/* Ethernet */
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy2>;
+	status = "okay";
+};
+
+&mdio {
+	ethphy2: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_75_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+/* CAN */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	phys = <&flexcan1_tc>;
+	status = "okay";
+};
+
+/* I2C2 */
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	/* RTC */
+	i2c_rtc: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		trickle-resistor-ohms = <3000>;
+		wakeup-source;
+	};
+
+	/* EEPROM */
+	eeprom@54 {
+		compatible = "atmel,24c32";
+		reg = <0x54>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc_1v8>;
+	};
+};
+
+/* SPI6 */
+&lpspi6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi6>;
+	cs-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	/* TPM */
+	tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* RS-232/RS-485 */
+&lpuart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	status = "okay";
+};
+
+/* USB */
+&usbotg1 {
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0	0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1	0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2	0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3	0x57e
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0	0x51e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1	0x51e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2	0x50e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3	0x50e
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x50e
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x1002
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+			MX93_PAD_PDM_CLK__CAN1_TX		0x1382
+		>;
+	};
+
+	pinctrl_flexcan1_tc: flexcan1tcgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_TD3__GPIO4_IO16		0x31e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL		0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpspi6: lpspi6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO00__GPIO2_IO00		0x386
+			MX93_PAD_GPIO_IO01__LPSPI6_SIN		0x3fe
+			MX93_PAD_GPIO_IO02__LPSPI6_SOUT		0x386
+			MX93_PAD_GPIO_IO03__LPSPI6_SCK		0x386
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_RD2__GPIO4_IO26		0x31e
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO17__GPIO2_IO17		0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x30e
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO08__LPUART7_TX		0x30e
+			MX93_PAD_GPIO_IO09__LPUART7_RX		0x31e
+			MX93_PAD_GPIO_IO10__LPUART7_CTS_B	0x31e
+			MX93_PAD_GPIO_IO11__LPUART7_RTS_B	0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_default: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000178e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x40001386
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x40001386
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x40001386
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000138e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x400013be
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso
new file mode 100644
index 000000000000..a20898734741
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Andrej Picej <andrej.picej@norik.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx93-pinfunc.h"
+
+&{/} {
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		button-s2 {
+			label = "sleep";
+			linux,code = <KEY_SLEEP>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>;
+
+		user-led2 {
+			gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10	0x31e
+		>;
+	};
+
+	pinctrl_user_leds: userledsgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_RD3__GPIO4_IO13		0x31e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-wlbt-05.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-wlbt-05.dtso
new file mode 100644
index 000000000000..a7285f009566
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-wlbt-05.dtso
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Andrej Picej <andrej.picej@norik.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx93-pinfunc.h"
+
+&{/} {
+	usdhc3_pwrseq: usdhc3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <60>;
+		reset-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&lpuart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+	};
+};
+
+&usdhc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wlbt>;
+	pinctrl-1 = <&pinctrl_usdhc3_sleep>, <&pinctrl_wlbt>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+
+	brmcf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX	0x31e
+			MX93_PAD_DAP_TDI__LPUART5_RX		0x31e
+			MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B	0x31e
+			MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B	0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__USDHC3_CLK		0x179e
+			MX93_PAD_GPIO_IO23__USDHC3_CMD		0x4000139e
+			MX93_PAD_GPIO_IO24__USDHC3_DATA0	0x4000139e
+			MX93_PAD_GPIO_IO25__USDHC3_DATA1	0x4000139e
+			MX93_PAD_GPIO_IO26__USDHC3_DATA2	0x4000139e
+			MX93_PAD_GPIO_IO27__USDHC3_DATA3	0x4000139e
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3sleepgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__USDHC3_CLK		0x31e
+			MX93_PAD_GPIO_IO23__USDHC3_CMD		0x31e
+			MX93_PAD_GPIO_IO24__USDHC3_DATA0	0x31e
+			MX93_PAD_GPIO_IO25__USDHC3_DATA1	0x31e
+			MX93_PAD_GPIO_IO26__USDHC3_DATA2	0x31e
+			MX93_PAD_GPIO_IO27__USDHC3_DATA3	0x31e
+		>;
+	};
+
+	pinctrl_wlbt: wlbtgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_RD3__GPIO4_IO13		0x31e	/* BT ENABLE */
+			MX93_PAD_ENET1_TXC__GPIO4_IO07		0x31e	/* WLAN ENABLE */
+			MX93_PAD_I2C1_SCL__GPIO1_IO00		0x31e	/* HOST WAKEUP */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
new file mode 100644
index 000000000000..802d96b19e4c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>, Christoph Stoidner <c.stoidner@phytec.de>
+ * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
+ *
+ * Product homepage:
+ * phyBOARD-Segin carrier board is reused for the i.MX93 design.
+ * https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/
+ */
+/dts-v1/;
+
+#include "imx93-phycore-som.dtsi"
+
+/{
+	model = "PHYTEC phyBOARD-Segin-i.MX93";
+	compatible = "phytec,imx93-phyboard-segin", "phytec,imx93-phycore-som",
+		     "fsl,imx93";
+
+	aliases {
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &i2c_rtc;
+		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	flexcan1_tc: can-phy0 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <1000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_tc>;
+		enable-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_sound_1v8: regulator-sound-1v8 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VCC1V8_AUDIO";
+	};
+
+	reg_sound_3v3: regulator-sound-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCC3V3_ANALOG";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VCC_SD";
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT",
+			"Speaker", "SPOP",
+			"Speaker", "SPOM",
+			"LINE1L", "Line In",
+			"LINE1R", "Line In";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&audio_codec>;
+			clocks = <&clk IMX93_CLK_SAI1>;
+		};
+	};
+};
+
+/* Ethernet */
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+	assigned-clock-rates = <100000000>, <50000000>;
+	status = "okay";
+};
+
+&mdio {
+	ethphy2: ethernet-phy@2 {
+		compatible = "ethernet-phy-id0022.1561";
+		reg = <2>;
+		clocks = <&clk IMX93_CLK_ENET_REF_PHY>;
+		clock-names = "rmii-ref";
+		micrel,led-mode = <1>;
+	};
+};
+
+/* CAN */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	phys = <&flexcan1_tc>;
+	status = "okay";
+};
+
+/* I2C2 */
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	/* Codec */
+	audio_codec: audio-codec@18 {
+		compatible = "ti,tlv320aic3007";
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&reg_sound_3v3>;
+		IOVDD-supply = <&reg_sound_3v3>;
+		DRVDD-supply = <&reg_sound_3v3>;
+		DVDD-supply = <&reg_sound_1v8>;
+	};
+
+	/* RTC */
+	i2c_rtc: rtc@68 {
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* Audio */
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clk IMX93_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <19200000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+/* USB  */
+&usbotg1 {
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
+	bus-width = <4>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK	0x4000050e
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0		0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1		0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0		0x50e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1		0x50e
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x50e
+			MX93_PAD_ENET1_RXC__ENET_QOS_RX_ER		0x57e
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+			MX93_PAD_PDM_CLK__CAN1_TX		0x139e
+		>;
+	};
+
+	pinctrl_flexcan1_tc: flexcan1tcgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_TD3__GPIO4_IO16		0x31e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL		0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_RD2__GPIO4_IO26		0x31e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX93_PAD_UART2_RXD__SAI1_MCLK		0x1202
+			MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC	0x1202
+			MX93_PAD_SAI1_TXC__SAI1_TX_BCLK		0x1202
+			MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00	0x1402
+			MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00	0x1402
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x30e
+		>;
+	};
+
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_default: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-rpmsg.dtso b/arch/arm64/boot/dts/freescale/imx93-phycore-rpmsg.dtso
new file mode 100644
index 000000000000..23bede7833f8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-rpmsg.dtso
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Primoz Fiser <primoz.fiser@norik.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		rsc_table: rsc-table@2021e000 {
+			reg = <0 0x2021e000 0 0x1000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@a4000000 {
+			reg = <0 0xa4000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@a4008000 {
+			reg = <0 0xa4008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@a4010000 {
+			reg = <0 0xa4010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@a4018000 {
+			reg = <0 0xa4018000 0 0x8000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@a4020000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4020000 0 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&cm33 {
+	mbox-names = "tx", "rx", "rxdb";
+	mboxes = <&mu1 0 1>,
+		 <&mu1 1 1>,
+		 <&mu1 3 1>;
+	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+		 <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	status = "okay";
+};
+
+&mu1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
new file mode 100644
index 000000000000..3f069905cf0b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>, Christoph Stoidner <c.stoidner@phytec.de>
+ * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
+ *
+ * Product homepage:
+ * https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/
+ */
+
+#include <dt-bindings/leds/common.h>
+
+#include "imx93.dtsi"
+
+/{
+	model = "PHYTEC phyCORE-i.MX93";
+	compatible = "phytec,imx93-phycore-som", "fsl,imx93";
+
+	aliases {
+		ethernet0 = &fec;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vdda_1v8: regulator-vdda-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDA_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&buck5>;
+	};
+};
+
+/* ADC */
+&adc1 {
+	vref-supply = <&reg_vdda_1v8>;
+};
+
+/* Ethernet */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
+			  <&clk IMX93_CLK_ENET_REF>,
+			  <&clk IMX93_CLK_ENET_REF_PHY>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+	assigned-clock-rates = <100000000>, <50000000>, <50000000>;
+	status = "okay";
+
+	mdio: mdio {
+		clock-frequency = <5000000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+			reset-assert-us = <30>;
+		};
+	};
+};
+
+/* I2C3 */
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "VDD_SOC";
+				regulator-min-microvolt = <610000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "VDDQ_0V6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <600000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "VDD_3V3_BUCK";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "VDD_1V1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "PMIC_SNVS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "VDD_0V8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "NVCC_SD2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	/* EEPROM */
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&buck4>;
+	};
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+/* Watchdog */
+&wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x50e
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x502
+			/* the three pins below are connected to PHYs straps,
+			 * that is what the pull-up/down setting is for.
+			 */
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x37e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x37e
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x50e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x50e
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x50e
+			MX93_PAD_ENET2_TD2__ENET1_TX_CLK		0x4000050e
+			MX93_PAD_ENET2_RXC__GPIO4_IO23			0x51e
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SDA__GPIO1_IO01		0x11e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA		0x40000b9e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_RD3__GPIO4_IO27		0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x179e
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x40001386
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x40001386
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x4000138e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x40001386
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x40001386
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x40001386
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x40001386
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x40001386
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x179e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x17be
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000139e
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x4000139e
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013be
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x4000139e
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x4000139e
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x4000139e
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x4000139e
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x4000139e
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x179e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x17be
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000139e
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000139e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x400013be
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013be
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x400013be
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x400013be
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x400013be
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x400013be
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x400013be
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x179e
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY	0x31e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-pinfunc.h b/arch/arm64/boot/dts/freescale/imx93-pinfunc.h
index 4298a145f8a9..4298a145f8a9 100755..100644
--- a/arch/arm64/boot/dts/freescale/imx93-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx93-pinfunc.h
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
new file mode 100644
index 000000000000..2673d9dccbf4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
@@ -0,0 +1,760 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx93-tqma9352.dtsi"
+
+/{
+	model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA on MBa91xxCA starter kit";
+	compatible = "tq,imx93-tqma9352-mba91xxca", "tq,imx93-tqma9352", "fsl,imx93";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom0;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &pcf85063;
+		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm2 2 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	display: display {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+			};
+		};
+	};
+
+	fan0: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&expander2 4 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0 0>, <10000 1>;
+		fan-supply = <&reg_12v0>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+	};
+
+	lvds_encoder: lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+		powerdown-gpios = <&expander2 3 GPIO_ACTIVE_LOW>;
+		power-supply = <&reg_3v3>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+				};
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0_MB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_1v5: regulator-mpcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_MPCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_mpcie_3v3: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MPCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu_active: trip-active0 {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&cpu_active>;
+					cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_fec>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "PMIC_IRQ#",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "USB_C_ALERT#", "BM2_LCD_INT#",
+		/* 12 */ "PEX_INT#", "", "RTC_EVENT#", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		/* 00 */ "SD2_CD#", "", "", "",
+		/* 04 */ "", "", "", "SD2_RST#",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "ENET1_INT#", "ENET2_INT#",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	ptn5110: usb-typec@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "X17";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			typec-power-opmode = "default";
+			pd-disable;
+			self-powered;
+
+			port {
+				typec_con_hs: endpoint {
+					remote-endpoint = <&typec_hs>;
+				};
+			};
+		};
+	};
+
+	eeprom2: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander0: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pexp_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "TEMP_EVENT_MOD#", "MPCIE_WAKE#",
+				  "MPCIE_1V5_EN", "MPCIE_3V3_EN",
+				  "MPCIE_PERST#", "MPCIE_WDISABLE#",
+				  "BUTTON_A#", "BUTTON_B#";
+
+		temp-event-mod-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "TEMP_EVENT_MOD#";
+		};
+
+		mpcie-wake-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "MPCIE_WAKE#";
+		};
+
+		/*
+		 * Controls the mPCIE slot reset which is low active as
+		 * reset signal. The output-low states, the signal is
+		 * inactive, e.g. not in reset
+		 */
+		mpcie_rst_hog: mpcie-rst-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_PERST#";
+		};
+
+		/*
+		 * Controls the mPCIE slot WDISABLE pin which is low active
+		 * as disable signal. The output-low states, the signal is
+		 * inactive, e.g. not disabled
+		 */
+		mpcie_wdisable_hog: mpcie-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_WDISABLE#";
+		};
+	};
+
+	expander1: gpio@71 {
+		compatible = "nxp,pca9538";
+		reg = <0x71>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+				  "USB_RESET#", "",
+				  "WLAN_PD#", "WLAN_W_DISABLE#",
+				  "WLAN_PERST#", "12V_EN";
+
+		/*
+		 * Controls the WiFi card PD pin which is low active
+		 * as power down signal. The output-low states, the signal
+		 * is inactive, e.g. not power down
+		 */
+		wlan-pd-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PD#";
+		};
+
+		/*
+		 * Controls the WiFi card disable pin which is low active
+		 * as disable signal. The output-low states, the signal
+		 * is inactive, e.g. not disabled
+		 */
+		wlan-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_W_DISABLE#";
+		};
+
+		/*
+		 * Controls the WiFi card reset pin which is low active
+		 * as reset signal. The output-low states, the signal
+		 * is inactive, e.g. not in reset
+		 */
+		wlan-perst-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PERST#";
+		};
+	};
+
+	expander2: gpio@72 {
+		compatible = "nxp,pca9538";
+		reg = <0x72>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+				  "LCD_BLT_EN", "LVDS_SHDN#",
+				  "FAN_PWR_EN", "",
+				  "USER_LED1", "USER_LED2";
+	};
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&pcf85063 {
+	/* RTC_EVENT# from SoM is connected on mainboard */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&se97_som {
+	/* TEMP_EVENT# from SoM is connected on mainboard */
+	interrupt-parent = <&expander0>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&tpm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb424,2517";
+		reg = <1>;
+		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = /* PD | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET1_MDC__ENET_QOS_MDC				0x51e>,
+			   /* SION | HYS | ODE | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO				0x4000111e>,
+			   /* HYS | FSEL_0 | DSE no drive */
+			   <MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x1000>,
+			   <MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x1000>,
+			   <MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x1000>,
+			   <MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x1000>,
+			   <MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x1000>,
+			   /* HYS | PD | FSEL_0 | DSE no drive */
+			   <MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x1400>,
+			   /* PD | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x51e>,
+			   <MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x51e>,
+			   <MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x51e>,
+			   <MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x51e>,
+			   <MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x51e>,
+			   /* PD | FSEL_3 | DSE X3 */
+			   <MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = /* HYS | FSEL_0 | DSE no drive */
+			   <MX93_PAD_CCM_CLKO1__GPIO3_IO26			0x1000>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = /* PD | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET2_MDC__ENET1_MDC			0x51e>,
+			   /* SION | HYS | ODE | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000111e>,
+			   /* HYS | FSEL_0 | DSE no drive */
+			   <MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0			0x1000>,
+			   <MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1			0x1000>,
+			   <MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2			0x1000>,
+			   <MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3			0x1000>,
+			   <MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL		0x1000>,
+			   /* HYS | PD | FSEL_0 | DSE no drive */
+			   <MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC			0x1400>,
+			   /* PD | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0			0x51e>,
+			   <MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1			0x51e>,
+			   <MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2			0x51e>,
+			   <MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3			0x51e>,
+			   <MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL		0x51e>,
+			   /* PD | FSEL_3 | DSE X3 */
+			   <MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC			0x58e>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = /* HYS | FSEL_0 | DSE no drive */
+			   <MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x1000>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = /* HYS | PU | FSEL_0 | DSE no drive */
+			   <MX93_PAD_PDM_BIT_STREAM0__CAN1_RX		0x1200>,
+			   /* PU | FSEL_3 | DSE X4 */
+			   <MX93_PAD_PDM_CLK__CAN1_TX			0x039e>;
+	};
+
+	pinctrl_jtag: jtaggrp {
+		fsl,pins = <MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK	0x051e>,
+			   <MX93_PAD_DAP_TDI__JTAG_MUX_TDI		0x1200>,
+			   <MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO	0x031e>,
+			   <MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS	0x1200>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = /* SION | HYS | OD | FSEL_3 | DSE X4 */
+			   <MX93_PAD_GPIO_IO28__LPI2C3_SDA		0x4000199e>,
+			   <MX93_PAD_GPIO_IO29__LPI2C3_SCL		0x4000199e>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <MX93_PAD_SAI1_RXD0__GPIO1_IO14		0x1000>;
+	};
+
+	pinctrl_pexp_irq: pexpirqgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_SAI1_TXC__GPIO1_IO12		0x1000>;
+	};
+
+	pinctrl_rgbdisp: rgbdispgrp {
+		fsl,pins = <MX93_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK	0x31e>,
+			   <MX93_PAD_GPIO_IO01__MEDIAMIX_DISP_DE	0x31e>,
+			   <MX93_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC	0x31e>,
+			   <MX93_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC	0x31e>,
+			   <MX93_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA00	0x31e>,
+			   <MX93_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA01	0x31e>,
+			   <MX93_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA02	0x31e>,
+			   <MX93_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA03	0x31e>,
+			   <MX93_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA04	0x31e>,
+			   <MX93_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA05	0x31e>,
+			   <MX93_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA06	0x31e>,
+			   <MX93_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA07	0x31e>,
+			   <MX93_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA08	0x31e>,
+			   <MX93_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA09	0x31e>,
+			   <MX93_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10	0x31e>,
+			   <MX93_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11	0x31e>,
+			   <MX93_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12	0x31e>,
+			   <MX93_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13	0x31e>,
+			   <MX93_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14	0x31e>,
+			   <MX93_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15	0x31e>,
+			   <MX93_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16	0x31e>,
+			   <MX93_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17	0x31e>,
+			   <MX93_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18	0x31e>,
+			   <MX93_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19	0x31e>,
+			   <MX93_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20	0x31e>,
+			   <MX93_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21	0x31e>,
+			   <MX93_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22	0x31e>,
+			   <MX93_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23	0x31e>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_SAI1_TXFS__GPIO1_IO11		0x1000>;
+	};
+
+	pinctrl_tpm2: tpm2grp {
+		fsl,pins = <MX93_PAD_I2C2_SCL__TPM2_CH2			0x57e>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10	0x1000>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_UART1_RXD__LPUART1_RX		0x1000>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX93_PAD_UART1_TXD__LPUART1_TX		0x011e>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_UART2_RXD__LPUART2_RX		0x1000>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX93_PAD_UART2_TXD__LPUART2_TX		0x011e>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX93_PAD_SAI1_TXD0__LPUART2_RTS_B		0x011e>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_SD2_CD_B__GPIO3_IO00		0x1000>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_hs: usdhc2hsgrp {
+		fsl,pins = /* PD | FSEL_3 | DSE X5 */
+			   <MX93_PAD_SD2_CLK__USDHC2_CLK		0x05be>,
+			   /* HYS | PU | FSEL_3 | DSE X4 */
+			   <MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e>,
+			   /* HYS | PU | FSEL_3 | DSE X3 */
+			   <MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x4000138e>,
+			   <MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000138e>,
+			   <MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000138e>,
+			   <MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000138e>,
+			   /* FSEL_2 | DSE X3 */
+			   <MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x010e>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+		fsl,pins = /* PD | FSEL_3 | DSE X6 */
+			   <MX93_PAD_SD2_CLK__USDHC2_CLK		0x05fe>,
+			   /* HYS | PU | FSEL_3 | DSE X4 */
+			   <MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e>,
+			   <MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x4000139e>,
+			   <MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000139e>,
+			   <MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000139e>,
+			   <MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000139e>,
+			   /* FSEL_2 | DSE X3 */
+			   <MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x010e>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
new file mode 100644
index 000000000000..4760d07ea24b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
@@ -0,0 +1,930 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+
+#include "imx93-tqma9352.dtsi"
+
+/{
+	model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA on MBa93xxCA starter kit";
+	compatible = "tq,imx93-tqma9352-mba93xxca",
+		     "tq,imx93-tqma9352", "fsl,imx93";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom0;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &pcf85063;
+		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		serial7 = &lpuart8;
+		spi0 = &lpspi1;
+		spi1 = &lpspi2;
+		spi2 = &lpspi3;
+		spi3 = &lpspi4;
+		spi4 = &lpspi5;
+		spi5 = &lpspi6;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm5 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwmfan>;
+		fan-supply = <&reg_pwm_fan>;
+		#cooling-cells = <2>;
+		/* typical 25 kHz -> 40.000 nsec */
+		pwms = <&tpm6 0 40000 PWM_POLARITY_INVERTED>;
+		cooling-levels = <0 32 64 128 196 240>;
+		pulses-per-revolution = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0_MB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_1v5: regulator-mpcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_MPCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_3v3: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MPCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pwm_fan: regulator-pwm-fan {
+		compatible = "regulator-fixed";
+		regulator-name = "FAN_PWR";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_12v0>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu_active0: trip-active0 {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+
+				cpu_active1: trip-active1 {
+					temperature = <48000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+
+				cpu_active2: trip-active2 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&cpu_active0>;
+					cooling-device = <&fan0 1 1>;
+				};
+
+				map2 {
+					trip = <&cpu_active1>;
+					cooling-device = <&fan0 2 2>;
+				};
+
+				map3 {
+					trip = <&cpu_active2>;
+					cooling-device = <&fan0 3 3>;
+				};
+			};
+		};
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_fec>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* 00 */ "", "", "USB_C_ALERT#", "PMIC_IRQ#",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "BM2_TEMP_EVENT_MOD#",
+		/* 12 */ "PEX_INT#", "", "RTC_EVENT#", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+
+	expander-irq-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "PEX_INT#";
+	};
+
+	tcpc-irq-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "USB_C_ALERT#";
+	};
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>;
+
+	gpio-line-names =
+		/* 00 */ "SPI6_PCS0#", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "FAN_RPM", "MIPI_CSI_TRIGGER", "MIPI_CSI_SYNC",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "X1_11", "X1_21", "X1_17", "X1_13",
+		/* 20 */ "X1_15", "X1_9", "", "",
+		/* 24 */ "", "", "X1_7", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		/* 00 */ "SD2_CD#", "", "", "",
+		/* 04 */ "", "", "", "SD2_RST#",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "ENET1_INT#", "ENET2_INT#",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "DP_INT", "", "";
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	ptn5110: usb-typec@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "X17";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			typec-power-opmode = "default";
+			pd-disable;
+			self-powered;
+
+			port {
+				typec_con_hs: endpoint {
+					remote-endpoint = <&typec_hs>;
+				};
+			};
+		};
+	};
+
+	eeprom2: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander0: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pexp_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "FAN_PWR_EN", "MPCIE_WAKE#",
+				  "MPCIE_1V5_EN", "MPCIE_3V3_EN",
+				  "MPCIE_PERST#", "MPCIE_WDISABLE#",
+				  "BUTTON_A#", "BUTTON_B#";
+
+		mpcie-wake-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "MPCIE_WAKE#";
+		};
+
+		/*
+		 * Controls the mPCIE slot reset which is low active as
+		 * reset signal. The output-low states, the signal is
+		 * inactive, e.g. not in reset
+		 */
+		mpcie_rst_hog: mpcie-rst-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_PERST#";
+		};
+
+		/*
+		 * Controls the mPCIE slot WDISABLE pin which is low active
+		 * as disable signal. The output-low states, the signal is
+		 * inactive, e.g. not disabled
+		 */
+		mpcie_wdisable_hog: mpcie-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_WDISABLE#";
+		};
+	};
+
+	expander1: gpio@71 {
+		compatible = "nxp,pca9538";
+		reg = <0x71>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+				  "USB_RESET#", "",
+				  "WLAN_PD#", "WLAN_W_DISABLE#",
+				  "WLAN_PERST#", "12V_EN";
+
+		/*
+		 * Controls the WiFi card's low-active power down pin.
+		 * The output-low states, the signal is inactive,
+		 * resulting in high signal at power-down pin
+		 */
+		wlan-pd-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PD#";
+		};
+
+		/*
+		 * Controls the WiFi card's low-active disable pin.
+		 * The output-low states, the signal is inactive,
+		 * resulting in high signal at power-down pin
+		 */
+		wlan-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_W_DISABLE#";
+		};
+
+		/*
+		 * Controls the WiFi card's reset pin.
+		 * The output-low states, the signal is inactive,
+		 * resulting in high signal at power-down pin
+		 */
+		wlan-perst-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PERST#";
+		};
+	};
+
+	expander2: gpio@72 {
+		compatible = "nxp,pca9538";
+		reg = <0x72>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+				  "LCD_BLT_EN", "DP_EN",
+				  "MIPI_CSI_EN", "MIPI_CSI_RST#",
+				  "USER_LED1", "USER_LED2";
+	};
+};
+
+&lpi2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	pinctrl-1 = <&pinctrl_lpi2c5>;
+	status = "okay";
+};
+
+&lpspi6 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpspi6>;
+	pinctrl-1 = <&pinctrl_lpspi6>;
+	status = "okay";
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* disabled per default, console for M33 */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "disabled";
+};
+
+&lpuart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&lpuart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	status = "okay";
+};
+
+&pcf85063 {
+	/* RTC_EVENT# from SoM is connected on mainboard */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&se97_som {
+	/* TEMP_EVENT# from SoM is connected on mainboard */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_temp_sensor_som>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&tpm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm5>;
+};
+
+&tpm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm6>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	hub_2_0: usb-hub@1 {
+		compatible = "usb424,2517";
+		reg = <1>;
+		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x51e
+			/* SION | HYS | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x4000111e
+			/* HYS | FSEL_0 | DSE no drive */
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x1000
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x1000
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x1000
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x1000
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x1000
+			/* HYS | PD | FSEL_0 | DSE no drive */
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x1400
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x51e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x51e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x51e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x51e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x51e
+			/* PD | FSEL_3 | DSE X3 */
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+		>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | DSE no drive */
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26			0x1000
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x51e
+			/* SION | HYS | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000111e
+			/* HYS | FSEL_0 | DSE no drive */
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x1000
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x1000
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x1000
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x1000
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x1000
+			/* HYS | PD | FSEL_0 | DSE no drive */
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x1400
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x51e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x51e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x51e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x51e
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x51e
+			/* PD | FSEL_3 | DSE X3 */
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x58e
+		>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | DSE no drive */
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x1000
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			/* HYS | PU | FSEL_0 | DSE no drive */
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX		0x1200
+			/* PU | FSEL_3 | DSE X4 */
+			MX93_PAD_PDM_CLK__CAN1_TX			0x039e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			/* HYS | PU | FSEL_0 | DSE no drive */
+			MX93_PAD_GPIO_IO27__CAN2_RX			0x1200
+			/* PU | FSEL_3 | DSE X4 */
+			MX93_PAD_GPIO_IO25__CAN2_TX			0x039e
+		>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <
+			/* HYS | PD | FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO16__GPIO2_IO16			0x151e
+			MX93_PAD_GPIO_IO17__GPIO2_IO17			0x151e
+			MX93_PAD_GPIO_IO18__GPIO2_IO18			0x151e
+			MX93_PAD_GPIO_IO19__GPIO2_IO19			0x151e
+			MX93_PAD_GPIO_IO20__GPIO2_IO20			0x151e
+			MX93_PAD_GPIO_IO21__GPIO2_IO21			0x151e
+			MX93_PAD_GPIO_IO26__GPIO2_IO26			0x151e
+		>;
+	};
+
+	pinctrl_jtag: jtaggrp {
+		fsl,pins = <
+			MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK		0x051e
+			MX93_PAD_DAP_TDI__JTAG_MUX_TDI			0x1200
+			MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO		0x031e
+			MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS		0x1200
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			/* SION | HYS | OD | FSEL_3 | DSE X4 */
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA			0x4000199e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL			0x4000199e
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			/* SION | HYS | OD | FSEL_3 | DSE X4 */
+			MX93_PAD_GPIO_IO22__LPI2C5_SDA			0x4000199e
+			MX93_PAD_GPIO_IO23__LPI2C5_SCL			0x4000199e
+		>;
+	};
+
+	pinctrl_lpspi6: lpspi6grp {
+		fsl,pins = <
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO00__LPSPI6_PCS0			0x011e
+			/* HYS | PD | FSEL_0 | DSE no drive */
+			MX93_PAD_GPIO_IO01__LPSPI6_SIN			0x1400
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO02__LPSPI6_SOUT			0x051e
+			MX93_PAD_GPIO_IO03__LPSPI6_SCK			0x051e
+		>;
+	};
+
+	pinctrl_mipi_csi: mipicsigrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3		0x051e /* MCLK */
+			MX93_PAD_GPIO_IO10__GPIO2_IO10			0x051e /* TRIGGER */
+			MX93_PAD_GPIO_IO11__GPIO2_IO11			0x1400 /* SYNC */
+		>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <
+			MX93_PAD_SAI1_RXD0__GPIO1_IO14			0x1000
+		>;
+	};
+
+	pinctrl_pexp_irq: pexpirqgrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_SAI1_TXC__GPIO1_IO12			0x1000
+		>;
+	};
+
+	pinctrl_pwmfan: pwmfangrp {
+		fsl,pins = <
+			/* HYS | PU | FSEL_0 | no DSE */
+			MX93_PAD_GPIO_IO09__GPIO2_IO09			0x1200
+		>;
+	};
+
+	pinctrl_tc9595: tc9595-grp {
+		fsl,pins = <
+			/* HYS | PD | FSEL_0 | no DSE */
+			MX93_PAD_CCM_CLKO4__GPIO4_IO29			0x1400
+		>;
+	};
+
+	pinctrl_temp_sensor_som: tempsensorsomgrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | no DSE */
+			MX93_PAD_SAI1_TXFS__GPIO1_IO11			0x1000
+		>;
+	};
+
+	pinctrl_tpm5: tpm5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO06__TPM5_CH0			0x57e
+		>;
+	};
+
+	pinctrl_tpm6: tpm6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO08__TPM6_CH0			0x57e
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_I2C2_SCL__GPIO1_IO02			0x1000
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x011e
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_UART2_RXD__LPUART2_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_UART2_TXD__LPUART2_TX			0x011e
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B		0x011e
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_GPIO_IO15__LPUART3_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO14__LPUART3_TX			0x011e
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_GPIO_IO05__LPUART6_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO04__LPUART6_TX			0x011e
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_GPIO_IO13__LPUART8_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO12__LPUART8_TX			0x011e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_SD2_CD_B__GPIO3_IO00			0x1000
+		>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_hs: usdhc2hsgrp {
+		fsl,pins = <
+			/* PD | FSEL_3 | DSE X5 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x05be
+			/* HYS | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x4000139e
+			/* HYS | PU | FSEL_3 | DSE X3 */
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000138e
+			/* FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x010e
+		>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+		fsl,pins = <
+			/* PD | FSEL_3 | DSE X6 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x05fe
+			/* HYS | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x4000139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000139e
+			/* FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x010e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
new file mode 100644
index 000000000000..8a88c98ac05a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -0,0 +1,892 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx93-tqma9352.dtsi"
+
+/{
+	model = "TQ-Systems i.MX93 TQMa93xxLA on MBa93xxLA SBC";
+	compatible = "tq,imx93-tqma9352-mba93xxla",
+		     "tq,imx93-tqma9352", "fsl,imx93";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom0;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &pcf85063;
+		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		serial7 = &lpuart8;
+		spi0 = &lpspi1;
+		spi1 = &lpspi2;
+		spi2 = &lpspi3;
+		spi3 = &lpspi4;
+		spi4 = &lpspi5;
+		spi5 = &lpspi6;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm5 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	clk_dp: clk-dp {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_3v8: regulator-3v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V8";
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/* TODO: this is supply for IOT module */
+		regulator-always-on;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0_MB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_fec>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* 00 */ "", "", "USB_C_ALERT#", "PMIC_IRQ#",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "BM2_TEMP_EVENT_MOD#",
+		/* 12 */ "PEX_INT#", "", "RTC_EVENT#", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+
+	expander-irq-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "PEX_INT#";
+	};
+
+	rtc-irq-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "RTC_EVENT#";
+	};
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>;
+
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "AFE_RESET#",
+		/* 08 */ "AFE_SYNC", "AFE_DRDY", "MIPI_CSI_TRIGGER", "MIPI_CSI_SYNC",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "X1_19", "X1_29", "X1_25", "X1_21",
+		/* 20 */ "X1_23", "X1_17", "", "",
+		/* 24 */ "AFE_INT#", "", "X1_15", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		/* 00 */ "SD2_CD#", "", "", "",
+		/* 04 */ "", "", "", "SD2_RST#",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "ENET1_INT#", "ENET2_INT#",
+		/* 28 */ "", "", "", "";
+
+	ethphy-eqos-irq-hog {
+		gpio-hog;
+		gpios = <26 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "ENET1_INT#";
+	};
+
+	ethphy-fec-irq-hog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "ENET2_INT#";
+	};
+};
+
+&gpio4 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "DP_INT", "", "";
+
+	dp-int-hog {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "DP_INT";
+	};
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	ptn5110: usb-typec@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "X17";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			typec-power-opmode = "default";
+			pd-disable;
+			self-powered;
+
+			port {
+				typec_con_hs: endpoint {
+					remote-endpoint = <&typec_hs>;
+				};
+			};
+		};
+	};
+
+	eeprom2: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander0: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pexp_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "3V8_EN", "",
+				  "", "IOT_PWRKEY",
+				  "IOT_RESET", "IOT_W_DISABLE",
+				  "BUTTON_A#", "BUTTON_B#";
+
+		/*
+		 * Controls the IOT W_DISABLE pin which is low active
+		 * as disable signal but inverted as seen from the CPU.
+		 * The output-low states, the signal is
+		 * inactive, e.g. not disabled
+		 */
+		iot_wdisable_hog: iot-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "IOT_W_DISABLE";
+		};
+	};
+
+	expander1: gpio@71 {
+		compatible = "nxp,pca9538";
+		reg = <0x71>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+				  "USB_RESET#", "",
+				  "WLAN_PD#", "WLAN_W_DISABLE#",
+				  "WLAN_PERST#", "12V_EN";
+
+		/*
+		 * Controls the WiFi card PD pin which is low active
+		 * as power down signal. The output-low states, the signal
+		 * is inactive, e.g. not power down
+		 */
+		wlan-pd-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PD#";
+		};
+
+		/*
+		 * Controls the WiFi card disable pin which is low active
+		 * as disable signal. The output-low states, the signal
+		 * is inactive, e.g. not disabled
+		 */
+		wlan-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_W_DISABLE#";
+		};
+
+		/*
+		 * Controls the WiFi card reset pin which is low active
+		 * as reset signal. The output-low states, the signal
+		 * is inactive, e.g. not in reset
+		 */
+		wlan-perst-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PERST#";
+		};
+	};
+
+	expander2: gpio@72 {
+		compatible = "nxp,pca9538";
+		reg = <0x72>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+				  "LCD_BLT_EN", "DP_EN",
+				  "MIPI_CSI_EN", "MIPI_CSI_RST#",
+				  "USER_LED1", "USER_LED2";
+	};
+};
+
+&lpi2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	pinctrl-1 = <&pinctrl_lpi2c5>;
+	status = "okay";
+
+	dp_bridge: dp-bridge@f {
+		compatible = "toshiba,tc9595", "toshiba,tc358767";
+		reg = <0x0f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tc9595>;
+		clock-names = "ref";
+		clocks = <&clk_dp>;
+		reset-gpios = <&expander2 3 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+		toshiba,hpd-pin = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				dp_dsi_in: endpoint {
+					data-lanes = <1 2 3 4>;
+				};
+			};
+		};
+	};
+};
+
+&lpspi6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi6>, <&pinctrl_lpspi6_cs>;
+	cs-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* disabled per default, console for M33 */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "disabled";
+};
+
+&lpuart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&lpuart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	status = "okay";
+};
+
+&pcf85063 {
+	/* RTC_EVENT# from SoM is connected on mainboard */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&se97_som {
+	/* TEMP_EVENT# from SoM is connected on mainboard */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_temp_sensor_som>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&tpm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm5>;
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	hub_2_0: usb-hub@1 {
+		compatible = "usb424,2517";
+		reg = <1>;
+		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_afe: afegrp {
+		fsl,pins = <
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO07__GPIO2_IO07			0x011e
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO08__GPIO2_IO08			0x051e
+			/* HYS | PD */
+			MX93_PAD_GPIO_IO09__GPIO2_IO09			0x1400
+			/* HYS */
+			MX93_PAD_GPIO_IO24__GPIO2_IO24			0x1000
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x51e
+			/* SION | HYS | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x4000111e
+			/* HYS | FSEL_0 | DSE no drive */
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x1000
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x1000
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x1000
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x1000
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x1000
+			/* HYS | PD | FSEL_0 | DSE no drive */
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x1400
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x51e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x51e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x51e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x51e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x51e
+			/* PD | FSEL_3 | DSE X3 */
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+		>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | DSE no drive */
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26			0x1000
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x51e
+			/* SION | HYS | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000111e
+			/* HYS | FSEL_0 | DSE no drive */
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x1000
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x1000
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x1000
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x1000
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x1000
+			/* HYS | PD | FSEL_0 | DSE no drive */
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x1400
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x51e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x51e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x51e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x51e
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x51e
+			/* PD | FSEL_3 | DSE X3 */
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x58e
+		>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | DSE no drive */
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x1000
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			/* HYS | PU | FSEL_0 | DSE no drive */
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX		0x1200
+			/* PU | FSEL_3 | DSE X4 */
+			MX93_PAD_PDM_CLK__CAN1_TX			0x039e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			/* HYS | PU | FSEL_0 | DSE no drive */
+			MX93_PAD_GPIO_IO27__CAN2_RX			0x1200
+			/* PU | FSEL_3 | DSE X4 */
+			MX93_PAD_GPIO_IO25__CAN2_TX			0x039e
+		>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <
+			/* HYS | PD | FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO16__GPIO2_IO16			0x151e
+			MX93_PAD_GPIO_IO17__GPIO2_IO17			0x151e
+			MX93_PAD_GPIO_IO18__GPIO2_IO18			0x151e
+			MX93_PAD_GPIO_IO19__GPIO2_IO19			0x151e
+			MX93_PAD_GPIO_IO20__GPIO2_IO20			0x151e
+			MX93_PAD_GPIO_IO21__GPIO2_IO21			0x151e
+			MX93_PAD_GPIO_IO26__GPIO2_IO26			0x151e
+		>;
+	};
+
+	pinctrl_jtag: jtaggrp {
+		fsl,pins = <
+			MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK		0x051e
+			MX93_PAD_DAP_TDI__JTAG_MUX_TDI			0x1200
+			MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO		0x031e
+			MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS		0x1200
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			/* SION | HYS | OD | FSEL_3 | DSE X4 */
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA			0x4000199e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL			0x4000199e
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			/* SION | HYS | OD | FSEL_3 | DSE X4 */
+			MX93_PAD_GPIO_IO22__LPI2C5_SDA			0x4000199e
+			MX93_PAD_GPIO_IO23__LPI2C5_SCL			0x4000199e
+		>;
+	};
+
+	pinctrl_lpspi6: lpspi6grp {
+		fsl,pins = <
+			/* HYS | PD | FSEL_0 | DSE no drive */
+			MX93_PAD_GPIO_IO01__LPSPI6_SIN			0x1400
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO02__LPSPI6_SOUT			0x051e
+			MX93_PAD_GPIO_IO03__LPSPI6_SCK			0x051e
+		>;
+	};
+
+	pinctrl_lpspi6_cs: lpspi6csgrp {
+		fsl,pins = <
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO00__GPIO2_IO00			0x011e
+		>;
+	};
+
+	pinctrl_mipi_csi: mipicsigrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3		0x051e /* MCLK */
+			MX93_PAD_GPIO_IO10__GPIO2_IO10			0x051e /* TRIGGER */
+			MX93_PAD_GPIO_IO11__GPIO2_IO11			0x1400 /* SYNC */
+		>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_SAI1_RXD0__GPIO1_IO14			0x1000
+		>;
+	};
+
+	pinctrl_pexp_irq: pexpirqgrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_SAI1_TXC__GPIO1_IO12			0x1000
+		>;
+	};
+
+	pinctrl_tc9595: tc9595-grp {
+		fsl,pins = <
+			/* HYS | PD | FSEL_0 | no DSE */
+			MX93_PAD_CCM_CLKO4__GPIO4_IO29			0x1400
+		>;
+	};
+
+	pinctrl_temp_sensor_som: tempsensorsomgrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | no DSE */
+			MX93_PAD_SAI1_TXFS__GPIO1_IO11			0x1000
+		>;
+	};
+
+	pinctrl_tpm5: tpm5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO06__TPM5_CH0			0x57e
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_I2C2_SCL__GPIO1_IO02			0x1000
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x011e
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_UART2_RXD__LPUART2_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_UART2_TXD__LPUART2_TX			0x011e
+			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B		0x011e
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_GPIO_IO15__LPUART3_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO14__LPUART3_TX			0x011e
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_GPIO_IO05__LPUART6_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO04__LPUART6_TX			0x011e
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_GPIO_IO13__LPUART8_RX			0x1000
+			/* FSEL_2 | DSE X4 */
+			MX93_PAD_GPIO_IO12__LPUART8_TX			0x011e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			/* HYS | FSEL_0 | No DSE */
+			MX93_PAD_SD2_CD_B__GPIO3_IO00			0x1000
+		>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_hs: usdhc2hsgrp {
+		fsl,pins = <
+			/* PD | FSEL_3 | DSE X5 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x05be
+			/* HYS | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x4000139e
+			/* HYS | PU | FSEL_3 | DSE X3 */
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000138e
+			/* FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x010e
+		>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+		fsl,pins = <
+			/* PD | FSEL_3 | DSE X6 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x05fe
+			/* HYS | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x4000139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000139e
+			/* FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x010e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
new file mode 100644
index 000000000000..82914ca148d3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ */
+
+#include "imx93.dtsi"
+
+/{
+	model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA SOM";
+	compatible = "tq,imx93-tqma9352", "fsl,imx93";
+
+	memory@80000000 {
+		device_type = "memory";
+		/* our minimum RAM config will be 1024 MiB */
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+	};
+
+	/* SD2 RST# via PMIC SW_EN */
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&buck4>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	vref-supply = <&buck5>;
+};
+
+&flexspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		/*
+		 * no DQS, RXCLKSRC internal loop back, max 66 MHz
+		 * clk framework uses CLK_DIVIDER_ROUND_CLOSEST
+		 * selected value together with root from
+		 * IMX93_CLK_SYS_PLL_PFD1 @ 800.000.000 Hz helps to
+		 * respect the maximum value.
+		 */
+		spi-max-frequency = <62000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	se97_som: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pca9451a: pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9451>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* V_0V8_SOC - hw developer guide: 0.75 .. 0.9 */
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_DDRQ - 0.6 V for LPDDR4X */
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <600000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_3V3 - EEPROM, RTC, ... */
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8 - SPI NOR, eMMC, RAM VDD1... */
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V1 - RAM VDD2*/
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_BBSM, fix 1.8 */
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V8_ANA */
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_SD2 - 3.3/1.8V USDHC2 io Voltage */
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+
+	eeprom0: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&buck4>;
+	};
+
+	eeprom1: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&buck4>;
+	};
+
+	/* protectable identification memory (part of M24C64-D @57) */
+	eeprom@5f {
+		compatible = "atmel,24c64d-wl";
+		reg = <0x5f>;
+		vcc-supply = <&buck4>;
+	};
+
+	imu@6a {
+		compatible = "st,ism330dhcx";
+		reg = <0x6a>;
+		vdd-supply = <&buck4>;
+		vddio-supply = <&buck4>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi1: flexspi1grp {
+		fsl,pins = <
+			/* FSEL 3  | DSE X6 */
+			MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B	0x01fe
+			MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK	0x01fe
+			/* HYS | PU | FSEL 3  | DSE X6 */
+			MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00	0x13fe
+			MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01	0x13fe
+			/* HYS | FSEL 3  | DSE X6 (external PU) */
+			MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02	0x11fe
+			MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03	0x11fe
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			/* SION | OD | FSEL 3 | DSE X4 */
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL		0x4000199e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA		0x4000199e
+		>;
+	};
+
+	pinctrl_pca9451: pca9451grp {
+		fsl,pins = <
+			/* HYS | PU */
+			MX93_PAD_I2C2_SDA__GPIO1_IO03		0x1200
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			/* FSEL 2 | DSE X2 */
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x106
+		>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			/* PD | FSEL 3 | DSE X5 */
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x5be
+			/* HYS | FSEL 0 | no drive */
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x1000
+			/* HYS | FSEL 3 | X5 */
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x400011be
+			/* HYS | FSEL 3 | X4 */
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000119e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x4000119e
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x4000119e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x4000119e
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x4000119e
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x4000119e
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x4000119e
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x4000119e
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			/* PU | FSEL 1 | DSE X4 */
+			MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY	0x31e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
new file mode 100644
index 000000000000..c789c1f24bdc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 NXP
+ * Copyright 2023 Variscite Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "imx93-var-som.dtsi"
+
+/{
+	model = "Variscite VAR-SOM-MX93 on Symphony evaluation board";
+	compatible = "variscite,var-som-mx93-symphony",
+		     "variscite,var-som-mx93", "fsl,imx93";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+	};
+
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	/*
+	 * Needed only for Symphony <= v1.5
+	 */
+	reg_fec_phy: regulator-fec-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-phy";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-enable-ramp-delay = <20000>;
+		gpio = <&pca9534 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ethosu_mem: ethosu-region@88000000 {
+			compatible = "shared-dma-pool";
+			reusable;
+			reg = <0x0 0x88000000 0x0 0x8000000>;
+		};
+
+		vdev0vring0: vdev0vring0@87ee0000 {
+			reg = <0 0x87ee0000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@87ee8000 {
+			reg = <0 0x87ee8000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@87ef0000 {
+			reg = <0 0x87ef0000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@87ef8000 {
+			reg = <0 0x87ef8000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@2021f000 {
+			reg = <0 0x2021f000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@87f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x87f00000 0 0x100000>;
+			no-map;
+		};
+
+		ele_reserved: ele-reserved@87de0000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x87de0000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-back {
+			label = "Back";
+			gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-home {
+			label = "Home";
+			gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key-menu {
+			label = "Menu";
+			gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pca9534 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+/* Use external instead of internal RTC*/
+&bbnsm_rtc {
+	status = "disabled";
+};
+
+&eqos {
+	mdio {
+		ethphy1: ethernet-phy@5 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <5>;
+			qca,disable-smarteee;
+			eee-broken-1000t;
+			reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <20000>;
+			vddio-supply = <&vddio1>;
+
+			vddio1: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_fec_phy>;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1_gpio>;
+	pinctrl-2 = <&pinctrl_lpi2c1_gpio>;
+	scl-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	/* DS1337 RTC module */
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&lpi2c5 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	pinctrl-1 = <&pinctrl_lpi2c5_gpio>;
+	pinctrl-2 = <&pinctrl_lpi2c5_gpio>;
+	scl-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pca9534: gpio@20 {
+		compatible = "nxp,pca9534";
+		reg = <0x20>;
+		gpio-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9534>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		#gpio-cells = <2>;
+		wakeup-source;
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* J18.7, J18.9 */
+&lpuart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+/* SD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+	no-sdio;
+	no-mmc;
+};
+
+/* Watchdog */
+&wdog3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x5fe
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__CAN1_TX                       0x139e
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX               0x139e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL			0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c1_gpio: lpi2c1gpiogrp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__GPIO1_IO00			0x31e
+			MX93_PAD_I2C1_SDA__GPIO1_IO01			0x31e
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO23__LPI2C5_SCL			0x40000b9e
+			MX93_PAD_GPIO_IO22__LPI2C5_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c5_gpio: lpi2c5gpiogrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO23__GPIO2_IO23			0x31e
+			MX93_PAD_GPIO_IO22__GPIO2_IO22			0x31e
+		>;
+	};
+
+	pinctrl_pca9534: pca9534grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO05__LPUART6_RX			0x31e
+			MX93_PAD_GPIO_IO04__LPUART6_TX			0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO18__GPIO2_IO18		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi
new file mode 100644
index 000000000000..a5f09487d803
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 NXP
+ * Copyright 2023 Variscite Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx93.dtsi"
+
+/{
+	model = "Variscite VAR-SOM-MX93 module";
+	compatible = "variscite,var-som-mx93", "fsl,imx93";
+
+	mmc_pwrseq: mmc-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <10000>;
+		reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>,	/* WIFI_RESET */
+			      <&gpio3 7 GPIO_ACTIVE_LOW>;	/* WIFI_PWR_EN */
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	/*
+	 * The required RGMII TX and RX 2ns delays are implemented directly
+	 * in hardware via passive delay elements on the SOM PCB.
+	 * No delay configuration is needed in software via PHY driver.
+	 */
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	snps,clk-csr = <5>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <1000000>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			eee-broken-1000t;
+			reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <100000>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_YELLOW>;
+					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "netdev";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "netdev";
+				};
+			};
+		};
+	};
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x57e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x57e
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x58e
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
+			MX93_PAD_UART2_TXD__GPIO1_IO07				0x51e
+		>;
+	};
+
+	pinctrl_reg_eqos_phy: regeqosgrp {
+		fsl,pins = <
+			MX93_PAD_UART2_TXD__GPIO1_IO07			0x51e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index f83a07c7c9b1..7b27012dfcb5 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -1,334 +1,161 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * Copyright 2022 NXP
+ * Copyright 2022,2025 NXP
  */
 
-#include <dt-bindings/clock/imx93-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx91_93_common.dtsi"
 
-#include "imx93-pinfunc.h"
+/{
+	cm33: remoteproc-cm33 {
+		compatible = "fsl,imx93-cm33";
+		clocks = <&clk IMX93_CLK_CM33_GATE>;
+		status = "disabled";
+	};
 
-/ {
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
 
-	aliases {
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		serial0 = &lpuart1;
-		serial1 = &lpuart2;
-		serial2 = &lpuart3;
-		serial3 = &lpuart4;
-		serial4 = &lpuart5;
-		serial5 = &lpuart6;
-		serial6 = &lpuart7;
-		serial7 = &lpuart8;
-	};
+			thermal-sensors = <&tmu 0>;
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
 
-		A55_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a55";
-			reg = <0x0>;
-			enable-method = "psci";
-			#cooling-cells = <2>;
-		};
+				cpu_crit: cpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 
-		A55_1: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a55";
-			reg = <0x100>;
-			enable-method = "psci";
-			#cooling-cells = <2>;
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
-
 	};
+};
 
-	osc_32k: clock-osc-32k {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "osc_32k";
+&aips1 {
+	mu1: mailbox@44230000 {
+		compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
+		reg = <0x44230000 0x10000>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX93_CLK_MU1_B_GATE>;
+		#mbox-cells = <2>;
+		status = "disabled";
 	};
 
-	osc_24m: clock-osc-24m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "osc_24m";
+	tmu: tmu@44482000 {
+		compatible = "fsl,qoriq-tmu";
+		reg = <0x44482000 0x1000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX93_CLK_TMC_GATE>;
+		#thermal-sensor-cells = <1>;
+		little-endian;
+		fsl,tmu-range = <0x800000da 0x800000e9
+				 0x80000102 0x8000012a
+				 0x80000166 0x800001a7
+				 0x800001b6>;
+		fsl,tmu-calibration = <0x00000000 0x0000000e
+				       0x00000001 0x00000029
+				       0x00000002 0x00000056
+				       0x00000003 0x000000a2
+				       0x00000004 0x00000116
+				       0x00000005 0x00000195
+				       0x00000006 0x000001b2>;
 	};
+};
 
-	clk_ext1: clock-ext1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <133000000>;
-		clock-output-names = "clk_ext1";
+&aips2 {
+	mu2: mailbox@42440000 {
+		compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
+		reg = <0x42440000 0x10000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX93_CLK_MU2_B_GATE>;
+		#mbox-cells = <2>;
+		status = "disabled";
 	};
+};
 
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
+&cpus {
+	A55_0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a55";
+		reg = <0x0>;
+		enable-method = "psci";
+		#cooling-cells = <2>;
+		cpu-idle-states = <&cpu_pd_wait>;
+		i-cache-size = <32768>;
+		i-cache-line-size = <64>;
+		i-cache-sets = <128>;
+		d-cache-size = <32768>;
+		d-cache-line-size = <64>;
+		d-cache-sets = <128>;
+		next-level-cache = <&l2_cache_l0>;
 	};
 
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <24000000>;
-		arm,no-tick-in-suspend;
-		interrupt-parent = <&gic>;
+	A55_1: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a55";
+		reg = <0x100>;
+		enable-method = "psci";
+		#cooling-cells = <2>;
+		cpu-idle-states = <&cpu_pd_wait>;
+		i-cache-size = <32768>;
+		i-cache-line-size = <64>;
+		i-cache-sets = <128>;
+		d-cache-size = <32768>;
+		d-cache-line-size = <64>;
+		d-cache-sets = <128>;
+		next-level-cache = <&l2_cache_l1>;
 	};
 
-	gic: interrupt-controller@48000000 {
-		compatible = "arm,gic-v3";
-		reg = <0 0x48000000 0 0x10000>,
-		      <0 0x48040000 0 0xc0000>;
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-parent = <&gic>;
+	l2_cache_l0: l2-cache-l0 {
+		compatible = "cache";
+		cache-size = <65536>;
+		cache-line-size = <64>;
+		cache-sets = <256>;
+		cache-level = <2>;
+		cache-unified;
+		next-level-cache = <&l3_cache>;
 	};
 
-	soc@0 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x0 0x0 0x80000000>,
-			 <0x28000000 0x0 0x28000000 0x10000000>;
-
-		aips1: bus@44000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x44000000 0x800000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			mu1: mailbox@44230000 {
-				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
-				reg = <0x44230000 0x10000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				#mbox-cells = <2>;
-				status = "disabled";
-			};
-
-			system_counter: timer@44290000 {
-				compatible = "nxp,sysctr-timer";
-				reg = <0x44290000 0x30000>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&osc_24m>;
-				clock-names = "per";
-			};
-
-			lpuart1: serial@44380000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x44380000 0x1000>;
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
-				clock-names = "ipg";
-				status = "disabled";
-			};
-
-			lpuart2: serial@44390000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x44390000 0x1000>;
-				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
-				clock-names = "ipg";
-				status = "disabled";
-			};
-
-			iomuxc: pinctrl@443c0000 {
-				compatible = "fsl,imx93-iomuxc";
-				reg = <0x443c0000 0x10000>;
-				status = "okay";
-			};
-
-			clk: clock-controller@44450000 {
-				compatible = "fsl,imx93-ccm";
-				reg = <0x44450000 0x10000>;
-				#clock-cells = <1>;
-				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
-				clock-names = "osc_32k", "osc_24m", "clk_ext1";
-				status = "okay";
-			};
-
-			anatop: anatop@44480000 {
-				compatible = "fsl,imx93-anatop", "syscon";
-				reg = <0x44480000 0x10000>;
-			};
-		};
-
-		aips2: bus@42000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x42000000 0x800000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			mu2: mailbox@42440000 {
-				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
-				reg = <0x42440000 0x10000>;
-				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				#mbox-cells = <2>;
-				status = "disabled";
-			};
-
-			lpuart3: serial@42570000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x42570000 0x1000>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
-				clock-names = "ipg";
-				status = "disabled";
-			};
-
-			lpuart4: serial@42580000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x42580000 0x1000>;
-				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
-				clock-names = "ipg";
-				status = "disabled";
-			};
-
-			lpuart5: serial@42590000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x42590000 0x1000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
-				clock-names = "ipg";
-				status = "disabled";
-			};
-
-			lpuart6: serial@425a0000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x425a0000 0x1000>;
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
-				clock-names = "ipg";
-				status = "disabled";
-			};
-
-			lpuart7: serial@42690000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x42690000 0x1000>;
-				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
-				clock-names = "ipg";
-				status = "disabled";
-			};
-
-			lpuart8: serial@426a0000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x426a0000 0x1000>;
-				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
-				clock-names = "ipg";
-				status = "disabled";
-			};
-		};
-
-		aips3: bus@42800000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x42800000 0x800000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usdhc1: mmc@42850000 {
-				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
-				reg = <0x42850000 0x10000>;
-				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_USDHC1_GATE>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <8>;
-				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
-				status = "disabled";
-			};
-
-			usdhc2: mmc@42860000 {
-				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
-				reg = <0x42860000 0x10000>;
-				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_USDHC2_GATE>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
-				status = "disabled";
-			};
-
-			usdhc3: mmc@428b0000 {
-				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
-				reg = <0x428b0000 0x10000>;
-				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_USDHC3_GATE>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
-				status = "disabled";
-			};
-		};
-
-		gpio2: gpio@43810080 {
-			compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
-			reg = <0x43810080 0x1000>, <0x43810040 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-ranges = <&iomuxc 0 32 32>;
-		};
-
-		gpio3: gpio@43820080 {
-			compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
-			reg = <0x43820080 0x1000>, <0x43820040 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-ranges = <&iomuxc 0 64 32>;
-		};
+	l2_cache_l1: l2-cache-l1 {
+		compatible = "cache";
+		cache-size = <65536>;
+		cache-line-size = <64>;
+		cache-sets = <256>;
+		cache-level = <2>;
+		cache-unified;
+		next-level-cache = <&l3_cache>;
+	};
 
-		gpio4: gpio@43830080 {
-			compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
-			reg = <0x43830080 0x1000>, <0x43830040 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-ranges = <&iomuxc 0 96 32>;
-		};
+	l3_cache: l3-cache {
+		compatible = "cache";
+		cache-size = <262144>;
+		cache-line-size = <64>;
+		cache-sets = <256>;
+		cache-level = <3>;
+		cache-unified;
+	};
+};
 
-		gpio1: gpio@47400080 {
-			compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
-			reg = <0x47400080 0x1000>, <0x47400040 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-ranges = <&iomuxc 0 0 32>;
-		};
+&src {
+	mlmix: power-domain@44461800 {
+		compatible = "fsl,imx93-src-slice";
+		reg = <0x44461800 0x400>, <0x44464800 0x400>;
+		clocks = <&clk IMX93_CLK_ML_APB>,
+			 <&clk IMX93_CLK_ML>;
+		#power-domain-cells = <0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx94-clock.h b/arch/arm64/boot/dts/freescale/imx94-clock.h
new file mode 100644
index 000000000000..27e8c0839722
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx94-clock.h
@@ -0,0 +1,193 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
+/*
+ * Copyright 2024-2025 NXP
+ */
+
+#ifndef __IMX94_CLOCK_H
+#define __IMX94_CLOCK_H
+
+#define IMX94_CLK_EXT				0
+#define IMX94_CLK_32K				1
+#define IMX94_CLK_24M				2
+#define IMX94_CLK_FRO				3
+#define IMX94_CLK_SYSPLL1_VCO			4
+#define IMX94_CLK_SYSPLL1_PFD0_UNGATED		5
+#define IMX94_CLK_SYSPLL1_PFD0			6
+#define IMX94_CLK_SYSPLL1_PFD0_DIV2		7
+#define IMX94_CLK_SYSPLL1_PFD1_UNGATED		8
+#define IMX94_CLK_SYSPLL1_PFD1			9
+#define IMX94_CLK_SYSPLL1_PFD1_DIV2		10
+#define IMX94_CLK_SYSPLL1_PFD2_UNGATED		11
+#define IMX94_CLK_SYSPLL1_PFD2			12
+#define IMX94_CLK_SYSPLL1_PFD2_DIV2		13
+#define IMX94_CLK_AUDIOPLL1_VCO			14
+#define IMX94_CLK_AUDIOPLL1			15
+#define IMX94_CLK_AUDIOPLL2_VCO			16
+#define IMX94_CLK_AUDIOPLL2			17
+#define IMX94_CLK_RESERVED18			18
+#define IMX94_CLK_RESERVED19			19
+#define IMX94_CLK_RESERVED20			20
+#define IMX94_CLK_RESERVED21			21
+#define IMX94_CLK_RESERVED22			22
+#define IMX94_CLK_RESERVED23			23
+#define IMX94_CLK_ENCPLL_VCO			24
+#define IMX94_CLK_ENCPLL_PFD0_UNGATED		25
+#define IMX94_CLK_ENCPLL_PFD0			26
+#define IMX94_CLK_ENCPLL_PFD1_UNGATED		27
+#define IMX94_CLK_ENCPLL_PFD1			28
+#define IMX94_CLK_ARMPLL_VCO			29
+#define IMX94_CLK_ARMPLL_PFD0_UNGATED		30
+#define IMX94_CLK_ARMPLL_PFD0			31
+#define IMX94_CLK_ARMPLL_PFD1_UNGATED		32
+#define IMX94_CLK_ARMPLL_PFD1			33
+#define IMX94_CLK_ARMPLL_PFD2_UNGATED		34
+#define IMX94_CLK_ARMPLL_PFD2			35
+#define IMX94_CLK_ARMPLL_PFD3_UNGATED		36
+#define IMX94_CLK_ARMPLL_PFD3			37
+#define IMX94_CLK_DRAMPLL_VCO			38
+#define IMX94_CLK_DRAMPLL			39
+#define IMX94_CLK_HSIOPLL_VCO			40
+#define IMX94_CLK_HSIOPLL			41
+#define IMX94_CLK_LDBPLL_VCO			42
+#define IMX94_CLK_LDBPLL			43
+#define IMX94_CLK_EXT1				44
+#define IMX94_CLK_EXT2				45
+#define IMX94_CLK_ADC				46
+#define IMX94_CLK_BUSAON			47
+#define IMX94_CLK_CAN1				48
+#define IMX94_CLK_GLITCHFILTER			49
+#define IMX94_CLK_GPT1				50
+#define IMX94_CLK_I3C1SLOW			51
+#define IMX94_CLK_LPI2C1			52
+#define IMX94_CLK_LPI2C2			53
+#define IMX94_CLK_LPSPI1			54
+#define IMX94_CLK_LPSPI2			55
+#define IMX94_CLK_LPTMR1			56
+#define IMX94_CLK_LPUART1			57
+#define IMX94_CLK_LPUART2			58
+#define IMX94_CLK_M33				59
+#define IMX94_CLK_M33SYSTICK			60
+#define IMX94_CLK_PDM				61
+#define IMX94_CLK_SAI1				62
+#define IMX94_CLK_TPM2				63
+#define IMX94_CLK_A55				64
+#define IMX94_CLK_A55MTRBUS			65
+#define IMX94_CLK_A55PERIPH			66
+#define IMX94_CLK_DRAMALT			67
+#define IMX94_CLK_DRAMAPB			68
+#define IMX94_CLK_DISPAPB			69
+#define IMX94_CLK_DISPAXI			70
+#define IMX94_CLK_DISPPIX			71
+#define IMX94_CLK_HSIOACSCAN480M		72
+#define IMX94_CLK_HSIOACSCAN80M			73
+#define IMX94_CLK_HSIO				74
+#define IMX94_CLK_HSIOPCIEAUX			75
+#define IMX94_CLK_HSIOPCIETEST160M		76
+#define IMX94_CLK_HSIOPCIETEST400M		77
+#define IMX94_CLK_HSIOPCIETEST500M		78
+#define IMX94_CLK_HSIOPCIETEST50M		79
+#define IMX94_CLK_HSIOUSBTEST60M		80
+#define IMX94_CLK_BUSM70			81
+#define IMX94_CLK_M70				82
+#define IMX94_CLK_M70SYSTICK			83
+#define IMX94_CLK_BUSM71			84
+#define IMX94_CLK_M71				85
+#define IMX94_CLK_M71SYSTICK			86
+#define IMX94_CLK_BUSNETCMIX			87
+#define IMX94_CLK_ECAT				88
+#define IMX94_CLK_ENET				89
+#define IMX94_CLK_ENETPHYTEST200M		90
+#define IMX94_CLK_ENETPHYTEST500M		91
+#define IMX94_CLK_ENETPHYTEST667M		92
+#define IMX94_CLK_ENETREF			93
+#define IMX94_CLK_ENETTIMER1			94
+#define IMX94_CLK_ENETTIMER2			95
+#define IMX94_CLK_ENETTIMER3			96
+#define IMX94_CLK_FLEXIO3			97
+#define IMX94_CLK_FLEXIO4			98
+#define IMX94_CLK_M33SYNC			99
+#define IMX94_CLK_M33SYNCSYSTICK		100
+#define IMX94_CLK_MAC0				101
+#define IMX94_CLK_MAC1				102
+#define IMX94_CLK_MAC2				103
+#define IMX94_CLK_MAC3				104
+#define IMX94_CLK_MAC4				105
+#define IMX94_CLK_MAC5				106
+#define IMX94_CLK_NOCAPB			107
+#define IMX94_CLK_NOC				108
+#define IMX94_CLK_NPUAPB			109
+#define IMX94_CLK_NPU				110
+#define IMX94_CLK_CCMCKO1			111
+#define IMX94_CLK_CCMCKO2			112
+#define IMX94_CLK_CCMCKO3			113
+#define IMX94_CLK_CCMCKO4			114
+#define IMX94_CLK_BISS				115
+#define IMX94_CLK_BUSWAKEUP			116
+#define IMX94_CLK_CAN2				117
+#define IMX94_CLK_CAN3				118
+#define IMX94_CLK_CAN4				119
+#define IMX94_CLK_CAN5				120
+#define IMX94_CLK_ENDAT21			121
+#define IMX94_CLK_ENDAT22			122
+#define IMX94_CLK_ENDAT31FAST			123
+#define IMX94_CLK_ENDAT31SLOW			124
+#define IMX94_CLK_FLEXIO1			125
+#define IMX94_CLK_FLEXIO2			126
+#define IMX94_CLK_GPT2				127
+#define IMX94_CLK_GPT3				128
+#define IMX94_CLK_GPT4				129
+#define IMX94_CLK_HIPERFACE1			130
+#define IMX94_CLK_HIPERFACE1SYNC		131
+#define IMX94_CLK_HIPERFACE2			132
+#define IMX94_CLK_HIPERFACE2SYNC		133
+#define IMX94_CLK_I3C2SLOW			134
+#define IMX94_CLK_LPI2C3			135
+#define IMX94_CLK_LPI2C4			136
+#define IMX94_CLK_LPI2C5			137
+#define IMX94_CLK_LPI2C6			138
+#define IMX94_CLK_LPI2C7			139
+#define IMX94_CLK_LPI2C8			140
+#define IMX94_CLK_LPSPI3			141
+#define IMX94_CLK_LPSPI4			142
+#define IMX94_CLK_LPSPI5			143
+#define IMX94_CLK_LPSPI6			144
+#define IMX94_CLK_LPSPI7			145
+#define IMX94_CLK_LPSPI8			146
+#define IMX94_CLK_LPTMR2			147
+#define IMX94_CLK_LPUART10			148
+#define IMX94_CLK_LPUART11			149
+#define IMX94_CLK_LPUART12			150
+#define IMX94_CLK_LPUART3			151
+#define IMX94_CLK_LPUART4			152
+#define IMX94_CLK_LPUART5			153
+#define IMX94_CLK_LPUART6			154
+#define IMX94_CLK_LPUART7			155
+#define IMX94_CLK_LPUART8			156
+#define IMX94_CLK_LPUART9			157
+#define IMX94_CLK_SAI2				158
+#define IMX94_CLK_SAI3				159
+#define IMX94_CLK_SAI4				160
+#define IMX94_CLK_SWOTRACE			161
+#define IMX94_CLK_TPM4				162
+#define IMX94_CLK_TPM5				163
+#define IMX94_CLK_TPM6				164
+#define IMX94_CLK_USBPHYBURUNIN			165
+#define IMX94_CLK_USDHC1			166
+#define IMX94_CLK_USDHC2			167
+#define IMX94_CLK_USDHC3			168
+#define IMX94_CLK_V2XPK				169
+#define IMX94_CLK_WAKEUPAXI			170
+#define IMX94_CLK_XSPISLVROOT			171
+#define IMX94_CLK_XSPI1				172
+#define IMX94_CLK_XSPI2				173
+#define IMX94_CLK_SEL_EXT			174
+#define IMX94_CLK_SEL_A55C0			175
+#define IMX94_CLK_SEL_A55C1			176
+#define IMX94_CLK_SEL_A55C2			177
+#define IMX94_CLK_SEL_A55C3			178
+#define IMX94_CLK_SEL_A55P			179
+#define IMX94_CLK_SEL_DRAM			180
+#define IMX94_CLK_SEL_TEMPSENSE			181
+#define IMX94_CLK_NPU_CGC			182
+
+#endif /* __IMX94_CLOCK_H */
diff --git a/arch/arm64/boot/dts/freescale/imx94-pinfunc.h b/arch/arm64/boot/dts/freescale/imx94-pinfunc.h
new file mode 100644
index 000000000000..00255db89185
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx94-pinfunc.h
@@ -0,0 +1,1570 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright 2024-2025 NXP
+ */
+
+#ifndef __DTS_IMX94_PINFUNC_H
+#define __DTS_IMX94_PINFUNC_H
+
+/* Drive Strength */
+#define IMX94_DSE_X1		0x2
+#define IMX94_DSE_X2		0x6
+#define IMX94_DSE_X3		0xe
+#define IMX94_DSE_X4		0x1e
+#define IMX94_DSE_X5		0x3e
+#define IMX94_DSE_X6		0x7e
+
+/* Slew Rate */
+#define IMX94_FSEL_FAST		0x180
+#define IMX94_FSEL_SLOW		0x100
+
+/* Pull Up */
+#define IMX94_PU_ENABLE		0x200
+#define IMX94_PU_DISABLE	0x0
+
+/* Pull Down */
+#define IMX94_PD_ENABLE		0x400
+#define IMX94_PD_DISABLE	0x0
+
+/* Open Drain */
+#define IMX94_OD_ENABLE		0x800
+#define IMX94_OD_DISABLE	0x0
+
+/* Schmitt trigger */
+#define IMX94_HYS_SCHMITT	0x1000
+#define IMX94_HYS_NO_SCHMITT	0x0
+
+/*
+ * The pin function ID is a tuple of <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define IMX94_PAD_DAP_TDI__JTAG_MUX_TDI                     0x0000 0x0304 0x092c 0x00 0x00
+#define IMX94_PAD_DAP_TDI__MQS2_LEFT                        0x0000 0x0304 0x0000 0x01 0x00
+#define IMX94_PAD_DAP_TDI__ECAT_LED_ERR                     0x0000 0x0304 0x0000 0x02 0x00
+#define IMX94_PAD_DAP_TDI__CAN2_TX                          0x0000 0x0304 0x0000 0x03 0x00
+#define IMX94_PAD_DAP_TDI__SINC_FILTER_GLUE3_BREAK          0x0000 0x0304 0x0000 0x04 0x00
+#define IMX94_PAD_DAP_TDI__GPIO4_IO4                        0x0000 0x0304 0x0000 0x05 0x00
+#define IMX94_PAD_DAP_TDI__LPUART5_RX                       0x0000 0x0304 0x07bc 0x06 0x00
+#define IMX94_PAD_DAP_TDI__XBAR1_XBAR_INOUT26               0x0000 0x0304 0x0000 0x07 0x00
+
+#define IMX94_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS               0x0004 0x0308 0x0930 0x00 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__CAN5_TX                    0x0004 0x0308 0x0000 0x01 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__GPT_MUX_INOUT10            0x0004 0x0308 0x0000 0x02 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__LPUART8_TX                 0x0004 0x0308 0x07dc 0x03 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__SINC3_MOD_CLK1             0x0004 0x0308 0x0000 0x04 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__GPIO4_IO5                  0x0004 0x0308 0x0000 0x05 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B              0x0004 0x0308 0x0000 0x06 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__XBAR1_XBAR_INOUT27         0x0004 0x0308 0x0000 0x07 0x00
+
+#define IMX94_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK              0x0008 0x030c 0x0928 0x00 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__CAN5_RX                   0x0008 0x030c 0x0688 0x01 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__GPT_MUX_INOUT11           0x0008 0x030c 0x0000 0x02 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__LPUART8_RX                0x0008 0x030c 0x07d8 0x03 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__SINC3_MOD_CLK0            0x0008 0x030c 0x0000 0x04 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__GPIO4_IO6                 0x0008 0x030c 0x0000 0x05 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B             0x0008 0x030c 0x07b8 0x06 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__XBAR1_XBAR_INOUT28        0x0008 0x030c 0x0000 0x07 0x00
+
+#define IMX94_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO            0x000c 0x0310 0x0000 0x00 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT              0x000c 0x0310 0x0000 0x01 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__ECAT_RESET_OUT          0x000c 0x0310 0x0000 0x02 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__CAN2_RX                 0x000c 0x0310 0x067c 0x03 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__SINC3_MOD_CLK2          0x000c 0x0310 0x0000 0x04 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__GPIO4_IO7               0x000c 0x0310 0x0000 0x05 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__LPUART5_TX              0x000c 0x0310 0x07c0 0x06 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__XBAR1_XBAR_INOUT29      0x000c 0x0310 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO00__GPIO2_IO0                      0x0010 0x0314 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO00__I3C2_PUR                       0x0010 0x0314 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO00__XBAR1_XBAR_INOUT39             0x0010 0x0314 0x08d4 0x02 0x00
+#define IMX94_PAD_GPIO_IO00__I3C2_PUR_B                     0x0010 0x0314 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO00__LPSPI6_PCS0                    0x0010 0x0314 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO00__LPUART5_TX                     0x0010 0x0314 0x07c0 0x05 0x01
+#define IMX94_PAD_GPIO_IO00__LPI2C5_SDA                     0x0010 0x0314 0x0740 0x06 0x00
+#define IMX94_PAD_GPIO_IO00__FLEXIO1_FLEXIO0                0x0010 0x0314 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO01__GPIO2_IO1                      0x0014 0x0318 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO01__I3C2_SCL                       0x0014 0x0318 0x0720 0x01 0x00
+#define IMX94_PAD_GPIO_IO01__XBAR1_XBAR_INOUT40             0x0014 0x0318 0x08d8 0x02 0x00
+#define IMX94_PAD_GPIO_IO01__EWM_OUT_B                      0x0014 0x0318 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO01__LPSPI6_SIN                     0x0014 0x0318 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO01__LPUART5_RX                     0x0014 0x0318 0x07bc 0x05 0x01
+#define IMX94_PAD_GPIO_IO01__LPI2C5_SCL                     0x0014 0x0318 0x073c 0x06 0x00
+#define IMX94_PAD_GPIO_IO01__FLEXIO1_FLEXIO1                0x0014 0x0318 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO02__GPIO2_IO2                      0x0018 0x031c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO02__I3C2_SDA                       0x0018 0x031c 0x0724 0x01 0x00
+#define IMX94_PAD_GPIO_IO02__XBAR1_XBAR_INOUT41             0x0018 0x031c 0x08dc 0x02 0x00
+#define IMX94_PAD_GPIO_IO02__GPT_MUX_INOUT1                 0x0018 0x031c 0x0700 0x03 0x00
+#define IMX94_PAD_GPIO_IO02__LPSPI6_SOUT                    0x0018 0x031c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO02__LPUART5_CTS_B                  0x0018 0x031c 0x07b8 0x05 0x01
+#define IMX94_PAD_GPIO_IO02__LPI2C6_SDA                     0x0018 0x031c 0x074c 0x06 0x00
+#define IMX94_PAD_GPIO_IO02__FLEXIO1_FLEXIO2                0x0018 0x031c 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO03__GPIO2_IO3                      0x001c 0x0320 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO03__EWM_OUT_B                      0x001c 0x0320 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO03__XBAR1_XBAR_INOUT42             0x001c 0x0320 0x08e0 0x02 0x00
+#define IMX94_PAD_GPIO_IO03__GPT_MUX_INOUT4                 0x001c 0x0320 0x0708 0x03 0x00
+#define IMX94_PAD_GPIO_IO03__LPSPI6_SCK                     0x001c 0x0320 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO03__LPUART5_RTS_B                  0x001c 0x0320 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO03__LPI2C6_SCL                     0x001c 0x0320 0x0748 0x06 0x00
+#define IMX94_PAD_GPIO_IO03__FLEXIO1_FLEXIO3                0x001c 0x0320 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO04__GPIO2_IO4                      0x0020 0x0324 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO04__TPM3_CH0                       0x0020 0x0324 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO04__PDM_CLK                        0x0020 0x0324 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO04__GPT_MUX_INOUT5                 0x0020 0x0324 0x070c 0x03 0x00
+#define IMX94_PAD_GPIO_IO04__LPSPI7_PCS0                    0x0020 0x0324 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO04__LPUART6_TX                     0x0020 0x0324 0x07cc 0x05 0x00
+#define IMX94_PAD_GPIO_IO04__LPI2C6_SDA                     0x0020 0x0324 0x074c 0x06 0x01
+#define IMX94_PAD_GPIO_IO04__FLEXIO1_FLEXIO4                0x0020 0x0324 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO05__GPIO2_IO5                      0x0024 0x0328 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO05__TPM4_CH0                       0x0024 0x0328 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO05__PDM_BIT_STREAM0                0x0024 0x0328 0x0610 0x02 0x00
+#define IMX94_PAD_GPIO_IO05__GPT_MUX_INOUT7                 0x0024 0x0328 0x0714 0x03 0x00
+#define IMX94_PAD_GPIO_IO05__LPSPI7_SIN                     0x0024 0x0328 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO05__LPUART6_RX                     0x0024 0x0328 0x07c8 0x05 0x00
+#define IMX94_PAD_GPIO_IO05__LPI2C6_SCL                     0x0024 0x0328 0x0748 0x06 0x01
+#define IMX94_PAD_GPIO_IO05__FLEXIO1_FLEXIO5                0x0024 0x0328 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO06__GPIO2_IO6                      0x0028 0x032c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO06__TPM5_CH0                       0x0028 0x032c 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO06__PDM_BIT_STREAM1                0x0028 0x032c 0x0614 0x02 0x00
+#define IMX94_PAD_GPIO_IO06__GPT_MUX_INOUT8                 0x0028 0x032c 0x0718 0x03 0x00
+#define IMX94_PAD_GPIO_IO06__LPSPI7_SOUT                    0x0028 0x032c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO06__LPUART6_CTS_B                  0x0028 0x032c 0x07c4 0x05 0x00
+#define IMX94_PAD_GPIO_IO06__LPI2C7_SDA                     0x0028 0x032c 0x0754 0x06 0x00
+#define IMX94_PAD_GPIO_IO06__FLEXIO1_FLEXIO6                0x0028 0x032c 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO07__GPIO2_IO7                      0x002c 0x0330 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO07__LPSPI3_PCS1                    0x002c 0x0330 0x0768 0x01 0x00
+#define IMX94_PAD_GPIO_IO07__XBAR1_XBAR_INOUT43             0x002c 0x0330 0x08e4 0x02 0x00
+#define IMX94_PAD_GPIO_IO07__GPT_MUX_INOUT3                 0x002c 0x0330 0x0704 0x03 0x00
+#define IMX94_PAD_GPIO_IO07__LPSPI7_SCK                     0x002c 0x0330 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO07__LPUART6_RTS_B                  0x002c 0x0330 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO07__LPI2C7_SCL                     0x002c 0x0330 0x0750 0x06 0x00
+#define IMX94_PAD_GPIO_IO07__FLEXIO1_FLEXIO7                0x002c 0x0330 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO08__GPIO2_IO8                      0x0030 0x0334 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO08__LPSPI3_PCS0                    0x0030 0x0334 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO08__USDHC2_WP                      0x0030 0x0334 0x0854 0x02 0x00
+#define IMX94_PAD_GPIO_IO08__GPT_MUX_INOUT2                 0x0030 0x0334 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO08__TPM6_CH0                       0x0030 0x0334 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO08__LPUART7_TX                     0x0030 0x0334 0x07d4 0x05 0x00
+#define IMX94_PAD_GPIO_IO08__LPI2C7_SDA                     0x0030 0x0334 0x0754 0x06 0x01
+#define IMX94_PAD_GPIO_IO08__FLEXIO1_FLEXIO8                0x0030 0x0334 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO09__GPIO2_IO9                      0x0034 0x0338 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO09__LPSPI3_SIN                     0x0034 0x0338 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO09__XBAR1_XBAR_INOUT44             0x0034 0x0338 0x08e8 0x02 0x00
+#define IMX94_PAD_GPIO_IO09__GPT_MUX_INOUT0                 0x0034 0x0338 0x06fc 0x03 0x00
+#define IMX94_PAD_GPIO_IO09__TPM3_EXTCLK                    0x0034 0x0338 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO09__LPUART7_RX                     0x0034 0x0338 0x07d0 0x05 0x00
+#define IMX94_PAD_GPIO_IO09__LPI2C7_SCL                     0x0034 0x0338 0x0750 0x06 0x01
+#define IMX94_PAD_GPIO_IO09__FLEXIO1_FLEXIO9                0x0034 0x0338 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO10__GPIO2_IO10                     0x0038 0x033c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO10__LPSPI3_SOUT                    0x0038 0x033c 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO10__XBAR1_XBAR_INOUT45             0x0038 0x033c 0x08ec 0x02 0x00
+#define IMX94_PAD_GPIO_IO10__GPT_MUX_INOUT6                 0x0038 0x033c 0x0710 0x03 0x00
+#define IMX94_PAD_GPIO_IO10__TPM4_EXTCLK                    0x0038 0x033c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO10__LPUART7_CTS_B                  0x0038 0x033c 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO10__LPI2C8_SDA                     0x0038 0x033c 0x075c 0x06 0x00
+#define IMX94_PAD_GPIO_IO10__FLEXIO1_FLEXIO10               0x0038 0x033c 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO11__GPIO2_IO11                     0x003c 0x0340 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO11__LPSPI3_SCK                     0x003c 0x0340 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO11__XBAR1_XBAR_INOUT46             0x003c 0x0340 0x08f0 0x02 0x00
+#define IMX94_PAD_GPIO_IO11__GPT_MUX_INOUT9                 0x003c 0x0340 0x071c 0x03 0x00
+#define IMX94_PAD_GPIO_IO11__TPM5_EXTCLK                    0x003c 0x0340 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO11__LPUART7_RTS_B                  0x003c 0x0340 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO11__LPI2C8_SCL                     0x003c 0x0340 0x0758 0x06 0x00
+#define IMX94_PAD_GPIO_IO11__FLEXIO1_FLEXIO11               0x003c 0x0340 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO12__GPIO2_IO12                     0x0040 0x0344 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO12__TPM3_CH2                       0x0040 0x0344 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO12__PDM_BIT_STREAM2                0x0040 0x0344 0x0618 0x02 0x00
+#define IMX94_PAD_GPIO_IO12__FLEXIO1_FLEXIO12               0x0040 0x0344 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO12__LPSPI8_PCS0                    0x0040 0x0344 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO12__LPUART8_TX                     0x0040 0x0344 0x07dc 0x05 0x01
+#define IMX94_PAD_GPIO_IO12__LPI2C8_SDA                     0x0040 0x0344 0x075c 0x06 0x01
+
+#define IMX94_PAD_GPIO_IO13__GPIO2_IO13                     0x0044 0x0348 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO13__TPM4_CH2                       0x0044 0x0348 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO13__PDM_BIT_STREAM3                0x0044 0x0348 0x061c 0x02 0x00
+#define IMX94_PAD_GPIO_IO13__XBAR1_XBAR_INOUT47             0x0044 0x0348 0x08f4 0x03 0x00
+#define IMX94_PAD_GPIO_IO13__LPSPI8_SIN                     0x0044 0x0348 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO13__LPUART8_RX                     0x0044 0x0348 0x07d8 0x05 0x01
+#define IMX94_PAD_GPIO_IO13__LPI2C8_SCL                     0x0044 0x0348 0x0758 0x06 0x01
+#define IMX94_PAD_GPIO_IO13__FLEXIO1_FLEXIO13               0x0044 0x0348 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO14__GPIO2_IO14                     0x0048 0x034c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO14__LPUART10_CTS_B                 0x0048 0x034c 0x078c 0x01 0x00
+#define IMX94_PAD_GPIO_IO14__ECAT_SDA                       0x0048 0x034c 0x062c 0x02 0x00
+#define IMX94_PAD_GPIO_IO14__XBAR1_XBAR_INOUT48             0x0048 0x034c 0x08f8 0x03 0x00
+#define IMX94_PAD_GPIO_IO14__LPSPI8_SOUT                    0x0048 0x034c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO14__LPUART8_CTS_B                  0x0048 0x034c 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO14__LPUART4_TX                     0x0048 0x034c 0x07b4 0x06 0x00
+#define IMX94_PAD_GPIO_IO14__FLEXIO1_FLEXIO14               0x0048 0x034c 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO15__GPIO2_IO15                     0x004c 0x0350 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO15__LPUART10_RTS_B                 0x004c 0x0350 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO15__ECAT_SCL                       0x004c 0x0350 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO15__XBAR1_XBAR_INOUT8              0x004c 0x0350 0x087c 0x03 0x00
+#define IMX94_PAD_GPIO_IO15__LPSPI8_SCK                     0x004c 0x0350 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO15__LPUART8_RTS_B                  0x004c 0x0350 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO15__LPUART4_RX                     0x004c 0x0350 0x07b0 0x06 0x00
+#define IMX94_PAD_GPIO_IO15__FLEXIO1_FLEXIO15               0x004c 0x0350 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO16__GPIO2_IO16                     0x0050 0x0354 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO16__LPI2C3_SDA                     0x0050 0x0354 0x0730 0x01 0x00
+#define IMX94_PAD_GPIO_IO16__CAN3_TX                        0x0050 0x0354 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO16__EWM_OUT_B                      0x0050 0x0354 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO16__LPUART11_TX                    0x0050 0x0354 0x079c 0x04 0x00
+#define IMX94_PAD_GPIO_IO16__GPT_MUX_INOUT0                 0x0050 0x0354 0x06fc 0x05 0x01
+#define IMX94_PAD_GPIO_IO16__FLEXPWM4_PWMA0                 0x0050 0x0354 0x06d4 0x06 0x00
+#define IMX94_PAD_GPIO_IO16__XBAR1_XBAR_INOUT30             0x0050 0x0354 0x08b0 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO17__GPIO2_IO17                     0x0054 0x0358 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO17__LPI2C3_SCL                     0x0054 0x0358 0x072c 0x01 0x00
+#define IMX94_PAD_GPIO_IO17__CAN3_RX                        0x0054 0x0358 0x0680 0x02 0x00
+#define IMX94_PAD_GPIO_IO17__LPI2C6_HREQ                    0x0054 0x0358 0x0744 0x03 0x00
+#define IMX94_PAD_GPIO_IO17__LPUART11_RX                    0x0054 0x0358 0x0798 0x04 0x00
+#define IMX94_PAD_GPIO_IO17__GPT_MUX_INOUT3                 0x0054 0x0358 0x0704 0x05 0x01
+#define IMX94_PAD_GPIO_IO17__FLEXPWM4_PWMB0                 0x0054 0x0358 0x06e4 0x06 0x00
+#define IMX94_PAD_GPIO_IO17__XBAR1_XBAR_INOUT31             0x0054 0x0358 0x08b4 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO18__GPIO2_IO18                     0x0058 0x035c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO18__LPI2C4_SDA                     0x0058 0x035c 0x0738 0x01 0x00
+#define IMX94_PAD_GPIO_IO18__LPUART10_TX                    0x0058 0x035c 0x0794 0x02 0x00
+#define IMX94_PAD_GPIO_IO18__LPI2C7_HREQ                    0x0058 0x035c 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO18__LPUART11_CTS_B                 0x0058 0x035c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO18__GPT_MUX_INOUT6                 0x0058 0x035c 0x0710 0x05 0x01
+#define IMX94_PAD_GPIO_IO18__FLEXPWM4_PWMA1                 0x0058 0x035c 0x06d8 0x06 0x00
+#define IMX94_PAD_GPIO_IO18__XBAR1_XBAR_INOUT32             0x0058 0x035c 0x08b8 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO19__GPIO2_IO19                     0x005c 0x0360 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO19__LPI2C4_SCL                     0x005c 0x0360 0x0734 0x01 0x00
+#define IMX94_PAD_GPIO_IO19__LPUART10_RX                    0x005c 0x0360 0x0790 0x02 0x00
+#define IMX94_PAD_GPIO_IO19__LPI2C8_HREQ                    0x005c 0x0360 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO19__LPUART11_RTS_B                 0x005c 0x0360 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO19__GPT_MUX_INOUT9                 0x005c 0x0360 0x071c 0x05 0x01
+#define IMX94_PAD_GPIO_IO19__FLEXPWM4_PWMB1                 0x005c 0x0360 0x06e8 0x06 0x00
+#define IMX94_PAD_GPIO_IO19__XBAR1_XBAR_INOUT33             0x005c 0x0360 0x08bc 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO20__GPIO2_IO20                     0x0060 0x0364 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO20__PCIE1_CLKREQ_B                 0x0060 0x0364 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO20__LPUART6_TX                     0x0060 0x0364 0x07cc 0x02 0x01
+#define IMX94_PAD_GPIO_IO20__LPI2C8_SDA                     0x0060 0x0364 0x075c 0x03 0x02
+#define IMX94_PAD_GPIO_IO20__LPSPI4_PCS2                    0x0060 0x0364 0x076c 0x04 0x00
+#define IMX94_PAD_GPIO_IO20__LPSPI3_PCS1                    0x0060 0x0364 0x0768 0x05 0x01
+#define IMX94_PAD_GPIO_IO20__FLEXPWM4_PWMA2                 0x0060 0x0364 0x06dc 0x06 0x00
+#define IMX94_PAD_GPIO_IO20__XBAR1_XBAR_INOUT34             0x0060 0x0364 0x08c0 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO21__GPIO2_IO21                     0x0064 0x0368 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO21__SAI2_TX_BCLK                   0x0064 0x0368 0x07f8 0x01 0x00
+#define IMX94_PAD_GPIO_IO21__LPUART6_RX                     0x0064 0x0368 0x07c8 0x02 0x01
+#define IMX94_PAD_GPIO_IO21__LPI2C8_SCL                     0x0064 0x0368 0x0758 0x03 0x02
+#define IMX94_PAD_GPIO_IO21__LPSPI4_PCS1                    0x0064 0x0368 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO21__LPI2C3_HREQ                    0x0064 0x0368 0x0728 0x05 0x00
+#define IMX94_PAD_GPIO_IO21__FLEXPWM4_PWMB2                 0x0064 0x0368 0x06ec 0x06 0x00
+#define IMX94_PAD_GPIO_IO21__XBAR1_XBAR_INOUT35             0x0064 0x0368 0x08c4 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO22__GPIO2_IO22                     0x0068 0x036c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO22__SAI2_MCLK                      0x0068 0x036c 0x07e8 0x01 0x00
+#define IMX94_PAD_GPIO_IO22__LPUART6_CTS_B                  0x0068 0x036c 0x07c4 0x02 0x01
+#define IMX94_PAD_GPIO_IO22__XBAR1_XBAR_INOUT9              0x0068 0x036c 0x0880 0x03 0x00
+#define IMX94_PAD_GPIO_IO22__LPSPI4_PCS0                    0x0068 0x036c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO22__FLEXPWM3_PWMA3                 0x0068 0x036c 0x06b4 0x05 0x00
+#define IMX94_PAD_GPIO_IO22__FLEXPWM4_PWMA3                 0x0068 0x036c 0x06e0 0x06 0x00
+#define IMX94_PAD_GPIO_IO22__SINC4_EMCLK0                   0x0068 0x036c 0x082c 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO23__GPIO2_IO23                     0x006c 0x0370 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO23__PCIE2_CLKREQ_B                 0x006c 0x0370 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO23__LPUART6_RTS_B                  0x006c 0x0370 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO23__XBAR1_XBAR_INOUT10             0x006c 0x0370 0x0884 0x03 0x00
+#define IMX94_PAD_GPIO_IO23__LPSPI4_SIN                     0x006c 0x0370 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO23__FLEXPWM3_PWMB3                 0x006c 0x0370 0x06c4 0x05 0x00
+#define IMX94_PAD_GPIO_IO23__FLEXPWM4_PWMB3                 0x006c 0x0370 0x06f0 0x06 0x00
+#define IMX94_PAD_GPIO_IO23__SINC4_EMBIT0                   0x006c 0x0370 0x0820 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO24__GPIO2_IO24                     0x0070 0x0374 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO24__SAI2_RX_BCLK                   0x0070 0x0374 0x07ec 0x01 0x00
+#define IMX94_PAD_GPIO_IO24__LPUART11_TX                    0x0070 0x0374 0x079c 0x02 0x01
+#define IMX94_PAD_GPIO_IO24__LPI2C3_HREQ                    0x0070 0x0374 0x0728 0x03 0x01
+#define IMX94_PAD_GPIO_IO24__LPSPI4_SOUT                    0x0070 0x0374 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO24__SINC_FILTER_GLUE2_BREAK        0x0070 0x0374 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO24__FLEXPWM4_PWMX0                 0x0070 0x0374 0x06f4 0x06 0x00
+#define IMX94_PAD_GPIO_IO24__XBAR1_XBAR_INOUT36             0x0070 0x0374 0x08c8 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO25__GPIO2_IO25                     0x0074 0x0378 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO25__SAI2_RX_SYNC                   0x0074 0x0378 0x07f4 0x01 0x00
+#define IMX94_PAD_GPIO_IO25__LPUART11_RX                    0x0074 0x0378 0x0798 0x02 0x01
+#define IMX94_PAD_GPIO_IO25__LPI2C4_HREQ                    0x0074 0x0378 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO25__LPSPI4_SCK                     0x0074 0x0378 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO25__SINC_FILTER_GLUE1_BREAK        0x0074 0x0378 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO25__FLEXPWM4_PWMX1                 0x0074 0x0378 0x06f8 0x06 0x00
+#define IMX94_PAD_GPIO_IO25__XBAR1_XBAR_INOUT37             0x0074 0x0378 0x08cc 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO26__GPIO2_IO26                     0x0078 0x037c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO26__LPI2C5_SCL                     0x0078 0x037c 0x073c 0x01 0x01
+#define IMX94_PAD_GPIO_IO26__LPUART12_TX                    0x0078 0x037c 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO26__GPT_MUX_INOUT4                 0x0078 0x037c 0x0708 0x03 0x01
+#define IMX94_PAD_GPIO_IO26__FLEXIO1_3_1_FLEXIO0            0x0078 0x037c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO26__SAI2_RX_DATA0                  0x0078 0x037c 0x07f0 0x05 0x00
+#define IMX94_PAD_GPIO_IO26__FLEXPWM4_PWMX2                 0x0078 0x037c 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO26__XBAR1_XBAR_INOUT38             0x0078 0x037c 0x08d0 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO27__GPIO2_IO27                     0x007c 0x0380 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO27__LPI2C5_SDA                     0x007c 0x0380 0x0740 0x01 0x01
+#define IMX94_PAD_GPIO_IO27__LPUART12_RX                    0x007c 0x0380 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO27__GPT_MUX_INOUT5                 0x007c 0x0380 0x070c 0x03 0x01
+#define IMX94_PAD_GPIO_IO27__FLEXIO1_3_1_FLEXIO1            0x007c 0x0380 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO27__SAI2_TX_DATA0                  0x007c 0x0380 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO27__FLEXPWM4_PWMX3                 0x007c 0x0380 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO27__SINC4_MOD_CLK0                 0x007c 0x0380 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO28__GPIO2_IO28                     0x0080 0x0384 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO28__LPI2C6_SCL                     0x0080 0x0384 0x0748 0x01 0x02
+#define IMX94_PAD_GPIO_IO28__LPUART12_CTS_B                 0x0080 0x0384 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO28__GPT_MUX_INOUT7                 0x0080 0x0384 0x0714 0x03 0x01
+#define IMX94_PAD_GPIO_IO28__FLEXIO1_3_1_FLEXIO2            0x0080 0x0384 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO28__SAI2_TX_SYNC                   0x0080 0x0384 0x07fc 0x05 0x00
+#define IMX94_PAD_GPIO_IO28__FLEXPWM1_PWMX2                 0x0080 0x0384 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO28__XBAR1_XBAR_INOUT4              0x0080 0x0384 0x086c 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO29__GPIO2_IO29                     0x0084 0x0388 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO29__LPI2C6_SDA                     0x0084 0x0388 0x074c 0x01 0x02
+#define IMX94_PAD_GPIO_IO29__LPUART12_RTS_B                 0x0084 0x0388 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO29__I3C2_SDA                       0x0084 0x0388 0x0724 0x03 0x01
+#define IMX94_PAD_GPIO_IO29__FLEXIO1_3_1_FLEXIO3            0x0084 0x0388 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO29__FLEXPWM3_PWMX0                 0x0084 0x0388 0x06c8 0x05 0x00
+#define IMX94_PAD_GPIO_IO29__FLEXPWM1_PWMX3                 0x0084 0x0388 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO29__XBAR1_XBAR_INOUT5              0x0084 0x0388 0x0870 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO30__GPIO2_IO30                     0x0088 0x038c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO30__LPIT2_TRIGGER0                 0x0088 0x038c 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO30__LPUART3_TX                     0x0088 0x038c 0x07a8 0x02 0x00
+#define IMX94_PAD_GPIO_IO30__I3C2_PUR                       0x0088 0x038c 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO30__FLEXIO1_3_1_FLEXIO4            0x0088 0x038c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO30__I3C2_PUR_B                     0x0088 0x038c 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO30__FLEXPWM2_PWMX2                 0x0088 0x038c 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO30__XBAR1_XBAR_INOUT6              0x0088 0x038c 0x0874 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO31__GPIO2_IO31                     0x008c 0x0390 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO31__LPIT2_TRIGGER1                 0x008c 0x0390 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO31__LPUART3_RX                     0x008c 0x0390 0x07a4 0x02 0x00
+#define IMX94_PAD_GPIO_IO31__I3C2_SCL                       0x008c 0x0390 0x0720 0x03 0x01
+#define IMX94_PAD_GPIO_IO31__FLEXIO1_3_1_FLEXIO5            0x008c 0x0390 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO31__FLEXPWM3_PWMX1                 0x008c 0x0390 0x06cc 0x05 0x00
+#define IMX94_PAD_GPIO_IO31__FLEXPWM2_PWMX3                 0x008c 0x0390 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO31__XBAR1_XBAR_INOUT7              0x008c 0x0390 0x0878 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO32__GPIO3_IO0                      0x0090 0x0394 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO32__LPIT3_TRIGGER0                 0x0090 0x0394 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO32__LPUART7_TX                     0x0090 0x0394 0x07d4 0x02 0x01
+#define IMX94_PAD_GPIO_IO32__GPT_MUX_INOUT8                 0x0090 0x0394 0x0718 0x03 0x01
+#define IMX94_PAD_GPIO_IO32__FLEXIO1_3_1_FLEXIO6            0x0090 0x0394 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO32__FLEXPWM3_PWMA0                 0x0090 0x0394 0x06a8 0x05 0x00
+#define IMX94_PAD_GPIO_IO32__SINC_FILTER_GLUE2_BREAK        0x0090 0x0394 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO32__XBAR1_XBAR_INOUT8              0x0090 0x0394 0x087c 0x07 0x01
+
+#define IMX94_PAD_GPIO_IO33__GPIO3_IO1                      0x0094 0x0398 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO33__LPIT3_TRIGGER1                 0x0094 0x0398 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO33__LPUART7_RX                     0x0094 0x0398 0x07d0 0x02 0x01
+#define IMX94_PAD_GPIO_IO33__GPT_MUX_INOUT1                 0x0094 0x0398 0x0700 0x03 0x01
+#define IMX94_PAD_GPIO_IO33__FLEXIO1_3_1_FLEXIO7            0x0094 0x0398 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO33__FLEXPWM3_PWMB0                 0x0094 0x0398 0x06b8 0x05 0x00
+#define IMX94_PAD_GPIO_IO33__SINC_FILTER_GLUE1_BREAK        0x0094 0x0398 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO33__XBAR1_XBAR_INOUT9              0x0094 0x0398 0x0880 0x07 0x01
+
+#define IMX94_PAD_GPIO_IO34__GPIO3_IO2                      0x0098 0x039c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO34__LPI2C7_SDA                     0x0098 0x039c 0x0754 0x01 0x02
+#define IMX94_PAD_GPIO_IO34__CAN2_TX                        0x0098 0x039c 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO34__ECAT_SDA                       0x0098 0x039c 0x062c 0x03 0x01
+#define IMX94_PAD_GPIO_IO34__FLEXIO1_3_1_FLEXIO8            0x0098 0x039c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO34__FLEXPWM3_PWMA1                 0x0098 0x039c 0x06ac 0x05 0x00
+#define IMX94_PAD_GPIO_IO34__FLEXPWM1_PWMX0                 0x0098 0x039c 0x0698 0x06 0x00
+#define IMX94_PAD_GPIO_IO34__XBAR1_XBAR_INOUT10             0x0098 0x039c 0x0884 0x07 0x01
+
+#define IMX94_PAD_GPIO_IO35__GPIO3_IO3                      0x009c 0x03a0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO35__LPI2C7_SCL                     0x009c 0x03a0 0x0750 0x01 0x02
+#define IMX94_PAD_GPIO_IO35__CAN2_RX                        0x009c 0x03a0 0x067c 0x02 0x01
+#define IMX94_PAD_GPIO_IO35__ECAT_SCL                       0x009c 0x03a0 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO35__FLEXIO1_3_1_FLEXIO9            0x009c 0x03a0 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO35__FLEXPWM3_PWMB1                 0x009c 0x03a0 0x06bc 0x05 0x00
+#define IMX94_PAD_GPIO_IO35__FLEXPWM1_PWMX1                 0x009c 0x03a0 0x069c 0x06 0x00
+#define IMX94_PAD_GPIO_IO35__XBAR1_XBAR_INOUT11             0x009c 0x03a0 0x0888 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO36__USDHC2_WP                      0x00a0 0x03a4 0x0854 0x03 0x01
+#define IMX94_PAD_GPIO_IO36__FLEXIO1_3_1_FLEXIO10           0x00a0 0x03a4 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO36__FLEXPWM3_PWMA2                 0x00a0 0x03a4 0x06b0 0x05 0x00
+#define IMX94_PAD_GPIO_IO36__FLEXPWM2_PWMX0                 0x00a0 0x03a4 0x06a0 0x06 0x00
+#define IMX94_PAD_GPIO_IO36__XBAR1_XBAR_INOUT12             0x00a0 0x03a4 0x088c 0x07 0x00
+#define IMX94_PAD_GPIO_IO36__GPIO3_IO4                      0x00a0 0x03a4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO36__LPI2C8_SDA                     0x00a0 0x03a4 0x075c 0x01 0x03
+#define IMX94_PAD_GPIO_IO36__CAN4_TX                        0x00a0 0x03a4 0x0000 0x02 0x00
+
+#define IMX94_PAD_GPIO_IO37__GPIO3_IO5                      0x00a4 0x03a8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO37__LPI2C8_SCL                     0x00a4 0x03a8 0x0758 0x01 0x03
+#define IMX94_PAD_GPIO_IO37__CAN4_RX                        0x00a4 0x03a8 0x0684 0x02 0x00
+#define IMX94_PAD_GPIO_IO37__LPI2C5_HREQ                    0x00a4 0x03a8 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO37__FLEXIO1_3_1_FLEXIO11           0x00a4 0x03a8 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO37__FLEXPWM3_PWMB2                 0x00a4 0x03a8 0x06c0 0x05 0x00
+#define IMX94_PAD_GPIO_IO37__FLEXPWM2_PWMX1                 0x00a4 0x03a8 0x06a4 0x06 0x00
+#define IMX94_PAD_GPIO_IO37__XBAR1_XBAR_INOUT13             0x00a4 0x03a8 0x0890 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO38__GPIO3_IO6                      0x00a8 0x03ac 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO38__NETC_1588MUX_INOUT0            0x00a8 0x03ac 0x064c 0x01 0x00
+#define IMX94_PAD_GPIO_IO38__LPI2C3_SDA                     0x00a8 0x03ac 0x0730 0x02 0x01
+#define IMX94_PAD_GPIO_IO38__LPIT3_TRIGGER2                 0x00a8 0x03ac 0x0764 0x03 0x00
+#define IMX94_PAD_GPIO_IO38__FLEXIO1_3_1_FLEXIO12           0x00a8 0x03ac 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO38__LPUART3_CTS_B                  0x00a8 0x03ac 0x07a0 0x05 0x00
+#define IMX94_PAD_GPIO_IO38__FLEXPWM3_PWMX0                 0x00a8 0x03ac 0x06c8 0x06 0x01
+#define IMX94_PAD_GPIO_IO38__XBAR1_XBAR_INOUT14             0x00a8 0x03ac 0x0894 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO39__GPIO3_IO7                      0x00ac 0x03b0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO39__NETC_1588MUX_INOUT1            0x00ac 0x03b0 0x0650 0x01 0x00
+#define IMX94_PAD_GPIO_IO39__LPI2C3_SCL                     0x00ac 0x03b0 0x072c 0x02 0x01
+#define IMX94_PAD_GPIO_IO39__LPIT2_TRIGGER2                 0x00ac 0x03b0 0x0760 0x03 0x00
+#define IMX94_PAD_GPIO_IO39__FLEXIO1_3_1_FLEXIO13           0x00ac 0x03b0 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO39__LPUART3_RTS_B                  0x00ac 0x03b0 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO39__FLEXPWM3_PWMX1                 0x00ac 0x03b0 0x06cc 0x06 0x01
+#define IMX94_PAD_GPIO_IO39__XBAR1_XBAR_INOUT15             0x00ac 0x03b0 0x0898 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO40__GPIO3_IO8                      0x00b0 0x03b4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO40__NETC_1588MUX_INOUT2            0x00b0 0x03b4 0x0654 0x01 0x00
+#define IMX94_PAD_GPIO_IO40__LPI2C7_SDA                     0x00b0 0x03b4 0x0754 0x02 0x03
+#define IMX94_PAD_GPIO_IO40__LPUART4_TX                     0x00b0 0x03b4 0x07b4 0x03 0x01
+#define IMX94_PAD_GPIO_IO40__FLEXIO1_3_1_FLEXIO14           0x00b0 0x03b4 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO40__FLEXPWM3_PWMX2                 0x00b0 0x03b4 0x06d0 0x05 0x00
+#define IMX94_PAD_GPIO_IO40__FLEXPWM4_PWMX0                 0x00b0 0x03b4 0x06f4 0x06 0x01
+#define IMX94_PAD_GPIO_IO40__XBAR1_XBAR_INOUT16             0x00b0 0x03b4 0x089c 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO41__GPIO3_IO9                      0x00b4 0x03b8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO41__NETC_1588MUX_INOUT3            0x00b4 0x03b8 0x0658 0x01 0x00
+#define IMX94_PAD_GPIO_IO41__LPI2C7_SCL                     0x00b4 0x03b8 0x0750 0x02 0x03
+#define IMX94_PAD_GPIO_IO41__LPUART4_RX                     0x00b4 0x03b8 0x07b0 0x03 0x01
+#define IMX94_PAD_GPIO_IO41__FLEXIO1_3_1_FLEXIO15           0x00b4 0x03b8 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO41__LPI2C6_HREQ                    0x00b4 0x03b8 0x0744 0x05 0x01
+#define IMX94_PAD_GPIO_IO41__FLEXPWM4_PWMX1                 0x00b4 0x03b8 0x06f8 0x06 0x01
+#define IMX94_PAD_GPIO_IO41__XBAR1_XBAR_INOUT17             0x00b4 0x03b8 0x08a0 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO42__GPIO3_IO10                     0x00b8 0x03bc 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO42__SAI3_TX_BCLK                   0x00b8 0x03bc 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO42__PDM_BIT_STREAM2                0x00b8 0x03bc 0x0618 0x02 0x01
+#define IMX94_PAD_GPIO_IO42__XBAR1_XBAR_INOUT11             0x00b8 0x03bc 0x0888 0x03 0x01
+#define IMX94_PAD_GPIO_IO42__LPUART3_TX                     0x00b8 0x03bc 0x07a8 0x04 0x01
+#define IMX94_PAD_GPIO_IO42__LPSPI4_PCS2                    0x00b8 0x03bc 0x076c 0x05 0x01
+#define IMX94_PAD_GPIO_IO42__LPUART4_CTS_B                  0x00b8 0x03bc 0x07ac 0x06 0x00
+#define IMX94_PAD_GPIO_IO42__SINC4_EMCLK1                   0x00b8 0x03bc 0x0830 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO43__GPIO3_IO11                     0x00bc 0x03c0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO43__SAI3_MCLK                      0x00bc 0x03c0 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO43__XBAR1_XBAR_INOUT12             0x00bc 0x03c0 0x088c 0x03 0x01
+#define IMX94_PAD_GPIO_IO43__LPUART3_RX                     0x00bc 0x03c0 0x07a4 0x04 0x01
+#define IMX94_PAD_GPIO_IO43__LPSPI3_PCS1                    0x00bc 0x03c0 0x0768 0x05 0x02
+#define IMX94_PAD_GPIO_IO43__LPUART4_RTS_B                  0x00bc 0x03c0 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO43__SINC4_EMBIT1                   0x00bc 0x03c0 0x0824 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO44__GPIO3_IO12                     0x00c0 0x03c4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO44__SAI3_RX_BCLK                   0x00c0 0x03c4 0x0800 0x01 0x00
+#define IMX94_PAD_GPIO_IO44__PDM_BIT_STREAM1                0x00c0 0x03c4 0x0614 0x02 0x01
+#define IMX94_PAD_GPIO_IO44__LPUART9_TX                     0x00c0 0x03c4 0x07e4 0x03 0x00
+#define IMX94_PAD_GPIO_IO44__LPSPI5_PCS0                    0x00c0 0x03c4 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO44__LPI2C3_SDA                     0x00c0 0x03c4 0x0730 0x05 0x02
+#define IMX94_PAD_GPIO_IO44__TPM5_CH2                       0x00c0 0x03c4 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO44__SINC_FILTER_GLUE4_BREAK        0x00c0 0x03c4 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO45__GPIO3_IO13                     0x00c4 0x03c8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO45__SAI3_RX_SYNC                   0x00c4 0x03c8 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO45__PDM_BIT_STREAM3                0x00c4 0x03c8 0x061c 0x02 0x01
+#define IMX94_PAD_GPIO_IO45__LPUART9_RX                     0x00c4 0x03c8 0x07e0 0x03 0x00
+#define IMX94_PAD_GPIO_IO45__LPSPI5_SIN                     0x00c4 0x03c8 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO45__LPI2C3_SCL                     0x00c4 0x03c8 0x072c 0x05 0x02
+#define IMX94_PAD_GPIO_IO45__TPM6_CH2                       0x00c4 0x03c8 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO45__SAI3_TX_DATA0                  0x00c4 0x03c8 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO46__GPIO3_IO14                     0x00c8 0x03cc 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO46__SAI3_RX_DATA0                  0x00c8 0x03cc 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO46__PDM_BIT_STREAM0                0x00c8 0x03cc 0x0610 0x02 0x01
+#define IMX94_PAD_GPIO_IO46__LPUART9_CTS_B                  0x00c8 0x03cc 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO46__LPSPI5_SOUT                    0x00c8 0x03cc 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO46__LPI2C4_SDA                     0x00c8 0x03cc 0x0738 0x05 0x01
+#define IMX94_PAD_GPIO_IO46__TPM3_CH1                       0x00c8 0x03cc 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO46__EWM_OUT_B                      0x00c8 0x03cc 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO47__GPIO3_IO15                     0x00cc 0x03d0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO47__SAI3_TX_DATA0                  0x00cc 0x03d0 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO47__PDM_CLK                        0x00cc 0x03d0 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO47__LPUART9_RTS_B                  0x00cc 0x03d0 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO47__LPSPI5_SCK                     0x00cc 0x03d0 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO47__LPI2C4_SCL                     0x00cc 0x03d0 0x0734 0x05 0x01
+#define IMX94_PAD_GPIO_IO47__TPM4_CH1                       0x00cc 0x03d0 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO47__SAI3_RX_BCLK                   0x00cc 0x03d0 0x0800 0x07 0x01
+
+#define IMX94_PAD_GPIO_IO48__GPIO3_IO16                     0x00d0 0x03d4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO48__USDHC3_CLK                     0x00d0 0x03d4 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO48__CAN5_TX                        0x00d0 0x03d4 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO48__LPUART10_TX                    0x00d0 0x03d4 0x0794 0x03 0x01
+#define IMX94_PAD_GPIO_IO48__TPM5_CH1                       0x00d0 0x03d4 0x0840 0x04 0x00
+#define IMX94_PAD_GPIO_IO48__TPM6_EXTCLK                    0x00d0 0x03d4 0x0850 0x05 0x00
+#define IMX94_PAD_GPIO_IO48__LPI2C5_SDA                     0x00d0 0x03d4 0x0740 0x06 0x02
+#define IMX94_PAD_GPIO_IO48__SINC4_EMCLK2                   0x00d0 0x03d4 0x0834 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO49__GPIO3_IO17                     0x00d4 0x03d8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO49__USDHC3_CMD                     0x00d4 0x03d8 0x0858 0x01 0x00
+#define IMX94_PAD_GPIO_IO49__CAN5_RX                        0x00d4 0x03d8 0x0688 0x02 0x01
+#define IMX94_PAD_GPIO_IO49__LPUART10_RX                    0x00d4 0x03d8 0x0790 0x03 0x01
+#define IMX94_PAD_GPIO_IO49__TPM6_CH1                       0x00d4 0x03d8 0x0848 0x04 0x00
+#define IMX94_PAD_GPIO_IO49__XBAR1_XBAR_INOUT13             0x00d4 0x03d8 0x0890 0x05 0x01
+#define IMX94_PAD_GPIO_IO49__LPI2C5_SCL                     0x00d4 0x03d8 0x073c 0x06 0x02
+#define IMX94_PAD_GPIO_IO49__SINC4_EMBIT2                   0x00d4 0x03d8 0x0828 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO50__GPIO3_IO18                     0x00d8 0x03dc 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO50__USDHC3_DATA0                   0x00d8 0x03dc 0x085c 0x01 0x00
+#define IMX94_PAD_GPIO_IO50__XBAR1_XBAR_INOUT14             0x00d8 0x03dc 0x0894 0x02 0x01
+#define IMX94_PAD_GPIO_IO50__LPUART10_CTS_B                 0x00d8 0x03dc 0x078c 0x03 0x01
+#define IMX94_PAD_GPIO_IO50__TPM3_CH3                       0x00d8 0x03dc 0x0838 0x04 0x00
+#define IMX94_PAD_GPIO_IO50__JTAG_MUX_TDO                   0x00d8 0x03dc 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO50__LPSPI6_PCS1                    0x00d8 0x03dc 0x0774 0x06 0x00
+#define IMX94_PAD_GPIO_IO50__SINC4_EMCLK3                   0x00d8 0x03dc 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO51__GPIO3_IO19                     0x00dc 0x03e0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO51__USDHC3_DATA1                   0x00dc 0x03e0 0x0860 0x01 0x00
+#define IMX94_PAD_GPIO_IO51__CAN2_TX                        0x00dc 0x03e0 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO51__LPUART10_RTS_B                 0x00dc 0x03e0 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO51__TPM4_CH3                       0x00dc 0x03e0 0x083c 0x04 0x00
+#define IMX94_PAD_GPIO_IO51__JTAG_MUX_TCK                   0x00dc 0x03e0 0x0928 0x05 0x01
+#define IMX94_PAD_GPIO_IO51__LPSPI7_PCS1                    0x00dc 0x03e0 0x0778 0x06 0x00
+#define IMX94_PAD_GPIO_IO51__SINC4_EMBIT3                   0x00dc 0x03e0 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO52__GPIO3_IO20                     0x00e0 0x03e4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO52__USDHC3_DATA2                   0x00e0 0x03e4 0x0864 0x01 0x00
+#define IMX94_PAD_GPIO_IO52__PDM_BIT_STREAM1                0x00e0 0x03e4 0x0614 0x02 0x02
+#define IMX94_PAD_GPIO_IO52__LPSPI4_PCS2                    0x00e0 0x03e4 0x076c 0x03 0x02
+#define IMX94_PAD_GPIO_IO52__TPM5_CH3                       0x00e0 0x03e4 0x0844 0x04 0x00
+#define IMX94_PAD_GPIO_IO52__JTAG_MUX_TDI                   0x00e0 0x03e4 0x092c 0x05 0x01
+#define IMX94_PAD_GPIO_IO52__LPSPI8_PCS1                    0x00e0 0x03e4 0x077c 0x06 0x00
+#define IMX94_PAD_GPIO_IO52__SAI3_TX_SYNC                   0x00e0 0x03e4 0x0804 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO53__GPIO3_IO21                     0x00e4 0x03e8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO53__USDHC3_DATA3                   0x00e4 0x03e8 0x0868 0x01 0x00
+#define IMX94_PAD_GPIO_IO53__CAN2_RX                        0x00e4 0x03e8 0x067c 0x02 0x02
+#define IMX94_PAD_GPIO_IO53__LPSPI3_PCS1                    0x00e4 0x03e8 0x0768 0x03 0x03
+#define IMX94_PAD_GPIO_IO53__TPM6_CH3                       0x00e4 0x03e8 0x084c 0x04 0x00
+#define IMX94_PAD_GPIO_IO53__JTAG_MUX_TMS                   0x00e4 0x03e8 0x0930 0x05 0x01
+#define IMX94_PAD_GPIO_IO53__LPSPI5_PCS1                    0x00e4 0x03e8 0x0770 0x06 0x00
+#define IMX94_PAD_GPIO_IO53__SINC4_MOD_CLK1                 0x00e4 0x03e8 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO54__GPIO3_IO22                     0x00e8 0x03ec 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO54__NETC_1588MUX_INOUT4            0x00e8 0x03ec 0x065c 0x01 0x00
+#define IMX94_PAD_GPIO_IO54__CAN4_TX                        0x00e8 0x03ec 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO54__LPIT3_TRIGGER2                 0x00e8 0x03ec 0x0764 0x03 0x01
+#define IMX94_PAD_GPIO_IO54__LPSPI6_PCS1                    0x00e8 0x03ec 0x0774 0x04 0x01
+#define IMX94_PAD_GPIO_IO54__TPM3_CH3                       0x00e8 0x03ec 0x0838 0x05 0x01
+#define IMX94_PAD_GPIO_IO54__SINC3_EMCLK0                   0x00e8 0x03ec 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO54__XBAR1_XBAR_INOUT18             0x00e8 0x03ec 0x08a4 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO55__GPIO3_IO23                     0x00ec 0x03f0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO55__NETC_1588MUX_INOUT5            0x00ec 0x03f0 0x0660 0x01 0x00
+#define IMX94_PAD_GPIO_IO55__CAN4_RX                        0x00ec 0x03f0 0x0684 0x02 0x01
+#define IMX94_PAD_GPIO_IO55__LPIT2_TRIGGER2                 0x00ec 0x03f0 0x0760 0x03 0x01
+#define IMX94_PAD_GPIO_IO55__LPSPI7_PCS1                    0x00ec 0x03f0 0x0778 0x04 0x01
+#define IMX94_PAD_GPIO_IO55__TPM4_CH3                       0x00ec 0x03f0 0x083c 0x05 0x01
+#define IMX94_PAD_GPIO_IO55__SINC3_EMBIT0                   0x00ec 0x03f0 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO55__XBAR1_XBAR_INOUT19             0x00ec 0x03f0 0x08a8 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO56__GPIO3_IO24                     0x00f0 0x03f4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO56__NETC_1588MUX_INOUT6            0x00f0 0x03f4 0x0664 0x01 0x00
+#define IMX94_PAD_GPIO_IO56__CAN5_TX                        0x00f0 0x03f4 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO56__LPIT3_TRIGGER3                 0x00f0 0x03f4 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO56__LPSPI8_PCS1                    0x00f0 0x03f4 0x077c 0x04 0x01
+#define IMX94_PAD_GPIO_IO56__SAI3_TX_SYNC                   0x00f0 0x03f4 0x0804 0x05 0x01
+#define IMX94_PAD_GPIO_IO56__SINC3_EMCLK1                   0x00f0 0x03f4 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO56__XBAR1_XBAR_INOUT20             0x00f0 0x03f4 0x08ac 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO57__GPIO3_IO25                     0x00f4 0x03f8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO57__NETC_1588MUX_INOUT7            0x00f4 0x03f8 0x0668 0x01 0x00
+#define IMX94_PAD_GPIO_IO57__CAN5_RX                        0x00f4 0x03f8 0x0688 0x02 0x02
+#define IMX94_PAD_GPIO_IO57__LPIT2_TRIGGER3                 0x00f4 0x03f8 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO57__LPSPI5_PCS1                    0x00f4 0x03f8 0x0770 0x04 0x01
+#define IMX94_PAD_GPIO_IO57__TPM6_CH3                       0x00f4 0x03f8 0x084c 0x05 0x01
+#define IMX94_PAD_GPIO_IO57__SINC3_EMBIT1                   0x00f4 0x03f8 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO57__ENET_REF_CLK_ROOT              0x00f4 0x03f8 0x0000 0x07 0x00
+
+#define IMX94_PAD_CCM_CLKO1__CLKO_1                         0x00f8 0x03fc 0x0000 0x00 0x00
+#define IMX94_PAD_CCM_CLKO1__NETC_1588MUX_INOUT8            0x00f8 0x03fc 0x066c 0x01 0x00
+#define IMX94_PAD_CCM_CLKO1__LPUART9_TX                     0x00f8 0x03fc 0x07e4 0x02 0x01
+#define IMX94_PAD_CCM_CLKO1__ECAT_LED_RUN                   0x00f8 0x03fc 0x0000 0x03 0x00
+#define IMX94_PAD_CCM_CLKO1__TPM6_EXTCLK                    0x00f8 0x03fc 0x0850 0x04 0x01
+#define IMX94_PAD_CCM_CLKO1__GPIO4_IO0                      0x00f8 0x03fc 0x0000 0x05 0x00
+#define IMX94_PAD_CCM_CLKO1__SINC3_EMCLK2                   0x00f8 0x03fc 0x0000 0x06 0x00
+#define IMX94_PAD_CCM_CLKO1__XBAR1_XBAR_INOUT22             0x00f8 0x03fc 0x0000 0x07 0x00
+
+#define IMX94_PAD_CCM_CLKO2__CLKO_2                         0x00fc 0x0400 0x0000 0x00 0x00
+#define IMX94_PAD_CCM_CLKO2__NETC_1588MUX_INOUT9            0x00fc 0x0400 0x0670 0x01 0x00
+#define IMX94_PAD_CCM_CLKO2__LPUART9_RX                     0x00fc 0x0400 0x07e0 0x02 0x01
+#define IMX94_PAD_CCM_CLKO2__ECAT_LED_ERR                   0x00fc 0x0400 0x0000 0x03 0x00
+#define IMX94_PAD_CCM_CLKO2__TPM5_CH1                       0x00fc 0x0400 0x0840 0x04 0x01
+#define IMX94_PAD_CCM_CLKO2__GPIO4_IO1                      0x00fc 0x0400 0x0000 0x05 0x00
+#define IMX94_PAD_CCM_CLKO2__SINC3_EMBIT2                   0x00fc 0x0400 0x0000 0x06 0x00
+#define IMX94_PAD_CCM_CLKO2__XBAR1_XBAR_INOUT23             0x00fc 0x0400 0x0000 0x07 0x00
+
+#define IMX94_PAD_CCM_CLKO3__CLKO_3                         0x0100 0x0404 0x0000 0x00 0x00
+#define IMX94_PAD_CCM_CLKO3__NETC_1588MUX_INOUT10           0x0100 0x0404 0x0674 0x01 0x00
+#define IMX94_PAD_CCM_CLKO3__CAN3_TX                        0x0100 0x0404 0x0000 0x02 0x00
+#define IMX94_PAD_CCM_CLKO3__ECAT_LED_STATE_RUN             0x0100 0x0404 0x0000 0x03 0x00
+#define IMX94_PAD_CCM_CLKO3__TPM6_CH1                       0x0100 0x0404 0x0848 0x04 0x01
+#define IMX94_PAD_CCM_CLKO3__GPIO4_IO2                      0x0100 0x0404 0x0000 0x05 0x00
+#define IMX94_PAD_CCM_CLKO3__SINC3_EMCLK3                   0x0100 0x0404 0x0000 0x06 0x00
+#define IMX94_PAD_CCM_CLKO3__ENET_REF_CLK_ROOT              0x0100 0x0404 0x0000 0x07 0x00
+
+#define IMX94_PAD_CCM_CLKO4__CLKO_4                         0x0104 0x0408 0x0000 0x00 0x00
+#define IMX94_PAD_CCM_CLKO4__NETC_1588MUX_INOUT11           0x0104 0x0408 0x0000 0x01 0x00
+#define IMX94_PAD_CCM_CLKO4__CAN3_RX                        0x0104 0x0408 0x0680 0x02 0x01
+#define IMX94_PAD_CCM_CLKO4__ECAT_RESET_OUT                 0x0104 0x0408 0x0000 0x03 0x00
+#define IMX94_PAD_CCM_CLKO4__TPM5_CH3                       0x0104 0x0408 0x0844 0x04 0x01
+#define IMX94_PAD_CCM_CLKO4__GPIO4_IO3                      0x0104 0x0408 0x0000 0x05 0x00
+#define IMX94_PAD_CCM_CLKO4__SINC3_EMBIT3                   0x0104 0x0408 0x0000 0x06 0x00
+#define IMX94_PAD_CCM_CLKO4__XBAR1_XBAR_INOUT25             0x0104 0x0408 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH2_MDC_GPIO1__NETC_EMDC                 0x0108 0x040c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__NETC_ETH2_SLV_MDC         0x0108 0x040c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__I3C2_SCL                  0x0108 0x040c 0x0720 0x02 0x02
+#define IMX94_PAD_ETH2_MDC_GPIO1__USB1_OTG_ID               0x0108 0x040c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__FLEXIO2_FLEXIO0           0x0108 0x040c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__GPIO6_IO0                 0x0108 0x040c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__FLEXPWM2_PWMX0            0x0108 0x040c 0x06a0 0x06 0x01
+#define IMX94_PAD_ETH2_MDC_GPIO1__XBAR1_XBAR_INOUT30        0x0108 0x040c 0x08b0 0x07 0x01
+
+#define IMX94_PAD_ETH2_MDIO_GPIO2__NETC_EMDIO               0x010c 0x0410 0x0678 0x00 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__NETC_ETH2_SLV_MDIO       0x010c 0x0410 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__I3C2_SDA                 0x010c 0x0410 0x0724 0x02 0x02
+#define IMX94_PAD_ETH2_MDIO_GPIO2__USB1_OTG_PWR             0x010c 0x0410 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__FLEXIO2_FLEXIO1          0x010c 0x0410 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__GPIO6_IO1                0x010c 0x0410 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__FLEXPWM2_PWMX1           0x010c 0x0410 0x06a4 0x06 0x01
+#define IMX94_PAD_ETH2_MDIO_GPIO2__XBAR1_XBAR_INOUT31       0x010c 0x0410 0x08b4 0x07 0x01
+
+#define IMX94_PAD_ETH2_TXD3__NETC_PINMUX_ETH2_TXD3          0x0110 0x0414 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TXD3__LPUART3_DCD_B                  0x0110 0x0414 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_TXD3__CAN2_TX                        0x0110 0x0414 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TXD3__USB2_OTG_ID                    0x0110 0x0414 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_TXD3__FLEXIO2_FLEXIO2                0x0110 0x0414 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TXD3__GPIO6_IO2                      0x0110 0x0414 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TXD3__FLEXPWM2_PWMA0                 0x0110 0x0414 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TXD3__XBAR1_XBAR_INOUT32             0x0110 0x0414 0x08b8 0x07 0x01
+
+#define IMX94_PAD_ETH2_TXD2__NETC_PINMUX_ETH2_TXD2          0x0114 0x0418 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TXD2__ETH2_RMII_REF50_CLK            0x0114 0x0418 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_TXD2__CAN2_RX                        0x0114 0x0418 0x067c 0x02 0x03
+#define IMX94_PAD_ETH2_TXD2__USB2_OTG_OC                    0x0114 0x0418 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_TXD2__FLEXIO2_FLEXIO3                0x0114 0x0418 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TXD2__GPIO6_IO3                      0x0114 0x0418 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TXD2__FLEXPWM2_PWMB0                 0x0114 0x0418 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TXD2__XBAR1_XBAR_INOUT33             0x0114 0x0418 0x08bc 0x07 0x01
+
+#define IMX94_PAD_ETH2_TXD1__NETC_PINMUX_ETH2_TXD1          0x0118 0x041c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TXD1__LPUART3_RTS_B                  0x0118 0x041c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_TXD1__ECAT_CLK25                     0x0118 0x041c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TXD1__USB1_OTG_OC                    0x0118 0x041c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_TXD1__FLEXIO2_FLEXIO4                0x0118 0x041c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TXD1__GPIO6_IO4                      0x0118 0x041c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TXD1__FLEXPWM2_PWMA1                 0x0118 0x041c 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TXD1__XBAR1_XBAR_INOUT34             0x0118 0x041c 0x08c0 0x07 0x01
+
+#define IMX94_PAD_ETH2_TXD0__NETC_PINMUX_ETH2_TXD0          0x011c 0x0420 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TXD0__LPUART3_TX                     0x011c 0x0420 0x07a8 0x01 0x02
+#define IMX94_PAD_ETH2_TXD0__I3C2_PUR                       0x011c 0x0420 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TXD0__I3C2_PUR_B                     0x011c 0x0420 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_TXD0__FLEXIO2_FLEXIO5                0x011c 0x0420 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TXD0__GPIO6_IO5                      0x011c 0x0420 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TXD0__FLEXPWM2_PWMB1                 0x011c 0x0420 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TXD0__XBAR1_XBAR_INOUT35             0x011c 0x0420 0x08c4 0x07 0x01
+
+#define IMX94_PAD_ETH2_TX_CTL__NETC_PINMUX_ETH2_TX_CTL      0x0120 0x0424 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TX_CTL__LPUART3_DTR_B                0x0120 0x0424 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_TX_CTL__ECAT_LED_RUN                 0x0120 0x0424 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TX_CTL__FLEXIO2_FLEXIO6              0x0120 0x0424 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TX_CTL__GPIO6_IO6                    0x0120 0x0424 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TX_CTL__FLEXPWM2_PWMA2               0x0120 0x0424 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TX_CTL__XBAR1_XBAR_INOUT36           0x0120 0x0424 0x08c8 0x07 0x01
+
+#define IMX94_PAD_ETH2_TX_CLK__NETC_PINMUX_ETH2_TX_CLK      0x0124 0x0428 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TX_CLK__ECAT_LED_ERR                 0x0124 0x0428 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TX_CLK__FLEXIO2_FLEXIO7              0x0124 0x0428 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TX_CLK__GPIO6_IO7                    0x0124 0x0428 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TX_CLK__FLEXPWM2_PWMB2               0x0124 0x0428 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TX_CLK__XBAR1_XBAR_INOUT37           0x0124 0x0428 0x08cc 0x07 0x01
+
+#define IMX94_PAD_ETH2_RX_CTL__NETC_PINMUX_ETH2_RX_CTL      0x0128 0x042c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RX_CTL__LPUART3_DSR_B                0x0128 0x042c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_RX_CTL__ECAT_LED_STATE_RUN           0x0128 0x042c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_RX_CTL__USB2_OTG_PWR                 0x0128 0x042c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_RX_CTL__FLEXIO2_FLEXIO8              0x0128 0x042c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RX_CTL__GPIO6_IO8                    0x0128 0x042c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RX_CTL__FLEXPWM2_PWMA3               0x0128 0x042c 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_RX_CTL__SINC4_EMCLK0                 0x0128 0x042c 0x082c 0x07 0x01
+
+#define IMX94_PAD_ETH2_RX_CLK__NETC_PINMUX_ETH2_RX_CLK      0x012c 0x0430 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RX_CLK__LPUART3_RIN_B                0x012c 0x0430 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_RX_CLK__ECAT_RESET_OUT               0x012c 0x0430 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_RX_CLK__XBAR1_XBAR_INOUT38           0x012c 0x0430 0x08d0 0x03 0x01
+#define IMX94_PAD_ETH2_RX_CLK__FLEXIO2_FLEXIO9              0x012c 0x0430 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RX_CLK__GPIO6_IO9                    0x012c 0x0430 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RX_CLK__FLEXPWM2_PWMB3               0x012c 0x0430 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_RX_CLK__SINC4_EMBIT0                 0x012c 0x0430 0x0820 0x07 0x01
+
+#define IMX94_PAD_ETH2_RXD0__NETC_PINMUX_ETH2_RXD0          0x0130 0x0434 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RXD0__LPUART3_RX                     0x0130 0x0434 0x07a4 0x01 0x02
+#define IMX94_PAD_ETH2_RXD0__FLEXIO2_FLEXIO10               0x0130 0x0434 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RXD0__GPIO6_IO10                     0x0130 0x0434 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RXD0__DIG_ENCODER2_DATA_EN           0x0130 0x0434 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_RXD0__XBAR1_XBAR_INOUT39             0x0130 0x0434 0x08d4 0x07 0x01
+
+#define IMX94_PAD_ETH2_RXD1__NETC_PINMUX_ETH2_RXD1          0x0134 0x0438 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RXD1__LPUART3_CTS_B                  0x0134 0x0438 0x07a0 0x01 0x01
+#define IMX94_PAD_ETH2_RXD1__LPTMR2_ALT0                    0x0134 0x0438 0x0780 0x03 0x00
+#define IMX94_PAD_ETH2_RXD1__FLEXIO2_FLEXIO11               0x0134 0x0438 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RXD1__GPIO6_IO11                     0x0134 0x0438 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RXD1__DIG_ENCODER2_DATA_CLK          0x0134 0x0438 0x068c 0x06 0x00
+#define IMX94_PAD_ETH2_RXD1__XBAR1_XBAR_INOUT40             0x0134 0x0438 0x08d8 0x07 0x01
+
+#define IMX94_PAD_ETH2_RXD2__NETC_PINMUX_ETH2_RXD2          0x0138 0x043c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RXD2__LPTMR2_ALT1                    0x0138 0x043c 0x0784 0x03 0x00
+#define IMX94_PAD_ETH2_RXD2__FLEXIO2_FLEXIO12               0x0138 0x043c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RXD2__GPIO6_IO12                     0x0138 0x043c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RXD2__DIG_ENCODER2_DATA_OUT          0x0138 0x043c 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_RXD2__XBAR1_XBAR_INOUT41             0x0138 0x043c 0x08dc 0x07 0x01
+
+#define IMX94_PAD_ETH2_RXD3__NETC_PINMUX_ETH2_RXD3          0x013c 0x0440 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RXD3__LPTMR2_ALT2                    0x013c 0x0440 0x0788 0x03 0x00
+#define IMX94_PAD_ETH2_RXD3__FLEXIO2_FLEXIO13               0x013c 0x0440 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RXD3__GPIO6_IO13                     0x013c 0x0440 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RXD3__DIG_ENCODER2_DATA_IN           0x013c 0x0440 0x0690 0x06 0x00
+#define IMX94_PAD_ETH2_RXD3__XBAR1_XBAR_INOUT42             0x013c 0x0440 0x08e0 0x07 0x01
+
+#define IMX94_PAD_ETH3_MDC_GPIO1__NETC_EMDC                 0x0140 0x0444 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__LPUART4_DCD_B             0x0140 0x0444 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__NETC_ETH3_SLV_MDC         0x0140 0x0444 0x0000 0x02 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__SAI4_TX_SYNC              0x0140 0x0444 0x081c 0x03 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__FLEXIO2_FLEXIO14          0x0140 0x0444 0x0000 0x04 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__GPIO6_IO14                0x0140 0x0444 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__FLEXPWM1_PWMX0            0x0140 0x0444 0x0698 0x06 0x01
+#define IMX94_PAD_ETH3_MDC_GPIO1__SINC4_MOD_CLK0            0x0140 0x0444 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH3_MDIO_GPIO2__NETC_EMDIO               0x0144 0x0448 0x0678 0x00 0x01
+#define IMX94_PAD_ETH3_MDIO_GPIO2__LPUART4_RIN_B            0x0144 0x0448 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__NETC_ETH3_SLV_MDIO       0x0144 0x0448 0x0000 0x02 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__SAI4_TX_BCLK             0x0144 0x0448 0x0818 0x03 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__FLEXIO2_FLEXIO15         0x0144 0x0448 0x0000 0x04 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__GPIO6_IO15               0x0144 0x0448 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__FLEXPWM1_PWMX1           0x0144 0x0448 0x069c 0x06 0x01
+#define IMX94_PAD_ETH3_MDIO_GPIO2__SINC4_MOD_CLK1           0x0144 0x0448 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH3_TXD3__NETC_PINMUX_ETH3_TXD3          0x0148 0x044c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TXD3__XSPI_SLV_DATA7                 0x0148 0x044c 0x0924 0x02 0x00
+#define IMX94_PAD_ETH3_TXD3__SAI4_TX_DATA0                  0x0148 0x044c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH3_TXD3__LPUART3_TX                     0x0148 0x044c 0x07a8 0x04 0x03
+#define IMX94_PAD_ETH3_TXD3__GPIO6_IO16                     0x0148 0x044c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TXD3__FLEXPWM1_PWMA0                 0x0148 0x044c 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TXD2__NETC_PINMUX_ETH3_TXD2          0x014c 0x0450 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TXD2__ETH3_RMII_REF50_CLK            0x014c 0x0450 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_TXD2__XSPI_SLV_DATA6                 0x014c 0x0450 0x0920 0x02 0x00
+#define IMX94_PAD_ETH3_TXD2__SAI4_RX_SYNC                   0x014c 0x0450 0x0814 0x03 0x00
+#define IMX94_PAD_ETH3_TXD2__GPIO6_IO17                     0x014c 0x0450 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TXD2__FLEXPWM1_PWMB0                 0x014c 0x0450 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TXD1__NETC_PINMUX_ETH3_TXD1          0x0150 0x0454 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TXD1__LPUART4_RTS_B                  0x0150 0x0454 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_TXD1__XSPI_SLV_DATA5                 0x0150 0x0454 0x091c 0x02 0x00
+#define IMX94_PAD_ETH3_TXD1__SAI4_RX_BCLK                   0x0150 0x0454 0x080c 0x03 0x00
+#define IMX94_PAD_ETH3_TXD1__GPIO6_IO18                     0x0150 0x0454 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TXD1__FLEXPWM1_PWMA1                 0x0150 0x0454 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TXD0__NETC_PINMUX_ETH3_TXD0          0x0154 0x0458 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TXD0__LPUART4_TX                     0x0154 0x0458 0x07b4 0x01 0x02
+#define IMX94_PAD_ETH3_TXD0__XSPI_SLV_DATA4                 0x0154 0x0458 0x0918 0x02 0x00
+#define IMX94_PAD_ETH3_TXD0__SAI4_RX_DATA0                  0x0154 0x0458 0x0810 0x03 0x00
+#define IMX94_PAD_ETH3_TXD0__GPIO6_IO19                     0x0154 0x0458 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TXD0__FLEXPWM1_PWMB1                 0x0154 0x0458 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TX_CTL__NETC_PINMUX_ETH3_TX_CTL      0x0158 0x045c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TX_CTL__LPUART4_DTR_B                0x0158 0x045c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_TX_CTL__XSPI_SLV_DQS                 0x0158 0x045c 0x0900 0x02 0x00
+#define IMX94_PAD_ETH3_TX_CTL__SAI4_MCLK                    0x0158 0x045c 0x0808 0x03 0x00
+#define IMX94_PAD_ETH3_TX_CTL__LPUART3_RX                   0x0158 0x045c 0x07a4 0x04 0x03
+#define IMX94_PAD_ETH3_TX_CTL__GPIO6_IO20                   0x0158 0x045c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TX_CTL__FLEXPWM1_PWMA2               0x0158 0x045c 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TX_CLK__NETC_PINMUX_ETH3_TX_CLK      0x015c 0x0460 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TX_CLK__XSPI_SLV_CLK                 0x015c 0x0460 0x0904 0x02 0x00
+#define IMX94_PAD_ETH3_TX_CLK__SAI2_TX_SYNC                 0x015c 0x0460 0x07fc 0x03 0x01
+#define IMX94_PAD_ETH3_TX_CLK__LPUART3_CTS_B                0x015c 0x0460 0x07a0 0x04 0x02
+#define IMX94_PAD_ETH3_TX_CLK__GPIO6_IO21                   0x015c 0x0460 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TX_CLK__FLEXPWM1_PWMB2               0x015c 0x0460 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_RX_CTL__NETC_PINMUX_ETH3_RX_CTL      0x0160 0x0464 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RX_CTL__LPUART4_DSR_B                0x0160 0x0464 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_RX_CTL__XSPI_SLV_CS                  0x0160 0x0464 0x08fc 0x02 0x00
+#define IMX94_PAD_ETH3_RX_CTL__SAI2_TX_BCLK                 0x0160 0x0464 0x07f8 0x03 0x01
+#define IMX94_PAD_ETH3_RX_CTL__XBAR1_XBAR_INOUT43           0x0160 0x0464 0x08e4 0x04 0x01
+#define IMX94_PAD_ETH3_RX_CTL__GPIO6_IO22                   0x0160 0x0464 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RX_CTL__FLEXPWM1_PWMA3               0x0160 0x0464 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RX_CTL__SINC4_EMCLK1                 0x0160 0x0464 0x0830 0x07 0x01
+
+#define IMX94_PAD_ETH3_RX_CLK__NETC_PINMUX_ETH3_RX_CLK      0x0164 0x0468 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RX_CLK__LPUART4_CTS_B                0x0164 0x0468 0x07ac 0x01 0x01
+#define IMX94_PAD_ETH3_RX_CLK__XSPI_SLV_DATA3               0x0164 0x0468 0x0914 0x02 0x00
+#define IMX94_PAD_ETH3_RX_CLK__SAI2_TX_DATA0                0x0164 0x0468 0x0000 0x03 0x00
+#define IMX94_PAD_ETH3_RX_CLK__XBAR1_XBAR_INOUT44           0x0164 0x0468 0x08e8 0x04 0x01
+#define IMX94_PAD_ETH3_RX_CLK__GPIO6_IO23                   0x0164 0x0468 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RX_CLK__FLEXPWM1_PWMB3               0x0164 0x0468 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RX_CLK__SINC4_EMBIT1                 0x0164 0x0468 0x0824 0x07 0x01
+
+#define IMX94_PAD_ETH3_RXD0__NETC_PINMUX_ETH3_RXD0          0x0168 0x046c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RXD0__LPUART4_RX                     0x0168 0x046c 0x07b0 0x01 0x02
+#define IMX94_PAD_ETH3_RXD0__XSPI_SLV_DATA2                 0x0168 0x046c 0x0910 0x02 0x00
+#define IMX94_PAD_ETH3_RXD0__SAI2_RX_SYNC                   0x0168 0x046c 0x07f4 0x03 0x01
+#define IMX94_PAD_ETH3_RXD0__GPIO6_IO24                     0x0168 0x046c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RXD0__DIG_ENCODER1_DATA_EN           0x0168 0x046c 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RXD0__XBAR1_XBAR_INOUT45             0x0168 0x046c 0x08ec 0x07 0x01
+
+#define IMX94_PAD_ETH3_RXD1__NETC_PINMUX_ETH3_RXD1          0x016c 0x0470 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RXD1__XSPI_SLV_DATA1                 0x016c 0x0470 0x090c 0x02 0x00
+#define IMX94_PAD_ETH3_RXD1__SAI2_RX_BCLK                   0x016c 0x0470 0x07ec 0x03 0x01
+#define IMX94_PAD_ETH3_RXD1__LPUART3_RTS_B                  0x016c 0x0470 0x0000 0x04 0x00
+#define IMX94_PAD_ETH3_RXD1__GPIO6_IO25                     0x016c 0x0470 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RXD1__DIG_ENCODER1_DATA_CLK          0x016c 0x0470 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RXD1__XBAR1_XBAR_INOUT46             0x016c 0x0470 0x08f0 0x07 0x01
+
+#define IMX94_PAD_ETH3_RXD2__NETC_PINMUX_ETH3_RXD2          0x0170 0x0474 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RXD2__MQS2_RIGHT                     0x0170 0x0474 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_RXD2__XSPI_SLV_DATA0                 0x0170 0x0474 0x0908 0x02 0x00
+#define IMX94_PAD_ETH3_RXD2__SAI2_RX_DATA0                  0x0170 0x0474 0x07f0 0x03 0x01
+#define IMX94_PAD_ETH3_RXD2__GPIO6_IO26                     0x0170 0x0474 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RXD2__DIG_ENCODER1_DATA_OUT          0x0170 0x0474 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RXD2__XBAR1_XBAR_INOUT47             0x0170 0x0474 0x08f4 0x07 0x01
+
+#define IMX94_PAD_ETH3_RXD3__NETC_PINMUX_ETH3_RXD3          0x0174 0x0478 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RXD3__MQS2_LEFT                      0x0174 0x0478 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_RXD3__SAI2_MCLK                      0x0174 0x0478 0x07e8 0x03 0x01
+#define IMX94_PAD_ETH3_RXD3__GPIO6_IO27                     0x0174 0x0478 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RXD3__DIG_ENCODER1_DATA_IN           0x0174 0x0478 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RXD3__XBAR1_XBAR_INOUT48             0x0174 0x0478 0x08f8 0x07 0x01
+
+#define IMX94_PAD_ETH4_MDC_GPIO1__NETC_EMDC                 0x0178 0x047c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__ECAT_MDC                  0x0178 0x047c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__ECAT_CLK25                0x0178 0x047c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__NETC_ETH4_SLV_MDC         0x0178 0x047c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__FLEXIO1_3_2_FLEXIO12      0x0178 0x047c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__GPIO6_IO28                0x0178 0x047c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__FLEXPWM4_PWMX0            0x0178 0x047c 0x06f4 0x06 0x02
+#define IMX94_PAD_ETH4_MDC_GPIO1__SINC4_MOD_CLK2            0x0178 0x047c 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH4_MDIO_GPIO2__NETC_EMDIO               0x017c 0x0480 0x0678 0x00 0x02
+#define IMX94_PAD_ETH4_MDIO_GPIO2__ECAT_MDIO                0x017c 0x0480 0x0628 0x01 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__ENET_REF_CLK_ROOT        0x017c 0x0480 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__NETC_ETH4_SLV_MDIO       0x017c 0x0480 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__FLEXIO1_3_2_FLEXIO13     0x017c 0x0480 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__GPIO6_IO29               0x017c 0x0480 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__FLEXPWM4_PWMX1           0x017c 0x0480 0x06f8 0x06 0x02
+#define IMX94_PAD_ETH4_MDIO_GPIO2__SINC_FILTER_GLUE4_BREAK  0x017c 0x0480 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH4_TX_CLK__NETC_PINMUX_ETH4_TX_CLK      0x0180 0x0484 0x0648 0x00 0x00
+#define IMX94_PAD_ETH4_TX_CLK__USDHC3_CLK                   0x0180 0x0484 0x0000 0x01 0x00
+#define IMX94_PAD_ETH4_TX_CLK__XSPI2_A_SCLK                 0x0180 0x0484 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TX_CLK__ECAT_LED_ERR                 0x0180 0x0484 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TX_CLK__FLEXIO1_3_2_FLEXIO0          0x0180 0x0484 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TX_CLK__GPIO6_IO30                   0x0180 0x0484 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TX_CLK__FLEXPWM4_PWMA0               0x0180 0x0484 0x06d4 0x06 0x01
+#define IMX94_PAD_ETH4_TX_CLK__XBAR1_XBAR_INOUT30           0x0180 0x0484 0x08b0 0x07 0x02
+
+#define IMX94_PAD_ETH4_TX_CTL__NETC_PINMUX_ETH4_TX_CTL      0x0184 0x0488 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TX_CTL__USDHC3_CMD                   0x0184 0x0488 0x0858 0x01 0x01
+#define IMX94_PAD_ETH4_TX_CTL__XSPI2_A_SS0_B                0x0184 0x0488 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TX_CTL__ECAT_RESET_OUT               0x0184 0x0488 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TX_CTL__FLEXIO1_3_2_FLEXIO1          0x0184 0x0488 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TX_CTL__GPIO6_IO31                   0x0184 0x0488 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TX_CTL__FLEXPWM4_PWMB0               0x0184 0x0488 0x06e4 0x06 0x01
+#define IMX94_PAD_ETH4_TX_CTL__XBAR1_XBAR_INOUT31           0x0184 0x0488 0x08b4 0x07 0x02
+
+#define IMX94_PAD_ETH4_TXD0__NETC_PINMUX_ETH4_TXD0          0x0188 0x048c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TXD0__USDHC3_DATA0                   0x0188 0x048c 0x085c 0x01 0x01
+#define IMX94_PAD_ETH4_TXD0__XSPI2_A_DATA0                  0x0188 0x048c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TXD0__ECAT_LED_RUN                   0x0188 0x048c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TXD0__FLEXIO1_3_2_FLEXIO2            0x0188 0x048c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TXD0__GPIO7_IO0                      0x0188 0x048c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TXD0__FLEXPWM4_PWMA1                 0x0188 0x048c 0x06d8 0x06 0x01
+#define IMX94_PAD_ETH4_TXD0__XBAR1_XBAR_INOUT32             0x0188 0x048c 0x08b8 0x07 0x02
+
+#define IMX94_PAD_ETH4_TXD1__NETC_PINMUX_ETH4_TXD1          0x018c 0x0490 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TXD1__USDHC3_DATA1                   0x018c 0x0490 0x0860 0x01 0x01
+#define IMX94_PAD_ETH4_TXD1__XSPI2_A_DATA1                  0x018c 0x0490 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TXD1__ECAT_LED_STATE_RUN             0x018c 0x0490 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TXD1__FLEXIO1_3_2_FLEXIO3            0x018c 0x0490 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TXD1__GPIO7_IO1                      0x018c 0x0490 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TXD1__FLEXPWM4_PWMB1                 0x018c 0x0490 0x06e8 0x06 0x01
+#define IMX94_PAD_ETH4_TXD1__XBAR1_XBAR_INOUT33             0x018c 0x0490 0x08bc 0x07 0x02
+
+#define IMX94_PAD_ETH4_TXD2__NETC_PINMUX_ETH4_TXD2          0x0190 0x0494 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TXD2__USDHC3_DATA2                   0x0190 0x0494 0x0864 0x01 0x01
+#define IMX94_PAD_ETH4_TXD2__XSPI2_A_DATA2                  0x0190 0x0494 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TXD2__ECAT_CLK25                     0x0190 0x0494 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TXD2__FLEXIO1_3_2_FLEXIO4            0x0190 0x0494 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TXD2__GPIO7_IO2                      0x0190 0x0494 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TXD2__FLEXPWM4_PWMA2                 0x0190 0x0494 0x06dc 0x06 0x01
+#define IMX94_PAD_ETH4_TXD2__ETH4_RMII_REF50_CLK            0x0190 0x0494 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH4_TXD3__NETC_PINMUX_ETH4_TXD3          0x0194 0x0498 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TXD3__USDHC3_DATA3                   0x0194 0x0498 0x0868 0x01 0x01
+#define IMX94_PAD_ETH4_TXD3__XSPI2_A_DATA3                  0x0194 0x0498 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TXD3__FLEXIO1_3_2_FLEXIO5            0x0194 0x0498 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TXD3__GPIO7_IO3                      0x0194 0x0498 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TXD3__FLEXPWM4_PWMB2                 0x0194 0x0498 0x06ec 0x06 0x01
+#define IMX94_PAD_ETH4_TXD3__XBAR1_XBAR_INOUT35             0x0194 0x0498 0x08c4 0x07 0x02
+
+#define IMX94_PAD_ETH4_RXD0__NETC_PINMUX_ETH4_RXD0          0x0198 0x049c 0x0638 0x00 0x00
+#define IMX94_PAD_ETH4_RXD0__XSPI2_A_DATA4                  0x0198 0x049c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RXD0__FLEXIO1_3_2_FLEXIO6            0x0198 0x049c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RXD0__GPIO7_IO4                      0x0198 0x049c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RXD0__FLEXPWM4_PWMA3                 0x0198 0x049c 0x06e0 0x06 0x01
+#define IMX94_PAD_ETH4_RXD0__SINC4_EMCLK2                   0x0198 0x049c 0x0834 0x07 0x01
+
+#define IMX94_PAD_ETH4_RXD1__NETC_PINMUX_ETH4_RXD1          0x019c 0x04a0 0x063c 0x00 0x00
+#define IMX94_PAD_ETH4_RXD1__XSPI2_A_DATA5                  0x019c 0x04a0 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RXD1__FLEXIO2_4_1_FLEXIO11           0x019c 0x04a0 0x0694 0x03 0x00
+#define IMX94_PAD_ETH4_RXD1__FLEXIO1_3_2_FLEXIO7            0x019c 0x04a0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RXD1__GPIO7_IO5                      0x019c 0x04a0 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RXD1__FLEXPWM4_PWMB3                 0x019c 0x04a0 0x06f0 0x06 0x01
+#define IMX94_PAD_ETH4_RXD1__SINC4_EMBIT2                   0x019c 0x04a0 0x0828 0x07 0x01
+
+#define IMX94_PAD_ETH4_RXD2__NETC_PINMUX_ETH4_RXD2          0x01a0 0x04a4 0x0640 0x00 0x00
+#define IMX94_PAD_ETH4_RXD2__XSPI2_A_DATA6                  0x01a0 0x04a4 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RXD2__FLEXIO2_4_1_FLEXIO12           0x01a0 0x04a4 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_RXD2__FLEXIO1_3_2_FLEXIO8            0x01a0 0x04a4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RXD2__GPIO7_IO6                      0x01a0 0x04a4 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RXD2__DIG_ENCODER2_DATA_EN           0x01a0 0x04a4 0x0000 0x06 0x00
+#define IMX94_PAD_ETH4_RXD2__XBAR1_XBAR_INOUT4              0x01a0 0x04a4 0x086c 0x07 0x01
+
+#define IMX94_PAD_ETH4_RXD3__NETC_PINMUX_ETH4_RXD3          0x01a4 0x04a8 0x0644 0x00 0x00
+#define IMX94_PAD_ETH4_RXD3__ENET_REF_CLK_ROOT              0x01a4 0x04a8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH4_RXD3__XSPI2_A_DATA7                  0x01a4 0x04a8 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RXD3__FLEXIO2_4_1_FLEXIO13           0x01a4 0x04a8 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_RXD3__FLEXIO1_3_2_FLEXIO9            0x01a4 0x04a8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RXD3__GPIO7_IO7                      0x01a4 0x04a8 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RXD3__DIG_ENCODER2_DATA_CLK          0x01a4 0x04a8 0x068c 0x06 0x01
+#define IMX94_PAD_ETH4_RXD3__XBAR1_XBAR_INOUT5              0x01a4 0x04a8 0x0870 0x07 0x01
+
+#define IMX94_PAD_ETH4_RX_CTL__NETC_PINMUX_ETH4_RX_CTL      0x01a8 0x04ac 0x0634 0x00 0x00
+#define IMX94_PAD_ETH4_RX_CTL__XSPI2_A_SS1_B                0x01a8 0x04ac 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RX_CTL__FLEXIO2_4_1_FLEXIO14         0x01a8 0x04ac 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_RX_CTL__FLEXIO1_3_2_FLEXIO10         0x01a8 0x04ac 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RX_CTL__GPIO7_IO8                    0x01a8 0x04ac 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RX_CTL__DIG_ENCODER2_DATA_OUT        0x01a8 0x04ac 0x0000 0x06 0x00
+#define IMX94_PAD_ETH4_RX_CTL__XBAR1_XBAR_INOUT6            0x01a8 0x04ac 0x0874 0x07 0x01
+
+#define IMX94_PAD_ETH4_RX_CLK__NETC_PINMUX_ETH4_RX_CLK      0x01ac 0x04b0 0x0630 0x00 0x00
+#define IMX94_PAD_ETH4_RX_CLK__XSPI2_A_DQS                  0x01ac 0x04b0 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RX_CLK__FLEXIO2_4_1_FLEXIO15         0x01ac 0x04b0 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_RX_CLK__FLEXIO1_3_2_FLEXIO11         0x01ac 0x04b0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RX_CLK__GPIO7_IO9                    0x01ac 0x04b0 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RX_CLK__DIG_ENCODER2_DATA_IN         0x01ac 0x04b0 0x0690 0x06 0x01
+#define IMX94_PAD_ETH4_RX_CLK__XBAR1_XBAR_INOUT7            0x01ac 0x04b0 0x0878 0x07 0x01
+
+#define IMX94_PAD_ETH0_TXD0__NETC_PINMUX_ETH0_TXD0          0x01b0 0x04b4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TXD0__ECAT_PT0_TXD0                  0x01b0 0x04b4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TXD0__FLEXIO4_FLEXIO0                0x01b0 0x04b4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TXD0__GPIO5_IO0                      0x01b0 0x04b4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TXD1__NETC_PINMUX_ETH0_TXD1          0x01b4 0x04b8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TXD1__ECAT_PT0_TXD1                  0x01b4 0x04b8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TXD1__FLEXIO4_FLEXIO1                0x01b4 0x04b8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TXD1__GPIO5_IO1                      0x01b4 0x04b8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TX_EN__NETC_PINMUX_ETH0_TX_EN        0x01b8 0x04bc 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TX_EN__ECAT_PT0_TX_EN                0x01b8 0x04bc 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TX_EN__FLEXIO4_FLEXIO2               0x01b8 0x04bc 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TX_EN__GPIO5_IO2                     0x01b8 0x04bc 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TX_CLK__NETC_PINMUX_ETH0_TX_CLK      0x01bc 0x04c0 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TX_CLK__ECAT_PT0_TX_CLK              0x01bc 0x04c0 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TX_CLK__FLEXIO4_FLEXIO3              0x01bc 0x04c0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TX_CLK__GPIO5_IO3                    0x01bc 0x04c0 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RXD0__NETC_PINMUX_ETH0_RXD0          0x01c0 0x04c4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RXD0__ECAT_PT0_RXD0                  0x01c0 0x04c4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RXD0__FLEXIO4_FLEXIO4                0x01c0 0x04c4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RXD0__GPIO5_IO4                      0x01c0 0x04c4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RXD1__NETC_PINMUX_ETH0_RXD1          0x01c4 0x04c8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RXD1__ECAT_PT0_RXD1                  0x01c4 0x04c8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RXD1__FLEXIO4_FLEXIO5                0x01c4 0x04c8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RXD1__GPIO5_IO5                      0x01c4 0x04c8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RX_DV__NETC_PINMUX_ETH0_RX_DV        0x01c8 0x04cc 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RX_DV__ECAT_PT0_RX_DV                0x01c8 0x04cc 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RX_DV__FLEXIO4_FLEXIO6               0x01c8 0x04cc 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RX_DV__GPIO5_IO6                     0x01c8 0x04cc 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TXD2__NETC_PINMUX_ETH0_TXD2          0x01cc 0x04d0 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TXD2__ECAT_PT0_TXD2                  0x01cc 0x04d0 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TXD2__ETH0_RMII_REF50_CLK            0x01cc 0x04d0 0x0000 0x02 0x00
+#define IMX94_PAD_ETH0_TXD2__FLEXIO4_FLEXIO7                0x01cc 0x04d0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TXD2__GPIO5_IO7                      0x01cc 0x04d0 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TXD3__NETC_PINMUX_ETH0_TXD3          0x01d0 0x04d4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TXD3__ECAT_PT0_TXD3                  0x01d0 0x04d4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TXD3__FLEXIO4_FLEXIO8                0x01d0 0x04d4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TXD3__GPIO5_IO8                      0x01d0 0x04d4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RXD2__NETC_PINMUX_ETH0_RXD2          0x01d4 0x04d8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RXD2__ECAT_PT0_RXD2                  0x01d4 0x04d8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RXD2__FLEXIO4_FLEXIO9                0x01d4 0x04d8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RXD2__GPIO5_IO9                      0x01d4 0x04d8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RXD3__NETC_PINMUX_ETH0_RXD3          0x01d8 0x04dc 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RXD3__ECAT_PT0_RXD3                  0x01d8 0x04dc 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RXD3__FLEXIO4_FLEXIO10               0x01d8 0x04dc 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RXD3__GPIO5_IO10                     0x01d8 0x04dc 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RX_CLK__NETC_PINMUX_ETH0_RX_CLK      0x01dc 0x04e0 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RX_CLK__ECAT_PT0_RX_CLK              0x01dc 0x04e0 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RX_CLK__FLEXIO4_FLEXIO11             0x01dc 0x04e0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RX_CLK__GPIO5_IO11                   0x01dc 0x04e0 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RX_ER__NETC_PINMUX_ETH0_RX_ER        0x01e0 0x04e4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RX_ER__ECAT_PT0_RX_ER                0x01e0 0x04e4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RX_ER__FLEXIO4_FLEXIO12              0x01e0 0x04e4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RX_ER__GPIO5_IO12                    0x01e0 0x04e4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TX_ER__NETC_PINMUX_ETH0_TX_ER        0x01e4 0x04e8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TX_ER__ECAT_LINK_ACT0                0x01e4 0x04e8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TX_ER__FLEXIO4_FLEXIO13              0x01e4 0x04e8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TX_ER__GPIO5_IO13                    0x01e4 0x04e8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_CRS__NETC_PINMUX_ETH0_CRS            0x01e8 0x04ec 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_CRS__ECAT_LINK0                      0x01e8 0x04ec 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_CRS__NETC_EMDC                       0x01e8 0x04ec 0x0000 0x02 0x00
+#define IMX94_PAD_ETH0_CRS__FLEXIO4_FLEXIO14                0x01e8 0x04ec 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_CRS__GPIO5_IO14                      0x01e8 0x04ec 0x0000 0x05 0x00
+#define IMX94_PAD_ETH0_CRS__XBAR1_XBAR_INOUT8               0x01e8 0x04ec 0x087c 0x06 0x02
+#define IMX94_PAD_ETH0_CRS__SINC_FILTER_GLUE2_BREAK         0x01e8 0x04ec 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH0_COL__NETC_PINMUX_ETH0_COL            0x01ec 0x04f0 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_COL__ECAT_LINK1                      0x01ec 0x04f0 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_COL__NETC_EMDIO                      0x01ec 0x04f0 0x0678 0x02 0x03
+#define IMX94_PAD_ETH0_COL__FLEXIO4_FLEXIO15                0x01ec 0x04f0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_COL__GPIO5_IO15                      0x01ec 0x04f0 0x0000 0x05 0x00
+#define IMX94_PAD_ETH0_COL__XBAR1_XBAR_INOUT9               0x01ec 0x04f0 0x0880 0x06 0x02
+#define IMX94_PAD_ETH0_COL__SINC_FILTER_GLUE1_BREAK         0x01ec 0x04f0 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH1_TXD0__NETC_PINMUX_ETH1_TXD0          0x01f0 0x04f4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TXD0__ECAT_PT1_TXD0                  0x01f0 0x04f4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TXD0__ENCODER_DIAG0                  0x01f0 0x04f4 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TXD0__FLEXIO3_FLEXIO0                0x01f0 0x04f4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TXD0__GPIO5_IO16                     0x01f0 0x04f4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TXD1__NETC_PINMUX_ETH1_TXD1          0x01f4 0x04f8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TXD1__ECAT_PT1_TXD1                  0x01f4 0x04f8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TXD1__ENCODER_DIAG1                  0x01f4 0x04f8 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TXD1__FLEXIO3_FLEXIO1                0x01f4 0x04f8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TXD1__GPIO5_IO17                     0x01f4 0x04f8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TX_EN__NETC_PINMUX_ETH1_TX_EN        0x01f8 0x04fc 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TX_EN__ECAT_PT1_TX_EN                0x01f8 0x04fc 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TX_EN__ENCODER_DIAG2                 0x01f8 0x04fc 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TX_EN__FLEXIO3_FLEXIO2               0x01f8 0x04fc 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TX_EN__GPIO5_IO18                    0x01f8 0x04fc 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TX_CLK__NETC_PINMUX_ETH1_TX_CLK      0x01fc 0x0500 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TX_CLK__ECAT_PT1_TX_CLK              0x01fc 0x0500 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TX_CLK__ENCODER_DIAG3                0x01fc 0x0500 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TX_CLK__FLEXIO3_FLEXIO3              0x01fc 0x0500 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TX_CLK__GPIO5_IO19                   0x01fc 0x0500 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RXD0__NETC_PINMUX_ETH1_RXD0          0x0200 0x0504 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RXD0__ECAT_PT1_RXD0                  0x0200 0x0504 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RXD0__ENCODER_DIAG4                  0x0200 0x0504 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RXD0__FLEXIO3_FLEXIO4                0x0200 0x0504 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RXD0__GPIO5_IO20                     0x0200 0x0504 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RXD1__NETC_PINMUX_ETH1_RXD1          0x0204 0x0508 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RXD1__ECAT_PT1_RXD1                  0x0204 0x0508 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RXD1__ENCODER_DIAG5                  0x0204 0x0508 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RXD1__FLEXIO3_FLEXIO5                0x0204 0x0508 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RXD1__GPIO5_IO21                     0x0204 0x0508 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RX_DV__NETC_PINMUX_ETH1_RX_DV        0x0208 0x050c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RX_DV__ECAT_PT1_RX_DV                0x0208 0x050c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RX_DV__ENCODER_DIAG6                 0x0208 0x050c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RX_DV__FLEXIO3_FLEXIO6               0x0208 0x050c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RX_DV__GPIO5_IO22                    0x0208 0x050c 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TXD2__NETC_PINMUX_ETH1_TXD2          0x020c 0x0510 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TXD2__ECAT_PT1_TXD2                  0x020c 0x0510 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TXD2__ETH1_RMII_REF50_CLK            0x020c 0x0510 0x0000 0x02 0x00
+#define IMX94_PAD_ETH1_TXD2__ENCODER_DIAG7                  0x020c 0x0510 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TXD2__FLEXIO3_FLEXIO7                0x020c 0x0510 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TXD2__GPIO5_IO23                     0x020c 0x0510 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TXD3__NETC_PINMUX_ETH1_TXD3          0x0210 0x0514 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TXD3__ECAT_PT1_TXD3                  0x0210 0x0514 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TXD3__ENCODER_DIAG8                  0x0210 0x0514 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TXD3__FLEXIO3_FLEXIO8                0x0210 0x0514 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TXD3__GPIO5_IO24                     0x0210 0x0514 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RXD2__NETC_PINMUX_ETH1_RXD2          0x0214 0x0518 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RXD2__ECAT_PT1_RXD2                  0x0214 0x0518 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RXD2__ENCODER_DIAG9                  0x0214 0x0518 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RXD2__FLEXIO3_FLEXIO9                0x0214 0x0518 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RXD2__GPIO5_IO25                     0x0214 0x0518 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RXD3__NETC_PINMUX_ETH1_RXD3          0x0218 0x051c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RXD3__ECAT_PT1_RXD3                  0x0218 0x051c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RXD3__ENCODER_DIAG10                 0x0218 0x051c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RXD3__FLEXIO3_FLEXIO10               0x0218 0x051c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RXD3__GPIO5_IO26                     0x0218 0x051c 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RX_CLK__NETC_PINMUX_ETH1_RX_CLK      0x021c 0x0520 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RX_CLK__ECAT_PT1_RX_CLK              0x021c 0x0520 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RX_CLK__ENCODER_DIAG11               0x021c 0x0520 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RX_CLK__FLEXIO3_FLEXIO11             0x021c 0x0520 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RX_CLK__GPIO5_IO27                   0x021c 0x0520 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RX_ER__NETC_PINMUX_ETH1_RX_ER        0x0220 0x0524 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RX_ER__ECAT_PT1_RX_ER                0x0220 0x0524 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RX_ER__ENCODER_DIAG12                0x0220 0x0524 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RX_ER__FLEXIO3_FLEXIO12              0x0220 0x0524 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RX_ER__GPIO5_IO28                    0x0220 0x0524 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TX_ER__NETC_PINMUX_ETH1_TX_ER        0x0224 0x0528 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TX_ER__ECAT_LINK_ACT1                0x0224 0x0528 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TX_ER__ENCODER_DIAG13                0x0224 0x0528 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TX_ER__FLEXIO3_FLEXIO13              0x0224 0x0528 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TX_ER__GPIO5_IO29                    0x0224 0x0528 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_CRS__NETC_PINMUX_ETH1_CRS            0x0228 0x052c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_CRS__ECAT_MDC                        0x0228 0x052c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_CRS__NETC_EMDC                       0x0228 0x052c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH1_CRS__ENCODER_DIAG14                  0x0228 0x052c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_CRS__FLEXIO3_FLEXIO14                0x0228 0x052c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_CRS__GPIO5_IO30                      0x0228 0x052c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH1_CRS__XBAR1_XBAR_INOUT10              0x0228 0x052c 0x0884 0x06 0x02
+#define IMX94_PAD_ETH1_CRS__SINC_FILTER_GLUE1_BREAK         0x0228 0x052c 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH1_COL__NETC_PINMUX_ETH1_COL            0x022c 0x0530 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_COL__ECAT_MDIO                       0x022c 0x0530 0x0628 0x01 0x01
+#define IMX94_PAD_ETH1_COL__NETC_EMDIO                      0x022c 0x0530 0x0678 0x02 0x04
+#define IMX94_PAD_ETH1_COL__ENCODER_DIAG15                  0x022c 0x0530 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_COL__FLEXIO3_FLEXIO15                0x022c 0x0530 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_COL__GPIO5_IO31                      0x022c 0x0530 0x0000 0x05 0x00
+#define IMX94_PAD_ETH1_COL__XBAR1_XBAR_INOUT11              0x022c 0x0530 0x0888 0x06 0x02
+#define IMX94_PAD_ETH1_COL__SINC_FILTER_GLUE2_BREAK         0x022c 0x0530 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_CLK__USDHC1_CLK                       0x0230 0x0534 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_CLK__SAI4_TX_BCLK                     0x0230 0x0534 0x0818 0x01 0x01
+#define IMX94_PAD_SD1_CLK__CAN4_TX                          0x0230 0x0534 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_CLK__NETC_1588MUX_INOUT0              0x0230 0x0534 0x064c 0x03 0x01
+#define IMX94_PAD_SD1_CLK__FLEXIO2_4_1_FLEXIO0              0x0230 0x0534 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_CLK__GPIO4_IO8                        0x0230 0x0534 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_CLK__FLEXPWM3_PWMX0                   0x0230 0x0534 0x06c8 0x06 0x02
+#define IMX94_PAD_SD1_CLK__SINC1_EMCLK0                     0x0230 0x0534 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_CMD__USDHC1_CMD                       0x0234 0x0538 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_CMD__SAI4_RX_BCLK                     0x0234 0x0538 0x080c 0x01 0x01
+#define IMX94_PAD_SD1_CMD__CAN4_RX                          0x0234 0x0538 0x0684 0x02 0x02
+#define IMX94_PAD_SD1_CMD__NETC_1588MUX_INOUT1              0x0234 0x0538 0x0650 0x03 0x01
+#define IMX94_PAD_SD1_CMD__FLEXIO2_4_1_FLEXIO1              0x0234 0x0538 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_CMD__GPIO4_IO9                        0x0234 0x0538 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_CMD__FLEXPWM3_PWMX1                   0x0234 0x0538 0x06cc 0x06 0x02
+#define IMX94_PAD_SD1_CMD__SINC1_EMBIT0                     0x0234 0x0538 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA0__USDHC1_DATA0                   0x0238 0x053c 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA0__SAI4_RX_SYNC                   0x0238 0x053c 0x0814 0x01 0x01
+#define IMX94_PAD_SD1_DATA0__CAN5_TX                        0x0238 0x053c 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA0__NETC_1588MUX_INOUT2            0x0238 0x053c 0x0654 0x03 0x01
+#define IMX94_PAD_SD1_DATA0__FLEXIO2_4_1_FLEXIO2            0x0238 0x053c 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA0__GPIO4_IO10                     0x0238 0x053c 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA0__FLEXPWM3_PWMX2                 0x0238 0x053c 0x06d0 0x06 0x01
+#define IMX94_PAD_SD1_DATA0__SINC1_EMCLK1                   0x0238 0x053c 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA1__USDHC1_DATA1                   0x023c 0x0540 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA1__SAI4_TX_SYNC                   0x023c 0x0540 0x081c 0x01 0x01
+#define IMX94_PAD_SD1_DATA1__CAN5_RX                        0x023c 0x0540 0x0688 0x02 0x03
+#define IMX94_PAD_SD1_DATA1__NETC_1588MUX_INOUT3            0x023c 0x0540 0x0658 0x03 0x01
+#define IMX94_PAD_SD1_DATA1__FLEXIO2_4_1_FLEXIO3            0x023c 0x0540 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA1__GPIO4_IO11                     0x023c 0x0540 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA1__FLEXPWM3_PWMA3                 0x023c 0x0540 0x06b4 0x06 0x01
+#define IMX94_PAD_SD1_DATA1__SINC1_EMBIT1                   0x023c 0x0540 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA2__USDHC1_DATA2                   0x0240 0x0544 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA2__SAI4_TX_DATA0                  0x0240 0x0544 0x0000 0x01 0x00
+#define IMX94_PAD_SD1_DATA2__PMIC_READY                     0x0240 0x0544 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA2__NETC_1588MUX_INOUT4            0x0240 0x0544 0x065c 0x03 0x01
+#define IMX94_PAD_SD1_DATA2__FLEXIO2_4_1_FLEXIO4            0x0240 0x0544 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA2__GPIO4_IO12                     0x0240 0x0544 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA2__FLEXPWM3_PWMB3                 0x0240 0x0544 0x06c4 0x06 0x01
+#define IMX94_PAD_SD1_DATA2__SINC1_EMCLK2                   0x0240 0x0544 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA3__USDHC1_DATA3                   0x0244 0x0548 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA3__SAI4_RX_DATA0                  0x0244 0x0548 0x0810 0x01 0x01
+#define IMX94_PAD_SD1_DATA3__NETC_1588MUX_INOUT5            0x0244 0x0548 0x0660 0x03 0x01
+#define IMX94_PAD_SD1_DATA3__FLEXIO2_4_1_FLEXIO5            0x0244 0x0548 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA3__GPIO4_IO13                     0x0244 0x0548 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA3__FLEXPWM3_PWMA2                 0x0244 0x0548 0x06b0 0x06 0x01
+#define IMX94_PAD_SD1_DATA3__SINC1_EMBIT2                   0x0244 0x0548 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA4__USDHC1_DATA4                   0x0248 0x054c 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA4__SAI2_RX_DATA0                  0x0248 0x054c 0x07f0 0x01 0x02
+#define IMX94_PAD_SD1_DATA4__NETC_1588MUX_INOUT6            0x0248 0x054c 0x0664 0x03 0x01
+#define IMX94_PAD_SD1_DATA4__FLEXIO2_4_1_FLEXIO6            0x0248 0x054c 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA4__GPIO4_IO14                     0x0248 0x054c 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA4__FLEXPWM3_PWMB2                 0x0248 0x054c 0x06c0 0x06 0x01
+#define IMX94_PAD_SD1_DATA4__SINC1_EMCLK3                   0x0248 0x054c 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA5__USDHC1_DATA5                   0x024c 0x0550 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA5__SAI2_TX_DATA0                  0x024c 0x0550 0x0000 0x01 0x00
+#define IMX94_PAD_SD1_DATA5__USDHC1_RESET_B                 0x024c 0x0550 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA5__NETC_1588MUX_INOUT7            0x024c 0x0550 0x0668 0x03 0x01
+#define IMX94_PAD_SD1_DATA5__FLEXIO2_4_1_FLEXIO7            0x024c 0x0550 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA5__GPIO4_IO15                     0x024c 0x0550 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA5__FLEXPWM3_PWMA1                 0x024c 0x0550 0x06ac 0x06 0x01
+#define IMX94_PAD_SD1_DATA5__SINC1_EMBIT3                   0x024c 0x0550 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA6__USDHC1_DATA6                   0x0250 0x0554 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA6__SAI2_TX_BCLK                   0x0250 0x0554 0x07f8 0x01 0x02
+#define IMX94_PAD_SD1_DATA6__USDHC1_CD_B                    0x0250 0x0554 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA6__NETC_1588MUX_INOUT8            0x0250 0x0554 0x066c 0x03 0x01
+#define IMX94_PAD_SD1_DATA6__FLEXIO2_4_1_FLEXIO8            0x0250 0x0554 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA6__GPIO4_IO16                     0x0250 0x0554 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA6__FLEXPWM3_PWMB1                 0x0250 0x0554 0x06bc 0x06 0x01
+#define IMX94_PAD_SD1_DATA6__SINC1_MOD_CLK0                 0x0250 0x0554 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA7__USDHC1_DATA7                   0x0254 0x0558 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA7__SAI2_RX_SYNC                   0x0254 0x0558 0x07f4 0x01 0x02
+#define IMX94_PAD_SD1_DATA7__USDHC1_WP                      0x0254 0x0558 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA7__NETC_1588MUX_INOUT9            0x0254 0x0558 0x0670 0x03 0x01
+#define IMX94_PAD_SD1_DATA7__FLEXIO2_4_1_FLEXIO9            0x0254 0x0558 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA7__GPIO4_IO17                     0x0254 0x0558 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA7__FLEXPWM3_PWMA0                 0x0254 0x0558 0x06a8 0x06 0x01
+#define IMX94_PAD_SD1_DATA7__SINC1_MOD_CLK1                 0x0254 0x0558 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_STROBE__USDHC1_STROBE                 0x0258 0x055c 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_STROBE__SAI2_TX_SYNC                  0x0258 0x055c 0x07fc 0x01 0x02
+#define IMX94_PAD_SD1_STROBE__NETC_1588MUX_INOUT10          0x0258 0x055c 0x0674 0x03 0x01
+#define IMX94_PAD_SD1_STROBE__FLEXIO2_4_1_FLEXIO10          0x0258 0x055c 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_STROBE__GPIO4_IO18                    0x0258 0x055c 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_STROBE__FLEXPWM3_PWMB0                0x0258 0x055c 0x06b8 0x06 0x01
+#define IMX94_PAD_SD1_STROBE__SINC1_MOD_CLK2                0x0258 0x055c 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT               0x025c 0x0560 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_VSELECT__SAI4_MCLK                    0x025c 0x0560 0x0808 0x01 0x01
+#define IMX94_PAD_SD2_VSELECT__USDHC2_WP                    0x025c 0x0560 0x0854 0x02 0x02
+#define IMX94_PAD_SD2_VSELECT__NETC_1588MUX_INOUT10         0x025c 0x0560 0x0674 0x03 0x02
+#define IMX94_PAD_SD2_VSELECT__FLEXIO2_4_1_FLEXIO11         0x025c 0x0560 0x0694 0x04 0x01
+#define IMX94_PAD_SD2_VSELECT__GPIO4_IO19                   0x025c 0x0560 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_VSELECT__EXT_CLK1                     0x025c 0x0560 0x0624 0x06 0x01
+#define IMX94_PAD_SD2_VSELECT__XBAR1_XBAR_INOUT12           0x025c 0x0560 0x088c 0x07 0x02
+
+#define IMX94_PAD_XSPI1_DATA0__XSPI1_A_DATA0                0x0260 0x0564 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA0__SAI2_RX_SYNC                 0x0260 0x0564 0x07f4 0x01 0x03
+#define IMX94_PAD_XSPI1_DATA0__XSPI_SLV_DATA0               0x0260 0x0564 0x0908 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA0__FLEXIO1_3_3_FLEXIO0          0x0260 0x0564 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA0__GPIO7_IO16                   0x0260 0x0564 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA1__XSPI1_A_DATA1                0x0264 0x0568 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA1__SAI2_TX_SYNC                 0x0264 0x0568 0x07fc 0x01 0x03
+#define IMX94_PAD_XSPI1_DATA1__XSPI_SLV_DATA1               0x0264 0x0568 0x090c 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA1__FLEXIO1_3_3_FLEXIO1          0x0264 0x0568 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA1__GPIO7_IO17                   0x0264 0x0568 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA2__XSPI1_A_DATA2                0x0268 0x056c 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA2__SAI2_TX_DATA0                0x0268 0x056c 0x0000 0x01 0x00
+#define IMX94_PAD_XSPI1_DATA2__XSPI_SLV_DATA2               0x0268 0x056c 0x0910 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA2__FLEXIO1_3_3_FLEXIO2          0x0268 0x056c 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA2__GPIO7_IO18                   0x0268 0x056c 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA3__XSPI1_A_DATA3                0x026c 0x0570 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA3__SAI2_RX_DATA0                0x026c 0x0570 0x07f0 0x01 0x03
+#define IMX94_PAD_XSPI1_DATA3__SAI2_MCLK                    0x026c 0x0570 0x07e8 0x02 0x02
+#define IMX94_PAD_XSPI1_DATA3__XSPI_SLV_DATA3               0x026c 0x0570 0x0914 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA3__FLEXIO1_3_3_FLEXIO3          0x026c 0x0570 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA3__GPIO7_IO19                   0x026c 0x0570 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA4__XSPI1_A_DATA4                0x0270 0x0574 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA4__SAI4_RX_SYNC                 0x0270 0x0574 0x0814 0x01 0x02
+#define IMX94_PAD_XSPI1_DATA4__XSPI_SLV_DATA4               0x0270 0x0574 0x0918 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA4__FLEXIO1_3_3_FLEXIO4          0x0270 0x0574 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA4__GPIO7_IO20                   0x0270 0x0574 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA5__XSPI1_A_DATA5                0x0274 0x0578 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA5__SAI4_TX_SYNC                 0x0274 0x0578 0x081c 0x01 0x02
+#define IMX94_PAD_XSPI1_DATA5__XSPI_SLV_DATA5               0x0274 0x0578 0x091c 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA5__FLEXIO1_3_3_FLEXIO5          0x0274 0x0578 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA5__GPIO7_IO21                   0x0274 0x0578 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA6__XSPI1_A_DATA6                0x0278 0x057c 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA6__SAI4_TX_DATA0                0x0278 0x057c 0x0000 0x01 0x00
+#define IMX94_PAD_XSPI1_DATA6__XSPI_SLV_DATA6               0x0278 0x057c 0x0920 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA6__FLEXIO1_3_3_FLEXIO6          0x0278 0x057c 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA6__GPIO7_IO22                   0x0278 0x057c 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA7__XSPI1_A_DATA7                0x027c 0x0580 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA7__SAI4_RX_DATA0                0x027c 0x0580 0x0810 0x01 0x02
+#define IMX94_PAD_XSPI1_DATA7__SAI4_MCLK                    0x027c 0x0580 0x0808 0x02 0x02
+#define IMX94_PAD_XSPI1_DATA7__XSPI_SLV_DATA7               0x027c 0x0580 0x0924 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA7__FLEXIO1_3_3_FLEXIO7          0x027c 0x0580 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA7__GPIO7_IO23                   0x027c 0x0580 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DQS__XSPI1_A_DQS                    0x0280 0x0584 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DQS__SAI2_TX_BCLK                   0x0280 0x0584 0x07f8 0x01 0x03
+#define IMX94_PAD_XSPI1_DQS__XSPI_SLV_DQS                   0x0280 0x0584 0x0900 0x03 0x01
+#define IMX94_PAD_XSPI1_DQS__FLEXIO1_3_3_FLEXIO8            0x0280 0x0584 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DQS__GPIO7_IO24                     0x0280 0x0584 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_SCLK__XSPI1_A_SCLK                  0x0284 0x0588 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_SCLK__SAI4_TX_BCLK                  0x0284 0x0588 0x0818 0x01 0x02
+#define IMX94_PAD_XSPI1_SCLK__XSPI_SLV_CLK                  0x0284 0x0588 0x0904 0x03 0x01
+#define IMX94_PAD_XSPI1_SCLK__FLEXIO1_3_3_FLEXIO9           0x0284 0x0588 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_SCLK__GPIO7_IO25                    0x0284 0x0588 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_SS0_B__XSPI1_A_SS0_B                0x0288 0x058c 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_SS0_B__SAI4_RX_BCLK                 0x0288 0x058c 0x080c 0x01 0x02
+#define IMX94_PAD_XSPI1_SS0_B__XSPI_SLV_CS                  0x0288 0x058c 0x08fc 0x03 0x01
+#define IMX94_PAD_XSPI1_SS0_B__FLEXIO1_3_3_FLEXIO10         0x0288 0x058c 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_SS0_B__GPIO7_IO26                   0x0288 0x058c 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_SS1_B__XSPI1_A_SS1_B                0x028c 0x0590 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_SS1_B__SAI2_RX_BCLK                 0x028c 0x0590 0x07ec 0x01 0x02
+#define IMX94_PAD_XSPI1_SS1_B__FLEXPWM3_PWMX3               0x028c 0x0590 0x0000 0x03 0x00
+#define IMX94_PAD_XSPI1_SS1_B__FLEXIO1_3_3_FLEXIO11         0x028c 0x0590 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_SS1_B__GPIO7_IO27                   0x028c 0x0590 0x0000 0x05 0x00
+#define IMX94_PAD_XSPI1_SS1_B__SINC1_MOD_CLK0               0x028c 0x0590 0x0000 0x06 0x00
+#define IMX94_PAD_XSPI1_SS1_B__SINC_FILTER_GLUE1_BREAK      0x028c 0x0590 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_CD_B__USDHC2_CD_B                     0x0290 0x0594 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_CD_B__NETC_PINMUX_ETH4_RX_CTL         0x0290 0x0594 0x0634 0x01 0x01
+#define IMX94_PAD_SD2_CD_B__I3C2_SCL                        0x0290 0x0594 0x0720 0x02 0x03
+#define IMX94_PAD_SD2_CD_B__NETC_1588MUX_INOUT9             0x0290 0x0594 0x0670 0x03 0x02
+#define IMX94_PAD_SD2_CD_B__FLEXIO2_4_2_FLEXIO0             0x0290 0x0594 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_CD_B__GPIO4_IO20                      0x0290 0x0594 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_CD_B__XBAR1_XBAR_INOUT13              0x0290 0x0594 0x0890 0x06 0x02
+#define IMX94_PAD_SD2_CD_B__SINC2_EMCLK0                    0x0290 0x0594 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_CLK__USDHC2_CLK                       0x0294 0x0598 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_CLK__NETC_PINMUX_ETH4_TX_CLK          0x0294 0x0598 0x0648 0x01 0x01
+#define IMX94_PAD_SD2_CLK__I3C2_SDA                         0x0294 0x0598 0x0724 0x02 0x03
+#define IMX94_PAD_SD2_CLK__NETC_1588MUX_INOUT8              0x0294 0x0598 0x066c 0x03 0x02
+#define IMX94_PAD_SD2_CLK__FLEXIO2_4_2_FLEXIO1              0x0294 0x0598 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_CLK__GPIO4_IO21                       0x0294 0x0598 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_CLK__OBSERVE0                         0x0294 0x0598 0x0000 0x06 0x00
+#define IMX94_PAD_SD2_CLK__SINC2_EMBIT0                     0x0294 0x0598 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_CMD__USDHC2_CMD                       0x0298 0x059c 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_CMD__NETC_PINMUX_ETH4_TX_CTL          0x0298 0x059c 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_CMD__I3C2_PUR                         0x0298 0x059c 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_CMD__I3C2_PUR_B                       0x0298 0x059c 0x0000 0x03 0x00
+#define IMX94_PAD_SD2_CMD__FLEXIO2_4_2_FLEXIO2              0x0298 0x059c 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_CMD__GPIO4_IO22                       0x0298 0x059c 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_CMD__OBSERVE1                         0x0298 0x059c 0x0000 0x06 0x00
+#define IMX94_PAD_SD2_CMD__SINC2_EMCLK1                     0x0298 0x059c 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_DATA0__USDHC2_DATA0                   0x029c 0x05a0 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_DATA0__NETC_PINMUX_ETH4_TXD0          0x029c 0x05a0 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_DATA0__CAN2_TX                        0x029c 0x05a0 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_DATA0__NETC_1588MUX_INOUT7            0x029c 0x05a0 0x0668 0x03 0x02
+#define IMX94_PAD_SD2_DATA0__FLEXIO2_4_2_FLEXIO3            0x029c 0x05a0 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_DATA0__GPIO4_IO23                     0x029c 0x05a0 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_DATA0__OBSERVE2                       0x029c 0x05a0 0x0000 0x06 0x00
+#define IMX94_PAD_SD2_DATA0__SINC2_EMBIT1                   0x029c 0x05a0 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_DATA1__USDHC2_DATA1                   0x02a0 0x05a4 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_DATA1__NETC_PINMUX_ETH4_TXD1          0x02a0 0x05a4 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_DATA1__CAN2_RX                        0x02a0 0x05a4 0x067c 0x02 0x04
+#define IMX94_PAD_SD2_DATA1__NETC_1588MUX_INOUT6            0x02a0 0x05a4 0x0664 0x03 0x02
+#define IMX94_PAD_SD2_DATA1__FLEXIO2_4_2_FLEXIO4            0x02a0 0x05a4 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_DATA1__GPIO4_IO24                     0x02a0 0x05a4 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_DATA1__XBAR1_XBAR_INOUT14             0x02a0 0x05a4 0x0894 0x06 0x02
+#define IMX94_PAD_SD2_DATA1__SINC2_EMCLK2                   0x02a0 0x05a4 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_DATA2__USDHC2_DATA2                   0x02a4 0x05a8 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_DATA2__NETC_PINMUX_ETH4_TXD2          0x02a4 0x05a8 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_DATA2__MQS2_RIGHT                     0x02a4 0x05a8 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_DATA2__NETC_1588MUX_INOUT5            0x02a4 0x05a8 0x0660 0x03 0x02
+#define IMX94_PAD_SD2_DATA2__FLEXIO2_4_2_FLEXIO5            0x02a4 0x05a8 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_DATA2__GPIO4_IO25                     0x02a4 0x05a8 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_DATA2__XBAR1_XBAR_INOUT15             0x02a4 0x05a8 0x0898 0x06 0x01
+#define IMX94_PAD_SD2_DATA2__SINC2_EMBIT2                   0x02a4 0x05a8 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_DATA3__USDHC2_DATA3                   0x02a8 0x05ac 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_DATA3__NETC_PINMUX_ETH4_TXD3          0x02a8 0x05ac 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_DATA3__MQS2_LEFT                      0x02a8 0x05ac 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_DATA3__LPTMR2_ALT0                    0x02a8 0x05ac 0x0780 0x03 0x01
+#define IMX94_PAD_SD2_DATA3__FLEXIO2_4_2_FLEXIO6            0x02a8 0x05ac 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_DATA3__GPIO4_IO26                     0x02a8 0x05ac 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_DATA3__XBAR1_XBAR_INOUT16             0x02a8 0x05ac 0x089c 0x06 0x01
+#define IMX94_PAD_SD2_DATA3__SINC2_EMCLK3                   0x02a8 0x05ac 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_RESET_B__USDHC2_RESET_B               0x02ac 0x05b0 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_RESET_B__NETC_PINMUX_ETH4_RXD0        0x02ac 0x05b0 0x0638 0x01 0x01
+#define IMX94_PAD_SD2_RESET_B__NETC_1588MUX_INOUT4          0x02ac 0x05b0 0x065c 0x02 0x02
+#define IMX94_PAD_SD2_RESET_B__LPTMR2_ALT1                  0x02ac 0x05b0 0x0784 0x03 0x01
+#define IMX94_PAD_SD2_RESET_B__FLEXIO2_4_2_FLEXIO7          0x02ac 0x05b0 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_RESET_B__GPIO4_IO27                   0x02ac 0x05b0 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_RESET_B__XBAR1_XBAR_INOUT17           0x02ac 0x05b0 0x08a0 0x06 0x01
+#define IMX94_PAD_SD2_RESET_B__SINC2_EMBIT3                 0x02ac 0x05b0 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_GPIO0__USDHC2_WP                      0x02b0 0x05b4 0x0854 0x00 0x03
+#define IMX94_PAD_SD2_GPIO0__NETC_PINMUX_ETH4_RXD1          0x02b0 0x05b4 0x063c 0x01 0x01
+#define IMX94_PAD_SD2_GPIO0__NETC_1588MUX_INOUT3            0x02b0 0x05b4 0x0658 0x03 0x02
+#define IMX94_PAD_SD2_GPIO0__FLEXIO2_4_2_FLEXIO8            0x02b0 0x05b4 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_GPIO0__GPIO4_IO28                     0x02b0 0x05b4 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_GPIO0__XBAR1_XBAR_INOUT18             0x02b0 0x05b4 0x08a4 0x06 0x01
+#define IMX94_PAD_SD2_GPIO0__SINC2_MOD_CLK1                 0x02b0 0x05b4 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_GPIO1__LPTMR2_ALT2                    0x02b4 0x05b8 0x0788 0x00 0x01
+#define IMX94_PAD_SD2_GPIO1__NETC_PINMUX_ETH4_RXD2          0x02b4 0x05b8 0x0640 0x01 0x01
+#define IMX94_PAD_SD2_GPIO1__ECAT_CLK25                     0x02b4 0x05b8 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_GPIO1__NETC_1588MUX_INOUT2            0x02b4 0x05b8 0x0654 0x03 0x02
+#define IMX94_PAD_SD2_GPIO1__FLEXIO2_4_2_FLEXIO9            0x02b4 0x05b8 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_GPIO1__GPIO4_IO29                     0x02b4 0x05b8 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_GPIO1__XBAR1_XBAR_INOUT19             0x02b4 0x05b8 0x08a8 0x06 0x01
+#define IMX94_PAD_SD2_GPIO1__SINC2_MOD_CLK0                 0x02b4 0x05b8 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_GPIO2__NETC_PINMUX_ETH4_RXD3          0x02b8 0x05bc 0x0644 0x01 0x01
+#define IMX94_PAD_SD2_GPIO2__CAN5_TX                        0x02b8 0x05bc 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_GPIO2__NETC_1588MUX_INOUT1            0x02b8 0x05bc 0x0650 0x03 0x02
+#define IMX94_PAD_SD2_GPIO2__FLEXIO2_4_2_FLEXIO10           0x02b8 0x05bc 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_GPIO2__GPIO4_IO30                     0x02b8 0x05bc 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_GPIO2__XBAR1_XBAR_INOUT20             0x02b8 0x05bc 0x08ac 0x06 0x01
+#define IMX94_PAD_SD2_GPIO2__SINC2_MOD_CLK2                 0x02b8 0x05bc 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_GPIO3__NETC_PINMUX_ETH4_RX_CLK        0x02bc 0x05c0 0x0630 0x01 0x01
+#define IMX94_PAD_SD2_GPIO3__CAN5_RX                        0x02bc 0x05c0 0x0688 0x02 0x04
+#define IMX94_PAD_SD2_GPIO3__NETC_1588MUX_INOUT0            0x02bc 0x05c0 0x064c 0x03 0x02
+#define IMX94_PAD_SD2_GPIO3__FLEXIO2_4_2_FLEXIO11           0x02bc 0x05c0 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_GPIO3__GPIO4_IO31                     0x02bc 0x05c0 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_GPIO3__XBAR1_XBAR_INOUT21             0x02bc 0x05c0 0x0000 0x06 0x00
+#define IMX94_PAD_SD2_GPIO3__SINC_FILTER_GLUE2_BREAK        0x02bc 0x05c0 0x0000 0x07 0x00
+
+#define IMX94_PAD_I2C1_SCL__LPI2C1_SCL                      0x02c0 0x05c4 0x0000 0x00 0x00
+#define IMX94_PAD_I2C1_SCL__I3C1_SCL                        0x02c0 0x05c4 0x0000 0x01 0x00
+#define IMX94_PAD_I2C1_SCL__LPUART1_DCD_B                   0x02c0 0x05c4 0x0000 0x02 0x00
+#define IMX94_PAD_I2C1_SCL__TPM2_CH0                        0x02c0 0x05c4 0x0000 0x03 0x00
+#define IMX94_PAD_I2C1_SCL__SAI1_RX_SYNC                    0x02c0 0x05c4 0x0000 0x04 0x00
+#define IMX94_PAD_I2C1_SCL__GPIO1_IO0                       0x02c0 0x05c4 0x0000 0x05 0x00
+
+#define IMX94_PAD_I2C1_SDA__LPI2C1_SDA                      0x02c4 0x05c8 0x0000 0x00 0x00
+#define IMX94_PAD_I2C1_SDA__I3C1_SDA                        0x02c4 0x05c8 0x0000 0x01 0x00
+#define IMX94_PAD_I2C1_SDA__LPUART1_RIN_B                   0x02c4 0x05c8 0x0000 0x02 0x00
+#define IMX94_PAD_I2C1_SDA__TPM2_CH1                        0x02c4 0x05c8 0x0000 0x03 0x00
+#define IMX94_PAD_I2C1_SDA__SAI1_RX_BCLK                    0x02c4 0x05c8 0x0000 0x04 0x00
+#define IMX94_PAD_I2C1_SDA__GPIO1_IO1                       0x02c4 0x05c8 0x0000 0x05 0x00
+
+#define IMX94_PAD_I2C2_SCL__LPI2C2_SCL                      0x02c8 0x05cc 0x0000 0x00 0x00
+#define IMX94_PAD_I2C2_SCL__I3C1_PUR                        0x02c8 0x05cc 0x0000 0x01 0x00
+#define IMX94_PAD_I2C2_SCL__LPUART2_DCD_B                   0x02c8 0x05cc 0x0000 0x02 0x00
+#define IMX94_PAD_I2C2_SCL__TPM2_CH2                        0x02c8 0x05cc 0x0000 0x03 0x00
+#define IMX94_PAD_I2C2_SCL__GPT1_CLK                        0x02c8 0x05cc 0x060c 0x04 0x00
+#define IMX94_PAD_I2C2_SCL__GPIO1_IO2                       0x02c8 0x05cc 0x0000 0x05 0x00
+#define IMX94_PAD_I2C2_SCL__I3C1_PUR_B                      0x02c8 0x05cc 0x0000 0x06 0x00
+#define IMX94_PAD_I2C2_SCL__LPIT1_TRIGGER0                  0x02c8 0x05cc 0x0000 0x07 0x00
+
+#define IMX94_PAD_I2C2_SDA__LPI2C2_SDA                      0x02cc 0x05d0 0x0000 0x00 0x00
+#define IMX94_PAD_I2C2_SDA__LPI2C1_HREQ                     0x02cc 0x05d0 0x0000 0x01 0x00
+#define IMX94_PAD_I2C2_SDA__LPUART2_RIN_B                   0x02cc 0x05d0 0x0000 0x02 0x00
+#define IMX94_PAD_I2C2_SDA__TPM2_CH3                        0x02cc 0x05d0 0x0000 0x03 0x00
+#define IMX94_PAD_I2C2_SDA__SAI1_MCLK                       0x02cc 0x05d0 0x0620 0x04 0x00
+#define IMX94_PAD_I2C2_SDA__GPIO1_IO3                       0x02cc 0x05d0 0x0000 0x05 0x00
+#define IMX94_PAD_I2C2_SDA__EWM_OUT_B                       0x02cc 0x05d0 0x0000 0x06 0x00
+#define IMX94_PAD_I2C2_SDA__LPIT1_TRIGGER1                  0x02cc 0x05d0 0x0000 0x07 0x00
+
+#define IMX94_PAD_UART1_RXD__LPUART1_RX                     0x02d0 0x05d4 0x0000 0x00 0x00
+#define IMX94_PAD_UART1_RXD__S400_UART_RX                   0x02d0 0x05d4 0x0000 0x01 0x00
+#define IMX94_PAD_UART1_RXD__LPSPI2_SIN                     0x02d0 0x05d4 0x0000 0x02 0x00
+#define IMX94_PAD_UART1_RXD__TPM1_CH0                       0x02d0 0x05d4 0x0000 0x03 0x00
+#define IMX94_PAD_UART1_RXD__GPT1_CAPTURE1                  0x02d0 0x05d4 0x0000 0x04 0x00
+#define IMX94_PAD_UART1_RXD__GPIO1_IO4                      0x02d0 0x05d4 0x0000 0x05 0x00
+
+#define IMX94_PAD_UART1_TXD__LPUART1_TX                     0x02d4 0x05d8 0x0000 0x00 0x00
+#define IMX94_PAD_UART1_TXD__S400_UART_TX                   0x02d4 0x05d8 0x0000 0x01 0x00
+#define IMX94_PAD_UART1_TXD__LPSPI2_PCS0                    0x02d4 0x05d8 0x0000 0x02 0x00
+#define IMX94_PAD_UART1_TXD__TPM1_CH1                       0x02d4 0x05d8 0x0000 0x03 0x00
+#define IMX94_PAD_UART1_TXD__GPT1_COMPARE1                  0x02d4 0x05d8 0x0000 0x04 0x00
+#define IMX94_PAD_UART1_TXD__GPIO1_IO5                      0x02d4 0x05d8 0x0000 0x05 0x00
+
+#define IMX94_PAD_UART2_RXD__LPUART2_RX                     0x02d8 0x05dc 0x0000 0x00 0x00
+#define IMX94_PAD_UART2_RXD__LPUART1_CTS_B                  0x02d8 0x05dc 0x0000 0x01 0x00
+#define IMX94_PAD_UART2_RXD__LPSPI2_SOUT                    0x02d8 0x05dc 0x0000 0x02 0x00
+#define IMX94_PAD_UART2_RXD__TPM1_CH2                       0x02d8 0x05dc 0x0000 0x03 0x00
+#define IMX94_PAD_UART2_RXD__SAI1_MCLK                      0x02d8 0x05dc 0x0620 0x04 0x01
+#define IMX94_PAD_UART2_RXD__GPIO1_IO6                      0x02d8 0x05dc 0x0000 0x05 0x00
+#define IMX94_PAD_UART2_RXD__GPT1_CLK                       0x02d8 0x05dc 0x060c 0x06 0x01
+#define IMX94_PAD_UART2_RXD__LPIT1_TRIGGER2                 0x02d8 0x05dc 0x0000 0x07 0x00
+
+#define IMX94_PAD_UART2_TXD__LPUART2_TX                     0x02dc 0x05e0 0x0000 0x00 0x00
+#define IMX94_PAD_UART2_TXD__LPUART1_RTS_B                  0x02dc 0x05e0 0x0000 0x01 0x00
+#define IMX94_PAD_UART2_TXD__LPSPI2_SCK                     0x02dc 0x05e0 0x0000 0x02 0x00
+#define IMX94_PAD_UART2_TXD__TPM1_CH3                       0x02dc 0x05e0 0x0000 0x03 0x00
+#define IMX94_PAD_UART2_TXD__GPIO1_IO7                      0x02dc 0x05e0 0x0000 0x05 0x00
+
+#define IMX94_PAD_PDM_CLK__PDM_CLK                          0x02e0 0x05e4 0x0000 0x00 0x00
+#define IMX94_PAD_PDM_CLK__MQS1_LEFT                        0x02e0 0x05e4 0x0000 0x01 0x00
+#define IMX94_PAD_PDM_CLK__LPTMR1_ALT0                      0x02e0 0x05e4 0x0000 0x04 0x00
+#define IMX94_PAD_PDM_CLK__GPIO1_IO8                        0x02e0 0x05e4 0x0000 0x05 0x00
+#define IMX94_PAD_PDM_CLK__CAN1_TX                          0x02e0 0x05e4 0x0000 0x06 0x00
+#define IMX94_PAD_PDM_CLK__EWM_OUT_B                        0x02e0 0x05e4 0x0000 0x07 0x00
+
+#define IMX94_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0          0x02e4 0x05e8 0x0610 0x00 0x02
+#define IMX94_PAD_PDM_BIT_STREAM0__MQS1_RIGHT               0x02e4 0x05e8 0x0000 0x01 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1              0x02e4 0x05e8 0x0000 0x02 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK              0x02e4 0x05e8 0x0000 0x03 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__LPTMR1_ALT1              0x02e4 0x05e8 0x0000 0x04 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__GPIO1_IO9                0x02e4 0x05e8 0x0000 0x05 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__CAN1_RX                  0x02e4 0x05e8 0x0608 0x06 0x00
+
+#define IMX94_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1          0x02e8 0x05ec 0x0614 0x00 0x03
+#define IMX94_PAD_PDM_BIT_STREAM1__NMI_GLUE_NMI             0x02e8 0x05ec 0x0000 0x01 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1              0x02e8 0x05ec 0x0000 0x02 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK              0x02e8 0x05ec 0x0000 0x03 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__LPTMR1_ALT2              0x02e8 0x05ec 0x0000 0x04 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__GPIO1_IO10               0x02e8 0x05ec 0x0000 0x05 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__EXT_CLK1                 0x02e8 0x05ec 0x0624 0x06 0x00
+
+#define IMX94_PAD_SAI1_TXFS__SAI1_TX_SYNC                   0x02ec 0x05f0 0x0000 0x00 0x00
+#define IMX94_PAD_SAI1_TXFS__SAI1_TX_DATA1                  0x02ec 0x05f0 0x0000 0x01 0x00
+#define IMX94_PAD_SAI1_TXFS__LPSPI1_PCS0                    0x02ec 0x05f0 0x0000 0x02 0x00
+#define IMX94_PAD_SAI1_TXFS__LPUART2_DTR_B                  0x02ec 0x05f0 0x0000 0x03 0x00
+#define IMX94_PAD_SAI1_TXFS__MQS1_LEFT                      0x02ec 0x05f0 0x0000 0x04 0x00
+#define IMX94_PAD_SAI1_TXFS__GPIO1_IO11                     0x02ec 0x05f0 0x0000 0x05 0x00
+#define IMX94_PAD_SAI1_TXFS__EWM_OUT_B                      0x02ec 0x05f0 0x0000 0x06 0x00
+
+#define IMX94_PAD_SAI1_TXC__SAI1_TX_BCLK                    0x02f0 0x05f4 0x0000 0x00 0x00
+#define IMX94_PAD_SAI1_TXC__LPUART2_CTS_B                   0x02f0 0x05f4 0x0000 0x01 0x00
+#define IMX94_PAD_SAI1_TXC__LPSPI1_SIN                      0x02f0 0x05f4 0x0000 0x02 0x00
+#define IMX94_PAD_SAI1_TXC__LPUART1_DSR_B                   0x02f0 0x05f4 0x0000 0x03 0x00
+#define IMX94_PAD_SAI1_TXC__CAN1_RX                         0x02f0 0x05f4 0x0608 0x04 0x01
+#define IMX94_PAD_SAI1_TXC__GPIO1_IO12                      0x02f0 0x05f4 0x0000 0x05 0x00
+
+#define IMX94_PAD_SAI1_TXD0__SAI1_TX_DATA0                  0x02f4 0x05f8 0x0000 0x00 0x00
+#define IMX94_PAD_SAI1_TXD0__LPUART2_RTS_B                  0x02f4 0x05f8 0x0000 0x01 0x00
+#define IMX94_PAD_SAI1_TXD0__LPSPI1_SCK                     0x02f4 0x05f8 0x0000 0x02 0x00
+#define IMX94_PAD_SAI1_TXD0__LPUART1_DTR_B                  0x02f4 0x05f8 0x0000 0x03 0x00
+#define IMX94_PAD_SAI1_TXD0__CAN1_TX                        0x02f4 0x05f8 0x0000 0x04 0x00
+#define IMX94_PAD_SAI1_TXD0__GPIO1_IO13                     0x02f4 0x05f8 0x0000 0x05 0x00
+
+#define IMX94_PAD_SAI1_RXD0__SAI1_RX_DATA0                  0x02f8 0x05fc 0x0000 0x00 0x00
+#define IMX94_PAD_SAI1_RXD0__SAI1_MCLK                      0x02f8 0x05fc 0x0620 0x01 0x02
+#define IMX94_PAD_SAI1_RXD0__LPSPI1_SOUT                    0x02f8 0x05fc 0x0000 0x02 0x00
+#define IMX94_PAD_SAI1_RXD0__LPUART2_DSR_B                  0x02f8 0x05fc 0x0000 0x03 0x00
+#define IMX94_PAD_SAI1_RXD0__MQS1_RIGHT                     0x02f8 0x05fc 0x0000 0x04 0x00
+#define IMX94_PAD_SAI1_RXD0__GPIO1_IO14                     0x02f8 0x05fc 0x0000 0x05 0x00
+#define IMX94_PAD_SAI1_RXD0__LPIT1_TRIGGER3                 0x02f8 0x05fc 0x0000 0x07 0x00
+
+#define IMX94_PAD_WDOG_ANY__WDOG_ANY                        0x02fc 0x0600 0x0000 0x00 0x00
+#define IMX94_PAD_WDOG_ANY__FCCU_EOUT1                      0x02fc 0x0600 0x0000 0x01 0x00
+#define IMX94_PAD_WDOG_ANY__GPIO1_IO15                      0x02fc 0x0600 0x0000 0x05 0x00
+#endif /* __DTS_IMX94_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx94-power.h b/arch/arm64/boot/dts/freescale/imx94-power.h
new file mode 100644
index 000000000000..5209afed60ed
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx94-power.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ *  Copyright 2024-2025 NXP
+ */
+
+#ifndef __IMX94_POWER_H
+#define __IMX94_POWER_H
+
+#define IMX94_PD_ANA		0
+#define IMX94_PD_AON		1
+#define IMX94_PD_BBSM		2
+#define IMX94_PD_M71		3
+#define IMX94_PD_CCMSRCGPC	4
+#define IMX94_PD_A55C0		5
+#define IMX94_PD_A55C1		6
+#define IMX94_PD_A55C2		7
+#define IMX94_PD_A55C3		8
+#define IMX94_PD_A55P		9
+#define IMX94_PD_DDR		10
+#define IMX94_PD_DISPLAY	11
+#define IMX94_PD_M70		12
+#define IMX94_PD_HSIO_TOP	13
+#define IMX94_PD_HSIO_WAON	14
+#define IMX94_PD_NETC		15
+#define IMX94_PD_NOC		16
+#define IMX94_PD_NPU		17
+#define IMX94_PD_WAKEUP		18
+
+#define IMX94_PERF_M33		0
+#define IMX94_PERF_M33S		1
+#define IMX94_PERF_WAKEUP	2
+#define IMX94_PERF_M70		3
+#define IMX94_PERF_M71		4
+#define IMX94_PERF_DRAM		5
+#define IMX94_PERF_HSIO		6
+#define IMX94_PERF_NPU		7
+#define IMX94_PERF_NOC		8
+#define IMX94_PERF_A55		9
+#define IMX94_PERF_DISP		10
+
+#endif /* __IMX94_POWER_H */
diff --git a/arch/arm64/boot/dts/freescale/imx94.dtsi b/arch/arm64/boot/dts/freescale/imx94.dtsi
new file mode 100644
index 000000000000..d4a880496b0e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx94.dtsi
@@ -0,0 +1,1194 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024-2025 NXP
+ */
+
+#include <dt-bindings/dma/fsl-edma.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "imx94-clock.h"
+#include "imx94-pinfunc.h"
+#include "imx94-power.h"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	osc_24m: clock-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "dummy";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	sai1_mclk: clock-sai1-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai1_mclk";
+	};
+
+	sai2_mclk: clock-sai2-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai2_mclk";
+	};
+
+	sai3_mclk: clock-sai3-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai3_mclk";
+	};
+
+	sai4_mclk: clock-sai4-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai4_mclk";
+	};
+
+	firmware {
+		scmi {
+			compatible = "arm,scmi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>, <&mu2 5 1>;
+			shmem = <&scmi_buf0>, <&scmi_buf1>;
+			arm,max-rx-timeout-ms = <5000>;
+
+			scmi_devpd: protocol@11 {
+				reg = <0x11>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_sys_power: protocol@12 {
+				reg = <0x12>;
+			};
+
+			scmi_perf: protocol@13 {
+				reg = <0x13>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_iomuxc: protocol@19 {
+				reg = <0x19>;
+			};
+
+			scmi_bbm: protocol@81 {
+				reg = <0x81>;
+			};
+
+			scmi_misc: protocol@84 {
+				reg = <0x84>;
+			};
+		};
+	};
+
+	mqs1: mqs1 {
+		compatible = "fsl,imx943-aonmix-mqs";
+		status = "disabled";
+	};
+
+	mqs2: mqs2 {
+		compatible = "fsl,imx943-wakeupmix-mqs";
+		status = "disabled";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		interrupt-parent = <&gic>;
+		arm,no-tick-in-suspend;
+	};
+
+	gic: interrupt-controller@48000000 {
+		compatible = "arm,gic-v3";
+		reg = <0 0x48000000 0 0x10000>,
+		      <0 0x48060000 0 0xc0000>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-noncoherent;
+		interrupt-parent = <&gic>;
+
+		its: msi-controller@48040000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0 0x48040000 0 0x20000>;
+			#msi-cells = <1>;
+			dma-noncoherent;
+			msi-controller;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		aips2: bus@42000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x42000000 0x0 0x800000>;
+			ranges = <0x42000000 0x0 0x42000000 0x8000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			edma2: dma-controller@42000000 {
+				compatible = "fsl,imx94-edma5", "fsl,imx95-edma5";
+				reg = <0x42000000 0x210000>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "dma";
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts-extended = <&a55_irqsteer 0>, <&a55_irqsteer 1>,
+						      <&a55_irqsteer 2>, <&a55_irqsteer 3>,
+						      <&a55_irqsteer 4>, <&a55_irqsteer 5>,
+						      <&a55_irqsteer 6>, <&a55_irqsteer 7>,
+						      <&a55_irqsteer 8>, <&a55_irqsteer 9>,
+						      <&a55_irqsteer 10>, <&a55_irqsteer 11>,
+						      <&a55_irqsteer 12>, <&a55_irqsteer 13>,
+						      <&a55_irqsteer 14>, <&a55_irqsteer 15>,
+						      <&a55_irqsteer 16>, <&a55_irqsteer 17>,
+						      <&a55_irqsteer 18>, <&a55_irqsteer 19>,
+						      <&a55_irqsteer 20>, <&a55_irqsteer 21>,
+						      <&a55_irqsteer 22>, <&a55_irqsteer 23>,
+						      <&a55_irqsteer 24>, <&a55_irqsteer 25>,
+						      <&a55_irqsteer 26>, <&a55_irqsteer 27>,
+						      <&a55_irqsteer 28>, <&a55_irqsteer 29>,
+						      <&a55_irqsteer 30>, <&a55_irqsteer 31>,
+						      <&a55_irqsteer 64>, <&a55_irqsteer 65>,
+						      <&a55_irqsteer 66>, <&a55_irqsteer 67>,
+						      <&a55_irqsteer 68>, <&a55_irqsteer 69>,
+						      <&a55_irqsteer 70>, <&a55_irqsteer 71>,
+						      <&a55_irqsteer 72>, <&a55_irqsteer 73>,
+						      <&a55_irqsteer 74>, <&a55_irqsteer 75>,
+						      <&a55_irqsteer 76>, <&a55_irqsteer 77>,
+						      <&a55_irqsteer 78>, <&a55_irqsteer 79>,
+						      <&a55_irqsteer 80>, <&a55_irqsteer 81>,
+						      <&a55_irqsteer 82>, <&a55_irqsteer 83>,
+						      <&a55_irqsteer 84>, <&a55_irqsteer 85>,
+						      <&a55_irqsteer 86>, <&a55_irqsteer 87>,
+						      <&a55_irqsteer 88>, <&a55_irqsteer 89>,
+						      <&a55_irqsteer 90>, <&a55_irqsteer 91>,
+						      <&a55_irqsteer 92>, <&a55_irqsteer 93>,
+						      <&a55_irqsteer 94>, <&a55_irqsteer 95>,
+						      <&gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			mu10: mailbox@42430000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42430000 0x10000>;
+				interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			i3c2: i3c@42520000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x42520000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_I3C2SLOW>,
+					 <&dummy>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			lpi2c3: i2c@42530000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42530000 0x10000>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C3>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 5 0 0>, <&edma2 6 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c4: i2c@42540000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42540000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C4>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 4 0 0>, <&edma4 5 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi3: spi@42550000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42550000 0x10000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI3>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 7 0 0>, <&edma2 8 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi4: spi@42560000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42560000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI4>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 6 0 0>, <&edma4 7 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart3: serial@42570000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42570000 0x1000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART3>;
+				clock-names = "ipg";
+				dmas = <&edma2 10 0 FSL_EDMA_RX>, <&edma2 9 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart4: serial@42580000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42580000 0x1000>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART4>;
+				clock-names = "ipg";
+				dmas = <&edma4 10 0 FSL_EDMA_RX>, <&edma4 9 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart5: serial@42590000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42590000 0x1000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART5>;
+				clock-names = "ipg";
+				dmas = <&edma2 12 0 FSL_EDMA_RX>, <&edma2 11 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart6: serial@425a0000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x425a0000 0x1000>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART6>;
+				clock-names = "ipg";
+				dmas = <&edma4 12 0 FSL_EDMA_RX>, <&edma4 11 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan2: can@425b0000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x425b0000 0x10000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_CAN2>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN2>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			flexcan3: can@425e0000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x425e0000 0x10000>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_CAN3>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN3>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			flexcan4: can@425f0000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x425f0000 0x10000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_CAN4>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN4>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			flexcan5: can@42600000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x42600000 0x10000>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_CAN5>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN5>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			sai2: sai@42650000 {
+				compatible = "fsl,imx94-sai", "fsl,imx95-sai";
+				reg = <0x42650000 0x10000>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>, <&dummy>,
+					<&scmi_clk IMX94_CLK_SAI2>, <&dummy>, <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 30 0 FSL_EDMA_RX>, <&edma2 29 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			sai3: sai@42660000 {
+				compatible = "fsl,imx94-sai", "fsl,imx95-sai";
+				reg = <0x42660000 0x10000>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>, <&dummy>,
+					<&scmi_clk IMX94_CLK_SAI3>, <&dummy>, <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 32 0 FSL_EDMA_RX>, <&edma2 31 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			sai4: sai@42670000 {
+				compatible = "fsl,imx94-sai", "fsl,imx95-sai";
+				reg = <0x42670000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>, <&dummy>,
+					<&scmi_clk IMX94_CLK_SAI4>, <&dummy>, <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 36 0 FSL_EDMA_RX>, <&edma2 35 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			lpuart7: serial@42690000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42690000 0x1000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART7>;
+				clock-names = "ipg";
+				dmas = <&edma2 46 0 FSL_EDMA_RX>, <&edma2 45 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart8: serial@426a0000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x426a0000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART8>;
+				clock-names = "ipg";
+				dmas = <&edma4 39 0 FSL_EDMA_RX>, <&edma4 38 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpi2c5: i2c@426b0000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426b0000 0x10000>;
+				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C5>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 37 0 0>, <&edma2 38 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c6: i2c@426c0000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426c0000 0x10000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C6>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 30 0 0>, <&edma4 31 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c7: i2c@426d0000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426d0000 0x10000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C7>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 39 0 0>, <&edma2 40 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c8: i2c@426e0000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426e0000 0x10000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C8>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 32 0 0>, <&edma4 33 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi5: spi@426f0000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x426f0000 0x10000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI5>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 41 0 0>, <&edma2 42 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi6: spi@42700000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42700000 0x10000>;
+				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI6>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 34 0 0>, <&edma4 35 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi7: spi@42710000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42710000 0x10000>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI7>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 43 0 0>, <&edma2 44 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi8: spi@42720000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42720000 0x10000>;
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI8>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 36 0 0>, <&edma4 37 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			mu11: mailbox@42730000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42730000 0x10000>;
+				interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			edma4: dma-controller@42df0000 {
+				compatible = "fsl,imx94-edma5", "fsl,imx95-edma5";
+				reg = <0x42df0000 0x210000>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "dma";
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts-extended = <&a55_irqsteer 128>, <&a55_irqsteer 129>,
+						      <&a55_irqsteer 130>, <&a55_irqsteer 131>,
+						      <&a55_irqsteer 132>, <&a55_irqsteer 133>,
+						      <&a55_irqsteer 134>, <&a55_irqsteer 135>,
+						      <&a55_irqsteer 136>, <&a55_irqsteer 137>,
+						      <&a55_irqsteer 138>, <&a55_irqsteer 139>,
+						      <&a55_irqsteer 140>, <&a55_irqsteer 141>,
+						      <&a55_irqsteer 142>, <&a55_irqsteer 143>,
+						      <&a55_irqsteer 144>, <&a55_irqsteer 145>,
+						      <&a55_irqsteer 146>, <&a55_irqsteer 147>,
+						      <&a55_irqsteer 148>, <&a55_irqsteer 149>,
+						      <&a55_irqsteer 150>, <&a55_irqsteer 151>,
+						      <&a55_irqsteer 152>, <&a55_irqsteer 153>,
+						      <&a55_irqsteer 154>, <&a55_irqsteer 155>,
+						      <&a55_irqsteer 156>, <&a55_irqsteer 157>,
+						      <&a55_irqsteer 158>, <&a55_irqsteer 159>,
+						      <&a55_irqsteer 192>, <&a55_irqsteer 193>,
+						      <&a55_irqsteer 194>, <&a55_irqsteer 195>,
+						      <&a55_irqsteer 196>, <&a55_irqsteer 197>,
+						      <&a55_irqsteer 198>, <&a55_irqsteer 199>,
+						      <&a55_irqsteer 200>, <&a55_irqsteer 201>,
+						      <&a55_irqsteer 202>, <&a55_irqsteer 203>,
+						      <&a55_irqsteer 204>, <&a55_irqsteer 205>,
+						      <&a55_irqsteer 206>, <&a55_irqsteer 207>,
+						      <&a55_irqsteer 208>, <&a55_irqsteer 209>,
+						      <&a55_irqsteer 210>, <&a55_irqsteer 211>,
+						      <&a55_irqsteer 212>, <&a55_irqsteer 213>,
+						      <&a55_irqsteer 214>, <&a55_irqsteer 215>,
+						      <&a55_irqsteer 216>, <&a55_irqsteer 217>,
+						      <&a55_irqsteer 218>, <&a55_irqsteer 219>,
+						      <&a55_irqsteer 220>, <&a55_irqsteer 221>,
+						      <&a55_irqsteer 222>, <&a55_irqsteer 223>,
+						      <&gic GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		aips3: bus@42800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0 0x42800000 0 0x800000>;
+			ranges = <0x42800000 0x0 0x42800000 0x800000>,
+				 <0x28000000 0x0 0x28000000 0x1000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			usdhc1: mmc@42850000 {
+				compatible = "fsl,imx94-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42850000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX94_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_USDHC1>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <8>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@42860000 {
+				compatible = "fsl,imx94-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42860000 0x10000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX94_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_USDHC2>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <200000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@42880000 {
+				compatible = "fsl,imx94-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42880000 0x10000>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX94_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_USDHC3>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <200000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			lpuart9: serial@42a50000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42a50000 0x1000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART10>;
+				clock-names = "ipg";
+				dmas = <&edma2 51 0 FSL_EDMA_RX>, <&edma2 50 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart10: serial@42a60000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42a60000 0x1000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART10>;
+				clock-names = "ipg";
+				dmas = <&edma4 47 0 FSL_EDMA_RX>, <&edma4 46 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart11: serial@42a70000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42a70000 0x1000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART11>;
+				clock-names = "ipg";
+				dmas = <&edma2 53 0 FSL_EDMA_RX>, <&edma2 52 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart12: serial@42a80000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42a80000 0x1000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART12>;
+				clock-names = "ipg";
+				dmas = <&edma4 49 0 FSL_EDMA_RX>, <&edma4 48 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			mu12: mailbox@42ac0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42ac0000 0x10000>;
+				interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu13: mailbox@42ae0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42ae0000 0x10000>;
+				interrupts = <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu14: mailbox@42b00000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42b00000 0x10000>;
+				interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu15: mailbox@42b20000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42b20000 0x10000>;
+				interrupts = <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu16: mailbox@42b40000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42b40000 0x10000>;
+				interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu17: mailbox@42b60000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42b60000 0x10000>;
+				interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		gpio2: gpio@43810000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43810000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 4 32>;
+			ngpios = <32>;
+		};
+
+		gpio3: gpio@43820000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43820000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 36 26>;
+			ngpios = <26>;
+		};
+
+		gpio4: gpio@43840000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43840000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 62 4>, <&scmi_iomuxc 4 0 4>,
+				      <&scmi_iomuxc 8 140 12>, <&scmi_iomuxc 20 164 12>;
+			ngpios = <32>;
+		};
+
+		gpio5: gpio@43850000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43850000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 108 32>;
+			ngpios = <32>;
+		};
+
+		gpio6: gpio@43860000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43860000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 66 32>;
+			ngpios = <32>;
+		};
+
+		gpio7: gpio@43870000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43870000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 98 10>, <&scmi_iomuxc 16 152 12>;
+			gpio-reserved-ranges = <10 6>;
+			ngpios = <28>;
+		};
+
+		aips1: bus@44000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x44000000 0x0 0x800000>;
+			ranges = <0x44000000 0x0 0x44000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			edma1: dma-controller@44000000 {
+				compatible = "fsl,imx94-edma3", "fsl,imx93-edma3";
+				reg = <0x44000000 0x210000>;
+				interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "dma";
+				#dma-cells = <3>;
+				dma-channels = <32>;
+			};
+
+			mu1: mailbox@44220000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x44220000 0x10000>;
+				interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			system_counter: timer@44290000 {
+				compatible = "nxp,imx94-sysctr-timer", "nxp,imx95-sysctr-timer";
+				reg = <0x44290000 0x30000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+				nxp,no-divider;
+			};
+
+			tpm1: pwm@44310000 {
+				compatible = "fsl,imx94-pwm", "fsl,imx7ulp-pwm";
+				reg = <0x44310000 0x1000>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm2: pwm@44320000 {
+				compatible = "fsl,imx94-pwm", "fsl,imx7ulp-pwm";
+				reg = <0x44320000 0x1000>;
+				clocks = <&scmi_clk IMX94_CLK_TPM2>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i3c1: i3c@44330000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x44330000 0x10000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>,
+					 <&scmi_clk IMX94_CLK_I3C1SLOW>,
+					 <&dummy>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			lpi2c1: i2c@44340000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44340000 0x10000>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C1>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 12 0 0>, <&edma1 13 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c2: i2c@44350000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44350000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C2>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 14 0 0>, <&edma1 15 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi1: spi@44360000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x44360000 0x10000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI2>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 16 0 0>, <&edma1 17 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi2: spi@44370000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x44370000 0x10000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI2>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 18 0 0>, <&edma1 19 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart1: serial@44380000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x44380000 0x1000>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART1>;
+				clock-names = "ipg";
+				dmas = <&edma1 21 0 FSL_EDMA_RX>, <&edma1 20 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart2: serial@44390000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x44390000 0x1000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART2>;
+				clock-names = "ipg";
+				dmas = <&edma1 23 0 FSL_EDMA_RX>, <&edma1 22 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan1: can@443a0000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x443a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>,
+					 <&scmi_clk IMX94_CLK_CAN1>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN1>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			sai1: sai@443b0000 {
+				compatible = "fsl,imx94-sai", "fsl,imx95-sai";
+				reg = <0x443b0000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>, <&dummy>,
+					<&scmi_clk IMX94_CLK_SAI1>, <&dummy>,
+					<&dummy>, <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 25 0 FSL_EDMA_RX>, <&edma1 24 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			micfil: micfil@44520000 {
+				compatible = "fsl,imx943-micfil";
+				reg = <0x44520000 0x10000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>,
+					 <&scmi_clk IMX94_CLK_PDM>,
+					 <&scmi_clk IMX94_CLK_AUDIOPLL1>,
+					 <&scmi_clk IMX94_CLK_AUDIOPLL2>,
+					 <&dummy>;
+				clock-names = "ipg_clk", "ipg_clk_app",
+					      "pll8k", "pll11k", "clkext3";
+				dmas = <&edma1 6 0 (FSL_EDMA_MULTI_FIFO | FSL_EDMA_RX)>;
+				dma-names = "rx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			adc1: adc@44530000 {
+				compatible = "nxp,imx94-adc", "nxp,imx93-adc";
+				reg = <0x44530000 0x10000>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_ADC>;
+				clock-names = "ipg";
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			mu2: mailbox@445b0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x445b0000 0x1000>;
+				ranges;
+				interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#mbox-cells = <2>;
+
+				sram0: sram@445b1000 {
+					compatible = "mmio-sram";
+					reg = <0x445b1000 0x400>;
+					ranges = <0x0 0x445b1000 0x400>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					scmi_buf0: scmi-sram-section@0 {
+						compatible = "arm,scmi-shmem";
+						reg = <0x0 0x80>;
+					};
+
+					scmi_buf1: scmi-sram-section@80 {
+						compatible = "arm,scmi-shmem";
+						reg = <0x80 0x80>;
+					};
+				};
+			};
+
+			mu3: mailbox@445d0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x445d0000 0x10000>;
+				interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu4: mailbox@445f0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x445f0000 0x10000>;
+				interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu6: mailbox@44630000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x44630000 0x10000>;
+				interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			a55_irqsteer: interrupt-controller@446a0000 {
+				compatible = "fsl,imx94-irqsteer", "fsl,imx-irqsteer";
+				reg = <0x446a0000 0x1000>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "ipg";
+				fsl,channel = <0>;
+				fsl,num-irqs = <960>;
+			};
+		};
+
+		aips4: bus@49000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x49000000 0x0 0x800000>;
+			ranges = <0x49000000 0x0 0x49000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			wdog3: watchdog@49220000 {
+				compatible = "fsl,imx94-wdt", "fsl,imx93-wdt";
+				reg = <0x49220000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				timeout-sec = <40>;
+				fsl,ext-reset-output;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx943-evk.dts b/arch/arm64/boot/dts/freescale/imx943-evk.dts
new file mode 100644
index 000000000000..c8c3eff9df1a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx943-evk.dts
@@ -0,0 +1,627 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024-2025 NXP
+ */
+
+/dts-v1/;
+
+#include "imx943.dtsi"
+
+/ {
+	compatible = "fsl,imx943-evk", "fsl,imx94";
+	model = "NXP i.MX943 EVK board";
+
+	aliases {
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c5 = &lpi2c6;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+	};
+
+	bt_sco_codec: bt-sco-codec {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	dmic: dmic {
+		compatible = "dmic-codec";
+		#sound-dai-cells = <0>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_SD2_3V3";
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_audio_pwr: regulator-wm8962-pwr {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "audio-pwr";
+		gpio = <&pcal6416_i2c3_u171 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x7f000000>;
+			reusable;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,bitclock-master = <&btcpu>;
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,name = "bt-sco-audio";
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+
+		btcpu: simple-audio-card,cpu {
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+			sound-dai = <&sai3>;
+		};
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			format = "i2s";
+			link-name = "micfil hifi";
+
+			codec {
+				sound-dai = <&dmic>;
+			};
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		audio-codec = <&wm8962>;
+		audio-cpu = <&sai1>;
+		audio-routing = "Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC",
+			"IN1R", "AMIC";
+		hp-det-gpio = <&pcal6416_i2c3_u48 14 GPIO_ACTIVE_HIGH>;
+		model = "wm8962-audio";
+	};
+
+	memory@80000000 {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+		device_type = "memory";
+	};
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pca9670_i2c3: gpio@23 {
+		compatible = "nxp,pca9670";
+		reg = <0x23>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	pca9548_i2c3: i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wm8962: codec@1a {
+				compatible = "wlf,wm8962";
+				reg = <0x1a>;
+				clocks = <&scmi_clk IMX94_CLK_SAI1>;
+				AVDD-supply = <&reg_audio_pwr>;
+				CPVDD-supply = <&reg_audio_pwr>;
+				DBVDD-supply = <&reg_audio_pwr>;
+				DCVDD-supply = <&reg_audio_pwr>;
+				gpio-cfg = <
+					0x0000 /* 0:Default */
+					0x0000 /* 1:Default */
+					0x0000 /* 2:FN_DMICCLK */
+					0x0000 /* 3:Default */
+					0x0000 /* 4:FN_DMICCDAT */
+					0x0000 /* 5:Default */
+				>;
+				MICVDD-supply = <&reg_audio_pwr>;
+				PLLVDD-supply = <&reg_audio_pwr>;
+				SPKVDD1-supply = <&reg_audio_pwr>;
+				SPKVDD2-supply = <&reg_audio_pwr>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcal6416_i2c3_u46: gpio@20 {
+				compatible = "nxp,pcal6416";
+				reg = <0x20>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				sd-card-on-hog {
+					gpios = <13 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-high;
+				};
+			};
+
+			pcal6416_i2c3_u171: gpio@21 {
+				compatible = "nxp,pcal6416";
+				reg = <0x21>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				audio-pwren-hog {
+					gpios = <12 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-high;
+				};
+
+				mqs-mic-sel-hog {
+					gpios = <11 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-low;
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcal6416_i2c3_u48: gpio@20 {
+				compatible = "nxp,pcal6416";
+				reg = <0x20>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				interrupt-parent = <&gpio3>;
+				interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				pinctrl-0 = <&pinctrl_ioexpander_int>;
+				pinctrl-names = "default";
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcal6408_i2c3_u172: gpio@20 {
+				compatible = "nxp,pcal6408";
+				reg = <0x20>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				interrupt-parent = <&gpio3>;
+				/* shared int pin with u48 */
+				interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+	};
+};
+
+&lpi2c4 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lpi2c6 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c6>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pca9544_i2c6: i2c-mux@77 {
+		compatible = "nxp,pca9544";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcal6416_i2c6_u50: gpio@21 {
+				compatible = "nxp,pcal6416";
+				reg = <0x21>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcal6408_i2c6_u170: gpio@20 {
+				compatible = "nxp,pcal6408";
+				reg = <0x20>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				interrupt-parent = <&gpio4>;
+				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				pinctrl-0 = <&pinctrl_ioexpander_int2>;
+				pinctrl-names = "default";
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcal6416_i2c6_u44: gpio@20 {
+				compatible = "nxp,pcal6416";
+				reg = <0x20>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				/* pdm selection */
+				can-pdm-sel-hog {
+					gpios = <12 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-low;
+				};
+
+				sai3-sel-hog {
+					gpios = <11 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-high;
+				};
+
+				/* eMMC IOMUX selection */
+				sd1-sel-hog {
+					gpios = <0 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-high;
+				};
+
+				/* SD card IOMUX selection */
+				sd2-sel-hog {
+					gpios = <1 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-high;
+				};
+			};
+		};
+	};
+};
+
+&lpuart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&micfil {
+	assigned-clocks = <&scmi_clk IMX94_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX94_CLK_PDM>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX94_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <49152000>;
+	pinctrl-0 = <&pinctrl_pdm>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sai1 {
+	assigned-clocks = <&scmi_clk IMX94_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX94_CLK_SAI1>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX94_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+	pinctrl-0 = <&pinctrl_sai1>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai3 {
+	assigned-clocks = <&scmi_clk IMX94_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX94_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX94_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+	pinctrl-0 = <&pinctrl_sai3>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&scmi_iomuxc {
+
+	pinctrl_ioexpander_int2: ioexpanderint2grp {
+		fsl,pins = <
+			IMX94_PAD_CCM_CLKO4__GPIO4_IO3		0x31e
+		>;
+	};
+
+	pinctrl_ioexpander_int: ioexpanderintgrp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO45__GPIO3_IO13		0x31e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO16__LPI2C3_SDA		0x40000b9e
+			IMX94_PAD_GPIO_IO17__LPI2C3_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO18__LPI2C4_SDA		0x40000b9e
+			IMX94_PAD_GPIO_IO19__LPI2C4_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c6: lpi2c6grp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO29__LPI2C6_SDA		0x40000b9e
+			IMX94_PAD_GPIO_IO28__LPI2C6_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			IMX94_PAD_PDM_CLK__PDM_CLK			0x31e
+			IMX94_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0	0x31e
+			IMX94_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1	0x31e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			IMX94_PAD_SAI1_TXFS__SAI1_TX_SYNC	0x31e
+			IMX94_PAD_SAI1_TXC__SAI1_TX_BCLK	0x31e
+			IMX94_PAD_SAI1_TXD0__SAI1_TX_DATA0	0x31e
+			IMX94_PAD_SAI1_RXD0__SAI1_RX_DATA0	0x31e
+			IMX94_PAD_I2C2_SDA__SAI1_MCLK		0x31e
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO42__SAI3_TX_BCLK	0x31e
+			IMX94_PAD_GPIO_IO56__SAI3_TX_SYNC	0x31e
+			IMX94_PAD_GPIO_IO46__SAI3_RX_DATA0	0x31e
+			IMX94_PAD_GPIO_IO47__SAI3_TX_DATA0	0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			IMX94_PAD_UART1_TXD__LPUART1_TX		0x31e
+			IMX94_PAD_UART1_RXD__LPUART1_RX		0x31e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX94_PAD_SD1_CLK__USDHC1_CLK		0x158e
+			IMX94_PAD_SD1_CMD__USDHC1_CMD		0x138e
+			IMX94_PAD_SD1_DATA0__USDHC1_DATA0	0x138e
+			IMX94_PAD_SD1_DATA1__USDHC1_DATA1	0x138e
+			IMX94_PAD_SD1_DATA2__USDHC1_DATA2	0x138e
+			IMX94_PAD_SD1_DATA3__USDHC1_DATA3	0x138e
+			IMX94_PAD_SD1_DATA4__USDHC1_DATA4	0x138e
+			IMX94_PAD_SD1_DATA5__USDHC1_DATA5	0x138e
+			IMX94_PAD_SD1_DATA6__USDHC1_DATA6	0x138e
+			IMX94_PAD_SD1_DATA7__USDHC1_DATA7	0x138e
+			IMX94_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX94_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			IMX94_PAD_SD1_CMD__USDHC1_CMD		0x13fe
+			IMX94_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
+			IMX94_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
+			IMX94_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
+			IMX94_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
+			IMX94_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
+			IMX94_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
+			IMX94_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
+			IMX94_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			IMX94_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX94_PAD_SD1_CLK__USDHC1_CLK		0x158e
+			IMX94_PAD_SD1_CMD__USDHC1_CMD		0x138e
+			IMX94_PAD_SD1_DATA0__USDHC1_DATA0	0x138e
+			IMX94_PAD_SD1_DATA1__USDHC1_DATA1	0x138e
+			IMX94_PAD_SD1_DATA2__USDHC1_DATA2	0x138e
+			IMX94_PAD_SD1_DATA3__USDHC1_DATA3	0x138e
+			IMX94_PAD_SD1_DATA4__USDHC1_DATA4	0x138e
+			IMX94_PAD_SD1_DATA5__USDHC1_DATA5	0x138e
+			IMX94_PAD_SD1_DATA6__USDHC1_DATA6	0x138e
+			IMX94_PAD_SD1_DATA7__USDHC1_DATA7	0x138e
+			IMX94_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			IMX94_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			IMX94_PAD_SD2_CMD__USDHC2_CMD		0x138e
+			IMX94_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
+			IMX94_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
+			IMX94_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
+			IMX94_PAD_SD2_DATA3__USDHC2_DATA3	0x138e
+			IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			IMX94_PAD_SD2_CLK__USDHC2_CLK		0x15fe
+			IMX94_PAD_SD2_CMD__USDHC2_CMD		0x13fe
+			IMX94_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
+			IMX94_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
+			IMX94_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
+			IMX94_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
+			IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX94_PAD_SD2_CD_B__GPIO4_IO20		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX94_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			IMX94_PAD_SD2_CMD__USDHC2_CMD		0x138e
+			IMX94_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
+			IMX94_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
+			IMX94_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
+			IMX94_PAD_SD2_DATA3__USDHC2_DATA3	0x138e
+			IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: usdhc2regvmmcgrp {
+		fsl,pins = <
+			IMX94_PAD_SD2_RESET_B__GPIO4_IO27	0x31e
+		>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	bus-width = <4>;
+	no-mmc;
+	no-sdio;
+	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&wdog3 {
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx943.dtsi b/arch/arm64/boot/dts/freescale/imx943.dtsi
new file mode 100644
index 000000000000..45b8da758e87
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx943.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+#include "imx94.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+				wakeup-latency-us = <1500>;
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x0>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX94_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l0>;
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x100>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX94_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l1>;
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x200>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX94_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l2>;
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x300>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX94_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l3>;
+		};
+
+		l2_cache_l0: l2-cache-l0 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l1: l2-cache-l1 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l2: l2-cache-l2 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l3: l2-cache-l3 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l3_cache: l3-cache {
+			compatible = "cache";
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <3>;
+			cache-unified;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
new file mode 100644
index 000000000000..148243470dd4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
@@ -0,0 +1,1182 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/i3c/i3c.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx95.dtsi"
+
+#define FALLING_EDGE		BIT(0)
+#define RISING_EDGE		BIT(1)
+
+#define BRD_SM_CTRL_SD3_WAKE		0x8000
+#define BRD_SM_CTRL_PCIE1_WAKE		0x8001
+#define BRD_SM_CTRL_BT_WAKE		0x8002
+#define BRD_SM_CTRL_PCIE2_WAKE		0x8003
+#define BRD_SM_CTRL_BUTTON		0x8004
+
+/ {
+	compatible = "fsl,imx95-15x15-evk", "fsl,imx95";
+	model = "NXP i.MX95 15X15 board";
+
+	aliases {
+		ethernet0 = &enetc_port0;
+		ethernet1 = &enetc_port1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		i2c5 = &lpi2c6;
+		i2c6 = &lpi2c7;
+		i2c7 = &lpi2c8;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &lpuart1;
+		serial4 = &lpuart5;
+	};
+
+	bt_sco_codec: bt-sco-codec {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		stdout-path = &lpuart1;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		cooling-levels = <64 128 192 255>;
+		pwms = <&tpm6 0 4000000 PWM_POLARITY_INVERTED>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+V1.8_SW";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SW";
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vref_1v8";
+	};
+
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "audio-pwr";
+		gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_audio_switch1: regulator-audio-switch1 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "audio-switch1";
+		gpio = <&pcal6524 0 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can2-stby";
+		gpio = <&pcal6524 14 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_m2_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "M.2-power";
+		gpio = <&pcal6524 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_SD2_3V3";
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc3_vmmc: regulator-usdhc3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "WLAN_EN";
+		vin-supply = <&reg_m2_pwr>;
+		gpio = <&pcal6524 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * IW612 wifi chip needs more delay than other wifi chips to complete
+		 * the host interface initialization after power up, otherwise the
+		 * internal state of IW612 may be unstable, resulting in the failure of
+		 * the SDIO3.0 switch voltage.
+		 */
+		startup-delay-us = <20000>;
+	};
+
+	reg_usb_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pcal6524 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vcc_12v: regulator-vcc-12v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "VCC_12V";
+		gpio = <&pcal6524 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux_cma: linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x7F000000>;
+			reusable;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+		};
+
+		vdev0vring0: vdev0vring0@88000000 {
+			reg = <0 0x88000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@88008000 {
+			reg = <0 0x88008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@88010000 {
+			reg = <0 0x88010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@88018000 {
+			reg = <0 0x88018000 0 0x8000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@88020000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x88020000 0 0x100000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@88220000 {
+			reg = <0 0x88220000 0 0x1000>;
+			no-map;
+		};
+
+		vpu_boot: vpu_boot@a0000000 {
+			reg = <0 0xa0000000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,bitclock-master = <&btcpu>;
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,name = "bt-sco-audio";
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+
+		btcpu: simple-audio-card,cpu {
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+			sound-dai = <&sai1>;
+		};
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			format = "i2s";
+			link-name = "micfil hifi";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		audio-codec = <&wm8962>;
+		audio-cpu = <&sai3>;
+		audio-routing = "Headphone Jack", "HPOUTL", "Headphone Jack", "HPOUTR",
+				"Ext Spk", "SPKOUTL", "Ext Spk", "SPKOUTR", "AMIC", "MICBIAS",
+				"IN3R", "AMIC", "IN1R", "AMIC";
+		hp-det-gpio = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+		model = "wm8962-audio";
+		pinctrl-0 = <&pinctrl_hp>;
+		pinctrl-names = "default";
+	};
+
+	sound-xcvr {
+		compatible = "fsl,imx-audio-card";
+		model = "imx-audio-xcvr";
+
+		pri-dai-link {
+			link-name = "XCVR PCM";
+
+			cpu {
+				sound-dai = <&xcvr>;
+			};
+		};
+	};
+
+	usdhc3_pwrseq: usdhc3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-0 = <&pinctrl_usdhc3_pwrseq>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	};
+
+	memory@80000000 {
+		reg = <0x0 0x80000000 0 0x80000000>;
+		device_type = "memory";
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&enetc_port0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_enetc0>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&enetc_port1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_enetc1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
+&i3c2 {
+	i2c-scl-hz = <400000>;
+	pinctrl-0 = <&pinctrl_i3c2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pca9570: gpio@24 {
+		compatible = "nxp,pca9570";
+		reg = <0x24 0 (I2C_FILTER)>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "OUT1", "OUT2", "OUT3", "OUT4";
+	};
+};
+
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	wm8962: codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&scmi_clk IMX95_CLK_SAI3>;
+		AVDD-supply = <&reg_audio_pwr>;
+		CPVDD-supply = <&reg_audio_pwr>;
+		DBVDD-supply = <&reg_audio_pwr>;
+		DCVDD-supply = <&reg_audio_pwr>;
+		gpio-cfg = <
+			0x0000
+			0x0000
+			0x0000
+			0x0000
+			0x0000
+			0x0000
+		>;
+		MICVDD-supply = <&reg_audio_pwr>;
+		PLLVDD-supply = <&reg_audio_pwr>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+		SPKVDD2-supply = <&reg_audio_pwr>;
+	};
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio5>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		pinctrl-names = "default";
+	};
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pinctrl_ptn5110>;
+		pinctrl-names = "default";
+
+		typec_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <15000000>;
+			power-role = "dual";
+			self-powered;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_con_hs: endpoint {
+						remote-endpoint = <&usb3_data_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	pca9632: led-controller@62 {
+		compatible = "nxp,pca9632";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		nxp,inverted-out;
+
+		led_backlight0: led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_BACKLIGHT;
+			function-enumerator = <0>;
+		};
+
+		led_backlight1: led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_BACKLIGHT;
+			function-enumerator = <1>;
+		};
+	};
+};
+
+&lpi2c4 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lpi2c6 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_lpi2c6>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lpuart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lpuart5 {
+	pinctrl-0 = <&pinctrl_uart5>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&micfil {
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_PDM>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>, <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>, <3612672000>, <393216000>, <361267200>, <49152000>;
+	#sound-dai-cells = <0>;
+	pinctrl-0 = <&pinctrl_pdm>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mu7 {
+	status = "okay";
+};
+
+&netc_blk_ctrl {
+	status = "okay";
+};
+
+&netc_bus0 {
+	msi-map = <0x00 &its 0x60 0x1>,	//ENETC0 PF
+		  <0x10 &its 0x61 0x1>, //ENETC0 VF0
+		  <0x20 &its 0x62 0x1>, //ENETC0 VF1
+		  <0x40 &its 0x63 0x1>, //ENETC1 PF
+		  <0x50 &its 0x65 0x1>, //ENETC1 VF0
+		  <0x60 &its 0x66 0x1>, //ENETC1 VF1
+		  <0x80 &its 0x64 0x1>, //ENETC2 PF
+		  <0xc0 &its 0x67 0x1>;
+	iommu-map = <0x0 &smmu 0x20 0x1>,
+		    <0x10 &smmu 0x21 0x1>,
+		    <0x20 &smmu 0x22 0x1>,
+		    <0x40 &smmu 0x23 0x1>,
+		    <0x50 &smmu 0x25 0x1>,
+		    <0x60 &smmu 0x26 0x1>,
+		    <0x80 &smmu 0x24 0x1>,
+		    <0xc0 &smmu 0x27 0x1>;
+};
+
+&netc_emdio {
+	pinctrl-0 = <&pinctrl_emdio>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&pcal6524 4 GPIO_ACTIVE_LOW>;
+		realtek,clkout-disable;
+	};
+
+	ethphy1: ethernet-phy@2 {
+		reg = <2>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&pcal6524 5 GPIO_ACTIVE_LOW>;
+		realtek,clkout-disable;
+	};
+};
+
+&netc_timer {
+	status = "okay";
+};
+
+&netcmix_blk_ctrl {
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	reset-gpio = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_m2_pwr>;
+	status = "okay";
+};
+
+&pcie0_ep {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	vpcie-supply = <&reg_m2_pwr>;
+	status = "disabled";
+};
+
+&sai1 {
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI1>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>, <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>, <3612672000>, <393216000>, <361267200>, <12288000>;
+	#sound-dai-cells = <0>;
+	pinctrl-0 = <&pinctrl_sai1>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai3 {
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>, <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>, <3612672000>, <393216000>, <361267200>, <12288000>;
+	#sound-dai-cells = <0>;
+	pinctrl-0 = <&pinctrl_sai3>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&scmi_iomuxc {
+	pinctrl_emdio: emdiogrp {
+		fsl,pins = <
+			IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC		0x50e
+			IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO		0x90e
+		>;
+	};
+
+	pinctrl_enetc0: enetc0grp {
+		fsl,pins = <
+			IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x50e
+			IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x50e
+			IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x50e
+			IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x50e
+			IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x57e
+			IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK	0x58e
+			IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x57e
+			IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK	0x58e
+			IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0		0x57e
+			IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1		0x57e
+			IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2		0x57e
+			IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3		0x57e
+		>;
+	};
+
+	pinctrl_enetc1: enetc1grp {
+		fsl,pins = <
+			IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3		0x50e
+			IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2		0x50e
+			IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1		0x50e
+			IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0		0x50e
+			IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL	0x57e
+			IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK	0x58e
+			IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL	0x57e
+			IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK	0x58e
+			IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0		0x57e
+			IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1		0x57e
+			IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2		0x57e
+			IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3		0x57e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO25__CAN2_TX				0x39e
+			IMX95_PAD_GPIO_IO27__CAN2_RX				0x39e
+		>;
+	};
+
+	pinctrl_hp: hpgrp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO21__GPIO2_IO_BIT21			0x31e
+		>;
+	};
+
+	pinctrl_i3c2: i3c2grp {
+		fsl,pins = <
+			IMX95_PAD_ENET1_MDC__I3C2_SCL				0x40000186
+			IMX95_PAD_ENET1_MDIO__I3C2_SDA				0x40000186
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL		0x40000b9e
+			IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL		0x40000b9e
+			IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO28__LPI2C3_SDA				0x40000b9e
+			IMX95_PAD_GPIO_IO29__LPI2C3_SCL				0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO30__LPI2C4_SDA				0x40000b9e
+			IMX95_PAD_GPIO_IO31__LPI2C4_SCL				0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c6: lpi2c6grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO02__LPI2C6_SDA				0x40000b9e
+			IMX95_PAD_GPIO_IO03__LPI2C6_SCL				0x40000b9e
+		>;
+	};
+
+	pinctrl_mipi_dsi_csi: mipidsigrp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_DATA6__GPIO5_IO_BIT6			0x31e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14			0x31e
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B		0x40000b1e
+			IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13			0x31e
+		>;
+	};
+
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK				0x31e
+			IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0	0x31e
+		>;
+	};
+
+	pinctrl_ptn5110: ptn5110grp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11			0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7			0x31e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_RX_DATA_BIT0	0x31e
+			IMX95_PAD_SAI1_TXC__AONMIX_TOP_SAI1_TX_BCLK		0x31e
+			IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_SYNC		0x31e
+			IMX95_PAD_SAI1_TXD0__AONMIX_TOP_SAI1_TX_DATA_BIT0	0x31e
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_SAI2_RX_BCLK		0x31e
+			IMX95_PAD_ENET2_MDC__NETCMIX_TOP_SAI2_RX_SYNC		0x31e
+			IMX95_PAD_ENET2_TD3__NETCMIX_TOP_SAI2_RX_DATA_BIT0	0x31e
+			IMX95_PAD_ENET2_TD2__NETCMIX_TOP_SAI2_RX_DATA_BIT1	0x31e
+			IMX95_PAD_ENET2_TXC__NETCMIX_TOP_SAI2_TX_BCLK		0x31e
+			IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_SAI2_TX_SYNC	0x31e
+			IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_SAI2_TX_DATA_BIT0	0x31e
+			IMX95_PAD_ENET2_RXC__NETCMIX_TOP_SAI2_TX_DATA_BIT1	0x31e
+			IMX95_PAD_ENET2_RD0__NETCMIX_TOP_SAI2_TX_DATA_BIT2	0x31e
+			IMX95_PAD_ENET2_RD1__NETCMIX_TOP_SAI2_TX_DATA_BIT3	0x31e
+			IMX95_PAD_ENET2_RD2__NETCMIX_TOP_SAI2_MCLK		0x31e
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO17__SAI3_MCLK				0x31e
+			IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK			0x31e
+			IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC			0x31e
+			IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0			0x31e
+			IMX95_PAD_GPIO_IO19__SAI3_TX_DATA_BIT0			0x31e
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO22__SPDIF_IN				0x3fe
+			IMX95_PAD_GPIO_IO23__SPDIF_OUT				0x3fe
+		>;
+	};
+
+	pinctrl_tpm3: tpm3grp {
+		fsl,pins = <
+			IMX95_PAD_CCM_CLKO2__GPIO3_IO_BIT27			0x51e
+		>;
+	};
+
+	pinctrl_tpm6: tpm6grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO08__TPM6_CH0				0x51e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX		0x31e
+			IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX		0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			IMX95_PAD_DAP_TDO_TRACESWO__LPUART5_TX			0x31e
+			IMX95_PAD_DAP_TDI__LPUART5_RX				0x31e
+			IMX95_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B			0x31e
+			IMX95_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B			0x31e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK				0x158e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD				0x138e
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0			0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1			0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2			0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3			0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4			0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5			0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6			0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7			0x138e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE			0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK				0x158e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD				0x138e
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0			0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1			0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2			0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3			0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4			0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5			0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6			0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7			0x138e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE			0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK				0x15fe
+			IMX95_PAD_SD1_CMD__USDHC1_CMD				0x13fe
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0			0x13fe
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1			0x13fe
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2			0x13fe
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3			0x13fe
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4			0x13fe
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5			0x13fe
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6			0x13fe
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7			0x13fe
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE			0x15fe
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0			0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK				0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD				0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT			0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK				0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD				0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT			0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK				0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD				0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT			0x51e
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			IMX95_PAD_SD3_CLK__USDHC3_CLK				0x158e
+			IMX95_PAD_SD3_CMD__USDHC3_CMD				0x138e
+			IMX95_PAD_SD3_DATA0__USDHC3_DATA0			0x138e
+			IMX95_PAD_SD3_DATA1__USDHC3_DATA1			0x138e
+			IMX95_PAD_SD3_DATA2__USDHC3_DATA2			0x138e
+			IMX95_PAD_SD3_DATA3__USDHC3_DATA3			0x138e
+		>;
+	};
+
+	pinctrl_usdhc3_pwrseq: usdhc3pwrseqgrp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_SCLK__GPIO5_IO_BIT9			0x31e
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD3_CLK__USDHC3_CLK				0x158e
+			IMX95_PAD_SD3_CMD__USDHC3_CMD				0x138e
+			IMX95_PAD_SD3_DATA0__USDHC3_DATA0			0x138e
+			IMX95_PAD_SD3_DATA1__USDHC3_DATA1			0x138e
+			IMX95_PAD_SD3_DATA2__USDHC3_DATA2			0x138e
+			IMX95_PAD_SD3_DATA3__USDHC3_DATA3			0x138e
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD3_CLK__USDHC3_CLK				0x15fe
+			IMX95_PAD_SD3_CMD__USDHC3_CMD				0x13fe
+			IMX95_PAD_SD3_DATA0__USDHC3_DATA0			0x13fe
+			IMX95_PAD_SD3_DATA1__USDHC3_DATA1			0x13fe
+			IMX95_PAD_SD3_DATA2__USDHC3_DATA2			0x13fe
+			IMX95_PAD_SD3_DATA3__USDHC3_DATA3			0x13fe
+		>;
+	};
+};
+
+&scmi_misc {
+	nxp,ctrl-ids = <BRD_SM_CTRL_SD3_WAKE		1>,
+		       <BRD_SM_CTRL_PCIE1_WAKE		1>,
+		       <BRD_SM_CTRL_BT_WAKE		1>,
+		       <BRD_SM_CTRL_PCIE2_WAKE		1>,
+		       <BRD_SM_CTRL_BUTTON		1>;
+};
+
+&thermal_zones {
+	a55-thermal {
+		cooling-maps {
+			map1 {
+				cooling-device = <&fan0 0 1>;
+				trip = <&atrip2>;
+			};
+
+			map2 {
+				cooling-device = <&fan0 1 2>;
+				trip = <&atrip3>;
+			};
+
+			map3 {
+				cooling-device = <&fan0 2 3>;
+				trip = <&atrip4>;
+			};
+		};
+
+		trips {
+			atrip2: trip2 {
+				hysteresis = <2000>;
+				temperature = <55000>;
+				type = "active";
+			};
+
+			atrip3: trip3 {
+				hysteresis = <2000>;
+				temperature = <65000>;
+				type = "active";
+			};
+
+			atrip4: trip4 {
+				hysteresis = <2000>;
+				temperature = <75000>;
+				type = "active";
+			};
+		};
+	};
+
+	pf09-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 2>;
+
+		trips {
+			pf09_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf09_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53arm-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 4>;
+
+		cooling-maps {
+			map0 {
+				cooling-device = <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				trip = <&pf5301_alert>;
+			};
+		};
+
+		trips {
+			pf5301_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5301_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53soc-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 3>;
+
+		trips {
+			pf5302_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5302_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+};
+
+&tpm3 {
+	pinctrl-0 = <&pinctrl_tpm3>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tpm6 {
+	pinctrl-0 = <&pinctrl_tpm6>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	role-switch-default-mode = "peripheral";
+	srp-disable;
+	usb-role-switch;
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+	status = "okay";
+
+	port {
+		usb3_data_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usb3_phy {
+	orientation-switch;
+	fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <17>;
+	fsl,phy-pcs-tx-swing-full-percent = <100>;
+	fsl,phy-tx-preemp-amp-tune-microamp = <600>;
+	fsl,phy-tx-vboost-level-microvolt = <1156>;
+	fsl,phy-tx-vref-tune-percent = <100>;
+	status = "okay";
+
+	port {
+		usb3_data_ss: endpoint {
+			remote-endpoint = <&typec_con_ss>;
+		};
+	};
+};
+
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	fsl,tuning-step = <1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	fsl,tuning-step = <1>;
+	status = "okay";
+};
+
+&usdhc3 {
+	bus-width = <4>;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	vmmc-supply = <&reg_usdhc3_vmmc>;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog3 {
+	status = "okay";
+};
+
+&xcvr {
+	clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+		 <&scmi_clk IMX95_CLK_SPDIF>,
+		 <&dummy>,
+		 <&scmi_clk IMX95_CLK_AUDIOXCVR>,
+		 <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+		 <&scmi_clk IMX95_CLK_AUDIOPLL2>;
+	clock-names = "ipg", "phy", "spba", "pll_ipg", "pll8k", "pll11k";
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SPDIF>,
+			  <&scmi_clk IMX95_CLK_AUDIOXCVR>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+				 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+	assigned-clock-rates = <3932160000>, <3612672000>,
+			       <393216000>, <361267200>,
+			       <12288000>, <0>;
+	#sound-dai-cells = <0>;
+	pinctrl-0 = <&pinctrl_spdif>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk-sof.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk-sof.dts
new file mode 100644
index 000000000000..808a9fe3ebb2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk-sof.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+
+#include "imx95-19x19-evk.dts"
+
+/ {
+	sof_cpu: cm7-cpu@80000000 {
+		compatible = "fsl,imx95-cm7-sof";
+		reg = <0x0 0x80000000 0x0 0x6100000>;
+		reg-names = "sram";
+		memory-region = <&adma_res>;
+		memory-region-names = "dma";
+		mboxes = <&mu7 2 0>, <&mu7 2 1>, <&mu7 3 0>, <&mu7 3 1>;
+		mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
+
+		sai3_cpu: port {
+			sai3_cpu_ep: endpoint {
+				remote-endpoint = <&wm8962_ep>;
+			};
+		};
+	};
+
+	reserved-memory {
+		adma_res: memory@86100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x86100000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	sof-sound {
+		compatible = "audio-graph-card2";
+		links = <&sai3_cpu>;
+		label = "audio";
+		hp-det-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		widgets = "Headphone", "Headphones",
+			  "Microphone", "Headset Mic";
+		routing = "Headphones", "HPOUTL",
+			  "Headphones", "HPOUTR",
+			  "Headset Mic", "MICBIAS",
+			  "IN3R", "Headset Mic",
+			  "IN1R", "Headset Mic";
+	};
+
+	sound-wm8962 {
+		status = "disabled";
+	};
+
+};
+
+&edma2 {
+	/* channels 30 and 31 reserved for FW usage */
+	dma-channel-mask = <0xc0000000>, <0x0>;
+};
+
+&sai3 {
+	status = "disabled";
+};
+
+&wm8962 {
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>, <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>, <3612672000>,
+			       <393216000>, <361267200>,
+			       <12288000>;
+
+	port {
+		wm8962_ep: endpoint {
+			bitclock-master;
+			frame-master;
+			remote-endpoint = <&sai3_cpu_ep>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
new file mode 100644
index 000000000000..9f968feccef6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -0,0 +1,1141 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx95.dtsi"
+
+#define FALLING_EDGE			1
+#define RISING_EDGE			2
+
+#define BRD_SM_CTRL_SD3_WAKE		0x8000	/* PCAL6408A-0 */
+#define BRD_SM_CTRL_PCIE1_WAKE		0x8001	/* PCAL6408A-4 */
+#define BRD_SM_CTRL_BT_WAKE		0x8002	/* PCAL6408A-5 */
+#define BRD_SM_CTRL_PCIE2_WAKE		0x8003	/* PCAL6408A-6 */
+#define BRD_SM_CTRL_BUTTON		0x8004	/* PCAL6408A-7 */
+
+/ {
+	model = "NXP i.MX95 19X19 board";
+	compatible = "fsl,imx95-19x19-evk", "fsl,imx95";
+
+	aliases {
+		ethernet0 = &enetc_port0;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		i2c5 = &lpi2c6;
+		i2c6 = &lpi2c7;
+		i2c7 = &lpi2c8;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+		serial4 = &lpuart5;
+	};
+
+	bt_sco_codec: audio-codec-bt-sco {
+		#sound-dai-cells = <1>;
+		compatible = "linux,bt-sco";
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		pwms = <&tpm6 2 4000000 PWM_POLARITY_INVERTED>;
+		cooling-levels = <64 128 192 255>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux_cma: linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x7f000000>;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	flexcan1_phy: can-phy0 {
+		compatible = "nxp,tjr1443";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		enable-gpios = <&i2c6_pcal6416 6 GPIO_ACTIVE_HIGH>;
+		standby-gpios = <&i2c6_pcal6416 5 GPIO_ACTIVE_LOW>;
+	};
+
+	flexcan2_phy: can-phy1 {
+		compatible = "nxp,tjr1443";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		enable-gpios = <&i2c4_gpio_expander_21 4 GPIO_ACTIVE_HIGH>;
+		standby-gpios = <&i2c4_gpio_expander_21 3 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_vref_1v8: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+V1.8_SW";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SW";
+	};
+
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&i2c4_gpio_expander_21 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_audio_slot: regulator-audio-slot {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-wm8962";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&i2c4_gpio_expander_21 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		status = "disabled";
+	};
+
+	reg_m2_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "M.2-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&i2c7_pcal6524 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * M.2 device only can be enabled(W_DISABLE1#) after all Power
+		 * Rails reach their minimum operating voltage (PCI Express M.2
+		 * Specification r5.1 3.1.4 Power-up Timing).
+		 * Set a delay equal to the max value of Tsettle here.
+		 */
+		startup-delay-us = <5000>;
+	};
+
+	reg_pcie0: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIE_WLAN_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_m2_pwr>;
+		gpio = <&i2c7_pcal6524 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_slot_pwr: regulator-slot-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIe slot-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&i2c7_pcal6524 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VDD_SD2_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <12000>;
+	};
+
+	reg_usb_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&i2c7_pcal6524 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			link-name = "micfil hifi";
+			format = "i2s";
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		model = "wm8962-audio";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8962>;
+		hp-det-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		audio-routing = "Headphone Jack", "HPOUTL",
+				"Headphone Jack", "HPOUTR",
+				"Ext Spk", "SPKOUTL",
+				"Ext Spk", "SPKOUTR",
+				"AMIC", "MICBIAS",
+				"IN3R", "AMIC",
+				"IN1R", "AMIC";
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&enetc_port0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enetc0>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	phys = <&flexcan1_phy>;
+	status = "disabled";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	phys = <&flexcan2_phy>;
+	status = "okay";
+};
+
+&flexspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexspi1_reset>;
+		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <200000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	adp5585: io-expander@34 {
+		compatible = "adi,adp5585-00", "adi,adp5585";
+		reg = <0x34>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-reserved-ranges = <5 1>;
+		#pwm-cells = <3>;
+	};
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	i2c3_gpio_expander_20: gpio@20 {
+		compatible = "nxp,pcal6408";
+		#gpio-cells = <2>;
+		gpio-controller;
+		reg = <0x20>;
+		vcc-supply = <&reg_3p3v>;
+	};
+
+	pca9632: pca9632@62 {
+		compatible = "nxp,pca9632";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led_baclklight: led@0 {
+			reg = <0>;
+			label = "backlight";
+			linux,default-trigger = "none";
+		};
+	};
+};
+
+&lpi2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c4>;
+	status = "okay";
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&scmi_clk IMX95_CLK_SAI3>;
+		DCVDD-supply = <&reg_audio_pwr>;
+		DBVDD-supply = <&reg_audio_pwr>;
+		AVDD-supply = <&reg_audio_pwr>;
+		CPVDD-supply = <&reg_audio_pwr>;
+		MICVDD-supply = <&reg_audio_pwr>;
+		PLLVDD-supply = <&reg_audio_pwr>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+		SPKVDD2-supply = <&reg_audio_pwr>;
+		gpio-cfg = < 0x0000 /* 0:Default */
+			     0x0000 /* 1:Default */
+			     0x0000 /* 2:FN_DMICCLK */
+			     0x0000 /* 3:Default */
+			     0x0000 /* 4:FN_DMICCDAT */
+			     0x0000 /* 5:Default */
+			   >;
+	};
+
+	i2c4_gpio_expander_21: gpio@21 {
+		compatible = "nxp,pcal6408";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_pcal6408>;
+		vcc-supply = <&reg_3p3v>;
+	};
+};
+
+&lpi2c5 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	status = "okay";
+
+	i2c5_pcal6408: gpio@21 {
+		compatible = "nxp,pcal6408";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3p3v>;
+	};
+};
+
+&lpi2c6 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c6>;
+	status = "okay";
+
+	i2c6_pcal6416: gpio@21 {
+		compatible = "nxp,pcal6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6416>;
+		vcc-supply = <&reg_3p3v>;
+	};
+};
+
+&lpi2c7 {
+	clock-frequency = <1000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c7>;
+	status = "okay";
+
+	i2c7_pcal6524: i2c7-gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_pcal6524>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+		typec_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 0, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <0>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_con_hs: endpoint {
+						remote-endpoint = <&usb3_data_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&lpuart1 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "disabled";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&lpspi7 {
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi7>;
+	cs-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&micfil {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_PDM>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <49152000>;
+	status = "okay";
+};
+
+&mu7 {
+	status = "okay";
+};
+
+&netcmix_blk_ctrl {
+	status = "okay";
+};
+
+&netc_blk_ctrl {
+	status = "okay";
+};
+
+&netc_emdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_emdio>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&i2c5_pcal6408 2 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		realtek,clkout-disable;
+	};
+};
+
+&netc_timer {
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	reset-gpio = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie0>;
+	status = "okay";
+};
+
+&pcie0_ep {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	vpcie-supply = <&reg_pcie0>;
+	status = "disabled";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	reset-gpio = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_slot_pwr>;
+	status = "okay";
+};
+
+&pcie1_ep {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	vpcie-supply = <&reg_slot_pwr>;
+	status = "disabled";
+};
+
+&sai1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI1>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&tpm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm3>;
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	disable-over-current;
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+	status = "okay";
+
+	port {
+		usb3_data_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usb3_phy {
+	fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <17>;
+	fsl,phy-pcs-tx-swing-full-percent = <100>;
+	fsl,phy-tx-preemp-amp-tune-microamp = <600>;
+	fsl,phy-tx-vboost-level-microvolt = <1156>;
+	fsl,phy-tx-vref-tune-percent = <100>;
+	orientation-switch;
+	status = "okay";
+
+	port {
+		usb3_data_ss: endpoint {
+			remote-endpoint = <&typec_con_ss>;
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&scmi_misc {
+	nxp,ctrl-ids = <BRD_SM_CTRL_SD3_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_PCIE1_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_BT_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_PCIE2_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_BUTTON	FALLING_EDGE>;
+};
+
+&wdog3 {
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&scmi_iomuxc {
+	pinctrl_emdio: emdiogrp {
+		fsl,pins = <
+			IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC		0x50e
+			IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO		0x90e
+		>;
+	};
+
+	pinctrl_enetc0: enetc0grp {
+		fsl,pins = <
+			IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x50e
+			IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x50e
+			IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x50e
+			IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x50e
+			IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x57e
+			IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK	0x58e
+			IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x57e
+			IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK	0x58e
+			IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0		0x57e
+			IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1		0x57e
+			IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2		0x57e
+			IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3		0x57e
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX			0x39e
+			IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX		0x39e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO25__CAN2_TX				0x39e
+			IMX95_PAD_GPIO_IO27__CAN2_RX				0x39e
+		>;
+	};
+
+	pinctrl_flexspi1: flexspi1grp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B			0x3fe
+			IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK			0x3fe
+			IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS			0x3fe
+			IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0		0x3fe
+			IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1		0x3fe
+			IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2		0x3fe
+			IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3		0x3fe
+			IMX95_PAD_XSPI1_DATA4__FLEXSPI1_A_DATA_BIT4		0x3fe
+			IMX95_PAD_XSPI1_DATA5__FLEXSPI1_A_DATA_BIT5		0x3fe
+			IMX95_PAD_XSPI1_DATA6__FLEXSPI1_A_DATA_BIT6		0x3fe
+			IMX95_PAD_XSPI1_DATA7__FLEXSPI1_A_DATA_BIT7		0x3fe
+		>;
+	};
+
+	pinctrl_flexspi1_reset: flexspi1-reset-grp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11			0x3fe
+		>;
+	};
+
+	pinctrl_hp: hpgrp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO11__GPIO2_IO_BIT11		0x31e
+		>;
+	};
+
+	pinctrl_i2c4_pcal6408: i2c4pcal6498grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18			0x31e
+		>;
+	};
+
+	pinctrl_i2c7_pcal6524: i2c7pcal6524grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO36__GPIO5_IO_BIT16			0x31e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL		0x40000b9e
+			IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL		0x40000b9e
+			IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO00__LPI2C3_SDA				0x40000b9e
+			IMX95_PAD_GPIO_IO01__LPI2C3_SCL				0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO30__LPI2C4_SDA			0x40000b9e
+			IMX95_PAD_GPIO_IO31__LPI2C4_SCL			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO22__LPI2C5_SDA			0x40000b9e
+			IMX95_PAD_GPIO_IO23__LPI2C5_SCL			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c6: lpi2c6grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO02__LPI2C6_SDA			0x40000b9e
+			IMX95_PAD_GPIO_IO03__LPI2C6_SCL			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c7: lpi2c7grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO08__LPI2C7_SDA			0x40000b9e
+			IMX95_PAD_GPIO_IO09__LPI2C7_SCL			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpspi7: lpspi7grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO04__GPIO2_IO_BIT4		0x3fe
+			IMX95_PAD_GPIO_IO05__LPSPI7_SIN			0x3fe
+			IMX95_PAD_GPIO_IO06__LPSPI7_SOUT		0x3fe
+			IMX95_PAD_GPIO_IO07__LPSPI7_SCK			0x3fe
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B		0x4000031e
+		>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B		0x4000031e
+		>;
+	};
+
+	pinctrl_pcal6416: pcal6416grp {
+		fsl,pins = <
+			IMX95_PAD_CCM_CLKO3__GPIO4_IO_BIT28			0x31e
+		>;
+	};
+
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK				0x31e
+			IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0	0x31e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_RX_DATA_BIT0    0x31e
+			IMX95_PAD_SAI1_TXC__AONMIX_TOP_SAI1_TX_BCLK      0x31e
+			IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_SYNC     0x31e
+			IMX95_PAD_SAI1_TXD0__AONMIX_TOP_SAI1_TX_DATA_BIT0    0x31e
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_SAI2_RX_BCLK			0x31e
+			IMX95_PAD_ENET2_MDC__NETCMIX_TOP_SAI2_RX_SYNC			0x31e
+			IMX95_PAD_ENET2_TD3__NETCMIX_TOP_SAI2_RX_DATA_BIT0		0x31e
+			IMX95_PAD_ENET2_TD2__NETCMIX_TOP_SAI2_RX_DATA_BIT1		0x31e
+			IMX95_PAD_ENET2_TXC__NETCMIX_TOP_SAI2_TX_BCLK			0x31e
+			IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_SAI2_TX_SYNC		0x31e
+			IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_SAI2_TX_DATA_BIT0		0x31e
+			IMX95_PAD_ENET2_RXC__NETCMIX_TOP_SAI2_TX_DATA_BIT1		0x31e
+			IMX95_PAD_ENET2_RD0__NETCMIX_TOP_SAI2_TX_DATA_BIT2		0x31e
+			IMX95_PAD_ENET2_RD1__NETCMIX_TOP_SAI2_TX_DATA_BIT3		0x31e
+			IMX95_PAD_ENET2_RD2__NETCMIX_TOP_SAI2_MCLK			0x31e
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO17__SAI3_MCLK				0x31e
+			IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK			0x31e
+			IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC			0x31e
+			IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0			0x31e
+			IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0			0x31e
+		>;
+	};
+
+	pinctrl_tpm3: tpm3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO12__TPM3_CH2			0x51e
+		>;
+	};
+
+	pinctrl_tpm6: tpm6grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO19__TPM6_CH2			0x51e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX      0x31e
+			IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX      0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			IMX95_PAD_DAP_TDO_TRACESWO__LPUART5_TX		0x31e
+			IMX95_PAD_DAP_TDI__LPUART5_RX			0x31e
+			IMX95_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B		0x31e
+			IMX95_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B		0x31e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x158e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x138e
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x138e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x158e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x138e
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x138e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x15fe
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x13fe
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x13fe
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x13fe
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x13fe
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x13fe
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x13fe
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x13fe
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x13fe
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x13fe
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x15fe
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7		0x31e
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14			0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK			0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD			0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK			0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD			0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK			0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD			0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+};
+
+&thermal_zones {
+	a55-thermal {
+		trips {
+			atrip2: trip2 {
+				temperature = <55000>;
+				hysteresis = <2000>;
+				type = "active";
+			};
+
+			atrip3: trip3 {
+				temperature = <65000>;
+				hysteresis = <2000>;
+				type = "active";
+			};
+
+			atrip4: trip4 {
+				temperature = <75000>;
+				hysteresis = <2000>;
+				type = "active";
+			};
+		};
+
+		cooling-maps {
+			map1 {
+				trip = <&atrip2>;
+				cooling-device = <&fan0 0 1>;
+			};
+
+			map2 {
+				trip = <&atrip3>;
+				cooling-device = <&fan0 1 2>;
+			};
+
+			map3 {
+				trip = <&atrip4>;
+				cooling-device = <&fan0 2 3>;
+			};
+		};
+	};
+
+	pf09-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 2>;
+
+		trips {
+			pf09_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf09_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53arm-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 4>;
+
+		cooling-maps {
+			map0 {
+				trip = <&pf5301_alert>;
+				cooling-device =
+					<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+
+		trips {
+			pf5301_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5301_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53soc-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 3>;
+
+		trips {
+			pf5302_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5302_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+};
+
+&tpm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm6>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-clock.h b/arch/arm64/boot/dts/freescale/imx95-clock.h
new file mode 100644
index 000000000000..e1f91203e794
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-clock.h
@@ -0,0 +1,187 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
+/*
+ * Copyright 2024 NXP
+ */
+
+#ifndef __CLOCK_IMX95_H
+#define __CLOCK_IMX95_H
+
+/* The index should match i.MX95 SCMI Firmware */
+#define IMX95_CLK_32K                       1
+#define IMX95_CLK_24M                       2
+#define IMX95_CLK_FRO                       3
+#define IMX95_CLK_SYSPLL1_VCO               4
+#define IMX95_CLK_SYSPLL1_PFD0_UNGATED      5
+#define IMX95_CLK_SYSPLL1_PFD0              6
+#define IMX95_CLK_SYSPLL1_PFD0_DIV2         7
+#define IMX95_CLK_SYSPLL1_PFD1_UNGATED      8
+#define IMX95_CLK_SYSPLL1_PFD1              9
+#define IMX95_CLK_SYSPLL1_PFD1_DIV2         10
+#define IMX95_CLK_SYSPLL1_PFD2_UNGATED      11
+#define IMX95_CLK_SYSPLL1_PFD2              12
+#define IMX95_CLK_SYSPLL1_PFD2_DIV2         13
+#define IMX95_CLK_AUDIOPLL1_VCO             14
+#define IMX95_CLK_AUDIOPLL1                 15
+#define IMX95_CLK_AUDIOPLL2_VCO             16
+#define IMX95_CLK_AUDIOPLL2                 17
+#define IMX95_CLK_VIDEOPLL1_VCO             18
+#define IMX95_CLK_VIDEOPLL1                 19
+#define IMX95_CLK_RESERVED20                20
+#define IMX95_CLK_RESERVED21                21
+#define IMX95_CLK_RESERVED22                22
+#define IMX95_CLK_RESERVED23                23
+#define IMX95_CLK_ARMPLL_VCO                24
+#define IMX95_CLK_ARMPLL_PFD0_UNGATED       25
+#define IMX95_CLK_ARMPLL_PFD0               26
+#define IMX95_CLK_ARMPLL_PFD1_UNGATED       27
+#define IMX95_CLK_ARMPLL_PFD1               28
+#define IMX95_CLK_ARMPLL_PFD2_UNGATED       29
+#define IMX95_CLK_ARMPLL_PFD2               30
+#define IMX95_CLK_ARMPLL_PFD3_UNGATED       31
+#define IMX95_CLK_ARMPLL_PFD3               32
+#define IMX95_CLK_DRAMPLL_VCO               33
+#define IMX95_CLK_DRAMPLL                   34
+#define IMX95_CLK_HSIOPLL_VCO               35
+#define IMX95_CLK_HSIOPLL                   36
+#define IMX95_CLK_LDBPLL_VCO                37
+#define IMX95_CLK_LDBPLL                    38
+#define IMX95_CLK_EXT1                      39
+#define IMX95_CLK_EXT2                      40
+
+#define IMX95_CCM_NUM_CLK_SRC               41
+
+#define IMX95_CLK_ADC                      (IMX95_CCM_NUM_CLK_SRC + 0)
+#define IMX95_CLK_TMU                      (IMX95_CCM_NUM_CLK_SRC + 1)
+#define IMX95_CLK_BUSAON                   (IMX95_CCM_NUM_CLK_SRC + 2)
+#define IMX95_CLK_CAN1                     (IMX95_CCM_NUM_CLK_SRC + 3)
+#define IMX95_CLK_I3C1                     (IMX95_CCM_NUM_CLK_SRC + 4)
+#define IMX95_CLK_I3C1SLOW                 (IMX95_CCM_NUM_CLK_SRC + 5)
+#define IMX95_CLK_LPI2C1                   (IMX95_CCM_NUM_CLK_SRC + 6)
+#define IMX95_CLK_LPI2C2                   (IMX95_CCM_NUM_CLK_SRC + 7)
+#define IMX95_CLK_LPSPI1                   (IMX95_CCM_NUM_CLK_SRC + 8)
+#define IMX95_CLK_LPSPI2                   (IMX95_CCM_NUM_CLK_SRC + 9)
+#define IMX95_CLK_LPTMR1                   (IMX95_CCM_NUM_CLK_SRC + 10)
+#define IMX95_CLK_LPUART1                  (IMX95_CCM_NUM_CLK_SRC + 11)
+#define IMX95_CLK_LPUART2                  (IMX95_CCM_NUM_CLK_SRC + 12)
+#define IMX95_CLK_M33                      (IMX95_CCM_NUM_CLK_SRC + 13)
+#define IMX95_CLK_M33SYSTICK               (IMX95_CCM_NUM_CLK_SRC + 14)
+#define IMX95_CLK_MQS1                     (IMX95_CCM_NUM_CLK_SRC + 15)
+#define IMX95_CLK_PDM                      (IMX95_CCM_NUM_CLK_SRC + 16)
+#define IMX95_CLK_SAI1                     (IMX95_CCM_NUM_CLK_SRC + 17)
+#define IMX95_CLK_SENTINEL                 (IMX95_CCM_NUM_CLK_SRC + 18)
+#define IMX95_CLK_TPM2                     (IMX95_CCM_NUM_CLK_SRC + 19)
+#define IMX95_CLK_TSTMR1                   (IMX95_CCM_NUM_CLK_SRC + 20)
+#define IMX95_CLK_CAMAPB                   (IMX95_CCM_NUM_CLK_SRC + 21)
+#define IMX95_CLK_CAMAXI                   (IMX95_CCM_NUM_CLK_SRC + 22)
+#define IMX95_CLK_CAMCM0                   (IMX95_CCM_NUM_CLK_SRC + 23)
+#define IMX95_CLK_CAMISI                   (IMX95_CCM_NUM_CLK_SRC + 24)
+#define IMX95_CLK_MIPIPHYCFG               (IMX95_CCM_NUM_CLK_SRC + 25)
+#define IMX95_CLK_MIPIPHYPLLBYPASS         (IMX95_CCM_NUM_CLK_SRC + 26)
+#define IMX95_CLK_MIPIPHYPLLREF            (IMX95_CCM_NUM_CLK_SRC + 27)
+#define IMX95_CLK_MIPITESTBYTE             (IMX95_CCM_NUM_CLK_SRC + 28)
+#define IMX95_CLK_A55                      (IMX95_CCM_NUM_CLK_SRC + 29)
+#define IMX95_CLK_A55MTRBUS                (IMX95_CCM_NUM_CLK_SRC + 30)
+#define IMX95_CLK_A55PERIPH                (IMX95_CCM_NUM_CLK_SRC + 31)
+#define IMX95_CLK_DRAMALT                  (IMX95_CCM_NUM_CLK_SRC + 32)
+#define IMX95_CLK_DRAMAPB                  (IMX95_CCM_NUM_CLK_SRC + 33)
+#define IMX95_CLK_DISPAPB                  (IMX95_CCM_NUM_CLK_SRC + 34)
+#define IMX95_CLK_DISPAXI                  (IMX95_CCM_NUM_CLK_SRC + 35)
+#define IMX95_CLK_DISPDP                   (IMX95_CCM_NUM_CLK_SRC + 36)
+#define IMX95_CLK_DISPOCRAM                (IMX95_CCM_NUM_CLK_SRC + 37)
+#define IMX95_CLK_DISPUSB31                (IMX95_CCM_NUM_CLK_SRC + 38)
+#define IMX95_CLK_DISP1PIX                 (IMX95_CCM_NUM_CLK_SRC + 39)
+#define IMX95_CLK_DISP2PIX                 (IMX95_CCM_NUM_CLK_SRC + 40)
+#define IMX95_CLK_DISP3PIX                 (IMX95_CCM_NUM_CLK_SRC + 41)
+#define IMX95_CLK_GPUAPB                   (IMX95_CCM_NUM_CLK_SRC + 42)
+#define IMX95_CLK_GPU                      (IMX95_CCM_NUM_CLK_SRC + 43)
+#define IMX95_CLK_HSIOACSCAN480M           (IMX95_CCM_NUM_CLK_SRC + 44)
+#define IMX95_CLK_HSIOACSCAN80M            (IMX95_CCM_NUM_CLK_SRC + 45)
+#define IMX95_CLK_HSIO                     (IMX95_CCM_NUM_CLK_SRC + 46)
+#define IMX95_CLK_HSIOPCIEAUX              (IMX95_CCM_NUM_CLK_SRC + 47)
+#define IMX95_CLK_HSIOPCIETEST160M         (IMX95_CCM_NUM_CLK_SRC + 48)
+#define IMX95_CLK_HSIOPCIETEST400M         (IMX95_CCM_NUM_CLK_SRC + 49)
+#define IMX95_CLK_HSIOPCIETEST500M         (IMX95_CCM_NUM_CLK_SRC + 50)
+#define IMX95_CLK_HSIOUSBTEST50M           (IMX95_CCM_NUM_CLK_SRC + 51)
+#define IMX95_CLK_HSIOUSBTEST60M           (IMX95_CCM_NUM_CLK_SRC + 52)
+#define IMX95_CLK_BUSM7                    (IMX95_CCM_NUM_CLK_SRC + 53)
+#define IMX95_CLK_M7                       (IMX95_CCM_NUM_CLK_SRC + 54)
+#define IMX95_CLK_M7SYSTICK                (IMX95_CCM_NUM_CLK_SRC + 55)
+#define IMX95_CLK_BUSNETCMIX               (IMX95_CCM_NUM_CLK_SRC + 56)
+#define IMX95_CLK_ENET                     (IMX95_CCM_NUM_CLK_SRC + 57)
+#define IMX95_CLK_ENETPHYTEST200M          (IMX95_CCM_NUM_CLK_SRC + 58)
+#define IMX95_CLK_ENETPHYTEST500M          (IMX95_CCM_NUM_CLK_SRC + 59)
+#define IMX95_CLK_ENETPHYTEST667M          (IMX95_CCM_NUM_CLK_SRC + 60)
+#define IMX95_CLK_ENETREF                  (IMX95_CCM_NUM_CLK_SRC + 61)
+#define IMX95_CLK_ENETTIMER1               (IMX95_CCM_NUM_CLK_SRC + 62)
+#define IMX95_CLK_MQS2                     (IMX95_CCM_NUM_CLK_SRC + 63)
+#define IMX95_CLK_SAI2                     (IMX95_CCM_NUM_CLK_SRC + 64)
+#define IMX95_CLK_NOCAPB                   (IMX95_CCM_NUM_CLK_SRC + 65)
+#define IMX95_CLK_NOC                      (IMX95_CCM_NUM_CLK_SRC + 66)
+#define IMX95_CLK_NPUAPB                   (IMX95_CCM_NUM_CLK_SRC + 67)
+#define IMX95_CLK_NPU                      (IMX95_CCM_NUM_CLK_SRC + 68)
+#define IMX95_CLK_CCMCKO1                  (IMX95_CCM_NUM_CLK_SRC + 69)
+#define IMX95_CLK_CCMCKO2                  (IMX95_CCM_NUM_CLK_SRC + 70)
+#define IMX95_CLK_CCMCKO3                  (IMX95_CCM_NUM_CLK_SRC + 71)
+#define IMX95_CLK_CCMCKO4                  (IMX95_CCM_NUM_CLK_SRC + 72)
+#define IMX95_CLK_VPUAPB                   (IMX95_CCM_NUM_CLK_SRC + 73)
+#define IMX95_CLK_VPU                      (IMX95_CCM_NUM_CLK_SRC + 74)
+#define IMX95_CLK_VPUDSP                   (IMX95_CCM_NUM_CLK_SRC + 75)
+#define IMX95_CLK_VPUJPEG                  (IMX95_CCM_NUM_CLK_SRC + 76)
+#define IMX95_CLK_AUDIOXCVR                (IMX95_CCM_NUM_CLK_SRC + 77)
+#define IMX95_CLK_BUSWAKEUP                (IMX95_CCM_NUM_CLK_SRC + 78)
+#define IMX95_CLK_CAN2                     (IMX95_CCM_NUM_CLK_SRC + 79)
+#define IMX95_CLK_CAN3                     (IMX95_CCM_NUM_CLK_SRC + 80)
+#define IMX95_CLK_CAN4                     (IMX95_CCM_NUM_CLK_SRC + 81)
+#define IMX95_CLK_CAN5                     (IMX95_CCM_NUM_CLK_SRC + 82)
+#define IMX95_CLK_FLEXIO1                  (IMX95_CCM_NUM_CLK_SRC + 83)
+#define IMX95_CLK_FLEXIO2                  (IMX95_CCM_NUM_CLK_SRC + 84)
+#define IMX95_CLK_FLEXSPI1                 (IMX95_CCM_NUM_CLK_SRC + 85)
+#define IMX95_CLK_I3C2                     (IMX95_CCM_NUM_CLK_SRC + 86)
+#define IMX95_CLK_I3C2SLOW                 (IMX95_CCM_NUM_CLK_SRC + 87)
+#define IMX95_CLK_LPI2C3                   (IMX95_CCM_NUM_CLK_SRC + 88)
+#define IMX95_CLK_LPI2C4                   (IMX95_CCM_NUM_CLK_SRC + 89)
+#define IMX95_CLK_LPI2C5                   (IMX95_CCM_NUM_CLK_SRC + 90)
+#define IMX95_CLK_LPI2C6                   (IMX95_CCM_NUM_CLK_SRC + 91)
+#define IMX95_CLK_LPI2C7                   (IMX95_CCM_NUM_CLK_SRC + 92)
+#define IMX95_CLK_LPI2C8                   (IMX95_CCM_NUM_CLK_SRC + 93)
+#define IMX95_CLK_LPSPI3                   (IMX95_CCM_NUM_CLK_SRC + 94)
+#define IMX95_CLK_LPSPI4                   (IMX95_CCM_NUM_CLK_SRC + 95)
+#define IMX95_CLK_LPSPI5                   (IMX95_CCM_NUM_CLK_SRC + 96)
+#define IMX95_CLK_LPSPI6                   (IMX95_CCM_NUM_CLK_SRC + 97)
+#define IMX95_CLK_LPSPI7                   (IMX95_CCM_NUM_CLK_SRC + 98)
+#define IMX95_CLK_LPSPI8                   (IMX95_CCM_NUM_CLK_SRC + 99)
+#define IMX95_CLK_LPTMR2                   (IMX95_CCM_NUM_CLK_SRC + 100)
+#define IMX95_CLK_LPUART3                  (IMX95_CCM_NUM_CLK_SRC + 101)
+#define IMX95_CLK_LPUART4                  (IMX95_CCM_NUM_CLK_SRC + 102)
+#define IMX95_CLK_LPUART5                  (IMX95_CCM_NUM_CLK_SRC + 103)
+#define IMX95_CLK_LPUART6                  (IMX95_CCM_NUM_CLK_SRC + 104)
+#define IMX95_CLK_LPUART7                  (IMX95_CCM_NUM_CLK_SRC + 105)
+#define IMX95_CLK_LPUART8                  (IMX95_CCM_NUM_CLK_SRC + 106)
+#define IMX95_CLK_SAI3                     (IMX95_CCM_NUM_CLK_SRC + 107)
+#define IMX95_CLK_SAI4                     (IMX95_CCM_NUM_CLK_SRC + 108)
+#define IMX95_CLK_SAI5                     (IMX95_CCM_NUM_CLK_SRC + 109)
+#define IMX95_CLK_SPDIF                    (IMX95_CCM_NUM_CLK_SRC + 110)
+#define IMX95_CLK_SWOTRACE                 (IMX95_CCM_NUM_CLK_SRC + 111)
+#define IMX95_CLK_TPM4                     (IMX95_CCM_NUM_CLK_SRC + 112)
+#define IMX95_CLK_TPM5                     (IMX95_CCM_NUM_CLK_SRC + 113)
+#define IMX95_CLK_TPM6                     (IMX95_CCM_NUM_CLK_SRC + 114)
+#define IMX95_CLK_TSTMR2                   (IMX95_CCM_NUM_CLK_SRC + 115)
+#define IMX95_CLK_USBPHYBURUNIN            (IMX95_CCM_NUM_CLK_SRC + 116)
+#define IMX95_CLK_USDHC1                   (IMX95_CCM_NUM_CLK_SRC + 117)
+#define IMX95_CLK_USDHC2                   (IMX95_CCM_NUM_CLK_SRC + 118)
+#define IMX95_CLK_USDHC3                   (IMX95_CCM_NUM_CLK_SRC + 119)
+#define IMX95_CLK_V2XPK                    (IMX95_CCM_NUM_CLK_SRC + 120)
+#define IMX95_CLK_WAKEUPAXI                (IMX95_CCM_NUM_CLK_SRC + 121)
+#define IMX95_CLK_XSPISLVROOT              (IMX95_CCM_NUM_CLK_SRC + 122)
+#define IMX95_CLK_SEL_EXT                  (IMX95_CCM_NUM_CLK_SRC + 123 + 0)
+#define IMX95_CLK_SEL_A55C0                (IMX95_CCM_NUM_CLK_SRC + 123 + 1)
+#define IMX95_CLK_SEL_A55C1                (IMX95_CCM_NUM_CLK_SRC + 123 + 2)
+#define IMX95_CLK_SEL_A55C2                (IMX95_CCM_NUM_CLK_SRC + 123 + 3)
+#define IMX95_CLK_SEL_A55C3                (IMX95_CCM_NUM_CLK_SRC + 123 + 4)
+#define IMX95_CLK_SEL_A55C4                (IMX95_CCM_NUM_CLK_SRC + 123 + 5)
+#define IMX95_CLK_SEL_A55C5                (IMX95_CCM_NUM_CLK_SRC + 123 + 6)
+#define IMX95_CLK_SEL_A55P                 (IMX95_CCM_NUM_CLK_SRC + 123 + 7)
+#define IMX95_CLK_SEL_DRAM                 (IMX95_CCM_NUM_CLK_SRC + 123 + 8)
+#define IMX95_CLK_SEL_TEMPSENSE            (IMX95_CCM_NUM_CLK_SRC + 123 + 9)
+
+#endif	/* __CLOCK_IMX95_H */
diff --git a/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts b/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts
new file mode 100644
index 000000000000..26c2df9b1b60
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/pwm/pwm.h>
+
+#include "imx95-phycore-fpsc.dtsi"
+
+/ {
+	compatible = "phytec,imx95-libra-rdk-fpsc",
+		"phytec,imx95-phycore-fpsc", "fsl,imx95";
+	model = "PHYTEC Libra i.MX95 RDK FPSC";
+
+	aliases {
+		can1 = &flexcan2;
+		can2 = &flexcan1;
+		ethernet0 = &enetc_port0;
+		serial0 = &lpuart7;
+		serial1 = &lpuart8;
+	};
+
+	chosen {
+		stdout-path = &lpuart7;
+	};
+
+	backlight_lvds0: backlight0 {
+		compatible = "pwm-backlight";
+		pinctrl-0 = <&pinctrl_lvds0>;
+		power-supply = <&reg_vdd_12v0>;
+		status = "disabled";
+	};
+
+	transceiver1: can-phy {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		enable-gpios = <&gpio_expander 10 GPIO_ACTIVE_LOW>;
+	};
+
+	transceiver2: can-phy {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		enable-gpios = <&gpio_expander 9 GPIO_ACTIVE_LOW>;
+	};
+
+	panel0_lvds: panel-lvds0 {
+		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_vdd_3v3>;
+		status = "disabled";
+	};
+
+	reg_vdd_12v0: regulator-vdd-12v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "VDD_12V0";
+	};
+
+	reg_vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VDD_1V8";
+	};
+
+	reg_vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_3V3";
+	};
+
+	reg_vdd_5v0: regulator-vdd-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "VDD_5V0";
+	};
+};
+
+&enetc_port0 {
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&enetc_port2 {
+	managed = "in-band-status";
+	phy-handle = <&ethphy2>;
+	phy-mode = "10gbase-r";
+};
+
+/* CAN FD */
+&flexcan1 {
+	phys = <&transceiver1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	phys = <&transceiver2>;
+	status = "okay";
+};
+
+/* SPI-NOR */
+&flexspi1 {
+	pinctrl-0 = <&pinctrl_flexspi>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spi_nor: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <166000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_vdd_1v8>;
+	};
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "RGMII2_nINT", "GPIO4", "RTC_INT", "",
+			  "LVDS1_BL_EN";
+};
+
+&lpi2c1 {
+	temperature-sensor@4f {
+		compatible = "nxp,p3t1755";
+		reg = <0x4f>;
+		vs-supply = <&reg_vdd_1v8>;
+	};
+};
+
+&lpi2c3 {
+	status = "okay";
+
+	leds@62 {
+		compatible = "nxp,pca9533";
+		reg = <0x62>;
+
+		led-1 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-2 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-3 {
+			type = <PCA9532_TYPE_LED>;
+		};
+	};
+};
+
+&lpi2c4 {
+	status = "okay";
+
+	gpio_expander: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "CSI1_CTRL1", "CSI1_CTRL2", "CSI1_CTRL3",
+				  "CSI1_CTRL4", "CSI2_CTRL1", "CSI2_CTRL2",
+				  "CSI2_CTRL3", "CSI2_CTRL4", "CLK_EN_AV",
+				  "nCAN2_EN", "nCAN1_EN", "PCIE1_nWAKE",
+				  "PCIE2_nWAKE", "PCIE2_nALERT_3V3",
+				  "UART1_BT_RS_SEL", "UART1_RS232_485_SEL";
+		vcc-supply = <&reg_vdd_1v8>;
+
+		uart1_bt_rs_sel: bt-rs-hog {
+			gpios = <14 GPIO_ACTIVE_HIGH>;
+			gpio-hog;
+			line-name = "UART1_BT_RS_SEL";
+			output-low;
+		};
+	};
+};
+
+&lpi2c5 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vdd_1v8>;
+	};
+};
+
+/* Used for M33 debug */
+&lpuart2 {
+	pinctrl-0 = <&pinctrl_lpuart2>;
+	pinctrl-names = "default";
+};
+
+/* A-55 debug UART */
+&lpuart7 {
+	status = "okay";
+};
+
+/* RS232/RS485/BT */
+&lpuart8 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&netc_emdio { /* RGMII2 */
+	ethphy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		enet-phy-lane-no-swap;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+
+	ethphy2: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x8>;
+		max-speed = <10000>; /* 10Gbit/s */
+		status = "disabled";
+	};
+};
+
+&pcie0 {
+	reset-gpio = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&pcie1 {
+	reset-gpio = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&rv3028 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rtc>;
+	interrupt-parent = <&gpio2>;
+	interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+	aux-voltage-chargeable = <1>;
+	wakeup-source;
+	trickle-resistor-ohms = <3000>;
+};
+
+&scmi_iomuxc {
+	pinctrl_lpuart2: lpuart2grp { /* FPSC proprietary */
+		fsl,pins = <
+			IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART2_TX	0x31e
+			IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART2_RX	0x31e
+		>;
+	};
+
+	pinctrl_lvds0: lvds0grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO20__GPIO2_IO_BIT20	0x31e
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18	0x31e
+		>;
+	};
+
+	pinctrl_tpm4: tpm4grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO21__TPM4_CH1	0x51e
+		>;
+	};
+};
+
+&tpm4 {
+	pinctrl-0 = <&pinctrl_tpm4>;
+	pinctrl-names = "default";
+};
+
+&usb3 {
+	fsl,over-current-active-low;
+	fsl,power-active-low;
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb3_phy {
+	vbus-supply = <&reg_vdd_5v0>;
+	status = "okay";
+};
+
+/* uSD Card */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-phycore-fpsc.dtsi b/arch/arm64/boot/dts/freescale/imx95-phycore-fpsc.dtsi
new file mode 100644
index 000000000000..7519d5bd06ba
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-phycore-fpsc.dtsi
@@ -0,0 +1,656 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 PHYTEC Messtechnik GmbH
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx95.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-i.MX95 FPSC";
+	compatible = "phytec,imx95-phycore-fpsc", "fsl,imx95";
+
+	aliases {
+		ethernet1 = &enetc_port1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c5;
+		i2c3 = &lpi2c3;
+		i2c4 = &lpi2c4;
+		i2c5 = &lpi2c1;
+		rtc0 = &rv3028;
+		rtc1 = &scmi_bbm;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x00000001 0x00000000>;
+	};
+
+	reg_nvcc_aon: regulator-nvcc-aon {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VDD_IO";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDDSW_SD2";
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x7f000000>;
+			reusable;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&enetc_port0 { /* FPSC RGMII2 */
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_enetc0>;
+	pinctrl-names = "default";
+};
+
+&enetc_port1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_enetc1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&flexcan1 { /* FPSC CAN1 */
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+};
+
+&flexcan2 { /* FPSC CAN2 */
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+};
+
+&flexspi1 { /* FPSC QSPI */
+	pinctrl-0 = <&pinctrl_flexspi>;
+	pinctrl-names = "default";
+};
+
+&gpio1 { /* FPSC GPIO */
+	gpio-line-names = "", "", "", "", "GPIO2",
+			  "GPIO1", "", "", "", "",
+			  "PCIE1_nPERST", "USB1_PWR_EN", "GPIO3", "USB2_PWR_EN", "PCIE2_nPERST";
+	pinctrl-0 = <&pinctrl_gpio1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio2 { /* FPSC GPIO */
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "RGMII2_nINT", "GPIO4";
+	pinctrl-0 = <&pinctrl_gpio2>;
+	pinctrl-names = "default";
+};
+
+&gpio3 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "SD2_RESET_B";
+};
+
+&gpio4 {
+	gpio-line-names = "ENET2_nINT";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "USB1_OC", "USB2_OC";
+};
+
+&lpi2c1 { /* FPSC I2C5 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	dram_sense: temperature-sensor@48 {
+		compatible = "ti,tmp102";
+		reg = <0x48>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	emmc_sense: temperature-sensor@49 {
+		compatible = "ti,tmp102";
+		reg = <0x49>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	ethphy_sense: temperature-sensor@4a {
+		compatible = "ti,tmp102";
+		reg = <0x4a>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	pmic_sense: temperature-sensor@4b {
+		compatible = "ti,tmp102";
+		reg = <0x4b>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	/* User EEPROM */
+	eeprom@50 {
+		compatible = "st,24c32", "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_nvcc_aon>;
+	};
+
+	/* Factory EEPROM */
+	eeprom@51 {
+		compatible = "st,24c32", "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+		vcc-supply = <&reg_nvcc_aon>;
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+	};
+
+	/* User EEPROM ID page */
+	eeprom@58 {
+		compatible = "st,24c32", "atmel,24c32";
+		reg = <0x58>;
+		pagesize = <32>;
+		vcc-supply = <&reg_nvcc_aon>;
+	};
+};
+
+&lpi2c2 { /* FPSC I2C1 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-names = "default";
+};
+
+&lpi2c3 { /* FPSC I2C3 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-names = "default";
+};
+
+&lpi2c4 { /* FPSC I2C4 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c4>;
+	pinctrl-names = "default";
+};
+
+&lpi2c5 { /* FPSC I2C2 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	pinctrl-names = "default";
+};
+
+&lpspi3 { /* FPSC SPI2 */
+	pinctrl-0 = <&pinctrl_lpspi3>;
+	pinctrl-names = "default";
+};
+
+&lpspi4 { /* FPSC SPI3 */
+	pinctrl-0 = <&pinctrl_lpspi4>;
+	pinctrl-names = "default";
+};
+
+&lpspi7 { /* FPSC SPI1 */
+	pinctrl-0 = <&pinctrl_lpspi7>;
+	pinctrl-names = "default";
+};
+
+&lpuart5 { /* FPSC UART2 */
+	pinctrl-0 = <&pinctrl_lpuart5>;
+	pinctrl-names = "default";
+};
+
+&lpuart7 { /* FPSC UART3 */
+	pinctrl-0 = <&pinctrl_lpuart7>;
+	pinctrl-names = "default";
+};
+
+&lpuart8 { /* FPSC UART1 */
+	pinctrl-0 = <&pinctrl_lpuart8>;
+	pinctrl-names = "default";
+};
+
+&netc_blk_ctrl {
+	status = "okay";
+};
+
+&netc_emdio { /* FPSC RGMII2 */
+	pinctrl-0 = <&pinctrl_emdio>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ethphy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		enet-phy-lane-no-swap;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+&netcmix_blk_ctrl {
+	status = "okay";
+};
+
+&pcie0 { /* FPSC PCIE1 */
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+};
+
+&pcie1 { /* FPSC PCIE2 */
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+};
+
+&sai5 {	/* FPSC SAI1 */
+	pinctrl-0 = <&pinctrl_sai5>;
+	pintrc-names = "default";
+};
+
+&scmi_iomuxc {
+	pinctrl_emdio: emdiogrp {
+		fsl,pins = <
+			IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO	0x97e	/* RGMII2_MDIO */
+			IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC	0x502	/* RGMII2_MDC */
+		>;
+	};
+
+	pinctrl_enetc0: enetc0grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO16__GPIO2_IO_BIT16			0x31e	/* RGMII2_nINT */
+			IMX95_PAD_CCM_CLKO3__NETCMIX_TOP_NETC_TMR_1588_TRIG2	0x31e	/* RGMII2_EVENT_IN */
+			IMX95_PAD_CCM_CLKO4__NETCMIX_TOP_NETC_TMR_1588_PP2	0x31e	/* RGMII2_EVENT_OUT */
+
+			IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x57e	/* RGMII2_TX_3 */
+			IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x57e	/* RGMII2_TX_2 */
+			IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x57e	/* RGMII2_TX_1 */
+			IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x57e	/* RGMII2_TX_0 */
+			IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x57e	/* RGMII2_TX_CTL */
+			IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK	0x58e	/* RGMII2_TXC */
+			IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3		0x57e	/* RGMII2_RX_3 */
+			IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2		0x57e	/* RGMII2_RX_2 */
+			IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1		0x57e	/* RGMII2_RX_1 */
+			IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0		0x57e	/* RGMII2_RX_0 */
+			IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x57e	/* RGMII2_RX_CTL */
+			IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK	0x58e	/* RGMII2_RXC */
+		>;
+	};
+
+	pinctrl_enetc1: enetc1grp {
+		fsl,pins = <
+			IMX95_PAD_ENET1_MDC__GPIO4_IO_BIT0			0x31e
+			IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0		0x57e
+			IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1		0x57e
+			IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2		0x57e
+			IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3		0x57e
+			IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL	0x57e
+			IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK	0x58e
+			IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0		0x57e
+			IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1		0x57e
+			IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2		0x57e
+			IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3		0x57e
+			IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL	0x57e
+			IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK	0x58e
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX		0x51e	/* CAN1_TX */
+			IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX	0x51e	/* CAN1_RX */
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO25__CAN2_TX	0x51e	/* CAN2_TX */
+			IMX95_PAD_GPIO_IO27__CAN2_RX	0x51e	/* CAN2_RX */
+		>;
+	};
+
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B		0x3fe	/* QSPI_CE */
+			IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK		0x3fe	/* QSPI_CLK */
+			IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0	0x3fe	/* QSPI_DATA_0 */
+			IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1	0x3fe	/* QSPI_DATA_1 */
+			IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2	0x3fe	/* QSPI_DATA_2 */
+			IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3	0x3fe	/* QSPI_DATA_3 */
+			IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS		0x3fe	/* QSPI_DQS */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			IMX95_PAD_UART1_TXD__AONMIX_TOP_GPIO1_IO_BIT5	0x31e	/* GPIO1 */
+			IMX95_PAD_UART1_RXD__AONMIX_TOP_GPIO1_IO_BIT4	0x31e	/* GPIO2 */
+			IMX95_PAD_SAI1_TXC__AONMIX_TOP_GPIO1_IO_BIT12	0x31e	/* GPIO3 */
+		>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO17__GPIO2_IO_BIT17	0x31e	/* GPIO4 */
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL	0x40000b9e	/* I2C5_SCL */
+			IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA	0x40000b9e	/* I2C5_SDA */
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA	0x40000b9e	/* I2C1_SDA_DNU */
+			IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL	0x40000b9e	/* I2C1_SCL_DNU */
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e	/* I2C3_SDA */
+			IMX95_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e	/* I2C3_SCL */
+		>;
+	};
+
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e	/* I2C4_SDA */
+			IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x40000b9e	/* I2C4_SDL */
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO22__LPI2C5_SDA	0x40000b9e	/* I2C2_SDA */
+			IMX95_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e	/* I2C2_SCL */
+		>;
+	};
+
+	pinctrl_lpspi3: lpspi3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO11__LPSPI3_SCK		0x51e	/* SPI2_SCLK */
+			IMX95_PAD_GPIO_IO10__LPSPI3_SOUT	0x51e	/* SPI2_MOSI */
+			IMX95_PAD_GPIO_IO09__LPSPI3_SIN		0x51e	/* SPI2_MISO */
+			IMX95_PAD_GPIO_IO08__LPSPI3_PCS0	0x51e	/* SPI2_CS */
+		>;
+	};
+
+	pinctrl_lpspi4: lpspi4grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO21__LPSPI4_SCK		0x51e	/* SPI3_SCLK */
+			IMX95_PAD_GPIO_IO20__LPSPI4_SOUT	0x51e	/* SPI3_MOSI */
+			IMX95_PAD_GPIO_IO19__LPSPI4_SIN		0x51e	/* SPI3_MISO */
+			IMX95_PAD_GPIO_IO18__LPSPI4_PCS0	0x51e	/* SPI3_CS */
+		>;
+	};
+
+	pinctrl_lpspi7: lpspi7grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO07__LPSPI7_SCK		0x51e	/* SPI1_SCLK */
+			IMX95_PAD_GPIO_IO06__LPSPI7_SOUT	0x51e	/* SPI1_MOSI */
+			IMX95_PAD_GPIO_IO05__LPSPI7_SIN		0x51e	/* SPI1_MISO */
+			IMX95_PAD_GPIO_IO04__LPSPI7_PCS0	0x51e	/* SPI1_CS */
+		>;
+	};
+
+	pinctrl_lpuart5: lpuart5grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO01__LPUART5_RX		0x51e	/* UART2_RXD */
+			IMX95_PAD_GPIO_IO00__LPUART5_TX		0x51e	/* UART2_TXD */
+			IMX95_PAD_GPIO_IO03__LPUART5_RTS_B	0x51e	/* UART2_RTS */
+			IMX95_PAD_GPIO_IO02__LPUART5_CTS_B	0x51e	/* UART2_CTS */
+		>;
+	};
+
+	pinctrl_lpuart7: lpuart7grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO37__LPUART7_RX	0x31e	/* UART3_RXD */
+			IMX95_PAD_GPIO_IO36__LPUART7_TX	0x31e	/* UART3_TXD */
+		>;
+	};
+
+	pinctrl_lpuart8: lpuart8grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO13__LPUART8_RX		0x51e	/* UART1_RXD */
+			IMX95_PAD_GPIO_IO12__LPUART8_TX		0x51e	/* UART1_TXD */
+			IMX95_PAD_GPIO_IO15__LPUART8_RTS_B	0x51e	/* UART1_RTS */
+			IMX95_PAD_GPIO_IO14__LPUART8_CTS_B	0x51e	/* UART1_CTS */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B		0x31e	/* PCIE1_nCLKREQ */
+			IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_GPIO1_IO_BIT10	0x31e	/* PCIE1_nPERST */
+		>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B	0x31e	/* PCIE2_nCLKREQ */
+			IMX95_PAD_SAI1_RXD0__AONMIX_TOP_GPIO1_IO_BIT14	0x31e	/* PCIE2_nPERST */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7	0x31e
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_DQS__SAI5_RX_SYNC		0x51e	/* SAI1_RX_SYNC */
+			IMX95_PAD_XSPI1_SS1_B__SAI5_RX_BCLK		0x51e	/* SAI1_RX_BCLK */
+			IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0	0x51e	/* SAI1_RX_DATA */
+			IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC		0x51e	/* SAI1_TX_SYNC */
+			IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK		0x51e	/* SAI1_TX_BCLK */
+			IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0	0x51e	/* SAI1_TX_DATA */
+		>;
+	};
+
+	pinctrl_tpm3: tpm3grp {
+	      fsl,pins = <
+		      IMX95_PAD_GPIO_IO24__TPM3_CH3	0x51e	/* PWM1 */
+	      >;
+	};
+
+	pinctrl_tpm5: tpm5grp {
+	      fsl,pins = <
+		      IMX95_PAD_GPIO_IO26__TPM5_CH3	0x51e	/* PWM2 */
+	      >;
+	};
+
+	pinctrl_usbc: usbcgrp {
+		fsl,pins = <
+			IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11	0x51e	/* USB1_PWR_EN */
+			IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13		0x51e	/* USB1_OC */
+		>;
+	};
+
+	pinctrl_usb2: usb2grp {
+		fsl,pins = <
+			IMX95_PAD_SAI1_TXD0__AONMIX_TOP_GPIO1_IO_BIT13	0x51e	/* USB2_PWR_EN */
+			IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14		0x51e	/* USB2_OC */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x138e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x138e
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x158e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x138e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x138e
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x158e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x13fe
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x13fe
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x13fe
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x13fe
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x13fe
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x13fe
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x13fe
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x13fe
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x13fe
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x15fe
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x15fe
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CD_B__USDHC2_CD_B		0x31e	/* CD */
+			IMX95_PAD_SD2_CLK__USDHC2_CLK		0x158e	/* CLK */
+			IMX95_PAD_SD2_CMD__USDHC2_CMD		0x138e	/* CMD */
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0	0x138e	/* DATA0 */
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1	0x138e	/* DATA1 */
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2	0x138e	/* DATA2 */
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3	0x138e	/* DATA3 */
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CD_B__USDHC2_CD_B		0x31e	/* CD */
+			IMX95_PAD_SD2_CLK__USDHC2_CLK		0x158e	/* CLK */
+			IMX95_PAD_SD2_CMD__USDHC2_CMD		0x138e	/* CMD */
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0	0x138e	/* DATA0 */
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1	0x138e	/* DATA1 */
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2	0x138e	/* DATA2 */
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3	0x138e	/* DATA3 */
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CD_B__USDHC2_CD_B		0x31e	/* CD */
+			IMX95_PAD_SD2_CLK__USDHC2_CLK		0x15fe	/* CLK */
+			IMX95_PAD_SD2_CMD__USDHC2_CMD		0x13fe	/* CMD */
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe	/* DATA0 */
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe	/* DATA1 */
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe	/* DATA2 */
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe	/* DATA3 */
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			IMX95_PAD_SD3_CLK__USDHC3_CLK		0x158e	/* SDIO_CLK */
+			IMX95_PAD_SD3_CMD__USDHC3_CMD		0x138e	/* SDIO_CMD */
+			IMX95_PAD_SD3_DATA0__USDHC3_DATA0	0x138e	/* SDIO_DATA0 */
+			IMX95_PAD_SD3_DATA1__USDHC3_DATA1	0x138e	/* SDIO_DATA1 */
+			IMX95_PAD_SD3_DATA2__USDHC3_DATA2	0x138e	/* SDIO_DATA2 */
+			IMX95_PAD_SD3_DATA3__USDHC3_DATA3	0x138e	/* SDIO_DATA3 */
+		>;
+	};
+};
+
+&tpm3 { /* FPSC PWM1 */
+	pinctrl-0 = <&pinctrl_tpm3>;
+	pinctrl-names = "default";
+};
+
+&tpm5 {	/* FPSC PWM2 */
+	pinctrl-0 = <&pinctrl_tpm5>;
+	pinctrl-names = "default";
+};
+
+&usb3 { /* FPSC USB1 */
+	pinctrl-0 = <&pinctrl_usbc>;
+	pinctrl-names = "default";
+};
+
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	status = "okay";
+};
+
+&usdhc2 { /* FPSC SDCARD */
+	bus-width = <4>;
+	disable-wp;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	sd-uhs-sdr104;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+};
+
+&usdhc3 { /* FPSC SDIO */
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-pinfunc.h b/arch/arm64/boot/dts/freescale/imx95-pinfunc.h
new file mode 100644
index 000000000000..9f614eea7c86
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-pinfunc.h
@@ -0,0 +1,865 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright 2024 NXP
+ */
+
+#ifndef __DTS_IMX95_PINFUNC_H
+#define __DTS_IMX95_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define IMX95_PAD_DAP_TDI__JTAG_MUX_TDI                               0x0000 0x0204 0x0610 0x00 0x00
+#define IMX95_PAD_DAP_TDI__NETCMIX_TOP_MQS2_LEFT                      0x0000 0x0204 0x0000 0x01 0x00
+#define IMX95_PAD_DAP_TDI__NETCMIX_TOP_NETC_TMR_1588_ALARM1           0x0000 0x0204 0x0000 0x02 0x00
+#define IMX95_PAD_DAP_TDI__CAN2_TX                                    0x0000 0x0204 0x0000 0x03 0x00
+#define IMX95_PAD_DAP_TDI__FLEXIO2_FLEXIO_BIT30                       0x0000 0x0204 0x0000 0x04 0x00
+#define IMX95_PAD_DAP_TDI__GPIO3_IO_BIT28                             0x0000 0x0204 0x0000 0x05 0x00
+#define IMX95_PAD_DAP_TDI__LPUART5_RX                                 0x0000 0x0204 0x0570 0x06 0x00
+
+#define IMX95_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS                         0x0004 0x0208 0x0614 0x00 0x00
+#define IMX95_PAD_DAP_TMS_SWDIO__CAN4_TX                              0x0004 0x0208 0x0000 0x02 0x00
+#define IMX95_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO_BIT31                 0x0004 0x0208 0x0000 0x04 0x00
+#define IMX95_PAD_DAP_TMS_SWDIO__GPIO3_IO_BIT29                       0x0004 0x0208 0x0000 0x05 0x00
+#define IMX95_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B                        0x0004 0x0208 0x0000 0x06 0x00
+
+#define IMX95_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK                        0x0008 0x020C 0x060C 0x00 0x00
+#define IMX95_PAD_DAP_TCLK_SWCLK__CAN4_RX                             0x0008 0x020C 0x044C 0x02 0x00
+#define IMX95_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO_BIT30                0x0008 0x020C 0x0460 0x04 0x00
+#define IMX95_PAD_DAP_TCLK_SWCLK__GPIO3_IO_BIT30                      0x0008 0x020C 0x0000 0x05 0x00
+#define IMX95_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B                       0x0008 0x020C 0x056C 0x06 0x00
+
+#define IMX95_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO                      0x000C 0x0210 0x0000 0x00 0x00
+#define IMX95_PAD_DAP_TDO_TRACESWO__NETCMIX_TOP_MQS2_RIGHT            0x000C 0x0210 0x0000 0x01 0x00
+#define IMX95_PAD_DAP_TDO_TRACESWO__NETCMIX_TOP_NETC_TMR_1588_ALARM   0x000C 0x0210 0x0000 0x02 0x00
+#define IMX95_PAD_DAP_TDO_TRACESWO__CAN2_RX                           0x000C 0x0210 0x0444 0x03 0x00
+#define IMX95_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO_BIT31              0x000C 0x0210 0x0464 0x04 0x00
+#define IMX95_PAD_DAP_TDO_TRACESWO__GPIO3_IO_BIT31                    0x000C 0x0210 0x0000 0x05 0x00
+#define IMX95_PAD_DAP_TDO_TRACESWO__LPUART5_TX                        0x000C 0x0210 0x0574 0x06 0x00
+
+#define IMX95_PAD_GPIO_IO00__GPIO2_IO_BIT0                            0x0010 0x0214 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO00__LPI2C3_SDA                               0x0010 0x0214 0x0504 0x11 0x00
+#define IMX95_PAD_GPIO_IO00__LPSPI6_PCS0                              0x0010 0x0214 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO00__LPUART5_TX                               0x0010 0x0214 0x0574 0x05 0x01
+#define IMX95_PAD_GPIO_IO00__LPI2C5_SDA                               0x0010 0x0214 0x0514 0x16 0x00
+#define IMX95_PAD_GPIO_IO00__FLEXIO1_FLEXIO_BIT0                      0x0010 0x0214 0x0468 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO01__GPIO2_IO_BIT1                            0x0014 0x0218 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO01__LPI2C3_SCL                               0x0014 0x0218 0x0500 0x11 0x00
+#define IMX95_PAD_GPIO_IO01__LPSPI6_SIN                               0x0014 0x0218 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO01__LPUART5_RX                               0x0014 0x0218 0x0570 0x05 0x01
+#define IMX95_PAD_GPIO_IO01__LPI2C5_SCL                               0x0014 0x0218 0x0510 0x16 0x00
+#define IMX95_PAD_GPIO_IO01__FLEXIO1_FLEXIO_BIT1                      0x0014 0x0218 0x046C 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO02__GPIO2_IO_BIT2                            0x0018 0x021C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO02__LPI2C4_SDA                               0x0018 0x021C 0x050C 0x11 0x00
+#define IMX95_PAD_GPIO_IO02__LPSPI6_SOUT                              0x0018 0x021C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO02__LPUART5_CTS_B                            0x0018 0x021C 0x056C 0x05 0x01
+#define IMX95_PAD_GPIO_IO02__LPI2C6_SDA                               0x0018 0x021C 0x051C 0x16 0x00
+#define IMX95_PAD_GPIO_IO02__FLEXIO1_FLEXIO_BIT2                      0x0018 0x021C 0x0470 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO03__GPIO2_IO_BIT3                            0x001C 0x0220 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO03__LPI2C4_SCL                               0x001C 0x0220 0x0508 0x11 0x00
+#define IMX95_PAD_GPIO_IO03__LPSPI6_SCK                               0x001C 0x0220 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO03__LPUART5_RTS_B                            0x001C 0x0220 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO03__LPI2C6_SCL                               0x001C 0x0220 0x0518 0x16 0x00
+#define IMX95_PAD_GPIO_IO03__FLEXIO1_FLEXIO_BIT3                      0x001C 0x0220 0x0474 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO04__GPIO2_IO_BIT4                            0x0020 0x0224 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO04__TPM3_CH0                                 0x0020 0x0224 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO04__AONMIX_TOP_PDM_CLK                       0x0020 0x0224 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO04__CAN4_TX                                  0x0020 0x0224 0x0000 0x03 0x00
+#define IMX95_PAD_GPIO_IO04__LPSPI7_PCS0                              0x0020 0x0224 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO04__LPUART6_TX                               0x0020 0x0224 0x0580 0x05 0x01
+#define IMX95_PAD_GPIO_IO04__LPI2C6_SDA                               0x0020 0x0224 0x051C 0x16 0x01
+#define IMX95_PAD_GPIO_IO04__FLEXIO1_FLEXIO_BIT4                      0x0020 0x0224 0x0478 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO05__GPIO2_IO_BIT5                            0x0024 0x0228 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO05__TPM4_CH0                                 0x0024 0x0228 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO05__AONMIX_TOP_PDM_BIT_STREAM_BIT0           0x0024 0x0228 0x040C 0x02 0x01
+#define IMX95_PAD_GPIO_IO05__CAN4_RX                                  0x0024 0x0228 0x044C 0x03 0x01
+#define IMX95_PAD_GPIO_IO05__LPSPI7_SIN                               0x0024 0x0228 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO05__LPUART6_RX                               0x0024 0x0228 0x057C 0x05 0x01
+#define IMX95_PAD_GPIO_IO05__LPI2C6_SCL                               0x0024 0x0228 0x0518 0x16 0x01
+#define IMX95_PAD_GPIO_IO05__FLEXIO1_FLEXIO_BIT5                      0x0024 0x0228 0x047C 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO06__GPIO2_IO_BIT6                            0x0028 0x022C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO06__TPM5_CH0                                 0x0028 0x022C 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO06__AONMIX_TOP_PDM_BIT_STREAM_BIT1           0x0028 0x022C 0x0410 0x02 0x01
+#define IMX95_PAD_GPIO_IO06__LPSPI7_SOUT                              0x0028 0x022C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO06__LPUART6_CTS_B                            0x0028 0x022C 0x0578 0x05 0x01
+#define IMX95_PAD_GPIO_IO06__LPI2C7_SDA                               0x0028 0x022C 0x0524 0x16 0x00
+#define IMX95_PAD_GPIO_IO06__FLEXIO1_FLEXIO_BIT6                      0x0028 0x022C 0x0480 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO07__GPIO2_IO_BIT7                            0x002C 0x0230 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO07__LPSPI3_PCS1                              0x002C 0x0230 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO07__LPSPI7_SCK                               0x002C 0x0230 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO07__LPUART6_RTS_B                            0x002C 0x0230 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO07__LPI2C7_SCL                               0x002C 0x0230 0x0520 0x16 0x00
+#define IMX95_PAD_GPIO_IO07__FLEXIO1_FLEXIO_BIT7                      0x002C 0x0230 0x0484 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO08__GPIO2_IO_BIT8                            0x0030 0x0234 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO08__LPSPI3_PCS0                              0x0030 0x0234 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO08__TPM6_CH0                                 0x0030 0x0234 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO08__LPUART7_TX                               0x0030 0x0234 0x0588 0x05 0x01
+#define IMX95_PAD_GPIO_IO08__LPI2C7_SDA                               0x0030 0x0234 0x0524 0x16 0x01
+#define IMX95_PAD_GPIO_IO08__FLEXIO1_FLEXIO_BIT8                      0x0030 0x0234 0x0488 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO09__GPIO2_IO_BIT9                            0x0034 0x0238 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO09__LPSPI3_SIN                               0x0034 0x0238 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO09__TPM3_EXTCLK                              0x0034 0x0238 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO09__LPUART7_RX                               0x0034 0x0238 0x0584 0x05 0x01
+#define IMX95_PAD_GPIO_IO09__LPI2C7_SCL                               0x0034 0x0238 0x0520 0x16 0x01
+#define IMX95_PAD_GPIO_IO09__FLEXIO1_FLEXIO_BIT9                      0x0034 0x0238 0x048C 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO10__GPIO2_IO_BIT10                           0x0038 0x023C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO10__LPSPI3_SOUT                              0x0038 0x023C 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO10__TPM4_EXTCLK                              0x0038 0x023C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO10__LPUART7_CTS_B                            0x0038 0x023C 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO10__LPI2C8_SDA                               0x0038 0x023C 0x052C 0x16 0x00
+#define IMX95_PAD_GPIO_IO10__FLEXIO1_FLEXIO_BIT10                     0x0038 0x023C 0x0490 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO11__GPIO2_IO_BIT11                           0x003C 0x0240 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO11__LPSPI3_SCK                               0x003C 0x0240 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO11__TPM5_EXTCLK                              0x003C 0x0240 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO11__LPUART7_RTS_B                            0x003C 0x0240 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO11__LPI2C8_SCL                               0x003C 0x0240 0x0528 0x16 0x00
+#define IMX95_PAD_GPIO_IO11__FLEXIO1_FLEXIO_BIT11                     0x003C 0x0240 0x0494 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO12__GPIO2_IO_BIT12                           0x0040 0x0244 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO12__TPM3_CH2                                 0x0040 0x0244 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO12__AONMIX_TOP_PDM_BIT_STREAM_BIT2           0x0040 0x0244 0x0414 0x02 0x00
+#define IMX95_PAD_GPIO_IO12__FLEXIO1_FLEXIO_BIT12                     0x0040 0x0244 0x0498 0x03 0x00
+#define IMX95_PAD_GPIO_IO12__LPSPI8_PCS0                              0x0040 0x0244 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO12__LPUART8_TX                               0x0040 0x0244 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO12__LPI2C8_SDA                               0x0040 0x0244 0x052C 0x16 0x01
+#define IMX95_PAD_GPIO_IO12__SAI3_RX_SYNC                             0x0040 0x0244 0x0590 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO13__GPIO2_IO_BIT13                           0x0044 0x0248 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO13__TPM4_CH2                                 0x0044 0x0248 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO13__AONMIX_TOP_PDM_BIT_STREAM_BIT3           0x0044 0x0248 0x0418 0x02 0x00
+#define IMX95_PAD_GPIO_IO13__LPSPI8_SIN                               0x0044 0x0248 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO13__LPUART8_RX                               0x0044 0x0248 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO13__LPI2C8_SCL                               0x0044 0x0248 0x0528 0x16 0x01
+#define IMX95_PAD_GPIO_IO13__FLEXIO1_FLEXIO_BIT13                     0x0044 0x0248 0x049C 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO14__GPIO2_IO_BIT14                           0x0048 0x024C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO14__LPUART3_TX                               0x0048 0x024C 0x055C 0x01 0x01
+#define IMX95_PAD_GPIO_IO14__LPSPI8_SOUT                              0x0048 0x024C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO14__LPUART8_CTS_B                            0x0048 0x024C 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO14__LPUART4_TX                               0x0048 0x024C 0x0568 0x06 0x01
+#define IMX95_PAD_GPIO_IO14__FLEXIO1_FLEXIO_BIT14                     0x0048 0x024C 0x04A0 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO15__GPIO2_IO_BIT15                           0x004C 0x0250 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO15__LPUART3_RX                               0x004C 0x0250 0x0558 0x01 0x01
+#define IMX95_PAD_GPIO_IO15__LPSPI8_SCK                               0x004C 0x0250 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO15__LPUART8_RTS_B                            0x004C 0x0250 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO15__LPUART4_RX                               0x004C 0x0250 0x0564 0x06 0x01
+#define IMX95_PAD_GPIO_IO15__FLEXIO1_FLEXIO_BIT15                     0x004C 0x0250 0x04A4 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO16__GPIO2_IO_BIT16                           0x0050 0x0254 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK                             0x0050 0x0254 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO16__AONMIX_TOP_PDM_BIT_STREAM_BIT2           0x0050 0x0254 0x0414 0x02 0x01
+#define IMX95_PAD_GPIO_IO16__LPUART3_CTS_B                            0x0050 0x0254 0x0554 0x04 0x01
+#define IMX95_PAD_GPIO_IO16__LPSPI4_PCS2                              0x0050 0x0254 0x0538 0x05 0x01
+#define IMX95_PAD_GPIO_IO16__LPUART4_CTS_B                            0x0050 0x0254 0x0560 0x06 0x01
+#define IMX95_PAD_GPIO_IO16__FLEXIO1_FLEXIO_BIT16                     0x0050 0x0254 0x04A8 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO17__GPIO2_IO_BIT17                           0x0054 0x0258 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO17__SAI3_MCLK                                0x0054 0x0258 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO17__LPUART3_RTS_B                            0x0054 0x0258 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO17__LPSPI4_PCS1                              0x0054 0x0258 0x0534 0x05 0x01
+#define IMX95_PAD_GPIO_IO17__LPUART4_RTS_B                            0x0054 0x0258 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO17__FLEXIO1_FLEXIO_BIT17                     0x0054 0x0258 0x04AC 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18                           0x0058 0x025C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO18__SAI3_RX_BCLK                             0x0058 0x025C 0x058C 0x01 0x00
+#define IMX95_PAD_GPIO_IO18__LPSPI5_PCS0                              0x0058 0x025C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO18__LPSPI4_PCS0                              0x0058 0x025C 0x0530 0x05 0x01
+#define IMX95_PAD_GPIO_IO18__TPM5_CH2                                 0x0058 0x025C 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO18__FLEXIO1_FLEXIO_BIT18                     0x0058 0x025C 0x04B0 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO19__GPIO2_IO_BIT19                           0x005C 0x0260 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO19__SAI3_RX_SYNC                             0x005C 0x0260 0x0590 0x01 0x01
+#define IMX95_PAD_GPIO_IO19__AONMIX_TOP_PDM_BIT_STREAM_BIT3           0x005C 0x0260 0x0418 0x02 0x01
+#define IMX95_PAD_GPIO_IO19__FLEXIO1_FLEXIO_BIT19                     0x005C 0x0260 0x04B4 0x03 0x00
+#define IMX95_PAD_GPIO_IO19__LPSPI5_SIN                               0x005C 0x0260 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO19__LPSPI4_SIN                               0x005C 0x0260 0x0540 0x05 0x01
+#define IMX95_PAD_GPIO_IO19__TPM6_CH2                                 0x005C 0x0260 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO19__SAI3_TX_DATA_BIT0                        0x005C 0x0260 0x0000 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO20__GPIO2_IO_BIT20                           0x0060 0x0264 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0                        0x0060 0x0264 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO20__AONMIX_TOP_PDM_BIT_STREAM_BIT0           0x0060 0x0264 0x040C 0x02 0x02
+#define IMX95_PAD_GPIO_IO20__LPSPI5_SOUT                              0x0060 0x0264 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO20__LPSPI4_SOUT                              0x0060 0x0264 0x0544 0x05 0x01
+#define IMX95_PAD_GPIO_IO20__TPM3_CH1                                 0x0060 0x0264 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO20__FLEXIO1_FLEXIO_BIT20                     0x0060 0x0264 0x04B8 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO21__GPIO2_IO_BIT21                           0x0064 0x0268 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0                        0x0064 0x0268 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO21__AONMIX_TOP_PDM_CLK                       0x0064 0x0268 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO21__FLEXIO1_FLEXIO_BIT21                     0x0064 0x0268 0x04BC 0x03 0x00
+#define IMX95_PAD_GPIO_IO21__LPSPI5_SCK                               0x0064 0x0268 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO21__LPSPI4_SCK                               0x0064 0x0268 0x053C 0x05 0x01
+#define IMX95_PAD_GPIO_IO21__TPM4_CH1                                 0x0064 0x0268 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO21__SAI3_RX_BCLK                             0x0064 0x0268 0x058C 0x07 0x01
+
+#define IMX95_PAD_GPIO_IO22__GPIO2_IO_BIT22                           0x0068 0x026C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO22__USDHC3_CLK                               0x0068 0x026C 0x05C8 0x01 0x00
+#define IMX95_PAD_GPIO_IO22__SPDIF_IN                                 0x0068 0x026C 0x0454 0x02 0x02
+#define IMX95_PAD_GPIO_IO22__CAN5_TX                                  0x0068 0x026C 0x0000 0x03 0x00
+#define IMX95_PAD_GPIO_IO22__TPM5_CH1                                 0x0068 0x026C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO22__TPM6_EXTCLK                              0x0068 0x026C 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO22__LPI2C5_SDA                               0x0068 0x026C 0x0514 0x16 0x01
+#define IMX95_PAD_GPIO_IO22__FLEXIO1_FLEXIO_BIT22                     0x0068 0x026C 0x04C0 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO23__GPIO2_IO_BIT23                           0x006C 0x0270 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO23__USDHC3_CMD                               0x006C 0x0270 0x05CC 0x01 0x00
+#define IMX95_PAD_GPIO_IO23__SPDIF_OUT                                0x006C 0x0270 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO23__CAN5_RX                                  0x006C 0x0270 0x0450 0x03 0x00
+#define IMX95_PAD_GPIO_IO23__TPM6_CH1                                 0x006C 0x0270 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO23__LPI2C5_SCL                               0x006C 0x0270 0x0510 0x16 0x01
+#define IMX95_PAD_GPIO_IO23__FLEXIO1_FLEXIO_BIT23                     0x006C 0x0270 0x04C4 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO24__GPIO2_IO_BIT24                           0x0070 0x0274 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO24__USDHC3_DATA0                             0x0070 0x0274 0x05D0 0x01 0x00
+#define IMX95_PAD_GPIO_IO24__TPM3_CH3                                 0x0070 0x0274 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO24__JTAG_MUX_TDO                             0x0070 0x0274 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO24__LPSPI6_PCS1                              0x0070 0x0274 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO24__FLEXIO1_FLEXIO_BIT24                     0x0070 0x0274 0x04C8 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO25__GPIO2_IO_BIT25                           0x0074 0x0278 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO25__USDHC3_DATA1                             0x0074 0x0278 0x05D4 0x01 0x00
+#define IMX95_PAD_GPIO_IO25__CAN2_TX                                  0x0074 0x0278 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO25__TPM4_CH3                                 0x0074 0x0278 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO25__JTAG_MUX_TCK                             0x0074 0x0278 0x060C 0x05 0x01
+#define IMX95_PAD_GPIO_IO25__LPSPI7_PCS1                              0x0074 0x0278 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO25__FLEXIO1_FLEXIO_BIT25                     0x0074 0x0278 0x04CC 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO26__GPIO2_IO_BIT26                           0x0078 0x027C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO26__USDHC3_DATA2                             0x0078 0x027C 0x05D8 0x01 0x00
+#define IMX95_PAD_GPIO_IO26__AONMIX_TOP_PDM_BIT_STREAM_BIT1           0x0078 0x027C 0x0410 0x02 0x02
+#define IMX95_PAD_GPIO_IO26__FLEXIO1_FLEXIO_BIT26                     0x0078 0x027C 0x0458 0x03 0x01
+#define IMX95_PAD_GPIO_IO26__TPM5_CH3                                 0x0078 0x027C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO26__JTAG_MUX_TDI                             0x0078 0x027C 0x0610 0x05 0x01
+#define IMX95_PAD_GPIO_IO26__LPSPI8_PCS1                              0x0078 0x027C 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC                             0x0078 0x027C 0x0000 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO27__GPIO2_IO_BIT27                           0x007C 0x0280 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO27__USDHC3_DATA3                             0x007C 0x0280 0x05DC 0x01 0x00
+#define IMX95_PAD_GPIO_IO27__CAN2_RX                                  0x007C 0x0280 0x0444 0x02 0x02
+#define IMX95_PAD_GPIO_IO27__TPM6_CH3                                 0x007C 0x0280 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO27__JTAG_MUX_TMS                             0x007C 0x0280 0x0614 0x05 0x01
+#define IMX95_PAD_GPIO_IO27__LPSPI5_PCS1                              0x007C 0x0280 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO27__FLEXIO1_FLEXIO_BIT27                     0x007C 0x0280 0x045C 0x07 0x01
+
+#define IMX95_PAD_GPIO_IO28__GPIO2_IO_BIT28                           0x0080 0x0284 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO28__LPI2C3_SDA                               0x0080 0x0284 0x0504 0x11 0x01
+#define IMX95_PAD_GPIO_IO28__CAN3_TX                                  0x0080 0x0284 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO28__FLEXIO1_FLEXIO_BIT28                     0x0080 0x0284 0x0000 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO29__GPIO2_IO_BIT29                           0x0084 0x0288 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO29__LPI2C3_SCL                               0x0084 0x0288 0x0500 0x11 0x01
+#define IMX95_PAD_GPIO_IO29__CAN3_RX                                  0x0084 0x0288 0x0448 0x02 0x01
+#define IMX95_PAD_GPIO_IO29__FLEXIO1_FLEXIO_BIT29                     0x0084 0x0288 0x0000 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO30__GPIO2_IO_BIT30                           0x0088 0x028C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO30__LPI2C4_SDA                               0x0088 0x028C 0x050C 0x11 0x01
+#define IMX95_PAD_GPIO_IO30__CAN5_TX                                  0x0088 0x028C 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO30__FLEXIO1_FLEXIO_BIT30                     0x0088 0x028C 0x0460 0x07 0x01
+
+#define IMX95_PAD_GPIO_IO31__GPIO2_IO_BIT31                           0x008C 0x0290 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO31__LPI2C4_SCL                               0x008C 0x0290 0x0508 0x11 0x01
+#define IMX95_PAD_GPIO_IO31__CAN5_RX                                  0x008C 0x0290 0x0450 0x02 0x01
+#define IMX95_PAD_GPIO_IO31__FLEXIO1_FLEXIO_BIT31                     0x008C 0x0290 0x0464 0x07 0x01
+
+#define IMX95_PAD_GPIO_IO32__GPIO5_IO_BIT12                           0x0090 0x0294 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B               0x0090 0x0294 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO32__LPUART6_TX                               0x0090 0x0294 0x0580 0x02 0x00
+#define IMX95_PAD_GPIO_IO32__LPSPI4_PCS2                              0x0090 0x0294 0x0538 0x04 0x00
+
+#define IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13                           0x0094 0x0298 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO33__LPUART6_RX                               0x0094 0x0298 0x057C 0x02 0x00
+#define IMX95_PAD_GPIO_IO33__LPSPI4_PCS1                              0x0094 0x0298 0x0534 0x04 0x00
+
+#define IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14                           0x0098 0x029C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO34__LPUART6_CTS_B                            0x0098 0x029C 0x0578 0x02 0x00
+#define IMX95_PAD_GPIO_IO34__LPSPI4_PCS0                              0x0098 0x029C 0x0530 0x04 0x00
+
+#define IMX95_PAD_GPIO_IO35__GPIO5_IO_BIT15                           0x009C 0x02A0 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B               0x009C 0x02A0 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO35__LPUART6_RTS_B                            0x009C 0x02A0 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO35__LPSPI4_SIN                               0x009C 0x02A0 0x0540 0x04 0x00
+
+#define IMX95_PAD_GPIO_IO36__LPSPI4_SOUT                              0x00A0 0x02A4 0x0544 0x04 0x00
+#define IMX95_PAD_GPIO_IO36__GPIO5_IO_BIT16                           0x00A0 0x02A4 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO36__LPUART7_TX                               0x00A0 0x02A4 0x0588 0x02 0x00
+
+#define IMX95_PAD_GPIO_IO37__GPIO5_IO_BIT17                           0x00A4 0x02A8 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO37__LPUART7_RX                               0x00A4 0x02A8 0x0584 0x02 0x00
+#define IMX95_PAD_GPIO_IO37__LPSPI4_SCK                               0x00A4 0x02A8 0x053C 0x04 0x00
+
+#define IMX95_PAD_CCM_CLKO1__CCMSRCGPCMIX_TOP_CLKO_1                  0x00A8 0x02AC 0x0000 0x00 0x00
+#define IMX95_PAD_CCM_CLKO1__NETCMIX_TOP_NETC_TMR_1588_TRIG1          0x00A8 0x02AC 0x0434 0x01 0x00
+#define IMX95_PAD_CCM_CLKO1__FLEXIO1_FLEXIO_BIT26                     0x00A8 0x02AC 0x0458 0x04 0x00
+#define IMX95_PAD_CCM_CLKO1__GPIO3_IO_BIT26                           0x00A8 0x02AC 0x0000 0x05 0x00
+
+#define IMX95_PAD_CCM_CLKO2__GPIO3_IO_BIT27                           0x00AC 0x02B0 0x0000 0x05 0x00
+#define IMX95_PAD_CCM_CLKO2__CCMSRCGPCMIX_TOP_CLKO_2                  0x00AC 0x02B0 0x0000 0x00 0x00
+#define IMX95_PAD_CCM_CLKO2__NETCMIX_TOP_NETC_TMR_1588_PP1            0x00AC 0x02B0 0x0000 0x01 0x00
+#define IMX95_PAD_CCM_CLKO2__FLEXIO1_FLEXIO_BIT27                     0x00AC 0x02B0 0x045C 0x04 0x00
+
+#define IMX95_PAD_CCM_CLKO3__CCMSRCGPCMIX_TOP_CLKO_3                  0x00B0 0x02B4 0x0000 0x00 0x00
+#define IMX95_PAD_CCM_CLKO3__NETCMIX_TOP_NETC_TMR_1588_TRIG2          0x00B0 0x02B4 0x0438 0x01 0x00
+#define IMX95_PAD_CCM_CLKO3__CAN3_TX                                  0x00B0 0x02B4 0x0000 0x02 0x00
+#define IMX95_PAD_CCM_CLKO3__FLEXIO2_FLEXIO_BIT28                     0x00B0 0x02B4 0x0000 0x04 0x00
+#define IMX95_PAD_CCM_CLKO3__GPIO4_IO_BIT28                           0x00B0 0x02B4 0x0000 0x05 0x00
+
+#define IMX95_PAD_CCM_CLKO4__CCMSRCGPCMIX_TOP_CLKO_4                  0x00B4 0x02B8 0x0000 0x00 0x00
+#define IMX95_PAD_CCM_CLKO4__NETCMIX_TOP_NETC_TMR_1588_PP2            0x00B4 0x02B8 0x0000 0x01 0x00
+#define IMX95_PAD_CCM_CLKO4__CAN3_RX                                  0x00B4 0x02B8 0x0448 0x02 0x00
+#define IMX95_PAD_CCM_CLKO4__FLEXIO2_FLEXIO_BIT29                     0x00B4 0x02B8 0x0000 0x04 0x00
+#define IMX95_PAD_CCM_CLKO4__GPIO4_IO_BIT29                           0x00B4 0x02B8 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC                     0x00B8 0x02BC 0x0424 0x00 0x00
+#define IMX95_PAD_ENET1_MDC__LPUART3_DCD_B                            0x00B8 0x02BC 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_MDC__I3C2_SCL                                 0x00B8 0x02BC 0x04F8 0x02 0x00
+#define IMX95_PAD_ENET1_MDC__HSIOMIX_TOP_USB1_OTG_ID                  0x00B8 0x02BC 0x0000 0x03 0x00
+#define IMX95_PAD_ENET1_MDC__FLEXIO2_FLEXIO_BIT0                      0x00B8 0x02BC 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_MDC__GPIO4_IO_BIT0                            0x00B8 0x02BC 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO                   0x00BC 0x02C0 0x0428 0x00 0x00
+#define IMX95_PAD_ENET1_MDIO__LPUART3_RIN_B                           0x00BC 0x02C0 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_MDIO__I3C2_SDA                                0x00BC 0x02C0 0x04FC 0x02 0x00
+#define IMX95_PAD_ENET1_MDIO__HSIOMIX_TOP_USB1_OTG_PWR                0x00BC 0x02C0 0x0000 0x03 0x00
+#define IMX95_PAD_ENET1_MDIO__FLEXIO2_FLEXIO_BIT1                     0x00BC 0x02C0 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_MDIO__GPIO4_IO_BIT1                           0x00BC 0x02C0 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3               0x00C0 0x02C4 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_TD3__CAN2_TX                                  0x00C0 0x02C4 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_TD3__HSIOMIX_TOP_USB2_OTG_ID                  0x00C0 0x02C4 0x0000 0x03 0x00
+#define IMX95_PAD_ENET1_TD3__FLEXIO2_FLEXIO_BIT2                      0x00C0 0x02C4 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_TD3__GPIO4_IO_BIT2                            0x00C0 0x02C4 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2               0x00C4 0x02C8 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RMII_REF50_CLK          0x00C4 0x02C8 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_TD2__CAN2_RX                                  0x00C4 0x02C8 0x0444 0x02 0x01
+#define IMX95_PAD_ENET1_TD2__HSIOMIX_TOP_USB2_OTG_OC                  0x00C4 0x02C8 0x0000 0x03 0x00
+#define IMX95_PAD_ENET1_TD2__FLEXIO2_FLEXIO_BIT3                      0x00C4 0x02C8 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_TD2__GPIO4_IO_BIT3                            0x00C4 0x02C8 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1               0x00C8 0x02CC 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_TD1__LPUART3_RTS_B                            0x00C8 0x02CC 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_TD1__I3C2_PUR                                 0x00C8 0x02CC 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_TD1__HSIOMIX_TOP_USB1_OTG_OC                  0x00C8 0x02CC 0x0000 0x03 0x00
+#define IMX95_PAD_ENET1_TD1__FLEXIO2_FLEXIO_BIT4                      0x00C8 0x02CC 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_TD1__GPIO4_IO_BIT4                            0x00C8 0x02CC 0x0000 0x05 0x00
+#define IMX95_PAD_ENET1_TD1__I3C2_PUR_B                               0x00C8 0x02CC 0x0000 0x06 0x00
+#define IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RMII_TXD1               0x00C8 0x02CC 0x0000 0x07 0x00
+
+#define IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0               0x00CC 0x02D0 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_TD0__LPUART3_TX                               0x00CC 0x02D0 0x055C 0x01 0x00
+#define IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RMII_TXD0               0x00CC 0x02D0 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_TD0__FLEXIO2_FLEXIO_BIT5                      0x00CC 0x02D0 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_TD0__GPIO4_IO_BIT5                            0x00CC 0x02D0 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL         0x00D0 0x02D4 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_TX_CTL__LPUART3_DTR_B                         0x00D0 0x02D4 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RMII_TX_EN           0x00D0 0x02D4 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO_BIT6                   0x00D0 0x02D4 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_TX_CTL__GPIO4_IO_BIT6                         0x00D0 0x02D4 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK            0x00D4 0x02D8 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_TXC__CCMSRCGPCMIX_TOP_ENET_CLK_ROOT           0x00D4 0x02D8 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_TXC__FLEXIO2_FLEXIO_BIT7                      0x00D4 0x02D8 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_TXC__GPIO4_IO_BIT7                            0x00D4 0x02D8 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL         0x00D8 0x02DC 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_RX_CTL__LPUART3_DSR_B                         0x00D8 0x02DC 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RMII_CRS_DV          0x00D8 0x02DC 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_RX_CTL__HSIOMIX_TOP_USB2_OTG_PWR              0x00D8 0x02DC 0x0000 0x03 0x00
+#define IMX95_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO_BIT8                   0x00D8 0x02DC 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_RX_CTL__GPIO4_IO_BIT8                         0x00D8 0x02DC 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK            0x00DC 0x02E0 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RMII_RX_ER              0x00DC 0x02E0 0x042C 0x01 0x00
+#define IMX95_PAD_ENET1_RXC__FLEXIO2_FLEXIO_BIT9                      0x00DC 0x02E0 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_RXC__GPIO4_IO_BIT9                            0x00DC 0x02E0 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0               0x00E0 0x02E4 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_RD0__LPUART3_RX                               0x00E0 0x02E4 0x0558 0x01 0x00
+#define IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RMII_RXD0               0x00E0 0x02E4 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_RD0__FLEXIO2_FLEXIO_BIT10                     0x00E0 0x02E4 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_RD0__GPIO4_IO_BIT10                           0x00E0 0x02E4 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1               0x00E4 0x02E8 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_RD1__LPUART3_CTS_B                            0x00E4 0x02E8 0x0554 0x01 0x00
+#define IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RMII_RXD1               0x00E4 0x02E8 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_RD1__LPTMR2_ALT1                              0x00E4 0x02E8 0x0548 0x03 0x00
+#define IMX95_PAD_ENET1_RD1__FLEXIO2_FLEXIO_BIT11                     0x00E4 0x02E8 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_RD1__GPIO4_IO_BIT11                           0x00E4 0x02E8 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2               0x00E8 0x02EC 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RMII_RX_ER              0x00E8 0x02EC 0x042C 0x02 0x01
+#define IMX95_PAD_ENET1_RD2__LPTMR2_ALT2                              0x00E8 0x02EC 0x054C 0x03 0x00
+#define IMX95_PAD_ENET1_RD2__FLEXIO2_FLEXIO_BIT12                     0x00E8 0x02EC 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_RD2__GPIO4_IO_BIT12                           0x00E8 0x02EC 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3               0x00EC 0x02F0 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_RD3__LPTMR2_ALT3                              0x00EC 0x02F0 0x0550 0x03 0x00
+#define IMX95_PAD_ENET1_RD3__FLEXIO2_FLEXIO_BIT13                     0x00EC 0x02F0 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_RD3__GPIO4_IO_BIT13                           0x00EC 0x02F0 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC                     0x00F0 0x02F4 0x0424 0x00 0x01
+#define IMX95_PAD_ENET2_MDC__LPUART4_DCD_B                            0x00F0 0x02F4 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_MDC__NETCMIX_TOP_SAI2_RX_SYNC                 0x00F0 0x02F4 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_MDC__FLEXIO2_FLEXIO_BIT14                     0x00F0 0x02F4 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_MDC__GPIO4_IO_BIT14                           0x00F0 0x02F4 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO                   0x00F4 0x02F8 0x0428 0x00 0x01
+#define IMX95_PAD_ENET2_MDIO__LPUART4_RIN_B                           0x00F4 0x02F8 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_SAI2_RX_BCLK                0x00F4 0x02F8 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_MDIO__FLEXIO2_FLEXIO_BIT15                    0x00F4 0x02F8 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_MDIO__GPIO4_IO_BIT15                          0x00F4 0x02F8 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_TD3__NETCMIX_TOP_SAI2_RX_DATA_BIT0            0x00F8 0x02FC 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_TD3__FLEXIO2_FLEXIO_BIT16                     0x00F8 0x02FC 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_TD3__GPIO4_IO_BIT16                           0x00F8 0x02FC 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3               0x00F8 0x02FC 0x0000 0x00 0x00
+
+#define IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2               0x00FC 0x0300 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RMII_REF50_CLK          0x00FC 0x0300 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_TD2__NETCMIX_TOP_SAI2_RX_DATA_BIT1            0x00FC 0x0300 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_TD2__SAI4_TX_SYNC                             0x00FC 0x0300 0x05A4 0x03 0x00
+#define IMX95_PAD_ENET2_TD2__FLEXIO2_FLEXIO_BIT17                     0x00FC 0x0300 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_TD2__GPIO4_IO_BIT17                           0x00FC 0x0300 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1               0x0100 0x0304 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_TD1__LPUART4_RTS_B                            0x0100 0x0304 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_TD1__NETCMIX_TOP_SAI2_RX_DATA_BIT2            0x0100 0x0304 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_TD1__SAI4_TX_BCLK                             0x0100 0x0304 0x05A0 0x03 0x00
+#define IMX95_PAD_ENET2_TD1__FLEXIO2_FLEXIO_BIT18                     0x0100 0x0304 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_TD1__GPIO4_IO_BIT18                           0x0100 0x0304 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RMII_TXD1               0x0100 0x0304 0x0000 0x06 0x00
+
+#define IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0               0x0104 0x0308 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_TD0__LPUART4_TX                               0x0104 0x0308 0x0568 0x01 0x00
+#define IMX95_PAD_ENET2_TD0__NETCMIX_TOP_SAI2_RX_DATA_BIT3            0x0104 0x0308 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_TD0__SAI4_TX_DATA_BIT0                        0x0104 0x0308 0x0000 0x03 0x00
+#define IMX95_PAD_ENET2_TD0__FLEXIO2_FLEXIO_BIT19                     0x0104 0x0308 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_TD0__GPIO4_IO_BIT19                           0x0104 0x0308 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RMII_TXD0               0x0104 0x0308 0x0000 0x06 0x00
+
+#define IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL         0x0108 0x030C 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_TX_CTL__LPUART4_DTR_B                         0x0108 0x030C 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_SAI2_TX_SYNC              0x0108 0x030C 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RMII_TX_EN           0x0108 0x030C 0x0000 0x03 0x00
+#define IMX95_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO_BIT20                  0x0108 0x030C 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_TX_CTL__GPIO4_IO_BIT20                        0x0108 0x030C 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK            0x010C 0x0310 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_TXC__CCMSRCGPCMIX_TOP_ENET_CLK_ROOT           0x010C 0x0310 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_TXC__NETCMIX_TOP_SAI2_TX_BCLK                 0x010C 0x0310 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_TXC__FLEXIO2_FLEXIO_BIT21                     0x010C 0x0310 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_TXC__GPIO4_IO_BIT21                           0x010C 0x0310 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL         0x0110 0x0314 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_RX_CTL__LPUART4_DSR_B                         0x0110 0x0314 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_SAI2_TX_DATA_BIT0         0x0110 0x0314 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO_BIT22                  0x0110 0x0314 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_RX_CTL__GPIO4_IO_BIT22                        0x0110 0x0314 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RMII_CRS_DV          0x0110 0x0314 0x0000 0x06 0x00
+
+#define IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK            0x0114 0x0318 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RMII_RX_ER              0x0114 0x0318 0x0430 0x01 0x00
+#define IMX95_PAD_ENET2_RXC__NETCMIX_TOP_SAI2_TX_DATA_BIT1            0x0114 0x0318 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_RXC__SAI4_RX_SYNC                             0x0114 0x0318 0x059C 0x03 0x00
+#define IMX95_PAD_ENET2_RXC__FLEXIO2_FLEXIO_BIT23                     0x0114 0x0318 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_RXC__GPIO4_IO_BIT23                           0x0114 0x0318 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0               0x0118 0x031C 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_RD0__LPUART4_RX                               0x0118 0x031C 0x0564 0x01 0x00
+#define IMX95_PAD_ENET2_RD0__NETCMIX_TOP_SAI2_TX_DATA_BIT2            0x0118 0x031C 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_RD0__SAI4_RX_BCLK                             0x0118 0x031C 0x0594 0x03 0x00
+#define IMX95_PAD_ENET2_RD0__FLEXIO2_FLEXIO_BIT24                     0x0118 0x031C 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_RD0__GPIO4_IO_BIT24                           0x0118 0x031C 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RMII_RXD0               0x0118 0x031C 0x0000 0x06 0x00
+
+#define IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1               0x011C 0x0320 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_RD1__SPDIF_IN                                 0x011C 0x0320 0x0454 0x01 0x00
+#define IMX95_PAD_ENET2_RD1__NETCMIX_TOP_SAI2_TX_DATA_BIT3            0x011C 0x0320 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_RD1__SAI4_RX_DATA_BIT0                        0x011C 0x0320 0x0598 0x03 0x00
+#define IMX95_PAD_ENET2_RD1__FLEXIO2_FLEXIO_BIT25                     0x011C 0x0320 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_RD1__GPIO4_IO_BIT25                           0x011C 0x0320 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RMII_RXD1               0x011C 0x0320 0x0000 0x06 0x00
+
+#define IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2               0x0120 0x0324 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_RD2__LPUART4_CTS_B                            0x0120 0x0324 0x0560 0x01 0x00
+#define IMX95_PAD_ENET2_RD2__NETCMIX_TOP_SAI2_MCLK                    0x0120 0x0324 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_RD2__NETCMIX_TOP_MQS2_RIGHT                   0x0120 0x0324 0x0000 0x03 0x00
+#define IMX95_PAD_ENET2_RD2__FLEXIO2_FLEXIO_BIT26                     0x0120 0x0324 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_RD2__GPIO4_IO_BIT26                           0x0120 0x0324 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RMII_RX_ER              0x0120 0x0324 0x0430 0x06 0x01
+
+#define IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3               0x0124 0x0328 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_RD3__SPDIF_OUT                                0x0124 0x0328 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_RD3__SPDIF_IN                                 0x0124 0x0328 0x0454 0x02 0x01
+#define IMX95_PAD_ENET2_RD3__NETCMIX_TOP_MQS2_LEFT                    0x0124 0x0328 0x0000 0x03 0x00
+#define IMX95_PAD_ENET2_RD3__FLEXIO2_FLEXIO_BIT27                     0x0124 0x0328 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_RD3__GPIO4_IO_BIT27                           0x0124 0x0328 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD1_CLK__FLEXIO1_FLEXIO_BIT8                        0x0128 0x032C 0x0488 0x04 0x01
+#define IMX95_PAD_SD1_CLK__GPIO3_IO_BIT8                              0x0128 0x032C 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_CLK__USDHC1_CLK                                 0x0128 0x032C 0x0000 0x00 0x00
+
+#define IMX95_PAD_SD1_CMD__USDHC1_CMD                                 0x012C 0x0330 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_CMD__FLEXIO1_FLEXIO_BIT9                        0x012C 0x0330 0x048C 0x04 0x01
+#define IMX95_PAD_SD1_CMD__GPIO3_IO_BIT9                              0x012C 0x0330 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD1_DATA0__USDHC1_DATA0                             0x0130 0x0334 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA0__FLEXIO1_FLEXIO_BIT10                     0x0130 0x0334 0x0490 0x04 0x01
+#define IMX95_PAD_SD1_DATA0__GPIO3_IO_BIT10                           0x0130 0x0334 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD1_DATA1__USDHC1_DATA1                             0x0134 0x0338 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA1__FLEXIO1_FLEXIO_BIT11                     0x0134 0x0338 0x0494 0x04 0x01
+#define IMX95_PAD_SD1_DATA1__GPIO3_IO_BIT11                           0x0134 0x0338 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD1_DATA2__USDHC1_DATA2                             0x0138 0x033C 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA2__FLEXIO1_FLEXIO_BIT12                     0x0138 0x033C 0x0498 0x04 0x01
+#define IMX95_PAD_SD1_DATA2__GPIO3_IO_BIT12                           0x0138 0x033C 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_DATA2__CCMSRCGPCMIX_TOP_PMIC_READY              0x0138 0x033C 0x0000 0x06 0x00
+
+#define IMX95_PAD_SD1_DATA3__USDHC1_DATA3                             0x013C 0x0340 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B                         0x013C 0x0340 0x0000 0x01 0x00
+#define IMX95_PAD_SD1_DATA3__FLEXIO1_FLEXIO_BIT13                     0x013C 0x0340 0x049C 0x04 0x01
+#define IMX95_PAD_SD1_DATA3__GPIO3_IO_BIT13                           0x013C 0x0340 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD1_DATA4__USDHC1_DATA4                             0x0140 0x0344 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA4__FLEXSPI1_A_DATA_BIT4                     0x0140 0x0344 0x04E4 0x01 0x00
+#define IMX95_PAD_SD1_DATA4__FLEXIO1_FLEXIO_BIT14                     0x0140 0x0344 0x04A0 0x04 0x01
+#define IMX95_PAD_SD1_DATA4__GPIO3_IO_BIT14                           0x0140 0x0344 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_DATA4__XSPI_DATA_BIT4                           0x0140 0x0344 0x05FC 0x06 0x00
+
+#define IMX95_PAD_SD1_DATA5__USDHC1_DATA5                             0x0144 0x0348 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA5__FLEXSPI1_A_DATA_BIT5                     0x0144 0x0348 0x04E8 0x01 0x00
+#define IMX95_PAD_SD1_DATA5__USDHC1_RESET_B                           0x0144 0x0348 0x0000 0x02 0x00
+#define IMX95_PAD_SD1_DATA5__FLEXIO1_FLEXIO_BIT15                     0x0144 0x0348 0x04A4 0x04 0x01
+#define IMX95_PAD_SD1_DATA5__GPIO3_IO_BIT15                           0x0144 0x0348 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_DATA5__XSPI_DATA_BIT5                           0x0144 0x0348 0x0600 0x06 0x00
+
+#define IMX95_PAD_SD1_DATA6__USDHC1_DATA6                             0x0148 0x034C 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA6__FLEXSPI1_A_DATA_BIT6                     0x0148 0x034C 0x04EC 0x01 0x00
+#define IMX95_PAD_SD1_DATA6__USDHC1_CD_B                              0x0148 0x034C 0x0000 0x02 0x00
+#define IMX95_PAD_SD1_DATA6__FLEXIO1_FLEXIO_BIT16                     0x0148 0x034C 0x04A8 0x04 0x01
+#define IMX95_PAD_SD1_DATA6__GPIO3_IO_BIT16                           0x0148 0x034C 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_DATA6__XSPI_DATA_BIT6                           0x0148 0x034C 0x0604 0x06 0x00
+
+#define IMX95_PAD_SD1_DATA7__USDHC1_DATA7                             0x014C 0x0350 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA7__FLEXSPI1_A_DATA_BIT7                     0x014C 0x0350 0x04F0 0x01 0x00
+#define IMX95_PAD_SD1_DATA7__USDHC1_WP                                0x014C 0x0350 0x0000 0x02 0x00
+#define IMX95_PAD_SD1_DATA7__FLEXIO1_FLEXIO_BIT17                     0x014C 0x0350 0x04AC 0x04 0x01
+#define IMX95_PAD_SD1_DATA7__GPIO3_IO_BIT17                           0x014C 0x0350 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_DATA7__XSPI_DATA_BIT7                           0x014C 0x0350 0x0608 0x06 0x00
+
+#define IMX95_PAD_SD1_STROBE__USDHC1_STROBE                           0x0150 0x0354 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_STROBE__FLEXSPI1_A_DQS                          0x0150 0x0354 0x04D0 0x01 0x00
+#define IMX95_PAD_SD1_STROBE__FLEXIO1_FLEXIO_BIT18                    0x0150 0x0354 0x04B0 0x04 0x01
+#define IMX95_PAD_SD1_STROBE__GPIO3_IO_BIT18                          0x0150 0x0354 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_STROBE__XSPI_DQS                                0x0150 0x0354 0x05E4 0x06 0x00
+
+#define IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT                         0x0154 0x0358 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_VSELECT__USDHC2_WP                              0x0154 0x0358 0x0000 0x01 0x00
+#define IMX95_PAD_SD2_VSELECT__LPTMR2_ALT3                            0x0154 0x0358 0x0550 0x02 0x01
+#define IMX95_PAD_SD2_VSELECT__FLEXIO1_FLEXIO_BIT19                   0x0154 0x0358 0x04B4 0x04 0x01
+#define IMX95_PAD_SD2_VSELECT__GPIO3_IO_BIT19                         0x0154 0x0358 0x0000 0x05 0x00
+#define IMX95_PAD_SD2_VSELECT__CCMSRCGPCMIX_TOP_EXT_CLK1              0x0154 0x0358 0x0420 0x06 0x01
+
+#define IMX95_PAD_SD3_CLK__USDHC3_CLK                                 0x0158 0x035C 0x05C8 0x00 0x01
+#define IMX95_PAD_SD3_CLK__FLEXSPI1_A_SCLK                            0x0158 0x035C 0x04F4 0x01 0x00
+#define IMX95_PAD_SD3_CLK__SAI5_TX_DATA_BIT1                          0x0158 0x035C 0x0000 0x02 0x00
+#define IMX95_PAD_SD3_CLK__SAI5_RX_DATA_BIT0                          0x0158 0x035C 0x05AC 0x03 0x00
+#define IMX95_PAD_SD3_CLK__FLEXIO1_FLEXIO_BIT20                       0x0158 0x035C 0x04B8 0x04 0x01
+#define IMX95_PAD_SD3_CLK__GPIO3_IO_BIT20                             0x0158 0x035C 0x0000 0x05 0x00
+#define IMX95_PAD_SD3_CLK__XSPI_CLK                                   0x0158 0x035C 0x05E8 0x06 0x00
+
+#define IMX95_PAD_SD3_CMD__USDHC3_CMD                                 0x015C 0x0360 0x05CC 0x00 0x01
+#define IMX95_PAD_SD3_CMD__FLEXSPI1_A_SS0_B                           0x015C 0x0360 0x0000 0x01 0x00
+#define IMX95_PAD_SD3_CMD__SAI5_TX_DATA_BIT2                          0x015C 0x0360 0x0000 0x02 0x00
+#define IMX95_PAD_SD3_CMD__SAI5_RX_SYNC                               0x015C 0x0360 0x05BC 0x03 0x00
+#define IMX95_PAD_SD3_CMD__FLEXIO1_FLEXIO_BIT21                       0x015C 0x0360 0x04BC 0x04 0x01
+#define IMX95_PAD_SD3_CMD__GPIO3_IO_BIT21                             0x015C 0x0360 0x0000 0x05 0x00
+#define IMX95_PAD_SD3_CMD__XSPI_CS                                    0x015C 0x0360 0x05E0 0x06 0x00
+
+#define IMX95_PAD_SD3_DATA0__USDHC3_DATA0                             0x0160 0x0364 0x05D0 0x00 0x01
+#define IMX95_PAD_SD3_DATA0__FLEXSPI1_A_DATA_BIT0                     0x0160 0x0364 0x04D4 0x01 0x00
+#define IMX95_PAD_SD3_DATA0__SAI5_TX_DATA_BIT3                        0x0160 0x0364 0x0000 0x02 0x00
+#define IMX95_PAD_SD3_DATA0__SAI5_RX_BCLK                             0x0160 0x0364 0x05A8 0x03 0x00
+#define IMX95_PAD_SD3_DATA0__FLEXIO1_FLEXIO_BIT22                     0x0160 0x0364 0x04C0 0x04 0x01
+#define IMX95_PAD_SD3_DATA0__GPIO3_IO_BIT22                           0x0160 0x0364 0x0000 0x05 0x00
+#define IMX95_PAD_SD3_DATA0__XSPI_DATA_BIT0                           0x0160 0x0364 0x05EC 0x06 0x00
+
+#define IMX95_PAD_SD3_DATA1__USDHC3_DATA1                             0x0164 0x0368 0x05D4 0x00 0x01
+#define IMX95_PAD_SD3_DATA1__FLEXSPI1_A_DATA_BIT1                     0x0164 0x0368 0x04D8 0x01 0x00
+#define IMX95_PAD_SD3_DATA1__SAI5_RX_DATA_BIT1                        0x0164 0x0368 0x05B0 0x02 0x00
+#define IMX95_PAD_SD3_DATA1__SAI5_TX_DATA_BIT0                        0x0164 0x0368 0x0000 0x03 0x00
+#define IMX95_PAD_SD3_DATA1__FLEXIO1_FLEXIO_BIT23                     0x0164 0x0368 0x04C4 0x04 0x01
+#define IMX95_PAD_SD3_DATA1__GPIO3_IO_BIT23                           0x0164 0x0368 0x0000 0x05 0x00
+#define IMX95_PAD_SD3_DATA1__XSPI_DATA_BIT1                           0x0164 0x0368 0x05F0 0x06 0x00
+
+#define IMX95_PAD_SD3_DATA2__USDHC3_DATA2                             0x0168 0x036C 0x05D8 0x00 0x01
+#define IMX95_PAD_SD3_DATA2__FLEXSPI1_A_DATA_BIT2                     0x0168 0x036C 0x04DC 0x01 0x00
+#define IMX95_PAD_SD3_DATA2__SAI5_RX_DATA_BIT2                        0x0168 0x036C 0x05B4 0x02 0x00
+#define IMX95_PAD_SD3_DATA2__SAI5_TX_SYNC                             0x0168 0x036C 0x05C4 0x03 0x00
+#define IMX95_PAD_SD3_DATA2__FLEXIO1_FLEXIO_BIT24                     0x0168 0x036C 0x04C8 0x04 0x01
+#define IMX95_PAD_SD3_DATA2__GPIO3_IO_BIT24                           0x0168 0x036C 0x0000 0x05 0x00
+#define IMX95_PAD_SD3_DATA2__XSPI_DATA_BIT2                           0x0168 0x036C 0x05F4 0x06 0x00
+
+#define IMX95_PAD_SD3_DATA3__USDHC3_DATA3                             0x016C 0x0370 0x05DC 0x00 0x01
+#define IMX95_PAD_SD3_DATA3__FLEXSPI1_A_DATA_BIT3                     0x016C 0x0370 0x04E0 0x01 0x00
+#define IMX95_PAD_SD3_DATA3__SAI5_RX_DATA_BIT3                        0x016C 0x0370 0x05B8 0x02 0x00
+#define IMX95_PAD_SD3_DATA3__SAI5_TX_BCLK                             0x016C 0x0370 0x05C0 0x03 0x00
+#define IMX95_PAD_SD3_DATA3__FLEXIO1_FLEXIO_BIT25                     0x016C 0x0370 0x04CC 0x04 0x01
+#define IMX95_PAD_SD3_DATA3__GPIO3_IO_BIT25                           0x016C 0x0370 0x0000 0x05 0x00
+#define IMX95_PAD_SD3_DATA3__XSPI_DATA_BIT3                           0x016C 0x0370 0x05F8 0x06 0x00
+
+#define IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0                   0x0170 0x0374 0x04D4 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA0__NETCMIX_TOP_SAI2_TX_DATA_BIT4          0x0170 0x0374 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_DATA0__SAI4_TX_BCLK                           0x0170 0x0374 0x05A0 0x02 0x01
+#define IMX95_PAD_XSPI1_DATA0__SAI4_RX_DATA_BIT1                      0x0170 0x0374 0x0000 0x03 0x00
+#define IMX95_PAD_XSPI1_DATA0__XSPI_DATA_BIT0                         0x0170 0x0374 0x05EC 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA0__GPIO5_IO_BIT0                          0x0170 0x0374 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1                   0x0174 0x0378 0x04D8 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA1__NETCMIX_TOP_SAI2_TX_DATA_BIT5          0x0174 0x0378 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_DATA1__SAI4_TX_SYNC                           0x0174 0x0378 0x05A4 0x02 0x01
+#define IMX95_PAD_XSPI1_DATA1__SAI4_TX_DATA_BIT1                      0x0174 0x0378 0x0000 0x03 0x00
+#define IMX95_PAD_XSPI1_DATA1__XSPI_DATA_BIT1                         0x0174 0x0378 0x05F0 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA1__GPIO5_IO_BIT1                          0x0174 0x0378 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2                   0x0178 0x037C 0x04DC 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA2__NETCMIX_TOP_SAI2_TX_DATA_BIT6          0x0178 0x037C 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_DATA2__SAI4_TX_DATA_BIT0                      0x0178 0x037C 0x0000 0x02 0x00
+#define IMX95_PAD_XSPI1_DATA2__XSPI_DATA_BIT2                         0x0178 0x037C 0x05F4 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA2__GPIO5_IO_BIT2                          0x0178 0x037C 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3                   0x017C 0x0380 0x04E0 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA3__NETCMIX_TOP_SAI2_TX_DATA_BIT7          0x017C 0x0380 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_DATA3__SAI4_RX_DATA_BIT0                      0x017C 0x0380 0x0598 0x02 0x01
+#define IMX95_PAD_XSPI1_DATA3__XSPI_DATA_BIT3                         0x017C 0x0380 0x05F8 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA3__GPIO5_IO_BIT3                          0x017C 0x0380 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA4__FLEXSPI1_A_DATA_BIT4                   0x0180 0x0384 0x04E4 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0                      0x0180 0x0384 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_DATA4__SAI5_RX_DATA_BIT1                      0x0180 0x0384 0x05B0 0x02 0x01
+#define IMX95_PAD_XSPI1_DATA4__XSPI_DATA_BIT4                         0x0180 0x0384 0x05FC 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA4__GPIO5_IO_BIT4                          0x0180 0x0384 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA5__FLEXSPI1_A_DATA_BIT5                   0x0184 0x0388 0x04E8 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC                           0x0184 0x0388 0x05C4 0x01 0x01
+#define IMX95_PAD_XSPI1_DATA5__SAI5_RX_DATA_BIT2                      0x0184 0x0388 0x05B4 0x02 0x01
+#define IMX95_PAD_XSPI1_DATA5__NETCMIX_TOP_SAI2_RX_DATA_BIT6          0x0184 0x0388 0x043C 0x03 0x00
+#define IMX95_PAD_XSPI1_DATA5__XSPI_DATA_BIT5                         0x0184 0x0388 0x0600 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA5__GPIO5_IO_BIT5                          0x0184 0x0388 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA6__FLEXSPI1_A_DATA_BIT6                   0x0188 0x038C 0x04EC 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK                           0x0188 0x038C 0x05C0 0x01 0x01
+#define IMX95_PAD_XSPI1_DATA6__SAI5_RX_DATA_BIT3                      0x0188 0x038C 0x05B8 0x02 0x01
+#define IMX95_PAD_XSPI1_DATA6__NETCMIX_TOP_SAI2_RX_DATA_BIT7          0x0188 0x038C 0x0440 0x03 0x00
+#define IMX95_PAD_XSPI1_DATA6__XSPI_DATA_BIT6                         0x0188 0x038C 0x0604 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA6__GPIO5_IO_BIT6                          0x0188 0x038C 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA7__FLEXSPI1_A_DATA_BIT7                   0x018C 0x0390 0x04F0 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0                      0x018C 0x0390 0x05AC 0x01 0x01
+#define IMX95_PAD_XSPI1_DATA7__SAI5_TX_DATA_BIT1                      0x018C 0x0390 0x0000 0x02 0x00
+#define IMX95_PAD_XSPI1_DATA7__XSPI_DATA_BIT7                         0x018C 0x0390 0x0608 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA7__GPIO5_IO_BIT7                          0x018C 0x0390 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS                           0x0190 0x0394 0x04D0 0x00 0x01
+#define IMX95_PAD_XSPI1_DQS__SAI5_RX_SYNC                             0x0190 0x0394 0x05BC 0x01 0x01
+#define IMX95_PAD_XSPI1_DQS__SAI5_TX_DATA_BIT2                        0x0190 0x0394 0x0000 0x02 0x00
+#define IMX95_PAD_XSPI1_DQS__NETCMIX_TOP_SAI2_RX_DATA_BIT6            0x0190 0x0394 0x043C 0x03 0x01
+#define IMX95_PAD_XSPI1_DQS__XSPI_DQS                                 0x0190 0x0394 0x05E4 0x04 0x01
+#define IMX95_PAD_XSPI1_DQS__GPIO5_IO_BIT8                            0x0190 0x0394 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK                         0x0194 0x0398 0x04F4 0x00 0x01
+#define IMX95_PAD_XSPI1_SCLK__NETCMIX_TOP_SAI2_RX_DATA_BIT4           0x0194 0x0398 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_SCLK__SAI4_RX_SYNC                            0x0194 0x0398 0x059C 0x02 0x01
+#define IMX95_PAD_XSPI1_SCLK__EARC_DC_HPD_IN                          0x0194 0x0398 0x0000 0x03 0x00
+#define IMX95_PAD_XSPI1_SCLK__XSPI_CLK                                0x0194 0x0398 0x05E8 0x04 0x01
+#define IMX95_PAD_XSPI1_SCLK__GPIO5_IO_BIT9                           0x0194 0x0398 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B                       0x0198 0x039C 0x0000 0x00 0x00
+#define IMX95_PAD_XSPI1_SS0_B__NETCMIX_TOP_SAI2_RX_DATA_BIT5          0x0198 0x039C 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_SS0_B__SAI4_RX_BCLK                           0x0198 0x039C 0x0594 0x02 0x01
+#define IMX95_PAD_XSPI1_SS0_B__EARC_CEC_OUT                           0x0198 0x039C 0x0000 0x03 0x00
+#define IMX95_PAD_XSPI1_SS0_B__XSPI_CS                                0x0198 0x039C 0x05E0 0x04 0x01
+#define IMX95_PAD_XSPI1_SS0_B__GPIO5_IO_BIT10                         0x0198 0x039C 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_SS1_B__FLEXSPI1_A_SS1_B                       0x019C 0x03A0 0x0000 0x00 0x00
+#define IMX95_PAD_XSPI1_SS1_B__SAI5_RX_BCLK                           0x019C 0x03A0 0x05A8 0x01 0x01
+#define IMX95_PAD_XSPI1_SS1_B__SAI5_TX_DATA_BIT3                      0x019C 0x03A0 0x0000 0x02 0x00
+#define IMX95_PAD_XSPI1_SS1_B__NETCMIX_TOP_SAI2_RX_DATA_BIT7          0x019C 0x03A0 0x0440 0x03 0x01
+#define IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11                         0x019C 0x03A0 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD2_CD_B__USDHC2_CD_B                               0x01A0 0x03A4 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_CD_B__NETCMIX_TOP_NETC_TMR_1588_TRIG1           0x01A0 0x03A4 0x0434 0x01 0x01
+#define IMX95_PAD_SD2_CD_B__I3C2_SCL                                  0x01A0 0x03A4 0x04F8 0x02 0x01
+#define IMX95_PAD_SD2_CD_B__FLEXIO1_FLEXIO_BIT0                       0x01A0 0x03A4 0x0468 0x04 0x01
+#define IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0                             0x01A0 0x03A4 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD2_CLK__USDHC2_CLK                                 0x01A4 0x03A8 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_CLK__NETCMIX_TOP_NETC_TMR_1588_PP1              0x01A4 0x03A8 0x0000 0x01 0x00
+#define IMX95_PAD_SD2_CLK__I3C2_SDA                                   0x01A4 0x03A8 0x04FC 0x02 0x01
+#define IMX95_PAD_SD2_CLK__FLEXIO1_FLEXIO_BIT1                        0x01A4 0x03A8 0x046C 0x04 0x01
+#define IMX95_PAD_SD2_CLK__GPIO3_IO_BIT1                              0x01A4 0x03A8 0x0000 0x05 0x00
+#define IMX95_PAD_SD2_CLK__CCMSRCGPCMIX_TOP_OBSERVE_0                 0x01A4 0x03A8 0x0000 0x06 0x00
+
+#define IMX95_PAD_SD2_CMD__USDHC2_CMD                                 0x01A8 0x03AC 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_CMD__NETCMIX_TOP_NETC_TMR_1588_TRIG2            0x01A8 0x03AC 0x0438 0x01 0x01
+#define IMX95_PAD_SD2_CMD__I3C2_PUR                                   0x01A8 0x03AC 0x0000 0x02 0x00
+#define IMX95_PAD_SD2_CMD__I3C2_PUR_B                                 0x01A8 0x03AC 0x0000 0x03 0x00
+#define IMX95_PAD_SD2_CMD__FLEXIO1_FLEXIO_BIT2                        0x01A8 0x03AC 0x0470 0x04 0x01
+#define IMX95_PAD_SD2_CMD__GPIO3_IO_BIT2                              0x01A8 0x03AC 0x0000 0x05 0x00
+#define IMX95_PAD_SD2_CMD__CCMSRCGPCMIX_TOP_OBSERVE_1                 0x01A8 0x03AC 0x0000 0x06 0x00
+
+#define IMX95_PAD_SD2_DATA0__USDHC2_DATA0                             0x01AC 0x03B0 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_DATA0__NETCMIX_TOP_NETC_TMR_1588_PP2            0x01AC 0x03B0 0x0000 0x01 0x00
+#define IMX95_PAD_SD2_DATA0__CAN2_TX                                  0x01AC 0x03B0 0x0000 0x02 0x00
+#define IMX95_PAD_SD2_DATA0__FLEXIO1_FLEXIO_BIT3                      0x01AC 0x03B0 0x0474 0x04 0x01
+#define IMX95_PAD_SD2_DATA0__GPIO3_IO_BIT3                            0x01AC 0x03B0 0x0000 0x05 0x00
+#define IMX95_PAD_SD2_DATA0__CCMSRCGPCMIX_TOP_OBSERVE_2               0x01AC 0x03B0 0x0000 0x06 0x00
+
+#define IMX95_PAD_SD2_DATA1__USDHC2_DATA1                             0x01B0 0x03B4 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_DATA1__NETCMIX_TOP_NETC_TMR_1588_CLK            0x01B0 0x03B4 0x0000 0x01 0x00
+#define IMX95_PAD_SD2_DATA1__CAN2_RX                                  0x01B0 0x03B4 0x0444 0x02 0x03
+#define IMX95_PAD_SD2_DATA1__FLEXIO1_FLEXIO_BIT4                      0x01B0 0x03B4 0x0478 0x04 0x01
+#define IMX95_PAD_SD2_DATA1__GPIO3_IO_BIT4                            0x01B0 0x03B4 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD2_DATA2__USDHC2_DATA2                             0x01B4 0x03B8 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_DATA2__NETCMIX_TOP_NETC_TMR_1588_PP3            0x01B4 0x03B8 0x0000 0x01 0x00
+#define IMX95_PAD_SD2_DATA2__NETCMIX_TOP_MQS2_RIGHT                   0x01B4 0x03B8 0x0000 0x02 0x00
+#define IMX95_PAD_SD2_DATA2__FLEXIO1_FLEXIO_BIT5                      0x01B4 0x03B8 0x047C 0x04 0x01
+#define IMX95_PAD_SD2_DATA2__GPIO3_IO_BIT5                            0x01B4 0x03B8 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD2_DATA3__USDHC2_DATA3                             0x01B8 0x03BC 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_DATA3__LPTMR2_ALT1                              0x01B8 0x03BC 0x0548 0x01 0x01
+#define IMX95_PAD_SD2_DATA3__NETCMIX_TOP_MQS2_LEFT                    0x01B8 0x03BC 0x0000 0x02 0x00
+#define IMX95_PAD_SD2_DATA3__NETCMIX_TOP_NETC_TMR_1588_ALARM1         0x01B8 0x03BC 0x0000 0x03 0x00
+#define IMX95_PAD_SD2_DATA3__FLEXIO1_FLEXIO_BIT6                      0x01B8 0x03BC 0x0480 0x04 0x01
+#define IMX95_PAD_SD2_DATA3__GPIO3_IO_BIT6                            0x01B8 0x03BC 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD2_RESET_B__USDHC2_RESET_B                         0x01BC 0x03C0 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_RESET_B__LPTMR2_ALT2                            0x01BC 0x03C0 0x054C 0x01 0x01
+#define IMX95_PAD_SD2_RESET_B__NETCMIX_TOP_NETC_TMR_1588_GCLK         0x01BC 0x03C0 0x0000 0x03 0x00
+#define IMX95_PAD_SD2_RESET_B__FLEXIO1_FLEXIO_BIT7                    0x01BC 0x03C0 0x0484 0x04 0x01
+#define IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7                          0x01BC 0x03C0 0x0000 0x05 0x00
+
+#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL                     0x01C0 0x03C4 0x0000 0x00 0x00
+#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_I3C1_SCL                       0x01C0 0x03C4 0x0000 0x01 0x00
+#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPUART1_DCD_B                  0x01C0 0x03C4 0x0000 0x02 0x00
+#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_TPM2_CH0                       0x01C0 0x03C4 0x0000 0x03 0x00
+#define IMX95_PAD_I2C1_SCL__VPUMIX_TOP_UART_RX                        0x01C0 0x03C4 0x0000 0x04 0x00
+#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_GPIO1_IO_BIT0                  0x01C0 0x03C4 0x0000 0x05 0x00
+
+#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA                     0x01C4 0x03C8 0x0000 0x00 0x00
+#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_I3C1_SDA                       0x01C4 0x03C8 0x0000 0x01 0x00
+#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPUART1_RIN_B                  0x01C4 0x03C8 0x0000 0x02 0x00
+#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_TPM2_CH1                       0x01C4 0x03C8 0x0000 0x03 0x00
+#define IMX95_PAD_I2C1_SDA__VPUMIX_TOP_UART_TX                        0x01C4 0x03C8 0x0000 0x04 0x00
+#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_GPIO1_IO_BIT1                  0x01C4 0x03C8 0x0000 0x05 0x00
+
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL                     0x01C8 0x03CC 0x0000 0x00 0x00
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_I3C1_PUR                       0x01C8 0x03CC 0x0000 0x01 0x00
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPUART2_DCD_B                  0x01C8 0x03CC 0x0000 0x02 0x00
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_TPM2_CH2                       0x01C8 0x03CC 0x0000 0x03 0x00
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_SAI1_RX_SYNC                   0x01C8 0x03CC 0x0000 0x04 0x00
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_GPIO1_IO_BIT2                  0x01C8 0x03CC 0x0000 0x05 0x00
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_I3C1_PUR_B                     0x01C8 0x03CC 0x0000 0x06 0x00
+
+#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA                     0x01CC 0x03D0 0x0000 0x00 0x00
+#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPUART2_RIN_B                  0x01CC 0x03D0 0x0000 0x02 0x00
+#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_TPM2_CH3                       0x01CC 0x03D0 0x0000 0x03 0x00
+#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_SAI1_RX_BCLK                   0x01CC 0x03D0 0x0000 0x04 0x00
+#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_GPIO1_IO_BIT3                  0x01CC 0x03D0 0x0000 0x05 0x00
+
+#define IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX                    0x01D0 0x03D4 0x0000 0x00 0x00
+#define IMX95_PAD_UART1_RXD__S400_UART_RX                             0x01D0 0x03D4 0x0000 0x01 0x00
+#define IMX95_PAD_UART1_RXD__AONMIX_TOP_LPSPI2_SIN                    0x01D0 0x03D4 0x0000 0x02 0x00
+#define IMX95_PAD_UART1_RXD__AONMIX_TOP_TPM1_CH0                      0x01D0 0x03D4 0x0000 0x03 0x00
+#define IMX95_PAD_UART1_RXD__AONMIX_TOP_GPIO1_IO_BIT4                 0x01D0 0x03D4 0x0000 0x05 0x00
+
+#define IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX                    0x01D4 0x03D8 0x0000 0x00 0x00
+#define IMX95_PAD_UART1_TXD__S400_UART_TX                             0x01D4 0x03D8 0x0000 0x01 0x00
+#define IMX95_PAD_UART1_TXD__AONMIX_TOP_LPSPI2_PCS0                   0x01D4 0x03D8 0x0000 0x02 0x00
+#define IMX95_PAD_UART1_TXD__AONMIX_TOP_TPM1_CH1                      0x01D4 0x03D8 0x0000 0x03 0x00
+#define IMX95_PAD_UART1_TXD__AONMIX_TOP_GPIO1_IO_BIT5                 0x01D4 0x03D8 0x0000 0x05 0x00
+
+#define IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART2_RX                    0x01D8 0x03DC 0x0000 0x00 0x00
+#define IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART1_CTS_B                 0x01D8 0x03DC 0x0000 0x01 0x00
+#define IMX95_PAD_UART2_RXD__AONMIX_TOP_LPSPI2_SOUT                   0x01D8 0x03DC 0x0000 0x02 0x00
+#define IMX95_PAD_UART2_RXD__AONMIX_TOP_TPM1_CH2                      0x01D8 0x03DC 0x0000 0x03 0x00
+#define IMX95_PAD_UART2_RXD__AONMIX_TOP_SAI1_MCLK                     0x01D8 0x03DC 0x041C 0x04 0x00
+#define IMX95_PAD_UART2_RXD__AONMIX_TOP_GPIO1_IO_BIT6                 0x01D8 0x03DC 0x0000 0x05 0x00
+
+#define IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART2_TX                    0x01DC 0x03E0 0x0000 0x00 0x00
+#define IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART1_RTS_B                 0x01DC 0x03E0 0x0000 0x01 0x00
+#define IMX95_PAD_UART2_TXD__AONMIX_TOP_LPSPI2_SCK                    0x01DC 0x03E0 0x0000 0x02 0x00
+#define IMX95_PAD_UART2_TXD__AONMIX_TOP_TPM1_CH3                      0x01DC 0x03E0 0x0000 0x03 0x00
+#define IMX95_PAD_UART2_TXD__AONMIX_TOP_GPIO1_IO_BIT7                 0x01DC 0x03E0 0x0000 0x05 0x00
+
+#define IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK                         0x01E0 0x03E4 0x0000 0x00 0x00
+#define IMX95_PAD_PDM_CLK__AONMIX_TOP_MQS1_LEFT                       0x01E0 0x03E4 0x0000 0x01 0x00
+#define IMX95_PAD_PDM_CLK__AONMIX_TOP_LPTMR1_ALT1                     0x01E0 0x03E4 0x0000 0x04 0x00
+#define IMX95_PAD_PDM_CLK__AONMIX_TOP_GPIO1_IO_BIT8                   0x01E0 0x03E4 0x0000 0x05 0x00
+#define IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX                         0x01E0 0x03E4 0x0000 0x06 0x00
+
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0     0x01E4 0x03E8 0x040C 0x00 0x00
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_MQS1_RIGHT              0x01E4 0x03E8 0x0000 0x01 0x00
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_LPSPI1_PCS1             0x01E4 0x03E8 0x0000 0x02 0x00
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_TPM1_EXTCLK             0x01E4 0x03E8 0x0000 0x03 0x00
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_LPTMR1_ALT2             0x01E4 0x03E8 0x0000 0x04 0x00
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_GPIO1_IO_BIT9           0x01E4 0x03E8 0x0000 0x05 0x00
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX                 0x01E4 0x03E8 0x0408 0x06 0x00
+
+#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_PDM_BIT_STREAM_BIT1     0x01E8 0x03EC 0x0410 0x00 0x00
+#define IMX95_PAD_PDM_BIT_STREAM1__NMI_GLUE_NMI                       0x01E8 0x03EC 0x0000 0x01 0x00
+#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_LPSPI2_PCS1             0x01E8 0x03EC 0x0000 0x02 0x00
+#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_TPM2_EXTCLK             0x01E8 0x03EC 0x0000 0x03 0x00
+#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_LPTMR1_ALT3             0x01E8 0x03EC 0x0000 0x04 0x00
+#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_GPIO1_IO_BIT10          0x01E8 0x03EC 0x0000 0x05 0x00
+#define IMX95_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_TOP_EXT_CLK1          0x01E8 0x03EC 0x0420 0x06 0x00
+
+#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_SYNC                  0x01EC 0x03F0 0x0000 0x00 0x00
+#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_DATA_BIT1             0x01EC 0x03F0 0x0000 0x01 0x00
+#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_LPSPI1_PCS0                   0x01EC 0x03F0 0x0000 0x02 0x00
+#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_LPUART2_DTR_B                 0x01EC 0x03F0 0x0000 0x03 0x00
+#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_MQS1_LEFT                     0x01EC 0x03F0 0x0000 0x04 0x00
+#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11                0x01EC 0x03F0 0x0000 0x05 0x00
+
+#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_SAI1_TX_BCLK                   0x01F0 0x03F4 0x0000 0x00 0x00
+#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_LPUART2_CTS_B                  0x01F0 0x03F4 0x0000 0x01 0x00
+#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_LPSPI1_SIN                     0x01F0 0x03F4 0x0000 0x02 0x00
+#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_LPUART1_DSR_B                  0x01F0 0x03F4 0x0000 0x03 0x00
+#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_CAN1_RX                        0x01F0 0x03F4 0x0408 0x04 0x01
+#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_GPIO1_IO_BIT12                 0x01F0 0x03F4 0x0000 0x05 0x00
+
+#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_SAI1_TX_DATA_BIT0             0x01F4 0x03F8 0x0000 0x00 0x00
+#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_LPUART2_RTS_B                 0x01F4 0x03F8 0x0000 0x01 0x00
+#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_LPSPI1_SCK                    0x01F4 0x03F8 0x0000 0x02 0x00
+#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_LPUART1_DTR_B                 0x01F4 0x03F8 0x0000 0x03 0x00
+#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_CAN1_TX                       0x01F4 0x03F8 0x0000 0x04 0x00
+#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_GPIO1_IO_BIT13                0x01F4 0x03F8 0x0000 0x05 0x00
+
+#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_RX_DATA_BIT0             0x01F8 0x03FC 0x0000 0x00 0x00
+#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_MCLK                     0x01F8 0x03FC 0x041C 0x01 0x01
+#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_LPSPI1_SOUT                   0x01F8 0x03FC 0x0000 0x02 0x00
+#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_LPUART2_DSR_B                 0x01F8 0x03FC 0x0000 0x03 0x00
+#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_MQS1_RIGHT                    0x01F8 0x03FC 0x0000 0x04 0x00
+#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_GPIO1_IO_BIT14                0x01F8 0x03FC 0x0000 0x05 0x00
+
+#define IMX95_PAD_WDOG_ANY__AONMIX_TOP_WDOG_ANY                       0x01FC 0x0400 0x0000 0x00 0x00
+#define IMX95_PAD_WDOG_ANY__AONMIX_TOP_FCCU_EOUT1                     0x01FC 0x0400 0x0000 0x01 0x00
+#define IMX95_PAD_WDOG_ANY__AONMIX_TOP_GPIO1_IO_BIT15                 0x01FC 0x0400 0x0000 0x05 0x00
+#endif /* __DTS_IMX95_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx95-power.h b/arch/arm64/boot/dts/freescale/imx95-power.h
new file mode 100644
index 000000000000..0b7f0bc30e19
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-power.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ *  Copyright 2024 NXP
+ */
+
+#ifndef __IMX95_POWER_H__
+#define __IMX95_POWER_H__
+
+#define IMX95_PD_ANA		0
+#define IMX95_PD_AON		1
+#define IMX95_PD_BBSM		2
+#define IMX95_PD_CAMERA		3
+#define IMX95_PD_CCMSRCGPC	4
+#define IMX95_PD_A55C0		5
+#define IMX95_PD_A55C1		6
+#define IMX95_PD_A55C2		7
+#define IMX95_PD_A55C3		8
+#define IMX95_PD_A55C4		9
+#define IMX95_PD_A55C5		10
+#define IMX95_PD_A55P		11
+#define IMX95_PD_DDR		12
+#define IMX95_PD_DISPLAY	13
+#define IMX95_PD_GPU		14
+#define IMX95_PD_HSIO_TOP	15
+#define IMX95_PD_HSIO_WAON	16
+#define IMX95_PD_M7		17
+#define IMX95_PD_NETC		18
+#define IMX95_PD_NOC		19
+#define IMX95_PD_NPU		20
+#define IMX95_PD_VPU		21
+#define IMX95_PD_WAKEUP		22
+
+#define IMX95_PERF_ELE		0
+#define IMX95_PERF_M33		1
+#define IMX95_PERF_WAKEUP	2
+#define IMX95_PERF_M7		3
+#define IMX95_PERF_DRAM		4
+#define IMX95_PERF_HSIO		5
+#define IMX95_PERF_NPU		6
+#define IMX95_PERF_NOC		7
+#define IMX95_PERF_A55		8
+#define IMX95_PERF_GPU		9
+#define IMX95_PERF_VPU		10
+#define IMX95_PERF_CAM		11
+#define IMX95_PERF_DISP		12
+
+#endif
diff --git a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts
new file mode 100644
index 000000000000..5b6b2bb80b28
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx95-tqma9596sa.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX95 TQMa95xxSA on MB-SMARC-2";
+	compatible = "tq,imx95-tqma9596sa-mb-smarc-2", "tq,imx95-tqma9596sa", "fsl,imx95";
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		i2c5 = &lpi2c6;
+		i2c6 = &lpi2c7;
+		i2c7 = &lpi2c8;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &pcf85063;
+		rtc1 = &scmi_bbm;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		serial7 = &lpuart8;
+	};
+
+	chosen {
+		stdout-path = &lpuart7;
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&tpm3 0 100000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_12v0>;
+		status = "disabled";
+	};
+
+	backlight_lvds1: backlight-lvds1 {
+		compatible = "pwm-backlight";
+		pwms = <&tpm4 0 100000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&expander2 3 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_12v0>;
+		status = "disabled";
+	};
+
+	panel_lvds0: panel-lvds0 {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_lvds0>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds0: endpoint {
+				/* TODO: LVDS0 out */
+			};
+		};
+	};
+
+	panel_lvds1: panel-lvds1 {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		backlight = <&backlight_lvds1>;
+		power-supply = <&reg_lvds1>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds1: endpoint {
+				/* TODO: LVDS1 out */
+			};
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "12V0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_lvds0: regulator-lvds0 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD0_VDD_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds1: regulator-lvds1 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD1_VDD_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander2 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		audio-codec = <&tlv320aic3x04>;
+		audio-cpu = <&sai3>;
+	};
+};
+
+&enetc_port0 {
+	status = "okay";
+};
+
+&enetc_port1 {
+	status = "okay";
+};
+
+&expander2 {
+	pcie1-clk-en-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PCIE1_CLK_EN";
+	};
+
+	pcie2-clk-en-hog {
+		gpio-hog;
+		gpios = <15 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PCIE2_CLK_EN";
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan3>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&lpi2c1 {
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&scmi_clk IMX95_CLK_SAI3>;
+		clock-names = "mclk";
+		iov-supply = <&reg_1v8>;
+		ldoin-supply = <&reg_3v3>;
+	};
+
+	eeprom2: eeprom@57 {
+		compatible = "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_3v3>;
+	};
+};
+
+&lpspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi3>;
+	cs-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>, <&gpio2 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* SER0 */
+&lpuart1 {
+	status = "disabled";
+};
+
+/* SER3 */
+&lpuart5 {
+	status = "okay";
+};
+
+/* SER1 */
+&lpuart7 {
+	status = "okay";
+};
+
+/* SER2 */
+&lpuart8 {
+	status = "okay";
+};
+
+/* X44 mPCIe */
+&pcie0 {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	clocks = <&scmi_clk IMX95_CLK_HSIO>,
+		 <&pcieclk 1>,
+		 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+		 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+	reset-gpio = <&expander2 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* X22 PCIe x1 socket */
+&pcie1 {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	clocks = <&scmi_clk IMX95_CLK_HSIO>,
+		 <&pcieclk 0>,
+		 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+		 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+	reset-gpio = <&expander2 10 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&reg_sdvmmc {
+	status = "okay";
+};
+
+&sai3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai5 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI5>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+};
+
+/* X4 */
+&usb2 {
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	/* DR not yet supported */
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+
+/* X16 */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_sdvmmc>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi
new file mode 100644
index 000000000000..180124cc5bce
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi
@@ -0,0 +1,698 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx95.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &enetc_port0;
+		ethernet1 = &enetc_port1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/*
+		 * DRAM base addr, size : 2048 MiB DRAM
+		 * should be corrected by bootloader
+		 */
+		reg = <0 0x80000000 0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux_cma: linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x28000000>;
+			alloc-ranges = <0 0x80000000 0 0x80000000>;
+			linux,cma-default;
+		};
+
+		vpu_boot: vpu_boot@a0000000 {
+			reg = <0 0xa0000000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	clk_dp: clk-dp {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* Controlled by system manager */
+	reg_sdvmmc: regulator-sdvmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sdvmmc>;
+		regulator-name = "SDIO_PWR_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+};
+
+&enetc_port0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enetc0>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+};
+
+&enetc_port1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enetc1>;
+	phy-handle = <&ethphy3>;
+	phy-mode = "rgmii-id";
+};
+
+&netc_timer {
+	status = "okay";
+};
+
+&flexspi1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_flexspi1>;
+	pinctrl-1 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		vcc-supply = <&reg_1v8>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "GPIO7", "GPIO8",
+			  "", "GPIO9", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>;
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "SLEEP", "GPIO5",
+			  "", "", "GPIO6", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	tmp1075: temperature-sensor@4a {
+		compatible = "ti,tmp1075";
+		reg = <0x4a>;
+		vs-supply = <&reg_1v8>;
+	};
+
+	eeprom_smarc: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_1v8>;
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcf85063>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	m24c64: eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+		vcc-supply = <&reg_1v8>;
+	};
+
+	/* protectable identification memory (part of M24C64-D @50) */
+	eeprom@58 {
+		compatible = "atmel,24c64d-wl";
+		reg = <0x58>;
+		vcc-supply = <&reg_1v8>;
+	};
+
+	/* protectable identification memory (part of M24C64-D @54) */
+	eeprom@5c {
+		compatible = "atmel,24c64d-wl";
+		reg = <0x5c>;
+		vcc-supply = <&reg_1v8>;
+	};
+
+	pcieclk: clock-generator@6a {
+		compatible = "renesas,9fgv0441";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
+
+	imu@6b {
+		compatible = "st,ism330dhcx";
+		reg = <0x6b>;
+		vdd-supply = <&reg_3v3>;
+		vddio-supply = <&reg_3v3>;
+	};
+
+	/* D23 */
+	expander2: gpio@74 {
+		compatible = "ti,tca9539";
+		reg = <0x74>;
+		vcc-supply = <&reg_1v8>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "GPIO4", "LCD0_BLKT_EN", "LCD0_VDD_EN", "LCD1_BLKT_EN",
+				  "LCD1_VDD_EN", "ENET1_RESET#", "ENET2_RESET#", "GBE0_SDP_DIR",
+				  "GBE1_SDP_DIR", "PCIE1_RST#", "PCIE2_RST#", "DP_BRIDGE_EN",
+				  "HUB_RST#", "QSPI_RESET#", "PCIE1_CLK_EN", "PCIE2_CLK_EN";
+	};
+
+	/* D21 */
+	expander1: gpio@75 {
+		compatible = "ti,tca9539";
+		reg = <0x75>;
+		vcc-supply = <&reg_1v8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_expander1>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		gpio-line-names = "GPIO10", "GPIO11", "GPIO12", "GPIO13",
+				  "CHG_PRSNT#", "CHARGING", "LID", "BATLOW#",
+				  "TEMP_EVENT#", "PGOOD_ARM", "PGOOD_SOC", "PCIE_WAKE#_1V8",
+				  "GPIO0", "GPIO1", "GPIO2", "GPIO3";
+	};
+};
+
+/* I2C_CAM0 */
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	dp_bridge: dp-bridge@f {
+		compatible = "toshiba,tc9595", "toshiba,tc358767";
+		reg = <0x0f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tc9595>;
+		clock-names = "ref";
+		clocks = <&clk_dp>;
+		reset-gpios = <&expander2 11 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+		toshiba,hpd-pin = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				dp_dsi_in: endpoint {
+					/* TODO: DSI out */
+					data-lanes = <1 2 3 4>;
+				};
+			};
+		};
+	};
+};
+
+/* I2C_CAM1 */
+&lpi2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c4>;
+	pinctrl-1 = <&pinctrl_lpi2c4>;
+	status = "okay";
+};
+
+/* I2C_LCD */
+&lpi2c6 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c6>;
+	pinctrl-1 = <&pinctrl_lpi2c6>;
+	status = "okay";
+};
+
+/* SER0 */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+};
+
+/* SER3 */
+&lpuart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart5>;
+};
+
+/* SER1 */
+&lpuart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart7>;
+};
+
+/* SER2 */
+&lpuart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart8>;
+};
+
+&netc_blk_ctrl {
+	status = "okay";
+};
+
+&netc_emdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mdio>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ethphy0>;
+		reset-gpios = <&expander2 5 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <500000>;
+		reset-deassert-us = <50000>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,dp83867-rxctrl-strap-quirk;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	ethphy3: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ethphy3>;
+		reset-gpios = <&expander2 6 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <500000>;
+		reset-deassert-us = <50000>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,dp83867-rxctrl-strap-quirk;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&scmi_bbm {
+	linux,code = <KEY_POWER>;
+};
+
+&tpm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm3>;
+};
+
+&tpm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm4>;
+};
+
+&tpm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm5>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&expander2 12 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&expander2 12 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&wdog3 {
+	status = "okay";
+};
+
+&scmi_iomuxc {
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13				0x1100>;
+	};
+
+	pinctrl_ethphy3: ethphy3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14				0x1100>;
+	};
+
+	pinctrl_enetc0: enetc0grp {
+		fsl,pins = <IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0		0x1100>,
+			   <IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1		0x1100>,
+			   <IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2		0x1100>,
+			   <IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3		0x1100>,
+			   <IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK		0x1100>,
+			   <IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x1100>,
+			   <IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x11e>,
+			   <IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x11e>,
+			   <IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x11e>,
+			   <IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x11e>,
+			   <IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK		0x11e>,
+			   <IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x11e>,
+			   <IMX95_PAD_GPIO_IO23__GPIO2_IO_BIT23				0x51e>;
+	};
+
+	pinctrl_enetc1: enetc1grp {
+		fsl,pins = <IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0		0x1100>,
+			   <IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1		0x1100>,
+			   <IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2		0x1100>,
+			   <IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3		0x1100>,
+			   <IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK		0x1100>,
+			   <IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL	0x1100>,
+			   <IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0		0x11e>,
+			   <IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1		0x11e>,
+			   <IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2		0x11e>,
+			   <IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3		0x11e>,
+			   <IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK		0x11e>,
+			   <IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL	0x11e>,
+			   <IMX95_PAD_GPIO_IO24__GPIO2_IO_BIT24				0x51e>;
+	};
+
+	pinctrl_expander1: expander1grp {
+		fsl,pins = <IMX95_PAD_CCM_CLKO2__GPIO3_IO_BIT27				0x1100>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX	0x1300>,
+			   <IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX		0x31e>;
+	};
+
+	pinctrl_flexcan3: flexcan3grp {
+		fsl,pins = <IMX95_PAD_CCM_CLKO3__CAN3_TX		0x31e>,
+			   <IMX95_PAD_CCM_CLKO4__CAN3_RX		0x1300>;
+	};
+
+	pinctrl_flexspi1: flexspi1grp {
+		fsl,pins = <IMX95_PAD_SD3_CLK__FLEXSPI1_A_SCLK		0x11e>,
+			   <IMX95_PAD_SD3_CMD__FLEXSPI1_A_SS0_B		0x11e>,
+			   <IMX95_PAD_SD3_DATA0__FLEXSPI1_A_DATA_BIT0	0x11e>,
+			   <IMX95_PAD_SD3_DATA1__FLEXSPI1_A_DATA_BIT1	0x11e>,
+			   <IMX95_PAD_SD3_DATA2__FLEXSPI1_A_DATA_BIT2	0x11e>,
+			   <IMX95_PAD_SD3_DATA3__FLEXSPI1_A_DATA_BIT3	0x11e>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_GPIO1_IO_BIT10	0x111e>,
+			   <IMX95_PAD_SAI1_TXD0__AONMIX_TOP_GPIO1_IO_BIT13		0x111e>,
+			   <IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11		0x111e>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18		0x1100>,
+			   <IMX95_PAD_GPIO_IO19__GPIO2_IO_BIT19		0x111e>,
+			   <IMX95_PAD_GPIO_IO22__GPIO2_IO_BIT22		0x111e>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL		0x4000191e>,
+			   <IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA		0x4000191e>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO28__LPI2C3_SDA			0x4000191e>,
+			   <IMX95_PAD_GPIO_IO29__LPI2C3_SCL			0x4000191e>;
+	};
+
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO30__LPI2C4_SDA             0x4000191e>,
+			   <IMX95_PAD_GPIO_IO31__LPI2C4_SCL             0x4000191e>;
+	};
+
+	pinctrl_lpi2c6: lpi2c6grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO02__LPI2C6_SDA             0x4000191e>,
+			   <IMX95_PAD_GPIO_IO03__LPI2C6_SCL             0x4000191e>;
+	};
+
+	pinctrl_lpspi3: lpspi3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO07__GPIO2_IO_BIT7		0x51e>,
+			   <IMX95_PAD_GPIO_IO08__GPIO2_IO_BIT8		0x51e>,
+			   <IMX95_PAD_GPIO_IO09__LPSPI3_SIN		0x51e>,
+			   <IMX95_PAD_GPIO_IO10__LPSPI3_SOUT		0x51e>,
+			   <IMX95_PAD_GPIO_IO11__LPSPI3_SCK		0x51e>;
+	};
+
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX		0x1300>,
+			   <IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX		0x31e>,
+			   <IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART1_RTS_B	0x1300>,
+			   <IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART1_CTS_B	0x31e>;
+	};
+
+	pinctrl_lpuart5: lpuart5grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO00__LPUART5_TX			0x31e>,
+			   <IMX95_PAD_GPIO_IO01__LPUART5_RX			0x1300>;
+	};
+
+	pinctrl_lpuart7: lpuart7grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO36__LPUART7_TX			0x31e>,
+			   <IMX95_PAD_GPIO_IO37__LPUART7_RX			0x1300>;
+	};
+
+	pinctrl_lpuart8: lpuart8grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO12__LPUART8_TX			0x31e>,
+			   <IMX95_PAD_GPIO_IO13__LPUART8_RX			0x1300>,
+			   <IMX95_PAD_GPIO_IO14__LPUART8_CTS_B			0x31e>,
+			   <IMX95_PAD_GPIO_IO15__LPUART8_RTS_B			0x1300>;
+	};
+
+	pinctrl_mdio: mdiogrp {
+		fsl,pins = <IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC		0x51e>,
+			   <IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO		0x51e>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO27__GPIO2_IO_BIT27			0x1100>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B	0x111e>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B	0x111e>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK			0x51e>,
+			   <IMX95_PAD_GPIO_IO17__SAI3_MCLK			0x51e>,
+			   <IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0		0x1300>,
+			   <IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0		0x51e>,
+			   <IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC			0x51e>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0		0x51e>,
+			   <IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC			0x51e>,
+			   <IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK			0x51e>,
+			   <IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0		0x1300>;
+	};
+
+	pinctrl_sdvmmc: sdvmmcgrp {
+		fsl,pins = <IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7		0x11e>;
+	};
+
+	pinctrl_tc9595: tc9595grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO25__GPIO2_IO_BIT25			0x1500>;
+	};
+
+	pinctrl_tpm3: tpm3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO04__TPM3_CH0			0x51e>;
+	};
+
+	pinctrl_tpm4: tpm4grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO05__TPM4_CH0			0x51e>;
+	};
+
+	pinctrl_tpm5: tpm4grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO06__TPM5_CH0			0x51e>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK	0x158e>,
+			   <IMX95_PAD_SD1_CMD__USDHC1_CMD	0x138e>,
+			   <IMX95_PAD_SD1_DATA0__USDHC1_DATA0	0x138e>,
+			   <IMX95_PAD_SD1_DATA1__USDHC1_DATA1	0x138e>,
+			   <IMX95_PAD_SD1_DATA2__USDHC1_DATA2	0x138e>,
+			   <IMX95_PAD_SD1_DATA3__USDHC1_DATA3	0x138e>,
+			   <IMX95_PAD_SD1_DATA4__USDHC1_DATA4	0x138e>,
+			   <IMX95_PAD_SD1_DATA5__USDHC1_DATA5	0x138e>,
+			   <IMX95_PAD_SD1_DATA6__USDHC1_DATA6	0x138e>,
+			   <IMX95_PAD_SD1_DATA7__USDHC1_DATA7	0x138e>,
+			   <IMX95_PAD_SD1_STROBE__USDHC1_STROBE	0x158e>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK	0x158e>,
+			   <IMX95_PAD_SD1_CMD__USDHC1_CMD	0x138e>,
+			   <IMX95_PAD_SD1_DATA0__USDHC1_DATA0	0x138e>,
+			   <IMX95_PAD_SD1_DATA1__USDHC1_DATA1	0x138e>,
+			   <IMX95_PAD_SD1_DATA2__USDHC1_DATA2	0x138e>,
+			   <IMX95_PAD_SD1_DATA3__USDHC1_DATA3	0x138e>,
+			   <IMX95_PAD_SD1_DATA4__USDHC1_DATA4	0x138e>,
+			   <IMX95_PAD_SD1_DATA5__USDHC1_DATA5	0x138e>,
+			   <IMX95_PAD_SD1_DATA6__USDHC1_DATA6	0x138e>,
+			   <IMX95_PAD_SD1_DATA7__USDHC1_DATA7	0x138e>,
+			   <IMX95_PAD_SD1_STROBE__USDHC1_STROBE	0x158e>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK	0x15fe>,
+			   <IMX95_PAD_SD1_CMD__USDHC1_CMD	0x13fe>,
+			   <IMX95_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe>,
+			   <IMX95_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe>,
+			   <IMX95_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe>,
+			   <IMX95_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe>,
+			   <IMX95_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe>,
+			   <IMX95_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe>,
+			   <IMX95_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe>,
+			   <IMX95_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe>,
+			   <IMX95_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0			0x1100>,
+			   <IMX95_PAD_SD2_CLK__USDHC2_CLK			0x51e>,
+			   <IMX95_PAD_SD2_CMD__USDHC2_CMD			0x31e>,
+			   <IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x131e>,
+			   <IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x131e>,
+			   <IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x131e>,
+			   <IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x131e>,
+			   <IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0			0x1100>,
+			   <IMX95_PAD_SD2_CLK__USDHC2_CLK			0x158e>,
+			   <IMX95_PAD_SD2_CMD__USDHC2_CMD			0x138e>,
+			   <IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e>,
+			   <IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e>,
+			   <IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e>,
+			   <IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e>,
+			   <IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0			0x1100>,
+			   <IMX95_PAD_SD2_CLK__USDHC2_CLK			0x15fe>,
+			   <IMX95_PAD_SD2_CMD__USDHC2_CMD			0x13fe>,
+			   <IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x13fe>,
+			   <IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x13fe>,
+			   <IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x13fe>,
+			   <IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x13fe>,
+			   <IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
new file mode 100644
index 000000000000..1292677cbe4e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -0,0 +1,2147 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include <dt-bindings/clock/nxp,imx95-clock.h>
+#include <dt-bindings/dma/fsl-edma.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx95-clock.h"
+#include "imx95-pinfunc.h"
+#include "imx95-power.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <10000>;
+				exit-latency-us = <7000>;
+				min-residency-us = <27000>;
+				wakeup-latency-us = <15000>;
+			};
+		};
+
+		A55_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX95_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l0>;
+		};
+
+		A55_1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX95_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l1>;
+		};
+
+		A55_2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX95_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l2>;
+		};
+
+		A55_3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX95_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l3>;
+		};
+
+		A55_4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x400>;
+			power-domains = <&scmi_perf IMX95_PERF_A55>;
+			power-domain-names = "perf";
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l4>;
+		};
+
+		A55_5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x500>;
+			power-domains = <&scmi_perf IMX95_PERF_A55>;
+			power-domain-names = "perf";
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l5>;
+		};
+
+		l2_cache_l0: l2-cache-l0 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l1: l2-cache-l1 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l2: l2-cache-l2 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l3: l2-cache-l3 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l4: l2-cache-l4 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l5: l2-cache-l5 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l3_cache: l3-cache {
+			compatible = "cache";
+			cache-size = <524288>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <3>;
+			cache-unified;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&A55_0>;
+				};
+
+				core1 {
+					cpu = <&A55_1>;
+				};
+
+				core2 {
+					cpu = <&A55_2>;
+				};
+
+				core3 {
+					cpu = <&A55_3>;
+				};
+
+				core4 {
+					cpu = <&A55_4>;
+				};
+
+				core5 {
+					cpu = <&A55_5>;
+				};
+			};
+		};
+	};
+
+	dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "dummy";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	sai1_mclk: clock-sai-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai1_mclk";
+	};
+
+	sai2_mclk: clock-sai-mclk2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai2_mclk";
+	};
+
+	sai3_mclk: clock-sai-mclk3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai3_mclk";
+	};
+
+	sai4_mclk: clock-sai-mclk4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai4_mclk";
+	};
+
+	sai5_mclk: clock-sai-mclk5 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai5_mclk";
+	};
+
+	clk_sys100m: clock-sys100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "clk_sys100m";
+	};
+
+	osc_24m: clock-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	sram1: sram@204c0000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x204c0000 0x0 0x18000>;
+		ranges = <0x0 0x0 0x204c0000 0x18000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	firmware {
+		scmi {
+			compatible = "arm,scmi";
+			mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>, <&mu2 5 1>;
+			shmem = <&scmi_buf0>, <&scmi_buf1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			arm,max-rx-timeout-ms = <5000>;
+
+			scmi_devpd: protocol@11 {
+				reg = <0x11>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_sys_power: protocol@12 {
+				reg = <0x12>;
+			};
+
+			scmi_perf: protocol@13 {
+				reg = <0x13>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_sensor: protocol@15 {
+				reg = <0x15>;
+				#thermal-sensor-cells = <1>;
+			};
+
+			scmi_iomuxc: protocol@19 {
+				reg = <0x19>;
+			};
+
+			scmi_lmm: protocol@80 {
+				reg = <0x80>;
+			};
+
+			scmi_bbm: protocol@81 {
+				reg = <0x81>;
+			};
+
+			scmi_cpu: protocol@82 {
+				reg = <0x82>;
+			};
+
+			scmi_misc: protocol@84 {
+				reg = <0x84>;
+			};
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	thermal_zones: thermal-zones {
+		a55-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&scmi_sensor 1>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		ana-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&scmi_sensor 0>;
+			trips {
+				ana_alert: trip0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ana_crit0: trip1 {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&ana_alert>;
+					cooling-device =
+						<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,no-tick-in-suspend;
+		interrupt-parent = <&gic>;
+	};
+
+	gic: interrupt-controller@48000000 {
+		compatible = "arm,gic-v3";
+		reg = <0 0x48000000 0 0x10000>,
+		      <0 0x48060000 0 0xc0000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		dma-noncoherent;
+		ranges;
+
+		its: msi-controller@48040000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0 0x48040000 0 0x20000>;
+			msi-controller;
+			#msi-cells = <1>;
+			dma-noncoherent;
+		};
+	};
+
+	usbphynop: usbphynop {
+		compatible = "usb-nop-xceiv";
+		clocks = <&scmi_clk IMX95_CLK_HSIO>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		etm0: etm@40840000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x40840000 0x0 0x10000>;
+			arm,primecell-periphid = <0xbb95d>;
+			cpu = <&A55_0>;
+			clocks = <&scmi_clk IMX95_CLK_A55PERIPH>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm0_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		funnel0: funnel {
+			/*
+			 * non-configurable funnel don't show up on the AMBA
+			 * bus.  As such no need to add "arm,primecell".
+			 */
+			compatible = "arm,coresight-static-funnel";
+			status = "disabled";
+
+			in-ports {
+				port {
+					ca_funnel_in_port0: endpoint {
+						remote-endpoint = <&etm0_out_port>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ca_funnel_out_port0: endpoint {
+						remote-endpoint = <&hugo_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		funnel1: funnel-sys {
+			compatible = "arm,coresight-static-funnel";
+			status = "disabled";
+
+			in-ports {
+				port {
+					hugo_funnel_in_port0: endpoint {
+						remote-endpoint = <&ca_funnel_out_port0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					hugo_funnel_out_port0: endpoint {
+						remote-endpoint = <&etf_in_port>;
+					};
+				};
+			};
+		};
+
+		etf: etf@41030000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x41030000 0x0 0x1000>;
+			clocks = <&scmi_clk IMX95_CLK_A55PERIPH>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+
+			in-ports {
+				port {
+					etf_in_port: endpoint {
+						remote-endpoint = <&hugo_funnel_out_port0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out_port: endpoint {
+						remote-endpoint = <&etr_in_port>;
+					};
+				};
+			};
+		};
+
+		etr: etr@41040000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x41040000 0x0 0x1000>;
+			clocks = <&scmi_clk IMX95_CLK_A55PERIPH>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+
+			in-ports {
+				port {
+					etr_in_port: endpoint {
+						remote-endpoint = <&etf_out_port>;
+					};
+				};
+			};
+		};
+
+		aips2: bus@42000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x42000000 0x0 0x800000>;
+			ranges = <0x42000000 0x0 0x42000000 0x8000000>,
+				 <0x28000000 0x0 0x28000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			edma2: dma-controller@42000000 {
+				compatible = "fsl,imx95-edma5";
+				reg = <0x42000000 0x210000>;
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "dma";
+			};
+
+			edma3: dma-controller@42210000 {
+				compatible = "fsl,imx95-edma5";
+				reg = <0x42210000 0x210000>;
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "dma";
+			};
+
+			mu7: mailbox@42430000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x42430000 0x10000>;
+				interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@42490000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x42490000 0x10000>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			tpm3: pwm@424e0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424e0000 0x1000>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm4: pwm@424f0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424f0000 0x1000>;
+				clocks = <&scmi_clk IMX95_CLK_TPM4>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm5: pwm@42500000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42500000 0x1000>;
+				clocks = <&scmi_clk IMX95_CLK_TPM5>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm6: pwm@42510000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42510000 0x1000>;
+				clocks = <&scmi_clk IMX95_CLK_TPM6>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i3c2: i3c@42520000 {
+				compatible = "nxp,imx95-i3c", "silvaco,i3c-master-v1";
+				reg = <0x42520000 0x10000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>,
+					 <&scmi_clk IMX95_CLK_I3C2SLOW>;
+				clock-names = "pclk", "fast_clk";
+				status = "disabled";
+			};
+
+			lpi2c3: i2c@42530000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42530000 0x10000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C3>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&edma2 8 0 0>, <&edma2 9 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c4: i2c@42540000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42540000 0x10000>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C4>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&edma2 10 0 0>, <&edma2 11 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi3: spi@42550000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x42550000 0x10000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI3>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 12 0 0>, <&edma2 13 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi4: spi@42560000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x42560000 0x10000>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI4>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 14 0 0>, <&edma2 15 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart3: serial@42570000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42570000 0x1000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART3>;
+				clock-names = "ipg";
+				dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart4: serial@42580000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42580000 0x1000>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART4>;
+				clock-names = "ipg";
+				dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart5: serial@42590000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42590000 0x1000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART5>;
+				clock-names = "ipg";
+				dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart6: serial@425a0000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x425a0000 0x1000>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART6>;
+				clock-names = "ipg";
+				dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan2: can@425b0000 {
+				compatible = "fsl,imx95-flexcan";
+				reg = <0x425b0000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_CAN2>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_CAN2>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			flexcan3: can@42600000 {
+				compatible = "fsl,imx95-flexcan";
+				reg = <0x42600000 0x10000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_CAN3>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_CAN3>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			flexspi1: spi@425e0000 {
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x425e0000 0x10000>, <0x28000000 0x8000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_FLEXSPI1>,
+					 <&scmi_clk IMX95_CLK_FLEXSPI1>;
+				clock-names = "fspi_en", "fspi";
+				assigned-clocks = <&scmi_clk IMX95_CLK_FLEXSPI1>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <200000000>;
+				status = "disabled";
+			};
+
+			sai3: sai@42650000 {
+				compatible = "fsl,imx95-sai";
+				reg = <0x42650000 0x10000>;
+				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>,
+					 <&scmi_clk IMX95_CLK_SAI3>, <&dummy>,
+					 <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai4: sai@42660000 {
+				compatible = "fsl,imx95-sai";
+				reg = <0x42660000 0x10000>;
+				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>,
+					 <&scmi_clk IMX95_CLK_SAI4>, <&dummy>,
+					 <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 68 0 FSL_EDMA_RX>, <&edma2 67 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai5: sai@42670000 {
+				compatible = "fsl,imx95-sai";
+				reg = <0x42670000 0x10000>;
+				interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>,
+					 <&scmi_clk IMX95_CLK_SAI5>, <&dummy>,
+					 <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 70 0 FSL_EDMA_RX>, <&edma2 69 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			xcvr: xcvr@42680000 {
+				compatible = "fsl,imx95-xcvr";
+				reg = <0x42680000 0x800>, <0x42680800 0x400>,
+				      <0x42680c00 0x080>, <0x42680e00 0x080>;
+				reg-names = "ram", "regs", "rxfifo", "txfifo";
+				interrupts = /* XCVR IRQ 0 */
+					     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					     /* XCVR IRQ 1 */
+					     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_SPDIF>,
+					 <&dummy>,
+					 <&scmi_clk IMX95_CLK_AUDIOXCVR>;
+				clock-names = "ipg", "phy", "spba", "pll_ipg";
+				dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart7: serial@42690000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42690000 0x1000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART7>;
+				clock-names = "ipg";
+				dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart8: serial@426a0000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x426a0000 0x1000>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART8>;
+				clock-names = "ipg";
+				dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpi2c5: i2c@426b0000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426b0000 0x10000>;
+				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C5>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&edma2 71 0 0>, <&edma2 72 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c6: i2c@426c0000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426c0000 0x10000>;
+				interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C6>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&edma2 73 0 0>, <&edma2 74 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c7: i2c@426d0000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426d0000 0x10000>;
+				interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C7>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&edma2 75 0 0>, <&edma2 76 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c8: i2c@426e0000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426e0000 0x10000>;
+				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C8>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&edma2 77 0 0>, <&edma2 78 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi5: spi@426f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x426f0000 0x10000>;
+				interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI5>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 79 0 0>, <&edma2 80 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi6: spi@42700000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x42700000 0x10000>;
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI6>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 81 0 0>, <&edma2 82 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi7: spi@42710000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x42710000 0x10000>;
+				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI7>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 83 0 0>, <&edma2 84 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi8: spi@42720000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x42720000 0x10000>;
+				interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI8>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 85 0 0>, <&edma2 86 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			mu8: mailbox@42730000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x42730000 0x10000>;
+				interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			flexcan4: can@427c0000 {
+				compatible = "fsl,imx95-flexcan";
+				reg = <0x427c0000 0x10000>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_CAN4>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_CAN4>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			flexcan5: can@427d0000 {
+				compatible = "fsl,imx95-flexcan";
+				reg = <0x427d0000 0x10000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_CAN5>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_CAN5>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+		};
+
+		aips3: bus@42800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0 0x42800000 0 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x42800000 0x0 0x42800000 0x800000>;
+
+			usdhc1: mmc@42850000 {
+				compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42850000 0x10000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX95_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_USDHC1>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <8>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@42860000 {
+				compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42860000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX95_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_USDHC2>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@428b0000 {
+				compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x428b0000 0x10000>;
+				interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX95_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_USDHC3>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+		};
+
+		gpio2: gpio@43810000 {
+			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43810000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&scmi_iomuxc 0 4 32>;
+			ngpios = <32>;
+		};
+
+		gpio3: gpio@43820000 {
+			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43820000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&scmi_iomuxc 0 104 8>, <&scmi_iomuxc 8 74 18>,
+				      <&scmi_iomuxc 26 42 2>, <&scmi_iomuxc 28 0 4>;
+			ngpios = <32>;
+		};
+
+		gpio4: gpio@43840000 {
+			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43840000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&scmi_iomuxc 0 46 28>, <&scmi_iomuxc 28 44 2>;
+			ngpios = <30>;
+		};
+
+		gpio5: gpio@43850000 {
+			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43850000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&scmi_iomuxc 0 92 12>, <&scmi_iomuxc 12 36 6>;
+			ngpios = <18>;
+		};
+
+		aips1: bus@44000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x44000000 0x0 0x800000>;
+			ranges = <0x44000000 0x0 0x44000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			edma1: dma-controller@44000000 {
+				compatible = "fsl,imx93-edma3";
+				reg = <0x44000000 0x200000>;
+				#dma-cells = <3>;
+				dma-channels = <31>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+				clock-names = "dma";
+			};
+
+			mu1: mailbox@44220000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x44220000 0x10000>;
+				interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			system_counter: timer@44290000 {
+				compatible = "nxp,imx95-sysctr-timer";
+				reg = <0x44290000 0x30000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+				nxp,no-divider;
+			};
+
+			tpm1: pwm@44310000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44310000 0x1000>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm2: pwm@44320000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44320000 0x1000>;
+				clocks = <&scmi_clk IMX95_CLK_TPM2>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i3c1: i3c@44330000 {
+				compatible = "nxp,imx95-i3c", "silvaco,i3c-master-v1";
+				reg = <0x44330000 0x10000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>,
+					 <&scmi_clk IMX95_CLK_I3C1SLOW>;
+				clock-names = "pclk", "fast_clk";
+				status = "disabled";
+			};
+
+			lpi2c1: i2c@44340000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44340000 0x10000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C1>,
+					 <&scmi_clk IMX95_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&edma1 12 0 0>, <&edma1 13 0 FSL_EDMA_RX> ;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c2: i2c@44350000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44350000 0x10000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C2>,
+					 <&scmi_clk IMX95_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&edma1 14 0 0>, <&edma1 15 0 FSL_EDMA_RX> ;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi1: spi@44360000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x44360000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI1>,
+					 <&scmi_clk IMX95_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 16 0 FSL_EDMA_RX>, <&edma1 17 0 0> ;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi2: spi@44370000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x44370000 0x10000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI2>,
+					 <&scmi_clk IMX95_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 18 0 FSL_EDMA_RX>, <&edma1 19 0 0> ;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart1: serial@44380000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x44380000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART1>;
+				clock-names = "ipg";
+				dmas = <&edma1 21 0 FSL_EDMA_RX>, <&edma1 20 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart2: serial@44390000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x44390000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART2>;
+				clock-names = "ipg";
+				dmas = <&edma1 23 0 FSL_EDMA_RX>, <&edma1 22 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan1: can@443a0000 {
+				compatible = "fsl,imx95-flexcan";
+				reg = <0x443a0000 0x10000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>,
+					 <&scmi_clk IMX95_CLK_CAN1>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_CAN1>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			sai1: sai@443b0000 {
+				compatible = "fsl,imx95-sai";
+				reg = <0x443b0000 0x10000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>, <&dummy>,
+					 <&scmi_clk IMX95_CLK_SAI1>, <&dummy>,
+					 <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 25 0 FSL_EDMA_RX>, <&edma1 24 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			micfil: micfil@44520000 {
+				compatible = "fsl,imx95-micfil", "fsl,imx93-micfil";
+				reg = <0x44520000 0x10000>;
+				interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>,
+					 <&scmi_clk IMX95_CLK_PDM>,
+					 <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+					 <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+					 <&dummy>;
+				clock-names = "ipg_clk", "ipg_clk_app",
+					      "pll8k", "pll11k", "clkext3";
+				dmas = <&edma1 6 0 5>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			adc1: adc@44530000 {
+				compatible = "nxp,imx93-adc";
+				reg = <0x44530000 0x10000>;
+				interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_ADC>;
+				clock-names = "ipg";
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			mu2: mailbox@445b0000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x445b0000 0x1000>;
+				ranges;
+				interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#mbox-cells = <2>;
+
+				sram0: sram@445b1000 {
+					compatible = "mmio-sram";
+					reg = <0x445b1000 0x400>;
+					ranges = <0x0 0x445b1000 0x400>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					scmi_buf0: scmi-sram-section@0 {
+						compatible = "arm,scmi-shmem";
+						reg = <0x0 0x80>;
+					};
+
+					scmi_buf1: scmi-sram-section@80 {
+						compatible = "arm,scmi-shmem";
+						reg = <0x80 0x80>;
+					};
+				};
+
+			};
+
+			mu3: mailbox@445d0000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x445d0000 0x10000>;
+				interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu4: mailbox@445f0000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x445f0000 0x10000>;
+				interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu6: mailbox@44630000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x44630000 0x10000>;
+				interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		mailbox@47300000 {
+			compatible = "fsl,imx95-mu-v2x";
+			reg = <0x0 0x47300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		mailbox@47320000 {
+			compatible = "fsl,imx95-mu-v2x";
+			reg = <0x0 0x47320000 0x0 0x10000>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		mailbox@47330000 {
+			compatible = "fsl,imx95-mu-v2x";
+			reg = <0x0 0x47330000 0x0 0x10000>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		mailbox@47340000 {
+			compatible = "fsl,imx95-mu-v2x";
+			reg = <0x0 0x47340000 0x0 0x10000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		mailbox@47350000 {
+			compatible = "fsl,imx95-mu-v2x";
+			reg = <0x0 0x47350000 0x0 0x10000>;
+			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		/* GPIO1 is under exclusive control of System Manager */
+		gpio1: gpio@47400000 {
+			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x47400000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&scmi_clk IMX95_CLK_M33>,
+				 <&scmi_clk IMX95_CLK_M33>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&scmi_iomuxc 0 112 16>;
+			ngpios = <16>;
+			status = "disabled";
+		};
+
+		ocotp: efuse@47510000 {
+			compatible = "fsl,imx95-ocotp", "syscon";
+			reg = <0x0 0x47510000 0x0 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth_mac0: mac-address@0 {
+				reg = <0x0514 0x6>;
+			};
+
+			eth_mac1: mac-address@1 {
+				reg = <0x1514 0x6>;
+			};
+
+			eth_mac2: mac-address@2 {
+				reg = <0x2514 0x6>;
+			};
+		};
+
+		elemu0: mailbox@47520000 {
+			compatible = "fsl,imx95-mu-ele";
+			reg = <0x0 0x47520000 0x0 0x10000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		elemu1: mailbox@47530000 {
+			compatible = "fsl,imx95-mu-ele";
+			reg = <0x0 0x47530000 0x0 0x10000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		elemu2: mailbox@47540000 {
+			compatible = "fsl,imx95-mu-ele";
+			reg = <0x0 0x47540000 0x0 0x10000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		elemu3: mailbox@47550000 {
+			compatible = "fsl,imx95-mu-ele";
+			reg = <0x0 0x47550000 0x0 0x10000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		elemu4: mailbox@47560000 {
+			compatible = "fsl,imx95-mu-ele";
+			reg = <0x0 0x47560000 0x0 0x10000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		elemu5: mailbox@47570000 {
+			compatible = "fsl,imx95-mu-ele";
+			reg = <0x0 0x47570000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		aips4: bus@49000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x49000000 0x0 0x800000>;
+			ranges = <0x49000000 0x0 0x49000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			smmu: iommu@490d0000 {
+				compatible = "arm,smmu-v3";
+				reg = <0x490d0000 0x100000>;
+				interrupts = <GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 334 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 326 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+				#iommu-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		usb3: usb@4c010010 {
+			compatible = "fsl,imx95-dwc3", "fsl,imx8mp-dwc3";
+			reg = <0x0 0x4c010010 0x0 0x04>,
+			      <0x0 0x4c1f0000 0x0 0x20>;
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_32K>;
+			clock-names = "hsio", "suspend";
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
+			status = "disabled";
+
+			usb3_dwc3: usb@4c100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x4c100000 0x0 0x10000>;
+				clocks = <&scmi_clk IMX95_CLK_HSIO>,
+					 <&scmi_clk IMX95_CLK_24M>,
+					 <&scmi_clk IMX95_CLK_32K>;
+				clock-names = "bus_early", "ref", "suspend";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_phy>, <&usb3_phy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,parkmode-disable-ss-quirk;
+				iommus = <&smmu 0xe>;
+			};
+		};
+
+		hsio_blk_ctl: syscon@4c0100c0 {
+			compatible = "nxp,imx95-hsio-blk-ctl", "syscon";
+			reg = <0x0 0x4c0100c0 0x0 0x1>;
+			#clock-cells = <1>;
+			clocks = <&clk_sys100m>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+		};
+
+		usb3_phy: phy@4c1f0040 {
+			compatible = "fsl,imx95-usb-phy", "fsl,imx8mp-usb-phy";
+			reg = <0x0 0x4c1f0040 0x0 0x40>,
+			      <0x0 0x4c1fc000 0x0 0x100>;
+			clocks = <&scmi_clk IMX95_CLK_HSIO>;
+			clock-names = "phy";
+			#phy-cells = <0>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			status = "disabled";
+		};
+
+		usb2: usb@4c200000 {
+			compatible = "fsl,imx95-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+			reg = <0x0 0x4c200000 0x0 0x200>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_32K>;
+			clock-names = "usb_ctrl_root", "usb_wakeup";
+			iommus = <&smmu 0xf>;
+			phys = <&usbphynop>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			fsl,usbmisc = <&usbmisc 0>;
+			status = "disabled";
+		};
+
+		usbmisc: usbmisc@4c200200 {
+			compatible = "fsl,imx95-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
+			reg = <0x0 0x4c200200 0x0 0x200>,
+			      <0x0 0x4c010014 0x0 0x04>;
+			#index-cells = <1>;
+		};
+
+		pcie0: pcie@4c300000 {
+			compatible = "fsl,imx95-pcie";
+			reg = <0 0x4c300000 0 0x10000>,
+			      <0 0x60100000 0 0xfe00000>,
+			      <0 0x4c360000 0 0x10000>,
+			      <0 0x4c340000 0 0x4000>;
+			reg-names = "dbi", "config", "atu", "app";
+			ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>,
+				 <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x10000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			num-viewport = <8>;
+			interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
+				 <&hsio_blk_ctl 0>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
+			assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX95_CLK_HSIOPLL>,
+					  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			/* pcie0's Devid(BIT[7:6]) is 0x00, stream id(BIT[5:0]) is 0x10~0x17 */
+			msi-map = <0x0 &its 0x10 0x1>,
+				  <0x100 &its 0x11 0x7>;
+			iommu-map = <0x000 &smmu 0x10 0x1>,
+				    <0x100 &smmu 0x11 0x7>;
+			iommu-map-mask = <0x1ff>;
+			fsl,max-link-speed = <3>;
+			status = "disabled";
+		};
+
+		pcie0_ep: pcie-ep@4c300000 {
+			compatible = "fsl,imx95-pcie-ep";
+			reg = <0 0x4c300000 0 0x10000>,
+			      <0 0x4c360000 0 0x1000>,
+			      <0 0x4c320000 0 0x1000>,
+			      <0 0x4c340000 0 0x4000>,
+			      <0 0x4c370000 0 0x10000>,
+			      <0x9 0 1 0>;
+			reg-names = "dbi","atu", "dbi2", "app", "dma", "addr_space";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX95_CLK_HSIOPLL>,
+					  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+			msi-map = <0x0 &its 0x98 0x1>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			status = "disabled";
+		};
+
+		pcie1: pcie@4c380000 {
+			compatible = "fsl,imx95-pcie";
+			reg = <0 0x4c380000 0 0x10000>,
+			      <8 0x80100000 0 0xfe00000>,
+			      <0 0x4c3e0000 0 0x10000>,
+			      <0 0x4c3c0000 0 0x4000>;
+			reg-names = "dbi", "config", "atu", "app";
+			ranges = <0x81000000 0 0x00000000 0x8 0x8ff00000 0 0x00100000>,
+				 <0x82000000 0 0x10000000 0xa 0x10000000 0 0x10000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			num-viewport = <8>;
+			interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
+				 <&hsio_blk_ctl 0>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
+			assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX95_CLK_HSIOPLL>,
+					  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			/* pcie1's Devid(BIT[7:6]) is 0x10, stream id(BIT[5:0]) is 0x18~0x1f */
+			msi-map = <0x0 &its 0x98 0x1>,
+				  <0x100 &its 0x99 0x7>;
+			msi-map-mask = <0x1ff>;
+			/* smmu have not Devid(BIT[7:6]) */
+			iommu-map = <0x000 &smmu 0x18 0x1>,
+				    <0x100 &smmu 0x19 0x7>;
+			iommu-map-mask = <0x1ff>;
+			fsl,max-link-speed = <3>;
+			status = "disabled";
+		};
+
+		pcie1_ep: pcie-ep@4c380000 {
+			compatible = "fsl,imx95-pcie-ep";
+			reg = <0 0x4c380000 0 0x10000>,
+			      <0 0x4c3e0000 0 0x1000>,
+			      <0 0x4c3a0000 0 0x1000>,
+			      <0 0x4c3c0000 0 0x4000>,
+			      <0 0x4c3f0000 0 0x10000>,
+			      <0xa 0 1 0>;
+			reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX95_CLK_HSIOPLL>,
+					  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			status = "disabled";
+		};
+
+		vpu_blk_ctrl: clock-controller@4c410000 {
+			compatible = "nxp,imx95-vpu-csr", "syscon";
+			reg = <0x0 0x4c410000 0x0 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&scmi_clk IMX95_CLK_VPUAPB>;
+			power-domains = <&scmi_devpd IMX95_PD_VPU>;
+			assigned-clocks = <&scmi_clk IMX95_CLK_VPUAPB>,
+					  <&scmi_clk IMX95_CLK_VPU>,
+					  <&scmi_clk IMX95_CLK_VPUJPEG>;
+			assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD2>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD0>;
+			assigned-clock-rates = <133333333>, <667000000>, <500000000>;
+		};
+
+		jpegdec: jpegdec@4c500000 {
+			compatible = "nxp,imx95-jpgdec", "nxp,imx8qxp-jpgdec";
+			reg = <0x0 0x4C500000 0x0 0x00050000>;
+			interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_VPU>,
+				 <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>;
+			assigned-clocks = <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>;
+			assigned-clock-parents = <&scmi_clk IMX95_CLK_VPUJPEG>;
+			power-domains = <&scmi_devpd IMX95_PD_VPU>;
+		};
+
+		jpegenc: jpegenc@4c550000 {
+			compatible = "nxp,imx95-jpgenc", "nxp,imx8qxp-jpgenc";
+			reg = <0x0 0x4C550000 0x0 0x00050000>;
+			interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_VPU>,
+				 <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_ENC>;
+			assigned-clocks = <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_ENC>;
+			assigned-clock-parents = <&scmi_clk IMX95_CLK_VPUJPEG>;
+			power-domains = <&scmi_devpd IMX95_PD_VPU>;
+		};
+
+		netcmix_blk_ctrl: syscon@4c810000 {
+			compatible = "nxp,imx95-netcmix-blk-ctrl", "syscon";
+			reg = <0x0 0x4c810000 0x0 0x8>;
+			#clock-cells = <1>;
+			clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>;
+			assigned-clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>;
+			assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+			assigned-clock-rates = <133333333>;
+			power-domains = <&scmi_devpd IMX95_PD_NETC>;
+			status = "disabled";
+		};
+
+		sai2: sai@4c880000 {
+			compatible = "fsl,imx95-sai";
+			reg = <0x0 0x4c880000 0x0 0x10000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>, <&dummy>,
+				 <&scmi_clk IMX95_CLK_SAI2>, <&dummy>,
+				 <&dummy>;
+			clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+			power-domains = <&scmi_devpd IMX95_PD_NETC>;
+			dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		netc_blk_ctrl: system-controller@4cde0000 {
+			compatible = "nxp,imx95-netc-blk-ctrl";
+			reg = <0x0 0x4cde0000 0x0 0x10000>,
+			      <0x0 0x4cdf0000 0x0 0x10000>,
+			      <0x0 0x4c81000c 0x0 0x18>;
+			reg-names = "ierb", "prb", "netcmix";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			power-domains = <&scmi_devpd IMX95_PD_NETC>;
+			assigned-clocks = <&scmi_clk IMX95_CLK_ENET>,
+					  <&scmi_clk IMX95_CLK_ENETREF>;
+			assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD2>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD0>;
+			assigned-clock-rates = <666666666>, <250000000>;
+			clocks = <&scmi_clk IMX95_CLK_ENET>;
+			clock-names = "ipg";
+			status = "disabled";
+
+			netc_bus0: pcie@4ca00000 {
+				compatible = "pci-host-ecam-generic";
+				reg = <0x0 0x4ca00000 0x0 0x100000>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				bus-range = <0x0 0x0>;
+				msi-map = <0x0 &its 0x60 0x1>,	//ENETC0 PF
+					  <0x10 &its 0x61 0x1>, //ENETC0 VF0
+					  <0x20 &its 0x62 0x1>, //ENETC0 VF1
+					  <0x40 &its 0x63 0x1>, //ENETC1 PF
+					  <0x80 &its 0x64 0x1>, //ENETC2 PF
+					  <0x90 &its 0x65 0x1>, //ENETC2 VF0
+					  <0xa0 &its 0x66 0x1>, //ENETC2 VF1
+					  <0xc0 &its 0x67 0x1>; //NETC Timer
+				iommu-map = <0x0 &smmu 0x20 0x1>,
+					    <0x10 &smmu 0x21 0x1>,
+					    <0x20 &smmu 0x22 0x1>,
+					    <0x40 &smmu 0x23 0x1>,
+					    <0x80 &smmu 0x24 0x1>,
+					    <0x90 &smmu 0x25 0x1>,
+					    <0xa0 &smmu 0x26 0x1>,
+					    <0xc0 &smmu 0x27 0x1>;
+					 /* ENETC0~2 and Timer BAR0 - non-prefetchable memory */
+				ranges = <0x82000000 0x0 0x4cc00000  0x0 0x4cc00000  0x0 0xe0000
+					 /* Timer BAR2 - prefetchable memory */
+					 0xc2000000 0x0 0x4cd00000  0x0 0x4cd00000  0x0 0x10000
+					 /* ENETC0~2: VF0-1 BAR0 - non-prefetchable memory */
+					 0x82000000 0x0 0x4cd20000  0x0 0x4cd20000  0x0 0x60000
+					 /* ENETC0~2: VF0-1 BAR2 - prefetchable memory */
+					 0xc2000000 0x0 0x4cd80000  0x0 0x4cd80000  0x0 0x60000>;
+
+				enetc_port0: ethernet@0,0 {
+					compatible = "pci1131,e101";
+					reg = <0x000000 0 0 0 0>;
+					clocks = <&scmi_clk IMX95_CLK_ENETREF>;
+					clock-names = "ref";
+					status = "disabled";
+				};
+
+				enetc_port1: ethernet@8,0 {
+					compatible = "pci1131,e101";
+					reg = <0x004000 0 0 0 0>;
+					clocks = <&scmi_clk IMX95_CLK_ENETREF>;
+					clock-names = "ref";
+					status = "disabled";
+				};
+
+				enetc_port2: ethernet@10,0 {
+					compatible = "pci1131,e101";
+					reg = <0x008000 0 0 0 0>;
+					status = "disabled";
+				};
+
+				netc_timer: ethernet@18,0 {
+					compatible = "pci1131,ee02";
+					reg = <0x00c000 0 0 0 0>;
+					status = "disabled";
+				};
+			};
+
+			netc_bus1: pcie@4cb00000 {
+				compatible = "pci-host-ecam-generic";
+				reg = <0x0 0x4cb00000 0x0 0x100000>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				bus-range = <0x1 0x1>;
+					 /* EMDIO BAR0 - non-prefetchable memory */
+				ranges = <0x82000000 0x0 0x4cce0000  0x0 0x4cce0000  0x0 0x20000
+					 /* EMDIO BAR2 - prefetchable memory */
+					 0xc2000000 0x0 0x4cd10000  0x0 0x4cd10000  0x0 0x10000>;
+
+				netc_emdio: mdio@0,0 {
+					compatible = "pci1131,ee00";
+					reg = <0x010000 0 0 0 0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+				};
+			};
+		};
+
+		ddr-pmu@4e090dc0 {
+			compatible = "fsl,imx95-ddr-pmu", "fsl,imx93-ddr-pmu";
+			reg = <0x0 0x4e090dc0 0x0 0x200>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index 104bdd4e437a..79daba930ad6 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -8,6 +8,16 @@
 /* TQ-Systems GmbH MBa8Mx baseboard */
 
 / {
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
 	beeper {
 		compatible = "pwm-beeper";
 		pwms = <&pwm4 0 250000 0>;
@@ -19,6 +29,12 @@
 		stdout-path = &uart3;
 	};
 
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -65,10 +81,36 @@
 		};
 	};
 
-	pcie0_refclk: pcie0-refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
+	gpio_delays: gpio-delays {
+		compatible = "gpio-delay";
+		#gpio-cells = <3>;
+		gpio-controller;
+		gpios = <&expander0 6 GPIO_ACTIVE_HIGH>;
+		gpio-line-names = "LVDS_BRIDGE_EN_1V8";
+	};
+
+	panel: panel-lvds {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_vcc_3v3>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds: endpoint {
+				remote-endpoint = <&lvds_bridge_out>;
+			};
+		};
+	};
+
+	reg_12v: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "MBA8MX_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
 	};
 
 	reg_hub_vbus: regulator-hub-vbus {
@@ -94,9 +136,9 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	sound {
+	sound: sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
 		ssi-controller = <&sai3>;
 		audio-codec = <&tlv320aic3x04>;
 	};
@@ -142,6 +184,8 @@
 			reset-gpios = <&expander2 7 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <500000>;
 			reset-deassert-us = <500>;
+			interrupt-parent = <&expander2>;
+			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
 		};
 	};
 };
@@ -157,6 +201,10 @@
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+		gpio-line-names = "", "", "", "",
+				  "", "", "LVDS_BRIDGE_EN", "",
+				  "", "", "", "",
+				  "", "", "", "";
 
 		sd-mux-oe-hog {
 			gpio-hog;
@@ -172,7 +220,7 @@
 			line-name = "BOOT_CFG_OE#";
 		};
 
-		rst-usb-hub-hog {
+		rst_usb_hub_hog: rst-usb-hub-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			output-high;
@@ -190,7 +238,6 @@
 };
 
 &i2c2 {
-	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	pinctrl-1 = <&pinctrl_i2c2_gpio>;
@@ -206,26 +253,73 @@
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
-	sensor1: sensor@1f {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor1: temperator-sensor@1f {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1f>;
 	};
 
+	/*
+	 * TUSB8041 is at 0x41, but not connected by default
+	 * Note: TUSB8041 only supports 100 kHz!
+	 */
+
 	eeprom3: eeprom@57 {
 		compatible = "nxp,se97b", "atmel,24c02";
 		reg = <0x57>;
 		pagesize = <16>;
+		vcc-supply = <&reg_vcc_3v3>;
+	};
+
+	pcieclk: clk@68 {
+		compatible = "renesas,9fgv0441";
+		reg = <0x68>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
 	};
 };
 
 &i2c3 {
-	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	pinctrl-1 = <&pinctrl_i2c3_gpio>;
 	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
+
+	dsi_lvds_bridge: bridge@2d {
+		compatible = "ti,sn65dsi84";
+		reg = <0x2d>;
+		enable-gpios = <&gpio_delays 0 130000 0>;
+		vcc-supply = <&reg_sn65dsi83_1v8>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_bridge_in: endpoint {
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&mipi_dsi_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lvds_bridge_out: endpoint {
+					remote-endpoint = <&panel_in_lvds>;
+				};
+			};
+		};
+	};
+};
+
+&mipi_dsi_out {
+	data-lanes = <1 2 3 4>;
+	remote-endpoint = <&lvds_bridge_in>;
 };
 
 &pwm3 {
diff --git a/arch/arm64/boot/dts/freescale/mba8xx.dtsi b/arch/arm64/boot/dts/freescale/mba8xx.dtsi
new file mode 100644
index 000000000000..c4b5663949ad
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/mba8xx.dtsi
@@ -0,0 +1,575 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	adc {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>;
+	};
+
+	aliases {
+		rtc0 = &pcf85063;
+		rtc1 = &rtc;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bl_lvds>;
+		pwms = <&adma_pwm 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&lsio_gpio1 30 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	/* Non-controllable PCIe reference clock generator */
+	pcie_refclk: clock-pcie-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobuttons>;
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&lsio_gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&lsio_gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* TODO LVDS panels */
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pcie_1v5: regulator-pcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "MBA8XX_PCIE_1V5";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_pcie_1v5>;
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&lsio_gpio0 30 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <1000>;
+		enable-active-high;
+	};
+
+	reg_pcie_3v3: regulator-pcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MBA8XX_PCIE_3V3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_pcie_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <1000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_3v3_mb: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		audio-codec = <&tlv320aic3x04>;
+		ssi-controller = <&sai1>;
+	};
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0>;
+	vref-supply = <&reg_1v8>;
+	#io-channel-cells = <1>;
+	status = "okay";
+};
+
+&adma_pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_admapwm>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&lsio_gpio3 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&lsio_gpio3>;
+			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		};
+
+		ethphy3: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ethphy3>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&lsio_gpio3 3 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&lsio_gpio3>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec2>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-x2-pcieb";
+	fsl,refclk-pad-mode = "input";
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&mclkout0_lpcg 0>;
+		clock-names = "mclk";
+		iov-supply = <&reg_1v8>;
+		ldoin-supply = <&reg_3v3>;
+	};
+
+	se97b_1c: temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	at24c02_54: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9538>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&lsio_gpio4>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_1v8>;
+
+		gpio-line-names = "", "LED_A",
+				  "LED_B", "",
+				  "DSI_EN", "USB_RESET#",
+				  "V_12V_EN", "PCIE_DIS#";
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-1 = <&pinctrl_lpi2c2gpio>;
+	scl-gpios = <&lsio_gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&lsio_gpio2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* TODO LDB */
+
+&lpspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	cs-gpios = <&lsio_gpio0 27 GPIO_ACTIVE_LOW>, <&lsio_gpio0 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&lpspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&lpspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi3>;
+	num-cs = <2>;
+	cs-gpios = <&lsio_gpio0 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+	status = "okay";
+};
+
+&lsio_gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lsgpio3>;
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "X4_15",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&pcieb {
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_1v5>;
+	status = "okay";
+};
+
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg 0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	over-current-active-low;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3v3_mb>;
+	no-1-8-v;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_adc0: adc0grp {
+		fsl,pins = <IMX8QXP_ADC_IN0_ADMA_ADC_IN0	0x02000060>,
+			   <IMX8QXP_ADC_IN1_ADMA_ADC_IN1	0x02000060>,
+			   <IMX8QXP_ADC_IN2_ADMA_ADC_IN2	0x02000060>,
+			   <IMX8QXP_ADC_IN3_ADMA_ADC_IN3	0x02000060>;
+	};
+
+	pinctrl_admapwm: admapwmgrp {
+		fsl,pins = <IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT	0x00000021>;
+	};
+
+	pinctrl_bl_lvds: bllvdsgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO30	0x00000021>;
+	};
+
+	pinctrl_can0: can0grp {
+		fsl,pins = <IMX8QXP_UART0_RX_ADMA_FLEXCAN0_RX		0x00000021>,
+			   <IMX8QXP_UART0_TX_ADMA_FLEXCAN0_TX		0x00000021>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <IMX8QXP_UART2_RX_ADMA_FLEXCAN1_RX		0x00000021>,
+			   <IMX8QXP_UART2_TX_ADMA_FLEXCAN1_TX		0x00000021>;
+	};
+
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <IMX8QXP_CSI_EN_LSIO_GPIO3_IO02		0x00000040>,
+			   <IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00		0x00000040>;
+	};
+
+	pinctrl_ethphy3: ethphy3grp {
+		fsl,pins = <IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03		0x00000040>,
+			   <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01		0x00000040>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000041>,
+			   <IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000041>,
+			   <IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x00000040>;
+	};
+
+	pinctrl_fec2: fec2grp {
+		fsl,pins = <IMX8QXP_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL		0x00000040>,
+			   <IMX8QXP_ESAI0_FSR_CONN_ENET1_RGMII_TXC		0x00000040>,
+			   <IMX8QXP_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0		0x00000040>,
+			   <IMX8QXP_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1		0x00000040>,
+			   <IMX8QXP_ESAI0_FST_CONN_ENET1_RGMII_TXD2		0x00000040>,
+			   <IMX8QXP_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3		0x00000040>,
+			   <IMX8QXP_ESAI0_TX0_CONN_ENET1_RGMII_RXC		0x00000040>,
+			   <IMX8QXP_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL		0x00000040>,
+			   <IMX8QXP_SPDIF0_RX_CONN_ENET1_RGMII_RXD0		0x00000040>,
+			   <IMX8QXP_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1		0x00000040>,
+			   <IMX8QXP_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2		0x00000040>,
+			   <IMX8QXP_ESAI0_TX1_CONN_ENET1_RGMII_RXD3		0x00000040>;
+	};
+
+	pinctrl_gpiobuttons: gpiobuttonsgrp {
+		fsl,pins = <IMX8QXP_ADC_IN5_LSIO_GPIO1_IO13	0x00000020>,
+			   <IMX8QXP_ADC_IN4_LSIO_GPIO1_IO14	0x00000020>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_ADMA_I2C2_SCL	0x06000021>,
+			   <IMX8QXP_MIPI_DSI1_GPIO0_01_ADMA_I2C2_SDA	0x06000021>;
+	};
+
+	pinctrl_lpi2c2gpio: lpi2c2gpiogrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO31	0x06000021>,
+			   <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00	0x06000021>;
+	};
+
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <IMX8QXP_UART1_RX_ADMA_UART1_RX	0x06000020>,
+			   <IMX8QXP_UART1_TX_ADMA_UART1_TX	0x06000020>;
+	};
+
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX	0x06000020>,
+			   <IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX	0x06000020>;
+	};
+
+	pinctrl_lsgpio3: lsgpio3grp {
+		fsl,pins = <IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15	0x00000021>;
+	};
+
+	pinctrl_pca9538: pca9538grp {
+		fsl,pins = <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19	0x00000020>;
+	};
+
+	pinctrl_pcieb: pciebgrp {
+		fsl,pins = <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00		0x06000041>,
+			   <IMX8QXP_PCIE_CTRL0_CLKREQ_B_HSIO_PCIE0_CLKREQ_B	0x06000041>,
+			   <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02		0x04000041>;
+	};
+
+	pinctrl_reg_pcie_1v5: regpcie1v5grp {
+		fsl,pins = <IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30	0x00000021>;
+	};
+
+	pinctrl_reg_pcie_3v3: regpcie3v3grp {
+		fsl,pins = <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31	0x00000021>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <IMX8QXP_MCLK_OUT0_ADMA_ACM_MCLK_OUT0	0x06000041>,
+			   <IMX8QXP_FLEXCAN0_RX_ADMA_SAI1_TXC		0x06000041>,
+			   <IMX8QXP_FLEXCAN0_TX_ADMA_SAI1_TXFS		0x06000041>,
+			   <IMX8QXP_FLEXCAN1_RX_ADMA_SAI1_TXD		0x06000041>,
+			   <IMX8QXP_FLEXCAN1_TX_ADMA_SAI1_RXD		0x06000041>;
+	};
+
+	pinctrl_spi1: spi1grp {
+		fsl,pins = <IMX8QXP_SAI0_TXC_ADMA_SPI1_SDI	0x00000041>,
+			   <IMX8QXP_SAI0_TXD_ADMA_SPI1_SDO	0x00000041>,
+			   <IMX8QXP_SAI0_TXFS_ADMA_SPI1_SCK	0x00000041>,
+			   <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27	0x00000021>,
+			   <IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29	0x00000021>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK	0x00000041>,
+			   <IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI	0x00000041>,
+			   <IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO	0x00000041>,
+			   <IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00	0x00000021>;
+	};
+
+	pinctrl_spi3: spi3grp {
+		fsl,pins = <IMX8QXP_SPI3_SCK_ADMA_SPI3_SCK	0x00000041>,
+			   <IMX8QXP_SPI3_SDI_ADMA_SPI3_SDI	0x00000041>,
+			   <IMX8QXP_SPI3_SDO_ADMA_SPI3_SDO	0x00000041>,
+			   <IMX8QXP_SPI3_CS0_LSIO_GPIO0_IO16	0x00000021>,
+			   <IMX8QXP_SPI3_CS1_ADMA_SPI3_CS1	0x00000021>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <IMX8QXP_USB_SS3_TC0_CONN_USB_OTG1_PWR	0x00000021>,
+			   <IMX8QXP_USB_SS3_TC2_CONN_USB_OTG1_OC	0x00000021>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21		0x00000021>,
+			   <IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22		0x00000021>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
index dbd2fc3ba790..1b2b20c6126d 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
@@ -27,12 +27,13 @@ fman@1a00000 {
 		reg = <0xf0000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
 		pcsphy-handle = <&pcsphy6>;
+		pcs-handle = <&pcsphy6>;
 	};
 
 	mdio@f1000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xf1000 0x1000>;
 
 		pcsphy6: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
index 6fc5d2560057..55d78f6f7c6c 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
@@ -27,12 +27,13 @@ fman@1a00000 {
 		reg = <0xf2000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
 		pcsphy-handle = <&pcsphy7>;
+		pcs-handle = <&pcsphy7>;
 	};
 
 	mdio@f3000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xf3000 0x1000>;
 
 		pcsphy7: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
index 4e02276fcf99..18916a860c2e 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
@@ -26,12 +26,13 @@ fman@1a00000 {
 		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
 		ptp-timer = <&ptp_timer0>;
 		pcsphy-handle = <&pcsphy0>;
+		pcs-handle = <&pcsphy0>;
 	};
 
 	mdio@e1000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe1000 0x1000>;
 
 		pcsphy0: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
index 0312fa43fa77..e90af445a293 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
@@ -26,12 +26,13 @@ fman@1a00000 {
 		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
 		ptp-timer = <&ptp_timer0>;
 		pcsphy-handle = <&pcsphy1>;
+		pcs-handle = <&pcsphy1>;
 	};
 
 	mdio@e3000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe3000 0x1000>;
 
 		pcsphy1: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
index af2df07971dd..fec93905bc81 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
@@ -26,12 +26,13 @@ fman@1a00000 {
 		fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
 		ptp-timer = <&ptp_timer0>;
 		pcsphy-handle = <&pcsphy2>;
+		pcs-handle = <&pcsphy2>;
 	};
 
 	mdio@e5000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe5000 0x1000>;
 
 		pcsphy2: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
index 4ac98dc8b227..2aa953faa62b 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
@@ -26,12 +26,13 @@ fman@1a00000 {
 		fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
 		ptp-timer = <&ptp_timer0>;
 		pcsphy-handle = <&pcsphy3>;
+		pcs-handle = <&pcsphy3>;
 	};
 
 	mdio@e7000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe7000 0x1000>;
 
 		pcsphy3: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
index bd932d8b0160..948e39411415 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
@@ -26,12 +26,13 @@ fman@1a00000 {
 		fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
 		ptp-timer = <&ptp_timer0>;
 		pcsphy-handle = <&pcsphy4>;
+		pcs-handle = <&pcsphy4>;
 	};
 
 	mdio@e9000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe9000 0x1000>;
 
 		pcsphy4: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
index 7de1c5203f3e..01b78c0463a7 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
@@ -31,7 +31,7 @@ fman@1a00000 {
 	mdio@eb000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xeb000 0x1000>;
 
 		pcsphy5: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
index ae1c2abaaf36..b0390b711fef 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -67,14 +67,14 @@ fman0: fman@1a00000 {
 	mdio0: mdio@fc000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xfc000 0x1000>;
 	};
 
 	xmdio0: mdio@fd000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xfd000 0x1000>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
index 824d401e7a2c..d167624d1f0c 100644
--- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -3,7 +3,7 @@
  * NXP S32G2 SoC family
  *
  * Copyright (c) 2021 SUSE LLC
- * Copyright (c) 2017-2021 NXP
+ * Copyright 2017-2021, 2024 NXP
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -14,6 +14,18 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	reserved-memory  {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scmi_buf: shm@d0000000 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0xd0000000 0x0 0x80>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -52,10 +64,14 @@
 
 		cluster0_l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster1_l2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -73,6 +89,19 @@
 	};
 
 	firmware {
+		scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0xc20000fe>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			shmem = <&scmi_buf>;
+
+			clks: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+
 		psci {
 			compatible = "arm,psci-1.0";
 			method = "smc";
@@ -85,6 +114,335 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0x80000000>;
 
+		rtc0: rtc@40060000 {
+			compatible = "nxp,s32g2-rtc";
+			reg = <0x40060000 0x1000>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 54>, <&clks 55>;
+			clock-names = "ipg", "source0";
+		};
+
+		pinctrl: pinctrl@4009c240 {
+			compatible = "nxp,s32g2-siul2-pinctrl";
+				/* MSCR0-MSCR101 registers on siul2_0 */
+			reg = <0x4009c240 0x198>,
+				/* MSCR112-MSCR122 registers on siul2_1 */
+			      <0x44010400 0x2c>,
+				/* MSCR144-MSCR190 registers on siul2_1 */
+			      <0x44010480 0xbc>,
+				/* IMCR0-IMCR83 registers on siul2_0 */
+			      <0x4009ca40 0x150>,
+				/* IMCR119-IMCR397 registers on siul2_1 */
+			      <0x44010c1c 0x45c>,
+				/* IMCR430-IMCR495 registers on siul2_1 */
+			      <0x440110f8 0x108>;
+
+			jtag_pins: jtag-pins {
+				jtag-grp0 {
+					pinmux = <0x0>;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <166>;
+				};
+
+				jtag-grp1 {
+					pinmux = <0x11>;
+					slew-rate = <166>;
+				};
+
+				jtag-grp2 {
+					pinmux = <0x40>;
+					input-enable;
+					bias-pull-down;
+					slew-rate = <166>;
+				};
+
+				jtag-grp3 {
+					pinmux = <0x23c0>,
+						 <0x23d0>,
+						 <0x2320>;
+				};
+
+				jtag-grp4 {
+					pinmux = <0x51>;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <166>;
+				};
+			};
+
+			pinctrl_usdhc0: usdhc0grp-pins {
+				usdhc0-grp0 {
+					pinmux = <0x2e1>,
+						 <0x381>;
+					output-enable;
+					bias-pull-down;
+					slew-rate = <150>;
+				};
+
+				usdhc0-grp1 {
+					pinmux = <0x2f1>,
+						 <0x301>,
+						 <0x311>,
+						 <0x321>,
+						 <0x331>,
+						 <0x341>,
+						 <0x351>,
+						 <0x361>,
+						 <0x371>;
+					output-enable;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <150>;
+				};
+
+				usdhc0-grp2 {
+					pinmux = <0x391>;
+					output-enable;
+					slew-rate = <150>;
+				};
+
+				usdhc0-grp3 {
+					pinmux = <0x3a0>;
+					input-enable;
+					slew-rate = <150>;
+				};
+
+				usdhc0-grp4 {
+					pinmux = <0x2032>,
+						 <0x2042>,
+						 <0x2052>,
+						 <0x2062>,
+						 <0x2072>,
+						 <0x2082>,
+						 <0x2092>,
+						 <0x20a2>,
+						 <0x20b2>,
+						 <0x20c2>;
+				};
+			};
+
+			pinctrl_usdhc0_100mhz: usdhc0-100mhzgrp-pins {
+				usdhc0-100mhz-grp0 {
+					pinmux = <0x2e1>,
+						 <0x381>;
+					output-enable;
+					bias-pull-down;
+					slew-rate = <150>;
+				};
+
+				usdhc0-100mhz-grp1 {
+					pinmux = <0x2f1>,
+						 <0x301>,
+						 <0x311>,
+						 <0x321>,
+						 <0x331>,
+						 <0x341>,
+						 <0x351>,
+						 <0x361>,
+						 <0x371>;
+					output-enable;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <150>;
+				};
+
+				usdhc0-100mhz-grp2 {
+					pinmux = <0x391>;
+					output-enable;
+					slew-rate = <150>;
+				};
+
+				usdhc0-100mhz-grp3 {
+					pinmux = <0x3a0>;
+					input-enable;
+					slew-rate = <150>;
+				};
+
+				usdhc0-100mhz-grp4 {
+					pinmux = <0x2032>,
+						 <0x2042>,
+						 <0x2052>,
+						 <0x2062>,
+						 <0x2072>,
+						 <0x2082>,
+						 <0x2092>,
+						 <0x20a2>,
+						 <0x20b2>,
+						 <0x20c2>;
+				};
+			};
+
+			pinctrl_usdhc0_200mhz: usdhc0-200mhzgrp-pins {
+				usdhc0-200mhz-grp0 {
+					pinmux = <0x2e1>,
+						 <0x381>;
+					output-enable;
+					bias-pull-down;
+					slew-rate = <208>;
+				};
+
+				usdhc0-200mhz-grp1 {
+					pinmux = <0x2f1>,
+						 <0x301>,
+						 <0x311>,
+						 <0x321>,
+						 <0x331>,
+						 <0x341>,
+						 <0x351>,
+						 <0x361>,
+						 <0x371>;
+					output-enable;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <208>;
+				};
+
+				usdhc0-200mhz-grp2 {
+					pinmux = <0x391>;
+					output-enable;
+					slew-rate = <208>;
+				};
+
+				usdhc0-200mhz-grp3 {
+					pinmux = <0x3a0>;
+					input-enable;
+					slew-rate = <208>;
+				};
+
+				usdhc0-200mhz-grp4 {
+					pinmux = <0x2032>,
+						 <0x2042>,
+						 <0x2052>,
+						 <0x2062>,
+						 <0x2072>,
+						 <0x2082>,
+						 <0x2092>,
+						 <0x20a2>,
+						 <0x20b2>,
+						 <0x20c2>;
+				};
+			};
+		};
+
+		ocotp: nvmem@400a4000 {
+			compatible = "nxp,s32g2-ocotp";
+			reg = <0x400a4000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		swt0: watchdog@40100000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40100000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt1: watchdog@40104000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40104000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt2: watchdog@40108000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40108000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt3: watchdog@4010c000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x4010c000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm0: timer@4011c000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x4011c000 0x3000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm1: timer@40120000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40120000 0x3000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm2: timer@40124000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40124000 0x3000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm3: timer@40128000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40128000 0x3000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		edma0: dma-controller@40144000 {
+			compatible = "nxp,s32g2-edma";
+			reg = <0x40144000 0x24000>,
+			      <0x4012c000 0x3000>,
+			      <0x40130000 0x3000>;
+			#dma-cells = <2>;
+			dma-channels = <32>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx-0-15",
+					  "tx-16-31",
+					  "err";
+			clocks = <&clks 63>, <&clks 64>;
+			clock-names = "dmamux0", "dmamux1";
+		};
+
+		can0: can@401b4000 {
+			compatible = "nxp,s32g2-flexcan";
+			reg = <0x401b4000 0xa000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		can1: can@401be000 {
+			compatible = "nxp,s32g2-flexcan";
+			reg = <0x401be000 0xa000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
 		uart0: serial@401c8000 {
 			compatible = "nxp,s32g2-linflexuart",
 				     "fsl,s32v234-linflexuart";
@@ -101,6 +459,195 @@
 			status = "disabled";
 		};
 
+		usbmisc: usbmisc@44064200 {
+			#index-cells = <1>;
+			compatible = "nxp,s32g2-usbmisc";
+			reg = <0x44064200 0x200>;
+		};
+
+		usbotg: usb@44064000 {
+			compatible = "nxp,s32g2-usb";
+			reg = <0x44064000 0x200>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, /* OTG Core */
+					 <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; /* OTG Wakeup */
+			clocks = <&clks 94>, <&clks 95>;
+			fsl,usbmisc = <&usbmisc 0>;
+			ahb-burst-config = <0x3>;
+			tx-burst-size-dword = <0x10>;
+			rx-burst-size-dword = <0x10>;
+			phy_type = "ulpi";
+			dr_mode = "host";
+			maximum-speed = "high-speed";
+			status = "disabled";
+		};
+
+		spi0: spi@401d4000 {
+			compatible = "nxp,s32g2-dspi";
+			reg = <0x401d4000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <8>;
+			bus-num = <0>;
+			dmas = <&edma0 0 7>, <&edma0 0 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi1: spi@401d8000 {
+			compatible = "nxp,s32g2-dspi";
+			reg = <0x401d8000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <1>;
+			dmas = <&edma0 0 10>, <&edma0 0 11>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi2: spi@401dc000 {
+			compatible = "nxp,s32g2-dspi";
+			reg = <0x401dc000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <2>;
+			dmas = <&edma0 0 13>, <&edma0 0 14>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@401e4000 {
+			compatible = "nxp,s32g2-i2c";
+			reg = <0x401e4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		i2c1: i2c@401e8000 {
+			compatible = "nxp,s32g2-i2c";
+			reg = <0x401e8000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		i2c2: i2c@401ec000 {
+			compatible = "nxp,s32g2-i2c";
+			reg = <0x401ec000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		swt4: watchdog@40200000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40200000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt5: watchdog@40204000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40204000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt6: watchdog@40208000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40208000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm4: timer@4021c000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x4021c000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm5: timer@40220000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40220000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm6: timer@40224000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40224000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		edma1: dma-controller@40244000 {
+			compatible = "nxp,s32g2-edma";
+			reg = <0x40244000 0x24000>,
+			      <0x4022c000 0x3000>,
+			      <0x40230000 0x3000>;
+			#dma-cells = <2>;
+			dma-channels = <32>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx-0-15",
+					  "tx-16-31",
+					  "err";
+			clocks = <&clks 63>, <&clks 64>;
+			clock-names = "dmamux0", "dmamux1";
+		};
+
+		can2: can@402a8000 {
+			compatible = "nxp,s32g2-flexcan";
+			reg = <0x402a8000 0xa000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		can3: can@402b2000 {
+			compatible = "nxp,s32g2-flexcan";
+			reg = <0x402b2000 0xa000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
 		uart2: serial@402bc000 {
 			compatible = "nxp,s32g2-linflexuart",
 				     "fsl,s32v234-linflexuart";
@@ -109,6 +656,77 @@
 			status = "disabled";
 		};
 
+		spi3: spi@402c8000 {
+			compatible = "nxp,s32g2-dspi";
+			reg = <0x402c8000 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <3>;
+			dmas = <&edma0 1 7>, <&edma0 1 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi4: spi@402cc000 {
+			compatible = "nxp,s32g2-dspi";
+			reg = <0x402cc000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <4>;
+			dmas = <&edma0 1 10>, <&edma0 1 11>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi5: spi@402d0000 {
+			compatible = "nxp,s32g2-dspi";
+			reg = <0x402d0000 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <5>;
+			dmas = <&edma0 1 13>, <&edma0 1 14>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c3: i2c@402d8000 {
+			compatible = "nxp,s32g2-i2c";
+			reg = <0x402d8000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		i2c4: i2c@402dc000 {
+			compatible = "nxp,s32g2-i2c";
+			reg = <0x402dc000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		usdhc0: mmc@402f0000 {
+			compatible = "nxp,s32g2-usdhc";
+			reg = <0x402f0000 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 32>, <&clks 31>, <&clks 33>;
+			clock-names = "ipg", "ahb", "per";
+			bus-width = <8>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@50800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x50800000 0x10000>,
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
index 9118d8d2ee01..c4a195dd67bf 100644
--- a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
+++ b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
@@ -1,12 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (c) 2021 SUSE LLC
- * Copyright (c) 2019-2021 NXP
+ * Copyright 2019-2021, 2024 NXP
  */
 
 /dts-v1/;
 
 #include "s32g2.dtsi"
+#include "s32gxxxa-evb.dtsi"
 
 / {
 	model = "NXP S32G2 Evaluation Board (S32G-VNP-EVB)";
@@ -32,3 +33,13 @@
 &uart0 {
 	status = "okay";
 };
+
+&usdhc0 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc0_200mhz>;
+	disable-wp;
+	no-1-8-v;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
index e05ee854cdf5..4f58be68c818 100644
--- a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
+++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
@@ -1,12 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (c) 2021 SUSE LLC
- * Copyright (c) 2019-2021 NXP
+ * Copyright 2019-2021, 2024 NXP
  */
 
 /dts-v1/;
 
 #include "s32g2.dtsi"
+#include "s32gxxxa-rdb.dtsi"
 
 / {
 	model = "NXP S32G2 Reference Design Board 2 (S32G-VNP-RDB2)";
@@ -38,3 +39,41 @@
 &uart1 {
 	status = "okay";
 };
+
+&stm0 {
+	status = "okay";
+};
+
+&stm1 {
+	status = "okay";
+};
+
+&stm2 {
+	status = "okay";
+};
+
+&stm3 {
+	status = "okay";
+};
+
+&swt0 {
+	status = "okay";
+};
+
+&usdhc0 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc0_200mhz>;
+	disable-wp;
+	/* Remove no-1-8-v to enable higher speed modes for SD card.
+	 * However, this is not enough to enable HS400 or HS200 modes for eMMC.
+	 * In this case, the position of the resistor R797 must be changed
+	 * from A to B before removing the property.
+	 * If the property is removed without changing the resistor position,
+	 * HS*00 may be enabled, but the interface might be unstable because of
+	 * the wrong VCCQ voltage applied to the eMMC.
+	 */
+	no-1-8-v;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
new file mode 100644
index 000000000000..be3a582ebc1b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
@@ -0,0 +1,898 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright 2021-2024 NXP
+ *
+ * Authors: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
+ *          Ciprian Costea <ciprianmarian.costea@nxp.com>
+ *          Andra-Teodora Ilie <andra.ilie@nxp.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "nxp,s32g3";
+	interrupt-parent = <&gic>;
+	#address-cells = <0x02>;
+	#size-cells = <0x02>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+			clocks = <&dfs 0>;
+		};
+	};
+
+	firmware {
+		scmi: scmi {
+			compatible = "arm,scmi-smc";
+			shmem = <&scmi_shmem>;
+			arm,smc-id = <0xc20000fe>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dfs: protocol@13 {
+				reg = <0x13>;
+				#clock-cells = <1>;
+			};
+
+			clks: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	reserved-memory  {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scmi_shmem: shm@d0000000 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0xd0000000 0x0 0x80>;
+			no-map;
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x80000000>;
+
+		rtc0: rtc@40060000 {
+			compatible = "nxp,s32g3-rtc",
+				     "nxp,s32g2-rtc";
+			reg = <0x40060000 0x1000>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 54>, <&clks 55>;
+			clock-names = "ipg", "source0";
+		};
+
+		pinctrl: pinctrl@4009c240 {
+			compatible = "nxp,s32g2-siul2-pinctrl";
+				/* MSCR0-MSCR101 registers on siul2_0 */
+			reg = <0x4009c240 0x198>,
+				/* MSCR112-MSCR122 registers on siul2_1 */
+			      <0x44010400 0x2c>,
+				/* MSCR144-MSCR190 registers on siul2_1 */
+			      <0x44010480 0xbc>,
+				/* IMCR0-IMCR83 registers on siul2_0 */
+			      <0x4009ca40 0x150>,
+				/* IMCR119-IMCR397 registers on siul2_1 */
+			      <0x44010c1c 0x45c>,
+				/* IMCR430-IMCR495 registers on siul2_1 */
+			      <0x440110f8 0x108>;
+
+			jtag_pins: jtag-pins {
+				jtag-grp0 {
+					pinmux = <0x0>;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <166>;
+				};
+
+				jtag-grp1 {
+					pinmux = <0x11>;
+					slew-rate = <166>;
+				};
+
+				jtag-grp2 {
+					pinmux = <0x40>;
+					input-enable;
+					bias-pull-down;
+					slew-rate = <166>;
+				};
+
+				jtag-grp3 {
+					pinmux = <0x23c0>,
+						 <0x23d0>,
+						 <0x2320>;
+				};
+
+				jtag-grp4 {
+					pinmux = <0x51>;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <166>;
+				};
+			};
+
+			pinctrl_usdhc0: usdhc0grp-pins {
+				usdhc0-grp0 {
+					pinmux = <0x2e1>,
+						 <0x381>;
+					output-enable;
+					bias-pull-down;
+					slew-rate = <150>;
+				};
+
+				usdhc0-grp1 {
+					pinmux = <0x2f1>,
+						 <0x301>,
+						 <0x311>,
+						 <0x321>,
+						 <0x331>,
+						 <0x341>,
+						 <0x351>,
+						 <0x361>,
+						 <0x371>;
+					output-enable;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <150>;
+				};
+
+				usdhc0-grp2 {
+					pinmux = <0x391>;
+					output-enable;
+					slew-rate = <150>;
+				};
+
+				usdhc0-grp3 {
+					pinmux = <0x3a0>;
+					input-enable;
+					slew-rate = <150>;
+				};
+
+				usdhc0-grp4 {
+					pinmux = <0x2032>,
+						 <0x2042>,
+						 <0x2052>,
+						 <0x2062>,
+						 <0x2072>,
+						 <0x2082>,
+						 <0x2092>,
+						 <0x20a2>,
+						 <0x20b2>,
+						 <0x20c2>;
+				};
+			};
+
+			pinctrl_usdhc0_100mhz: usdhc0-100mhzgrp-pins {
+				usdhc0-100mhz-grp0 {
+					pinmux = <0x2e1>,
+						 <0x381>;
+					output-enable;
+					bias-pull-down;
+					slew-rate = <150>;
+				};
+
+				usdhc0-100mhz-grp1 {
+					pinmux = <0x2f1>,
+						 <0x301>,
+						 <0x311>,
+						 <0x321>,
+						 <0x331>,
+						 <0x341>,
+						 <0x351>,
+						 <0x361>,
+						 <0x371>;
+					output-enable;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <150>;
+				};
+
+				usdhc0-100mhz-grp2 {
+					pinmux = <0x391>;
+					output-enable;
+					slew-rate = <150>;
+				};
+
+				usdhc0-100mhz-grp3 {
+					pinmux = <0x3a0>;
+					input-enable;
+					slew-rate = <150>;
+				};
+
+				usdhc0-100mhz-grp4 {
+					pinmux = <0x2032>,
+						 <0x2042>,
+						 <0x2052>,
+						 <0x2062>,
+						 <0x2072>,
+						 <0x2082>,
+						 <0x2092>,
+						 <0x20a2>,
+						 <0x20b2>,
+						 <0x20c2>;
+				};
+			};
+
+			pinctrl_usdhc0_200mhz: usdhc0-200mhzgrp-pins {
+				usdhc0-200mhz-grp0 {
+					pinmux = <0x2e1>,
+						 <0x381>;
+					output-enable;
+					bias-pull-down;
+					slew-rate = <208>;
+				};
+
+				usdhc0-200mhz-grp1 {
+					pinmux = <0x2f1>,
+						 <0x301>,
+						 <0x311>,
+						 <0x321>,
+						 <0x331>,
+						 <0x341>,
+						 <0x351>,
+						 <0x361>,
+						 <0x371>;
+					output-enable;
+					input-enable;
+					bias-pull-up;
+					slew-rate = <208>;
+				};
+
+				usdhc0-200mhz-grp2 {
+					pinmux = <0x391>;
+					output-enable;
+					slew-rate = <208>;
+				};
+
+				usdhc0-200mhz-grp3 {
+					pinmux = <0x3a0>;
+					input-enable;
+					slew-rate = <208>;
+				};
+
+				usdhc0-200mhz-grp4 {
+					pinmux = <0x2032>,
+						 <0x2042>,
+						 <0x2052>,
+						 <0x2062>,
+						 <0x2072>,
+						 <0x2082>,
+						 <0x2092>,
+						 <0x20a2>,
+						 <0x20b2>,
+						 <0x20c2>;
+				};
+			};
+		};
+
+		ocotp: nvmem@400a4000 {
+			compatible = "nxp,s32g3-ocotp", "nxp,s32g2-ocotp";
+			reg = <0x400a4000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		swt0: watchdog@40100000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40100000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt1: watchdog@40104000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40104000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt2: watchdog@40108000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40108000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt3: watchdog@4010c000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x4010c000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm0: timer@4011c000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x4011c000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm1: timer@40120000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40120000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm2: timer@40124000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40124000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm3: timer@40128000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40128000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		edma0: dma-controller@40144000 {
+			compatible = "nxp,s32g3-edma", "nxp,s32g2-edma";
+			reg = <0x40144000 0x24000>,
+			      <0x4012c000 0x3000>,
+			      <0x40130000 0x3000>;
+			#dma-cells = <2>;
+			dma-channels = <32>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx-0-15",
+					  "tx-16-31",
+					  "err";
+			clocks = <&clks 63>, <&clks 64>;
+			clock-names = "dmamux0", "dmamux1";
+		};
+
+		can0: can@401b4000 {
+			compatible = "nxp,s32g3-flexcan",
+					   "nxp,s32g2-flexcan";
+			reg = <0x401b4000 0xa000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		can1: can@401be000 {
+			compatible = "nxp,s32g3-flexcan",
+					   "nxp,s32g2-flexcan";
+			reg = <0x401be000 0xa000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		uart0: serial@401c8000 {
+			compatible = "nxp,s32g3-linflexuart",
+				     "fsl,s32v234-linflexuart";
+			reg = <0x401c8000 0x3000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		uart1: serial@401cc000 {
+			compatible = "nxp,s32g3-linflexuart",
+				     "fsl,s32v234-linflexuart";
+			reg = <0x401cc000 0x3000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		usbmisc: usbmisc@44064200 {
+			#index-cells = <1>;
+			compatible = "nxp,s32g3-usbmisc";
+			reg = <0x44064200 0x200>;
+		};
+
+                usbotg: usb@44064000 {
+                        compatible = "nxp,s32g3-usb", "nxp,s32g2-usb";
+                        reg = <0x44064000 0x200>;
+                        interrupt-parent = <&gic>;
+                        interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, /* OTG Core */
+                                     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; /* OTG Wakeup */
+                        clocks = <&clks 94>, <&clks 95>;
+                        fsl,usbmisc = <&usbmisc 0>;
+                        ahb-burst-config = <0x3>;
+                        tx-burst-size-dword = <0x10>;
+                        rx-burst-size-dword = <0x10>;
+                        phy_type = "ulpi";
+                        dr_mode = "host";
+                        maximum-speed = "high-speed";
+                        status = "disabled";
+                };
+
+		spi0: spi@401d4000 {
+			compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+			reg = <0x401d4000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <8>;
+			bus-num = <0>;
+			dmas = <&edma0 0 7>, <&edma0 0 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi1: spi@401d8000 {
+			compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+			reg = <0x401d8000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <1>;
+			dmas = <&edma0 0 10>, <&edma0 0 11>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi2: spi@401dc000 {
+			compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+			reg = <0x401dc000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <2>;
+			dmas = <&edma0 0 13>, <&edma0 0 14>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@401e4000 {
+			compatible = "nxp,s32g3-i2c",
+				     "nxp,s32g2-i2c";
+			reg = <0x401e4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		i2c1: i2c@401e8000 {
+			compatible = "nxp,s32g3-i2c",
+				     "nxp,s32g2-i2c";
+			reg = <0x401e8000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		i2c2: i2c@401ec000 {
+			compatible = "nxp,s32g3-i2c",
+				     "nxp,s32g2-i2c";
+			reg = <0x401ec000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		swt4: watchdog@40200000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40200000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt5: watchdog@40204000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40204000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt6: watchdog@40208000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40208000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt7: watchdog@4020C000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x4020C000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm4: timer@4021c000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x4021c000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm5: timer@40220000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40220000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm6: timer@40224000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40224000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		edma1: dma-controller@40244000 {
+			compatible = "nxp,s32g3-edma", "nxp,s32g2-edma";
+			reg = <0x40244000 0x24000>,
+			      <0x4022c000 0x3000>,
+			      <0x40230000 0x3000>;
+			#dma-cells = <2>;
+			dma-channels = <32>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx-0-15",
+					  "tx-16-31",
+					  "err";
+			clocks = <&clks 63>, <&clks 64>;
+			clock-names = "dmamux0", "dmamux1";
+		};
+
+		can2: can@402a8000 {
+			compatible = "nxp,s32g3-flexcan",
+					   "nxp,s32g2-flexcan";
+			reg = <0x402a8000 0xa000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		can3: can@402b2000 {
+			compatible = "nxp,s32g3-flexcan",
+					   "nxp,s32g2-flexcan";
+			reg = <0x402b2000 0xa000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		uart2: serial@402bc000 {
+			compatible = "nxp,s32g3-linflexuart",
+				     "fsl,s32v234-linflexuart";
+			reg = <0x402bc000 0x3000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		spi3: spi@402c8000 {
+			compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+			reg = <0x402c8000 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <3>;
+			dmas = <&edma0 1 7>, <&edma0 1 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi4: spi@402cc000 {
+			compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+			reg = <0x402cc000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <4>;
+			dmas = <&edma0 1 10>, <&edma0 1 11>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi5: spi@402d0000 {
+			compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+			reg = <0x402d0000 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <5>;
+			dmas = <&edma0 1 13>, <&edma0 1 14>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c3: i2c@402d8000 {
+			compatible = "nxp,s32g3-i2c",
+				     "nxp,s32g2-i2c";
+			reg = <0x402d8000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		i2c4: i2c@402dc000 {
+			compatible = "nxp,s32g3-i2c",
+				     "nxp,s32g2-i2c";
+			reg = <0x402dc000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		usdhc0: mmc@402f0000 {
+			compatible = "nxp,s32g3-usdhc",
+				     "nxp,s32g2-usdhc";
+			reg = <0x402f0000 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 32>,
+				 <&clks 31>,
+				 <&clks 33>;
+			clock-names = "ipg", "ahb", "per";
+			status = "disabled";
+		};
+
+		swt8: watchdog@40500000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <40500000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt9: watchdog@40504000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40504000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt10: watchdog@40508000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40508000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt11: watchdog@4050c000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x4050c000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm8: timer@40520000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40520000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm9: timer@40524000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40524000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm10: timer@40528000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40528000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm11: timer@4052c000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x4052c000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@50800000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x50800000 0x10000>,
+			      <0x50900000 0x200000>,
+			      <0x50400000 0x2000>,
+			      <0x50410000 0x2000>,
+			      <0x50420000 0x2000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* sec-phys */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* phys */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* virt */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, /* hyp-phys */
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; /* hyp-virt */
+		arm,no-tick-in-suspend;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
new file mode 100644
index 000000000000..e94f70ad82d9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright 2021-2024 NXP
+ *
+ * NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3)
+ */
+
+/dts-v1/;
+
+#include "s32g3.dtsi"
+#include "s32gxxxa-rdb.dtsi"
+
+/ {
+	model = "NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3)";
+	compatible = "nxp,s32g399a-rdb3", "nxp,s32g3";
+
+	aliases {
+		mmc0 = &usdhc0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* 4GiB RAM */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>,
+		      <0x8 0x80000000 0 0x80000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&stm0 {
+	status = "okay";
+};
+
+&stm1 {
+	status = "okay";
+};
+
+&stm2 {
+	status = "okay";
+};
+
+&stm3 {
+	status = "okay";
+};
+
+&stm4 {
+	status = "okay";
+};
+
+&stm5 {
+	status = "okay";
+};
+
+&stm6 {
+	status = "okay";
+};
+
+&stm8 {
+	status = "okay";
+};
+
+&swt0 {
+	status = "okay";
+};
+
+&i2c4 {
+	current-sensor@40 {
+		compatible = "ti,ina231";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+};
+
+&usdhc0 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc0_200mhz>;
+	bus-width = <8>;
+	disable-wp;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi b/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi
new file mode 100644
index 000000000000..f1969cdcef19
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright 2024 NXP
+ *
+ * Authors: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
+ *          Ghennadi Procopciuc <ghennadi.procopciuc@oss.nxp.com>
+ *          Larisa Grigore <larisa.grigore@nxp.com>
+ */
+
+&pinctrl {
+	can0_pins: can0-pins {
+		can0-grp0 {
+			pinmux = <0x2c1>;
+			output-enable;
+			slew-rate = <133>;
+		};
+
+		can0-grp1 {
+			pinmux = <0x2b0>;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		can0-grp2 {
+			pinmux = <0x2012>;
+		};
+	};
+
+	can2_pins: can2-pins {
+		can2-grp0 {
+			pinmux = <0x1b2>;
+			output-enable;
+			slew-rate = <133>;
+		};
+
+		can2-grp1 {
+			pinmux = <0x1c0>;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		can2-grp2 {
+			pinmux = <0x2782>;
+		};
+	};
+
+	can3_pins: can3-pins {
+		can3-grp0 {
+			pinmux = <0x192>;
+			output-enable;
+			slew-rate = <133>;
+		};
+
+		can3-grp1 {
+			pinmux = <0x1a0>;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		can3-grp2 {
+			pinmux = <0x2792>;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		i2c0-grp0 {
+			pinmux = <0x101>, <0x111>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c0-grp1 {
+			pinmux = <0x2352>, <0x2362>;
+		};
+	};
+
+	i2c0_gpio_pins: i2c0-gpio-pins {
+		i2c0-gpio-grp0 {
+			pinmux = <0x100>, <0x110>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c0-gpio-grp1 {
+			pinmux = <0x2350>, <0x2360>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		i2c1-grp0 {
+			pinmux = <0x131>, <0x141>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c1-grp1 {
+			pinmux = <0x2cd2>, <0x2ce2>;
+		};
+	};
+
+	i2c1_gpio_pins: i2c1-gpio-pins {
+		i2c1-gpio-grp0 {
+			pinmux = <0x130>, <0x140>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c1-gpio-grp1 {
+			pinmux = <0x2cd0>, <0x2ce0>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		i2c2-grp0 {
+			pinmux = <0x151>, <0x161>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c2-grp1 {
+			pinmux = <0x2cf2>, <0x2d02>;
+		};
+	};
+
+	i2c2_gpio_pins: i2c2-gpio-pins {
+		i2c2-gpio-grp0 {
+			pinmux = <0x150>, <0x160>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c2-gpio-grp1 {
+			pinmux = <0x2cf0>, <0x2d00>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		i2c4-grp0 {
+			pinmux = <0x211>, <0x222>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c4-grp1 {
+			pinmux = <0x2d43>, <0x2d33>;
+		};
+	};
+
+	i2c4_gpio_pins: i2c4-gpio-pins {
+		i2c4-gpio-grp0 {
+			pinmux = <0x210>, <0x220>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c4-gpio-grp1 {
+			pinmux = <0x2d40>, <0x2d30>;
+		};
+	};
+
+	dspi1_pins: dspi1-pins {
+		dspi1-grp0 {
+			pinmux = <0x72>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+
+		dspi1-grp1 {
+			pinmux = <0x62>;
+			output-enable;
+			slew-rate = <150>;
+		};
+
+		dspi1-grp2 {
+			pinmux = <0x83>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+		};
+
+		dspi1-grp3 {
+			pinmux = <0x5F0>;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+
+		dspi1-grp4 {
+			pinmux = <0x3D92>,
+				 <0x3DA2>,
+				 <0x3DB2>;
+		};
+	};
+
+	dspi5_pins: dspi5-pins {
+		dspi5-grp0 {
+			pinmux = <0x93>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+		};
+
+		dspi5-grp1 {
+			pinmux = <0xA0>;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+
+		dspi5-grp2 {
+			pinmux = <0x3ED2>,
+				 <0x3EE2>,
+				 <0x3EF2>;
+		};
+
+		dspi5-grp3 {
+			pinmux = <0xB3>;
+			output-enable;
+			slew-rate = <150>;
+		};
+
+		dspi5-grp4 {
+			pinmux = <0xC3>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+	};
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can2_pins>;
+	status = "okay";
+};
+
+&can3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can3_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-1 = <&i2c0_gpio_pins>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-1 = <&i2c1_gpio_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-1 = <&i2c2_gpio_pins>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-1 = <&i2c4_gpio_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-0 = <&dspi1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spi5 {
+	pinctrl-0 = <&dspi5_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi b/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi
new file mode 100644
index 000000000000..3bc3335c9248
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright 2024 NXP
+ *
+ * Authors: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
+ *          Ghennadi Procopciuc <ghennadi.procopciuc@oss.nxp.com>
+ *          Larisa Grigore <larisa.grigore@nxp.com>
+ */
+
+&pinctrl {
+	can0_pins: can0-pins {
+		can0-grp0 {
+			pinmux = <0x112>;
+			output-enable;
+			slew-rate = <133>;
+		};
+
+		can0-grp1 {
+			pinmux = <0x120>;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		can0-grp2 {
+			pinmux = <0x2013>;
+		};
+	};
+
+	can1_pins: can1-pins {
+		can1-grp0 {
+			pinmux = <0x132>;
+			output-enable;
+			slew-rate = <133>;
+		};
+
+		can1-grp1 {
+			pinmux = <0x140>;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		can1-grp2 {
+			pinmux = <0x2772>;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		i2c0-grp0 {
+			pinmux = <0x1f2>, <0x201>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c0-grp1 {
+			pinmux = <0x2353>, <0x2363>;
+		};
+	};
+
+	i2c0_gpio_pins: i2c0-gpio-pins {
+		i2c0-gpio-grp0 {
+			pinmux = <0x1f0>, <0x200>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c0-gpio-grp1 {
+			pinmux = <0x2350>, <0x2360>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		i2c2-grp0 {
+			pinmux = <0x151>, <0x161>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c2-grp1 {
+			pinmux = <0x2cf2>, <0x2d02>;
+		};
+	};
+
+	i2c2_gpio_pins: i2c2-gpio-pins {
+		i2c2-gpio-grp0 {
+			pinmux = <0x2cf0>, <0x2d00>;
+		};
+
+		i2c2-gpio-grp1 {
+			pinmux = <0x150>, <0x160>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		i2c4-grp0 {
+			pinmux = <0x211>, <0x222>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c4-grp1 {
+			pinmux = <0x2d43>, <0x2d33>;
+		};
+	};
+
+	i2c4_gpio_pins: i2c4-gpio-pins {
+		i2c4-gpio-grp0 {
+			pinmux = <0x210>, <0x220>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c4-gpio-grp1 {
+			pinmux = <0x2d40>, <0x2d30>;
+		};
+	};
+
+	dspi1_pins: dspi1-pins {
+		dspi1-grp0 {
+			pinmux = <0x72>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+
+		dspi1-grp1 {
+			pinmux = <0x62>;
+			output-enable;
+			slew-rate = <150>;
+		};
+
+		dspi1-grp2 {
+			pinmux = <0x83>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+		};
+
+		dspi1-grp3 {
+			pinmux = <0x5F0>;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+
+		dspi1-grp4 {
+			pinmux = <0x3D92>,
+				 <0x3DA2>,
+				 <0x3DB2>;
+		};
+	};
+
+	dspi5_pins: dspi5-pins {
+		dspi5-grp0 {
+			pinmux = <0x93>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+		};
+
+		dspi5-grp1 {
+			pinmux = <0xA0>;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+
+		dspi5-grp2 {
+			pinmux = <0x3ED2>,
+				 <0x3EE2>,
+				 <0x3EF2>;
+		};
+
+		dspi5-grp3 {
+			pinmux = <0xB3>;
+			output-enable;
+			slew-rate = <150>;
+		};
+
+		dspi5-grp4 {
+			pinmux = <0xC3>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+	};
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-1 = <&i2c0_gpio_pins>;
+	status = "okay";
+
+	pcal6524: gpio-expander@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca85073a: rtc@51 {
+		compatible = "nxp,pca85073a";
+		reg = <0x51>;
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&dspi1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spi5 {
+	pinctrl-0 = <&dspi5_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-1 = <&i2c2_gpio_pins>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-1 = <&i2c4_gpio_pins>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/s32v234.dtsi b/arch/arm64/boot/dts/freescale/s32v234.dtsi
index ba0b5305d481..bf608ded5dda 100644
--- a/arch/arm64/boot/dts/freescale/s32v234.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32v234.dtsi
@@ -61,10 +61,14 @@
 
 		cluster0_l2_cache: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster1_l2_cache: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -85,7 +89,7 @@
 	};
 
 	gic: interrupt-controller@7d001000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		compatible = "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
diff --git a/arch/arm64/boot/dts/freescale/tqma8xx.dtsi b/arch/arm64/boot/dts/freescale/tqma8xx.dtsi
new file mode 100644
index 000000000000..58693b774d4c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqma8xx.dtsi
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * global autoconfigured region for contiguous allocations
+		 * must not exceed memory size and region
+		 */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x20000000>;
+			alloc-ranges = <0 0x96000000 0 0x30000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+/* TQMa8Xx only uses industrial grade, reduce trip points accordingly */
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <100000>;
+};
+/* end of temperature grade adjustments */
+
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <66000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		vcc-supply = <&reg_1v8>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1gpio>;
+	scl-gpios = <&lsio_gpio1 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&lsio_gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	se97: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+
+	at24c02: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	m24c64: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_3v3>;
+	};
+};
+
+&jpegdec {
+	status = "okay";
+};
+
+&jpegenc {
+	status = "okay";
+};
+
+
+&mu_m0 {
+	status = "okay";
+};
+
+&mu1_m0 {
+	status = "okay";
+};
+
+&thermal_zones {
+	pmic_thermal: pmic-thermal {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&pmic_alert0>;
+				cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vqmmc-supply = <&reg_1v8>;
+	vmmc-supply = <&reg_3v3>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&vpu {
+	compatible = "nxp,imx8qxp-vpu";
+	status = "okay";
+};
+
+&vpu_core0 {
+	memory-region = <&decoder_boot>, <&decoder_rpc>;
+	status = "okay";
+};
+
+&vpu_core1 {
+	memory-region = <&encoder_boot>, <&encoder_rpc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			IMX8QXP_QSPI0A_DATA0_LSIO_QSPI0A_DATA0	0x0600004d
+			IMX8QXP_QSPI0A_DATA1_LSIO_QSPI0A_DATA1	0x0600004d
+			IMX8QXP_QSPI0A_DATA2_LSIO_QSPI0A_DATA2	0x0600004d
+			IMX8QXP_QSPI0A_DATA3_LSIO_QSPI0A_DATA3	0x0600004d
+			IMX8QXP_QSPI0A_DQS_LSIO_QSPI0A_DQS	0x0600004d
+			IMX8QXP_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B	0x0600004d
+			IMX8QXP_QSPI0A_SCLK_LSIO_QSPI0A_SCLK	0x0600004d
+			IMX8QXP_QSPI0B_SCLK_LSIO_QSPI0B_SCLK	0x0600004d
+			IMX8QXP_QSPI0B_DATA0_LSIO_QSPI0B_DATA0	0x0600004d
+			IMX8QXP_QSPI0B_DATA1_LSIO_QSPI0B_DATA1	0x0600004d
+			IMX8QXP_QSPI0B_DATA2_LSIO_QSPI0B_DATA2	0x0600004d
+			IMX8QXP_QSPI0B_DATA3_LSIO_QSPI0B_DATA3	0x0600004d
+			IMX8QXP_QSPI0B_DQS_LSIO_QSPI0B_DQS	0x0600004d
+			IMX8QXP_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B	0x0600004d
+			IMX8QXP_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B	0x0600004d
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL	0x06000021
+			IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA	0x06000021
+		>;
+	};
+
+	pinctrl_lpi2c1gpio: lpi2c1gpiogrp {
+		fsl,pins = <
+			IMX8QXP_MIPI_DSI0_GPIO0_00_LSIO_GPIO1_IO27	0x06000021
+			IMX8QXP_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO28	0x06000021
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK	0x06000041
+			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD	0x00000021
+			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK	0x06000040
+			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD	0x00000020
+			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020
+			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020
+			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020
+			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020
+			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020
+			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020
+			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020
+			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020
+			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000040
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK	0x06000040
+			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD	0x00000020
+			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020
+			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020
+			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020
+			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020
+			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020
+			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020
+			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020
+			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020
+			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000040
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi b/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi
new file mode 100644
index 000000000000..478cc8ede05e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc1;
+		rtc1 = &rtc;
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_lvds0>;
+		/* PWM support still missing */
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&lsio_gpio1 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	backlight_lvds1: backlight-lvds1 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_lvds1>;
+		/* PWM support still missing */
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	chosen {
+		stdout-path = &lpuart0;
+	};
+
+	panel_lvds0: panel-lvds0 {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT
+		 */
+		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_lvds0>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds0: endpoint {
+			};
+		};
+	};
+
+	panel_lvds1: panel-lvds1 {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT
+		 */
+		backlight = <&backlight_lvds1>;
+		power-supply = <&reg_lvds1>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds1: endpoint {
+			};
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "12V0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		ssi-controller = <&sai1>;
+		audio-codec = <&tlv320aic3x04>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	status = "okay";
+};
+
+&flexcan2 {
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan3 {
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&i2c0 {
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&mclkout0_lpcg 0>;
+		clock-names = "mclk";
+		iov-supply = <&reg_1v8>;
+		ldoin-supply = <&reg_3v3>;
+	};
+
+	eeprom2: eeprom@57 {
+		compatible = "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_3v3>;
+	};
+};
+
+&lpspi1 {
+	status = "okay";
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&lpuart3 {
+	status = "okay";
+};
+
+&reg_sdvmmc {
+	off-on-delay-us = <200000>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	over-current-active-low;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_sdvmmc>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/tqma8xxs.dtsi b/arch/arm64/boot/dts/freescale/tqma8xxs.dtsi
new file mode 100644
index 000000000000..2d0a329c2fa5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqma8xxs.dtsi
@@ -0,0 +1,768 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+
+/delete-node/ &encoder_rpc;
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/*
+		 * DRAM base addr, minimal size : 1024 MiB DRAM
+		 * should be corrected by bootloader
+		 */
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_tqma8xxs_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_lvds0: regulator-lvds0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds0>;
+		regulator-name = "LCD0_VDD_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&lsio_gpio1 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds1: regulator-lvds1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds1>;
+		regulator-name = "LCD1_VDD_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&lsio_gpio1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sdvmmc: regulator-sdvmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sdvmmc>;
+		regulator-name = "SD1_VMMC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC0_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vqmmc: regulator-vqmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC0_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * global autoconfigured region for contiguous allocations
+		 * must not exceed memory size and region
+		 */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x20000000>;
+			alloc-ranges = <0 0x96000000 0 0x30000000>;
+			linux,cma-default;
+		};
+
+		decoder_boot: decoder-boot@84000000 {
+			reg = <0 0x84000000 0 0x2000000>;
+			no-map;
+		};
+
+		encoder_boot: encoder-boot@86000000 {
+			reg = <0 0x86000000 0 0x200000>;
+			no-map;
+		};
+
+		m4_reserved: m4@88000000 {
+			no-map;
+			reg = <0 0x88000000 0 0x8000000>;
+			status = "disabled";
+		};
+
+		vdev0vring0: vdev0vring0@90000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90000000 0 0x8000>;
+			no-map;
+			status = "disabled";
+		};
+
+		vdev0vring1: vdev0vring1@90008000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90008000 0 0x8000>;
+			no-map;
+			status = "disabled";
+		};
+
+		vdev1vring0: vdev1vring0@90010000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90010000 0 0x8000>;
+			no-map;
+			status = "disabled";
+		};
+
+		vdev1vring1: vdev1vring1@90018000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90018000 0 0x8000>;
+			no-map;
+			status = "disabled";
+		};
+
+		rsc_table: rsc-table@900ff000 {
+			reg = <0 0x900ff000 0 0x1000>;
+			no-map;
+			status = "disabled";
+		};
+
+		vdevbuffer: vdevbuffer@90400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90400000 0 0x100000>;
+			no-map;
+			status = "disabled";
+		};
+
+		decoder_rpc: decoder-rpc@92000000 {
+			reg = <0 0x92000000 0 0x100000>;
+			no-map;
+		};
+
+		encoder_rpc: encoder-rpc@92100000 {
+			reg = <0 0x92100000 0 0x700000>;
+			no-map;
+		};
+	};
+
+};
+
+/* TQMa8XxS only uses industrial grade, reduce trip points accordingly */
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <100000>;
+};
+/* end of temperature grade adjustments */
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	mac-address = [ 00 00 00 00 00 00 ];
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&lsio_gpio3 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&lsio_gpio1>;
+			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		ethphy3: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ethphy1>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&lsio_gpio0 24 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&lsio_gpio1>;
+			interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec2>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	fsl,magic-packet;
+	mac-address = [ 00 00 00 00 00 00 ];
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+};
+
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+};
+
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <66000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&lsio_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_smarc_fangpio>, <&pinctrl_smarc_mngtpio>;
+
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "LID", "SLEEP", "CHARGING#", "CHGPRSNT#",
+			  "BATLOW#", "", "", "",
+			  "", "SMARC_GPIO6", "SMARC_GPIO5", "",
+			  "PHY3 RST#", "", "", "SPI0_CS0",
+			  "", "SPI0_CS1", "", "";
+};
+
+&lsio_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_smarc_gpio>;
+
+	gpio-line-names = "LCD1_BLKT_EN", "LCD1_VDD_EN", "LCD0_BLKT_EN", "LCD0_VDD_EN",
+			  "SMARC_GPIO0", "SMARC_GPIO1", "SMARC_GPIO2", "",
+			  "SMARC_GPIO3", "SMARC_GPIO8", "SMARC_GPIO7", "SMARC_GPIO10",
+			  "SMARC_GPIO9", "SMARC_GPIO4", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&lsio_gpio2 {
+	gpio-line-names = "RTC_INT#", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&lsio_gpio3 {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "PHY0_RST#", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&lsio_gpio4 {
+	gpio-line-names = "PCIE_PERST#", "", "PCIE_WAKE#", "USB_OTG1_PWR",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "SDIO_PWR_EN",
+			  "", "SDIO_WP", "SDIO_CD#", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c0>;
+	pinctrl-1 = <&pinctrl_lpi2c0_gpio>;
+	scl-gpios = <&lsio_gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&lsio_gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	/* NXP SE97BTP with temperature sensor + eeprom */
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_tqma8xxs_3v3>;
+	};
+
+	rtc1: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		quartz-load-femtofarads = <7000>;
+		interrupt-parent = <&lsio_gpio2>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	eeprom1: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_tqma8xxs_3v3>;
+	};
+
+	pcieclk: clock-generator@6a {
+		compatible = "renesas,9fgv0241";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
+};
+
+&lpspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	cs-gpios = <&lsio_gpio0 27 GPIO_ACTIVE_LOW>, <&lsio_gpio0 29 GPIO_ACTIVE_LOW>;
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+};
+
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+};
+
+&mu_m0 {
+	status = "okay";
+};
+
+&mu1_m0 {
+	status = "okay";
+};
+
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg 0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&thermal_zones {
+	pmic0_thermal: pmic0-thermal {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&pmic_alert0>;
+				cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_vmmc>;
+	vqmmc-supply = <&reg_vqmmc>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	/* NOTE: CD / WP and VMMC support depends on mainboard */
+};
+
+&vpu {
+	compatible = "nxp,imx8qxp-vpu";
+	status = "okay";
+};
+
+&vpu_core0 {
+	memory-region = <&decoder_boot>, <&decoder_rpc>;
+	status = "okay";
+};
+
+&vpu_core1 {
+	memory-region = <&encoder_boot>, <&encoder_rpc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight_lvds0: backlight-lvds0grp {
+		fsl,pins = <IMX8QXP_SPI2_SDI_LSIO_GPIO1_IO02	0x00000021>;
+	};
+
+	pinctrl_backlight_lvds1: backlight-lvds1grp {
+		fsl,pins = <IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00	0x00000021>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <IMX8QXP_UART2_TX_ADMA_FLEXCAN1_TX	0x00000021>,
+			   <IMX8QXP_UART2_RX_ADMA_FLEXCAN1_RX	0x00000021>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX	0x00000021>,
+			   <IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX	0x00000021>;
+	};
+
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO30	0x00000040>,
+			   <IMX8QXP_QSPI0B_DQS_LSIO_GPIO3_IO22		0x00000040>;
+	};
+
+	pinctrl_ethphy1: ethphy1grp {
+		fsl,pins = <IMX8QXP_ADC_IN4_LSIO_GPIO1_IO14		0x00000040>,
+			   <IMX8QXP_UART1_CTS_B_LSIO_GPIO0_IO24		0x00000040>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000041>,
+			   <IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000041>,
+			   <IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x00000040>;
+	};
+
+	pinctrl_fec2: fec2grp {
+		fsl,pins = <IMX8QXP_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL		0x00000040>,
+			   <IMX8QXP_ESAI0_FSR_CONN_ENET1_RGMII_TXC		0x00000040>,
+			   <IMX8QXP_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0		0x00000040>,
+			   <IMX8QXP_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1		0x00000040>,
+			   <IMX8QXP_ESAI0_FST_CONN_ENET1_RGMII_TXD2		0x00000040>,
+			   <IMX8QXP_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3		0x00000040>,
+			   <IMX8QXP_ESAI0_TX0_CONN_ENET1_RGMII_RXC		0x00000040>,
+			   <IMX8QXP_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL		0x00000040>,
+			   <IMX8QXP_SPDIF0_RX_CONN_ENET1_RGMII_RXD0		0x00000040>,
+			   <IMX8QXP_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1		0x00000040>,
+			   <IMX8QXP_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2		0x00000040>,
+			   <IMX8QXP_ESAI0_TX1_CONN_ENET1_RGMII_RXD3		0x00000040>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA0_LSIO_QSPI0A_DATA0	0x0000004d>,
+			   <IMX8QXP_QSPI0A_DATA1_LSIO_QSPI0A_DATA1	0x0000004d>,
+			   <IMX8QXP_QSPI0A_DATA2_LSIO_QSPI0A_DATA2	0x0000004d>,
+			   <IMX8QXP_QSPI0A_DATA3_LSIO_QSPI0A_DATA3	0x0000004d>,
+			   <IMX8QXP_QSPI0A_DQS_LSIO_QSPI0A_DQS		0x0000004d>,
+			   <IMX8QXP_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B	0x0000004d>,
+			   <IMX8QXP_QSPI0A_SCLK_LSIO_QSPI0A_SCLK	0x0000004d>,
+			   <IMX8QXP_QSPI0B_SCLK_LSIO_QSPI0B_SCLK	0x0000004d>,
+			   <IMX8QXP_QSPI0B_DATA0_LSIO_QSPI0B_DATA0	0x0000004d>,
+			   <IMX8QXP_QSPI0B_DATA1_LSIO_QSPI0B_DATA1	0x0000004d>,
+			   <IMX8QXP_QSPI0B_DATA2_LSIO_QSPI0B_DATA2	0x0000004d>,
+			   <IMX8QXP_QSPI0B_DATA3_LSIO_QSPI0B_DATA3	0x0000004d>,
+			   <IMX8QXP_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B	0x0000004d>,
+			   <IMX8QXP_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B	0x0000004d>;
+	};
+
+	pinctrl_smarc_gpio: smarcgpiogrp {
+		fsl,pins = /* SMARC_GPIO0 / CAM0_PWR# */
+			   <IMX8QXP_SPI0_SCK_LSIO_GPIO1_IO04	0x00000021>,
+			   /* SMARC_GPIO1 / CAM1_PWR# */
+			   <IMX8QXP_SPI0_SDI_LSIO_GPIO1_IO05	0x00000021>,
+			   /* SMARC_GPIO2 / CAM0_RST# */
+			   <IMX8QXP_SPI0_SDO_LSIO_GPIO1_IO06	0x00000021>,
+			   /* SMARC_GPIO3 / CAM1_RST# */
+			   <IMX8QXP_SPI0_CS0_LSIO_GPIO1_IO08	0x00000021>,
+			   /* SMARC_GPIO4 / HDA_RST# */
+			   <IMX8QXP_ADC_IN5_LSIO_GPIO1_IO13	0x00000021>,
+			   /* SMARC_GPIO7 */
+			   <IMX8QXP_ADC_IN0_LSIO_GPIO1_IO10	0x00000021>,
+			   /* SMARC_GPIO8 */
+			   <IMX8QXP_ADC_IN1_LSIO_GPIO1_IO09	0x00000021>,
+			   /* SMARC_GPIO9 */
+			   <IMX8QXP_ADC_IN2_LSIO_GPIO1_IO12	0x00000021>,
+			   /* SMARC_GPIO10 */
+			   <IMX8QXP_ADC_IN3_LSIO_GPIO1_IO11	0x00000021>;
+	};
+
+	pinctrl_smarc_fangpio: smarcfangpiogrp {
+		fsl,pins = /* SMARC_GPIO5 */
+			   <IMX8QXP_UART1_RX_LSIO_GPIO0_IO22	0x00000021>,
+			   /* SMARC_GPIO6 */
+			   <IMX8QXP_UART1_TX_LSIO_GPIO0_IO21	0x00000021>;
+	};
+
+	pinctrl_smarc_mngtpio: smarcmngtgpiogrp {
+		fsl,pins = /* SMARC BATLOW# */
+			   <IMX8QXP_SPI3_CS0_LSIO_GPIO0_IO16		0x00000021>,
+			   /* SMARC SLEEP */
+			   <IMX8QXP_SPI3_SCK_LSIO_GPIO0_IO13		0x00000021>,
+			   /* SMARC CHGPRSNT# */
+			   <IMX8QXP_SPI3_SDI_LSIO_GPIO0_IO15		0x00000021>,
+			   /* SMARC CHARGING# */
+			   <IMX8QXP_SPI3_SDO_LSIO_GPIO0_IO14		0x00000021>,
+			   /* SMARC LID */
+			   <IMX8QXP_SPDIF0_EXT_CLK_LSIO_GPIO0_IO12	0x00000021>;
+	};
+
+	pinctrl_lvds0: lbdpanel0grp {
+		fsl,pins = /* LCD PWR */
+			<IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03		0x00000021>;
+	};
+
+	pinctrl_lvds1: lbdpanel1grp {
+		fsl,pins = /* LCD PWR */
+			<IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01		0x00000021>;
+	};
+
+	pinctrl_lpi2c0: lpi2c0grp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL	0x06000021>,
+			   <IMX8QXP_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA	0x06000021>;
+	};
+
+	pinctrl_lpi2c0_gpio: lpi2c0gpiogrp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_GPIO0_00_LSIO_GPIO3_IO08	0x00000021>,
+			   <IMX8QXP_MIPI_CSI0_GPIO0_01_LSIO_GPIO3_IO07	0x00000021>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <IMX8QXP_UART0_RX_ADMA_UART0_RX		0x06000020>,
+			   <IMX8QXP_UART0_TX_ADMA_UART0_TX		0x06000020>,
+			   <IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B	0x06000020>,
+			   <IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B	0x06000020>;
+	};
+
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <IMX8QXP_SCU_GPIO0_00_ADMA_UART3_RX		0x06000020>,
+			   <IMX8QXP_SCU_GPIO0_01_ADMA_UART3_TX		0x06000020>;
+	};
+
+	pinctrl_i2c0_mipi_lvds0: mipi-lvds0-i2c0grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL	0x06000021>,
+			   <IMX8QXP_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA	0x06000021>;
+	};
+
+	pinctrl_i2c0_gpio_mipi_lvds0: mipi-lvds0-i2c0-gpiogrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_I2C0_SCL_LSIO_GPIO1_IO25	0x0000021>,
+			   <IMX8QXP_MIPI_DSI0_I2C0_SDA_LSIO_GPIO1_IO26	0x0000021>;
+	};
+
+	pinctrl_pcieb: pcieagrp {
+		fsl,pins = <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00	0x06000041>,
+			   <IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01	0x06000041>,
+			   <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02	0x04000041>;
+	};
+
+	pinctrl_pwm_mipi_lvds0: mipi-lvds0-pwmgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_GPIO0_00_MIPI_DSI0_PWM0_OUT	0x00000021>;
+	};
+
+	pinctrl_pwm_mipi_lvds1: mipi-lvds1-pwmgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_MIPI_DSI1_PWM0_OUT	0x00000021>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00		0x00000021>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK		0x06000040>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD		0x00000020>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000040>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1100mhzgrp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1200mhzgrp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041>;
+	};
+
+	pinctrl_sdvmmc: sdvmmcgrp {
+		fsl,pins = <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19	0x00000021>;
+	};
+
+	pinctrl_spi1: spi1grp {
+		fsl,pins = /* PD + PDRV Low + INOUT - MEK has 0x0600004c */
+			   <IMX8QXP_SAI0_TXC_ADMA_SPI1_SDI		0x06000041>,
+			   <IMX8QXP_SAI0_TXD_ADMA_SPI1_SDO		0x06000041>,
+			   <IMX8QXP_SAI0_TXFS_ADMA_SPI1_SCK		0x06000041>,
+			   <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27		0x00000021>,
+			   <IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29		0x00000021>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <IMX8QXP_MCLK_OUT0_ADMA_ACM_MCLK_OUT0	0x06000040>,
+			   <IMX8QXP_SAI1_RXC_ADMA_SAI1_TXC		0x06000040>,
+			   <IMX8QXP_SAI1_RXFS_ADMA_SAI1_TXFS		0x06000040>,
+			   <IMX8QXP_FLEXCAN1_RX_ADMA_SAI1_TXD		0x06000040>,
+			   <IMX8QXP_FLEXCAN1_TX_ADMA_SAI1_RXD		0x06000040>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <IMX8QXP_USB_SS3_TC0_CONN_USB_OTG1_PWR	0x00000021>,
+			   <IMX8QXP_USB_SS3_TC2_CONN_USB_OTG1_OC	0x00000021>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21		0x00000021>,
+			   <IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22		0x00000021>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2100mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2200mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi b/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi
new file mode 100644
index 000000000000..4c38dd541143
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2019,2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for MBLS10xxA from TQ (FMAN related sections)
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+
+&enet0 {
+	status = "disabled";
+};
+
+&enet1 {
+	status = "disabled";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii";
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&enet3 {
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii";
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&enet4 {
+	status = "disabled";
+};
+
+&enet5 {
+	status = "disabled";
+};
+
+&enet6 {
+	status = "disabled";
+};
+
+&mdio0 {
+	status = "okay";
+
+	qsgmii2_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x00>;
+	};
+
+	qsgmii2_phy2: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x01>;
+	};
+
+	qsgmii2_phy3: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x02>;
+	};
+
+	qsgmii2_phy4: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x03>;
+	};
+
+	rgmii_phy2: ethernet-phy@c {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0c>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+	};
+
+	rgmii_phy1: ethernet-phy@e {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0e>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+	};
+
+	qsgmii1_phy1: ethernet-phy@1c {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1c>;
+	};
+
+	qsgmii1_phy2: ethernet-phy@1d {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1d>;
+	};
+
+	qsgmii1_phy3: ethernet-phy@1e {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1e>;
+	};
+
+	qsgmii1_phy4: ethernet-phy@1f {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1f>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi b/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi
new file mode 100644
index 000000000000..9d44f488c083
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for MBLS10xxA from TQ (MC related sections)
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+
+};
+
+&dpmac1 {
+	pcs-handle = <&pcs1>;
+};
+
+&dpmac2 {
+	pcs-handle = <&pcs2>;
+};
+
+&dpmac3 {
+	pcs-handle = <&pcs3_0>;
+};
+
+&dpmac4 {
+	pcs-handle = <&pcs3_1>;
+};
+
+&dpmac5 {
+	pcs-handle = <&pcs3_2>;
+};
+
+&dpmac6 {
+	pcs-handle = <&pcs3_3>;
+};
+
+&dpmac7 {
+	pcs-handle = <&pcs7_0>;
+};
+
+&dpmac8 {
+	pcs-handle = <&pcs7_1>;
+};
+
+&dpmac9 {
+	pcs-handle = <&pcs7_2>;
+};
+
+&dpmac10 {
+	pcs-handle = <&pcs7_3>;
+};
+
+&emdio1 {
+	status = "okay";
+
+	qsgmii2_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x00>;
+	};
+
+	qsgmii2_phy2: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x01>;
+	};
+
+	qsgmii2_phy3: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x02>;
+	};
+
+	qsgmii2_phy4: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x03>;
+	};
+
+	rgmii_phy2: ethernet-phy@c {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0c>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+	};
+
+	rgmii_phy1: ethernet-phy@e {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0e>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+	};
+
+	qsgmii1_phy1: ethernet-phy@1c {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1c>;
+	};
+
+	qsgmii1_phy2: ethernet-phy@1d {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1d>;
+	};
+
+	qsgmii1_phy3: ethernet-phy@1e {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1e>;
+	};
+
+	qsgmii1_phy4: ethernet-phy@1f {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1f>;
+	};
+};
+
+&pcs_mdio1 {
+	status = "okay";
+};
+
+&pcs_mdio2 {
+	status = "okay";
+};
+
+&pcs_mdio3 {
+	status = "okay";
+};
+
+&pcs_mdio7 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi
new file mode 100644
index 000000000000..444bbf511596
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for MBLS10xxA from TQ
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+		autorepeat;
+
+		button-0 {
+			label = "button0";
+			gpios = <&gpioexp3 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F1>;
+		};
+
+		button-1 {
+			label = "button1";
+			gpios = <&gpioexp3 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user {
+			gpios = <&gpioexp3 13 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sfp1: sfp1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp1_i2c>;
+		mod-def0-gpios = <&gpioexp2 2 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioexp2 3 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioexp2 0 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioexp2 1 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	sfp2: sfp2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp2_i2c>;
+		mod-def0-gpios = <&gpioexp2 10 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioexp2 11 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioexp2 8 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioexp2 9 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&reg_3v3>;
+
+		i2c@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpioexp1: gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				vcc-supply = <&reg_3v3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpioexp2: gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				vcc-supply = <&reg_3v3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpioexp3: gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				vcc-supply = <&reg_3v3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		sfp1_i2c: i2c@1 {
+			reg = <0x1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sfp2_i2c: i2c@2 {
+			reg = <0x2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c@3 {
+			reg = <0x3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi
new file mode 100644
index 000000000000..7da1bfd83cca
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for TQMLs10xxA SoM of TQ
+ */
+
+/ {
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	temperature-sensor@18 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x18>;
+	};
+
+	eeprom@50 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vcc3v3>;
+		read-only;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&esdhc {
+	/* eSDHC or eMMC: set by bootloader */
+	non-removable;
+	disable-wp;
+	mmc-hs200-1_8v;
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi
index 79a55a0fa2f1..4c6a075908d1 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi
@@ -17,6 +17,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu0>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -34,6 +35,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu1>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -51,6 +53,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu2>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -68,6 +71,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu3>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -160,6 +164,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu4>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -177,6 +182,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu5>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -194,6 +200,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu6>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -211,6 +218,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu7>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 0192a01bf852..3f13a960f34e 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -85,28 +85,28 @@
 	leds {
 		compatible = "gpio-leds";
 
-		user_led1 {
+		led-user-1 {
 			label = "green:user1";
 			/* gpio_150_user_led1 */
 			gpios = <&gpio18 6 0>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		user_led2 {
+		led-user-2 {
 			label = "green:user2";
 			/* gpio_151_user_led2 */
 			gpios = <&gpio18 7 0>;
 			linux,default-trigger = "none";
 		};
 
-		user_led3 {
+		led-user-3 {
 			label = "green:user3";
 			/* gpio_189_user_led3 */
 			gpios = <&gpio23 5 0>;
 			linux,default-trigger = "mmc0";
 		};
 
-		user_led4 {
+		led-user-4 {
 			label = "green:user4";
 			/* gpio_190_user_led4 */
 			gpios = <&gpio23 6 0>;
@@ -114,7 +114,7 @@
 			linux,default-trigger = "none";
 		};
 
-		wlan_active_led {
+		led-wlan {
 			label = "yellow:wlan";
 			/* gpio_205_wifi_active */
 			gpios = <&gpio25 5 0>;
@@ -122,7 +122,7 @@
 			default-state = "off";
 		};
 
-		bt_active_led {
+		led-bt {
 			label = "blue:bt";
 			gpios = <&gpio25 7 0>;
 			/* gpio_207_user_led1 */
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 8343d0cedde3..957a1b41f19b 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -203,10 +203,14 @@
 
 		A53_L2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		A73_L2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -1157,7 +1161,7 @@
 		};
 
 		usb3_otg_bc: usb3_otg_bc@ff200000 {
-			compatible = "syscon", "simple-mfd";
+			compatible = "hisilicon,hi3660-usb3-otg-bc", "syscon", "simple-mfd";
 			reg = <0x0 0xff200000 0x0 0x1000>;
 
 			usb_phy: usb-phy {
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
index a83b9d4f172e..f6bc001c3832 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -31,6 +31,13 @@
 			device_type = "cpu";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-size = <0x8000>; /* 32 KiB */
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>; /* 32 KiB */
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&L2>;
 		};
 
 		cpu@1 {
@@ -38,6 +45,13 @@
 			device_type = "cpu";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-size = <0x8000>; /* 32 KiB */
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>; /* 32 KiB */
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&L2>;
 		};
 
 		cpu@2 {
@@ -45,6 +59,13 @@
 			device_type = "cpu";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-size = <0x8000>; /* 32 KiB */
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>; /* 32 KiB */
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&L2>;
 		};
 
 		cpu@3 {
@@ -52,13 +73,33 @@
 			device_type = "cpu";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-size = <0x8000>; /* 32 KiB */
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>; /* 32 KiB */
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&L2>;
 		};
 	};
 
+	L2: l2-cache {
+		compatible = "cache";
+		cache-unified;
+		cache-size = <0x80000>; /* 512 KiB */
+		cache-line-size = <64>;
+		cache-sets = <512>;
+		cache-level = <2>;
+	};
+
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		reg = <0x0 0xf1001000 0x0 0x1000>,  /* GICD */
-		      <0x0 0xf1002000 0x0 0x100>;   /* GICC */
+		      <0x0 0xf1002000 0x0 0x2000>,  /* GICC */
+		      <0x0 0xf1004000 0x0 0x2000>,  /* GICH */
+		      <0x0 0xf1006000 0x0 0x2000>;  /* GICV */
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_HIGH)>;
 		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -302,8 +343,8 @@
 			compatible = "snps,dw-mshc";
 			reg = <0x9820000 0x10000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HISTB_SDIO0_CIU_CLK>,
-				 <&crg HISTB_SDIO0_BIU_CLK>;
+			clocks = <&crg HISTB_SDIO0_BIU_CLK>,
+				 <&crg HISTB_SDIO0_CIU_CLK>;
 			clock-names = "biu", "ciu";
 			resets = <&crg 0x9c 4>;
 			reset-names = "reset";
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 629e604aa281..2d304efe081d 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -82,7 +82,7 @@
 		};
 	};
 
-	reg_sys_5v: regulator@0 {
+	reg_sys_5v: regulator-0 {
 		compatible = "regulator-fixed";
 		regulator-name = "SYS_5V";
 		regulator-min-microvolt = <5000000>;
@@ -91,7 +91,7 @@
 		regulator-always-on;
 	};
 
-	reg_vdd_3v3: regulator@1 {
+	reg_vdd_3v3: regulator-1 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -101,7 +101,7 @@
 		vin-supply = <&reg_sys_5v>;
 	};
 
-	reg_5v_hub: regulator@2 {
+	reg_5v_hub: regulator-2 {
 		compatible = "regulator-fixed";
 		regulator-name = "5V_HUB";
 		regulator-min-microvolt = <5000000>;
@@ -125,39 +125,39 @@
 	leds {
 		compatible = "gpio-leds";
 
-		user_led1 {
+		led-user-1 {
 			label = "green:user1";
 			gpios = <&gpio4 0 0>; /* <&gpio_user_led_1>; */
 			linux,default-trigger = "heartbeat";
 		};
 
-		user_led2 {
+		led-user-2 {
 			label = "green:user2";
 			gpios = <&gpio4 1 0>; /* <&gpio_user_led_2>; */
 			linux,default-trigger = "mmc0";
 		};
 
-		user_led3 {
+		led-user-3 {
 			label = "green:user3";
 			gpios = <&gpio4 2 0>; /* <&gpio_user_led_3>; */
 			linux,default-trigger = "mmc1";
 		};
 
-		user_led4 {
+		led-user-4 {
 			label = "green:user4";
 			gpios = <&gpio4 3 0>; /* <&gpio_user_led_4>; */
 			panic-indicator;
 			linux,default-trigger = "none";
 		};
 
-		wlan_active_led {
+		led-wlan {
 			label = "yellow:wlan";
 			gpios = <&gpio3 5 0>; /* <&gpio_wlan_active_led>; */
 			linux,default-trigger = "phy0tx";
 			default-state = "off";
 		};
 
-		bt_active_led {
+		led-bt {
 			label = "blue:bt";
 			gpios = <&gpio4 7 0>; /* <&gpio_bt_active_led>; */
 			linux,default-trigger = "hci0-power";
@@ -514,6 +514,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			port@0 {
+				reg = <0>;
 				adv7533_in: endpoint {
 					remote-endpoint = <&dsi_out0>;
 				};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index ae0a7cfeeb47..f8b56d443850 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -186,10 +186,14 @@
 
 		CLUSTER0_L2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		CLUSTER1_L2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -405,7 +409,7 @@
 			compatible = "pinctrl-single";
 			reg = <0x0 0xf7010000  0x0 0x27c>;
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			#pinctrl-cells = <1>;
 			#gpio-range-cells = <3>;
 			pinctrl-single,register-width = <32>;
@@ -444,7 +448,7 @@
 			compatible = "pinconf-single";
 			reg = <0x0 0xf7010800 0x0 0x28c>;
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			#pinctrl-cells = <1>;
 			pinctrl-single,register-width = <32>;
 		};
@@ -453,7 +457,7 @@
 			compatible = "pinconf-single";
 			reg = <0x0 0xf8001800 0x0 0x78>;
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			#pinctrl-cells = <1>;
 			pinctrl-single,register-width = <32>;
 		};
@@ -723,8 +727,6 @@
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xf7106000 0x0 0x1000>;
 			interrupts = <0 50 4>;
-			bus-id = <0>;
-			enable-dma = <0>;
 			clocks = <&sys_ctrl HI6220_SPI_CLK>, <&sys_ctrl HI6220_SPI_CLK>;
 			clock-names = "sspclk", "apb_pclk";
 			pinctrl-names = "default";
@@ -848,7 +850,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		tsensor: tsensor@0,f7030700 {
+		tsensor: tsensor@f7030700 {
 			compatible = "hisilicon,tsensor";
 			reg = <0x0 0xf7030700 0x0 0x1000>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -857,7 +859,7 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		i2s0: i2s@f7118000{
+		i2s0: i2s@f7118000 {
 			compatible = "hisilicon,hi6210-i2s";
 			reg = <0x0 0xf7118000 0x0 0x8000>; /* i2s unit */
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* 155 "DigACodec_intr"-32 */
@@ -1028,17 +1030,17 @@
 			compatible = "hisilicon,hi6220-mali", "arm,mali-450";
 			reg = <0x0 0xf4080000 0x0 0x00040000>;
 			interrupt-parent = <&gic>;
-			interrupts =	<GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>;
 
 			interrupt-names = "gp",
 					  "gpmmu",
diff --git a/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi
index e7d22619a4c0..3e27624c31de 100644
--- a/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi
@@ -17,13 +17,13 @@
 				&bl_pwm_pmx_func
 				>;
 
-			boot_sel_pmx_func: boot_sel_pmx_func {
+			boot_sel_pmx_func: boot-sel-pins {
 				pinctrl-single,pins = <
 					0x0    MUX_M0	/* BOOT_SEL     (IOMG000) */
 				>;
 			};
 
-			emmc_pmx_func: emmc_pmx_func {
+			emmc_pmx_func: emmc-pins {
 				pinctrl-single,pins = <
 					0x100  MUX_M0	/* EMMC_CLK     (IOMG064) */
 					0x104  MUX_M0	/* EMMC_CMD     (IOMG065) */
@@ -38,7 +38,7 @@
 				>;
 			};
 
-			sd_pmx_func: sd_pmx_func {
+			sd_pmx_func: sd-pins {
 				pinctrl-single,pins = <
 					0xc    MUX_M0	/* SD_CLK       (IOMG003) */
 					0x10   MUX_M0	/* SD_CMD       (IOMG004) */
@@ -48,7 +48,7 @@
 					0x20   MUX_M0	/* SD_DATA3     (IOMG008) */
 				>;
 			};
-			sd_pmx_idle: sd_pmx_idle {
+			sd_pmx_idle: sd-idle-pins {
 				pinctrl-single,pins = <
 					0xc    MUX_M1	/* SD_CLK       (IOMG003) */
 					0x10   MUX_M1	/* SD_CMD       (IOMG004) */
@@ -59,7 +59,7 @@
 				>;
 			};
 
-			sdio_pmx_func: sdio_pmx_func {
+			sdio_pmx_func: sdio-pins {
 				pinctrl-single,pins = <
 					0x128  MUX_M0	/* SDIO_CLK     (IOMG074) */
 					0x12c  MUX_M0	/* SDIO_CMD     (IOMG075) */
@@ -69,7 +69,7 @@
 					0x13c  MUX_M0	/* SDIO_DATA3   (IOMG079) */
 				>;
 			};
-			sdio_pmx_idle: sdio_pmx_idle {
+			sdio_pmx_idle: sdio-idle-pins {
 				pinctrl-single,pins = <
 					0x128  MUX_M1	/* SDIO_CLK     (IOMG074) */
 					0x12c  MUX_M1	/* SDIO_CMD     (IOMG075) */
@@ -80,7 +80,7 @@
 				>;
 			};
 
-			isp_pmx_func: isp_pmx_func {
+			isp_pmx_func: isp-pins {
 				pinctrl-single,pins = <
 					0x24   MUX_M0	/* ISP_PWDN0    (IOMG009) */
 					0x28   MUX_M0	/* ISP_PWDN1    (IOMG010) */
@@ -101,19 +101,19 @@
 				>;
 			};
 
-			hkadc_ssi_pmx_func: hkadc_ssi_pmx_func {
+			hkadc_ssi_pmx_func: hkadc-ssi-pins {
 				pinctrl-single,pins = <
 					0x68   MUX_M0	/* HKADC_SSI    (IOMG026) */
 				>;
 			};
 
-			codec_clk_pmx_func: codec_clk_pmx_func {
+			codec_clk_pmx_func: codec-clk-pins {
 				pinctrl-single,pins = <
 					0x6c   MUX_M0	/* CODEC_CLK    (IOMG027) */
 				>;
 			};
 
-			codec_pmx_func: codec_pmx_func {
+			codec_pmx_func: codec-pins {
 				pinctrl-single,pins = <
 					0x70   MUX_M1	/* DMIC_CLK     (IOMG028) */
 					0x74   MUX_M0	/* CODEC_SYNC   (IOMG029) */
@@ -122,7 +122,7 @@
 				>;
 			};
 
-			fm_pmx_func: fm_pmx_func {
+			fm_pmx_func: fm-pins {
 				pinctrl-single,pins = <
 					0x80   MUX_M1	/* FM_XCLK      (IOMG032) */
 					0x84   MUX_M1	/* FM_XFS       (IOMG033) */
@@ -131,7 +131,7 @@
 				>;
 			};
 
-			bt_pmx_func: bt_pmx_func {
+			bt_pmx_func: bt-pins {
 				pinctrl-single,pins = <
 					0x90   MUX_M0	/* BT_XCLK      (IOMG036) */
 					0x94   MUX_M0	/* BT_XFS       (IOMG037) */
@@ -140,26 +140,26 @@
 				>;
 			};
 
-			pwm_in_pmx_func: pwm_in_pmx_func {
+			pwm_in_pmx_func: pwm-in-pins {
 				pinctrl-single,pins = <
 					0xb8   MUX_M1	/* PWM_IN       (IOMG046) */
 				>;
 			};
 
-			bl_pwm_pmx_func: bl_pwm_pmx_func {
+			bl_pwm_pmx_func: bl-pwm-pins {
 				pinctrl-single,pins = <
 					0xbc   MUX_M1	/* BL_PWM       (IOMG047) */
 				>;
 			};
 
-			uart0_pmx_func: uart0_pmx_func {
+			uart0_pmx_func: uart0-pins {
 				pinctrl-single,pins = <
 					0xc0   MUX_M0	/* UART0_RXD    (IOMG048) */
 					0xc4   MUX_M0	/* UART0_TXD    (IOMG049) */
 				>;
 			};
 
-			uart1_pmx_func: uart1_pmx_func {
+			uart1_pmx_func: uart1-pins {
 				pinctrl-single,pins = <
 					0xc8   MUX_M0	/* UART1_CTS_N  (IOMG050) */
 					0xcc   MUX_M0	/* UART1_RTS_N  (IOMG051) */
@@ -168,7 +168,7 @@
 				>;
 			};
 
-			uart2_pmx_func: uart2_pmx_func {
+			uart2_pmx_func: uart2-pins {
 				pinctrl-single,pins = <
 					0xd8   MUX_M0	/* UART2_CTS_N  (IOMG054) */
 					0xdc   MUX_M0	/* UART2_RTS_N  (IOMG055) */
@@ -177,7 +177,7 @@
 				>;
 			};
 
-			uart3_pmx_func: uart3_pmx_func {
+			uart3_pmx_func: uart3-pins {
 				pinctrl-single,pins = <
 					0x180  MUX_M1	/* UART3_CTS_N  (IOMG096) */
 					0x184  MUX_M1	/* UART3_RTS_N  (IOMG097) */
@@ -186,7 +186,7 @@
 				>;
 			};
 
-			uart4_pmx_func: uart4_pmx_func {
+			uart4_pmx_func: uart4-pins {
 				pinctrl-single,pins = <
 					0x1d0  MUX_M1	/* UART4_CTS_N  (IOMG116) */
 					0x1d4  MUX_M1	/* UART4_RTS_N  (IOMG117) */
@@ -195,35 +195,35 @@
 				>;
 			};
 
-			uart5_pmx_func: uart5_pmx_func {
+			uart5_pmx_func: uart5-pins {
 				pinctrl-single,pins = <
 					0x1c8  MUX_M1	/* UART5_RXD    (IOMG114) */
 					0x1cc  MUX_M1	/* UART5_TXD    (IOMG115) */
 				>;
 			};
 
-			i2c0_pmx_func: i2c0_pmx_func {
+			i2c0_pmx_func: i2c0-pins {
 				pinctrl-single,pins = <
 					0xe8   MUX_M0	/* I2C0_SCL     (IOMG058) */
 					0xec   MUX_M0	/* I2C0_SDA     (IOMG059) */
 				>;
 			};
 
-			i2c1_pmx_func: i2c1_pmx_func {
+			i2c1_pmx_func: i2c1-pins {
 				pinctrl-single,pins = <
 					0xf0   MUX_M0	/* I2C1_SCL     (IOMG060) */
 					0xf4   MUX_M0	/* I2C1_SDA     (IOMG061) */
 				>;
 			};
 
-			i2c2_pmx_func: i2c2_pmx_func {
+			i2c2_pmx_func: i2c2-pins {
 				pinctrl-single,pins = <
 					0xf8   MUX_M0	/* I2C2_SCL     (IOMG062) */
 					0xfc   MUX_M0	/* I2C2_SDA     (IOMG063) */
 				>;
 			};
 
-			spi0_pmx_func: spi0_pmx_func {
+			spi0_pmx_func: spi0-pins {
 				pinctrl-single,pins = <
 					0x1a0  MUX_M1   /* SPI0_DI      (IOMG104) */
 					0x1a4  MUX_M1	/* SPI0_DO	(IOMG105) */
@@ -244,7 +244,7 @@
 				&bl_pwm_cfg_func
 				>;
 
-			boot_sel_cfg_func: boot_sel_cfg_func {
+			boot_sel_cfg_func: boot-sel-cfg-pins {
 				pinctrl-single,pins = <
 					0x0    0x0	/* BOOT_SEL     (IOCFG000) */
 				>;
@@ -253,7 +253,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			hkadc_ssi_cfg_func: hkadc_ssi_cfg_func {
+			hkadc_ssi_cfg_func: hkadc-ssi-cfg-pins {
 				pinctrl-single,pins = <
 					0x6c   0x0	/* HKADC_SSI    (IOCFG027) */
 				>;
@@ -262,7 +262,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			emmc_clk_cfg_func: emmc_clk_cfg_func {
+			emmc_clk_cfg_func: emmc-clk-cfg-pins {
 				pinctrl-single,pins = <
 					0x104  0x0	/* EMMC_CLK     (IOCFG065) */
 				>;
@@ -271,7 +271,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>;
 			};
 
-			emmc_cfg_func: emmc_cfg_func {
+			emmc_cfg_func: emmc-cfg-pins {
 				pinctrl-single,pins = <
 					0x108  0x0	/* EMMC_CMD     (IOCFG066) */
 					0x10c  0x0	/* EMMC_DATA0   (IOCFG067) */
@@ -288,7 +288,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
 			};
 
-			emmc_rst_cfg_func: emmc_rst_cfg_func {
+			emmc_rst_cfg_func: emmc-rst-cfg-pins {
 				pinctrl-single,pins = <
 					0x12c  0x0	/* EMMC_RST_N   (IOCFG075) */
 				>;
@@ -297,7 +297,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
 			};
 
-			sd_clk_cfg_func: sd_clk_cfg_func {
+			sd_clk_cfg_func: sd-clk-cfg-pins {
 				pinctrl-single,pins = <
 					0xc    0x0	/* SD_CLK       (IOCFG003) */
 				>;
@@ -305,7 +305,7 @@
 				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
 				pinctrl-single,drive-strength = <DRIVE1_10MA DRIVE_MASK>;
 			};
-			sd_clk_cfg_idle: sd_clk_cfg_idle {
+			sd_clk_cfg_idle: sd-clk-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0xc    0x0	/* SD_CLK       (IOCFG003) */
 				>;
@@ -314,7 +314,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			sd_cfg_func: sd_cfg_func {
+			sd_cfg_func: sd-cfg-pins {
 				pinctrl-single,pins = <
 					0x10   0x0	/* SD_CMD       (IOCFG004) */
 					0x14   0x0	/* SD_DATA0     (IOCFG005) */
@@ -326,7 +326,7 @@
 				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
 				pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>;
 			};
-			sd_cfg_idle: sd_cfg_idle {
+			sd_cfg_idle: sd-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x10   0x0	/* SD_CMD       (IOCFG004) */
 					0x14   0x0	/* SD_DATA0     (IOCFG005) */
@@ -339,7 +339,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			sdio_clk_cfg_func: sdio_clk_cfg_func {
+			sdio_clk_cfg_func: sdio-clk-cfg-pins {
 				pinctrl-single,pins = <
 					0x134  0x0	/* SDIO_CLK     (IOCFG077) */
 				>;
@@ -347,7 +347,7 @@
 				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
 				pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>;
 			};
-			sdio_clk_cfg_idle: sdio_clk_cfg_idle {
+			sdio_clk_cfg_idle: sdio-clk-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x134  0x0	/* SDIO_CLK     (IOCFG077) */
 				>;
@@ -356,7 +356,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			sdio_cfg_func: sdio_cfg_func {
+			sdio_cfg_func: sdio-cfg-pins {
 				pinctrl-single,pins = <
 					0x138  0x0	/* SDIO_CMD     (IOCFG078) */
 					0x13c  0x0	/* SDIO_DATA0   (IOCFG079) */
@@ -368,7 +368,7 @@
 				pinctrl-single,bias-pullup    = <PULL_UP   PULL_UP   PULL_DIS  PULL_UP>;
 				pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
 			};
-			sdio_cfg_idle: sdio_cfg_idle {
+			sdio_cfg_idle: sdio-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x138  0x0	/* SDIO_CMD     (IOCFG078) */
 					0x13c  0x0	/* SDIO_DATA0   (IOCFG079) */
@@ -381,7 +381,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			isp_cfg_func1: isp_cfg_func1 {
+			isp_cfg_func1: isp-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0x28   0x0	/* ISP_PWDN0    (IOCFG010) */
 					0x2c   0x0	/* ISP_PWDN1    (IOCFG011) */
@@ -403,7 +403,7 @@
 				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
-			isp_cfg_idle1: isp_cfg_idle1 {
+			isp_cfg_idle1: isp-cfg-idle1-pins {
 				pinctrl-single,pins = <
 					0x34   0x0	/* ISP_SHUTTER0 (IOCFG013) */
 					0x38   0x0	/* ISP_SHUTTER1 (IOCFG014) */
@@ -413,7 +413,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			isp_cfg_func2: isp_cfg_func2 {
+			isp_cfg_func2: isp-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0x54   0x0	/* ISP_STROBE1  (IOCFG021) */
 				>;
@@ -422,7 +422,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			codec_clk_cfg_func: codec_clk_cfg_func {
+			codec_clk_cfg_func: codec-clk-cfg-pins {
 				pinctrl-single,pins = <
 					0x70   0x0	/* CODEC_CLK    (IOCFG028) */
 				>;
@@ -430,7 +430,7 @@
 				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
 				pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
 			};
-			codec_clk_cfg_idle: codec_clk_cfg_idle {
+			codec_clk_cfg_idle: codec-clk-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x70   0x0	/* CODEC_CLK    (IOCFG028) */
 				>;
@@ -439,7 +439,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			codec_cfg_func1: codec_cfg_func1 {
+			codec_cfg_func1: codec-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0x74   0x0	/* DMIC_CLK     (IOCFG029) */
 				>;
@@ -448,7 +448,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			codec_cfg_func2: codec_cfg_func2 {
+			codec_cfg_func2: codec-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0x78   0x0	/* CODEC_SYNC   (IOCFG030) */
 					0x7c   0x0	/* CODEC_DI     (IOCFG031) */
@@ -458,7 +458,7 @@
 				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
 				pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
 			};
-			codec_cfg_idle2: codec_cfg_idle2 {
+			codec_cfg_idle2: codec-cfg-idle2-pins {
 				pinctrl-single,pins = <
 					0x78   0x0	/* CODEC_SYNC   (IOCFG030) */
 					0x7c   0x0	/* CODEC_DI     (IOCFG031) */
@@ -469,7 +469,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			fm_cfg_func: fm_cfg_func {
+			fm_cfg_func: fm-cfg-pins {
 				pinctrl-single,pins = <
 					0x84   0x0	/* FM_XCLK      (IOCFG033) */
 					0x88   0x0	/* FM_XFS       (IOCFG034) */
@@ -481,7 +481,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			bt_cfg_func: bt_cfg_func {
+			bt_cfg_func: bt-cfg-pins {
 				pinctrl-single,pins = <
 					0x94   0x0	/* BT_XCLK      (IOCFG037) */
 					0x98   0x0	/* BT_XFS       (IOCFG038) */
@@ -492,7 +492,7 @@
 				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
-			bt_cfg_idle: bt_cfg_idle {
+			bt_cfg_idle: bt-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x94   0x0	/* BT_XCLK      (IOCFG037) */
 					0x98   0x0	/* BT_XFS       (IOCFG038) */
@@ -504,7 +504,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			pwm_in_cfg_func: pwm_in_cfg_func {
+			pwm_in_cfg_func: pwm-in-cfg-pins {
 				pinctrl-single,pins = <
 					0xbc   0x0	/* PWM_IN       (IOCFG047) */
 				>;
@@ -513,7 +513,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			bl_pwm_cfg_func: bl_pwm_cfg_func {
+			bl_pwm_cfg_func: bl-pwm-cfg-pins {
 				pinctrl-single,pins = <
 					0xc0   0x0	/* BL_PWM       (IOCFG048) */
 				>;
@@ -522,7 +522,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			uart0_cfg_func1: uart0_cfg_func1 {
+			uart0_cfg_func1: uart0-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0xc4   0x0	/* UART0_RXD    (IOCFG049) */
 				>;
@@ -531,7 +531,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			uart0_cfg_func2: uart0_cfg_func2 {
+			uart0_cfg_func2: uart0-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0xc8   0x0	/* UART0_TXD    (IOCFG050) */
 				>;
@@ -540,7 +540,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
 			};
 
-			uart1_cfg_func1: uart1_cfg_func1 {
+			uart1_cfg_func1: uart1-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0xcc   0x0	/* UART1_CTS_N  (IOCFG051) */
 					0xd4   0x0	/* UART1_RXD    (IOCFG053) */
@@ -550,7 +550,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			uart1_cfg_func2: uart1_cfg_func2 {
+			uart1_cfg_func2: uart1-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0xd0   0x0	/* UART1_RTS_N  (IOCFG052) */
 					0xd8   0x0	/* UART1_TXD    (IOCFG054) */
@@ -560,7 +560,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			uart2_cfg_func: uart2_cfg_func {
+			uart2_cfg_func: uart2-cfg-pins {
 				pinctrl-single,pins = <
 					0xdc   0x0	/* UART2_CTS_N  (IOCFG055) */
 					0xe0   0x0	/* UART2_RTS_N  (IOCFG056) */
@@ -572,7 +572,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			uart3_cfg_func: uart3_cfg_func {
+			uart3_cfg_func: uart3-cfg-pins {
 				pinctrl-single,pins = <
 					0x190  0x0	/* UART3_CTS_N  (IOCFG100) */
 					0x194  0x0	/* UART3_RTS_N  (IOCFG101) */
@@ -584,7 +584,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			uart4_cfg_func: uart4_cfg_func {
+			uart4_cfg_func: uart4-cfg-pins {
 				pinctrl-single,pins = <
 					0x1e0  0x0	/* UART4_CTS_N  (IOCFG120) */
 					0x1e4  0x0	/* UART4_RTS_N  (IOCFG121) */
@@ -596,7 +596,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			uart5_cfg_func: uart5_cfg_func {
+			uart5_cfg_func: uart5-cfg-pins {
 				pinctrl-single,pins = <
 					0x1d8  0x0	/* UART4_RXD    (IOCFG118) */
 					0x1dc  0x0	/* UART4_TXD    (IOCFG119) */
@@ -606,7 +606,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			i2c0_cfg_func: i2c0_cfg_func {
+			i2c0_cfg_func: i2c0-cfg-pins {
 				pinctrl-single,pins = <
 					0xec   0x0	/* I2C0_SCL     (IOCFG059) */
 					0xf0   0x0	/* I2C0_SDA     (IOCFG060) */
@@ -616,7 +616,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			i2c1_cfg_func: i2c1_cfg_func {
+			i2c1_cfg_func: i2c1-cfg-pins {
 				pinctrl-single,pins = <
 					0xf4   0x0	/* I2C1_SCL     (IOCFG061) */
 					0xf8   0x0	/* I2C1_SDA     (IOCFG062) */
@@ -626,7 +626,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			i2c2_cfg_func: i2c2_cfg_func {
+			i2c2_cfg_func: i2c2-cfg-pins {
 				pinctrl-single,pins = <
 					0xfc   0x0	/* I2C2_SCL     (IOCFG063) */
 					0x100  0x0	/* I2C2_SDA     (IOCFG064) */
@@ -636,7 +636,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			spi0_cfg_func: spi0_cfg_func {
+			spi0_cfg_func: spi0-cfg-pins {
 				pinctrl-single,pins = <
 					0x1b0  0x0	/* SPI0_DI	(IOCFG108) */
 					0x1b4  0x0	/* SPI0_DO	(IOCFG109) */
@@ -656,7 +656,7 @@
 				&rstout_n_cfg_func
 				>;
 
-			rstout_n_cfg_func: rstout_n_cfg_func {
+			rstout_n_cfg_func: rstout-n-cfg-pins {
 				pinctrl-single,pins = <
 					0x0    0x0	/* RSTOUT_N     (IOCFG000) */
 				>;
@@ -665,7 +665,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			pmu_peri_en_cfg_func: pmu_peri_en_cfg_func {
+			pmu_peri_en_cfg_func: pmu-peri-en-cfg-pins {
 				pinctrl-single,pins = <
 					0x4    0x0	/* PMU_PERI_EN  (IOCFG001) */
 				>;
@@ -674,7 +674,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			sysclk0_en_cfg_func: sysclk0_en_cfg_func {
+			sysclk0_en_cfg_func: sysclk0-en-cfg-pins {
 				pinctrl-single,pins = <
 					0x8    0x0	/* SYSCLK0_EN   (IOCFG002) */
 				>;
@@ -683,7 +683,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
 			};
 
-			jtag_tdo_cfg_func: jtag_tdo_cfg_func {
+			jtag_tdo_cfg_func: jtag-tdo-cfg-pins {
 				pinctrl-single,pins = <
 					0xc    0x0	/* JTAG_TDO     (IOCFG003) */
 				>;
@@ -692,7 +692,7 @@
 				pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>;
 			};
 
-			rf_reset_cfg_func: rf_reset_cfg_func {
+			rf_reset_cfg_func: rf-reset-cfg-pins {
 				pinctrl-single,pins = <
 					0x70   0x0	/* RF_RESET0    (IOCFG028) */
 					0x74   0x0	/* RF_RESET1    (IOCFG029) */
diff --git a/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi
index 920a3111c66d..b801a48041f9 100644
--- a/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi
@@ -25,7 +25,7 @@
 				&range 0 7 0
 				&range 8 116 0>;
 
-			pmu_pmx_func: pmu_pmx_func {
+			pmu_pmx_func: pmu-pins {
 				pinctrl-single,pins = <
 					0x008 MUX_M1 /* PMU1_SSI */
 					0x00c MUX_M1 /* PMU2_SSI */
@@ -34,19 +34,19 @@
 				>;
 			};
 
-			csi0_pwd_n_pmx_func: csi0_pwd_n_pmx_func {
+			csi0_pwd_n_pmx_func: csi0-pwd-n-pins {
 				pinctrl-single,pins = <
 					0x044 MUX_M0 /* CSI0_PWD_N */
 				>;
 			};
 
-			csi1_pwd_n_pmx_func: csi1_pwd_n_pmx_func {
+			csi1_pwd_n_pmx_func: csi1-pwd-n-pins {
 				pinctrl-single,pins = <
 					0x04c MUX_M0 /* CSI1_PWD_N */
 				>;
 			};
 
-			isp0_pmx_func: isp0_pmx_func {
+			isp0_pmx_func: isp0-pins {
 				pinctrl-single,pins = <
 					0x058 MUX_M1 /* ISP_CLK0 */
 					0x064 MUX_M1 /* ISP_SCL0 */
@@ -54,7 +54,7 @@
 				>;
 			};
 
-			isp1_pmx_func: isp1_pmx_func {
+			isp1_pmx_func: isp1-pins {
 				pinctrl-single,pins = <
 					0x05c MUX_M1 /* ISP_CLK1 */
 					0x06c MUX_M1 /* ISP_SCL1 */
@@ -62,47 +62,47 @@
 				>;
 			};
 
-			pwr_key_pmx_func: pwr_key_pmx_func {
+			pwr_key_pmx_func: pwr-key-pins {
 				pinctrl-single,pins = <
 					0x080 MUX_M0 /* GPIO_034 */
 				>;
 			};
 
-			i2c3_pmx_func: i2c3_pmx_func {
+			i2c3_pmx_func: i2c3-pins {
 				pinctrl-single,pins = <
 					0x02c MUX_M1 /* I2C3_SCL */
 					0x030 MUX_M1 /* I2C3_SDA */
 				>;
 			};
 
-			i2c4_pmx_func: i2c4_pmx_func {
+			i2c4_pmx_func: i2c4-pins {
 				pinctrl-single,pins = <
 					0x090 MUX_M1 /* I2C4_SCL */
 					0x094 MUX_M1 /* I2C4_SDA */
 				>;
 			};
 
-			pcie_perstn_pmx_func: pcie_perstn_pmx_func {
+			pcie_perstn_pmx_func: pcie-perstn-pins {
 				pinctrl-single,pins = <
 					0x15c MUX_M1 /* PCIE_PERST_N */
 				>;
 			};
 
-			usbhub5734_pmx_func: usbhub5734_pmx_func {
+			usbhub5734_pmx_func: usbhub5734-pins {
 				pinctrl-single,pins = <
 					0x11c MUX_M0 /* GPIO_073 */
 					0x120 MUX_M0 /* GPIO_074 */
 				>;
 			};
 
-			uart0_pmx_func: uart0_pmx_func {
+			uart0_pmx_func: uart0-pins {
 				pinctrl-single,pins = <
 					0x0cc MUX_M2 /* UART0_RXD */
 					0x0d0 MUX_M2 /* UART0_TXD */
 				>;
 			};
 
-			uart1_pmx_func: uart1_pmx_func {
+			uart1_pmx_func: uart1-pins {
 				pinctrl-single,pins = <
 					0x0b0 MUX_M2 /* UART1_CTS_N */
 					0x0b4 MUX_M2 /* UART1_RTS_N */
@@ -111,7 +111,7 @@
 				>;
 			};
 
-			uart2_pmx_func: uart2_pmx_func {
+			uart2_pmx_func: uart2-pins {
 				pinctrl-single,pins = <
 					0x0bc MUX_M2 /* UART2_CTS_N */
 					0x0c0 MUX_M2 /* UART2_RTS_N */
@@ -120,7 +120,7 @@
 				>;
 			};
 
-			uart3_pmx_func: uart3_pmx_func {
+			uart3_pmx_func: uart3-pins {
 				pinctrl-single,pins = <
 					0x0dc MUX_M1 /* UART3_CTS_N */
 					0x0e0 MUX_M1 /* UART3_RTS_N */
@@ -129,7 +129,7 @@
 				>;
 			};
 
-			uart4_pmx_func: uart4_pmx_func {
+			uart4_pmx_func: uart4-pins {
 				pinctrl-single,pins = <
 					0x0ec MUX_M1 /* UART4_CTS_N */
 					0x0f0 MUX_M1 /* UART4_RTS_N */
@@ -138,7 +138,7 @@
 				>;
 			};
 
-			uart5_pmx_func: uart5_pmx_func {
+			uart5_pmx_func: uart5-pins {
 				pinctrl-single,pins = <
 					0x0c4 MUX_M3 /* UART5_CTS_N */
 					0x0c8 MUX_M3 /* UART5_RTS_N */
@@ -147,7 +147,7 @@
 				>;
 			};
 
-			uart6_pmx_func: uart6_pmx_func {
+			uart6_pmx_func: uart6-pins {
 				pinctrl-single,pins = <
 					0x0cc MUX_M1 /* UART6_CTS_N */
 					0x0d0 MUX_M1 /* UART6_RTS_N */
@@ -156,13 +156,13 @@
 				>;
 			};
 
-			cam0_rst_pmx_func: cam0_rst_pmx_func {
+			cam0_rst_pmx_func: cam0-rst-pins {
 				pinctrl-single,pins = <
 					0x0c8 MUX_M0 /* CAM0_RST */
 				>;
 			};
 
-			cam1_rst_pmx_func: cam1_rst_pmx_func {
+			cam1_rst_pmx_func: cam1-rst-pins {
 				pinctrl-single,pins = <
 					0x124 MUX_M0 /* CAM1_RST */
 				>;
@@ -180,7 +180,7 @@
 			/* pin base, nr pins & gpio function */
 			pinctrl-single,gpio-range = <&range 0 6 0>;
 
-			sd_pmx_func: sd_pmx_func {
+			sd_pmx_func: sd-pins {
 				pinctrl-single,pins = <
 					0x000 MUX_M1 /* SD_CLK */
 					0x004 MUX_M1 /* SD_CMD */
@@ -203,14 +203,14 @@
 			/* pin base, nr pins & gpio function */
 			pinctrl-single,gpio-range = <&range 0 12 0>;
 
-			ufs_pmx_func: ufs_pmx_func {
+			ufs_pmx_func: ufs-pins {
 				pinctrl-single,pins = <
 					0x000 MUX_M1 /* UFS_REF_CLK */
 					0x004 MUX_M1 /* UFS_RST_N */
 				>;
 			};
 
-			spi3_pmx_func: spi3_pmx_func {
+			spi3_pmx_func: spi3-pins {
 				pinctrl-single,pins = <
 					0x008 MUX_M1 /* SPI3_CLK */
 					0x00c MUX_M1 /* SPI3_DI */
@@ -231,7 +231,7 @@
 			/* pin base, nr pins & gpio function */
 			pinctrl-single,gpio-range = <&range 0 6 0>;
 
-			sdio_pmx_func: sdio_pmx_func {
+			sdio_pmx_func: sdio-pins {
 				pinctrl-single,pins = <
 					0x000 MUX_M1 /* SDIO_CLK */
 					0x004 MUX_M1 /* SDIO_CMD */
@@ -254,7 +254,7 @@
 			/* pin base in node, nr pins & gpio function */
 			pinctrl-single,gpio-range = <&range 0 42 0>;
 
-			i2s2_pmx_func: i2s2_pmx_func {
+			i2s2_pmx_func: i2s2-pins {
 				pinctrl-single,pins = <
 					0x044 MUX_M1 /* I2S2_DI */
 					0x048 MUX_M1 /* I2S2_DO */
@@ -263,42 +263,42 @@
 				>;
 			};
 
-			slimbus_pmx_func: slimbus_pmx_func {
+			slimbus_pmx_func: slimbus-pins {
 				pinctrl-single,pins = <
 					0x02c MUX_M1 /* SLIMBUS_CLK */
 					0x030 MUX_M1 /* SLIMBUS_DATA */
 				>;
 			};
 
-			i2c0_pmx_func: i2c0_pmx_func {
+			i2c0_pmx_func: i2c0-pins {
 				pinctrl-single,pins = <
 					0x014 MUX_M1 /* I2C0_SCL */
 					0x018 MUX_M1 /* I2C0_SDA */
 				>;
 			};
 
-			i2c1_pmx_func: i2c1_pmx_func {
+			i2c1_pmx_func: i2c1-pins {
 				pinctrl-single,pins = <
 					0x01c MUX_M1 /* I2C1_SCL */
 					0x020 MUX_M1 /* I2C1_SDA */
 				>;
 			};
 
-			i2c7_pmx_func: i2c7_pmx_func {
+			i2c7_pmx_func: i2c7-pins {
 				pinctrl-single,pins = <
 					0x024 MUX_M3 /* I2C7_SCL */
 					0x028 MUX_M3 /* I2C7_SDA */
 				>;
 			};
 
-			pcie_pmx_func: pcie_pmx_func {
+			pcie_pmx_func: pcie-pins {
 				pinctrl-single,pins = <
 					0x084 MUX_M1 /* PCIE_CLKREQ_N */
 					0x088 MUX_M1 /* PCIE_WAKE_N */
 				>;
 			};
 
-			spi2_pmx_func: spi2_pmx_func {
+			spi2_pmx_func: spi2-pins {
 				pinctrl-single,pins = <
 					0x08c MUX_M1 /* SPI2_CLK */
 					0x090 MUX_M1 /* SPI2_DI */
@@ -307,7 +307,7 @@
 				>;
 			};
 
-			i2s0_pmx_func: i2s0_pmx_func {
+			i2s0_pmx_func: i2s0-pins {
 				pinctrl-single,pins = <
 					0x034 MUX_M1 /* I2S0_DI */
 					0x038 MUX_M1 /* I2S0_DO */
@@ -323,7 +323,7 @@
 			#pinctrl-cells = <1>;
 			pinctrl-single,register-width = <0x20>;
 
-			pmu_cfg_func: pmu_cfg_func {
+			pmu_cfg_func: pmu-cfg-pins {
 				pinctrl-single,pins = <
 					0x010 0x0 /* PMU1_SSI */
 					0x014 0x0 /* PMU2_SSI */
@@ -347,7 +347,7 @@
 				>;
 			};
 
-			i2c3_cfg_func: i2c3_cfg_func {
+			i2c3_cfg_func: i2c3-cfg-pins {
 				pinctrl-single,pins = <
 					0x038 0x0 /* I2C3_SCL */
 					0x03c 0x0 /* I2C3_SDA */
@@ -369,7 +369,7 @@
 				>;
 			};
 
-			csi0_pwd_n_cfg_func: csi0_pwd_n_cfg_func {
+			csi0_pwd_n_cfg_func: csi0-pwd-n-cfg-pins {
 				pinctrl-single,pins = <
 					0x050 0x0 /* CSI0_PWD_N */
 				>;
@@ -390,7 +390,7 @@
 				>;
 			};
 
-			csi1_pwd_n_cfg_func: csi1_pwd_n_cfg_func {
+			csi1_pwd_n_cfg_func: csi1-pwd-n-cfg-pins {
 				pinctrl-single,pins = <
 					0x058 0x0 /* CSI1_PWD_N */
 				>;
@@ -411,7 +411,7 @@
 				>;
 			};
 
-			isp0_cfg_func: isp0_cfg_func {
+			isp0_cfg_func: isp0-cfg-pins {
 				pinctrl-single,pins = <
 					0x064 0x0 /* ISP_CLK0 */
 					0x070 0x0 /* ISP_SCL0 */
@@ -433,7 +433,7 @@
 					DRIVE7_04MA DRIVE6_MASK>;
 			};
 
-			isp1_cfg_func: isp1_cfg_func {
+			isp1_cfg_func: isp1-cfg-pins {
 				pinctrl-single,pins = <
 					0x068 0x0 /* ISP_CLK1 */
 					0x078 0x0 /* ISP_SCL1 */
@@ -456,7 +456,7 @@
 				>;
 			};
 
-			pwr_key_cfg_func: pwr_key_cfg_func {
+			pwr_key_cfg_func: pwr-key-cfg-pins {
 				pinctrl-single,pins = <
 					0x08c 0x0 /* GPIO_034 */
 				>;
@@ -477,7 +477,7 @@
 				>;
 			};
 
-			uart1_cfg_func: uart1_cfg_func {
+			uart1_cfg_func: uart1-cfg-pins {
 				pinctrl-single,pins = <
 					0x0b4 0x0 /* UART1_RXD */
 					0x0b8 0x0 /* UART1_TXD */
@@ -501,7 +501,7 @@
 				>;
 			};
 
-			uart2_cfg_func: uart2_cfg_func {
+			uart2_cfg_func: uart2-cfg-pins {
 				pinctrl-single,pins = <
 					0x0c8 0x0 /* UART2_CTS_N */
 					0x0cc 0x0 /* UART2_RTS_N */
@@ -525,7 +525,7 @@
 				>;
 			};
 
-			uart5_cfg_func: uart5_cfg_func {
+			uart5_cfg_func: uart5-cfg-pins {
 				pinctrl-single,pins = <
 					0x0c8 0x0 /* UART5_RXD */
 					0x0cc 0x0 /* UART5_TXD */
@@ -549,7 +549,7 @@
 				>;
 			};
 
-			cam0_rst_cfg_func: cam0_rst_cfg_func {
+			cam0_rst_cfg_func: cam0-rst-cfg-pins {
 				pinctrl-single,pins = <
 					0x0d4 0x0 /* CAM0_RST */
 				>;
@@ -570,7 +570,7 @@
 				>;
 			};
 
-			uart0_cfg_func: uart0_cfg_func {
+			uart0_cfg_func: uart0-cfg-pins {
 				pinctrl-single,pins = <
 					0x0d8 0x0 /* UART0_RXD */
 					0x0dc 0x0 /* UART0_TXD */
@@ -592,7 +592,7 @@
 				>;
 			};
 
-			uart6_cfg_func: uart6_cfg_func {
+			uart6_cfg_func: uart6-cfg-pins {
 				pinctrl-single,pins = <
 					0x0d8 0x0 /* UART6_CTS_N */
 					0x0dc 0x0 /* UART6_RTS_N */
@@ -616,7 +616,7 @@
 				>;
 			};
 
-			uart3_cfg_func: uart3_cfg_func {
+			uart3_cfg_func: uart3-cfg-pins {
 				pinctrl-single,pins = <
 					0x0e8 0x0 /* UART3_CTS_N */
 					0x0ec 0x0 /* UART3_RTS_N */
@@ -640,7 +640,7 @@
 				>;
 			};
 
-			uart4_cfg_func: uart4_cfg_func {
+			uart4_cfg_func: uart4-cfg-pins {
 				pinctrl-single,pins = <
 					0x0f8 0x0 /* UART4_CTS_N */
 					0x0fc 0x0 /* UART4_RTS_N */
@@ -664,7 +664,7 @@
 				>;
 			};
 
-			cam1_rst_cfg_func: cam1_rst_cfg_func {
+			cam1_rst_cfg_func: cam1-rst-cfg-pins {
 				pinctrl-single,pins = <
 					0x130 0x0 /* CAM1_RST */
 				>;
@@ -692,7 +692,7 @@
 			#pinctrl-cells = <1>;
 			pinctrl-single,register-width = <0x20>;
 
-			ufs_cfg_func: ufs_cfg_func {
+			ufs_cfg_func: ufs-cfg-pins {
 				pinctrl-single,pins = <
 					0x000 0x0 /* UFS_REF_CLK */
 					0x004 0x0 /* UFS_RST_N */
@@ -714,7 +714,7 @@
 				>;
 			};
 
-			spi3_cfg_func: spi3_cfg_func {
+			spi3_cfg_func: spi3-cfg-pins {
 				pinctrl-single,pins = <
 					0x008 0x0 /* SPI3_CLK */
 					0x00c 0x0 /* SPI3_DI */
@@ -745,7 +745,7 @@
 			#pinctrl-cells = <1>;
 			pinctrl-single,register-width = <0x20>;
 
-			sdio_clk_cfg_func: sdio_clk_cfg_func {
+			sdio_clk_cfg_func: sdio-clk-cfg-pins {
 				pinctrl-single,pins = <
 					0x000 0x0 /* SDIO_CLK */
 				>;
@@ -766,7 +766,7 @@
 				>;
 			};
 
-			sdio_cfg_func: sdio_cfg_func {
+			sdio_cfg_func: sdio-cfg-pins {
 				pinctrl-single,pins = <
 					0x004 0x0 /* SDIO_CMD */
 					0x008 0x0 /* SDIO_DATA0 */
@@ -798,7 +798,7 @@
 			#pinctrl-cells = <1>;
 			pinctrl-single,register-width = <0x20>;
 
-			sd_clk_cfg_func: sd_clk_cfg_func {
+			sd_clk_cfg_func: sd-clk-cfg-pins {
 				pinctrl-single,pins = <
 					0x000 0x0 /* SD_CLK */
 				>;
@@ -820,7 +820,7 @@
 				>;
 			};
 
-			sd_cfg_func: sd_cfg_func {
+			sd_cfg_func: sd-cfg-pins {
 				pinctrl-single,pins = <
 					0x004 0x0 /* SD_CMD */
 					0x008 0x0 /* SD_DATA0 */
@@ -853,7 +853,7 @@
 			#pinctrl-cells = <1>;
 			pinctrl-single,register-width = <0x20>;
 
-			i2c0_cfg_func: i2c0_cfg_func {
+			i2c0_cfg_func: i2c0-cfg-pins {
 				pinctrl-single,pins = <
 					0x01c 0x0 /* I2C0_SCL */
 					0x020 0x0 /* I2C0_SDA */
@@ -875,7 +875,7 @@
 				>;
 			};
 
-			i2c1_cfg_func: i2c1_cfg_func {
+			i2c1_cfg_func: i2c1-cfg-pins {
 				pinctrl-single,pins = <
 					0x024 0x0 /* I2C1_SCL */
 					0x028 0x0 /* I2C1_SDA */
@@ -897,7 +897,7 @@
 				>;
 			};
 
-			i2c7_cfg_func: i2c7_cfg_func {
+			i2c7_cfg_func: i2c7-cfg-pins {
 				pinctrl-single,pins = <
 					0x02c 0x0 /* I2C7_SCL */
 					0x030 0x0 /* I2C7_SDA */
@@ -919,7 +919,7 @@
 				>;
 			};
 
-			slimbus_cfg_func: slimbus_cfg_func {
+			slimbus_cfg_func: slimbus-cfg-pins {
 				pinctrl-single,pins = <
 					0x034 0x0 /* SLIMBUS_CLK */
 					0x038 0x0 /* SLIMBUS_DATA */
@@ -941,7 +941,7 @@
 				>;
 			};
 
-			i2s0_cfg_func: i2s0_cfg_func {
+			i2s0_cfg_func: i2s0-cfg-pins {
 				pinctrl-single,pins = <
 					0x040 0x0 /* I2S0_DI */
 					0x044 0x0 /* I2S0_DO */
@@ -965,7 +965,7 @@
 				>;
 			};
 
-			i2s2_cfg_func: i2s2_cfg_func {
+			i2s2_cfg_func: i2s2-cfg-pins {
 				pinctrl-single,pins = <
 					0x050 0x0 /* I2S2_DI */
 					0x054 0x0 /* I2S2_DO */
@@ -989,7 +989,7 @@
 				>;
 			};
 
-			pcie_cfg_func: pcie_cfg_func {
+			pcie_cfg_func: pcie-cfg-pins {
 				pinctrl-single,pins = <
 					0x094 0x0 /* PCIE_CLKREQ_N */
 					0x098 0x0 /* PCIE_WAKE_N */
@@ -1011,7 +1011,7 @@
 				>;
 			};
 
-			spi2_cfg_func: spi2_cfg_func {
+			spi2_cfg_func: spi2-cfg-pins {
 				pinctrl-single,pins = <
 					0x09c 0x0 /* SPI2_CLK */
 					0x0a0 0x0 /* SPI2_DI */
@@ -1035,7 +1035,7 @@
 				>;
 			};
 
-			usb_cfg_func: usb_cfg_func {
+			usb_cfg_func: usb-cfg-pins {
 				pinctrl-single,pins = <
 					0x0ac 0x0 /* GPIO_219 */
 				>;
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi
index 77bd8c3a8314..8f7bf80e6ece 100644
--- a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi
@@ -21,14 +21,14 @@
 			/* pin base, nr pins & gpio function */
 			pinctrl-single,gpio-range = <&range 0 82 0>;
 
-			uart0_pmx_func: uart0_pmx_func {
+			uart0_pmx_func: uart0-pins {
 				pinctrl-single,pins = <
 					0x054 MUX_M2 /* UART0_RXD */
 					0x058 MUX_M2 /* UART0_TXD */
 				>;
 			};
 
-			uart2_pmx_func: uart2_pmx_func {
+			uart2_pmx_func: uart2-pins {
 				pinctrl-single,pins = <
 					0x700 MUX_M2 /* UART2_CTS_N */
 					0x704 MUX_M2 /* UART2_RTS_N */
@@ -37,7 +37,7 @@
 				>;
 			};
 
-			uart3_pmx_func: uart3_pmx_func {
+			uart3_pmx_func: uart3-pins {
 				pinctrl-single,pins = <
 					0x064 MUX_M1 /* UART3_CTS_N */
 					0x068 MUX_M1 /* UART3_RTS_N */
@@ -46,7 +46,7 @@
 				>;
 			};
 
-			uart4_pmx_func: uart4_pmx_func {
+			uart4_pmx_func: uart4-pins {
 				pinctrl-single,pins = <
 					0x074 MUX_M1 /* UART4_CTS_N */
 					0x078 MUX_M1 /* UART4_RTS_N */
@@ -55,52 +55,52 @@
 				>;
 			};
 
-			uart6_pmx_func: uart6_pmx_func {
+			uart6_pmx_func: uart6-pins {
 				pinctrl-single,pins = <
 					0x05c MUX_M1 /* UART6_RXD */
 					0x060 MUX_M1 /* UART6_TXD */
 				>;
 			};
 
-			i2c3_pmx_func: i2c3_pmx_func {
+			i2c3_pmx_func: i2c3-pins {
 				pinctrl-single,pins = <
 					0x010 MUX_M1 /* I2C3_SCL */
 					0x014 MUX_M1 /* I2C3_SDA */
 				>;
 			};
 
-			i2c4_pmx_func: i2c4_pmx_func {
+			i2c4_pmx_func: i2c4-pins {
 				pinctrl-single,pins = <
 					0x03c MUX_M1 /* I2C4_SCL */
 					0x040 MUX_M1 /* I2C4_SDA */
 				>;
 			};
 
-			cam0_rst_pmx_func: cam0_rst_pmx_func {
+			cam0_rst_pmx_func: cam0-rst-pins {
 				pinctrl-single,pins = <
 					0x714 MUX_M0 /* CAM0_RST */
 				>;
 			};
 
-			cam1_rst_pmx_func: cam1_rst_pmx_func {
+			cam1_rst_pmx_func: cam1-rst-pins {
 				pinctrl-single,pins = <
 					0x048 MUX_M0 /* CAM1_RST */
 				>;
 			};
 
-			cam0_pwd_n_pmx_func: cam0_pwd_n_pmx_func {
+			cam0_pwd_n_pmx_func: cam0-pwd-n-pins {
 				pinctrl-single,pins = <
 					0x098 MUX_M0 /* CAM0_PWD_N */
 				>;
 			};
 
-			cam1_pwd_n_pmx_func: cam1_pwd_n_pmx_func {
+			cam1_pwd_n_pmx_func: cam1-pwd-n-pins {
 				pinctrl-single,pins = <
 					0x044 MUX_M0 /* CAM1_PWD_N */
 				>;
 			};
 
-			isp0_pmx_func: isp0_pmx_func {
+			isp0_pmx_func: isp0-pins {
 				pinctrl-single,pins = <
 					0x018 MUX_M1 /* ISP_CLK0 */
 					0x024 MUX_M1 /* ISP_SCL0 */
@@ -108,7 +108,7 @@
 				>;
 			};
 
-			isp1_pmx_func: isp1_pmx_func {
+			isp1_pmx_func: isp1-pins {
 				pinctrl-single,pins = <
 					0x01c MUX_M1 /* ISP_CLK1 */
 					0x02c MUX_M1 /* ISP_SCL1 */
@@ -127,19 +127,19 @@
 			/* pin base, nr pins & gpio function */
 			pinctrl-single,gpio-range = <&range 0 46 0>;
 
-			pwr_key_pmx_func: pwr_key_pmx_func {
+			pwr_key_pmx_func: pwr-key-pins {
 				pinctrl-single,pins = <
 					0x064 MUX_M0 /* GPIO_203 */
 				>;
 			};
 
-			pd_pmx_func: pd_pmx_func{
+			pd_pmx_func: pd-pins {
 				pinctrl-single,pins = <
 					0x080 MUX_M0 /* GPIO_221 */
 				>;
 			};
 
-			i2s2_pmx_func: i2s2_pmx_func {
+			i2s2_pmx_func: i2s2-pins {
 			    pinctrl-single,pins = <
 					0x050 MUX_M1 /* I2S2_DI */
 					0x054 MUX_M1 /* I2S2_DO */
@@ -148,7 +148,7 @@
 			    >;
 			};
 
-			spi0_pmx_func: spi0_pmx_func {
+			spi0_pmx_func: spi0-pins {
 				pinctrl-single,pins = <
 					0x094 MUX_M1 /* SPI0_CLK */
 					0x098 MUX_M1 /* SPI0_DI */
@@ -157,7 +157,7 @@
 				>;
 			};
 
-			spi2_pmx_func: spi2_pmx_func {
+			spi2_pmx_func: spi2-pins {
 				pinctrl-single,pins = <
 					0x710 MUX_M1 /* SPI2_CLK */
 					0x714 MUX_M1 /* SPI2_DI */
@@ -166,7 +166,7 @@
 				>;
 			};
 
-			spi3_pmx_func: spi3_pmx_func {
+			spi3_pmx_func: spi3-pins {
 				pinctrl-single,pins = <
 					0x72c MUX_M1 /* SPI3_CLK */
 					0x730 MUX_M1 /* SPI3_DI */
@@ -175,37 +175,37 @@
 				>;
 			};
 
-			i2c0_pmx_func: i2c0_pmx_func {
+			i2c0_pmx_func: i2c0-pins {
 				pinctrl-single,pins = <
 					0x020 MUX_M1 /* I2C0_SCL */
 					0x024 MUX_M1 /* I2C0_SDA */
 				>;
 			};
 
-			i2c1_pmx_func: i2c1_pmx_func {
+			i2c1_pmx_func: i2c1-pins {
 				pinctrl-single,pins = <
 					0x028 MUX_M1 /* I2C1_SCL */
 					0x02c MUX_M1 /* I2C1_SDA */
 				>;
 			};
-			i2c2_pmx_func: i2c2_pmx_func {
+			i2c2_pmx_func: i2c2-pins {
 				pinctrl-single,pins = <
 					0x030 MUX_M1 /* I2C2_SCL */
 					0x034 MUX_M1 /* I2C2_SDA */
 				>;
 			};
 
-			pcie_clkreq_pmx_func: pcie_clkreq_pmx_func {
+			pcie_clkreq_pmx_func: pcie-clkreq-pins {
 				pinctrl-single,pins = <
 					0x084 MUX_M1 /* PCIE0_CLKREQ_N */
 				>;
 			};
 
-			gpio185_pmx_func: gpio185_pmx_func {
+			gpio185_pmx_func: gpio185-pins {
 				pinctrl-single,pins = <0x01C    0x1>;
 			};
 
-			gpio185_pmx_idle: gpio185_pmx_idle {
+			gpio185_pmx_idle: gpio185-idle-pins {
 				pinctrl-single,pins = <0x01C    0x0>;
 			};
 		};
@@ -216,7 +216,7 @@
 			#pinctrl-cells = <1>;
 			pinctrl-single,register-width = <0x20>;
 
-			uart0_cfg_func: uart0_cfg_func {
+			uart0_cfg_func: uart0-cfg-pins {
 				pinctrl-single,pins = <
 					0x058 0x0 /* UART0_RXD */
 					0x05c 0x0 /* UART0_TXD */
@@ -238,7 +238,7 @@
 				>;
 			};
 
-			uart2_cfg_func: uart2_cfg_func {
+			uart2_cfg_func: uart2-cfg-pins {
 				pinctrl-single,pins = <
 					0x700 0x0 /* UART2_CTS_N */
 					0x704 0x0 /* UART2_RTS_N */
@@ -262,7 +262,7 @@
 				>;
 			};
 
-			uart3_cfg_func: uart3_cfg_func {
+			uart3_cfg_func: uart3-cfg-pins {
 				pinctrl-single,pins = <
 					0x068 0x0 /* UART3_CTS_N */
 					0x06c 0x0 /* UART3_RTS_N */
@@ -286,7 +286,7 @@
 				>;
 			};
 
-			uart4_cfg_func: uart4_cfg_func {
+			uart4_cfg_func: uart4-cfg-pins {
 				pinctrl-single,pins = <
 					0x078 0x0 /* UART4_CTS_N */
 					0x07c 0x0 /* UART4_RTS_N */
@@ -310,7 +310,7 @@
 				>;
 			};
 
-			uart6_cfg_func: uart6_cfg_func {
+			uart6_cfg_func: uart6-cfg-pins {
 				pinctrl-single,pins = <
 					0x060 0x0 /* UART6_RXD */
 					0x064 0x0 /* UART6_TXD */
@@ -332,7 +332,7 @@
 				>;
 			};
 
-			i2c3_cfg_func: i2c3_cfg_func {
+			i2c3_cfg_func: i2c3-cfg-pins {
 				pinctrl-single,pins = <
 					0x014 0x0 /* I2C3_SCL */
 					0x018 0x0 /* I2C3_SDA */
@@ -354,7 +354,7 @@
 				>;
 			};
 
-			i2c4_cfg_func: i2c4_cfg_func {
+			i2c4_cfg_func: i2c4-cfg-pins {
 				pinctrl-single,pins = <
 					0x040 0x0 /* I2C4_SCL */
 					0x044 0x0 /* I2C4_SDA */
@@ -376,7 +376,7 @@
 				>;
 			};
 
-			cam0_rst_cfg_func: cam0_rst_cfg_func {
+			cam0_rst_cfg_func: cam0-rst-cfg-pins {
 				pinctrl-single,pins = <
 					0x714 0x0 /* CAM0_RST */
 				>;
@@ -397,7 +397,7 @@
 				>;
 			};
 
-			cam1_rst_cfg_func: cam1_rst_cfg_func {
+			cam1_rst_cfg_func: cam1-rst-cfg-pins {
 				pinctrl-single,pins = <
 					0x04C 0x0 /* CAM1_RST */
 				>;
@@ -418,7 +418,7 @@
 				>;
 			};
 
-			cam0_pwd_n_cfg_func: cam0_pwd_n_cfg_func {
+			cam0_pwd_n_cfg_func: cam0-pwd-n-cfg-pins {
 				pinctrl-single,pins = <
 					0x09C 0x0 /* CAM0_PWD_N */
 				>;
@@ -439,7 +439,7 @@
 				>;
 			};
 
-			cam1_pwd_n_cfg_func: cam1_pwd_n_cfg_func {
+			cam1_pwd_n_cfg_func: cam1-pwd-n-cfg-pins {
 				pinctrl-single,pins = <
 					0x048 0x0 /* CAM1_PWD_N */
 				>;
@@ -460,7 +460,7 @@
 				>;
 			};
 
-			isp0_cfg_func: isp0_cfg_func {
+			isp0_cfg_func: isp0-cfg-pins {
 				pinctrl-single,pins = <
 					0x01C 0x0 /* ISP_CLK0 */
 					0x028 0x0 /* ISP_SCL0 */
@@ -483,7 +483,7 @@
 				>;
 			};
 
-			isp1_cfg_func: isp1_cfg_func {
+			isp1_cfg_func: isp1-cfg-pins {
 				pinctrl-single,pins = <
 					0x020 0x0 /* ISP_CLK1 */
 					0x030 0x0 /* ISP_SCL1 */
@@ -517,7 +517,7 @@
 			/* pin base, nr pins & gpio function */
 			pinctrl-single,gpio-range = <&range 0 10 0>;
 
-			sdio_pmx_func: sdio_pmx_func {
+			sdio_pmx_func: sdio-pins {
 				pinctrl-single,pins = <
 					0x000 MUX_M1 /* SDIO_CLK */
 					0x004 MUX_M1 /* SDIO_CMD */
@@ -535,7 +535,7 @@
 			#pinctrl-cells = <1>;
 			pinctrl-single,register-width = <0x20>;
 
-			sdio_clk_cfg_func: sdio_clk_cfg_func {
+			sdio_clk_cfg_func: sdio-clk-cfg-pins {
 				pinctrl-single,pins = <
 					0x000 0x0 /* SDIO_CLK */
 				>;
@@ -556,7 +556,7 @@
 				>;
 			};
 
-			sdio_cfg_func: sdio_cfg_func {
+			sdio_cfg_func: sdio-cfg-pins {
 				pinctrl-single,pins = <
 					0x004 0x0 /* SDIO_CMD */
 					0x008 0x0 /* SDIO_DATA0 */
@@ -592,7 +592,7 @@
 			/* pin base, nr pins & gpio function */
 			pinctrl-single,gpio-range = <&range 0 12 0>;
 
-			sd_pmx_func: sd_pmx_func {
+			sd_pmx_func: sd-pins {
 				pinctrl-single,pins = <
 					0x000 MUX_M1 /* SD_CLK */
 					0x004 MUX_M1 /* SD_CMD */
@@ -610,7 +610,7 @@
 			#pinctrl-cells = <1>;
 			pinctrl-single,register-width = <0x20>;
 
-			sd_clk_cfg_func: sd_clk_cfg_func {
+			sd_clk_cfg_func: sd-clk-cfg-pins {
 				pinctrl-single,pins = <
 					0x000 0x0 /* SD_CLK */
 				>;
@@ -632,7 +632,7 @@
 				>;
 			};
 
-			sd_cfg_func: sd_cfg_func {
+			sd_cfg_func: sd-cfg-pins {
 				pinctrl-single,pins = <
 					0x004 0x0 /* SD_CMD */
 					0x008 0x0 /* SD_DATA0 */
@@ -665,7 +665,7 @@
 			#pinctrl-cells = <1>;
 			pinctrl-single,register-width = <0x20>;
 
-			pwr_key_cfg_func: pwr_key_cfg_func {
+			pwr_key_cfg_func: pwr-key-cfg-pins {
 				pinctrl-single,pins = <
 					0x090 0x0 /* GPIO_203 */
 				>;
@@ -686,7 +686,7 @@
 				>;
 			};
 
-			usb_cfg_func: usb_cfg_func {
+			usb_cfg_func: usb-cfg-pins {
 				pinctrl-single,pins = <
 					0x0AC 0x0 /* GPIO_221 */
 				>;
@@ -707,7 +707,7 @@
 				>;
 			};
 
-			spi0_cfg_func: spi0_cfg_func {
+			spi0_cfg_func: spi0-cfg-pins {
 				pinctrl-single,pins = <
 					0x0c8 0x0 /* SPI0_DI */
 					0x0cc 0x0 /* SPI0_DO */
@@ -730,7 +730,7 @@
 				>;
 			};
 
-			spi2_cfg_func: spi2_cfg_func {
+			spi2_cfg_func: spi2-cfg-pins {
 				pinctrl-single,pins = <
 					0x714 0x0 /* SPI2_DI */
 					0x718 0x0 /* SPI2_DO */
@@ -753,7 +753,7 @@
 				>;
 			};
 
-			spi3_cfg_func: spi3_cfg_func {
+			spi3_cfg_func: spi3-cfg-pins {
 				pinctrl-single,pins = <
 					0x730 0x0 /* SPI3_DI */
 					0x734 0x0 /* SPI3_DO */
@@ -776,7 +776,7 @@
 				>;
 			};
 
-			spi0_clk_cfg_func: spi0_clk_cfg_func {
+			spi0_clk_cfg_func: spi0-clk-cfg-pins {
 				pinctrl-single,pins = <
 					0x0c4 0x0 /* SPI0_CLK */
 				>;
@@ -797,7 +797,7 @@
 				>;
 			};
 
-			spi2_clk_cfg_func: spi2_clk_cfg_func {
+			spi2_clk_cfg_func: spi2-clk-cfg-pins {
 				pinctrl-single,pins = <
 					0x710 0x0 /* SPI2_CLK */
 				>;
@@ -818,7 +818,7 @@
 				>;
 			};
 
-			spi3_clk_cfg_func: spi3_clk_cfg_func {
+			spi3_clk_cfg_func: spi3-clk-cfg-pins {
 				pinctrl-single,pins = <
 					0x72c 0x0 /* SPI3_CLK */
 				>;
@@ -839,7 +839,7 @@
 				>;
 			};
 
-			i2c0_cfg_func: i2c0_cfg_func {
+			i2c0_cfg_func: i2c0-cfg-pins {
 				pinctrl-single,pins = <
 					0x04c 0x0 /* I2C0_SCL */
 					0x050 0x0 /* I2C0_SDA */
@@ -861,7 +861,7 @@
 				>;
 			};
 
-			i2c1_cfg_func: i2c1_cfg_func {
+			i2c1_cfg_func: i2c1-cfg-pins {
 				pinctrl-single,pins = <
 					0x054 0x0 /* I2C1_SCL */
 					0x058 0x0 /* I2C1_SDA */
@@ -883,7 +883,7 @@
 				>;
 			};
 
-			i2c2_cfg_func: i2c2_cfg_func {
+			i2c2_cfg_func: i2c2-cfg-pins {
 				pinctrl-single,pins = <
 					0x05c 0x0 /* I2C2_SCL */
 					0x060 0x0 /* I2C2_SDA */
@@ -905,7 +905,7 @@
 				>;
 			};
 
-			pcie_clkreq_cfg_func: pcie_clkreq_cfg_func {
+			pcie_clkreq_cfg_func: pcie-clkreq-cfg-pins {
 				pinctrl-single,pins = <
 					0x0b0 0x0
 				>;
@@ -925,7 +925,7 @@
 					DRIVE7_06MA DRIVE6_MASK
 				>;
 			};
-			i2s2_cfg_func: i2s2_cfg_func {
+			i2s2_cfg_func: i2s2-cfg-pins {
 				pinctrl-single,pins = <
 					0x07c 0x0 /* I2S2_DI */
 					0x080 0x0 /* I2S2_DO */
@@ -949,7 +949,7 @@
 				>;
 			};
 
-			gpio185_cfg_func: gpio185_cfg_func {
+			gpio185_cfg_func: gpio185-cfg-pins {
 				pinctrl-single,pins = <0x048  0>;
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
@@ -957,7 +957,7 @@
 				pinctrl-single,slew-rate = <0x0 0x80>;
 			};
 
-			gpio185_cfg_idle: gpio185_cfg_idle {
+			gpio185_cfg_idle: gpio185-cfg-idle-pins {
 				pinctrl-single,pins = <0x048  0>;
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
index 970047f2dabd..299c4ab630e8 100644
--- a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
@@ -10,10 +10,9 @@
 / {
 	spmi: spmi@fff24000 {
 		compatible = "hisilicon,kirin970-spmi-controller";
+		reg = <0x0 0xfff24000 0x0 0x1000>;
 		#address-cells = <2>;
 		#size-cells = <0>;
-		status = "okay";
-		reg = <0x0 0xfff24000 0x0 0x1000>;
 		hisilicon,spmi-channel = <2>;
 
 		pmic: pmic@0 {
@@ -25,9 +24,6 @@
 			gpios = <&gpio28 0 0>;
 
 			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				ldo3: ldo3 { /* HDMI */
 					regulator-name = "ldo3";
 					regulator-min-microvolt = <1500000>;
diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
index c4eaebbb448f..b7792d443189 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
@@ -54,7 +54,7 @@
 	ranges = <0 0 0x0 0x90000000 0x08000000>,
 		 <1 0 0x0 0x98000000 0x08000000>;
 
-	nor-flash@0,0 {
+	nor-flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "numonyx,js28f00a", "cfi-flash";
@@ -75,7 +75,7 @@
 		};
 	};
 
-	cpld@1,0 {
+	cpld@100000000 {
 		compatible = "hisilicon,hip05-cpld";
 		reg = <1 0x0 0x100>;
 	};
diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
index 7b2abd10d3d6..d0912ca5f237 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
@@ -211,18 +211,26 @@
 
 		cluster0_l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster1_l2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster2_l2: l2-cache2 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster3_l2: l2-cache3 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -271,6 +279,12 @@
 		};
 	};
 
+	refclk200mhz: refclk200mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
@@ -290,12 +304,6 @@
 		#size-cells = <2>;
 		ranges;
 
-		refclk200mhz: refclk200mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <200000000>;
-		};
-
 		uart0: serial@80300000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x80300000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
index 2f8b03b0d365..3d7285e6700e 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
@@ -211,18 +211,26 @@
 
 		cluster0_l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster1_l2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster2_l2: l2-cache2 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster3_l2: l2-cache3 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -250,6 +258,48 @@
 		};
 	};
 
+	eth2: ethernet-0 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <0>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth3: ethernet-1 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <1>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth0: ethernet-4 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <4>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth1: ethernet-5 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <5>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	refclk: refclk {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		#clock-cells = <0>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
@@ -366,12 +416,6 @@
 			};
 		};
 
-		refclk: refclk {
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-			#clock-cells = <0>;
-		};
-
 		usb_ohci: usb@a7030000 {
 			compatible = "generic-ohci";
 			reg = <0x0 0xa7030000 0x0 0x10000>;
@@ -428,7 +472,7 @@
 			};
 		};
 
-		dsaf0: dsa@c7000000 {
+		dsaf0: dsa@c5000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "hisilicon,hns-dsaf-v2";
@@ -562,42 +606,6 @@
 			};
 		};
 
-		eth0: ethernet-4{
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <4>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth1: ethernet-5{
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <5>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth2: ethernet-0{
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <0>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth3: ethernet-1{
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <1>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
 		sas0: sas@c3000000 {
 			compatible = "hisilicon,hip06-sas-v2";
 			reg = <0 0xc3000000 0 0x10000>;
@@ -725,7 +733,7 @@
 			status = "disabled";
 		};
 
-		pcie0: pcie@a0090000 {
+		pcie0: pcie@b0000000 {
 			compatible = "hisilicon,hip06-pcie-ecam";
 			reg = <0 0xb0000000 0 0x2000000>,
 			      <0 0xa0090000 0 0x10000>;
diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
index 1a16662f8867..00a6bfa7478c 100644
--- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
@@ -842,66 +842,98 @@
 
 		cluster0_l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster1_l2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster2_l2: l2-cache2 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster3_l2: l2-cache3 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster4_l2: l2-cache4 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster5_l2: l2-cache5 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster6_l2: l2-cache6 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster7_l2: l2-cache7 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster8_l2: l2-cache8 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster9_l2: l2-cache9 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster10_l2: l2-cache10 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster11_l2: l2-cache11 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster12_l2: l2-cache12 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster13_l2: l2-cache13 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster14_l2: l2-cache14 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		cluster15_l2: l2-cache15 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -981,6 +1013,42 @@
 		};
 	};
 
+	eth0: ethernet-0 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <4>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth1: ethernet-1 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <5>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth2: ethernet-2 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <0>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
+	eth3: ethernet-3 {
+		compatible = "hisilicon,hns-nic-v2";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <1>;
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+		dma-coherent;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
@@ -1238,7 +1306,7 @@
 			};
 		};
 
-		uart0: uart@602b0000 {
+		uart0: serial@602b0000 {
 			compatible = "arm,sbsa-uart";
 			reg = <0x0 0x602b0000 0x0 0x1000>;
 			interrupt-parent = <&mbigen_uart>;
@@ -1311,7 +1379,7 @@
 			};
 		};
 
-		dsaf0: dsa@c7000000 {
+		dsaf0: dsa@c5000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "hisilicon,hns-dsaf-v2";
@@ -1451,42 +1519,6 @@
 			};
 		};
 
-		eth0: ethernet@4{
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <4>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth1: ethernet@5{
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <5>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth2: ethernet@0{
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <0>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
-		eth3: ethernet@1{
-			compatible = "hisilicon,hns-nic-v2";
-			ae-handle = <&dsaf0>;
-			port-idx-in-ae = <1>;
-			local-mac-address = [00 00 00 00 00 00];
-			status = "disabled";
-			dma-coherent;
-		};
-
 		infiniband@c4000000 {
 			compatible = "hisilicon,hns-roce-v1";
 			reg = <0x0 0xc4000000 0x0 0x100000>;
@@ -1692,7 +1724,7 @@
 			status = "disabled";
 		};
 
-		p0_pcie2_a: pcie@a00a0000 {
+		p0_pcie2_a: pcie@af800000 {
 			compatible = "hisilicon,hip07-pcie-ecam";
 			reg = <0 0xaf800000 0 0x800000>,
 			      <0 0xa00a0000 0 0x10000>;
@@ -1713,7 +1745,7 @@
 					 0x0 0 0 4 &mbigen_pcie2_a 671 4>;
 			status = "disabled";
 		};
-		p0_sec_a: crypto@d2000000 {
+		p0_sec_a: crypto@d0000000 {
 			compatible = "hisilicon,hip07-sec";
 			reg = <0x0 0xd0000000 0x0 0x10000>,
 			      <0x0 0xd2000000 0x0 0x10000>,
@@ -1754,7 +1786,7 @@
 				     <605 1>, <606 4>,
 				     <607 1>, <608 4>;
 		};
-		p0_sec_b: crypto@8,d2000000 {
+		p0_sec_b: crypto@8d0000000 {
 			compatible = "hisilicon,hip07-sec";
 			reg = <0x8 0xd0000000 0x0 0x10000>,
 			      <0x8 0xd2000000 0x0 0x10000>,
@@ -1795,7 +1827,7 @@
 				     <605 1>, <606 4>,
 				     <607 1>, <608 4>;
 		};
-		p1_sec_a: crypto@400,d2000000 {
+		p1_sec_a: crypto@400d0000000 {
 			compatible = "hisilicon,hip07-sec";
 			reg = <0x400 0xd0000000 0x0 0x10000>,
 			      <0x400 0xd2000000 0x0 0x10000>,
@@ -1836,7 +1868,7 @@
 				     <605 1>, <606 4>,
 				     <607 1>, <608 4>;
 		};
-		p1_sec_b: crypto@408,d2000000 {
+		p1_sec_b: crypto@408d0000000 {
 			compatible = "hisilicon,hip07-sec";
 			reg = <0x408 0xd0000000 0x0 0x10000>,
 			      <0x408 0xd2000000 0x0 0x10000>,
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index c2a723838344..33f6d01266b1 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -2,5 +2,7 @@
 dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
 				socfpga_agilex_socdk.dtb \
 				socfpga_agilex_socdk_nand.dtb \
+				socfpga_agilex5_socdk.dtb \
+				socfpga_agilex5_socdk_nand.dtb \
 				socfpga_n5x_socdk.dtb
 dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
diff --git a/arch/arm64/boot/dts/intel/keembay-soc.dtsi b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
index 781761d2942b..ae00e9e54e82 100644
--- a/arch/arm64/boot/dts/intel/keembay-soc.dtsi
+++ b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
@@ -70,7 +70,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_PPI 0x7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index 7bbec8aafa62..c1e66db0f4c5 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -60,8 +60,27 @@
 		};
 	};
 
+	firmware {
+		svc {
+			compatible = "intel,agilex-svc";
+			method = "smc";
+			memory-region = <&service_reserved>;
+
+			fpga_mgr: fpga-mgr {
+				compatible = "intel,agilex-soc-fpga-mgr";
+			};
+		};
+	};
+
+	fpga-region {
+		compatible = "fpga-region";
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		fpga-mgr = <&fpga_mgr>;
+	};
+
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
@@ -82,26 +101,32 @@
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
+		interrupt-parent = <&intc>;
 		reg = <0x0 0xfffc1000 0x0 0x1000>,
 		      <0x0 0xfffc2000 0x0 0x2000>,
 		      <0x0 0xfffc4000 0x0 0x2000>,
 		      <0x0 0xfffc6000 0x0 0x2000>;
+		/* VGIC maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	clocks {
 		cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
 		};
 
 		cb_intosc_ls_clk: cb-intosc-ls-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
 		};
 
 		f2s_free_clk: f2s-free-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
 		};
 
 		osc1: osc1 {
@@ -130,7 +155,7 @@
 		compatible = "usb-nop-xceiv";
 	};
 
-	soc {
+	soc@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -138,13 +163,6 @@
 		interrupt-parent = <&intc>;
 		ranges = <0 0 0 0xffffffff>;
 
-		base_fpga_region {
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			compatible = "fpga-region";
-			fpga-mgr = <&fpga_mgr>;
-		};
-
 		clkmgr: clock-controller@ffd10000 {
 			compatible = "intel,agilex-clkmgr";
 			reg = <0xffd10000 0x1000>;
@@ -158,7 +176,7 @@
 			interrupt-names = "macirq";
 			mac-address = [00 00 00 00 00 00];
 			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
-			reset-names = "stmmaceth", "stmmaceth-ocp";
+			reset-names = "stmmaceth", "ahb";
 			tx-fifo-depth = <16384>;
 			rx-fifo-depth = <16384>;
 			snps,multicast-filter-bins = <256>;
@@ -176,7 +194,7 @@
 			interrupt-names = "macirq";
 			mac-address = [00 00 00 00 00 00];
 			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
-			reset-names = "stmmaceth", "stmmaceth-ocp";
+			reset-names = "stmmaceth", "ahb";
 			tx-fifo-depth = <16384>;
 			rx-fifo-depth = <16384>;
 			snps,multicast-filter-bins = <256>;
@@ -194,7 +212,7 @@
 			interrupt-names = "macirq";
 			mac-address = [00 00 00 00 00 00];
 			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
-			reset-names = "stmmaceth", "stmmaceth-ocp";
+			reset-names = "stmmaceth", "ahb";
 			tx-fifo-depth = <16384>;
 			rx-fifo-depth = <16384>;
 			snps,multicast-filter-bins = <256>;
@@ -313,6 +331,7 @@
 				 <&clkmgr AGILEX_SDMMC_CLK>;
 			clock-names = "biu", "ciu";
 			iommus = <&smmu 5>;
+			altr,sysmgr-syscon = <&sysmgr 0x28 4>;
 			status = "disabled";
 		};
 
@@ -335,6 +354,9 @@
 		ocram: sram@ffe00000 {
 			compatible = "mmio-sram";
 			reg = <0xffe00000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xffe00000 0x40000>;
 		};
 
 		pdma: dma-controller@ffda0000 {
@@ -356,10 +378,25 @@
 			clock-names = "apb_pclk";
 		};
 
+		pinctrl0: pinctrl@ffd13000 {
+			compatible = "pinctrl-single";
+			#pinctrl-cells = <1>;
+			reg = <0xffd13000 0xa0>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x0000000f>;
+		};
+
+		pinctrl1: pinctrl@ffd13100 {
+			compatible = "pinctrl-single";
+			#pinctrl-cells = <1>;
+			reg = <0xffd13100 0x20>;
+			pinctrl-single,register-width = <32>;
+		};
+
 		rst: rstmgr@ffd11000 {
-			#reset-cells = <1>;
-			compatible = "altr,stratix10-rst-mgr";
+			compatible = "altr,stratix10-rst-mgr", "altr,rst-mgr";
 			reg = <0xffd11000 0x100>;
+			#reset-cells = <1>;
 		};
 
 		smmu: iommu@fa000000 {
@@ -423,6 +460,8 @@
 			reg-io-width = <4>;
 			num-cs = <4>;
 			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			dmas = <&pdma 16>, <&pdma 17>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -437,6 +476,8 @@
 			reg-io-width = <4>;
 			num-cs = <4>;
 			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			dmas = <&pdma 20>, <&pdma 21>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -640,17 +681,5 @@
 
 			status = "disabled";
 		};
-
-		firmware {
-			svc {
-				compatible = "intel,agilex-svc";
-				method = "smc";
-				memory-region = <&service_reserved>;
-
-				fpga_mgr: fpga-mgr {
-					compatible = "intel,agilex-soc-fpga-mgr";
-				};
-			};
-		};
 	};
 };
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
new file mode 100644
index 000000000000..04e99cd7e74b
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
@@ -0,0 +1,826 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023, Intel Corporation
+ */
+
+/dts-v1/;
+#include <dt-bindings/reset/altr,rst-mgr-s10.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/intel,agilex5-clkmgr.h>
+
+/ {
+	compatible = "intel,socfpga-agilex5";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		service_reserved: svcbuffer@0 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x80000000 0x0 0x2000000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a76";
+			reg = <0x200>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a76";
+			reg = <0x300>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	intc: interrupt-controller@1d000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x1d000000 0 0x10000>,
+			<0x0 0x1d060000 0 0x100000>;
+		ranges;
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-controller;
+		#redistributor-regions = <1>;
+		redistributor-stride = <0x0 0x20000>;
+
+		its: msi-controller@1d040000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x0 0x1d040000 0x0 0x20000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	/* Clock tree 5 main sources*/
+	clocks {
+		cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		cb_intosc_ls_clk: cb-intosc-ls-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		f2s_free_clk: f2s-free-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		osc1: osc1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		qspi_clk: qspi-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	usbphy0: usbphy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0xffffffff>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+
+		clkmgr: clock-controller@10d10000 {
+			compatible = "intel,agilex5-clkmgr";
+			reg = <0x10d10000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		i2c0: i2c@10c02800 {
+			compatible = "snps,designware-i2c";
+			reg = <0x10c02800 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C0_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@10c02900 {
+			compatible = "snps,designware-i2c";
+			reg = <0x10c02900 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C1_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@10c02a00 {
+			compatible = "snps,designware-i2c";
+			reg = <0x10c02a00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C2_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@10c02b00 {
+			compatible = "snps,designware-i2c";
+			reg = <0x10c02b00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C3_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@10c02c00 {
+			compatible = "snps,designware-i2c";
+			reg = <0x10c02c00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C4_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i3c0: i3c@10da0000 {
+			compatible = "snps,dw-i3c-master-1.00a";
+			reg = <0x10da0000 0x1000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_L4_MP_CLK>;
+			status = "disabled";
+		};
+
+		i3c1: i3c@10da1000 {
+			compatible = "snps,dw-i3c-master-1.00a";
+			reg = <0x10da1000 0x1000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_L4_MP_CLK>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@10c03200 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x10c03200 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&rst GPIO0_RESET>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio@10c03300 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x10c03300 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&rst GPIO1_RESET>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		nand: nand-controller@10b80000 {
+			compatible = "cdns,hp-nfc";
+			reg = <0x10b80000 0x10000>,
+					<0x10840000 0x10000>;
+			reg-names = "reg", "sdma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_NAND_NF_CLK>;
+			cdns,board-delay-ps = <4830>;
+			status = "disabled";
+		};
+
+		ocram: sram@0 {
+			compatible = "mmio-sram";
+			reg = <0x00000000 0x80000>;
+			ranges = <0 0 0x80000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		dmac0: dma-controller@10db0000 {
+			compatible = "snps,axi-dma-1.01a";
+			reg = <0x10db0000 0x500>;
+			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>,
+				 <&clkmgr AGILEX5_L4_MP_CLK>;
+			clock-names = "core-clk", "cfgr-clk";
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			snps,dma-masters = <1>;
+			snps,data-width = <2>;
+			snps,block-size = <32767 32767 32767 32767>;
+			snps,priority = <0 1 2 3>;
+			snps,axi-max-burst-len = <8>;
+		};
+
+		dmac1: dma-controller@10dc0000 {
+			compatible = "snps,axi-dma-1.01a";
+			reg = <0x10dc0000 0x500>;
+			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>,
+				 <&clkmgr AGILEX5_L4_MP_CLK>;
+			clock-names = "core-clk", "cfgr-clk";
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			snps,dma-masters = <1>;
+			snps,data-width = <2>;
+			snps,block-size = <32767 32767 32767 32767>;
+			snps,priority = <0 1 2 3>;
+			snps,axi-max-burst-len = <8>;
+		};
+
+		rst: rstmgr@10d11000 {
+			compatible = "altr,stratix10-rst-mgr", "altr,rst-mgr";
+			reg = <0x10d11000 0x1000>;
+			#reset-cells = <1>;
+		};
+
+		spi0: spi@10da4000 {
+			compatible = "snps,dw-apb-ssi";
+			reg = <0x10da4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
+			reg-io-width = <4>;
+			num-cs = <4>;
+			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
+			dmas = <&dmac0 16>, <&dmac0 17>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+
+		};
+
+		spi1: spi@10da5000 {
+			compatible = "snps,dw-apb-ssi";
+			reg = <0x10da5000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
+			reg-io-width = <4>;
+			num-cs = <4>;
+			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
+			dmas = <&dmac0 20>, <&dmac0 21>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		sysmgr: sysmgr@10d12000 {
+			compatible = "altr,sys-mgr-s10","altr,sys-mgr";
+			reg = <0x10d12000 0x500>;
+		};
+
+		timer0: timer0@10c03000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0x10c03000 0x100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer1: timer1@10c03100 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0x10c03100 0x100>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer2: timer2@10d00000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0x10d00000 0x100>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer3: timer3@10d00100 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0x10d00100 0x100>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		uart0: serial@10c02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x10c02000 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst UART0_RESET>;
+			status = "disabled";
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+		};
+
+		uart1: serial@10c02100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x10c02100 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst UART1_RESET>;
+			status = "disabled";
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+		};
+
+		usb0: usb@10b00000 {
+			compatible = "snps,dwc2";
+			reg = <0x10b00000 0x40000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
+			reset-names = "dwc2", "dwc2-ecc";
+			clocks = <&clkmgr AGILEX5_USB2OTG_HCLK>;
+			clock-names = "otg";
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@10d00200 {
+			compatible = "snps,dw-wdt";
+			reg = <0x10d00200 0x100>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG0_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@10d00300 {
+			compatible = "snps,dw-wdt";
+			reg = <0x10d00300 0x100>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG1_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog2: watchdog@10d00400 {
+			compatible = "snps,dw-wdt";
+			reg = <0x10d00400 0x100>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG2_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog3: watchdog@10d00500 {
+			compatible = "snps,dw-wdt";
+			reg = <0x10d00500 0x100>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG3_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog4: watchdog@10d00600 {
+			compatible = "snps,dw-wdt";
+			reg = <0x10d00600 0x100>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG4_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		qspi: spi@108d2000 {
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
+			reg = <0x108d2000 0x100>,
+			      <0x10900000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+			status = "disabled";
+		};
+
+		gmac0: ethernet@10810000 {
+			compatible = "altr,socfpga-stmmac-agilex5",
+				     "snps,dwxgmac-2.10";
+			reg = <0x10810000 0x3500>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			clocks = <&clkmgr AGILEX5_EMAC0_CLK>,
+				 <&clkmgr AGILEX5_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			mac-address = [00 00 00 00 00 00];
+			tx-fifo-depth = <32768>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <64>;
+			snps,perfect-filter-entries = <64>;
+			snps,axi-config = <&stmmac_axi_emac0_setup>;
+			snps,mtl-rx-config = <&mtl_rx_emac0_setup>;
+			snps,mtl-tx-config = <&mtl_tx_emac0_setup>;
+			snps,pbl = <32>;
+			snps,tso;
+			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+			snps,clk-csr = <0>;
+			status = "disabled";
+
+			stmmac_axi_emac0_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <31>;
+				snps,rd_osr_lmt = <31>;
+				snps,blen = <0 0 0 32 16 8 4>;
+			};
+
+			mtl_rx_emac0_setup: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				snps,rx-sched-sp;
+				queue0 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue1 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x1>;
+				};
+				queue2 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x2>;
+				};
+				queue3 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x3>;
+				};
+				queue4 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x4>;
+				};
+				queue5 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x5>;
+				};
+				queue6 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x6>;
+				};
+				queue7 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x7>;
+				};
+			};
+
+			mtl_tx_emac0_setup: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+				snps,tx-sched-wrr;
+				queue0 {
+					snps,weight = <0x09>;
+					snps,dcb-algorithm;
+				};
+				queue1 {
+					snps,weight = <0x0A>;
+					snps,dcb-algorithm;
+				};
+				queue2 {
+					snps,weight = <0x0B>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue3 {
+					snps,weight = <0x0C>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue4 {
+					snps,weight = <0x0D>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue5 {
+					snps,weight = <0x0E>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue6 {
+					snps,weight = <0x0F>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue7 {
+					snps,weight = <0x10>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+			};
+		};
+
+		gmac1: ethernet@10820000 {
+			compatible = "altr,socfpga-stmmac-agilex5",
+				     "snps,dwxgmac-2.10";
+			reg = <0x10820000 0x3500>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			clocks = <&clkmgr AGILEX5_EMAC1_CLK>,
+				 <&clkmgr AGILEX5_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			mac-address = [00 00 00 00 00 00];
+			tx-fifo-depth = <32768>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <64>;
+			snps,perfect-filter-entries = <64>;
+			snps,axi-config = <&stmmac_axi_emac1_setup>;
+			snps,mtl-rx-config = <&mtl_rx_emac1_setup>;
+			snps,mtl-tx-config = <&mtl_tx_emac1_setup>;
+			snps,pbl = <32>;
+			snps,tso;
+			altr,sysmgr-syscon = <&sysmgr 0x48 0>;
+			snps,clk-csr = <0>;
+			status = "disabled";
+
+			stmmac_axi_emac1_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <31>;
+				snps,rd_osr_lmt = <31>;
+				snps,blen = <0 0 0 32 16 8 4>;
+			};
+
+			mtl_rx_emac1_setup: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				snps,rx-sched-sp;
+				queue0 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue1 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x1>;
+				};
+				queue2 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x2>;
+				};
+				queue3 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x3>;
+				};
+				queue4 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x4>;
+				};
+				queue5 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x5>;
+				};
+				queue6 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x6>;
+				};
+				queue7 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x7>;
+				};
+			};
+
+			mtl_tx_emac1_setup: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+				snps,tx-sched-wrr;
+				queue0 {
+					snps,weight = <0x09>;
+					snps,dcb-algorithm;
+				};
+				queue1 {
+					snps,weight = <0x0A>;
+					snps,dcb-algorithm;
+				};
+				queue2 {
+					snps,weight = <0x0B>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue3 {
+					snps,weight = <0x0C>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue4 {
+					snps,weight = <0x0D>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue5 {
+					snps,weight = <0x0E>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue6 {
+					snps,weight = <0x0F>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue7 {
+					snps,weight = <0x10>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+			};
+		};
+
+		gmac2: ethernet@10830000 {
+			compatible = "altr,socfpga-stmmac-agilex5",
+				     "snps,dwxgmac-2.10";
+			reg = <0x10830000 0x3500>;
+			interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			clocks = <&clkmgr AGILEX5_EMAC2_CLK>,
+				 <&clkmgr AGILEX5_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			mac-address = [00 00 00 00 00 00];
+			tx-fifo-depth = <32768>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <64>;
+			snps,perfect-filter-entries = <64>;
+			snps,axi-config = <&stmmac_axi_emac2_setup>;
+			snps,mtl-rx-config = <&mtl_rx_emac2_setup>;
+			snps,mtl-tx-config = <&mtl_tx_emac2_setup>;
+			snps,pbl = <32>;
+			snps,tso;
+			altr,sysmgr-syscon = <&sysmgr 0x4c 0>;
+			snps,clk-csr = <0>;
+			status = "disabled";
+
+			stmmac_axi_emac2_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <31>;
+				snps,rd_osr_lmt = <31>;
+				snps,blen = <0 0 0 32 16 8 4>;
+			};
+
+			mtl_rx_emac2_setup: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				snps,rx-sched-sp;
+				queue0 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue1 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x1>;
+				};
+				queue2 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x2>;
+				};
+				queue3 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x3>;
+				};
+				queue4 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x4>;
+				};
+				queue5 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x5>;
+				};
+				queue6 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x6>;
+				};
+				queue7 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x7>;
+				};
+			};
+
+			mtl_tx_emac2_setup: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+				snps,tx-sched-wrr;
+				queue0 {
+					snps,weight = <0x09>;
+					snps,dcb-algorithm;
+				};
+				queue1 {
+					snps,weight = <0x0A>;
+					snps,dcb-algorithm;
+				};
+				queue2 {
+					snps,weight = <0x0B>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue3 {
+					snps,weight = <0x0C>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue4 {
+					snps,weight = <0x0D>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue5 {
+					snps,weight = <0x0E>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue6 {
+					snps,weight = <0x0F>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue7 {
+					snps,weight = <0x10>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
new file mode 100644
index 000000000000..e9776e1cdc9a
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023, Intel Corporation
+ */
+#include "socfpga_agilex5.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex5 SoCDK";
+	compatible = "intel,socfpga-agilex5-socdk", "intel,socfpga-agilex5";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "hps_led0";
+			gpios = <&porta 11 GPIO_ACTIVE_HIGH>;
+		};
+
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&emac2_phy0>;
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		emac2_phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+		cdns,read-delay = <2>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x04200000>;
+			};
+
+			root: partition@4200000 {
+				label = "root";
+				reg = <0x04200000 0x0be00000>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts
new file mode 100644
index 000000000000..38a582ef86b4
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2025, Altera Corporation
+ */
+#include "socfpga_agilex5.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex5 SoCDK NAND daughter board";
+	compatible = "intel,socfpga-agilex5-socdk-nand", "intel,socfpga-agilex5";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led0 {
+			label = "hps_led0";
+			gpios = <&porta 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led1 {
+			label = "hps_led1";
+			gpios = <&porta 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i3c0 {
+	status = "okay";
+};
+
+&i3c1 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		nand-bus-width = <8>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0 0x200000>;
+		};
+		partition@200000 {
+			label = "root";
+			reg = <0x200000 0xffe00000>;
+		};
+	};
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
index 6231a69204b1..d22de06e9839 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
@@ -20,13 +20,13 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory@0 {
+	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the reg */
-		reg = <0 0 0 0>;
+		reg = <0 0x80000000 0 0>;
 	};
 
-	soc {
+	soc@0 {
 		bus@80000000 {
 			compatible = "simple-bus";
 			reg = <0x80000000 0x60000000>,
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
index 26cd3c121757..b31cfa6b802d 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
@@ -37,10 +37,10 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the reg */
-		reg = <0 0 0 0>;
+		reg = <0 0x80000000 0 0>;
 	};
 };
 
@@ -83,6 +83,7 @@
 	cap-sd-highspeed;
 	broken-cd;
 	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
 };
 
 &osc1 {
@@ -105,15 +106,11 @@
 &qspi {
 	status = "okay";
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <2>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
@@ -127,12 +124,12 @@
 
 			qspi_boot: partition@0 {
 				label = "Boot and fpga data";
-				reg = <0x0 0x03FE0000>;
+				reg = <0x0 0x04200000>;
 			};
 
-			qspi_rootfs: partition@3FE0000 {
-				label = "Root Filesystem - JFFS2";
-				reg = <0x03FE0000 0x0C020000>;
+			root: partition@4200000 {
+				label = "Root Filesystem - UBIFS";
+				reg = <0x04200000 0x0BE00000>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
index 51f83f96ec65..0f9020bd0c52 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
@@ -37,10 +37,10 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the reg */
-		reg = <0 0 0 0>;
+		reg = <0 0x80000000 0 0>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
index 62c66e52b656..7952c7f47cc2 100644
--- a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
@@ -19,18 +19,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the reg */
-		reg = <0 0 0 0>;
+		reg = <0 0x80000000 0 0>;
 	};
 
-	soc {
+	soc@0 {
 		sdram_edac: memory-controller@f87f8000 {
 			compatible = "snps,ddrc-3.80a";
 			reg = <0xf87f8000 0x400>;
 			interrupts = <0 175 4>;
-			status = "okay";
 		};
 	};
 };
@@ -74,6 +73,7 @@
 	cap-sd-highspeed;
 	broken-cd;
 	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
 };
 
 &osc1 {
@@ -83,15 +83,11 @@
 &qspi {
 	status = "okay";
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <2>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
@@ -108,7 +104,7 @@
 				reg = <0x0 0x03FE0000>;
 			};
 
-			qspi_rootfs: partition@3FE0000 {
+			qspi_rootfs: partition@3fe0000 {
 				label = "Root Filesystem - JFFS2";
 				reg = <0x03FE0000 0x0C020000>;
 			};
diff --git a/arch/arm64/boot/dts/lg/lg1312-ref.dts b/arch/arm64/boot/dts/lg/lg1312-ref.dts
index 260a2c5b19e5..cdd10f138098 100644
--- a/arch/arm64/boot/dts/lg/lg1312-ref.dts
+++ b/arch/arm64/boot/dts/lg/lg1312-ref.dts
@@ -22,7 +22,7 @@
 		serial2 = &uart2;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x00000000 0x20000000>;
 	};
diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi
index 78ae73d0cf36..e83fdc92621e 100644
--- a/arch/arm64/boot/dts/lg/lg1312.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -5,101 +5,12 @@
  * Copyright (C) 2016, LG Electronics
  */
 
-#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
+#include "lg131x.dtsi"
 
+/ {
 	compatible = "lge,lg1312";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x0>;
-			next-level-cache = <&L2_0>;
-		};
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-		};
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x2>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-		};
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x3>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-		};
-		L2_0: l2-cache0 {
-			compatible = "cache";
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2", "arm,psci";
-		method = "smc";
-		cpu_suspend = <0x84000001>;
-		cpu_off = <0x84000002>;
-		cpu_on = <0x84000003>;
-	};
-
-	gic: interrupt-controller@c0001000 {
-		#interrupt-cells = <3>;
-		compatible = "arm,gic-400";
-		interrupt-controller;
-		reg = <0x0 0xc0001000 0x1000>,
-		      <0x0 0xc0002000 0x2000>,
-		      <0x0 0xc0004000 0x2000>,
-		      <0x0 0xc0006000 0x2000>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>,
-				     <&cpu1>,
-				     <&cpu2>,
-				     <&cpu3>;
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	clk_bus: clk_bus {
-		#clock-cells = <0>;
-
-		compatible = "fixed-clock";
-		clock-frequency = <198000000>;
-		clock-output-names = "BUSCLK";
-	};
 
 	soc {
 		#address-cells = <2>;
@@ -120,234 +31,4 @@
 			mac-address = [ 00 00 00 00 00 00 ];
 		};
 	};
-
-	amba {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		#interrupt-cells = <3>;
-
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		timers: timer@fd100000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x0 0xfd100000 0x1000>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
-			clock-names = "timer0clk", "timer1clk", "apb_pclk";
-		};
-		wdog: watchdog@fd200000 {
-			compatible = "arm,sp805", "arm,primecell";
-			reg = <0x0 0xfd200000 0x1000>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>, <&clk_bus>;
-			clock-names = "wdog_clk", "apb_pclk";
-		};
-		uart0: serial@fe000000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x0 0xfe000000 0x1000>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		uart1: serial@fe100000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x0 0xfe100000 0x1000>;
-			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		uart2: serial@fe200000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x0 0xfe200000 0x1000>;
-			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		spi0: spi@fe800000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x0 0xfe800000 0x1000>;
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		spi1: spi@fe900000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x0 0xfe900000 0x1000>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		dmac0: dma-controller@c1128000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x0 0xc1128000 0x1000>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-		gpio0: gpio@fd400000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd400000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio1: gpio@fd410000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd410000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio2: gpio@fd420000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd420000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio3: gpio@fd430000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd430000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		gpio4: gpio@fd440000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd440000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio5: gpio@fd450000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd450000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio6: gpio@fd460000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd460000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio7: gpio@fd470000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd470000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio8: gpio@fd480000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd480000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio9: gpio@fd490000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd490000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio10: gpio@fd4a0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4a0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio11: gpio@fd4b0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4b0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		gpio12: gpio@fd4c0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4c0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio13: gpio@fd4d0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4d0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio14: gpio@fd4e0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4e0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio15: gpio@fd4f0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4f0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio16: gpio@fd500000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd500000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio17: gpio@fd510000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd510000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-	};
 };
diff --git a/arch/arm64/boot/dts/lg/lg1313-ref.dts b/arch/arm64/boot/dts/lg/lg1313-ref.dts
index e89ae853788a..6ace977ff4cf 100644
--- a/arch/arm64/boot/dts/lg/lg1313-ref.dts
+++ b/arch/arm64/boot/dts/lg/lg1313-ref.dts
@@ -22,7 +22,7 @@
 		serial2 = &uart2;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x00000000 0x20000000>;
 	};
diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi
index 2173316573be..92fa5694cad1 100644
--- a/arch/arm64/boot/dts/lg/lg1313.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -5,101 +5,12 @@
  * Copyright (C) 2016, LG Electronics
  */
 
-#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
+#include "lg131x.dtsi"
 
+/ {
 	compatible = "lge,lg1313";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x0>;
-			next-level-cache = <&L2_0>;
-		};
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-		};
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x2>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-		};
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x3>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-		};
-		L2_0: l2-cache0 {
-			compatible = "cache";
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2", "arm,psci";
-		method = "smc";
-		cpu_suspend = <0x84000001>;
-		cpu_off = <0x84000002>;
-		cpu_on = <0x84000003>;
-	};
-
-	gic: interrupt-controller@c0001000 {
-		#interrupt-cells = <3>;
-		compatible = "arm,gic-400";
-		interrupt-controller;
-		reg = <0x0 0xc0001000 0x1000>,
-		      <0x0 0xc0002000 0x2000>,
-		      <0x0 0xc0004000 0x2000>,
-		      <0x0 0xc0006000 0x2000>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>,
-				     <&cpu1>,
-				     <&cpu2>,
-				     <&cpu3>;
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	clk_bus: clk_bus {
-		#clock-cells = <0>;
-
-		compatible = "fixed-clock";
-		clock-frequency = <198000000>;
-		clock-output-names = "BUSCLK";
-	};
 
 	soc {
 		#address-cells = <2>;
@@ -120,234 +31,4 @@
 			mac-address = [ 00 00 00 00 00 00 ];
 		};
 	};
-
-	amba {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		#interrupt-cells = <3>;
-
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		timers: timer@fd100000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x0 0xfd100000 0x1000>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
-			clock-names = "timer0clk", "timer1clk", "apb_pclk";
-		};
-		wdog: watchdog@fd200000 {
-			compatible = "arm,sp805", "arm,primecell";
-			reg = <0x0 0xfd200000 0x1000>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>, <&clk_bus>;
-			clock-names = "wdog_clk", "apb_pclk";
-		};
-		uart0: serial@fe000000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x0 0xfe000000 0x1000>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		uart1: serial@fe100000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x0 0xfe100000 0x1000>;
-			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		uart2: serial@fe200000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x0 0xfe200000 0x1000>;
-			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		spi0: spi@fe800000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x0 0xfe800000 0x1000>;
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		spi1: spi@fe900000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x0 0xfe900000 0x1000>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		dmac0: dma-controller@c1128000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x0 0xc1128000 0x1000>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-		gpio0: gpio@fd400000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd400000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio1: gpio@fd410000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd410000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio2: gpio@fd420000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd420000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio3: gpio@fd430000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd430000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		gpio4: gpio@fd440000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd440000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio5: gpio@fd450000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd450000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio6: gpio@fd460000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd460000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio7: gpio@fd470000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd470000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio8: gpio@fd480000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd480000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio9: gpio@fd490000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd490000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio10: gpio@fd4a0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4a0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio11: gpio@fd4b0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4b0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		gpio12: gpio@fd4c0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4c0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio13: gpio@fd4d0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4d0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio14: gpio@fd4e0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4e0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio15: gpio@fd4f0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4f0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio16: gpio@fd500000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd500000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio17: gpio@fd510000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd510000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-	};
 };
diff --git a/arch/arm64/boot/dts/lg/lg131x.dtsi b/arch/arm64/boot/dts/lg/lg131x.dtsi
new file mode 100644
index 000000000000..4cb1e4510897
--- /dev/null
+++ b/arch/arm64/boot/dts/lg/lg131x.dtsi
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for lg131x SoCs
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0x84000003>;
+	};
+
+	gic: interrupt-controller@c0001000 {
+		#interrupt-cells = <3>;
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		reg = <0x0 0xc0001000 0x1000>,
+		      <0x0 0xc0002000 0x2000>,
+		      <0x0 0xc0004000 0x2000>,
+		      <0x0 0xc0006000 0x2000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clk_bus: clk_bus {
+		#clock-cells = <0>;
+
+		compatible = "fixed-clock";
+		clock-frequency = <198000000>;
+		clock-output-names = "BUSCLK";
+	};
+
+	amba {
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		timers: timer@fd100000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x0 0xfd100000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+		};
+		wdog: watchdog@fd200000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xfd200000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+		uart0: serial@fe000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe000000 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+		uart1: serial@fe100000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe100000 0x1000>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+		uart2: serial@fe200000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe200000 0x1000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+		spi0: spi@fe800000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe800000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+		spi1: spi@fe900000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe900000 0x1000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+		dmac0: dma-controller@c1128000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xc1128000 0x1000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+		gpio0: gpio@fd400000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd400000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio1: gpio@fd410000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd410000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio2: gpio@fd420000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd420000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio3: gpio@fd430000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd430000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio4: gpio@fd440000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd440000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio5: gpio@fd450000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd450000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio6: gpio@fd460000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd460000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio7: gpio@fd470000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd470000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio8: gpio@fd480000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd480000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio9: gpio@fd490000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd490000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio10: gpio@fd4a0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4a0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio11: gpio@fd4b0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4b0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio12: gpio@fd4c0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4c0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio13: gpio@fd4d0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4d0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio14: gpio@fd4e0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4e0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio15: gpio@fd4f0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4f0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio16: gpio@fd500000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd500000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio17: gpio@fd510000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd510000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index b6d493e34dc5..a774bc74a0a0 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -1,11 +1,14 @@
 # SPDX-License-Identifier: GPL-2.0
 # Mvebu SoC Family
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-atlas-v5.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-gl-mv1000.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
@@ -24,4 +27,11 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db-B.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += ac5x-rd-carrier-cn9131.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-base.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-pro.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9131-cf-solidwan.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9132-clearfog.dtb
+
+subdir-y	+= mmp
diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
index 80b44c7df56a..4878773883c9 100644
--- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -49,6 +49,8 @@
 
 		l2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -66,7 +68,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a55-pmu";
 		interrupts = <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
@@ -75,9 +77,8 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-		dma-ranges;
 
-		internal-regs@7f000000 {
+		bus@7f000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
@@ -95,6 +96,36 @@
 				status = "okay";
 			};
 
+			uart1: serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "disabled";
+			};
+
+			uart2: serial@12200 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12200 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "disabled";
+			};
+
+			uart3: serial@12300 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12300 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "disabled";
+			};
+
 			mdio: mdio@22004 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -103,7 +134,7 @@
 				clocks = <&cnm_clock>;
 			};
 
-			i2c0: i2c@11000{
+			i2c0: i2c@11000 {
 				compatible = "marvell,mv78230-i2c";
 				reg = <0x11000 0x20>;
 				#address-cells = <1>;
@@ -112,17 +143,17 @@
 				clocks = <&cnm_clock>;
 				clock-names = "core";
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency=<100000>;
+				clock-frequency = <100000>;
 
 				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&i2c0_pins>;
 				pinctrl-1 = <&i2c0_gpio>;
-				scl_gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-				sda_gpio = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&gpio0 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				sda-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "disabled";
 			};
 
-			i2c1: i2c@11100{
+			i2c1: i2c@11100 {
 				compatible = "marvell,mv78230-i2c";
 				reg = <0x11100 0x20>;
 				#address-cells = <1>;
@@ -131,13 +162,13 @@
 				clocks = <&cnm_clock>;
 				clock-names = "core";
 				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency=<100000>;
+				clock-frequency = <100000>;
 
 				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&i2c1_pins>;
 				pinctrl-1 = <&i2c1_gpio>;
-				scl_gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>;
-				sda_gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&gpio0 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				sda-gpios = <&gpio0 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "disabled";
 			};
 
@@ -172,6 +203,30 @@
 			};
 		};
 
+		mmc_dma: bus@80500000 {
+				compatible = "simple-bus";
+				ranges;
+				#address-cells = <0x2>;
+				#size-cells = <0x2>;
+				reg = <0x0 0x80500000 0x0 0x100000>;
+				dma-ranges = <0x0 0x0 0x2 0x0 0x0 0x80000000>;
+				dma-coherent;
+
+				sdhci: mmc@805c0000 {
+					compatible = "marvell,ac5-sdhci",
+						     "marvell,armada-ap806-sdhci";
+					reg = <0x0 0x805c0000 0x0 0x1000>;
+					interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&emmc_clock>, <&cnm_clock>;
+					clock-names = "core", "axi";
+					bus-width = <8>;
+					non-removable;
+					mmc-ddr-1_8v;
+					mmc-hs200-1_8v;
+					mmc-hs400-1_8v;
+				};
+		};
+
 		/*
 		 * Dedicated section for devices behind 32bit controllers so we
 		 * can configure specific DMA mapping for them
@@ -265,6 +320,16 @@
 			status = "disabled";
 		};
 
+		nand: nand-controller@805b0000 {
+			compatible = "marvell,ac5-nand-controller";
+			reg = <0x0 0x805b0000 0x0 0x00000054>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&nand_clock>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@80600000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
@@ -287,5 +352,17 @@
 			#clock-cells = <0>;
 			clock-frequency = <200000000>;
 		};
+
+		nand_clock: nand-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+
+		emmc_clock: emmc-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts b/arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts
index f0ebdb84eec9..0c973d7a215a 100644
--- a/arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts
@@ -99,3 +99,7 @@
 		};
 	};
 };
+
+&sdhci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts
new file mode 100644
index 000000000000..2a0b07000089
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the AC5X RD Type 7 Com Express carrier board,
+ * Utilizing the CN913x COM Express CPU module board.
+ * This specific carrier board in this mode of operation (external)
+ * only maintains a PCIe link with the CPU module,
+ * which does not require any special DTS definitions.
+ *
+ * AC5X RD works here in external mode (switch selectable at the back of the
+ * board), and connect via an external cable a kit
+ * which would allow it to use an external CN9131 CPU COM Express module,
+ * mounted on top of an interposer kit.
+ *
+ * So in this case, once the switch is set to external mode as explained above,
+ * the AC5X RD becomes part of the carrier solution.
+ *
+ * When the board boots in the external CPU mode, the internal CPU is disabled,
+ * and only the switch portion of the SOC acts as a PCIe end-point, Hence there
+ * is no need to describe this internal (disabled CPU) in the device tree.
+ *
+ * There is no CPU booting in this mode on the carrier, only on the
+ * CN9131 COM Express CPU module.
+ * What runs the Linux is the CN9131 on the COM Express CPU module,
+ * And it accesses the switch end-point on the AC5X RD portion of the carrier
+ * via PCIe.
+ */
+
+#include "cn9131-db-comexpress.dtsi"
+#include "ac5x-rd-carrier.dtsi"
+
+/ {
+	model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board with CN9131 CPU module";
+	compatible = "marvell,cn9131-ac5x-carrier", "marvell,rd-ac5x-carrier",
+			"marvell,cn9131-cpu-module", "marvell,cn9131",
+			"marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x2 0x00000000>;
+	};
+
+};
diff --git a/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi
new file mode 100644
index 000000000000..f98629abb58b
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the AC5X RD Type 7 Com Express carrier board,
+ * This specific board in external mode (see below) only maintains
+ * a PCIe link with the COM Express CPU module, which does not
+ * require any special DTS definitions.
+ *
+ * AC5X RD can either work as you would expect, as a complete standalone
+ * box using the internal CPU, or you can move the switch on the back of
+ * the box to "external" mode, and connect via an external cable a kit
+ * which would allow it to use an external CPU COM Express module,
+ * mounted on top of an interposer kit.
+ *
+ * So in this case, once the switch is set to external mode as explained above,
+ * the AC5X RD becomes part of the carrier solution.
+ * This is a development/reference solution, not a full commercial solution,
+ * hence it was designed with the flexibility to be configured in different
+ * modes of operation.
+ *
+ * When the board boots in the external CPU mode, the internal CPU is disabled,
+ * and only the switch portion of the SOC acts as a PCIe end-point, Hence there
+ * is no need to describe this internal (disabled CPU) in the device tree.
+ *
+ * There is no CPU booting in this mode on the carrier,
+ * only on the COM Express CPU module.
+ */
+
+/ {
+	model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board";
+	compatible = "marvell,rd-ac5x-carrier";
+
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-371x.dtsi b/arch/arm64/boot/dts/marvell/armada-371x.dtsi
deleted file mode 100644
index dc1182ec9fa1..000000000000
--- a/arch/arm64/boot/dts/marvell/armada-371x.dtsi
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 371x family of SoCs
- * (also named 88F3710)
- *
- * Copyright (C) 2016 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- */
-
-#include "armada-37xx.dtsi"
-
-/ {
-	model = "Marvell Armada 3710 SoC";
-	compatible = "marvell,armada3710", "marvell,armada3700";
-};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts b/arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts
new file mode 100644
index 000000000000..070d10a705bb
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for RIPE Atlas Probe v5
+ * 2025 by Marek Behún <kabel@kernel.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/bus/moxtet.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "RIPE Atlas Probe v5";
+	compatible = "ripe,atlas-v5", "marvell,armada3720",
+		     "marvell,armada3710";
+
+	aliases {
+		ethernet0 = &eth0;
+		mmc0 = &sdhci0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_ACTIVITY;
+			color = <LED_COLOR_ID_RED>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	vsdc_reg: vsdc-reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vsdc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	firmware {
+		armada-3700-rwtm {
+			compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm";
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&sdhci0 {
+	non-removable;
+	bus-width = <4>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	sd-uhs-sdr104;
+	marvell,xenon-emmc;
+	marvell,xenon-tun-count = <9>;
+	marvell,pad-type = "fixed-1-8v";
+	vqmmc-supply = <&vsdc_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc_pins>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmccard: mmccard@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&smi_pins>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
new file mode 100644
index 000000000000..91c2f8b4edfa
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "armada-3720-uDPU.dtsi"
+
+/ {
+	model = "Methode eDPU Board";
+	compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710";
+};
+
+&eth0 {
+	phy-mode = "2500base-x";
+};
+
+/*
+ * External MV88E6361 switch is only available on v2 of the board.
+ * U-Boot will enable the MDIO bus and switch nodes.
+ */
+&mdio {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&smi_pins>;
+
+	/* Actual device is MV88E6361 */
+	switch: switch@0 {
+		compatible = "marvell,mv88e6190";
+		reg = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "cpu";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				ethernet = <&eth0>;
+			};
+
+			port@9 {
+				reg = <9>;
+				label = "downlink";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+			};
+
+			port@a {
+				reg = <10>;
+				label = "uplink";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				sfp = <&sfp_eth1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
index 070725b81be5..97a180c8dcd9 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
@@ -12,8 +12,8 @@
 
 / {
 	model = "Globalscale Marvell ESPRESSOBin Ultra Board";
-	compatible = "globalscale,espressobin-ultra", "marvell,armada3720",
-		     "marvell,armada3710";
+	compatible = "globalscale,espressobin-ultra", "globalscale,espressobin",
+		     "marvell,armada3720", "marvell,armada3710";
 
 	aliases {
 		/* ethernet1 is WAN port */
@@ -24,6 +24,8 @@
 		ethernet5 = &switch0port4;
 	};
 
+	/delete-node/ regulator;
+
 	reg_usb3_vbus: usb3-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3-vbus";
@@ -66,6 +68,7 @@
 };
 
 &sdhci1 {
+	/delete-property/ vqmmc-supply;
 	status = "disabled";
 };
 
@@ -111,54 +114,84 @@
 };
 
 &mdio {
+	/* Switch is @3, not @1 */
+	/delete-node/ ethernet-switch@1;
 	extphy: ethernet-phy@1 {
 		reg = <1>;
 
 		reset-gpios = <&gpionb 2 GPIO_ACTIVE_LOW>;
 	};
-};
 
-&switch0 {
-	reg = <3>;
+	switch0: ethernet-switch@3 {
+		compatible = "marvell,mv88e6085";
+		reg = <3>;
 
-	reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
+		dsa,member = <0 0>;
 
-	ports {
-		switch0port1: port@1 {
-			reg = <1>;
-			label = "lan0";
-			phy-handle = <&switch0phy0>;
-		};
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0port0: ethernet-port@0 {
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
 
-		switch0port2: port@2 {
-			reg = <2>;
-			label = "lan1";
-			phy-handle = <&switch0phy1>;
-		};
+			switch0port1: ethernet-port@1 {
+				reg = <1>;
+				label = "lan0";
+				phy-handle = <&switch0phy0>;
+			};
 
-		switch0port3: port@3 {
-			reg = <3>;
-			label = "lan2";
-			phy-handle = <&switch0phy2>;
-		};
+			switch0port2: ethernet-port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+			};
 
-		switch0port4: port@4 {
-			reg = <4>;
-			label = "lan3";
-			phy-handle = <&switch0phy3>;
-		};
+			switch0port3: ethernet-port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy-handle = <&switch0phy2>;
+			};
 
-		switch0port5: port@5 {
-			reg = <5>;
-			label = "wan";
-			phy-handle = <&extphy>;
-			phy-mode = "sgmii";
+			switch0port4: ethernet-port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			switch0port5: ethernet-port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-handle = <&extphy>;
+				phy-mode = "sgmii";
+			};
 		};
-	};
 
-	mdio {
-		switch0phy3: switch0phy3@14 {
-			reg = <0x14>;
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: ethernet-phy@11 {
+				reg = <0x11>;
+			};
+			switch0phy1: ethernet-phy@12 {
+				reg = <0x12>;
+			};
+			switch0phy2: ethernet-phy@13 {
+				reg = <0x13>;
+			};
+			switch0phy3: ethernet-phy@14 {
+				reg = <0x14>;
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
index 5fc613d24151..fed2dcecb323 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
@@ -13,7 +13,7 @@
 / {
 	aliases {
 		ethernet0 = &eth0;
-		/* for dsa slave device */
+		/* for DSA user port device */
 		ethernet1 = &switch0port1;
 		ethernet2 = &switch0port2;
 		ethernet3 = &switch0port3;
@@ -145,19 +145,17 @@
 };
 
 &mdio {
-	switch0: switch0@1 {
+	switch0: ethernet-switch@1 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <1>;
 
 		dsa,member = <0 0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0port0: port@0 {
+			switch0port0: ethernet-port@0 {
 				reg = <0>;
 				label = "cpu";
 				ethernet = <&eth0>;
@@ -168,19 +166,19 @@
 				};
 			};
 
-			switch0port1: port@1 {
+			switch0port1: ethernet-port@1 {
 				reg = <1>;
 				label = "wan";
 				phy-handle = <&switch0phy0>;
 			};
 
-			switch0port2: port@2 {
+			switch0port2: ethernet-port@2 {
 				reg = <2>;
 				label = "lan0";
 				phy-handle = <&switch0phy1>;
 			};
 
-			switch0port3: port@3 {
+			switch0port3: ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 				phy-handle = <&switch0phy2>;
@@ -192,13 +190,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
new file mode 100644
index 000000000000..9f4bafeddd82
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "GL.iNet GL-MV1000";
+	compatible = "glinet,gl-mv1000", "marvell,armada3720", "marvell,armada3710";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	vcc_sd_reg1: regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios-states = <0>;
+		states = <1800000 0x1
+			3300000 0x0>;
+		enable-active-high;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+		};
+
+		switch {
+			label = "switch";
+			linux,code = <BTN_0>;
+			gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-vpn {
+			label = "green:vpn";
+			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan {
+			label = "green:wan";
+			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power: led-power {
+			label = "green:power";
+			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "firmware";
+				reg = <0 0xf0000>;
+			};
+
+			partition@f0000 {
+				label = "u-boot-env";
+				reg = <0xf0000 0x8000>;
+			};
+
+			factory: partition@f8000 {
+				label = "factory";
+				reg = <0xf8000 0x8000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "dtb";
+				reg = <0x100000 0x10000>;
+				read-only;
+			};
+
+			partition@110000 {
+				label = "rescue";
+				reg = <0x110000 0x1000000>;
+			};
+		};
+	};
+};
+
+&sdhci1 {
+	wp-inverted;
+	bus-width = <4>;
+	cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
+	marvell,pad-type = "sd";
+	no-1-8-v;
+	vqmmc-supply = <&vcc_sd_reg1>;
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	marvell,pad-type = "fixed-1-8v";
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&mdio {
+	switch0: ethernet-switch@1 {
+		compatible = "marvell,mv88e6085";
+		reg = <1>;
+
+		dsa,member = <0 0>;
+
+		ports: ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@0 {
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&eth0>;
+			};
+
+			ethernet-port@1 {
+				reg = <1>;
+				label = "wan";
+				phy-handle = <&switch0phy0>;
+			};
+
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan0";
+				phy-handle = <&switch0phy1>;
+
+				nvmem-cells = <&macaddr_factory_6>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan1";
+				phy-handle = <&switch0phy2>;
+
+				nvmem-cells = <&macaddr_factory_6>;
+				nvmem-cell-names = "mac-address";
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: ethernet-phy@11 {
+				reg = <0x11>;
+			};
+			switch0phy1: ethernet-phy@12 {
+				reg = <0x12>;
+			};
+			switch0phy2: ethernet-phy@13 {
+				reg = <0x13>;
+			};
+		};
+	};
+};
+
+&eth0 {
+	nvmem-cells = <&macaddr_factory_0>;
+	nvmem-cell-names = "mac-address";
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&factory {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_factory_0: macaddr@0 {
+		reg = <0x0 0x6>;
+	};
+
+	macaddr_factory_6: macaddr@6 {
+		reg = <0x6 0x6>;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index ada164d423f3..f4d73c8b1a6d 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -125,9 +125,12 @@
 	/delete-property/ mrvl,i2c-fast-mode;
 	status = "okay";
 
+	/* MCP7940MT-I/MNY RTC */
 	rtc@6f {
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
+		interrupt-parent = <&gpiosb>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO2_5 */
 	};
 };
 
@@ -136,6 +139,7 @@
 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
 	status = "okay";
 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+	slot-power-limit-milliwatt = <10000>;
 	/*
 	 * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property
 	 * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and
@@ -212,8 +216,6 @@
 	assigned-clock-rates = <20000000>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <20000000>;
@@ -300,9 +302,15 @@
 		reg = <1>;
 	};
 
-	/* switch nodes are enabled by U-Boot if modules are present */
+	/*
+	 * NOTE: switch nodes are enabled by U-Boot if modules are present
+	 * DO NOT change this node name (switch0@10) even if it is not following
+	 * conventions! Deployed U-Boot binaries are explicitly looking for
+	 * this node in order to augment the device tree!
+	 * Also do not touch the "ports" or "port@n" nodes. These are also ABI.
+	 */
 	switch0@10 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x10>;
 		dsa,member = <0 0>;
 		interrupt-parent = <&moxtet>;
@@ -313,35 +321,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1: switch0phy1@1 {
+			switch0phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy2: switch0phy2@2 {
+			switch0phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy3: switch0phy3@3 {
+			switch0phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy4: switch0phy4@4 {
+			switch0phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy5: switch0phy5@5 {
+			switch0phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy6: switch0phy6@6 {
+			switch0phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy7: switch0phy7@7 {
+			switch0phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy8: switch0phy8@8 {
+			switch0phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -426,8 +434,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch0@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 0>;
 		interrupt-parent = <&moxtet>;
@@ -438,19 +447,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1_topaz: switch0phy1@11 {
+			switch0phy1_topaz: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch0phy2_topaz: switch0phy2@12 {
+			switch0phy2_topaz: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch0phy3_topaz: switch0phy3@13 {
+			switch0phy3_topaz: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch0phy4_topaz: switch0phy4@14 {
+			switch0phy4_topaz: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
@@ -493,8 +502,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch1@11 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x11>;
 		dsa,member = <0 1>;
 		interrupt-parent = <&moxtet>;
@@ -505,35 +515,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch1phy1: switch1phy1@1 {
+			switch1phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch1phy2: switch1phy2@2 {
+			switch1phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch1phy3: switch1phy3@3 {
+			switch1phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch1phy4: switch1phy4@4 {
+			switch1phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch1phy5: switch1phy5@5 {
+			switch1phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch1phy6: switch1phy6@6 {
+			switch1phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch1phy7: switch1phy7@7 {
+			switch1phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch1phy8: switch1phy8@8 {
+			switch1phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -618,8 +628,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch1@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 1>;
 		interrupt-parent = <&moxtet>;
@@ -630,19 +641,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch1phy1_topaz: switch1phy1@11 {
+			switch1phy1_topaz: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch1phy2_topaz: switch1phy2@12 {
+			switch1phy2_topaz: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch1phy3_topaz: switch1phy3@13 {
+			switch1phy3_topaz: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch1phy4_topaz: switch1phy4@14 {
+			switch1phy4_topaz: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
@@ -685,8 +696,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch2@12 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x12>;
 		dsa,member = <0 2>;
 		interrupt-parent = <&moxtet>;
@@ -697,35 +709,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch2phy1: switch2phy1@1 {
+			switch2phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch2phy2: switch2phy2@2 {
+			switch2phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch2phy3: switch2phy3@3 {
+			switch2phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch2phy4: switch2phy4@4 {
+			switch2phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch2phy5: switch2phy5@5 {
+			switch2phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch2phy6: switch2phy6@6 {
+			switch2phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch2phy7: switch2phy7@7 {
+			switch2phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch2phy8: switch2phy8@8 {
+			switch2phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -801,8 +813,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch2@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 2>;
 		interrupt-parent = <&moxtet>;
@@ -813,19 +826,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch2phy1_topaz: switch2phy1@11 {
+			switch2phy1_topaz: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch2phy2_topaz: switch2phy2@12 {
+			switch2phy2_topaz: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch2phy3_topaz: switch2phy3@13 {
+			switch2phy3_topaz: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch2phy4_topaz: switch2phy4@14 {
+			switch2phy4_topaz: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
index b20c8e7d923b..c76eceabd33e 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -1,66 +1,12 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device tree for the uDPU board.
- * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
- * Copyright (C) 2016 Marvell
- * Copyright (C) 2019 Methode Electronics
- * Copyright (C) 2019 Telus
- *
- * Vladimir Vid <vladimir.vid@sartura.hr>
- */
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-372x.dtsi"
+#include "armada-3720-uDPU.dtsi"
 
 / {
 	model = "Methode uDPU Board";
-	compatible = "methode,udpu", "marvell,armada3720";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		compatible = "gpio-leds";
-
-		power1 {
-			label = "udpu:green:power";
-			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
-		};
-
-		power2 {
-			label = "udpu:red:power";
-			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
-		};
-
-		network1 {
-			label = "udpu:green:network";
-			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
-		};
-
-		network2 {
-			label = "udpu:red:network";
-			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
-		};
-
-		alarm1 {
-			label = "udpu:green:alarm";
-			gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
-		};
-
-		alarm2 {
-			label = "udpu:red:alarm";
-			gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
-		};
-	};
+	compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710";
 
 	sfp_eth0: sfp-eth0 {
 		compatible = "sff,sfp";
@@ -71,55 +17,6 @@
 		tx-fault-gpios = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
 		maximum-power-milliwatt = <3000>;
 	};
-
-	sfp_eth1: sfp-eth1 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		los-gpios = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&gpiosb 8 GPIO_ACTIVE_LOW>;
-		tx-disable-gpios = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpios = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
-		maximum-power-milliwatt = <3000>;
-	};
-};
-
-&sdhci0 {
-	status = "okay";
-	bus-width = <8>;
-	mmc-ddr-1_8v;
-	mmc-hs400-1_8v;
-	marvell,pad-type = "fixed-1-8v";
-	non-removable;
-	no-sd;
-	no-sdio;
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi_quad_pins>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <54000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "firmware";
-				reg = <0x0 0x180000>;
-			};
-
-			partition@180000 {
-				label = "u-boot-env";
-				reg = <0x180000 0x10000>;
-			};
-		};
-	};
 };
 
 &pinctrl_nb {
@@ -127,11 +24,6 @@
 		groups = "i2c1";
 		function = "gpio";
 	};
-
-	i2c2_recovery_pins: i2c2-recovery-pins {
-		groups = "i2c2";
-		function = "gpio";
-	};
 };
 
 &i2c0 {
@@ -144,50 +36,7 @@
 	sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 };
 
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default", "recovery";
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-1 = <&i2c2_recovery_pins>;
-	/delete-property/mrvl,i2c-fast-mode;
-	scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	nct375@48 {
-		status = "okay";
-		compatible = "ti,tmp75c";
-		reg = <0x48>;
-	};
-
-	nct375@49 {
-		status = "okay";
-		compatible = "ti,tmp75c";
-		reg = <0x49>;
-	};
-};
-
 &eth0 {
 	phy-mode = "sgmii";
-	status = "okay";
-	managed = "in-band-status";
-	phys = <&comphy1 0>;
 	sfp = <&sfp_eth0>;
 };
-
-&eth1 {
-	phy-mode = "sgmii";
-	status = "okay";
-	managed = "in-band-status";
-	phys = <&comphy0 1>;
-	sfp = <&sfp_eth1>;
-};
-
-&usb3 {
-	status = "okay";
-	phys = <&usb2_utmi_otg_phy>;
-	phy-names = "usb2-utmi-otg-phy";
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
new file mode 100644
index 000000000000..242820845707
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device tree for the uDPU board.
+ * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
+ * Copyright (C) 2016 Marvell
+ * Copyright (C) 2019 Methode Electronics
+ * Copyright (C) 2019 Telus
+ *
+ * Vladimir Vid <vladimir.vid@sartura.hr>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_quad_pins>;
+
+		led-power1 {
+			label = "udpu:green:power";
+			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power2 {
+			label = "udpu:red:power";
+			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-network1 {
+			label = "udpu:green:network";
+			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-network2 {
+			label = "udpu:red:network";
+			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-alarm1 {
+			label = "udpu:green:alarm";
+			gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-alarm2 {
+			label = "udpu:red:alarm";
+			gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sfp_eth1: sfp-eth1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpios = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&gpiosb 8 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,pad-type = "fixed-1-8v";
+	non-removable;
+	no-sd;
+	no-sdio;
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <54000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x180000>;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x10000>;
+			};
+		};
+	};
+};
+
+&spi_quad_pins {
+	function = "gpio";
+};
+
+&pinctrl_nb {
+	i2c2_recovery_pins: i2c2-recovery-pins {
+		groups = "i2c2";
+		function = "gpio";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default", "recovery";
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-1 = <&i2c2_recovery_pins>;
+	/delete-property/mrvl,i2c-fast-mode;
+	scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	temp-sensor@48 {
+		compatible = "ti,tmp75c";
+		reg = <0x48>;
+	};
+
+	temp-sensor@49 {
+		compatible = "ti,tmp75c";
+		reg = <0x49>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	managed = "in-band-status";
+	phys = <&comphy1 0>;
+};
+
+&eth1 {
+	phy-mode = "sgmii";
+	status = "okay";
+	managed = "in-band-status";
+	phys = <&comphy0 1>;
+	sfp = <&sfp_eth1>;
+};
+
+&usb3 {
+	status = "okay";
+	phys = <&usb2_utmi_otg_phy>;
+	phy-names = "usb2-utmi-otg-phy";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
index 5ce55bdbb995..b99ac4c03a48 100644
--- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
@@ -12,9 +12,6 @@
 #include "armada-37xx.dtsi"
 
 / {
-	model = "Marvell Armada 3720 SoC";
-	compatible = "marvell,armada3720", "marvell,armada3710";
-
 	cpus {
 		cpu1: cpu@1 {
 			device_type = "cpu";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index df152c72276b..c612317043ea 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -11,8 +11,6 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
-	model = "Marvell Armada 37xx SoC";
-	compatible = "marvell,armada3700";
 	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;
@@ -35,6 +33,11 @@
 			reg = <0 0x4000000 0 0x200000>;
 			no-map;
 		};
+
+		tee@4400000 {
+			reg = <0 0x4400000 0 0x1000000>;
+			no-map;
+		};
 	};
 
 	cpus {
@@ -63,7 +66,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
@@ -73,7 +76,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		internal-regs@d0000000 {
+		bus@d0000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
@@ -426,14 +429,14 @@
 			crypto: crypto@90000 {
 				compatible = "inside-secure,safexcel-eip97ies";
 				reg = <0x90000 0x20000>;
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "mem", "ring0", "ring1",
-						  "ring2", "ring3", "eip";
+					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "ring0", "ring1", "ring2",
+						  "ring3", "eip", "mem";
 				clocks = <&nb_periph_clk 15>;
 			};
 
@@ -521,6 +524,7 @@
 			pcie_intc: interrupt-controller {
 				interrupt-controller;
 				#interrupt-cells = <1>;
+				#address-cells = <0>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/marvell/armada-7020.dtsi b/arch/arm64/boot/dts/marvell/armada-7020.dtsi
index 4e46326dd123..570f901b4f4a 100644
--- a/arch/arm64/boot/dts/marvell/armada-7020.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-7020.dtsi
@@ -8,9 +8,3 @@
 
 #include "armada-ap806-dual.dtsi"
 #include "armada-70x0.dtsi"
-
-/ {
-	model = "Marvell Armada 7020";
-	compatible = "marvell,armada7020", "marvell,armada-ap806-dual",
-		     "marvell,armada-ap806";
-};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 5e5baf6beea4..3add6506ff20 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -124,7 +124,6 @@
 
 	expander0: pca9555@21 {
 		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x21>;
@@ -214,7 +213,7 @@
 
 	sata-port@1 {
 		phys = <&cp0_comphy3 1>;
-		phy-names = "cp0-sata0-1-phy";
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
index 7ca71f2d7afb..6bdc4f1e6939 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
@@ -149,7 +149,7 @@
 };
 
 /* SPI-NOR */
-&cp0_spi1{
+&cp0_spi1 {
 	status = "okay";
 
 	pinctrl-names = "default";
@@ -301,10 +301,8 @@
 	};
 
 	/* 88E6141 Topaz switch */
-	switch: switch@3 {
+	switch: ethernet-switch@3 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <3>;
 
 		pinctrl-names = "default";
@@ -314,35 +312,35 @@
 		interrupt-parent = <&cp0_gpio1>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			swport1: port@1 {
+			swport1: ethernet-port@1 {
 				reg = <1>;
 				label = "lan0";
 				phy-handle = <&swphy1>;
 			};
 
-			swport2: port@2 {
+			swport2: ethernet-port@2 {
 				reg = <2>;
 				label = "lan1";
 				phy-handle = <&swphy2>;
 			};
 
-			swport3: port@3 {
+			swport3: ethernet-port@3 {
 				reg = <3>;
 				label = "lan2";
 				phy-handle = <&swphy3>;
 			};
 
-			swport4: port@4 {
+			swport4: ethernet-port@4 {
 				reg = <4>;
 				label = "lan3";
 				phy-handle = <&swphy4>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&cp0_eth1>;
@@ -355,19 +353,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			swphy1: swphy1@17 {
+			swphy1: ethernet-phy@17 {
 				reg = <17>;
 			};
 
-			swphy2: swphy2@18 {
+			swphy2: ethernet-phy@18 {
 				reg = <18>;
 			};
 
-			swphy3: swphy3@19 {
+			swphy3: ethernet-phy@19 {
 				reg = <19>;
 			};
 
-			swphy4: swphy4@20 {
+			swphy4: ethernet-phy@20 {
 				reg = <20>;
 			};
 		};
@@ -435,13 +433,13 @@
 	/* 7 + 12 SATA connector (J24) */
 	sata-port@0 {
 		phys = <&cp0_comphy2 0>;
-		phy-names = "cp0-sata0-0-phy";
+		status = "okay";
 	};
 
 	/* M.2-2250 B-key (J39) */
 	sata-port@1 {
 		phys = <&cp0_comphy3 1>;
-		phy-names = "cp0-sata0-1-phy";
+		status = "okay";
 	};
 };
 
@@ -455,4 +453,5 @@
 	phys = <&cp0_comphy5 2>;
 	phy-names = "cp0-pcie2-x1-phy";
 	reset-gpios = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>;
+	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>;
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
index 2f440711d21d..710ac44870bd 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
@@ -9,12 +9,6 @@
 #include "armada-ap806-quad.dtsi"
 #include "armada-70x0.dtsi"
 
-/ {
-	model = "Marvell Armada 7040";
-	compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
-		     "marvell,armada-ap806";
-};
-
 &cp0_pcie0 {
 	iommu-map =
 		<0x0   &smmu 0x480 0x20>,
diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
index ba1307c0fadb..b6fc18876093 100644
--- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
@@ -9,12 +9,6 @@
 #include "armada-ap806-dual.dtsi"
 #include "armada-80x0.dtsi"
 
-/ {
-	model = "Marvell Armada 8020";
-	compatible = "marvell,armada8020", "marvell,armada-ap806-dual",
-		     "marvell,armada-ap806";
-};
-
 /* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
  * in CP master is not connected (by package) to the oscillator. So
  * disable it. However, the RTC clock in CP slave is connected to the
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 4125202028c8..90ae93274a16 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -371,25 +371,25 @@
 };
 
 &cp0_gpio2 {
-	sata_reset {
+	sata-reset-hog {
 		gpio-hog;
 		gpios = <1 GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
 
-	lte_reset {
+	lte-reset-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_LOW>;
 		output-low;
 	};
 
-	wlan_disable {
+	wlan_disable-hog {
 		gpio-hog;
 		gpios = <19 GPIO_ACTIVE_LOW>;
 		output-low;
 	};
 
-	lte_disable {
+	lte-disable-hog {
 		gpio-hog;
 		gpios = <21 GPIO_ACTIVE_LOW>;
 		output-low;
@@ -475,7 +475,7 @@
 
 	sata-port@1 {
 		phys = <&cp1_comphy0 1>;
-		phy-names = "cp1-sata0-1-phy";
+		status = "okay";
 	};
 };
 
@@ -497,42 +497,42 @@
 		reset-deassert-us = <10000>;
 	};
 
-	switch0: switch0@4 {
+	switch0: ethernet-switch@4 {
 		compatible = "marvell,mv88e6085";
 		reg = <4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_switch_reset_pins>;
 		reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan2";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan1";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan4";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan3";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&cp1_eth2>;
@@ -545,19 +545,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch0phy3: switch0phy3@14 {
+			switch0phy3: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 92897bd7e6cf..21ecb9c12505 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -122,7 +122,6 @@
 	/* U31 */
 	expander0: pca9555@21 {
 		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x21>;
@@ -131,7 +130,6 @@
 	/* U25 */
 	expander1: pca9555@25 {
 		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x25>;
@@ -145,11 +143,12 @@
 
 	sata-port@0 {
 		phys = <&cp0_comphy1 0>;
-		phy-names = "cp0-sata0-0-phy";
+		status = "okay";
 	};
+
 	sata-port@1 {
 		phys = <&cp0_comphy3 1>;
-		phy-names = "cp0-sata0-1-phy";
+		status = "okay";
 	};
 };
 
@@ -306,11 +305,9 @@
 
 	sata-port@0 {
 		phys = <&cp1_comphy1 0>;
-		phy-names = "cp1-sata0-0-phy";
 	};
 	sata-port@1 {
 		phys = <&cp1_comphy3 1>;
-		phy-names = "cp1-sata0-1-phy";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index ca1aeb69a892..f2d278d171eb 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -135,7 +135,7 @@
 	pinctrl-0 = <&cp0_i2c1_pins>;
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -245,7 +245,7 @@
 	/* CPM Lane 5 - U29 */
 	sata-port@1 {
 		phys = <&cp0_comphy5 1>;
-		phy-names = "cp0-sata0-1-phy";
+		status = "okay";
 	};
 };
 
@@ -345,13 +345,13 @@
 	/* CPS Lane 1 - U32 */
 	sata-port@0 {
 		phys = <&cp1_comphy1 0>;
-		phy-names = "cp1-sata0-0-phy";
+		status = "okay";
 	};
 
 	/* CPS Lane 3 - U31 */
 	sata-port@1 {
 		phys = <&cp1_comphy3 1>;
-		phy-names = "cp1-sata0-1-phy";
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
index eb0473503936..def25d51c4bf 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
@@ -13,7 +13,7 @@
 
 / {
 	model = "IEI-Puzzle-M801";
-	compatible = "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806";
+	compatible = "iei,puzzle-m801", "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806";
 
 	aliases {
 		ethernet0 = &cp0_eth0;
@@ -285,7 +285,7 @@
 	pinctrl-0 = <&cp0_i2c1_pins>;
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9544";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -408,12 +408,12 @@
 
 	sata-port@0 {
 		phys = <&cp0_comphy2 0>;
-		phy-names = "cp0-sata0-0-phy";
+		status = "okay";
 	};
 
 	sata-port@1 {
 		phys = <&cp0_comphy5 1>;
-		phy-names = "cp0-sata0-1-phy";
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
index 22c2d6ebf381..3efd9b9e6892 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -9,12 +9,6 @@
 #include "armada-ap806-quad.dtsi"
 #include "armada-80x0.dtsi"
 
-/ {
-	model = "Marvell Armada 8040";
-	compatible = "marvell,armada8040", "marvell,armada-ap806-quad",
-		     "marvell,armada-ap806";
-};
-
 &cp0_pcie0 {
 	iommu-map =
 		<0x0   &smmu 0x480 0x20>,
diff --git a/arch/arm64/boot/dts/marvell/armada-8080.dtsi b/arch/arm64/boot/dts/marvell/armada-8080.dtsi
index 299e814d1ded..32bb56f2fe3f 100644
--- a/arch/arm64/boot/dts/marvell/armada-8080.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8080.dtsi
@@ -6,9 +6,3 @@
  */
 
 #include "armada-ap810-ap0-octa-core.dtsi"
-
-/ {
-	model = "Marvell 8080 board";
-	compatible = "marvell,armada-8080", "marvell,armada-ap810-octa",
-				"marvell,armada-ap810";
-};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
index fcab5173fe67..82f4dedfc25e 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
@@ -8,9 +8,6 @@
 #include "armada-ap806.dtsi"
 
 / {
-	model = "Marvell Armada AP806 Dual";
-	compatible = "marvell,armada-ap806-dual", "marvell,armada-ap806";
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -51,6 +48,8 @@
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
index 3db427122f9e..f37f49c79a50 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -8,9 +8,6 @@
 #include "armada-ap806.dtsi"
 
 / {
-	model = "Marvell Armada AP806 Quad";
-	compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806";
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -81,6 +78,8 @@
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		l2_1: l2-cache1 {
@@ -88,6 +87,8 @@
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 866628679ac7..73a570cf1010 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -5,14 +5,8 @@
  * Device Tree file for Marvell Armada AP806.
  */
 
-#define AP_NAME		ap806
 #include "armada-ap80x.dtsi"
 
-/ {
-	model = "Marvell Armada AP806";
-	compatible = "marvell,armada-ap806";
-};
-
 &ap_syscon0 {
 	ap_clk: clock {
 		compatible = "marvell,ap806-clock";
diff --git a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
index 68782f161f12..e8af7546e893 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
@@ -8,9 +8,6 @@
 #include "armada-ap807.dtsi"
 
 / {
-	model = "Marvell Armada AP807 Quad";
-	compatible = "marvell,armada-ap807-quad", "marvell,armada-ap807";
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -81,6 +78,8 @@
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		l2_1: l2-cache1 {
@@ -88,6 +87,8 @@
 			cache-size = <0x80000>;
 			cache-line-size = <64>;
 			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
index 4a23f65d475f..196793d8715c 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
@@ -5,14 +5,8 @@
  * Copyright (C) 2019 Marvell Technology Group Ltd.
  */
 
-#define AP_NAME		ap807
 #include "armada-ap80x.dtsi"
 
-/ {
-	model = "Marvell Armada AP807";
-	compatible = "marvell,armada-ap807";
-};
-
 &ap_syscon0 {
 	ap_clk: clock {
 		compatible = "marvell,ap807-clock";
@@ -33,3 +27,6 @@
 		     "marvell,armada-ap806-sdhci"; /* Backward compatibility */
 };
 
+&ap_thermal {
+	compatible = "marvell,armada-ap807-thermal";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index a06a0a889c43..40e146982921 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -41,22 +41,42 @@
 			reg = <0x0 0x4000000 0x0 0x200000>;
 			no-map;
 		};
+
+		tee@4400000 {
+			reg = <0 0x4400000 0 0x1000000>;
+			no-map;
+		};
 	};
 
-	AP_NAME {
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupt-parent = <&pic>;
+		interrupts = <17>;
+	};
+
+	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
 		ranges;
 
-		config-space@f0000000 {
+		bus@f0000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
 			ranges = <0x0 0x0 0xf0000000 0x1000000>;
 
-			smmu: iommu@5000000 {
+			smmu: iommu@100000 {
 				compatible = "marvell,ap806-smmu-500", "arm,mmu-500";
 				reg = <0x100000 0x100000>;
 				dma-coherent;
@@ -117,23 +137,8 @@
 				};
 			};
 
-			timer {
-				compatible = "arm,armv8-timer";
-				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-			};
-
-			pmu {
-				compatible = "arm,cortex-a72-pmu";
-				interrupt-parent = <&pic>;
-				interrupts = <17>;
-			};
-
 			odmi: odmi@300000 {
 				compatible = "marvell,odmi-controller";
-				interrupt-controller;
 				msi-controller;
 				marvell,odmi-frames = <4>;
 				reg = <0x300000 0x4000>,
@@ -312,7 +317,7 @@
 	 * first one that will have a critical trip point will be chosen.
 	 */
 	thermal-zones {
-		ap_thermal_ic: ap-thermal-ic {
+		ap_thermal_ic: ap-ic-thermal {
 			polling-delay-passive = <0>; /* Interrupt driven */
 			polling-delay = <0>; /* Interrupt driven */
 
@@ -329,7 +334,7 @@
 			cooling-maps { };
 		};
 
-		ap_thermal_cpu0: ap-thermal-cpu0 {
+		ap_thermal_cpu0: ap-cpu0-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
@@ -362,7 +367,7 @@
 			};
 		};
 
-		ap_thermal_cpu1: ap-thermal-cpu1 {
+		ap_thermal_cpu1: ap-cpu1-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
@@ -395,7 +400,7 @@
 			};
 		};
 
-		ap_thermal_cpu2: ap-thermal-cpu2 {
+		ap_thermal_cpu2: ap-cpu2-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
@@ -428,7 +433,7 @@
 			};
 		};
 
-		ap_thermal_cpu3: ap-thermal-cpu3 {
+		ap_thermal_cpu3: ap-cpu3-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
index d1a7143ef3d4..2e719ffc8289 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
@@ -11,7 +11,6 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "marvell,armada-ap810-octa";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
index 8107d120a8a7..abb37e5fc2c0 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
@@ -10,10 +10,9 @@
 /dts-v1/;
 
 / {
-	model = "Marvell Armada AP810";
-	compatible = "marvell,armada-ap810";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	aliases {
 		serial0 = &uart0_ap0;
@@ -25,14 +24,21 @@
 		method = "smc";
 	};
 
-	ap810-ap0 {
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
 		ranges;
 
-		config-space@e8000000 {
+		bus@e8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
@@ -54,7 +60,7 @@
 				      <0x00d0000 0x1000>,	/* GICH */
 				      <0x00e0000 0x2000>;	/* GICV */
 
-				gic_its_ap0: interrupt-controller@3040000 {
+				gic_its_ap0: msi-controller@3040000 {
 					compatible = "arm,gic-v3-its";
 					msi-controller;
 					#msi-cells = <1>;
@@ -62,14 +68,6 @@
 				};
 			};
 
-			timer {
-				compatible = "arm,armv8-timer";
-				interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-					     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-					     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-					     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-			};
-
 			xor@400000 {
 				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x400000 0x1000>,
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index 4fd33b0fa56e..e3cfd168becc 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -5,8 +5,4 @@
  * Device Tree file for Marvell Armada CP110.
  */
 
-#define CP11X_TYPE cp110
-
 #include "armada-cp11x.dtsi"
-
-#undef CP11X_TYPE
diff --git a/arch/arm64/boot/dts/marvell/armada-cp115.dtsi b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
index 1d0a9653e681..ec6432c8db7c 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
@@ -5,8 +5,4 @@
  * Device Tree file for Marvell Armada CP115.
  */
 
-#define CP11X_TYPE cp115
-
 #include "armada-cp11x.dtsi"
-
-#undef CP11X_TYPE
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index d6c0990a267d..d9d409eac259 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -17,7 +17,7 @@
 	 * The contents of the node are defined below, in order to
 	 * save one indentation level
 	 */
-	CP11X_NAME: CP11X_NAME { };
+	CP11X_NAME: CP11X_NODE_NAME(bus) { };
 
 	/*
 	 * CPs only have one sensor in the thermal IC.
@@ -25,7 +25,7 @@
 	 * The cooling maps are empty as there are no cooling devices.
 	 */
 	thermal-zones {
-		CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) {
+		CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(ic-thermal) {
 			polling-delay-passive = <0>; /* Interrupt driven */
 			polling-delay = <0>; /* Interrupt driven */
 
@@ -51,13 +51,15 @@
 	interrupt-parent = <&CP11X_LABEL(icu_nsr)>;
 	ranges;
 
-	config-space@CP11X_BASE {
+	bus@CP11X_BASE {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>;
 
 		CP11X_LABEL(ethernet): ethernet@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "marvell,armada-7k-pp22";
 			reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
 			clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>,
@@ -69,7 +71,7 @@
 			status = "disabled";
 			dma-coherent;
 
-			CP11X_LABEL(eth0): eth0 {
+			CP11X_LABEL(eth0): ethernet-port@0 {
 				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
 					<43 IRQ_TYPE_LEVEL_HIGH>,
 					<47 IRQ_TYPE_LEVEL_HIGH>,
@@ -83,12 +85,13 @@
 				interrupt-names = "hif0", "hif1", "hif2",
 					"hif3", "hif4", "hif5", "hif6", "hif7",
 					"hif8", "link";
-				port-id = <0>;
+				reg = <0>;
+				port-id = <0>; /* For backward compatibility. */
 				gop-port-id = <0>;
 				status = "disabled";
 			};
 
-			CP11X_LABEL(eth1): eth1 {
+			CP11X_LABEL(eth1): ethernet-port@1 {
 				interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
 					<44 IRQ_TYPE_LEVEL_HIGH>,
 					<48 IRQ_TYPE_LEVEL_HIGH>,
@@ -102,12 +105,13 @@
 				interrupt-names = "hif0", "hif1", "hif2",
 					"hif3", "hif4", "hif5", "hif6", "hif7",
 					"hif8", "link";
-				port-id = <1>;
+				reg = <1>;
+				port-id = <1>; /* For backward compatibility. */
 				gop-port-id = <2>;
 				status = "disabled";
 			};
 
-			CP11X_LABEL(eth2): eth2 {
+			CP11X_LABEL(eth2): ethernet-port@2 {
 				interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
 					<45 IRQ_TYPE_LEVEL_HIGH>,
 					<49 IRQ_TYPE_LEVEL_HIGH>,
@@ -121,7 +125,8 @@
 				interrupt-names = "hif0", "hif1", "hif2",
 					"hif3", "hif4", "hif5", "hif6", "hif7",
 					"hif8", "link";
-				port-id = <2>;
+				reg = <2>;
+				port-id = <2>; /* For backward compatibility. */
 				gop-port-id = <3>;
 				status = "disabled";
 			};
@@ -197,6 +202,7 @@
 			CP11X_LABEL(icu_nsr): interrupt-controller@10 {
 				compatible = "marvell,cp110-icu-nsr";
 				reg = <0x10 0x20>;
+				#address-cells = <0>;
 				#interrupt-cells = <2>;
 				interrupt-controller;
 				msi-parent = <&gicp>;
@@ -342,10 +348,12 @@
 
 			sata-port@0 {
 				reg = <0>;
+				status = "disabled";
 			};
 
 			sata-port@1 {
 				reg = <1>;
+				status = "disabled";
 			};
 		};
 
@@ -463,7 +471,7 @@
 			status = "disabled";
 		};
 
-		CP11X_LABEL(nand_controller): nand@720000 {
+		CP11X_LABEL(nand_controller): nand-controller@720000 {
 			/*
 			 * Due to the limitation of the pins available
 			 * this controller is only usable on the CPM
@@ -506,14 +514,14 @@
 		CP11X_LABEL(crypto): crypto@800000 {
 			compatible = "inside-secure,safexcel-eip197b";
 			reg = <0x800000 0x200000>;
-			interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
-				<88 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <88 IRQ_TYPE_LEVEL_HIGH>,
 				<89 IRQ_TYPE_LEVEL_HIGH>,
 				<90 IRQ_TYPE_LEVEL_HIGH>,
 				<91 IRQ_TYPE_LEVEL_HIGH>,
-				<92 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mem", "ring0", "ring1",
-				"ring2", "ring3", "eip";
+				<92 IRQ_TYPE_LEVEL_HIGH>,
+				<87 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ring0", "ring1", "ring2", "ring3",
+					  "eip", "mem";
 			clock-names = "core", "reg";
 			clocks = <&CP11X_LABEL(clk) 1 26>,
 				 <&CP11X_LABEL(clk) 1 17>;
diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf-base.dts b/arch/arm64/boot/dts/marvell/cn9130-cf-base.dts
new file mode 100644
index 000000000000..788a5c302b17
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-cf-base.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for SolidRun CN9130 Clearfog Base.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "cn9130.dtsi"
+#include "cn9130-sr-som.dtsi"
+#include "cn9130-cf.dtsi"
+
+/ {
+	model = "SolidRun CN9130 Clearfog Base";
+	compatible = "solidrun,cn9130-clearfog-base",
+		     "solidrun,cn9130-sr-som", "marvell,cn9130";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&rear_button_pins>;
+		pinctrl-names = "default";
+
+		button-0 {
+			/* The rear SW3 button */
+			label = "Rear Button";
+			gpios = <&cp0_gpio1 31 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+	};
+
+	rfkill-m2-gnss {
+		compatible = "rfkill-gpio";
+		label = "m.2 GNSS";
+		radio-type = "gps";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&expander0 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* M.2 is B-keyed, so w-disable is for WWAN */
+	rfkill-m2-wwan {
+		compatible = "rfkill-gpio";
+		label = "m.2 WWAN";
+		radio-type = "wwan";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&expander0 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* SRDS #3 - SGMII 1GE */
+&cp0_eth1 {
+	phy = <&phy1>;
+	phys = <&cp0_comphy3 1>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&cp0_eth2_phy {
+	/*
+	 * Configure LEDs default behaviour:
+	 * - LED[0]: link/activity: On/blink (green)
+	 * - LED[1]: link is 100/1000Mbps: On (yellow)
+	 * - LED[2]: high impedance (floating)
+	 */
+	marvell,reg-init = <3 16 0xf000 0x0a61>;
+
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			default-state = "keep";
+		};
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_WAN;
+			default-state = "keep";
+		};
+	};
+};
+
+&cp0_gpio1 {
+	sim-select-hog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sim-select";
+	};
+};
+
+&cp0_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		/*
+		 * Configure LEDs default behaviour:
+		 * - LED[0]: link/activity: On/blink (green)
+		 * - LED[1]: link is 100/1000Mbps: On (yellow)
+		 * - LED[2]: high impedance (floating)
+		 *
+		 * Configure LEDs electrical polarity
+		 * - on-state: low
+		 * - off-state: high (not hi-z, to avoid residual glow)
+		 */
+		marvell,reg-init = <3 16 0xf000 0x0a61>,
+				   <3 17 0x003f 0x000a>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+&cp0_pinctrl {
+	pinctrl-0 = <&sim_select_pins>;
+	pintrl-names = "default";
+
+	rear_button_pins: cp0-rear-button-pins {
+		marvell,pins = "mpp31";
+		marvell,function = "gpio";
+	};
+
+	sim_select_pins: cp0-sim-select-pins {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+};
+
+/*
+ * SRDS #4 - USB 3.0 host on M.2 connector
+ * USB-2.0 Host on Type-A connector
+ */
+&cp0_usb3_1 {
+	phys = <&cp0_comphy4 1>, <&cp0_utmi1>;
+	phy-names = "comphy", "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&expander0 {
+	m2-full-card-power-off-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-full-card-power-off";
+	};
+
+	m2-reset-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-reset";
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts b/arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts
new file mode 100644
index 000000000000..a27fe0042867
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for SolidRun CN9130 Clearfog Pro.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "cn9130.dtsi"
+#include "cn9130-sr-som.dtsi"
+#include "cn9130-cf.dtsi"
+
+/ {
+	model = "SolidRun CN9130 Clearfog Pro";
+	compatible = "solidrun,cn9130-clearfog-pro",
+		     "solidrun,cn9130-sr-som", "marvell,cn9130";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&rear_button_pins>;
+		pinctrl-names = "default";
+
+		button-0 {
+			/* The rear SW3 button */
+			label = "Rear Button";
+			gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+	};
+};
+
+/* SRDS #3 - SGMII 1GE to L2 switch */
+&cp0_eth1 {
+	phys = <&cp0_comphy3 1>;
+	phy-mode = "sgmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&cp0_eth2_phy {
+	/*
+	 * Configure LEDs default behaviour similar to switch ports:
+	 * - LED[0]: link/activity: On/blink (green)
+	 * - LED[1]: link is 100/1000Mbps: On (red)
+	 * - LED[2]: high impedance (floating)
+	 *
+	 * Switch port defaults:
+	 * - LED0: link/activity: On/blink (green)
+	 * - LED1: link is 1000Mbps: On (red)
+	 *
+	 * Identical configuration is impossible with hardware offload.
+	 */
+	marvell,reg-init = <3 16 0xf000 0x0a61>;
+
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			label = "LED2";
+			default-state = "keep";
+		};
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			label = "LED1";
+			default-state = "keep";
+		};
+	};
+};
+
+&cp0_mdio {
+	ethernet-switch@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+		pinctrl-0 = <&dsa_clk_pins &dsa_pins>;
+		pinctrl-names = "default";
+		reset-gpios = <&cp0_gpio1 27 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@0 {
+				reg = <0>;
+				label = "lan5";
+				phy = <&switch0phy0>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						label = "LED12";
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_RED>;
+						function = LED_FUNCTION_LAN;
+						label = "LED11";
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan4";
+				phy = <&switch0phy1>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						label = "LED10";
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_RED>;
+						function = LED_FUNCTION_LAN;
+						label = "LED9";
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy = <&switch0phy2>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						label = "LED8";
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_RED>;
+						function = LED_FUNCTION_LAN;
+						label = "LED7";
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy = <&switch0phy3>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						label = "LED6";
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_RED>;
+						function = LED_FUNCTION_LAN;
+						label = "LED5";
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@4 {
+				reg = <4>;
+				label = "lan1";
+				phy = <&switch0phy4>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						label = "LED4";
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_RED>;
+						function = LED_FUNCTION_LAN;
+						label = "LED3";
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&cp0_eth1>;
+				phy-mode = "sgmii";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			ethernet-port@6 {
+				reg = <6>;
+				label = "lan6";
+				phy-mode = "rgmii";
+
+				/*
+				 * Because of mdio address conflict the
+				 * external phy is not readable.
+				 * Force a fixed link instead.
+				 */
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: ethernet-phy@0 {
+				reg = <0x0>;
+			};
+
+			switch0phy1: ethernet-phy@1 {
+				reg = <0x1>;
+				/*
+				 * Indirectly configure default behaviour
+				 * for port lan6 leds behind external phy.
+				 * Internal PHYs are not using page 3,
+				 * therefore writing to it is safe.
+				 */
+				marvell,reg-init = <3 16 0xf000 0x0a61>;
+			};
+
+			switch0phy2: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy3: ethernet-phy@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy4: ethernet-phy@4 {
+				reg = <0x4>;
+			};
+		};
+
+		/*
+		 * There is an external phy on the switch mdio bus.
+		 * Because its mdio address collides with internal phys,
+		 * it is not readable.
+		 *
+		 * mdio-external {
+		 *	compatible = "marvell,mv88e6xxx-mdio-external";
+		 *	#address-cells = <1>;
+		 *	#size-cells = <0>;
+		 *
+		 *	ethernet-phy@1 {
+		 *		reg = <0x1>;
+		 *	};
+		 * };
+		 */
+	};
+};
+
+/* SRDS #4 - miniPCIe (CON2) */
+&cp0_pcie1 {
+	num-lanes = <1>;
+	phys = <&cp0_comphy4 1>;
+	/* dw-pcie inverts internally */
+	reset-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	dsa_clk_pins: cp0-dsa-clk-pins {
+		marvell,pins = "mpp40";
+		marvell,function = "synce1";
+	};
+
+	dsa_pins: cp0-dsa-pins {
+		marvell,pins = "mpp27", "mpp29";
+		marvell,function = "gpio";
+	};
+
+	rear_button_pins: cp0-rear-button-pins {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+
+	cp0_spi1_cs1_pins: cp0-spi1-cs1-pins {
+		marvell,pins = "mpp12";
+		marvell,function = "spi1";
+	};
+};
+
+&cp0_spi1 {
+	/* add pin for chip-select 1 on mikrobus */
+	pinctrl-0 = <&cp0_spi1_pins &cp0_spi1_cs1_pins>;
+};
+
+/* USB-2.0 Host on Type-A connector */
+&cp0_usb3_1 {
+	phys = <&cp0_utmi1>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&expander0 {
+	/* CON2 */
+	pcie1-0-clkreq-hog {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "pcie1.0-clkreq";
+	};
+
+	/* CON2 */
+	pcie1-0-w-disable-hog {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "pcie1.0-w-disable";
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi
new file mode 100644
index 000000000000..bd42bfbe408b
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for common base of SolidRun CN9130 Clearfog Base and Pro.
+ *
+ */
+
+/ {
+	aliases {
+		/* label nics same order as armada 388 clearfog */
+		ethernet0 = &cp0_eth2;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth0;
+		i2c1 = &cp0_i2c1;
+		mmc1 = &cp0_sdhci0;
+	};
+
+	reg_usb3_vbus0: regulator-usb3-vbus0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_i2c1>;
+		los-gpios = <&expander0 12 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&expander0 15 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&expander0 14 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&expander0 13 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+/* SRDS #2 - SFP+ 10GE */
+&cp0_eth0 {
+	managed = "in-band-status";
+	phys = <&cp0_comphy2 0>;
+	phy-mode = "10gbase-r";
+	sfp = <&sfp>;
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	expander0: gpio-expander@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-0 = <&expander0_pins>;
+		pinctrl-names = "default";
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		/* CON3 */
+		pcie2-0-clkreq-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "pcie2.0-clkreq";
+		};
+
+		/* CON3 */
+		pcie2-0-w-disable-hog {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "pcie2.0-w-disable";
+		};
+
+		usb3-ilimit-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "usb3-current-limit";
+		};
+
+		m2-devslp-hog {
+			gpio-hog;
+			gpios = <11 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "m.2 devslp";
+		};
+	};
+
+	/* The MCP3021 supports standard and fast modes */
+	adc@4c {
+		compatible = "microchip,mcp3021";
+		reg = <0x4c>;
+	};
+
+	carrier_eeprom: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <8>;
+	};
+};
+
+&cp0_i2c1 {
+	/*
+	 * Routed to SFP, M.2, mikrobus, and miniPCIe
+	 * SFP limits this to 100kHz, and requires an AT24C01A/02/04 with
+	 *  address pins tied low, which takes addresses 0x50 and 0x51.
+	 * Mikrobus doesn't specify beyond an I2C bus being present.
+	 * PCIe uses ARP to assign addresses, or 0x63-0x64.
+	 */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* SRDS #5 - miniPCIe (CON3) */
+&cp0_pcie2 {
+	num-lanes = <1>;
+	phys = <&cp0_comphy5 2>;
+	/* dw-pcie inverts internally */
+	reset-gpios = <&expander0 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	cp0_i2c1_pins: cp0-i2c1-pins {
+		marvell,pins = "mpp35", "mpp36";
+		marvell,function = "i2c1";
+	};
+
+	cp0_mmc0_pins: cp0-mmc0-pins {
+		marvell,pins = "mpp43", "mpp56", "mpp57", "mpp58",
+			       "mpp59", "mpp60", "mpp61";
+		marvell,function = "sdio";
+	};
+
+	mikro_spi_pins: cp0-spi1-cs1-pins {
+		marvell,pins = "mpp12";
+		marvell,function = "spi1";
+	};
+
+	mikro_uart_pins: cp0-uart-pins {
+		marvell,pins = "mpp2", "mpp3";
+		marvell,function = "uart1";
+	};
+
+	expander0_pins: cp0-expander0-pins {
+		marvell,pins = "mpp4";
+		marvell,function = "gpio";
+	};
+};
+
+/* SRDS #0 - SATA on M.2 connector */
+&cp0_sata0 {
+	status = "okay";
+
+	sata-port@1 {
+		phys = <&cp0_comphy0 1>;
+		status = "okay";
+	};
+};
+
+/* microSD */
+&cp0_sdhci0 {
+	pinctrl-0 = <&cp0_mmc0_pins>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&cp0_spi1 {
+	/* CS1 for mikrobus */
+	pinctrl-0 = <&cp0_spi1_pins &mikro_spi_pins>;
+};
+
+/*
+ * SRDS #1 - USB-3.0 Host on Type-A connector
+ * USB-2.0 Host on mPCI-e connector (CON3)
+ */
+&cp0_usb3_0 {
+	phys = <&cp0_comphy1 0>, <&cp0_utmi0>;
+	phy-names = "comphy", "utmi";
+	vbus-supply = <&reg_usb3_vbus0>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+/* mikrobus uart */
+&cp0_uart0 {
+	pinctrl-0 = <&mikro_uart_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts b/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts
index 0904cb0309ae..34194745f79e 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts
@@ -28,6 +28,7 @@
 		status = "okay";
 		/* Generic PHY, providing serdes lanes */
 		phys = <&cp0_comphy2 0>;
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
index 8e4ec243fb8f..5e7d6de3cdde 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -26,7 +26,7 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	ap0_reg_mmc_vccq: ap0_mmc_vccq@0 {
+	ap0_reg_mmc_vccq: regulator-1 {
 		compatible = "regulator-gpio";
 		regulator-name = "ap0_mmc_vccq";
 		regulator-min-microvolt = <1800000>;
@@ -36,7 +36,7 @@
 			  3300000 0x0>;
 	};
 
-	cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+	cp0_reg_usb3_vbus1: regulator-2 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp0-xhci1-vbus";
 		regulator-min-microvolt = <5000000>;
@@ -45,16 +45,16 @@
 		gpio = <&expander0 8 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp0_usb3_0_phy0: cp0_usb3_phy0 {
+	cp0_usb3_0_phy0: usb-phy-1 {
 		compatible = "usb-nop-xceiv";
 	};
 
-	cp0_usb3_0_phy1: cp0_usb3_phy1 {
+	cp0_usb3_0_phy1: usb-phy-2 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp0_reg_usb3_vbus1>;
 	};
 
-	cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+	cp0_reg_sd_vccq: regulator-3 {
 		compatible = "regulator-gpio";
 		regulator-name = "cp0_sd_vccq";
 		regulator-min-microvolt = <1800000>;
@@ -64,7 +64,7 @@
 			  3300000 0x0>;
 	};
 
-	cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+	cp0_reg_sd_vcc: regulator-4 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp0_sd_vcc";
 		regulator-min-microvolt = <3300000>;
@@ -82,7 +82,6 @@
 		tx-disable-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpios = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>;
 		maximum-power-milliwatt = <3000>;
-		status = "okay";
 	};
 };
 
@@ -120,7 +119,7 @@
 				       "mpp59", "mpp60", "mpp61";
 			marvell,function = "sdio";
 		};
-		cp0_spi0_pins: cp0-spi-pins-0 {
+		cp0_spi1_pins: cp0-spi-pins-1 {
 			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
 			marvell,function = "spi1";
 		};
@@ -170,7 +169,7 @@
 
 &cp0_spi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_spi0_pins>;
+	pinctrl-0 = <&cp0_spi1_pins>;
 	reg = <0x700680 0x50>,		/* control */
 	      <0x2000000 0x1000000>;	/* CS0 */
 	status = "okay";
@@ -207,11 +206,9 @@
 		reg = <0>;
 	};
 
-	switch6: switch0@6 {
+	switch6: ethernet-switch@6 {
 		/* Actual device is MV88E6393X */
 		compatible = "marvell,mv88e6190";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <6>;
 		interrupt-parent = <&cp0_gpio1>;
 		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
@@ -220,59 +217,59 @@
 
 		dsa,member = <0 0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "p1";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "p2";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "p3";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "p4";
 				phy-handle = <&switch0phy4>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "p5";
 				phy-handle = <&switch0phy5>;
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				reg = <6>;
 				label = "p6";
 				phy-handle = <&switch0phy6>;
 			};
 
-			port@7 {
+			ethernet-port@7 {
 				reg = <7>;
 				label = "p7";
 				phy-handle = <&switch0phy7>;
 			};
 
-			port@8 {
+			ethernet-port@8 {
 				reg = <8>;
 				label = "p8";
 				phy-handle = <&switch0phy8>;
 			};
 
-			port@9 {
+			ethernet-port@9 {
 				reg = <9>;
 				label = "p9";
 				phy-mode = "10gbase-r";
@@ -280,10 +277,11 @@
 				managed = "in-band-status";
 			};
 
-			port@a {
+			ethernet-port@a {
 				reg = <10>;
-				label = "cpu";
 				ethernet = <&cp0_eth0>;
+				phy-mode = "10gbase-r";
+				managed = "in-band-status";
 			};
 
 		};
@@ -292,35 +290,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1: switch0phy1@1 {
+			switch0phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy2: switch0phy2@2 {
+			switch0phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy3: switch0phy3@3 {
+			switch0phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy4: switch0phy4@4 {
+			switch0phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy5: switch0phy5@5 {
+			switch0phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy6: switch0phy6@6 {
+			switch0phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy7: switch0phy7@7 {
+			switch0phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy8: switch0phy8@8 {
+			switch0phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
new file mode 100644
index 000000000000..028496ebc473
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB Com Express CPU module board.
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9130-DB COM EXPRESS type 7 CPU module board";
+	compatible = "marvell,cn9130-cpu-module", "marvell,cn9130",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+};
+
+&ap0_reg_sd_vccq {
+	regulator-max-microvolt = <1800000>;
+	states = <1800000 0x1 1800000 0x0>;
+	/delete-property/ gpios;
+};
+
+&cp0_reg_usb3_vbus0 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_usb3_vbus1 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_sd_vcc {
+	status = "disabled";
+};
+
+&cp0_reg_sd_vccq {
+	status = "disabled";
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_eth0 {
+	status = "disabled";
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+	status = "disabled";
+};
+
+&cp0_mdio {
+	status = "okay";
+	pinctrl-0 = <&cp0_ge_mdio_pins>;
+	phy0: ethernet-phy@0 {
+		status = "okay";
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_ge_mdio_pins: ge-mdio-pins {
+			marvell,pins = "mpp40", "mpp41";
+			marvell,function = "ge";
+		};
+	};
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_spi1 {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
index c7de1ea0d470..50e9e0724828 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
@@ -30,7 +30,7 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	ap0_reg_sd_vccq: ap0_sd_vccq@0 {
+	ap0_reg_sd_vccq: regulator-1 {
 		compatible = "regulator-gpio";
 		regulator-name = "ap0_sd_vccq";
 		regulator-min-microvolt = <1800000>;
@@ -39,7 +39,7 @@
 		states = <1800000 0x1 3300000 0x0>;
 	};
 
-	cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 {
+	cp0_reg_usb3_vbus0: regulator-2 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp0-xhci0-vbus";
 		regulator-min-microvolt = <5000000>;
@@ -48,12 +48,12 @@
 		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp0_usb3_0_phy0: cp0_usb3_phy@0 {
+	cp0_usb3_0_phy0: usb-phy-1 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp0_reg_usb3_vbus0>;
 	};
 
-	cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+	cp0_reg_usb3_vbus1: regulator-3 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp0-xhci1-vbus";
 		regulator-min-microvolt = <5000000>;
@@ -62,12 +62,12 @@
 		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp0_usb3_0_phy1: cp0_usb3_phy@1 {
+	cp0_usb3_0_phy1: usb-phy-2 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp0_reg_usb3_vbus1>;
 	};
 
-	cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+	cp0_reg_sd_vccq: regulator-4 {
 		compatible = "regulator-gpio";
 		regulator-name = "cp0_sd_vccq";
 		regulator-min-microvolt = <1800000>;
@@ -77,7 +77,7 @@
 			  3300000 0x0>;
 	};
 
-	cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+	cp0_reg_sd_vcc: regulator-5 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp0_sd_vcc";
 		regulator-min-microvolt = <3300000>;
@@ -87,7 +87,7 @@
 		regulator-always-on;
 	};
 
-	cp0_sfp_eth0: sfp-eth@0 {
+	cp0_sfp_eth0: sfp-eth-1 {
 		compatible = "sff,sfp";
 		i2c-bus = <&cp0_sfpp0_i2c>;
 		los-gpios = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>;
@@ -209,7 +209,6 @@
 			/* U12 */
 			cp0_module_expander1: pca9555@21 {
 				compatible = "nxp,pca9555";
-				pinctrl-names = "default";
 				gpio-controller;
 				#gpio-cells = <2>;
 				reg = <0x21>;
@@ -307,12 +306,10 @@
 &cp0_spi1 {
 	status = "disabled";
 	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_spi0_pins>;
+	pinctrl-0 = <&cp0_spi1_pins>;
 	reg = <0x700680 0x50>;
 
 	flash@0 {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		/* On-board MUX does not allow higher frequencies */
@@ -371,7 +368,7 @@
 				       "mpp59", "mpp60", "mpp61";
 			marvell,function = "sdio";
 		};
-		cp0_spi0_pins: cp0-spi-pins-0 {
+		cp0_spi1_pins: cp0-spi-pins-1 {
 			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
 			marvell,function = "spi1";
 		};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi
new file mode 100644
index 000000000000..f95202decfce
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+		i2c0 = &cp0_i2c0;
+		mmc0 = &ap_sdhci0;
+		rtc0 = &cp0_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	v_1_8: regulator-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* requires assembly of R9307 */
+	vhv: regulator-vhv-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vhv-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-0 = <&cp0_reg_vhv_pins>;
+		pinctrl-names = "default";
+		gpios = <&cp0_gpio2 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&ap_pinctrl {
+	ap_mmc0_pins: ap-mmc0-pins {
+		marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", "mpp4", "mpp5",
+					   "mpp6", "mpp7", "mpp8", "mpp9", "mpp10", "mpp12";
+		marvell,function = "sdio";
+		/*
+		 * mpp12 is emmc reset, function should be sdio (hw_rst),
+		 * but pinctrl-mvebu does not support this.
+		 *
+		 * From pinctrl-mvebu.h:
+		 * "The name will be used to switch to this setting in DT description, e.g.
+		 * marvell,function = "uart2". subname is only for debugging purposes."
+		 */
+	};
+};
+
+&ap_sdhci0 {
+	bus-width = <8>;
+	pinctrl-0 = <&ap_mmc0_pins>;
+	pinctrl-names = "default";
+	vqmmc-supply = <&v_1_8>;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* for assembly with phy */
+&cp0_eth2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_eth2_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&cp0_eth2_phy>;
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	som_eeprom: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <8>;
+	};
+};
+
+&cp0_mdio {
+	pinctrl-0 = <&cp0_mdio_pins>;
+	status = "okay";
+
+	/* assembly option */
+	cp0_eth2_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cp0_spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi1_pins>;
+	/* max speed limited by a mux */
+	spi-max-frequency = <1800000000>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		/* read command supports max. 50MHz */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_eth2_pins: cp0-ge2-rgmii-pins {
+			marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47",
+				       "mpp48", "mpp49", "mpp50", "mpp51",
+				       "mpp52", "mpp53", "mpp54", "mpp55";
+			/* docs call it "ge2", but cp110-pinctrl "ge1" */
+			marvell,function = "ge1";
+		};
+
+		cp0_i2c0_pins: cp0-i2c0-pins {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+
+		cp0_mdio_pins: cp0-mdio-pins {
+			marvell,pins = "mpp0", "mpp1";
+			marvell,function = "ge";
+		};
+
+		cp0_spi1_pins: cp0-spi1-pins {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+
+		cp0_reg_vhv_pins: cp0-reg-vhv-pins {
+			marvell,pins = "mpp41";
+			marvell,function = "gpio";
+		};
+	};
+};
+
+/* AP default console */
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
new file mode 100644
index 000000000000..338853d3b179
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
@@ -0,0 +1,639 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for SolidRun CN9130 Clearfog Base.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "cn9130.dtsi"
+#include "cn9130-sr-som.dtsi"
+
+/*
+ * Instantiate the external CP115
+ */
+
+#define CP11X_NAME		cp1
+#define CP11X_BASE		f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f4600000
+#define CP11X_PCIE1_BASE	f4620000
+#define CP11X_PCIE2_BASE	f4640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+/ {
+	model = "SolidRun CN9131 SolidWAN";
+	compatible = "solidrun,cn9131-solidwan",
+		     "solidrun,cn9130-sr-som", "marvell,cn9130";
+
+	aliases {
+		ethernet0 = &cp1_eth1;
+		ethernet1 = &cp1_eth2;
+		ethernet2 = &cp0_eth1;
+		ethernet3 = &cp0_eth2;
+		ethernet4 = &cp0_eth0;
+		ethernet5 = &cp1_eth0;
+		gpio0 = &ap_gpio;
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		gpio3 = &cp1_gpio1;
+		gpio4 = &cp1_gpio2;
+		gpio5 = &expander0;
+		i2c0 = &cp0_i2c0;
+		i2c1 = &cp0_i2c1;
+		i2c2 = &cp1_i2c1;
+		mmc0 = &ap_sdhci0;
+		mmc1 = &cp0_sdhci0;
+		rtc0 = &cp0_rtc;
+		rtc1 = &carrier_rtc;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_led_pins &cp1_led_pins>;
+
+		/* for sfp-1 (J42) */
+		led-sfp1-activity {
+			label = "sfp1:green";
+			gpios = <&cp0_gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* for sfp-1 (J42) */
+		led-sfp1-link {
+			label = "sfp1:yellow";
+			gpios = <&cp0_gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* (J28) */
+		led-sfp0-activity {
+			label = "sfp0:green";
+			gpios = <&cp1_gpio2 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* (J28) */
+		led-sfp0-link {
+			label = "sfp0:yellow";
+			gpios = <&cp1_gpio2 23 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	/* Type-A port on J53 */
+	reg_usb_a_vbus0: regulator-usb-a-vbus0 {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&cp0_reg_usb_a_vbus0_pins>;
+		pinctrl-names = "default";
+		regulator-name = "vbus0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpios = <&cp0_gpio1 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb_a_vbus1: regulator-usb-a-vbus1 {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&cp0_reg_usb_a_vbus1_pins>;
+		pinctrl-names = "default";
+		regulator-name = "vbus1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpios = <&cp0_gpio1 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	sfp0: sfp-0 {
+		compatible = "sff,sfp";
+		pinctrl-0 = <&cp0_sfp0_pins>;
+		pinctrl-names = "default";
+		i2c-bus = <&cp0_i2c1>;
+		los-gpios = <&cp0_gpio2 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp0_gpio2 1 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp0_gpio1 31 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp1: sfp-1 {
+		compatible = "sff,sfp";
+		pinctrl-0 = <&cp1_sfp1_pins>;
+		pinctrl-names = "default";
+		i2c-bus = <&cp1_i2c1>;
+		los-gpios = <&cp1_gpio2 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp1_gpio2 18 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp1_gpio2 1 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp1_gpio2 17 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* SRDS #2 - SFP+ 10GE */
+&cp0_eth0 {
+	managed = "in-band-status";
+	phy-mode = "10gbase-r";
+	phys = <&cp0_comphy2 0>;
+	sfp = <&sfp0>;
+	status = "okay";
+};
+
+/* SRDS #3 - SGMII 1GE */
+&cp0_eth1 {
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	/* Without mdio phy access rely on sgmii auto-negotiation. */
+	phys = <&cp0_comphy3 1>;
+	status = "okay";
+};
+
+/* SRDS #1 - SGMII */
+&cp0_eth2 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phy = <&cp0_phy1>;
+	phys = <&cp0_comphy1 2>;
+};
+
+&cp0_gpio1 {
+	pcie0-0-w-disable-hog {
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "pcie0.0-w-disable";
+	};
+
+	/* J34 */
+	m2-full-card-power-off-hog {
+		gpio-hog;
+		gpios = <8 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-full-card-power-off";
+	};
+};
+
+&cp0_i2c0 {
+	/* assembly option */
+	fan-controller@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+	};
+
+	expander0: gpio@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+
+		usb-a-vbus0-ilimit-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "vbus0-ilimit";
+		};
+
+		/* duplicate connection, controlled by soc gpio */
+		usb-vbus0-enable-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "vbus0-enable";
+		};
+
+		usb-a-vbus1-ilimit-hog {
+			gpio-hog;
+			gpios = <2 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "vbus1-ilimit";
+		};
+
+		/* duplicate connection, controlled by soc gpio */
+		usb-vbus1-enable-hog {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "vbus1-enable";
+		};
+	};
+
+	carrier_eeprom: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <8>;
+	};
+
+	/* usb-hub@60 */
+
+	/* assembly option */
+	carrier_rtc: rtc@68 {
+		compatible = "st,m41t83";
+		reg = <0x68>;
+		pinctrl-0 = <&cp1_rtc_pins>;
+		pinctrl-names = "default";
+		interrupt-parent = <&cp1_gpio1>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&cp1_gpio1 13 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cp0_i2c1 {
+	/*
+	 * Routed to SFP.
+	 * Limit to 100kHz for compatibility with SFP modules,
+	 * featuring AT24C01A/02/04 at addresses 0x50/0x51.
+	 */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cp0_mdio {
+	/*
+	 * SoM + Carrier each have a PHY at address 0.
+	 * Remove the SoM phy node, and skip adding the carrier node.
+	 * SGMII Auto-Negotation is enabled by bootloader for
+	 * autonomous operation without mdio control.
+	 */
+	/delete-node/ ethernet-phy@0;
+
+	/* U17016 */
+	cp0_phy1: ethernet-phy@1 {
+		reg = <1>;
+		/*
+		 * Configure LEDs default behaviour:
+		 * - LED[0]: link is 1000Mbps: On (yellow)
+		 * - LED[1]: link/activity: On/blink (green)
+		 * - LED[2]: high impedance (floating)
+		 */
+		marvell,reg-init = <3 16 0xf000 0x0a17>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+/* SRDS #0 - miniPCIe */
+&cp0_pcie0 {
+	num-lanes = <1>;
+	phys = <&cp0_comphy0 0>;
+	status = "okay";
+};
+
+/* SRDS #5 - M.2 B-Key (J34) */
+&cp0_pcie2 {
+	num-lanes = <1>;
+	phys = <&cp0_comphy5 2>;
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	pinctrl-0 = <&cp0_m2_0_shutdown_pins &cp0_mpcie_rfkill_pins>;
+	pinctrl-names = "default";
+
+	cp0_i2c1_pins: cp0-i2c1-pins {
+		marvell,pins = "mpp35", "mpp36";
+		marvell,function = "i2c1";
+	};
+
+	cp0_led_pins: cp0-led-pins {
+		marvell,pins = "mpp4", "mpp7";
+		marvell,function = "gpio";
+	};
+
+	cp0_m2_0_shutdown_pins: cp0-m2-0-shutdown-pins {
+		marvell,pins = "mpp8";
+		marvell,function = "gpio";
+	};
+
+	cp0_mmc0_pins: cp0-mmc0-pins {
+		marvell,pins = "mpp43", "mpp56", "mpp57", "mpp58",
+			       "mpp59", "mpp60", "mpp61";
+		marvell,function = "sdio";
+	};
+
+	cp0_mpcie_rfkill_pins: cp0-mpcie-rfkill-pins {
+		marvell,pins = "mpp6";
+		marvell,function = "gpio";
+	};
+
+	cp0_reg_usb_a_vbus0_pins: cp0-reg-usb-a-vbus0-pins {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+
+	cp0_reg_usb_a_vbus1_pins: cp0-reg-usb-a-vbus1-pins {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	cp0_sfp0_pins: cp0-sfp0-pins {
+		marvell,pins = "mpp31", "mpp32", "mpp33", "mpp34";
+		marvell,function = "gpio";
+	};
+
+	cp0_spi1_cs1_pins: cp0-spi1-cs1-pins {
+		marvell,pins = "mpp12";
+		marvell,function = "spi1";
+	};
+};
+
+/* microSD */
+&cp0_sdhci0 {
+	pinctrl-0 = <&cp0_mmc0_pins>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&cp0_spi1 {
+	/* add pin for chip-select 1 */
+	pinctrl-0 = <&cp0_spi1_pins &cp0_spi1_cs1_pins>;
+
+	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		/* read command supports max. 50MHz */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+/* USB-2.0 Host to USB-Hub */
+&cp0_usb3_0 {
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SRDS #4 - USB-3.0 Host to USB-Hub */
+&cp0_usb3_1 {
+	phys = <&cp0_comphy4 1>, <&cp0_utmi1>;
+	phy-names = "comphy", "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+&cp0_utmi1 {
+	status = "disabled";
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* SRDS #4 - SFP+ 10GE */
+&cp1_eth0 {
+	managed = "in-band-status";
+	phy-mode = "10gbase-r";
+	phys = <&cp1_comphy4 0>;
+	sfp = <&sfp1>;
+	status = "okay";
+};
+
+/* SRDS #3 - SGMII 1GE */
+&cp1_eth1 {
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phy = <&cp1_phy0>;
+	phys = <&cp1_comphy3 1>;
+	status = "okay";
+};
+
+/* SRDS #5 - SGMII 1GE */
+&cp1_eth2 {
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phy = <&cp1_phy1>;
+	phys = <&cp1_comphy5 2>;
+	status = "okay";
+};
+
+&cp1_gpio1 {
+	status = "okay";
+
+	/* J30 */
+	m2-full-card-power-off-hog-0 {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-full-card-power-off";
+	};
+
+	/* J44 */
+	m2-full-card-power-off-hog-1 {
+		gpio-hog;
+		gpios = <30 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-full-card-power-off";
+	};
+};
+
+&cp1_gpio2 {
+	status = "okay";
+};
+
+&cp1_i2c1 {
+	/*
+	 * Routed to SFP.
+	 * Limit to 100kHz for compatibility with SFP modules,
+	 * featuring AT24C01A/02/04 at addresses 0x50/0x51.
+	 */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&cp1_i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cp1_mdio {
+	pinctrl-0 = <&cp1_mdio_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	cp1_phy0: ethernet-phy@0 {
+		reg = <0>;
+		/*
+		 * Configure LEDs default behaviour:
+		 * - LED[0]: link is 1000Mbps: On (yellow)
+		 * - LED[1]: link/activity: On/blink (green)
+		 * - LED[2]: high impedance (floating)
+		 */
+		marvell,reg-init = <3 16 0xf000 0x0a17>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+
+	cp1_phy1: ethernet-phy@1 {
+		reg = <1>;
+		/*
+		 * Configure LEDs default behaviour:
+		 * - LED[0]: link is 1000Mbps: On (yellow)
+		 * - LED[1]: link/activity: On/blink (green)
+		 * - LED[2]: high impedance (floating)
+		 */
+		marvell,reg-init = <3 16 0xf000 0x0a17>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+/* SRDS #0 - M.2 (J30) */
+&cp1_pcie0 {
+	num-lanes = <1>;
+	phys = <&cp1_comphy0 0>;
+	status = "okay";
+};
+
+&cp1_rtc {
+	status = "disabled";
+};
+
+/* SRDS #1 - SATA on M.2 (J44) */
+&cp1_sata0 {
+	status = "okay";
+
+	/* only port 0 is available */
+	sata-port@0 {
+		phys = <&cp1_comphy1 0>;
+		status = "okay";
+	};
+};
+
+&cp1_syscon0 {
+	cp1_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+		pinctrl-0 = <&cp1_m2_1_shutdown_pins &cp1_m2_2_shutdown_pins>;
+		pinctrl-names = "default";
+
+		cp1_i2c1_pins: cp0-i2c1-pins {
+			marvell,pins = "mpp35", "mpp36";
+			marvell,function = "i2c1";
+		};
+
+		cp1_led_pins: cp1-led-pins {
+			marvell,pins = "mpp54", "mpp55";
+			marvell,function = "gpio";
+		};
+
+		cp1_m2_1_shutdown_pins: cp1-m2-1-shutdown-pins {
+			marvell,pins = "mpp29";
+			marvell,function = "gpio";
+		};
+
+		cp1_m2_2_shutdown_pins: cp1-m2-2-shutdown-pins {
+			marvell,pins = "mpp30";
+			marvell,function = "gpio";
+		};
+
+		cp1_mdio_pins: cp1-mdio-pins {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "ge";
+		};
+
+		cp1_rtc_pins: cp1-rtc-pins {
+			marvell,pins = "mpp12", "mpp13";
+			marvell,function = "gpio";
+		};
+
+		cp1_sfp1_pins: cp1-sfp1-pins {
+			marvell,pins = "mpp33", "mpp34", "mpp49", "mpp50";
+			marvell,function = "gpio";
+		};
+	};
+};
+
+/*
+ * SRDS #2 - USB-3.0 Host to M.2 (J44)
+ * USB-2.0 Host to M.2 (J30)
+ */
+&cp1_usb3_0 {
+	phys = <&cp1_comphy2 0>, <&cp1_utmi0>;
+	phy-names = "comphy", "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* USB-2.0 Host to M.2 (J44) */
+&cp1_usb3_1 {
+	phys = <&cp1_utmi1>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp1_utmi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
new file mode 100644
index 000000000000..6f3914bcfd01
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB Com Express CPU module board.
+ */
+
+#include "cn9131-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9131-DB COM EXPRESS type 7 CPU module board";
+	compatible = "marvell,cn9131-cpu-module", "marvell,cn9131", "marvell,cn9130",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+};
+
+&ap0_reg_sd_vccq {
+	regulator-max-microvolt = <1800000>;
+	states = <1800000 0x1 1800000 0x0>;
+	/delete-property/ gpios;
+};
+
+&cp0_reg_usb3_vbus0 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_usb3_vbus1 {
+	/delete-property/ gpio;
+};
+
+&cp1_reg_usb3_vbus0 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_sd_vcc {
+	status = "disabled";
+};
+
+&cp0_reg_sd_vccq {
+	status = "disabled";
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_eth0 {
+	status = "disabled";
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+	status = "disabled";
+};
+
+&cp0_mdio {
+	status = "okay";
+	pinctrl-0 = <&cp0_ge_mdio_pins>;
+	phy0: ethernet-phy@0 {
+		status = "okay";
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_ge_mdio_pins: ge-mdio-pins {
+			marvell,pins = "mpp40", "mpp41";
+			marvell,function = "ge";
+		};
+	};
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_spi1 {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
+
+&cp1_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp1_usb3_0_phy0>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy3 1>;
+	phy-names = "usb";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
index ff8422fae31b..626042fce7e2 100644
--- a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
@@ -18,7 +18,7 @@
 		ethernet4 = &cp1_eth1;
 	};
 
-	cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 {
+	cp1_reg_usb3_vbus0: regulator-6 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_xhci0_vbus_pins>;
@@ -29,12 +29,12 @@
 		gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp1_usb3_0_phy0: cp1_usb3_phy0 {
+	cp1_usb3_0_phy0: usb-phy-3 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp1_reg_usb3_vbus0>;
 	};
 
-	cp1_sfp_eth1: sfp-eth1 {
+	cp1_sfp_eth1: sfp-eth-2 {
 		compatible = "sff,sfp";
 		i2c-bus = <&cp1_i2c0>;
 		los-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
@@ -127,6 +127,7 @@
 	sata-port@1 {
 		/* Generic PHY, providing serdes lanes */
 		phys = <&cp1_comphy5 1>;
+		status = "okay";
 	};
 };
 
@@ -138,8 +139,6 @@
 	reg = <0x700680 0x50>;
 
 	flash@0 {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		/* On-board MUX does not allow higher frequencies */
diff --git a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
new file mode 100644
index 000000000000..5cf83d8ca1f5
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
@@ -0,0 +1,683 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for SolidRun CN9132 Clearfog.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "cn9130.dtsi"
+#include "cn9132-sr-cex7.dtsi"
+
+/ {
+	model = "SolidRun CN9132 Clearfog";
+	compatible = "solidrun,cn9132-clearfog",
+		     "solidrun,cn9132-sr-cex7", "marvell,cn9130";
+
+	aliases {
+		ethernet1 = &cp0_eth2;
+		ethernet2 = &cp0_eth0;
+		ethernet3 = &cp2_eth0;
+		ethernet4 = &cp1_eth0;
+		i2c7 = &carrier_mpcie_i2c;
+		i2c8 = &carrier_ptp_i2c;
+		mmc1 = &cp0_sdhci0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_wake0_pins>;
+
+		button-0 {
+			label = "SW2";
+			gpios = <&cp1_gpio2 8 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_batlow_pins &cp2_rsvd4_pins>;
+
+		/* LED11 */
+		led-io-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <0>;
+			default-state = "off";
+			gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED12 */
+		led-io-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			default-state = "off";
+			gpios = <&cp2_gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	/* CON4 W_DISABLE1/W_DISABLE2 */
+	rfkill-m2-wlan {
+		compatible = "rfkill-gpio";
+		label = "m.2 wlan (CON4)";
+		radio-type = "wlan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_10g_phy_rst_01_pins>;
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&cp1_gpio2 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* CON5 W_DISABLE1/W_DISABLE2 */
+	rfkill-m2-wlan {
+		compatible = "rfkill-gpio";
+		label = "m.2 wlan (CON5)";
+		radio-type = "wlan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_10g_phy_rst_23_pins>;
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&cp1_gpio2 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* J21 W_DISABLE1 */
+	rfkill-m2-wwan {
+		compatible = "rfkill-gpio";
+		label = "m.2 wwan (J21)";
+		radio-type = "wwan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp2_rsvd3_pins>;
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* J21 W_DISABLE1 */
+	rfkill-m2-gnss {
+		compatible = "rfkill-gpio";
+		label = "m.2 gnss (J21)";
+		radio-type = "gps";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp2_rsvd8_pins>;
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&cp2_gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* J14 W_DISABLE */
+	rfkill-mpcie-wlan {
+		compatible = "rfkill-gpio";
+		label = "mpcie wlan (J14)";
+		radio-type = "wlan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp2_rsvd2_pins>;
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&com_10g_sfp_i2c0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&com_10g_int0_pins>;
+		mod-def0-gpios = <&cp0_gpio1 24 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+&com_smbus {
+	/* This bus is also routed to STM32 BMC Microcontroller (U2) */
+
+	power-sensor@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		#io-channel-cells = <1>;
+		label = "vdd_12v0";
+		shunt-resistor = <2000>;
+	};
+
+	adc@48 {
+		compatible = "ti,tla2021";
+		reg = <0x48>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* supplied by chaoskey hardware noise generator circuit */
+		channel@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&cp0_eth_phy0 {
+	/*
+	 * Configure LEDs default behaviour:
+	 * - LED[0]: link is 1000Mbps: On (yellow): 0111
+	 * - LED[1]: link/activity: On/Blink (green): 0001
+	 * - LED[2]: Off (green): 1000
+	 */
+	marvell,reg-init = <3 16 0xf000 0x0817>;
+
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			/* link */
+			reg = <0>;
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		led@1 {
+			/* act */
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		led@2 {
+			/* 1000 */
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+	};
+};
+
+/* SRDS #4 - 10GE */
+&cp0_eth0 {
+	phys = <&cp0_comphy4 0>;
+	phy-mode = "10gbase-r";
+	managed = "in-band-status";
+	sfp = <&sfp>;
+	status = "okay";
+};
+
+&cp0_eth2 {
+	phy-mode = "2500base-x";
+	phys = <&cp0_comphy5 2>;
+	status = "okay";
+
+	fixed-link {
+		speed = <2500>;
+		full-duplex;
+		pause;
+	};
+};
+
+&cp0_i2c1 {
+	/*
+	 * Both COM and Carrier Board have a PCA9547 i2c mux at 0x77.
+	 * Describe them as a single device merging each child bus.
+	 */
+
+	i2c-mux@77 {
+		i2c@0 {
+			/* Routed to Full PCIe (J4) */
+		};
+
+		i2c@1 {
+			/* Routed to USB Hub (U29) */
+		};
+
+		i2c@2 {
+			/* Routed to M.2 (CON4) */
+		};
+
+		i2c@3 {
+			/* Routed to M.2 (CON5) */
+		};
+
+		i2c@4 {
+			/* Routed to M.2 (J21) */
+		};
+
+		carrier_mpcie_i2c: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			/* Routed to mini-PCIe (J14) */
+		};
+
+		carrier_ptp_i2c: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			/* Routed to various optional PTP related components */
+		};
+	};
+};
+
+&cp0_mdio {
+	ethernet-switch@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sw_phy1: ethernet-phy@1 {
+				reg = <0x11>;
+			};
+
+			sw_phy2: ethernet-phy@2 {
+				reg = <0x12>;
+			};
+
+			sw_phy3: ethernet-phy@3 {
+				reg = <0x13>;
+			};
+
+			sw_phy4: ethernet-phy@4 {
+				reg = <0x14>;
+			};
+		};
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-handle = <&sw_phy1>;
+				phy-mode = "internal";
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_YELLOW>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-handle = <&sw_phy2>;
+				phy-mode = "internal";
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_YELLOW>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-handle = <&sw_phy3>;
+				phy-mode = "internal";
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_YELLOW>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@4 {
+				reg = <4>;
+				label = "lan4";
+				phy-handle = <&sw_phy4>;
+				phy-mode = "internal";
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_YELLOW>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&cp0_eth2>;
+				phy-mode = "2500base-x";
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+	};
+};
+
+/* SRDS #0,#1,#2,#3 - PCIe */
+&cp0_pcie0 {
+	num-lanes = <4>;
+	/*
+	 * The mvebu-comphy driver does not currently know how to pass correct
+	 * lane-count to ATF while configuring the serdes lanes.
+	 * Rely on bootloader configuration only.
+	 *
+	 * phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>;
+	 */
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	/*
+	 * configure unused gpios exposed via pin headers:
+	 * - J7-10: PWRBTN
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_pwrbtn_pins>;
+};
+
+/* microSD */
+&cp0_sdhci0 {
+	pinctrl-0 = <&cp0_mmc0_pins>, <&cp0_mmc0_cd_pins>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&cp0_spi1 {
+	/* add CS1 */
+	pinctrl-0 = <&cp0_spi1_pins>, <&cp0_spi1_cs1_pins>;
+
+	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		/* read command supports max. 50MHz */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+/* J38 */
+&cp0_uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_uart2_pins>;
+	status = "okay";
+};
+
+&cp0_utmi {
+	/* M.2 "CON5" swaps D+/D- */
+	swap-dx-lanes = <1>;
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* SRDS #2 - 5GE */
+&cp1_eth0 {
+	phys = <&cp1_comphy2 0>;
+	phy-mode = "5gbase-r";
+	phy = <&cp1_eth_phy0>;
+	managed = "in-band-status";
+	status = "okay";
+};
+
+/* SRDS #0,#1 - PCIe */
+&cp1_pcie0 {
+	num-lanes = <2>;
+	/*
+	 * The mvebu-comphy driver does not currently know how to pass correct
+	 * lane-count to ATF while configuring the serdes lanes.
+	 * Rely on bootloader configuration only.
+	 *
+	 * phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>;
+	 */
+	status = "okay";
+};
+
+/* SRDS #4 - PCIe */
+&cp1_pcie1 {
+	num-lanes = <1>;
+	phys = <&cp1_comphy4 1>;
+	status = "okay";
+};
+
+/* SRDS #5 - PCIe */
+&cp1_pcie2 {
+	num-lanes = <1>;
+	phys = <&cp1_comphy5 2>;
+	status = "okay";
+};
+
+&cp1_pinctrl {
+	/*
+	 * configure unused gpios exposed via pin headers:
+	 * - J7-8: RSVD16
+	 * - J7-10: THRM
+	 * - J10-1: WAKE1
+	 * - J10-2: SATA_ACT
+	 * - J10-8: THERMTRIP
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_rsvd16_pins &cp1_sata_act_pins &cp1_thrm_irq_pins>,
+		    <&cp1_thrm_trip_pins &cp1_wake1_pins>;
+};
+
+/* SRDS #3 - SATA */
+&cp1_sata0 {
+	status = "okay";
+
+	/* only port 1 is available */
+	sata-port@1 {
+		phys = <&cp1_comphy3 1>;
+		status = "okay";
+	};
+};
+
+&cp1_utmi {
+	/* M.2 "CON4" swaps D+/D- */
+	swap-dx-lanes = <0>;
+};
+
+&cp1_xmdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_xmdio_pins>;
+	status = "okay";
+
+	cp1_eth_phy0: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&com_10g_int1_pins>;
+		interrupt-parent = <&cp1_gpio2>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+&cp2_ethernet {
+	status = "okay";
+};
+
+/* SRDS #2 - 5GE */
+&cp2_eth0 {
+	phys = <&cp2_comphy2 0>;
+	phy-mode = "5gbase-r";
+	phy = <&cp2_eth_phy0>;
+	managed = "in-band-status";
+	status = "okay";
+};
+
+&cp2_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2_rsvd9_pins>;
+
+	/* J21 */
+	m2-wwan-reset-hog {
+		gpio-hog;
+		gpios = <9 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		output-low;
+		line-name = "m2-wwan-reset";
+	};
+};
+
+/* SRDS #0 - PCIe */
+&cp2_pcie0 {
+	num-lanes = <1>;
+	phys = <&cp2_comphy0 0>;
+	status = "okay";
+};
+
+/* SRDS #4 - PCIe */
+&cp2_pcie1 {
+	num-lanes = <1>;
+	phys = <&cp2_comphy4 1>;
+	status = "okay";
+};
+
+/* SRDS #5 - PCIe */
+&cp2_pcie2 {
+	num-lanes = <1>;
+	phys = <&cp2_comphy5 2>;
+	status = "okay";
+};
+
+&cp2_pinctrl {
+	/*
+	 * configure unused gpios exposed via pin headers:
+	 * - J7-1: RSVD10
+	 * - J7-3: RSVD11
+	 * - J7-5: RSVD56
+	 * - J7-6: RSVD7
+	 * - J7-7: RSVD27
+	 * - J10-3: RSVD31
+	 * - J10-5: RSVD5
+	 * - J10-6: RSVD32
+	 * - J10-7: RSVD0
+	 * - J10-9: RSVD1
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2_rsvd0_pins &cp2_rsvd1_pins &cp2_rsvd5_pins>,
+		    <&cp2_rsvd7_pins &cp2_rsvd10_pins &cp2_rsvd11_pins>,
+		    <&cp2_rsvd27_pins &cp2_rsvd31_pins &cp2_rsvd32_pins>,
+		    <&cp2_rsvd56_pins>;
+};
+
+/* SRDS #3 - SATA */
+&cp2_sata0 {
+	status = "okay";
+
+	/* only port 1 is available */
+	sata-port@1 {
+		status = "okay";
+		phys = <&cp2_comphy3 1>;
+	};
+};
+
+&cp2_xmdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2_xmdio_pins>;
+	status = "okay";
+
+	cp2_eth_phy0: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&com_10g_int2_pins>;
+		interrupt-parent = <&cp2_gpio2>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
index 512a4fa2861e..f91fc69905b8 100644
--- a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
@@ -17,7 +17,7 @@
 		ethernet5 = &cp2_eth0;
 	};
 
-	cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
+	cp2_reg_usb3_vbus0: regulator-7 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp2-xhci0-vbus";
 		regulator-min-microvolt = <5000000>;
@@ -26,12 +26,12 @@
 		gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp2_usb3_0_phy0: cp2_usb3_phy0 {
+	cp2_usb3_0_phy0: usb-phy-4 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp2_reg_usb3_vbus0>;
 	};
 
-	cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
+	cp2_reg_usb3_vbus1: regulator-8 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp2-xhci1-vbus";
 		regulator-min-microvolt = <5000000>;
@@ -40,12 +40,12 @@
 		gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp2_usb3_0_phy1: cp2_usb3_phy1 {
+	cp2_usb3_0_phy1: usb-phy-5 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp2_reg_usb3_vbus1>;
 	};
 
-	cp2_reg_sd_vccq: cp2_sd_vccq@0 {
+	cp2_reg_sd_vccq: regulator-9 {
 		compatible = "regulator-gpio";
 		regulator-name = "cp2_sd_vcc";
 		regulator-min-microvolt = <1800000>;
@@ -54,7 +54,7 @@
 		states = <1800000 0x1 3300000 0x0>;
 	};
 
-	cp2_sfp_eth0: sfp-eth0 {
+	cp2_sfp_eth0: sfp-eth-3 {
 		compatible = "sff,sfp";
 		i2c-bus = <&cp2_sfpp0_i2c>;
 		los-gpios = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
@@ -175,6 +175,7 @@
 	sata-port@0 {
 		/* Generic PHY, providing serdes lanes */
 		phys = <&cp2_comphy2 0>;
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi b/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
new file mode 100644
index 000000000000..91ba5f7dc9b4
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
@@ -0,0 +1,720 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/*
+ * Instantiate the first external CP115
+ */
+
+#define CP11X_NAME		cp1
+#define CP11X_BASE		f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f4600000
+#define CP11X_PCIE1_BASE	f4620000
+#define CP11X_PCIE2_BASE	f4640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+/*
+ * Instantiate the second external CP115
+ */
+
+#define CP11X_NAME		cp2
+#define CP11X_BASE		f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f6600000
+#define CP11X_PCIE1_BASE	f6620000
+#define CP11X_PCIE2_BASE	f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+/ {
+	model = "SolidRun CN9132 COM Express Type 7 Module";
+	compatible = "solidrun,cn9132-sr-cex7", "marvell,cn9130";
+
+	aliases {
+		ethernet0 = &cp0_eth1;
+		gpio3 = &cp1_gpio1;
+		gpio4 = &cp1_gpio2;
+		gpio5 = &cp2_gpio1;
+		gpio6 = &cp2_gpio2;
+		i2c0 = &cp0_i2c0;
+		i2c1 = &cp0_i2c1;
+		i2c2 = &com_clkgen_i2c;
+		i2c3 = &com_10g_led_i2c;
+		i2c4 = &com_10g_sfp_i2c0;
+		i2c5 = &com_smbus;
+		i2c6 = &com_fanctrl_i2c;
+		mmc0 = &ap_sdhci0;
+		rtc0 = &cp0_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 51 102 153 204 255>;
+		#cooling-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_fan_pwm_pins &cp0_fan_tacho_pins>;
+		pwms = <&cp0_gpio2 7 40000>;
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	v_1_8: regulator-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	ap_vhv: regulator-ap-vhv-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "ap-vhv-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-0 = <&cp0_reg_ap_vhv_pins>;
+		pinctrl-names = "default";
+		gpios = <&cp0_gpio2 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cp_vhv: regulator-cp-vhv-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp-vhv-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-0 = <&cp0_reg_cp_vhv_pins>;
+		pinctrl-names = "default";
+		gpios = <&cp0_gpio2 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&ap_pinctrl {
+	ap_mmc0_pins: ap-mmc0-pins {
+		marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", "mpp4", "mpp5",
+					   "mpp6", "mpp7", "mpp8", "mpp9", "mpp10", "mpp12";
+		marvell,function = "sdio";
+		/*
+		 * mpp12 is emmc reset, function should be sdio (hw_rst),
+		 * but pinctrl-mvebu does not support this.
+		 *
+		 * From pinctrl-mvebu.h:
+		 * "The name will be used to switch to this setting in DT description, e.g.
+		 * marvell,function = "uart2". subname is only for debugging purposes."
+		 */
+	};
+};
+
+&ap_sdhci0 {
+	bus-width = <8>;
+	pinctrl-0 = <&ap_mmc0_pins>;
+	pinctrl-names = "default";
+	vqmmc-supply = <&v_1_8>;
+	/*
+	 * Not stable in HS modes - phy needs "more calibration", so disable
+	 * UHS (by preventing voltage switch), SDR104, SDR50 and DDR50 modes.
+	 */
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&ap_thermal_ic {
+	polling-delay = <1000>;
+
+	trips {
+		ap_active: trip-active {
+			temperature = <40000>;
+			hysteresis = <4000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&ap_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+		};
+
+		map1 {
+			trip = <&ap_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_eth1_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&cp0_eth_phy0>;
+	status = "okay";
+};
+
+&cp0_gpio1 {
+	status = "okay";
+
+	/*
+	 * Tacho signal used as interrupt source by pwm-fan driver.
+	 * Hog IO as input to ensure mvebu-gpio irq driver`s
+	 * irq_set_type can succeed.
+	 */
+	pwm-tacho-irq-hog {
+		gpio-hog;
+		gpios = <26 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		input;
+		line-name = "fan-tacho";
+	};
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	com_eeprom: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,spd";
+		reg = <0x53>;
+	};
+};
+
+&cp0_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		com_clkgen_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			/* clock-controller@6b */
+		};
+
+		com_10g_led_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			/* Routed to B2B Connector as I2C_10G_LED_SCL/SDA */
+		};
+
+		com_10g_sfp_i2c0: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			/* Routed to B2B Connector as I2C_SFP0_CP0_SCL/SDA */
+		};
+
+		com_smbus: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			/* Routed to B2B Connector as SBM_CLK/DAT */
+		};
+
+		com_fanctrl_i2c: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			/* fan-controller@2f (assembly option) */
+		};
+	};
+};
+
+&cp0_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_mdio_pins>;
+	status = "okay";
+
+	cp0_eth_phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cp0_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi1_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		/* read command supports max. 50MHz */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		com_10g_int0_pins: cp0-10g-int-pins {
+			marvell,pins = "mpp24";
+			marvell,function = "gpio";
+		};
+
+		cp0_eth1_pins: cp0-eth1-pins {
+			marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+				       "mpp4", "mpp5", "mpp6", "mpp7",
+				       "mpp8", "mpp9", "mpp10", "mpp11";
+			/* docs call it "ge1", but cp110-pinctrl "ge0" */
+			marvell,function = "ge0";
+		};
+
+		cp0_fan_pwm_pins: cp0-fan-pwm-pins {
+			marvell,pins = "mpp39";
+			marvell,function = "gpio";
+		};
+
+		cp0_fan_tacho_pins: cp0-fan-tacho-pins {
+			marvell,pins = "mpp26";
+			marvell,function = "gpio";
+		};
+
+		cp0_i2c0_pins: cp0-i2c0-pins {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+
+		cp0_i2c1_pins: cp0-i2c1-pins {
+			marvell,pins = "mpp35", "mpp36";
+			marvell,function = "i2c1";
+		};
+
+		cp0_mdio_pins: cp0-mdio-pins {
+			marvell,pins = "mpp40", "mpp41";
+			marvell,function = "ge";
+		};
+
+		cp0_mmc0_pins: cp0-mmc0-pins {
+			marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59",
+				       "mpp60", "mpp61";
+			marvell,function = "sdio";
+		};
+
+		cp0_mmc0_cd_pins: cp0-mmc0-cd-pins {
+			marvell,pins = "mpp55";
+			marvell,function = "sdio_cd";
+		};
+
+		cp0_pwrbtn_pins:  cp0-pwrbtn-pins {
+			marvell,pins = "mpp31";
+			marvell,function = "gpio";
+		};
+
+		cp0_reg_ap_vhv_pins: cp0-reg-ap-vhv-pins {
+			marvell,pins = "mpp53";
+			marvell,function = "gpio";
+		};
+
+		cp0_reg_cp_vhv_pins: cp0-reg-cp-vhv-pins {
+			marvell,pins = "mpp49";
+			marvell,function = "gpio";
+		};
+
+		cp0_spi1_pins: cp0-spi1-pins {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+
+		cp0_spi1_cs1_pins: cp0-spi1-cs1-pins {
+			marvell,pins = "mpp12";
+			marvell,function = "spi1";
+		};
+
+		cp0_uart2_pins: cp0-uart2-pins  {
+			marvell,pins = "mpp50", "mpp51";
+			marvell,function = "uart2";
+		};
+	};
+};
+
+&cp0_thermal_ic {
+	polling-delay = <1000>;
+
+	trips {
+		cp0_active: trip-active {
+			temperature = <40000>;
+			hysteresis = <4000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cp0_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+		};
+
+		map1 {
+			trip = <&cp0_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+/* USB-2.0 Host */
+&cp0_usb3_0 {
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* USB-2.0 Host */
+&cp0_usb3_1 {
+	phys = <&cp0_utmi1>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+&cp1_gpio1 {
+	status = "okay";
+};
+
+&cp1_gpio2 {
+	status = "okay";
+};
+
+&cp1_rtc {
+	status = "disabled";
+};
+
+&cp1_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_spi1_pins>;
+	status = "okay";
+
+	tpm@0 {
+		reg = <0>;
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		spi-max-frequency = <10000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_tpm_irq_pins>;
+		interrupt-parent = <&cp1_gpio1>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&cp1_syscon0 {
+	cp1_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		com_10g_int1_pins: cp1-10g-int-pins {
+			marvell,pins = "mpp50";
+			marvell,function = "gpio";
+		};
+
+		cp1_10g_phy_rst_01_pins: cp1-10g-phy-rst-01-pins {
+			marvell,pins = "mpp43";
+			marvell,function = "gpio";
+		};
+
+		cp1_10g_phy_rst_23_pins: cp1-10g-phy-rst-23-pins {
+			marvell,pins = "mpp42";
+			marvell,function = "gpio";
+		};
+
+		cp1_batlow_pins: cp1-batlow-pins {
+			marvell,pins = "mpp11";
+			marvell,function = "gpio";
+		};
+
+		cp1_rsvd16_pins: cp1-rsvd16-pins {
+			marvell,pins = "mpp29";
+			marvell,function = "gpio";
+		};
+
+		cp1_sata_act_pins: cp1-sata-act-pins {
+			marvell,pins = "mpp39";
+			marvell,function = "gpio";
+		};
+
+		cp1_spi1_pins: cp1-spi1-pins {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+
+		cp1_thrm_irq_pins: cp1-thrm-irq-pins {
+			marvell,pins = "mpp34";
+			marvell,function = "gpio";
+		};
+
+		cp1_thrm_trip_pins: cp1-thrm-trip-pins {
+			marvell,pins = "mpp33";
+			marvell,function = "gpio";
+		};
+
+		cp1_tpm_irq_pins: cp1-tpm-irq-pins {
+			marvell,pins = "mpp17";
+			marvell,function = "gpio";
+		};
+
+		cp1_wake0_pins: cp1-wake0-pins {
+			marvell,pins = "mpp40";
+			marvell,function = "gpio";
+		};
+
+		cp1_wake1_pins: cp1-wake1-pins {
+			marvell,pins = "mpp51";
+			marvell,function = "gpio";
+		};
+
+		cp1_xmdio_pins: cp1-xmdio-pins {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "xg";
+		};
+	};
+};
+
+&cp1_thermal_ic {
+	polling-delay = <1000>;
+
+	trips {
+		cp1_active: trip-active {
+			temperature = <40000>;
+			hysteresis = <4000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cp1_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+		};
+
+		map1 {
+			trip = <&cp1_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+/* USB-2.0 Host */
+&cp1_usb3_0 {
+	phys = <&cp1_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp1_utmi {
+	status = "okay";
+};
+
+&cp2_ethernet {
+	status = "okay";
+};
+
+&cp2_gpio1 {
+	status = "okay";
+};
+
+&cp2_gpio2 {
+	status = "okay";
+};
+
+&cp2_rtc {
+	status = "disabled";
+};
+
+&cp2_syscon0 {
+	cp2_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		com_10g_int2_pins: cp2-10g-int-pins {
+			marvell,pins = "mpp50";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd0_pins: cp2-rsvd0-pins {
+			marvell,pins = "mpp0";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd1_pins: cp2-rsvd1-pins {
+			marvell,pins = "mpp1";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd2_pins: cp2-rsvd2-pins {
+			marvell,pins = "mpp2";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd3_pins: cp2-rsvd3-pins {
+			marvell,pins = "mpp3";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd4_pins: cp2-rsvd4-pins {
+			marvell,pins = "mpp4";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd5_pins: cp2-rsvd5-pins {
+			marvell,pins = "mpp54";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd7_pins: cp2-rsvd7-pins {
+			marvell,pins = "mpp7";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd8_pins: cp2-rsvd8-pins {
+			marvell,pins = "mpp8";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd9_pins: cp2-rsvd9-pins {
+			marvell,pins = "mpp9";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd10_pins: cp2-rsvd10-pins {
+			marvell,pins = "mpp10";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd11_pins: cp2-rsvd11-pins {
+			marvell,pins = "mpp11";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd27_pins: cp2-rsvd27-pins {
+			marvell,pins = "mpp11";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd31_pins: cp2-rsvd31-pins {
+			marvell,pins = "mpp31";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd32_pins: cp2-rsvd32-pins {
+			marvell,pins = "mpp32";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd55_pins: cp2-rsvd55-pins {
+			marvell,pins = "mpp55";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd56_pins: cp2-rsvd56-pins {
+			marvell,pins = "mpp56";
+			marvell,function = "gpio";
+		};
+
+		cp2_xmdio_pins: cp2-xmdio-pins {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "xg";
+		};
+	};
+};
+
+&cp2_thermal_ic {
+	polling-delay = <1000>;
+
+	trips {
+		cp2_active: trip-active {
+			temperature = <40000>;
+			hysteresis = <4000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cp2_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+		};
+
+		map1 {
+			trip = <&cp2_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+/* USB-2.0/3.0 Host */
+&cp2_usb3_0 {
+	phys = <&cp2_utmi0>, <&cp2_comphy1 0>;
+	phy-names = "utmi", "comphy";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp2_utmi {
+	status = "okay";
+};
+
+/* AP default console */
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/mmp/Makefile b/arch/arm64/boot/dts/marvell/mmp/Makefile
new file mode 100644
index 000000000000..103175ed63b0
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/mmp/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MMP) += pxa1908-samsung-coreprimevelte.dtb
diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts
new file mode 100644
index 000000000000..47a4f01a7077
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "pxa1908.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "Samsung Galaxy Core Prime VE LTE";
+	compatible = "samsung,coreprimevelte", "marvell,pxa1908";
+
+	aliases {
+		mmc0 = &sdh2; /* eMMC */
+		mmc1 = &sdh0; /* SD card */
+		serial0 = &uart0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0:115200n8";
+
+		fb0: framebuffer@17177000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x17177000 0 (480 * 800 * 4)>;
+			width = <480>;
+			height = <800>;
+			stride = <(480 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	/* Bootloader fills this in */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0 0 0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@17000000 {
+			reg = <0 0x17000000 0 0x1800000>;
+			no-map;
+		};
+
+		gpu@9000000 {
+			reg = <0 0x9000000 0 0x1000000>;
+		};
+
+		/* Communications processor, aka modem */
+		cp@5000000 {
+			reg = <0 0x5000000 0 0x3000000>;
+		};
+
+		cm3@a000000 {
+			reg = <0 0xa000000 0 0x80000>;
+		};
+
+		seclog@8000000 {
+			reg = <0 0x8000000 0 0x100000>;
+		};
+
+		ramoops@8100000 {
+			compatible = "ramoops";
+			reg = <0 0x8100000 0 0x40000>;
+			record-size = <0x8000>;
+			console-size = <0x20000>;
+			max-reason = <5>;
+		};
+	};
+
+	i2c-muic {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio 30 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio 29 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <3>;
+		i2c-gpio,timeout-ms = <100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_muic_pins>;
+
+		muic: extcon@14 {
+			compatible = "siliconmitus,sm5504-muic";
+			reg = <0x14>;
+			interrupt-parent = <&gpio>;
+			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+		autorepeat;
+
+		key-home {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio 50 GPIO_ACTIVE_LOW>;
+		};
+
+		key-volup {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+
+		key-voldown {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&smmu {
+	status = "okay";
+};
+
+&pmx {
+	pinctrl-single,gpio-range = <&range 55 55 0>,
+				    <&range 110 32 0>,
+				    <&range 52 1 0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&board_pins_0 &board_pins_1 &board_pins_2>;
+
+	board_pins_0: board-pins-0 {
+		pinctrl-single,pins = <
+			0x160 0
+			0x164 0
+			0x168 0
+			0x16c 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	board_pins_1: board-pins-1 {
+		pinctrl-single,pins = <
+			0x44 1
+			0x48 1
+			0x20 1
+			0x18 1
+			0x14 1
+			0x10 1
+			0xc 1
+			0x8 1
+			0x68 1
+			0x58 0
+			0x54 0
+			0x7c 0
+			0x6c 0
+			0x70 0
+			0x4c 1
+			0x50 1
+			0xac 0
+			0x90 0
+			0x8c 0
+			0x88 0
+			0x84 0
+			0xc8 0
+			0x128 0
+			0x190 0
+			0x194 0
+			0x1a0 0
+			0x114 0
+			0x118 0
+			0x1d8 0
+			0x1e4 0
+			0xe8 0
+			0x100 0
+			0x204 0
+			0x210 0
+			0x218 0
+		>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xc000>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	board_pins_2: board-pins-2 {
+		pinctrl-single,pins = <
+			0x260 0
+			0x264 0
+			0x268 0
+			0x26c 0
+			0x270 0
+			0x274 0
+			0x78 0
+			0x74 0
+			0xb0 1
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	uart0_pins: uart0-pins {
+		pinctrl-single,pins = <
+			0x198 6
+			0x19c 6
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	gpio_keys_pins: gpio-keys-pins {
+		pinctrl-single,pins = <
+			0x11c 0
+			0x120 0
+			0x1a4 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa0000 0x8000 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	i2c_muic_pins: i2c-muic-pins {
+		pinctrl-single,pins = <
+			0x154 0
+			0x150 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	sdh0_pins_0: sdh0-pins-0 {
+		pinctrl-single,pins = <
+			0x108 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh0_pins_1: sdh0-pins-1 {
+		pinctrl-single,pins = <
+			0x94 0
+			0x98 0
+			0x9c 0
+			0xa0 0
+			0xa4 0
+		>;
+		pinctrl-single,drive-strength = <0x800 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh0_pins_2: sdh0-pins-2 {
+		pinctrl-single,pins = <
+			0xa8 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x208 0x388>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&twsi0 {
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+};
+
+&twsi2 {
+	status = "okay";
+};
+
+&twsi3 {
+	status = "okay";
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+};
+
+&sdh2 {
+	/* Disabled for now because initialization fails with -ETIMEDOUT. */
+	status = "disabled";
+	bus-width = <8>;
+	non-removable;
+	mmc-ddr-1_8v;
+};
+
+&sdh0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdh0_pins_0 &sdh0_pins_1 &sdh0_pins_2>;
+	cd-gpios = <&gpio 11 0>;
+	cd-inverted;
+	bus-width = <4>;
+	wp-inverted;
+};
diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi
new file mode 100644
index 000000000000..cf2b9109688c
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+/ {
+	model = "Marvell Armada PXA1908";
+	compatible = "marvell,pxa1908";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 3>;
+			enable-method = "psci";
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		smmu: iommu@c0010000 {
+			compatible = "arm,mmu-400";
+			reg = <0 0xc0010000 0 0x10000>;
+			#global-interrupts = <1>;
+			#iommu-cells = <1>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@d1df9000 {
+			compatible = "arm,gic-400";
+			reg = <0 0xd1df9000 0 0x1000>,
+				<0 0xd1dfa000 0 0x2000>,
+				/* The subsequent registers are guesses. */
+				<0 0xd1dfc000 0 0x2000>,
+				<0 0xd1dfe000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apb@d4000000 {
+			compatible = "simple-bus";
+			reg = <0 0xd4000000 0 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xd4000000 0x200000>;
+
+			pdma: dma-controller@0 {
+				compatible = "marvell,pdma-1.0";
+				reg = <0 0x10000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				dma-channels = <30>;
+				#dma-cells = <2>;
+			};
+
+			twsi1: i2c@10800 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x10800 0x64>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_TWSI1>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi0: i2c@11000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x11000 0x64>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_TWSI0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi3: i2c@13800 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x13800 0x64>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_TWSI3>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			apbc: clock-controller@15000 {
+				compatible = "marvell,pxa1908-apbc";
+				reg = <0x15000 0x1000>;
+				#clock-cells = <1>;
+			};
+
+			uart0: serial@17000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0x17000 0x1000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_UART0>;
+				reg-shift = <2>;
+			};
+
+			uart1: serial@18000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0x18000 0x1000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_UART1>;
+				reg-shift = <2>;
+			};
+
+			gpio: gpio@19000 {
+				compatible = "marvell,mmp-gpio";
+				reg = <0x19000 0x800>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&apbc PXA1908_CLK_GPIO>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "gpio_mux";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ranges = <0 0x19000 0x800>;
+
+				gpio@0 {
+					reg = <0x0 0x4>;
+				};
+
+				gpio@4 {
+					reg = <0x4 0x4>;
+				};
+
+				gpio@8 {
+					reg = <0x8 0x4>;
+				};
+
+				gpio@100 {
+					reg = <0x100 0x4>;
+				};
+			};
+
+			pmx: pinmux@1e000 {
+				compatible = "marvell,pxa1908-padconf", "pinconf-single";
+				reg = <0x1e000 0x330>;
+
+				#pinctrl-cells = <1>;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <7>;
+
+				range: gpio-range {
+					#pinctrl-single,gpio-range-cells = <3>;
+				};
+			};
+
+			uart2: serial@36000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0x36000 0x1000>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbcp PXA1908_CLK_UART2>;
+				reg-shift = <2>;
+			};
+
+			twsi2: i2c@37000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x37000 0x64>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbcp PXA1908_CLK_TWSI2>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			apbcp: clock-controller@3b000 {
+				compatible = "marvell,pxa1908-apbcp";
+				reg = <0x3b000 0x1000>;
+				#clock-cells = <1>;
+			};
+
+			mpmu: clock-controller@50000 {
+				compatible = "marvell,pxa1908-mpmu";
+				reg = <0x50000 0x1000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		axi@d4200000 {
+			compatible = "simple-bus";
+			reg = <0 0xd4200000 0 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xd4200000 0x200000>;
+
+			usbphy: phy@7000 {
+				compatible = "marvell,pxa1928-usb-phy";
+				reg = <0x7000 0x200>;
+				clocks = <&apmu PXA1908_CLK_USB>;
+				#phy-cells = <0>;
+			};
+
+			usb: usb@8000 {
+				compatible = "chipidea,usb2";
+				reg = <0x8000 0x200>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_USB>;
+				phys = <&usbphy>;
+				phy-names = "usb-phy";
+			};
+
+			sdh0: mmc@80000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0x80000 0x120>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_SDH0>;
+				clock-names = "io";
+				mrvl,clk-delay-cycles = <31>;
+			};
+
+			sdh1: mmc@80800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0x80800 0x120>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_SDH1>;
+				clock-names = "io";
+				mrvl,clk-delay-cycles = <31>;
+			};
+
+			sdh2: mmc@81000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0x81000 0x120>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_SDH2>;
+				clock-names = "io";
+				mrvl,clk-delay-cycles = <31>;
+			};
+
+			apmu: clock-controller@82800 {
+				compatible = "marvell,pxa1908-apmu";
+				reg = <0x82800 0x400>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index af362a085a02..a4df4c21399e 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -3,12 +3,28 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-sony-xperia-m5.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-cudy-wr3000-v1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-openwrt-one.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-xiaomi-ax3000t.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-acelink-ew-7886cax.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-mini.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sata.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-2g5.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-emmc.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-sd.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
@@ -26,10 +42,16 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel14-sku2.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-juniper-sku16.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kappa.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kenzo.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-makomo-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-makomo-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-pico.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-pico6.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku0.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu-sku22.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-katsu-sku32.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-katsu-sku38.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku16.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku272.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku288.dtb
@@ -37,12 +59,56 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-chinchou-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-chinchou-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-chinchou-sku16.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-magneton-sku393216.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-magneton-sku393217.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-magneton-sku393218.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-ponyta-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-ponyta-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-rusty-sku196608.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-squirtle.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-starmie-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-starmie-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131072.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131073.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262148.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-voltorb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku2.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku3.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku4.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku5.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku6.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku7.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-dojo-r1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8370-genio-510-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-genio-700-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-kontron-3-5-sbc-i1200.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l-8-hd-panel.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
+
+# Device tree overlays support
+DTC_FLAGS_mt7986a-bananapi-bpi-r3 := -@
+DTC_FLAGS_mt7986a-bananapi-bpi-r3-mini := -@
+DTC_FLAGS_mt7988a-bananapi-bpi-r4 := -@
+DTC_FLAGS_mt7988a-bananapi-bpi-r4-2g5 := -@
+DTC_FLAGS_mt8395-radxa-nio-12l := -@
diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index 9b1af9c80130..0449686bd06b 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -11,6 +11,7 @@
 
 / {
 	model = "MediaTek MT2712 evaluation board";
+	chassis-type = "embedded";
 	compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
 
 	aliases {
@@ -26,14 +27,14 @@
 		stdout-path = "serial0:921600n8";
 	};
 
-	cpus_fixed_vproc0: fixedregulator@0 {
+	cpus_fixed_vproc0: regulator-vproc-buck0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vproc_buck0";
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <1000000>;
 	};
 
-	cpus_fixed_vproc1: fixedregulator@1 {
+	cpus_fixed_vproc1: regulator-vproc-buck1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vproc_buck1";
 		regulator-min-microvolt = <1000000>;
@@ -42,15 +43,15 @@
 
 	extcon_usb: extcon_iddig {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
 	};
 
 	extcon_usb1: extcon_iddig1 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb_p0_vbus: regulator@2 {
+	usb_p0_vbus: regulator-usb-p0-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p0_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -59,7 +60,7 @@
 		enable-active-high;
 	};
 
-	usb_p1_vbus: regulator@3 {
+	usb_p1_vbus: regulator-usb-p1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -68,7 +69,7 @@
 		enable-active-high;
 	};
 
-	usb_p2_vbus: regulator@4 {
+	usb_p2_vbus: regulator-usb-p2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p2_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -77,7 +78,7 @@
 		enable-active-high;
 	};
 
-	usb_p3_vbus: regulator@5 {
+	usb_p3_vbus: regulator-usb-p3-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p3_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -114,6 +115,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&eth_default>;
 	pinctrl-1 = <&eth_sleep>;
+	mediatek,mac-wol;
 	status = "okay";
 
 	mdio {
@@ -128,7 +130,7 @@
 };
 
 &pio {
-	eth_default: eth_default {
+	eth_default: eth-default-pins {
 		tx_pins {
 			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>,
 				 <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>,
@@ -136,7 +138,7 @@
 				 <MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0>,
 				 <MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC>,
 				 <MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 		};
 		rx_pins {
 			pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3>,
@@ -150,12 +152,12 @@
 		mdio_pins {
 			pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC>,
 				 <MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			input-enable;
 		};
 	};
 
-	eth_sleep: eth_sleep {
+	eth_sleep: eth-sleep-pins {
 		tx_pins {
 			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>,
 				 <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>,
@@ -181,14 +183,14 @@
 		};
 	};
 
-	usb0_id_pins_float: usb0_iddig {
+	usb0_id_pins_float: usb0-iddig-pins {
 		pins_iddig {
 			pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>;
 			bias-pull-up;
 		};
 	};
 
-	usb1_id_pins_float: usb1_iddig {
+	usb1_id_pins_float: usb1-iddig-pins {
 		pins_iddig {
 			pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>;
 			bias-pull-up;
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 4797537cb368..082672efba0a 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -160,70 +160,70 @@
 		#clock-cells = <0>;
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 		clock-output-names = "clk26m";
 	};
 
-	clk32k: oscillator@1 {
+	clk32k: oscillator-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 		clock-output-names = "clk32k";
 	};
 
-	clkfpc: oscillator@2 {
+	clkfpc: oscillator-50m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 		clock-output-names = "clkfpc";
 	};
 
-	clkaud_ext_i_0: oscillator@3 {
+	clkaud_ext_i_0: oscillator-aud0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <6500000>;
 		clock-output-names = "clkaud_ext_i_0";
 	};
 
-	clkaud_ext_i_1: oscillator@4 {
+	clkaud_ext_i_1: oscillator-aud1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <196608000>;
 		clock-output-names = "clkaud_ext_i_1";
 	};
 
-	clkaud_ext_i_2: oscillator@5 {
+	clkaud_ext_i_2: oscillator-aud2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <180633600>;
 		clock-output-names = "clkaud_ext_i_2";
 	};
 
-	clki2si0_mck_i: oscillator@6 {
+	clki2si0_mck_i: oscillator-i2s0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si0_mck_i";
 	};
 
-	clki2si1_mck_i: oscillator@7 {
+	clki2si1_mck_i: oscillator-i2s1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si1_mck_i";
 	};
 
-	clki2si2_mck_i: oscillator@8 {
+	clki2si2_mck_i: oscillator-i2s2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
 		clock-output-names = "clki2si2_mck_i";
 	};
 
-	clktdmin_mclk_i: oscillator@9 {
+	clktdmin_mclk_i: oscillator-mclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <30000000>;
@@ -249,10 +249,11 @@
 		#clock-cells = <1>;
 	};
 
-	infracfg: syscon@10001000 {
+	infracfg: clock-controller@10001000 {
 		compatible = "mediatek,mt2712-infracfg", "syscon";
 		reg = <0 0x10001000 0 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	pericfg: syscon@10003000 {
@@ -261,16 +262,15 @@
 		#clock-cells = <1>;
 	};
 
-	syscfg_pctl_a: syscfg_pctl_a@10005000 {
+	syscfg_pctl_a: syscon@10005000 {
 		compatible = "mediatek,mt2712-pctl-a-syscfg", "syscon";
 		reg = <0 0x10005000 0 0x1000>;
 	};
 
-	pio: pinctrl@10005000 {
+	pio: pinctrl@1000b000 {
 		compatible = "mediatek,mt2712-pinctrl";
 		reg = <0 0x1000b000 0 0x1000>;
 		mediatek,pctl-regmap = <&syscfg_pctl_a>;
-		pins-are-numbered;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -560,7 +560,7 @@
 		status = "disabled";
 	};
 
-	nandc: nfi@1100e000 {
+	nandc: nand-controller@1100e000 {
 		compatible = "mediatek,mt2712-nfc";
 		reg = <0 0x1100e000 0 0x1000>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
@@ -756,7 +756,7 @@
 		snps,mtl-tx-config = <&mtl_tx_setup>;
 		snps,txpbl = <1>;
 		snps,rxpbl = <1>;
-		clk_csr = <0>;
+		snps,clk-csr = <0>;
 		status = "disabled";
 	};
 
@@ -766,9 +766,9 @@
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&pericfg CLK_PERI_MSDC30_0>,
 			 <&pericfg CLK_PERI_MSDC50_0_HCLK_EN>,
-			 <&pericfg CLK_PERI_MSDC30_0_QTR_EN>,
-			 <&pericfg CLK_PERI_MSDC50_0_EN>;
-		clock-names = "source", "hclk", "bus_clk", "source_cg";
+			 <&pericfg CLK_PERI_MSDC50_0_EN>,
+			 <&pericfg CLK_PERI_MSDC30_0_QTR_EN>;
+		clock-names = "source", "hclk", "source_cg", "bus_clk";
 		status = "disabled";
 	};
 
diff --git a/arch/arm64/boot/dts/mediatek/mt6331.dtsi b/arch/arm64/boot/dts/mediatek/mt6331.dtsi
new file mode 100644
index 000000000000..243afbffa21f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6331.dtsi
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2023 Collabora Ltd.
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+#include <dt-bindings/input/input.h>
+
+&pwrap {
+	pmic: pmic {
+		compatible = "mediatek,mt6331";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		mt6331regulator: regulators {
+			compatible = "mediatek,mt6331-regulator";
+
+			mt6331_vdvfs11_reg: buck-vdvfs11 {
+				regulator-name = "vdvfs11";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1493750>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <0 1>;
+				regulator-always-on;
+			};
+
+			mt6331_vdvfs12_reg: buck-vdvfs12 {
+				regulator-name = "vdvfs12";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1493750>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <0 1>;
+				regulator-always-on;
+			};
+
+			mt6331_vdvfs13_reg: buck-vdvfs13 {
+				regulator-name = "vdvfs13";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1493750>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <0 1>;
+				regulator-always-on;
+			};
+
+			mt6331_vdvfs14_reg: buck-vdvfs14 {
+				regulator-name = "vdvfs14";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1493750>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <0 1>;
+				regulator-always-on;
+			};
+
+			mt6331_vcore2_reg: buck-vcore2 {
+				regulator-name = "vcore2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1493750>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <0 1>;
+				regulator-always-on;
+			};
+
+			mt6331_vio18_reg: buck-vio18 {
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <0 1>;
+				regulator-always-on;
+			};
+
+			mt6331_vtcxo1_reg: ldo-vtcxo1 {
+				regulator-name = "vtcxo1";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_vtcxo2_reg: ldo-vtcxo2 {
+				regulator-name = "vtcxo2";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_avdd32_aud_reg: ldo-avdd32aud {
+				regulator-name = "avdd32_aud";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_vauxa32_reg: ldo-vauxa32 {
+				regulator-name = "vauxa32";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vcama_reg: ldo-vcama {
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vio28_reg: ldo-vio28 {
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_vcamaf_reg: ldo-vcamaf {
+				regulator-name = "vcam_af";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vmc_reg: ldo-vmc {
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vmch_reg: ldo-vmch {
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vemc33_reg: ldo-vemc33 {
+				regulator-name = "vemc33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vgp1_reg: ldo-vgp1 {
+				regulator-name = "vgp1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vsim1_reg: ldo-vsim1 {
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vsim2_reg: ldo-vsim2 {
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vmipi_reg: ldo-vmipi {
+				regulator-name = "vmipi";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vibr_reg: ldo-vibr {
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vgp4_reg: ldo-vgp4 {
+				regulator-name = "vgp4";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vcamd_reg: ldo-vcamd {
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vusb10_reg: ldo-vusb10 {
+				regulator-name = "vusb";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_vcamio_reg: ldo-vcamio {
+				regulator-name = "vcam_io";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vsram_reg: ldo-vsram {
+				regulator-name = "vsram";
+				regulator-min-microvolt = <1012500>;
+				regulator-max-microvolt = <1012500>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_vgp2_reg: ldo-vgp2 {
+				regulator-name = "vgp2";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_vgp3_reg: ldo-vgp3 {
+				regulator-name = "vgp3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vrtc_reg: ldo-vrtc {
+				regulator-name = "vrtc";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vdig18_reg: ldo-vdig18 {
+				regulator-name = "vdig18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+		};
+
+		mt6331rtc: rtc {
+			compatible = "mediatek,mt6331-rtc";
+		};
+
+		mt6331keys: keys {
+			compatible = "mediatek,mt6331-keys";
+			power {
+				linux,keycodes = <KEY_POWER>;
+				wakeup-source;
+			};
+			home {
+				linux,keycodes = <KEY_HOME>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6357.dtsi b/arch/arm64/boot/dts/mediatek/mt6357.dtsi
new file mode 100644
index 000000000000..dca4e5c3d8e2
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6357.dtsi
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ * Copyright (c) 2023 BayLibre Inc.
+ */
+
+#include <dt-bindings/input/input.h>
+
+&pwrap {
+	mt6357_pmic: pmic {
+		compatible = "mediatek,mt6357";
+
+		pmic_adc: adc {
+			compatible = "mediatek,mt6357-auxadc";
+			#io-channel-cells = <1>;
+		};
+
+		regulators {
+			mt6357_vproc_reg: buck-vproc {
+				regulator-name = "vproc";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <220>;
+				regulator-always-on;
+			};
+
+			mt6357_vcore_reg: buck-vcore {
+				regulator-name = "vcore";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <220>;
+				regulator-always-on;
+			};
+
+			mt6357_vmodem_reg: buck-vmodem {
+				regulator-name = "vmodem";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <220>;
+			};
+
+			mt6357_vs1_reg: buck-vs1 {
+				regulator-name = "vs1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <220>;
+				regulator-always-on;
+			};
+
+			mt6357_vpa_reg: buck-vpa {
+				regulator-name = "vpa";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3650000>;
+				regulator-ramp-delay = <50000>;
+				regulator-enable-ramp-delay = <220>;
+			};
+
+			mt6357_vfe28_reg: ldo-vfe28 {
+				regulator-name = "vfe28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vxo22_reg: ldo-vxo22 {
+				regulator-name = "vxo22";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2400000>;
+				regulator-enable-ramp-delay = <110>;
+			};
+
+			mt6357_vrf18_reg: ldo-vrf18 {
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <110>;
+			};
+
+			mt6357_vrf12_reg: ldo-vrf12 {
+				regulator-name = "vrf12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <110>;
+			};
+
+			mt6357_vefuse_reg: ldo-vefuse {
+				regulator-name = "vefuse";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn33_bt_reg: ldo-vcn33-bt {
+				regulator-name = "vcn33-bt";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn33_wifi_reg: ldo-vcn33-wifi {
+				regulator-name = "vcn33-wifi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn28_reg: ldo-vcn28 {
+				regulator-name = "vcn28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn18_reg: ldo-vcn18 {
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcama_reg: ldo-vcama {
+				regulator-name = "vcama";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcamd_reg: ldo-vcamd {
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcamio_reg: ldo-vcamio18 {
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vldo28_reg: ldo-vldo28 {
+				regulator-name = "vldo28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vsram_others_reg: ldo-vsram-others {
+				regulator-name = "vsram-others";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <110>;
+				regulator-always-on;
+			};
+
+			mt6357_vsram_proc_reg: ldo-vsram-proc {
+				regulator-name = "vsram-proc";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <110>;
+				regulator-always-on;
+			};
+
+			mt6357_vaux18_reg: ldo-vaux18 {
+				regulator-name = "vaux18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vaud28_reg: ldo-vaud28 {
+				regulator-name = "vaud28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vio28_reg: ldo-vio28 {
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vio18_reg: ldo-vio18 {
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+				regulator-always-on;
+			};
+
+			mt6357_vdram_reg: ldo-vdram {
+				regulator-name = "vdram";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <3300>;
+			};
+
+			mt6357_vmc_reg: ldo-vmc {
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+			};
+
+			mt6357_vmch_reg: ldo-vmch {
+				regulator-name = "vmch";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+			};
+
+			mt6357_vemc_reg: ldo-vemc {
+				regulator-name = "vemc";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+				regulator-always-on;
+			};
+
+			mt6357_vsim1_reg: ldo-vsim1 {
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vsim2_reg: ldo-vsim2 {
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vibr_reg: ldo-vibr {
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+			};
+
+			mt6357_vusb33_reg: ldo-vusb33 {
+				regulator-name = "vusb33";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+		};
+
+		rtc {
+			compatible = "mediatek,mt6357-rtc";
+		};
+
+		keys {
+			compatible = "mediatek,mt6357-keys";
+
+			key-power {
+				linux,keycodes = <KEY_POWER>;
+				wakeup-source;
+			};
+
+			key-home {
+				linux,keycodes = <KEY_HOME>;
+				wakeup-source;
+			};
+
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
index 98f3b0e0c9f6..e23672a2eea4 100644
--- a/arch/arm64/boot/dts/mediatek/mt6358.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
@@ -5,19 +5,22 @@
 #include <dt-bindings/input/input.h>
 
 &pwrap {
-	pmic: mt6358 {
+	pmic: pmic {
 		compatible = "mediatek,mt6358";
 		interrupt-controller;
-		interrupt-parent = <&pio>;
-		interrupts = <182 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 
-		mt6358codec: mt6358codec {
+		pmic_adc: adc {
+			compatible = "mediatek,mt6358-auxadc";
+			#io-channel-cells = <1>;
+		};
+
+		mt6358codec: audio-codec {
 			compatible = "mediatek,mt6358-sound";
 			mediatek,dmic-mode = <0>; /* two-wires */
 		};
 
-		mt6358regulator: mt6358regulator {
+		mt6358regulator: regulators {
 			compatible = "mediatek,mt6358-regulator";
 
 			mt6358_vdram1_reg: buck_vdram1 {
@@ -128,7 +131,6 @@
 			};
 
 			mt6358_vrf12_reg: ldo_vrf12 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf12";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -136,7 +138,6 @@
 			};
 
 			mt6358_vio18_reg: ldo_vio18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -153,7 +154,6 @@
 			};
 
 			mt6358_vcamio_reg: ldo_vcamio {
-				compatible = "regulator-fixed";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -168,7 +168,6 @@
 			};
 
 			mt6358_vcn18_reg: ldo_vcn18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -176,7 +175,6 @@
 			};
 
 			mt6358_vfe28_reg: ldo_vfe28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vfe28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -193,7 +191,6 @@
 			};
 
 			mt6358_vcn28_reg: ldo_vcn28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -218,7 +215,6 @@
 			};
 
 			mt6358_vxo22_reg: ldo_vxo22 {
-				compatible = "regulator-fixed";
 				regulator-name = "vxo22";
 				regulator-min-microvolt = <2200000>;
 				regulator-max-microvolt = <2200000>;
@@ -234,7 +230,6 @@
 			};
 
 			mt6358_vaux18_reg: ldo_vaux18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaux18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -249,7 +244,6 @@
 			};
 
 			mt6358_vbif28_reg: ldo_vbif28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vbif28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -280,7 +274,6 @@
 			};
 
 			mt6358_vio28_reg: ldo_vio28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -288,7 +281,6 @@
 			};
 
 			mt6358_va12_reg: ldo_va12 {
-				compatible = "regulator-fixed";
 				regulator-name = "va12";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -297,22 +289,14 @@
 			};
 
 			mt6358_vrf18_reg: ldo_vrf18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-enable-ramp-delay = <120>;
 			};
 
-			mt6358_vcn33_bt_reg: ldo_vcn33_bt {
-				regulator-name = "vcn33_bt";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3500000>;
-				regulator-enable-ramp-delay = <270>;
-			};
-
-			mt6358_vcn33_wifi_reg: ldo_vcn33_wifi {
-				regulator-name = "vcn33_wifi";
+			mt6358_vcn33_reg: ldo_vcn33 {
+				regulator-name = "vcn33";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3500000>;
 				regulator-enable-ramp-delay = <270>;
@@ -340,7 +324,6 @@
 			};
 
 			mt6358_vaud28_reg: ldo_vaud28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaud28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -355,11 +338,11 @@
 			};
 		};
 
-		mt6358rtc: mt6358rtc {
+		mt6358rtc: rtc {
 			compatible = "mediatek,mt6358-rtc";
 		};
 
-		mt6358keys: mt6358keys {
+		mt6358keys: keys {
 			compatible = "mediatek,mt6358-keys";
 			power {
 				linux,keycodes = <KEY_POWER>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6359.dtsi b/arch/arm64/boot/dts/mediatek/mt6359.dtsi
index df3e822232d3..467d8a4c2aa7 100644
--- a/arch/arm64/boot/dts/mediatek/mt6359.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6359.dtsi
@@ -8,11 +8,20 @@
 		compatible = "mediatek,mt6359";
 		interrupt-controller;
 		#interrupt-cells = <2>;
+		#sound-dai-cells = <1>;
 
-		mt6359codec: mt6359codec {
+		pmic_adc: adc {
+			compatible = "mediatek,mt6359-auxadc";
+			#io-channel-cells = <1>;
+		};
+
+		mt6359codec: audio-codec {
+			compatible = "mediatek,mt6359-codec";
 		};
 
 		regulators {
+			compatible = "mediatek,mt6359-regulator";
+
 			mt6359_vs1_buck_reg: buck_vs1 {
 				regulator-name = "vs1";
 				regulator-min-microvolt = <800000>;
@@ -291,7 +300,7 @@
 			};
 		};
 
-		mt6359rtc: mt6359rtc {
+		mt6359rtc: rtc {
 			compatible = "mediatek,mt6358-rtc";
 		};
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt6755-evb.dts b/arch/arm64/boot/dts/mediatek/mt6755-evb.dts
index e079b7932ba3..00b14f85c6a1 100644
--- a/arch/arm64/boot/dts/mediatek/mt6755-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt6755-evb.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "MediaTek MT6755 EVB";
+	chassis-type = "embedded";
 	compatible = "mediatek,mt6755-evb", "mediatek,mt6755";
 
 	aliases {
diff --git a/arch/arm64/boot/dts/mediatek/mt6755.dtsi b/arch/arm64/boot/dts/mediatek/mt6755.dtsi
index b55d3fac9bd4..8da5c0a56a02 100644
--- a/arch/arm64/boot/dts/mediatek/mt6755.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6755.dtsi
@@ -98,7 +98,7 @@
 			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	sysirq: intpol-controller@10200620 {
+	sysirq: interrupt-controller@10200620 {
 		compatible = "mediatek,mt6755-sysirq",
 			     "mediatek,mt6577-sysirq";
 		interrupt-controller;
diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
index 164f5cbb3821..56b1bf06e26b 100644
--- a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
@@ -10,6 +10,7 @@
 
 / {
 	model = "MediaTek MT6779 EVB";
+	chassis-type = "embedded";
 	compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
 
 	aliases {
diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
index 9bdf5145966c..70f3375916e8 100644
--- a/arch/arm64/boot/dts/mediatek/mt6779.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
@@ -88,14 +88,14 @@
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 		clock-output-names = "clk26m";
 	};
 
-	clk32k: oscillator@1 {
+	clk32k: oscillator-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
@@ -117,7 +117,7 @@
 		compatible = "simple-bus";
 		ranges;
 
-		gic: interrupt-controller@0c000000 {
+		gic: interrupt-controller@c000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <4>;
 			interrupt-parent = <&gic>;
@@ -138,7 +138,7 @@
 
 		};
 
-		sysirq: intpol-controller@0c53a650 {
+		sysirq: interrupt-controller@c53a650 {
 			compatible = "mediatek,mt6779-sysirq",
 				     "mediatek,mt6577-sysirq";
 			interrupt-controller;
@@ -160,7 +160,7 @@
 		};
 
 		pio: pinctrl@10005000 {
-			compatible = "mediatek,mt6779-pinctrl", "syscon";
+			compatible = "mediatek,mt6779-pinctrl";
 			reg = <0 0x10005000 0 0x1000>,
 			      <0 0x11c20000 0 0x1000>,
 			      <0 0x11d10000 0 0x1000>,
diff --git a/arch/arm64/boot/dts/mediatek/mt6795-evb.dts b/arch/arm64/boot/dts/mediatek/mt6795-evb.dts
index 1ed2f81edeff..e0d4d7a63139 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt6795-evb.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "MediaTek MT6795 Evaluation Board";
+	chassis-type = "embedded";
 	compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
 
 	aliases {
diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
new file mode 100644
index 000000000000..fccb948cfa45
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Collabora Ltd
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "mt6795.dtsi"
+#include "mt6331.dtsi"
+
+/ {
+	model = "Sony Xperia M5";
+	compatible = "sony,xperia-m5", "mediatek,mt6795";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	backlight_lcd0: backlight {
+		compatible = "led-backlight";
+		leds = <&disp_led_pwm>, <&pmic_bl_led>;
+
+		default-brightness-level = <300>;
+	};
+
+	led-controller-display {
+		compatible = "pwm-leds";
+
+		disp_led_pwm: led-0 {
+			label = "backlight-pwm";
+			pwms = <&pwm0 0 500000>;
+			max-brightness = <1024>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x1e800000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+
+		/* preloader and bootloader regions cannot be touched */
+		preloader-region@44800000 {
+			reg = <0 0x44800000 0 0x100000>;
+			no-map;
+		};
+
+		bootloader-region@46000000 {
+			reg = <0 0x46000000 0 0x400000>;
+			no-map;
+		};
+	};
+
+	vreg_disp_avdd: regulator-disp-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "disp_avdd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 138 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vreg_disp_avee: regulator-disp-avee {
+		compatible = "regulator-fixed";
+		regulator-name = "disp_avee";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 139 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vreg_disp_vddh: regulator-disp-vddh {
+		compatible = "regulator-fixed";
+		regulator-name = "disp_vddh";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	panel: panel@0 {
+		compatible = "sharp,ls060t1sx01";
+		reg = <0>;
+		avdd-supply = <&vreg_disp_avdd>;
+		avee-supply = <&vreg_disp_avee>;
+		vddi-supply = <&mt6331_vgp3_reg>;
+		vddh-supply = <&vreg_disp_vddh>;
+		reset-gpios = <&pio 106 GPIO_ACTIVE_LOW>;
+		backlight = <&backlight_lcd0>;
+
+		pinctrl-0 = <&disp_rst_pins>;
+		pinctrl-names = "default";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+
+	port {
+		dsi0_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&fhctl {
+	clocks = <&apmixedsys CLK_APMIXED_MAINPLL>, <&apmixedsys CLK_APMIXED_MPLL>,
+		 <&apmixedsys CLK_APMIXED_MSDCPLL>;
+	mediatek,hopping-ssc-percent = <8>, <5>, <8>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+
+	accelerometer@10 {
+		compatible = "bosch,bma255";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_pins>;
+	};
+
+	magnetometer@12 {
+		compatible = "bosch,bmm150";
+		reg = <0x12>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_pins>;
+		syna,startup-delay-ms = <160>;
+		syna,reset-delay-ms = <90>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+
+	pn547: nfc@28 {
+		compatible = "nxp,pn544-i2c";
+		reg = <0x28>;
+		interrupts-extended = <&pio 3 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&nfc_pins>;
+		enable-gpios = <&pio 149 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&pio 94 GPIO_ACTIVE_HIGH>;
+	};
+
+	proximity@48 {
+		compatible = "sensortek,stk3310";
+		reg = <0x48>;
+		interrupts-extended = <&pio 8 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&proximity_pins>;
+	};
+};
+
+&mmc0 {
+	/* eMMC controller */
+	mediatek,latch-ck = <4>; /* hs400 */
+	mediatek,hs200-cmd-int-delay = <1>;
+	mediatek,hs400-cmd-int-delay = <1>;
+	mediatek,hs400-ds-dly3 = <0x1a>;
+	non-removable;
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	vmmc-supply = <&mt6331_vemc33_reg>;
+	vqmmc-supply = <&mt6331_vio18_reg>;
+	status = "okay";
+};
+
+&mmc1 {
+	/* MicroSD card slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+	vmmc-supply = <&mt6331_vmc_reg>;
+	vqmmc-supply = <&mt6331_vmch_reg>;
+	status = "okay";
+};
+
+&mmc2 {
+	/* SDIO WiFi on MMC2 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
+	vmmc-supply = <&mt6331_vmc_reg>;
+	vqmmc-supply = <&mt6331_vmch_reg>;
+	status = "okay";
+};
+
+&mt6331_vgp3_reg {
+	regulator-min-microvolt = <1800000>;
+};
+
+&pio {
+	disp_rst_pins: lcm-pins {
+		pins-rst {
+			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
+		};
+	};
+
+	mmc0_pins_default: emmc-sdr-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO155__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO156__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO157__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO158__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO159__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO160__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	mmc0_pins_uhs: emmc-uhs-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO155__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO156__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO157__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO158__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO159__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO160__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO164__FUNC_MSDC0_DSL>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	mmc1_pins_default: microsd-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO171__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO172__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO173__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO174__FUNC_MSDC1_DAT3>,
+				 <PINMUX_GPIO170__FUNC_MSDC1_CMD>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO175__FUNC_MSDC1_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	mmc2_pins_default: sdio-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO100__FUNC_MSDC2_DAT0>,
+				 <PINMUX_GPIO101__FUNC_MSDC2_DAT1>,
+				 <PINMUX_GPIO102__FUNC_MSDC2_DAT2>,
+				 <PINMUX_GPIO103__FUNC_MSDC2_DAT3>,
+				 <PINMUX_GPIO105__FUNC_MSDC2_CMD>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO104__FUNC_MSDC2_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	nfc_pins: nfc-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO3__FUNC_GPIO3>;
+			bias-pull-down;
+			input-enable;
+		};
+
+		pins-fw-ven {
+			pinmux = <PINMUX_GPIO94__FUNC_GPIO94>,
+				 <PINMUX_GPIO149__FUNC_GPIO149>;
+		};
+	};
+
+	ts_pins: touchscreen-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+			bias-pull-up;
+			input-enable;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO102__FUNC_GPIO102>;
+			output-high;
+		};
+	};
+
+	proximity_pins: proximity-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	accel_pins: accelerometer-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO12__FUNC_GPIO12>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO45__FUNC_SDA0>,
+				 <PINMUX_GPIO46__FUNC_SCL0>;
+			input-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO125__FUNC_SDA1>,
+				 <PINMUX_GPIO126__FUNC_SCL1>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO43__FUNC_SDA2>,
+				 <PINMUX_GPIO44__FUNC_SCL2>;
+			bias-disable;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO136__FUNC_SDA3>,
+				 <PINMUX_GPIO137__FUNC_SCL3>;
+			bias-disable;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO100__FUNC_SDA4>,
+				 <PINMUX_GPIO101__FUNC_SCL4>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO113__FUNC_URXD0>;
+			bias-pull-up;
+			input-enable;
+		};
+		pins-tx {
+			pinmux = <PINMUX_GPIO114__FUNC_UTXD0>;
+			output-high;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO31__FUNC_URXD2>;
+			bias-pull-up;
+			input-enable;
+		};
+		pins-tx {
+			pinmux = <PINMUX_GPIO32__FUNC_UTXD2>;
+		};
+	};
+};
+
+&pmic {
+	/*
+	 * Smartphones, including the Xperia M5, are equipped with a companion
+	 * MT6332 PMIC: when this is present, the main MT6331 PMIC will fire
+	 * an interrupt on the companion, so we use the MT6332 IRQ GPIO.
+	 */
+	interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+
+	mt6332-led {
+		compatible = "mediatek,mt6332-led";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic_bl_led: led@0 {
+			reg = <0>;
+			label = "backlight-pmic";
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&uart2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
index d4842b4a4eb7..58833e5135c8 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
@@ -1,12 +1,19 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2015 MediaTek Inc.
- * Author: Mars.C <mars.cheng@mediatek.com>
+ * Copyright (C) 2023 Collabora Ltd.
+ * Authors: Mars.C <mars.cheng@mediatek.com>
+ *          AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mediatek,mt6795-clk.h>
+#include <dt-bindings/gce/mediatek,mt6795-gce.h>
+#include <dt-bindings/memory/mt6795-larb-port.h>
 #include <dt-bindings/pinctrl/mt6795-pinfunc.h>
+#include <dt-bindings/power/mt6795-power.h>
+#include <dt-bindings/reset/mediatek,mt6795-resets.h>
 
 / {
 	compatible = "mediatek,mt6795";
@@ -14,6 +21,23 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		ovl0 = &ovl0;
+		ovl1 = &ovl1;
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+		rdma2 = &rdma2;
+		wdma0 = &wdma0;
+		wdma1 = &wdma1;
+		color0 = &color0;
+		color1 = &color1;
+		split0 = &split0;
+		split1 = &split1;
+		dpi0 = &dpi0;
+		dsi0 = &dsi0;
+		dsi1 = &dsi1;
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -38,6 +62,12 @@
 			enable-method = "psci";
 			reg = <0x001>;
 			cci-control-port = <&cci_control2>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
 		};
 
@@ -47,6 +77,12 @@
 			enable-method = "psci";
 			reg = <0x002>;
 			cci-control-port = <&cci_control2>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
 		};
 
@@ -56,6 +92,12 @@
 			enable-method = "psci";
 			reg = <0x003>;
 			cci-control-port = <&cci_control2>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
 		};
 
@@ -65,6 +107,12 @@
 			enable-method = "psci";
 			reg = <0x100>;
 			cci-control-port = <&cci_control1>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&l2_1>;
 		};
 
@@ -74,6 +122,12 @@
 			enable-method = "psci";
 			reg = <0x101>;
 			cci-control-port = <&cci_control1>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&l2_1>;
 		};
 
@@ -83,6 +137,12 @@
 			enable-method = "psci";
 			reg = <0x102>;
 			cci-control-port = <&cci_control1>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&l2_1>;
 		};
 
@@ -92,6 +152,12 @@
 			enable-method = "psci";
 			reg = <0x103>;
 			cci-control-port = <&cci_control1>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&l2_1>;
 		};
 
@@ -136,11 +202,19 @@
 		l2_0: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-unified;
 		};
 
 		l2_1: l2-cache1 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-unified;
 		};
 	};
 
@@ -192,6 +266,104 @@
 		compatible = "simple-bus";
 		ranges;
 
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt6795-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: syscon@10001000 {
+			compatible = "mediatek,mt6795-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt6795-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+			#power-domain-cells = <1>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt6795-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domains of the SoC */
+				power-domain@MT6795_POWER_DOMAIN_VDEC {
+					reg = <MT6795_POWER_DOMAIN_VDEC>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+				};
+				power-domain@MT6795_POWER_DOMAIN_VENC {
+					reg = <MT6795_POWER_DOMAIN_VENC>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>,
+						 <&topckgen CLK_TOP_VENC_SEL>;
+					clock-names = "mm", "venc";
+					#power-domain-cells = <0>;
+				};
+				power-domain@MT6795_POWER_DOMAIN_ISP {
+					reg = <MT6795_POWER_DOMAIN_ISP>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT6795_POWER_DOMAIN_MM {
+					reg = <MT6795_POWER_DOMAIN_MM>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+
+				power-domain@MT6795_POWER_DOMAIN_MJC {
+					reg = <MT6795_POWER_DOMAIN_MJC>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>,
+						 <&topckgen CLK_TOP_MJC_SEL>;
+					clock-names = "mm", "mjc";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT6795_POWER_DOMAIN_AUDIO {
+					reg = <MT6795_POWER_DOMAIN_AUDIO>;
+					#power-domain-cells = <0>;
+				};
+
+				mfg_async: power-domain@MT6795_POWER_DOMAIN_MFG_ASYNC {
+					reg = <MT6795_POWER_DOMAIN_MFG_ASYNC>;
+					clocks = <&clk26m>;
+					clock-names = "mfg";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT6795_POWER_DOMAIN_MFG_2D {
+						reg = <MT6795_POWER_DOMAIN_MFG_2D>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT6795_POWER_DOMAIN_MFG {
+							reg = <MT6795_POWER_DOMAIN_MFG>;
+							#power-domain-cells = <0>;
+							mediatek,infracfg = <&infracfg>;
+						};
+					};
+				};
+			};
+		};
+
 		pio: pinctrl@10005000 {
 			compatible = "mediatek,mt6795-pinctrl";
 			reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>;
@@ -221,7 +393,18 @@
 			clocks = <&system_clk>, <&clk32k>;
 		};
 
-		sysirq: intpol-controller@10200620 {
+		pwrap: pwrap@1000d000 {
+			compatible = "mediatek,mt6795-pwrap";
+			reg = <0 0x1000d000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&infracfg MT6795_INFRA_RST0_PMIC_WRAP_RST>;
+			reset-names = "pwrap";
+			clocks = <&topckgen CLK_TOP_PMICSPI_SEL>, <&clk26m>;
+			clock-names = "spi", "wrap";
+		};
+
+		sysirq: interrupt-controller@10200620 {
 			compatible = "mediatek,mt6795-sysirq",
 				     "mediatek,mt6577-sysirq";
 			interrupt-controller;
@@ -230,6 +413,67 @@
 			reg = <0 0x10200620 0 0x20>;
 		};
 
+		systimer: timer@10200670 {
+			compatible = "mediatek,mt6795-systimer";
+			reg = <0 0x10200670 0 0x10>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&system_clk>;
+			clock-names = "clk13m";
+		};
+
+		iommu: iommu@10205000 {
+			compatible = "mediatek,mt6795-m4u";
+			reg = <0 0x10205000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_M4U>;
+			clock-names = "bclk";
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>;
+			mediatek,infracfg = <&infracfg>;
+			mediatek,larbs = <&larb0 &larb1 &larb2 &larb3>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			#iommu-cells = <1>;
+		};
+
+		apmixedsys: syscon@10209000 {
+			compatible = "mediatek,mt6795-apmixedsys", "syscon";
+			reg = <0 0x10209000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		fhctl: clock-controller@10209f00 {
+			compatible = "mediatek,mt6795-fhctl";
+			reg = <0 0x10209f00 0 0x100>;
+			status = "disabled";
+		};
+
+		gce: mailbox@10212000 {
+			compatible = "mediatek,mt6795-gce", "mediatek,mt8173-gce";
+			reg = <0 0x10212000 0 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_GCE>;
+			clock-names = "gce";
+			#mbox-cells = <2>;
+		};
+
+		mipi_tx0: dsi-phy@10215000 {
+			compatible = "mediatek,mt8173-mipi-tx";
+			reg = <0 0x10215000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		mipi_tx1: dsi-phy@10216000 {
+			compatible = "mediatek,mt8173-mipi-tx";
+			reg = <0 0x10216000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx1_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@10221000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -284,7 +528,10 @@
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11002000 0 0x400>;
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&clk26m>;
+			clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 0>, <&apdma 1>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -293,16 +540,48 @@
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11003000 0 0x400>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&clk26m>;
+			clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 2>, <&apdma 3>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
+		apdma: dma-controller@11000380 {
+			compatible = "mediatek,mt6795-uart-dma",
+				     "mediatek,mt6577-uart-dma";
+			reg = <0 0x11000380 0 0x60>,
+			      <0 0x11000400 0 0x60>,
+			      <0 0x11000480 0 0x60>,
+			      <0 0x11000500 0 0x60>,
+			      <0 0x11000580 0 0x60>,
+			      <0 0x11000600 0 0x60>,
+			      <0 0x11000680 0 0x60>,
+			      <0 0x11000700 0 0x60>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+			dma-requests = <8>;
+			clocks = <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "apdma";
+			mediatek,dma-33bits;
+			#dma-cells = <1>;
+		};
+
 		uart2: serial@11004000 {
 			compatible = "mediatek,mt6795-uart",
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11004000 0 0x400>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&clk26m>;
+			clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 4>, <&apdma 5>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -311,8 +590,416 @@
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11005000 0 0x400>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&clk26m>;
+			clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 6>, <&apdma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		pwm2: pwm@11006000 {
+			compatible = "mediatek,mt6795-pwm";
+			reg = <0 0x11006000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_PWM_SEL>,
+				 <&pericfg CLK_PERI_PWM>,
+				 <&pericfg CLK_PERI_PWM1>,
+				 <&pericfg CLK_PERI_PWM2>,
+				 <&pericfg CLK_PERI_PWM3>,
+				 <&pericfg CLK_PERI_PWM4>,
+				 <&pericfg CLK_PERI_PWM5>,
+				 <&pericfg CLK_PERI_PWM6>,
+				 <&pericfg CLK_PERI_PWM7>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
+				      "pwm4", "pwm5", "pwm6", "pwm7";
+			status = "disabled";
+		};
+
+		i2c0: i2c@11007000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11007000 0 0x70>, <0 0x11000100 0 0x80>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11008000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11008000 0 0x70>, <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11009000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11009000 0 0x70>, <0 0x11000200 0 0x80>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@11010000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11010000 0 0x70>, <0 0x11000280 0 0x80>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C3>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11011000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11011000 0 0x70>, <0 0x11000300 0 0x80>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C4>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11230000 0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_0>,
+				 <&topckgen CLK_TOP_MSDC50_0_H_SEL>,
+				 <&topckgen CLK_TOP_MSDC50_0_SEL>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11240000 0 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_1>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmc2: mmc@11250000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11250000 0 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_2>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmc3: mmc@11260000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11260000 0 0x1000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_3>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt6795-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			assigned-clocks = <&topckgen CLK_TOP_MM_SEL>;
+			assigned-clock-rates = <400000000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+		};
+
+		ovl0: ovl@1400c000 {
+			compatible = "mediatek,mt6795-disp-ovl", "mediatek,mt8173-disp-ovl";
+			reg = <0 0x1400c000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0>;
+			iommus = <&iommu M4U_PORT_DISP_OVL0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+		};
+
+		ovl1: ovl@1400d000 {
+			compatible = "mediatek,mt6795-disp-ovl", "mediatek,mt8173-disp-ovl";
+			reg = <0 0x1400d000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_OVL1>;
+			iommus = <&iommu M4U_PORT_DISP_OVL1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+		};
+
+		rdma0: rdma@1400e000 {
+			compatible = "mediatek,mt6795-disp-rdma", "mediatek,mt8173-disp-rdma";
+			reg = <0 0x1400e000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+		};
+
+		rdma1: rdma@1400f000 {
+			compatible = "mediatek,mt6795-disp-rdma", "mediatek,mt8173-disp-rdma";
+			reg = <0 0x1400f000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+		};
+
+		rdma2: rdma@14010000 {
+			compatible = "mediatek,mt6795-disp-rdma", "mediatek,mt8173-disp-rdma";
+			reg = <0 0x14010000 0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA2>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA2>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
+		};
+
+		wdma0: wdma@14011000 {
+			compatible = "mediatek,mt6795-disp-wdma", "mediatek,mt8173-disp-wdma";
+			reg = <0 0x14011000 0 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_WDMA0>;
+			iommus = <&iommu M4U_PORT_DISP_WDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+		};
+
+		wdma1: wdma@14012000 {
+			compatible = "mediatek,mt6795-disp-wdma", "mediatek,mt8173-disp-wdma";
+			reg = <0 0x14012000 0 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_WDMA1>;
+			iommus = <&iommu M4U_PORT_DISP_WDMA1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+		};
+
+		color0: color@14013000 {
+			compatible = "mediatek,mt6795-disp-color", "mediatek,mt8173-disp-color";
+			reg = <0 0x14013000 0 0x1000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>;
+		};
+
+		color1: color@14014000 {
+			compatible = "mediatek,mt6795-disp-color", "mediatek,mt8173-disp-color";
+			reg = <0 0x14014000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x4000 0x1000>;
+		};
+
+		aal@14015000 {
+			compatible = "mediatek,mt6795-disp-aal", "mediatek,mt8173-disp-aal";
+			reg = <0 0x14015000 0 0x1000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_AAL>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+		};
+
+		gamma@14016000 {
+			compatible = "mediatek,mt6795-disp-gamma", "mediatek,mt8173-disp-gamma";
+			reg = <0 0x14016000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
+		};
+
+		merge@14017000 {
+			compatible = "mediatek,mt6795-disp-merge", "mediatek,mt8173-disp-merge";
+			reg = <0 0x14017000 0 0x1000>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_MERGE>;
+		};
+
+		split0: split@14018000 {
+			compatible = "mediatek,mt6795-disp-split", "mediatek,mt8173-disp-split";
+			reg = <0 0x14018000 0 0x1000>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_SPLIT0>;
+		};
+
+		split1: split@14019000 {
+			compatible = "mediatek,mt6795-disp-split", "mediatek,mt8173-disp-split";
+			reg = <0 0x14019000 0 0x1000>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_SPLIT1>;
+		};
+
+		ufoe@1401a000 {
+			compatible = "mediatek,mt6795-disp-ufoe", "mediatek,mt8173-disp-ufoe";
+			reg = <0 0x1401a000 0 0x1000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_UFOE>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xa000 0x1000>;
+		};
+
+		dsi0: dsi@1401b000 {
+			compatible = "mediatek,mt6795-dsi", "mediatek,mt8173-dsi";
+			reg = <0 0x1401b000 0 0x1000>;
+			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DSI0_ENGINE>,
+				 <&mmsys CLK_MM_DSI0_DIGITAL>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
+		dsi1: dsi@1401c000 {
+			compatible = "mediatek,mt6795-dsi", "mediatek,mt8173-dsi";
+			reg = <0 0x1401c000 0 0x1000>;
+			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DSI1_ENGINE>,
+				 <&mmsys CLK_MM_DSI1_DIGITAL>,
+				 <&mipi_tx1>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx1>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
+		dpi0: dpi@1401d000 {
+			compatible = "mediatek,mt6795-dpi", "mediatek,mt8183-dpi";
+			reg = <0 0x1401d000 0 0x1000>;
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DPI_PIXEL>,
+				 <&mmsys CLK_MM_DPI_ENGINE>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL>;
+			clock-names = "pixel", "engine", "pll";
+			status = "disabled";
+		};
+
+		pwm0: pwm@1401e000 {
+			compatible = "mediatek,mt6795-disp-pwm", "mediatek,mt8173-disp-pwm";
+			reg = <0 0x1401e000 0 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&mmsys CLK_MM_DISP_PWM026M>, <&mmsys CLK_MM_DISP_PWM0MM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		pwm1: pwm@1401f000 {
+			compatible = "mediatek,mt6795-disp-pwm", "mediatek,mt8173-disp-pwm";
+			reg = <0 0x1401f000 0 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&mmsys CLK_MM_DISP_PWM126M>, <&mmsys CLK_MM_DISP_PWM1MM>;
+			clock-names = "main", "mm";
 			status = "disabled";
 		};
+
+		mutex: mutex@14020000 {
+			compatible = "mediatek,mt8173-disp-mutex";
+			reg = <0 0x14020000 0 0x1000>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_MUTEX_32K>;
+			mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
+					      <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0 0x1000>;
+		};
+
+		larb0: larb@14021000 {
+			compatible = "mediatek,mt6795-smi-larb";
+			reg = <0 0x14021000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>, <&mmsys CLK_MM_SMI_LARB0>;
+			clock-names = "apb", "smi";
+			mediatek,smi = <&smi_common>;
+			mediatek,larb-id = <0>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+		};
+
+		smi_common: smi@14022000 {
+			compatible = "mediatek,mt6795-smi-common";
+			reg = <0 0x14022000 0 0x1000>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&infracfg CLK_INFRA_SMI>, <&mmsys CLK_MM_SMI_COMMON>;
+			clock-names = "apb", "smi";
+		};
+
+		od@14023000 {
+			compatible = "mediatek,mt6795-disp-od", "mediatek,mt8173-disp-od";
+			reg = <0 0x14023000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_OD>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0x3000 0x1000>;
+		};
+
+		larb2: larb@15001000 {
+			compatible = "mediatek,mt6795-smi-larb";
+			reg = <0 0x15001000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>, <&infracfg CLK_INFRA_SMI>;
+			clock-names = "apb", "smi";
+			mediatek,smi = <&smi_common>;
+			mediatek,larb-id = <2>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_ISP>;
+		};
+
+		vdecsys: clock-controller@16000000 {
+			compatible = "mediatek,mt6795-vdecsys";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb1: larb@16010000 {
+			compatible = "mediatek,mt6795-smi-larb";
+			reg = <0 0x16010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			mediatek,larb-id = <1>;
+			clocks = <&vdecsys CLK_VDEC_CKEN>, <&vdecsys CLK_VDEC_LARB_CKEN>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT6795_POWER_DOMAIN_VDEC>;
+		};
+
+		vencsys: clock-controller@18000000 {
+			compatible = "mediatek,mt6795-vencsys";
+			reg = <0 0x18000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb3: larb@18001000 {
+			compatible = "mediatek,mt6795-smi-larb";
+			reg = <0 0x18001000 0 0x1000>;
+			clocks = <&vencsys CLK_VENC_VENC>, <&vencsys CLK_VENC_LARB>;
+			clock-names = "apb", "smi";
+			mediatek,smi = <&smi_common>;
+			mediatek,larb-id = <3>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_VENC>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt6797-evb.dts b/arch/arm64/boot/dts/mediatek/mt6797-evb.dts
index 2327e752d164..c927932afa0d 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt6797-evb.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "MediaTek MT6797 Evaluation Board";
+	chassis-type = "embedded";
 	compatible = "mediatek,mt6797-evb", "mediatek,mt6797";
 
 	aliases {
diff --git a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
index eff9e8dbd076..9534cf3a09d0 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
+++ b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
@@ -12,6 +12,7 @@
 
 / {
 	model = "Mediatek X20 Development Board";
+	chassis-type = "embedded";
 	compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797";
 
 	aliases {
diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index 15616231022a..8ac98a378fd6 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -95,7 +95,7 @@
 		};
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
@@ -117,7 +117,7 @@
 		#clock-cells = <1>;
 	};
 
-	infrasys: infracfg_ao@10001000 {
+	infrasys: syscon@10001000 {
 		compatible = "mediatek,mt6797-infracfg", "syscon";
 		reg = <0 0x10001000 0 0x1000>;
 		#clock-cells = <1>;
@@ -135,71 +135,71 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
-		uart0_pins_a: uart0 {
-			pins0 {
+		uart0_pins_a: uart0-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO234__FUNC_UTXD0>,
 					 <MT6797_GPIO235__FUNC_URXD0>;
 			};
 		};
 
-		uart1_pins_a: uart1 {
-			pins1 {
+		uart1_pins_a: uart1-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO232__FUNC_URXD1>,
 					 <MT6797_GPIO233__FUNC_UTXD1>;
 			};
 		};
 
-		i2c0_pins_a: i2c0 {
-			pins0 {
+		i2c0_pins_a: i2c0-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO37__FUNC_SCL0_0>,
 					 <MT6797_GPIO38__FUNC_SDA0_0>;
 			};
 		};
 
-		i2c1_pins_a: i2c1 {
-			pins1 {
+		i2c1_pins_a: i2c1-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO55__FUNC_SCL1_0>,
 					 <MT6797_GPIO56__FUNC_SDA1_0>;
 			};
 		};
 
-		i2c2_pins_a: i2c2 {
-			pins2 {
+		i2c2_pins_a: i2c2-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO96__FUNC_SCL2_0>,
 					 <MT6797_GPIO95__FUNC_SDA2_0>;
 			};
 		};
 
-		i2c3_pins_a: i2c3 {
-			pins3 {
+		i2c3_pins_a: i2c3-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO75__FUNC_SDA3_0>,
 					 <MT6797_GPIO74__FUNC_SCL3_0>;
 			};
 		};
 
-		i2c4_pins_a: i2c4 {
-			pins4 {
+		i2c4_pins_a: i2c4-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO238__FUNC_SDA4_0>,
 					 <MT6797_GPIO239__FUNC_SCL4_0>;
 			};
 		};
 
-		i2c5_pins_a: i2c5 {
-			pins5 {
+		i2c5_pins_a: i2c5-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO240__FUNC_SDA5_0>,
 					 <MT6797_GPIO241__FUNC_SCL5_0>;
 			};
 		};
 
-		i2c6_pins_a: i2c6 {
-			pins6 {
+		i2c6_pins_a: i2c6-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO152__FUNC_SDA6_0>,
 					 <MT6797_GPIO151__FUNC_SCL6_0>;
 			};
 		};
 
-		i2c7_pins_a: i2c7 {
-			pins7 {
+		i2c7_pins_a: i2c7-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO154__FUNC_SDA7_0>,
 					 <MT6797_GPIO153__FUNC_SCL7_0>;
 			};
@@ -228,7 +228,7 @@
 		#clock-cells = <1>;
 	};
 
-	sysirq: intpol-controller@10200620 {
+	sysirq: interrupt-controller@10200620 {
 		compatible = "mediatek,mt6797-sysirq",
 			     "mediatek,mt6577-sysirq";
 		interrupt-controller;
@@ -285,7 +285,6 @@
 	i2c0: i2c@11007000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <0>;
 		reg = <0 0x11007000 0 0x1000>,
 		      <0 0x11000100 0 0x80>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
@@ -301,7 +300,6 @@
 	i2c1: i2c@11008000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <1>;
 		reg = <0 0x11008000 0 0x1000>,
 		      <0 0x11000180 0 0x80>;
 		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
@@ -317,7 +315,6 @@
 	i2c8: i2c@11009000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <8>;
 		reg = <0 0x11009000 0 0x1000>,
 		      <0 0x11000200 0 0x80>;
 		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
@@ -334,7 +331,6 @@
 	i2c9: i2c@1100d000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <9>;
 		reg = <0 0x1100d000 0 0x1000>,
 		      <0 0x11000280 0 0x80>;
 		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
@@ -351,7 +347,6 @@
 	i2c6: i2c@1100e000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <6>;
 		reg = <0 0x1100e000 0 0x1000>,
 		      <0 0x11000500 0 0x80>;
 		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
@@ -367,7 +362,6 @@
 	i2c7: i2c@11010000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <7>;
 		reg = <0 0x11010000 0 0x1000>,
 		      <0 0x11000580 0 0x80>;
 		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
@@ -383,7 +377,6 @@
 	i2c4: i2c@11011000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <4>;
 		reg = <0 0x11011000 0 0x1000>,
 		      <0 0x11000300 0 0x80>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
@@ -399,7 +392,6 @@
 	i2c2: i2c@11013000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <2>;
 		reg = <0 0x11013000 0 0x1000>,
 		      <0 0x11000400 0 0x80>;
 		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
@@ -416,7 +408,6 @@
 	i2c3: i2c@11014000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <3>;
 		reg = <0 0x11014000 0 0x1000>,
 		      <0 0x11000480 0 0x80>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
@@ -433,7 +424,6 @@
 	i2c5: i2c@1101c000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <5>;
 		reg = <0 0x1101c000 0 0x1000>,
 		      <0 0x11000380 0 0x80>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
@@ -452,19 +442,19 @@
 		#clock-cells = <1>;
 	};
 
-	imgsys: imgsys_config@15000000  {
+	imgsys: syscon@15000000  {
 		compatible = "mediatek,mt6797-imgsys", "syscon";
 		reg = <0 0x15000000 0 0x1000>;
 		#clock-cells = <1>;
 	};
 
-	vdecsys: vdec_gcon@16000000 {
+	vdecsys: syscon@16000000 {
 		compatible = "mediatek,mt6797-vdecsys", "syscon";
 		reg = <0 0x16000000 0 0x10000>;
 		#clock-cells = <1>;
 	};
 
-	vencsys: venc_gcon@17000000 {
+	vencsys: syscon@17000000 {
 		compatible = "mediatek,mt6797-vencsys", "syscon";
 		reg = <0 0x17000000 0 0x1000>;
 		#clock-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6893-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt6893-pinfunc.h
new file mode 100644
index 000000000000..982bc95c471c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6893-pinfunc.h
@@ -0,0 +1,1356 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Copyright (c) 2025 Collabora Ltd
+ */
+
+#ifndef __MT6893_PINFUNC_H
+#define __MT6893_PINFUNC_H
+
+#include "mt65xx.h"
+
+#define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define PINMUX_GPIO0__FUNC_SPI6_CLK (MTK_PIN_NO(0) | 1)
+#define PINMUX_GPIO0__FUNC_I2S5_MCK (MTK_PIN_NO(0) | 2)
+#define PINMUX_GPIO0__FUNC_PWM_0 (MTK_PIN_NO(0) | 3)
+#define PINMUX_GPIO0__FUNC_MD_INT0 (MTK_PIN_NO(0) | 4)
+#define PINMUX_GPIO0__FUNC_TP_GPIO0_AO (MTK_PIN_NO(0) | 5)
+
+#define PINMUX_GPIO1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define PINMUX_GPIO1__FUNC_SPI6_CSB (MTK_PIN_NO(1) | 1)
+#define PINMUX_GPIO1__FUNC_I2S5_BCK (MTK_PIN_NO(1) | 2)
+#define PINMUX_GPIO1__FUNC_PWM_1 (MTK_PIN_NO(1) | 3)
+#define PINMUX_GPIO1__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(1) | 4)
+#define PINMUX_GPIO1__FUNC_TP_GPIO1_AO (MTK_PIN_NO(1) | 5)
+
+#define PINMUX_GPIO2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define PINMUX_GPIO2__FUNC_SPI6_MI (MTK_PIN_NO(2) | 1)
+#define PINMUX_GPIO2__FUNC_I2S5_LRCK (MTK_PIN_NO(2) | 2)
+#define PINMUX_GPIO2__FUNC_PWM_2 (MTK_PIN_NO(2) | 3)
+#define PINMUX_GPIO2__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(2) | 4)
+#define PINMUX_GPIO2__FUNC_TP_GPIO2_AO (MTK_PIN_NO(2) | 5)
+
+#define PINMUX_GPIO3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define PINMUX_GPIO3__FUNC_SPI6_MO (MTK_PIN_NO(3) | 1)
+#define PINMUX_GPIO3__FUNC_I2S5_DO (MTK_PIN_NO(3) | 2)
+#define PINMUX_GPIO3__FUNC_PWM_3 (MTK_PIN_NO(3) | 3)
+#define PINMUX_GPIO3__FUNC_CLKM0 (MTK_PIN_NO(3) | 4)
+#define PINMUX_GPIO3__FUNC_TP_GPIO3_AO (MTK_PIN_NO(3) | 5)
+
+#define PINMUX_GPIO4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define PINMUX_GPIO4__FUNC_SPI7_A_CLK (MTK_PIN_NO(4) | 1)
+#define PINMUX_GPIO4__FUNC_I2S2_MCK (MTK_PIN_NO(4) | 2)
+#define PINMUX_GPIO4__FUNC_DMIC1_CLK (MTK_PIN_NO(4) | 3)
+#define PINMUX_GPIO4__FUNC_PCM1_DI (MTK_PIN_NO(4) | 4)
+#define PINMUX_GPIO4__FUNC_TP_GPIO4_AO (MTK_PIN_NO(4) | 5)
+
+#define PINMUX_GPIO5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define PINMUX_GPIO5__FUNC_SPI7_A_CSB (MTK_PIN_NO(5) | 1)
+#define PINMUX_GPIO5__FUNC_I2S2_BCK (MTK_PIN_NO(5) | 2)
+#define PINMUX_GPIO5__FUNC_DMIC1_DAT (MTK_PIN_NO(5) | 3)
+#define PINMUX_GPIO5__FUNC_PCM1_CLK (MTK_PIN_NO(5) | 4)
+#define PINMUX_GPIO5__FUNC_TP_GPIO5_AO (MTK_PIN_NO(5) | 5)
+
+#define PINMUX_GPIO6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define PINMUX_GPIO6__FUNC_SPI7_A_MI (MTK_PIN_NO(6) | 1)
+#define PINMUX_GPIO6__FUNC_I2S2_LRCK (MTK_PIN_NO(6) | 2)
+#define PINMUX_GPIO6__FUNC_DMIC_CLK (MTK_PIN_NO(6) | 3)
+#define PINMUX_GPIO6__FUNC_PCM1_SYNC (MTK_PIN_NO(6) | 4)
+#define PINMUX_GPIO6__FUNC_TP_GPIO6_AO (MTK_PIN_NO(6) | 5)
+#define PINMUX_GPIO6__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(6) | 6)
+
+#define PINMUX_GPIO7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define PINMUX_GPIO7__FUNC_SPI7_A_MO (MTK_PIN_NO(7) | 1)
+#define PINMUX_GPIO7__FUNC_I2S2_DI (MTK_PIN_NO(7) | 2)
+#define PINMUX_GPIO7__FUNC_DMIC_DAT (MTK_PIN_NO(7) | 3)
+#define PINMUX_GPIO7__FUNC_PCM1_DO0 (MTK_PIN_NO(7) | 4)
+#define PINMUX_GPIO7__FUNC_TP_GPIO7_AO (MTK_PIN_NO(7) | 5)
+#define PINMUX_GPIO7__FUNC_WIFI_TXD (MTK_PIN_NO(7) | 6)
+
+#define PINMUX_GPIO8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define PINMUX_GPIO8__FUNC_SRCLKENAI1 (MTK_PIN_NO(8) | 1)
+#define PINMUX_GPIO8__FUNC_I2S2_DI2 (MTK_PIN_NO(8) | 2)
+#define PINMUX_GPIO8__FUNC_KPCOL2 (MTK_PIN_NO(8) | 3)
+#define PINMUX_GPIO8__FUNC_PCM1_DO1 (MTK_PIN_NO(8) | 4)
+#define PINMUX_GPIO8__FUNC_CLKM1 (MTK_PIN_NO(8) | 5)
+#define PINMUX_GPIO8__FUNC_CONN_BT_TXD (MTK_PIN_NO(8) | 6)
+
+#define PINMUX_GPIO9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define PINMUX_GPIO9__FUNC_SRCLKENAI0 (MTK_PIN_NO(9) | 1)
+#define PINMUX_GPIO9__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(9) | 2)
+#define PINMUX_GPIO9__FUNC_KPROW2 (MTK_PIN_NO(9) | 3)
+#define PINMUX_GPIO9__FUNC_PCM1_DO2 (MTK_PIN_NO(9) | 4)
+#define PINMUX_GPIO9__FUNC_CLKM3 (MTK_PIN_NO(9) | 5)
+#define PINMUX_GPIO9__FUNC_CMMCLK4 (MTK_PIN_NO(9) | 6)
+
+#define PINMUX_GPIO10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define PINMUX_GPIO10__FUNC_MSDC1_CLK_A (MTK_PIN_NO(10) | 1)
+#define PINMUX_GPIO10__FUNC_SPI4_B_CLK (MTK_PIN_NO(10) | 2)
+#define PINMUX_GPIO10__FUNC_I2S8_MCK (MTK_PIN_NO(10) | 3)
+#define PINMUX_GPIO10__FUNC_DSI1_TE (MTK_PIN_NO(10) | 4)
+#define PINMUX_GPIO10__FUNC_MD_INT0 (MTK_PIN_NO(10) | 5)
+#define PINMUX_GPIO10__FUNC_TP_GPIO0_AO (MTK_PIN_NO(10) | 6)
+
+#define PINMUX_GPIO11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define PINMUX_GPIO11__FUNC_MSDC1_CMD_A (MTK_PIN_NO(11) | 1)
+#define PINMUX_GPIO11__FUNC_SPI4_B_CSB (MTK_PIN_NO(11) | 2)
+#define PINMUX_GPIO11__FUNC_I2S8_BCK (MTK_PIN_NO(11) | 3)
+#define PINMUX_GPIO11__FUNC_LCM1_RST (MTK_PIN_NO(11) | 4)
+#define PINMUX_GPIO11__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(11) | 5)
+#define PINMUX_GPIO11__FUNC_TP_GPIO1_AO (MTK_PIN_NO(11) | 6)
+
+#define PINMUX_GPIO12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define PINMUX_GPIO12__FUNC_MSDC1_DAT3_A (MTK_PIN_NO(12) | 1)
+#define PINMUX_GPIO12__FUNC_SPI4_B_MI (MTK_PIN_NO(12) | 2)
+#define PINMUX_GPIO12__FUNC_I2S8_LRCK (MTK_PIN_NO(12) | 3)
+#define PINMUX_GPIO12__FUNC_DMIC1_CLK (MTK_PIN_NO(12) | 4)
+#define PINMUX_GPIO12__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(12) | 5)
+#define PINMUX_GPIO12__FUNC_TP_GPIO2_AO (MTK_PIN_NO(12) | 6)
+
+#define PINMUX_GPIO13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define PINMUX_GPIO13__FUNC_MSDC1_DAT0_A (MTK_PIN_NO(13) | 1)
+#define PINMUX_GPIO13__FUNC_SPI4_B_MO (MTK_PIN_NO(13) | 2)
+#define PINMUX_GPIO13__FUNC_I2S8_DI (MTK_PIN_NO(13) | 3)
+#define PINMUX_GPIO13__FUNC_DMIC1_DAT (MTK_PIN_NO(13) | 4)
+#define PINMUX_GPIO13__FUNC_ANT_SEL10 (MTK_PIN_NO(13) | 5)
+#define PINMUX_GPIO13__FUNC_TP_GPIO3_AO (MTK_PIN_NO(13) | 6)
+
+#define PINMUX_GPIO14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define PINMUX_GPIO14__FUNC_MSDC1_DAT2_A (MTK_PIN_NO(14) | 1)
+#define PINMUX_GPIO14__FUNC_SPI5_C_CLK (MTK_PIN_NO(14) | 2)
+#define PINMUX_GPIO14__FUNC_I2S9_MCK (MTK_PIN_NO(14) | 3)
+#define PINMUX_GPIO14__FUNC_IDDIG (MTK_PIN_NO(14) | 4)
+#define PINMUX_GPIO14__FUNC_ANT_SEL11 (MTK_PIN_NO(14) | 5)
+#define PINMUX_GPIO14__FUNC_TP_GPIO4_AO (MTK_PIN_NO(14) | 6)
+
+#define PINMUX_GPIO15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define PINMUX_GPIO15__FUNC_MSDC1_DAT1_A (MTK_PIN_NO(15) | 1)
+#define PINMUX_GPIO15__FUNC_SPI5_C_CSB (MTK_PIN_NO(15) | 2)
+#define PINMUX_GPIO15__FUNC_I2S9_BCK (MTK_PIN_NO(15) | 3)
+#define PINMUX_GPIO15__FUNC_USB_DRVVBUS (MTK_PIN_NO(15) | 4)
+#define PINMUX_GPIO15__FUNC_ANT_SEL12 (MTK_PIN_NO(15) | 5)
+#define PINMUX_GPIO15__FUNC_TP_GPIO5_AO (MTK_PIN_NO(15) | 6)
+
+#define PINMUX_GPIO16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define PINMUX_GPIO16__FUNC_SRCLKENAI1 (MTK_PIN_NO(16) | 1)
+#define PINMUX_GPIO16__FUNC_SPI5_C_MI (MTK_PIN_NO(16) | 2)
+#define PINMUX_GPIO16__FUNC_I2S9_LRCK (MTK_PIN_NO(16) | 3)
+#define PINMUX_GPIO16__FUNC_KPCOL2 (MTK_PIN_NO(16) | 4)
+#define PINMUX_GPIO16__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(16) | 5)
+#define PINMUX_GPIO16__FUNC_TP_GPIO6_AO (MTK_PIN_NO(16) | 6)
+#define PINMUX_GPIO16__FUNC_DBG_MON_A30 (MTK_PIN_NO(16) | 7)
+
+#define PINMUX_GPIO17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define PINMUX_GPIO17__FUNC_SRCLKENAI0 (MTK_PIN_NO(17) | 1)
+#define PINMUX_GPIO17__FUNC_SPI5_C_MO (MTK_PIN_NO(17) | 2)
+#define PINMUX_GPIO17__FUNC_I2S9_DO (MTK_PIN_NO(17) | 3)
+#define PINMUX_GPIO17__FUNC_KPROW2 (MTK_PIN_NO(17) | 4)
+#define PINMUX_GPIO17__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(17) | 5)
+#define PINMUX_GPIO17__FUNC_TP_GPIO7_AO (MTK_PIN_NO(17) | 6)
+#define PINMUX_GPIO17__FUNC_DBG_MON_A31 (MTK_PIN_NO(17) | 7)
+
+#define PINMUX_GPIO18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define PINMUX_GPIO18__FUNC_DP_TX_HPD (MTK_PIN_NO(18) | 1)
+#define PINMUX_GPIO18__FUNC_SPI4_C_MI (MTK_PIN_NO(18) | 2)
+#define PINMUX_GPIO18__FUNC_SPI1_B_MI (MTK_PIN_NO(18) | 3)
+#define PINMUX_GPIO18__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(18) | 4)
+#define PINMUX_GPIO18__FUNC_ANT_SEL10 (MTK_PIN_NO(18) | 5)
+#define PINMUX_GPIO18__FUNC_MD_INT0 (MTK_PIN_NO(18) | 6)
+
+#define PINMUX_GPIO19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define PINMUX_GPIO19__FUNC_SRCLKENAI1 (MTK_PIN_NO(19) | 1)
+#define PINMUX_GPIO19__FUNC_SPI4_C_MO (MTK_PIN_NO(19) | 2)
+#define PINMUX_GPIO19__FUNC_SPI1_B_MO (MTK_PIN_NO(19) | 3)
+#define PINMUX_GPIO19__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(19) | 4)
+#define PINMUX_GPIO19__FUNC_ANT_SEL11 (MTK_PIN_NO(19) | 5)
+#define PINMUX_GPIO19__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(19) | 6)
+
+#define PINMUX_GPIO20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define PINMUX_GPIO20__FUNC_SRCLKENAI0 (MTK_PIN_NO(20) | 1)
+#define PINMUX_GPIO20__FUNC_SPI4_C_CLK (MTK_PIN_NO(20) | 2)
+#define PINMUX_GPIO20__FUNC_SPI1_B_CLK (MTK_PIN_NO(20) | 3)
+#define PINMUX_GPIO20__FUNC_PWM_3 (MTK_PIN_NO(20) | 4)
+#define PINMUX_GPIO20__FUNC_ANT_SEL12 (MTK_PIN_NO(20) | 5)
+#define PINMUX_GPIO20__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(20) | 6)
+
+#define PINMUX_GPIO21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define PINMUX_GPIO21__FUNC_DP_TX_HPD (MTK_PIN_NO(21) | 1)
+#define PINMUX_GPIO21__FUNC_SPI4_C_CSB (MTK_PIN_NO(21) | 2)
+#define PINMUX_GPIO21__FUNC_SPI1_B_CSB (MTK_PIN_NO(21) | 3)
+#define PINMUX_GPIO21__FUNC_I2S7_MCK (MTK_PIN_NO(21) | 4)
+#define PINMUX_GPIO21__FUNC_I2S9_MCK (MTK_PIN_NO(21) | 5)
+#define PINMUX_GPIO21__FUNC_IDDIG (MTK_PIN_NO(21) | 6)
+
+#define PINMUX_GPIO22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define PINMUX_GPIO22__FUNC_LCM1_RST (MTK_PIN_NO(22) | 1)
+#define PINMUX_GPIO22__FUNC_SPI0_C_CLK (MTK_PIN_NO(22) | 2)
+#define PINMUX_GPIO22__FUNC_SPI7_B_CLK (MTK_PIN_NO(22) | 3)
+#define PINMUX_GPIO22__FUNC_I2S7_BCK (MTK_PIN_NO(22) | 4)
+#define PINMUX_GPIO22__FUNC_I2S9_BCK (MTK_PIN_NO(22) | 5)
+#define PINMUX_GPIO22__FUNC_SCL13 (MTK_PIN_NO(22) | 6)
+
+#define PINMUX_GPIO23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define PINMUX_GPIO23__FUNC_DSI1_TE (MTK_PIN_NO(23) | 1)
+#define PINMUX_GPIO23__FUNC_SPI0_C_CSB (MTK_PIN_NO(23) | 2)
+#define PINMUX_GPIO23__FUNC_SPI7_B_CSB (MTK_PIN_NO(23) | 3)
+#define PINMUX_GPIO23__FUNC_I2S7_LRCK (MTK_PIN_NO(23) | 4)
+#define PINMUX_GPIO23__FUNC_I2S9_LRCK (MTK_PIN_NO(23) | 5)
+#define PINMUX_GPIO23__FUNC_SDA13 (MTK_PIN_NO(23) | 6)
+
+#define PINMUX_GPIO24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define PINMUX_GPIO24__FUNC_SRCLKENAI1 (MTK_PIN_NO(24) | 1)
+#define PINMUX_GPIO24__FUNC_SPI0_C_MI (MTK_PIN_NO(24) | 2)
+#define PINMUX_GPIO24__FUNC_SPI7_B_MI (MTK_PIN_NO(24) | 3)
+#define PINMUX_GPIO24__FUNC_I2S6_DI (MTK_PIN_NO(24) | 4)
+#define PINMUX_GPIO24__FUNC_I2S8_DI (MTK_PIN_NO(24) | 5)
+#define PINMUX_GPIO24__FUNC_SCL_6306 (MTK_PIN_NO(24) | 6)
+
+#define PINMUX_GPIO25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define PINMUX_GPIO25__FUNC_SRCLKENAI0 (MTK_PIN_NO(25) | 1)
+#define PINMUX_GPIO25__FUNC_SPI0_C_MO (MTK_PIN_NO(25) | 2)
+#define PINMUX_GPIO25__FUNC_SPI7_B_MO (MTK_PIN_NO(25) | 3)
+#define PINMUX_GPIO25__FUNC_I2S7_DO (MTK_PIN_NO(25) | 4)
+#define PINMUX_GPIO25__FUNC_I2S9_DO (MTK_PIN_NO(25) | 5)
+#define PINMUX_GPIO25__FUNC_SDA_6306 (MTK_PIN_NO(25) | 6)
+
+#define PINMUX_GPIO26__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define PINMUX_GPIO26__FUNC_PWM_2 (MTK_PIN_NO(26) | 1)
+#define PINMUX_GPIO26__FUNC_CLKM0 (MTK_PIN_NO(26) | 2)
+#define PINMUX_GPIO26__FUNC_USB_DRVVBUS (MTK_PIN_NO(26) | 3)
+
+#define PINMUX_GPIO27__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define PINMUX_GPIO27__FUNC_PWM_3 (MTK_PIN_NO(27) | 1)
+#define PINMUX_GPIO27__FUNC_CLKM1 (MTK_PIN_NO(27) | 2)
+
+#define PINMUX_GPIO28__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define PINMUX_GPIO28__FUNC_PWM_0 (MTK_PIN_NO(28) | 1)
+#define PINMUX_GPIO28__FUNC_CLKM2 (MTK_PIN_NO(28) | 2)
+
+#define PINMUX_GPIO29__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define PINMUX_GPIO29__FUNC_PWM_1 (MTK_PIN_NO(29) | 1)
+#define PINMUX_GPIO29__FUNC_CLKM3 (MTK_PIN_NO(29) | 2)
+#define PINMUX_GPIO29__FUNC_DSI1_TE (MTK_PIN_NO(29) | 3)
+
+#define PINMUX_GPIO30__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define PINMUX_GPIO30__FUNC_PWM_2 (MTK_PIN_NO(30) | 1)
+#define PINMUX_GPIO30__FUNC_CLKM0 (MTK_PIN_NO(30) | 2)
+#define PINMUX_GPIO30__FUNC_LCM1_RST (MTK_PIN_NO(30) | 3)
+
+#define PINMUX_GPIO31__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define PINMUX_GPIO31__FUNC_I2S3_MCK (MTK_PIN_NO(31) | 1)
+#define PINMUX_GPIO31__FUNC_I2S1_MCK (MTK_PIN_NO(31) | 2)
+#define PINMUX_GPIO31__FUNC_I2S5_MCK (MTK_PIN_NO(31) | 3)
+#define PINMUX_GPIO31__FUNC_SRCLKENAI0 (MTK_PIN_NO(31) | 4)
+#define PINMUX_GPIO31__FUNC_I2S0_MCK (MTK_PIN_NO(31) | 5)
+
+#define PINMUX_GPIO32__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define PINMUX_GPIO32__FUNC_I2S3_BCK (MTK_PIN_NO(32) | 1)
+#define PINMUX_GPIO32__FUNC_I2S1_BCK (MTK_PIN_NO(32) | 2)
+#define PINMUX_GPIO32__FUNC_I2S5_BCK (MTK_PIN_NO(32) | 3)
+#define PINMUX_GPIO32__FUNC_PCM0_CLK (MTK_PIN_NO(32) | 4)
+#define PINMUX_GPIO32__FUNC_I2S0_BCK (MTK_PIN_NO(32) | 5)
+
+#define PINMUX_GPIO33__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define PINMUX_GPIO33__FUNC_I2S3_LRCK (MTK_PIN_NO(33) | 1)
+#define PINMUX_GPIO33__FUNC_I2S1_LRCK (MTK_PIN_NO(33) | 2)
+#define PINMUX_GPIO33__FUNC_I2S5_LRCK (MTK_PIN_NO(33) | 3)
+#define PINMUX_GPIO33__FUNC_PCM0_SYNC (MTK_PIN_NO(33) | 4)
+#define PINMUX_GPIO33__FUNC_I2S0_LRCK (MTK_PIN_NO(33) | 5)
+
+#define PINMUX_GPIO34__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define PINMUX_GPIO34__FUNC_I2S0_DI (MTK_PIN_NO(34) | 1)
+#define PINMUX_GPIO34__FUNC_I2S2_DI (MTK_PIN_NO(34) | 2)
+#define PINMUX_GPIO34__FUNC_I2S2_DI2 (MTK_PIN_NO(34) | 3)
+#define PINMUX_GPIO34__FUNC_PCM0_DI (MTK_PIN_NO(34) | 4)
+#define PINMUX_GPIO34__FUNC_I2S0_DI_A (MTK_PIN_NO(34) | 5)
+
+#define PINMUX_GPIO35__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define PINMUX_GPIO35__FUNC_I2S3_DO (MTK_PIN_NO(35) | 1)
+#define PINMUX_GPIO35__FUNC_I2S1_DO (MTK_PIN_NO(35) | 2)
+#define PINMUX_GPIO35__FUNC_I2S5_DO (MTK_PIN_NO(35) | 3)
+#define PINMUX_GPIO35__FUNC_PCM0_DO (MTK_PIN_NO(35) | 4)
+
+#define PINMUX_GPIO36__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define PINMUX_GPIO36__FUNC_SPI5_A_CLK (MTK_PIN_NO(36) | 1)
+#define PINMUX_GPIO36__FUNC_DMIC1_CLK (MTK_PIN_NO(36) | 2)
+#define PINMUX_GPIO36__FUNC_IDDIG (MTK_PIN_NO(36) | 3)
+#define PINMUX_GPIO36__FUNC_MD_URXD0 (MTK_PIN_NO(36) | 4)
+#define PINMUX_GPIO36__FUNC_UCTS0 (MTK_PIN_NO(36) | 5)
+#define PINMUX_GPIO36__FUNC_URXD1 (MTK_PIN_NO(36) | 6)
+#define PINMUX_GPIO36__FUNC_DBG_MON_A0 (MTK_PIN_NO(36) | 7)
+
+#define PINMUX_GPIO37__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define PINMUX_GPIO37__FUNC_SPI5_A_CSB (MTK_PIN_NO(37) | 1)
+#define PINMUX_GPIO37__FUNC_DMIC1_DAT (MTK_PIN_NO(37) | 2)
+#define PINMUX_GPIO37__FUNC_USB_DRVVBUS (MTK_PIN_NO(37) | 3)
+#define PINMUX_GPIO37__FUNC_MD_UTXD0 (MTK_PIN_NO(37) | 4)
+#define PINMUX_GPIO37__FUNC_URTS0 (MTK_PIN_NO(37) | 5)
+#define PINMUX_GPIO37__FUNC_UTXD1 (MTK_PIN_NO(37) | 6)
+#define PINMUX_GPIO37__FUNC_DBG_MON_A1 (MTK_PIN_NO(37) | 7)
+
+#define PINMUX_GPIO38__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define PINMUX_GPIO38__FUNC_SPI5_A_MI (MTK_PIN_NO(38) | 1)
+#define PINMUX_GPIO38__FUNC_DMIC_CLK (MTK_PIN_NO(38) | 2)
+#define PINMUX_GPIO38__FUNC_DSI1_TE (MTK_PIN_NO(38) | 3)
+#define PINMUX_GPIO38__FUNC_MD_URXD1 (MTK_PIN_NO(38) | 4)
+#define PINMUX_GPIO38__FUNC_URXD0 (MTK_PIN_NO(38) | 5)
+#define PINMUX_GPIO38__FUNC_UCTS1 (MTK_PIN_NO(38) | 6)
+#define PINMUX_GPIO38__FUNC_DBG_MON_A2 (MTK_PIN_NO(38) | 7)
+
+#define PINMUX_GPIO39__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define PINMUX_GPIO39__FUNC_SPI5_A_MO (MTK_PIN_NO(39) | 1)
+#define PINMUX_GPIO39__FUNC_DMIC_DAT (MTK_PIN_NO(39) | 2)
+#define PINMUX_GPIO39__FUNC_LCM1_RST (MTK_PIN_NO(39) | 3)
+#define PINMUX_GPIO39__FUNC_MD_UTXD1 (MTK_PIN_NO(39) | 4)
+#define PINMUX_GPIO39__FUNC_UTXD0 (MTK_PIN_NO(39) | 5)
+#define PINMUX_GPIO39__FUNC_URTS1 (MTK_PIN_NO(39) | 6)
+#define PINMUX_GPIO39__FUNC_DBG_MON_A3 (MTK_PIN_NO(39) | 7)
+
+#define PINMUX_GPIO40__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define PINMUX_GPIO40__FUNC_DISP_PWM (MTK_PIN_NO(40) | 1)
+#define PINMUX_GPIO40__FUNC_DBG_MON_A6 (MTK_PIN_NO(40) | 7)
+
+#define PINMUX_GPIO41__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define PINMUX_GPIO41__FUNC_DSI_TE (MTK_PIN_NO(41) | 1)
+
+#define PINMUX_GPIO42__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define PINMUX_GPIO42__FUNC_LCM_RST (MTK_PIN_NO(42) | 1)
+
+#define PINMUX_GPIO43__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define PINMUX_GPIO43__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(43) | 1)
+#define PINMUX_GPIO43__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(43) | 2)
+#define PINMUX_GPIO43__FUNC_SCL_6306 (MTK_PIN_NO(43) | 3)
+#define PINMUX_GPIO43__FUNC_ADSP_URXD0 (MTK_PIN_NO(43) | 4)
+#define PINMUX_GPIO43__FUNC_PTA_RXD (MTK_PIN_NO(43) | 5)
+#define PINMUX_GPIO43__FUNC_SSPM_URXD_AO (MTK_PIN_NO(43) | 6)
+#define PINMUX_GPIO43__FUNC_DBG_MON_A4 (MTK_PIN_NO(43) | 7)
+
+#define PINMUX_GPIO44__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define PINMUX_GPIO44__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(44) | 1)
+#define PINMUX_GPIO44__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(44) | 2)
+#define PINMUX_GPIO44__FUNC_SDA_6306 (MTK_PIN_NO(44) | 3)
+#define PINMUX_GPIO44__FUNC_ADSP_UTXD0 (MTK_PIN_NO(44) | 4)
+#define PINMUX_GPIO44__FUNC_PTA_TXD (MTK_PIN_NO(44) | 5)
+#define PINMUX_GPIO44__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(44) | 6)
+#define PINMUX_GPIO44__FUNC_DBG_MON_A5 (MTK_PIN_NO(44) | 7)
+
+#define PINMUX_GPIO45__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define PINMUX_GPIO45__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(45) | 1)
+#define PINMUX_GPIO45__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(45) | 2)
+#define PINMUX_GPIO45__FUNC_MCUPM_JTAG_TDI (MTK_PIN_NO(45) | 3)
+#define PINMUX_GPIO45__FUNC_APU_JTAG_TDI (MTK_PIN_NO(45) | 4)
+#define PINMUX_GPIO45__FUNC_CCU_JTAG_TDI (MTK_PIN_NO(45) | 5)
+#define PINMUX_GPIO45__FUNC_LVTS_SCK (MTK_PIN_NO(45) | 6)
+
+#define PINMUX_GPIO46__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define PINMUX_GPIO46__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(46) | 1)
+#define PINMUX_GPIO46__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(46) | 2)
+#define PINMUX_GPIO46__FUNC_MCUPM_JTAG_TMS (MTK_PIN_NO(46) | 3)
+#define PINMUX_GPIO46__FUNC_APU_JTAG_TMS (MTK_PIN_NO(46) | 4)
+#define PINMUX_GPIO46__FUNC_CCU_JTAG_TMS (MTK_PIN_NO(46) | 5)
+#define PINMUX_GPIO46__FUNC_LVTS_SDI (MTK_PIN_NO(46) | 6)
+
+#define PINMUX_GPIO47__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define PINMUX_GPIO47__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(47) | 1)
+#define PINMUX_GPIO47__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(47) | 2)
+#define PINMUX_GPIO47__FUNC_MCUPM_JTAG_TDO (MTK_PIN_NO(47) | 3)
+#define PINMUX_GPIO47__FUNC_APU_JTAG_TDO (MTK_PIN_NO(47) | 4)
+#define PINMUX_GPIO47__FUNC_CCU_JTAG_TDO (MTK_PIN_NO(47) | 5)
+#define PINMUX_GPIO47__FUNC_LVTS_SCF (MTK_PIN_NO(47) | 6)
+
+#define PINMUX_GPIO48__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define PINMUX_GPIO48__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(48) | 1)
+#define PINMUX_GPIO48__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(48) | 2)
+#define PINMUX_GPIO48__FUNC_MCUPM_JTAG_TRSTN (MTK_PIN_NO(48) | 3)
+#define PINMUX_GPIO48__FUNC_APU_JTAG_TRST (MTK_PIN_NO(48) | 4)
+#define PINMUX_GPIO48__FUNC_CCU_JTAG_TRST (MTK_PIN_NO(48) | 5)
+#define PINMUX_GPIO48__FUNC_LVTS_FOUT (MTK_PIN_NO(48) | 6)
+
+#define PINMUX_GPIO49__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define PINMUX_GPIO49__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(49) | 1)
+#define PINMUX_GPIO49__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(49) | 2)
+#define PINMUX_GPIO49__FUNC_MCUPM_JTAG_TCK (MTK_PIN_NO(49) | 3)
+#define PINMUX_GPIO49__FUNC_APU_JTAG_TCK (MTK_PIN_NO(49) | 4)
+#define PINMUX_GPIO49__FUNC_CCU_JTAG_TCK (MTK_PIN_NO(49) | 5)
+#define PINMUX_GPIO49__FUNC_LVTS_SDO (MTK_PIN_NO(49) | 6)
+
+#define PINMUX_GPIO50__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define PINMUX_GPIO50__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(50) | 1)
+#define PINMUX_GPIO50__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(50) | 2)
+#define PINMUX_GPIO50__FUNC_LVTS_26M (MTK_PIN_NO(50) | 6)
+
+#define PINMUX_GPIO51__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define PINMUX_GPIO51__FUNC_MSDC1_CLK (MTK_PIN_NO(51) | 1)
+#define PINMUX_GPIO51__FUNC_PCM1_CLK (MTK_PIN_NO(51) | 2)
+#define PINMUX_GPIO51__FUNC_VPU_UDI_TCK (MTK_PIN_NO(51) | 3)
+#define PINMUX_GPIO51__FUNC_UDI_TCK (MTK_PIN_NO(51) | 4)
+#define PINMUX_GPIO51__FUNC_IPU_JTAG_TCK (MTK_PIN_NO(51) | 5)
+#define PINMUX_GPIO51__FUNC_SSPM_JTAG_TCK (MTK_PIN_NO(51) | 6)
+#define PINMUX_GPIO51__FUNC_JTCK_SEL3 (MTK_PIN_NO(51) | 7)
+
+#define PINMUX_GPIO52__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define PINMUX_GPIO52__FUNC_MSDC1_CMD (MTK_PIN_NO(52) | 1)
+#define PINMUX_GPIO52__FUNC_PCM1_SYNC (MTK_PIN_NO(52) | 2)
+#define PINMUX_GPIO52__FUNC_VPU_UDI_TMS (MTK_PIN_NO(52) | 3)
+#define PINMUX_GPIO52__FUNC_UDI_TMS (MTK_PIN_NO(52) | 4)
+#define PINMUX_GPIO52__FUNC_IPU_JTAG_TMS (MTK_PIN_NO(52) | 5)
+#define PINMUX_GPIO52__FUNC_SSPM_JTAG_TMS (MTK_PIN_NO(52) | 6)
+#define PINMUX_GPIO52__FUNC_JTMS_SEL3 (MTK_PIN_NO(52) | 7)
+
+#define PINMUX_GPIO53__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define PINMUX_GPIO53__FUNC_MSDC1_DAT3 (MTK_PIN_NO(53) | 1)
+#define PINMUX_GPIO53__FUNC_PCM1_DI (MTK_PIN_NO(53) | 2)
+
+#define PINMUX_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define PINMUX_GPIO54__FUNC_MSDC1_DAT0 (MTK_PIN_NO(54) | 1)
+#define PINMUX_GPIO54__FUNC_PCM1_DO0 (MTK_PIN_NO(54) | 2)
+#define PINMUX_GPIO54__FUNC_VPU_UDI_TDI (MTK_PIN_NO(54) | 3)
+#define PINMUX_GPIO54__FUNC_UDI_TDI (MTK_PIN_NO(54) | 4)
+#define PINMUX_GPIO54__FUNC_IPU_JTAG_TDI (MTK_PIN_NO(54) | 5)
+#define PINMUX_GPIO54__FUNC_SSPM_JTAG_TDI (MTK_PIN_NO(54) | 6)
+#define PINMUX_GPIO54__FUNC_JTDI_SEL3 (MTK_PIN_NO(54) | 7)
+
+#define PINMUX_GPIO55__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define PINMUX_GPIO55__FUNC_MSDC1_DAT2 (MTK_PIN_NO(55) | 1)
+#define PINMUX_GPIO55__FUNC_PCM1_DO2 (MTK_PIN_NO(55) | 2)
+#define PINMUX_GPIO55__FUNC_VPU_UDI_NTRST (MTK_PIN_NO(55) | 3)
+#define PINMUX_GPIO55__FUNC_UDI_NTRST (MTK_PIN_NO(55) | 4)
+#define PINMUX_GPIO55__FUNC_IPU_JTAG_TRST (MTK_PIN_NO(55) | 5)
+#define PINMUX_GPIO55__FUNC_SSPM_JTAG_TRSTN (MTK_PIN_NO(55) | 6)
+#define PINMUX_GPIO55__FUNC_JTRSTN_SEL3 (MTK_PIN_NO(55) | 7)
+
+#define PINMUX_GPIO56__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define PINMUX_GPIO56__FUNC_MSDC1_DAT1 (MTK_PIN_NO(56) | 1)
+#define PINMUX_GPIO56__FUNC_PCM1_DO1 (MTK_PIN_NO(56) | 2)
+#define PINMUX_GPIO56__FUNC_VPU_UDI_TDO (MTK_PIN_NO(56) | 3)
+#define PINMUX_GPIO56__FUNC_UDI_TDO (MTK_PIN_NO(56) | 4)
+#define PINMUX_GPIO56__FUNC_IPU_JTAG_TDO (MTK_PIN_NO(56) | 5)
+#define PINMUX_GPIO56__FUNC_SSPM_JTAG_TDO (MTK_PIN_NO(56) | 6)
+#define PINMUX_GPIO56__FUNC_JTDO_SEL3 (MTK_PIN_NO(56) | 7)
+
+#define PINMUX_GPIO57__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define PINMUX_GPIO57__FUNC_MIPI2_D_SCLK (MTK_PIN_NO(57) | 1)
+#define PINMUX_GPIO57__FUNC_DBG_MON_A14 (MTK_PIN_NO(57) | 7)
+
+#define PINMUX_GPIO58__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define PINMUX_GPIO58__FUNC_MIPI2_D_SDATA (MTK_PIN_NO(58) | 1)
+#define PINMUX_GPIO58__FUNC_DBG_MON_A15 (MTK_PIN_NO(58) | 7)
+
+#define PINMUX_GPIO59__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define PINMUX_GPIO59__FUNC_MIPI_M_SCLK (MTK_PIN_NO(59) | 1)
+#define PINMUX_GPIO59__FUNC_DBG_MON_A17 (MTK_PIN_NO(59) | 7)
+
+#define PINMUX_GPIO60__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define PINMUX_GPIO60__FUNC_MIPI_M_SDATA (MTK_PIN_NO(60) | 1)
+#define PINMUX_GPIO60__FUNC_DBG_MON_A18 (MTK_PIN_NO(60) | 7)
+
+#define PINMUX_GPIO61__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define PINMUX_GPIO61__FUNC_MD_UCNT_A_TGL (MTK_PIN_NO(61) | 1)
+#define PINMUX_GPIO61__FUNC_DBG_MON_A16 (MTK_PIN_NO(61) | 7)
+
+#define PINMUX_GPIO62__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define PINMUX_GPIO62__FUNC_DIGRF_IRQ (MTK_PIN_NO(62) | 1)
+
+#define PINMUX_GPIO63__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define PINMUX_GPIO63__FUNC_BPI_BUS0 (MTK_PIN_NO(63) | 1)
+#define PINMUX_GPIO63__FUNC_DBG_MON_A19 (MTK_PIN_NO(63) | 7)
+
+#define PINMUX_GPIO64__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define PINMUX_GPIO64__FUNC_BPI_BUS1 (MTK_PIN_NO(64) | 1)
+#define PINMUX_GPIO64__FUNC_DBG_MON_A20 (MTK_PIN_NO(64) | 7)
+
+#define PINMUX_GPIO65__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define PINMUX_GPIO65__FUNC_BPI_BUS2 (MTK_PIN_NO(65) | 1)
+#define PINMUX_GPIO65__FUNC_DBG_MON_A21 (MTK_PIN_NO(65) | 7)
+
+#define PINMUX_GPIO66__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define PINMUX_GPIO66__FUNC_BPI_BUS3 (MTK_PIN_NO(66) | 1)
+#define PINMUX_GPIO66__FUNC_DBG_MON_A22 (MTK_PIN_NO(66) | 7)
+
+#define PINMUX_GPIO67__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define PINMUX_GPIO67__FUNC_BPI_BUS4 (MTK_PIN_NO(67) | 1)
+
+#define PINMUX_GPIO68__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define PINMUX_GPIO68__FUNC_BPI_BUS5 (MTK_PIN_NO(68) | 1)
+
+#define PINMUX_GPIO69__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define PINMUX_GPIO69__FUNC_BPI_BUS6 (MTK_PIN_NO(69) | 1)
+#define PINMUX_GPIO69__FUNC_CONN_BPI_BUS6 (MTK_PIN_NO(69) | 2)
+
+#define PINMUX_GPIO70__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define PINMUX_GPIO70__FUNC_BPI_BUS7 (MTK_PIN_NO(70) | 1)
+#define PINMUX_GPIO70__FUNC_CONN_BPI_BUS7 (MTK_PIN_NO(70) | 2)
+
+#define PINMUX_GPIO71__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define PINMUX_GPIO71__FUNC_BPI_BUS8 (MTK_PIN_NO(71) | 1)
+#define PINMUX_GPIO71__FUNC_CONN_BPI_BUS8 (MTK_PIN_NO(71) | 2)
+
+#define PINMUX_GPIO72__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define PINMUX_GPIO72__FUNC_BPI_BUS9 (MTK_PIN_NO(72) | 1)
+#define PINMUX_GPIO72__FUNC_CONN_BPI_BUS9 (MTK_PIN_NO(72) | 2)
+
+#define PINMUX_GPIO73__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define PINMUX_GPIO73__FUNC_BPI_BUS10 (MTK_PIN_NO(73) | 1)
+#define PINMUX_GPIO73__FUNC_CONN_BPI_BUS10 (MTK_PIN_NO(73) | 2)
+
+#define PINMUX_GPIO74__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define PINMUX_GPIO74__FUNC_BPI_BUS11_OLAT0 (MTK_PIN_NO(74) | 1)
+#define PINMUX_GPIO74__FUNC_CONN_BPI_BUS11_OLAT0 (MTK_PIN_NO(74) | 2)
+
+#define PINMUX_GPIO75__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define PINMUX_GPIO75__FUNC_BPI_BUS12_OLAT1 (MTK_PIN_NO(75) | 1)
+#define PINMUX_GPIO75__FUNC_CONN_BPI_BUS12_OLAT1 (MTK_PIN_NO(75) | 2)
+
+#define PINMUX_GPIO76__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define PINMUX_GPIO76__FUNC_BPI_BUS13_OLAT2 (MTK_PIN_NO(76) | 1)
+#define PINMUX_GPIO76__FUNC_CONN_BPI_BUS13_OLAT2 (MTK_PIN_NO(76) | 2)
+
+#define PINMUX_GPIO77__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define PINMUX_GPIO77__FUNC_BPI_BUS14_OLAT3 (MTK_PIN_NO(77) | 1)
+#define PINMUX_GPIO77__FUNC_CONN_BPI_BUS14_OLAT3 (MTK_PIN_NO(77) | 2)
+
+#define PINMUX_GPIO78__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define PINMUX_GPIO78__FUNC_BPI_BUS15_OLAT4 (MTK_PIN_NO(78) | 1)
+#define PINMUX_GPIO78__FUNC_CONN_BPI_BUS15_OLAT4 (MTK_PIN_NO(78) | 2)
+#define PINMUX_GPIO78__FUNC_DBG_MON_A7 (MTK_PIN_NO(78) | 7)
+
+#define PINMUX_GPIO79__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define PINMUX_GPIO79__FUNC_BPI_BUS16_OLAT5 (MTK_PIN_NO(79) | 1)
+#define PINMUX_GPIO79__FUNC_CONN_BPI_BUS16_OLAT5 (MTK_PIN_NO(79) | 2)
+#define PINMUX_GPIO79__FUNC_DBG_MON_A8 (MTK_PIN_NO(79) | 7)
+
+#define PINMUX_GPIO80__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define PINMUX_GPIO80__FUNC_BPI_BUS17_ANT0 (MTK_PIN_NO(80) | 1)
+#define PINMUX_GPIO80__FUNC_CONN_BPI_BUS17_ANT0 (MTK_PIN_NO(80) | 2)
+#define PINMUX_GPIO80__FUNC_DBG_MON_A9 (MTK_PIN_NO(80) | 7)
+
+#define PINMUX_GPIO81__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define PINMUX_GPIO81__FUNC_BPI_BUS18_ANT1 (MTK_PIN_NO(81) | 1)
+#define PINMUX_GPIO81__FUNC_CONN_BPI_BUS18_ANT1 (MTK_PIN_NO(81) | 2)
+#define PINMUX_GPIO81__FUNC_DBG_MON_A10 (MTK_PIN_NO(81) | 7)
+
+#define PINMUX_GPIO82__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define PINMUX_GPIO82__FUNC_BPI_BUS19_ANT2 (MTK_PIN_NO(82) | 1)
+#define PINMUX_GPIO82__FUNC_CONN_BPI_BUS19_ANT2 (MTK_PIN_NO(82) | 2)
+#define PINMUX_GPIO82__FUNC_DBG_MON_A11 (MTK_PIN_NO(82) | 7)
+
+#define PINMUX_GPIO83__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define PINMUX_GPIO83__FUNC_BPI_BUS20_ANT3 (MTK_PIN_NO(83) | 1)
+#define PINMUX_GPIO83__FUNC_CONN_BPI_BUS20_ANT3 (MTK_PIN_NO(83) | 2)
+#define PINMUX_GPIO83__FUNC_DBG_MON_A12 (MTK_PIN_NO(83) | 7)
+
+#define PINMUX_GPIO84__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define PINMUX_GPIO84__FUNC_BPI_BUS21_ANT4 (MTK_PIN_NO(84) | 1)
+#define PINMUX_GPIO84__FUNC_CONN_BPI_BUS21_ANT4 (MTK_PIN_NO(84) | 2)
+#define PINMUX_GPIO84__FUNC_DBG_MON_A13 (MTK_PIN_NO(84) | 7)
+
+#define PINMUX_GPIO85__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define PINMUX_GPIO85__FUNC_MIPI1_D_SCLK (MTK_PIN_NO(85) | 1)
+#define PINMUX_GPIO85__FUNC_CONN_MIPI1_SCLK (MTK_PIN_NO(85) | 2)
+
+#define PINMUX_GPIO86__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define PINMUX_GPIO86__FUNC_MIPI1_D_SDATA (MTK_PIN_NO(86) | 1)
+#define PINMUX_GPIO86__FUNC_CONN_MIPI1_SDATA (MTK_PIN_NO(86) | 2)
+
+#define PINMUX_GPIO87__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define PINMUX_GPIO87__FUNC_MIPI0_D_SCLK (MTK_PIN_NO(87) | 1)
+#define PINMUX_GPIO87__FUNC_CONN_MIPI0_SCLK (MTK_PIN_NO(87) | 2)
+
+#define PINMUX_GPIO88__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define PINMUX_GPIO88__FUNC_MIPI0_D_SDATA (MTK_PIN_NO(88) | 1)
+#define PINMUX_GPIO88__FUNC_CONN_MIPI0_SDATA (MTK_PIN_NO(88) | 2)
+
+#define PINMUX_GPIO89__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define PINMUX_GPIO89__FUNC_SPMI_SCL (MTK_PIN_NO(89) | 1)
+#define PINMUX_GPIO89__FUNC_SCL10 (MTK_PIN_NO(89) | 2)
+
+#define PINMUX_GPIO90__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define PINMUX_GPIO90__FUNC_SPMI_SDA (MTK_PIN_NO(90) | 1)
+#define PINMUX_GPIO90__FUNC_SDA10 (MTK_PIN_NO(90) | 2)
+
+#define PINMUX_GPIO91__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define PINMUX_GPIO91__FUNC_AP_GOOD (MTK_PIN_NO(91) | 1)
+
+#define PINMUX_GPIO92__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define PINMUX_GPIO92__FUNC_URXD0 (MTK_PIN_NO(92) | 1)
+#define PINMUX_GPIO92__FUNC_MD_URXD0 (MTK_PIN_NO(92) | 2)
+#define PINMUX_GPIO92__FUNC_MD_URXD1 (MTK_PIN_NO(92) | 3)
+#define PINMUX_GPIO92__FUNC_SSPM_URXD_AO (MTK_PIN_NO(92) | 4)
+#define PINMUX_GPIO92__FUNC_CONN_BGF_UART0_RXD (MTK_PIN_NO(92) | 5)
+
+#define PINMUX_GPIO93__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define PINMUX_GPIO93__FUNC_UTXD0 (MTK_PIN_NO(93) | 1)
+#define PINMUX_GPIO93__FUNC_MD_UTXD0 (MTK_PIN_NO(93) | 2)
+#define PINMUX_GPIO93__FUNC_MD_UTXD1 (MTK_PIN_NO(93) | 3)
+#define PINMUX_GPIO93__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(93) | 4)
+#define PINMUX_GPIO93__FUNC_CONN_BGF_UART0_TXD (MTK_PIN_NO(93) | 5)
+#define PINMUX_GPIO93__FUNC_WIFI_TXD (MTK_PIN_NO(93) | 6)
+
+#define PINMUX_GPIO94__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define PINMUX_GPIO94__FUNC_URXD1 (MTK_PIN_NO(94) | 1)
+#define PINMUX_GPIO94__FUNC_ADSP_URXD0 (MTK_PIN_NO(94) | 2)
+#define PINMUX_GPIO94__FUNC_MD32_0_RXD (MTK_PIN_NO(94) | 3)
+#define PINMUX_GPIO94__FUNC_SSPM_URXD_AO (MTK_PIN_NO(94) | 4)
+#define PINMUX_GPIO94__FUNC_TP_URXD1_AO (MTK_PIN_NO(94) | 5)
+#define PINMUX_GPIO94__FUNC_TP_URXD2_AO (MTK_PIN_NO(94) | 6)
+#define PINMUX_GPIO94__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(94) | 7)
+
+#define PINMUX_GPIO95__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define PINMUX_GPIO95__FUNC_UTXD1 (MTK_PIN_NO(95) | 1)
+#define PINMUX_GPIO95__FUNC_ADSP_UTXD0 (MTK_PIN_NO(95) | 2)
+#define PINMUX_GPIO95__FUNC_MD32_0_TXD (MTK_PIN_NO(95) | 3)
+#define PINMUX_GPIO95__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(95) | 4)
+#define PINMUX_GPIO95__FUNC_TP_UTXD1_AO (MTK_PIN_NO(95) | 5)
+#define PINMUX_GPIO95__FUNC_TP_UTXD2_AO (MTK_PIN_NO(95) | 6)
+#define PINMUX_GPIO95__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(95) | 7)
+
+#define PINMUX_GPIO96__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define PINMUX_GPIO96__FUNC_TDM_LRCK (MTK_PIN_NO(96) | 1)
+#define PINMUX_GPIO96__FUNC_I2S7_LRCK (MTK_PIN_NO(96) | 2)
+#define PINMUX_GPIO96__FUNC_I2S9_LRCK (MTK_PIN_NO(96) | 3)
+#define PINMUX_GPIO96__FUNC_SPI4_A_CLK (MTK_PIN_NO(96) | 4)
+#define PINMUX_GPIO96__FUNC_ADSP_JTAG0_TDI (MTK_PIN_NO(96) | 5)
+#define PINMUX_GPIO96__FUNC_CONN_BGF_DSP_L1_JDI (MTK_PIN_NO(96) | 6)
+#define PINMUX_GPIO96__FUNC_IO_JTAG_TDI (MTK_PIN_NO(96) | 7)
+
+#define PINMUX_GPIO97__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define PINMUX_GPIO97__FUNC_TDM_BCK (MTK_PIN_NO(97) | 1)
+#define PINMUX_GPIO97__FUNC_I2S7_BCK (MTK_PIN_NO(97) | 2)
+#define PINMUX_GPIO97__FUNC_I2S9_BCK (MTK_PIN_NO(97) | 3)
+#define PINMUX_GPIO97__FUNC_SPI4_A_CSB (MTK_PIN_NO(97) | 4)
+#define PINMUX_GPIO97__FUNC_ADSP_JTAG0_TRSTN (MTK_PIN_NO(97) | 5)
+#define PINMUX_GPIO97__FUNC_CONN_BGF_DSP_L1_JINTP (MTK_PIN_NO(97) | 6)
+#define PINMUX_GPIO97__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(97) | 7)
+
+#define PINMUX_GPIO98__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define PINMUX_GPIO98__FUNC_TDM_MCK (MTK_PIN_NO(98) | 1)
+#define PINMUX_GPIO98__FUNC_I2S7_MCK (MTK_PIN_NO(98) | 2)
+#define PINMUX_GPIO98__FUNC_I2S9_MCK (MTK_PIN_NO(98) | 3)
+#define PINMUX_GPIO98__FUNC_SPI4_A_MI (MTK_PIN_NO(98) | 4)
+#define PINMUX_GPIO98__FUNC_ADSP_JTAG0_TCK (MTK_PIN_NO(98) | 5)
+#define PINMUX_GPIO98__FUNC_CONN_BGF_DSP_L1_JCK (MTK_PIN_NO(98) | 6)
+#define PINMUX_GPIO98__FUNC_IO_JTAG_TCK (MTK_PIN_NO(98) | 7)
+
+#define PINMUX_GPIO99__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define PINMUX_GPIO99__FUNC_TDM_DATA0 (MTK_PIN_NO(99) | 1)
+#define PINMUX_GPIO99__FUNC_I2S6_DI (MTK_PIN_NO(99) | 2)
+#define PINMUX_GPIO99__FUNC_I2S8_DI (MTK_PIN_NO(99) | 3)
+#define PINMUX_GPIO99__FUNC_SPI4_A_MO (MTK_PIN_NO(99) | 4)
+#define PINMUX_GPIO99__FUNC_ADSP_JTAG0_TDO (MTK_PIN_NO(99) | 5)
+#define PINMUX_GPIO99__FUNC_CONN_BGF_DSP_L1_JDO (MTK_PIN_NO(99) | 6)
+#define PINMUX_GPIO99__FUNC_IO_JTAG_TDO (MTK_PIN_NO(99) | 7)
+
+#define PINMUX_GPIO100__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define PINMUX_GPIO100__FUNC_TDM_DATA1 (MTK_PIN_NO(100) | 1)
+#define PINMUX_GPIO100__FUNC_I2S7_DO (MTK_PIN_NO(100) | 2)
+#define PINMUX_GPIO100__FUNC_I2S9_DO (MTK_PIN_NO(100) | 3)
+#define PINMUX_GPIO100__FUNC_DP_TX_HPD (MTK_PIN_NO(100) | 4)
+#define PINMUX_GPIO100__FUNC_ADSP_JTAG0_TMS (MTK_PIN_NO(100) | 5)
+#define PINMUX_GPIO100__FUNC_CONN_BGF_DSP_L1_JMS (MTK_PIN_NO(100) | 6)
+#define PINMUX_GPIO100__FUNC_IO_JTAG_TMS (MTK_PIN_NO(100) | 7)
+
+#define PINMUX_GPIO101__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define PINMUX_GPIO101__FUNC_TDM_DATA2 (MTK_PIN_NO(101) | 1)
+#define PINMUX_GPIO101__FUNC_DMIC1_CLK (MTK_PIN_NO(101) | 2)
+#define PINMUX_GPIO101__FUNC_SRCLKENAI0 (MTK_PIN_NO(101) | 3)
+#define PINMUX_GPIO101__FUNC_SPI5_B_CLK (MTK_PIN_NO(101) | 4)
+#define PINMUX_GPIO101__FUNC_CLKM0 (MTK_PIN_NO(101) | 5)
+#define PINMUX_GPIO101__FUNC_DAP_MD32_SWD (MTK_PIN_NO(101) | 7)
+
+#define PINMUX_GPIO102__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define PINMUX_GPIO102__FUNC_TDM_DATA3 (MTK_PIN_NO(102) | 1)
+#define PINMUX_GPIO102__FUNC_DMIC1_DAT (MTK_PIN_NO(102) | 2)
+#define PINMUX_GPIO102__FUNC_SRCLKENAI1 (MTK_PIN_NO(102) | 3)
+#define PINMUX_GPIO102__FUNC_SPI5_B_CSB (MTK_PIN_NO(102) | 4)
+#define PINMUX_GPIO102__FUNC_DP_TX_HPD (MTK_PIN_NO(102) | 5)
+#define PINMUX_GPIO102__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(102) | 6)
+#define PINMUX_GPIO102__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(102) | 7)
+
+#define PINMUX_GPIO103__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define PINMUX_GPIO103__FUNC_SPI0_A_MI (MTK_PIN_NO(103) | 1)
+#define PINMUX_GPIO103__FUNC_SCP_SPI0_MI (MTK_PIN_NO(103) | 2)
+#define PINMUX_GPIO103__FUNC_DFD_TDO (MTK_PIN_NO(103) | 5)
+#define PINMUX_GPIO103__FUNC_SPM_JTAG_TDO (MTK_PIN_NO(103) | 6)
+#define PINMUX_GPIO103__FUNC_JTDO_SEL1 (MTK_PIN_NO(103) | 7)
+
+#define PINMUX_GPIO104__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define PINMUX_GPIO104__FUNC_SPI0_A_CSB (MTK_PIN_NO(104) | 1)
+#define PINMUX_GPIO104__FUNC_SCP_SPI0_CS (MTK_PIN_NO(104) | 2)
+#define PINMUX_GPIO104__FUNC_DFD_TMS (MTK_PIN_NO(104) | 5)
+#define PINMUX_GPIO104__FUNC_SPM_JTAG_TMS (MTK_PIN_NO(104) | 6)
+#define PINMUX_GPIO104__FUNC_JTMS_SEL1 (MTK_PIN_NO(104) | 7)
+
+#define PINMUX_GPIO105__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define PINMUX_GPIO105__FUNC_SPI0_A_MO (MTK_PIN_NO(105) | 1)
+#define PINMUX_GPIO105__FUNC_SCP_SPI0_MO (MTK_PIN_NO(105) | 2)
+#define PINMUX_GPIO105__FUNC_SCP_SDA0 (MTK_PIN_NO(105) | 3)
+#define PINMUX_GPIO105__FUNC_DFD_TDI (MTK_PIN_NO(105) | 5)
+#define PINMUX_GPIO105__FUNC_SPM_JTAG_TDI (MTK_PIN_NO(105) | 6)
+#define PINMUX_GPIO105__FUNC_JTDI_SEL1 (MTK_PIN_NO(105) | 7)
+
+#define PINMUX_GPIO106__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define PINMUX_GPIO106__FUNC_SPI0_A_CLK (MTK_PIN_NO(106) | 1)
+#define PINMUX_GPIO106__FUNC_SCP_SPI0_CK (MTK_PIN_NO(106) | 2)
+#define PINMUX_GPIO106__FUNC_SCP_SCL0 (MTK_PIN_NO(106) | 3)
+#define PINMUX_GPIO106__FUNC_DFD_TCK_XI (MTK_PIN_NO(106) | 5)
+#define PINMUX_GPIO106__FUNC_SPM_JTAG_TCK (MTK_PIN_NO(106) | 6)
+#define PINMUX_GPIO106__FUNC_JTCK_SEL1 (MTK_PIN_NO(106) | 7)
+
+#define PINMUX_GPIO107__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define PINMUX_GPIO107__FUNC_DMIC_CLK (MTK_PIN_NO(107) | 1)
+#define PINMUX_GPIO107__FUNC_PWM_0 (MTK_PIN_NO(107) | 2)
+#define PINMUX_GPIO107__FUNC_CLKM2 (MTK_PIN_NO(107) | 3)
+#define PINMUX_GPIO107__FUNC_SPI5_B_MI (MTK_PIN_NO(107) | 4)
+#define PINMUX_GPIO107__FUNC_SPM_JTAG_TRSTN (MTK_PIN_NO(107) | 6)
+#define PINMUX_GPIO107__FUNC_JTRSTN_SEL1 (MTK_PIN_NO(107) | 7)
+
+#define PINMUX_GPIO108__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define PINMUX_GPIO108__FUNC_DMIC_DAT (MTK_PIN_NO(108) | 1)
+#define PINMUX_GPIO108__FUNC_PWM_1 (MTK_PIN_NO(108) | 2)
+#define PINMUX_GPIO108__FUNC_CLKM3 (MTK_PIN_NO(108) | 3)
+#define PINMUX_GPIO108__FUNC_SPI5_B_MO (MTK_PIN_NO(108) | 4)
+#define PINMUX_GPIO108__FUNC_DAP_SONIC_SWD (MTK_PIN_NO(108) | 7)
+
+#define PINMUX_GPIO109__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define PINMUX_GPIO109__FUNC_I2S1_MCK (MTK_PIN_NO(109) | 1)
+#define PINMUX_GPIO109__FUNC_I2S3_MCK (MTK_PIN_NO(109) | 2)
+#define PINMUX_GPIO109__FUNC_I2S2_MCK (MTK_PIN_NO(109) | 3)
+#define PINMUX_GPIO109__FUNC_DP_TX_HPD (MTK_PIN_NO(109) | 4)
+#define PINMUX_GPIO109__FUNC_I2S2_MCK_A (MTK_PIN_NO(109) | 5)
+#define PINMUX_GPIO109__FUNC_SRCLKENAI0 (MTK_PIN_NO(109) | 6)
+#define PINMUX_GPIO109__FUNC_DAP_SONIC_SWCK (MTK_PIN_NO(109) | 7)
+
+#define PINMUX_GPIO110__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define PINMUX_GPIO110__FUNC_I2S1_BCK (MTK_PIN_NO(110) | 1)
+#define PINMUX_GPIO110__FUNC_I2S3_BCK (MTK_PIN_NO(110) | 2)
+#define PINMUX_GPIO110__FUNC_I2S2_BCK (MTK_PIN_NO(110) | 3)
+#define PINMUX_GPIO110__FUNC_PCM0_CLK (MTK_PIN_NO(110) | 4)
+#define PINMUX_GPIO110__FUNC_I2S2_BCK_A (MTK_PIN_NO(110) | 5)
+#define PINMUX_GPIO110__FUNC_CONN_BGF_MCU_TDO (MTK_PIN_NO(110) | 6)
+
+#define PINMUX_GPIO111__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define PINMUX_GPIO111__FUNC_I2S1_LRCK (MTK_PIN_NO(111) | 1)
+#define PINMUX_GPIO111__FUNC_I2S3_LRCK (MTK_PIN_NO(111) | 2)
+#define PINMUX_GPIO111__FUNC_I2S2_LRCK (MTK_PIN_NO(111) | 3)
+#define PINMUX_GPIO111__FUNC_PCM0_SYNC (MTK_PIN_NO(111) | 4)
+#define PINMUX_GPIO111__FUNC_I2S2_LRCK_A (MTK_PIN_NO(111) | 5)
+#define PINMUX_GPIO111__FUNC_CONN_BGF_MCU_TDI (MTK_PIN_NO(111) | 6)
+
+#define PINMUX_GPIO112__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define PINMUX_GPIO112__FUNC_I2S2_DI (MTK_PIN_NO(112) | 1)
+#define PINMUX_GPIO112__FUNC_I2S0_DI (MTK_PIN_NO(112) | 2)
+#define PINMUX_GPIO112__FUNC_I2S2_DI2 (MTK_PIN_NO(112) | 3)
+#define PINMUX_GPIO112__FUNC_PCM0_DI (MTK_PIN_NO(112) | 4)
+#define PINMUX_GPIO112__FUNC_I2S2_DI_A (MTK_PIN_NO(112) | 5)
+#define PINMUX_GPIO112__FUNC_CONN_BGF_MCU_TMS (MTK_PIN_NO(112) | 6)
+
+#define PINMUX_GPIO113__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define PINMUX_GPIO113__FUNC_I2S1_DO (MTK_PIN_NO(113) | 1)
+#define PINMUX_GPIO113__FUNC_I2S3_DO (MTK_PIN_NO(113) | 2)
+#define PINMUX_GPIO113__FUNC_I2S5_DO (MTK_PIN_NO(113) | 3)
+#define PINMUX_GPIO113__FUNC_PCM0_DO (MTK_PIN_NO(113) | 4)
+#define PINMUX_GPIO113__FUNC_I2S2_DI2 (MTK_PIN_NO(113) | 5)
+#define PINMUX_GPIO113__FUNC_CONN_BGF_MCU_TCK (MTK_PIN_NO(113) | 6)
+
+#define PINMUX_GPIO114__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define PINMUX_GPIO114__FUNC_SPI2_MI (MTK_PIN_NO(114) | 1)
+#define PINMUX_GPIO114__FUNC_SCP_SPI2_MI (MTK_PIN_NO(114) | 2)
+#define PINMUX_GPIO114__FUNC_CONN_BGF_MCU_TRST_B (MTK_PIN_NO(114) | 6)
+
+#define PINMUX_GPIO115__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define PINMUX_GPIO115__FUNC_SPI2_CSB (MTK_PIN_NO(115) | 1)
+#define PINMUX_GPIO115__FUNC_SCP_SPI2_CS (MTK_PIN_NO(115) | 2)
+#define PINMUX_GPIO115__FUNC_CONN_BGF_MCU_DBGI_N (MTK_PIN_NO(115) | 6)
+
+#define PINMUX_GPIO116__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define PINMUX_GPIO116__FUNC_SPI2_MO (MTK_PIN_NO(116) | 1)
+#define PINMUX_GPIO116__FUNC_SCP_SPI2_MO (MTK_PIN_NO(116) | 2)
+#define PINMUX_GPIO116__FUNC_SCP_SDA1 (MTK_PIN_NO(116) | 3)
+#define PINMUX_GPIO116__FUNC_CONN_BGF_MCU_DBGACK_N (MTK_PIN_NO(116) | 6)
+
+#define PINMUX_GPIO117__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define PINMUX_GPIO117__FUNC_SPI2_CLK (MTK_PIN_NO(117) | 1)
+#define PINMUX_GPIO117__FUNC_SCP_SPI2_CK (MTK_PIN_NO(117) | 2)
+#define PINMUX_GPIO117__FUNC_SCP_SCL1 (MTK_PIN_NO(117) | 3)
+
+#define PINMUX_GPIO118__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define PINMUX_GPIO118__FUNC_SCL1 (MTK_PIN_NO(118) | 1)
+#define PINMUX_GPIO118__FUNC_SCP_SCL0 (MTK_PIN_NO(118) | 2)
+#define PINMUX_GPIO118__FUNC_SCP_SCL1 (MTK_PIN_NO(118) | 3)
+
+#define PINMUX_GPIO119__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define PINMUX_GPIO119__FUNC_SDA1 (MTK_PIN_NO(119) | 1)
+#define PINMUX_GPIO119__FUNC_SCP_SDA0 (MTK_PIN_NO(119) | 2)
+#define PINMUX_GPIO119__FUNC_SCP_SDA1 (MTK_PIN_NO(119) | 3)
+
+#define PINMUX_GPIO120__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define PINMUX_GPIO120__FUNC_SCL9 (MTK_PIN_NO(120) | 1)
+
+#define PINMUX_GPIO121__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define PINMUX_GPIO121__FUNC_SDA9 (MTK_PIN_NO(121) | 1)
+
+#define PINMUX_GPIO122__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define PINMUX_GPIO122__FUNC_SCL8 (MTK_PIN_NO(122) | 1)
+
+#define PINMUX_GPIO123__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define PINMUX_GPIO123__FUNC_SDA8 (MTK_PIN_NO(123) | 1)
+
+#define PINMUX_GPIO124__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define PINMUX_GPIO124__FUNC_SCL7 (MTK_PIN_NO(124) | 1)
+#define PINMUX_GPIO124__FUNC_DMIC1_CLK (MTK_PIN_NO(124) | 2)
+
+#define PINMUX_GPIO125__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define PINMUX_GPIO125__FUNC_SDA7 (MTK_PIN_NO(125) | 1)
+#define PINMUX_GPIO125__FUNC_DMIC1_DAT (MTK_PIN_NO(125) | 2)
+
+#define PINMUX_GPIO126__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define PINMUX_GPIO126__FUNC_CMFLASH0 (MTK_PIN_NO(126) | 1)
+#define PINMUX_GPIO126__FUNC_PWM_2 (MTK_PIN_NO(126) | 2)
+#define PINMUX_GPIO126__FUNC_TP_UCTS1_AO (MTK_PIN_NO(126) | 3)
+#define PINMUX_GPIO126__FUNC_UCTS0 (MTK_PIN_NO(126) | 4)
+#define PINMUX_GPIO126__FUNC_SCL11 (MTK_PIN_NO(126) | 5)
+#define PINMUX_GPIO126__FUNC_MD32_1_GPIO0 (MTK_PIN_NO(126) | 6)
+
+#define PINMUX_GPIO127__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define PINMUX_GPIO127__FUNC_CMFLASH1 (MTK_PIN_NO(127) | 1)
+#define PINMUX_GPIO127__FUNC_PWM_3 (MTK_PIN_NO(127) | 2)
+#define PINMUX_GPIO127__FUNC_TP_URTS1_AO (MTK_PIN_NO(127) | 3)
+#define PINMUX_GPIO127__FUNC_URTS0 (MTK_PIN_NO(127) | 4)
+#define PINMUX_GPIO127__FUNC_SDA11 (MTK_PIN_NO(127) | 5)
+#define PINMUX_GPIO127__FUNC_MD32_1_GPIO1 (MTK_PIN_NO(127) | 6)
+
+#define PINMUX_GPIO128__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define PINMUX_GPIO128__FUNC_CMFLASH2 (MTK_PIN_NO(128) | 1)
+#define PINMUX_GPIO128__FUNC_PWM_0 (MTK_PIN_NO(128) | 2)
+#define PINMUX_GPIO128__FUNC_TP_UCTS2_AO (MTK_PIN_NO(128) | 3)
+#define PINMUX_GPIO128__FUNC_UCTS1 (MTK_PIN_NO(128) | 4)
+#define PINMUX_GPIO128__FUNC_SCL12 (MTK_PIN_NO(128) | 5)
+#define PINMUX_GPIO128__FUNC_MD32_1_GPIO2 (MTK_PIN_NO(128) | 6)
+
+#define PINMUX_GPIO129__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define PINMUX_GPIO129__FUNC_CMFLASH3 (MTK_PIN_NO(129) | 1)
+#define PINMUX_GPIO129__FUNC_PWM_1 (MTK_PIN_NO(129) | 2)
+#define PINMUX_GPIO129__FUNC_TP_URTS2_AO (MTK_PIN_NO(129) | 3)
+#define PINMUX_GPIO129__FUNC_URTS1 (MTK_PIN_NO(129) | 4)
+#define PINMUX_GPIO129__FUNC_SDA12 (MTK_PIN_NO(129) | 5)
+
+#define PINMUX_GPIO130__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define PINMUX_GPIO130__FUNC_CMVREF0 (MTK_PIN_NO(130) | 1)
+#define PINMUX_GPIO130__FUNC_ANT_SEL10 (MTK_PIN_NO(130) | 2)
+#define PINMUX_GPIO130__FUNC_SCP_JTAG0_TDO (MTK_PIN_NO(130) | 3)
+#define PINMUX_GPIO130__FUNC_MD32_0_JTAG_TDO (MTK_PIN_NO(130) | 4)
+#define PINMUX_GPIO130__FUNC_SCL11 (MTK_PIN_NO(130) | 5)
+#define PINMUX_GPIO130__FUNC_CONN_WF_MCU_TDO (MTK_PIN_NO(130) | 6)
+#define PINMUX_GPIO130__FUNC_DBG_MON_A23 (MTK_PIN_NO(130) | 7)
+
+#define PINMUX_GPIO131__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define PINMUX_GPIO131__FUNC_CMVREF1 (MTK_PIN_NO(131) | 1)
+#define PINMUX_GPIO131__FUNC_ANT_SEL11 (MTK_PIN_NO(131) | 2)
+#define PINMUX_GPIO131__FUNC_SCP_JTAG0_TDI (MTK_PIN_NO(131) | 3)
+#define PINMUX_GPIO131__FUNC_MD32_0_JTAG_TDI (MTK_PIN_NO(131) | 4)
+#define PINMUX_GPIO131__FUNC_SDA11 (MTK_PIN_NO(131) | 5)
+#define PINMUX_GPIO131__FUNC_CONN_WF_MCU_TDI (MTK_PIN_NO(131) | 6)
+#define PINMUX_GPIO131__FUNC_DBG_MON_A26 (MTK_PIN_NO(131) | 7)
+
+#define PINMUX_GPIO132__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define PINMUX_GPIO132__FUNC_CMVREF2 (MTK_PIN_NO(132) | 1)
+#define PINMUX_GPIO132__FUNC_ANT_SEL12 (MTK_PIN_NO(132) | 2)
+#define PINMUX_GPIO132__FUNC_SCP_JTAG0_TMS (MTK_PIN_NO(132) | 3)
+#define PINMUX_GPIO132__FUNC_MD32_0_JTAG_TMS (MTK_PIN_NO(132) | 4)
+#define PINMUX_GPIO132__FUNC_CONN_WF_MCU_TMS (MTK_PIN_NO(132) | 6)
+#define PINMUX_GPIO132__FUNC_DBG_MON_A28 (MTK_PIN_NO(132) | 7)
+
+#define PINMUX_GPIO133__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define PINMUX_GPIO133__FUNC_CMVREF3 (MTK_PIN_NO(133) | 1)
+#define PINMUX_GPIO133__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(133) | 2)
+#define PINMUX_GPIO133__FUNC_SCP_JTAG0_TCK (MTK_PIN_NO(133) | 3)
+#define PINMUX_GPIO133__FUNC_MD32_0_JTAG_TCK (MTK_PIN_NO(133) | 4)
+#define PINMUX_GPIO133__FUNC_CONN_WF_MCU_TCK (MTK_PIN_NO(133) | 6)
+#define PINMUX_GPIO133__FUNC_DBG_MON_A24 (MTK_PIN_NO(133) | 7)
+
+#define PINMUX_GPIO134__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define PINMUX_GPIO134__FUNC_CMVREF4 (MTK_PIN_NO(134) | 1)
+#define PINMUX_GPIO134__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(134) | 2)
+#define PINMUX_GPIO134__FUNC_SCP_JTAG0_TRSTN (MTK_PIN_NO(134) | 3)
+#define PINMUX_GPIO134__FUNC_MD32_0_JTAG_TRST (MTK_PIN_NO(134) | 4)
+#define PINMUX_GPIO134__FUNC_CONN_WF_MCU_TRST_B (MTK_PIN_NO(134) | 6)
+#define PINMUX_GPIO134__FUNC_DBG_MON_A27 (MTK_PIN_NO(134) | 7)
+
+#define PINMUX_GPIO135__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
+#define PINMUX_GPIO135__FUNC_PWM_0 (MTK_PIN_NO(135) | 1)
+#define PINMUX_GPIO135__FUNC_SRCLKENAI1 (MTK_PIN_NO(135) | 2)
+#define PINMUX_GPIO135__FUNC_MD_URXD0 (MTK_PIN_NO(135) | 3)
+#define PINMUX_GPIO135__FUNC_MD32_0_RXD (MTK_PIN_NO(135) | 4)
+#define PINMUX_GPIO135__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(135) | 5)
+#define PINMUX_GPIO135__FUNC_CONN_WF_MCU_DBGI_N (MTK_PIN_NO(135) | 6)
+#define PINMUX_GPIO135__FUNC_DBG_MON_A29 (MTK_PIN_NO(135) | 7)
+
+#define PINMUX_GPIO136__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
+#define PINMUX_GPIO136__FUNC_CMMCLK3 (MTK_PIN_NO(136) | 1)
+#define PINMUX_GPIO136__FUNC_CLKM1 (MTK_PIN_NO(136) | 2)
+#define PINMUX_GPIO136__FUNC_MD_UTXD0 (MTK_PIN_NO(136) | 3)
+#define PINMUX_GPIO136__FUNC_MD32_0_TXD (MTK_PIN_NO(136) | 4)
+#define PINMUX_GPIO136__FUNC_CONN_BT_TXD (MTK_PIN_NO(136) | 5)
+#define PINMUX_GPIO136__FUNC_CONN_WF_MCU_DBGACK_N (MTK_PIN_NO(136) | 6)
+#define PINMUX_GPIO136__FUNC_DBG_MON_A25 (MTK_PIN_NO(136) | 7)
+
+#define PINMUX_GPIO137__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
+#define PINMUX_GPIO137__FUNC_CMMCLK4 (MTK_PIN_NO(137) | 1)
+#define PINMUX_GPIO137__FUNC_CLKM2 (MTK_PIN_NO(137) | 2)
+#define PINMUX_GPIO137__FUNC_MD_URXD1 (MTK_PIN_NO(137) | 3)
+#define PINMUX_GPIO137__FUNC_MD32_1_RXD (MTK_PIN_NO(137) | 4)
+#define PINMUX_GPIO137__FUNC_ILDO_DOUT0 (MTK_PIN_NO(137) | 5)
+#define PINMUX_GPIO137__FUNC_CONN_BGF_UART0_RXD (MTK_PIN_NO(137) | 6)
+
+#define PINMUX_GPIO138__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
+#define PINMUX_GPIO138__FUNC_CMMCLK5 (MTK_PIN_NO(138) | 1)
+#define PINMUX_GPIO138__FUNC_CLKM3 (MTK_PIN_NO(138) | 2)
+#define PINMUX_GPIO138__FUNC_MD_UTXD1 (MTK_PIN_NO(138) | 3)
+#define PINMUX_GPIO138__FUNC_MD32_1_TXD (MTK_PIN_NO(138) | 4)
+#define PINMUX_GPIO138__FUNC_ILDO_DOUT1 (MTK_PIN_NO(138) | 5)
+#define PINMUX_GPIO138__FUNC_CONN_BGF_UART0_TXD (MTK_PIN_NO(138) | 6)
+
+#define PINMUX_GPIO139__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
+#define PINMUX_GPIO139__FUNC_SCL4 (MTK_PIN_NO(139) | 1)
+
+#define PINMUX_GPIO140__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
+#define PINMUX_GPIO140__FUNC_SDA4 (MTK_PIN_NO(140) | 1)
+
+#define PINMUX_GPIO141__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
+#define PINMUX_GPIO141__FUNC_SCL2 (MTK_PIN_NO(141) | 1)
+
+#define PINMUX_GPIO142__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
+#define PINMUX_GPIO142__FUNC_SDA2 (MTK_PIN_NO(142) | 1)
+
+#define PINMUX_GPIO143__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
+#define PINMUX_GPIO143__FUNC_CMVREF0 (MTK_PIN_NO(143) | 1)
+#define PINMUX_GPIO143__FUNC_SPI3_CLK (MTK_PIN_NO(143) | 2)
+#define PINMUX_GPIO143__FUNC_ADSP_JTAG1_TDO (MTK_PIN_NO(143) | 3)
+#define PINMUX_GPIO143__FUNC_SCP_JTAG1_TDO (MTK_PIN_NO(143) | 4)
+#define PINMUX_GPIO143__FUNC_MD32_1_JTAG_TDO (MTK_PIN_NO(143) | 5)
+#define PINMUX_GPIO143__FUNC_CONN_BGF_DSP_L5_JDO (MTK_PIN_NO(143) | 6)
+
+#define PINMUX_GPIO144__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
+#define PINMUX_GPIO144__FUNC_CMVREF1 (MTK_PIN_NO(144) | 1)
+#define PINMUX_GPIO144__FUNC_SPI3_CSB (MTK_PIN_NO(144) | 2)
+#define PINMUX_GPIO144__FUNC_ADSP_JTAG1_TDI (MTK_PIN_NO(144) | 3)
+#define PINMUX_GPIO144__FUNC_SCP_JTAG1_TDI (MTK_PIN_NO(144) | 4)
+#define PINMUX_GPIO144__FUNC_MD32_1_JTAG_TDI (MTK_PIN_NO(144) | 5)
+#define PINMUX_GPIO144__FUNC_CONN_BGF_DSP_L5_JDI (MTK_PIN_NO(144) | 6)
+
+#define PINMUX_GPIO145__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
+#define PINMUX_GPIO145__FUNC_CMVREF2 (MTK_PIN_NO(145) | 1)
+#define PINMUX_GPIO145__FUNC_SPI3_MI (MTK_PIN_NO(145) | 2)
+#define PINMUX_GPIO145__FUNC_ADSP_JTAG1_TMS (MTK_PIN_NO(145) | 3)
+#define PINMUX_GPIO145__FUNC_SCP_JTAG1_TMS (MTK_PIN_NO(145) | 4)
+#define PINMUX_GPIO145__FUNC_MD32_1_JTAG_TMS (MTK_PIN_NO(145) | 5)
+#define PINMUX_GPIO145__FUNC_CONN_BGF_DSP_L5_JMS (MTK_PIN_NO(145) | 6)
+
+#define PINMUX_GPIO146__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
+#define PINMUX_GPIO146__FUNC_CMVREF3 (MTK_PIN_NO(146) | 1)
+#define PINMUX_GPIO146__FUNC_SPI3_MO (MTK_PIN_NO(146) | 2)
+#define PINMUX_GPIO146__FUNC_ADSP_JTAG1_TCK (MTK_PIN_NO(146) | 3)
+#define PINMUX_GPIO146__FUNC_SCP_JTAG1_TCK (MTK_PIN_NO(146) | 4)
+#define PINMUX_GPIO146__FUNC_MD32_1_JTAG_TCK (MTK_PIN_NO(146) | 5)
+#define PINMUX_GPIO146__FUNC_CONN_BGF_DSP_L5_JCK (MTK_PIN_NO(146) | 6)
+
+#define PINMUX_GPIO147__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
+#define PINMUX_GPIO147__FUNC_CMVREF4 (MTK_PIN_NO(147) | 1)
+#define PINMUX_GPIO147__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(147) | 2)
+#define PINMUX_GPIO147__FUNC_ADSP_JTAG1_TRSTN (MTK_PIN_NO(147) | 3)
+#define PINMUX_GPIO147__FUNC_SCP_JTAG1_TRSTN (MTK_PIN_NO(147) | 4)
+#define PINMUX_GPIO147__FUNC_MD32_1_JTAG_TRST (MTK_PIN_NO(147) | 5)
+#define PINMUX_GPIO147__FUNC_CONN_BGF_DSP_L5_JINTP (MTK_PIN_NO(147) | 6)
+
+#define PINMUX_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
+#define PINMUX_GPIO148__FUNC_PWM_1 (MTK_PIN_NO(148) | 1)
+#define PINMUX_GPIO148__FUNC_AGPS_SYNC (MTK_PIN_NO(148) | 2)
+#define PINMUX_GPIO148__FUNC_CMMCLK5 (MTK_PIN_NO(148) | 3)
+#define PINMUX_GPIO148__FUNC_CONN_WF_MCU_AICE_TMSC (MTK_PIN_NO(148) | 6)
+
+#define PINMUX_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
+#define PINMUX_GPIO149__FUNC_CMMCLK0 (MTK_PIN_NO(149) | 1)
+#define PINMUX_GPIO149__FUNC_CLKM0 (MTK_PIN_NO(149) | 2)
+#define PINMUX_GPIO149__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(149) | 3)
+#define PINMUX_GPIO149__FUNC_CONN_WF_MCU_AICE_TCKC (MTK_PIN_NO(149) | 6)
+
+#define PINMUX_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
+#define PINMUX_GPIO150__FUNC_CMMCLK1 (MTK_PIN_NO(150) | 1)
+#define PINMUX_GPIO150__FUNC_CLKM1 (MTK_PIN_NO(150) | 2)
+#define PINMUX_GPIO150__FUNC_MD32_0_GPIO1 (MTK_PIN_NO(150) | 3)
+#define PINMUX_GPIO150__FUNC_CONN_BGF_MCU_AICE_TMSC (MTK_PIN_NO(150) | 6)
+
+#define PINMUX_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
+#define PINMUX_GPIO151__FUNC_CMMCLK2 (MTK_PIN_NO(151) | 1)
+#define PINMUX_GPIO151__FUNC_CLKM2 (MTK_PIN_NO(151) | 2)
+#define PINMUX_GPIO151__FUNC_MD32_0_GPIO2 (MTK_PIN_NO(151) | 3)
+#define PINMUX_GPIO151__FUNC_CONN_BGF_MCU_AICE_TCKC (MTK_PIN_NO(151) | 6)
+
+#define PINMUX_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
+#define PINMUX_GPIO152__FUNC_KPROW1 (MTK_PIN_NO(152) | 1)
+#define PINMUX_GPIO152__FUNC_PWM_2 (MTK_PIN_NO(152) | 2)
+#define PINMUX_GPIO152__FUNC_IDDIG (MTK_PIN_NO(152) | 3)
+#define PINMUX_GPIO152__FUNC_DP_TX_HPD (MTK_PIN_NO(152) | 4)
+#define PINMUX_GPIO152__FUNC_DSI1_TE (MTK_PIN_NO(152) | 5)
+#define PINMUX_GPIO152__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(152) | 6)
+#define PINMUX_GPIO152__FUNC_DBG_MON_B2 (MTK_PIN_NO(152) | 7)
+
+#define PINMUX_GPIO153__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
+#define PINMUX_GPIO153__FUNC_KPROW0 (MTK_PIN_NO(153) | 1)
+#define PINMUX_GPIO153__FUNC_DBG_MON_B1 (MTK_PIN_NO(153) | 7)
+
+#define PINMUX_GPIO154__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
+#define PINMUX_GPIO154__FUNC_KPCOL0 (MTK_PIN_NO(154) | 1)
+#define PINMUX_GPIO154__FUNC_DBG_MON_A32 (MTK_PIN_NO(154) | 7)
+
+#define PINMUX_GPIO155__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
+#define PINMUX_GPIO155__FUNC_KPCOL1 (MTK_PIN_NO(155) | 1)
+#define PINMUX_GPIO155__FUNC_PWM_3 (MTK_PIN_NO(155) | 2)
+#define PINMUX_GPIO155__FUNC_USB_DRVVBUS (MTK_PIN_NO(155) | 3)
+#define PINMUX_GPIO155__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(155) | 4)
+#define PINMUX_GPIO155__FUNC_LCM1_RST (MTK_PIN_NO(155) | 5)
+#define PINMUX_GPIO155__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(155) | 6)
+#define PINMUX_GPIO155__FUNC_DBG_MON_B0 (MTK_PIN_NO(155) | 7)
+
+#define PINMUX_GPIO156__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
+#define PINMUX_GPIO156__FUNC_SPI1_A_CLK (MTK_PIN_NO(156) | 1)
+#define PINMUX_GPIO156__FUNC_SCP_SPI1_A_CK (MTK_PIN_NO(156) | 2)
+#define PINMUX_GPIO156__FUNC_MRG_CLK (MTK_PIN_NO(156) | 3)
+#define PINMUX_GPIO156__FUNC_AGPS_SYNC (MTK_PIN_NO(156) | 4)
+#define PINMUX_GPIO156__FUNC_SCL12 (MTK_PIN_NO(156) | 5)
+#define PINMUX_GPIO156__FUNC_DBG_MON_B3 (MTK_PIN_NO(156) | 7)
+
+#define PINMUX_GPIO157__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
+#define PINMUX_GPIO157__FUNC_SPI1_A_CSB (MTK_PIN_NO(157) | 1)
+#define PINMUX_GPIO157__FUNC_SCP_SPI1_A_CS (MTK_PIN_NO(157) | 2)
+#define PINMUX_GPIO157__FUNC_MRG_SYNC (MTK_PIN_NO(157) | 3)
+#define PINMUX_GPIO157__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(157) | 4)
+#define PINMUX_GPIO157__FUNC_SDA12 (MTK_PIN_NO(157) | 5)
+#define PINMUX_GPIO157__FUNC_DBG_MON_B4 (MTK_PIN_NO(157) | 7)
+
+#define PINMUX_GPIO158__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
+#define PINMUX_GPIO158__FUNC_SPI1_A_MI (MTK_PIN_NO(158) | 1)
+#define PINMUX_GPIO158__FUNC_SCP_SPI1_A_MI (MTK_PIN_NO(158) | 2)
+#define PINMUX_GPIO158__FUNC_MRG_DI (MTK_PIN_NO(158) | 3)
+#define PINMUX_GPIO158__FUNC_PTA_RXD (MTK_PIN_NO(158) | 4)
+#define PINMUX_GPIO158__FUNC_SCL13 (MTK_PIN_NO(158) | 5)
+#define PINMUX_GPIO158__FUNC_DBG_MON_B5 (MTK_PIN_NO(158) | 7)
+
+#define PINMUX_GPIO159__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
+#define PINMUX_GPIO159__FUNC_SPI1_A_MO (MTK_PIN_NO(159) | 1)
+#define PINMUX_GPIO159__FUNC_SCP_SPI1_A_MO (MTK_PIN_NO(159) | 2)
+#define PINMUX_GPIO159__FUNC_MRG_DO (MTK_PIN_NO(159) | 3)
+#define PINMUX_GPIO159__FUNC_PTA_TXD (MTK_PIN_NO(159) | 4)
+#define PINMUX_GPIO159__FUNC_SDA13 (MTK_PIN_NO(159) | 5)
+#define PINMUX_GPIO159__FUNC_DBG_MON_B6 (MTK_PIN_NO(159) | 7)
+
+#define PINMUX_GPIO160__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
+#define PINMUX_GPIO160__FUNC_SCL3 (MTK_PIN_NO(160) | 1)
+#define PINMUX_GPIO160__FUNC_SCP_SCL0 (MTK_PIN_NO(160) | 2)
+#define PINMUX_GPIO160__FUNC_SCP_SCL1 (MTK_PIN_NO(160) | 3)
+
+#define PINMUX_GPIO161__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
+#define PINMUX_GPIO161__FUNC_SDA3 (MTK_PIN_NO(161) | 1)
+#define PINMUX_GPIO161__FUNC_SCP_SDA0 (MTK_PIN_NO(161) | 2)
+#define PINMUX_GPIO161__FUNC_SCP_SDA1 (MTK_PIN_NO(161) | 3)
+
+#define PINMUX_GPIO162__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
+#define PINMUX_GPIO162__FUNC_ANT_SEL0 (MTK_PIN_NO(162) | 1)
+#define PINMUX_GPIO162__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(162) | 2)
+#define PINMUX_GPIO162__FUNC_DBG_MON_B7 (MTK_PIN_NO(162) | 7)
+
+#define PINMUX_GPIO163__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
+#define PINMUX_GPIO163__FUNC_ANT_SEL1 (MTK_PIN_NO(163) | 1)
+#define PINMUX_GPIO163__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(163) | 2)
+#define PINMUX_GPIO163__FUNC_DBG_MON_B8 (MTK_PIN_NO(163) | 7)
+
+#define PINMUX_GPIO164__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
+#define PINMUX_GPIO164__FUNC_ANT_SEL2 (MTK_PIN_NO(164) | 1)
+#define PINMUX_GPIO164__FUNC_SCP_SPI1_B_CK (MTK_PIN_NO(164) | 2)
+#define PINMUX_GPIO164__FUNC_TP_URXD1_AO (MTK_PIN_NO(164) | 3)
+#define PINMUX_GPIO164__FUNC_UCTS0 (MTK_PIN_NO(164) | 5)
+#define PINMUX_GPIO164__FUNC_DBG_MON_B9 (MTK_PIN_NO(164) | 7)
+
+#define PINMUX_GPIO165__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
+#define PINMUX_GPIO165__FUNC_ANT_SEL3 (MTK_PIN_NO(165) | 1)
+#define PINMUX_GPIO165__FUNC_SCP_SPI1_B_CS (MTK_PIN_NO(165) | 2)
+#define PINMUX_GPIO165__FUNC_TP_UTXD1_AO (MTK_PIN_NO(165) | 3)
+#define PINMUX_GPIO165__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(165) | 4)
+#define PINMUX_GPIO165__FUNC_URTS0 (MTK_PIN_NO(165) | 5)
+#define PINMUX_GPIO165__FUNC_DBG_MON_B10 (MTK_PIN_NO(165) | 7)
+
+#define PINMUX_GPIO166__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
+#define PINMUX_GPIO166__FUNC_ANT_SEL4 (MTK_PIN_NO(166) | 1)
+#define PINMUX_GPIO166__FUNC_SCP_SPI1_B_MI (MTK_PIN_NO(166) | 2)
+#define PINMUX_GPIO166__FUNC_TP_URXD2_AO (MTK_PIN_NO(166) | 3)
+#define PINMUX_GPIO166__FUNC_SRCLKENAI1 (MTK_PIN_NO(166) | 4)
+#define PINMUX_GPIO166__FUNC_UCTS1 (MTK_PIN_NO(166) | 5)
+#define PINMUX_GPIO166__FUNC_DBG_MON_B11 (MTK_PIN_NO(166) | 7)
+
+#define PINMUX_GPIO167__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
+#define PINMUX_GPIO167__FUNC_ANT_SEL5 (MTK_PIN_NO(167) | 1)
+#define PINMUX_GPIO167__FUNC_SCP_SPI1_B_MO (MTK_PIN_NO(167) | 2)
+#define PINMUX_GPIO167__FUNC_TP_UTXD2_AO (MTK_PIN_NO(167) | 3)
+#define PINMUX_GPIO167__FUNC_SRCLKENAI0 (MTK_PIN_NO(167) | 4)
+#define PINMUX_GPIO167__FUNC_URTS1 (MTK_PIN_NO(167) | 5)
+#define PINMUX_GPIO167__FUNC_DBG_MON_B12 (MTK_PIN_NO(167) | 7)
+
+#define PINMUX_GPIO168__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
+#define PINMUX_GPIO168__FUNC_ANT_SEL6 (MTK_PIN_NO(168) | 1)
+#define PINMUX_GPIO168__FUNC_SPI0_B_CLK (MTK_PIN_NO(168) | 2)
+#define PINMUX_GPIO168__FUNC_TP_UCTS1_AO (MTK_PIN_NO(168) | 3)
+#define PINMUX_GPIO168__FUNC_KPCOL2 (MTK_PIN_NO(168) | 4)
+#define PINMUX_GPIO168__FUNC_MD_UCTS0 (MTK_PIN_NO(168) | 5)
+#define PINMUX_GPIO168__FUNC_SCL12 (MTK_PIN_NO(168) | 6)
+#define PINMUX_GPIO168__FUNC_DBG_MON_B13 (MTK_PIN_NO(168) | 7)
+
+#define PINMUX_GPIO169__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
+#define PINMUX_GPIO169__FUNC_ANT_SEL7 (MTK_PIN_NO(169) | 1)
+#define PINMUX_GPIO169__FUNC_SPI0_B_CSB (MTK_PIN_NO(169) | 2)
+#define PINMUX_GPIO169__FUNC_TP_URTS1_AO (MTK_PIN_NO(169) | 3)
+#define PINMUX_GPIO169__FUNC_KPROW2 (MTK_PIN_NO(169) | 4)
+#define PINMUX_GPIO169__FUNC_MD_URTS0 (MTK_PIN_NO(169) | 5)
+#define PINMUX_GPIO169__FUNC_SDA12 (MTK_PIN_NO(169) | 6)
+#define PINMUX_GPIO169__FUNC_DBG_MON_B14 (MTK_PIN_NO(169) | 7)
+
+#define PINMUX_GPIO170__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
+#define PINMUX_GPIO170__FUNC_ANT_SEL8 (MTK_PIN_NO(170) | 1)
+#define PINMUX_GPIO170__FUNC_SPI0_B_MI (MTK_PIN_NO(170) | 2)
+#define PINMUX_GPIO170__FUNC_TP_UCTS2_AO (MTK_PIN_NO(170) | 3)
+#define PINMUX_GPIO170__FUNC_SRCLKENAI1 (MTK_PIN_NO(170) | 4)
+#define PINMUX_GPIO170__FUNC_MD_UCTS1 (MTK_PIN_NO(170) | 5)
+#define PINMUX_GPIO170__FUNC_SCL13 (MTK_PIN_NO(170) | 6)
+
+#define PINMUX_GPIO171__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
+#define PINMUX_GPIO171__FUNC_ANT_SEL9 (MTK_PIN_NO(171) | 1)
+#define PINMUX_GPIO171__FUNC_SPI0_B_MO (MTK_PIN_NO(171) | 2)
+#define PINMUX_GPIO171__FUNC_TP_URTS2_AO (MTK_PIN_NO(171) | 3)
+#define PINMUX_GPIO171__FUNC_SRCLKENAI0 (MTK_PIN_NO(171) | 4)
+#define PINMUX_GPIO171__FUNC_MD_URTS1 (MTK_PIN_NO(171) | 5)
+#define PINMUX_GPIO171__FUNC_SDA13 (MTK_PIN_NO(171) | 6)
+
+#define PINMUX_GPIO172__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
+#define PINMUX_GPIO172__FUNC_CONN_TOP_CLK (MTK_PIN_NO(172) | 1)
+#define PINMUX_GPIO172__FUNC_AUXIF_CLK0 (MTK_PIN_NO(172) | 2)
+#define PINMUX_GPIO172__FUNC_DBG_MON_B18 (MTK_PIN_NO(172) | 7)
+
+#define PINMUX_GPIO173__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
+#define PINMUX_GPIO173__FUNC_CONN_TOP_DATA (MTK_PIN_NO(173) | 1)
+#define PINMUX_GPIO173__FUNC_AUXIF_ST0 (MTK_PIN_NO(173) | 2)
+#define PINMUX_GPIO173__FUNC_DBG_MON_B19 (MTK_PIN_NO(173) | 7)
+
+#define PINMUX_GPIO174__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
+#define PINMUX_GPIO174__FUNC_CONN_HRST_B (MTK_PIN_NO(174) | 1)
+#define PINMUX_GPIO174__FUNC_DBG_MON_B17 (MTK_PIN_NO(174) | 7)
+
+#define PINMUX_GPIO175__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
+#define PINMUX_GPIO175__FUNC_CONN_WB_PTA (MTK_PIN_NO(175) | 1)
+#define PINMUX_GPIO175__FUNC_DBG_MON_B20 (MTK_PIN_NO(175) | 7)
+
+#define PINMUX_GPIO176__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
+#define PINMUX_GPIO176__FUNC_CONN_BT_CLK (MTK_PIN_NO(176) | 1)
+#define PINMUX_GPIO176__FUNC_AUXIF_CLK1 (MTK_PIN_NO(176) | 2)
+#define PINMUX_GPIO176__FUNC_DBG_MON_B15 (MTK_PIN_NO(176) | 7)
+
+#define PINMUX_GPIO177__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
+#define PINMUX_GPIO177__FUNC_CONN_BT_DATA (MTK_PIN_NO(177) | 1)
+#define PINMUX_GPIO177__FUNC_AUXIF_ST1 (MTK_PIN_NO(177) | 2)
+#define PINMUX_GPIO177__FUNC_DBG_MON_B16 (MTK_PIN_NO(177) | 7)
+
+#define PINMUX_GPIO178__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
+#define PINMUX_GPIO178__FUNC_CONN_WF_CTRL0 (MTK_PIN_NO(178) | 1)
+#define PINMUX_GPIO178__FUNC_DBG_MON_B21 (MTK_PIN_NO(178) | 7)
+
+#define PINMUX_GPIO179__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
+#define PINMUX_GPIO179__FUNC_CONN_WF_CTRL1 (MTK_PIN_NO(179) | 1)
+#define PINMUX_GPIO179__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(179) | 2)
+#define PINMUX_GPIO179__FUNC_DBG_MON_B22 (MTK_PIN_NO(179) | 7)
+
+#define PINMUX_GPIO180__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
+#define PINMUX_GPIO180__FUNC_CONN_WF_CTRL2 (MTK_PIN_NO(180) | 1)
+#define PINMUX_GPIO180__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(180) | 2)
+#define PINMUX_GPIO180__FUNC_DBG_MON_B23 (MTK_PIN_NO(180) | 7)
+
+#define PINMUX_GPIO181__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
+#define PINMUX_GPIO181__FUNC_CONN_WF_CTRL3 (MTK_PIN_NO(181) | 1)
+#define PINMUX_GPIO181__FUNC_UFS_UNIPRO_SDA (MTK_PIN_NO(181) | 2)
+
+#define PINMUX_GPIO182__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
+#define PINMUX_GPIO182__FUNC_CONN_WF_CTRL4 (MTK_PIN_NO(182) | 1)
+#define PINMUX_GPIO182__FUNC_UFS_UNIPRO_SCL (MTK_PIN_NO(182) | 2)
+
+#define PINMUX_GPIO183__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
+#define PINMUX_GPIO183__FUNC_MSDC0_CMD (MTK_PIN_NO(183) | 1)
+
+#define PINMUX_GPIO184__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
+#define PINMUX_GPIO184__FUNC_MSDC0_DAT0 (MTK_PIN_NO(184) | 1)
+
+#define PINMUX_GPIO185__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
+#define PINMUX_GPIO185__FUNC_MSDC0_DAT2 (MTK_PIN_NO(185) | 1)
+
+#define PINMUX_GPIO186__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
+#define PINMUX_GPIO186__FUNC_MSDC0_DAT4 (MTK_PIN_NO(186) | 1)
+
+#define PINMUX_GPIO187__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
+#define PINMUX_GPIO187__FUNC_MSDC0_DAT6 (MTK_PIN_NO(187) | 1)
+
+#define PINMUX_GPIO188__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
+#define PINMUX_GPIO188__FUNC_MSDC0_DAT1 (MTK_PIN_NO(188) | 1)
+
+#define PINMUX_GPIO189__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
+#define PINMUX_GPIO189__FUNC_MSDC0_DAT5 (MTK_PIN_NO(189) | 1)
+
+#define PINMUX_GPIO190__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
+#define PINMUX_GPIO190__FUNC_MSDC0_DAT7 (MTK_PIN_NO(190) | 1)
+
+#define PINMUX_GPIO191__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
+#define PINMUX_GPIO191__FUNC_MSDC0_DSL (MTK_PIN_NO(191) | 1)
+#define PINMUX_GPIO191__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(191) | 2)
+#define PINMUX_GPIO191__FUNC_IDDIG (MTK_PIN_NO(191) | 3)
+#define PINMUX_GPIO191__FUNC_DMIC_CLK (MTK_PIN_NO(191) | 4)
+#define PINMUX_GPIO191__FUNC_DSI1_TE (MTK_PIN_NO(191) | 5)
+
+#define PINMUX_GPIO192__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
+#define PINMUX_GPIO192__FUNC_MSDC0_CLK (MTK_PIN_NO(192) | 1)
+#define PINMUX_GPIO192__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(192) | 2)
+#define PINMUX_GPIO192__FUNC_USB_DRVVBUS (MTK_PIN_NO(192) | 3)
+#define PINMUX_GPIO192__FUNC_DMIC_DAT (MTK_PIN_NO(192) | 4)
+#define PINMUX_GPIO192__FUNC_LCM1_RST (MTK_PIN_NO(192) | 5)
+
+#define PINMUX_GPIO193__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
+#define PINMUX_GPIO193__FUNC_MSDC0_DAT3 (MTK_PIN_NO(193) | 1)
+
+#define PINMUX_GPIO194__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
+#define PINMUX_GPIO194__FUNC_MSDC0_RSTB (MTK_PIN_NO(194) | 1)
+
+#define PINMUX_GPIO195__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
+#define PINMUX_GPIO195__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(195) | 1)
+#define PINMUX_GPIO195__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(195) | 2)
+
+#define PINMUX_GPIO196__FUNC_GPIO196 (MTK_PIN_NO(196) | 0)
+#define PINMUX_GPIO196__FUNC_AUD_DAT_MOSI2 (MTK_PIN_NO(196) | 1)
+#define PINMUX_GPIO196__FUNC_DBG_MON_B27 (MTK_PIN_NO(196) | 7)
+
+#define PINMUX_GPIO197__FUNC_GPIO197 (MTK_PIN_NO(197) | 0)
+#define PINMUX_GPIO197__FUNC_AUD_NLE_MOSI1 (MTK_PIN_NO(197) | 1)
+#define PINMUX_GPIO197__FUNC_AUD_CLK_MISO (MTK_PIN_NO(197) | 2)
+#define PINMUX_GPIO197__FUNC_I2S2_MCK (MTK_PIN_NO(197) | 3)
+#define PINMUX_GPIO197__FUNC_I2S6_MCK (MTK_PIN_NO(197) | 4)
+#define PINMUX_GPIO197__FUNC_I2S8_MCK (MTK_PIN_NO(197) | 5)
+#define PINMUX_GPIO197__FUNC_UFS_UNIPRO_SDA (MTK_PIN_NO(197) | 6)
+#define PINMUX_GPIO197__FUNC_DBG_MON_B28 (MTK_PIN_NO(197) | 7)
+
+#define PINMUX_GPIO198__FUNC_GPIO198 (MTK_PIN_NO(198) | 0)
+#define PINMUX_GPIO198__FUNC_AUD_NLE_MOSI0 (MTK_PIN_NO(198) | 1)
+#define PINMUX_GPIO198__FUNC_AUD_SYNC_MISO (MTK_PIN_NO(198) | 2)
+#define PINMUX_GPIO198__FUNC_I2S2_BCK (MTK_PIN_NO(198) | 3)
+#define PINMUX_GPIO198__FUNC_I2S6_BCK (MTK_PIN_NO(198) | 4)
+#define PINMUX_GPIO198__FUNC_I2S8_BCK (MTK_PIN_NO(198) | 5)
+#define PINMUX_GPIO198__FUNC_DBG_MON_B29 (MTK_PIN_NO(198) | 7)
+
+#define PINMUX_GPIO199__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define PINMUX_GPIO199__FUNC_AUD_DAT_MISO2 (MTK_PIN_NO(199) | 1)
+#define PINMUX_GPIO199__FUNC_I2S2_DI2 (MTK_PIN_NO(199) | 3)
+#define PINMUX_GPIO199__FUNC_DBG_MON_B32 (MTK_PIN_NO(199) | 7)
+
+#define PINMUX_GPIO200__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define PINMUX_GPIO200__FUNC_SCL6 (MTK_PIN_NO(200) | 1)
+#define PINMUX_GPIO200__FUNC_SCP_SCL0 (MTK_PIN_NO(200) | 2)
+#define PINMUX_GPIO200__FUNC_SCP_SCL1 (MTK_PIN_NO(200) | 3)
+#define PINMUX_GPIO200__FUNC_SCL_6306 (MTK_PIN_NO(200) | 4)
+
+#define PINMUX_GPIO201__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define PINMUX_GPIO201__FUNC_SDA6 (MTK_PIN_NO(201) | 1)
+#define PINMUX_GPIO201__FUNC_SCP_SDA0 (MTK_PIN_NO(201) | 2)
+#define PINMUX_GPIO201__FUNC_SCP_SDA1 (MTK_PIN_NO(201) | 3)
+#define PINMUX_GPIO201__FUNC_SDA_6306 (MTK_PIN_NO(201) | 4)
+
+#define PINMUX_GPIO202__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define PINMUX_GPIO202__FUNC_SCL5 (MTK_PIN_NO(202) | 1)
+
+#define PINMUX_GPIO203__FUNC_GPIO203 (MTK_PIN_NO(203) | 0)
+#define PINMUX_GPIO203__FUNC_SDA5 (MTK_PIN_NO(203) | 1)
+
+#define PINMUX_GPIO204__FUNC_GPIO204 (MTK_PIN_NO(204) | 0)
+#define PINMUX_GPIO204__FUNC_SCL0 (MTK_PIN_NO(204) | 1)
+#define PINMUX_GPIO204__FUNC_SPI4_C_CLK (MTK_PIN_NO(204) | 2)
+#define PINMUX_GPIO204__FUNC_SPI7_B_CLK (MTK_PIN_NO(204) | 3)
+
+#define PINMUX_GPIO205__FUNC_GPIO205 (MTK_PIN_NO(205) | 0)
+#define PINMUX_GPIO205__FUNC_SDA0 (MTK_PIN_NO(205) | 1)
+#define PINMUX_GPIO205__FUNC_SPI4_C_CSB (MTK_PIN_NO(205) | 2)
+#define PINMUX_GPIO205__FUNC_SPI7_B_CSB (MTK_PIN_NO(205) | 3)
+
+#define PINMUX_GPIO206__FUNC_GPIO206 (MTK_PIN_NO(206) | 0)
+#define PINMUX_GPIO206__FUNC_SRCLKENA0 (MTK_PIN_NO(206) | 1)
+
+#define PINMUX_GPIO207__FUNC_GPIO207 (MTK_PIN_NO(207) | 0)
+#define PINMUX_GPIO207__FUNC_SRCLKENA1 (MTK_PIN_NO(207) | 1)
+
+#define PINMUX_GPIO208__FUNC_GPIO208 (MTK_PIN_NO(208) | 0)
+#define PINMUX_GPIO208__FUNC_WATCHDOG (MTK_PIN_NO(208) | 1)
+
+#define PINMUX_GPIO209__FUNC_GPIO209 (MTK_PIN_NO(209) | 0)
+#define PINMUX_GPIO209__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(209) | 1)
+#define PINMUX_GPIO209__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(209) | 2)
+
+#define PINMUX_GPIO210__FUNC_GPIO210 (MTK_PIN_NO(210) | 0)
+#define PINMUX_GPIO210__FUNC_PWRAP_SPI0_CSN (MTK_PIN_NO(210) | 1)
+
+#define PINMUX_GPIO211__FUNC_GPIO211 (MTK_PIN_NO(211) | 0)
+#define PINMUX_GPIO211__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(211) | 1)
+#define PINMUX_GPIO211__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(211) | 2)
+
+#define PINMUX_GPIO212__FUNC_GPIO212 (MTK_PIN_NO(212) | 0)
+#define PINMUX_GPIO212__FUNC_PWRAP_SPI0_CK (MTK_PIN_NO(212) | 1)
+
+#define PINMUX_GPIO213__FUNC_GPIO213 (MTK_PIN_NO(213) | 0)
+#define PINMUX_GPIO213__FUNC_RTC32K_CK (MTK_PIN_NO(213) | 1)
+
+#define PINMUX_GPIO214__FUNC_GPIO214 (MTK_PIN_NO(214) | 0)
+#define PINMUX_GPIO214__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(214) | 1)
+#define PINMUX_GPIO214__FUNC_I2S1_MCK (MTK_PIN_NO(214) | 3)
+#define PINMUX_GPIO214__FUNC_I2S7_MCK (MTK_PIN_NO(214) | 4)
+#define PINMUX_GPIO214__FUNC_I2S9_MCK (MTK_PIN_NO(214) | 5)
+#define PINMUX_GPIO214__FUNC_UFS_UNIPRO_SCL (MTK_PIN_NO(214) | 6)
+
+#define PINMUX_GPIO215__FUNC_GPIO215 (MTK_PIN_NO(215) | 0)
+#define PINMUX_GPIO215__FUNC_AUD_SYNC_MOSI (MTK_PIN_NO(215) | 1)
+#define PINMUX_GPIO215__FUNC_I2S1_BCK (MTK_PIN_NO(215) | 3)
+#define PINMUX_GPIO215__FUNC_I2S7_BCK (MTK_PIN_NO(215) | 4)
+#define PINMUX_GPIO215__FUNC_I2S9_BCK (MTK_PIN_NO(215) | 5)
+#define PINMUX_GPIO215__FUNC_DBG_MON_B24 (MTK_PIN_NO(215) | 7)
+
+#define PINMUX_GPIO216__FUNC_GPIO216 (MTK_PIN_NO(216) | 0)
+#define PINMUX_GPIO216__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(216) | 1)
+#define PINMUX_GPIO216__FUNC_I2S1_LRCK (MTK_PIN_NO(216) | 3)
+#define PINMUX_GPIO216__FUNC_I2S7_LRCK (MTK_PIN_NO(216) | 4)
+#define PINMUX_GPIO216__FUNC_I2S9_LRCK (MTK_PIN_NO(216) | 5)
+#define PINMUX_GPIO216__FUNC_DBG_MON_B25 (MTK_PIN_NO(216) | 7)
+
+#define PINMUX_GPIO217__FUNC_GPIO217 (MTK_PIN_NO(217) | 0)
+#define PINMUX_GPIO217__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(217) | 1)
+#define PINMUX_GPIO217__FUNC_I2S1_DO (MTK_PIN_NO(217) | 3)
+#define PINMUX_GPIO217__FUNC_I2S7_DO (MTK_PIN_NO(217) | 4)
+#define PINMUX_GPIO217__FUNC_I2S9_DO (MTK_PIN_NO(217) | 5)
+#define PINMUX_GPIO217__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(217) | 6)
+#define PINMUX_GPIO217__FUNC_DBG_MON_B26 (MTK_PIN_NO(217) | 7)
+
+#define PINMUX_GPIO218__FUNC_GPIO218 (MTK_PIN_NO(218) | 0)
+#define PINMUX_GPIO218__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(218) | 1)
+#define PINMUX_GPIO218__FUNC_VOW_DAT_MISO (MTK_PIN_NO(218) | 2)
+#define PINMUX_GPIO218__FUNC_I2S2_LRCK (MTK_PIN_NO(218) | 3)
+#define PINMUX_GPIO218__FUNC_I2S6_LRCK (MTK_PIN_NO(218) | 4)
+#define PINMUX_GPIO218__FUNC_I2S8_LRCK (MTK_PIN_NO(218) | 5)
+#define PINMUX_GPIO218__FUNC_DBG_MON_B30 (MTK_PIN_NO(218) | 7)
+
+#define PINMUX_GPIO219__FUNC_GPIO219 (MTK_PIN_NO(219) | 0)
+#define PINMUX_GPIO219__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(219) | 1)
+#define PINMUX_GPIO219__FUNC_VOW_CLK_MISO (MTK_PIN_NO(219) | 2)
+#define PINMUX_GPIO219__FUNC_I2S2_DI (MTK_PIN_NO(219) | 3)
+#define PINMUX_GPIO219__FUNC_I2S6_DI (MTK_PIN_NO(219) | 4)
+#define PINMUX_GPIO219__FUNC_I2S8_DI (MTK_PIN_NO(219) | 5)
+#define PINMUX_GPIO219__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(219) | 6)
+#define PINMUX_GPIO219__FUNC_DBG_MON_B31 (MTK_PIN_NO(219) | 7)
+
+#endif /* __MT6893-PINFUNC_H */
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index d3f9eab2b784..9f100b18a676 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -15,6 +15,7 @@
 
 / {
 	model = "Bananapi BPI-R64";
+	chassis-type = "embedded";
 	compatible = "bananapi,bpi-r64", "mediatek,mt7622";
 
 	aliases {
@@ -72,8 +73,9 @@
 		};
 	};
 
-	memory {
+	memory@40000000 {
 		reg = <0 0x40000000 0 0x40000000>;
+		device_type = "memory";
 	};
 
 	reg_1p8v: regulator-1p8v {
@@ -147,9 +149,12 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch@0 {
+		switch@1f {
 			compatible = "mediatek,mt7531";
-			reg = <0>;
+			reg = <0x1f>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupts-extended = <&pio 53 IRQ_TYPE_LEVEL_HIGH>;
 			reset-gpios = <&pio 54 0>;
 
 			ports {
@@ -181,6 +186,18 @@
 					label = "lan3";
 				};
 
+				port@5 {
+					reg = <5>;
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
 				port@6 {
 					reg = <6>;
 					label = "cpu";
@@ -235,7 +252,6 @@
 	bus-width = <4>;
 	max-frequency = <50000000>;
 	cap-sd-highspeed;
-	r_smpl = <1>;
 	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	vqmmc-supply = <&reg_3p3v>;
@@ -249,14 +265,42 @@
 	status = "disabled";
 };
 
-&nor_flash {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi_nor_pins>;
-	status = "disabled";
+&bch {
+	status = "okay";
+};
 
+&snfi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&serial_nand_pins>;
+	status = "okay";
 	flash@0 {
-		compatible = "jedec,spi-nor";
+		compatible = "spi-nand";
 		reg = <0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		nand-ecc-engine = <&snfi>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bl2";
+				reg = <0x0 0x80000>;
+				read-only;
+			};
+
+			partition@80000 {
+				label = "fip";
+				reg = <0x80000 0x200000>;
+				read-only;
+			};
+
+			ubi: partition@280000 {
+				label = "ubi";
+				reg = <0x280000 0x7d80000>;
+			};
+		};
 	};
 };
 
@@ -276,7 +320,7 @@
 	/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
 	 * SATA functions. i.e. output-high: PCIe, output-low: SATA
 	 */
-	asm_sel {
+	asm-sel-hog {
 		gpio-hog;
 		gpios = <90 GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -285,8 +329,8 @@
 	/* eMMC is shared pin with parallel NAND */
 	emmc_pins_default: emmc-pins-default {
 		mux {
-			function = "emmc", "emmc_rst";
-			groups = "emmc";
+			function = "emmc";
+			groups = "emmc", "emmc_rst";
 		};
 
 		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
@@ -353,9 +397,9 @@
 	i2s1_pins: i2s1-pins {
 		mux {
 			function = "i2s";
-			groups =  "i2s_out_mclk_bclk_ws",
-				  "i2s1_in_data",
-				  "i2s1_out_data";
+			groups = "i2s_out_mclk_bclk_ws",
+				 "i2s1_in_data",
+				 "i2s1_out_data";
 		};
 
 		conf {
@@ -553,11 +597,11 @@
 };
 
 &sata {
-	status = "disable";
+	status = "disabled";
 };
 
 &sata_phy {
-	status = "disable";
+	status = "disabled";
 };
 
 &spi0 {
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 36722cabe626..8c3e2e2578bc 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -15,6 +15,7 @@
 
 / {
 	model = "MediaTek MT7622 RFB1 board";
+	chassis-type = "embedded";
 	compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
 
 	aliases {
@@ -54,8 +55,9 @@
 		};
 	};
 
-	memory {
+	memory@40000000 {
 		reg = <0 0x40000000 0 0x20000000>;
+		device_type = "memory";
 	};
 
 	reg_1p8v: regulator-1p8v {
@@ -116,6 +118,18 @@
 		};
 	};
 
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "rgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
 	mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -154,6 +168,18 @@
 					label = "wan";
 				};
 
+				port@5 {
+					reg = <5>;
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
 				port@6 {
 					reg = <6>;
 					label = "cpu";
@@ -208,7 +234,6 @@
 	bus-width = <4>;
 	max-frequency = <50000000>;
 	cap-sd-highspeed;
-	r_smpl = <1>;
 	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	vqmmc-supply = <&reg_3p3v>;
@@ -243,8 +268,8 @@
 	/* eMMC is shared pin with parallel NAND */
 	emmc_pins_default: emmc-pins-default {
 		mux {
-			function = "emmc", "emmc_rst";
-			groups = "emmc";
+			function = "emmc";
+			groups = "emmc", "emmc_rst";
 		};
 
 		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
@@ -311,9 +336,9 @@
 	i2s1_pins: i2s1-pins {
 		mux {
 			function = "i2s";
-			groups =  "i2s_out_mclk_bclk_ws",
-				  "i2s1_in_data",
-				  "i2s1_out_data";
+			groups = "i2s_out_mclk_bclk_ws",
+				 "i2s1_in_data",
+				 "i2s1_out_data";
 		};
 
 		conf {
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 146e18b5b1f4..917fa39a74f8 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -101,6 +101,7 @@
 		L2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -251,7 +252,7 @@
 		clock-names = "hif_sel";
 	};
 
-	cir: cir@10009000 {
+	cir: ir-receiver@10009000 {
 		compatible = "mediatek,mt7622-cir";
 		reg = <0 0x10009000 0 0x1000>;
 		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>;
@@ -282,16 +283,14 @@
 		};
 	};
 
-	apmixedsys: apmixedsys@10209000 {
-		compatible = "mediatek,mt7622-apmixedsys",
-			     "syscon";
+	apmixedsys: clock-controller@10209000 {
+		compatible = "mediatek,mt7622-apmixedsys";
 		reg = <0 0x10209000 0 0x1000>;
 		#clock-cells = <1>;
 	};
 
-	topckgen: topckgen@10210000 {
-		compatible = "mediatek,mt7622-topckgen",
-			     "syscon";
+	topckgen: clock-controller@10210000 {
+		compatible = "mediatek,mt7622-topckgen";
 		reg = <0 0x10210000 0 0x1000>;
 		#clock-cells = <1>;
 	};
@@ -435,6 +434,7 @@
 	pwm: pwm@11006000 {
 		compatible = "mediatek,mt7622-pwm";
 		reg = <0 0x11006000 0 0x1000>;
+		#pwm-cells = <2>;
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&topckgen CLK_TOP_PWM_SEL>,
 			 <&pericfg CLK_PERI_PWM_PD>,
@@ -513,7 +513,6 @@
 			 <&pericfg CLK_PERI_AUXADC_PD>;
 		clock-names = "therm", "auxadc";
 		resets = <&pericfg MT7622_PERI_THERM_SW_RST>;
-		reset-names = "therm";
 		mediatek,auxadc = <&auxadc>;
 		mediatek,apmixedsys = <&apmixedsys>;
 		nvmem-cells = <&thermal_calibration>;
@@ -526,7 +525,6 @@
 		reg = <0 0x1100c000 0 0x1000>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&pericfg CLK_PERI_BTIF_PD>;
-		clock-names = "main";
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		status = "disabled";
@@ -539,7 +537,7 @@
 		};
 	};
 
-	nandc: nfi@1100d000 {
+	nandc: nand-controller@1100d000 {
 		compatible = "mediatek,mt7622-nfc";
 		reg = <0 0x1100D000 0 0x1000>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
@@ -733,9 +731,8 @@
 		power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
 	};
 
-	ssusbsys: ssusbsys@1a000000 {
-		compatible = "mediatek,mt7622-ssusbsys",
-			     "syscon";
+	ssusbsys: clock-controller@1a000000 {
+		compatible = "mediatek,mt7622-ssusbsys";
 		reg = <0 0x1a000000 0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -792,9 +789,8 @@
 		};
 	};
 
-	pciesys: pciesys@1a100800 {
-		compatible = "mediatek,mt7622-pciesys",
-			     "syscon";
+	pciesys: clock-controller@1a100800 {
+		compatible = "mediatek,mt7622-pciesys";
 		reg = <0 0x1a100800 0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -904,7 +900,7 @@
 		status = "disabled";
 	};
 
-	sata_phy: t-phy@1a243000 {
+	sata_phy: t-phy {
 		compatible = "mediatek,mt7622-tphy",
 			     "mediatek,generic-tphy-v1";
 		#address-cells = <2>;
@@ -920,12 +916,13 @@
 		};
 	};
 
-	hifsys: syscon@1af00000 {
-		compatible = "mediatek,mt7622-hifsys", "syscon";
+	hifsys: clock-controller@1af00000 {
+		compatible = "mediatek,mt7622-hifsys";
 		reg = <0 0x1af00000 0 0x70>;
+		#clock-cells = <1>;
 	};
 
-	ethsys: syscon@1b000000 {
+	ethsys: clock-controller@1b000000 {
 		compatible = "mediatek,mt7622-ethsys",
 			     "syscon";
 		reg = <0 0x1b000000 0 0x1000>;
@@ -965,9 +962,7 @@
 	};
 
 	eth: ethernet@1b100000 {
-		compatible = "mediatek,mt7622-eth",
-			     "mediatek,mt2701-eth",
-			     "syscon";
+		compatible = "mediatek,mt7622-eth";
 		reg = <0 0x1b100000 0 0x20000>;
 		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts b/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts
new file mode 100644
index 000000000000..54101cc08a25
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7981b.dtsi"
+
+/ {
+	compatible = "cudy,wr3000-v1", "mediatek,mt7981b";
+	model = "Cudy WR3000 V1";
+
+	memory@40000000 {
+		reg = <0 0x40000000 0 0x10000000>;
+		device_type = "memory";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-wps {
+			label = "WPS";
+			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		key-reset {
+			label = "RESET";
+			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WLAN_2GHZ;
+			gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WLAN_5GHZ;
+			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WAN_ONLINE;
+			gpios = <&pio 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts b/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts
new file mode 100644
index 000000000000..4f6cbb491287
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include "mt7981b.dtsi"
+
+/ {
+	compatible = "openwrt,one", "mediatek,mt7981b";
+	model = "OpenWrt One";
+
+	memory@40000000 {
+		reg = <0 0x40000000 0 0x40000000>;
+		device_type = "memory";
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-xiaomi-ax3000t.dts b/arch/arm64/boot/dts/mediatek/mt7981b-xiaomi-ax3000t.dts
new file mode 100644
index 000000000000..a314c3e05e50
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7981b-xiaomi-ax3000t.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include "mt7981b.dtsi"
+
+/ {
+	compatible = "xiaomi,ax3000t", "mediatek,mt7981b";
+	model = "Xiaomi AX3000T";
+
+	memory@40000000 {
+		reg = <0 0x40000000 0 0x10000000>;
+		device_type = "memory";
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
new file mode 100644
index 000000000000..277c11247c13
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+#include <dt-bindings/clock/mediatek,mt7981-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/mt7986-resets.h>
+
+/ {
+	compatible = "mediatek,mt7981b";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+	};
+
+	oscillator-40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+		#clock-cells = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
+			      <0 0x0c080000 0 0x200000>; /* GICR */
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		infracfg: clock-controller@10001000 {
+			compatible = "mediatek,mt7981-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: clock-controller@1001b000 {
+			compatible = "mediatek,mt7981-topckgen", "syscon";
+			reg = <0 0x1001b000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: clock-controller@1001e000 {
+			compatible = "mediatek,mt7981-apmixedsys";
+			reg = <0 0x1001e000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pwm@10048000 {
+			compatible = "mediatek,mt7981-pwm";
+			reg = <0 0x10048000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_PWM_STA>,
+				 <&infracfg CLK_INFRA_PWM_HCK>,
+				 <&infracfg CLK_INFRA_PWM1_CK>,
+				 <&infracfg CLK_INFRA_PWM2_CK>,
+				 <&infracfg CLK_INFRA_PWM3_CK>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
+			#pwm-cells = <2>;
+		};
+
+		serial@11002000 {
+			compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x100>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart", "wakeup";
+			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
+				 <&infracfg CLK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		serial@11003000 {
+			compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x100>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart", "wakeup";
+			clocks = <&infracfg CLK_INFRA_UART1_SEL>,
+				 <&infracfg CLK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		serial@11004000 {
+			compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x100>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart", "wakeup";
+			clocks = <&infracfg CLK_INFRA_UART2_SEL>,
+				 <&infracfg CLK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		i2c@11007000 {
+			compatible = "mediatek,mt7981-i2c";
+			reg = <0 0x11007000 0 0x1000>,
+			      <0 0x10217080 0 0x80>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_I2C0_CK>,
+				 <&infracfg CLK_INFRA_AP_DMA_CK>,
+				 <&infracfg CLK_INFRA_I2C_MCK_CK>,
+				 <&infracfg CLK_INFRA_I2C_PCK_CK>;
+			clock-names = "main", "dma", "arb", "pmic";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi@11009000 {
+			compatible = "mediatek,mt7981-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x11009000 0 0x1000>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_CB_M_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI2_CK>,
+				 <&infracfg CLK_INFRA_SPI2_HCK_CK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi@1100a000 {
+			compatible = "mediatek,mt7981-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_CB_M_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI0_CK>,
+				 <&infracfg CLK_INFRA_SPI0_HCK_CK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi@1100b000 {
+			compatible = "mediatek,mt7981-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_CB_M_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI1_CK>,
+				 <&infracfg CLK_INFRA_SPI1_HCK_CK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		thermal@1100c800 {
+			compatible = "mediatek,mt7981-thermal",
+				     "mediatek,mt7986-thermal";
+			reg = <0 0x1100c800 0 0x800>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_THERM_CK>,
+				 <&infracfg CLK_INFRA_ADC_26M_CK>;
+			clock-names = "therm", "auxadc";
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+			#thermal-sensor-cells = <1>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+		};
+
+		auxadc: adc@1100d000 {
+			compatible = "mediatek,mt7981-auxadc",
+				     "mediatek,mt7986-auxadc";
+			reg = <0 0x1100d000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_ADC_26M_CK>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		pio: pinctrl@11d00000 {
+			compatible = "mediatek,mt7981-pinctrl";
+			reg = <0 0x11d00000 0 0x1000>,
+			      <0 0x11c00000 0 0x1000>,
+			      <0 0x11c10000 0 0x1000>,
+			      <0 0x11d20000 0 0x1000>,
+			      <0 0x11e00000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x11f10000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio", "iocfg_rt", "iocfg_rm", "iocfg_rb", "iocfg_lb",
+				    "iocfg_bl", "iocfg_tm", "iocfg_tl", "eint";
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			gpio-ranges = <&pio 0 0 56>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		efuse@11f20000 {
+			compatible = "mediatek,mt7981-efuse", "mediatek,efuse";
+			reg = <0 0x11f20000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			thermal_calibration: thermal-calib@274 {
+				reg = <0x274 0xc>;
+			};
+		};
+
+		clock-controller@15000000 {
+			compatible = "mediatek,mt7981-ethsys", "syscon";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		wifi@18000000 {
+			compatible = "mediatek,mt7981-wmac";
+			reg = <0 0x18000000 0 0x1000000>,
+			      <0 0x10003000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_NETSYS_MCU_SEL>,
+				 <&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
+			clock-names = "mcu", "ap2conn";
+			resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
+			reset-names = "consys";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
new file mode 100644
index 000000000000..30805a610262
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+	compatible = "acelink,ew-7886cax", "mediatek,mt7986a";
+	model = "Acelink EW-7886CAX";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		reg = <0 0x40000000 0 0x20000000>;
+		device_type = "memory";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-restart {
+			label = "Reset";
+			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "2500base-x";
+		phy-handle = <&phy6>;
+		nvmem-cells = <&macaddr>;
+		nvmem-cell-names = "mac-address";
+	};
+
+	mdio-bus {
+		reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <50000>;
+		reset-post-delay-us = <20000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy6: phy@6 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			reg = <6>;
+		};
+	};
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x100000>;
+				label = "bootloader";
+				read-only;
+			};
+
+			partition@100000 {
+				reg = <0x100000 0x80000>;
+				label = "u-boot-env";
+			};
+
+			partition@180000 {
+				compatible = "nvmem-cells";
+				reg = <0x180000 0x200000>;
+				label = "factory";
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom: eeprom@0 {
+						reg = <0x0 0x1000>;
+					};
+
+					macaddr: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@380000 {
+				reg = <0x380000 0x200000>;
+				label = "fip";
+			};
+
+			partition@580000 {
+				reg = <0x580000 0x4000000>;
+				label = "ubi";
+			};
+		};
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	nvmem-cells = <&eeprom>;
+	nvmem-cell-names = "eeprom";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso
new file mode 100644
index 000000000000..047a8388811e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+};
+
+&{/soc/mmc@11230000} {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	hs400-ds-delay = <0x14014>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts
new file mode 100644
index 000000000000..e2a2fea7adf0
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts
@@ -0,0 +1,493 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Authors: Frank Wunderlich <frank-w@public-files.de>
+ *          Eric Woudstra <ericwouds@gmail.com>
+ *          Tianling Shen <cnsztl@immortalwrt.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+	model = "Bananapi BPI-R3 Mini";
+	chassis-type = "embedded";
+	compatible = "bananapi,bpi-r3mini", "mediatek,mt7986a";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dcin: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12vd";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		/*
+		 * The signal is inverted on this board and the PWM driver
+		 * does not support polarity inversion.
+		 */
+		/* cooling level (0, 1, 2) */
+		cooling-levels = <255 96 0>;
+		pwms = <&pwm 0 10000>;
+	};
+
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1.8vd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&dcin>;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3vd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&dcin>;
+	};
+
+	usb_vbus: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpios = <&pio 20 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+	};
+
+	en8811_a: regulator-phy1 {
+		compatible = "regulator-fixed";
+		regulator-name = "phy1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 16 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	en8811_b: regulator-phy2 {
+		compatible = "regulator-fixed";
+		regulator-name = "phy2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 17 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset-key {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* active: set fan to cooling level 2 */
+			cooling-device = <&fan 2 2>;
+			trip = <&cpu_trip_active_high>;
+		};
+
+		map1 {
+			/* active: set fan to cooling level 1 */
+			cooling-device = <&fan 1 1>;
+			trip = <&cpu_trip_active_med>;
+		};
+
+		map2 {
+			/* active: set fan to cooling level 0 */
+			cooling-device = <&fan 0 0>;
+			trip = <&cpu_trip_active_low>;
+		};
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+		phy-handle = <&phy0>;
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "2500base-x";
+		phy-handle = <&phy1>;
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+};
+
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins>;
+	status = "okay";
+
+	/* MAC Address EEPROM */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+
+		address-width = <8>;
+		pagesize = <8>;
+		size = <256>;
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@14 {
+		reg = <14>;
+		interrupts-extended = <&pio 48 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pio 49 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <20000>;
+		phy-mode = "2500base-x";
+		full-duplex;
+		pause;
+		airoha,pnswap-rx;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 { /* en8811_a_gpio5 */
+				reg = <0>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				function-enumerator = <1>;
+				default-state = "keep";
+			};
+			led@1 { /* en8811_a_gpio4 */
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				function-enumerator = <2>;
+				default-state = "keep";
+			};
+		};
+	};
+
+	phy1: ethernet-phy@15 {
+		reg = <15>;
+		interrupts-extended = <&pio 46 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pio 47 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <20000>;
+		phy-mode = "2500base-x";
+		full-duplex;
+		pause;
+		airoha,pnswap-rx;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 { /* en8811_b_gpio5 */
+				reg = <0>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_WAN;
+				function-enumerator = <1>;
+				default-state = "keep";
+			};
+			led@1 { /* en8811_b_gpio4 */
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WAN;
+				function-enumerator = <2>;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pio {
+	i2c_pins: i2c-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c";
+		};
+	};
+
+	mmc0_pins_default: mmc0-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+	};
+
+	pcie_pins: pcie-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie_clk", "pcie_wake", "pcie_pereset";
+		};
+	};
+
+	pwm_pins: pwm-pins {
+		mux {
+			function = "pwm";
+			groups = "pwm0";
+		};
+	};
+
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	usb_ngff_pins: usb-ngff-pins {
+		ngff-gnss-off-conf {
+			pins = "GPIO_6";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <1>;
+		};
+		ngff-pe-rst-conf {
+			pins = "GPIO_7";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <1>;
+		};
+		ngff-wwan-off-conf {
+			pins = "GPIO_8";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <1>;
+		};
+		ngff-pwr-off-conf {
+			pins = "GPIO_9";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <1>;
+		};
+		ngff-rst-conf {
+			pins = "GPIO_10";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <1>;
+		};
+		ngff-coex-conf {
+			pins = "SPI1_CS";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <1>;
+		};
+	};
+
+	wf_2g_5g_pins: wf-2g-5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_2g", "wf_5g";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_dbdc_pins: wf-dbdc-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_dbdc";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_led_pins: wf-led-pins {
+		mux {
+			function = "led";
+			groups = "wifi_led";
+		};
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+
+		spi-max-frequency = <20000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&ssusb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_ngff_pins>;
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&usb_vbus>;
+	status = "okay";
+};
+
+&trng {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	pinctrl-names = "default", "dbdc";
+	pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>;
+	pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>;
+
+	led {
+		led-active-low;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
new file mode 100644
index 000000000000..24398f8a7da4
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Authors: Daniel Golle <daniel@makrotopia.org>
+ *          Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+};
+
+&{/soc/spi@1100a000} {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	spi_nand: flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-tx-buswidth = <4>;
+		spi-rx-buswidth = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bl2";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "reserved";
+				reg = <0x100000 0x280000>;
+			};
+
+			partition@380000 {
+				label = "fip";
+				reg = <0x380000 0x200000>;
+				read-only;
+			};
+
+			partition@580000 {
+				label = "ubi";
+				reg = <0x580000 0x7a80000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
new file mode 100644
index 000000000000..6a0d529b54ac
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Authors: Daniel Golle <daniel@makrotopia.org>
+ *          Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+};
+
+&{/soc/spi@1100a000} {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bl2";
+				reg = <0x0 0x40000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "u-boot-env";
+				reg = <0x40000 0x40000>;
+			};
+
+			partition@80000 {
+				label = "reserved2";
+				reg = <0x80000 0x80000>;
+			};
+
+			partition@100000 {
+				label = "fip";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "recovery";
+				reg = <0x180000 0xa80000>;
+			};
+
+			partition@c00000 {
+				label = "fit";
+				reg = <0xc00000 0x1400000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sata.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sata.dtso
new file mode 100644
index 000000000000..f7dd52981977
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sata.dtso
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	reg_sata12v: regulator-sata12v {
+		compatible = "regulator-fixed";
+		regulator-name = "sata12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&pio 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_sata5v: regulator-sata5v {
+		compatible = "regulator-fixed";
+		regulator-name = "sata5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata12v>;
+	};
+
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso
new file mode 100644
index 000000000000..d9e01967acc4
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+};
+
+&{/soc/mmc@11230000} {
+	bus-width = <4>;
+	max-frequency = <52000000>;
+	cap-sd-highspeed;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
new file mode 100644
index 000000000000..e7654dc9a1c9
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -0,0 +1,497 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Authors: Sam.Shih <sam.shih@mediatek.com>
+ *          Frank Wunderlich <frank-w@public-files.de>
+ *          Daniel Golle <daniel@makrotopia.org>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+	model = "Bananapi BPI-R3";
+	chassis-type = "embedded";
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dcin: regulator-12vd {
+		compatible = "regulator-fixed";
+		regulator-name = "12vd";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		/* cooling level (0, 1, 2) - pwm inverted */
+		cooling-levels = <255 96 0>;
+		pwms = <&pwm 0 10000>;
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset-key {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wps-key {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/* i2c of the left SFP cage (wan) */
+	i2c_sfp1: i2c-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&pio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+	};
+
+	/* i2c of the right SFP cage (lan) */
+	i2c_sfp2: i2c-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&pio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&pio 69 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		blue_led: led-1 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 86 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1.8vd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&dcin>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3vd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&dcin>;
+	};
+
+	/* left SFP cage (wan) */
+	sfp1: sfp-1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		los-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+		mod-def0-gpios = <&pio 49 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* right SFP cage (lan) */
+	sfp2: sfp-2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		los-gpios = <&pio 31 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pio 47 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <3000>;
+		tx-disable-gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map-cpu-active-high {
+			/* active: set fan to cooling level 2 */
+			cooling-device = <&fan 2 2>;
+			trip = <&cpu_trip_active_high>;
+		};
+
+		map-cpu-active-med {
+			/* active: set fan to cooling level 1 */
+			cooling-device = <&fan 1 1>;
+			trip = <&cpu_trip_active_med>;
+		};
+
+		map-cpu-active-low {
+			/* active: set fan to cooling level 0 */
+			cooling-device = <&fan 0 0>;
+			trip = <&cpu_trip_active_low>;
+		};
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "2500base-x";
+		sfp = <&sfp1>;
+		managed = "in-band-status";
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&mdio {
+	switch: switch@31 {
+		compatible = "mediatek,mt7531";
+		reg = <31>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <1>;
+		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pio {
+	i2c_pins: i2c-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c";
+		};
+	};
+
+	mmc0_pins_default: mmc0-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+	};
+
+	pcie_pins: pcie-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie_clk", "pcie_pereset";
+		};
+	};
+
+	pwm_pins: pwm-pins {
+		mux {
+			function = "pwm";
+			groups = "pwm0", "pwm1_0";
+		};
+	};
+
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	spic_pins: spic-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_0";
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		mux {
+			function = "uart";
+			groups = "uart1_rx_tx";
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2_0_rx_tx";
+		};
+	};
+
+	wf_2g_5g_pins: wf-2g-5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_2g", "wf_5g";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_dbdc_pins: wf-dbdc-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_dbdc";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_led_pins: wf-led-pins {
+		mux {
+			function = "led";
+			groups = "wifi_led";
+		};
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	status = "okay";
+};
+
+&ssusb {
+	status = "okay";
+};
+
+&switch {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "wan";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan0";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan1";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan2";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "lan3";
+		};
+
+		port5: port@5 {
+			reg = <5>;
+			label = "lan4";
+			phy-mode = "2500base-x";
+			sfp = <&sfp2>;
+			managed = "in-band-status";
+		};
+
+		port@6 {
+			reg = <6>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+			phy-mode = "2500base-x";
+
+			fixed-link {
+				speed = <2500>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	pinctrl-names = "default", "dbdc";
+	pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>;
+	pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>;
+
+	led {
+		led-active-low;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 882277a52b69..5d8e3d3f6c20 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -5,11 +5,14 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/pinctrl/mt65xx.h>
+
 #include "mt7986a.dtsi"
 
 / {
 	model = "MediaTek MT7986a RFB";
-	compatible = "mediatek,mt7986a-rfb";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt7986a-rfb", "mediatek,mt7986a";
 
 	aliases {
 		serial0 = &uart0;
@@ -23,6 +26,28 @@
 		device_type = "memory";
 		reg = <0 0x40000000 0 0x40000000>;
 	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&crypto {
+	status = "okay";
 };
 
 &eth {
@@ -40,6 +65,18 @@
 		};
 	};
 
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "rgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
 	mdio: mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -54,6 +91,185 @@
 	};
 };
 
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	hs400-ds-delay = <0x14014>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+	no-sd;
+	no-sdio;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pio {
+	mmc0_pins_default: mmc0-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+	};
+
+	pcie_pins: pcie-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie_clk", "pcie_wake", "pcie_pereset";
+		};
+	};
+
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	spic_pins: spic-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_2";
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		mux {
+			function = "uart";
+			groups = "uart1";
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2";
+		};
+	};
+
+	wf_2g_5g_pins: wf-2g-5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_2g", "wf_5g";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_dbdc_pins: wf-dbdc-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_dbdc";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+
+	spi_nand: flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+};
+
+&ssusb {
+	status = "okay";
+};
+
 &switch {
 	ports {
 		#address-cells = <1>;
@@ -84,6 +300,18 @@
 			label = "lan4";
 		};
 
+		port@5 {
+			reg = <5>;
+			ethernet = <&gmac1>;
+			phy-mode = "rgmii";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+				pause;
+			};
+		};
+
 		port@6 {
 			reg = <6>;
 			label = "cpu";
@@ -115,18 +343,13 @@
 	status = "okay";
 };
 
-&pio {
-	uart1_pins: uart1-pins {
-		mux {
-			function = "uart";
-			groups = "uart1";
-		};
-	};
+&usb_phy {
+	status = "okay";
+};
 
-	uart2_pins: uart2-pins {
-		mux {
-			function = "uart";
-			groups = "uart2";
-		};
-	};
+&wifi {
+	status = "okay";
+	pinctrl-names = "default", "dbdc";
+	pinctrl-0 = <&wf_2g_5g_pins>;
+	pinctrl-1 = <&wf_dbdc_pins>;
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index e3a407d03551..a8972330a7b8 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -7,55 +7,58 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/mt7986-clk.h>
+#include <dt-bindings/reset/mt7986-resets.h>
+#include <dt-bindings/phy/phy.h>
 
 / {
+	compatible = "mediatek,mt7986a";
 	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	clk40m: oscillator@0 {
-		compatible = "fixed-clock";
-		clock-frequency = <40000000>;
-		#clock-cells = <0>;
-		clock-output-names = "clkxtal";
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		cpu0: cpu@0 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x2>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
-			device_type = "cpu";
-			enable-method = "psci";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 	};
 
+	clk40m: oscillator-40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		#clock-cells = <0>;
+		clock-output-names = "clkxtal";
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -70,40 +73,84 @@
 			reg = <0 0x43000000 0 0x30000>;
 			no-map;
 		};
-	};
 
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+		wmcpu_emi: wmcpu-reserved@4fc00000 {
+			no-map;
+			reg = <0 0x4fc00000 0 0x00100000>;
+		};
+
+		wo_emi0: wo-emi@4fd00000 {
+			reg = <0 0x4fd00000 0 0x40000>;
+			no-map;
+		};
+
+		wo_emi1: wo-emi@4fd40000 {
+			reg = <0 0x4fd40000 0 0x40000>;
+			no-map;
+		};
+
+		wo_ilm0: wo-ilm@151e0000 {
+			reg = <0 0x151e0000 0 0x8000>;
+			no-map;
+		};
+
+		wo_ilm1: wo-ilm@151f0000 {
+			reg = <0 0x151f0000 0 0x8000>;
+			no-map;
+		};
+
+		wo_data: wo-data@4fd80000 {
+			reg = <0 0x4fd80000 0 0x240000>;
+			no-map;
+		};
+
+		wo_dlm0: wo-dlm@151e8000 {
+			reg = <0 0x151e8000 0 0x2000>;
+			no-map;
+		};
+
+		wo_dlm1: wo-dlm@151f8000 {
+			reg = <0 0x151f8000 0 0x2000>;
+			no-map;
+		};
+
+		wo_boot: wo-boot@15194000 {
+			reg = <0 0x15194000 0 0x1000>;
+			no-map;
+		};
+
 	};
 
 	soc {
-		#address-cells = <2>;
-		#size-cells = <2>;
 		compatible = "simple-bus";
 		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
 
 		gic: interrupt-controller@c000000 {
 			compatible = "arm,gic-v3";
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
 			reg = <0 0x0c000000 0 0x10000>,  /* GICD */
 			      <0 0x0c080000 0 0x80000>,  /* GICR */
 			      <0 0x0c400000 0 0x2000>,   /* GICC */
 			      <0 0x0c410000 0 0x1000>,   /* GICH */
 			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupt-parent = <&gic>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
 		};
 
 		infracfg: infracfg@10001000 {
 			compatible = "mediatek,mt7986-infracfg", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		wed_pcie: wed-pcie@10003000 {
+			compatible = "mediatek,mt7986-wed-pcie",
+				     "syscon";
+			reg = <0 0x10003000 0 0x10>;
 		};
 
 		topckgen: topckgen@1001b000 {
@@ -113,8 +160,7 @@
 		};
 
 		watchdog: watchdog@1001c000 {
-			compatible = "mediatek,mt7986-wdt",
-				     "mediatek,mt6589-wdt";
+			compatible = "mediatek,mt7986-wdt";
 			reg = <0 0x1001c000 0 0x1000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			#reset-cells = <1>;
@@ -148,6 +194,19 @@
 			#interrupt-cells = <2>;
 		};
 
+		pwm: pwm@10048000 {
+			compatible = "mediatek,mt7986-pwm";
+			reg = <0 0x10048000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_PWM_SEL>,
+				 <&infracfg CLK_INFRA_PWM_STA>,
+				 <&infracfg CLK_INFRA_PWM1_CK>,
+				 <&infracfg CLK_INFRA_PWM2_CK>;
+			clock-names = "top", "main", "pwm1", "pwm2";
+			status = "disabled";
+		};
+
 		sgmiisys0: syscon@10060000 {
 			compatible = "mediatek,mt7986-sgmiisys_0",
 				     "syscon";
@@ -162,7 +221,7 @@
 			#clock-cells = <1>;
 		};
 
-		trng: trng@1020f000 {
+		trng: rng@1020f000 {
 			compatible = "mediatek,mt7986-rng",
 				     "mediatek,mt7623-rng";
 			reg = <0 0x1020f000 0 0x100>;
@@ -171,6 +230,20 @@
 			status = "disabled";
 		};
 
+		crypto: crypto@10320000 {
+			compatible = "inside-secure,safexcel-eip97";
+			reg = <0 0x10320000 0 0x40000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ring0", "ring1", "ring2", "ring3";
+			clocks = <&infracfg CLK_INFRA_EIP97_CK>;
+			assigned-clocks = <&topckgen CLK_TOP_EIP_B_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>;
+			status = "disabled";
+		};
+
 		uart0: serial@11002000 {
 			compatible = "mediatek,mt7986-uart",
 				     "mediatek,mt6577-uart";
@@ -212,9 +285,209 @@
 			status = "disabled";
 		};
 
+		i2c0: i2c@11008000 {
+			compatible = "mediatek,mt7986-i2c";
+			reg = <0 0x11008000 0 0x90>,
+			      <0 0x10217080 0 0x80>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <5>;
+			clocks = <&infracfg CLK_INFRA_I2C0_CK>,
+				 <&infracfg CLK_INFRA_AP_DMA_CK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x1100a000 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI0_CK>,
+				 <&infracfg CLK_INFRA_SPI0_HCK_CK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+			status = "disabled";
+		};
+
+		spi1: spi@1100b000 {
+			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x1100b000 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPIM_MST_SEL>,
+				 <&infracfg CLK_INFRA_SPI1_CK>,
+				 <&infracfg CLK_INFRA_SPI1_HCK_CK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+			status = "disabled";
+		};
+
+		thermal: thermal@1100c800 {
+			compatible = "mediatek,mt7986-thermal";
+			reg = <0 0x1100c800 0 0x800>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_THERM_CK>,
+				 <&infracfg CLK_INFRA_ADC_26M_CK>;
+			clock-names = "therm", "auxadc";
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+			#thermal-sensor-cells = <1>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+		};
+
+		auxadc: adc@1100d000 {
+			compatible = "mediatek,mt7986-auxadc";
+			reg = <0 0x1100d000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_ADC_26M_CK>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		ssusb: usb@11200000 {
+			compatible = "mediatek,mt7986-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x2e00>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_IUSB_SYS_CK>,
+				 <&infracfg CLK_INFRA_IUSB_CK>,
+				 <&infracfg CLK_INFRA_IUSB_133_CK>,
+				 <&infracfg CLK_INFRA_IUSB_66M_CK>,
+				 <&topckgen CLK_TOP_U2U3_XHCI_SEL>;
+			clock-names = "sys_ck",
+				      "ref_ck",
+				      "mcu_ck",
+				      "dma_ck",
+				      "xhci_ck";
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>,
+			       <&u2port1 PHY_TYPE_USB2>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt7986-mmc";
+			reg = <0 0x11230000 0 0x1000>,
+			      <0 0x11c20000 0 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			assigned-clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
+					  <&topckgen CLK_TOP_EMMC_250M_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_MPLL>,
+						 <&topckgen CLK_TOP_NET1PLL_D5_D2>;
+			clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
+				 <&infracfg CLK_INFRA_MSDC_HCK_CK>,
+				 <&infracfg CLK_INFRA_MSDC_CK>,
+				 <&infracfg CLK_INFRA_MSDC_133M_CK>,
+				 <&infracfg CLK_INFRA_MSDC_66M_CK>;
+			clock-names = "source", "hclk", "source_cg", "bus_clk",
+				      "sys_cg";
+			status = "disabled";
+		};
+
+		pcie: pcie@11280000 {
+			compatible = "mediatek,mt7986-pcie",
+				     "mediatek,mt8192-pcie";
+			reg = <0x00 0x11280000 0x00 0x4000>;
+			reg-names = "pcie-mac";
+			ranges = <0x82000000 0x00 0x20000000 0x00
+				  0x20000000 0x00 0x10000000>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>,
+				 <&infracfg CLK_INFRA_IPCIE_CK>,
+				 <&infracfg CLK_INFRA_IPCIER_CK>,
+				 <&infracfg CLK_INFRA_IPCIEB_CK>;
+			clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m";
+
+			phys = <&pcie_port PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,
+					<0 0 0 2 &pcie_intc 1>,
+					<0 0 0 3 &pcie_intc 2>,
+					<0 0 0 4 &pcie_intc 3>;
+			status = "disabled";
+
+			pcie_intc: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		pcie_phy: t-phy@11c00000 {
+			compatible = "mediatek,mt7986-tphy",
+				     "mediatek,generic-tphy-v2";
+			ranges = <0 0 0x11c00000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			pcie_port: pcie-phy@0 {
+				reg = <0 0x20000>;
+				clocks = <&clk40m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		efuse: efuse@11d00000 {
+			compatible = "mediatek,mt7986-efuse", "mediatek,efuse";
+			reg = <0 0x11d00000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			thermal_calibration: calib@274 {
+				reg = <0x274 0xc>;
+			};
+		};
+
+		usb_phy: t-phy@11e10000 {
+			compatible = "mediatek,mt7986-tphy",
+				     "mediatek,generic-tphy-v2";
+			ranges = <0 0 0x11e10000 0x1700>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>,
+					 <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u3port0: usb-phy@700 {
+				reg = <0x700 0x900>;
+				clocks = <&topckgen CLK_TOP_USB3_PHY_SEL>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			u2port1: usb-phy@1000 {
+				reg = <0x1000 0x700>;
+				clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>,
+					 <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
 		ethsys: syscon@15000000 {
-			 #address-cells = <1>;
-			 #size-cells = <1>;
 			 compatible = "mediatek,mt7986-ethsys",
 				      "syscon";
 			 reg = <0 0x15000000 0 0x1000>;
@@ -222,13 +495,45 @@
 			 #reset-cells = <1>;
 		};
 
+		wed0: wed@15010000 {
+			compatible = "mediatek,mt7986-wed",
+				     "syscon";
+			reg = <0 0x15010000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&wo_emi0>, <&wo_ilm0>, <&wo_dlm0>,
+					<&wo_data>, <&wo_boot>;
+			memory-region-names = "wo-emi", "wo-ilm", "wo-dlm",
+					      "wo-data", "wo-boot";
+			mediatek,wo-ccif = <&wo_ccif0>;
+		};
+
+		wed1: wed@15011000 {
+			compatible = "mediatek,mt7986-wed",
+				     "syscon";
+			reg = <0 0x15011000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&wo_emi1>, <&wo_ilm1>, <&wo_dlm1>,
+					<&wo_data>, <&wo_boot>;
+			memory-region-names = "wo-emi", "wo-ilm", "wo-dlm",
+					      "wo-data", "wo-boot";
+			mediatek,wo-ccif = <&wo_ccif1>;
+		};
+
 		eth: ethernet@15100000 {
 			compatible = "mediatek,mt7986-eth";
-			reg = <0 0x15100000 0 0x80000>;
+			reg = <0 0x15100000 0 0x40000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "fe0", "fe1", "fe2", "fe3", "pdma0",
+					  "pdma1", "pdma2", "pdma3";
 			clocks = <&ethsys CLK_ETH_FE_EN>,
 				 <&ethsys CLK_ETH_GP2_EN>,
 				 <&ethsys CLK_ETH_GP1_EN>,
@@ -254,13 +559,103 @@
 					  <&topckgen CLK_TOP_SGM_325M_SEL>;
 			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
 						 <&apmixedsys CLK_APMIXED_SGMPLL>;
-			mediatek,ethsys = <&ethsys>;
-			mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
-			#reset-cells = <1>;
+			sram = <&eth_sram>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			mediatek,ethsys = <&ethsys>;
+			mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
+			mediatek,wed-pcie = <&wed_pcie>;
+			mediatek,wed = <&wed0>, <&wed1>;
 			status = "disabled";
 		};
+
+		/*15100000+0x40000*/
+		eth_sram: sram@15140000 {
+			compatible = "mmio-sram";
+			reg = <0 0x15140000 0 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x15140000 0 0x40000>;
+		};
+
+		wo_ccif0: syscon@151a5000 {
+			compatible = "mediatek,mt7986-wo-ccif", "syscon";
+			reg = <0 0x151a5000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wo_ccif1: syscon@151ad000 {
+			compatible = "mediatek,mt7986-wo-ccif", "syscon";
+			reg = <0 0x151ad000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wifi: wifi@18000000 {
+			compatible = "mediatek,mt7986-wmac";
+			reg = <0 0x18000000 0 0x1000000>,
+			      <0 0x10003000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>;
+			resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
+			reset-names = "consys";
+			clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>,
+				 <&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
+			clock-names = "mcu", "ap2conn";
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&wmcpu_emi>;
+		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+			thermal-sensors = <&thermal 0>;
+
+			trips {
+				cpu_trip_crit: crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active_high: active-high {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_active_med: active-med {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_active_low: active-low {
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
index 0f49d5764ff3..58f77d932429 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -9,7 +9,8 @@
 
 / {
 	model = "MediaTek MT7986b RFB";
-	compatible = "mediatek,mt7986b-rfb";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt7986b-rfb", "mediatek,mt7986b";
 
 	aliases {
 		serial0 = &uart0;
@@ -25,7 +26,7 @@
 	};
 };
 
-&uart0 {
+&crypto {
 	status = "okay";
 };
 
@@ -44,6 +45,18 @@
 		};
 	};
 
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "rgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
 	mdio: mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -82,6 +95,18 @@
 					label = "lan4";
 				};
 
+				port@5 {
+					reg = <5>;
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
 				port@6 {
 					reg = <6>;
 					label = "cpu";
@@ -98,3 +123,91 @@
 		};
 	};
 };
+
+&pio {
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	spic_pins: spic-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_2";
+		};
+	};
+
+	wf_2g_5g_pins: wf-2g-5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_2g", "wf_5g";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_dbdc_pins: wf-dbdc-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_dbdc";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+
+	spi_nand: flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+};
+
+&ssusb {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	pinctrl-names = "default", "dbdc";
+	pinctrl-0 = <&wf_2g_5g_pins>;
+	pinctrl-1 = <&wf_dbdc_pins>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
index 23923b9f8944..db5189664c29 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
@@ -5,6 +5,9 @@
  */
 
 #include "mt7986a.dtsi"
+/ {
+	compatible = "mediatek,mt7986b";
+};
 
 &pio {
 	compatible = "mediatek,mt7986b-pinctrl";
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts
new file mode 100644
index 000000000000..6f0c81e3fd94
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include "mt7988a-bananapi-bpi-r4.dtsi"
+
+/ {
+	compatible = "bananapi,bpi-r4-2g5", "bananapi,bpi-r4", "mediatek,mt7988a";
+	model = "Banana Pi BPI-R4 (1x SFP+, 1x 2.5GbE)";
+	chassis-type = "embedded";
+};
+
+&gmac1 {
+	phy = <&int_2p5g_phy>;
+	phy-mode = "internal";
+	status = "okay";
+};
+
+&int_2p5g_phy {
+	pinctrl-0 = <&i2p5gbe_led0_pins>;
+	pinctrl-names = "i2p5gbe-led";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso
new file mode 100644
index 000000000000..3e320b2f83d5
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
+};
+
+&{/soc/mmc@11230000} {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_emmc_51>;
+	pinctrl-1 = <&mmc0_pins_emmc_51>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	hs400-ds-delay = <0x12814>;
+	vqmmc-supply = <&reg_1p8v>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso
new file mode 100644
index 000000000000..663c6345dd31
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
+};
+
+&{/soc/mmc@11230000} {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_sdcard>;
+	pinctrl-1 = <&mmc0_pins_sdcard>;
+	cd-gpios = <&pio 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	max-frequency = <52000000>;
+	cap-sd-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	no-mmc;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
new file mode 100644
index 000000000000..4b3796ba82e3
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include "mt7988a-bananapi-bpi-r4.dtsi"
+
+/ {
+	compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
+	model = "Banana Pi BPI-R4 (2x SFP+)";
+	chassis-type = "embedded";
+
+	/* SFP2 cage (LAN) */
+	sfp2: sfp2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		maximum-power-milliwatt = <3000>;
+
+		los-gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pio 83 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&pio 3 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gmac1 {
+	managed = "in-band-status";
+	phy-mode = "usxgmii";
+	sfp = <&sfp2>;
+};
+
+&pca9545 {
+	i2c_sfp2: i2c@2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
new file mode 100644
index 000000000000..0ff69dae45d3
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7988a.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		/* cooling level (0, 1, 2, 3) : (0% duty, 30% duty, 50% duty, 100% duty) */
+		cooling-levels = <0 80 128 255>;
+		#cooling-cells = <2>;
+		pwms = <&pwm 0 50000>;
+		status = "okay";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led_green: led-green {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 79 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led_blue: led-blue {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 63 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	/* SFP1 cage (WAN) */
+	sfp1: sfp1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		maximum-power-milliwatt = <3000>;
+
+		los-gpios = <&pio 54 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pio 82 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&pio 21 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&pio 70 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&pio 69 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&cci {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu0 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu1 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu2 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu3 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_trip_hot: hot {
+			temperature = <120000>;
+			hysteresis = <2000>;
+			type = "hot";
+		};
+
+		cpu_trip_active_high: active-high {
+			temperature = <115000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_trip_active_med: active-med {
+			temperature = <85000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_trip_active_low: active-low {
+			temperature = <40000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map-cpu-active-high {
+			/* active: set fan to cooling level 2 */
+			cooling-device = <&fan 3 3>;
+			trip = <&cpu_trip_active_high>;
+		};
+
+		map-cpu-active-med {
+			/* active: set fan to cooling level 1 */
+			cooling-device = <&fan 2 2>;
+			trip = <&cpu_trip_active_med>;
+		};
+
+		map-cpu-active-low {
+			/* active: set fan to cooling level 0 */
+			cooling-device = <&fan 1 1>;
+			trip = <&cpu_trip_active_low>;
+		};
+	};
+};
+
+&gmac2 {
+	managed = "in-band-status";
+	phy-mode = "usxgmii";
+	sfp = <&sfp1>;
+};
+
+&gsw_phy0 {
+	pinctrl-0 = <&gbe0_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy0_led0 {
+	function = LED_FUNCTION_WAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port0 {
+	label = "wan";
+};
+
+&gsw_phy1 {
+	pinctrl-0 = <&gbe1_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy1_led0 {
+	function = LED_FUNCTION_LAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port1 {
+	label = "lan1";
+};
+
+&gsw_phy2 {
+	pinctrl-0 = <&gbe2_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy2_led0 {
+	function = LED_FUNCTION_LAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port2 {
+	label = "lan2";
+};
+
+&gsw_phy3 {
+	pinctrl-0 = <&gbe3_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy3_led0 {
+	function = LED_FUNCTION_LAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port3 {
+	label = "lan3";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	rt5190a_64: rt5190a@64 {
+		compatible = "richtek,rt5190a";
+		reg = <0x64>;
+		vin2-supply = <&rt5190_buck1>;
+		vin3-supply = <&rt5190_buck1>;
+		vin4-supply = <&rt5190_buck1>;
+
+		regulators {
+			rt5190_buck1: buck1 {
+				regulator-name = "rt5190a-buck1";
+				regulator-min-microvolt = <5090000>;
+				regulator-max-microvolt = <5090000>;
+				regulator-allowed-modes =
+				<RT5190A_OPMODE_AUTO>, <RT5190A_OPMODE_FPWM>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			buck2 {
+				regulator-name = "vcore";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			rt5190_buck3: buck3 {
+				regulator-name = "vproc";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+			};
+			buck4 {
+				regulator-name = "rt5190a-buck4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes =
+				<RT5190A_OPMODE_AUTO>, <RT5190A_OPMODE_FPWM>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			ldo {
+				regulator-name = "rt5190a-ldo";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_1_pins>;
+	status = "okay";
+
+	pca9545: i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		reset-gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			pcf8563: rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+				#clock-cells = <0>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+				size = <256>;
+			};
+
+		};
+
+		i2c_sfp1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+/* mPCIe SIM2 */
+&pcie0 {
+	status = "okay";
+};
+
+/* mPCIe SIM3 */
+&pcie1 {
+	status = "okay";
+};
+
+/* M.2 key-B SIM1 */
+&pcie2 {
+	status = "okay";
+};
+
+/* M.2 key-M SSD */
+&pcie3 {
+	status = "okay";
+};
+
+&pio {
+	i2c0_pins: i2c0-g0-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c0_1";
+		};
+	};
+
+	i2c1_pins: i2c1-g0-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c1_0";
+		};
+	};
+
+	i2c2_1_pins: i2c2-g1-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c2_1";
+		};
+	};
+
+	gbe0_led0_pins: gbe0-led0-pins {
+		mux {
+			function = "led";
+			groups = "gbe0_led0";
+		};
+	};
+
+	gbe1_led0_pins: gbe1-led0-pins {
+		mux {
+			function = "led";
+			groups = "gbe1_led0";
+		};
+	};
+
+	gbe2_led0_pins: gbe2-led0-pins {
+		mux {
+			function = "led";
+			groups = "gbe2_led0";
+		};
+	};
+
+	gbe3_led0_pins: gbe3-led0-pins {
+		mux {
+			function = "led";
+			groups = "gbe3_led0";
+		};
+	};
+
+	i2p5gbe_led0_pins: 2p5gbe-led0-pins {
+		mux {
+			function = "led";
+			groups = "2p5gbe_led0";
+		};
+	};
+
+	mmc0_pins_emmc_45: mmc0-emmc-45-pins {
+		mux {
+			function = "flash";
+			groups = "emmc_45";
+		};
+	};
+
+	mmc0_pins_emmc_51: mmc0-emmc-51-pins {
+		mux {
+			function = "flash";
+			groups = "emmc_51";
+		};
+	};
+
+	mmc0_pins_sdcard: mmc0-sdcard-pins {
+		mux {
+			function = "flash";
+			groups = "sdcard";
+		};
+	};
+
+	spi0_flash_pins: spi0-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+};
+
+&pwm {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_flash_pins>;
+	status = "okay";
+
+	spi_nand: flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&spi_nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "bl2";
+			reg = <0x0 0x200000>;
+			read-only;
+		};
+	};
+};
+
+&ssusb1 {
+	status = "okay";
+};
+
+&tphy {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&xsphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
new file mode 100644
index 000000000000..366203a72d6d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -0,0 +1,1034 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+#include <dt-bindings/clock/mediatek,mt7988-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/mt65xx.h>
+#include <dt-bindings/reset/mediatek,mt7988-resets.h>
+
+/ {
+	compatible = "mediatek,mt7988a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cci: cci {
+		compatible = "mediatek,mt7988-cci", "mediatek,mt8183-cci";
+		clocks = <&mcusys CLK_MCU_BUS_DIV_SEL>,
+			 <&topckgen CLK_TOP_XTAL>;
+		clock-names = "cci", "intermediate";
+		operating-points-v2 = <&cci_opp>;
+	};
+
+	cci_opp: opp-table-cci {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-660000000 {
+			opp-hz = /bits/ 64 <660000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-1080000000 {
+			opp-hz = /bits/ 64 <1080000000>;
+			opp-microvolt = <900000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a73";
+			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
+				 <&topckgen CLK_TOP_XTAL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a73";
+			reg = <0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
+				 <&topckgen CLK_TOP_XTAL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a73";
+			reg = <0x2>;
+			device_type = "cpu";
+			enable-method = "psci";
+			clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
+				 <&topckgen CLK_TOP_XTAL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a73";
+			reg = <0x3>;
+			device_type = "cpu";
+			enable-method = "psci";
+			clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
+				 <&topckgen CLK_TOP_XTAL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			mediatek,cci = <&cci>;
+		};
+
+		cluster0_opp: opp-table-0 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-800000000 {
+				opp-hz = /bits/ 64 <800000000>;
+				opp-microvolt = <850000>;
+			};
+			opp-1100000000 {
+				opp-hz = /bits/ 64 <1100000000>;
+				opp-microvolt = <850000>;
+			};
+			opp-1500000000 {
+				opp-hz = /bits/ 64 <1500000000>;
+				opp-microvolt = <850000>;
+			};
+			opp-1800000000 {
+				opp-hz = /bits/ 64 <1800000000>;
+				opp-microvolt = <900000>;
+			};
+		};
+	};
+
+	oscillator-40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		#clock-cells = <0>;
+		clock-output-names = "clkxtal";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a73-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 320 KiB reserved for ARM Trusted Firmware (BL31 and BL32) */
+		secmon@43000000 {
+			reg = <0 0x43000000 0 0x50000>;
+			no-map;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
+			      <0 0x0c080000 0 0x200000>, /* GICR */
+			      <0 0x0c400000 0 0x2000>,   /* GICC */
+			      <0 0x0c410000 0 0x1000>,   /* GICH */
+			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		infracfg: clock-controller@10001000 {
+			compatible = "mediatek,mt7988-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		topckgen: clock-controller@1001b000 {
+			compatible = "mediatek,mt7988-topckgen", "syscon";
+			reg = <0 0x1001b000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7988-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: clock-controller@1001e000 {
+			compatible = "mediatek,mt7988-apmixedsys";
+			reg = <0 0x1001e000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1001f000 {
+			compatible = "mediatek,mt7988-pinctrl";
+			reg = <0 0x1001f000 0 0x1000>,
+			      <0 0x11c10000 0 0x1000>,
+			      <0 0x11d00000 0 0x1000>,
+			      <0 0x11d20000 0 0x1000>,
+			      <0 0x11e00000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio", "iocfg_tr",
+				    "iocfg_br", "iocfg_rb",
+				    "iocfg_lb", "iocfg_tl", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 84>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+
+			pcie0_pins: pcie0-pins {
+				mux {
+					function = "pcie";
+					groups = "pcie_2l_0_pereset", "pcie_clk_req_n0_0",
+						 "pcie_wake_n0_0";
+				};
+			};
+
+			pcie1_pins: pcie1-pins {
+				mux {
+					function = "pcie";
+					groups = "pcie_2l_1_pereset", "pcie_clk_req_n1",
+						 "pcie_wake_n1_0";
+				};
+			};
+
+			pcie2_pins: pcie2-pins {
+				mux {
+					function = "pcie";
+					groups = "pcie_1l_0_pereset", "pcie_clk_req_n2_0",
+						 "pcie_wake_n2_0";
+				};
+			};
+
+			pcie3_pins: pcie3-pins {
+				mux {
+					function = "pcie";
+					groups = "pcie_1l_1_pereset", "pcie_clk_req_n3",
+						 "pcie_wake_n3_0";
+				};
+			};
+
+			spi1_pins: spi1-pins {
+				mux {
+					function = "spi";
+					groups = "spi1";
+				};
+			};
+
+			uart0_pins: uart0-pins {
+				mux {
+					function = "uart";
+					groups =  "uart0";
+				};
+			};
+		};
+
+		pwm: pwm@10048000 {
+			compatible = "mediatek,mt7988-pwm";
+			reg = <0 0x10048000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_66M_PWM_BCK>,
+				 <&infracfg CLK_INFRA_66M_PWM_HCK>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK1>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK2>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK3>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK4>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK5>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK6>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK7>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK8>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
+				      "pwm4", "pwm5", "pwm6", "pwm7", "pwm8";
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		mcusys: mcusys@100e0000 {
+			compatible = "mediatek,mt7988-mcusys", "syscon";
+			reg = <0 0x100e0000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		serial0: serial@11000000 {
+			compatible = "mediatek,mt7988-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11000000 0 0x100>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart", "wakeup";
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&infracfg CLK_INFRA_52M_UART0_CK>;
+			clock-names = "baud", "bus";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
+			status = "disabled";
+		};
+
+		serial@11000100 {
+			compatible = "mediatek,mt7988-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11000100 0 0x100>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart", "wakeup";
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&infracfg CLK_INFRA_52M_UART1_CK>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		serial@11000200 {
+			compatible = "mediatek,mt7988-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11000200 0 0x100>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart", "wakeup";
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&infracfg CLK_INFRA_52M_UART2_CK>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		i2c0: i2c@11003000 {
+			compatible = "mediatek,mt7981-i2c";
+			reg = <0 0x11003000 0 0x1000>,
+			      <0 0x10217080 0 0x80>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_INFRA_I2C_BCK>,
+				 <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11004000 {
+			compatible = "mediatek,mt7981-i2c";
+			reg = <0 0x11004000 0 0x1000>,
+			      <0 0x10217100 0 0x80>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_INFRA_I2C_BCK>,
+				 <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11005000 {
+			compatible = "mediatek,mt7981-i2c";
+			reg = <0 0x11005000 0 0x1000>,
+			      <0 0x10217180 0 0x80>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_INFRA_I2C_BCK>,
+				 <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@11007000 {
+			compatible = "mediatek,mt7988-spi-quad", "mediatek,spi-ipm";
+			reg = <0 0x11007000 0 0x100>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_104M_SPI0>,
+				 <&infracfg CLK_INFRA_66M_SPI0_HCK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk",
+				      "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@11008000 {
+			compatible = "mediatek,mt7988-spi-single", "mediatek,spi-ipm";
+			reg = <0 0x11008000 0 0x100>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPIM_MST_SEL>,
+				 <&infracfg CLK_INFRA_104M_SPI1>,
+				 <&infracfg CLK_INFRA_66M_SPI1_HCK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk",
+				      "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>;
+			status = "disabled";
+		};
+
+		spi2: spi@11009000 {
+			compatible = "mediatek,mt7988-spi-quad", "mediatek,spi-ipm";
+			reg = <0 0x11009000 0 0x100>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_104M_SPI2_BCK>,
+				 <&infracfg CLK_INFRA_66M_SPI2_HCK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk",
+				      "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		lvts: lvts@1100a000 {
+			compatible = "mediatek,mt7988-lvts-ap";
+			#thermal-sensor-cells = <1>;
+			reg = <0 0x1100a000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_26M_THERM_SYSTEM>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&infracfg MT7988_INFRA_RST1_THERM_CTRL_SWRST>;
+			nvmem-cells = <&lvts_calibration>;
+			nvmem-cell-names = "lvts-calib-data-1";
+		};
+
+		usb@11190000 {
+			compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x11190000 0 0x2e00>,
+			      <0 0x11193e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_USB_SYS>,
+				 <&infracfg CLK_INFRA_USB_REF>,
+				 <&infracfg CLK_INFRA_66M_USB_HCK>,
+				 <&infracfg CLK_INFRA_133M_USB_HCK>,
+				 <&infracfg CLK_INFRA_USB_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+			phys = <&xphyu2port0 PHY_TYPE_USB2>,
+			       <&xphyu3port0 PHY_TYPE_USB3>;
+			status = "disabled";
+		};
+
+		ssusb1: usb@11200000 {
+			compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x2e00>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_USB_SYS_CK_P1>,
+				 <&infracfg CLK_INFRA_USB_CK_P1>,
+				 <&infracfg CLK_INFRA_66M_USB_HCK_CK_P1>,
+				 <&infracfg CLK_INFRA_133M_USB_HCK_CK_P1>,
+				 <&infracfg CLK_INFRA_USB_XHCI_CK_P1>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+			phys = <&tphyu2port0 PHY_TYPE_USB2>,
+			       <&tphyu3port0 PHY_TYPE_USB3>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt7988-mmc";
+			reg = <0 0x11230000 0 0x1000>,
+			      <0 0x11D60000 0 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_MSDC400>,
+				 <&infracfg CLK_INFRA_MSDC2_HCK>,
+				 <&infracfg CLK_INFRA_66M_MSDC_0_HCK>,
+				 <&infracfg CLK_INFRA_133M_MSDC_0_HCK>;
+			assigned-clocks = <&topckgen CLK_TOP_EMMC_250M_SEL>,
+					  <&topckgen CLK_TOP_EMMC_400M_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_NET1PLL_D5_D2>,
+						 <&apmixedsys CLK_APMIXED_MSDCPLL>;
+			clock-names = "source", "hclk", "axi_cg", "ahb_cg";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie2: pcie@11280000 {
+			compatible = "mediatek,mt7986-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x11280000 0 0x2000>;
+			reg-names = "pcie-mac";
+			linux,pci-domain = <3>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0x00 0x20000000 0x00
+				  0x20000000 0x00 0x00200000>,
+				 <0x82000000 0x00 0x20200000 0x00
+				  0x20200000 0x00 0x07e00000>;
+			clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P2>,
+				 <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P2>,
+				 <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P2>,
+				 <&infracfg CLK_INFRA_133M_PCIE_CK_P2>;
+			clock-names = "pl_250m", "tl_26m", "peri_26m",
+				      "top_133m";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie2_pins>;
+			status = "disabled";
+
+			phys = <&xphyu3port0 PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &pcie_intc2 0>,
+					<0 0 0 2 &pcie_intc2 1>,
+					<0 0 0 3 &pcie_intc2 2>,
+					<0 0 0 4 &pcie_intc2 3>;
+			pcie_intc2: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		pcie3: pcie@11290000 {
+			compatible = "mediatek,mt7986-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x11290000 0 0x2000>;
+			reg-names = "pcie-mac";
+			linux,pci-domain = <2>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0x00 0x28000000 0x00
+				  0x28000000 0x00 0x00200000>,
+				 <0x82000000 0x00 0x28200000 0x00
+				  0x28200000 0x00 0x07e00000>;
+			clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P3>,
+				 <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P3>,
+				 <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P3>,
+				 <&infracfg CLK_INFRA_133M_PCIE_CK_P3>;
+			clock-names = "pl_250m", "tl_26m", "peri_26m",
+				      "top_133m";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie3_pins>;
+			status = "disabled";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &pcie_intc3 0>,
+					<0 0 0 2 &pcie_intc3 1>,
+					<0 0 0 3 &pcie_intc3 2>,
+					<0 0 0 4 &pcie_intc3 3>;
+			pcie_intc3: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		pcie0: pcie@11300000 {
+			compatible = "mediatek,mt7986-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x11300000 0 0x2000>;
+			reg-names = "pcie-mac";
+			linux,pci-domain = <0>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0x00 0x30000000 0x00
+				  0x30000000 0x00 0x00200000>,
+				 <0x82000000 0x00 0x30200000 0x00
+				  0x30200000 0x00 0x07e00000>;
+			clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P0>,
+				 <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P0>,
+				 <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P0>,
+				 <&infracfg CLK_INFRA_133M_PCIE_CK_P0>;
+			clock-names = "pl_250m", "tl_26m", "peri_26m",
+				      "top_133m";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie0_pins>;
+			status = "disabled";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+			pcie_intc0: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		pcie1: pcie@11310000 {
+			compatible = "mediatek,mt7986-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x11310000 0 0x2000>;
+			reg-names = "pcie-mac";
+			linux,pci-domain = <1>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0x00 0x38000000 0x00
+				  0x38000000 0x00 0x00200000>,
+				 <0x82000000 0x00 0x38200000 0x00
+				  0x38200000 0x00 0x07e00000>;
+			clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P1>,
+				 <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P1>,
+				 <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P1>,
+				 <&infracfg CLK_INFRA_133M_PCIE_CK_P1>;
+			clock-names = "pl_250m", "tl_26m", "peri_26m",
+				      "top_133m";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie1_pins>;
+			status = "disabled";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			pcie_intc1: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		tphy: t-phy@11c50000 {
+			compatible = "mediatek,mt7986-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			tphyu2port0: usb-phy@11c50000 {
+				reg = <0 0x11c50000 0 0x700>;
+				clocks = <&infracfg CLK_INFRA_USB_UTMI_CK_P1>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			tphyu3port0: usb-phy@11c50700 {
+				reg = <0 0x11c50700 0 0x900>;
+				clocks = <&infracfg CLK_INFRA_USB_PIPE_CK_P1>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+
+		topmisc: system-controller@11d10084 {
+			compatible = "mediatek,mt7988-topmisc",
+				     "syscon";
+			reg = <0 0x11d10084 0 0xff80>;
+		};
+
+		xsphy: xs-phy@11e10000 {
+			compatible = "mediatek,mt7988-xsphy",
+				     "mediatek,xsphy";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			xphyu2port0: usb-phy@11e10000 {
+				reg = <0 0x11e10000 0 0x400>;
+				clocks = <&infracfg CLK_INFRA_USB_UTMI>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			xphyu3port0: usb-phy@11e13000 {
+				reg = <0 0x11e13400 0 0x500>;
+				clocks = <&infracfg CLK_INFRA_USB_PIPE>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				mediatek,syscon-type = <&topmisc 0x194 0>;
+			};
+		};
+
+		xfi_tphy0: phy@11f20000 {
+			compatible = "mediatek,mt7988-xfi-tphy";
+			reg = <0 0x11f20000 0 0x10000>;
+			clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
+				 <&topckgen CLK_TOP_XFI_PHY_0_XTAL_SEL>;
+			clock-names = "xfipll", "topxtal";
+			resets = <&watchdog 14>;
+			mediatek,usxgmii-performance-errata;
+			#phy-cells = <0>;
+		};
+
+		xfi_tphy1: phy@11f30000 {
+			compatible = "mediatek,mt7988-xfi-tphy";
+			reg = <0 0x11f30000 0 0x10000>;
+			clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
+				 <&topckgen CLK_TOP_XFI_PHY_1_XTAL_SEL>;
+			clock-names = "xfipll", "topxtal";
+			resets = <&watchdog 15>;
+			#phy-cells = <0>;
+		};
+
+		xfi_pll: clock-controller@11f40000 {
+			compatible = "mediatek,mt7988-xfi-pll";
+			reg = <0 0x11f40000 0 0x1000>;
+			resets = <&watchdog 16>;
+			#clock-cells = <1>;
+		};
+
+		efuse@11f50000 {
+			compatible = "mediatek,mt7988-efuse", "mediatek,efuse";
+			reg = <0 0x11f50000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			lvts_calibration: calib@918 {
+				reg = <0x918 0x28>;
+			};
+
+			phy_calibration_p0: calib@940 {
+				reg = <0x940 0x10>;
+			};
+
+			phy_calibration_p1: calib@954 {
+				reg = <0x954 0x10>;
+			};
+
+			phy_calibration_p2: calib@968 {
+				reg = <0x968 0x10>;
+			};
+
+			phy_calibration_p3: calib@97c {
+				reg = <0x97c 0x10>;
+			};
+		};
+
+		ethsys: clock-controller@15000000 {
+			compatible = "mediatek,mt7988-ethsys", "syscon";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		switch: switch@15020000 {
+			compatible = "mediatek,mt7988-switch";
+			reg = <0 0x15020000 0 0x8000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ethwarp MT7988_ETHWARP_RST_SWITCH>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gsw_port0: port@0 {
+					reg = <0>;
+					phy-handle = <&gsw_phy0>;
+					phy-mode = "internal";
+				};
+
+				gsw_port1: port@1 {
+					reg = <1>;
+					phy-handle = <&gsw_phy1>;
+					phy-mode = "internal";
+				};
+
+				gsw_port2: port@2 {
+					reg = <2>;
+					phy-handle = <&gsw_phy2>;
+					phy-mode = "internal";
+				};
+
+				gsw_port3: port@3 {
+					reg = <3>;
+					phy-handle = <&gsw_phy3>;
+					phy-mode = "internal";
+				};
+
+				port@6 {
+					reg = <6>;
+					ethernet = <&gmac0>;
+					phy-mode = "internal";
+
+					fixed-link {
+						speed = <10000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mediatek,pio = <&pio>;
+
+				gsw_phy0: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0>;
+					interrupts = <0>;
+					nvmem-cells = <&phy_calibration_p0>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy0_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy0_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy1: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <1>;
+					interrupts = <1>;
+					nvmem-cells = <&phy_calibration_p1>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy1_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy1_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy2: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <2>;
+					interrupts = <2>;
+					nvmem-cells = <&phy_calibration_p2>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy2_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy2_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy3: ethernet-phy@3 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <3>;
+					interrupts = <3>;
+					nvmem-cells = <&phy_calibration_p3>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy3_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy3_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+			};
+		};
+
+		ethwarp: clock-controller@15031000 {
+			compatible = "mediatek,mt7988-ethwarp";
+			reg = <0 0x15031000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		eth: ethernet@15100000 {
+			compatible = "mediatek,mt7988-eth";
+			reg = <0 0x15100000 0 0x40000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "fe0", "fe1", "fe2", "fe3", "pdma0",
+					  "pdma1", "pdma2", "pdma3";
+			clocks = <&ethsys CLK_ETHDMA_CRYPT0_EN>,
+				 <&ethsys CLK_ETHDMA_FE_EN>,
+				 <&ethsys CLK_ETHDMA_GP2_EN>,
+				 <&ethsys CLK_ETHDMA_GP1_EN>,
+				 <&ethsys CLK_ETHDMA_GP3_EN>,
+				 <&ethwarp CLK_ETHWARP_WOCPU2_EN>,
+				 <&ethwarp CLK_ETHWARP_WOCPU1_EN>,
+				 <&ethwarp CLK_ETHWARP_WOCPU0_EN>,
+				 <&ethsys CLK_ETHDMA_ESW_EN>,
+				 <&topckgen CLK_TOP_ETH_GMII_SEL>,
+				 <&topckgen CLK_TOP_ETH_REFCK_50M_SEL>,
+				 <&topckgen CLK_TOP_ETH_SYS_200M_SEL>,
+				 <&topckgen CLK_TOP_ETH_SYS_SEL>,
+				 <&topckgen CLK_TOP_ETH_XGMII_SEL>,
+				 <&topckgen CLK_TOP_ETH_MII_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_500M_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_PAO_2X_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_SYNC_250M_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_PPEFB_250M_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_WARP_SEL>,
+				 <&ethsys CLK_ETHDMA_XGP1_EN>,
+				 <&ethsys CLK_ETHDMA_XGP2_EN>,
+				 <&ethsys CLK_ETHDMA_XGP3_EN>;
+			clock-names = "crypto", "fe", "gp2", "gp1", "gp3",
+				      "ethwarp_wocpu2", "ethwarp_wocpu1",
+				      "ethwarp_wocpu0", "esw", "top_eth_gmii_sel",
+				      "top_eth_refck_50m_sel", "top_eth_sys_200m_sel",
+				      "top_eth_sys_sel", "top_eth_xgmii_sel",
+				      "top_eth_mii_sel", "top_netsys_sel",
+				      "top_netsys_500m_sel", "top_netsys_pao_2x_sel",
+				      "top_netsys_sync_250m_sel",
+				      "top_netsys_ppefb_250m_sel",
+				      "top_netsys_warp_sel","xgp1", "xgp2", "xgp3";
+			assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>,
+					  <&topckgen CLK_TOP_NETSYS_GSW_SEL>,
+					  <&topckgen CLK_TOP_USXGMII_SBUS_0_SEL>,
+					  <&topckgen CLK_TOP_USXGMII_SBUS_1_SEL>,
+					  <&topckgen CLK_TOP_SGM_0_SEL>,
+					  <&topckgen CLK_TOP_SGM_1_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
+						 <&topckgen CLK_TOP_NET1PLL_D4>,
+						 <&topckgen CLK_TOP_NET1PLL_D8_D4>,
+						 <&topckgen CLK_TOP_NET1PLL_D8_D4>,
+						 <&apmixedsys CLK_APMIXED_SGMPLL>,
+						 <&apmixedsys CLK_APMIXED_SGMPLL>;
+			sram = <&eth_sram>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mediatek,ethsys = <&ethsys>;
+			mediatek,infracfg = <&topmisc>;
+
+			gmac0: mac@0 {
+				compatible = "mediatek,eth-mac";
+				reg = <0>;
+				phy-mode = "internal";
+
+				/* Connected to internal switch */
+				fixed-link {
+					speed = <10000>;
+					full-duplex;
+					pause;
+				};
+			};
+
+			gmac1: mac@1 {
+				compatible = "mediatek,eth-mac";
+				reg = <1>;
+				status = "disabled";
+			};
+
+			gmac2: mac@2 {
+				compatible = "mediatek,eth-mac";
+				reg = <2>;
+				status = "disabled";
+			};
+
+			mdio_bus: mdio-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* internal 2.5G PHY */
+				int_2p5g_phy: ethernet-phy@15 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <15>;
+				};
+			};
+		};
+
+		eth_sram: sram@15400000 {
+			compatible = "mmio-sram";
+			reg = <0 0x15400000 0 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x15400000 0 0x200000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+			thermal-sensors = <&lvts 0>;
+			trips {
+				cpu_trip_crit: crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts
index 774a2f3fb4b2..ebf1a358f42a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts
@@ -11,6 +11,7 @@
 
 / {
 	model = "Pumpkin MT8167";
+	chassis-type = "embedded";
 	compatible = "mediatek,mt8167-pumpkin", "mediatek,mt8167";
 
 	memory@40000000 {
diff --git a/arch/arm64/boot/dts/mediatek/mt8167.dtsi b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
index 54655f2feb04..2374c0953057 100644
--- a/arch/arm64/boot/dts/mediatek/mt8167.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
@@ -36,9 +36,8 @@
 		};
 
 		scpsys: syscon@10006000 {
-			compatible = "syscon", "simple-mfd";
+			compatible = "mediatek,mt8167-scpsys", "syscon", "simple-mfd";
 			reg = <0 0x10006000 0 0x1000>;
-			#power-domain-cells = <1>;
 
 			spm: power-controller {
 				compatible = "mediatek,mt8167-power-controller";
@@ -118,7 +117,6 @@
 			compatible = "mediatek,mt8167-pinctrl";
 			reg = <0 0x1000b000 0 0x1000>;
 			mediatek,pctl-regmap = <&syscfg_pctl>;
-			pins-are-numbered;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -126,7 +124,7 @@
 			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		mmsys: mmsys@14000000 {
+		mmsys: syscon@14000000 {
 			compatible = "mediatek,mt8167-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
index 28433b94f7c7..1c9fc791bdfc 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
@@ -8,12 +8,13 @@
 
 / {
 	model = "Google Hanawl";
+	chassis-type = "laptop";
 	compatible = "google,hana-rev7", "mediatek,mt8173";
 };
 
 &cpu_thermal {
 	trips {
-		cpu_crit: cpu_crit0 {
+		cpu_crit: cpu-crit0 {
 			temperature = <100000>;
 			type = "critical";
 		};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts
index c234296755e1..fcf0cb76a87c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts
@@ -8,6 +8,7 @@
 
 / {
 	model = "Google Hana";
+	chassis-type = "laptop";
 	compatible = "google,hana-rev6", "google,hana-rev5",
 		     "google,hana-rev4", "google,hana-rev3",
 		     "google,hana", "mediatek,mt8173";
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
index bdcd35cecad9..dfc5c2f0ddef 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
@@ -13,8 +13,8 @@
 	touchscreen2: touchscreen@34 {
 		compatible = "melfas,mip4_ts";
 		reg = <0x34>;
-		interrupt-parent = <&pio>;
-		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
+		status = "fail-needs-probe";
 	};
 
 	/*
@@ -26,8 +26,18 @@
 		compatible = "hid-over-i2c";
 		reg = <0x20>;
 		hid-descr-addr = <0x0020>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
+		status = "fail-needs-probe";
+	};
+
+	/* Lenovo Ideapad C330 uses G2Touch touchscreen as a 2nd source touchscreen */
+	touchscreen@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+		hid-descr-addr = <0x0001>;
 		interrupt-parent = <&pio>;
 		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+		status = "fail-needs-probe";
 	};
 };
 
@@ -39,11 +49,21 @@
 	 */
 	trackpad2: trackpad@2c {
 		compatible = "hid-over-i2c";
-		interrupt-parent = <&pio>;
-		interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_irq>;
 		reg = <0x2c>;
 		hid-descr-addr = <0x0020>;
+		/*
+		 * The trackpad needs a post-power-on delay of 100ms,
+		 * but at time of writing, the power supply for it on
+		 * this board is always on. The delay is therefore not
+		 * added to avoid impacting the readiness of the
+		 * trackpad.
+		 */
+		vdd-supply = <&mt6397_vgp6_reg>;
 		wakeup-source;
+		status = "fail-needs-probe";
 	};
 };
 
@@ -68,3 +88,11 @@
 		};
 	};
 };
+
+&touchscreen {
+	status = "fail-needs-probe";
+};
+
+&trackpad {
+	status = "fail-needs-probe";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts
index e9e4ac0b74b2..2390d04204e8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts
@@ -8,6 +8,7 @@
 
 / {
 	model = "Google Elm";
+	chassis-type = "laptop";
 	compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6",
 		     "google,elm-rev5", "google,elm-rev4", "google,elm-rev3",
 		     "google,elm", "mediatek,mt8173";
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index e21feb85d822..0d995b342d46 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -58,7 +58,7 @@
 			gpios = <&pio 69 GPIO_ACTIVE_LOW>;
 			linux,code = <SW_LID>;
 			linux,input-type = <EV_SW>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		switch-power {
@@ -66,7 +66,7 @@
 			gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_POWER>;
 			debounce-interval = <30>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		switch-tablet-mode {
@@ -74,7 +74,7 @@
 			gpios = <&pio 121 GPIO_ACTIVE_HIGH>;
 			linux,code = <SW_TABLET_MODE>;
 			linux,input-type = <EV_SW>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		switch-volume-down {
@@ -90,24 +90,14 @@
 		};
 	};
 
-	panel: panel {
-		compatible = "lg,lp120up1";
-		power-supply = <&panel_fixed_3v3>;
-		backlight = <&backlight>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&ps8640_out>;
-			};
-		};
-	};
-
 	panel_fixed_3v3: regulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "PANEL_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		enable-active-high;
+		regulator-boot-on;
+		off-on-delay-us = <500000>;
 		gpio = <&pio 41 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&panel_fixed_pins>;
@@ -161,6 +151,18 @@
 			};
 		};
 	};
+
+	watchdog {
+		compatible = "arm,smc-wdt";
+	};
+};
+
+/*
+ * Disable the original MMIO watch dog and switch to the SMC watchdog, which
+ * operates on the same MMIO.
+ */
+&watchdog {
+	status = "disabled";
 };
 
 &mfg_async {
@@ -243,8 +245,7 @@
 		reg = <0x1a>;
 		avdd-supply = <&mt6397_vgp1_reg>;
 		cpvdd-supply = <&mt6397_vcama_reg>;
-		interrupt-parent = <&pio>;
-		interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+		interrupts-extended = <&pio 3 IRQ_TYPE_EDGE_BOTH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&rt5650_irq>;
 		#sound-dai-cells = <1>;
@@ -282,6 +283,20 @@
 				};
 			};
 		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "edp-panel";
+				power-supply = <&panel_fixed_3v3>;
+				backlight = <&backlight>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&ps8640_out>;
+					};
+				};
+			};
+		};
 	};
 };
 
@@ -292,8 +307,7 @@
 	da9211: da9211@68 {
 		compatible = "dlg,da9211";
 		reg = <0x68>;
-		interrupt-parent = <&pio>;
-		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
 
 		regulators {
 			da9211_vcpu_reg: BUCKA {
@@ -337,21 +351,19 @@
 	touchscreen: touchscreen@10 {
 		compatible = "elan,ekth3500";
 		reg = <0x10>;
-		interrupt-parent = <&pio>;
-		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
 &i2c4 {
 	clock-frequency = <400000>;
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&trackpad_irq>;
 
 	trackpad: trackpad@15 {
 		compatible = "elan,ekth3000";
-		interrupt-parent = <&pio>;
-		interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_irq>;
 		reg = <0x15>;
 		vcc-supply = <&mt6397_vgp6_reg>;
 		wakeup-source;
@@ -423,8 +435,7 @@
 	btmrvl: btmrvl@2 {
 		compatible = "marvell,sd8897-bt";
 		reg = <2>;
-		interrupt-parent = <&pio>;
-		interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 119 IRQ_TYPE_LEVEL_LOW>;
 		marvell,wakeup-pin = /bits/ 16 <0x0d>;
 		marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
 	};
@@ -432,8 +443,7 @@
 	mwifiex: mwifiex@1 {
 		compatible = "marvell,sd8897";
 		reg = <1>;
-		interrupt-parent = <&pio>;
-		interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 38 IRQ_TYPE_LEVEL_LOW>;
 		marvell,wakeup-pin = <3>;
 	};
 };
@@ -913,32 +923,27 @@
 };
 
 &pwrap {
-	pmic: mt6397 {
+	pmic: pmic {
 		compatible = "mediatek,mt6397";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&pio>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		clock: mt6397clock {
+		clock: clocks {
 			compatible = "mediatek,mt6397-clk";
 			#clock-cells = <1>;
 		};
 
 		pio6397: pinctrl {
 			compatible = "mediatek,mt6397-pinctrl";
-			pins-are-numbered;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		regulator: mt6397regulator {
+		regulators {
 			compatible = "mediatek,mt6397-regulator";
 
 			mt6397_vpca15_reg: buck_vpca15 {
-				regulator-compatible = "buck_vpca15";
 				regulator-name = "vpca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -948,7 +953,6 @@
 			};
 
 			mt6397_vpca7_reg: buck_vpca7 {
-				regulator-compatible = "buck_vpca7";
 				regulator-name = "vpca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -958,7 +962,6 @@
 			};
 
 			mt6397_vsramca15_reg: buck_vsramca15 {
-				regulator-compatible = "buck_vsramca15";
 				regulator-name = "vsramca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -967,7 +970,6 @@
 			};
 
 			mt6397_vsramca7_reg: buck_vsramca7 {
-				regulator-compatible = "buck_vsramca7";
 				regulator-name = "vsramca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -976,7 +978,6 @@
 			};
 
 			mt6397_vcore_reg: buck_vcore {
-				regulator-compatible = "buck_vcore";
 				regulator-name = "vcore";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -985,7 +986,6 @@
 			};
 
 			mt6397_vgpu_reg: buck_vgpu {
-				regulator-compatible = "buck_vgpu";
 				regulator-name = "vgpu";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -994,7 +994,6 @@
 			};
 
 			mt6397_vdrm_reg: buck_vdrm {
-				regulator-compatible = "buck_vdrm";
 				regulator-name = "vdrm";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1400000>;
@@ -1003,7 +1002,6 @@
 			};
 
 			mt6397_vio18_reg: buck_vio18 {
-				regulator-compatible = "buck_vio18";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1620000>;
 				regulator-max-microvolt = <1980000>;
@@ -1012,18 +1010,15 @@
 			};
 
 			mt6397_vtcxo_reg: ldo_vtcxo {
-				regulator-compatible = "ldo_vtcxo";
 				regulator-name = "vtcxo";
 				regulator-always-on;
 			};
 
 			mt6397_va28_reg: ldo_va28 {
-				regulator-compatible = "ldo_va28";
 				regulator-name = "va28";
 			};
 
 			mt6397_vcama_reg: ldo_vcama {
-				regulator-compatible = "ldo_vcama";
 				regulator-name = "vcama";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -1031,18 +1026,15 @@
 			};
 
 			mt6397_vio28_reg: ldo_vio28 {
-				regulator-compatible = "ldo_vio28";
 				regulator-name = "vio28";
 				regulator-always-on;
 			};
 
 			mt6397_vusb_reg: ldo_vusb {
-				regulator-compatible = "ldo_vusb";
 				regulator-name = "vusb";
 			};
 
 			mt6397_vmc_reg: ldo_vmc {
-				regulator-compatible = "ldo_vmc";
 				regulator-name = "vmc";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
@@ -1050,7 +1042,6 @@
 			};
 
 			mt6397_vmch_reg: ldo_vmch {
-				regulator-compatible = "ldo_vmch";
 				regulator-name = "vmch";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -1058,7 +1049,6 @@
 			};
 
 			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
-				regulator-compatible = "ldo_vemc3v3";
 				regulator-name = "vemc_3v3";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -1066,7 +1056,6 @@
 			};
 
 			mt6397_vgp1_reg: ldo_vgp1 {
-				regulator-compatible = "ldo_vgp1";
 				regulator-name = "vcamd";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -1074,7 +1063,6 @@
 			};
 
 			mt6397_vgp2_reg: ldo_vgp2 {
-				regulator-compatible = "ldo_vgp2";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -1082,7 +1070,6 @@
 			};
 
 			mt6397_vgp3_reg: ldo_vgp3 {
-				regulator-compatible = "ldo_vgp3";
 				regulator-name = "vcamaf";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -1090,7 +1077,6 @@
 			};
 
 			mt6397_vgp4_reg: ldo_vgp4 {
-				regulator-compatible = "ldo_vgp4";
 				regulator-name = "vgp4";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -1098,7 +1084,6 @@
 			};
 
 			mt6397_vgp5_reg: ldo_vgp5 {
-				regulator-compatible = "ldo_vgp5";
 				regulator-name = "vgp5";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3000000>;
@@ -1106,7 +1091,6 @@
 			};
 
 			mt6397_vgp6_reg: ldo_vgp6 {
-				regulator-compatible = "ldo_vgp6";
 				regulator-name = "vgp6";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -1115,7 +1099,6 @@
 			};
 
 			mt6397_vibr_reg: ldo_vibr {
-				regulator-compatible = "ldo_vibr";
 				regulator-name = "vibr";
 				regulator-min-microvolt = <1300000>;
 				regulator-max-microvolt = <3300000>;
@@ -1123,15 +1106,9 @@
 			};
 		};
 
-		rtc: mt6397rtc {
+		rtc: rtc {
 			compatible = "mediatek,mt6397-rtc";
 		};
-
-		syscfg_pctl_pmic: syscfg_pctl_pmic@c000 {
-			compatible = "mediatek,mt6397-pctl-pmic-syscfg",
-				     "syscon";
-			reg = <0 0x0000c000 0 0x0108>;
-		};
 	};
 };
 
@@ -1145,9 +1122,9 @@
 		compatible = "google,cros-ec-spi";
 		reg = <0x0>;
 		spi-max-frequency = <12000000>;
-		interrupt-parent = <&pio>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 0 IRQ_TYPE_LEVEL_LOW>;
 		google,cros-ec-spi-msg-delay = <500>;
+		wakeup-source;
 
 		i2c_tunnel: i2c-tunnel0 {
 			compatible = "google,cros-ec-i2c-tunnel";
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 0b5f154007be..9fffed0ef4bf 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -10,6 +10,7 @@
 
 / {
 	model = "MediaTek MT8173 evaluation board";
+	chassis-type = "embedded";
 	compatible = "mediatek,mt8173-evb", "mediatek,mt8173";
 
 	aliases {
@@ -40,10 +41,10 @@
 
 	extcon_usb: extcon_iddig {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pio 16 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb_p1_vbus: regulator@0 {
+	usb_p1_vbus: regulator-usb-p1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -52,7 +53,7 @@
 		enable-active-high;
 	};
 
-	usb_p0_vbus: regulator@1 {
+	usb_p0_vbus: regulator-usb-p0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbus";
 		regulator-min-microvolt = <5000000>;
@@ -212,14 +213,14 @@
 				 <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
 				 <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins_clk {
 			pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
 			bias-pull-down;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 		};
 
 		pins_insert {
@@ -240,13 +241,13 @@
 				 <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
 				 <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_2mA>;
+			drive-strength = <2>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
 		pins_clk {
 			pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_2mA>;
+			drive-strength = <2>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
 		};
 
@@ -264,13 +265,13 @@
 				 <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
 				 <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins_clk {
 			pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 	};
@@ -300,18 +301,16 @@
 	/* Only MT8173 E1 needs USB power domain */
 	power-domains = <&spm MT8173_POWER_DOMAIN_USB>;
 
-	pmic: mt6397 {
+	pmic: pmic {
 		compatible = "mediatek,mt6397";
-		interrupt-parent = <&pio>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		mt6397regulator: mt6397regulator {
+		regulators {
 			compatible = "mediatek,mt6397-regulator";
 
 			mt6397_vpca15_reg: buck_vpca15 {
-				regulator-compatible = "buck_vpca15";
 				regulator-name = "vpca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -320,7 +319,6 @@
 			};
 
 			mt6397_vpca7_reg: buck_vpca7 {
-				regulator-compatible = "buck_vpca7";
 				regulator-name = "vpca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -329,7 +327,6 @@
 			};
 
 			mt6397_vsramca15_reg: buck_vsramca15 {
-				regulator-compatible = "buck_vsramca15";
 				regulator-name = "vsramca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -338,7 +335,6 @@
 			};
 
 			mt6397_vsramca7_reg: buck_vsramca7 {
-				regulator-compatible = "buck_vsramca7";
 				regulator-name = "vsramca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -347,7 +343,6 @@
 			};
 
 			mt6397_vcore_reg: buck_vcore {
-				regulator-compatible = "buck_vcore";
 				regulator-name = "vcore";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -356,7 +351,6 @@
 			};
 
 			mt6397_vgpu_reg: buck_vgpu {
-				regulator-compatible = "buck_vgpu";
 				regulator-name = "vgpu";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -365,7 +359,6 @@
 			};
 
 			mt6397_vdrm_reg: buck_vdrm {
-				regulator-compatible = "buck_vdrm";
 				regulator-name = "vdrm";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1400000>;
@@ -374,7 +367,6 @@
 			};
 
 			mt6397_vio18_reg: buck_vio18 {
-				regulator-compatible = "buck_vio18";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1620000>;
 				regulator-max-microvolt = <1980000>;
@@ -383,19 +375,16 @@
 			};
 
 			mt6397_vtcxo_reg: ldo_vtcxo {
-				regulator-compatible = "ldo_vtcxo";
 				regulator-name = "vtcxo";
 				regulator-always-on;
 			};
 
 			mt6397_va28_reg: ldo_va28 {
-				regulator-compatible = "ldo_va28";
 				regulator-name = "va28";
 				regulator-always-on;
 			};
 
 			mt6397_vcama_reg: ldo_vcama {
-				regulator-compatible = "ldo_vcama";
 				regulator-name = "vcama";
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <2800000>;
@@ -403,18 +392,15 @@
 			};
 
 			mt6397_vio28_reg: ldo_vio28 {
-				regulator-compatible = "ldo_vio28";
 				regulator-name = "vio28";
 				regulator-always-on;
 			};
 
 			mt6397_vusb_reg: ldo_vusb {
-				regulator-compatible = "ldo_vusb";
 				regulator-name = "vusb";
 			};
 
 			mt6397_vmc_reg: ldo_vmc {
-				regulator-compatible = "ldo_vmc";
 				regulator-name = "vmc";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
@@ -422,7 +408,6 @@
 			};
 
 			mt6397_vmch_reg: ldo_vmch {
-				regulator-compatible = "ldo_vmch";
 				regulator-name = "vmch";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -430,7 +415,6 @@
 			};
 
 			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
-				regulator-compatible = "ldo_vemc3v3";
 				regulator-name = "vemc_3v3";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -438,7 +422,6 @@
 			};
 
 			mt6397_vgp1_reg: ldo_vgp1 {
-				regulator-compatible = "ldo_vgp1";
 				regulator-name = "vcamd";
 				regulator-min-microvolt = <1220000>;
 				regulator-max-microvolt = <3300000>;
@@ -446,7 +429,6 @@
 			};
 
 			mt6397_vgp2_reg: ldo_vgp2 {
-				regulator-compatible = "ldo_vgp2";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
@@ -454,7 +436,6 @@
 			};
 
 			mt6397_vgp3_reg: ldo_vgp3 {
-				regulator-compatible = "ldo_vgp3";
 				regulator-name = "vcamaf";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -462,7 +443,6 @@
 			};
 
 			mt6397_vgp4_reg: ldo_vgp4 {
-				regulator-compatible = "ldo_vgp4";
 				regulator-name = "vgp4";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -470,7 +450,6 @@
 			};
 
 			mt6397_vgp5_reg: ldo_vgp5 {
-				regulator-compatible = "ldo_vgp5";
 				regulator-name = "vgp5";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3000000>;
@@ -478,7 +457,6 @@
 			};
 
 			mt6397_vgp6_reg: ldo_vgp6 {
-				regulator-compatible = "ldo_vgp6";
 				regulator-name = "vgp6";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -486,7 +464,6 @@
 			};
 
 			mt6397_vibr_reg: ldo_vibr {
-				regulator-compatible = "ldo_vibr";
 				regulator-name = "vibr";
 				regulator-min-microvolt = <1300000>;
 				regulator-max-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 6d9513c1f5bf..122a57c3780b 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -222,14 +222,14 @@
 		};
 	};
 
-	pmu_a53 {
+	pmu-a53 {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	pmu_a72 {
+	pmu-a72 {
 		compatible = "arm,cortex-a72-pmu";
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 13 IRQ_TYPE_LEVEL_LOW>;
@@ -286,7 +286,7 @@
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit0 {
+				cpu_crit: cpu-crit0 {
 					temperature = <115000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -318,7 +318,15 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-		vpu_dma_reserved: vpu_dma_mem_region@b7000000 {
+
+		afe_dma_mem: audio-dma-pool {
+			compatible = "shared-dma-pool";
+			size = <0 0x100000>;
+			alignment = <0 0x10>;
+			no-map;
+		};
+
+		vpu_dma_reserved: vpu-dma-mem@b7000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0xb7000000 0 0x500000>;
 			alignment = <0x1000>;
@@ -352,21 +360,21 @@
 			#clock-cells = <1>;
 		};
 
-		infracfg: power-controller@10001000 {
+		infracfg: clock-controller@10001000 {
 			compatible = "mediatek,mt8173-infracfg", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
 
-		pericfg: power-controller@10003000 {
+		pericfg: clock-controller@10003000 {
 			compatible = "mediatek,mt8173-pericfg", "syscon";
 			reg = <0 0x10003000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
 
-		syscfg_pctl_a: syscfg_pctl_a@10005000 {
+		syscfg_pctl_a: syscon@10005000 {
 			compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon";
 			reg = <0 0x10005000 0 0x1000>;
 		};
@@ -375,7 +383,6 @@
 			compatible = "mediatek,mt8173-pinctrl";
 			reg = <0 0x1000b000 0 0x1000>;
 			mediatek,pctl-regmap = <&syscfg_pctl_a>;
-			pins-are-numbered;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -444,9 +451,8 @@
 		};
 
 		scpsys: syscon@10006000 {
-			compatible = "syscon", "simple-mfd";
+			compatible = "mediatek,mt8173-scpsys", "syscon", "simple-mfd";
 			reg = <0 0x10006000 0 0x1000>;
-			#power-domain-cells = <1>;
 
 			/* System Power Manager */
 			spm: power-controller {
@@ -566,7 +572,7 @@
 			memory-region = <&vpu_dma_reserved>;
 		};
 
-		sysirq: intpol-controller@10200620 {
+		sysirq: interrupt-controller@10200620 {
 			compatible = "mediatek,mt8173-sysirq",
 				     "mediatek,mt6577-sysirq";
 			interrupt-controller;
@@ -592,6 +598,15 @@
 			reg = <0 0x10206000 0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			socinfo-data1@40 {
+				reg = <0x040 0x4>;
+			};
+
+			socinfo-data2@44 {
+				reg = <0x044 0x4>;
+			};
+
 			thermal_calibration: calib@528 {
 				reg = <0x528 0xc>;
 			};
@@ -880,6 +895,7 @@
 					  <&topckgen CLK_TOP_AUD_2_SEL>;
 			assigned-clock-parents = <&topckgen CLK_TOP_APLL1>,
 						 <&topckgen CLK_TOP_APLL2>;
+			memory-region = <&afe_dma_mem>;
 		};
 
 		mmc0: mmc@11230000 {
@@ -1248,8 +1264,7 @@
 		};
 
 		pwm0: pwm@1401e000 {
-			compatible = "mediatek,mt8173-disp-pwm",
-				     "mediatek,mt6595-disp-pwm";
+			compatible = "mediatek,mt8173-disp-pwm";
 			reg = <0 0x1401e000 0 0x1000>;
 			#pwm-cells = <2>;
 			clocks = <&mmsys CLK_MM_DISP_PWM026M>,
@@ -1259,8 +1274,7 @@
 		};
 
 		pwm1: pwm@1401f000 {
-			compatible = "mediatek,mt8173-disp-pwm",
-				     "mediatek,mt6595-disp-pwm";
+			compatible = "mediatek,mt8173-disp-pwm";
 			reg = <0 0x1401f000 0 0x1000>;
 			#pwm-cells = <2>;
 			clocks = <&mmsys CLK_MM_DISP_PWM126M>,
@@ -1370,10 +1384,9 @@
 			#clock-cells = <1>;
 		};
 
-		vcodec_dec: vcodec@16000000 {
+		vcodec_dec: vcodec@16020000 {
 			compatible = "mediatek,mt8173-vcodec-dec";
-			reg = <0 0x16000000 0 0x100>,	/* VDEC_SYS */
-			      <0 0x16020000 0 0x1000>,	/* VDEC_MISC */
+			reg = <0 0x16020000 0 0x1000>,	/* VDEC_MISC */
 			      <0 0x16021000 0 0x800>,	/* VDEC_LD */
 			      <0 0x16021800 0 0x800>,	/* VDEC_TOP */
 			      <0 0x16022000 0 0x1000>,	/* VDEC_CM */
@@ -1384,6 +1397,8 @@
 			      <0 0x16027000 0 0x800>,	/* VDEC_HWQ */
 			      <0 0x16027800 0 0x800>,	/* VDEC_HWB */
 			      <0 0x16028400 0 0x400>;	/* VDEC_HWG */
+			reg-names = "misc", "ld", "top", "cm", "ad", "av", "pp",
+				    "hwd", "hwq", "hwb", "hwg";
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
 			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
@@ -1394,6 +1409,7 @@
 				 <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
 			mediatek,vpu = <&vpu>;
+			mediatek,vdecsys = <&vdecsys>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_VDEC>;
 			clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
 				 <&topckgen CLK_TOP_UNIVPLL_D2>,
@@ -1468,7 +1484,7 @@
 			clock-names = "venc_sel";
 			assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
 			assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>;
-			power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_VENC>;
 		};
 
 		jpegdec: jpegdec@18004000 {
@@ -1519,7 +1535,7 @@
 			assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
 			assigned-clock-parents =
 				 <&topckgen CLK_TOP_VCODECPLL_370P5>;
-			power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC_LT>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_VENC_LT>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index 52dc4a50e34d..f04baea5d6cb 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -11,6 +11,7 @@
 
 / {
 	model = "MediaTek MT8183 evaluation board";
+	chassis-type = "embedded";
 	compatible = "mediatek,mt8183-evb", "mediatek,mt8183";
 
 	aliases {
@@ -30,14 +31,14 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-		scp_mem_reserved: scp_mem_region {
+		scp_mem_reserved: memory@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
 			no-map;
 		};
 	};
 
-	ntc@0 {
+	thermal-sensor {
 		compatible = "murata,ncp03wf104";
 		pullup-uv = <1800000>;
 		pullup-ohm = <390000>;
@@ -52,7 +53,6 @@
 
 &gpu {
 	mali-supply = <&mt6358_vgpu_reg>;
-	sram-supply = <&mt6358_vsram_gpu_reg>;
 };
 
 &i2c0 {
@@ -138,63 +138,73 @@
 	non-removable;
 };
 
+&mt6358_vgpu_reg {
+	regulator-min-microvolt = <625000>;
+	regulator-max-microvolt = <900000>;
+
+	regulator-coupled-with = <&mt6358_vsram_gpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
+&mt6358_vsram_gpu_reg {
+	regulator-min-microvolt = <850000>;
+	regulator-max-microvolt = <1000000>;
+
+	regulator-coupled-with = <&mt6358_vgpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
 &pio {
-	i2c_pins_0: i2c0{
-		pins_i2c{
+	i2c_pins_0: i2c0 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
-	i2c_pins_1: i2c1{
-		pins_i2c{
+	i2c_pins_1: i2c1 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
-	i2c_pins_2: i2c2{
-		pins_i2c{
+	i2c_pins_2: i2c2 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
-	i2c_pins_3: i2c3{
-		pins_i2c{
+	i2c_pins_3: i2c3 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
-	i2c_pins_4: i2c4{
-		pins_i2c{
+	i2c_pins_4: i2c4 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
-	i2c_pins_5: i2c5{
-		pins_i2c{
+	i2c_pins_5: i2c5 {
+		pins_i2c {
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
-	spi_pins_0: spi0{
-		pins_spi{
+	spi_pins_0: spi0 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
 				 <PINMUX_GPIO86__FUNC_SPI0_CSB>,
 				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
@@ -308,8 +318,8 @@
 		};
 	};
 
-	spi_pins_1: spi1{
-		pins_spi{
+	spi_pins_1: spi1 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
 				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
 				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
@@ -318,8 +328,8 @@
 		};
 	};
 
-	spi_pins_2: spi2{
-		pins_spi{
+	spi_pins_2: spi2 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
 				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
 				 <PINMUX_GPIO2__FUNC_SPI2_CLK>,
@@ -328,8 +338,8 @@
 		};
 	};
 
-	spi_pins_3: spi3{
-		pins_spi{
+	spi_pins_3: spi3 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
 				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
 				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
@@ -338,8 +348,8 @@
 		};
 	};
 
-	spi_pins_4: spi4{
-		pins_spi{
+	spi_pins_4: spi4 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
 				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
 				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
@@ -348,8 +358,8 @@
 		};
 	};
 
-	spi_pins_5: spi5{
-		pins_spi{
+	spi_pins_5: spi5 {
+		pins_spi {
 			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
 				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
 				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
@@ -365,6 +375,10 @@
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &mfg {
 	domain-supply = <&mt6358_vgpu_reg>;
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
index 2c69e7658dba..f69ffcb9792a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
@@ -11,8 +11,7 @@
 		pinctrl-0 = <&da7219_pins>;
 		compatible = "dlg,da7219";
 		reg = <0x1a>;
-		interrupt-parent = <&pio>;
-		interrupts = <165 IRQ_TYPE_LEVEL_LOW 165 0>;
+		interrupts-extended = <&pio 165 IRQ_TYPE_LEVEL_LOW>;
 
 		dlg,micbias-lvl = <2600>;
 		dlg,mic-amp-in-sel = "diff";
@@ -28,7 +27,7 @@
 			dlg,btn-cfg = <50>;
 			dlg,mic-det-thr = <500>;
 			dlg,jack-ins-deb = <20>;
-			dlg,jack-det-rate = "32ms_64ms";
+			dlg,jack-det-rate = "32_64";
 			dlg,jack-rem-deb = <1>;
 
 			dlg,a-d-btn-thr = <0xa>;
@@ -40,8 +39,8 @@
 };
 
 &pio {
-	da7219_pins: da7219_pins {
-		pins1 {
+	da7219_pins: da7219-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO165__FUNC_GPIO165>;
 			input-enable;
 			bias-pull-up;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
index 0799c48ade19..c4aedf8cbfcd 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
@@ -11,14 +11,13 @@
 		pinctrl-0 = <&ts3a227e_pins>;
 		compatible = "ti,ts3a227e";
 		reg = <0x3b>;
-		interrupt-parent = <&pio>;
-		interrupts = <157 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 157 IRQ_TYPE_LEVEL_LOW>;
 		status = "okay";
 	};
 };
 
 &pio {
-	ts3a227e_pins: ts3a227e_pins {
+	ts3a227e_pins: ts3a227e-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO157__FUNC_GPIO157>;
 			input-enable;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
index 1a2ec0787d3c..20b71f2e7159 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google burnet board";
+	chassis-type = "convertible";
 	compatible = "google,burnet", "mediatek,mt8183";
 };
 
@@ -29,3 +30,6 @@
 	};
 };
 
+&i2c2 {
+	i2c-scl-internal-delay-ns = <4100>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
index 072133fb0f01..83bbcfe62083 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google cozmo board";
+	chassis-type = "laptop";
 	compatible = "google,cozmo", "mediatek,mt8183";
 };
 
@@ -17,6 +18,8 @@
 };
 
 &i2c2 {
+	i2c-scl-internal-delay-ns = <25000>;
+
 	trackpad@2c {
 		compatible = "hid-over-i2c";
 		reg = <0x2c>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
index 0eca3ff8672a..7bc7c2687d6f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
@@ -9,24 +9,28 @@
 
 / {
 	model = "Google damu board";
+	chassis-type = "convertible";
 	compatible = "google,damu", "mediatek,mt8183";
 };
 
 &touchscreen {
-	status = "okay";
+	compatible = "elan,ekth6a12nay";
 
-	compatible = "hid-over-i2c";
-	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
-	post-power-on-delay-ms = <10>;
-	hid-descr-addr = <0x0001>;
+	vcc33-supply = <&pp3300_alw>;
+	vccio-supply = <&pp1800_alw>;
+};
+
+&mt6358codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
 };
 
 &qca_wifi {
 	qcom,ath10k-calibration-variant = "GO_DAMU";
 };
 
+&i2c2 {
+	i2c-scl-internal-delay-ns = <20000>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
index dec11a4eb59e..863f3e403de8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
@@ -9,11 +9,12 @@
 
 / {
 	model = "Google fennel sku1 board";
+	chassis-type = "convertible";
 	compatible = "google,fennel-sku1", "google,fennel", "mediatek,mt8183";
 
 	pwmleds {
 		compatible = "pwm-leds";
-		keyboard_backlight: keyboard-backlight {
+		keyboard_backlight: led-0 {
 			label = "cros_ec::kbd_backlight";
 			pwms = <&cros_ec_pwm 0>;
 			max-brightness = <1023>;
@@ -26,17 +27,12 @@
 };
 
 &touchscreen {
-	status = "okay";
+	compatible = "elan,ekth6a12nay";
 
-	compatible = "hid-over-i2c";
-	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
-	post-power-on-delay-ms = <10>;
-	hid-descr-addr = <0x0001>;
+	vcc33-supply = <&pp3300_alw>;
 };
 
 &qca_wifi {
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
index 37e6e58f63b7..e0a583ce4a0b 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
@@ -9,21 +9,17 @@
 
 / {
 	model = "Google fennel sku6 board";
+	chassis-type = "convertible";
 	compatible = "google,fennel-sku6", "google,fennel", "mediatek,mt8183";
 };
 
 &touchscreen {
-	status = "okay";
+	compatible = "elan,ekth6a12nay";
 
-	compatible = "hid-over-i2c";
-	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
-	post-power-on-delay-ms = <10>;
-	hid-descr-addr = <0x0001>;
+	vcc33-supply = <&pp3300_alw>;
 };
 
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
index 0e09604004d5..7874c9a20e12 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
@@ -9,21 +9,17 @@
 
 / {
 	model = "Google fennel sku7 board";
+	chassis-type = "convertible";
 	compatible = "google,fennel-sku7", "google,fennel", "mediatek,mt8183";
 };
 
 &touchscreen {
-	status = "okay";
+	compatible = "elan,ekth6a12nay";
 
-	compatible = "hid-over-i2c";
-	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
-	post-power-on-delay-ms = <10>;
-	hid-descr-addr = <0x0001>;
+	vcc33-supply = <&pp3300_alw>;
 };
 
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
index bbe6c338f465..f9c1ec366b26 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
@@ -25,3 +25,6 @@
 	};
 };
 
+&i2c2 {
+	i2c-scl-internal-delay-ns = <21500>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts
index 3fc5a6181d7e..877256eab262 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google fennel14 sku2 board";
+	chassis-type = "laptop";
 	compatible = "google,fennel-sku2", "google,fennel", "mediatek,mt8183";
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts
index 23ad0b91e977..b981dd31a430 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google fennel14 sku0 board";
+	chassis-type = "laptop";
 	compatible = "google,fennel-sku0", "google,fennel", "mediatek,mt8183";
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts
index bc2c57f0a827..8ac6bf5b17f9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google juniper sku16 board";
+	chassis-type = "convertible";
 	compatible = "google,juniper-sku16", "google,juniper", "mediatek,mt8183";
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts
index e5bd9191e426..f3ac9c074226 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google kappa board";
+	chassis-type = "laptop";
 	compatible = "google,kappa", "mediatek,mt8183";
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
index 8fa89db03e63..561770fcf69e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
@@ -9,5 +9,21 @@
 
 / {
 	model = "Google kenzo sku17 board";
+	chassis-type = "laptop";
 	compatible = "google,juniper-sku17", "google,juniper", "mediatek,mt8183";
 };
+
+&i2c0 {
+	touchscreen@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <70>;
+		hid-descr-addr = <0x0001>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts
new file mode 100644
index 000000000000..ddb993521bbf
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "Google makomo sku0 board";
+	chassis-type = "laptop";
+	compatible = "google,makomo-sku0", "google,makomo", "mediatek,mt8183";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <6>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts
new file mode 100644
index 000000000000..10c4f920a7d8
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-rt1015p.dtsi"
+
+/ {
+	model = "Google makomo sku1 board";
+	chassis-type = "laptop";
+	compatible = "google,makomo-sku1", "google,makomo", "mediatek,mt8183";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <6>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts
new file mode 100644
index 000000000000..8ce9568fee95
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google pico board";
+	chassis-type = "convertible";
+	compatible = "google,pico-sku1", "google,pico", "mediatek,mt8183";
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&i2c2 {
+	i2c-scl-internal-delay-ns = <25000>;
+
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
new file mode 100644
index 000000000000..cce326aec1aa
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google pico6 board";
+	chassis-type = "convertible";
+	compatible = "google,pico-sku2", "google,pico", "mediatek,mt8183";
+
+	bt_wakeup: bt-wakeup {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins_wakeup>;
+
+		event-wobt {
+			label = "Wake on BT";
+			gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&i2c2 {
+	i2c-scl-internal-delay-ns = <25000>;
+
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
+&wifi_wakeup_event {
+	gpios = <&pio 113 GPIO_ACTIVE_LOW>;
+};
+
+&wifi_pwrseq {
+	post-power-on-delay-ms = <50>;
+
+	/* Toggle WIFI_ENABLE to reset the chip. */
+	reset-gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+};
+
+&wifi_pins_pwrseq {
+	pins-wifi-enable {
+		pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
+	};
+};
+
+&mmc1_pins_default {
+	pins-cmd-dat {
+		drive-strength = <6>;
+	};
+	pins-clk {
+		drive-strength = <6>;
+	};
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <6>;
+	};
+};
+
+&mmc1 {
+	bluetooth@2 {
+		reg = <2>;
+		compatible = "mediatek,mt7921s-bluetooth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins_reset>;
+		reset-gpios = <&pio 120 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pio {
+	bt_pins_wakeup: bt-pins-wakeup {
+		piins-bt-wakeup {
+			pinmux = <PINMUX_GPIO42__FUNC_GPIO42>;
+			input-enable;
+		};
+	};
+
+	bt_pins_reset: bt-pins-reset {
+		pins-bt-reset {
+			pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
+			output-high;
+		};
+	};
+};
+
+/delete-node/ &bluetooth;
+/delete-node/ &bt_pins;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts
index 89208b843b27..928b205a616a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google willow board sku0";
+	chassis-type = "laptop";
 	compatible = "google,willow-sku0", "google,willow", "mediatek,mt8183";
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts
index c7b20441d053..71307a8052d6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts
@@ -9,5 +9,6 @@
 
 / {
 	model = "Google willow board sku1";
+	chassis-type = "laptop";
 	compatible = "google,willow-sku1", "google,willow", "mediatek,mt8183";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
index 76d33540166f..c942e461a177 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
@@ -6,6 +6,21 @@
 /dts-v1/;
 #include "mt8183-kukui-jacuzzi.dtsi"
 
+&i2c0 {
+	touchscreen@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <70>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
 &i2c2 {
 	trackpad@2c {
 		compatible = "hid-over-i2c";
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 3ac83be53627..1b74ec171c10 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -4,49 +4,41 @@
  */
 
 #include "mt8183-kukui.dtsi"
+/* Must come after mt8183-kukui.dtsi to modify cros_ec */
+#include <arm/cros-ec-keyboard.dtsi>
 
 / {
-	panel: panel {
-		compatible = "auo,b116xw03";
-		power-supply = <&pp3300_panel>;
-		backlight = <&backlight_lcd0>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&anx7625_out>;
-			};
-		};
-	};
-
-	pp1200_mipibrdg: pp1200-mipibrdg {
+	pp1000_mipibrdg: pp1000-mipibrdg {
 		compatible = "regulator-fixed";
-		regulator-name = "pp1200_mipibrdg";
+		regulator-name = "pp1000_mipibrdg";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pp1200_mipibrdg_en>;
+		pinctrl-0 = <&pp1000_mipibrdg_en>;
 
 		enable-active-high;
 		regulator-boot-on;
 
 		gpio = <&pio 54 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp1800_alw>;
 	};
 
 	pp1800_mipibrdg: pp1800-mipibrdg {
 		compatible = "regulator-fixed";
 		regulator-name = "pp1800_mipibrdg";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pp1800_lcd_en>;
+		pinctrl-0 = <&pp1800_mipibrdg_en>;
 
 		enable-active-high;
 		regulator-boot-on;
 
 		gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp1800_alw>;
 	};
 
 	pp3300_panel: pp3300-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "pp3300_panel";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pp3300_panel_pins>;
 
@@ -54,18 +46,20 @@
 		regulator-boot-on;
 
 		gpio = <&pio 35 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_alw>;
 	};
 
-	vddio_mipibrdg: vddio-mipibrdg {
+	pp3300_mipibrdg: pp3300-mipibrdg {
 		compatible = "regulator-fixed";
-		regulator-name = "vddio_mipibrdg";
+		regulator-name = "pp3300_mipibrdg";
 		pinctrl-names = "default";
-		pinctrl-0 = <&vddio_mipibrdg_en>;
+		pinctrl-0 = <&pp3300_mipibrdg_en>;
 
 		enable-active-high;
 		regulator-boot-on;
 
 		gpio = <&pio 37 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_alw>;
 	};
 
 	volume_buttons: volume-buttons {
@@ -99,16 +93,8 @@
 	};
 };
 
-&dsi0 {
-	status = "okay";
-	/delete-node/panel@0;
-	ports {
-		port {
-			dsi_out: endpoint {
-				remote-endpoint = <&anx7625_in>;
-			};
-		};
-	};
+&dsi_out {
+	remote-endpoint = <&anx7625_in>;
 };
 
 &i2c0 {
@@ -157,28 +143,44 @@
 		reg = <0x58>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&anx7625_pins>;
-		panel_flags = <1>;
 		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
-		vdd10-supply = <&pp1200_mipibrdg>;
+		vdd10-supply = <&pp1000_mipibrdg>;
 		vdd18-supply = <&pp1800_mipibrdg>;
-		vdd33-supply = <&vddio_mipibrdg>;
+		vdd33-supply = <&pp3300_mipibrdg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
 
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
+			port@0 {
+				reg = <0>;
 
-			anx7625_in: endpoint {
-				remote-endpoint = <&dsi_out>;
+				anx7625_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
 			};
-		};
 
-		port@1 {
-			reg = <1>;
+			port@1 {
+				reg = <1>;
+
+				anx7625_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
 
-			anx7625_out: endpoint {
-				remote-endpoint = <&panel_in>;
+		aux-bus {
+			panel: panel {
+				compatible = "edp-panel";
+				power-supply = <&pp3300_panel>;
+				backlight = <&backlight_lcd0>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&anx7625_out>;
+					};
+				};
 			};
 		};
 	};
@@ -388,14 +390,14 @@
 		"",
 		"";
 
-	pp1200_mipibrdg_en: pp1200-mipibrdg-en {
+	pp1000_mipibrdg_en: pp1000-mipibrdg-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
 			output-low;
 		};
 	};
 
-	pp1800_lcd_en: pp1800-lcd-en {
+	pp1800_mipibrdg_en: pp1800-mipibrdg-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
@@ -403,20 +405,20 @@
 	};
 
 	pp3300_panel_pins: pp3300-panel-pins {
-		panel_3v3_enable: panel-3v3-enable {
+		panel_3v3_enable: pins-panel-en {
 			pinmux = <PINMUX_GPIO35__FUNC_GPIO35>;
 			output-low;
 		};
 	};
 
-	ppvarp_lcd_en: ppvarp-lcd-en {
+	ppvarp_lcd_en: ppvarp-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
 			output-low;
 		};
 	};
 
-	ppvarn_lcd_en: ppvarn-lcd-en {
+	ppvarn_lcd_en: ppvarn-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
 			output-low;
@@ -437,27 +439,27 @@
 	};
 
 	touchscreen_pins: touchscreen-pins {
-		touch_int_odl {
+		pins-intn {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		touch_rst_l {
+		pins-rst {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 			output-high;
 		};
 	};
 
 	trackpad_pins: trackpad-pins {
-		trackpad_int {
+		pins-intn {
 			pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
 			input-enable;
 			bias-disable; /* pulled externally */
 		};
 	};
 
-	vddio_mipibrdg_en: vddio-mipibrdg-en {
+	pp3300_mipibrdg_en: pp3300-mipibrdg-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
 			output-low;
@@ -465,13 +467,13 @@
 	};
 
 	volume_button_pins: volume-button-pins {
-		voldn-btn-odl {
+		pins-voldn {
 			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		volup-btn-odl {
+		pins-volup {
 			pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
 			input-enable;
 			bias-pull-up;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
index 3a724e6f915c..1ecf39458d93 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
@@ -9,10 +9,29 @@
 
 / {
 	model = "MediaTek kakadu board sku22";
+	chassis-type = "tablet";
 	compatible = "google,kakadu-rev3-sku22", "google,kakadu-rev2-sku22",
 		     "google,kakadu", "mediatek,mt8183";
 };
 
+&i2c0 {
+	touchscreen: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&panel {
+	compatible = "boe,tv105wum-nw0";
+};
+
 &sound {
 	compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
index 89a139a0ee44..ba74109a4909 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
@@ -9,6 +9,25 @@
 
 / {
 	model = "MediaTek kakadu board";
+	chassis-type = "tablet";
 	compatible = "google,kakadu-rev3", "google,kakadu-rev2",
 			"google,kakadu", "mediatek,mt8183";
 };
+
+&i2c0 {
+	touchscreen: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&panel {
+	compatible = "boe,tv105wum-nw0";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
index 50a0dd36b5fb..d71972c94e42 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -61,21 +61,35 @@
 	firmware-name = "nvm_00440302_i2s_eu.bin";
 };
 
-&i2c0 {
-	status = "okay";
-
-	touchscreen: touchscreen@10 {
-		compatible = "hid-over-i2c";
-		reg = <0x10>;
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&open_touch>;
+		pinctrl-0 = <&panel_pins_default>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		backlight = <&backlight_lcd0>;
+		rotation = <270>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
 
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
 
-		post-power-on-delay-ms = <10>;
-		hid-descr-addr = <0x0001>;
-	};
+&i2c0 {
+	status = "okay";
 };
 
 &mt6358_vcama2_reg {
@@ -105,9 +119,9 @@
 	clock-frequency = <400000>;
 	vbus-supply = <&mt6358_vcn18_reg>;
 
-	eeprom@54 {
+	eeprom@50 {
 		compatible = "atmel,24c32";
-		reg = <0x54>;
+		reg = <0x50>;
 		pagesize = <32>;
 		vcc-supply = <&mt6358_vcn18_reg>;
 	};
@@ -317,35 +331,35 @@
 		"",
 		"";
 
-	ppvarp_lcd_en: ppvarp-lcd-en {
+	ppvarp_lcd_en: ppvarp-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
 			output-low;
 		};
 	};
 
-	ppvarn_lcd_en: ppvarn-lcd-en {
+	ppvarn_lcd_en: ppvarn-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
 			output-low;
 		};
 	};
 
-	pp1800_lcd_en: pp1800-lcd-en {
+	pp1800_lcd_en: pp1800-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
 		};
 	};
 
-	open_touch: open_touch {
-		irq_pin {
+	open_touch: opentouch-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		rst_pin {
+		pins-rst {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 
 			/*
@@ -362,8 +376,8 @@
 		};
 	};
 
-	pen_eject: peneject {
-		pen_eject {
+	pen_eject: pen-pins {
+		pins-eject {
 			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
 			input-enable;
 			/* External pull-up. */
@@ -372,11 +386,21 @@
 	};
 };
 
+&cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
+
 &qca_wifi {
 	qcom,ath10k-calibration-variant = "GO_KAKADU";
 };
 
 &panel {
 	status = "okay";
-	compatible = "boe,tv105wum-nw0";
+	/* compatible will be set in board dts */
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts
new file mode 100644
index 000000000000..2b5a8d1f900e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "Google katsu board";
+	chassis-type = "tablet";
+	compatible = "google,katsu-sku32", "google,katsu", "mediatek,mt8183";
+};
+
+&i2c0 {
+	touchscreen1: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&pp3300_alw>;
+	};
+};
+
+&panel {
+	compatible = "starry,2081101qfh032011-53g";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_KATSU";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts
new file mode 100644
index 000000000000..75fadf2c7059
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-rt1015p.dtsi"
+
+/ {
+	model = "Google katsu sku38 board";
+	chassis-type = "tablet";
+	compatible = "google,katsu-sku38", "google,katsu", "mediatek,mt8183";
+};
+
+&i2c0 {
+	touchscreen1: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&pp3300_alw>;
+	};
+};
+
+&panel {
+	compatible = "starry,2081101qfh032011-53g";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_KATSU";
+};
+
+&sound {
+	compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts
index e3dd75bdaea4..7213cdcca612 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts
@@ -12,6 +12,7 @@
 
 / {
 	model = "MediaTek kodama sku16 board";
+	chassis-type = "tablet";
 	compatible = "google,kodama-sku16", "google,kodama", "mediatek,mt8183";
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts
index d81935ae07bc..bbf0cd1aa66d 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts
@@ -12,6 +12,7 @@
 
 / {
 	model = "MediaTek kodama sku272 board";
+	chassis-type = "tablet";
 	compatible = "google,kodama-sku272", "google,kodama", "mediatek,mt8183";
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts
index f4082fbe0517..a429ffeac3bd 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts
@@ -12,6 +12,7 @@
 
 / {
 	model = "MediaTek kodama sku288 board";
+	chassis-type = "tablet";
 	compatible = "google,kodama-sku288", "google,kodama", "mediatek,mt8183";
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts
index 7739358008ee..5a416143b4a0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts
@@ -12,6 +12,7 @@
 
 / {
 	model = "MediaTek kodama sku32 board";
+	chassis-type = "tablet";
 	compatible = "google,kodama-sku32", "google,kodama", "mediatek,mt8183";
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
index 06f8c80bf553..b702ff066636 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
@@ -42,14 +42,41 @@
 	};
 };
 
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pins_default>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		backlight = <&backlight_lcd0>;
+		rotation = <270>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
+
 &i2c0 {
 	status = "okay";
 
 	touchscreen: touchscreen@10 {
 		compatible = "hid-over-i2c";
 		reg = <0x10>;
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&touch_default>;
 
@@ -80,9 +107,9 @@
 	clock-frequency = <400000>;
 	vbus-supply = <&mt6358_vcn18_reg>;
 
-	eeprom@54 {
+	eeprom@50 {
 		compatible = "atmel,24c64";
-		reg = <0x54>;
+		reg = <0x50>;
 		pagesize = <32>;
 		vcc-supply = <&mt6358_vcn18_reg>;
 	};
@@ -293,35 +320,35 @@
 		"",
 		"";
 
-	ppvarp_lcd_en: ppvarp-lcd-en {
+	ppvarp_lcd_en: ppvarp-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
 			output-low;
 		};
 	};
 
-	ppvarn_lcd_en: ppvarn-lcd-en {
+	ppvarn_lcd_en: ppvarn-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
 			output-low;
 		};
 	};
 
-	pp1800_lcd_en: pp1800-lcd-en {
+	pp1800_lcd_en: pp1800-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
 		};
 	};
 
-	touch_default: touchdefault {
-		pin_irq {
+	touch_default: touch-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		touch_pin_reset: pin_reset {
+		touch_pin_reset: pins-rst {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 
 			/*
@@ -339,6 +366,16 @@
 	};
 };
 
+&cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
+
 &qca_wifi {
 	qcom,ath10k-calibration-variant = "GO_KODAMA";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
index fb5ee91b6fe0..4ac75806fa94 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
@@ -14,6 +14,7 @@
 
 / {
 	model = "MediaTek krane sku0 board";
+	chassis-type = "tablet";
 	compatible = "google,krane-sku0", "google,krane", "mediatek,mt8183";
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
index 721d16f9c3b4..095279e55d50 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
@@ -14,6 +14,7 @@
 
 / {
 	model = "MediaTek krane sku176 board";
+	chassis-type = "tablet";
 	compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
index a7b0cb3ff7b0..b6cfcafd8b06 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
@@ -45,6 +45,34 @@
 	firmware-name = "nvm_00440302_i2s_eu.bin";
 };
 
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pins_default>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		backlight = <&backlight_lcd0>;
+		rotation = <270>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -54,8 +82,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&open_touch>;
 
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
 
 		post-power-on-delay-ms = <10>;
 		hid-descr-addr = <0x0001>;
@@ -89,9 +116,9 @@
 	clock-frequency = <400000>;
 	vbus-supply = <&mt6358_vcn18_reg>;
 
-	eeprom@54 {
+	eeprom@50 {
 		compatible = "atmel,24c32";
-		reg = <0x54>;
+		reg = <0x50>;
 		pagesize = <32>;
 		vcc-supply = <&mt6358_vcn18_reg>;
 	};
@@ -297,35 +324,35 @@
 		"",
 		"";
 
-	ppvarp_lcd_en: ppvarp-lcd-en {
+	ppvarp_lcd_en: ppvarp-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
 			output-low;
 		};
 	};
 
-	ppvarn_lcd_en: ppvarn-lcd-en {
+	ppvarn_lcd_en: ppvarn-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
 			output-low;
 		};
 	};
 
-	pp1800_lcd_en: pp1800-lcd-en {
+	pp1800_lcd_en: pp1800-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
 		};
 	};
 
-	open_touch: open_touch {
-		irq_pin {
+	open_touch: opentouch-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		rst_pin {
+		pins-rst {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 
 			/*
@@ -343,6 +370,16 @@
 	};
 };
 
+&cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
+
 &qca_wifi {
 	qcom,ath10k-calibration-variant = "LE_Krane";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index b4b86bb1f1a7..4b87d4940c8c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -24,7 +24,7 @@
 	backlight_lcd0: backlight_lcd0 {
 		compatible = "pwm-backlight";
 		pwms = <&pwm0 0 500000>;
-		power-supply = <&bl_pp5000>;
+		power-supply = <&reg_vsys>;
 		enable-gpios = <&pio 176 0>;
 		brightness-levels = <0 1023>;
 		num-interpolated-steps = <1023>;
@@ -47,42 +47,9 @@
 	it6505_pp18_reg: regulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "it6505_pp18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
 		gpio = <&pio 178 0>;
 		enable-active-high;
-	};
-
-	lcd_pp3300: regulator1 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd_pp3300";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	bl_pp5000: regulator2 {
-		compatible = "regulator-fixed";
-		regulator-name = "bl_pp5000";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	mmc1_fixed_power: regulator3 {
-		compatible = "regulator-fixed";
-		regulator-name = "mmc1_power";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	mmc1_fixed_io: regulator4 {
-		compatible = "regulator-fixed";
-		regulator-name = "mmc1_io";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+		vin-supply = <&pp1800_alw>;
 	};
 
 	pp1800_alw: regulator5 {
@@ -92,6 +59,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_vsys>;
 	};
 
 	pp3300_alw: regulator6 {
@@ -101,6 +69,15 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vsys>;
+	};
+
+	/* system wide semi-regulated power rail from charger */
+	reg_vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
 	};
 
 	reserved_memory: reserved-memory {
@@ -108,7 +85,14 @@
 		#size-cells = <2>;
 		ranges;
 
-		scp_mem_reserved: scp_mem_region {
+		afe_dma_mem: audio-dma-pool {
+			compatible = "shared-dma-pool";
+			size = <0 0x100000>;
+			alignment = <0 0x10>;
+			no-map;
+		};
+
+		scp_mem_reserved: memory@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
 			no-map;
@@ -128,6 +112,7 @@
 
 	btsco: bt-sco {
 		compatible = "linux,bt-sco";
+		#sound-dai-cells = <0>;
 	};
 
 	wifi_pwrseq: wifi-pwrseq {
@@ -144,7 +129,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&wifi_pins_wakeup>;
 
-		button-wowlan {
+		wifi_wakeup_event: event-wowlan {
 			label = "Wake on WiFi";
 			gpios = <&pio 113 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
@@ -222,8 +207,7 @@
 };
 
 &afe {
-	i2s3-share = "I2S2";
-	i2s0-share = "I2S5";
+	memory-region = <&afe_dma_mem>;
 };
 
 &auxadc {
@@ -268,38 +252,14 @@
 
 &dsi0 {
 	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	panel: panel@0 {
-		/* compatible will be set in board dts */
-		reg = <0>;
-		enable-gpios = <&pio 45 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_pins_default>;
-		avdd-supply = <&ppvarn_lcd>;
-		avee-supply = <&ppvarp_lcd>;
-		pp1800-supply = <&pp1800_lcd>;
-		backlight = <&backlight_lcd0>;
-		rotation = <270>;
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dsi_out>;
-			};
-		};
-	};
+};
 
-	ports {
-		port {
-			dsi_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
+&gic {
+	mediatek,broken-save-restore-fw;
 };
 
 &gpu {
 	mali-supply = <&mt6358_vgpu_reg>;
-	sram-supply = <&mt6358_vsram_gpu_reg>;
 };
 
 &i2c0 {
@@ -373,12 +333,11 @@
 	pinctrl-names = "default", "state_uhs";
 	pinctrl-0 = <&mmc1_pins_default>;
 	pinctrl-1 = <&mmc1_pins_uhs>;
-	vmmc-supply = <&mmc1_fixed_power>;
-	vqmmc-supply = <&mmc1_fixed_io>;
+	vmmc-supply = <&pp3300_alw>;
+	vqmmc-supply = <&pp1800_alw>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
 	max-frequency = <200000000>;
-	drv-type = <2>;
 	cap-sd-highspeed;
 	sd-uhs-sdr50;
 	sd-uhs-sdr104;
@@ -407,6 +366,33 @@
 	Avdd-supply = <&mt6358_vaud28_reg>;
 };
 
+&mt6358regulator {
+	vsys-ldo1-supply = <&reg_vsys>;
+	vsys-ldo2-supply = <&reg_vsys>;
+	vsys-ldo3-supply = <&reg_vsys>;
+	vsys-vcore-supply = <&reg_vsys>;
+	vsys-vdram1-supply = <&reg_vsys>;
+	vsys-vgpu-supply = <&reg_vsys>;
+	vsys-vmodem-supply = <&reg_vsys>;
+	vsys-vpa-supply = <&reg_vsys>;
+	vsys-vproc11-supply = <&reg_vsys>;
+	vsys-vproc12-supply = <&reg_vsys>;
+	vsys-vs1-supply = <&reg_vsys>;
+	vsys-vs2-supply = <&reg_vsys>;
+	vs1-ldo1-supply = <&mt6358_vs1_reg>;
+	vs2-ldo1-supply = <&mt6358_vdram1_reg>;
+	vs2-ldo2-supply = <&mt6358_vs2_reg>;
+	vs2-ldo3-supply = <&mt6358_vs2_reg>;
+	vs2-ldo4-supply = <&mt6358_vs2_reg>;
+};
+
+&mt6358_vgpu_reg {
+	regulator-max-microvolt = <900000>;
+
+	regulator-coupled-with = <&mt6358_vsram_gpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
 &mt6358_vsim1_reg {
 	regulator-min-microvolt = <2700000>;
 	regulator-max-microvolt = <2700000>;
@@ -417,9 +403,17 @@
 	regulator-max-microvolt = <2700000>;
 };
 
+&mt6358_vsram_gpu_reg {
+	regulator-min-microvolt = <850000>;
+	regulator-max-microvolt = <1000000>;
+
+	regulator-coupled-with = <&mt6358_vgpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
 &pio {
-	aud_pins_default: audiopins {
-		pins_bus {
+	aud_pins_default: audio-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO97__FUNC_I2S2_MCK>,
 				<PINMUX_GPIO98__FUNC_I2S2_BCK>,
 				<PINMUX_GPIO101__FUNC_I2S2_LRCK>,
@@ -440,20 +434,20 @@
 		};
 	};
 
-	aud_pins_tdm_out_on: audiotdmouton {
-		pins_bus {
+	aud_pins_tdm_out_on: audio-tdmout-on-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO169__FUNC_TDM_BCK_2ND>,
 				<PINMUX_GPIO170__FUNC_TDM_LRCK_2ND>,
 				<PINMUX_GPIO171__FUNC_TDM_DATA0_2ND>,
 				<PINMUX_GPIO172__FUNC_TDM_DATA1_2ND>,
 				<PINMUX_GPIO173__FUNC_TDM_DATA2_2ND>,
 				<PINMUX_GPIO10__FUNC_TDM_DATA3>; /*8ch-i2s to it6505*/
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 		};
 	};
 
-	aud_pins_tdm_out_off: audiotdmoutoff {
-		pins_bus {
+	aud_pins_tdm_out_off: audio-tdmout-off-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO169__FUNC_GPIO169>,
 				<PINMUX_GPIO170__FUNC_GPIO170>,
 				<PINMUX_GPIO171__FUNC_GPIO171>,
@@ -462,96 +456,90 @@
 				<PINMUX_GPIO10__FUNC_GPIO10>;
 			input-enable;
 			bias-pull-down;
-			drive-strength = <MTK_DRIVE_2mA>;
+			drive-strength = <2>;
 		};
 	};
 
 	bt_pins: bt-pins {
-		pins_bt_en {
+		pins-bt-en {
 			pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
 			output-low;
 		};
 	};
 
-	ec_ap_int_odl: ec_ap_int_odl {
-		pins1 {
+	ec_ap_int_odl: ec-ap-int-odl-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO151__FUNC_GPIO151>;
 			input-enable;
 			bias-pull-up;
 		};
 	};
 
-	h1_int_od_l: h1_int_od_l {
-		pins1 {
+	h1_int_od_l: h1-int-od-l-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
 			input-enable;
 		};
 	};
 
-	i2c0_pins: i2c0 {
-		pins_bus {
+	i2c0_pins: i2c0-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
-	i2c1_pins: i2c1 {
-		pins_bus {
+	i2c1_pins: i2c1-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
-	i2c2_pins: i2c2 {
-		pins_bus {
+	i2c2_pins: i2c2-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			bias-disable;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
-	i2c3_pins: i2c3 {
-		pins_bus {
+	i2c3_pins: i2c3-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
-	i2c4_pins: i2c4 {
-		pins_bus {
+	i2c4_pins: i2c4-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			bias-disable;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
-	i2c5_pins: i2c5 {
-		pins_bus {
+	i2c5_pins: i2c5-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
-	i2c6_pins: i2c6 {
-		pins_bus {
+	i2c6_pins: i2c6-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO11__FUNC_SCL6>,
 				 <PINMUX_GPIO12__FUNC_SDA6>;
 			bias-disable;
 		};
 	};
 
-	mmc0_pins_default: mmc0-pins-default {
-		pins_cmd_dat {
+	mmc0_pins_default: mmc0-default-pins {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
 				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
@@ -566,13 +554,13 @@
 			mediatek,pull-up-adv = <01>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
-		pins_rst {
+		pins-rst {
 			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-down-adv = <01>;
@@ -580,7 +568,7 @@
 	};
 
 	mmc0_pins_uhs: mmc0-pins-uhs {
-		pins_cmd_dat {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
 				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
@@ -595,72 +583,72 @@
 			mediatek,pull-up-adv = <01>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
-		pins_ds {
+		pins-ds {
 			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
-		pins_rst {
+		pins-rst {
 			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-up-adv = <01>;
 		};
 	};
 
-	mmc1_pins_default: mmc1-pins-default {
-		pins_cmd_dat {
+	mmc1_pins_default: mmc1-default-pins {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
 				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
 				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
 			input-enable;
-			mediatek,pull-up-adv = <10>;
+			mediatek,pull-up-adv = <2>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			input-enable;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 	};
 
-	mmc1_pins_uhs: mmc1-pins-uhs {
-		pins_cmd_dat {
+	mmc1_pins_uhs: mmc1-uhs-pins {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
 				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
 				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			input-enable;
-			mediatek,pull-up-adv = <10>;
+			mediatek,pull-up-adv = <2>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
-			mediatek,pull-down-adv = <10>;
+			drive-strength = <8>;
+			mediatek,pull-down-adv = <2>;
 			input-enable;
 		};
 	};
 
-	panel_pins_default: panel_pins_default {
-		panel_reset {
+	panel_pins_default: panel-pins {
+		pins-panel-reset {
 			pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
 			output-low;
 			bias-pull-up;
 		};
 	};
 
-	pwm0_pin_default: pwm0_pin_default {
+	pwm0_pin_default: pwm0-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
 			output-high;
@@ -671,15 +659,15 @@
 		};
 	};
 
-	scp_pins: scp {
-		pins_scp_uart {
+	scp_pins: scp-pins {
+		pins-scp-uart {
 			pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>,
 				 <PINMUX_GPIO112__FUNC_TP_UTXD1_AO>;
 		};
 	};
 
-	spi0_pins: spi0 {
-		pins_spi{
+	spi0_pins: spi0-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
 				 <PINMUX_GPIO86__FUNC_GPIO86>,
 				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
@@ -688,8 +676,8 @@
 		};
 	};
 
-	spi1_pins: spi1 {
-		pins_spi{
+	spi1_pins: spi1-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
 				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
 				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
@@ -698,21 +686,21 @@
 		};
 	};
 
-	spi2_pins: spi2 {
-		pins_spi{
+	spi2_pins: spi2-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
 				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
 				 <PINMUX_GPIO2__FUNC_SPI2_CLK>;
 			bias-disable;
 		};
-		pins_spi_mi {
+		pins-miso {
 			pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>;
 			mediatek,pull-down-adv = <00>;
 		};
 	};
 
-	spi3_pins: spi3 {
-		pins_spi{
+	spi3_pins: spi3-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
 				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
 				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
@@ -721,8 +709,8 @@
 		};
 	};
 
-	spi4_pins: spi4 {
-		pins_spi{
+	spi4_pins: spi4-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
 				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
 				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
@@ -731,8 +719,8 @@
 		};
 	};
 
-	spi5_pins: spi5 {
-		pins_spi{
+	spi5_pins: spi5-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
 				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
 				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
@@ -741,70 +729,72 @@
 		};
 	};
 
-	uart0_pins_default: uart0-pins-default {
-		pins_rx {
+	uart0_pins_default: uart0-pins {
+		pins-rx {
 			pinmux = <PINMUX_GPIO95__FUNC_URXD0>;
 			input-enable;
 			bias-pull-up;
 		};
-		pins_tx {
+		pins-tx {
 			pinmux = <PINMUX_GPIO96__FUNC_UTXD0>;
 		};
 	};
 
-	uart1_pins_default: uart1-pins-default {
-		pins_rx {
+	uart1_pins_default: uart1-pins {
+		pins-rx {
 			pinmux = <PINMUX_GPIO121__FUNC_URXD1>;
 			input-enable;
 			bias-pull-up;
 		};
-		pins_tx {
+		pins-tx {
 			pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
 		};
-		pins_rts {
+		pins-rts {
 			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
-			output-enable;
 		};
-		pins_cts {
+		pins-cts {
 			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
 			input-enable;
 		};
 	};
 
-	uart1_pins_sleep: uart1-pins-sleep {
-		pins_rx {
+	uart1_pins_sleep: uart1-sleep-pins {
+		pins-rx {
 			pinmux = <PINMUX_GPIO121__FUNC_GPIO121>;
 			input-enable;
 			bias-pull-up;
 		};
-		pins_tx {
+		pins-tx {
 			pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
 		};
-		pins_rts {
+		pins-rts {
 			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
-			output-enable;
 		};
-		pins_cts {
+		pins-cts {
 			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
 			input-enable;
 		};
 	};
 
-	wifi_pins_pwrseq: wifi-pins-pwrseq {
-		pins_wifi_enable {
+	wifi_pins_pwrseq: wifi-pwr-pins {
+		pins-wifi-enable {
 			pinmux = <PINMUX_GPIO119__FUNC_GPIO119>;
 			output-low;
 		};
 	};
 
-	wifi_pins_wakeup: wifi-pins-wakeup {
-		pins_wifi_wakeup {
+	wifi_pins_wakeup: wifi-wake-pins {
+		pins-wifi-wakeup {
 			pinmux = <PINMUX_GPIO113__FUNC_GPIO113>;
 			input-enable;
 		};
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &pwm0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -813,10 +803,12 @@
 
 &scp {
 	status = "okay";
+
+	firmware-name = "mediatek/mt8183/scp.img";
 	pinctrl-names = "default";
 	pinctrl-0 = <&scp_pins>;
 
-	cros_ec {
+	cros-ec-rpmsg {
 		compatible = "google,cros-ec-rpmsg";
 		mediatek,rpmsg-name = "cros-ec-rpmsg";
 	};
@@ -830,10 +822,6 @@
 	domain-supply = <&mt6358_vgpu_reg>;
 };
 
-&soc_data {
-	status = "okay";
-};
-
 &spi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
@@ -841,14 +829,13 @@
 	status = "okay";
 	cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>;
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&h1_int_od_l>;
-		interrupt-parent = <&pio>;
-		interrupts = <153 IRQ_TYPE_EDGE_RISING>;
+		interrupts-extended = <&pio 153 IRQ_TYPE_EDGE_RISING>;
 	};
 };
 
@@ -875,10 +862,10 @@
 		compatible = "google,cros-ec-spi";
 		reg = <0>;
 		spi-max-frequency = <3000000>;
-		interrupt-parent = <&pio>;
-		interrupts = <151 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 151 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ec_ap_int_odl>;
+		wakeup-source;
 
 		i2c_tunnel: i2c-tunnel {
 			compatible = "google,cros-ec-i2c-tunnel";
@@ -892,10 +879,6 @@
 			google,usb-port-id = <0>;
 		};
 
-		cbas {
-			compatible = "google,cros-cbas";
-		};
-
 		typec {
 			compatible = "google,cros-ec-typec";
 			#address-cells = <1>;
@@ -941,13 +924,13 @@
 };
 
 &thermal_zones {
-	tboard1 {
+	tboard1-thermal {
 		polling-delay = <1000>; /* milliseconds */
 		polling-delay-passive = <0>; /* milliseconds */
 		thermal-sensors = <&tboard_thermistor1>;
 	};
 
-	tboard2 {
+	tboard2-thermal {
 		polling-delay = <1000>; /* milliseconds */
 		polling-delay-passive = <0>; /* milliseconds */
 		thermal-sensors = <&tboard_thermistor2>;
@@ -969,6 +952,7 @@
 	pinctrl-0 = <&uart1_pins_default>;
 	pinctrl-1 = <&uart1_pins_sleep>;
 	status = "okay";
+	/delete-property/ interrupts;
 	interrupts-extended = <&sysirq GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>,
 			      <&pio 121 IRQ_TYPE_EDGE_FALLING>;
 
@@ -995,5 +979,4 @@
 	};
 };
 
-#include <arm/cros-ec-keyboard.dtsi>
 #include <arm/cros-ec-sbs.dtsi>
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
index 530e0c9ce0c9..f60ef3e53a09 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include "mt8183.dtsi"
 #include "mt6358.dtsi"
 
@@ -32,7 +33,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		scp_mem_reserved: scp_mem_region@50000000 {
+		scp_mem_reserved: scp-mem@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
 			no-map;
@@ -62,6 +63,18 @@
 		pulldown-ohm = <0>;
 		io-channels = <&auxadc 0>;
 	};
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_connector_out>;
+			};
+		};
+	};
 };
 
 &auxadc {
@@ -70,7 +83,6 @@
 
 &gpu {
 	mali-supply = <&mt6358_vgpu_reg>;
-	sram-supply = <&mt6358_vsram_gpu_reg>;
 };
 
 &i2c0 {
@@ -120,6 +132,55 @@
 	pinctrl-0 = <&i2c6_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	it66121hdmitx: hdmitx@4c {
+		compatible = "ite,it66121";
+		reg = <0x4c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ite_pins>;
+		reset-gpios = <&pio 160 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&pio>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		vcn33-supply = <&mt6358_vcn33_reg>;
+		vcn18-supply = <&mt6358_vcn18_reg>;
+		vrf12-supply = <&mt6358_vrf12_reg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				it66121_in: endpoint {
+					bus-width = <12>;
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hdmi_connector_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&keyboard {
+	pinctrl-names = "default";
+	pinctrl-0 = <&keyboard_pins>;
+	status = "okay";
+	linux,keymap = <MATRIX_KEY(0x00, 0x00, KEY_VOLUMEDOWN)
+			MATRIX_KEY(0x01, 0x00, KEY_VOLUMEUP)>;
+	keypad,num-rows = <2>;
+	keypad,num-columns = <1>;
+	debounce-delay-ms = <32>;
+	mediatek,keys-per-group = <2>;
 };
 
 &mmc0 {
@@ -163,58 +224,68 @@
 	non-removable;
 };
 
+&mt6358_vgpu_reg {
+	regulator-min-microvolt = <625000>;
+	regulator-max-microvolt = <900000>;
+
+	regulator-coupled-with = <&mt6358_vsram_gpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
+&mt6358_vsram_gpu_reg {
+	regulator-min-microvolt = <850000>;
+	regulator-max-microvolt = <1000000>;
+
+	regulator-coupled-with = <&mt6358_vgpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
 &pio {
 	i2c_pins_0: i2c0 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
 	i2c_pins_1: i2c1 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
 	i2c_pins_2: i2c2 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
 	i2c_pins_3: i2c3 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
 	i2c_pins_4: i2c4 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
 	i2c_pins_5: i2c5 {
-		pins_i2c{
+		pins_i2c {
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -226,6 +297,14 @@
 		};
 	};
 
+	keyboard_pins: keyboard {
+		pins_keyboard {
+			pinmux = <PINMUX_GPIO91__FUNC_KPROW1>,
+				 <PINMUX_GPIO92__FUNC_KPROW0>,
+				 <PINMUX_GPIO93__FUNC_KPCOL0>;
+		};
+	};
+
 	mmc0_pins_default: mmc0-pins-default {
 		pins_cmd_dat {
 			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
@@ -245,7 +324,7 @@
 		pins_clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins_rst {
@@ -274,13 +353,13 @@
 		pins_clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins_ds {
 			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins_rst {
@@ -298,13 +377,13 @@
 				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
 			input-enable;
-			mediatek,pull-up-adv = <10>;
+			mediatek,pull-up-adv = <2>;
 		};
 
 		pins_clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			input-enable;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins_pmu {
@@ -320,24 +399,93 @@
 				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
 				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			input-enable;
-			mediatek,pull-up-adv = <10>;
+			mediatek,pull-up-adv = <2>;
 		};
 
 		pins_clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
-			mediatek,pull-down-adv = <10>;
+			drive-strength = <8>;
+			mediatek,pull-down-adv = <2>;
+			input-enable;
+		};
+	};
+
+	ite_pins: ite-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO4__FUNC_GPIO4>;
 			input-enable;
+			bias-pull-up;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO160__FUNC_GPIO160>;
+			output-high;
+		};
+	};
+
+	dpi_func_pins: dpi-func-pins {
+		pins-dpi {
+			pinmux = <PINMUX_GPIO12__FUNC_I2S5_BCK>,
+				 <PINMUX_GPIO46__FUNC_I2S5_LRCK>,
+				 <PINMUX_GPIO47__FUNC_I2S5_DO>,
+				 <PINMUX_GPIO13__FUNC_DBPI_D0>,
+				 <PINMUX_GPIO14__FUNC_DBPI_D1>,
+				 <PINMUX_GPIO15__FUNC_DBPI_D2>,
+				 <PINMUX_GPIO16__FUNC_DBPI_D3>,
+				 <PINMUX_GPIO17__FUNC_DBPI_D4>,
+				 <PINMUX_GPIO18__FUNC_DBPI_D5>,
+				 <PINMUX_GPIO19__FUNC_DBPI_D6>,
+				 <PINMUX_GPIO20__FUNC_DBPI_D7>,
+				 <PINMUX_GPIO21__FUNC_DBPI_D8>,
+				 <PINMUX_GPIO22__FUNC_DBPI_D9>,
+				 <PINMUX_GPIO23__FUNC_DBPI_D10>,
+				 <PINMUX_GPIO24__FUNC_DBPI_D11>,
+				 <PINMUX_GPIO25__FUNC_DBPI_HSYNC>,
+				 <PINMUX_GPIO26__FUNC_DBPI_VSYNC>,
+				 <PINMUX_GPIO27__FUNC_DBPI_DE>,
+				 <PINMUX_GPIO28__FUNC_DBPI_CK>;
+		};
+	};
+
+	dpi_idle_pins: dpi-idle-pins {
+		pins-idle {
+			pinmux = <PINMUX_GPIO12__FUNC_GPIO12>,
+				 <PINMUX_GPIO46__FUNC_GPIO46>,
+				 <PINMUX_GPIO47__FUNC_GPIO47>,
+				 <PINMUX_GPIO13__FUNC_GPIO13>,
+				 <PINMUX_GPIO14__FUNC_GPIO14>,
+				 <PINMUX_GPIO15__FUNC_GPIO15>,
+				 <PINMUX_GPIO16__FUNC_GPIO16>,
+				 <PINMUX_GPIO17__FUNC_GPIO17>,
+				 <PINMUX_GPIO18__FUNC_GPIO18>,
+				 <PINMUX_GPIO19__FUNC_GPIO19>,
+				 <PINMUX_GPIO20__FUNC_GPIO20>,
+				 <PINMUX_GPIO21__FUNC_GPIO21>,
+				 <PINMUX_GPIO22__FUNC_GPIO22>,
+				 <PINMUX_GPIO23__FUNC_GPIO23>,
+				 <PINMUX_GPIO24__FUNC_GPIO24>,
+				 <PINMUX_GPIO25__FUNC_GPIO25>,
+				 <PINMUX_GPIO26__FUNC_GPIO26>,
+				 <PINMUX_GPIO27__FUNC_GPIO27>,
+				 <PINMUX_GPIO28__FUNC_GPIO28>;
 		};
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &mfg {
 	domain-supply = <&mt6358_vgpu_reg>;
 };
 
+&cci {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
 &cpu0 {
 	proc-supply = <&mt6358_vproc12_reg>;
 };
@@ -378,6 +526,13 @@
 	status = "okay";
 };
 
-&dsi0 {
-	status = "disabled";
+&dpi0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dpi_func_pins>;
+	pinctrl-1 = <&dpi_idle_pins>;
+	status = "okay";
+};
+
+&dpi_out {
+	remote-endpoint = <&it66121_in>;
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 9d32871973a2..960d8955d018 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -336,6 +336,13 @@
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster0_opp>;
 			dynamic-power-coefficient = <84>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 			mediatek,cci = <&cci>;
 		};
@@ -352,6 +359,13 @@
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster0_opp>;
 			dynamic-power-coefficient = <84>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 			mediatek,cci = <&cci>;
 		};
@@ -368,6 +382,13 @@
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster0_opp>;
 			dynamic-power-coefficient = <84>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 			mediatek,cci = <&cci>;
 		};
@@ -384,6 +405,13 @@
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster0_opp>;
 			dynamic-power-coefficient = <84>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 			mediatek,cci = <&cci>;
 		};
@@ -400,6 +428,13 @@
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster1_opp>;
 			dynamic-power-coefficient = <211>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 			mediatek,cci = <&cci>;
 		};
@@ -416,6 +451,13 @@
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster1_opp>;
 			dynamic-power-coefficient = <211>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 			mediatek,cci = <&cci>;
 		};
@@ -432,6 +474,13 @@
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster1_opp>;
 			dynamic-power-coefficient = <211>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 			mediatek,cci = <&cci>;
 		};
@@ -448,6 +497,13 @@
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster1_opp>;
 			dynamic-power-coefficient = <211>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 			mediatek,cci = <&cci>;
 		};
@@ -481,6 +537,24 @@
 				min-residency-us = <1300>;
 			};
 		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-unified;
+		};
 	};
 
 	gpu_opp_table: opp-table-0 {
@@ -489,82 +563,82 @@
 
 		opp-300000000 {
 			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <625000>, <850000>;
+			opp-microvolt = <625000>;
 		};
 
 		opp-320000000 {
 			opp-hz = /bits/ 64 <320000000>;
-			opp-microvolt = <631250>, <850000>;
+			opp-microvolt = <631250>;
 		};
 
 		opp-340000000 {
 			opp-hz = /bits/ 64 <340000000>;
-			opp-microvolt = <637500>, <850000>;
+			opp-microvolt = <637500>;
 		};
 
 		opp-360000000 {
 			opp-hz = /bits/ 64 <360000000>;
-			opp-microvolt = <643750>, <850000>;
+			opp-microvolt = <643750>;
 		};
 
 		opp-380000000 {
 			opp-hz = /bits/ 64 <380000000>;
-			opp-microvolt = <650000>, <850000>;
+			opp-microvolt = <650000>;
 		};
 
 		opp-400000000 {
 			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <656250>, <850000>;
+			opp-microvolt = <656250>;
 		};
 
 		opp-420000000 {
 			opp-hz = /bits/ 64 <420000000>;
-			opp-microvolt = <662500>, <850000>;
+			opp-microvolt = <662500>;
 		};
 
 		opp-460000000 {
 			opp-hz = /bits/ 64 <460000000>;
-			opp-microvolt = <675000>, <850000>;
+			opp-microvolt = <675000>;
 		};
 
 		opp-500000000 {
 			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <687500>, <850000>;
+			opp-microvolt = <687500>;
 		};
 
 		opp-540000000 {
 			opp-hz = /bits/ 64 <540000000>;
-			opp-microvolt = <700000>, <850000>;
+			opp-microvolt = <700000>;
 		};
 
 		opp-580000000 {
 			opp-hz = /bits/ 64 <580000000>;
-			opp-microvolt = <712500>, <850000>;
+			opp-microvolt = <712500>;
 		};
 
 		opp-620000000 {
 			opp-hz = /bits/ 64 <620000000>;
-			opp-microvolt = <725000>, <850000>;
+			opp-microvolt = <725000>;
 		};
 
 		opp-653000000 {
 			opp-hz = /bits/ 64 <653000000>;
-			opp-microvolt = <743750>, <850000>;
+			opp-microvolt = <743750>;
 		};
 
 		opp-698000000 {
 			opp-hz = /bits/ 64 <698000000>;
-			opp-microvolt = <768750>, <868750>;
+			opp-microvolt = <768750>;
 		};
 
 		opp-743000000 {
 			opp-hz = /bits/ 64 <743000000>;
-			opp-microvolt = <793750>, <893750>;
+			opp-microvolt = <793750>;
 		};
 
 		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <825000>, <925000>;
+			opp-microvolt = <825000>;
 		};
 	};
 
@@ -585,6 +659,15 @@
 		method = "smc";
 	};
 
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
+	};
+
 	clk26m: oscillator {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -761,9 +844,8 @@
 		};
 
 		scpsys: syscon@10006000 {
-			compatible = "syscon", "simple-mfd";
+			compatible = "mediatek,mt8183-scpsys", "syscon", "simple-mfd";
 			reg = <0 0x10006000 0 0x1000>;
-			#power-domain-cells = <1>;
 
 			/* System Power Manager */
 			spm: power-controller {
@@ -790,8 +872,6 @@
 
 				mfg_async: power-domain@MT8183_POWER_DOMAIN_MFG_ASYNC {
 					reg = <MT8183_POWER_DOMAIN_MFG_ASYNC>;
-					clocks = <&topckgen CLK_TOP_MUX_MFG>;
-					clock-names = "mfg";
 					#address-cells = <1>;
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
@@ -943,6 +1023,16 @@
 			clock-names = "spi", "wrap";
 		};
 
+		keyboard: keyboard@10010000 {
+			compatible = "mediatek,mt8183-keypad",
+				     "mediatek,mt6779-keypad";
+			reg = <0 0x10010000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clk26m>;
+			clock-names = "kpd";
+			status = "disabled";
+		};
+
 		scp: scp@10500000 {
 			compatible = "mediatek,mt8183-scp";
 			reg = <0 0x10500000 0 0x80000>,
@@ -960,8 +1050,7 @@
 				     "mediatek,mt6765-timer";
 			reg = <0 0x10017000 0 0x1000>;
 			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&topckgen CLK_TOP_CLK13M>;
-			clock-names = "clk13m";
+			clocks = <&clk13m>;
 		};
 
 		iommu: iommu@10205000 {
@@ -1093,22 +1182,10 @@
 			status = "disabled";
 		};
 
-		svs: svs@1100b000 {
-			compatible = "mediatek,mt8183-svs";
-			reg = <0 0x1100b000 0 0x1000>;
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&infracfg CLK_INFRA_THERM>;
-			clock-names = "main";
-			nvmem-cells = <&svs_calibration>,
-				      <&thermal_calibration>;
-			nvmem-cell-names = "svs-calibration-data",
-					   "t-calibration-data";
-		};
-
-		thermal: thermal@1100b000 {
+		thermal: thermal-sensor@1100b000 {
 			#thermal-sensor-cells = <1>;
 			compatible = "mediatek,mt8183-thermal";
-			reg = <0 0x1100b000 0 0x1000>;
+			reg = <0 0x1100b000 0 0xc00>;
 			clocks = <&infracfg CLK_INFRA_THERM>,
 				 <&infracfg CLK_INFRA_AUXADC>;
 			clock-names = "therm", "auxadc";
@@ -1120,125 +1197,16 @@
 			nvmem-cell-names = "calibration-data";
 		};
 
-		thermal_zones: thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay-passive = <100>;
-				polling-delay = <500>;
-				thermal-sensors = <&thermal 0>;
-				sustainable-power = <5000>;
-
-				trips {
-					threshold: trip-point0 {
-						temperature = <68000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-
-					target: trip-point1 {
-						temperature = <80000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-
-					cpu_crit: cpu-crit {
-						temperature = <115000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&target>;
-						cooling-device = <&cpu0
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu1
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu2
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu3
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-						contribution = <3072>;
-					};
-					map1 {
-						trip = <&target>;
-						cooling-device = <&cpu4
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu5
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu6
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu7
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-						contribution = <1024>;
-					};
-				};
-			};
-
-			/* The tzts1 ~ tzts6 don't need to polling */
-			/* The tzts1 ~ tzts6 don't need to thermal throttle */
-
-			tzts1: tzts1 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 1>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts2: tzts2 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 2>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts3: tzts3 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 3>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts4: tzts4 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 4>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts5: tzts5 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 5>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tztsABB: tztsABB {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 6>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8183-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>,
+				      <&thermal_calibration>;
+			nvmem-cell-names = "svs-calibration-data",
+					   "t-calibration-data";
 		};
 
 		pwm0: pwm@1100e000 {
@@ -1616,6 +1584,15 @@
 			reg = <0 0x11f10000 0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			socinfo-data1@4c {
+				reg = <0x04c 0x4>;
+			};
+
+			socinfo-data2@60 {
+				reg = <0x060 0x4>;
+			};
+
 			thermal_calibration: calib@180 {
 				reg = <0x180 0xc>;
 			};
@@ -1659,10 +1636,11 @@
 			compatible = "mediatek,mt8183-mfgcfg", "syscon";
 			reg = <0 0x13000000 0 0x1000>;
 			#clock-cells = <1>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_MFG_ASYNC>;
 		};
 
 		gpu: gpu@13040000 {
-			compatible = "mediatek,mt8183-mali", "arm,mali-bifrost";
+			compatible = "mediatek,mt8183b-mali", "arm,mali-bifrost";
 			reg = <0 0x13040000 0 0x4000>;
 			interrupts =
 				<GIC_SPI 280 IRQ_TYPE_LEVEL_LOW>,
@@ -1670,7 +1648,7 @@
 				<GIC_SPI 278 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-names = "job", "mmu", "gpu";
 
-			clocks = <&topckgen CLK_TOP_MFGPLL_CK>;
+			clocks = <&mfgcfg CLK_MFG_BG3D>;
 
 			power-domains =
 				<&spm MT8183_POWER_DOMAIN_MFG_CORE0>,
@@ -1689,6 +1667,77 @@
 			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
 				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mmsys_ep_main: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&ovl0_in>;
+				};
+
+				mmsys_ep_ext: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&ovl_2l1_in>;
+				};
+			};
+		};
+
+		dma-controller0@14001000 {
+			compatible = "mediatek,mt8183-mdp3-rdma";
+			reg = <0 0x14001000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
+					      <CMDQ_EVENT_MDP_RDMA0_EOF>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+				 <&mmsys CLK_MM_MDP_RSZ1>;
+			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
+			mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
+				 <&gce 21 CMDQ_THR_PRIO_LOWEST 0>;
+			#dma-cells = <1>;
+		};
+
+		mdp3-rsz0@14003000 {
+			compatible = "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14003000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ0_SOF>,
+					      <CMDQ_EVENT_MDP_RSZ0_EOF>;
+			clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+		};
+
+		mdp3-rsz1@14004000 {
+			compatible = "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14004000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ1_SOF>,
+					      <CMDQ_EVENT_MDP_RSZ1_EOF>;
+			clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+		};
+
+		dma-controller@14005000 {
+			compatible = "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14005000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
+					      <CMDQ_EVENT_MDP_WROT0_EOF>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_MDP_WROT0>;
+			iommus = <&iommu M4U_PORT_MDP_WROT0>;
+			#dma-cells = <1>;
+		};
+
+		mdp3-wdma@14006000 {
+			compatible = "mediatek,mt8183-mdp3-wdma";
+			reg = <0 0x14006000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_WDMA0_SOF>,
+					      <CMDQ_EVENT_MDP_WDMA0_EOF>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_MDP_WDMA0>;
+			iommus = <&iommu M4U_PORT_MDP_WDMA0>;
 		};
 
 		ovl0: ovl@14008000 {
@@ -1699,6 +1748,25 @@
 			clocks = <&mmsys CLK_MM_DISP_OVL0>;
 			iommus = <&iommu M4U_PORT_DISP_OVL0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ovl0_in: endpoint {
+						remote-endpoint = <&mmsys_ep_main>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ovl0_out: endpoint {
+						remote-endpoint = <&ovl_2l0_in>;
+					};
+				};
+			};
 		};
 
 		ovl_2l0: ovl@14009000 {
@@ -1709,6 +1777,25 @@
 			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
 			iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ovl_2l0_in: endpoint {
+						remote-endpoint = <&ovl0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ovl_2l0_out: endpoint {
+						remote-endpoint = <&rdma0_in>;
+					};
+				};
+			};
 		};
 
 		ovl_2l1: ovl@1400a000 {
@@ -1719,6 +1806,25 @@
 			clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
 			iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ovl_2l1_in: endpoint {
+						remote-endpoint = <&mmsys_ep_ext>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ovl_2l1_out: endpoint {
+						remote-endpoint = <&rdma1_in>;
+					};
+				};
+			};
 		};
 
 		rdma0: rdma@1400b000 {
@@ -1730,6 +1836,25 @@
 			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
 			mediatek,rdma-fifo-size = <5120>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					rdma0_in: endpoint {
+						remote-endpoint = <&ovl_2l0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					rdma0_out: endpoint {
+						remote-endpoint = <&color0_in>;
+					};
+				};
+			};
 		};
 
 		rdma1: rdma@1400c000 {
@@ -1741,6 +1866,25 @@
 			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
 			mediatek,rdma-fifo-size = <2048>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					rdma1_in: endpoint {
+						remote-endpoint = <&ovl_2l1_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					rdma1_out: endpoint {
+						remote-endpoint = <&dpi_in>;
+					};
+				};
+			};
 		};
 
 		color0: color@1400e000 {
@@ -1751,6 +1895,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					color0_in: endpoint {
+						remote-endpoint = <&rdma0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					color0_out: endpoint {
+						remote-endpoint = <&ccorr0_in>;
+					};
+				};
+			};
 		};
 
 		ccorr0: ccorr@1400f000 {
@@ -1760,6 +1923,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_CCORR0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ccorr0_in: endpoint {
+						remote-endpoint = <&color0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ccorr0_out: endpoint {
+						remote-endpoint = <&aal0_in>;
+					};
+				};
+			};
 		};
 
 		aal0: aal@14010000 {
@@ -1769,6 +1951,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_AAL0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					aal0_in: endpoint {
+						remote-endpoint = <&ccorr0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					aal0_out: endpoint {
+						remote-endpoint = <&gamma0_in>;
+					};
+				};
+			};
 		};
 
 		gamma0: gamma@14011000 {
@@ -1778,6 +1979,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					gamma0_in: endpoint {
+						remote-endpoint = <&aal0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					gamma0_out: endpoint {
+						remote-endpoint = <&dither0_in>;
+					};
+				};
+			};
 		};
 
 		dither0: dither@14012000 {
@@ -1787,6 +2007,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dither0_in: endpoint {
+						remote-endpoint = <&gamma0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dither0_out: endpoint {
+						remote-endpoint = <&dsi_in>;
+					};
+				};
+			};
 		};
 
 		dsi0: dsi@14014000 {
@@ -1801,6 +2040,53 @@
 			resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
 			phys = <&mipi_tx0>;
 			phy-names = "dphy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi_in: endpoint {
+						remote-endpoint = <&dither0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dsi_out: endpoint { };
+				};
+			};
+		};
+
+		dpi0: dpi@14015000 {
+			compatible = "mediatek,mt8183-dpi";
+			reg = <0 0x14015000 0 0x1000>;
+			interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DPI_IF>,
+				 <&mmsys CLK_MM_DPI_MM>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL>;
+			clock-names = "pixel", "engine", "pll";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dpi_in: endpoint {
+						remote-endpoint = <&rdma1_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dpi_out: endpoint { };
+				};
+			};
 		};
 
 		mutex: mutex@14016000 {
@@ -1834,6 +2120,15 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 		};
 
+		mdp3-ccorr@1401c000 {
+			compatible = "mediatek,mt8183-mdp3-ccorr";
+			reg = <0 0x1401c000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_CCORR_SOF>,
+					      <CMDQ_EVENT_MDP_CCORR_EOF>;
+			clocks = <&mmsys CLK_MM_MDP_CCORR>;
+		};
+
 		imgsys: syscon@15020000 {
 			compatible = "mediatek,mt8183-imgsys", "syscon";
 			reg = <0 0x15020000 0 0x1000>;
@@ -1866,6 +2161,36 @@
 			#clock-cells = <1>;
 		};
 
+		vcodec_dec: video-codec@16020000 {
+			compatible = "mediatek,mt8183-vcodec-dec";
+			reg = <0 0x16020000 0 0x1000>,		/* VDEC_MISC */
+			      <0 0x16021000 0 0x800>,		/* VDEC_VLD */
+			      <0 0x16021800 0 0x800>,		/* VDEC_TOP */
+			      <0 0x16022000 0 0x1000>,		/* VDEC_MC */
+			      <0 0x16023000 0 0x1000>,		/* VDEC_AVCVLD */
+			      <0 0x16024000 0 0x1000>,		/* VDEC_AVCMV */
+			      <0 0x16025000 0 0x1000>,		/* VDEC_PP */
+			      <0 0x16026800 0 0x800>,		/* VP8_VD */
+			      <0 0x16027000 0 0x800>,		/* VP6_VD */
+			      <0 0x16027800 0 0x800>,		/* VP8_VL */
+			      <0 0x16028400 0 0x400>;		/* VP9_VD */
+			reg-names = "misc", "ld", "top", "cm", "ad", "av", "pp",
+				    "hwd", "hwq", "hwb", "hwg";
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PPWRAP_EXT>;
+			mediatek,scp = <&scp>;
+			mediatek,vdecsys = <&vdecsys>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_VDEC>;
+			clocks = <&vdecsys CLK_VDEC_VDEC>;
+			clock-names = "vdec";
+		};
+
 		larb1: larb@16010000 {
 			compatible = "mediatek,mt8183-smi-larb";
 			reg = <0 0x16010000 0 0x1000>;
@@ -1891,7 +2216,24 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_VENC>;
 		};
 
-		venc_jpg: venc_jpg@17030000 {
+		vcodec_enc: vcodec@17020000 {
+			compatible = "mediatek,mt8183-vcodec-enc";
+			reg = <0 0x17020000 0 0x1000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_VENC_REC>,
+				 <&iommu M4U_PORT_VENC_BSDMA>,
+				 <&iommu M4U_PORT_VENC_RD_COMV>,
+				 <&iommu M4U_PORT_VENC_CUR_LUMA>,
+				 <&iommu M4U_PORT_VENC_CUR_CHROMA>,
+				 <&iommu M4U_PORT_VENC_REF_LUMA>,
+				 <&iommu M4U_PORT_VENC_REF_CHROMA>;
+			mediatek,scp = <&scp>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_VENC>;
+			clocks = <&vencsys CLK_VENC_VENC>;
+			clock-names = "venc_sel";
+		};
+
+		venc_jpg: jpeg-encoder@17030000 {
 			compatible = "mediatek,mt8183-jpgenc", "mediatek,mtk-jpgenc";
 			reg = <0 0x17030000 0 0x1000>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>;
@@ -1952,4 +2294,193 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_CAM>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <500>;
+			thermal-sensors = <&thermal 0>;
+			sustainable-power = <5000>;
+
+			trips {
+				threshold: trip-point0 {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point1 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu1
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu2
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu3
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+					contribution = <3072>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&cpu4
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu5
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu6
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu7
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+					contribution = <1024>;
+				};
+			};
+		};
+
+		tzts1: soc-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&thermal 1>;
+			sustainable-power = <5000>;
+			trips {
+				soc_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		tzts2: gpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&thermal 2>;
+			sustainable-power = <5000>;
+
+			trips {
+				gpu_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		tzts3: md1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&thermal 3>;
+			sustainable-power = <5000>;
+
+			trips {
+				md1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		tzts4: cpu-little-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&thermal 4>;
+			sustainable-power = <5000>;
+
+			trips {
+				cpul_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpul_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		tzts5: cpu-big-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&thermal 5>;
+			sustainable-power = <5000>;
+
+			trips {
+				cpub_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpub_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		tztsABB: tsabb-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&thermal 6>;
+			sustainable-power = <5000>;
+
+			trips {
+				tsabb_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				tsabb_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku0.dts
new file mode 100644
index 000000000000..5d012bc4ff0d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku0.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-chinchou.dtsi"
+
+/ {
+	model = "Google chinchou CZ1104CM2A/CZ1204CM2A";
+	compatible = "google,chinchou-sku0", "google,chinchou-sku2",
+			"google,chinchou-sku4", "google,chinchou-sku5",
+			"google,chinchou", "mediatek,mt8186";
+};
+
+&gpio_keys {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku1.dts
new file mode 100644
index 000000000000..9d6e62af6944
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku1.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-chinchou.dtsi"
+
+/ {
+	model = "Google chinchou CZ1104FM2A/CZ1204FM2A/CZ1104CM2A/CZ1204CM2A";
+	compatible = "google,chinchou-sku1", "google,chinchou-sku3",
+			"google,chinchou-sku6", "google,chinchou-sku7",
+			"google,chinchou-sku17", "google,chinchou-sku20",
+			"google,chinchou-sku22", "google,chinchou-sku23",
+			"google,chinchou", "mediatek,mt8186";
+};
+
+&gpio_keys {
+	status = "disabled";
+};
+
+&i2c1 {
+	i2c-scl-internal-delay-ns = <10000>;
+
+	touchscreen: touchscreen@41 {
+		compatible = "ilitek,ili2901";
+		reg = <0x41>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vccio-supply = <&pp1800_tchscr_report_disable>;
+		vcc33-supply = <&pp3300_z2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku16.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku16.dts
new file mode 100644
index 000000000000..eb377de1fcde
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku16.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-chinchou.dtsi"
+
+/ {
+	model = "Google chinchou CZ1104FM2A/CZ1204FM2A";
+	compatible = "google,chinchou-sku16", "google,chinchou-sku18",
+			"google,chinchou-sku19", "google,chinchou-sku21",
+			"google,chinchou", "mediatek,mt8186";
+};
+
+&i2c1 {
+	i2c-scl-internal-delay-ns = <10000>;
+
+	touchscreen: touchscreen@41 {
+		compatible = "ilitek,ili2901";
+		reg = <0x41>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vccio-supply = <&pp1800_tchscr_report_disable>;
+		vcc33-supply = <&pp3300_z2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou.dtsi
new file mode 100644
index 000000000000..800792157021
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou.dtsi
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola.dtsi"
+
+/ {
+	/delete-node/ speaker-codec;
+
+	pp1000_edpbrdg: regulator-pp1000-edpbrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1000_edpbrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp1000_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 29 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	pp1800_edpbrdg_dx: regulator-pp1800-edpbrdg-dx {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_edpbrdg_dx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp1800_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 30 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6366_vio18_reg>;
+	};
+
+	pp3300_edp_dx: regulator-pp3300-edp-dx {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_edp_dx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 31 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	pp1800_tchscr_report_disable: regulator-pp1800-tchscr-report-disable {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_tchscr_report_disable";
+		pinctrl-names = "default";
+		regulator-boot-on;
+		pinctrl-0 = <&touch_pin_report>;
+		gpio = <&pio 37 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&anx7625_in>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	anx_bridge: anx7625@58 {
+		compatible = "analogix,anx7625";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&anx7625_pins>;
+		enable-gpios = <&pio 96 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+		vdd10-supply = <&pp1000_edpbrdg>;
+		vdd18-supply = <&pp1800_edpbrdg_dx>;
+		vdd33-supply = <&pp3300_edp_dx>;
+		analogix,lane0-swing = /bits/ 8 <0x70 0x30>;
+		analogix,lane1-swing = /bits/ 8 <0x70 0x30>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				anx7625_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+					data-lanes = <0 1 2 3>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				anx7625_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "edp-panel";
+				power-supply = <&pp3300_disp_x>;
+				backlight = <&backlight_lcd0>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&anx7625_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	/delete-node/ trackpad@15;
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+		vdd-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+	/delete-node/ codec@1a;
+
+	rt5650: rt5650@1a {
+		compatible = "realtek,rt5650";
+		reg = <0x1a>;
+		avdd-supply = <&mt6366_vio18_reg>;
+		cpvdd-supply = <&mt6366_vio18_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&speaker_codec_pins_default>;
+		cbj-sleeve-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&pio>;
+		interrupts = <17 IRQ_TYPE_EDGE_BOTH>;
+		#sound-dai-cells = <0>;
+		realtek,dmic1-data-pin = <2>;
+		realtek,jd-mode = <2>;
+	};
+};
+
+&i2c_tunnel {
+	/delete-node/ sbs-battery@b;
+
+	battery: sbs-battery@f {
+		compatible = "sbs,sbs-battery";
+		reg = <0xf>;
+		sbs,i2c-retry-count = <2>;
+		sbs,poll-retry-count = <1>;
+	};
+};
+
+&keyboard_controller {
+	keypad,num-columns = <15>;
+
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)        /* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)        /* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)        /* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)        /* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)        /* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)        /* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)        /* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)        /* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)        /* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)        /* T10 */
+		MATRIX_KEY(0x00, 0x01, 0)        /* T11 */
+		MATRIX_KEY(0x01, 0x05, 0)        /* T12 */
+	>;
+
+	linux,keymap = <
+		CROS_STD_MAIN_KEYMAP
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)           /* T1 */
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)        /* T2 */
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)           /* T3 */
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)          /* T4 */
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)          /* T5 */
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) /* T6 */
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)   /* T7 */
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)           /* T8 */
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)	   /* T9 */
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)	   /* T10 */
+		MATRIX_KEY(0x00, 0x01, KEY_MICMUTE)        /* T11 */
+		MATRIX_KEY(0x01, 0x05, KEY_CONTROLPANEL)   /* T12 */
+		MATRIX_KEY(0x03, 0x05, KEY_PREVIOUSSONG)   /* T13 */
+		MATRIX_KEY(0x00, 0x09, KEY_PLAYPAUSE)	   /* T14 */
+		MATRIX_KEY(0x00, 0x0b, KEY_NEXTSONG)	   /* T15 */
+		MATRIX_KEY(0x03, 0x00, KEY_LEFTMETA)	   /* Search*/
+		MATRIX_KEY(0x01, 0x0e, KEY_LEFTCTRL)	   /* Left Control*/
+		MATRIX_KEY(0x06, 0x0d, KEY_LEFTALT)        /* Left ALT*/
+		MATRIX_KEY(0x03, 0x0e, KEY_RIGHTCTRL)      /* Right Control*/
+		MATRIX_KEY(0x06, 0x0a, KEY_BACKSLASH)      /* BACKSLASH*/
+	>;
+};
+
+&mmc1_pins_default {
+	pins-clk {
+		drive-strength = <8>;
+	};
+
+	pins-cmd-dat {
+		drive-strength = <8>;
+	};
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <8>;
+	};
+
+	pins-cmd-dat {
+		drive-strength = <8>;
+	};
+};
+
+&pen_insert {
+	wakeup-event-action = <EV_ACT_ANY>;
+};
+
+&pio {
+	anx7625_pins: anx7625-pins {
+		pins-int {
+			pinmux = <PINMUX_GPIO9__FUNC_GPIO9>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO98__FUNC_GPIO98>;
+			output-low;
+		};
+
+		pins-power-en {
+			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
+			output-low;
+		};
+	};
+
+	en_pp1000_edpbrdg: pp1000-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO29__FUNC_GPIO29>;
+			output-low;
+		};
+	};
+
+	en_pp1800_edpbrdg: pp1800-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO30__FUNC_GPIO30>;
+			output-low;
+		};
+	};
+
+	en_pp3300_edpbrdg: pp3300-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO31__FUNC_GPIO31>;
+			output-low;
+		};
+	};
+
+	touch_pin_report: pin-report-pins {
+		pins-touch-en {
+			pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
+			output-low;
+		};
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8186-mt6366-rt5650-sound";
+	model = "mt8186_rt5650";
+	mediatek,adsp = <&adsp>;
+
+	audio-routing =
+		"Headphone", "HPOL",
+		"Headphone", "HPOR",
+		"IN1P", "Headset Mic",
+		"IN1N", "Headset Mic",
+		"Speakers", "SPOL",
+		"Speakers", "SPOR",
+		"HDMI1", "TX";
+
+	hs-playback-dai-link {
+		codec {
+			sound-dai = <&rt5650>;
+		};
+	};
+
+	hs-capture-dai-link {
+		codec {
+			sound-dai = <&rt5650>;
+		};
+	};
+
+	spk-share-dai-link {
+	};
+
+	spk-hdmi-playback-dai-link {
+		codec {
+			sound-dai = <&it6505dptx>;
+		};
+	};
+};
+
+&touchscreen_pins {
+	/delete-node/ pins-report-sw;
+};
+
+&wifi_enable_pin {
+	pins-wifi-enable {
+		pinmux = <PINMUX_GPIO51__FUNC_GPIO51>;
+	};
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&pio 51 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
new file mode 100644
index 000000000000..72a2a2bff0a9
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		i2c4 = &i2c4;
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&ps8640_in>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	edp-bridge@8 {
+		compatible = "parade,ps8640";
+		reg = <0x8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ps8640_pins>;
+		powerdown-gpios = <&pio 96 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&pio 98 GPIO_ACTIVE_LOW>;
+		vdd12-supply = <&mt6366_vrf12_reg>;
+		vdd33-supply = <&mt6366_vcn33_reg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				ps8640_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				ps8640_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel {
+				compatible = "edp-panel";
+				power-supply = <&pp3300_disp_x>;
+				backlight = <&backlight_lcd0>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&ps8640_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-internal-delay-ns = <10000>;
+
+	touchscreen: touchscreen@10 {
+		compatible = "elan,ekth6915";
+		reg = <0x10>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&pp3300_s3>;
+		no-reset-on-power-off;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	proximity@28 {
+		compatible = "semtech,sx9324";
+		reg = <0x28>;
+		#io-channel-cells = <1>;
+		interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sar_sensor_pins>;
+		vdd-supply = <&mt6366_vio18_reg>;
+		svdd-supply = <&mt6366_vio18_reg>;
+	};
+};
+
+&pio {
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO136__FUNC_SDA4>,
+				 <PINMUX_GPIO135__FUNC_SCL4>;
+			bias-disable;
+			drive-strength = <4>;
+			input-enable;
+		};
+	};
+
+	ps8640_pins: ps8640-pins {
+		pins-pwrdn-rst {
+			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>,
+				 <PINMUX_GPIO98__FUNC_GPIO98>;
+			output-low;
+		};
+	};
+
+	sar_sensor_pins: sar-sensor-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393216.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393216.dts
new file mode 100644
index 000000000000..c9673381ad3b
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393216.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Magneton board";
+	compatible = "google,steelix-sku393219", "google,steelix-sku393216",
+		     "google,steelix", "mediatek,mt8186";
+	chassis-type = "laptop";
+};
+
+&gpio_keys {
+	status = "disabled";
+};
+
+&i2c1 {
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		vdd-supply = <&pp3300_s3>;
+		post-power-on-delay-ms = <350>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&touchscreen {
+	status = "disabled";
+};
+
+&usb_c1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393217.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393217.dts
new file mode 100644
index 000000000000..28e3bbe56421
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393217.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Magneton board";
+	compatible = "google,steelix-sku393220", "google,steelix-sku393217",
+		     "google,steelix", "mediatek,mt8186";
+	chassis-type = "laptop";
+};
+
+&gpio_keys {
+	status = "disabled";
+};
+
+&i2c1 {
+	touchscreen@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		vdd-supply = <&pp3300_s3>;
+		post-power-on-delay-ms = <450>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&touchscreen {
+	status = "disabled";
+};
+
+&usb_c1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393218.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393218.dts
new file mode 100644
index 000000000000..332894218f07
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393218.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Magneton board";
+	compatible = "google,steelix-sku393221", "google,steelix-sku393218",
+		     "google,steelix", "mediatek,mt8186";
+	chassis-type = "laptop";
+};
+
+&gpio_keys {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
+
+&usb_c1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku0.dts
new file mode 100644
index 000000000000..986498af4c70
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku0.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-ponyta.dtsi"
+
+/ {
+	model = "Google Ponyta sku0 board";
+	compatible = "google,ponyta-sku0", "google,ponyta", "mediatek,mt8186";
+};
+
+&i2c2 {
+	trackpad@15 {
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku1.dts
new file mode 100644
index 000000000000..ff5eea0ddeb4
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku1.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-ponyta.dtsi"
+
+/ {
+	model = "Google Ponyta sku1 board";
+	compatible = "google,ponyta-sku1", "google,ponyta", "mediatek,mt8186";
+};
+
+&i2c2 {
+	trackpad@2c {
+		status = "disabled";
+	};
+};
+
+&usb_c1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta.dtsi
new file mode 100644
index 000000000000..0abf69077089
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T8 */
+		MATRIX_KEY(0x00, 0x01, 0)	/* T9 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T10 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T11 */
+		MATRIX_KEY(0x01, 0x05, 0)	/* T12 */
+	>;
+
+	linux,keymap = <
+		CROS_STD_MAIN_KEYMAP
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x00, 0x04, KEY_PLAYPAUSE)
+		MATRIX_KEY(0x00, 0x01, KEY_MICMUTE)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x01, 0x05, KEY_VOLUMEUP)
+	>;
+};
+
+&mt6366codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+};
+
+&sound {
+	model = "mt8186_rt1019_rt5682s";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-rusty-sku196608.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-rusty-sku196608.dts
new file mode 100644
index 000000000000..731b0d60228d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-rusty-sku196608.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Rusty board";
+	compatible = "google,steelix-sku196609", "google,steelix-sku196608",
+		     "google,steelix", "mediatek,mt8186";
+	chassis-type = "laptop";
+};
+
+&gpio_keys {
+	status = "disabled";
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-squirtle.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-squirtle.dts
new file mode 100644
index 000000000000..f721ad4e5c97
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-squirtle.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-voltorb.dtsi"
+
+/ {
+	model = "Google squirtle board";
+	compatible = "google,squirtle", "mediatek,mt8186";
+	chassis-type = "convertible";
+};
+
+&i2c1 {
+	touchscreen@10 {
+		compatible = "elan,ekth6915";
+		reg = <0x10>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&pp3300_s3>;
+		status = "fail-needs-probe";
+	};
+
+	touchscreen@16 {
+		compatible = "elan,ekth8d18", "elan,ekth6a12nay";
+		reg = <0x16>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&pp3300_s3>;
+		status = "fail-needs-probe";
+	};
+};
+
+&i2c2 {
+	trackpad@68 {
+		compatible = "hid-over-i2c";
+		reg = <0x68>;
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pin>;
+		vdd-supply = <&pp3300_s3>;
+		wakeup-source;
+		status = "fail-needs-probe";
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	/delete-node/ codec@1a;
+
+	rt5650: codec@1a {
+		compatible = "realtek,rt5650";
+		reg = <0x1a>;
+		interrupts-extended = <&pio 17 IRQ_TYPE_EDGE_BOTH>;
+		avdd-supply = <&mt6366_vio18_reg>;
+		cpvdd-supply = <&mt6366_vio18_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&speaker_codec_pins_default>;
+		cbj-sleeve-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+		realtek,dmic1-data-pin = <2>;
+		realtek,jd-mode = <2>;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8186-mt6366-rt5650-sound";
+	model = "mt8186_rt5650";
+
+	audio-routing =
+		"Headphone", "HPOL",
+		"Headphone", "HPOR",
+		"HDMI1", "TX";
+
+	hs-playback-dai-link {
+		codec {
+			sound-dai = <&rt5650>;
+		};
+	};
+
+	hs-capture-dai-link {
+		codec {
+			sound-dai = <&rt5650>;
+		};
+	};
+
+	spk-hdmi-playback-dai-link {
+		codec {
+			sound-dai = <&it6505dptx>;
+		};
+	};
+};
+
+&speaker_codec {
+	status = "disabled";
+};
+
+&trackpad_steelix {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku0.dts
new file mode 100644
index 000000000000..23e194579bf2
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku0.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-starmie.dtsi"
+
+/ {
+	model = "Google Starmie sku0 board";
+	compatible = "google,starmie-sku0", "google,starmie-sku2",
+		     "google,starmie-sku3", "google,starmie",
+		     "mediatek,mt8186";
+};
+
+&panel {
+	compatible = "starry,ili9882t";
+};
+
+&i2c1 {
+	touchscreen: touchscreen@41 {
+		compatible = "ilitek,ili9882t";
+		reg = <0x41>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		panel = <&panel>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vccio-supply = <&mt6366_vio18_reg>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku1.dts
new file mode 100644
index 000000000000..214b972c9357
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku1.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-starmie.dtsi"
+
+/ {
+	model = "Google Starmie sku1 board";
+	compatible = "google,starmie-sku1", "google,starmie-sku4",
+		     "google,starmie", "mediatek,mt8186";
+};
+
+&panel {
+	compatible = "starry,himax83102-j02", "himax,hx83102";
+};
+
+&i2c1 {
+	touchscreen_himax: touchscreen@4f {
+		compatible = "hid-over-i2c";
+		reg = <0x4f>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		vdd-supply = <&mt6366_vio18_reg>;
+		panel = <&panel>;
+		post-power-on-delay-ms = <450>;
+		hid-descr-addr = <0x0001>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi
new file mode 100644
index 000000000000..a8e79c2791ba
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi
@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola.dtsi"
+
+/ {
+	en_pp6000_mipi_disp_150ma: en-pp6000-mipi-disp-150ma {
+		compatible = "regulator-fixed";
+		regulator-name = "en_pp6000_mipi_disp_150ma";
+		gpio = <&pio 154 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp6000_mipi_disp_150ma_fixed_pins>;
+	};
+
+	/*
+	 * Starmie does not have 3.3V display regulator. It is replaced
+	 * with 6V module for enabling panel, re-using eDP GPIOs.
+	 */
+	/delete-node/ pp3300_disp_x;
+	en_pp6000_mipi_disp: en-regulator-pp6000-mipi-disp {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_fixed_pins>;
+		gpios = <&pio 153 GPIO_ACTIVE_HIGH>;
+		regulator-name = "en_pp6000_mipi_disp";
+		enable-active-high;
+		regulator-enable-ramp-delay = <3000>;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	tboard_thermistor1: thermal-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-5000) 1492
+						0 1413
+						5000 1324
+						10000 1227
+						15000 1121
+						20000 1017
+						25000 900
+						30000 797
+						35000 698
+						40000 606
+						45000 522
+						50000 449
+						55000 383
+						60000 327
+						65000 278
+						70000 236
+						75000 201
+						80000 171
+						85000 145
+						90000 163
+						95000 124
+						100000 91
+						105000 78
+						110000 67
+						115000 58
+						120000 50
+						125000 44>;
+	};
+
+	tboard_thermistor2: thermal-sensor2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-5000) 1492
+						0 1413
+						5000 1324
+						10000 1227
+						15000 1121
+						20000 1017
+						25000 900
+						30000 797
+						35000 698
+						40000 606
+						45000 522
+						50000 449
+						55000 383
+						60000 327
+						65000 278
+						70000 236
+						75000 201
+						80000 171
+						85000 145
+						90000 163
+						95000 124
+						100000 91
+						105000 78
+						110000 67
+						115000 58
+						120000 50
+						125000 44>;
+	};
+};
+
+/*
+ * Starmie does not have EC keyboard. Remove default keyboard controller
+ * and replace it with the driver for side switches.
+ */
+/delete-node/ &keyboard_controller;
+
+&cros_ec {
+	cbas: cbas {
+		compatible = "google,cros-cbas";
+	};
+
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 98 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_default_pins>;
+		avdd-supply = <&en_pp6000_mipi_disp>;
+		avee-supply = <&en_pp6000_mipi_disp_150ma>;
+		pp1800-supply = <&mt6366_vio18_reg>;
+		backlight = <&backlight_lcd0>;
+		rotation = <270>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c4 {
+	status = "disabled";
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+};
+
+&mmc1_pins_default {
+	pins-clk {
+		drive-strength = <8>;
+	};
+
+	pins-cmd-dat {
+		drive-strength = <8>;
+	};
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <8>;
+	};
+
+	pins-cmd-dat {
+		drive-strength = <8>;
+	};
+};
+
+&pen_insert {
+	wakeup-event-action = <EV_ACT_ANY>;
+};
+
+&pio {
+	/* 185 lines */
+	gpio-line-names = "TP",
+			  "TP",
+			  "TP",
+			  "I2S0_HP_DI",
+			  "I2S3_DP_SPKR_DO",
+			  "SAR_INT_ODL",
+			  "BT_WAKE_AP_ODL",
+			  "WIFI_INT_ODL",
+			  "DPBRDG_INT_ODL",
+			  "NC",
+			  "EC_AP_HPD_OD",
+			  "NC",
+			  "TCHSCR_INT_1V8_ODL",
+			  "EC_AP_INT_ODL",
+			  "EC_IN_RW_ODL",
+			  "GSC_AP_INT_ODL",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics
+			   * call it AP_WP_ODL.
+			   */
+			  "AP_FLASH_WP_L",
+			  "HP_INT_ODL",
+			  "PEN_EJECT_OD",
+			  "NC",
+			  "NC",
+			  "UCAM_SEN_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "I2S2_DP_SPK_MCK",
+			  "I2S2_DP_SPKR_BCK",
+			  "I2S2_DP_SPKR_LRCK",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "UART_GSC_TX_AP_RX",
+			  "UART_AP_TX_GSC_RX",
+			  "UART_DBGCON_TX_ADSP_RX",
+			  "UART_ADSP_TX_DBGCON_RX",
+			  "NC",
+			  "TCHSCR_REPORT_DISABLE",
+			  "NC",
+			  "EN_PP1800_DPBRDG",
+			  "SPI_AP_CLK_EC",
+			  "SPI_AP_CS_EC_L",
+			  "SPI_AP_DO_EC_DI",
+			  "SPI_AP_DI_EC_DO",
+			  "SPI_AP_CLK_GSC",
+			  "SPI_AP_CS_GSC_L",
+			  "SPI_AP_DO_GSC_DI",
+			  "SPI_AP_DI_GSC_DO",
+			  "UART_DBGCON_TX_SCP_RX",
+			  "UART_SCP_TX_DBGCON_RX",
+			  "EN_PP1200_CAM_X",
+			  "WLAN_MODULE_RST_L",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "I2S1_HP_DO",
+			  "I2S1_HP_BCK",
+			  "I2S1_HP_LRCK",
+			  "I2S1_HP_MCK",
+			  "TCHSCR_RST_1V8_L",
+			  "SPI_AP_CLK_ROM",
+			  "SPI_AP_CS_ROM_L",
+			  "SPI_AP_DO_ROM_DI",
+			  "SPI_AP_DI_ROM_DO",
+			  "NC",
+			  "NC",
+			  "EMMC_STRB",
+			  "EMMC_CLK",
+			  "EMMC_CMD",
+			  "EMMC_RST_L",
+			  "EMMC_DATA0",
+			  "EMMC_DATA1",
+			  "EMMC_DATA2",
+			  "EMMC_DATA3",
+			  "EMMC_DATA4",
+			  "EMMC_DATA5",
+			  "EMMC_DATA6",
+			  "EMMC_DATA7",
+			  "AP_KPCOL0",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "TP",
+			  "SDIO_CLK",
+			  "SDIO_CMD",
+			  "SDIO_DATA0",
+			  "SDIO_DATA1",
+			  "SDIO_DATA2",
+			  "SDIO_DATA3",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "MIPI_BL_PWM_1V8",
+			  "DISP_RST_1V8_L",
+			  "MIPI_DPI_CLK",
+			  "MIPI_DPI_VSYNC",
+			  "MIPI_DPI_HSYNC",
+			  "MIPI_DPI_DE",
+			  "MIPI_DPI_D0",
+			  "MIPI_DPI_D1",
+			  "MIPI_DPI_D2",
+			  "MIPI_DPI_D3",
+			  "MIPI_DPI_D4",
+			  "MIPI_DPI_D5",
+			  "MIPI_DPI_D6",
+			  "MIPI_DPI_DA7",
+			  "MIPI_DPI_D8",
+			  "MIPI_DPI_D9",
+			  "MIPI_DPI_D10",
+			  "MIPI_DPI_D11",
+			  "PCM_BT_CLK",
+			  "PCM_BT_SYNC",
+			  "PCM_BT_DI",
+			  "PCM_BT_DO",
+			  "JTAG_TMS_TP",
+			  "JTAG_TCK_TP",
+			  "JTAG_TDI_TP",
+			  "JTAG_TDO_TP",
+			  "JTAG_TRSTN_TP",
+			  "NC",
+			  "NC",
+			  "UCAM_DET_ODL",
+			  "NC",
+			  "NC",
+			  "AP_I2C_TCHSCR_SCL_1V8",
+			  "AP_I2C_TCHSCR_SDA_1V8",
+			  "NC",
+			  "NC",
+			  "AP_I2C_DPBRDG_SCL_1V8",
+			  "AP_I2C_DPBRDG_SDA_1V8",
+			  "NC",
+			  "NC",
+			  "AP_I2C_AUD_SCL_1V8",
+			  "AP_I2C_AUD_SDA_1V8",
+			  "AP_I2C_DISP_SCL_1V8",
+			  "AP_I2C_DISP_SDA_1V8",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SCP_I2C_SENSOR_SCL_1V8",
+			  "SCP_I2C_SENSOR_SDA_1V8",
+			  "AP_EC_WARM_RST_REQ",
+			  "AP_XHCI_INIT_DONE",
+			  "USB3_HUB_RST_L",
+			  "EN_SPKR",
+			  "BEEP_ON",
+			  "AP_DISP_BKLTEN",
+			  "EN_PP6000_MIPI_DISP",
+			  "EN_PP6000_MIPI_DISP_150MA",
+			  "BT_KILL_1V8_L",
+			  "WIFI_KILL_1V8_L",
+			  "PWRAP_SPI0_CSN",
+			  "PWRAP_SPI0_CK",
+			  "PWRAP_SPI0_MO",
+			  "PWRAP_SPI0_MI",
+			  "SRCLKENA0",
+			  "SRCLKENA1",
+			  "SCP_VREQ_VAO",
+			  "AP_RTC_CLK32K",
+			  "AP_PMIC_WDTRST_L",
+			  "AUD_CLK_MOSI",
+			  "AUD_SYNC_MOSI",
+			  "AUD_DAT_MOSI0",
+			  "AUD_DAT_MOSI1",
+			  "AUD_CLK_MISO",
+			  "AUD_SYNC_MISO",
+			  "AUD_DAT_MISO0",
+			  "AUD_DAT_MISO1",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "DPBRDG_RST_L",
+			  "LTE_W_DISABLE_L",
+			  "LTE_SAR_DETECT_L",
+			  "EN_PP3300_LTE_X",
+			  "LTE_PWR_OFF_L",
+			  "LTE_RESET_L",
+			  "TP",
+			  "TP";
+
+	en_pp6000_mipi_disp_150ma_fixed_pins: en_pp6000-mipi-disp-150ma-fixed-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO154__FUNC_GPIO154>;
+			output-low;
+		};
+	};
+
+	panel_default_pins: panel-default-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO98__FUNC_GPIO98>;
+			output-low;
+		};
+	};
+};
+
+&usb_c1 {
+	status = "disabled";
+};
+
+&thermal_zones {
+	tboard1-thermal {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&tboard_thermistor1>;
+	};
+
+	tboard2-thermal {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&tboard_thermistor2>;
+	};
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&pio 51 1>;
+};
+
+/*
+ * Battery on Starmie is using a different address than default.
+ * Remove old node to reuse "battery" alias.
+ */
+/delete-node/ &battery;
+&i2c_tunnel {
+	battery: sbs-battery@f {
+		compatible = "sbs,sbs-battery";
+		reg = <0xf>;
+		sbs,i2c-retry-count = <2>;
+		sbs,poll-retry-count = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts
new file mode 100644
index 000000000000..eae17bca8585
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Steelix board";
+	compatible = "google,steelix-sku131072", "google,steelix",
+		     "mediatek,mt8186";
+	chassis-type = "convertible";
+};
+
+&mt6366codec {
+	mediatek,dmic-mode = <0>; /* two-wire */
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts
new file mode 100644
index 000000000000..a55375b95d0d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Steelix board";
+	compatible = "google,steelix-sku131073", "google,steelix",
+		     "mediatek,mt8186";
+	chassis-type = "convertible";
+};
+
+&mt6366codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
new file mode 100644
index 000000000000..8a196dc9a96b
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/{
+	pp1000_edpbrdg: regulator-pp1000-edpbrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1000_edpbrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp1000_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 29 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	pp1800_edpbrdg_dx: regulator-pp1800-edpbrdg-dx {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_edpbrdg_dx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp1800_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 30 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6366_vio18_reg>;
+	};
+
+	pp3300_edp_dx: regulator-pp3300-edp-dx {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_edp_dx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 31 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_z2>;
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&anx7625_in>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	anx_bridge: anx7625@58 {
+		compatible = "analogix,anx7625";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&anx7625_pins>;
+		enable-gpios = <&pio 96 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+		vdd10-supply = <&pp1000_edpbrdg>;
+		vdd18-supply = <&pp1800_edpbrdg_dx>;
+		vdd33-supply = <&pp3300_edp_dx>;
+		analogix,lane0-swing = /bits/ 8 <0x70 0x30>;
+		analogix,lane1-swing = /bits/ 8 <0x70 0x30>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				anx7625_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+					data-lanes = <0 1 2 3>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				anx7625_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "edp-panel";
+				power-supply = <&pp3300_disp_x>;
+				backlight = <&backlight_lcd0>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&anx7625_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	touchscreen: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&pp3300_s3>;
+		goodix,no-reset-during-suspend;
+	};
+};
+
+&i2c2 {
+	i2c-scl-internal-delay-ns = <22000>;
+
+	/* second source component */
+	trackpad_steelix: trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pin>;
+		vdd-supply = <&pp3300_s3>;
+		wakeup-source;
+		status = "fail-needs-probe";
+	};
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x01, 0x04, KEY_MICMUTE)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&pio {
+	anx7625_pins: anx7625-pins {
+		pins-int {
+			pinmux = <PINMUX_GPIO9__FUNC_GPIO9>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO98__FUNC_GPIO98>;
+			output-low;
+		};
+
+		pins-power-en {
+			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
+			output-low;
+		};
+	};
+
+	en_pp1000_edpbrdg: pp1000-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO29__FUNC_GPIO29>;
+			output-low;
+		};
+	};
+
+	en_pp1800_edpbrdg: pp1800-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO30__FUNC_GPIO30>;
+			output-low;
+		};
+	};
+
+	en_pp3300_edpbrdg: pp3300-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO31__FUNC_GPIO31>;
+			output-low;
+		};
+	};
+};
+
+&trackpad {
+	status = "fail-needs-probe";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
new file mode 100644
index 000000000000..9bb64353ca65
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-krabby.dtsi"
+
+/ {
+	model = "Google Tentacool board";
+	compatible = "google,tentacruel-sku327681", "google,tentacruel", "mediatek,mt8186";
+	chassis-type = "laptop";
+};
+
+/* Tentacool omits the pen. */
+&gpio_keys {
+	status = "disabled";
+};
+
+/* Tentacool omits the touchscreen; nothing else is on i2c1. */
+&i2c1 {
+	status = "disabled";
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+/* Tentacool omits the touchscreen. */
+&touchscreen {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
new file mode 100644
index 000000000000..4dbf2cb73a81
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+#include "mt8186-corsola-tentacool-sku327681.dts"
+
+/ {
+	compatible = "google,tentacruel-sku327683", "google,tentacruel", "mediatek,mt8186";
+};
+
+/* This variant replaces only the trackpad controller. */
+&i2c2 {
+	/delete-node/ trackpad@15;
+
+	trackpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pin>;
+		hid-descr-addr = <0x0001>;
+		vdd-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
new file mode 100644
index 000000000000..24d9ede63eaa
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-krabby.dtsi"
+
+/ {
+	model = "Google Tentacruel board";
+	compatible = "google,tentacruel-sku262147", "google,tentacruel-sku262146",
+		     "google,tentacruel-sku262145", "google,tentacruel-sku262144",
+		     "google,tentacruel", "mediatek,mt8186";
+	chassis-type = "convertible";
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&touchscreen {
+	compatible = "elan,ekth6a12nay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
new file mode 100644
index 000000000000..ee5bc2cd9e9f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+#include "mt8186-corsola-tentacruel-sku262144.dts"
+
+/ {
+	compatible = "google,tentacruel-sku262151", "google,tentacruel-sku262150",
+		     "google,tentacruel-sku262149", "google,tentacruel-sku262148",
+		     "google,tentacruel", "mediatek,mt8186";
+};
+
+/* This variant replaces only the trackpad controller. */
+&i2c2 {
+	/delete-node/ trackpad@15;
+
+	trackpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pin>;
+		hid-descr-addr = <0x0001>;
+		vdd-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dts
new file mode 100644
index 000000000000..cc805408a8b7
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-voltorb.dtsi"
+
+/ {
+	model = "Google Voltorb board";
+	compatible = "google,voltorb", "mediatek,mt8186";
+};
+
+&i2c1 {
+	touchscreen@10 {
+		compatible = "elan,ekth6915";
+		reg = <0x10>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&pp3300_s3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi
new file mode 100644
index 000000000000..b495a241b443
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	chassis-type = "laptop";
+};
+
+&cpu6 {
+	proc-supply = <&mt6319_buck1>;
+};
+
+&cpu7 {
+	proc-supply = <&mt6319_buck1>;
+};
+
+&gpio_keys {
+	status = "disabled";
+};
+
+&keyboard_controller {
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&mt6366_vproc11_reg {
+	status = "disabled";
+};
+
+&cluster1_opp_14 {
+	opp-hz = /bits/ 64 <2050000000>;
+	opp-microvolt = <1118750>;
+};
+
+&cluster1_opp_15 {
+	opp-hz = /bits/ 64 <2200000000>;
+};
+
+&sound {
+	compatible = "mediatek,mt8186-mt6366-rt5682s-max98360-sound";
+};
+
+&speaker_codec {
+	compatible = "maxim,max98360a";
+	sdmode-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
+	/delete-property/ sdb-gpios;
+};
+
+&spmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spmi_pins>;
+	#address-cells = <2>;
+	#size-cells = <0>;
+	status = "okay";
+
+	pmic@6 {
+		compatible = "mediatek,mt6319-regulator", "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6319_buck1: vbuck1 {
+					regulator-name = "ppvar_dvdd_proc_bc_mt6319";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1193750>;
+					regulator-enable-ramp-delay = <256>;
+					regulator-allowed-modes = <0 1 2>;
+					regulator-always-on;
+			};
+		};
+	};
+};
+
+&touchscreen {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
new file mode 100644
index 000000000000..ff20376a44d7
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
@@ -0,0 +1,1725 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8186.dtsi"
+#include <dt-bindings/pinctrl/mt8186-pinfunc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/regulator/mediatek,mt6397-regulator.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* The size should be filled in by the bootloader. */
+		reg = <0 0x40000000 0 0>;
+	};
+
+	backlight_lcd0: backlight-lcd0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 500000>;
+		power-supply = <&ppvar_sys>;
+		enable-gpios = <&pio 152 0>;
+		brightness-levels = <0 1023>;
+		num-interpolated-steps = <1023>;
+		default-brightness-level = <576>;
+	};
+
+	bt-sco {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <0>;
+	};
+
+	dmic-codec {
+		compatible = "dmic-codec";
+		#sound-dai-cells = <0>;
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_eject>;
+
+		pen_insert: pen-insert-switch {
+			label = "Pen Insert";
+			/* Insert = low, eject = high */
+			gpios = <&pio 18 GPIO_ACTIVE_LOW>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+			linux,code = <SW_PEN_INSERTED>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	pp1800_dpbrdg_dx: regulator-pp1800-dpbrdg-dx {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp1800_dpbrdg>;
+		gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
+		regulator-name = "pp1800_dpbrdg_dx";
+		enable-active-high;
+		vin-supply = <&mt6366_vio18_reg>;
+	};
+
+	pp3300_disp_x: regulator-pp3300-disp-x {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_fixed_pins>;
+		gpios = <&pio 153 GPIO_ACTIVE_HIGH>;
+		regulator-name = "pp3300_disp_x";
+		enable-active-high;
+		regulator-boot-on;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	/* system wide LDO 3.3V power rail */
+	pp3300_z5: regulator-pp3300-ldo-z5 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_ldo_z5";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* separately switched 3.3V power rail */
+	pp3300_s3: regulator-pp3300-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_s3";
+		/* automatically sequenced by PMIC EXT_PMIC_EN2 */
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	/* system wide 3.3V power rail */
+	pp3300_z2: regulator-pp3300-z2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_z2";
+		/* EN pin tied to pp4200_z2, which is controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide 4.2V power rail */
+	pp4200_z2: regulator-pp4200-z2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp4200_z2";
+		/* controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide switching 5.0V power rail */
+	pp5000_z2: regulator-pp5000-z2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_z2";
+		/* controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide semi-regulated power rail from battery or USB */
+	ppvar_sys: regulator-ppvar-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		afe_dma_mem: audio-dma-pool {
+			compatible = "shared-dma-pool";
+			size = <0 0x100000>;
+			alignment = <0 0x10>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0x1000000>;
+			no-map;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x10a0000>;
+			no-map;
+		};
+	};
+
+	sound: sound {
+		compatible = "mediatek,mt8186-mt6366-rt1019-rt5682s-sound";
+		pinctrl-names = "aud_clk_mosi_off",
+				"aud_clk_mosi_on",
+				"aud_clk_miso_off",
+				"aud_clk_miso_on",
+				"aud_dat_miso_off",
+				"aud_dat_miso_on",
+				"aud_dat_mosi_off",
+				"aud_dat_mosi_on",
+				"aud_gpio_i2s0_off",
+				"aud_gpio_i2s0_on",
+				"aud_gpio_i2s1_off",
+				"aud_gpio_i2s1_on",
+				"aud_gpio_i2s2_off",
+				"aud_gpio_i2s2_on",
+				"aud_gpio_i2s3_off",
+				"aud_gpio_i2s3_on",
+				"aud_gpio_pcm_off",
+				"aud_gpio_pcm_on",
+				"aud_gpio_dmic_sec";
+		pinctrl-0 = <&aud_clk_mosi_off>;
+		pinctrl-1 = <&aud_clk_mosi_on>;
+		pinctrl-2 = <&aud_clk_miso_off>;
+		pinctrl-3 = <&aud_clk_miso_on>;
+		pinctrl-4 = <&aud_dat_miso_off>;
+		pinctrl-5 = <&aud_dat_miso_on>;
+		pinctrl-6 = <&aud_dat_mosi_off>;
+		pinctrl-7 = <&aud_dat_mosi_on>;
+		pinctrl-8 = <&aud_gpio_i2s0_off>;
+		pinctrl-9 = <&aud_gpio_i2s0_on>;
+		pinctrl-10 = <&aud_gpio_i2s1_off>;
+		pinctrl-11 = <&aud_gpio_i2s1_on>;
+		pinctrl-12 = <&aud_gpio_i2s2_off>;
+		pinctrl-13 = <&aud_gpio_i2s2_on>;
+		pinctrl-14 = <&aud_gpio_i2s3_off>;
+		pinctrl-15 = <&aud_gpio_i2s3_on>;
+		pinctrl-16 = <&aud_gpio_pcm_off>;
+		pinctrl-17 = <&aud_gpio_pcm_on>;
+		pinctrl-18 = <&aud_gpio_dmic_sec>;
+		mediatek,adsp = <&adsp>;
+		mediatek,platform = <&afe>;
+
+		audio-routing =
+			"Headphone", "HPOL",
+			"Headphone", "HPOR",
+			"IN1P", "Headset Mic",
+			"Speakers", "Speaker",
+			"HDMI1", "TX";
+
+		hs-playback-dai-link {
+			link-name = "I2S0";
+			dai-format = "i2s";
+			mediatek,clk-provider = "cpu";
+			codec {
+				sound-dai = <&rt5682s 0>;
+			};
+		};
+
+		hs-capture-dai-link {
+			link-name = "I2S1";
+			dai-format = "i2s";
+			mediatek,clk-provider = "cpu";
+			codec {
+				sound-dai = <&rt5682s 0>;
+			};
+		};
+
+		spk-share-dai-link {
+			link-name = "I2S2";
+			mediatek,clk-provider = "cpu";
+		};
+
+		spk-hdmi-playback-dai-link {
+			link-name = "I2S3";
+			dai-format = "i2s";
+			mediatek,clk-provider = "cpu";
+			/* RT1019P and IT6505 connected to the same I2S line */
+			codec {
+				sound-dai = <&it6505dptx>, <&speaker_codec>;
+			};
+		};
+	};
+
+	speaker_codec: speaker-codec {
+		compatible = "realtek,rt1019p";
+		pinctrl-names = "default";
+		pinctrl-0 = <&speaker_codec_pins_default>;
+		#sound-dai-cells = <0>;
+		sdb-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb_p1_vbus: regulator-usb-p1-vbus {
+		compatible = "regulator-fixed";
+		gpio = <&pio 148 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vbus1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		vin-supply = <&pp5000_z2>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_pin>;
+		post-power-on-delay-ms = <50>;
+		reset-gpios = <&pio 54 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi_wakeup: wifi-wakeup {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_wakeup_pin>;
+
+		wowlan-event {
+			label = "Wake on WiFi";
+			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+};
+
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	status = "okay";
+};
+
+&cci {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu0 {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu4 {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu5 {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu6 {
+	proc-supply = <&mt6366_vproc11_reg>;
+};
+
+&cpu7 {
+	proc-supply = <&mt6366_vproc11_reg>;
+};
+
+&dpi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dpi_pins_default>;
+	pinctrl-1 = <&dpi_pins_sleep>;
+	/* TODO Re-enable after DP to Type-C port muxing can be described */
+	status = "disabled";
+};
+
+&dpi_out {
+	remote-endpoint = <&it6505_in>;
+};
+
+&dsi0 {
+	status = "okay";
+};
+
+&gic {
+	mediatek,broken-save-restore-fw;
+};
+
+&gpu {
+	mali-supply = <&mt6366_vgpu_reg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	i2c-scl-internal-delay-ns = <8000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	i2c-scl-internal-delay-ns = <10000>;
+	status = "okay";
+
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pin>;
+		vcc-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	it6505dptx: dp-bridge@5c {
+		compatible = "ite,it6505";
+		reg = <0x5c>;
+		interrupts-extended = <&pio 8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&it6505_pins>;
+		#sound-dai-cells = <0>;
+		ovdd-supply = <&mt6366_vsim2_reg>;
+		pwr18-supply = <&pp1800_dpbrdg_dx>;
+		reset-gpios = <&pio 177 GPIO_ACTIVE_LOW>;
+		extcon = <&usbc_extcon>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				it6505_in: endpoint {
+					link-frequencies = /bits/ 64 <150000000>;
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	status = "okay";
+
+	rt5682s: codec@1a {
+		compatible = "realtek,rt5682s";
+		reg = <0x1a>;
+		interrupts-extended = <&pio 17 IRQ_TYPE_EDGE_BOTH>;
+		#sound-dai-cells = <1>;
+		AVDD-supply = <&mt6366_vio18_reg>;
+		DBVDD-supply = <&mt6366_vio18_reg>;
+		LDO1-IN-supply = <&mt6366_vio18_reg>;
+		MICVDD-supply = <&pp3300_z2>;
+		realtek,jd-src = <1>;
+	};
+};
+
+&mfg0 {
+	domain-supply = <&mt6366_vsram_gpu_reg>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6366_vgpu_reg>;
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	no-sd;
+	no-sdio;
+	cap-mmc-hw-reset;
+	hs400-ds-delay = <0x11814>;
+	mediatek,hs400-ds-dly3 = <0x14>;
+	vmmc-supply = <&mt6366_vemc_reg>;
+	vqmmc-supply = <&mt6366_vio18_reg>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs", "state_eint";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	pinctrl-2 = <&mmc1_pins_eint>;
+	/delete-property/ interrupts;
+	interrupt-names = "msdc", "sdio_wakeup";
+	interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>,
+			      <&pio 87 IRQ_TYPE_LEVEL_LOW>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	keep-power-in-suspend;
+	wakeup-source;
+	cap-sdio-irq;
+	no-mmc;
+	no-sd;
+	vmmc-supply = <&pp3300_s3>;
+	vqmmc-supply = <&mt6366_vio18_reg>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+
+	bluetooth@2 {
+		compatible = "mediatek,mt7921s-bluetooth";
+		reg = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins_reset>;
+		reset-gpios = <&pio 155 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&nor_flash {
+	assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D7_D4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <39000000>;
+	};
+};
+
+&pio {
+	/* 185 lines */
+	gpio-line-names = "TP",
+			  "TP",
+			  "TP",
+			  "I2S0_HP_DI",
+			  "I2S3_DP_SPKR_DO",
+			  "SAR_INT_ODL",
+			  "BT_WAKE_AP_ODL",
+			  "WIFI_INT_ODL",
+			  "DPBRDG_INT_ODL",
+			  "EDPBRDG_INT_ODL",
+			  "EC_AP_HPD_OD",
+			  "TCHPAD_INT_ODL",
+			  "TCHSCR_INT_1V8_ODL",
+			  "EC_AP_INT_ODL",
+			  "EC_IN_RW_ODL",
+			  "GSC_AP_INT_ODL",
+			  /* AP_FLASH_WP_L is crossystem ABI. Rev1 schematics call it AP_WP_ODL. */
+			  "AP_FLASH_WP_L",
+			  "HP_INT_ODL",
+			  "PEN_EJECT_OD",
+			  "WCAM_PWDN_L",
+			  "WCAM_RST_L",
+			  "UCAM_SEN_EN",
+			  "UCAM_RST_L",
+			  "LTE_RESET_L",
+			  "LTE_SAR_DETECT_L",
+			  "I2S2_DP_SPK_MCK",
+			  "I2S2_DP_SPKR_BCK",
+			  "I2S2_DP_SPKR_LRCK",
+			  "I2S2_DP_SPKR_DI (TP)",
+			  "EN_PP1000_EDPBRDG",
+			  "EN_PP1800_EDPBRDG",
+			  "EN_PP3300_EDPBRDG",
+			  "UART_GSC_TX_AP_RX",
+			  "UART_AP_TX_GSC_RX",
+			  "UART_DBGCON_TX_ADSP_RX",
+			  "UART_ADSP_TX_DBGCON_RX",
+			  "EN_PP1000_DPBRDG",
+			  "TCHSCR_REPORT_DISABLE",
+			  "EN_PP3300_DPBRDG",
+			  "EN_PP1800_DPBRDG",
+			  "SPI_AP_CLK_EC",
+			  "SPI_AP_CS_EC_L",
+			  "SPI_AP_DO_EC_DI",
+			  "SPI_AP_DI_EC_DO",
+			  "SPI_AP_CLK_GSC",
+			  "SPI_AP_CS_GSC_L",
+			  "SPI_AP_DO_GSC_DI",
+			  "SPI_AP_DI_GSC_DO",
+			  "UART_DBGCON_TX_SCP_RX",
+			  "UART_SCP_TX_DBGCON_RX",
+			  "EN_PP1200_CAM_X",
+			  "EN_PP2800A_VCM_X",
+			  "EN_PP2800A_UCAM_X",
+			  "EN_PP2800A_WCAM_X",
+			  "WLAN_MODULE_RST_L",
+			  "EN_PP1200_UCAM_X",
+			  "I2S1_HP_DO",
+			  "I2S1_HP_BCK",
+			  "I2S1_HP_LRCK",
+			  "I2S1_HP_MCK",
+			  "TCHSCR_RST_1V8_L",
+			  "SPI_AP_CLK_ROM",
+			  "SPI_AP_CS_ROM_L",
+			  "SPI_AP_DO_ROM_DI",
+			  "SPI_AP_DI_ROM_DO",
+			  "NC",
+			  "NC",
+			  "EMMC_STRB",
+			  "EMMC_CLK",
+			  "EMMC_CMD",
+			  "EMMC_RST_L",
+			  "EMMC_DATA0",
+			  "EMMC_DATA1",
+			  "EMMC_DATA2",
+			  "EMMC_DATA3",
+			  "EMMC_DATA4",
+			  "EMMC_DATA5",
+			  "EMMC_DATA6",
+			  "EMMC_DATA7",
+			  "AP_KPCOL0",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "TP",
+			  "SDIO_CLK",
+			  "SDIO_CMD",
+			  "SDIO_DATA0",
+			  "SDIO_DATA1",
+			  "SDIO_DATA2",
+			  "SDIO_DATA3",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "EDPBRDG_PWREN",
+			  "BL_PWM_1V8",
+			  "EDPBRDG_RST_L",
+			  "MIPI_DPI_CLK",
+			  "MIPI_DPI_VSYNC",
+			  "MIPI_DPI_HSYNC",
+			  "MIPI_DPI_DE",
+			  "MIPI_DPI_D0",
+			  "MIPI_DPI_D1",
+			  "MIPI_DPI_D2",
+			  "MIPI_DPI_D3",
+			  "MIPI_DPI_D4",
+			  "MIPI_DPI_D5",
+			  "MIPI_DPI_D6",
+			  "MIPI_DPI_DA7",
+			  "MIPI_DPI_D8",
+			  "MIPI_DPI_D9",
+			  "MIPI_DPI_D10",
+			  "MIPI_DPI_D11",
+			  "PCM_BT_CLK",
+			  "PCM_BT_SYNC",
+			  "PCM_BT_DI",
+			  "PCM_BT_DO",
+			  "JTAG_TMS_TP",
+			  "JTAG_TCK_TP",
+			  "JTAG_TDI_TP",
+			  "JTAG_TDO_TP",
+			  "JTAG_TRSTN_TP",
+			  "CLK_24M_WCAM",
+			  "CLK_24M_UCAM",
+			  "UCAM_DET_ODL",
+			  "AP_I2C_EDPBRDG_SCL_1V8",
+			  "AP_I2C_EDPBRDG_SDA_1V8",
+			  "AP_I2C_TCHSCR_SCL_1V8",
+			  "AP_I2C_TCHSCR_SDA_1V8",
+			  "AP_I2C_TCHPAD_SCL_1V8",
+			  "AP_I2C_TCHPAD_SDA_1V8",
+			  "AP_I2C_DPBRDG_SCL_1V8",
+			  "AP_I2C_DPBRDG_SDA_1V8",
+			  "AP_I2C_WLAN_SCL_1V8",
+			  "AP_I2C_WLAN_SDA_1V8",
+			  "AP_I2C_AUD_SCL_1V8",
+			  "AP_I2C_AUD_SDA_1V8",
+			  "AP_I2C_TPM_SCL_1V8",
+			  "AP_I2C_UCAM_SDA_1V8",
+			  "AP_I2C_UCAM_SCL_1V8",
+			  "AP_I2C_UCAM_SDA_1V8",
+			  "AP_I2C_WCAM_SCL_1V8",
+			  "AP_I2C_WCAM_SDA_1V8",
+			  "SCP_I2C_SENSOR_SCL_1V8",
+			  "SCP_I2C_SENSOR_SDA_1V8",
+			  "AP_EC_WARM_RST_REQ",
+			  "AP_XHCI_INIT_DONE",
+			  "USB3_HUB_RST_L",
+			  "EN_SPKR",
+			  "BEEP_ON",
+			  "AP_EDP_BKLTEN",
+			  "EN_PP3300_DISP_X",
+			  "EN_PP3300_SDBRDG_X",
+			  "BT_KILL_1V8_L",
+			  "WIFI_KILL_1V8_L",
+			  "PWRAP_SPI0_CSN",
+			  "PWRAP_SPI0_CK",
+			  "PWRAP_SPI0_MO",
+			  "PWRAP_SPI0_MI",
+			  "SRCLKENA0",
+			  "SRCLKENA1",
+			  "SCP_VREQ_VAO",
+			  "AP_RTC_CLK32K",
+			  "AP_PMIC_WDTRST_L",
+			  "AUD_CLK_MOSI",
+			  "AUD_SYNC_MOSI",
+			  "AUD_DAT_MOSI0",
+			  "AUD_DAT_MOSI1",
+			  "AUD_CLK_MISO",
+			  "AUD_SYNC_MISO",
+			  "AUD_DAT_MISO0",
+			  "AUD_DAT_MISO1",
+			  "NC",
+			  "NC",
+			  "DPBRDG_PWREN",
+			  "DPBRDG_RST_L",
+			  "LTE_W_DISABLE_L",
+			  "LTE_SAR_DETECT_L",
+			  "EN_PP3300_LTE_X",
+			  "LTE_PWR_OFF_L",
+			  "LTE_RESET_L",
+			  "TP",
+			  "TP";
+
+	aud_clk_mosi_off: aud-clk-mosi-off-pins {
+		pins-clk-sync {
+			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>,
+				 <PINMUX_GPIO167__FUNC_GPIO167>;
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	aud_clk_mosi_on: aud-clk-mosi-on-pins {
+		pins-clk-sync {
+			pinmux = <PINMUX_GPIO166__FUNC_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO167__FUNC_AUD_SYNC_MOSI>;
+		};
+	};
+
+	aud_clk_miso_off: aud-clk-miso-off-pins {
+		pins-clk-sync {
+			pinmux = <PINMUX_GPIO170__FUNC_GPIO170>,
+				 <PINMUX_GPIO171__FUNC_GPIO171>;
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	aud_clk_miso_on: aud-clk-miso-on-pins {
+		pins-clk-sync {
+			pinmux = <PINMUX_GPIO170__FUNC_AUD_CLK_MISO>,
+				 <PINMUX_GPIO171__FUNC_AUD_SYNC_MISO>;
+		};
+	};
+
+	aud_dat_mosi_off: aud-dat-mosi-off-pins {
+		pins-dat {
+			pinmux = <PINMUX_GPIO168__FUNC_GPIO168>,
+				 <PINMUX_GPIO169__FUNC_GPIO169>;
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	aud_dat_mosi_on: aud-dat-mosi-on-pins {
+		pins-dat {
+			pinmux = <PINMUX_GPIO168__FUNC_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO169__FUNC_AUD_DAT_MOSI1>;
+		};
+	};
+
+	aud_dat_miso_off: aud-dat-miso-off-pins {
+		pins-dat {
+			pinmux = <PINMUX_GPIO172__FUNC_GPIO172>,
+				 <PINMUX_GPIO173__FUNC_GPIO173>;
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	aud_dat_miso_on: aud-dat-miso-on-pins {
+		pins-dat {
+			pinmux = <PINMUX_GPIO172__FUNC_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO173__FUNC_AUD_DAT_MISO1>;
+			input-schmitt-enable;
+			bias-disable;
+		};
+	};
+
+	aud_gpio_i2s0_off: aud-gpio-i2s0-off-pins {
+		pins-sdata {
+			pinmux = <PINMUX_GPIO3__FUNC_GPIO3>;
+		};
+	};
+
+	aud_gpio_i2s0_on: aud-gpio-i2s0-on-pins {
+		pins-sdata {
+			pinmux = <PINMUX_GPIO3__FUNC_I2S0_DI>;
+		};
+	};
+
+	aud_gpio_i2s1_off: aud-gpio-i2s-off-pins {
+		pins-clk-sdata {
+			pinmux = <PINMUX_GPIO56__FUNC_GPIO56>,
+				 <PINMUX_GPIO57__FUNC_GPIO57>,
+				 <PINMUX_GPIO58__FUNC_GPIO58>,
+				 <PINMUX_GPIO59__FUNC_GPIO59>;
+			output-low;
+		};
+	};
+
+	aud_gpio_i2s1_on: aud-gpio-i2s1-on-pins {
+		pins-clk-sdata {
+			pinmux = <PINMUX_GPIO56__FUNC_I2S1_DO>,
+				 <PINMUX_GPIO57__FUNC_I2S1_BCK>,
+				 <PINMUX_GPIO58__FUNC_I2S1_LRCK>,
+				 <PINMUX_GPIO59__FUNC_I2S1_MCK>;
+		};
+	};
+
+	aud_gpio_i2s2_off: aud-gpio-i2s2-off-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO26__FUNC_GPIO26>,
+				 <PINMUX_GPIO27__FUNC_GPIO27>;
+			output-low;
+		};
+	};
+
+	aud_gpio_i2s2_on: aud-gpio-i2s2-on-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO26__FUNC_I2S2_BCK>,
+				 <PINMUX_GPIO27__FUNC_I2S2_LRCK>;
+			drive-strength = <4>;
+		};
+	};
+
+	aud_gpio_i2s3_off: aud-gpio-i2s3-off-pins {
+		pins-sdata {
+			pinmux = <PINMUX_GPIO4__FUNC_GPIO4>;
+			output-low;
+		};
+	};
+
+	aud_gpio_i2s3_on: aud-gpio-i2s3-on-pins {
+		pins-sdata {
+			pinmux = <PINMUX_GPIO4__FUNC_I2S3_DO>;
+			drive-strength = <4>;
+		};
+	};
+
+	aud_gpio_pcm_off: aud-gpio-pcm-off-pins {
+		pins-clk-sdata {
+			pinmux = <PINMUX_GPIO115__FUNC_GPIO115>,
+				 <PINMUX_GPIO116__FUNC_GPIO116>,
+				 <PINMUX_GPIO117__FUNC_GPIO117>,
+				 <PINMUX_GPIO118__FUNC_GPIO118>;
+			output-low;
+		};
+	};
+
+	aud_gpio_pcm_on: aud-gpio-pcm-on-pins {
+		pins-clk-sdata {
+			pinmux = <PINMUX_GPIO115__FUNC_PCM_CLK>,
+				 <PINMUX_GPIO116__FUNC_PCM_SYNC>,
+				 <PINMUX_GPIO117__FUNC_PCM_DI>,
+				 <PINMUX_GPIO118__FUNC_PCM_DO>;
+		};
+	};
+
+	aud_gpio_dmic_sec: aud-gpio-dmic-sec-pins {
+		pins {
+			pinmux = <PINMUX_GPIO23__FUNC_GPIO23>;
+			output-low;
+		};
+	};
+
+	bt_pins_reset: bt-reset-pins {
+		pins-bt-reset {
+			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
+			output-high;
+		};
+	};
+
+	dpi_pins_sleep: dpi-sleep-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO103__FUNC_GPIO103>,
+				 <PINMUX_GPIO104__FUNC_GPIO104>,
+				 <PINMUX_GPIO105__FUNC_GPIO105>,
+				 <PINMUX_GPIO106__FUNC_GPIO106>,
+				 <PINMUX_GPIO107__FUNC_GPIO107>,
+				 <PINMUX_GPIO108__FUNC_GPIO108>,
+				 <PINMUX_GPIO109__FUNC_GPIO109>,
+				 <PINMUX_GPIO110__FUNC_GPIO110>,
+				 <PINMUX_GPIO111__FUNC_GPIO111>,
+				 <PINMUX_GPIO112__FUNC_GPIO112>,
+				 <PINMUX_GPIO113__FUNC_GPIO113>,
+				 <PINMUX_GPIO114__FUNC_GPIO114>,
+				 <PINMUX_GPIO101__FUNC_GPIO101>,
+				 <PINMUX_GPIO100__FUNC_GPIO100>,
+				 <PINMUX_GPIO102__FUNC_GPIO102>,
+				 <PINMUX_GPIO99__FUNC_GPIO99>;
+			drive-strength = <10>;
+			output-low;
+		};
+	};
+
+	dpi_pins_default: dpi-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO103__FUNC_DPI_DATA0>,
+				 <PINMUX_GPIO104__FUNC_DPI_DATA1>,
+				 <PINMUX_GPIO105__FUNC_DPI_DATA2>,
+				 <PINMUX_GPIO106__FUNC_DPI_DATA3>,
+				 <PINMUX_GPIO107__FUNC_DPI_DATA4>,
+				 <PINMUX_GPIO108__FUNC_DPI_DATA5>,
+				 <PINMUX_GPIO109__FUNC_DPI_DATA6>,
+				 <PINMUX_GPIO110__FUNC_DPI_DATA7>,
+				 <PINMUX_GPIO111__FUNC_DPI_DATA8>,
+				 <PINMUX_GPIO112__FUNC_DPI_DATA9>,
+				 <PINMUX_GPIO113__FUNC_DPI_DATA10>,
+				 <PINMUX_GPIO114__FUNC_DPI_DATA11>,
+				 <PINMUX_GPIO101__FUNC_DPI_HSYNC>,
+				 <PINMUX_GPIO100__FUNC_DPI_VSYNC>,
+				 <PINMUX_GPIO102__FUNC_DPI_DE>,
+				 <PINMUX_GPIO99__FUNC_DPI_PCLK>;
+			drive-strength = <10>;
+		};
+	};
+
+	ec_ap_int: cros-ec-int-pins {
+		pins-ec-ap-int-odl {
+			pinmux = <PINMUX_GPIO13__FUNC_GPIO13>;
+			input-enable;
+		};
+	};
+
+	edp_panel_fixed_pins: edp-panel-fixed-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
+			output-high;
+		};
+	};
+
+	en_pp1800_dpbrdg: en-pp1800-dpbrdg-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO39__FUNC_GPIO39>;
+			output-low;
+		};
+	};
+
+	gsc_int: gsc-int-pins {
+		pins-gsc-ap-int-odl {
+			pinmux = <PINMUX_GPIO15__FUNC_GPIO15>;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO128__FUNC_SDA0>,
+				 <PINMUX_GPIO127__FUNC_SCL0>;
+			bias-disable;
+			drive-strength = <4>;
+			input-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO130__FUNC_SDA1>,
+				 <PINMUX_GPIO129__FUNC_SCL1>;
+			bias-disable;
+			drive-strength = <4>;
+			input-enable;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO132__FUNC_SDA2>,
+				 <PINMUX_GPIO131__FUNC_SCL2>;
+			bias-disable;
+			drive-strength = <4>;
+			input-enable;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO134__FUNC_SDA3>,
+				 <PINMUX_GPIO133__FUNC_SCL3>;
+			bias-disable;
+			drive-strength = <4>;
+			input-enable;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO138__FUNC_SDA5>,
+				 <PINMUX_GPIO137__FUNC_SCL5>;
+			bias-disable;
+			drive-strength = <4>;
+			input-enable;
+		};
+	};
+
+	it6505_pins: it6505-pins {
+		pins-hpd {
+			pinmux = <PINMUX_GPIO10__FUNC_GPIO10>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-int {
+			pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO177__FUNC_GPIO177>;
+			output-low;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_pins_default: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO68__FUNC_MSDC0_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO71__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO72__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO73__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO74__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO75__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO76__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO77__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO78__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO69__FUNC_MSDC0_CMD>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO70__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO68__FUNC_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO71__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO72__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO73__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO74__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO75__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO76__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO77__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO78__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO69__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO67__FUNC_MSDC0_DSL>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO70__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_pins_default: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO84__FUNC_MSDC1_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO86__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO87__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO88__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO89__FUNC_MSDC1_DAT3>,
+				 <PINMUX_GPIO85__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO84__FUNC_MSDC1_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO86__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO87__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO88__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO89__FUNC_MSDC1_DAT3>,
+				 <PINMUX_GPIO85__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_pins_eint: mmc1-eint-pins {
+		pins-dat1 {
+			pinmux = <PINMUX_GPIO87__FUNC_GPIO87>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	nor_pins_default: nor-default-pins {
+		pins-clk-dat {
+			pinmux = <PINMUX_GPIO63__FUNC_SPINOR_IO0>,
+				 <PINMUX_GPIO61__FUNC_SPINOR_CK>,
+				 <PINMUX_GPIO64__FUNC_SPINOR_IO1>;
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+
+		pins-cs-dat {
+			pinmux = <PINMUX_GPIO62__FUNC_SPINOR_CS>,
+				 <PINMUX_GPIO65__FUNC_SPINOR_IO2>,
+				 <PINMUX_GPIO66__FUNC_SPINOR_IO3>;
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	pen_eject: pen-eject-pins {
+		pins {
+			pinmux = <PINMUX_GPIO18__FUNC_GPIO18>;
+			input-enable;
+			/* External pull-up. */
+			bias-disable;
+		};
+	};
+
+	pwm0_pin: disp-pwm-pins {
+		pins {
+			pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM>;
+			output-high;
+		};
+	};
+
+	speaker_codec_pins_default: speaker-codec-default-pins {
+		pins-sdb {
+			pinmux = <PINMUX_GPIO150__FUNC_GPIO150>;
+			output-low;
+		};
+	};
+
+	scp_pins: scp-default-pins {
+		pins-scp-uart {
+			pinmux = <PINMUX_GPIO48__FUNC_TP_URXD2_AO>,
+				 <PINMUX_GPIO49__FUNC_TP_UTXD2_AO>;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO40__FUNC_SPI1_CLK_A>,
+				 <PINMUX_GPIO41__FUNC_SPI1_CSB_A>,
+				 <PINMUX_GPIO42__FUNC_SPI1_MO_A>,
+				 <PINMUX_GPIO43__FUNC_SPI1_MI_A>;
+			bias-disable;
+			input-enable;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO44__FUNC_SPI2_CLK_A>,
+				 <PINMUX_GPIO45__FUNC_GPIO45>,
+				 <PINMUX_GPIO46__FUNC_SPI2_MO_A>,
+				 <PINMUX_GPIO47__FUNC_SPI2_MI_A>;
+			bias-disable;
+			input-enable;
+		};
+	};
+
+	spmi_pins: spmi-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO183__FUNC_SPMI_SCL>,
+				 <PINMUX_GPIO184__FUNC_SPMI_SDA>;
+		};
+	};
+
+	touchscreen_pins: touchscreen-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO12__FUNC_GPIO12>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO60__FUNC_GPIO60>;
+			output-high;
+		};
+
+		pins-report-sw {
+			pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
+			output-low;
+		};
+	};
+
+	trackpad_pin: trackpad-default-pins {
+		pins-int-n {
+			pinmux = <PINMUX_GPIO11__FUNC_GPIO11>;
+			input-enable;
+			bias-disable; /* pulled externally */
+		};
+	};
+
+	wifi_enable_pin: wifi-enable-pins {
+		pins-wifi-enable {
+			pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
+		};
+	};
+
+	wifi_wakeup_pin: wifi-wakeup-pins {
+		pins-wifi-wakeup {
+			pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
+			input-enable;
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&pwrap {
+	pmic {
+		compatible = "mediatek,mt6366", "mediatek,mt6358";
+		interrupt-controller;
+		interrupts-extended = <&pio 201 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+
+		mt6366codec: audio-codec {
+			compatible = "mediatek,mt6366-sound", "mediatek,mt6358-sound";
+			Avdd-supply = <&mt6366_vaud28_reg>;
+			mediatek,dmic-mode = <1>; /* one-wire */
+		};
+
+		mt6366_regulators: regulators {
+			compatible = "mediatek,mt6366-regulator", "mediatek,mt6358-regulator";
+			vsys-ldo1-supply = <&pp4200_z2>;
+			vsys-ldo2-supply = <&pp4200_z2>;
+			vsys-ldo3-supply = <&pp4200_z2>;
+			vsys-vcore-supply = <&pp4200_z2>;
+			vsys-vdram1-supply = <&pp4200_z2>;
+			vsys-vgpu-supply = <&pp4200_z2>;
+			vsys-vmodem-supply = <&pp4200_z2>;
+			vsys-vpa-supply = <&pp4200_z2>;
+			vsys-vproc11-supply = <&pp4200_z2>;
+			vsys-vproc12-supply = <&pp4200_z2>;
+			vsys-vs1-supply = <&pp4200_z2>;
+			vsys-vs2-supply = <&pp4200_z2>;
+			vs1-ldo1-supply = <&mt6366_vs1_reg>;
+			vs2-ldo1-supply = <&mt6366_vdram1_reg>;
+			vs2-ldo2-supply = <&mt6366_vs2_reg>;
+			vs2-ldo3-supply = <&mt6366_vs2_reg>;
+
+			vcore {
+				regulator-name = "pp0750_dvdd_core";
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <800000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+							   MT6397_BUCK_MODE_FORCE_PWM>;
+				regulator-always-on;
+			};
+
+			mt6366_vdram1_reg: vdram1 {
+				regulator-name = "pp1125_emi_vdd2";
+				regulator-min-microvolt = <1125000>;
+				regulator-max-microvolt = <1125000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+							   MT6397_BUCK_MODE_FORCE_PWM>;
+				regulator-always-on;
+			};
+
+			mt6366_vgpu_reg: vgpu {
+				/*
+				 * Called "ppvar_dvdd_gpu" in the schematic.
+				 * Called "ppvar_dvdd_vgpu" here to match
+				 * regulator coupling requirements.
+				 */
+				regulator-name = "ppvar_dvdd_vgpu";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+							   MT6397_BUCK_MODE_FORCE_PWM>;
+				regulator-coupled-with = <&mt6366_vsram_gpu_reg>;
+				regulator-coupled-max-spread = <100000>;
+			};
+
+			mt6366_vproc11_reg: vproc11 {
+				regulator-name = "ppvar_dvdd_proc_bc_mt6366";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+							   MT6397_BUCK_MODE_FORCE_PWM>;
+				regulator-always-on;
+			};
+
+			mt6366_vproc12_reg: vproc12 {
+				regulator-name = "ppvar_dvdd_proc_lc";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+							   MT6397_BUCK_MODE_FORCE_PWM>;
+				regulator-always-on;
+			};
+
+			mt6366_vs1_reg: vs1 {
+				regulator-name = "pp2000_vs1";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6366_vs2_reg: vs2 {
+				regulator-name = "pp1350_vs2";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			va12 {
+				regulator-name = "pp1200_va12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <270>;
+				regulator-always-on;
+			};
+
+			mt6366_vaud28_reg: vaud28 {
+				regulator-name = "pp2800_vaud28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vaux18_reg: vaux18 {
+				regulator-name = "pp1840_vaux18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1840000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vbif28_reg: vbif28 {
+				regulator-name = "pp2800_vbif28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vcn18_reg: vcn18 {
+				regulator-name = "pp1800_vcn18_x";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vcn28_reg: vcn28 {
+				regulator-name = "pp2800_vcn28_x";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vefuse_reg: vefuse {
+				regulator-name = "pp1800_vefuse";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vfe28_reg: vfe28 {
+				regulator-name = "pp2800_vfe28_x";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vemc_reg: vemc {
+				regulator-name = "pp3000_vemc";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6366_vibr_reg: vibr {
+				regulator-name = "pp2800_vibr_x";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6366_vio18_reg: vio18 {
+				regulator-name = "pp1800_vio18_s3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <2700>;
+				regulator-always-on;
+			};
+
+			mt6366_vio28_reg: vio28 {
+				regulator-name = "pp2800_vio28_x";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vm18_reg: vm18 {
+				regulator-name = "pp1800_emi_vdd1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1840000>;
+				regulator-enable-ramp-delay = <325>;
+				regulator-always-on;
+			};
+
+			mt6366_vmc_reg: vmc {
+				regulator-name = "pp3000_vmc";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6366_vmddr_reg: vmddr {
+				regulator-name = "pm0750_emi_vmddr";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <750000>;
+				regulator-enable-ramp-delay = <325>;
+				regulator-always-on;
+			};
+
+			mt6366_vmch_reg: vmch {
+				regulator-name = "pp3000_vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6366_vcn33_reg: vcn33 {
+				regulator-name = "pp3300_vcn33_x";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			vdram2 {
+				regulator-name = "pp0600_emi_vddq";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <600000>;
+				regulator-enable-ramp-delay = <3300>;
+				regulator-always-on;
+			};
+
+			mt6366_vrf12_reg: vrf12 {
+				regulator-name = "pp1200_vrf12_x";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			mt6366_vrf18_reg: vrf18 {
+				regulator-name = "pp1800_vrf18_x";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			vsim1 {
+				regulator-name = "pp1860_vsim1_x";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1860000>;
+				regulator-enable-ramp-delay = <540>;
+			};
+
+			mt6366_vsim2_reg: vsim2 {
+				regulator-name = "pp2760_vsim2_x";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2760000>;
+				regulator-enable-ramp-delay = <540>;
+			};
+
+			mt6366_vsram_gpu_reg: vsram-gpu {
+				regulator-name = "pp0900_dvdd_sram_gpu";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-coupled-with = <&mt6366_vgpu_reg>;
+				regulator-coupled-max-spread = <100000>;
+			};
+
+			mt6366_vsram_others_reg: vsram-others {
+				regulator-name = "pp0900_dvdd_sram_core";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			mt6366_vsram_proc11_reg: vsram-proc11 {
+				regulator-name = "pp0900_dvdd_sram_bc";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1120000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			mt6366_vsram_proc12_reg: vsram-proc12 {
+				regulator-name = "pp0900_dvdd_sram_lc";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1120000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			vusb {
+				regulator-name = "pp3070_vusb";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3070000>;
+				regulator-enable-ramp-delay = <270>;
+				regulator-always-on;
+			};
+
+			vxo22 {
+				regulator-name = "pp2240_vxo22";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2240000>;
+				regulator-enable-ramp-delay = <120>;
+				/* Feeds DCXO internally */
+				regulator-always-on;
+			};
+		};
+
+		rtc {
+			compatible = "mediatek,mt6366-rtc", "mediatek,mt6358-rtc";
+		};
+	};
+};
+
+&scp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scp_pins>;
+	firmware-name = "mediatek/mt8186/scp.img";
+	memory-region = <&scp_mem>;
+	status = "okay";
+
+	cros-ec-rpmsg {
+		compatible = "google,cros-ec-rpmsg";
+		mediatek,rpmsg-name = "cros-ec-rpmsg";
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupts-extended = <&pio 13 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_ap_int>;
+		spi-max-frequency = <1000000>;
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				label = "left";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				label = "right";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+
+		usbc_extcon: extcon0 {
+			compatible = "google,extcon-usbc-cros-ec";
+			google,usb-port-id = <0>;
+		};
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+	cs-gpios = <&pio 45 GPIO_ACTIVE_LOW>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		interrupts-extended = <&pio 15 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsc_int>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&ssusb0 {
+	status = "okay";
+};
+
+&ssusb1 {
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_host0 {
+	vbus-supply = <&pp3300_s3>;
+	status = "okay";
+};
+
+&usb_host1 {
+	vbus-supply = <&usb_p1_vbus>;
+	status = "okay";
+};
+
+&watchdog {
+	mediatek,reset-by-toprgu;
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-evb.dts b/arch/arm64/boot/dts/mediatek/mt8186-evb.dts
new file mode 100644
index 000000000000..2667a7424200
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-evb.dts
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8186.dtsi"
+
+/ {
+	model = "MediaTek MT8186 evaluation board";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt8186-evb", "mediatek,mt8186";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+};
+
+&i2c1 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-internal-delay-ns = <8000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c2 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-internal-delay-ns = <10000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+};
+
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
+
+&i2c4 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+};
+
+&i2c5 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+};
+
+&i2c6 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+};
+
+&i2c7 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_pins>;
+};
+
+&i2c8 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c8_pins>;
+};
+
+&i2c9 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c9_pins>;
+};
+
+&pio {
+	i2c0_pins: i2c0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO128__FUNC_SDA0>,
+				 <PINMUX_GPIO127__FUNC_SCL0>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO130__FUNC_SDA1>,
+				 <PINMUX_GPIO129__FUNC_SCL1>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c2_pins: i2c2-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO132__FUNC_SDA2>,
+				 <PINMUX_GPIO131__FUNC_SCL2>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c3_pins: i2c3-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO134__FUNC_SDA3>,
+				 <PINMUX_GPIO133__FUNC_SCL3>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c4_pins: i2c4-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO136__FUNC_SDA4>,
+				 <PINMUX_GPIO135__FUNC_SCL4>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c5_pins: i2c5-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO138__FUNC_SDA5>,
+				 <PINMUX_GPIO137__FUNC_SCL5>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c6_pins: i2c6-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO140__FUNC_SDA6>,
+				 <PINMUX_GPIO139__FUNC_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c7_pins: i2c7-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO142__FUNC_SDA7>,
+				 <PINMUX_GPIO141__FUNC_SCL7>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c8_pins: i2c8-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO144__FUNC_SDA8>,
+				 <PINMUX_GPIO143__FUNC_SCL8>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c9_pins: i2c9-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO146__FUNC_SDA9>,
+				 <PINMUX_GPIO145__FUNC_SCL9>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
new file mode 100644
index 000000000000..b91f88ffae0e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -0,0 +1,2521 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ * Author: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
+ */
+/dts-v1/;
+#include <dt-bindings/clock/mt8186-clk.h>
+#include <dt-bindings/gce/mt8186-gce.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/memory/mt8186-memory-port.h>
+#include <dt-bindings/pinctrl/mt8186-pinfunc.h>
+#include <dt-bindings/power/mt8186-power.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/mt8186-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
+
+/ {
+	compatible = "mediatek,mt8186";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ovl0 = &ovl0;
+		ovl-2l0 = &ovl_2l0;
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+	};
+
+	fhctl: fhctl@1000ce00 {
+		compatible = "mediatek,mt8186-fhctl";
+		clocks = <&apmixedsys CLK_APMIXED_TVDPLL>;
+		reg = <0 0x1000ce00 0 0x200>;
+		status = "disabled";
+	};
+
+	cci: cci {
+		compatible = "mediatek,mt8186-cci";
+		clocks = <&mcusys CLK_MCU_ARMPLL_BUS_SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cci", "intermediate";
+		operating-points-v2 = <&cci_opp>;
+	};
+
+	cci_opp: opp-table-cci {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cci_opp_0: opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <600000>;
+		};
+
+		cci_opp_1: opp-560000000 {
+			opp-hz = /bits/ 64 <560000000>;
+			opp-microvolt = <675000>;
+		};
+
+		cci_opp_2: opp-612000000 {
+			opp-hz = /bits/ 64 <612000000>;
+			opp-microvolt = <693750>;
+		};
+
+		cci_opp_3: opp-682000000 {
+			opp-hz = /bits/ 64 <682000000>;
+			opp-microvolt = <718750>;
+		};
+
+		cci_opp_4: opp-752000000 {
+			opp-hz = /bits/ 64 <752000000>;
+			opp-microvolt = <743750>;
+		};
+
+		cci_opp_5: opp-822000000 {
+			opp-hz = /bits/ 64 <822000000>;
+			opp-microvolt = <768750>;
+		};
+
+		cci_opp_6: opp-875000000 {
+			opp-hz = /bits/ 64 <875000000>;
+			opp-microvolt = <781250>;
+		};
+
+		cci_opp_7: opp-927000000 {
+			opp-hz = /bits/ 64 <927000000>;
+			opp-microvolt = <800000>;
+		};
+
+		cci_opp_8: opp-980000000 {
+			opp-hz = /bits/ 64 <980000000>;
+			opp-microvolt = <818750>;
+		};
+
+		cci_opp_9: opp-1050000000 {
+			opp-hz = /bits/ 64 <1050000000>;
+			opp-microvolt = <843750>;
+		};
+
+		cci_opp_10: opp-1120000000 {
+			opp-hz = /bits/ 64 <1120000000>;
+			opp-microvolt = <862500>;
+		};
+
+		cci_opp_11: opp-1155000000 {
+			opp-hz = /bits/ 64 <1155000000>;
+			opp-microvolt = <887500>;
+		};
+
+		cci_opp_12: opp-1190000000 {
+			opp-hz = /bits/ 64 <1190000000>;
+			opp-microvolt = <906250>;
+		};
+
+		cci_opp_13: opp-1260000000 {
+			opp-hz = /bits/ 64 <1260000000>;
+			opp-microvolt = <950000>;
+		};
+
+		cci_opp_14: opp-1330000000 {
+			opp-hz = /bits/ 64 <1330000000>;
+			opp-microvolt = <993750>;
+		};
+
+		cci_opp_15: opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1031250>;
+		};
+	};
+
+	cluster0_opp: opp-table-cluster0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <600000>;
+			required-opps = <&cci_opp_0>;
+		};
+
+		opp-774000000 {
+			opp-hz = /bits/ 64 <774000000>;
+			opp-microvolt = <675000>;
+			required-opps = <&cci_opp_1>;
+		};
+
+		opp-875000000 {
+			opp-hz = /bits/ 64 <875000000>;
+			opp-microvolt = <700000>;
+			required-opps = <&cci_opp_2>;
+		};
+
+		opp-975000000 {
+			opp-hz = /bits/ 64 <975000000>;
+			opp-microvolt = <725000>;
+			required-opps = <&cci_opp_3>;
+		};
+
+		opp-1075000000 {
+			opp-hz = /bits/ 64 <1075000000>;
+			opp-microvolt = <750000>;
+			required-opps = <&cci_opp_4>;
+		};
+
+		opp-1175000000 {
+			opp-hz = /bits/ 64 <1175000000>;
+			opp-microvolt = <775000>;
+			required-opps = <&cci_opp_5>;
+		};
+
+		opp-1275000000 {
+			opp-hz = /bits/ 64 <1275000000>;
+			opp-microvolt = <800000>;
+			required-opps = <&cci_opp_6>;
+		};
+
+		opp-1375000000 {
+			opp-hz = /bits/ 64 <1375000000>;
+			opp-microvolt = <825000>;
+			required-opps = <&cci_opp_7>;
+		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <856250>;
+			required-opps = <&cci_opp_8>;
+		};
+
+		opp-1618000000 {
+			opp-hz = /bits/ 64 <1618000000>;
+			opp-microvolt = <875000>;
+			required-opps = <&cci_opp_9>;
+		};
+
+		opp-1666000000 {
+			opp-hz = /bits/ 64 <1666000000>;
+			opp-microvolt = <900000>;
+			required-opps = <&cci_opp_10>;
+		};
+
+		opp-1733000000 {
+			opp-hz = /bits/ 64 <1733000000>;
+			opp-microvolt = <925000>;
+			required-opps = <&cci_opp_11>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <950000>;
+			required-opps = <&cci_opp_12>;
+		};
+
+		opp-1866000000 {
+			opp-hz = /bits/ 64 <1866000000>;
+			opp-microvolt = <981250>;
+			required-opps = <&cci_opp_13>;
+		};
+
+		opp-1933000000 {
+			opp-hz = /bits/ 64 <1933000000>;
+			opp-microvolt = <1006250>;
+			required-opps = <&cci_opp_14>;
+		};
+
+		opp-2000000000 {
+			opp-hz = /bits/ 64 <2000000000>;
+			opp-microvolt = <1031250>;
+			required-opps = <&cci_opp_15>;
+		};
+	};
+
+	cluster1_opp: opp-table-cluster1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-774000000 {
+			opp-hz = /bits/ 64 <774000000>;
+			opp-microvolt = <675000>;
+			required-opps = <&cci_opp_0>;
+		};
+
+		opp-835000000 {
+			opp-hz = /bits/ 64 <835000000>;
+			opp-microvolt = <693750>;
+			required-opps = <&cci_opp_1>;
+		};
+
+		opp-919000000 {
+			opp-hz = /bits/ 64 <919000000>;
+			opp-microvolt = <718750>;
+			required-opps = <&cci_opp_2>;
+		};
+
+		opp-1002000000 {
+			opp-hz = /bits/ 64 <1002000000>;
+			opp-microvolt = <743750>;
+			required-opps = <&cci_opp_3>;
+		};
+
+		opp-1085000000 {
+			opp-hz = /bits/ 64 <1085000000>;
+			opp-microvolt = <775000>;
+			required-opps = <&cci_opp_4>;
+		};
+
+		opp-1169000000 {
+			opp-hz = /bits/ 64 <1169000000>;
+			opp-microvolt = <800000>;
+			required-opps = <&cci_opp_5>;
+		};
+
+		opp-1308000000 {
+			opp-hz = /bits/ 64 <1308000000>;
+			opp-microvolt = <843750>;
+			required-opps = <&cci_opp_6>;
+		};
+
+		opp-1419000000 {
+			opp-hz = /bits/ 64 <1419000000>;
+			opp-microvolt = <875000>;
+			required-opps = <&cci_opp_7>;
+		};
+
+		opp-1530000000 {
+			opp-hz = /bits/ 64 <1530000000>;
+			opp-microvolt = <912500>;
+			required-opps = <&cci_opp_8>;
+		};
+
+		opp-1670000000 {
+			opp-hz = /bits/ 64 <1670000000>;
+			opp-microvolt = <956250>;
+			required-opps = <&cci_opp_9>;
+		};
+
+		opp-1733000000 {
+			opp-hz = /bits/ 64 <1733000000>;
+			opp-microvolt = <981250>;
+			required-opps = <&cci_opp_10>;
+		};
+
+		opp-1796000000 {
+			opp-hz = /bits/ 64 <1796000000>;
+			opp-microvolt = <1012500>;
+			required-opps = <&cci_opp_11>;
+		};
+
+		opp-1860000000 {
+			opp-hz = /bits/ 64 <1860000000>;
+			opp-microvolt = <1037500>;
+			required-opps = <&cci_opp_12>;
+		};
+
+		opp-1923000000 {
+			opp-hz = /bits/ 64 <1923000000>;
+			opp-microvolt = <1062500>;
+			required-opps = <&cci_opp_13>;
+		};
+
+		cluster1_opp_14: opp-1986000000 {
+			opp-hz = /bits/ 64 <1986000000>;
+			opp-microvolt = <1093750>;
+			required-opps = <&cci_opp_14>;
+		};
+
+		cluster1_opp_15: opp-2050000000 {
+			opp-hz = /bits/ 64 <2050000000>;
+			opp-microvolt = <1118750>;
+			required-opps = <&cci_opp_15>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+
+				core6 {
+					cpu = <&cpu6>;
+				};
+
+				core7 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x000>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			capacity-dmips-mhz = <382>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			capacity-dmips-mhz = <382>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			capacity-dmips-mhz = <382>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			capacity-dmips-mhz = <382>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x400>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			capacity-dmips-mhz = <382>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x500>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			capacity-dmips-mhz = <382>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x600>;
+			enable-method = "psci";
+			clock-frequency = <2050000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_BL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster1_opp>;
+			dynamic-power-coefficient = <335>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x700>;
+			enable-method = "psci";
+			clock-frequency = <2050000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_BL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster1_opp>;
+			dynamic-power-coefficient = <335>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_ret_l: cpu-retention-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010001>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <100>;
+				min-residency-us = <1600>;
+			};
+
+			cpu_ret_b: cpu-retention-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010001>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <100>;
+				min-residency-us = <1400>;
+			};
+
+			cpu_off_l: cpu-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010001>;
+				local-timer-stop;
+				entry-latency-us = <100>;
+				exit-latency-us = <250>;
+				min-residency-us = <2100>;
+			};
+
+			cpu_off_b: cpu-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010001>;
+				local-timer-stop;
+				entry-latency-us = <100>;
+				exit-latency-us = <250>;
+				min-residency-us = <1900>;
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-unified;
+		};
+	};
+
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-299000000 {
+			opp-hz = /bits/ 64 <299000000>;
+			opp-microvolt = <612500>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-332000000 {
+			opp-hz = /bits/ 64 <332000000>;
+			opp-microvolt = <625000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-366000000 {
+			opp-hz = /bits/ 64 <366000000>;
+			opp-microvolt = <637500>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <643750>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-434000000 {
+			opp-hz = /bits/ 64 <434000000>;
+			opp-microvolt = <656250>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-484000000 {
+			opp-hz = /bits/ 64 <484000000>;
+			opp-microvolt = <668750>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-535000000 {
+			opp-hz = /bits/ 64 <535000000>;
+			opp-microvolt = <687500>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-586000000 {
+			opp-hz = /bits/ 64 <586000000>;
+			opp-microvolt = <700000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-637000000 {
+			opp-hz = /bits/ 64 <637000000>;
+			opp-microvolt = <712500>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-690000000 {
+			opp-hz = /bits/ 64 <690000000>;
+			opp-microvolt = <737500>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-743000000 {
+			opp-hz = /bits/ 64 <743000000>;
+			opp-microvolt = <756250>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-796000000 {
+			opp-hz = /bits/ 64 <796000000>;
+			opp-microvolt = <781250>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-850000000 {
+			opp-hz = /bits/ 64 <850000000>;
+			opp-microvolt = <800000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-900000000-3 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0xcf>;
+		};
+
+		opp-900000000-4 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <837500>;
+			opp-supported-hw = <0x10>;
+		};
+
+		opp-900000000-5 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <825000>;
+			opp-supported-hw = <0x20>;
+		};
+
+		opp-950000000-3 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <900000>;
+			opp-supported-hw = <0xcf>;
+		};
+
+		opp-950000000-4 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <875000>;
+			opp-supported-hw = <0x10>;
+		};
+
+		opp-950000000-5 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x20>;
+		};
+
+		opp-1000000000-3 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <950000>;
+			opp-supported-hw = <0xcf>;
+		};
+
+		opp-1000000000-4 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <912500>;
+			opp-supported-hw = <0x10>;
+		};
+
+		opp-1000000000-5 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <875000>;
+			opp-supported-hw = <0x20>;
+		};
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-a76 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		dma-ranges = <0x0 0x0 0x0 0x0 0x4 0x0>;
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			#redistributor-regions = <1>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c040000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+		};
+
+		mcusys: syscon@c53a000 {
+			compatible = "mediatek,mt8186-mcusys", "syscon";
+			reg = <0 0xc53a000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8186-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg_ao: syscon@10001000 {
+			compatible = "mediatek,mt8186-infracfg_ao", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8186-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8186-pinctrl";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x10002000 0 0x0200>,
+			      <0 0x10002200 0 0x0200>,
+			      <0 0x10002400 0 0x0200>,
+			      <0 0x10002600 0 0x0200>,
+			      <0 0x10002a00 0 0x0200>,
+			      <0 0x10002c00 0 0x0200>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "iocfg0", "iocfg_lt", "iocfg_lm", "iocfg_lb",
+				    "iocfg_bl", "iocfg_rb", "iocfg_rt", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 185>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
+			#interrupt-cells = <2>;
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8186-scpsys", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8186-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domain of the SoC */
+				mfg0: power-domain@MT8186_POWER_DOMAIN_MFG0 {
+					reg = <MT8186_POWER_DOMAIN_MFG0>;
+					clocks = <&topckgen CLK_TOP_MFG>;
+					clock-names = "mfg00";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					mfg1: power-domain@MT8186_POWER_DOMAIN_MFG1 {
+						reg = <MT8186_POWER_DOMAIN_MFG1>;
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8186_POWER_DOMAIN_MFG2 {
+							reg = <MT8186_POWER_DOMAIN_MFG2>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8186_POWER_DOMAIN_MFG3 {
+							reg = <MT8186_POWER_DOMAIN_MFG3>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8186_POWER_DOMAIN_CSIRX_TOP {
+					reg = <MT8186_POWER_DOMAIN_CSIRX_TOP>;
+					clocks = <&topckgen CLK_TOP_SENINF>,
+						 <&topckgen CLK_TOP_SENINF1>;
+					clock-names = "subsys-csirx-top0",
+						      "subsys-csirx-top1";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8186_POWER_DOMAIN_SSUSB {
+					reg = <MT8186_POWER_DOMAIN_SSUSB>;
+					clocks = <&topckgen CLK_TOP_USB_TOP>,
+						 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>;
+					clock-names = "sys_ck", "ref_ck";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8186_POWER_DOMAIN_SSUSB_P1 {
+					reg = <MT8186_POWER_DOMAIN_SSUSB_P1>;
+					clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
+						 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>;
+					clock-names = "sys_ck", "ref_ck";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8186_POWER_DOMAIN_ADSP_AO {
+					reg = <MT8186_POWER_DOMAIN_ADSP_AO>;
+					clocks = <&topckgen CLK_TOP_AUDIODSP>,
+						 <&topckgen CLK_TOP_ADSP_BUS>;
+					clock-names = "audioadsp",
+						      "subsys-adsp-bus";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8186_POWER_DOMAIN_ADSP_INFRA {
+						reg = <MT8186_POWER_DOMAIN_ADSP_INFRA>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8186_POWER_DOMAIN_ADSP_TOP {
+							reg = <MT8186_POWER_DOMAIN_ADSP_TOP>;
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8186_POWER_DOMAIN_CONN_ON {
+					reg = <MT8186_POWER_DOMAIN_CONN_ON>;
+					mediatek,infracfg = <&infracfg_ao>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8186_POWER_DOMAIN_DIS {
+					reg = <MT8186_POWER_DOMAIN_DIS>;
+					clocks = <&topckgen CLK_TOP_DISP>,
+						 <&topckgen CLK_TOP_MDP>,
+						 <&mmsys CLK_MM_SMI_INFRA>,
+						 <&mmsys CLK_MM_SMI_COMMON>,
+						 <&mmsys CLK_MM_SMI_GALS>,
+						 <&mmsys CLK_MM_SMI_IOMMU>;
+					clock-names = "disp", "mdp",
+						      "subsys-smi-infra",
+						      "subsys-smi-common",
+						      "subsys-smi-gals",
+						      "subsys-smi-iommu";
+					mediatek,infracfg = <&infracfg_ao>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8186_POWER_DOMAIN_VDEC {
+						reg = <MT8186_POWER_DOMAIN_VDEC>;
+						clocks = <&topckgen CLK_TOP_VDEC>,
+							 <&vdecsys CLK_VDEC_LARB1_CKEN>;
+						clock-names = "vdec0", "larb";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8186_POWER_DOMAIN_CAM {
+						reg = <MT8186_POWER_DOMAIN_CAM>;
+						clocks = <&topckgen CLK_TOP_SENINF>,
+							 <&topckgen CLK_TOP_SENINF1>,
+							 <&topckgen CLK_TOP_SENINF2>,
+							 <&topckgen CLK_TOP_SENINF3>,
+							 <&camsys CLK_CAM2MM_GALS>,
+							 <&topckgen CLK_TOP_CAMTM>,
+							 <&topckgen CLK_TOP_CAM>;
+						clock-names = "cam0", "cam1", "cam2",
+							      "cam3", "gals",
+							      "subsys-cam-tm",
+							      "subsys-cam-top";
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8186_POWER_DOMAIN_CAM_RAWB {
+							reg = <MT8186_POWER_DOMAIN_CAM_RAWB>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8186_POWER_DOMAIN_CAM_RAWA {
+							reg = <MT8186_POWER_DOMAIN_CAM_RAWA>;
+							#power-domain-cells = <0>;
+						};
+					};
+
+					power-domain@MT8186_POWER_DOMAIN_IMG {
+						reg = <MT8186_POWER_DOMAIN_IMG>;
+						clocks = <&imgsys1 CLK_IMG1_GALS_IMG1>,
+							 <&topckgen CLK_TOP_IMG1>;
+						clock-names = "gals", "subsys-img-top";
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8186_POWER_DOMAIN_IMG2 {
+							reg = <MT8186_POWER_DOMAIN_IMG2>;
+							#power-domain-cells = <0>;
+						};
+					};
+
+					power-domain@MT8186_POWER_DOMAIN_IPE {
+						reg = <MT8186_POWER_DOMAIN_IPE>;
+						clocks = <&topckgen CLK_TOP_IPE>,
+							 <&ipesys CLK_IPE_LARB19>,
+							 <&ipesys CLK_IPE_LARB20>,
+							 <&ipesys CLK_IPE_SMI_SUBCOM>,
+							 <&ipesys CLK_IPE_GALS_IPE>;
+						clock-names = "subsys-ipe-top",
+							      "subsys-ipe-larb0",
+							      "subsys-ipe-larb1",
+							      "subsys-ipe-smi",
+							      "subsys-ipe-gals";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8186_POWER_DOMAIN_VENC {
+						reg = <MT8186_POWER_DOMAIN_VENC>;
+						clocks = <&topckgen CLK_TOP_VENC>,
+							 <&vencsys CLK_VENC_CKE1_VENC>;
+						clock-names = "venc0", "subsys-larb";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8186_POWER_DOMAIN_WPE {
+						reg = <MT8186_POWER_DOMAIN_WPE>;
+						clocks = <&topckgen CLK_TOP_WPE>,
+							 <&wpesys CLK_WPE_SMI_LARB8_CK_EN>,
+							 <&wpesys CLK_WPE_SMI_LARB8_PCLK_EN>;
+						clock-names = "wpe0",
+							      "subsys-larb-ck",
+							      "subsys-larb-pclk";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+				};
+			};
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8186-wdt";
+			mediatek,disable-extrst;
+			reg = <0 0x10007000 0 0x1000>;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8186-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pwrap: pwrap@1000d000 {
+			compatible = "mediatek,mt8186-pwrap", "syscon";
+			reg = <0 0x1000d000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>;
+			clock-names = "spi", "wrap";
+		};
+
+		spmi: spmi@10015000 {
+			compatible = "mediatek,mt8186-spmi", "mediatek,mt8195-spmi";
+			reg = <0 0x10015000 0 0x000e00>, <0 0x1001B000 0 0x000100>;
+			reg-names = "pmif", "spmimst";
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>,
+				 <&topckgen CLK_TOP_SPMI_MST>;
+			clock-names = "pmif_sys_ck", "pmif_tmr_ck", "spmimst_clk_mux";
+			assigned-clocks = <&topckgen CLK_TOP_SPMI_MST>;
+			assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>;
+			interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		systimer: timer@10017000 {
+			compatible = "mediatek,mt8186-timer",
+				     "mediatek,mt6765-timer";
+			reg = <0 0x10017000 0 0x1000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk13m>;
+		};
+
+		gce: mailbox@1022c000 {
+			compatible = "mediatek,mt8186-gce";
+			reg = <0 0X1022c000 0 0x4000>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_GCE>;
+			clock-names = "gce";
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+		};
+
+		scp: scp@10500000 {
+			compatible = "mediatek,mt8186-scp";
+			reg = <0 0x10500000 0 0x40000>,
+			      <0 0x105c0000 0 0x19080>;
+			reg-names = "sram", "cfg";
+			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		adsp: adsp@10680000 {
+			compatible = "mediatek,mt8186-dsp";
+			reg = <0 0x10680000 0 0x2000>, <0 0x10800000 0 0x100000>,
+			      <0 0x1068b000 0 0x100>, <0 0x1068f000 0 0x1000>;
+			reg-names = "cfg", "sram", "sec", "bus";
+			clocks = <&topckgen CLK_TOP_AUDIODSP>, <&topckgen CLK_TOP_ADSP_BUS>;
+			clock-names = "audiodsp", "adsp_bus";
+			assigned-clocks = <&topckgen CLK_TOP_AUDIODSP>,
+					  <&topckgen CLK_TOP_ADSP_BUS>;
+			assigned-clock-parents = <&clk26m>, <&topckgen CLK_TOP_MAINPLL_D2_D2>;
+			mbox-names = "rx", "tx";
+			mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_ADSP_TOP>;
+			status = "disabled";
+		};
+
+		adsp_mailbox0: mailbox@10686100 {
+			compatible = "mediatek,mt8186-adsp-mbox";
+			#mbox-cells = <0>;
+			reg = <0 0x10686100 0 0x1000>;
+			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		adsp_mailbox1: mailbox@10687100 {
+			compatible = "mediatek,mt8186-adsp-mbox";
+			#mbox-cells = <0>;
+			reg = <0 0x10687100 0 0x1000>;
+			interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		nor_flash: spi@11000000 {
+			compatible = "mediatek,mt8186-nor";
+			reg = <0 0x11000000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_SPINOR>,
+				 <&infracfg_ao CLK_INFRA_AO_SPINOR>,
+				 <&infracfg_ao CLK_INFRA_AO_FLASHIF_133M>,
+				 <&infracfg_ao CLK_INFRA_AO_FLASHIF_66M>;
+			clock-names = "spi", "sf", "axi", "axi_s";
+			assigned-clocks = <&topckgen CLK_TOP_SPINOR>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D3_D8>;
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		auxadc: adc@11001000 {
+			compatible = "mediatek,mt8186-auxadc", "mediatek,mt8173-auxadc";
+			reg = <0 0x11001000 0 0x1000>;
+			#io-channel-cells = <1>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>;
+			clock-names = "main";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8186-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x1000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt8186-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		i2c0: i2c@11007000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11007000 0 0x1000>,
+			      <0 0x10200100 0 0x100>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C0>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11008000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11008000 0 0x1000>,
+			      <0 0x10200200 0 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C1>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11009000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11009000 0 0x1000>,
+			      <0 0x10200300 0 0x180>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C2>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@1100f000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x1100f000 0 0x1000>,
+			      <0 0x10200480 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C3>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11011000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11011000 0 0x1000>,
+			      <0 0x10200580 0 0x180>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C4>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@11016000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11016000 0 0x1000>,
+			      <0 0x10200700 0 0x100>;
+			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C5>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@1100d000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x1100d000 0 0x1000>,
+			      <0 0x10200800 0 0x100>;
+			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C6>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@11004000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11004000 0 0x1000>,
+			      <0 0x10200900 0 0x180>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C7>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c8: i2c@11005000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11005000 0 0x1000>,
+			      <0 0x10200A80 0 0x180>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C8>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		lvts: thermal-sensor@1100b000 {
+			compatible = "mediatek,mt8186-lvts";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			resets = <&infracfg_ao MT8186_INFRA_THERMAL_CTRL_RST>;
+			nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+			nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
+			#thermal-sensor-cells = <1>;
+		};
+
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8186-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>, <&lvts_efuse_data1>;
+			nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+			resets = <&infracfg_ao MT8186_INFRA_PTP_CTRL_RST>;
+			reset-names = "svs_rst";
+		};
+
+		pwm0: pwm@1100e000 {
+			compatible = "mediatek,mt8186-disp-pwm", "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100e000 0 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM>,
+				 <&infracfg_ao CLK_INFRA_AO_DISP_PWM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		spi1: spi@11010000 {
+			compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11010000 0 0x1000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI1>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi2: spi@11012000 {
+			compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11012000 0 0x1000>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI2>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi3: spi@11013000 {
+			compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11013000 0 0x1000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI3>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi4: spi@11014000 {
+			compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11014000 0 0x1000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI4>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi5: spi@11015000 {
+			compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11015000 0 0x1000>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI5>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		imp_iic_wrap: clock-controller@11017000 {
+			compatible = "mediatek,mt8186-imp_iic_wrap";
+			reg = <0 0x11017000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		uart2: serial@11018000 {
+			compatible = "mediatek,mt8186-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11018000 0 0x1000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		i2c9: i2c@11019000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11019000 0 0x1000>,
+			      <0 0x10200c00 0 0x180>;
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C9>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		afe: audio-controller@11210000 {
+			compatible = "mediatek,mt8186-sound";
+			reg = <0 0x11210000 0 0x2000>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_AUDIO>,
+				 <&infracfg_ao CLK_INFRA_AO_AUDIO_26M_BCLK>,
+				 <&topckgen CLK_TOP_AUDIO>,
+				 <&topckgen CLK_TOP_AUD_INTBUS>,
+				 <&topckgen CLK_TOP_MAINPLL_D2_D4>,
+				 <&topckgen CLK_TOP_AUD_1>,
+				 <&apmixedsys CLK_APMIXED_APLL1>,
+				 <&topckgen CLK_TOP_AUD_2>,
+				 <&apmixedsys CLK_APMIXED_APLL2>,
+				 <&topckgen CLK_TOP_AUD_ENGEN1>,
+				 <&topckgen CLK_TOP_APLL1_D8>,
+				 <&topckgen CLK_TOP_AUD_ENGEN2>,
+				 <&topckgen CLK_TOP_APLL2_D8>,
+				 <&topckgen CLK_TOP_APLL_I2S0_MCK_SEL>,
+				 <&topckgen CLK_TOP_APLL_I2S1_MCK_SEL>,
+				 <&topckgen CLK_TOP_APLL_I2S2_MCK_SEL>,
+				 <&topckgen CLK_TOP_APLL_I2S4_MCK_SEL>,
+				 <&topckgen CLK_TOP_APLL_TDMOUT_MCK_SEL>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV0>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV1>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV2>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV4>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV_TDMOUT_M>,
+				 <&topckgen CLK_TOP_AUDIO_H>,
+				 <&clk26m>;
+			clock-names = "aud_infra_clk",
+				      "mtkaif_26m_clk",
+				      "top_mux_audio",
+				      "top_mux_audio_int",
+				      "top_mainpll_d2_d4",
+				      "top_mux_aud_1",
+				      "top_apll1_ck",
+				      "top_mux_aud_2",
+				      "top_apll2_ck",
+				      "top_mux_aud_eng1",
+				      "top_apll1_d8",
+				      "top_mux_aud_eng2",
+				      "top_apll2_d8",
+				      "top_i2s0_m_sel",
+				      "top_i2s1_m_sel",
+				      "top_i2s2_m_sel",
+				      "top_i2s4_m_sel",
+				      "top_tdm_m_sel",
+				      "top_apll12_div0",
+				      "top_apll12_div1",
+				      "top_apll12_div2",
+				      "top_apll12_div4",
+				      "top_apll12_div_tdm",
+				      "top_mux_audio_h",
+				      "top_clk26m_clk";
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,apmixedsys = <&apmixedsys>;
+			mediatek,infracfg = <&infracfg_ao>;
+			mediatek,topckgen = <&topckgen>;
+			resets = <&watchdog MT8186_TOPRGU_AUDIO_SW_RST>;
+			reset-names = "audiosys";
+			status = "disabled";
+		};
+
+		ssusb0: usb@11201000 {
+			compatible = "mediatek,mt8186-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2dff>, <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			clocks = <&topckgen CLK_TOP_USB_TOP>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_HCLK>,
+				 <&infracfg_ao CLK_INFRA_AO_ICUSB>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port0 PHY_TYPE_USB2>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x420 2>;
+			status = "disabled";
+
+			usb_host0: usb@11200000 {
+				compatible = "mediatek,mt8186-xhci", "mediatek,mtk-xhci";
+				reg = <0 0x11200000 0 0x1000>;
+				reg-names = "mac";
+				clocks = <&topckgen CLK_TOP_USB_TOP>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_HCLK>,
+					 <&infracfg_ao CLK_INFRA_AO_ICUSB>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>;
+				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+				interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>;
+				status = "disabled";
+			};
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8186-mmc",
+				     "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x10000>,
+			      <0 0x11cd0000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDCFDE>;
+			clock-names = "source", "hclk", "source_cg", "crypto";
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_MSDC50_0>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_MSDCPLL>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8186-mmc",
+				     "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11c90000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+			status = "disabled";
+		};
+
+		ssusb1: usb@11281000 {
+			compatible = "mediatek,mt8186-mtu3", "mediatek,mtu3";
+			reg = <0 0x11281000 0 0x2dff>, <0 0x11283e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_HCLK>,
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB_P1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x424 2>;
+			status = "disabled";
+
+			usb_host1: usb@11280000 {
+				compatible = "mediatek,mt8186-xhci", "mediatek,mtk-xhci";
+				reg = <0 0x11280000 0 0x1000>;
+				reg-names = "mac";
+				clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_HCLK>,
+					 <&clk26m>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>;
+				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck","xhci_ck";
+				interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>;
+				status = "disabled";
+			};
+		};
+
+		u3phy0: t-phy@11c80000 {
+			compatible = "mediatek,mt8186-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11c80000 0x1000>;
+			status = "disabled";
+
+			u2port1: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			u3port1: usb-phy@700 {
+				reg = <0x700 0x900>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		u3phy1: t-phy@11ca0000 {
+			compatible = "mediatek,mt8186-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11ca0000 0x1000>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				mediatek,discth = <0x8>;
+			};
+		};
+
+		efuse: efuse@11cb0000 {
+			compatible = "mediatek,mt8186-efuse", "mediatek,efuse";
+			reg = <0 0x11cb0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			lvts_efuse_data1: lvts1-calib@1cc {
+				reg = <0x1cc 0x14>;
+			};
+
+			lvts_efuse_data2: lvts2-calib@2f8 {
+				reg = <0x2f8 0x14>;
+			};
+
+			svs_calibration: calib@550 {
+				reg = <0x550 0x50>;
+			};
+
+			gpu_speedbin: gpu-speedbin@59c {
+				reg = <0x59c 0x4>;
+				bits = <0 3>;
+			};
+
+			socinfo-data1@7a0 {
+				reg = <0x7a0 0x4>;
+			};
+		};
+
+		mipi_tx0: dsi-phy@11cc0000 {
+			compatible = "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11cc0000 0 0x1000>;
+			clocks = <&clk26m>;
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			clock-output-names = "mipi_tx0_pll";
+			status = "disabled";
+		};
+
+		mfgsys: clock-controller@13000000 {
+			compatible = "mediatek,mt8186-mfgsys";
+			reg = <0 0x13000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		gpu: gpu@13040000 {
+			compatible = "mediatek,mt8186-mali",
+				     "arm,mali-bifrost";
+			reg = <0 0x13040000 0 0x4000>;
+
+			clocks = <&mfgsys CLK_MFG_BG3D>;
+			interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "job", "mmu", "gpu";
+			power-domains = <&spm MT8186_POWER_DOMAIN_MFG2>,
+					<&spm MT8186_POWER_DOMAIN_MFG3>;
+			power-domain-names = "core0", "core1";
+			#cooling-cells = <2>;
+			nvmem-cells = <&gpu_speedbin>;
+			nvmem-cell-names = "speed-bin";
+			operating-points-v2 = <&gpu_opp_table>;
+			dynamic-power-coefficient = <4687>;
+			status = "disabled";
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt8186-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+		};
+
+		mutex: mutex@14001000 {
+			compatible = "mediatek,mt8186-disp-mutex";
+			reg = <0 0x14001000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_MUTEX0>;
+			interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>,
+					      <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		smi_common: smi@14002000 {
+			compatible = "mediatek,mt8186-smi-common";
+			reg = <0 0x14002000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>, <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_GALS>, <&mmsys CLK_MM_SMI_GALS>;
+			clock-names = "apb", "smi", "gals0", "gals1";
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		larb0: smi@14003000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x14003000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_COMMON>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <0>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		larb1: smi@14004000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x14004000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_COMMON>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <1>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		ovl0: ovl@14005000 {
+			compatible = "mediatek,mt8186-disp-ovl", "mediatek,mt8192-disp-ovl";
+			reg = <0 0x14005000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0>;
+			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L0_OVL_RDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		ovl_2l0: ovl@14006000 {
+			compatible = "mediatek,mt8186-disp-ovl-2l", "mediatek,mt8192-disp-ovl-2l";
+			reg = <0 0x14006000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L1_OVL_2L_RDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		rdma0: rdma@14007000 {
+			compatible = "mediatek,mt8186-disp-rdma", "mediatek,mt8183-disp-rdma";
+			reg = <0 0x14007000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L1_DISP_RDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x7000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		color: color@14009000 {
+			compatible = "mediatek,mt8186-disp-color", "mediatek,mt8173-disp-color";
+			reg = <0 0x14009000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		dpi: dpi@1400a000 {
+			compatible = "mediatek,mt8186-dpi";
+			reg = <0 0x1400a000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_DPI>,
+				 <&mmsys CLK_MM_DISP_DPI>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL>;
+			clock-names = "pixel", "engine", "pll";
+			assigned-clocks = <&topckgen CLK_TOP_DPI>;
+			assigned-clock-parents = <&topckgen CLK_TOP_TVDPLL_D2>;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_LOW 0>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+			status = "disabled";
+
+			port {
+				dpi_out: endpoint { };
+			};
+		};
+
+		ccorr: ccorr@1400b000 {
+			compatible = "mediatek,mt8186-disp-ccorr", "mediatek,mt8192-disp-ccorr";
+			reg = <0 0x1400b000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		aal: aal@1400c000 {
+			compatible = "mediatek,mt8186-disp-aal", "mediatek,mt8183-disp-aal";
+			reg = <0 0x1400c000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_AAL0>;
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		gamma: gamma@1400d000 {
+			compatible = "mediatek,mt8186-disp-gamma", "mediatek,mt8183-disp-gamma";
+			reg = <0 0x1400d000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+			interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		postmask: postmask@1400e000 {
+			compatible = "mediatek,mt8186-disp-postmask",
+				     "mediatek,mt8192-disp-postmask";
+			reg = <0 0x1400e000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_POSTMASK0>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		dither: dither@1400f000 {
+			compatible = "mediatek,mt8186-disp-dither", "mediatek,mt8183-disp-dither";
+			reg = <0 0x1400f000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		dsi0: dsi@14013000 {
+			compatible = "mediatek,mt8186-dsi";
+			reg = <0 0x14013000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DSI0>,
+				 <&mmsys CLK_MM_DSI0_DSI_CK_DOMAIN>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+			resets = <&mmsys MT8186_MMSYS_SW0_RST_B_DISP_DSI0>;
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			status = "disabled";
+
+			port {
+				dsi_out: endpoint { };
+			};
+		};
+
+		iommu_mm: iommu@14016000 {
+			compatible = "mediatek,mt8186-iommu-mm";
+			reg = <0 0x14016000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_IOMMU>;
+			clock-names = "bclk";
+			interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,larbs = <&larb0 &larb1 &larb2 &larb4
+					  &larb7 &larb8 &larb9 &larb11
+					  &larb13 &larb14 &larb16 &larb17
+					  &larb19 &larb20>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+			#iommu-cells = <1>;
+		};
+
+		rdma1: rdma@1401f000 {
+			compatible = "mediatek,mt8186-disp-rdma", "mediatek,mt8183-disp-rdma";
+			reg = <0 0x1401f000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L1_DISP_RDMA1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xf000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		wpesys: clock-controller@14020000 {
+			compatible = "mediatek,mt8186-wpesys";
+			reg = <0 0x14020000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb8: smi@14023000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x14023000 0 0x1000>;
+			clocks = <&wpesys CLK_WPE_SMI_LARB8_CK_EN>,
+				 <&wpesys CLK_WPE_SMI_LARB8_CK_EN>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <8>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_WPE>;
+		};
+
+		imgsys1: clock-controller@15020000 {
+			compatible = "mediatek,mt8186-imgsys1";
+			reg = <0 0x15020000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb9: smi@1502e000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1502e000 0 0x1000>;
+			clocks = <&imgsys1 CLK_IMG1_GALS_IMG1>,
+				 <&imgsys1 CLK_IMG1_LARB9_IMG1>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <9>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_IMG>;
+		};
+
+		imgsys2: clock-controller@15820000 {
+			compatible = "mediatek,mt8186-imgsys2";
+			reg = <0 0x15820000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb11: smi@1582e000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1582e000 0 0x1000>;
+			clocks = <&imgsys1 CLK_IMG1_LARB9_IMG1>,
+				 <&imgsys2 CLK_IMG2_LARB9_IMG2>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <11>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_IMG2>;
+		};
+
+		video_decoder: video-decoder@16000000 {
+			compatible = "mediatek,mt8186-vcodec-dec";
+			reg = <0 0x16000000 0 0x1000>;
+			ranges;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
+			iommus = <&iommu_mm IOMMU_PORT_L4_HW_VDEC_MC_EXT>;
+			mediatek,scp = <&scp>;
+
+			vcodec_core: video-codec@16025000 {
+				compatible = "mediatek,mtk-vcodec-core";
+				reg = <0 0x16025000 0 0x1000>;
+				interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&iommu_mm IOMMU_PORT_L4_HW_VDEC_MC_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_UFO_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_PP_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_PRED_RD_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_PRED_WR_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_PPWRAP_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_TILE_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_VLD_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_VLD2_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_AVC_MV_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_UFO_ENC_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_RG_CTRL_DMA_EXT>;
+				clocks = <&topckgen CLK_TOP_VDEC>,
+					 <&vdecsys CLK_VDEC_CKEN>,
+					 <&vdecsys CLK_VDEC_LARB1_CKEN>,
+					 <&topckgen CLK_TOP_UNIVPLL_D3>;
+				clock-names = "vdec-sel", "vdec-soc-vdec", "vdec", "vdec-top";
+				assigned-clocks = <&topckgen CLK_TOP_VDEC>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D3>;
+				power-domains = <&spm MT8186_POWER_DOMAIN_VDEC>;
+			};
+		};
+
+		larb4: smi@1602e000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1602e000 0 0x1000>;
+			clocks = <&vdecsys CLK_VDEC_LARB1_CKEN>,
+				 <&vdecsys CLK_VDEC_LARB1_CKEN>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <4>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_VDEC>;
+		};
+
+		vdecsys: clock-controller@1602f000 {
+			compatible = "mediatek,mt8186-vdecsys";
+			reg = <0 0x1602f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@17000000 {
+			compatible = "mediatek,mt8186-vencsys";
+			reg = <0 0x17000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb7: smi@17010000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x17010000 0 0x1000>;
+			clocks = <&vencsys CLK_VENC_CKE1_VENC>,
+				 <&vencsys CLK_VENC_CKE1_VENC>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <7>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_VENC>;
+		};
+
+		venc: video-encoder@17020000 {
+			compatible = "mediatek,mt8186-vcodec-enc", "mediatek,mt8183-vcodec-enc";
+			reg = <0 0x17020000 0 0x2000>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L7_VENC_RCPU>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_REC>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_BSDMA>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_SV_COMV>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_RD_COMV>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_CUR_LUMA>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_CUR_CHROMA>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_REF_LUMA>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_REF_CHROMA>;
+			clocks = <&vencsys CLK_VENC_CKE1_VENC>;
+			clock-names = "venc_sel";
+			assigned-clocks = <&topckgen CLK_TOP_VENC>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D3>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_VENC>;
+			mediatek,scp = <&scp>;
+		};
+
+		jpgenc: jpeg-encoder@17030000 {
+			compatible = "mediatek,mt8186-jpgenc", "mediatek,mtk-jpgenc";
+			reg = <0 0x17030000 0 0x10000>;
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vencsys CLK_VENC_CKE2_JPGENC>;
+			clock-names = "jpgenc";
+			iommus = <&iommu_mm IOMMU_PORT_L7_JPGENC_Y_RDMA>,
+				 <&iommu_mm IOMMU_PORT_L7_JPGENC_C_RDMA>,
+				 <&iommu_mm IOMMU_PORT_L7_JPGENC_Q_TABLE>,
+				 <&iommu_mm IOMMU_PORT_L7_JPGENC_BSDMA>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_VENC>;
+		};
+
+		camsys: clock-controller@1a000000 {
+			compatible = "mediatek,mt8186-camsys";
+			reg = <0 0x1a000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb13: smi@1a001000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1a001000 0 0x1000>;
+			clocks = <&camsys CLK_CAM2MM_GALS>, <&camsys CLK_CAM_LARB13>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <13>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_CAM>;
+		};
+
+		larb14: smi@1a002000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1a002000 0 0x1000>;
+			clocks = <&camsys CLK_CAM2MM_GALS>, <&camsys CLK_CAM_LARB14>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <14>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_CAM>;
+		};
+
+		larb16: smi@1a00f000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1a00f000 0 0x1000>;
+			clocks = <&camsys CLK_CAM_LARB14>,
+				 <&camsys_rawa CLK_CAM_RAWA_LARBX_RAWA>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <16>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_CAM_RAWA>;
+		};
+
+		larb17: smi@1a010000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1a010000 0 0x1000>;
+			clocks = <&camsys CLK_CAM_LARB13>,
+				 <&camsys_rawb CLK_CAM_RAWB_LARBX_RAWB>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <17>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_CAM_RAWB>;
+		};
+
+		camsys_rawa: clock-controller@1a04f000 {
+			compatible = "mediatek,mt8186-camsys_rawa";
+			reg = <0 0x1a04f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawb: clock-controller@1a06f000 {
+			compatible = "mediatek,mt8186-camsys_rawb";
+			reg = <0 0x1a06f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mdpsys: clock-controller@1b000000 {
+			compatible = "mediatek,mt8186-mdpsys";
+			reg = <0 0x1b000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb2: smi@1b002000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1b002000 0 0x1000>;
+			clocks = <&mdpsys CLK_MDP_SMI0>, <&mdpsys CLK_MDP_SMI0>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <2>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		ipesys: clock-controller@1c000000 {
+			compatible = "mediatek,mt8186-ipesys";
+			reg = <0 0x1c000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb20: smi@1c00f000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1c00f000 0 0x1000>;
+			clocks = <&ipesys CLK_IPE_LARB20>, <&ipesys CLK_IPE_LARB20>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <20>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_IPE>;
+		};
+
+		larb19: smi@1c10f000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1c10f000 0 0x1000>;
+			clocks = <&ipesys CLK_IPE_LARB19>, <&ipesys CLK_IPE_LARB19>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <19>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_IPE>;
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		cpu-little0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <150>;
+			thermal-sensors = <&lvts MT8186_LITTLE_CPU0>;
+
+			trips {
+				cpu_little0_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_little0_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_little0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_little0_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-little1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <150>;
+			thermal-sensors = <&lvts MT8186_LITTLE_CPU1>;
+
+			trips {
+				cpu_little1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_little1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_little1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_little1_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-little2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <150>;
+			thermal-sensors = <&lvts MT8186_LITTLE_CPU2>;
+
+			trips {
+				cpu_little2_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_little2_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_little2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_little2_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cam-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts MT8186_CAM>;
+
+			trips {
+				cam_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cam_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nna-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts MT8186_NNA>;
+
+			trips {
+				nna_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				nna_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nna_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		adsp-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts MT8186_ADSP>;
+
+			trips {
+				adsp_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				adsp_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				adsp_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts MT8186_GPU>;
+
+			trips {
+				gpu_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpu_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-big0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&lvts MT8186_BIG_CPU0>;
+
+			trips {
+				cpu_big0_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_big0_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_big0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_big0_alert0>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-big1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&lvts MT8186_BIG_CPU1>;
+
+			trips {
+				cpu_big1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_big1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_big1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_big1_alert0>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
new file mode 100644
index 000000000000..f4c207d65b87
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8188.dtsi"
+#include "mt6359.dtsi"
+
+/ {
+	model = "MediaTek MT8188 evaluation board";
+	compatible = "mediatek,mt8188-evb", "mediatek,mt8188";
+
+	aliases {
+		serial0 = &uart0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		mmc0 = &mmc0;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem_reserved: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <8>;
+	hs400-ds-delay = <0x1481b>;
+	max-frequency = <200000000>;
+
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	non-removable;
+
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+
+	status = "okay";
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&nor_flash {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+	};
+};
+
+&pio {
+	adsp_uart_pins: adsp-uart-pins {
+		pins-tx-rx {
+			pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>,
+				 <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+				 <PINMUX_GPIO57__FUNC_B1_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+				 <PINMUX_GPIO59__FUNC_B1_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+				 <PINMUX_GPIO61__FUNC_B1_SCL3>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
+				 <PINMUX_GPIO63__FUNC_B1_SCL4>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
+				 <PINMUX_GPIO65__FUNC_B1_SCL5>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
+				 <PINMUX_GPIO67__FUNC_B1_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk-ds {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>,
+				 <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	nor_pins_default: nor-pins {
+		pins-io-ck {
+			pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>,
+				 <PINMUX_GPIO125__FUNC_O_SPINOR_CK>,
+				 <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>;
+			bias-pull-down;
+		};
+
+		pins-io-cs {
+			pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>,
+				 <PINMUX_GPIO129__FUNC_B0_SPINOR_IO2>,
+				 <PINMUX_GPIO130__FUNC_B0_SPINOR_IO3>;
+			bias-pull-up;
+		};
+	};
+
+	spi0_pins: spi0-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
+				 <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
+				 <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
+				 <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+				 <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+				 <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
+				 <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
+				 <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
+				 <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
+				 <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-rx-tx {
+			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
+			bias-pull-up;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp_cluster {
+	status = "okay";
+};
+
+&scp_c0 {
+	memory-region = <&scp_mem_reserved>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci1 {
+	status = "okay";
+};
+
+&xhci2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku0.dts
new file mode 100644
index 000000000000..79d6d12394b9
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku0.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku0 board";
+	compatible = "google,ciri-sku0", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "boe,nv110wum-l60", "himax,hx83102";
+};
+
+&sound {
+	compatible = "mediatek,mt8188-rt5682s";
+	model = "mt8188_m98390_5682";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"IN1P", "Headset Mic",
+		"Left Spk", "Front Left BE_OUT",
+		"Right Spk", "Front Right BE_OUT";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku1.dts
new file mode 100644
index 000000000000..ef5ea9d12b1d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku1.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku1 board";
+	compatible = "google,ciri-sku1", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "ivo,t109nw41", "himax,hx83102";
+};
+
+&i2c0 {
+	/delete-node/ audio-codec@1a;
+
+	es8326: audio-codec@19 {
+		compatible = "everest,es8326";
+		reg = <0x19>;
+		interrupts-extended = <&pio 108 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_codec_pins>;
+		#sound-dai-cells = <0>;
+		everest,jack-pol = [0e];
+		everest,interrupt-clk = [00];
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8188-es8326";
+	model = "mt8188_m98390_8326";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"MIC1", "Headset Mic",
+		"Left Spk", "Front Left BE_OUT",
+		"Right Spk", "Front Right BE_OUT";
+
+	dai-link-2 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+
+	dai-link-3 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku2.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku2.dts
new file mode 100644
index 000000000000..ef56786fc2be
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku2.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku2 board";
+	compatible = "google,ciri-sku2", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "boe,nv110wum-l60", "himax,hx83102";
+};
+
+&i2c0 {
+	/delete-node/ audio-codec@1a;
+
+	es8326: audio-codec@19 {
+		compatible = "everest,es8326";
+		reg = <0x19>;
+		interrupts-extended = <&pio 108 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_codec_pins>;
+		#sound-dai-cells = <0>;
+		everest,jack-pol = [0e];
+		everest,interrupt-clk = [00];
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8188-es8326";
+	model = "mt8188_m98390_8326";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"MIC1", "Headset Mic",
+		"Left Spk", "Front Left BE_OUT",
+		"Right Spk", "Front Right BE_OUT";
+
+	dai-link-2 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+
+	dai-link-3 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku3.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku3.dts
new file mode 100644
index 000000000000..524f7f0064c1
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku3.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku3 board";
+	compatible = "google,ciri-sku3", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "ivo,t109nw41", "himax,hx83102";
+};
+
+&sound {
+	compatible = "mediatek,mt8188-rt5682s";
+	model = "mt8188_m98390_5682";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"IN1P", "Headset Mic",
+		"Left Spk", "Front Left BE_OUT",
+		"Right Spk", "Front Right BE_OUT";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku4.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku4.dts
new file mode 100644
index 000000000000..ea953d7e1543
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku4.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku4 board (rev4)";
+	compatible = "google,ciri-sku4", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "boe,nv110wum-l60", "himax,hx83102";
+};
+
+&i2c0 {
+	/delete-node/ amplifier@38;
+	/delete-node/ amplifier@39;
+
+	tas2563: amplifier@4f {
+		compatible = "ti,tas2563", "ti,tas2781";
+		reg = <0x4f>, <0x4c>; /* left / right channel */
+		reset-gpios = <&pio 118 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8188-rt5682s";
+	model = "mt8188_tas2563_5682";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"IN1P", "Headset Mic";
+
+	dai-link-1 {
+		codec {
+			sound-dai = <&tas2563>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku5.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku5.dts
new file mode 100644
index 000000000000..bf87201ccf27
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku5.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku5 board (rev4)";
+	compatible = "google,ciri-sku5", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "ivo,t109nw41", "himax,hx83102";
+};
+
+&i2c0 {
+	/delete-node/ audio-codec@1a;
+	/delete-node/ amplifier@38;
+	/delete-node/ amplifier@39;
+
+	es8326: audio-codec@19 {
+		compatible = "everest,es8326";
+		reg = <0x19>;
+		interrupts-extended = <&pio 108 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_codec_pins>;
+		#sound-dai-cells = <0>;
+		everest,jack-pol = [0e];
+		everest,interrupt-clk = [00];
+	};
+
+	tas2563: amplifier@4f {
+		compatible = "ti,tas2563", "ti,tas2781";
+		reg = <0x4f>, <0x4c>; /* left / right channel */
+		reset-gpios = <&pio 118 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8188-es8326";
+	model = "mt8188_tas2563_8326";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"MIC1", "Headset Mic";
+
+	dai-link-1 {
+		codec {
+			sound-dai = <&tas2563>;
+		};
+	};
+
+	dai-link-2 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+
+	dai-link-3 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku6.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku6.dts
new file mode 100644
index 000000000000..17d7359dfb6a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku6.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku6 board (rev4)";
+	compatible = "google,ciri-sku6", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "boe,nv110wum-l60", "himax,hx83102";
+};
+
+&i2c0 {
+	/delete-node/ audio-codec@1a;
+	/delete-node/ amplifier@38;
+	/delete-node/ amplifier@39;
+
+	es8326: audio-codec@19 {
+		compatible = "everest,es8326";
+		reg = <0x19>;
+		interrupts-extended = <&pio 108 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_codec_pins>;
+		#sound-dai-cells = <0>;
+		everest,jack-pol = [0e];
+		everest,interrupt-clk = [00];
+	};
+
+	tas2563: amplifier@4f {
+		compatible = "ti,tas2563", "ti,tas2781";
+		reg = <0x4f>, <0x4c>; /* left / right channel */
+		reset-gpios = <&pio 118 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8188-es8326";
+	model = "mt8188_tas2563_8326";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"MIC1", "Headset Mic";
+
+	dai-link-1 {
+		codec {
+			sound-dai = <&tas2563>;
+		};
+	};
+
+	dai-link-2 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+
+	dai-link-3 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku7.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku7.dts
new file mode 100644
index 000000000000..825015b452d5
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku7.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku7 board (rev4)";
+	compatible = "google,ciri-sku7", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "ivo,t109nw41", "himax,hx83102";
+};
+
+&i2c0 {
+	/delete-node/ amplifier@38;
+	/delete-node/ amplifier@39;
+
+	tas2563: amplifier@4f {
+		compatible = "ti,tas2563", "ti,tas2781";
+		reg = <0x4f>, <0x4c>; /* left / right channel */
+		reset-gpios = <&pio 118 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8188-rt5682s";
+	model = "mt8188_tas2563_5682";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"IN1P", "Headset Mic";
+
+	dai-link-1 {
+		codec {
+			sound-dai = <&tas2563>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri.dtsi b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri.dtsi
new file mode 100644
index 000000000000..6815c435a57e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri.dtsi
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt.dtsi"
+
+&aud_etdm_hp_on {
+	pins-mclk {
+		pinmux = <PINMUX_GPIO114__FUNC_O_I2SO2_MCK>;
+	};
+};
+
+&aud_etdm_hp_off {
+	pins-mclk {
+		pinmux = <PINMUX_GPIO114__FUNC_B_GPIO114>;
+		bias-pull-down;
+		input-enable;
+	};
+};
+
+&i2c0 {
+	rt5682s: audio-codec@1a {
+		compatible = "realtek,rt5682s";
+		reg = <0x1a>;
+		interrupts-extended = <&pio 108 IRQ_TYPE_EDGE_BOTH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_codec_pins>;
+		#sound-dai-cells = <1>;
+
+		AVDD-supply = <&mt6359_vio18_ldo_reg>;
+		DBVDD-supply = <&mt6359_vio18_ldo_reg>;
+		LDO1-IN-supply = <&mt6359_vio18_ldo_reg>;
+		MICVDD-supply = <&pp3300_s3>;
+		realtek,jd-src = <1>;
+	};
+
+	max98390_38: amplifier@38 {
+		compatible = "maxim,max98390";
+		reg = <0x38>;
+		sound-name-prefix = "Front Right";
+		reset-gpios = <&pio 118 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&speaker_en>;
+		#sound-dai-cells = <0>;
+	};
+
+	max98390_39: amplifier@39 {
+		compatible = "maxim,max98390";
+		reg = <0x39>;
+		sound-name-prefix = "Front Left";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c_tunnel {
+	/*
+	 * The virtual battery I2C addr is 0xf on Ciri, so we describe it
+	 * manually instead of including 'arm/cros-ec-sbs.dtsi'.
+	 **/
+	battery: sbs-battery@f {
+		compatible = "sbs,sbs-battery";
+		reg = <0xf>;
+		sbs,i2c-retry-count = <2>;
+		sbs,poll-retry-count = <1>;
+	};
+};
+
+&mipi_tx_config0 {
+	drive-strength-microamp = <5200>;
+};
+
+&mt6359_vm18_ldo_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1900000>;
+	regulator-microvolt-offset = <100000>;
+};
+
+&sound {
+	dai-link-0 {
+		link-name = "ETDM1_IN_BE";
+		dai-format = "i2s";
+		mediatek,clk-provider = "cpu";
+	};
+
+	dai-link-1 {
+		link-name = "ETDM1_OUT_BE";
+		dai-format = "i2s";
+		mediatek,clk-provider = "cpu";
+
+		codec {
+			sound-dai = <&max98390_38>,
+				    <&max98390_39>;
+		};
+	};
+
+	dai-link-2 {
+		link-name = "ETDM2_IN_BE";
+		mediatek,clk-provider = "cpu";
+
+		codec {
+			sound-dai = <&rt5682s 0>;
+		};
+	};
+
+	dai-link-3 {
+		link-name = "ETDM2_OUT_BE";
+		mediatek,clk-provider = "cpu";
+
+		codec {
+			sound-dai = <&rt5682s 0>;
+		};
+	};
+
+	dai-link-4 {
+		link-name = "DPTX_BE";
+
+		codec {
+			sound-dai = <&dp_tx>;
+		};
+	};
+};
+
+&pio {
+	gpio-line-names =
+		"GSC_AP_INT_ODL",
+		"AP_DISP_BKLTEN",
+		"",
+		"EN_PPVAR_MIPI_DISP",
+		"EN_PPVAR_MIPI_DISP_150MA",
+		"TCHSCR_RST_1V8_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"I2S_SPKR_DATAOUT",
+		"EN_PP3300_WLAN_X",
+		"WIFI_KILL_1V8_L",
+		"BT_KILL_1V8_L",
+		"AP_FLASH_WP_L", /* ... is crossystem ABI. Rev1 schematics call it AP_WP_ODL. */
+		"",
+		"",
+		"WCAM_PWDN_L",
+		"WCAM_RST_L",
+		"UCAM_PWDM_L",
+		"UCAM_RST_L",
+		"WCAM_24M_CLK",
+		"UCAM_24M_CLK",
+		"MT6319_INT",
+		"DISP_RST_1V8_L",
+		"DSIO_DSI_TE",
+		"",
+		"TP",
+		"MIPI_BL_PWM_1V8",
+		"",
+		"UART_AP_TX_GSC_RX",
+		"UART_GSC_TX_AP_RX",
+		"UART_SSPM_TX_DBGCON_RX",
+		"UART_DBGCON_TX_SSPM_RX",
+		"UART_ADSP_TX_DBGCON_RX",
+		"UART_DBGCON_TX_ADSP_RX",
+		"JTAG_AP_TMS",
+		"JTAG_AP_TCK",
+		"JTAG_AP_TDI",
+		"JTAG_AP_TDO",
+		"JTAG_AP_TRST",
+		"AP_KPCOL0",
+		"TP",
+		"",
+		"TP",
+		"EC_AP_HPD_OD",
+		"PCIE_WAKE_1V8_ODL",
+		"PCIE_RST_1V8_L",
+		"PCIE_CLKREQ_1V8_ODL",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AP_I2C_AUD_SCL_1V8",
+		"AP_I2C_AUD_SDA_1V8",
+		"AP_I2C_TPM_SCL_1V8",
+		"AP_I2C_TPM_SDA_1V8",
+		"AP_I2C_TCHSCR_SCL_1V8",
+		"AP_I2C_TCHSCR_SDA_1V8",
+		"AP_I2C_PMIC_SAR_SCL_1V8",
+		"AP_I2C_PMIC_SAR_SDA_1V8",
+		"AP_I2C_EC_HID_KB_SCL_1V8",
+		"AP_I2C_EC_HID_KB_SDA_1V8",
+		"AP_I2C_UCAM_SCL_1V8",
+		"AP_I2C_UCAM_SDA_1V8",
+		"AP_I2C_WCAM_SCL_1V8",
+		"AP_I2C_WCAM_SDA_1V8",
+		"SPI_AP_CS_EC_L",
+		"SPI_AP_CLK_EC",
+		"SPI_AP_DO_EC_DI",
+		"SPI_AP_DI_EC_DO",
+		"TP",
+		"TP",
+		"SPI_AP_CS_TCHSCR_L",
+		"SPI_AP_CLK_TCHSCR",
+		"SPI_AP_DO_TCHSCR_DI",
+		"SPI_AP_DI_TCHSCR_DO",
+		"TP",
+		"TP",
+		"TP",
+		"TP",
+		"",
+		"",
+		"",
+		"TP",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"PWRAP_SPI_CS_L",
+		"PWRAP_SPI_CK",
+		"PWRAP_SPI_MOSI",
+		"PWRAP_SPI_MISO",
+		"SRCLKENA0",
+		"SRCLKENA1",
+		"SCP_VREQ_VAO",
+		"AP_RTC_CLK32K",
+		"AP_PMIC_WDTRST_L",
+		"AUD_CLK_MOSI",
+		"AUD_SYNC_MOSI",
+		"AUD_DAT_MOSI0",
+		"AUD_DAT_MOSI1",
+		"AUD_DAT_MISO0",
+		"AUD_DAT_MISO1",
+		"",
+		"HP_INT_ODL",
+		"SPKR_INT_ODL",
+		"I2S_HP_DATAIN",
+		"EN_SPKR",
+		"I2S_SPKR_MCLK",
+		"I2S_SPKR_BCLK",
+		"I2S_HP_MCLK",
+		"I2S_HP_BCLK",
+		"I2S_HP_LRCK",
+		"I2S_HP_DATAOUT",
+		"RST_SPKR_L",
+		"I2S_SPKR_LRCK",
+		"I2S_SPKR_DATAIN",
+		"",
+		"",
+		"",
+		"",
+		"SPI_AP_CLK_ROM",
+		"SPI_AP_CS_ROM_L",
+		"SPI_AP_DO_ROM_DI",
+		"SPI_AP_DI_ROM_DO",
+		"TP",
+		"TP",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"EN_PP2800A_UCAM_X",
+		"EN_PP1200_UCAM_X",
+		"EN_PP2800A_WCAM_X",
+		"EN_PP1100_WCAM_X",
+		"TCHSCR_INT_1V8_L",
+		"",
+		"MT7921_PMU_EN_1V8",
+		"",
+		"AP_EC_WARM_RST_REQ",
+		"EC_AP_HID_INT_ODL",
+		"EC_AP_INT_ODL",
+		"AP_XHCI_INIT_DONE",
+		"EMMC_DAT7",
+		"EMMC_DAT6",
+		"EMMC_DAT5",
+		"EMMC_DAT4",
+		"EMMC_RST_L",
+		"EMMC_CMD",
+		"EMMC_CLK",
+		"EMMC_DAT3",
+		"EMMC_DAT2",
+		"EMMC_DAT1",
+		"EMMC_DAT0",
+		"EMMC_DSL",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"USB3_HUB_RST_L",
+		"EC_AP_RSVD0_ODL",
+		"",
+		"",
+		"SPMI_SCL",
+		"SPMI_SDA";
+
+	audio_codec_pins: audio-codec-pins {
+		pins-hp-int-odl {
+			pinmux = <PINMUX_GPIO108__FUNC_B_GPIO108>;
+			input-enable;
+		};
+	};
+
+	speaker_en: speaker-en-pins {
+		pins-en-spkr {
+			pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
new file mode 100644
index 000000000000..7fedbacdac44
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
@@ -0,0 +1,1340 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "mt8188.dtsi"
+#include "mt6359.dtsi"
+
+/ {
+	aliases {
+		dsi0 = &disp_dsi0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		mmc0 = &mmc0;
+		serial0 = &uart0;
+	};
+
+	backlight_lcd0: backlight-lcd0 {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <576>;
+		enable-gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
+		num-interpolated-steps = <1023>;
+		power-supply = <&ppvar_sys>;
+		pwms = <&disp_pwm0 0 500000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <100>;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* The size will be filled in by the bootloader */
+		reg = <0 0x40000000 0 0>;
+	};
+
+	/* system wide LDO 1.8V power rail */
+	pp1800_ldo_z1: regulator-pp1800-ldo-z1 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_ldo_z1";
+		/* controlled by PP3300_Z1 */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&pp3300_z1>;
+	};
+
+	/* separately switched 3.3V power rail */
+	pp3300_s3: regulator-pp3300-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_s3";
+		/* controlled by PMIC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&pp3300_z1>;
+	};
+
+	/* system wide 3.3V power rail */
+	pp3300_z1: regulator-pp3300-z1 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_z1";
+		/* controlled by PP3300_LDO_Z5 & EN_PWR_Z1 */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_wlan: regulator-pp3300-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_wlan";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&wlan_en>;
+		pinctrl-names = "default";
+		vin-supply = <&pp3300_z1>;
+	};
+
+	/* system wide 4.2V power rail */
+	pp4200_s5: regulator-pp4200-s5 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp4200_s5";
+		/* controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide 5.0V power rail */
+	pp5000_z1: regulator-pp5000-z1 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_z1";
+		/* controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp5000_usb_vbus: regulator-pp5000-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 150 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp5000_z1>;
+	};
+
+	/* system wide semi-regulated power rail from battery or USB */
+	ppvar_sys: regulator-ppvar-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	ppvar_mipi_disp_avdd: regulator-ppvar-mipi-disp-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_mipi_disp_avdd";
+		enable-active-high;
+		gpio = <&pio 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mipi_disp_avdd_en>;
+		vin-supply = <&pp5000_z1>;
+	};
+
+	ppvar_mipi_disp_avee: regulator-ppvar-mipi-disp-avee {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_mipi_disp_avee";
+		regulator-enable-ramp-delay = <10000>;
+		enable-active-high;
+		gpio = <&pio 4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mipi_disp_avee_en>;
+		vin-supply = <&pp5000_z1>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem_reserved: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x800000>;
+			no-map;
+		};
+
+		apu_mem: memory@55000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x55000000 0 0x1400000>;
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xf00000>;
+			no-map;
+		};
+
+		afe_dma_mem: memory@60f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60f00000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&adsp_uart_pins>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	mediatek,etdm-out1-cowork-source = <0>; /* in1 */
+	mediatek,etdm-in2-cowork-source = <3>; /* out2 */
+	status = "okay";
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&cam_vcore {
+	domain-supply = <&mt6359_vproc1_buck_reg>;
+};
+
+/*
+ * Geralt is the reference design and doesn't have target TDP.
+ * Ciri is (currently) the only device following Geralt, and its
+ * TDP target is 90 degrees.
+ **/
+&cpu_little0_alert0 {
+	temperature = <90000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&cpu_little1_alert0 {
+	temperature = <90000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&cpu_little2_alert0 {
+	temperature = <90000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&cpu_little3_alert0 {
+	temperature = <90000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&cpu_big0_alert0 {
+	temperature = <90000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&cpu_big1_alert0 {
+	temperature = <90000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&disp_dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	dsi_panel: panel@0 {
+		/* Compatible string for different panels can be found in each device dts */
+		reg = <0>;
+		enable-gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mipi_dsi_pins>;
+
+		backlight = <&backlight_lcd0>;
+		avdd-supply = <&ppvar_mipi_disp_avdd>;
+		avee-supply = <&ppvar_mipi_disp_avee>;
+		pp1800-supply = <&mt6359_vm18_ldo_reg>;
+		rotation = <270>;
+
+		status = "okay";
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+};
+
+&disp_pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm0_pins>;
+	status = "okay";
+};
+
+&disp_pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm1_pins>;
+};
+
+&dither0_in {
+	remote-endpoint = <&postmask0_out>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&ethdr0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			ethdr0_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&vdosys1_ep_ext>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ethdr0_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&merge5_in>;
+			};
+		};
+	};
+};
+
+&gamma0_out {
+	remote-endpoint = <&postmask0_in>;
+};
+
+&dp_intf1 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			dp_intf1_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&merge5_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			dp_intf1_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dptx_in>;
+			};
+		};
+	};
+};
+
+&dp_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_tx_hpd>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dptx_in: endpoint {
+				remote-endpoint = <&dp_intf1_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dptx_out: endpoint {
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&mt6359_vproc2_buck_reg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tpm@50 {
+		compatible = "google,cr50";
+		reg = <0x50>;
+		interrupts-extended = <&pio 0 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsc_int>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&merge5 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			merge5_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&ethdr0_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			merge5_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dp_intf1_in>;
+			};
+		};
+	};
+};
+
+&mfg0 {
+	domain-supply = <&mt6359_vproc2_buck_reg>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+&mipi_tx_config0 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	hs400-ds-delay = <0x1481b>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sd;
+	no-sdio;
+	non-removable;
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	supports-cqe;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	status = "okay";
+};
+
+&mt6359codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+	mediatek,mic-type-0 = <2>; /* DMIC */
+	mediatek,mic-type-2 = <2>; /* DMIC */
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_sshub_buck_reg {
+	regulator-min-microvolt = <550000>;
+	regulator-max-microvolt = <550000>;
+	regulator-always-on;
+};
+
+&mt6359_vio28_ldo_reg {
+	/delete-property/ regulator-always-on;
+};
+
+&mt6359_vm18_ldo_reg {
+	/delete-property/ regulator-always-on;
+};
+
+&mt6359_vmodem_buck_reg {
+	regulator-min-microvolt = <775000>;
+	regulator-max-microvolt = <775000>;
+};
+
+&mt6359_vpa_buck_reg {
+	regulator-max-microvolt = <3100000>;
+};
+
+&mt6359_vproc2_buck_reg {
+	/*
+	 * Called "ppvar_dvdd_gpu" in the schematic. Renamed to
+	 * "ppvar_dvdd_vgpu" here to match mtk-regulator-coupler requirements.
+	 */
+	regulator-name = "ppvar_dvdd_vgpu";
+	regulator-min-microvolt = <550000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
+	regulator-coupled-max-spread = <6250>;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_md_ldo_reg {
+	regulator-min-microvolt = <800000>;
+	regulator-max-microvolt = <800000>;
+};
+
+&mt6359_vsram_others_ldo_reg {
+	regulator-name = "pp0850_dvdd_sram_gpu";
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6359_vproc2_buck_reg>;
+	regulator-coupled-max-spread = <6250>;
+};
+
+&mt6359_vufs_ldo_reg {
+	regulator-always-on;
+};
+
+&nor_flash {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+	};
+};
+
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pio {
+	gpio-line-names =
+		"gsc_int",
+		"AP_DISP_BKLTEN",
+		"",
+		"EN_PPVAR_MIPI_DISP",
+		"EN_PPVAR_MIPI_DISP_150MA",
+		"TCHSCR_RST_1V8_L",
+		"TCHSRC_REPORT_DISABLE",
+		"",
+		"",
+		"",
+		"",
+		"I2S_SPKR_DATAOUT",
+		"EN_PP3300_WLAN_X",
+		"WIFI_KILL_1V8_L",
+		"BT_KILL_1V8_L",
+		"AP_FLASH_WP_L", /* ... is crossystem ABI. Rev1 schematics call it AP_WP_ODL. */
+		"",
+		"EDP_HPD_1V8",
+		"WCAM_PWDN_L",
+		"WCAM_RST_L",
+		"UCAM_PWDM_L",
+		"UCAM_RST_L",
+		"WCAM_24M_CLK",
+		"UCAM_24M_CLK",
+		"MT6319_INT",
+		"DISP_RST_1V8_L",
+		"DSIO_DSI_TE",
+		"EN_PP3300_EDP_DISP_X",
+		"TP",
+		"MIPI_BL_PWM_1V8",
+		"EDP_BL_PWM_1V8",
+		"UART_AP_TX_GSC_RX",
+		"UART_GSC_TX_AP_RX",
+		"UART_SSPM_TX_DBGCON_RX",
+		"UART_DBGCON_TX_SSPM_RX",
+		"UART_ADSP_TX_DBGCON_RX",
+		"UART_DBGCON_TX_ADSP_RX",
+		"JTAG_AP_TMS",
+		"JTAG_AP_TCK",
+		"JTAG_AP_TDI",
+		"JTAG_AP_TDO",
+		"JTAG_AP_TRST",
+		"AP_KPCOL0",
+		"TP",
+		"BEEP_ON_OD",
+		"TP",
+		"EC_AP_HPD_OD",
+		"PCIE_WAKE_1V8_ODL",
+		"PCIE_RST_1V8_L",
+		"PCIE_CLKREQ_1V8_ODL",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AP_I2C_AUD_SCL_1V8",
+		"AP_I2C_AUD_SDA_1V8",
+		"AP_I2C_TPM_SCL_1V8",
+		"AP_I2C_TPM_SDA_1V8",
+		"AP_I2C_TCHSCR_SCL_1V8",
+		"AP_I2C_TCHSCR_SDA_1V8",
+		"AP_I2C_PMIC_SAR_SCL_1V8",
+		"AP_I2C_PMIC_SAR_SDA_1V8",
+		"AP_I2C_EC_HID_KB_SCL_1V8",
+		"AP_I2C_EC_HID_KB_SDA_1V8",
+		"AP_I2C_UCAM_SCL_1V8",
+		"AP_I2C_UCAM_SDA_1V8",
+		"AP_I2C_WCAM_SCL_1V8",
+		"AP_I2C_WCAM_SDA_1V8",
+		"SPI_AP_CS_EC_L",
+		"SPI_AP_CLK_EC",
+		"SPI_AP_DO_EC_DI",
+		"SPI_AP_DI_EC_DO",
+		"TP",
+		"TP",
+		"SPI_AP_CS_TCHSCR_L",
+		"SPI_AP_CLK_TCHSCR",
+		"SPI_AP_DO_TCHSCR_DI",
+		"SPI_AP_DI_TCHSCR_DO",
+		"TP",
+		"TP",
+		"TP",
+		"TP",
+		"",
+		"",
+		"",
+		"TP",
+		"",
+		"SAR_INT_ODL",
+		"",
+		"",
+		"",
+		"PWRAP_SPI_CS_L",
+		"PWRAP_SPI_CK",
+		"PWRAP_SPI_MOSI",
+		"PWRAP_SPI_MISO",
+		"SRCLKENA0",
+		"SRCLKENA1",
+		"SCP_VREQ_VAO",
+		"AP_RTC_CLK32K",
+		"AP_PMIC_WDTRST_L",
+		"AUD_CLK_MOSI",
+		"AUD_SYNC_MOSI",
+		"AUD_DAT_MOSI0",
+		"AUD_DAT_MOSI1",
+		"AUD_DAT_MISO0",
+		"AUD_DAT_MISO1",
+		"SD_CD_ODL",
+		"HP_INT_ODL",
+		"SPKR_INT_ODL",
+		"I2S_HP_DATAIN",
+		"EN_SPKR",
+		"I2S_SPKR_MCLK",
+		"I2S_SPKR_BCLK",
+		"I2S_HP_MCLK",
+		"I2S_HP_BCLK",
+		"I2S_HP_LRCK",
+		"I2S_HP_DATAOUT",
+		"RST_SPKR_L",
+		"I2S_SPKR_LRCK",
+		"I2S_SPKR_DATAIN",
+		"",
+		"",
+		"",
+		"",
+		"SPI_AP_CLK_ROM",
+		"SPI_AP_CS_ROM_L",
+		"SPI_AP_DO_ROM_DI",
+		"SPI_AP_DI_ROM_DO",
+		"TP",
+		"TP",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"EN_PP2800A_UCAM_X",
+		"EN_PP1200_UCAM_X",
+		"EN_PP2800A_WCAM_X",
+		"EN_PP1100_WCAM_X",
+		"TCHSCR_INT_1V8_L",
+		"EN_PP3300_MIPI_TCHSCR_X",
+		"MT7921_PMU_EN_1V8",
+		"EN_PP3300_EDP_TCHSCR_X",
+		"AP_EC_WARM_RST_REQ",
+		"EC_AP_HID_INT_ODL",
+		"EC_AP_INT_ODL",
+		"AP_XHCI_INIT_DONE",
+		"EMMC_DAT7",
+		"EMMC_DAT6",
+		"EMMC_DAT5",
+		"EMMC_DAT4",
+		"EMMC_RST_L",
+		"EMMC_CMD",
+		"EMMC_CLK",
+		"EMMC_DAT3",
+		"EMMC_DAT2",
+		"EMMC_DAT1",
+		"EMMC_DAT0",
+		"EMMC_DSL",
+		"SD_CMD",
+		"SD_CLK",
+		"SD_DAT0",
+		"SD_DAT1",
+		"SD_DAT2",
+		"SD_DAT3",
+		"",
+		"",
+		"USB3_HUB_RST_L",
+		"EC_AP_RSVD0_ODL",
+		"",
+		"",
+		"SPMI_SCL",
+		"SPMI_SDA";
+
+	adsp_uart_pins: adsp-uart-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>,
+				 <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>;
+		};
+	};
+
+	aud_etdm_hp_on: aud-etdm-hp-on-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO110__FUNC_I0_I2SIN_D0>,
+				 <PINMUX_GPIO115__FUNC_B0_I2SO2_BCK>,
+				 <PINMUX_GPIO116__FUNC_B0_I2SO2_WS>,
+				 <PINMUX_GPIO117__FUNC_O_I2SO2_D0>;
+		};
+	};
+
+	aud_etdm_hp_off: aud-etdm-hp-off-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO110__FUNC_B_GPIO110>,
+				 <PINMUX_GPIO115__FUNC_B_GPIO115>,
+				 <PINMUX_GPIO116__FUNC_B_GPIO116>,
+				 <PINMUX_GPIO117__FUNC_B_GPIO117>;
+			bias-pull-down;
+			input-enable;
+		};
+	};
+
+	aud_etdm_spk_on: aud-etdm-spk-on-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO11__FUNC_O_I2SO1_D0>,
+				 <PINMUX_GPIO113__FUNC_B0_TDMIN_BCK>,
+				 <PINMUX_GPIO119__FUNC_B0_TDMIN_LRCK>,
+				 <PINMUX_GPIO120__FUNC_I0_TDMIN_DI>;
+			drive-strength = <8>;
+		};
+	};
+
+	aud_etdm_spk_off: aud-etdm-spk-off-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO11__FUNC_B_GPIO11>,
+				 <PINMUX_GPIO113__FUNC_B_GPIO113>,
+				 <PINMUX_GPIO119__FUNC_B_GPIO119>,
+				 <PINMUX_GPIO120__FUNC_B_GPIO120>;
+			bias-pull-down;
+			input-enable;
+		};
+	};
+
+	aud_mtkaif_on: aud-mtkaif-on-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI>,
+				 <PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1>,
+				 <PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1>;
+		};
+	};
+
+	aud_mtkaif_off: aud-mtkaif-off-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO101__FUNC_B_GPIO101>,
+				 <PINMUX_GPIO102__FUNC_B_GPIO102>,
+				 <PINMUX_GPIO103__FUNC_B_GPIO103>,
+				 <PINMUX_GPIO104__FUNC_B_GPIO104>,
+				 <PINMUX_GPIO105__FUNC_B_GPIO105>,
+				 <PINMUX_GPIO106__FUNC_B_GPIO106>;
+			bias-pull-down;
+			input-enable;
+		};
+	};
+
+	cros_ec_int: cros-ec-int-pins {
+		pins-ec-ap-int-odl {
+			pinmux = <PINMUX_GPIO149__FUNC_B_GPIO149>;
+			input-enable;
+		};
+	};
+
+	disp_pwm0_pins: disp-pwm0-pins {
+		pins-disp-pwm0 {
+			pinmux = <PINMUX_GPIO29__FUNC_O_DISP_PWM0>;
+			output-high;
+		};
+	};
+
+	disp_pwm1_pins: disp-pwm1-pins {
+		pins-disp-pwm1 {
+			pinmux = <PINMUX_GPIO30__FUNC_O_DISP_PWM1>;
+			output-high;
+		};
+	};
+
+	dp_tx_hpd: dp-tx-hpd-pins {
+		pins-dp-tx-hpd {
+			pinmux = <PINMUX_GPIO46__FUNC_I0_DP_TX_HPD>;
+		};
+	};
+
+	gsc_int: gsc-int-pins {
+		pins-gsc-ap-int-odl {
+			pinmux = <PINMUX_GPIO0__FUNC_B_GPIO0>;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+				 <PINMUX_GPIO57__FUNC_B1_SCL1>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+				 <PINMUX_GPIO59__FUNC_B1_SCL2>;
+			bias-disable;
+			drive-strength = <12>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+				 <PINMUX_GPIO61__FUNC_B1_SCL3>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
+				 <PINMUX_GPIO63__FUNC_B1_SCL4>;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
+				 <PINMUX_GPIO65__FUNC_B1_SCL5>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
+				 <PINMUX_GPIO67__FUNC_B1_SCL6>;
+		};
+	};
+
+	mipi_disp_avdd_en: mipi-disp-avdd-en-pins {
+		pins-en-ppvar-mipi-disp {
+			pinmux = <PINMUX_GPIO3__FUNC_B_GPIO3>;
+			output-low;
+		};
+	};
+
+	mipi_disp_avee_en: mipi-disp-avee-en-pins {
+		pins-en-ppvar-mipi-disp-150ma {
+			pinmux = <PINMUX_GPIO4__FUNC_B_GPIO4>;
+			output-low;
+		};
+	};
+
+	mipi_dsi_pins: mipi-dsi-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO1__FUNC_B_GPIO1>,
+				 <PINMUX_GPIO25__FUNC_B_GPIO25>;
+			output-low;
+		};
+	};
+
+	mmc0_pins_default: mmc0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	nor_pins: nor-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>,
+				 <PINMUX_GPIO125__FUNC_O_SPINOR_CK>,
+				 <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>;
+			bias-pull-down;
+		};
+
+		pins-cs {
+			pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>;
+			bias-pull-up;
+		};
+	};
+
+	pcie_pins: pcie-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO47__FUNC_I1_WAKEN>,
+				 <PINMUX_GPIO48__FUNC_O_PERSTN>,
+				 <PINMUX_GPIO49__FUNC_B1_CLKREQN>;
+		};
+	};
+
+	scp_pins: scp-pins {
+		pins-scp-vreq {
+			pinmux = <PINMUX_GPIO98__FUNC_O_SCP_VREQ_VAO>;
+			bias-disable;
+		};
+	};
+
+	spi0_pins: spi0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
+				 <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
+				 <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
+				 <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins_default: spi1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+				 <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+				 <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
+				 <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins_sleep: spi1-sleep-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO75__FUNC_B_GPIO75>,
+				 <PINMUX_GPIO76__FUNC_B_GPIO76>,
+				 <PINMUX_GPIO77__FUNC_B_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_B_GPIO78>;
+			bias-pull-down;
+			input-enable;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
+				 <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
+				 <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
+				 <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
+			bias-pull-up;
+		};
+	};
+
+	wlan_en: wlan-en-pins {
+		pins-en-pp3300-wlan {
+			pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>;
+			output-low;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&postmask0_in {
+	remote-endpoint = <&gamma0_out>;
+};
+
+&postmask0_out {
+	remote-endpoint = <&dither0_in>;
+};
+
+&scp_cluster {
+	status = "okay";
+};
+
+&scp_c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scp_pins>;
+	firmware-name = "mediatek/mt8188/scp.img";
+	memory-region = <&scp_mem_reserved>;
+	status = "okay";
+};
+
+&sound {
+	pinctrl-names = "aud_etdm_hp_on", "aud_etdm_hp_off",
+			"aud_etdm_spk_on", "aud_etdm_spk_off",
+			"aud_mtkaif_on", "aud_mtkaif_off";
+	pinctrl-0 = <&aud_etdm_hp_on>;
+	pinctrl-1 = <&aud_etdm_hp_off>;
+	pinctrl-2 = <&aud_etdm_spk_on>;
+	pinctrl-3 = <&aud_etdm_spk_off>;
+	pinctrl-4 = <&aud_mtkaif_on>;
+	pinctrl-5 = <&aud_mtkaif_off>;
+	mediatek,adsp = <&adsp>;
+	/* The audio-routing is defined in each board dts */
+
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupts-extended = <&pio 149 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cros_ec_int>;
+		spi-max-frequency = <3000000>;
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		cbas {
+			compatible = "google,cros-cbas";
+		};
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi1_pins_default>;
+	pinctrl-1 = <&spi1_pins_sleep>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+/* USB detachable base */
+&ssusb0 {
+	dr_mode = "host";
+	vusb33-supply = <&pp3300_s3>;
+	status = "okay";
+};
+
+&xhci0 {
+	/* controlled by EC */
+	vbus-supply = <&pp3300_z1>;
+	status = "okay";
+};
+
+/* USB3 hub */
+&ssusb1 {
+	dr_mode = "host";
+	vusb33-supply = <&pp3300_s3>;
+	status = "okay";
+};
+
+&xhci1 {
+	vusb33-supply = <&pp3300_s3>;
+	vbus-supply = <&pp5000_usb_vbus>;
+	status = "okay";
+};
+
+/* USB BT */
+&ssusb2 {
+	dr_mode = "host";
+	vusb33-supply = <&pp3300_s3>;
+	status = "okay";
+};
+
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
+
+&vdosys1 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys1_ep_ext: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ethdr0_in>;
+		};
+	};
+};
+
+&xhci2 {
+	/* no power supply since MT7921's power is controlled by PCIe */
+	/* MT7921's USB BT has issues with USB2 LPM */
+	usb2-lpm-disable;
+	status = "okay";
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x01, 0x04, KEY_MICMUTE)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
new file mode 100644
index 000000000000..90c388f1890f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -0,0 +1,3555 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2023 MediaTek Inc.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/mediatek,mt8188-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mailbox/mediatek,mt8188-gce.h>
+#include <dt-bindings/memory/mediatek,mt8188-memory-port.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
+#include <dt-bindings/power/mediatek,mt8188-power.h>
+#include <dt-bindings/reset/mt8188-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
+
+/ {
+	compatible = "mediatek,mt8188";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		dp-intf0 = &dp_intf0;
+		dp-intf1 = &dp_intf1;
+		dsc0 = &dsc0;
+		ethdr0 = &ethdr0;
+		gce0 = &gce0;
+		gce1 = &gce1;
+		merge0 = &merge0;
+		merge1 = &merge1;
+		merge2 = &merge2;
+		merge3 = &merge3;
+		merge4 = &merge4;
+		merge5 = &merge5;
+		mutex0 = &mutex0;
+		mutex1 = &mutex1;
+		padding0 = &padding0;
+		padding1 = &padding1;
+		padding2 = &padding2;
+		padding3 = &padding3;
+		padding4 = &padding4;
+		padding5 = &padding5;
+		padding6 = &padding6;
+		padding7 = &padding7;
+		vdo1-rdma0 = &vdo1_rdma0;
+		vdo1-rdma1 = &vdo1_rdma1;
+		vdo1-rdma2 = &vdo1_rdma2;
+		vdo1-rdma3 = &vdo1_rdma3;
+		vdo1-rdma4 = &vdo1_rdma4;
+		vdo1-rdma5 = &vdo1_rdma5;
+		vdo1-rdma6 = &vdo1_rdma6;
+		vdo1-rdma7 = &vdo1_rdma7;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x000>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x400>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x500>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x600>;
+			enable-method = "psci";
+			clock-frequency = <2600000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x700>;
+			enable-method = "psci";
+			clock-frequency = <2600000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+
+				core6 {
+					cpu = <&cpu6>;
+				};
+
+				core7 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_off_l: cpu-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010000>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <95>;
+				min-residency-us = <580>;
+			};
+
+			cpu_off_b: cpu-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010000>;
+				local-timer-stop;
+				entry-latency-us = <45>;
+				exit-latency-us = <140>;
+				min-residency-us = <740>;
+			};
+
+			cluster_off_l: cluster-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010010>;
+				local-timer-stop;
+				entry-latency-us = <55>;
+				exit-latency-us = <155>;
+				min-residency-us = <840>;
+			};
+
+			cluster_off_b: cluster-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010010>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <200>;
+				min-residency-us = <1000>;
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-unified;
+		};
+	};
+
+	clk13m: oscillator-13m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <13000000>;
+		clock-output-names = "clk13m";
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-390000000 {
+			opp-hz = /bits/ 64 <390000000>;
+			opp-microvolt = <575000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-431000000 {
+			opp-hz = /bits/ 64 <431000000>;
+			opp-microvolt = <587500>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-473000000 {
+			opp-hz = /bits/ 64 <473000000>;
+			opp-microvolt = <600000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-515000000 {
+			opp-hz = /bits/ 64 <515000000>;
+			opp-microvolt = <612500>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-556000000 {
+			opp-hz = /bits/ 64 <556000000>;
+			opp-microvolt = <625000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <637500>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-640000000 {
+			opp-hz = /bits/ 64 <640000000>;
+			opp-microvolt = <650000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-670000000 {
+			opp-hz = /bits/ 64 <670000000>;
+			opp-microvolt = <662500>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <675000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-730000000 {
+			opp-hz = /bits/ 64 <730000000>;
+			opp-microvolt = <687500>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-760000000 {
+			opp-hz = /bits/ 64 <760000000>;
+			opp-microvolt = <700000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-790000000 {
+			opp-hz = /bits/ 64 <790000000>;
+			opp-microvolt = <712500>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-835000000 {
+			opp-hz = /bits/ 64 <835000000>;
+			opp-microvolt = <731250>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-880000000 {
+			opp-hz = /bits/ 64 <880000000>;
+			opp-microvolt = <750000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-915000000 {
+			opp-hz = /bits/ 64 <915000000>;
+			opp-microvolt = <775000>;
+			opp-supported-hw = <0x8f>;
+		};
+		opp-915000000-5 {
+			opp-hz = /bits/ 64 <915000000>;
+			opp-microvolt = <762500>;
+			opp-supported-hw = <0x30>;
+		};
+		opp-915000000-6 {
+			opp-hz = /bits/ 64 <915000000>;
+			opp-microvolt = <750000>;
+			opp-supported-hw = <0x70>;
+		};
+		opp-950000000 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <800000>;
+			opp-supported-hw = <0x8f>;
+		};
+		opp-950000000-5 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <775000>;
+			opp-supported-hw = <0x30>;
+		};
+		opp-950000000-6 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <750000>;
+			opp-supported-hw = <0x70>;
+		};
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-a78 {
+		compatible = "arm,cortex-a78-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	sound: sound {
+		mediatek,platform = <&afe>;
+		status = "disabled";
+	};
+
+	thermal_zones: thermal-zones {
+		cpu-little0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <150>;
+			thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU0>;
+
+			trips {
+				cpu_little0_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_little0_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_little0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu_little0_cooling_map0: map0 {
+					trip = <&cpu_little0_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-little1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <150>;
+			thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU1>;
+
+			trips {
+				cpu_little1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_little1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_little1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu_little1_cooling_map0: map0 {
+					trip = <&cpu_little1_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-little2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <150>;
+			thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU2>;
+
+			trips {
+				cpu_little2_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_little2_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_little2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu_little2_cooling_map0: map0 {
+					trip = <&cpu_little2_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-little3-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <150>;
+			thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU3>;
+
+			trips {
+				cpu_little3_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_little3_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_little3_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu_little3_cooling_map0: map0 {
+					trip = <&cpu_little3_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-big0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&lvts_mcu MT8188_MCU_BIG_CPU0>;
+
+			trips {
+				cpu_big0_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_big0_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_big0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_big0_alert0>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-big1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&lvts_mcu MT8188_MCU_BIG_CPU1>;
+
+			trips {
+				cpu_big1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_big1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_big1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_big1_alert0>;
+					cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		apu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_APU>;
+
+			trips {
+				apu_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				apu_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				apu_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_GPU0>;
+
+			trips {
+				gpu_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpu_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_GPU1>;
+
+			trips {
+				gpu1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		adsp-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_ADSP>;
+
+			trips {
+				soc_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				soc_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		vdo-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_VDO>;
+
+			trips {
+				soc1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				soc1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		infra-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_INFRA>;
+
+			trips {
+				soc2_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc2_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				soc2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_CAM1>;
+
+			trips {
+				cam1_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam1_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cam1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8188_AP_CAM2>;
+
+			trips {
+				cam2_alert0: trip-alert0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam2_alert1: trip-alert1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cam2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+		clock-frequency = <13000000>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		dma-ranges = <0x0 0x0 0x0 0x0 0x4 0x0>;
+		ranges;
+
+		performance: performance-controller@11bc10 {
+			compatible = "mediatek,cpufreq-hw";
+			reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+			#performance-domain-cells = <1>;
+		};
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			#redistributor-regions = <1>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c040000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8188-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg_ao: syscon@10001000 {
+			compatible = "mediatek,mt8188-infracfg-ao", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8188-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8188-pinctrl";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x11c00000 0 0x1000>,
+			      <0 0x11e10000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11ea0000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "iocfg0", "iocfg_rm", "iocfg_lt",
+				    "iocfg_lm", "iocfg_rt", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 176>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH 0>;
+			#interrupt-cells = <2>;
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8188-scpsys", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8188-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domain of the SoC */
+				mfg0: power-domain@MT8188_POWER_DOMAIN_MFG0 {
+					reg = <MT8188_POWER_DOMAIN_MFG0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					mfg1: power-domain@MT8188_POWER_DOMAIN_MFG1 {
+						reg = <MT8188_POWER_DOMAIN_MFG1>;
+						clocks = <&apmixedsys CLK_APMIXED_MFGPLL>,
+							 <&topckgen CLK_TOP_MFG_CORE_TMP>;
+						clock-names = "mfg", "alt";
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8188_POWER_DOMAIN_MFG2 {
+							reg = <MT8188_POWER_DOMAIN_MFG2>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_MFG3 {
+							reg = <MT8188_POWER_DOMAIN_MFG3>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_MFG4 {
+							reg = <MT8188_POWER_DOMAIN_MFG4>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8188_POWER_DOMAIN_VPPSYS0 {
+					reg = <MT8188_POWER_DOMAIN_VPPSYS0>;
+					clocks = <&topckgen CLK_TOP_VPP>,
+						 <&topckgen CLK_TOP_CAM>,
+						 <&topckgen CLK_TOP_CCU>,
+						 <&topckgen CLK_TOP_IMG>,
+						 <&topckgen CLK_TOP_VENC>,
+						 <&topckgen CLK_TOP_VDEC>,
+						 <&topckgen CLK_TOP_WPE_VPP>,
+						 <&topckgen CLK_TOP_CFGREG_CLOCK_EN_VPP0>,
+						 <&topckgen CLK_TOP_CFGREG_F26M_VPP0>,
+						 <&vppsys0 CLK_VPP0_SMI_COMMON_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_VDO0_LARB0_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_VDO0_LARB1_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_VENCSYS_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_VENCSYS_CORE1_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_INFRA_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_CAMSYS_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_VPP1_LARB5_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_VPP1_LARB6_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_SMI_REORDER_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_SMI_IOMMU>,
+						 <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>,
+						 <&vppsys0 CLK_VPP0_GALS_EMI0_EMI1>,
+						 <&vppsys0 CLK_VPP0_SMI_SUB_COMMON_REORDER>,
+						 <&vppsys0 CLK_VPP0_SMI_RSI>,
+						 <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>,
+						 <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>,
+						 <&vppsys0 CLK_VPP0_GALS_VPP1_WPESYS>,
+						 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>;
+					clock-names = "top", "cam", "ccu", "img", "venc",
+						      "vdec", "wpe", "cfgck", "cfgxo",
+						      "ss-sram-cmn", "ss-sram-v0l0", "ss-sram-v0l1",
+						      "ss-sram-ve0", "ss-sram-ve1", "ss-sram-ifa",
+						      "ss-sram-cam", "ss-sram-v1l5", "ss-sram-v1l6",
+						      "ss-sram-rdr", "ss-iommu", "ss-imgcam",
+						      "ss-emi", "ss-subcmn-rdr", "ss-rsi",
+						      "ss-cmn-l4", "ss-vdec1", "ss-wpe",
+						      "ss-cvdo-ve1";
+					mediatek,infracfg = <&infracfg_ao>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8188_POWER_DOMAIN_VDOSYS0 {
+						reg = <MT8188_POWER_DOMAIN_VDOSYS0>;
+						clocks = <&topckgen CLK_TOP_CFGREG_CLOCK_EN_VDO0>,
+							 <&topckgen CLK_TOP_CFGREG_F26M_VDO0>,
+							 <&vdosys0 CLK_VDO0_SMI_GALS>,
+							 <&vdosys0 CLK_VDO0_SMI_COMMON>,
+							 <&vdosys0 CLK_VDO0_SMI_EMI>,
+							 <&vdosys0 CLK_VDO0_SMI_IOMMU>,
+							 <&vdosys0 CLK_VDO0_SMI_LARB>,
+							 <&vdosys0 CLK_VDO0_SMI_RSI>,
+							 <&vdosys0 CLK_VDO0_APB_BUS>;
+						clock-names = "cfgck", "cfgxo", "ss-gals",
+							      "ss-cmn", "ss-emi", "ss-iommu",
+							      "ss-larb", "ss-rsi", "ss-bus";
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8188_POWER_DOMAIN_VPPSYS1 {
+							reg = <MT8188_POWER_DOMAIN_VPPSYS1>;
+							clocks = <&topckgen CLK_TOP_CFGREG_CLOCK_EN_VPP1>,
+								 <&topckgen CLK_TOP_CFGREG_F26M_VPP1>,
+								 <&vppsys1 CLK_VPP1_GALS5>,
+								 <&vppsys1 CLK_VPP1_GALS6>,
+								 <&vppsys1 CLK_VPP1_LARB5>,
+								 <&vppsys1 CLK_VPP1_LARB6>;
+							clock-names = "cfgck", "cfgxo",
+								      "ss-vpp1-g5", "ss-vpp1-g6",
+								      "ss-vpp1-l5", "ss-vpp1-l6";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_VDEC0 {
+							reg = <MT8188_POWER_DOMAIN_VDEC0>;
+							clocks = <&vdecsys_soc CLK_VDEC1_SOC_LARB1>;
+							clock-names = "ss-vdec1-soc-l1";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <1>;
+
+							power-domain@MT8188_POWER_DOMAIN_VDEC1 {
+								reg = <MT8188_POWER_DOMAIN_VDEC1>;
+								clocks = <&vdecsys CLK_VDEC2_LARB1>;
+								clock-names = "ss-vdec2-l1";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+						};
+
+						cam_vcore: power-domain@MT8188_POWER_DOMAIN_CAM_VCORE {
+							reg = <MT8188_POWER_DOMAIN_CAM_VCORE>;
+							clocks = <&topckgen CLK_TOP_CAM>,
+								 <&topckgen CLK_TOP_CCU>,
+								 <&topckgen CLK_TOP_CCU_AHB>,
+								 <&topckgen CLK_TOP_CFGREG_CLOCK_ISP_AXI_GALS>;
+							clock-names = "cam", "ccu", "bus", "cfgck";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <1>;
+
+							power-domain@MT8188_POWER_DOMAIN_CAM_MAIN {
+								reg = <MT8188_POWER_DOMAIN_CAM_MAIN>;
+								clocks = <&camsys CLK_CAM_MAIN_LARB13>,
+									 <&camsys CLK_CAM_MAIN_LARB14>,
+									 <&camsys CLK_CAM_MAIN_CAM2MM0_GALS>,
+									 <&camsys CLK_CAM_MAIN_CAM2MM1_GALS>,
+									 <&camsys CLK_CAM_MAIN_CAM2SYS_GALS>;
+								clock-names= "ss-cam-l13", "ss-cam-l14",
+									     "ss-cam-mm0", "ss-cam-mm1",
+									     "ss-camsys";
+								mediatek,infracfg = <&infracfg_ao>;
+								#address-cells = <1>;
+								#size-cells = <0>;
+								#power-domain-cells = <1>;
+
+								power-domain@MT8188_POWER_DOMAIN_CAM_SUBB {
+									reg = <MT8188_POWER_DOMAIN_CAM_SUBB>;
+									clocks = <&camsys CLK_CAM_MAIN_CAM_SUBB>,
+										 <&camsys_rawb CLK_CAM_RAWB_LARBX>,
+										 <&camsys_yuvb CLK_CAM_YUVB_LARBX>;
+									clock-names = "ss-camb-sub",
+										      "ss-camb-raw",
+										      "ss-camb-yuv";
+									#power-domain-cells = <0>;
+								};
+
+								power-domain@MT8188_POWER_DOMAIN_CAM_SUBA {
+									reg =<MT8188_POWER_DOMAIN_CAM_SUBA>;
+									clocks = <&camsys CLK_CAM_MAIN_CAM_SUBA>,
+										 <&camsys_rawa CLK_CAM_RAWA_LARBX>,
+										 <&camsys_yuva CLK_CAM_YUVA_LARBX>;
+									clock-names = "ss-cama-sub",
+										      "ss-cama-raw",
+										      "ss-cama-yuv";
+									#power-domain-cells = <0>;
+								};
+							};
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_VDOSYS1 {
+							reg = <MT8188_POWER_DOMAIN_VDOSYS1>;
+							clocks = <&topckgen CLK_TOP_CFGREG_CLOCK_EN_VDO1>,
+								 <&topckgen CLK_TOP_CFGREG_F26M_VDO1>,
+								 <&vdosys1 CLK_VDO1_SMI_LARB2>,
+								 <&vdosys1 CLK_VDO1_SMI_LARB3>,
+								 <&vdosys1 CLK_VDO1_GALS>;
+							clock-names = "cfgck", "cfgxo", "ss-larb2",
+								      "ss-larb3", "ss-gals";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <1>;
+
+							power-domain@MT8188_POWER_DOMAIN_HDMI_TX {
+								reg = <MT8188_POWER_DOMAIN_HDMI_TX>;
+								clocks = <&topckgen CLK_TOP_HDMI_APB>,
+									 <&topckgen CLK_TOP_HDCP_24M>;
+								clock-names = "bus", "hdcp";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8188_POWER_DOMAIN_DP_TX {
+								reg = <MT8188_POWER_DOMAIN_DP_TX>;
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8188_POWER_DOMAIN_EDP_TX {
+								reg = <MT8188_POWER_DOMAIN_EDP_TX>;
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_VENC {
+							reg = <MT8188_POWER_DOMAIN_VENC>;
+							clocks = <&vencsys CLK_VENC1_LARB>,
+								 <&vencsys CLK_VENC1_VENC>,
+								 <&vencsys CLK_VENC1_GALS>,
+								 <&vencsys CLK_VENC1_GALS_SRAM>;
+							clock-names = "ss-ve1-larb", "ss-ve1-core",
+								      "ss-ve1-gals", "ss-ve1-sram";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_WPE {
+							reg = <MT8188_POWER_DOMAIN_WPE>;
+							clocks = <&wpesys CLK_WPE_TOP_SMI_LARB7>,
+								 <&wpesys CLK_WPE_TOP_SMI_LARB7_PCLK_EN>;
+							clock-names = "ss-wpe-l7", "ss-wpe-l7pce";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8188_POWER_DOMAIN_PEXTP_MAC_P0 {
+					reg = <MT8188_POWER_DOMAIN_PEXTP_MAC_P0>;
+					mediatek,infracfg = <&infracfg_ao>;
+					clocks = <&pericfg_ao CLK_PERI_AO_PCIE_P0_FMEM>;
+					clock-names = "ss-pextp-fmem";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8188_POWER_DOMAIN_CSIRX_TOP {
+					reg = <MT8188_POWER_DOMAIN_CSIRX_TOP>;
+					clocks = <&topckgen CLK_TOP_SENINF>,
+						 <&topckgen CLK_TOP_SENINF1>;
+					clock-names = "seninf0", "seninf1";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8188_POWER_DOMAIN_PEXTP_PHY_TOP {
+					reg = <MT8188_POWER_DOMAIN_PEXTP_PHY_TOP>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8188_POWER_DOMAIN_ADSP_AO {
+					reg = <MT8188_POWER_DOMAIN_ADSP_AO>;
+					clocks = <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>,
+						 <&topckgen CLK_TOP_ADSP>;
+					clock-names = "bus", "main";
+					mediatek,infracfg = <&infracfg_ao>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8188_POWER_DOMAIN_ADSP_INFRA {
+						reg = <MT8188_POWER_DOMAIN_ADSP_INFRA>;
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8188_POWER_DOMAIN_AUDIO_ASRC {
+							reg = <MT8188_POWER_DOMAIN_AUDIO_ASRC>;
+							clocks = <&topckgen CLK_TOP_ASM_H>;
+							clock-names = "asm";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_AUDIO {
+							reg = <MT8188_POWER_DOMAIN_AUDIO>;
+							clocks = <&topckgen CLK_TOP_A1SYS_HP>,
+								 <&topckgen CLK_TOP_AUD_INTBUS>,
+								 <&adsp_audio26m CLK_AUDIODSP_AUDIO26M>;
+							clock-names = "a1sys", "intbus", "adspck";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_ADSP {
+							reg = <MT8188_POWER_DOMAIN_ADSP>;
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8188_POWER_DOMAIN_ETHER {
+					reg = <MT8188_POWER_DOMAIN_ETHER>;
+					clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>;
+					clock-names = "ethermac";
+					mediatek,infracfg = <&infracfg_ao>;
+					#power-domain-cells = <0>;
+				};
+			};
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8188-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			mediatek,disable-extrst;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8188-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		systimer: timer@10017000 {
+			compatible = "mediatek,mt8188-timer", "mediatek,mt6765-timer";
+			reg = <0 0x10017000 0 0x1000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk13m>;
+		};
+
+		pwrap: pwrap@10024000 {
+			compatible = "mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap", "syscon";
+			reg = <0 0x10024000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>;
+			clock-names = "spi", "wrap";
+		};
+
+		spmi: spmi@10027000 {
+			compatible = "mediatek,mt8188-spmi", "mediatek,mt8195-spmi";
+			reg = <0 0x10027000 0 0xe00>, <0 0x10029000 0 0x100>;
+			reg-names = "pmif", "spmimst";
+			assigned-clocks = <&topckgen CLK_TOP_SPMI_M_MST>;
+			assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>,
+				 <&topckgen CLK_TOP_SPMI_M_MST>;
+			clock-names = "pmif_sys_ck", "pmif_tmr_ck", "spmimst_clk_mux";
+		};
+
+		infra_iommu: iommu@10315000 {
+			compatible = "mediatek,mt8188-iommu-infra";
+			reg = <0 0x10315000 0 0x1000>;
+			interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH 0>;
+			#iommu-cells = <1>;
+		};
+
+		gce0: mailbox@10320000 {
+			compatible = "mediatek,mt8188-gce";
+			reg = <0 0x10320000 0 0x4000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_GCE>;
+		};
+
+		gce1: mailbox@10330000 {
+			compatible = "mediatek,mt8188-gce";
+			reg = <0 0x10330000 0 0x4000>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_GCE2>;
+		};
+
+		scp_cluster: scp@10720000 {
+			compatible = "mediatek,mt8188-scp-dual";
+			reg = <0 0x10720000 0 0xe0000>;
+			reg-names = "cfg";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x10500000 0x100000>;
+			status = "disabled";
+
+			scp_c0: scp@0 {
+				compatible = "mediatek,scp-core";
+				reg = <0x0 0xd0000>;
+				reg-names = "sram";
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
+				status = "disabled";
+			};
+
+			scp_c1: scp@d0000 {
+				compatible = "mediatek,scp-core";
+				reg = <0xd0000 0x2f000>;
+				reg-names = "sram";
+				interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH 0>;
+				status = "disabled";
+			};
+		};
+
+		afe: audio-controller@10b10000 {
+			compatible = "mediatek,mt8188-afe";
+			reg = <0 0x10b10000 0 0x10000>;
+			assigned-clocks = <&topckgen CLK_TOP_A1SYS_HP>;
+			assigned-clock-parents = <&topckgen CLK_TOP_APLL1_D4>;
+			clocks = <&clk26m>,
+				 <&apmixedsys CLK_APMIXED_APLL1>,
+				 <&apmixedsys CLK_APMIXED_APLL2>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV0>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV1>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV2>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV3>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV9>,
+				 <&topckgen CLK_TOP_A1SYS_HP>,
+				 <&topckgen CLK_TOP_AUD_INTBUS>,
+				 <&topckgen CLK_TOP_AUDIO_H>,
+				 <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>,
+				 <&topckgen CLK_TOP_DPTX>,
+				 <&topckgen CLK_TOP_I2SO1>,
+				 <&topckgen CLK_TOP_I2SO2>,
+				 <&topckgen CLK_TOP_I2SI1>,
+				 <&topckgen CLK_TOP_I2SI2>,
+				 <&adsp_audio26m CLK_AUDIODSP_AUDIO26M>,
+				 <&topckgen CLK_TOP_APLL1_D4>,
+				 <&topckgen CLK_TOP_APLL2_D4>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV4>,
+				 <&topckgen CLK_TOP_A2SYS>,
+				 <&topckgen CLK_TOP_AUD_IEC>;
+			clock-names = "clk26m",
+				      "apll1",
+				      "apll2",
+				      "apll12_div0",
+				      "apll12_div1",
+				      "apll12_div2",
+				      "apll12_div3",
+				      "apll12_div9",
+				      "top_a1sys_hp",
+				      "top_aud_intbus",
+				      "top_audio_h",
+				      "top_audio_local_bus",
+				      "top_dptx",
+				      "top_i2so1",
+				      "top_i2so2",
+				      "top_i2si1",
+				      "top_i2si2",
+				      "adsp_audio_26m",
+				      "apll1_d4",
+				      "apll2_d4",
+				      "apll12_div4",
+				      "top_a2sys",
+				      "top_aud_iec";
+			interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_AUDIO>;
+			resets = <&watchdog MT8188_TOPRGU_AUDIO_SW_RST>;
+			reset-names = "audiosys";
+			mediatek,infracfg = <&infracfg_ao>;
+			mediatek,topckgen = <&topckgen>;
+			status = "disabled";
+		};
+
+		adsp: adsp@10b80000 {
+			compatible = "mediatek,mt8188-dsp";
+			reg = <0 0x10b80000 0 0x2000>,
+			      <0 0x10d00000 0 0x80000>,
+			      <0 0x10b8b000 0 0x100>,
+			      <0 0x10b8f000 0 0x1000>;
+			reg-names = "cfg", "sram", "sec", "bus";
+			assigned-clocks = <&topckgen CLK_TOP_ADSP>;
+			clocks = <&topckgen CLK_TOP_ADSP>,
+				 <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>;
+			clock-names = "audiodsp", "adsp_bus";
+			mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+			mbox-names = "rx", "tx";
+			power-domains = <&spm MT8188_POWER_DOMAIN_ADSP>;
+			status = "disabled";
+		};
+
+		adsp_mailbox0: mailbox@10b86100 {
+			compatible = "mediatek,mt8188-adsp-mbox", "mediatek,mt8186-adsp-mbox";
+			reg = <0 0x10b86100 0 0x1000>;
+			interrupts = <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <0>;
+		};
+
+		adsp_mailbox1: mailbox@10b87100 {
+			compatible = "mediatek,mt8188-adsp-mbox", "mediatek,mt8186-adsp-mbox";
+			reg = <0 0x10b87100 0 0x1000>;
+			interrupts = <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <0>;
+		};
+
+		adsp_audio26m: clock-controller@10b91100 {
+			compatible = "mediatek,mt8188-adsp-audio26m";
+			reg = <0 0x10b91100 0 0x100>;
+			#clock-cells = <1>;
+		};
+
+		uart0: serial@11001100 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001100 0 0x100>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11001200 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001200 0 0x100>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11001300 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001300 0 0x100>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart3: serial@11001400 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001400 0 0x100>;
+			interrupts = <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART3>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		auxadc: adc@11002000 {
+			compatible = "mediatek,mt8188-auxadc", "mediatek,mt8173-auxadc";
+			reg = <0 0x11002000 0 0x1000>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		pericfg_ao: syscon@11003000 {
+			compatible = "mediatek,mt8188-pericfg-ao", "syscon";
+			reg = <0 0x11003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		lvts_ap: thermal-sensor@1100b000 {
+			compatible = "mediatek,mt8188-lvts-ap";
+			reg = <0 0x1100b000 0 0xc00>;
+			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			resets = <&infracfg_ao MT8188_INFRA_RST1_THERMAL_CTRL_RST>;
+			nvmem-cells = <&lvts_efuse_data1>;
+			nvmem-cell-names = "lvts-calib-data-1";
+			#thermal-sensor-cells = <1>;
+		};
+
+		disp_pwm0: pwm@1100e000 {
+			compatible = "mediatek,mt8188-disp-pwm", "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100e000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM0>,
+				 <&infracfg_ao CLK_INFRA_AO_DISP_PWM>;
+			clock-names = "main", "mm";
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH 0>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		disp_pwm1: pwm@1100f000 {
+			compatible = "mediatek,mt8188-disp-pwm", "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100f000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM1>,
+				 <&infracfg_ao CLK_INFRA_AO_DISP_PWM1>;
+			clock-names = "main", "mm";
+			interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH 0>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		spi1: spi@11010000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11010000 0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI1>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi2: spi@11012000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11012000 0 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI2>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi3: spi@11013000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11013000 0 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI3>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi4: spi@11018000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11018000 0 0x1000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI4>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi5: spi@11019000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11019000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI5>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		ssusb1: usb@11201000 {
+			compatible = "mediatek,mt8188-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2dff>, <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			ranges = <0 0 0 0x11200000 0 0x3f00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x468 2>;
+			status = "disabled";
+
+			xhci1: usb@0 {
+				compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+				reg = <0 0 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+				assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+				clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_XHCI>;
+				clock-names = "sys_ck";
+				status = "disabled";
+			};
+		};
+
+		eth: ethernet@11021000 {
+			compatible = "mediatek,mt8188-gmac", "mediatek,mt8195-gmac",
+				     "snps,dwmac-5.10a";
+			reg = <0 0x11021000 0 0x4000>;
+			interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "macirq";
+			clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET>,
+				 <&pericfg_ao CLK_PERI_AO_ETHERNET_BUS>,
+				 <&topckgen CLK_TOP_SNPS_ETH_250M>,
+				 <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
+				 <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>,
+				 <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>;
+			clock-names = "axi", "apb", "mac_main", "ptp_ref",
+				      "rmii_internal", "mac_cg";
+			assigned-clocks = <&topckgen CLK_TOP_SNPS_ETH_250M>,
+					  <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
+					  <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>;
+			assigned-clock-parents = <&topckgen CLK_TOP_ETHPLL_D2>,
+						 <&topckgen CLK_TOP_ETHPLL_D8>,
+						 <&topckgen CLK_TOP_ETHPLL_D10>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_ETHER>;
+			mediatek,pericfg = <&infracfg_ao>;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup>;
+			snps,mtl-tx-config = <&mtl_tx_setup>;
+			snps,txpbl = <16>;
+			snps,rxpbl = <16>;
+			snps,clk-csr = <0>;
+			status = "disabled";
+
+			eth_mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			stmmac_axi_setup: stmmac-axi-config {
+				snps,blen = <0 0 0 0 16 8 4>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,wr_osr_lmt = <0x7>;
+			};
+
+			mtl_rx_setup: rx-queues-config {
+				snps,rx-queues-to-use = <4>;
+				snps,rx-sched-sp;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+			};
+
+			mtl_tx_setup: tx-queues-config {
+				snps,tx-queues-to-use = <4>;
+				snps,tx-sched-wrr;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x0>;
+					snps,weight = <0x10>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+					snps,weight = <0x11>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+					snps,weight = <0x12>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x3>;
+					snps,weight = <0x13>;
+				};
+			};
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x10000>,
+			      <0 0x11f50000 0 0x1000>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>,
+				 <&infracfg_ao CLK_INFRA_AO_RG_AES_MSDCFDE_CK_0P>;
+			clock-names = "source", "hclk", "source_cg", "crypto_clk";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11eb0000 0 0x1000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@11250000 {
+			compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11250000 0 0x1000>,
+			      <0 0x11e60000 0 0x1000>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC30_2>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC2>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC30_2>;
+			clock-names = "source", "hclk", "source_cg";
+			assigned-clocks = <&topckgen CLK_TOP_MSDC30_2>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+			status = "disabled";
+		};
+
+		lvts_mcu: thermal-sensor@11278000 {
+			compatible = "mediatek,mt8188-lvts-mcu";
+			reg = <0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			resets = <&infracfg_ao MT8188_INFRA_RST1_THERMAL_MCU_RST>;
+			nvmem-cells = <&lvts_efuse_data1>;
+			nvmem-cell-names = "lvts-calib-data-1";
+			#thermal-sensor-cells = <1>;
+		};
+
+		i2c0: i2c@11280000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11280000 0 0x1000>,
+			      <0 0x10220080 0 0x80>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C0>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11281000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11281000 0 0x1000>,
+			      <0 0x10220180 0 0x80>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C2>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@11282000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11282000 0 0x1000>,
+			      <0 0x10220280 0 0x80>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C3>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_c: clock-controller@11283000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-c";
+			reg = <0 0x11283000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ssusb2: usb@112a1000 {
+			compatible = "mediatek,mt8188-mtu3", "mediatek,mtu3";
+			reg = <0 0x112a1000 0 0x2dff>, <0 0x112a3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			ranges = <0 0 0 0x112a0000 0 0x3f00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_P3_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			phys = <&u2port2 PHY_TYPE_USB2>;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x470 2>;
+			status = "disabled";
+
+			xhci2: usb@0 {
+				compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+				reg = <0 0 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+				assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_3P>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+				clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
+				clock-names = "sys_ck";
+				status = "disabled";
+			};
+		};
+
+		ssusb0: usb@112b1000 {
+			compatible = "mediatek,mt8188-mtu3", "mediatek,mtu3";
+			reg = <0 0x112b1000 0 0x2dff>, <0 0x112b3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			ranges = <0 0 0 0x112b0000 0 0x3f00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_2P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_P2_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			phys = <&u2port0 PHY_TYPE_USB2>;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x460 2>;
+			status = "disabled";
+
+			xhci0: usb@0 {
+				compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+				reg = <0 0 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+				assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+				clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
+				clock-names = "sys_ck";
+				status = "disabled";
+			};
+		};
+
+		pcie: pcie@112f0000 {
+			compatible = "mediatek,mt8188-pcie", "mediatek,mt8192-pcie";
+			reg = <0 0x112f0000 0 0x2000>;
+			reg-names = "pcie-mac";
+			ranges = <0x82000000 0 0x20000000 0 0x20000000 0 0x4000000>;
+			bus-range = <0 0xff>;
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P0>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_26M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_96M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_32K>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_PERI_26M>,
+				 <&pericfg_ao CLK_PERI_AO_PCIE_P0_FMEM>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m", "tl_32k",
+				      "peri_26m", "peri_mem";
+
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,
+					<0 0 0 2 &pcie_intc 1>,
+					<0 0 0 3 &pcie_intc 2>,
+					<0 0 0 4 &pcie_intc 3>;
+			interrupt-map-mask = <0 0 0 7>;
+
+			iommu-map = <0 &infra_iommu IFR_IOMMU_PORT_PCIE_0 0xffff>;
+			iommu-map-mask = <0>;
+
+			phys = <&pcieport PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+
+			power-domains = <&spm MT8188_POWER_DOMAIN_PEXTP_MAC_P0>;
+
+			resets = <&watchdog MT8188_TOPRGU_PCIE_SW_RST>;
+			reset-names = "mac";
+
+			status = "disabled";
+
+			pcie_intc: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		nor_flash: spi@1132c000 {
+			compatible = "mediatek,mt8188-nor", "mediatek,mt8186-nor";
+			reg = <0 0x1132c000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_SPINOR>,
+				 <&pericfg_ao CLK_PERI_AO_FLASHIFLASHCK>,
+				 <&pericfg_ao CLK_PERI_AO_FLASHIF_BUS>;
+			clock-names = "spi", "sf", "axi";
+			assigned-clocks = <&topckgen CLK_TOP_SPINOR>;
+			interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pciephy: t-phy@11c20700 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			ranges = <0 0 0x11c20700 0x700>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_PEXTP_PHY_TOP>;
+			status = "disabled";
+
+			pcieport: pcie-phy@0 {
+				reg = <0 0x700>;
+				clocks = <&topckgen CLK_TOP_CFGREG_F_PCIE_PHY_REF>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		mipi_tx_config0: dsi-phy@11c80000 {
+			compatible = "mediatek,mt8188-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c80000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		mipi_tx_config1: dsi-phy@11c90000 {
+			compatible = "mediatek,mt8188-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c90000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11e00000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11e00000 0 0x1000>,
+			      <0 0x10220100 0 0x80>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C1>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11e01000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11e01000 0 0x1000>,
+			      <0 0x10220380 0 0x80>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C4>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_w: clock-controller@11e02000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-w";
+			reg = <0 0x11e02000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		u3phy0: t-phy@11e30000 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e30000 0x1000>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		u3phy1: t-phy@11e40000 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e40000 0x1000>;
+			status = "disabled";
+
+			u2port1: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u3port1: usb-phy@700 {
+				reg = <0x700 0x700>;
+				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>,
+					 <&clk26m>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		u3phy2: t-phy@11e80000 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e80000 0x1000>;
+			status = "disabled";
+
+			u2port2: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		i2c5: i2c@11ec0000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11ec0000 0 0x1000>,
+			      <0 0x10220480 0 0x80>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C5>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@11ec1000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11ec1000 0 0x1000>,
+			      <0 0x10220600 0 0x80>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C6>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_en: clock-controller@11ec2000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-en";
+			reg = <0 0x11ec2000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		efuse: efuse@11f20000 {
+			compatible = "mediatek,mt8188-efuse", "mediatek,mt8186-efuse";
+			reg = <0 0x11f20000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			dp_calib_data: dp-calib@1a0 {
+				reg = <0x1a0 0xc>;
+			};
+
+			lvts_efuse_data1: lvts1-calib@1ac {
+				reg = <0x1ac 0x40>;
+			};
+
+			gpu_speedbin: gpu-speedbin@581 {
+				reg = <0x581 0x1>;
+				bits = <0 3>;
+			};
+
+			socinfo-data1@7a0 {
+				reg = <0x7a0 0x4>;
+			};
+
+			socinfo-data2@7e0 {
+				reg = <0x7e0 0x4>;
+			};
+		};
+
+		gpu: gpu@13000000 {
+			compatible = "mediatek,mt8188-mali", "arm,mali-valhall-jm";
+			reg = <0 0x13000000 0 0x4000>;
+
+			clocks = <&mfgcfg CLK_MFGCFG_BG3D>;
+			interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "job", "mmu", "gpu";
+			nvmem-cells = <&gpu_speedbin>;
+			nvmem-cell-names = "speed-bin";
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_MFG2>,
+					<&spm MT8188_POWER_DOMAIN_MFG3>,
+					<&spm MT8188_POWER_DOMAIN_MFG4>;
+			power-domain-names = "core0", "core1", "core2";
+			#cooling-cells = <2>;
+			status = "disabled";
+		};
+
+		mfgcfg: clock-controller@13fbf000 {
+			compatible = "mediatek,mt8188-mfgcfg";
+			reg = <0 0x13fbf000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vppsys0: syscon@14000000 {
+			compatible = "mediatek,mt8188-vppsys0", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		dma-controller@14001000 {
+			compatible = "mediatek,mt8188-mdp3-rdma";
+			reg = <0 0x14001000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RDMA>;
+			mboxes = <&gce0 13 CMDQ_THR_PRIO_1>,
+				 <&gce0 14 CMDQ_THR_PRIO_1>,
+				 <&gce0 16 CMDQ_THR_PRIO_1>,
+				 <&gce0 21 CMDQ_THR_PRIO_1>,
+				 <&gce0 22 CMDQ_THR_PRIO_1>;
+			iommus = <&vpp_iommu M4U_PORT_L4_MDP_RDMA>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RDMA_FRAME_DONE>;
+			mediatek,scp = <&scp_c0>;
+		};
+
+		display@14002000 {
+			compatible = "mediatek,mt8188-mdp3-fg", "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14002000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_FG>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>;
+		};
+
+		display@14004000 {
+			compatible = "mediatek,mt8188-mdp3-hdr", "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14004000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_HDR>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>;
+		};
+
+		display@14005000 {
+			compatible = "mediatek,mt8188-mdp3-aal", "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14005000 0 0x1000>;
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_AAL>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x5000 0x1000>;
+		};
+
+		display@14006000 {
+			compatible = "mediatek,mt8188-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14006000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RSZ>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RSZ_IN_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RSZ_FRAME_DONE>;
+		};
+
+		display@14007000 {
+			compatible = "mediatek,mt8188-mdp3-tdshp", "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14007000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>;
+		};
+
+		display@14008000 {
+			compatible = "mediatek,mt8188-mdp3-color", "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14008000 0 0x1000>;
+			interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_COLOR>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x8000 0x1000>;
+		};
+
+		display@14009000 {
+			compatible = "mediatek,mt8188-mdp3-ovl", "mediatek,mt8195-mdp3-ovl";
+			reg = <0 0x14009000 0 0x1000>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_OVL>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x9000 0x1000>;
+			iommus = <&vpp_iommu M4U_PORT_L4_MDP_OVL>;
+		};
+
+		display@1400a000 {
+			compatible = "mediatek,mt8188-mdp3-padding", "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x1400a000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_PADDING>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xa000 0x1000>;
+		};
+
+		display@1400b000 {
+			compatible = "mediatek,mt8188-mdp3-tcc", "mediatek,mt8195-mdp3-tcc";
+			reg = <0 0x1400b000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TCC>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>;
+		};
+
+		display@1400c000 {
+			compatible = "mediatek,mt8188-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x1400c000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_WROT>;
+			iommus = <&vpp_iommu M4U_PORT_L4_MDP_WROT>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xc000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_WROT_VIDO_WDONE>;
+		};
+
+		mutex@1400f000 {
+			compatible = "mediatek,mt8188-vpp-mutex";
+			reg = <0 0x1400f000 0 0x1000>;
+			interrupts = <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_MUTEX>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xf000 0x1000>;
+		};
+
+		vpp_smi_common: smi@14012000 {
+			compatible = "mediatek,mt8188-smi-common-vpp";
+			reg = <0 0x14012000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>,
+				 <&vppsys0 CLK_VPP0_SMI_SUB_COMMON_REORDER>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		larb4: smi@14013000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x14013000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>,
+				 <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,larb-id = <SMI_L4_ID>;
+			mediatek,smi = <&vpp_smi_common>;
+		};
+
+		vpp_iommu: iommu@14018000 {
+			compatible = "mediatek,mt8188-iommu-vpp";
+			reg = <0 0x14018000 0 0x5000>;
+			clocks = <&vppsys0 CLK_VPP0_SMI_IOMMU>;
+			clock-names = "bclk";
+			interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			#iommu-cells = <1>;
+			mediatek,larbs = <&larb1 &larb3 &larb4 &larb6 &larb7 &larb23>;
+		};
+
+		dma-controller@14f09000 {
+			compatible = "mediatek,mt8188-mdp3-rdma";
+			reg = <0 0x14f09000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RDMA>;
+			iommus = <&vdo_iommu M4U_PORT_L5_SVPP2_MDP_RDMA>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x9000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_FRAME_DONE>;
+		};
+
+		dma-controller@14f0a000 {
+			compatible = "mediatek,mt8188-mdp3-rdma";
+			reg = <0 0x14f0a000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RDMA>;
+			iommus = <&vpp_iommu M4U_PORT_L6_SVPP3_MDP_RDMA>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xa000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_FRAME_DONE>;
+		};
+
+		display@14f0c000 {
+			compatible = "mediatek,mt8188-mdp3-fg", "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0c000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_FG>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xc000 0x1000>;
+		};
+
+		display@14f0d000 {
+			compatible = "mediatek,mt8188-mdp3-fg", "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0d000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_FG>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xd000 0x1000>;
+		};
+
+		display@14f0f000 {
+			compatible = "mediatek,mt8188-mdp3-hdr", "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f0f000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_HDR>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xf000 0x1000>;
+		};
+
+		display@14f10000 {
+			compatible = "mediatek,mt8188-mdp3-hdr", "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f10000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_HDR>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0 0x1000>;
+		};
+
+		display@14f12000 {
+			compatible = "mediatek,mt8188-mdp3-aal", "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f12000 0 0x1000>;
+			interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_AAL>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x2000 0x1000>;
+		};
+
+		display@14f13000 {
+			compatible = "mediatek,mt8188-mdp3-aal", "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f13000 0 0x1000>;
+			interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_AAL>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x3000 0x1000>;
+		};
+
+		display@14f15000 {
+			compatible = "mediatek,mt8188-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f15000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RSZ>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_FRAME_DONE>;
+		};
+
+		display@14f16000 {
+			compatible = "mediatek,mt8188-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f16000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RSZ>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_FRAME_DONE>;
+		};
+
+		display@14f18000 {
+			compatible = "mediatek,mt8188-mdp3-tdshp", "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f18000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_TDSHP>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x8000 0x1000>;
+		};
+
+		display@14f19000 {
+			compatible = "mediatek,mt8188-mdp3-tdshp", "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f19000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_TDSHP>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x9000 0x1000>;
+		};
+
+		display@14f1a000 {
+			compatible = "mediatek,mt8188-mdp3-merge", "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1a000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_MERGE>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xa000 0x1000>;
+		};
+
+		display@14f1b000 {
+			compatible = "mediatek,mt8188-mdp3-merge", "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1b000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_MERGE>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xb000 0x1000>;
+		};
+
+		display@14f1d000 {
+			compatible = "mediatek,mt8188-mdp3-color", "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1d000 0 0x1000>;
+			interrupts = <GIC_SPI 629 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_COLOR>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xd000 0x1000>;
+		};
+
+		display@14f1e000 {
+			compatible = "mediatek,mt8188-mdp3-color", "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1e000 0 0x1000>;
+			interrupts = <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_COLOR>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xe000 0x1000>;
+		};
+
+		display@14f21000 {
+			compatible = "mediatek,mt8188-mdp3-padding",
+				     "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f21000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_PAD>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x1000 0x1000>;
+		};
+
+		display@14f22000 {
+			compatible = "mediatek,mt8188-mdp3-padding",
+				     "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f22000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_PAD>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x2000 0x1000>;
+		};
+
+		display@14f24000 {
+			compatible = "mediatek,mt8188-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f24000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_WROT>;
+			iommus = <&vdo_iommu M4U_PORT_L5_SVPP2_MDP_WROT>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_FRAME_DONE>;
+		};
+
+		display@14f25000 {
+			compatible = "mediatek,mt8188-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f25000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_WROT>;
+			iommus = <&vpp_iommu M4U_PORT_L6_SVPP3_MDP_WROT>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_FRAME_DONE>;
+		};
+
+		wpesys: clock-controller@14e00000 {
+			compatible = "mediatek,mt8188-wpesys";
+			reg = <0 0x14e00000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		wpesys_vpp0: clock-controller@14e02000 {
+			compatible = "mediatek,mt8188-wpesys-vpp0";
+			reg = <0 0x14e02000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb7: smi@14e04000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x14e04000 0 0x1000>;
+			clocks = <&wpesys CLK_WPE_TOP_SMI_LARB7>,
+				 <&wpesys CLK_WPE_TOP_SMI_LARB7>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_WPE>;
+			mediatek,larb-id = <SMI_L7_ID>;
+			mediatek,smi = <&vpp_smi_common>;
+		};
+
+		vppsys1: syscon@14f00000 {
+			compatible = "mediatek,mt8188-vppsys1", "syscon";
+			reg = <0 0x14f00000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mutex@14f01000 {
+			compatible = "mediatek,mt8188-vpp-mutex";
+			reg = <0 0x14f01000 0 0x1000>;
+			interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_DISP_MUTEX>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x1000 0x1000>;
+		};
+
+		larb5: smi@14f02000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x14f02000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_GALS5>,
+				 <&vppsys1 CLK_VPP1_LARB5>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,larb-id = <SMI_L5_ID>;
+			mediatek,smi = <&vdo_smi_common>;
+		};
+
+		larb6: smi@14f03000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x14f03000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_GALS6>,
+				 <&vppsys1 CLK_VPP1_LARB6>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,larb-id = <SMI_L6_ID>;
+			mediatek,smi = <&vpp_smi_common>;
+		};
+
+		imgsys: clock-controller@15000000 {
+			compatible = "mediatek,mt8188-imgsys";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys1_dip_top: clock-controller@15110000 {
+			compatible = "mediatek,mt8188-imgsys1-dip-top";
+			reg = <0 0x15110000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		imgsys1_dip_nr: clock-controller@15130000 {
+			compatible = "mediatek,mt8188-imgsys1-dip-nr";
+			reg = <0 0x15130000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		imgsys_wpe1: clock-controller@15220000 {
+			compatible = "mediatek,mt8188-imgsys-wpe1";
+			reg = <0 0x15220000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		ipesys: clock-controller@15330000 {
+			compatible = "mediatek,mt8188-ipesys";
+			reg = <0 0x15330000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		imgsys_wpe2: clock-controller@15520000 {
+			compatible = "mediatek,mt8188-imgsys-wpe2";
+			reg = <0 0x15520000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		imgsys_wpe3: clock-controller@15620000 {
+			compatible = "mediatek,mt8188-imgsys-wpe3";
+			reg = <0 0x15620000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		camsys: clock-controller@16000000 {
+			compatible = "mediatek,mt8188-camsys";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawa: clock-controller@1604f000 {
+			compatible = "mediatek,mt8188-camsys-rawa";
+			reg = <0 0x1604f000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		camsys_yuva: clock-controller@1606f000 {
+			compatible = "mediatek,mt8188-camsys-yuva";
+			reg = <0 0x1606f000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		camsys_rawb: clock-controller@1608f000 {
+			compatible = "mediatek,mt8188-camsys-rawb";
+			reg = <0 0x1608f000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		camsys_yuvb: clock-controller@160af000 {
+			compatible = "mediatek,mt8188-camsys-yuvb";
+			reg = <0 0x160af000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		ccusys: clock-controller@17200000 {
+			compatible = "mediatek,mt8188-ccusys";
+			reg = <0 0x17200000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		video_decoder: video-decoder@18000000 {
+			compatible = "mediatek,mt8188-vcodec-dec";
+			reg = <0 0x18000000 0 0x1000>, <0 0x18004000 0 0x1000>;
+			ranges = <0 0 0 0x18000000 0 0x26000>;
+			iommus = <&vpp_iommu M4U_PORT_L23_HW_VDEC_UFO_ENC_EXT>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			mediatek,scp = <&scp_c0>;
+
+			video-codec@10000 {
+				compatible = "mediatek,mtk-vcodec-lat";
+				reg = <0 0x10000 0 0x800>;
+				assigned-clocks = <&topckgen CLK_TOP_VDEC>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6>;
+				clocks = <&topckgen CLK_TOP_VDEC>,
+					 <&vdecsys_soc CLK_VDEC1_SOC_VDEC>,
+					 <&vdecsys_soc CLK_VDEC1_SOC_LAT>,
+					 <&topckgen CLK_TOP_UNIVPLL_D6>;
+				clock-names = "sel", "vdec", "lat", "top";
+				interrupts = <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&vpp_iommu M4U_PORT_L23_HW_VDEC_LAT0_VLD_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_LAT0_VLD2_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_LAT0_AVC_MV_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_LAT0_PRED_RD_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_LAT0_TILE_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_LAT0_WDMA_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_UFO_ENC_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_UFO_ENC_EXT_C>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_MC_EXT_C>;
+				power-domains = <&spm MT8188_POWER_DOMAIN_VDEC0>;
+			};
+
+			video-codec@25000 {
+				compatible = "mediatek,mtk-vcodec-core";
+				reg = <0 0x25000 0 0x1000>;
+				assigned-clocks = <&topckgen CLK_TOP_VDEC>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6>;
+				clocks = <&topckgen CLK_TOP_VDEC>,
+					 <&vdecsys CLK_VDEC2_VDEC>,
+					 <&vdecsys CLK_VDEC2_LAT>,
+					 <&topckgen CLK_TOP_UNIVPLL_D6>;
+				clock-names = "sel", "vdec", "lat", "top";
+				interrupts = <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&vdo_iommu M4U_PORT_L21_HW_VDEC_MC_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_UFO_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_PP_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_PRED_RD_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_PRED_WR_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_PPWRAP_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_TILE_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_VLD_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_VLD2_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_AVC_MV_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_UFO_EXT_C>;
+				power-domains = <&spm MT8188_POWER_DOMAIN_VDEC1>;
+			};
+		};
+
+		larb23: smi@1800d000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x1800d000 0 0x1000>;
+			clocks = <&vdecsys_soc CLK_VDEC1_SOC_LARB1>,
+				 <&vdecsys_soc CLK_VDEC1_SOC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDEC0>;
+			mediatek,larb-id = <SMI_L23_ID>;
+			mediatek,smi = <&vpp_smi_common>;
+		};
+
+		vdecsys_soc: clock-controller@1800f000 {
+			compatible = "mediatek,mt8188-vdecsys-soc";
+			reg = <0 0x1800f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb21: smi@1802e000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x1802e000 0 0x1000>;
+			clocks = <&vdecsys CLK_VDEC2_LARB1>,
+				 <&vdecsys CLK_VDEC2_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDEC1>;
+			mediatek,larb-id = <SMI_L21_ID>;
+			mediatek,smi = <&vdo_smi_common>;
+		};
+
+		vdecsys: clock-controller@1802f000 {
+			compatible = "mediatek,mt8188-vdecsys";
+			reg = <0 0x1802f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@1a000000 {
+			compatible = "mediatek,mt8188-vencsys";
+			reg = <0 0x1a000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb19: smi@1a010000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x1a010000 0 0x1000>;
+			clocks = <&vencsys CLK_VENC1_VENC>,
+				 <&vencsys CLK_VENC1_VENC>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VENC>;
+			mediatek,larb-id = <SMI_L19_ID>;
+			mediatek,smi = <&vdo_smi_common>;
+		};
+
+		video_encoder: video-encoder@1a020000 {
+			compatible = "mediatek,mt8188-vcodec-enc";
+			reg = <0 0x1a020000 0 0x10000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			assigned-clocks = <&topckgen CLK_TOP_VENC>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+			clocks = <&vencsys CLK_VENC1_VENC>;
+			clock-names = "venc_sel";
+			interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L19_VENC_RCPU>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_REC>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_BSDMA>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_SV_COMV>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_RD_COMV>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_CUR_LUMA>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_CUR_CHROMA>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_REF_LUMA>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_REF_CHROMA>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_SUB_W_LUMA>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_SUB_R_LUMA>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VENC>;
+			mediatek,scp = <&scp_c0>;
+		};
+
+		jpeg_encoder: jpeg-encoder@1a030000 {
+			compatible = "mediatek,mt8188-jpgenc", "mediatek,mtk-jpgenc";
+			reg = <0 0x1a030000 0 0x10000>;
+			clocks = <&vencsys CLK_VENC1_JPGENC>;
+			clock-names = "jpgenc";
+			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L19_JPGENC_Y_RDMA>,
+				 <&vdo_iommu M4U_PORT_L19_JPGENC_C_RDMA>,
+				 <&vdo_iommu M4U_PORT_L19_JPGENC_Q_TABLE>,
+				 <&vdo_iommu M4U_PORT_L19_JPGENC_BSDMA>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VENC>;
+		};
+
+		jpeg_decoder: jpeg-decoder@1a040000 {
+			compatible = "mediatek,mt8188-jpgdec", "mediatek,mt2701-jpgdec";
+			reg = <0 0x1a040000 0 0x10000>;
+			clocks = <&vencsys CLK_VENC1_LARB>,
+				 <&vencsys CLK_VENC1_JPGDEC>;
+			clock-names = "jpgdec-smi", "jpgdec";
+			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L19_JPGDEC_WDMA_0>,
+				 <&vdo_iommu M4U_PORT_L19_JPGDEC_BSDMA_0>,
+				 <&vdo_iommu M4U_PORT_L19_JPGDEC_WDMA_1>,
+				 <&vdo_iommu M4U_PORT_L19_JPGDEC_BSDMA_1>,
+				 <&vdo_iommu M4U_PORT_L19_JPGDEC_HUFF_OFFSET_1>,
+				 <&vdo_iommu M4U_PORT_L19_JPGDEC_HUFF_OFFSET_0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDEC0>;
+		};
+
+		ovl0: ovl@1c000000 {
+			compatible = "mediatek,mt8188-disp-ovl", "mediatek,mt8195-disp-ovl";
+			reg = <0 0x1c000000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_OVL0>;
+			interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L0_DISP_OVL0_RDMA0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x0000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ovl0_in: endpoint { };
+				};
+
+				port@1 {
+					reg = <1>;
+					ovl0_out: endpoint {
+						remote-endpoint = <&rdma0_in>;
+					};
+				};
+			};
+		};
+
+		rdma0: rdma@1c002000 {
+			compatible = "mediatek,mt8188-disp-rdma", "mediatek,mt8195-disp-rdma";
+			reg = <0 0x1c002000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_RDMA0>;
+			interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vpp_iommu M4U_PORT_L1_DISP_RDMA0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x2000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					rdma0_in: endpoint {
+						remote-endpoint = <&ovl0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					rdma0_out: endpoint {
+						remote-endpoint = <&color0_in>;
+					};
+				};
+			};
+		};
+
+		color0: color@1c003000 {
+			compatible = "mediatek,mt8188-disp-color", "mediatek,mt8173-disp-color";
+			reg = <0 0x1c003000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_COLOR0>;
+			interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x3000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					color0_in: endpoint {
+						remote-endpoint = <&rdma0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					color0_out: endpoint {
+						remote-endpoint = <&ccorr0_in>;
+					};
+				};
+			};
+		};
+
+		ccorr0: ccorr@1c004000 {
+			compatible = "mediatek,mt8188-disp-ccorr", "mediatek,mt8192-disp-ccorr";
+			reg = <0 0x1c004000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_CCORR0>;
+			interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x4000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ccorr0_in: endpoint {
+						remote-endpoint = <&color0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ccorr0_out: endpoint {
+						remote-endpoint = <&aal0_in>;
+					};
+				};
+			};
+		};
+
+		aal0: aal@1c005000 {
+			compatible = "mediatek,mt8188-disp-aal", "mediatek,mt8183-disp-aal";
+			reg = <0 0x1c005000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_AAL0>;
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x5000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					aal0_in: endpoint {
+						remote-endpoint = <&ccorr0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					aal0_out: endpoint {
+						remote-endpoint = <&gamma0_in>;
+					};
+				};
+			};
+		};
+
+		gamma0: gamma@1c006000 {
+			compatible = "mediatek,mt8188-disp-gamma", "mediatek,mt8195-disp-gamma";
+			reg = <0 0x1c006000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_GAMMA0>;
+			interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x6000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					gamma0_in: endpoint {
+						remote-endpoint = <&aal0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					gamma0_out: endpoint { };
+				};
+			};
+		};
+
+		dither0: dither@1c007000 {
+			compatible = "mediatek,mt8188-disp-dither", "mediatek,mt8183-disp-dither";
+			reg = <0 0x1c007000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_DITHER0>;
+			interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dither0_in: endpoint { };
+				};
+
+				port@1 {
+					reg = <1>;
+					dither0_out: endpoint { };
+				};
+			};
+		};
+
+		disp_dsi0: dsi@1c008000 {
+			compatible = "mediatek,mt8188-dsi";
+			reg = <0 0x1c008000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DSI0>,
+				 <&vdosys0 CLK_VDO0_DSI0_DSI>,
+				 <&mipi_tx_config0>;
+			clock-names = "engine", "digital", "hs";
+			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&mipi_tx_config0>;
+			phy-names = "dphy";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			resets = <&vdosys0 MT8188_VDO0_RST_DSI0>;
+			status = "disabled";
+		};
+
+		dsc0: dsc@1c009000 {
+			compatible = "mediatek,mt8188-disp-dsc", "mediatek,mt8195-disp-dsc";
+			reg = <0 0x1c009000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DSC_WRAP0>;
+			interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x9000 0x1000>;
+		};
+
+		disp_dsi1: dsi@1c012000 {
+			compatible = "mediatek,mt8188-dsi";
+			reg = <0 0x1c012000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DSI1>,
+				 <&vdosys0 CLK_VDO0_DSI1_DSI>,
+				 <&mipi_tx_config1>;
+			clock-names = "engine", "digital", "hs";
+			interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&mipi_tx_config1>;
+			phy-names = "dphy";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			resets = <&vdosys0 MT8188_VDO0_RST_DSI1>;
+			status = "disabled";
+		};
+
+		merge0: merge0@1c014000 {
+			compatible = "mediatek,mt8188-disp-merge", "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c014000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_VPP_MERGE0>,
+				 <&vdosys1 CLK_VDO1_MERGE_VDO1_DL_ASYNC>;
+			clock-names = "merge", "merge_async";
+			interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x4000 0x1000>;
+		};
+
+		dp_intf0: dp-intf@1c015000 {
+			compatible = "mediatek,mt8188-dp-intf";
+			reg = <0 0x1c015000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>,
+				 <&vdosys0 CLK_VDO0_DP_INTF0>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL1>;
+			clock-names = "pixel", "engine", "pll";
+			interrupts = <GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			status = "disabled";
+		};
+
+		mutex0: mutex@1c016000 {
+			compatible = "mediatek,mt8188-disp-mutex";
+			reg = <0 0x1c016000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_MUTEX0>;
+			interrupts = <GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VDO0_DISP_STREAM_DONE_0>;
+		};
+
+		postmask0: postmask@1c01a000 {
+			compatible = "mediatek,mt8188-disp-postmask",
+				     "mediatek,mt8192-disp-postmask";
+			reg = <0 0x1c01a000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_POSTMASK0>;
+			interrupts = <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xa000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					postmask0_in: endpoint { };
+				};
+
+				port@1 {
+					reg = <1>;
+					postmask0_out: endpoint { };
+				};
+			};
+		};
+
+		vdosys0: syscon@1c01d000 {
+			compatible = "mediatek,mt8188-vdosys0", "syscon";
+			reg = <0 0x1c01d000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			mboxes = <&gce0 0 CMDQ_THR_PRIO_4>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xd000 0x1000>;
+		};
+
+		larb0: smi@1c022000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x1c022000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_LARB>,
+				 <&vdosys0 CLK_VDO0_SMI_LARB>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,larb-id = <SMI_L0_ID>;
+			mediatek,smi = <&vdo_smi_common>;
+		};
+
+		larb1: smi@1c023000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x1c023000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_LARB>,
+				 <&vdosys0 CLK_VDO0_SMI_LARB>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,larb-id = <SMI_L1_ID>;
+			mediatek,smi = <&vpp_smi_common>;
+		};
+
+		vdo_smi_common: smi@1c024000 {
+			compatible = "mediatek,mt8188-smi-common-vdo";
+			reg = <0 0x1c024000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_COMMON>,
+				 <&vdosys0 CLK_VDO0_SMI_GALS>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+		};
+
+		vdo_iommu: iommu@1c028000 {
+			compatible = "mediatek,mt8188-iommu-vdo";
+			reg = <0 0x1c028000 0 0x5000>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_IOMMU>;
+			clock-names = "bclk";
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			#iommu-cells = <1>;
+			mediatek,larbs = <&larb0 &larb2 &larb5 &larb19 &larb21>;
+		};
+
+		vdosys1: syscon@1c100000 {
+			compatible = "mediatek,mt8188-vdosys1", "syscon";
+			reg = <0 0x1c100000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			mboxes = <&gce0 1 CMDQ_THR_PRIO_4>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0 0x1000>;
+		};
+
+		mutex1: mutex@1c101000 {
+			compatible = "mediatek,mt8188-disp-mutex";
+			reg = <0 0x1c101000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>;
+			interrupts = <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>;
+		};
+
+		larb2: smi@1c102000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x1c102000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_SMI_LARB2>,
+				 <&vdosys1 CLK_VDO1_SMI_LARB2>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,larb-id = <SMI_L2_ID>;
+			mediatek,smi = <&vdo_smi_common>;
+		};
+
+		larb3: smi@1c103000 {
+			compatible = "mediatek,mt8188-smi-larb";
+			reg = <0 0x1c103000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_SMI_LARB3>,
+				 <&vdosys1 CLK_VDO1_SMI_LARB3>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,larb-id = <SMI_L3_ID>;
+			mediatek,smi = <&vpp_smi_common>;
+		};
+
+		vdo1_rdma0: rdma@1c104000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c104000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
+			interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L2_MDP_RDMA0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+		};
+
+		vdo1_rdma1: rdma@1c105000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c105000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA1>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vpp_iommu M4U_PORT_L3_MDP_RDMA1>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x5000 0x1000>;
+		};
+
+		vdo1_rdma2: rdma@1c106000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c106000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA2>;
+			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L2_MDP_RDMA2>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x6000 0x1000>;
+		};
+
+		vdo1_rdma3: rdma@1c107000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c107000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA3>;
+			interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vpp_iommu M4U_PORT_L3_MDP_RDMA3>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x7000 0x1000>;
+		};
+
+		vdo1_rdma4: rdma@1c108000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c108000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA4>;
+			interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L2_MDP_RDMA4>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x8000 0x1000>;
+		};
+
+		vdo1_rdma5: rdma@1c109000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c109000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA5>;
+			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vpp_iommu M4U_PORT_L3_MDP_RDMA5>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x9000 0x1000>;
+		};
+
+		vdo1_rdma6: rdma@1c10a000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c10a000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA6>;
+			interrupts = <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L2_MDP_RDMA6>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xa000 0x1000>;
+		};
+
+		vdo1_rdma7: rdma@1c10b000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c10b000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA7>;
+			interrupts = <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vpp_iommu M4U_PORT_L3_MDP_RDMA7>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xb000 0x1000>;
+		};
+
+		merge1: merge@1c10c000 {
+			compatible = "mediatek,mt8188-disp-merge", "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10c000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE0>,
+				 <&vdosys1 CLK_VDO1_MERGE0_DL_ASYNC>;
+			clock-names = "merge", "merge_async";
+			interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			resets = <&vdosys1 MT8188_VDO1_RST_MERGE0_DL_ASYNC>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xc000 0x1000>;
+			mediatek,merge-mute;
+		};
+
+		merge2: merge@1c10d000 {
+			compatible = "mediatek,mt8188-disp-merge", "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10d000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE1>,
+				 <&vdosys1 CLK_VDO1_MERGE1_DL_ASYNC>;
+			clock-names = "merge", "merge_async";
+			interrupts = <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			resets = <&vdosys1 MT8188_VDO1_RST_MERGE1_DL_ASYNC>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xd000 0x1000>;
+			mediatek,merge-mute;
+		};
+
+		merge3: merge@1c10e000 {
+			compatible = "mediatek,mt8188-disp-merge", "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10e000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE2>,
+				 <&vdosys1 CLK_VDO1_MERGE2_DL_ASYNC>;
+			clock-names = "merge", "merge_async";
+			interrupts = <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			resets = <&vdosys1 MT8188_VDO1_RST_MERGE2_DL_ASYNC>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xe000 0x1000>;
+			mediatek,merge-mute;
+		};
+
+		merge4: merge@1c10f000 {
+			compatible = "mediatek,mt8188-disp-merge", "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10f000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE3>,
+				 <&vdosys1 CLK_VDO1_MERGE3_DL_ASYNC>;
+			clock-names = "merge", "merge_async";
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			resets = <&vdosys1 MT8188_VDO1_RST_MERGE3_DL_ASYNC>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xf000 0x1000>;
+			mediatek,merge-mute;
+		};
+
+		merge5: merge@1c110000 {
+			compatible = "mediatek,mt8188-disp-merge", "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c110000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE4>,
+				 <&vdosys1 CLK_VDO1_MERGE4_DL_ASYNC>;
+			clock-names = "merge", "merge_async";
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			resets = <&vdosys1 MT8188_VDO1_RST_MERGE4_DL_ASYNC>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x0000 0x1000>;
+			mediatek,merge-fifo-en;
+		};
+
+		dp_intf1: dp-intf@1c113000 {
+			compatible = "mediatek,mt8188-dp-intf";
+			reg = <0 0x1c113000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_DPINTF>,
+				 <&vdosys1 CLK_VDO1_DP_INTF0_MMCK>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL2>;
+			clock-names = "pixel", "engine", "pll";
+			interrupts = <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			status = "disabled";
+		};
+
+		ethdr0: ethdr@1c114000 {
+			compatible = "mediatek,mt8188-disp-ethdr", "mediatek,mt8195-disp-ethdr";
+			reg = <0 0x1c114000 0 0x1000>,
+			      <0 0x1c115000 0 0x1000>,
+			      <0 0x1c117000 0 0x1000>,
+			      <0 0x1c119000 0 0x1000>,
+			      <0 0x1c11a000 0 0x1000>,
+			      <0 0x1c11b000 0 0x1000>,
+			      <0 0x1c11c000 0 0x1000>;
+			reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+				    "vdo_be", "adl_ds";
+
+			clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE0>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE1>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE0>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE1>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_BE>,
+				 <&vdosys1 CLK_VDO1_26M_SLOW>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>,
+				 <&topckgen CLK_TOP_ETHDR>;
+			clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+				      "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async",
+				      "gfx_fe0_async", "gfx_fe1_async", "vdo_be_async", "ethdr_top";
+
+			interrupts = <GIC_SPI 566 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vpp_iommu M4U_PORT_L3_HDR_DS_SMI>,
+				 <&vpp_iommu M4U_PORT_L3_HDR_ADL_SMI>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			resets = <&vdosys1 MT8188_VDO1_RST_HDR_VDO_FE0_DL_ASYNC>,
+				 <&vdosys1 MT8188_VDO1_RST_HDR_VDO_FE1_DL_ASYNC>,
+				 <&vdosys1 MT8188_VDO1_RST_HDR_GFX_FE0_DL_ASYNC>,
+				 <&vdosys1 MT8188_VDO1_RST_HDR_GFX_FE1_DL_ASYNC>,
+				 <&vdosys1 MT8188_VDO1_RST_HDR_VDO_BE_DL_ASYNC>;
+
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xa000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xb000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xc000 0x1000>;
+		};
+
+		padding0: padding@1c11d000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c11d000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>;
+		};
+
+		padding1: padding@1c11e000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c11e000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING1>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xe000 0x1000>;
+		};
+
+		padding2: padding@1c11f000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c11f000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING2>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xf000 0x1000>;
+		};
+
+		padding3: padding@1c120000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c120000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING3>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c12XXXX 0x0000 0x1000>;
+		};
+
+		padding4: padding@1c121000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c121000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING4>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c12XXXX 0x1000 0x1000>;
+		};
+
+		padding5: padding@1c122000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c122000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING5>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c12XXXX 0x2000 0x1000>;
+		};
+
+		padding6: padding@1c123000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c123000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING6>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c12XXXX 0x3000 0x1000>;
+		};
+
+		padding7: padding@1c124000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c124000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING7>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c12XXXX 0x4000 0x1000>;
+		};
+
+		edp_tx: edp-tx@1c500000 {
+			compatible = "mediatek,mt8188-edp-tx";
+			reg = <0 0x1c500000 0 0x8000>;
+			interrupts = <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH 0>;
+			nvmem-cells = <&dp_calib_data>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8188_POWER_DOMAIN_EDP_TX>;
+			max-linkrate-mhz = <8100>;
+			status = "disabled";
+		};
+
+		dp_tx: dp-tx@1c600000 {
+			compatible = "mediatek,mt8188-dp-tx";
+			reg = <0 0x1c600000 0 0x8000>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
+			nvmem-cells = <&dp_calib_data>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8188_POWER_DOMAIN_DP_TX>;
+			max-linkrate-mhz = <5400>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
index 1e91491945f6..ac2673e56fb8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
@@ -7,6 +7,7 @@
 
 / {
 	model = "Google Hayato rev1";
+	chassis-type = "convertible";
 	compatible = "google,hayato-rev1", "google,hayato", "mediatek,mt8192";
 };
 
@@ -39,9 +40,108 @@
 	>;
 };
 
+&pio {
+	bt_pins: bt-pins {
+		pins-bt-kill {
+			pinmux = <PINMUX_GPIO144__FUNC_GPIO144>;
+			output-low;
+		};
+
+		pins-bt-wake {
+			pinmux = <PINMUX_GPIO22__FUNC_GPIO22>;
+			bias-pull-up;
+		};
+
+		pins-ap-wake-bt {
+			pinmux = <PINMUX_GPIO168__FUNC_GPIO168>;
+			output-low;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO94__FUNC_URXD1>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO95__FUNC_UTXD1>;
+		};
+
+		pins-cts {
+			pinmux = <PINMUX_GPIO166__FUNC_UCTS1>;
+			input-enable;
+		};
+
+		pins-rts {
+			pinmux = <PINMUX_GPIO167__FUNC_URTS1>;
+		};
+	};
+
+	uart1_pins_sleep: uart1-sleep-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO94__FUNC_GPIO94>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO95__FUNC_UTXD1>;
+		};
+
+		pins-cts {
+			pinmux = <PINMUX_GPIO166__FUNC_UCTS1>;
+			input-enable;
+		};
+
+		pins-rts {
+			pinmux = <PINMUX_GPIO167__FUNC_URTS1>;
+		};
+	};
+};
+
+&rt5682 {
+	compatible = "realtek,rt5682i";
+	realtek,btndet-delay = <16>;
+	VBAT-supply = <&pp3300_ldo_z>;
+};
+
+&sound {
+	compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682";
+
+	speaker-codecs {
+		sound-dai = <&rt1015p>;
+	};
+
+	headset-codec {
+		sound-dai = <&rt5682 0>;
+	};
+};
+
 &touchscreen {
 	compatible = "hid-over-i2c";
 	post-power-on-delay-ms = <10>;
 	hid-descr-addr = <0x0001>;
 	vdd-supply = <&pp3300_u>;
 };
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-1 = <&uart1_pins_sleep>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>,
+			      <&pio 94 IRQ_TYPE_EDGE_FALLING>;
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins>;
+
+		enable-gpios = <&pio 144 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&pio 168 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&pio 22 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
index fa3d9573f37a..163960f58db5 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
@@ -8,6 +8,7 @@
 
 / {
 	model = "Google Spherion (rev0 - 3)";
+	chassis-type = "laptop";
 	compatible = "google,spherion-rev3", "google,spherion-rev2",
 		     "google,spherion-rev1", "google,spherion-rev0",
 		     "google,spherion", "mediatek,mt8192";
@@ -57,6 +58,42 @@
 	>;
 };
 
+&rt5682 {
+	compatible = "realtek,rt5682i";
+	realtek,btndet-delay = <16>;
+	VBAT-supply = <&pp3300_ldo_z>;
+};
+
+&sound {
+	compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682";
+
+	speaker-codecs {
+		sound-dai = <&rt1015p>;
+	};
+
+	headset-codec {
+		sound-dai = <&rt5682 0>;
+	};
+};
+
 &touchscreen {
 	compatible = "elan,ekth3500";
 };
+
+&i2c2 {
+	/* synaptics touchpad */
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+		status = "fail-needs-probe";
+	};
+};
+
+&trackpad {
+	status = "fail-needs-probe";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index 4b314435f8fd..0b4664f044a1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -11,6 +11,13 @@
 
 / {
 	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c7 = &i2c7;
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
 		serial0 = &uart0;
 	};
 
@@ -23,6 +30,59 @@
 		reg = <0 0x40000000 0 0x80000000>;
 	};
 
+	backlight_lcd0: backlight-lcd0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 500000>;
+		power-supply = <&ppvar_sys>;
+		enable-gpios = <&pio 152 0>;
+		brightness-levels = <0 1023>;
+		num-interpolated-steps = <1023>;
+		default-brightness-level = <576>;
+	};
+
+	dmic_codec: dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+	};
+
+	pp1000_dpbrdg: regulator-1v0-dpbrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1000_dpbrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1000_dpbrdg_en_pins>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 19 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6359_vs2_buck_reg>;
+	};
+
+	pp1000_mipibrdg: regulator-1v0-mipibrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1000_mipibrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1000_mipibrdg_en_pins>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 129 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6359_vs2_buck_reg>;
+	};
+
+	pp1800_dpbrdg: regulator-1v8-dpbrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_dpbrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_dpbrdg_en_pins>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 126 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6359_vio18_ldo_reg>;
+	};
+
 	/* system wide LDO 1.8V power rail */
 	pp1800_ldo_g: regulator-1v8-g {
 		compatible = "regulator-fixed";
@@ -34,6 +94,28 @@
 		vin-supply = <&pp3300_g>;
 	};
 
+	pp1800_mipibrdg: regulator-1v8-mipibrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_mipibrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_mipibrdg_en_pins>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 128 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6359_vio18_ldo_reg>;
+	};
+
+	pp3300_dpbrdg: regulator-3v3-dpbrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_dpbrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3300_dpbrdg_en_pins>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 26 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_g>;
+	};
+
 	/* system wide switching 3.3V power rail */
 	pp3300_g: regulator-3v3-g {
 		compatible = "regulator-fixed";
@@ -56,6 +138,18 @@
 		vin-supply = <&ppvar_sys>;
 	};
 
+	pp3300_mipibrdg: regulator-3v3-mipibrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_mipibrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3300_mipibrdg_en_pins>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 127 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_g>;
+		off-on-delay-us = <500000>;
+	};
+
 	/* separately switched 3.3V power rail */
 	pp3300_u: regulator-3v3-u {
 		compatible = "regulator-fixed";
@@ -105,6 +199,13 @@
 		#size-cells = <2>;
 		ranges;
 
+		afe_dma_mem: audio-dma-pool {
+			compatible = "shared-dma-pool";
+			size = <0 0x100000>;
+			alignment = <0 0x10>;
+			no-map;
+		};
+
 		scp_mem_reserved: scp@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
@@ -116,6 +217,91 @@
 			reg = <0 0xc0000000 0 0x4000000>;
 		};
 	};
+
+	rt1015p: audio-codec {
+		compatible = "realtek,rt1015p";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rt1015p_pins>;
+		sdb-gpios = <&pio 147 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+
+	sound: sound {
+		mediatek,platform = <&afe>;
+		pinctrl-names = "aud_clk_mosi_off",
+				"aud_clk_mosi_on",
+				"aud_dat_mosi_off",
+				"aud_dat_mosi_on",
+				"aud_dat_miso_off",
+				"aud_dat_miso_on",
+				"vow_dat_miso_off",
+				"vow_dat_miso_on",
+				"vow_clk_miso_off",
+				"vow_clk_miso_on",
+				"aud_nle_mosi_off",
+				"aud_nle_mosi_on",
+				"aud_dat_miso2_off",
+				"aud_dat_miso2_on",
+				"aud_gpio_i2s3_off",
+				"aud_gpio_i2s3_on",
+				"aud_gpio_i2s8_off",
+				"aud_gpio_i2s8_on",
+				"aud_gpio_i2s9_off",
+				"aud_gpio_i2s9_on",
+				"aud_dat_mosi_ch34_off",
+				"aud_dat_mosi_ch34_on",
+				"aud_dat_miso_ch34_off",
+				"aud_dat_miso_ch34_on",
+				"aud_gpio_tdm_off",
+				"aud_gpio_tdm_on";
+		pinctrl-0 = <&aud_clk_mosi_off_pins>;
+		pinctrl-1 = <&aud_clk_mosi_on_pins>;
+		pinctrl-2 = <&aud_dat_mosi_off_pins>;
+		pinctrl-3 = <&aud_dat_mosi_on_pins>;
+		pinctrl-4 = <&aud_dat_miso_off_pins>;
+		pinctrl-5 = <&aud_dat_miso_on_pins>;
+		pinctrl-6 = <&vow_dat_miso_off_pins>;
+		pinctrl-7 = <&vow_dat_miso_on_pins>;
+		pinctrl-8 = <&vow_clk_miso_off_pins>;
+		pinctrl-9 = <&vow_clk_miso_on_pins>;
+		pinctrl-10 = <&aud_nle_mosi_off_pins>;
+		pinctrl-11 = <&aud_nle_mosi_on_pins>;
+		pinctrl-12 = <&aud_dat_miso2_off_pins>;
+		pinctrl-13 = <&aud_dat_miso2_on_pins>;
+		pinctrl-14 = <&aud_gpio_i2s3_off_pins>;
+		pinctrl-15 = <&aud_gpio_i2s3_on_pins>;
+		pinctrl-16 = <&aud_gpio_i2s8_off_pins>;
+		pinctrl-17 = <&aud_gpio_i2s8_on_pins>;
+		pinctrl-18 = <&aud_gpio_i2s9_off_pins>;
+		pinctrl-19 = <&aud_gpio_i2s9_on_pins>;
+		pinctrl-20 = <&aud_dat_mosi_ch34_off_pins>;
+		pinctrl-21 = <&aud_dat_mosi_ch34_on_pins>;
+		pinctrl-22 = <&aud_dat_miso_ch34_off_pins>;
+		pinctrl-23 = <&aud_dat_miso_ch34_on_pins>;
+		pinctrl-24 = <&aud_gpio_tdm_off_pins>;
+		pinctrl-25 = <&aud_gpio_tdm_on_pins>;
+	};
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+};
+
+&dsi0 {
+	status = "okay";
+};
+
+&dsi_out {
+	remote-endpoint = <&anx7625_in>;
+};
+
+&gic {
+	mediatek,broken-save-restore-fw;
+};
+
+&gpu {
+	mali-supply = <&mt6315_7_vbuck1>;
+	status = "okay";
 };
 
 &i2c0 {
@@ -139,6 +325,19 @@
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
+
+	rt5682: audio-codec@1a {
+		/* Realtek RT5682i or RT5682s, sharing the same configuration */
+		reg = <0x1a>;
+		interrupts-extended = <&pio 18 IRQ_TYPE_LEVEL_LOW>;
+		realtek,jd-src = <1>;
+		#sound-dai-cells = <1>;
+
+		AVDD-supply = <&mt6359_vio18_ldo_reg>;
+		DBVDD-supply = <&mt6359_vio18_ldo_reg>;
+		LDO1-IN-supply = <&mt6359_vio18_ldo_reg>;
+		MICVDD-supply = <&pp3300_g>;
+	};
 };
 
 &i2c2 {
@@ -149,12 +348,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins>;
 
-	trackpad@15 {
+	trackpad: trackpad@15 {
 		compatible = "elan,ekth3000";
 		reg = <0x15>;
-		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&trackpad_pins>;
+		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
 		vcc-supply = <&pp3300_u>;
 		wakeup-source;
 	};
@@ -166,6 +365,53 @@
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c3_pins>;
+
+	anx_bridge: anx7625@58 {
+		compatible = "analogix,anx7625";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&anx7625_pins>;
+		enable-gpios = <&pio 41 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
+		vdd10-supply = <&pp1000_mipibrdg>;
+		vdd18-supply = <&pp1800_mipibrdg>;
+		vdd33-supply = <&pp3300_mipibrdg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				anx7625_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				anx7625_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "edp-panel";
+				power-supply = <&pp3300_mipibrdg>;
+				backlight = <&backlight_lcd0>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&anx7625_out>;
+					};
+				};
+			};
+		};
+	};
 };
 
 &i2c7 {
@@ -176,6 +422,18 @@
 	pinctrl-0 = <&i2c7_pins>;
 };
 
+&mfg0 {
+	domain-supply = <&mt6315_7_vbuck1>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
 &mmc0 {
 	status = "okay";
 
@@ -231,6 +489,13 @@
 	regulator-always-on;
 };
 
+&mt6359_vsram_others_ldo_reg {
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6315_7_vbuck1>;
+	regulator-coupled-max-spread = <10000>;
+};
+
 &mt6359_vufs_ldo_reg {
 	regulator-always-on;
 };
@@ -507,6 +772,179 @@
 			  "AUD_DAT_MISO0",
 			  "AUD_DAT_MISO1";
 
+	anx7625_pins: anx7625-default-pins {
+		pins-out {
+			pinmux = <PINMUX_GPIO41__FUNC_GPIO41>,
+				 <PINMUX_GPIO42__FUNC_GPIO42>;
+			output-low;
+		};
+
+		pins-in {
+			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	aud_clk_mosi_off_pins: aud-clk-mosi-off-pins {
+		pins-mosi-off {
+			pinmux = <PINMUX_GPIO214__FUNC_GPIO214>,
+				 <PINMUX_GPIO215__FUNC_GPIO215>;
+		};
+	};
+
+	aud_clk_mosi_on_pins: aud-clk-mosi-on-pins {
+		pins-mosi-on {
+			pinmux = <PINMUX_GPIO214__FUNC_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO215__FUNC_AUD_SYNC_MOSI>;
+			drive-strength = <10>;
+		};
+	};
+
+	aud_dat_miso_ch34_off_pins: aud-dat-miso-ch34-off-pins {
+		pins-miso-off {
+			pinmux = <PINMUX_GPIO199__FUNC_GPIO199>;
+		};
+	};
+
+	aud_dat_miso_ch34_on_pins: aud-dat-miso-ch34-on-pins {
+		pins-miso-on {
+			pinmux = <PINMUX_GPIO199__FUNC_AUD_DAT_MISO2>;
+		};
+	};
+
+	aud_dat_miso_off_pins: aud-dat-miso-off-pins {
+		pins-miso-off {
+			pinmux = <PINMUX_GPIO218__FUNC_GPIO218>,
+				 <PINMUX_GPIO219__FUNC_GPIO219>;
+		};
+	};
+
+	aud_dat_miso_on_pins: aud-dat-miso-on-pins {
+		pins-miso-on {
+			pinmux = <PINMUX_GPIO218__FUNC_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO219__FUNC_AUD_DAT_MISO1>;
+			drive-strength = <10>;
+		};
+	};
+
+	aud_dat_miso2_off_pins: aud-dat-miso2-off-pins {
+		pins-miso-off {
+			pinmux = <PINMUX_GPIO199__FUNC_GPIO199>;
+		};
+	};
+
+	aud_dat_miso2_on_pins: aud-dat-miso2-on-pins {
+		pins-miso-on {
+			pinmux = <PINMUX_GPIO199__FUNC_AUD_DAT_MISO2>;
+		};
+	};
+
+	aud_dat_mosi_ch34_off_pins: aud-dat-mosi-ch34-off-pins {
+		pins-mosi-off {
+			pinmux = <PINMUX_GPIO196__FUNC_GPIO196>;
+		};
+	};
+
+	aud_dat_mosi_ch34_on_pins: aud-dat-mosi-ch34-on-pins {
+		pins-mosi-on {
+			pinmux = <PINMUX_GPIO196__FUNC_AUD_DAT_MOSI2>;
+		};
+	};
+
+	aud_dat_mosi_off_pins: aud-dat-mosi-off-pins {
+		pins-mosi-off {
+			pinmux = <PINMUX_GPIO216__FUNC_GPIO216>,
+				 <PINMUX_GPIO217__FUNC_GPIO217>;
+		};
+	};
+
+	aud_dat_mosi_on_pins: aud-dat-mosi-on-pins {
+		pins-mosi-on {
+			pinmux = <PINMUX_GPIO216__FUNC_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO217__FUNC_AUD_DAT_MOSI1>;
+			drive-strength = <10>;
+		};
+	};
+
+	aud_gpio_i2s3_off_pins: aud-gpio-i2s3-off-pins {
+		pins-i2s3-off {
+			pinmux = <PINMUX_GPIO32__FUNC_GPIO32>,
+				 <PINMUX_GPIO33__FUNC_GPIO33>,
+				 <PINMUX_GPIO35__FUNC_GPIO35>;
+		};
+	};
+
+	aud_gpio_i2s3_on_pins: aud-gpio-i2s3-on-pins {
+		pins-i2s3-on {
+			pinmux = <PINMUX_GPIO32__FUNC_I2S3_BCK>,
+				 <PINMUX_GPIO33__FUNC_I2S3_LRCK>,
+				 <PINMUX_GPIO35__FUNC_I2S3_DO>;
+		};
+	};
+
+	aud_gpio_i2s8_off_pins: aud-gpio-i2s8-off-pins {
+		pins-i2s8-off {
+			pinmux = <PINMUX_GPIO10__FUNC_GPIO10>,
+				 <PINMUX_GPIO11__FUNC_GPIO11>,
+				 <PINMUX_GPIO12__FUNC_GPIO12>,
+				 <PINMUX_GPIO13__FUNC_GPIO13>;
+		};
+	};
+
+	aud_gpio_i2s8_on_pins: aud-gpio-i2s8-on-pins {
+		pins-i2s8-on {
+			pinmux = <PINMUX_GPIO10__FUNC_I2S8_MCK>,
+				 <PINMUX_GPIO11__FUNC_I2S8_BCK>,
+				 <PINMUX_GPIO12__FUNC_I2S8_LRCK>,
+				 <PINMUX_GPIO13__FUNC_I2S8_DI>;
+		};
+	};
+
+	aud_gpio_i2s9_off_pins: aud-gpio-i2s9-off-pins {
+		pins-i2s9-off {
+			pinmux = <PINMUX_GPIO29__FUNC_GPIO29>;
+		};
+	};
+
+	aud_gpio_i2s9_on_pins: aud-gpio-i2s9-on-pins {
+		pins-i2s9-on {
+			pinmux = <PINMUX_GPIO29__FUNC_I2S9_DO>;
+		};
+	};
+
+	aud_gpio_tdm_off_pins: aud-gpio-tdm-off-pins {
+		pins-tdm-off {
+			pinmux = <PINMUX_GPIO0__FUNC_GPIO0>,
+				 <PINMUX_GPIO1__FUNC_GPIO1>,
+				 <PINMUX_GPIO2__FUNC_GPIO2>,
+				 <PINMUX_GPIO3__FUNC_GPIO3>;
+		};
+	};
+
+	aud_gpio_tdm_on_pins: aud-gpio-tdm-on-pins {
+		pins-tdm-on {
+			pinmux = <PINMUX_GPIO0__FUNC_TDM_LRCK>,
+				 <PINMUX_GPIO1__FUNC_TDM_BCK>,
+				 <PINMUX_GPIO2__FUNC_TDM_MCK>,
+				 <PINMUX_GPIO3__FUNC_TDM_DATA0>;
+		};
+	};
+
+	aud_nle_mosi_off_pins: aud-nle-mosi-off-pins {
+		pins-nle-mosi-off {
+			pinmux = <PINMUX_GPIO197__FUNC_GPIO197>,
+				 <PINMUX_GPIO198__FUNC_GPIO198>;
+		};
+	};
+
+	aud_nle_mosi_on_pins: aud-nle-mosi-on-pins {
+		pins-nle-mosi-on {
+			pinmux = <PINMUX_GPIO197__FUNC_AUD_NLE_MOSI1>,
+				 <PINMUX_GPIO198__FUNC_AUD_NLE_MOSI0>;
+		};
+	};
+
 	cr50_int: cr50-irq-default-pins {
 		pins-gsc-ap-int-odl {
 			pinmux = <PINMUX_GPIO171__FUNC_GPIO171>;
@@ -719,6 +1157,48 @@
 		};
 	};
 
+	pp1000_dpbrdg_en_pins: pp1000-dpbrdg-en-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO19__FUNC_GPIO19>;
+			output-low;
+		};
+	};
+
+	pp1000_mipibrdg_en_pins: pp1000-mipibrdg-en-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
+			output-low;
+		};
+	};
+
+	pp1800_dpbrdg_en_pins: pp1800-dpbrdg-en-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO126__FUNC_GPIO126>;
+			output-low;
+		};
+	};
+
+	pp1800_mipibrdg_en_pins: pp1800-mipibrd-en-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO128__FUNC_GPIO128>;
+			output-low;
+		};
+	};
+
+	pp3300_dpbrdg_en_pins: pp3300-dpbrdg-en-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO26__FUNC_GPIO26>;
+			output-low;
+		};
+	};
+
+	pp3300_mipibrdg_en_pins: pp3300-mipibrdg-en-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO127__FUNC_GPIO127>;
+			output-low;
+		};
+	};
+
 	pp3300_wlan_pins: pp3300-wlan-pins {
 		pins-pcie-en-pp3300-wlan {
 			pinmux = <PINMUX_GPIO143__FUNC_GPIO143>;
@@ -726,6 +1206,24 @@
 		};
 	};
 
+	pwm0_pins: pwm0-default-pins {
+		pins-pwm {
+			pinmux = <PINMUX_GPIO40__FUNC_DISP_PWM>;
+		};
+
+		pins-inhibit {
+			pinmux = <PINMUX_GPIO152__FUNC_GPIO152>;
+			output-high;
+		};
+	};
+
+	rt1015p_pins: rt1015p-default-pins {
+		pins {
+			pinmux = <PINMUX_GPIO147__FUNC_GPIO147>;
+			output-low;
+		};
+	};
+
 	scp_pins: scp-pins {
 		pins-vreq-vao {
 			pinmux = <PINMUX_GPIO195__FUNC_SCP_VREQ_VAO>;
@@ -781,12 +1279,43 @@
 			output-low;
 		};
 	};
+
+	vow_clk_miso_off_pins: vow-clk-miso-off-pins {
+		pins-miso-off {
+			pinmux = <PINMUX_GPIO219__FUNC_GPIO219>;
+		};
+	};
+
+	vow_clk_miso_on_pins: vow-clk-miso-on-pins {
+		pins-miso-on {
+			pinmux = <PINMUX_GPIO219__FUNC_VOW_CLK_MISO>;
+		};
+	};
+
+	vow_dat_miso_off_pins: vow-dat-miso-off-pins {
+		pins-miso-off {
+			pinmux = <PINMUX_GPIO218__FUNC_GPIO218>;
+		};
+	};
+
+	vow_dat_miso_on_pins: vow-dat-miso-on-pins {
+		pins-miso-on {
+			pinmux = <PINMUX_GPIO218__FUNC_VOW_DAT_MISO>;
+		};
+	};
 };
 
 &pmic {
 	interrupts-extended = <&pio 214 IRQ_TYPE_LEVEL_HIGH>;
 };
 
+&pwm0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins>;
+};
+
 &scp {
 	status = "okay";
 
@@ -795,7 +1324,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&scp_pins>;
 
-	cros-ec {
+	cros-ec-rpmsg {
 		compatible = "google,cros-ec-rpmsg";
 		mediatek,rpmsg-name = "cros-ec-rpmsg";
 	};
@@ -815,14 +1344,11 @@
 		spi-max-frequency = <3000000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cros_ec_int>;
+		wakeup-source;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		base_detection: cbas {
-			compatible = "google,cros-cbas";
-		};
-
 		cros_ec_pwm: pwm {
 			compatible = "google,cros-ec-pwm";
 			#pwm-cells = <1>;
@@ -885,7 +1411,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi5_pins>;
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		interrupts-extended = <&pio 171 IRQ_TYPE_EDGE_RISING>;
@@ -905,9 +1431,8 @@
 
 		regulators {
 			mt6315_6_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
-				regulator-min-microvolt = <300000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
@@ -915,9 +1440,8 @@
 			};
 
 			mt6315_6_vbuck3: vbuck3 {
-				regulator-compatible = "vbuck3";
 				regulator-name = "Vlcpu";
-				regulator-min-microvolt = <300000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
@@ -932,12 +1456,13 @@
 
 		regulators {
 			mt6315_7_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
-				regulator-min-microvolt = <606250>;
-				regulator-max-microvolt = <1193750>;
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <800000>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
+				regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
+				regulator-coupled-max-spread = <10000>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index cbae5a5ee4a0..47dea10dd3b8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -6,12 +6,16 @@
 
 /dts-v1/;
 #include <dt-bindings/clock/mt8192-clk.h>
+#include <dt-bindings/gce/mt8192-gce.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/memory/mt8192-larb-port.h>
 #include <dt-bindings/pinctrl/mt8192-pinfunc.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/power/mt8192-power.h>
+#include <dt-bindings/reset/mt8192-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
 
 / {
 	compatible = "mediatek,mt8192";
@@ -19,6 +23,23 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		ovl0 = &ovl0;
+		ovl-2l0 = &ovl_2l0;
+		ovl-2l2 = &ovl_2l2;
+		rdma0 = &rdma0;
+		rdma4 = &rdma4;
+	};
+
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
+	};
+
 	clk26m: oscillator0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -43,9 +64,17 @@
 			reg = <0x000>;
 			enable-method = "psci";
 			clock-frequency = <1701000000>;
-			cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
-			capacity-dmips-mhz = <530>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@100 {
@@ -54,9 +83,17 @@
 			reg = <0x100>;
 			enable-method = "psci";
 			clock-frequency = <1701000000>;
-			cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
-			capacity-dmips-mhz = <530>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@200 {
@@ -65,9 +102,17 @@
 			reg = <0x200>;
 			enable-method = "psci";
 			clock-frequency = <1701000000>;
-			cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
-			capacity-dmips-mhz = <530>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@300 {
@@ -76,9 +121,17 @@
 			reg = <0x300>;
 			enable-method = "psci";
 			clock-frequency = <1701000000>;
-			cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
-			capacity-dmips-mhz = <530>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu4: cpu@400 {
@@ -87,9 +140,17 @@
 			reg = <0x400>;
 			enable-method = "psci";
 			clock-frequency = <2171000000>;
-			cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
 			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu5: cpu@500 {
@@ -98,9 +159,17 @@
 			reg = <0x500>;
 			enable-method = "psci";
 			clock-frequency = <2171000000>;
-			cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
 			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu6: cpu@600 {
@@ -109,9 +178,17 @@
 			reg = <0x600>;
 			enable-method = "psci";
 			clock-frequency = <2171000000>;
-			cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
 			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu7: cpu@700 {
@@ -120,9 +197,17 @@
 			reg = <0x700>;
 			enable-method = "psci";
 			clock-frequency = <2171000000>;
-			cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
 			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu-map {
@@ -139,19 +224,16 @@
 				core3 {
 					cpu = <&cpu3>;
 				};
-			};
-
-			cluster1 {
-				core0 {
+				core4 {
 					cpu = <&cpu4>;
 				};
-				core1 {
+				core5 {
 					cpu = <&cpu5>;
 				};
-				core2 {
+				core6 {
 					cpu = <&cpu6>;
 				};
-				core3 {
+				core7 {
 					cpu = <&cpu7>;
 				};
 			};
@@ -159,21 +241,36 @@
 
 		l2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
 			next-level-cache = <&l3_0>;
+			cache-unified;
 		};
 
 		l2_1: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
 			next-level-cache = <&l3_0>;
+			cache-unified;
 		};
 
 		l3_0: l3-cache {
 			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-unified;
 		};
 
 		idle-states {
 			entry-method = "psci";
-			cpu_sleep_l: cpu-sleep-l {
+			cpu_ret_l: cpu-retention-l {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x00010001>;
 				local-timer-stop;
@@ -181,7 +278,7 @@
 				exit-latency-us = <140>;
 				min-residency-us = <780>;
 			};
-			cpu_sleep_b: cpu-sleep-b {
+			cpu_ret_b: cpu-retention-b {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x00010001>;
 				local-timer-stop;
@@ -189,7 +286,7 @@
 				exit-latency-us = <145>;
 				min-residency-us = <720>;
 			};
-			cluster_sleep_l: cluster-sleep-l {
+			cpu_off_l: cpu-off-l {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x01010002>;
 				local-timer-stop;
@@ -197,7 +294,7 @@
 				exit-latency-us = <155>;
 				min-residency-us = <860>;
 			};
-			cluster_sleep_b: cluster-sleep-b {
+			cpu_off_b: cpu-off-b {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x01010002>;
 				local-timer-stop;
@@ -235,12 +332,104 @@
 		clock-frequency = <13000000>;
 	};
 
+	gpu_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-358000000 {
+			opp-hz = /bits/ 64 <358000000>;
+			opp-microvolt = <606250>;
+		};
+
+		opp-399000000 {
+			opp-hz = /bits/ 64 <399000000>;
+			opp-microvolt = <618750>;
+		};
+
+		opp-440000000 {
+			opp-hz = /bits/ 64 <440000000>;
+			opp-microvolt = <631250>;
+		};
+
+		opp-482000000 {
+			opp-hz = /bits/ 64 <482000000>;
+			opp-microvolt = <643750>;
+		};
+
+		opp-523000000 {
+			opp-hz = /bits/ 64 <523000000>;
+			opp-microvolt = <656250>;
+		};
+
+		opp-564000000 {
+			opp-hz = /bits/ 64 <564000000>;
+			opp-microvolt = <668750>;
+		};
+
+		opp-605000000 {
+			opp-hz = /bits/ 64 <605000000>;
+			opp-microvolt = <681250>;
+		};
+
+		opp-647000000 {
+			opp-hz = /bits/ 64 <647000000>;
+			opp-microvolt = <693750>;
+		};
+
+		opp-688000000 {
+			opp-hz = /bits/ 64 <688000000>;
+			opp-microvolt = <706250>;
+		};
+
+		opp-724000000 {
+			opp-hz = /bits/ 64 <724000000>;
+			opp-microvolt = <725000>;
+		};
+
+		opp-748000000 {
+			opp-hz = /bits/ 64 <748000000>;
+			opp-microvolt = <737500>;
+		};
+
+		opp-772000000 {
+			opp-hz = /bits/ 64 <772000000>;
+			opp-microvolt = <750000>;
+		};
+
+		opp-795000000 {
+			opp-hz = /bits/ 64 <795000000>;
+			opp-microvolt = <762500>;
+		};
+
+		opp-819000000 {
+			opp-hz = /bits/ 64 <819000000>;
+			opp-microvolt = <775000>;
+		};
+
+		opp-843000000 {
+			opp-hz = /bits/ 64 <843000000>;
+			opp-microvolt = <787500>;
+		};
+
+		opp-866000000 {
+			opp-hz = /bits/ 64 <866000000>;
+			opp-microvolt = <800000>;
+		};
+	};
+
 	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		compatible = "simple-bus";
+		dma-ranges = <0x0 0x0 0x0 0x0 0x4 0x0>;
 		ranges;
 
+		performance: performance-controller@11bc10 {
+			compatible = "mediatek,cpufreq-hw";
+			reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+			#performance-domain-cells = <1>;
+		};
+
 		gic: interrupt-controller@c000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <4>;
@@ -306,9 +495,8 @@
 		};
 
 		scpsys: syscon@10006000 {
-			compatible = "syscon", "simple-mfd";
+			compatible = "mediatek,mt8192-scpsys", "syscon", "simple-mfd";
 			reg = <0 0x10006000 0 0x1000>;
-			#power-domain-cells = <1>;
 
 			/* System Power Manager */
 			spm: power-controller {
@@ -336,15 +524,16 @@
 					#power-domain-cells = <0>;
 				};
 
-				power-domain@MT8192_POWER_DOMAIN_MFG0 {
+				mfg0: power-domain@MT8192_POWER_DOMAIN_MFG0 {
 					reg = <MT8192_POWER_DOMAIN_MFG0>;
-					clocks = <&topckgen CLK_TOP_MFG_PLL_SEL>;
-					clock-names = "mfg";
+					clocks = <&topckgen CLK_TOP_MFG_PLL_SEL>,
+						 <&topckgen CLK_TOP_MFG_REF_SEL>;
+					clock-names = "mfg", "alt";
 					#address-cells = <1>;
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
 
-					power-domain@MT8192_POWER_DOMAIN_MFG1 {
+					mfg1: power-domain@MT8192_POWER_DOMAIN_MFG1 {
 						reg = <MT8192_POWER_DOMAIN_MFG1>;
 						mediatek,infracfg = <&infracfg>;
 						#address-cells = <1>;
@@ -522,8 +711,7 @@
 				     "mediatek,mt6765-timer";
 			reg = <0 0x10017000 0 0x1000>;
 			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&topckgen CLK_TOP_CSW_F26M_D2>;
-			clock-names = "clk13m";
+			clocks = <&clk13m>;
 		};
 
 		pwrap: pwrap@10026000 {
@@ -553,10 +741,21 @@
 			assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>;
 		};
 
+		gce: mailbox@10228000 {
+			compatible = "mediatek,mt8192-gce";
+			reg = <0 0x10228000 0 0x4000>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+			clocks = <&infracfg CLK_INFRA_GCE>;
+			clock-names = "gce";
+		};
+
 		scp_adsp: clock-controller@10720000 {
 			compatible = "mediatek,mt8192-scp_adsp";
 			reg = <0 0x10720000 0 0x1000>;
 			#clock-cells = <1>;
+			/* power domain dependency not upstreamed */
+			status = "fail";
 		};
 
 		uart0: serial@11002000 {
@@ -599,6 +798,40 @@
 			status = "disabled";
 		};
 
+		lvts_ap: thermal-sensor@1100b000 {
+			compatible = "mediatek,mt8192-lvts-ap";
+			reg = <0 0x1100b000 0 0xc00>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			resets = <&infracfg MT8192_INFRA_RST0_THERM_CTRL_SWRST>;
+			nvmem-cells = <&lvts_e_data1>;
+			nvmem-cell-names = "lvts-calib-data-1";
+			#thermal-sensor-cells = <1>;
+		};
+
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8192-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>, <&lvts_e_data1>;
+			nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+			resets = <&infracfg MT8192_INFRA_RST3_THERM_CTRL_PTP_SWRST>;
+			reset-names = "svs_rst";
+		};
+
+		pwm0: pwm@1100e000 {
+			compatible = "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100e000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM_SEL>,
+				 <&infracfg CLK_INFRA_DISP_PWM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
 		spi1: spi@11010000 {
 			compatible = "mediatek,mt8192-spi",
 				     "mediatek,mt6765-spi";
@@ -724,9 +957,12 @@
 			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
 						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
 			clocks = <&infracfg CLK_INFRA_SSUSB>,
-				 <&infracfg CLK_INFRA_SSUSB_XHCI>,
-				 <&apmixedsys CLK_APMIXED_USBPLL>;
-			clock-names = "sys_ck", "xhci_ck", "ref_ck";
+				 <&apmixedsys CLK_APMIXED_USBPLL>,
+				 <&clk26m>,
+				 <&clk26m>,
+				 <&infracfg CLK_INFRA_SSUSB_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
+				      "xhci_ck";
 			wakeup-source;
 			mediatek,syscon-wakeup = <&pericfg 0x420 102>;
 			status = "disabled";
@@ -911,12 +1147,31 @@
 			status = "disabled";
 		};
 
+		lvts_mcu: thermal-sensor@11278000 {
+			compatible = "mediatek,mt8192-lvts-mcu";
+			reg = <0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			resets = <&infracfg MT8192_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+			nvmem-cells = <&lvts_e_data1>;
+			nvmem-cell-names = "lvts-calib-data-1";
+			#thermal-sensor-cells = <1>;
+		};
+
 		efuse: efuse@11c10000 {
 			compatible = "mediatek,mt8192-efuse", "mediatek,efuse";
 			reg = <0 0x11c10000 0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
+			socinfo-data1@44 {
+				reg = <0x044 0x4>;
+			};
+
+			socinfo-data2@50 {
+				reg = <0x050 0x4>;
+			};
+
 			lvts_e_data1: data1@1c0 {
 				reg = <0x1c0 0x58>;
 			};
@@ -1084,6 +1339,16 @@
 			};
 		};
 
+		mipi_tx0: dsi-phy@11e50000 {
+			compatible = "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11e50000 0 0x1000>;
+			clocks = <&apmixedsys CLK_APMIXED_MIPID26M>;
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			clock-output-names = "mipi_tx0_pll";
+			status = "disabled";
+		};
+
 		i2c0: i2c@11f00000 {
 			compatible = "mediatek,mt8192-i2c";
 			reg = <0 0x11f00000 0 0x1000>,
@@ -1156,6 +1421,28 @@
 			status = "disabled";
 		};
 
+		gpu: gpu@13000000 {
+			compatible = "mediatek,mt8192-mali", "arm,mali-valhall-jm";
+			reg = <0 0x13000000 0 0x4000>;
+			interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "job", "mmu", "gpu";
+
+			clocks = <&apmixedsys CLK_APMIXED_MFGPLL>;
+
+			power-domains = <&spm MT8192_POWER_DOMAIN_MFG2>,
+					<&spm MT8192_POWER_DOMAIN_MFG3>,
+					<&spm MT8192_POWER_DOMAIN_MFG4>,
+					<&spm MT8192_POWER_DOMAIN_MFG5>,
+					<&spm MT8192_POWER_DOMAIN_MFG6>;
+			power-domain-names = "core0", "core1", "core2", "core3", "core4";
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			status = "disabled";
+		};
+
 		mfgcfg: clock-controller@13fbf000 {
 			compatible = "mediatek,mt8192-mfgcfg";
 			reg = <0 0x13fbf000 0 0x1000>;
@@ -1166,6 +1453,21 @@
 			compatible = "mediatek,mt8192-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
+			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+		};
+
+		mutex: mutex@14001000 {
+			compatible = "mediatek,mt8192-disp-mutex";
+			reg = <0 0x14001000 0 0x1000>;
+			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&mmsys CLK_MM_DISP_MUTEX0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>,
+					      <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
 		};
 
 		smi_common: smi@14002000 {
@@ -1199,6 +1501,140 @@
 			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
 		};
 
+		ovl0: ovl@14005000 {
+			compatible = "mediatek,mt8192-disp-ovl";
+			reg = <0 0x14005000 0 0x1000>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0>;
+			iommus = <&iommu0 M4U_PORT_L0_OVL_RDMA0>,
+				 <&iommu0 M4U_PORT_L0_OVL_RDMA0_HDR>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+		};
+
+		ovl_2l0: ovl@14006000 {
+			compatible = "mediatek,mt8192-disp-ovl-2l";
+			reg = <0 0x14006000 0 0x1000>;
+			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+			iommus = <&iommu0 M4U_PORT_L1_OVL_2L_RDMA0>,
+				 <&iommu0 M4U_PORT_L1_OVL_2L_RDMA0_HDR>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+		};
+
+		rdma0: rdma@14007000 {
+			compatible = "mediatek,mt8192-disp-rdma",
+				     "mediatek,mt8183-disp-rdma";
+			reg = <0 0x14007000 0 0x1000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+			iommus = <&iommu0 M4U_PORT_L0_DISP_RDMA0>;
+			mediatek,rdma-fifo-size = <5120>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x7000 0x1000>;
+		};
+
+		color0: color@14009000 {
+			compatible = "mediatek,mt8192-disp-color",
+				     "mediatek,mt8173-disp-color";
+			reg = <0 0x14009000 0 0x1000>;
+			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+		};
+
+		ccorr0: ccorr@1400a000 {
+			compatible = "mediatek,mt8192-disp-ccorr";
+			reg = <0 0x1400a000 0 0x1000>;
+			interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
+		};
+
+		aal0: aal@1400b000 {
+			compatible = "mediatek,mt8192-disp-aal",
+				     "mediatek,mt8183-disp-aal";
+			reg = <0 0x1400b000 0 0x1000>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_AAL0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
+		};
+
+		gamma0: gamma@1400c000 {
+			compatible = "mediatek,mt8192-disp-gamma",
+				     "mediatek,mt8183-disp-gamma";
+			reg = <0 0x1400c000 0 0x1000>;
+			interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+		};
+
+		postmask0: postmask@1400d000 {
+			compatible = "mediatek,mt8192-disp-postmask";
+			reg = <0 0x1400d000 0 0x1000>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_POSTMASK0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+		};
+
+		dither0: dither@1400e000 {
+			compatible = "mediatek,mt8192-disp-dither",
+				     "mediatek,mt8183-disp-dither";
+			reg = <0 0x1400e000 0 0x1000>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+		};
+
+		dsi0: dsi@14010000 {
+			compatible = "mediatek,mt8183-dsi";
+			reg = <0 0x14010000 0 0x1000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&mmsys CLK_MM_DSI0>,
+				 <&mmsys CLK_MM_DSI_DSI0>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			resets = <&mmsys MT8192_MMSYS_SW0_RST_B_DISP_DSI0>;
+			status = "disabled";
+
+			port {
+				dsi_out: endpoint { };
+			};
+		};
+
+		ovl_2l2: ovl@14014000 {
+			compatible = "mediatek,mt8192-disp-ovl-2l";
+			reg = <0 0x14014000 0 0x1000>;
+			interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_OVL2_2L>;
+			iommus = <&iommu0 M4U_PORT_L1_OVL_2L_RDMA2>,
+				 <&iommu0 M4U_PORT_L1_OVL_2L_RDMA2_HDR>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x4000 0x1000>;
+		};
+
+		rdma4: rdma@14015000 {
+			compatible = "mediatek,mt8192-disp-rdma",
+				     "mediatek,mt8183-disp-rdma";
+			reg = <0 0x14015000 0 0x1000>;
+			interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA4>;
+			iommus = <&iommu0 M4U_PORT_L1_DISP_RDMA4>;
+			mediatek,rdma-fifo-size = <2048>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+		};
+
 		dpi0: dpi@14016000 {
 			compatible = "mediatek,mt8192-dpi";
 			reg = <0 0x14016000 0 0x1000>;
@@ -1259,6 +1695,65 @@
 			power-domains = <&spm MT8192_POWER_DOMAIN_ISP2>;
 		};
 
+		vcodec_dec: video-codec@16000000 {
+			compatible = "mediatek,mt8192-vcodec-dec";
+			reg = <0 0x16000000 0 0x1000>;
+			mediatek,scp = <&scp>;
+			iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0 0 0 0x16000000 0 0x26000>;
+
+			video-codec@10000 {
+				compatible = "mediatek,mtk-vcodec-lat";
+				reg = <0x0 0x10000 0 0x800>;
+				interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>;
+				clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+					 <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+					 <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+					 <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
+					 <&topckgen CLK_TOP_MAINPLL_D4>;
+				clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
+				assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+				assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+				power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>;
+			};
+
+			video-codec@25000 {
+				compatible = "mediatek,mtk-vcodec-core";
+				reg = <0 0x25000 0 0x1000>;
+				interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>;
+				clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+					 <&vdecsys CLK_VDEC_VDEC>,
+					 <&vdecsys CLK_VDEC_LAT>,
+					 <&vdecsys CLK_VDEC_LARB1>,
+					 <&topckgen CLK_TOP_MAINPLL_D4>;
+				clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
+				assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+				assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+				power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>;
+			};
+		};
+
 		larb5: larb@1600d000 {
 			compatible = "mediatek,mt8192-smi-larb";
 			reg = <0 0x1600d000 0 0x1000>;
@@ -1328,7 +1823,7 @@
 			mediatek,scp = <&scp>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_VENC>;
 			clocks = <&vencsys CLK_VENC_SET1_VENC>;
-			clock-names = "venc-set1";
+			clock-names = "venc_sel";
 			assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
 			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
 		};
@@ -1457,4 +1952,426 @@
 			power-domains = <&spm MT8192_POWER_DOMAIN_MDP>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU0>;
+
+			trips {
+				cpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU1>;
+
+			trips {
+				cpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU2>;
+
+			trips {
+				cpu2_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU3>;
+
+			trips {
+				cpu3_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU0>;
+
+			trips {
+				cpu4_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU1>;
+
+			trips {
+				cpu5_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU2>;
+
+			trips {
+				cpu6_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU3>;
+
+			trips {
+				cpu7_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		vpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_VPU0>;
+
+			trips {
+				vpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		vpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_VPU1>;
+
+			trips {
+				vpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_GPU0>;
+
+			trips {
+				gpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_GPU1>;
+
+			trips {
+				gpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		infra-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_INFRA>;
+
+			trips {
+				infra_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				infra_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_CAM>;
+
+			trips {
+				cam_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD0>;
+
+			trips {
+				md0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD1>;
+
+			trips {
+				md1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD2>;
+
+			trips {
+				md2_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts
new file mode 100644
index 000000000000..49664de99b88
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8195-cherry.dtsi"
+
+/ {
+	model = "HP Dojo (sku 1, 3, 5, 7) board";
+	chassis-type = "convertible";
+	compatible = "google,dojo-sku7", "google,dojo-sku5",
+		     "google,dojo-sku3", "google,dojo-sku1",
+		     "google,dojo", "mediatek,mt8195";
+};
+
+&audio_codec {
+	compatible = "realtek,rt5682s";
+	realtek,amic-delay-ms = <250>;
+};
+
+&i2c2 {
+	spk_r_amp: amplifier@38 {
+		compatible = "maxim,max98390";
+		reg = <0x38>;
+		reset-gpios = <&pio 100 GPIO_ACTIVE_LOW>;
+		sound-name-prefix = "Right";
+		#sound-dai-cells = <0>;
+	};
+
+	spk_l_amp: amplifier@39 {
+		compatible = "maxim,max98390";
+		reg = <0x39>;
+		sound-name-prefix = "Left";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c4 {
+	touchscreen@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		hid-descr-addr = <0x0001>;
+		interrupts-extended = <&pio 92 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		post-power-on-delay-ms = <10>;
+		vdd-supply = <&pp3300_s3>;
+	};
+};
+
+&keyboard_controller {
+	linux,keymap = <
+		CROS_STD_MAIN_KEYMAP
+
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_KBDILLUMTOGGLE)
+		MATRIX_KEY(0x01, 0x09, KEY_PLAYPAUSE)
+		MATRIX_KEY(0x00, 0x04, KEY_MICMUTE)
+		MATRIX_KEY(0x00, 0x01, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x05, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x03, 0x05, KEY_VOLUMEUP)
+	>;
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_pins_default>;
+	status = "okay";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pio_default {
+	pins-low-power-hdmi-disable {
+		pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
+			 <PINMUX_GPIO32__FUNC_GPIO32>,
+			 <PINMUX_GPIO33__FUNC_GPIO33>;
+		input-enable;
+		bias-pull-down;
+	};
+
+	pins-low-power-hdmi-rsel-disable {
+		pinmux = <PINMUX_GPIO34__FUNC_GPIO34>,
+			 <PINMUX_GPIO35__FUNC_GPIO35>;
+		input-enable;
+		bias-pull-down = <75000>;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8195_mt6359_max98390_rt5682";
+	model = "m8195_m98390_5682s";
+
+	audio-routing =
+		"Headphone", "HPOL",
+		"Headphone", "HPOR",
+		"IN1P", "Headset Mic",
+		"Right Spk", "Right BE_OUT",
+		"Left Spk", "Left BE_OUT";
+
+	spk-playback-dai-link {
+		codec {
+			sound-dai = <&spk_r_amp>, <&spk_l_amp>;
+		};
+	};
+};
+
+&spk_amplifier {
+	/* Disable RT1019P, not present on Dojo */
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
index 3348ba69ff6c..a50b4e8efaba 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
@@ -10,6 +10,21 @@
 	compatible = "google,tomato-rev1", "google,tomato", "mediatek,mt8195";
 };
 
+&audio_codec {
+	compatible = "realtek,rt5682i";
+	realtek,btndet-delay = <16>;
+	VBAT-supply = <&pp3300_z5>;
+};
+
+&sound {
+	compatible = "mediatek,mt8195_mt6359_rt1019_rt5682";
+	model = "mt8195_r1019_5682";
+};
+
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
index 4669e9d917f8..a8657c0068d5 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
@@ -10,17 +10,28 @@
 	compatible = "google,tomato-rev2", "google,tomato", "mediatek,mt8195";
 };
 
+&audio_codec {
+	compatible = "realtek,rt5682i";
+	realtek,btndet-delay = <16>;
+	VBAT-supply = <&pp3300_z5>;
+};
+
 &pio_default {
 	pins-low-power-hdmi-disable {
 		pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
 			 <PINMUX_GPIO32__FUNC_GPIO32>,
-			 <PINMUX_GPIO33__FUNC_GPIO33>,
-			 <PINMUX_GPIO34__FUNC_GPIO34>,
-			 <PINMUX_GPIO35__FUNC_GPIO35>;
+			 <PINMUX_GPIO33__FUNC_GPIO33>;
 		input-enable;
 		bias-pull-down;
 	};
 
+	pins-low-power-hdmi-rsel-disable {
+		pinmux = <PINMUX_GPIO34__FUNC_GPIO34>,
+			 <PINMUX_GPIO35__FUNC_GPIO35>;
+		input-enable;
+		bias-pull-down = <75000>;
+	};
+
 	pins-low-power-pcie0-disable {
 		pinmux = <PINMUX_GPIO19__FUNC_GPIO19>,
 			 <PINMUX_GPIO20__FUNC_GPIO20>,
@@ -30,6 +41,15 @@
 	};
 };
 
+&sound {
+	compatible = "mediatek,mt8195_mt6359_rt1019_rt5682";
+	model = "mt8195_r1019_5682";
+};
+
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
index 5021edd02f7c..9049d362a5e0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
@@ -11,17 +11,27 @@
 		     "google,tomato", "mediatek,mt8195";
 };
 
+&audio_codec {
+	compatible = "realtek,rt5682s";
+	realtek,amic-delay-ms = <250>;
+};
+
 &pio_default {
 	pins-low-power-hdmi-disable {
 		pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
 			 <PINMUX_GPIO32__FUNC_GPIO32>,
-			 <PINMUX_GPIO33__FUNC_GPIO33>,
-			 <PINMUX_GPIO34__FUNC_GPIO34>,
-			 <PINMUX_GPIO35__FUNC_GPIO35>;
+			 <PINMUX_GPIO33__FUNC_GPIO33>;
 		input-enable;
 		bias-pull-down;
 	};
 
+	pins-low-power-hdmi-rsel-disable {
+		pinmux = <PINMUX_GPIO34__FUNC_GPIO34>,
+			 <PINMUX_GPIO35__FUNC_GPIO35>;
+		input-enable;
+		bias-pull-down = <75000>;
+	};
+
 	pins-low-power-pcie0-disable {
 		pinmux = <PINMUX_GPIO19__FUNC_GPIO19>,
 			 <PINMUX_GPIO20__FUNC_GPIO20>,
@@ -31,6 +41,15 @@
 	};
 };
 
+&sound {
+	compatible = "mediatek,mt8195_mt6359_rt1019_rt5682";
+	model = "m8195_r1019_5682s";
+};
+
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index fcc600674339..b3761b80cac7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/spmi/spmi.h>
 #include "mt8195.dtsi"
 #include "mt6359.dtsi"
 
@@ -17,18 +18,48 @@
 		i2c5 = &i2c5;
 		i2c7 = &i2c7;
 		mmc0 = &mmc0;
+		mmc1 = &mmc1;
 		serial0 = &uart0;
 	};
 
+	backlight_lcd0: backlight-lcd0 {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <576>;
+		enable-gpios = <&pio 82 GPIO_ACTIVE_HIGH>;
+		num-interpolated-steps = <1023>;
+		pwms = <&disp_pwm0 0 500000>;
+		power-supply = <&ppvar_sys>;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+	};
+
 	memory@40000000 {
 		device_type = "memory";
 		reg = <0 0x40000000 0 0x80000000>;
 	};
 
+	pp3300_disp_x: regulator-pp3300-disp-x {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_disp_x";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <2500>;
+		enable-active-high;
+		gpio = <&pio 55 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_fixed_pins>;
+		vin-supply = <&pp3300_z2>;
+	};
+
 	/* system wide LDO 3.3V power rail */
 	pp3300_z5: regulator-pp3300-ldo-z5 {
 		compatible = "regulator-fixed";
@@ -96,6 +127,77 @@
 		regulator-boot-on;
 	};
 
+	/* Murata NCP03WF104F05RL */
+	tboard_thermistor1: thermal-sensor-t1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <	(-10000) 1553
+						(-5000) 1485
+						0 1406
+						5000 1317
+						10000 1219
+						15000 1115
+						20000 1007
+						25000 900
+						30000 796
+						35000 697
+						40000 605
+						45000 523
+						50000 449
+						55000 384
+						60000 327
+						65000 279
+						70000 237
+						75000 202
+						80000 172
+						85000 147
+						90000 125
+						95000 107
+						100000 92
+						105000 79
+						110000 68
+						115000 59
+						120000 51
+						125000 44>;
+	};
+
+	tboard_thermistor2: thermal-sensor-t2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <	(-10000) 1553
+						(-5000) 1485
+						0 1406
+						5000 1317
+						10000 1219
+						15000 1115
+						20000 1007
+						25000 900
+						30000 796
+						35000 697
+						40000 605
+						45000 523
+						50000 449
+						55000 384
+						60000 327
+						65000 279
+						70000 237
+						75000 202
+						80000 172
+						85000 147
+						90000 125
+						95000 107
+						100000 92
+						105000 79
+						110000 68
+						115000 59
+						120000 51
+						125000 44>;
+	};
+
 	usb_vbus: regulator-5v0-usb-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb-vbus";
@@ -104,6 +206,290 @@
 		enable-active-high;
 		regulator-always-on;
 	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xd80000>;
+			no-map;
+		};
+
+		afe_mem: memory@60d80000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60d80000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_device_mem: memory@60e80000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60e80000 0 0x280000>;
+			no-map;
+		};
+	};
+
+	spk_amplifier: rt1019p {
+		compatible = "realtek,rt1019p";
+		label = "rt1019p";
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rt1019p_pins_default>;
+		sdb-gpios = <&pio 100 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&adsp {
+	status = "okay";
+
+	memory-region = <&adsp_device_mem>, <&adsp_mem>;
+};
+
+&afe {
+	status = "okay";
+
+	mediatek,etdm-in2-cowork-source = <2>;
+	mediatek,etdm-out2-cowork-source = <0>;
+	memory-region = <&afe_mem>;
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu2 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu3 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu5 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu6 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu7 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsc0_in>;
+};
+
+&dp_intf0 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dp_intf0_in: endpoint {
+				remote-endpoint = <&merge0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dp_intf0_out: endpoint {
+				remote-endpoint = <&edp_in>;
+			};
+		};
+	};
+};
+
+&dp_intf1 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			dp_intf1_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&merge5_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			dp_intf1_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dptx_in>;
+			};
+		};
+	};
+};
+
+&dsc0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsc0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsc0_out: endpoint {
+				remote-endpoint = <&merge0_in>;
+			};
+		};
+	};
+};
+
+&edp_tx {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&edptx_pins_default>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			edp_in: endpoint {
+				remote-endpoint = <&dp_intf0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			edp_out: endpoint {
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			power-supply = <&pp3300_disp_x>;
+			backlight = <&backlight_lcd0>;
+			port {
+				panel_in: endpoint {
+					remote-endpoint = <&edp_out>;
+				};
+			};
+		};
+	};
+};
+
+&ethdr0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			ethdr0_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&vdosys1_ep_ext>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ethdr0_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&merge5_in>;
+			};
+		};
+	};
+};
+
+&disp_pwm0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm0_pin_default>;
+};
+
+&dp_tx {
+	status = "okay";
+
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&dptx_pin>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			dptx_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dp_intf1_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dptx_out: endpoint {
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&gic {
+	mediatek,broken-save-restore-fw;
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&mt6315_7_vbuck1>;
 };
 
 &i2c0 {
@@ -121,6 +507,16 @@
 	i2c-scl-internal-delay-ns = <12500>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
+
+	trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		interrupts-extended = <&pio 6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+		vcc-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
 };
 
 &i2c2 {
@@ -129,6 +525,19 @@
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins>;
+
+	audio_codec: codec@1a {
+		/* Realtek RT5682i or RT5682s, sharing the same configuration */
+		reg = <0x1a>;
+		interrupts-extended = <&pio 89 IRQ_TYPE_EDGE_BOTH>;
+		#sound-dai-cells = <1>;
+		realtek,jd-src = <1>;
+
+		AVDD-supply = <&mt6359_vio18_ldo_reg>;
+		DBVDD-supply = <&mt6359_vio18_ldo_reg>;
+		MICVDD-supply = <&pp3300_z2>;
+		LDO1-IN-supply = <&mt6359_vio18_ldo_reg>;
+	};
 };
 
 &i2c3 {
@@ -137,6 +546,14 @@
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c3_pins>;
+
+	tpm@50 {
+		compatible = "google,cr50";
+		reg = <0x50>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cr50_int>;
+	};
 };
 
 &i2c4 {
@@ -175,7 +592,7 @@
 	pinctrl-0 = <&i2c7_pins>;
 
 	pmic@34 {
-		#interrupt-cells = <1>;
+		#interrupt-cells = <2>;
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
 		interrupt-controller;
@@ -187,6 +604,64 @@
 	};
 };
 
+&merge0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			merge0_in: endpoint {
+				remote-endpoint = <&dsc0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			merge0_out: endpoint {
+				remote-endpoint = <&dp_intf0_in>;
+			};
+		};
+	};
+};
+
+&merge5 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			merge5_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&ethdr0_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			merge5_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dp_intf1_in>;
+			};
+		};
+	};
+};
+
+&mfg0 {
+	domain-supply = <&mt6315_7_vbuck1>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
 &mmc0 {
 	status = "okay";
 
@@ -207,6 +682,29 @@
 	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
 };
 
+&mmc1 {
+	status = "okay";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 54 GPIO_ACTIVE_LOW>;
+	max-frequency = <200000000>;
+	no-mmc;
+	no-sdio;
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>, <&mmc1_pins_detect>;
+	pinctrl-1 = <&mmc1_pins_default>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&mt_pmic_vmch_ldo_reg>;
+	vqmmc-supply = <&mt_pmic_vmc_ldo_reg>;
+};
+
+&mt6359codec {
+	mediatek,dmic-mode = <1>;  /* one-wire */
+	mediatek,mic-type-0 = <2>; /* DMIC */
+};
+
 /* for CPU-L */
 &mt6359_vcore_buck_reg {
 	regulator-always-on;
@@ -234,7 +732,6 @@
 
 /* for GPU SRAM */
 &mt6359_vsram_others_ldo_reg {
-	regulator-always-on;
 	regulator-min-microvolt = <750000>;
 	regulator-max-microvolt = <750000>;
 };
@@ -258,6 +755,17 @@
 	};
 };
 
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
+&pcie1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_pins_default>;
+};
+
 &pio {
 	mediatek,rsel-resistance-in-si-unit;
 	pinctrl-names = "default";
@@ -414,6 +922,70 @@
 		"AP_SPI_FLASH_MOSI",
 		"AP_SPI_FLASH_MISO";
 
+	aud_pins_default: audio-default-pins {
+		pins-cmd-dat {
+		    pinmux = <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>,
+			     <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>,
+			     <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>,
+			     <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>,
+			     <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>,
+			     <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>,
+			     <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>,
+			     <PINMUX_GPIO0__FUNC_TDMIN_MCK>,
+			     <PINMUX_GPIO1__FUNC_TDMIN_DI>,
+			     <PINMUX_GPIO2__FUNC_TDMIN_LRCK>,
+			     <PINMUX_GPIO3__FUNC_TDMIN_BCK>,
+			     <PINMUX_GPIO60__FUNC_I2SO2_D0>,
+			     <PINMUX_GPIO49__FUNC_I2SIN_D0>,
+			     <PINMUX_GPIO50__FUNC_I2SO1_MCK>,
+			     <PINMUX_GPIO51__FUNC_I2SO1_BCK>,
+			     <PINMUX_GPIO52__FUNC_I2SO1_WS>,
+			     <PINMUX_GPIO53__FUNC_I2SO1_D0>;
+		};
+
+		pins-hp-jack-int-odl {
+			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	cr50_int: cr50-irq-default-pins {
+		pins-gsc-ap-int-odl {
+			pinmux = <PINMUX_GPIO88__FUNC_GPIO88>;
+			input-enable;
+		};
+	};
+
+	cros_ec_int: cros-ec-irq-default-pins {
+		pins-ec-ap-int-odl {
+			pinmux = <PINMUX_GPIO4__FUNC_GPIO4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			input-enable;
+		};
+	};
+
+	edptx_pins_default: edptx-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO7__FUNC_EDP_TX_HPD>;
+			bias-pull-up;
+		};
+	};
+
+	disp_pwm0_pin_default: disp-pwm0-default-pins {
+		pins-disp-pwm {
+			pinmux = <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO97__FUNC_DISP_PWM0>;
+		};
+	};
+
+	dptx_pin: dptx-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO18__FUNC_DP_TX_HPD>;
+			bias-pull-up;
+		};
+	};
+
 	i2c0_pins: i2c0-default-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
@@ -540,6 +1112,32 @@
 		};
 	};
 
+	mmc1_pins_detect: mmc1-detect-pins {
+		pins-insert {
+			pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_default: mmc1-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
 	nor_pins_default: nor-default-pins {
 		pins-ck-io {
 			pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>,
@@ -556,6 +1154,30 @@
 		};
 	};
 
+	pcie0_pins_default: pcie0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
+				 <PINMUX_GPIO20__FUNC_PERSTN>,
+				 <PINMUX_GPIO21__FUNC_CLKREQN>;
+				 bias-pull-up;
+		};
+	};
+
+	pcie1_pins_default: pcie1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>,
+				 <PINMUX_GPIO23__FUNC_CLKREQN_1>,
+				 <PINMUX_GPIO24__FUNC_WAKEN_1>;
+				 bias-pull-up;
+		};
+	};
+
+	panel_fixed_pins: panel-pwr-default-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO55__FUNC_GPIO55>;
+		};
+	};
+
 	pio_default: pio-default-pins {
 		pins-wifi-enable {
 			pinmux = <PINMUX_GPIO58__FUNC_GPIO58>;
@@ -600,6 +1222,21 @@
 		};
 	};
 
+	rt1019p_pins_default: rt1019p-default-pins {
+		pins-amp-sdb {
+			pinmux = <PINMUX_GPIO100__FUNC_GPIO100>;
+			output-low;
+		};
+	};
+
+	scp_pins: scp-default-pins {
+		pins-vreq {
+			pinmux = <PINMUX_GPIO76__FUNC_SCP_VREQ_VAO>;
+			bias-disable;
+			input-enable;
+		};
+	};
+
 	spi0_pins: spi0-default-pins {
 		pins-cs-mosi-clk {
 			pinmux = <PINMUX_GPIO132__FUNC_SPIM0_CSB>,
@@ -622,6 +1259,14 @@
 		};
 	};
 
+	trackpad_pins: trackpad-default-pins {
+		pins-int-n {
+			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
 	touchscreen_pins: touchscreen-default-pins {
 		pins-int-n {
 			pinmux = <PINMUX_GPIO92__FUNC_GPIO92>;
@@ -643,12 +1288,206 @@
 	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
 };
 
+&scp {
+	status = "okay";
+
+	firmware-name = "mediatek/mt8195/scp.img";
+	memory-region = <&scp_mem>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&scp_pins>;
+
+	cros-ec-rpmsg {
+		compatible = "google,cros-ec-rpmsg";
+		mediatek,rpmsg-name = "cros-ec-rpmsg";
+	};
+};
+
+&sound {
+	status = "okay";
+
+	mediatek,adsp = <&adsp>;
+	mediatek,dai-link =
+		"DL10_FE", "DPTX_BE", "ETDM1_IN_BE", "ETDM2_IN_BE",
+		"ETDM1_OUT_BE", "ETDM2_OUT_BE","UL_SRC1_BE",
+		"AFE_SOF_DL2", "AFE_SOF_DL3", "AFE_SOF_UL4", "AFE_SOF_UL5";
+	pinctrl-names = "default";
+	pinctrl-0 = <&aud_pins_default>;
+
+	audio-routing =
+		"Headphone", "HPOL",
+		"Headphone", "HPOR",
+		"IN1P", "Headset Mic",
+		"Ext Spk", "Speaker";
+
+	mm-dai-link {
+		link-name = "ETDM1_IN_BE";
+		mediatek,clk-provider = "cpu";
+	};
+
+	hs-playback-dai-link {
+		link-name = "ETDM1_OUT_BE";
+		mediatek,clk-provider = "cpu";
+		codec {
+			sound-dai = <&audio_codec 0>;
+		};
+	};
+
+	hs-capture-dai-link {
+		link-name = "ETDM2_IN_BE";
+		mediatek,clk-provider = "cpu";
+		codec {
+			sound-dai = <&audio_codec 0>;
+		};
+	};
+
+	spk-playback-dai-link {
+		link-name = "ETDM2_OUT_BE";
+		mediatek,clk-provider = "cpu";
+		codec {
+			sound-dai = <&spk_amplifier>;
+		};
+	};
+
+	displayport-dai-link {
+		link-name = "DPTX_BE";
+		codec {
+			sound-dai = <&dp_tx>;
+		};
+	};
+};
+
 &spi0 {
 	status = "okay";
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
 	mediatek,pad-select = <0>;
+
+	cros_ec: ec@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupts-extended = <&pio 4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cros_ec_int>;
+		spi-max-frequency = <3000000>;
+		wakeup-source;
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mt_pmic_vmc_ldo_reg: regulator@0 {
+			compatible = "google,cros-ec-regulator";
+			reg = <0>;
+			regulator-name = "mt_pmic_vmc_ldo";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <3600000>;
+		};
+
+		mt_pmic_vmch_ldo_reg: regulator@1 {
+			compatible = "google,cros-ec-regulator";
+			reg = <1>;
+			regulator-name = "mt_pmic_vmch_ldo";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3600000>;
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+	};
+};
+
+&spmi {
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	mt6315@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-name = "Vbcpu";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-ramp-delay = <6250>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mt6315@7 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x7 SPMI_USID>;
+
+		regulators {
+			mt6315_7_vbuck1: vbuck1 {
+				regulator-name = "Vgpu";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-ramp-delay = <6250>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+		};
+	};
+};
+
+&thermal_zones {
+	soc-area-thermal {
+		polling-delay = <1000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&tboard_thermistor1>;
+
+		trips {
+			trip-crit {
+				temperature = <84000>;
+				hysteresis = <1000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pmic-area-thermal {
+		polling-delay = <1000>;
+		polling-delay-passive = <0>;
+		thermal-sensors = <&tboard_thermistor2>;
+
+		trips {
+			trip-crit {
+				temperature = <84000>;
+				hysteresis = <1000>;
+				type = "critical";
+			};
+		};
+	};
 };
 
 &u3phy0 {
@@ -671,24 +1510,71 @@
 	status = "okay";
 };
 
-&xhci0 {
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
+
+/*
+ * For the USB Type-C ports the role and alternate modes switching is
+ * done by the EC so we set dr_mode to host to avoid interfering.
+ */
+&ssusb0 {
+	dr_mode = "host";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
+};
 
+&ssusb2 {
+	dr_mode = "host";
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb3 {
+	dr_mode = "host";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&vdosys1 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys1_ep_ext: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ethdr0_in>;
+		};
+	};
+};
+
+&xhci0 {
+	status = "okay";
+
+	rx-fifo-depth = <3072>;
 	vbus-supply = <&usb_vbus>;
 };
 
 &xhci1 {
 	status = "okay";
 
+	phys = <&u2port1 PHY_TYPE_USB2>;
+	rx-fifo-depth = <3072>;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&usb_vbus>;
+	mediatek,u3p-dis-msk = <1>;
 };
 
 &xhci2 {
 	status = "okay";
-
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&usb_vbus>;
 };
 
@@ -697,6 +1583,43 @@
 
 	/* MT7921's USB Bluetooth has issues with USB2 LPM */
 	usb2-lpm-disable;
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&usb_vbus>;
 };
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+
+		/* T11 to T13 are present only on Dojo */
+		MATRIX_KEY(0x00, 0x01, 0)	/* T11 */
+		MATRIX_KEY(0x01, 0x05, 0)	/* T12 */
+		MATRIX_KEY(0x03, 0x05, 0)	/* T13 */
+	>;
+
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 4fbd99eb496a..1f59b5786b81 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -48,7 +48,7 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0 0x40000000 0 0x80000000>;
+		reg = <0 0x40000000 0x2 0x00000000>;
 	};
 
 	reserved-memory {
@@ -56,13 +56,8 @@
 		#size-cells = <2>;
 		ranges;
 
-		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
-		bl31_secmon_reserved: secmon@54600000 {
-			no-map;
-			reg = <0 0x54600000 0x0 0x30000>;
-		};
-
-		/* 12 MiB reserved for OP-TEE (BL32)
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
 		 * +-----------------------+ 0x43e0_0000
 		 * |      SHMEM 2MiB       |
 		 * +-----------------------+ 0x43c0_0000
@@ -75,6 +70,52 @@
 			no-map;
 			reg = <0 0x43200000 0 0x00c00000>;
 		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		vpu_mem: memory@53000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_mem: memory@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x200000>;
+		};
+
+		snd_dma_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0x1100000>;
+			no-map;
+		};
+
+		apu_mem: memory@62000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
+		};
+	};
+};
+
+&eth {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy0>;
+	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
+	snps,reset-delays-us = <0 10000 80000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	mediatek,mac-wol;
+	status = "okay";
+
+	mdio {
+		ethernet_phy0: ethernet-phy@1 {
+			reg = <0x1>;
+		};
 	};
 };
 
@@ -88,6 +129,7 @@
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
 		interrupt-controller;
+		#interrupt-cells = <1>;
 		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-names = "IRQB";
 
@@ -96,7 +138,6 @@
 			richtek,vinovp-microvolt = <14500000>;
 
 			otg_vbus_regulator: usb-otg-vbus-regulator {
-				regulator-compatible = "usb-otg-vbus";
 				regulator-name = "usb-otg-vbus";
 				regulator-min-microvolt = <4425000>;
 				regulator-max-microvolt = <5825000>;
@@ -108,7 +149,6 @@
 			LDO_VIN3-supply = <&mt6360_buck2>;
 
 			mt6360_buck1: buck1 {
-				regulator-compatible = "BUCK1";
 				regulator-name = "mt6360,buck1";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
@@ -119,7 +159,6 @@
 			};
 
 			mt6360_buck2: buck2 {
-				regulator-compatible = "BUCK2";
 				regulator-name = "mt6360,buck2";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
@@ -130,7 +169,6 @@
 			};
 
 			mt6360_ldo1: ldo1 {
-				regulator-compatible = "LDO1";
 				regulator-name = "mt6360,ldo1";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@@ -139,7 +177,6 @@
 			};
 
 			mt6360_ldo2: ldo2 {
-				regulator-compatible = "LDO2";
 				regulator-name = "mt6360,ldo2";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@@ -148,7 +185,6 @@
 			};
 
 			mt6360_ldo3: ldo3 {
-				regulator-compatible = "LDO3";
 				regulator-name = "mt6360,ldo3";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@@ -157,7 +193,6 @@
 			};
 
 			mt6360_ldo5: ldo5 {
-				regulator-compatible = "LDO5";
 				regulator-name = "mt6360,ldo5";
 				regulator-min-microvolt = <2700000>;
 				regulator-max-microvolt = <3600000>;
@@ -166,7 +201,6 @@
 			};
 
 			mt6360_ldo6: ldo6 {
-				regulator-compatible = "LDO6";
 				regulator-name = "mt6360,ldo6";
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
@@ -175,7 +209,6 @@
 			};
 
 			mt6360_ldo7: ldo7 {
-				regulator-compatible = "LDO7";
 				regulator-name = "mt6360,ldo7";
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
@@ -258,6 +291,66 @@
 };
 
 &pio {
+	eth_default_pins: eth-default-pins {
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
+				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
+				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
+				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
+			drive-strength = <8>;
+		};
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
+				 <PINMUX_GPIO88__FUNC_GBE_TXEN>,
+				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
+				 <PINMUX_GPIO86__FUNC_GBE_RXC>;
+			drive-strength = <8>;
+		};
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
+				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
+				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
+				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
+		};
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
+				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
+			input-enable;
+		};
+		pins-power {
+			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
+				 <PINMUX_GPIO92__FUNC_GPIO92>;
+			output-high;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_GPIO78>,
+				 <PINMUX_GPIO79__FUNC_GPIO79>,
+				 <PINMUX_GPIO80__FUNC_GPIO80>;
+		};
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
+				 <PINMUX_GPIO88__FUNC_GPIO88>,
+				 <PINMUX_GPIO87__FUNC_GPIO87>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>;
+		};
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
+				 <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO83__FUNC_GPIO83>,
+				 <PINMUX_GPIO84__FUNC_GPIO84>;
+		};
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
+				 <PINMUX_GPIO90__FUNC_GPIO90>;
+			input-disable;
+			bias-disable;
+		};
+	};
+
 	gpio_keys_pins: gpio-keys-pins {
 		pins {
 			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
@@ -276,7 +369,7 @@
 	mmc0_default_pins: mmc0-default-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -291,13 +384,13 @@
 				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
 				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
 		pins-rst {
 			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
@@ -305,7 +398,7 @@
 	mmc0_uhs_pins: mmc0-uhs-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -320,19 +413,19 @@
 				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
 				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
 		pins-ds {
 			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins-rst {
 			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
@@ -340,7 +433,7 @@
 	mmc1_default_pins: mmc1-default-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -351,7 +444,7 @@
 				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
@@ -364,7 +457,7 @@
 	mmc1_uhs_pins: mmc1-uhs-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -375,7 +468,7 @@
 				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
@@ -428,8 +521,22 @@
 	status = "okay";
 };
 
-&xhci0 {
+&ssusb0 {
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb3 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci0 {
 	vbus-supply = <&otg_vbus_regulator>;
 	status = "okay";
 };
@@ -440,11 +547,9 @@
 };
 
 &xhci2 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
 };
 
 &xhci3 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
index 690dc7717f2c..83456d649ff7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
@@ -74,7 +74,6 @@
 			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
 				 <PINMUX_GPIO9__FUNC_SCL0>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-			mediatek,drive-strength-adv = <0>;
 			drive-strength = <6>;
 		};
 	};
@@ -84,7 +83,6 @@
 			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
 				 <PINMUX_GPIO11__FUNC_SCL1>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-			mediatek,drive-strength-adv = <0>;
 			drive-strength = <6>;
 		};
 	};
@@ -94,7 +92,7 @@
 			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
 				 <PINMUX_GPIO17__FUNC_SCL4>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-			mediatek,drive-strength-adv = <7>;
+			drive-strength-microamp = <1000>;
 		};
 	};
 
@@ -160,6 +158,18 @@
 	status = "okay";
 };
 
+&ssusb0 {
+	status = "okay";
+};
+
+&ssusb2 {
+	status = "okay";
+};
+
+&ssusb3 {
+	status = "okay";
+};
+
 &xhci0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 066c14989708..ec452d657031 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -6,10 +6,16 @@
 
 /dts-v1/;
 #include <dt-bindings/clock/mt8195-clk.h>
+#include <dt-bindings/gce/mt8195-gce.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/memory/mt8195-memory-port.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/power/mt8195-power.h>
+#include <dt-bindings/reset/mt8195-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
 
 / {
 	compatible = "mediatek,mt8195";
@@ -17,6 +23,29 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		dp-intf0 = &dp_intf0;
+		dp-intf1 = &dp_intf1;
+		gce0 = &gce0;
+		gce1 = &gce1;
+		ethdr0 = &ethdr0;
+		mutex0 = &mutex;
+		mutex1 = &mutex1;
+		merge1 = &merge1;
+		merge2 = &merge2;
+		merge3 = &merge3;
+		merge4 = &merge4;
+		merge5 = &merge5;
+		vdo1-rdma0 = &vdo1_rdma0;
+		vdo1-rdma1 = &vdo1_rdma1;
+		vdo1-rdma2 = &vdo1_rdma2;
+		vdo1-rdma3 = &vdo1_rdma3;
+		vdo1-rdma4 = &vdo1_rdma4;
+		vdo1-rdma5 = &vdo1_rdma5;
+		vdo1-rdma6 = &vdo1_rdma6;
+		vdo1-rdma7 = &vdo1_rdma7;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -26,9 +55,16 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x000>;
 			enable-method = "psci";
+			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
-			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			capacity-dmips-mhz = <308>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
@@ -38,9 +74,16 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x100>;
 			enable-method = "psci";
+			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
-			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			capacity-dmips-mhz = <308>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
@@ -50,9 +93,16 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x200>;
 			enable-method = "psci";
+			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
-			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			capacity-dmips-mhz = <308>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
@@ -62,9 +112,16 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x300>;
 			enable-method = "psci";
+			performance-domains = <&performance 0>;
 			clock-frequency = <1701000000>;
-			capacity-dmips-mhz = <578>;
-			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			capacity-dmips-mhz = <308>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
@@ -74,9 +131,16 @@
 			compatible = "arm,cortex-a78";
 			reg = <0x400>;
 			enable-method = "psci";
+			performance-domains = <&performance 1>;
 			clock-frequency = <2171000000>;
 			capacity-dmips-mhz = <1024>;
-			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
 			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
@@ -86,9 +150,16 @@
 			compatible = "arm,cortex-a78";
 			reg = <0x500>;
 			enable-method = "psci";
+			performance-domains = <&performance 1>;
 			clock-frequency = <2171000000>;
 			capacity-dmips-mhz = <1024>;
-			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
 			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
@@ -98,9 +169,16 @@
 			compatible = "arm,cortex-a78";
 			reg = <0x600>;
 			enable-method = "psci";
+			performance-domains = <&performance 1>;
 			clock-frequency = <2171000000>;
 			capacity-dmips-mhz = <1024>;
-			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
 			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
@@ -110,9 +188,16 @@
 			compatible = "arm,cortex-a78";
 			reg = <0x700>;
 			enable-method = "psci";
+			performance-domains = <&performance 1>;
 			clock-frequency = <2171000000>;
 			capacity-dmips-mhz = <1024>;
-			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
 			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
@@ -134,22 +219,20 @@
 				core3 {
 					cpu = <&cpu3>;
 				};
-			};
 
-			cluster1 {
-				core0 {
+				core4 {
 					cpu = <&cpu4>;
 				};
 
-				core1 {
+				core5 {
 					cpu = <&cpu5>;
 				};
 
-				core2 {
+				core6 {
 					cpu = <&cpu6>;
 				};
 
-				core3 {
+				core7 {
 					cpu = <&cpu7>;
 				};
 			};
@@ -158,7 +241,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			cpu_off_l: cpu-off-l {
+			cpu_ret_l: cpu-retention-l {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x00010001>;
 				local-timer-stop;
@@ -167,7 +250,7 @@
 				min-residency-us = <580>;
 			};
 
-			cpu_off_b: cpu-off-b {
+			cpu_ret_b: cpu-retention-b {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x00010001>;
 				local-timer-stop;
@@ -176,7 +259,7 @@
 				min-residency-us = <740>;
 			};
 
-			cluster_off_l: cluster-off-l {
+			cpu_off_l: cpu-off-l {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x01010002>;
 				local-timer-stop;
@@ -185,7 +268,7 @@
 				min-residency-us = <840>;
 			};
 
-			cluster_off_b: cluster-off-b {
+			cpu_off_b: cpu-off-b {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x01010002>;
 				local-timer-stop;
@@ -197,16 +280,31 @@
 
 		l2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
 			next-level-cache = <&l3_0>;
+			cache-unified;
 		};
 
 		l2_1: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
 			next-level-cache = <&l3_0>;
+			cache-unified;
 		};
 
 		l3_0: l3-cache {
 			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-unified;
 		};
 	};
 
@@ -215,6 +313,27 @@
 		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
 		cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
 		       <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+		status = "fail";
+	};
+
+	dmic_codec: dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+	};
+
+	sound: mt8195-sound {
+		mediatek,platform = <&afe>;
+		status = "disabled";
+	};
+
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
 	};
 
 	clk26m: oscillator-26m {
@@ -231,6 +350,82 @@
 		clock-output-names = "clk32k";
 	};
 
+	performance: performance-controller@11bc10 {
+		compatible = "mediatek,cpufreq-hw";
+		reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+		#performance-domain-cells = <1>;
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-390000000 {
+			opp-hz = /bits/ 64 <390000000>;
+			opp-microvolt = <625000>;
+		};
+		opp-410000000 {
+			opp-hz = /bits/ 64 <410000000>;
+			opp-microvolt = <631250>;
+		};
+		opp-431000000 {
+			opp-hz = /bits/ 64 <431000000>;
+			opp-microvolt = <631250>;
+		};
+		opp-473000000 {
+			opp-hz = /bits/ 64 <473000000>;
+			opp-microvolt = <637500>;
+		};
+		opp-515000000 {
+			opp-hz = /bits/ 64 <515000000>;
+			opp-microvolt = <637500>;
+		};
+		opp-556000000 {
+			opp-hz = /bits/ 64 <556000000>;
+			opp-microvolt = <643750>;
+		};
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <650000>;
+		};
+		opp-640000000 {
+			opp-hz = /bits/ 64 <640000000>;
+			opp-microvolt = <650000>;
+		};
+		opp-670000000 {
+			opp-hz = /bits/ 64 <670000000>;
+			opp-microvolt = <662500>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <675000>;
+		};
+		opp-730000000 {
+			opp-hz = /bits/ 64 <730000000>;
+			opp-microvolt = <687500>;
+		};
+		opp-760000000 {
+			opp-hz = /bits/ 64 <760000000>;
+			opp-microvolt = <700000>;
+		};
+		opp-790000000 {
+			opp-hz = /bits/ 64 <790000000>;
+			opp-microvolt = <712500>;
+		};
+		opp-820000000 {
+			opp-hz = /bits/ 64 <820000000>;
+			opp-microvolt = <725000>;
+		};
+		opp-850000000 {
+			opp-hz = /bits/ 64 <850000000>;
+			opp-microvolt = <737500>;
+		};
+		opp-880000000 {
+			opp-hz = /bits/ 64 <880000000>;
+			opp-microvolt = <750000>;
+		};
+	};
+
 	pmu-a55 {
 		compatible = "arm,cortex-a55-pmu";
 		interrupt-parent = <&gic>;
@@ -262,6 +457,7 @@
 		#size-cells = <2>;
 		compatible = "simple-bus";
 		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x4 0x0>;
 
 		gic: interrupt-controller@c000000 {
 			compatible = "arm,gic-v3";
@@ -291,7 +487,7 @@
 		};
 
 		infracfg_ao: syscon@10001000 {
-			compatible = "mediatek,mt8195-infracfg_ao", "syscon", "simple-mfd";
+			compatible = "mediatek,mt8195-infracfg_ao", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -324,10 +520,345 @@
 			#interrupt-cells = <2>;
 		};
 
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8195-scpsys", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8195-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domain of the SoC */
+				mfg0: power-domain@MT8195_POWER_DOMAIN_MFG0 {
+					reg = <MT8195_POWER_DOMAIN_MFG0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					mfg1: power-domain@MT8195_POWER_DOMAIN_MFG1 {
+						reg = <MT8195_POWER_DOMAIN_MFG1>;
+						clocks = <&apmixedsys CLK_APMIXED_MFGPLL>,
+							 <&topckgen CLK_TOP_MFG_CORE_TMP>;
+						clock-names = "mfg", "alt";
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8195_POWER_DOMAIN_MFG2 {
+							reg = <MT8195_POWER_DOMAIN_MFG2>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_MFG3 {
+							reg = <MT8195_POWER_DOMAIN_MFG3>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_MFG4 {
+							reg = <MT8195_POWER_DOMAIN_MFG4>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_MFG5 {
+							reg = <MT8195_POWER_DOMAIN_MFG5>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_MFG6 {
+							reg = <MT8195_POWER_DOMAIN_MFG6>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_VPPSYS0 {
+					reg = <MT8195_POWER_DOMAIN_VPPSYS0>;
+					clocks = <&topckgen CLK_TOP_VPP>,
+						 <&topckgen CLK_TOP_CAM>,
+						 <&topckgen CLK_TOP_CCU>,
+						 <&topckgen CLK_TOP_IMG>,
+						 <&topckgen CLK_TOP_VENC>,
+						 <&topckgen CLK_TOP_VDEC>,
+						 <&topckgen CLK_TOP_WPE_VPP>,
+						 <&topckgen CLK_TOP_CFG_VPP0>,
+						 <&vppsys0 CLK_VPP0_SMI_COMMON>,
+						 <&vppsys0 CLK_VPP0_GALS_VDO0_LARB0>,
+						 <&vppsys0 CLK_VPP0_GALS_VDO0_LARB1>,
+						 <&vppsys0 CLK_VPP0_GALS_VENCSYS>,
+						 <&vppsys0 CLK_VPP0_GALS_VENCSYS_CORE1>,
+						 <&vppsys0 CLK_VPP0_GALS_INFRA>,
+						 <&vppsys0 CLK_VPP0_GALS_CAMSYS>,
+						 <&vppsys0 CLK_VPP0_GALS_VPP1_LARB5>,
+						 <&vppsys0 CLK_VPP0_GALS_VPP1_LARB6>,
+						 <&vppsys0 CLK_VPP0_SMI_REORDER>,
+						 <&vppsys0 CLK_VPP0_SMI_IOMMU>,
+						 <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>,
+						 <&vppsys0 CLK_VPP0_GALS_EMI0_EMI1>,
+						 <&vppsys0 CLK_VPP0_SMI_SUB_COMMON_REORDER>,
+						 <&vppsys0 CLK_VPP0_SMI_RSI>,
+						 <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>,
+						 <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>,
+						 <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>,
+						 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>;
+					clock-names = "vppsys", "vppsys1", "vppsys2", "vppsys3",
+						      "vppsys4", "vppsys5", "vppsys6", "vppsys7",
+						      "vppsys0-0", "vppsys0-1", "vppsys0-2", "vppsys0-3",
+						      "vppsys0-4", "vppsys0-5", "vppsys0-6", "vppsys0-7",
+						      "vppsys0-8", "vppsys0-9", "vppsys0-10", "vppsys0-11",
+						      "vppsys0-12", "vppsys0-13", "vppsys0-14",
+						      "vppsys0-15", "vppsys0-16", "vppsys0-17",
+						      "vppsys0-18";
+					mediatek,infracfg = <&infracfg_ao>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8195_POWER_DOMAIN_VDOSYS0 {
+						reg = <MT8195_POWER_DOMAIN_VDOSYS0>;
+						clocks = <&topckgen CLK_TOP_CFG_VDO0>,
+							 <&vdosys0 CLK_VDO0_SMI_GALS>,
+							 <&vdosys0 CLK_VDO0_SMI_COMMON>,
+							 <&vdosys0 CLK_VDO0_SMI_EMI>,
+							 <&vdosys0 CLK_VDO0_SMI_IOMMU>,
+							 <&vdosys0 CLK_VDO0_SMI_LARB>,
+							 <&vdosys0 CLK_VDO0_SMI_RSI>;
+						clock-names = "vdosys0", "vdosys0-0", "vdosys0-1",
+							      "vdosys0-2", "vdosys0-3",
+							      "vdosys0-4", "vdosys0-5";
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8195_POWER_DOMAIN_VPPSYS1 {
+							reg = <MT8195_POWER_DOMAIN_VPPSYS1>;
+							clocks = <&topckgen CLK_TOP_CFG_VPP1>,
+								 <&vppsys1 CLK_VPP1_VPPSYS1_GALS>,
+								 <&vppsys1 CLK_VPP1_VPPSYS1_LARB>;
+							clock-names = "vppsys1", "vppsys1-0",
+								      "vppsys1-1";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_WPESYS {
+							reg = <MT8195_POWER_DOMAIN_WPESYS>;
+							clocks = <&wpesys CLK_WPE_SMI_LARB7>,
+								 <&wpesys CLK_WPE_SMI_LARB8>,
+								 <&wpesys CLK_WPE_SMI_LARB7_P>,
+								 <&wpesys CLK_WPE_SMI_LARB8_P>;
+							clock-names = "wepsys-0", "wepsys-1", "wepsys-2",
+								      "wepsys-3";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_VDEC0 {
+							reg = <MT8195_POWER_DOMAIN_VDEC0>;
+							clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
+							clock-names = "vdec0-0";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <0>;
+
+							power-domain@MT8195_POWER_DOMAIN_VDEC1 {
+								reg = <MT8195_POWER_DOMAIN_VDEC1>;
+								clocks = <&vdecsys CLK_VDEC_LARB1>;
+								clock-names = "vdec1-0";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_VDEC2 {
+								reg = <MT8195_POWER_DOMAIN_VDEC2>;
+								clocks = <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>;
+								clock-names = "vdec2-0";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_VENC {
+							reg = <MT8195_POWER_DOMAIN_VENC>;
+							clocks = <&vencsys CLK_VENC_LARB>;
+							clock-names = "venc0-larb";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <0>;
+
+							power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 {
+								reg = <MT8195_POWER_DOMAIN_VENC_CORE1>;
+								clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>;
+								clock-names = "venc1-larb";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_VDOSYS1 {
+							reg = <MT8195_POWER_DOMAIN_VDOSYS1>;
+							clocks = <&topckgen CLK_TOP_CFG_VDO1>,
+								 <&vdosys1 CLK_VDO1_SMI_LARB2>,
+								 <&vdosys1 CLK_VDO1_SMI_LARB3>,
+								 <&vdosys1 CLK_VDO1_GALS>;
+							clock-names = "vdosys1", "vdosys1-0",
+								      "vdosys1-1", "vdosys1-2";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <1>;
+
+							power-domain@MT8195_POWER_DOMAIN_DP_TX {
+								reg = <MT8195_POWER_DOMAIN_DP_TX>;
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_EPD_TX {
+								reg = <MT8195_POWER_DOMAIN_EPD_TX>;
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_HDMI_TX {
+								reg = <MT8195_POWER_DOMAIN_HDMI_TX>;
+								clocks = <&topckgen CLK_TOP_HDMI_APB>;
+								clock-names = "hdmi_tx";
+								#power-domain-cells = <0>;
+							};
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_IMG {
+							reg = <MT8195_POWER_DOMAIN_IMG>;
+							clocks = <&imgsys CLK_IMG_LARB9>,
+								 <&imgsys CLK_IMG_GALS>;
+							clock-names = "img-0", "img-1";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <1>;
+
+							power-domain@MT8195_POWER_DOMAIN_DIP {
+								reg = <MT8195_POWER_DOMAIN_DIP>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_IPE {
+								reg = <MT8195_POWER_DOMAIN_IPE>;
+								clocks = <&topckgen CLK_TOP_IPE>,
+									 <&imgsys CLK_IMG_IPE>,
+									 <&ipesys CLK_IPE_SMI_LARB12>;
+								clock-names = "ipe", "ipe-0", "ipe-1";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_CAM {
+							reg = <MT8195_POWER_DOMAIN_CAM>;
+							clocks = <&camsys CLK_CAM_LARB13>,
+								 <&camsys CLK_CAM_LARB14>,
+								 <&camsys CLK_CAM_CAM2MM0_GALS>,
+								 <&camsys CLK_CAM_CAM2MM1_GALS>,
+								 <&camsys CLK_CAM_CAM2SYS_GALS>;
+							clock-names = "cam-0", "cam-1", "cam-2", "cam-3",
+								      "cam-4";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <1>;
+
+							power-domain@MT8195_POWER_DOMAIN_CAM_RAWA {
+								reg = <MT8195_POWER_DOMAIN_CAM_RAWA>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_CAM_RAWB {
+								reg = <MT8195_POWER_DOMAIN_CAM_RAWB>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_CAM_MRAW {
+								reg = <MT8195_POWER_DOMAIN_CAM_MRAW>;
+								#power-domain-cells = <0>;
+							};
+						};
+					};
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_PCIE_MAC_P0 {
+					reg = <MT8195_POWER_DOMAIN_PCIE_MAC_P0>;
+					mediatek,infracfg = <&infracfg_ao>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_PCIE_MAC_P1 {
+					reg = <MT8195_POWER_DOMAIN_PCIE_MAC_P1>;
+					mediatek,infracfg = <&infracfg_ao>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_PCIE_PHY {
+					reg = <MT8195_POWER_DOMAIN_PCIE_PHY>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY {
+					reg = <MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_CSI_RX_TOP {
+					reg = <MT8195_POWER_DOMAIN_CSI_RX_TOP>;
+					clocks = <&topckgen CLK_TOP_SENINF>,
+						 <&topckgen CLK_TOP_SENINF2>;
+					clock-names = "csi_rx_top", "csi_rx_top1";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_ETHER {
+					reg = <MT8195_POWER_DOMAIN_ETHER>;
+					clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>;
+					clock-names = "ether";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_ADSP {
+					reg = <MT8195_POWER_DOMAIN_ADSP>;
+					clocks = <&topckgen CLK_TOP_ADSP>,
+						 <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>;
+					clock-names = "adsp", "adsp1";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					mediatek,infracfg = <&infracfg_ao>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8195_POWER_DOMAIN_AUDIO {
+						reg = <MT8195_POWER_DOMAIN_AUDIO>;
+						clocks = <&topckgen CLK_TOP_A1SYS_HP>,
+							 <&topckgen CLK_TOP_AUD_INTBUS>,
+							 <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>,
+							 <&infracfg_ao CLK_INFRA_AO_AUDIO_26M_B>;
+						clock-names = "audio", "audio1", "audio2",
+							      "audio3";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+				};
+			};
+		};
+
 		watchdog: watchdog@10007000 {
-			compatible = "mediatek,mt8195-wdt",
-				     "mediatek,mt6589-wdt";
+			compatible = "mediatek,mt8195-wdt";
+			mediatek,disable-extrst;
 			reg = <0 0x10007000 0 0x100>;
+			#reset-cells = <1>;
 		};
 
 		apmixedsys: syscon@1000c000 {
@@ -341,7 +872,7 @@
 				     "mediatek,mt6765-timer";
 			reg = <0 0x10017000 0 0x1000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&topckgen CLK_TOP_CLK26M_D2>;
+			clocks = <&clk13m>;
 		};
 
 		pwrap: pwrap@10024000 {
@@ -356,12 +887,150 @@
 			assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>;
 		};
 
+		spmi: spmi@10027000 {
+			compatible = "mediatek,mt8195-spmi";
+			reg = <0 0x10027000 0 0x000e00>,
+			      <0 0x10029000 0 0x000100>;
+			reg-names = "pmif", "spmimst";
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>,
+				 <&topckgen CLK_TOP_SPMI_M_MST>;
+			clock-names = "pmif_sys_ck",
+				      "pmif_tmr_ck",
+				      "spmimst_clk_mux";
+			assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC>;
+			assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>;
+		};
+
+		iommu_infra: infra-iommu@10315000 {
+			compatible = "mediatek,mt8195-iommu-infra";
+			reg = <0 0x10315000 0 0x5000>;
+			interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 798 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH 0>;
+			#iommu-cells = <1>;
+		};
+
+		gce0: mailbox@10320000 {
+			compatible = "mediatek,mt8195-gce";
+			reg = <0 0x10320000 0 0x4000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_GCE>;
+		};
+
+		gce1: mailbox@10330000 {
+			compatible = "mediatek,mt8195-gce";
+			reg = <0 0x10330000 0 0x4000>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_GCE2>;
+		};
+
+		scp: scp@10500000 {
+			compatible = "mediatek,mt8195-scp";
+			reg = <0 0x10500000 0 0x100000>,
+			      <0 0x10720000 0 0xe0000>,
+			      <0 0x10700000 0 0x8000>;
+			reg-names = "sram", "cfg", "l1tcm";
+			interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
 		scp_adsp: clock-controller@10720000 {
 			compatible = "mediatek,mt8195-scp_adsp";
 			reg = <0 0x10720000 0 0x1000>;
 			#clock-cells = <1>;
 		};
 
+		adsp: dsp@10803000 {
+			compatible = "mediatek,mt8195-dsp";
+			reg = <0 0x10803000 0 0x1000>,
+			      <0 0x10840000 0 0x40000>;
+			reg-names = "cfg", "sram";
+			clocks = <&topckgen CLK_TOP_ADSP>,
+				 <&clk26m>,
+				 <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>,
+				 <&topckgen CLK_TOP_MAINPLL_D7_D2>,
+				 <&scp_adsp CLK_SCP_ADSP_AUDIODSP>,
+				 <&topckgen CLK_TOP_AUDIO_H>;
+			clock-names = "adsp_sel",
+				 "clk26m_ck",
+				 "audio_local_bus",
+				 "mainpll_d7_d2",
+				 "scp_adsp_audiodsp",
+				 "audio_h";
+			power-domains = <&spm MT8195_POWER_DOMAIN_ADSP>;
+			mbox-names = "rx", "tx";
+			mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+			status = "disabled";
+		};
+
+		adsp_mailbox0: mailbox@10816000 {
+			compatible = "mediatek,mt8195-adsp-mbox";
+			#mbox-cells = <0>;
+			reg = <0 0x10816000 0 0x1000>;
+			interrupts = <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		adsp_mailbox1: mailbox@10817000 {
+			compatible = "mediatek,mt8195-adsp-mbox";
+			#mbox-cells = <0>;
+			reg = <0 0x10817000 0 0x1000>;
+			interrupts = <GIC_SPI 703 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		afe: mt8195-afe-pcm@10890000 {
+			compatible = "mediatek,mt8195-audio";
+			reg = <0 0x10890000 0 0x10000>;
+			mediatek,topckgen = <&topckgen>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_AUDIO>;
+			interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>;
+			resets = <&watchdog 14>;
+			reset-names = "audiosys";
+			clocks = <&clk26m>,
+				<&apmixedsys CLK_APMIXED_APLL1>,
+				<&apmixedsys CLK_APMIXED_APLL2>,
+				<&topckgen CLK_TOP_APLL12_DIV0>,
+				<&topckgen CLK_TOP_APLL12_DIV1>,
+				<&topckgen CLK_TOP_APLL12_DIV2>,
+				<&topckgen CLK_TOP_APLL12_DIV3>,
+				<&topckgen CLK_TOP_APLL12_DIV9>,
+				<&topckgen CLK_TOP_A1SYS_HP>,
+				<&topckgen CLK_TOP_AUD_INTBUS>,
+				<&topckgen CLK_TOP_AUDIO_H>,
+				<&topckgen CLK_TOP_AUDIO_LOCAL_BUS>,
+				<&topckgen CLK_TOP_DPTX_MCK>,
+				<&topckgen CLK_TOP_I2SO1_MCK>,
+				<&topckgen CLK_TOP_I2SO2_MCK>,
+				<&topckgen CLK_TOP_I2SI1_MCK>,
+				<&topckgen CLK_TOP_I2SI2_MCK>,
+				<&infracfg_ao CLK_INFRA_AO_AUDIO_26M_B>,
+				<&scp_adsp CLK_SCP_ADSP_AUDIODSP>;
+			clock-names = "clk26m",
+				"apll1_ck",
+				"apll2_ck",
+				"apll12_div0",
+				"apll12_div1",
+				"apll12_div2",
+				"apll12_div3",
+				"apll12_div9",
+				"a1sys_hp_sel",
+				"aud_intbus_sel",
+				"audio_h_sel",
+				"audio_local_bus_sel",
+				"dptx_m_sel",
+				"i2so1_m_sel",
+				"i2so2_m_sel",
+				"i2si1_m_sel",
+				"i2si2_m_sel",
+				"infra_ao_audio_26m_b",
+				"scp_adsp_audiodsp";
+			status = "disabled";
+		};
+
 		uart0: serial@11001100 {
 			compatible = "mediatek,mt8195-uart",
 				     "mediatek,mt6577-uart";
@@ -452,6 +1121,52 @@
 			status = "disabled";
 		};
 
+		lvts_ap: thermal-sensor@1100b000 {
+			compatible = "mediatek,mt8195-lvts-ap";
+			reg = <0 0x1100b000 0 0xc00>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>;
+			nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+			nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
+			#thermal-sensor-cells = <1>;
+		};
+
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8195-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calib_data &lvts_efuse_data1>;
+			nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+			resets = <&infracfg_ao MT8195_INFRA_RST3_THERM_CTRL_PTP_SWRST>;
+			reset-names = "svs_rst";
+		};
+
+		disp_pwm0: pwm@1100e000 {
+			compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100e000 0 0x1000>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_LOW 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM0>,
+				 <&infracfg_ao CLK_INFRA_AO_DISP_PWM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		disp_pwm1: pwm@1100f000 {
+			compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100f000 0 0x1000>;
+			interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH 0>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM1>,
+				 <&infracfg_ao CLK_INFRA_AO_DISP_PWM1>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
 		spi1: spi@11010000 {
 			compatible = "mediatek,mt8195-spi",
 				     "mediatek,mt6765-spi";
@@ -544,27 +1259,132 @@
 			status = "disabled";
 		};
 
-		xhci0: usb@11200000 {
-			compatible = "mediatek,mt8195-xhci",
-				     "mediatek,mtk-xhci";
-			reg = <0 0x11200000 0 0x1000>,
-			      <0 0x11203e00 0 0x0100>;
+		eth: ethernet@11021000 {
+			compatible = "mediatek,mt8195-gmac", "snps,dwmac-5.10a";
+			reg = <0 0x11021000 0 0x4000>;
+			interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "macirq";
+			clock-names = "axi",
+				      "apb",
+				      "mac_main",
+				      "ptp_ref",
+				      "rmii_internal",
+				      "mac_cg";
+			clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET>,
+				 <&pericfg_ao CLK_PERI_AO_ETHERNET_BUS>,
+				 <&topckgen CLK_TOP_SNPS_ETH_250M>,
+				 <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
+				 <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>,
+				 <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>;
+			assigned-clocks = <&topckgen CLK_TOP_SNPS_ETH_250M>,
+					  <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
+					  <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>;
+			assigned-clock-parents = <&topckgen CLK_TOP_ETHPLL_D2>,
+						 <&topckgen CLK_TOP_ETHPLL_D8>,
+						 <&topckgen CLK_TOP_ETHPLL_D10>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_ETHER>;
+			mediatek,pericfg = <&infracfg_ao>;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup>;
+			snps,mtl-tx-config = <&mtl_tx_setup>;
+			snps,txpbl = <16>;
+			snps,rxpbl = <16>;
+			snps,clk-csr = <0>;
+			status = "disabled";
+
+			mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			stmmac_axi_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <0x7>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,blen = <0 0 0 0 16 8 4>;
+			};
+
+			mtl_rx_setup: rx-queues-config {
+				snps,rx-queues-to-use = <4>;
+				snps,rx-sched-sp;
+				queue0 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue1 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue2 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue3 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+			};
+
+			mtl_tx_setup: tx-queues-config {
+				snps,tx-queues-to-use = <4>;
+				snps,tx-sched-wrr;
+				queue0 {
+					snps,weight = <0x10>;
+					snps,dcb-algorithm;
+					snps,priority = <0x0>;
+				};
+				queue1 {
+					snps,weight = <0x11>;
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+				};
+				queue2 {
+					snps,weight = <0x12>;
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+				};
+				queue3 {
+					snps,weight = <0x13>;
+					snps,dcb-algorithm;
+					snps,priority = <0x3>;
+				};
+			};
+		};
+
+		ssusb0: usb@11201000 {
+			compatible = "mediatek,mt8195-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2dff>, <0 0x11203e00 0 0x0100>;
 			reg-names = "mac", "ippc";
-			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
-			phys = <&u2port0 PHY_TYPE_USB2>,
-			       <&u3port0 PHY_TYPE_USB3>;
-			assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
-					  <&topckgen CLK_TOP_SSUSB_XHCI>;
-			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
-						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			ranges = <0 0 0 0x11200000 0 0x3f00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
 				 <&topckgen CLK_TOP_SSUSB_REF>,
-				 <&apmixedsys CLK_APMIXED_USB1PLL>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "xhci_ck";
-			mediatek,syscon-wakeup = <&pericfg 0x400 103>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
 			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x400 103>;
 			status = "disabled";
+
+			xhci0: usb@0 {
+				compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
+				reg = <0 0 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+				assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
+						  <&topckgen CLK_TOP_SSUSB_XHCI>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+							 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+				clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
+					 <&topckgen CLK_TOP_SSUSB_REF>,
+					 <&apmixedsys CLK_APMIXED_USB1PLL>,
+					 <&clk26m>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>;
+				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+				status = "disabled";
+			};
 		};
 
 		mmc0: mmc@11230000 {
@@ -610,6 +1430,42 @@
 			status = "disabled";
 		};
 
+		ufshci: ufshci@11270000 {
+			compatible = "mediatek,mt8195-ufshci";
+			reg = <0 0x11270000 0 0x2300>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&ufsphy>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_AES_UFSFDE>,
+				 <&infracfg_ao CLK_INFRA_AO_AES>,
+				 <&infracfg_ao CLK_INFRA_AO_UFS_TICK>,
+				 <&infracfg_ao CLK_INFRA_AO_UNIPRO_SYS>,
+				 <&infracfg_ao CLK_INFRA_AO_UNIPRO_TICK>,
+				 <&infracfg_ao CLK_INFRA_AO_UFS_MP_SAP_B>,
+				 <&infracfg_ao CLK_INFRA_AO_UFS_TX_SYMBOL>,
+				 <&infracfg_ao CLK_INFRA_AO_PERI_UFS_MEM_SUB>;
+			clock-names = "ufs", "ufs_aes", "ufs_tick",
+					"unipro_sysclk", "unipro_tick",
+					"unipro_mp_bclk", "ufs_tx_symbol",
+					"ufs_mem_sub";
+			freq-table-hz = <0 0>, <0 0>, <0 0>,
+					<0 0>, <0 0>, <0 0>,
+					<0 0>, <0 0>;
+
+			mediatek,ufs-disable-mcq;
+			status = "disabled";
+		};
+
+		lvts_mcu: thermal-sensor@11278000 {
+			compatible = "mediatek,mt8195-lvts-mcu";
+			reg = <0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+			nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+			nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
+			#thermal-sensor-cells = <1>;
+		};
+
 		xhci1: usb@11290000 {
 			compatible = "mediatek,mt8195-xhci",
 				     "mediatek,mtk-xhci";
@@ -617,7 +1473,7 @@
 			      <0 0x11293e00 0 0x0100>;
 			reg-names = "mac", "ippc";
 			interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH 0>;
-			phys = <&u2port1 PHY_TYPE_USB2>;
+			phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
 			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_1P>,
 					  <&topckgen CLK_TOP_SSUSB_XHCI_1P>;
 			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
@@ -625,53 +1481,175 @@
 			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_1P_BUS>,
 				 <&topckgen CLK_TOP_SSUSB_P1_REF>,
 				 <&apmixedsys CLK_APMIXED_USB1PLL>,
+				 <&clk26m>,
 				 <&pericfg_ao CLK_PERI_AO_SSUSB_1P_XHCI>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck","xhci_ck";
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
+				      "xhci_ck";
 			mediatek,syscon-wakeup = <&pericfg 0x400 104>;
 			wakeup-source;
 			status = "disabled";
 		};
 
-		xhci2: usb@112a0000 {
-			compatible = "mediatek,mt8195-xhci",
-				     "mediatek,mtk-xhci";
-			reg = <0 0x112a0000 0 0x1000>,
-			      <0 0x112a3e00 0 0x0100>;
+		ssusb2: usb@112a1000 {
+			compatible = "mediatek,mt8195-mtu3", "mediatek,mtu3";
+			reg = <0 0x112a1000 0 0x2dff>, <0 0x112a3e00 0 0x0100>;
 			reg-names = "mac", "ippc";
-			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
-			phys = <&u2port2 PHY_TYPE_USB2>;
-			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>,
-					  <&topckgen CLK_TOP_SSUSB_XHCI_2P>;
-			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
-						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			ranges = <0 0 0 0x112a0000 0 0x3f00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
 			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
 				 <&topckgen CLK_TOP_SSUSB_P2_REF>,
 				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
-			clock-names = "sys_ck", "ref_ck", "xhci_ck";
-			mediatek,syscon-wakeup = <&pericfg 0x400 105>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			phys = <&u2port2 PHY_TYPE_USB2>;
 			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x400 105>;
 			status = "disabled";
+
+			xhci2: usb@0 {
+				compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
+				reg = <0 0 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+				assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_2P>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+				clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
+				clock-names = "sys_ck";
+				status = "disabled";
+			};
 		};
 
-		xhci3: usb@112b0000 {
-			compatible = "mediatek,mt8195-xhci",
-				     "mediatek,mtk-xhci";
-			reg = <0 0x112b0000 0 0x1000>,
-			      <0 0x112b3e00 0 0x0100>;
+		ssusb3: usb@112b1000 {
+			compatible = "mediatek,mt8195-mtu3", "mediatek,mtu3";
+			reg = <0 0x112b1000 0 0x2dff>, <0 0x112b3e00 0 0x0100>;
 			reg-names = "mac", "ippc";
-			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
-			phys = <&u2port3 PHY_TYPE_USB2>;
-			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>,
-					  <&topckgen CLK_TOP_SSUSB_XHCI_3P>;
-			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
-						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			ranges = <0 0 0 0x112b0000 0 0x3f00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
 			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
 				 <&topckgen CLK_TOP_SSUSB_P3_REF>,
 				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
-			clock-names = "sys_ck", "ref_ck", "xhci_ck";
-			mediatek,syscon-wakeup = <&pericfg 0x400 106>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			phys = <&u2port3 PHY_TYPE_USB2>;
 			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x400 106>;
+			status = "disabled";
+
+			xhci3: usb@0 {
+				compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
+				reg = <0 0 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+				assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_3P>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+				clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
+				clock-names = "sys_ck";
+				status = "disabled";
+			};
+		};
+
+		pcie0: pcie@112f0000 {
+			compatible = "mediatek,mt8195-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x112f0000 0 0x4000>;
+			reg-names = "pcie-mac";
+			interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH 0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x20000000
+				  0x0 0x20000000 0 0x200000>,
+				 <0x82000000 0 0x20200000
+				  0x0 0x20200000 0 0x3e00000>;
+
+			iommu-map = <0 &iommu_infra IOMMU_PORT_INFRA_PCIE0 0x2>;
+			iommu-map-mask = <0x0>;
+
+			clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P0>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_26M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_96M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_32K>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_PERI_26M>,
+				 <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m",
+				      "tl_32k", "peri_26m", "peri_mem";
+			assigned-clocks = <&topckgen CLK_TOP_TL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4_D4>;
+
+			phys = <&pciephy>;
+			phy-names = "pcie-phy";
+
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P0>;
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
 			status = "disabled";
+
+			pcie_intc0: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		pcie1: pcie@112f8000 {
+			compatible = "mediatek,mt8195-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x112f8000 0 0x4000>;
+			reg-names = "pcie-mac";
+			interrupts = <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH 0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x24000000
+				  0x0 0x24000000 0 0x200000>,
+				 <0x82000000 0 0x24200000
+				  0x0 0x24200000 0 0x3e00000>;
+
+			iommu-map = <0 &iommu_infra IOMMU_PORT_INFRA_PCIE1 0x2>;
+			iommu-map-mask = <0x0>;
+
+			clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P1>,
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_P1_TL_96M>,
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_P1_PERI_26M>,
+				 /* Designer has connect pcie1 with peri_mem_p0 clock */
+				 <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m",
+				      "tl_32k", "peri_26m", "peri_mem";
+			assigned-clocks = <&topckgen CLK_TOP_TL_P1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4_D4>;
+
+			phys = <&u3port1 PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P1>;
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			status = "disabled";
+
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
 		};
 
 		nor_flash: spi@1132c000 {
@@ -733,6 +1711,49 @@
 				reg = <0x189 0x2>;
 				bits = <7 5>;
 			};
+			pciephy_rx_ln1: pciephy-rx-ln1@190,1 {
+				reg = <0x190 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_tx_ln1_nmos: pciephy-tx-ln1-nmos@190,2 {
+				reg = <0x190 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_tx_ln1_pmos: pciephy-tx-ln1-pmos@191,1 {
+				reg = <0x191 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_rx_ln0: pciephy-rx-ln0@191,2 {
+				reg = <0x191 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_tx_ln0_nmos: pciephy-tx-ln0-nmos@192,1 {
+				reg = <0x192 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_tx_ln0_pmos: pciephy-tx-ln0-pmos@192,2 {
+				reg = <0x192 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_glb_intr: pciephy-glb-intr@193 {
+				reg = <0x193 0x1>;
+				bits = <0 4>;
+			};
+			dp_calibration: dp-data@1ac {
+				reg = <0x1ac 0x10>;
+			};
+			lvts_efuse_data1: lvts1-calib@1bc {
+				reg = <0x1bc 0x14>;
+			};
+			lvts_efuse_data2: lvts2-calib@1d0 {
+				reg = <0x1d0 0x38>;
+			};
+			svs_calib_data: svs-calib@580 {
+				reg = <0x580 0x64>;
+			};
+			socinfo-data1@7a0 {
+				reg = <0x7a0 0x4>;
+			};
 		};
 
 		u3phy2: t-phy@11c40000 {
@@ -765,6 +1786,26 @@
 			};
 		};
 
+		mipi_tx0: dsi-phy@11c80000 {
+			compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c80000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		mipi_tx1: dsi-phy@11c90000 {
+			compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c90000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx1_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		i2c5: i2c@11d00000 {
 			compatible = "mediatek,mt8195-i2c",
 				     "mediatek,mt8192-i2c";
@@ -828,7 +1869,7 @@
 			clock-names = "main", "dma";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "okay";
+			status = "disabled";
 		};
 
 		i2c1: i2c@11e01000 {
@@ -902,6 +1943,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0 0x11e30000 0xe00>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
 			status = "disabled";
 
 			u2port1: usb-phy@0 {
@@ -953,6 +1995,23 @@
 			};
 		};
 
+		pciephy: phy@11e80000 {
+			compatible = "mediatek,mt8195-pcie-phy";
+			reg = <0 0x11e80000 0 0x10000>;
+			reg-names = "sif";
+			nvmem-cells = <&pciephy_glb_intr>, <&pciephy_tx_ln0_pmos>,
+				      <&pciephy_tx_ln0_nmos>, <&pciephy_rx_ln0>,
+				      <&pciephy_tx_ln1_pmos>, <&pciephy_tx_ln1_nmos>,
+				      <&pciephy_rx_ln1>;
+			nvmem-cell-names = "glb_intr", "tx_ln0_pmos",
+					   "tx_ln0_nmos", "rx_ln0",
+					   "tx_ln1_pmos", "tx_ln1_nmos",
+					   "rx_ln1";
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_PHY>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		ufsphy: ufs-phy@11fa0000 {
 			compatible = "mediatek,mt8195-ufsphy", "mediatek,mt8183-ufsphy";
 			reg = <0 0x11fa0000 0 0xc000>;
@@ -962,12 +2021,216 @@
 			status = "disabled";
 		};
 
+		gpu: gpu@13000000 {
+			compatible = "mediatek,mt8195-mali", "mediatek,mt8192-mali",
+				     "arm,mali-valhall-jm";
+			reg = <0 0x13000000 0 0x4000>;
+
+			clocks = <&mfgcfg CLK_MFG_BG3D>;
+			interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "job", "mmu", "gpu";
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_MFG2>,
+					<&spm MT8195_POWER_DOMAIN_MFG3>,
+					<&spm MT8195_POWER_DOMAIN_MFG4>,
+					<&spm MT8195_POWER_DOMAIN_MFG5>,
+					<&spm MT8195_POWER_DOMAIN_MFG6>;
+			power-domain-names = "core0", "core1", "core2", "core3", "core4";
+			status = "disabled";
+		};
+
 		mfgcfg: clock-controller@13fbf000 {
 			compatible = "mediatek,mt8195-mfgcfg";
 			reg = <0 0x13fbf000 0 0x1000>;
 			#clock-cells = <1>;
 		};
 
+		vppsys0: syscon@14000000 {
+			compatible = "mediatek,mt8195-vppsys0", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0 0x1000>;
+		};
+
+		dma-controller@14001000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14001000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RDMA_FRAME_DONE>;
+			mediatek,scp = <&scp>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+			iommus = <&iommu_vpp M4U_PORT_L4_MDP_RDMA>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RDMA>;
+			mboxes = <&gce1 12 CMDQ_THR_PRIO_1>,
+				 <&gce1 13 CMDQ_THR_PRIO_1>,
+				 <&gce1 14 CMDQ_THR_PRIO_1>,
+				 <&gce1 21 CMDQ_THR_PRIO_1>,
+				 <&gce1 22 CMDQ_THR_PRIO_1>;
+			#dma-cells = <1>;
+		};
+
+		display@14002000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14002000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_FG>;
+		};
+
+		display@14003000 {
+			compatible = "mediatek,mt8195-mdp3-stitch";
+			reg = <0 0x14003000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x3000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_STITCH>;
+		};
+
+		display@14004000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14004000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_HDR>;
+		};
+
+		display@14005000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14005000 0 0x1000>;
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x5000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		display@14006000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14006000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RSZ_IN_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RSZ>;
+		};
+
+		display@14007000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14007000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>;
+		};
+
+		display@14008000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14008000 0 0x1000>;
+			interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x8000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		display@14009000 {
+			compatible = "mediatek,mt8195-mdp3-ovl";
+			reg = <0 0x14009000 0 0x1000>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x9000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_OVL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+			iommus = <&iommu_vpp M4U_PORT_L4_MDP_OVL>;
+		};
+
+		display@1400a000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x1400a000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xa000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_PADDING>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		display@1400b000 {
+			compatible = "mediatek,mt8195-mdp3-tcc";
+			reg = <0 0x1400b000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TCC>;
+		};
+
+		dma-controller@1400c000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x1400c000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xc000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_WROT_VIDO_WDONE>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_WROT>;
+			iommus = <&iommu_vpp M4U_PORT_L4_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+			#dma-cells = <1>;
+		};
+
+		mutex@1400f000 {
+			compatible = "mediatek,mt8195-vpp-mutex";
+			reg = <0 0x1400f000 0 0x1000>;
+			interrupts = <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xf000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MUTEX>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		smi_sub_common_vpp0_vpp1_2x1: smi@14010000 {
+			compatible = "mediatek,mt8195-smi-sub-common";
+			reg = <0 0x14010000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>,
+			       <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>,
+			       <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>;
+			clock-names = "apb", "smi", "gals0";
+			mediatek,smi = <&smi_common_vpp>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		smi_sub_common_vdec_vpp0_2x1: smi@14011000 {
+			compatible = "mediatek,mt8195-smi-sub-common";
+			reg = <0 0x14011000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>,
+				 <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>,
+				 <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>;
+			clock-names = "apb", "smi", "gals0";
+			mediatek,smi = <&smi_common_vpp>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		smi_common_vpp: smi@14012000 {
+			compatible = "mediatek,mt8195-smi-common-vpp";
+			reg = <0 0x14012000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>,
+			       <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>,
+			       <&vppsys0 CLK_VPP0_SMI_RSI>,
+			       <&vppsys0 CLK_VPP0_SMI_RSI>;
+			clock-names = "apb", "smi", "gals0", "gals1";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		larb4: larb@14013000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x14013000 0 0x1000>;
+			mediatek,larb-id = <4>;
+			mediatek,smi = <&smi_sub_common_vpp0_vpp1_2x1>;
+			clocks = <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>,
+			       <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		iommu_vpp: iommu@14018000 {
+			compatible = "mediatek,mt8195-iommu-vpp";
+			reg = <0 0x14018000 0 0x1000>;
+			mediatek,larbs = <&larb1 &larb3 &larb4 &larb6 &larb8
+					  &larb12 &larb14 &larb16 &larb18
+					  &larb20 &larb22 &larb23 &larb26
+					  &larb27>;
+			interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_SMI_IOMMU>;
+			clock-names = "bclk";
+			#iommu-cells = <1>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
 		wpesys: clock-controller@14e00000 {
 			compatible = "mediatek,mt8195-wpesys";
 			reg = <0 0x14e00000 0 0x1000>;
@@ -986,18 +2249,409 @@
 			#clock-cells = <1>;
 		};
 
+		larb7: larb@14e04000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x14e04000 0 0x1000>;
+			mediatek,larb-id = <7>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&wpesys CLK_WPE_SMI_LARB7>,
+				 <&wpesys CLK_WPE_SMI_LARB7>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_WPESYS>;
+		};
+
+		larb8: larb@14e05000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x14e05000 0 0x1000>;
+			mediatek,larb-id = <8>;
+			mediatek,smi = <&smi_common_vpp>;
+			clocks = <&wpesys CLK_WPE_SMI_LARB8>,
+			       <&wpesys CLK_WPE_SMI_LARB8>,
+			       <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_WPESYS>;
+		};
+
+		vppsys1: syscon@14f00000 {
+			compatible = "mediatek,mt8195-vppsys1", "syscon";
+			reg = <0 0x14f00000 0 0x1000>;
+			#clock-cells = <1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0 0x1000>;
+		};
+
+		mutex@14f01000 {
+			compatible = "mediatek,mt8195-vpp-mutex";
+			reg = <0 0x14f01000 0 0x1000>;
+			interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x1000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_DISP_MUTEX>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		larb5: larb@14f02000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x14f02000 0 0x1000>;
+			mediatek,larb-id = <5>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&vppsys1 CLK_VPP1_VPPSYS1_LARB>,
+			       <&vppsys1 CLK_VPP1_VPPSYS1_GALS>,
+			       <&vppsys0 CLK_VPP0_GALS_VPP1_LARB5>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		larb6: larb@14f03000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x14f03000 0 0x1000>;
+			mediatek,larb-id = <6>;
+			mediatek,smi = <&smi_sub_common_vpp0_vpp1_2x1>;
+			clocks = <&vppsys1 CLK_VPP1_VPPSYS1_LARB>,
+			       <&vppsys1 CLK_VPP1_VPPSYS1_GALS>,
+			       <&vppsys0 CLK_VPP0_GALS_VPP1_LARB6>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f06000 {
+			compatible = "mediatek,mt8195-mdp3-split";
+			reg = <0 0x14f06000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x6000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_VPP_SPLIT>,
+				 <&vppsys1 CLK_VPP1_HDMI_META>,
+				 <&vppsys1 CLK_VPP1_VPP_SPLIT_HDMI>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f07000 {
+			compatible = "mediatek,mt8195-mdp3-tcc";
+			reg = <0 0x14f07000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x7000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_TCC>;
+		};
+
+		dma-controller@14f08000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14f08000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x8000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RDMA>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_RDMA>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f09000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14f09000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x9000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RDMA>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_RDMA>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f0a000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14f0a000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xa000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RDMA>;
+			iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_RDMA>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		display@14f0b000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0b000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xb000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_FG>;
+		};
+
+		display@14f0c000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0c000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xc000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_FG>;
+		};
+
+		display@14f0d000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0d000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xd000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_FG>;
+		};
+
+		display@14f0e000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f0e000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xe000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_HDR>;
+		};
+
+		display@14f0f000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f0f000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xf000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_HDR>;
+		};
+
+		display@14f10000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f10000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_HDR>;
+		};
+
+		display@14f11000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f11000 0 0x1000>;
+			interrupts = <GIC_SPI 617 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x1000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f12000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f12000 0 0x1000>;
+			interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x2000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f13000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f13000 0 0x1000>;
+			interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x3000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f14000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f14000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RSZ>;
+		};
+
+		display@14f15000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f15000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RSZ>;
+		};
+
+		display@14f16000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f16000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RSZ>;
+		};
+
+		display@14f17000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f17000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x7000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_TDSHP>;
+		};
+
+		display@14f18000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f18000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x8000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_TDSHP>;
+		};
+
+		display@14f19000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f19000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x9000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_TDSHP>;
+		};
+
+		display@14f1a000 {
+			compatible = "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1a000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xa000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_MERGE>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1b000 {
+			compatible = "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1b000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xb000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_MERGE>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1c000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1c000 0 0x1000>;
+			interrupts = <GIC_SPI 628 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xc000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1d000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1d000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xd000 0x1000>;
+			interrupts = <GIC_SPI 629 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1e000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1e000 0 0x1000>;
+			interrupts = <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xe000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1f000 {
+			compatible = "mediatek,mt8195-mdp3-ovl";
+			reg = <0 0x14f1f000 0 0x1000>;
+			interrupts = <GIC_SPI 631 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xf000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_OVL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_OVL>;
+		};
+
+		display@14f20000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f20000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_VPP_PAD>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f21000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f21000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x1000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_PAD>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f22000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f22000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x2000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_PAD>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		dma-controller@14f23000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f23000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x3000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_WROT>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f24000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f24000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_SOF>,
+					<CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_WROT>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f25000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f25000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_SOF>,
+					<CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_WROT>;
+			iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
 		imgsys: clock-controller@15000000 {
 			compatible = "mediatek,mt8195-imgsys";
 			reg = <0 0x15000000 0 0x1000>;
 			#clock-cells = <1>;
 		};
 
+		larb9: larb@15001000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x15001000 0 0x1000>;
+			mediatek,larb-id = <9>;
+			mediatek,smi = <&smi_sub_common_img1_3x1>;
+			clocks = <&imgsys CLK_IMG_LARB9>,
+				 <&imgsys CLK_IMG_LARB9>,
+				 <&imgsys CLK_IMG_GALS>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_IMG>;
+		};
+
+		smi_sub_common_img0_3x1: smi@15002000 {
+			compatible = "mediatek,mt8195-smi-sub-common";
+			reg = <0 0x15002000 0 0x1000>;
+			clocks = <&imgsys CLK_IMG_IPE>,
+				 <&imgsys CLK_IMG_IPE>,
+				 <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>;
+			clock-names = "apb", "smi", "gals0";
+			mediatek,smi = <&smi_common_vpp>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_IMG>;
+		};
+
+		smi_sub_common_img1_3x1: smi@15003000 {
+			compatible = "mediatek,mt8195-smi-sub-common";
+			reg = <0 0x15003000 0 0x1000>;
+			clocks = <&imgsys CLK_IMG_LARB9>,
+				 <&imgsys CLK_IMG_LARB9>,
+				 <&imgsys CLK_IMG_GALS>;
+			clock-names = "apb", "smi", "gals0";
+			mediatek,smi = <&smi_common_vdo>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_IMG>;
+		};
+
 		imgsys1_dip_top: clock-controller@15110000 {
 			compatible = "mediatek,mt8195-imgsys1_dip_top";
 			reg = <0 0x15110000 0 0x1000>;
 			#clock-cells = <1>;
 		};
 
+		larb10: larb@15120000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x15120000 0 0x1000>;
+			mediatek,larb-id = <10>;
+			mediatek,smi = <&smi_sub_common_img1_3x1>;
+			clocks = <&imgsys CLK_IMG_DIP0>,
+			       <&imgsys1_dip_top CLK_IMG1_DIP_TOP_LARB10>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_DIP>;
+		};
+
 		imgsys1_dip_nr: clock-controller@15130000 {
 			compatible = "mediatek,mt8195-imgsys1_dip_nr";
 			reg = <0 0x15130000 0 0x1000>;
@@ -1010,18 +2664,129 @@
 			#clock-cells = <1>;
 		};
 
+		larb11: larb@15230000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x15230000 0 0x1000>;
+			mediatek,larb-id = <11>;
+			mediatek,smi = <&smi_sub_common_img1_3x1>;
+			clocks = <&imgsys CLK_IMG_WPE0>,
+			       <&imgsys1_wpe CLK_IMG1_WPE_LARB11>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_DIP>;
+		};
+
 		ipesys: clock-controller@15330000 {
 			compatible = "mediatek,mt8195-ipesys";
 			reg = <0 0x15330000 0 0x1000>;
 			#clock-cells = <1>;
 		};
 
+		larb12: larb@15340000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x15340000 0 0x1000>;
+			mediatek,larb-id = <12>;
+			mediatek,smi = <&smi_sub_common_img0_3x1>;
+			clocks = <&ipesys CLK_IPE_SMI_LARB12>,
+				 <&ipesys CLK_IPE_SMI_LARB12>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_IPE>;
+		};
+
 		camsys: clock-controller@16000000 {
 			compatible = "mediatek,mt8195-camsys";
 			reg = <0 0x16000000 0 0x1000>;
 			#clock-cells = <1>;
 		};
 
+		larb13: larb@16001000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16001000 0 0x1000>;
+			mediatek,larb-id = <13>;
+			mediatek,smi = <&smi_sub_common_cam_4x1>;
+			clocks = <&camsys CLK_CAM_LARB13>,
+			       <&camsys CLK_CAM_LARB13>,
+			       <&camsys CLK_CAM_CAM2MM0_GALS>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM>;
+		};
+
+		larb14: larb@16002000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16002000 0 0x1000>;
+			mediatek,larb-id = <14>;
+			mediatek,smi = <&smi_sub_common_cam_7x1>;
+			clocks = <&camsys CLK_CAM_LARB14>,
+				 <&camsys CLK_CAM_LARB14>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM>;
+		};
+
+		smi_sub_common_cam_4x1: smi@16004000 {
+			compatible = "mediatek,mt8195-smi-sub-common";
+			reg = <0 0x16004000 0 0x1000>;
+			clocks = <&camsys CLK_CAM_LARB13>,
+				 <&camsys CLK_CAM_LARB13>,
+				 <&camsys CLK_CAM_CAM2MM0_GALS>;
+			clock-names = "apb", "smi", "gals0";
+			mediatek,smi = <&smi_common_vdo>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM>;
+		};
+
+		smi_sub_common_cam_7x1: smi@16005000 {
+			compatible = "mediatek,mt8195-smi-sub-common";
+			reg = <0 0x16005000 0 0x1000>;
+			clocks = <&camsys CLK_CAM_LARB14>,
+				 <&camsys CLK_CAM_CAM2MM1_GALS>,
+				 <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>;
+			clock-names = "apb", "smi", "gals0";
+			mediatek,smi = <&smi_common_vpp>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM>;
+		};
+
+		larb16: larb@16012000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16012000 0 0x1000>;
+			mediatek,larb-id = <16>;
+			mediatek,smi = <&smi_sub_common_cam_7x1>;
+			clocks = <&camsys_rawa CLK_CAM_RAWA_LARBX>,
+				 <&camsys_rawa CLK_CAM_RAWA_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWA>;
+		};
+
+		larb17: larb@16013000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16013000 0 0x1000>;
+			mediatek,larb-id = <17>;
+			mediatek,smi = <&smi_sub_common_cam_4x1>;
+			clocks = <&camsys_yuva CLK_CAM_YUVA_LARBX>,
+				 <&camsys_yuva CLK_CAM_YUVA_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWA>;
+		};
+
+		larb27: larb@16014000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16014000 0 0x1000>;
+			mediatek,larb-id = <27>;
+			mediatek,smi = <&smi_sub_common_cam_7x1>;
+			clocks = <&camsys_rawb CLK_CAM_RAWB_LARBX>,
+				 <&camsys_rawb CLK_CAM_RAWB_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWB>;
+		};
+
+		larb28: larb@16015000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16015000 0 0x1000>;
+			mediatek,larb-id = <28>;
+			mediatek,smi = <&smi_sub_common_cam_4x1>;
+			clocks = <&camsys_yuvb CLK_CAM_YUVB_LARBX>,
+				 <&camsys_yuvb CLK_CAM_YUVB_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWB>;
+		};
+
 		camsys_rawa: clock-controller@1604f000 {
 			compatible = "mediatek,mt8195-camsys_rawa";
 			reg = <0 0x1604f000 0 0x1000>;
@@ -1052,24 +2817,173 @@
 			#clock-cells = <1>;
 		};
 
+		larb25: larb@16141000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16141000 0 0x1000>;
+			mediatek,larb-id = <25>;
+			mediatek,smi = <&smi_sub_common_cam_4x1>;
+			clocks = <&camsys CLK_CAM_LARB13>,
+				 <&camsys_mraw CLK_CAM_MRAW_LARBX>,
+				 <&camsys CLK_CAM_CAM2MM0_GALS>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM_MRAW>;
+		};
+
+		larb26: larb@16142000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16142000 0 0x1000>;
+			mediatek,larb-id = <26>;
+			mediatek,smi = <&smi_sub_common_cam_7x1>;
+			clocks = <&camsys_mraw CLK_CAM_MRAW_LARBX>,
+				 <&camsys_mraw CLK_CAM_MRAW_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM_MRAW>;
+
+		};
+
 		ccusys: clock-controller@17200000 {
 			compatible = "mediatek,mt8195-ccusys";
 			reg = <0 0x17200000 0 0x1000>;
 			#clock-cells = <1>;
 		};
 
+		larb18: larb@17201000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x17201000 0 0x1000>;
+			mediatek,larb-id = <18>;
+			mediatek,smi = <&smi_sub_common_cam_7x1>;
+			clocks = <&ccusys CLK_CCU_LARB18>,
+				 <&ccusys CLK_CCU_LARB18>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM>;
+		};
+
+		video-codec@18000000 {
+			compatible = "mediatek,mt8195-vcodec-dec";
+			mediatek,scp = <&scp>;
+			iommus = <&iommu_vdo M4U_PORT_L21_VDEC_MC_EXT>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			reg = <0 0x18000000 0 0x1000>,
+			      <0 0x18004000 0 0x1000>;
+			ranges = <0 0 0 0x18000000 0 0x26000>;
+
+			video-codec@2000 {
+				compatible = "mediatek,mtk-vcodec-lat-soc";
+				reg = <0 0x2000 0 0x800>;
+				iommus = <&iommu_vpp M4U_PORT_L23_VDEC_UFO_ENC_EXT>,
+					 <&iommu_vpp M4U_PORT_L23_VDEC_RDMA_EXT>;
+				clocks = <&topckgen CLK_TOP_VDEC>,
+					 <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+					 <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+					 <&topckgen CLK_TOP_UNIVPLL_D4>;
+				clock-names = "sel", "vdec", "lat", "top";
+				assigned-clocks = <&topckgen CLK_TOP_VDEC>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+			};
+
+			video-codec@10000 {
+				compatible = "mediatek,mtk-vcodec-lat";
+				reg = <0 0x10000 0 0x800>;
+				interrupts = <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_VLD_EXT>,
+					 <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_VLD2_EXT>,
+					 <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_AVC_MC_EXT>,
+					 <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_PRED_RD_EXT>,
+					 <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_TILE_EXT>,
+					 <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_WDMA_EXT>;
+				clocks = <&topckgen CLK_TOP_VDEC>,
+					 <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+					 <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+					 <&topckgen CLK_TOP_UNIVPLL_D4>;
+				clock-names = "sel", "vdec", "lat", "top";
+				assigned-clocks = <&topckgen CLK_TOP_VDEC>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+			};
+
+			video-codec@25000 {
+				compatible = "mediatek,mtk-vcodec-core";
+				reg = <0 0x25000 0 0x1000>;		/* VDEC_CORE_MISC */
+				interrupts = <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&iommu_vdo M4U_PORT_L21_VDEC_MC_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_UFO_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_PP_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_PRED_RD_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_PRED_WR_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_PPWRAP_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_TILE_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_VLD_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_VLD2_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_AVC_MV_EXT>;
+				clocks = <&topckgen CLK_TOP_VDEC>,
+					 <&vdecsys CLK_VDEC_VDEC>,
+					 <&vdecsys CLK_VDEC_LAT>,
+					 <&topckgen CLK_TOP_UNIVPLL_D4>;
+				clock-names = "sel", "vdec", "lat", "top";
+				assigned-clocks = <&topckgen CLK_TOP_VDEC>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+			};
+		};
+
+		larb24: larb@1800d000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1800d000 0 0x1000>;
+			mediatek,larb-id = <24>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
+				 <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+		};
+
+		larb23: larb@1800e000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1800e000 0 0x1000>;
+			mediatek,larb-id = <23>;
+			mediatek,smi = <&smi_sub_common_vdec_vpp0_2x1>;
+			clocks = <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>,
+				 <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+		};
+
 		vdecsys_soc: clock-controller@1800f000 {
 			compatible = "mediatek,mt8195-vdecsys_soc";
 			reg = <0 0x1800f000 0 0x1000>;
 			#clock-cells = <1>;
 		};
 
+		larb21: larb@1802e000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1802e000 0 0x1000>;
+			mediatek,larb-id = <21>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&vdecsys CLK_VDEC_LARB1>,
+				 <&vdecsys CLK_VDEC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+		};
+
 		vdecsys: clock-controller@1802f000 {
 			compatible = "mediatek,mt8195-vdecsys";
 			reg = <0 0x1802f000 0 0x1000>;
 			#clock-cells = <1>;
 		};
 
+		larb22: larb@1803e000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1803e000 0 0x1000>;
+			mediatek,larb-id = <22>;
+			mediatek,smi = <&smi_sub_common_vdec_vpp0_2x1>;
+			clocks = <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>,
+				 <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDEC2>;
+		};
+
 		vdecsys_core1: clock-controller@1803f000 {
 			compatible = "mediatek,mt8195-vdecsys_core1";
 			reg = <0 0x1803f000 0 0x1000>;
@@ -1088,10 +3002,1176 @@
 			#clock-cells = <1>;
 		};
 
+		larb19: larb@1a010000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1a010000 0 0x1000>;
+			mediatek,larb-id = <19>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&vencsys CLK_VENC_VENC>,
+				 <&vencsys CLK_VENC_GALS>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
+		};
+
+		venc: video-codec@1a020000 {
+			compatible = "mediatek,mt8195-vcodec-enc";
+			reg = <0 0x1a020000 0 0x10000>;
+			iommus = <&iommu_vdo M4U_PORT_L19_VENC_RCPU>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_REC>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_BSDMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_SV_COMV>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_RD_COMV>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_CUR_LUMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_CUR_CHROMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_REF_LUMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_REF_CHROMA>;
+			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,scp = <&scp>;
+			clocks = <&vencsys CLK_VENC_VENC>;
+			clock-names = "venc_sel";
+			assigned-clocks = <&topckgen CLK_TOP_VENC>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+		};
+
+		jpeg-decoder@1a040000 {
+			compatible = "mediatek,mt8195-jpgdec";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+			iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
+				 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
+				 <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
+				 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
+				 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+				 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0 0 0 0x1a040000 0 0x20000>,
+				 <1 0 0 0x1b040000 0 0x10000>;
+
+			jpgdec@0,0 {
+				compatible = "mediatek,mt8195-jpgdec-hw";
+				reg = <0 0 0 0x10000>;/* JPGDEC_C0 */
+				iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+				interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&vencsys CLK_VENC_JPGDEC>;
+				clock-names = "jpgdec";
+				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+			};
+
+			jpgdec@0,10000 {
+				compatible = "mediatek,mt8195-jpgdec-hw";
+				reg = <0 0 0x10000 0x10000>;/* JPGDEC_C1 */
+				iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&vencsys CLK_VENC_JPGDEC_C1>;
+				clock-names = "jpgdec";
+				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+			};
+
+			jpgdec@1,0 {
+				compatible = "mediatek,mt8195-jpgdec-hw";
+				reg = <1 0 0 0x10000>;/* JPGDEC_C2 */
+				iommus = <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA0>,
+					 <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA0>,
+					 <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA1>,
+					 <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA1>,
+					 <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET1>,
+					 <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET0>;
+				interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGDEC>;
+				clock-names = "jpgdec";
+				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC2>;
+			};
+		};
+
 		vencsys_core1: clock-controller@1b000000 {
 			compatible = "mediatek,mt8195-vencsys_core1";
 			reg = <0 0x1b000000 0 0x1000>;
 			#clock-cells = <1>;
 		};
+
+		vdosys0: syscon@1c01a000 {
+			compatible = "mediatek,mt8195-vdosys0", "mediatek,mt8195-mmsys", "syscon";
+			reg = <0 0x1c01a000 0 0x1000>;
+			mboxes = <&gce0 0 CMDQ_THR_PRIO_4>;
+			#clock-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xa000 0x1000>;
+		};
+
+
+		jpeg-encoder@1a030000 {
+			compatible = "mediatek,mt8195-jpgenc";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
+			iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
+					<&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
+					<&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
+					<&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0 0 0 0x1a030000 0 0x10000>,
+				 <1 0 0 0x1b030000 0 0x10000>;
+
+			jpgenc@0,0 {
+				compatible = "mediatek,mt8195-jpgenc-hw";
+				reg = <0 0 0 0x10000>;
+				iommus = <&iommu_vdo M4U_PORT_L19_JPGENC_Y_RDMA>,
+						<&iommu_vdo M4U_PORT_L19_JPGENC_C_RDMA>,
+						<&iommu_vdo M4U_PORT_L19_JPGENC_Q_TABLE>,
+						<&iommu_vdo M4U_PORT_L19_JPGENC_BSDMA>;
+				interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&vencsys CLK_VENC_JPGENC>;
+				clock-names = "jpgenc";
+				power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
+			};
+
+			jpgenc@1,0 {
+				compatible = "mediatek,mt8195-jpgenc-hw";
+				reg = <1 0 0 0x10000>;
+				iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
+						<&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
+						<&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
+						<&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
+				interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGENC>;
+				clock-names = "jpgenc";
+				power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
+			};
+		};
+
+		larb20: larb@1b010000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1b010000 0 0x1000>;
+			mediatek,larb-id = <20>;
+			mediatek,smi = <&smi_common_vpp>;
+			clocks = <&vencsys_core1 CLK_VENC_CORE1_VENC>,
+				 <&vencsys_core1 CLK_VENC_CORE1_GALS>,
+				 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
+		};
+
+		ovl0: ovl@1c000000 {
+			compatible = "mediatek,mt8195-disp-ovl";
+			reg = <0 0x1c000000 0 0x1000>;
+			interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_OVL0>;
+			iommus = <&iommu_vdo M4U_PORT_L0_DISP_OVL0_RDMA0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x0000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ovl0_in: endpoint { };
+				};
+
+				port@1 {
+					reg = <1>;
+					ovl0_out: endpoint {
+						remote-endpoint = <&rdma0_in>;
+					};
+				};
+			};
+		};
+
+		rdma0: rdma@1c002000 {
+			compatible = "mediatek,mt8195-disp-rdma";
+			reg = <0 0x1c002000 0 0x1000>;
+			interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_RDMA0>;
+			iommus = <&iommu_vdo M4U_PORT_L0_DISP_RDMA0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x2000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					rdma0_in: endpoint {
+						remote-endpoint = <&ovl0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					rdma0_out: endpoint {
+						remote-endpoint = <&color0_in>;
+					};
+				};
+			};
+		};
+
+		color0: color@1c003000 {
+			compatible = "mediatek,mt8195-disp-color", "mediatek,mt8173-disp-color";
+			reg = <0 0x1c003000 0 0x1000>;
+			interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_COLOR0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x3000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					color0_in: endpoint {
+						remote-endpoint = <&rdma0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					color0_out: endpoint {
+						remote-endpoint = <&ccorr0_in>;
+					};
+				};
+			};
+		};
+
+		ccorr0: ccorr@1c004000 {
+			compatible = "mediatek,mt8195-disp-ccorr", "mediatek,mt8192-disp-ccorr";
+			reg = <0 0x1c004000 0 0x1000>;
+			interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_CCORR0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x4000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ccorr0_in: endpoint {
+						remote-endpoint = <&color0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ccorr0_out: endpoint {
+						remote-endpoint = <&aal0_in>;
+					};
+				};
+			};
+		};
+
+		aal0: aal@1c005000 {
+			compatible = "mediatek,mt8195-disp-aal", "mediatek,mt8183-disp-aal";
+			reg = <0 0x1c005000 0 0x1000>;
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_AAL0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x5000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					aal0_in: endpoint {
+						remote-endpoint = <&ccorr0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					aal0_out: endpoint {
+						remote-endpoint = <&gamma0_in>;
+					};
+				};
+			};
+		};
+
+		gamma0: gamma@1c006000 {
+			compatible = "mediatek,mt8195-disp-gamma", "mediatek,mt8183-disp-gamma";
+			reg = <0 0x1c006000 0 0x1000>;
+			interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_GAMMA0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x6000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					gamma0_in: endpoint {
+						remote-endpoint = <&aal0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					gamma0_out: endpoint {
+						remote-endpoint = <&dither0_in>;
+					};
+				};
+			};
+		};
+
+		dither0: dither@1c007000 {
+			compatible = "mediatek,mt8195-disp-dither", "mediatek,mt8183-disp-dither";
+			reg = <0 0x1c007000 0 0x1000>;
+			interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_DITHER0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dither0_in: endpoint {
+						remote-endpoint = <&gamma0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dither0_out: endpoint { };
+				};
+			};
+		};
+
+		dsi0: dsi@1c008000 {
+			compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi";
+			reg = <0 0x1c008000 0 0x1000>;
+			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DSI0>,
+				 <&vdosys0 CLK_VDO0_DSI0_DSI>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
+		dsc0: dsc@1c009000 {
+			compatible = "mediatek,mt8195-disp-dsc";
+			reg = <0 0x1c009000 0 0x1000>;
+			interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DSC_WRAP0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x9000 0x1000>;
+		};
+
+		dsi1: dsi@1c012000 {
+			compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi";
+			reg = <0 0x1c012000 0 0x1000>;
+			interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DSI1>,
+				 <&vdosys0 CLK_VDO0_DSI1_DSI>,
+				 <&mipi_tx1>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx1>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
+		merge0: merge@1c014000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c014000 0 0x1000>;
+			interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_VPP_MERGE0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x4000 0x1000>;
+		};
+
+		dp_intf0: dp-intf@1c015000 {
+			compatible = "mediatek,mt8195-dp-intf";
+			reg = <0 0x1c015000 0 0x1000>;
+			interrupts = <GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>,
+				 <&vdosys0  CLK_VDO0_DP_INTF0>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL1>;
+			clock-names = "pixel", "engine", "pll";
+			status = "disabled";
+		};
+
+		mutex: mutex@1c016000 {
+			compatible = "mediatek,mt8195-disp-mutex";
+			reg = <0 0x1c016000 0 0x1000>;
+			interrupts = <GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_MUTEX0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VDO0_DISP_STREAM_DONE_0>;
+		};
+
+		larb0: larb@1c018000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1c018000 0 0x1000>;
+			mediatek,larb-id = <0>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_LARB>,
+				 <&vdosys0 CLK_VDO0_SMI_LARB>,
+				 <&vppsys0 CLK_VPP0_GALS_VDO0_LARB0>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+		};
+
+		larb1: larb@1c019000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1c019000 0 0x1000>;
+			mediatek,larb-id = <1>;
+			mediatek,smi = <&smi_common_vpp>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_LARB>,
+				 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>,
+				 <&vppsys0 CLK_VPP0_GALS_VDO0_LARB1>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+		};
+
+		vdosys1: syscon@1c100000 {
+			compatible = "mediatek,mt8195-vdosys1", "syscon";
+			reg = <0 0x1c100000 0 0x1000>;
+			mboxes = <&gce0 1 CMDQ_THR_PRIO_4>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x0000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		smi_common_vdo: smi@1c01b000 {
+			compatible = "mediatek,mt8195-smi-common-vdo";
+			reg = <0 0x1c01b000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_COMMON>,
+				 <&vdosys0 CLK_VDO0_SMI_EMI>,
+				 <&vdosys0 CLK_VDO0_SMI_RSI>,
+				 <&vdosys0 CLK_VDO0_SMI_GALS>;
+			clock-names = "apb", "smi", "gals0", "gals1";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+
+		};
+
+		iommu_vdo: iommu@1c01f000 {
+			compatible = "mediatek,mt8195-iommu-vdo";
+			reg = <0 0x1c01f000 0 0x1000>;
+			mediatek,larbs = <&larb0 &larb2 &larb5 &larb7 &larb9
+					  &larb10 &larb11 &larb13 &larb17
+					  &larb19 &larb21 &larb24 &larb25
+					  &larb28>;
+			interrupts = <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH 0>;
+			#iommu-cells = <1>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_IOMMU>;
+			clock-names = "bclk";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+		};
+
+		mutex1: mutex@1c101000 {
+			compatible = "mediatek,mt8195-disp-mutex";
+			reg = <0 0x1c101000 0 0x1000>;
+			interrupts = <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>;
+		};
+
+		larb2: larb@1c102000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1c102000 0 0x1000>;
+			mediatek,larb-id = <2>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&vdosys1 CLK_VDO1_SMI_LARB2>,
+				 <&vdosys1 CLK_VDO1_SMI_LARB2>,
+				 <&vdosys1 CLK_VDO1_GALS>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+		};
+
+		larb3: larb@1c103000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1c103000 0 0x1000>;
+			mediatek,larb-id = <3>;
+			mediatek,smi = <&smi_common_vpp>;
+			clocks = <&vdosys1 CLK_VDO1_SMI_LARB3>,
+				 <&vdosys1 CLK_VDO1_GALS>,
+				 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+		};
+
+		vdo1_rdma0: dma-controller@1c104000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c104000 0 0x1000>;
+			interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma1: dma-controller@1c105000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c105000 0 0x1000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA1>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x5000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma2: dma-controller@1c106000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c106000 0 0x1000>;
+			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA2>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA2>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x6000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma3: dma-controller@1c107000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c107000 0 0x1000>;
+			interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA3>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA3>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x7000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma4: dma-controller@1c108000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c108000 0 0x1000>;
+			interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA4>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA4>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x8000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma5: dma-controller@1c109000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c109000 0 0x1000>;
+			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA5>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA5>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x9000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma6: dma-controller@1c10a000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c10a000 0 0x1000>;
+			interrupts = <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA6>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA6>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xa000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma7: dma-controller@1c10b000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c10b000 0 0x1000>;
+			interrupts = <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA7>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA7>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xb000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		merge1: vpp-merge@1c10c000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10c000 0 0x1000>;
+			interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE0>,
+				 <&vdosys1 CLK_VDO1_MERGE0_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xc000 0x1000>;
+			mediatek,merge-mute;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE0_DL_ASYNC>;
+		};
+
+		merge2: vpp-merge@1c10d000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10d000 0 0x1000>;
+			interrupts = <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE1>,
+				 <&vdosys1 CLK_VDO1_MERGE1_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xd000 0x1000>;
+			mediatek,merge-mute;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE1_DL_ASYNC>;
+		};
+
+		merge3: vpp-merge@1c10e000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10e000 0 0x1000>;
+			interrupts = <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE2>,
+				 <&vdosys1 CLK_VDO1_MERGE2_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xe000 0x1000>;
+			mediatek,merge-mute;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE2_DL_ASYNC>;
+		};
+
+		merge4: vpp-merge@1c10f000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10f000 0 0x1000>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE3>,
+				 <&vdosys1 CLK_VDO1_MERGE3_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xf000 0x1000>;
+			mediatek,merge-mute;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE3_DL_ASYNC>;
+		};
+
+		merge5: vpp-merge@1c110000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c110000 0 0x1000>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE4>,
+				 <&vdosys1 CLK_VDO1_MERGE4_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x0000 0x1000>;
+			mediatek,merge-fifo-en;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE4_DL_ASYNC>;
+		};
+
+		dp_intf1: dp-intf@1c113000 {
+			compatible = "mediatek,mt8195-dp-intf";
+			reg = <0 0x1c113000 0 0x1000>;
+			interrupts = <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			clocks = <&vdosys1 CLK_VDO1_DPINTF>,
+				 <&vdosys1 CLK_VDO1_DP_INTF0_MM>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL2>;
+			clock-names = "pixel", "engine", "pll";
+			status = "disabled";
+		};
+
+		ethdr0: hdr-engine@1c114000 {
+			compatible = "mediatek,mt8195-disp-ethdr";
+			reg = <0 0x1c114000 0 0x1000>,
+			      <0 0x1c115000 0 0x1000>,
+			      <0 0x1c117000 0 0x1000>,
+			      <0 0x1c119000 0 0x1000>,
+			      <0 0x1c11a000 0 0x1000>,
+			      <0 0x1c11b000 0 0x1000>,
+			      <0 0x1c11c000 0 0x1000>;
+			reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+				    "vdo_be", "adl_ds";
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xa000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xb000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xc000 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE0>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE1>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE0>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE1>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_BE>,
+				 <&vdosys1 CLK_VDO1_26M_SLOW>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>,
+				 <&topckgen CLK_TOP_ETHDR>;
+			clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+				      "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async",
+				      "gfx_fe0_async", "gfx_fe1_async","vdo_be_async",
+				      "ethdr_top";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>,
+				 <&iommu_vpp M4U_PORT_L3_HDR_ADL>;
+			interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>; /* disp mixer */
+			resets = <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>,
+				 <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>,
+				 <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>,
+				 <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>,
+				 <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>;
+			reset-names = "vdo_fe0_async", "vdo_fe1_async", "gfx_fe0_async",
+				      "gfx_fe1_async", "vdo_be_async";
+		};
+
+		edp_tx: edp-tx@1c500000 {
+			compatible = "mediatek,mt8195-edp-tx";
+			reg = <0 0x1c500000 0 0x8000>;
+			nvmem-cells = <&dp_calibration>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8195_POWER_DOMAIN_EPD_TX>;
+			interrupts = <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH 0>;
+			max-linkrate-mhz = <8100>;
+			status = "disabled";
+		};
+
+		dp_tx: dp-tx@1c600000 {
+			compatible = "mediatek,mt8195-dp-tx";
+			reg = <0 0x1c600000 0 0x8000>;
+			nvmem-cells = <&dp_calibration>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
+			max-linkrate-mhz = <8100>;
+			status = "disabled";
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU0>;
+
+			trips {
+				cpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU1>;
+
+			trips {
+				cpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU2>;
+
+			trips {
+				cpu2_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU3>;
+
+			trips {
+				cpu3_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU0>;
+
+			trips {
+				cpu4_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU1>;
+
+			trips {
+				cpu5_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU2>;
+
+			trips {
+				cpu6_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU3>;
+
+			trips {
+				cpu7_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		vpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_VPU0>;
+
+			trips {
+				vpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		vpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_VPU1>;
+
+			trips {
+				vpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_GPU0>;
+
+			trips {
+				gpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_GPU1>;
+
+			trips {
+				gpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		vdec-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_VDEC>;
+
+			trips {
+				vdec_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vdec_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		img-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_IMG>;
+
+			trips {
+				img_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				img_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		infra-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_INFRA>;
+
+			trips {
+				infra_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				infra_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_CAM0>;
+
+			trips {
+				cam0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_CAM1>;
+
+			trips {
+				cam1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h
new file mode 100644
index 000000000000..99535a6d5cba
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h
@@ -0,0 +1,1574 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2025 MediaTek Inc.
+ * Author: Guodong Liu <guodong.liu@mediatek.com>
+ *         Lei Xue <lei.xue@mediatek.com>
+ *         Cathy Xu <ot_cathy.xu@mediatek.com>
+ */
+
+#ifndef __MT8196_PINFUNC_H
+#define __MT8196_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define PINMUX_GPIO0__FUNC_DMIC1_CLK (MTK_PIN_NO(0) | 1)
+#define PINMUX_GPIO0__FUNC_SPI3_A_MO (MTK_PIN_NO(0) | 3)
+#define PINMUX_GPIO0__FUNC_FMI2S_B_LRCK (MTK_PIN_NO(0) | 4)
+#define PINMUX_GPIO0__FUNC_SCP_DMIC1_CLK (MTK_PIN_NO(0) | 5)
+#define PINMUX_GPIO0__FUNC_TP_GPIO14_AO (MTK_PIN_NO(0) | 6)
+
+#define PINMUX_GPIO1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define PINMUX_GPIO1__FUNC_DMIC1_DAT (MTK_PIN_NO(1) | 1)
+#define PINMUX_GPIO1__FUNC_SRCLKENAI1 (MTK_PIN_NO(1) | 2)
+#define PINMUX_GPIO1__FUNC_SPI3_A_MI (MTK_PIN_NO(1) | 3)
+#define PINMUX_GPIO1__FUNC_FMI2S_B_DI (MTK_PIN_NO(1) | 4)
+#define PINMUX_GPIO1__FUNC_SCP_DMIC1_DAT (MTK_PIN_NO(1) | 5)
+#define PINMUX_GPIO1__FUNC_TP_GPIO15_AO (MTK_PIN_NO(1) | 6)
+
+#define PINMUX_GPIO2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define PINMUX_GPIO2__FUNC_PWM_VLP (MTK_PIN_NO(2) | 1)
+#define PINMUX_GPIO2__FUNC_DSI_HSYNC (MTK_PIN_NO(2) | 2)
+#define PINMUX_GPIO2__FUNC_RG_TSFDC_LDO_EN (MTK_PIN_NO(2) | 5)
+#define PINMUX_GPIO2__FUNC_TP_GPIO8_AO (MTK_PIN_NO(2) | 6)
+
+#define PINMUX_GPIO3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define PINMUX_GPIO3__FUNC_MD_INT0 (MTK_PIN_NO(3) | 1)
+#define PINMUX_GPIO3__FUNC_DSI1_HSYNC (MTK_PIN_NO(3) | 2)
+#define PINMUX_GPIO3__FUNC_DA_TSFDC_LDO_MODE (MTK_PIN_NO(3) | 5)
+#define PINMUX_GPIO3__FUNC_TP_GPIO9_AO (MTK_PIN_NO(3) | 6)
+
+#define PINMUX_GPIO4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define PINMUX_GPIO4__FUNC_DISP_PWM1 (MTK_PIN_NO(4) | 1)
+#define PINMUX_GPIO4__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(4) | 2)
+
+#define PINMUX_GPIO5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define PINMUX_GPIO5__FUNC_LCM1_RST (MTK_PIN_NO(5) | 1)
+#define PINMUX_GPIO5__FUNC_SPI7_A_CLK (MTK_PIN_NO(5) | 2)
+
+#define PINMUX_GPIO6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define PINMUX_GPIO6__FUNC_DSI1_TE (MTK_PIN_NO(6) | 1)
+#define PINMUX_GPIO6__FUNC_SPI7_A_CSB (MTK_PIN_NO(6) | 2)
+
+#define PINMUX_GPIO7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define PINMUX_GPIO7__FUNC_SPI7_A_MO (MTK_PIN_NO(7) | 2)
+#define PINMUX_GPIO7__FUNC_GPS_PPS0 (MTK_PIN_NO(7) | 3)
+
+#define PINMUX_GPIO8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define PINMUX_GPIO8__FUNC_SPI7_A_MI (MTK_PIN_NO(8) | 2)
+#define PINMUX_GPIO8__FUNC_EDP_TX_HPD (MTK_PIN_NO(8) | 3)
+
+#define PINMUX_GPIO9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define PINMUX_GPIO9__FUNC_I2SIN1_LRCK (MTK_PIN_NO(9) | 3)
+#define PINMUX_GPIO9__FUNC_RG_TSFDC_LDO_REFSEL0 (MTK_PIN_NO(9) | 7)
+
+#define PINMUX_GPIO10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define PINMUX_GPIO10__FUNC_I2SOUT1_DO (MTK_PIN_NO(10) | 3)
+#define PINMUX_GPIO10__FUNC_RG_TSFDC_LDO_REFSEL1 (MTK_PIN_NO(10) | 7)
+
+#define PINMUX_GPIO11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define PINMUX_GPIO11__FUNC_FMI2S_B_BCK (MTK_PIN_NO(11) | 4)
+#define PINMUX_GPIO11__FUNC_DBG_MON_A30 (MTK_PIN_NO(11) | 7)
+
+#define PINMUX_GPIO12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define PINMUX_GPIO12__FUNC_I2SIN1_DI_B (MTK_PIN_NO(12) | 3)
+
+#define PINMUX_GPIO13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define PINMUX_GPIO13__FUNC_EDP_TX_HPD (MTK_PIN_NO(13) | 1)
+#define PINMUX_GPIO13__FUNC_GPS_PPS1 (MTK_PIN_NO(13) | 2)
+
+#define PINMUX_GPIO14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define PINMUX_GPIO14__FUNC_SRCLKENA2 (MTK_PIN_NO(14) | 1)
+#define PINMUX_GPIO14__FUNC_DSI2_TE (MTK_PIN_NO(14) | 2)
+#define PINMUX_GPIO14__FUNC_SPMI_P_TRIG_FLAG (MTK_PIN_NO(14) | 3)
+#define PINMUX_GPIO14__FUNC_MD_INT3 (MTK_PIN_NO(14) | 5)
+#define PINMUX_GPIO14__FUNC_TP_GPIO8_AO (MTK_PIN_NO(14) | 6)
+
+#define PINMUX_GPIO15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define PINMUX_GPIO15__FUNC_SRCLKENAI0 (MTK_PIN_NO(15) | 1)
+#define PINMUX_GPIO15__FUNC_SPMI_M_TRIG_FLAG (MTK_PIN_NO(15) | 2)
+#define PINMUX_GPIO15__FUNC_UCTS0 (MTK_PIN_NO(15) | 3)
+#define PINMUX_GPIO15__FUNC_MD_INT4 (MTK_PIN_NO(15) | 4)
+#define PINMUX_GPIO15__FUNC_I2SOUT2_DO (MTK_PIN_NO(15) | 5)
+#define PINMUX_GPIO15__FUNC_TP_GPIO9_AO (MTK_PIN_NO(15) | 6)
+
+#define PINMUX_GPIO16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define PINMUX_GPIO16__FUNC_SRCLKENAI1 (MTK_PIN_NO(16) | 1)
+#define PINMUX_GPIO16__FUNC_DP_TX_HPD (MTK_PIN_NO(16) | 2)
+#define PINMUX_GPIO16__FUNC_URTS0 (MTK_PIN_NO(16) | 3)
+#define PINMUX_GPIO16__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(16) | 4)
+#define PINMUX_GPIO16__FUNC_KPROW2 (MTK_PIN_NO(16) | 5)
+#define PINMUX_GPIO16__FUNC_TP_GPIO10_AO (MTK_PIN_NO(16) | 6)
+
+#define PINMUX_GPIO17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define PINMUX_GPIO17__FUNC_MD_INT0 (MTK_PIN_NO(17) | 1)
+#define PINMUX_GPIO17__FUNC_DP_OC_EN (MTK_PIN_NO(17) | 2)
+#define PINMUX_GPIO17__FUNC_UCTS1 (MTK_PIN_NO(17) | 3)
+#define PINMUX_GPIO17__FUNC_MD_NTN_URXD1 (MTK_PIN_NO(17) | 4)
+#define PINMUX_GPIO17__FUNC_KPCOL2 (MTK_PIN_NO(17) | 5)
+#define PINMUX_GPIO17__FUNC_TP_GPIO11_AO (MTK_PIN_NO(17) | 6)
+
+#define PINMUX_GPIO18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define PINMUX_GPIO18__FUNC_DMIC1_CLK (MTK_PIN_NO(18) | 1)
+#define PINMUX_GPIO18__FUNC_DP_RAUX_SBU1 (MTK_PIN_NO(18) | 2)
+#define PINMUX_GPIO18__FUNC_URTS1 (MTK_PIN_NO(18) | 3)
+#define PINMUX_GPIO18__FUNC_MD_NTN_UTXD1 (MTK_PIN_NO(18) | 4)
+#define PINMUX_GPIO18__FUNC_I2SIN2_DI (MTK_PIN_NO(18) | 5)
+#define PINMUX_GPIO18__FUNC_TP_UTXD_GNSS_VLP (MTK_PIN_NO(18) | 6)
+
+#define PINMUX_GPIO19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define PINMUX_GPIO19__FUNC_DMIC1_DAT (MTK_PIN_NO(19) | 1)
+#define PINMUX_GPIO19__FUNC_DP_RAUX_SBU2 (MTK_PIN_NO(19) | 2)
+#define PINMUX_GPIO19__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(19) | 3)
+#define PINMUX_GPIO19__FUNC_CLKM3_A (MTK_PIN_NO(19) | 4)
+#define PINMUX_GPIO19__FUNC_I2SIN2_BCK (MTK_PIN_NO(19) | 5)
+#define PINMUX_GPIO19__FUNC_TP_URXD_GNSS_VLP (MTK_PIN_NO(19) | 6)
+
+#define PINMUX_GPIO20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define PINMUX_GPIO20__FUNC_IDDIG (MTK_PIN_NO(20) | 1)
+#define PINMUX_GPIO20__FUNC_LCM2_RST (MTK_PIN_NO(20) | 2)
+#define PINMUX_GPIO20__FUNC_GPS_PPS1 (MTK_PIN_NO(20) | 3)
+#define PINMUX_GPIO20__FUNC_CLKM2_A (MTK_PIN_NO(20) | 4)
+
+#define PINMUX_GPIO21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define PINMUX_GPIO21__FUNC_BPI_BUS11 (MTK_PIN_NO(21) | 1)
+#define PINMUX_GPIO21__FUNC_PCIE_PERSTN_1P (MTK_PIN_NO(21) | 2)
+#define PINMUX_GPIO21__FUNC_DSI1_TE (MTK_PIN_NO(21) | 3)
+#define PINMUX_GPIO21__FUNC_DMIC_CLK (MTK_PIN_NO(21) | 4)
+#define PINMUX_GPIO21__FUNC_SCP_DMIC_CLK (MTK_PIN_NO(21) | 5)
+
+#define PINMUX_GPIO22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define PINMUX_GPIO22__FUNC_BPI_BUS12 (MTK_PIN_NO(22) | 1)
+#define PINMUX_GPIO22__FUNC_PCIE_CLKREQN_1P (MTK_PIN_NO(22) | 2)
+#define PINMUX_GPIO22__FUNC_DSI2_TE (MTK_PIN_NO(22) | 3)
+#define PINMUX_GPIO22__FUNC_DMIC_DAT (MTK_PIN_NO(22) | 4)
+#define PINMUX_GPIO22__FUNC_SCP_DMIC_DAT (MTK_PIN_NO(22) | 5)
+
+#define PINMUX_GPIO23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define PINMUX_GPIO23__FUNC_BPI_BUS13 (MTK_PIN_NO(23) | 1)
+#define PINMUX_GPIO23__FUNC_PCIE_WAKEN_1P (MTK_PIN_NO(23) | 2)
+#define PINMUX_GPIO23__FUNC_DSI3_TE (MTK_PIN_NO(23) | 3)
+#define PINMUX_GPIO23__FUNC_DMIC1_CLK (MTK_PIN_NO(23) | 4)
+#define PINMUX_GPIO23__FUNC_SCP_DMIC1_CLK (MTK_PIN_NO(23) | 5)
+
+#define PINMUX_GPIO24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define PINMUX_GPIO24__FUNC_BPI_BUS14 (MTK_PIN_NO(24) | 1)
+#define PINMUX_GPIO24__FUNC_LCM1_RST (MTK_PIN_NO(24) | 2)
+#define PINMUX_GPIO24__FUNC_AGPS_SYNC (MTK_PIN_NO(24) | 3)
+#define PINMUX_GPIO24__FUNC_DMIC1_DAT (MTK_PIN_NO(24) | 4)
+#define PINMUX_GPIO24__FUNC_SCP_DMIC1_DAT (MTK_PIN_NO(24) | 5)
+#define PINMUX_GPIO24__FUNC_DISP_PWM1 (MTK_PIN_NO(24) | 6)
+
+#define PINMUX_GPIO25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define PINMUX_GPIO25__FUNC_BPI_BUS15 (MTK_PIN_NO(25) | 1)
+#define PINMUX_GPIO25__FUNC_LCM2_RST (MTK_PIN_NO(25) | 2)
+#define PINMUX_GPIO25__FUNC_SRCLKENAI1 (MTK_PIN_NO(25) | 3)
+#define PINMUX_GPIO25__FUNC_DMIC2_CLK (MTK_PIN_NO(25) | 4)
+#define PINMUX_GPIO25__FUNC_DISP_PWM2 (MTK_PIN_NO(25) | 6)
+
+#define PINMUX_GPIO26__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define PINMUX_GPIO26__FUNC_BPI_BUS16 (MTK_PIN_NO(26) | 1)
+#define PINMUX_GPIO26__FUNC_LCM3_RST (MTK_PIN_NO(26) | 2)
+#define PINMUX_GPIO26__FUNC_DMIC2_DAT (MTK_PIN_NO(26) | 4)
+#define PINMUX_GPIO26__FUNC_DISP_PWM3 (MTK_PIN_NO(26) | 6)
+
+#define PINMUX_GPIO27__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define PINMUX_GPIO27__FUNC_BPI_BUS17 (MTK_PIN_NO(27) | 1)
+#define PINMUX_GPIO27__FUNC_UTXD4 (MTK_PIN_NO(27) | 2)
+#define PINMUX_GPIO27__FUNC_DISP_PWM4 (MTK_PIN_NO(27) | 6)
+#define PINMUX_GPIO27__FUNC_DBG_MON_A20 (MTK_PIN_NO(27) | 7)
+
+#define PINMUX_GPIO28__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define PINMUX_GPIO28__FUNC_BPI_BUS18 (MTK_PIN_NO(28) | 1)
+#define PINMUX_GPIO28__FUNC_URXD4 (MTK_PIN_NO(28) | 2)
+#define PINMUX_GPIO28__FUNC_SPI2_A_MI (MTK_PIN_NO(28) | 3)
+#define PINMUX_GPIO28__FUNC_CLKM0_A (MTK_PIN_NO(28) | 4)
+#define PINMUX_GPIO28__FUNC_DBG_MON_A21 (MTK_PIN_NO(28) | 7)
+
+#define PINMUX_GPIO29__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define PINMUX_GPIO29__FUNC_BPI_BUS19 (MTK_PIN_NO(29) | 1)
+#define PINMUX_GPIO29__FUNC_MD_NTN_UTXD1 (MTK_PIN_NO(29) | 2)
+#define PINMUX_GPIO29__FUNC_SPI2_A_MO (MTK_PIN_NO(29) | 3)
+#define PINMUX_GPIO29__FUNC_CLKM1_A (MTK_PIN_NO(29) | 4)
+#define PINMUX_GPIO29__FUNC_UCTS4 (MTK_PIN_NO(29) | 6)
+#define PINMUX_GPIO29__FUNC_DBG_MON_A17 (MTK_PIN_NO(29) | 7)
+
+#define PINMUX_GPIO30__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define PINMUX_GPIO30__FUNC_BPI_BUS20 (MTK_PIN_NO(30) | 1)
+#define PINMUX_GPIO30__FUNC_MD_NTN_URXD1 (MTK_PIN_NO(30) | 2)
+#define PINMUX_GPIO30__FUNC_SPI2_A_CLK (MTK_PIN_NO(30) | 3)
+#define PINMUX_GPIO30__FUNC_CLKM2_A (MTK_PIN_NO(30) | 4)
+#define PINMUX_GPIO30__FUNC_DSI3_HSYNC (MTK_PIN_NO(30) | 5)
+#define PINMUX_GPIO30__FUNC_URTS4 (MTK_PIN_NO(30) | 6)
+#define PINMUX_GPIO30__FUNC_DBG_MON_A18 (MTK_PIN_NO(30) | 7)
+
+#define PINMUX_GPIO31__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define PINMUX_GPIO31__FUNC_BPI_BUS21 (MTK_PIN_NO(31) | 1)
+#define PINMUX_GPIO31__FUNC_SPI2_A_CSB (MTK_PIN_NO(31) | 3)
+#define PINMUX_GPIO31__FUNC_CLKM3_A (MTK_PIN_NO(31) | 4)
+#define PINMUX_GPIO31__FUNC_EDP_TX_HPD (MTK_PIN_NO(31) | 6)
+#define PINMUX_GPIO31__FUNC_DBG_MON_A19 (MTK_PIN_NO(31) | 7)
+
+#define PINMUX_GPIO32__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define PINMUX_GPIO32__FUNC_LCM4_RST (MTK_PIN_NO(32) | 1)
+#define PINMUX_GPIO32__FUNC_DP_TX_HPD (MTK_PIN_NO(32) | 2)
+#define PINMUX_GPIO32__FUNC_SSPM_JTAG_TCK_VLP (MTK_PIN_NO(32) | 3)
+#define PINMUX_GPIO32__FUNC_ADSP_JTAG0_TCK (MTK_PIN_NO(32) | 4)
+#define PINMUX_GPIO32__FUNC_SCP_JTAG0_TCK_VLP (MTK_PIN_NO(32) | 5)
+#define PINMUX_GPIO32__FUNC_SPU0_TCK (MTK_PIN_NO(32) | 6)
+#define PINMUX_GPIO32__FUNC_IO_JTAG_TCK (MTK_PIN_NO(32) | 7)
+
+#define PINMUX_GPIO33__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define PINMUX_GPIO33__FUNC_DSI4_TE (MTK_PIN_NO(33) | 1)
+#define PINMUX_GPIO33__FUNC_DP_OC_EN (MTK_PIN_NO(33) | 2)
+#define PINMUX_GPIO33__FUNC_SSPM_JTAG_TRSTN_VLP (MTK_PIN_NO(33) | 3)
+#define PINMUX_GPIO33__FUNC_ADSP_JTAG0_TRSTN (MTK_PIN_NO(33) | 4)
+#define PINMUX_GPIO33__FUNC_SCP_JTAG0_TRSTN_VLP (MTK_PIN_NO(33) | 5)
+#define PINMUX_GPIO33__FUNC_SPU0_NTRST (MTK_PIN_NO(33) | 6)
+#define PINMUX_GPIO33__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(33) | 7)
+
+#define PINMUX_GPIO34__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define PINMUX_GPIO34__FUNC_UCTS5 (MTK_PIN_NO(34) | 1)
+#define PINMUX_GPIO34__FUNC_DP_RAUX_SBU1 (MTK_PIN_NO(34) | 2)
+#define PINMUX_GPIO34__FUNC_SSPM_JTAG_TDI_VLP (MTK_PIN_NO(34) | 3)
+#define PINMUX_GPIO34__FUNC_ADSP_JTAG0_TDI (MTK_PIN_NO(34) | 4)
+#define PINMUX_GPIO34__FUNC_SCP_JTAG0_TDI_VLP (MTK_PIN_NO(34) | 5)
+#define PINMUX_GPIO34__FUNC_SPU0_TDI (MTK_PIN_NO(34) | 6)
+#define PINMUX_GPIO34__FUNC_IO_JTAG_TDI (MTK_PIN_NO(34) | 7)
+
+#define PINMUX_GPIO35__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define PINMUX_GPIO35__FUNC_URTS5 (MTK_PIN_NO(35) | 1)
+#define PINMUX_GPIO35__FUNC_DP_RAUX_SBU2 (MTK_PIN_NO(35) | 2)
+#define PINMUX_GPIO35__FUNC_SSPM_JTAG_TDO_VLP (MTK_PIN_NO(35) | 3)
+#define PINMUX_GPIO35__FUNC_ADSP_JTAG0_TDO (MTK_PIN_NO(35) | 4)
+#define PINMUX_GPIO35__FUNC_SCP_JTAG0_TDO_VLP (MTK_PIN_NO(35) | 5)
+#define PINMUX_GPIO35__FUNC_SPU0_TDO (MTK_PIN_NO(35) | 6)
+#define PINMUX_GPIO35__FUNC_IO_JTAG_TDO (MTK_PIN_NO(35) | 7)
+
+#define PINMUX_GPIO36__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define PINMUX_GPIO36__FUNC_UTXD5 (MTK_PIN_NO(36) | 1)
+#define PINMUX_GPIO36__FUNC_SSPM_JTAG_TMS_VLP (MTK_PIN_NO(36) | 3)
+#define PINMUX_GPIO36__FUNC_ADSP_JTAG0_TMS (MTK_PIN_NO(36) | 4)
+#define PINMUX_GPIO36__FUNC_SCP_JTAG0_TMS_VLP (MTK_PIN_NO(36) | 5)
+#define PINMUX_GPIO36__FUNC_SPU0_TMS (MTK_PIN_NO(36) | 6)
+#define PINMUX_GPIO36__FUNC_IO_JTAG_TMS (MTK_PIN_NO(36) | 7)
+
+#define PINMUX_GPIO37__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define PINMUX_GPIO37__FUNC_URXD5 (MTK_PIN_NO(37) | 1)
+#define PINMUX_GPIO37__FUNC_MD_INT3 (MTK_PIN_NO(37) | 3)
+#define PINMUX_GPIO37__FUNC_CLKM0_B (MTK_PIN_NO(37) | 4)
+#define PINMUX_GPIO37__FUNC_TP_GPIO5_AO (MTK_PIN_NO(37) | 5)
+#define PINMUX_GPIO37__FUNC_SPU0_UTX (MTK_PIN_NO(37) | 6)
+#define PINMUX_GPIO37__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(37) | 7)
+
+#define PINMUX_GPIO38__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define PINMUX_GPIO38__FUNC_SPMI_P_TRIG_FLAG (MTK_PIN_NO(38) | 2)
+#define PINMUX_GPIO38__FUNC_MD_INT4 (MTK_PIN_NO(38) | 3)
+#define PINMUX_GPIO38__FUNC_CLKM1_B (MTK_PIN_NO(38) | 4)
+#define PINMUX_GPIO38__FUNC_TP_GPIO6_AO (MTK_PIN_NO(38) | 5)
+#define PINMUX_GPIO38__FUNC_SPU0_URX (MTK_PIN_NO(38) | 6)
+#define PINMUX_GPIO38__FUNC_DAP_MD32_SWD (MTK_PIN_NO(38) | 7)
+
+#define PINMUX_GPIO39__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define PINMUX_GPIO39__FUNC_I2S_MCK0 (MTK_PIN_NO(39) | 1)
+#define PINMUX_GPIO39__FUNC_GPS_PPS0 (MTK_PIN_NO(39) | 3)
+#define PINMUX_GPIO39__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(39) | 4)
+#define PINMUX_GPIO39__FUNC_DBG_MON_B12 (MTK_PIN_NO(39) | 7)
+
+#define PINMUX_GPIO40__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define PINMUX_GPIO40__FUNC_I2SIN6_0_BCK (MTK_PIN_NO(40) | 1)
+#define PINMUX_GPIO40__FUNC_SPI4_B_CLK (MTK_PIN_NO(40) | 3)
+#define PINMUX_GPIO40__FUNC_UCTS2 (MTK_PIN_NO(40) | 4)
+#define PINMUX_GPIO40__FUNC_CCU1_UTXD (MTK_PIN_NO(40) | 5)
+#define PINMUX_GPIO40__FUNC_DBG_MON_B13 (MTK_PIN_NO(40) | 7)
+
+#define PINMUX_GPIO41__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define PINMUX_GPIO41__FUNC_I2SIN6_0_LRCK (MTK_PIN_NO(41) | 1)
+#define PINMUX_GPIO41__FUNC_SPI4_B_CSB (MTK_PIN_NO(41) | 3)
+#define PINMUX_GPIO41__FUNC_URTS2 (MTK_PIN_NO(41) | 4)
+#define PINMUX_GPIO41__FUNC_CCU1_URXD (MTK_PIN_NO(41) | 5)
+#define PINMUX_GPIO41__FUNC_DBG_MON_B14 (MTK_PIN_NO(41) | 7)
+
+#define PINMUX_GPIO42__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define PINMUX_GPIO42__FUNC_I2SIN6_0_DI (MTK_PIN_NO(42) | 1)
+#define PINMUX_GPIO42__FUNC_SPI4_B_MI (MTK_PIN_NO(42) | 3)
+#define PINMUX_GPIO42__FUNC_URXD2 (MTK_PIN_NO(42) | 4)
+#define PINMUX_GPIO42__FUNC_CCU1_URTS (MTK_PIN_NO(42) | 5)
+#define PINMUX_GPIO42__FUNC_MD32_0_RXD (MTK_PIN_NO(42) | 6)
+#define PINMUX_GPIO42__FUNC_DBG_MON_B15 (MTK_PIN_NO(42) | 7)
+
+#define PINMUX_GPIO43__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define PINMUX_GPIO43__FUNC_I2SOUT6_0_DO (MTK_PIN_NO(43) | 1)
+#define PINMUX_GPIO43__FUNC_SPI4_B_MO (MTK_PIN_NO(43) | 3)
+#define PINMUX_GPIO43__FUNC_UTXD2 (MTK_PIN_NO(43) | 4)
+#define PINMUX_GPIO43__FUNC_CCU1_UCTS (MTK_PIN_NO(43) | 5)
+#define PINMUX_GPIO43__FUNC_MD32_0_TXD (MTK_PIN_NO(43) | 6)
+#define PINMUX_GPIO43__FUNC_DBG_MON_B16 (MTK_PIN_NO(43) | 7)
+
+#define PINMUX_GPIO44__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define PINMUX_GPIO44__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(44) | 1)
+#define PINMUX_GPIO44__FUNC_SPI3_A_CLK (MTK_PIN_NO(44) | 3)
+#define PINMUX_GPIO44__FUNC_TP_GPIO10_AO (MTK_PIN_NO(44) | 6)
+
+#define PINMUX_GPIO45__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define PINMUX_GPIO45__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(45) | 1)
+#define PINMUX_GPIO45__FUNC_DSI2_HSYNC (MTK_PIN_NO(45) | 2)
+#define PINMUX_GPIO45__FUNC_SPI3_A_CSB (MTK_PIN_NO(45) | 3)
+#define PINMUX_GPIO45__FUNC_PWM_VLP (MTK_PIN_NO(45) | 4)
+#define PINMUX_GPIO45__FUNC_TP_GPIO11_AO (MTK_PIN_NO(45) | 6)
+
+#define PINMUX_GPIO46__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define PINMUX_GPIO46__FUNC_SCP_SCL4 (MTK_PIN_NO(46) | 1)
+#define PINMUX_GPIO46__FUNC_PWM_VLP (MTK_PIN_NO(46) | 2)
+#define PINMUX_GPIO46__FUNC_SCP_ILDO_DTEST1_VLP (MTK_PIN_NO(46) | 4)
+#define PINMUX_GPIO46__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(46) | 5)
+#define PINMUX_GPIO46__FUNC_TP_GPIO0_AO (MTK_PIN_NO(46) | 6)
+
+#define PINMUX_GPIO47__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define PINMUX_GPIO47__FUNC_SCP_SDA4 (MTK_PIN_NO(47) | 1)
+#define PINMUX_GPIO47__FUNC_SCP_ILDO_DTEST2_VLP (MTK_PIN_NO(47) | 4)
+#define PINMUX_GPIO47__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(47) | 5)
+#define PINMUX_GPIO47__FUNC_TP_GPIO1_AO (MTK_PIN_NO(47) | 6)
+
+#define PINMUX_GPIO48__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define PINMUX_GPIO48__FUNC_SCP_SCL5 (MTK_PIN_NO(48) | 1)
+#define PINMUX_GPIO48__FUNC_PWM_VLP (MTK_PIN_NO(48) | 2)
+#define PINMUX_GPIO48__FUNC_CCU0_UTXD (MTK_PIN_NO(48) | 3)
+#define PINMUX_GPIO48__FUNC_SCP_ILDO_DTEST3_VLP (MTK_PIN_NO(48) | 4)
+#define PINMUX_GPIO48__FUNC_TP_GPIO2_AO (MTK_PIN_NO(48) | 6)
+
+#define PINMUX_GPIO49__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define PINMUX_GPIO49__FUNC_SCP_SDA5 (MTK_PIN_NO(49) | 1)
+#define PINMUX_GPIO49__FUNC_CCU0_URXD (MTK_PIN_NO(49) | 3)
+#define PINMUX_GPIO49__FUNC_SCP_ILDO_DTEST4_VLP (MTK_PIN_NO(49) | 4)
+#define PINMUX_GPIO49__FUNC_TP_GPIO3_AO (MTK_PIN_NO(49) | 6)
+
+#define PINMUX_GPIO50__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define PINMUX_GPIO50__FUNC_SCP_SCL6 (MTK_PIN_NO(50) | 1)
+#define PINMUX_GPIO50__FUNC_PWM_VLP (MTK_PIN_NO(50) | 2)
+#define PINMUX_GPIO50__FUNC_CCU0_URTS (MTK_PIN_NO(50) | 3)
+#define PINMUX_GPIO50__FUNC_DSI_HSYNC (MTK_PIN_NO(50) | 4)
+#define PINMUX_GPIO50__FUNC_TP_GPIO4_AO (MTK_PIN_NO(50) | 6)
+
+#define PINMUX_GPIO51__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define PINMUX_GPIO51__FUNC_SCP_SDA6 (MTK_PIN_NO(51) | 1)
+#define PINMUX_GPIO51__FUNC_CCU0_UCTS (MTK_PIN_NO(51) | 3)
+#define PINMUX_GPIO51__FUNC_DSI1_HSYNC (MTK_PIN_NO(51) | 4)
+#define PINMUX_GPIO51__FUNC_TP_GPIO5_AO (MTK_PIN_NO(51) | 6)
+
+#define PINMUX_GPIO52__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define PINMUX_GPIO52__FUNC_SCP_SCL1 (MTK_PIN_NO(52) | 1)
+#define PINMUX_GPIO52__FUNC_TDM_DATA2 (MTK_PIN_NO(52) | 3)
+
+#define PINMUX_GPIO53__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define PINMUX_GPIO53__FUNC_SCP_SDA1 (MTK_PIN_NO(53) | 1)
+#define PINMUX_GPIO53__FUNC_TDM_DATA3 (MTK_PIN_NO(53) | 3)
+
+#define PINMUX_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define PINMUX_GPIO54__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(54) | 1)
+#define PINMUX_GPIO54__FUNC_TDM_MCK (MTK_PIN_NO(54) | 3)
+
+#define PINMUX_GPIO55__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define PINMUX_GPIO55__FUNC_AUD_CLK_MISO (MTK_PIN_NO(55) | 1)
+#define PINMUX_GPIO55__FUNC_I2SOUT2_BCK (MTK_PIN_NO(55) | 2)
+#define PINMUX_GPIO55__FUNC_TDM_BCK (MTK_PIN_NO(55) | 3)
+
+#define PINMUX_GPIO56__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define PINMUX_GPIO56__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(56) | 1)
+#define PINMUX_GPIO56__FUNC_I2SOUT2_LRCK (MTK_PIN_NO(56) | 2)
+#define PINMUX_GPIO56__FUNC_TDM_LRCK (MTK_PIN_NO(56) | 3)
+
+#define PINMUX_GPIO57__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define PINMUX_GPIO57__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(57) | 1)
+#define PINMUX_GPIO57__FUNC_I2SOUT2_DO (MTK_PIN_NO(57) | 2)
+#define PINMUX_GPIO57__FUNC_TDM_DATA0 (MTK_PIN_NO(57) | 3)
+
+#define PINMUX_GPIO58__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define PINMUX_GPIO58__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(58) | 1)
+#define PINMUX_GPIO58__FUNC_TDM_DATA1 (MTK_PIN_NO(58) | 3)
+
+#define PINMUX_GPIO59__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define PINMUX_GPIO59__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(59) | 1)
+#define PINMUX_GPIO59__FUNC_I2SIN1_BCK (MTK_PIN_NO(59) | 3)
+
+#define PINMUX_GPIO60__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define PINMUX_GPIO60__FUNC_KPCOL0 (MTK_PIN_NO(60) | 1)
+#define PINMUX_GPIO60__FUNC_TP_GPIO13_AO (MTK_PIN_NO(60) | 6)
+
+#define PINMUX_GPIO61__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define PINMUX_GPIO61__FUNC_MCU_M_PMIC_POC_I (MTK_PIN_NO(61) | 1)
+
+#define PINMUX_GPIO62__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define PINMUX_GPIO62__FUNC_MCU_B_PMIC_POC_I (MTK_PIN_NO(62) | 1)
+
+#define PINMUX_GPIO63__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define PINMUX_GPIO63__FUNC_MFG_PMIC_POC_I (MTK_PIN_NO(63) | 1)
+
+#define PINMUX_GPIO64__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define PINMUX_GPIO64__FUNC_PRE_UVLO (MTK_PIN_NO(64) | 1)
+
+#define PINMUX_GPIO65__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define PINMUX_GPIO65__FUNC_DPM2PMIC (MTK_PIN_NO(65) | 1)
+#define PINMUX_GPIO65__FUNC_SRCLKENA1 (MTK_PIN_NO(65) | 2)
+
+#define PINMUX_GPIO66__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define PINMUX_GPIO66__FUNC_WATCHDOG (MTK_PIN_NO(66) | 1)
+
+#define PINMUX_GPIO67__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define PINMUX_GPIO67__FUNC_SRCLKENA0 (MTK_PIN_NO(67) | 1)
+
+#define PINMUX_GPIO68__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define PINMUX_GPIO68__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(68) | 1)
+
+#define PINMUX_GPIO69__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define PINMUX_GPIO69__FUNC_RTC32K_CK (MTK_PIN_NO(69) | 1)
+
+#define PINMUX_GPIO70__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define PINMUX_GPIO70__FUNC_CMFLASH0 (MTK_PIN_NO(70) | 1)
+
+#define PINMUX_GPIO71__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+
+#define PINMUX_GPIO72__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+
+#define PINMUX_GPIO73__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+
+#define PINMUX_GPIO74__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define PINMUX_GPIO74__FUNC_DCXO_FPM_LPM (MTK_PIN_NO(74) | 1)
+
+#define PINMUX_GPIO75__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define PINMUX_GPIO75__FUNC_SPMI_M_SCL (MTK_PIN_NO(75) | 1)
+
+#define PINMUX_GPIO76__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define PINMUX_GPIO76__FUNC_SPMI_M_SDA (MTK_PIN_NO(76) | 1)
+
+#define PINMUX_GPIO77__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define PINMUX_GPIO77__FUNC_SPMI_P_SCL (MTK_PIN_NO(77) | 1)
+
+#define PINMUX_GPIO78__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define PINMUX_GPIO78__FUNC_SPMI_P_SDA (MTK_PIN_NO(78) | 1)
+
+#define PINMUX_GPIO79__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define PINMUX_GPIO79__FUNC_CMMCLK0 (MTK_PIN_NO(79) | 1)
+#define PINMUX_GPIO79__FUNC_MD_INT4 (MTK_PIN_NO(79) | 2)
+
+#define PINMUX_GPIO80__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define PINMUX_GPIO80__FUNC_CMMCLK1 (MTK_PIN_NO(80) | 1)
+
+#define PINMUX_GPIO81__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define PINMUX_GPIO81__FUNC_SCP_SPI0_CK (MTK_PIN_NO(81) | 1)
+#define PINMUX_GPIO81__FUNC_SPI6_B_CLK (MTK_PIN_NO(81) | 2)
+#define PINMUX_GPIO81__FUNC_PWM_VLP (MTK_PIN_NO(81) | 3)
+#define PINMUX_GPIO81__FUNC_I2SOUT5_BCK (MTK_PIN_NO(81) | 4)
+#define PINMUX_GPIO81__FUNC_TP_GPIO0_AO (MTK_PIN_NO(81) | 6)
+
+#define PINMUX_GPIO82__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define PINMUX_GPIO82__FUNC_SCP_SPI0_CS (MTK_PIN_NO(82) | 1)
+#define PINMUX_GPIO82__FUNC_SPI6_B_CSB (MTK_PIN_NO(82) | 2)
+#define PINMUX_GPIO82__FUNC_I2SOUT5_LRCK (MTK_PIN_NO(82) | 4)
+#define PINMUX_GPIO82__FUNC_TP_GPIO1_AO (MTK_PIN_NO(82) | 6)
+
+#define PINMUX_GPIO83__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define PINMUX_GPIO83__FUNC_SCP_SPI0_MO (MTK_PIN_NO(83) | 1)
+#define PINMUX_GPIO83__FUNC_SPI6_B_MO (MTK_PIN_NO(83) | 2)
+#define PINMUX_GPIO83__FUNC_I2SOUT5_DATA0 (MTK_PIN_NO(83) | 4)
+#define PINMUX_GPIO83__FUNC_TP_GPIO2_AO (MTK_PIN_NO(83) | 6)
+
+#define PINMUX_GPIO84__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define PINMUX_GPIO84__FUNC_SCP_SPI0_MI (MTK_PIN_NO(84) | 1)
+#define PINMUX_GPIO84__FUNC_SPI6_B_MI (MTK_PIN_NO(84) | 2)
+#define PINMUX_GPIO84__FUNC_I2SOUT5_DATA1 (MTK_PIN_NO(84) | 4)
+#define PINMUX_GPIO84__FUNC_TP_GPIO3_AO (MTK_PIN_NO(84) | 6)
+
+#define PINMUX_GPIO85__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define PINMUX_GPIO85__FUNC_SCP_SPI1_CK (MTK_PIN_NO(85) | 1)
+#define PINMUX_GPIO85__FUNC_SPI7_B_CLK (MTK_PIN_NO(85) | 2)
+#define PINMUX_GPIO85__FUNC_I2SIN5_DATA0 (MTK_PIN_NO(85) | 4)
+#define PINMUX_GPIO85__FUNC_PWM_VLP (MTK_PIN_NO(85) | 5)
+#define PINMUX_GPIO85__FUNC_TP_GPIO4_AO (MTK_PIN_NO(85) | 6)
+
+#define PINMUX_GPIO86__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define PINMUX_GPIO86__FUNC_SCP_SPI1_CS (MTK_PIN_NO(86) | 1)
+#define PINMUX_GPIO86__FUNC_SPI7_B_CSB (MTK_PIN_NO(86) | 2)
+#define PINMUX_GPIO86__FUNC_I2SIN5_DATA1 (MTK_PIN_NO(86) | 4)
+#define PINMUX_GPIO86__FUNC_TP_GPIO5_AO (MTK_PIN_NO(86) | 6)
+
+#define PINMUX_GPIO87__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define PINMUX_GPIO87__FUNC_SCP_SPI1_MO (MTK_PIN_NO(87) | 1)
+#define PINMUX_GPIO87__FUNC_SPI7_B_MO (MTK_PIN_NO(87) | 2)
+#define PINMUX_GPIO87__FUNC_I2SIN5_BCK (MTK_PIN_NO(87) | 4)
+#define PINMUX_GPIO87__FUNC_TP_GPIO6_AO (MTK_PIN_NO(87) | 6)
+
+#define PINMUX_GPIO88__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define PINMUX_GPIO88__FUNC_SCP_SPI1_MI (MTK_PIN_NO(88) | 1)
+#define PINMUX_GPIO88__FUNC_SPI7_B_MI (MTK_PIN_NO(88) | 2)
+#define PINMUX_GPIO88__FUNC_I2SIN5_LRCK (MTK_PIN_NO(88) | 4)
+#define PINMUX_GPIO88__FUNC_TP_GPIO7_AO (MTK_PIN_NO(88) | 6)
+
+#define PINMUX_GPIO89__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define PINMUX_GPIO89__FUNC_DSI_TE (MTK_PIN_NO(89) | 1)
+#define PINMUX_GPIO89__FUNC_DSI1_TE (MTK_PIN_NO(89) | 2)
+#define PINMUX_GPIO89__FUNC_DBG_MON_B30 (MTK_PIN_NO(89) | 7)
+
+#define PINMUX_GPIO90__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define PINMUX_GPIO90__FUNC_LCM_RST (MTK_PIN_NO(90) | 1)
+#define PINMUX_GPIO90__FUNC_LCM1_RST (MTK_PIN_NO(90) | 2)
+#define PINMUX_GPIO90__FUNC_DBG_MON_B31 (MTK_PIN_NO(90) | 7)
+
+#define PINMUX_GPIO91__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define PINMUX_GPIO91__FUNC_CMFLASH2 (MTK_PIN_NO(91) | 1)
+#define PINMUX_GPIO91__FUNC_SF_D0 (MTK_PIN_NO(91) | 2)
+#define PINMUX_GPIO91__FUNC_SRCLKENAI1 (MTK_PIN_NO(91) | 3)
+#define PINMUX_GPIO91__FUNC_KPCOL2 (MTK_PIN_NO(91) | 5)
+#define PINMUX_GPIO91__FUNC_TP_GPIO11_AO (MTK_PIN_NO(91) | 6)
+
+#define PINMUX_GPIO92__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define PINMUX_GPIO92__FUNC_CMFLASH3 (MTK_PIN_NO(92) | 1)
+#define PINMUX_GPIO92__FUNC_SF_D1 (MTK_PIN_NO(92) | 2)
+#define PINMUX_GPIO92__FUNC_DISP_PWM1 (MTK_PIN_NO(92) | 4)
+#define PINMUX_GPIO92__FUNC_TP_GPIO12_AO (MTK_PIN_NO(92) | 6)
+
+#define PINMUX_GPIO93__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define PINMUX_GPIO93__FUNC_CMFLASH1 (MTK_PIN_NO(93) | 1)
+#define PINMUX_GPIO93__FUNC_SF_D2 (MTK_PIN_NO(93) | 2)
+#define PINMUX_GPIO93__FUNC_SRCLKENAI0 (MTK_PIN_NO(93) | 3)
+#define PINMUX_GPIO93__FUNC_KPROW2 (MTK_PIN_NO(93) | 5)
+#define PINMUX_GPIO93__FUNC_TP_GPIO13_AO (MTK_PIN_NO(93) | 6)
+
+#define PINMUX_GPIO94__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define PINMUX_GPIO94__FUNC_I2S_MCK1 (MTK_PIN_NO(94) | 1)
+#define PINMUX_GPIO94__FUNC_SF_D3 (MTK_PIN_NO(94) | 2)
+#define PINMUX_GPIO94__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(94) | 4)
+#define PINMUX_GPIO94__FUNC_CLKM0_A (MTK_PIN_NO(94) | 5)
+#define PINMUX_GPIO94__FUNC_TP_GPIO14_AO (MTK_PIN_NO(94) | 6)
+#define PINMUX_GPIO94__FUNC_DBG_MON_B18 (MTK_PIN_NO(94) | 7)
+
+#define PINMUX_GPIO95__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define PINMUX_GPIO95__FUNC_I2SIN1_BCK (MTK_PIN_NO(95) | 1)
+#define PINMUX_GPIO95__FUNC_I2SIN4_BCK (MTK_PIN_NO(95) | 2)
+#define PINMUX_GPIO95__FUNC_SPI6_A_CLK (MTK_PIN_NO(95) | 3)
+#define PINMUX_GPIO95__FUNC_MD32_1_GPIO0 (MTK_PIN_NO(95) | 4)
+#define PINMUX_GPIO95__FUNC_CLKM1_A (MTK_PIN_NO(95) | 5)
+#define PINMUX_GPIO95__FUNC_TP_GPIO15_AO (MTK_PIN_NO(95) | 6)
+#define PINMUX_GPIO95__FUNC_DBG_MON_B19 (MTK_PIN_NO(95) | 7)
+
+#define PINMUX_GPIO96__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define PINMUX_GPIO96__FUNC_I2SIN1_LRCK (MTK_PIN_NO(96) | 1)
+#define PINMUX_GPIO96__FUNC_I2SIN4_LRCK (MTK_PIN_NO(96) | 2)
+#define PINMUX_GPIO96__FUNC_SPI6_A_CSB (MTK_PIN_NO(96) | 3)
+#define PINMUX_GPIO96__FUNC_MD32_2_GPIO0 (MTK_PIN_NO(96) | 4)
+#define PINMUX_GPIO96__FUNC_CLKM2_A (MTK_PIN_NO(96) | 5)
+#define PINMUX_GPIO96__FUNC_DBG_MON_B20 (MTK_PIN_NO(96) | 7)
+
+#define PINMUX_GPIO97__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define PINMUX_GPIO97__FUNC_I2SIN1_DI_A (MTK_PIN_NO(97) | 1)
+#define PINMUX_GPIO97__FUNC_I2SIN4_DATA0 (MTK_PIN_NO(97) | 2)
+#define PINMUX_GPIO97__FUNC_SPI6_A_MO (MTK_PIN_NO(97) | 3)
+#define PINMUX_GPIO97__FUNC_MD32_3_GPIO0 (MTK_PIN_NO(97) | 4)
+#define PINMUX_GPIO97__FUNC_CLKM3_A (MTK_PIN_NO(97) | 5)
+#define PINMUX_GPIO97__FUNC_DBG_MON_B21 (MTK_PIN_NO(97) | 7)
+
+#define PINMUX_GPIO98__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define PINMUX_GPIO98__FUNC_I2SOUT1_DO (MTK_PIN_NO(98) | 1)
+#define PINMUX_GPIO98__FUNC_I2SOUT4_DATA0 (MTK_PIN_NO(98) | 2)
+#define PINMUX_GPIO98__FUNC_SPI6_A_MI (MTK_PIN_NO(98) | 3)
+#define PINMUX_GPIO98__FUNC_DBG_MON_B22 (MTK_PIN_NO(98) | 7)
+
+#define PINMUX_GPIO99__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define PINMUX_GPIO99__FUNC_SCL0 (MTK_PIN_NO(99) | 1)
+#define PINMUX_GPIO99__FUNC_LCM2_RST (MTK_PIN_NO(99) | 2)
+#define PINMUX_GPIO99__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(99) | 3)
+#define PINMUX_GPIO99__FUNC_SPU0_SCL (MTK_PIN_NO(99) | 4)
+#define PINMUX_GPIO99__FUNC_DBG_MON_B24 (MTK_PIN_NO(99) | 7)
+
+#define PINMUX_GPIO100__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define PINMUX_GPIO100__FUNC_SDA0 (MTK_PIN_NO(100) | 1)
+#define PINMUX_GPIO100__FUNC_DSI2_TE (MTK_PIN_NO(100) | 2)
+#define PINMUX_GPIO100__FUNC_SPU0_SDA (MTK_PIN_NO(100) | 4)
+#define PINMUX_GPIO100__FUNC_DBG_MON_B25 (MTK_PIN_NO(100) | 7)
+
+#define PINMUX_GPIO101__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define PINMUX_GPIO101__FUNC_SCL10 (MTK_PIN_NO(101) | 1)
+#define PINMUX_GPIO101__FUNC_SF_CS (MTK_PIN_NO(101) | 2)
+#define PINMUX_GPIO101__FUNC_SCP_DMIC1_CLK (MTK_PIN_NO(101) | 3)
+#define PINMUX_GPIO101__FUNC_I2SIN5_DATA2 (MTK_PIN_NO(101) | 4)
+#define PINMUX_GPIO101__FUNC_SCP_SCL_OIS (MTK_PIN_NO(101) | 5)
+#define PINMUX_GPIO101__FUNC_TP_GPIO10_AO (MTK_PIN_NO(101) | 6)
+#define PINMUX_GPIO101__FUNC_DBG_MON_B28 (MTK_PIN_NO(101) | 7)
+
+#define PINMUX_GPIO102__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define PINMUX_GPIO102__FUNC_SDA10 (MTK_PIN_NO(102) | 1)
+#define PINMUX_GPIO102__FUNC_SF_CK (MTK_PIN_NO(102) | 2)
+#define PINMUX_GPIO102__FUNC_SCP_DMIC1_DAT (MTK_PIN_NO(102) | 3)
+#define PINMUX_GPIO102__FUNC_I2SIN5_DATA3 (MTK_PIN_NO(102) | 4)
+#define PINMUX_GPIO102__FUNC_SCP_SDA_OIS (MTK_PIN_NO(102) | 5)
+#define PINMUX_GPIO102__FUNC_TP_GPIO11_AO (MTK_PIN_NO(102) | 6)
+#define PINMUX_GPIO102__FUNC_DBG_MON_B29 (MTK_PIN_NO(102) | 7)
+
+#define PINMUX_GPIO103__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define PINMUX_GPIO103__FUNC_DISP_PWM (MTK_PIN_NO(103) | 1)
+#define PINMUX_GPIO103__FUNC_DSI1_TE (MTK_PIN_NO(103) | 2)
+#define PINMUX_GPIO103__FUNC_I2S_MCK0 (MTK_PIN_NO(103) | 5)
+#define PINMUX_GPIO103__FUNC_DBG_MON_B23 (MTK_PIN_NO(103) | 7)
+
+#define PINMUX_GPIO104__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define PINMUX_GPIO104__FUNC_SCL6 (MTK_PIN_NO(104) | 1)
+#define PINMUX_GPIO104__FUNC_SPU1_SCL (MTK_PIN_NO(104) | 2)
+#define PINMUX_GPIO104__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(104) | 3)
+#define PINMUX_GPIO104__FUNC_USB_DRVVBUS_2P (MTK_PIN_NO(104) | 4)
+#define PINMUX_GPIO104__FUNC_I2S_MCK1 (MTK_PIN_NO(104) | 5)
+#define PINMUX_GPIO104__FUNC_IDDIG_2P (MTK_PIN_NO(104) | 6)
+#define PINMUX_GPIO104__FUNC_DBG_MON_B26 (MTK_PIN_NO(104) | 7)
+
+#define PINMUX_GPIO105__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define PINMUX_GPIO105__FUNC_SDA6 (MTK_PIN_NO(105) | 1)
+#define PINMUX_GPIO105__FUNC_SPU1_SDA (MTK_PIN_NO(105) | 2)
+#define PINMUX_GPIO105__FUNC_DISP_PWM2 (MTK_PIN_NO(105) | 3)
+#define PINMUX_GPIO105__FUNC_VBUSVALID_2P (MTK_PIN_NO(105) | 4)
+#define PINMUX_GPIO105__FUNC_I2S_MCK2 (MTK_PIN_NO(105) | 5)
+#define PINMUX_GPIO105__FUNC_VBUSVALID_3P (MTK_PIN_NO(105) | 6)
+#define PINMUX_GPIO105__FUNC_DBG_MON_B27 (MTK_PIN_NO(105) | 7)
+
+#define PINMUX_GPIO106__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define PINMUX_GPIO106__FUNC_SCP_SPI3_CK (MTK_PIN_NO(106) | 1)
+#define PINMUX_GPIO106__FUNC_SPI3_B_CLK (MTK_PIN_NO(106) | 2)
+#define PINMUX_GPIO106__FUNC_MD_UTXD0 (MTK_PIN_NO(106) | 3)
+#define PINMUX_GPIO106__FUNC_TP_UTXD1_VLP (MTK_PIN_NO(106) | 4)
+#define PINMUX_GPIO106__FUNC_CONN_BG_GPS_MCU_UART0_TXD (MTK_PIN_NO(106) | 5)
+#define PINMUX_GPIO106__FUNC_TP_GPIO6_AO (MTK_PIN_NO(106) | 6)
+#define PINMUX_GPIO106__FUNC_DBG_MON_B0 (MTK_PIN_NO(106) | 7)
+
+#define PINMUX_GPIO107__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define PINMUX_GPIO107__FUNC_SCP_SPI3_CS (MTK_PIN_NO(107) | 1)
+#define PINMUX_GPIO107__FUNC_SPI3_B_CSB (MTK_PIN_NO(107) | 2)
+#define PINMUX_GPIO107__FUNC_MD_URXD0 (MTK_PIN_NO(107) | 3)
+#define PINMUX_GPIO107__FUNC_TP_URXD1_VLP (MTK_PIN_NO(107) | 4)
+#define PINMUX_GPIO107__FUNC_CONN_BG_GPS_MCU_UART0_RXD (MTK_PIN_NO(107) | 5)
+#define PINMUX_GPIO107__FUNC_TP_GPIO7_AO (MTK_PIN_NO(107) | 6)
+#define PINMUX_GPIO107__FUNC_DBG_MON_B1 (MTK_PIN_NO(107) | 7)
+
+#define PINMUX_GPIO108__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define PINMUX_GPIO108__FUNC_SCP_SPI3_MO (MTK_PIN_NO(108) | 1)
+#define PINMUX_GPIO108__FUNC_SPI3_B_MO (MTK_PIN_NO(108) | 2)
+#define PINMUX_GPIO108__FUNC_MD_UTXD1 (MTK_PIN_NO(108) | 3)
+#define PINMUX_GPIO108__FUNC_MD32PCM_UTXD_AO_VLP (MTK_PIN_NO(108) | 4)
+#define PINMUX_GPIO108__FUNC_CONN_BG_GPS_MCU_UART1_TXD (MTK_PIN_NO(108) | 5)
+#define PINMUX_GPIO108__FUNC_TP_GPIO8_AO (MTK_PIN_NO(108) | 6)
+#define PINMUX_GPIO108__FUNC_DBG_MON_B2 (MTK_PIN_NO(108) | 7)
+
+#define PINMUX_GPIO109__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define PINMUX_GPIO109__FUNC_SCP_SPI3_MI (MTK_PIN_NO(109) | 1)
+#define PINMUX_GPIO109__FUNC_SPI3_B_MI (MTK_PIN_NO(109) | 2)
+#define PINMUX_GPIO109__FUNC_MD_URXD1 (MTK_PIN_NO(109) | 3)
+#define PINMUX_GPIO109__FUNC_MD32PCM_URXD_AO_VLP (MTK_PIN_NO(109) | 4)
+#define PINMUX_GPIO109__FUNC_CONN_BG_GPS_MCU_UART1_RXD (MTK_PIN_NO(109) | 5)
+#define PINMUX_GPIO109__FUNC_TP_GPIO9_AO (MTK_PIN_NO(109) | 6)
+#define PINMUX_GPIO109__FUNC_DBG_MON_B3 (MTK_PIN_NO(109) | 7)
+
+#define PINMUX_GPIO110__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define PINMUX_GPIO110__FUNC_SPI1_CLK (MTK_PIN_NO(110) | 1)
+#define PINMUX_GPIO110__FUNC_PWM_0 (MTK_PIN_NO(110) | 2)
+#define PINMUX_GPIO110__FUNC_MD_UCTS0 (MTK_PIN_NO(110) | 3)
+#define PINMUX_GPIO110__FUNC_TP_UCTS1_VLP (MTK_PIN_NO(110) | 4)
+#define PINMUX_GPIO110__FUNC_SPU0_GPIO_O (MTK_PIN_NO(110) | 6)
+#define PINMUX_GPIO110__FUNC_DBG_MON_B4 (MTK_PIN_NO(110) | 7)
+
+#define PINMUX_GPIO111__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define PINMUX_GPIO111__FUNC_SPI1_CSB (MTK_PIN_NO(111) | 1)
+#define PINMUX_GPIO111__FUNC_PWM_1 (MTK_PIN_NO(111) | 2)
+#define PINMUX_GPIO111__FUNC_MD_URTS0 (MTK_PIN_NO(111) | 3)
+#define PINMUX_GPIO111__FUNC_TP_URTS1_VLP (MTK_PIN_NO(111) | 4)
+#define PINMUX_GPIO111__FUNC_SPU0_GPIO_I (MTK_PIN_NO(111) | 6)
+#define PINMUX_GPIO111__FUNC_DBG_MON_B5 (MTK_PIN_NO(111) | 7)
+
+#define PINMUX_GPIO112__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define PINMUX_GPIO112__FUNC_SPI1_MO (MTK_PIN_NO(112) | 1)
+#define PINMUX_GPIO112__FUNC_PWM_2 (MTK_PIN_NO(112) | 2)
+#define PINMUX_GPIO112__FUNC_MD_UCTS1 (MTK_PIN_NO(112) | 3)
+#define PINMUX_GPIO112__FUNC_SPU1_GPIO_O (MTK_PIN_NO(112) | 6)
+#define PINMUX_GPIO112__FUNC_DBG_MON_B6 (MTK_PIN_NO(112) | 7)
+
+#define PINMUX_GPIO113__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define PINMUX_GPIO113__FUNC_SPI1_MI (MTK_PIN_NO(113) | 1)
+#define PINMUX_GPIO113__FUNC_PWM_3 (MTK_PIN_NO(113) | 2)
+#define PINMUX_GPIO113__FUNC_MD_URTS1 (MTK_PIN_NO(113) | 3)
+#define PINMUX_GPIO113__FUNC_SPU1_GPIO_I (MTK_PIN_NO(113) | 6)
+#define PINMUX_GPIO113__FUNC_DBG_MON_B7 (MTK_PIN_NO(113) | 7)
+
+#define PINMUX_GPIO114__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define PINMUX_GPIO114__FUNC_SPI0_SPU_CLK (MTK_PIN_NO(114) | 1)
+#define PINMUX_GPIO114__FUNC_SPI4_A_CLK (MTK_PIN_NO(114) | 2)
+#define PINMUX_GPIO114__FUNC_CONN_BG_GPS_MCU_DBG_UART_TXD (MTK_PIN_NO(114) | 5)
+#define PINMUX_GPIO114__FUNC_DBG_MON_B8 (MTK_PIN_NO(114) | 7)
+
+#define PINMUX_GPIO115__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define PINMUX_GPIO115__FUNC_SPI0_SPU_CSB (MTK_PIN_NO(115) | 1)
+#define PINMUX_GPIO115__FUNC_SPI4_A_CSB (MTK_PIN_NO(115) | 2)
+#define PINMUX_GPIO115__FUNC_DBG_MON_B9 (MTK_PIN_NO(115) | 7)
+
+#define PINMUX_GPIO116__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define PINMUX_GPIO116__FUNC_SPI0_SPU_MO (MTK_PIN_NO(116) | 1)
+#define PINMUX_GPIO116__FUNC_SPI4_A_MO (MTK_PIN_NO(116) | 2)
+#define PINMUX_GPIO116__FUNC_LCM1_RST (MTK_PIN_NO(116) | 3)
+#define PINMUX_GPIO116__FUNC_DBG_MON_B10 (MTK_PIN_NO(116) | 7)
+
+#define PINMUX_GPIO117__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define PINMUX_GPIO117__FUNC_SPI0_SPU_MI (MTK_PIN_NO(117) | 1)
+#define PINMUX_GPIO117__FUNC_SPI4_A_MI (MTK_PIN_NO(117) | 2)
+#define PINMUX_GPIO117__FUNC_DSI1_TE (MTK_PIN_NO(117) | 3)
+#define PINMUX_GPIO117__FUNC_DBG_MON_B11 (MTK_PIN_NO(117) | 7)
+
+#define PINMUX_GPIO118__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define PINMUX_GPIO118__FUNC_SPI5_CLK (MTK_PIN_NO(118) | 1)
+#define PINMUX_GPIO118__FUNC_USB_DRVVBUS (MTK_PIN_NO(118) | 2)
+#define PINMUX_GPIO118__FUNC_DP_TX_HPD (MTK_PIN_NO(118) | 3)
+#define PINMUX_GPIO118__FUNC_AD_ILDO_DTEST0 (MTK_PIN_NO(118) | 4)
+
+#define PINMUX_GPIO119__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define PINMUX_GPIO119__FUNC_SPI5_CSB (MTK_PIN_NO(119) | 1)
+#define PINMUX_GPIO119__FUNC_VBUSVALID (MTK_PIN_NO(119) | 2)
+#define PINMUX_GPIO119__FUNC_DP_OC_EN (MTK_PIN_NO(119) | 3)
+#define PINMUX_GPIO119__FUNC_AD_ILDO_DTEST1 (MTK_PIN_NO(119) | 4)
+
+#define PINMUX_GPIO120__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define PINMUX_GPIO120__FUNC_SPI5_MO (MTK_PIN_NO(120) | 1)
+#define PINMUX_GPIO120__FUNC_LCM2_RST (MTK_PIN_NO(120) | 2)
+#define PINMUX_GPIO120__FUNC_DP_RAUX_SBU1 (MTK_PIN_NO(120) | 3)
+#define PINMUX_GPIO120__FUNC_AD_ILDO_DTEST2 (MTK_PIN_NO(120) | 4)
+#define PINMUX_GPIO120__FUNC_IDDIG_3P (MTK_PIN_NO(120) | 6)
+
+#define PINMUX_GPIO121__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define PINMUX_GPIO121__FUNC_SPI5_MI (MTK_PIN_NO(121) | 1)
+#define PINMUX_GPIO121__FUNC_DSI2_TE (MTK_PIN_NO(121) | 2)
+#define PINMUX_GPIO121__FUNC_DP_RAUX_SBU2 (MTK_PIN_NO(121) | 3)
+#define PINMUX_GPIO121__FUNC_AD_ILDO_DTEST3 (MTK_PIN_NO(121) | 4)
+#define PINMUX_GPIO121__FUNC_USB_DRVVBUS_3P (MTK_PIN_NO(121) | 6)
+#define PINMUX_GPIO121__FUNC_DBG_MON_B17 (MTK_PIN_NO(121) | 7)
+
+#define PINMUX_GPIO122__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define PINMUX_GPIO122__FUNC_AP_GOOD (MTK_PIN_NO(122) | 1)
+#define PINMUX_GPIO122__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(122) | 2)
+
+#define PINMUX_GPIO123__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define PINMUX_GPIO123__FUNC_SCL3 (MTK_PIN_NO(123) | 1)
+#define PINMUX_GPIO123__FUNC_I2SIN2_LRCK (MTK_PIN_NO(123) | 5)
+#define PINMUX_GPIO123__FUNC_TP_UTXD_MD_VCORE (MTK_PIN_NO(123) | 6)
+
+#define PINMUX_GPIO124__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define PINMUX_GPIO124__FUNC_SDA3 (MTK_PIN_NO(124) | 1)
+#define PINMUX_GPIO124__FUNC_TP_URXD_MD_VCORE (MTK_PIN_NO(124) | 6)
+
+#define PINMUX_GPIO125__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define PINMUX_GPIO125__FUNC_MSDC1_CLK (MTK_PIN_NO(125) | 1)
+#define PINMUX_GPIO125__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(125) | 2)
+#define PINMUX_GPIO125__FUNC_HFRP_JTAG0_TCK (MTK_PIN_NO(125) | 3)
+#define PINMUX_GPIO125__FUNC_UDI_TCK (MTK_PIN_NO(125) | 4)
+#define PINMUX_GPIO125__FUNC_CONN_BGF_DSP_L1_JCK (MTK_PIN_NO(125) | 5)
+#define PINMUX_GPIO125__FUNC_SCP_JTAG_LITTLE_TCK_VLP (MTK_PIN_NO(125) | 6)
+#define PINMUX_GPIO125__FUNC_JTCK2_SEL1 (MTK_PIN_NO(125) | 7)
+
+#define PINMUX_GPIO126__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define PINMUX_GPIO126__FUNC_MSDC1_CMD (MTK_PIN_NO(126) | 1)
+#define PINMUX_GPIO126__FUNC_HFRP_JTAG0_TMS (MTK_PIN_NO(126) | 3)
+#define PINMUX_GPIO126__FUNC_UDI_TMS (MTK_PIN_NO(126) | 4)
+#define PINMUX_GPIO126__FUNC_CONN_BGF_DSP_L1_JMS (MTK_PIN_NO(126) | 5)
+#define PINMUX_GPIO126__FUNC_SCP_JTAG_LITTLE_TMS_VLP (MTK_PIN_NO(126) | 6)
+#define PINMUX_GPIO126__FUNC_JTMS2_SEL1 (MTK_PIN_NO(126) | 7)
+
+#define PINMUX_GPIO127__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define PINMUX_GPIO127__FUNC_MSDC1_DAT0 (MTK_PIN_NO(127) | 1)
+#define PINMUX_GPIO127__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(127) | 2)
+#define PINMUX_GPIO127__FUNC_HFRP_JTAG0_TDI (MTK_PIN_NO(127) | 3)
+#define PINMUX_GPIO127__FUNC_UDI_TDI_0 (MTK_PIN_NO(127) | 4)
+#define PINMUX_GPIO127__FUNC_CONN_BGF_DSP_L1_JDI (MTK_PIN_NO(127) | 5)
+#define PINMUX_GPIO127__FUNC_SCP_JTAG_LITTLE_TDI_VLP (MTK_PIN_NO(127) | 6)
+#define PINMUX_GPIO127__FUNC_JTDI2_SEL1 (MTK_PIN_NO(127) | 7)
+
+#define PINMUX_GPIO128__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define PINMUX_GPIO128__FUNC_MSDC1_DAT1 (MTK_PIN_NO(128) | 1)
+#define PINMUX_GPIO128__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(128) | 2)
+#define PINMUX_GPIO128__FUNC_HFRP_JTAG0_TDO (MTK_PIN_NO(128) | 3)
+#define PINMUX_GPIO128__FUNC_UDI_TDO_0 (MTK_PIN_NO(128) | 4)
+#define PINMUX_GPIO128__FUNC_CONN_BGF_DSP_L1_JDO (MTK_PIN_NO(128) | 5)
+#define PINMUX_GPIO128__FUNC_SCP_JTAG_LITTLE_TDO_VLP (MTK_PIN_NO(128) | 6)
+#define PINMUX_GPIO128__FUNC_JTDO2_SEL1 (MTK_PIN_NO(128) | 7)
+
+#define PINMUX_GPIO129__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define PINMUX_GPIO129__FUNC_MSDC1_DAT2 (MTK_PIN_NO(129) | 1)
+#define PINMUX_GPIO129__FUNC_DSI2_HSYNC (MTK_PIN_NO(129) | 2)
+#define PINMUX_GPIO129__FUNC_HFRP_JTAG0_TRSTN (MTK_PIN_NO(129) | 3)
+#define PINMUX_GPIO129__FUNC_UDI_NTRST (MTK_PIN_NO(129) | 4)
+#define PINMUX_GPIO129__FUNC_SCP_JTAG_LITTLE_TRSTN_VLP (MTK_PIN_NO(129) | 6)
+#define PINMUX_GPIO129__FUNC_JTRSTN2_SEL1 (MTK_PIN_NO(129) | 7)
+
+#define PINMUX_GPIO130__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define PINMUX_GPIO130__FUNC_MSDC1_DAT3 (MTK_PIN_NO(130) | 1)
+#define PINMUX_GPIO130__FUNC_DSI3_HSYNC (MTK_PIN_NO(130) | 2)
+#define PINMUX_GPIO130__FUNC_CONN_BGF_DSP_L1_JINTP (MTK_PIN_NO(130) | 5)
+
+#define PINMUX_GPIO131__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define PINMUX_GPIO131__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(131) | 1)
+#define PINMUX_GPIO131__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(131) | 2)
+#define PINMUX_GPIO131__FUNC_MCUPM_JTAG_TDI (MTK_PIN_NO(131) | 3)
+#define PINMUX_GPIO131__FUNC_CLKM0_A (MTK_PIN_NO(131) | 4)
+#define PINMUX_GPIO131__FUNC_CONN_BGF_DSP_L5_JDI (MTK_PIN_NO(131) | 5)
+#define PINMUX_GPIO131__FUNC_TSFDC_SCK (MTK_PIN_NO(131) | 6)
+#define PINMUX_GPIO131__FUNC_SCP_JTAG0_TDI_VCORE (MTK_PIN_NO(131) | 7)
+
+#define PINMUX_GPIO132__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define PINMUX_GPIO132__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(132) | 1)
+#define PINMUX_GPIO132__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(132) | 2)
+#define PINMUX_GPIO132__FUNC_MCUPM_JTAG_TMS (MTK_PIN_NO(132) | 3)
+#define PINMUX_GPIO132__FUNC_CLKM1_B (MTK_PIN_NO(132) | 4)
+#define PINMUX_GPIO132__FUNC_CONN_BGF_DSP_L5_JMS (MTK_PIN_NO(132) | 5)
+#define PINMUX_GPIO132__FUNC_TSFDC_SDI (MTK_PIN_NO(132) | 6)
+#define PINMUX_GPIO132__FUNC_SCP_JTAG0_TMS_VCORE (MTK_PIN_NO(132) | 7)
+
+#define PINMUX_GPIO133__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define PINMUX_GPIO133__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(133) | 1)
+#define PINMUX_GPIO133__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(133) | 2)
+#define PINMUX_GPIO133__FUNC_MCUPM_JTAG_TDO (MTK_PIN_NO(133) | 3)
+#define PINMUX_GPIO133__FUNC_CONN_BGF_DSP_L5_JDO (MTK_PIN_NO(133) | 5)
+#define PINMUX_GPIO133__FUNC_TSFDC_SCF (MTK_PIN_NO(133) | 6)
+#define PINMUX_GPIO133__FUNC_SCP_JTAG0_TDO_VCORE (MTK_PIN_NO(133) | 7)
+
+#define PINMUX_GPIO134__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define PINMUX_GPIO134__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(134) | 1)
+#define PINMUX_GPIO134__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(134) | 2)
+#define PINMUX_GPIO134__FUNC_TSFDC_26M (MTK_PIN_NO(134) | 6)
+
+#define PINMUX_GPIO135__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
+#define PINMUX_GPIO135__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(135) | 1)
+#define PINMUX_GPIO135__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(135) | 2)
+#define PINMUX_GPIO135__FUNC_MCUPM_JTAG_TCK (MTK_PIN_NO(135) | 3)
+#define PINMUX_GPIO135__FUNC_CONN_BGF_DSP_L5_JCK (MTK_PIN_NO(135) | 5)
+#define PINMUX_GPIO135__FUNC_TSFDC_SDO (MTK_PIN_NO(135) | 6)
+#define PINMUX_GPIO135__FUNC_SCP_JTAG0_TCK_VCORE (MTK_PIN_NO(135) | 7)
+
+#define PINMUX_GPIO136__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
+#define PINMUX_GPIO136__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(136) | 1)
+#define PINMUX_GPIO136__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(136) | 2)
+#define PINMUX_GPIO136__FUNC_MCUPM_JTAG_TRSTN (MTK_PIN_NO(136) | 3)
+#define PINMUX_GPIO136__FUNC_CONN_BGF_DSP_L5_JINTP (MTK_PIN_NO(136) | 5)
+#define PINMUX_GPIO136__FUNC_TSFDC_FOUT (MTK_PIN_NO(136) | 6)
+#define PINMUX_GPIO136__FUNC_SCP_JTAG0_TRSTN_VCORE (MTK_PIN_NO(136) | 7)
+
+#define PINMUX_GPIO137__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
+#define PINMUX_GPIO137__FUNC_MIPI0_D_SCLK (MTK_PIN_NO(137) | 1)
+#define PINMUX_GPIO137__FUNC_BPI_BUS16 (MTK_PIN_NO(137) | 2)
+#define PINMUX_GPIO137__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(137) | 4)
+#define PINMUX_GPIO137__FUNC_SPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(137) | 6)
+#define PINMUX_GPIO137__FUNC_DBG_MON_A0 (MTK_PIN_NO(137) | 7)
+
+#define PINMUX_GPIO138__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
+#define PINMUX_GPIO138__FUNC_MIPI0_D_SDATA (MTK_PIN_NO(138) | 1)
+#define PINMUX_GPIO138__FUNC_BPI_BUS17 (MTK_PIN_NO(138) | 2)
+#define PINMUX_GPIO138__FUNC_PCM0_LRCK (MTK_PIN_NO(138) | 4)
+#define PINMUX_GPIO138__FUNC_SPM_JTAG_TCK_VCORE (MTK_PIN_NO(138) | 6)
+#define PINMUX_GPIO138__FUNC_DBG_MON_A1 (MTK_PIN_NO(138) | 7)
+
+#define PINMUX_GPIO139__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
+#define PINMUX_GPIO139__FUNC_MIPI1_D_SCLK (MTK_PIN_NO(139) | 1)
+#define PINMUX_GPIO139__FUNC_BPI_BUS18 (MTK_PIN_NO(139) | 2)
+#define PINMUX_GPIO139__FUNC_MD_GPS_BLANK (MTK_PIN_NO(139) | 4)
+#define PINMUX_GPIO139__FUNC_SPM_JTAG_TMS_VCORE (MTK_PIN_NO(139) | 6)
+#define PINMUX_GPIO139__FUNC_DBG_MON_A2 (MTK_PIN_NO(139) | 7)
+
+#define PINMUX_GPIO140__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
+#define PINMUX_GPIO140__FUNC_MIPI1_D_SDATA (MTK_PIN_NO(140) | 1)
+#define PINMUX_GPIO140__FUNC_BPI_BUS19 (MTK_PIN_NO(140) | 2)
+#define PINMUX_GPIO140__FUNC_MD_URXD1_CONN (MTK_PIN_NO(140) | 4)
+#define PINMUX_GPIO140__FUNC_SPM_JTAG_TDO_VCORE (MTK_PIN_NO(140) | 6)
+#define PINMUX_GPIO140__FUNC_DBG_MON_A3 (MTK_PIN_NO(140) | 7)
+
+#define PINMUX_GPIO141__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
+#define PINMUX_GPIO141__FUNC_MIPI2_D_SCLK (MTK_PIN_NO(141) | 1)
+#define PINMUX_GPIO141__FUNC_BPI_BUS20 (MTK_PIN_NO(141) | 2)
+#define PINMUX_GPIO141__FUNC_MD_UTXD1_CONN (MTK_PIN_NO(141) | 4)
+#define PINMUX_GPIO141__FUNC_SPM_JTAG_TDI_VCORE (MTK_PIN_NO(141) | 6)
+#define PINMUX_GPIO141__FUNC_DBG_MON_A4 (MTK_PIN_NO(141) | 7)
+
+#define PINMUX_GPIO142__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
+#define PINMUX_GPIO142__FUNC_MIPI2_D_SDATA (MTK_PIN_NO(142) | 1)
+#define PINMUX_GPIO142__FUNC_BPI_BUS21 (MTK_PIN_NO(142) | 2)
+#define PINMUX_GPIO142__FUNC_SSPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(142) | 6)
+#define PINMUX_GPIO142__FUNC_DBG_MON_A5 (MTK_PIN_NO(142) | 7)
+
+#define PINMUX_GPIO143__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
+#define PINMUX_GPIO143__FUNC_MIPI3_D_SCLK (MTK_PIN_NO(143) | 1)
+#define PINMUX_GPIO143__FUNC_BPI_BUS22 (MTK_PIN_NO(143) | 2)
+#define PINMUX_GPIO143__FUNC_TP_UTXD_GNSS_VLP (MTK_PIN_NO(143) | 4)
+#define PINMUX_GPIO143__FUNC_MD_UTXD1_CONN (MTK_PIN_NO(143) | 5)
+#define PINMUX_GPIO143__FUNC_SSPM_JTAG_TCK_VCORE (MTK_PIN_NO(143) | 6)
+
+#define PINMUX_GPIO144__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
+#define PINMUX_GPIO144__FUNC_MIPI3_D_SDATA (MTK_PIN_NO(144) | 1)
+#define PINMUX_GPIO144__FUNC_BPI_BUS23 (MTK_PIN_NO(144) | 2)
+#define PINMUX_GPIO144__FUNC_TP_URXD_GNSS_VLP (MTK_PIN_NO(144) | 4)
+#define PINMUX_GPIO144__FUNC_MD_URXD1_CONN (MTK_PIN_NO(144) | 5)
+#define PINMUX_GPIO144__FUNC_SSPM_JTAG_TMS_VCORE (MTK_PIN_NO(144) | 6)
+
+#define PINMUX_GPIO145__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
+#define PINMUX_GPIO145__FUNC_BPI_BUS0 (MTK_PIN_NO(145) | 1)
+#define PINMUX_GPIO145__FUNC_PCIE_WAKEN_1P (MTK_PIN_NO(145) | 4)
+#define PINMUX_GPIO145__FUNC_SSPM_JTAG_TDO_VCORE (MTK_PIN_NO(145) | 6)
+#define PINMUX_GPIO145__FUNC_DBG_MON_A10 (MTK_PIN_NO(145) | 7)
+
+#define PINMUX_GPIO146__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
+#define PINMUX_GPIO146__FUNC_BPI_BUS1 (MTK_PIN_NO(146) | 1)
+#define PINMUX_GPIO146__FUNC_PCIE_PERSTN_1P (MTK_PIN_NO(146) | 4)
+#define PINMUX_GPIO146__FUNC_SSPM_JTAG_TDI_VCORE (MTK_PIN_NO(146) | 6)
+#define PINMUX_GPIO146__FUNC_DBG_MON_A11 (MTK_PIN_NO(146) | 7)
+
+#define PINMUX_GPIO147__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
+#define PINMUX_GPIO147__FUNC_BPI_BUS2 (MTK_PIN_NO(147) | 1)
+#define PINMUX_GPIO147__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(147) | 2)
+#define PINMUX_GPIO147__FUNC_PCIE_CLKREQN_1P (MTK_PIN_NO(147) | 4)
+#define PINMUX_GPIO147__FUNC_SCP_JTAG_LITTLE_TRSTN_VCORE (MTK_PIN_NO(147) | 6)
+#define PINMUX_GPIO147__FUNC_DBG_MON_A12 (MTK_PIN_NO(147) | 7)
+
+#define PINMUX_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
+#define PINMUX_GPIO148__FUNC_BPI_BUS3 (MTK_PIN_NO(148) | 1)
+#define PINMUX_GPIO148__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(148) | 2)
+#define PINMUX_GPIO148__FUNC_TP_UTXD_MD_VLP (MTK_PIN_NO(148) | 4)
+#define PINMUX_GPIO148__FUNC_TP_GPIO0_AO (MTK_PIN_NO(148) | 5)
+#define PINMUX_GPIO148__FUNC_SCP_JTAG_LITTLE_TCK_VCORE (MTK_PIN_NO(148) | 6)
+#define PINMUX_GPIO148__FUNC_DBG_MON_A13 (MTK_PIN_NO(148) | 7)
+
+#define PINMUX_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
+#define PINMUX_GPIO149__FUNC_BPI_BUS4 (MTK_PIN_NO(149) | 1)
+#define PINMUX_GPIO149__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(149) | 2)
+#define PINMUX_GPIO149__FUNC_TP_URXD_MD_VLP (MTK_PIN_NO(149) | 4)
+#define PINMUX_GPIO149__FUNC_TP_GPIO1_AO (MTK_PIN_NO(149) | 5)
+#define PINMUX_GPIO149__FUNC_SCP_JTAG_LITTLE_TMS_VCORE (MTK_PIN_NO(149) | 6)
+#define PINMUX_GPIO149__FUNC_DBG_MON_A14 (MTK_PIN_NO(149) | 7)
+
+#define PINMUX_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
+#define PINMUX_GPIO150__FUNC_BPI_BUS5 (MTK_PIN_NO(150) | 1)
+#define PINMUX_GPIO150__FUNC_GPS_PPS0 (MTK_PIN_NO(150) | 2)
+#define PINMUX_GPIO150__FUNC_TP_GPIO2_AO (MTK_PIN_NO(150) | 5)
+#define PINMUX_GPIO150__FUNC_SCP_JTAG_LITTLE_TDO_VCORE (MTK_PIN_NO(150) | 6)
+#define PINMUX_GPIO150__FUNC_DBG_MON_A15 (MTK_PIN_NO(150) | 7)
+
+#define PINMUX_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
+#define PINMUX_GPIO151__FUNC_BPI_BUS6 (MTK_PIN_NO(151) | 1)
+#define PINMUX_GPIO151__FUNC_GPS_PPS1 (MTK_PIN_NO(151) | 2)
+#define PINMUX_GPIO151__FUNC_TP_GPIO3_AO (MTK_PIN_NO(151) | 5)
+#define PINMUX_GPIO151__FUNC_SCP_JTAG_LITTLE_TDI_VCORE (MTK_PIN_NO(151) | 6)
+
+#define PINMUX_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
+#define PINMUX_GPIO152__FUNC_BPI_BUS7 (MTK_PIN_NO(152) | 1)
+#define PINMUX_GPIO152__FUNC_EDP_TX_HPD (MTK_PIN_NO(152) | 2)
+#define PINMUX_GPIO152__FUNC_AGPS_SYNC (MTK_PIN_NO(152) | 5)
+#define PINMUX_GPIO152__FUNC_SSPM_UTXD_AO_VCORE (MTK_PIN_NO(152) | 6)
+
+#define PINMUX_GPIO153__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
+#define PINMUX_GPIO153__FUNC_MD_UCNT_A_TGL (MTK_PIN_NO(153) | 1)
+#define PINMUX_GPIO153__FUNC_TP_URTS1_VCORE (MTK_PIN_NO(153) | 6)
+#define PINMUX_GPIO153__FUNC_DBG_MON_A8 (MTK_PIN_NO(153) | 7)
+
+#define PINMUX_GPIO154__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
+#define PINMUX_GPIO154__FUNC_DIGRF_IRQ (MTK_PIN_NO(154) | 1)
+#define PINMUX_GPIO154__FUNC_TP_UCTS1_VCORE (MTK_PIN_NO(154) | 6)
+#define PINMUX_GPIO154__FUNC_DBG_MON_A9 (MTK_PIN_NO(154) | 7)
+
+#define PINMUX_GPIO155__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
+#define PINMUX_GPIO155__FUNC_MIPI_M_SCLK (MTK_PIN_NO(155) | 1)
+#define PINMUX_GPIO155__FUNC_UCTS2 (MTK_PIN_NO(155) | 4)
+#define PINMUX_GPIO155__FUNC_TP_UTXD_CONSYS_VCORE (MTK_PIN_NO(155) | 6)
+#define PINMUX_GPIO155__FUNC_DBG_MON_A6 (MTK_PIN_NO(155) | 7)
+
+#define PINMUX_GPIO156__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
+#define PINMUX_GPIO156__FUNC_MIPI_M_SDATA (MTK_PIN_NO(156) | 1)
+#define PINMUX_GPIO156__FUNC_URTS2 (MTK_PIN_NO(156) | 4)
+#define PINMUX_GPIO156__FUNC_TP_URXD_CONSYS_VCORE (MTK_PIN_NO(156) | 6)
+#define PINMUX_GPIO156__FUNC_DBG_MON_A7 (MTK_PIN_NO(156) | 7)
+
+#define PINMUX_GPIO157__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
+#define PINMUX_GPIO157__FUNC_BPI_BUS8 (MTK_PIN_NO(157) | 1)
+#define PINMUX_GPIO157__FUNC_UTXD2 (MTK_PIN_NO(157) | 4)
+#define PINMUX_GPIO157__FUNC_CLKM0_A (MTK_PIN_NO(157) | 5)
+#define PINMUX_GPIO157__FUNC_SSPM_URXD_AO_VCORE (MTK_PIN_NO(157) | 6)
+#define PINMUX_GPIO157__FUNC_DBG_MON_A16 (MTK_PIN_NO(157) | 7)
+
+#define PINMUX_GPIO158__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
+#define PINMUX_GPIO158__FUNC_BPI_BUS9 (MTK_PIN_NO(158) | 1)
+#define PINMUX_GPIO158__FUNC_URXD2 (MTK_PIN_NO(158) | 4)
+#define PINMUX_GPIO158__FUNC_CLKM1_A (MTK_PIN_NO(158) | 5)
+#define PINMUX_GPIO158__FUNC_TP_UTXD1_VCORE (MTK_PIN_NO(158) | 6)
+
+#define PINMUX_GPIO159__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
+#define PINMUX_GPIO159__FUNC_BPI_BUS10 (MTK_PIN_NO(159) | 1)
+#define PINMUX_GPIO159__FUNC_MD_INT0 (MTK_PIN_NO(159) | 2)
+#define PINMUX_GPIO159__FUNC_SRCLKENAI1 (MTK_PIN_NO(159) | 3)
+#define PINMUX_GPIO159__FUNC_CLKM2_A (MTK_PIN_NO(159) | 5)
+#define PINMUX_GPIO159__FUNC_TP_URXD1_VCORE (MTK_PIN_NO(159) | 6)
+
+#define PINMUX_GPIO160__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
+#define PINMUX_GPIO160__FUNC_UTXD0 (MTK_PIN_NO(160) | 1)
+#define PINMUX_GPIO160__FUNC_MD_UTXD1 (MTK_PIN_NO(160) | 2)
+#define PINMUX_GPIO160__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(160) | 5)
+#define PINMUX_GPIO160__FUNC_CONN_BG_GPS_MCU_DBG_UART_TXD (MTK_PIN_NO(160) | 6)
+
+#define PINMUX_GPIO161__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
+#define PINMUX_GPIO161__FUNC_URXD0 (MTK_PIN_NO(161) | 1)
+#define PINMUX_GPIO161__FUNC_MD_URXD1 (MTK_PIN_NO(161) | 2)
+#define PINMUX_GPIO161__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(161) | 5)
+
+#define PINMUX_GPIO162__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
+#define PINMUX_GPIO162__FUNC_UTXD1 (MTK_PIN_NO(162) | 1)
+#define PINMUX_GPIO162__FUNC_MD_UTXD0 (MTK_PIN_NO(162) | 2)
+#define PINMUX_GPIO162__FUNC_TP_UTXD1_VLP (MTK_PIN_NO(162) | 3)
+#define PINMUX_GPIO162__FUNC_ADSP_UTXD0 (MTK_PIN_NO(162) | 4)
+#define PINMUX_GPIO162__FUNC_SSPM_UTXD_AO_VLP (MTK_PIN_NO(162) | 5)
+#define PINMUX_GPIO162__FUNC_HFRP_UTXD1 (MTK_PIN_NO(162) | 6)
+
+#define PINMUX_GPIO163__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
+#define PINMUX_GPIO163__FUNC_URXD1 (MTK_PIN_NO(163) | 1)
+#define PINMUX_GPIO163__FUNC_MD_URXD0 (MTK_PIN_NO(163) | 2)
+#define PINMUX_GPIO163__FUNC_TP_URXD1_VLP (MTK_PIN_NO(163) | 3)
+#define PINMUX_GPIO163__FUNC_ADSP_URXD0 (MTK_PIN_NO(163) | 4)
+#define PINMUX_GPIO163__FUNC_SSPM_URXD_AO_VLP (MTK_PIN_NO(163) | 5)
+#define PINMUX_GPIO163__FUNC_HFRP_URXD1 (MTK_PIN_NO(163) | 6)
+
+#define PINMUX_GPIO164__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
+#define PINMUX_GPIO164__FUNC_SCP_SCL0 (MTK_PIN_NO(164) | 1)
+#define PINMUX_GPIO164__FUNC_TP_GPIO0_AO (MTK_PIN_NO(164) | 6)
+#define PINMUX_GPIO164__FUNC_DBG_MON_A22 (MTK_PIN_NO(164) | 7)
+
+#define PINMUX_GPIO165__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
+#define PINMUX_GPIO165__FUNC_SCP_SDA0 (MTK_PIN_NO(165) | 1)
+#define PINMUX_GPIO165__FUNC_TP_GPIO1_AO (MTK_PIN_NO(165) | 6)
+#define PINMUX_GPIO165__FUNC_DBG_MON_A23 (MTK_PIN_NO(165) | 7)
+
+#define PINMUX_GPIO166__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
+#define PINMUX_GPIO166__FUNC_SCP_SCL2 (MTK_PIN_NO(166) | 1)
+#define PINMUX_GPIO166__FUNC_TP_GPIO2_AO (MTK_PIN_NO(166) | 6)
+#define PINMUX_GPIO166__FUNC_DBG_MON_A24 (MTK_PIN_NO(166) | 7)
+
+#define PINMUX_GPIO167__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
+#define PINMUX_GPIO167__FUNC_SCP_SDA2 (MTK_PIN_NO(167) | 1)
+#define PINMUX_GPIO167__FUNC_TP_GPIO3_AO (MTK_PIN_NO(167) | 6)
+#define PINMUX_GPIO167__FUNC_DBG_MON_A25 (MTK_PIN_NO(167) | 7)
+
+#define PINMUX_GPIO168__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
+#define PINMUX_GPIO168__FUNC_SCP_SPI2_CK (MTK_PIN_NO(168) | 1)
+#define PINMUX_GPIO168__FUNC_SPI2_B_CLK (MTK_PIN_NO(168) | 2)
+#define PINMUX_GPIO168__FUNC_PWM_VLP (MTK_PIN_NO(168) | 3)
+#define PINMUX_GPIO168__FUNC_SCP_SCL2 (MTK_PIN_NO(168) | 4)
+#define PINMUX_GPIO168__FUNC_DBG_MON_A26 (MTK_PIN_NO(168) | 7)
+
+#define PINMUX_GPIO169__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
+#define PINMUX_GPIO169__FUNC_SCP_SPI2_CS (MTK_PIN_NO(169) | 1)
+#define PINMUX_GPIO169__FUNC_SPI2_B_CSB (MTK_PIN_NO(169) | 2)
+#define PINMUX_GPIO169__FUNC_DBG_MON_A27 (MTK_PIN_NO(169) | 7)
+
+#define PINMUX_GPIO170__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
+#define PINMUX_GPIO170__FUNC_SCP_SPI2_MO (MTK_PIN_NO(170) | 1)
+#define PINMUX_GPIO170__FUNC_SPI2_B_MO (MTK_PIN_NO(170) | 2)
+#define PINMUX_GPIO170__FUNC_SCP_SDA2 (MTK_PIN_NO(170) | 4)
+#define PINMUX_GPIO170__FUNC_DBG_MON_A28 (MTK_PIN_NO(170) | 7)
+
+#define PINMUX_GPIO171__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
+#define PINMUX_GPIO171__FUNC_SCP_SPI2_MI (MTK_PIN_NO(171) | 1)
+#define PINMUX_GPIO171__FUNC_SPI2_B_MI (MTK_PIN_NO(171) | 2)
+#define PINMUX_GPIO171__FUNC_DBG_MON_A29 (MTK_PIN_NO(171) | 7)
+
+#define PINMUX_GPIO172__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
+#define PINMUX_GPIO172__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(172) | 1)
+
+#define PINMUX_GPIO173__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
+#define PINMUX_GPIO173__FUNC_CMFLASH3 (MTK_PIN_NO(173) | 1)
+#define PINMUX_GPIO173__FUNC_PWM_3 (MTK_PIN_NO(173) | 2)
+#define PINMUX_GPIO173__FUNC_MD_GPS_L5_BLANK (MTK_PIN_NO(173) | 3)
+#define PINMUX_GPIO173__FUNC_CLKM1_A (MTK_PIN_NO(173) | 4)
+#define PINMUX_GPIO173__FUNC_DBG_MON_A31 (MTK_PIN_NO(173) | 7)
+
+#define PINMUX_GPIO174__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
+#define PINMUX_GPIO174__FUNC_CMFLASH0 (MTK_PIN_NO(174) | 1)
+#define PINMUX_GPIO174__FUNC_PWM_0 (MTK_PIN_NO(174) | 2)
+#define PINMUX_GPIO174__FUNC_VBUSVALID_1P (MTK_PIN_NO(174) | 3)
+#define PINMUX_GPIO174__FUNC_MD32_2_RXD (MTK_PIN_NO(174) | 4)
+#define PINMUX_GPIO174__FUNC_DISP_PWM3 (MTK_PIN_NO(174) | 5)
+
+#define PINMUX_GPIO175__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
+#define PINMUX_GPIO175__FUNC_CMFLASH1 (MTK_PIN_NO(175) | 1)
+#define PINMUX_GPIO175__FUNC_PWM_1 (MTK_PIN_NO(175) | 2)
+#define PINMUX_GPIO175__FUNC_EDP_TX_HPD (MTK_PIN_NO(175) | 3)
+#define PINMUX_GPIO175__FUNC_MD32_2_TXD (MTK_PIN_NO(175) | 4)
+#define PINMUX_GPIO175__FUNC_DISP_PWM4 (MTK_PIN_NO(175) | 5)
+
+#define PINMUX_GPIO176__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
+#define PINMUX_GPIO176__FUNC_SCL5 (MTK_PIN_NO(176) | 1)
+#define PINMUX_GPIO176__FUNC_LCM3_RST (MTK_PIN_NO(176) | 2)
+#define PINMUX_GPIO176__FUNC_MD_URXD1_CONN (MTK_PIN_NO(176) | 4)
+#define PINMUX_GPIO176__FUNC_TP_UTXD_GNSS_VCORE (MTK_PIN_NO(176) | 6)
+
+#define PINMUX_GPIO177__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
+#define PINMUX_GPIO177__FUNC_SDA5 (MTK_PIN_NO(177) | 1)
+#define PINMUX_GPIO177__FUNC_DSI3_TE (MTK_PIN_NO(177) | 2)
+#define PINMUX_GPIO177__FUNC_MD_UTXD1_CONN (MTK_PIN_NO(177) | 4)
+#define PINMUX_GPIO177__FUNC_TP_URXD_GNSS_VCORE (MTK_PIN_NO(177) | 6)
+
+#define PINMUX_GPIO178__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
+#define PINMUX_GPIO178__FUNC_DMIC_CLK (MTK_PIN_NO(178) | 1)
+#define PINMUX_GPIO178__FUNC_SCP_DMIC_CLK (MTK_PIN_NO(178) | 2)
+#define PINMUX_GPIO178__FUNC_SRCLKENAI0 (MTK_PIN_NO(178) | 3)
+#define PINMUX_GPIO178__FUNC_CLKM2_B (MTK_PIN_NO(178) | 4)
+#define PINMUX_GPIO178__FUNC_TP_GPIO7_AO (MTK_PIN_NO(178) | 5)
+#define PINMUX_GPIO178__FUNC_SPU1_UTX (MTK_PIN_NO(178) | 6)
+#define PINMUX_GPIO178__FUNC_DAP_SONIC_SWCK (MTK_PIN_NO(178) | 7)
+
+#define PINMUX_GPIO179__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
+#define PINMUX_GPIO179__FUNC_DMIC_DAT (MTK_PIN_NO(179) | 1)
+#define PINMUX_GPIO179__FUNC_SCP_DMIC_DAT (MTK_PIN_NO(179) | 2)
+#define PINMUX_GPIO179__FUNC_SRCLKENAI1 (MTK_PIN_NO(179) | 3)
+#define PINMUX_GPIO179__FUNC_CLKM3_B (MTK_PIN_NO(179) | 4)
+#define PINMUX_GPIO179__FUNC_TP_GPIO8_AO (MTK_PIN_NO(179) | 5)
+#define PINMUX_GPIO179__FUNC_SPU1_URX (MTK_PIN_NO(179) | 6)
+#define PINMUX_GPIO179__FUNC_DAP_SONIC_SWD (MTK_PIN_NO(179) | 7)
+
+#define PINMUX_GPIO180__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
+#define PINMUX_GPIO180__FUNC_IDDIG_1P (MTK_PIN_NO(180) | 1)
+#define PINMUX_GPIO180__FUNC_CMVREF0 (MTK_PIN_NO(180) | 2)
+#define PINMUX_GPIO180__FUNC_GPS_PPS1 (MTK_PIN_NO(180) | 3)
+#define PINMUX_GPIO180__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(180) | 4)
+#define PINMUX_GPIO180__FUNC_DISP_PWM1 (MTK_PIN_NO(180) | 5)
+
+#define PINMUX_GPIO181__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
+#define PINMUX_GPIO181__FUNC_USB_DRVVBUS_1P (MTK_PIN_NO(181) | 1)
+#define PINMUX_GPIO181__FUNC_CMVREF1 (MTK_PIN_NO(181) | 2)
+#define PINMUX_GPIO181__FUNC_MFG_EB_JTAG_TRSTN (MTK_PIN_NO(181) | 3)
+#define PINMUX_GPIO181__FUNC_ADSP_JTAG1_TRSTN (MTK_PIN_NO(181) | 4)
+#define PINMUX_GPIO181__FUNC_HFRP_JTAG1_TRSTN (MTK_PIN_NO(181) | 5)
+#define PINMUX_GPIO181__FUNC_SPU1_NTRST (MTK_PIN_NO(181) | 6)
+#define PINMUX_GPIO181__FUNC_CONN_BG_GPS_MCU_TRST_B (MTK_PIN_NO(181) | 7)
+
+#define PINMUX_GPIO182__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
+#define PINMUX_GPIO182__FUNC_SCL11 (MTK_PIN_NO(182) | 1)
+#define PINMUX_GPIO182__FUNC_CMVREF2 (MTK_PIN_NO(182) | 2)
+#define PINMUX_GPIO182__FUNC_MFG_EB_JTAG_TCK (MTK_PIN_NO(182) | 3)
+#define PINMUX_GPIO182__FUNC_ADSP_JTAG1_TCK (MTK_PIN_NO(182) | 4)
+#define PINMUX_GPIO182__FUNC_HFRP_JTAG1_TCK (MTK_PIN_NO(182) | 5)
+#define PINMUX_GPIO182__FUNC_SPU1_TCK (MTK_PIN_NO(182) | 6)
+#define PINMUX_GPIO182__FUNC_CONN_BG_GPS_MCU_TCK (MTK_PIN_NO(182) | 7)
+
+#define PINMUX_GPIO183__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
+#define PINMUX_GPIO183__FUNC_SDA11 (MTK_PIN_NO(183) | 1)
+#define PINMUX_GPIO183__FUNC_CMVREF3 (MTK_PIN_NO(183) | 2)
+#define PINMUX_GPIO183__FUNC_MFG_EB_JTAG_TMS (MTK_PIN_NO(183) | 3)
+#define PINMUX_GPIO183__FUNC_ADSP_JTAG1_TMS (MTK_PIN_NO(183) | 4)
+#define PINMUX_GPIO183__FUNC_HFRP_JTAG1_TMS (MTK_PIN_NO(183) | 5)
+#define PINMUX_GPIO183__FUNC_SPU1_TMS (MTK_PIN_NO(183) | 6)
+#define PINMUX_GPIO183__FUNC_CONN_BG_GPS_MCU_TMS (MTK_PIN_NO(183) | 7)
+
+#define PINMUX_GPIO184__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
+#define PINMUX_GPIO184__FUNC_SCL12 (MTK_PIN_NO(184) | 1)
+#define PINMUX_GPIO184__FUNC_CMVREF4 (MTK_PIN_NO(184) | 2)
+#define PINMUX_GPIO184__FUNC_MFG_EB_JTAG_TDO (MTK_PIN_NO(184) | 3)
+#define PINMUX_GPIO184__FUNC_ADSP_JTAG1_TDO (MTK_PIN_NO(184) | 4)
+#define PINMUX_GPIO184__FUNC_HFRP_JTAG1_TDO (MTK_PIN_NO(184) | 5)
+#define PINMUX_GPIO184__FUNC_SPU1_TDO (MTK_PIN_NO(184) | 6)
+#define PINMUX_GPIO184__FUNC_CONN_BG_GPS_MCU_TDO (MTK_PIN_NO(184) | 7)
+
+#define PINMUX_GPIO185__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
+#define PINMUX_GPIO185__FUNC_SDA12 (MTK_PIN_NO(185) | 1)
+#define PINMUX_GPIO185__FUNC_CMVREF5 (MTK_PIN_NO(185) | 2)
+#define PINMUX_GPIO185__FUNC_MFG_EB_JTAG_TDI (MTK_PIN_NO(185) | 3)
+#define PINMUX_GPIO185__FUNC_ADSP_JTAG1_TDI (MTK_PIN_NO(185) | 4)
+#define PINMUX_GPIO185__FUNC_HFRP_JTAG1_TDI (MTK_PIN_NO(185) | 5)
+#define PINMUX_GPIO185__FUNC_SPU1_TDI (MTK_PIN_NO(185) | 6)
+#define PINMUX_GPIO185__FUNC_CONN_BG_GPS_MCU_TDI (MTK_PIN_NO(185) | 7)
+
+#define PINMUX_GPIO186__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
+#define PINMUX_GPIO186__FUNC_MD_GPS_L1_BLANK (MTK_PIN_NO(186) | 1)
+#define PINMUX_GPIO186__FUNC_PMSR_SMAP (MTK_PIN_NO(186) | 2)
+#define PINMUX_GPIO186__FUNC_TP_GPIO2_AO (MTK_PIN_NO(186) | 3)
+
+#define PINMUX_GPIO187__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
+#define PINMUX_GPIO187__FUNC_MD_GPS_L5_BLANK (MTK_PIN_NO(187) | 1)
+#define PINMUX_GPIO187__FUNC_TP_GPIO4_AO (MTK_PIN_NO(187) | 3)
+
+#define PINMUX_GPIO188__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
+#define PINMUX_GPIO188__FUNC_SCL2 (MTK_PIN_NO(188) | 1)
+#define PINMUX_GPIO188__FUNC_SCP_SCL8 (MTK_PIN_NO(188) | 2)
+
+#define PINMUX_GPIO189__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
+#define PINMUX_GPIO189__FUNC_SDA2 (MTK_PIN_NO(189) | 1)
+#define PINMUX_GPIO189__FUNC_SCP_SDA8 (MTK_PIN_NO(189) | 2)
+
+#define PINMUX_GPIO190__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
+#define PINMUX_GPIO190__FUNC_SCL4 (MTK_PIN_NO(190) | 1)
+#define PINMUX_GPIO190__FUNC_SCP_SCL9 (MTK_PIN_NO(190) | 2)
+#define PINMUX_GPIO190__FUNC_UDI_TDI_6 (MTK_PIN_NO(190) | 6)
+
+#define PINMUX_GPIO191__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
+#define PINMUX_GPIO191__FUNC_SDA4 (MTK_PIN_NO(191) | 1)
+#define PINMUX_GPIO191__FUNC_SCP_SDA9 (MTK_PIN_NO(191) | 2)
+#define PINMUX_GPIO191__FUNC_UDI_TDI_7 (MTK_PIN_NO(191) | 6)
+
+#define PINMUX_GPIO192__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
+#define PINMUX_GPIO192__FUNC_CMMCLK2 (MTK_PIN_NO(192) | 1)
+#define PINMUX_GPIO192__FUNC_MD32_3_RXD (MTK_PIN_NO(192) | 4)
+
+#define PINMUX_GPIO193__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
+#define PINMUX_GPIO193__FUNC_CLKM0_B (MTK_PIN_NO(193) | 3)
+#define PINMUX_GPIO193__FUNC_MD32_3_TXD (MTK_PIN_NO(193) | 4)
+#define PINMUX_GPIO193__FUNC_UDI_TDO_7 (MTK_PIN_NO(193) | 6)
+
+#define PINMUX_GPIO194__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
+#define PINMUX_GPIO194__FUNC_SCL7 (MTK_PIN_NO(194) | 1)
+#define PINMUX_GPIO194__FUNC_MD32_3_GPIO0 (MTK_PIN_NO(194) | 2)
+#define PINMUX_GPIO194__FUNC_CLKM2_B (MTK_PIN_NO(194) | 3)
+#define PINMUX_GPIO194__FUNC_UDI_TDI_2 (MTK_PIN_NO(194) | 6)
+
+#define PINMUX_GPIO195__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
+#define PINMUX_GPIO195__FUNC_SDA7 (MTK_PIN_NO(195) | 1)
+#define PINMUX_GPIO195__FUNC_CLKM3_B (MTK_PIN_NO(195) | 3)
+#define PINMUX_GPIO195__FUNC_UDI_TDI_3 (MTK_PIN_NO(195) | 6)
+
+#define PINMUX_GPIO196__FUNC_GPIO196 (MTK_PIN_NO(196) | 0)
+#define PINMUX_GPIO196__FUNC_CMMCLK3 (MTK_PIN_NO(196) | 1)
+
+#define PINMUX_GPIO197__FUNC_GPIO197 (MTK_PIN_NO(197) | 0)
+#define PINMUX_GPIO197__FUNC_CLKM1_B (MTK_PIN_NO(197) | 3)
+#define PINMUX_GPIO197__FUNC_UDI_TDI_1 (MTK_PIN_NO(197) | 6)
+
+#define PINMUX_GPIO198__FUNC_GPIO198 (MTK_PIN_NO(198) | 0)
+#define PINMUX_GPIO198__FUNC_SCL8 (MTK_PIN_NO(198) | 1)
+#define PINMUX_GPIO198__FUNC_UDI_TDI_4 (MTK_PIN_NO(198) | 6)
+
+#define PINMUX_GPIO199__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define PINMUX_GPIO199__FUNC_SDA8 (MTK_PIN_NO(199) | 1)
+#define PINMUX_GPIO199__FUNC_UDI_TDI_5 (MTK_PIN_NO(199) | 6)
+
+#define PINMUX_GPIO200__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define PINMUX_GPIO200__FUNC_SCL1 (MTK_PIN_NO(200) | 1)
+
+#define PINMUX_GPIO201__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define PINMUX_GPIO201__FUNC_SDA1 (MTK_PIN_NO(201) | 1)
+#define PINMUX_GPIO201__FUNC_TSFDC_BG_COMP (MTK_PIN_NO(201) | 7)
+
+#define PINMUX_GPIO202__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define PINMUX_GPIO202__FUNC_SCL9 (MTK_PIN_NO(202) | 1)
+#define PINMUX_GPIO202__FUNC_SCP_SCL7 (MTK_PIN_NO(202) | 2)
+#define PINMUX_GPIO202__FUNC_TP_GPIO15_AO (MTK_PIN_NO(202) | 6)
+
+#define PINMUX_GPIO203__FUNC_GPIO203 (MTK_PIN_NO(203) | 0)
+#define PINMUX_GPIO203__FUNC_SDA9 (MTK_PIN_NO(203) | 1)
+#define PINMUX_GPIO203__FUNC_SCP_SDA7 (MTK_PIN_NO(203) | 2)
+#define PINMUX_GPIO203__FUNC_TP_GPIO9_AO (MTK_PIN_NO(203) | 6)
+
+#define PINMUX_GPIO204__FUNC_GPIO204 (MTK_PIN_NO(204) | 0)
+#define PINMUX_GPIO204__FUNC_SCL13 (MTK_PIN_NO(204) | 1)
+#define PINMUX_GPIO204__FUNC_CMVREF6 (MTK_PIN_NO(204) | 2)
+#define PINMUX_GPIO204__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(204) | 3)
+#define PINMUX_GPIO204__FUNC_CLKM2_B (MTK_PIN_NO(204) | 5)
+#define PINMUX_GPIO204__FUNC_TP_GPIO12_AO (MTK_PIN_NO(204) | 6)
+
+#define PINMUX_GPIO205__FUNC_GPIO205 (MTK_PIN_NO(205) | 0)
+#define PINMUX_GPIO205__FUNC_SDA13 (MTK_PIN_NO(205) | 1)
+#define PINMUX_GPIO205__FUNC_CMVREF7 (MTK_PIN_NO(205) | 2)
+#define PINMUX_GPIO205__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(205) | 3)
+#define PINMUX_GPIO205__FUNC_CLKM3_B (MTK_PIN_NO(205) | 5)
+#define PINMUX_GPIO205__FUNC_TP_GPIO13_AO (MTK_PIN_NO(205) | 6)
+
+#define PINMUX_GPIO206__FUNC_GPIO206 (MTK_PIN_NO(206) | 0)
+#define PINMUX_GPIO206__FUNC_MD32_2_GPIO0 (MTK_PIN_NO(206) | 2)
+#define PINMUX_GPIO206__FUNC_VBUSVALID (MTK_PIN_NO(206) | 5)
+#define PINMUX_GPIO206__FUNC_UDI_TDO_3 (MTK_PIN_NO(206) | 6)
+
+#define PINMUX_GPIO207__FUNC_GPIO207 (MTK_PIN_NO(207) | 0)
+#define PINMUX_GPIO207__FUNC_PCIE_WAKEN_2P (MTK_PIN_NO(207) | 1)
+#define PINMUX_GPIO207__FUNC_PMSR_SMAP_MAX (MTK_PIN_NO(207) | 2)
+#define PINMUX_GPIO207__FUNC_FMI2S_A_BCK (MTK_PIN_NO(207) | 4)
+#define PINMUX_GPIO207__FUNC_UDI_TDO_4 (MTK_PIN_NO(207) | 6)
+
+#define PINMUX_GPIO208__FUNC_GPIO208 (MTK_PIN_NO(208) | 0)
+#define PINMUX_GPIO208__FUNC_PCIE_CLKREQN_2P (MTK_PIN_NO(208) | 1)
+#define PINMUX_GPIO208__FUNC_PMSR_SMAP_MAX_W (MTK_PIN_NO(208) | 2)
+#define PINMUX_GPIO208__FUNC_FMI2S_A_LRCK (MTK_PIN_NO(208) | 4)
+#define PINMUX_GPIO208__FUNC_CLKM0_B (MTK_PIN_NO(208) | 5)
+#define PINMUX_GPIO208__FUNC_UDI_TDO_5 (MTK_PIN_NO(208) | 6)
+
+#define PINMUX_GPIO209__FUNC_GPIO209 (MTK_PIN_NO(209) | 0)
+#define PINMUX_GPIO209__FUNC_PCIE_PERSTN_2P (MTK_PIN_NO(209) | 1)
+#define PINMUX_GPIO209__FUNC_PMSR_SMAP (MTK_PIN_NO(209) | 2)
+#define PINMUX_GPIO209__FUNC_FMI2S_A_DI (MTK_PIN_NO(209) | 4)
+#define PINMUX_GPIO209__FUNC_CLKM1_B (MTK_PIN_NO(209) | 5)
+#define PINMUX_GPIO209__FUNC_UDI_TDO_6 (MTK_PIN_NO(209) | 6)
+
+#define PINMUX_GPIO210__FUNC_GPIO210 (MTK_PIN_NO(210) | 0)
+#define PINMUX_GPIO210__FUNC_CMMCLK4 (MTK_PIN_NO(210) | 1)
+
+#define PINMUX_GPIO211__FUNC_GPIO211 (MTK_PIN_NO(211) | 0)
+#define PINMUX_GPIO211__FUNC_CMMCLK5 (MTK_PIN_NO(211) | 1)
+#define PINMUX_GPIO211__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(211) | 2)
+
+#define PINMUX_GPIO212__FUNC_GPIO212 (MTK_PIN_NO(212) | 0)
+#define PINMUX_GPIO212__FUNC_CMMCLK6 (MTK_PIN_NO(212) | 1)
+#define PINMUX_GPIO212__FUNC_TP_GPIO10_AO (MTK_PIN_NO(212) | 2)
+#define PINMUX_GPIO212__FUNC_IDDIG (MTK_PIN_NO(212) | 5)
+#define PINMUX_GPIO212__FUNC_UDI_TDO_1 (MTK_PIN_NO(212) | 6)
+
+#define PINMUX_GPIO213__FUNC_GPIO213 (MTK_PIN_NO(213) | 0)
+#define PINMUX_GPIO213__FUNC_CMMCLK7 (MTK_PIN_NO(213) | 1)
+#define PINMUX_GPIO213__FUNC_TP_GPIO11_AO (MTK_PIN_NO(213) | 2)
+#define PINMUX_GPIO213__FUNC_USB_DRVVBUS (MTK_PIN_NO(213) | 5)
+#define PINMUX_GPIO213__FUNC_UDI_TDO_2 (MTK_PIN_NO(213) | 6)
+
+#define PINMUX_GPIO214__FUNC_GPIO214 (MTK_PIN_NO(214) | 0)
+#define PINMUX_GPIO214__FUNC_SCP_SCL3 (MTK_PIN_NO(214) | 1)
+#define PINMUX_GPIO214__FUNC_SDA14_E1 (MTK_PIN_NO(214) | 2)
+#define PINMUX_GPIO214__FUNC_SCL14_E2 (MTK_PIN_NO(214) | 2)
+#define PINMUX_GPIO214__FUNC_GBE1_MDC (MTK_PIN_NO(214) | 6)
+#define PINMUX_GPIO214__FUNC_GBE0_MDC (MTK_PIN_NO(214) | 7)
+
+#define PINMUX_GPIO215__FUNC_GPIO215 (MTK_PIN_NO(215) | 0)
+#define PINMUX_GPIO215__FUNC_SCP_SDA3 (MTK_PIN_NO(215) | 1)
+#define PINMUX_GPIO215__FUNC_SCL14_E1 (MTK_PIN_NO(215) | 2)
+#define PINMUX_GPIO215__FUNC_SDA14_E2 (MTK_PIN_NO(215) | 2)
+#define PINMUX_GPIO215__FUNC_GBE1_MDIO (MTK_PIN_NO(215) | 6)
+#define PINMUX_GPIO215__FUNC_GBE0_MDIO (MTK_PIN_NO(215) | 7)
+
+#define PINMUX_GPIO216__FUNC_GPIO216 (MTK_PIN_NO(216) | 0)
+#define PINMUX_GPIO216__FUNC_GPS_PPS0 (MTK_PIN_NO(216) | 1)
+
+#define PINMUX_GPIO217__FUNC_GPIO217 (MTK_PIN_NO(217) | 0)
+#define PINMUX_GPIO217__FUNC_KPROW0 (MTK_PIN_NO(217) | 1)
+#define PINMUX_GPIO217__FUNC_TP_GPIO12_AO (MTK_PIN_NO(217) | 6)
+
+#define PINMUX_GPIO218__FUNC_GPIO218 (MTK_PIN_NO(218) | 0)
+#define PINMUX_GPIO218__FUNC_KPROW1 (MTK_PIN_NO(218) | 1)
+#define PINMUX_GPIO218__FUNC_SPI0_WP (MTK_PIN_NO(218) | 2)
+#define PINMUX_GPIO218__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(218) | 3)
+#define PINMUX_GPIO218__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(218) | 5)
+#define PINMUX_GPIO218__FUNC_TP_GPIO14_AO (MTK_PIN_NO(218) | 6)
+
+#define PINMUX_GPIO219__FUNC_GPIO219 (MTK_PIN_NO(219) | 0)
+#define PINMUX_GPIO219__FUNC_KPCOL1 (MTK_PIN_NO(219) | 1)
+#define PINMUX_GPIO219__FUNC_SPI0_HOLD (MTK_PIN_NO(219) | 2)
+#define PINMUX_GPIO219__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(219) | 3)
+#define PINMUX_GPIO219__FUNC_SPMI_M_TRIG_FLAG (MTK_PIN_NO(219) | 4)
+#define PINMUX_GPIO219__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(219) | 5)
+#define PINMUX_GPIO219__FUNC_SPM_JTAG_TRSTN_VLP (MTK_PIN_NO(219) | 6)
+#define PINMUX_GPIO219__FUNC_JTRSTN_SEL1 (MTK_PIN_NO(219) | 7)
+
+#define PINMUX_GPIO220__FUNC_GPIO220 (MTK_PIN_NO(220) | 0)
+#define PINMUX_GPIO220__FUNC_SPI0_CLK (MTK_PIN_NO(220) | 1)
+#define PINMUX_GPIO220__FUNC_SPM_JTAG_TCK_VLP (MTK_PIN_NO(220) | 6)
+#define PINMUX_GPIO220__FUNC_JTCK_SEL1 (MTK_PIN_NO(220) | 7)
+
+#define PINMUX_GPIO221__FUNC_GPIO221 (MTK_PIN_NO(221) | 0)
+#define PINMUX_GPIO221__FUNC_SPI0_CSB (MTK_PIN_NO(221) | 1)
+#define PINMUX_GPIO221__FUNC_SPM_JTAG_TMS_VLP (MTK_PIN_NO(221) | 6)
+#define PINMUX_GPIO221__FUNC_JTMS_SEL1 (MTK_PIN_NO(221) | 7)
+
+#define PINMUX_GPIO222__FUNC_GPIO222 (MTK_PIN_NO(222) | 0)
+#define PINMUX_GPIO222__FUNC_SPI0_MO (MTK_PIN_NO(222) | 1)
+#define PINMUX_GPIO222__FUNC_SCP_SCL7 (MTK_PIN_NO(222) | 2)
+#define PINMUX_GPIO222__FUNC_SPM_JTAG_TDO_VLP (MTK_PIN_NO(222) | 6)
+#define PINMUX_GPIO222__FUNC_JTDO_SEL1 (MTK_PIN_NO(222) | 7)
+
+#define PINMUX_GPIO223__FUNC_GPIO223 (MTK_PIN_NO(223) | 0)
+#define PINMUX_GPIO223__FUNC_SPI0_MI (MTK_PIN_NO(223) | 1)
+#define PINMUX_GPIO223__FUNC_SCP_SDA7 (MTK_PIN_NO(223) | 2)
+#define PINMUX_GPIO223__FUNC_SPM_JTAG_TDI_VLP (MTK_PIN_NO(223) | 6)
+#define PINMUX_GPIO223__FUNC_JTDI_SEL1 (MTK_PIN_NO(223) | 7)
+
+#define PINMUX_GPIO224__FUNC_GPIO224 (MTK_PIN_NO(224) | 0)
+#define PINMUX_GPIO224__FUNC_MSDC2_CLK (MTK_PIN_NO(224) | 1)
+#define PINMUX_GPIO224__FUNC_DMIC2_CLK (MTK_PIN_NO(224) | 2)
+#define PINMUX_GPIO224__FUNC_GBE0_AUX_PPS0 (MTK_PIN_NO(224) | 3)
+#define PINMUX_GPIO224__FUNC_GBE0_TXER (MTK_PIN_NO(224) | 4)
+#define PINMUX_GPIO224__FUNC_GBE1_TXER (MTK_PIN_NO(224) | 5)
+#define PINMUX_GPIO224__FUNC_GBE1_AUX_PPS0 (MTK_PIN_NO(224) | 6)
+#define PINMUX_GPIO224__FUNC_MD32_1_TXD (MTK_PIN_NO(224) | 7)
+
+#define PINMUX_GPIO225__FUNC_GPIO225 (MTK_PIN_NO(225) | 0)
+#define PINMUX_GPIO225__FUNC_MSDC2_CMD (MTK_PIN_NO(225) | 1)
+#define PINMUX_GPIO225__FUNC_DMIC2_DAT (MTK_PIN_NO(225) | 2)
+#define PINMUX_GPIO225__FUNC_GBE0_AUX_PPS1 (MTK_PIN_NO(225) | 3)
+#define PINMUX_GPIO225__FUNC_GBE0_RXER (MTK_PIN_NO(225) | 4)
+#define PINMUX_GPIO225__FUNC_GBE1_RXER (MTK_PIN_NO(225) | 5)
+#define PINMUX_GPIO225__FUNC_GBE1_AUX_PPS1 (MTK_PIN_NO(225) | 6)
+#define PINMUX_GPIO225__FUNC_MD32_1_RXD (MTK_PIN_NO(225) | 7)
+
+#define PINMUX_GPIO226__FUNC_GPIO226 (MTK_PIN_NO(226) | 0)
+#define PINMUX_GPIO226__FUNC_MSDC2_DAT0 (MTK_PIN_NO(226) | 1)
+#define PINMUX_GPIO226__FUNC_I2SIN3_BCK (MTK_PIN_NO(226) | 2)
+#define PINMUX_GPIO226__FUNC_GBE0_AUX_PPS2 (MTK_PIN_NO(226) | 3)
+#define PINMUX_GPIO226__FUNC_GBE0_COL (MTK_PIN_NO(226) | 4)
+#define PINMUX_GPIO226__FUNC_GBE1_COL (MTK_PIN_NO(226) | 5)
+#define PINMUX_GPIO226__FUNC_GBE1_AUX_PPS2 (MTK_PIN_NO(226) | 6)
+#define PINMUX_GPIO226__FUNC_GBE1_MDC (MTK_PIN_NO(226) | 7)
+
+#define PINMUX_GPIO227__FUNC_GPIO227 (MTK_PIN_NO(227) | 0)
+#define PINMUX_GPIO227__FUNC_MSDC2_DAT1 (MTK_PIN_NO(227) | 1)
+#define PINMUX_GPIO227__FUNC_I2SIN3_LRCK (MTK_PIN_NO(227) | 2)
+#define PINMUX_GPIO227__FUNC_GBE0_AUX_PPS3 (MTK_PIN_NO(227) | 3)
+#define PINMUX_GPIO227__FUNC_GBE0_INTR (MTK_PIN_NO(227) | 4)
+#define PINMUX_GPIO227__FUNC_GBE1_INTR (MTK_PIN_NO(227) | 5)
+#define PINMUX_GPIO227__FUNC_GBE1_AUX_PPS3 (MTK_PIN_NO(227) | 6)
+#define PINMUX_GPIO227__FUNC_GBE1_MDIO (MTK_PIN_NO(227) | 7)
+
+#define PINMUX_GPIO228__FUNC_GPIO228 (MTK_PIN_NO(228) | 0)
+#define PINMUX_GPIO228__FUNC_MSDC2_DAT2 (MTK_PIN_NO(228) | 1)
+#define PINMUX_GPIO228__FUNC_I2SIN3_DI (MTK_PIN_NO(228) | 2)
+#define PINMUX_GPIO228__FUNC_GBE0_MDC (MTK_PIN_NO(228) | 3)
+#define PINMUX_GPIO228__FUNC_GBE1_MDC (MTK_PIN_NO(228) | 4)
+#define PINMUX_GPIO228__FUNC_CONN_BG_GPS_MCU_AICE_TCKC (MTK_PIN_NO(228) | 5)
+
+#define PINMUX_GPIO229__FUNC_GPIO229 (MTK_PIN_NO(229) | 0)
+#define PINMUX_GPIO229__FUNC_MSDC2_DAT3 (MTK_PIN_NO(229) | 1)
+#define PINMUX_GPIO229__FUNC_I2SOUT3_DO (MTK_PIN_NO(229) | 2)
+#define PINMUX_GPIO229__FUNC_GBE0_MDIO (MTK_PIN_NO(229) | 3)
+#define PINMUX_GPIO229__FUNC_GBE1_MDIO (MTK_PIN_NO(229) | 4)
+#define PINMUX_GPIO229__FUNC_CONN_BG_GPS_MCU_AICE_TMSC (MTK_PIN_NO(229) | 5)
+#define PINMUX_GPIO229__FUNC_AVB_CLK2 (MTK_PIN_NO(229) | 7)
+
+#define PINMUX_GPIO230__FUNC_GPIO230 (MTK_PIN_NO(230) | 0)
+#define PINMUX_GPIO230__FUNC_CONN_TOP_CLK (MTK_PIN_NO(230) | 1)
+
+#define PINMUX_GPIO231__FUNC_GPIO231 (MTK_PIN_NO(231) | 0)
+#define PINMUX_GPIO231__FUNC_CONN_TOP_DATA (MTK_PIN_NO(231) | 1)
+
+#define PINMUX_GPIO232__FUNC_GPIO232 (MTK_PIN_NO(232) | 0)
+#define PINMUX_GPIO232__FUNC_CONN_HRST_B (MTK_PIN_NO(232) | 1)
+
+#define PINMUX_GPIO233__FUNC_GPIO233 (MTK_PIN_NO(233) | 0)
+#define PINMUX_GPIO233__FUNC_I2SIN0_BCK (MTK_PIN_NO(233) | 1)
+
+#define PINMUX_GPIO234__FUNC_GPIO234 (MTK_PIN_NO(234) | 0)
+#define PINMUX_GPIO234__FUNC_I2SIN0_LRCK (MTK_PIN_NO(234) | 1)
+
+#define PINMUX_GPIO235__FUNC_GPIO235 (MTK_PIN_NO(235) | 0)
+#define PINMUX_GPIO235__FUNC_I2SIN0_DI (MTK_PIN_NO(235) | 1)
+
+#define PINMUX_GPIO236__FUNC_GPIO236 (MTK_PIN_NO(236) | 0)
+#define PINMUX_GPIO236__FUNC_I2SOUT0_DO (MTK_PIN_NO(236) | 1)
+
+#define PINMUX_GPIO237__FUNC_GPIO237 (MTK_PIN_NO(237) | 0)
+#define PINMUX_GPIO237__FUNC_CONN_UARTHUB_UART_TX (MTK_PIN_NO(237) | 1)
+#define PINMUX_GPIO237__FUNC_UTXD3 (MTK_PIN_NO(237) | 3)
+
+#define PINMUX_GPIO238__FUNC_GPIO238 (MTK_PIN_NO(238) | 0)
+#define PINMUX_GPIO238__FUNC_CONN_UARTHUB_UART_RX (MTK_PIN_NO(238) | 1)
+#define PINMUX_GPIO238__FUNC_URXD3 (MTK_PIN_NO(238) | 3)
+
+#define PINMUX_GPIO239__FUNC_GPIO239 (MTK_PIN_NO(239) | 0)
+#define PINMUX_GPIO239__FUNC_TP_UTXD_CONSYS_VLP (MTK_PIN_NO(239) | 1)
+#define PINMUX_GPIO239__FUNC_TP_URXD_CONSYS_VLP (MTK_PIN_NO(239) | 2)
+
+#define PINMUX_GPIO240__FUNC_GPIO240 (MTK_PIN_NO(240) | 0)
+#define PINMUX_GPIO240__FUNC_TP_URXD_CONSYS_VLP (MTK_PIN_NO(240) | 1)
+#define PINMUX_GPIO240__FUNC_TP_UTXD_CONSYS_VLP (MTK_PIN_NO(240) | 2)
+
+#define PINMUX_GPIO241__FUNC_GPIO241 (MTK_PIN_NO(241) | 0)
+#define PINMUX_GPIO241__FUNC_PCIE_PERSTN (MTK_PIN_NO(241) | 1)
+
+#define PINMUX_GPIO242__FUNC_GPIO242 (MTK_PIN_NO(242) | 0)
+#define PINMUX_GPIO242__FUNC_PCIE_WAKEN (MTK_PIN_NO(242) | 1)
+
+#define PINMUX_GPIO243__FUNC_GPIO243 (MTK_PIN_NO(243) | 0)
+#define PINMUX_GPIO243__FUNC_PCIE_CLKREQN (MTK_PIN_NO(243) | 1)
+
+#define PINMUX_GPIO244__FUNC_GPIO244 (MTK_PIN_NO(244) | 0)
+#define PINMUX_GPIO244__FUNC_CONN_RST (MTK_PIN_NO(244) | 1)
+
+#define PINMUX_GPIO245__FUNC_GPIO245 (MTK_PIN_NO(245) | 0)
+
+#define PINMUX_GPIO246__FUNC_GPIO246 (MTK_PIN_NO(246) | 0)
+#define PINMUX_GPIO246__FUNC_CONN_PTA_TXD0 (MTK_PIN_NO(246) | 1)
+
+#define PINMUX_GPIO247__FUNC_GPIO247 (MTK_PIN_NO(247) | 0)
+#define PINMUX_GPIO247__FUNC_CONN_PTA_RXD0 (MTK_PIN_NO(247) | 1)
+
+#define PINMUX_GPIO248__FUNC_GPIO248 (MTK_PIN_NO(248) | 0)
+#define PINMUX_GPIO248__FUNC_UCTS3 (MTK_PIN_NO(248) | 3)
+
+#define PINMUX_GPIO249__FUNC_GPIO249 (MTK_PIN_NO(249) | 0)
+#define PINMUX_GPIO249__FUNC_URTS3 (MTK_PIN_NO(249) | 3)
+
+#define PINMUX_GPIO250__FUNC_GPIO250 (MTK_PIN_NO(250) | 0)
+
+#define PINMUX_GPIO251__FUNC_GPIO251 (MTK_PIN_NO(251) | 0)
+#define PINMUX_GPIO251__FUNC_IDDIG_1P (MTK_PIN_NO(251) | 1)
+
+#define PINMUX_GPIO252__FUNC_GPIO252 (MTK_PIN_NO(252) | 0)
+#define PINMUX_GPIO252__FUNC_USB_DRVVBUS_1P (MTK_PIN_NO(252) | 1)
+
+#define PINMUX_GPIO253__FUNC_GPIO253 (MTK_PIN_NO(253) | 0)
+#define PINMUX_GPIO253__FUNC_VBUSVALID_1P (MTK_PIN_NO(253) | 1)
+
+#define PINMUX_GPIO254__FUNC_GPIO254 (MTK_PIN_NO(254) | 0)
+#define PINMUX_GPIO254__FUNC_IDDIG_2P (MTK_PIN_NO(254) | 1)
+
+#define PINMUX_GPIO255__FUNC_GPIO255 (MTK_PIN_NO(255) | 0)
+#define PINMUX_GPIO255__FUNC_USB_DRVVBUS_2P (MTK_PIN_NO(255) | 1)
+
+#define PINMUX_GPIO256__FUNC_GPIO256 (MTK_PIN_NO(256) | 0)
+#define PINMUX_GPIO256__FUNC_VBUSVALID_2P (MTK_PIN_NO(256) | 1)
+
+#define PINMUX_GPIO257__FUNC_GPIO257 (MTK_PIN_NO(257) | 0)
+#define PINMUX_GPIO257__FUNC_VBUSVALID_3P (MTK_PIN_NO(257) | 1)
+
+#define PINMUX_GPIO258__FUNC_GPIO258 (MTK_PIN_NO(258) | 0)
+#define PINMUX_GPIO258__FUNC_AVB_CLK1 (MTK_PIN_NO(258) | 7)
+
+#define PINMUX_GPIO259__FUNC_GPIO259 (MTK_PIN_NO(259) | 0)
+#define PINMUX_GPIO259__FUNC_GBE0_TXD0 (MTK_PIN_NO(259) | 1)
+#define PINMUX_GPIO259__FUNC_GBE1_TXD0 (MTK_PIN_NO(259) | 2)
+
+#define PINMUX_GPIO260__FUNC_GPIO260 (MTK_PIN_NO(260) | 0)
+#define PINMUX_GPIO260__FUNC_GBE0_TXD1 (MTK_PIN_NO(260) | 1)
+#define PINMUX_GPIO260__FUNC_GBE1_TXD1 (MTK_PIN_NO(260) | 2)
+
+#define PINMUX_GPIO261__FUNC_GPIO261 (MTK_PIN_NO(261) | 0)
+#define PINMUX_GPIO261__FUNC_GBE0_TXC (MTK_PIN_NO(261) | 1)
+#define PINMUX_GPIO261__FUNC_GBE1_TXC (MTK_PIN_NO(261) | 2)
+
+#define PINMUX_GPIO262__FUNC_GPIO262 (MTK_PIN_NO(262) | 0)
+#define PINMUX_GPIO262__FUNC_GBE0_TXEN (MTK_PIN_NO(262) | 1)
+#define PINMUX_GPIO262__FUNC_GBE1_TXEN (MTK_PIN_NO(262) | 2)
+
+#define PINMUX_GPIO263__FUNC_GPIO263 (MTK_PIN_NO(263) | 0)
+#define PINMUX_GPIO263__FUNC_GBE0_RXD0 (MTK_PIN_NO(263) | 1)
+#define PINMUX_GPIO263__FUNC_GBE1_RXD0 (MTK_PIN_NO(263) | 2)
+#define PINMUX_GPIO263__FUNC_GBE0_AUX_PPS0 (MTK_PIN_NO(263) | 3)
+
+#define PINMUX_GPIO264__FUNC_GPIO264 (MTK_PIN_NO(264) | 0)
+#define PINMUX_GPIO264__FUNC_GBE0_RXD1 (MTK_PIN_NO(264) | 1)
+#define PINMUX_GPIO264__FUNC_GBE1_RXD1 (MTK_PIN_NO(264) | 2)
+#define PINMUX_GPIO264__FUNC_GBE0_AUX_PPS1 (MTK_PIN_NO(264) | 3)
+
+#define PINMUX_GPIO265__FUNC_GPIO265 (MTK_PIN_NO(265) | 0)
+#define PINMUX_GPIO265__FUNC_GBE0_RXC (MTK_PIN_NO(265) | 1)
+#define PINMUX_GPIO265__FUNC_GBE1_RXC (MTK_PIN_NO(265) | 2)
+#define PINMUX_GPIO265__FUNC_GBE0_AUX_PPS2 (MTK_PIN_NO(265) | 3)
+
+#define PINMUX_GPIO266__FUNC_GPIO266 (MTK_PIN_NO(266) | 0)
+#define PINMUX_GPIO266__FUNC_GBE0_RXDV (MTK_PIN_NO(266) | 1)
+#define PINMUX_GPIO266__FUNC_GBE1_RXDV (MTK_PIN_NO(266) | 2)
+#define PINMUX_GPIO266__FUNC_GBE0_AUX_PPS3 (MTK_PIN_NO(266) | 3)
+
+#define PINMUX_GPIO267__FUNC_GPIO267 (MTK_PIN_NO(267) | 0)
+#define PINMUX_GPIO267__FUNC_GBE0_TXD2 (MTK_PIN_NO(267) | 1)
+#define PINMUX_GPIO267__FUNC_GBE1_TXD2 (MTK_PIN_NO(267) | 2)
+#define PINMUX_GPIO267__FUNC_GBE0_RXER (MTK_PIN_NO(267) | 3)
+#define PINMUX_GPIO267__FUNC_GBE1_RXER (MTK_PIN_NO(267) | 4)
+
+#define PINMUX_GPIO268__FUNC_GPIO268 (MTK_PIN_NO(268) | 0)
+#define PINMUX_GPIO268__FUNC_GBE0_TXD3 (MTK_PIN_NO(268) | 1)
+#define PINMUX_GPIO268__FUNC_GBE1_TXD3 (MTK_PIN_NO(268) | 2)
+
+#define PINMUX_GPIO269__FUNC_GPIO269 (MTK_PIN_NO(269) | 0)
+#define PINMUX_GPIO269__FUNC_GBE0_RXD2 (MTK_PIN_NO(269) | 1)
+#define PINMUX_GPIO269__FUNC_GBE1_RXD2 (MTK_PIN_NO(269) | 2)
+#define PINMUX_GPIO269__FUNC_GBE0_MDC (MTK_PIN_NO(269) | 3)
+
+#define PINMUX_GPIO270__FUNC_GPIO270 (MTK_PIN_NO(270) | 0)
+#define PINMUX_GPIO270__FUNC_GBE0_RXD3 (MTK_PIN_NO(270) | 1)
+#define PINMUX_GPIO270__FUNC_GBE1_RXD3 (MTK_PIN_NO(270) | 2)
+#define PINMUX_GPIO270__FUNC_GBE0_MDIO (MTK_PIN_NO(270) | 3)
+
+#endif /* __MT8196_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
new file mode 100644
index 000000000000..c8418888268d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
@@ -0,0 +1,788 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021-2022 BayLibre, SAS.
+ * Authors:
+ * Fabien Parent <fparent@baylibre.com>
+ * Bernhard Rosenkränzer <bero@baylibre.com>
+ * Alexandre Mergnat <amergnat@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
+#include "mt8365.dtsi"
+#include "mt6357.dtsi"
+
+/ {
+	model = "MediaTek MT8365 Open Platform EVK";
+	compatible = "mediatek,mt8365-evk", "mediatek,mt8365";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet = &ethernet;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			hdmi_connector_in: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_connector_out>;
+			};
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
+
+		key-volume-up {
+			gpios = <&pio 24 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0xc0000000>;
+	};
+
+	usb_otg_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	touch0_fixed_3v3: regulator-vio33tp {
+		compatible = "regulator-fixed";
+		regulator-name = "vio33_tp";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vsys>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: secmon@43000000 {
+			no-map;
+			reg = <0 0x43000000 0 0x30000>;
+		};
+
+		/* 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+	};
+
+	sound: sound {
+		compatible = "mediatek,mt8365-mt6357";
+		pinctrl-names = "default",
+				"dmic",
+				"miso_off",
+				"miso_on",
+				"mosi_off",
+				"mosi_on";
+		pinctrl-0 = <&aud_default_pins>;
+		pinctrl-1 = <&aud_dmic_pins>;
+		pinctrl-2 = <&aud_miso_off_pins>;
+		pinctrl-3 = <&aud_miso_on_pins>;
+		pinctrl-4 = <&aud_mosi_off_pins>;
+		pinctrl-5 = <&aud_mosi_on_pins>;
+		mediatek,platform = <&afe>;
+	};
+
+	vsys_lcm_reg: regulator-vsys-lcm {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&pio 129 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "vsys_lcm";
+	};
+
+};
+
+&afe {
+	mediatek,dmic-mode = <1>;
+	status = "okay";
+};
+
+&cpu0 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&dpi0 {
+	pinctrl-0 = <&dpi_default_pins>;
+	pinctrl-1 = <&dpi_idle_pins>;
+	pinctrl-names = "default", "sleep";
+	/*
+	 * Ethernet and HDMI (DPI0) are sharing pins.
+	 * Only one can be enabled at a time and require the physical switch
+	 * SW2101 to be set on LAN position
+	 */
+	status = "disabled";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			dpi0_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&rdma1_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			dpi0_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&it66121_in>;
+			};
+		};
+	};
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "startek,kd070fhfid015";
+		reg = <0>;
+		enable-gpios = <&pio 67 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&mt6357_vsim1_reg>;
+		power-supply = <&vsys_lcm_reg>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			panel_in: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			dsi0_in: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			dsi0_out: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&ethernet {
+	pinctrl-0 = <&ethernet_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy>;
+	phy-mode = "rmii";
+	/*
+	 * Ethernet and HDMI (DPI0) are sharing pins.
+	 * Only one can be enabled at a time and require the physical switch
+	 * SW2101 to be set on LAN position
+	 * mt6357_vibr_reg and mt6357_vsim2_reg are needed to supply ethernet
+	 */
+	status = "disabled";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-div = <2>;
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	it66121_hdmi: hdmi@4c {
+		compatible = "ite,it66121";
+		reg = <0x4c>;
+		#sound-dai-cells = <0>;
+		interrupt-parent = <&pio>;
+		interrupts = <68 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&ite_pins>;
+		pinctrl-names = "default";
+		reset-gpios = <&pio 69 GPIO_ACTIVE_LOW>;
+		vcn18-supply = <&mt6357_vsim2_reg>;
+		vcn33-supply = <&mt6357_vibr_reg>;
+		vrf12-supply = <&mt6357_vrf12_reg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				it66121_in: endpoint@0 {
+					reg = <0>;
+					bus-width = <12>;
+					remote-endpoint = <&dpi0_out>;
+				};
+			};
+
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+				hdmi_connector_out: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupts-extended = <&pio 78 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+		irq-gpios = <&pio 78 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 79 GPIO_ACTIVE_LOW>;
+		AVDD28-supply = <&touch0_fixed_3v3>;
+		VDDIO-supply = <&mt6357_vrf12_reg>;
+	};
+};
+
+&mmc0 {
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	hs400-ds-delay = <0x12012>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&mt6357_vemc_reg>;
+	vqmmc-supply = <&mt6357_vio18_reg>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 76 GPIO_ACTIVE_LOW>;
+	max-frequency = <200000000>;
+	pinctrl-0 = <&mmc1_default_pins>;
+	pinctrl-1 = <&mmc1_uhs_pins>;
+	pinctrl-names = "default", "state_uhs";
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	vmmc-supply = <&mt6357_vmch_reg>;
+	vqmmc-supply = <&mt6357_vmc_reg>;
+	status = "okay";
+};
+
+&mt6357_pmic {
+	interrupts-extended = <&pio 145 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	mediatek,micbias0-microvolt = <1900000>;
+	mediatek,micbias1-microvolt = <1700000>;
+};
+
+&mt6357_vsim1_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&pio {
+	aud_default_pins: audiodefault-pins {
+		clk-dat-pins {
+			pinmux = <MT8365_PIN_72_CMDAT4__FUNC_I2S3_BCK>,
+				 <MT8365_PIN_73_CMDAT5__FUNC_I2S3_LRCK>,
+				 <MT8365_PIN_74_CMDAT6__FUNC_I2S3_MCK>,
+				 <MT8365_PIN_75_CMDAT7__FUNC_I2S3_DO>;
+		};
+	};
+
+	aud_dmic_pins: audiodmic-pins {
+		clk-dat-pins {
+			pinmux = <MT8365_PIN_117_DMIC0_CLK__FUNC_DMIC0_CLK>,
+				 <MT8365_PIN_118_DMIC0_DAT0__FUNC_DMIC0_DAT0>,
+				 <MT8365_PIN_119_DMIC0_DAT1__FUNC_DMIC0_DAT1>;
+		};
+	};
+
+	aud_miso_off_pins: misooff-pins {
+		clk-dat-pins {
+			pinmux = <MT8365_PIN_53_AUD_CLK_MISO__FUNC_GPIO53>,
+				 <MT8365_PIN_54_AUD_SYNC_MISO__FUNC_GPIO54>,
+				 <MT8365_PIN_55_AUD_DAT_MISO0__FUNC_GPIO55>,
+				 <MT8365_PIN_56_AUD_DAT_MISO1__FUNC_GPIO56>;
+			input-enable;
+			bias-pull-down;
+			drive-strength = <2>;
+		};
+	};
+
+	aud_miso_on_pins: misoon-pins {
+		clk-dat-pins {
+			pinmux = <MT8365_PIN_53_AUD_CLK_MISO__FUNC_AUD_CLK_MISO>,
+				 <MT8365_PIN_54_AUD_SYNC_MISO__FUNC_AUD_SYNC_MISO>,
+				 <MT8365_PIN_55_AUD_DAT_MISO0__FUNC_AUD_DAT_MISO0>,
+				 <MT8365_PIN_56_AUD_DAT_MISO1__FUNC_AUD_DAT_MISO1>;
+			drive-strength = <6>;
+		};
+	};
+
+	aud_mosi_off_pins: mosioff-pins {
+		clk-dat-pins {
+			pinmux = <MT8365_PIN_49_AUD_CLK_MOSI__FUNC_GPIO49>,
+				 <MT8365_PIN_50_AUD_SYNC_MOSI__FUNC_GPIO50>,
+				 <MT8365_PIN_51_AUD_DAT_MOSI0__FUNC_GPIO51>,
+				 <MT8365_PIN_52_AUD_DAT_MOSI1__FUNC_GPIO52>;
+			input-enable;
+			bias-pull-down;
+			drive-strength = <2>;
+		};
+	};
+
+	aud_mosi_on_pins: mosion-pins {
+		clk-dat-pins {
+			pinmux = <MT8365_PIN_49_AUD_CLK_MOSI__FUNC_AUD_CLK_MOSI>,
+				 <MT8365_PIN_50_AUD_SYNC_MOSI__FUNC_AUD_SYNC_MOSI>,
+				 <MT8365_PIN_51_AUD_DAT_MOSI0__FUNC_AUD_DAT_MOSI0>,
+				 <MT8365_PIN_52_AUD_DAT_MOSI1__FUNC_AUD_DAT_MOSI1>;
+			drive-strength = <6>;
+		};
+	};
+
+	dpi_default_pins: dpi-default-pins {
+		pins {
+			pinmux = <MT8365_PIN_0_GPIO0__FUNC_DPI_D0>,
+				 <MT8365_PIN_1_GPIO1__FUNC_DPI_D1>,
+				 <MT8365_PIN_2_GPIO2__FUNC_DPI_D2>,
+				 <MT8365_PIN_3_GPIO3__FUNC_DPI_D3>,
+				 <MT8365_PIN_4_GPIO4__FUNC_DPI_D4>,
+				 <MT8365_PIN_5_GPIO5__FUNC_DPI_D5>,
+				 <MT8365_PIN_6_GPIO6__FUNC_DPI_D6>,
+				 <MT8365_PIN_7_GPIO7__FUNC_DPI_D7>,
+				 <MT8365_PIN_8_GPIO8__FUNC_DPI_D8>,
+				 <MT8365_PIN_9_GPIO9__FUNC_DPI_D9>,
+				 <MT8365_PIN_10_GPIO10__FUNC_DPI_D10>,
+				 <MT8365_PIN_11_GPIO11__FUNC_DPI_D11>,
+				 <MT8365_PIN_12_GPIO12__FUNC_DPI_DE>,
+				 <MT8365_PIN_13_GPIO13__FUNC_DPI_VSYNC>,
+				 <MT8365_PIN_14_GPIO14__FUNC_DPI_CK>,
+				 <MT8365_PIN_15_GPIO15__FUNC_DPI_HSYNC>;
+			drive-strength = <4>;
+		};
+	};
+
+	dpi_idle_pins: dpi-idle-pins {
+		pins {
+			pinmux = <MT8365_PIN_0_GPIO0__FUNC_GPIO0>,
+				 <MT8365_PIN_1_GPIO1__FUNC_GPIO1>,
+				 <MT8365_PIN_2_GPIO2__FUNC_GPIO2>,
+				 <MT8365_PIN_3_GPIO3__FUNC_GPIO3>,
+				 <MT8365_PIN_4_GPIO4__FUNC_GPIO4>,
+				 <MT8365_PIN_5_GPIO5__FUNC_GPIO5>,
+				 <MT8365_PIN_6_GPIO6__FUNC_GPIO6>,
+				 <MT8365_PIN_7_GPIO7__FUNC_GPIO7>,
+				 <MT8365_PIN_8_GPIO8__FUNC_GPIO8>,
+				 <MT8365_PIN_9_GPIO9__FUNC_GPIO9>,
+				 <MT8365_PIN_10_GPIO10__FUNC_GPIO10>,
+				 <MT8365_PIN_11_GPIO11__FUNC_GPIO11>,
+				 <MT8365_PIN_12_GPIO12__FUNC_GPIO12>,
+				 <MT8365_PIN_13_GPIO13__FUNC_GPIO13>,
+				 <MT8365_PIN_14_GPIO14__FUNC_GPIO14>,
+				 <MT8365_PIN_15_GPIO15__FUNC_GPIO15>;
+		};
+	};
+
+	ethernet_pins: ethernet-pins {
+		phy_reset_pins {
+			pinmux = <MT8365_PIN_133_TDM_TX_DATA1__FUNC_GPIO133>;
+		};
+
+		rmii_pins {
+			pinmux = <MT8365_PIN_0_GPIO0__FUNC_EXT_TXD0>,
+				 <MT8365_PIN_1_GPIO1__FUNC_EXT_TXD1>,
+				 <MT8365_PIN_2_GPIO2__FUNC_EXT_TXD2>,
+				 <MT8365_PIN_3_GPIO3__FUNC_EXT_TXD3>,
+				 <MT8365_PIN_4_GPIO4__FUNC_EXT_TXC>,
+				 <MT8365_PIN_5_GPIO5__FUNC_EXT_RXER>,
+				 <MT8365_PIN_6_GPIO6__FUNC_EXT_RXC>,
+				 <MT8365_PIN_7_GPIO7__FUNC_EXT_RXDV>,
+				 <MT8365_PIN_8_GPIO8__FUNC_EXT_RXD0>,
+				 <MT8365_PIN_9_GPIO9__FUNC_EXT_RXD1>,
+				 <MT8365_PIN_10_GPIO10__FUNC_EXT_RXD2>,
+				 <MT8365_PIN_11_GPIO11__FUNC_EXT_RXD3>,
+				 <MT8365_PIN_12_GPIO12__FUNC_EXT_TXEN>,
+				 <MT8365_PIN_13_GPIO13__FUNC_EXT_COL>,
+				 <MT8365_PIN_14_GPIO14__FUNC_EXT_MDIO>,
+				 <MT8365_PIN_15_GPIO15__FUNC_EXT_MDC>;
+		};
+	};
+
+	gpio_keys: gpio-keys-pins {
+		pins {
+			pinmux = <MT8365_PIN_24_KPCOL0__FUNC_KPCOL0>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins {
+			pinmux = <MT8365_PIN_57_SDA0__FUNC_SDA0_0>,
+				 <MT8365_PIN_58_SCL0__FUNC_SCL0_0>;
+			bias-pull-up;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins {
+			pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>,
+				 <MT8365_PIN_60_SCL1__FUNC_SCL1_0>;
+			bias-pull-up;
+		};
+	};
+
+	ite_pins: ite-pins {
+		irq_ite_pins {
+			pinmux = <MT8365_PIN_68_CMDAT0__FUNC_GPIO68>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pwr_pins {
+			pinmux = <MT8365_PIN_70_CMDAT2__FUNC_GPIO70>,
+				 <MT8365_PIN_71_CMDAT3__FUNC_GPIO71>;
+			output-high;
+		};
+
+		rst_ite_pins {
+			pinmux = <MT8365_PIN_69_CMDAT1__FUNC_GPIO69>;
+			output-high;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		clk-pins {
+			pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
+			bias-pull-down;
+		};
+
+		cmd-dat-pins {
+			pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+				 <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+				 <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+				 <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+				 <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+				 <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+				 <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+				 <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+				 <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		rst-pins {
+			pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		clk-pins {
+			pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		cmd-dat-pins {
+			pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+				 <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+				 <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+				 <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+				 <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+				 <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+				 <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+				 <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+				 <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		ds-pins {
+			pinmux = <MT8365_PIN_104_MSDC0_DSL__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		rst-pins {
+			pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		cd-pins {
+			pinmux = <MT8365_PIN_76_CMDAT8__FUNC_GPIO76>;
+			bias-pull-up;
+		};
+
+		clk-pins {
+			pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		cmd-dat-pins {
+			pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+				 <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+				 <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+				 <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+				 <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_uhs_pins: mmc1-uhs-pins {
+		clk-pins {
+			pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		cmd-dat-pins {
+			pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+				 <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+				 <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+				 <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+				 <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	touch_pins: touch-pins {
+		ctp-int1-pins {
+			pinmux = <MT8365_PIN_78_CMHSYNC__FUNC_GPIO78>;
+			input-enable;
+			bias-disable;
+		};
+
+		rst-pins {
+			pinmux = <MT8365_PIN_79_CMVSYNC__FUNC_GPIO79>;
+			output-low;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins {
+			pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>,
+				 <MT8365_PIN_36_UTXD0__FUNC_UTXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins {
+			pinmux = <MT8365_PIN_37_URXD1__FUNC_URXD1>,
+				 <MT8365_PIN_38_UTXD1__FUNC_UTXD1>;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins {
+			pinmux = <MT8365_PIN_39_URXD2__FUNC_URXD2>,
+				 <MT8365_PIN_40_UTXD2__FUNC_UTXD2>;
+		};
+	};
+
+	usb_pins: usb-pins {
+		id-pins {
+			pinmux = <MT8365_PIN_17_GPIO17__FUNC_GPIO17>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		usb0-vbus-pins {
+			pinmux = <MT8365_PIN_16_GPIO16__FUNC_USB_DRVVBUS>;
+			output-high;
+		};
+
+		usb1-vbus-pins {
+			pinmux = <MT8365_PIN_18_GPIO18__FUNC_GPIO18>;
+			output-high;
+		};
+	};
+
+	pwm_pins: pwm-pins {
+		pins {
+			pinmux = <MT8365_PIN_19_DISP_PWM__FUNC_PWM_A>,
+				 <MT8365_PIN_116_I2S_BCK__FUNC_PWM_C>;
+		};
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rdma1_out {
+	remote-endpoint = <&dpi0_in>;
+};
+
+&ssusb {
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+	pinctrl-0 = <&usb_pins>;
+	pinctrl-names = "default";
+	usb-role-switch;
+	vusb33-supply = <&mt6357_vusb33_reg>;
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		id-gpios = <&pio 17 GPIO_ACTIVE_HIGH>;
+		type = "micro";
+		vbus-supply = <&usb_otg_vbus>;
+	};
+};
+
+&usb_host {
+	vusb33-supply = <&mt6357_vusb33_reg>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
new file mode 100644
index 000000000000..e6d2b3221a3b
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -0,0 +1,1215 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * (C) 2018 MediaTek Inc.
+ * Copyright (C) 2022 BayLibre SAS
+ * Authors: Fabien Parent <fparent@baylibre.com>
+ *	    Bernhard Rosenkränzer <bero@baylibre.com>
+ *	    Alexandre Mergnat <amergnat@baylibre.com>
+ */
+
+#include <dt-bindings/clock/mediatek,mt8365-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/memory/mediatek,mt8365-larb-port.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/mediatek,mt8365-power.h>
+
+/ {
+	compatible = "mediatek,mt8365";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		aal0 = &aal0;
+		ccorr0 = &ccorr0;
+		color0 = &color0;
+		dither0 = &dither0;
+		dpi0 = &dpi0;
+		dsi0 = &dsi0;
+		gamma0 = &gamma0;
+		ovl0 = &ovl0;
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-850000000 {
+			opp-hz = /bits/ 64 <850000000>;
+			opp-microvolt = <650000>;
+		};
+
+		opp-918000000 {
+			opp-hz = /bits/ 64 <918000000>;
+			opp-microvolt = <668750>;
+		};
+
+		opp-987000000 {
+			opp-hz = /bits/ 64 <987000000>;
+			opp-microvolt = <687500>;
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <706250>;
+		};
+
+		opp-1125000000 {
+			opp-hz = /bits/ 64 <1125000000>;
+			opp-microvolt = <725000>;
+		};
+
+		opp-1216000000 {
+			opp-hz = /bits/ 64 <1216000000>;
+			opp-microvolt = <750000>;
+		};
+
+		opp-1308000000 {
+			opp-hz = /bits/ 64 <1308000000>;
+			opp-microvolt = <775000>;
+		};
+
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-1466000000 {
+			opp-hz = /bits/ 64 <1466000000>;
+			opp-microvolt = <825000>;
+		};
+
+		opp-1533000000 {
+			opp-hz = /bits/ 64 <1533000000>;
+			opp-microvolt = <850000>;
+		};
+
+		opp-1633000000 {
+			opp-hz = /bits/ 64 <1633000000>;
+			opp-microvolt = <887500>;
+		};
+
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <912500>;
+		};
+
+		opp-1767000000 {
+			opp-hz = /bits/ 64 <1767000000>;
+			opp-microvolt = <937500>;
+		};
+
+		opp-1834000000 {
+			opp-hz = /bits/ 64 <1834000000>;
+			opp-microvolt = <962500>;
+		};
+
+		opp-1917000000 {
+			opp-hz = /bits/ 64 <1917000000>;
+			opp-microvolt = <993750>;
+		};
+
+		opp-2001000000 {
+			opp-hz = /bits/ 64 <2001000000>;
+			opp-microvolt = <1025000>;
+		};
+	};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_MCDI &CLUSTER_MCDI &CLUSTER_DPIDLE>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_MCDI &CLUSTER_MCDI &CLUSTER_DPIDLE>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate", "armpll";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_MCDI &CLUSTER_MCDI &CLUSTER_DPIDLE>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate", "armpll";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_MCDI &CLUSTER_MCDI &CLUSTER_DPIDLE>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate", "armpll";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_MCDI: cpu-mcdi {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x00010001>;
+				entry-latency-us = <300>;
+				exit-latency-us = <200>;
+				min-residency-us = <1000>;
+			};
+
+			CLUSTER_MCDI: cluster-mcdi {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x01010001>;
+				entry-latency-us = <350>;
+				exit-latency-us = <250>;
+				min-residency-us = <1200>;
+			};
+
+			CLUSTER_DPIDLE: cluster-dpidle {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x01010004>;
+				entry-latency-us = <300>;
+				exit-latency-us = <800>;
+				min-residency-us = <3300>;
+			};
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+		};
+	};
+
+	clk26m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x10000>, /* GICD */
+			      <0 0x0c080000 0 0x80000>, /* GICR */
+			      <0 0x0c400000 0 0x2000>,  /* GICC */
+			      <0 0x0c410000 0 0x1000>,  /* GICH */
+			      <0 0x0c420000 0 0x2000>;  /* GICV */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8365-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: syscon@10001000 {
+			compatible = "mediatek,mt8365-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8365-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		syscfg_pctl: syscfg-pctl@10005000 {
+			compatible = "mediatek,mt8365-syscfg", "syscon";
+			reg = <0 0x10005000 0 0x1000>;
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8365-scpsys", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8365-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domains of the SoC */
+				power-domain@MT8365_POWER_DOMAIN_MM {
+					reg = <MT8365_POWER_DOMAIN_MM>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>,
+						 <&mmsys CLK_MM_MM_SMI_COMMON>,
+						 <&mmsys CLK_MM_MM_SMI_COMM0>,
+						 <&mmsys CLK_MM_MM_SMI_COMM1>,
+						 <&mmsys CLK_MM_MM_SMI_LARB0>;
+					clock-names = "mm", "mm-0", "mm-1",
+						      "mm-2", "mm-3";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+					mediatek,infracfg-nao = <&infracfg_nao>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@MT8365_POWER_DOMAIN_CAM {
+						reg = <MT8365_POWER_DOMAIN_CAM>;
+						clocks = <&camsys CLK_CAM_LARB2>,
+							 <&camsys CLK_CAM_SENIF>,
+							 <&camsys CLK_CAMSV0>,
+							 <&camsys CLK_CAMSV1>,
+							 <&camsys CLK_CAM_FDVT>,
+							 <&camsys CLK_CAM_WPE>;
+						clock-names = "cam-0", "cam-1",
+							      "cam-2", "cam-3",
+							      "cam-4", "cam-5";
+						#power-domain-cells = <0>;
+						mediatek,infracfg = <&infracfg>;
+						mediatek,smi = <&smi_common>;
+					};
+
+					power-domain@MT8365_POWER_DOMAIN_VDEC {
+						reg = <MT8365_POWER_DOMAIN_VDEC>;
+						#power-domain-cells = <0>;
+						mediatek,smi = <&smi_common>;
+					};
+
+					power-domain@MT8365_POWER_DOMAIN_VENC {
+						reg = <MT8365_POWER_DOMAIN_VENC>;
+						#power-domain-cells = <0>;
+						mediatek,smi = <&smi_common>;
+					};
+
+					power-domain@MT8365_POWER_DOMAIN_APU {
+						reg = <MT8365_POWER_DOMAIN_APU>;
+						clocks = <&infracfg CLK_IFR_APU_AXI>,
+							 <&apu CLK_APU_IPU_CK>,
+							 <&apu CLK_APU_AXI>,
+							 <&apu CLK_APU_JTAG>,
+							 <&apu CLK_APU_IF_CK>,
+							 <&apu CLK_APU_EDMA>,
+							 <&apu CLK_APU_AHB>;
+						clock-names = "apu", "apu-0",
+							      "apu-1", "apu-2",
+							      "apu-3", "apu-4",
+							      "apu-5";
+						#power-domain-cells = <0>;
+						mediatek,infracfg = <&infracfg>;
+						mediatek,smi = <&smi_common>;
+					};
+				};
+
+				power-domain@MT8365_POWER_DOMAIN_CONN {
+					reg = <MT8365_POWER_DOMAIN_CONN>;
+					clocks = <&topckgen CLK_TOP_CONN_32K>,
+						 <&topckgen CLK_TOP_CONN_26M>;
+					clock-names = "conn", "conn1";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+
+				power-domain@MT8365_POWER_DOMAIN_MFG {
+					reg = <MT8365_POWER_DOMAIN_MFG>;
+					clocks = <&topckgen CLK_TOP_MFG_SEL>;
+					clock-names = "mfg";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+
+				power-domain@MT8365_POWER_DOMAIN_AUDIO {
+					reg = <MT8365_POWER_DOMAIN_AUDIO>;
+					clocks = <&topckgen CLK_TOP_AUD_INTBUS_SEL>,
+						 <&infracfg CLK_IFR_AUDIO>,
+						 <&infracfg CLK_IFR_AUD_26M_BK>;
+					clock-names = "audio", "audio1", "audio2";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+
+				power-domain@MT8365_POWER_DOMAIN_DSP {
+					reg = <MT8365_POWER_DOMAIN_DSP>;
+					clocks = <&topckgen CLK_TOP_DSP_SEL>,
+						 <&topckgen CLK_TOP_DSP_26M>;
+					clock-names = "dsp", "dsp1";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+			};
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8365-wdt", "mediatek,mt6589-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1000b000 {
+			compatible = "mediatek,mt8365-pinctrl";
+			reg = <0 0x1000b000 0 0x1000>;
+			mediatek,pctl-regmap = <&syscfg_pctl>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8365-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pwrap: pwrap@1000d000 {
+			compatible = "mediatek,mt8365-pwrap";
+			reg = <0 0x1000d000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_IFR_PWRAP_SPI>,
+				 <&infracfg CLK_IFR_PMIC_AP>,
+				 <&infracfg CLK_IFR_PWRAP_SYS>,
+				 <&infracfg CLK_IFR_PWRAP_TMR>;
+			clock-names = "spi", "wrap", "sys", "tmr";
+		};
+
+		keypad: keypad@10010000 {
+			compatible = "mediatek,mt8365-keypad",
+				     "mediatek,mt6779-keypad";
+			reg = <0 0x10010000 0 0x1000>;
+			wakeup-source;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clk26m>;
+			clock-names = "kpd";
+			status = "disabled";
+		};
+
+		mcucfg: syscon@10200000 {
+			compatible = "mediatek,mt8365-mcucfg", "syscon";
+			reg = <0 0x10200000 0 0x2000>;
+			#clock-cells = <1>;
+		};
+
+		sysirq: interrupt-controller@10200a80 {
+			compatible = "mediatek,mt8365-sysirq", "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200a80 0 0x20>;
+		};
+
+		iommu: iommu@10205000 {
+			compatible = "mediatek,mt8365-m4u";
+			reg = <0 0x10205000 0 0x1000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_LOW>;
+			mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, <&larb3>;
+			#iommu-cells = <1>;
+		};
+
+		infracfg_nao: infracfg@1020e000 {
+			compatible = "mediatek,mt8365-infracfg", "syscon";
+			reg = <0 0x1020e000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		rng: rng@1020f000 {
+			compatible = "mediatek,mt8365-rng", "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg CLK_IFR_TRNG>;
+			clock-names = "rng";
+		};
+
+		apdma: dma-controller@11000280 {
+			compatible = "mediatek,mt8365-uart-dma", "mediatek,mt6577-uart-dma";
+			reg = <0 0x11000280 0 0x80>,
+			      <0 0x11000300 0 0x80>,
+			      <0 0x11000380 0 0x80>,
+			      <0 0x11000400 0 0x80>,
+			      <0 0x11000580 0 0x80>,
+			      <0 0x11000600 0 0x80>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+			dma-requests = <6>;
+			clocks = <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "apdma";
+			#dma-cells = <1>;
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_IFR_UART0>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 0>, <&apdma 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_IFR_UART1>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 2>, <&apdma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_IFR_UART2>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 4>, <&apdma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		pwm: pwm@11006000 {
+			compatible = "mediatek,mt8365-pwm";
+			reg = <0 0x11006000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_IFR_PWM_HCLK>,
+				 <&infracfg CLK_IFR_PWM>,
+				 <&infracfg CLK_IFR_PWM1>,
+				 <&infracfg CLK_IFR_PWM2>,
+				 <&infracfg CLK_IFR_PWM3>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
+		};
+
+		i2c0: i2c@11007000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x11007000 0 0xa0>, <0 0x11000080 0 0x80>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C0_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11008000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x11008000 0 0xa0>, <0 0x11000100 0 0x80>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C1_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11009000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x11009000 0 0xa0>, <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C2_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi: spi@1100a000 {
+			compatible = "mediatek,mt8365-spi", "mediatek,mt7622-spi";
+			reg = <0 0x1100a000 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_IFR_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		disp_pwm: pwm@1100e000 {
+			compatible = "mediatek,mt8365-disp-pwm", "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100e000 0 0x1000>;
+			clock-names = "main", "mm";
+			clocks = <&topckgen CLK_TOP_DISP_PWM_SEL>, <&infracfg CLK_IFR_DISP_PWM>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			#pwm-cells = <2>;
+		};
+
+		i2c3: i2c@1100f000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x1100f000 0 0xa0>, <0 0x11000200 0 0x80>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C3_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ssusb: usb@11201000 {
+			compatible = "mediatek,mt8365-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2e00>, <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_LOW>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u2port1 PHY_TYPE_USB2>;
+			clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
+				 <&infracfg CLK_IFR_SSUSB_REF>,
+				 <&infracfg CLK_IFR_SSUSB_SYS>,
+				 <&infracfg CLK_IFR_ICUSB>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb_host: usb@11200000 {
+				compatible = "mediatek,mt8365-xhci", "mediatek,mtk-xhci";
+				reg = <0 0x11200000 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
+					 <&infracfg CLK_IFR_SSUSB_REF>,
+					 <&infracfg CLK_IFR_SSUSB_SYS>,
+					 <&infracfg CLK_IFR_ICUSB>,
+					 <&infracfg CLK_IFR_SSUSB_XHCI>;
+				clock-names = "sys_ck", "ref_ck", "mcu_ck",
+					      "dma_ck", "xhci_ck";
+				status = "disabled";
+			};
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x1000>,
+			      <0 0x11cd0000 0 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
+				 <&infracfg CLK_IFR_MSDC0_HCLK>,
+				 <&infracfg CLK_IFR_MSDC0_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11c90000 0 0x1000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
+				 <&infracfg CLK_IFR_MSDC1_HCLK>,
+				 <&infracfg CLK_IFR_MSDC1_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc2: mmc@11250000 {
+			compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11250000 0 0x1000>,
+			      <0 0x11c60000 0 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC50_2_SEL>,
+				 <&infracfg CLK_IFR_MSDC2_HCLK>,
+				 <&infracfg CLK_IFR_MSDC2_SRC>,
+				 <&infracfg CLK_IFR_MSDC2_BK>,
+				 <&infracfg CLK_IFR_AP_MSDC0>;
+			clock-names = "source", "hclk", "source_cg",
+				      "bus_clk", "sys_cg";
+			status = "disabled";
+		};
+
+		ethernet: ethernet@112a0000 {
+			compatible = "mediatek,mt8365-eth";
+			reg = <0 0x112a0000 0 0x1000>;
+			mediatek,pericfg = <&infracfg>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_ETH_SEL>,
+				 <&infracfg CLK_IFR_NIC_AXI>,
+				 <&infracfg CLK_IFR_NIC_SLV_AXI>;
+			clock-names = "core", "reg", "trans";
+			status = "disabled";
+		};
+
+		mipi_tx0: dsi-phy@11c00000 {
+			compatible = "mediatek,mt8365-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c00000 0 0x800>;
+			clock-output-names = "mipi_tx0_pll";
+			clocks = <&clk26m>;
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+		};
+
+		u3phy: t-phy@11cc0000 {
+			compatible = "mediatek,mt8365-tphy", "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11cc0000 0x9000>;
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x400>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
+					 <&topckgen CLK_TOP_USB20_48M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u2port1: usb-phy@1000 {
+				reg = <0x1000 0x400>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
+					 <&topckgen CLK_TOP_USB20_48M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt8365-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mmsys_main: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&ovl0_in>;
+				};
+				mmsys_ext: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&rdma1_in>;
+				};
+			};
+		};
+
+		mutex: mutex@14001000 {
+			compatible =  "mediatek,mt8365-disp-mutex";
+			reg = <0 0x14001000 0 0x1000>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+		};
+
+		smi_common: smi@14002000 {
+			compatible = "mediatek,mt8365-smi-common";
+			reg = <0 0x14002000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_MM_SMI_COMM0>,
+				 <&mmsys CLK_MM_MM_SMI_COMM1>;
+			clock-names = "apb", "smi", "gals0", "gals1";
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+		};
+
+		larb0: larb@14003000 {
+			compatible = "mediatek,mt8365-smi-larb",
+				     "mediatek,mt8186-smi-larb";
+			reg = <0 0x14003000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&mmsys CLK_MM_MM_SMI_LARB0>,
+				 <&mmsys CLK_MM_MM_SMI_LARB0>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			mediatek,larb-id = <0>;
+		};
+
+		ovl0: ovl@1400b000 {
+			compatible = "mediatek,mt8365-disp-ovl", "mediatek,mt8192-disp-ovl";
+			reg = <0 0x1400b000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_OVL0>;
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_DISP_OVL0>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					ovl0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mmsys_main>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					ovl0_out: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&rdma0_in>;
+					};
+				};
+			};
+		};
+
+		rdma0: rdma@1400d000 {
+			compatible = "mediatek,mt8365-disp-rdma", "mediatek,mt8183-disp-rdma";
+			reg = <0 0x1400d000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_RDMA0>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+			mediatek,rdma-fifo-size = <5120>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					rdma0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&ovl0_out>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					rdma0_out: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&color0_in>;
+					};
+				};
+			};
+		};
+
+		color0: color@1400f000 {
+			compatible = "mediatek,mt8365-disp-color", "mediatek,mt8173-disp-color";
+			reg = <0 0x1400f000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_COLOR0>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					color0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&rdma0_out>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					color0_out: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&ccorr0_in>;
+					};
+				};
+			};
+		};
+
+		ccorr0: ccorr@14010000 {
+			compatible = "mediatek,mt8365-disp-ccorr", "mediatek,mt8183-disp-ccorr";
+			reg = <0 0x14010000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_CCORR0>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					ccorr0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&color0_out>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					ccorr0_out: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&aal0_in>;
+					};
+				};
+			};
+		};
+
+		aal0: aal@14011000 {
+			compatible = "mediatek,mt8365-disp-aal", "mediatek,mt8183-disp-aal";
+			reg = <0 0x14011000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_AAL0>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					aal0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&ccorr0_out>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					aal0_out: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&gamma0_in>;
+					};
+				};
+			};
+		};
+
+		gamma0: gamma@14012000 {
+			compatible = "mediatek,mt8365-disp-gamma", "mediatek,mt8183-disp-gamma";
+			reg = <0 0x14012000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_GAMMA0>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					gamma0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&aal0_out>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					gamma0_out: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&dither0_in>;
+					};
+				};
+			};
+		};
+
+		dither0: dither@14013000 {
+			compatible = "mediatek,mt8365-disp-dither", "mediatek,mt8183-disp-dither";
+			reg = <0 0x14013000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_DITHER0>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					dither0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&gamma0_out>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					dither0_out: endpoint@0 {
+						reg = <0>;
+					};
+				};
+			};
+		};
+
+		dsi0: dsi@14014000 {
+			compatible = "mediatek,mt8365-dsi", "mediatek,mt8183-dsi";
+			reg = <0 0x14014000 0 0x1000>;
+			clock-names = "engine", "digital", "hs";
+			clocks = <&mmsys CLK_MM_MM_DSI0>,
+				 <&mmsys CLK_MM_DSI0_DIG_DSI>,
+				 <&mipi_tx0>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+			phy-names = "dphy";
+			phys = <&mipi_tx0>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+		};
+
+		rdma1: rdma@14016000 {
+			compatible = "mediatek,mt8365-disp-rdma", "mediatek,mt8183-disp-rdma";
+			reg = <0 0x14016000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_RDMA1>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
+			mediatek,rdma-fifo-size = <2048>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					rdma1_in: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mmsys_ext>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					rdma1_out: endpoint@1 {
+						reg = <1>;
+					};
+				};
+			};
+		};
+
+		dpi0: dpi@14018000 {
+			compatible = "mediatek,mt8365-dpi", "mediatek,mt8192-dpi";
+			reg = <0 0x14018000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DPI0_DPI0>,
+				 <&mmsys CLK_MM_MM_DPI0>,
+				 <&apmixedsys CLK_APMIXED_LVDSPLL>;
+			clock-names = "pixel", "engine", "pll";
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			status = "disabled";
+		};
+
+		camsys: syscon@15000000 {
+			compatible = "mediatek,mt8365-imgsys", "syscon";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb2: larb@15001000 {
+			compatible = "mediatek,mt8365-smi-larb",
+				     "mediatek,mt8186-smi-larb";
+			reg = <0 0x15001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&mmsys CLK_MM_MM_SMI_IMG>,
+				 <&camsys CLK_CAM_LARB2>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+			mediatek,larb-id = <2>;
+		};
+
+		vdecsys: syscon@16000000 {
+			compatible = "mediatek,mt8365-vdecsys", "syscon";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb3: larb@16010000 {
+			compatible = "mediatek,mt8365-smi-larb",
+				     "mediatek,mt8186-smi-larb";
+			reg = <0 0x16010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&vdecsys CLK_VDEC_LARB1>,
+				 <&vdecsys CLK_VDEC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8365_POWER_DOMAIN_VDEC>;
+			mediatek,larb-id = <3>;
+		};
+
+		vencsys: syscon@17000000 {
+			compatible = "mediatek,mt8365-vencsys", "syscon";
+			reg = <0 0x17000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb1: larb@17010000 {
+			compatible = "mediatek,mt8365-smi-larb",
+				     "mediatek,mt8186-smi-larb";
+			reg = <0 0x17010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&vencsys CLK_VENC>, <&vencsys CLK_VENC>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8365_POWER_DOMAIN_VENC>;
+			mediatek,larb-id = <1>;
+		};
+
+		apu: syscon@19020000 {
+			compatible = "mediatek,mt8365-apu", "syscon";
+			reg = <0 0x19020000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		afe: audio-controller@11220000 {
+			compatible = "mediatek,mt8365-afe-pcm";
+			reg = <0 0x11220000 0 0x1000>;
+			#sound-dai-cells = <0>;
+			clocks = <&clk26m>,
+				 <&topckgen CLK_TOP_AUDIO_SEL>,
+				 <&topckgen CLK_TOP_AUD_I2S0_M>,
+				 <&topckgen CLK_TOP_AUD_I2S1_M>,
+				 <&topckgen CLK_TOP_AUD_I2S2_M>,
+				 <&topckgen CLK_TOP_AUD_I2S3_M>,
+				 <&topckgen CLK_TOP_AUD_ENGEN1_SEL>,
+				 <&topckgen CLK_TOP_AUD_ENGEN2_SEL>,
+				 <&topckgen CLK_TOP_AUD_1_SEL>,
+				 <&topckgen CLK_TOP_AUD_2_SEL>,
+				 <&topckgen CLK_TOP_APLL_I2S0_SEL>,
+				 <&topckgen CLK_TOP_APLL_I2S1_SEL>,
+				 <&topckgen CLK_TOP_APLL_I2S2_SEL>,
+				 <&topckgen CLK_TOP_APLL_I2S3_SEL>;
+			clock-names = "top_clk26m_clk",
+				      "top_audio_sel",
+				      "audio_i2s0_m",
+				      "audio_i2s1_m",
+				      "audio_i2s2_m",
+				      "audio_i2s3_m",
+				      "engen1",
+				      "engen2",
+				      "aud1",
+				      "aud2",
+				      "i2s0_m_sel",
+				      "i2s1_m_sel",
+				      "i2s2_m_sel",
+				      "i2s3_m_sel";
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_AUDIO>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	systimer: timer@10017000 {
+		compatible = "mediatek,mt8365-systimer", "mediatek,mt6765-timer";
+		reg = <0 0x10017000 0 0x100>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&system_clk>;
+		clock-names = "clk13m";
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8370-genio-510-evk.dts b/arch/arm64/boot/dts/mediatek/mt8370-genio-510-evk.dts
new file mode 100644
index 000000000000..71a8cbed1df6
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8370-genio-510-evk.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2025 Collabora Ltd.
+ * Author: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ */
+/dts-v1/;
+
+#include "mt8370.dtsi"
+#include "mt8390-genio-common.dtsi"
+
+/ {
+	model = "MediaTek Genio-510 EVK";
+	compatible = "mediatek,mt8370-evk", "mediatek,mt8370", "mediatek,mt8188";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x1 0x00000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8370.dtsi b/arch/arm64/boot/dts/mediatek/mt8370.dtsi
new file mode 100644
index 000000000000..7ac8b8d03494
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8370.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2025 Collabora Ltd.
+ * Author: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ */
+
+/dts-v1/;
+#include "mt8188.dtsi"
+
+/ {
+	compatible = "mediatek,mt8370";
+
+	cpus {
+		/delete-node/ cpu@400;
+		/delete-node/ cpu@500;
+
+		cpu-map {
+			cluster0 {
+				/delete-node/ core4;
+				/delete-node/ core5;
+			};
+		};
+	};
+};
+
+&cpu6 {
+	clock-frequency = <2200000000>;
+};
+
+&cpu7 {
+	clock-frequency = <2200000000>;
+};
+
+&cpu_little0_cooling_map0 {
+	cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+};
+
+&cpu_little1_cooling_map0 {
+	cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+};
+
+&cpu_little2_cooling_map0 {
+	cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+};
+
+&cpu_little3_cooling_map0 {
+	cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+};
+
+/*
+ * Please note that overriding compatibles is a discouraged practice and is a
+ * clear indication of nodes not being, well, compatible!
+ *
+ * This is a special case, where the GPU is the same as MT8188, but with one
+ * of the cores fused out in this lower-binned SoC.
+ */
+&gpu {
+	compatible = "mediatek,mt8370-mali", "arm,mali-valhall-jm";
+
+	power-domains = <&spm MT8188_POWER_DOMAIN_MFG2>,
+			<&spm MT8188_POWER_DOMAIN_MFG3>;
+
+	power-domain-names = "core0", "core1";
+};
+
+&ppi_cluster0 {
+	affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
new file mode 100644
index 000000000000..612336713a64
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Author: Chris Chen <chris-qj.chen@mediatek.com>
+ *	   Pablo Sun <pablo.sun@mediatek.com>
+ *	   Macpaul Lin <macpaul.lin@mediatek.com>
+ */
+/dts-v1/;
+
+#include "mt8188.dtsi"
+#include "mt8390-genio-common.dtsi"
+
+/ {
+	model = "MediaTek Genio-700 EVK";
+	compatible = "mediatek,mt8390-evk", "mediatek,mt8390",
+		     "mediatek,mt8188";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x2 0x00000000>;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
new file mode 100644
index 000000000000..a2cdecd2b903
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
@@ -0,0 +1,1370 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Author: Chris Chen <chris-qj.chen@mediatek.com>
+ *         Pablo Sun <pablo.sun@mediatek.com>
+ *         Macpaul Lin <macpaul.lin@mediatek.com>
+ *
+ * Copyright (C) 2025 Collabora Ltd.
+ *                    Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ *                    AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>   
+ */
+
+#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	aliases {
+		dsi0 = &disp_dsi0;
+		ethernet0 = &eth;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		serial0 = &uart0;
+	};
+
+	backlight_lcm1: backlight-lcm1 {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <576>;
+		num-interpolated-steps = <1023>;
+		power-supply = <&reg_vsys>;
+		pwms = <&disp_pwm1 0 500000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	dmic_codec: dmic-codec {
+		#sound-dai-cells = <0>;
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <30>;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: memory@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x200000>;
+		};
+
+		apu_mem: memory@55000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x55000000 0 0x1400000>; /* 20 MB */
+		};
+
+		vpu_mem: memory@57000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x57000000 0 0x1400000>; /* 20 MB */
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xf00000>;
+			no-map;
+		};
+
+		afe_dma_mem: memory@60f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60f00000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	common_fixed_5v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_vsys>;
+	};
+
+	edp_panel_fixed_3v3: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vedp_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_3v3_en_pins>;
+		vin-supply = <&reg_vsys>;
+	};
+
+	gpio_fixed_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "ext_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_vsys>;
+	};
+
+	/* system wide 4.2V power rail from charger */
+	reg_vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* used by mmc2 */
+	sdio_fixed_1v8: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio18_conn";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	/* used by mmc2 */
+	sdio_fixed_3v3: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "wifi_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 74 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_vsys>;
+	};
+
+	touch0_fixed_3v3: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio33_tp1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 119 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vsys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_vreg_pins>;
+	};
+
+	usb_hub_fixed_3v3: regulator-6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vhub_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 112 GPIO_ACTIVE_HIGH>; /* HUB_3V3_EN */
+		startup-delay-us = <10000>;
+		enable-active-high;
+		vin-supply = <&reg_vsys>;
+	};
+
+	usb_p0_vbus: regulator-7 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_p0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 84 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vsys>;
+	};
+
+	usb_p1_vbus: regulator-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_p1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 87 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vsys>;
+	};
+
+	/* used by ssusb2 */
+	usb_p2_vbus: regulator-9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_p2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
+	lcm1_iovcc: regulator-vio18-lcm1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio18_lcm1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&pio 111 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsi0_vreg_en_pins>;
+		vin-supply = <&reg_vsys>;
+	};
+
+	lcm1_vddp: regulator-vsys-lcm1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_lcm1";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vsys>;
+	};
+};
+
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	status = "okay";
+};
+
+&disp_dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "startek,kd070fhfid078", "himax,hx8279";
+		reg = <0>;
+		backlight = <&backlight_lcm1>;
+		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&lcm1_iovcc>;
+		vdd-supply = <&lcm1_vddp>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_default_pins>;
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+};
+
+&disp_pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm1_pins>;
+	status = "okay";
+};
+
+&dither0_in {
+	remote-endpoint = <&postmask0_out>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&gamma0_out {
+	remote-endpoint = <&postmask0_in>;
+};
+
+&gpu {
+	mali-supply = <&mt6359_vproc2_buck_reg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_RISING>;
+		irq-gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&touch0_fixed_3v3>;
+		VDDIO-supply = <&mt6359_vio18_ldo_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	typec-mux@48 {
+		compatible = "ite,it5205";
+		reg = <0x48>;
+
+		mode-switch;
+		orientation-switch;
+
+		vcc-supply = <&mt6359_vcn33_1_bt_ldo_reg>;
+
+		port {
+			it5205_sbu_mux: endpoint {
+				remote-endpoint = <&typec_sbu_out>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	rt1715@4e {
+		compatible = "richtek,rt1715";
+		reg = <0x4e>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tcpci_int_pins>;
+		vbus-supply = <&usb_p1_vbus>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			op-sink-microwatt = <10000000>;
+			power-role = "dual";
+			try-power-role  = "sink";
+			pd-revision = /bits/ 8 <0x03 0x00 0x01 0x08>;
+
+			sink-pdos = <PDO_FIXED(5000, 2000,
+					       PDO_FIXED_DUAL_ROLE |
+					       PDO_FIXED_DATA_SWAP)>;
+			source-pdos = <PDO_FIXED(5000, 2000,
+						 PDO_FIXED_DUAL_ROLE |
+						 PDO_FIXED_DATA_SWAP)>;
+
+			altmodes {
+				displayport {
+					svid = /bits/ 16 <0xff01>;
+					vdo = <0x001c1c47>;
+				};
+			};
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					typec_con_hs: endpoint {
+						remote-endpoint = <&mtu3_hs1_role_sw>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					typec_con_ss: endpoint {
+						remote-endpoint = <&xhci_ss_ep>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					typec_sbu_out: endpoint {
+						remote-endpoint = <&it5205_sbu_mux>;
+					};
+
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&mfg0 {
+	domain-supply = <&mt6359_vproc2_buck_reg>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+&mipi_tx_config0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x1481b>;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>;
+	pinctrl-1 = <&mmc1_uhs_pins>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	no-mmc;
+	no-sdio;
+	cd-gpios = <&pio 2 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&mt6359_vpa_buck_reg>;
+	vqmmc-supply = <&mt6359_vsim1_ldo_reg>;
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcn18_ldo_reg {
+	regulator-name = "vcn18_pmu";
+	regulator-always-on;
+};
+
+&mt6359_vcn33_2_bt_ldo_reg {
+	regulator-name = "vcn33_2_pmu";
+	regulator-always-on;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-name = "dvdd_proc_l";
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-name = "dvdd_core";
+	regulator-always-on;
+};
+
+&mt6359_vpa_buck_reg {
+	regulator-name = "vpa_pmu";
+	regulator-max-microvolt = <3100000>;
+};
+
+&mt6359_vproc2_buck_reg {
+	/* The name "vgpu" is required by mtk-regulator-coupler */
+	regulator-name = "vgpu";
+	regulator-min-microvolt = <550000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
+	regulator-coupled-max-spread = <6250>;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-name = "dvdd_adsp";
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-name = "va12_abb2_pmu";
+	regulator-always-on;
+};
+
+&mt6359_vsim1_ldo_reg {
+	regulator-name = "vsim1_pmu";
+	regulator-enable-ramp-delay = <480>;
+};
+
+&mt6359_vsram_others_ldo_reg {
+	/* The name "vsram_gpu" is required by mtk-regulator-coupler */
+	regulator-name = "vsram_gpu";
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6359_vproc2_buck_reg>;
+	regulator-coupled-max-spread = <6250>;
+};
+
+&mt6359_vufs_ldo_reg {
+	regulator-name = "vufs18_pmu";
+	regulator-always-on;
+};
+
+&mt6359codec {
+	mediatek,mic-type-0 = <1>; /* ACC */
+	mediatek,mic-type-1 = <3>; /* DCC */
+};
+
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default_pins>;
+	status = "okay";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pio {
+	audio_default_pins: audio-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI>,
+				 <PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1>,
+				 <PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1>,
+				 <PINMUX_GPIO107__FUNC_B0_I2SIN_MCK>,
+				 <PINMUX_GPIO108__FUNC_B0_I2SIN_BCK>,
+				 <PINMUX_GPIO109__FUNC_B0_I2SIN_WS>,
+				 <PINMUX_GPIO110__FUNC_I0_I2SIN_D0>,
+				 <PINMUX_GPIO114__FUNC_O_I2SO2_MCK>,
+				 <PINMUX_GPIO115__FUNC_B0_I2SO2_BCK>,
+				 <PINMUX_GPIO116__FUNC_B0_I2SO2_WS>,
+				 <PINMUX_GPIO117__FUNC_O_I2SO2_D0>,
+				 <PINMUX_GPIO118__FUNC_O_I2SO2_D1>,
+				 <PINMUX_GPIO121__FUNC_B0_PCM_CLK>,
+				 <PINMUX_GPIO122__FUNC_B0_PCM_SYNC>,
+				 <PINMUX_GPIO124__FUNC_I0_PCM_DI>,
+				 <PINMUX_GPIO125__FUNC_O_DMIC1_CLK>,
+				 <PINMUX_GPIO126__FUNC_I0_DMIC1_DAT>,
+				 <PINMUX_GPIO128__FUNC_O_DMIC2_CLK>,
+				 <PINMUX_GPIO129__FUNC_I0_DMIC2_DAT>;
+		};
+	};
+
+	disp_pwm1_pins: disp-pwm1-pins {
+		pins-pwm {
+			pinmux = <PINMUX_GPIO30__FUNC_O_DISP_PWM1>;
+		};
+	};
+
+	dptx_pins: dptx-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO46__FUNC_I0_DP_TX_HPD>;
+			bias-pull-up;
+		};
+	};
+
+	edp_panel_3v3_en_pins: edp-panel-3v3-en-pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO15__FUNC_B_GPIO15>;
+			output-high;
+		};
+	};
+
+	eth_default_pins: eth-default-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>,
+				 <PINMUX_GPIO140__FUNC_I0_GBE_RXC>,
+				 <PINMUX_GPIO141__FUNC_I0_GBE_RXDV>,
+				 <PINMUX_GPIO142__FUNC_O_GBE_TXEN>;
+			drive-strength = <8>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>,
+				 <PINMUX_GPIO144__FUNC_B1_GBE_MDIO>;
+			drive-strength = <8>;
+			input-enable;
+		};
+
+		pins-power {
+			pinmux = <PINMUX_GPIO145__FUNC_B_GPIO145>,
+				 <PINMUX_GPIO146__FUNC_B_GPIO146>;
+			output-high;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>,
+				 <PINMUX_GPIO136__FUNC_I0_GBE_RXD2>,
+				 <PINMUX_GPIO137__FUNC_I0_GBE_RXD1>,
+				 <PINMUX_GPIO138__FUNC_I0_GBE_RXD0>;
+			drive-strength = <8>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>,
+				 <PINMUX_GPIO132__FUNC_O_GBE_TXD2>,
+				 <PINMUX_GPIO133__FUNC_O_GBE_TXD1>,
+				 <PINMUX_GPIO134__FUNC_O_GBE_TXD0>;
+			drive-strength = <8>;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>,
+				 <PINMUX_GPIO140__FUNC_B_GPIO140>,
+				 <PINMUX_GPIO141__FUNC_B_GPIO141>,
+				 <PINMUX_GPIO142__FUNC_B_GPIO142>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>,
+				 <PINMUX_GPIO144__FUNC_B_GPIO144>;
+			input-disable;
+			bias-disable;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>,
+				 <PINMUX_GPIO136__FUNC_B_GPIO136>,
+				 <PINMUX_GPIO137__FUNC_B_GPIO137>,
+				 <PINMUX_GPIO138__FUNC_B_GPIO138>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>,
+				 <PINMUX_GPIO132__FUNC_B_GPIO132>,
+				 <PINMUX_GPIO133__FUNC_B_GPIO133>,
+				 <PINMUX_GPIO134__FUNC_B_GPIO134>;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+				 <PINMUX_GPIO57__FUNC_B1_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins {
+			pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+				 <PINMUX_GPIO59__FUNC_B1_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins {
+			pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+				 <PINMUX_GPIO61__FUNC_B1_SCL3>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins {
+			pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
+				 <PINMUX_GPIO63__FUNC_B1_SCL4>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins {
+			pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
+				 <PINMUX_GPIO65__FUNC_B1_SCL5>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
+				 <PINMUX_GPIO67__FUNC_B1_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	gpio_key_pins: gpio-key-pins {
+		pins {
+			pinmux = <PINMUX_GPIO42__FUNC_B1_KPCOL0>,
+				 <PINMUX_GPIO43__FUNC_B1_KPCOL1>,
+				 <PINMUX_GPIO44__FUNC_B1_KPROW0>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
+				 <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
+				 <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
+				 <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
+				 <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-insert {
+			pinmux = <PINMUX_GPIO2__FUNC_B_GPIO2>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_uhs_pins: mmc1-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
+				 <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
+				 <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
+				 <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
+				 <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc2_default_pins: mmc2-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
+			drive-strength = <4>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
+				 <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
+				 <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
+				 <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
+				 <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-pcm {
+			pinmux = <PINMUX_GPIO123__FUNC_O_PCM_DO>;
+		};
+	};
+
+	mmc2_uhs_pins: mmc2-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
+			drive-strength = <4>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
+				 <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
+				 <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
+				 <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
+				 <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc2_eint_pins: mmc2-eint-pins {
+		pins-dat1 {
+			pinmux = <PINMUX_GPIO172__FUNC_B_GPIO172>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc2_dat1_pins: mmc2-dat1-pins {
+		pins-dat1 {
+			pinmux = <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	dsi0_vreg_en_pins: dsi0-vreg-en-pins {
+		pins-pwr-en {
+			pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>;
+			output-low;
+		};
+	};
+
+	panel_default_pins: panel-default-pins {
+		pins-rst {
+			pinmux = <PINMUX_GPIO25__FUNC_B_GPIO25>;
+			output-low;
+		};
+
+		pins-en {
+			pinmux = <PINMUX_GPIO45__FUNC_B_GPIO45>;
+			output-low;
+		};
+	};
+
+	pcie_default_pins: pcie-default-pins {
+		pins {
+			pinmux = <PINMUX_GPIO47__FUNC_I1_WAKEN>,
+				 <PINMUX_GPIO48__FUNC_O_PERSTN>,
+				 <PINMUX_GPIO49__FUNC_B1_CLKREQN>;
+			bias-pull-up;
+		};
+	};
+
+	rt1715_int_pins: rt1715-int-pins {
+		pins_cmd0_dat {
+			pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	spi0_pins: spi0-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
+				<PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
+				<PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
+				<PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+				<PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+				<PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
+				<PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
+				<PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
+				<PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
+				<PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
+			bias-disable;
+		};
+	};
+
+	touch_vreg_pins: touch-avdd-pins {
+		pins-power {
+			pinmux = <PINMUX_GPIO120__FUNC_B_GPIO120>;
+			output-high;
+		};
+	};
+
+	touch_pins: touch-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO6__FUNC_B_GPIO6>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO5__FUNC_B_GPIO5>;
+			output-high;
+		};
+	};
+
+	tcpci_int_pins: tcpci-int-pins {
+		pins-int-n {
+			pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
+			bias-pull-up;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO33__FUNC_O_UTXD1>,
+				 <PINMUX_GPIO34__FUNC_I1_URXD1>;
+			bias-pull-up;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins {
+			pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>,
+				 <PINMUX_GPIO36__FUNC_I1_URXD2>;
+			bias-pull-up;
+		};
+	};
+
+	usb_default_pins: usb-default-pins {
+		pins-iddig {
+			pinmux = <PINMUX_GPIO83__FUNC_B_GPIO83>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-valid {
+			pinmux = <PINMUX_GPIO85__FUNC_I0_VBUSVALID>;
+			input-enable;
+		};
+
+		pins-vbus {
+			pinmux = <PINMUX_GPIO84__FUNC_O_USB_DRVVBUS>;
+			output-high;
+		};
+
+	};
+
+	usb1_default_pins: usb1-default-pins {
+		pins-valid {
+			pinmux = <PINMUX_GPIO88__FUNC_I0_VBUSVALID_1P>;
+			input-enable;
+		};
+
+		pins-usb-hub-3v3-en {
+			pinmux = <PINMUX_GPIO112__FUNC_B_GPIO112>;
+			output-high;
+		};
+	};
+
+	usb2_default_pins: usb2-default-pins {
+		pins-iddig {
+			pinmux = <PINMUX_GPIO89__FUNC_B_GPIO89>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	wifi_pwrseq_pins: wifi-pwrseq-pins {
+		pins-wifi-enable {
+			pinmux = <PINMUX_GPIO127__FUNC_B_GPIO127>;
+			output-low;
+		};
+	};
+};
+
+&eth {
+	phy-mode ="rgmii-id";
+	phy-handle = <&ethernet_phy0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	mediatek,mac-wol;
+	snps,reset-gpio = <&pio 147 GPIO_ACTIVE_HIGH>;
+	snps,reset-delays-us = <0 10000 10000>;
+	status = "okay";
+};
+
+&eth_mdio {
+	ethernet_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+	};
+};
+
+&pmic {
+	interrupt-parent = <&pio>;
+	interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
+
+	mt6359keys: keys {
+		compatible = "mediatek,mt6359-keys";
+		mediatek,long-press-mode = <1>;
+		power-off-time-sec = <0>;
+
+		power-key {
+			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		home {
+			linux,keycodes = <KEY_HOME>;
+		};
+	};
+};
+
+&postmask0_in {
+	remote-endpoint = <&gamma0_out>;
+};
+
+&postmask0_out {
+	remote-endpoint = <&dither0_in>;
+};
+
+&scp_cluster {
+	status = "okay";
+};
+
+&scp_c0 {
+	memory-region = <&scp_mem>;
+	status = "okay";
+};
+
+&sound {
+	compatible = "mediatek,mt8390-mt6359-evk", "mediatek,mt8188-mt6359-evb";
+	model = "mt8390-evk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_default_pins>;
+	audio-routing =
+		"Headphone", "Headphone L",
+		"Headphone", "Headphone R",
+		"DMIC_INPUT", "AP DMIC",
+		"AP DMIC", "AUDGLB",
+		"AP DMIC", "MIC_BIAS_0",
+		"AP DMIC", "MIC_BIAS_2";
+	mediatek,adsp = <&adsp>;
+	status = "okay";
+
+	dai-link-0 {
+		link-name = "DL_SRC_BE";
+
+		codec {
+			sound-dai = <&pmic 0>;
+		};
+	};
+
+	dai-link-1 {
+		link-name = "DMIC_BE";
+
+		codec {
+			sound-dai = <&dmic_codec>;
+		};
+	};
+};
+
+&spi2 {
+	pinctrl-0 = <&spi2_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&ssusb0 {
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+	usb-role-switch;
+	wakeup-source;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	pinctrl-0 = <&usb_default_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 83 GPIO_ACTIVE_HIGH>;
+		vbus-supply = <&usb_p0_vbus>;
+	};
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&ssusb1 {
+	dr_mode = "otg";
+	usb-role-switch;
+	wakeup-source;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	pinctrl-0 = <&usb1_default_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	port {
+		mtu3_hs1_role_sw: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&xhci1 {
+	status = "okay";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8025";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&usb_hub_fixed_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8027";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&usb_hub_fixed_3v3>;
+	};
+
+	port {
+		xhci_ss_ep: endpoint {
+			remote-endpoint = <&typec_con_ss>;
+		};
+	};
+};
+
+&ssusb2 {
+	/*
+	 * the ssusb2 controller is one but we got two ports : one is routed
+	 * to the M.2 slot, the other is on the RPi header who does support
+	 * full OTG.
+	 * As the controller is shared between them, the role switch default
+	 * mode is set to host to make any peripheral inserted in the M.2
+	 * slot (i.e BT/WIFI module) be detected when the other port is
+	 * unused.
+	 */
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+	role-switch-default-mode = "host";
+	usb-role-switch;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	wakeup-source;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_default_pins>;
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 89 GPIO_ACTIVE_LOW>;
+		vbus-supply = <&usb_p2_vbus>;
+	};
+};
+
+&xhci2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&sdio_fixed_3v3>; /* wifi_3v3 */
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
new file mode 100644
index 000000000000..cf8cd37f5708
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
@@ -0,0 +1,1202 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Author: Ben Lok <ben.lok@mediatek.com>
+ *	   Macpaul Lin <macpaul.lin@mediatek.com>
+ */
+/dts-v1/;
+
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	model = "MediaTek Genio 1200 EVK-P1V2-EMMC";
+	compatible = "mediatek,mt8395-evk", "mediatek,mt8395",
+		     "mediatek,mt8195";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &eth;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x2 0x00000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		vpu_mem: memory@53000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_mem: memory@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x200000>;
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xf00000>;
+			no-map;
+		};
+
+		afe_dma_mem: memory@60f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60f00000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
+			no-map;
+		};
+
+		apu_mem: memory@62000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
+		};
+	};
+
+	backlight_lcm0: backlight-lcm0 {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <576>;
+		num-interpolated-steps = <1023>;
+		pwms = <&disp_pwm0 0 500000>;
+	};
+
+	backlight_lcd1: backlight-lcd1 {
+		compatible = "pwm-backlight";
+		pwms = <&disp_pwm1 0 500000>;
+		enable-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 1023>;
+		num-interpolated-steps = <1023>;
+		default-brightness-level = <576>;
+		status = "disabled";
+	};
+
+	can_clk: can-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+		clock-output-names = "can-clk";
+	};
+
+	edp_panel_fixed_3v3: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "edp_panel_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_3v3_en_pins>;
+	};
+
+	edp_panel_fixed_12v: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "edp_backlight_12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		enable-active-high;
+		gpio = <&pio 96 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_12v_en_pins>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		button-volume-up {
+			wakeup-source;
+			debounce-interval = <100>;
+			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	lcm0_iovcc: regulator-vio18-lcm0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio18_lcm0";
+		enable-active-high;
+		gpio = <&pio 47 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsi0_vreg_en_pins>;
+		vin-supply = <&mt6360_ldo2>;
+	};
+
+	lcm0_vddp: regulator-vsys-lcm0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_lcm0";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&mt6360_ldo1>;
+	};
+
+	wifi_fixed_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wifi_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	status = "okay";
+};
+
+&disp_pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm0_pins>;
+	status = "okay";
+};
+
+&dither0_in {
+	remote-endpoint = <&gamma0_out>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&dmic_codec {
+	wakeup-delay-ms = <200>;
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "startek,kd070fhfid078", "himax,hx8279";
+		reg = <0>;
+		backlight = <&backlight_lcm0>;
+		enable-gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 108 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&lcm0_iovcc>;
+		vdd-supply = <&lcm0_vddp>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_default_pins>;
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+};
+
+&eth {
+	phy-mode ="rgmii-rxid";
+	phy-handle = <&eth_phy0>;
+	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
+	snps,reset-delays-us = <0 10000 10000>;
+	mediatek,tx-delay-ps = <2030>;
+	mediatek,mac-wol;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		eth_phy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <0x1>;
+		};
+	};
+};
+
+&gamma0_out {
+	remote-endpoint = <&dither0_in>;
+};
+
+&gpu {
+	mali-supply = <&mt6315_7_vbuck1>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>;
+		irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&mt6360_ldo1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	typec-mux@48 {
+		compatible = "ite,it5205";
+		reg = <0x48>;
+		vcc-supply = <&mt6359_vibr_ldo_reg>;
+		mode-switch;
+		orientation-switch;
+		status = "okay";
+
+		port {
+			it5205_sbu_ep: endpoint {
+				remote-endpoint = <&mt6360_ssusb_sbu_ep>;
+			};
+		};
+	};
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c6_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	mt6360: pmic@34 {
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		interrupt-parent = <&pio>;
+		interrupts = <128 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "IRQB";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		pinctrl-0 = <&mt6360_pins>;
+
+		charger {
+			compatible = "mediatek,mt6360-chg";
+			richtek,vinovp-microvolt = <14500000>;
+
+			otg_vbus_regulator: usb-otg-vbus-regulator {
+				regulator-name = "usb-otg-vbus";
+				regulator-min-microvolt = <4425000>;
+				regulator-max-microvolt = <5825000>;
+			};
+		};
+
+		regulator {
+			compatible = "mediatek,mt6360-regulator";
+			LDO_VIN3-supply = <&mt6360_buck2>;
+
+			mt6360_buck1: buck1 {
+				regulator-name = "emi_vdd2";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_buck2: buck2 {
+				regulator-name = "emi_vddq";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo1: ldo1 {
+				regulator-name = "tp1_p3v0";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo2: ldo2 {
+				regulator-name = "panel1_p1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo3: ldo3 {
+				regulator-name = "vmc_pmu";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo5: ldo5 {
+				regulator-name = "vmch_pmu";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			/* This is a measure point, which name is mt6360_ldo1 on schematic */
+			mt6360_ldo6: ldo6 {
+				regulator-name = "mt6360_ldo1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo7: ldo7 {
+				regulator-name = "emi_vmddr_en";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+		};
+
+		tcpc {
+			compatible = "mediatek,mt6360-tcpc";
+			interrupts-extended = <&pio 17 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "PD_IRQB";
+
+			connector {
+				compatible = "usb-c-connector";
+				label = "USB-C";
+				data-role = "dual";
+				op-sink-microwatt = <10000000>;
+				power-role = "dual";
+				try-power-role = "sink";
+
+				source-pdos = <PDO_FIXED(5000, 1000,
+							 PDO_FIXED_DUAL_ROLE |
+							 PDO_FIXED_DATA_SWAP)>;
+				sink-pdos = <PDO_FIXED(5000, 2000,
+						       PDO_FIXED_DUAL_ROLE |
+						       PDO_FIXED_DATA_SWAP)>;
+
+				pd-revision = /bits/ 8 <0x03 0x01 0x01 0x06>;
+
+				altmodes {
+					displayport {
+						svid = /bits/ 16 <0xff01>;
+						vdo = <0x00001c46>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						typec_con_hs: endpoint {
+							remote-endpoint = <&mtu3_hs0_role_sw>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						typec_con_ss: endpoint {
+							remote-endpoint = <&mtu3_ss0_role_sw>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						mt6360_ssusb_sbu_ep: endpoint {
+							remote-endpoint = <&it5205_sbu_ep>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+&mfg0 {
+	domain-supply = <&mt6315_7_vbuck1>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x14c11>;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>;
+	pinctrl-1 = <&mmc1_uhs_pins>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	no-mmc;
+	no-sdio;
+	vmmc-supply = <&mt6360_ldo5>;
+	vqmmc-supply = <&mt6360_ldo3>;
+	status = "okay";
+	non-removable;
+};
+
+&mt6359_vaud18_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+/* For USB Hub */
+&mt6359_vcamio_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcn33_2_bt_ldo_reg {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+/* for GPU SRAM */
+&mt6359_vsram_others_ldo_reg {
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <750000>;
+};
+
+&mt6359codec {
+	mediatek,mic-type-0 = <1>; /* ACC */
+	mediatek,mic-type-1 = <3>; /* DCC */
+	mediatek,mic-type-2 = <1>; /* ACC */
+};
+
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
+&pcie0 {
+	pinctrl-names = "default", "idle";
+	pinctrl-0 = <&pcie0_default_pins>;
+	pinctrl-1 = <&pcie0_idle_pins>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_pins>;
+	status = "disabled";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pio {
+	audio_default_pins: audio-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO61__FUNC_DMIC1_CLK>,
+				 <PINMUX_GPIO62__FUNC_DMIC1_DAT>,
+				 <PINMUX_GPIO65__FUNC_PCM_DO>,
+				 <PINMUX_GPIO66__FUNC_PCM_CLK>,
+				 <PINMUX_GPIO67__FUNC_PCM_DI>,
+				 <PINMUX_GPIO68__FUNC_PCM_SYNC>,
+				 <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>,
+				 <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>,
+				 <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>,
+				 <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>;
+		};
+	};
+
+	disp_pwm1_default_pins: disp-pwm1-default-pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO104__FUNC_DISP_PWM1>;
+		};
+	};
+
+	edp_panel_12v_en_pins: edp-panel-12v-en-pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
+			output-high;
+		};
+	};
+
+	edp_panel_3v3_en_pins: edp-panel-3v3-en-pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+			output-high;
+		};
+	};
+
+	eth_default_pins: eth-default-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
+				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
+				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
+				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
+			drive-strength = <8>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
+				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
+			input-enable;
+		};
+
+		pins-power {
+			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
+				 <PINMUX_GPIO92__FUNC_GPIO92>;
+			output-high;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
+				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
+				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
+				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
+				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
+				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
+				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
+			drive-strength = <8>;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>,
+				 <PINMUX_GPIO87__FUNC_GPIO87>,
+				 <PINMUX_GPIO88__FUNC_GPIO88>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
+				 <PINMUX_GPIO90__FUNC_GPIO90>;
+			input-disable;
+			bias-disable;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
+				 <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO83__FUNC_GPIO83>,
+				 <PINMUX_GPIO84__FUNC_GPIO84>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_GPIO78>,
+				 <PINMUX_GPIO79__FUNC_GPIO79>,
+				 <PINMUX_GPIO80__FUNC_GPIO80>;
+		};
+	};
+
+	gpio_key_pins: gpio-keys-pins {
+		pins {
+			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
+				 <PINMUX_GPIO9__FUNC_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
+				 <PINMUX_GPIO11__FUNC_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins {
+			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
+				 <PINMUX_GPIO13__FUNC_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength = <6>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+				 <PINMUX_GPIO26__FUNC_SCL6>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_uhs_pins: mmc1-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mt6360_pins: mt6360-pins {
+		pins {
+			pinmux = <PINMUX_GPIO17__FUNC_GPIO17>,
+				 <PINMUX_GPIO128__FUNC_GPIO128>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	dsi0_vreg_en_pins: dsi0-vreg-en-pins {
+		pins-pwr-en {
+			pinmux = <PINMUX_GPIO47__FUNC_GPIO47>;
+			output-low;
+		};
+	};
+
+	panel_default_pins: panel-default-pins {
+		pins-rst {
+			pinmux = <PINMUX_GPIO108__FUNC_GPIO108>;
+			output-high;
+		};
+
+		pins-en {
+			pinmux = <PINMUX_GPIO48__FUNC_GPIO48>;
+			output-low;
+		};
+	};
+
+	pcie0_default_pins: pcie0-default-pins {
+		pins {
+			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
+				 <PINMUX_GPIO20__FUNC_PERSTN>,
+				 <PINMUX_GPIO21__FUNC_CLKREQN>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_idle_pins: pcie0-idle-pins {
+		pins {
+			pinmux = <PINMUX_GPIO20__FUNC_GPIO20>;
+			bias-disable;
+			output-low;
+		};
+	};
+
+	pcie1_default_pins: pcie1-default-pins {
+		pins {
+			pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>,
+				 <PINMUX_GPIO23__FUNC_CLKREQN_1>,
+				 <PINMUX_GPIO24__FUNC_WAKEN_1>;
+			bias-pull-up;
+		};
+	};
+
+	disp_pwm0_pins: disp-pwm0-pins {
+		pins-disp-pwm {
+			pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
+				 <PINMUX_GPIO137__FUNC_SPIM1_CLK>,
+				 <PINMUX_GPIO138__FUNC_SPIM1_MO>,
+				 <PINMUX_GPIO139__FUNC_SPIM1_MI>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi-pins {
+		pins {
+			pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
+				 <PINMUX_GPIO141__FUNC_SPIM2_CLK>,
+				 <PINMUX_GPIO142__FUNC_SPIM2_MO>,
+				 <PINMUX_GPIO143__FUNC_SPIM2_MI>;
+			bias-disable;
+		};
+	};
+
+	touch_pins: touch-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO132__FUNC_GPIO132>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO133__FUNC_GPIO133>;
+			output-high;
+		};
+	};
+
+	u3_p0_vbus: u3-p0-vbus-default-pins {
+		pins-vbus {
+			pinmux = <PINMUX_GPIO63__FUNC_VBUSVALID>;
+			input-enable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
+				 <PINMUX_GPIO99__FUNC_URXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO100__FUNC_URTS1>,
+				 <PINMUX_GPIO101__FUNC_UCTS1>,
+				 <PINMUX_GPIO102__FUNC_UTXD1>,
+				 <PINMUX_GPIO103__FUNC_URXD1>;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+
+	mt6359keys: keys {
+		compatible = "mediatek,mt6359-keys";
+		mediatek,long-press-mode = <1>;
+		power-off-time-sec = <0>;
+
+		power-key {
+			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		home {
+			linux,keycodes = <KEY_HOME>;
+		};
+	};
+};
+
+&scp {
+	memory-region = <&scp_mem>;
+	firmware-name = "mediatek/mt8195/scp.img";
+	status = "okay";
+};
+
+&sound {
+	compatible = "mediatek,mt8195_mt6359";
+	model = "mt8395-evk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_default_pins>;
+	audio-routing =
+		"Headphone", "Headphone L",
+		"Headphone", "Headphone R";
+	mediatek,adsp = <&adsp>;
+	status = "okay";
+
+	headphone-dai-link {
+		link-name = "DL_SRC_BE";
+
+		codec {
+			sound-dai = <&pmic 0>;
+		};
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	cs-gpios = <&pio 64 GPIO_ACTIVE_LOW>;
+
+	can0: can@0 {
+		compatible = "microchip,mcp2518fd";
+		reg = <0>;
+		clocks = <&can_clk>;
+		spi-max-frequency = <20000000>;
+		interrupts-extended = <&pio 16 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
+		xceiver-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
+	};
+};
+
+&spi2 {
+	pinctrl-0 = <&spi2_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&spmi {
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	mt6315_6: pmic@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-name = "Vbcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mt6315_7: pmic@7 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x7 SPMI_USID>;
+
+		regulators {
+			mt6315_7_vbuck1: vbuck1 {
+				regulator-name = "Vgpu";
+				regulator-min-microvolt = <546000>;
+				regulator-max-microvolt = <787000>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+		};
+	};
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+
+	u3port1: usb-phy@700 {
+		mediatek,force-mode;
+	};
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&u3phy3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ufsphy {
+	status = "disabled";
+};
+
+&ssusb0 {
+	dr_mode = "otg";
+	pinctrl-names = "default";
+	pinctrl-0 = <&u3_p0_vbus>;
+	usb-role-switch;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			mtu3_hs0_role_sw: endpoint {
+				remote-endpoint = <&typec_con_hs>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			mtu3_ss0_role_sw: endpoint {
+				remote-endpoint = <&typec_con_ss>;
+			};
+		};
+	};
+};
+
+&ssusb2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb3 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci1 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci2 {
+	status = "okay";
+};
+
+&xhci3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts b/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
new file mode 100644
index 000000000000..d16f545cbbb2
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
@@ -0,0 +1,1129 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2024 Kontron Europe GmbH
+ *
+ * Author: Michael Walle <mwalle@kernel.org>
+ */
+/dts-v1/;
+
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	model = "Kontron 3.5\"-SBC-i1200";
+	compatible = "kontron,3-5-sbc-i1200", "mediatek,mt8395", "mediatek,mt8195";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+
+		key-0 {
+			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led-0 {
+			gpios = <&pio 107 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x0 0x80000000>;
+	};
+
+	vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		vpu_mem: memory@53000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_mem: memory@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x200000>;
+		};
+
+		snd_dma_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0x1100000>;
+			no-map;
+		};
+
+		apu_mem: memory@62000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
+		};
+	};
+
+	thermal_sensor0: thermal-sensor-0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <(-25000) 1474
+					    (-20000) 1374
+					    (-15000) 1260
+					    (-10000) 1134
+					     (-5000) 1004
+						   0 874
+						5000 750
+					       10000 635
+					       15000 532
+					       20000 443
+					       25000 367
+					       30000 303
+					       35000 250
+					       40000 206
+					       45000 170
+					       50000 141
+					       55000 117
+					       60000 97
+					       65000 81
+					       70000 68
+					       75000 57
+					       80000 48
+					       85000 41
+					       90000 35
+					       95000 30
+					      100000 25
+					      105000 22
+					      110000 19
+					      115000 16
+					      120000 14
+					      125000 12
+					      130000 10
+					      135000 9
+					      140000 8
+					      145000 7
+					      150000 6>;
+	};
+
+	thermal_sensor1: thermal-sensor-1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <(-25000) 1474
+					    (-20000) 1374
+					    (-15000) 1260
+					    (-10000) 1134
+					     (-5000) 1004
+						   0 874
+						5000 750
+					       10000 635
+					       15000 532
+					       20000 443
+					       25000 367
+					       30000 303
+					       35000 250
+					       40000 206
+					       45000 170
+					       50000 141
+					       55000 117
+					       60000 97
+					       65000 81
+					       70000 68
+					       75000 57
+					       80000 48
+					       85000 41
+					       90000 35
+					       95000 30
+					      100000 25
+					      105000 22
+					      110000 19
+					      115000 16
+					      120000 14
+					      125000 12
+					      130000 10
+					      135000 9
+					      140000 8
+					      145000 7
+					      150000 6>;
+	};
+
+	thermal_sensor2: thermal-sensor-2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 2>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <(-25000) 1474
+					    (-20000) 1374
+					    (-15000) 1260
+					    (-10000) 1134
+					     (-5000) 1004
+						   0 874
+						5000 750
+					       10000 635
+					       15000 532
+					       20000 443
+					       25000 367
+					       30000 303
+					       35000 250
+					       40000 206
+					       45000 170
+					       50000 141
+					       55000 117
+					       60000 97
+					       65000 81
+					       70000 68
+					       75000 57
+					       80000 48
+					       85000 41
+					       90000 35
+					       95000 30
+					      100000 25
+					      105000 22
+					      110000 19
+					      115000 16
+					      120000 14
+					      125000 12
+					      130000 10
+					      135000 9
+					      140000 8
+					      145000 7
+					      150000 6>;
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&eth {
+	phy-mode ="rgmii-id";
+	phy-handle = <&ethernet_phy0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	mediatek,mac-wol;
+	status = "okay";
+
+	mdio {
+		ethernet_phy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <0x1>;
+			interrupts-extended = <&pio 94 IRQ_TYPE_LEVEL_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&pio 93 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&mt6315_7_vbuck1>;
+};
+
+/* CSI1/CSI2 connector */
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+/* CSI3 connector */
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* LVDS bridge @f */
+};
+
+/* Touch panel connector */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+/* B2B connector */
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mt6360: pmic@34 {
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		interrupt-controller;
+		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "IRQB";
+		#interrupt-cells = <1>;
+
+		regulator {
+			compatible = "mediatek,mt6360-regulator";
+			LDO_VIN1-supply = <&vsys>;
+			LDO_VIN2-supply = <&vsys>;
+			LDO_VIN3-supply = <&vsys>;
+
+			mt6360_buck1: buck1 {
+				regulator-name = "emi_vdd2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_buck2: buck2 {
+				regulator-name = "emi_vddq";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo1: ldo1 {
+				regulator-name = "mt6360_ldo1"; /* Test point */
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo2: ldo2 {
+				regulator-name = "panel1_p1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo3: ldo3 {
+				regulator-name = "vmc_pmu";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo5: ldo5 {
+				regulator-name = "vmch_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo6: ldo6 {
+				regulator-name = "mt6360_ldo6"; /* Test point */
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo7: ldo7 {
+				regulator-name = "emi_vmddr_en";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	hs400-ds-delay = <0x14c11>;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	no-sdio;
+	no-sd;
+	non-removable;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>, <&mmc1_detect_pins>;
+	pinctrl-1 = <&mmc1_default_pins>;
+	cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	no-mmc;
+	vmmc-supply = <&mt6360_ldo5>;
+	vqmmc-supply = <&mt6360_ldo3>;
+	status = "okay";
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc1_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc2_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_md_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_others_ldo_reg {
+	regulator-always-on;
+};
+
+&nor_flash {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_pins_default>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_pins_default>;
+	status = "okay";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pio {
+	eth_default_pins: eth-default-pins {
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
+				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
+				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
+				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
+			drive-strength = <8>;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
+				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
+				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
+				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
+		};
+
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
+				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
+				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
+				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
+			drive-strength = <8>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
+				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
+			input-enable;
+		};
+
+		pins-power {
+			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
+				 <PINMUX_GPIO92__FUNC_GPIO92>;
+			output-high;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO93__FUNC_GPIO93>;
+			output-high;
+		};
+
+		pins-interrupt {
+			pinmux = <PINMUX_GPIO94__FUNC_GPIO94>;
+			input-enable;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_GPIO78>,
+				 <PINMUX_GPIO79__FUNC_GPIO79>,
+				 <PINMUX_GPIO80__FUNC_GPIO80>;
+		};
+
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
+				 <PINMUX_GPIO88__FUNC_GPIO88>,
+				 <PINMUX_GPIO87__FUNC_GPIO87>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
+				 <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO83__FUNC_GPIO83>,
+				 <PINMUX_GPIO84__FUNC_GPIO84>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
+				 <PINMUX_GPIO90__FUNC_GPIO90>;
+			input-disable;
+			bias-disable;
+		};
+	};
+
+	gpio_keys_pins: gpio-keys-pins {
+		pins {
+			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
+				 <PINMUX_GPIO9__FUNC_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
+				 <PINMUX_GPIO11__FUNC_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c2_pins: i2c2-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
+				 <PINMUX_GPIO13__FUNC_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins {
+			pinmux = <PINMUX_GPIO14__FUNC_SDA3>,
+				 <PINMUX_GPIO15__FUNC_SCL3>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins {
+			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
+				 <PINMUX_GPIO17__FUNC_SCL4>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+				 <PINMUX_GPIO26__FUNC_SCL6>;
+			bias-pull-up;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_detect_pins: mmc1-detect-pins {
+		pins-insert {
+			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
+			bias-pull-up;
+		};
+	};
+
+	nor_pins_default: nor-default-pins {
+		pins-ck-io {
+			pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>,
+				 <PINMUX_GPIO141__FUNC_SPINOR_CK>,
+				 <PINMUX_GPIO143__FUNC_SPINOR_IO1>;
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+
+		pins-cs {
+			pinmux = <PINMUX_GPIO140__FUNC_SPINOR_CS>;
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_pins_default: pcie0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
+				 <PINMUX_GPIO20__FUNC_PERSTN>,
+				 <PINMUX_GPIO21__FUNC_CLKREQN>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_pins_default: pcie1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO0__FUNC_PERSTN_1>,
+				 <PINMUX_GPIO1__FUNC_CLKREQN_1>,
+				 <PINMUX_GPIO2__FUNC_WAKEN_1>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	led_pins: led-pins {
+		pins-power-en {
+			pinmux = <PINMUX_GPIO107__FUNC_GPIO107>;
+			output-high;
+		};
+	};
+
+	spi0_pins: spi0-default-pins {
+		pins-cs-mosi-clk {
+			pinmux = <PINMUX_GPIO132__FUNC_SPIM0_CSB>,
+				 <PINMUX_GPIO134__FUNC_SPIM0_MO>,
+				 <PINMUX_GPIO133__FUNC_SPIM0_CLK>;
+			bias-disable;
+		};
+
+		pins-miso {
+			pinmux = <PINMUX_GPIO135__FUNC_SPIM0_MI>;
+			bias-pull-down;
+		};
+	};
+
+	spi1_pins: spi1-default-pins {
+		pins-cs-mosi-clk {
+			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
+				 <PINMUX_GPIO138__FUNC_SPIM1_MO>,
+				 <PINMUX_GPIO137__FUNC_SPIM1_CLK>;
+			bias-disable;
+		};
+
+		pins-miso {
+			pinmux = <PINMUX_GPIO139__FUNC_SPIM1_MI>;
+			bias-pull-down;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO99__FUNC_URXD0>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO103__FUNC_URXD1>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO102__FUNC_UTXD1>;
+		};
+
+		pins-rts {
+			pinmux = <PINMUX_GPIO100__FUNC_URTS1>;
+		};
+
+		pins-cts {
+			pinmux = <PINMUX_GPIO101__FUNC_UCTS1>;
+			input-enable;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO68__FUNC_URXD2>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO67__FUNC_UTXD2>;
+		};
+
+		pins-rts {
+			pinmux = <PINMUX_GPIO66__FUNC_URTS2>;
+		};
+
+		pins-cts {
+			pinmux = <PINMUX_GPIO65__FUNC_UCTS2>;
+			input-enable;
+		};
+	};
+
+	uart3_pins: uart3-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO5__FUNC_URXD3>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO4__FUNC_UTXD3>;
+		};
+	};
+
+	uart4_pins: uart4-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO7__FUNC_URXD4>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO6__FUNC_UTXD4>;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp {
+	memory-region = <&scp_mem>;
+	firmware-name = "mediatek/mt8195/scp.img";
+	status = "okay";
+};
+
+&spmi {
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	mt6315@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-name = "Vbcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-ramp-delay = <6250>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mt6315@7 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x7 SPMI_USID>;
+
+		regulators {
+			mt6315_7_vbuck1: vbuck1 {
+				regulator-name = "Vgpu";
+				regulator-min-microvolt = <625000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-ramp-delay = <6250>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+/* USB3.2 front port */
+&ssusb0 {
+	dr_mode = "host";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+/* USB2.0 M.2 Key-E */
+&ssusb2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+/* USB2.0 to on-board usb hub */
+&ssusb3 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+	tpm: tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* B2B connector */
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+};
+
+&thermal_zones {
+	cpu-thermal {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&thermal_sensor0>;
+
+		trips {
+			trip-alert {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			trip-crit {
+				temperature = <95000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pcb-top-thermal {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&thermal_sensor1>;
+
+		trips {
+			trip-alert {
+				temperature = <75000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			trip-crit {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pcb-bottom-thermal {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&thermal_sensor2>;
+
+		trips {
+			trip-alert {
+				temperature = <75000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			trip-crit {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "okay";
+};
+
+/* USB3 */
+&u3phy0 {
+	status = "okay";
+};
+
+/* PCIe1/USB2 */
+&u3phy1 {
+	status = "okay";
+};
+
+/* USB2 */
+&u3phy2 {
+	status = "okay";
+};
+
+/* USB2 */
+&u3phy3 {
+	status = "okay";
+};
+
+/* USB3.2 front port */
+&xhci0 {
+	status = "okay";
+};
+
+/* USB2.0 M.2 Key-B */
+&xhci1 {
+	phys = <&u2port1 PHY_TYPE_USB2>;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	mediatek,u3p-dis-msk = <0x01>;
+	status = "okay";
+};
+
+/* USB2.0 M.2 Key-E */
+&xhci2 {
+	status = "okay";
+};
+
+/* USB2.0 to on-board usb hub */
+&xhci3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l-8-hd-panel.dtso b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l-8-hd-panel.dtso
new file mode 100644
index 000000000000..0389c9cb8581
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l-8-hd-panel.dtso
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Radxa Display 8 HD touchscreen module
+ * Copyright (C) 2025 Collabora Ltd.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&backlight {
+	status = "okay";
+};
+
+&disp_pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_default_pins>;
+	status = "okay";
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "radxa,display-8hd-ad002", "jadard,jd9365da-h3";
+		reg = <0>;
+		backlight = <&backlight>;
+		vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
+		vccio-supply = <&mt6360_ldo2>;
+		reset-gpios = <&pio 108 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_default_pins>;
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+};
+
+&dsi0_out {
+	remote-endpoint = <&dsi_panel_in>;
+};
+
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@14 {
+		compatible = "goodix,gt911";
+		reg = <0x14>;
+		interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>;
+		irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
+		VDDIO-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+	};
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
new file mode 100644
index 000000000000..d32f973f5e05
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
@@ -0,0 +1,1079 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Radxa Limited
+ * Copyright (C) 2024 Collabora Ltd.
+ *                    AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	model = "Radxa NIO 12L";
+	chassis-type = "embedded";
+	compatible = "radxa,nio-12l", "mediatek,mt8395", "mediatek,mt8195";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+		i2c2 = &i2c4;
+		i2c3 = &i2c0;
+		i2c4 = &i2c1;
+		ethernet0 = &eth;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &spi1;
+		spi1 = &spi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x1 0x0>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <576>;
+		enable-gpios = <&pio 107 GPIO_ACTIVE_HIGH>;
+		num-interpolated-steps = <1023>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsi0_backlight_pins>;
+		pwms = <&disp_pwm0 0 500000>;
+		status = "disabled";
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		button-volume-up {
+			wakeup-source;
+			debounce-interval = <100>;
+			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	wifi_vreg: regulator-wifi-3v3-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wifi_3v3_en";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 67 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_vreg_pins>;
+		vin-supply = <&vsys>;
+	};
+
+	/* system wide switching 5.0V power rail */
+	vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_vsys>;
+	};
+
+	vsys_buck: regulator-vsys-buck {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_buck";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_vsys>;
+	};
+
+	/* Rail from power-only "TYPE C DC" port */
+	vcc5v0_vsys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			reg = <0 0x43200000 0 0xc00000>;
+			no-map;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		vpu_mem: memory@53000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_mem: memory@54600000 {
+			reg = <0 0x54600000 0x0 0x200000>;
+			no-map;
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xf00000>;
+			no-map;
+		};
+
+		afe_dma_mem: memory@60f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60f00000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
+			no-map;
+		};
+
+		apu_mem: memory@62000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
+		};
+	};
+};
+
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu2 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu3 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu5 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu6 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu7 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint { };
+		};
+	};
+};
+
+&eth {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&rgmii_phy>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	mediatek,tx-delay-ps = <2030>;
+	mediatek,mac-wol;
+	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
+	snps,reset-delays-us = <0 20000 100000>;
+	status = "okay";
+
+	mdio {
+		rgmii_phy: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <0x1>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&mt6315_7_vbuck1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	typec-mux@48 {
+		compatible = "ite,it5205";
+		reg = <0x48>;
+
+		mode-switch;
+		orientation-switch;
+
+		vcc-supply = <&mt6359_vibr_ldo_reg>;
+
+		port {
+			it5205_sbu_mux: endpoint {
+				remote-endpoint = <&typec_con_mux>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* I2C4 exposed at 39-pins MIPI-LCD connector */
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mt6360: pmic@34 {
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "IRQB";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		pinctrl-0 = <&mt6360_pins>;
+
+		charger {
+			compatible = "mediatek,mt6360-chg";
+			richtek,vinovp-microvolt = <14500000>;
+
+			otg_vbus_regulator: usb-otg-vbus-regulator {
+				regulator-name = "usb-otg-vbus";
+				regulator-min-microvolt = <4425000>;
+				regulator-max-microvolt = <5825000>;
+			};
+		};
+
+		regulator {
+			compatible = "mediatek,mt6360-regulator";
+			LDO_VIN1-supply = <&vsys_buck>;
+			LDO_VIN3-supply = <&mt6360_buck2>;
+
+			mt6360_buck1: buck1 {
+				regulator-name = "emi_vdd2";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_buck2: buck2 {
+				regulator-name = "emi_vddq";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo1: ldo1 {
+				regulator-name = "ext_lcd_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo2: ldo2 {
+				regulator-name = "panel1_p1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo3: ldo3 {
+				regulator-name = "vmc_pmu";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo5: ldo5 {
+				regulator-name = "vmch_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo6: ldo6 {
+				regulator-name = "mt6360_ldo6"; /* Test point */
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo7: ldo7 {
+				regulator-name = "emi_vmddr_en";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+		};
+
+		typec {
+			compatible = "mediatek,mt6360-tcpc";
+			interrupts-extended = <&pio 100 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "PD_IRQB";
+
+			connector {
+				compatible = "usb-c-connector";
+				label = "USB-C";
+				data-role = "dual";
+				op-sink-microwatt = <10000000>;
+				power-role = "dual";
+				try-power-role = "sink";
+
+				source-pdos = <PDO_FIXED(5000, 1000,
+							 PDO_FIXED_DUAL_ROLE |
+							 PDO_FIXED_DATA_SWAP)>;
+				sink-pdos = <PDO_FIXED(5000, 3000,
+						       PDO_FIXED_DUAL_ROLE |
+						       PDO_FIXED_DATA_SWAP)>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						typec_con_hs: endpoint {
+							remote-endpoint = <&mtu3_hs0_role_sw>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						typec_con_mux: endpoint {
+							remote-endpoint = <&it5205_sbu_mux>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+&mfg0 {
+	domain-supply = <&mt6315_7_vbuck1>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+/* MMC0 Controller: eMMC (HS400). Power lines are shared with UFS! */
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	hs400-ds-delay = <0x14c11>;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	no-sdio;
+	no-sd;
+	non-removable;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	status = "okay";
+};
+
+/* MMC1 Controller: MicroSD card slot */
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>, <&mmc1_pins_detect>;
+	pinctrl-1 = <&mmc1_default_pins>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&mt6360_ldo5>;
+	vqmmc-supply = <&mt6360_ldo3>;
+	status = "okay";
+};
+
+&mt6359_vaud18_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+/* For USB Hub */
+&mt6359_vcamio_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcn33_2_bt_ldo_reg {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc1_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc2_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_md_ldo_reg {
+	regulator-always-on;
+};
+
+/* for GPU SRAM */
+&mt6359_vsram_others_ldo_reg {
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <750000>;
+};
+
+&pio {
+	mediatek,rsel-resistance-in-si-unit;
+
+	audio_default_pins: audio-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>,
+				 <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>,
+				 <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>,
+				 <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>;
+		};
+	};
+
+	dsi0_backlight_pins: dsi0-backlight-pins {
+		pins-backlight-en {
+			pinmux = <PINMUX_GPIO107__FUNC_GPIO107>;
+			output-high;
+		};
+	};
+
+	eth_default_pins: eth-default-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
+				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
+				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
+				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
+			drive-strength = <8>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
+				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
+			input-enable;
+		};
+
+		pins-power {
+			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
+				 <PINMUX_GPIO92__FUNC_GPIO92>;
+			output-high;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO93__FUNC_GPIO93>;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
+				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
+				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
+				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
+				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
+				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
+				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
+			drive-strength = <8>;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>,
+				 <PINMUX_GPIO87__FUNC_GPIO87>,
+				 <PINMUX_GPIO88__FUNC_GPIO88>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
+				 <PINMUX_GPIO90__FUNC_GPIO90>;
+			bias-disable;
+			input-disable;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
+				 <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO83__FUNC_GPIO83>,
+				 <PINMUX_GPIO84__FUNC_GPIO84>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_GPIO78>,
+				 <PINMUX_GPIO79__FUNC_GPIO79>,
+				 <PINMUX_GPIO80__FUNC_GPIO80>;
+		};
+	};
+
+	gpio_key_pins: gpio-keys-pins {
+		pins {
+			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
+				 <PINMUX_GPIO13__FUNC_SCL2>;
+			bias-pull-up = <1000>;
+			drive-strength = <6>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
+				 <PINMUX_GPIO17__FUNC_SCL4>;
+			bias-pull-up = <1000>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+				 <PINMUX_GPIO26__FUNC_SCL6>;
+			bias-disable;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <6>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <6>;
+			input-enable;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <6>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <8>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <8>;
+			input-enable;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <8>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <8>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <8>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <8>;
+			input-enable;
+		};
+	};
+
+	mmc1_pins_detect: mmc1-detect-pins {
+		pins-insert {
+			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
+			bias-pull-up;
+		};
+	};
+
+	mt6360_pins: mt6360-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO100__FUNC_GPIO100>,
+				 <PINMUX_GPIO101__FUNC_GPIO101>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	panel_default_pins: panel-pins {
+		pins-rst {
+			pinmux = <PINMUX_GPIO108__FUNC_GPIO108>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_default_pins: pcie0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
+				 <PINMUX_GPIO20__FUNC_PERSTN>,
+				 <PINMUX_GPIO21__FUNC_CLKREQN>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_pins: pcie1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO0__FUNC_PERSTN_1>,
+				 <PINMUX_GPIO1__FUNC_CLKREQN_1>,
+				 <PINMUX_GPIO2__FUNC_WAKEN_1>;
+			bias-disable;
+		};
+	};
+
+	pwm0_default_pins: pwm0-pins {
+		pins-disp-pwm {
+			pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>;
+		};
+	};
+
+	spi1_pins: spi1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
+				 <PINMUX_GPIO137__FUNC_SPIM1_CLK>,
+				 <PINMUX_GPIO138__FUNC_SPIM1_MO>,
+				 <PINMUX_GPIO139__FUNC_SPIM1_MI>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
+				 <PINMUX_GPIO141__FUNC_SPIM2_CLK>,
+				 <PINMUX_GPIO142__FUNC_SPIM2_MO>,
+				 <PINMUX_GPIO143__FUNC_SPIM2_MI>;
+			bias-disable;
+		};
+	};
+
+	touch_pins: touch-pins {
+		pins-touch-int {
+			pinmux = <PINMUX_GPIO132__FUNC_GPIO132>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-touch-rst {
+			pinmux = <PINMUX_GPIO133__FUNC_GPIO133>;
+			output-high;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
+				 <PINMUX_GPIO99__FUNC_URXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO102__FUNC_UTXD1>,
+				 <PINMUX_GPIO103__FUNC_URXD1>;
+		};
+	};
+
+	usb3_port0_pins: usb3p0-default-pins {
+		pins-vbus {
+			pinmux = <PINMUX_GPIO63__FUNC_VBUSVALID>;
+			input-enable;
+		};
+	};
+
+	usb2_port0_pins: usb2p0-default-pins {
+		pins-iddig {
+			pinmux = <PINMUX_GPIO130__FUNC_IDDIG_1P>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-vbus {
+			pinmux = <PINMUX_GPIO131__FUNC_USB_DRVVBUS_1P>;
+			output-low;
+		};
+	};
+
+	wifi_vreg_pins: wifi-vreg-pins {
+		pins-wifi-pmu-en {
+			pinmux = <PINMUX_GPIO65__FUNC_GPIO65>;
+			output-high;
+		};
+
+		pins-wifi-vreg-en {
+			pinmux = <PINMUX_GPIO67__FUNC_GPIO67>;
+		};
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_pins>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_pins>;
+	status = "okay";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+
+	mt6359keys: keys {
+		compatible = "mediatek,mt6359-keys";
+		mediatek,long-press-mode = <1>;
+		power-off-time-sec = <0>;
+
+		power-key {
+			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		home {
+			linux,keycodes = <KEY_HOME>;
+		};
+	};
+};
+
+&scp {
+	memory-region = <&scp_mem>;
+	firmware-name = "mediatek/mt8195/scp.img";
+	status = "okay";
+};
+
+&sound {
+	compatible = "mediatek,mt8195_mt6359";
+	model = "mt8395-evk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_default_pins>;
+	audio-routing =
+		"Headphone", "Headphone L",
+		"Headphone", "Headphone R";
+	mediatek,adsp = <&adsp>;
+	status = "okay";
+
+	headphone-dai-link {
+		link-name = "DL_SRC_BE";
+
+		codec {
+			sound-dai = <&pmic 0>;
+		};
+	};
+};
+
+&spi1 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&spi2 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&spi2_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&spmi {
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	mt6315_6: pmic@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-name = "Vbcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mt6315_7: pmic@7 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x7 SPMI_USID>;
+
+		regulators {
+			mt6315_7_vbuck1: vbuck1 {
+				regulator-name = "Vgpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+		};
+	};
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&uart0 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ufshci {
+	vcc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vccq2-supply = <&mt6359_vufs_ldo_reg>;
+	status = "okay";
+};
+
+&ufsphy {
+	status = "okay";
+};
+
+&ssusb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb3_port0_pins>;
+	role-switch-default-mode = "host";
+	usb-role-switch;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+
+	port {
+		mtu3_hs0_role_sw: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&ssusb2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_port0_pins>;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci0 {
+	vbus-supply = <&otg_vbus_regulator>;
+	status = "okay";
+};
+
+&xhci1 {
+	phys = <&u2port1 PHY_TYPE_USB2>;
+	/* MT7921's USB Bluetooth has issues with USB2 LPM */
+	usb2-lpm-disable;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&vsys>;
+	mediatek,u3p-dis-msk = <1>;
+	status = "okay";
+};
+
+&xhci2 {
+	vbus-supply = <&vsys>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
index cce642c53812..3d3db33a64dc 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "Pumpkin MT8516";
-	compatible = "mediatek,mt8516";
+	compatible = "mediatek,mt8516-pumpkin", "mediatek,mt8516";
 
 	memory@40000000 {
 		device_type = "memory";
diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
index d1b67c82d761..b5e753759465 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -144,10 +144,10 @@
 		#size-cells = <2>;
 		ranges;
 
-		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
 		bl31_secmon_reserved: secmon@43000000 {
 			no-map;
-			reg = <0 0x43000000 0 0x20000>;
+			reg = <0 0x43000000 0 0x30000>;
 		};
 	};
 
@@ -165,7 +165,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a35-pmu";
 		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
@@ -202,11 +202,11 @@
 			#clock-cells = <1>;
 		};
 
-		toprgu: toprgu@10007000 {
+		watchdog@10007000 {
 			compatible = "mediatek,mt8516-wdt",
 				     "mediatek,mt6589-wdt";
 			reg = <0 0x10007000 0 0x1000>;
-			interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
 			#reset-cells = <1>;
 		};
 
@@ -220,6 +220,17 @@
 			clock-names = "clk13m", "bus";
 		};
 
+		keypad: keypad@10002000 {
+			compatible = "mediatek,mt8516-keypad",
+				     "mediatek,mt6779-keypad";
+			reg = <0 0x10002000 0 0x1000>;
+			wakeup-source;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clk26m>;
+			clock-names = "kpd";
+			status = "disabled";
+		};
+
 		syscfg_pctl: syscfg-pctl@10005000 {
 			compatible = "syscon";
 			reg = <0 0x10005000 0 0x1000>;
@@ -229,7 +240,6 @@
 			compatible = "mediatek,mt8516-pinctrl";
 			reg = <0 0x1000b000 0 0x1000>;
 			mediatek,pctl-regmap = <&syscfg_pctl>;
-			pins-are-numbered;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -269,7 +279,7 @@
 			interrupt-parent = <&gic>;
 			interrupt-controller;
 			reg = <0 0x10310000 0 0x1000>,
-			      <0 0x10320000 0 0x1000>,
+			      <0 0x1032f000 0 0x2000>,
 			      <0 0x10340000 0 0x2000>,
 			      <0 0x10360000 0 0x2000>;
 			interrupts = <GIC_PPI 9
@@ -345,6 +355,7 @@
 			reg = <0 0x11009000 0 0x90>,
 			      <0 0x11000180 0 0x80>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C0>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
@@ -359,6 +370,7 @@
 			reg = <0 0x1100a000 0 0x90>,
 			      <0 0x11000200 0 0x80>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C1>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
@@ -373,6 +385,7 @@
 			reg = <0 0x1100b000 0 0x90>,
 			      <0 0x11000280 0 0x80>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C2>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 8ee1529683a3..805fb82138a8 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -17,7 +17,7 @@
 	};
 
 	firmware {
-		optee: optee@4fd00000 {
+		optee: optee {
 			compatible = "linaro,optee-tz";
 			method = "smc";
 		};
@@ -47,7 +47,6 @@
 };
 
 &i2c0 {
-	clock-div = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
@@ -156,7 +155,6 @@
 };
 
 &i2c2 {
-	clock-div = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
@@ -200,8 +198,8 @@
 };
 
 &pio {
-	gpio_keys_default: gpiodefault {
-		pins_cmd_dat {
+	gpio_keys_default: gpio-keys-pins {
+		pins-cmd-dat {
 			pinmux = <MT8516_PIN_42_KPCOL0__FUNC_GPIO42>,
 				 <MT8516_PIN_43_KPCOL1__FUNC_GPIO43>;
 			bias-pull-up;
@@ -209,7 +207,7 @@
 		};
 	};
 
-	i2c0_pins_a: i2c0@0 {
+	i2c0_pins_a: i2c0-pins {
 		pins1 {
 			pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
 				 <MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
@@ -217,7 +215,7 @@
 		};
 	};
 
-	i2c2_pins_a: i2c2@0 {
+	i2c2_pins_a: i2c2-pins {
 		pins1 {
 			pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
 				 <MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
@@ -225,21 +223,21 @@
 		};
 	};
 
-	tca6416_pins: pinmux_tca6416_pins {
-		gpio_mux_rst_n_pin {
+	tca6416_pins: tca6416-pins {
+		pins-mux-rstn {
 			pinmux = <MT8516_PIN_65_UTXD1__FUNC_GPIO65>;
 			output-high;
 		};
 
-		gpio_mux_int_n_pin {
+		pins-mux-intn {
 			pinmux = <MT8516_PIN_64_URXD1__FUNC_GPIO64>;
 			input-enable;
 			bias-pull-up;
 		};
 	};
 
-	ethernet_pins_default: ethernet {
-		pins_ethernet {
+	ethernet_pins_default: ethernet-pins {
+		pins-eth {
 			pinmux = <MT8516_PIN_0_EINT0__FUNC_EXT_TXD0>,
 				 <MT8516_PIN_1_EINT1__FUNC_EXT_TXD1>,
 				 <MT8516_PIN_5_EINT5__FUNC_EXT_RXER>,
diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
index 2dd5e38820b1..c3029e0abacc 100644
--- a/arch/arm64/boot/dts/microchip/sparx5.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -24,7 +24,7 @@
 	};
 
 	cpus {
-		#address-cells = <2>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 		cpu-map {
 			cluster0 {
@@ -39,19 +39,21 @@
 		cpu0: cpu@0 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
-			reg = <0x0 0x0>;
+			reg = <0x0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
 		};
 		cpu1: cpu@1 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
-			reg = <0x0 0x1>;
+			reg = <0x1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
 		};
 		L2_0: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
@@ -61,7 +63,7 @@
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	psci {
+	psci: psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
 	};
@@ -445,7 +447,7 @@
 			pinctrl-names = "default";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x6 0x110102d4 0x24>;
+			reg = <0x6 0x110102f8 0x24>;
 		};
 
 		mdio3: mdio@61101031c {
@@ -458,23 +460,23 @@
 			reg = <0x6 0x1101031c 0x24>;
 		};
 
-		serdes: serdes@10808000 {
+		serdes: serdes@610808000 {
 			compatible = "microchip,sparx5-serdes";
 			#phy-cells = <1>;
 			clocks = <&sys_clk>;
 			reg = <0x6 0x10808000 0x5d0000>;
 		};
 
-		switch: switch@0x600000000 {
+		switch: switch@600000000 {
 			compatible = "microchip,sparx5-switch";
-			reg =	<0x6 0 0x401000>,
-				<0x6 0x10004000 0x7fc000>,
-				<0x6 0x11010000 0xaf0000>;
+			reg = <0x6 0 0x401000>,
+			      <0x6 0x10004000 0x7fc000>,
+			      <0x6 0x11010000 0xaf0000>;
 			reg-names = "cpu", "dev", "gcb";
 			interrupt-names = "xtr", "fdma", "ptp";
-			interrupts =	<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&reset 0>;
 			reset-names = "switch";
 		};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
index bf12be5e8d84..e60acc74e822 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -13,241 +13,435 @@
 		priority = <200>;
 	};
 
+	i2c0_imux: i2c-mux-0 {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+
+	i2c0_emux: i2c-mux-1 {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		led@0 {
+		led-0 {
 			label = "twr0:green";
 			gpios = <&sgpio_out0 8 0 GPIO_ACTIVE_LOW>;
 		};
-		led@1 {
+		led-1 {
 			label = "twr0:yellow";
 			gpios = <&sgpio_out0 8 1 GPIO_ACTIVE_LOW>;
 		};
-		led@2 {
+		led-2 {
 			label = "twr1:green";
 			gpios = <&sgpio_out0 9 0 GPIO_ACTIVE_LOW>;
 		};
-		led@3 {
+		led-3 {
 			label = "twr1:yellow";
 			gpios = <&sgpio_out0 9 1 GPIO_ACTIVE_LOW>;
 		};
-		led@4 {
+		led-4 {
 			label = "twr2:green";
 			gpios = <&sgpio_out0 10 0 GPIO_ACTIVE_LOW>;
 		};
-		led@5 {
+		led-5 {
 			label = "twr2:yellow";
 			gpios = <&sgpio_out0 10 1 GPIO_ACTIVE_LOW>;
 		};
-		led@6 {
+		led-6 {
 			label = "twr3:green";
 			gpios = <&sgpio_out0 11 0 GPIO_ACTIVE_LOW>;
 		};
-		led@7 {
+		led-7 {
 			label = "twr3:yellow";
 			gpios = <&sgpio_out0 11 1 GPIO_ACTIVE_LOW>;
 		};
-		led@8 {
+		led-8 {
 			label = "eth12:green";
 			gpios = <&sgpio_out0 12 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@9 {
+		led-9 {
 			label = "eth12:yellow";
 			gpios = <&sgpio_out0 12 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@10 {
+		led-10 {
 			label = "eth13:green";
 			gpios = <&sgpio_out0 13 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@11 {
+		led-11 {
 			label = "eth13:yellow";
 			gpios = <&sgpio_out0 13 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@12 {
+		led-12 {
 			label = "eth14:green";
 			gpios = <&sgpio_out0 14 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@13 {
+		led-13 {
 			label = "eth14:yellow";
 			gpios = <&sgpio_out0 14 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@14 {
+		led-14 {
 			label = "eth15:green";
 			gpios = <&sgpio_out0 15 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@15 {
+		led-15 {
 			label = "eth15:yellow";
 			gpios = <&sgpio_out0 15 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@16 {
+		led-16 {
 			label = "eth48:green";
 			gpios = <&sgpio_out1 16 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@17 {
+		led-17 {
 			label = "eth48:yellow";
 			gpios = <&sgpio_out1 16 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@18 {
+		led-18 {
 			label = "eth49:green";
 			gpios = <&sgpio_out1 17 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@19 {
+		led-19 {
 			label = "eth49:yellow";
 			gpios = <&sgpio_out1 17 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@20 {
+		led-20 {
 			label = "eth50:green";
 			gpios = <&sgpio_out1 18 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@21 {
+		led-21 {
 			label = "eth50:yellow";
 			gpios = <&sgpio_out1 18 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@22 {
+		led-22 {
 			label = "eth51:green";
 			gpios = <&sgpio_out1 19 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@23 {
+		led-23 {
 			label = "eth51:yellow";
 			gpios = <&sgpio_out1 19 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@24 {
+		led-24 {
 			label = "eth52:green";
 			gpios = <&sgpio_out1 20 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@25 {
+		led-25 {
 			label = "eth52:yellow";
 			gpios = <&sgpio_out1 20 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@26 {
+		led-26 {
 			label = "eth53:green";
 			gpios = <&sgpio_out1 21 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@27 {
+		led-27 {
 			label = "eth53:yellow";
 			gpios = <&sgpio_out1 21 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@28 {
+		led-28 {
 			label = "eth54:green";
 			gpios = <&sgpio_out1 22 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@29 {
+		led-29 {
 			label = "eth54:yellow";
 			gpios = <&sgpio_out1 22 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@30 {
+		led-30 {
 			label = "eth55:green";
 			gpios = <&sgpio_out1 23 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@31 {
+		led-31 {
 			label = "eth55:yellow";
 			gpios = <&sgpio_out1 23 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@32 {
+		led-32 {
 			label = "eth56:green";
 			gpios = <&sgpio_out1 24 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@33 {
+		led-33 {
 			label = "eth56:yellow";
 			gpios = <&sgpio_out1 24 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@34 {
+		led-34 {
 			label = "eth57:green";
 			gpios = <&sgpio_out1 25 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@35 {
+		led-35 {
 			label = "eth57:yellow";
 			gpios = <&sgpio_out1 25 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@36 {
+		led-36 {
 			label = "eth58:green";
 			gpios = <&sgpio_out1 26 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@37 {
+		led-37 {
 			label = "eth58:yellow";
 			gpios = <&sgpio_out1 26 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@38 {
+		led-38 {
 			label = "eth59:green";
 			gpios = <&sgpio_out1 27 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@39 {
+		led-39 {
 			label = "eth59:yellow";
 			gpios = <&sgpio_out1 27 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@40 {
+		led-40 {
 			label = "eth60:green";
 			gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@41 {
+		led-41 {
 			label = "eth60:yellow";
 			gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@42 {
+		led-42 {
 			label = "eth61:green";
 			gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@43 {
+		led-43 {
 			label = "eth61:yellow";
 			gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@44 {
+		led-44 {
 			label = "eth62:green";
 			gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@45 {
+		led-45 {
 			label = "eth62:yellow";
 			gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@46 {
+		led-46 {
 			label = "eth63:green";
 			gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@47 {
+		led-47 {
 			label = "eth63:yellow";
 			gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 	};
+
+	sfp_eth12: sfp-eth12 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth13: sfp-eth13 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth14: sfp-eth14 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp3>;
+		tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth15: sfp-eth15 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp4>;
+		tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth48: sfp-eth48 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp5>;
+		tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth49: sfp-eth49 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp6>;
+		tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth50: sfp-eth50 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp7>;
+		tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth51: sfp-eth51 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp8>;
+		tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth52: sfp-eth52 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp9>;
+		tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth53: sfp-eth53 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp10>;
+		tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth54: sfp-eth54 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp11>;
+		tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth55: sfp-eth55 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp12>;
+		tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth56: sfp-eth56 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp13>;
+		tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth57: sfp-eth57 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp14>;
+		tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth58: sfp-eth58 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp15>;
+		tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth59: sfp-eth59 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp16>;
+		tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth60: sfp-eth60 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp17>;
+		tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth61: sfp-eth61 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp18>;
+		tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth62: sfp-eth62 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp19>;
+		tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth63: sfp-eth63 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp20>;
+		tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &sgpio0 {
@@ -274,15 +468,6 @@
 
 &spi0 {
 	status = "okay";
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <8000000>;
-		reg = <0>;
-	};
-};
-
-&spi0 {
-	status = "okay";
 	spi@0 {
 		compatible = "spi-mux";
 		mux-controls = <&mux>;
@@ -325,90 +510,75 @@
 };
 
 &gpio {
-	i2cmux_pins_i: i2cmux-pins-i {
+	i2cmux_pins_i: i2cmux-pins {
 	       pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19",
 		      "GPIO_20", "GPIO_22", "GPIO_36", "GPIO_35",
 		      "GPIO_50", "GPIO_51", "GPIO_56", "GPIO_57";
 		function = "twi_scl_m";
 		output-low;
 	};
-	i2cmux_0: i2cmux-0 {
+	i2cmux_0: i2cmux-0-pins {
 		pins = "GPIO_16";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_1: i2cmux-1 {
+	i2cmux_1: i2cmux-1-pins {
 		pins = "GPIO_17";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_2: i2cmux-2 {
+	i2cmux_2: i2cmux-2-pins {
 		pins = "GPIO_18";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_3: i2cmux-3 {
+	i2cmux_3: i2cmux-3-pins {
 		pins = "GPIO_19";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_4: i2cmux-4 {
+	i2cmux_4: i2cmux-4-pins {
 		pins = "GPIO_20";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_5: i2cmux-5 {
+	i2cmux_5: i2cmux-5-pins {
 		pins = "GPIO_22";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_6: i2cmux-6 {
+	i2cmux_6: i2cmux-6-pins {
 		pins = "GPIO_36";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_7: i2cmux-7 {
+	i2cmux_7: i2cmux-7-pins {
 		pins = "GPIO_35";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_8: i2cmux-8 {
+	i2cmux_8: i2cmux-8-pins {
 		pins = "GPIO_50";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_9: i2cmux-9 {
+	i2cmux_9: i2cmux-9-pins {
 		pins = "GPIO_51";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_10: i2cmux-10 {
+	i2cmux_10: i2cmux-10-pins {
 		pins = "GPIO_56";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_11: i2cmux-11 {
+	i2cmux_11: i2cmux-11-pins {
 		pins = "GPIO_57";
 		function = "twi_scl_m";
 		output-high;
 	};
 };
 
-&axi {
-	i2c0_imux: i2c0-imux@0 {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-parent = <&i2c0>;
-	};
-	i2c0_emux: i2c0-emux@0 {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-parent = <&i2c0>;
-	};
-};
-
 &i2c0_imux {
 	pinctrl-names =
 		"i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4",
@@ -427,62 +597,62 @@
 	pinctrl-10 = <&i2cmux_10>;
 	pinctrl-11 = <&i2cmux_11>;
 	pinctrl-12 = <&i2cmux_pins_i>;
-	i2c_sfp1: i2c_sfp1 {
+	i2c_sfp1: i2c@0 {
 		reg = <0x0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp2: i2c_sfp2 {
+	i2c_sfp2: i2c@1 {
 		reg = <0x1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp3: i2c_sfp3 {
+	i2c_sfp3: i2c@2 {
 		reg = <0x2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp4: i2c_sfp4 {
+	i2c_sfp4: i2c@3 {
 		reg = <0x3>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp5: i2c_sfp5 {
+	i2c_sfp5: i2c@4 {
 		reg = <0x4>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp6: i2c_sfp6 {
+	i2c_sfp6: i2c@5 {
 		reg = <0x5>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp7: i2c_sfp7 {
+	i2c_sfp7: i2c@6 {
 		reg = <0x6>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp8: i2c_sfp8 {
+	i2c_sfp8: i2c@7 {
 		reg = <0x7>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp9: i2c_sfp9 {
+	i2c_sfp9: i2c@8 {
 		reg = <0x8>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp10: i2c_sfp10 {
+	i2c_sfp10: i2c@9 {
 		reg = <0x9>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp11: i2c_sfp11 {
+	i2c_sfp11: i2c@a {
 		reg = <0xa>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp12: i2c_sfp12 {
+	i2c_sfp12: i2c@b {
 		reg = <0xb>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -495,42 +665,42 @@
 		     &gpio 61 GPIO_ACTIVE_HIGH
 		     &gpio 54 GPIO_ACTIVE_HIGH>;
 	idle-state = <0x8>;
-	i2c_sfp13: i2c_sfp13 {
+	i2c_sfp13: i2c@0 {
 		reg = <0x0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp14: i2c_sfp14 {
+	i2c_sfp14: i2c@1 {
 		reg = <0x1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp15: i2c_sfp15 {
+	i2c_sfp15: i2c@2 {
 		reg = <0x2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp16: i2c_sfp16 {
+	i2c_sfp16: i2c@3 {
 		reg = <0x3>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp17: i2c_sfp17 {
+	i2c_sfp17: i2c@4 {
 		reg = <0x4>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp18: i2c_sfp18 {
+	i2c_sfp18: i2c@5 {
 		reg = <0x5>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp19: i2c_sfp19 {
+	i2c_sfp19: i2c@6 {
 		reg = <0x6>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp20: i2c_sfp20 {
+	i2c_sfp20: i2c@7 {
 		reg = <0x7>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -538,175 +708,12 @@
 };
 
 &mdio3 {
-	status = "ok";
+	status = "okay";
 	phy64: ethernet-phy@64 {
 		reg = <28>;
 	};
 };
 
-&axi {
-	sfp_eth12: sfp-eth12 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp1>;
-		tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth13: sfp-eth13 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp2>;
-		tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth14: sfp-eth14 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp3>;
-		tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth15: sfp-eth15 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp4>;
-		tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth48: sfp-eth48 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp5>;
-		tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth49: sfp-eth49 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp6>;
-		tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth50: sfp-eth50 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp7>;
-		tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth51: sfp-eth51 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp8>;
-		tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth52: sfp-eth52 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp9>;
-		tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth53: sfp-eth53 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp10>;
-		tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth54: sfp-eth54 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp11>;
-		tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth55: sfp-eth55 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp12>;
-		tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth56: sfp-eth56 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp13>;
-		tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth57: sfp-eth57 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp14>;
-		tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth58: sfp-eth58 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp15>;
-		tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth59: sfp-eth59 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp16>;
-		tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth60: sfp-eth60 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp17>;
-		tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth61: sfp-eth61 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp18>;
-		tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth62: sfp-eth62 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp19>;
-		tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth63: sfp-eth63 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp20>;
-		tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
-	};
-};
-
 &switch {
 	ethernet-ports {
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
index ec90bda7ed6a..196868898f49 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
@@ -13,74 +13,121 @@
 		priority = <200>;
 	};
 
+	i2c0_imux: i2c-mux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		led@0 {
+		led-0 {
 			label = "eth60:yellow";
 			gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@1 {
+		led-1 {
 			label = "eth60:green";
 			gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@2 {
+		led-2 {
 			label = "eth61:yellow";
 			gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@3 {
+		led-3 {
 			label = "eth61:green";
 			gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@4 {
+		led-4 {
 			label = "eth62:yellow";
 			gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@5 {
+		led-5 {
 			label = "eth62:green";
 			gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@6 {
+		led-6 {
 			label = "eth63:yellow";
 			gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-		led@7 {
+		led-7 {
 			label = "eth63:green";
 			gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 	};
+
+	sfp_eth60: sfp-eth60 {
+		compatible	 = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth61: sfp-eth61 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth62: sfp-eth62 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp3>;
+		tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth63: sfp-eth63 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp4>;
+		tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &gpio {
-	i2cmux_pins_i: i2cmux-pins-i {
+	i2cmux_pins_i: i2cmux-pins {
 	       pins = "GPIO_35", "GPIO_36",
 		      "GPIO_50", "GPIO_51";
 		function = "twi_scl_m";
 		output-low;
 	};
-	i2cmux_s29: i2cmux-0 {
+	i2cmux_s29: i2cmux-0-pins {
 		pins = "GPIO_35";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_s30: i2cmux-1 {
+	i2cmux_s30: i2cmux-1-pins {
 		pins = "GPIO_36";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_s31: i2cmux-2 {
+	i2cmux_s31: i2cmux-2-pins {
 		pins = "GPIO_50";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_s32: i2cmux-3 {
+	i2cmux_s32: i2cmux-3-pins {
 		pins = "GPIO_51";
 		function = "twi_scl_m";
 		output-high;
@@ -89,15 +136,6 @@
 
 &spi0 {
 	status = "okay";
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <8000000>;
-		reg = <0>;
-	};
-};
-
-&spi0 {
-	status = "okay";
 	spi@0 {
 		compatible = "spi-mux";
 		mux-controls = <&mux>;
@@ -128,15 +166,6 @@
 	microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
 };
 
-&axi {
-	i2c0_imux: i2c0-imux@0 {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-parent = <&i2c0>;
-	};
-};
-
 &i2c0_imux {
 	pinctrl-names =
 		"i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4",
@@ -146,69 +175,30 @@
 	pinctrl-2 = <&i2cmux_s31>;
 	pinctrl-3 = <&i2cmux_s32>;
 	pinctrl-4 = <&i2cmux_pins_i>;
-	i2c_sfp1: i2c_sfp1 {
+	i2c_sfp1: i2c@0 {
 		reg = <0x0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp2: i2c_sfp2 {
+	i2c_sfp2: i2c@1 {
 		reg = <0x1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp3: i2c_sfp3 {
+	i2c_sfp3: i2c@2 {
 		reg = <0x2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
-	i2c_sfp4: i2c_sfp4 {
+	i2c_sfp4: i2c@3 {
 		reg = <0x3>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
 };
 
-&axi {
-	sfp_eth60: sfp-eth60 {
-		compatible	 = "sff,sfp";
-		i2c-bus = <&i2c_sfp1>;
-		tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
-		rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>;
-		los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth61: sfp-eth61 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp2>;
-		tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
-		rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>;
-		los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth62: sfp-eth62 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp3>;
-		tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
-		rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>;
-		los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth63: sfp-eth63 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp4>;
-		tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
-		rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>;
-		los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
-	};
-};
-
 &mdio0 {
-	status = "ok";
+	status = "okay";
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};
@@ -284,7 +274,7 @@
 };
 
 &mdio1 {
-	status = "ok";
+	status = "okay";
 	phy24: ethernet-phy@24 {
 		reg = <0>;
 	};
@@ -360,7 +350,7 @@
 };
 
 &mdio3 {
-	status = "ok";
+	status = "okay";
 	phy64: ethernet-phy@64 {
 		reg = <28>;
 	};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
index 9d1a082de3e2..83bf5c81b5f7 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
@@ -6,6 +6,20 @@
 /dts-v1/;
 #include "sparx5.dtsi"
 
+&psci {
+	status = "disabled";
+};
+
+&cpu0 {
+	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
+};
+
+&cpu1 {
+	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/nuvoton/Makefile b/arch/arm64/boot/dts/nuvoton/Makefile
index a99dab90472a..3bc9787801a5 100644
--- a/arch/arm64/boot/dts/nuvoton/Makefile
+++ b/arch/arm64/boot/dts/nuvoton/Makefile
@@ -1,2 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MA35) += ma35d1-iot-512m.dtb
+dtb-$(CONFIG_ARCH_MA35) += ma35d1-som-256m.dtb
 dtb-$(CONFIG_ARCH_NPCM) += nuvoton-npcm845-evb.dtb
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
new file mode 100644
index 000000000000..9482bec1aa57
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Shan-Chun Hung <schung@nuvoton.com>
+ *         Jacky huang <ychuang3@nuvoton.com>
+ */
+
+/dts-v1/;
+#include "ma35d1.dtsi"
+
+/ {
+	model = "Nuvoton MA35D1-IoT";
+	compatible = "nuvoton,ma35d1-iot", "nuvoton,ma35d1";
+
+	aliases {
+		serial0 = &uart0;
+		serial10 = &uart10;
+		serial12 = &uart12;
+		serial13 = &uart13;
+		serial14 = &uart14;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	mem: memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x20000000>; /* 512M DRAM */
+	};
+
+	clk_hxt: clock-hxt {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clk_hxt";
+	};
+};
+
+&clk {
+	assigned-clocks = <&clk CAPLL>,
+			  <&clk DDRPLL>,
+			  <&clk APLL>,
+			  <&clk EPLL>,
+			  <&clk VPLL>;
+	assigned-clock-rates = <800000000>,
+			       <266000000>,
+			       <180000000>,
+			       <500000000>,
+			       <102000000>;
+	nuvoton,pll-mode = "integer",
+			   "fractional",
+			   "integer",
+			   "integer",
+			   "integer";
+};
+
+&pinctrl {
+	uart-grp {
+		pinctrl_uart0: uart0-pins {
+			nuvoton,pins = <4 14 1>,
+				       <4 15 1>;
+			bias-disable;
+			power-source = <1>;
+		};
+
+		pinctrl_uart10: uart10-pins {
+			nuvoton,pins = <7 4 2>,
+				       <7 5 2>,
+				       <7 6 2>,
+				       <7 7 2>;
+			bias-disable;
+			power-source = <1>;
+		};
+
+		pinctrl_uart12: uart12-pins {
+			nuvoton,pins = <2 13 2>,
+				       <2 14 2>,
+				       <2 15 2>;
+			bias-disable;
+			power-source = <1>;
+		};
+
+		pinctrl_uart13: uart13-pins {
+			nuvoton,pins = <7 12 3>,
+				       <7 13 3>;
+			bias-disable;
+			power-source = <1>;
+		};
+
+		pinctrl_uart14: uart14-pins {
+			nuvoton,pins = <7 14 2>,
+				       <7 15 2>;
+			bias-disable;
+			power-source = <1>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart10 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart10>;
+	status = "okay";
+};
+
+&uart12 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart12>;
+	status = "okay";
+};
+
+&uart13 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart13>;
+	status = "okay";
+};
+
+&uart14 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart14>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
new file mode 100644
index 000000000000..f6f20a17e501
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Shan-Chun Hung <schung@nuvoton.com>
+ *         Jacky huang <ychuang3@nuvoton.com>
+ */
+
+/dts-v1/;
+#include "ma35d1.dtsi"
+
+/ {
+	model = "Nuvoton MA35D1-SOM";
+	compatible = "nuvoton,ma35d1-som", "nuvoton,ma35d1";
+
+	aliases {
+		serial0 = &uart0;
+		serial11 = &uart11;
+		serial12 = &uart12;
+		serial14 = &uart14;
+		serial16 = &uart16;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	mem: memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x10000000>; /* 256M DRAM */
+	};
+
+	clk_hxt: clock-hxt {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clk_hxt";
+	};
+};
+
+&clk {
+	assigned-clocks = <&clk CAPLL>,
+			  <&clk DDRPLL>,
+			  <&clk APLL>,
+			  <&clk EPLL>,
+			  <&clk VPLL>;
+	assigned-clock-rates = <800000000>,
+			       <266000000>,
+			       <180000000>,
+			       <500000000>,
+			       <102000000>;
+	nuvoton,pll-mode = "integer",
+			   "fractional",
+			   "integer",
+			   "integer",
+			   "integer";
+};
+
+&pinctrl {
+	uart-grp {
+		pinctrl_uart0: uart0-pins {
+			nuvoton,pins = <4 14 1>,
+				       <4 15 1>;
+			bias-disable;
+			power-source = <1>;
+		};
+
+		pinctrl_uart11: uart11-pins {
+			nuvoton,pins = <11 0 2>,
+				       <11 1 2>,
+				       <11 2 2>,
+				       <11 3 2>;
+			bias-disable;
+			power-source = <1>;
+		};
+
+		pinctrl_uart12: uart12-pins {
+			nuvoton,pins = <8 1 2>,
+				       <8 2 2>,
+				       <8 3 2>;
+			bias-disable;
+			power-source = <1>;
+		};
+
+		pinctrl_uart14: uart14-pins {
+			nuvoton,pins = <8 5 2>,
+				       <8 6 2>,
+				       <8 7 2>;
+			bias-disable;
+			power-source = <1>;
+		};
+
+		pinctrl_uart16: uart16-pins {
+			nuvoton,pins = <10 0 2>,
+				       <10 1 2>,
+				       <10 2 2>,
+				       <10 3 2>;
+			bias-disable;
+			power-source = <1>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart11 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart11>;
+	status = "okay";
+};
+
+&uart12 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart12>;
+	status = "okay";
+};
+
+&uart14 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart14>;
+	status = "okay";
+};
+
+&uart16 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart16>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
new file mode 100644
index 000000000000..e51b98f5bdce
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Shan-Chun Hung <schung@nuvoton.com>
+ *         Jacky huang <ychuang3@nuvoton.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+#include <dt-bindings/reset/nuvoton,ma35d1-reset.h>
+
+/ {
+	compatible = "nuvoton,ma35d1";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	gic: interrupt-controller@50801000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0x50801000 0 0x1000>, /* GICD */
+		      <0x0 0x50802000 0 0x2000>, /* GICC */
+		      <0x0 0x50804000 0 0x2000>, /* GICH */
+		      <0x0 0x50806000 0 0x2000>; /* GICV */
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0x13) |
+			      IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
+		interrupt-parent = <&gic>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		sys: system-management@40460000 {
+			compatible = "nuvoton,ma35d1-reset", "syscon";
+			reg = <0x0 0x40460000 0x0 0x200>;
+			#reset-cells = <1>;
+		};
+
+		clk: clock-controller@40460200 {
+			compatible = "nuvoton,ma35d1-clk";
+			reg = <0x00000000 0x40460200 0x0 0x100>;
+			#clock-cells = <1>;
+			clocks = <&clk_hxt>;
+		};
+
+		pinctrl: pinctrl@40040000 {
+			compatible = "nuvoton,ma35d1-pinctrl";
+			reg = <0x0 0x40040000 0x0 0xc00>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			nuvoton,sys = <&sys>;
+			ranges = <0x0 0x0 0x40040000 0x400>;
+
+			gpioa: gpio@0 {
+				reg = <0x0 0x40>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPA_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiob: gpio@40 {
+				reg = <0x40 0x40>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPB_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpioc: gpio@80 {
+				reg = <0x80 0x40>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPC_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiod: gpio@c0 {
+				reg = <0xc0 0x40>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPD_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpioe: gpio@100 {
+				reg = <0x100 0x40>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPE_GATE>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiof: gpio@140 {
+				reg = <0x140 0x40>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPF_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiog: gpio@180 {
+				reg = <0x180 0x40>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPG_GATE>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpioh: gpio@1c0 {
+				reg = <0x1c0 0x40>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPH_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpioi: gpio@200 {
+				reg = <0x200 0x40>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPI_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpioj: gpio@240 {
+				reg = <0x240 0x40>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPJ_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiok: gpio@280 {
+				reg = <0x280 0x40>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPK_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiol: gpio@2c0 {
+				reg = <0x2c0 0x40>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPL_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiom: gpio@300 {
+				reg = <0x300 0x40>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPM_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpion: gpio@340 {
+				reg = <0x340 0x40>;
+				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk GPN_GATE>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		uart0: serial@40700000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40700000 0x0 0x100>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART0_GATE>;
+			status = "disabled";
+		};
+
+		uart1: serial@40710000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40710000 0x0 0x100>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART1_GATE>;
+			status = "disabled";
+		};
+
+		uart2: serial@40720000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40720000 0x0 0x100>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART2_GATE>;
+			status = "disabled";
+		};
+
+		uart3: serial@40730000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40730000 0x0 0x100>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART3_GATE>;
+			status = "disabled";
+		};
+
+		uart4: serial@40740000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40740000 0x0 0x100>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART4_GATE>;
+			status = "disabled";
+		};
+
+		uart5: serial@40750000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40750000 0x0 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART5_GATE>;
+			status = "disabled";
+		};
+
+		uart6: serial@40760000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40760000 0x0 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART6_GATE>;
+			status = "disabled";
+		};
+
+		uart7: serial@40770000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40770000 0x0 0x100>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART7_GATE>;
+			status = "disabled";
+		};
+
+		uart8: serial@40780000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40780000 0x0 0x100>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART8_GATE>;
+			status = "disabled";
+		};
+
+		uart9: serial@40790000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40790000 0x0 0x100>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART9_GATE>;
+			status = "disabled";
+		};
+
+		uart10: serial@407a0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407a0000 0x0 0x100>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART10_GATE>;
+			status = "disabled";
+		};
+
+		uart11: serial@407b0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407b0000 0x0 0x100>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART11_GATE>;
+			status = "disabled";
+		};
+
+		uart12: serial@407c0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407c0000 0x0 0x100>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART12_GATE>;
+			status = "disabled";
+		};
+
+		uart13: serial@407d0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407d0000 0x0 0x100>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART13_GATE>;
+			status = "disabled";
+		};
+
+		uart14: serial@407e0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407e0000 0x0 0x100>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART14_GATE>;
+			status = "disabled";
+		};
+
+		uart15: serial@407f0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407f0000 0x0 0x100>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART15_GATE>;
+			status = "disabled";
+		};
+
+		uart16: serial@40880000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40880000 0x0 0x100>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART16_GATE>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
index aa7aac8c3774..24133528b8e9 100644
--- a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
@@ -32,11 +32,6 @@
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			#address-cells = <0>;
-			ppi-partitions {
-				ppi_cluster0: interrupt-partition-0 {
-					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
-				};
-			};
 		};
 	};
 
@@ -47,17 +42,13 @@
 		interrupt-parent = <&gic>;
 		ranges;
 
-		rstc: reset-controller@f0801000 {
+		clk: rstc: reset-controller@f0801000 {
 			compatible = "nuvoton,npcm845-reset";
-			reg = <0x0 0xf0801000 0x0 0x78>;
-			#reset-cells = <2>;
+			reg = <0x0 0xf0801000 0x0 0xC4>;
 			nuvoton,sysgcr = <&gcr>;
-		};
-
-		clk: clock-controller@f0801000 {
-			compatible = "nuvoton,npcm845-clk";
+			#reset-cells = <2>;
+			clocks = <&refclk>;
 			#clock-cells = <1>;
-			reg = <0x0 0xf0801000 0x0 0x1000>;
 		};
 
 		apb {
@@ -68,11 +59,20 @@
 			ranges = <0x0 0x0 0xf0000000 0x00300000>,
 				<0xfff00000 0x0 0xfff00000 0x00016000>;
 
+			peci: peci-controller@100000 {
+				compatible = "nuvoton,npcm845-peci";
+				reg = <0x100000 0x1000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk NPCM8XX_CLK_APB3>;
+				cmd-timeout-ms = <1000>;
+				status = "disabled";
+			};
+
 			timer0: timer@8000 {
 				compatible = "nuvoton,npcm845-timer";
 				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x8000 0x1C>;
-				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clocks = <&refclk>;
 				clock-names = "refclk";
 			};
 
@@ -144,7 +144,7 @@
 				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x801c 0x4>;
 				status = "disabled";
-				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clocks = <&refclk>;
 				syscon = <&gcr>;
 			};
 
@@ -153,7 +153,7 @@
 				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x901c 0x4>;
 				status = "disabled";
-				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clocks = <&refclk>;
 				syscon = <&gcr>;
 			};
 
@@ -162,9 +162,723 @@
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xa01c 0x4>;
 				status = "disabled";
-				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clocks = <&refclk>;
 				syscon = <&gcr>;
 			};
 		};
 	};
+
+	pinctrl: pinctrl@f0010000 {
+		compatible = "nuvoton,npcm845-pinctrl";
+		ranges = <0x0 0x0 0xf0010000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nuvoton,sysgcr = <&gcr>;
+		status = "okay";
+		gpio0: gpio@f0010000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x0 0xB0>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 0 32>;
+		};
+		gpio1: gpio@f0011000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x1000 0xB0>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 32 32>;
+		};
+		gpio2: gpio@f0012000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x2000 0xB0>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 64 32>;
+		};
+		gpio3: gpio@f0013000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x3000 0xB0>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 96 32>;
+		};
+		gpio4: gpio@f0014000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x4000 0xB0>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 128 32>;
+		};
+		gpio5: gpio@f0015000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x5000 0xB0>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 160 32>;
+		};
+		gpio6: gpio@f0016000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x6000 0xB0>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 192 32>;
+		};
+		gpio7: gpio@f0017000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x7000 0xB0>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 224 32>;
+		};
+
+		iox1_pins: iox1-mux {
+			groups = "iox1";
+			function = "iox1";
+		};
+		iox2_pins: iox2-mux {
+			groups = "iox2";
+			function = "iox2";
+		};
+		smb1d_pins: smb1d-mux {
+			groups = "smb1d";
+			function = "smb1d";
+		};
+		smb2d_pins: smb2d-mux {
+			groups = "smb2d";
+			function = "smb2d";
+		};
+		lkgpo1_pins: lkgpo1-mux {
+			groups = "lkgpo1";
+			function = "lkgpo1";
+		};
+		lkgpo2_pins: lkgpo2-mux {
+			groups = "lkgpo2";
+			function = "lkgpo2";
+		};
+		ioxh_pins: ioxh-mux {
+			groups = "ioxh";
+			function = "ioxh";
+		};
+		gspi_pins: gspi-mux {
+			groups = "gspi";
+			function = "gspi";
+		};
+		smb5b_pins: smb5b-mux {
+			groups = "smb5b";
+			function = "smb5b";
+		};
+		smb5c_pins: smb5c-mux {
+			groups = "smb5c";
+			function = "smb5c";
+		};
+		lkgpo0_pins: lkgpo0-mux {
+			groups = "lkgpo0";
+			function = "lkgpo0";
+		};
+		pspi_pins: pspi-mux {
+			groups = "pspi";
+			function = "pspi";
+		};
+		jm1_pins: jm1-mux {
+			groups = "jm1";
+			function = "jm1";
+		};
+		jm2_pins: jm2-mux {
+			groups = "jm2";
+			function = "jm2";
+		};
+		smb4b_pins: smb4b-mux {
+			groups = "smb4b";
+			function = "smb4b";
+		};
+		smb4c_pins: smb4c-mux {
+			groups = "smb4c";
+			function = "smb4c";
+		};
+		smb15_pins: smb15-mux {
+			groups = "smb15";
+			function = "smb15";
+		};
+		smb16_pins: smb16-mux {
+			groups = "smb16";
+			function = "smb16";
+		};
+		smb17_pins: smb17-mux {
+			groups = "smb17";
+			function = "smb17";
+		};
+		smb18_pins: smb18-mux {
+			groups = "smb18";
+			function = "smb18";
+		};
+		smb19_pins: smb19-mux {
+			groups = "smb19";
+			function = "smb19";
+		};
+		smb20_pins: smb20-mux {
+			groups = "smb20";
+			function = "smb20";
+		};
+		smb21_pins: smb21-mux {
+			groups = "smb21";
+			function = "smb21";
+		};
+		smb22_pins: smb22-mux {
+			groups = "smb22";
+			function = "smb22";
+		};
+		smb23_pins: smb23-mux {
+			groups = "smb23";
+			function = "smb23";
+		};
+		smb23b_pins: smb23b-mux {
+			groups = "smb23b";
+			function = "smb23b";
+		};
+		smb4d_pins: smb4d-mux {
+			groups = "smb4d";
+			function = "smb4d";
+		};
+		smb14_pins: smb14-mux {
+			groups = "smb14";
+			function = "smb14";
+		};
+		smb5_pins: smb5-mux {
+			groups = "smb5";
+			function = "smb5";
+		};
+		smb4_pins: smb4-mux {
+			groups = "smb4";
+			function = "smb4";
+		};
+		smb3_pins: smb3-mux {
+			groups = "smb3";
+			function = "smb3";
+		};
+		spi0cs1_pins: spi0cs1-mux {
+			groups = "spi0cs1";
+			function = "spi0cs1";
+		};
+		spi1cs0_pins: spi1cs0-mux {
+			groups = "spi1cs0";
+			function = "spi1cs0";
+		};
+		spi1cs1_pins: spi1cs1-mux {
+			groups = "spi1cs1";
+			function = "spi1cs1";
+		};
+		spi1cs2_pins: spi1cs2-mux {
+			groups = "spi1cs2";
+			function = "spi1cs2";
+		};
+		spi1cs3_pins: spi1cs3-mux {
+			groups = "spi1cs3";
+			function = "spi1cs3";
+		};
+		smb3c_pins: smb3c-mux {
+			groups = "smb3c";
+			function = "smb3c";
+		};
+		smb3b_pins: smb3b-mux {
+			groups = "smb3b";
+			function = "smb3b";
+		};
+		bmcuart0a_pins: bmcuart0a-mux {
+			groups = "bmcuart0a";
+			function = "bmcuart0a";
+		};
+		uart1_pins: uart1-mux {
+			groups = "uart1";
+			function = "uart1";
+		};
+		jtag2_pins: jtag2-mux {
+			groups = "jtag2";
+			function = "jtag2";
+		};
+		bmcuart1_pins: bmcuart1-mux {
+			groups = "bmcuart1";
+			function = "bmcuart1";
+		};
+		uart2_pins: uart2-mux {
+			groups = "uart2";
+			function = "uart2";
+		};
+		bmcuart0b_pins: bmcuart0b-mux {
+			groups = "bmcuart0b";
+			function = "bmcuart0b";
+		};
+		r1err_pins: r1err-mux {
+			groups = "r1err";
+			function = "r1err";
+		};
+		r1md_pins: r1md-mux {
+			groups = "r1md";
+			function = "r1md";
+		};
+		r1oen_pins: r1oen-mux {
+			groups = "r1oen";
+			function = "r1oen";
+		};
+		r2oen_pins: r2oen-mux {
+			groups = "r2oen";
+			function = "r2oen";
+		};
+		rmii3_pins: rmii3-mux {
+			groups = "rmii3";
+			function = "rmii3";
+		};
+		r3oen_pins: r3oen-mux {
+			groups = "r3oen";
+			function = "r3oen";
+		};
+		smb3d_pins: smb3d-mux {
+			groups = "smb3d";
+			function = "smb3d";
+		};
+		fanin0_pins: fanin0-mux {
+			groups = "fanin0";
+			function = "fanin0";
+		};
+		fanin1_pins: fanin1-mux {
+			groups = "fanin1";
+			function = "fanin1";
+		};
+		fanin2_pins: fanin2-mux {
+			groups = "fanin2";
+			function = "fanin2";
+		};
+		fanin3_pins: fanin3-mux {
+			groups = "fanin3";
+			function = "fanin3";
+		};
+		fanin4_pins: fanin4-mux {
+			groups = "fanin4";
+			function = "fanin4";
+		};
+		fanin5_pins: fanin5-mux {
+			groups = "fanin5";
+			function = "fanin5";
+		};
+		fanin6_pins: fanin6-mux {
+			groups = "fanin6";
+			function = "fanin6";
+		};
+		fanin7_pins: fanin7-mux {
+			groups = "fanin7";
+			function = "fanin7";
+		};
+		fanin8_pins: fanin8-mux {
+			groups = "fanin8";
+			function = "fanin8";
+		};
+		fanin9_pins: fanin9-mux {
+			groups = "fanin9";
+			function = "fanin9";
+		};
+		fanin10_pins: fanin10-mux {
+			groups = "fanin10";
+			function = "fanin10";
+		};
+		fanin11_pins: fanin11-mux {
+			groups = "fanin11";
+			function = "fanin11";
+		};
+		fanin12_pins: fanin12-mux {
+			groups = "fanin12";
+			function = "fanin12";
+		};
+		fanin13_pins: fanin13-mux {
+			groups = "fanin13";
+			function = "fanin13";
+		};
+		fanin14_pins: fanin14-mux {
+			groups = "fanin14";
+			function = "fanin14";
+		};
+		fanin15_pins: fanin15-mux {
+			groups = "fanin15";
+			function = "fanin15";
+		};
+		pwm0_pins: pwm0-mux {
+			groups = "pwm0";
+			function = "pwm0";
+		};
+		pwm1_pins: pwm1-mux {
+			groups = "pwm1";
+			function = "pwm1";
+		};
+		pwm2_pins: pwm2-mux {
+			groups = "pwm2";
+			function = "pwm2";
+		};
+		pwm3_pins: pwm3-mux {
+			groups = "pwm3";
+			function = "pwm3";
+		};
+		r2_pins: r2-mux {
+			groups = "r2";
+			function = "r2";
+		};
+		r2err_pins: r2err-mux {
+			groups = "r2err";
+			function = "r2err";
+		};
+		r2md_pins: r2md-mux {
+			groups = "r2md";
+			function = "r2md";
+		};
+		r3rxer_pins: r3rxer-mux {
+			groups = "r3rxer";
+			function = "r3rxer";
+		};
+		ga20kbc_pins: ga20kbc-mux {
+			groups = "ga20kbc";
+			function = "ga20kbc";
+		};
+		smb5d_pins: smb5d-mux {
+			groups = "smb5d";
+			function = "smb5d";
+		};
+		lpc_pins: lpc-mux {
+			groups = "lpc";
+			function = "lpc";
+		};
+		espi_pins: espi-mux {
+			groups = "espi";
+			function = "espi";
+		};
+		sg1mdio_pins: sg1mdio-mux {
+			groups = "sg1mdio";
+			function = "sg1mdio";
+		};
+		rg2_pins: rg2-mux {
+			groups = "rg2";
+			function = "rg2";
+		};
+		ddr_pins: ddr-mux {
+			groups = "ddr";
+			function = "ddr";
+		};
+		i3c0_pins: i3c0-mux {
+			groups = "i3c0";
+			function = "i3c0";
+		};
+		i3c1_pins: i3c1-mux {
+			groups = "i3c1";
+			function = "i3c1";
+		};
+		i3c2_pins: i3c2-mux {
+			groups = "i3c2";
+			function = "i3c2";
+		};
+		i3c3_pins: i3c3-mux {
+			groups = "i3c3";
+			function = "i3c3";
+		};
+		i3c4_pins: i3c4-mux {
+			groups = "i3c4";
+			function = "i3c4";
+		};
+		i3c5_pins: i3c5-mux {
+			groups = "i3c5";
+			function = "i3c5";
+		};
+		smb0_pins: smb0-mux {
+			groups = "smb0";
+			function = "smb0";
+		};
+		smb1_pins: smb1-mux {
+			groups = "smb1";
+			function = "smb1";
+		};
+		smb2_pins: smb2-mux {
+			groups = "smb2";
+			function = "smb2";
+		};
+		smb2c_pins: smb2c-mux {
+			groups = "smb2c";
+			function = "smb2c";
+		};
+		smb2b_pins: smb2b-mux {
+			groups = "smb2b";
+			function = "smb2b";
+		};
+		smb1c_pins: smb1c-mux {
+			groups = "smb1c";
+			function = "smb1c";
+		};
+		smb1b_pins: smb1b-mux {
+			groups = "smb1b";
+			function = "smb1b";
+		};
+		smb8_pins: smb8-mux {
+			groups = "smb8";
+			function = "smb8";
+		};
+		smb9_pins: smb9-mux {
+			groups = "smb9";
+			function = "smb9";
+		};
+		smb10_pins: smb10-mux {
+			groups = "smb10";
+			function = "smb10";
+		};
+		smb11_pins: smb11-mux {
+			groups = "smb11";
+			function = "smb11";
+		};
+		sd1_pins: sd1-mux {
+			groups = "sd1";
+			function = "sd1";
+		};
+		sd1pwr_pins: sd1pwr-mux {
+			groups = "sd1pwr";
+			function = "sd1pwr";
+		};
+		pwm4_pins: pwm4-mux {
+			groups = "pwm4";
+			function = "pwm4";
+		};
+		pwm5_pins: pwm5-mux {
+			groups = "pwm5";
+			function = "pwm5";
+		};
+		pwm6_pins: pwm6-mux {
+			groups = "pwm6";
+			function = "pwm6";
+		};
+		pwm7_pins: pwm7-mux {
+			groups = "pwm7";
+			function = "pwm7";
+		};
+		pwm8_pins: pwm8-mux {
+			groups = "pwm8";
+			function = "pwm8";
+		};
+		pwm9_pins: pwm9-mux {
+			groups = "pwm9";
+			function = "pwm9";
+		};
+		pwm10_pins: pwm10-mux {
+			groups = "pwm10";
+			function = "pwm10";
+		};
+		pwm11_pins: pwm11-mux {
+			groups = "pwm11";
+			function = "pwm11";
+		};
+		mmc8_pins: mmc8-mux {
+			groups = "mmc8";
+			function = "mmc8";
+		};
+		mmc_pins: mmc-mux {
+			groups = "mmc";
+			function = "mmc";
+		};
+		mmcwp_pins: mmcwp-mux {
+			groups = "mmcwp";
+			function = "mmcwp";
+		};
+		mmccd_pins: mmccd-mux {
+			groups = "mmccd";
+			function = "mmccd";
+		};
+		mmcrst_pins: mmcrst-mux {
+			groups = "mmcrst";
+			function = "mmcrst";
+		};
+		clkout_pins: clkout-mux {
+			groups = "clkout";
+			function = "clkout";
+		};
+		serirq_pins: serirq-mux {
+			groups = "serirq";
+			function = "serirq";
+		};
+		scipme_pins: scipme-mux {
+			groups = "scipme";
+			function = "scipme";
+		};
+		smb6_pins: smb6-mux {
+			groups = "smb6";
+			function = "smb6";
+		};
+		smb6b_pins: smb6b-mux {
+			groups = "smb6b";
+			function = "smb6b";
+		};
+		smb6c_pins: smb6c-mux {
+			groups = "smb6c";
+			function = "smb6c";
+		};
+		smb6d_pins: smb6d-mux {
+			groups = "smb6d";
+			function = "smb6d";
+		};
+		smb7_pins: smb7-mux {
+			groups = "smb7";
+			function = "smb7";
+		};
+		smb7b_pins: smb7b-mux {
+			groups = "smb7b";
+			function = "smb7b";
+		};
+		smb7c_pins: smb7c-mux {
+			groups = "smb7c";
+			function = "smb7c";
+		};
+		smb7d_pins: smb7d-mux {
+			groups = "smb7d";
+			function = "smb7d";
+		};
+		spi1_pins: spi1-mux {
+			groups = "spi1";
+			function = "spi1";
+		};
+		faninx_pins: faninx-mux {
+			groups = "faninx";
+			function = "faninx";
+		};
+		r1_pins: r1-mux {
+			groups = "r1";
+			function = "r1";
+		};
+		spi3_pins: spi3-mux {
+			groups = "spi3";
+			function = "spi3";
+		};
+		spi3cs1_pins: spi3cs1-mux {
+			groups = "spi3cs1";
+			function = "spi3cs1";
+		};
+		spi3quad_pins: spi3quad-mux {
+			groups = "spi3quad";
+			function = "spi3quad";
+		};
+		spi3cs2_pins: spi3cs2-mux {
+			groups = "spi3cs2";
+			function = "spi3cs2";
+		};
+		spi3cs3_pins: spi3cs3-mux {
+			groups = "spi3cs3";
+			function = "spi3cs3";
+		};
+		nprd_smi_pins: nprd-smi-mux {
+			groups = "nprd_smi";
+			function = "nprd_smi";
+		};
+		smi_pins: smi-mux {
+			groups = "smi";
+			function = "smi";
+		};
+		smb0b_pins: smb0b-mux {
+			groups = "smb0b";
+			function = "smb0b";
+		};
+		smb0c_pins: smb0c-mux {
+			groups = "smb0c";
+			function = "smb0c";
+		};
+		smb0den_pins: smb0den-mux {
+			groups = "smb0den";
+			function = "smb0den";
+		};
+		smb0d_pins: smb0d-mux {
+			groups = "smb0d";
+			function = "smb0d";
+		};
+		ddc_pins: ddc-mux {
+			groups = "ddc";
+			function = "ddc";
+		};
+		rg2mdio_pins: rg2mdio-mux {
+			groups = "rg2mdio";
+			function = "rg2mdio";
+		};
+		wdog1_pins: wdog1-mux {
+			groups = "wdog1";
+			function = "wdog1";
+		};
+		wdog2_pins: wdog2-mux {
+			groups = "wdog2";
+			function = "wdog2";
+		};
+		smb12_pins: smb12-mux {
+			groups = "smb12";
+			function = "smb12";
+		};
+		smb13_pins: smb13-mux {
+			groups = "smb13";
+			function = "smb13";
+		};
+		spix_pins: spix-mux {
+			groups = "spix";
+			function = "spix";
+		};
+		spixcs1_pins: spixcs1-mux {
+			groups = "spixcs1";
+			function = "spixcs1";
+		};
+		clkreq_pins: clkreq-mux {
+			groups = "clkreq";
+			function = "clkreq";
+		};
+		hgpio0_pins: hgpio0-mux {
+			groups = "hgpio0";
+			function = "hgpio0";
+		};
+		hgpio1_pins: hgpio1-mux {
+			groups = "hgpio1";
+			function = "hgpio1";
+		};
+		hgpio2_pins: hgpio2-mux {
+			groups = "hgpio2";
+			function = "hgpio2";
+		};
+		hgpio3_pins: hgpio3-mux {
+			groups = "hgpio3";
+			function = "hgpio3";
+		};
+		hgpio4_pins: hgpio4-mux {
+			groups = "hgpio4";
+			function = "hgpio4";
+		};
+		hgpio5_pins: hgpio5-mux {
+			groups = "hgpio5";
+			function = "hgpio5";
+		};
+		hgpio6_pins: hgpio6-mux {
+			groups = "hgpio6";
+			function = "hgpio6";
+		};
+		hgpio7_pins: hgpio7-mux {
+			groups = "hgpio7";
+			function = "hgpio7";
+		};
+		bu4_pins: bu4-mux {
+			groups = "bu4";
+			function = "bu4";
+		};
+		bu4b_pins: bu4b-mux {
+			groups = "bu4b";
+			function = "bu4b";
+		};
+		bu5_pins: bu5-mux {
+			groups = "bu5";
+			function = "bu5";
+		};
+		bu5b_pins: bu5b-mux {
+			groups = "bu5b";
+			function = "bu5b";
+		};
+		bu6_pins: bu6-mux {
+			groups = "bu6";
+			function = "bu6";
+		};
+		gpo187_pins: gpo187-mux {
+			groups = "gpo187";
+			function = "gpo187";
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
index a5ab2bc0f835..2638ee1c3846 100644
--- a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
@@ -16,9 +16,15 @@
 		stdout-path = &serial0;
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
+
+	refclk: refclk-25mhz {
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+		#clock-cells = <0>;
+	};
 };
 
 &serial0 {
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi
index 12118b75c0e6..383938dcd3ce 100644
--- a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi
@@ -49,6 +49,8 @@
 
 		l2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index bc34c9d8846a..171e08c94d5a 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -9,6 +9,10 @@ DTC_FLAGS_tegra194-p2972-0000 := -@
 DTC_FLAGS_tegra194-p3509-0000+p3668-0000 := -@
 DTC_FLAGS_tegra194-p3509-0000+p3668-0001 := -@
 DTC_FLAGS_tegra234-p3737-0000+p3701-0000 := -@
+DTC_FLAGS_tegra234-p3740-0002+p3701-0008 := -@
+DTC_FLAGS_tegra234-p3768-0000+p3767-0000 := -@
+DTC_FLAGS_tegra234-p3768-0000+p3767-0005 := -@
+DTC_FLAGS_tegra264-p3971-0089+p3834-0008 := -@
 
 dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb
@@ -24,3 +28,8 @@ dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb
 dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb
 dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb
 dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0008.dtb
+dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3740-0002+p3701-0008.dtb
+dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0005.dtb
+dtb-$(CONFIG_ARCH_TEGRA_264_SOC) += tegra264-p3971-0089+p3834-0008.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
index d461da0b8049..683ac124523b 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
@@ -9,8 +9,8 @@
 	compatible = "nvidia,norrin", "nvidia,tegra132", "nvidia,tegra124";
 
 	aliases {
-		rtc0 = "/i2c@7000d000/as3722@40";
-		rtc1 = "/rtc@7000e000";
+		rtc0 = &as3722;
+		rtc1 = &tegra_rtc;
 		serial0 = &uarta;
 	};
 
@@ -62,7 +62,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
-		pinmux_default: pinmux@0 {
+		pinmux_default: pinmux {
 			dap_mclk1_pw4 {
 				nvidia,pins = "dap_mclk1_pw4";
 				nvidia,function = "extperiph1";
@@ -531,6 +531,8 @@
 	};
 
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -760,6 +762,7 @@
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
 			reg = <0>;
+			wakeup-source;
 
 			google,cros-ec-spi-msg-delay = <2000>;
 
@@ -1030,6 +1033,14 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
 		switch-lid {
 			label = "Lid";
 			gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
@@ -1038,14 +1049,6 @@
 			debounce-interval = <1>;
 			wakeup-source;
 		};
-
-		key-power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
 	};
 
 	panel: panel {
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 3673f79adf1a..5bcccfef3f7f 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -93,6 +93,8 @@
 		resets = <&tegra_car 28>;
 		reset-names = "host1x";
 
+		iommus = <&mc TEGRA_SWGROUP_HC>;
+
 		#address-cells = <2>;
 		#size-cells = <2>;
 
@@ -338,9 +340,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTA>;
-		clock-names = "serial";
 		resets = <&tegra_car 6>;
-		reset-names = "serial";
 		dmas = <&apbdma 8>, <&apbdma 8>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -352,9 +352,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTB>;
-		clock-names = "serial";
 		resets = <&tegra_car 7>;
-		reset-names = "serial";
 		dmas = <&apbdma 9>, <&apbdma 9>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -366,9 +364,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTC>;
-		clock-names = "serial";
 		resets = <&tegra_car 55>;
-		reset-names = "serial";
 		dmas = <&apbdma 10>, <&apbdma 10>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -380,9 +376,7 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTD>;
-		clock-names = "serial";
 		resets = <&tegra_car 65>;
-		reset-names = "serial";
 		dmas = <&apbdma 19>, <&apbdma 19>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -393,7 +387,6 @@
 		reg = <0x0 0x7000a000 0x0 0x100>;
 		#pwm-cells = <2>;
 		clocks = <&tegra_car TEGRA124_CLK_PWM>;
-		clock-names = "pwm";
 		resets = <&tegra_car 17>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -579,7 +572,7 @@
 		status = "disabled";
 	};
 
-	rtc@7000e000 {
+	tegra_rtc: rtc@7000e000 {
 		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
 		reg = <0x0 0x7000e000 0x0 0x100>;
 		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -894,122 +887,6 @@
 		};
 	};
 
-	thermal-zones {
-		cpu-thermal {
-			polling-delay-passive = <1000>;
-			polling-delay = <0>;
-
-			thermal-sensors =
-				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
-
-			trips {
-				cpu_shutdown_trip {
-					temperature = <105000>;
-					hysteresis = <1000>;
-					type = "critical";
-				};
-
-				cpu_throttle_trip: throttle-trip {
-					temperature = <102000>;
-					hysteresis = <1000>;
-					type = "hot";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu_throttle_trip>;
-					cooling-device = <&throttle_heavy 1 1>;
-				};
-			};
-		};
-
-		mem-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
-			thermal-sensors =
-				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
-
-			trips {
-				mem_shutdown_trip {
-					temperature = <101000>;
-					hysteresis = <1000>;
-					type = "critical";
-				};
-				mem_throttle_trip {
-					temperature = <99000>;
-					hysteresis = <1000>;
-					type = "hot";
-				};
-			};
-
-			cooling-maps {
-				/*
-				 * There are currently no cooling maps,
-				 * because there are no cooling devices.
-				 */
-			};
-		};
-
-		gpu-thermal {
-			polling-delay-passive = <1000>;
-			polling-delay = <0>;
-
-			thermal-sensors =
-				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
-
-			trips {
-				gpu_shutdown_trip {
-					temperature = <101000>;
-					hysteresis = <1000>;
-					type = "critical";
-				};
-
-				gpu_throttle_trip: throttle-trip {
-					temperature = <99000>;
-					hysteresis = <1000>;
-					type = "hot";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&gpu_throttle_trip>;
-					cooling-device = <&throttle_heavy 1 1>;
-				};
-			};
-		};
-
-		pllx-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
-			thermal-sensors =
-				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
-
-			trips {
-				pllx_shutdown_trip {
-					temperature = <105000>;
-					hysteresis = <1000>;
-					type = "critical";
-				};
-				pllx_throttle_trip {
-					temperature = <99000>;
-					hysteresis = <1000>;
-					type = "hot";
-				};
-			};
-
-			cooling-maps {
-				/*
-				 * There are currently no cooling maps,
-				 * because there are no cooling devices.
-				 */
-			};
-		};
-	};
-
 	ahub@70300000 {
 		compatible = "nvidia,tegra124-ahub";
 		reg = <0x0 0x70300000 0x0 0x200>,
@@ -1256,6 +1133,122 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+			trips {
+				cpu_shutdown_trip {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				cpu_throttle_trip: throttle-trip {
+					temperature = <102000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+			trips {
+				mem_shutdown_trip {
+					temperature = <101000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+				mem_throttle_trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+			trips {
+				gpu_shutdown_trip {
+					temperature = <101000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				gpu_throttle_trip: throttle-trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+
+		pllx-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+			trips {
+				pllx_shutdown_trip {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+				pllx_throttle_trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 47cf2013afcc..8b3736cee323 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -13,1095 +13,9 @@
 	aconnect@2900000 {
 		status = "okay";
 
-		dma-controller@2930000 {
-			status = "okay";
-		};
-
-		interrupt-controller@2a40000 {
-			status = "okay";
-		};
-
 		ahub@2900800 {
 			status = "okay";
 
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0x0>;
-
-					xbar_admaif0_ep: endpoint {
-						remote-endpoint = <&admaif0_ep>;
-					};
-				};
-
-				port@1 {
-					reg = <0x1>;
-
-					xbar_admaif1_ep: endpoint {
-						remote-endpoint = <&admaif1_ep>;
-					};
-				};
-
-				port@2 {
-					reg = <0x2>;
-
-					xbar_admaif2_ep: endpoint {
-						remote-endpoint = <&admaif2_ep>;
-					};
-				};
-
-				port@3 {
-					reg = <0x3>;
-
-					xbar_admaif3_ep: endpoint {
-						remote-endpoint = <&admaif3_ep>;
-					};
-				};
-
-				port@4 {
-					reg = <0x4>;
-
-					xbar_admaif4_ep: endpoint {
-						remote-endpoint = <&admaif4_ep>;
-					};
-				};
-
-				port@5 {
-					reg = <0x5>;
-
-					xbar_admaif5_ep: endpoint {
-						remote-endpoint = <&admaif5_ep>;
-					};
-				};
-
-				port@6 {
-					reg = <0x6>;
-
-					xbar_admaif6_ep: endpoint {
-						remote-endpoint = <&admaif6_ep>;
-					};
-				};
-
-				port@7 {
-					reg = <0x7>;
-
-					xbar_admaif7_ep: endpoint {
-						remote-endpoint = <&admaif7_ep>;
-					};
-				};
-
-				port@8 {
-					reg = <0x8>;
-
-					xbar_admaif8_ep: endpoint {
-						remote-endpoint = <&admaif8_ep>;
-					};
-				};
-
-				port@9 {
-					reg = <0x9>;
-
-					xbar_admaif9_ep: endpoint {
-						remote-endpoint = <&admaif9_ep>;
-					};
-				};
-
-				port@a {
-					reg = <0xa>;
-
-					xbar_admaif10_ep: endpoint {
-						remote-endpoint = <&admaif10_ep>;
-					};
-				};
-
-				port@b {
-					reg = <0xb>;
-
-					xbar_admaif11_ep: endpoint {
-						remote-endpoint = <&admaif11_ep>;
-					};
-				};
-
-				port@c {
-					reg = <0xc>;
-
-					xbar_admaif12_ep: endpoint {
-						remote-endpoint = <&admaif12_ep>;
-					};
-				};
-
-				port@d {
-					reg = <0xd>;
-
-					xbar_admaif13_ep: endpoint {
-						remote-endpoint = <&admaif13_ep>;
-					};
-				};
-
-				port@e {
-					reg = <0xe>;
-
-					xbar_admaif14_ep: endpoint {
-						remote-endpoint = <&admaif14_ep>;
-					};
-				};
-
-				port@f {
-					reg = <0xf>;
-
-					xbar_admaif15_ep: endpoint {
-						remote-endpoint = <&admaif15_ep>;
-					};
-				};
-
-				port@10 {
-					reg = <0x10>;
-
-					xbar_admaif16_ep: endpoint {
-						remote-endpoint = <&admaif16_ep>;
-					};
-				};
-
-				port@11 {
-					reg = <0x11>;
-
-					xbar_admaif17_ep: endpoint {
-						remote-endpoint = <&admaif17_ep>;
-					};
-				};
-
-				port@12 {
-					reg = <0x12>;
-
-					xbar_admaif18_ep: endpoint {
-						remote-endpoint = <&admaif18_ep>;
-					};
-				};
-
-				port@13 {
-					reg = <0x13>;
-
-					xbar_admaif19_ep: endpoint {
-						remote-endpoint = <&admaif19_ep>;
-					};
-				};
-
-				xbar_i2s1_port: port@14 {
-					reg = <0x14>;
-
-					xbar_i2s1_ep: endpoint {
-						remote-endpoint = <&i2s1_cif_ep>;
-					};
-				};
-
-				xbar_i2s2_port: port@15 {
-					reg = <0x15>;
-
-					xbar_i2s2_ep: endpoint {
-						remote-endpoint = <&i2s2_cif_ep>;
-					};
-				};
-
-				xbar_i2s3_port: port@16 {
-					reg = <0x16>;
-
-					xbar_i2s3_ep: endpoint {
-						remote-endpoint = <&i2s3_cif_ep>;
-					};
-				};
-
-				xbar_i2s4_port: port@17 {
-					reg = <0x17>;
-
-					xbar_i2s4_ep: endpoint {
-						remote-endpoint = <&i2s4_cif_ep>;
-					};
-				};
-
-				xbar_i2s5_port: port@18 {
-					reg = <0x18>;
-
-					xbar_i2s5_ep: endpoint {
-						remote-endpoint = <&i2s5_cif_ep>;
-					};
-				};
-
-				xbar_i2s6_port: port@19 {
-					reg = <0x19>;
-
-					xbar_i2s6_ep: endpoint {
-						remote-endpoint = <&i2s6_cif_ep>;
-					};
-				};
-
-				xbar_dmic1_port: port@1a {
-					reg = <0x1a>;
-
-					xbar_dmic1_ep: endpoint {
-						remote-endpoint = <&dmic1_cif_ep>;
-					};
-				};
-
-				xbar_dmic2_port: port@1b {
-					reg = <0x1b>;
-
-					xbar_dmic2_ep: endpoint {
-						remote-endpoint = <&dmic2_cif_ep>;
-					};
-				};
-
-				xbar_dmic3_port: port@1c {
-					reg = <0x1c>;
-
-					xbar_dmic3_ep: endpoint {
-						remote-endpoint = <&dmic3_cif_ep>;
-					};
-				};
-
-				xbar_dspk1_port: port@1e {
-					reg = <0x1e>;
-
-					xbar_dspk1_ep: endpoint {
-						remote-endpoint = <&dspk1_cif_ep>;
-					};
-				};
-
-				xbar_dspk2_port: port@1f {
-					reg = <0x1f>;
-
-					xbar_dspk2_ep: endpoint {
-						remote-endpoint = <&dspk2_cif_ep>;
-					};
-				};
-
-				xbar_sfc1_in_port: port@20 {
-					reg = <0x20>;
-
-					xbar_sfc1_in_ep: endpoint {
-						remote-endpoint = <&sfc1_cif_in_ep>;
-					};
-				};
-
-				port@21 {
-					reg = <0x21>;
-
-					xbar_sfc1_out_ep: endpoint {
-						remote-endpoint = <&sfc1_cif_out_ep>;
-					};
-				};
-
-				xbar_sfc2_in_port: port@22 {
-					reg = <0x22>;
-
-					xbar_sfc2_in_ep: endpoint {
-						remote-endpoint = <&sfc2_cif_in_ep>;
-					};
-				};
-
-				port@23 {
-					reg = <0x23>;
-
-					xbar_sfc2_out_ep: endpoint {
-						remote-endpoint = <&sfc2_cif_out_ep>;
-					};
-				};
-
-				xbar_sfc3_in_port: port@24 {
-					reg = <0x24>;
-
-					xbar_sfc3_in_ep: endpoint {
-						remote-endpoint = <&sfc3_cif_in_ep>;
-					};
-				};
-
-				port@25 {
-					reg = <0x25>;
-
-					xbar_sfc3_out_ep: endpoint {
-						remote-endpoint = <&sfc3_cif_out_ep>;
-					};
-				};
-
-				xbar_sfc4_in_port: port@26 {
-					reg = <0x26>;
-
-					xbar_sfc4_in_ep: endpoint {
-						remote-endpoint = <&sfc4_cif_in_ep>;
-					};
-				};
-
-				port@27 {
-					reg = <0x27>;
-
-					xbar_sfc4_out_ep: endpoint {
-						remote-endpoint = <&sfc4_cif_out_ep>;
-					};
-				};
-
-				xbar_mvc1_in_port: port@28 {
-					reg = <0x28>;
-
-					xbar_mvc1_in_ep: endpoint {
-						remote-endpoint = <&mvc1_cif_in_ep>;
-					};
-				};
-
-				port@29 {
-					reg = <0x29>;
-
-					xbar_mvc1_out_ep: endpoint {
-						remote-endpoint = <&mvc1_cif_out_ep>;
-					};
-				};
-
-				xbar_mvc2_in_port: port@2a {
-					reg = <0x2a>;
-
-					xbar_mvc2_in_ep: endpoint {
-						remote-endpoint = <&mvc2_cif_in_ep>;
-					};
-				};
-
-				port@2b {
-					reg = <0x2b>;
-
-					xbar_mvc2_out_ep: endpoint {
-						remote-endpoint = <&mvc2_cif_out_ep>;
-					};
-				};
-
-				xbar_amx1_in1_port: port@2c {
-					reg = <0x2c>;
-
-					xbar_amx1_in1_ep: endpoint {
-						remote-endpoint = <&amx1_in1_ep>;
-					};
-				};
-
-				xbar_amx1_in2_port: port@2d {
-					reg = <0x2d>;
-
-					xbar_amx1_in2_ep: endpoint {
-						remote-endpoint = <&amx1_in2_ep>;
-					};
-				};
-
-				xbar_amx1_in3_port: port@2e {
-					reg = <0x2e>;
-
-					xbar_amx1_in3_ep: endpoint {
-						remote-endpoint = <&amx1_in3_ep>;
-					};
-				};
-
-				xbar_amx1_in4_port: port@2f {
-					reg = <0x2f>;
-
-					xbar_amx1_in4_ep: endpoint {
-						remote-endpoint = <&amx1_in4_ep>;
-					};
-				};
-
-				port@30 {
-					reg = <0x30>;
-
-					xbar_amx1_out_ep: endpoint {
-						remote-endpoint = <&amx1_out_ep>;
-					};
-				};
-
-				xbar_amx2_in1_port: port@31 {
-					reg = <0x31>;
-
-					xbar_amx2_in1_ep: endpoint {
-						remote-endpoint = <&amx2_in1_ep>;
-					};
-				};
-
-				xbar_amx2_in2_port: port@32 {
-					reg = <0x32>;
-
-					xbar_amx2_in2_ep: endpoint {
-						remote-endpoint = <&amx2_in2_ep>;
-					};
-				};
-
-				xbar_amx2_in3_port: port@33 {
-					reg = <0x33>;
-
-					xbar_amx2_in3_ep: endpoint {
-						remote-endpoint = <&amx2_in3_ep>;
-					};
-				};
-
-				xbar_amx2_in4_port: port@34 {
-					reg = <0x34>;
-
-					xbar_amx2_in4_ep: endpoint {
-						remote-endpoint = <&amx2_in4_ep>;
-					};
-				};
-
-				port@35 {
-					reg = <0x35>;
-
-					xbar_amx2_out_ep: endpoint {
-						remote-endpoint = <&amx2_out_ep>;
-					};
-				};
-
-				xbar_amx3_in1_port: port@36 {
-					reg = <0x36>;
-
-					xbar_amx3_in1_ep: endpoint {
-						remote-endpoint = <&amx3_in1_ep>;
-					};
-				};
-
-				xbar_amx3_in2_port: port@37 {
-					reg = <0x37>;
-
-					xbar_amx3_in2_ep: endpoint {
-						remote-endpoint = <&amx3_in2_ep>;
-					};
-				};
-
-				xbar_amx3_in3_port: port@38 {
-					reg = <0x38>;
-
-					xbar_amx3_in3_ep: endpoint {
-						remote-endpoint = <&amx3_in3_ep>;
-					};
-				};
-
-				xbar_amx3_in4_port: port@39 {
-					reg = <0x39>;
-
-					xbar_amx3_in4_ep: endpoint {
-						remote-endpoint = <&amx3_in4_ep>;
-					};
-				};
-
-				port@3a {
-					reg = <0x3a>;
-
-					xbar_amx3_out_ep: endpoint {
-						remote-endpoint = <&amx3_out_ep>;
-					};
-				};
-
-				xbar_amx4_in1_port: port@3b {
-					reg = <0x3b>;
-
-					xbar_amx4_in1_ep: endpoint {
-						remote-endpoint = <&amx4_in1_ep>;
-					};
-				};
-
-				xbar_amx4_in2_port: port@3c {
-					reg = <0x3c>;
-
-					xbar_amx4_in2_ep: endpoint {
-						remote-endpoint = <&amx4_in2_ep>;
-					};
-				};
-
-				xbar_amx4_in3_port: port@3d {
-					reg = <0x3d>;
-
-					xbar_amx4_in3_ep: endpoint {
-						remote-endpoint = <&amx4_in3_ep>;
-					};
-				};
-
-				xbar_amx4_in4_port: port@3e {
-					reg = <0x3e>;
-
-					xbar_amx4_in4_ep: endpoint {
-						remote-endpoint = <&amx4_in4_ep>;
-					};
-				};
-
-				port@3f {
-					reg = <0x3f>;
-
-					xbar_amx4_out_ep: endpoint {
-						remote-endpoint = <&amx4_out_ep>;
-					};
-				};
-
-				xbar_adx1_in_port: port@40 {
-					reg = <0x40>;
-
-					xbar_adx1_in_ep: endpoint {
-						remote-endpoint = <&adx1_in_ep>;
-					};
-				};
-
-				port@41 {
-					reg = <0x41>;
-
-					xbar_adx1_out1_ep: endpoint {
-						remote-endpoint = <&adx1_out1_ep>;
-					};
-				};
-
-				port@42 {
-					reg = <0x42>;
-
-					xbar_adx1_out2_ep: endpoint {
-						remote-endpoint = <&adx1_out2_ep>;
-					};
-				};
-
-				port@43 {
-					reg = <0x43>;
-
-					xbar_adx1_out3_ep: endpoint {
-						remote-endpoint = <&adx1_out3_ep>;
-					};
-				};
-
-				port@44 {
-					reg = <0x44>;
-
-					xbar_adx1_out4_ep: endpoint {
-						remote-endpoint = <&adx1_out4_ep>;
-					};
-				};
-
-				xbar_adx2_in_port: port@45 {
-					reg = <0x45>;
-
-					xbar_adx2_in_ep: endpoint {
-						remote-endpoint = <&adx2_in_ep>;
-					};
-				};
-
-				port@46 {
-					reg = <0x46>;
-
-					xbar_adx2_out1_ep: endpoint {
-						remote-endpoint = <&adx2_out1_ep>;
-					};
-				};
-
-				port@47 {
-					reg = <0x47>;
-
-					xbar_adx2_out2_ep: endpoint {
-						remote-endpoint = <&adx2_out2_ep>;
-					};
-				};
-
-				port@48 {
-					reg = <0x48>;
-
-					xbar_adx2_out3_ep: endpoint {
-						remote-endpoint = <&adx2_out3_ep>;
-					};
-				};
-
-				port@49 {
-					reg = <0x49>;
-
-					xbar_adx2_out4_ep: endpoint {
-						remote-endpoint = <&adx2_out4_ep>;
-					};
-				};
-
-				xbar_adx3_in_port: port@4a {
-					reg = <0x4a>;
-
-					xbar_adx3_in_ep: endpoint {
-						remote-endpoint = <&adx3_in_ep>;
-					};
-				};
-
-				port@4b {
-					reg = <0x4b>;
-
-					xbar_adx3_out1_ep: endpoint {
-						remote-endpoint = <&adx3_out1_ep>;
-					};
-				};
-
-				port@4c {
-					reg = <0x4c>;
-
-					xbar_adx3_out2_ep: endpoint {
-						remote-endpoint = <&adx3_out2_ep>;
-					};
-				};
-
-				port@4d {
-					reg = <0x4d>;
-
-					xbar_adx3_out3_ep: endpoint {
-						remote-endpoint = <&adx3_out3_ep>;
-					};
-				};
-
-				port@4e {
-					reg = <0x4e>;
-
-					xbar_adx3_out4_ep: endpoint {
-						remote-endpoint = <&adx3_out4_ep>;
-					};
-				};
-
-				xbar_adx4_in_port: port@4f {
-					reg = <0x4f>;
-
-					xbar_adx4_in_ep: endpoint {
-						remote-endpoint = <&adx4_in_ep>;
-					};
-				};
-
-				port@50 {
-					reg = <0x50>;
-
-					xbar_adx4_out1_ep: endpoint {
-						remote-endpoint = <&adx4_out1_ep>;
-					};
-				};
-
-				port@51 {
-					reg = <0x51>;
-
-					xbar_adx4_out2_ep: endpoint {
-						remote-endpoint = <&adx4_out2_ep>;
-					};
-				};
-
-				port@52 {
-					reg = <0x52>;
-
-					xbar_adx4_out3_ep: endpoint {
-						remote-endpoint = <&adx4_out3_ep>;
-					};
-				};
-
-				port@53 {
-					reg = <0x53>;
-
-					xbar_adx4_out4_ep: endpoint {
-						remote-endpoint = <&adx4_out4_ep>;
-					};
-				};
-
-				xbar_mixer_in1_port: port@54 {
-					reg = <0x54>;
-
-					xbar_mixer_in1_ep: endpoint {
-						remote-endpoint = <&mixer_in1_ep>;
-					};
-				};
-
-				xbar_mixer_in2_port: port@55 {
-					reg = <0x55>;
-
-					xbar_mixer_in2_ep: endpoint {
-						remote-endpoint = <&mixer_in2_ep>;
-					};
-				};
-
-				xbar_mixer_in3_port: port@56 {
-					reg = <0x56>;
-
-					xbar_mixer_in3_ep: endpoint {
-						remote-endpoint = <&mixer_in3_ep>;
-					};
-				};
-
-				xbar_mixer_in4_port: port@57 {
-					reg = <0x57>;
-
-					xbar_mixer_in4_ep: endpoint {
-						remote-endpoint = <&mixer_in4_ep>;
-					};
-				};
-
-				xbar_mixer_in5_port: port@58 {
-					reg = <0x58>;
-
-					xbar_mixer_in5_ep: endpoint {
-						remote-endpoint = <&mixer_in5_ep>;
-					};
-				};
-
-				xbar_mixer_in6_port: port@59 {
-					reg = <0x59>;
-
-					xbar_mixer_in6_ep: endpoint {
-						remote-endpoint = <&mixer_in6_ep>;
-					};
-				};
-
-				xbar_mixer_in7_port: port@5a {
-					reg = <0x5a>;
-
-					xbar_mixer_in7_ep: endpoint {
-						remote-endpoint = <&mixer_in7_ep>;
-					};
-				};
-
-				xbar_mixer_in8_port: port@5b {
-					reg = <0x5b>;
-
-					xbar_mixer_in8_ep: endpoint {
-						remote-endpoint = <&mixer_in8_ep>;
-					};
-				};
-
-				xbar_mixer_in9_port: port@5c {
-					reg = <0x5c>;
-
-					xbar_mixer_in9_ep: endpoint {
-						remote-endpoint = <&mixer_in9_ep>;
-					};
-				};
-
-				xbar_mixer_in10_port: port@5d {
-					reg = <0x5d>;
-
-					xbar_mixer_in10_ep: endpoint {
-						remote-endpoint = <&mixer_in10_ep>;
-					};
-				};
-
-				port@5e {
-					reg = <0x5e>;
-
-					xbar_mixer_out1_ep: endpoint {
-						remote-endpoint = <&mixer_out1_ep>;
-					};
-				};
-
-				port@5f {
-					reg = <0x5f>;
-
-					xbar_mixer_out2_ep: endpoint {
-						remote-endpoint = <&mixer_out2_ep>;
-					};
-				};
-
-				port@60 {
-					reg = <0x60>;
-
-					xbar_mixer_out3_ep: endpoint {
-						remote-endpoint = <&mixer_out3_ep>;
-					};
-				};
-
-				port@61 {
-					reg = <0x61>;
-
-					xbar_mixer_out4_ep: endpoint {
-						remote-endpoint = <&mixer_out4_ep>;
-					};
-				};
-
-				port@62 {
-					reg = <0x62>;
-
-					xbar_mixer_out5_ep: endpoint {
-						remote-endpoint = <&mixer_out5_ep>;
-					};
-				};
-
-				xbar_asrc_in1_port: port@63 {
-					reg = <0x63>;
-
-					xbar_asrc_in1_ep: endpoint {
-						remote-endpoint = <&asrc_in1_ep>;
-					};
-				};
-
-				port@64 {
-					reg = <0x64>;
-
-					xbar_asrc_out1_ep: endpoint {
-						remote-endpoint = <&asrc_out1_ep>;
-					};
-				};
-
-				xbar_asrc_in2_port: port@65 {
-					reg = <0x65>;
-
-					xbar_asrc_in2_ep: endpoint {
-						remote-endpoint = <&asrc_in2_ep>;
-					};
-				};
-
-				port@66 {
-					reg = <0x66>;
-
-					xbar_asrc_out2_ep: endpoint {
-						remote-endpoint = <&asrc_out2_ep>;
-					};
-				};
-
-				xbar_asrc_in3_port: port@67 {
-					reg = <0x67>;
-
-					xbar_asrc_in3_ep: endpoint {
-						remote-endpoint = <&asrc_in3_ep>;
-					};
-				};
-
-				port@68 {
-					reg = <0x68>;
-
-					xbar_asrc_out3_ep: endpoint {
-						remote-endpoint = <&asrc_out3_ep>;
-					};
-				};
-
-				xbar_asrc_in4_port: port@69 {
-					reg = <0x69>;
-
-					xbar_asrc_in4_ep: endpoint {
-						remote-endpoint = <&asrc_in4_ep>;
-					};
-				};
-
-				port@6a {
-					reg = <0x6a>;
-
-					xbar_asrc_out4_ep: endpoint {
-						remote-endpoint = <&asrc_out4_ep>;
-					};
-				};
-
-				xbar_asrc_in5_port: port@6b {
-					reg = <0x6b>;
-
-					xbar_asrc_in5_ep: endpoint {
-						remote-endpoint = <&asrc_in5_ep>;
-					};
-				};
-
-				port@6c {
-					reg = <0x6c>;
-
-					xbar_asrc_out5_ep: endpoint {
-						remote-endpoint = <&asrc_out5_ep>;
-					};
-				};
-
-				xbar_asrc_in6_port: port@6d {
-					reg = <0x6d>;
-
-					xbar_asrc_in6_ep: endpoint {
-						remote-endpoint = <&asrc_in6_ep>;
-					};
-				};
-
-				port@6e {
-					reg = <0x6e>;
-
-					xbar_asrc_out6_ep: endpoint {
-						remote-endpoint = <&asrc_out6_ep>;
-					};
-				};
-
-				xbar_asrc_in7_port: port@6f {
-					reg = <0x6f>;
-
-					xbar_asrc_in7_ep: endpoint {
-						remote-endpoint = <&asrc_in7_ep>;
-					};
-				};
-
-				xbar_ope1_in_port: port@70 {
-					reg = <0x70>;
-
-					xbar_ope1_in_ep: endpoint {
-						remote-endpoint = <&ope1_cif_in_ep>;
-					};
-				};
-
-				port@71 {
-					reg = <0x71>;
-
-					xbar_ope1_out_ep: endpoint {
-						remote-endpoint = <&ope1_cif_out_ep>;
-					};
-				};
-			};
-
-			admaif@290f000 {
-				status = "okay";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					admaif0_port: port@0 {
-						reg = <0x0>;
-
-						admaif0_ep: endpoint {
-							remote-endpoint = <&xbar_admaif0_ep>;
-						};
-					};
-
-					admaif1_port: port@1 {
-						reg = <0x1>;
-
-						admaif1_ep: endpoint {
-							remote-endpoint = <&xbar_admaif1_ep>;
-						};
-					};
-
-					admaif2_port: port@2 {
-						reg = <0x2>;
-
-						admaif2_ep: endpoint {
-							remote-endpoint = <&xbar_admaif2_ep>;
-						};
-					};
-
-					admaif3_port: port@3 {
-						reg = <0x3>;
-
-						admaif3_ep: endpoint {
-							remote-endpoint = <&xbar_admaif3_ep>;
-						};
-					};
-
-					admaif4_port: port@4 {
-						reg = <0x4>;
-
-						admaif4_ep: endpoint {
-							remote-endpoint = <&xbar_admaif4_ep>;
-						};
-					};
-
-					admaif5_port: port@5 {
-						reg = <0x5>;
-
-						admaif5_ep: endpoint {
-							remote-endpoint = <&xbar_admaif5_ep>;
-						};
-					};
-
-					admaif6_port: port@6 {
-						reg = <0x6>;
-
-						admaif6_ep: endpoint {
-							remote-endpoint = <&xbar_admaif6_ep>;
-						};
-					};
-
-					admaif7_port: port@7 {
-						reg = <0x7>;
-
-						admaif7_ep: endpoint {
-							remote-endpoint = <&xbar_admaif7_ep>;
-						};
-					};
-
-					admaif8_port: port@8 {
-						reg = <0x8>;
-
-						admaif8_ep: endpoint {
-							remote-endpoint = <&xbar_admaif8_ep>;
-						};
-					};
-
-					admaif9_port: port@9 {
-						reg = <0x9>;
-
-						admaif9_ep: endpoint {
-							remote-endpoint = <&xbar_admaif9_ep>;
-						};
-					};
-
-					admaif10_port: port@a {
-						reg = <0xa>;
-
-						admaif10_ep: endpoint {
-							remote-endpoint = <&xbar_admaif10_ep>;
-						};
-					};
-
-					admaif11_port: port@b {
-						reg = <0xb>;
-
-						admaif11_ep: endpoint {
-							remote-endpoint = <&xbar_admaif11_ep>;
-						};
-					};
-
-					admaif12_port: port@c {
-						reg = <0xc>;
-
-						admaif12_ep: endpoint {
-							remote-endpoint = <&xbar_admaif12_ep>;
-						};
-					};
-
-					admaif13_port: port@d {
-						reg = <0xd>;
-
-						admaif13_ep: endpoint {
-							remote-endpoint = <&xbar_admaif13_ep>;
-						};
-					};
-
-					admaif14_port: port@e {
-						reg = <0xe>;
-
-						admaif14_ep: endpoint {
-							remote-endpoint = <&xbar_admaif14_ep>;
-						};
-					};
-
-					admaif15_port: port@f {
-						reg = <0xf>;
-
-						admaif15_ep: endpoint {
-							remote-endpoint = <&xbar_admaif15_ep>;
-						};
-					};
-
-					admaif16_port: port@10 {
-						reg = <0x10>;
-
-						admaif16_ep: endpoint {
-							remote-endpoint = <&xbar_admaif16_ep>;
-						};
-					};
-
-					admaif17_port: port@11 {
-						reg = <0x11>;
-
-						admaif17_ep: endpoint {
-							remote-endpoint = <&xbar_admaif17_ep>;
-						};
-					};
-
-					admaif18_port: port@12 {
-						reg = <0x12>;
-
-						admaif18_ep: endpoint {
-							remote-endpoint = <&xbar_admaif18_ep>;
-						};
-					};
-
-					admaif19_port: port@13 {
-						reg = <0x13>;
-
-						admaif19_ep: endpoint {
-							remote-endpoint = <&xbar_admaif19_ep>;
-						};
-					};
-				};
-			};
-
 			i2s@2901000 {
 				status = "okay";
 
@@ -1258,131 +172,6 @@
 				};
 			};
 
-			dmic@2904000 {
-				status = "okay";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-
-						dmic1_cif_ep: endpoint {
-							remote-endpoint = <&xbar_dmic1_ep>;
-						};
-					};
-
-					dmic1_port: port@1 {
-						reg = <1>;
-
-						dmic1_dap_ep: endpoint {
-							/* Place holder for external Codec */
-						};
-					};
-				};
-			};
-
-			dmic@2904100 {
-				status = "okay";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-
-						dmic2_cif_ep: endpoint {
-							remote-endpoint = <&xbar_dmic2_ep>;
-						};
-					};
-
-					dmic2_port: port@1 {
-						reg = <1>;
-
-						dmic2_dap_ep: endpoint {
-							/* Place holder for external Codec */
-						};
-					};
-				};
-			};
-
-			dmic@2904200 {
-				status = "okay";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-
-						dmic3_cif_ep: endpoint {
-							remote-endpoint = <&xbar_dmic3_ep>;
-						};
-					};
-
-					dmic3_port: port@1 {
-						reg = <1>;
-
-						dmic3_dap_ep: endpoint {
-							/* Place holder for external Codec */
-						};
-					};
-				};
-			};
-
-			dspk@2905000 {
-				status = "okay";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-
-						dspk1_cif_ep: endpoint {
-							remote-endpoint = <&xbar_dspk1_ep>;
-						};
-					};
-
-					dspk1_port: port@1 {
-						reg = <1>;
-
-						dspk1_dap_ep: endpoint {
-							/* Place holder for external Codec */
-						};
-					};
-				};
-			};
-
-			dspk@2905100 {
-				status = "okay";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-
-						dspk2_cif_ep: endpoint {
-							remote-endpoint = <&xbar_dspk2_ep>;
-						};
-					};
-
-					dspk2_port: port@1 {
-						reg = <1>;
-
-						dspk2_dap_ep: endpoint {
-							/* Place holder for external Codec */
-						};
-					};
-				};
-			};
-
 			sfc@2902000 {
 				status = "okay";
 
@@ -1485,56 +274,6 @@
 				};
 			};
 
-			mvc@290a000 {
-				status = "okay";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-
-						mvc1_cif_in_ep: endpoint {
-							remote-endpoint = <&xbar_mvc1_in_ep>;
-						};
-					};
-
-					mvc1_out_port: port@1 {
-						reg = <1>;
-
-						mvc1_cif_out_ep: endpoint {
-							remote-endpoint = <&xbar_mvc1_out_ep>;
-						};
-					};
-				};
-			};
-
-			mvc@290a200 {
-				status = "okay";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-
-						mvc2_cif_in_ep: endpoint {
-							remote-endpoint = <&xbar_mvc2_in_ep>;
-						};
-					};
-
-					mvc2_out_port: port@1 {
-						reg = <1>;
-
-						mvc2_cif_out_ep: endpoint {
-							remote-endpoint = <&xbar_mvc2_out_ep>;
-						};
-					};
-				};
-			};
-
 			amx@2903000 {
 				status = "okay";
 
@@ -1927,6 +666,131 @@
 				};
 			};
 
+			dmic@2904000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic1_ep>;
+						};
+					};
+
+					dmic1_port: port@1 {
+						reg = <1>;
+
+						dmic1_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			dmic@2904100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic2_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic2_ep>;
+						};
+					};
+
+					dmic2_port: port@1 {
+						reg = <1>;
+
+						dmic2_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			dmic@2904200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic3_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic3_ep>;
+						};
+					};
+
+					dmic3_port: port@1 {
+						reg = <1>;
+
+						dmic3_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			dspk@2905000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dspk1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dspk1_ep>;
+						};
+					};
+
+					dspk1_port: port@1 {
+						reg = <1>;
+
+						dspk1_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			dspk@2905100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dspk2_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dspk2_ep>;
+						};
+					};
+
+					dspk2_port: port@1 {
+						reg = <1>;
+
+						dspk2_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
 			processing-engine@2908000 {
 				status = "okay";
 
@@ -1952,6 +816,56 @@
 				};
 			};
 
+			mvc@290a000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mvc1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_mvc1_in_ep>;
+						};
+					};
+
+					mvc1_out_port: port@1 {
+						reg = <1>;
+
+						mvc1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_mvc1_out_ep>;
+						};
+					};
+				};
+			};
+
+			mvc@290a200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mvc2_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_mvc2_in_ep>;
+						};
+					};
+
+					mvc2_out_port: port@1 {
+						reg = <1>;
+
+						mvc2_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_mvc2_out_ep>;
+						};
+					};
+				};
+			};
+
 			amixer@290bb00 {
 				status = "okay";
 
@@ -2081,6 +995,175 @@
 				};
 			};
 
+			admaif@290f000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					admaif0_port: port@0 {
+						reg = <0x0>;
+
+						admaif0_ep: endpoint {
+							remote-endpoint = <&xbar_admaif0_ep>;
+						};
+					};
+
+					admaif1_port: port@1 {
+						reg = <0x1>;
+
+						admaif1_ep: endpoint {
+							remote-endpoint = <&xbar_admaif1_ep>;
+						};
+					};
+
+					admaif2_port: port@2 {
+						reg = <0x2>;
+
+						admaif2_ep: endpoint {
+							remote-endpoint = <&xbar_admaif2_ep>;
+						};
+					};
+
+					admaif3_port: port@3 {
+						reg = <0x3>;
+
+						admaif3_ep: endpoint {
+							remote-endpoint = <&xbar_admaif3_ep>;
+						};
+					};
+
+					admaif4_port: port@4 {
+						reg = <0x4>;
+
+						admaif4_ep: endpoint {
+							remote-endpoint = <&xbar_admaif4_ep>;
+						};
+					};
+
+					admaif5_port: port@5 {
+						reg = <0x5>;
+
+						admaif5_ep: endpoint {
+							remote-endpoint = <&xbar_admaif5_ep>;
+						};
+					};
+
+					admaif6_port: port@6 {
+						reg = <0x6>;
+
+						admaif6_ep: endpoint {
+							remote-endpoint = <&xbar_admaif6_ep>;
+						};
+					};
+
+					admaif7_port: port@7 {
+						reg = <0x7>;
+
+						admaif7_ep: endpoint {
+							remote-endpoint = <&xbar_admaif7_ep>;
+						};
+					};
+
+					admaif8_port: port@8 {
+						reg = <0x8>;
+
+						admaif8_ep: endpoint {
+							remote-endpoint = <&xbar_admaif8_ep>;
+						};
+					};
+
+					admaif9_port: port@9 {
+						reg = <0x9>;
+
+						admaif9_ep: endpoint {
+							remote-endpoint = <&xbar_admaif9_ep>;
+						};
+					};
+
+					admaif10_port: port@a {
+						reg = <0xa>;
+
+						admaif10_ep: endpoint {
+							remote-endpoint = <&xbar_admaif10_ep>;
+						};
+					};
+
+					admaif11_port: port@b {
+						reg = <0xb>;
+
+						admaif11_ep: endpoint {
+							remote-endpoint = <&xbar_admaif11_ep>;
+						};
+					};
+
+					admaif12_port: port@c {
+						reg = <0xc>;
+
+						admaif12_ep: endpoint {
+							remote-endpoint = <&xbar_admaif12_ep>;
+						};
+					};
+
+					admaif13_port: port@d {
+						reg = <0xd>;
+
+						admaif13_ep: endpoint {
+							remote-endpoint = <&xbar_admaif13_ep>;
+						};
+					};
+
+					admaif14_port: port@e {
+						reg = <0xe>;
+
+						admaif14_ep: endpoint {
+							remote-endpoint = <&xbar_admaif14_ep>;
+						};
+					};
+
+					admaif15_port: port@f {
+						reg = <0xf>;
+
+						admaif15_ep: endpoint {
+							remote-endpoint = <&xbar_admaif15_ep>;
+						};
+					};
+
+					admaif16_port: port@10 {
+						reg = <0x10>;
+
+						admaif16_ep: endpoint {
+							remote-endpoint = <&xbar_admaif16_ep>;
+						};
+					};
+
+					admaif17_port: port@11 {
+						reg = <0x11>;
+
+						admaif17_ep: endpoint {
+							remote-endpoint = <&xbar_admaif17_ep>;
+						};
+					};
+
+					admaif18_port: port@12 {
+						reg = <0x12>;
+
+						admaif18_ep: endpoint {
+							remote-endpoint = <&xbar_admaif18_ep>;
+						};
+					};
+
+					admaif19_port: port@13 {
+						reg = <0x13>;
+
+						admaif19_ep: endpoint {
+							remote-endpoint = <&xbar_admaif19_ep>;
+						};
+					};
+				};
+			};
+
 			asrc@2910000 {
 				status = "okay";
 
@@ -2184,7 +1267,7 @@
 						};
 					};
 
-					asrc_out6_port:	port@c {
+					asrc_out6_port: port@c {
 						reg = <0xc>;
 
 						asrc_out6_ep: endpoint {
@@ -2193,6 +1276,923 @@
 					};
 				};
 			};
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0x0>;
+
+					xbar_admaif0_ep: endpoint {
+						remote-endpoint = <&admaif0_ep>;
+					};
+				};
+
+				port@1 {
+					reg = <0x1>;
+
+					xbar_admaif1_ep: endpoint {
+						remote-endpoint = <&admaif1_ep>;
+					};
+				};
+
+				port@2 {
+					reg = <0x2>;
+
+					xbar_admaif2_ep: endpoint {
+						remote-endpoint = <&admaif2_ep>;
+					};
+				};
+
+				port@3 {
+					reg = <0x3>;
+
+					xbar_admaif3_ep: endpoint {
+						remote-endpoint = <&admaif3_ep>;
+					};
+				};
+
+				port@4 {
+					reg = <0x4>;
+
+					xbar_admaif4_ep: endpoint {
+						remote-endpoint = <&admaif4_ep>;
+					};
+				};
+
+				port@5 {
+					reg = <0x5>;
+
+					xbar_admaif5_ep: endpoint {
+						remote-endpoint = <&admaif5_ep>;
+					};
+				};
+
+				port@6 {
+					reg = <0x6>;
+
+					xbar_admaif6_ep: endpoint {
+						remote-endpoint = <&admaif6_ep>;
+					};
+				};
+
+				port@7 {
+					reg = <0x7>;
+
+					xbar_admaif7_ep: endpoint {
+						remote-endpoint = <&admaif7_ep>;
+					};
+				};
+
+				port@8 {
+					reg = <0x8>;
+
+					xbar_admaif8_ep: endpoint {
+						remote-endpoint = <&admaif8_ep>;
+					};
+				};
+
+				port@9 {
+					reg = <0x9>;
+
+					xbar_admaif9_ep: endpoint {
+						remote-endpoint = <&admaif9_ep>;
+					};
+				};
+
+				port@a {
+					reg = <0xa>;
+
+					xbar_admaif10_ep: endpoint {
+						remote-endpoint = <&admaif10_ep>;
+					};
+				};
+
+				port@b {
+					reg = <0xb>;
+
+					xbar_admaif11_ep: endpoint {
+						remote-endpoint = <&admaif11_ep>;
+					};
+				};
+
+				port@c {
+					reg = <0xc>;
+
+					xbar_admaif12_ep: endpoint {
+						remote-endpoint = <&admaif12_ep>;
+					};
+				};
+
+				port@d {
+					reg = <0xd>;
+
+					xbar_admaif13_ep: endpoint {
+						remote-endpoint = <&admaif13_ep>;
+					};
+				};
+
+				port@e {
+					reg = <0xe>;
+
+					xbar_admaif14_ep: endpoint {
+						remote-endpoint = <&admaif14_ep>;
+					};
+				};
+
+				port@f {
+					reg = <0xf>;
+
+					xbar_admaif15_ep: endpoint {
+						remote-endpoint = <&admaif15_ep>;
+					};
+				};
+
+				port@10 {
+					reg = <0x10>;
+
+					xbar_admaif16_ep: endpoint {
+						remote-endpoint = <&admaif16_ep>;
+					};
+				};
+
+				port@11 {
+					reg = <0x11>;
+
+					xbar_admaif17_ep: endpoint {
+						remote-endpoint = <&admaif17_ep>;
+					};
+				};
+
+				port@12 {
+					reg = <0x12>;
+
+					xbar_admaif18_ep: endpoint {
+						remote-endpoint = <&admaif18_ep>;
+					};
+				};
+
+				port@13 {
+					reg = <0x13>;
+
+					xbar_admaif19_ep: endpoint {
+						remote-endpoint = <&admaif19_ep>;
+					};
+				};
+
+				xbar_i2s1_port: port@14 {
+					reg = <0x14>;
+
+					xbar_i2s1_ep: endpoint {
+						remote-endpoint = <&i2s1_cif_ep>;
+					};
+				};
+
+				xbar_i2s2_port: port@15 {
+					reg = <0x15>;
+
+					xbar_i2s2_ep: endpoint {
+						remote-endpoint = <&i2s2_cif_ep>;
+					};
+				};
+
+				xbar_i2s3_port: port@16 {
+					reg = <0x16>;
+
+					xbar_i2s3_ep: endpoint {
+						remote-endpoint = <&i2s3_cif_ep>;
+					};
+				};
+
+				xbar_i2s4_port: port@17 {
+					reg = <0x17>;
+
+					xbar_i2s4_ep: endpoint {
+						remote-endpoint = <&i2s4_cif_ep>;
+					};
+				};
+
+				xbar_i2s5_port: port@18 {
+					reg = <0x18>;
+
+					xbar_i2s5_ep: endpoint {
+						remote-endpoint = <&i2s5_cif_ep>;
+					};
+				};
+
+				xbar_i2s6_port: port@19 {
+					reg = <0x19>;
+
+					xbar_i2s6_ep: endpoint {
+						remote-endpoint = <&i2s6_cif_ep>;
+					};
+				};
+
+				xbar_dmic1_port: port@1a {
+					reg = <0x1a>;
+
+					xbar_dmic1_ep: endpoint {
+						remote-endpoint = <&dmic1_cif_ep>;
+					};
+				};
+
+				xbar_dmic2_port: port@1b {
+					reg = <0x1b>;
+
+					xbar_dmic2_ep: endpoint {
+						remote-endpoint = <&dmic2_cif_ep>;
+					};
+				};
+
+				xbar_dmic3_port: port@1c {
+					reg = <0x1c>;
+
+					xbar_dmic3_ep: endpoint {
+						remote-endpoint = <&dmic3_cif_ep>;
+					};
+				};
+
+				xbar_dspk1_port: port@1e {
+					reg = <0x1e>;
+
+					xbar_dspk1_ep: endpoint {
+						remote-endpoint = <&dspk1_cif_ep>;
+					};
+				};
+
+				xbar_dspk2_port: port@1f {
+					reg = <0x1f>;
+
+					xbar_dspk2_ep: endpoint {
+						remote-endpoint = <&dspk2_cif_ep>;
+					};
+				};
+
+				xbar_sfc1_in_port: port@20 {
+					reg = <0x20>;
+
+					xbar_sfc1_in_ep: endpoint {
+						remote-endpoint = <&sfc1_cif_in_ep>;
+					};
+				};
+
+				port@21 {
+					reg = <0x21>;
+
+					xbar_sfc1_out_ep: endpoint {
+						remote-endpoint = <&sfc1_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc2_in_port: port@22 {
+					reg = <0x22>;
+
+					xbar_sfc2_in_ep: endpoint {
+						remote-endpoint = <&sfc2_cif_in_ep>;
+					};
+				};
+
+				port@23 {
+					reg = <0x23>;
+
+					xbar_sfc2_out_ep: endpoint {
+						remote-endpoint = <&sfc2_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc3_in_port: port@24 {
+					reg = <0x24>;
+
+					xbar_sfc3_in_ep: endpoint {
+						remote-endpoint = <&sfc3_cif_in_ep>;
+					};
+				};
+
+				port@25 {
+					reg = <0x25>;
+
+					xbar_sfc3_out_ep: endpoint {
+						remote-endpoint = <&sfc3_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc4_in_port: port@26 {
+					reg = <0x26>;
+
+					xbar_sfc4_in_ep: endpoint {
+						remote-endpoint = <&sfc4_cif_in_ep>;
+					};
+				};
+
+				port@27 {
+					reg = <0x27>;
+
+					xbar_sfc4_out_ep: endpoint {
+						remote-endpoint = <&sfc4_cif_out_ep>;
+					};
+				};
+
+				xbar_mvc1_in_port: port@28 {
+					reg = <0x28>;
+
+					xbar_mvc1_in_ep: endpoint {
+						remote-endpoint = <&mvc1_cif_in_ep>;
+					};
+				};
+
+				port@29 {
+					reg = <0x29>;
+
+					xbar_mvc1_out_ep: endpoint {
+						remote-endpoint = <&mvc1_cif_out_ep>;
+					};
+				};
+
+				xbar_mvc2_in_port: port@2a {
+					reg = <0x2a>;
+
+					xbar_mvc2_in_ep: endpoint {
+						remote-endpoint = <&mvc2_cif_in_ep>;
+					};
+				};
+
+				port@2b {
+					reg = <0x2b>;
+
+					xbar_mvc2_out_ep: endpoint {
+						remote-endpoint = <&mvc2_cif_out_ep>;
+					};
+				};
+
+				xbar_amx1_in1_port: port@2c {
+					reg = <0x2c>;
+
+					xbar_amx1_in1_ep: endpoint {
+						remote-endpoint = <&amx1_in1_ep>;
+					};
+				};
+
+				xbar_amx1_in2_port: port@2d {
+					reg = <0x2d>;
+
+					xbar_amx1_in2_ep: endpoint {
+						remote-endpoint = <&amx1_in2_ep>;
+					};
+				};
+
+				xbar_amx1_in3_port: port@2e {
+					reg = <0x2e>;
+
+					xbar_amx1_in3_ep: endpoint {
+						remote-endpoint = <&amx1_in3_ep>;
+					};
+				};
+
+				xbar_amx1_in4_port: port@2f {
+					reg = <0x2f>;
+
+					xbar_amx1_in4_ep: endpoint {
+						remote-endpoint = <&amx1_in4_ep>;
+					};
+				};
+
+				port@30 {
+					reg = <0x30>;
+
+					xbar_amx1_out_ep: endpoint {
+						remote-endpoint = <&amx1_out_ep>;
+					};
+				};
+
+				xbar_amx2_in1_port: port@31 {
+					reg = <0x31>;
+
+					xbar_amx2_in1_ep: endpoint {
+						remote-endpoint = <&amx2_in1_ep>;
+					};
+				};
+
+				xbar_amx2_in2_port: port@32 {
+					reg = <0x32>;
+
+					xbar_amx2_in2_ep: endpoint {
+						remote-endpoint = <&amx2_in2_ep>;
+					};
+				};
+
+				xbar_amx2_in3_port: port@33 {
+					reg = <0x33>;
+
+					xbar_amx2_in3_ep: endpoint {
+						remote-endpoint = <&amx2_in3_ep>;
+					};
+				};
+
+				xbar_amx2_in4_port: port@34 {
+					reg = <0x34>;
+
+					xbar_amx2_in4_ep: endpoint {
+						remote-endpoint = <&amx2_in4_ep>;
+					};
+				};
+
+				port@35 {
+					reg = <0x35>;
+
+					xbar_amx2_out_ep: endpoint {
+						remote-endpoint = <&amx2_out_ep>;
+					};
+				};
+
+				xbar_amx3_in1_port: port@36 {
+					reg = <0x36>;
+
+					xbar_amx3_in1_ep: endpoint {
+						remote-endpoint = <&amx3_in1_ep>;
+					};
+				};
+
+				xbar_amx3_in2_port: port@37 {
+					reg = <0x37>;
+
+					xbar_amx3_in2_ep: endpoint {
+						remote-endpoint = <&amx3_in2_ep>;
+					};
+				};
+
+				xbar_amx3_in3_port: port@38 {
+					reg = <0x38>;
+
+					xbar_amx3_in3_ep: endpoint {
+						remote-endpoint = <&amx3_in3_ep>;
+					};
+				};
+
+				xbar_amx3_in4_port: port@39 {
+					reg = <0x39>;
+
+					xbar_amx3_in4_ep: endpoint {
+						remote-endpoint = <&amx3_in4_ep>;
+					};
+				};
+
+				port@3a {
+					reg = <0x3a>;
+
+					xbar_amx3_out_ep: endpoint {
+						remote-endpoint = <&amx3_out_ep>;
+					};
+				};
+
+				xbar_amx4_in1_port: port@3b {
+					reg = <0x3b>;
+
+					xbar_amx4_in1_ep: endpoint {
+						remote-endpoint = <&amx4_in1_ep>;
+					};
+				};
+
+				xbar_amx4_in2_port: port@3c {
+					reg = <0x3c>;
+
+					xbar_amx4_in2_ep: endpoint {
+						remote-endpoint = <&amx4_in2_ep>;
+					};
+				};
+
+				xbar_amx4_in3_port: port@3d {
+					reg = <0x3d>;
+
+					xbar_amx4_in3_ep: endpoint {
+						remote-endpoint = <&amx4_in3_ep>;
+					};
+				};
+
+				xbar_amx4_in4_port: port@3e {
+					reg = <0x3e>;
+
+					xbar_amx4_in4_ep: endpoint {
+						remote-endpoint = <&amx4_in4_ep>;
+					};
+				};
+
+				port@3f {
+					reg = <0x3f>;
+
+					xbar_amx4_out_ep: endpoint {
+						remote-endpoint = <&amx4_out_ep>;
+					};
+				};
+
+				xbar_adx1_in_port: port@40 {
+					reg = <0x40>;
+
+					xbar_adx1_in_ep: endpoint {
+						remote-endpoint = <&adx1_in_ep>;
+					};
+				};
+
+				port@41 {
+					reg = <0x41>;
+
+					xbar_adx1_out1_ep: endpoint {
+						remote-endpoint = <&adx1_out1_ep>;
+					};
+				};
+
+				port@42 {
+					reg = <0x42>;
+
+					xbar_adx1_out2_ep: endpoint {
+						remote-endpoint = <&adx1_out2_ep>;
+					};
+				};
+
+				port@43 {
+					reg = <0x43>;
+
+					xbar_adx1_out3_ep: endpoint {
+						remote-endpoint = <&adx1_out3_ep>;
+					};
+				};
+
+				port@44 {
+					reg = <0x44>;
+
+					xbar_adx1_out4_ep: endpoint {
+						remote-endpoint = <&adx1_out4_ep>;
+					};
+				};
+
+				xbar_adx2_in_port: port@45 {
+					reg = <0x45>;
+
+					xbar_adx2_in_ep: endpoint {
+						remote-endpoint = <&adx2_in_ep>;
+					};
+				};
+
+				port@46 {
+					reg = <0x46>;
+
+					xbar_adx2_out1_ep: endpoint {
+						remote-endpoint = <&adx2_out1_ep>;
+					};
+				};
+
+				port@47 {
+					reg = <0x47>;
+
+					xbar_adx2_out2_ep: endpoint {
+						remote-endpoint = <&adx2_out2_ep>;
+					};
+				};
+
+				port@48 {
+					reg = <0x48>;
+
+					xbar_adx2_out3_ep: endpoint {
+						remote-endpoint = <&adx2_out3_ep>;
+					};
+				};
+
+				port@49 {
+					reg = <0x49>;
+
+					xbar_adx2_out4_ep: endpoint {
+						remote-endpoint = <&adx2_out4_ep>;
+					};
+				};
+
+				xbar_adx3_in_port: port@4a {
+					reg = <0x4a>;
+
+					xbar_adx3_in_ep: endpoint {
+						remote-endpoint = <&adx3_in_ep>;
+					};
+				};
+
+				port@4b {
+					reg = <0x4b>;
+
+					xbar_adx3_out1_ep: endpoint {
+						remote-endpoint = <&adx3_out1_ep>;
+					};
+				};
+
+				port@4c {
+					reg = <0x4c>;
+
+					xbar_adx3_out2_ep: endpoint {
+						remote-endpoint = <&adx3_out2_ep>;
+					};
+				};
+
+				port@4d {
+					reg = <0x4d>;
+
+					xbar_adx3_out3_ep: endpoint {
+						remote-endpoint = <&adx3_out3_ep>;
+					};
+				};
+
+				port@4e {
+					reg = <0x4e>;
+
+					xbar_adx3_out4_ep: endpoint {
+						remote-endpoint = <&adx3_out4_ep>;
+					};
+				};
+
+				xbar_adx4_in_port: port@4f {
+					reg = <0x4f>;
+
+					xbar_adx4_in_ep: endpoint {
+						remote-endpoint = <&adx4_in_ep>;
+					};
+				};
+
+				port@50 {
+					reg = <0x50>;
+
+					xbar_adx4_out1_ep: endpoint {
+						remote-endpoint = <&adx4_out1_ep>;
+					};
+				};
+
+				port@51 {
+					reg = <0x51>;
+
+					xbar_adx4_out2_ep: endpoint {
+						remote-endpoint = <&adx4_out2_ep>;
+					};
+				};
+
+				port@52 {
+					reg = <0x52>;
+
+					xbar_adx4_out3_ep: endpoint {
+						remote-endpoint = <&adx4_out3_ep>;
+					};
+				};
+
+				port@53 {
+					reg = <0x53>;
+
+					xbar_adx4_out4_ep: endpoint {
+						remote-endpoint = <&adx4_out4_ep>;
+					};
+				};
+
+				xbar_mixer_in1_port: port@54 {
+					reg = <0x54>;
+
+					xbar_mixer_in1_ep: endpoint {
+						remote-endpoint = <&mixer_in1_ep>;
+					};
+				};
+
+				xbar_mixer_in2_port: port@55 {
+					reg = <0x55>;
+
+					xbar_mixer_in2_ep: endpoint {
+						remote-endpoint = <&mixer_in2_ep>;
+					};
+				};
+
+				xbar_mixer_in3_port: port@56 {
+					reg = <0x56>;
+
+					xbar_mixer_in3_ep: endpoint {
+						remote-endpoint = <&mixer_in3_ep>;
+					};
+				};
+
+				xbar_mixer_in4_port: port@57 {
+					reg = <0x57>;
+
+					xbar_mixer_in4_ep: endpoint {
+						remote-endpoint = <&mixer_in4_ep>;
+					};
+				};
+
+				xbar_mixer_in5_port: port@58 {
+					reg = <0x58>;
+
+					xbar_mixer_in5_ep: endpoint {
+						remote-endpoint = <&mixer_in5_ep>;
+					};
+				};
+
+				xbar_mixer_in6_port: port@59 {
+					reg = <0x59>;
+
+					xbar_mixer_in6_ep: endpoint {
+						remote-endpoint = <&mixer_in6_ep>;
+					};
+				};
+
+				xbar_mixer_in7_port: port@5a {
+					reg = <0x5a>;
+
+					xbar_mixer_in7_ep: endpoint {
+						remote-endpoint = <&mixer_in7_ep>;
+					};
+				};
+
+				xbar_mixer_in8_port: port@5b {
+					reg = <0x5b>;
+
+					xbar_mixer_in8_ep: endpoint {
+						remote-endpoint = <&mixer_in8_ep>;
+					};
+				};
+
+				xbar_mixer_in9_port: port@5c {
+					reg = <0x5c>;
+
+					xbar_mixer_in9_ep: endpoint {
+						remote-endpoint = <&mixer_in9_ep>;
+					};
+				};
+
+				xbar_mixer_in10_port: port@5d {
+					reg = <0x5d>;
+
+					xbar_mixer_in10_ep: endpoint {
+						remote-endpoint = <&mixer_in10_ep>;
+					};
+				};
+
+				port@5e {
+					reg = <0x5e>;
+
+					xbar_mixer_out1_ep: endpoint {
+						remote-endpoint = <&mixer_out1_ep>;
+					};
+				};
+
+				port@5f {
+					reg = <0x5f>;
+
+					xbar_mixer_out2_ep: endpoint {
+						remote-endpoint = <&mixer_out2_ep>;
+					};
+				};
+
+				port@60 {
+					reg = <0x60>;
+
+					xbar_mixer_out3_ep: endpoint {
+						remote-endpoint = <&mixer_out3_ep>;
+					};
+				};
+
+				port@61 {
+					reg = <0x61>;
+
+					xbar_mixer_out4_ep: endpoint {
+						remote-endpoint = <&mixer_out4_ep>;
+					};
+				};
+
+				port@62 {
+					reg = <0x62>;
+
+					xbar_mixer_out5_ep: endpoint {
+						remote-endpoint = <&mixer_out5_ep>;
+					};
+				};
+
+				xbar_asrc_in1_port: port@63 {
+					reg = <0x63>;
+
+					xbar_asrc_in1_ep: endpoint {
+						remote-endpoint = <&asrc_in1_ep>;
+					};
+				};
+
+				port@64 {
+					reg = <0x64>;
+
+					xbar_asrc_out1_ep: endpoint {
+						remote-endpoint = <&asrc_out1_ep>;
+					};
+				};
+
+				xbar_asrc_in2_port: port@65 {
+					reg = <0x65>;
+
+					xbar_asrc_in2_ep: endpoint {
+						remote-endpoint = <&asrc_in2_ep>;
+					};
+				};
+
+				port@66 {
+					reg = <0x66>;
+
+					xbar_asrc_out2_ep: endpoint {
+						remote-endpoint = <&asrc_out2_ep>;
+					};
+				};
+
+				xbar_asrc_in3_port: port@67 {
+					reg = <0x67>;
+
+					xbar_asrc_in3_ep: endpoint {
+						remote-endpoint = <&asrc_in3_ep>;
+					};
+				};
+
+				port@68 {
+					reg = <0x68>;
+
+					xbar_asrc_out3_ep: endpoint {
+						remote-endpoint = <&asrc_out3_ep>;
+					};
+				};
+
+				xbar_asrc_in4_port: port@69 {
+					reg = <0x69>;
+
+					xbar_asrc_in4_ep: endpoint {
+						remote-endpoint = <&asrc_in4_ep>;
+					};
+				};
+
+				port@6a {
+					reg = <0x6a>;
+
+					xbar_asrc_out4_ep: endpoint {
+						remote-endpoint = <&asrc_out4_ep>;
+					};
+				};
+
+				xbar_asrc_in5_port: port@6b {
+					reg = <0x6b>;
+
+					xbar_asrc_in5_ep: endpoint {
+						remote-endpoint = <&asrc_in5_ep>;
+					};
+				};
+
+				port@6c {
+					reg = <0x6c>;
+
+					xbar_asrc_out5_ep: endpoint {
+						remote-endpoint = <&asrc_out5_ep>;
+					};
+				};
+
+				xbar_asrc_in6_port: port@6d {
+					reg = <0x6d>;
+
+					xbar_asrc_in6_ep: endpoint {
+						remote-endpoint = <&asrc_in6_ep>;
+					};
+				};
+
+				port@6e {
+					reg = <0x6e>;
+
+					xbar_asrc_out6_ep: endpoint {
+						remote-endpoint = <&asrc_out6_ep>;
+					};
+				};
+
+				xbar_asrc_in7_port: port@6f {
+					reg = <0x6f>;
+
+					xbar_asrc_in7_ep: endpoint {
+						remote-endpoint = <&asrc_in7_ep>;
+					};
+				};
+
+				xbar_ope1_in_port: port@70 {
+					reg = <0x70>;
+
+					xbar_ope1_in_ep: endpoint {
+						remote-endpoint = <&ope1_cif_in_ep>;
+					};
+				};
+
+				port@71 {
+					reg = <0x71>;
+
+					xbar_ope1_out_ep: endpoint {
+						remote-endpoint = <&ope1_cif_out_ep>;
+					};
+				};
+			};
+		};
+
+		dma-controller@2930000 {
+			status = "okay";
+		};
+
+		interrupt-controller@2a40000 {
+			status = "okay";
 		};
 	};
 
@@ -2283,6 +2283,10 @@
 		vmmc-supply = <&vdd_sd>;
 	};
 
+	sata@3507000 {
+		status = "okay";
+	};
+
 	hda@3510000 {
 		nvidia,model = "NVIDIA Jetson TX2 HDA";
 		status = "okay";
@@ -2390,6 +2394,12 @@
 		phy-names = "usb2-0";
 	};
 
+	cec@3960000 {
+		status = "okay";
+
+		hdmi-phandle = <&sor1>;
+	};
+
 	i2c@c250000 {
 		/* carrier board ID EEPROM */
 		eeprom@57 {
@@ -2405,6 +2415,10 @@
 		};
 	};
 
+	pwm@c340000 {
+		status = "okay";
+	};
+
 	pcie@10003000 {
 		status = "okay";
 
@@ -2471,10 +2485,6 @@
 		};
 	};
 
-	sata@3507000 {
-		status = "okay";
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -2489,25 +2499,35 @@
 			wakeup-source;
 		};
 
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1)
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2)
 					   GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_VOLUMEUP>;
+			linux,code = <KEY_VOLUMEDOWN>;
 			debounce-interval = <10>;
 		};
 
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2)
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1)
 					   GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_VOLUMEDOWN>;
+			linux,code = <KEY_VOLUMEUP>;
 			debounce-interval = <10>;
 		};
 	};
 
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm4 0 45334>;
+		fan-supply = <&vdd_fan>;
+
+		/* cooling level (0, 1, 2, 3) - pwm inverted */
+		cooling-levels = <255 128 64 0>;
+		#cooling-cells = <2>;
+	};
+
 	vdd_sd: regulator-vdd-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "SD_CARD_SW_PWR";
@@ -2556,6 +2576,17 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
+	vdd_fan: regulator-vdd-fan {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_FAN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&exp1 4 GPIO_ACTIVE_LOW>;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
 	sound {
 		compatible = "nvidia,tegra186-audio-graph-card";
 		status = "okay";
@@ -2621,4 +2652,88 @@
 
 		label = "NVIDIA Jetson TX2 APE";
 	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <79000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <62000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <45000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				map1 {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				map2 {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				map3 {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+
+		aux-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				aux_alert0: critical {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				gpu_alert0: critical {
+					temperature = <99000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index aff857df25cf..970ce5a03540 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -61,6 +61,8 @@
 	};
 
 	serial@3100000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -145,6 +147,7 @@
 	/* SDMMC3 (SDIO) */
 	mmc@3440000 {
 		status = "okay";
+		vqmmc-supply = <&vddio_sdmmc3>;
 	};
 
 	/* SDMMC4 (eMMC) */
@@ -190,30 +193,8 @@
 		nvidia,invert-interrupt;
 	};
 
-	cpus {
-		cpu@0 {
-			enable-method = "psci";
-		};
-
-		cpu@1 {
-			enable-method = "psci";
-		};
-
-		cpu@2 {
-			enable-method = "psci";
-		};
-
-		cpu@3 {
-			enable-method = "psci";
-		};
-
-		cpu@4 {
-			enable-method = "psci";
-		};
-
-		cpu@5 {
-			enable-method = "psci";
-		};
+	gpu@17000000 {
+		status = "okay";
 	};
 
 	bpmp {
@@ -235,6 +216,23 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&max77620_default>;
 
+				fps {
+					fps0 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps1 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps2 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+				};
+
 				max77620_default: pinmux {
 					gpio0 {
 						pins = "gpio0";
@@ -284,23 +282,6 @@
 					};
 				};
 
-				fps {
-					fps0 {
-						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
-						maxim,shutdown-fps-time-period-us = <640>;
-					};
-
-					fps1 {
-						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
-						maxim,shutdown-fps-time-period-us = <640>;
-					};
-
-					fps2 {
-						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
-						maxim,shutdown-fps-time-period-us = <640>;
-					};
-				};
-
 				regulators {
 					in-sd0-supply = <&vdd_5v0_sys>;
 					in-sd1-supply = <&vdd_5v0_sys>;
@@ -387,6 +368,32 @@
 		};
 	};
 
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+
+		cpu@4 {
+			enable-method = "psci";
+		};
+
+		cpu@5 {
+			enable-method = "psci";
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		status = "okay";
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
index 3e83a4d52eb1..5f3f572ecea9 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
@@ -56,6 +56,490 @@
 		};
 	};
 
+	aconnect@2900000 {
+		status = "okay";
+
+		ahub@2900800 {
+			status = "okay";
+
+			i2s@2901000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s1_ep>;
+						};
+					};
+
+					i2s1_port: port@1 {
+						reg = <1>;
+
+						i2s1_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@2901200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s3_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s3_ep>;
+						};
+					};
+
+					i2s3_port: port@1 {
+						reg = <1>;
+
+						i2s3_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			dmic@2904000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic1_ep>;
+						};
+					};
+
+					dmic1_port: port@1 {
+						reg = <1>;
+
+						dmic1_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			dmic@2904100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic2_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic2_ep>;
+						};
+					};
+
+					dmic2_port: port@1 {
+						reg = <1>;
+
+						dmic2_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			admaif@290f000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					admaif0_port: port@0 {
+						reg = <0x0>;
+
+						admaif0_ep: endpoint {
+							remote-endpoint = <&xbar_admaif0_ep>;
+						};
+					};
+
+					admaif1_port: port@1 {
+						reg = <0x1>;
+
+						admaif1_ep: endpoint {
+							remote-endpoint = <&xbar_admaif1_ep>;
+						};
+					};
+
+					admaif2_port: port@2 {
+						reg = <0x2>;
+
+						admaif2_ep: endpoint {
+							remote-endpoint = <&xbar_admaif2_ep>;
+						};
+					};
+
+					admaif3_port: port@3 {
+						reg = <0x3>;
+
+						admaif3_ep: endpoint {
+							remote-endpoint = <&xbar_admaif3_ep>;
+						};
+					};
+
+					admaif4_port: port@4 {
+						reg = <0x4>;
+
+						admaif4_ep: endpoint {
+							remote-endpoint = <&xbar_admaif4_ep>;
+						};
+					};
+
+					admaif5_port: port@5 {
+						reg = <0x5>;
+
+						admaif5_ep: endpoint {
+							remote-endpoint = <&xbar_admaif5_ep>;
+						};
+					};
+
+					admaif6_port: port@6 {
+						reg = <0x6>;
+
+						admaif6_ep: endpoint {
+							remote-endpoint = <&xbar_admaif6_ep>;
+						};
+					};
+
+					admaif7_port: port@7 {
+						reg = <0x7>;
+
+						admaif7_ep: endpoint {
+							remote-endpoint = <&xbar_admaif7_ep>;
+						};
+					};
+
+					admaif8_port: port@8 {
+						reg = <0x8>;
+
+						admaif8_ep: endpoint {
+							remote-endpoint = <&xbar_admaif8_ep>;
+						};
+					};
+
+					admaif9_port: port@9 {
+						reg = <0x9>;
+
+						admaif9_ep: endpoint {
+							remote-endpoint = <&xbar_admaif9_ep>;
+						};
+					};
+
+					admaif10_port: port@a {
+						reg = <0xa>;
+
+						admaif10_ep: endpoint {
+							remote-endpoint = <&xbar_admaif10_ep>;
+						};
+					};
+
+					admaif11_port: port@b {
+						reg = <0xb>;
+
+						admaif11_ep: endpoint {
+							remote-endpoint = <&xbar_admaif11_ep>;
+						};
+					};
+
+					admaif12_port: port@c {
+						reg = <0xc>;
+
+						admaif12_ep: endpoint {
+							remote-endpoint = <&xbar_admaif12_ep>;
+						};
+					};
+
+					admaif13_port: port@d {
+						reg = <0xd>;
+
+						admaif13_ep: endpoint {
+							remote-endpoint = <&xbar_admaif13_ep>;
+						};
+					};
+
+					admaif14_port: port@e {
+						reg = <0xe>;
+
+						admaif14_ep: endpoint {
+							remote-endpoint = <&xbar_admaif14_ep>;
+						};
+					};
+
+					admaif15_port: port@f {
+						reg = <0xf>;
+
+						admaif15_ep: endpoint {
+							remote-endpoint = <&xbar_admaif15_ep>;
+						};
+					};
+
+					admaif16_port: port@10 {
+						reg = <0x10>;
+
+						admaif16_ep: endpoint {
+							remote-endpoint = <&xbar_admaif16_ep>;
+						};
+					};
+
+					admaif17_port: port@11 {
+						reg = <0x11>;
+
+						admaif17_ep: endpoint {
+							remote-endpoint = <&xbar_admaif17_ep>;
+						};
+					};
+
+					admaif18_port: port@12 {
+						reg = <0x12>;
+
+						admaif18_ep: endpoint {
+							remote-endpoint = <&xbar_admaif18_ep>;
+						};
+					};
+
+					admaif19_port: port@13 {
+						reg = <0x13>;
+
+						admaif19_ep: endpoint {
+							remote-endpoint = <&xbar_admaif19_ep>;
+						};
+					};
+				};
+			};
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0x0>;
+
+					xbar_admaif0_ep: endpoint {
+						remote-endpoint = <&admaif0_ep>;
+					};
+				};
+
+				port@1 {
+					reg = <0x1>;
+
+					xbar_admaif1_ep: endpoint {
+						remote-endpoint = <&admaif1_ep>;
+					};
+				};
+
+				port@2 {
+					reg = <0x2>;
+
+					xbar_admaif2_ep: endpoint {
+						remote-endpoint = <&admaif2_ep>;
+					};
+				};
+
+				port@3 {
+					reg = <0x3>;
+
+					xbar_admaif3_ep: endpoint {
+						remote-endpoint = <&admaif3_ep>;
+					};
+				};
+
+				port@4 {
+					reg = <0x4>;
+
+					xbar_admaif4_ep: endpoint {
+						remote-endpoint = <&admaif4_ep>;
+					};
+				};
+
+				port@5 {
+					reg = <0x5>;
+
+					xbar_admaif5_ep: endpoint {
+						remote-endpoint = <&admaif5_ep>;
+					};
+				};
+
+				port@6 {
+					reg = <0x6>;
+
+					xbar_admaif6_ep: endpoint {
+						remote-endpoint = <&admaif6_ep>;
+					};
+				};
+
+				port@7 {
+					reg = <0x7>;
+
+					xbar_admaif7_ep: endpoint {
+						remote-endpoint = <&admaif7_ep>;
+					};
+				};
+
+				port@8 {
+					reg = <0x8>;
+
+					xbar_admaif8_ep: endpoint {
+						remote-endpoint = <&admaif8_ep>;
+					};
+				};
+
+				port@9 {
+					reg = <0x9>;
+
+					xbar_admaif9_ep: endpoint {
+						remote-endpoint = <&admaif9_ep>;
+					};
+				};
+
+				port@a {
+					reg = <0xa>;
+
+					xbar_admaif10_ep: endpoint {
+						remote-endpoint = <&admaif10_ep>;
+					};
+				};
+
+				port@b {
+					reg = <0xb>;
+
+					xbar_admaif11_ep: endpoint {
+						remote-endpoint = <&admaif11_ep>;
+					};
+				};
+
+				port@c {
+					reg = <0xc>;
+
+					xbar_admaif12_ep: endpoint {
+						remote-endpoint = <&admaif12_ep>;
+					};
+				};
+
+				port@d {
+					reg = <0xd>;
+
+					xbar_admaif13_ep: endpoint {
+						remote-endpoint = <&admaif13_ep>;
+					};
+				};
+
+				port@e {
+					reg = <0xe>;
+
+					xbar_admaif14_ep: endpoint {
+						remote-endpoint = <&admaif14_ep>;
+					};
+				};
+
+				port@f {
+					reg = <0xf>;
+
+					xbar_admaif15_ep: endpoint {
+						remote-endpoint = <&admaif15_ep>;
+					};
+				};
+
+				port@10 {
+					reg = <0x10>;
+
+					xbar_admaif16_ep: endpoint {
+						remote-endpoint = <&admaif16_ep>;
+					};
+				};
+
+				port@11 {
+					reg = <0x11>;
+
+					xbar_admaif17_ep: endpoint {
+						remote-endpoint = <&admaif17_ep>;
+					};
+				};
+
+				port@12 {
+					reg = <0x12>;
+
+					xbar_admaif18_ep: endpoint {
+						remote-endpoint = <&admaif18_ep>;
+					};
+				};
+
+				port@13 {
+					reg = <0x13>;
+
+					xbar_admaif19_ep: endpoint {
+						remote-endpoint = <&admaif19_ep>;
+					};
+				};
+
+				xbar_i2s1_port: port@14 {
+					reg = <0x14>;
+
+					xbar_i2s1_ep: endpoint {
+						remote-endpoint = <&i2s1_cif_ep>;
+					};
+				};
+
+				xbar_i2s3_port: port@16 {
+					reg = <0x16>;
+
+					xbar_i2s3_ep: endpoint {
+						remote-endpoint = <&i2s3_cif_ep>;
+					};
+				};
+
+				xbar_dmic1_port: port@1a {
+					reg = <0x1a>;
+
+					xbar_dmic1_ep: endpoint {
+						remote-endpoint = <&dmic1_cif_ep>;
+					};
+				};
+
+				xbar_dmic2_port: port@1b {
+					reg = <0x1b>;
+
+					xbar_dmic2_ep: endpoint {
+						remote-endpoint = <&dmic2_cif_ep>;
+					};
+				};
+			};
+		};
+
+		dma-controller@2930000 {
+			status = "okay";
+		};
+
+		interrupt-controller@2a40000 {
+			status = "okay";
+		};
+	};
+
 	memory-controller@2c00000 {
 		status = "okay";
 	};
@@ -65,6 +549,8 @@
 	};
 
 	serial@3100000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -228,6 +714,12 @@
 		phy-names = "usb2-0";
 	};
 
+	cec@3960000 {
+		status = "okay";
+
+		hdmi-phandle = <&sor1>;
+	};
+
 	hsp@3c00000 {
 		status = "okay";
 	};
@@ -349,73 +841,6 @@
 		status = "okay";
 	};
 
-	fan: pwm-fan {
-		compatible = "pwm-fan";
-		pwms = <&pwm4 0 45334>;
-
-		cooling-levels = <0 64 128 255>;
-		#cooling-cells = <2>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-power {
-			label = "Power";
-			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0)
-					   GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1)
-					   GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <10>;
-		};
-
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2)
-					   GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <10>;
-		};
-	};
-
-	cpus {
-		cpu@0 {
-			enable-method = "psci";
-		};
-
-		cpu@1 {
-			enable-method = "psci";
-		};
-
-		cpu@2 {
-			enable-method = "psci";
-		};
-
-		cpu@3 {
-			enable-method = "psci";
-		};
-
-		cpu@4 {
-			enable-method = "psci";
-		};
-
-		cpu@5 {
-			enable-method = "psci";
-		};
-	};
-
 	bpmp {
 		i2c {
 			status = "okay";
@@ -435,6 +860,23 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&max77620_default>;
 
+				fps {
+					fps0 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps1 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps2 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+				};
+
 				max77620_default: pinmux {
 					gpio0 {
 						pins = "gpio0";
@@ -484,23 +926,6 @@
 					};
 				};
 
-				fps {
-					fps0 {
-						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
-						maxim,shutdown-fps-time-period-us = <640>;
-					};
-
-					fps1 {
-						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
-						maxim,shutdown-fps-time-period-us = <640>;
-					};
-
-					fps2 {
-						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
-						maxim,shutdown-fps-time-period-us = <640>;
-					};
-				};
-
 				regulators {
 					in-sd0-supply = <&vdd_5v0_sys>;
 					in-sd1-supply = <&vdd_5v0_sys>;
@@ -587,12 +1012,79 @@
 		};
 	};
 
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+
+		cpu@4 {
+			enable-method = "psci";
+		};
+
+		cpu@5 {
+			enable-method = "psci";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		status = "okay";
 		method = "smc";
 	};
 
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm4 0 45334>;
+
+		cooling-levels = <0 64 128 255>;
+		#cooling-cells = <2>;
+	};
+
 	gnd: regulator-gnd {
 		compatible = "regulator-fixed";
 		regulator-name = "GND";
@@ -632,6 +1124,26 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
+	sound {
+		compatible = "nvidia,tegra186-audio-graph-card";
+		status = "okay";
+
+		dais = /* FE */
+		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+		       /* Router */
+		       <&xbar_i2s1_port>, <&xbar_i2s3_port>,
+		       <&xbar_dmic1_port>, <&xbar_dmic2_port>,
+		       /* I/O */
+		       <&i2s1_port>, <&i2s3_port>,
+		       <&dmic1_port>, <&dmic2_port>;
+
+		label = "NVIDIA Jetson TX2 NX APE";
+	};
+
 	thermal-zones {
 		cpu-thermal {
 			polling-delay = <0>;
@@ -715,508 +1227,4 @@
 			};
 		};
 	};
-
-	aconnect@2900000 {
-		status = "okay";
-
-		dma-controller@2930000 {
-			status = "okay";
-		};
-
-		interrupt-controller@2a40000 {
-			status = "okay";
-		};
-
-		ahub@2900800 {
-			status = "okay";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0x0>;
-
-					xbar_admaif0_ep: endpoint {
-						remote-endpoint = <&admaif0_ep>;
-					};
-				};
-
-				port@1 {
-					reg = <0x1>;
-
-					xbar_admaif1_ep: endpoint {
-						remote-endpoint = <&admaif1_ep>;
-					};
-				};
-
-				port@2 {
-					reg = <0x2>;
-
-					xbar_admaif2_ep: endpoint {
-						remote-endpoint = <&admaif2_ep>;
-					};
-				};
-
-				port@3 {
-					reg = <0x3>;
-
-					xbar_admaif3_ep: endpoint {
-						remote-endpoint = <&admaif3_ep>;
-					};
-				};
-
-				port@4 {
-					reg = <0x4>;
-
-					xbar_admaif4_ep: endpoint {
-						remote-endpoint = <&admaif4_ep>;
-					};
-				};
-
-				port@5 {
-					reg = <0x5>;
-
-					xbar_admaif5_ep: endpoint {
-						remote-endpoint = <&admaif5_ep>;
-					};
-				};
-
-				port@6 {
-					reg = <0x6>;
-
-					xbar_admaif6_ep: endpoint {
-						remote-endpoint = <&admaif6_ep>;
-					};
-				};
-
-				port@7 {
-					reg = <0x7>;
-
-					xbar_admaif7_ep: endpoint {
-						remote-endpoint = <&admaif7_ep>;
-					};
-				};
-
-				port@8 {
-					reg = <0x8>;
-
-					xbar_admaif8_ep: endpoint {
-						remote-endpoint = <&admaif8_ep>;
-					};
-				};
-
-				port@9 {
-					reg = <0x9>;
-
-					xbar_admaif9_ep: endpoint {
-						remote-endpoint = <&admaif9_ep>;
-					};
-				};
-
-				port@a {
-					reg = <0xa>;
-
-					xbar_admaif10_ep: endpoint {
-						remote-endpoint = <&admaif10_ep>;
-					};
-				};
-
-				port@b {
-					reg = <0xb>;
-
-					xbar_admaif11_ep: endpoint {
-						remote-endpoint = <&admaif11_ep>;
-					};
-				};
-
-				port@c {
-					reg = <0xc>;
-
-					xbar_admaif12_ep: endpoint {
-						remote-endpoint = <&admaif12_ep>;
-					};
-				};
-
-				port@d {
-					reg = <0xd>;
-
-					xbar_admaif13_ep: endpoint {
-						remote-endpoint = <&admaif13_ep>;
-					};
-				};
-
-				port@e {
-					reg = <0xe>;
-
-					xbar_admaif14_ep: endpoint {
-						remote-endpoint = <&admaif14_ep>;
-					};
-				};
-
-				port@f {
-					reg = <0xf>;
-
-					xbar_admaif15_ep: endpoint {
-						remote-endpoint = <&admaif15_ep>;
-					};
-				};
-
-				port@10 {
-					reg = <0x10>;
-
-					xbar_admaif16_ep: endpoint {
-						remote-endpoint = <&admaif16_ep>;
-					};
-				};
-
-				port@11 {
-					reg = <0x11>;
-
-					xbar_admaif17_ep: endpoint {
-						remote-endpoint = <&admaif17_ep>;
-					};
-				};
-
-				port@12 {
-					reg = <0x12>;
-
-					xbar_admaif18_ep: endpoint {
-						remote-endpoint = <&admaif18_ep>;
-					};
-				};
-
-				port@13 {
-					reg = <0x13>;
-
-					xbar_admaif19_ep: endpoint {
-						remote-endpoint = <&admaif19_ep>;
-					};
-				};
-
-				xbar_i2s1_port: port@14 {
-					reg = <0x14>;
-
-					xbar_i2s1_ep: endpoint {
-						remote-endpoint = <&i2s1_cif_ep>;
-					};
-				};
-
-				xbar_i2s3_port: port@16 {
-					reg = <0x16>;
-
-					xbar_i2s3_ep: endpoint {
-						remote-endpoint = <&i2s3_cif_ep>;
-					};
-				};
-
-				xbar_dmic1_port: port@1a {
-					reg = <0x1a>;
-
-					xbar_dmic1_ep: endpoint {
-						remote-endpoint = <&dmic1_cif_ep>;
-					};
-				};
-
-				xbar_dmic2_port: port@1b {
-					reg = <0x1b>;
-
-					xbar_dmic2_ep: endpoint {
-						remote-endpoint = <&dmic2_cif_ep>;
-					};
-				};
-			};
-
-			admaif@290f000 {
-				status = "okay";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					admaif0_port: port@0 {
-						reg = <0x0>;
-
-						admaif0_ep: endpoint {
-							remote-endpoint = <&xbar_admaif0_ep>;
-						};
-					};
-
-					admaif1_port: port@1 {
-						reg = <0x1>;
-
-						admaif1_ep: endpoint {
-							remote-endpoint = <&xbar_admaif1_ep>;
-						};
-					};
-
-					admaif2_port: port@2 {
-						reg = <0x2>;
-
-						admaif2_ep: endpoint {
-							remote-endpoint = <&xbar_admaif2_ep>;
-						};
-					};
-
-					admaif3_port: port@3 {
-						reg = <0x3>;
-
-						admaif3_ep: endpoint {
-							remote-endpoint = <&xbar_admaif3_ep>;
-						};
-					};
-
-					admaif4_port: port@4 {
-						reg = <0x4>;
-
-						admaif4_ep: endpoint {
-							remote-endpoint = <&xbar_admaif4_ep>;
-						};
-					};
-
-					admaif5_port: port@5 {
-						reg = <0x5>;
-
-						admaif5_ep: endpoint {
-							remote-endpoint = <&xbar_admaif5_ep>;
-						};
-					};
-
-					admaif6_port: port@6 {
-						reg = <0x6>;
-
-						admaif6_ep: endpoint {
-							remote-endpoint = <&xbar_admaif6_ep>;
-						};
-					};
-
-					admaif7_port: port@7 {
-						reg = <0x7>;
-
-						admaif7_ep: endpoint {
-							remote-endpoint = <&xbar_admaif7_ep>;
-						};
-					};
-
-					admaif8_port: port@8 {
-						reg = <0x8>;
-
-						admaif8_ep: endpoint {
-							remote-endpoint = <&xbar_admaif8_ep>;
-						};
-					};
-
-					admaif9_port: port@9 {
-						reg = <0x9>;
-
-						admaif9_ep: endpoint {
-							remote-endpoint = <&xbar_admaif9_ep>;
-						};
-					};
-
-					admaif10_port: port@a {
-						reg = <0xa>;
-
-						admaif10_ep: endpoint {
-							remote-endpoint = <&xbar_admaif10_ep>;
-						};
-					};
-
-					admaif11_port: port@b {
-						reg = <0xb>;
-
-						admaif11_ep: endpoint {
-							remote-endpoint = <&xbar_admaif11_ep>;
-						};
-					};
-
-					admaif12_port: port@c {
-						reg = <0xc>;
-
-						admaif12_ep: endpoint {
-							remote-endpoint = <&xbar_admaif12_ep>;
-						};
-					};
-
-					admaif13_port: port@d {
-						reg = <0xd>;
-
-						admaif13_ep: endpoint {
-							remote-endpoint = <&xbar_admaif13_ep>;
-						};
-					};
-
-					admaif14_port: port@e {
-						reg = <0xe>;
-
-						admaif14_ep: endpoint {
-							remote-endpoint = <&xbar_admaif14_ep>;
-						};
-					};
-
-					admaif15_port: port@f {
-						reg = <0xf>;
-
-						admaif15_ep: endpoint {
-							remote-endpoint = <&xbar_admaif15_ep>;
-						};
-					};
-
-					admaif16_port: port@10 {
-						reg = <0x10>;
-
-						admaif16_ep: endpoint {
-							remote-endpoint = <&xbar_admaif16_ep>;
-						};
-					};
-
-					admaif17_port: port@11 {
-						reg = <0x11>;
-
-						admaif17_ep: endpoint {
-							remote-endpoint = <&xbar_admaif17_ep>;
-						};
-					};
-
-					admaif18_port: port@12 {
-						reg = <0x12>;
-
-						admaif18_ep: endpoint {
-							remote-endpoint = <&xbar_admaif18_ep>;
-						};
-					};
-
-					admaif19_port: port@13 {
-						reg = <0x13>;
-
-						admaif19_ep: endpoint {
-							remote-endpoint = <&xbar_admaif19_ep>;
-						};
-					};
-				};
-			};
-
-			i2s@2901000 {
-				status = "okay";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-
-						i2s1_cif_ep: endpoint {
-							remote-endpoint = <&xbar_i2s1_ep>;
-						};
-					};
-
-					i2s1_port: port@1 {
-						reg = <1>;
-
-						i2s1_dap_ep: endpoint {
-							dai-format = "i2s";
-							/* Placeholder for external Codec */
-						};
-					};
-				};
-			};
-
-			i2s@2901200 {
-				status = "okay";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-
-						i2s3_cif_ep: endpoint {
-							remote-endpoint = <&xbar_i2s3_ep>;
-						};
-					};
-
-					i2s3_port: port@1 {
-						reg = <1>;
-
-						i2s3_dap_ep: endpoint {
-							dai-format = "i2s";
-							/* Placeholder for external Codec */
-						};
-					};
-				};
-			};
-
-			dmic@2904000 {
-				status = "okay";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-
-						dmic1_cif_ep: endpoint {
-							remote-endpoint = <&xbar_dmic1_ep>;
-						};
-					};
-
-					dmic1_port: port@1 {
-						reg = <1>;
-
-						dmic1_dap_ep: endpoint {
-							/* Place holder for external Codec */
-						};
-					};
-				};
-			};
-
-			dmic@2904100 {
-				status = "okay";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-
-						dmic2_cif_ep: endpoint {
-							remote-endpoint = <&xbar_dmic2_ep>;
-						};
-					};
-
-					dmic2_port: port@1 {
-						reg = <1>;
-
-						dmic2_dap_ep: endpoint {
-							/* Place holder for external Codec */
-						};
-					};
-				};
-			};
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra186-audio-graph-card";
-		status = "okay";
-
-		dais = /* FE */
-		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
-		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
-		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
-		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
-		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
-		       /* Router */
-		       <&xbar_i2s1_port>, <&xbar_i2s3_port>,
-		       <&xbar_dmic1_port>, <&xbar_dmic2_port>,
-		       /* I/O */
-		       <&i2s1_port>, <&i2s3_port>,
-		       <&dmic1_port>, <&dmic2_port>;
-
-		label = "NVIDIA Jetson TX2 NX APE";
-	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 59a10fb184f8..5778c93af3e6 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -78,7 +78,8 @@
 		reg = <0x0 0x2600000 0x0 0x210000>;
 		resets = <&bpmp TEGRA186_RESET_GPCDMA>;
 		reset-names = "gpcdma";
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
@@ -112,6 +113,7 @@
 		#dma-cells = <1>;
 		iommus = <&smmu TEGRA186_SID_GPCDMA_0>;
 		dma-coherent;
+		dma-channel-mask = <0xfffffffe>;
 		status = "okay";
 	};
 
@@ -122,129 +124,28 @@
 			 <&bpmp TEGRA186_CLK_APB2APE>;
 		clock-names = "ape", "apb2ape";
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_AUD>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x02900000 0x0 0x02900000 0x200000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x02900000 0x0 0x02900000 0x0 0x200000>;
 		status = "disabled";
 
-		adma: dma-controller@2930000 {
-			compatible = "nvidia,tegra186-adma";
-			reg = <0x02930000 0x20000>;
-			interrupt-parent = <&agic>;
-			interrupts =  <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			clocks = <&bpmp TEGRA186_CLK_AHUB>;
-			clock-names = "d_audio";
-			status = "disabled";
-		};
-
-		agic: interrupt-controller@2a40000 {
-			compatible = "nvidia,tegra186-agic",
-				     "nvidia,tegra210-agic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x02a41000 0x1000>,
-			      <0x02a42000 0x2000>;
-			interrupts = <GIC_SPI 145
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&bpmp TEGRA186_CLK_APE>;
-			clock-names = "clk";
-			status = "disabled";
-		};
-
 		tegra_ahub: ahub@2900800 {
 			compatible = "nvidia,tegra186-ahub";
-			reg = <0x02900800 0x800>;
+			reg = <0x0 0x02900800 0x0 0x800>;
 			clocks = <&bpmp TEGRA186_CLK_AHUB>;
 			clock-names = "ahub";
 			assigned-clocks = <&bpmp TEGRA186_CLK_AHUB>;
-			assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x02900800 0x02900800 0x11800>;
+			assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>;
+			assigned-clock-rates = <81600000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x02900800 0x0 0x02900800 0x0 0x11800>;
 			status = "disabled";
 
-			tegra_admaif: admaif@290f000 {
-				compatible = "nvidia,tegra186-admaif";
-				reg = <0x0290f000 0x1000>;
-				dmas = <&adma 1>, <&adma 1>,
-				       <&adma 2>, <&adma 2>,
-				       <&adma 3>, <&adma 3>,
-				       <&adma 4>, <&adma 4>,
-				       <&adma 5>, <&adma 5>,
-				       <&adma 6>, <&adma 6>,
-				       <&adma 7>, <&adma 7>,
-				       <&adma 8>, <&adma 8>,
-				       <&adma 9>, <&adma 9>,
-				       <&adma 10>, <&adma 10>,
-				       <&adma 11>, <&adma 11>,
-				       <&adma 12>, <&adma 12>,
-				       <&adma 13>, <&adma 13>,
-				       <&adma 14>, <&adma 14>,
-				       <&adma 15>, <&adma 15>,
-				       <&adma 16>, <&adma 16>,
-				       <&adma 17>, <&adma 17>,
-				       <&adma 18>, <&adma 18>,
-				       <&adma 19>, <&adma 19>,
-				       <&adma 20>, <&adma 20>;
-				dma-names = "rx1", "tx1",
-					    "rx2", "tx2",
-					    "rx3", "tx3",
-					    "rx4", "tx4",
-					    "rx5", "tx5",
-					    "rx6", "tx6",
-					    "rx7", "tx7",
-					    "rx8", "tx8",
-					    "rx9", "tx9",
-					    "rx10", "tx10",
-					    "rx11", "tx11",
-					    "rx12", "tx12",
-					    "rx13", "tx13",
-					    "rx14", "tx14",
-					    "rx15", "tx15",
-					    "rx16", "tx16",
-					    "rx17", "tx17",
-					    "rx18", "tx18",
-					    "rx19", "tx19",
-					    "rx20", "tx20";
-				status = "disabled";
-			};
-
 			tegra_i2s1: i2s@2901000 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901000 0x100>;
+				reg = <0x0 0x2901000 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S1>,
 					 <&bpmp TEGRA186_CLK_I2S1_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -258,7 +159,7 @@
 			tegra_i2s2: i2s@2901100 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901100 0x100>;
+				reg = <0x0 0x2901100 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S2>,
 					 <&bpmp TEGRA186_CLK_I2S2_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -272,7 +173,7 @@
 			tegra_i2s3: i2s@2901200 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901200 0x100>;
+				reg = <0x0 0x2901200 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S3>,
 					 <&bpmp TEGRA186_CLK_I2S3_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -286,7 +187,7 @@
 			tegra_i2s4: i2s@2901300 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901300 0x100>;
+				reg = <0x0 0x2901300 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S4>,
 					 <&bpmp TEGRA186_CLK_I2S4_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -300,7 +201,7 @@
 			tegra_i2s5: i2s@2901400 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901400 0x100>;
+				reg = <0x0 0x2901400 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S5>,
 					 <&bpmp TEGRA186_CLK_I2S5_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -314,7 +215,7 @@
 			tegra_i2s6: i2s@2901500 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901500 0x100>;
+				reg = <0x0 0x2901500 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S6>,
 					 <&bpmp TEGRA186_CLK_I2S6_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -325,82 +226,10 @@
 				status = "disabled";
 			};
 
-			tegra_dmic1: dmic@2904000 {
-				compatible = "nvidia,tegra210-dmic";
-				reg = <0x2904000 0x100>;
-				clocks = <&bpmp TEGRA186_CLK_DMIC1>;
-				clock-names = "dmic";
-				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC1>;
-				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
-				assigned-clock-rates = <3072000>;
-				sound-name-prefix = "DMIC1";
-				status = "disabled";
-			};
-
-			tegra_dmic2: dmic@2904100 {
-				compatible = "nvidia,tegra210-dmic";
-				reg = <0x2904100 0x100>;
-				clocks = <&bpmp TEGRA186_CLK_DMIC2>;
-				clock-names = "dmic";
-				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC2>;
-				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
-				assigned-clock-rates = <3072000>;
-				sound-name-prefix = "DMIC2";
-				status = "disabled";
-			};
-
-			tegra_dmic3: dmic@2904200 {
-				compatible = "nvidia,tegra210-dmic";
-				reg = <0x2904200 0x100>;
-				clocks = <&bpmp TEGRA186_CLK_DMIC3>;
-				clock-names = "dmic";
-				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC3>;
-				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
-				assigned-clock-rates = <3072000>;
-				sound-name-prefix = "DMIC3";
-				status = "disabled";
-			};
-
-			tegra_dmic4: dmic@2904300 {
-				compatible = "nvidia,tegra210-dmic";
-				reg = <0x2904300 0x100>;
-				clocks = <&bpmp TEGRA186_CLK_DMIC4>;
-				clock-names = "dmic";
-				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC4>;
-				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
-				assigned-clock-rates = <3072000>;
-				sound-name-prefix = "DMIC4";
-				status = "disabled";
-			};
-
-			tegra_dspk1: dspk@2905000 {
-				compatible = "nvidia,tegra186-dspk";
-				reg = <0x2905000 0x100>;
-				clocks = <&bpmp TEGRA186_CLK_DSPK1>;
-				clock-names = "dspk";
-				assigned-clocks = <&bpmp TEGRA186_CLK_DSPK1>;
-				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
-				assigned-clock-rates = <12288000>;
-				sound-name-prefix = "DSPK1";
-				status = "disabled";
-			};
-
-			tegra_dspk2: dspk@2905100 {
-				compatible = "nvidia,tegra186-dspk";
-				reg = <0x2905100 0x100>;
-				clocks = <&bpmp TEGRA186_CLK_DSPK2>;
-				clock-names = "dspk";
-				assigned-clocks = <&bpmp TEGRA186_CLK_DSPK2>;
-				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
-				assigned-clock-rates = <12288000>;
-				sound-name-prefix = "DSPK2";
-				status = "disabled";
-			};
-
 			tegra_sfc1: sfc@2902000 {
 				compatible = "nvidia,tegra186-sfc",
 					     "nvidia,tegra210-sfc";
-				reg = <0x2902000 0x200>;
+				reg = <0x0 0x2902000 0x0 0x200>;
 				sound-name-prefix = "SFC1";
 				status = "disabled";
 			};
@@ -408,7 +237,7 @@
 			tegra_sfc2: sfc@2902200 {
 				compatible = "nvidia,tegra186-sfc",
 					     "nvidia,tegra210-sfc";
-				reg = <0x2902200 0x200>;
+				reg = <0x0 0x2902200 0x0 0x200>;
 				sound-name-prefix = "SFC2";
 				status = "disabled";
 			};
@@ -416,7 +245,7 @@
 			tegra_sfc3: sfc@2902400 {
 				compatible = "nvidia,tegra186-sfc",
 					     "nvidia,tegra210-sfc";
-				reg = <0x2902400 0x200>;
+				reg = <0x0 0x2902400 0x0 0x200>;
 				sound-name-prefix = "SFC3";
 				status = "disabled";
 			};
@@ -424,31 +253,15 @@
 			tegra_sfc4: sfc@2902600 {
 				compatible = "nvidia,tegra186-sfc",
 					     "nvidia,tegra210-sfc";
-				reg = <0x2902600 0x200>;
+				reg = <0x0 0x2902600 0x0 0x200>;
 				sound-name-prefix = "SFC4";
 				status = "disabled";
 			};
 
-			tegra_mvc1: mvc@290a000 {
-				compatible = "nvidia,tegra186-mvc",
-					     "nvidia,tegra210-mvc";
-				reg = <0x290a000 0x200>;
-				sound-name-prefix = "MVC1";
-				status = "disabled";
-			};
-
-			tegra_mvc2: mvc@290a200 {
-				compatible = "nvidia,tegra186-mvc",
-					     "nvidia,tegra210-mvc";
-				reg = <0x290a200 0x200>;
-				sound-name-prefix = "MVC2";
-				status = "disabled";
-			};
-
 			tegra_amx1: amx@2903000 {
 				compatible = "nvidia,tegra186-amx",
 					     "nvidia,tegra210-amx";
-				reg = <0x2903000 0x100>;
+				reg = <0x0 0x2903000 0x0 0x100>;
 				sound-name-prefix = "AMX1";
 				status = "disabled";
 			};
@@ -456,7 +269,7 @@
 			tegra_amx2: amx@2903100 {
 				compatible = "nvidia,tegra186-amx",
 					     "nvidia,tegra210-amx";
-				reg = <0x2903100 0x100>;
+				reg = <0x0 0x2903100 0x0 0x100>;
 				sound-name-prefix = "AMX2";
 				status = "disabled";
 			};
@@ -464,7 +277,7 @@
 			tegra_amx3: amx@2903200 {
 				compatible = "nvidia,tegra186-amx",
 					     "nvidia,tegra210-amx";
-				reg = <0x2903200 0x100>;
+				reg = <0x0 0x2903200 0x0 0x100>;
 				sound-name-prefix = "AMX3";
 				status = "disabled";
 			};
@@ -472,7 +285,7 @@
 			tegra_amx4: amx@2903300 {
 				compatible = "nvidia,tegra186-amx",
 					     "nvidia,tegra210-amx";
-				reg = <0x2903300 0x100>;
+				reg = <0x0 0x2903300 0x0 0x100>;
 				sound-name-prefix = "AMX4";
 				status = "disabled";
 			};
@@ -480,7 +293,7 @@
 			tegra_adx1: adx@2903800 {
 				compatible = "nvidia,tegra186-adx",
 					     "nvidia,tegra210-adx";
-				reg = <0x2903800 0x100>;
+				reg = <0x0 0x2903800 0x0 0x100>;
 				sound-name-prefix = "ADX1";
 				status = "disabled";
 			};
@@ -488,7 +301,7 @@
 			tegra_adx2: adx@2903900 {
 				compatible = "nvidia,tegra186-adx",
 					     "nvidia,tegra210-adx";
-				reg = <0x2903900 0x100>;
+				reg = <0x0 0x2903900 0x0 0x100>;
 				sound-name-prefix = "ADX2";
 				status = "disabled";
 			};
@@ -496,7 +309,7 @@
 			tegra_adx3: adx@2903a00 {
 				compatible = "nvidia,tegra186-adx",
 					     "nvidia,tegra210-adx";
-				reg = <0x2903a00 0x100>;
+				reg = <0x0 0x2903a00 0x0 0x100>;
 				sound-name-prefix = "ADX3";
 				status = "disabled";
 			};
@@ -504,17 +317,89 @@
 			tegra_adx4: adx@2903b00 {
 				compatible = "nvidia,tegra186-adx",
 					     "nvidia,tegra210-adx";
-				reg = <0x2903b00 0x100>;
+				reg = <0x0 0x2903b00 0x0 0x100>;
 				sound-name-prefix = "ADX4";
 				status = "disabled";
 			};
 
+			tegra_dmic1: dmic@2904000 {
+				compatible = "nvidia,tegra210-dmic";
+				reg = <0x0 0x2904000 0x0 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_DMIC1>;
+				clock-names = "dmic";
+				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC1>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <3072000>;
+				sound-name-prefix = "DMIC1";
+				status = "disabled";
+			};
+
+			tegra_dmic2: dmic@2904100 {
+				compatible = "nvidia,tegra210-dmic";
+				reg = <0x0 0x2904100 0x0 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_DMIC2>;
+				clock-names = "dmic";
+				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC2>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <3072000>;
+				sound-name-prefix = "DMIC2";
+				status = "disabled";
+			};
+
+			tegra_dmic3: dmic@2904200 {
+				compatible = "nvidia,tegra210-dmic";
+				reg = <0x0 0x2904200 0x0 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_DMIC3>;
+				clock-names = "dmic";
+				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC3>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <3072000>;
+				sound-name-prefix = "DMIC3";
+				status = "disabled";
+			};
+
+			tegra_dmic4: dmic@2904300 {
+				compatible = "nvidia,tegra210-dmic";
+				reg = <0x0 0x2904300 0x0 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_DMIC4>;
+				clock-names = "dmic";
+				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC4>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <3072000>;
+				sound-name-prefix = "DMIC4";
+				status = "disabled";
+			};
+
+			tegra_dspk1: dspk@2905000 {
+				compatible = "nvidia,tegra186-dspk";
+				reg = <0x0 0x2905000 0x0 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_DSPK1>;
+				clock-names = "dspk";
+				assigned-clocks = <&bpmp TEGRA186_CLK_DSPK1>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <12288000>;
+				sound-name-prefix = "DSPK1";
+				status = "disabled";
+			};
+
+			tegra_dspk2: dspk@2905100 {
+				compatible = "nvidia,tegra186-dspk";
+				reg = <0x0 0x2905100 0x0 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_DSPK2>;
+				clock-names = "dspk";
+				assigned-clocks = <&bpmp TEGRA186_CLK_DSPK2>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <12288000>;
+				sound-name-prefix = "DSPK2";
+				status = "disabled";
+			};
+
 			tegra_ope1: processing-engine@2908000 {
 				compatible = "nvidia,tegra186-ope",
 					     "nvidia,tegra210-ope";
-				reg = <0x2908000 0x100>;
-				#address-cells = <1>;
-				#size-cells = <1>;
+				reg = <0x0 0x2908000 0x0 0x100>;
+				#address-cells = <2>;
+				#size-cells = <2>;
 				ranges;
 				sound-name-prefix = "OPE1";
 				status = "disabled";
@@ -522,31 +407,149 @@
 				equalizer@2908100 {
 					compatible = "nvidia,tegra186-peq",
 						     "nvidia,tegra210-peq";
-					reg = <0x2908100 0x100>;
+					reg = <0x0 0x2908100 0x0 0x100>;
 				};
 
 				dynamic-range-compressor@2908200 {
 					compatible = "nvidia,tegra186-mbdrc",
 						     "nvidia,tegra210-mbdrc";
-					reg = <0x2908200 0x200>;
+					reg = <0x0 0x2908200 0x0 0x200>;
 				};
 			};
 
+			tegra_mvc1: mvc@290a000 {
+				compatible = "nvidia,tegra186-mvc",
+					     "nvidia,tegra210-mvc";
+				reg = <0x0 0x290a000 0x0 0x200>;
+				sound-name-prefix = "MVC1";
+				status = "disabled";
+			};
+
+			tegra_mvc2: mvc@290a200 {
+				compatible = "nvidia,tegra186-mvc",
+					     "nvidia,tegra210-mvc";
+				reg = <0x0 0x290a200 0x0 0x200>;
+				sound-name-prefix = "MVC2";
+				status = "disabled";
+			};
+
 			tegra_amixer: amixer@290bb00 {
 				compatible = "nvidia,tegra186-amixer",
 					     "nvidia,tegra210-amixer";
-				reg = <0x290bb00 0x800>;
+				reg = <0x0 0x290bb00 0x0 0x800>;
 				sound-name-prefix = "MIXER1";
 				status = "disabled";
 			};
 
+			tegra_admaif: admaif@290f000 {
+				compatible = "nvidia,tegra186-admaif";
+				reg = <0x0 0x0290f000 0x0 0x1000>;
+				dmas = <&adma 1>, <&adma 1>,
+				       <&adma 2>, <&adma 2>,
+				       <&adma 3>, <&adma 3>,
+				       <&adma 4>, <&adma 4>,
+				       <&adma 5>, <&adma 5>,
+				       <&adma 6>, <&adma 6>,
+				       <&adma 7>, <&adma 7>,
+				       <&adma 8>, <&adma 8>,
+				       <&adma 9>, <&adma 9>,
+				       <&adma 10>, <&adma 10>,
+				       <&adma 11>, <&adma 11>,
+				       <&adma 12>, <&adma 12>,
+				       <&adma 13>, <&adma 13>,
+				       <&adma 14>, <&adma 14>,
+				       <&adma 15>, <&adma 15>,
+				       <&adma 16>, <&adma 16>,
+				       <&adma 17>, <&adma 17>,
+				       <&adma 18>, <&adma 18>,
+				       <&adma 19>, <&adma 19>,
+				       <&adma 20>, <&adma 20>;
+				dma-names = "rx1", "tx1",
+					    "rx2", "tx2",
+					    "rx3", "tx3",
+					    "rx4", "tx4",
+					    "rx5", "tx5",
+					    "rx6", "tx6",
+					    "rx7", "tx7",
+					    "rx8", "tx8",
+					    "rx9", "tx9",
+					    "rx10", "tx10",
+					    "rx11", "tx11",
+					    "rx12", "tx12",
+					    "rx13", "tx13",
+					    "rx14", "tx14",
+					    "rx15", "tx15",
+					    "rx16", "tx16",
+					    "rx17", "tx17",
+					    "rx18", "tx18",
+					    "rx19", "tx19",
+					    "rx20", "tx20";
+				status = "disabled";
+			};
+
 			tegra_asrc: asrc@2910000 {
 				compatible = "nvidia,tegra186-asrc";
-				reg = <0x2910000 0x2000>;
+				reg = <0x0 0x2910000 0x0 0x2000>;
 				sound-name-prefix = "ASRC1";
 				status = "disabled";
 			};
 		};
+
+		adma: dma-controller@2930000 {
+			compatible = "nvidia,tegra186-adma";
+			reg = <0x0 0x02930000 0x0 0x20000>;
+			interrupt-parent = <&agic>;
+			interrupts =  <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&bpmp TEGRA186_CLK_AHUB>;
+			clock-names = "d_audio";
+			status = "disabled";
+		};
+
+		agic: interrupt-controller@2a40000 {
+			compatible = "nvidia,tegra186-agic",
+				     "nvidia,tegra210-agic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x02a41000 0x0 0x1000>,
+			      <0x0 0x02a42000 0x0 0x2000>;
+			interrupts = <GIC_SPI 145
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&bpmp TEGRA186_CLK_APE>;
+			clock-names = "clk";
+			status = "disabled";
+		};
 	};
 
 	mc: memory-controller@2c00000 {
@@ -608,9 +611,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTA>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTA>;
-		reset-names = "serial";
+		dmas = <&gpcdma 8>, <&gpcdma 8>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -620,9 +623,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTB>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTB>;
-		reset-names = "serial";
+		dmas = <&gpcdma 9>, <&gpcdma 9>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -632,9 +635,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTD>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTD>;
-		reset-names = "serial";
+		dmas = <&gpcdma 19>, <&gpcdma 19>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -644,9 +647,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTE>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTE>;
-		reset-names = "serial";
+		dmas = <&gpcdma 20>, <&gpcdma 20>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -656,9 +659,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTF>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTF>;
-		reset-names = "serial";
+		dmas = <&gpcdma 12>, <&gpcdma 12>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -672,6 +675,8 @@
 		clock-names = "div-clk";
 		resets = <&bpmp TEGRA186_RESET_I2C1>;
 		reset-names = "i2c";
+		dmas = <&gpcdma 21>, <&gpcdma 21>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -685,6 +690,8 @@
 		clock-names = "div-clk";
 		resets = <&bpmp TEGRA186_RESET_I2C3>;
 		reset-names = "i2c";
+		dmas = <&gpcdma 23>, <&gpcdma 23>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -702,6 +709,8 @@
 		pinctrl-names = "default", "idle";
 		pinctrl-0 = <&state_dpaux1_i2c>;
 		pinctrl-1 = <&state_dpaux1_off>;
+		dmas = <&gpcdma 26>, <&gpcdma 26>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -733,6 +742,8 @@
 		pinctrl-names = "default", "idle";
 		pinctrl-0 = <&state_dpaux_i2c>;
 		pinctrl-1 = <&state_dpaux_off>;
+		dmas = <&gpcdma 30>, <&gpcdma 30>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -746,6 +757,8 @@
 		clock-names = "div-clk";
 		resets = <&bpmp TEGRA186_RESET_I2C7>;
 		reset-names = "i2c";
+		dmas = <&gpcdma 27>, <&gpcdma 27>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -759,6 +772,8 @@
 		clock-names = "div-clk";
 		resets = <&bpmp TEGRA186_RESET_I2C9>;
 		reset-names = "i2c";
+		dmas = <&gpcdma 31>, <&gpcdma 31>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -766,7 +781,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x3280000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM1>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM1>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -777,7 +791,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x3290000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM2>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM2>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -788,7 +801,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x32a0000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM3>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM3>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -799,7 +811,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x32c0000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM5>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM5>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -810,7 +821,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x32d0000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM6>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM6>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -821,7 +831,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x32e0000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM7>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM7>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -832,7 +841,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0x32f0000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM8>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM8>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -951,6 +959,34 @@
 		status = "disabled";
 	};
 
+	sata@3507000 {
+		compatible = "nvidia,tegra186-ahci";
+		reg = <0x0 0x03507000 0x0 0x00002000>, /* AHCI */
+		      <0x0 0x03500000 0x0 0x00007000>, /* SATA */
+		      <0x0 0x03A90000 0x0 0x00010000>; /* SATA AUX */
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_SAX>;
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SATAR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SATAW &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_SATA>;
+
+		clocks = <&bpmp TEGRA186_CLK_SATA>,
+			 <&bpmp TEGRA186_CLK_SATA_OOB>;
+		clock-names = "sata", "sata-oob";
+		assigned-clocks = <&bpmp TEGRA186_CLK_SATA>,
+				  <&bpmp TEGRA186_CLK_SATA_OOB>;
+		assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>,
+					 <&bpmp TEGRA186_CLK_PLLP>;
+		assigned-clock-rates = <102000000>,
+				       <204000000>;
+		resets = <&bpmp TEGRA186_RESET_SATA>,
+			<&bpmp TEGRA186_RESET_SATACOLD>;
+		reset-names = "sata", "sata-cold";
+		status = "disabled";
+	};
+
 	hda@3510000 {
 		compatible = "nvidia,tegra186-hda", "nvidia,tegra30-hda";
 		reg = <0x0 0x03510000 0x0 0x10000>;
@@ -1149,7 +1185,7 @@
 	};
 
 	cec@3960000 {
-		compatible = "nvidia,tegra186-cec";
+		compatible = "nvidia,tegra186-cec", "nvidia,tegra210-cec";
 		reg = <0x0 0x03960000 0x0 0x10000>;
 		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_CEC>;
@@ -1176,6 +1212,8 @@
 		clock-names = "div-clk";
 		resets = <&bpmp TEGRA186_RESET_I2C2>;
 		reset-names = "i2c";
+		dmas = <&gpcdma 22>, <&gpcdma 22>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -1189,6 +1227,8 @@
 		clock-names = "div-clk";
 		resets = <&bpmp TEGRA186_RESET_I2C8>;
 		reset-names = "i2c";
+		dmas = <&gpcdma 0>, <&gpcdma 0>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -1198,9 +1238,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTC>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTC>;
-		reset-names = "serial";
+		dmas = <&gpcdma 3>, <&gpcdma 3>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -1210,9 +1250,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTG>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTG>;
-		reset-names = "serial";
+		dmas = <&gpcdma 2>, <&gpcdma 2>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -1242,7 +1282,6 @@
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0xc340000 0x0 0x10000>;
 		clocks = <&bpmp TEGRA186_CLK_PWM4>;
-		clock-names = "pwm";
 		resets = <&bpmp TEGRA186_RESET_PWM4>;
 		reset-names = "pwm";
 		status = "disabled";
@@ -1260,18 +1299,13 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 
-		sdmmc1_3v3: sdmmc1-3v3 {
-			pins = "sdmmc1-hv";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
-		};
-
 		sdmmc1_1v8: sdmmc1-1v8 {
 			pins = "sdmmc1-hv";
 			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
 		};
 
-		sdmmc2_3v3: sdmmc2-3v3 {
-			pins = "sdmmc2-hv";
+		sdmmc1_3v3: sdmmc1-3v3 {
+			pins = "sdmmc1-hv";
 			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
 		};
 
@@ -1280,8 +1314,8 @@
 			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
 		};
 
-		sdmmc3_3v3: sdmmc3-3v3 {
-			pins = "sdmmc3-hv";
+		sdmmc2_3v3: sdmmc2-3v3 {
+			pins = "sdmmc2-hv";
 			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
 		};
 
@@ -1289,6 +1323,11 @@
 			pins = "sdmmc3-hv";
 			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
 		};
+
+		sdmmc3_3v3: sdmmc3-3v3 {
+			pins = "sdmmc3-hv";
+			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+		};
 	};
 
 	ccplex@e000000 {
@@ -1474,10 +1513,10 @@
 		resets = <&bpmp TEGRA186_RESET_HOST1X>;
 		reset-names = "host1x";
 
-		#address-cells = <1>;
-		#size-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 
-		ranges = <0x15000000 0x0 0x15000000 0x01000000>;
+		ranges = <0x0 0x15000000 0x0 0x15000000 0x0 0x01000000>;
 
 		interconnects = <&mc TEGRA186_MEMORY_CLIENT_HOST1XDMAR &emc>;
 		interconnect-names = "dma-mem";
@@ -1485,19 +1524,18 @@
 		iommus = <&smmu TEGRA186_SID_HOST1X>;
 
 		/* Context isolation domains */
-		iommu-map = <
-			0 &smmu TEGRA186_SID_HOST1X_CTX0 1
-			1 &smmu TEGRA186_SID_HOST1X_CTX1 1
-			2 &smmu TEGRA186_SID_HOST1X_CTX2 1
-			3 &smmu TEGRA186_SID_HOST1X_CTX3 1
-			4 &smmu TEGRA186_SID_HOST1X_CTX4 1
-			5 &smmu TEGRA186_SID_HOST1X_CTX5 1
-			6 &smmu TEGRA186_SID_HOST1X_CTX6 1
-			7 &smmu TEGRA186_SID_HOST1X_CTX7 1>;
+		iommu-map = <0 &smmu TEGRA186_SID_HOST1X_CTX0 1>,
+			    <1 &smmu TEGRA186_SID_HOST1X_CTX1 1>,
+			    <2 &smmu TEGRA186_SID_HOST1X_CTX2 1>,
+			    <3 &smmu TEGRA186_SID_HOST1X_CTX3 1>,
+			    <4 &smmu TEGRA186_SID_HOST1X_CTX4 1>,
+			    <5 &smmu TEGRA186_SID_HOST1X_CTX5 1>,
+			    <6 &smmu TEGRA186_SID_HOST1X_CTX6 1>,
+			    <7 &smmu TEGRA186_SID_HOST1X_CTX7 1>;
 
 		dpaux1: dpaux@15040000 {
 			compatible = "nvidia,tegra186-dpaux";
-			reg = <0x15040000 0x10000>;
+			reg = <0x0 0x15040000 0x0 0x10000>;
 			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DPAUX1>,
 				 <&bpmp TEGRA186_CLK_PLLDP>;
@@ -1531,7 +1569,7 @@
 
 		display-hub@15200000 {
 			compatible = "nvidia,tegra186-display";
-			reg = <0x15200000 0x00040000>;
+			reg = <0x0 0x15200000 0x0 0x00040000>;
 			resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>,
 				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>,
 				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP1>,
@@ -1549,14 +1587,14 @@
 
 			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
 
-			#address-cells = <1>;
-			#size-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
 
-			ranges = <0x15200000 0x15200000 0x40000>;
+			ranges = <0x0 0x15200000 0x0 0x15200000 0x0 0x40000>;
 
 			display@15200000 {
 				compatible = "nvidia,tegra186-dc";
-				reg = <0x15200000 0x10000>;
+				reg = <0x0 0x15200000 0x0 0x10000>;
 				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P0>;
 				clock-names = "dc";
@@ -1575,7 +1613,7 @@
 
 			display@15210000 {
 				compatible = "nvidia,tegra186-dc";
-				reg = <0x15210000 0x10000>;
+				reg = <0x0 0x15210000 0x0 0x10000>;
 				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P1>;
 				clock-names = "dc";
@@ -1594,7 +1632,7 @@
 
 			display@15220000 {
 				compatible = "nvidia,tegra186-dc";
-				reg = <0x15220000 0x10000>;
+				reg = <0x0 0x15220000 0x0 0x10000>;
 				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P2>;
 				clock-names = "dc";
@@ -1614,7 +1652,7 @@
 
 		dsia: dsi@15300000 {
 			compatible = "nvidia,tegra186-dsi";
-			reg = <0x15300000 0x10000>;
+			reg = <0x0 0x15300000 0x0 0x10000>;
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DSI>,
 				 <&bpmp TEGRA186_CLK_DSIA_LP>,
@@ -1629,7 +1667,7 @@
 
 		vic@15340000 {
 			compatible = "nvidia,tegra186-vic";
-			reg = <0x15340000 0x40000>;
+			reg = <0x0 0x15340000 0x0 0x40000>;
 			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_VIC>;
 			clock-names = "vic";
@@ -1645,7 +1683,7 @@
 
 		nvjpg@15380000 {
 			compatible = "nvidia,tegra186-nvjpg";
-			reg = <0x15380000 0x40000>;
+			reg = <0x0 0x15380000 0x0 0x40000>;
 			clocks = <&bpmp TEGRA186_CLK_NVJPG>;
 			clock-names = "nvjpg";
 			resets = <&bpmp TEGRA186_RESET_NVJPG>;
@@ -1660,7 +1698,7 @@
 
 		dsib: dsi@15400000 {
 			compatible = "nvidia,tegra186-dsi";
-			reg = <0x15400000 0x10000>;
+			reg = <0x0 0x15400000 0x0 0x10000>;
 			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DSIB>,
 				 <&bpmp TEGRA186_CLK_DSIB_LP>,
@@ -1675,7 +1713,7 @@
 
 		nvdec@15480000 {
 			compatible = "nvidia,tegra186-nvdec";
-			reg = <0x15480000 0x40000>;
+			reg = <0x0 0x15480000 0x0 0x40000>;
 			clocks = <&bpmp TEGRA186_CLK_NVDEC>;
 			clock-names = "nvdec";
 			resets = <&bpmp TEGRA186_RESET_NVDEC>;
@@ -1691,7 +1729,7 @@
 
 		nvenc@154c0000 {
 			compatible = "nvidia,tegra186-nvenc";
-			reg = <0x154c0000 0x40000>;
+			reg = <0x0 0x154c0000 0x0 0x40000>;
 			clocks = <&bpmp TEGRA186_CLK_NVENC>;
 			clock-names = "nvenc";
 			resets = <&bpmp TEGRA186_RESET_NVENC>;
@@ -1706,7 +1744,7 @@
 
 		sor0: sor@15540000 {
 			compatible = "nvidia,tegra186-sor";
-			reg = <0x15540000 0x10000>;
+			reg = <0x0 0x15540000 0x0 0x10000>;
 			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_SOR0>,
 				 <&bpmp TEGRA186_CLK_SOR0_OUT>,
@@ -1730,7 +1768,7 @@
 
 		sor1: sor@15580000 {
 			compatible = "nvidia,tegra186-sor";
-			reg = <0x15580000 0x10000>;
+			reg = <0x0 0x15580000 0x0 0x10000>;
 			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_SOR1>,
 				 <&bpmp TEGRA186_CLK_SOR1_OUT>,
@@ -1754,7 +1792,7 @@
 
 		dpaux: dpaux@155c0000 {
 			compatible = "nvidia,tegra186-dpaux";
-			reg = <0x155c0000 0x10000>;
+			reg = <0x0 0x155c0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DPAUX>,
 				 <&bpmp TEGRA186_CLK_PLLDP>;
@@ -1788,7 +1826,7 @@
 
 		padctl@15880000 {
 			compatible = "nvidia,tegra186-dsi-padctl";
-			reg = <0x15880000 0x10000>;
+			reg = <0x0 0x15880000 0x0 0x10000>;
 			resets = <&bpmp TEGRA186_RESET_DSI>;
 			reset-names = "dsi";
 			status = "disabled";
@@ -1796,7 +1834,7 @@
 
 		dsic: dsi@15900000 {
 			compatible = "nvidia,tegra186-dsi";
-			reg = <0x15900000 0x10000>;
+			reg = <0x0 0x15900000 0x0 0x10000>;
 			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DSIC>,
 				 <&bpmp TEGRA186_CLK_DSIC_LP>,
@@ -1811,7 +1849,7 @@
 
 		dsid: dsi@15940000 {
 			compatible = "nvidia,tegra186-dsi";
-			reg = <0x15940000 0x10000>;
+			reg = <0x0 0x15940000 0x0 0x10000>;
 			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DSID>,
 				 <&bpmp TEGRA186_CLK_DSID_LP>,
@@ -1869,34 +1907,6 @@
 		};
 	};
 
-	sata@3507000 {
-		compatible = "nvidia,tegra186-ahci";
-		reg = <0x0 0x03507000 0x0 0x00002000>, /* AHCI */
-		      <0x0 0x03500000 0x0 0x00007000>, /* SATA */
-		      <0x0 0x03A90000 0x0 0x00010000>; /* SATA AUX */
-		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
-
-		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_SAX>;
-		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SATAR &emc>,
-				<&mc TEGRA186_MEMORY_CLIENT_SATAW &emc>;
-		interconnect-names = "dma-mem", "write";
-		iommus = <&smmu TEGRA186_SID_SATA>;
-
-		clocks = <&bpmp TEGRA186_CLK_SATA>,
-			 <&bpmp TEGRA186_CLK_SATA_OOB>;
-		clock-names = "sata", "sata-oob";
-		assigned-clocks = <&bpmp TEGRA186_CLK_SATA>,
-				  <&bpmp TEGRA186_CLK_SATA_OOB>;
-		assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>,
-					 <&bpmp TEGRA186_CLK_PLLP>;
-		assigned-clock-rates = <102000000>,
-				       <204000000>;
-		resets = <&bpmp TEGRA186_RESET_SATA>,
-			<&bpmp TEGRA186_RESET_SATACOLD>;
-		reset-names = "sata", "sata-cold";
-		status = "disabled";
-	};
-
 	bpmp: bpmp {
 		compatible = "nvidia,tegra186-bpmp";
 		interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>,
@@ -2027,14 +2037,7 @@
 		};
 	};
 
-	pmu_denver {
-		compatible = "nvidia,denver-pmu";
-		interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&denver_0 &denver_1>;
-	};
-
-	pmu_a57 {
+	pmu-a57 {
 		compatible = "arm,cortex-a57-pmu";
 		interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
@@ -2043,6 +2046,13 @@
 		interrupt-affinity = <&ca57_0 &ca57_1 &ca57_2 &ca57_3>;
 	};
 
+	pmu-denver {
+		compatible = "nvidia,denver-pmu";
+		interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&denver_0 &denver_1>;
+	};
+
 	sound {
 		status = "disabled";
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index b0f9393dd39c..43942db6eac9 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -23,7 +23,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200n8";
+		bootargs = "console=ttyTCU0,115200n8";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -53,7 +53,59 @@
 			status = "okay";
 		};
 
+		i2c@c240000 {
+			status = "okay";
+
+			power-sensor@40 {
+				compatible = "ti,ina3221";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				input@0 {
+					reg = <0x0>;
+					label = "GPU";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+				input@1 {
+					reg = <0x1>;
+					label = "CPU";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+				input@2 {
+					reg = <0x2>;
+					label = "SOC";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina3221";
+				reg = <0x41>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				input@0 {
+					reg = <0x0>;
+					label = "CV";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+				input@1 {
+					reg = <0x1>;
+					label = "VDDRQ";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+				input@2 {
+					reg = <0x2>;
+					label = "SYS5V";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+			};
+		};
+
 		serial@3110000 {
+			/delete-property/ dmas;
+			/delete-property/ dma-names;
 			status = "okay";
 		};
 
@@ -147,6 +199,24 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&max20024_default>;
 
+				fps {
+					fps0 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps1 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+						maxim,shutdown-fps-time-period-us = <640>;
+						maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
+					};
+
+					fps2 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+				};
+
 				max20024_default: pinmux {
 					gpio0 {
 						pins = "gpio0";
@@ -190,24 +260,6 @@
 					};
 				};
 
-				fps {
-					fps0 {
-						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
-						maxim,shutdown-fps-time-period-us = <640>;
-					};
-
-					fps1 {
-						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
-						maxim,shutdown-fps-time-period-us = <640>;
-						maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
-					};
-
-					fps2 {
-						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
-						maxim,shutdown-fps-time-period-us = <640>;
-					};
-				};
-
 				regulators {
 					in-sd0-supply = <&vdd_5v0_sys>;
 					in-sd1-supply = <&vdd_5v0_sys>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index bc1041d11f6d..ea6f397a2792 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -14,16 +14,1115 @@
 		aconnect@2900000 {
 			status = "okay";
 
-			dma-controller@2930000 {
+			ahub@2900800 {
 				status = "okay";
-			};
 
-			interrupt-controller@2a40000 {
-				status = "okay";
-			};
+				i2s@2901000 {
+					status = "okay";
 
-			ahub@2900800 {
-				status = "okay";
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s1_cif_ep: endpoint {
+								remote-endpoint = <&xbar_i2s1_ep>;
+							};
+						};
+
+						i2s1_port: port@1 {
+							reg = <1>;
+
+							i2s1_dap_ep: endpoint {
+								dai-format = "i2s";
+								remote-endpoint = <&rt5658_ep>;
+							};
+						};
+					};
+				};
+
+				i2s@2901100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s2_cif_ep: endpoint {
+								remote-endpoint = <&xbar_i2s2_ep>;
+							};
+						};
+
+						i2s2_port: port@1 {
+							reg = <1>;
+
+							i2s2_dap_ep: endpoint {
+								dai-format = "i2s";
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				i2s@2901300 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s4_cif_ep: endpoint {
+								remote-endpoint = <&xbar_i2s4_ep>;
+							};
+						};
+
+						i2s4_port: port@1 {
+							reg = <1>;
+
+							i2s4_dap_ep: endpoint {
+								dai-format = "i2s";
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				i2s@2901500 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s6_cif_ep: endpoint {
+								remote-endpoint = <&xbar_i2s6_ep>;
+							};
+						};
+
+						i2s6_port: port@1 {
+							reg = <1>;
+
+							i2s6_dap_ep: endpoint {
+								dai-format = "i2s";
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				sfc@2902000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc1_in_ep>;
+							};
+						};
+
+						sfc1_out_port: port@1 {
+							reg = <1>;
+
+							sfc1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc1_out_ep>;
+							};
+						};
+					};
+				};
+
+				sfc@2902200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc2_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc2_in_ep>;
+							};
+						};
+
+						sfc2_out_port: port@1 {
+							reg = <1>;
+
+							sfc2_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc2_out_ep>;
+							};
+						};
+					};
+				};
+
+				sfc@2902400 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc3_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc3_in_ep>;
+							};
+						};
+
+						sfc3_out_port: port@1 {
+							reg = <1>;
+
+							sfc3_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc3_out_ep>;
+							};
+						};
+					};
+				};
+
+				sfc@2902600 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc4_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc4_in_ep>;
+							};
+						};
+
+						sfc4_out_port: port@1 {
+							reg = <1>;
+
+							sfc4_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc4_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx1_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx1_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx1_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx1_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in4_ep>;
+							};
+						};
+
+						amx1_out_port: port@4 {
+							reg = <4>;
+
+							amx1_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx2_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx2_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in2_ep>;
+							};
+						};
+
+						amx2_in3_port: port@2 {
+							reg = <2>;
+
+							amx2_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in3_ep>;
+							};
+						};
+
+						amx2_in4_port: port@3 {
+							reg = <3>;
+
+							amx2_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in4_ep>;
+							};
+						};
+
+						amx2_out_port: port@4 {
+							reg = <4>;
+
+							amx2_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx3_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx3_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx3_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx3_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in4_ep>;
+							};
+						};
+
+						amx3_out_port: port@4 {
+							reg = <4>;
+
+							amx3_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903300 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx4_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx4_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx4_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx4_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in4_ep>;
+							};
+						};
+
+						amx4_out_port: port@4 {
+							reg = <4>;
+
+							amx4_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_out_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903800 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx1_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_in_ep>;
+							};
+						};
+
+						adx1_out1_port: port@1 {
+							reg = <1>;
+
+							adx1_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out1_ep>;
+							};
+						};
+
+						adx1_out2_port: port@2 {
+							reg = <2>;
+
+							adx1_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out2_ep>;
+							};
+						};
+
+						adx1_out3_port: port@3 {
+							reg = <3>;
+
+							adx1_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out3_ep>;
+							};
+						};
+
+						adx1_out4_port: port@4 {
+							reg = <4>;
+
+							adx1_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out4_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903900 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx2_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_in_ep>;
+							};
+						};
+
+						adx2_out1_port: port@1 {
+							reg = <1>;
+
+							adx2_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out1_ep>;
+							};
+						};
+
+						adx2_out2_port: port@2 {
+							reg = <2>;
+
+							adx2_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out2_ep>;
+							};
+						};
+
+						adx2_out3_port: port@3 {
+							reg = <3>;
+
+							adx2_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out3_ep>;
+							};
+						};
+
+						adx2_out4_port: port@4 {
+							reg = <4>;
+
+							adx2_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out4_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903a00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx3_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_in_ep>;
+							};
+						};
+
+						adx3_out1_port: port@1 {
+							reg = <1>;
+
+							adx3_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out1_ep>;
+							};
+						};
+
+						adx3_out2_port: port@2 {
+							reg = <2>;
+
+							adx3_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out2_ep>;
+							};
+						};
+
+						adx3_out3_port: port@3 {
+							reg = <3>;
+
+							adx3_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out3_ep>;
+							};
+						};
+
+						adx3_out4_port: port@4 {
+							reg = <4>;
+
+							adx3_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out4_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903b00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx4_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_in_ep>;
+							};
+						};
+
+						adx4_out1_port: port@1 {
+							reg = <1>;
+
+							adx4_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out1_ep>;
+							};
+						};
+
+						adx4_out2_port: port@2 {
+							reg = <2>;
+
+							adx4_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out2_ep>;
+							};
+						};
+
+						adx4_out3_port: port@3 {
+							reg = <3>;
+
+							adx4_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out3_ep>;
+							};
+						};
+
+						adx4_out4_port: port@4 {
+							reg = <4>;
+
+							adx4_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out4_ep>;
+							};
+						};
+					};
+				};
+
+				dmic@2904200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic3_cif_ep: endpoint {
+								remote-endpoint = <&xbar_dmic3_ep>;
+							};
+						};
+
+						dmic3_port: port@1 {
+							reg = <1>;
+
+							dmic3_dap_ep: endpoint {
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				processing-engine@2908000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							ope1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_ope1_in_ep>;
+							};
+						};
+
+						ope1_out_port: port@1 {
+							reg = <0x1>;
+
+							ope1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_ope1_out_ep>;
+							};
+						};
+					};
+				};
+
+				mvc@290a000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_mvc1_in_ep>;
+							};
+						};
+
+						mvc1_out_port: port@1 {
+							reg = <1>;
+
+							mvc1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_mvc1_out_ep>;
+							};
+						};
+					};
+				};
+
+				mvc@290a200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc2_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_mvc2_in_ep>;
+							};
+						};
+
+						mvc2_out_port: port@1 {
+							reg = <1>;
+
+							mvc2_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_mvc2_out_ep>;
+							};
+						};
+					};
+				};
+
+				amixer@290bb00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							mixer_in1_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							mixer_in2_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							mixer_in3_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							mixer_in4_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in4_ep>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							mixer_in5_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in5_ep>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							mixer_in6_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in6_ep>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							mixer_in7_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in7_ep>;
+							};
+						};
+
+						port@7 {
+							reg = <0x7>;
+
+							mixer_in8_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in8_ep>;
+							};
+						};
+
+						port@8 {
+							reg = <0x8>;
+
+							mixer_in9_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in9_ep>;
+							};
+						};
+
+						port@9 {
+							reg = <0x9>;
+
+							mixer_in10_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in10_ep>;
+							};
+						};
+
+						mixer_out1_port: port@a {
+							reg = <0xa>;
+
+							mixer_out1_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out1_ep>;
+							};
+						};
+
+						mixer_out2_port: port@b {
+							reg = <0xb>;
+
+							mixer_out2_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out2_ep>;
+							};
+						};
+
+						mixer_out3_port: port@c {
+							reg = <0xc>;
+
+							mixer_out3_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out3_ep>;
+							};
+						};
+
+						mixer_out4_port: port@d {
+							reg = <0xd>;
+
+							mixer_out4_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out4_ep>;
+							};
+						};
+
+						mixer_out5_port: port@e {
+							reg = <0xe>;
+
+							mixer_out5_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out5_ep>;
+							};
+						};
+					};
+				};
+
+				admaif@290f000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						admaif0_port: port@0 {
+							reg = <0x0>;
+
+							admaif0_ep: endpoint {
+								remote-endpoint = <&xbar_admaif0_ep>;
+							};
+						};
+
+						admaif1_port: port@1 {
+							reg = <0x1>;
+
+							admaif1_ep: endpoint {
+								remote-endpoint = <&xbar_admaif1_ep>;
+							};
+						};
+
+						admaif2_port: port@2 {
+							reg = <0x2>;
+
+							admaif2_ep: endpoint {
+								remote-endpoint = <&xbar_admaif2_ep>;
+							};
+						};
+
+						admaif3_port: port@3 {
+							reg = <0x3>;
+
+							admaif3_ep: endpoint {
+								remote-endpoint = <&xbar_admaif3_ep>;
+							};
+						};
+
+						admaif4_port: port@4 {
+							reg = <0x4>;
+
+							admaif4_ep: endpoint {
+								remote-endpoint = <&xbar_admaif4_ep>;
+							};
+						};
+
+						admaif5_port: port@5 {
+							reg = <0x5>;
+
+							admaif5_ep: endpoint {
+								remote-endpoint = <&xbar_admaif5_ep>;
+							};
+						};
+
+						admaif6_port: port@6 {
+							reg = <0x6>;
+
+							admaif6_ep: endpoint {
+								remote-endpoint = <&xbar_admaif6_ep>;
+							};
+						};
+
+						admaif7_port: port@7 {
+							reg = <0x7>;
+
+							admaif7_ep: endpoint {
+								remote-endpoint = <&xbar_admaif7_ep>;
+							};
+						};
+
+						admaif8_port: port@8 {
+							reg = <0x8>;
+
+							admaif8_ep: endpoint {
+								remote-endpoint = <&xbar_admaif8_ep>;
+							};
+						};
+
+						admaif9_port: port@9 {
+							reg = <0x9>;
+
+							admaif9_ep: endpoint {
+								remote-endpoint = <&xbar_admaif9_ep>;
+							};
+						};
+
+						admaif10_port: port@a {
+							reg = <0xa>;
+
+							admaif10_ep: endpoint {
+								remote-endpoint = <&xbar_admaif10_ep>;
+							};
+						};
+
+						admaif11_port: port@b {
+							reg = <0xb>;
+
+							admaif11_ep: endpoint {
+								remote-endpoint = <&xbar_admaif11_ep>;
+							};
+						};
+
+						admaif12_port: port@c {
+							reg = <0xc>;
+
+							admaif12_ep: endpoint {
+								remote-endpoint = <&xbar_admaif12_ep>;
+							};
+						};
+
+						admaif13_port: port@d {
+							reg = <0xd>;
+
+							admaif13_ep: endpoint {
+								remote-endpoint = <&xbar_admaif13_ep>;
+							};
+						};
+
+						admaif14_port: port@e {
+							reg = <0xe>;
+
+							admaif14_ep: endpoint {
+								remote-endpoint = <&xbar_admaif14_ep>;
+							};
+						};
+
+						admaif15_port: port@f {
+							reg = <0xf>;
+
+							admaif15_ep: endpoint {
+								remote-endpoint = <&xbar_admaif15_ep>;
+							};
+						};
+
+						admaif16_port: port@10 {
+							reg = <0x10>;
+
+							admaif16_ep: endpoint {
+								remote-endpoint = <&xbar_admaif16_ep>;
+							};
+						};
+
+						admaif17_port: port@11 {
+							reg = <0x11>;
+
+							admaif17_ep: endpoint {
+								remote-endpoint = <&xbar_admaif17_ep>;
+							};
+						};
+
+						admaif18_port: port@12 {
+							reg = <0x12>;
+
+							admaif18_ep: endpoint {
+								remote-endpoint = <&xbar_admaif18_ep>;
+							};
+						};
+
+						admaif19_port: port@13 {
+							reg = <0x13>;
+
+							admaif19_ep: endpoint {
+								remote-endpoint = <&xbar_admaif19_ep>;
+							};
+						};
+					};
+				};
+
+				asrc@2910000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							asrc_in1_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							asrc_in2_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							asrc_in3_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							asrc_in4_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in4_ep>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							asrc_in5_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in5_ep>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							asrc_in6_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in6_ep>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							asrc_in7_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in7_ep>;
+							};
+						};
+
+						asrc_out1_port: port@7 {
+							reg = <0x7>;
+
+							asrc_out1_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out1_ep>;
+							};
+						};
+
+						asrc_out2_port: port@8 {
+							reg = <0x8>;
+
+							asrc_out2_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out2_ep>;
+							};
+						};
+
+						asrc_out3_port: port@9 {
+							reg = <0x9>;
+
+							asrc_out3_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out3_ep>;
+							};
+						};
+
+						asrc_out4_port: port@a {
+							reg = <0xa>;
+
+							asrc_out4_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out4_ep>;
+							};
+						};
+
+						asrc_out5_port: port@b {
+							reg = <0xb>;
+
+							asrc_out5_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out5_ep>;
+							};
+						};
+
+						asrc_out6_port: port@c {
+							reg = <0xc>;
+
+							asrc_out6_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out6_ep>;
+							};
+						};
+					};
+				};
 
 				ports {
 					#address-cells = <1>;
@@ -885,1113 +1984,14 @@
 						};
 					};
 				};
+			};
 
-				admaif@290f000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						admaif0_port: port@0 {
-							reg = <0x0>;
-
-							admaif0_ep: endpoint {
-								remote-endpoint = <&xbar_admaif0_ep>;
-							};
-						};
-
-						admaif1_port: port@1 {
-							reg = <0x1>;
-
-							admaif1_ep: endpoint {
-								remote-endpoint = <&xbar_admaif1_ep>;
-							};
-						};
-
-						admaif2_port: port@2 {
-							reg = <0x2>;
-
-							admaif2_ep: endpoint {
-								remote-endpoint = <&xbar_admaif2_ep>;
-							};
-						};
-
-						admaif3_port: port@3 {
-							reg = <0x3>;
-
-							admaif3_ep: endpoint {
-								remote-endpoint = <&xbar_admaif3_ep>;
-							};
-						};
-
-						admaif4_port: port@4 {
-							reg = <0x4>;
-
-							admaif4_ep: endpoint {
-								remote-endpoint = <&xbar_admaif4_ep>;
-							};
-						};
-
-						admaif5_port: port@5 {
-							reg = <0x5>;
-
-							admaif5_ep: endpoint {
-								remote-endpoint = <&xbar_admaif5_ep>;
-							};
-						};
-
-						admaif6_port: port@6 {
-							reg = <0x6>;
-
-							admaif6_ep: endpoint {
-								remote-endpoint = <&xbar_admaif6_ep>;
-							};
-						};
-
-						admaif7_port: port@7 {
-							reg = <0x7>;
-
-							admaif7_ep: endpoint {
-								remote-endpoint = <&xbar_admaif7_ep>;
-							};
-						};
-
-						admaif8_port: port@8 {
-							reg = <0x8>;
-
-							admaif8_ep: endpoint {
-								remote-endpoint = <&xbar_admaif8_ep>;
-							};
-						};
-
-						admaif9_port: port@9 {
-							reg = <0x9>;
-
-							admaif9_ep: endpoint {
-								remote-endpoint = <&xbar_admaif9_ep>;
-							};
-						};
-
-						admaif10_port: port@a {
-							reg = <0xa>;
-
-							admaif10_ep: endpoint {
-								remote-endpoint = <&xbar_admaif10_ep>;
-							};
-						};
-
-						admaif11_port: port@b {
-							reg = <0xb>;
-
-							admaif11_ep: endpoint {
-								remote-endpoint = <&xbar_admaif11_ep>;
-							};
-						};
-
-						admaif12_port: port@c {
-							reg = <0xc>;
-
-							admaif12_ep: endpoint {
-								remote-endpoint = <&xbar_admaif12_ep>;
-							};
-						};
-
-						admaif13_port: port@d {
-							reg = <0xd>;
-
-							admaif13_ep: endpoint {
-								remote-endpoint = <&xbar_admaif13_ep>;
-							};
-						};
-
-						admaif14_port: port@e {
-							reg = <0xe>;
-
-							admaif14_ep: endpoint {
-								remote-endpoint = <&xbar_admaif14_ep>;
-							};
-						};
-
-						admaif15_port: port@f {
-							reg = <0xf>;
-
-							admaif15_ep: endpoint {
-								remote-endpoint = <&xbar_admaif15_ep>;
-							};
-						};
-
-						admaif16_port: port@10 {
-							reg = <0x10>;
-
-							admaif16_ep: endpoint {
-								remote-endpoint = <&xbar_admaif16_ep>;
-							};
-						};
-
-						admaif17_port: port@11 {
-							reg = <0x11>;
-
-							admaif17_ep: endpoint {
-								remote-endpoint = <&xbar_admaif17_ep>;
-							};
-						};
-
-						admaif18_port: port@12 {
-							reg = <0x12>;
-
-							admaif18_ep: endpoint {
-								remote-endpoint = <&xbar_admaif18_ep>;
-							};
-						};
-
-						admaif19_port: port@13 {
-							reg = <0x13>;
-
-							admaif19_ep: endpoint {
-								remote-endpoint = <&xbar_admaif19_ep>;
-							};
-						};
-					};
-				};
-
-				i2s@2901000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							i2s1_cif_ep: endpoint {
-								remote-endpoint = <&xbar_i2s1_ep>;
-							};
-						};
-
-						i2s1_port: port@1 {
-							reg = <1>;
-
-							i2s1_dap_ep: endpoint {
-								dai-format = "i2s";
-								remote-endpoint = <&rt5658_ep>;
-							};
-						};
-					};
-				};
-
-				i2s@2901100 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							i2s2_cif_ep: endpoint {
-								remote-endpoint = <&xbar_i2s2_ep>;
-							};
-						};
-
-						i2s2_port: port@1 {
-							reg = <1>;
-
-							i2s2_dap_ep: endpoint {
-								dai-format = "i2s";
-								/* Place holder for external Codec */
-							};
-						};
-					};
-				};
-
-				i2s@2901300 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							i2s4_cif_ep: endpoint {
-								remote-endpoint = <&xbar_i2s4_ep>;
-							};
-						};
-
-						i2s4_port: port@1 {
-							reg = <1>;
-
-							i2s4_dap_ep: endpoint {
-								dai-format = "i2s";
-								/* Place holder for external Codec */
-							};
-						};
-					};
-				};
-
-				i2s@2901500 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							i2s6_cif_ep: endpoint {
-								remote-endpoint = <&xbar_i2s6_ep>;
-							};
-						};
-
-						i2s6_port: port@1 {
-							reg = <1>;
-
-							i2s6_dap_ep: endpoint {
-								dai-format = "i2s";
-								/* Place holder for external Codec */
-							};
-						};
-					};
-				};
-
-				dmic@2904200 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							dmic3_cif_ep: endpoint {
-								remote-endpoint = <&xbar_dmic3_ep>;
-							};
-						};
-
-						dmic3_port: port@1 {
-							reg = <1>;
-
-							dmic3_dap_ep: endpoint {
-								/* Place holder for external Codec */
-							};
-						};
-					};
-				};
-
-				sfc@2902000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							sfc1_cif_in_ep: endpoint {
-								remote-endpoint = <&xbar_sfc1_in_ep>;
-							};
-						};
-
-						sfc1_out_port: port@1 {
-							reg = <1>;
-
-							sfc1_cif_out_ep: endpoint {
-								remote-endpoint = <&xbar_sfc1_out_ep>;
-							};
-						};
-					};
-				};
-
-				sfc@2902200 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							sfc2_cif_in_ep: endpoint {
-								remote-endpoint = <&xbar_sfc2_in_ep>;
-							};
-						};
-
-						sfc2_out_port: port@1 {
-							reg = <1>;
-
-							sfc2_cif_out_ep: endpoint {
-								remote-endpoint = <&xbar_sfc2_out_ep>;
-							};
-						};
-					};
-				};
-
-				sfc@2902400 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							sfc3_cif_in_ep: endpoint {
-								remote-endpoint = <&xbar_sfc3_in_ep>;
-							};
-						};
-
-						sfc3_out_port: port@1 {
-							reg = <1>;
-
-							sfc3_cif_out_ep: endpoint {
-								remote-endpoint = <&xbar_sfc3_out_ep>;
-							};
-						};
-					};
-				};
-
-				sfc@2902600 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							sfc4_cif_in_ep: endpoint {
-								remote-endpoint = <&xbar_sfc4_in_ep>;
-							};
-						};
-
-						sfc4_out_port: port@1 {
-							reg = <1>;
-
-							sfc4_cif_out_ep: endpoint {
-								remote-endpoint = <&xbar_sfc4_out_ep>;
-							};
-						};
-					};
-				};
-
-				mvc@290a000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							mvc1_cif_in_ep: endpoint {
-								remote-endpoint = <&xbar_mvc1_in_ep>;
-							};
-						};
-
-						mvc1_out_port: port@1 {
-							reg = <1>;
-
-							mvc1_cif_out_ep: endpoint {
-								remote-endpoint = <&xbar_mvc1_out_ep>;
-							};
-						};
-					};
-				};
-
-				mvc@290a200 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							mvc2_cif_in_ep: endpoint {
-								remote-endpoint = <&xbar_mvc2_in_ep>;
-							};
-						};
-
-						mvc2_out_port: port@1 {
-							reg = <1>;
-
-							mvc2_cif_out_ep: endpoint {
-								remote-endpoint = <&xbar_mvc2_out_ep>;
-							};
-						};
-					};
-				};
-
-				amx@2903000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							amx1_in1_ep: endpoint {
-								remote-endpoint = <&xbar_amx1_in1_ep>;
-							};
-						};
-
-						port@1 {
-							reg = <1>;
-
-							amx1_in2_ep: endpoint {
-								remote-endpoint = <&xbar_amx1_in2_ep>;
-							};
-						};
-
-						port@2 {
-							reg = <2>;
-
-							amx1_in3_ep: endpoint {
-								remote-endpoint = <&xbar_amx1_in3_ep>;
-							};
-						};
-
-						port@3 {
-							reg = <3>;
-
-							amx1_in4_ep: endpoint {
-								remote-endpoint = <&xbar_amx1_in4_ep>;
-							};
-						};
-
-						amx1_out_port: port@4 {
-							reg = <4>;
-
-							amx1_out_ep: endpoint {
-								remote-endpoint = <&xbar_amx1_out_ep>;
-							};
-						};
-					};
-				};
-
-				amx@2903100 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							amx2_in1_ep: endpoint {
-								remote-endpoint = <&xbar_amx2_in1_ep>;
-							};
-						};
-
-						port@1 {
-							reg = <1>;
-
-							amx2_in2_ep: endpoint {
-								remote-endpoint = <&xbar_amx2_in2_ep>;
-							};
-						};
-
-						amx2_in3_port: port@2 {
-							reg = <2>;
-
-							amx2_in3_ep: endpoint {
-								remote-endpoint = <&xbar_amx2_in3_ep>;
-							};
-						};
-
-						amx2_in4_port: port@3 {
-							reg = <3>;
-
-							amx2_in4_ep: endpoint {
-								remote-endpoint = <&xbar_amx2_in4_ep>;
-							};
-						};
-
-						amx2_out_port: port@4 {
-							reg = <4>;
-
-							amx2_out_ep: endpoint {
-								remote-endpoint = <&xbar_amx2_out_ep>;
-							};
-						};
-					};
-				};
-
-				amx@2903200 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							amx3_in1_ep: endpoint {
-								remote-endpoint = <&xbar_amx3_in1_ep>;
-							};
-						};
-
-						port@1 {
-							reg = <1>;
-
-							amx3_in2_ep: endpoint {
-								remote-endpoint = <&xbar_amx3_in2_ep>;
-							};
-						};
-
-						port@2 {
-							reg = <2>;
-
-							amx3_in3_ep: endpoint {
-								remote-endpoint = <&xbar_amx3_in3_ep>;
-							};
-						};
-
-						port@3 {
-							reg = <3>;
-
-							amx3_in4_ep: endpoint {
-								remote-endpoint = <&xbar_amx3_in4_ep>;
-							};
-						};
-
-						amx3_out_port: port@4 {
-							reg = <4>;
-
-							amx3_out_ep: endpoint {
-								remote-endpoint = <&xbar_amx3_out_ep>;
-							};
-						};
-					};
-				};
-
-				amx@2903300 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							amx4_in1_ep: endpoint {
-								remote-endpoint = <&xbar_amx4_in1_ep>;
-							};
-						};
-
-						port@1 {
-							reg = <1>;
-
-							amx4_in2_ep: endpoint {
-								remote-endpoint = <&xbar_amx4_in2_ep>;
-							};
-						};
-
-						port@2 {
-							reg = <2>;
-
-							amx4_in3_ep: endpoint {
-								remote-endpoint = <&xbar_amx4_in3_ep>;
-							};
-						};
-
-						port@3 {
-							reg = <3>;
-
-							amx4_in4_ep: endpoint {
-								remote-endpoint = <&xbar_amx4_in4_ep>;
-							};
-						};
-
-						amx4_out_port: port@4 {
-							reg = <4>;
-
-							amx4_out_ep: endpoint {
-								remote-endpoint = <&xbar_amx4_out_ep>;
-							};
-						};
-					};
-				};
-
-				adx@2903800 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							adx1_in_ep: endpoint {
-								remote-endpoint = <&xbar_adx1_in_ep>;
-							};
-						};
-
-						adx1_out1_port: port@1 {
-							reg = <1>;
-
-							adx1_out1_ep: endpoint {
-								remote-endpoint = <&xbar_adx1_out1_ep>;
-							};
-						};
-
-						adx1_out2_port: port@2 {
-							reg = <2>;
-
-							adx1_out2_ep: endpoint {
-								remote-endpoint = <&xbar_adx1_out2_ep>;
-							};
-						};
-
-						adx1_out3_port: port@3 {
-							reg = <3>;
-
-							adx1_out3_ep: endpoint {
-								remote-endpoint = <&xbar_adx1_out3_ep>;
-							};
-						};
-
-						adx1_out4_port: port@4 {
-							reg = <4>;
-
-							adx1_out4_ep: endpoint {
-								remote-endpoint = <&xbar_adx1_out4_ep>;
-							};
-						};
-					};
-				};
-
-				adx@2903900 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							adx2_in_ep: endpoint {
-								remote-endpoint = <&xbar_adx2_in_ep>;
-							};
-						};
-
-						adx2_out1_port: port@1 {
-							reg = <1>;
-
-							adx2_out1_ep: endpoint {
-								remote-endpoint = <&xbar_adx2_out1_ep>;
-							};
-						};
-
-						adx2_out2_port: port@2 {
-							reg = <2>;
-
-							adx2_out2_ep: endpoint {
-								remote-endpoint = <&xbar_adx2_out2_ep>;
-							};
-						};
-
-						adx2_out3_port: port@3 {
-							reg = <3>;
-
-							adx2_out3_ep: endpoint {
-								remote-endpoint = <&xbar_adx2_out3_ep>;
-							};
-						};
-
-						adx2_out4_port: port@4 {
-							reg = <4>;
-
-							adx2_out4_ep: endpoint {
-								remote-endpoint = <&xbar_adx2_out4_ep>;
-							};
-						};
-					};
-				};
-
-				adx@2903a00 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							adx3_in_ep: endpoint {
-								remote-endpoint = <&xbar_adx3_in_ep>;
-							};
-						};
-
-						adx3_out1_port: port@1 {
-							reg = <1>;
-
-							adx3_out1_ep: endpoint {
-								remote-endpoint = <&xbar_adx3_out1_ep>;
-							};
-						};
-
-						adx3_out2_port: port@2 {
-							reg = <2>;
-
-							adx3_out2_ep: endpoint {
-								remote-endpoint = <&xbar_adx3_out2_ep>;
-							};
-						};
-
-						adx3_out3_port: port@3 {
-							reg = <3>;
-
-							adx3_out3_ep: endpoint {
-								remote-endpoint = <&xbar_adx3_out3_ep>;
-							};
-						};
-
-						adx3_out4_port: port@4 {
-							reg = <4>;
-
-							adx3_out4_ep: endpoint {
-								remote-endpoint = <&xbar_adx3_out4_ep>;
-							};
-						};
-					};
-				};
-
-				adx@2903b00 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							adx4_in_ep: endpoint {
-								remote-endpoint = <&xbar_adx4_in_ep>;
-							};
-						};
-
-						adx4_out1_port: port@1 {
-							reg = <1>;
-
-							adx4_out1_ep: endpoint {
-								remote-endpoint = <&xbar_adx4_out1_ep>;
-							};
-						};
-
-						adx4_out2_port: port@2 {
-							reg = <2>;
-
-							adx4_out2_ep: endpoint {
-								remote-endpoint = <&xbar_adx4_out2_ep>;
-							};
-						};
-
-						adx4_out3_port: port@3 {
-							reg = <3>;
-
-							adx4_out3_ep: endpoint {
-								remote-endpoint = <&xbar_adx4_out3_ep>;
-							};
-						};
-
-						adx4_out4_port: port@4 {
-							reg = <4>;
-
-							adx4_out4_ep: endpoint {
-								remote-endpoint = <&xbar_adx4_out4_ep>;
-							};
-						};
-					};
-				};
-
-				processing-engine@2908000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0x0>;
-
-							ope1_cif_in_ep: endpoint {
-								remote-endpoint = <&xbar_ope1_in_ep>;
-							};
-						};
-
-						ope1_out_port: port@1 {
-							reg = <0x1>;
-
-							ope1_cif_out_ep: endpoint {
-								remote-endpoint = <&xbar_ope1_out_ep>;
-							};
-						};
-					};
-				};
-
-				amixer@290bb00 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0x0>;
-
-							mixer_in1_ep: endpoint {
-								remote-endpoint = <&xbar_mixer_in1_ep>;
-							};
-						};
-
-						port@1 {
-							reg = <0x1>;
-
-							mixer_in2_ep: endpoint {
-								remote-endpoint = <&xbar_mixer_in2_ep>;
-							};
-						};
-
-						port@2 {
-							reg = <0x2>;
-
-							mixer_in3_ep: endpoint {
-								remote-endpoint = <&xbar_mixer_in3_ep>;
-							};
-						};
-
-						port@3 {
-							reg = <0x3>;
-
-							mixer_in4_ep: endpoint {
-								remote-endpoint = <&xbar_mixer_in4_ep>;
-							};
-						};
-
-						port@4 {
-							reg = <0x4>;
-
-							mixer_in5_ep: endpoint {
-								remote-endpoint = <&xbar_mixer_in5_ep>;
-							};
-						};
-
-						port@5 {
-							reg = <0x5>;
-
-							mixer_in6_ep: endpoint {
-								remote-endpoint = <&xbar_mixer_in6_ep>;
-							};
-						};
-
-						port@6 {
-							reg = <0x6>;
-
-							mixer_in7_ep: endpoint {
-								remote-endpoint = <&xbar_mixer_in7_ep>;
-							};
-						};
-
-						port@7 {
-							reg = <0x7>;
-
-							mixer_in8_ep: endpoint {
-								remote-endpoint = <&xbar_mixer_in8_ep>;
-							};
-						};
-
-						port@8 {
-							reg = <0x8>;
-
-							mixer_in9_ep: endpoint {
-								remote-endpoint = <&xbar_mixer_in9_ep>;
-							};
-						};
-
-						port@9 {
-							reg = <0x9>;
-
-							mixer_in10_ep: endpoint {
-								remote-endpoint = <&xbar_mixer_in10_ep>;
-							};
-						};
-
-						mixer_out1_port: port@a {
-							reg = <0xa>;
-
-							mixer_out1_ep: endpoint {
-								remote-endpoint = <&xbar_mixer_out1_ep>;
-							};
-						};
-
-						mixer_out2_port: port@b {
-							reg = <0xb>;
-
-							mixer_out2_ep: endpoint {
-								remote-endpoint = <&xbar_mixer_out2_ep>;
-							};
-						};
-
-						mixer_out3_port: port@c {
-							reg = <0xc>;
-
-							mixer_out3_ep: endpoint {
-								remote-endpoint = <&xbar_mixer_out3_ep>;
-							};
-						};
-
-						mixer_out4_port: port@d {
-							reg = <0xd>;
-
-							mixer_out4_ep: endpoint {
-								remote-endpoint = <&xbar_mixer_out4_ep>;
-							};
-						};
-
-						mixer_out5_port: port@e {
-							reg = <0xe>;
-
-							mixer_out5_ep: endpoint {
-								remote-endpoint = <&xbar_mixer_out5_ep>;
-							};
-						};
-					};
-				};
-
-				asrc@2910000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0x0>;
-
-							asrc_in1_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in1_ep>;
-							};
-						};
-
-						port@1 {
-							reg = <0x1>;
-
-							asrc_in2_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in2_ep>;
-							};
-						};
-
-						port@2 {
-							reg = <0x2>;
-
-							asrc_in3_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in3_ep>;
-							};
-						};
-
-						port@3 {
-							reg = <0x3>;
-
-							asrc_in4_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in4_ep>;
-							};
-						};
-
-						port@4 {
-							reg = <0x4>;
-
-							asrc_in5_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in5_ep>;
-							};
-						};
-
-						port@5 {
-							reg = <0x5>;
-
-							asrc_in6_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in6_ep>;
-							};
-						};
-
-						port@6 {
-							reg = <0x6>;
-
-							asrc_in7_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in7_ep>;
-							};
-						};
-
-						asrc_out1_port: port@7 {
-							reg = <0x7>;
-
-							asrc_out1_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_out1_ep>;
-							};
-						};
-
-						asrc_out2_port: port@8 {
-							reg = <0x8>;
-
-							asrc_out2_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_out2_ep>;
-							};
-						};
-
-						asrc_out3_port: port@9 {
-							reg = <0x9>;
-
-							asrc_out3_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_out3_ep>;
-							};
-						};
-
-						asrc_out4_port: port@a {
-							reg = <0xa>;
-
-							asrc_out4_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_out4_ep>;
-							};
-						};
-
-						asrc_out5_port: port@b {
-							reg = <0xb>;
-
-							asrc_out5_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_out5_ep>;
-							};
-						};
-
-						asrc_out6_port:	port@c {
-							reg = <0xc>;
+			dma-controller@2930000 {
+				status = "okay";
+			};
 
-							asrc_out6_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_out6_ep>;
-							};
-						};
-					};
-				};
+			interrupt-controller@2a40000 {
+				status = "okay";
 			};
 		};
 
@@ -2062,8 +2062,15 @@
 
 			ports {
 				usb2-0 {
-					mode = "host";
+					mode = "otg";
+					usb-role-switch;
 					status = "okay";
+
+					port {
+						hs_typec_p0: endpoint {
+							remote-endpoint = <&hs_ucsi_ccg_p0>;
+						};
+					};
 				};
 
 				usb2-1 {
@@ -2094,6 +2101,14 @@
 			};
 		};
 
+		usb@3550000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
+			phy-names = "usb2-0", "usb3-0";
+		};
+
 		usb@3610000 {
 			status = "okay";
 
@@ -2106,6 +2121,46 @@
 			phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3";
 		};
 
+		cec@3960000 {
+			status = "okay";
+
+			hdmi-phandle = <&sor2>;
+		};
+
+		i2c@c240000 {
+			typec@8 {
+				compatible = "cypress,cypd4226";
+				reg = <0x08>;
+				interrupt-parent = <&gpio_aon>;
+				interrupts = <TEGRA194_AON_GPIO(BB, 2) IRQ_TYPE_LEVEL_LOW>;
+				firmware-name = "nvidia,jetson-agx-xavier";
+				status = "okay";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ccg_typec_con0: connector@0 {
+					compatible = "usb-c-connector";
+					reg = <0>;
+					label = "USB-C";
+					data-role = "dual";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							hs_ucsi_ccg_p0: endpoint {
+								remote-endpoint = <&hs_typec_p0>;
+							};
+						};
+					};
+				};
+			};
+		};
+
 		i2c@c250000 {
 			status = "okay";
 
@@ -2184,75 +2239,67 @@
 							 GPIO_ACTIVE_LOW>;
 			};
 		};
-	};
 
-	pcie@14100000 {
-		status = "okay";
+		pcie@14100000 {
+			status = "okay";
 
-		vddio-pex-ctl-supply = <&vdd_1v8ao>;
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
 
-		phys = <&p2u_hsio_0>;
-		phy-names = "p2u-0";
-	};
-
-	pcie@14140000 {
-		status = "okay";
+			phys = <&p2u_hsio_0>;
+			phy-names = "p2u-0";
+		};
 
-		vddio-pex-ctl-supply = <&vdd_1v8ao>;
+		pcie@14140000 {
+			status = "okay";
 
-		phys = <&p2u_hsio_7>;
-		phy-names = "p2u-0";
-	};
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
 
-	pcie@14180000 {
-		status = "okay";
+			phys = <&p2u_hsio_7>;
+			phy-names = "p2u-0";
+		};
 
-		vddio-pex-ctl-supply = <&vdd_1v8ao>;
+		pcie@14180000 {
+			status = "okay";
 
-		phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
-		       <&p2u_hsio_5>;
-		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
-	};
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
 
-	pcie@141a0000 {
-		status = "okay";
+			phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
+			       <&p2u_hsio_5>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+		};
 
-		vddio-pex-ctl-supply = <&vdd_1v8ao>;
-		vpcie3v3-supply = <&vdd_3v3_pcie>;
-		vpcie12v-supply = <&vdd_12v_pcie>;
+		pcie@141a0000 {
+			status = "okay";
 
-		phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
-		       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
-		       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
+			vpcie3v3-supply = <&vdd_3v3_pcie>;
+			vpcie12v-supply = <&vdd_12v_pcie>;
 
-		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
-			    "p2u-5", "p2u-6", "p2u-7";
-	};
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
 
-	pcie-ep@141a0000 {
-		status = "disabled";
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
 
-		vddio-pex-ctl-supply = <&vdd_1v8ao>;
+		pcie-ep@141a0000 {
+			status = "disabled";
 
-		reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
 
-		nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
-					      GPIO_ACTIVE_HIGH>;
+			reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
 
-		phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
-		       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
-		       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+			nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+						      GPIO_ACTIVE_HIGH>;
 
-		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
-			    "p2u-5", "p2u-6", "p2u-7";
-	};
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
 
-	fan: pwm-fan {
-		compatible = "pwm-fan";
-		pwms = <&pwm4 0 45334>;
-
-		cooling-levels = <0 64 128 255>;
-		#cooling-cells = <2>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
 	};
 
 	gpio-keys {
@@ -2279,6 +2326,14 @@
 		};
 	};
 
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm4 0 45334>;
+
+		cooling-levels = <0 64 128 255>;
+		#cooling-cells = <2>;
+	};
+
 	sound {
 		compatible = "nvidia,tegra186-audio-graph-card";
 		status = "okay";
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
index 273a1ef716b6..16cf4414de59 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 
+#include <dt-bindings/gpio/tegra194-gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/input/gpio-keys.h>
 
@@ -8,16 +9,1165 @@
 		aconnect@2900000 {
 			status = "okay";
 
-			dma-controller@2930000 {
+			ahub@2900800 {
 				status = "okay";
-			};
 
-			interrupt-controller@2a40000 {
-				status = "okay";
-			};
+				i2s@2901200 {
+					status = "okay";
 
-			ahub@2900800 {
-				status = "okay";
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s3_cif_ep: endpoint {
+								remote-endpoint = <&xbar_i2s3_ep>;
+							};
+						};
+
+						i2s3_port: port@1 {
+							reg = <1>;
+
+							i2s3_dap_ep: endpoint {
+								dai-format = "i2s";
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				i2s@2901400 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s5_cif_ep: endpoint {
+								remote-endpoint = <&xbar_i2s5_ep>;
+							};
+						};
+
+						i2s5_port: port@1 {
+							reg = <1>;
+
+							i2s5_dap_ep: endpoint {
+								dai-format = "i2s";
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				sfc@2902000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc1_in_ep>;
+								convert-rate = <44100>;
+							};
+						};
+
+						sfc1_out_port: port@1 {
+							reg = <1>;
+
+							sfc1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc1_out_ep>;
+								convert-rate = <48000>;
+							};
+						};
+					};
+				};
+
+				sfc@2902200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc2_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc2_in_ep>;
+							};
+						};
+
+						sfc2_out_port: port@1 {
+							reg = <1>;
+
+							sfc2_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc2_out_ep>;
+							};
+						};
+					};
+				};
+
+				sfc@2902400 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc3_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc3_in_ep>;
+							};
+						};
+
+						sfc3_out_port: port@1 {
+							reg = <1>;
+
+							sfc3_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc3_out_ep>;
+							};
+						};
+					};
+				};
+
+				sfc@2902600 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc4_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc4_in_ep>;
+							};
+						};
+
+						sfc4_out_port: port@1 {
+							reg = <1>;
+
+							sfc4_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc4_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx1_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx1_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx1_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx1_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in4_ep>;
+							};
+						};
+
+						amx1_out_port: port@4 {
+							reg = <4>;
+
+							amx1_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx2_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx2_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in2_ep>;
+							};
+						};
+
+						amx2_in3_port: port@2 {
+							reg = <2>;
+
+							amx2_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in3_ep>;
+							};
+						};
+
+						amx2_in4_port: port@3 {
+							reg = <3>;
+
+							amx2_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in4_ep>;
+							};
+						};
+
+						amx2_out_port: port@4 {
+							reg = <4>;
+
+							amx2_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx3_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx3_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx3_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx3_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in4_ep>;
+							};
+						};
+
+						amx3_out_port: port@4 {
+							reg = <4>;
+
+							amx3_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903300 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx4_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx4_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx4_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx4_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in4_ep>;
+							};
+						};
+
+						amx4_out_port: port@4 {
+							reg = <4>;
+
+							amx4_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_out_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903800 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx1_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_in_ep>;
+							};
+						};
+
+						adx1_out1_port: port@1 {
+							reg = <1>;
+
+							adx1_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out1_ep>;
+							};
+						};
+
+						adx1_out2_port: port@2 {
+							reg = <2>;
+
+							adx1_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out2_ep>;
+							};
+						};
+
+						adx1_out3_port: port@3 {
+							reg = <3>;
+
+							adx1_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out3_ep>;
+							};
+						};
+
+						adx1_out4_port: port@4 {
+							reg = <4>;
+
+							adx1_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out4_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903900 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx2_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_in_ep>;
+							};
+						};
+
+						adx2_out1_port: port@1 {
+							reg = <1>;
+
+							adx2_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out1_ep>;
+							};
+						};
+
+						adx2_out2_port: port@2 {
+							reg = <2>;
+
+							adx2_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out2_ep>;
+							};
+						};
+
+						adx2_out3_port: port@3 {
+							reg = <3>;
+
+							adx2_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out3_ep>;
+							};
+						};
+
+						adx2_out4_port: port@4 {
+							reg = <4>;
+
+							adx2_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out4_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903a00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx3_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_in_ep>;
+							};
+						};
+
+						adx3_out1_port: port@1 {
+							reg = <1>;
+
+							adx3_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out1_ep>;
+							};
+						};
+
+						adx3_out2_port: port@2 {
+							reg = <2>;
+
+							adx3_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out2_ep>;
+							};
+						};
+
+						adx3_out3_port: port@3 {
+							reg = <3>;
+
+							adx3_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out3_ep>;
+							};
+						};
+
+						adx3_out4_port: port@4 {
+							reg = <4>;
+
+							adx3_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out4_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903b00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx4_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_in_ep>;
+							};
+						};
+
+						adx4_out1_port: port@1 {
+							reg = <1>;
+
+							adx4_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out1_ep>;
+							};
+						};
+
+						adx4_out2_port: port@2 {
+							reg = <2>;
+
+							adx4_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out2_ep>;
+							};
+						};
+
+						adx4_out3_port: port@3 {
+							reg = <3>;
+
+							adx4_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out3_ep>;
+							};
+						};
+
+						adx4_out4_port: port@4 {
+							reg = <4>;
+
+							adx4_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out4_ep>;
+							};
+						};
+					};
+				};
+
+				dmic@2904000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic1_cif_ep: endpoint {
+								remote-endpoint = <&xbar_dmic1_ep>;
+							};
+						};
+
+						dmic1_port: port@1 {
+							reg = <1>;
+
+							dmic1_dap_ep: endpoint {
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				dmic@2904100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic2_cif_ep: endpoint {
+								remote-endpoint = <&xbar_dmic2_ep>;
+							};
+						};
+
+						dmic2_port: port@1 {
+							reg = <1>;
+
+							dmic2_dap_ep: endpoint {
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				dmic@2904300 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic4_cif_ep: endpoint {
+								remote-endpoint = <&xbar_dmic4_ep>;
+							};
+						};
+
+						dmic4_port: port@1 {
+							reg = <1>;
+
+							dmic4_dap_ep: endpoint {
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				dspk@2905000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dspk1_cif_ep: endpoint {
+								remote-endpoint = <&xbar_dspk1_ep>;
+							};
+						};
+
+						dspk1_port: port@1 {
+							reg = <1>;
+
+							dspk1_dap_ep: endpoint {
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				dspk@2905100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dspk2_cif_ep: endpoint {
+								remote-endpoint = <&xbar_dspk2_ep>;
+							};
+						};
+
+						dspk2_port: port@1 {
+							reg = <1>;
+
+							dspk2_dap_ep: endpoint {
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				processing-engine@2908000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							ope1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_ope1_in_ep>;
+							};
+						};
+
+						ope1_out_port: port@1 {
+							reg = <0x1>;
+
+							ope1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_ope1_out_ep>;
+							};
+						};
+					};
+				};
+
+				mvc@290a000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_mvc1_in_ep>;
+							};
+						};
+
+						mvc1_out_port: port@1 {
+							reg = <1>;
+
+							mvc1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_mvc1_out_ep>;
+							};
+						};
+					};
+				};
+
+				mvc@290a200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc2_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_mvc2_in_ep>;
+							};
+						};
+
+						mvc2_out_port: port@1 {
+							reg = <1>;
+
+							mvc2_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_mvc2_out_ep>;
+							};
+						};
+					};
+				};
+
+				amixer@290bb00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							mixer_in1_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							mixer_in2_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							mixer_in3_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							mixer_in4_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in4_ep>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							mixer_in5_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in5_ep>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							mixer_in6_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in6_ep>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							mixer_in7_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in7_ep>;
+							};
+						};
+
+						port@7 {
+							reg = <0x7>;
+
+							mixer_in8_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in8_ep>;
+							};
+						};